337 files changed, 0 insertions, 561911 deletions

diff --git a/perl-install/.cvsignore b/perl-install/.cvsignore
deleted file mode 100644
index 5486321bd..000000000
--- a/perl-install/.cvsignore
+++ /dev/null
@@ -1,7 +0,0 @@
-.*.sw?
-debug.log
-auto_inst.cfg
-auto
-t.pm
-modparm.lst
-*.flog
diff --git a/perl-install/ChangeLog b/perl-install/ChangeLog
deleted file mode 100644
index c18841ebe..000000000
--- a/perl-install/ChangeLog
+++ /dev/null
@@ -1,18100 +0,0 @@
-2001/10/29  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: code correction
-
-2001/10/29  gbeauchesne
-
-	* rescue/list.ia64: 
-	  - Add xfs_repair and efibootmgr
-
-2001/10/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* fs.pm, loopback.pm, fsedit.pm, bootloader.pm: revert back to /initrd
-
-	* modules.pm: here too
-	CDCEther looks good, I add it
-
-2001/10/29  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/pcmcia_config.patch: adapt for new pcmcia-cs
-
-2001/10/29  sdupont
-
-	* standalone/drakfont: Copyright (C)
-	correction of warning & code cleaning.
-	the end.... i think...
-	updated
-	uninstall interface & progress bar
-	uninstall interface : lists & progress bar
-	new progress bar update
-	todo: second list
-
-2001/10/28  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: cleaning
-
-2001/10/27  daouda
-
-	* devices.pm, my_gtk.pm, Xconfig.pm: return value at end of module
-
-	* share/rpmsrate: 
-	  - increase icewm weight.
-
-2001/10/26  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakautoinst, standalone/drakfont: progress bar hack
-
-2001/10/26  Pixel  <pixel@mandrakesoft.com>
-
-	* mdk-stage1/pcmcia_config.patch: was duplicated in gi/tools
-
-	* partition_table_gpt.pm, partition_table_raw.pm: no adjust start and end
-	on GPT
-
-2001/10/26  sdupont
-
-	* standalone/drakfont: updated.
-	search correct progress bar mode implementation.
-	updated
-	fix some bugs & interface progress implementation.
-	TODO:
-	progress before backend.
-		search if directory already exist before custom install.
-
-2001/10/25  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakautoinst: simple variables handled, code compression.
-	The new and shiny drakautoinst is coming. P|-|34R
-	The new drakautoinst is coming. P|-|34R
-
-	* pixmaps/mdk_logo.png: additional logo
-
-	* standalone/drakfont: code correction
-
-2001/10/25  sdupont
-
-	* standalone/drakfont: merge differents versions.
-	file sector, list of fonts for advanced install...
-	applications choice, license widget, help widget.
-
-2001/10/24  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: updated
-	updated
-	updated, lot of bugs.
-	updated
-
-	* my_gtk.pm: added set_editable
-
-2001/10/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/lsparts, mdk-stage1/rescue-gui.c, mdk-stage1/frontend.h,
-	mdk-stage1/.cvsignore, rescue/install_bootloader,
-	rescue/tree/etc/rc.sysinit, rescue/Makefile,
-	mdk-stage1/stdio-frontend.c, rescue/guessmounts, mdk-stage1/Makefile,
-	rescue/tree/etc/issue, rescue/make_rescue_img,
-	mdk-stage1/newt-frontend.c: 
-	  - add a GUI to the rescue
-	  - provide guessmounts with better efficiency and output, go to
-	console, and reboot
-	  - provide install_bootloader which runs lilo from /mnt if it seems
-	safe
-	  - add lsparts to rescue, which prints partitions with detected types
-
-2001/10/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm: replace /initrd with /lib/initrd
-	(hds): in case of GPT, allow ext2 to be replaced by any kind of
-	partitions (esp. EFI)
-
-	* partition_table.pm, partition_table_gpt.pm, partition_table_bsd.pm,
-	partition_table_raw.pm: add methods first_usable_sector and
-	last_usable_sector
-
-	* fs.pm, loopback.pm, bootloader.pm: replace /initrd with /lib/initrd
-
-2001/10/24  sdupont
-
-	* standalone/drakfont: scroll
-	`
-	import_status & progress.
-	gi update.
-
-2001/10/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* services.pm: tagged as translatable some left out strigns
-
-2001/10/23  sdupont
-
-	* standalone/drakfont: gi update
-	doc and progress bar.
-	gui: install from directory
-	gui supported.
-
-2001/10/23  yduret
-
-	* share/po/fr.po: fixed fohtes grammar
-
-2001/10/22  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm: speedtouch config : added usa vpi vci
-
-2001/10/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: oops forgot to umount after "updatemodules"...
-
-2001/10/22  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/tree/etc/profile: fix PATH (have /mnt/bin /mnt/usr/bin ...)
-
-2001/10/21  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed connection device setting for "oki4w" driver.
-
-2001/10/19  gbeauchesne
-
-	* partition_table_gpt.pm: 
-	  - Use /dev/random through devices::make() instead of /dev/urandom
-	  - Localize file descriptor
-	  - Capitalize error message if no /dev/random found
-
-	* partition_table.pm: 
-	  - s/Win98 FAT32/FAT32/
-	  - s/Partition that contains an EFI file system/EFI (FAT-12/16/32)/
-	  - Add "FAT32" to @important_types for IA-64 & /boot/efi
-
-2001/10/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stdio-frontend.c: small fix
-
-2001/10/19  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm: OOize can_raw_add
-
-	* partition_table.pm: handle empty $hd->{primary}{raw} (happens with no
-	partitions on ia64)
-	  - raw_add, can_raw_add moved to partition_table_raw
-	  - using raw_removed
-
-	* partition_table_dos.pm: better handling of CHS overflow (mainly for non
-	cylinder-boundary aligned part (like ia64))
-
-	* partition_table_raw.pm (adjustEnd): in case the end is totalsectors,
-	don't adjust since totalsectors / cylinder_size may not be an integer
-	(zero_MBR): defaults to GPT on ia64
-	(raw_add, can_raw_add, raw_removed): created, can now be overloaded in
-	partition_table_*.pm's
-	(get_geometry): keep the total_sectors as given by c::total_sectors,
-	don't try to recompute it based on nb_cylinders (for hds where
-	total_sectors is not a multiple of nb_cylinders)
-
-	* common.pm: cleanup
-
-	* partition_table_gpt.pm: fix ending is last sector, not next one
-	add TODO for partition entry guid
-	  - writing partition table now works
-	  - creating a new partition table now works (except GUIDs generation)
-
-2001/10/18  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm: corrected GET_FL and co
-
-2001/10/18  François Pons  <fpons@mandrakesoft.com>
-
-	* standalone/XFdrake: fix ia64 glitches with /usr/X11R6/lib/X11/Cards (now
-	use rgb.txt instead).
-
-2001/10/18  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_gpt.pm: 
-	  - add checksum verif on partition entries
-	  - detect the type of partition since the partition table types seem
-	quite poor
-	read part of GPT partition table working
-
-	* fsedit.pm: 
-	  - add checksum verif on partition entries
-	  - detect the type of partition since the partition table types seem
-	quite poor
-
-	* partition_table.pm: read part of GPT partition table working
-	shorter GPT name
-
-	* detect_devices.pm: safer modprobe ide-floppy
-
-2001/10/18  sdupont
-
-	* standalone/drakfont: change Fontmap ghostscript file.
-	drakfont support now .gsf fonts
-	end of backend......
-	update
-
-2001/10/17  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draksec: typo
-
-2001/10/17  sdupont
-
-	* standalone/drakfont: implementation of type1 fonts removing.
-	ghostscript, xfs and staroffice tested and supported.
-
-2001/10/16  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draksec: correct bad level display
-
-	* standalone/interactive_http/Makefile: makes rpmlint happy
-
-2001/10/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: print checks
-
-	* rescue/tree/etc/rc.sysinit: better phrasing
-
-2001/10/16  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* rescue/devices.pl, mdk-stage1/pci-resource/update-pci-ids.pl,
-	rescue/list.ppc: typo in update kernel by /me
-	fine-tune sanity_check for ppc
-	move /dev/nvram from list.ppc to devices.pl
-
-2001/10/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2001/10/15  yduret
-
-	* scanner.pm: wonderful perl forgotten
-
-2001/10/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: have "other.img" drivers also
-	supported
-
-2001/10/12  sdupont
-
-	* standalone/drakfont: support all installations, and support xfs,
-	ghostcript, staroffice.
-	todo aplli: openoffice, gimp, abiword, netscape & other browsers...
-	todo or to see: --strong  ttmkfdir -c ???
-	emd of backend..
-
-2001/10/11  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: multiple card configuration bug corrected.
-	allelluia.
-
-	* network/tools.pm: aded use c
-
-	* standalone/drakfont: code review
-
-2001/10/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* interactive_stdio.pm, install_steps_stdio.pm: stdio mode works again
-
-2001/10/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: ensure postInstallNonRooted is done *before* ejecting cdrom
-
-2001/10/11  sdupont
-
-	* docs/drakfont/drakfont.log, docs/drakfont/drakfont.pdf,
-	docs/drakfont/drakfont.dvi: clean directory..
-
-	* docs/drakfont/drakfont.aux, docs/drakfont/dia_srcs/drakfont.dia,
-	docs/drakfont/dia_srcs/drakfont_uninstall.dia,
-	docs/drakfont/dia_srcs/drakfont_install.dia: delete all bads files...
-
-	* standalone/drakfont: improved....
-	improved && implement remove fonts for xfs
-	improved
-	improved
-	optimisation
-	correction of option install --replace
-	dialog of install options
-	correction of install option.
-
-	* docs/drakfont/drakfont.jpg, docs/drakfont/drakfont_install.jpg,
-	docs/drakfont/drakfont_uninstall.jpg, docs/drakfont/mandrake.ps: jpg &
-	ps with -kb option
-	clean...2
-
-2001/10/10  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: typo
-	improved options handling
-
-	* standalone/net_monitor: ergo and features improvments, pipe handling
-	correction
-
-	* network/tools.pm: updated
-
-2001/10/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, share/locales-skeleton.tar.bz2: enabled Maltese language
-
-2001/10/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm: normalize the default type entry ("entry")
-
-	* interactive_gtk.pm: fix typo (on clicked_may_quit)
-
-2001/10/10  sdupont
-
-	* standalone/drakfont: option replace for "install from" &
-	windows_import...
-	update install dir
-	better for --install
-	new version of drakfont. in perl langage.
-
-	* docs/drakfont/drakfont.jpg, docs/drakfont/drakfont.aux,
-	docs/drakfont/drakfont.log, docs/drakfont/drakfont.pdf,
-	docs/drakfont/drakfont.tex, docs/drakfont/Makefile,
-	docs/drakfont/drakfont_install.jpg, docs/drakfont/drakfont.dvi,
-	docs/drakfont/drakfont_uninstall.jpg, docs/drakfont/mandrake.ps: docs
-	drakfont
-
-2001/10/10  yduret
-
-	* standalone/scannerdrake: first apparition on earth..
-
-	* Makefile.config: added scannerdrake
-
-2001/10/09  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm: removed trash
-	connection test is now in background, corrects the interface freeze
-	problem
-
-	* pixmaps/net_u.png: new pixmap for draknet/net_monitor
-
-	* standalone/net_monitor, standalone/draknet: connection test is now in
-	background, corrects the interface freeze problem
-
-2001/10/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-
-2001/10/09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: fix detecting read-only drives (like memory-sticks)
-
-	* partition_table.pm: make perl_checker happy
-
-	* partition_table_raw.pm: fix detecting read-only drives (like
-	memory-sticks)
-	make perl_checker happy
-
-	* modules.pm, detect_devices.pm, install2.pm: ensure floppies() takes care
-	of usb-storage if possible, so that patch on usb floppy works
-
-2001/10/09  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm, keyboard.pm, Xconfigurator.pm: move to Linux
-	keycodes on PPC, add additional Apple modelines
-
-	* install_steps_interactive.pm: re-enable PPC bootloader setup
-
-2001/10/08  dam's  <damien@mandrakesoft.com>
-
-	* c/stuff.xs.pm: added FL_GET and FL_SET
-
-2001/10/08  François Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm: keep isp and gdth module for hd.img (as well as all.rdz) as
-	they have been
-	removed from the skip list for stage1.
-
-	* rescue/tree/etc/oem: added silly modification to avoid using more than 7
-	partition for DAC960 (/home
-	and /var are not created in the current state).
-
-2001/10/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: ia64
-
-	* mdk-stage1/Makefile: 8.1 -> cooker
-
-2001/10/08  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm, partition_table.pm: yet a few other ataraid cases
-
-2001/10/06  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* partition_table_raw.pm, partition_table.pm: updates to accomodate IBM
-	PPC systems with DOS partition table
-
-2001/10/05  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added (missing) creation of
-	/hd/boot/grub/device.map (needed for
-	CompactSmartArray).
-
-2001/10/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: kdegames : 2 -> 4
-
-2001/10/04  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fix (work around) parted problem when it refuse to
-	use all disk space for
-	partition.
-	added another psacct log file in touch.
-	fixed typo on scalar reference for psacct bug.
-	updated with 8.1 OEM ProSuite.
-
-	* tools/oem-prepare: updated with 8.1 OEM ProSuite.
-
-2001/10/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-
-2001/10/04  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_dos.pm: is little-endian, so use "V" instead of "I"
-
-2001/10/03  François Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: synced with oem script.
-	removed 3D games not installed by default.
-
-	* rescue/tree/etc/oem: fixed typo in produced patch.
-	added extension to pro suite CD (added kernel-enterprise to possibly
-	installable
-	and install kernel22).
-	removed 3D games not installed by default.
-	added missing xmms-arts.
-	allow halting.
-
-2001/10/03  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm: yet another ataraid support patch
-
-2001/10/02  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix previous hack.
-	added hack to do "/sbin/depmod -a" for NVIDIA driver.
-
-2001/10/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/probing.c: new pci-ids.h
-
-	* mdk-stage1/usb-resource/update-usb-ids.pl: better look
-
-	* share/po/fr.po: small fix
-
-	* standalone/drakgw: don't call pkgs_install when no package needs to be
-	installed
-
-2001/10/02  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm: bloody ataraid detection
-
-	* devices.pm: ataraid devices support
-
-2001/10/01  François Pons  <fpons@mandrakesoft.com>
-
-	* share/rpmsrate: fixed bad format for BOOKS used in DEVELOPMENT.
-
-	* rescue/tree/etc/oem: added CHARSET support, removed kernel22 and
-	kernel-enterprise from list of
-	package installable in oem mode, added possibility to set language on
-	/etc/oem
-	script invocation.
-
-	* install_steps_interactive.pm: avoid chooseCD on oem install.
-
-	* install_steps_gtk.pm: avoid asking for changing CD on oem install.
-
-	* install_any.pm: use $boot_medium for default medium in oem install,
-	avoid using kernel22 or
-	kernel-enterprise in oem install (space available is too tight on CD oem
-	version).
-
-	* tools/oem-prepare: synced with oem script.
-
-2001/10/01  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: reword it so that it reflects
-	what's in the marfiles
-
-2001/10/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po: updated Bulgarian file
-
-2001/09/29  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* docs/README: New adress where to find the kernel BOOT
-
-2001/09/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2001/09/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/drvinst: don't install usb keyboard drivers more than once
-	try to fix usb keyboards
-
-2001/09/27  kjx
-
-	* share/po/zh_CN.po: translating
-
-2001/09/26  gbeauchesne
-
-	* install_any.pm: 
-	  - Suggest /boot/efi on IA-64 for the first VFAT partition found,
-	instead
-	of /mnt/windows
-
-	* bootloader.pm: 
-	  - bootloader.pm (suggest): don't search for dos (or windows) boot
-	partition
-	on IA-64 since ELILO can only boot Linux.
-	  - bootloader.pm (write_lilo_conf): don't cry if we don't have
-	/boot/boot.b
-	  or boot/message on IA-64.
-
-	* rescue/list.ia64: 
-	  - Add file list for "rescue" disk
-
-	* share/list.ia64, partition_table.pm: 
-	  - partition_table.pm: Add XFS suggestion for IA-64
-	  - share/list.ia64: misc updates and additions wrt. XFS, ReiserFS
-
-2001/09/25  baudens
-
-	* share/po/fr.po: s/Linux Mandrake/Mandrake Linux/
-	Remove totally crazy translation.
-	Translators, please use your brain!
-
-2001/09/25  gbeauchesne
-
-	* partition_table.pm: 
-	  - Add ReiserFS and Ext3fs entries for IA-64
-
-2001/09/25  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (naughtyServers): cleanup comments
-
-2001/09/25  warly
-
-	* share/rpmsrate: put gtk-themes _and_ sawfish-themes to 4 so that it is
-	installed for newbie and drakfirsttime does not fail.
-	put gtk-themes to 4 so that it is installed for newbie and drakfirsttime
-	does not fail.
-
-2001/09/25  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: allow non ejectable medium to allow all
-	hdlists on the bootable medium.
-	make current boot medium already selected if multiple hdlist are on this
-	boot medium.
-
-2001/09/25  warly
-
-	* share/rpmsrate: put gtk-themes _and_ sawfish-themes to 4 so that it is
-	installed for newbie and drakfirsttime does not fail.
-	put gtk-themes to 4 so that it is installed for newbie and drakfirsttime
-	does not fail.
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* share/po/fr.po: corrected translation
-
-2001/09/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/mount.c, mdk-stage1/mount.h,
-	mdk-stage1/disk.c: hd.img now detects partition types... backport from
-	DrakX :-)
-
-2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (mount_part): fix for iso loopback mounted
-
-	* share/po/fr.po: fix
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/isdn.pm: type assignation bug fix
-	corrected type assignation
-
-	* share/po/fr.po: corrected bad translation
-
-	* standalone/draknet: corrected type assignation
-
-2001/09/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* bootloader.pm: fix add_append (there was a ) at the end of the parameter
-	value)
-
-2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
-	and Turkish files
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (mount_part): fix for iso loopback mounted
-
-	* share/po/fr.po: fix
-
-2001/09/24  warly
-
-	* share/rpmsrate: lower arkeia
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: corrected isdn firmware
-
-	* network/adsl.pm, network/isdn.pm: type assignation bug fix
-	corrected type assignation
-
-	* share/po/fr.po: corrected bad translation
-
-	* standalone/draknet: corrected type assignation
-
-2001/09/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* bootloader.pm: fix add_append (there was a ) at the end of the parameter
-	value)
-
-2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
-	and Turkish files
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix small error merging existing fstab
-
-	* share/po/fr.po: fix
-
-	* diskdrake.pm: do not propose to mount/umount removable medias (disabled
-	for now)
-
-	* diskdrake_interactive.pm: hide the supermount checkbox in standalone
-
-2001/09/24  warly
-
-	* share/rpmsrate: lower arkeia
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm, network/ethernet.pm: bug fix
-
-	* modules.pm: corrected isdn firmware
-
-	* network/isdn.pm, network/adsl.pm: type assignation bug fix
-	corrected type assignation
-
-	* standalone/draknet: corrected type assignation
-
-	* install_any.pm, rescue/tree/etc/oem: added isdn-light to be copied on hd
-	during install
-
-2001/09/24  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: deactivated Riva128 3D hw acceleration and too many
-	problems reported with it.
-
-	* share/rpmsrate: allow rpm build for non expert who choose development.
-
-	* install_steps.pm: disable wins in /etc/nsswitch.conf (after installed
-	packages).
-
-2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
-	and Turkish files
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix small error merging existing fstab
-	add "iocharset=" for cdrom
-
-	* install_steps.pm: 
-	  - disable supermount by default
-	  - cleanup nsswitch.conf wins removing
-
-	* diskdrake.pm: do not propose to mount/umount removable medias (disabled
-	for now)
-
-	* diskdrake_interactive.pm: hide the supermount checkbox in standalone
-
-2001/09/24  siegel
-
-	* share/po/de.po: new german version
-
-2001/09/24  warly
-
-	* share/rpmsrate: lower arkeia
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm, network/ethernet.pm: bug fix
-
-2001/09/24  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: deactivated Riva128 3D hw acceleration and too many
-	problems reported with it.
-
-	* share/rpmsrate: allow rpm build for non expert who choose development.
-	removed any reference to XFree86-glide-module or Glide_XXX packages.
-
-	* pkgs.pm: sort mediums by number, in allMediums() else they will be in
-	hash keys orders in
-	install_steps_interactive::chooseCD().
-
-	* install_steps.pm: disable wins in /etc/nsswitch.conf (after installed
-	packages).
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: add "iocharset=" for cdrom
-
-	* install_steps.pm: 
-	  - disable supermount by default
-	  - cleanup nsswitch.conf wins removing
-
-2001/09/24  François Pons  <fpons@mandrakesoft.com>
-
-	* share/rpmsrate: removed any reference to XFree86-glide-module or
-	Glide_XXX packages.
-
-	* pkgs.pm: sort mediums by number, in allMediums() else they will be in
-	hash keys orders in
-	install_steps_interactive::chooseCD().
-
-2001/09/24  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: File permission settings during install were not done.
-	Fixed.
-
-2001/09/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: misc typo correction
-
-	* install_steps.pm: voodoo cards don't like performing 3d accel in fb mode
-
-2001/09/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: add "Graphical Environment" in meta_class server
-
-	* share/rpmsrate: simplify (for the moment)
-	do not force X flag, have it selected for any "Graphical Environment"
-
-	* share/compssUsers, install_any.pm: do not force X flag, have it selected
-	for any "Graphical Environment"
-
-2001/09/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps.pm: voodoo cards don't like performing 3d accel in fb mode
-
-2001/09/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po, share/po/hu.po: updated Czech and Hungarian file
-
-	* share/po/zh_TW.po: updated Chinese file
-
-2001/09/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: add "Graphical Environment" in meta_class server
-
-	* fsedit.pm: add magic SWAPSPACE2
-
-	* bootloader.pm: allow bootloader on fat partitions
-
-	* share/compssUsers, share/rpmsrate, install_any.pm: do not force X flag,
-	have it selected for any "Graphical Environment"
-
-2001/09/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: version is 8.1
-
-2001/09/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bs.po: updated Bosnian file
-
-2001/09/22  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, install2.pm: 
-	  - cleanup noatime option setting
-	  - cleanup exec option setting (must noexec => 0 instead of exec => 1)
-
-	* bootloader.pm (suggest): fix kernel 2.2 secure adding in menu
-
-2001/09/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po: updated Bulgarian file
-
-2001/09/22  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (suggest): fix kernel 2.2 secure adding in menu
-
-2001/09/22  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added support for automatic /dev/... file permissions
-	setting by devfsd.
-	Improved matching of auto-detection results with database entries.
-	Given hint to the user to select the correct model when matching fails.
-
-	* printer.pm: Added support for automatic /dev/... file permissions
-	setting by devfsd.
-
-2001/09/21  François Pons  <fpons@mandrakesoft.com>
-
-	* detect_devices.pm: avoid detecting plip for live upgrade.
-
-2001/09/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: use "us" XKB file for Korean keyboard, otherwise some
-	functionality is lost
-	small fix for "vn" keyboard (enable toggle key)
-
-	* share/po/ko.po: updated Korean file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* printerdrake.pm: small fix
-
-2001/09/21  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: When one changes the driver of a freshly
-	added printer, the cursor was not pointed to the old driver, fixed.
-	Fixed paper size not set according to chosen language during
-	installation.
-
-2001/09/21  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm: typo
-
-2001/09/21  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: reworked medium management.
-	moved com_license to parent package (as code that show the license is
-	now
-	available even for non gtk install).
-
-	* Xconfigurator.pm: S3 ViRGE is a bad card for testing on live upgrade.
-
-	* pkgs.pm, install_any.pm: reworked medium management.
-
-	* detect_devices.pm: avoid detecting plip for live upgrade.
-
-	* install_steps_interactive.pm: avoid keeping testing code.
-	reworked medium management.
-	added code to support changeable cdrom, set a unique copy of license for
-	installing commercial application as package variable (exported).
-
-2001/09/21  gbeauchesne
-
-	* share/po/no.po: remove trailing '\n'
-
-2001/09/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po, share/po/no.po: updated pot file
-	updated pot file
-	updated Norwegian and Hungarian files
-	updated pot file
-
-	* help.pm: updated help file
-
-	* share/po/help_xml2pm.pl: updated pot file
-
-	* printerdrake.pm: small fix
-	changed text strings to be more translator friendly
-	(NEVER EVER cut a phrase)
-
-	* share/po/zh_CN.po, share/po/ru.po, share/po/vi.po: updated pot file
-	updated pot file
-	corrected extra \n
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-	updated pot file
-	updated pot file
-
-	* keyboard.pm: adapted keyboard priority numbers (it is useless to give a
-	multichoice with a
-	value higher than 90)
-
-	* share/po/zh_TW.po: updated pot file
-	updated pot file
-
-2001/09/21  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: write password in lilo.conf even if it's also done by
-	msec, otherwise lilo will fail with restricted only
-
-	* install_steps.pm: Ensure $o->{superuser}{name} is temporary
-
-	* share/rpmsrate, install_any.pm: add HIGH_SECURITY flag, use it for
-	libsafe and kernel22-secure
-
-2001/09/21  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Added a forgotten "_( ... )".
-
-2001/09/21  warly
-
-	* share/rpmsrate: add gnomemeeting and openmcu
-
-2001/09/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm (partition_with_diskdrake): ensure the $::expert
-	flag modifications in
-	diskdrake do not escape from diskdrake
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): do not propose
-	check bad blocks for xfs and jfs
-
-2001/09/20  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: don't reapply the conf, if already applied.
-	usefull for dhcp, because the network should be restarted after
-	configured
-
-	* network/adsl.pm: test if microcode is there
-
-	* bootlook.pm: removed blocking die
-
-2001/09/20  fcrozat
-
-	* share/rpmsrate: Add gnome-user-docs to GNOME install
-	Install Mdk eazel engine for gnome
-
-2001/09/20  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: take care not probing in /dev/ for finding package to upgrade,
-	this cause
-	problem in live_upgrade.
-
-	* Xconfigurator.pm: added VideoRam for ET 6x00 card.
-
-	* network/netconnect.pm: tried to fix damien sucking.
-
-2001/09/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: misc
-
-2001/09/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-	* share/po/cs.po: updated Czech file
-
-	* share/po/nl.po, share/po/da.po, share/po/zh_TW.po: updated Danish,
-	Chinese and Dutch files
-
-2001/09/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm (partition_with_diskdrake): ensure the $::expert
-	flag modifications in
-	diskdrake do not escape from diskdrake
-
-	* share/rpmsrate: raise i18n fonts
-
-	* fsedit.pm (hds): do a get_major_minor where needed
-
-	* lang.pm: replace xcin by chinput as per Alex request
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): do not propose
-	check bad blocks for xfs and jfs
-
-2001/09/20  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed flow of the program for the "recommended" mode of
-	the installation.
-
-2001/09/20  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: don't reapply the conf, if already applied.
-	usefull for dhcp, because the network should be restarted after
-	configured
-
-	* mouse.pm: text positionning
-
-	* standalone/net_monitor: less gethostbyname
-
-2001/09/20  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: take care not probing in /dev/ for finding package to upgrade,
-	this cause
-	problem in live_upgrade.
-
-	* network/netconnect.pm: tried to fix damien sucking.
-
-2001/09/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po, share/po/da.po, share/po/zh_TW.po: updated Danish,
-	Chinese and Dutch files
-
-2001/09/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: raise i18n fonts
-	s/telnet-server/telnet-server-krb5/
-
-	* fsedit.pm (hds): do a get_major_minor where needed
-
-	* fs.pm (add2all_hds): allow both "smbfs" and "smb" as fs type
-
-	* lang.pm: replace xcin by chinput as per Alex request
-
-	* printerdrake.pm: back out the modif from till as asked by till
-
-2001/09/20  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Make it possible to configure more than 1 printer in a
-	"recommended" mode installation.
-
-2001/09/19  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/netconnect.pm, network/ethernet.pm: network
-	restart at better place
-
-2001/09/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: chromium and tuxracer don't work well with Riva
-
-2001/09/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: updated pot file
-	updated help xml
-
-	* help.pm: updated help file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/bg.po, share/po/sr.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po,
-	share/po/sv.po, share/po/hu.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po,
-	share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/de.po:
-	updated help xml
-
-	* share/po/wa.po: updated pot file
-	updated pot file
-
-2001/09/19  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/netconnect.pm, network/ethernet.pm: network
-	restart at better place
-
-2001/09/19  fcrozat
-
-	* share/rpmsrate: Add mdk-eazel-engine
-
-	* share/po/fr.po: Fix french mistakes
-
-2001/09/19  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added code to check if package are really installed.
-
-	* Xconfigurator.pm: Rage 128 doesn't like XF3 at all.
-	make only bad card Riva128 for testing XF4.
-	Riva128 is now a bad card.
-
-2001/09/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: raklet quoting
-
-	* share/rpmsrate: chromium and tuxracer don't work well with Riva
-
-2001/09/19  Pixel  <pixel@mandrakesoft.com>
-
-	* loopback.pm (create): don't use seek to create big files otherwise you
-	get hole and
-	swapon doesn't like it
-
-	* any.pm (ask_users): default icon "man"
-
-	* lang.pm: compatibility with older $o->{lang} names (for auto_installs)
-
-	* install2.pm: initial support for server install
-	compatibility with older $o->{lang} names (for auto_installs)
-
-	* install_steps_gtk.pm: initial support for server install
-
-	* printerdrake.pm: help perl_checker
-
-	* pkgs.pm, share/rpmsrate, install_any.pm: 
-	  - gmc instead of nautilus for non-latin1 installs
-	  - introduce CHARSET flag and use it
-
-2001/09/19  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Network is now only required (and checked) for remote
-	printers.
-	Several buglets fixed in remote CUPS server dialog.
-
-	* printerdrake.pm: Removed a forgotten debug help line from the code.
-	Fixed typo in dialog text of high/paranoid security.
-	Network is now only required (and checked) for remote printers.
-	Several buglets fixed in remote CUPS server dialog.
-
-2001/09/18  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: don't ask to connect if lan or dhcp
-
-2001/09/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install2.pm: don't create bootdisk by default
-
-	* share/po/fr.po: misc
-
-2001/09/18  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (write_passwd_user): fix setting "pw" field (for auto_installs)
-
-	* install_steps_gtk.pm, pkgs.pm: tentative to correct install time for big
-	installs
-
-2001/09/18  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, my_gtk.pm: corrected Speedtouch -> speedtouch
-
-	* network/netconnect.pm: don't ask to connect if lan or dhcp
-
-	* standalone/drakgw: debug
-
-2001/09/18  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added X group with SYSTEM.
-	finally work arounded rpm bug by flepied.
-
-	* detect_devices.pm: added back full pci probe for stage2 command lspci.
-	removed full pci probe for stringlist (used for generating report_bug).
-
-	* install_steps_interactive.pm: now finally really fixed printer label in
-	summary dialog.
-	fixed printer description in summary (again).
-	fixed no printer displayed (at least, print Remote CUPS server).
-
-	* commands.pm: make lspci a full pci probe instead of safe pci probe.
-
-2001/09/18  gbeauchesne
-
-	* Xconfigurator.pm: 
-	  - Force XFree 4 on IA-64. No XFree 3.3.X there...
-
-	* tools/ia64/elilo.efi: 
-	  - elilo 3.1
-
-2001/09/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install2.pm: don't create bootdisk by default
-
-	* standalone/drakautoinst: have "manual" and "replay" translated
-
-	* share/po/fr.po: misc
-
-2001/09/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po, share/po/hu.po: updated Dutch and Hungarian files
-
-2001/09/18  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm, share/gen_locales.sh, share/locales-skeleton.tar.bz2: 
-	  - remove ISO-8859-5, KOI8-R and KOI8-U
-	  - cleanup packdrake extracting locales
-	  - cleanup/fixes lang.pm
-
-	* install_steps.pm: fix setting kdmrc for latin1
-
-	* any.pm (write_passwd_user): fix setting "pw" field (for auto_installs)
-
-	* install_steps_gtk.pm, pkgs.pm: tentative to correct install time for big
-	installs
-
-2001/09/17  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/list: updated for rpm 4.0.3.
-
-	* rescue/tree/etc/oem: updated for 8.1, contains workaround for bug of
-	"rpm --root" but need more testing.
-
-	* standalone/XFdrake: removed comment.
-	added support to configure NVIDIA driver if everything is correctly
-	installed.
-
-2001/09/17  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, fsedit.pm: 
-	  - '--' to separate options for supermount + small workaround (ro and
-	exec before --)
-	  - fix nfs in manualFstab (for auto_installs, reported by David
-	Eastcott)
-
-2001/09/17  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Fixed bug of /etc/foomatic/defaultspooler not been written
-	in expert install.
-
-2001/09/17  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: no expert mode needed to choose gateway
-
-2001/09/17  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/list: updated for rpm 4.0.3.
-
-	* rescue/tree/etc/oem: updated for 8.1, contains workaround for bug of
-	"rpm --root" but need more testing.
-
-	* printerdrake.pm: add eval around installing lexmark-driver
-	(proprietary).
-
-	* Xconfigurator.pm: deactivating bad card test (too).
-
-	* standalone/XFdrake: removed comment.
-	added support to configure NVIDIA driver if everything is correctly
-	installed.
-
-2001/09/17  odin
-
-	* share/po/fr.po: updated fr.po
-
-2001/09/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: Added choice of "English|Ireland (euro)" so people wanting
-	English language but also euro symbol can choose it.
-	fixed Belgian keyboard
-
-	* share/po/fr.po, share/po/wa.po, share/po/es.po: updated Spanish and
-	Wallon files; corrected error syntax in French file
-
-	* lang.pm: Added choice of "English|Ireland (euro)" so people wanting
-	English language but also euro symbol can choose it.
-
-2001/09/17  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: 
-	  - '--' to separate options for supermount + small workaround (ro and
-	exec before --)
-	  - fix nfs in manualFstab (for auto_installs, reported by David
-	Eastcott)
-	(mount): do not hand update /etc/mtab for nfs mounts, already done by
-	mount(8)
-	(set_default_options): disable iocharset= and codepage= for supermount
-
-	* partition_table.pm (adjust_main_extended): do not use linux extended
-
-	* detect_devices.pm (pci_probe): log full pci probes
-
-	* standalone/drakbug_report: fix
-
-	* fsedit.pm: 
-	  - '--' to separate options for supermount + small workaround (ro and
-	exec before --)
-	  - fix nfs in manualFstab (for auto_installs, reported by David
-	Eastcott)
-
-2001/09/17  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Fixed bug of /etc/foomatic/defaultspooler not been written
-	in expert install.
-	Do not die when "chkconfig" fails (needed for "security_check").
-	Added "-q" option to foomatic-configure (should not get interactive).
-	Added handling of high and paranoid security levels.
-
-	* printerdrake.pm: /etc/foomatic/defaultspooler was not written in expert
-	mode installation.
-	Added handling of high and paranoid security levels.
-
-2001/09/17  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: add eval around installing lexmark-driver
-	(proprietary).
-
-2001/09/17  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (pci_probe): log full pci probes
-
-	* fs.pm (set_default_options): disable iocharset= and codepage= for
-	supermount
-
-2001/09/17  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: add eval around installing lexmark-driver
-	(proprietary).
-
-2001/09/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2001/09/17  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (pci_probe): log full pci probes
-
-2001/09/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
-
-	* pkgs.pm (read_rpmsrate): fix bug
-
-2001/09/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Fixed bug which prevented from printing the option list
-	during install.
-	Fixed bug which prevents printerdrake from running without PDQ
-	installed.
-
-2001/09/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
-	more up to my need ALL flag in compssUsersChoice
-	remove auto-install special case (initialisation of compssUsersChoice)
-
-	* share/rpmsrate: 
-	  - cleanup packages appearing twice in rpmsrate
-	  - handle a few case of packages appearing twice
-	  - special case for packages appearing in INSTALL section (flag
-	dropped)
-	  - new special flag ALL for compssUsersChoice
-
-	* pkgs.pm: more up to my need ALL flag in compssUsersChoice
-	  - cleanup packages appearing twice in rpmsrate
-	  - handle a few case of packages appearing twice
-	  - special case for packages appearing in INSTALL section (flag
-	dropped)
-	  - new special flag ALL for compssUsersChoice
-
-	* rescue/make_rescue_img: use new mkdir_p, rm_rf and cp_af from
-	MDK::Common
-
-2001/09/16  siegel
-
-	* share/po/help_xml2pm.pl: added "systemitem"
-
-2001/09/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Fixed bug which prevents printerdrake from running without
-	PDQ installed.
-
-2001/09/16  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm, my_gtk.pm: bugfix + cosmetic changes
-
-2001/09/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help.pm file
-
-	* share/po/hu.po: updated Hungarian file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2001/09/16  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: "please click on ..." for removable, nfs, smb.
-
-	* fsedit.pm: enhance lvm handling (mostly standalone)
-	  - cleanup & enhance raid mdstat reading (now works with or without
-	devfs mounted)
-	  - chunk size is buggy?
-
-	* install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
-	more up to my need ALL flag in compssUsersChoice
-	remove auto-install special case (initialisation of compssUsersChoice)
-	use new mkdir_p, rm_rf and cp_af from MDK::Common
-
-	* share/rpmsrate: 
-	  - cleanup packages appearing twice in rpmsrate
-	  - handle a few case of packages appearing twice
-	  - special case for packages appearing in INSTALL section (flag
-	dropped)
-	  - new special flag ALL for compssUsersChoice
-
-	* verify_c: add special case for c::to_utf8
-
-	* pkgs.pm: more up to my need ALL flag in compssUsersChoice
-	  - cleanup packages appearing twice in rpmsrate
-	  - handle a few case of packages appearing twice
-	  - special case for packages appearing in INSTALL section (flag
-	dropped)
-	  - new special flag ALL for compssUsersChoice
-	use new mkdir_p, rm_rf and cp_af from MDK::Common
-
-	* services.pm, install2.pm, lang.pm, commands.pm, loopback.pm,
-	tinyfirewall.pm, raid.pm, keyboard.pm, printerdrake.pm, fs.pm, mouse.pm,
-	network/netconnect.pm, timezone.pm, network/adsl.pm, install_steps.pm,
-	any.pm, printer.pm, rescue/make_rescue_img, bootloader.pm: use new
-	mkdir_p, rm_rf and cp_af from MDK::Common
-
-	* diskdrake_interactive.pm, lvm.pm: enhance lvm handling (mostly
-	standalone)
-
-	* devices.pm (make): ensure it never returns a non-absolute name
-	(it happened with make("foo") when cwd=/dev and /dev/foo existed)
-
-2001/09/16  siegel
-
-	* share/po/help_xml2pm.pl: added "systemitem"
-	added commet explainig that help.pm is automatically generated.
-
-	* .cvsignore: added .*.sw? for vim users
-
-2001/09/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Added possibility to list command line
-	options for the printers and to give the users help for printing
-	Fixed bug of sometimes appearing the wron dialog after printing test
-	pages
-
-2001/09/15  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix options appearing twice in fstab
-
-	* install_steps.pm, any.pm, c/stuff.pm: i18n kdmrc
-
-	* lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
-	installs)
-
-	* install_steps_auto_install.pm (enteringStep): do not translate in
-	ja|ko|zh
-
-2001/09/15  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix options appearing twice in fstab
-
-	* install_steps.pm, any.pm, c/stuff.pm: i18n kdmrc
-
-	* lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
-	installs)
-
-	* install_steps_auto_install.pm (enteringStep): do not translate in
-	ja|ko|zh
-
-2001/09/15  civileme
-
-	* help.pm: Added a dialog in English for users selecting a printing system
-	since no other
-	OS seems to offer such a choice during install.
-
-2001/09/15  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: better connection testing
-
-	* network/tools.pm: more timeout
-
-	* network/adsl.pm: avoid asking 2 times to restart the ethernet card
-
-	* mouse.pm: readded darea realization
-
-2001/09/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/rpmsrate: make gtk-themes installed when Gnome is choosen
-
-	* share/po/es.po: updated Spanish file
-
-	* share/po/wa.po, share/po/hu.po: updated Hungarian file
-
-2001/09/15  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile.config, tools/Makefile: add aewm-drakx
-
-	* install_steps_gtk.pm: makes cancel on mouse selection works even better
-	  - add and use aewm-drakx
-	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
-	know they don't need keyboard focus
-	  - add some more title to ease debugging (when aewm-drakx is in debug
-	mode)
-
-	* install_gtk.pm, tools/aewm-drakx/Makefile, tools/aewm-drakx/misc.c,
-	tools/aewm-drakx/README: 
-	  - add and use aewm-drakx
-	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
-	know they don't need keyboard focus
-	  - add some more title to ease debugging (when aewm-drakx is in debug
-	mode)
-
-	* any.pm: i18n kdmrc
-	fix user icons choice
-	  - add and use aewm-drakx
-	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
-	know they don't need keyboard focus
-	  - add some more title to ease debugging (when aewm-drakx is in debug
-	mode)
-
-	* install2.pm: don't warn if modules are missing when testing
-
-	* bootloader.pm: find error in /tmp/.error only if exception is "xxx
-	failed"
-	(write_lilo_conf): ensure linear and lba32 are not both set
-
-	* share/po/fake_c.pl: fix a tricky hack
-
-	* my_gtk.pm: do the set_events before the show otherwise gtk go crazy (no
-	more keyboard focus)
-
-	* c/stuff.pm: i18n kdmrc
-
-	* lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
-	installs)
-
-	* install_steps_interactive.pm: fix typo
-	find error in /tmp/.error only if exception is "xxx failed"
-	makes cancel on mouse selection works even better
-	fix cancel on mouse choice
-
-	* install_steps.pm: i18n kdmrc
-	enable supermount again
-
-	* network/adsl.pm: correct dams typo
-
-	* fs.pm (write_fstab): fix supermount moving from options to fstype
-
-	* steps.pm: find error in /tmp/.error only if exception is "xxx failed"
-
-	* tools/aewm-drakx/aewm.h, tools/aewm-drakx/client.c,
-	tools/aewm-drakx/events.c, tools/aewm-drakx/aewm-drakx.c: set_focus on
-	new map_request event (fix summary step)
-	  - add and use aewm-drakx
-	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
-	know they don't need keyboard focus
-	  - add some more title to ease debugging (when aewm-drakx is in debug
-	mode)
-
-	* install_steps_auto_install.pm (enteringStep): do not translate in
-	ja|ko|zh
-
-2001/09/15  siegel
-
-	* share/po/de.po: fixed another typo
-	new string
-
-	* printerdrake.pm: added missing _()
-
-	* standalone/draksec: use " instead of ' to get i18n
-
-	* standalone/draknet: fixed missing _()
-
-2001/09/15  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added the PDQ panic button.
-	Removed a superfluous "set_help" line.
-	Save default spooler at program start, fixed typos in comments.
-	Command line commands as "lpr", "lpq", ... are mapped to the correct
-	spooler now.
-	Fixed bug of a waiting message appearing together with a dialog
-	Cleaned up variables to correctly switch between CUPS/Foomatic/Raw type
-	for a printer
-
-	* printer.pm: Added the PDQ panic button.
-	Command line commands as "lpr", "lpq", ... are mapped to the correct
-	spooler now.
-
-	* standalone/printerdrake: Fixed bug of spooler choice via command line
-	options being ignored.
-
-2001/09/15  warly
-
-	* share/rpmsrate: add drakfirsttime
-
-2001/09/14  dam's  <damien@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: make test_pms happy
-
-	* install_any.pm: pptp-adsl instead of pptp-adsl-fr
-
-	* Xconfigurator.pm: no shadow when X test
-
-	* standalone.pm: bugfix
-
-	* my_gtk.pm: no icon if wizard
-	no shadow when X test
-	shadow color
-
-	* bootlook.pm: bugfix
-	iautologin correction
-
-	* mouse.pm: trying to remove draw
-
-	* network/adsl.pm: debug
-	pptp-adsl instead of pptp-adsl-fr
-	bugfix
-	updated speedtouch handling.
-
-2001/09/14  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: removed S3 ViRGE card from card with problem with
-	frame buffer as it works fine.
-
-	* Xconfigurator.pm: fixed filtering of depth for newt version.
-	depth 24 is used for DRI for Rage 128 and Radeon instead of Depth 32 (as
-	depth
-	32 simply doesn't work, even if DRI guide says it works :-) 24 bit works
-	fine
-	for Rage 128.
-	apply restriction on depth available when changing resolution, removed
-	S3 ViRGE
-	from experimental 3D accelerated card list as it really does not work,
-	allow on
-	second pass to change card configuration to choose server (experimental
-	server
-	are still only available to expert), added support for UseCCEFor2D for
-	Rage 128
-	card if a TV card is installed (set to true, else set to false), added
-	support
-	for Rage Mobility M... card that are Rage 128 Mobile chipset, improved
-	error
-	message display to catch only appropriate error message of XFree 4.1.0
-	only,
-	added support for 32 bits for DRI using Matrox card, improved info
-	message with
-	real version of XFree used (anybody) and identifier from PCI probe
-	(expert).
-
-2001/09/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/insmod-busybox/Makefile: clean also cleans the DIET target
-
-	* mdk-stage1/Makefile, mdk-stage1/Makefile.mkinitrd_helper: back to using
-	a reduced form of mkinitrd_helper for mkinitrd (only
-	to provide a dietlibc-enabled static insmod)
-
-2001/09/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po: updated Walloon file
-
-	* share/po/ko.po: updated Korean file
-
-	* share/po/da.po: updated Danish file
-	updated Danish file
-
-	* share/po/bs.po, share/po/sv.po: updated Bosnian and Swedish files
-
-2001/09/14  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_raw.pm, install_any.pm: when testing for bad drives, if
-	opening for writing fails, remove the drive from the hard drive list
-	(useful for Smartmedia readers)
-
-	* pkgs.pm: update correctSize and invCorrectSize (now linear)
-
-	* share/po/fr.po: fix odin bug (please run msgfmt before committing!)
-
-	* share/rpmsrate: do not install Aurora in russian
-
-2001/09/14  siegel
-
-	* share/po/de.po: updates
-
-	* standalone/drakautoinst: Check exisence of "/root/replay_install.img"
-	before anything else ...
-
-2001/09/14  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added "set_help" lines for installer help texts.
-	Raw queue entry added, so cursor not always on "Alps MD-1000" when no
-	printer
-	detected.
-	Resolved conflict.
-	Now it is checked whether the network is configured and running.
-	draknet is called when the network is not configured.
-	It is checked whether the spooler is automatically started at boot.
-	The oki4daemon is started when needed.
-	Lexmarks inkjet drivers are fully integrated.
-	The permissions of the device files are set so that normal users can
-	print with PDQ.
-
-	* standalone/printerdrake: Fixed spooler selection by command line.
-
-	* printer.pm: Raw queue entry added, so cursor not always on "Alps
-	MD-1000" when no printer
-	detected.
-	Made network checking working on non-english systems.
-	Now it is checked whether the network is configured and running.
-	draknet is called when the network is not configured.
-	It is checked whether the spooler is automatically started at boot.
-	The oki4daemon is started when needed.
-	Lexmarks inkjet drivers are fully integrated.
-	The permissions of the device files are set so that normal users can
-	print with PDQ.
-
-2001/09/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po, share/po/tr.po: updated Turkish and Bulgarian files
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/eu.po, share/po/az.po,
-	share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po,
-	share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-2001/09/13  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: added mt-st to ARCHIVING
-
-2001/09/13  odin
-
-	* share/po/fr.po: updated up to 6648
-
-2001/09/13  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: new migration feature for creation of
-	partitions on existing mount points
-
-	* diskdrake.pm: 
-	  - add back shortcuts
-	  - red colored buttons in nfs/smb/removable
-
-2001/09/13  dam's  <damien@mandrakesoft.com>
-
-	* pixmaps/wiz_default_up.png, pixmaps/wiz_draknet.png: updated
-
-	* my_gtk.pm: updated
-	addde /usr/share/icons in path for pixmaps search
-	shadow reduced to 5 pixels
-
-	* standalone/draknet, network/isdn.pm: isdn timeout works now.
-
-2001/09/13  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: added mt-st to ARCHIVING
-
-2001/09/13  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: removed ugly Modeline 1024x768 which causes
-	trouble to XFree86 4.1.0.
-
-	* Xconfigurator.pm: fix for missing Xinerama for Matrox cards.
-	fix for Matrox G550 support, now add DRI support.
-	disable any question to user about XF3 if he choose a dual head
-	configuration.
-	disable DRI if Xinerama has been chosen.
-	updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
-	Tseng ET6\d00.
-
-	* install_any.pm: updates 3D category according Matrox G550 and Radeon
-	card.
-
-	* install_steps.pm: synced with Xconfigurator bad_card class of video card
-	to avoid using frame
-	buffer, added ET6\d00 style card which seems to have problem.
-
-2001/09/13  odin
-
-	* share/po/fr.po: updated up to 6648
-	updated fr.po
-
-2001/09/13  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: add krozat
-
-	* any.pm (inspect): use a safer dir when standalone
-
-	* install_steps.pm: extend disable KDE GreetString to
-	ja|ko|zh|ru|th|vi|be|bg
-	do not translate kdm GreetString in ja|ko|zh (what about ru?)
-	in kdmrc GreetString, magic string HOSTNAME replaced by %n
-
-	* diskdrake_interactive.pm: new migration feature for creation of
-	partitions on existing mount points
-
-	* diskdrake.pm: 
-	  - add back shortcuts
-	  - red colored buttons in nfs/smb/removable
-
-	* partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
-	the fly without rebooting on a device with some already mounted
-	partitions)
-
-	* install_steps_interactive.pm (selectKeyboard): don't prompt in newbie
-	mode if >=90, not >90
-
-2001/09/13  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: shadow reduced to 5 pixels
-
-	* standalone/draknet, network/isdn.pm: isdn timeout works now.
-
-2001/09/13  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix for missing Xinerama for Matrox cards.
-	fix for Matrox G550 support, now add DRI support.
-	disable any question to user about XF3 if he choose a dual head
-	configuration.
-	disable DRI if Xinerama has been chosen.
-	updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
-	Tseng ET6\d00.
-	avoid creating /etc/X11/XF86Config* file if --g_auto_install.
-
-	* services.pm: updated repartition of services into category, network
-	category are commented so
-	that service will to "Other" one.
-
-	* Xconfigurator_consts.pm: removed ugly Modeline 1024x768 which causes
-	trouble to XFree86 4.1.0.
-
-	* install_any.pm: updates 3D category according Matrox G550 and Radeon
-	card.
-
-	* install_steps.pm: synced with Xconfigurator bad_card class of video card
-	to avoid using frame
-	buffer, added ET6\d00 style card which seems to have problem.
-
-2001/09/13  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm: filtered the list from lang2keyboard to display only valid
-	keyboards
-
-	* c/stuff.xs.pm: add partition adding on the fly trick
-
-	* partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
-	the fly without rebooting on a device with some already mounted
-	partitions)
-
-	* install_steps.pm: do not translate kdm GreetString in ja|ko|zh (what
-	about ru?)
-	in kdmrc GreetString, magic string HOSTNAME replaced by %n
-
-2001/09/13  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet, network/isdn.pm: isdn timeout works now.
-
-2001/09/13  François Pons  <fpons@mandrakesoft.com>
-
-	* lang.pm: fixed bad $localedir in load_mo().
-
-	* g_auto_install: updated so that this scripts is running again.
-
-	* install2.pm: do not output error message for bad kernel if using
-	--g_auto_install.
-
-	* install_steps_interactive.pm: fixed Printer name reporting for a
-	specific printer.
-
-	* install_any.pm: updates 3D category according Matrox G550 and Radeon
-	card.
-
-	* services.pm: updated repartition of services into category, network
-	category are commented so
-	that service will to "Other" one.
-
-	* live_install2: updated #! as ../perl is not used.
-
-	* my_gtk.pm: synced with --g_auto_install mode.
-
-	* install_steps.pm: synced with Xconfigurator bad_card class of video card
-	to avoid using frame
-	buffer, added ET6\d00 style card which seems to have problem.
-
-	* Xconfigurator.pm: fix for Matrox G550 support, now add DRI support.
-	disable any question to user about XF3 if he choose a dual head
-	configuration.
-	disable DRI if Xinerama has been chosen.
-	updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
-	Tseng ET6\d00.
-	avoid creating /etc/X11/XF86Config* file if --g_auto_install.
-	synced with --g_auto_install mode.
-	disable testing with all SiS card except SiS 630 under XF4.
-
-2001/09/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/pl.po, share/po/pt.po, share/po/no.po,
-	share/po/th.po, share/po/sr.po, share/po/sk.po, share/po/lt.po,
-	share/po/ru.po, share/po/pt_BR.po, share/po/ko.po, share/po/lv.po,
-	share/po/uk.po, share/po/nl.po, share/po/ja.po, share/po/sv.po,
-	share/po/id.po: updated pot file
-
-2001/09/13  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm: filtered the list from lang2keyboard to display only valid
-	keyboards
-
-	* c/stuff.xs.pm: add partition adding on the fly trick
-
-	* partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
-	the fly without rebooting on a device with some already mounted
-	partitions)
-
-	* install2.pm (selectKeyboard): remove code causing
-	install_steps::selectKeyboard to be skipped
-
-	* install_steps.pm: do not translate kdm GreetString in ja|ko|zh (what
-	about ru?)
-	in kdmrc GreetString, magic string HOSTNAME replaced by %n
-
-2001/09/12  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: typo
-	new color for shadow
-	corrected shadow handling
-	no shadow if liveupdate
-
-	* share/help.png: new help
-
-	* mouse.pm: removed debug code
-
-	* network/tools.pm, network/netconnect.pm, network/ethernet.pm,
-	network/isdn.pm, network/adsl.pm, network/modem.pm: new default
-	connection handling
-
-	* standalone.pm: added wait message while installing package
-
-2001/09/12  daouda
-
-	* standalone/drakbug_report: add Mandrake release section
-
-2001/09/12  fcrozat
-
-	* share/rpmsrate: Fix gnome install
-
-2001/09/12  François Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: removed obsolete --nocpi flag for install2.
-	avoid probing usb device (for mouse) if --noauto is given.
-
-	* install_steps.pm: disabled frame buffer for most of the SiS display card
-	except SiS 630.
-
-	* Xconfigurator.pm: added MGA G550 as always having two head.
-
-	* live_install2: fix when switching perl version.
-
-	* live_install: use system perl instead.
-
-2001/09/12  gbeauchesne
-
-	* share/list.ia64, share/list, share/list.i386: 
-	  - list (/sbin/mkfs.jfs, /sbin/mkfs.xfs): Move to...
-	  - list.i386: ... Here.
-	  - list.ia64: Updates.
-
-2001/09/12  odin
-
-	* share/po/fr.po: updated fr.po
-
-2001/09/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/zh_CN.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
-	share/po/et.po, share/po/el.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/hr.po, share/po/vi.po, share/po/ca.po,
-	share/po/gl.po, share/po/eo.po, share/po/help_xml2pm.pl, share/po/wa.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/hu.po,
-	share/po/it.po, share/po/af.po: updated pot file
-
-	* help.pm: new version with [ and ]
-
-	* lang.pm: commented out utf-8 russian locale, for now
-
-2001/09/12  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/lsnetdrake: fix typo
-	added wonderful lsnetdrake
-
-	* modules.pm, install2.pm: display error when the kernel mismatch the
-	modules
-
-	* docs/README: explain how to get the boot kernels
-
-	* install_steps_gtk.pm (choosePackagesTree): translate the categories
-
-	* standalone/drakbug_report: cleanup
-
-	* bootloader.pm (suggest): no "quiet" boot for smp and enterprise kernels
-	(suggest): no "quiet" boot for smp and enterprise kernels
-	allow grub even for more than 800MB
-
-	* Makefile.drakxtools, Makefile.config: added wonderful lsnetdrake
-
-2001/09/12  siegel
-
-	* share/po/de.po: new & shiny verion
-
-	* share/po/help_xml2pm.pl: fixed silly error
-	added keycap patch
-
-2001/09/12  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: corrected shadow handling
-	no shadow if liveupdate
-	table undef corrected
-	removed shadows if standalone
-
-	* standalone/drakgw, standalone/draknet: corrected wizard mode in newt
-	mode
-
-	* mouse.pm: removed debug code
-
-	* network/netconnect.pm: corrected splash in non X mode
-
-2001/09/12  daouda
-
-	* standalone/drakbug_report: add Mandrake release section
-
-2001/09/12  François Pons  <fpons@mandrakesoft.com>
-
-	* live_install2: fix when switching perl version.
-
-	* live_install: use system perl instead.
-
-2001/09/12  kjx
-
-	* share/po/zh_CN.po: revison
-
-2001/09/12  Pixel  <pixel@mandrakesoft.com>
-
-	* docs/README: explain how to get the boot kernels
-
-	* install_steps_gtk.pm (choosePackagesTree): translate the categories
-
-	* standalone/drakbug_report: cleanup
-
-	* bootloader.pm: allow grub even for more than 800MB
-
-2001/09/11  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: removed useless print
-	don't detect ethx if no autodetection.
-	implement smarter checkboxes
-
-	* mouse.pm: test updated
-	mouse test worked
-
-	* network/ethernet.pm: don't detect ethx if no autodetection.
-	implement smarter checkboxes
-
-	* pixmaps/arrow_down.xpm: pixmap corrected
-	new arrows
-
-	* pixmaps/arrow_up.xpm: new arrows
-
-	* share/rpmsrate: added ibod
-	added isdn-light
-
-	* interactive_gtk.pm, my_gtk.pm: fear the shaped windows...
-
-2001/09/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: small fix
-
-	* share/po/fr.po, share/po/de.po, share/po/DrakX.pot, share/po/hu.po,
-	share/po/it.po: updated Hungarian file;
-	updated pot file
-
-2001/09/11  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile (tar-drakxtools): remove the building of "help" for drakxtools
-
-	* bootloader.pm: for lilo, do not have table=/dev/xxx if the device is not
-	a primary
-	partition (otherwise lilo dies)
-
-2001/09/10  dam's  <damien@mandrakesoft.com>
-
-	* network/modem.pm, network/ethernet.pm: detect_devices
-
-	* standalone/net_monitor, network/network.pm: removed timeout:1 in
-	resolv.conf, modified timeout scanning in draknet/net_monitor
-
-	* install_gtk.pm, install_steps_gtk.pm: mouse test moved
-
-	* mouse.pm: test_mouse moved
-
-	* my_gtk.pm: added border
-	window decorations
-	no set_events if embedded
-
-	* standalone/draknet: removed timeout:1 in resolv.conf, modified timeout
-	scanning in draknet/net_monitor
-	debug
-
-	* standalone/mousedrake: don't fork the code
-
-	* network/adsl.pm: debug
-	debug
-
-2001/09/10  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: updated g_auto_install() for newer printerdrake
-	interface.
-
-	* modules.pm, detect_devices.pm: moved modules::get_pcmcia_devices into
-	detect_devices::pcmcia_probe.
-
-	* mdk-stage1/init-data/msgboot-blank.img.bz2: initial release for
-	blank.img floppy image.
-
-	* install_steps_interactive.pm, mouse.pm: added hid type usb mouse
-	support.
-
-	* Xconfigurator_consts.pm: added some more ModeLine (1024x768 @ 97.6 Hz,
-	1024x480 but not automatically used).
-
-2001/09/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: plop
-	some adjustements in Games section
-
-2001/09/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/de.po: updated German file; added choice of
-	various quotes in help_xml2pm.pl
-	Updated pot file;
-	removed translations that are too low on percentage.
-
-	* share/po/zh_TW.po: updated Chinese file
-
-	* share/po/ko.po: updated Korean file
-	Updated pot file;
-	removed translations that are too low on percentage.
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated pot file;
-	removed translations that are too low on percentage.
-
-	* share/po/help_xml2pm.pl: updated German file; added choice of various
-	quotes in help_xml2pm.pl
-
-2001/09/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm, my_gtk.pm: 
-	  - make diskdrake work in embedded mode
-	  - $my_gtk::pop_it used where it should
-
-	* detect_devices.pm: fix ide-scsi appearing 2 times when standalone
-	because both in /proc/ide
-	and /proc/scsi/scsi
-
-	* share/po/help_xml2pm.pl: s/my/our/ for $i18ned_... vars
-	  - skip directories missing drakx-help.xml
-	  - convert to the right charset (taken from $lang.po)
-	  - rename help-*.po by help-*.pot
-	  - fix typo in script removing $lang.po translations to favour
-	help-*.pot
-
-	* diskdrake.pm: 
-	  - make diskdrake work in embedded mode
-	  - $my_gtk::pop_it used where it should
-	fix Umount and Mount when i18ned for nfs/smb
-	don't display Wizard if wizard done before DrakX
-
-	* share/po/Makefile, share/po/.cvsignore: 
-	  - rename help-*.po by help-*.pot
-	  - fix typo in script removing $lang.po translations to favour
-	help-*.pot
-
-2001/09/10  siegel
-
-	* share/po/de.po: updates
-
-2001/09/10  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Copying of PPD file when moving a CUPS (non-Foomatic) queue
-	modified to not get
-	interactive when overwriting a file.
-	Comment put into non-Foomatic CUPS PPD files in /etc/cups/ppd/ to be
-	able to
-	  identify which PPD from /usr/share/cups/model was used (for
-	auto-install).
-
-2001/09/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated pot file;
-	removed translations that are too low on percentage.
-
-2001/09/10  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile, share/po/.cvsignore, share/po/help_xml2pm.pl: 
-	  - rename help-*.po by help-*.pot
-	  - fix typo in script removing $lang.po translations to favour
-	help-*.pot
-
-2001/09/09  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: probeall handling
-
-2001/09/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: getAndSaveInstallFloppy: fix multiple cdrom issue
-
-2001/09/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-	* share/po/sv.po: updated Swedish file
-
-2001/09/09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (ejectCdrom): fix D state on exit
-
-	* diskdrake_interactive.pm, install_interactive.pm, diskdrake.pm: 
-	  - "Wizard" and "More" are back
-	  - allow "Use for loopback" when there is already a loopback
-	  - set the options on newly created partitions
-	  - recompute_loopbacks called after modification of loopbacks, no more
-	before reading
-	  - restrict the lenght of the lines in partition description
-	  - make loopback work
-
-	* interactive_gtk.pm, interactive.pm, any.pm, interactive_newt.pm:
-	clicked_may_quit used in place of clicked+exception to work-around
-	perl-GTK bug (?)
-
-	* share/po/i18n_compssUsers: ensure we're not adding a string already
-	there (otherwise msgmerge yells)
-
-	* share/po/help_xml2pm.pl, share/po/.cvsignore: xml help
-	handling/enhancing for multi-langs
-
-	* modules.pm: probeall handling
-	(write_conf): switch to "probeall scsi_hostadapter ..."
-
-	* share/po/Makefile: xml help handling/enhancing for multi-langs
-	xml help handling/enhancing for multi-langs
-
-	* partition_table.pm (get_normal_parts_and_holes): remove only small
-	holes, not small partitions
-
-	* fs.pm (set_default_options): remove iocharset=... for nfs (why was it
-	there?)
-
-2001/09/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix some ortograf
-
-	* share/rpmsrate: lvm not installed for everyone ?!
-
-2001/09/08  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm: force exitInstall to be non automatic
-
-	* install_steps.pm, fs.pm, install_steps_interactive.pm, fsedit.pm,
-	diskdrake_interactive.pm, install2.pm, diskdrake.pm: make loopback
-	installs work again
-
-2001/09/09  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (write_conf): switch to "probeall scsi_hostadapter ..."
-
-2001/09/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix some ortograf
-
-	* share/rpmsrate: lvm not installed for everyone ?!
-
-	* modules.pm: fix write_conf regarding /etc/modules so that (1) it doesn't
-	flush it when
-	it didn't decide to put any modules in it (to leave user's modules) (2)
-	it
-	doesn't remove the last line (3) it uses stronger regexp'es for
-	substitution to not remove modules that have names made of other modules
-	names subsets
-
-2001/09/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/zh_TW.po: updated Chinese file
-
-2001/09/08  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm: fix font in iso-15
-
-	* modules.pm (write_conf): put "probeall scsi-hosts scsi_hostadapter ..."
-
-	* interactive.pm: ugly workaround perl bug ([ID 20010908.008] memory leak
-	with nested subs)
-
-	* share/diskdrake.rc: change name
-
-	* install_steps_auto_install.pm: force exitInstall to be non automatic
-
-	* install_steps.pm, fs.pm, install_steps_interactive.pm, fsedit.pm,
-	diskdrake_interactive.pm, install2.pm, diskdrake.pm: make loopback
-	installs work again
-
-	* timezone.pm: Asia/Taipei for Traditional Chinese
-
-	* detect_devices.pm: remove debug code
-
-2001/09/07  daouda
-
-	* share/rpmsrate: add mdkonline (X 4)
-
-2001/09/07  fcrozat
-
-	* share/rpmsrate: Add grio500
-
-2001/09/07  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix card managed only by XF4 (may have some wrong
-	result).
-	fix all Matrox card used with XF4 which really does not like X in frame
-	buffer
-	(unable to restore frame buffer of DrakX).
-
-2001/09/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/tree/etc/oem, rescue/guessmounts, rescue/list.i386,
-	rescue/tree/etc/rc.sysinit: ext3, xfs, jfs
-
-	* bootloader.pm: use -v for mkinitrd
-
-	* share/po/fr.po: "reseaux" and plurals
-	misc
-
-	* share/rpmsrate: some work on games
-
-2001/09/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po, share/po/vi.po: updated Vietnamese and Japanese files
-
-2001/09/07  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: cleanup po
-
-	* install_steps.pm: s|kdmrc|kdm/kdmrc|
-
-	* lang.pm: fix load_mo call
-
-	* share/po/help_xml2pm.pl, share/po/Makefile, help.pm: new help
-
-	* diskdrake_interactive.pm: disable_forced_fsck called for ext3 formatting
-	disable_forced_fsck called for ext3 formatting
-	(Type): disable fsck when migrated ext2->ext3
-
-	* fs.pm: disable_forced_fsck called for ext3 formatting
-
-2001/09/07  siegel
-
-	* share/po/de.po: updates
-
-2001/09/07  Till Kamppeter <till@mandrakesoft.com>
-
-	* standalone/printerdrake, printer.pm, printerdrake.pm: Data structure
-	fitted for auto-install to work
-	Optimized program to be much faster
-	Many more waiting messages
-	Many bugfixes
-
-2001/09/07  daouda
-
-	* share/rpmsrate: add mdkonline (X 4)
-
-2001/09/07  fcrozat
-
-	* share/rpmsrate: Add grio500
-
-2001/09/07  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix card managed only by XF4 (may have some wrong
-	result).
-	fix all Matrox card used with XF4 which really does not like X in frame
-	buffer
-	(unable to restore frame buffer of DrakX).
-
-2001/09/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* any.pm: Changed simple quote to double quote for a translatable string
-	(otherwise
-	it isn't seen)
-
-	* share/po/es.po: updated Spanish file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/is.po, share/po/hu.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po,
-	share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po,
-	share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
-	updated pot file
-
-	* share/po/sv.po: updated Swedish file
-	updated pot file
-
-2001/09/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: s|kdmrc|kdm/kdmrc|
-	remove the "konsole and gnome-terminal are lamers in exotic languages,
-	link them to something better"
-
-	* bootloader.pm (write_lilo_conf): fix typo
-
-	* share/po/help_xml2pm.pl, share/po/Makefile, help.pm: new help
-
-	* diskdrake_interactive.pm: disable_forced_fsck called for ext3 formatting
-	disable_forced_fsck called for ext3 formatting
-	(Type): disable fsck when migrated ext2->ext3
-
-	* install_any.pm, keyboard.pm: cleanup
-
-	* partition_table.pm, share/list: add xfs
-
-	* fs.pm: disable_forced_fsck called for ext3 formatting
-
-	* share/rpmsrate: add jfsprogs
-
-2001/09/07  siegel
-
-	* share/po/de.po: updates
-	updates/fixes
-
-2001/09/06  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/tools.pm: corrected speedtouch
-
-	* install_gtk.pm: removed comments
-
-2001/09/06  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: cleanup for bad card and prefer XF3, so now using
-	XFree 4.1.0 is not bad, and
-	all NVIDIA card are no more considered bad.
-
-	* pkgs.pm: fixed retry of package 3 times everytime even if first install
-	succeeded, now
-	after first successfull install, go to next package to install.
-
-	* install_steps.pm: removed some cards for allowing frame buffer.
-
-2001/09/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: works now ;p
-
-2001/09/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: 'zh' in LANGUAGE for Chinese is needed by DrakX
-	corrected lang.pm to have coherence in locale usage (it was the source
-	of much of the problems); changed keyboard.pm to ignore charset encoding
-	in locale name for locale -> keyboard guessing.
-	removed unused gconv modules, converted az.po to utf-8 (as it was the
-	only
-	remaining az.po on Earth still in a non standard encoding)
-
-	* share/list, share/gen_locales.sh, share/locales-skeleton.tar.bz2,
-	keyboard.pm, share/po/az.po: corrected lang.pm to have coherence in
-	locale usage (it was the source
-	of much of the problems); changed keyboard.pm to ignore charset encoding
-	in locale name for locale -> keyboard guessing.
-	removed unused gconv modules, converted az.po to utf-8 (as it was the
-	only
-	remaining az.po on Earth still in a non standard encoding)
-
-2001/09/06  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: fix keyboard config + some cleanup
-	cleanup (use /proc/self instead of /proc/$$)
-
-	* install_steps.pm, install_steps_interactive.pm, keyboard.pm: fix
-	keyboard config + some cleanup
-
-2001/09/06  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/tools.pm: corrected speedtouch
-
-	* install_gtk.pm: removed comments
-
-2001/09/06  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: cleanup for bad card and prefer XF3, so now using
-	XFree 4.1.0 is not bad, and
-	all NVIDIA card are no more considered bad.
-	avoid using @resolutions_laptop, now use only @resolutions, this means
-	1400x1050
-	is available to other, use XFree86 4.1.0 builtin timings for 1400x1050
-	(so
-	1400x1050 is no more printed as modeline for XFree 4.1.0 configuration
-	file).
-
-	* install_steps.pm: removed some cards for allowing frame buffer.
-	fix log when configuring printer queue.
-
-	* Xconfigurator_consts.pm: added 1400, 1920 and 2048 for %min_hsync4wres.
-	cleaned up a bit and using XFree86 4.1.0 builtin timings for 1400x1050
-	and
-	1920x1440, 2048x1536 has no modeline (but its min hsync is really high).
-
-	* pkgs.pm: fixed retry of package 3 times everytime even if first install
-	succeeded, now
-	after first successfull install, go to next package to install.
-
-	* install_any.pm: update printer data for g_auto_install.
-
-2001/09/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: works now ;p
-
-2001/09/06  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: fix keyboard config + some cleanup
-	cleanup (use /proc/self instead of /proc/$$)
-
-	* install_steps.pm, install_steps_interactive.pm, keyboard.pm: fix
-	keyboard config + some cleanup
-
-	* fs.pm (merge_fstabs): correction allowing manual_fstab to not give the
-	type
-
-2001/09/06  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/tools.pm: corrected speedtouch
-
-	* install_gtk.pm: removed comments
-	new mouse test
-
-2001/09/06  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: revert previous patch, this is not usable with current rpm as
-	it complains if
-	one the file has a modified MD5SUM against the header describing it in
-	the
-	hdlist, so this is most of the time useless.
-	guess filename if the file is not found (for an rpm file during
-	installation),
-	so try with release incremented in such case (good for Cooker user or
-	local
-	tester using network installation).
-
-	* install_steps.pm: fix log when configuring printer queue.
-
-	* Xconfigurator.pm: avoid using @resolutions_laptop, now use only
-	@resolutions, this means 1400x1050
-	is available to other, use XFree86 4.1.0 builtin timings for 1400x1050
-	(so
-	1400x1050 is no more printed as modeline for XFree 4.1.0 configuration
-	file).
-
-	* Xconfigurator_consts.pm: added 1400, 1920 and 2048 for %min_hsync4wres.
-	cleaned up a bit and using XFree86 4.1.0 builtin timings for 1400x1050
-	and
-	1920x1440, 2048x1536 has no modeline (but its min hsync is really high).
-
-	* install_any.pm: update printer data for g_auto_install.
-
-	* printerdrake.pm: revert previous commit.
-	added a missing ifup lo, on some case (auto_install) it fails.
-
-	* printer.pm: start ifup lo before starting service cups.
-
-2001/09/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-	* share/po/ga.po, share/po/no.po: updated Irish and Norwegian files
-
-2001/09/06  Pixel  <pixel@mandrakesoft.com>
-
-	* share/diskdrake.rc, fsedit.pm, diskdrake.pm: add journalised in legend,
-	fix the use
-
-	* diskdrake_interactive.pm (Add2LVM): do not allow spaces in lvm names
-
-	* fs.pm (merge_fstabs): correction allowing manual_fstab to not give the
-	type
-
-	* timezone.pm (ntp_server): fix (step-tickers was empty)
-
-2001/09/05  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor, standalone/draknet: corrected opeions
-
-	* standalone/mousedrake: typo
-	updated
-
-	* network/tools.pm: corrected initcript
-
-	* pixmaps/mouse_middle.xpm, pixmaps/mouse_right.xpm,
-	pixmaps/mouse_left.xpm: new pixmaps
-
-2001/09/05  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/diskdrake: fix function called
-
-2001/09/05  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Set default printer (all spoolers), manual
-	config (CUPS), bugfixes, clean-ups.
-
-2001/09/05  dam's  <damien@mandrakesoft.com>
-
-	* pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png,
-	pixmaps/wiz_drakgw.png: new icons
-
-	* share/themes-mdk.rc: updated theme
-
-	* standalone/draknet: interface display corrected
-
-	* share/themes/mdk-button4.png, share/themes/mdk-button1.png: new buttons
-
-	* install_gtk.pm: 2 sec without sensitives buttons
-
-	* network/netconnect.pm: only if standalone
-
-	* pixmaps/network.png, pixmaps/bootloader.png, pixmaps/printer.png,
-	pixmaps/security.png, pixmaps/rootpasswd.png, pixmaps/harddrive.png,
-	pixmaps/keyboard.png, pixmaps/X.png, pixmaps/mouse.png,
-	pixmaps/bootdisk.png: new pixmaps
-
-2001/09/05  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed display of XFdrake test image (fcrozat).
-
-	* install_steps.pm: fixed typo preventing removable devices to be seen in
-	/etc/fstab.
-	fixed configurePrinter (used for auto_install).
-
-	* install_steps_interactive.pm: avoid asking when using existing partition
-	for magic partition with a real
-	mntpoint (typically /tmp/hdimage) if we are not using a ramdisk (so
-	partition is
-	not unmountable).
-
-	* bootloader.pm: removed yvounet sucking, handle Mandrake lilo or unknown
-	lilo.
-
-	* fs.pm: fix bad creation of /mnt/hd for an hd installation without
-	ramdisk.
-	support setting /tmp/hdimage in /etc/fstab even if memory is low (not
-	using ramdisk).
-
-	* install_any.pm: filtering $o->{printer} for g_auto_install().
-	allow installing urpmi on hd install even if low memory (so not using
-	ramdisk).
-
-	* diskdrake_interactive.pm: Do not use for loopback of magic partition
-	(/tmp/hdimage).
-
-2001/09/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/i386/busybox: hopefully fix the _ problems with busybox 0.60.1
-
-2001/09/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bs.po: updated Bosnian file
-
-	* share/po/uk.po: updated Ukrainian file
-
-2001/09/05  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: use EISA_ID in more cases to have the name
-	non-case dependent EISA comparison
-	also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
-	there, but not the [hv]syncrange
-
-	* Xconfig.pm: fix typos
-	non-case dependent EISA comparison
-	also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
-	there, but not the [hv]syncrange
-
-	* modules.pm: favor tmscsim over AM53C974
-
-	* tools/ddcprobe/ddcxinfos.c: fix for cards giving bad info
-	also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
-	there, but not the [hv]syncrange
-
-	* standalone/diskdrake: fix function called
-
-2001/09/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/mount.c: reflect scd -> sr here too, /me sucks :-(
-
-2001/09/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/cy.po, share/po/nl.po, share/po/wa.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/eo.po, share/po/bs.po, share/po/ro.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
-	Updated Danish file; updated pot file
-
-2001/09/04  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix typo
-
-2001/09/04  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Fitted to the new Foomatic version.
-	Fixed bug of spooler change only working when language is English.
-
-2001/09/04  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fix bad vga= which go for some install.
-
-2001/09/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* network/netconnect.pm: small english change
-
-	* mdk-stage1/probing.c: Compaq mescouilles has changed proc stuff
-
-	* share/rpmsrate: tetex-doc
-
-	* mdk-stage1/mount.c: reflect scd -> sr here too, /me sucks :-(
-
-2001/09/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/cy.po, share/po/nl.po, share/po/wa.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
-	Updated Danish file; updated pot file
-
-	* share/po/ja.po: updated Japanese file
-
-2001/09/04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (add_alias): use "above" instead of "post-install"
-
-	* partition_table.pm: re-add JFS
-
-	* fsedit.pm, common.pm, bootloader.pm: 
-	  - don't expand symlinks in grub's menu.lst
-	  - better use of /proc/partitions verification
-
-	* detect_devices.pm (getCompaqSmartArray): add yet another location for
-	cpqarray location
-
-	* fs.pm: fix typo
-	mount ext3 as ext2 during install for speed up
-
-2001/09/04  fcrozat
-
-	* share/rpmsrate: Add plugins for KDE and Mozilla
-
-2001/09/04  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fix bad vga= which go for some install.
-
-	* pkgs.pm: cleanup to avoid invalid file error.
-
-2001/09/04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (add_alias): use "above" instead of "post-install"
-
-	* fs.pm: mount ext3 as ext2 during install for speed up
-
-	* partition_table.pm: re-add JFS
-
-	* fsedit.pm, common.pm, bootloader.pm: 
-	  - don't expand symlinks in grub's menu.lst
-	  - better use of /proc/partitions verification
-
-	* detect_devices.pm (getCompaqSmartArray): add yet another location for
-	cpqarray location
-
-2001/09/04  yduret
-
-	* my_gtk.pm: emebedded mode fix
-
-	* interactive_gtk.pm, diskdrake.pm: embedded mode fix
-
-2001/09/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: unfuzzy-ise a few things, translate a few things
-
-2001/09/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po: updated Korean file
-
-2001/09/03  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix for lvm (non-)creation of devices
-
-2001/09/03  yduret
-
-	* my_gtk.pm, diskdrake.pm: fix Embedded mode
-
-2001/09/03  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: added timeout in resolv.conf
-
-2001/09/03  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: updated to use new urpmi.cfg format for install_urpmi,
-	make sure the directory
-	is not given for ftp and http install ($dir).
-
-	* Xconfigurator_consts.pm: added 1920x1440 and 2048x1536.
-
-	* Xconfig.pm: make sure a staling Mouse2 is not present unless it really
-	physically exists.
-
-2001/09/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: add axnet_cs to pcmcia category
-
-	* mdk-stage1/probing.c: change `scd' with `sr'
-
-2001/09/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/es.po: updated Spanish file
-
-	* share/po/ko.po: updated Korean file
-
-2001/09/03  Pixel  <pixel@mandrakesoft.com>
-
-	* timezone.pm (ntp_server): also set /etc/ntp/step-tickers
-
-	* fsedit.pm, devices.pm: fix mtab reading and pseudo-device use
-
-	* interactive_gtk.pm: better sizing for combo boxes
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): do not propose
-	to propose already formatted
-	fat partitions
-
-	* share/list: those files disappeared ??
-
-	* fs.pm: fix for lvm (non-)creation of devices
-	(set_default_options): created
-	fix mtab reading and pseudo-device use
-
-	* diskdrake.pm (smb_create, nfs_create): make the "New" button work
-	(raw_hd_mount_point): fix checking the same mount point
-	(try_): fix error displaying
-
-	* partition_table.pm: fix switching to 0x85 extended when
-	remove_empty_extended is called
-
-2001/09/03  yduret
-
-	* standalone/net_monitor: sync with new logdrake command line options
-
-2001/09/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bs.po: updated bosnian file
-	Added Bosnian file
-
-2001/09/01  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: avoid deleting package from %packages in install() when closing
-	fd associated,
-	if the open is called again (?), it will cause an invalid file (seems to
-	happens
-	on some invalid file).
-
-2001/08/31  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draksec: corrected yesno interpretation
-	libsafe modification
-
-	* network/netconnect.pm: corrected profil recording for modem
-
-	* standalone/net_monitor: correted typo
-
-	* network/ethernet.pm: corrected zero return when cable configuring
-
-	* any.pm: corrected autologin : no uc anymore
-
-	* network/modem.pm: added domainname2 setting
-
-	* share/logo-mandrake.png: new logo
-
-2001/08/31  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added missing AlwaysCore line for second mouse for
-	XF3.
-
-	* mouse.pm: added missing AlwaysCore line for second mouse in XF3.
-
-	* standalone.pm: add option --allow-medium-change to force asking question
-	even if --auto is
-	given on command line of urpmi, for installing package so that a dialog
-	appears.
-
-2001/08/31  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: mures is a fine game, have it at weight "4" under GAMES
-	section
-	have "numlock" in INSTALL because it's the only package which goes to
-	CD#2
-	when you unselect all groups, so having it here will allow not changing
-	CD
-	with this kind of small install
-
-2001/08/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/uk.po, share/po/es.po: updated Ukrainian
-	and Spanish files
-
-	* share/po/sv.po: updated Swedish file
-	updated Ukrainian and Spanish files
-
-2001/08/31  siegel
-
-	* share/help_sav.png: not used any more
-
-	* share/po/de.po: updates
-
-	* share/logo-mandrake2.png, share/logo-mandrake_trans.png,
-	share/logo-mandrake_sav.png, share/logo-mandrake-Desktop.png: old
-	versions => not in use any more
-
-2001/08/31  yduret
-
-	* bootlook.pm: updated code
-
-2001/08/30  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm: nicer display
-
-	* standalone/draknet: added use common.pm (can be usefull, eh?)
-
-	* network/network.pm: silently /sbin/ip
-	track_network_id only if laptop
-
-2001/08/30  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: Updated Danishfile
-	updated pot file (I had lost the group descriptions, sorry, they are
-	back now)
-	moved chinese files to charset independent names
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file (I
-	had lost the group descriptions, sorry, they are back now)
-	moved chinese files to charset independent names
-
-2001/08/30  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (read): it works now
-
-	* help.pm: fixed (was utf8)
-
-	* install_steps_gtk.pm (new): call interactive_gtk::new
-
-	* install_steps.pm, Xconfigurator.pm: disable gpm (in case of serial
-	mouse) before service choice
-
-	* pkgs.pm (naughtyServers): update for 8.1
-
-2001/08/30  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm: corrected icon display
-
-	* my_gtk.pm: new wizard
-
-	* interactive_gtk.pm: corrected wizard mode display height/width
-
-	* standalone/draknet: added draknet client installation
-
-	* network/network.pm: track_network_id only if laptop
-	dhcp package installation
-
-	* pixmaps/wiz_default_left.png: new logo
-
-2001/08/30  François Pons  <fpons@mandrakesoft.com>
-
-	* mouse.pm: make sure to update all symlink according to any mouse (max 2)
-	probed.
-	fix previous fixes on mouse::write_conf
-
-	* standalone/mousedrake: fix previous fix (typo).
-	keep mouse specific paramater if user does not change its mouse.
-	make sure --auto is not interactive on some part.
-	use default value for port device if a serial mouse.
-
-	* printer.pm: fixed foomatic failed (no lo up since ifup lo don't run)
-
-	* Makefile: ugly to make sure standalone/pixmaps is not here when building
-	tar-drakxtools.
-
-	* Xconfig.pm: when reading existing configuration for mouse, update
-	type|name for second mouse too.
-	make sure default to set 3 for nbuttons for getinfoFromXF86Config for
-	second
-	mouse if this mouse has 3 buttons.
-
-	* Xconfigurator.pm: for single heads mode, no screen id should be set in
-	file (or XFree is going
-	mad, but he is right, no ?)
-
-	* install_any.pm: if a medium is refused, get rid of it definitively until
-	it is accepted again.
-
-2001/08/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps_interactive.pm: have a wait_message during installation of
-	bootloader
-
-	* mdk-stage1/pcmcia/pcmcia_probe.c: import new PCI ID's for more PCMCIA
-	Controllers, from probe.c-1.54 of pcmcia-cs-3.1.28
-
-2001/08/30  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po, share/po/vi.po, share/po/es.po: updated Japanese,
-	Spanish and Vietnamese files
-
-2001/08/30  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: allow LVM on RAID
-
-	* help.pm: fixed (was utf8)
-
-	* any.pm: cleanup
-
-	* pkgs.pm (naughtyServers): update for 8.1
-
-	* lang.pm (read): it works now
-
-	* fs.pm (set_default_options): "ro" for cdroms, "user" for vfat only if
-	removable
-	media
-
-	* share/po/Makefile: fix utf8 translation of xml file
-
-	* interactive_gtk.pm: fix&cleanup window size
-
-	* tools/Makefile: cleanup unneeded stuff
-
-2001/08/30  siegel
-
-	* share/po/de.po: new german version
-
-2001/08/30  warly
-
-	* share/rpmsrate: add koffice-i18n diald vlan-utils
-
-2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw, standalone/drakautoinst: quit_global
-
-	* share/po/fr.po: minor fix
-
-2001/08/29  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix language selection
-
-	* c.pm: better error message when function c::foo() is missing
-
-	* rescue/dirs, rescue/make_rescue_img: make it work (do not have the dev
-	in /)
-
-2001/08/29  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed if undef encountered in depslist when installing package
-	(traversing
-	depslist as $depOrder).
-
-2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw, standalone/drakautoinst: quit_global
-
-	* share/po/fr.po: minor fix
-
-2001/08/29  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix language selection
-
-	* c.pm: better error message when function c::foo() is missing
-
-	* install_steps_gtk.pm (installPackages): have Ok button by default for
-	asking for changing CD
-
-	* bootloader.pm (mkbootdisk): cleanup
-
-	* rescue/dirs, rescue/make_rescue_img: make it work (do not have the dev
-	in /)
-
-	* devices.pm: remove fd0H1440 and fd1H1440
-
-	* modules.pm: remove "msdos"
-
-2001/08/29  François Pons  <fpons@mandrakesoft.com>
-
-	* mouse.pm: improved write_conf to enable multi-mice if only once mice is
-	already defined.
-
-	* standalone/mousedrake: try to merge already existing mouse configuration
-	with what has been probed,
-	change if mouse is really changed as probe is incomplete.
-
-	* Xconfig.pm: improve getinfoFromXF86Config for mouse parameters.
-
-	* pkgs.pm: fixed if undef encountered in depslist when installing package
-	(traversing
-	depslist as $depOrder).
-
-2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw, standalone/drakautoinst: quit_global
-
-	* share/po/fr.po: minor fix
-
-2001/08/29  Pixel  <pixel@mandrakesoft.com>
-
-	* c.pm: better error message when function c::foo() is missing
-
-	* keyboard.pm (loadkeys_files): fixed
-
-	* install_steps_interactive.pm, standalone/localedrake, lang.pm, any.pm,
-	Makefile.config: add localedrake (not tested)
-
-	* rescue/make_rescue_img: make it work (do not have the dev in /)
-	cleanup, speedup, use mknod for devices
-
-	* install_steps_gtk.pm (installPackages): have Ok button by default for
-	asking for changing CD
-
-	* rescue/devices.pl, rescue/list: cleanup, speedup, use mknod for devices
-
-	* bootloader.pm (mkbootdisk): cleanup
-
-	* rescue/dirs: make it work (do not have the dev in /)
-
-	* devices.pm: remove fd0H1440 and fd1H1440
-
-	* modules.pm: remove "msdos"
-
-2001/08/29  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/tools.pm, share/rpmsrate: speedtouch
-	configuration
-
-2001/08/29  François Pons  <fpons@mandrakesoft.com>
-
-	* mouse.pm: improved write_conf to enable multi-mice if only once mice is
-	already defined.
-
-	* install_steps.pm: add support for mandatory frame buffer support (SiS
-	630) need them for XF3 to
-	work properly, XF4 does work with it nicely.
-
-	* Xconfigurator.pm: make sure Port entry for wacom is placed first.
-
-	* standalone/mousedrake: try to merge already existing mouse configuration
-	with what has been probed,
-	change if mouse is really changed as probe is incomplete.
-
-	* Xconfig.pm: improve getinfoFromXF86Config for mouse parameters.
-
-2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: games
-
-2001/08/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po, share/po/DrakX.pot, share/po/es.po: updated Danish file
-
-2001/08/29  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, install_any.pm, fsedit.pm, diskdrake.pm: try to better handle
-	symlinks device and devfs devices
-
-	* install_steps_interactive.pm, standalone/localedrake, lang.pm, any.pm,
-	Makefile.config: add localedrake (not tested)
-
-	* install_steps.pm: no need to have devfs=nomount anymore in root raid
-	do not modify fstab options in upgrade
-
-	* keyboard.pm (loadkeys_files): fixed
-	fix DISABLE_WINDOWS_KEY state handling (for upgrade), cleanup
-
-	* diskdrake_interactive.pm: try to better handle symlinks device and devfs
-	devices
-	(main): fix
-	(Create): fix typo causing primaryOrExtended to be ignored
-
-	* rescue/devices.pl, rescue/make_rescue_img, rescue/list: cleanup,
-	speedup, use mknod for devices
-
-	* c/stuff.xs.pm, detect_devices.pm: better floppy detection/info
-
-2001/08/28  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm, install2.pm: corrected icon handling
-
-	* services.pm: added cupslpd in printing section
-
-2001/08/28  François Pons  <fpons@mandrakesoft.com>
-
-	* Makefile.config: really fix typo...
-	fixed typo.
-
-2001/08/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po: updated Czech file
-
-2001/08/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: remove the temporary file /tmp/autoinst.img
-
-	* install_steps.pm, install_steps_interactive.pm: propose to format / and
-	/usr even if isFormatted. More generally do not trust isFormatted to
-	show which partitions to format
-
-2001/08/28  siegel
-
-	* ChangeLog, keyboard.pm: 
-	  - keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard
-	if no laptop is detected (= give users the chance to know about the
-	existence of this variable).
-
-2001/08/28  yduret
-
-	* standalone/diskdrake: embedded mode nicer
-
-2001/08/28  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm, install2.pm: corrected icon handling
-
-2001/08/28  François Pons  <fpons@mandrakesoft.com>
-
-	* share/list: added /sbin/e2fsck
-
-	* share/aliases: added fsck.ext2 -> e2fsck (now in list file)
-	removed e2fsck.shared as e2fsprogs now provide a shared version instead
-	of a
-	static one.
-
-	* Makefile.config: really fix typo...
-	fixed typo.
-	removed reference to e2fsck.shared (now use e2fsck from package which is
-	shared
-	since 1.23-2mdk).
-
-2001/08/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: remove the temporary file /tmp/autoinst.img
-
-2001/08/28  siegel
-
-	* ChangeLog, keyboard.pm: 
-	  - keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard
-	if no laptop is detected (= give users the chance to know about the
-	existence of this variable).
-
-2001/08/28  yduret
-
-	* standalone/diskdrake: embedded mode nicer
-
-2001/08/28  Stefan Siegel  <siegel@mandrakesoft.com>
-
-	* keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard 
-	if no laptop is detected (= give users the chance to know about
-	the existence of this variable).
-
-2001/08/28  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: typo
-
-2001/08/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: default the licence agreement to "Refuse"
-
-	* standalone/drakboot: security fix and various
-	move to all_hds stuff
-
-	* c/stuff.xs.pm, bootloader.pm: security fix and various
-
-2001/08/28  warly
-
-	* share/rpmsrate: move libsafe to SERVER_OTHER 2
-	added prelude, libsafe...
-
-2001/08/28  yduret
-
-	* standalone/drakxconf: readded dsikdrake
-	added new items, remove some old ones
-
-2001/08/27  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: corrected hwaddr setting and draknet first window
-	display
-	corrected typo
-
-	* network/netconnect.pm: corrected hwaddr setting and draknet first window
-	display
-
-2001/08/27  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: corrected hwaddr setting and draknet first window
-	display
-	corrected typo
-
-	* network/netconnect.pm: corrected hwaddr setting and draknet first window
-	display
-
-2001/08/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sk.po, share/po/eu.po: updated Basque and slovak files
-
-2001/08/27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: nicer help display
-
-	* share/keyboards.tar.bz2: fix the rights
-
-	* c/stuff.xs.pm (setlocale): do not set LC_NUMERIC
-
-2001/08/27  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: corrected bad window size
-
-	* network/network.pm: make it compile
-	corrected hwaddr stuff
-	added HWADDR
-
-	* network/tools.pm: corrected internet initscript
-
-	* any.pm, mouse.pm: make it compile
-	add_devfslink
-
-2001/08/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, keyboard.pm: Added "zh_HK" to Chinese in LANGUAGE list.
-	Added Latvian keyboard
-
-	* share/keyboards.tar.bz2: Checked and updated xmodmap files for DrakX
-
-	* share/po/sk.po, share/po/eu.po: updated Basque and slovak files
-
-2001/08/27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: nicer help display
-
-	* diskdrake.pm: use empty hash instead of the raid/loopback array
-
-	* c/stuff.xs.pm (setlocale): do not set LC_NUMERIC
-
-2001/08/27  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: corrected bad window size
-
-	* network/network.pm: added HWADDR
-
-	* network/tools.pm: corrected internet initscript
-
-2001/08/27  François Pons  <fpons@mandrakesoft.com>
-
-	* any.pm, standalone/draknet, network/modem.pm: added Borsenkow Andrej
-	patch to support CHAP again.
-
-2001/08/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, keyboard.pm: Added "zh_HK" to Chinese in LANGUAGE list.
-	Added Latvian keyboard
-
-2001/08/27  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: use empty hash instead of the raid/loopback array
-
-2001/08/26  warly
-
-	* share/rpmsrate: add some important packages
-
-2001/08/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakautoinst: require -> use
-
-	* install_any.pm: save the .img file so that multi-cd install won't ask to
-	re-enter first cd
-
-2001/08/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/08/26  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile, share/po/.cvsignore: fetch directly the latest
-	drakx-help.xml
-
-2001/08/25  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakbug_report: add "rpm -qa"
-
-	* bootlook.pm: fix deprecated call standalone::pkgs_install
-
-	* diskdrake.pm: don't the grab flag propagate everywhere
-
-2001/08/25  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm, steps.pm: icon correction
-
-2001/08/25  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (mount): accept mounting iso9660 filesystem as it should be
-	(write_fstab): enable mounting more than one swap :)
-
-	* bootlook.pm: fix deprecated call standalone::pkgs_install
-
-	* install_steps.pm: added the missing security parameter to
-	set_default_options
-
-	* diskdrake.pm: don't the grab flag propagate everywhere
-
-2001/08/24  dam's  <damien@mandrakesoft.com>
-
-	* pixmaps/mouse_3b_mini.xpm, pixmaps/mouse_3b+.xpm, pixmaps/mouse_3b.xpm,
-	pixmaps/mouse_3b+_mini.xpm: mini pixmaps, and lower color res for normal
-	pix
-
-	* standalone/mousedrake: updated mouse test
-
-2001/08/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/libstdio/fdglue.c: fix this dietlibc... hope the
-	uncompressing of ramdisk will rulz now
-
-	* mdk-stage1/network.c: allow unsetting of automatic mode if not enough
-	parameter provided in network steps
-
-	* mdk-stage1/probing.c: 
-	  - descr of proc files
-	  - fix small typo (segfault or not segfault? that's the question)
-	enable install from Compaq Smart Array
-
-	* mdk-stage1/dietlibc/Makefile, mdk-stage1/bzlib/Makefile: use CC rather
-	than gcc statically
-
-	* mdk-stage1/tools.c, mdk-stage1/mount.c: enable install from Compaq Smart
-	Array
-
-2001/08/24  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/pcmcia_config.patch: update the patch
-
-	* Makefile (test_pms): make perl_checker skip help.pm
-	ensure no .orig are generated when the pcmcia patch is applied
-
-	* tools/make_mdkinst_stage2: give a little more free space (esp. for
-	russian lang)
-
-	* lang.pm, share/gen_locales.sh: no need for UTF-8/LC_CTYPE
-
-	* share/po/help_xml2pm.pl, share/po/Makefile, help.pm: auto-generates
-	help.pm from xml doc done by doc team
-
-2001/08/24  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm: bugfix, speedtouch help
-
-	* standalone/mousedrake: updated mouse test
-
-2001/08/24  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fixed possible bug (not sorted partition when calling
-	mount_part).
-
-	* install_any.pm: fixed hdInstallPath for an hd installation without
-	usingRamdisk (not installing
-	urpmi in such case).
-	updated packages to copy for printerdrake, removed almost obsoletes
-	XFree86
-	3.3.6 servers (8514, AGX, Mach32, Mach8, Mono, P9000, W32, I128, VGA16,
-	3DLabs)
-	which means user will have to change CD back to CD#1 if he a such a
-	card.
-	removed obsolete code for cond_remount and cond_umount and update
-	hdInstallPath
-	for hd installation.
-
-	* diskdrake_interactive.pm: fixed typo common::usingRamdisk() instead of
-	common::useRamdisk().
-	take care mount point action is available for the hd installation
-	partition only
-	if a ramdisk is used (as it can be unmounted).
-	use more global isMagicPart instead of isInstallHdPart.
-	added real_mntpoint documentation and take care of hd install partition
-	for
-	available actions.
-
-	* fs.pm: take care of using ram disk to remap mntpoint of hd installation
-	partition.
-	fixed partition never seen as mounted, added special case for
-	real_mntpoint to
-	remount magic partition on the right place.
-
-2001/08/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/libstdio/fdglue.c: fix this dietlibc... hope the
-	uncompressing of ramdisk will rulz now
-
-	* mdk-stage1/automatic.c: revert my auto->interactive patch
-
-	* mdk-stage1/network.c: allow unsetting of automatic mode if not enough
-	parameter provided in network steps
-
-	* mdk-stage1/dietlibc/Makefile, mdk-stage1/bzlib/Makefile: use CC rather
-	than gcc statically
-
-	* mdk-stage1/tools.c, mdk-stage1/mount.c, mdk-stage1/probing.c: enable
-	install from Compaq Smart Array
-
-2001/08/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/locales-skeleton.tar.bz2, share/fonts.tar.bz2, keyboard.pm:
-	enabling euro and utf-8 for some languages; added unicode font
-
-2001/08/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: remove the cond_umount_hdimage and
-	cond_remount_hdimage
-
-	* tools/pcmcia_config.patch: update the patch
-
-	* lang.pm: no need for UTF-8/LC_CTYPE
-	(load_mo): if not usingRamdisk, don't try getFile
-
-	* diskdrake_interactive.pm: remove the cond_umount_hdimage and
-	cond_remount_hdimage
-	(Done): do not write fstab nor ask about it in install
-
-	* fs.pm (mount): allow to mount 'proc' and 'usbdevfs'
-
-	* Makefile: ensure no .orig are generated when the pcmcia patch is applied
-
-	* partition_table.pm (write): do not die when real_mntpoint fs fail to
-	unmount/remount, just log
-	(write): unmount+remount real_mntpoint before doing the kernel_read
-
-	* share/gen_locales.sh: no need for UTF-8/LC_CTYPE
-
-	* pkgs.pm: fix "invalid file"
-
-2001/08/24  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: speedtouch configuration
-
-	* my_gtk.pm: gtk_create_xpm handles no absolute xpm path
-
-	* pixmaps/mouse_3b+.xpm, pixmaps/mouse_middle.xpm, pixmaps/mouse_3b.xpm:
-	added new mouse pixmap for mousedrake
-
-	* network/adsl.pm: bugfix, speedtouch help
-	added aliases for speedtouch stuff
-	speedtouch configuration
-	removed adsl detectioin, once again.
-
-	* standalone/mousedrake: no absolute pixmap reference
-	new mousedrake. experimental
-
-	* network/tools.pm: speedtouch configuration
-	export write_initscript, correct initscript.
-
-2001/08/24  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fixed possible bug (not sorted partition when calling
-	mount_part).
-
-	* diskdrake_interactive.pm: take care mount point action is available for
-	the hd installation partition only
-	if a ramdisk is used (as it can be unmounted).
-	use more global isMagicPart instead of isInstallHdPart.
-	added real_mntpoint documentation and take care of hd install partition
-	for
-	available actions.
-
-	* install_any.pm: fixed hdInstallPath for an hd installation without
-	usingRamdisk (not installing
-	urpmi in such case).
-	updated packages to copy for printerdrake, removed almost obsoletes
-	XFree86
-	3.3.6 servers (8514, AGX, Mach32, Mach8, Mono, P9000, W32, I128, VGA16,
-	3DLabs)
-	which means user will have to change CD back to CD#1 if he a such a
-	card.
-	removed obsolete code for cond_remount and cond_umount and update
-	hdInstallPath
-	for hd installation.
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2,
-	mdk-stage1/init-data/msgboot.img.bz2: updated with latest 8.1 pictures
-	and updated documentation.
-
-	* fs.pm: take care of using ram disk to remap mntpoint of hd installation
-	partition.
-	fixed partition never seen as mounted, added special case for
-	real_mntpoint to
-	remount magic partition on the right place.
-
-2001/08/24  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (write): do not die when real_mntpoint fs fail to
-	unmount/remount, just log
-	(write): unmount+remount real_mntpoint before doing the kernel_read
-
-	* install_steps.pm: remove the cond_umount_hdimage and
-	cond_remount_hdimage
-
-	* diskdrake_interactive.pm: remove the cond_umount_hdimage and
-	cond_remount_hdimage
-	(Done): do not write fstab nor ask about it in install
-
-	* lang.pm (load_mo): if not usingRamdisk, don't try getFile
-
-	* fs.pm (mount): allow to mount 'proc' and 'usbdevfs'
-
-2001/08/24  siegel
-
-	* share/po/de.po: New & shiny german version
-
-2001/08/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-	* share/po/el.po: updated Greek file
-
-2001/08/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-2001/08/23  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: at_boot connection,resolvconf in profiles
-
-	* standalone/draksec: addedlibsafe option
-
-	* network/adsl.pm: restart network after having tested adsl. experimental
-
-2001/08/23  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: removed unusefull greping when building package
-	tree.
-
-2001/08/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: work on GAMES section
-
-2001/08/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/lv.po: updated Latvian file
-
-2001/08/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (cond_umount_hdimage): do not unmount /tmp/hdimage if not
-	using ramdisk
-	(disable_user_view): damned kdmrc moved
-
-	* diskdrake_interactive.pm: cancel at startup will now exit
-	ask wether to save fstab
-	(part_possible_actions): have "Mount point" first to please fpons
-
-	* fs.pm: keep the freq&passno of /etc/fstab
-
-	* tools/i386/netboot/menu.lst.example,
-	tools/i386/netboot/make_boot_network,
-	tools/i386/netboot/automatic.para.default: as we now have
-	menu.lst.example, i remove automatic.para for more flexibility
-
-	* lang.pm: fix locale support when usingRamdisk
-
-2001/08/22  anoncvs
-
-	* share/po/zh_CN.GB2312.po: * Wed Aug 22 2001 DU Xiaoming
-	<dxiaoming@mandrakesoft.com>
-	Updated chinese (simplied) translation.
-
-2001/08/22  Pixel  <pixel@mandrakesoft.com>
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: fix ru KOI8-R
-
-	* network/nfs.pm: pleac perl_checker
-
-	* interactive_gtk.pm: more intelligent setting back the selected value in
-	the clist and ctree
-	(done already for entry)
-	  - fix entries editing causing the cursor to go to the end of line
-	  - select the text
-
-	* c/stuff.xs.pm, install_steps.pm, pkgs.pm: do init_db inside pkg_inside
-	otherwise LOG is closed and rpmlib tries to write in it and ...
-
-2001/08/22  anoncvs
-
-	* share/po/zh_CN.GB2312.po: * Wed Aug 22 2001 DU Xiaoming
-	<dxiaoming@mandrakesoft.com>
-	Updated chinese (simplied) translation.
-
-2001/08/22  fabman
-
-	* share/po/es.po: updated spanish .po files for DrakX and drakbootdisk
-
-2001/08/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/automatic.c: don't stay automatic for ask_from_entries when
-	entries are not given
-
-	* mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/cdrom.c,
-	mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/mount.h,
-	mdk-stage1/network.c, mdk-stage1/modules.c, mdk-stage1/disk.c: mount all
-	but ramdisk Read Only
-
-2001/08/22  Pixel  <pixel@mandrakesoft.com>
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: fix ru KOI8-R
-
-	* bootlook.pm: fix typo
-
-	* network/nfs.pm: pleac perl_checker
-
-	* install_steps.pm: do init_db inside pkg_inside otherwise LOG is closed
-	and rpmlib tries to write in it and ...
-	do not call configurePrinter if no printer is wanted
-
-	* interactive_gtk.pm: more intelligent setting back the selected value in
-	the clist and ctree
-	(done already for entry)
-	  - fix entries editing causing the cursor to go to the end of line
-	  - select the text
-
-	* c/stuff.xs.pm, pkgs.pm: do init_db inside pkg_inside otherwise LOG is
-	closed and rpmlib tries to write in it and ...
-
-2001/08/22  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: fixed int and float checking which should accept
-	negative number (added explicit
-	positive too), cleaned code for some perl idioms.
-
-	* install_steps.pm: updated configurePrinter to use foomatic printer
-	configuration.
-
-2001/08/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/automatic.c: don't stay automatic for ask_from_entries when
-	entries are not given
-
-	* mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/cdrom.c,
-	mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/mount.h,
-	mdk-stage1/network.c, mdk-stage1/modules.c, mdk-stage1/disk.c: mount all
-	but ramdisk Read Only
-
-2001/08/22  kjx
-
-	* share/po/zh_CN.GB2312.po: review
-	review
-
-2001/08/22  Pixel  <pixel@mandrakesoft.com>
-
-	* bootlook.pm: fix typo
-
-	* install_steps_auto_install.pm: don't have formatPartitions interactive
-	by default
-
-	* install_steps.pm: do not call configurePrinter if no printer is wanted
-
-2001/08/22  siegel
-
-	* share/po/de.po: new german version
-
-2001/08/21  dam's  <damien@mandrakesoft.com>
-
-	* Makefile: added rpcinfo to the tar
-	corrected bad Makefile : rpcinfo-flushed.c comes from tools.
-
-	* standalone/draknet: ergonomy correction
-
-	* network/tools.pm: corrected qq bug
-	corrected bug
-
-	* standalone/net_monitor: log updatede
-	removed memoty leak
-	time connection label
-
-2001/08/21  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: moved installation code of foomatic (only)
-	if a printer may be chosen.
-
-	* install_any.pm: fixed hd installation for urpmi.
-
-	* printerdrake.pm: slight rewrite of some perl idioms.
-
-2001/08/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po: updated Walloon file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-2001/08/21  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: add telnet-client-krb5 and ftp-client-krb5
-
-	* install_steps.pm: try to fix umount/remounting /tmp/hdimage in hd
-	install
-
-	* Makefile, share/po/Makefile: check presence of '$' in DrakX.pot
-
-	* fs.pm (read_fstab): don't expand symlink if the link goes in a directory
-
-	* install_any.pm: cleanup
-
-	* install_steps_interactive.pm: fix '$' in i18n message
-
-2001/08/21  siegel
-
-	* share/po/de.po: new german version
-
-2001/08/21  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: removed memoty leak
-	time connection label
-
-	* network/tools.pm, network/modem.pm, network/netconnect.pm,
-	network/ethernet.pm, network/isdn.pm: generik internet initscript, planq
-	the children again
-
-	* network/adsl.pm: speedtouch config
-	generik internet initscript, planq the children again
-
-2001/08/21  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed hd installation for urpmi.
-
-2001/08/21  kjx
-
-	* share/po/zh_CN.GB2312.po: review
-
-2001/08/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/08/21  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix spelling error
-
-	* install_any.pm: cleanup
-	install hotplug if usb (i kept usbd just in case)
-
-	* diskdrake_interactive.pm (Create): force no sorting on filesystems,
-	editable mount points
-
-	* install_steps.pm: try to fix umount/remounting /tmp/hdimage in hd
-	install
-
-	* Makefile, share/po/Makefile: check presence of '$' in DrakX.pot
-
-	* install_steps_interactive.pm: fix '$' in i18n message
-
-	* fs.pm (read_fstab): don't expand symlink if the link goes in a directory
-	umask=0 only if security level < 3
-
-2001/08/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssUsers: Have NETWORKING_DNS in "Internet station" (was
-	nowhere)
-
-2001/08/20  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: basic nfs handling in drakx
-	fix bug 4257
-
-	* detect_devices.pm (raidAutoStart): fix for when kmod is there
-
-	* fsedit.pm: try a stronger matching technique for parsing /proc/mdstat
-	with devfs
-
-	* diskdrake_interactive.pm, install_any.pm, install_steps.pm: try harder
-	to umount /tmp/hdimage only when needed
-
-	* Makefile.drakxtools, Makefile, tools/rpcinfo-flushed.c, network/nfs.pm,
-	tools/.cvsignore, tools/Makefile, diskdrake.pm: basic nfs handling in
-	drakx
-
-2001/08/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssUsers: Have NETWORKING_DNS in "Internet station" (was
-	nowhere)
-
-2001/08/20  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: add weird options for NeoMagic NM2160 (request
-	of Alex Hulse <axh0@aber.ac.uk> on cooker)
-
-	* detect_devices.pm (raidAutoStart): fix for when kmod is there
-
-	* diskdrake.pm: remove test code
-
-	* fs.pm: fix bug 4257
-
-	* fsedit.pm: try a stronger matching technique for parsing /proc/mdstat
-	with devfs
-
-	* install_steps.pm, diskdrake_interactive.pm, install_any.pm: try harder
-	to umount /tmp/hdimage only when needed
-
-	* interactive_gtk.pm (wait_message_nextW): fix previous text == new text
-	causing no
-	expose_event causing dead loop
-
-2001/08/19  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: save fstab on exit
-
-	* fsedit.pm: various typos fix
-
-	* install_steps.pm: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-	make the devfs= mount or nomount choice based on raid-based root work
-
-	* standalone/diskdrake: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-	fix diskdrake requiring gtk
-	add some test code
-
-	* fs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are
-	removed unless we're in ramdisk
-	various typos fix
-
-	* install_steps_interactive.pm, common.pm, install2.pm, install_any.pm,
-	lang.pm, pkgs.pm: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-
-2001/08/19  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: major fs.pm rework + adaptation to it
-	don't show nfs/smb/removable in install
-	basic smb handling
-
-	* network/smb.pm: basic smb handling
-
-	* install_steps.pm: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-	make the devfs= mount or nomount choice based on raid-based root work
-	disable supermount for the moment
-	major fs.pm rework + adaptation to it
-
-	* install_steps_interactive.pm, lang.pm: rename isCdNotEjectable in
-	usingRamdisk, ensure no files are removed unless we're in ramdisk
-	simplify
-
-	* standalone/diskdrake: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-	fix diskdrake requiring gtk
-	add some test code
-	major fs.pm rework + adaptation to it
-
-	* install_any.pm: rename isCdNotEjectable in usingRamdisk, ensure no files
-	are removed unless we're in ramdisk
-	major fs.pm rework + adaptation to it
-
-	* partition_table.pm: remove JFS from @important_types (too broken for the
-	moment)
-	remove isSupermount (was unused)
-
-	* common.pm, install2.pm, pkgs.pm: rename isCdNotEjectable in
-	usingRamdisk, ensure no files are removed unless we're in ramdisk
-
-	* interactive_gtk.pm (create_ctree): fix focusing (the assumption number
-	of leaves = number of lines is dumb)
-
-	* fsedit.pm: various typos fix
-	major fs.pm rework + adaptation to it
-
-	* bootlook.pm, standalone/drakboot: major fs.pm rework + adaptation to it
-
-	* fs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are
-	removed unless we're in ramdisk
-	various typos fix
-	major fs.pm rework + adaptation to it
-	cleanup
-	basic smb handling
-
-	* diskdrake_interactive.pm: save fstab on exit
-	major fs.pm rework + adaptation to it
-
-2001/08/18  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: basic nfs/smb handling in diskdrake
-	fixes and function prototype removing
-
-	* diskdrake.pm: basic nfs/smb handling in diskdrake
-	nicer mount options code (for autofs and supermount)
-
-	* install_steps.pm: oops, i inverted devfs=nomount and devfs=mount
-
-	* interactive_gtk.pm: fix bug in box's height use
-
-	* partition_table.pm, any.pm: fixes and function prototype removing
-
-	* interactive.pm: readd the sorting based on size when no sorting is
-	precised
-
-	* my_gtk.pm (n_line_size): bigger spacing for 'various'
-
-	* standalone/diskdrake, diskdrake_interactive.pm, fsedit.pm: basic nfs/smb
-	handling in diskdrake
-
-2001/08/18  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm (n_line_size): bigger spacing for 'various'
-	enhance look, fix ask_fileW
-
-	* fs.pm: basic nfs/smb handling in diskdrake
-	fixes and function prototype removing
-	(write_fstab): add notail for reiserfs partitions in any case
-	cleanup mounting options parsing
-
-	* diskdrake.pm: basic nfs/smb handling in diskdrake
-	nicer mount options code (for autofs and supermount)
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-	cleanup mounting options parsing
-
-	* raid.pm: update the raid size as it should be
-
-	* diskdrake_interactive.pm: basic nfs/smb handling in diskdrake
-	less verbose resize_reiserfs
-	update the raid size as it should be
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-
-	* fsedit.pm: basic nfs/smb handling in diskdrake
-	update the raid size as it should be
-
-	* network/tools.pm: fix typo
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-
-	* partition_table.pm: fixes and function prototype removing
-
-	* install_steps_interactive.pm, standalone/drakautoinst, proxy.pm,
-	install_interactive.pm, network/ethernet.pm, interactive_http.pm,
-	printerdrake.pm, Xconfigurator.pm, network/netconnect.pm,
-	network/network.pm, interactive_newt.pm, network/modem.pm: big renaming
-	of ask_from_entries_refH in ask_from and ask_from_entries_refH_powered
-	in ask_from_
-
-	* standalone/diskdrake: basic nfs/smb handling in diskdrake
-
-	* any.pm: fixes and function prototype removing
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-
-	* interactive_gtk.pm: fix bug in box's height use
-	better radiobox keyboard handling
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-	enhance look, fix ask_fileW
-
-	* interactive.pm: readd the sorting based on size when no sorting is
-	precised
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-
-	* install_steps.pm: oops, i inverted devfs=nomount and devfs=mount
-	do not use devfs with root software raid
-
-2001/08/18  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix pass $all_hds->{hds} instead of
-	$all_hds
-
-2001/08/18  siegel
-
-	* share/po/de.po: new german version
-
-	* standalone/drakgw, bootlook.pm, network/ethernet.pm, install_any.pm,
-	network/network.pm, raid.pm: fixed i18n
-
-	* printerdrake.pm: i18n fixes
-
-2001/08/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm: use diskdrake_interactive instead of diskdrake
-
-	* standalone/interactive_http/interactive_http.cgi: fix typo
-	restrict the progs callable to a few one.
-
-	* standalone/interactive_http/index.html.pl,
-	standalone/interactive_http/index.html: autogenerate index.html
-
-	* fs.pm, diskdrake_interactive.pm, diskdrake.pm: add mount options choice
-	(with IA-like stripping of unused options)
-
-	* c/stuff.xs.pm: is_ext3 is needed in standalone
-	Xtest not needed in standalone
-
-	* c/Makefile.PL: is_ext3 is needed in standalone
-
-	* standalone/interactive_http/miniserv.init,
-	standalone/interactive_http/Makefile: restrict the progs callable to a
-	few one.
-
-	* Makefile.drakxtools: fix po not build, add interactive_http in DIRS
-
-	* modules.pm: move back sunhme in sparc only
-
-2001/08/17  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: no scrollbar if list <= 10 and the list is alone
-
-	* interactive.pm, install2.pm: removed no_incon
-
-	* standalone/net_monitor: added no internet connection configured label on
-	button
-
-	* network/netconnect.pm, network/ethernet.pm: corrected connection script
-	creation
-
-2001/08/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm: use diskdrake_interactive instead of diskdrake
-	a hell lot of cleanup/rewrite:
-	* diskdrake_interactive created, diskdrake is now interactive aware
-	* added some documentation about the structure used for partitioning
-	* all_hds now contain the various hds, lvm, raid
-	* cleanup the isLVM, isRAID and alike functions
-	* field {type} in detect_devices is now {media_type}
-	* detect_devices::floppies is now floppies_dev
-	* removed old function prototypes
-
-	* fs.pm, diskdrake.pm: add mount options choice (with IA-like stripping of
-	unused options)
-	a hell lot of cleanup/rewrite:
-	* diskdrake_interactive created, diskdrake is now interactive aware
-	* added some documentation about the structure used for partitioning
-	* all_hds now contain the various hds, lvm, raid
-	* cleanup the isLVM, isRAID and alike functions
-	* field {type} in detect_devices is now {media_type}
-	* detect_devices::floppies is now floppies_dev
-	* removed old function prototypes
-
-	* install_steps_interactive.pm, install_steps_auto_install.pm,
-	install2.pm, partition_table.pm, loopback.pm, raid.pm, bootlook.pm,
-	standalone/diskdrake, install_any.pm, install_steps.pm, fsedit.pm,
-	any.pm, detect_devices.pm, partition_table_raw.pm, bootloader.pm: a hell
-	lot of cleanup/rewrite:
-	* diskdrake_interactive created, diskdrake is now interactive aware
-	* added some documentation about the structure used for partitioning
-	* all_hds now contain the various hds, lvm, raid
-	* cleanup the isLVM, isRAID and alike functions
-	* field {type} in detect_devices is now {media_type}
-	* detect_devices::floppies is now floppies_dev
-	* removed old function prototypes
-
-	* diskdrake_interactive.pm: add mount options choice (with IA-like
-	stripping of unused options)
-	(part_possible_actions): have possible actions sorted the way we want
-	(Type): fix ext2->ext3 detection
-	a hell lot of cleanup/rewrite:
-	* diskdrake_interactive created, diskdrake is now interactive aware
-	* added some documentation about the structure used for partitioning
-	* all_hds now contain the various hds, lvm, raid
-	* cleanup the isLVM, isRAID and alike functions
-	* field {type} in detect_devices is now {media_type}
-	* detect_devices::floppies is now floppies_dev
-	* removed old function prototypes
-
-	* modules.pm: move back sunhme in sparc only
-
-2001/08/17  Till Kamppeter <till@mandrakesoft.com>
-
-	* share/rpmsrate: Corrected listing of packages for printing in 'INSTALL'
-	section.
-
-2001/08/17  warly
-
-	* share/rpmsrate: add package needed by the install in INSTALL
-	remove shapecfg and gpa
-
-2001/08/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed bug of CUPS not being installed during
-	installation
-
-2001/08/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm, install_any.pm: add remove_unused to have more place for mo
-	files
-
-2001/08/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed bug of CUPS not being installed during
-	installation
-
-2001/08/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: add remove_unused to have more place for mo files
-	(getAndSaveAutoInstallFloppy): fix a missing del_loop which caused the
-	unmounting at end of install to fail
-
-	* install2.pm: add remove_unused to have more place for mo files
-
-2001/08/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed setup dialog for the "postpipe" connection type
-
-2001/08/16  warly
-
-	* share/rpmsrate: add package needed by the install in INSTALL
-
-2001/08/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po: updated French file
-
-	* share/po/sk.po: updated Slovak file
-
-	* lang.pm: Added explicit setting of XFree86 internal XIM for Thai
-
-2001/08/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (getAndSaveAutoInstallFloppy): fix a missing del_loop
-	which caused the
-	unmounting at end of install to fail
-
-2001/08/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed setup dialog for the "postpipe" connection type
-
-2001/08/16  warly
-
-	* share/rpmsrate: add package needed by the install in INSTALL
-	add kernel in INSTALL
-	s/DrakConf/drakconf/
-
-2001/08/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/it.po, share/po/id.po: updated Indonesian,
-	Italian and Korean files
-
-	* share/po/sr.po, share/po/sp.po, share/po/tr.po: updated Turkish and
-	Serbian files
-
-2001/08/15  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/diskdrake: oops reverting modifs commited by error
-	fix XkbOptions handling
-
-	* standalone/keyboarddrake: fix XkbOptions handling
-
-2001/08/15  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Let the "Options" button only appear when
-	the queue is Foomatic or with PPD (CUPS)
-
-2001/08/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/it.po: updated Indonesian, Italian and Korean
-	files
-
-	* share/po/es.po: updated spanish and Indonesian files
-
-	* share/po/id.po: updated Indonesian, Italian and Korean files
-	updated spanish and Indonesian files
-
-2001/08/14  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: added options
-
-2001/08/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: oops, fix type of installing X or not
-	  - fix choice of packages when auto install
-
-	* Makefile.config: add drakautoinst in drakxtools standalone binaries
-
-	* install_steps_interactive.pm, install2.pm: 
-	  - fix createBootdisk with auto
-	  - fix setupBootloader with auto
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* install_steps.pm, network/netconnect.pm: 
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* Xconfigurator.pm: fix automatic configuration
-
-2001/08/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-
-2001/08/14  Pixel  <pixel@mandrakesoft.com>
-
-	* devices.pm: add number-only device-name handling (eg: "801" is "sda1")
-
-	* interactive_gtk.pm, interactive.pm: 
-	  - small fixes (esp. gtk sensitive handling)
-	  - add ask_file
-	  - add "gtk" preference field
-
-	* my_gtk.pm: remove ask_file (was unused)
-
-	* http.pm: cleanup to please perl_checker
-
-	* Makefile (TAGS): add MDK/Common files
-
-	* services.pm: cleanup (it was working, but wasn't nice)
-
-2001/08/14  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corrected activation button
-
-2001/08/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: oops, fix type of installing X or not
-	  - fix choice of packages when auto install
-
-	* Makefile.config: add drakautoinst in drakxtools standalone binaries
-
-	* install_steps_interactive.pm, install2.pm: 
-	  - fix createBootdisk with auto
-	  - fix setupBootloader with auto
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* install_steps.pm, network/netconnect.pm: 
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* Xconfigurator.pm: fix automatic configuration
-
-2001/08/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-
-2001/08/14  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix typo?
-
-2001/08/14  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Transfer queues non-interactively when switching
-	between LPD and LPRng.
-
-2001/08/14  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corrected activation button
-
-2001/08/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm, install2.pm,
-	network/netconnect.pm: 
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* Xconfigurator.pm: fix automatic configuration
-
-	* install_any.pm: 
-	  - fix choice of packages when auto install
-
-2001/08/14  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix typo?
-
-2001/08/14  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Removed superfluous lines.
-
-	* printerdrake.pm: Transfer queues non-interactively when switching
-	between LPD and LPRng.
-	Wait message for queue transfer, manufacturer name bugfix
-
-2001/08/13  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* tools/i386/netboot/stage2.eepro100: Add eepro100 grub stage.
-	Removing old version of eepro100 (no stage1).
-
-	* tools/i386/netboot/stage1.eepro100: Add eepro100 grub stage.
-
-2001/08/13  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm: corrected 'no icon'
-
-	* network/adsl.pm, network/netconnect.pm: adsl autodetection activated
-	(planq the children)
-
-2001/08/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakautoinst: ouch! use lib from /usr/lib/libDrakX, rather
-	than from ..
-	initial revision for drakautoinst
-	  - put %installSteps in a separate package (steps.pm) (for drakxtools)
-	  - use additional fields {auto} and {noauto}, by step, to ease
-	interactive auto install and oem stuff
-	  - in install2.pm, perform each step either from the interactive class
-	or from install_steps, according to the {auto} flag
-	  - id, tell each step to not try to be automatic if {noauto}
-	  - in the install, have auto install bootdisk created in install_any so
-	we can always write a bootdisk (from install_steps) for further use from
-	drakautoinst in standalone
-	  - interactive version of install_steps_auto_install is now inheriting
-	from the interactive class, so we can click on a previous automatic step
-	and have it interactively during an interactive auto install
-
-	* install_steps.pm, install_steps_interactive.pm,
-	install_steps_auto_install.pm, install2.pm, steps.pm, install_any.pm:
-	initial revision for drakautoinst
-	  - put %installSteps in a separate package (steps.pm) (for drakxtools)
-	  - use additional fields {auto} and {noauto}, by step, to ease
-	interactive auto install and oem stuff
-	  - in install2.pm, perform each step either from the interactive class
-	or from install_steps, according to the {auto} flag
-	  - id, tell each step to not try to be automatic if {noauto}
-	  - in the install, have auto install bootdisk created in install_any so
-	we can always write a bootdisk (from install_steps) for further use from
-	drakautoinst in standalone
-	  - interactive version of install_steps_auto_install is now inheriting
-	from the interactive class, so we can click on a previous automatic step
-	and have it interactively during an interactive auto install
-
-2001/08/13  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm, install2.pm, install_any.pm, steps.pm:
-	auto_inst enhancements
-
-	* install_steps_interactive.pm, standalone/XFdrake, install_steps.pm,
-	Xconfigurator.pm: really use a class_discard for Xconfigurator::main
-
-	* devices.pm: add /dev/hd[mt] handling
-
-2001/08/13  siegel
-
-	* share/po/de.po: new german version
-
-2001/08/13  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Automatic transfer of queues when changing the spooler.
-	Update printer queue list when exiting during install, so that the
-	"Summary" entry is correct.
-	When one sayd "No" on the test page, the modify dialog was not pointing
-	to the current printer
-
-	* printer.pm: Automatic transfer of queues when changing the spooler.
-	The photo test page was not printed during installation.
-
-	* interactive.pm: Tree lists are sorted again now.
-
-2001/08/13  yduret
-
-	* standalone/drakxconf: removed diskdrake from the choice
-
-2001/08/12  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: longer timeout
-
-2001/08/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix ortograf typo
-
-2001/08/12  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile: po->mo is no longer gonna be nasty with us
-
-	* interactive_gtk.pm: clean the nice till fix
-
-	* tools/cvslog2changelog.pl: add till
-
-	* Makefile: ensure locales.tar.bz2 in perl-install/share is build
-	po->mo is no longer gonna be nasty with us
-
-2001/08/12  Till Kamppeter <till@mandrakesoft.com>
-
-	* interactive.pm: Lists get only sorted when the "sort" option is given.
-
-	* printer.pm, printerdrake.pm: Check files before checking RPM database =>
-	Acceleration, waiting windows
-
-2001/08/11  dam's  <damien@mandrakesoft.com>
-
-	* share/themes.rc, share/logo-mandrake.png, share/themes-mdk.rc,
-	share/themes/mdk-bg.png: new theme for beta
-
-	* share/theme-editor.pl: updated
-	now works.
-
-2001/08/11  tkamppeter
-
-	* printer.pm, printerdrake.pm: Restructuring continued and debugged
-
-2001/08/10  dam's  <damien@mandrakesoft.com>
-
-	* share/theme-editor.pl: added theme editor
-
-	* network/tools.pm: corrected password file substitution
-
-	* network/ethernet.pm: remove Data::Dumper
-
-	* network/netconnect.pm: added spped and timeout handling for isdn
-
-	* any.pm: corrected autologin question
-
-	* network/isdn.pm: tomeout option deactivated.
-
-	* standalone/draknet: corrected internet cnfiguration pop up, and some
-	other studds
-	ifup/down ethx, anew pixmap for list
-
-	* my_gtk.pm: removed Datta::Dump use
-
-	* pixmaps/eth_card_mini2.png: added
-
-2001/08/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: small font fix
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* share/po/bg.po: updated Bulgarian file
-	updated pot file
-
-2001/08/10  yduret
-
-	* bootlook.pm: corrected vnew usage (thx gc)
-
-2001/08/09  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: added missing use
-	added pixmap for eth. Some factorisation
-
-	* network/tools.pm: added useless function type2interface for future use
-
-	* my_gtk.pm: added gtkbuttonset, and corrected scrollbar height for
-	standalone mode.
-
-	* network/isdn.pm: labels corrections
-
-2001/08/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/tinyfirewall, standalone/printerdrake, standalone/mousedrake,
-	standalone/drakxservices, standalone/net_monitor, standalone/draknet,
-	standalone/drakproxy, standalone/XFdrake, standalone/keyboarddrake,
-	standalone/drakxconf, standalone/adduserdrake, standalone/livedrake,
-	standalone/drakboot, standalone/draksec: use vnew the right way
-	everywhere
-
-	* standalone/drakgw: use vnew the right way everywhere
-	  - if package installs fail, redo one by one to know which one failed
-	  - try to not end up with a failing configuration file, if program is
-	brutally stopped
-	  - if unrecognized config file, don't fail, rather ignore it and
-	proceed
-	  - run dhcpd_update feature (if present) after setup of dhcp server
-
-	* share/rpmsrate: put traceroute in network client also, for claudio
-
-2001/08/09  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone.pm, install_any.pm: rename interactive_pkgs in
-	pkgs_interactive
-
-2001/08/09  siegel
-
-	* standalone/interactive_http/miniserv.logrotate,
-	standalone/interactive_http/Makefile: Added logrotate for
-	"/var/log/drakxtools_http.log"
-
-2001/08/09  tkamppeter
-
-	* printer.pm, printerdrake.pm: New structure for queue modification,
-	general structure clean-up
-
-2001/08/09  yduret
-
-	* bootlook.pm: readded in->do_pkg->install (i sux)
-	rewrite in a more drakx fashion
-
-	* my_gtk.pm: added gtkset_sensitive in wrapper..
-
-2001/08/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/08/08  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: typo
-	makes interactive_pkgs stuff work
-	add interactive_pkgs stuff
-
-	* Makefile: skip module CGI in test_pms (perl_checker)
-
-	* fsedit.pm (check_mntpoint): remove /root from directories that "should
-	remain within the root filesystem"
-
-	* proxy.pm, network/ethernet.pm, network/isdn.pm, tinyfirewall.pm,
-	printerdrake.pm, standalone/drakgw, standalone/draknet,
-	network/tools.pm, bootlook.pm, standalone.pm, standalone/drakproxy,
-	standalone/XFdrake, network/netconnect.pm, standalone/adduserdrake,
-	network/adsl.pm, network/network.pm, printer.pm, network/modem.pm: add
-	interactive_pkgs stuff
-
-	* install_steps_interactive.pm: installing foomatic before doing anything
-	about printer
-	add interactive_pkgs stuff
-
-	* Xconfigurator.pm, any.pm: makes interactive_pkgs stuff work
-	add interactive_pkgs stuff
-
-	* install_any.pm (remove, remove_nodeps): fix typo
-	makes interactive_pkgs stuff work
-	add interactive_pkgs stuff
-
-2001/08/08  tkamppeter
-
-	* install_steps_interactive.pm: Installation fitted to new printerdrake
-
-	* printer.pm: Different choosable test pages available now
-	Corrected init script calls in the (start|stop|restart)_service
-	functions
-
-	* printerdrake.pm: Different choosable test pages available now
-	Removed superfluous line in install_spooler function
-
-2001/08/08  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (naughtyServers): add drakxtools-http
-
-2001/08/07  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: nex features
-
-	* network/netconnect.pm: removed debugging message
-
-	* network/isdn.pm: corrected pkgs use -> require
-
-	* my_gtk.pm: added gtkset_relief
-
-	* pixmaps/network.png, pixmaps/draknet_step.png: added
-
-2001/08/07  Pixel  <pixel@mandrakesoft.com>
-
-	* pixmaps/network.png, pixmaps/draknet_step.png: re-adding with -kb
-	removing for re-adding with -kb
-
-2001/08/07  tkamppeter
-
-	* printer.pm, printerdrake.pm: Automatic installation of all needed
-	packages
-
-2001/08/07  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corrected label
-
-	* network/netconnect.pm: removed debugging message
-
-	* standalone/net_monitor: nex features
-	added color choice
-	lot of improvments
-
-	* network/isdn.pm: corrected pkgs use -> require
-
-	* my_gtk.pm: added gtkset_relief
-
-	* pixmaps/network.png, pixmaps/draknet_step.png: added
-
-2001/08/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c: say that it's a data read error, when we can't load
-	the ramdisk
-
-	* mdk-stage1/Makefile.common, mdk-stage1/bzlib/bzlib.h: don't use system
-	wide bzlib.h but our own provided one
-
-2001/08/07  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/tree/etc/issue: fix distrib number
-
-	* interactive.pm: adding http feature, mainly for standalone tools
-
-	* standalone/miniserv.pem, standalone/miniserv.pl: Initial revision
-	import
-
-	* standalone/interactive_http/miniserv.pl: add interactive_http
-	Initial revision
-
-	* resize_fat/main.pm: fix
-
-	* partition_table.pm: nicer names for journalised fs
-
-	* Makefile.drakxtools, standalone/interactive_http/miniserv.init,
-	standalone/interactive_http/index.html,
-	standalone/interactive_http/interactive_http.cgi,
-	standalone/interactive_http/miniserv.conf,
-	standalone/interactive_http/miniserv.pam,
-	standalone/interactive_http/miniserv.users, Makefile,
-	standalone/interactive_http/Makefile: add interactive_http
-
-	* interactive_http.pm, standalone/interactive_http.cgi: add
-	interactive_http
-	adding http feature, mainly for standalone tools
-
-	* share/diskdrake.rc: have every journalised in darkred
-
-	* c/stuff.xs.pm: add S_IFIFO
-
-	* standalone/interactive_http/miniserv.pem: Initial revision
-
-2001/08/06  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: debugging, profile coding, isdn 128 debugging
-	corrected gtkradio : shift instead of pop
-
-	* interactive_gtk.pm, install_steps_gtk.pm: corrected gtkradio : shift
-	instead of pop
-
-	* network/netconnect.pm, network/ethernet.pm, network/isdn.pm: debugging,
-	profile coding, isdn 128 debugging
-
-2001/08/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/i386/busybox: try a busybox with better globbing under the SHELL
-
-2001/08/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/de.po: Updates to German file by Peer Dunker <peer46@gmx.net>
-
-	* share/po/vi.po: updated Vietnamese file
-
-2001/08/06  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm: kernel_arch removed
-
-	* fsedit.pm (@suggestions_mntpoints): remove /root (tx2gc)
-
-	* interactive_gtk.pm, interactive_newt.pm: cleanup, functions already
-	defined in interactive
-
-2001/08/06  yduret
-
-	* tinyfirewall.pm: use MDK::Common;
-	use network::netconnect;
-
-	* standalone/drakgw: use MDK::Common;
-	use network::netconnect; and update functions call from netconnect
-
-2001/08/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eo.po: updated Esperanto file
-
-2001/08/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm: switch to gtk install when
-	interactiveSteps is defined
-
-2001/08/05  tkamppeter
-
-	* printer.pm, printerdrake.pm: Automatic installation and start of the
-	desired printer spooler
-
-2001/08/04  Pixel  <pixel@mandrakesoft.com>
-
-	* share/list: add tune2fs enabling switching from ext2 to ext3
-
-	* fs.pm, fsedit.pm, partition_table.pm: add ext3 support
-
-	* diskdrake.pm: add ext3 support
-	(Type): handle lossless switch from ext2 to ext3
-
-	* pkgs.pm: make perl_checker happy
-
-	* c/stuff.xs.pm, c/Makefile.PL: add is_ext3
-
-	* common.pm: moved arch() and alike to MDK::Common::System
-
-2001/08/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (choosePackages): simplify, fix
-	setSelectedFromCompssList not called in
-	expert even the first_time (especially nasty for auto_installs)
-
-	* fs.pm, partition_table.pm, fsedit.pm: add ext3 support
-
-	* diskdrake.pm: add ext3 support
-	(Type): handle lossless switch from ext2 to ext3
-
-	* install_steps_gtk.pm: add the feather feature, but do not enable it
-
-	* interactive_gtk.pm (ask_browse_tree_info_refW): s/wait_msg/wait_message/
-	(wait_msg doesn't
-	exist anywhere, it must be a fpons typo)
-
-	* pkgs.pm: make perl_checker happy
-
-	* c/stuff.xs.pm, c/Makefile.PL: add is_ext3
-
-	* bootloader.pm: as when lilo is selected, we don't try to install grub,
-	just create the
-	config file in case it may be useful
-
-	* common.pm: moved arch() and alike to MDK::Common::System
-
-	* partition_table_raw.pm: add yaboot detection
-
-	* install_any.pm, share/rpmsrate: create a new flags "X" selected by
-	default, contain what X related packages
-	which were in "SYSTEM"
-
-2001/08/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (choosePackages): simplify, fix
-	setSelectedFromCompssList not called in
-	expert even the first_time (especially nasty for auto_installs)
-
-	* install_steps_gtk.pm: add the feather feature, but do not enable it
-
-	* bootloader.pm: as when lilo is selected, we don't try to install grub,
-	just create the
-	config file in case it may be useful
-
-	* interactive_gtk.pm (ask_browse_tree_info_refW): s/wait_msg/wait_message/
-	(wait_msg doesn't
-	exist anywhere, it must be a fpons typo)
-
-	* share/rpmsrate, install_any.pm: create a new flags "X" selected by
-	default, contain what X related packages
-	which were in "SYSTEM"
-
-2001/08/03  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor, network/tools.pm, network/netconnect.pm,
-	network/isdn.pm: debugging, 128Kb/s ISDN
-
-	* Makefile.drakxtools, Makefile: added network pms
-
-2001/08/03  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm: typo fix
-	replace isJfs/isXfs/... with isThisFs("jfs"
-
-	* install_any.pm: replace isJfs/isXfs/... with isThisFs("jfs"
-	update_userkderc is now called update_gnomekderc
-
-	* Makefile: better po skipping
-
-	* commands.pm (sync): (re-?)add
-
-	* fs.pm, install_steps_interactive.pm, diskdrake.pm, bootloader.pm:
-	replace isJfs/isXfs/... with isThisFs("jfs"
-
-	* fsedit.pm (check_mntpoint): /root should remain within the root
-	filesystem
-
-	* install_steps.pm (choosePartitionsToFormat): toFormatUnsure=1 for /usr
-	update_userkderc is now called update_gnomekderc
-
-2001/08/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/adsl.c: 
-	  - fix problem of clashing user/pass between adsl and ftp/http in case
-	of automatic installs
-	  - update doc on automatic install parameters (doc/TECH-INFOS)
-
-	* mdk-stage1/doc/TECH-INFOS: 
-	  - small update
-	  - fix problem of clashing user/pass between adsl and ftp/http in case
-	of automatic installs
-	  - update doc on automatic install parameters (doc/TECH-INFOS)
-
-2001/08/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-2001/08/02  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm, services.pm, install_interactive.pm,
-	network/netconnect.pm, install_any.pm, Xconfigurator.pm: instead of
-	testing if ref($in) or ref($o) contains /gtk/, test if interactive_gtk
-	is in ISA of the object
-
-	* partition_table.pm, fsedit.pm, diskdrake.pm: JFS support
-
-2001/08/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/adsl.c: 
-	  - fix problem of clashing user/pass between adsl and ftp/http in case
-	of automatic installs
-	  - update doc on automatic install parameters (doc/TECH-INFOS)
-
-	* mdk-stage1/doc/TECH-INFOS: 
-	  - small update
-	  - fix problem of clashing user/pass between adsl and ftp/http in case
-	of automatic installs
-	  - update doc on automatic install parameters (doc/TECH-INFOS)
-
-2001/08/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-2001/08/02  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: instead of testing if ref($in) or ref($o) contains
-	/gtk/, test if interactive_gtk is in ISA of the object
-	add jfs support
-
-	* install_steps_interactive.pm, services.pm, install_interactive.pm,
-	network/netconnect.pm, Xconfigurator.pm: instead of testing if ref($in)
-	or ref($o) contains /gtk/, test if interactive_gtk is in ISA of the
-	object
-
-	* partition_table.pm: JFS support
-	add jfs support
-
-	* fsedit.pm, diskdrake.pm: JFS support
-
-	* tools/ntp_servers.pl, timezone.pm: update ntp servers list
-
-	* fs.pm, share/list: add jfs support
-
-2001/08/02  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/ntp_servers.pl, timezone.pm: update ntp servers list
-
-	* fs.pm, share/list, partition_table.pm, install_any.pm: add jfs support
-
-2001/08/01  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: write_on_text writes in blue instead of black
-
-	* network/isdn.pm: typo
-	added de-installation before installateion
-
-	* network/netconnect.pm: translation correction
-
-2001/08/01  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, fsedit.pm: handle auto_allocate_raids for
-	auto_installs
-
-	* raid.pm (new): now works with a list of partitions
-
-2001/08/01  tkamppeter
-
-	* printer.pm: Fixed bug in recognizing the printer ID in the Foomatic
-	overview.
-
-2001/08/01  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: write_on_text writes in blue instead of black
-
-	* network/isdn.pm: typo
-	added de-installation before installateion
-
-	* network/netconnect.pm: translation correction
-
-2001/08/01  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, fsedit.pm: handle auto_allocate_raids for
-	auto_installs
-
-	* raid.pm (new): now works with a list of partitions
-
-2001/07/31  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: added splash screen between different
-	configurations. Added splash wizard mode
-	added intro step for each configuration type.
-
-	* network/tools.pm: corrected ask_connect_now
-
-	* my_gtk.pm: added write_on pixmap : a function to write text on pixma,
-	using fonts.
-
-	* network/ethernet.pm: added intro step for each configuration type.
-
-2001/07/31  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps_interactive.pm: after copying the auto install floppy,
-	sync in case you shall remove the
-	floppy right after the LED switches off yet the kernel decides to not
-	flush
-	everything
-
-	* modules.pm, mdk-stage1/modules_descr.h: have "catc" driver for usbnet
-	installs
-
-	* bootloader.pm: load msdos and vfat before mkbootdisk (now using syslinux
-	so..)
-
-2001/07/31  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (translate): empty string translation is an empty string
-
-	* install_gtk.pm (test_mouse): s/my (.*) = 0 if 0/my $1 if 0/
-
-	* share/rpmsrate: add cpio
-	lower gurpmi (5->4)
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: chineese locale
-	support
-	better handling of locales
-
-	* Makefile.drakxtools (install): s/cp -rf/cp -rfL/   (-L = --dereference,
-	aka always follow symbolic links)
-
-	* install_steps_gtk.pm (installPackages): make $show_advertising a global
-	state (for Vincent Meyer)
-
-	* share/Makefile, Makefile: better handling of locales
-
-	* install_steps_auto_install.pm: remove bad prototype
-
-2001/07/30  dam's  <damien@mandrakesoft.com>
-
-	* network/ethernet.pm: added cable internet connection selection
-	added internet connection selection in case of multiple configurations
-
-	* network/netconnect.pm: corrected ask_connect_now behaviour
-	corrected ask_connect_now
-	debug
-	added internet connection selection in case of multiple configurations
-
-	* network/adsl.pm, network/tools.pm, network/modem.pm, network/isdn.pm:
-	corrected ask_connect_now
-	added internet connection selection in case of multiple configurations
-
-2001/07/30  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (getDeps): ensure "depslist.ordered has not same package as
-	hdlist files"
-	occurs when the hdlists are in fact not available
-
-	* share/locales.tar.bz2.ppc, share/locales.tar.bz2,
-	share/locales.tar.bz2.sparc, share/.cvsignore, share/gen_locales.sh,
-	share/locales-skeleton.tar.bz2: automatic handling of locales.tar.bz2
-	based on installed glibc
-
-	* printer.pm, printerdrake.pm: use MDK::Common
-	i wonder why it was included and Till used an older version without
-	merging?
-
-	* resize_fat/main.pm: switch to MDK::Common (i wonder why it was not done
-	yet)
-
-	* share/rpmsrate: raise rxvt (4->5)
-	lower rpmdrake & harddrake (5->4)
-	remove rootfiles (unneeded)
-
-	* Makefile: use -excludeMDK::Common::Globals for perl_checker
-	automatic handling of locales.tar.bz2 based on installed glibc
-
-2001/07/30  tkamppeter
-
-	* printer.pm, printerdrake.pm: In beginners mode one chooses only the
-	printer, not the driver (default driver)
-
-2001/07/30  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: debug
-	added internet connection selection in case of multiple configurations
-
-	* network/adsl.pm, network/tools.pm, network/modem.pm, network/isdn.pm:
-	added internet connection selection in case of multiple configurations
-
-	* network/ethernet.pm: added cable internet connection selection
-	added internet connection selection in case of multiple configurations
-
-2001/07/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/config-stage1.h:
-	have a memory limit also for Rescue (different one)
-
-2001/07/30  Pixel  <pixel@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: use MDK::Common
-	i wonder why it was included and Till used an older version without
-	merging?
-
-	* resize_fat/main.pm: switch to MDK::Common (i wonder why it was not done
-	yet)
-
-	* share/rpmsrate: raise rxvt (4->5)
-	lower rpmdrake & harddrake (5->4)
-	remove rootfiles (unneeded)
-
-	* pkgs.pm (getDeps): ensure "depslist.ordered has not same package as
-	hdlist files"
-	occurs when the hdlists are in fact not available
-
-	* Makefile: use -excludeMDK::Common::Globals for perl_checker
-	automatic handling of locales.tar.bz2 based on installed glibc
-
-	* share/locales.tar.bz2.ppc, share/locales.tar.bz2,
-	share/locales.tar.bz2.sparc, share/.cvsignore, share/gen_locales.sh,
-	share/locales-skeleton.tar.bz2: automatic handling of locales.tar.bz2
-	based on installed glibc
-
-2001/07/28  tkamppeter
-
-	* printer.pm, printerdrake.pm: Support for PPD files of PostScript
-	printers (when CUPS is used)
-
-2001/07/27  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: fixed undeselectable group when 'Other' sub-tree
-	is seen as a package.
-
-	* interactive_gtk.pm: allow ask_browse_tree_info_refW to return 0 on
-	cancel (previously always 1).
-	added a before leaving code to clean added reference (else it seems to
-	bahave
-	strangely on changing steps).
-	fixed wrong reference to added icons to ask_browse_tree_info_refW.
-
-	* services.pm: allow cancel on services which do not change anything.
-
-	* install_steps_interactive.pm: changed warn dialog to okcancel dialog
-	when asking user to insert Boot floppy
-	used or Update Modules floppy (die may cause to rerun install else).
-
-2001/07/27  gbeauchesne
-
-	* install_steps_gtk.pm: 
-	  - install_steps_gtk.pm (launchX) : create /var/log, if not existent,
-	for
-	XFree86.log
-
-2001/07/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: allow to escape from Update Modules if you don't
-	want to insert an ext2 floppy
-	Disk -> Floppy for Update Modules disk
-
-2001/07/27  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* share/locales.tar.bz2.ppc, keyboard.pm, help.pm, partition_table.pm,
-	Xconfigurator.pm: last of sync with PPC beta mods
-
-2001/07/27  tkamppeter
-
-	* standalone/printerdrake, printer.pm, printerdrake.pm: Printerdrake
-	changed to use Foomatic, driver options, spooler change
-
-2001/07/26  dam's  <damien@mandrakesoft.com>
-
-	* network/isdn.pm: added firmware loading/configuration
-	not loading the module at detection.
-
-	* standalone/draknet: MDK::common correction
-
-	* modules.pm: added default option id="HiSax" to isdn module
-
-2001/07/26  fcrozat
-
-	* share/po/fr.po: Fix spelling of 'molette'
-
-2001/07/26  François Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: added blank and updatemodules options to DrakX.
-
-	* bootloader.pm: added prioritary kernel entry 'default' as the kernel
-	typically copied from a
-	modified blank.img file with a kernel (no initrd.img necessary to
-	build).
-	This kernel takes precedance over any other kernel.
-
-	* install_steps_interactive.pm: really fixes Diskette with Floppy.
-	fix typo as Diskette to Floppy.
-	add support for new modules load as described by GG.
-
-	* install_steps.pm: fixed some silly typo and tiny bugs.
-	fixed typo as Diskette to Floppy.
-	add support for modified blank.img floppy and Update Modules floppy.
-	In first case copy kernel to /boot/vmlinuz-default to be taken into
-	account by
-	bootloader suggestion method.
-	In second case, check installed kernel and update any modules listed in
-	the
-	Update Modules floppy.
-
-2001/07/26  gbeauchesne
-
-	* bootloader.pm: 
-	  - Don't set "lba32" on ia64
-
-2001/07/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/modules.c: pass
-	"--blank" to DrakX when module loading is disabled
-	  - add "changedisk" feature
-	  - add "updatemodules" feature
-
-	* mdk-stage1/tools.c, mdk-stage1/doc/UPDATEMODULES, mdk-stage1/stage1.h: 
-	  - add "changedisk" feature
-	  - add "updatemodules" feature
-
-	* mdk-stage1/probing.c: silently load usb controllers
-
-2001/07/25  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: fixed new network organization
-
-	* standalone/net_monitor: updated. Profile handling.
-
-	* network/isdn_consts.pm: updated ISDN detection. Added firmware handling
-	and drivers other than hisax
-
-2001/07/25  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed no test (or die test) to void package read on depslist
-	(allowed to keep
-	package indexing good on multi-arch).
-	cleaned code to examine depslist.ordered and packages list.
-
-	* rescue/make_rescue_img: fixed to use perl-MDK-Common.
-
-	* tools/syncrpms: fixed still missing rpmtools:: before a version_compare
-	...
-
-2001/07/25  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules_descr.h: small typo
-
-	* mdk-stage1/init.c, mdk-stage1/newt-frontend.c: Use Yahve quoting
-
-2001/07/25  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile (install): build mo's
-
-	* commands: move to MDK::Common, bool->to_bool
-
-	* common.pm: do not export sync, keep it in common (esp. so that it
-	doesn't conflict with my_gtk::sync
-	(removeXiBSuffix): add TB (tera)
-
-	* share/po/i18n_compssUsers, rescue/make_rescue_img: use MDK::Common
-
-	* share/verify_modules.pl: new common syntax
-
-	* Makefile: 
-	  - temporary hack to have at least good UTF-8 based locales (otherwise
-	rpmlib segfaults)
-	  - touch share/po/*.po, so that they are not rebuilded (pablo takes
-	care of them)
-
-	* share/list: add MDK::Common::Globals
-
-	* partition_table_sun.pm, install2.pm, partition_table.pm, commands.pm,
-	install_steps.pm, partition_table_raw.pm, partition_table_mac.pm: do not
-	export sync, keep it in common (esp. so that it doesn't conflict with
-	my_gtk::sync
-
-2001/07/25  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mdk-stage1/modules_descr.h: add decriptions for integrated Apple
-	Network/SCSI hardware
-
-2001/07/24  dam's  <damien@mandrakesoft.com>
-
-	* network/isdn_consts.pm, network/netconnect.pm, network/ethernet.pm:
-	corrected speed fax + PCI, updated configuration
-
-2001/07/24  daouda
-
-	* bootlook.pm: better runlevel handling -> persistent level choice
-
-2001/07/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/07/24  Pixel  <pixel@mandrakesoft.com>
-
-	* commands.pm: move to MDK::Common, bool->to_bool
-	fix syntax
-	removed/renamed unused/seldom-used functions
-	generalize the use of chomp_ as the functional alternative to chomp (and
-	works on lists)
-
-	* swap.pm: temporary hack to have at least good UTF-8 based locales
-	(otherwise rpmlib segfaults)
-	move to MDK::Common, bool->to_bool
-
-	* unused/scsi.pm, standalone/draknet: generalize the use of chomp_ as the
-	functional alternative to chomp (and works on lists)
-
-	* globals.pm, perl2fcalls: 
-	  - globals is now MDK::Common::Globals
-	  - perl2fcalls is now /usr/bin/perl_checker
-
-	* install_steps_gtk.pm: move to MDK::Common, bool->to_bool
-	move to MDK::Common, bool->to_bool
-	removed/renamed unused/seldom-used functions
-
-	* common.pm: move to MDK::Common, bool->to_bool
-	cleanup (remove unused stuff and dangerous prototypes)
-	removed/renamed unused/seldom-used functions
-	generalize the use of chomp_ as the functional alternative to chomp (and
-	works on lists)
-
-	* network/tools.pm, network/adsl.pm, network/netconnect.pm,
-	network/ethernet.pm, network/isdn.pm, network/modem.pm: 
-	  - globals is now MDK::Common::Globals
-	  - perl2fcalls is now /usr/bin/perl_checker
-	move to MDK::Common, bool->to_bool
-
-	* partition_table_dos.pm, partition_table_empty.pm, my_gtk.pm, modparm.pm,
-	standalone/keyboarddrake, install2.pm, raid.pm, crypto.pm,
-	partition_table_mac.pm, standalone/mousedrake, devices.pm,
-	install_steps.pm, resize_fat/main.pm, help.pm, install_interactive.pm,
-	install_steps_stdio.pm, loopback.pm, resize_fat/any.pm,
-	standalone/drakboot, pkgs.pm, keyboard.pm, Xconfigurator.pm, fs.pm,
-	interactive_gtk.pm, standalone/drakxservices, fsedit.pm,
-	network/network.pm, interactive_stdio.pm, diskdrake.pm, modules.pm,
-	resize_fat/directory.pm, standalone/net_monitor,
-	install_steps_auto_install.pm, partition_table_sun.pm, proxy.pm,
-	lang.pm, partition_table_bsd.pm, tinyfirewall.pm, standalone/draksec,
-	standalone/drakxconf, resize_fat/info_sector.pm,
-	standalone/adduserdrake, sbus_probing/main.pm, printer.pm,
-	partition_table_raw.pm, install_steps_interactive.pm, install_gtk.pm,
-	Xconfigurator_consts.pm, resize_fat/boot_sector.pm, partition_table.pm,
-	standalone/livedrake, standalone/drakgw, mouse.pm, lvm.pm,
-	interactive.pm, share/list, interactive_newt.pm, install_steps_newt.pm,
-	bootloader.pm: move to MDK::Common, bool->to_bool
-
-	* services.pm, printerdrake.pm: move to MDK::Common, bool->to_bool
-	removed/renamed unused/seldom-used functions
-
-	* standalone/diskdrake, install_any.pm, any.pm, Xconfig.pm, timezone.pm,
-	detect_devices.pm, bootlook.pm: move to MDK::Common, bool->to_bool
-	generalize the use of chomp_ as the functional alternative to chomp (and
-	works on lists)
-
-	* Makefile: temporary hack to have at least good UTF-8 based locales
-	(otherwise rpmlib segfaults)
-	move to MDK::Common, bool->to_bool
-	move to MDK::Common, bool->to_bool
-
-2001/07/23  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm, network/tools.pm, network/isdn_consts.pm,
-	network/netconnect.pm, network/isdn.pm: isdn now works with isdn-light.
-	Only 64kb/s and still some debuf stuff to be fixed.
-
-2001/07/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/sk.po: updated Slovak and Croatian files
-
-2001/07/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: cleanup
-
-	* c/stuff.xs.pm, Makefile.drakxtools, standalone.pm, common.pm, Makefile,
-	tools/make_mdkinst_stage2, lang.pm, share/po/Makefile,
-	share/po/.cvsignore: do not use the po's directly. Use mo's through
-	gettext
-
-2001/07/22  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm, network/isdn.pm: updated isdn config, moved
-	isdn_data from netconnect_const to isdn_const
-	big work on isdn. Not finished
-
-	* modules.pm, standalone/net_monitor, network/tools.pm, detect_devices.pm:
-	big work on isdn. Not finished
-
-	* network/netconnect_consts.pm, network/isdn_consts.pm: updated isdn
-	config, moved isdn_data from netconnect_const to isdn_const
-
-2001/07/20  François Pons  <fpons@mandrakesoft.com>
-
-	* docs/README.pxe: initial release, dhcpd and tftpd only.
-
-2001/07/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/el.po: updated Greek file
-
-2001/07/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile: externalize the pm 2 pm_.c in fake_c.pl
-
-	* lang.pm: fix
-	(load_po): enhance readability
-
-	* share/po/fake_c.pl: cleanup
-	externalize the pm 2 pm_.c in fake_c.pl
-
-	* common.pm (translate): basic plural forms handling (not finished)
-
-	* help.pm: fix missing ``"''
-
-	* bootloader.pm: fix
-	(install_lilo): order fat partitions first
-
-2001/07/19  dam's  <damien@mandrakesoft.com>
-
-	* share/themes.rc, share/logo-mandrake.png, share/themes-mdk.rc,
-	share/help.png: new color
-
-	* network/netconnect.pm: correct bug. thanx to the little stagiaire.
-
-2001/07/19  François Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated with new
-	graphic logo for 8.1
-
-2001/07/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po,
-	share/po/eo.po, share/po/fr.po, share/po/wa.po, share/po/da.po,
-	share/po/de.po, share/po/el.po, share/po/et.po, share/po/hu.po,
-	share/po/eu.po: updated Croatian file
-
-2001/07/19  François Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated with new
-	graphic logo for 8.1
-
-	* Xconfigurator.pm: fixed problable freeze on pci probe.
-
-2001/07/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po,
-	share/po/eo.po, share/po/fr.po, share/po/wa.po, share/po/da.po,
-	share/po/de.po, share/po/el.po, share/po/et.po, share/po/hu.po,
-	share/po/eu.po: updated Croatian file
-
-2001/07/19  Pixel  <pixel@mandrakesoft.com>
-
-	* globals.pm: no strict 'refs' instead of 'vars'
-
-	* services.pm: rename ask_install_gtk in ask_install, ask_install is now
-	ask_install_simple (obsolete)
-
-	* install_steps_auto_install.pm: fix exit install in graphical
-	auto_install's
-
-2001/07/19  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm, install_steps_newt.pm, install2.pm: based
-	on Michael Brown <mbrown@fensystems.co.uk> patch:
-	  - enables graphical steps in auto_installs for more than gtk
-	  - various cleanup
-
-	* globals.pm: no strict 'refs' instead of 'vars'
-
-	* services.pm: rename ask_install_gtk in ask_install, ask_install is now
-	ask_install_simple (obsolete)
-
-2001/07/18  mbadaire
-
-	* modules.pm, install_any.pm, bootloader.pm: IA64 adaptation
-
-2001/07/18  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* modules.pm, install_steps.pm, install_steps_interactive.pm,
-	tools/serial_probe/serial.c, detect_devices.pm, partition_table_mac.pm,
-	diskdrake.pm: roll back some changes from PPC beta - OldWorld vs
-	NewWorld bootloader
-	modem detection on ttyS0, new sound module in 2.4.4
-
-2001/07/17  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: disabled Frame buffer for all S3 cards (hangs with XF4
-	and S3 ViRGE on reboot
-	with Aurora).
-
-	* Xconfigurator.pm: cleaned and added S3 Inc in the list to disable test
-	for these card.
-
-2001/07/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/rpmsrate: removed references to XFree86-ISO8859-{2,9} packages (no
-	more used)
-
-	* keyboard.pm: small keyboard changes
-
-2001/07/13  tvignaud
-
-	* share/po/fr.po: update
-
-2001/07/12  François Pons  <fpons@mandrakesoft.com>
-
-	* fs.pm: fixed wrong examination of fsck return code (exit code 1 says
-	fsck succeeded in
-	fixing partition and now is ok).
-
-	* run_program.pm: changed exit code of failed exec in rooted to 128
-	instead of 1 (may clash with
-	exit code of fsck else).
-
-	* any.pm: fixed bug for writing in /etc/sysconfig/desktop file.
-
-2001/07/12  François Pons  <fpons@mandrakesoft.com>
-
-	* interactive.pm: added ask_browse_tree_info and ask_browse_tree_info_refW
-	(default).
-
-	* services.pm: reworked to use new service layout for install.
-
-	* install_steps_gtk.pm: use common code for tree with info dialog
-	(individual package selection).
-
-	* fs.pm: fixed wrong examination of fsck return code (exit code 1 says
-	fsck succeeded in
-	fixing partition and now is ok).
-
-	* interactive_gtk.pm: merging common code for individual package selection
-	and service to create
-	ask_browse_tree_info_refW, added featrures for group icon always
-	up-to-date
-	(take some memory but not too much, not used if flat model).
-
-	* run_program.pm: changed exit code of failed exec in rooted to 128
-	instead of 1 (may clash with
-	exit code of fsck else).
-
-	* any.pm: fixed bug for writing in /etc/sysconfig/desktop file.
-
-2001/07/10  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mdk-stage1/init.c, mdk-stage1/Makefile.common: minor mods for PPC build,
-	define TIOCSCTTY, Makefile mods
-
-2001/07/09  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added multiple tries if a transaction of only one package
-	fails.
-
-	* install_any.pm: added LDAP support for authentication.
-
-	* install_steps_interactive.pm: added LDAP support for password
-	authentication, updated root password window look.
-
-	* bootloader.pm: fixed compilation error.
-	removed compilation error, the resolution is not quite good and may be
-	reworked :-)
-
-	* help.pm: updated root password help.
-
-2001/07/09  mbadaire
-
-	* bootloader.pm: modify lilo.conf to elilo.conf if arch ia64
-
-	* common.pm: Add IA64 support
-
-2001/07/08  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (suggest): replace "is ia64" with "is not ia64" so that
-	boot partition is
-	set correctly again
-
-2001/07/08  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (suggest): replace "is ia64" with "is not ia64" so that
-	boot partition is
-	set correctly again
-
-2001/07/06  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed selected_leaves. change algorithm as previous one can
-	still causes dead
-	lock and may not reproduce correct list. take care of choice that need
-	to be
-	examined before else another package may be chosen if choice is not
-	satisfied
-	when selecting packages.
-
-	* install_any.pm: change all 8 space into a tabulation, this is simple and
-	may change visual
-	aspect but it gives correct output and filesize by 40%.
-
-2001/07/06  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed selected_leaves. change algorithm as previous one can
-	still causes dead
-	lock and may not reproduce correct list. take care of choice that need
-	to be
-	examined before else another package may be chosen if choice is not
-	satisfied
-	when selecting packages.
-
-	* install_any.pm: change all 8 space into a tabulation, this is simple and
-	may change visual
-	aspect but it gives correct output and filesize by 40%.
-
-2001/07/06  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/ntp_servers.pl: some workarounds
-
-2001/07/06  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/ntp_servers.pl: some workarounds
-
-2001/07/05  François Pons  <fpons@mandrakesoft.com>
-
-	* keyboard.pm: added DISABLE_WINDOWS_KEY in /etc/sysconfig/keyboard if a
-	laptop is detected.
-
-2001/07/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules_descr.h: add usb net descriptions
-
-2001/07/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm (file2part): created
-
-	* any.pm: ia64 bootloader configuration adaptations
-
-	* bootloader.pm: typo fix
-	ia64 bootloader configuration adaptations
-
-2001/07/04  dam's  <damien@mandrakesoft.com>
-
-	* globals.pm: added error handling
-
-	* network/netconnect.pm, network/ethernet.pm: modularized. It compiles,
-	runs, and works for some stuff.
-	modularization continuated
-	updated CVS:
-	----------------------------------------------------------------------
-	uses the fantastic global module.
-	corrected
-
-	* standalone/draknet: corrected
-
-	* network/tools.pm, network/adsl.pm: modularized. It compiles, runs, and
-	works for some stuff.
-	updated CVS:
-	----------------------------------------------------------------------
-	uses the fantastic global module.
-	corrected
-
-	* network/network.pm: modularized. It compiles, runs, and works for some
-	stuff.
-	modularization continuated
-
-	* network/isdn.pm, network/modem.pm: modularized. It compiles, runs, and
-	works for some stuff.
-	updated CVS:
-	----------------------------------------------------------------------
-	uses the fantastic global module.
-
-	* docs/net_object_class.fig: updated doc
-
-2001/07/04  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added missing last Card read from Cards+ file.
-	allow S3 card to have VideoRam uncommented, fix 86c368 video driver that
-	seems
-	needing VideoRam too.
-	fixed need of video ram if 86c368 and S3 ViRGE.
-
-	* install_any.pm: another too wide string truncated to 80 chars.
-	make auto_inst.cfg file no longer than 80 chars wide.
-
-	* install_steps_interactive.pm: added back timezone settings (thanks
-	FredC).
-
-2001/07/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/adsl.c: nonsense to exit if interface is not "eth.*"
-
-	* mdk-stage1/newt-frontend.c: very nice things happen when you hardcode
-	arrays to a too small value
-
-	* docs/HACKING: update -d in order to get all the directories...
-
-2001/07/04  mbadaire
-
-	* tools/ia64/elilo.efi, tools/specific_arch, share/list.ia64,
-	tools/ia64/e2fsck.shared: Ia64 Adaptation
-
-	* install_gtk.pm, share/list.i386, common.pm, share/list.ppc, share/list,
-	share/list.alpha, install_steps_gtk.pm, share/list.sparc: Ia64
-	adaptation
-
-2001/07/04  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (selected_leaves): fix dead-loop
-	(selected_leaves): make it work with loops (eg: mandrake_desk loops with
-	control-center resulting on none of them being a leaf)
-
-	* perl2fcalls: check exclude_uses before reporting bad use of "use"
-	exclude module globals from use's to look at
-
-	* globals.pm (import): yet another fix
-	fix a pb when init is called before another import
-	typo correction
-	enhanced: shared values are grouped together based on a name
-	module to share constant values between modules
-
-	* fsedit.pm: add /boot/efi in suggestions for ia64
-
-	* install_interactive.pm, install_steps.pm: fix typo
-	verify a /boot/efi partition exists
-
-	* Makefile, install_any.pm, share/list.ppc, share/list.alpha, share/list,
-	share/list.sparc: remove busybox as default shell. Only use it as the
-	interactive shell on tty2
-
-2001/07/03  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/netconnect_consts.pm, network/tools.pm,
-	network/modem.pm, network/netconnect.pm, network/isdn.pm: network
-	subsystem now compiles. Enjoy
-
-	* docs/net_object_class.fig: documentation about net modules structure
-
-2001/07/03  François Pons  <fpons@mandrakesoft.com>
-
-	* network/netconnect.pm: fix another dam's sucks
-	fix dam's sucks
-
-	* network/netconnect_consts.pm, Makefile.config: fix dam's sucks
-
-	* standalone/XFdrake: expert is allowed to choose frame buffer.
-
-	* install_steps_interactive.pm: added loadSavePackagesOnFloppy to manage
-	package selection file used by
-	auto_install too from packages tree directly on floppies.
-
-	* share/floppy.png: updated size to 16x22 to be more aligned.
-	for loading/saving packages selection.
-
-	* install_any.pm: modified g_default_packages to be used from package tree
-	save on floppy.
-
-	* install_steps_gtk.pm: added Load/Save on floppy.
-	added improve choice of package, well not very usefull but asked by
-	higher
-	people :-)
-
-2001/07/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/rp-pppoe/gui/html/props-basic.png,
-	mdk-stage1/rp-pppoe/gui/html/props-options.png,
-	mdk-stage1/rp-pppoe/gui/html/props-advanced.png,
-	mdk-stage1/rp-pppoe/gui/html/mainwin-busy.png,
-	mdk-stage1/rp-pppoe/gui/html/mainwin-nonroot.png,
-	mdk-stage1/rp-pppoe/gui/html/mainwin.png,
-	mdk-stage1/rp-pppoe/gui/html/props-nic.png: plop
-
-	* modules.pm, mdk-stage1/probing.h, mdk-stage1/.cvsignore,
-	mdk-stage1/usb-resource/Makefile,
-	mdk-stage1/usb-resource/update-usb-ids.pl, mdk-stage1/Makefile,
-	mdk-stage1/usb-resource/.cvsignore, mdk-stage1/probing.c: add support
-	for install from USB Network Adapters
-
-2001/07/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/es.po,
-	share/po/fr.po, share/po/sr.po, share/po/de.po, share/po/el.po,
-	share/po/et.po, share/po/sk.po, share/po/tr.po, share/po/eu.po,
-	share/po/ru.po, share/po/sl.po, share/po/vi.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/wa.po, share/po/da.po,
-	share/po/sv.po, share/po/zh_TW.Big5.po: updated Danish file
-
-2001/07/03  Pixel  <pixel@mandrakesoft.com>
-
-	* timezone.pm (configureTimezone): propose a list of NTP servers
-	(ntp_server): fix
-	add ntp handling
-
-	* fs.pm (mount): fix fsck.ext2'ing
-	(mount): add fsck.ext2 before ext2-mounting
-
-	* share/themes/DarkMarble-gloom2.png: re-adding with -kb
-	re-adding with -kb
-
-	* pixmaps/user.png: re-adding with -kb
-	removing for re-adding with -kb
-	re-adding with -kb
-	removing for re-adding with -kb
-
-	* share/themes/blueHeart-button4.png, share/reload.png,
-	share/themes/focus.png, share/themes/DarkMarble-button3_in.png,
-	share/logo-mandrake.png, share/themes/marble3d-check1.png,
-	share/themes/blueHeart-button_def.png, share/rpm-semiselected.png,
-	share/logo-mandrake-Desktop.png, share/themes/marble3d-check2.png,
-	share/rpm-installed.png, share/themes/marble3d-button1.png,
-	share/logo-mandrake_sav.png, share/themes/mdk-button1.png,
-	share/themes/DarkMarble-check_off.png, pixmaps/harddrive.png,
-	share/themes/marble3d-button_def.png, share/themes/marble3d-button2.png,
-	share/help_sav.png, share/themes/DarkMarble-button3_out_prelight.png,
-	pixmaps/services.png, pixmaps/bootdisk.png, share/rpm-selected.png,
-	share/themes/marble3d-button4.png, pixmaps/bootloader.png,
-	share/themes/DarkMarble-button3_out.png, share/logo-mandrake_trans.png,
-	share/themes/mdk-button4.png, pixmaps/printer.png, share/rpm-base.png,
-	share/logo-mandrake2.png, share/themes/blueHeart-brown_bg1.png,
-	share/themes/marble3d-bg1.png, pixmaps/security.png, share/ftin.png,
-	pixmaps/rootpasswd.png, share/help.png,
-	share/themes/DarkMarble-check_on.png,
-	share/themes/blueHeart-button1.png, pixmaps/keyboard.png,
-	pixmaps/default.png, share/themes/blueHeart-button2.png, pixmaps/X.png,
-	share/themes/DarkMarble-button3_in_prelight.png, share/ftout.png,
-	pixmaps/mouse.png, share/rpm-unselected.png: re-adding with -kb
-	removing for re-adding with -kb
-
-	* install_any.pm, install_steps.pm: add ntp handling
-
-	* tools/addchangelog.pl: reverted the last erroneous modif
-	re-adding with -kb
-
-	* tools/ntp_servers.pl: get a formatted list of NTP servers from an
-	authorised source
-
-	* install_steps_interactive.pm (doPartitionDisks): better error message
-	when no root partition is found
-	(configureTimezone): propose a list of NTP servers
-	add ntp handling
-
-	* docs/comparisons: re-adding with -kb
-
-2001/07/02  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm: new network sources reorganizationCVS:
-	----------------------------------------------------------------------
-
-	* share/list: added modinfo
-
-	* modparm.pm: syntax correction
-
-	* network/netconnect_consts.pm, network.pm, standalone/draknet,
-	network/tools.pm, netconnect.pm, network/netconnect.pm,
-	network/ethernet.pm, network/isdn.pm, network/adsl.pm,
-	network/network.pm, network/modem.pm, netconnect_consts.pm: new network
-	sources reorganization
-
-2001/07/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: update po files
-
-2001/07/02  Pixel  <pixel@mandrakesoft.com>
-
-	* crypto.pm: remove buggy prototype
-
-	* share/po/Makefile: yet even better i18n strings extraction
-	  - fix to add some missing messages
-	  - add more verif
-
-	* c/stuff.xs.pm: use size_t instead of int where it should
-
-	* Xconfigurator.pm (write_XF86Config): fix fpons sucks (multi wacoms in
-	XF3)
-
-	* share/po/b_dump_strings.pm: high level i18n messages getting. only
-	partial stuff. Used only for verification
-
-	* perl2fcalls: add handling of using pkg::func when func is provided by
-	pkg2 use'd by pkg
-
-2001/06/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/id.po: updated Indonesian file
-
-2001/06/25  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm: switch from llseek to lseek64
-
-2001/06/23  siegel
-
-	* share/po/de.po: new german version
-
-2001/06/22  François Pons  <fpons@mandrakesoft.com>
-
-	* bootloader.pm: take care of enterprise kernel if installed.
-
-	* install_any.pm: automagically install kernel-enterprise if memory is
-	greater than 800MB.
-
-2001/06/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: unfuzzyise
-
-2001/06/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, tinyfirewall.pm,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, help.pm, share/po/zh_TW.Big5.po,
-	share/po/it.po, share/po/id.po, install_steps_interactive.pm,
-	share/po/pl.po, share/po/no.po, share/po/fi.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	install_steps_gtk.pm, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, bootlook.pm, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	install_steps_newt.pm, share/po/af.po: s/Linux-Mandrake/Mandrake Linux/
-
-2001/06/21  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added minimal support for rpmtools >= 3.0
-
-2001/06/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: generate_automatic_stage1_params: listize
-	use busybox for the shell of stage2
-
-	* mdk-stage1/Makefile: defaults to not spawn shell
-
-	* mdk-stage1/hack: kloug
-
-	* Makefile, tools/i386/busybox, share/list.ppc, share/list,
-	share/list.alpha, share/aliases: use busybox for the shell of stage2
-
-2001/06/21  Pixel  <pixel@mandrakesoft.com>
-
-	* docs/README, rescue/tree/etc/issue: s/Linux-Mandrake/Mandrake Linux/
-	s/linux-mandrake/mandrakesoft/
-	(hand made, no i18n messages done)
-	s/Linux-Mandrake/Mandrake Linux/
-	s/linux-mandrake/mandrakesoft/
-	(hand made, no i18n messages done)
-
-	* genmodparm: remove duplicate, look in gi/tools
-
-	* standalone/printerdrake, install2, docs/HACKING, tools/genmodparm,
-	mdk-stage1/config-stage1.h, ChangeLog, resize_fat/README,
-	standalone/diskdrake, standalone/XFdrake, rescue/tree/etc/rc.sysinit,
-	mdk-stage1/init.c, tools/mailchangelog.pl, detect_devices.pm,
-	mdk-stage1/doc/README, resize_fat/main.pm, tools/cvslog2changelog.pl,
-	bootloader.pm: s/Linux-Mandrake/Mandrake Linux/
-	s/linux-mandrake/mandrakesoft/
-	(hand made, no i18n messages done)
-
-	* mdk-stage1/make_boot_img: remove GG sux
-	s/Linux-Mandrake/Mandrake Linux/
-	s/linux-mandrake/mandrakesoft/
-	(hand made, no i18n messages done)
-
-2001/06/11  dam's  <damien@mandrakesoft.com>
-
-	* proxy.pm: updated
-	typoCVS:
-	----------------------------------------------------------------------
-	proxy
-
-	* my_gtk.pm: added gtkset_layout
-
-	* standalone/drakproxy: corrected CVS:
-	----------------------------------------------------------------------
-	updated
-	perlised
-
-	* interactive.pm: no icon if wizard
-
-2001/06/11  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: added some bigger memory range.
-
-	* Xconfigurator.pm: fix missing newline on /etc/X11/glx.conf when
-	modifying mga_dma = 0
-	really fix the Matrox G200 PCI card acceleration using XF3, by disabling
-	DMA on
-	/etc/X11/glx.conf
-	added magic probe of resolution found, if the probed resolution seems
-	strange
-	according to memory available, it try to let the user select the right
-	resolution and depth.
-
-	* install_steps.pm, printer.pm: applied patches given for printer
-	configuration bug reported by David Eastcott.
-
-2001/06/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: have PPP drivers in net_raw rather than in net
-	add PPP modules for 'net' drivers
-
-	* rescue/tree/etc/rc.sysinit: minor changes
-
-	* rescue/tree/etc/inittab, rescue/tree/sbin/fakeshutdown: umount as much
-	as possible before rebooting the rescue
-
-	* mdk-stage1/ppp/pppd/magic.c, mdk-stage1/ppp/pppd/md5.c,
-	mdk-stage1/ppp/pppd/utils.c, mdk-stage1/ppp/pppd/pathnames.h,
-	mdk-stage1/ppp/pppd/options.c, mdk-stage1/ppp/pppd/main.c,
-	mdk-stage1/ppp/pppd/multilink.c, mdk-stage1/ppp/pppd/auth.c: have adsl
-	pppoe installation available
-	Initial revision
-	import initial ppp sources
-
-	* mdk-stage1/dhcp.c: change location of error message when no reply
-	received
-
-	* mdk-stage1/rp-pppoe/man/pppoe-relay.8,
-	mdk-stage1/rp-pppoe/configs/firewall-masq,
-	mdk-stage1/rp-pppoe/gui/html/props-nic.png,
-	mdk-stage1/rp-pppoe/src/pppoe-sniff.c,
-	mdk-stage1/rp-pppoe/configs/firewall-standalone,
-	mdk-stage1/rp-pppoe/gui/html/tkpppoe.html,
-	mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE, mdk-stage1/rp-pppoe/go-gui,
-	mdk-stage1/rp-pppoe/gui/tkpppoe.in, mdk-stage1/rp-pppoe/man/adsl-stop.8,
-	mdk-stage1/rp-pppoe/scripts/adsl-start.in,
-	mdk-stage1/rp-pppoe/man/pppoe-sniff.8, mdk-stage1/rp-pppoe/go,
-	mdk-stage1/rp-pppoe/man/pppoe.8,
-	mdk-stage1/rp-pppoe/gui/html/mainwin-nonroot.png,
-	mdk-stage1/rp-pppoe/gui/tkpppoe.1, mdk-stage1/rp-pppoe/src/Makefile.in,
-	mdk-stage1/rp-pppoe/src/pppoe.c, mdk-stage1/rp-pppoe/src/pppoe-server.c,
-	mdk-stage1/rp-pppoe/src/pppoe.h, mdk-stage1/rp-pppoe/gui/wrapper.c,
-	mdk-stage1/rp-pppoe/man/pppoe-server.8,
-	mdk-stage1/rp-pppoe/configs/pppoe.conf,
-	mdk-stage1/rp-pppoe/gui/html/props-advanced.png,
-	mdk-stage1/rp-pppoe/src/common.c, mdk-stage1/rp-pppoe/src/install-sh,
-	mdk-stage1/rp-pppoe/doc/LICENSE, mdk-stage1/rp-pppoe/src/configure,
-	mdk-stage1/rp-pppoe/src/config.h.in, mdk-stage1/rp-pppoe/src/relay.c,
-	mdk-stage1/rp-pppoe/src/discovery.c, mdk-stage1/rp-pppoe/src/if.c,
-	mdk-stage1/rp-pppoe/doc/CHANGES, mdk-stage1/rp-pppoe/src/relay.h,
-	mdk-stage1/rp-pppoe/scripts/adsl-init.in,
-	mdk-stage1/rp-pppoe/rp-pppoe.spec,
-	mdk-stage1/rp-pppoe/scripts/adsl-connect.in,
-	mdk-stage1/rp-pppoe/man/pppoe.conf.5,
-	mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in,
-	mdk-stage1/rp-pppoe/man/adsl-start.8,
-	mdk-stage1/rp-pppoe/gui/html/mainwin.png,
-	mdk-stage1/rp-pppoe/rp-pppoe-gui.spec,
-	mdk-stage1/rp-pppoe/gui/html/props-basic.png,
-	mdk-stage1/rp-pppoe/man/adsl-status.8,
-	mdk-stage1/rp-pppoe/configs/pppoe-server-options,
-	mdk-stage1/rp-pppoe/man/adsl-connect.8,
-	mdk-stage1/rp-pppoe/scripts/adsl-setup.in,
-	mdk-stage1/rp-pppoe/scripts/adsl-stop.in,
-	mdk-stage1/rp-pppoe/gui/Makefile.in, mdk-stage1/rp-pppoe/src/debug.c,
-	mdk-stage1/rp-pppoe/doc/PROBLEMS, mdk-stage1/rp-pppoe/src/ppp.c,
-	mdk-stage1/rp-pppoe/README,
-	mdk-stage1/rp-pppoe/gui/html/mainwin-busy.png,
-	mdk-stage1/rp-pppoe/gui/pppoe-wrapper.1,
-	mdk-stage1/rp-pppoe/scripts/adsl-status,
-	mdk-stage1/rp-pppoe/man/adsl-setup.8,
-	mdk-stage1/rp-pppoe/gui/html/props-options.png,
-	mdk-stage1/rp-pppoe/src/configure.in,
-	mdk-stage1/rp-pppoe/configs/pap-secrets, mdk-stage1/rp-pppoe/src/md5.c,
-	mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in,
-	mdk-stage1/rp-pppoe/src/md5.h, mdk-stage1/rp-pppoe/src/plugin.c,
-	mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT: Initial revision
-	import initial sources from rp-pppoe v3.0
-
-	* mdk-stage1/Makefile: change handling of .depend in Makefile
-	have adsl pppoe installation available
-
-	* mdk-stage1/newt-frontend.c: axalon sucks, we can have NEWT_FLAG_PASSWORD
-	that will show us '**' for passwords
-
-	* mdk-stage1/ppp/pppd/.cvsignore, mdk-stage1/ppp/.cvsignore,
-	mdk-stage1/ppp/pppd/Makefile, mdk-stage1/rp-pppoe/src/.cvsignore,
-	mdk-stage1/rp-pppoe/src/config.h, mdk-stage1/adsl.c,
-	mdk-stage1/rp-pppoe/.cvsignore, mdk-stage1/rp-pppoe/src/Makefile,
-	mdk-stage1/make_boot_img: have adsl pppoe installation available
-
-	* detect_devices.pm, install_any.pm, raid.pm, fsedit.pm: include patch to
-	autodetect raid arrays (still needs a kernel that implements the
-	ioctl..)
-
-	* tools/Makefile: perl 5.6.1 now
-
-	* mdk-stage1/stage1.c, mdk-stage1/tools.c: do not set root=/dev/ram3 from
-	my code anymore, expect the bootloader to set the parameter correctly
-
-	* mdk-stage1/ppp/scripts/ip-up.local.add, mdk-stage1/ppp/scripts/README,
-	mdk-stage1/ppp/solaris/Makefile.sol2,
-	mdk-stage1/ppp/svr4/ppp_comp.Master, mdk-stage1/ppp/sample/ip-down,
-	mdk-stage1/ppp/solaris/Makefile.sol2-64,
-	mdk-stage1/ppp/include/net/ppp_defs.h,
-	mdk-stage1/ppp/pppstats/Makefile.sunos4,
-	mdk-stage1/ppp/chat/Makefile.sol2, mdk-stage1/ppp/pppd/sys-linux.c,
-	mdk-stage1/ppp/pppd/ipxcp.c, mdk-stage1/ppp/pppd/ipxcp.h,
-	mdk-stage1/ppp/pppdump/deflate.c, mdk-stage1/ppp/pppd/Makefile.linux,
-	mdk-stage1/ppp/pppd/upap.c, mdk-stage1/ppp/modules/deflate.c,
-	mdk-stage1/ppp/README.sunos4, mdk-stage1/ppp/pppdump/Makefile.sol2,
-	mdk-stage1/ppp/configure, mdk-stage1/ppp/pppd/upap.h,
-	mdk-stage1/ppp/svr4/ppp_mod.c, mdk-stage1/ppp/pppstats/Makefile.sol2,
-	mdk-stage1/ppp/pppd/ipv6cp.c, mdk-stage1/ppp/scripts/options-ssh-loc,
-	mdk-stage1/ppp/pppd/plugins/Makefile.sol2, mdk-stage1/ppp/pppd/ipv6cp.h,
-	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.vt.c,
-	mdk-stage1/ppp/solaris/ppp_ahdlc_mod.c,
-	mdk-stage1/ppp/sunos4/if_ppp_vdcmd.c,
-	mdk-stage1/ppp/solaris/ppp_ahdlc.c, mdk-stage1/ppp/pppd/magic.h,
-	mdk-stage1/ppp/svr4/ppp_comp_mod.c,
-	mdk-stage1/ppp/include/linux/if_ppp.h, mdk-stage1/ppp/pppd/eui64.c,
-	mdk-stage1/ppp/scripts/secure-card, mdk-stage1/ppp/scripts/redialer,
-	mdk-stage1/ppp/modules/bsd-comp.c, mdk-stage1/ppp/pppd/eui64.h,
-	mdk-stage1/ppp/sunos4/ppp_vdcmd.c, mdk-stage1/ppp/modules/ppp_mod.h,
-	mdk-stage1/ppp/pppd/md5.h, mdk-stage1/ppp/pppd/chap_ms.c,
-	mdk-stage1/ppp/pppd/chap_ms.h, mdk-stage1/ppp/etc.ppp/pap-secrets,
-	mdk-stage1/ppp/solaris/Makefile.top, mdk-stage1/ppp/chat/chat.8,
-	mdk-stage1/ppp/svr4/Makefile.sol2-64, mdk-stage1/ppp/svr4/Makefile.sol2,
-	mdk-stage1/ppp/include/net/ppp-comp.h, mdk-stage1/ppp/sunos4/Makefile,
-	mdk-stage1/ppp/PLUGINS, mdk-stage1/ppp/pppdump/Makefile.sunos4,
-	mdk-stage1/ppp/sample/ip-up, mdk-stage1/ppp/sample/options.ttyXX,
-	mdk-stage1/ppp/scripts/options-rsh-rem, mdk-stage1/ppp/pppd/fsm.c,
-	mdk-stage1/ppp/chat/chat.c, mdk-stage1/ppp/scripts/ppp-on-rsh,
-	mdk-stage1/ppp/pppd/fsm.h, mdk-stage1/ppp/pppd/tdb.c,
-	mdk-stage1/ppp/pppd/patchlevel.h, mdk-stage1/ppp/pppstats/pppstats.8,
-	mdk-stage1/ppp/svr4/ppp.conf, mdk-stage1/ppp/pppd/tdb.h,
-	mdk-stage1/ppp/pppd/demand.c, mdk-stage1/ppp/include/net/if_ppp.h,
-	mdk-stage1/ppp/solaris/Makedefs, mdk-stage1/ppp/modules/if_ppp.c,
-	mdk-stage1/ppp/include/net/slcompress.h, mdk-stage1/ppp/sunos4/Makedefs,
-	mdk-stage1/ppp/pppd/sys-linux.c.wtmp,
-	mdk-stage1/ppp/include/linux/if_pppvar.h,
-	mdk-stage1/ppp/solaris/ppp_comp.c, mdk-stage1/ppp/chat/Makefile.linux,
-	mdk-stage1/ppp/README.cbcp, mdk-stage1/ppp/pppd/ppp.pam,
-	mdk-stage1/ppp/solaris/ppp_comp_mod.c, mdk-stage1/ppp/Changes-2.3,
-	mdk-stage1/ppp/sample/options, mdk-stage1/ppp/pppstats/pppstats.c,
-	mdk-stage1/ppp/sunos4/ppp_comp_vdcmd.c,
-	mdk-stage1/ppp/pppdump/Makefile.linux.pppdump-Makefile,
-	mdk-stage1/ppp/README.MSCHAP80, mdk-stage1/ppp/pppdump/pppdump.8,
-	mdk-stage1/ppp/sunos4/Makefile.top, mdk-stage1/ppp/include/net/pppio.h,
-	mdk-stage1/ppp/pppd/ipcp.c, mdk-stage1/ppp/FAQ,
-	mdk-stage1/ppp/pppd/ipcp.h, mdk-stage1/ppp/pppd/sys-sunos4.c,
-	mdk-stage1/ppp/modules/ppp_comp.c, mdk-stage1/ppp/README.sol2,
-	mdk-stage1/ppp/modules/vjcompress.c, mdk-stage1/ppp/scripts/ppp-on-ssh,
-	mdk-stage1/ppp/svr4/ppp_ahdlc_mod.c, mdk-stage1/ppp/sunos4/ppp.INSTALL,
-	mdk-stage1/ppp/modules/ppp.c, mdk-stage1/ppp/pppdump/pppdump.c,
-	mdk-stage1/ppp/pppd/plugins/passprompt.c,
-	mdk-stage1/ppp/pppdump/Makefile.linux, mdk-stage1/ppp/pppd/lcp.c,
-	mdk-stage1/ppp/pppd/lcp.h, mdk-stage1/ppp/scripts/chat-callback,
-	mdk-stage1/ppp/chat/Makefile.sunos4, mdk-stage1/ppp/SETUP,
-	mdk-stage1/ppp/pppd/Makefile.sol2,
-	mdk-stage1/ppp/pppd/plugins/minconn.c,
-	mdk-stage1/ppp/etc.ppp/options.options,
-	mdk-stage1/ppp/pppdump/Makefile.linux.makeopt,
-	mdk-stage1/ppp/svr4/ppp.Node, mdk-stage1/ppp/scripts/options-ssh-rem,
-	mdk-stage1/ppp/solaris/ppp.c, mdk-stage1/ppp/svr4/ppp.System,
-	mdk-stage1/ppp/etc.ppp/chap-secrets,
-	mdk-stage1/ppp/pppstats/Makefile.linux,
-	mdk-stage1/ppp/sample/pap-secrets,
-	mdk-stage1/ppp/pppd/Makefile.linux.make, mdk-stage1/ppp/pppd/pppd.8,
-	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.8,
-	mdk-stage1/ppp/pppd/Makefile.sunos4, mdk-stage1/ppp/scripts/ppp-on,
-	mdk-stage1/ppp/include/linux/ppp_defs.h,
-	mdk-stage1/ppp/scripts/chatchat/chatchat.c,
-	mdk-stage1/ppp/scripts/chatchat/README,
-	mdk-stage1/ppp/modules/ppp_ahdlc.c, mdk-stage1/ppp/svr4/ppp.Master,
-	mdk-stage1/ppp/svr4/Makedefs,
-	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.gtk.c,
-	mdk-stage1/ppp/svr4/ppp_ahdl.System, mdk-stage1/ppp/pppd/pppd.h,
-	mdk-stage1/ppp/scripts/ppp-off, mdk-stage1/ppp/solaris/Makedefs.sol2,
-	mdk-stage1/ppp/common/zlib.c, mdk-stage1/ppp/scripts/options-rsh-loc,
-	mdk-stage1/ppp/common/zlib.h, mdk-stage1/ppp/solaris/ppp_mod.c,
-	mdk-stage1/ppp/contrib/pppgetpass/Makefile.linux,
-	mdk-stage1/ppp/solaris/ppp_mod.h, mdk-stage1/ppp/scripts/ppp-on-dialer,
-	mdk-stage1/ppp/pppd/sys-solaris.c, mdk-stage1/ppp/README.linux,
-	mdk-stage1/ppp/sample/auth-down, mdk-stage1/ppp/svr4/ppp_ahdl.Master,
-	mdk-stage1/ppp/pppdump/zlib.c, mdk-stage1/ppp/include/pcap-int.h,
-	mdk-stage1/ppp/pppdump/zlib.h, mdk-stage1/ppp/pppd/ccp.c,
-	mdk-stage1/ppp/chat/Makefile.linux.makeopt, mdk-stage1/ppp/pppd/ccp.h,
-	mdk-stage1/ppp/pppd/Makefile.linux.makeopt,
-	mdk-stage1/ppp/include/net/vjcompress.h, mdk-stage1/ppp/pppd/cbcp.c,
-	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.sh,
-	mdk-stage1/ppp/pppd/cbcp.h, mdk-stage1/ppp/scripts/ip-down.local.add,
-	mdk-stage1/ppp/pppd/tty.c, mdk-stage1/ppp/include/linux/ppp-comp.h,
-	mdk-stage1/ppp/sample/auth-up, mdk-stage1/ppp/sunos4/ppp_ahdlc_vdcmd.c,
-	mdk-stage1/ppp/pppd/pppd.h.wtmp, mdk-stage1/ppp/solaris/ppp.conf,
-	mdk-stage1/ppp/pppd/chap.c, mdk-stage1/ppp/pppd/chap.h,
-	mdk-stage1/ppp/scripts/callback, mdk-stage1/ppp/linux/Makefile.top,
-	mdk-stage1/ppp/svr4/ppp_comp.System, mdk-stage1/ppp/pppd/md4.c,
-	mdk-stage1/ppp/svr4/Makedefs.sol2, mdk-stage1/ppp/pppdump/bsd-comp.c,
-	mdk-stage1/ppp/README, mdk-stage1/ppp/pppd/md4.h,
-	mdk-stage1/ppp/etc.ppp/options, mdk-stage1/ppp/svr4/Makefile.top,
-	mdk-stage1/ppp/svr4/Makefile.svr4,
-	mdk-stage1/ppp/pppd/plugins/Makefile.linux,
-	mdk-stage1/ppp/pppdump/ppp-comp.h: Initial revision
-	import initial ppp sources
-
-2001/06/11  odin
-
-	* standalone/drakproxy: first import of drakproxy
-
-2001/06/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): don't check /usr/bin/urpmi, better check
-	/usr/sbin/urpmi.update
-
-	* commands.pm (grep_): add a missing semi-colon
-
-	* share/compssUsers: remove NIS which is handled by DrakX (titi sucks)
-
-2001/06/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/guessmounts, rescue/make_rescue_img, rescue/tree/etc/rc.sysinit,
-	rescue/Makefile: 
-	  - add 'guessmounts' that mimics RH's detecting of partitions when
-	rescue starts
-
-2001/06/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: updated Azeri file
-
-	* share/po/ru.po, share/po/DrakX.pot: updated Russian file
-
-2001/06/10  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/guessmounts: pixelization (tested!)
-
-	* install_any.pm (g_auto_install): more comments in auto_inst.cfg file
-
-2001/06/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/list.i386: rescuept is in /sbin now
-
-	* share/list: rescuept in /sbin now
-
-2001/06/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: don't wait on upping lo interface
-
-	* mdk-stage1/modules.c: fix minor bug detecting when modules are present
-
-	* mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/dietlibc/lib/random.c:
-	i need working random suite for ppp with dietlibc
-
-	* mdk-stage1/stage1.c: exit when exec fails after fork, i don't want two
-	stage1 processes!
-
-2001/06/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pl.po: updated Polish file
-
-2001/06/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (mount): notail in any case
-
-	* tools/i386/netboot/menu.lst.example, tools/i386/netboot/menu.lst,
-	tools/i386/netboot/.cvsignore: menu.lst is now a local file created from
-	the example
-
-	* share/list, rescue/list.i386, rescue/list: switch to perl 5.6.1
-
-	* Makefile: fix
-
-2001/06/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated Russian file
-
-2001/06/01  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: use -FULL postfix for common .c files targetting
-	stage1-full
-
-	* mdk-stage1/stage1.c: minor fix
-
-	* mdk-stage1/newt/textbox.c: don't modify newt code to fix dietlibc bugs,
-	i want to link against glibc too
-
-	* mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/dietlibc/lib/strncat.c:
-	
-	  - have strncat behave the same way as in glibc
-	  - declare that we're using the DIETLIBC in include/stdlib.h, so I can
-	change my mind in "dns.c" to handle broken glibc which is not capable of
-	doing name resolution with a static binary
-
-	* mdk-stage1/dns.c, mdk-stage1/dns.h, mdk-stage1/adsl.c,
-	mdk-stage1/adsl.h, mdk-stage1/nfsmount.c, mdk-stage1/network.c,
-	mdk-stage1/url.c, mdk-stage1/network.h: 
-	  - first draft of adsl support
-	  - get back some code for supporting broken glibc unable to resolve
-	when linked statically
-
-	* mdk-stage1/dietlibc/dietfeatures.h, mdk-stage1/dietlibc/lib/tcflush.c,
-	mdk-stage1/dietlibc/lib/cfgetospeed.c, mdk-stage1/dietlibc/lib/speed.c,
-	mdk-stage1/dietlibc/lib/tcsetattr.c,
-	mdk-stage1/dietlibc/include/termios.h,
-	mdk-stage1/dietlibc/include/netdb.h,
-	mdk-stage1/dietlibc/libshell/glob.c: slight modifs to get ppp and pppoe
-	stuff compile better
-
-2001/05/31  daouda
-
-	* bootlook.pm: add runlevel chooser feature
-
-2001/05/31  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/make_rescue_img: check presence of files from list and list.ARCH
-
-	* Makefile (get_needed_files): exit with error message if files from
-	share/list (and
-	share/list.ARCH) are missing
-
-	* install2.pm: hide step formatPartitions when upgrading
-
-2001/05/30  mbadaire
-
-	* mdk-stage1/stage1.c, mdk-stage1/slang/slmalloc.c,
-	mdk-stage1/slang/Makefile, mdk-stage1/Makefile.common,
-	mdk-stage1/insmod-modutils/obj/Makefile,
-	mdk-stage1/insmod-modutils/Makefile, mdk-stage1/bzlib/Makefile,
-	mdk-stage1/init-libc-headers.h, mdk-stage1/newt/Makefile,
-	mdk-stage1/Makefile, mdk-stage1/insmod-modutils/util/Makefile,
-	mdk-stage1/mar/Makefile, mdk-stage1/newt/windows.c: 
-	  - allow build on ia64
-	  - have CFLAGS centralized in Makefile.common (should help ports such
-	as alpha)
-	  - better looking sub makefiles
-
-2001/05/30  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile.drakxtools (install): ensure pm's in subdirs don't have
-	/use(diagnostics|vars|strict)/
-
-2001/05/29  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: added fix from Michael Brown to handle pipe in queue
-	name for lpr.
-
-2001/05/29  tvignaud
-
-	* share/compssUsers: add NIS client to network clients
-
-2001/05/29  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: added fix from Michael Brown to handle pipe in queue
-	name for lpr.
-
-2001/05/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/newt-frontend.c: use Axalon patch to hide passwords (highly
-	rewritten..)
-
-2001/05/25  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* rescue/list.ppc, bootloader.pm: add hfs support to rescue - PPC, fix
-	bootstrap creation, formatting sequence
-
-	* install_steps_interactive.pm: fix bootstrap information screen back to
-	orig with missing ":" - PPC
-	add hfs support to rescue - PPC, fix bootstrap creation, formatting
-	sequence
-
-2001/05/25  siegel
-
-	* share/po/de.po: updated time
-	moved to UTF-8
-
-2001/05/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-2001/05/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (g_auto_install): autoExitInstall set if not replay (was
-	the opposite)
-
-2001/05/23  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/list: add scd0...
-
-2001/05/22  siegel
-
-	* share/po/de.po: updates
-
-2001/05/21  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* tools/ppc/mkhybrid-1.12b5.4-x86, tools/ppc/mkINSTALLCD: enable creation
-	of PPC boot CD on x86 platform
-
-2001/05/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: 
-	  - better detect when IP is not good
-	  - error_msg when netmask seems invalid
-	  - don't log too much `guessing netmask'
-
-	* mdk-stage1/probing.c: be sure to print pci vendor and id with 4 digits
-	each
-
-2001/05/17  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed parted that ask for confirmation if partition
-	table is not right (MAXDATA
-	for example), this cause parted to ignore warning.
-	added blank space between partition windows and linux to help resolving
-	above case.
-	fixed hole in partitionning (need testing), use fdisk to get disk
-	geometry and
-	create partition that matches cylinder boundaries (no more
-	approximation).
-	make sure to create all partitions including /home.
-
-2001/05/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: add log for modules aliasing of SCSI drivers
-	don't write nonsense code to separate frontend from stage1,
-	but rather, try to do some clever things
-
-	* mdk-stage1/probing.c: unify user notification of network and scsi
-	devices that make load of drivers
-	don't write nonsense code to separate frontend from stage1,
-	but rather, try to do some clever things
-
-	* mdk-stage1/stage1.c, mdk-stage1/frontend.h, mdk-stage1/stage1.h,
-	mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c,
-	mdk-stage1/Makefile, mdk-stage1/dhcp.c, mdk-stage1/newt-frontend.c,
-	mdk-stage1/disk.c, mdk-stage1/network.c: don't write nonsense code to
-	separate frontend from stage1,
-	but rather, try to do some clever things
-
-	* mdk-stage1/frontend-common.c: plop
-
-2001/05/16  dam's  <damien@mandrakesoft.com>
-
-	* pixmaps/bootloader.png, pixmaps/user.png, pixmaps/security.png,
-	pixmaps/rootpasswd.png, pixmaps/harddrive.png, pixmaps/keyboard.png,
-	pixmaps/default.png, pixmaps/X.png, pixmaps/mouse.png,
-	pixmaps/bootdisk.png, pixmaps/services.png: added icons
-
-	* standalone/printerdrake, standalone/keyboarddrake, standalone/drakboot,
-	standalone/draksec, standalone/drakxservices, standalone/drakgw,
-	standalone/XFdrake, standalone/adduserdrake: added icon management
-
-	* my_gtk.pm, interactive.pm: icons management
-
-	* install2.pm: added icons management
-
-	* standalone/draknet: added icon managment
-
-	* pixmaps/printer.png: added icon
-
-2001/05/16  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added support for /var creation, and more specific
-	package selection for server.
-	Include option support by VERSION file.
-
-2001/05/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/HACKING, mdk-stage1/frontend.h,
-	mdk-stage1/TECH-INFOS, mdk-stage1/WHY-DIETLIBC, mdk-stage1/stage1.h,
-	mdk-stage1/stdio-frontend.c, mdk-stage1/Makefile, mdk-stage1/README,
-	mdk-stage1/newt-frontend.c: have a 100% independence between UI stuff
-	and code from stage1
-
-2001/05/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po, share/po/de.po, share/po/DrakX.pot, share/po/tr.po:
-	updated Turkish file
-
-2001/05/16  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile: fix yet again DrakX.pot making
-
-	* partition_table.pm: re-add reiserfs as it should
-	add xfs
-
-2001/05/15  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added missing Aurora, added icewm-light that may be
-	usefull.
-
-2001/05/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: libresolv deprecated in GLIBC
-	have stage1-full with pcmcia also compile with dietlibc, cool!
-
-	* mdk-stage1/network.c: fix guess netmask
-	configure_net_device is only used internally
-
-	* mdk-stage1/modules.c, mdk-stage1/modules.h: better modules handling
-	interface (use of enum rather than guessing single numbers..)
-
-	* mdk-stage1/newt-frontend.c: allow wait_message calls to be multi-lines
-
-	* mdk-stage1/pcmcia/cardmgr.c: have stage1-full with pcmcia also compile
-	with dietlibc, cool!
-	  - build glibc and dietlibc targets
-	  - bzero string buffer before sscanf call (dietlibc implementation)
-	  - verify returns of ioperm so that I can use it in test mode
-
-	* mdk-stage1/dietlibc/include/sys/file.h,
-	mdk-stage1/dietlibc/include/sys/io.h,
-	mdk-stage1/dietlibc/syscalls.s/ioperm.S: have stage1-full with pcmcia
-	also compile with dietlibc, cool!
-
-	* mdk-stage1/stage1.c: a bit of size reduction plus some language change
-	blurk
-
-	* mdk-stage1/WHY-DIETLIBC: advocate dietlibc
-
-	* mdk-stage1/dietlibc/lib/vsscanf.c: import vsscanf fix from author
-
-	* mdk-stage1/disk.c: bzero string buffer before sscanf call, security for
-	dietlibc implementation
-
-	* mdk-stage1/network.h: configure_net_device is only used internally
-
-	* mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/pcmcia_probe.c: 
-	  - build glibc and dietlibc targets
-	  - bzero string buffer before sscanf call (dietlibc implementation)
-	  - verify returns of ioperm so that I can use it in test mode
-
-	* standalone/drakgw: full path for iptables
-
-	* mdk-stage1/probing.c: allow wait_message calls to be multi-lines
-	nicer layout for PCI detection messages
-	better modules handling interface (use of enum rather than guessing
-	single numbers..)
-
-2001/05/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po, share/po/ar.po: Updated Turkish file
-
-	* share/keyboards.tar.bz2: Added north-african keyboard
-
-	* keyboard.pm: added arabic azerty keyboard
-
-2001/05/15  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile: fix messages to i18n extracting
-
-2001/05/14  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* fs.pm: s|mkxfs|mkfs.xfs|;
-
-2001/05/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/nfsmount.c: use new gethostby* interface
-
-	* mdk-stage1/stage1-data/stage1-with-busybox.tar.bz2: add stage1-data
-	which provides the busybox
-
-	* mdk-stage1/network.c: Have the wait_message() with the sleep()
-	  - complies to gethostby functions
-	  - add sleep(2) so that net intf is really up before operation
-	  - more logs
-	  - FTP: don't try to close control connection with data socket, erhm
-	:-(
-	  - debug netmask guessing, with stdio-frontend
-
-	* mdk-stage1/Makefile: i can compile slang and newt with dietlibc now
-	every targets build with dietlibc
-
-	* mdk-stage1/make_boot_img: use busybox for my debugging purpose
-
-	* mdk-stage1/tools.c: no need to poll() for data at beginning of
-	load_ramdisk_fd, it was a fix of another problem (bug with file stdio
-	operations with sockets in dietlibc)
-
-	* mdk-stage1/dietlibc/Makefile: build this new dietlibc
-	import new version of dietlibc
-
-	* mdk-stage1/dns.c, mdk-stage1/dns.h: now use gethostby* functions
-	provided by dietlibc
-
-	* mdk-stage1/url.c: use poll() rather than select(), smaller code size
-
-	* mdk-stage1/stage1.c: we don't use this sucking sash no more
-	we now use `busybox' compiled with the marvellous dietlibc, which
-	provides no less than 73 usefull binaries
-
-	* mdk-stage1/dietlibc/alpha/semop.S, mdk-stage1/dietlibc/lib/sendmsg.c,
-	mdk-stage1/dietlibc/alpha/shmget.S, mdk-stage1/dietlibc/lib/clearerr.c,
-	mdk-stage1/dietlibc/include/sys/ipc.h,
-	mdk-stage1/dietlibc/alpha/sendmsg.S,
-	mdk-stage1/dietlibc/lib/tcgetpgrp.c, mdk-stage1/dietlibc/lib/fwrite.c,
-	mdk-stage1/dietlibc/sparc/__testandset.S,
-	mdk-stage1/dietlibc/syscalls.s/open.S,
-	mdk-stage1/dietlibc/alpha/semget.S, mdk-stage1/dietlibc/dietstdarg.h,
-	mdk-stage1/dietlibc/syscalls.s/sched_get_priority_max.S,
-	mdk-stage1/dietlibc/lib/nop.c, mdk-stage1/dietlibc/start.h,
-	mdk-stage1/dietlibc/include/sys/syscall.h,
-	mdk-stage1/dietlibc/alpha/accept.S, mdk-stage1/dietlibc/lib/sigjmp.c,
-	mdk-stage1/dietlibc/syscalls.s/ptrace.s,
-	mdk-stage1/dietlibc/lib/isprint.c,
-	mdk-stage1/dietlibc/syscalls.s/dietstat.S,
-	mdk-stage1/dietlibc/alpha/shutdown.S, mdk-stage1/dietlibc/lib/sendto.c,
-	mdk-stage1/dietlibc/sparc/shmat.c, mdk-stage1/dietlibc/include/time.h,
-	mdk-stage1/dietlibc/lib/stat_convert.c, mdk-stage1/dietlibc/lib/send.c,
-	mdk-stage1/dietlibc/lib/isxdigit.c, mdk-stage1/dietlibc/alpha/waitpid.S,
-	mdk-stage1/dietlibc/lib/atexit.c, mdk-stage1/dietlibc/lib/readdir.c,
-	mdk-stage1/dietlibc/include/sys/sem.h,
-	mdk-stage1/dietlibc/syscalls.s/query_module.S,
-	mdk-stage1/dietlibc/lib/strchr.c,
-	mdk-stage1/dietlibc/syscalls.s/dietfstat64.S,
-	mdk-stage1/dietlibc/syscalls.s/lstat64.S,
-	mdk-stage1/dietlibc/i386/setjmp.S, mdk-stage1/dietlibc/lib/alloc.c,
-	mdk-stage1/dietlibc/lib/perror.c,
-	mdk-stage1/dietlibc/include/sys/socket.h,
-	mdk-stage1/dietlibc/lib/creat64.c, mdk-stage1/dietlibc/lib/closedir.c,
-	mdk-stage1/dietlibc/sparc/pipe.S, mdk-stage1/dietlibc/lib/msgrcv.c,
-	mdk-stage1/dietlibc/include/utmp.h,
-	mdk-stage1/dietlibc/syscalls.s/sendfile.S,
-	mdk-stage1/dietlibc/syscalls.s/nice.S,
-	mdk-stage1/dietlibc/syscalls.s/sigprocmask.S,
-	mdk-stage1/dietlibc/syscalls.s/select.S,
-	mdk-stage1/dietlibc/include/sys/mtio.h,
-	mdk-stage1/dietlibc/i386/strchr.S, mdk-stage1/dietlibc/alpha/divl.S,
-	mdk-stage1/dietlibc/syscalls.s/sched_rr_get_interval.S,
-	mdk-stage1/dietlibc/lib/__telldir.c,
-	mdk-stage1/dietlibc/i386/__testandset.S,
-	mdk-stage1/dietlibc/lib/remove.c,
-	mdk-stage1/dietlibc/syscalls.s/sched_get_priority_min.S,
-	mdk-stage1/dietlibc/lib/fputc.c, mdk-stage1/dietlibc/lib/msgctl.c,
-	mdk-stage1/dietlibc/alpha/clone.S, mdk-stage1/dietlibc/lib/connect.c,
-	mdk-stage1/dietlibc/include/sys/un.h,
-	mdk-stage1/dietlibc/alpha/connect.S,
-	mdk-stage1/dietlibc/include/termios.h,
-	mdk-stage1/dietlibc/lib/sigfillset.c,
-	mdk-stage1/dietlibc/lib/sigismember.c,
-	mdk-stage1/dietlibc/syscalls.s/dietstat64.S,
-	mdk-stage1/dietlibc/i386/start.S, mdk-stage1/dietlibc/lib/shmget.c,
-	mdk-stage1/dietlibc/lib/strtok.c, mdk-stage1/dietlibc/lib/fclose.c,
-	mdk-stage1/dietlibc/lib/tcsetpgrp.c,
-	mdk-stage1/dietlibc/sparc/Makefile.add,
-	mdk-stage1/dietlibc/include/sys/shm.h, mdk-stage1/dietlibc/alpha/send.S,
-	mdk-stage1/dietlibc/i386/__longjmp.S, mdk-stage1/dietlibc/lib/recvmsg.c,
-	mdk-stage1/dietlibc/include/inttypes.h,
-	mdk-stage1/dietlibc/syscalls.s/sched_getscheduler.S,
-	mdk-stage1/dietlibc/lib/semget.c, mdk-stage1/dietlibc/lib/open64.c,
-	mdk-stage1/dietlibc/alpha/recvmsg.S,
-	mdk-stage1/dietlibc/syscalls.s/fork.S,
-	mdk-stage1/dietlibc/lib/strcasecmp.c, mdk-stage1/dietlibc/lib/htonl.c,
-	mdk-stage1/dietlibc/lib/accept.c, mdk-stage1/dietlibc/alpha/shmat.S,
-	mdk-stage1/dietlibc/include/features.h,
-	mdk-stage1/dietlibc/include/syslog.h, mdk-stage1/dietlibc/lib/isascii.c,
-	mdk-stage1/dietlibc/syscalls.s/writev.S,
-	mdk-stage1/dietlibc/lib/fputs.c,
-	mdk-stage1/dietlibc/alpha/sigprocmask.S,
-	mdk-stage1/dietlibc/lib/ntohs.c, mdk-stage1/dietlibc/include/sys/uio.h,
-	mdk-stage1/dietlibc/syscalls.s/nanosleep.S,
-	mdk-stage1/dietlibc/syscalls.s/creat.S,
-	mdk-stage1/dietlibc/include/sys/sysinfo.h,
-	mdk-stage1/dietlibc/lib/atof.c, mdk-stage1/dietlibc/alpha/msgsnd.S,
-	mdk-stage1/dietlibc/lib/vsprintf.c, mdk-stage1/dietlibc/lib/toupper.c,
-	mdk-stage1/dietlibc/lib/strlcpy.3, mdk-stage1/dietlibc/lib/sigaddset.c,
-	mdk-stage1/dietlibc/i386/select.S, mdk-stage1/dietlibc/i386/unified.S,
-	mdk-stage1/dietlibc/include/dirent.h,
-	mdk-stage1/dietlibc/include/getopt.h, mdk-stage1/dietlibc/lib/seekdir.c,
-	mdk-stage1/dietlibc/include/net/route.h,
-	mdk-stage1/dietlibc/syscalls.s/exit.S,
-	mdk-stage1/dietlibc/include/pthread.h,
-	mdk-stage1/dietlibc/lib/sprintf.c, mdk-stage1/dietlibc/alpha/msgget.S,
-	mdk-stage1/dietlibc/include/limits.h, mdk-stage1/dietlibc/lib/qsort.c,
-	mdk-stage1/dietlibc/lib/execvp.c,
-	mdk-stage1/dietlibc/syscalls.s/__reboot.S,
-	mdk-stage1/dietlibc/lib/stdin.c,
-	mdk-stage1/dietlibc/syscalls.s/getitimer.S,
-	mdk-stage1/dietlibc/include/grp.h, mdk-stage1/dietlibc/lib/usleep.c,
-	mdk-stage1/dietlibc/lib/lstat.c, mdk-stage1/dietlibc/sparc/setjmp.S,
-	mdk-stage1/dietlibc/sparc/fork.S,
-	mdk-stage1/dietlibc/syscalls.s/__pread.S,
-	mdk-stage1/dietlibc/include/sys/poll.h,
-	mdk-stage1/dietlibc/syscalls.s/personality.S,
-	mdk-stage1/dietlibc/lib/lseek64.c, mdk-stage1/dietlibc/include/setjmp.h,
-	mdk-stage1/dietlibc/lib/recv.c, mdk-stage1/dietlibc/include/string.h,
-	mdk-stage1/dietlibc/include/sys/time.h, mdk-stage1/dietlibc/lib/fstat.c,
-	mdk-stage1/dietlibc/lib/memcmp.c, mdk-stage1/dietlibc/lib/isupper.c,
-	mdk-stage1/dietlibc/include/sys/param.h,
-	mdk-stage1/dietlibc/syscalls.s/__getpagesize.S,
-	mdk-stage1/dietlibc/lib/exec_lib.c, mdk-stage1/dietlibc/alpha/shmdt.S,
-	mdk-stage1/dietlibc/include/dlfcn.h, mdk-stage1/dietlibc/lib/isdigit.c,
-	mdk-stage1/dietlibc/lib/fdopen.c, mdk-stage1/dietlibc/lib/exec_lib.h,
-	mdk-stage1/dietlibc/lib/__lxstat.c, mdk-stage1/dietlibc/alpha/remq.S,
-	mdk-stage1/dietlibc/include/sys/kd.h,
-	mdk-stage1/dietlibc/syscalls.s/read.S, mdk-stage1/dietlibc/lib/fopen.c,
-	mdk-stage1/dietlibc/syscalls.s/sched_yield.S,
-	mdk-stage1/dietlibc/include/sys/mman.h,
-	mdk-stage1/dietlibc/lib/__readdir.c,
-	mdk-stage1/dietlibc/lib/cfgetospeed.c,
-	mdk-stage1/dietlibc/lib/__dtostr.c, mdk-stage1/dietlibc/lib/execv.c,
-	mdk-stage1/dietlibc/alpha/reml.S,
-	mdk-stage1/dietlibc/syscalls.s/fcntl.S,
-	mdk-stage1/dietlibc/include/errno.h, mdk-stage1/dietlibc/lib/ferror.c,
-	mdk-stage1/dietlibc/syscalls.s/ipc.S,
-	mdk-stage1/dietlibc/syscalls.s/mlockall.S,
-	mdk-stage1/dietlibc/lib/fgetc.c, mdk-stage1/dietlibc/lib/strtoull.c,
-	mdk-stage1/dietlibc/include/sys/msg.h,
-	mdk-stage1/dietlibc/syscalls.s/sigsuspend.S,
-	mdk-stage1/dietlibc/lib/isgraph.c, mdk-stage1/dietlibc/lib/vsscanf.c,
-	mdk-stage1/dietlibc/lib/ftell.c, mdk-stage1/dietlibc/include/unistd.h,
-	mdk-stage1/dietlibc/lib/msgsnd.c, mdk-stage1/dietlibc/lib/semop.c,
-	mdk-stage1/dietlibc/include/net/if_arp.h,
-	mdk-stage1/dietlibc/lib/execlp.c,
-	mdk-stage1/dietlibc/syscalls.s/stat64.S,
-	mdk-stage1/dietlibc/dietfeatures.h, mdk-stage1/dietlibc/dietstdio.h,
-	mdk-stage1/dietlibc/lib/feof.c, mdk-stage1/dietlibc/lib/opendir.c,
-	mdk-stage1/dietlibc/syscalls.s/fstat64.S,
-	mdk-stage1/dietlibc/syscalls.s/sched_setparam.S,
-	mdk-stage1/dietlibc/include/sys/reboot.h,
-	mdk-stage1/dietlibc/lib/sigdelset.c, mdk-stage1/dietlibc/lib/execl.c,
-	mdk-stage1/dietlibc/include/sys/sendfile.h,
-	mdk-stage1/dietlibc/include/sys/syslog.h,
-	mdk-stage1/dietlibc/syscalls.s/iopl.S, mdk-stage1/dietlibc/lib/msgget.c,
-	mdk-stage1/dietlibc/syscalls.s/sched_getparam.S,
-	mdk-stage1/dietlibc/lib/vsnprintf.c,
-	mdk-stage1/dietlibc/include/signal.h,
-	mdk-stage1/dietlibc/syscalls.s/pause.S,
-	mdk-stage1/dietlibc/include/arpa/inet.h,
-	mdk-stage1/dietlibc/include/sys/wait.h,
-	mdk-stage1/dietlibc/alpha/time.S, mdk-stage1/dietlibc/lib/ttyname.c,
-	mdk-stage1/dietlibc/lib/__lstat64.c, mdk-stage1/dietlibc/lib/__stat64.c,
-	mdk-stage1/dietlibc/alpha/recv.S, mdk-stage1/dietlibc/lib/fgets.c,
-	mdk-stage1/dietlibc/lib/strncat.c, mdk-stage1/dietlibc/lib/__lltostr.c,
-	mdk-stage1/dietlibc/lib/__ltostr.c,
-	mdk-stage1/dietlibc/sparc/__longjmp.S, mdk-stage1/dietlibc/lib/puts.c,
-	mdk-stage1/dietlibc/lib/rand.c, mdk-stage1/dietlibc/syscalls.s/fsync.S,
-	mdk-stage1/dietlibc/include/fnmatch.h, mdk-stage1/dietlibc/lib/fflush.c,
-	mdk-stage1/dietlibc/lib/htons.c,
-	mdk-stage1/dietlibc/syscalls.s/sigaltstack.S,
-	mdk-stage1/dietlibc/include/sys/resource.h,
-	mdk-stage1/dietlibc/lib/__stat64_cvt.c,
-	mdk-stage1/dietlibc/lib/localtime.c,
-	mdk-stage1/dietlibc/alpha/seteuid.c,
-	mdk-stage1/dietlibc/syscalls.s/stime.S,
-	mdk-stage1/dietlibc/include/resolv.h, mdk-stage1/dietlibc/lib/__xstat.c,
-	mdk-stage1/dietlibc/ppc/Makefile.add,
-	mdk-stage1/dietlibc/sparc/unified.S, mdk-stage1/dietlibc/lib/bsearch.c,
-	mdk-stage1/dietlibc/include/net/if.h,
-	mdk-stage1/dietlibc/include/shadow.h,
-	mdk-stage1/dietlibc/lib/__rewinddir.c,
-	mdk-stage1/dietlibc/include/daemon.h, mdk-stage1/dietlibc/lib/mkfifo.c,
-	mdk-stage1/dietlibc/include/paths.h, mdk-stage1/dietlibc/include/pwd.h,
-	mdk-stage1/dietlibc/lib/strrchr.c, mdk-stage1/dietlibc/lib/__seekdir.c,
-	mdk-stage1/dietlibc/syscalls.h, mdk-stage1/dietlibc/alpha/shmctl.S,
-	mdk-stage1/dietlibc/lib/fdglue.c, mdk-stage1/dietlibc/lib/fseek.c,
-	mdk-stage1/dietlibc/include/regex.h,
-	mdk-stage1/dietlibc/include/sys/ptrace.h,
-	mdk-stage1/dietlibc/lib/tcdrain.c,
-	mdk-stage1/dietlibc/syscalls.s/lstat.S,
-	mdk-stage1/dietlibc/alpha/semctl.S, mdk-stage1/dietlibc/lib/recvfrom.c,
-	mdk-stage1/dietlibc/lib/random.c,
-	mdk-stage1/dietlibc/syscalls.s/times.S,
-	mdk-stage1/dietlibc/lib/getpgrp.c, mdk-stage1/dietlibc/lib/cfmakeraw.c,
-	mdk-stage1/dietlibc/lib/stat.c, mdk-stage1/dietlibc/syscalls.s/write.S,
-	mdk-stage1/dietlibc/syscalls.s/dietlstat64.S,
-	mdk-stage1/dietlibc/ppc/__testandset.S,
-	mdk-stage1/dietlibc/include/mntent.h,
-	mdk-stage1/dietlibc/include/sys/file.h,
-	mdk-stage1/dietlibc/syscalls.s/fstat.S,
-	mdk-stage1/dietlibc/syscalls.s/llseek.S,
-	mdk-stage1/dietlibc/lib/strsep.c,
-	mdk-stage1/dietlibc/include/sys/stat.h,
-	mdk-stage1/dietlibc/syscalls.s/munlockall.S,
-	mdk-stage1/dietlibc/syscalls.s/setpriority.S,
-	mdk-stage1/dietlibc/include/assert.h,
-	mdk-stage1/dietlibc/include/strings.h,
-	mdk-stage1/dietlibc/include/alloca.h, mdk-stage1/dietlibc/lib/gmtime.c,
-	mdk-stage1/dietlibc/lib/shmat.c, mdk-stage1/dietlibc/lib/__isnan.c,
-	mdk-stage1/dietlibc/ppc/__longjmp.S,
-	mdk-stage1/dietlibc/lib/__closedir.c,
-	mdk-stage1/dietlibc/include/sys/signal.h,
-	mdk-stage1/dietlibc/lib/rewinddir.c, mdk-stage1/dietlibc/lib/stdout.c,
-	mdk-stage1/dietlibc/lib/vfprintf.c, mdk-stage1/dietlibc/.cvsignore,
-	mdk-stage1/dietlibc/lib/telldir.c, mdk-stage1/dietlibc/include/glob.h,
-	mdk-stage1/dietlibc/lib/tm_conv.c,
-	mdk-stage1/dietlibc/syscalls.s/reboot.S,
-	mdk-stage1/dietlibc/syscalls.s/sched_setscheduler.S,
-	mdk-stage1/dietlibc/syscalls.s/umount2.S,
-	mdk-stage1/dietlibc/syscalls.s/readv.S,
-	mdk-stage1/dietlibc/lib/__fxstat.c,
-	mdk-stage1/dietlibc/include/sys/select.h,
-	mdk-stage1/dietlibc/syscalls.s/syslog.S,
-	mdk-stage1/dietlibc/syscalls.s/sysinfo.S,
-	mdk-stage1/dietlibc/lib/fprintf.c,
-	mdk-stage1/dietlibc/include/sys/cdefs.h, mdk-stage1/dietlibc/README,
-	mdk-stage1/dietlibc/lib/fread.c, mdk-stage1/dietlibc/lib/getpwnam.c,
-	mdk-stage1/dietlibc/syscalls.s/getcwd.S,
-	mdk-stage1/dietlibc/lib/getservent.c, mdk-stage1/dietlibc/lib/tolower.c,
-	mdk-stage1/dietlibc/diet.c, mdk-stage1/dietlibc/alpha/recvfrom.S,
-	mdk-stage1/dietlibc/include/elf.h, mdk-stage1/dietlibc/alpha/sendto.S,
-	mdk-stage1/dietlibc/lib/fileno.c, mdk-stage1/dietlibc/i386/clone.S,
-	mdk-stage1/dietlibc/lib/__opendir.c,
-	mdk-stage1/dietlibc/include/sched.h, mdk-stage1/dietlibc/alpha/__time.c,
-	mdk-stage1/dietlibc/lib/ispunct.c, mdk-stage1/dietlibc/lib/printf.c,
-	mdk-stage1/dietlibc/lib/strtod.c, mdk-stage1/dietlibc/lib/strncasecmp.c,
-	mdk-stage1/dietlibc/lib/__getcwd.c,
-	mdk-stage1/dietlibc/include/netinet/in.h,
-	mdk-stage1/dietlibc/lib/shmctl.c,
-	mdk-stage1/dietlibc/syscalls.s/dietlstat.S,
-	mdk-stage1/dietlibc/include/arpa/nameser.h,
-	mdk-stage1/dietlibc/lib/assert_fail.c, mdk-stage1/dietlibc/lib/semctl.c,
-	mdk-stage1/dietlibc/lib/shmdt.c, mdk-stage1/dietlibc/lib/shutdown.c,
-	mdk-stage1/dietlibc/lib/setpgrp.c, mdk-stage1/dietlibc/alpha/msgrcv.S,
-	mdk-stage1/dietlibc/lib/stderr.c,
-	mdk-stage1/dietlibc/syscalls.s/close.S,
-	mdk-stage1/dietlibc/syscalls.s/dietfstat.S,
-	mdk-stage1/dietlibc/include/locale.h,
-	mdk-stage1/dietlibc/syscalls.s/getpriority.S,
-	mdk-stage1/dietlibc/lib/__fstat64.c, mdk-stage1/dietlibc/lib/isalpha.c,
-	mdk-stage1/dietlibc/lib/reboot.c, mdk-stage1/dietlibc/lib/isspace.c,
-	mdk-stage1/dietlibc/include/sys/mount.h,
-	mdk-stage1/dietlibc/lib/creat.c, mdk-stage1/dietlibc/syscalls.s/lseek.S,
-	mdk-stage1/dietlibc/sparc/clone.S, mdk-stage1/dietlibc/dietwarning.h,
-	mdk-stage1/dietlibc/lib/islower.c,
-	mdk-stage1/dietlibc/alpha/Makefile.add, mdk-stage1/dietlibc/lib/abort.c,
-	mdk-stage1/dietlibc/alpha/msgctl.S, mdk-stage1/dietlibc/lib/isalnum.c,
-	mdk-stage1/dietlibc/include/ctype.h,
-	mdk-stage1/dietlibc/include/netdb.h,
-	mdk-stage1/dietlibc/include/memory.h, mdk-stage1/dietlibc/lib/iscntrl.c,
-	mdk-stage1/dietlibc/i386/Makefile.add, mdk-stage1/dietlibc/lib/getopt.c,
-	mdk-stage1/dietlibc/syscalls.s/waitpid.S,
-	mdk-stage1/dietlibc/lib/strtoul.c,
-	mdk-stage1/dietlibc/syscalls.s/stat.S,
-	mdk-stage1/dietlibc/syscalls.s/sysctl.S: import new version of dietlibc
-
-	* mdk-stage1/insmod-busybox/busybox.h: fix conflicts with dietlibc headers
-
-	* mdk-stage1/dietlibc/include/stdio.h,
-	mdk-stage1/dietlibc/include/stdlib.h,
-	mdk-stage1/dietlibc/include/math.h,
-	mdk-stage1/dietlibc/include/sys/times.h: have slang and newt compile
-	with dietlibc
-	import new version of dietlibc
-
-	* mdk-stage1/Makefile.common: new dietlibc binaries location
-
-	* mdk-stage1/newt-frontend.c: i can compile slang and newt with dietlibc
-	now
-
-	* mdk-stage1/dietlibc/lib/abs.c: have slang and newt compile with dietlibc
-
-	* mdk-stage1/dhcp.c: Have the wait_message() with the sleep()
-	  - add a sleep(2) after ioctl ifupping so that further operation can
-	work normally
-	  - more logs
-
-2001/05/14  kjx
-
-	* share/po/zh_CN.GB2312.po: process untranslated
-
-2001/05/14  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, fsedit.pm, partition_table.pm, install_any.pm: basic xfs handling
-
-2001/05/11  François Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: fixed missing package which may be selected on
-	hardware during real install.
-
-	* rescue/tree/etc/oem: added support to change boot entries when invoking
-	oem script.
-	fixed missing SCSI support and driver module loading.
-	fixed missing speficic packages not installed on HW detected.
-
-2001/05/08  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: VBox -> HBox in Embedded mode
-
-	* standalone/mousedrake: code cleaned and debugged
-	added mouse test. Ugly
-
-2001/05/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stdio-frontend.c: fix minor stuff
-	re-include correct layout for [] choices, in a smaller way than before
-
-	* mdk-stage1/tools.c: minor fix
-	needs to poll() for available data before loading ramdisk because ftp
-	transfers would fail in some situations
-
-	* mdk-stage1/init.c: new maxim
-
-	* mdk-stage1/config-stage1.h: adjust COMPRESSION_RATIO so that last star
-	is printed when last blocks of file are read
-
-	* mdk-stage1/dhcp.c: use poll() rather than select() to win some bytesCVS:
-	----------------------------------------------------------------------
-
-2001/05/08  siegel
-
-	* share/po/de.po: fixed plenty ugly typos
-
-2001/05/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po: updated Brazilian file
-
-2001/05/07  yduret
-
-	* docs/README.devel: fix one typo
-
-	* any.pm, bootloader.pm: updated install_lilo() according to new lilo
-	package
-	(/boot/lilo-{menu,graphic,text})
-
-2001/05/06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad output and bad adsl script
-
-2001/05/06  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install2.pm: workaround for msec hang on PPC
-
-2001/05/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: KDE+SOUND -> 4 xmms-arts
-
-2001/05/04  tvignaud
-
-	* mdk-stage1/mar/mar-extract-only.c: text size micro-opt
-
-2001/05/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: KDE+SOUND -> 4 xmms-arts
-
-2001/05/04  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* c/smp.c, keyboard.pm, Xconfigurator.pm: force XF4 in expert too for PPC,
-	don't run xmodmap, PPC SMP routine placeholder
-
-2001/05/04  tvignaud
-
-	* mdk-stage1/mar/mar-extract-only.c: text size micro-opt
-
-2001/04/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stdio-frontend.c: nicer layout for progressbar and
-	statusreport, when update_progression
-	Provide some description of the drivers
-
-	* docs/HACKING: fix
-	pserver -> ext
-
-	* mdk-stage1/tools.c, mdk-stage1/Makefile, mdk-stage1/tools.h,
-	mdk-stage1/newt-frontend.c, mdk-stage1/modules_descr.h,
-	mdk-stage1/modules.c: Provide some description of the drivers
-
-2001/04/30  Pixel  <pixel@mandrakesoft.com>
-
-	* docs/README: s/gi.tar.bz2/DrakX-*.src.rpm/
-
-	* docs/advocacy: fuck'em all
-
-2001/04/26  François Pons  <fpons@mandrakesoft.com>
-
-	* docs/README.devel, docs/README: added some more comments for DrakX code
-	source and usage.
-
-2001/04/25  François Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: fixed use of VERSION file to find language.
-	prepare a oem disk to be used by moving all files that will not be
-	installed by oem (oem-master disk preparation).
-
-	* rescue/tree/etc/closurepkgs, rescue/tree/etc/part_and_bootloader: fixed
-	usage of free space on disk, added NVIDIA packages to install.
-
-	* rescue/tree/etc/oem-server: added missing VERSION file.
-	fixed usage of free space on disk, added NVIDIA packages to install.
-
-	* rescue/tree/etc/oem: added missing autologin package.
-	added option to enable oem mode.
-	added missing VERSION file.
-	fixed usage of free space on disk, added NVIDIA packages to install.
-
-2001/04/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: version is labelled "cooker"
-
-2001/04/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/serial_probe/serial.c, tools/serial_probe/serial_probe.c:
-	integrate fg's fixes for includes
-
-2001/04/19  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* rescue/list.sparc, rescue/list.i386, rescue/list.ppc, rescue/list.alpha,
-	rescue/list: move /sbin/sfdisk to list.arch, update both list.ppc
-
-2001/04/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: fix bug that trashes the network config of stage1
-	during stage2, when no DNS is provided
-
-2001/04/18  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: last corrections
-
-	* standalone/draknet, netconnect.pm: last corrections
-	corrected internet connection test, and parameters editing
-
-	* install_steps_gtk.pm: corrected cursor on details
-
-2001/04/18  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: * put am-utils and autofs in NETWORKING_FILE
-	* drakprofile in level 1
-	* swapped tkinter and python-devel
-	* vnc-server in NETWORKING_REMOTE_ACCESS_SERVER
-	* vnc-SVGALIB in level 2
-
-2001/04/17  dam's  <damien@mandrakesoft.com>
-
-	* standalone/mousedrake: fixed embedded
-
-	* bootlook.pm: chmoded autologin
-
-2001/04/17  François Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: restored grub as everything seems fine.
-
-	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
-	swap gap.
-	make sure kernel will be selected.
-
-	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
-	make sure kernel is selected.
-
-	* install_steps_interactive.pm: fixed missing mouse update in summary.
-
-2001/04/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: fix 75dpi-fonts bug with MAKEDEV
-
-2001/04/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* standalone/draknet: fixed typo
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated Basque file
-
-2001/04/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): better ensure
-	'broadcast' insteaf of overriding
-	(setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
-	means no NIS
-
-	* any.pm (setupBootloader): remove a warning
-
-2001/04/17  warly
-
-	* share/rpmsrate: put MAKEDEV at end of line
-
-2001/04/17  dam's  <damien@mandrakesoft.com>
-
-	* standalone/mousedrake: fixed embedded
-
-	* bootlook.pm: chmoded autologin
-
-2001/04/17  François Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: restored grub as everything seems fine.
-
-	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
-	make sure kernel is selected.
-	fixed parted problem.
-
-	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
-	swap gap.
-	make sure kernel will be selected.
-
-	* install_steps_interactive.pm: fixed missing mouse update in summary.
-
-2001/04/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated Basque file
-
-2001/04/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): better ensure
-	'broadcast' insteaf of overriding
-	(setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
-	means no NIS
-
-	* any.pm (setupBootloader): remove a warning
-
-2001/04/17  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: chmoded autologin
-
-2001/04/17  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
-	make sure kernel is selected.
-	fixed parted problem.
-
-	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
-	swap gap.
-	make sure kernel will be selected.
-
-2001/04/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): better ensure
-	'broadcast' insteaf of overriding
-	(setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
-	means no NIS
-
-	* any.pm (setupBootloader): remove a warning
-
-2001/04/17  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: chmoded autologin
-
-2001/04/17  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
-	make sure kernel is selected.
-	fixed parted problem.
-
-	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
-	swap gap.
-	make sure kernel will be selected.
-
-2001/04/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): set NIS to broadcast
-	when NIS asked. Empty NIS still means no NIS
-
-	* any.pm (setupBootloader): remove a warning
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* any.pm: removed Grub if Embedded
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: minor bug.
-
-	* any.pm: removed Grub if Embedded
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: updated
-	updated
-
-	* network.pm: dhcpd -> dhcpcd
-
-	* Xconfigurator.pm: added nice monitor.png
-
-	* netconnect.pm: minor bug.
-	dhcpd -> dhcpcd
-
-	* standalone/draknet: updated
-
-	* pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
-	pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
-	pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
-	pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
-	pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
-	pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
-	pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
-	removed for readd in kb
-
-	* my_gtk.pm: corrected typo
-	added grey fix for contreol-center
-
-2001/04/16  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added missing rio500 in closure.
-	finally fixed menu by generating /etc/rpm/macros file.
-	added missing LF.
-	now fixed menu problems.
-	try another fix for RPM_INSTALL_LANG as first fr_FR:fr instead of
-	fr:fr_FR.
-	really disable server.
-	maybe fixed RPM_INSTALL_LANG (from "fr" to "fr:fr_FR" for french).
-	fixed to avoid nasty message in wrong places.
-	moved warning message around.
-	fixed wrong LOCALES"...".
-	fixed lang weirdness, fixed minimal size of / partition to be more
-	confortable,
-	fixed default language for starting DrakX after.
-
-	* Xconfig.pm: fixed standalone error for wacom weirdness.
-	fixed HASH() in /etc/X11/XF86Config*.
-
-	* fs.pm: restored not neccessary to load reiserfs for formating.
-	loading reiserfs module before formatting.
-
-2001/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
-	pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
-	XFdrake
-
-	* mdk-stage1/TECH-INFOS: update doc
-
-	* share/po/fr.po: fix minor thing
-
-2001/04/16  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssUsers: remove BURNER from Utilities
-
-2001/04/16  warly
-
-	* share/rpmsrate: lower portsentry
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: added nice monitor.png
-
-	* standalone/net_monitor: updated
-
-	* pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
-	pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
-	pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
-	pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
-	pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
-	pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
-	pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
-	removed for readd in kb
-
-	* my_gtk.pm: corrected typo
-	added grey fix for contreol-center
-
-2001/04/16  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfig.pm: fixed standalone error for wacom weirdness.
-	fixed HASH() in /etc/X11/XF86Config*.
-
-	* rescue/tree/etc/oem: maybe fixed RPM_INSTALL_LANG (from "fr" to
-	"fr:fr_FR" for french).
-	fixed to avoid nasty message in wrong places.
-	moved warning message around.
-	fixed wrong LOCALES"...".
-	fixed lang weirdness, fixed minimal size of / partition to be more
-	confortable,
-	fixed default language for starting DrakX after.
-
-2001/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
-	pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
-	XFdrake
-
-2001/04/16  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssUsers: remove BURNER from Utilities
-
-2001/04/16  warly
-
-	* share/rpmsrate: lower portsentry
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: bugfix
-	added update thread
-	corrected bad install package.
-	updated expert mode
-
-	* network.pm, install_steps.pm: corrected bad install package.
-
-	* Xconfigurator.pm: added nice monitor.png
-
-	* tinyfirewall.pm: corrected package installation
-
-	* standalone/net_monitor: updated
-
-	* pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
-	pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
-	pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
-	pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
-	pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
-	pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
-	pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
-	removed for readd in kb
-
-	* my_gtk.pm: corrected typo
-	added grey fix for contreol-center
-
-	* netconnect.pm: debug
-	corrected bad install package.
-
-2001/04/16  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfig.pm: fixed standalone error for wacom weirdness.
-	fixed HASH() in /etc/X11/XF86Config*.
-
-	* rescue/tree/etc/oem: maybe fixed RPM_INSTALL_LANG (from "fr" to
-	"fr:fr_FR" for french).
-	fixed to avoid nasty message in wrong places.
-	moved warning message around.
-	fixed wrong LOCALES"...".
-	fixed lang weirdness, fixed minimal size of / partition to be more
-	confortable,
-	fixed default language for starting DrakX after.
-
-2001/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
-	pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
-	XFdrake
-
-2001/04/16  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssUsers: remove BURNER from Utilities
-
-	* install_any.pm (g_auto_install): do not take 'mkbootdisk'
-
-2001/04/16  warly
-
-	* share/rpmsrate: lower portsentry
-
-2001/04/15  fabman
-
-	* share/po/es.po: updates
-
-2001/04/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix minor typo
-
-2001/04/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/gl.po: updated Galician file
-
-2001/04/15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (reallyChooseGroups): translate path (eg:
-	Workstation, Server) to make gg happy
-
-2001/04/15  fabman
-
-	* share/po/es.po: updates
-
-2001/04/15  fcrozat
-
-	* share/rpmsrate: Add mozilla-mail and mozilla-irc to correct categories
-
-2001/04/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix minor typo
-
-2001/04/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po, share/po/ko.po: Updated Swedish and Korean files
-
-2001/04/15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (reallyChooseGroups): translate path (eg:
-	Workstation, Server) to make gg happy
-
-	* printerdrake.pm (main): restore the "Ok" button for the queues
-	manipulation
-
-	* any.pm (write_passwd_user): fix use of local
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): add an eval
-	around "require log" to keep perl from going totally mad (getting things
-	like v18.843.482 required--this is only v5.6.0)
-
-2001/04/15  yduret
-
-	* bootlook.pm: bug fix: if cancel pressed in lilo/grub choice => return to
-	mcc normally
-	fix layout & size
-
-2001/04/14  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected isdn detect display
-
-	* standalone/net_monitor, standalone/draknet: wait 10 sec, instead of 7
-
-2001/04/14  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: changed priority level from 2 to 4 for rate
-	selection of packages.
-
-	* pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.
-
-2001/04/14  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (naughtyServers): add apache
-
-	* install_gtk.pm (createXconf): ensure the mouse device is created (mainly
-	for auto_inst)
-
-	* install_steps_interactive.pm (exitInstall): fix bad i18n of Replay
-	button (thx2submarine)
-
-2001/04/14  warly
-
-	* share/rpmsrate: lower viavoicemenu to 1 to avoid error message for
-	powerpack boxes without ViaVoice
-
-2001/04/14  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: changed priority level from 2 to 4 for rate
-	selection of packages.
-
-	* pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.
-
-2001/04/14  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
-	test)
-
-	* Xconfigurator.pm (use vars): fix stew sux
-	(testFinalConfig): nicer stderr handling
-
-	* interactive_gtk.pm, interactive_newt.pm (exit): fix the exit code
-
-2001/04/14  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed to gzip synthesis file.
-	safe guard generation of synthesis file.
-	fixed umask on urpmi list file and generate synthesis file for each
-	hdlist.
-
-	* pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.
-
-2001/04/14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (configureX): fix link /etc/gtk (to
-	/mnt/etc/gtk) instead of /etc/gtkrc
-
-	* any.pm (autologin): spurious messages of chksession  -> dave nul
-
-	* interactive_newt.pm (exit): fix the exit code
-	(wait_message_endW): don't log "none stacked wait-messages" (as a lot of
-	them exist...)
-	(waitbox): remove spurious '0' in wait_messages
-
-	* lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
-	test)
-
-	* Xconfigurator.pm (use vars): fix stew sux
-	(testFinalConfig): nicer stderr handling
-
-	* interactive_gtk.pm (exit): fix the exit code
-
-2001/04/14  warly
-
-	* share/compssUsers, share/list, share/rpmsrate: add icons in compssUser
-	and list
-
-2001/04/14  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed to gzip synthesis file.
-	safe guard generation of synthesis file.
-	fixed umask on urpmi list file and generate synthesis file for each
-	hdlist.
-
-2001/04/14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (configureX): fix link /etc/gtk (to
-	/mnt/etc/gtk) instead of /etc/gtkrc
-
-	* any.pm (autologin): spurious messages of chksession  -> dave nul
-
-	* interactive_newt.pm (exit): fix the exit code
-	(wait_message_endW): don't log "none stacked wait-messages" (as a lot of
-	them exist...)
-	(waitbox): remove spurious '0' in wait_messages
-
-	* lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
-	test)
-
-	* Xconfigurator.pm (use vars): fix stew sux
-	(testFinalConfig): nicer stderr handling
-
-	* interactive_gtk.pm (exit): fix the exit code
-
-2001/04/14  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm, mouse.pm, Xconfigurator.pm: updates to X, mouse
-	setup for PPC
-
-2001/04/14  warly
-
-	* share/compssUsers, share/list, share/rpmsrate: add icons in compssUser
-	and list
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* Xconfigurator.pm: corrected
-	updated
-	updated message
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: avoid locking cdrom for oem (compssUsers file still
-	opened).
-
-2001/04/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: Updated Norwegian file
-	Updated po files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated po files
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (main): reverse message
-
-	* install_steps_gtk.pm (installPackages): hide Details button sooner
-	(installPackages): do not show button "Details" when no advertising
-
-	* Xconfigurator_consts.pm: do not set XkbVariant "winkeys" for
-	ru(winkeys), it is redondant
-
-	* interactive_gtk.pm (ask_from_entries_refW): set_default_size width 250
-
-	* any.pm (ask_users): do not have an empty icon. better not ask for icon
-	if no icon
-
-2001/04/13  siegel
-
-	* share/po/de.po: updates
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* Xconfigurator.pm: corrected
-	updated
-	updated message
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: avoid locking cdrom for oem (compssUsers file still
-	opened).
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (main): reverse message
-
-	* install_steps_gtk.pm (installPackages): hide Details button sooner
-	(installPackages): do not show button "Details" when no advertising
-
-	* Xconfigurator_consts.pm: do not set XkbVariant "winkeys" for
-	ru(winkeys), it is redondant
-
-	* interactive_gtk.pm (ask_from_entries_refW): set_default_size width 250
-
-	* any.pm (ask_users): do not have an empty icon. better not ask for icon
-	if no icon
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* Xconfigurator.pm: corrected
-	updated
-	updated message
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* install_steps_gtk.pm (installPackages): hide Details button sooner
-	(installPackages): do not show button "Details" when no advertising
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: updated
-	updated message
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* install_steps_gtk.pm (installPackages): do not show button "Details"
-	when no advertising
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: updated
-	updated message
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* install_steps_gtk.pm (installPackages): do not show button "Details"
-	when no advertising
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: updated
-	updated message
-
-	* standalone/draknet: message corrected
-	updated
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* bootlook.pm: embedded = 0 -> local
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* install_steps_gtk.pm (installPackages): do not show button "Details"
-	when no advertising
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-	add DATABASES to Database
-	add icons for server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* network.pm: updated wireless configuration
-
-	* netconnect.pm: corrected loop in isdn + other things
-
-	* bootlook.pm: embedded = 0 -> local
-
-	* standalone/draknet: updated
-	added delete event
-
-2001/04/13  François Pons  <fpons@mandrakesoft.com>
-
-	* netconnect.pm: fixed syntax error :-)
-
-	* install_steps.pm, install_steps_gtk.pm: added conditional update-menus
-	if package are installed.
-
-	* install_steps_interactive.pm: added conditional update-menus if package
-	are installed.
-	make sure update-menus is called after installing cups related packages.
-
-2001/04/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/fr.po, share/po/sv.po, share/po/hu.po: Updated
-	Croatian and Swedish files
-
-	* share/po/sl.po, share/po/cy.po, share/po/ca.po, share/po/ga.po,
-	share/po/is.po, share/po/cs.po: Removed po files with too low leve lof
-	translating ( < 60% )
-	so they are not included on final CD
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* bootlook.pm: don't use Locale::GetText, use DrakX's i18n
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* my_gtk.pm (new): make dams happy
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add DATABASES to Database
-	add icons for server
-
-2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c: remove unnecessary redhat history code
-
-2001/04/12  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed wrong kernel version extraction (typically for
-	upgrade).
-
-	* install_steps_interactive.pm: removed Cancel of Summary.
-	fixed ask printer configuration.
-
-	* detect_devices.pm: fix Hewlett-Packard to HP in case.
-
-	* standalone/printerdrake: never ask to configure a printer in standalone.
-
-	* printerdrake.pm: automatically add a queue if nothing exists.
-	fixed ask to configure a printer.
-
-	* interactive.pm: removed strict die on empty list.
-
-	* live_install2: added some gtk and gdk_imlib missing variables.
-
-	* live_install: removed gtk variable for data, moved to second script.
-
-	* modules.pm, commands.pm, lang.pm, pkgs.pm, keyboard.pm: fixed log of
-	packdrake.
-
-2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c: remove unneeded #define
-
-	* standalone/drakgw: add some rule so later on tinyfirewall will not
-	prevent everything from working
-
-	* share/po/fr.po: minor fix
-	write some ppc translations
-
-2001/04/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: Updated Italian file
-
-2001/04/12  Pixel  <pixel@mandrakesoft.com>
-
-	* printer.pm: use run_program and remove "require run_program"s
-
-	* my_gtk.pm (main): only accept X (gdk) events key_press, key_release and
-	exposure (so
-	that not to receive motion_notify which would generate focus_out in
-	non-interesting cases)
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): fix the test
-	for empty lists
-	(ask_from_entries_refH_powered_normalize):
-	  - when not_edit and empty list, die.
-	  - when not_edit and single element list, don't display that entry.
-
-	* lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"
-
-	* modules.pm (configure_pcmcia): better handling for not running cardmgr
-	many times
-	(configure_pcmcia): always run cardmgr so that it is run even if stage1
-	did create a /var/run/stab. This is just a try :-/
-
-2001/04/12  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: if neuneu but explicited clicked, don't skip
-	corrected pcmcia driver
-
-2001/04/12  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: removed Cancel of Summary.
-	fixed ask printer configuration.
-
-	* common.pm: improved bestMatchSentence2.
-
-	* detect_devices.pm: fix Hewlett-Packard to HP in case.
-
-	* standalone/printerdrake: never ask to configure a printer in standalone.
-
-	* printerdrake.pm: automatically add a queue if nothing exists.
-	fixed ask to configure a printer.
-
-	* interactive.pm: removed strict die on empty list.
-
-	* modules.pm, commands.pm, lang.pm, keyboard.pm, pkgs.pm: fixed log of
-	packdrake.
-
-2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: add some rule so later on tinyfirewall will not
-	prevent everything from working
-
-	* share/po/fr.po: write some ppc translations
-	un-dadouize a problem
-
-2001/04/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: Updated Italian file
-
-2001/04/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): fix no advertising with less
-	than 20MB of packages
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize):
-	  - when not_edit and empty list, die.
-	  - when not_edit and single element list, don't display that entry.
-
-	* install_steps_interactive.pm (configureX): fix for X test at install
-	with exotic fonts
-
-	* lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"
-
-	* modules.pm (configure_pcmcia): better handling for not running cardmgr
-	many times
-	(configure_pcmcia): always run cardmgr so that it is run even if stage1
-	did create a /var/run/stab. This is just a try :-/
-
-2001/04/12  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: corrected typo
-	added use bootloader
-
-	* standalone/net_monitor: typo
-
-	* netconnect.pm: if neuneu but explicited clicked, don't skip
-	corrected pcmcia driver
-	corrected typo
-
-	* lang.pm: pixel sux
-
-	* network.pm, standalone/draknet: corrected network connection
-
-	* my_gtk.pm: corrected set_modal
-
-2001/04/12  fabman
-
-	* share/po/es.po: updated spanish .po files
-
-2001/04/12  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: removed Cancel of Summary.
-	fixed ask printer configuration.
-
-	* common.pm: improved bestMatchSentence2.
-
-	* detect_devices.pm: fix Hewlett-Packard to HP in case.
-
-	* standalone/printerdrake: never ask to configure a printer in standalone.
-
-	* printerdrake.pm: automatically add a queue if nothing exists.
-	fixed ask to configure a printer.
-
-	* modules.pm, commands.pm, lang.pm, keyboard.pm, pkgs.pm: fixed log of
-	packdrake.
-
-2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: un-dadouize a problem
-	sync
-
-2001/04/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/zh_CN.GB2312.po, share/po/es.po, share/po/fr.po,
-	share/po/sr.po, share/po/de.po, share/po/el.po, share/po/et.po,
-	share/po/sk.po, share/po/eu.po, share/po/sl.po, share/po/vi.po,
-	share/po/ko.po, share/po/eo.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/da.po, share/po/is.po, share/po/zh_TW.Big5.po,
-	share/po/id.po: Updated Chinese file
-
-	* share/po/it.po: Updated Italian file
-	Updated Chinese file
-
-2001/04/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): fix no advertising with less
-	than 20MB of packages
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize):
-	  - when not_edit and empty list, die.
-	  - when not_edit and single element list, don't display that entry.
-
-	* install_steps_interactive.pm (configureX): fix for X test at install
-	with exotic fonts
-
-	* lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"
-
-	* modules.pm (configure_pcmcia): better handling for not running cardmgr
-	many times
-	(configure_pcmcia): always run cardmgr so that it is run even if stage1
-	did create a /var/run/stab. This is just a try :-/
-
-2001/04/12  siegel
-
-	* share/po/de.po: new german version
-
-2001/04/12  yduret
-
-	* bootlook.pm: added some stuff
-
-2001/04/11  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: no setmodal 0 if wizard
-
-2001/04/12  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: corrected typo
-	added use bootloader
-
-	* netconnect.pm: corrected typo
-
-2001/04/12  fabman
-
-	* share/po/es.po: updated spanish .po files
-
-2001/04/12  siegel
-
-	* share/po/de.po: new german version
-
-2001/04/11  dam's  <damien@mandrakesoft.com>
-
-	* share/themes-mdk.rc: tooltips
-
-	* netconnect.pm: updated
-
-	* my_gtk.pm: no setmodal 0 if wizard
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (reallyChooseGroups): relook
-
-	* install_steps_interactive.pm (chooseGroups): warn if chosen size is too
-	big
-
-	* share/compssUsers: adapt for new profile choosing layout
-
-2001/04/11  yduret
-
-	* bootlook.pm: bug fix in autologin
-
-2001/04/11  dam's  <damien@mandrakesoft.com>
-
-	* share/themes-mdk.rc: tooltips
-
-	* bootlook.pm: updated
-	corrected
-
-	* tinyfirewall.pm: installation of package : not at the same place
-
-	* netconnect.pm: updated
-	added driver for pcmcia, corrected eth conf for pppoe
-
-2001/04/11  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: added missing LD_LOADER for calling rpm.
-
-	* printerdrake.pm: fixed probe on kernel 2.4.
-	make printer devices more accurate.
-	removed limitation to only one port probed
-
-	* pkgs.pm: added missing use of LD_LOADER for starting parsehdlist on
-	upgrade.
-
-	* detect_devices.pm: avoid need of shell for live upgrade on serial_probe
-	(removed 2>/dev/null which
-	is not necessary).
-	fixed printer probe (usb and parallel).
-
-	* mouse.pm: fix wacom usb tablet
-
-	* standalone/printerdrake: added missing take into account of
-	/etc/modules.conf
-
-	* lang.pm: added missing LD_LOADER reference and remove old code
-	commented.
-
-2001/04/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: unfuzzyize
-	sync with new msg in services.pm and compssUsers
-	sync with pablo update
-	fixes of translations
-	write the shitload of untranslated and fuzzy msg
-
-	* standalone/tinyfirewall: i18n title
-
-	* services.pm: have many more services tooltipped from here so we can get
-	translations afterwards
-
-	* share/compssUsers: fix typos of rpmsrate groups
-
-	* standalone/drakgw: kosmetik
-	do i18n for title also
-
-2001/04/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/rpmsrate: Added reference to netscape-chinese_big5 file
-
-	* share/po/DrakX.pot, share/po/wa.po: Updated Walloon file
-	Updated po files
-	Updated Slovak, Walloon and Polish files
-
-	* share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
-	share/po/ko.po, share/po/ja.po, share/po/is.po, share/po/zh_TW.Big5.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/zh_CN.GB2312.po, share/po/sk.po, share/po/vi.po,
-	share/po/ca.po, share/po/cs.po: Updated po files
-	Updated Slovak, Walloon and Polish files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/ga.po,
-	share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/cy.po, share/po/nl.po, share/po/sv.po, share/po/hu.po,
-	share/po/no.po, share/po/th.po, share/po/el.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/af.po: Updated po files
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* run_program.pm (rooted): don't call install_any::check_prog if rooted
-
-	* standalone/drakboot: make it work (why was bootloader::install
-	commented?)
-
-	* share/compssUsers: adapt for new profile choosing layout
-
-	* Makefile: take cardmgr-*
-
-	* install_steps_interactive.pm (chooseGroups): warn if chosen size is too
-	big
-	translate the ``path'' in profile selection
-
-	* share/po/i18n_compssUsers: relooking
-
-	* any.pm (setupBootloader): translate the bootloaders to use
-	(setupBootloader): nicer look&feel
-
-	* install_any.pm (fsck_option): add a closing ``"'' so that strings to
-	i18n extraction works
-	(fsck_option): add a closing ``"'' so that strings to i18n extraction
-	works
-	(check_prog): make it work
-
-	* install_steps_gtk.pm (reallyChooseGroups): relook
-	(installPackages): pressing "Details" gives you more detailed info
-	(reallyChooseGroups): start relooking
-	(installPackages): don't display advertising if less 20MB of packages
-	translate the ``path'' in profile selection
-
-2001/04/11  warly
-
-	* share/compssUsers: Add descr for servers
-
-2001/04/11  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: make printer devices more accurate.
-	removed limitation to only one port probed
-
-	* mouse.pm: fix wacom usb tablet
-
-	* standalone/printerdrake: added missing take into account of
-	/etc/modules.conf
-
-	* detect_devices.pm: fixed printer probe (usb and parallel).
-
-2001/04/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* services.pm: have many more services tooltipped from here so we can get
-	translations afterwards
-
-	* share/po/fr.po: write the shitload of untranslated and fuzzy msg
-
-	* share/compssUsers: fix typos of rpmsrate groups
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* run_program.pm (rooted): don't call install_any::check_prog if rooted
-
-	* diskdrake.pm (More): fix exception relaunching
-
-	* install_any.pm (check_prog): make it work
-
-	* any.pm (setupBootloader): nicer look&feel
-
-	* standalone/drakboot: make it work (why was bootloader::install
-	commented?)
-
-	* Makefile: take cardmgr-*
-
-2001/04/11  fabman
-
-	* share/po/es.po: updated spanish .po file
-
-2001/04/11  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: make printer devices more accurate.
-	removed limitation to only one port probed
-
-	* mouse.pm: fix wacom usb tablet
-
-	* standalone/printerdrake: added missing take into account of
-	/etc/modules.conf
-
-	* detect_devices.pm: fixed printer probe (usb and parallel).
-
-2001/04/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: write the shitload of untranslated and fuzzy msg
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/make_mdkinst_stage2: to lighten mdkinst_stage2:
-	  - completly remove po's (will be getFile'd)
-	  - remove LVM progs, resize_reiserfs, big fonts (will be getFile'd)
-
-	* standalone/drakboot: make it work (why was bootloader::install
-	commented?)
-
-	* share/aliases: add rmmod -> insmod_
-
-	* lang.pm (get_x_fontset): special cases for some big (size) fonts
-
-	* Makefile: take cardmgr-*
-
-	* install_any.pm (check_prog): make it work
-	(check_prog): if a prog isn't available, try to fetch it via getFile
-	(remove_bigseldom_used): created, purpose: remove unneeded stuff on
-	stage2
-	to allow a getAndSaveFile.
-	(getAndSaveFile): if only one arg is given, assume the name is the same
-
-	* standalone/XFdrake: fix bug for running xfs
-
-	* any.pm (setupBootloader): nicer look&feel
-
-	* diskdrake.pm (More): fix exception relaunching
-	check resize_reiserfs is there or get it
-
-	* run_program.pm (rooted): don't call install_any::check_prog if rooted
-	in install, call install_any::check_prog to allow shadow progs which are
-	fetched when needed via getFile
-
-	* share/list: remove rmmod (is now a symlink)
-
-2001/04/11  siegel
-
-	* share/po/de.po: updated german version
-
-2001/04/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ca.po: Updated Catalan file
-
-2001/04/10  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: 
-	  - fix wiz_*.png removing
-	  - fix copying cardmgr* which included cardmgr.o
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/make_mdkinst_stage2: to lighten mdkinst_stage2:
-	  - completly remove po's (will be getFile'd)
-	  - remove LVM progs, resize_reiserfs, big fonts (will be getFile'd)
-
-	* standalone/XFdrake: fix bug for running xfs
-
-	* diskdrake.pm: check resize_reiserfs is there or get it
-
-	* share/aliases: add rmmod -> insmod_
-
-	* install_any.pm (check_prog): if a prog isn't available, try to fetch it
-	via getFile
-	(remove_bigseldom_used): created, purpose: remove unneeded stuff on
-	stage2
-	to allow a getAndSaveFile.
-	(getAndSaveFile): if only one arg is given, assume the name is the same
-
-	* share/list: remove rmmod (is now a symlink)
-
-	* run_program.pm: in install, call install_any::check_prog to allow shadow
-	progs which are
-	fetched when needed via getFile
-
-	* lang.pm (get_x_fontset): special cases for some big (size) fonts
-
-2001/04/10  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad network restart
-
-	* my_gtk.pm: corrected bad font
-
-	* network.pm: get rid of ifcfg-
-	minor correction
-
-2001/04/10  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fixed selection of CDs.
-
-	* devices.pm: added input/event class of devices (necessary for usb wacom
-	at install)
-
-2001/04/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/mkinitrd_helper/mkinitrd_helper.c,
-	mdk-stage1/mkinitrd_helper/Makefile: 
-	  - honour quiet mode at boot time
-	  - fake modprobe to shut up kmod
-
-	* bootlook.pm: do not use french in i18n'ed msg yvounet!!
-
-	* standalone/drakgw: add INTERFACE param in sysconfig parameter for smooth
-	interoperation with bastille-firewall
-
-2001/04/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po: Updated Czech file
-	Updated po files
-
-	* share/po/ko.po, share/po/ja.po, share/po/id.po, share/po/vi.po: Updated
-	Indonesian, Japanese, Korean and Vietnamese files
-	Updated po files
-
-	* share/po/DrakX.pot, share/po/wa.po, share/po/fi.po: Added a missing
-	translatable string
-	Updated po files
-
-	* share/po/ca.po: Updated Catalan file
-	Updated po files
-
-	* share/locales.tar.bz2: Added missing file for Vietnamese
-
-	* share/po/bg.po: Updated Bulgarian file
-	Updated po files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
-	share/po/fr.po, share/po/ga.po, share/po/sr.po, share/po/de.po,
-	share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po,
-	share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/cy.po,
-	share/po/nl.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/da.po, share/po/af.po: Updated po files
-
-2001/04/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm: use gtkset_tip (so that no tip is set when tip eq
-	'')
-	(create_boxradio): handle double_click
-	(ask_from_entries_refW): use radio boxes instead of list/clist if small
-	number
-	of choices
-	(create_ctree): handle single click on node opens the node
-
-	* my_gtk.pm: create and use gtkset_tip
-	(_create_window): XSetInputFocus done only on expose_event of the
-	topmost window
-	(new): ensure only one modal
-
-	* Xconfigurator.pm (main): have an "Ok" button to leave
-
-	* install_steps_gtk.pm: use gtkset_tip
-	(choosePackagesTree): fix "Show automatically selected packages"
-	create and use gtkset_tip
-
-	* Makefile: 
-	  - fix wiz_*.png removing
-	  - fix copying cardmgr* which included cardmgr.o
-
-2001/04/10  warly
-
-	* share/rpmsrate: add viavoicemenu_{us,gr,fe}
-
-2001/04/10  yduret
-
-	* bootlook.pm: grub/lilo mode
-
-2001/04/10  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad network restart
-
-	* my_gtk.pm: corrected bad font
-
-	* network.pm: get rid of ifcfg-
-	minor correction
-
-2001/04/09  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: typo
-
-2001/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Create): check for 40MB instead of 32MB for min reiserfs
-	size as the check is done before rounding.
-
-	* bootloader.pm (install_grub): altconfigfile only if /boot is not
-	reiserfs :-/
-
-	* tools/make_mdkinst_stage2: fix the stage2 too big (was keeping too many
-	modules.cz)
-
-	* install_any.pm (setPackages): also have SOUND set in compssUsersChoice
-	based on pciusbtable
-
-	* share/compssUsers, share/rpmsrate: 
-	  - SOUND is now a flag
-	  - AUDIO is the group
-
-2001/04/09  siegel
-
-	* tinyfirewall.pm: i18n fixes
-
-2001/04/09  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixes of grub installation using hd.img
-	fix the fix for loopback mounting of hd.img.
-
-	* Xconfigurator.pm: fixed always 8bpp for autoDefaultDepth.
-
-	* pkgs.pm: changed transaction error management this way: if a transaction
-	fails, DrakX
-	tries to make as many transaction as there are package that have failed
-	to be
-	installed (this means one transaction of only one package). This help
-	installing
-	most package that are correct (as a transaction that failed cause all
-	remaining
-	package to be not installed).
-
-2001/04/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: 8.0rc -> 8.0
-
-	* rescue/tree/etc/oem: fix english thanks to Kevin
-
-	* standalone/drakgw: do not die when an initscript returns non-0
-	(initscripts too buggy)
-
-2001/04/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/gl.po, share/po/ca.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Danish file
-
-	* any.pm: changed  ISO_8859-1 TO ISO-8859-1
-
-2001/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm, install_steps.pm, any.pm: create to_utf8 from po strings,
-	use it for kdm message
-
-	* diskdrake.pm (Create): check for 40MB instead of 32MB for min reiserfs
-	size as the check is done before rounding.
-
-	* bootloader.pm (install_grub): altconfigfile only if /boot is not
-	reiserfs :-/
-
-	* tools/make_mdkinst_stage2: fix the stage2 too big (was keeping too many
-	modules.cz)
-
-	* install2.pm (main): sets umask (seems like default one is no more 022,
-	kernel change?)
-
-	* Xconfigurator_consts.pm, Xconfig.pm, Xconfigurator.pm: handle XkbModel
-	(especially for abnt2 (br))
-
-	* install_any.pm (setPackages): also have SOUND set in compssUsersChoice
-	based on pciusbtable
-
-	* share/compssUsers, share/rpmsrate: 
-	  - SOUND is now a flag
-	  - AUDIO is the group
-
-	* lang.pm (load_po): sets $lang::charset to the charset used in the po
-
-2001/04/09  siegel
-
-	* share/po/de.po: fixes
-
-	* Xconfigurator.pm: fixed i18n bug
-
-2001/04/09  yduret
-
-	* standalone/tinyfirewall: button policy (thx gc)
-
-	* standalone/drakgw: deyvounification : remove some un-useful comments in
-	code
-
-2001/04/09  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: corrected
-
-	* standalone.pm: install function now returns the return value of the
-	system.
-
-	* netconnect.pm: corrected buggy cable
-	removed buggy modem screen repetition
-
-2001/04/09  François Pons  <fpons@mandrakesoft.com>
-
-	* standalone/mousedrake: fixed mousedrake (with interactive.pm fixes
-	applied).
-	fixed cancel support.
-	added conditional restart of gpm on mouse configuration change.
-
-	* fs.pm: removed notail option for reiserfs.
-
-	* standalone/keyboarddrake: fixed exit on cancel (should cause trouble in
-	DrakConf only).
-
-	* install_any.pm: added missing package to copy.
-
-	* rescue/tree/etc/oem: fixes of grub installation using hd.img
-	fix the fix for loopback mounting of hd.img.
-	fixed hd.img access right.
-	make kernel22 installed for every oem install...
-	moved some package to closure instead of installed.
-	added some missing packages.
-	added nolock option for nfsmount.
-	added missing package to copy.
-
-2001/04/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: fix Traktopel Maxim thanks to Kevin Lawton
-
-	* mdk-stage1/Makefile: 8.0beta -> 8.0rc
-
-	* standalone/drakgw: fix for when there is an already existing rc.firewall
-	complies with old format of drakgw so that upgrades will work
-
-	* rescue/tree/etc/oem: fix english thanks to Kevin
-
-2001/04/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* any.pm: changed  ISO_8859-1 TO ISO-8859-1
-
-2001/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm, install_steps.pm, any.pm: create to_utf8 from po strings,
-	use it for kdm message
-
-	* interactive.pm (ask_from_treelistf): make it behaves correctly when
-	"cancel" is clicked
-
-	* Xconfigurator_consts.pm, Xconfig.pm, Xconfigurator.pm: handle XkbModel
-	(especially for abnt2 (br))
-
-	* install2.pm (main): sets umask (seems like default one is no more 022,
-	kernel change?)
-	(main): log the umask
-
-	* devices.pm (entry): add hd[ijkl]*
-
-	* bootloader.pm (install_lilo): better handling of map-drive (there's not
-	always only 2 disks!)
-
-	* lang.pm (load_po): sets $lang::charset to the charset used in the po
-
-2001/04/09  siegel
-
-	* share/po/de.po: fixes
-
-2001/04/09  yduret
-
-	* standalone/drakboot: added lilo/grub
-
-	* bootlook.pm: added lilo/grub mode
-
-2001/04/09  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: removed use install_any
-
-	* tinyfirewall.pm: corrected
-
-	* netconnect.pm: corrected buggy cable
-	removed buggy modem screen repetition
-	corrected bad bug when creating new profile
-
-	* standalone.pm: install function now returns the return value of the
-	system.
-
-	* Makefile: removed install_any
-
-2001/04/09  François Pons  <fpons@mandrakesoft.com>
-
-	* standalone/mousedrake: fixed mousedrake (with interactive.pm fixes
-	applied).
-	fixed cancel support.
-	added conditional restart of gpm on mouse configuration change.
-
-	* rescue/tree/etc/oem: fixed hd.img access right.
-	make kernel22 installed for every oem install...
-	moved some package to closure instead of installed.
-	added some missing packages.
-	added nolock option for nfsmount.
-	added missing package to copy.
-
-	* fs.pm: removed notail option for reiserfs.
-
-	* standalone/keyboarddrake: fixed exit on cancel (should cause trouble in
-	DrakConf only).
-
-	* printer.pm: added Till patch for printer (raw queue and PostScript
-	queue).
-
-	* install_any.pm: added missing package to copy.
-
-2001/04/09  kjx
-
-	* share/po/zh_CN.GB2312.po: translate before 8.0 release
-
-2001/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): log the umask
-
-	* interactive.pm (ask_from_treelistf): make it behaves correctly when
-	"cancel" is clicked
-
-	* devices.pm (entry): add hd[ijkl]*
-
-	* bootloader.pm (install_lilo): better handling of map-drive (there's not
-	always only 2 disks!)
-
-2001/04/09  yduret
-
-	* bootlook.pm: fix, added lilo/grub frame
-	fixed till bug
-
-2001/04/08  dam's  <damien@mandrakesoft.com>
-
-	* rescue/tree/etc/oem, rescue/tree/etc/closurepkgs, install_any.pm: get
-	rid of kisdn
-
-	* tinyfirewall.pm: updated
-	added package installation
-
-	* netconnect.pm: get rid of kisdn
-	updated
-	no more askwarn in wizard mode
-	updated
-
-	* standalone/tinyfirewall, standalone/drakgw, my_gtk.pm,
-	netconnect_consts.pm: updated
-
-	* standalone/net_monitor: removed Data::Dumper
-	typo
-
-	* standalone/draknet: updated
-	typo
-	corrected bad isdn field
-
-2001/04/08  daouda
-
-	* share/rpmsrate: increase quanta weight .
-
-2001/04/08  fabman
-
-	* share/po/es.po: updated spanish .po files
-
-2001/04/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: correct my mistakes on removing some modules from stage1 and
-	stage2 (-> remove only from stage1)
-
-2001/04/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/compssUsers.desktop, standalone/draknet: Fixed some english typos
-
-	* standalone/net_monitor, netconnect.pm: Some English changes
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Fixed some english typos
-	Updated pot file and various po files
-
-2001/04/08  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (write): remove debugging info :-(
-
-	* bootloader.pm (suggest): add option "quiet" to the kernel in fb
-	(requested by chmou)
-
-	* install_steps.pm (afterInstallPackages): remove setting of kde charset
-	in kdeglobals (kde is a grown-up now)
-
-2001/04/08  siegel
-
-	* share/po/de.po: new german version
-	updates
-
-2001/04/07  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: typo
-	typo
-	net_monitor incorporation
-
-	* standalone/net_monitor, Makefile.config: net_monitor incorporation
-
-2001/04/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po: updated Croatian files
-
-	* share/po/wa.po, share/po/sr.po, share/po/sp.po, share/po/DrakX.pot,
-	share/po/ko.po, share/po/it.po: Updated Korean, Italian, Serbian and
-	Walloon files
-
-2001/04/07  warly
-
-	* share/compssUsers: PCL-CVS release v2_9_9
-	Repository       : :ext:warly@cvs.mandrakesoft.com:/home/cvs/cooker
-	Working directory: /home/warly/local/share/mdk/gi/perl-install/share/
-	In directory .:
-	              Modified                compssUsers
-	In directory po:
-	patched       Up-To-Date              po/DrakX.pot
-	patched       Up-To-Date              po/ca.po
-	patched       Up-To-Date              po/de.po
-	patched       Up-To-Date              po/hr.po
-	patched       Up-To-Date              po/id.po
-	patched       Up-To-Date              po/it.po
-	patched       Up-To-Date              po/ja.po
-	patched       Up-To-Date              po/ko.po
-	patched       Up-To-Date              po/sp.po
-	patched       Up-To-Date              po/sr.po
-	patched       Up-To-Date              po/vi.po
-	patched       Up-To-Date              po/wa.po
-	
-	  --------------------- End ---------------------
-	  -- last cmd: cvs -f update -d -P --
-
-	* share/rpmsrate: PCL-CVS release v2_9_9
-	Repository       : :ext:warly@cvs.mandrakesoft.com:/home/cvs/cooker
-	Working directory: /home/warly/local/share/mdk/gi/perl-install/share/
-	In directory .:
-	              Modified                rpmsrate
-	
-	  --------------------- End ---------------------
-	  -- last cmd: cvs -f update -d -P --
-
-2001/04/06  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed absence of /boot in install CD for oem stuff.
-
-2001/04/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: use jeff's suggestions to remove some old stuff
-	Sun Happy Meal only for Sparc
-
-	* mdk-stage1/stdio-frontend.c, mdk-stage1/probing.c, mdk-stage1/modules.c:
-	
-	  - do not print warning when we are in AUTOMATIC and insmod failed
-	because of file-not-found in mar file (raid cards, etc)
-	  - print "please include msg from Alt-F3" for this warning message to
-	ease further support
-	  - print pci entry of cards found in te logs
-
-	* mdk-stage1/mkinitrd_helper/mkinitrd_helper.c,
-	mdk-stage1/mkinitrd_helper/Makefile: steal raid_autorun from rh
-
-2001/04/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ca.po, share/po/id.po: Updated Catalan and Indonesian files
-
-	* share/po/ja.po, share/po/vi.po: Updated Japanese and Vietnamese files
-
-2001/04/06  siegel
-
-	* share/po/de.po: updates
-
-2001/04/06  yduret
-
-	* standalone/drakgw: swap cancel/configure button
-
-2001/04/06  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet2: dead code
-
-	* standalone/net_monitor: updated
-
-	* netconnect.pm: be quiet
-
-2001/04/06  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed absence of /boot in install CD for oem stuff.
-	fixed if label does not exists and grub refuse to read.
-
-	* install_steps_interactive.pm: fixed typo for cups checking of
-	installation.
-	fixed "No printer" after configuring cups for remove server.
-	added log for CD medium chosen par user.
-
-	* pkgs.pm: added killing on child process of transaction that have been
-	detached (typically
-	with pid > transaction_pid and parent is 1).
-
-2001/04/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: 
-	  - correct yvounetification in i18n stuff
-	  - remove some remaining debugging printings
-	  - add a bit more of explanations when starting drakgw in wizard mode
-
-	* modules.pm: re integrate some TR net cards
-
-	* mdk-stage1/stdio-frontend.c, mdk-stage1/probing.c, mdk-stage1/modules.c:
-	
-	  - do not print warning when we are in AUTOMATIC and insmod failed
-	because of file-not-found in mar file (raid cards, etc)
-	  - print "please include msg from Alt-F3" for this warning message to
-	ease further support
-	  - print pci entry of cards found in te logs
-
-2001/04/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Thai file
-	Updated pot file
-
-2001/04/06  yduret
-
-	* standalone/drakgw: swap cancel/configure button
-
-2001/04/06  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: addde tk like routines
-
-	* netconnect.pm: be quiet
-	correctedInternetAccessTye and ADSLType
-
-	* Makefile: iCorrected missing file install_any.pm. pixel sux.
-
-	* standalone/draknet2: dead code
-
-	* standalone/net_monitor: updated
-	updated
-	updated
-	updated
-	updated
-	added
-
-	* pixmaps/net_d.png, pixmaps/net_c.png: added
-
-	* share/logo-mandrake.png: new icon
-
-2001/04/06  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed if label does not exists and grub refuse to
-	read.
-
-	* install_steps_interactive.pm: fixed typo for cups checking of
-	installation.
-	fixed "No printer" after configuring cups for remove server.
-	added log for CD medium chosen par user.
-
-	* pkgs.pm: added killing on child process of transaction that have been
-	detached (typically
-	with pid > transaction_pid and parent is 1).
-
-2001/04/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Thai file
-	Updated pot file
-
-2001/04/06  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/make_mdkinst_stage2: instead of removing modules.cz-2.2*, remove
-	every modules.cz except the
-	biggest one
-
-	* install_steps.pm, fs.pm, install2.pm: create install_any::write_fstab
-	and use it
-
-	* install_any.pm: add write_fstab
-	create install_any::write_fstab and use it
-
-2001/04/06  yduret
-
-	* bootlook.pm: minor fix
-
-	* standalone/drakgw: recoded a embedded && gtk mode
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (fs_options): created (gets codepage and iocharset)
-
-	* common.pm (if_): better logging of the error
-
-2001/04/06  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/make_mdkinst_stage2: instead of removing modules.cz-2.2*, remove
-	every modules.cz except the
-	biggest one
-
-	* install_steps.pm, fs.pm, install2.pm: create install_any::write_fstab
-	and use it
-
-	* install_any.pm: add write_fstab
-	create install_any::write_fstab and use it
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakboot: 
-	  - fix getting result of fsedit::hds
-	  - cleanup
-
-	* lang.pm (fs_options): created (gets codepage and iocharset)
-
-	* common.pm (if_): better logging of the error
-	(getVarsFromSh): fix for AA="" inspired by chmou the Great (but the
-	Great
-	what?)
-
-	* bootloader.pm (install_grub): small fix
-	(install_lilo): fix lilo's dumbness (when lilo warns about not the first
-	drive, it usually fails)
-
-	* diskdrake.pm (More): created, asks for supermount, rescue pt, reload.
-
-	* install_steps_interactive.pm (addUser): default autologin to first user
-	in beginner
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (autologin): fix
-	ask for autologin
-
-	* install_steps_interactive.pm: ask for autologin
-	(generateAutoInstFloppy): do not use $o->{pcmcia} to know if pcmcia.img
-	was used. Better have a look at /proc/cmdline
-
-	* bootloader.pm (install_lilo): fix lilo's dumbness (when lilo warns about
-	not the first drive, it usually fails)
-
-	* pkgs.pm, share/rpmsrate: 
-	  - s/PCI/HW/
-	  - add rio500
-
-	* install_any.pm (kernelVersion): fix enormous stupid typo
-
-	* common.pm (getVarsFromSh): fix for AA="" inspired by chmou the Great
-	(but the Great
-	what?)
-
-	* install_steps.pm (exitInstall): oups, report_bug is no more in
-	commands::
-
-	* diskdrake.pm (More): created, asks for supermount, rescue pt, reload.
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (choosePackagesTree): invert the meaning of 'Show
-	automatically selected
-	packages' to go along with the new description
-
-	* Xconfigurator.pm (write_XF86Config): try to have $_ interpreted
-	(otherwise you get things like ``InputDevice "Stylus$_" "AlwaysCore"'')
-
-	* install_any.pm (kernelVersion): fix enormous stupid typo
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* install_steps.pm (exitInstall): oups, report_bug is no more in
-	commands::
-	(configureXBefore): fix the xkb verification (was broken for things like
-	``de(nodeadkeys)'')
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* any.pm: ask for autologin
-
-	* fs.pm (format_reiserfs): quietly format reiserfs
-
-	* commands.pm: 
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* install_steps_interactive.pm: ask for autologin
-	(generateAutoInstFloppy): do not use $o->{pcmcia} to know if pcmcia.img
-	was used. Better have a look at /proc/cmdline
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* share/rpmsrate: 
-	  - add ldetect
-	  - the default Aurora chose is the categorizing one
-
-2001/04/05  siegel
-
-	* share/po/de.po: fixed typo
-
-2001/04/05  yduret
-
-	* bootlook.pm: fix pablo mess
-	install autolgin just if we want to autolog :)
-
-2001/04/05  dam's  <damien@mandrakesoft.com>
-
-	* ChangeLog, bootloader.pm: readded passwd. Must verify that it's secure
-	vs msec.
-
-	* my_gtk.pm: added gtksize
-
-2001/04/05  fcrozat
-
-	* share/rpmsrate: No longer propose nautilus-mozilla (required by
-	nautilus)
-	propose nautilus-trilobite (for Eazel services)
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (choosePackagesTree): invert the meaning of 'Show
-	automatically selected
-	packages' to go along with the new description
-
-	* commands.pm, install_steps_interactive.pm, install_any.pm: 
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* fs.pm (format_reiserfs): quietly format reiserfs
-
-	* Xconfigurator.pm (write_XF86Config): try to have $_ interpreted
-	(otherwise you get things like ``InputDevice "Stylus$_" "AlwaysCore"'')
-
-	* share/rpmsrate: 
-	  - add ldetect
-	  - the default Aurora chose is the categorizing one
-
-	* install_steps.pm (configureXBefore): fix the xkb verification (was
-	broken for things like ``de(nodeadkeys)'')
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-2001/04/05  siegel
-
-	* share/po/de.po: fixed typo
-
-2001/04/05  yduret
-
-	* bootlook.pm: fix pablo mess
-	install autolgin just if we want to autolog :)
-
-2001/04/04  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: added SCANNER and PHOTO groups
-
-2001/04/04  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: make sure to insmod parport_probe alone as it is not
-	available in 2.4 kernel and
-	this this not a problem (silent error).
-	added complete callback to check queue name under cups does contains
-	only letters, numerics or underscore.
-
-	* install_steps_interactive.pm: fixed printer description in summary.
-
-	* install2.pm: added selectPackagesToUpgrade the first time choosePackages
-	is called.
-
-	* Xconfigurator.pm: removed limitation to 24 bits for SiS card, make sure
-	to remove 32 bits depth
-	for such card.
-
-	* detect_devices.pm: fixed parport probe for printer under 2.4 kernel.
-
-	* diskdrake.pm: fixed adding 1 to size for resize2fs, causing a corruption
-	some times.
-
-	* printer.pm: added die on error of lpadmin.
-
-	* install_any.pm: fixed multiple wait message (looking+finding packages)
-
-2001/04/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sk.po, share/po/az.po: Updated Azeri and Slovak files
-
-2001/04/04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (tv): add ultracam & usbvideo
-	(@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so
-	skip them
-	(@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so
-	skip them
-
-	* install_any.pm (kernelVersion): cleanup
-
-2001/04/04  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_any.pm: kernelVersion mods for PPC
-
-2001/04/04  daouda
-
-	* share/rpmsrate: add gatos for ati tv card .
-
-2001/04/04  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: added SCANNER and PHOTO groups
-
-2001/04/04  François Pons  <fpons@mandrakesoft.com>
-
-	* live_install: unset locale environment for safety
-
-	* detect_devices.pm: added missing LD_LOADER reference for /bin/dmesg
-	(needed for live upgrade so
-	that error message are not printed)
-
-	* diskdrake.pm: fixed adding 1 to size for resize2fs, causing a corruption
-	some times.
-
-	* install_steps_gtk.pm: fixed to use SHARE_PATH instead of /usr/share
-
-	* any.pm, netconnect.pm: use SHARE_PATH instead of /usr/share
-
-	* install2.pm: added selectPackagesToUpgrade the first time choosePackages
-	is called.
-
-	* install_any.pm: fixed multiple wait message (looking+finding packages)
-
-2001/04/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (setPackages): better handling for tv, photo and scanner
-
-	* modules.pm (@skip_modules_on_stage1): kaweth and pegasus doesn't work on
-	stage1, so skip them
-	  - add photo, tv and scanner
-	  - add pegasus and kaweth modules
-
-2001/04/04  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: typo
-
-2001/04/04  daouda
-
-	* share/rpmsrate: add gatos for ati tv card .
-	reput klyx but in lower weight (2)
-	removed klyx from rpmsrate (bad idea according to pixel )
-	add klyx in install "Office KDE"
-
-2001/04/04  François Pons  <fpons@mandrakesoft.com>
-
-	* live_install: unset locale environment for safety
-
-	* detect_devices.pm: added missing LD_LOADER reference for /bin/dmesg
-	(needed for live upgrade so
-	that error message are not printed)
-
-	* install_steps_gtk.pm: fixed to use SHARE_PATH instead of /usr/share
-
-	* any.pm, netconnect.pm: use SHARE_PATH instead of /usr/share
-
-	* install2.pm: added selectPackagesToUpgrade the first time choosePackages
-	is called.
-
-	* install_steps.pm: disable frame buffer for Matrox cards.
-
-	* install_any.pm: fixed multiple wait message (looking+finding packages)
-
-2001/04/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (setPackages): better handling for tv, photo and scanner
-
-	* modules.pm (@skip_modules_on_stage1): kaweth and pegasus doesn't work on
-	stage1, so skip them
-	  - add photo, tv and scanner
-	  - add pegasus and kaweth modules
-
-	* share/compssUsers: remove TV (it is a hardware flag)
-
-2001/04/03  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: keep mount point configuration trhough multi-passes of
-	diskdrake and others.
-
-	* Xconfigurator.pm: prefer XF3 for SiS card.
-
-2001/04/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sr.po, share/po/sp.po, share/po/ko.po: Updated Korean file
-
-2001/04/03  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: do not use isSpecial which should only be used on
-	partitions
-	(main): do not have loopback pseudo hd in hds out of diskdrake
-
-	* modules.pm (load_raw): add the require install_any
-
-	* share/rpmsrate: restore Aurora (i really don't understand what i've done
-	with flag AURORA a month ago) to a simple behaviour
-
-	* install_steps_interactive.pm (choosePackages): do not make a special
-	case for upgrades (was: select the
-	min size, which was on contradiction with profile selection)
-
-	* fs.pm (real_format_part): give "-v 1" to mkreiserfs if kernel is 2.2
-
-	* standalone/mousedrake: fix horrible error (using an undefined $o)
-
-	* share/list: add back mkreiserfs
-
-	* standalone/XFdrake: don't start xfs if skiptest
-
-	* fsedit.pm (get_fstab): restore loopback::loopbacks because hds contains
-	only true
-	hard drives (not pseudo one like raid, loopback and lvm)
-
-	* bootloader.pm (suggest): trap strange error. Should not really fix the
-	pb
-
-	* install_steps.pm (setupBootloaderBefore): nicer Aurora presence
-	detetection
-
-	* lang.pm (charset): fix for chineese which have charset in the name
-
-	* Makefile: no more special case for mkreiserfs (can be done via -v 1)
-
-	* install_steps_gtk.pm (choosePackagesTree): better name than "Automatic
-	dependencies"
-
-	* install_any.pm (setPackages): don't preselect profiles in upgrade
-	(setPackages): handle Flag:<theflag>
-	(setPackages): install kernel22 if install kernel is a 2.2
-
-	* lvm.pm (get_lvs): remove the setting of flag isFormatted which was wrong
-	(didn't
-	propose to format it)
-	protect the loading of module lvm-mod
-
-2001/04/03  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_steps_interactive.pm, mouse.pm: PPC keyboard/mouse button
-	emulation
-
-2001/04/03  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: a lot of bugfixs
-	corrected bad flag test
-	corrected bad priority
-
-	* standalone/draknet: typo
-	bug fixes
-	removed debugging messages and Data::Dumper
-	corrected bad flag test
-
-2001/04/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/vi.po, share/po/DrakX.pot: Updated Vietnamese file
-
-2001/04/03  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (load_raw): add the require install_any
-
-	* share/rpmsrate: restore Aurora (i really don't understand what i've done
-	with flag AURORA a month ago) to a simple behaviour
-
-	* lang.pm (charset): fix for chineese which have charset in the name
-
-	* install_steps.pm (setupBootloaderBefore): nicer Aurora presence
-	detetection
-
-	* Makefile: no more special case for mkreiserfs (can be done via -v 1)
-
-	* install_steps_interactive.pm (choosePackages): do not make a special
-	case for upgrades (was: select the
-	min size, which was on contradiction with profile selection)
-
-	* fs.pm (real_format_part): give "-v 1" to mkreiserfs if kernel is 2.2
-
-	* install_steps_gtk.pm (choosePackagesTree): better name than "Automatic
-	dependencies"
-
-	* install_any.pm (setPackages): don't preselect profiles in upgrade
-	(setPackages): handle Flag:<theflag>
-	(setPackages): install kernel22 if install kernel is a 2.2
-
-	* share/list: add back mkreiserfs
-
-	* standalone/XFdrake: don't start xfs if skiptest
-
-	* lvm.pm (get_lvs): remove the setting of flag isFormatted which was wrong
-	(didn't
-	propose to format it)
-	protect the loading of module lvm-mod
-
-2001/04/02  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: corrected petite's mistake
-
-	* netconnect.pm: protecting against non existent files
-
-2001/04/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/make_boot_img, mdk-stage1/.cvsignore: fix
-	comply to all.kernels policy
-
-	* tools/make_mdkinst_stage2: fix remove of alternate cz modules
-
-2001/04/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po: Updated Czech file
-
-	* lang.pm: codepage option to mount requires only numeric values, eg "437"
-	and not "cp437"
-	Changed accordingly in the lists
-
-	* share/rpmsrate: Install latin2 Postscript fonts for latin2 locales,
-	install fonts-ttf-thai for Thai locale
-
-2001/04/02  Pixel  <pixel@mandrakesoft.com>
-
-	* c/Makefile: small cleanup for pcmcia_probe.c
-
-	* tools/Makefile (install): s/-r/-rf/
-
-	* install_any.pm (setPackages): s/reiserfs-utils/reiserfsprogs/
-	(setPackages): install imwheel if nbuttons > 3
-
-	* c/Makefile.PL: small cleanup for pcmcia_probe.c
-	don't use pcmcia_probe.o from stage1, better compile it here, otherwise
-	perl-install require mdk-stage1 to do compiled => circular dependency
-
-	* Makefile: ignore dams or at least dams errors
-
-	* c/.cvsignore: add pcmcia_probe.c
-
-2001/04/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/make_rescue_img: fix pixelization (aka take advantage of
-	all.kernels/.main)
-
-2001/04/02  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/Makefile (install): s/-r/-rf/
-
-2001/03/30  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/Makefile (install): fix the globbing for packdrake.pm and
-	rpmtools.pm
-
-2001/03/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/drvinst: test for "Card:" and not install, some videoboards are
-	not reported as DISPLAY_VGA :-(
-
-	* tools/make_mdkinst_stage2, docs/HACKING, rescue/make_rescue_img,
-	mdk-stage1/pci-resource/update-pci-ids.pl, docs/README: support more
-	than one boot kernel :-)
-
-	* rescue/list.i386: add reiserfsck
-
-2001/03/29  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: bad message at the end if kernel2.4
-
-	* netconnect.pm: added missing Device in Ethx when saving/loading
-
-	* standalone/draknet: translation
-
-2001/03/28  dam's  <damien@mandrakesoft.com>
-
-	* standalone/tinyfirewall: typo
-
-	* interactive_gtk.pm: corrected pixel shit if embedded
-
-	* standalone/draksec: embedded mode
-
-	* standalone/draknet: corrected gtkpng in gtkwpm
-	added translation
-
-	* bootlook.pm: cute button box
-
-	* tinyfirewall.pm: workaround to make it work if kernel 2.4
-
-2001/03/28  fcrozat
-
-	* share/rpmsrate: gmc is back in standard GNOME install, for people with
-	existing home
-
-2001/03/28  François Pons  <fpons@mandrakesoft.com>
-
-	* standalone/mousedrake, mouse.pm, standalone/XFdrake: fixed for
-	standalone XFdrake and mousedrake (multi-mouse and
-	correct probe (USB)).
-
-	* Xconfig.pm: re-fix mouse fix.
-	fixed wrong mouse probe.
-	fixed for standalone XFdrake and mousedrake (multi-mouse and
-	correct probe (USB)).
-
-	* Xconfigurator.pm: restore multi mouse support for XF3.
-
-2001/03/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/ca.po, share/po/tr.po: Updated Catalan, Danish,
-	Finnish, Croatian and Turkish files
-
-	* share/po/sk.po, share/po/ko.po: Updated Finnish, Korean and Slovak files
-
-	* share/po/az.po: Updated Azeri and Danish files
-
-	* share/po/fi.po: Updated Catalan, Danish, Finnish, Croatian and Turkish
-	files
-	Updated Finnish, Korean and Slovak files
-
-	* share/po/da.po: Updated Catalan, Danish, Finnish, Croatian and Turkish
-	files
-	Updated Azeri and Danish files
-
-2001/03/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: add fstab in the log
-
-	* interactive_gtk.pm: better default_size setting
-
-	* commands.pm: fix typo
-	add fstab in the log
-
-	* install_gtk.pm (test_mouse): ensure the test mouse is not too big
-
-2001/03/28  warly
-
-	* share/rpmsrate: add some commercial apps
-
-2001/03/27  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: added kill USR2 before main
-
-	* share/help.png: changed help button
-
-	* share/help.xpm: changed help
-
-	* tinyfirewall.pm: workaround to make it xork.
-
-2001/03/27  François Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: update boot image.
-
-	* Xconfigurator.pm: fixed mouse support for XF3, only one mouse supported
-	currently.
-
-2001/03/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/nfsmount.c: force 8192 bytes for nfs transfers
-
-2001/03/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/i18n_compssUsers, share/po/vi.po, share/po/fi.po,
-	share/po/br.po, share/po/DrakX.pot, share/po/ko.po, share/po/ja.po,
-	share/po/wa.po, share/po/de.po, share/po/id.po: Updated Vietnamese,
-	Indonesian, Japanese, Korean and Walloon files
-	changed i18n_compssUsers to make "path" i18n'able
-
-2001/03/27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: warnAboutNaughtyServers
-	(setPackages): default profiles selection to GNOME, KDE, CONFIG
-
-	* install_steps_interactive.pm: warnAboutNaughtyServers
-	(summary): fix displaying of printer configured
-
-	* pkgs.pm: warnAboutNaughtyServers
-
-	* install_steps_gtk.pm (installPackages): catch the no png file exception
-	(in case warly is dumb again)
-
-	* my_gtk.pm: try to fix displaying in draksec
-	(create_box_with_title): save the box_size in field "box_size"
-
-	* install2.pm, any.pm: remove use of Bastille. get back to the good state
-	we had :)
-
-	* interactive_gtk.pm: try to fix displaying in draksec
-
-	* share/rpmsrate: move back Bastille-Curses-module to CONFIG
-	  - cleanup LOCALES"zh_*": when there is LOCALES"zh_*", there is
-	LOCALES"zh"
-	  - raise WindowMaker
-	  - add xfce
-	  - am-utils is a server
-	  - raise some stuff in CONFIG to have stuff there
-	  - remove drakxtools from CONFIG (DrakConf requires drakxtools)
-	  - DrakConf from 5 to 4
-
-	* lang.pm (langsLANGUAGE): give the list of languages
-
-2001/03/27  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_steps_interactive.pm: change verbage on bootloader warning
-
-2001/03/27  siegel
-
-	* share/po/de.po: minor typo-fixes
-
-2001/03/27  dam's  <damien@mandrakesoft.com>
-
-	* share/help.png: changed help button
-
-	* share/help.xpm: changed help
-
-2001/03/27  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm, pkgs.pm: fixed too early erasing of old rpmlib db. now
-	postponed at end of install
-	and only if rpm-4.0 or above has been installed.
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: update boot image.
-
-	* Xconfigurator_consts.pm, mouse.pm, Xconfigurator.pm, Xconfig.pm: added
-	support for two mice (laptop). The second mice is generally PS/2 as
-	probe can says it is present.
-
-2001/03/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/nfsmount.c: force 8192 bytes for nfs transfers
-
-2001/03/27  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm, install2.pm: remove use of Bastille. get back to the good state
-	we had :)
-
-	* install_any.pm: warnAboutNaughtyServers
-	(setPackages): default profiles selection to GNOME, KDE, CONFIG
-
-	* share/rpmsrate: move back Bastille-Curses-module to CONFIG
-	  - cleanup LOCALES"zh_*": when there is LOCALES"zh_*", there is
-	LOCALES"zh"
-	  - raise WindowMaker
-	  - add xfce
-	  - am-utils is a server
-	  - raise some stuff in CONFIG to have stuff there
-	  - remove drakxtools from CONFIG (DrakConf requires drakxtools)
-	  - DrakConf from 5 to 4
-
-	* install_steps_interactive.pm: warnAboutNaughtyServers
-	(summary): fix displaying of printer configured
-
-	* lang.pm (langsLANGUAGE): give the list of languages
-
-	* pkgs.pm: warnAboutNaughtyServers
-
-	* install_steps_gtk.pm (installPackages): catch the no png file exception
-	(in case warly is dumb again)
-
-2001/03/27  siegel
-
-	* share/po/i18n_compssUsers: i18n group names
-
-	* share/po/de.po: minor typo-fixes
-	new german version
-
-2001/03/26  daouda
-
-	* share/rpmsrate: add mandrake_desk and rootfiles to SYSTEM (rpmsrate)
-
-2001/03/26  fcrozat
-
-	* share/rpmsrate: Install xscreensaver when installing GNOME
-
-2001/03/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: first attempt at pixelization of code (till's cups
-	patches)
-
-2001/03/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/wa.po: Updated Croatian, vietnamese and Walloon
-	files
-
-	* share/po/vi.po: Updated Croatian, vietnamese and Walloon files
-	Updated Portuguese, Swedish and Thai files
-
-	* share/po/pt.po, share/po/th.po, share/po/es.po, share/po/de.po,
-	share/po/sv.po: Updated Portuguese, Swedish and Thai files
-
-2001/03/25  Pixel  <pixel@mandrakesoft.com>
-
-	* http.pm (getFile): verify the return value of the server. If not 200
-	(aka Ok),
-	return undef
-
-	* install_steps_interactive.pm (configurePrinter): add Mesa-common for xpp
-	and libqtcups2 for kups in
-	pkg_install_if_requires_satisfied
-
-2001/03/25  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/25  fabman
-
-	* share/po/es.po: updated spanish .po file
-
-2001/03/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po: Updated Korean file
-
-	* share/po/sv.po: Updated Swedish file
-
-2001/03/25  Pixel  <pixel@mandrakesoft.com>
-
-	* http.pm (getFile): verify the return value of the server. If not 200
-	(aka Ok),
-	return undef
-
-	* install_steps_interactive.pm (configurePrinter): add Mesa-common for xpp
-	and libqtcups2 for kups in
-	pkg_install_if_requires_satisfied
-
-	* any.pm (ask_users): fix dead-loop
-
-	* bootloader.pm (suggest): add entry for nt
-
-2001/03/25  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/vi.po: Updated Vietnamese file
-
-2001/03/24  Pixel  <pixel@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: remove the "use common" which
-	is unneeded (and "member" of merge2pcitable
-	was clashing)
-
-	* any.pm (ask_users): when "Done" is pressed, do "Accept User" if a user
-	is given.
-
-	* install_steps.pm (addUser): disable_user_view (in kdm/gdm) if no users
-
-	* install_any.pm (disable_user_view): created, takes care of gdm too
-	(taken from msec)
-
-	* mouse.pm (detect): fix francois... uh, no too hard. easier to fix
-	francois's bugs ;pp
-
-	* timezone.pm (%l2t): fix for fuzzyChoice
-
-	* share/keyboards.tar.bz2: 
-	  - readding with -kb
-	  - fixing permissions on xmodmap.kr
-	remove before adding again with -kb
-
-	* modules.pm: have natsemi in network.img
-
-2001/03/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Azeri file
-
-2001/03/24  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm (detect): fix francois... uh, no too hard. easier to fix
-	francois's bugs ;pp
-
-	* timezone.pm (%l2t): fix for fuzzyChoice
-
-	* modules.pm: 
-	  - add missing modules (now in sync with pcitable)
-	  - add 'media' class
-	  - cleanup
-
-2001/03/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Azeri file
-
-2001/03/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (copy_advertising): fix escaping $f causing perl to
-	segfault :-(
-	(copy_advertising): handle i18n'ed advertising
-
-	* pkgs.pm: cleanup
-
-	* modules.pm: 
-	  - add missing modules (now in sync with pcitable)
-	  - add 'media' class
-	  - cleanup
-
-2001/03/24  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: corrected bad exited. reincorporated some ugly code,
-	need fixing
-
-2001/03/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (copy_advertising): handle i18n'ed advertising
-
-	* modules.pm (read_stage1_conf): cleanup parport stuff obsolote in kernel
-	2.4
-
-2001/03/23  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed screen id for Device to be present whenever the
-	same BusID is used.
-	added multiple tablet support (wacom), moved usb probe for mouse and
-	tablet
-	at the beginning.
-
-	* printerdrake.pm: Do not ask to configure a printer if standalone,
-	previously only for embended.
-
-	* Xconfig.pm: fixed typo for wacom.
-	added multiple tablet support (wacom), moved usb probe for mouse and
-	tablet
-	at the beginning.
-
-	* mouse.pm, detect_devices.pm, install_steps_gtk.pm, install2.pm: added
-	multiple tablet support (wacom), moved usb probe for mouse and tablet
-	at the beginning.
-
-2001/03/23  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_listf_no_check): fix the fix fix fix
-	(ask_from_listf_no_check): fix the fix fix
-
-	* common.pm (formatError): created
-
-	* network.pm (configureNetworkIntf): gray "IP address" and "Netmask" in
-	DHCP/BOOTP
-
-	* diskdrake.pm (try): format the error (no more "at line ...")
-	(Add2LVM): "new" was not i18n'ed
-
-	* install_steps_interactive.pm (exitInstall): no "cancel" button
-
-	* partition_table.pm: add Empty to bad_types
-
-	* fsedit.pm (change_type): When changing a partition type from ext2fs to
-	Linux RAID
-	(or LVM), the mount point should be removed.
-
-2001/03/23  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/23  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: corrected bad translation
-	correctedd typo
-	updated
-	code cleaning
-	tinyfirewall now works.
-
-	* Makefile.config: added tinyfirewall
-
-	* any.pm, mouse.pm: added /dev/modem in modem list selection
-
-	* standalone/drakxconf: added tinyfirewall entry
-
-	* standalone/tinyfirewall: added update code
-	updated wrapper to launch tinyfirewall in embedded mode
-
-	* netconnect.pm: added /dev/modem in modem list selection
-	netconnect doesn't write the file 1
-
-2001/03/23  fcrozat
-
-	* share/rpmsrate: nautilus-mozilla and xalf are installed by default in
-	GNOME
-	gmc is not installed by default in GNOME
-	gabber gaim are moved to instant messaging
-	gcombust in moved to GNOME CD burner
-	gtm is installed by GNOME/File transfer
-	mozilla is installed by default as www browser
-	galeon is installed by default as www browser for GNOME
-
-2001/03/23  François Pons  <fpons@mandrakesoft.com>
-
-	* tools/syncrpms: added size-stamp test to copy identical file in version,
-	release.
-
-	* Xconfig.pm: fixed typo for wacom.
-	added multiple tablet support (wacom), moved usb probe for mouse and
-	tablet
-	at the beginning.
-
-	* Xconfigurator.pm: added multiple tablet support (wacom), moved usb probe
-	for mouse and tablet
-	at the beginning.
-	fixed wrong usage of Screen keyword in Device section, should be present
-	and
-	reseted for any multi head card with only one BusID.
-
-	* mouse.pm, detect_devices.pm, install_steps_gtk.pm, install2.pm: added
-	multiple tablet support (wacom), moved usb probe for mouse and tablet
-	at the beginning.
-
-2001/03/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/es.po, share/po/de.po, share/po/fi.po: Added Vietnamese file
-	Updated Finnish file
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po,
-	share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
-	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Added Vietnamese file
-
-2001/03/23  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: ifix the dams stuff
-
-	* install_steps_interactive.pm (exitInstall): no "cancel" button
-
-	* share/po/i18n_compssUsers: fix for better compliance with po format
-
-	* netconnect.pm: ifix the dams stuff
-	cleanup and enable gzip'ed isdn.db
-
-	* Makefile: gzip ldetect-lst files
-
-	* modules.pm: add i810_audio (still need a script to add missing one and
-	keep in sync)
-
-	* bootloader.pm (suggest_floppy): don't add an entry for non-fd0 drives
-
-	* interactive.pm (ask_from_listf_no_check): fix the fix fix fix
-	(ask_from_listf_no_check): fix the fix fix
-	(ask_from_listf_no_check): fix the bad fix
-
-	* common.pm (formatError): created
-	(openFileMaybeCompressed, catMaybeCompressed): added
-	(getVarsFromSh): take care of comments
-
-	* network.pm (configureNetworkIntf): gray "IP address" and "Netmask" in
-	DHCP/BOOTP
-
-	* partition_table.pm: add Empty to bad_types
-
-	* mouse.pm (detect): never probe psaux (workaround for kernel/xfree bug)
-
-	* fsedit.pm (change_type): When changing a partition type from ext2fs to
-	Linux RAID
-	(or LVM), the mount point should be removed.
-
-	* detect_devices.pm (isUSBFDUDrive, usbfdus): removed, doesn't scale
-	(isFloppyOrHD): floppy type is 'fd', not 'floppy'
-	(stringlist): nicer (a la new lspcidrake)
-
-	* Xconfigurator.pm: enable use of gzip'ed Cards+, CardsNames and
-	MonitorsDB
-
-	* diskdrake.pm (try): format the error (no more "at line ...")
-	(Add2LVM): "new" was not i18n'ed
-
-2001/03/23  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mouse.pm, bootloader.pm: mods to create/move image, to /export for PPC,
-	use vmlinux for PPC
-	prepend of_dev to initrd stanza in yaboot.conf
-	add 1-button mouse for PPC
-
-2001/03/23  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/22  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* tools/i386/netboot/stage1.rtl8139, tools/i386/netboot/stage2.rtl8139:
-	Add 8139 grub stage.
-
-2001/03/22  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: corrected mapn
-
-	* standalone/draknet: removed use Data::Dumper
-
-	* netconnect.pm: removed mail informat oin
-	comment update
-
-	* tinyfirewall.pm: removed use Data::Dumper
-	working on tinyfirewall
-
-2001/03/22  fabman
-
-	* share/po/es.po: changed "swap" for "intercambio" in the spanish .po
-	files
-	updated DrakX, menudrake and urpmi es.po files
-
-2001/03/22  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed wrong access to undefined value promoted to
-	empty array reference.
-
-2001/03/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/probing.c, mdk-stage1/tools.h: 
-	  - fix detection of more than 3 scsi attached devices
-	  - cleaner code for cmp of ptr against static strings
-
-2001/03/22  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/mousedrake: remove test ugliness of dams
-
-	* c/Makefile.PL: no pcmcia_probe in drakxtools
-
-	* modules.pm (load_thiskind): indent as it should be
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): fix the message
-	which was uptodate only for
-	sparc :-(
-
-	* Xconfigurator.pm: no need for "use Data::Dumper;"
-
-2001/03/22  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* modules.pm: no imm,ppa PPC, scan mesh,mac53c94 scsi only, pmac should
-	have been mace
-
-2001/03/22  yduret
-
-	* bootlook.pm: mapn works tx dams
-	nmap
-	added mapn fun to reduce code.. testing it
-	added install of rpm
-	xpm  png files
-
-	* pixmaps/hori.png, pixmaps/gmon.png, pixmaps/tradi.png, pixmaps/hori.xpm,
-	pixmaps/verti.png, pixmaps/gmon.xpm, pixmaps/tradi.xpm,
-	pixmaps/verti.xpm: convert xpm to png
-
-2001/03/21  dam's  <damien@mandrakesoft.com>
-
-	* standalone/tinyfirewall, tinyfirewall.pm: new tinyfirewall conf tool
-
-	* netconnect.pm: corrected /etc/sysconfig/network-scripts/net_up.* bug
-
-2001/03/21  François Pons  <fpons@mandrakesoft.com>
-
-	* detect_devices.pm: added pci id reference.
-
-	* c/stuff.xs.pm: added support for pci id extraction.
-
-	* Xconfigurator.pm: fixed wrong XFree4 version reference.
-	fixed null string in monitor identifier.
-	added multi-head support in XFdrake.
-
-2001/03/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: honour embedded mode
-
-	* share/compssUsers: move NETWORKING_FILE (contains stuff for nfs
-	mounting..) from Internet
-	Station to Network Computer
-
-2001/03/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/de.po,
-	share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated
-	Croatian and Serbian files
-
-	* share/po/sp.po, share/po/sr.po: Updated Serbian files
-	Updated Croatian and Serbian files
-
-	* share/po/az.po: Updated Azeri file
-	Updated Croatian and Serbian files
-
-	* share/po/sk.po: Updated Azeri and Slovak files
-	Updated Croatian and Serbian files
-
-	* lang.pm: Added fields to charsets table holding info for mount
-	(iocharset and
-	codepage mount options)
-
-2001/03/21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (g_default_packages): nice warning if mount in vfat fails
-
-	* share/rpmsrate: move webmin to CONFIG
-	remove ipchains and iptables, raise gfcc
-
-	* docs/README: add cvs howto
-
-	* install_steps_interactive.pm (summary): fix
-
-	* detect_devices.pm: old code
-
-	* bootloader.pm (install_lilo): ensure labels don't contain spaces, lilo
-	doesn't like them
-	(add_kernel): cleanup
-	(suggest): make it work with kernel22-secure and no kernel22
-
-	* modules.pm (when_load): move the alias sound to when_load, don't check
-	ppc as it
-	could be used for non-ppc
-	(load_thiskind): fix pb causing imm,ppa,usb-storage to be tested for
-	every
-	load_thiskind, not only scsi one
-
-	* c/stuff.xs.pm (from_utf8): as pablo said...
-
-2001/03/21  siegel
-
-	* share/po/de.po: new german version
-	new german version
-
-2001/03/20  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (@drivers_by_category): if_ization
-	(load_thiskind): cleanup
-
-2001/03/21  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (add_kernel): cleanup
-	(suggest): make it work with kernel22-secure and no kernel22
-
-	* share/rpmsrate: remove ipchains and iptables, raise gfcc
-
-2001/03/20  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm: no wizard if warning
-
-2001/03/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix pcmcia functions only on x86
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-
-	* modules.pm (@drivers_by_category): if_ization
-	(load_thiskind): cleanup
-
-	* any.pm, install2.pm, share/rpmsrate: use bastille backend
-
-	* c/stuff.xs.pm, c/Makefile.PL: fix pcmcia functions only on x86
-
-	* install_steps.pm, install_any.pm: 
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-
-2001/03/20  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* modules.pm, install_steps_interactive.pm, any.pm: make_boot_img: add
-	routine for - PPC
-	any.pm: double "Append" entry in expert mode for yaboot.conf - PPC
-	install_steps_interactive: setup dmasound - PPC
-	modules.pm: load Mac hardware modules - PPC
-
-2001/03/20  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bug in reading resolv.conf, and changed chmod
-	for net_cnx_*
-
-	* interactive.pm: no wizard if warning
-
-	* standalone/draknet: added update after {dis}connecting
-
-2001/03/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* diskdrake.pm: fix formatting of raid
-
-2001/03/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: use bastille backend
-	  - add nautilus
-
-	* install_steps_interactive.pm: fix pcmcia functions only on x86
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-	(setupSCSI): don't pcmcia_probe if testing
-	  - tellAboutProprietaryModules moved to setupSCSI
-	  - miscellaneous step re-enabled, called Security
-	  - pcmcia_probe moved to setupSCSI, skipped in noauto
-
-	* any.pm: use bastille backend
-
-	* install2.pm: use bastille backend
-	  - tellAboutProprietaryModules moved to setupSCSI
-	  - miscellaneous step re-enabled, called Security
-	  - pcmcia_probe moved to setupSCSI, skipped in noauto
-	have pcmcia_probe in stage2 (for non pcmcia.img, stage1 doesn't give the
-	parameter any more)
-
-	* netconnect.pm (modem_detect_backend): cleanup
-
-	* c/stuff.xs.pm, c/Makefile.PL: fix pcmcia functions only on x86
-	have pcmcia_probe in stage2 (for non pcmcia.img, stage1 doesn't give the
-	parameter any more)
-
-	* Makefile: install cardmgr
-
-	* install_any.pm: 
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-	(setPackages): install usbd in case of usb
-
-	* install_steps.pm: 
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-
-2001/03/20  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* any.pm, netconnect.pm, detect_devices.pm: any.pm: enable module load PPC
-	detect_devices.pm: forgot to remove commented code after test
-	netconnect.pm: load macserial module for PPC
-
-2001/03/20  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet, netconnect.pm: improved connection windows, and
-	loading / saving of /etc/sysconfig/network-scripot/netècnx*
-
-2001/03/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: 
-	  - add nautilus
-
-	* install_any.pm (setPackages): install usbd in case of usb
-
-	* Makefile: install cardmgr
-
-2001/03/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* fsedit.pm: fix loopback appearing twice in format partition
-
-	* diskdrake.pm: fix "loopback" name of loopback tab in diskdrake
-
-2001/03/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po: updated korean file
-	Updated po files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: Updated po files
-
-2001/03/19  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (computeGroupSize): fix hacks, better hacks
-	(saveCompssUsers): fix
-
-	* install_steps_interactive.pm (chooseGroups):
-	  - make the computed size work
-	  - unselectAll when a profile is unselected
-
-	* interactive_gtk.pm (ask_from_entries_refW): better sizing in case of
-	scrolls
-
-2001/03/19  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c: stage1.c: fix for rescue image PPC
-
-2001/03/19  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corrected graphical layout for newbies
-
-	* netconnect.pm: added net_cnx_{up, down} save
-
-2001/03/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po: updated korean file
-	Updated po files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: Updated po files
-
-2001/03/19  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (computeGroupSize): fix hacks, better hacks
-	(saveCompssUsers): fix
-
-	* share/rpmsrate: 
-	  - add rxvt-CJK
-	  - exchange xterm and rxvt
-	  - move bc from SCIENCES to SYSTEM
-
-	* interactive_newt.pm (ask_from_entries_refW):
-	  - ensure the width is less than $width - 7 (in french and 80x25, the
-	treelist was too big)
-	  - if term is very big, use 10 lines instead of 5
-	  - if no button is asked, but one in any case otherwise it's buggy
-
-	* install_steps_interactive.pm (chooseGroups):
-	  - make the computed size work
-	  - unselectAll when a profile is unselected
-
-	* interactive.pm (ask_from_listf_no_check): fix fix
-	(ask_from_listf_no_check): fix the filtering of exceptions
-
-2001/03/19  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c: stage1.c: fix for rescue image PPC
-
-2001/03/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/lomount.h, mdk-stage1/lomount.c, mdk-stage1/disk.c: fix for
-	hd-install when you provide a not valid ISO (cd #2 for example)
-
-	* mdk-stage1/frontend.h, mdk-stage1/minilibc.h, mdk-stage1/stage1.h,
-	mdk-stage1/log.h: use some help with __attribute__
-
-2001/03/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/tree/etc/rc.sysinit: load sr_mod and sd_mod at startup
-
-	* mdk-stage1/Makefile.mkinitrd_helper, mdk-stage1/.cvsignore: sync
-
-	* mdk-stage1/stdio-frontend.c: handle left and right arrow keys, in
-	editing ask_from_entries in stdio mode
-
-	* mdk-stage1/pci-resource/Makefile: do not use marfiles for deps
-
-2001/03/17  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (write_langs): in case of empty %_install_langs, don't write it
-
-	* install_steps.pm (pkg_install_if_requires_satisfied): better logging
-
-	* share/rpmsrate: add gpm & evolution
-
-2001/03/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/insmod-busybox/utility.c: fix insmod calling realloc(0,0) to
-	work with dietlibc
-
-	* mdk-stage1/insmod-busybox/Makefile: also build standalone insmod-DIET
-	for testing purposes..
-
-	* mdk-stage1/mkinitrd_helper/Makefile: bump version to 1.0.1 for new
-	mkinitrd package release
-
-	* mdk-stage1/stdio-frontend.c: handle left and right arrow keys, in
-	editing ask_from_entries in stdio mode
-
-2001/03/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-
-	* share/keyboards.tar.bz2: Added a Korean keyboard, fixed bug in Japanese
-	keyboard
-
-	* keyboard.pm: Added choice of Korean keyboard
-
-2001/03/17  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (write_langs): in case of empty %_install_langs, don't write it
-
-	* install_steps.pm (pkg_install_if_requires_satisfied): better logging
-
-	* share/rpmsrate: add gpm & evolution
-
-2001/03/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/Makefile: refine deps
-
-	* mdk-stage1/mkinitrd_helper/mkinitrd_helper.c, mdk-stage1/Makefile,
-	mdk-stage1/mkinitrd_helper/Makefile: write down mkinitrd_helper
-
-	* mdk-stage1/insmod-busybox/insmod.c: force load
-
-2001/03/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (setPackages): set flag "TV" when bttv hardware is there
-
-	* share/compssUsers, share/rpmsrate: move out TV from VIDEO
-
-	* diskdrake.pm (Type): fix the code verifying size >32 for reiserfs
-
-	* modules.pm (write_conf): better logging
-
-	* c/stuff.xs.pm: add from_utf8
-
-	* c/stuff.pm (headerGetEntry): use from_utf8 on group, summary and
-	description
-
-2001/03/16  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* tools/ppc/magic, tools/ppc/mkhybrid-1.12b5.4, tools/ppc/convert,
-	tools/ppc/yaboot, tools/ppc/mapping: gi/tools/ppc/convert, magic,
-	mapping, mkhybrid-1.12b5.4, yaboot - re-add - my bad
-	gi/tools/ppc/convert, magic, mapping, mkhybrid-1.12b5.4, yaboot -
-	remove/re-add - did not use -kb switch - thx Pixel
-
-2001/03/15  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: SiS card are no more prefered for XF3.
-	added standalone support to prefer XF3 or XF4 to
-	keep current used server version.
-
-	* standalone/XFdrake: remove duplicate begin label.
-	take care of existing configuration.
-
-2001/03/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: skip dc395x_trm on stage1
-	dc395x_trm is back in 2.4
-
-	* share/compssUsers: try to enhance
-
-2001/03/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: updated Azeri file
-
-2001/03/15  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm, Xconfigurator.pm: andre@node1583e.a2000.nl says
-	this is not needed anymore :)
-
-2001/03/15  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* tools/ppc/magic, tools/ppc/convert, tools/ppc/iboot,
-	tools/ppc/mkINSTALLCD, tools/ppc/mkhybrid-1.12b5.4, tools/ppc/yaboot,
-	tools/ppc/mapping: gi/tools/ppc/convert, magic, mapping, mkINSTALLCD,
-	mkhybrid-1.12b5.4, yaboot: create PPC CD
-
-	* install_steps_interactive.pm, detect_devices.pm, bootloader.pm:
-	bootloader.pm, detect_devices.pm, install_steps_interactive.pm: changed
-	temporary file read/write per Pixel
-
-	* Xconfigurator.pm: force 1024x768 on Powerbook
-
-	* tools/ppc/README: README: README for creating PPC boot CD
-
-2001/03/14  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: changed label + profile before types..
-
-2001/03/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po,
-	share/po/i18n_compssUsers, share/po/DrakX.pot, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/Changelog, share/po/sk.po,
-	share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po:
-	corrected the script and updated po files
-
-2001/03/14  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssUsers: keep only one Development entry
-
-	* install_steps_gtk.pm, pkgs.pm: fix the compssUsers interpretation
-
-	* bootlook.pm: fix for perl2fcalls
-
-	* install_steps_interactive.pm (chooseGroups): disable the size display as
-	it is wrong (for the beta2)
-
-2001/03/14  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps_gtk.pm,
-	partition_table_mac.pm, bootloader.pm: fix bootstrap partition
-	creation/tracking
-	allow Xpmac to launch in 2 modes based on cmdline
-
-2001/03/14  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/14  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: changed label + profile before types..
-
-2001/03/14  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed unselect management of choice, propagate unselection
-	correctly to all
-	packages requiring unselected package.
-
-	* install_any.pm: use LD_LOADER when invoking parshedlist.
-
-2001/03/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po, share/po/nl.po: updated Norwegian file
-
-	* share/locales.tar.bz2, share/gconv.tar.bz2, share/list,
-	share/fonts.tar.bz2: new fonts and locale files
-
-	* share/po/ko.po: Fixed email of Korean translator
-	updated Korean file
-
-	* install_steps_interactive.pm, install_gtk.pm, lang.pm, keyboard.pm:
-	completed language list
-	completed language->keyboard guessing list
-	aesthetic changes to an English message (removed \n and let gtk+
-	do the formatting, it is nicer)
-
-	* share/po/az.po: Updated Azeri file
-
-2001/03/14  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm: fix the compssUsers interpretation
-	(readCompssUsers): change the key of compssUsers, added "label"
-	(computeGroupSize): fix bug
-	(computeGroupSize): fix logging
-
-	* share/gconv.tar.bz2: moved to share/list
-
-	* bootlook.pm: fix for perl2fcalls
-
-	* share/rpmsrate: CLIENT & SERVER is prohibited
-
-	* timezone.pm: 
-	  - add many timezones
-	  - defaults to GMT
-	  - verifier added
-
-	* install_steps_gtk.pm: fix the compssUsers interpretation
-	(choosePackagesTree): fix
-
-	* common.pm (bestMatchSentence, bestMatchSentence2): in wantarray, return
-	the number
-	of matched words/characters
-
-	* share/compssUsers: keep only one Development entry
-	CLIENT & SERVER is prohibited
-
-	* install_steps_interactive.pm (chooseGroups): disable the size display as
-	it is wrong (for the beta2)
-	(chooseGroups): add path for seperating groups, use "label" for the
-	group text
-
-	* Makefile: remove gconv
-
-2001/03/13  siegel
-
-	* share/po/de.po: Fixed typos.
-
-2001/03/13  siegel
-
-	* share/po/de.po: Fixed typos.
-
-2001/03/13  dam's  <damien@mandrakesoft.com>
-
-	* share/help.png: changed
-
-2001/03/13  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm, install_steps_gtk.pm: compss is deprecated. use compssUsers
-	for the tree
-
-	* standalone/drakgw: pixelization
-
-	* share/rpmsrate: HDF can't be at the beginning of the line or it will be
-	taken as a flag
-	moved icewm to SYSTEM with !KDE !GNOME
-
-	* pkgs.pm: compss is deprecated. use compssUsers for the tree
-	(readCompssUsers): get the "path"
-
-	* install_steps.pm: compss is deprecated. use compssUsers for the tree
-	renamef created and used
-
-	* detect_devices.pm (burners): don't use cdroms() which return scdX for
-	ide burners, and
-	isBurner don't use the same technique. so use get() and grep for type
-	"cdrom"
-
-	* install_any.pm: compss is deprecated. use compssUsers for the tree
-	(setPackages): set {compssUsersChoice}{PCMCIA} if hasPCMCIA
-	renamef created and used
-
-	* install_steps_interactive.pm: compss is deprecated. use compssUsers for
-	the tree
-	(chooseGroups): fix to get back the icons
-	(chooseGroups): size computed should work
-
-	* common.pm: renamef created and used
-
-2001/03/13  siegel
-
-	* share/po/de.po: new german translation
-
-2001/03/13  warly
-
-	* share/compssUsers: fix {W,w}orkstation
-	remove ^Server and ^Development
-
-2001/03/13  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakgw: pixelization
-
-	* install_steps_interactive.pm (chooseGroups): size computed should work
-
-	* share/rpmsrate: moved icewm to SYSTEM with !KDE !GNOME
-
-	* install_steps.pm, common.pm, install_any.pm: renamef created and used
-
-2001/03/12  dam's  <damien@mandrakesoft.com>
-
-	* Makefile: removed wizard pixmap from install
-
-	* pixmaps/wiz_internet.png, pixmaps/wiz_internet_left.png: updated
-	added pixmap for wizard
-
-	* my_gtk.pm: new wizard layout, with pixmaps.
-	added ugly workaround for ugly Hseparator
-
-	* share/step-red.png, share/step-orange.png, share/step-orange-click.png,
-	share/step-green-click.png, share/step-green.png, share/step-red-on.png,
-	share/step-orange-on.png, share/step-green-on.png,
-	share/step-green_s.png, share/step-red-click.png: removing bad png
-	files...
-
-	* share/help.png: new help button. blah
-
-	* install_any.pm: typo
-
-	* pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png: updated
-
-	* netconnect.pm: corrected askokcancel -> askyesorno
-
-	* interactive.pm: corrected bad okcanel in wizard mode
-
-	* install_steps_interactive.pm: added $::isInstall
-
-	* share/logo-mandrake_trans.png: new logo for other themes
-
-	* services.pm: removed use Data::Dumper
-	corrected bug in display
-
-2001/03/12  François Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm, lang.pm, commands.pm, detect_devices.pm, pkgs.pm,
-	live_install2: fixed live update between GLIBC 2.1 and GLIBC 2.2. should
-	work for other
-	combination but not tested. fixed locale usage and gtk environment
-	interaction (added LOCPATH, GCONV_PATH and GTK_EXE_PREFIX).
-	created LD_LOADER environment variable to keep track of right ELF loader
-	to be used for the GLIBC used by the live update. added internal PATH
-	to LD_LIBRARY_PATH as ELF loader only check this one and not PATH.
-
-2001/03/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: 
-	  - make it work as a wizard
-	  - make it work with iptables (kernel-2.4)
-
-	* modules.pm: reflect Jeff Garzik's answers to my questions on kernel@
-
-2001/03/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/DrakX.pot, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/bg.po, share/po/de.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/br.po, share/po/ca.po,
-	share/po/cy.po, share/po/uk.po, share/po/wa.po, share/po/da.po,
-	share/po/cs.po, share/po/zh_TW.Big5.po, share/po/af.po: Updated Basque
-	file
-
-2001/03/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): save the compssUsers flattened
-	for rpmdrake
-
-	* install_steps_interactive.pm (summary): remove 'clicked' (labels are
-	used)
-	put everything in %compssUsers, use field flags for the flags :)
-
-	* pkgs.pm (computeGroupSize): log what is found
-	(saveCompssUsers): make it work
-	(readCompssUsers): clean-up
-	(saveCompssUsers): created
-	put everything in %compssUsers, use field flags for the flags :)
-	(computeGroupSize): created
-
-	* share/rpmsrate: lower Zope (anyway Zope is not in main)
-
-	* fsedit.pm (hds): search for existing lvm in @hds *and* @lvms
-
-	* commands.pm (loadkeys): created
-
-	* install_any.pm (setPackages): don't readCompssUsers with $o->{packages}
-	(setPackages): kernel-secure doesn't exist anymore, use kernel22-secure.
-	don't use kernel-secure as a kernel-smp.
-	put everything in %compssUsers, use field flags for the flags :)
-	(setPackages): set compssUsersChoice "3D" if 3D enabled graphic card
-
-	* interactive_gtk.pm (ask_from_entries_refW): add $set for "label" entries
-	add "label" type
-
-	* share/compssUsers: change the path format
-
-	* detect_devices.pm (get_mac_model): fix for perl2fcalls
-
-	* interactive.pm: add "label" type
-
-2001/03/12  warly
-
-	* share/compssUsers: add some NETWORKING_* that were empty
-	dispach some DEVELOPMENT and SERVER to more appropriate groups
-	added path
-
-	* share/rpmsrate: add some NETWORKING_* that were empty
-	dispach some DEVELOPMENT and SERVER to more appropriate groups
-
-2001/03/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* ftp.pm: do not retry on 550 file unavailable
-
-2001/03/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (setPackages): set compssUsersChoice "3D" if 3D enabled
-	graphic card
-
-2001/03/11  dam's  <damien@mandrakesoft.com>
-
-	* services.pm: no more restart button
-
-2001/03/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* ftp.pm: do not retry on 550 file unavailable
-
-2001/03/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (summary): fix clicked empty handler
-
-	* share/rpmsrate: 
-	  - lower tftp-server
-	  - a lot of modifs (thanks to Prana)
-
-2001/03/10  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakxservices: embedded mode
-
-	* my_gtk.pm: added gtkset_border_width
-	typo again
-	typo
-	added gtkmove
-	added gtkset_modal and gtkappenditems
-
-	* services.pm: fixed big bug.
-	imajor improvement.
-	improved.
-
-2001/03/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated Korean file
-
-2001/03/09  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakxconf: added harddrake
-
-	* my_gtk.pm: applied gtkradio
-	created create_boxradio
-	in wizard mode : list -> radio buttons
-	added gtkradio
-
-	* bootlook.pm: workaround for the graphical layout.
-
-	* install_steps_gtk.pm: applied gtkradio
-	created create_boxradio
-	in wizard mode : list -> radio buttons
-
-	* printerdrake.pm: if embedded -> no first question
-
-	* interactive_gtk.pm: added tooltips to create_boxradio
-	applied gtkradio
-	created create_boxradio
-	in wizard mode : list -> radio buttons
-
-2001/03/09  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: a hell lot of modifications, mostly cleanup of
-	DEVELOPEMENT
-
-2001/03/09  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: keyboard mapping for PPC
-
-	* detect_devices.pm: routine to detect MacIntosh model code
-
-2001/03/09  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: added gtkradio
-
-	* standalone/draknet: changed graphical layout, expert mode
-
-2001/03/09  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (read_rpmsrate): handle the special case of packages requiring
-	locales-*,
-	adding the flag LOCALES"*" for them
-
-	* install_steps_interactive.pm (choosePackages): moved the log to
-	install2::choosePackages (to have it in
-	auto_installs too)
-
-	* install_any.pm (setPackages): set compssUsersChoice LOCALES"*"
-
-	* install2.pm (choosePackages): log groups choosen
-
-	* share/rpmsrate: a hell lot of modifications, mostly cleanup of
-	DEVELOPEMENT
-	  - chineese packages
-	  - move Aurora's to AURORA (DrakX take care of Aurora)
-
-	* install_steps_gtk.pm (remove_advertising): created
-
-2001/03/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: workaround kernel-2.4 bug with /dev/log
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* verify_c: fix the regexp
-
-	* detect_devices.pm (floppies): load module "floppy" before probing
-
-2001/03/08  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: applied if__
-
-2001/03/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: workaround kernel-2.4 bug with /dev/log
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* verify_c: fix the regexp
-
-	* share/rpmsrate: add i18n'ed packages
-
-	* detect_devices.pm (floppies): load module "floppy" before probing
-
-2001/03/08  dam's  <damien@mandrakesoft.com>
-
-	* common.pm: added if__
-
-	* netconnect.pm: applied if__
-
-2001/03/08  François Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm: avoid using e2fsck, else it abort by checking partition
-	size (which differs).
-	fix resize ext2 by using resize2fs.
-
-	* pkgs.pm: changed choice of package for selection.
-
-	* share/list: added resize2fs and dumpe2fs, removed ext2resize which is
-	replaced.
-
-2001/03/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c: do not segfault in dhcp stuff, when af_packet is not
-	honoured by kernel
-
-2001/03/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: advertising modifs
-	(setPackages): use burners instead of IDEburners
-
-	* bootloader.pm: cleanup
-
-	* interactive.pm (ask_from_listf_no_check): catch wizcancel and return
-	undef
-
-	* fs.pm (write_fstab): change again for 'none' checking the mount point
-	(write_fstab): special case for device ``none'' (which can be mounted
-	twice or more :)
-
-	* my_gtk.pm (_create_window): on delete_event, destroy the window and
-	raise wizcancel
-
-	* share/po/fr.po: fix bad translation
-
-	* share/rpmsrate: add i18n'ed packages
-	raise kdebase
-
-	* install2.pm, install_steps.pm, install_steps_gtk.pm: advertising modifs
-
-	* detect_devices.pm: cleanup
-	(isBurner): use syslog to detect scsi burners
-
-2001/03/08  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_steps_gtk.pm: encourage Xpmac to run in at least 16bpp
-
-	* partition_table_mac.pm: fixed variable referencing - thx Pixel
-
-2001/03/08  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad pci number -> string
-
-2001/03/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po, share/po/sr.po, share/po/sp.po, share/po/ca.po: updated
-	Bulgarian, Catalan and Serbian files
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (dev2grub): better error reporting
-
-	* tools/cvslog2changelog.pl (%users): add stew
-
-	* install_steps.pm (setupBootloaderBefore): aurora stupid renaming fix
-
-	* share/rpmsrate: raise kdebase
-	xcdroast is the best cd burner ui, raise it above others
-	lower some EDITORS
-	raise vim-X11
-	lower xrn, raise pan
-
-	* install_any.pm (setPackages): use burners instead of IDEburners
-	(setPackages): at least set BURNER for ide burners
-
-	* any.pm: cleanup
-
-	* install_steps_interactive.pm, install2.pm: re-add miscellaneous step,
-	but always hidden (aka automatic)
-
-	* detect_devices.pm (isBurner): use syslog to detect scsi burners
-
-	* fs.pm (write_fstab): special case for device ``none'' (which can be
-	mounted
-	twice or more :)
-
-	* tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: new versions
-	(without mem=)
-
-2001/03/08  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad pci number -> string
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: new versions
-	(without mem=)
-
-2001/03/07  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected default focus after detection
-	don't test adsl if net install
-
-2001/03/07  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (add_alias): remove the alias block-major-11 as it's
-	overriding the
-	default alias to sr_mod, and is uneeded with scsi_hostadapter being
-	added
-	to /etc/modules.conf
-
-	* share/rpmsrate: lower heartbeat
-
-2001/03/07  sbenedict
-
-	* help.pm: * perl-install/help.pm  - typo in yaboot help
-
-	* any.pm: * perl-install/any.pm - fixed two $l vs. @l references -
-	bootloader menu, need image/boot in rec mode PPC
-	CVl:
-	----------------------------------------------------------------------
-
-	* devices.pm: * perl-install/devices.pm - add adbmouse
-
-2001/03/07  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: not use common anymore, uses gtkpng, cosmetic chages
-
-2001/03/07  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm, bootloader.pm: fixed support for other kernel for
-	bootloader entries.
-	automatically add 2.2 entries for kernel22 (manage hack-kernel too).
-
-	* Xconfigurator.pm: remove 32 bit depth for S3 Trio3D card.
-
-	* pkgs.pm: added support for killing all child process of a transaction,
-	necessary to be
-	able to umount cdrom and eject it correctly.
-
-2001/03/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/fonts.tar.bz2: use gb16fs instead of gb16st
-
-	* modules.pm (add_alias): remove the alias block-major-11 as it's
-	overriding the
-	default alias to sr_mod, and is uneeded with scsi_hostadapter being
-	added
-	to /etc/modules.conf
-
-	* share/rpmsrate: lower heartbeat
-	lower Mesa's rate
-
-	* install2.pm (main): save $@ in $err so that it's not modified before
-	being used
-
-	* share/locales.tar.bz2: remove ending '/' in symlinks not pleasing
-	packdrake
-
-	* standalone/drakboot: make it please perl2fcalls
-
-2001/03/07  sbenedict
-
-	* bootloader.pm, Xconfigurator.pm: * perl-install/Xconfigurator.pm - force
-	XF4 for PPC in recommended mode
-	* perl-install/bootloader.pm - rework get_of_dev to work in live install
-
-	* install_steps_interactive.pm, any.pm, partition_table_mac.pm: *
-	perl-install/any.pm - change in partition_table_mac'xxx syntax
-	* perl-install/install_steps_interactive.pm - change in
-	partition_table_mac'xxx syntax
-	
-	* perl-install/partition_table_mac.pm - change in
-	partition_table_mac'xxx syntax
-
-2001/03/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po: Fixed French typos reported by tester
-
-2001/03/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/fonts.tar.bz2: use gb16fs instead of gb16st
-
-	* fsedit.pm: fix typo
-
-	* install2.pm (main): save $@ in $err so that it's not modified before
-	being used
-
-	* share/rpmsrate: lower Mesa's rate
-
-	* standalone/drakboot: make it please perl2fcalls
-
-2001/03/06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad %intf while savung
-	don't ask configuration if expert
-	now detecting adsl
-
-	* standalone/draknet: remmoved 'quiting appli' screen
-
-2001/03/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: fix save of automatic stage1 info for static network
-
-	* mdk-stage1/init.c: do not display from syslog msg's from RPM telling
-	that it
-	installed/removed some pkg's
-
-	* mdk-stage1/Makefile: fix includes for init
-
-2001/03/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, help.pm, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, standalone/draknet,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: corrected some typos, Updated Japanese
-	file
-
-2001/03/06  Pixel  <pixel@mandrakesoft.com>
-
-	* perl2fcalls: 
-	  - small fix for bootlook.pm
-	  - don't display reused
-
-	* detect_devices.pm (stringlist): if no text description, display ids
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): comment old code
-	(summary): fixes
-	(setupSCSI): cleanup
-	(summary): display sound/tv/isdn cards found
-
-	* fsedit.pm (check_mntpoint): don't allow LVM on / or /boot
-	(@suggestions_mntpoints): add /boot
-
-	* install_any.pm: hack to make perl2fcalls happy
-	(getHds): fix for no hd detected in newbie installs
-	(setPackages): s/snd-slot/sound-slot/
-
-	* install_steps_auto_install.pm (@graphical_steps): add
-	beforeInstallPackages so that advertisings are there
-
-	* install2.pm (setupSCSI): remove autoSCSI, cleanup
-
-	* http.pm, ftp.pm: don't use install_any
-
-	* modules.pm: add cciss
-
-	* partition_table.pm (add): create 3 primaries before creating an extended
-	if DAC960 (/dev/rd/*)
-	(add): max number of parts for rd, ida and cciss
-
-2001/03/06  yduret
-
-	* bootlook.pm: pixelisation
-
-2001/03/06  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm: corrected bad file search
-	corrected intf setting
-
-	* standalone/draknet: added enable/disable networking button.
-
-	* standalone/drakxconf: updated to be launched frome DrakConf if no
-	DISPLAY
-
-	* netconnect.pm: now detecting adsl
-	typo
-	better load_conf
-
-	* Xconfigurator.pm: cleaned png displaying
-
-	* common.pm: setinhash -> set_in_hash
-	added setinhash
-
-	* fs.pm: typo
-	use set_in_hash
-
-2001/03/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/cdrom.c: enable probing of all the CDROM drives in automatic
-	mode
-
-	* mdk-stage1/Makefile: fix includes for init
-
-2001/03/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: corrected some typos, Updated Japanese file
-	updated Lithuanian file
-
-	* help.pm, standalone/draknet: corrected some typos, Updated Japanese file
-
-2001/03/06  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, any.pm, Xconfigurator.pm: move inittab modifying to
-	any::runlevel
-
-	* partition_table.pm (add): max number of parts for rd, ida and cciss
-
-	* fs.pm, netconnect.pm, common.pm: set_in_hash is now put_in_hash
-
-	* diskdrake.pm (Create): pixelization
-
-	* fsedit.pm (hds): pixelization
-
-	* install_steps_auto_install.pm (@graphical_steps): add
-	beforeInstallPackages so that advertisings are there
-
-	* modules.pm: add cciss
-
-	* install2.pm (main): remove unloading vfat (not needed anymore with
-	mdk-stage1)
-
-2001/03/05  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: $mouse->{device} is set if it doesn't exists.
-
-	* Makefile: added pixmaps copying
-
-2001/03/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* netconnect.pm, bootlook.pm, help.pm: fixed English typos
-
-2001/03/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): use
-	generate_automatic_stage1_params
-
-	* c/stuff.xs.pm, my_gtk.pm: XSetInputFocus now done in perl-GTK
-
-	* install_any.pm (generate_automatic_stage1_params): replace
-	generate_ks_cfg
-
-2001/03/05  dam's  <damien@mandrakesoft.com>
-
-	* Makefile: added pixmaps copying
-
-	* standalone/draknet: required gtk only if needed, added redirection to
-	newt if needed
-
-	* netconnect.pm: $mouse->{device} is set if it doesn't exists.
-	corrected short circuit if network install
-	corrected bad end message,
-	added copying of resolv.conf & modules.conf
-
-	* install2.pm: moved askrootpasswd and adduser before network conf
-
-	* network.pm: removed old NS0 fetching. /etc/resolv.conf is read in
-	install2.pm now
-	removed setdefaultroute and sethostname
-
-2001/03/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated Latvian, Belarussian and Spanish files
-
-2001/03/05  Pixel  <pixel@mandrakesoft.com>
-
-	* lvm.pm (lv_create): fix typo
-
-	* bootloader.pm: add use devices
-	(install_grub): ensure the translated messages are not too big the hard
-	way
-
-	* install_any.pm (generate_automatic_stage1_params): replace
-	generate_ks_cfg
-	(install_urpmi): have "use hdlist ..." in any case
-
-	* my_gtk.pm: XSetInputFocus now done in perl-GTK
-	(_create_window): don't care about c::XSetInputFocus not existing
-
-	* any.pm (setupBootloader): pixelization
-	(setupBootloader): fix call to get_append
-
-	* interactive.pm (vnew): cleanup
-
-	* common.pm (salt): cleanup
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): use
-	generate_automatic_stage1_params
-
-	* c/stuff.xs.pm: XSetInputFocus now done in perl-GTK
-
-	* c/Makefile.PL: compile fix
-
-	* diskdrake.pm (create_buttons4partitions_): fix for displaying LVM
-
-	* Xconfigurator.pm (xtest): use external xtest if standalone
-
-	* install2.pm (main): remove unloading vfat (not needed anymore with
-	mdk-stage1)
-
-2001/03/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	diskdrake.pm, share/po/af.po: updated po files
-
-2001/03/04  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Add2LVM): fix bug (causing empty list), make cancel work
-
-	* share/rpmsrate: 
-	  - remove autologin
-	  - move X11R6-contrib to DEVELOPEMENT and lower rate
-
-2001/03/04  stew   <sbenedict@mandrakesoft.com>
-
-	* any.pm - changes to enable yaboot configuration for PPC
-
-	* diskdrake.pm, fs.pm, partition_table.pm isBootstrap -> isAppleBootstrap
-
-	* install_steps_interactive.pm - auto-add Apple Bootstrap - PPC
-
-2001/03/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, fsedit.pm, lvm.pm, standalone/diskdrake,
-	install_interactive.pm, install2.pm: small fixes for LVM
-
-	* diskdrake.pm: don't default the LVM name to 'pp' ;pp
-	small fixes for LVM
-
-2001/03/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: small fixes for LVM
-	(doPartitionDisksAfter): small adaptation for LVMs
-	use run_or_die
-
-	* fsedit.pm: small fixes for LVM
-	(hds): detect LVMs and return them
-	(add): handling of LVMs
-	(@partitions_signatures): add new magic of reiserfs
-
-	* bootloader.pm: use run_or_die
-
-	* run_program.pm (run_or_die, rooted_or_die): created
-
-	* install_steps_interactive.pm: cleanup
-
-	* install_any.pm (getHds): handle LVMs. $o->{lvms} contain them
-	(setPackages): ask for installation of package lvm when needed
-	(suggest_mount_points, find_root_parts): take $fstab as arg instead of
-	$hds
-
-	* install2.pm: small fixes for LVM
-	(formatPartitions): call vgscan if needed when / is mounted
-
-	* devices.pm (make): better caller in error
-
-	* share/list: add progs for LVM handling
-
-	* install_interactive.pm: small fixes for LVM
-
-	* diskdrake.pm: small fixes for LVM
-	  - addition of drive to notebook cleaned
-	  - various clean-up
-	  - handling of LVMs
-
-	* standalone/diskdrake: small fixes for LVM
-	small adaptation
-
-	* lvm.pm: small fixes for LVM
-	creation
-
-	* partition_table.pm: add isLVMBased
-
-2001/03/02  stew   <sbenedict@mandrakesoft.com>
-
-	* commands.pm - fdisk locks up machine on report_bug - replace with pdisk PPC
-
-	* install_steps.pm - no bootfloppy, added yaboot.conf - PPC
-
-	* install_interactive.pm - pdisk vs. fdisk - PPC
-
-	* bootloader.pm - added code to create yaboot.conf, run ybin - vmlinux vs. vmlinuz
-
-2001/03/02  stew   <sbenedict@mandrakesoft.com>
-
-	* c/smp.c -stanza for PPC
-	
-	* detect_devices.pm - added code for MO devices
-
-	* help.pm - help information for yaboot - PPC
-
-	* partition_table.pm - PPC mods
-
-	* partition_table_mac.pm - PPC mods 
-
-	* modules.pm - PPC mods - parallel port not used
-
-	* diskdrake.pm - PPC mods - display like pdisk
-
-	* install2.pm - PPC mod - no bootdisk
-
-	* fs.pm - bootstrap partition - PPC
-	
-2001/02/27  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: pop up a dialog to quit X when accepting
-	configuration
-
-2001/02/27  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_raw.pm (@MBR_signatures): add yet another grub signature
-
-	* devices.pm (entry): add fd0H1440 and fd1H1440
-
-	* bootloader.pm (mkbootdisk): fix for mkbootdisk using fd0H1440. Must be
-	created
-
-2001/02/26  dam's  <damien@mandrakesoft.com>
-
-	* Makefile.drakxtools, pixmaps/hori.xpm, pixmaps/tradi.xpm,
-	pixmaps/eth_card_mini.xpm, pixmaps/verti.xpm: new pixmap policy
-
-	* Makefile: typo
-	new pixmap policy
-
-	* bootlook.pm: typo
-	new pixmap policy
-	need to be merged with bootloader
-
-	* standalone/draknet: reincluded Gtk + init Gtk
-	thiskind -> thiskind_backend
-	new pixmap policy
-
-	* standalone/drakboot: short-circuit to bootlook for the moment.
-
-2001/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po,
-	share/po/i18n_compssUsers, share/po/DrakX.pot, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: Fixed i18n_compssUsers
-	script to produce a correct pot file
-	Updated Estonian and Walloon files
-
-	* bootlook.pm: changed I_() to _() so xgettext cna find the translatable
-	strings
-
-2001/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakgw: pixelization
-
-	* install_steps.pm: remove unneeded "use install_interactive"
-
-	* install_steps_gtk.pm (copy_advertising): fix changing for
-	advertising_images
-
-2001/02/26  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: should correct bad resolv.conf when swithcinf in
-	standalone embedded mode. Not Certified
-	fixed standalone edition
-	corrected wizard mode.
-
-	* Makefile.drakxtools, Makefile, pixmaps/eth_card_mini.xpm: new pixmap
-	policy
-
-	* standalone/draknet: new pixmap policy
-	fixed standalone edition
-
-	* bootlook.pm: need to be merged with bootloader
-
-	* interactive_gtk.pm: if wizard, show the button
-
-	* standalone/drakboot: short-circuit to bootlook for the moment.
-
-2001/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (if_): fix for use in scalar context
-
-	* install_steps_interactive.pm (summary): translate mouse description
-
-	* install_steps.pm: remove unneeded "use install_interactive"
-
-	* install_steps_gtk.pm (copy_advertising): fix changing for
-	advertising_images
-
-2001/02/26  warly
-
-	* share/compssUsers, share/rpmsrate: remove some packages
-
-2001/02/26  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: if wizard, show the button
-
-	* netconnect.pm: corrected wizard mode.
-
-2001/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (if_): fix for use in scalar context
-
-	* install_steps_interactive.pm (summary): translate mouse description
-
-2001/02/25  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake-Firewall.xpm, share/logo-mandrake.xpm: changed logo.
-
-	* netconnect.pm: profile handling.
-	profile handling
-	corrected wizard.
-
-	* standalone/draknet: profile handling.
-	profile handling
-
-	* install_steps_interactive.pm: updated
-
-2001/02/25  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): move the load_deps before all the loadO's
-
-	* install_any.pm (g_auto_install): have formatMountPartitions graphical if
-	$graphical
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): use "timeout 1"
-	for replay
-
-	* interactive_gtk.pm (ask_from_entries_refW): ensure "advanced" lists
-	center the chosen value
-
-2001/02/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, install2.pm: move writing to config files from
-	install2::selectKeyboard to install_steps
-
-	* share/list, Makefile, tools/i386/mkreiserfs: for now, have mkreiserfs in
-	the CVS since the current cooker version is too recent
-
-	* commands.pm (more): handle 'q' to quit
-
-2001/02/24  Pixel  <pixel@mandrakesoft.com>
-
-	* c/Makefile (stuff): fix the fix's fix :'-(
-
-	* detect_devices.pm (pci_probe): fix to clean the log
-
-	* install_steps_interactive.pm (setRootPassword): NIS server must be
-	editable
-
-2001/02/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (g_auto_install): handle $replay flag. It means a 'not
-	fully automated install'.
-
-	* install_steps_auto_install.pm (@graphical_steps): specify which step
-	should be interactive
-
-	* c/Makefile (stuff.xs): exporting C_RPM and C_DRAKX is needed
-
-	* install_steps.pm (afterInstallPackages): no kdm UserView in NIS
-	(configurePrinter): if_'ization
-
-	* install_steps_interactive.pm (exitInstall): ask wether Replay or
-	Automated
-	(generateAutoInstFloppy): handle $replay flag. It means a 'not fully
-	automated install'.
-	(summary): nicer mouse name
-
-2001/02/23  dam's  <damien@mandrakesoft.com>
-
-	* network.pm, standalone/draknet, netconnect.pm, my_gtk.pm: new wizard
-	layout, no use gtk in draknet, minor bugfixes
-
-2001/02/23  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added accessor the rpmsrate data of packages.
-	avoid rebuilding the database for oem, rpm db is assumed to be fine.
-
-	* rescue/make_rescue_img: removed kernel_reread program.
-
-	* rescue/tree/etc/oem: removed server from selection.
-	added mutli CD support to OEM (NFS/DVD transparent)
-	fixed selection of package now select much more than before.
-	fixed root partition size set to the minimum.
-
-2001/02/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: move xterm to SYSTEM
-
-2001/02/23  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: move the 'use my_gtk' in 'require my_gtk' and only if
-	needed
-
-	* install_steps_auto_install.pm (@graphical_steps): specify which step
-	should be interactive
-
-	* c/stuff.xs.pm: hack for macroporcessing in term.h
-	use C_DRAKX
-
-	* install_steps.pm (afterInstallPackages): no kdm UserView in NIS
-	(configurePrinter): if_'ization
-
-	* share/rpmsrate: add packages installed on demand by DrakX. they are
-	specifically flagged
-	or flagged 'INSTALL'
-
-	* perl2fcalls: handling of ``package''->import(``what to import'')
-
-	* interactive.pm (vnew): use /usr/X11R6/bin/xtest instead of c::Xtest
-
-	* Makefile (tar-drakxtools): C_RPM and C_DRAKX set to 0
-
-	* install_any.pm (g_auto_install): handle $replay flag. It means a 'not
-	fully automated install'.
-
-	* c/Makefile.PL: use C_DRAKX
-
-	* pkgs.pm (setSelectedFromCompssList): fix the fix
-
-	* c/Makefile (stuff.xs): exporting C_RPM and C_DRAKX is needed
-	add setting C_DRAKX to 1 by default
-
-	* install_steps_interactive.pm (exitInstall): ask wether Replay or
-	Automated
-	(generateAutoInstFloppy): handle $replay flag. It means a 'not fully
-	automated install'.
-	(summary): nicer mouse name
-
-2001/02/23  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_entries_refW): double clicking on list
-	means 'Ok'
-
-	* pkgs.pm (setSelectedFromCompssList): fix sillyness
-
-2001/02/22  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corected infinite loop
-
-2001/02/22  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: minor cleanup to edit partition size more easily.
-	brand new version written in perl, support repartitionning on the fly of
-	the
-	hard disk and resize of already present FAT partition.
-
-	* rescue/list.i386, rescue/list, rescue/Makefile: make rescue build a bit
-	more cleaner (added dependancy).
-	added missing file for rescue to enable new oem install.
-
-2001/02/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/insmod-modutils/include/elf_hppa64.h,
-	mdk-stage1/insmod-modutils/util/alias.h,
-	mdk-stage1/insmod-modutils/util/xstrcat.c,
-	mdk-stage1/insmod-modutils/util/gzfiles.c,
-	mdk-stage1/insmod-modutils/include/elf_arm.h,
-	mdk-stage1/insmod-modutils/util/sys_qm.c,
-	mdk-stage1/insmod-modutils/util/modstat.c,
-	mdk-stage1/insmod-modutils/obj/obj_sparc.c,
-	mdk-stage1/insmod-modutils/include/elf_m68k.h,
-	mdk-stage1/insmod-modutils/Makefile,
-	mdk-stage1/insmod-modutils/util/xstrdup.c,
-	mdk-stage1/insmod-modutils/obj/obj_arm.c,
-	mdk-stage1/insmod-modutils/obj/obj_m68k.c,
-	mdk-stage1/insmod-modutils/obj/obj_hppa64.c,
-	mdk-stage1/insmod-modutils/include/elf_sparc64.h,
-	mdk-stage1/insmod-modutils/util/sys_dm.c,
-	mdk-stage1/insmod-modutils/include/elf_s390.h,
-	mdk-stage1/insmod-modutils/obj/obj_s390.c,
-	mdk-stage1/insmod-modutils/util/xmalloc.c,
-	mdk-stage1/insmod-modutils/util/xsystem.c, mdk-stage1/insmod.h,
-	mdk-stage1/insmod-modutils/util/xftw.c,
-	mdk-stage1/insmod-modutils/include/elf_i386.h,
-	mdk-stage1/insmod-modutils/util/sys_gks.c,
-	mdk-stage1/insmod-modutils/util/snap_shot.c,
-	mdk-stage1/insmod-modutils/obj/obj_i386.c, mdk-stage1/modules.c,
-	mdk-stage1/stage1.c, mdk-stage1/insmod-modutils/include/obj.h,
-	mdk-stage1/insmod-modutils/include/elf_ppc.h,
-	mdk-stage1/insmod-modutils/obj/obj_reloc.c,
-	mdk-stage1/insmod-modutils/include/elf_sparc.h,
-	mdk-stage1/insmod-modutils/util/sys_nim.c,
-	mdk-stage1/insmod-modutils/obj/obj_ppc.c, mdk-stage1/Makefile,
-	mdk-stage1/insmod-modutils/include/elf_hppa.h,
-	mdk-stage1/insmod-busybox/insmod.c,
-	mdk-stage1/insmod-modutils/util/meta_expand.c,
-	mdk-stage1/insmod-modutils/util/arch64.c,
-	mdk-stage1/insmod-modutils/obj/obj_load.c,
-	mdk-stage1/insmod-modutils/obj/obj_hppa.c,
-	mdk-stage1/insmod-busybox/insmod.h,
-	mdk-stage1/insmod-modutils/include/elf_ia64.h,
-	mdk-stage1/insmod-modutils/obj/obj_ia64.c,
-	mdk-stage1/insmod-modutils/obj/obj_sparc64.c,
-	mdk-stage1/insmod-modutils/include/elf_mips.h,
-	mdk-stage1/insmod-modutils/include/module.h,
-	mdk-stage1/insmod-modutils/obj/obj_mips.c,
-	mdk-stage1/insmod-modutils/util/sys_cm.c,
-	mdk-stage1/insmod-modutils/obj/obj_alpha.c,
-	mdk-stage1/insmod-modutils/include/kerneld.h,
-	mdk-stage1/insmod-modutils/util/xrealloc.c,
-	mdk-stage1/insmod-modutils/obj/Makefile,
-	mdk-stage1/insmod-modutils/insmod-frontend.c,
-	mdk-stage1/insmod-modutils/obj/obj_common.c,
-	mdk-stage1/insmod-modutils/include/modstat.h,
-	mdk-stage1/insmod-modutils/util/Makefile,
-	mdk-stage1/insmod-modutils/include/config.h,
-	mdk-stage1/insmod-modutils/util/logger.c,
-	mdk-stage1/insmod-modutils/obj/obj_kallsyms.c,
-	mdk-stage1/Makefile.common, mdk-stage1/insmod-modutils/include/util.h,
-	mdk-stage1/insmod-modutils/util/config.c,
-	mdk-stage1/insmod-modutils/include/version.h,
-	mdk-stage1/insmod-modutils/include/kallsyms.h,
-	mdk-stage1/insmod-modutils/include/elf_alpha.h,
-	mdk-stage1/insmod-modutils/util/sys_oim.c,
-	mdk-stage1/insmod-modutils/insmod.c: use modutils for non Intel arch's
-
-2001/02/22  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (write_fstab): clean-up, $fstab takes precedence over @to_add, but
-	not
-	over existing /etc/fstab. Fix some stupid stuff
-
-	* modules.pm, commands.pm: call /usr/bin/insmod_ with full path
-
-	* install2.pm (main): don't set a special $remote_path PATH for
-	postInstallNonRooted
-	(otherwise install's modprobe is not used, and you can't "modprobe
-	vfat",
-	even if "/usr/bin/modprobe vfat" doesn't work because insmod_ is not
-	found.
-
-	* my_gtk.pm (create_box_with_title): disallow focusing on text if it is
-	non-scrolled
-
-2001/02/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/minilibc.c,
-	mdk-stage1/init-libc-headers.h,
-	mdk-stage1/dietlibc/include/sys/select.h, mdk-stage1/Makefile,
-	mdk-stage1/init.c, mdk-stage1/minilibc.h,
-	mdk-stage1/dietlibc/include/unistd.h,
-	mdk-stage1/dietlibc/include/sys/socket.h,
-	mdk-stage1/dietlibc/include/signal.h: have "init" compiled against
-	dietlibc (rather than glibc) on non-Intel arch's
-
-2001/02/22  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm: $graphical is now a module variable. Can
-	be changed from everywhere
-
-	* fs.pm (write_fstab): clean-up, $fstab takes precedence over @to_add, but
-	not
-	over existing /etc/fstab. Fix some stupid stuff
-
-	* modules.pm, commands.pm: call /usr/bin/insmod_ with full path
-
-	* install2.pm (main): don't set a special $remote_path PATH for
-	postInstallNonRooted
-	(otherwise install's modprobe is not used, and you can't "modprobe
-	vfat",
-	even if "/usr/bin/modprobe vfat" doesn't work because insmod_ is not
-	found.
-
-	* my_gtk.pm (create_box_with_title): disallow focusing on text if it is
-	non-scrolled
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): fix setting
-	type to 'list' in
-	case of format. should be only set if type is unset
-	(ask_from_entries_refH_powered_normalize): if list+format then type is
-	'list', combo not accepted (hacky?)
-
-	* interactive_gtk.pm (ask_from_entries_refW): if no button wanted, don't
-	call create_okcancel
-
-2001/02/22  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): if list+format
-	then type is
-	'list', combo not accepted (hacky?)
-
-	* install_steps_auto_install.pm: $graphical is now a module variable. Can
-	be changed from everywhere
-
-	* interactive_gtk.pm (ask_from_entries_refW): if no button wanted, don't
-	call create_okcancel
-
-2001/02/21  dam's  <damien@mandrakesoft.com>
-
-	* network.pm, netconnect.pm: netconnect recode, wizard compatible.
-	network.pm modified for wizard. Still need work for ask_yesorno,
-	ask_okcancel. +debugging of course
-
-	* standalone/draknet: updated (don't remember what)
-
-2001/02/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c, mdk-stage1/Makefile,
-	mdk-stage1/dietlibc/lib/vprintf.c, mdk-stage1/dietlibc/lib/vfprintf.c,
-	mdk-stage1/minilibc.h, mdk-stage1/minilibc.c,
-	mdk-stage1/init-libc-headers.h: 
-	  - fix "init" on ppc (do not use minilibc on non-i386 arch's)
-	  - fix segfault of dietlibc-linked apps (broken va_stuff in dietlibc)
-	  - cleanup of "init"
-
-	* mdk-stage1/init.c: 
-	  - fix "init" on ppc (do not use minilibc on non-i386 arch's)
-	  - fix segfault of dietlibc-linked apps (broken va_stuff in dietlibc)
-	  - cleanup of "init"
-	fix up syslog logging stuff
-
-2001/02/21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (generateAutoInstFloppy): removed
-
-	* install_any.pm (g_auto_install): use selected_leaves for
-	default_packages to reduce the
-	list of packages (aka cleanup auto_inst.cfg)
-	(g_default_packages): created
-
-	* install_steps_interactive.pm (exitInstall): add generateAutoInstFloppy
-	and g_default_packages calls in
-	advanced
-
-	* netconnect.pm, partition_table.pm, fsedit.pm: cleanup Data::Dumper use
-
-	* pkgs.pm (selected_leaves): created
-
-	* install2.pm (main): do postInstallNonRooted before postInstall (so that
-	'modprobe
-	vfat' can be done in postInstallNonRooted and used in postInstall)
-	  - move the loadO of patch/defcfg after loading modules.dep
-	  - generateAutoInstFloppy is no more a step
-	  - removed use Data::Dumper
-
-2001/02/21  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* share/rpmsrate: Add iputils to SYSTEM.
-
-2001/02/21  dam's  <damien@mandrakesoft.com>
-
-	* docs/wizard.doc: putain de doc de merde pout petite qui est trop débile
-
-	* interactive.pm, my_gtk.pm: corrected wizard mode.
-
-2001/02/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/TECH-INFOS: sync doc with disk automatic installs
-
-	* mdk-stage1/disk.c: add support for automatic (ex-kickstart) in disk
-	installs
-
-2001/02/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2001/02/21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (generateAutoInstFloppy): removed
-
-	* install_any.pm (g_auto_install): use selected_leaves for
-	default_packages to reduce the
-	list of packages (aka cleanup auto_inst.cfg)
-	(g_default_packages): created
-
-	* install_steps_interactive.pm (exitInstall): add generateAutoInstFloppy
-	and g_default_packages calls in
-	advanced
-
-	* netconnect.pm, partition_table.pm, fsedit.pm: cleanup Data::Dumper use
-
-	* pkgs.pm (selected_leaves): created
-
-	* install2.pm (main): do postInstallNonRooted before postInstall (so that
-	'modprobe
-	vfat' can be done in postInstallNonRooted and used in postInstall)
-	  - move the loadO of patch/defcfg after loading modules.dep
-	  - generateAutoInstFloppy is no more a step
-	  - removed use Data::Dumper
-
-2001/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* printerdrake.pm: fix typo
-
-	* install_steps.pm, install_steps_gtk.pm, install_any.pm: better
-	advertising support
-
-2001/02/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/url.h, mdk-stage1/url.c, mdk-stage1/network.c: for HTTP
-	installs, make use of Content-Length when available, to display
-	progressbar
-
-2001/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: various
-	  - pcmcia_config.patch now in tools (no more in install which is
-	removed)
-	  - copy xpm's (until step icons work with png's)
-	  - transform group icons in pngs
-
-	* modules.pm, class_discard.pm, my_gtk.pm, Xconfigurator.pm: various
-
-	* tools/pcmcia_config.patch: pcmcia_config.patch now here
-
-	* printerdrake.pm: fix typo
-
-	* install_any.pm, install_steps.pm, install_steps_gtk.pm: better
-	advertising support
-
-2001/02/20  warly
-
-	* share/compssUsers, share/rpmsrate, share/compssList: update rpmsrate
-
-2001/02/20  François Pons  <fpons@mandrakesoft.com>
-
-	* c/stuff.xs.pm, live_install, pkgs.pm, live_install2: added RPMRC_FILE
-	env variable to choose rpmrc file for rpmlib used
-	by DrakX, neccessary for live update from a 7.2 or older.
-	Check that if something goes wrong with rebuilddb, avoid removing
-	old rpm-3 db files.
-	Make sure live_install can start from top directory too.
-
-2001/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: various
-	  - pcmcia_config.patch now in tools (no more in install which is
-	removed)
-	  - copy xpm's (until step icons work with png's)
-	  - transform group icons in pngs
-
-	* modules.pm, class_discard.pm: various
-
-	* tools/pcmcia_config.patch: pcmcia_config.patch now here
-
-	* my_gtk.pm, Xconfigurator.pm: various
-	major move. now ask_from_list returns false when canceled (it doesn't
-	die 'ask_from_list canceled' anymore)
-
-	* interactive_gtk.pm, standalone/mousedrake, install_steps_interactive.pm,
-	netconnect.pm, standalone/keyboarddrake, install2.pm, interactive.pm,
-	any.pm, printerdrake.pm, diskdrake.pm: major move. now ask_from_list
-	returns false when canceled (it doesn't die 'ask_from_list canceled'
-	anymore)
-
-2001/02/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c: try to print errno's stuff when symlink to
-	/tmp/stage2 failed
-
-	* mdk-stage1/dhcp.c: ARP_MAX_RETRIES: s/5/4
-
-2001/02/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated Estonian file
-
-2001/02/19  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_listf_no_check): die 'ask_from_list cancel' on
-	cancel
-
-	* my_gtk.pm (create_packtable): don't use attach_raw anymore (was a
-	sillyme)
-
-2001/02/18  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: typo
-	make fbastok happy about button placement.
-	little improvements.
-
-2001/02/16  dam's  <damien@mandrakesoft.com>
-
-	* install_gtk.pm: corrected xpm mask
-
-	* network.pm: wireless eth support corrected.
-
-	* share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm,
-	share/step-green-click.xpm, share/step-green.xpm, share/step-red-on.xpm,
-	share/step-orange-on.xpm, share/step-green-on.xpm,
-	share/step-red-click.xpm: re added these xpm files against display mask
-	pb.
-
-2001/02/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: better ansi colors
-
-	* mdk-stage1/dhcp.c: comply with glibc-2.2.2 more strict headers
-
-	* mdk-stage1/stdio-frontend.c: display more nicely when there is a long
-	list to choose from (1, 2 or 4 columns)
-
-2001/02/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/TECH-INFOS, mdk-stage1/README: update doc
-
-2001/02/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: updated Azeri file
-
-2001/02/15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): fix i_images
-
-	* fsedit.pm (suggestions_mntpoint): fix
-
-2001/02/15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): fix i_images
-	(installPackages): traktolpilization and advertising
-
-	* Makefile (get_needed_files): copy png files instead of xpm's
-
-	* fsedit.pm (suggestions_mntpoint): fix
-
-	* my_gtk.pm (gtkcreate_png): add error message, syntax cleanup
-
-	* share/list: add GdkImlib stuff
-
-	* perl2fcalls: add Gtk::Gdk::ImlibImage
-
-	* install2.pm (main): set SHARE_PATH to /export/Mandrake/mdkinst/usr/share
-	if it exists
-
-2001/02/15  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm, any.pm, install_gtk.pm, install_steps_interactive.pm,
-	install_steps_gtk.pm, interactive_gtk.pm: added png support. Need to
-	test the faces2xpm stuff.
-
-	* share/step-orange-click.xpm, share/rpm-selected.xpm,
-	share/step-green-click.xpm, share/step-green.xpm, share/rpm-base.xpm,
-	share/ftin.xpm, share/step-orange-on.xpm, share/ftout.xpm,
-	share/step-red-click.xpm, share/step-green-on.xpm,
-	share/rpm-unselected.xpm, share/step-red.xpm, share/step-orange.xpm,
-	share/reload.xpm, share/rpm-semiselected.xpm,
-	share/logo-mandrake-Desktop.xpm, share/rpm-installed.xpm,
-	share/step-red-on.xpm: removed, png are used instead.
-
-	* standalone/draknet: updated internet and added eth conf
-
-	* share/help.xpm, share/logo-mandrake.xpm: removed, png are used instead.
-	added png images
-
-	* share/step-red.png, share/step-orange.png, share/reload.png,
-	share/logo-mandrake.png, share/rpm-semiselected.png,
-	share/logo-mandrake-Desktop.png, share/rpm-installed.png,
-	share/logo-mandrake_sav.png, share/step-red-on.png, share/help_sav.png,
-	share/rpm-selected.png, share/step-orange-click.png,
-	share/step-green-click.png, share/step-green.png, share/rpm-base.png,
-	share/logo-mandrake2.png, share/ftin.png, share/help.png,
-	share/step-orange-on.png, share/step-green-on.png, share/ftout.png,
-	share/step-red-click.png, share/step-green_s.png, share/themes-mdk.rc,
-	share/rpm-unselected.png: added png images
-
-2001/02/15  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile (get_needed_files): copy png files instead of xpm's
-
-	* install2.pm (main): set SHARE_PATH to /export/Mandrake/mdkinst/usr/share
-	if it exists
-	(selectKeyboard): give clicked as parameter
-
-	* my_gtk.pm (gtkcreate_png): add error message, syntax cleanup
-
-	* fsedit.pm (suggestions_mntpoint): fix typo
-
-	* share/list: add GdkImlib stuff
-
-	* perl2fcalls: add Gtk::Gdk::ImlibImage
-
-	* install_steps_interactive.pm (summary): better message for i18n
-
-	* install_steps_gtk.pm (installPackages): traktolpilization and
-	advertising
-
-2001/02/14  dam's  <damien@mandrakesoft.com>
-
-	* network.pm, standalone/draknet: wireless updated
-
-	* share/help.xpm, share/themes-mdk.rc, share/logo-mandrake.xpm: valentin
-	theme :)
-
-2001/02/14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): add user in group usb
-
-2001/02/14  dam's  <damien@mandrakesoft.com>
-
-	* share/themes-mdk.rc: valentin theme :)
-	added drawing theme section
-
-	* network.pm: wireless updated
-	updated wireless eth support
-
-	* standalone/draknet: wireless updated
-
-	* share/help.xpm, share/logo-mandrake.xpm: valentin theme :)
-
-2001/02/13  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: network con initiated in draknet.
-	netconnect improvement.
-	typo
-
-	* network.pm: typo
-	corrected domainname setting
-
-	* standalone/draknet: network con initiated in draknet.
-	netconnect improvement.
-
-2001/02/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/frontend.h, mdk-stage1/network.h,
-	mdk-stage1/stdio-frontend.c, mdk-stage1/dhcp.c, mdk-stage1/automatic.c,
-	mdk-stage1/newt-frontend.c, mdk-stage1/automatic.h, mdk-stage1/disk.c,
-	mdk-stage1/network.c: write down Magic Callback (tm) for static ip stuff
-
-	* mdk-stage1/modules.c: ask for modules parameters everytime in expert
-	mode, to avoid wrong autodetections in certain cases
-	  - better log of nfs mount errors
-	  - don't insmod modules already present (important for bzip2 slowness)
-
-	* mdk-stage1/cdrom.c: better error msg thx to mcdtg
-
-	* mdk-stage1/mount.c, mdk-stage1/nfsmount.c: 
-	  - better log of nfs mount errors
-	  - don't insmod modules already present (important for bzip2 slowness)
-
-	* mdk-stage1/stage1.c, mdk-stage1/init.c: use exit code 66 for rescue
-	better console messages at startup
-
-2001/02/13  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: profile handling updated
-
-	* network.pm: typo
-	corrected domainname setting
-
-	* netconnect.pm: finished load_conf
-
-2001/02/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/make_rescue_img, rescue/list: include libs for hostname resolving
-
-	* mdk-stage1/stage1.c, mdk-stage1/init.c: better console messages at
-	startup
-
-	* mdk-stage1/tools.c: 
-	  - save /etc/resolv.conf for rescue
-
-2001/02/13  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectKeyboard): can be automatic only in
-	non-expert
-
-	* any.pm: md5 now done via crypt
-
-	* install_steps.pm (exitInstall): catch exception of output report.bug
-	(for gc)
-
-2001/02/13  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectKeyboard): can be automatic only in
-	non-expert
-
-	* tools/cvslog2changelog.pl: fix for gc & fpons
-	fix for fredl broken CVS
-
-	* any.pm: md5 now done via crypt
-
-	* install_steps.pm (exitInstall): catch exception of output report.bug
-	(for gc)
-
-2001/02/13  dam's  <damien@mandrakesoft.com>
-
-	* network.pm: experimental wireless eth support. Not tested
-
-2001/02/13  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/cvslog2changelog.pl: fix for gc & fpons
-	fix for fredl broken CVS
-
-	* c/stuff.xs.pm, c/Makefile.PL, c/md5.h, c/md5_crypt.c, c/md5.c: md5 can
-	be done via crypt of glibc, so remove all this
-
-2001/02/13  dam's  <damien@mandrakesoft.com>
-
-	* any.pm: merging difference
-
-	* netconnect.pm: corrected profile handling
-
-	* network.pm: experimental wireless eth support. Not tested
-
-2001/02/12  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/addchangelog.pl: log more than mdk-stage1 and perl-install (added
-	docs, rescue, tools)
-
-2001/02/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/probing.c: do not close un unbound socket!!
-
-	* c/stuff.xs.pm: close socket everytime in hasNetDevice
-
-	* mdk-stage1/Makefile: tag it 8.0beta instead of 8.0, to avoid future
-	potential confusions
-
-	* modules.pm: re include some network modules
-
-2001/02/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/list: fix vi trouble
-	  - add lspci, lspcidrake, vim-minimal
-	  - better /etc/issue
-	  - better PS1
-	  - write embryonic tool (installation of detected drivers according to
-	pci cards)
-
-	* rescue/aliases, rescue/tree/etc/issue: fix vi trouble
-
-	* rescue/list.i386, rescue/make_rescue_img, rescue/drvinst: 
-	  - add lspci, lspcidrake, vim-minimal
-	  - better /etc/issue
-	  - better PS1
-	  - write embryonic tool (installation of detected drivers according to
-	pci cards)
-
-2001/02/12  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/drvinst: pixelization
-
-	* docs/README: fix doc about Mandrake/base/compss
-
-	* install_steps_gtk.pm (choosePackagesTree): non first choice packages are
-	in "Other".
-
-	* install_interactive.pm, any.pm, fsedit.pm, diskdrake.pm: auto_allocate
-	partitions choice modified. diskdrake in expert asks what kind
-	of auto_allocation is wanted, others choose 'simple' in
-	%fsedit::suggestions
-
-	* install2.pm: auto_allocate partitions choice modified. diskdrake in
-	expert asks what kind
-	of auto_allocation is wanted, others choose 'simple' in
-	%fsedit::suggestions
-	(main): gc has done it again! /tmp/conf.modules is now
-	/etc/modules.conf,
-	so load both to keep compatibility.
-
-	* my_gtk.pm: cleanup (remove ask_from_list and _ask_from_list)
-
-	* interactive_gtk.pm (ask_from_entries_refW): use
-	$common->{advanced_label}
-	(create_ctree): add keyboard shortcuts
-	(create_clist): moveto only if row_is_visible
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): advanced_label
-	defaults to
-	_("Advanced")
-
-	* tools/addchangelog.pl: log more than mdk-stage1 and perl-install (added
-	docs, rescue, tools)
-
-	* install_steps_interactive.pm (configurePrinter): cleanup,
-	pkg_install_if_requires_satisfied('xpp',
-	'kups') only if a printer is configured (for the case when _("Would you
-	like to configure a printer?") is answered no)
-
-	* rescue/tree/etc/rc.sysinit: add floppy module for 2.4
-
-2001/02/10  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/draknet, standalone/XFdrake: corrected pkgs_install given
-
-	* install_any.pm: add preConfigureTimezone
-	add step summary. remove steps configureTimezone and configurePrinter
-
-	* install_interactive.pm: cleanup
-
-	* standalone/keyboarddrake, share/keymaps_generate, keyboard.pm: 
-	  - lang2keyboards handle keyboard percentages
-	  - xmodmaps now named keyboards
-
-	* install_steps_interactive.pm: add step summary. remove steps
-	configureTimezone and configurePrinter, modify selectKeyboard
-
-	* install2.pm, timezone.pm, install_steps.pm: add step summary. remove
-	steps configureTimezone and configurePrinter
-
-	* netconnect.pm: corrected back $install call
-
-2001/02/10  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/keyboarddrake, share/keymaps_generate, keyboard.pm: 
-	  - lang2keyboards handle keyboard percentages
-	  - xmodmaps now named keyboards
-
-	* install_steps_interactive.pm: add step summary. remove steps
-	configureTimezone and configurePrinter, modify selectKeyboard
-
-	* standalone/draknet, standalone/XFdrake: corrected pkgs_install given
-
-	* install_any.pm: add preConfigureTimezone
-	add step summary. remove steps configureTimezone and configurePrinter
-
-	* install2.pm, timezone.pm, install_steps.pm: add step summary. remove
-	steps configureTimezone and configurePrinter
-
-	* install_interactive.pm: cleanup
-
-	* netconnect.pm: corrected back $install call
-
-2001/02/09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm, install2.pm,
-	timezone.pm: configureTimezone doesn't take parameter
-	/etc/sysconfig/clock
-
-2001/02/09  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm, interactive.pm, interactive_newt.pm: add button
-	handling, quite weird behaviour though cuz of newt sillyness
-
-	* install2.pm: configureTimezone doesn't take parameter
-	/etc/sysconfig/clock
-	(main): have compatibility with old stage1 (rhimage -> image)
-	(formatPartitions):
-	s|etc/sysconfig/consoletrans|etc/sysconfig/console/consoletrans|
-	as it should now be (see lang.pm 1.143)
-
-	* install_steps.pm, install_steps_interactive.pm, timezone.pm:
-	configureTimezone doesn't take parameter /etc/sysconfig/clock
-
-2001/02/09  siegel
-
-	* share/po/de.po: new german version
-
-2001/02/08  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakgw: implemented or updated embedded mode
-	added embedded and (ugly) wizard mode.
-
-	* standalone/printerdrake, standalone/mousedrake, standalone/diskdrake,
-	standalone/keyboarddrake: implemented or updated embedded mode
-
-	* standalone/draknet: implemented or updated embedded mode
-	added embedded mode
-
-	* standalone/XFdrake: implemented or updated embedded mode
-	corrected compilation bug.
-
-	* standalone/drakboot: implemented or updated embedded mode
-	updated embedded mode. Should work, not tested in real world
-
-	* netconnect.pm: removed testing wizard instruction
-
-2001/02/08  François Pons  <fpons@mandrakesoft.com>
-
-	* ftp.pm: fixed wrong URLPREFIX formation if no user given.
-
-	* standalone/XFdrake: fix the previous changelog wich was wrong (bad
-	spelling),
-	added a char in comment to allow a new release (thanks to pixel :-)
-	make sure SHARE_PATH is set.
-	fixed SHARE_PATH to make sure it is setted.
-
-	* Xconfigurator.pm: added DRI experimental support (sis, radeon). Prefer
-	XF3 for SiS card.
-
-	* pkgs.pm: fixed problem for updating hdlist after going back to partition
-	step.
-
-2001/02/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c, mdk-stage1/config-stage1.h, mdk-stage1/network.c:
-	better memory detection (from wonderful drakx)
-
-2001/02/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated Norwegian file
-
-2001/02/08  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (availableRamMB): cleanup
-
-	* standalone.pm, standalone/XFdrake: make sure SHARE_PATH is set now in
-	standalone
-
-2001/02/07  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed unknown package ARRAY... and locales selection
-	according to langs.
-
-	* modules.pm: fixed module name without text for SCSI configuration
-	dialog, add log.
-
-2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/probing.h, mdk-stage1/stage1.h,
-	mdk-stage1/tools.c, mdk-stage1/automatic.c, mdk-stage1/init.c,
-	mdk-stage1/probing.c, mdk-stage1/automatic.h, mdk-stage1/modules.c,
-	mdk-stage1/network.c: 
-	  - use description of network cards when you have to select between
-	interfaces; has accuracy even in the case of multiple interface for a
-	given kernel module
-	  - write down a small "shell" to change parameters on the fly (needs
-	compile option SPAWN_INTERACTIVE)
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): better fix for getting
-	max install size.
-	(choosePackages): call setSelectedFromCompssList with empty
-	compssUsersChoice meaning max
-
-	* common.pm (formatXiB): more precise for cases like 1_234_000 -> 1.2GB
-
-2001/02/07  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed unknown package ARRAY... and locales selection
-	according to langs.
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): better fix for getting
-	max install size.
-	(choosePackages): call setSelectedFromCompssList with empty
-	compssUsersChoice meaning max
-
-	* common.pm (formatXiB): more precise for cases like 1_234_000 -> 1.2GB
-
-2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
-	8.0
-
-	* mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
-	hostname+domain
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(
-
-	* detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)
-
-	* install_steps_interactive.pm (miscellaneous): remove asking about
-	numlock and hd optimizations,
-	deprecates it (aka don't do anything)
-
-	* Xconfigurator.pm (main): don't need isLaptop anymore, use
-	detect_devices::hasPCMCIA
-
-	* bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
-	value of memsize
-	if given
-	(install): save CLEAN_TMP in sysconfig/system
-	(get_append, add_append): get or set an append value
-	(has_profiles, set_profiles): get or add an entry office for profiles,
-	also add prof=Home in
-	the default entry
-
-	* any.pm (setupBootloader): take care of profiles and memsize
-	(facesnames): only display icons capitalized. This goes along the new
-	mandrake_desk where capitalized named faces are the new one. [a-z].*
-	icons
-	being only kept for compatibility. (in case no capitalized icons
-	available
-	display everything (compatibility with old mandrake_desk)
-
-	* standalone/draknet, standalone/XFdrake: don't pass isLaptop
-
-	* install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
-	taking care of
-	profiles and memsize. Now in any & bootloader
-	(miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
-	$o->{miscellaneous} anymore
-
-	* install_gtk.pm (create_help_window, create_logo_window): use gtkxpm
-
-	* netconnect.pm: remove the $isLaptop unused from a hell lot of functions
-
-	* install2.pm (@installSteps): remove miscellaneous
-	(main): don't remove pcmcia modules anymore (not there anymore), remove
-	/sbin/stage1
-
-2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
-	8.0
-
-	* mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
-	hostname+domain
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(
-
-	* detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)
-
-	* install_steps_interactive.pm (miscellaneous): remove asking about
-	numlock and hd optimizations,
-	deprecates it (aka don't do anything)
-
-	* Xconfigurator.pm (main): don't need isLaptop anymore, use
-	detect_devices::hasPCMCIA
-
-	* bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
-	value of memsize
-	if given
-	(install): save CLEAN_TMP in sysconfig/system
-	(get_append, add_append): get or set an append value
-	(has_profiles, set_profiles): get or add an entry office for profiles,
-	also add prof=Home in
-	the default entry
-
-	* any.pm (setupBootloader): take care of profiles and memsize
-	(facesnames): only display icons capitalized. This goes along the new
-	mandrake_desk where capitalized named faces are the new one. [a-z].*
-	icons
-	being only kept for compatibility. (in case no capitalized icons
-	available
-	display everything (compatibility with old mandrake_desk)
-
-	* standalone/draknet, standalone/XFdrake: don't pass isLaptop
-
-	* install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
-	taking care of
-	profiles and memsize. Now in any & bootloader
-	(miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
-	$o->{miscellaneous} anymore
-
-	* install_gtk.pm (create_help_window, create_logo_window): use gtkxpm
-
-	* netconnect.pm: remove the $isLaptop unused from a hell lot of functions
-
-	* install2.pm (@installSteps): remove miscellaneous
-	(main): don't remove pcmcia modules anymore (not there anymore), remove
-	/sbin/stage1
-
-2001/02/07  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* share/rpmsrate: Add usbd to SYSTEM.
-
-2001/02/07  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: updated wizard mode, intro and other stuff
-
-	* interactive_gtk.pm, interactive.pm, my_gtk.pm: updated wizard mode
-
-	* share/logo-mandrake.xpm: new logo
-
-2001/02/07  François Pons  <fpons@mandrakesoft.com>
-
-	* http.pm, ftp.pm, pkgs.pm: now fully fixed ftp connection (and http too)
-	caused by forked DrakX
-	with latent ftp connection.
-
-2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
-	8.0
-
-	* mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
-	hostname+domain
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(
-
-	* detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)
-
-	* install_steps_interactive.pm (miscellaneous): remove asking about
-	numlock and hd optimizations,
-	deprecates it (aka don't do anything)
-
-	* Xconfigurator.pm (main): don't need isLaptop anymore, use
-	detect_devices::hasPCMCIA
-
-	* bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
-	value of memsize
-	if given
-	(install): save CLEAN_TMP in sysconfig/system
-	(get_append, add_append): get or set an append value
-	(has_profiles, set_profiles): get or add an entry office for profiles,
-	also add prof=Home in
-	the default entry
-
-	* any.pm (setupBootloader): take care of profiles and memsize
-	(facesnames): only display icons capitalized. This goes along the new
-	mandrake_desk where capitalized named faces are the new one. [a-z].*
-	icons
-	being only kept for compatibility. (in case no capitalized icons
-	available
-	display everything (compatibility with old mandrake_desk)
-
-	* standalone/draknet, standalone/XFdrake: don't pass isLaptop
-
-	* install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
-	taking care of
-	profiles and memsize. Now in any & bootloader
-	(miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
-	$o->{miscellaneous} anymore
-
-	* install_gtk.pm (create_help_window, create_logo_window): use gtkxpm
-
-	* netconnect.pm: remove the $isLaptop unused from a hell lot of functions
-
-	* install2.pm (@installSteps): remove miscellaneous
-	(main): don't remove pcmcia modules anymore (not there anymore), remove
-	/sbin/stage1
-
-2001/02/07  siegel
-
-	* share/po/de.po: new german version
-
-2001/02/06  François Pons  <fpons@mandrakesoft.com>
-
-	* ftp.pm: reworked ftp behaviour a bit for cooperative connection (avoid
-	opening
-	and closing connection too fast for each transaction). There seems
-	to be some problem for retrieving twice a package, this cause huge pause
-	between each transaction, the best is to avoid them so ?
-
-2001/02/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/stage1.c,
-	mdk-stage1/init.c, mdk-stage1/newt-frontend.c, mdk-stage1/network.c,
-	mdk-stage1/modules.c, mdk-stage1/disk.c: 
-	  - slighty change the message when exiting successfully from install,
-	to not mess with abnormal termination
-	  - get back dialog for hostname and domain in case of unable to guess
-	domain
-	  - try to resolve DNS if self-ip can't resolve, to guess domain
-	  - remember entries so that when there is a problem you don't have to
-	re-enter everything (ncurses sucking stuff in case of stdio-frontend..)
-	  - use larger buffer for list_directory since in /dev there can be
-	*many* files
-
-2001/02/05  dam's  <damien@mandrakesoft.com>
-
-	* Makefile.drakxtools, Makefile: added wizard.rc handling in Makfiles.
-
-	* standalone/draknet: added infos recovering.
-
-	* netconnect.pm: added load_conf() to recover saved infos from conffile.
-
-2001/02/05  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: removed abusive white char.
-	updated to use urpmi new format (change fakemedium to better label)
-	fixed frame buffer usage if not enabled (installation of Aurora)
-	clean up and remove unused code.
-
-	* ftp.pm: rebuild URLPREFIX as stage1 does not provide it anymore.
-
-	* pkgs.pm: updated to use urpmi new format (change fakemedium to better
-	label)
-
-	* Xconfigurator.pm: Removed Device3Dfx as it is no more.
-
-	* install_steps.pm: fixed frame buffer usage if not enabled (installation
-	of Aurora)
-	clean up and remove unused code.
-
-2001/02/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/list: updated list of gconv modules
-
-2001/02/05  Pixel  <pixel@mandrakesoft.com>
-
-	* commands.pm (head_tail): fix usage
-
-	* interactive_gtk.pm (create_ctree): node_moveto done only if
-	node_is_visible is not full
-
-2001/02/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/mar/mar-frontend.c: fix bug when creating marfiles with
-	file-not-found in args
-
-2001/02/04  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_newt.pm: fix adaptation to the terminal size, should now
-	work in 80x25
-
-	* Xconfigurator.pm (monitorConfiguration): better handling of auto_install
-
-	* install_steps_interactive.pm (choosePackages): don't call
-	chooseSizeToInstall even with experts
-
-	* install_steps_gtk.pm (charsetChanged): re-create steps window
-
-2001/02/03  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm, standalone/draknet, netconnect.pm: corrected module.conf
-	update, net conf saving, and no wizard by default.
-
-2001/02/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2001/02/03  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): ease use of {X}{type} in
-	auto_installs
-
-	* install_steps_gtk.pm (charsetChanged): created, takes care of setting to
-	the right charset the windows
-
-	* install_steps_interactive.pm (selectLanguage): call charsetChanged
-
-	* share/rpmsrate: fix ``LOCALES "zh_CN"'' with ``LOCALES"zh_CN"''
-	move ftp to SYSTEM so that it is installed
-
-	* Makefile: install cardmgr
-
-	* modules.pm (configure_pcmcia): cleanup
-
-2001/02/03  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): ease use of {X}{type} in
-	auto_installs
-
-	* install_steps_gtk.pm (charsetChanged): created, takes care of setting to
-	the right charset the windows
-
-	* install_steps_interactive.pm (selectLanguage): call charsetChanged
-
-	* share/rpmsrate: fix ``LOCALES "zh_CN"'' with ``LOCALES"zh_CN"''
-	move ftp to SYSTEM so that it is installed
-
-	* Makefile: install cardmgr
-
-	* modules.pm (configure_pcmcia): cleanup
-
-2001/02/02  dam's  <damien@mandrakesoft.com>
-
-	* share/wizard.rc: added rc file for wizard mode
-
-2001/02/02  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): better default for DDC probe
-	fails and
-	auto_install and not provided any info about the monitor
-
-	* my_gtk.pm (gtkcreate_xpm): error handling with error message
-
-	* share/rpmsrate: all GNOME and KDE moved out of GRAPHICAL_DESKTOP
-
-	* install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in
-	/etc/sysconfig/i18n
-
-	* mdk-stage1/disk.c (try_with_device): bloody guillaume changed
-	/tmp/hdimage to /tmp/disk without even
-	telling, changing it back as i don't see any good reason for the move.
-
-	* install_any.pm (setPackages): in auto_installs, default to all groups
-	chosen, unless
-	compssUsersChoice exist. Won't change anything unless compssListLevel is
-	used of course
-
-	* Xconfigurator_consts.pm: add low_default_monitor for default of
-	auto_installs
-
-	* interactive_gtk.pm (ask_from_entries_refW): use gtkxpm
-
-	* Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm,
-	diskdrake.pm: using the new formatXiB
-
-	* detect_devices.pm (getCompaqSmartArray): adapted getCompaqSmartArray to
-	the fact that kernel
-	2.4 uses /proc/driver/array instead of /proc/array. Also adapted the
-	regexp now that ida/c0d0p? is no more at the beginning of the line.
-	(get): cleanup, remove hasIDE hasSCSI...
-
-	* common.pm (formatXiB): created, format a number in human readable format
-
-2001/02/02  Pixel  <pixel@mandrakesoft.com>
-
-	* mdk-stage1/disk.c (try_with_device): bloody guillaume changed
-	/tmp/hdimage to /tmp/disk without even
-	telling, changing it back as i don't see any good reason for the move.
-
-2001/02/02  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm, standalone/draknet, netconnect.pm, my_gtk.pm,
-	standalone/diskdrake: recoded wizard mode
-	corrected some stuff.
-	trying not to break draknet for cooker snapshot
-
-2001/02/02  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): better default for DDC probe
-	fails and
-	auto_install and not provided any info about the monitor
-
-	* install_any.pm (setPackages): in auto_installs, default to all groups
-	chosen, unless
-	compssUsersChoice exist. Won't change anything unless compssListLevel is
-	used of course
-
-	* share/locales.tar.bz2: yet another LC_NUMERIC, seems like the previous i
-	chose was glibc-2.1 :-(
-	this one en_US and seems all right!
-
-	* Xconfigurator_consts.pm: add low_default_monitor for default of
-	auto_installs
-
-	* Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm,
-	diskdrake.pm: using the new formatXiB
-
-	* install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in
-	/etc/sysconfig/i18n
-
-	* common.pm (formatXiB): created, format a number in human readable format
-
-	* mdk-stage1/disk.c (try_with_device): bloody guillaume changed
-	/tmp/hdimage to /tmp/disk without even
-	telling, changing it back as i don't see any good reason for the move.
-
-2001/02/01  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: new draknet snapshot. Still unuseable
-
-	* interactive_gtk.pm, netconnect.pm, my_gtk.pm: updated embedded mode in
-	install.
-
-2001/01/31  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corected translation and conflict.
-
-2001/01/31  François Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm: added missing die if modprobe failed on live upgrade.
-
-	* pkgs.pm: added rpmrebuilddb directory cleaning before, remove old rpm
-	file
-	if everything has been successfull.
-
-	* install_steps.pm: changed to clean selection for non expert as used for
-	group selection
-	because it is not cleaned, need better solution TODO.
-
-2001/01/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* standalone/draknet: Fixed English typos (in English you DON'T PUT SPACES
-	BEFORE COLON (:);
-	and it is "Profile" and not "Profil")
-	CV:
-	----------------------------------------------------------------------
-
-2001/01/31  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackagesTree): created, simple
-	ask_many_from_list to choose
-	individual packages
-	(choosePackages): log for debug
-	(choosePackages): don't ask to install in beginner. Max is chosen
-	(setRootPassword): help not based on installClass being server or not
-	(selectInstallClass): remove installClass choice (was
-	normal/devel/server)
-	(chooseGroups): fix for individual package selection flag
-
-	* netconnect.pm (get_net_device): more cleanup syntax
-	(get_net_device): cleanup syntax
-
-	* install_steps.pm (selectLanguage): warning for debug
-	(miscellaneousBefore): don't use installClass to decide to use
-	supermount
-	or not. Choice is done on $::corporate. Can't say "no supermount in
-	server
-	installs" anymore
-	(selectInstallClass): emptied
-	(setupSCSI): don't configure PCMCIA if there is no PCMCIA
-
-	* install_any.pm (g_auto_install): installClass removed
-	(setPackages): do not preselect compssUsers entries
-
-	* install2.pm (main): don't set installClass=normal meta_class desktop
-	(deprecated)
-	(miscellaneous): TYPE= removed (was installClass)
-	(selectInstallClass): don't set $o->{partitions}. diskdrake will have to
-	ask in a set of possibilities
-	($o): replace fclass by fbeginner and fexpert
-	($o): default security level to 2 since it can't be based on
-	installClass (deprecated)
-
-	* install_steps_gtk.pm: restore window size for time being
-
-	* pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate
-
-	* Xconfigurator.pm (main): better error message for auto_install failing
-
-	* interactive.pm (ask_many_from_list): fix sorting
-
-	* any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by
-	drakx. Still
-	need finding the guilty
-
-2001/01/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: more kbd corrections
-	fixed soem keybopard values
-
-2001/01/31  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackagesTree): created, simple
-	ask_many_from_list to choose
-	individual packages
-	(choosePackages): log for debug
-	(choosePackages): don't ask to install in beginner. Max is chosen
-	(setRootPassword): help not based on installClass being server or not
-	(selectInstallClass): remove installClass choice (was
-	normal/devel/server)
-	(chooseGroups): fix for individual package selection flag
-
-	* install_steps.pm (selectLanguage): warning for debug
-	(miscellaneousBefore): don't use installClass to decide to use
-	supermount
-	or not. Choice is done on $::corporate. Can't say "no supermount in
-	server
-	installs" anymore
-	(selectInstallClass): emptied
-	(setupSCSI): don't configure PCMCIA if there is no PCMCIA
-
-	* install_any.pm (g_auto_install): installClass removed
-	(setPackages): do not preselect compssUsers entries
-
-	* install2.pm (main): don't set installClass=normal meta_class desktop
-	(deprecated)
-	(miscellaneous): TYPE= removed (was installClass)
-	(selectInstallClass): don't set $o->{partitions}. diskdrake will have to
-	ask in a set of possibilities
-	($o): replace fclass by fbeginner and fexpert
-	($o): default security level to 2 since it can't be based on
-	installClass (deprecated)
-
-	* install_steps_gtk.pm: restore window size for time being
-
-	* pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate
-
-	* Xconfigurator.pm (main): better error message for auto_install failing
-
-	* interactive.pm (ask_many_from_list): fix sorting
-
-	* any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by
-	drakx. Still
-	need finding the guilty
-
-2001/01/30  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: new draknet. unstable
-
-	* netconnect.pm: updated
-	debugged network card configuration after pixelisation.
-
-2001/01/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stdio-frontend.c, mdk-stage1/newt-frontend.c: prevent from
-	trying to set progressbar to more than 100% (rescue is more compressed
-	than drakx)
-
-	* share/rpmsrate: add ldetect to config stuff I want to have on all
-	installs (lspcidrake)
-
-2001/01/30  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm, netconnect.pm, install_interactive.pm:
-	adapt format functions given to ask_from_listf. $_ is no more set
-
-	* mouse.pm (detect): replace commands::modprobe by modules::load as it
-	should (or??)
-
-	* perl2etags: adapt to new etags (emacs 21) format
-
-	* raid.pm (make): replace commands::modprobe by modules::load as it should
-	(or??)
-
-	* perl2fcalls (@exclude_calls): add Eth as dam's use it quite a lot in his
-	regexps
-
-	* share/locales.tar.bz2: misc/LC_NUMERIC tells to use "," as number
-	separator instead of ".".
-	The sheer result is:
-	"0.6" * 10  gives 0
-	"0,6" * 10  gives 6
-	
-	So i have overwritten misc/LC_NUMERIC with
-	/usr/share/locale/en/LC_NUMERIC and
-	it works nicely now :)
-
-2001/01/29  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakboot: corrected typo
-
-2001/01/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: 
-	  - deprecate "hdreiser.img" since we have room for "reiserfs.o" in
-	"hd.img"
-	  - following deprecation of "other.img", reintegrate big modules in
-	relevant boot disks
-
-2001/01/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, share/po/et.po: updated Estonian file
-
-2001/01/29  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (getCompaqSmartArray): /proc/array/ida0 can contain
-	more than one ida/c0d0p*
-
-2001/01/28  dam's  <damien@mandrakesoft.com>
-
-	* share/help.xpm, network.pm, ChangeLog, netconnect.pm: updated
-
-2001/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
-	bug causing reiserfs partitions
-	not to be displayed/asked for formatting. The default value being used.
-
-	* any.pm (get_autologin): adapt to new format of sysconfig/desktop
-
-2001/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
-	bug causing reiserfs partitions
-	not to be displayed/asked for formatting. The default value being used.
-
-	* any.pm (get_autologin): adapt to new format of sysconfig/desktop
-
-2001/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
-	bug causing reiserfs partitions
-	not to be displayed/asked for formatting. The default value being used.
-
-	* any.pm (get_autologin): adapt to new format of sysconfig/desktop
-
-2001/01/28  siegel
-
-	* share/po/de.po: new german version
-
-2001/01/26  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: updated embedded mode
-
-	* standalone/drakboot: added embedded mode
-
-2001/01/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/include/stdio.h: adjust include files to compile
-	bzlib
-
-	* mdk-stage1/stage1.c: restore passing of pcmcia info to stage2
-
-	* mdk-stage1/bzlib/compress.c, mdk-stage1/bzlib/bzlib.c,
-	mdk-stage1/bzlib/randtable.c, mdk-stage1/bzlib/huffman.c,
-	mdk-stage1/modules.c, mdk-stage1/bzlib/crctable.c,
-	mdk-stage1/bzlib/decompress.c, mdk-stage1/bzlib/Makefile,
-	mdk-stage1/bzlib/bzlib_private.h, mdk-stage1/tools.c,
-	mdk-stage1/Makefile, mdk-stage1/bzlib/blocksort.c: 
-	  - use bzlib instead of zlib to reduce overall size
-	  - take home my own bzlib code to (1) reduce code size with good
-	compile options (2) make it compile and link against dietlibc
-
-	* mdk-stage1/mar/mar-extract-only.c, mdk-stage1/mar/mar-extract-only.h,
-	mdk-stage1/mar/mar-frontend.c, mdk-stage1/mar/mar.h,
-	mdk-stage1/mar/Makefile: mar now uses bzlib, no more zlib
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: comply to new "mar -l" format
-
-2001/01/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): prepare for advertising...
-
-	* interactive_newt.pm (ask_from_entries_refW): major rework for new
-	format, still need work
-	(ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
-	NEWT_FLAG_HIDDEN
-	(myTextbox): wrap the text if needed
-	(myTextbox): use a vertical scrollbar if needed
-
-	* Newt/Newt.xs (newtFormAddGrid): new name for
-	newtGridAddComponentsToForm, swap
-	parameters for much better understanding
-	(newtListboxGetCurrent): returns a SV (together with
-	newtListboxAddEntry)
-	(newtListboxAddEntry): data is now a SV
-
-2001/01/26  siegel
-
-	* share/po/de.po: .
-
-2001/01/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): prepare for advertising...
-
-	* interactive_newt.pm (ask_from_entries_refW): major rework for new
-	format, still need work
-	(ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
-	NEWT_FLAG_HIDDEN
-	(myTextbox): wrap the text if needed
-	(myTextbox): use a vertical scrollbar if needed
-
-	* Newt/Newt.xs (newtFormAddGrid): new name for
-	newtGridAddComponentsToForm, swap
-	parameters for much better understanding
-	(newtListboxGetCurrent): returns a SV (together with
-	newtListboxAddEntry)
-	(newtListboxAddEntry): data is now a SV
-
-2001/01/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): prepare for advertising...
-
-	* interactive_newt.pm (ask_from_entries_refW): major rework for new
-	format, still need work
-	(ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
-	NEWT_FLAG_HIDDEN
-	(myTextbox): wrap the text if needed
-	(myTextbox): use a vertical scrollbar if needed
-
-	* Newt/Newt.xs (newtFormAddGrid): new name for
-	newtGridAddComponentsToForm, swap
-	parameters for much better understanding
-	(newtListboxGetCurrent): returns a SV (together with
-	newtListboxAddEntry)
-	(newtListboxAddEntry): data is now a SV
-
-2001/01/25  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm: disable steps 'packages choice', 'configure X', and
-	'configure' 'printer'
-
-	* install_steps_interactive.pm: don't oblige user addition
-
-	* network.pm: display ethernet module
-
-	* netconnect.pm: network informations filled into
-	$prefix/var/lib/naat/configuration
-
-2001/01/25  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1-data/stage1.tar.bz2: restore symlink /sbin/sh ->
-	/usr/bin/sh for stage2
-
-	* mdk-stage1/probing.h: better tightness of probing stuff
-
-	* mdk-stage1/probing.c: better tightness of probing stuff
-	print warning message when insmod of PCI-detected device fails
-
-	* mdk-stage1/stage1.c: 
-	  - mdk-stage1: now linux-2.4 uses floppy.o to access floppy drives
-	  - remove fat/vfat modules from some boot floppies now that we don't
-	need it anymore
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: re-integrate autoprobe of
-	tulip network cards, kernel-2.4 has strange way to classify some of its
-	net modules..
-
-2001/01/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: Waw, italian translator is very fast :)
-	updated Indonesian and Italian fiels
-
-	* share/po/id.po: updated Indonesian and Italian fiels
-
-	* share/locales.tar.bz2: added iso9 locale definitions
-
-	* lang.pm: fixed LANGUAGE for mk locale
-
-2001/01/25  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (spawnShell): fix error message
-
-2001/01/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1-data/stage1.tar.bz2: 
-	  - clean up deprecated symlinks (insmod, rmmod, cardmgr)
-	  - remove unecessary device files
-
-	* mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
-	mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
-	mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
-	mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h,
-	mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h,
-	mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c,
-	mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h,
-	mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
-	mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
-	mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile,
-	mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h,
-	mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia
-
-2001/01/24  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun
-
-	* install_steps.pm (afterInstallPackages): cleanup
-
-	* interactive.pm: better documentation of ask_from_entries_refH features
-	(entry)
-
-2001/01/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1-data/stage1.tar.bz2: 
-	  - clean up deprecated symlinks (insmod, rmmod, cardmgr)
-	  - remove unecessary device files
-
-	* mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
-	mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
-	mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
-	mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h,
-	mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h,
-	mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c,
-	mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h,
-	mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
-	mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
-	mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile,
-	mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h,
-	mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia
-
-2001/01/24  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun
-
-	* install_steps.pm (afterInstallPackages): cleanup
-
-	* interactive.pm: better documentation of ask_from_entries_refH features
-	(entry)
-
-2001/01/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated Greek file
-
-2001/01/22  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm, netconnect.pm: corrected slide bar, and
-	added network conf save in /root/networking.tmp
-
-2001/01/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: add automatic support in choice of NET device, in
-	case of multiple NET devices
-	consistent dot-terminated error messages, consistent no-dot log messages
-	re-put Netmask input per default (void entry -> automatic guess)
-
-	* mdk-stage1/stage1.c, mdk-stage1/dhcp.c, mdk-stage1/modules.c: consistent
-	dot-terminated error messages, consistent no-dot log messages
-
-2001/01/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/id.po: updated Indonesian file
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/ko.po,
-	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/pl.po, netconnect.pm, share/po/no.po, share/po/fi.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated po files
-
-	* share/po/wa.po: updated po files
-	updated pot file
-
-	* install2.pm, lang.pm: fixed the places where console fonts and related
-	files are put under
-	/etc/sysconfig to the places really used by console-tools
-
-	* share/po/DrakX.pot: updated pot file
-
-	* share/po/hr.po: updated po files
-	updated Croatian file
-
-2001/01/22  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (read_rpmsrate): if $packages is undef, ignore it. That way,
-	read_rpmsrate
-	can be called standalone.
-
-	* network.pm, install_steps_interactive.pm, netconnect.pm, my_gtk.pm,
-	install_interactive.pm, install2.pm, partition_table.pm, install_any.pm,
-	any.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: $::beginner is
-	deprecated, replaced by !$::expert
-
-2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in
-	network/ftp installs
-
-2001/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (create_ctree): fix case with formatted list
-
-2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's
-
-	* mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in
-	network/ftp installs
-
-2001/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (create_ctree): fix case with formatted list
-
-2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's
-
-2001/01/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files
-
-2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/nfsmount.c: fix remaining perror's
-
-	* mdk-stage1/stage1.c: fix remaining perror's
-	  - better msg in fatal errors
-	  - do not include code to spawn a shell for releases
-
-2001/01/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files
-
-2001/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectMouse): use ask_from_treelist_
-
-	* interactive.pm (ask_from_treelist_): created, split with the separator,
-	call translate on
-	words, then re-join.
-
-2001/01/19  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixes for CD not changeable.
-
-	* install_steps_interactive.pm: fixed unselect group and inoperant
-	individual package selection.
-	removed expert mode and install class.
-
-2001/01/18  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fixed obligation of relative large install, now
-	minimum is lesser.
-
-	* install_steps_gtk.pm: make sure no ratio above 1 can occur, still need
-	to see why as it happens
-	on install-abort-choices-install or
-	install-abort-choices-fs-format(none)-choices-install
-
-	* live_install: update live install to match /tmp/image instead of
-	/tmp/rhimage.
-
-2001/01/17  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm, install_any.pm: fixes with /tmp/rhimage and
-	/tmp/image.
-
-	* pkgs.pm: update to use new header file format in hdlist (added arch) but
-	depslist has not it...
-
-	* install2.pm: fixes with /tmp/rhimage and /tmp/image
-
-2001/01/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po: updated bulgarian file
-
-2001/01/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/url.c: use strrchr instead of doing it by hand
-
-	* mdk-stage1/insmod-busybox/busybox.h,
-	mdk-stage1/insmod-busybox/utility.c, mdk-stage1/insmod-busybox/insmod.c:
-	
-	  - replace remaining perror's with log_perror's
-	  - little code cleanup
-
-	* mdk-stage1/stage1-data/stage1.tar.bz2,
-	mdk-stage1/stage1-data/stage1-with-sash.tar.bz2: add /dev/fd0
-
-	* mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/tools.c,
-	mdk-stage1/tools.h, mdk-stage1/disk.c, mdk-stage1/modules.c: 
-	  - add load of third party modules in Expert mode (PS rulz)
-
-2001/01/12  siegel
-
-	* share/po/de.po: updates
-
-2001/01/12  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fixed addUser for invocation of
-	any::ask_users.
-	fixed bad invocation of installation of X server.
-
-2001/01/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/cdrom.c: add more memory carefulness with CDROM install
-	  - add wait_message for initializing of CDROM's (it can be long when
-	it's SCSI)
-	  - print CDROM drive names (model) in dialogs
-
-	* mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/disk.c: 
-	  - fix behaviour with bad ISO images (DISK installs)
-	  - better dialogs for DISK installs
-
-2001/01/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: make lang list in format for tree-selector
-
-2001/01/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/disk.c: fix failing umount for DISK installs in some failing
-	loopback situations
-	act nicely when no partitions are found on some disk
-
-	* mdk-stage1/modules.h: polish generic blank.img situation (no modules
-	and/or modules.dep available)
-
-	* mdk-stage1/lomount.c: fix failing umount for DISK installs in some
-	failing loopback situations
-	better log messages
-	continue anyway when insmod'ing of modules fail (for blank.img)
-
-	* mdk-stage1/probing.c: close some fd's
-
-	* mdk-stage1/stage1.c, mdk-stage1/modules.c: polish generic blank.img
-	situation (no modules and/or modules.dep available)
-	continue anyway when insmod'ing of modules fail (for blank.img)
-
-2001/01/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile, mdk-stage1/disk.c: 
-	  - add DISK install from ISO image file
-	  - add FTP
-	  - add HTTP
-	  - use single place for mountpoints and static directories
-
-	* mdk-stage1/hack, mdk-stage1/lomount.c, mdk-stage1/lomount.h: 
-	  - add DISK install from ISO image file
-
-	* mdk-stage1/stage1.c, mdk-stage1/config-stage1.h, mdk-stage1/stage1.h,
-	mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c,
-	mdk-stage1/tools.h, mdk-stage1/newt-frontend.c, mdk-stage1/network.c: 
-	  - add FTP
-	  - add HTTP
-	  - use single place for mountpoints and static directories
-
-	* mdk-stage1/insmod-busybox/Config.h: tweak config
-
-2001/01/11  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/adduserdrake: adduserdrake may handles autologin
-
-	* install_steps.pm (addUser): set autologin
-
-	* install2.pm (addUser): moved setAuthentication to install_steps::addUser
-
-	* install_steps_interactive.pm (addUser): fix
-
-2001/01/11  dam's  <damien@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm, ChangeLog,
-	netconnect.pm: updated
-
-2001/01/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: remove nasty messages when
-	mar or marfiles not available to perform consistency check
-
-2001/01/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (configureX): call directly $o->pkg_install, no need to
-	add 'XFree86-' at the beginning
-	(addUser): use any::write_passwd_user
-	(setRootPassword): use any::write_passwd_user
-	(configureX): fix bad $install given to Xconfigurator::main
-
-	* any.pm (write_passwd_user): add or update an entry in /etc/passwd
-	(ask_users): created, interactively ask users to add (used in
-	adduserdrake and install)
-	(allocUsers, addUsers): changed the prototype
-	(setupBootloader): grep out fat partitions for the "Boot device"
-	propositions (people are too stupid)
-
-	* my_gtk.pm (main): third argument is a function to call before leaving in
-	case of
-	"cancel" clicked.
-
-	* interactive_gtk.pm (create_ctree): fix default value selecting failing
-	(in case of "format")
-	(ask_from_entries_refW): apply "format" on label when icon is missing
-	for iconlist
-	(ask_from_entries_refW): handle "canceled" callback. Permits to overrule
-	the cancel.
-
-	* install_any.pm (g_auto_install): deep copy of $o->{users} because we're
-	modifying it
-
-	* install_steps_interactive.pm (addUser): use any::ask_users
-
-	* standalone/adduserdrake: use any::ask_users
-
-	* Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
-	install2::main)
-
-	* install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
-	here
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
-	callback defaults
-	to "sub { 0 }"
-
-2001/01/11  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when
-	icon is missing for iconlist
-	(ask_from_entries_refW): handle "canceled" callback. Permits to overrule
-	the cancel.
-
-	* install_steps.pm (configureX): call directly $o->pkg_install, no need to
-	add 'XFree86-' at
-	the beginning
-	(addUser): use any::write_passwd_user
-	(setRootPassword): use any::write_passwd_user
-	(configureX): fix bad $install given to Xconfigurator::main
-
-	* any.pm (write_passwd_user): add or update an entry in /etc/passwd
-	(ask_users): created, interactively ask users to add (used in
-	adduserdrake
-	and install)
-	(allocUsers, addUsers): changed the prototype
-	(setupBootloader): grep out fat partitions for the "Boot device"
-	propositions (people are too stupid)
-
-	* my_gtk.pm (main): third argument is a function to call before leaving in
-	case of
-	"cancel" clicked.
-
-	* install_any.pm (g_auto_install): deep copy of $o->{users} because we're
-	modifying it
-
-	* install_steps_interactive.pm (addUser): use any::ask_users
-
-	* standalone/adduserdrake: use any::ask_users
-
-	* Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
-	install2::main)
-
-	* install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
-	here
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
-	callback defaults
-	to "sub { 0 }"
-
-2001/01/11  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (autologin): moved to package any
-
-	* interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when
-	icon is missing for iconlist
-	(ask_from_entries_refW): handle "canceled" callback. Permits to overrule
-	the cancel.
-
-	* install_steps.pm (configureX): call directly $o->pkg_install, no need to
-	add 'XFree86-' at
-	the beginning
-	(addUser): use any::write_passwd_user
-	(setRootPassword): use any::write_passwd_user
-	(configureX): fix bad $install given to Xconfigurator::main
-
-	* any.pm (write_passwd_user): add or update an entry in /etc/passwd
-	(ask_users): created, interactively ask users to add (used in
-	adduserdrake
-	and install)
-	(allocUsers, addUsers): changed the prototype
-	(setupBootloader): grep out fat partitions for the "Boot device"
-	propositions (people are too stupid)
-
-	* my_gtk.pm (main): third argument is a function to call before leaving in
-	case of
-	"cancel" clicked.
-
-	* install_any.pm (g_auto_install): deep copy of $o->{users} because we're
-	modifying it
-
-	* Makefile.config (STANDALONEPMS): remove netdrake (which is deprecated)
-
-	* install_steps_interactive.pm (addUser): use any::ask_users
-
-	* standalone/adduserdrake: use any::ask_users
-
-	* Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
-	install2::main)
-
-	* install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
-	here
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
-	callback defaults
-	to "sub { 0 }"
-
-2001/01/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/dietfeatures.h: tweak dietlibc config to get minimal
-	size
-
-	* mdk-stage1/dietlibc/lib/vsscanf.c, mdk-stage1/dietlibc/lib/ttyname.c:
-	remove warnings from compile
-
-2001/01/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed'
-	callback on clist/list/ctree
-
-	* install_steps.pm (addUser): use any::pack_passwd
-	(setRootPassword): use any::unpack_passwd and any::pack_passwd
-
-	* Xconfigurator.pm (cardConfiguration): adapt for $install which is
-	generic
-	(autologin): use $install which is now generic
-
-	* install_steps_interactive.pm (selectLanguage): many_languages choice
-	moved there as advanced
-
-	* my_gtk.pm (create_packtable): yet another try to have something nice :)
-	!! uses Gtk::Table::attach_raw which is available in
-	perl-GTK-0.7004-6mdk !!
-	(create_box_with_title): with the size given to set_usize for the scroll
-	containing the text widget in case of long text. and don't let the
-	scroll
-	grow.
-	(gtktext_insert): remove adding an ending "\n" (no more needed?)
-
-	* any.pm (setAutologin): cleanup
-	(pack_passwd, unpack_passwd): created
-
-2001/01/10  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm: corrected last message . firewall
-
-2001/01/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: fix modules.pm for modules to be skept in stage1 (ppa, imm,
-	parport*, plip)
-
-2001/01/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed'
-	callback on clist/list/ctree
-
-	* install_steps.pm (addUser): use any::pack_passwd
-	(setRootPassword): use any::unpack_passwd and any::pack_passwd
-
-	* my_gtk.pm (create_packtable): yet another try to have something nice :)
-	!! uses Gtk::Table::attach_raw which is available in
-	perl-GTK-0.7004-6mdk !!
-	(create_box_with_title): with the size given to set_usize for the scroll
-	containing the text widget in case of long text. and don't let the
-	scroll
-	grow.
-	(gtktext_insert): remove adding an ending "\n" (no more needed?)
-
-	* any.pm (setAutologin): cleanup
-	(pack_passwd, unpack_passwd): created
-
-	* Xconfigurator.pm (cardConfiguration): adapt for $install which is
-	generic
-	(autologin): use $install which is now generic
-
-	* install_steps_interactive.pm (selectLanguage): many_languages choice
-	moved there as advanced
-
-	* standalone/printerdrake, standalone/keyboarddrake, standalone/draknet2,
-	standalone/livedrake, standalone/drakboot, standalone/draksec,
-	standalone/netdrake, standalone/mousedrake, standalone/drakgw,
-	standalone/drakxservices, standalone.pm, standalone/draknet,
-	standalone/XFdrake, standalone/diskdrake, standalone/adduserdrake,
-	standalone/drakxconf: use standalone and standalone::pkgs_install
-
-2001/01/09  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (drakx_version): nicer (4gc)
-
-	* install2.pm (main): log::l the drakx_version
-
-	* my_gtk.pm (create_packtable): no_expand option added
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): field
-	"disabled" added,
-	"advanced_messages" added
-
-	* lang.pm (langs): created (transform the $o->{langs} hash ref in a list)
-	(pack_langs): use lang::langs
-
-	* install_steps.pm (selectLanguage): $o->{langs} is now a ref so
-	initialize as such
-
-	* Makefile (get_needed_files): generate /usr/share/VERSION which contains
-	the version
-	of ChangeLog (which is updated at each upload)
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): handle "check
-	for bad blocks" as advanced
-	(setRootPassword): remove choosing non-md5 or non-shadow passwords.
-
-	* install_any.pm (setPackages): use lang::langs instead of using
-	$o->{langs} as a array ref (it is not so anymore)
-	(spawnShell): print the drakx_version
-
-2001/01/08  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm: fixes
-	(ask_from_treelistf, ask_from_treelist): now use ask_from_entries_refH
-	(ask_from_entries_refH_powered): remove "1;" (was there for debugging)
-
-	* interactive_gtk.pm: fixes
-	(ask_from_treelistW): removed
-	(create_ctree): created, used for ``type => treelist'' entries
-
-	* my_gtk.pm: fixes
-
-	* ChangeLog: New snapshot uploaded
-
-2001/01/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sr.po, share/po/sp.po, share/po/no.po, share/po/cs.po: updated
-	Czech, Norwegian and Serbian files
-
-2001/01/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: update code for new ask_from_entries_refH
-	which doesn't handle optional ok/cancel names in arg 1.
-	must be handled via ask_from_entries_refH_powered
-	(selectLanguage, selectKeyboard): use ask_from_entries_refH instead of
-	ask_from_listf_, it enables the use of advanced
-
-	* any.pm, printerdrake.pm: update code for new ask_from_entries_refH which
-	doesn't handle optional ok/cancel names in arg 1.
-	must be handled via ask_from_entries_refH_powered
-
-	* interactive.pm: update code for new ask_from_entries_refH which doesn't
-	handle optional ok/cancel names in arg 1.
-	must be handled via ask_from_entries_refH_powered
-	(ask_from_listf_no_check): replaces ask_from_list_no_check
-	(ask_from_entries_refH_powered): sorts the list if needed or wanted
-
-	* partition_table_raw.pm (test_for_bad_drives): created
-	- ugly stuff needed mainly for Western Digital IDE drives
-	- try writing what we've just read, yells if it fails
-	- testing on last sector of head #0 (unused in 99% cases)
-
-	* ftp.pm (getFile): make it work (it used to dead-loop when getFile'ing an
-	non-existent
-	file, stressing the ftp server :-/ )
-	for the moment, just release cdrom.img, hd.img and hdreiser.img
-	others should should come...
-
-	* install_steps.pm: for the moment, just release cdrom.img, hd.img and
-	hdreiser.img
-	others should should come...
-
-	* interactive_gtk.pm (ask_from_listW): removed
-	(create_list): calls "format" on list elems before prompting them
-	(create_clist): created
-	(ask_from_entries_refW): calls create_clist in case of list with no help
-
-	* install_steps_gtk.pm (installPackages): autoflush stdout before beeping
-	(installPackages): don't take into account the time when prompting the
-	user
-
-	* common.pm (may_apply): added
-
-	* install_any.pm (getHds): test_for_bad_drives called on hard drives
-	(getHds): ensure $o->{hds} is not set until the hard drives are checked
-
-2001/01/06  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm (setup): don't xmodmap if DISPLAY is unset
-
-	* ChangeLog: New snapshot uploaded
-	New snapshot uploaded
-
-2001/01/06  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm (setup): don't xmodmap if DISPLAY is unset
-
-	* ChangeLog: New snapshot uploaded
-
-2001/01/06  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm (setup): don't xmodmap if DISPLAY is unset
-
-	* standalone/rpmdrake: deprecated (and has been for a long time now)
-
-	* network.pm, install_steps_interactive.pm, netconnect.pm,
-	install_interactive.pm, standalone/adduserdrake, any.pm,
-	Makefile.config, printerdrake.pm, Xconfigurator.pm, diskdrake.pm:
-	ask_from_entries_refH parameter format has changed so change all
-	accesses to it.
-
-2001/01/05  François Pons  <fpons@mandrakesoft.com>
-
-	* lang.pm, keyboard.pm: forget _exit in child process after a fork of
-	DrakX
-	removed need of packdrake binary
-
-	* Xconfigurator.pm: use of SHARE_PATH for MonitorsDB, Cards+, CardsNames
-
-	* live_install2: cleanup to keep libperl.so but the right one
-
-	* live_install: no more copy of files on live system, now use environment
-	variable by DrakX cleanup
-
-	* perl2fcalls: added packdrake call (via new but incomplete) and package
-
-	* install_any.pm, commands.pm, pkgs.pm: removed need of packdrake binary
-
-	* netconnect.pm: fixed syntax error
-
-	* modules.pm: eval insmoding ide-cd (just in case)
-	removed need of packdrake binary
-
-2001/01/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po, share/po/ca.po, share/po/az.po: updated Azeri, Catalan
-	and Japanese files
-
-2001/01/05  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm: help cperl-mode
-
-	* interactive_gtk.pm, network.pm, install_steps_interactive.pm, my_gtk.pm,
-	interactive.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: move to
-	new ask_from's:
-	- ask_from_entries_ref is deprecated, use ask_from_entries_refH
-	- ask_from_list now calls ask_from_entries_refH_powered
-	still not done:
-	- ask_from_treelist should use ask_from_entries_refH_powered,
-	and lists with no help should use CList (List is bad)
-	- keyboard and mouse binding is still rough
-	- enhance the look
-
-	* keyboard.pm: add the percentage of each keyboard types (as a comment for
-	now)
-
-2001/01/04  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: cleaned... everything should be buggy.
-
-2001/01/04  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed some old $p->{file} by new $p->[$FILE]
-	code cleanup and fixes for lilo not upgrade
-
-2001/01/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* install_any.pm: fixed the functions doing the lists of languages
-
-	* lang.pm: fixed the functions doing the lists of languages
-	The list of languages now has complete locale names insted of just
-	language
-	code (that is needed to differentiate zh_CN and zh_TW among others)
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated Brazilian file
-
-	* share/po/eu.po: updated Basque file
-	updated Brazilian file
-
-2001/01/04  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: some pixelization using the new if_
-
-	* install_steps_interactive.pm (setRootPassword): fix pixelization
-	keep $o->{langs} unpacked to simplify things
-	if_ pixelization
-
-	* common.pm (%EXPORT_TAGS): add if_ in "common" exported tags
-	(if_): created. Use it to replace things like
-	($::expert ? $val : ()) by if_($::expert, $val)
-
-	* keyboard.pm: nl keyboard is not used, so defaults to us_intl
-
-	* lang.pm, install_steps.pm, pkgs.pm, install_any.pm: keep $o->{langs}
-	unpacked to simplify things
-
-	* netconnect.pm: quite a few clean-up (and buggying)
-
-2001/01/03  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm: admin user removed before beeing added
-
-	* netconnect.pm: corrected typo
-	LAN is configured with default value if firewall
-
-2001/01/03  François Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm: fixed invocation of change_type by clicking on legend
-	unless expert
-
-	* install2.pm: fixed usage with testing
-
-	* install_steps.pm: fixed some other services to start in case something
-	gets wrong,
-	this fixes some deadlock on upgrade from 7.0.
-	fixed usage with testing
-
-	* partition_table.pm: fixed overlapping partitions between one extended
-	and one regular primary.
-	should be accepted (log printed instead of error) as diskdrake allow
-	their
-	creation in expert.
-
-2001/01/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: add checks of dependencies on marfiles
-	fix a couple of broken dependencies in modules.pm
-
-2001/01/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, share/locales.tar.bz2: locales in glibc 2.2 format
-
-2001/01/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): move the setting of PATH and spawnShell *after*
-	setting $prefix
-
-2000/12/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/rpmsrate: added a few locales dependences
-
-2000/12/29  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (addUser): typo fix
-
-	* ChangeLog: New snapshot uploaded
-
-	* ftp.pm (getFile): recall getFile after rewindGetFile
-
-2000/12/29  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (addUser): typo fix
-
-	* ftp.pm (getFile): recall getFile after rewindGetFile
-
-2000/12/28  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: now /usr/lib/X11 is a relative symlink to please mirrors and
-	jako
-
-2000/12/26  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* keyboard.pm: Add the very ghost option REMOVE_MOD_META_L.
-
-2000/12/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated Lithuanian file
-
-2000/12/22  dam's  <damien@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm: corrected admin user
-	setting for firewall install.
-
-2000/12/22  François Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm: fixed load_multi on live.
-	added back all removed module with the new great mdk-stage1 of gégé.
-
-2000/12/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: make them work with kernel-2.4 by disabling non existent
-	modules
-
-2000/12/22  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm, install2.pm: commit symlink /tmp/image /tmp/rhimage
-
-2000/12/21  Pixel  <pixel@mandrakesoft.com>
-
-	* ChangeLog: New snapshot uploaded
-
-2000/12/21  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm: firewall : automatic class set when firewall (beginner=0)
-
-	* install_steps_interactive.pm: if firewall, admin password obliged
-
-	* install_steps.pm: added setAdminpassword (a little bit redundant, sorry)
-
-	* any.pm: corrected module stuff.. Thanx to pixel
-
-2000/12/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (selectMouse): unsure the device exists
-
-	* unused/christmas-karaoke.patch: handle isa cards
-
-2000/12/19  Pixel  <pixel@mandrakesoft.com>
-
-	* ChangeLog: New snapshot uploaded
-	New snapshot uploaded
-
-2000/12/19  dam's  <damien@mandrakesoft.com>
-
-	* standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm,
-	standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm,
-	standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm,
-	standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm,
-	standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm,
-	standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm,
-	standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm,
-	standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm,
-	standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm,
-	standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm,
-	standalone/pixmaps/draknet3.xpm: added control-center.
-
-2000/12/19  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: when loading /snd-card-/ module, load snd-pcm-oss
-
-	* unused/christmas-karaoke.patch: Happy Christmas :)
-
-	* install_any.pm: spawnShell: set DISPLAY, just in case :)
-
-	* install2.pm: set PATH before doing spawnShell
-
-	* Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc)
-
-	* ChangeLog: New snapshot uploaded
-
-2000/12/18  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: added embedded support for control-center
-	corrected embedded support.
-	new control center and related
-
-	* netconnect.pm: corrected typo
-	corrected typo
-
-	* standalone/drakxservices, standalone/control-center, ChangeLog,
-	standalone/XFdrake, standalone/draknet2, standalone/adduserdrake,
-	standalone/drakboot: new control center and related
-
-	* install_gtk.pm: added firewall support
-
-	* install2.pm: included firewall handling
-	changed firewall comportement
-
-	* install_steps_interactive.pm: changed firewall comportement
-
-	* modules.pm: corrected bad mergeinconf
-
-2000/12/18  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more
-	cfI/xfI
-	remove isdndb.net
-
-2000/12/19  dam's  <damien@mandrakesoft.com>
-
-	* standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm,
-	standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm,
-	standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm,
-	standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm,
-	standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm,
-	standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm,
-	standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm,
-	standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm,
-	standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm,
-	standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm,
-	standalone/pixmaps/draknet3.xpm: added control-center.
-
-2000/12/19  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: when loading /snd-card-/ module, load snd-pcm-oss
-
-	* unused/christmas-karaoke.patch: Happy Christmas :)
-
-	* install_any.pm: spawnShell: set DISPLAY, just in case :)
-
-	* install2.pm: set PATH before doing spawnShell
-
-	* Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc)
-
-2000/12/18  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: added embedded support for control-center
-	corrected embedded support.
-	new control center and related
-
-	* netconnect.pm: corrected typo
-	corrected typo
-
-	* standalone/drakxservices, standalone/control-center, ChangeLog,
-	standalone/XFdrake, standalone/draknet2, standalone/adduserdrake,
-	standalone/drakboot: new control center and related
-
-	* install_gtk.pm: added firewall support
-
-	* install2.pm: included firewall handling
-	changed firewall comportement
-
-	* install_steps_interactive.pm: changed firewall comportement
-
-	* modules.pm: corrected bad mergeinconf
-
-2000/12/18  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more
-	cfI/xfI
-	remove isdndb.net
-
-2000/12/16  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/mousedrake, standalone/drakgw: use ldetect-lst
-
-	* Makefile.drakxtools: fix daminetsex
-	use ldetect-lst
-	pci_probing now done by libldetect
-	config files moved in package ldetect-lst
-
-	* share/list: use ldetect-lst
-	pci_probing now done by libldetect
-	config files moved in package ldetect-lst
-
-	* any.pm: fix daminetsex
-
-	* modules.pm, live_install, install2.pm, standalone/lspcidrake, pkgs.pm,
-	mouse.pm: use ldetect-lst for usb => now auto detects mice types :)
-
-	* c/stuff.xs.pm, detect_devices.pm: use ldetect-lst for usb => now auto
-	detects mice types :)
-	use ldetect-lst
-	pci_probing now done by libldetect
-	config files moved in package ldetect-lst
-
-	* Makefile.config: fix daminetsex
-	use ldetect-lst
-
-	* Makefile: use ldetect-lst for usb => now auto detects mice types :)
-	use ldetect-lst
-
-	* netconnect.pm, share/CardsNames, c/Makefile.PL, Xconfigurator_new.pm,
-	Xconfigurator.pm, share/Cards+, share/MonitorsDB, share/isdndb.net,
-	share/Cards2CardsNames: pci_probing now done by libldetect
-	config files moved in package ldetect-lst
-
-2000/12/15  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: Cards+ and CardsNames are moved to ldetect-lst
-
-	* install_steps.pm: clean all unneeded stuff
-
-2000/12/14  dam's  <damien@mandrakesoft.com>
-
-	* any_new.pm, netconnect_new.pm: preparing for big jump.
-
-	* netconnect.pm: Big jump. The *_new.pm are replaced by *.pm
-	Everything should work, but you better test :)
-
-	* standalone/control-center: big improvement and cosmetic changes
-	a lot of improvement. Is able to launch multiples soft passing in
-	arguments.
-	new file. Its location should change soon.
-
-	* any.pm: Big jump. The *_new.pm are replaced by *.pm
-	Everything should work, but you better test :)
-	corrected typo.
-
-2000/12/14  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssList: obsoleted by rpmsrate
-
-	* share/rpmsrate: obsoletes compssList
-
-	* share/compssUsers, install_steps.pm, install_steps_interactive.pm,
-	Makefile, install_steps_gtk.pm, install2.pm, pkgs.pm, install_any.pm:
-	move from compssList to rpmsrate
-
-	* Newt/Newt.xs: cleanup (use of alloca to pass parameters)
-
-2000/12/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: updated Italian file
-
-2000/12/12  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: typo + if firewall, don't display 'disable network'
-
-	* standalone/draknet2: new version... still working on it
-
-	* ChangeLog: commit
-
-	* share/themes-mdk-Firewall.rc: added firewall theme
-
-	* modules.pm: my fault, corrected renaud's patch incorporation
-
-	* share/logo-mandrake-Firewall.xpm: new logo
-
-2000/12/12  François Pons  <fpons@mandrakesoft.com>
-
-	* share/list: added packdrake.pm as packdrake has been splited.
-
-	* pkgs.pm: fixed versionCompare to always return number. added checking of
-	version to
-	select obsoletes on upgrade.
-
-2000/12/11  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: Radeon uses 3D now.
-
-	* lang.pm: fixed write_langs for upgrade.
-	i18n sucking fixes.
-
-	* Xconfigurator.pm: Radeon uses 3D hw accel theoritically now.
-
-2000/12/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: Added configuration of Vietnamese input server
-
-2000/12/09  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/adduserdrake: remove debugging code
-
-	* install2.pm (selectInstallClass): give $clicked to selectInstallClass
-
-	* interactive_newt.pm (ask_from_entries_refW): reset all hidden entries to
-	null in case of error
-	on hidden entry cuz newt doesn't display null entries, disturbing
-
-	* install_steps_interactive.pm (formatMountPartitions): the format
-	partition dialog created at first use,
-	so that it doesn't appear if no partitions are formatted.
-	(selectInstallClass): ensure expert choice is kept if it was prechosen
-	(selectInstallClass): if expert pre-chosen, ensure expert is kept
-
-	* interactive_gtk.pm, install_steps.pm: small renicing
-
-2000/12/08  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed bug in list of packages provided by another one.
-
-2000/12/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po, share/po/no.po, share/po/DrakX.pot, share/po/es.po,
-	share/po/fr.po, share/po/wa.po, share/po/da.po, share/po/de.po,
-	share/po/az.po, share/po/tr.po: updated Brazilian file
-
-2000/12/08  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): warn if VERSION file doesn't exist
-	(formatPartitions): call rotate_logs after mounting the partitions
-
-	* mouse.pm (write_conf): fix to make make test_pms happy
-
-	* install_steps.pm (exitInstall): save the report.bug in /root/report.bug
-
-	* any.pm (rotate_logs): created, rotates ddebug.log and install.log in
-	/root
-
-	* ftp.pm (new): retry in case of ftp connection/login
-
-	* commands.pm: report_bug: created, returns a string
-
-2000/12/07  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected ADSL connection choice.
-	corrected typo
-
-2000/12/06  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm: erare humanum es
-	firewall begins to infect the install :).
-	new meta_class.
-
-	* share/logo-mandrake-Firewall.xpm: aded logo for firewall
-
-	* install_gtk.pm: corrected errors
-	left pixmap centered if firewall
-	improved the firewall theme.
-	errare humanum es
-	firewall infects the install.
-	The logo is changed if firewall.
-
-2000/12/06  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/keyboarddrake: add possibility to use keyboarddrake
-	non-interactive (aka give the keyboard as
-	first parameter)
-
-	* lang.pm, install_steps.pm, install_steps_interactive.pm, install2.pm,
-	install_any.pm: adapt to the fact that RPM_INSTALL_LANG is obsoloted.
-	Now rpm uses %_install_langs in /etc/rpm/macros
-
-2000/12/05  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: final fixes to versionCompare to make sure no deadlock can
-	occurs.
-
-	* Xconfigurator.pm: restored Matrox G200/G400 hw 3d accel configuration.
-
-2000/12/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po, share/po/pl.po, share/po/da.po, share/po/fi.po,
-	share/po/es.po: updated several pofiles
-
-2000/12/04  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: use isCdNotEjectable.
-
-	* common.pm: added function isCdNotEjectable.
-
-	* share/Cards+: SiS620 card are said to be unsupported by XF4.
-
-	* pkgs.pm: load only one hdlist in memory if CD is not ejectable (low
-	memory).
-	fixed compareVersion for deadlock. removed silly CODE print on deporder
-	problems.
-
-	* Xconfigurator.pm: add Options sw_cursor for SiS 6326 in XF3 mode.
-
-2000/12/03  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: incorporated cmodifications in the firewall branch
-
-	* netconnect.pm: netconnect_new > netconnect.pm
-
-	* netconnect_consts.pm: incorporated in the firewall branch.
-
-	* standalone/draknet2: incoporated in the firewall branch
-
-	* any_new.pm: any_new > any, so we remove it now.
-
-	* netconnect_new.pm: netconnect_new > netconnect, so we remove it now.
-	incorporated in the firewall branch
-
-	* modules.pm: incorporated modifications to the firewall branch. Hope they
-	won't break anything...
-
-2000/12/02  dam's  <damien@mandrakesoft.com>
-
-	* share/po/az.po: correction in firewall incorporated
-
-	* ChangeLog: first attempt ro build the firewall install
-
-	* standalone/mousedrake: incorporated in the firewall branch
-
-	* share/po/ru.po, share/po/no.po, share/po/sk.po: correction incorporated
-	in the firewall branch
-
-2000/11/28  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: included reno's patches. Now should work without kudzu.
-	branch to build the firewall install.
-
-	* standalone/pixmaps/port.xpm, standalone/pixmaps/.xvpics/px4.xpm,
-	standalone/pixmaps/ethernet.xpm, standalone/pixmaps/.xvpics/px1.xpm,
-	standalone/pixmaps/px2.xpm, standalone/pixmaps/unknown.xpm,
-	standalone/pixmaps/.xvpics/px3.xpm, standalone/pixmaps/px4.xpm,
-	standalone/pixmaps/px1.xpm, standalone/pixmaps/.xvpics/px2.xpm,
-	standalone/pixmaps/px3.xpm, standalone/pixmaps/modem.xpm,
-	standalone/pixmaps/isdn.xpm: Initial revision
-	branch to build the firewall install.
-
-	* partition_table_dos.pm, share/po/bg.po, share/po/sr.po,
-	share/template.in/cdrom.kdelnk.in,
-	share/template.in/cdrom.fsdev.kdelnk.in, share/po/hr.po, c/silo.c,
-	Makefile, share/consolefonts/lat0-sun16,
-	share/themes/DarkMarble-check_off.png,
-	share/themes/marble3d-button_def.png, share/locales.tar.bz2.sparc,
-	do_resize_fat, share/po/wa.po, share/po/is.po,
-	share/themes/DarkMarble-button3_out_prelight.png, resize_fat/main.pm,
-	class_discard.pm, .cvsignore, share/step-orange.xpm, share/reload.xpm,
-	install_interactive.pm, c/README, Xconfig.pm, share/themes.rc,
-	share/themes/marble3d-bg1.png, perl2fcalls, share/themes-blackwhite.rc,
-	share/themes-blueHeart.rc, pkgs.pm, keyboard.pm,
-	share/rpm-installed.xpm, share/po/gl.po, share/po/lv.po,
-	standalone/icons/ftout.xpm, Makefile.drakxtools, http.pm,
-	share/step-green-click.xpm, partition_table_sun.pm,
-	share/themes/focus.png, share/keymaps_generate, lang.pm, verify_c,
-	share/po/.cvsignore, share/ftin.xpm, standalone/draksec,
-	resize_fat/info_sector.pm, share/compssUsers, share/step-orange-on.xpm,
-	Makefile.config, share/list.sparc, share/po/hu.po, run_program.pm,
-	share/themes/marble3d-button4.png, share/rpm-unselected.xpm,
-	share/list.i386, netconnect.pm, share/themes/DarkMarble-button3_out.png,
-	c/md5_crypt.c, share/themes/mdk-toggle_on.png, partition_table.pm,
-	standalone/livedrake, share/diskdrake.rc,
-	share/themes/DarkMarble-check_on.png, standalone/draknet,
-	share/po/br.po, Newt/typemap, share/themes/blueHeart-button2.png,
-	share/po/ro.po, share/list, share/po/cs.po, share/po/be.po,
-	share/po/sp.po, share/step-orange-click.xpm, modparm.pm,
-	share/step-green.xpm, share/rpm-base.xpm,
-	share/themes/marble3d-check1.png, crypto.pm, share/po/eu.po,
-	share/themes/marble3d-button1.png, c/stuff.pm, install_steps.pm,
-	share/Cards2CardsNames, Newt/Makefile.PL,
-	share/themes/mdk-Desktop-bg.png, netconnect_consts.pm, share/po/id.po,
-	share/themes/mdk-check_on.png, share/po/fi.po, share/po/sk.po,
-	standalone/icons/findf.xpm, share/po/lt.po,
-	share/themes/mdk-check_off.png, fs.pm, c/.cvsignore,
-	share/themes/mdk-toggle_off.png, share/po/ca.po, timezone.pm,
-	detect_devices.pm, share/consolefonts/ruscii_8x16, diskdrake.pm,
-	standalone/icons/reload.xpm, share/rpm-selected.xpm, resize_fat/io.pm,
-	Newt/Newt.xs, Newt/.cvsignore, install2, share/po/pt_BR.po,
-	share/themes-marble3d.rc, resize_fat/fat.pm, sbus_probing/main.pm,
-	share/template.in/floppy.fsdev.kdelnk.in, printer.pm, share/po/it.po,
-	resize_fat/.cvsignore, install_steps_interactive.pm,
-	share/themes/mdk-button4.png, live_install, standalone/draknet2,
-	any_new.pm, share/list.alpha, share/rpm-semiselected.xpm, c.pm,
-	share/logo-mandrake-Desktop.xpm, printerdrake.pm, network.pm,
-	share/step-red-on.xpm, share/themes-mdk.rc, share/po/validate.pl,
-	swap.pm, share/themes/blueHeart-button4.png, standalone/keyboarddrake,
-	g_auto_install, share/po/es.po, standalone/lspcidrake, share/po/de.po,
-	partition_table_mac.pm, standalone/mousedrake, devices.pm,
-	share/po/ru.po, resize_fat/c_rewritten.xs, share/po/cy.po,
-	share/themes/mdk-button1.png, netconnect_new.pm, install_any.pm,
-	share/po/nl.po, share/aliases, share/keyboards.tar.bz2, share/po/sv.po,
-	Newt/Av_CharPtrPtr.c, c/stuff.xs.pm, share/themes-DarkMarble.rc,
-	share/step-red.xpm, Newt/Av_CharPtrPtr.h, c/smp.c,
-	share/po/zh_CN.GB2312.po, commands.pm, standalone/icons/find.xpm,
-	perl2etags, share/po/Changelog, standalone/drakboot,
-	resize_fat/dir_entry.pm, share/fonts.tar.bz2, share/install.rc,
-	share/themes/blueHeart-button1.png, share/Cards+, share/po/uk.po,
-	share/MonitorsDB, share/template.in/Dos_.kdelnk.in,
-	standalone/printerdrake, services.pm, share/kmap2bkmap,
-	share/themes/blueHeart-button_def.png, share/po/az.po, share/po/tr.po,
-	common.pm, getpkgs_deps, standalone/drakxconf, share/ftout.xpm,
-	install_gtk.pm, Xconfigurator_consts.pm, share/consolefonts/lat2-sun16,
-	share/po/no.po, resize_fat/boot_sector.pm, share/CardsNames,
-	c/Makefile.PL, share/themes-mdk-Desktop.rc,
-	share/themes/blueHeart-brown_bg1.png, share/logo-mandrake.xpm,
-	share/consolefonts/Cyr_a8x16, standalone/netdrake, standalone/drakgw,
-	share/po/sl.po, standalone/rpmdrake, share/makedev.sh,
-	share/themes/DarkMarble-button3_in_prelight.png, share/themes-blue.rc,
-	install_steps_newt.pm, resize_fat/Makefile.PL, partition_table_empty.pm,
-	my_gtk.pm, share/po/i18n_compssUsers, install2.pm, share/compssList,
-	share/po/fr.po, share/themes/DarkMarble-button3_in.png,
-	standalone/icons/ftin.xpm, share/modparm.lst, raid.pm,
-	standalone/diskdrake, share/po/ko.po,
-	share/template.in/zip.fsdev.kdelnk.in, share/compssUsers.desktop,
-	share/po/ja.po, any.pm, share/isdndb.net,
-	share/template.in/floppy.kdelnk.in, share/step-green-on.xpm,
-	share/step-red-click.xpm, share/po/Makefile, help.pm,
-	share/po/zh_TW.Big5.po, c/sbus.c, genmodparm, share/po/pl.po,
-	share/themes-savane.rc, install_steps_stdio.pm, share/po/th.po,
-	loopback.pm, resize_fat/any.pm, share/po/el.po, install_steps_gtk.pm,
-	Newt/Newt.pm, Xconfigurator.pm, interactive_gtk.pm,
-	standalone/drakxservices, resize_fat/Makefile, fsedit.pm,
-	interactive_stdio.pm, live_install2, resize_fat/directory.pm,
-	share/po/pt.po, install_steps_auto_install.pm, share/po/DrakX.pot,
-	share/themes/mdk-bg.png, share/list.ppc, share/po/ga.po, share/po/et.po,
-	share/keymaps.tar.bz2, partition_table_bsd.pm, c/md5.c, share/help.xpm,
-	share/themes/marble3d-check2.png, ftp.pm, c/md5.h,
-	standalone/adduserdrake, share/themes/marble3d-button2.png,
-	partition_table_raw.pm, share/template.in/zip.kdelnk.in,
-	share/locales.tar.bz2, standalone/icons/fileopen.xpm,
-	share/template.in/kppprc.in, ChangeLog, resize_fat/README, mouse.pm,
-	commands, standalone/XFdrake, share/gconv.tar.bz2, share/po/eo.po,
-	interactive.pm, log.pm, share/themes/DarkMarble-gloom2.png,
-	interactive_newt.pm, share/po/da.po, resize_fat/c_rewritten.pm,
-	bootloader.pm, share/po/af.po: branch to build the firewall install.
-
-2000/11/28  François Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: change upgrade section for keyboard.
-
-	* install_steps_gtk.pm: extended chooseSizeToInstall.
-
-	* install_steps.pm: updated comment.
-
-	* pkgs.pm: fixed misuse of map with values returing list which are indexed
-	afterward.
-
-	* install_any.pm: removed some more logs.
-
-	* keyboard.pm: keep track of unknown keyboard (for upgrade)
-
-	* install_steps_interactive.pm: modified def_mark to 59 (gl hw
-	acceleration level) and upgrade use this level
-	for newbies so.
-	make sure a recommended upgrade get the minimum and a little more (80).
-	choose default size according to a default mark (currently 49).
-
-2000/11/27  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_consts.pm: added isdn Gazel card 10b5 1151
-
-2000/11/27  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (@bad_types): list of the different type of extended
-	partitions
-	(important_types): remove @bad_types from important_types
-
-2000/11/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ru.po: updated Russian file
-
-2000/11/24  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: doc + split
-
-	* netconnect_new.pm: added depmod after having writed modules.conf
-
-	* standalone/mousedrake: splited
-
-2000/11/24  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: avoid .la files for selection.
-
-	* install_steps.pm: added missing portmap.
-
-2000/11/23  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet2: progressbar.
-
-2000/11/23  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps_gtk.pm: updated with
-	structural change of pkgs.
-
-	* install_any.pm: removed some ugly logs.
-	updated with structural change of pkgs.
-
-	* install_steps.pm: added tempory fix for initscripts %post.
-	updated with structural change of pkgs.
-
-	* pkgs.pm: synced versionCompare() with rpmtools-2.1-4mdk.
-	removed ugly log on transaction.
-	added special case to avoid counting kernels space when upgrading
-	as these package are not upgraded (just installed).
-	Memory usage optimization, change structure of storing
-	package informations. lot of fork to make sure of
-	freeing memory by perl (no free on used hashes or arrays
-	usable by other than perl), now upgrade takes as much as
-	install which takes at least 0.5Mb less than before.
-
-2000/11/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: put all tina stuff to weight 0
-
-2000/11/21  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfig.pm: added more subtil upgrade from /etc/X11/XF86Config* files,
-	keep
-	wacom entries.
-
-	* Xconfigurator.pm: upgrade for XF86Config, take care of resolution and
-	depth wanted.
-
-	* install_steps.pm: always try to get default from /etc/X11/XF86Config
-	removing logs.
-
-	* pkgs.pm: cosmetic changes for upgrade, removing some logs.
-
-	* install_steps_interactive.pm: removed code to ask if take care of
-	/etc/X11/XF86Config* files.
-	added wait message during rebuild of rpm database as it takes some time.
-
-	* Xconfigurator_new.pm: WARNING
-
-2000/11/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: updated Azeri file
-
-2000/11/20  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: clean up as today filelist is no more.
-	use parsehdlist from rpmtools-2.1-3mdk or above instead of
-	perl code from DrakX forking to simulate a filelist server.
-	this increase performance by 100 to 150% on selection of
-	packages to upgrade.
-
-	* share/list: added parsehdlist.
-
-	* c/stuff.xs.pm: removed logs.
-
-2000/11/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/Cards+: add radeon
-
-	* install_steps_auto_install.pm (exitInstall): fix message
-
-	* install_steps.pm (afterInstallPackages): moved the
-	writeandclean_ldsoconf here
-
-	* fsedit.pm: add /var/ftp and /var/www in the list of propose mount-points
-
-2000/11/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: add openuniverse to the list of gl apps
-
-2000/11/16  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: corrected isdn_get_{list, info}
-
-2000/11/16  François Pons  <fpons@mandrakesoft.com>
-
-	* share/list: include /usr/lib/rpm/macros else rpmlib gets crazy :-)
-
-	* modules.pm: tempory version for current glibc, a lot of module have been
-	removed due to
-	problem of stage1 increase in size when compiled with glibc-2.2 and
-	current
-	modutils.
-
-	* c/Makefile.PL: updated with rpmlib 4.
-
-	* c/stuff.xs.pm: completed something that seems to work almost correctly
-	at the first look
-	with rpmlib 4.
-
-2000/11/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: add netscape-german, thx to florin
-	isdn4k-utils gets same weight as isdn4net, thx to Florin
-
-2000/11/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-	* share/po/sk.po: updated Slovak file
-
-2000/11/15  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: added isdn_get_list and isdn_get_info
-	calls modules::write_conf to fill the modules.conf.
-
-	* Xconfigurator_new.pm: added to fork frontends backends. Not operationnal
-	at all for now.
-
-	* modules.pm: when loading a new module, add an alias for it, even in
-	standalone mode.
-
-2000/11/15  François Pons  <fpons@mandrakesoft.com>
-
-	* c/stuff.xs.pm: updated for rpm 4.
-
-	* pkgs.pm: rpmdepOrder again (for new TAGp)
-
-2000/11/15  Pixel  <pixel@mandrakesoft.com>
-
-	* c/Makefile.PL: add librpmio
-
-	* c/stuff.xs.pm: workaround for kernel-headers not in sync with glibc
-	(dev_t)
-
-2000/11/14  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: better structure for the ethx-driver.
-	added call to add_alias and write_conf
-
-	* standalone/draknet2: updated
-
-2000/11/14  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: removed foreach (<... which are eating memory
-	fork install on upgrade for searching trhough filelist, this saves
-	about 20Mb of memory before rpmlib transaction are started so its is
-	more than 2 times faster for upgrading a system, sorry it was
-	effectively
-	a machine two overloaded that makes the upgrade slower.
-	make rpmlib not to check size as DrakX should do it.
-	added special cases for selection of packages according to files, avoid
-	all kde-i18n packages if their locales-$lang is not selected, avoid
-	a -devel package if only one files is updated (typical for fixes on
-	package by moving files around).
-	
-	deactivated rpmdepOrder as it should be done directly in
-	depslist.ordered
-	file.
-	
-	fixed obsoletes which never run correctly, even if almost no package are
-	selected explicitely this way.
-	
-	added log during selection of packages to upgrade to keep a track of
-	what DrakX is doing.
-
-	* modules.pm, network.pm, netconnect.pm, common.pm, modparm.pm,
-	Xconfig.pm, commands.pm, lang.pm, fsedit.pm, detect_devices.pm,
-	printer.pm, Xconfigurator.pm: removed foreach (<... which are eating
-	memory
-
-2000/11/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2000/11/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: Integrate Till's patches for better work with Cups.
-
-2000/11/12  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/mousedrake: fix for bug #1350
-	(mousedrake dies with: Undefined subroutine &mouse::serial_ports_names)
-
-	* pkgs.pm (psUpdateHdlistsDeps): fixed an ugly typo (uses .cz2 for .cz and
-	.cz22 for
-	.cz2) that makes for than one CD install breaks :-(
-
-2000/11/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-2000/11/10  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet2: draknet2 : new version of draknet, post-install
-	only, uses only libDrakX backend, beautyfull
-
-	* netconnect_new.pm: completed adsl_conf_backend
-	corrected conf_network_card_backend : return interface and module
-	separately
-	splitted pppconfig.
-
-2000/11/10  François Pons  <fpons@mandrakesoft.com>
-
-	* share/po/fr.po: typo fixing
-
-	* printerdrake.pm: fixed wrong case for managing IP for remove CUPS server
-	updated typo for remote CUPS server configuration dialog
-
-2000/11/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sk.po, share/po/lv.po: updated Latvian and Slovak files
-
-	* share/po/wa.po, share/po/da.po: updated Danish and Walloon files
-
-2000/11/10  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm: initIMPS2 move where it should be (in non-C_RPM dependent
-	section)
-
-2000/11/09  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: added handling for 2 ethernet cards with the same module
-
-2000/11/09  François Pons  <fpons@mandrakesoft.com>
-
-	* share/po/fr.po: add some missing translation (mainly printer for CUPS
-	remote config)
-
-	* printer.pm: make sure to restart cups when cupsd.conf is modified.
-
-	* printerdrake.pm: fixed modification of BrowsePoll on a existing file.
-
-2000/11/08  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: updated
-
-2000/11/08  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: make sure class discarding do not destroy result
-
-	* pkgs.pm: added new function for selected or installed accessor on pkg
-	make sure package already installed for oem are marked as selected, as
-	some
-	code refer to this state to perform some actions (install_urpmi)
-
-	* install_steps.pm: fixed for urpmi again;
-
-	* printerdrake.pm: add management of BrowsePoll <ip>:<port> in
-	/etc/cups/cupsd.conf
-
-	* printer.pm: add minimal management of /etc/cups/cupsd.conf
-
-2000/11/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/MonitorsDB: Fixed Samsung SyncMaster 3Ne (bug #1136)
-
-2000/11/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/es.po: updated Spanish file
-
-2000/11/07  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: now there are 8 ttyS* available for configuration. Used for
-	internal modem configuration that uses ttyS* > 3
-
-	* netconnect_new.pm: ttyS0 -> ttyS7 available for configuration
-	some doc
-
-2000/11/07  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed text for card prefered in XFree 3.3 (RIVA128).
-
-	* install_steps_interactive.pm: use of install_any::boot_medium to avoid
-	listing medium used for boot
-
-	* install_any.pm: use of $boot_medium where the boot medium is used
-	(default 1)
-
-2000/11/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/Cards+: fix tseng server for ET4000 W32i, W32p thanks to
-	<sileryti@mail.com>
-
-2000/11/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): in oem, configureX automatic
-	(main): $::oem is now global :-(  (needed in install_steps.pm)
-
-	* install_steps.pm (afterInstallPackages): give medium 'cdrom' to
-	install_urpmi in case of $::oem
-
-2000/11/06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: backend/frontend fork complete
-
-	* any_new.pm: load_thiskind changed to load_thiskind_backend, the wait
-	function is passed by argument
-
-	* network.pm: configureNetwork2 commented.
-
-2000/11/06  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: created function for examining already installed package on
-	install (oem).
-
-	* install2.pm: add a flag to allow by default formating /
-
-	* install_steps.pm: conditionnal format of / and use already installed
-	packages if any on install.
-
-2000/11/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/MonitorsDB: added Hitachi CM753 contributed by Adam Julius
-	<ajulius@yahoo.com>
-
-2000/11/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/ru.po, share/po/uk.po: updated pot file
-	GRUB/LILO/SILO messages *must* be in ascii only. Changed cyrillic to
-	ascii transliteration for them
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
-	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* keyboard.pm, ChangeLog: added the 3 kbd layouts for CZ and SK kbds
-
-2000/11/06  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (formatPartitions): formatMountPartitions done even in
-	upgrade
-	(main): set $o->{partitioning}{use_existing_root} in oem
-
-	* install_steps.pm (doPartitionDisksAfter): remove the mount_all which is
-	plain dumb
-	(doPartitionDisksAfter): fs::mount_all moved here
-	(doPartitionDisks): use $o->{partitioning}{use_existing_root}
-
-	* install_any.pm (use_root_part): fs::mount_all really removed
-	(use_root_part): fs::mount_all removed
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): don't propose
-	already mounted partitions
-	(installCrypto): nicer layout
-
-2000/11/05  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: changed 'IntelliMouse label' to 'Generic PS2 Wheel Mouse'
-
-2000/11/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/MonitorsDB: added LG StudioWorks520Si contributed by Yves Maniette
-	<yves@maniette.com>
-
-2000/11/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eo.po: updated Esperanto file
-
-2000/10/31  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: continuing forking frontend - backend. adsl ist
-	nearly finished
-
-	* any_new.pm: added this file to fork frontends and backends in any.pm
-
-2000/10/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: heartbeat pixel wonderful un chien vaut mieux que deux
-	tu damsera
-
-2000/10/30  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po: updated Walloon file
-
-	* share/keyboards.tar.bz2: updated keyboards
-
-2000/10/30  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (load_po): backslash @ in po strings, otherwise the eval fails
-
-2000/10/28  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: new version of draknet. Splited frontends - backends
-
-2000/10/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-2000/10/27  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: remove the noising rpm output command line when loging
-	installed rpm
-	size (only usefull for live_update and just for conveniance).
-
-	* pkgs.pm: Make sure $meta_class is defined in readCompsUsers (for HTTP
-	hack)
-	before reading a compssUsers file.
-
-	* live_install: add VERSION in list of file that have to be symlinked.
-
-	* common.pm: list_skels returns list of existing directory and writeable.
-
-	* live_install2: Make sure to remove font path in /tmp/drakx before
-	exiting.
-
-2000/10/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/tr.po, share/po/it.po: updated Italian and
-	Turkish files
-
-2000/10/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: fortune-mod gets 10/0/10 on request from egil
-
-2000/10/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pl.po: updated Polish file
-
-2000/10/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ca.po: updated Catalan file
-
-2000/10/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, ChangeLog, diskdrake.pm: added some carriage returns
-	to please jl :)
-
-	* detect_devices.pm (floppies, probeall): add require "modules" as it
-	should be
-
-	* install_interactive.pm (partitionWizardSolutions): add "require
-	resize_fat::main" as it should be
-
-2000/10/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: linuxconf-gui got -1/-1/-1 while gnome-linuxconf has
-	74/0/74
-
-2000/10/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/uk.po, share/po/tr.po, share/po/az.po: updated Azeri, Turkish
-	and Ukrainian files
-
-2000/10/20  fabman
-
-	* share/po/es.po: updated
-
-2000/10/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: ntp to -1/-1/-1
-
-2000/10/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: put all packages requiring kde1-compat to 0 except
-	kisdn-free
-	aumix now gets a high weight (79) because it's required to save the
-	mixer
-	settings at shutdown
-
-2000/10/19  Pixel  <pixel@mandrakesoft.com>
-
-	* share/locales.tar.bz2: fix symlink zh_CN.GB2312 (was zh_CN.G23212)
-
-2000/10/19  tlb
-
-	* share/po/da.po: 100%, Troels Liebe Bentsen.
-
-2000/10/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: Added AZeri file
-
-	* share/po/no.po: updated Norwegian file
-
-2000/10/17  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm, netconnect.pm, netconnect_consts.pm: removed unused
-	code in ineractive_gtk
-	added some isdn card in pcitable
-	corrected typos, and made ISA isdn work
-
-2000/10/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/lv.po: updated Latvian file
-
-2000/10/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-	* standalone/keyboarddrake, keyboard.pm, ChangeLog: corrected BackSpace
-	setting
-
-2000/10/16  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (cdroms): fix the setting of scdX for ide burners
-
-	* share/compssList: sympa is -1 except for server
-
-	* keyboard.pm (write): small pixelization (neater now)
-
-	* install_steps.pm (installPackages): don't run ldconfig in g_auto_install
-
-2000/10/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-
-2000/10/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, keyboard.pm: small fix for Swedish locale
-
-	* share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/fr.po,
-	share/po/wa.po, share/po/de.po: updated Bulgarian file
-
-2000/10/13  François Pons  <fpons@mandrakesoft.com>
-
-	* partition_table_empty.pm: empty partition table as assumed only if the
-	MBR is really composed of only null chars.
-
-2000/10/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: added viavoicemenu
-
-2000/10/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (ask_mntpoint_s): dqs
-
-2000/10/11  Pixel  <pixel@mandrakesoft.com>
-
-	* .cvsignore: ignore flog files
-
-	* install2.pm (main): test
-
-	* ChangeLog: qsdqsd
-
-	* install_steps_interactive.pm: * (selectKeyboard): set default
-	$o->{langs} to $o->{lang}
-
-2000/10/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw, ChangeLog: make only one call to urpmi in order to
-	install all the needed rpm's
-
-2000/10/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po, share/po/es.po: updated Norwegian file
-
-	* share/po/pl.po: updated Polish file
-
-	* share/po/zh_CN.GB2312.po, share/po/zh_TW.Big5.po: updated Chinese file
-
-2000/10/10  tlb
-
-	* share/po/da.po: 99%.
-
-2000-10-10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: make only one call to urpmi in order
-	to install all the needed rpm's
-
-2000-10-10  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-10  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: increase $::VERSION
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: update after Dam's new messages in netconnect
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (kdeicons_postinstall): remove the handling of
-	doc desktop icons. see dadou
-
-2000-10-09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssUsers: new list (with icons)
-
-	* share/list: add icons for compssUsers
-
-2000-10-09  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: added wait message
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Pixel  <pixel@mandrakesoft.com>
-
-	* share/themes-*.rc: change the fg[INSENSITIVE] entry
-
-2000-10-09  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: added tuxracer in OpenGL games to install if an
-	accelerated card has been found.
-
-2000-10-09  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (main): asking connection after writing start/stop scripts.
-	(adsl_conf): if during install, don't use chkconfig, make the
-	links directly for the adsl init script.
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): UserView in kdmrc is
-	now true by default. So put false if security >= 3 instead of
-	removing it.
-
-2000-10-09  François Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: default speed of modem set to 115200.
-
-	* fs.pm: fixed format of RAID partition.
-
-	* install_interactive.pm: take into account RAID partitions for
-	searching / partition.
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (selectKeyboard): don't assume $o->{langs} is set
-	(selectLanguage): don't set $o->{langs} (so that you can go back
-	and it works)
-
-	* common.pm (round_up, round_down): ensure number is an integer
-
-	* install_steps_interactive.pm (chooseGroups): take into account
-	the min_level to compute the size
-
-2000-10-08  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): move the
-	computing of max_size before calling chooseGroups (not the one for
-	desktop meta_class)
-	(chooseGroups): compute the size of Miscellaneous
-
-2000-10-07  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssList: don't install locales-* even in 'all' install
-	(those files are usefull if RPM_INSTALL_LANG doesn't include that
-	lang)	
-
-2000-10-07  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-07  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (install): log the gonna be installed packages (-> be
-	able to track not installed packages that should have been
-	installed)	
-
-2000-10-06  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (pppConfig): the domain used for kppp is copied in resolv.conf
-	(intro): connection detection improved : now use "ifconfig | grep interface"
-	(pppConfig): corrected cnx_up/down
-
-2000-10-06  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-06  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): don't fail if
-	kdeglobals file is not there	
-
-	* share/compssUsers.desktop: fix icons
-
-	* detect_devices.pm (cdroms): fix for scsi cdrom drives
-
-	* pci_probing/pcitable: put cs46xx instead of snd-card-cs461x
-	(dixit jeff)
-
-	* diskdrake.pm (Resize): comment ext2&reiserfs resizing for the
-	moment	
-
-2000-10-06  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* Xconfigurator.pm (write_XF86Config): added mode of wacom devices
-
-2000-10-06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (ask_connect_now): connection is now tested.
-
-2000-10-06  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps_gtk.pm: updated
-	license.
-
-	* Xconfigurator.pm: removed Matrox G200/G400 3D acceleration by
-	DRI, use only Mesa with Utah GLX, fixed autologin for avoiding
-	drakres and no wm available, moved Riva128 card from experimental
-	to stable, fixed presentations of text.
-
-	* pci_probing/pcitable: fixed Cirrus Logic sound card.
-
-2000-10-06  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-06  François Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: fixed bad call to hasUsb...
-
-	* share/Cards+: fixed wrong use of SiS card with 4.0.1, only keep
-	530, 620 and 6326 with XFree 4.0.1.
-
-2000-10-06  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-06  Pixel  <pixel@mandrakesoft.com>
-
-	* share/list: remove /usr/X11R6/lib/X11/Cards, not needed anymore	
-
-	* install_steps.pm (afterInstallPackages): put the Charset in
-	kdeglobals, otherwise kde uses charset iso8859-1 :(
-
-	* lang.pm (charset): created
-
-	* common.pm (update_userkderc): fix it, change the argument
-	passing	
-
-2000-10-05  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssList: raise kde-i18n-*, should be installed whenever
-	kdebase is installed
-
-	* pci_probing/pcitable: integrate patch from viet (concerns
-	sym53c8xx cards)
-
-	* share/compssUsers: use "documentation" as the database icon
-
-	* install_steps_interactive.pm (chooseGroups): fix to accept icons
-	not in the format "*_section.xpm"
-
-	* install2.pm (miscellaneous): put yes/no in sysconfig/usb entries	
-
-2000-10-05  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (adsl_conf): updated pppoe conf.
-	(main): added $netc->{minus_one} to avoid to count dhcp configured
-	eth when asking to share the connection.
-	(adsl-pppoe): improvement. Should work now.
-	(miscellaneous): corrected chmod 755 to 744 for connections scripts
-
-	* netconnect.pm (main): network is stopped then started, instead
-	of restarted.
-
-2000-10-05  François Pons  <fpons@mandrakesoft.com>
-
-	* live_install: added icons (this fixes the yellow on white
-	tooltips problem).
-
-	* install_any.pm: added ghostscript-utils in the list of packages
-	to copy when changing CD.
-
-	* printerdrake.pm: install ghostscript-utils if a lexmark printer
-	is selected on cups.
-
-2000-10-05  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (loadO): look for auto_inst.cfg in /, not in
-	/Mandrake/base	
-
-2000-10-05  François Pons  <fpons@mandrakesoft.com>
-
-	* netconnect.pm: fixed syntax error.
-
-	* share/po/i18n_compssUsers: simplified version and fixed
-	dependancies to pkgs.pm (for building drakxtools).
-
-2000-10-04  François Pons  <fpons@mandrakesoft.com>
-
-	* install_gtk.pm: removed 80 pixel on height for live upgrade.
-
-	* install_steps.pm: do not set keyboard when live upgrade after
-	setting the language.
-
-	* install_steps_gtk.pm: fixed the trying to start a X server on
-	live.
-
-2000-10-04  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/i18n_compssUsers: fake module ``c'' so that no need to
-	build DrakX to use i18n_compssUsers
-
-	* install_steps_interactive.pm (selectLanguage): update license
-
-	* install_steps_gtk.pm (installPackages): add second license for
-	shitty soft (commercial one)
-
-2000-10-04  dam's  <damien@mandrakesoft.com>
-
-	* draknet (netconnect.pm and network.pm): various translations
-	corrected, network is restarted, buttons connect/disconnect
-	debugged. 
-
-2000-10-04  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-04  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (main): kill prefdm instead of autologin
-
-	* install_any.pm (find_root_parts): don't use
-	suggest_mount_points, it couldn't do what we wanted	
-	(guess_mount_point): created, contains the common stuff between
-	suggest_mount_points and find_root_parts
-
-2000-10-04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: fix some failing/untranslated i18n messages
-
-	* share/po/fr.po: write translations according to drakgw
-	
-2000-10-04  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: removed bad card for 3D Rage Pro.
-
-	* install_any.pm: removed Aurora for SiS card, add more case for
-	detecting right cdrom for live upgrade, fixed wrong list of
-	packages for laptops.
-
-	* c/stuff.xs.pm: added time interval of 200ms between update of
-	progression bar of install, make sure the last step is seen.
-
-2000-10-04  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (when_load): stricter regexp for $type is scsi or not
-	(so that scsi_mod with is scsi_raw doesn't get an alias
-	scsi_hostadapter)	
-
-	* detect_devices.pm (isLS120Drive): extend the regexp to include
-	"Caleb Technology - 144MB FDD UHD Floppy"
-
-	* detect_devices.pm (burners, IDEburners): reworked, renamed, now
-	works!	
-	* c/stuff.xs.pm (isBurner): created
-
-	* modules.pm (load_ide): make sure ide-cd is loaded!
-
-	* install_steps_interactive.pm (chooseGroups): the label and help
-	are now translated (at least will be), so use the translations
-
-2000-10-03  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile (DrakX.pot): added the to-be-translated from
-	compssUsers
-	* share/po/i18n_compssUsers: read the compssUsers's and output the
-	to-be-translated in po format
-
-	* log.pm (l): log to STDERR instead of STDOUT
-
-	* install_any.pm (loadO): use first floppy drive available (won't
-	help much though, as stage1 doesn't follow this...)
-
-2000-10-03  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-03  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (autologin): don't propose autologin in
-	security > 3
-
-	* common.pm (availableRamMB): HACK HACK if i810 and memsize,
-	returns 127
-
-	* bootloader.pm (suggest): don't use grub if more than 800MB
-
-2000-10-04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/validate.pl: create this tool
-	
-	* share/po/fr.po: fix many typos
-
-	* share/po/fr.po: make compssUsers translation
-
-2000-10-03  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: changed resolution allocation.
-
-	* fs.pm: removed no more used log.
-
-	* install2.pm: add exit button if live upgrade.
-
-	* install_any.pm: increased minimal available size to 65Mb.
-
-	* install_steps.pm, standalone/printerdrake: fixed cups to CUPS
-	for mode.
-
-	* printerdrake.pm: fixed not_edit for lpr mode of printerdrake.
-
-	* share/Cards+: fixed Savage2000 entry.
-
-2000-10-03  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-03  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: updated bad card with Rage Mobility card.
-
-	* live_install: added test of root user, abort if not root.
-
-2000-10-03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fixed bug #518 and fixed other misc errors
-
-2000-10-03  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-02  François Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm (Resize): fix to make ext2resizing work a little
-	better	
-
-	* install_steps.pm: fixed installation of urpmi configuration.
-
-	* detect_devices.pm: updated comment about UltraDMA66/100
-	management.
-
-	* modules.pm: updated comment about UltraDMA66/100 management.
-
-	* diskdrake.pm: adding a cylinder for the minimum of the resize
-	and if there is nothing to do for resize, simply return.
-
-	* install_any.pm: added missing require pkgs.
-
-2000-10-02  Pixel  <pixel@mandrakesoft.com>
-
-	* many files: remove many lnx4win special cases which are not
-	needed anymore        
-	
-	* any.pm (addUsers): grpuser output goes to Mr Dave
-
-	* bootloader.pm (install_lilo): change the default color of menu
-
-	* install_steps_interactive.pm (choosePackages): add 300MB choice
-	in desktop
-
-	* mouse.pm (fullnames): fix i18n fix
-
-	* install_steps.pm (miscellaneous): don't add ide2=0x... for
-	ultra66 (otherwise chmouel is not happy, so is hdc being hde)
-	
-	* Xconfigurator.pm (main): add handling of icewm logout
-
-	* c/stuff.xs.pm: changed the stepping of "Progressing installing package"
-
-2000-10-02  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (main): infos are written only when needed.
-	* netconnect.pm (intro): connection checking now works.
-	
-2000-10-02  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* pci_probing/pcitable: s|snd-card-via686a|via82cxxx_audio|; like
-	jeff request.
-
-2000-09-30  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-30  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: a LOT of bugs fixed. draknet is now completely
-	brok^H^H^H^Hfrozen.
-
-2000-09-29  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-29  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (adsl_conf): dhcp should better work.
-
-	* network.pm (configureNetwork): remove connection script if a
-	gateway is given.
-
-	* common.pm (setVarsInShMode): created. chmod the file with
-	permissions passed in argument.
-
-2000-09-29  François Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm (load): fixed when standalone, use modprobe.
-
-	* pkgs.pm: added preference for wu-ftpd.
-
-	* detect_devices.pm: added code to proble USB printer.
-
-	* printer.pm: fixed missing PRINTER=yes on CUPS configuration for
-	USB printer.
-
-	* install_steps.pm: removed possibilty to add an user in urpmi
-	group (jloup).
-
-	* install_steps_interactive.pm: log if CD not ejectable.
-
-2000-09-29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: sync with latest packages
-
-	* install_steps_interactive.pm (selectLanguage($)): s/42/43/ in
-	  MandrakeSoft physical address 
-
-2000-09-29  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-29  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (intro): detection of internet
-	configuration/connexion state.
-	
-	* network.pm (write_resolv_conf): better "ppp temp nameserver" in resolv.conf
-
-2000-09-28  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (load_thiskind): add read_already_loaded cuz of
-	pcmcia	
-
-2000-09-28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: add nasty DrakSync and DrakProfile with 50 0 50
-
-2000-09-28  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): the minimum is 25
-	in beginner, not 10
-
-	* pkgs.pm (readCompssUsers): fix reading description
-
-	* install_steps.pm (afterInstallPackages): remove the code to
-	handle RPM-GPG-KEYS
-
-2000-09-28  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_list_with_helpW): no more theme
-	parsing, no more draknet.rc
-
-	* netconnect.pm (read_net_conf): no adsl tree anymore.
-
-	* netconnect.pm: drakgw called if enough card are installed.
-
-	* netconnect.pm: minor bugs correction.
-
-2000-09-28  François Pons  <fpons@mandrakesoft.com>
-
-	* Makefile.config: added livedrake for drakxtools.
-	* diskdrake.pm: use corrected partition size when resizing a dos
-	partition (like the others).
-	* install_any.pm: no more pnm2ppa packages and others in package
-	to copy when changing CD.
-	* live_install: exec live_install2 instead.
-	* live_install2: contains post live upgrade stuff now.
-	* printerdrake.pm: protect set_help() usage by if $::isInstall,
-	removed reference to package pnm2ppa and others.
-	* standalone/livedrake: initial release for drakxtools.
-
-2000-09-28  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm (partitionWizardSolutions): fix the limit
-	cases for lnx4win	
-
-	* share/po/Makefile ($(PMSCFILES)): fix the DrakX.pot generation	
-
-2000-09-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): set $size2install
-	to $availableC in desktop install, as it should be
-
-	* install2.pm (choosePackages): remove the code for removing kdesu
-	in high security...
-
-	* install_steps_interactive.pm (createBootdisk): format more
-	nicely the text
-
-	* install_steps_gtk.pm (installPackages): add 10 seconds to have a
-	better estimation
-
-	* install_steps_interactive.pm (chooseGroups): now returns a boolean
-	(choosePackages): use chooseGroups return value to redo
-	choosePackages	
-
-	* install_steps_gtk.pm (selectMouse): if mouse type is none, then
-	don't test!
-
-	* Xconfigurator.pm (monitorConfiguration): rename Unlisted to Custom
-
-	* various: replace all Rescue by Update
-
-	* pkgs.pm (readCompssUsers): read description for groups
-	
-	* install_steps_interactive.pm (chooseGroups): add description for
-	groups	
-
-2000-09-27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssUsers.desktop: added description
-
-	* share/compssUsers: added description
-
-	* share/compssUsers.desktop: added icon support, reordered,
-	  renamed
-
-	* share/compssUsers: reordered, renamed
-
-2000-09-27  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectLanguage): intregrate
-	license again
-
-	* pkgs.pm (readCompssUsers): reads compssUsers.meta_class
-
-	* diskdrake.pm (Create): replace ``ne "i386"'' by ``!~ /i.86/''
-	(as should be)
-
-	* install_steps_gtk.pm (selectInstallClass1): if @$l (list of
-	install classes) contains only one element, call
-	install_steps_interactive::selectInstallClass1	
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): fix for
-	"no partitions selected to format"
-
-	* my_gtk.pm (_create_window): alt-e now *toggles* expert/newbie	
-
-2000-09-27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: more for gnupg, -11 for sucking things,
-          changed compss-groups to be less than 70.
-
-	* share/compssUsers: modified compssUsers with Warly, added
-          compssUsers.desktop, simplified for KD (now uses Graphical
-	  Desktop/KDE instead of listing all relevant packages)
-
-2000-09-27  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (get_info_adsl_providers, read_adsl_providers):
-	Created. adsl provider tree. 
-	(set_net_conf): better informations storing.
-
-	* my_gtk.pm (new): windows are always centered if standalone.
-
-2000-09-27  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added option "sw_cursor" for S3 Trio3D. fixed
-	3D hw acceleration for i815 (VideoRam). prefer XF3 for all
-	NeoMagic cards.
-	* install_gtk.pm: re-enabled themes on live upgrade but without
-	modifying background image.
-	* install_steps_gtk.pm: fixed missing help.
-	* live_install: lot of fixes to enable DrakX font, keep upgraded
-	system clean (libperl.so which allows graphical login).
-	* pkgs.pm: added function allowedToUpgrade to filter kernel
-	package.
-
-2000-09-27  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (configureX): if `clicked' don't go
-	to auto mode
-
-	* Xconfigurator.pm (monitorConfiguration): fix the translated
-	'Generic' which is not so (and must not be so) anymore
-
-2000-09-26  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm: remove all Unskip code
-
-	* my_gtk.pm (_create_window): add shortcut alt-e to switch to
-	expert
-
-	* Xconfigurator.pm (resolutionsConfiguration): fix for setting
-	legal resolution
-
-	* install_steps_interactive.pm (selectLanguage): use formatAlaTeX
-	on the license
-
-2000-09-26  François Pons  <fpons@mandrakesoft.com>
-
-	* fs.pm: added mounting of swap partition when mounting them
-	all (this can help :-) 
-	* pkgs.pm: fixed correction size code to make (really) a true
-	bijection between corrected and rpm size.
-
-2000-09-26  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectLanguage): integrate the
-	license (temporary one)
-
-	* modules.pm (write_conf): fix the /etc/modules generation
-
-	* interactive_gtk.pm (ask_many_from_listW): if more than 5 entries
-	in icon format, use scrollbar. In non-icon format, use scrollbar
-	for more than 11 entries.
-
-	* commands.pm (bug): add ddcxinfos
-
-	* pci_probing/pcitable: replace tulip by de4x5 for 2104x cards	
-
-2000-09-26  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added more 3D Rage Pro card for 3D
-	acceleration with Utah-GLX (Rage Mobility, Rage XC/XL),
-	modified identification for checking acceleration.
-	* install_any.pm: added automatic installation (up 60) for
-	OpenGL games if a graphic card MAY BE accelerated.
-	* live_install: fixed perl idioms in pure shell script and added
-	packdrake symlink if not already installed.
-	* share/compssList: changed level to -1 for all needing 3D hw
-	acceleration packages.
-
-2000-09-26  dam's  <damien@mandrakesoft.com>
-
-	* network.pm (write_resolv_conf): write temp dns line to be used
-	with new initscripts package. Use to set dns live.
-
-2000-09-26  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-26  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm (read): catch exception if fullname2mouse fails (eg:
-	old FULLNAME format)
-
-2000-09-25  Pixel  <pixel@mandrakesoft.com>
-
-	* share/MonitorsDB: merge with latest redhat MonitorsDB
-
-	* pci_probing/pcitable: major merge with latest redhat pcitable
-
-	* share/Cards+: added "Intel 815", renamed "Rage 128 (generic)" to
-	"Rage 128", added "Rage 128 Mobility"
-
-	* install_any.pm (getAvailableSpace): keep 10% of free space on
-	big partitions
-
-	* Xconfigurator.pm (readMonitorsDB): don't translate Generic
-	(otherwise, only a part is translated, see MonitorsDB for the
-	non-translated part)
-
-	* interactive.pm (ask_many_from_list): fix sorting
-
-	* install_gtk.pm (test_mouse): smaller box to fit in 640x480
-
-	* install_steps.pm (afterInstallPackages, beforeInstallPackages):
-	RPM-GPG-KEYS is copied before installing packages
-
-	* pkgs.pm (readCompssUsers): handle icons in compssUsers
-
-	* common.pm (truncate_list): ensure the list is not too big
-
-	* install_steps_gtk.pm (choosePackagesTree): restrict the list to
-	20 elements if it is too big (use truncate_list)
-
-2000-09-25  François Pons  <fpons@mandrakesoft.com>
-
-	* bootloader.pm: add Video mode for entry.
-	* fs.pm: updated for live upgrade.
-	* install2.pm: dropped unuseful steps filtering.
-	* install_any.pm: fixed wrong Device3Dfx package name and clean
-	postinstall rpms directory on upgrade before filling it.
-	* install_gtk.pm: removed window restrictions of live upgrade.
-	* install_steps.pm: fixed initrd symlink following in case of
-	upgrade.
-	* install_steps_gtk.pm, install_steps_interactive.pm: keep always
-	upgrade on live upgrade.
-	* modules.pm: may fixed pcmcia lost driver (typically on network).
-	* pkgs.pm: fixed (uggly?) usage of floating perl data on perl
-	script :-)
-	* printer.pm: back to "Generic PostScript" for default printer (jloup).
-	* printerdrake.pm: make sure an expert can choose among available
-	devices.
-
-2000-09-25  dam's  <damien@mandrakesoft.com>
-
-	* network.pm (write_resolv_conf): write '# ppp temp entry adsl' in
-	/etc/resolv.conf if needed.
-
-	* netconnect.pm : adsl connection does'nt need any dns anymore.
-
-	* netconnect.pm (read_net_conf): created. draknet now stores and
-	reload the config.
-	
-	* netconnect.pm (main): if the user is french and uses french
-	keyboard, don't ask his country.
-
-2000-09-25  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: added 8139too
-
-	* share/Cards+: GeForce2 DDR is handled by driver "nv"
-
-	* Xconfigurator.pm (main): in killall X for Xdrakres, also killall
-	kdm/xdm/gdm/autologin :)
-
-2000-09-25  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-25  dam's  <damien@mandrakesoft.com>
-
-	* network.pm (configureNetwork): Warn user if he already
-	configured the interface.
-
-2000-09-24  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (mergein_conf): created. call read_conf, fills
-	%modules::conf and set $modules::scsi
-
-2000-09-24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw (fatal_quit($)): add log of reason of fatal_quit
-
-2000-09-24  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-24  Pixel  <pixel@mandrakesoft.com>
-
-	* commands.pm (bug): use first floppy drive instead of fd0 hard
-	coded (nice for LS120's)
-
-	* install_steps_gtk.pm (selectMouse): if device changed, do the
-	test	
-	* standalone/mousedrake: fix for serial mice
-	* install_steps_interactive.pm (selectMouse): fix for serial mice
-
-2000-09-23  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (conf_network_card): now displays the modules of
-	detected ethernet cards.
-
-2000-09-22  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (main): calls drakegw.
-	* netconnect.pm (get_net_device): fixed
-
-2000-09-22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw:
-	  - added logs
-	  - added verbose mode
-          - fixed wrong stopping of named in other languages than english
-
-	* netconnect.pm (get_net_device): try to fix it..
-
-2000-09-22  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectKeyboard,
-	choosePartitionsToFormat, chooseCD, installCrypto): use new ask_many_from_list
-	(): 
-
-	* interactive.pm (ask_many_from_list): now only ask_many_from_list
-	exists, obsoleting ask_many_from_list_ref and
-	ask_many_from_list_with_help. More flexible and nicer
-	* interactive_newt.pm (ask_many_from_listW): adapted to new
-	calling type
-	* interactive_gtk.pm (ask_many_from_listW): adapted to new calling
-	type, handle 'shadow' and 'icon2f'
-
-2000-09-22  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): if /lnx4win/i in VERSION, set $o->{lnx4win}
-
-	* Xconfigurator.pm (cardConfiguration): fix setting 4MB of meg for
-	i810	
-	(testFinalConfig): i810 is a verybad_card, aka can't test anything
-	on it :-(
-	(main): fork to background and stay there while waiting for the WM
-	to exit
-	(testFinalConfig): update the backgroung image path
-
-	* interactive_gtk.pm (exit): flush X before leaving (otherwise the
-	mousecursor is not restored)
-
-	* run_program.pm (rooted): don't redirect the stdout and stderr to
-	ddebug.log if not $::isInstall
-
-	* log.pm (l): log on stdout/stderr if !isInstall and !isStandalone
-
-	* modules.pm (load_raw): redirect stderr to tty5
-
-	* install2.pm (main): set variable $::isInstall
-
-2000-09-22  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: now includes information from netconnect to
-	ignore the interface used for Internet connection
-
-2000-09-22  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm (selectInstallClass1): pixel's typo.
-
-	* netconnect.pm (get_net_device): added get_net_device to know
-	which interface has been used to configure the internet connection.
-	(conf_network_card): ask to restart network if dhcp too.
-	(main): enable dialing when modem.
-
-	* network.pm (configureNetworkIntf): changed label to warn people
-	about already configured eth cards.
-
-2000-09-22  François Pons  <fpons@mandrakesoft.com>
-
-	* install_gtk.pm: added Desktop themes.
-	* share/themes-mdk-Desktop.rc, share/themes/mdk-Desktop-bg.png:
-	initial release.
-	* install2.pm: moved back to all steps for live upgrade.
-	* install_gtk.pm: select right logo if desktop.
-	* install_steps_interactive, install_steps_gtk.pm: avoid asking if
-	upgrade for a live upgrade.
-
-2000-09-22  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: add some call to log_sizes to log the
-	installed size
-
-	* install_steps_gtk.pm (installPackages): beep before changeMedium		
-
-2000-09-21  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_listf): try to call the f translation
-	function on the default value with the index
-
-	* install_steps.pm (afterInstallPackages): make the gpg code work,
-	changed the call to 
-	"gpg --fast-import --homedir /etc/rpm /root/tmp/RPM-GPG-KEYS"
-
-	* detect_devices.pm: cleanup and removed unused code
-
-2000-09-21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* detect_devices.pm (getNet()): really remove plip in standalone
-
-2000-09-21  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm, netconnect.pm: changed NETWORKING reference
-	from false to no.
-	* printer.pm: changed timeout from 30 to 60.
-	* printerdrake.pm: added wait message when waiting for cups to
-	start.
-	* pci_probing/pcitable: added erwan VIA Rhine board.
-	* network.pm: added DHCP_HOSTNAME reference.
-
-2000-09-21  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-21  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/keyboarddrake: fix for XF4
-
-	* Xconfigurator.pm (write_XF86Config): comment the omit
-	xfree86-dga	
-
-	* install_steps.pm (afterInstallPackages): configure GPG public
-	keyring with mandrake key	
-
-	* standalone/mousedrake: updated/fixed for new mouse handling	
-
-	* install2.pm (main): update for handling oem installs
-
-	* many files: relGetFile cleanup, updated calls to getFile and
-	getAndSaveFile accordingly
-
-	* Xconfigurator.pm (testFinalConfig): new XFdrake-image-test.jpg
-
-	* detect_devices.pm (@netdevices): plip removed in standalone,
-	otherwise plip is always there (because of kmod)
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): replace
-	the die "cancel" by die "already displayed", so that no error is
-	displayed.
-
-	* pci_probing/pcitable: replace some rtl8139 by 8139too, added
-	cards DELTA8139 and ADDTRON8139 (for jeff)
-
-	* Xconfigurator.pm (show_info): also show the colordepth and
-	resolution. don't show server if none, show XF4 driver if there's
-	one.	
-	(main): change the "Forget the changes" to "Keep the changes?"
-	with displaying the current configuration.
-
-2000-09-21  François Pons  <fpons@mandrakesoft.com>
-
-	* printer.pm: changed "PostScript" ppd default description to "Raw
-	queue (no filtering)", asked by Till.
-	* Xconfigurator.pm: add log of what user select for 3D hw
-	acceleration.
-	* share/compssList: changed XFree86-glide-module to -2 because the
-	level is the same for XFree86-Glide* which may have multiple
-	different version installed due to dependancies of the first one.
-
-2000-09-21  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (conf_network_card): added check when dhcp. Cable connection
-	should now work.
-
-2000-09-21  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (exitInstall): call $o->exit if
-	"Some steps are not completed"
-
-2000-09-20  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (install_loadlin_config_sys,
-	install_loadlin_desktop): extracted from install_loadlin, do not
-	call them anymore (remove it?)
-	(suggest): put grub in lnx4win install
-
-	* common.pm (availableRamMB): fixed (round to a multiple of 4)	
-
-2000-09-20  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (get_info_isdn_providers & read_isdn_providers):
-	read file in /usr/share and $prefix/usr/share 
-	(isdn_write_config): corrected file to be sh compliant.
-	(isdn_write_config): added default route settings for isdn.
-
-2000-09-20  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-20  Pixel  <pixel@mandrakesoft.com>
-
-	* pci_probing/pcitable: replace es1371 by snd-card-ens1371
-
-2000-09-20  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm (autologin): for urpmi, added `--best-output' and suspend/resume 
-
-2000-09-20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/printerdrake: for urpmi, added `--best-output' and suspend/resume 
-
-	* standalone/XFdrake: for urpmi, added `--best-output' and suspend/resume 
-
-2000-09-20  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: used new package install function.
-
-2000-09-20  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (isFloppyOrHD): detects wether a device is a
-	floppy or not based on its size (for scsi floppy)
-
-	* Xconfigurator.pm (testFinalConfig): check if "server" OR
-	"driver" field is set (otherwise XF4 only card won't pass)
-
-	* bootloader.pm (suggest): fix for ``installing the last cooker
-	from kenobi:/I on an smp machine i don't get anymore an entry for
-	linux-up'' (c chmouel)
-
-2000-09-20  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (read_isdn_providers): corrected typo ($_ -> $_[0])
-
-2000-09-20  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-19  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (get_pcmcia_devices): fix (especially, now ethernet
-	should be detected)
-
-	* lang.pm (get_langs): created, gives rpm install langs
-	* install_any.pm (setPackages): give langs::get_langs() to
-	readCompssList	
-	* pkgs.pm (readCompssList): don't use RPM_INSTALL_LANG, use given
-	$langs instead. This fixes the RPM_INSTALL_LANG=all install.
-
-2000-09-19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* netconnect.pm: make dhcp-client, pump and such not translatable.
-	Those are program names and should therefore not be translated,
-	that only confuses translators
-
-2000-09-19  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm (autologin): corrected @users definition and
-	passwd cat.
-
-2000-09-19  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-19  Pixel  <pixel@mandrakesoft.com>
-
-	* many files: changed some access to get_root to get_root_	
-	
-	* install_steps_interactive.pm (choosePackages): added code for
-	desktop meta_class install type
-
-	* install_steps_gtk.pm (selectMouse): cleanup, give parameter
-	emulate3buttons to setMouseLive
-	* c/stuff.xs.pm (setMouseLive): add argument emulate3buttons
-
-2000-09-19  Guillaume Cottenceau <gc@mandrakesoft.com>
-
-	* interactive*.pm: changed `suspend' and `resume' to behave as expected,
-	added `enter_console' and `leave_console'
-
-2000-09-19  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-19  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (miscellaneous): replaced LITTLE_FRIED_OIGNONS by
-	META_CLASS
-
-	* Xconfigurator.pm (cardConfiguration): when ddcxinfos gives false
-	result (not enough VideoRam), also remove the found resolutions
-	* Xconfigurator.pm (main): remove the automatic searching of
-	resolutions	
-	* Xconfigurator.pm (resolutionsConfiguration): cleanup, remove the
-	automatic searching of resolutions.
-
-	* mouse.pm (fullnames): changed the `_' in `[' before Other
-	(nicer, uh?)
-
-	* install2.pm (selectMouse): changed clicked to !first_time
-
-2000-09-19  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-19  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (testFinalConfig): remove the bloody prototype
-
-2000-09-19  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-18  Dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator (autologin): do it eve, if newbie. Autologin is
-	now in separated function.
-	
-2000-09-18  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (testFinalConfig): don't skip the test in auto
-	if called via "Test again"
-	* Xconfigurator.pm (resolutionsConfiguration): ensure all depth
-	are bounded
-
-	* bootloader.pm (suggest): don't put "linux-nonfb" if "linux" is
-	classic and no-fb
-
-	* fsedit.pm (check_mntpoint): add a check for /etc /lib... which
-	must not be mount points. Also check that /home, /tmp and /usr are
-	on trueFS
-
-	* interactive.pm (ask_from_entries_ref): add bounding of "val" in
-	case of type "range". die if min > max.
-
-2000-09-18  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-18  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): nicer
-	partition/device display
-
-	* partition_table_raw.pm (zero_MBR): add on the fly require of the
-	good partition_table_$type
-
-	* detect_devices.pm (cdroms): fix (yet again) the scd$nb device
-	assignment to ide burners
-
-	* install_steps.pm (afterInstallPackages): comment out a part of
-	the icons mess messing
-
-	* Xconfigurator.pm (cardConfiguration): move Unlisted to
-	Other/Unlisted
-	* share/CardsNames: updated (for Voodoo5)
-
-	* install_steps_gtk.pm (selectMouse): fix the test to know wether
-	the guy has changed the mouse type (to know wether to test the
-	mouse or not)
-
-	* install_steps_interactive.pm (selectLanguage): add the license
-	
-	* install_steps_interactive.pm (choosePackages): have the
-	"Recommended" size be the default 
-	(in the choice Minimum/Recommanded/Complete)
-	
-	* diskdrake.pm (Type): fix a typo
-
-	* install_steps.pm (doPartitionDisksAfter): mark partition as
-	mounted	
-
-2000-09-17  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-17  Pixel  <pixel@mandrakesoft.com>
-
-	* install/pcmcia_config.patch: cleaned
-	
-	* diskdrake.pm (Create, Type): have type field not_editable
-
-	* tools/make_mdkinst_stage2: use TMPDIR if available
-
-2000-09-16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): move
-	the setting of toFormat before asking for bad blocks, seems to fix
-	things?? weird :-/
-
-	* network.pm (miscellaneousNetwork): fix the setting of focus on
-	error (tx2Thomas Poindessous :)	
-
-	* install_steps_interactive.pm (configurePrinter): changed
-	"Cancel" to "None" (for Thomas Poindessous :)
-
-	* printer.pm (poll_ppd_base): max polling time raised from 10s to
-	30s (for Till)	
-
-	* install_steps.pm (ask_mntpoint_s): don't force partition type to
-	be ext2 (at least if it's a known fs) (for Warly)
-
-2000-09-15  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (set_help): save the help message displayed
-	in $o->{current_help}
-	* install_gtk.pm (create_big_help): display $o->{current_help}
-
-	* mouse.pm: reworked quite a lot. Now sorts/categorize nicely the mice.	
-	* install_steps_interactive.pm (selectMouse): adapted for reworked mouse.pm
-	* install2.pm (selectMouse): adapted for mouse::read now returning
-	an hash ref
-
-	* detect_devices.pm (hasMousePS2): remove hasMouseMacUSB, do it in
-	one function (now takes the device in the parameter)
-
-	* interactive.pm (ask_from_treelistf): added (just like
-	ask_from_listf, but with a tree)
-
-	* Xconfigurator.pm: the reference is now nbuttons to
-	know wether to put Emulate3Buttons or ZAxisMapping.
-	* Xconfigurator.pm (cardConfiguration): install Glide_V3-DRI on
-	Banshee too.
-
-	* Xconfig.pm: guess nbuttons based on Emulate3Buttons and
-	ZAxisMapping.
-
-	* common.pm (availableRamMB): replace availableRam, now use the
-	size of /proc/kcore (what else to find the real ramsize?)
-
-	* common.pm (cat__): created
-
-	* install2.pm (main): add field meta_class in $o. Can be
-	'desktop', in case option desktop is given, or if /desktop/i is
-	found in /VERSION
-
-	* install_steps.pm (miscellaneous): for lnx4win, always have
-	'mem=' (so that the initrd is visible by both windows
-
-	* install2.pm (main): add option "desktop"
-
-	* install_any.pm (generate_ks_cfg): fix for new(?) $o->{intf} format
-
-	* install_interactive.pm (partitionWizardSolutions): 
-	use only TrueFS for existing_part
-	(partitionWizard): have only "loopback" for lnx4win
-
-	* pci_probing/pcitable: associate Voodoo5 with Voodoo5
-
-	* share/Cards+: add Voodoo5
-
-	* bootloader.pm (suggest): add entry linux-nonfb (called linux-up
-	for smp)
-
-2000-09-14  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-12  François Pons  <fpons@mandrakesoft.com>
-
-	* detect_devices.pm, mouse.pm: moved probing serial port before to
-	detect a wacom tablet (even if a PS/2 or USB mouse is found).
-	* help.pm: corrected reference to previous version of LM (jloup).
-	* install2.pm: removed duplicate code for getting network
-	configuration, using network module.
-	* netconnect.pm: intf is now a hash and no more an array.
-	* network.pm: changed nature of intf to hash from array, reworked
-	write_resolv_conf function to keep old code in comment but only
-	when not used anymore (to make it easier by hand modification).
-	* printer.pm: SOCKET accessible to expert only (jloup).
-	* printerdrake.pm: local port only available for expert if a
-	printer has been detected (jloup).
-
-2000-09-11  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: reorganized choices of 3D optimizations, added
-	experimental support for expert users.
-	* install_steps_interactive.pm: removed question to keep XF3.
-
-2000-09-05  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: removed all previous URI specific mode and
-	added socket and expert URI general mode.
-	* printer.pm: fixed bugs, start lo interface before cups.
-
-2000-09-04  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: added pnm2ppa and lm110 support in cups
-	configuration. probe for printer device (parallel) and try to
-	install usb for printer.
-	* printer.pm: removed local printer configuration for cups (keep
-	only local configuration using URI).
-
-2000-09-01  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixes to configure XF86Config-4 when XFree-3.3
-	is installed, make 16bits by default on 3D hardware acceleration,
-	fixed selection of hardware for hardware acceleration.
-	* install_steps.pm: add cups for printer configuration, used for
-	auto_install. added new function to add packages only if requires
-	are already satisfied.
-	* standalone/printerdrake: updated.
-
-2000-08-31  dam's  <damien@mandrakesoft.com>
-
-	* moved many things to network.pm and any.pm
-	* everything should be broken now.
-
-2000-08-31  François Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: removed printer default config (now obsoleted).
-	* install_steps_interactive.pm: add cups support.
-	* printerdrake.pm: add cups support.
-	* printer.pm: add cups support.
-
-2000-08-31  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* install_any.pm (setPackages): install the right glide module
-	according to the Voodoo card detected.
-
-	* Xconfigurator.pm (write_XF86Config): ZAxisMapping for XF 4.
-	(autoDefaultDepth): default depth to 16 for Voodoo cards except
-	for Voodo5 ones.
-
-2000-08-29  dam's  <damien@mandrakesoft.com>
-
-	* moved pppConfig in netconnect.pm and any.pm
-	* moved miscellaneousNetwork in any
-	* modem configuration is now useable in standalone mode.
-
-2000-08-29 David BAUDENS <baudens@mandrakesoft.com>
-
-	* install_steps_interactive.pm: change Small/Normal/Full ->
-	  Minimum/Recommanded/Complete (aka make FredB happy)
-
-2000-08-28  dam's  <damien@mandrakesoft.com>
-
-	* draknet (netconnect): renamed drakfuck -> draknet. standard ADSL
-	and french alcatel ADSL implemented.
-	* Xconfigurator.pm (autologin) : use of the new autologin system.
-
-2000-08-24  François Pons  <fpons@mandrakesoft.com>
-
-	* ../update_kernel*: changed reference from extract_archive to
-	packadrake.
-	* Makefile*: added live_install and live_install2.
-	* Xconfigurator.pm: updated Mach64 acceleration to only 3D Rage
-	Pro AGP card type, commented SiS and S3ViRGE support by GLX.
-	* commands.pm, keyboard.pm, lang.pm, pkgs.pm, list, tools/*:
-	updated to use packdrake now.
-	* install2.pm, install_steps.pm, install_steps_gtk, Makefile*:
-	manage live upgrade.
-	* modules.pm: use standard modprobe command for load in live
-	upgrade.
-	* netconnect.pm: added minimal modification for being compilable.
-	* rescue/list: added packdrake and sfdisk.
-	* live_install, live_install2: live upgrade of package.
-
-2000-08-22  dam's  <damien@mandrakesoft.com>
-
-	* drakfuck (netconnect):finished isdn PCI/ISA card implemetation
-	* added isdndb.net: providers database
-
-2000-08-20  dam's  <damien@mandrakesoft.com>
-
-	* moved Netconnect.pm to netconnect.pm
-	* moved DrakFuck to drakfuck
-
-2000-08-18  Pixel  <pixel@mandrakesoft.com>
-
-	* share/Cards+: for i810, force VideoRam
-
-2000-08-18  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: added isdn type in @drivers_by_category. corrected
-	load_thiskind (thx pixel) : it's not unsafe anymore
-	* Netconnect.pm: just display PCI isdn card recognized.
-	
-2000-08-17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: many cleanup. moved some functions to common,
-	any or install_interactive (newly created)
-
-2000-08-16  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm(configureNetwork): added call to
-	isdn configuration
-	* added standalone/DrakFuck: standalone entry point to configure
-	internet connexion.
-	* added Netconnect.pm: internet connexion functions.
-
-2000-08-11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectInstallClass): yet a bigger
-	warning so that people don't choose expert installs. Also set the
-	focus on "Custom" by default.
-	
-	* install_steps_interactive.pm (doPartitionDisks): created, calls
-	the wizard.
-	* install_steps.pm (doPartitionDisksBefore,
-	doPartitionDisksAfter): created (was mainly in
-	install2::doPartitionDisks)
-	* install2.pm (doPartitionDisks): much cleanup
-	* install_any.pm (partitionWizard): working state (still rough)
-
-2000-08-08  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/rpmdrake (AddMedia): fix the ftp addmedia, fix the
-	cdrom addmedia
-
-2000-08-07  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Resize): 
-	* install_steps_gtk.pm (doPartitionDisks): remove the
-	before_leaving ensuring the filehandle is closed
-	* resize_fat/main.pm (DESTROY): use a better solution for ensuring
-	the filehandle is closed
-
-2000-08-07  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added SiS6326 in the list of chipset that
-	needVideoRam, reported on ml.
-	* install_steps.pm: fixed auto install of printer.
-
-2000-08-06  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_listf): created this GREAT function
-	that should have been created a long time ago.
-	* any.pm, install_any.pm, install_steps_gtk.pm,
-	install_steps_interactive.pm: a lot of rewrite to use the new
-	ask_from_listf, a lot of nice cleanup!
-
-	* fs.pm (df): created, returns the free space of the part. Save it
-	in $part->{free}
-
-	* install_steps_gtk.pm (doPartitionDisks): ensure the closing of
-	the device in case of error
-	* resize_fat/main.pm (new): ensure the closing of the device in
-	case of error
-
-	* install_any.pm (partitionWizard): the great partitioning wizard
-	is created. Not finished yet (nor called from anywhere)
-
-	* install_steps.pm (doPartitionDisksLnx4win): created function out
-	of doPartitionDisks
-
-	* install_steps_gtk.pm (installPackages): removed the displaying
-	of size to install (people are bothered cuz not the same size)
-
-2000-08-06  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm (create_steps_window): use drawing area
-	instead of button. Implemented all steps events. 
-
-2000-08-05  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm (detect): test a hack for usb mouse via hub
-	(sparhawk@enteract.com)	
-
-	* fsedit.pm (undo): force isDirty and needKernelReread only if hd
-	hasBeenDirty, otherwise believe the flag saved
-	* partition_table.pm (write): flag hd as hasBeenDirty
-
-	* install2.pm: a few renaming of methods so that the step names
-	correspond to install2 function and install_steps* methods (eg:
-	configureX & setupXfree unified to configureX)
-
-2000-08-04  dam's  <damien@mandrakesoft.com>
-
-	* any.pm (setAutoLogin): added this method to write xdm-config
-	* Xconfigurator.pm: clenead autologin code and use of above method
-
-2000-08-04  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (setSelectedFromCompssList): save $nb to able to restore
-	it in case of max_size reached. only purpose is the log!
-
-	* install_steps_interactive.pm (choosePackages): in newbie, ask
-	between Small/Medium/Full install
-	* install_steps_interactive.pm (choosePackages): in expert, have
-	the min_mark be 0 instead of 1
-
-	* common.pm (find_index): added this nice function
-
-	* install_any.pm (getAvailableSpace_mounted): use common::df
-	* loopback.pm (getFree): use common::df
-	* commands.pm (df): use common::df
-	* common.pm (df): added
-
-	* diskdrake.pm (Resize)): add resizing of reiserfs
-	* share/list.i386: add resize_reiserfs
-
-
-2000-08-02  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm : autologin is functionall. When wmsession.d is
-	more up to date, I'll add the list of wm to launch at boot. It
-	writes in /etc/X11/xdm/xdm-config.
-	
-2000-08-01  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (miscellaneous): modify as chmouel want (aka, ""
-	instead of "no" for MOUSE and KEYBOARD in sysconfig/usb)
-
-	* services.pm: separation between interaction and action.
-	* install_steps.pm (servicesConfig): the job is now done here	
-	* install_steps_interactive.pm (servicesConfig): only the asking
-	part	
-
-2000-08-01  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed the below fixe, now ok.
-	* Xconfigurator.pm: fixed a bug for using default card flags
-	setting, add support for GeForce DDR for both 3.3 and 4.0.
-	* pci_probing/pcitable: fixed NV15 (GeForce2) card entry, now use
-	XFree 3.3 as unsupported in XFree 4.0.
-	* share/Cards+: added "NVIDIA GeForce2 DDR (generic)".
-
-2000-07-31  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed provided package with choice in deps used with a
-	base package, complicated but kernel-fb or similar can be
-	unselected now.
-
-2000-07-27  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: changed expert message to ask
-	using XFree 3.3 instead of XFree 4.0 used by default (server).
-	* Xconfigurator.pm: make sure only one server is installed,
-	default to XFree 4.0 if supported unless XFree 3.3 accept
-	3D acceleration and not XFree 4.0, ask user in such case.
-	* pci_probing/pcitable: added Intel 815 pci ids.
-
-2000-07-26  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm: applied new LN stars, logo title and help
-	logo. improved steps appearences.
-	* modified share/step-*.xpm
-	* added share/help.xpm
-	* updated ../HACKING to ling help logo.
-
-2000-07-21  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: enable 3D acceleration configuration with
-	XFree86, use /usr/X11R6/lib/modules/glx-3.so for X version 3
-	Utah-GLX accelerated module.
-
-2000-07-20  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: use {miscellaneous}{autologuser} instead of
-	{miscellaneous}{autologuser} + {miscellaneous}{autologing}.
-	* move some README content to ../HACKING
-
-2000-07-19  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: added autologin boxes.
-	result is in {miscellaneous}{autologin} and in
-	{miscellaneous}{autologuser}
-	
-2000-07-19  François Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: added default root to existing root device when adding
-	an entry in bootloader.
-	* bootloader.pm: avoid duplicating entry (floppy and old-floppy)
-	when they are identical.
-	manage hackkernel by suggest an entry by default if installed.
-	* install_steps.pm: reworked symlink closure for bootloader
-	to keep previous configuration.
-
-2000-07-11  François Pons  <fpons@mandrakesoft.com>
-
-	* bootloader.pm: merged lilo.pm and silo.pm inside bootloader.pm,
-	this include a configure_entry from silo.pm to build a initrd if
-	used.
-	* share/compssList: added kde2 packages.
-	* share/compssUsers: added kde2 group, renamed kde to kde1 group
-	specific.
-
-2000-07-07  François Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm (choosePackages): always execute setPackage to copy
-	hdlist* and depslist files (support mixed partitionDisks and
-	choosePackages).
-	* install_any.pm (setPackages): avoid clearing upgrade flag.
-	* install_steps.pm (choosePackages): use $first_time to avoid
-	reselection of packages according to compssList.
-	* install_steps_interactive (choosePackages): use $first_time and
-	$individual to avoid reselection of packages according if user go
-	back to step choosePackages.
-	* pkgs.pm: added psUpdateHdlistsDeps to restore hdlist* and
-	depslist files in /var/lib/urpmi.
-	* diskdrake.pm: fixed uneditable combo for Mount point action.
-
-2000-06-23  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: better approach for Sun* server in newbie.
-	* fs.pm: added romfs support for mount.
-	* fsedit.pm: changed auto allocation for partitions for sparc*.
-	* install2.pm: restored bootdisk creation and auto install boot
-	disk creation for sparc*.
-	* install_any.pm: changed vfat to romfs when mounting kickstart
-	floppy on sparc*.
-	* install_steps.pm: avoid proposing formating sunos partition.
-	* install_steps_interactive.pm: boot disk for sparc* and support for
-	installation of SILO on /boot partition (sparc*).
-	* install_steps_newt.pm: removed cylinder 0 bug warning.
-	* interactive.pm: fixed typo for not_edit set to 1 by default.
-	* partition_table.pm: fixed get_holes on sparc* where a whole disk
-	partition caused problems.
-	* partition_table_sun.pm: removed cylinder 0 bug as found in mke2fs.
-	* silo.pm: handle /boot partition, install silo.conf in /boot and
-	make a symlink from /etc.
-	* share/list.sparc: added losetup and genromfs for boot disk creation.
-
-2000-06-21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: changed the way console font data is written; not all
-	of the [0], [1], [2] values must defined, so three cases must be used.
-	Also added a variable $CHARSET for /etc/sysconfig/i18n; it can then
-	be used by console-tools to load the proper compose table
-
-2000-06-20  François Pons  <fpons@mandrakesoft.com>
-
-	* c/sbus.c: added some functions for silo.c integration.
-	* c/silo.c: initial release including write in prom, and translation
-	of disk name from openprom to linux, rh version modified.
-	* silo.pm: added write in prom, support of sunos boot from silo.
-	* partition_table.pm: added support for ufs partition like windows one.
-	* install_steps_interactive.pm: added other entries in silo.
-	* install_steps.pm: support sunos partition.
-	* install_any.pm: automatically mount sunos partition with diskdrake.
-	* fsedit.pm: added /mnt/sunos suggested mount point.
-	* fs.pm: added ufs support for mount.
-
-2000-06-19  François Pons  <fpons@mandrakesoft.com>
-
-	* crypto.pm: modified for getting sparc crypto file for sparc*.
-	* modules.pm: make sure to load sd_mod when needed.
-	* pci_probing/main.pm: always use loaw_endian in pci structs.
-	* pci_probing/translate-pcitable.pl: added arch specific module name
-	translation.
-
-2000-06-16  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (write_conf): rename conf.modules to modules.conf if
-	needed. Outputs to modules.conf
-
-	* detect_devices.pm (cdroms): fix using scd0 for ide-burners when
-	already a scsi cdrom drive
-
-2000-06-13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* pkgs.pm: added 'acon' requirement for all right-to-left languages
-
-2000-06-07  François Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm: added SunOS partition as blue for diskdrake.
-	* install_steps_interactive.pm: make sure of no division by zero may
-	happen.
-	* install_steps_newt.pm: added WARNING for fdisk on sparc*.
-	* modules.pm: make sure of loading sd_mod module after any scsi module.
-	* sbus_probing/main.pm: insmod openprom before trying sbus probing.
-	* pkgs.pm: corrected by use of parabolic solution for size approximation.
-	* silo.pm: try with "silo -p 2 -t" if "silo -t" has failed due to bad probe.
-
-2000-06-05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* install_steps.pm,lang.pm: added load_console_font, to load the 
-	proper console fonts (text mode install is not very useful otherwise)
-
-2000-06-03  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Create): don't accept less than 32MB part for reiserfs
-	* diskdrake.pm (Type): don't accept less than 32MB part for reiserfs
-
-2000-06-01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/fonts.tar.bz2: replaced the Korean 16pt fonts by a 12pt font;
-	it fits better with the other fonts. Added a 'README' file with
-	some comments and the required copyright notice
-
-2000-05-29  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added support for SBUS card autodetection.
-	* commands.pm: added lssbus to list SBUS devices detected.
-	* detect_devices.pm: removed alpha restriction on USB.
-	* install_steps_interactive.pm: added SBUS support.
-	* c/sbus.c: initial revision, core SBUS support (inspired from kudzu).
-	* c/stuff.xs.pm: added wrapper for sbus.c interface.
-	* sbus_probing/main.pm: initial revision (inspired from kudzu).
-
-2000-05-27 Adam Lebsack <adam@mandrakesoft.com>
-
-	* share/list.ppc: various PPC modifications, for HFS
-	* partition_table_mac.pm: bug fixes
-	* partition_table.pm: various HFS fixes, isHiddenMacPart()
-	* diskdrake.pm: added HFS to top buttons when run on PPC
-	* keyboard.pm: fixed name of mac-fr2-ext keymap
-	* install_steps_gtk.pm: added Xpmac server support for PPC.
-	* install_steps_interactive.pm: disallow hardware configuration on PPC for
-	now.  All drivers should be in the kernel. setup_this_kind().
-	* fsedit.pm: fixed verify_hds for PPC, /proc/partitions will never match
-	our partition table read.  Added PPC grep condition for PPC in get_visible_fstab.
-	* fs.pm: fix argument for HFS formatting.	
-	* Makefile: special installation of PPC files.
-
-2000-05-25  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* standalone/drakboot: Don't display Configure-/LILO/GRUB/ on
-	alpha|sparc.
-
-2000-05-25  François Pons  <fpons@mandrakesoft.com>
-
-	* silo.pm: added configure_entry to try creating an initrd for an image
-	entry in bootloader. fixed wrong usage of run_programm::rooted with 2>.
-	* commands.pm: fixed insmod command to take modules64.cz* on sparc*
-	* install2.pm: removed create boot disk and create auto install disk on
-	sparc*. force writing of /etc/conf.modules for step setupBootloader.
-	* install_steps.pm: fixed upgrade for sparc* and disable supermount for sparc*.
-	* install_steps_interactive.pm: added missing $prefix for glob_. call
-	configure_entry in setupSILO. fixed cancel or None entry on setupBootloader.
-	* modules.pm: updated alias for sparc*.
-	* any.pm: fixed proprable wrong test for setupBootloader in beginner at
-	the very beginning.
-	* printer.pm: fixed typo.
-	* Xconfigurator.pm: avoid testing if using a Sun* server, added depth and
-	resolution for these server too.
-
-2000-05-24  François Pons  <fpons@mandrakesoft.com>
-
-	* partition_tabel.pm: fixed wrong detection of DOS partition on sparc*.
-	* partition_table_sun.pm: fixed a bug when reading partition table
-	with unused partition in the middle of the table.
-
-2000-05-23  François Pons  <fpons@mandrakesoft.com>
-
-	* common.pm: update arch to take into account sparc and sparc64. added
-	better_arch and compat_arch function.
-	* silo.pm: fixed adding new kernel automatically.
-	* install2.pm: removed create boot disk stuff for sparc*.
-	* install_steps.pm: added initrd generation for alpha. added ldconfig
-	at end of installation. removed /usr/bin/dumpkeys existence test on
-	sparc*, should be added in the future.
-	* install_steps_interactive.pm: removed supermount for sparc*.
-	* install_steps_gtk.pm: added /dev/kbd device creation and permedia2
-	support for sparc*. removed screen limit of 1024x768.
-	* detect_devices.pm: fixed problem on machine with really no IDE interface.
-	* modules.pm: added support for 32 and 64 bit architectures on sparc*.
-	* install_any.pm: fixed getAvailableSpace_mounted if /usr is not a separate
-	partition.
-	* pkgs.pm: added support for multi-arch rpm file (need for sparc*),
-	fixed correctSize and invCorrectSize to take back a linear approximation
-	above 9Gb approximatively. removed ftp rewind as broken currently.
-	* keyboard.pm: fixed bad list of available keyboard (broke sparc*), fixed
-	globing (removed) against existing '*'.
-	* partition_table.pm: removed support for non SUN partition table, as it
-	may freeze the kernel or may be blanked?
-	* Xconfigurator.pm: take Sun24 server by default on sparc*, add support
-	for permedia2 card (3DLabs server).
-	* share/list.sparc: added perl-5.6.0 for sparc*, fixed for sparc*.
-	* Makefile: added support for modules and modules64 for sparc*.
-	* c/stuff.xs.pm: added kernel_arch function for getting the current true
-	architecture provided by the kernel (uname -m).
-
-2000-05-09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (kdeicons_postinstall): the URL link to doc must
-	be $lang/index.html, not only $lang.
-
-	* standalone/mousedrake: add handling of XF86Config-4
-
-	* any.pm (setupBootloader): fix bug (was adding 2 glob_'s)
-
-2000-05-08  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): move the touch of some files here to please linuxconf
-	
-	* install2.pm (miscellaneous): s/KBD/KEYBOARD/
-
-	* lilo.pm (install_grub): don't keep symlinks for reiserfs
-	* lilo.pm (suggest): allow grub everytime now (not only if !reiserfs)
-
-	* install_any.pm (getHds): default mount point for windobe in
-	lowercased for StartOffice(!)
-
-2000-05-08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/keyboards.tar.bz2: Fixed Brazilian keyboard (.br); added
-	  Iranian (.ir), Arabic (.ar) and new Lithuanian (.lt_new) keyboards
-	* keyboard.pm: Added new Lithuanian keyboard and changed the
-	  string for brazilian ABNT-2 to state more clearly its ABNT nature
-	  (it is not a standard PC keyboard; it uses some different keycodes)
-
-2000-05-07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (choosePackages): return availableCorrected
-	instead of available
-
-	* pkgs.pm (correctSize): add 18MB for full multi-cd (many hdlist's)
-
-	* modules.pm (text2driver): same as text2lang below
-	* keyboard.pm (text2keyboard): same as text2lang below
-	* lang.pm (text2lang): replace the while (... each) by a foreach
-	(keys) (because each is dangerous if loop is exited)
-
-	* install_steps_interactive.pm (selectKeyboard): better handling
-	of multiple langs question.
-
-	* ftp.pm (new): Timeout set to 60 (seconds), was default (120)
-
-	* install_steps_interactive.pm (setup_thiskind): remove ide-*
-	from modules displayed as loaded.
-
-2000-05-06  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm (check_mntpoint): verify that standard mntpoints (/
-	/usr) are not on not trueFS
-
-	* any.pm (setupBootloader): add $prefix for the 2 glob_'s
-
-2000-05-07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/keyboards.tar.bz2: added Ukrainian keyboard xmodmap.ua
-
-2000-05-06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* printerdrake.pm: fixed English error
-
-2000-05-05  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): remove the special case
-	for fbdev.
-
-	* install_steps_interactive.pm (setup_thiskind): replace return by
-	next in case load_module fails.
-
-	* install_steps_gtk.pm (selectInstallClass1): translate Install/Upgrade
-
-	* Xconfigurator.pm (cardConfiguration): force xf4 for rage 128's
-	* Xconfigurator.pm (testFinalConfig): force $bad_card for xf4
-
-	* pkgs.pm (correctSize): updated for 7.1
-
-	* install_any.pm (getAvailableSpace): move the removing of
-	$minAvailableSize here.
-
-2000-05-04  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (configurePrinter): give clicked to printerConfig
-
-	* interactive.pm (ask_from_entries_ref): set default val if not_edit
-
-	* interactive_newt.pm (ask_from_entries_refW): remove setting of
-	default val. Now done in interactive::ask_from_entries_ref
-
-	* interactive_gtk.pm (ask_from_entries_refW): handle empty value
-
-	* modules.pm (read_already_loaded): ensure that already loaded
-	modules are put in %loaded.
-	* modules.pm (load_ide): add loading if ide-probe-mod (for new kernel)
-
-	* lilo.pm (install_lilo): truncate label's to 15 chars
-
-	* install_any.pm (generate_ks_cfg): fix missing space
-	* install_any.pm (generate_ks_cfg): fix bug for nfs comand
-
-	* install2.pm: get rid of autoformat
-	* install_steps.pm (choosePartitionsToFormat): get rid of autoformat
-
-2000-05-03  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (setupBootloader): replace ask_many_from_list by
-	ask_from_list for bootloader choice
-
-	* services.pm (drakxservices): stop immediately service if removed
-
-	* install_steps.pm (configureNetwork): replaced dhcpxd by dhcpcd
-	* install_steps.pm (afterInstallPackages): touch some files to
-	please linuxconf
-
-2000-05-03  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: updated min size, fixed kppprc generation.
-	* install_any.pm: make sure postinstall-rpm is here before
-	erasing (avoid error on reboot only).
-
-2000-05-02  Pixel  <pixel@mandrakesoft.com>
-
-	* raid.pm (format_part): don't call raid::make if part is already
-	formatted (as raidstop fails)
-
-	* Xconfigurator_consts.pm: Rage128 and 3dfx are not available any
-	more	
-
-	* install_steps_interactive.pm (setup_thiskind): make insmod'ing
-	fail a simple warning.
-
-	* Xconfigurator.pm (readMonitorsDB): adapt to new MonitorsDB
-	* share/MonitorsDB: take new one from RedHat
-
-	* standalone/drakboot: added kfloppy
-
-	* g_auto_install: add $dir/lib to LD_LIBRARY_PATH (it was silly
-	not to have it)
-
-2000-05-01  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): remove
-	NIS_server, use NIS instead
-	* install_any.pm (setAuthentication): remove NIS_server, use NIS instead
-
-	* standalone/rpmdrake (AddMedia): hdlist.cz2 instead of hdlist
-
-2000-04-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): fix yet another bug for
-	ttf from windobe handling
-
-	* install_steps_interactive.pm (selectInstallClass): hide beginner
-	mode in corporate. Display special help.
-
-2000-04-29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* my_gtk.pm: added call to Gtk->init; that makes 16 bit locales
-	text to be properly aligned (reported by Craig Chang
-	<craig_chang@taipei.siscomm.com.tw>)
-	* common.pm: now that po handling is correct, I changed the order
-	of reading variables so that it follows the standards ($LANGUAGE first)
-	* share/fonts.tar.bz2, lang.pm: added an 8pt font for cp1251
-
-2000-04-28  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps*.pm: added support for selection of package during
-	upgrade the same way it is done for installation. added check of
-	minimal size, abort else (at least let the user know about :-)
-	fixed crypto if no network interface available.
-	* install2.pm: fixed problem during upgrade that lost network
-	configuration.
-
-2000-04-28  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (load_raw): don't call commands::insmod, do it in
-	place. Merge with load_multi
-
-	* install_steps.pm (afterInstallPackages): fix windobe ttfonts
-	symlinking	
-
-	* Xconfigurator.pm (cardConfiguration): load module agpgart for
-	i810
-	
-	* install_any.pm (getHds): changed the mount point setting for
-	windows partitions as device_windobe is not unique
-
-2000-04-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (create_steps_window): changed to adapt to
-	new hidden format
-
-	* install2.pm (@installSteps): changed the way hidden is handled.
-	Now it is a true perl expression (great power now)
-
-	* install_steps_gtk.pm (selectInstallClass1): update steps window
-	before asking normal/devel/server. Nicer!
-
-	* install_steps_interactive.pm (configureNetwork): when "Cancel"
-	pressed at network interface configuration do not skip all
-	configuration.	
-
-2000-04-26  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm (pppConfig): modified a lot, removed template
-	file for ifcfg and chat file.
-
-2000-04-26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (choosePackagesTree): use a fix width for
-	the tree column (so that the checkbox are always visible without
-	scrolling)	
-
-	* standalone/drakboot: drakfloppy and gfloppy are X only, no need
-	to propose them in console
-	
-	* install_any.pm (relGetFile): added auto_inst to files to get
-	from Mandrake/base
-
-	* install2.pm (main): changed auto_inst behaviour
-
-	* standalone/adduserdrake: fix a bug (s/$o/$in/g)
-
-	* interactive_newt.pm (ask_from_entries_refW): now handling
-	complete/changed/focus_out callbacks (at least more than before)	
-
-	* Newt/Newt.xs: added rough callback handling
-
-2000-04-25  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: added support for PPA more easily, allow
-	printers entry using ppa driver event if pnm2ppa not installed,
-	install it if neccessary after.
-	* network.pm, install_steps.pm, install_steps_interactive.pm:
-	added support for stoping a network interface, usefull for ppp0 to
-	avoid using it too long.
-	* install_steps.pm: fixed missing local on pap_secrets file.
-
-2000-04-25  Pixel  <pixel@mandrakesoft.com>
-
-	* lilo.pm (install): moved the generation of the keytable here. It
-	is used by both lilo & grub (lilo is not always installed as was
-	assumed)	
-
-	* common.pm (formatAlaTeX): remove bounding spaces
-
-	* pkgs.pm (setSelectedFromCompssList): remove the hack for min
-	mark 25 in beginner
-	* install_steps_interactive.pm (choosePackages): set $min_mark to
-	25 in beginner
-
-2000-04-24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setupXfree): add a yesorno
-	question for choosing between XF4 and XF3 in expert
-
-	* install_steps_gtk.pm (choosePackagesTree): enlarge the tree window
-
-	* install_any.pm (update_userkderc): make sure uid and gid are kept
-
-	* diskdrake.pm (Create): add Extended_0x85 as a choice for expert
-
-	* partition_table.pm (add_extended): handle a 3rd arg,
-	$extended_type to tell which kind of extended partition is wanted
-	* partition_table.pm (adjust_main_extended): in non-expert,
-	automatically set extended to linux-extended if there's only
-	linux-type partitions.	
-
-2000-04-22 Pablo Saratxaga <pablo@madrakesoft.com>
-
-	* install_steps_interactive.pm: s/Mb/MB/ as 'b' is symbol for bit
-	  and not for byte. RAM is expressed in megabytes -> MB
-
-2000-04-19  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fixed crazy mutli CD manipulation.
-	* printer.pm: fixed wrong prototype of print_pages.
-	* install2.pm: set version to 7.1 for crypto stuff.
-	* crypto.pm: commented ackbar crypto site.
-
-2000-04-17  Pixel  <pixel@mandrakesoft.com>
-
-	* lilo.pm (suggest): in failsafe, runlevel ASKRUNLEVEL (handled by
-	linuxconf)	
-
-2000-04-14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): don't
-	ask about checking bad blocks for reiserfs, cuz not handled
-
-	* fs.pm (mount): reiserfs handling
-	* fs.pm (format_reiserfs): added
-	* fs.pm (write_fstab): add option "notail" for reiserfs if
-	the partition holds the kernel (/boot or /)
-
-	* partition_table.pm (isTrueFS): added, replaces most occurences
-	of isExt2
-
-2000-04-12  François Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: force installation step if package have been
-	selected on step choose packages.
-	* install_any.pm: protected against die in perl (setstep or
-	theme_changed).
-
-2000-04-11  François Pons  <fpons@mandrakesoft.com>
-
-	* resize_fat: added some limits verification.
-	* interactive_gtk.pm: corrected swap of arg with help adding.
-
-2000-04-10  François Pons  <fpons@mandrakesoft.com>
-
-	* interactive_gtk.pm, my_gtk.pm: added tooltips for ask_from_list,
-	which is used by printerdrake only. drops key bindings.
-
-2000-04-07  François Pons  <fpons@mandrakesoft.com>
-
-	* tools/serial_probe: obsoleting pnp_serial which is now replaced
-	by this one, taken from kudzu, really faster and probe all serial
-	devices at one time. modified to probe correctly modem :-)
-	* mouse.pm: updated to use serial_probe interface of
-	detect_devices.pm.
-	* detect_devices.pm: modified to use serial_probe, cache probed
-	devices to avoid reprobing.
-
-2000-04-06  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps.pm: added support
-	for peerdns options of ppp, so removed dns address unless expert.
-
-2000-04-05  François Pons  <fpons@mandrakesoft.com>
-
-	* crypto.pm, install_steps_interactive.pm, install2.pm,
-	install_steps.pm: added crypto stuff to support hdlist-crypto.cz2
-	and depslist-crypto. dependancies are not supported but with a
-	simpler format of depslist file where closure are not done and
-	only package name are used for dependancies.
-	* pkgs.pm: added better support for multi CD manipulation,
-	including selection and refus.
-
-2000-04-04  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: modified selection packages from compssList by
-	incremental selection, much more quickly.
-	added selected medium for selecting a package.
-	* install_any.pm: refused media hash transfered to selected value
-	of media table.
-	@needToCopy list should only have package of default medium.
-
-2000-04-03  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (format_ext2): add options "-b 1024 -O none" for alpha
-
-2000-03-31  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: made changeMedium sub modification
-	permanent.
-	* pkgs.pm: modified upgrade to avoid use of header.
-
-2000-03-31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: some more choices for PPC keyboards
-
-2000-03-30  François Pons  <fpons@mandrakesoft.com>
-
-	* install2pm: added eval around loading af_packet and postinstall
-	copy of RPMS.
-	* devices.pm: added /dev/kdb for SPARC.
-	* install_any.pm: modified multi CD management, postinstall copy
-	of RPMS.
-	* install_steps_gtk.pm: added support for Xsun server for SPARC.
-	* install_steps_interactive.pm: added multi CD dialog box for
-	selecting CD available. Serialized ethernet configuration and ppp
-	configuration.
-	* pkgs.pm: added check for infinite recursion for bad depslist.
-	* printer.pm: better test for reparse of printerdb.
-	* Xconfigurator.pm: added support for Xsun server for SPARC.
-
-2000-03-30  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (choosePackagesTree): enhance tree selection
-
-2000-03-29  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (wait_messageW): add some padding (nicer)
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): created,
-	creates a floppy for auto installs.
-
-	* install_any.pm (generate_ks_cfg): created, generates stage1
-	ks.cfg file
-
-	* share/po/DrakX.pot: added special comment for grub entry
-
-2000-03-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectKeyboard): sort langs for
-	many-lang install
-
-	* mouse.pm (write): add WHEEL telling if a wheel mouse is there
-
-2000-03-28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: added entries for all three Armenian keyboards
-
-2000-03-26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (install_urpmi): full support for multi-hdlist's	
-
-	* pkgs.pm (extractHeaders): look for hdlist in /tmp instead of
-	$prefix/var/lib/urpmi
-	* pkgs.pm (psUsingHdlists): put hdlist's in /var/lib/urpmi with a
-	fake name. Access via /tmp/$hdlist is given for non-fake name
-
-	* detect_devices.pm (hasHPT): return undef if no htp (silly me :-/)
-
-2000-03-25  Pixel  <pixel@mandrakesoft.com>
-
-	* lilo.pm: updated to the new format of entries. It was an hash.
-	Now the key is field kernel_or_dev, and entries is an array.
-	
-	(get): added, it returns the entry using a kernel
-	   (needed because entries is no more a hash)
-
-	* install_steps_interactive.pm (setupLILO): adapted to the new format
-
-	* Xconfigurator.pm (write_XF86Config): basic XF86Config-4 handling	
-
-	* fsedit.pm (suggest_part): if suggested part contains a field
-	"hd", ensure the partition is created on this hard drive
-
-	* install2.pm (main): before leaving installation, remove
-	/var/lib/urpmi if urpmi not installed	
-
-	* diskdrake.pm (Resize): ext2resize to size $part->{size} instead
-	of $size
-
-2000-03-24  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (hasHPT): added. Now nice handling of hpt366
-	(ultra66) without rebooting and making special floppy :)
-
-	* lilo.pm (install_grub): much better grub configuration (better
-	than lilo's :pp)
-
-	* install_steps.pm (setupBootloaderBefore): remove entry floppy
-	for security > 3
-
-2000-03-23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (selectMouse): added, takes care of telling
-	the X server if the user changed the mouse type. Only done if
-	a serial mouse is chosen.
-
-	* install_steps_newt.pm (doPartitionDisks): add a call to
-
-	* mouse.pm (write): added "device=" in etc/sysconfig/mouse for
-	devfs (it looses the symlink /dev/mouse)
-
-2000-03-22  Pixel  <pixel@mandrakesoft.com>
-
-	* pci_probing/pcitable: replace Server:Rage128 by proper XFree entry
-
-2000-03-20  François Pons  <fpons@mandrakesoft.com>
-
-	* detect_devices.pm, fs.pm, install_any.pm: added supports for
-	LS-120 floppy drive and icons on desktop of KDE (untested).
-	* printer.pm, printerdrake.pm: added supports for PPA interface in
-	new rhs-printfilters, always enable "Print text as postscript"
-	option for such printers.
-
-2000-03-20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: changed XKB name for Swedish keyboard
-	  changed XKB names for Russian and German keyboards
-	  added a choice for "Croatian" keyboard
-	* share/compss{,List}: added various new locales-*, ispell-* 
-	  and netscape-* files. changed ppa to pnm2ppa.
-
-2000-03-17  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: added setup for all configured queue.
-	* install_steps_interactive.pm: modified for retrieving packages
-	or current configuration.
-	* printer.pm: correction, tested retrieve of printer
-	configuration without printtool comments in printcap file: added
-	update of entry according to gsdriver used (untested again).
-	* printerdrake.pm: better handling of cancel, manage of multiple
-	queue definition together (as lp|My printer).
-
-2000-03-16  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: moved in printerdrake.pm the test
-	of printer usage.
-	* printerdrake.pm: heavy modification to handle multiple queue,
-	corrected some bugs too, added much more features as printtool.
-	* printer.pm: added more features for filter, allow printer to be
-	retrieved without help of printtool id in printcap file (untested).
-
-2000-03-14  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Loopback): handling of the file loopback: test
-	existence of the file and take its size.
-
-2000-03-14  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: corrected for duplicate file on other CD.
-
-2000-03-13  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (floppies): don't return hash but the device name
-
-2000-03-13  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm, install_any.pm: small correction for multiple media
-	installation.
-	* tools/syncrpms: added for handling synchronisation of multiple source
-	rpm directories (and multiple target), include cleaning.
-	* tools/closurepkgs: tools to get rpm that may be installed by DrakX
-	after normal packages installation (printer, network, X11...), may
-	be used to duplicate on other CD some important stuff of the first
-	one.
-
-2000-03-12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): compute the
-	max_size very simply (sum of all package sizes), otherwise too costly
-
-	* pkgs.pm (install): call cleanHeaders at the end
-	* pkgs.pm (cleanHeaders): created
-
-	* install2.pm (miscellaneous): /etc/msec/init.sh is now
-	/usr/sbin/msec (yoann thanks for not telling :pp)
-
-	* pkgs.pm (install): remove the $prefix of mountpoints for not
-	enough room to install error message
-
-2000-03-11  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm (_create_window): add callback on focus to
-	ensure_focus. The result is no more 3 focus states with 2 buttons.
-
-	* interactive_gtk.pm (ask_from_treelistW): better keyboard handling
-
-	* raid.pm (make): check the result of mkraid. Suggest raidtools
-	are missing in standalone diskdrake
-
-	* devices.pm (set_loop): created, searches for an available
-	loopback and sets the file to it
-
-	* lilo.pm (dev2grub): fixed a missing slash
-
-	* interactive_gtk.pm (wait_message_nextW): do not update if same
-	message, otherwise silly gtk won't do anything and we'll wait
-	forever :(
-
-2000-03-10  François Pons  <fpons@mandrakesoft.com>
-
-	* *.pm: heavy modification to take into account multiple media
-	installation.
-
-2000-03-10  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (@install_classes): cleanup, no more i18n (is now in
-	install_steps_interactive), remove old entries
-
-2000-03-09  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (write_conf): don't add alias block-major-11 in every case
-	* modules.pm (add_alias): special case oss (post-installs modprobe snd-pcm-oss)
-
-	* fs.pm (format_*): move the @options before the device
-
-	* loopback.pm: created, added a lot of stuff for loopback in
-	diskdrake.pm, fs.pm...
-
-2000-03-08  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm: %type2fs replaced ox402 by 0x402
-
-	* detect_devices.pm (cdroms): fix "scd" (should be "scd0")
-
-	* install_any.pm (install_urpmi): update for new hdlist.cz2
-
-2000-03-07  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_treelistW): s/focus_row/set_focus_row/
-
-	* install_steps_interactive.pm (addUser): force add a normal user
-	for security 4
-
-2000-03-05  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm (_ask_from_list): replace focus_row with set_focus_row
-	(tis the Gtk-Perl 0.7002 was of doing)
-
-2000-03-04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (write_conf): add ide-floppy to the modprobes of
-	post-install supermount
-
-2000-03-03  Pixel  <pixel@mandrakesoft.com>
-
-	* commands.pm (ps): add RSS to ps command
-
-2000-03-02 Adam Lebsack <adam@mandrakesoft.com>
-
-	* mouse.pm: added mac mouse detection to mouse::detect.
-	* detect_devices.pm: added a routine to probe /dev/usbmouse on macs.
-
-2000-03-01  François Pons  <fpons@mandrakesoft.com>
-
-	* *.pm: heavy modification to take into account smaller
-	transaction during installation.
-	still a lot of test to perform, no provides updated currently and
-	building of hdlist.cz2 and depslist.ordered need old files...
-	nothing done for hdlist.gz during post installation, but
-	hdlist.cz2 is already copied in /var/lib/urpmi [and is used during
-	installation of packages as extract_archive need a true file].
-
-2000-03-01  Pixel  <pixel@mandrakesoft.com>
-
-	* lilo.pm (install_grub): creation
-
-	* network.pm (write_interface_conf): ONBOOT = !pcmcia
-
-	* install_steps_gtk.pm (new): more intelligent SIGCHLD handler
-
-2000-02-29  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: moved common network stuff from "net" to "network"
-	(modules like nfs lockd...)
-
-	* fs.pm (write_fstab): moved the sort to the right place
-
-	* services.pm (drakxservices): chkconfig --list is i18n'ed :(
-	set LANGUAGE=C before
-
-	* partition_table_raw.pm (get_geometry): geom{cylinders} must not
-	be a decimal value :)
-
-	* install_steps_gtk.pm (create_logo_window): set_name logo for
-	logo window
-	* share/install.rc: force disabling of background image theme
-
-	* install_steps_gtk.pm (enteringStep): add step information for
-	console 1
-
-	* any.pm (addKdmIcon): new function
-	* install_steps.pm (addUser): handle field icon
-	* install_steps_interactive.pm (addUser): add choice of kdm icon
-	* standalone/adduserdrake: add choice of kdm icon
-
-	* diskdrake.pm (ask_all_data...): change for easier i18n
-
-	* install_steps.pm (miscellaneous): add CLEAN_TMP handling
-	(need cleaning?)
-	* install_steps_interactive.pm (miscellaneous): add CLEAN_TMP
-	option in expert
-	* install2.pm (miscellaneous): add CLEAN_TMP option for
-	/etc/sysconfig/system	
-
-	* install_steps_interactive.pm (miscellaneous): forbidden
-	useSupermount if high security.	
-
-	* mouse.pm (detect): fix bug (ttyS instead of ttyS0)
-
-2000-02-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (createXconf): do not use "Generic VGA" for
-	svga and accel. SVGA also wants 16 bpp. added ugly modeline for
-	800x600.	
-
-	* partition_table_raw.pm (get_geometry): when the
-	HDIO_GET_IDENTITY fails, defaults to what GETGEO gave
-
-	* install2.pm (main): use modules::load_multi to increase boot
-	start time
-
-	* modules.pm (load_multi): added this function for loading many
-	modules at once.
-
-	* install_steps_gtk.pm (new): increase time before timeout
-
-	* detect_devices.pm (cdroms): change the device associated with
-	ide-burners (hdX -> scdX). Problem is how to know the X in scdX :(	
-
-	* modules.pm (write_conf): sort scsi_hostadapter's
-
-2000-02-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): load ide-probe and the like in 'prereq' type
-	so no aliases are added to conf.modules
-
-2000-02-25  Pixel  <pixel@mandrakesoft.com>
-
-	* devices.pm (make): small code cleanup
-
-	* partition_table_raw.pm (adjustEnd): more explicit error message
-
-	* fsedit.pm (allocatePartitions): fix a bug (size was getting too
-	big after each allocation) making adjustEnd cry
-
-2000-02-24  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (new): added the "new" method to initialize
-	windowheight for isStandalone
-
-	* install_steps_gtk.pm (new): returns undef in case no X server
-	works	
-
-	* install2.pm (main): moved the ejectCdrom from install_steps::END
-	to here
-	* install2.pm (main): fix the $SIG{SEGV} handler
-	* install2.pm (main): added a "try again" in text install if the
-	"new" fails
-
-	* install_steps_interactive.pm (createBootdisk): fix an error for
-	non fdX choice of floppy drive
-	
-	* install_steps_interactive.pm (setup_thiskind): remove the
-	"defined @l"
-
-2000-02-23  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (%suggestedPartitions): remove any /boot entries
-	* install2.pm (selectInstallClass): removed the special code to
-	/boot entries from suggestedPartitions for on non-intel (and it
-	was buggy :)
-	* fsedit.pm (@suggestions): remove the /boot entry
-	* fsedit.pm (check_mntpoint): remove the 1024 cylinder check	
-	* fsedit.pm (suggest_part): remove the 1024 cylinder special case
-
-	* install_steps_interactive.pm (setupLILO): replace linear option
-	by lba32
-
-	* lilo.pm (suggest): add lba32 by default
-
-	* install_steps_interactive.pm (load_thiskind): moved the HPT
-	stuff to install_any::ultra66 and call it.
-	Add sound card configuration (3 lines :)
-
-	* my_gtk.pm and interactive_gtk: resize the list and tree based on
-	root window size
-
-	* install_steps_gtk: $width and $height goes $::rootwidth and
-	$::rootheight, also other dimensions goes global (main::)
-
-	* commands.pm (strings): replace the typo \{$n,} by {$n,}
-
-2000-02-23  François Pons  <fpons@mandrakesoft.com>
-
-	* build_archive, extract_archive: changed format of TOC to speed
-	up extraction of archive, now 5 to 6 times faster to read TOC :-)
-	
-2000-02-22  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: load "Cards" database only to translate NAME
-	to fields. Added file CardsNames created from Cards using
-	share/Cards2CardsNames. Kind of list of normalized NAMEs	
-
-	* MonitorsDB: replace the ` ' separator for vendor by `|'
-
-	* install_steps_interactive.pm (timeConfig): use ask_from_treelist	
-
-	* interactive_gtk.pm (ask_from_treelist): creation of
-	ask_from_treelist. Usage is just the same as ask_from_list with
-	one more argument (the separator eg: |, /)
-
-2000-02-21  François Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm: fixed deadlock while trying to create partition
-	when available space is equal or less than 2 cylinders. fixed
-	Create action on corrupted partition by removing stalling window.
-	Blocked partition table writing if there are error by forcing user
-	to correct partition table.
-	* partition_table.pm: fixed typo in verifyParts with cdie, added
-	verifyParts on Resize action.
-	
-2000-02-21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (create_big_help): display the help in full
-	screen	
-
-	* my_gtk.pm (_create_window): add big help on F1
-
-	* common.pm (add2hash): now returns the first parameter
-
-	* mouse.pm (detect): really defaults to serial mouse
-
-	* interactive.pm: add ask_many_from_list_with_help and
-	ask_many_from_list_with_help_ref
-
-	* services.pm: creation, it handles what was in
-	standalone/drakxservices
-
-2000-02-18  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (createXconf): added /dev/ (X wants
-	"/dev/psaux" and not "psaux")
-
-	* diskdrake.pm (Create): show start sector even for non-expert on
-	non-i386
-
-2000-02-16  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm (detect): add defaults to serial mouse
-
-	* install_steps_gtk.pm (createXconf): remove the defaults to
-	serial mouse
-
-2000-02-15  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: "After %s partition %s," inlined otherwise does
-	not please pablo and translators...
-
-2000-02-14  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Create): hide start sector choice for non-expert
-
-2000-02-11  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_raw.pm (get_geometry): do not use the cylinder
-	number given by HDIO_GETGEO cuz limited to 16bits. Compute using
-	the total_sectors using HDIO_GET_IDENTITY
-
-	* c/stuff.xs.pm: added total_sectors (gives the number of sector
-	of a drive)
-
-	* modules.pm (load): ignore error in loading prereq's
-	
-	* modules.pm (@drivers_by_category): rcpci instead of rcpci45,
-	z85230 added
-
-	* commands.pm (mount): add modules::load_deps otherwise the
-	fs::mount won't succeed insmoding vfat if needed
-
-2000-02-11  François Pons  <fpons@mandrakesoft.com>
-
-	* fixed diskdrake to handle limit case when creating and resizing
-	partition table, address size limit and start sector limit.
-
-2000-02-11  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): add a callback on SEGV
-	-> message printed
-	-> that way, ENDs are called (otherwise skipped)
-
-	* install_steps_interactive.pm (setup_thiskind): handles the undef
-	value returned by load_thiskind
-	
-	* install_steps_interactive.pm (exitInstall): do not call
-	install_steps::exitInstall
-
-	* install_steps (exitInstall): removed
-	* install_steps (END): added (it does ejectCdrom)
-
-	* install_steps_interactive.pm (load_thiskind): returns undef if
-	error loading a module
-
-	* fs.pm (format_part): changed the prototype from $;$@ to $;@
-	otherwise, @options always have a value (mostly undef) and mkdosfs
-	fails (with "mkdosfs", "/dev/hdXX", undef, "-F", 32)
-
-	* install_steps_interactive.pm (setup_thiskind):
-	add a $auto_probe_pci that overrules $o->{auto_probe_pci}
-	(that way no pci probe the second time)
-
-2000-02-10  François Pons  <fpons@mandrakesoft.com>
-
-	* heavy modification of build_archive and extract_archive to manage
-	a TOC directly in archive file, handle bzip2 or gzip compression,
-	extract_archive can extract multiple files a time, with minimal
-	invocation of uncompress program and follow symlink and expand
-	directory contents.
-	* use build_archive/extract_archive for locales.
-	* fixed a min/max in install_steps_gtk for Resize/Create partition.
-	* fixed adjustEnd with dos partition table, take care of magic 63
-	sectors at beginning of partitions, a more solid method should be
-	used for that.
-
-2000-02-10  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (load_thiskind): skip modules "unknown" and "ignore"
-
-2000-02-09  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (add): cdie if maximum number of partitions
-	handled by linux is reached
-
-	* Xconfigurator.pm (chooseResolutionsGtk): display the graphic
-	card or server found
-
-	* install_any.pm (relGetFile): for mdkinst files, take care not to
-	have a double '/' (see debbugs #591)
-
-	* install_steps_interactive.pm (configureNetwork):
-	purpose: add ability to configure both modem and lan
-	         clean up the behaviour
-
-	* fs.pm (write_fstab): 
-	purpose: sort the fstab per mount point (cuz /usr must be before /usr/local)
-	also: rewrite of the part writing the fstab. 
diff --git a/perl-install/Makefile b/perl-install/Makefile
deleted file mode 100644
index 51acbc583..000000000
--- a/perl-install/Makefile
+++ /dev/null
@@ -1,175 +0,0 @@
-include Makefile.config
-
-POFILES = $(shell ls share/po/*.po)
-MOFILES = $(POFILES:%.po=%.mo)
-
-.PHONY: all $(DIRS) install clean stage2 full_stage2 verify_c 
-
-all: TAGS $(DIRS)
-
-TAGS: $(PMS)
-	etags -o - $^ /usr/lib/perl5/site_perl/*/MDK/Common/*.pm | ./perl2etags > $@
-
-clean:
-	for i in $(DIRS) share/po; do $(MAKE) -C $$i clean; done
-	rm -rf auto ../drakxtools.tar.bz2
-	find . -name "*~" -o -name ".#*" -o -name "TAGS" -o -name "*.old" | xargs rm -f
-
-check:
-	$(MAKE) -C share/po check
-
-tar-drakxtools: clean
-	rm -rf standalone/pixmaps
-	$(MAKE) -C ../tools clean
-	cd .. ; rm -rf drakxtools ; cp -af perl-install drakxtools ; cp -af tools/rpcinfo-flushed.c tools/ddcprobe tools/serial_probe drakxtools
-	cd ../drakxtools ; perl -pi -e 's/^C_RPM.*/C_RPM=0/; s/^C_DRAKX.*/C_DRAKX=0/' c/Makefile
-	cd ../drakxtools ; perl -pi -e 's/^all: help/all:/' share/po/Makefile
-	cd ../drakxtools ; rm -rf install* pkgs.pm help.pm ftp.pm t.pm */CVS ; mv Makefile.drakxtools Makefile ; mv -f standalone/* .
-	cd .. ; tar cfj drakxtools.tar.bz2 --exclude CVS $(patsubst %,drakxtools/%,Makefile Makefile.config Newt c ddcprobe serial_probe share/po sbus_probing resize_fat share/diskdrake.rc share/wizard.rc $(STANDALONEPMS) icons pixmaps network interactive_http rpcinfo-flushed.c *.pm)
-	cd .. ; rm -rf drakxtools
-
-$(DIRS):
-	install -d auto
-	$(MAKE) -C $@
-
-test_pms: verify_c
-	for i in install2 install_steps_*.pm standalone/keyboarddrake standalone/XFdrake standalone/drakboot; do perl_checker -I. -no_cw -excludec -excludehelp -excluderesize_fat::c_rewritten -excludeMDK::Common::Globals -excludeCGI $$i; done
-	for i in install2 install_steps_*.pm; do perl -cw -I. $$i; done
-
-verify_c:
-	./verify_c $(PMS)
-
-%.mo: %.po
-	msgfmt -o $@ $<
-
-install_pms: $(DIRS)
-	for i in `perl -ne 's/sub (\w+?)_? {.*/$$1/ and print' commands.pm` sync; do ln -sf commands $(DEST)/usr/bin/$$i; done
-
-	install -d $(DESTREP4PMS)
-	for i in $(PMS); do \
-		dest=$(DESTREP4PMS)/`dirname $$i`; \
-		install -d $$dest; \
-		perl -ne 'print' $$i > $(DESTREP4PMS)/$$i; \
-		perl -pe 's/#[-+].*//; $$_ = "\n" if (/^=head/ .. /^=cut/) || /use (diagnostics|vars|strict)/' $$i > $(DESTREP4PMS)/$$i; \
-	done
-#		perl -pe 's/#-.*//; $$_ = "\n" if (/^=head/ .. /^=cut/) || /use (diagnostics)/' $$i > $(DESTREP4PMS)/$$i; \
-
-	cp share/*.rc $(DESTREP4PMS)
-	chmod a+x $(DESTREP4PMS)/install2
-	chmod a+x $(DESTREP4PMS)/commands
-	chmod a+x $(DESTREP4PMS)/standalone/*
-	chmod a+x $(DESTREP4PMS)/g_auto_install
-	chmod a+x $(DESTREP4PMS)/live_install*
-
-get_needed_files: $(DIRS) $(MOFILES)
-	$(MAKE) -C share
-
-#	export PERL_INSTALL_TEST=1 ; strace -f -e trace=file -o '| grep -v "(No such file or directory)" | sed -e "s/[^\"]*\"//" -e "s/\".*//" | grep "^/" | grep -v -e "^/tmp" -e "^/home" -e "^/proc" -e "^/var" -e "^/dev" -e "^/etc" -e "^/usr/lib/rpm" > /tmp/list ' $(PERL) -d install2 < /dev/null
-	eval `perl -V:version`; \
-	cat share/list `../tools/specific_arch share/list` | \
-	perl -pe "s/ARCH/$(ARCH)/g" | perl -pe "s/PERL_VERSION/$$version/g" > /tmp/list
-
-	@missing=`perl -lne 'print if !-e $$_' /tmp/list`; [ -z "$$missing" ] || { echo "missing files vvvvvvvvvvvvvvvvvvvvvvvvvv" ; echo "$$missing" ; echo "missing files ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^" ; exit 1; }
-
-	find auto -follow -name "*.so" >> /tmp/list
-
-	for i in $(LOCALFILES) `cat /tmp/list` ; do \
-		ldd $$i 2>/dev/null | grep "=>" | sed -e 's/.*=> //' -e 's/ .*//' | uniq | sort >> /tmp/list; \
-	done
-
-	perl -Mlang -I. -e 'print "$$_\n" foreach lang::console_font_files()' >> /tmp/list
-
-	install -d $(DEST)/etc
-	install -d $(DEST)/etc/sysconfig/network-scripts
-	install -d $(DEST)/lib
-	install -d $(DEST)/bin
-	install -d $(DEST)/usr/bin
-	install -d $(DEST)/usr/lib
-	install -d $(DEST)/usr/share
-	install -d $(DEST)/usr/share/gtk
-	install -d $(DEST)/usr/share/xmodmap
-	install -d $(DEST)/usr/X11R6/lib/X11
-	install -d $(ROOTDEST)/Mandrake/base
-	install -s $(LOCALFILES) $(DEST)/usr/bin
-#	cp -f $(LOCALFILES2) $(DEST)/usr/bin
-	ln -s ../X11R6/lib/X11 $(DEST)/usr/lib/X11
-ifeq (sparc,$(ARCH))
-	cp -a /usr/X11R6/lib/X11/xkb $(DEST)/usr/X11R6/lib/X11
-	rm -f $(DEST)/usr/X11R6/lib/X11/xkb/compiled
-	ln -s /tmp $(DEST)/usr/X11R6/lib/X11/xkb/compiled
-	ln -s /usr/X11R6/lib/X11/xkb/xkbcomp $(DEST)/usr/bin/xkbcomp
-endif
-ifeq (i386,$(ARCH))
-	install -s ../all.kernels/*/cardmgr/cardmgr-* $(DEST)/usr/bin
-endif
-
-	for i in `cat /tmp/list`; do \
-	    if (echo $$i | grep -q "lib/[^/]*\.so"); then \
-	      install -s $$i $(DEST)/lib; \
-	    else \
-	      d=$$i; \
-	      (echo $$d | grep -q "^[^/]") && d="$(REP4PMS)/$$d"; \
-	      d=`echo $(DEST)/$$d | sed 's/\/usr\/local\//\/usr\//'`; \
-	      install -d `dirname $$d` && \
-	      if (echo $$i | grep -q "\.pm"); then \
-	    	 perl -pe '$$_ =~ /^__END__/ and exit(0);' $$i > $$d; \
-	      elif (echo $$i | grep -q "\.so"); then \
-	    	      install -s $$i $$d; \
-	      else \
-	    	      cp -f $$i $$d; \
-	      fi; \
-	    fi; \
-	done
-	mv -f $(DEST)/lib/libimlib-png.so $(DEST)/usr/lib
-
-#	# transform xpm's in png's
-	for i in $(DEST)/usr/share/icons/*.xpm; do convert $$i `echo $$i | sed 's/xpm/png/'`; rm $$i; done
-
-	mv -f $(DEST)/bin/* $(DEST)/sbin/* $(DEST)/usr/bin
-	cd $(DEST)/usr/bin ; mv insmod insmod_
-	rmdir $(DEST)/bin $(DEST)/sbin
-
-	perl -ane 'symlink "$$F[1]", "$(DEST)/usr/bin/$$F[0]"' share/aliases
-
-ifeq (i386,$(ARCH))
-	cp ../tools/i386/busybox $(DEST)/usr/bin
-endif
-	ln -sf ash $(DEST)/usr/bin/sh
-
-	for i in fonts keyboards locales keymaps; do tar xfj `../tools/specific_arch share/$$i.tar.bz2` -C $(DEST); done
-
-	grep ChangeLog CVS/Entries > $(DEST)/usr/share/VERSION
-
-	gzip -9f $(DEST)/usr/share/ldetect-lst/*
-
-	cd share ; cp -a modparm.lst $(DEST)/usr/share
-	cd share ; cp -a consolefonts $(DEST)/usr/share
-	cd share ; cp template.in/*.in $(DEST)/usr/share
-	-cd share ; cp -f *.png *.xpm $(DEST)/usr/share
-	-cd pixmaps ; cp -f *.png *.xpm $(DEST)/usr/share ; rm -f $(DEST)/usr/share/wiz_*
-	cd share ; cp -a themes $(DEST)/usr/share/gtk
-	cd share ; cp compssUsers compssUsers.desktop rpmsrate $(ROOTDEST)/Mandrake/base
-
-	for i in ../all.modules/modules.cz*; do cp -f $$i $(DEST)/lib/; done
-
-	$(MAKE) -C share/po install NAME=libDrakX LOCALEDIR=$(DEST)/usr/share/locale_special
-
-#	echo -e '#!/bin/sh\n\nexec "/usr/bin/sh"' > $(DEST)/usr/bin/runinstall2
-#	chmod a+x $(DEST)/usr/bin/runinstall2
-
-ifeq (i386,$(ARCH))
-	cp -a /etc/pcmcia $(DEST)/etc
-	patch --no-backup-if-mismatch -p0 -d $(DEST)/etc < ../tools/pcmcia_config.patch
-endif
-
-	find $(DEST) -name CVS | xargs rm -rf
-
-full_stage2:
-	if [ `id -u` = 0 ]; then rm -rf $(DEST); else $(SUDO) rm -rf $(DEST); fi
-	mkdir -p $(DEST)
-	$(MAKE) get_needed_files 
-	$(MAKE) stage2
-
-stage2:
-	$(MAKE) install_pms
-	$(ROOTDEST)/misc/make_mdkinst_stage2 $(DEST) $(ROOTDEST)/Mandrake/base/mdkinst_stage2
diff --git a/perl-install/Makefile.config b/perl-install/Makefile.config
deleted file mode 100644
index 5500d43ec..000000000
--- a/perl-install/Makefile.config
+++ /dev/null
@@ -1,21 +0,0 @@
-ARCH := $(patsubst i%86,i386,$(shell uname -m))
-ARCH := $(patsubst sparc%,sparc,$(ARCH))
-
-VERSION     = 2.2.10-BOOT                                                                             
-SUDO        = sudo
-SO_FILES    = c/blib/arch/auto/c/c.so                                                                 
-PMS         = *.pm Newt/*.pm c/stuff.pm resize_fat/*.pm sbus_probing/*.pm network/*.pm commands install2 g_auto_install live_install live_install2
-STANDALONEPMS= diskdrake XFdrake mousedrake printerdrake keyboarddrake draknet localedrake net_monitor drakbug_report tinyfirewall drakxconf drakxservices draksec drakboot adduserdrake drakgw drakautoinst livedrake lsnetdrake scannerdrake
-PMS	   += $(STANDALONEPMS:%=standalone/%)
-REP4PMS     = /usr/bin/perl-install
-ROOTDEST    = /export
-DEST        = $(ROOTDEST)/Mandrake/mdkinst
-STAGE2      = $(ROOTDEST)/Mandrake/base/mdkinst_stage2
-BASE        = $(ROOTDEST)/Mandrake/base
-DESTREP4PMS = $(DEST)$(REP4PMS)
-PERL        = perl
-LOCALFILES  = $(patsubst %, ../tools/%,ddcprobe/ddcxinfos aewm-drakx/aewm-drakx serial_probe/serial_probe xhost+)
-DIRS        = c Newt resize_fat #po 
-CFLAGS	    = -Wall
-override CFLAGS  += -pipe
-
diff --git a/perl-install/Makefile.drakxtools b/perl-install/Makefile.drakxtools
deleted file mode 100644
index 316ff9b37..000000000
--- a/perl-install/Makefile.drakxtools
+++ /dev/null
@@ -1,53 +0,0 @@
-include Makefile.config
-
-INLIBDEST_DIRS = Newt c resize_fat sbus_probing 
-HAVEINST_DIRS = share/po interactive_http
-DIRS = $(INLIBDEST_DIRS) $(HAVEINST_DIRS) ddcprobe serial_probe
-NAME = libDrakX
-PREFIX = 
-LIBDIR = $(PREFIX)/usr/lib
-DATADIR = $(PREFIX)/usr/share
-BINDEST = $(PREFIX)/usr/bin
-SBINDEST = $(PREFIX)/usr/sbin
-ETCDEST = $(PREFIX)/etc/gtk
-BINX11DEST = $(PREFIX)/usr/X11R6/bin
-LIBX11DEST = $(PREFIX)/usr/X11R6/lib/X11
-LIBDEST = $(LIBDIR)/$(NAME)
-NETLIBDEST = $(LIBDIR)/$(NAME)/network
-PIXDIR = $(DATADIR)/$(NAME)/pixmaps
-.PHONY: $(DIRS)
-
-all: rpcinfo-flushed $(DIRS)
-
-$(DIRS):
-	install -d auto
-	rm standalone ; ln -s . standalone
-	rm -f share/po/DrakX.pot # force rebuild of po's
-	[ ! -e $@/Makefile ] || $(MAKE) -C $@
-
-install:
-	install -d $(BINDEST) $(ETCDEST) $(SBINDEST) $(DATADIR) $(LIBDEST) $(NETLIBDEST) $(BINX11DEST) $(LIBX11DEST) $(PIXDIR) 
-	install -d $(INLIBDEST_DIRS:%=$(LIBDEST)/%)
-	install $(STANDALONEPMS) $(SBINDEST)
-	install -s rpcinfo-flushed ddcprobe/ddcxinfos serial_probe/serial_probe $(SBINDEST)
-	ln -s ../../$(patsubst $(PREFIX)/usr%,%,$(SBINDEST))/XFdrake $(BINX11DEST)/Xdrakres
-	mv -f $(SBINDEST)/lsnetdrake $(BINDEST)/lsnetdrake
-
-	install -m 644 *.pm $(LIBDEST)
-	install -m 644 network/*.pm $(NETLIBDEST)
-	install -m 644 pixmaps/* $(PIXDIR)
-	install -m 644 share/diskdrake.rc $(ETCDEST)
-	install -m 644 share/wizard.rc $(ETCDEST)
-
-	install -m 644 $(patsubst %,Newt/%.pm,Newt) $(LIBDEST)/Newt
-	install -m 644 $(patsubst %,c/%.pm,stuff) $(LIBDEST)/c
-	install -m 644 $(patsubst %,sbus_probing/%.pm,main) $(LIBDEST)/sbus_probing
-	install -m 644 $(patsubst %,resize_fat/%.pm,main any boot_sector c_rewritten dir_entry directory fat info_sector io) $(LIBDEST)/resize_fat
-
-	find $(LIBDEST) -name "*.pm" | xargs perl -pi -e '$$_ = "\n" if /\s*use\s+(diagnostics|vars|strict)/'
-
-	for i in $(HAVEINST_DIRS); do \
-		$(MAKE) -C $$i install PREFIX=$(PREFIX) DATADIR=$(DATADIR) NAME=$(NAME) ; \
- 	done
-
-	cp -rfL auto icons $(LIBDEST)
diff --git a/perl-install/Newt/.cvsignore b/perl-install/Newt/.cvsignore
deleted file mode 100644
index c296b7faf..000000000
--- a/perl-install/Newt/.cvsignore
+++ /dev/null
@@ -1,6 +0,0 @@
-Newt.bs
-Newt.c
-pm_to_blib
-blib
-Makefile
-Makefile_c
diff --git a/perl-install/Newt/Av_CharPtrPtr.c b/perl-install/Newt/Av_CharPtrPtr.c
deleted file mode 100644
index f28fa6315..000000000
--- a/perl-install/Newt/Av_CharPtrPtr.c
+++ /dev/null
@@ -1,99 +0,0 @@
-#ifdef __cplusplus
-extern "C" {
-#endif
-#include "EXTERN.h"
-#include "perl.h"
-#include "XSUB.h"
-#include "Av_CharPtrPtr.h"  /* XS_*_charPtrPtr() */
-#ifdef __cplusplus
-}
-#endif
-
-
-/* Used by the INPUT typemap for char**.
- * Will convert a Perl AV* (containing strings) to a C char**.
- */
-char **
-XS_unpack_charPtrPtr( rv )
-SV *rv;
-{
-	AV *av;
-	SV **ssv;
-	char **s;
-	int avlen;
-	int x;
-
-	if( SvROK( rv ) && (SvTYPE(SvRV(rv)) == SVt_PVAV) )
-		av = (AV*)SvRV(rv);
-	else {
-		warn("XS_unpack_charPtrPtr: rv was not an AV ref");
-		return( (char**)NULL );
-	}
-
-	/* is it empty? */
-	avlen = av_len(av);
-	if( avlen < 0 ){
-		warn("XS_unpack_charPtrPtr: array was empty");
-		return( (char**)NULL );
-	}
-
-	/* av_len+2 == number of strings, plus 1 for an end-of-array sentinel.
-	 */
-	s = (char **)safemalloc( sizeof(char*) * (avlen + 2) );
-	if( s == NULL ){
-		warn("XS_unpack_charPtrPtr: unable to malloc char**");
-		return( (char**)NULL );
-	}
-	for( x = 0; x <= avlen; ++x ){
-		ssv = av_fetch( av, x, 0 );
-		if( ssv != NULL ){
-			if( SvPOK( *ssv ) ){
-				s[x] = (char *)safemalloc( SvCUR(*ssv) + 1 );
-				if( s[x] == NULL )
-					warn("XS_unpack_charPtrPtr: unable to malloc char*");
-				else
-					strcpy( s[x], SvPV( *ssv, PL_na ) );
-			}
-			else
-				warn("XS_unpack_charPtrPtr: array elem %d was not a string.", x );
-		}
-		else
-			s[x] = (char*)NULL;
-	}
-	s[x] = (char*)NULL; /* sentinel */
-	return( s );
-}
-
-/* Used by the OUTPUT typemap for char**.
- * Will convert a C char** to a Perl AV*.
- */
-void
-XS_pack_charPtrPtr( st, s )
-SV *st;
-char **s;
-{
-	AV *av = newAV();
-	SV *sv;
-	char **c;
-
-	for( c = s; *c != NULL; ++c ){
-		sv = newSVpv( *c, 0 );
-		av_push( av, sv );
-	}
-	sv = newSVrv( st, NULL );	/* upgrade stack SV to an RV */
-	SvREFCNT_dec( sv );	/* discard */
-	SvRV( st ) = (SV*)av;	/* make stack RV point at our AV */
-}
-
-
-/* cleanup the temporary char** from XS_unpack_charPtrPtr */
-void
-XS_release_charPtrPtr(s)
-char **s;
-{
-	char **c;
-	for( c = s; *c != NULL; ++c )
-		safefree( *c );
-	safefree( s );
-}
-
diff --git a/perl-install/Newt/Av_CharPtrPtr.h b/perl-install/Newt/Av_CharPtrPtr.h
deleted file mode 100644
index 765f1a731..000000000
--- a/perl-install/Newt/Av_CharPtrPtr.h
+++ /dev/null
@@ -1,4 +0,0 @@
-char ** XS_unpack_charPtrPtr _(( SV *rv ));
-void XS_pack_charPtrPtr _(( SV *st, char **s ));
-void XS_release_charPtrPtr _(( char **s ));
-
diff --git a/perl-install/Newt/Makefile b/perl-install/Newt/Makefile
deleted file mode 100644
index cb80c5ab7..000000000
--- a/perl-install/Newt/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-.PHONY: clean
-
-Newt: %: %.xs
-	test -e Makefile_c || perl Makefile.PL
-	$(MAKE) -f Makefile_c LD_RUN_PATH=
-	rm -f ../auto/Newt ; ln -s ../Newt/blib/arch/auto/Newt ../auto
-
-clean:
-	test ! -e Makefile_c || $(MAKE) -f Makefile_c clean
-	rm -f *~ *.o
diff --git a/perl-install/Newt/Makefile.PL b/perl-install/Newt/Makefile.PL
deleted file mode 100644
index 6378a8f31..000000000
--- a/perl-install/Newt/Makefile.PL
+++ /dev/null
@@ -1,13 +0,0 @@
-use ExtUtils::MakeMaker;
-# See lib/ExtUtils/MakeMaker.pm for details of how to influence
-# the contents of the Makefile that is written.
-
-WriteMakefile(
-    'NAME'	=> 'Newt',
-    'OBJECT'    => 'Av_CharPtrPtr.o Newt.o',
-    'MAKEFILE'  => 'Makefile_c',
-    'OPTIMIZE'  => '-Os',
-    'VERSION_FROM' => 'Newt.pm', # finds $VERSION
-    'LIBS'	=> ['-lnewt -lslang'],
-    'DEFINE'	=> '',     # e.g., '-DHAVE_SOMETHING' 
-);
diff --git a/perl-install/Newt/Newt.pm b/perl-install/Newt/Newt.pm
deleted file mode 100644
index fdf9c0232..000000000
--- a/perl-install/Newt/Newt.pm
+++ /dev/null
@@ -1,16 +0,0 @@
-package Newt; # $Id$
-
-use strict;
-use vars qw($VERSION @ISA);
-use DynaLoader;
-
-use vars qw($VERSION @ISA);
-@ISA = qw(DynaLoader);
-$VERSION = '0.01';
-bootstrap Newt $VERSION;
-
-package Newt::Component; # $Id$
-package Newt::Grid; # $Id$
-
-
-1;
diff --git a/perl-install/Newt/Newt.xs b/perl-install/Newt/Newt.xs
deleted file mode 100644
index fba7c5455..000000000
--- a/perl-install/Newt/Newt.xs
+++ /dev/null
@@ -1,478 +0,0 @@
-#include "EXTERN.h"
-#include "perl.h"
-#include "XSUB.h"
-#include <newt.h>
-
-static void suspend() {
-  newtSuspend();
-  raise(SIGTSTP);
-  newtResume();
-}
-
-static void componentCallback(newtComponent co, void *data) {
-  dSP;
-  PUSHMARK(SP);
-  perl_call_sv((SV *) data, G_DISCARD);
-}
-
-
-typedef newtComponent Newt__Component;
-typedef newtGrid Newt__Grid;
-
-
-MODULE = Newt		PACKAGE = Newt 	PREFIX = newt
-
-void
-DESTROY()
-	CODE:
-	{
-		newtFinished();
-	}
-
-int
-newtInit()
-
-int
-newtFinished()
-
-void
-newtCls()
-
-void
-newtSuspend()
-
-void
-newtResume()
-
-int
-newtCenteredWindow(width,height,title)
-	int width;
-	int height;
-	const char * title;
-
-void
-newtPopWindow()
-
-void
-newtRefresh()
-
-void
-newtPushHelpLine(text)
-	const char * text;
-
-void
-newtDrawRootText(row,col,text)
-	int row;
-	int col;
-	const char * text;
-
-void
-newtGetScreenSize()
-  PPCODE:
-{
-  int cols, rows;
-  newtGetScreenSize(&cols, &rows);
-  PUSHs(sv_2mortal(newSViv(cols)));
-  PUSHs(sv_2mortal(newSViv(rows)));
-}
-
-void
-newtSetSuspendCallback()
-	CODE:
-	{
-	  newtSetSuspendCallback(suspend, NULL);
-	}
-
-
-void
-newtWinMessage(title,buttonText,text)
-	char * title;
-	char * buttonText;
-	char * text;
-
-int
-newtWinChoice(title,button1,button2,text)
-	char * title;
-	char * button1;
-	char * button2;
-	char * text;
-
-int
-newtWinTernary(title,button1,button2,button3,message)
-	char * title;
-	char * button1;
-	char * button2;
-	char * button3;
-	char * message;
-
-void
-newtWinMenu(title,text,suggestedWidth,flexDown,flexUp,maxListHeight,list,def,buttons, ...)
-	char * title;
-	char * text;
-	int suggestedWidth;
-	int flexDown;
-	int flexUp;
-	int maxListHeight;
-	char **list;
-	int def;
-	char *buttons;
-        PPCODE:
-	{
-	  int button;
-#define nb 8
-#define a(i) SvPV(ST(i + nb),PL_na)
-	  button = newtWinMenu(title, text, suggestedWidth, flexDown, flexUp, maxListHeight, list, &def,
-			       items > nb +  0 ? a( 0) : NULL,
-			       items > nb +  1 ? a( 1) : NULL,
-			       items > nb +  2 ? a( 2) : NULL,
-			       items > nb +  3 ? a( 3) : NULL,
-			       items > nb +  4 ? a( 4) : NULL,
-			       items > nb +  5 ? a( 5) : NULL,
-			       items > nb +  6 ? a( 6) : NULL,
-			       items > nb +  7 ? a( 7) : NULL,
-			       items > nb +  8 ? a( 8) : NULL,
-			       items > nb +  9 ? a( 9) : NULL,
-			       items > nb + 10 ? a(10) : NULL, 
-			       NULL);
-#undef a
-	  EXTEND(SP, 2);
- 	  PUSHs(sv_2mortal(newSViv(button)));
- 	  PUSHs(sv_2mortal(newSViv(def)));
-	}
-
-MODULE = Newt		PACKAGE = Newt::Component 	PREFIX = newt
-
-void
-addCallback(co, callback)
-  Newt::Component co;
-  SV *callback;
-  CODE:
-  newtComponentAddCallback(co, componentCallback, callback);
-
-Newt::Component
-newtCompactButton(left,top,text)
-	int left;
-	int top;
-	const char * text;
-
-Newt::Component
-newtButton(left,top,text)
-	int left;
-	int top;
-	const char * text;
-
-Newt::Component
-newtCheckbox(left,top,text,defValue,seq)
-	int left;
-	int top;
-	const char * text;
-	char *defValue;
-	const char * seq;
-  CODE: 
-  RETVAL = newtCheckbox(left, top, text, defValue[0], seq, NULL);
-  OUTPUT:
-  RETVAL
-
-int
-newtCheckboxGetValue(co)
-	Newt::Component co;
-
-void
-newtCheckboxSetValue(co, value)
-	Newt::Component co;
-	char *value;
-  CODE: 
-  newtCheckboxSetValue(co, value[0]);
-
-Newt::Component
-newtLabel(left,top,text)
-	int left;
-	int top;
-	const char * text;
-
-void
-newtLabelSetText(co,text)
-	Newt::Component co;
-	const char * text;
-
-Newt::Component
-newtVerticalScrollbar(left,top,height,normalColorset,thumbColorset)
-	int left;
-	int top;
-	int height;
-	int normalColorset;
-	int thumbColorset;
-
-void
-newtScrollbarSet(co,where,total)
-	Newt::Component co;
-	int where;
-	int total;
-
-Newt::Component
-newtListbox(left,top,height,flags)
-	int left;
-	int top;
-	int height;
-	int flags;
-
-SV *
-newtListboxGetCurrent(co)
-	Newt::Component co;
-CODE:
-        RETVAL = SvREFCNT_inc(newtListboxGetCurrent(co));
-OUTPUT:
-	RETVAL
-
-
-void
-newtListboxSetCurrent(co,indice)
-	Newt::Component co;
-	int indice;
-
-void
-newtListboxSetWidth(co,width)
-	Newt::Component co;
-	int width;
-
-int
-newtListboxAddEntry(co,text,data)
-	Newt::Component co;
-	const char * text;
-	SV * data;
-CODE:
-	RETVAL = newtListboxAddEntry(co, text, data);
-OUTPUT:
-	RETVAL
-
-Newt::Component
-newtTextboxReflowed(left,top,text,width,flexDown,flexUp,flags)
-	int left;
-	int top;
-	char * text;
-	int width;
-	int flexDown;
-	int flexUp;
-	int flags;
-
-Newt::Component
-newtTextbox(left,top,width,height,flags)
-	int left;
-	int top;
-	int width;
-	int height;
-	int flags;
-
-void
-newtTextboxSetText(co,text)
-	Newt::Component co;
-	const char * text;
-
-void
-newtTextboxSetHeight(co,height)
-	Newt::Component co;
-	int height;
-
-int
-newtTextboxGetNumLines(co)
-	Newt::Component co;
-
-char *
-newtReflowText(text,width,flexDown,flexUp,actualWidth,actualHeight)
-	char * text;
-	int width;
-	int flexDown;
-	int flexUp;
-	int * actualWidth;
-	int * actualHeight;
-
-Newt::Component
-newtForm(vertBar,help,flags)
-	Newt::Component vertBar;
-	const char * help;
-	int flags;
-
-void
-newtFormSetSize(co)
-	Newt::Component co;
-
-Newt::Component
-newtFormGetCurrent(co)
-	Newt::Component co;
-
-void
-newtFormSetBackground(co,color)
-	Newt::Component co;
-	int color;
-
-void
-newtFormSetCurrent(co,subco)
-	Newt::Component co;
-	Newt::Component subco;
-
-void
-newtFormAddComponent(form,co)
-	Newt::Component form;
-	Newt::Component co;
-
-void
-newtFormAddGrid(form,grid,recurse)
-	Newt::Component form;
-	Newt::Grid grid;
-        int recurse;
-  CODE:
-  newtGridAddComponentsToForm(grid,form,recurse);
-
-void
-newtFormSetHeight(co,height)
-	Newt::Component co;
-	int height;
-
-void
-newtFormSetWidth(co,width)
-	Newt::Component co;
-	int width;
-
-Newt::Component
-newtRunForm(form)
-	Newt::Component form;
-
-void
-newtDrawForm(form)
-	Newt::Component form;
-
-Newt::Component
-newtEntry(left,top,initialValue,width,flag)
-	int left;
-	int top;
-	const char * initialValue;
-	int width;
-        int flag;
-	CODE:
-	{
-		char *result;
-		RETVAL = newtEntry(left,top,initialValue,width,&result,flag);
-	}
-	OUTPUT:
-	RETVAL
-
-void
-newtEntrySet(co,value,cursorAtEnd)
-	Newt::Component co;
-	const char * value;
-	int cursorAtEnd;
-
-char *
-newtEntryGetValue(co)
-	Newt::Component co;
-
-void
-newtFormDestroy(form)
-	Newt::Component form;
-
-MODULE = Newt		PACKAGE = Newt::Grid 	PREFIX = newt
-
-Newt::Grid
-newtCreateGrid(cols,rows)
-	int cols;
-	int rows;
-
-Newt::Grid
-HCloseStacked(first, ...)
-	Newt::Component first;
-     CODE:
-	{
-	  int i;
-	  newtComponent *p = alloca(sizeof(newtComponent) * (2 * items + 1));
-	  for (i = 0; i < items; i++) {
-	    p[2 * i] = 1;
-	    p[2 * i + 1] = (newtComponent)SvIV((SV*)SvRV( ST(i) ));
-	  }
-	  p[2 * items] = NULL;
-          RETVAL = ((newtGrid (*)()) newtGridHCloseStacked)();
-	}
-OUTPUT:
-RETVAL
-
-
-Newt::Grid
-newtGridBasicWindow(text,middle,buttons)
-	Newt::Component text;
-	Newt::Grid middle;
-	Newt::Grid buttons;
-
-
-Newt::Grid
-newtGridSimpleWindow(text,middle,buttons)
-	Newt::Component text;
-	Newt::Component middle;
-	Newt::Grid buttons;
-
-void
-newtGridSetField(grid,col,row,type,val,padLeft,padTop,padRight,padBottom,anchor,flags)
-	Newt::Grid grid;
-	int col;
-	int row;
-	enum newtGridElement type;
-	void * val;
-	int padLeft;
-	int padTop;
-	int padRight;
-	int padBottom;
-	int anchor;
-	int flags;
-
-
-void
-newtGridFree(grid,recurse)
-	Newt::Grid grid;
-	int recurse;
-
-void
-newtGridPlace(grid,left,top)
-	Newt::Grid grid;
-        int left;
-        int top;
-
-void
-newtGridGetSize(grid)
-	Newt::Grid grid;
- PPCODE:
-{
-  int width;
-  int height;
-  newtGridGetSize(grid, &width, &height);
-  PUSHs(sv_2mortal(newSViv(width)));
-  PUSHs(sv_2mortal(newSViv(height)));
-}
-
-void
-newtGridWrappedWindow(grid,title)
-	Newt::Grid grid;
-	char * title;
-	
-Newt::Grid
-newtButtonBar(button1, ...)
-	char * button1;
- PPCODE:
-	{
-	  static newtComponent p[11];
-	  int i;
-	  EXTEND(SP, items + 1);
-#define a(i) (char *)SvPV(ST(i),PL_na)
-          PUSHs(sv_setref_pv(sv_newmortal(), "Newt::Grid", 
-	     newtButtonBar(items >  0 ? a( 0) : NULL, items >  0 ? &p[ 0] : NULL, 
-			   items >  1 ? a( 1) : NULL, items >  1 ? &p[ 1] : NULL, 
-			   items >  2 ? a( 2) : NULL, items >  2 ? &p[ 2] : NULL, 
-			   items >  3 ? a( 3) : NULL, items >  3 ? &p[ 3] : NULL, 
-			   items >  4 ? a( 4) : NULL, items >  4 ? &p[ 4] : NULL, 
-			   items >  5 ? a( 5) : NULL, items >  5 ? &p[ 5] : NULL, 
-			   items >  6 ? a( 6) : NULL, items >  6 ? &p[ 6] : NULL, 
-			   items >  7 ? a( 7) : NULL, items >  7 ? &p[ 7] : NULL, 
-			   items >  8 ? a( 8) : NULL, items >  8 ? &p[ 8] : NULL, 
-			   items >  9 ? a( 9) : NULL, items >  9 ? &p[ 9] : NULL, 
-			   items > 10 ? a(10) : NULL, items > 10 ? &p[10] : NULL,  
-			   NULL)));
-#undef a
-        for (i = 0; i < items; i++) PUSHs(sv_setref_pv(sv_newmortal(), "Newt::Component", p[i]));
-	}
diff --git a/perl-install/Newt/typemap b/perl-install/Newt/typemap
deleted file mode 100644
index 5aaa2f668..000000000
--- a/perl-install/Newt/typemap
+++ /dev/null
@@ -1,25 +0,0 @@
-TYPEMAP
-
-const char *		T_PV
-const void *		T_PV
-int *			T_PV
-void **			T_PACKED
-
-enum newtFlagsSense	T_IV
-enum newtGridElement	T_IV
-SV **			T_SV
-
-Newt::Component		NewtComponent
-Newt::Grid		NewtGrid
-
-INPUT
-NewtComponent
-	$var = ($type) SvIV((SV*)SvRV($arg))
-NewtGrid
-	$var = ($type) SvIV((SV*)SvRV($arg))
-
-OUTPUT
-NewtComponent
-	sv_setref_pv($arg, "Newt::Component", (void*) $var);
-NewtGrid
-	sv_setref_pv($arg, "Newt::Grid", (void*) $var);
diff --git a/perl-install/Xconfig.pm b/perl-install/Xconfig.pm
deleted file mode 100644
index cb23f05af..000000000
--- a/perl-install/Xconfig.pm
+++ /dev/null
@@ -1,216 +0,0 @@
-package Xconfig; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use mouse;
-use devices;
-use Xconfigurator;
-
-# otherwise uses the rule substr($keymap, 0, 2)
-my %keymap_translate = (
-    cf => "ca_enhanced",
-    uk => "gb",
-);
-
-
-sub keymap_translate {
-    $keymap_translate{$_[0]} || substr($_[0], 0, 2);
-}
-
-
-sub getinfo {
-    my $o = shift || {};
-    getinfoFromDDC($o);
-    getinfoFromSysconfig($o);
-
-    my ($mouse) = mouse::detect();
-    add2hash($o->{mouse}, $mouse) unless $o->{mouse}{XMOUSETYPE};
-    add2hash($o->{mouse}{auxmouse}, $mouse->{auxmouse}) unless $o->{mouse}{auxmouse}{XMOUSETYPE};
-    $o->{mouse}{auxmouse}{XMOUSETYPE} or delete $o->{mouse}{auxmouse};
-
-    $o->{mouse}{device} ||= "mouse" if -e "/dev/mouse";
-    $o;
-}
-
-sub getinfoFromXF86Config {
-    my $o = shift || {}; #- original $::o->{X} which must be changed only if sure!
-    my $prefix = shift || "";
-    my (%keyboard, %mouse, %wacom, %card, %monitor);
-    my (%c, $depth, $driver);
-
-    local $_;
-    local *G; open G, "$prefix/etc/X11/XF86Config-4";
-    while (<G>) {
-	if (my $i = /^Section "InputDevice"/ .. /^EndSection/) {
-	    %c = () if $i == 1;
-
-	    $c{driver} = $1 if /^\s*Driver\s+"(.*?)"/;
-	    $c{id} = $1 if /^\s*Identifier\s+"[^\d"]*(\d*)"/;
-	    $c{xkb_model} ||= $1 if /^\s*Option\s+"XkbModel"\s+"(.*?)"/;
-	    $c{xkb_keymap} ||= $1 if /^\s*Option\s+"XkbLayout"\s+"(.*?)"/;
-	    $c{XMOUSETYPE} ||= $1 if /^\s*Option\s+"Protocol"\s+"(.*?)"/;
-	    $c{device} ||= $1 if /^\s*Option\s+"Device"\s+"\/dev\/(.*?)"/;
-	    $c{chordmiddle} ||= $1 if /^\s*Option\s+"ChordMiddle"\s+"\/dev\/(.*?)"/;
-	    $c{nbuttons}   = 2 if /^\s*Option\s+"Emulate3Buttons"\s+/;
-	    $c{nbuttons} ||= 5 if /^\s*#\s*Option\s+"ZAxisMapping"\s.*5/;
-	    $c{nbuttons}   = 7 if /^\s*#\s*Option\s+"ZAxisMapping"\s.*7/;
-
-	    if ($i =~ /E0/) {
-		@keyboard{qw(xkb_keymap)} = @c{qw(xkb_keymap)}
-		  if $c{driver} =~ /keyboard/i;
-		@{$mouse{auxmouse}}{qw(XMOUSETYPE device chordmiddle nbuttons)} = @c{qw(XMOUSETYPE device chordmiddle nbuttons)}
-		  if $c{driver} =~ /mouse/i && $c{id} > 1;
-		@mouse{qw(XMOUSETYPE device chordmiddle nbuttons)} = @c{qw(XMOUSETYPE device chordmiddle nbuttons)}
-		  if $c{driver} =~ /mouse/i && $c{id} < 1;
-		$wacom{$c{device}} = undef
-		  if $c{driver} =~ /wacom/i;
-	    }
-	} elsif (/^Section "Monitor"/ .. /^EndSection/) {
-	    $monitor{type} ||= $1 if /^\s*Identifier\s+"(.*?)"/;
-	    $monitor{hsyncrange} ||= $1 if /^\s*HorizSync\s+(.*)/;
-	    $monitor{vsyncrange} ||= $1 if /^\s*VertRefresh\s+(.*)/;
-	    $monitor{vendor} ||= $1 if /^\s*VendorName\s+"(.*?)"/;
-	    $monitor{model} ||= $1 if /^\s*ModelName\s+"(.*?)"/;
-	    $monitor{modelines_}{"$1_$2"} = $_ if /^\s*Mode[lL]ine\s+(\S+)\s+(\S+)\s+/;
-	} elsif (my $s = /^Section "Screen"/ .. /^EndSection/) {
-	    $card{default_depth} ||= $1 if /^\s*DefaultColorDepth\s+(\d+)/;
-	    if (my $i = /^\s*Subsection\s+"Display"/ .. /^\s*EndSubsection/) {
-		undef $depth if $i == 1;
-		$depth = $1 if /^\s*Depth\s+(\d*)/;
-		if (/^\s*Modes\s+(.*)/) {
-		    my $a = 0;
-		    unshift @{$card{depth}{$depth || 8} ||= []}, #- insert at the beginning for resolution_wanted!
-		      grep { $_->[0] >= 640 } map { [ /"(\d+)x(\d+)"/ ] } split ' ', $1;
-		}
-	    }
-	}
-    }
-    close G;
-    local *F; open F, "$prefix/etc/X11/XF86Config";
-    while (<F>) {
-	if (/^Section "Keyboard"/ .. /^EndSection/) {
-	    $keyboard{xkb_model} ||= $1 if /^\s*XkbModel\s+"(.*?)"/;
-	    $keyboard{xkb_keymap} ||= $1 if /^\s*XkbLayout\s+"(.*?)"/;
-	} elsif (/^Section "Pointer"/ .. /^EndSection/) {
-	    $mouse{XMOUSETYPE} ||= $1 if /^\s*Protocol\s+"(.*?)"/;
-	    $mouse{device} ||= $1 if m|^\s*Device\s+"/dev/(.*?)"|;
-	    $mouse{cleardtrrts} ||= 1 if m/^\s*ClearDTR\s+/;
-	    $mouse{cleardtrrts} ||= 1 if m/^\s*ClearRTS\s+/;
-	    $mouse{chordmiddle} ||= 1 if m/^\s*ChordMiddle\s+/;
-	    $mouse{nbuttons}   = 2 if m/^\s*Emulate3Buttons\s+/;
-	    $mouse{nbuttons} ||= 5 if m/^\s*ZAxisMapping\s.*5/;
-	    $mouse{nbuttons}   = 7 if m/^\s*ZAxisMapping\s.*7/;
-	} elsif (/^Section "XInput"/ .. /^EndSection/) {
-	    if (/^\s*SubSection "Wacom/ .. /^\s*EndSubSection/) {
-		$wacom{$1} = undef if /^\s*Port\s+"\/dev\/(.*?)"/;
-	    }
-	} elsif (/^Section "Monitor"/ .. /^EndSection/) {
-	    $monitor{type} ||= $1 if /^\s*Identifier\s+"(.*?)"/;
-	    $monitor{hsyncrange} ||= $1 if /^\s*HorizSync\s+(.*)/;
-	    $monitor{vsyncrange} ||= $1 if /^\s*VertRefresh\s+(.*)/;
-	    $monitor{vendor} ||= $1 if /^\s*VendorName\s+"(.*?)"/;
-	    $monitor{model} ||= $1 if /^\s*ModelName\s+"(.*?)"/;
-	    $monitor{modelines_}{"$1_$2"} = $_ if /^\s*Mode[lL]ine\s+(\S+)\s+(\S+)\s+/;
-	} elsif (my $i = /^Section "Device"/ .. /^EndSection/) {
-	    %c = () if $i == 1;
-
-	    $c{type} ||= $1 if /^\s*Identifier\s+"(.*?)"/;
-	    $c{memory} ||= $1 if /VideoRam\s+(\d+)/;
-	    $c{flags}{needVideoRam} ||= 1 if /^\s*VideoRam\s+/;
-	    $c{vendor} ||= $1 if /^\s*VendorName\s+"(.*?)"/;
-	    $c{board} ||= $1 if /^\s*BoardName\s+"(.*?)"/;
-	    $c{driver} ||= $1 if /^\s*Driver\s+"(.*?)"/;
-	    $c{options_xf3}{$1} ||= 1 if /^\s*Option\s+"(.*?)"/;
-	    $c{options_xf3}{$1} ||= 0 if /^\s*#\s*Option\s+"(.*?)"/;
-
-	    add2hash(\%card, \%c) if ($i =~ /E0/ && $c{type} && $c{type} ne "Generic VGA");
-	} elsif (my $s = /^Section "Screen"/ .. /^EndSection/) {
-	    undef $driver if $s == 1;
-	    $driver = $1 if /^\s*Driver\s+"(.*?)"/;
-	    if ($driver eq $Xconfigurator::serversdriver{$card{server}}) {
-		$card{default_depth} ||= $1 if /^\s*DefaultColorDepth\s+(\d+)/;
-		if (my $i = /^\s*Subsection\s+"Display"/ .. /^\s*EndSubsection/) {
-		    undef $depth if $i == 1;
-		    $depth = $1 if /^\s*Depth\s+(\d*)/;
-		    if (/^\s*Modes\s+(.*)/) {
-			my $a = 0;
-			unshift @{$card{depth}{$depth || 8} ||= []}, #- insert at the beginning for resolution_wanted!
-		            grep { $_->[0] >= 640 } map { [ /"(\d+)x(\d+)"/ ] } split ' ', $1;
-		    }
-		}
-	    }
-	}
-    }
-    close F;
-
-    #- clean up modeline by those automatically given by $modelines_text.
-    foreach (split /\n/, $Xconfigurator::modelines_text) {
-	delete $monitor{modelines_}{"$1_$2"} if /^\s*Mode[lL]ine\s+(\S+)\s+(\S+)\s+(.*)/;
-    }
-    $monitor{modelines} .= $_ foreach values %{$monitor{modelines_}}; delete $monitor{modelines_};
-
-    #- get the default resolution according the the current file.
-    #- suggestion to take into account, but that have to be checked.
-    $o->{card}{suggest_depth} = $card{default_depth};
-    if (my @depth = keys %{$card{depth}}) {
-	$o->{card}{suggest_wres} = ($card{depth}{$o->{card}{suggest_depth} || $depth[0]}[0][0]);
-    }
-
-    #- final clean-up.
-    $mouse{nbuttons} ||= 3; #- when no tag found, this is because there is 3 buttons.
-    $mouse{auxmouse}{nbuttons} ||= 3;
-    mouse::update_type_name(\%mouse); #- allow getting fullname (type|name).
-    mouse::update_type_name($mouse{auxmouse});
-    delete $mouse{auxmouse} unless $mouse{auxmouse}{XMOUSETYPE}; #- only take care of a true mouse.
-
-    #- try to merge with $o, the previous has been obtained by ddcxinfos.
-    add2hash($o->{keyboard} ||= {}, \%keyboard);
-    add2hash($o->{mouse} ||= {}, \%mouse);
-    @{$o->{wacom} || []} > 0 or $o->{wacom} = [ keys %wacom ];
-    add2hash($o->{monitor} ||= {}, \%monitor);
-
-    $o;
-}
-
-sub getinfoFromSysconfig {
-    my $o = shift || {};
-    my $prefix = shift || "";
-
-    add2hash($o->{mouse} ||= {}, { getVarsFromSh("$prefix/etc/sysconfig/mouse") });
-
-    if (my %keyboard = getVarsFromSh "$prefix/etc/sysconfig/keyboard") {
-	$o->{keyboard}{xkb_keymap} ||= keymap_translate($keyboard{KEYTABLE}) if $keyboard{KEYTABLE};
-    }
-    $o;
-}
-
-sub getinfoFromDDC {
-    my $o = shift || {};
-    my $O = $o->{monitor} ||= {};
-    #- return $o if $O->{hsyncrange} && $O->{vsyncrange} && $O->{modelines};
-    my ($m, @l) = `ddcxinfos`;
-    $? == 0 or return $o;
-
-    $o->{card}{memory} ||= to_int($m);
-    local $_;
-    while (($_ = shift @l) ne "\n") {
-	my ($depth, $x, $y) = split;
-	$depth = int(log($depth) / log(2));
-	if ($depth >= 8 && $x >= 640) {
-	    push @{$o->{card}{depth}{$depth}}, [ $x, $y ] unless scalar grep { $_->[0] == $x && $_->[1] == $y } @{$o->{card}{depth}{$depth}};
-	    push @{$o->{card}{depth}{32}}, [ $x, $y ] if $depth == 24 && ! scalar grep { $_->[0] == $x && $_->[1] == $y } @{$o->{card}{depth}{32}};
-	}
-    }
-    my ($h, $v, $size, @m) = @l;
-
-    $O->{hsyncrange} ||= first($h =~ /^(\S*)/);
-    $O->{vsyncrange} ||= first($v =~ /^(\S*)/);
-    $O->{size} ||= to_float($size);
-    $O->{EISA_ID} = lc($1) if $size =~ /EISA ID=(\S*)/;
-    $O->{modelines} ||= join '', @m;
-    $o;
-}
-
-1;
diff --git a/perl-install/Xconfigurator.pm b/perl-install/Xconfigurator.pm
deleted file mode 100644
index 77b24fbfa..000000000
--- a/perl-install/Xconfigurator.pm
+++ /dev/null
@@ -1,1568 +0,0 @@
-package Xconfigurator; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($in $do_pkgs @window_managers @depths @monitorSize2resolution @hsyncranges %min_hsync4wres @vsyncranges %depths @resolutions %serversdriver @svgaservers @accelservers @allbutfbservers @allservers %vgamodes %videomemory @ramdac_name @ramdac_id @clockchip_name @clockchip_id %keymap_translate %standard_monitors $XF86firstchunk_text $keyboardsection_start $keyboardsection_start_v4 $keyboardsection_part2 $keyboardsection_part3 $keyboardsection_part3_v4 $keyboardsection_end $pointersection_text $monitorsection_text1 $monitorsection_text2 $monitorsection_text3 $monitorsection_text4 $modelines_text_Trident_TG_96xx $modelines_text_ext $modelines_text $devicesection_text $devicesection_text_v4 $screensection_text1 %lines @options %xkb_options $good_default_monitor $low_default_monitor $layoutsection_v4 $modelines_text_apple);
-
-use common;
-use log;
-use detect_devices;
-use run_program;
-use Xconfigurator_consts;
-use any;
-use modules;
-use my_gtk qw(:helpers :wrappers);
-
-my $tmpconfig = "/tmp/Xconfig";
-
-my ($prefix, %monitors, %standard_monitors_);
-
-
-sub xtest {
-    my ($display) = @_;
-    $::isStandalone ? 
-      system("DISPLAY=$display /usr/X11R6/bin/xtest") == 0 : 
-      c::Xtest($display);    
-}
-
-sub getVGAMode($) { $_[0]->{card}{vga_mode} || $vgamodes{"640x480x16"}; }
-
-sub readCardsDB {
-    my ($file) = @_;
-    my ($card, %cards);
-
-    my $F = common::openFileMaybeCompressed($file);
-
-    my ($lineno, $cmd, $val) = 0;
-    my $fs = {
-        LINE => sub { push @{$card->{lines}}, $val unless $val eq "VideoRam" },
-	NAME => sub {
-	    $cards{$card->{type}} = $card if $card;
-	    $card = { type => $val };
-	},
-	SEE => sub {
-	    my $c = $cards{$val} or die "Error in database, invalid reference $val at line $lineno";
-
-	    push @{$card->{lines}}, @{$c->{lines} || []};
-	    add2hash($card->{flags}, $c->{flags});
-	    add2hash($card, $c);
-	},
-	CHIPSET => sub {
-	    $card->{chipset} = $val;
-	    $card->{flags}{needChipset} = 1 if $val eq 'GeForce DDR';
-	    $card->{flags}{needVideoRam} = 1 if member($val, qw(mgag10 mgag200 RIVA128 SiS6326));
-	},
-	SERVER => sub { $card->{server} = $val; },
-	DRIVER => sub { $card->{driver} = $val; },
-	RAMDAC => sub { $card->{ramdac} = $val; },
-	DACSPEED => sub { $card->{dacspeed} = $val; },
-	CLOCKCHIP => sub { $card->{clockchip} = $val; $card->{flags}{noclockprobe} = 1; },
-	NOCLOCKPROBE => sub { $card->{flags}{noclockprobe} = 1 },
-	UNSUPPORTED => sub { $card->{flags}{unsupported} = 1 },
-	COMMENT => sub {},
-    };
-
-    local $_;
-    while (<$F>) { $lineno++;
-	s/\s+$//;
-	/^#/ and next;
-	/^$/ and next;
-	/^END/ and do { $cards{$card->{type}} = $card if $card; last };
-
-	($cmd, $val) = /(\S+)\s*(.*)/ or next; #log::l("bad line $lineno ($_)"), next;
-
-	my $f = $fs->{$cmd};
-
-	$f ? $f->() : log::l("unknown line $lineno ($_)");
-    }
-    \%cards;
-}
-sub readCardsNames {
-    my $file = "$ENV{SHARE_PATH}/ldetect-lst/CardsNames";
-    map { (split '=>')[0] } grep { !/^#/ } catMaybeCompressed($file);
-}
-sub cardName2RealName {
-    my ($name) = @_;
-    my $file = "$ENV{SHARE_PATH}/ldetect-lst/CardsNames";
-    foreach (catMaybeCompressed($file)) {
-	chop;
-	next if /^#/;	  
-	my ($name_, $real) = split '=>';
-	return $real if $name eq $name_;
-    }
-    $name;
-}
-sub updateCardAccordingName {
-    my ($card, $name) = @_;
-    my $cards = readCardsDB("$ENV{SHARE_PATH}/ldetect-lst/Cards+");
-
-    add2hash($card->{flags}, $cards->{$name}{flags});
-    add2hash($card, $cards->{$name});
-    $card;
-}
-
-sub readMonitorsDB {
-    my ($file) = @_;
-
-    %monitors and return;
-
-    my $F = common::openFileMaybeCompressed($file);
-    local $_;
-    my $lineno = 0; while (<$F>) {
-	$lineno++;
-	s/\s+$//;
-	/^#/ and next;
-	/^$/ and next;
-
-	my @fields = qw(vendor type eisa hsyncrange vsyncrange dpms);
-	my @l = split /\s*;\s*/;
-
-	my %l; @l{@fields} = @l;
-	if ($monitors{$l{type}}) {
-	    my $i; for ($i = 0; $monitors{"$l{type} ($i)"}; $i++) {}
-	    $l{type} = "$l{type} ($i)";
-	}
-	$monitors{"$l{vendor}|$l{type}"} = \%l;
-    }
-    while (my ($k, $v) = each %standard_monitors) {
-	$monitors{'Generic|' . translate($k)} = $standard_monitors_{$k} = 
-	  { hsyncrange => $v->[1], vsyncrange => $v->[2] };
-    }
-}
-
-sub keepOnlyLegalModes {
-    my ($card, $monitor) = @_;
-    my $mem = 1024 * ($card->{memory} || ($card->{server} eq 'FBDev' ? 2048 : 32768)); #- limit to 2048x1536x64
-    my $hsync = max(split(/[,-]/, $monitor->{hsyncrange}));
-
-    while (my ($depth, $res) = each %{$card->{depth}}) {
-	@$res = grep {
-	    $mem >= product(@$_, $depth / 8) &&
-	    $hsync >= ($min_hsync4wres{$_->[0]} || 0) &&
-	    ($card->{server} ne 'FBDev' || $vgamodes{"$_->[0]x$_->[1]x$depth"})
-	} @$res;
-	delete $card->{depth}{$depth} if @$res == 0;
-    }
-}
-
-sub cardConfigurationAuto() {
-    my @cards;
-    if (my @c = grep { $_->{driver} =~ /(Card|Server):/ } detect_devices::probeall()) {
-	foreach my $i (0..$#c) {
-	    local $_ = $c[$i]->{driver};
-	    my $card = { identifier => ($c[$i]{description} . (@c > 1 && " $i")) };
-	    $card->{type} = $1 if /Card:(.*)/;
-	    $card->{server} = $1 if /Server:(.*)/;
-	    $card->{flags}{needVideoRam} = /86c368|S3 Inc|Tseng.*ET6\d00/;
-	    $card->{busid} = "PCI:$c[$i]{pci_bus}:$c[$i]{pci_device}:$c[$i]{pci_function}";
-	    push @{$card->{lines}}, @{$lines{$card->{identifier}} || []};
-	    push @cards, $card;
-	}
-    }
-    #- take a default on sparc if nothing has been found.
-    if (arch() =~ /^sparc/ && !@cards) {
-        log::l("Using probe with /proc/fb as nothing has been found!");
-	local $_ = cat_("/proc/fb");
-	if (/Mach64/) { push @cards, { server => "Mach64" } }
-	elsif (/Permedia2/) { push @cards, { server => "3DLabs" } }
-	else { push @cards, { server => "Sun24" } }
-    }
-    #- special case for dual head card using only one busid.
-    @cards = map { my $dup = $_->{identifier} =~ /MGA G[45]50/ ? 2 : 1;
-		   if ($dup > 1) {
-		       my @result;
-		       my $orig = $_;
-		       foreach (1..$dup) {
-			   my $card = {};
-			   add2hash($card, $orig);
-			   push @result, $card;
-		       }
-		       @result;
-		   } else {
-		       ($_);
-		   }
-	       } @cards;
-    #- make sure no type are already used, duplicate both screen
-    #- and rename type (because used as id).
-    if (@cards > 1) {
-	my $card = 1;
-	foreach (@cards) {
-	    updateCardAccordingName($_, $_->{type}) if $_->{type};
-	    $_->{type} = "$_->{type} $card";
-	    $card++;
-	}
-    }
-    #- in case of only one cards, remove all busid reference, this will avoid
-    #- need of change of it if the card is moved.
-    #- on many PPC machines, card is on-board, busid is important, leave?
-    @cards == 1 and delete $cards[0]{busid} if arch() !~ /ppc/;
-    @cards;
-}
-
-sub cardConfiguration(;$$$) {
-    my ($card, $noauto, $cardOptions) = @_;
-    $card ||= {};
-
-    updateCardAccordingName($card, $card->{type}) if $card->{type}; #- try to get info from given type
-    undef $card->{type} unless $card->{server} || $card->{driver}; #- bad type as we can't find the server
-    my @cards = cardConfigurationAuto();
-    if (@cards > 1 && ($noauto || !$card->{server})) {#} && !$::isEmbedded) {
-	my (%single_heads, @choices, $tc);
-	my $configure_multi_head = sub {
-	    add2hash($card, $cards[0]); #- assume good default.
-	    delete $card->{cards} if $noauto;
-	    $card->{cards} or $card->{cards} = \@cards;
-	    $card->{force_xf4} = 1; #- force XF4 in such case.
-	    $card->{Xinerama} = $_[0];
-	};
-	foreach (@cards) {
-	    unless ($_->{driver} && !$_->{flags}{unsupported}) {
-		log::l("found card \"$_->{identifier}\" not supported by XF4, disabling mutli-head support");
-		$configure_multi_head = undef;
-	    }
-	    #- if more than one card use the same BusID, we have to use screen.
-	    if ($single_heads{$_->{busid}}) {
-		$single_heads{$_->{busid}}{screen} ||= 0;
-		$_->{screen} = $single_heads{$_->{busid}}{screen} + 1;
-	    }
-	    $single_heads{$_->{busid}} = $_;
-	}
-	if ($configure_multi_head) {
-	    push @choices, { text => _("Configure all heads independently"), code => sub { $configure_multi_head->('') } };
-	    push @choices, { text => _("Use Xinerama extension"), code => sub { $configure_multi_head->(1) } };
-	}
-	foreach my $e (values %single_heads) {
-	    push @choices, { text => _("Configure only card \"%s\" (%s)", $e->{identifier}, $e->{busid}),
-			     code => sub { add2hash($card, $e); foreach (qw(cards screen Xinerama)) { delete $card->{$_} } } };
-	}
-	$tc = $in->ask_from_listf(_("Multi-head configuration"),
-_("Your system support multiple head configuration.
-What do you want to do?"), sub { translate($_[0]{text}) }, \@choices) or return; #- no more die, CHECK with auto that return ''!
-	$tc->{code} and $tc->{code}();
-    } else {
-	#- only one head found, configure it as before.
-	add2hash($card, $cards[0]) unless $noauto;
-	delete $card->{cards}; delete $card->{Xinerama};
-    }
-    $card->{server} = 'FBDev' unless !$cardOptions->{allowFB} || $card->{server} || $card->{driver} || $card->{type} || $noauto;
-    $card->{type} = cardName2RealName($in->ask_from_treelist(_("Graphic card"), _("Select a graphic card"), '|', ['Other|Unlisted', readCardsNames()])) or return unless $card->{type} || $card->{server} || $card->{driver};
-    undef $card->{type}, $card->{server} = $in->ask_from_list(_("X server"), _("Choose a X server"), $cardOptions->{allowFB} ? \@allservers : \@allbutfbservers ) or return if $card->{type} eq 'Other|Unlisted';
-
-    updateCardAccordingName($card, $card->{type}) if $card->{type};
-    add2hash($card, { vendor => "Unknown", board => "Unknown" });
-
-    foreach ($card, @{$card->{cards} || []}) {
-	$_->{memory} = 4096,  delete $_->{depth} if $_->{driver} eq 'i810';
-	$_->{memory} = 16384, delete $_->{depth} if $_->{chipset} =~ /PERMEDIA/ && $_->{memory} <= 1024;
-    }
-    #- 3D acceleration configuration for XFree 3.3 using Utah-GLX.
-    $card->{Utah_glx} = ($card->{identifier} =~ /Matrox.* G[24]00/ || #- 8bpp does not work.
-			 $card->{identifier} =~ /Rage X[CL]/ ||
-			 $card->{identifier} =~ /3D Rage (?:LT|Pro)/);
-                         #- NOT WORKING $card->{type} =~ /Intel 810/);
-    $card->{Utah_glx} = '' if arch() =~ /ppc/; #- No 3D XFree 3.3 for PPC
-    #- 3D acceleration configuration for XFree 3.3 using Utah-GLX but EXPERIMENTAL that may freeze the machine (FOR INFO NOT USED).
-    $card->{Utah_glx_EXPERIMENTAL} = ($card->{identifier} =~ /[nN]Vidia.*T[nN]T2?/ || #- all RIVA/GeForce comes from NVIDIA ...
-				      $card->{identifier} =~ /[nN]Vidia.*NV[56]/ ||   #- and may freeze (gltron).
-				      $card->{identifier} =~ /[nN]Vidia.*Vanta/ ||
-				      $card->{identifier} =~ /[nN]Vidia.*GeForce/ ||
-				      $card->{identifier} =~ /[nN]Vidia.*NV1[15]/ ||
-				      $card->{identifier} =~ /[nN]Vidia.*Quadro/ ||
-				      $card->{identifier} =~ /Riva.*128/ || # moved here as not working correctly enough
-				      $card->{identifier} =~ /S3.*Savage.*3D/ || #- only this one is evoluting.
-				      $card->{identifier} =~ /Rage Mobility [PL]/ ||
-				      $card->{identifier} =~ /SiS.*6C?326/ || #- prefer 16bit, other ?
-				      $card->{identifier} =~ /SiS.*6C?236/ ||
-				      $card->{identifier} =~ /SiS.*630/);
-    #- 3D acceleration configuration for XFree 4 using DRI.
-    $card->{DRI_glx} = ($card->{identifier} =~ /Voodoo [35]|Voodoo Banshee/ || #- 16bit only
-			$card->{identifier} =~ /Matrox.* G[245][05]0/ || #- prefer 16bit with AGP only
-			$card->{identifier} =~ /8281[05].* CGC/ || #- 16bits (Intel 810 & 815).
-			$card->{identifier} =~ /Radeon / || #- 16bits preferable ?
-			$card->{identifier} =~ /Rage 128|Rage Mobility M/); #- 16 and 32 bits, prefer 16bit as no DMA.
-    #- 3D acceleration configuration for XFree 4 using DRI but EXPERIMENTAL that may freeze the machine (FOR INFO NOT USED).
-    $card->{DRI_glx_EXPERIMENTAL} = ($card->{identifier} =~ /SiS.*6C?326/ || #- prefer 16bit, other ?
-				     $card->{identifier} =~ /SiS.*6C?236/ ||
-				     $card->{identifier} =~ /SiS.*630/);
-    #- 3D acceleration configuration for XFree 4 using NVIDIA driver (TNT, TN2 and GeForce cards only).
-    $card->{NVIDIA_glx} = $cardOptions->{allowNVIDIA_rpms} && ($card->{identifier} =~ /[nN]Vidia.*T[nN]T2/ || #- TNT2 cards
-							       $card->{identifier} =~ /[nN]Vidia.*NV[56]/ ||
-							       $card->{identifier} =~ /[nN]Vidia.*Vanta/ ||
-							       $card->{identifier} =~ /[nN]Vidia.*GeForce/ || #- GeForce cards
-							       $card->{identifier} =~ /[nN]Vidia.*NV1[15]/ ||
-							       $card->{identifier} =~ /[nN]Vidia.*Quadro/);
-    #- check to use XFree 4 or XFree 3.3.
-    $card->{use_xf4} = $card->{driver} && !$card->{flags}{unsupported};
-    $card->{force_xf4} ||= arch() =~ /ppc|ia64/; #- try to figure out ugly hack for PPC (recommend XF4 always so...)
-    $card->{prefer_xf3} = !$card->{force_xf4} && ($card->{type} =~ /NeoMagic /);
-    #- take into account current environment in standalone to keep
-    #- the XFree86 version.
-    if ($::isStandalone) {
-	readlink("$prefix/etc/X11/X") =~ /XFree86/ and $card->{prefer_xf3} = 0;
-	readlink("$prefix/etc/X11/X") =~ /XF86_/ and $card->{prefer_xf3} = !$card->{force_xf4};
-    }
-
-    #- basic installation, use of XFree 4.1 or XFree 3.3.
-    my ($xf4_ver, $xf3_ver) = ("4.1.0", "3.3.6");
-    my $xf3_tc = { text => _("XFree %s", $xf3_ver),
-		   code => sub { $card->{Utah_glx} = $card->{DRI_glx} = $card->{NVIDIA_glx} = ''; $card->{use_xf4} = '';
-				 log::l("Using XFree $xf3_ver") } };
-    my $msg = _("Which configuration of XFree do you want to have?");
-    my @choices = $card->{use_xf4} ? (if_($card->{prefer_xf3}, $xf3_tc),
-				      if_(!$card->{prefer_xf3} || $::expert || $noauto, 
-					  { text => _("XFree %s", $xf4_ver),
-					    code => sub { $card->{Utah_glx} = $card->{DRI_glx} = $card->{NVIDIA_glx} = '';
-							  log::l("Using XFree $xf4_ver") } }),
-				      if_(!$card->{prefer_xf3} && !$card->{force_xf4} && ($::expert || $noauto), $xf3_tc)) : $xf3_tc;
-    #- try to figure if 3D acceleration is supported
-    #- by XFree 3.3 but not XFree 4 then ask user to keep XFree 3.3 ?
-    if ($card->{Utah_glx} && !$card->{force_xf4}) {
-	$msg = ($card->{use_xf4} && !($card->{DRI_glx} || $card->{NVIDIA_glx}) && !$card->{prefer_xf3} ?
-_("Your card can have 3D hardware acceleration support but only with XFree %s.
-Your card is supported by XFree %s which may have a better support in 2D.", $xf3_ver, $xf4_ver) :
-_("Your card can have 3D hardware acceleration support with XFree %s.", $xf3_ver)) . "\n\n\n" . $msg;
-	$::expert || $noauto or @choices = (); #- keep it by default here as it is the only choice available.
-	unshift @choices, { text => _("XFree %s with 3D hardware acceleration", $xf3_ver),
-			    code => sub { $card->{use_xf4} = '';
-					  log::l("Using XFree $xf3_ver with 3D hardware acceleration") } };
-    }
-
-    #- an expert user may want to try to use an EXPERIMENTAL 3D acceleration.
-    if ($::expert && $card->{use_xf4} && $card->{DRI_glx_EXPERIMENTAL} && !$card->{Xinerama}) {
-	$msg =
-_("Your card can have 3D hardware acceleration support with XFree %s,
-NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.", $xf4_ver) . "\n\n\n" . $msg;
-	push @choices, { text => _("XFree %s with EXPERIMENTAL 3D hardware acceleration", $xf4_ver),
-			 code => sub { $card->{DRI_glx} = 'EXPERIMENTAL';
-				       log::l("Using XFree $xf4_ver with EXPERIMENTAL 3D hardware acceleration") } };
-    }
-
-    #- an expert user may want to try to use an EXPERIMENTAL 3D acceleration, currenlty
-    #- this is with Utah GLX and so, it can provide a way of testing.
-    if ($::expert && $card->{Utah_glx_EXPERIMENTAL} && !$card->{force_xf4}) {
-	$msg = ($card->{use_xf4} && !($card->{DRI_glx} || $card->{NVIDIA_glx}) && !$card->{prefer_xf3} ?
-_("Your card can have 3D hardware acceleration support but only with XFree %s,
-NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.
-Your card is supported by XFree %s which may have a better support in 2D.", $xf3_ver, $xf4_ver) :
-_("Your card can have 3D hardware acceleration support with XFree %s,
-NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.", $xf3_ver)) . "\n\n\n" . $msg;
-	push @choices, { text => _("XFree %s with EXPERIMENTAL 3D hardware acceleration", $xf3_ver),
-			 code => sub { $card->{use_xf4} = ''; $card->{Utah_glx} = 'EXPERIMENTAL';
-				       log::l("Using XFree $xf3_ver with EXPERIMENTAL 3D hardware acceleration") } };
-    }
-
-    #- ask the expert or any user on second pass user to enable or not hardware acceleration support.
-    if ($card->{use_xf4} && ($card->{DRI_glx} || $card->{NVIDIA_glx}) && !$card->{Xinerama}) {
-	$msg = _("Your card can have 3D hardware acceleration support with XFree %s.", $xf4_ver) . "\n\n\n" . $msg;
-	$::expert || $noauto or @choices = (); #- keep all user by default with XFree 4 including 3D acceleration.
-	unshift @choices, { text => _("XFree %s with 3D hardware acceleration", $xf4_ver),
-			    code => sub { log::l("Using XFree $xf4_ver with 3D hardware acceleration") } };
-    }
-    if (arch() =~ /ppc/) {
-	#- not much choice for PPC - we only have XF4, and Xpmac from the installer   
-	@choices = { text => _("XFree %s", $xf4_ver), code => sub { $card->{xpmac} = ''; log::l("Using XFree $xf4_ver") } };
-	push @choices, { text => _("Xpmac (installation display driver)"), code => sub { $card->{xpmac} = 1 }} if ($ENV{DISPLAY});
-    }
-    #- examine choice of user, beware the list MUST NOT BE REORDERED AS the first item should be the
-    #- proposed one by DrakX.
-    my $tc = $in->ask_from_listf(_("XFree configuration"), formatAlaTeX($msg), sub { translate($_[0]{text}) }, \@choices) or return;
-    #- in case of class discarding, this can help ...
-    $tc or $tc = $choices[0];
-    $tc->{code} and $tc->{code}();
-    
-    if ($card->{xpmac} eq "1") {
-	log::l("Use Xpmac - great...");
-	#- define this stuff just so XF86Config isn't empty - we don't need it for Xpmac
-	$card->{type} = "Xpmac Frame Buffer Driver";
-	$card->{vendor} = $card->{board} = "None";
-	$card->{driver} = $card->{server} = "Xpmac";
-    }
-    	
-    $card->{prog} = "/usr/X11R6/bin/" . ($card->{use_xf4} ? 'XFree86' : $card->{server} =~ /Sun(.*)/ ?
-					 "Xsun$1" : "XF86_$card->{server}");
-
-    #- additional packages to install according available card.
-    #- add XFree86-libs-DRI here if using DRI (future split of XFree86 TODO)
-    my @l = ();
-    if ($card->{DRI_glx}) {
-	push @l, 'Glide_V5' if $card->{identifier} =~ /Voodoo 5/;
-	push @l, 'Glide_V3-DRI' if $card->{identifier} =~ /Voodoo (3|Banshee)/;
-	push @l, 'XFree86-glide-module' if $card->{identifier} =~ /Voodoo/;
-    } elsif ($card->{NVIDIA_glx}) {
-	push @l, @{$cardOptions->{allowNVIDIA_rpms}};
-    }
-    if ($card->{Utah_glx}) {
-	push @l, 'Mesa' if !$card->{use_xf4};
-    }
-    if ($card->{xpmac} eq "1") {
-	push @l, 'XFree86-Xpmac';
-	$card->{use_xf4} = '';
-	$card->{prog} = "/usr/X11R6/bin/Xpmac";
-	$card->{server} = 'Xpmac';
-    }
-
-    unless ($::g_auto_install) {
-	-x "$prefix$card->{prog}" or $do_pkgs->install($card->{use_xf4} ? 'XFree86-server' : "XFree86-$card->{server}", @l);
-	-x "$prefix$card->{prog}" or die "server $card->{server} is not available (should be in $prefix$card->{prog})";
-    }
-
-    #- check for Matrox G200 PCI cards, disable AGP in such cases, causes black screen else.
-    if ($card->{identifier} =~ /Matrox.* G[24]00/ && $card->{identifier} !~ /AGP/) {
-	log::l("disabling AGP mode for Matrox card, as it seems to be a PCI card");
-	log::l("this is only used for XFree 3.3.6, see /etc/X11/glx.conf");
-	substInFile { s/^\s*#*\s*mga_dma\s*=\s*\d+\s*$/mga_dma = 0\n/ } "$prefix/etc/X11/glx.conf";
-    }
-    #- make sure everything is correct at this point, packages have really been installed
-    #- and driver and GLX extension is present.
-    if ($card->{NVIDIA_glx} && !$card->{DRI_glx} && (-e "$prefix/usr/X11R6/lib/modules/drivers/nvidia_drv.o" &&
-						     -e "$prefix/usr/X11R6/lib/modules/extensions/libglx.so")) {
-	log::l("Using specific NVIDIA driver and GLX extensions");
-	$card->{driver} = 'nvidia';
-	foreach (@{$cardOptions->{allowNVIDIA_rpms}}) { #- hack as NVIDIA_kernel package does not do it actually (8.1 OEM).
-	    if (/NVIDIA_kernel-([^\-]*)-([^\-]*)(?:-(.*))?/ && -e "$prefix/boot/System.map-$1-$2$3") {
-		run_program::rooted($prefix, "/sbin/depmod", "-a", "-F", "/boot/System.map-$1-$2$3", "$1-$2$3");
-	    }
-	}
-    } else {
-	$card->{NVIDIA_glx} = '';
-    }
-
-    delete $card->{depth}{32} if $card->{type} =~ /S3 Trio3D|SiS/;
-    $card->{options}{sw_cursor} = 1 if $card->{type} =~ /S3 Trio3D|SiS 6326/;
-    unless ($card->{type}) {
-	$card->{flags}{noclockprobe} = member($card->{server}, qw(I128 S3 S3V Mach64));
-    }
-    $card->{options_xf3}{power_saver} = 1;
-    $card->{options_xf4}{DPMS} = 'on';
-
-    $card->{flags}{needVideoRam} and
-      $card->{memory} ||= $videomemory{$in->ask_from_list_('', _("Select the memory size of your graphic card"),
-							   [ sort { $videomemory{$a} <=> $videomemory{$b} }
-							     keys %videomemory]) || return};
-
-    #- hack for ATI Mach64 cards where two options should be used if using Utah-GLX.
-    if ($card->{identifier} =~ /Rage X[CL]/ ||
-	$card->{identifier} =~ /Rage Mobility [PL]/ ||
-	$card->{identifier} =~ /3D Rage (?:LT|Pro)/) {
-	$card->{options_xf3}{no_font_cache} = $card->{Utah_glx};
-	$card->{options_xf3}{no_pixmap_cache} = $card->{Utah_glx};
-    }
-    #- hack for SiS cards where an option should be used if using Utah-GLX.
-    if ($card->{identifier} =~ /SiS.*6C?326/ ||
-	$card->{identifier} =~ /SiS.*6C?236/ ||
-	$card->{identifier} =~ /SiS.*630/) {
-	$card->{options_xf3}{no_pixmap_cache} = $card->{Utah_glx};
-    }
-
-    #- 3D acceleration configuration for XFree 4 using DRI, this is enabled by default
-    #- but for some there is a need to specify VideoRam (else it won't run).
-    if ($card->{DRI_glx}) {
-	$card->{identifier} =~ /Matrox.* G[245][05]0/ and $card->{flags}{needVideoRam} = 'fakeVideoRam';
-	$card->{identifier} =~ /8281[05].* CGC/ and ($card->{flags}{needVideoRam}, $card->{memory}) = ('fakeVideoRam', 16384);
-	#- always enable (as a reminder for people using a better AGP mode to change it at their own risk).
-	$card->{options_xf4}{AGPMode} = '1';
-	#- hack for ATI Rage 128 card using a bttv or peripheral with PCI bus mastering exchange
-	#- AND using DRI at the same time.
-	if ($card->{identifier} =~ /Rage 128|Rage Mobility M/) {
-	    $card->{options_xf4}{UseCCEFor2D} = (detect_devices::matching_desc('Bt8[47][89]') ||
-						 detect_devices::matching_desc('TV') ||
-						 detect_devices::matching_desc('AG GMV1')) ? 'true' : 'false';
-	}
-    }
-
-    if (!$::isStandalone && $card->{driver} eq 'i810') {
-	require modules;
-	eval { modules::load("agpgart"); };
-    }
-    $card;
-}
-
-sub optionsConfiguration($) {
-    my ($o) = @_;
-    my @l;
-    my %l;
-
-    foreach (@options) {
-	if ($o->{card}{server} eq $_->[1] && $o->{card}{identifier} =~ /$_->[2]/) {
-	    my $options = 'options_' . ($o->{card}{server} eq 'XFree86' ? 'xf4' : 'xf3');
-	    $o->{card}{$options}{$_->[0]} ||= 0;
-	    unless ($l{$_->[0]}) {
-		push @l, { label => $_->[0], val => \$o->{card}{$options}{$_->[0]}, type => 'bool' };
-		$l{$_->[0]} = 1;
-	    }
-	}
-    }
-    @l = @l[0..9] if @l > 9; #- reduce list size to 10 for display
-
-    $in->ask_from('', _("Choose options for server"), \@l);
-}
-
-sub monitorConfiguration(;$$) {
-    my $monitor = shift || {};
-    my $useFB = shift || 0;
-
-    readMonitorsDB("$ENV{SHARE_PATH}/ldetect-lst/MonitorsDB");
-
-    if ($monitor->{EISA_ID}) {
-	log::l("EISA_ID: $monitor->{EISA_ID}");
-	if (my ($mon) = grep { lc($_->{eisa}) eq $monitor->{EISA_ID} } values %monitors) {
-	    add2hash($monitor, $mon);
-	    log::l("EISA_ID corresponds to: $monitor->{type}");
-	}
-    }
-    if ($monitor->{hsyncrange} && $monitor->{vsyncrange}) {
-	add2hash($monitor, { type => "monitor1", vendor => "Unknown", model => "Unknown" });
-	return $monitor;
-    }
-
-    my $good_default = (arch() =~ /ppc/ ? 'Apple|' : 'Generic|') . translate($good_default_monitor);
-    $monitor->{type} ||=
-      ($::auto_install ? $low_default_monitor :
-       $in->ask_from_treelist(_("Monitor"), _("Choose a monitor"), '|', ['Custom', keys %monitors], $good_default));
-    if ($monitor->{type} eq 'Custom') {
-	$in->ask_from('',
-_("The two critical parameters are the vertical refresh rate, which is the rate
-at which the whole screen is refreshed, and most importantly the horizontal
-sync rate, which is the rate at which scanlines are displayed.
-
-It is VERY IMPORTANT that you do not specify a monitor type with a sync range
-that is beyond the capabilities of your monitor: you may damage your monitor.
- If in doubt, choose a conservative setting."),
-				  [ { val => \$monitor->{hsyncrange}, list => \@hsyncranges, label => _("Horizontal refresh rate") },
-				    { val => \$monitor->{vsyncrange}, list => \@vsyncranges, label => _("Vertical refresh rate") }]);
-    } else {
-	add2hash($monitor, $monitors{$monitor->{type}} || $standard_monitors_{$monitor->{type}});
-    }
-    add2hash($monitor, { type => "Unknown", vendor => "Unknown", model => "Unknown", manual => 1 });
-}
-
-sub testConfig($) {
-    my ($o) = @_;
-    my ($resolutions, $clocklines);
-
-    write_XF86Config($o, $tmpconfig);
-
-    unlink "/tmp/.X9-lock";
-    #- restart_xfs;
-
-    my $f = $tmpconfig . ($o->{card}{use_xf4} && "-4");
-    local *F; open F, "$prefix$o->{card}{prog} :9 -probeonly -pn -xf86config $f 2>&1 |";
-    local $_;
-    while (<F>) {
-	$o->{card}{memory} ||= $2 if /(videoram|Video RAM):\s*(\d*)/;
-
-	# look for clocks
-	push @$clocklines, $1 if /clocks: (.*)/ && !/(pixel |num)clocks:/;
-
-	push @$resolutions, [ $1, $2 ] if /: Mode "(\d+)x(\d+)": mode clock/;
-	print;
-    }
-    close F or die "X probeonly failed";
-
-    ($resolutions, $clocklines);
-}
-
-sub testFinalConfig {
-    my ($o, $auto, $skiptest, $skip_badcard) = @_;
-
-    $o->{monitor}{hsyncrange} && $o->{monitor}{vsyncrange} or
-      $in->ask_warn('', _("Monitor not configured")), return;
-
-    $o->{card}{server} || $o->{card}{driver} or
-      $in->ask_warn('', _("Graphic card not configured yet")), return;
-
-    $o->{card}{depth} or
-      $in->ask_warn('', _("Resolutions not chosen yet")), return;
-
-    my $f = "/etc/X11/XF86Config.test";
-    write_XF86Config($o, $::testing ? $tmpconfig : "$prefix/$f");
-
-    $skiptest || $o->{card}{server} =~ 'FBDev|Sun' and return 1; #- avoid testing with these.
-
-    #- needed for bad cards not restoring cleanly framebuffer, according to which version of XFree are used.
-    my $bad_card = ($o->{card}{use_xf4} ?
-		    $o->{card}{identifier} =~ /Matrox|SiS.*SG86C2.5|SiS.*559[78]|SiS.*300|SiS.*540|SiS.*6C?326|SiS.*6C?236|Tseng.*ET6\d00|Riva.*128/ :
-		    $o->{card}{identifier} =~ /i740|Rage Mobility [PL]|3D Rage LT|Rage 128/);
-    $::live and $bad_card ||= $o->{card}{identifier} =~ /S3.*ViRGE/;
-    log::l("the graphic card does not like X in framebuffer") if $bad_card;
-
-    my $verybad_card = $o->{card}{driver} eq 'i810';
-    $verybad_card ||= $o->{card}{driver} eq 'nvidia' && !$::isStandalone; #- avoid testing during install at any price.
-    $bad_card || $verybad_card and return 1; #- deactivating bad_card test too.
-
-    my $mesg = _("Do you want to test the configuration?");
-    my $def = 1;
-    if ($bad_card && !$::isStandalone) {
-	$skip_badcard and return 1;
-	$mesg = $mesg . "\n" . _("Warning: testing this graphic card may freeze your computer");
-	$def = 0;
-    }
-    $auto && $def or $in->ask_yesorno(_("Test of the configuration"), $mesg, $def) or return 1;
-
-    unlink "$prefix/tmp/.X9-lock";
-
-    #- create a link from the non-prefixed /tmp/.X11-unix/X9 to the prefixed one
-    #- that way, you can talk to :9 without doing a chroot
-    #- but take care of non X11 install :-)
-    if (-d "/tmp/.X11-unix") {
-	symlinkf "$prefix/tmp/.X11-unix/X9", "/tmp/.X11-unix/X9" if $prefix;
-    } else {
-	symlinkf "$prefix/tmp/.X11-unix", "/tmp/.X11-unix" if $prefix;
-    }
-    #- restart_xfs;
-
-    my $f_err = "$prefix/tmp/Xoutput";
-    my $pid;
-    unless ($pid = fork) {
-	open STDERR, ">$f_err";
-	chroot $prefix if $prefix;
-	exec $o->{card}{prog}, 
-	  if_($o->{card}{prog} !~ /Xsun/, "-xf86config", ($::testing ? $tmpconfig : $f) . ($o->{card}{use_xf4} && "-4")),
-	  ":9" or c::_exit(0);
-    }
-
-    do { sleep 1 } until xtest(":9") || waitpid($pid, c::WNOHANG());
-
-    my $b = before_leaving { unlink $f_err };
-
-    unless (xtest(":9")) {
-	local $_;
-	local *F; open F, $f_err;
-      i: while (<F>) {
-	    if ($o->{card}{use_xf4}) {
-		if (/^\(EE\)/ && $_ !~ /Disabling/ || /^Fatal\b/) {
-		    my @msg = !/error/ && $_ ;
-		    while (<F>) {
-			/reporting a problem/ and last;
-			push @msg, $_;
-			$in->ask_warn('', [ _("An error has occurred:"), " ", @msg, _("\ntry to change some parameters") ]);
-			return 0;
-		    }
-		}
-	    } else {
-		if (/\b(error|not supported)\b/i) {
-		    my @msg = !/error/ && $_ ;
-		    while (<F>) {
-			/not fatal/ and last i;
-			/^$/ and last;
-			push @msg, $_;
-		    }
-		    $in->ask_warn('', [ _("An error has occurred:"), " ", @msg, _("\ntry to change some parameters") ]);
-		    return 0;
-		}
-	    }
-	}
-    }
-
-    $::noShadow = 1;
-    local *F;
-    open F, "|perl 2>/dev/null" or die '';
-    print F "use lib qw(", join(' ', @INC), ");\n";
-    print F q{
-	use interactive_gtk;
-        use my_gtk qw(:wrappers);
-
-	$ENV{DISPLAY} = ":9";
-
-        gtkset_background(200 * 257, 210 * 257, 210 * 257);
-        my ($h, $w) = Gtk::Gdk::Window->new_foreign(Gtk::Gdk->ROOT_WINDOW)->get_size;
-        $my_gtk::force_position = [ $w / 3, $h / 2.4 ];
-	$my_gtk::force_focus = 1;
-        my $text = Gtk::Label->new;
-        my $time = 8;
-        Gtk->timeout_add(1000, sub {
-	    $text->set(_("Leaving in %d seconds", $time));
-	    $time-- or Gtk->main_quit;
-            1;
-	});
-
-        my $background = "/usr/share/pixmaps/backgrounds/linux-mandrake/XFdrake-image-test.jpg";
-        my $qiv = "/usr/bin/qiv";
-        -r "} . $prefix . q{/$background" && -x "} . $prefix . q{/$qiv" and
-            system(($::testing ? "} . $prefix . q{" : "chroot } . $prefix . q{/ ") . "$qiv -y $background");
-
-        my $in = interactive_gtk->new;
-	$in->exit($in->ask_yesorno('', [ _("Is this the correct setting?"), $text ], 0) ? 0 : 222);
-    };
-    my $rc = close F;
-    my $err = $?;
-
-    unlink "/tmp/.X11-unix/X9" if $prefix;
-    kill 2, $pid;
-    $::noShadow = 0;
-
-    $rc || $err == 222 << 8 or $in->ask_warn('', _("An error has occurred, try to change some parameters"));
-    $rc;
-}
-
-sub allowedDepth($) {
-    my ($card) = @_;
-    my %allowed_depth;
-
-    if ($card->{Utah_glx} || $card->{DRI_glx}) {
-	$allowed_depth{16} = 1; #- this is the default.
-	$card->{identifier} =~ /Voodoo 5/ and $allowed_depth{24} = undef;
-	$card->{identifier} =~ /Matrox.* G[245][05]0/ and $allowed_depth{24} = undef;
-	$card->{identifier} =~ /Rage 128/ and $allowed_depth{24} = undef;
-	$card->{identifier} =~ /Radeon/ and $allowed_depth{24} = undef;
-    }
-    
-    for ($card->{server}) {
-	#- this should work by default, FBDev is allowed only if install currently uses it at 16bpp.
-	/FBDev/   and $allowed_depth{16} = 1;
-
-	#- Sun servers, Sun24 handles 24,8,2; Sun only 8 and 2; and SunMono only 2.
-	/^Sun24$/   and @allowed_depth{qw(24 8 2)} = (1);
-	/^Sun$/     and @allowed_depth{qw(8 2)} = (1);
-	/^SunMono$/ and @allowed_depth{qw(2)} = (1);
-    }
-
-    return %allowed_depth && \%allowed_depth; #- no restriction if false is returned.
-}
-
-sub autoDefaultDepth($$) {
-    my ($card, $wres_wanted) = @_;
-    my ($best, $depth);
-
-    #- check for forced depth according to current environment.
-    my $allowed_depth = allowedDepth($card);
-    if ($allowed_depth) {
-	foreach (keys %$allowed_depth) {
-	    $allowed_depth->{$_} and return $_; #- a default depth is given.
-	}
-    }
-
-    while (my ($d, $r) = each %{$card->{depth}}) {
-	$allowed_depth && ! exists $allowed_depth->{$d} and next; #- reject depth.
-	$depth = max($depth || 0, $d);
-
-	#- try to have resolution_wanted
-	$best = max($best || 0, $d) if $r->[0][0] >= $wres_wanted;
-	$best = $card->{suggest_depth}, last if ($card->{suggest_depth} &&
-						 $card->{suggest_wres} && $r->[0][0] >= $card->{suggest_wres});
-    }
-    $best || $depth or die "no valid modes";
-}
-
-sub autoDefaultResolution {
-    #    return "1024x768" if detect_devices::hasPCMCIA;
-
-    if (arch() =~ /ppc/) {
-	return "1024x768" if detect_devices::get_mac_model =~ /^PowerBook|^iMac/;
-    }
-	
-    my ($size) = @_;
-    $monitorSize2resolution[round($size || 14)] || #- assume a small monitor (size is in inch)
-    $monitorSize2resolution[-1]; #- no corresponding resolution for this size. It means a big monitor, take biggest we have
-}
-
-sub chooseResolutionsGtk($$;$) {
-    my ($card, $chosen_depth, $chosen_w) = @_;
-
-    require my_gtk;
-    my_gtk->import(qw(:wrappers));
-
-    my $W = my_gtk->new(_("Resolution"));
-    my %txt2depth = reverse %depths;
-    my ($r, $depth_combo, %w2depth, %w2h, %w2widget, $pix_monitor, $pix_colors, $w2_combo);
-    $w2_combo = new Gtk::Combo;
-    my $best_w;
-    my $allowed_depth = allowedDepth($card);
-    my %allowed_depth;
-    while (my ($depth, $res) = each %{$card->{depth}}) {
-	$allowed_depth && ! exists $allowed_depth->{$depth} and next; #- reject depth.
-	foreach (@$res) {
-	    ++$allowed_depth{$depth};
-	    $w2h{$_->[0]} = $_->[1];
-	    push @{$w2depth{$_->[0]}}, $depth;
-
-	    $best_w = max($_->[0], $best_w) if $_->[0] <= $chosen_w;
-	}
-    }
-    $chosen_w = $best_w;
-
-    my $set_depth = sub { $depth_combo->entry->set_text(translate($depths{$chosen_depth})) };
-
-    #- the set function is usefull to toggle the CheckButton with the callback being ignored
-    my $ignore;
-    my $no_human; # is the w2_combo->entry changed by a human?
-    my $set = sub { $ignore = 1; $_[0]->set_active(1); $ignore = 0; };
-
-    my %monitor;
-    $monitor{$_} = [ gtkcreate_png("monitor-" . $_ . ".png") ] foreach (640, 800, 1024, 1280);
-    $monitor{1152} = [ gtkcreate_png("monitor-" . 1024 . ".png") ];
-    $monitor{1600} = [ gtkcreate_png("monitor-" . 1280 . ".png") ];
-
-    my $pixmap_m = new Gtk::Pixmap( $monitor{$chosen_w}[0]  , $monitor{$chosen_w}[1] );
-
-    while (my ($w, $h) = each %w2h) {
-	my $V = $w . "x" . $h;
-	$w2widget{$w} = $r = new Gtk::RadioButton($r ? ($V, $r) : $V);
-	if ($chosen_w == $w) {
-	    &$set($r);
-	}
-	$r->signal_connect("clicked" => sub {
-			       $ignore and return;
-			       $chosen_w = $w;
-			       $no_human=1;
-			       $w2_combo->entry->set_text($w . "x" . $w2h{$w});
-			       unless (member($chosen_depth, @{$w2depth{$w}})) {
-				   $chosen_depth = max(@{$w2depth{$w}});
-				   &$set_depth();
-			       }
-			   });
-    }
-    gtkadd($W->{window},
-	   gtkpack_($W->create_box_with_title(_("Choose the resolution and the color depth"),
-					      "(" . ($card->{type} ? 
-						     _("Graphic card: %s", $card->{type}) :
-						     _("XFree86 server: %s", $card->{server})) . ")"
-					     ),
-		    1, gtkpack2(new Gtk::VBox(0,0),
-				gtkpack2__(new Gtk::VBox(0, $::isEmbedded ? 15 : 0),
-					   if_($::isEmbedded, $pixmap_m),
-					   if_(!$::isEmbedded, map {$w2widget{$_} } ikeys(%w2widget)),
-					   gtkpack2(new Gtk::HBox(0,0),
-						    create_packtable({ col_spacings => 5, row_spacings => 5},
-	     [ if_($::isEmbedded,$w2_combo) , new Gtk::Label("")],
-	     [ $depth_combo = new Gtk::Combo, gtkadd(gtkset_shadow_type(new Gtk::Frame, 'etched_out'), $pix_colors = gtkpng ("colors")) ],
-							     ),
-						   ),
-					  ),
-			       ),
-		    0, gtkadd($W->create_okcancel,
-			      $::isEmbedded ?
-			      gtksignal_connect(new Gtk::Button(_("Expert Mode")), clicked => sub { system ("XFdrake --expert"); }) :
-			      gtksignal_connect(new Gtk::Button(_("Show all")), clicked => sub { $W->{retval} = 1; $chosen_w = 0; Gtk->main_quit })),
-		    ));
-    $depth_combo->disable_activate;
-    $depth_combo->set_use_arrows_always(1);
-    $depth_combo->entry->set_editable(0);
-    $depth_combo->set_popdown_strings(map { translate($depths{$_}) } grep { $allowed_depth{$_} } ikeys(%{$card->{depth}}));
-    $depth_combo->entry->signal_connect(changed => sub {
-        $chosen_depth = $txt2depth{untranslate($depth_combo->entry->get_text, keys %txt2depth)};
-        my $w = $card->{depth}{$chosen_depth}[0][0];
-        $chosen_w > $w and &$set($w2widget{$chosen_w = $w});
-	$pix_colors->set(gtkcreate_png(
-               $chosen_depth >= 24 ? "colors.png" :
-	       $chosen_depth >= 15 ? "colors16.png" :
-	                             "colors8.png"));
-    });
-    if ($::isEmbedded) {
-	$w2_combo->disable_activate;
-	$w2_combo->set_use_arrows_always(1);
-	$w2_combo->entry->set_editable(0);
-	$w2_combo->set_popdown_strings(map { $_ . "x" . $w2h{$_} } keys %w2h);
-	$w2_combo->entry->signal_connect(changed => sub {
-	    ($chosen_w) = $w2_combo->entry->get_text =~ /([^x]*)x.*/;
-	    $no_human ? $no_human=0 : $w2widget{$chosen_w}->set_active(1);
-	    $pixmap_m->set($monitor{$chosen_w}[0], $monitor{$chosen_w}[1]);
-	});
-    }
-    &$set_depth();
-    $W->{ok}->grab_focus;
-
-    if ($::isEmbedded) {
-	$no_human=1;
-	$w2_combo->entry->set_text($chosen_w . "x" . $w2h{$chosen_w});
-    }
-    $W->main or return;
-    ($chosen_depth, $chosen_w);
-}
-
-sub chooseResolutions($$;$) {
-    goto &chooseResolutionsGtk if $in->isa('interactive_gtk');
-
-    my ($card, $chosen_depth, $chosen_w) = @_;
-
-    my $best_w;
-    my $allowed_depth = allowedDepth($card);
-
-    local $_ = $in->ask_from_list(_("Resolutions"), "", 
-				  [ map_each { if_(!$allowed_depth || exists $allowed_depth->{$::a},
-						   map { "$_->[0]x$_->[1] ${main::a}bpp" } @$::b) } %{$card->{depth}} ])
-      or return;
-    reverse /(\d+)x\S+ (\d+)/;
-}
-
-
-sub resolutionsConfiguration {
-    my ($o, $auto) = @_;
-    my $card = $o->{card};
-
-    #- For the mono and vga16 server, no further configuration is required.
-    if (member($card->{server}, "Mono", "VGA16")) {
-	$card->{depth}{8} = [[ 640, 480 ]];
-	return;
-    } elsif ($card->{server} =~ /Sun/) {
-	$card->{depth}{2} = [[ 1152, 864 ]] if $card->{server} =~ /^(SunMono)$/;
-	$card->{depth}{8} = [[ 1152, 864 ]] if $card->{server} =~ /^(SunMono|Sun)$/;
-	$card->{depth}{24} = [[ 1152, 864 ]] if $card->{server} =~ /^(SunMono|Sun|Sun24)$/;
-	$card->{default_wres} = 1152;
-	$o->{default_depth} = max(keys %{$card->{depth}});
-	return 1; #- aka we cannot test, assumed as good (should be).
-    }
-    if (is_empty_hash_ref($card->{depth})) {
-	$card->{depth}{$_} = [ map { [ split "x" ] } @resolutions ]
-	  foreach @depths;
-    }
-    #- sort resolutions in each depth
-    foreach (values %{$card->{depth}}) {
-	my $i = 0;
-	@$_ = grep { first($i != $_->[0], $i = $_->[0]) }
-	  sort { $b->[0] <=> $a->[0] } @$_;
-    }
-
-    #- remove unusable resolutions (based on the video memory size and the monitor hsync rate)
-    keepOnlyLegalModes($card, $o->{monitor});
-
-    my $res = $o->{resolution_wanted} || $card->{suggest_wres} || autoDefaultResolution($o->{monitor}{size});
-    my $wres = first(split 'x', $res);
-
-    #- take the first available resolution <= the wanted resolution
-    $wres = max map { first(grep { $_->[0] <= $wres } @$_)->[0] } values %{$card->{depth}};
-    my $depth = eval { $o->{default_depth} || autoDefaultDepth($card, $wres) };
-
-    $auto or ($depth, $wres) = chooseResolutions($card, $depth, $wres) or return;
-
-    #- if nothing has been found for wres,
-    #- try to find if memory used by mode found match the memory available
-    #- card, if this is the case for a relatively low resolution ( < 1024 ),
-    #- there could be a problem.
-    #- memory in KB is approximated by $wres*$dpeth/14 which is little less
-    #- than memory really used, (correct factor is 13.65333 for w/h ratio of 1.33333).
-    if (!$wres || $auto && ref($in) !~ /class_discard/ && ($wres < 1024 && ($card->{memory} / ($wres * $depth / 14)) > 2)) {
-	delete $card->{depth};
-	return resolutionsConfiguration($o);
-    }
-
-    #- needed in auto mode when all has been provided by the user
-    $card->{depth}{$depth} or die "you selected an unusable depth";
-
-    #- remove all biggest resolution (keep the small ones for ctl-alt-+)
-    #- otherwise there'll be a virtual screen :(
-    $_ = [ grep { $_->[0] <= $wres } @$_ ] foreach values %{$card->{depth}};
-    $card->{default_wres} = $wres;
-    $card->{vga_mode} = $vgamodes{"${wres}xx$depth"} || $vgamodes{"${res}x$depth"}; #- for use with frame buffer.
-    $o->{default_depth} = $depth;
-    1;
-}
-
-
-#- Create the XF86Config file.
-sub write_XF86Config {
-    my ($o, $file) = @_;
-    my $O;
-
-    $::g_auto_install and return;
-
-    local (*F, *G);
-    open F, ">$file"   or die "can't write XF86Config in $file: $!";
-    open G, ">$file-4" or die "can't write XF86Config in $file-4: $!";
-
-    print F $XF86firstchunk_text;
-    print G $XF86firstchunk_text;
-
-    #- Write keyboard section.
-    $O = $o->{keyboard};
-    print F $keyboardsection_start;
-    print G $keyboardsection_start_v4;
-    print F qq(    XkbDisable\n) unless $O->{xkb_keymap};
-    print G qq(    Option "XkbDisable"\n) unless $O->{xkb_keymap};
-    print F $keyboardsection_part3;
-    print G $keyboardsection_part3_v4;
-
-    $O->{xkb_model} ||= 
-      arch() =~ /sparc/ ? 'sun' :
-      $O->{xkb_keymap} eq 'br' ? 'abnt2' : 'pc105';
-    print F qq(    XkbModel        "$O->{xkb_model}"\n);
-    print G qq(    Option "XkbModel" "$O->{xkb_model}"\n);
-
-    print F qq(    XkbLayout       "$O->{xkb_keymap}"\n);
-    print G qq(    Option "XkbLayout" "$O->{xkb_keymap}"\n);
-    print F join '', map { "    $_\n" } @{$xkb_options{$O->{xkb_keymap}} || []};
-    print G join '', map { /(\S+)(.*)/; qq(    Option "$1" $2\n) } @{$xkb_options{$O->{xkb_keymap}} || []};
-    print F $keyboardsection_end;
-    print G $keyboardsection_end;
-
-    #- Write pointer section.
-    my $pointer = sub {
-	my ($O, $id) = @_;
-	print F $id > 1 ? qq(Section "XInput"\n) : qq(Section "Pointer"\n);
-	$id > 1 and print F qq(    SubSection "Mouse"\n);
-	print G qq(Section "InputDevice"\n\n);
-	$id > 1 and print F qq(        DeviceName "Mouse$id"\n);
-	print G qq(    Identifier  "Mouse$id"\n);
-	print G qq(    Driver      "mouse"\n);
-	print F ($id > 1 && "    ") . qq(    Protocol    "$O->{XMOUSETYPE}"\n);
-	print G qq(    Option "Protocol"    "$O->{XMOUSETYPE}"\n);
-	print F ($id > 1 && "    ") . qq(    Device      "/dev/$O->{device}"\n);
-	print G qq(    Option "Device"      "/dev/$O->{device}"\n);
-	print F "        AlwaysCore\n" if $id > 1;
-	#- this will enable the "wheel" or "knob" functionality if the mouse supports it
-	print F ($id > 1 && "    ") . "    ZAxisMapping 4 5\n" if $O->{nbuttons} > 3;
-	print F ($id > 1 && "    ") . "    ZAxisMapping 6 7\n" if $O->{nbuttons} > 5;
-	print G qq(    Option "ZAxisMapping" "4 5"\n) if $O->{nbuttons} > 3;
-	print G qq(    Option "ZAxisMapping" "6 7"\n) if $O->{nbuttons} > 5;
-
-	print F "#" unless $O->{nbuttons} < 3;
-	print G "#" unless $O->{nbuttons} < 3;
-	print F ($id > 1 && "    ") . qq(    Emulate3Buttons\n);
-	print G qq(    Option "Emulate3Buttons"\n);
-	print F "#" unless $O->{nbuttons} < 3;
-	print G "#" unless $O->{nbuttons} < 3;
-	print F ($id > 1 && "    ") . qq(    Emulate3Timeout    50\n\n);
-	print G qq(    Option "Emulate3Timeout"    "50"\n\n);
-	print F "# ChordMiddle is an option for some 3-button Logitech mice\n\n";
-	print G "# ChordMiddle is an option for some 3-button Logitech mice\n\n";
-	print F "#" unless $O->{chordmiddle};
-	print G "#" unless $O->{chordmiddle};
-	print F ($id > 1 && "    ") . qq(    ChordMiddle\n\n);
-	print G qq(    Option "ChordMiddle"\n\n);
-	print F ($id > 1 && "    ") . "    ClearDTR\n" if $O->{cleardtrrts};
-	print F ($id > 1 && "    ") . "    ClearRTS\n\n"  if $O->{cleardtrrts};
-	$id > 1 and print F qq(    EndSubSection\n);
-	print F "EndSection\n\n\n";
-	print G "EndSection\n\n\n";
-    };
-    print F $pointersection_text;
-    print G $pointersection_text;
-    $pointer->($o->{mouse}, 1);
-    $o->{mouse}{auxmouse} and $pointer->($o->{mouse}{auxmouse}, 2);
-
-    #- write module section for version 3.
-    if (@{$o->{wacom}} || $o->{card}{Utah_glx}) {
-	print F qq(Section "Module"
-);
-	print F qq(    Load "xf86Wacom.so"\n) if @{$o->{wacom}};
-	print F qq(    Load "glx-3.so"\n) if $o->{card}{Utah_glx}; #- glx.so may clash with server version 4.
-	print F qq(EndSection
-
-);
-    }
-
-    #- write wacom device support.
-    foreach (1 .. @{$o->{wacom}}) {
-	my $dev = "/dev/" . $o->{wacom}[$_-1];
-	print F $dev =~ /input\/event/ ? qq(
-Section "XInput"
-    SubSection "WacomStylus"
-        Port "$dev"
-        DeviceName "Stylus$_"
-        USB
-        AlwaysCore
-        Mode Absolute
-    EndSubSection
-    SubSection "WacomCursor"
-        Port "$dev"
-        DeviceName "Cursor$_"
-        USB
-        AlwaysCore
-        Mode Relative
-    EndSubSection
-    SubSection "WacomEraser"
-        Port "$dev"
-        DeviceName "Eraser$_"
-        USB
-        AlwaysCore
-        Mode Absolute
-    EndSubSection
-EndSection
-
-) : qq(
-Section "XInput"
-    SubSection "WacomStylus"
-        Port "$dev"
-        DeviceName "Stylus$_"
-        AlwaysCore
-        Mode Absolute
-    EndSubSection
-    SubSection "WacomCursor"
-        Port "$dev"
-        DeviceName "Sursor$_"
-        AlwaysCore
-        Mode Relative
-    EndSubSection
-    SubSection "WacomEraser"
-        Port "$dev"
-        DeviceName "Eraser$_"
-        AlwaysCore
-        Mode Absolute
-    EndSubSection
-EndSection
-
-);
-    }
-
-    foreach (1..@{$o->{wacom}}) {
-	my $dev = "/dev/" . $o->{wacom}[$_-1];
-	print G $dev =~ /input\/event/ ? qq(
-Section "InputDevice"
-    Identifier	"Stylus$_"
-    Driver	"wacom"
-    Option	"Type" "stylus"
-    Option	"Device" "$dev"
-    Option	"Mode" "Absolute"
-    Option	"USB" "on"
-EndSection
-Section "InputDevice"
-    Identifier	"Eraser$_"
-    Driver	"wacom"
-    Option	"Type" "eraser"
-    Option	"Device" "$dev"
-    Option	"Mode" "Absolute"
-    Option	"USB" "on"
-EndSection
-Section "InputDevice"
-    Identifier	"Cursor$_"
-    Driver	"wacom"
-    Option	"Type" "cursor"
-    Option	"Device" "$dev"
-    Option	"Mode" "Relative"
-    Option	"USB" "on"
-EndSection
-) : qq(
-Section "InputDevice"
-    Identifier	"Stylus$_"
-    Driver	"wacom"
-    Option	"Type" "stylus"
-    Option	"Device" "$dev"
-    Option	"Mode" "Absolute"
-EndSection
-Section "InputDevice"
-    Identifier	"Eraser$_"
-    Driver	"wacom"
-    Option	"Type" "eraser"
-    Option	"Device" "$dev"
-    Option	"Mode" "Absolute"
-EndSection
-Section "InputDevice"
-    Identifier	"Cursor$_"
-    Driver	"wacom"
-    Option	"Type" "cursor"
-    Option	"Device" "$dev"
-    Option	"Mode" "Relative"
-EndSection
-);
-    }
-
-    #- write modules section for version 4.
-    print G qq(
-Section "Module"
-
-# This loads the DBE extension module.
-
-    Load	"dbe"
-);
-    if ($o->{card}{DRI_glx}) {
-	print G qq(
-    Load	"glx"
-    Load	"dri"
-);
-    } elsif ($o->{card}{NVIDIA_glx}) {
-	print G qq(
-# This loads the NVIDIA GLX extension module.
-# IT IS IMPORTANT TO KEEP NAME AS FULL PATH TO libglx.so ELSE
-# IT WILL LOAD XFree86 glx module and the server will crash.
-
-    Load        "/usr/X11R6/lib/modules/extensions/libglx.so"
-);
-    }
-    print G qq(
-
-# This loads the miscellaneous extensions module, and disables
-# initialisation of the XFree86-DGA extension within that module.
-
-    SubSection	"extmod"
-	#Option	"omit xfree86-dga"
-    EndSubSection
-
-# This loads the Type1 and FreeType font modules
-
-    Load	"type1"
-    Load	"freetype"
-EndSection
-);
-    print G qq(
-
-Section "DRI"
-    Mode	0666
-EndSection
-
-) if $o->{card}{DRI_glx};
-
-    #- Write monitor section.
-    $O = $o->{monitor};
-    print F $monitorsection_text1;
-    print G $monitorsection_text1;
-    print F qq(    Identifier "$O->{type}"\n);
-    print G qq(    Identifier "$O->{type}"\n);
-    print G qq(    UseModes   "Mac Modes"\n) if arch() =~ /ppc/;
-    print F qq(    VendorName "$O->{vendor}"\n);
-    print G qq(    VendorName "$O->{vendor}"\n);
-    print F qq(    ModelName  "$O->{model}"\n\n);
-    print G qq(    ModelName  "$O->{model}"\n\n);
-    print F $monitorsection_text2;
-    print G $monitorsection_text2;
-    print F qq(    HorizSync  $O->{hsyncrange}\n\n);
-    print G qq(    HorizSync  $O->{hsyncrange}\n\n);
-    print F $monitorsection_text3;
-    print G $monitorsection_text3;
-    print F qq(    VertRefresh $O->{vsyncrange}\n\n);
-    print G qq(    VertRefresh $O->{vsyncrange}\n\n);
-    print F $monitorsection_text4;
-    print F ($O->{modelines} || '') . ($o->{card}{type} eq "TG 96" ?
-				       $modelines_text_Trident_TG_96xx : "$modelines_text$modelines_text_ext");
-    print G $modelines_text_ext;
-    print F "\nEndSection\n\n\n";
-    print G "\nEndSection\n\n\n";
-    print G $modelines_text_apple if arch() =~ /ppc/;
-    foreach (2..@{$o->{card}{cards} || []}) {
-	print G qq(Section "Monitor"\n);
-	print G qq(    Identifier "monitor$_"\n);
-	print G qq(    VendorName "$O->{vendor}"\n);
-	print G qq(    ModelName  "$O->{model}"\n\n);
-	print G qq(    HorizSync   $O->{hsyncrange}\n);
-	print G qq(    VertRefresh $O->{vsyncrange}\n);
-	print G qq(EndSection\n\n\n);
-    }
-
-    #- Write Device section.
-    $O = $o->{card};
-    print F $devicesection_text;
-    print G $devicesection_text_v4;
-    print F qq(Section "Device"\n);
-    print F qq(    Identifier  "$O->{type}"\n);
-    print F qq(    VendorName  "$O->{vendor}"\n);
-    print F qq(    BoardName   "$O->{board}"\n);
-
-    print F "#" if $O->{chipset} && !$O->{flags}{needChipset};
-    print F qq(    Chipset     "$O->{chipset}"\n) if $O->{chipset};
-
-    print F "#" if $O->{memory} && !$O->{flags}{needVideoRam};
-    print F "    VideoRam    $O->{memory}\n" if $O->{memory};
-
-    print F map { "    $_\n" } @{$O->{lines} || []};
-
-    print F qq(    Ramdac      "$O->{ramdac}"\n) if $O->{ramdac};
-    print F qq(    Dacspeed    "$O->{dacspeed}"\n) if $O->{dacspeed};
-
-    if ($O->{clockchip}) {
-	print F qq(    Clockchip   "$O->{clockchip}"\n);
-    } else {
-	print F "    # Clock lines\n";
-	print F "    Clocks $_\n" foreach (@{$O->{clocklines}});
-    }
-    print F qq(
-
-    # Uncomment following option if you see a big white block        
-    # instead of the cursor!                                          
-    #    Option      "sw_cursor"
-
-);
-    my $p_xf3 = sub {
-	my $l = $O->{$_[0]};
-	map { (!$l->{$_} && '#') . qq(    Option      "$_"\n) } keys %{$l || {}};
-    };
-    my $p_xf4 = sub {
-	my $l = $O->{$_[0]};
-	map { (! defined $l->{$_} && '#') . qq(    Option      "$_"  "$l->{$_}"\n) } keys %{$l || {}};
-    };
-    print F $p_xf3->('options');
-    print F $p_xf3->('options_xf3');
-    print F "EndSection\n\n\n";
-
-    #- configure all drivers here!
-    foreach (@{$O->{cards} || [ $O ]}) {
-	print G qq(Section "Device"\n);
-	print G qq(    Identifier  "$_->{type}"\n);
-	print G qq(    VendorName  "$_->{vendor}"\n);
-	print G qq(    BoardName   "$_->{board}"\n);
-	print G qq(    Driver      "$_->{driver}"\n);
-	print G "#" if $_->{memory} && !$_->{flags}{needVideoRam};
-	print G "    VideoRam    $_->{memory}\n" if $_->{memory};
-	print G map { "    $_\n" } @{$_->{lines} || []};
-	print G qq(    Ramdac      "$_->{ramdac}"\n) if $_->{ramdac};
-	print G qq(    Dacspeed    "$_->{dacspeed}"\n) if $_->{dacspeed};
-	if ($_->{clockchip}) {
-	    print G qq(    Clockchip   "$_->{clockchip}"\n);
-	} else {
-	    print G "    # Clock lines\n";
-	    print G "    Clocks $_\n" foreach (@{$_->{clocklines}});
-	}
-	print G qq(
-
-    # Uncomment following option if you see a big white block        
-    # instead of the cursor!                                          
-    #    Option      "sw_cursor"
-
-);
-	print G $p_xf3->('options'); #- keep $O for these!
-	print G $p_xf4->('options_xf4'); #- keep $O for these!
-	print G qq(    Screen $_->{screen}\n) if defined $_->{screen};
-	print G qq(    BusID       "$_->{busid}"\n) if $_->{busid};
-	print G "EndSection\n\n\n";
-    }
-
-    #- Write Screen sections.
-    print F $screensection_text1, "\n";
-    print G $screensection_text1, "\n";
-
-    my $subscreen = sub {
-	my ($f, $server, $defdepth, $depths) = @_;
-	print $f "    DefaultColorDepth $defdepth\n" if $defdepth;
-
-        foreach (ikeys(%$depths)) {
-	    my $m = $server ne "fbdev" ? join(" ", map { qq("$_->[0]x$_->[1]") } @{$depths->{$_}}) : qq("default"); #-"
-	    print $f qq(    Subsection "Display"\n);
-	    print $f qq(        Depth       $_\n) if $_;
-	    print $f qq(        Modes       $m\n);
-	    print $f qq(        ViewPort    0 0\n);
-	    print $f qq(    EndSubsection\n);
-	}
-	print $f "EndSection\n";
-    };
-
-    my $screen = sub {
-	my ($server, $defdepth, $device, $depths) = @_;
-	print F qq(
-Section "Screen"
-    Driver "$server"
-    Device      "$device"
-    Monitor     "$o->{monitor}{type}"
-); #-"
-	$subscreen->(*F, $server, $defdepth, $depths);
-    };
-
-    #- SVGA screen section.
-    print F qq(
-# The Colour SVGA server
-);
-
-    if (member($O->{server}, @svgaservers)) {
-	&$screen("svga", $o->{default_depth}, $O->{type}, $O->{depth});
-    } else {
-	&$screen("svga", '', "Generic VGA", { 8 => [[ 320, 200 ]] });
-    }
-
-    &$screen("vga16", '',
-	     (member($O->{server}, "Mono", "VGA16") ? $O->{type} : "Generic VGA"),
-	     { '' => [[ 640, 480 ], [ 800, 600 ]]});
-
-    &$screen("vga2", '',
-	     (member($O->{server}, "Mono", "VGA16") ? $O->{type} : "Generic VGA"),
-	     { '' => [[ 640, 480 ], [ 800, 600 ]]});
-
-    &$screen("accel", $o->{default_depth}, $O->{type}, $O->{depth});
-
-    &$screen("fbdev", $o->{default_depth}, $O->{type}, $O->{depth});
-
-    print G qq(
-Section "Screen"
-    Identifier "screen1"
-    Device      "$O->{type}"
-    Monitor     "$o->{monitor}{type}"
-);
-    #- hack for DRI with Matrox card at 24 bpp, need another command.
-    $O->{DRI_glx} && $O->{identifier} =~ /Matrox.* G[245][05]0/ && $o->{default_depth} == 24 and
-      print G "    DefaultFbBpp      32\n";
-    #- bpp 32 not handled by XF4
-    $subscreen->(*G, "svga", min($o->{default_depth}, 24), $O->{depth});
-    foreach (2..@{$O->{cards} || []}) {
-	my $device = $O->{cards}[$_ - 1]{type};
-	print G qq(
-Section "Screen"
-    Identifier "screen$_"
-    Device      "$device"
-    Monitor     "monitor$_"
-);
-	#- hack for DRI with Matrox card at 24 bpp, need another command.
-	$O->{DRI_glx} && $O->{identifier} =~ /Matrox.* G[245][05]0/ && $o->{default_depth} == 24 and
-	  print G "    DefaultFbBpp      32\n";
-	#- bpp 32 not handled by XF4
-	$subscreen->(*G, "svga", min($o->{default_depth}, 24), $O->{depth});
-    }
-
-    print G qq(
-
-Section "ServerLayout"
-    Identifier "layout1"
-    Screen     "screen1"
-);
-    foreach (2..@{$O->{cards} || []}) {
-	my ($curr, $prev) = ($_, $_ - 1);
-	print G qq(    Screen     "screen$curr" RightOf "screen$prev"\n);
-    }
-    print G '#' if defined $O->{Xinerama} && !$O->{Xinerama};
-    print G qq(    Option     "Xinerama" "on"\n) if defined $O->{Xinerama};
-
-    print G '
-    InputDevice "Mouse1" "CorePointer"
-';
-    $o->{mouse}{auxmouse} and print G '
-    InputDevice "Mouse2" "SendCoreEvents"
-';
-    foreach (1..@{$o->{wacom}}) {
-	print G qq(
-    InputDevice "Stylus$_" "AlwaysCore"
-    InputDevice "Eraser$_" "AlwaysCore"
-    InputDevice "Cursor$_" "AlwaysCore"
-);
-    }
-    print G '
-    InputDevice "Keyboard1" "CoreKeyboard"
-EndSection
-'; #-"
-
-    close F;
-    close G;
-}
-
-sub XF86check_link {
-    my ($ext) = @_;
-
-    my $f = "$prefix/etc/X11/XF86Config$ext";
-    touch($f);
-
-    my $l = "$prefix/usr/X11R6/lib/X11/XF86Config$ext";
-
-    if (-e $l && (stat($f))[1] != (stat($l))[1]) { #- compare the inode, must be the sames
-	-e $l and unlink($l) || die "can't remove bad $l";
-	symlinkf "../../../../etc/X11/XF86Config$ext", $l;
-    }
-}
-
-sub info {
-    my ($o) = @_;
-    my $info;
-    my $xf_ver = $o->{card}{use_xf4} ? "4.1.0" : "3.3.6";
-    my $title = ($o->{card}{DRI_glx} || $o->{card}{NVIDIA_glx} || $o->{Utah_glx} ?
-		 _("XFree %s with 3D hardware acceleration", $xf_ver) : _("XFree %s", $xf_ver));
-
-    $info .= _("Keyboard layout: %s\n", $o->{keyboard}{xkb_keymap});
-    $info .= _("Mouse type: %s\n", $o->{mouse}{XMOUSETYPE});
-    $info .= _("Mouse device: %s\n", $o->{mouse}{device}) if $::expert;
-    $info .= _("Monitor: %s\n", $o->{monitor}{type});
-    $info .= _("Monitor HorizSync: %s\n", $o->{monitor}{hsyncrange}) if $::expert;
-    $info .= _("Monitor VertRefresh: %s\n", $o->{monitor}{vsyncrange}) if $::expert;
-    $info .= _("Graphic card: %s\n", $o->{card}{type});
-    $info .= _("Graphic card identification: %s\n", $o->{card}{identifier}) if $::expert;
-    $info .= _("Graphic memory: %s kB\n", $o->{card}{memory}) if $o->{card}{memory};
-    if ($o->{default_depth} and my $depth = $o->{card}{depth}{$o->{default_depth}}) {
-	$info .= _("Color depth: %s\n", translate($depths{$o->{default_depth}}));
-	$info .= _("Resolution: %s\n", join "x", @{$depth->[0]}) if $depth && !is_empty_array_ref($depth->[0]);
-    }
-    $info .= _("XFree86 server: %s\n", $o->{card}{server}) if $o->{card}{server};
-    $info .= _("XFree86 driver: %s\n", $o->{card}{driver}) if $o->{card}{driver};
-    "$title\n\n$info";
-}
-
-sub show_info {
-    my ($o) = @_;
-    $in->ask_warn('', info($o));
-}
-
-#- Program entry point.
-sub main {
-    ($prefix, my $o, $in, $do_pkgs, my $cardOptions) = @_;
-    $o ||= {};
-
-    XF86check_link('');
-    XF86check_link('-4');
-
-    {
-	my $w = $in->wait_message('', _("Preparing X-Window configuration"), 1);
-
-	$o->{card} = cardConfiguration($o->{card}, $::noauto, $cardOptions);
-
-	$o->{monitor} = monitorConfiguration($o->{monitor}, $o->{card}{server} eq 'FBDev');
-    }
-    my $ok = resolutionsConfiguration($o, $::auto);
-
-    $ok &&= testFinalConfig($o, $::auto, $o->{skiptest}, $::auto);
-
-    my $quit;
-    until ($ok || $quit) {
-	ref($in) =~ /discard/ and die "automatic X configuration failed, ensure you give hsyncrange and vsyncrange with non-DDC aware videocards/monitors";
-
-	$in->set_help('configureXmain') unless $::isStandalone;
-
-	my $f;
-	$in->ask_from_(
-		{ 
-		 title => 'XFdrake',
-		 messages => _("What do you want to do?"),
-		 cancel => '',
-		}, [
-		    { format => sub { $_[0][0] }, val => \$f,
-		      list => [
-	   [ _("Change Monitor") => sub { $o->{monitor} = monitorConfiguration() } ],
-           [ _("Change Graphic card") => sub { $o->{card} = cardConfiguration('', 'noauto', $cardOptions) } ],
-                    if_($::expert, 
-           [ _("Change Server options") => sub { optionsConfiguration($o) } ]),
-	   [ _("Change Resolution") => sub { resolutionsConfiguration($o) } ],
-	   [ _("Show information") => sub { show_info($o) } ],
-	   [ _("Test again") => sub { $ok = testFinalConfig($o, 1) } ],
-	   [ _("Quit") => sub { $quit = 1 } ],
-			       ],
-		    }
-		   ]);
-	$f->[1]->();
-	$in->kill;
-    }
-    if (!$ok) {
-	$ok = $in->ask_yesorno('', _("Keep the changes?
-Current configuration is:
-
-%s", info($o)));
-    }
-    if ($ok) {
-	unless ($::testing) {
-	    my $f = "$prefix/etc/X11/XF86Config";
-	    if (-e "$f.test") {
-		rename $f, "$f.old" or die "unable to make a backup of XF86Config";
-		rename "$f-4", "$f-4.old";
-		rename "$f.test", $f;
-		rename "$f.test-4", "$f-4";
-		if ($o->{card}{server} !~ /Xpmac/) {
-		    symlinkf "../..$o->{card}{prog}", "$prefix/etc/X11/X";
-		}
-	    }
-	}
-
-	if ($::isStandalone && $0 =~ /Xdrakres/) {
-	    my $found;
-	    foreach (@window_managers) {
-		if (`pidof "$_"` > 0) {
-		    if ($in->ask_okcancel('', _("Please relog into %s to activate the changes", ucfirst $_), 1)) {
-			fork and $in->exit;
-			system("kwmcom logout") if /kwm/;
-			system("dcop kdesktop default logout") if /kwin/;
-			system("save-session --kill") if /gnome-session/;
-			system("killall -QUIT icewm") if /icewm/;
-
-			open STDIN, "</dev/zero";
-			open STDOUT, ">/dev/null";
-			open STDERR, ">&STDERR";
-			c::setsid();
-		        exec qw(perl -e), q{
-                          my $wm = shift;
-  		          for (my $nb = 30; $nb && `pidof "$wm"` > 0; $nb--) { sleep 1 }
-  		          system("killall X ; killall -15 xdm gdm kdm prefdm") unless `pidof "$wm"` > 0;
-  		        }, $_;
-		    }
-		    $found = 1; last;
-		}
-	    }
-	    $in->ask_warn('', _("Please log out and then use Ctrl-Alt-BackSpace")) unless $found;
-	} else {
-	    $in->set_help('configureXxdm') unless $::isStandalone;
-	    my $run = exists $o->{xdm} ? $o->{xdm} : $::auto || $in->ask_yesorno(_("X at startup"),
-_("I can set up your computer to automatically start X upon booting.
-Would you like X to start when you reboot?"), 1);
-	    any::runlevel($prefix, $run ? 5 : 3) unless $::testing;
-	}
-    }
-}
-
-1;
diff --git a/perl-install/Xconfigurator_consts.pm b/perl-install/Xconfigurator_consts.pm
deleted file mode 100644
index 29f170a16..000000000
--- a/perl-install/Xconfigurator_consts.pm
+++ /dev/null
@@ -1,832 +0,0 @@
-package Xconfigurator; # $Id$
-
-use common;
-
-%depths = (
-      8 => __("256 colors (8 bits)"),
-     15 => __("32 thousand colors (15 bits)"),
-     16 => __("65 thousand colors (16 bits)"),
-     24 => __("16 million colors (24 bits)"),
-     32 => __("4 billion colors (32 bits)"),
-);
-@depths = ikeys(%depths);
-
-@resolutions        = qw(640x480 800x600 1024x768 1152x864 1280x1024 1400x1050 1600x1200 1920x1440 2048x1536);
-
-@window_managers = ('kdeinit: kwin', qw(gnome-session icewm wmaker kwm afterstep fvwm fvwm2 fvwm95 mwm twm enlightenment xfce blackbox sawfish));
-
-%serversdriver = arch() =~ /^sparc/ ? (
-    'Mach64'    => "accel",
-    '3DLabs'    => "accel",
-    'Sun'       => "fbdev",
-    'Sun24'     => "fbdev",
-    'SunMono'   => "fbdev",
-    'VGA16'     => "vga16",
-    'FBDev'     => "fbdev",
-) : (
-    'SVGA'      => "svga",
-#-    'Rage128'   => "svga",
-#-    '3dfx'      => "svga",
-    'S3'        => "accel",
-    'Mach32'    => "accel",
-    'Mach8'     => "accel",
-    '8514'      => "accel",
-    'P9000'     => "accel",
-    'AGX'       => "accel",
-    'W32'       => "accel",
-    'Mach64'    => "accel",
-    'I128'      => "accel",
-    'S3V'       => "accel",
-    '3DLabs'    => "accel",
-    'Mono'      => "vga2",
-    'VGA16'     => "vga16",
-    'FBDev'     => "fbdev",
-);
-@svgaservers = grep { $serversdriver{$_} eq "svga" } keys(%serversdriver);
-@accelservers = grep { $serversdriver{$_} eq "accel" } keys(%serversdriver);
-@allbutfbservers = grep { arch() =~ /^sparc/ || $serversdriver{$_} ne "fbdev" } keys(%serversdriver);
-@allservers = keys(%serversdriver);
-
-%vgamodes = (
-    '640xx8'       => 769,
-    '640x480x8'    => 769,
-    '800xx8'       => 771,
-    '800x600x8'    => 771,
-    '1024xx8'      => 773,
-    '1024x768x8'   => 773,
-    '1280xx8'      => 775,
-    '1280x1024x8'  => 775,
-    '640xx15'      => 784,
-    '640x480x15'   => 784,
-    '800xx15'      => 787,
-    '800x600x15'   => 787,
-    '1024xx15'     => 790,
-    '1024x768x15'  => 790,
-    '1280xx15'     => 793,
-    '1280x1024x15' => 793,
-    '640xx16'      => 785,
-    '640x480x16'   => 785,
-    '800xx16'      => 788,
-    '800x600x16'   => 788,
-    '1024xx16'     => 791,
-    '1024x768x16'  => 791,
-    '1280xx16'     => 794,
-    '1280x1024x16' => 794,
-#-    '640xx24'      => 786, #- there is a problem with these resolutions since the BIOS may take 24 or 32 planes.
-#-    '640x480x24'   => 786,
-#-    '800xx24'      => 789,
-#-    '800x600x24'   => 789,
-#-    '1024xx24'     => 792,
-#-    '1024x768x24'  => 792,
-#-    '1280xx24'     => 795,
-#-    '1280x1024x24' => 795,
-);
-
-{ #- @monitorSize2resolution
-    my %l = my @l = ( #- size in inch
-	13 => "640x480",
-	14 => "800x600",
-	15 => "800x600",
-	16 => "1024x768",
-	17 => "1024x768",
-	18 => "1024x768",
-	19 => "1280x1024",
-	20 => "1280x1024",
-        21 => "1600x1200",
-    );
-    for (my $i = 0; $i < $l[0]; $i++) {
-	$monitorSize2resolution[$i] = $l[1];
-    }
-    while (my ($s, $r) = each %l) {
-	$monitorSize2resolution[$s] = $r;
-    }
-}
-
-%videomemory = (
-    __("256 kB") => 256,
-    __("512 kB") => 512,
-    __("1 MB") => 1024,
-    __("2 MB") => 2048,
-    __("4 MB") => 4096,
-    __("8 MB") => 8192,
-    __("16 MB") => 16384,
-    __("32 MB") => 32768,
-    __("64 MB or more") => 65536,
-);
-
-$good_default_monitor = arch !~ /ppc/ ? "High Frequency SVGA, 1024x768 at 70 Hz" : 
-    detect_devices::get_mac_model =~ /^iBook/ ? "iBook 800x600" : "iMac/PowerBook 1024x768";
-$low_default_monitor = "Super VGA, 800x600 at 56 Hz";
-
-%standard_monitors = (
-  __("Standard VGA, 640x480 at 60 Hz")                             => [ '640x480@60',      "31.5"            , "60" ],
-  __("Super VGA, 800x600 at 56 Hz") 				   => [ '800x600@56',      "31.5-35.1"       , "55-60" ],
-  __("8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)") => [ '8514 compatible', "31.5,35.5"       , "60,70,87" ],
-  __("Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz")  => [ '1024x768@87i',    "31.5,35.15,35.5" , "55-90" ],
-  __("Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz")     => [ '800x600@60',      "31.5-37.9"       , "55-90" ],
-  __("Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz")   => [ '1024x768@60',     "31.5-48.5"       , "55-90" ],
-  __("High Frequency SVGA, 1024x768 at 70 Hz") 		           => [ '1024x768@70',     "31.5-57.0"       , "50-90" ],
-  __("Multi-frequency that can do 1280x1024 at 60 Hz") 	           => [ '1280x1024@60',    "31.5-64.3"       , "50-90" ],
-  __("Multi-frequency that can do 1280x1024 at 74 Hz") 	           => [ '1280x1024@74',    "31.5-79.0"       , "50-100" ],
-  __("Multi-frequency that can do 1280x1024 at 76 Hz") 	           => [ '1280x1024@76',    "31.5-82.0"       , "40-100" ],
-  __("Monitor that can do 1600x1200 at 70 Hz")                     => [ '1600x1200@70',    "31.5-88.0"       , "50-120" ],
-  __("Monitor that can do 1600x1200 at 76 Hz")		           => [ '1600x1200@76',    "31.5-94.0"       , "50-160" ],
-);
-
-@vsyncranges = ("50-70", "50-90", "50-100", "40-150");
-
-@hsyncranges = (
-	"31.5",
-	"31.5-35.1",
-	"31.5, 35.5",
-	"31.5, 35.15, 35.5",
-	"31.5-37.9",
-	"31.5-48.5",
-	"31.5-57.0",
-	"31.5-64.3",
-	"31.5-79.0",
-	"31.5-82.0",
-	"31.5-88.0",
-	"31.5-94.0",
-);
-
-%min_hsync4wres = (
-	 640 => 31.5,
-	 800 => 35.1,
-	1024 => 35.5,
-	1152 => 44.0,
-	1280 => 51.0,
-	1400 => 65.5,
-	1600 => 75.0,
-	1920 => 90.0,
-	2048 => 136.5,
-);
-
-
-%lines = (
-#-    'Cirrus Logic|GD 5446' => [ '	Option "no_bitblt"' ],
-      'Silicon Integrated Systems [SiS]|86C326' => [ qq(	Option "noaccel"\n	Option "sw_cursor") ],
-      'Neomagic Corporation|NM2160 [MagicGraph 128XD]' => [ 'Option "XaaNoScanlineImageWriteRect"', 'Option "XaaNoScanlineCPUToScreenColorExpandFill' ],
-
-#-      'Trident Microsystems|Cyber 9525' => [ '	Option "noaccel"' ],
-#-      'S3 Inc.|86c368 [Trio 3D/2X]' => [ '	ChipID  0x8a10' ],
-);
-
-#- most usefull XFree86-4.0.1 server options. Default values is the first ones.
-@options_serverflags = (
-			'NoTrapSignals'           => [ "Off", "On" ],
-			'DontZap'                 => [ "Off", "On" ],
-			'DontZoom'                => [ "Off", "On" ],
-			'DisableVidModeExtension' => [ "Off", "On" ],
-			'AllowNonLocalXvidtune'   => [ "Off", "On" ],
-			'DisableModInDev'         => [ "Off", "On" ],
-			'AllowNonLocalModInDev'   => [ "Off", "On" ],
-			'AllowMouseOpenFail'      => [ "False", "True" ],
-			'VTSysReq'                => [ "Off", "On" ],
-			'BlankTime'               => [ "10", "5", "3", "15", "30" ],
-			'StandByTime'             => [ "20", "10", "6", "30", "60" ],
-			'SuspendTime'             => [ "30", "15", "9", "45", "90" ],
-			'OffTime'                 => [ "40", "20", "12", "60", "120" ],
-			'Pixmap'                  => [ "32", "24" ],
-			'PC98'                    => [ "auto-detected", "False", "True" ],
-			'NoPM'                    => [ "False", "True" ],
-);
-
-#- most usefull server options have to be accessible at the beginning, since
-#- no more than a small set of options will be available for the user, maybe ?
-@options = (
-	    [ 'DPMS',              'XFree86',     '.*' ],
-	    [ 'SyncOnGreen',       'XFree86',     '.*' ],
-	    [ 'power_saver',       'Mono',        '.*' ],
-	    [ 'hibit_low',         'VGA16',       'Tseng.*ET4000' ],
-	    [ 'hibit_high',        'VGA16',       'Tseng.*ET4000' ],
-	    [ 'power_saver',       'VGA16',       '.*' ],
-	    [ 'noaccel',           'SVGA',        'Cirrus|C&T|SiS|Oak|Western Digital|Alliance|Trident|Tseng' ],
-	    [ 'no_accel',          'SVGA',        'ARK|MGA|i740|Oak|ET6000|W32|Media.*GX|Neomagic' ],
-	    [ 'linear',            'SVGA',        'Cirrus|ET6000|ET4000/W32p rev [CD]|Oak|Neomagic|Triden|Tseng' ],
-	    [ 'nolinear',          'SVGA',        'Cirrus|C&T|Trident' ],
-	    [ 'no_linear',         'SVGA',        'ARK|SiS|Neomagic|Tseng' ],
-	    [ 'no_bitblt',         'SVGA',        'Cirrus|C&T|SiS' ],
-	    [ 'no_imageblt',       'SVGA',        'Cirrus|C&T|SiS' ],
-	    [ 'sw_cursor',         'SVGA',        '.*' ],
-	    [ 'slow_dram',         'SVGA',        'Cirrus|Trident|ET6000|W32|Western Digital|Tseng' ],
-	    [ 'mga_sdram',         'SVGA',        'MGA' ],
-	    [ 'no_pixmap_cache',   'SVGA',        'ARK|Cirrus|C&T|MGA|SiS|Trident.*9440|Trident.*9680|Tseng' ],
-	    [ 'no_mmio',           'SVGA',        'Cirrus|Neomagic|Trident' ],
-	    [ 'pci_burst_off',     'SVGA',        'ET6000|W32|Trident|Tseng' ],
-	    [ 'hw_clocks',         'SVGA',        'SiS|C&T' ],
-	    [ 'use_modeline',      'SVGA',        'C&T' ],
-	    [ 'enable_bitblt',     'SVGA',        'Oak' ],
-	    [ 'w32_interleave_off', 'SVGA',       'ET6000|W32|Tseng' ],
-	    [ 'fifo_conservative', 'SVGA',        'Cirrus|ARK|SiS|Oak' ],
-	    [ 'fifo_moderate',     'SVGA',        'Cirrus|ARK|SiS' ],
-	    [ 'all_wait',          'SVGA',        'Oak' ],
-	    [ 'one_wait',          'SVGA',        'Oak' ],
-	    [ 'first_wait',        'SVGA',        'Oak' ],
-	    [ 'first_wwait',       'SVGA',        'Oak' ],
-	    [ 'write_wait',        'SVGA',        'Oak' ],
-	    [ 'read_wait',         'SVGA',        'Oak' ],
-	    [ 'clgd6225_lcd',      'SVGA',        'Cirrus' ],
-	    [ 'fix_panel_size',    'SVGA',        'C&T' ],
-	    [ 'lcd_center',        'SVGA',        'C&T|Neomagic|Trident' ],
-	    [ 'cyber_shadow',      'SVGA',        'Trident' ],
-	    [ 'STN',               'SVGA',        'C&T' ],
-	    [ 'no_stretch',        'SVGA',        'C&T|Cirrus|Neomagic|Trident' ],
-	    [ 'no_prog_lcd_mode_regs', 'SVGA',    'Neomagic' ],
-	    [ 'prog_lcd_mode_stretch', 'SVGA',    'Neomagic' ],
-	    [ 'suspend_hack',      'SVGA',        'C&T' ],
-	    [ 'use_18bit_bus',     'SVGA',        'C&T' ],
-	    [ 'hibit_low',         'SVGA',        'Tseng.*ET4000' ],
-	    [ 'hibit_high',        'SVGA',        'Tseng.*ET4000' ],
-	    [ 'probe_clocks',      'SVGA',        'Cirrus' ],
-	    [ 'power_saver',       'SVGA',        '.*' ],
-	    [ 'use_vlck1',         'SVGA',        'C&T' ],
-	    [ 'sgram',             'SVGA',        'i740' ],
-	    [ 'sdram',             'SVGA',        'i740' ],
-	    [ 'no_2mb_banksel',    'SVGA',        'Cirrus' ],
-	    [ 'tgui_pci_read_on',  'SVGA',        'Trident' ],
-	    [ 'tgui_pci_write_on', 'SVGA',        'Trident' ],
-	    [ 'no_program_clocks', 'SVGA',        'Trident' ],
-	    [ 'mmio',              'SVGA',        'Cirrus|C&T|Neomagic' ],
-	    [ 'sync_on_green',     'SVGA',        'C&T|MGA' ],
-	    [ 'pci_retry',         'SVGA',        'Tseng|MGA|Cirrus' ],
-	    [ 'hw_cursor',         'SVGA',        'C&T|SiS|ARK|ET6000|i740|Tseng' ],
-	    [ 'xaa_no_color_exp',  'SVGA',        'C&T|Cirrus|Trident|Tseng' ],
-	    [ 'xaa_benchmarks',    'SVGA',        'C&T' ],
-	    [ 'pci_burst_on',      'SVGA',        'Trident|Tseng' ],
-	    [ 'prog_lcd_mode_regs', 'SVGA',       'Neomagic' ],
-	    [ 'no_prog_lcd_mode_stretch', 'SVGA', 'Neomagic' ],
-	    [ 'no_wait',           'SVGA',        'Oak' ],
-	    #- [ 'med_dram',          'SVGA',        'Cirrus|Trident|Western Digital' ], #- WARNING, MAY DAMAGE CARD
-	    #- [ 'fast_dram',         'SVGA',        'C&T|Cirrus|ET[46]000|Trident|Western Digital' ], #- WARNING, MAY DAMAGE CARD
-	    #- [ 'fast_vram',         'SVGA',        'SiS' ], #- WARNING, MAY DAMAGE CARD
-	    #- [ 'clock_50',          'SVGA',        'Oak' ], #- WARNING, MAY DAMAGE CARD
-	    #- [ 'clock_66',          'SVGA',        'Oak' ], #- WARNING, MAY DAMAGE CARD
-	    #- [ 'fifo_aggressive',   'SVGA',        'Cirrus|ARK|SiS|Oak' ], #- WARNING, MAY DAMAGE CARD
-	    #- [ 'override_validate_mode', 'SVGA',   'Neomagic' ], #- WARNING, MAY DAMAGE CARD
-	    #- [ 'tgui_mclk_66',      'SVGA',        'Trident' ], #- WARNING, MAY DAMAGE CARD
-	    #- [ 'favour_bitblt',     'SVGA',        'Cirrus' ], #- OBSELETE
-	    [ 'sw_cursor',         '3DLabs',      '.*' ],
-	    [ 'no_pixmap_cache',   '3DLabs',      '.*' ],
-	    [ 'no_accel',          '3DLabs',      '.*' ],
-	    [ 'firegl_3000',       '3DLabs',      '.*' ],
-	    [ 'sync_on_green',     '3DLabs',      '.*' ],
-	    [ 'pci_retry',         '3DLabs',      '.*' ],
-	    #- [ 'overclock_mem',     '3DLabs',      '.*' ], #- WARNING, MAY DAMAGE CARD
-	    [ 'dac_8_bit',         'I128',        '.*' ],
-	    [ 'no_accel',          'I128',        '.*' ],
-	    [ 'sync_on_green',     'I128',        '.*' ],
-	    [ 'composite',         'Mach32',      '.*' ],
-	    [ 'sw_cursor',         'Mach32',      '.*' ],
-	    [ 'dac_8_bit',         'Mach32',      '.*' ],
-	    [ 'ast_mach32',        'Mach32',      '.*' ],
-	    [ 'intel_gx',          'Mach32',      '.*' ],
-	    [ 'no_linear',         'Mach32',      '.*' ],
-	    [ 'sw_cursor',         'Mach64',      '.*' ],
-	    [ 'nolinear',          'Mach64',      '.*' ],
-	    [ 'no_block_write',    'Mach64',      '.*' ],
-	    [ 'block_write',       'Mach64',      '.*' ],
-	    [ 'fifo_conservative', 'Mach64',      '.*' ],
-	    [ 'no_font_cache',     'Mach64',      '.*' ],
-	    [ 'no_pixmap_cache',   'Mach64',      '.*' ],
-	    [ 'composite',         'Mach64',      '.*' ],
-	    [ 'power_saver',       'Mach64',      '.*' ],
-	    [ 'no_program_clocks', 'Mach64',      '.*' ],
-	    [ 'no_bios_clocks',    'Mach64',      '.*' ],
-	    [ 'dac_6_bit',         'Mach64',      '.*' ],
-	    [ 'dac_8_bit',         'Mach64',      '.*' ],
-	    [ 'hw_cursor',         'Mach64',      '.*' ],
-	    #- [ 'override_bios',     'Mach64',      '.*' ], #- WARNING, MAY DAMAGE CARD
-	    [ 'sw_cursor',         'P9000',       '.*' ],
-	    [ 'noaccel',           'P9000',       '.*' ],
-	    [ 'sync_on_green',     'P9000',       '.*' ],
-	    [ 'vram_128',          'P9000',       '.*' ],
-	    [ 'nolinear',          'S3',          '.*' ],
-	    [ 'dac_8_bit',         'S3',          '.*' ],
-	    [ 'slow_vram',         'S3',          'S3.*964' ],
-	    [ 'stb_pegasus',       'S3',          'S3.*928' ],
-	    [ 'SPEA_Mercury',      'S3',          'S3.*(928|964)' ],
-	    [ 'number_nine',       'S3',          'S3.*(864|928)' ],
-	    [ 'lcd_center',        'S3',          'S3.*Aurora64V' ],
-	    [ 'noaccel',           'S3V',         '.*' ],
-	    [ 'slow_edodram',      'S3V',         '.*' ],
-	    [ 'pci_burst_on',      'S3V',         '.*' ],
-	    [ 'early_ras_precharge', 'S3V',       '.*' ],
-	    [ 'late_ras_precharge', 'S3V',        '.*' ],
-	    [ 'fifo_conservative', 'S3V',         '.*' ],
-	    [ 'fifo_aggressive',   'S3V',         '.*' ],
-	    [ 'fifo_moderate',     'S3V',         '.*' ],
-	    [ 'lcd_center',        'S3V',         'S3.*ViRGE\/MX' ],
-	    [ 'hw_cursor',         'S3V',         '.*' ],
-	    [ 'pci_retry',         'S3V',         '.*' ],
-	    [ 'dac_6_bit',         'AGX',         '.*' ],
-	    [ 'dac_8_bit',         'AGX',         '.*' ],
-	    [ 'sync_on_green',     'AGX',         '.*' ],
-	    [ '8_bit_bus',         'AGX',         '.*' ],
-	    [ 'wait_state',        'AGX',         '.*' ],
-	    [ 'no_wait_state',     'AGX',         '.*' ],
-	    [ 'noaccel',           'AGX',         '.*' ],
-	    [ 'crtc_delay',        'AGX',         '.*' ],
-	    [ 'fifo_conserv',      'AGX',         '.*' ],
-	    [ 'fifo_aggressive',   'AGX',         '.*' ],
-	    [ 'fifo_moderate',     'AGX',         '.*' ],
-	    [ 'vram_delay_latch',  'AGX',         '.*' ],
-	    [ 'vram_delay_ras',    'AGX',         '.*' ],
-	    [ 'vram_extend_ras',   'AGX',         '.*' ],
-	    [ 'slow_dram',         'AGX',         '.*' ],
-	    [ 'slow_vram',         'AGX',         '.*' ],
-	    [ 'med_dram',          'AGX',         '.*' ],
-	    [ 'med_vram',          'AGX',         '.*' ],
-	    [ 'fast_dram',         'AGX',         '.*' ],
-	    [ 'fast_vram',         'AGX',         '.*' ],
-	    [ 'engine_delay',      'AGX',         '.*' ],
-	    [ 'vram_128',          'AGX',         '.*' ],
-	    [ 'vram_256',          'AGX',         '.*' ],
-	    [ 'refresh_20',        'AGX',         '.*' ],
-	    [ 'refresh_25',        'AGX',         '.*' ],
-	    [ 'screen_refresh',    'AGX',         '.*' ],
-	    [ 'vlb_a',             'AGX',         '.*' ],
-	    [ 'vlb_b',             'AGX',         '.*' ],
-	    [ 'slow_dram',         'W32',         '.*' ],
-	    [ 'pci_burst_off',     'W32',         '.*' ],
-	    [ 'w32_interleave_off', 'W32',        '.*' ],
-	    [ 'no_accel',          'W32',         '.*' ],
-	    [ 'nolinear',          '8514',        '.*' ],
-	    [ 'sw_cursor',         '8514',        '.*' ],
-	    [ 'no_block_write',    '8514',        '.*' ],
-	    [ 'block_write',       '8514',        '.*' ],
-	    [ 'fifo_conservative', '8514',        '.*' ],
-	    [ 'no_font_cache',     '8514',        '.*' ],
-	    [ 'no_pixmap_cache',   '8514',        '.*' ],
-	    [ 'composite',         '8514',        '.*' ],
-	    [ 'power_saver',       '8514',        '.*' ],
-	    [ 'power_saver',       'FBDev',       '.*' ],
-);
-
-%xkb_options = (
-    'ru(winkeys)' => [ 'XkbOptions "grp:caps_toggle"' ],
-    'jp' => [ 'XkbModel "jp106"' ], 
-);
-
-$XF86firstchunk_text = q(
-# File generated by XFdrake.
-
-# **********************************************************************
-# Refer to the XF86Config(4/5) man page for details about the format of
-# this file.
-# **********************************************************************
-
-Section "Files"
-
-    RgbPath	"/usr/X11R6/lib/X11/rgb"
-
-# Multiple FontPath entries are allowed (they are concatenated together)
-# By default, Mandrake 6.0 and later now use a font server independent of
-# the X server to render fonts.
-
-    FontPath   "unix/:-1"
-
-EndSection
-
-# **********************************************************************
-# Server flags section.
-# **********************************************************************
-
-Section "ServerFlags"
-
-    # Uncomment this to cause a core dump at the spot where a signal is
-    # received.  This may leave the console in an unusable state, but may
-    # provide a better stack trace in the core dump to aid in debugging
-    #NoTrapSignals
-
-    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
-    # This allows clients to receive this key event.
-    #DontZap
-
-    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
-    # sequences.  This allows clients to receive these key events.
-    #DontZoom
-
-    # This  allows  the  server  to start up even if the
-    # mouse device can't be opened/initialised.
-    AllowMouseOpenFail
-
-EndSection
-
-# **********************************************************************
-# Input devices
-# **********************************************************************
-);
-
-$keyboardsection_start = '
-# **********************************************************************
-# Keyboard section
-# **********************************************************************
-
-Section "Keyboard"
-
-    Protocol    "Standard"
-
-    # when using XQUEUE, comment out the above line, and uncomment the
-    # following line
-    #Protocol   "Xqueue"
-
-    AutoRepeat  250 30
-
-    # Let the server do the NumLock processing.  This should only be
-    # required when using pre-R6 clients
-    #ServerNumLock
-
-    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
-    #Xleds      "1 2 3"
-
-    #To set the LeftAlt to Meta, RightAlt key to ModeShift,
-    #RightCtl key to Compose, and ScrollLock key to ModeLock:
-
-    LeftAlt        Meta
-    RightAlt       Meta
-    ScrollLock     Compose
-    RightCtl       Control
-
-# To disable the XKEYBOARD extension, uncomment XkbDisable.
-
-#    XkbDisable
-';
-
-$keyboardsection_start_v4 = '
-# **********************************************************************
-# Keyboard section
-# **********************************************************************
-
-Section "InputDevice"
-
-    Identifier "Keyboard1"
-    Driver      "Keyboard"
-    Option "AutoRepeat"  "250 30"
-';
-
-if (arch() =~ /^sparc/) {
-    $keyboardsection_part3 = '
-# To customise the XKB settings to suit your keyboard, modify the
-# lines below (which are the defaults).  For example:
-#    XkbModel    "type6"
-# If you have a SUN keyboard, you may use:
-#    XkbModel    "sun"
-#
-# Then to change the language, change the Layout setting.
-# For example, a german layout can be obtained with:
-#    XkbLayout   "de"
-# or:
-#    XkbLayout   "de"
-#    XkbVariant  "nodeadkeys"
-#
-# If you\'d like to switch the positions of your capslock and
-# control keys, use:
-#    XkbOptions  "ctrl:swapcaps"
-
-# These are the default XKB settings for XFree86 on SUN:
-#    XkbRules    "sun"
-#    XkbModel    "type5_unix"
-#    XkbLayout   "us"
-#    XkbCompat   "compat/complete"
-#    XkbTypes    "types/complete"
-#    XkbKeycodes "sun(type5)"
-#    XkbGeometry "sun(type5)"
-#    XkbSymbols  "sun/us(sun5)"
-
-    XkbRules    "sun"
-    XkbLayout   "us"
-    XkbCompat   "compat/complete"
-    XkbTypes    "types/complete"
-    XkbKeycodes "sun(type5)"
-    XkbGeometry "sun(type5)"
-    XkbSymbols  "sun/us(sun5)"
-';
-$keyboardsection_part3_v4 = '
-    Option "XkbRules"    "sun"
-    Option "XkbLayout"   "us"
-    Option "XkbCompat"   "compat/complete"
-    Option "XkbTypes"    "types/complete"
-    Option "XkbKeycodes" "sun(type5)"
-    Option "XkbGeometry" "sun(type5)"
-    Option "XkbSymbols"  "sun/us(sun5)"
-';
-} else {
-$keyboardsection_part3 = '
-# To customise the XKB settings to suit your keyboard, modify the
-# lines below (which are the defaults).  For example, for a non-U.S.
-# keyboard, you will probably want to use:
-#    XkbModel    "pc102"
-# If you have a US Microsoft Natural keyboard, you can use:
-#    XkbModel    "microsoft"
-#
-# Then to change the language, change the Layout setting.
-# For example, a german layout can be obtained with:
-#    XkbLayout   "de"
-# or:
-#    XkbLayout   "de"
-#    XkbVariant  "nodeadkeys"
-#
-# If you\'d like to switch the positions of your capslock and
-# control keys, use:
-#    XkbOptions  "ctrl:swapcaps"
-
-# These are the default XKB settings for XFree86
-#    XkbRules    "xfree86"
-#    XkbModel    "pc101"
-#    XkbLayout   "us"
-#    XkbVariant  ""
-#    XkbOptions  ""
-
-    XkbKeycodes     "xfree86"
-    XkbTypes        "default"
-    XkbCompat       "default"
-    XkbSymbols      "us(pc105)"
-    XkbGeometry     "pc"
-    XkbRules        "xfree86"
-';
-
-$keyboardsection_part3_v4 = '
-    Option "XkbRules" "xfree86"
-';
-}
-
-$keyboardsection_end = '
-EndSection
-';
-
-$pointersection_text = '
-# **********************************************************************
-# Pointer section
-# **********************************************************************
-
-';
-
-$monitorsection_text1 = '
-# **********************************************************************
-# Monitor section
-# **********************************************************************
-
-# Any number of monitor sections may be present
-
-Section "Monitor"
-';
-
-$monitorsection_text2 = '
-# HorizSync is in kHz unless units are specified.
-# HorizSync may be a comma separated list of discrete values, or a
-# comma separated list of ranges of values.
-# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR\'S
-# USER MANUAL FOR THE CORRECT NUMBERS.
-';
-
-$monitorsection_text3 = '
-# VertRefresh is in Hz unless units are specified.
-# VertRefresh may be a comma separated list of discrete values, or a
-# comma separated list of ranges of values.
-# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR\'S
-# USER MANUAL FOR THE CORRECT NUMBERS.
-';
-
-$monitorsection_text4 = '
-# Modes can be specified in two formats.  A compact one-line format, or
-# a multi-line format.
-
-# These two are equivalent
-
-#    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
-
-#    Mode "1024x768i"
-#        DotClock	45
-#        HTimings	1024 1048 1208 1264
-#        VTimings	768 776 784 817
-#        Flags		"Interlace"
-#    EndMode
-';
-
-$modelines_text_Trident_TG_96xx = '
-# This is a set of standard mode timings. Modes that are out of monitor spec
-# are automatically deleted by the server (provided the HorizSync and
-# VertRefresh lines are correct), so there\'s no immediate need to
-# delete mode timings (unless particular mode timings don\'t work on your
-# monitor). With these modes, the best standard mode that your monitor
-# and video card can support for a given resolution is automatically
-# used.
-
-# These are special modelines for Trident Providia 9685. It is for VA Linux
-# systems only.
-# 640x480 @ 72 Hz, 36.5 kHz hsync
-Modeline "640x480"     31.5   640  680  720  864   480  488  491  521
-# 800x600 @ 72 Hz, 48.0 kHz hsync
-Modeline "800x600"     50     800  856  976 1040   600  637  643  666 +hsync +vsync
-# 1024x768 @ 60 Hz, 48.4 kHz hsync
-#Modeline "1024x768"    65    1024 1032 1176 1344   768  771  777  806 -hsync -vsync
-# 1024x768 @ 70 Hz, 56.5 kHz hsync
-Modeline "1024x768"    75    1024 1048 1184 1328   768  771  777  806 -hsync -vsync
-';
-$modelines_text_ext = '
-# This is a set of extended mode timings typically used for laptop,
-# TV fullscreen mode or DVD fullscreen output.
-# These are available along with standard mode timings.
-
-# Sony Vaio C1(X,XS,VE,VN)?
-# 1024x480 @ 85.6 Hz, 48 kHz hsync
-ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hsync -vsync
-
-# 768x576 @ 79 Hz, 50 kHz hsync
-ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
-# 768x576 @ 100 Hz, 61.6 kHz hsync
-ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
-
-';
-$modelines_text_apple = '
-Section "Modes"
-    Identifier "Mac Modes"    
-    # Apple iMac modes
-    Modeline "1024x768"   78.525 1024 1049 1145 1312   768  769  772  800 +hsync +vsync
-    Modeline "800x600"    62.357  800  821  901 1040   600  601  604  632 +hsync +vsync
-    Modeline "640x480"    49.886  640  661  725  832   480  481  484  514 +hsync +vsync
-    # Apple monitors tend to do 832x624
-    Modeline "832x624"    57      832  876  940 1152   624  625  628  667 -hsync -vsync
-    # Apple PowerBook G3
-    Modeline "800x600"    100     800  816  824  840   600  616  624  640 -hsync -vsync
-    # Apple TI Powerbook 
-    Modeline "1152x768"   78.741 1152 1173 1269 1440   768  769  772  800 +vsync +vsync
-    # Pismo Firewire G3   
-    Modeline "1024x768"   65     1024 1032 1176 1344   768  771  777  806 -hsync -vsync
-    # iBook2
-    Modeline "1024x768"   65     1024 1048 1184 1344   768  771  777  806 -hsync -vsync
-    # HiRes Apple Studio Display
-    Modeline "1280x1024"  135    1280 1288 1392 1664  1024 1027 1030 1064
-EndSection
-';
-$modelines_text = '
-# This is a set of standard mode timings. Modes that are out of monitor spec
-# are automatically deleted by the server (provided the HorizSync and
-# VertRefresh lines are correct), so there\'s no immediate need to
-# delete mode timings (unless particular mode timings don\'t work on your
-# monitor). With these modes, the best standard mode that your monitor
-# and video card can support for a given resolution is automatically
-# used.
-
-# 640x400 @ 70 Hz, 31.5 kHz hsync
-Modeline "640x400"     25.175 640  664  760  800   400  409  411  450
-# 640x480 @ 60 Hz, 31.5 kHz hsync
-Modeline "640x480"     25.175 640  664  760  800   480  491  493  525
-# 800x600 @ 56 Hz, 35.15 kHz hsync
-ModeLine "800x600"     36     800  824  896 1024   600  601  603  625
-# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
-Modeline "1024x768"    44.9  1024 1048 1208 1264   768  776  784  817 Interlace
-
-# 640x400 @ 85 Hz, 37.86 kHz hsync
-Modeline "640x400"     31.5   640  672 736   832   400  401  404  445 -HSync +VSync
-# 640x480 @ 72 Hz, 36.5 kHz hsync
-Modeline "640x480"     31.5   640  680  720  864   480  488  491  521
-# 640x480 @ 75 Hz, 37.50 kHz hsync
-ModeLine  "640x480"    31.5   640  656  720  840   480  481  484  500 -HSync -VSync
-# 800x600 @ 60 Hz, 37.8 kHz hsync
-Modeline "800x600"     40     800  840  968 1056   600  601  605  628 +hsync +vsync
-
-# 640x480 @ 85 Hz, 43.27 kHz hsync
-Modeline "640x480"     36     640  696  752  832   480  481  484  509 -HSync -VSync
-# 1152x864 @ 89 Hz interlaced, 44 kHz hsync
-ModeLine "1152x864"    65    1152 1168 1384 1480   864  865  875  985 Interlace
-
-# 800x600 @ 72 Hz, 48.0 kHz hsync
-Modeline "800x600"     50     800  856  976 1040   600  637  643  666 +hsync +vsync
-# 1024x768 @ 60 Hz, 48.4 kHz hsync
-Modeline "1024x768"    65    1024 1032 1176 1344   768  771  777  806 -hsync -vsync
-
-# 640x480 @ 100 Hz, 53.01 kHz hsync
-Modeline "640x480"     45.8   640  672  768  864   480  488  494  530 -HSync -VSync
-# 1152x864 @ 60 Hz, 53.5 kHz hsync
-Modeline  "1152x864"   89.9  1152 1216 1472 1680   864  868  876  892 -HSync -VSync
-# 800x600 @ 85 Hz, 55.84 kHz hsync
-Modeline  "800x600"    60.75  800  864  928 1088   600  616  621  657 -HSync -VSync
-
-# 1024x768 @ 70 Hz, 56.5 kHz hsync
-Modeline "1024x768"    75    1024 1048 1184 1328   768  771  777  806 -hsync -vsync
-# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
-Modeline "1280x1024"   80    1280 1296 1512 1568  1024 1025 1037 1165 Interlace
-
-# 800x600 @ 100 Hz, 64.02 kHz hsync
-Modeline  "800x600"    69.65  800  864  928 1088   600  604  610  640 -HSync -VSync
-# 1024x768 @ 76 Hz, 62.5 kHz hsync
-Modeline "1024x768"    85    1024 1032 1152 1360   768  784  787  823
-# 1152x864 @ 70 Hz, 62.4 kHz hsync
-Modeline  "1152x864"   92    1152 1208 1368 1474   864  865  875  895
-# 1280x1024 @ 61 Hz, 64.2 kHz hsync
-Modeline "1280x1024"  110    1280 1328 1512 1712  1024 1025 1028 1054
-# 1400x1050 @ 60 Hz, 65.5 kHz
-ModeLine "1400x1050" 122.0 1400 1488 1640 1880   1050 1052 1064 1082 +HSync +VSync
-
-# 1024x768 @ 85 Hz, 70.24 kHz hsync
-Modeline "1024x768"   98.9  1024 1056 1216 1408   768 782 788 822 -HSync -VSync
-# 1152x864 @ 78 Hz, 70.8 kHz hsync
-Modeline "1152x864"   110   1152 1240 1324 1552   864  864  876  908
-
-# 1280x1024 @ 70 Hz, 74.59 kHz hsync
-Modeline "1280x1024"  126.5 1280 1312 1472 1696  1024 1032 1040 1068 -HSync -VSync
-# 1600x1200 @ 60Hz, 75.00 kHz hsync
-Modeline "1600x1200"  162   1600 1664 1856 2160  1200 1201 1204 1250 +HSync +VSync
-# 1152x864 @ 84 Hz, 76.0 kHz hsync
-Modeline "1152x864"   135    1152 1464 1592 1776   864  864  876  908
-
-# 1280x1024 @ 74 Hz, 78.85 kHz hsync
-Modeline "1280x1024"  135    1280 1312 1456 1712  1024 1027 1030 1064
-
-# 1024x768 @ 100Hz, 80.21 kHz hsync
-Modeline "1024x768"   115.5  1024 1056 1248 1440  768  771  781  802 -HSync -VSync
-# 1280x1024 @ 76 Hz, 81.13 kHz hsync
-Modeline "1280x1024"  135    1280 1312 1416 1664  1024 1027 1030 1064
-# 1400x1050 @ 75 Hz, 82.2 kHz hsync
-ModeLine "1400x1050" 155.8   1400 1464 1784 1912  1050 1052 1064 1090 +HSync +VSync
-
-# 1600x1200 @ 70 Hz, 87.50 kHz hsync
-Modeline "1600x1200"  189    1600 1664 1856 2160  1200 1201 1204 1250 -HSync -VSync
-# 1152x864 @ 100 Hz, 89.62 kHz hsync
-Modeline "1152x864"   137.65 1152 1184 1312 1536   864  866  885  902 -HSync -VSync
-# 1280x1024 @ 85 Hz, 91.15 kHz hsync
-Modeline "1280x1024"  157.5  1280 1344 1504 1728  1024 1025 1028 1072 +HSync +VSync
-# 1600x1200 @ 75 Hz, 93.75 kHz hsync
-Modeline "1600x1200"  202.5  1600 1664 1856 2160  1200 1201 1204 1250 +HSync +VSync
-# 1600x1200 @ 85 Hz, 105.77 kHz hsync
-Modeline "1600x1200"  220    1600 1616 1808 2080  1200 1204 1207 1244 +HSync +VSync
-# 1600x1200 @ 85 Hz, 106.3 kHz hsync
-ModeLine "1600x1200" 229.5   1600 1664 1856 2160  1200 1201 1204 1250 +HSync +VSync
-# 1280x1024 @ 100 Hz, 107.16 kHz hsync
-Modeline "1280x1024"  181.75 1280 1312 1440 1696  1024 1031 1046 1072 -HSync -VSync
-
-# 1800x1440 @ 64Hz, 96.15 kHz hsync
-ModeLine "1800X1440"  230    1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
-# 1800x1440 @ 70Hz, 104.52 kHz hsync
-ModeLine "1800X1440"  250    1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
-
-# 1920x1440 @ 60 Hz, 90.0 kHz hsync
-ModeLine "1920x1440"  234.0  1920 2048 2256 2600 1440 1441 1444 1500 -HSync +VSync
-# 1920x1440 @ 75 Hz, 112.5kHz hsync
-ModeLine "1920x1440"  297.0  1920 2064 2288 2640 1440 1441 1444 1500 -HSync +VSync
-
-# 512x384 @ 78 Hz, 31.50 kHz hsync
-Modeline "512x384"    20.160 512  528  592  640   384  385  388  404 -HSync -VSync
-# 512x384 @ 85 Hz, 34.38 kHz hsync
-Modeline "512x384"    22     512  528  592  640   384  385  388  404 -HSync -VSync
-
-
-# Low-res Doublescan modes
-# If your chipset does not support doublescan, you get a \'squashed\'
-# resolution like 320x400.
-
-# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
-Modeline "320x200"     12.588 320  336  384  400   200  204  205  225 Doublescan
-# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
-Modeline "320x240"     12.588 320  336  384  400   240  245  246  262 Doublescan
-# 320x240 @ 72 Hz, 36.5 kHz hsync
-Modeline "320x240"     15.750 320  336  384  400   240  244  246  262 Doublescan
-# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
-ModeLine "400x300"     18     400  416  448  512   300  301  302  312 Doublescan
-# 400x300 @ 60 Hz, 37.8 kHz hsync
-Modeline "400x300"     20     400  416  480  528   300  301  303  314 Doublescan
-# 400x300 @ 72 Hz, 48.0 kHz hsync
-Modeline "400x300"     25     400  424  488  520   300  319  322  333 Doublescan
-# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
-ModeLine "480x300"     21.656 480  496  536  616   300  301  302  312 Doublescan
-# 480x300 @ 60 Hz, 37.8 kHz hsync
-Modeline "480x300"     23.890 480  496  576  632   300  301  303  314 Doublescan
-# 480x300 @ 63 Hz, 39.6 kHz hsync
-Modeline "480x300"     25     480  496  576  632   300  301  303  314 Doublescan
-# 480x300 @ 72 Hz, 48.0 kHz hsync
-Modeline "480x300"     29.952 480  504  584  624   300  319  322  333 Doublescan
-
-';
-
-$devicesection_text = '
-# **********************************************************************
-# Graphics device section
-# **********************************************************************
-
-Section "Device"
-    Identifier "Generic VGA"
-    Chipset   "generic"
-EndSection
-
-';
-
-$devicesection_text_v4 = '
-# **********************************************************************
-# Graphics device section
-# **********************************************************************
-
-Section "Device"
-    Identifier "Generic VGA"
-    Driver     "vga"
-EndSection
-
-';
-
-$screensection_text1 = '
-# **********************************************************************
-# Screen sections
-# **********************************************************************
-';
-
diff --git a/perl-install/any.pm b/perl-install/any.pm
deleted file mode 100644
index ae73ddbf6..000000000
--- a/perl-install/any.pm
+++ /dev/null
@@ -1,866 +0,0 @@
-package any; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use detect_devices;
-use partition_table qw(:types);
-use fsedit;
-use fs;
-use lang;
-use run_program;
-use modules;
-use log;
-
-sub drakx_version { 
-    sprintf "DrakX v%s built %s", $::testing ? ('TEST', scalar gmtime()) : (split('/', cat_("$ENV{SHARE_PATH}/VERSION")))[2,3];
-}
-
-sub facesdir {
-    my ($prefix) = @_;
-    "$prefix/usr/share/mdk/faces/";
-}
-sub face2png {
-    my ($face, $prefix) = @_;
-    facesdir($prefix) . $face . ".png";
-}
-sub facesnames {
-    my ($prefix) = @_;
-    my $dir = facesdir($prefix);
-    my @l = grep { /^[A-Z]/ } all($dir);
-    map { if_(/(.*)\.png/, $1) } (@l ? @l : all($dir));
-}
-
-sub addKdmIcon {
-    my ($prefix, $user, $icon) = @_;
-    my $dest = "$prefix/usr/share/faces/$user.png";
-    eval { cp_af(facesdir($prefix) . $icon . ".png", $dest) } if $icon;
-}
-
-sub allocUsers {
-    my ($prefix, $users) = @_;
-    my @m = my @l = facesnames($prefix);
-    foreach (grep { !$_->{icon} || $_->{icon} eq "automagic" } @$users) {
-	$_->{auto_icon} = splice(@m, rand(@m), 1); #- known biased (see cookbook for better)
-	log::l("auto_icon is $_->{auto_icon}");
-	@m = @l unless @m;
-    }
-}
-
-sub addUsers {
-    my ($prefix, $users) = @_;
-    my $msec = "$prefix/etc/security/msec";
-
-    allocUsers($prefix, $users);
-    foreach my $u (@$users) {
-	substInFile { s/^$u->{name}\n//; $_ .= "$u->{name}\n" if eof } "$msec/user.conf" if -d $msec;
-	addKdmIcon($prefix, $u->{name}, delete $u->{auto_icon} || $u->{icon});
-    }
-    run_program::rooted($prefix, "/usr/share/msec/grpuser.sh --refresh >/dev/null");
-}
-
-sub crypt {
-    my ($password, $md5) = @_;
-    crypt($password, $md5 ? '$1$' . salt(8) : salt(2));
-}
-sub enableShadow {
-    my ($prefix) = @_;
-    run_program::rooted($prefix, "pwconv")  or log::l("pwconv failed");
-    run_program::rooted($prefix, "grpconv") or log::l("grpconv failed");
-}
-sub enableMD5Shadow { #- NO MORE USED
-    my ($prefix, $shadow, $md5) = @_;
-    substInFile {
-	if (/^password.*pam_pwdb.so/) {
-	    s/\s*shadow//; s/\s*md5//;
-	    s/$/ shadow/ if $shadow;
-	    s/$/ md5/ if $md5;
-	}
-    } grep { -r $_ } map { "$prefix/etc/pam.d/$_" } qw(login rlogin passwd);
-}
-
-sub setupBootloader {
-    my ($in, $b, $all_hds, $fstab, $security, $prefix, $more) = @_;
-    my $hds = $all_hds->{hds};
-
-    $more++ if $b->{bootUnsafe};
-    my $automatic = !$::expert && $more < 1;
-    my $semi_auto = !$::expert && arch() !~ /ia64/;
-    my $ask_per_entries = $::expert || $more > 1;
-    $automatic = 0 if arch() =~ /ppc/; #- no auto for PPC yet
-    if ((grep { $_->{device} =~ /^sd/ } @$hds) && (grep { $_->{device} =~ /^hd/ } @$hds)) {
-	$automatic = $semi_auto = 0;
-	#- full expert questions when there is 2 kind of disks
-	#- it would need a semi_auto asking on which drive the bios boots...
-    }
-	
-    if ($automatic) {
-	#- automatic
-    } elsif ($semi_auto) {
-	my @l = (__("First sector of drive (MBR)"), __("First sector of boot partition"));
-
-	$in->set_help('setupBootloaderBeginner') unless $::isStandalone;
-	if (arch() =~ /sparc/) {
-	    $b->{use_partition} = $in->ask_from_list_(_("SILO Installation"),
-						      _("Where do you want to install the bootloader?"),
-						      \@l, $l[$b->{use_partition}]) or return;
-	} elsif (arch() =~ /ppc/) {
-		if (defined $partition_table_mac::bootstrap_part) {
-			$b->{boot} = $partition_table_mac::bootstrap_part;
-			log::l("set bootstrap to $b->{boot}"); 
-		} else {
-			die "no bootstrap partition - yaboot.conf creation failed";
-		}
-	} else {
-	    my $boot = $hds->[0]{device};
-	    my $onmbr = "/dev/$boot" eq $b->{boot};
-	    $b->{boot} = "/dev/" . ($in->ask_from_list_(_("LILO/grub Installation"),
-							_("Where do you want to install the bootloader?"),
-							\@l, $l[!$onmbr]) eq $l[0] 
-				    ? $boot : fsedit::get_root($fstab, 'boot')->{device});
-	}
-    } else {
-	$in->set_help(arch() =~ /sparc/ ? "setupSILOGeneral" :  arch() =~ /ppc/ ? 'setupYabootGeneral' :"setupBootloaderGeneral") unless $::isStandalone; #- TO MERGE ?
-
-	my @silo_install_lang = (_("First sector of drive (MBR)"), _("First sector of boot partition"));
-	my $silo_install_lang = $silo_install_lang[$b->{use_partition}];
-
-	my %bootloaders = (if_(exists $b->{methods}{silo},
-			       __("SILO")                     => sub { $b->{methods}{silo} = 1 }),
-			   if_(exists $b->{methods}{lilo},
-			       __("LILO with text menu")      => sub { $b->{methods}{lilo} = "lilo-menu" },
-			       __("LILO with graphical menu") => sub { $b->{methods}{lilo} = "lilo-graphic" }),
-			   if_(exists $b->{methods}{grub},
-			       #- put lilo if grub is chosen, so that /etc/lilo.conf is generated
-			       __("Grub")                     => sub { $b->{methods}{grub} = 1;
-								       exists $b->{methods}{lilo}
-									 and $b->{methods}{lilo} = "lilo-menu" }),
-			   if_(exists $b->{methods}{loadlin},
-			       __("Boot from DOS/Windows (loadlin)") => sub { $b->{methods}{loadlin} = 1 }),
-			   if_(exists $b->{methods}{yaboot},
-			       __("Yaboot") => sub { $b->{methods}{yaboot} = 1 }),
-			  );
-	my $bootloader = arch() =~ /sparc/ ? __("SILO") : arch() =~ /ppc/ ? __("Yaboot") : __("LILO with graphical menu");
-	my $profiles = bootloader::has_profiles($b);
-	my $memsize = bootloader::get_append($b, 'mem');
-
-	$b->{vga} ||= 'Normal';
-	if (arch !~ /ppc/) {
-	$in->ask_from('', _("Bootloader main options"), [
-{ label => _("Bootloader to use"), val => \$bootloader, list => [ keys(%bootloaders) ], format => \&translate },
-    arch() =~ /sparc/ ? (
-{ label => _("Bootloader installation"), val => \$silo_install_lang, list => \@silo_install_lang },
-) : if_(arch() !~ /ia64/,
-{ label => _("Boot device"), val => \$b->{boot}, list => [ map { "/dev/$_" } (map { $_->{device} } (@$hds, grep { !isFat($_) } @$fstab)), detect_devices::floppies_dev() ], not_edit => !$::expert },
-{ label => _("LBA (doesn't work on old BIOSes)"), val => \$b->{lba32}, type => "bool", text => "lba", advanced => 1 },
-{ label => _("Compact"), val => \$b->{compact}, type => "bool", text => _("compact"), advanced => 1 },
-{ label => _("Video mode"), val => \$b->{vga}, list => [ keys %bootloader::vga_modes ], not_edit => !$::expert, advanced => 1 },
-),
-{ label => _("Delay before booting default image"), val => \$b->{timeout} },
-    if_($security >= 4,
-{ label => _("Password"), val => \$b->{password}, hidden => 1 },
-{ label => _("Password (again)"), val => \$b->{password2}, hidden => 1 },
-{ label => _("Restrict command line options"), val => \$b->{restricted}, type => "bool", text => _("restrict") },
-    ),
-{ label => _("Clean /tmp at each boot"), val => \$b->{CLEAN_TMP}, type => 'bool', advanced => 1 },
-{ label => _("Precise RAM size if needed (found %d MB)", availableRamMB()), val => \$memsize, advanced => 1 },
-    if_(detect_devices::isLaptop,
-{ label => _("Enable multi profiles"), val => \$profiles, type => 'bool', advanced => 1 },
-    ),
-],
-				 complete => sub {
-				     !$memsize || $memsize =~ /K$/ || $memsize =~ s/^(\d+)M?$/$1M/i or $in->ask_warn('', _("Give the ram size in MB")), return 1;
-#-				     $security > 4 && length($b->{password}) < 6 and $in->ask_warn('', _("At this level of security, a password (and a good one) in lilo is requested")), return 1;
-				     $b->{restricted} && !$b->{password} and $in->ask_warn('', _("Option ``Restrict command line options'' is of no use without a password")), return 1;
-				     $b->{password} eq $b->{password2} or !$b->{restricted} or $in->ask_warn('', [ _("The passwords do not match"), _("Please try again") ]), return 1;
-				     0;
-				 }
-				) or return 0;
-	} else {
-	$b->{boot} = $partition_table_mac::bootstrap_part;	
-	$in->ask_from('', _("Bootloader main options"), [
-	{ label => _("Bootloader to use"), val => \$bootloader, list => [ keys(%bootloaders) ], format => \&translate },	
-	{ label => _("Init Message"), val => \$b->{initmsg} },
-	{ label => _("Boot device"), val => \$b->{boot}, list => [ map { "/dev/$_" } (map { $_->{device} } (grep { isAppleBootstrap($_) } @$fstab))], not_edit => !$::expert },
-	{ label => _("Open Firmware Delay"), val => \$b->{delay} },
-	{ label => _("Kernel Boot Timeout"), val => \$b->{timeout} },
-	{ label => _("Enable CD Boot?"), val => \$b->{enablecdboot}, type => "bool" },
-	{ label => _("Enable OF Boot?"), val => \$b->{enableofboot}, type => "bool" },
-	{ label => _("Default OS?"), val=> \$b->{defaultos}, list => [ 'linux', 'macos', 'macosx', 'darwin' ] },
-	]) or return 0;				
-	}
-	
-	$b->{methods}{$_} = 0 foreach keys %{$b->{methods}};
-	$bootloaders{$bootloader} and $bootloaders{$bootloader}->();
-	#- at least one method
-	grep_each { $::b } %{$b->{methods}} or return;
-
-	$b->{use_partition} = $silo_install_lang eq _("First sector of drive (MBR)") ? 0 : 1;
-	$b->{vga} = $bootloader::vga_modes{$b->{vga}} || $b->{vga};
-
-	bootloader::set_profiles($b, $profiles);
-	bootloader::add_append($b, "mem", $memsize);
-    }
-
-    $ask_per_entries or last;
-
-    while (1) {
-	$in->set_help(arch() =~ /sparc/ ? 'setupSILOAddEntry' : arch() =~ /ppc/ ? 'setupYabootAddEntry' : 'setupBootloaderAddEntry') unless $::isStandalone;
-	my ($c, $e);
-	$in->ask_from_( 
-		{
-		 messages => 
-_("Here are the different entries.
-You can add some more or change the existing ones."),
-		 ok => '',
-},
-		[ { val => \$e, format => sub {
-		    my ($e) = @_;
-		    ref $e ? 
-		      "$e->{label} ($e->{kernel_or_dev})" . ($b->{default} eq $e->{label} && "  *") : 
-		      translate($e);
-		}, list => [ @{$b->{entries}} ] },
-		  (map { my $s = $_; { val => translate($_), clicked_may_quit => sub { $c = $s; 1 } } } (__("Modify"), __("Add"), __("Done"))),
-		]
-	);
-	!$c || $c eq "Done" and last;
-
-	if ($c eq "Add") {
-	    my @labels = map { $_->{label} } @{$b->{entries}};
-	    my $prefix;
-	    if ($in->ask_from_list_('', _("Which type of entry do you want to add?"),
-				    [ __("Linux"), arch() =~ /sparc/ ? __("Other OS (SunOS...)") : arch() =~ /ppc/ ? 
-				   __("Other OS (MacOS...)") : __("Other OS (windows...)") ]
-				   ) eq "Linux") {
-		$e = { type => 'image',
-		       root => '/dev/' . fsedit::get_root($fstab)->{device}, #- assume a good default.
-		     };
-		$prefix = "linux";
-	    } else {
-		$e = { type => 'other' };
-		$prefix = arch() =~ /sparc/ ? "sunos" : arch() =~ /ppc/ ? "macos" : "windows";;
-	    }
-	    $e->{label} = $prefix;
-	    for (my $nb = 0; member($e->{label}, @labels); $nb++) { $e->{label} = "$prefix-$nb" }
-	}
-	my %old_e = %$e;
-	my $default = my $old_default = $e->{label} eq $b->{default};
-
-	my @l;
-	if ($e->{type} eq "image") { 
-	    @l = (
-{ label => _("Image"), val => \$e->{kernel_or_dev}, list => [ map { s/$prefix//; $_ } glob_("$prefix/boot/vmlinuz*") ], not_edit => 0 },
-{ label => _("Root"), val => \$e->{root}, list => [ map { "/dev/$_->{device}" } @$fstab ], not_edit => !$::expert },
-{ label => _("Append"), val => \$e->{append} },
-  if_(arch !~ /ppc|ia64/,
-{ label => _("Video mode"), val => \$e->{vga}, list => [ keys %bootloader::vga_modes ], not_edit => !$::expert },
-),
-{ label => _("Initrd"), val => \$e->{initrd}, list => [ map { s/$prefix//; $_ } glob_("$prefix/boot/initrd*") ] },
-{ label => _("Read-write"), val => \$e->{'read-write'}, type => 'bool' }
-	    );
-	    @l = @l[0..2] unless $::expert;
-	} else {
-	    @l = ( 
-{ label => _("Root"), val => \$e->{kernel_or_dev}, list => [ map { "/dev/$_->{device}" } @$fstab ], not_edit => !$::expert },
-if_(arch() !~ /sparc|ppc|ia64/,
-{ label => _("Table"), val => \$e->{table}, list => [ '', map { "/dev/$_->{device}" } @$hds ], not_edit => !$::expert },
-{ label => _("Unsafe"), val => \$e->{unsafe}, type => 'bool' }
-),
-	    );
-	    @l = $l[0] unless $::expert;
-	}
-if (arch() !~ /ppc/) {
-	@l = (
-{ label => _("Label"), val => \$e->{label} },
-@l,
-{ label => _("Default"), val => \$default, type => 'bool' },
-	);
-} else {
-	@l = ({ label => _("Label"), val => \$e->{label}, list=> ['macos', 'macosx', 'darwin'] },
-	@l );
-	if ($e->{type} eq "image") {
-		@l = ({ label => _("Label"), val => \$e->{label} },
-		$::expert ? @l[1..4] : (@l[1..2], { label => _("Append"), val => \$e->{append} }) ,
-		if_($::expert, { label => _("Initrd-size"), val => \$e->{initrdsize}, list => [ '', '4096', '8192', '16384', '24576' ] }),
-		if_($::expert, $l[5]),
-		{ label => _("NoVideo"), val => \$e->{novideo}, type => 'bool' },
-		{ label => _("Default"), val => \$default, type => 'bool' }
-		);
-	}
-}
-
-	if ($in->ask_from_(
-	    { 
-	     if_($c ne "Add", cancel => _("Remove entry")),
-	     callbacks => {
-	       complete => sub {
-		   $e->{label} or $in->ask_warn('', _("Empty label not allowed")), return 1;
-		   member($e->{label}, map { $_->{label} } grep { $_ != $e } @{$b->{entries}}) and $in->ask_warn('', _("This label is already used")), return 1;
-		   0;
-	       } } }, \@l)) {
-	    $b->{default} = $old_default || $default ? $default && $e->{label} : $b->{default};
-	    $e->{vga} = $bootloader::vga_modes{$e->{vga}} || $e->{vga};
-	    require bootloader;
-	    bootloader::configure_entry($prefix, $e); #- hack to make sure initrd file are built.
-
-	    push @{$b->{entries}}, $e if $c eq "Add";
-	} else {
-	    @{$b->{entries}} = grep { $_ != $e } @{$b->{entries}};
-	}
-    }
-    1;
-}
-
-my @etc_pass_fields = qw(name pw uid gid realname home shell);
-sub unpack_passwd {
-    my ($l) = @_;
-    my %l; @l{@etc_pass_fields} = split ':', chomp_($l);
-    \%l;
-}
-sub pack_passwd {
-    my ($l) = @_;
-    join(':', @$l{@etc_pass_fields}) . "\n";
-}
-
-sub get_autologin {
-    my ($prefix, $o) = @_;
-    my %l = getVarsFromSh("$prefix/etc/sysconfig/autologin");
-    $o->{autologin} ||= $l{USER};
-    %l = getVarsFromSh("$prefix/etc/sysconfig/desktop");
-    $o->{desktop} ||= $l{DESKTOP};
-}
-
-sub set_autologin {
-  my ($prefix, $user, $desktop) = @_;
-
-  if ($user) {
-      my %l = getVarsFromSh("$prefix/etc/sysconfig/desktop");
-      $l{DESKTOP} = $desktop;
-      setVarsInSh("$prefix/etc/sysconfig/desktop", \%l);
-      log::l("cat $prefix/etc/sysconfig/desktop ($desktop):\n", cat_("$prefix/etc/sysconfig/desktop"));
-  }
-  setVarsInSh("$prefix/etc/sysconfig/autologin",
-	      { USER => $user, AUTOLOGIN => bool2yesno($user), EXEC => "/usr/X11R6/bin/startx" });
-  log::l("cat $prefix/etc/sysconfig/autologin ($user):\n", cat_("$prefix/etc/sysconfig/autologin"));
-}
-
-sub rotate_log {
-    my ($f) = @_;
-    if (-e $f) {
-	my $i = 1;
-	for (; -e "$f$i" || -e "$f$i.gz"; $i++) {}
-	rename $f, "$f$i";
-    }
-}
-sub rotate_logs {
-    my ($prefix) = @_;
-    rotate_log("$prefix/root/$_") foreach qw(ddebug.log install.log);
-}
-
-sub writeandclean_ldsoconf {
-    my ($prefix) = @_;
-    my $file = "$prefix/etc/ld.so.conf";
-    output $file,
-      grep { !m|^(/usr)?/lib$| } #- no need to have /lib and /usr/lib in ld.so.conf
-	uniq cat_($file), "/usr/X11R6/lib\n";
-}
-
-sub shells {
-    my ($prefix) = @_;
-    grep { -x "$prefix$_" } chomp_(cat_("$prefix/etc/shells"));
-}
-
-sub inspect {
-    my ($part, $prefix, $rw) = @_;
-
-    isMountableRW($part) or return;
-
-    my $dir = $::isInstall ? "/tmp/inspect_tmp_dir" : "/root/.inspect_tmp_dir";
-
-    if ($part->{isMounted}) {
-	$dir = ($prefix || '') . $part->{mntpoint};
-    } elsif ($part->{notFormatted} && !$part->{isFormatted}) {
-	$dir = '';
-    } else {
-	mkdir $dir, 0700;
-	eval { fs::mount($part->{device}, $dir, type2fs($part), !$rw) };
-	$@ and return;
-    }
-    my $h = before_leaving {
-	if (!$part->{isMounted} && $dir) {
-	    fs::umount($dir);
-	    unlink($dir)
-	}
-    };
-    $h->{dir} = $dir;
-    $h;
-}
-
-#-----modem conf
-sub pppConfig {
-    my ($in, $modem, $prefix) = @_;
-    $modem or return;
-
-    if ($modem->{device} ne "/dev/modem") {
-	devfssymlinkf($modem->{device}, 'modem', $prefix) or log::l("creation of $prefix/dev/modem failed")
-    }
-    $in->do_pkgs->install('ppp') if !$::testing;
-
-    my %toreplace;
-    $toreplace{$_} = $modem->{$_} foreach qw(connection phone login passwd auth domain dns1 dns2);
-    $toreplace{kpppauth} = ${{ 'Script-based' => 0, 'PAP' => 1, 'Terminal-based' => 2, }}{$modem->{auth}};
-    $toreplace{kpppauth} = ${{ 'Script-based' => 0, 'PAP' => 1, 'Terminal-based' => 2, 'CHAP' => 3 }}{$modem->{auth}};
-    $toreplace{phone} =~ s/\D//g;
-    $toreplace{dnsserver} = join ',', map { $modem->{$_} } "dns1", "dns2";
-    $toreplace{dnsserver} .= $toreplace{dnsserver} && ',';
-
-    #- using peerdns or dns1,dns2 avoid writing a /etc/resolv.conf file.
-    $toreplace{peerdns} = "yes";
-
-    $toreplace{connection} ||= 'DialupConnection';
-    $toreplace{domain} ||= 'localdomain';
-    $toreplace{intf} ||= 'ppp0';
-    $toreplace{papname} = ($modem->{auth} eq 'PAP' || $modem->{auth} eq 'CHAP') && $toreplace{login};
-
-    #- build ifcfg-ppp0.
-    my $ifcfg = "$prefix/etc/sysconfig/network-scripts/ifcfg-ppp0";
-    local *IFCFG; open IFCFG, ">$ifcfg" or die "Can't open $ifcfg";
-    print IFCFG <<END;
-DEVICE="$toreplace{intf}"
-ONBOOT="no"
-USERCTL="no"
-MODEMPORT="/dev/modem"
-LINESPEED="115200"
-PERSIST="yes"
-DEFABORT="yes"
-DEBUG="yes"
-INITSTRING="ATZ"
-DEFROUTE="yes"
-HARDFLOWCTL="yes"
-ESCAPECHARS="no"
-PPPOPTIONS=""
-PAPNAME="$toreplace{papname}"
-REMIP=""
-NETMASK=""
-IPADDR=""
-MRU=""
-MTU=""
-DISCONNECTTIMEOUT="5"
-RETRYTIMEOUT="60"
-BOOTPROTO="none"
-PEERDNS="$toreplace{peerdns}"
-END
-    foreach (1..2) {
-	if ($toreplace{"dns$_"}) {
-	    print IFCFG <<END;
-DNS$_=$toreplace{"dns$_"}
-END
-	}
-    }
-    close IFCFG;
-
-    #- build chat-ppp0.
-    my $chat = "$prefix/etc/sysconfig/network-scripts/chat-ppp0";
-    local *CHAT; open CHAT, ">$chat" or die "Can't open $chat";
-    print CHAT <<END;
-'ABORT' 'BUSY'
-'ABORT' 'ERROR'
-'ABORT' 'NO CARRIER'
-'ABORT' 'NO DIALTONE'
-'ABORT' 'Invalid Login'
-'ABORT' 'Login incorrect'
-'' 'ATZ'
-END
-    if ($modem->{special_command}) {
-	print CHAT <<END;
-'OK' '$modem->{special_command}'
-END
-    }
-    print CHAT <<END;
-'OK' 'ATDT$toreplace{phone}'
-'CONNECT' ''
-END
-    if ($modem->{auth} eq 'Terminal-based' || $modem->{auth} eq 'Script-based') {
-	print CHAT <<END;
-'ogin:--ogin:' '$toreplace{login}'
-'ord:' '$toreplace{passwd}'
-END
-    }
-    print CHAT <<END;
-'TIMEOUT' '5'
-'~--' ''
-END
-    close CHAT;
-    chmod 0600, $chat;
-
-    if ($modem->{auth} eq 'PAP' || $modem->{auth} eq 'CHAP') {
-	#- need to create a secrets file for the connection.
-	my $secrets = "$prefix/etc/ppp/" . lc($modem->{auth}) . "-secrets";
-	my @l = cat_($secrets);
-	my $replaced = 0;
-	do { $replaced ||= 1
-	       if s/^\s*"?$toreplace{login}"?\s+ppp0\s+(\S+)/"$toreplace{login}"  ppp0  "$toreplace{passwd}"/; } foreach @l;
-	if ($replaced) {
-	    local *F;
-	    open F, ">$secrets" or die "Can't open $secrets: $!";
-	    print F @l;
-        } else {
-	    local *F;
-	    open F, ">>$secrets" or die "Can't open $secrets: $!";
-	    print F "$toreplace{login}  ppp0  \"$toreplace{passwd}\"\n";
-	}
-	#- restore access right to secrets file, just in case.
-	chmod 0600, $secrets;
-    }
-
-    #- install kppprc file according to used configuration.
-    mkdir_p("$prefix/usr/share/config");
-    local *KPPPRC;
-    open KPPPRC, ">$prefix/usr/share/config/kppprc" or die "Can't open $prefix/usr/share/config/kppprc: $!";
-    #chmod 0600, "$prefix/usr/share/config/kppprc";
-    print KPPPRC <<END;
-# KDE Config File
-[Account0]
-ExDNSDisabled=0
-AutoName=0
-ScriptArguments=
-AccountingEnabled=0
-DialString=ATDT
-Phonenumber=$toreplace{phone}
-IPAddr=0.0.0.0
-Domain=$toreplace{domain}
-Name=$toreplace{connection}
-VolumeAccountingEnabled=0
-pppdArguments=
-Password=$toreplace{passwd}
-BeforeDisconnect=
-Command=
-ScriptCommands=
-Authentication=$toreplace{kpppauth}
-DNS=$toreplace{dnsserver}
-SubnetMask=0.0.0.0
-AccountingFile=
-DefaultRoute=1
-Username=$toreplace{login}
-Gateway=0.0.0.0
-StorePassword=1
-DisconnectCommand=
-[Modem]
-BusyWait=0
-Enter=CR
-FlowControl=CRTSCTS
-Volume=0
-Timeout=60
-UseCDLine=0
-UseLockFile=1
-Device=/dev/modem
-Speed=115200
-[Graph]
-InBytes=0,0,255
-Text=0,0,0
-Background=255,255,255
-Enabled=true
-OutBytes=255,0,0
-[General]
-QuitOnDisconnect=0
-ShowLogWindow=0
-DisconnectOnXServerExit=1
-DefaultAccount=$toreplace{connection}
-iconifyOnConnect=1
-Hint_QuickHelp=0
-AutomaticRedial=0
-PPPDebug=0
-NumberOfAccounts=1
-ShowClock=1
-DockIntoPanel=0
-pppdTimeout=30
-END
-
-    miscellaneousNetwork($prefix);
-}
-
-sub miscellaneousNetwork {
-    my ($prefix) = @_;
-    setVarsInSh ("$prefix/etc/profile.d/proxy.sh",  $::o->{miscellaneous}, qw(http_proxy ftp_proxy));
-    setVarsInCsh("$prefix/etc/profile.d/proxy.csh", $::o->{miscellaneous}, qw(http_proxy ftp_proxy));
-}
-
-sub setup_thiskind {
-    my ($in, $type, $auto, $at_least_one) = @_;
-
-    my @l = do {
-	my $w;
-	setup_thiskind_backend ($type, $auto, $at_least_one, sub { $w = wait_load_module($in, $type, @_); } );
-    };
-
-    if (!$::noauto) {
-	if (my @err = grep { $_ } map { $_->{error} } @l) {
-	    $in->ask_warn('', join("\n", @err));
-	}
-	return @l if $auto && (@l || !$at_least_one);
-    }
-    @l = map { $_->{description} } @l;
-    while (1) {
-	(my $msg_type = $type) =~ s/\|.*//;
-	my $msg = @l ?
-	  [ _("Found %s %s interfaces", join(", ", @l), $msg_type),
-	    _("Do you have another one?") ] :
-	  _("Do you have any %s interfaces?", $msg_type);
-
-	my $opt = [ __("Yes"), __("No") ];
-	push @$opt, __("See hardware info") if $::expert;
-	my $r = "Yes";
-	$r = $in->ask_from_list_('', $msg, $opt, "No") || die 'already displayed' unless $at_least_one && @l == 0;
-	if ($r eq "No") { return @l }
-	if ($r eq "Yes") {
-	    push @l, load_module($in, $type) || next;
-	} else {
-	    $in->ask_warn('', [ detect_devices::stringlist() ]);
-	}
-    }
-}
-
-# setup_thiskind_backend : setup the kind of hardware
-# input :
-#  $type : typeof hardware to setup
-#  $auto : automatic behaviour
-#  $at_least_one : 
-# output:
-#  @l : list of loaded
-sub setup_thiskind_backend {
-    my ($type, $auto, $at_least_one, $wait_function) = @_;
-    #- for example $wait_function=sub { $w = wait_load_module($in, $type, @_) }
-
-    my @l;
-    if (!$::noauto) {
-	@l = modules::load_thiskind($type, $wait_function );
-	return @l;# sorry to be a sucker, pixel... :)
-    }
-}
-
-sub wait_load_module {
-    my ($in, $type, $text, $module) = @_;
-#-PO: the first %s is the card type (scsi, network, sound,...)
-#-PO: the second is the vendor+model name
-    $in->wait_message('',
-		     [ _("Installing driver for %s card %s", $type, $text),
-		       if_($::expert, _("(module %s)", $module))
-		     ]);
-}
-
-sub load_module {
-    my ($in, $type) = @_;
-    my @options;
-
-    (my $msg_type = $type) =~ s/\|.*//;
-    my $m = $in->ask_from_listf('',
-#-PO: the %s is the driver type (scsi, network, sound,...)
-			       _("Which %s driver should I try?", $msg_type),
-			       \&modules::module2text,
-			       [ modules::module_of_type($type) ]) or return;
-    my $l = modules::module2text($m);
-    require modparm;
-    my @names = modparm::get_options_name($m);
-
-    if ((@names != 0) && $in->ask_from_list_('',
-_("In some cases, the %s driver needs to have extra information to work
-properly, although it normally works fine without. Would you like to specify
-extra options for it or allow the driver to probe your machine for the
-information it needs? Occasionally, probing will hang a computer, but it should
-not cause any damage.", $l),
-			      [ __("Autoprobe"), __("Specify options") ], "Autoprobe") ne "Autoprobe") {
-      ASK:
-	if (@names >= 0) {
-	    my @l = $in->ask_from_entries('',
-_("You may now provide its options to module %s.", $l),
-					 \@names) or return;
-	    @options = modparm::get_options_result($m, @l);
-	} else {
-	    @options = split ' ',
-	      $in->ask_from_entry('',
-_("You may now provide its options to module %s.
-Options are in format ``name=value name2=value2 ...''.
-For instance, ``io=0x300 irq=7''", $l),
-				 _("Module options:"),
-				);
-	}
-    }
-    eval {
-	my $w = wait_load_module($in, $type, $l, $m);
-	log::l("user asked for loading module $m (type $type, desc $l)");
-	modules::load($m, $type, @options);
-    };
-    if ($@) {
-	$in->ask_yesorno('',
-_("Loading module %s failed.
-Do you want to try again with other parameters?", $l), 1) or return;
-	goto ASK;
-    }
-    $l;
-}
-
-sub ask_users {
-    my ($prefix, $in, $users, $security) = @_;
-
-    my $u if 0; $u ||= {};
-
-    my @shells = map { chomp; $_ } cat_("$prefix/etc/shells");
-    my @icons = facesnames($prefix);
-
-    while (1) {
-	$u->{password2} ||= $u->{password} ||= '';
-	$u->{shell} ||= '/bin/bash';
-	my $names = @$users ? _("(already added %s)", join(", ", map { $_->{realname} || $_->{name} } @$users)) : '';
-
-	my $verif = sub {
-	    $u->{password} eq $u->{password2} or $in->ask_warn('', [ _("The passwords do not match"), _("Please try again") ]), return (1,2);
-	    $security > 3 && length($u->{password}) < 6 and $in->ask_warn('', _("This password is too simple")), return (1,2);
-	    $u->{name} or $in->ask_warn('', _("Please give a user name")), return (1,0);
-	    $u->{name} =~ /^[a-z0-9_-]+$/ or $in->ask_warn('', _("The user name must contain only lower cased letters, numbers, `-' and `_'")), return (1,0);
-	    member($u->{name}, map { $_->{name} } @$users) and $in->ask_warn('', _("This user name is already added")), return (1,0);
-	    return 0;
-	};
-	my $ret = $in->ask_from_(
-	    { title => _("Add user"),
-	      messages => _("Enter a user\n%s", $names),
-	      ok => _("Accept user"),
-	      cancel => $security < 4 || @$users ? _("Done") : '',
-	      callbacks => {
-	          focus_out => sub {
-		      if ($_[0] eq 0) {
-			  $u->{name} ||= lc first($u->{realname} =~ /((\w|-)+)/);
-		      }
-		  },
-	          complete => $verif,
-                  canceled => sub { $u->{name} ? &$verif : 0; },
-	    } }, [ 
-	    { label => _("Real name"), val => \$u->{realname} },
-	    { label => _("User name"), val => \$u->{name} },
-            { label => _("Password"),val => \$u->{password}, hidden => 1 },
-            { label => _("Password (again)"), val => \$u->{password2}, hidden => 1 },
-            { label => _("Shell"), val => \$u->{shell}, list => [ shells($prefix) ], not_edit => !$::expert, advanced => 1 },
-	      if_($security <= 3 && @icons,
-	    { label => _("Icon"), val => \ ($u->{icon} ||= 'man'), list => \@icons, icon2f => sub { face2png($_[0], $prefix) }, format => \&translate },
-	      ),
-           ],
-        );
-
-	push @$users, $u if $u->{name};
-	$u = {};
-	$ret or return;
-    }
-}
-
-sub autologin {
-    my ($prefix, $o, $in) = @_;
-
-    my $cmd = $prefix ? "chroot $prefix" : "";
-    my @wm = (split (' ', `$cmd /usr/sbin/chksession -l 2>/dev/null`));
-    my @users = map { $_->{name} } @{$o->{users} || []};
-
-    if (@wm && @users && !$o->{authentication}{NIS} && $o->{security} <= 2) {
-	add2hash_($o, { autologin => $users[0] });
-
-	$in->ask_from_(
-		       { title => _("Autologin"),
-			 messages => _("I can set up your computer to automatically log on one user.
-Do you want to use this feature?"),
-			 ok => _("Yes"),
-			 cancel => _("No") },
-		       [ { label => _("Choose the default user:"), val => \$o->{autologin}, list => [ '', @users ] },
-			 { label => _("Choose the window manager to run:"), val => \$o->{desktop}, list => \@wm } ]
-		      )
-	  or delete $o->{autologin};
-    }
-}
-
-sub selectLanguage {
-    my ($in, $lang, $langs) = @_;
-    $in->ask_from_(
-	{ messages => _("Please, choose a language to use."),
-	  title => 'language choice',
-	  advanced_messages => _("You can choose other languages that will be available after install"),
-	  callbacks => {
-	      focus_out => sub { $langs->{$lang} = 1 },
-	  },
-	},
-	[ { val => \$lang, separator => '|', 
-	    format => \&lang::lang2text, list => [ lang::list() ] },
-	  (map {;
-	       { val => \$langs->{$_->[0]}, type => 'bool', disabled => sub { $langs->{all} },
-		 text => $_->[1], advanced => 1,
-	       } 
-	   } sort { $a->[1] cmp $b->[1] } map { [ $_, lang::lang2text($_) ] } lang::list()),
-	  { val => \$langs->{all}, type => 'bool', text => _("All"), advanced => 1 }
-	]) or return;
-    $lang;
-}
-
-sub write_passwd_user {
-    my ($prefix, $u, $isMD5) = @_;
-
-    $u->{pw} = &crypt($u->{password}, $isMD5) if $u->{password};
-    $u->{shell} ||= '/bin/bash';
-
-    substInFile {
-	my $l = unpack_passwd($_);
-	if ($l->{name} eq $u->{name}) {
-	    add2hash_($u, $l);
-	    $_ = pack_passwd($u);
-	    $u = {};
-	}
-	if (eof && $u->{name}) {
-	    $_ .= pack_passwd($u);
-	}
-    } "$prefix/etc/passwd";
-}
-
-sub runlevel {
-    my ($prefix, $runlevel) = @_;
-    my $f = "$prefix/etc/inittab";
-    -r $f or log::l("missing inittab!!!"), return;
-    if ($runlevel) {
-	substInFile { s/^id:\d:initdefault:\s*$/id:$runlevel:initdefault:\n/ } $f;
-    } else {
-	cat_($f) =~ /^id:(\d):initdefault:\s*$/ && $1;
-    }
-}
-
-sub report_bug {
-    my ($prefix, @other) = @_;
-
-    sub header { "
-********************************************************************************
-* $_[0]
-********************************************************************************";
-    }
-
-    join '', map { chomp; "$_\n" }
-      header("lspci"), detect_devices::stringlist(),
-      header("pci_devices"), cat_("/proc/bus/pci/devices"),
-      header("fdisk"), arch() =~ /ppc/ ? `$ENV{LD_LOADER} pdisk -l` : `$ENV{LD_LOADER} fdisk -l`,
-      header("scsi"), cat_("/proc/scsi/scsi"),
-      header("lsmod"), cat_("/proc/modules"),
-      header("cmdline"), cat_("/proc/cmdline"),
-      header("pcmcia: stab"), cat_("/var/run/stab"),
-      header("usb"), cat_("/proc/bus/usb/devices"),
-      header("partitions"), cat_("/proc/partitions"),
-      header("cpuinfo"), cat_("/proc/cpuinfo"),
-      header("syslog"), cat_("/tmp/syslog"),
-      header("ddcxinfos"), `$ENV{LD_LOADER} ddcxinfos`,
-      header("ddebug.log"), cat_("/tmp/ddebug.log"),
-      header("install.log"), cat_("$prefix/root/install.log"),
-      header("fstab"), cat_("$prefix/etc/fstab"),
-      map_index { even($::i) ? header($_) : $_ } @other;
-}
-
-sub devfssymlinkf {
-    my ($if, $of, $prefix) = @_;
-    symlinkf($if, "$prefix/$_") foreach ("dev/$of", "lib/dev-state/$of");
-}
-
-1;
diff --git a/perl-install/bootloader.pm b/perl-install/bootloader.pm
deleted file mode 100644
index c2a75e8dc..000000000
--- a/perl-install/bootloader.pm
+++ /dev/null
@@ -1,1004 +0,0 @@
-package bootloader; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(%vga_modes);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table qw(:types);
-use log;
-use any;
-use fsedit;
-use devices;
-use loopback;
-use detect_devices;
-use partition_table_raw;
-use run_program;
-use modules;
-
-
-%vga_modes = (
- "Ask at boot" => 'ask',
- "Normal" => 'normal',
- "80x50" => '0x0f01',
- "80x43" => '0x0f02',
- "80x28" => '0x0f03',
- "80x30" => '0x0f04',
- "80x34" => '0x0f05',
- "80x60" => '0x0f06',
- "100x30" => '0x0122',
- "640x480 in 16 bits (FrameBuffer only)" => 785,
- "800x600 in 16 bits (FrameBuffer only)" => 788,
- "1024x768 in 16 bits (FrameBuffer only)" => 791,
- "1280x1024 in 16 bits (FrameBuffer only)" => 794,
-);
-
-my %vga_modes2nb = (
- 'ask'    => -3,
- 'normal' => -1,
-#- other entries are identity
-);
-
-
-#-#####################################################################################
-#- Functions
-#-#####################################################################################
-
-sub get {
-    my ($kernel, $bootloader) = @_;
-    $_->{kernel_or_dev} && $_->{kernel_or_dev} eq $kernel and return $_ foreach @{$bootloader->{entries}};
-    undef;
-}
-sub get_label {
-    my ($label, $bootloader) = @_;
-    $_->{label} && $_->{label} eq $label and return $_ foreach @{$bootloader->{entries}};
-    undef;
-}
-
-sub mkinitrd($$$) {
-    my ($prefix, $kernelVersion, $initrdImage) = @_;
-
-    $::testing || -e "$prefix/$initrdImage" and return;
-
-    my $loop_boot = loopback::prepare_boot($prefix);
-
-    modules::load('loop');
-    run_program::rooted($prefix, "mkinitrd", "-v", "-f", $initrdImage, "--ifneeded", $kernelVersion) or unlink("$prefix/$initrdImage");
-
-    loopback::save_boot($loop_boot);
-
-    -e "$prefix/$initrdImage" or die "mkinitrd failed";
-}
-
-sub mkbootdisk($$$;$) {
-    my ($prefix, $kernelVersion, $dev, $append) = @_;
-
-    modules::load_multi(arch() =~ /sparc/ ? 'romfs' : (), 'loop');
-    my @l = qw(mkbootdisk --noprompt); 
-    push @l, "--appendargs", $append if $append;
-    eval { modules::load('vfat') };
-    run_program::rooted_or_die($prefix, @l, "--device", "/dev/$dev", $kernelVersion);
-}
-
-sub read($$) {
-    my ($prefix, $file) = @_;
-    my $global = 1;
-    my ($e, $v, $f);
-    my %b;
-    foreach (cat_("$prefix$file")) {
-	($_, $v) = /^\s*(.*?)\s*(?:=\s*(.*?))?\s*$/;
-
-	if (/^(image|other)$/) {
-	    push @{$b{entries}}, $e = { type => $_, kernel_or_dev => $v };
-	    $global = 0;
-	} elsif ($global) {
-	    $b{$_} = $v || 1;
-	} else {
-	    if ((/map-drive/ .. /to/) && /to/) {
-		$e->{mapdrive}{$e->{'map-drive'}} = $v;
-	    } else {
-		$e->{$_} = $v || 1;
-	    }
-	}
-    }
-    delete $b{timeout} unless $b{prompt};
-    $_->{append} =~ s/^\s*"?(.*?)"?\s*$/$1/ foreach \%b, @{$b{entries}};
-    $b{timeout} = $b{timeout} / 10 if $b{timeout};
-    $b{message} = cat_("$prefix$b{message}") if $b{message};
-    \%b;
-}
-
-sub suggest_onmbr {
-    my ($hds) = @_;
-    
-    my $type = partition_table_raw::typeOfMBR($hds->[0]{device});
-    !$type || member($type, qw(dos dummy lilo grub empty)), !$type;
-}
-
-sub compare_entries ($$) {
-    my ($a, $b) = @_;
-    my %entries;
-
-    @entries{keys %$a, keys %$b} = ();
-    $a->{$_} eq $b->{$_} and delete $entries{$_} foreach keys %entries;
-    scalar keys %entries;
-}
-
-sub add_entry($$) {
-    my ($entries, $v) = @_;
-    my (%usedold, $freeold);
-
-    do { $usedold{$1 || 0} = 1 if $_->{label} =~ /^old([^_]*)_/ } foreach @$entries;
-    foreach (0..scalar keys %usedold) { exists $usedold{$_} or $freeold = $_ || '', last }
-
-    foreach (@$entries) {
-	if ($_->{label} eq $v->{label}) {
-	    compare_entries($_, $v) or return; #- avoid inserting it twice as another entry already exists !
-	    $_->{label} = "old${freeold}_$_->{label}";
-	}
-    }
-    push @$entries, $v;
-}
-
-sub add_kernel($$$$$) {
-    my ($prefix, $lilo, $kernelVersion, $specific, $v) = @_;
-    my $ext = $specific && "-$specific"; $specific =~ s/\d+\.\d+|hack//;
-    my ($vmlinuz, $image, $initrdImage) = ("vmlinuz-$kernelVersion$specific", "/boot/vmlinuz$ext", "/boot/initrd$ext.img");    
-    -e "$prefix/boot/$vmlinuz" or log::l("unable to find kernel image $prefix/boot/$vmlinuz"), return;
-    {
-	my $f = "initrd-$kernelVersion$specific.img";
-	eval { mkinitrd($prefix, "$kernelVersion$specific", "/boot/$f") };
-	undef $initrdImage if $@;
-	symlinkf $f, "$prefix$initrdImage" or $initrdImage = "/boot/$f"
-	  if $initrdImage;
-    }
-    symlinkf "$vmlinuz", "$prefix/$image" or $image = "/boot/$vmlinuz";
-    add2hash($v,
-	     {
-	      type => 'image',
-	      label => 'linux',
-	      kernel_or_dev => $image,
-	      initrd => $initrdImage,
-	      append => $lilo->{perImageAppend},
-	     });
-    add_entry($lilo->{entries}, $v);
-    $v;
-}
-
-sub get_append {
-    my ($b, $key) = @_;
-    ($b->{perImageAppend} =~ /\b$key=(\S*)/)[0];
-}
-sub add_append {
-    my ($b, $key, $val) = @_;
-
-    foreach ({ append => $b->{perImageAppend} }, @{$b->{entries}}) {
-	$_->{append} =~ s/\b$key=\S*\s*//;
-	$_->{append} =~ s/\s*$/ $key=$val/ if $val;
-    }
-}
-
-sub configure_entry($$) {
-    my ($prefix, $entry) = @_;
-    if ($entry->{type} eq 'image') {
-	my $specific_version;
-	$entry->{kernel_or_dev} =~ /vmlinu.-(.*)/ and $specific_version = $1;
-	readlink("$prefix/$entry->{kernel_or_dev}") =~ /vmlinu.-(.*)/ and $specific_version = $1;
-
-	if ($specific_version) {
-	    $entry->{initrd} or $entry->{initrd} = "/boot/initrd-$specific_version.img";
-	    unless (-e "$prefix/$entry->{initrd}") {
-		eval { mkinitrd($prefix, $specific_version, "$entry->{initrd}") };
-		undef $entry->{initrd} if $@;
-	    }
-	}
-    }
-    $entry;
-}
-
-sub dev2prompath { #- SPARC only
-    my ($dev) = @_;
-    my ($wd, $num) = $dev =~ /^(.*\D)(\d*)$/;
-    require c;
-    $dev = c::disk2PromPath($wd) and $dev = $dev =~ /^sd\(/ ? "$dev$num" : "$dev;$num";
-    $dev;
-}
-
-sub suggest {
-    my ($prefix, $lilo, $hds, $fstab, $kernelVersion, $vga_fb) = @_;
-    my $root_part = fsedit::get_root($fstab);
-    my $root = isLoopback($root_part) ? "loop7" : $root_part->{device};
-    my $boot = fsedit::get_root($fstab, 'boot')->{device};
-    my $partition = first($boot =~ /\D*(\d*)/);
-
-    require c; c::initSilo() if arch() =~ /sparc/;
-
-    my ($onmbr, $unsafe) = $lilo->{crushMbr} ? (1, 0) : suggest_onmbr($hds);
-    add2hash_($lilo, arch() =~ /sparc/ ?
-	{
-	 default => "linux",
-	 entries => [],
-	 timeout => 5,
-	 use_partition => 0, #- we should almost always have a whole disk partition.
-	 root          => "/dev/$root",
-	 partition     => $partition || 1,
-	 boot          => $root eq $boot && "/boot", #- this helps for getting default partition for silo.
-	} : arch =~ /ppc/ ?
-	{
-	 defaultos => "linux",
-	 default => "linux",
-	 entries => [],
-	 initmsg => "Welcome to Mandrake Linux!",
-	 delay => 30,	#- OpenFirmware delay
-	 timeout => 50,
-	 enableofboot => 1,
-	 enablecdboot => 1,
-	 useboot => $boot,
-	} :
-	{
-	 bootUnsafe => $unsafe,
-	 default => "linux",
-	 entries => [],
-	 timeout => $onmbr && 5,
-	   if_(arch() !~ /ia64/,
-	 lba32 => 1,
-	 boot => "/dev/" . ($onmbr ? $hds->[0]{device} : fsedit::get_root($fstab, 'boot')->{device}),
-	 map => "/boot/map",
-	 install => "/boot/boot.b",
-         ),
-	});
-
-    if (!$lilo->{message} || $lilo->{message} eq "1") {
-	$lilo->{message} = join('', cat_("$prefix/boot/message"));
-	if (!$lilo->{message}) {
-	    my $msg_en =
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-__("Welcome to %s the operating system chooser!
-
-Choose an operating system in the list above or
-wait %d seconds for default boot.
-
-");
-	    my $msg = translate($msg_en);
-	    #- use the english version if more than 20% of 8bits chars
-	    $msg = $msg_en if int(grep { $_ & 0x80 } unpack "c*", $msg) / length($msg) > 0.2;
-	    $lilo->{message} = sprintf $msg, arch() =~ /sparc/ ? "SILO" : "LILO", $lilo->{timeout};
-	}
-    }
-
-
-    add2hash_($lilo, { getVarsFromSh("$prefix/etc/sysconfig/system") }); #- for CLEAN_TMP
-    add2hash_($lilo, { memsize => $1 }) if cat_("/proc/cmdline") =~ /mem=(\S+)/;
-
-    #- give more priority to secure kernel because if the user want security, he will got it...
-    my $isSecure = -e "$prefix/boot/vmlinuz-${kernelVersion}secure";
-    my $isEnterprise = -e "$prefix/boot/vmlinuz-${kernelVersion}enterprise";
-
-    my $isSMP = detect_devices::hasSMP();
-    if ($isSMP && !-e "$prefix/boot/vmlinuz-${kernelVersion}smp") {
-	log::l("SMP machine, but no SMP kernel found") unless $isSecure;
-	$isSMP = 0;
-    }
-    my $entry = add_kernel($prefix, $lilo, $kernelVersion,
-			   $isSecure ? 'secure' : $isEnterprise ? 'enterprise' : $isSMP ? 'smp' : '',
-	       {
-		label => 'linux',
-		root  => "/dev/$root",
-		if_($vga_fb, vga => $vga_fb), #- using framebuffer
-	       });
-    add_kernel($prefix, $lilo, $kernelVersion, '',
-	       {
-		label => $isSecure || $isEnterprise || $isSMP ? 'linux-up' : 'linux-nonfb',
-		root  => "/dev/$root",
-	       }) if $isSecure || $isEnterprise || $isSMP || $vga_fb;
-    my $failsafe = add_kernel($prefix, $lilo, $kernelVersion, '',
-	       {
-		label => 'failsafe',
-		root  => "/dev/$root",
-	       });
-    $entry->{append} .= " quiet" if $vga_fb && !$isSMP && !$isEnterprise;
-    $failsafe->{append} .= " failsafe" if $failsafe && !$lilo->{password};
-
-    #- manage prioritary default kernel (given as /boot/vmlinuz-default).
-    if (-e "$prefix/boot/vmlinuz-default") {
-	#- we use directly add_entry as no initrd should be done.
-	add_entry($lilo->{entries},
-		  {
-		   type => 'image',
-		   label => 'default',
-		   root  => "/dev/$root",
-		   kernel_or_dev => '/boot/vmlinuz-default',
-		   append => $lilo->{perImageAppend},
-		  });
-	$lilo->{default} = 'default'; #- this one should be booted by default now.
-    }
-
-    #- manage older kernel if installed.
-    foreach (qw(2.2 hack)) {
-	my $f = "$prefix/boot/vmlinuz-$_";
-	if (-e $f) {
-	    my $oldVersion = first(readlink($f) =~ /vmlinuz-(.*mdk)/);
-	    my $oldSecure = -e "$prefix/boot/vmlinuz-${oldVersion}secure";
-	    my $oldSMP = -e "$prefix/boot/vmlinuz-${oldVersion}smp";
-
-	    add_kernel($prefix, $lilo, $oldVersion, $_ . ($oldSecure ? 'secure' : $oldSMP ? 'smp' : ''),
-		       {
-			label => "linux-$_",
-			root  => "/dev/$root",
-			$vga_fb ? ( vga => $vga_fb) : (), #- using framebuffer
-		       });
-	    add_kernel($prefix, $lilo, $oldVersion, $_,
-		       {
-			label => $oldSecure || $oldSMP ? "linux-${_}up" : "linux-${_}nonfb",
-			root  => "/dev/$root",
-		       }) if $oldSecure || $oldSMP || $vga_fb;
-	    my $entry = add_kernel($prefix, $lilo, $oldVersion, $_,
-		       {
-			label => "failsafe-$_",
-			root  => "/dev/$root",
-		       });
-	    $entry->{append} .= " failsafe" if $entry && !$lilo->{password};
-	}
-    }
-
-    if (arch() =~ /sparc/) {
-	#- search for SunOS, it could be a really better approach to take into account
-	#- partition type for mounting point.
-	my $sunos = 0;
-	foreach (@$hds) {
-	    foreach (@{$_->{primary}{normal}}) {
-		my $path = $_->{device} =~ m|^/| && $_->{device} !~ m|^/dev/| ? $_->{device} : dev2prompath($_->{device});
-		add_entry($lilo->{entries},
-			  {
-			   type => 'other',
-			   kernel_or_dev => $path,
-			   label => "sunos"   . ($sunos++ ? $sunos : ''),
-			  }) if $path && isSunOS($_) && type2name($_->{type}) =~ /root/i;
-	    }
-	}
-    } elsif (arch() =~ /ppc/) {
-	#- if we identified a MacOS partition earlier - add it
-	if (defined $partition_table_mac'macos_part) {
-	    add_entry($lilo->{entries},
-		      {
-		       label => "macos",
-		       kernel_or_dev => $partition_table_mac'macos_part
-		      });
-	}
-    } elsif (arch() !~ /ia64/) {
-	#- search for dos (or windows) boot partition. Don't look in extended partitions!
-	my %nbs;
-	foreach (@$hds) {
-	    foreach (@{$_->{primary}{normal}}) {
-		my $label = isNT($_) ? 'NT' : isDos($_) ? 'dos' : 'windows';
-		add_entry($lilo->{entries},
-			  {
-			   type => 'other',
-			   kernel_or_dev => "/dev/$_->{device}",
-			   label => $label . ($nbs{$label}++ ? $nbs{$label} : ''),
-			     if_($_->{device} =~ /[1-4]$/, 
-			   table => "/dev/$_->{rootDevice}"
-				),
-			   unsafe => 1
-			  }) if isNT($_) || isFat($_) && isFat({ type => fsedit::typeOfPart($_->{device}) });
-	    }
-	}
-    }
-    my %l = (
-	     yaboot => to_bool(arch() =~ /ppc/),
-	     silo => to_bool(arch() =~ /sparc/),
-	     lilo => to_bool(arch() !~ /sparc|ppc/) && !isLoopback(fsedit::get_root($fstab)),
-	     grub => to_bool(arch() !~ /sparc|ppc/ && !isRAID(fsedit::get_root($fstab))),
-	     loadlin => to_bool(arch() !~ /sparc|ppc/) && -e "/initrd/loopfs/lnx4win",
-	    );
-    unless ($lilo->{methods}) {
-	$lilo->{methods} ||= { map { $_ => 1 } grep { $l{$_} } keys %l };
-	if ($lilo->{methods}{lilo} && -e "$prefix/boot/lilo-graphic") {
-	    $lilo->{methods}{lilo} = "lilo-graphic";
-	    exists $lilo->{methods}{grub} and $lilo->{methods}{grub} = undef;
-	}
-    }
-}
-
-sub suggest_floppy {
-    my ($bootloader) = @_;
-
-    my $floppy = detect_devices::floppy() or return;
-    $floppy eq 'fd0' or log::l("suggest_floppy: not adding $floppy"), return;
-
-    add_entry($bootloader->{entries},
-      {
-       type => 'other',
-       kernel_or_dev => '/dev/fd0',
-       label => 'floppy',
-       unsafe => 1
-      });
-}
-
-sub keytable($$) {
-    my ($prefix, $f) = @_;
-    local $_ = $f;
-    if ($_ && !/\.klt$/) {
-	$f = "/boot/$_.klt";
-	run_program::rooted($prefix, "keytab-lilo.pl", ">", $f, $_) or undef $f;
-    }
-    $f && -r "$prefix/$f" && $f;
-}
-
-sub has_profiles { to_bool(get_label("office", $b)) }
-sub set_profiles {
-    my ($b, $want_profiles) = @_;
-
-    my $office = get_label("office", $b);
-    if ($want_profiles xor $office) {
-	my $e = get_label("linux", $b);
-	if ($want_profiles) {
-	    push @{$b->{entries}}, { %$e, label => "office", append => "$e->{append} prof=Office" };
-	    $e->{append} .= " prof=Home";
-	} else {
-	    # remove profiles
-	    $e->{append} =~ s/\s*prof=\w+//;
-	    @{$b->{entries}} = grep { $_ != $office } @{$b->{entries}};
-	}
-    }
-
-}
-
-sub get_of_dev($$) {
-	my ($prefix, $unix_dev) = @_;
-	#- don't care much for this - need to run ofpath rooted, and I need the result
-	#- In test mode, just run on "/", otherwise you can't get to the /proc files		
-	if ($::testing) {
-		$prefix = "";
-	}
-	run_program::rooted_or_die($prefix, "/usr/local/sbin/ofpath $unix_dev", ">", "/tmp/ofpath");
-	open(FILE, "$prefix/tmp/ofpath") || die "Can't open $prefix/tmp/ofpath";
-	my $of_dev = "";
-	local $_ = "";
-	while (<FILE>){
-		$of_dev = $_;
-	}
-	chop($of_dev);
-	my @del_file = ($prefix . "/tmp/ofpath");
-	unlink (@del_file);
-	log::l("OF Device: $of_dev");
-	$of_dev;
-}
-
-sub install_yaboot($$$) {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-    $lilo->{prompt} = $lilo->{timeout};
-
-    if ($lilo->{message}) {
-	local *F;
-	open F, ">$prefix/boot/message" and print F $lilo->{message} or $lilo->{message} = 0;
-    }
-    {
-	local *F;
-        local $\ = "\n";
-	my $f = "$prefix/etc/yaboot.conf";
-	open F, ">$f" or die "cannot create yaboot config file: $f";
-	log::l("writing yaboot config to $f");
-
-	print F "#yaboot.conf - generated by DrakX";
-	print F "init-message=\"\\n$lilo->{initmsg}\\n\"" if $lilo->{initmsg};
-
-	if ($lilo->{boot}) {
-	    print F "boot=$lilo->{boot}";
-	    my $of_dev = get_of_dev($prefix, $lilo->{boot});
-	    print F "ofboot=$of_dev";
-	} else {
-	    die "no bootstrap partition defined."
-	}
-	
-	$lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(delay timeout);
-	print F "install=/usr/local/lib/yaboot/yaboot";
-	print F "magicboot=/usr/local/lib/yaboot/ofboot";
-	$lilo->{$_} and print F $_ foreach qw(enablecdboot enableofboot);
-	$lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(defaultos default);
-	print F "nonvram";
-	my $boot = "/dev/" . $lilo->{useboot} if $lilo->{useboot};
-		
-	foreach (@{$lilo->{entries}}) {
-
-	    if ($_->{type} eq "image") {
-		my $of_dev = '';
-		if ($boot !~ /$_->{root}/) {
-		    $of_dev = get_of_dev($prefix, $boot);
-		    print F "$_->{type}=$of_dev," . substr($_->{kernel_or_dev}, 5);
-		} else {
-		    $of_dev = get_of_dev($prefix, $_->{root});    			
-		    print F "$_->{type}=$of_dev,$_->{kernel_or_dev}";
-		}
-		print F "\tlabel=", substr($_->{label}, 0, 15); #- lilo doesn't handle more than 15 char long labels
-		print F "\troot=$_->{root}";
-		if ($boot !~ /$_->{root}/) {
-		    print F "\tinitrd=$of_dev," . substr($_->{initrd}, 5) if $_->{initrd};
-		} else {
-		    print F "\tinitrd=$of_dev,$_->{initrd}" if $_->{initrd};
-		}
-		print F "\tappend=\"$_->{append}\"" if $_->{append};
-		print F "\tread-write" if $_->{'read-write'};
-		print F "\tread-only" if !$_->{'read-write'};
-	    } else {
-		my $of_dev = get_of_dev($prefix, $_->{kernel_or_dev});
-		print F "$_->{label}=$of_dev";		
-	    }
-	}
-    }
-    log::l("Installing boot loader...");
-    my $f = "$prefix/tmp/of_boot_dev";
-    my $of_dev = get_of_dev($prefix, $lilo->{boot});
-    output($f, "$of_dev\n");  
-    $::testing and return;
-    if (defined $install_steps_interactive::new_bootstrap) {
-	run_program::run("hformat", "$lilo->{boot}") or die "hformat failed";
-    }	
-    run_program::rooted_or_die($prefix, "/sbin/ybin", "2>", "/tmp/.error");
-    unlink "$prefix/tmp/.error";	
-}
-
-sub install_silo($$$) {
-    my ($prefix, $silo, $fstab) = @_;
-    my $boot = fsedit::get_root($fstab, 'boot')->{device};
-    my ($wd, $num) = $boot =~ /^(.*\D)(\d*)$/;
-
-    #- setup boot promvars for.
-    require c;
-    if ($boot =~ /^md/) {
-	#- get all mbr devices according to /boot are listed,
-	#- then join all zero based partition translated to prom with ';'.
-	#- keep bootdev with the first of above.
-	log::l("/boot is present on raid partition which is not currently supported for promvars");
-    } else {
-	if (!$silo->{use_partition}) {
-	    foreach (@$fstab) {
-		if (!$_->{start} && $_->{device} =~ /$wd/) {
-		    $boot = $_->{device};
-		    log::l("found a zero based partition in $wd as $boot");
-		    last;
-		}
-	    }
-	}
-	$silo->{bootalias} = c::disk2PromPath($boot);
-	$silo->{bootdev} = $silo->{bootalias};
-        log::l("preparing promvars for device=$boot");
-    }
-    c::hasAliases() or log::l("clearing promvars alias as non supported"), $silo->{bootalias} = '';
-
-    if ($silo->{message}) {
-	local *F;
-	open F, ">$prefix/boot/message" and print F $silo->{message} or $silo->{message} = 0;
-    }
-    {
-	local *F;
-        local $\ = "\n";
-	my $f = "$prefix/boot/silo.conf"; #- always write the silo.conf file in /boot ...
-	symlinkf "../boot/silo.conf", "$prefix/etc/silo.conf"; #- ... and make a symlink from /etc.
-	open F, ">$f" or die "cannot create silo config file: $f";
-	log::l("writing silo config to $f");
-
-	$silo->{$_} and print F "$_=$silo->{$_}" foreach qw(partition root default append);
-	$silo->{$_} and print F $_ foreach qw(restricted);
-	print F "password=", $silo->{password} if $silo->{restricted} && $silo->{password}; #- also done by msec
-	print F "timeout=", round(10 * $silo->{timeout}) if $silo->{timeout};
-	print F "message=$silo->{boot}/message" if $silo->{message};
-
-	foreach (@{$silo->{entries}}) {#my ($v, $e) = each %{$silo->{entries}}) {
-	    my $type = "$_->{type}=$_->{kernel_or_dev}"; $type =~ s|/boot|$silo->{boot}|;
-	    print F $type;
-	    print F "\tlabel=$_->{label}";
-
-	    if ($_->{type} eq "image") {
-		my $initrd = $_->{initrd}; $initrd =~ s|/boot|$silo->{boot}|;
-		print F "\tpartition=$_->{partition}" if $_->{partition};
-		print F "\troot=$_->{root}" if $_->{root};
-		print F "\tinitrd=$initrd" if $_->{initrd};
-		print F "\tappend=\"$1\"" if $_->{append} =~ /^\s*"?(.*?)"?\s*$/;
-		print F "\tread-write" if $_->{'read-write'};
-		print F "\tread-only" if !$_->{'read-write'};
-	    }
-	}
-    }
-    log::l("Installing boot loader...");
-    $::testing and return;
-    run_program::rooted($prefix, "silo", "2>", "/tmp/.error", $silo->{use_partition} ? ("-t") : ()) or 
-        run_program::rooted_or_die($prefix, "silo", "2>", "/tmp/.error", "-p", "2", $silo->{use_partition} ? ("-t") : ());
-    unlink "$prefix/tmp/.error";
-
-    #- try writing in the prom.
-    log::l("setting promvars alias=$silo->{bootalias} bootdev=$silo->{bootdev}");
-    require c;
-    c::setPromVars($silo->{bootalias}, $silo->{bootdev});
-}
-
-sub write_lilo_conf {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-    $lilo->{prompt} = $lilo->{timeout};
-
-    delete $lilo->{linear} if $lilo->{lba32};
-
-    my $file2fullname = sub {
-	my ($file) = @_;
-	if (arch() =~ /ia64/) {
-	    (my $part, $file) = fsedit::file2part($prefix, $fstab, $file);
-	    my %hds = map_index { $_ => "hd$::i" } map { $_->{device} } 
-	      sort { isFat($b) <=> isFat($a) || $a->{device} cmp $b->{device} } fsedit::get_fstab(@$hds);
-	    %hds->{$part->{device}} . ":" . $file;
-	} else {
-	    $file
-	}
-    };
-
-    if ($lilo->{message}) {
- 	local *F;
-	-d "$prefix/boot/lilo-menu" and open F, ">$prefix/boot/lilo-menu/message" and print F $lilo->{message};
-	-d "$prefix/boot/lilo-text" and open F, ">$prefix/boot/lilo-text/message" and print F $lilo->{message};
-	-d "$prefix/boot/lilo-graphic" || -d "$prefix/boot/lilo-menu" || -d "$prefix/boot/lilo-text" or
-	  open F, ">$prefix/boot/message" and print F $lilo->{message}; #- fallback in case of another lilo.
-    }
-    foreach ($lilo->{methods}{lilo}, "lilo-menu", "lilo-graphic", "lilo-text") {
-	if (-e "$prefix/boot/$_/boot.b" && -e "$prefix/boot/$_/message") {
-	    symlinkf $_, "$prefix/boot/lilo";
-	    symlinkf "lilo/boot.b", "$prefix/boot/boot.b";
-	    symlinkf "lilo/message", "$prefix/boot/message";
-	    log::l("stage2 of lilo used is " . readlink "$prefix/boot/lilo");
-	    last;
-	}
-    }
-	if (arch() !~ /ia64/) {
-		-e "$prefix/boot/boot.b" && -e "$prefix/boot/message" or die "unable to get right lilo configuration in $prefix/boot";
-	}
-
-    {
-	local *F;
-        local $\ = "\n";
-	my $f = arch() =~ /ia64/ ? "$prefix/boot/efi/elilo.conf" : "$prefix/etc/lilo.conf";
-
-	open F, ">$f" or die "cannot create lilo config file: $f";
-	log::l("writing lilo config to $f");
-
-	$lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(boot map install vga default append keytable);
-	$lilo->{$_} and print F $_ foreach qw(linear lba32 compact prompt restricted);
- 	print F "password=", $lilo->{password} if $lilo->{restricted} && $lilo->{password}; #- also done by msec
-	print F "timeout=", round(10 * $lilo->{timeout}) if $lilo->{timeout};
-
-	my $dev = $hds->[0]{device};
-	my %dev2bios = map_index { $_ => $::i } dev2bios($hds, $lilo->{boot});
-	if ($dev2bios{$dev}) {
-	    my %bios2dev = reverse %dev2bios;
-	    print  F "disk=/dev/$bios2dev{0} bios=0x80";
-	    printf F "disk=/dev/$dev bios=0x%x", 0x80 + $dev2bios{$dev};
-	} elsif ($dev =~ /hd[bde]/) {
-	    print F "disk=/dev/$dev bios=0x80";
-	}
-
-	print F "message=/boot/message" if (arch() !~ /ia64/);
-	print F "menu-scheme=wb:bw:wb:bw" if (arch() !~ /ia64/);
-
-	foreach (@{$lilo->{entries}}) {
-	    print F "$_->{type}=", $file2fullname->($_->{kernel_or_dev});
-	    my $label = substr($_->{label}, 0, 15); #- lilo doesn't handle more than 15 char long labels
-	    $label =~ s/\s/_/g; #- lilo doesn't like spaces
-	    print F "\tlabel=$label"; 
-
-	    if ($_->{type} eq "image") {		
-		print F "\troot=$_->{root}";
-		print F "\tinitrd=", $file2fullname->($_->{initrd}) if $_->{initrd};
-		print F "\tappend=\"$_->{append}\"" if $_->{append};
-		print F "\tvga=$_->{vga}" if $_->{vga};
-		print F "\tread-write" if $_->{'read-write'};
-		print F "\tread-only" if !$_->{'read-write'};
-	    } else {
-		print F "\ttable=$_->{table}" if $_->{table};
-		print F "\tunsafe" if $_->{unsafe} && !$_->{table};
-		
-		if (my ($dev) = $_->{table} =~ m|/dev/(.*)|) {
-		    if ($dev2bios{$dev}) {
-			#- boot off the nth drive, so reverse the BIOS maps
-			my $nb = sprintf("0x%x", 0x80 + $dev2bios{$dev});
-			$_->{mapdrive} ||= { '0x80' => $nb, $nb => '0x80' }; 
-		    }
-		}
-		while (my ($from, $to) = each %{$_->{mapdrive} || {}}) {
-		    print F "\tmap-drive=$from";
-		    print F "\t   to=$to";
-		}
-	    }
-	}
-    }
-}
-
-sub install_lilo {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-
-    write_lilo_conf($prefix, $lilo, $fstab, $hds);
-
-    log::l("Installing boot loader...");
-    $::testing and return;
-    run_program::rooted_or_die($prefix, "lilo", "2>", "/tmp/.error") if (arch() !~ /ia64/);
-    unlink "$prefix/tmp/.error";
-}
-
-sub dev2bios {
-    my ($hds, $where) = @_;
-    my @dev = map { $_->{device} } @$hds;
-    member($where, @dev) or ($where) = @dev; #- if not on mbr, 
-
-    s/h(d[e-g])/x$1/ foreach $where, @dev; #- emulates ultra66 as xd_
-
-    my $start = substr($where, 0, 2);
-
-    my $translate = sub {
-	$_ eq $where ? "aaa" : #- if exact match, value it first
-	  /^$start(.*)/ ? "ad$1" : #- if same class (ide/scsi/ultra66), value it before other classes
-	    $_;
-    };
-    @dev = map { $_->[0] }
-           sort { $a->[1] cmp $b->[1] }
-	   map { [ $_, &$translate ] } @dev;
-
-    s/x(d.)/h$1/ foreach @dev; #- switch back;
-
-    @dev;
-}
-
-sub dev2grub {
-    my ($dev, $dev2bios) = @_;
-    $dev =~ m|^(/dev/)?(...)(.*)$| or die "dev2grub (bad device $dev), caller is " . join(":", caller());
-    my $grub = $dev2bios->{$2} or die "dev2grub ($2)";
-    "($grub" . ($3 && "," . ($3 - 1)) . ")";
-}
-
-sub write_grub_config {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-    my %dev2bios = (
-      (map_index { $_ => "fd$::i" } detect_devices::floppies_dev()),
-      (map_index { $_ => "hd$::i" } dev2bios($hds, $lilo->{boot})),
-    );
-
-    {
-	my %bios2dev = reverse %dev2bios;
-	output "$prefix/boot/grub/device.map", 
-	  join '', map { "($_) /dev/$bios2dev{$_}\n" } sort keys %bios2dev;
-    }
-    my $bootIsReiser = isThisFs("reiserfs", fsedit::get_root($fstab, 'boot'));
-    my $file2grub = sub {
-	my ($part, $file) = fsedit::file2part($prefix, $fstab, $_[0], 'keep_simple_symlinks');
-	dev2grub($part->{device}, \%dev2bios) . $file;
-    };
-    {
-	local *F;
-        local $\ = "\n";
-	my $f = "$prefix/boot/grub/menu.lst";
-	open F, ">$f" or die "cannot create grub config file: $f";
-	log::l("writing grub config to $f");
-
-	$lilo->{$_} and print F "$_ $lilo->{$_}" foreach qw(timeout);
-
-	print F "color black/cyan yellow/cyan";
-	print F "i18n ", $file2grub->("/boot/grub/messages");
-	print F "keytable ", $file2grub->($lilo->{keytable}) if $lilo->{keytable};
-	#- since we use notail in reiserfs, altconfigfile is broken :-(
-	unless ($bootIsReiser) {
-	    print F "altconfigfile ", $file2grub->(my $once = "/boot/grub/menu.once");
-	    output "$prefix$once", " " x 100;
-	}
-
-	map_index {
-	    print F "default $::i" if $_->{label} eq $lilo->{default};
-	} @{$lilo->{entries}};
-
-	foreach (@{$lilo->{entries}}) {
-	    print F "\ntitle $_->{label}";
-
-	    if ($_->{type} eq "image") {
-		my $vga = $_->{vga} || $lilo->{vga};
-		printf F "kernel %s root=%s %s%s%s\n",
-		  $file2grub->($_->{kernel_or_dev}),
-		  $_->{root} =~ /loop7/ ? "707" : $_->{root}, #- special to workaround bug in kernel (see #ifdef CONFIG_BLK_DEV_LOOP)
-		  $_->{append},
-		  $_->{'read-write'} && " rw",
-		  $vga && $vga ne "normal" && " vga=$vga";
-		print F "initrd ", $file2grub->($_->{initrd}) if $_->{initrd};
-	    } else {
-		print F "root ", dev2grub($_->{kernel_or_dev}, \%dev2bios);
-		if ($_->{kernel_or_dev} !~ /fd/) {
-		    #- boot off the second drive, so reverse the BIOS maps
-		    $_->{mapdrive} ||= { '0x80' => '0x81', '0x81' => '0x80' } 
-		      if $_->{table} && $lilo->{boot} !~ /$_->{table}/;
-	    
-		    map_each { print F "map ($::b) ($::a)" } %{$_->{mapdrive} || {}};
-
-		    print F "makeactive";
-		}
-		print F "chainloader +1";
-	    }
-	}
-    }
-    my $hd = fsedit::get_root($fstab, 'boot')->{rootDevice};
-
-    my $dev = dev2grub($lilo->{boot}, \%dev2bios);
-    my ($s1, $s2, $m) = map { $file2grub->("/boot/grub/$_") } qw(stage1 stage2 menu.lst);
-    my $f = "/boot/grub/install.sh";
-    output "$prefix$f",
-"grub --device-map=/boot/grub/device.map --batch <<EOF
-install $s1 d $dev $s2 p $m
-quit
-EOF
-";
-
-     output "$prefix/boot/grub/messages", map { substr(translate($_) . "\n", 0, 78) } ( #- ensure the translated messages are not too big the hard way
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("Welcome to GRUB the operating system chooser!"),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("Use the %c and %c keys for selecting which entry is highlighted."),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("Press enter to boot the selected OS, \'e\' to edit the"),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("commands before booting, or \'c\' for a command-line."),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("The highlighted entry will be booted automatically in %d seconds."),
-);
-   
-    my $e = "$prefix/boot/.enough_space";
-    output $e, 1; -s $e or die _("not enough room in /boot");
-    unlink $e;
-    $f;
-}
-
-sub install_grub {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-
-    my $f = write_grub_config($prefix, $lilo, $fstab, $hds);
-
-    log::l("Installing boot loader...");
-    $::testing and return;
-    symlink "$prefix/boot", "/boot";
-    run_program::run_or_die("sh", $f);
-    unlink "$prefix/tmp/.error.grub", "/boot";
-}
-
-sub lnx4win_file { 
-    my $lilo = shift;
-    map { local $_ = $_; s,/,\\,g; "$lilo->{boot_drive}:\\lnx4win$_" } @_;
-}
-
-sub loadlin_cmd {
-    my ($prefix, $lilo) = @_;
-    my $e = get_label("linux", $lilo) || first(grep { $_->{type} eq "image" } @{$lilo->{entries}});
-
-    cp_af("$prefix$e->{kernel_or_dev}", "$prefix/boot/vmlinuz") unless -e "$prefix/boot/vmlinuz";
-    cp_af("$prefix$e->{initrd}", "$prefix/boot/initrd.img") unless -e "$prefix/boot/initrd.img";
-
-    $e->{label}, sprintf"%s %s initrd=%s root=%s $e->{append}", 
-      lnx4win_file($lilo, "/loadlin.exe", "/boot/vmlinuz", "/boot/initrd.img"),
-	$e->{root} =~ /loop7/ ? "0707" : $e->{root}; #- special to workaround bug in kernel (see #ifdef CONFIG_BLK_DEV_LOOP)
-}
-
-sub install_loadlin {
-    my ($prefix, $lilo, $fstab) = @_;
-
-    my $boot;
-    ($boot) = grep { $lilo->{boot} eq "/dev/$_->{device}" } @$fstab;
-    ($boot) = grep { loopback::carryRootLoopback($_) } @$fstab unless $boot && $boot->{device_windobe};
-    ($boot) = grep { isFat($_) } @$fstab unless $boot && $boot->{device_windobe};
-    log::l("loadlin device is $boot->{device} (windobe $boot->{device_windobe})");
-    $lilo->{boot_drive} = $boot->{device_windobe};
-
-    my ($winpart) = grep { $_->{device_windobe} eq 'C' } @$fstab;
-    log::l("winpart is $winpart->{device}");
-    my $winhandle = any::inspect($winpart, $prefix, 'rw');
-    my $windrive = $winhandle->{dir};
-    log::l("windrive is $windrive");
-
-    my ($label, $cmd) = loadlin_cmd($prefix, $lilo);
-
-    #install_loadlin_config_sys($lilo, $windrive, $label, $cmd);
-    #install_loadlin_desktop($lilo, $windrive);
-
-    output "/initrd/loopfs/lnx4win/linux.bat", unix2dos(
-'@echo off
-echo Mandrake Linux
-smartdrv /C
-' . "$cmd\n");
-
-}
-
-sub install_loadlin_config_sys {
-    my ($lilo, $windrive, $label, $cmd) = @_;
-
-    my $config_sys = "$windrive/config.sys";
-    local $_ = cat_($config_sys);
-    output "$windrive/config.mdk", $_ if $_;
-    
-    my $timeout = $lilo->{timeout} || 1;
-
-    $_ = "
-[Menu]
-menuitem=Windows
-menudefault=Windows,$timeout
-
-[Windows]
-" . $_ if !/^\Q[Menu]/m;
-
-    #- remove existing entry
-    s/^menuitem=$label\s*//mi;    
-    s/\n\[$label\].*?(\n\[|$)/$1/si;
-
-    #- add entry
-    s/(.*\nmenuitem=[^\n]*)/$1\nmenuitem=$label/s;
-
-    $_ .= "
-[$label]
-shell=$cmd
-";
-    output $config_sys, unix2dos($_);
-}
-
-sub install_loadlin_desktop {
-    my ($lilo, $windrive) = @_;
-    my $windir = lc(cat_("$windrive/msdos.sys") =~ /^WinDir=.:\\(\S+)/m ? $1 : "windows");
-
-#-PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#-PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-    foreach (__("Desktop"),
-#-PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows 
-	     __("Start Menu")) {
-        my $d = "$windrive/$windir/" . translate($_);
-        -d $d or $d = "$windrive/$windir/$_";
-        -d $d or log::l("can't find windows $d directory"), next;
-        output "$d/Linux4Win.url", unix2dos(sprintf 
-q([InternetShortcut]
-URL=file:\lnx4win\lnx4win.exe
-WorkingDirectory=%s
-IconFile=%s
-IconIndex=0
-), lnx4win_file($lilo, "/", "/lnx4win.ico"));
-    }
-}
-
-
-sub install {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-
-    if (my ($p) = grep { $lilo->{boot} =~ /\Q$_->{device}/ } @$fstab) {
-	die _("You can't install the bootloader on a %s partition\n", partition_table::type2fs($p))
-	  if isThisFs('xfs', $p);
-    }
-    {
-	my $f = "$prefix/etc/sysconfig/system";
-	setVarsInSh($f, add2hash_({ CLEAN_TMP => $lilo->{CLEAN_TMP} }, { getVarsFromSh($f) }));
-    }
-    $lilo->{keytable} = keytable($prefix, $lilo->{keytable});
-
-    if (exists $lilo->{methods}{grub}) {
-	#- when lilo is selected, we don't try to install grub. 
-	#- just create the config file in case it may be useful
-	eval { write_grub_config($prefix, $lilo, $fstab, $hds) };
-    }
-
-    my %l = grep_each { $::b } %{$lilo->{methods}};
-    my @rcs = map {
-	c::is_secure_file('/tmp/.error') or die "can't ensure a safe /tmp/.error";
-	my $f = $bootloader::{"install_$_"} or die "unknown bootloader method $_";
-	eval { $f->(@_) };
-	$@;
-    } reverse sort keys %l; #- reverse sort for having grub installed after lilo if both are there.
-    
-    return if grep { !$_ } @rcs; #- at least one worked?
-    die first(map { $_ } @rcs);
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
diff --git a/perl-install/bootlook.pm b/perl-install/bootlook.pm
deleted file mode 100644
index fd0505167..000000000
--- a/perl-install/bootlook.pm
+++ /dev/null
@@ -1,341 +0,0 @@
-#!/usr/bin/perl -w
-
-# Control-center
-
-# Copyright (C) 2001 MandrakeSoft
-# Yves Duret <yduret at mandrakesoft.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-
-use MDK::Common;
-use Gtk;
-use Config;
-init Gtk;
-use POSIX;
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-use standalone;
-use any;
-use bootloader;
-use fs;
-use my_gtk qw(:helpers :wrappers :ask);
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~/--embedded (\S*) (\S*)/;
-if ($::isEmbedded) {
-  print "EMBED\n";
-  print "XID : $::XID\n";
-  print "CCPID :  $::CCPID\n";
-}
-
-my $in = 'interactive'->vnew('su', 'default');
-local $_ = join '', @ARGV;
-
-/-h/ and die _("no help implemented yet.\n");
-/-version/ and die 'version: $Id$'."\n";
-
-my @winm;
-my @usernames;
-parse_etc_passwd();
-
-my $x_mode = isXlaunched();
-my $a_mode = (-e "/etc/aurora/Monitor") ? 1 : 0;
-my $l_mode = isAutologin();
-my %auto_mode = get_autologin("");
-my $inmain = 0;
-my $lilogrub = chomp_(`detectloader -q`);
-
-my $window = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window ("toplevel");
-$window->signal_connect(delete_event => sub { $::isEmbedded ? kill(USR1, $::CCPID) : Gtk->exit(0) });
-$window->set_title(_("Boot Style Configuration") );
-$window->border_width(2);
-#$window->realize;
-
-# drakX mode
-my ($t_pixmap, $t_mask) = gtkcreate_png("tradi.png");
-my ($h_pixmap, $h_mask) = gtkcreate_png("hori.png");
-my ($v_pixmap, $v_mask) = gtkcreate_png("verti.png");
-my ($g_pixmap, $g_mask) = gtkcreate_png("gmon.png");
-my ($c_pixmap, $c_mask) = gtkcreate_png("categ.png");
-
-# a pixmap widget to contain the pixmap
-my $pixmap = new Gtk::Pixmap($h_pixmap, $h_mask);
-
-### menus definition
-# the menus are not shown
-# but they provides shiny shortcut like C-q
-my @menu_items = ( { path => _("/_File"), type => '<Branch>' },
-		   { path => _("/File/_Quit"), accelerator => _("<control>Q"), callback    => sub { $::isEmbedded ? kill(USR1, $::CCPID) : Gtk->exit(0) } },
-		 );
-my $menubar = get_main_menu( $window );
-######### menus end
-
-my $user_combo = new Gtk::Combo;
-$user_combo->set_popdown_strings(@usernames);
-$user_combo->entry->set_text($auto_mode{autologin}) if ($auto_mode{autologin});
-my $desktop_combo =new Gtk::Combo;
-$desktop_combo->set_popdown_strings(get_wm());
-$desktop_combo->entry->set_text($auto_mode{desktop}) if ($auto_mode{desktop});
-my $a_c_button = new Gtk::RadioButton (_("NewStyle Categorizing Monitor"));
-my $a_h_button = new Gtk::RadioButton _("NewStyle Monitor"), $a_c_button;
-my $a_v_button = new Gtk::RadioButton _("Traditional Monitor"), $a_c_button;
-my $a_g_button = new Gtk::RadioButton _("Traditional Gtk+ Monitor"),$a_c_button ;
-my $a_button = new Gtk::CheckButton(_("Launch Aurora at boot time"));
-my $a_box = new Gtk::VBox(0, 0);
-my $x_box = new Gtk::VBox(0, 0);
-gtkadd($window,
-       gtkpack__ (my $global_vbox = new Gtk::VBox(0,0),
-		  gtkadd (new Gtk::Frame (_("Lilo/grub mode")),
-			  gtkpack__(new Gtk::HBox(0, 0),
-				    _("You are currently using %s as Boot Manager.
-Click on Configure to launch the setup wizard.", $lilogrub),
-				    gtksignal_connect(new Gtk::Button (_("Configure")), clicked => \&lilo_choice)
-				   )
-			 ),
-		  # aurora
-		  gtkadd (new Gtk::Frame (_("Boot mode")),
-			  gtkpack__ (new Gtk::HBox(0,0),
-				     gtkpack__ (new Gtk::VBox(0, 5),
-						gtksignal_connect ($a_button, clicked => sub {
-								       if ($inmain) {
-									   $a_box->set_sensitive(!$a_mode);
-									   $a_mode = !$a_mode;
-									   if ($a_mode) {
-									       $pixmap->set($c_pixmap, $c_mask) if $a_c_button->get_active();
-									       $pixmap->set($h_pixmap, $h_mask) if $a_h_button->get_active();
-									       $pixmap->set($v_pixmap, $v_mask) if $a_v_button->get_active();
-									       $pixmap->set($g_pixmap, $g_mask) if $a_g_button->get_active();
-									   } else {
-									       $pixmap->set($t_pixmap, $t_mask);
-									   }
-										   }
-								   }),
-						gtkpack__ ( gtkset_sensitive ($a_box, $a_mode),
-							    gtksignal_connect ($a_c_button,clicked => sub{$pixmap->set($c_pixmap, $c_mask)}),
-							    gtksignal_connect ($a_h_button,clicked => sub{$pixmap->set($h_pixmap, $h_mask)}),
-							    gtksignal_connect ($a_v_button,clicked => sub{$pixmap->set($v_pixmap, $v_mask)}),
-							    gtksignal_connect ($a_g_button,clicked => sub{$pixmap->set($g_pixmap, $g_mask)})
-							  )
-					      ),
-				     gtkpack__ (new Gtk::HBox(0,0), $pixmap)
-				    )
-			 ),
-		  # X
-		  gtkadd (new Gtk::Frame (_("System mode")),
-			  gtkpack__ (new Gtk::VBox(0, 5),
-				     gtksignal_connect(gtkset_active(new Gtk::CheckButton (_("Launch the X-Window system at start")), $x_mode ), clicked => sub {
-							   $x_box->set_sensitive(!$x_mode);
-							   $x_mode = !$x_mode;
-						       }),
-				     gtkpack__ (gtkset_sensitive ($x_box, $x_mode),
-						gtkset_active($x_no_button  = new Gtk::RadioButton (_("No, I don't want autologin")), !$l_mode),
-						gtkpack__ (new Gtk::HBox(0, 10),
-							   gtkset_active($x_yes_button = new Gtk::RadioButton((_("Yes, I want autologin with this (user, desktop)")), $x_no_button), $l_mode),
-							   gtkpack__ (new Gtk::VBox(0, 10),
-								      $user_combo,
-								      $desktop_combo
-								     )
-							  )
-					       )
-				    )
-			 ),
-		 gtkadd (gtkset_layout(new Gtk::HButtonBox,-end),
-			 gtksignal_connect(new Gtk::Button (_("OK")), clicked=>sub{updateInit();updateAutologin();updateAurora();$::isEmbedded ? kill(USR1,$::CCPID) : Gtk->exit(0)}),
-			 gtksignal_connect(new Gtk::Button ($::isEmbedded ? _("Cancel") : _("Quit")), clicked => sub {$::isEmbedded ? kill(USR1, $::CCPID) : Gtk->exit(0)})
-			)
-	       )
-      );
-
-$a_button->set_active($a_mode); # up == false == "0"
-if ($a_mode) {
-    my $a = readlink "/etc/aurora/Monitor";
-    $a =~ s#/lib/aurora/Monitors/##;
-    if ($a eq "NewStyle-Categorizing-WsLib") {$a_c_button->set_active(1);  $pixmap->set($c_pixmap, $c_mask);}
-    if ($a eq "NewStyle-WsLib") {$a_h_button->set_active(1);  $pixmap->set($h_pixmap, $h_mask);}
-    if ($a eq "Traditional-WsLib") {$a_v_button->set_active(1); $pixmap->set($v_pixmap, $v_mask);}  
-    if ($a eq "Traditional-Gtk+") {$a_g_button->set_active(1); $pixmap->set($g_pixmap, $g_mask);}
-} else {
-    $pixmap->set($t_pixmap, $t_mask);
-}
-
-$window->show_all();
-Gtk->main_iteration while Gtk->events_pending;
-$::isEmbedded and kill USR2, $::CCPID;
-$inmain=1;
-Gtk->main;
-Gtk->exit(0);
-
-#-------------------------------------------------------------
-# get user names to put in combo  
-#-------------------------------------------------------------
-
-sub parse_etc_passwd
-{
-    my ($uname, $uid);
-    setpwent();
-    do {
-	@user_info = getpwent();
-	($uname, $uid) = @user_info[0,2];
-         push (@usernames, $uname) if ($uid > 500);
-    } while (@user_info);
-}
-
-sub get_wm
-{
-    @winm = (split (' ', `/usr/sbin/chksession -l`));
-}
-
-#-------------------------------------------------------------
-# menu callback functions
-#-------------------------------------------------------------
-
-sub print_hello {
-  print( "mcdtg !\n" );
-}
-
-sub get_main_menu {
-  my ( $window ) = @_;
-
-  my $accel_group = new Gtk::AccelGroup();
-  my $item_factory = new Gtk::ItemFactory( 'Gtk::MenuBar', '<main>', $accel_group );
-  $item_factory->create_items( @menu_items );
-  $window->add_accel_group( $accel_group );
-  return ( $item_factory->get_widget( '<main>' ) );
-}
-
-#-------------------------------------------------------------
-# launch X functions
-#-------------------------------------------------------------
-
-sub isXlaunched {
-    my $line;
-    open INITTAB, "/etc/inittab" or die _("can not open /etc/inittab for reading: %s", $!);
-    while (<INITTAB>) {
-	if (/id:([1-6]):initdefault:/) { $line = $_; last; }
-    }
-    close INITTAB;
-    $line =~ s/id:([1-6]):initdefault:/$1/;
-    return ($line-3);
-}
-
-sub updateInit {
-    my $runlevel = ($x_mode) ? 5 : 3;
-    substInFile { s/^id:\d:initdefault:\s*$/id:$runlevel:initdefault:\n/ } "/etc/inittab";
-}
-
-#-------------------------------------------------------------
-# aurora functions
-#-------------------------------------------------------------
-
-
-
-sub updateAurora {
-    if ($a_mode) {
-        if ($a_c_button->get_active()) {
-            symlinkf("/lib/aurora/Monitors/NewStyle-Categorizing-WsLib",    "/etc/aurora/Monitor");
-            $in->do_pkgs->install(q(Aurora-Monitor-NewStyle-Categorizing-WsLib)) if !(-e "/lib/aurora/Monitors/NewStyle-Categorizing-WsLib");
-        }
-        if ($a_h_button->get_active()) {
-            symlinkf("/lib/aurora/Monitors/NewStyle-WsLib",    "/etc/aurora/Monitor");
-            $in->do_pkgs->install(q(Aurora-Monitor-NewStyle-WsLib)) if !(-e "/lib/aurora/Monitors/NewStyle-WsLib");
-        }
-        if ($a_v_button->get_active()) {
-            symlinkf("/lib/aurora/Monitors/Traditional-WsLib", "/etc/aurora/Monitor");
-            $in->do_pkgs->install(q(Aurora-Monitor-Traditional-WsLib)) if !(-e "/lib/aurora/Monitors/Traditional-WsLib");
-        }
-        if ($a_g_button->get_active()) {
-            symlinkf("/lib/aurora/Monitors/Traditional-Gtk+",  "/etc/aurora/Monitor");
-            $in->do_pkgs->install(q(Aurora-Monitor-Traditional-Gtk+)) if !(-e "/lib/aurora/Monitors/Traditional-Gtk+");
-	}
-    } else {
-	unlink "/etc/aurora/Monitor";
-    }
-    
-}
-
-#-------------------------------------------------------------
-# launch autologin functions
-#-------------------------------------------------------------
-
-sub isAutologin {
-    my $line;
-    open AUTOLOGIN, "/etc/sysconfig/autologin";
-    while (<AUTOLOGIN>) {
-	if (/AUTOLOGIN=(yes|no)/) { $line = $_; last; }
-    }
-    close AUTOLOGIN;
-    $line =~ s/AUTOLOGIN=(yes|no)/$1/;
-    chomp ($line);
-    $line =  ($line eq "yes");
-    my %au = get_autologin('');
-    return ($line && defined $au{autologin});
-}
-
-sub get_autologin {
-    my ($prefix) = @_;
-    my %o;
-    my %l = getVarsFromSh("$prefix/etc/sysconfig/autologin");
-
-    $o{autologin} = $l{USER};
-    %l = getVarsFromSh("$prefix/etc/sysconfig/desktop");
-    $o{desktop} = $l{DESKTOP};
-    %o;
-}
-
-sub updateAutologin {
-    my ($usern,$deskt)=($user_combo->entry->get_text(), $desktop_combo->entry->get_text());
-    if ($x_yes_button->get_active()) {
-	$in->do_pkgs->install('autologin') if $x_mode;
-	set_autologin('',$usern,$deskt);
-    } else {
-	set_autologin('',undef) if ($x_no_button->get_active());
-    }
-}
- 
-sub set_autologin {
-  my ($prefix, $user, $desktop) = @_;
-  output "$prefix/etc/sysconfig/desktop", uc($desktop), "\n" if $user;
-  setVarsInSh("$prefix/etc/sysconfig/autologin",
-	      { USER => $user, AUTOLOGIN => bool2yesno($user), EXEC => "/usr/X11R6/bin/startx" });
-  chmod 0600, "$prefix/etc/sysconfig/autologin";
-#  log::l("cat $prefix/etc/sysconfig/autologin: ", cat_("$prefix/etc/sysconfig/autologin"));
-}
-
-
-#-------------------------------------------------------------
-# lilo/grub functions
-#-------------------------------------------------------------
-sub lilo_choice {
-    my $bootloader = bootloader::read('', '/etc/lilo.conf');
-    local ($_) = `detectloader`;
-    $bootloader->{methods} = { lilo => 1, grub => !!/grub/i };
-    
-    my ($all_hds) = catch_cdie { fsedit::hds([ detect_devices::hds() ], {}) } sub { 1 };
-    my $fstab = [ fsedit::get_all_fstab($all_hds) ];
-    fs::merge_info_from_fstab($fstab);
- 
-    $::expert=1;
-  ask:
-    local $::isEmbedded = 0;
-    any::setupBootloader($in, $bootloader, $all_hds, $fstab, $ENV{SECURE_LEVEL}) or return;
-    eval { bootloader::install('', $bootloader, $fstab, $all_hds->{hds}) };  
-    if ($@) {
-	$in->ask_warn('', 
-		      [ _("Installation of LILO failed. The following error occured:"),
-			grep { !/^Warning:/ } cat_("/tmp/.error") ]);
-	unlink "/tmp/.error";
-	goto ask;
-    }
-}
diff --git a/perl-install/c.pm b/perl-install/c.pm
deleted file mode 100644
index aa03b9b1e..000000000
--- a/perl-install/c.pm
+++ /dev/null
@@ -1,19 +0,0 @@
-package c; # $Id$
-
-use vars qw($AUTOLOAD);
-
-use c::stuff;
-use MDK::Common;
-
-sub AUTOLOAD {
-    $AUTOLOAD =~ /::(.*)/;
-    my @l = eval { &{$c::stuff::{$1}} };
-    if (my $err = $@) {
-	$err =~ /Undefined subroutine &main::/ ?
-	  die("can't find function $AUTOLOAD\n" . backtrace()) :
-	  die($err);	
-    }
-    wantarray ? @l : $l[0];
-}
-
-1;
diff --git a/perl-install/c/.cvsignore b/perl-install/c/.cvsignore
deleted file mode 100644
index 665b57e54..000000000
--- a/perl-install/c/.cvsignore
+++ /dev/null
@@ -1,9 +0,0 @@
-Makefile
-Makefile_c
-stuff.c
-stuff.bs
-pm_to_blib
-Makefile_c.old
-blib
-stuff.xs
-pcmcia_probe.c
diff --git a/perl-install/c/Makefile b/perl-install/c/Makefile
deleted file mode 100644
index e58cab335..000000000
--- a/perl-install/c/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-.PHONY: clean
-
-C_RPM = 1
-C_DRAKX = 1
-
-stuff: %: %.xs
-	test -e Makefile_c || C_RPM=$(C_RPM) C_DRAKX=$(C_DRAKX) perl Makefile.PL
-	$(MAKE) -f Makefile_c LD_RUN_PATH=
-	rm -f ../auto/c ; ln -s ../c/blib/arch/auto ../auto/c
-
-clean:
-	test ! -e Makefile_c || $(MAKE) -f Makefile_c clean
-	rm -f *~ *.o stuff.xs pcmcia_probe.c
-
-stuff.xs: %: %.pm
-	rm -f $@
-	C_RPM=$(C_RPM) C_DRAKX=$(C_DRAKX) perl $< > $@
-	chmod a-w $@
diff --git a/perl-install/c/Makefile.PL b/perl-install/c/Makefile.PL
deleted file mode 100644
index e4d13859a..000000000
--- a/perl-install/c/Makefile.PL
+++ /dev/null
@@ -1,23 +0,0 @@
-use ExtUtils::MakeMaker;
-use Config;
-# See lib/ExtUtils/MakeMaker.pm for details of how to influence
-# the contents of the Makefile that is written.
-
-my $libs = '-lldetect -lext2fs';
-$libs .= ' -L/usr/X11R6/lib -lX11 -lgdk -lXxf86misc' if $ENV{C_DRAKX};
-$libs .= ' -lrpm -lrpmdb -lrpmio -lz' if $ENV{C_RPM};
-
-my $pcmcia_dir = $ENV{C_DRAKX} && $Config{archname} =~ /i.86/ ? '../../mdk-stage1/pcmcia' : '';
-
-symlink "$pcmcia_dir/pcmcia_probe.c", "pcmcia_probe.c" if $pcmcia_dir;
-
-WriteMakefile(
-    'NAME'	=> 'stuff',
-    'OPTIMIZE'  => '-Os',
-    'MAKEFILE'  => 'Makefile_c',
-    'OBJECT'    => "stuff.o smp.o sbus.o silo.o" . ($pcmcia_dir && " pcmcia_probe.o"),
-    'VERSION_FROM' => 'stuff.pm', # finds $VERSION
-    'LIBS'	=> [$libs],   # e.g., '-lm' 
-    'DEFINE'	=> '',     # e.g., '-DHAVE_SOMETHING' 
-    'INC'	=> "-I/usr/include/rpm `gtk-config --cflags` `glib-config --cflags`" . ($pcmcia_dir && " -I$pcmcia_dir -I$pcmcia_dir/.."), 
-);
diff --git a/perl-install/c/README b/perl-install/c/README
deleted file mode 100644
index b5ad1224f..000000000
--- a/perl-install/c/README
+++ /dev/null
@@ -1,3 +0,0 @@
-md5.c, md5_crypt.c and md5.h are taken from pam (dir modules/pam_pwdb)
-
-smp.c is taken from RedHat's install
diff --git a/perl-install/c/sbus.c b/perl-install/c/sbus.c
deleted file mode 100644
index 85d44fa79..000000000
--- a/perl-install/c/sbus.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/* This file is inspired from source code of kudzu from Red Hat, Inc.
- * It has been modified to keep only "what is needed" in C, the prom_walk
- * has been rewritten in perl for convenience :-)
- *
- * Copyright notice from original version.
- * sbus.c: Probe for Sun SBUS and UPA framebuffers using OpenPROM,
- *         SBUS SCSI and Ethernet cards and SBUS or EBUS audio chips.
- *
- * Copyright (C) 1998, 1999 Jakub Jelinek (jj@ultra.linux.cz)
- *           (C) 1999 Red Hat, Inc.
- * 
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- */
-
-#ifdef __sparc__
-
-#include <fcntl.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/ioctl.h>
-#include <asm/openpromio.h>
-
-static char *promdev = "/dev/openprom";
-static int promfd = -1;
-static int prom_current_node;
-#define MAX_PROP        128
-#define MAX_VAL         (4096-128-4)
-static char buf[4096];
-#define DECL_OP(size) struct openpromio *op = (struct openpromio *)buf; op->oprom_size = (size)
-
-int prom_open()
-{
-    int prom_root_node;
-
-    if (promfd == -1) {
-        promfd = open(promdev, O_RDONLY);
-	if (promfd == -1)
-	    return 0;
-    }
-    prom_root_node = prom_getsibling(0);
-    if (!prom_root_node) {
-        close(promfd);
-	promfd = -1;
-	return 0;
-    }
-    return prom_root_node;
-}
-
-void prom_close()
-{
-    if (promfd != -1) {
-        close(promfd);
-	promfd = -1;
-    }
-}
-
-int prom_getsibling(int node)
-{
-    DECL_OP(sizeof(int));
-        
-    if (node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMNEXT, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-int prom_getchild(int node)
-{
-    DECL_OP(sizeof(int));
-        
-    if (!node || node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMCHILD, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-char *prom_getopt(char *var, int *lenp)
-{
-    DECL_OP(MAX_VAL);
-        
-    strcpy (op->oprom_array, var);
-    if (ioctl (promfd, OPROMGETOPT, op) < 0)
-        return 0;
-    if (lenp) *lenp = op->oprom_size;
-    return op->oprom_array;
-}
-
-void prom_setopt(char *var, char *value) {
-    DECL_OP(MAX_VAL);
-
-    strcpy (op->oprom_array, var);
-    strcpy (op->oprom_array + strlen (var) + 1, value);
-    ioctl (promfd, OPROMSETOPT, op);
-}
-
-char *prom_getproperty(char *prop, int *lenp)
-{
-    DECL_OP(MAX_VAL);
-        
-    strcpy (op->oprom_array, prop);
-    if (ioctl (promfd, OPROMGETPROP, op) < 0)
-        return 0;
-    if (lenp) *lenp = op->oprom_size;
-    return op->oprom_array;
-}
-
-int prom_getbool(char *prop)
-{
-    DECL_OP(0);
-
-    *(int *)op->oprom_array = 0;
-    for (;;) {
-        op->oprom_size = MAX_PROP;
-	if (ioctl(promfd, OPROMNXTPROP, op) < 0)
-	    return 0;
-	if (!op->oprom_size)
-	    return 0;
-	if (!strcmp (op->oprom_array, prop))
-	    return 1;
-    }
-}
-
-int prom_pci2node(int bus, int devfn) {
-    DECL_OP(2*sizeof(int));
-    
-    ((int *)op->oprom_array)[0] = bus;
-    ((int *)op->oprom_array)[1] = devfn;
-    if (ioctl (promfd, OPROMPCI2NODE, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-#else
-int prom_open() { return 0; }
-void prom_close() {}
-int prom_getsibling(int node) { return 0; }
-int prom_getchild(int node) { return 0; }
-char *prom_getopt(char *var, int *lenp) { return 0; /* NULL */ }
-void prom_setopt(char *var, char *value) {}
-char *prom_getproperty(char *prop, int *lenp) { return 0; /* NULL */ }
-int prom_getbool(char *prop) { return 0; }
-int prom_pci2node(int bus, int devfn) { return 0; }
-#endif /* __sparc__ */
diff --git a/perl-install/c/silo.c b/perl-install/c/silo.c
deleted file mode 100644
index 2fd621f4e..000000000
--- a/perl-install/c/silo.c
+++ /dev/null
@@ -1,817 +0,0 @@
-/* silo.c: Conversions between SCSI and IDE disk names
- *	   and OpenPROM fully qualified paths.
- *
- * Modified for DrakX light integration.
- * Copyright (C) 1999, 2000 Jakub Jelinek <jakub@redhat.com>
- * 
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifdef __sparc__
-
-#define _GNU_SOURCE
-#include <fcntl.h>
-#include <stdio.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/ioctl.h>
-#include <asm/openpromio.h>
-#include <ctype.h>
-#include <dirent.h>
-#include <errno.h>
-#include <sys/stat.h>
-#include <sys/utsname.h>
-
-#ifndef OPROMSETCUR
-#define OPROMSETCUR	0x20004FF0
-#define OPROMPCI2NODE	0x20004FF1
-#define OPROMPATH2NODE	0x20004FF2
-#endif
-
-static int hasaliases;
-static char *promdev = "/dev/openprom";
-static int promfd;
-static char sd_targets[10] = "31204567";
-static int p1275 = 0;
-static int prom_root_node, prom_current_node;
-static int promvers;
-static void (*prom_walk_callback)(int node);
-static char prom_path[1024];
-#define MAX_PROP	128
-#define MAX_VAL		(4096-128-4)
-static char buf[4096];
-static char regstr[40];
-#define DECL_OP(size) struct openpromio *op = (struct openpromio *)buf; op->oprom_size = (size)
-
-static int
-prom_setcur(int node) {
-    DECL_OP(sizeof(int));
-    
-    if (node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMSETCUR, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-static int
-prom_getsibling(int node) {
-    DECL_OP(sizeof(int));
-    
-    if (node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMNEXT, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-static int
-prom_getchild(int node) {
-    DECL_OP(sizeof(int));
-    
-    if (!node || node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMCHILD, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-static char *
-prom_getproperty(char *prop, int *lenp) {
-    DECL_OP(MAX_VAL);
-    
-    strcpy (op->oprom_array, prop);
-    if (ioctl (promfd, OPROMGETPROP, op) < 0)
-        return 0;
-    if (lenp) *lenp = op->oprom_size;
-    return op->oprom_array;
-}
-
-static char *
-prom_getopt(char *var, int *lenp) {
-    DECL_OP(MAX_VAL);
-
-    strcpy (op->oprom_array, var);
-    if (ioctl (promfd, OPROMGETOPT, op) < 0)
-        return 0;
-    if (lenp) *lenp = op->oprom_size;
-    return op->oprom_array;
-}
-
-static void
-prom_setopt(char *var, char *value) {
-    DECL_OP(MAX_VAL);
-
-    strcpy (op->oprom_array, var);
-    strcpy (op->oprom_array + strlen (var) + 1, value);
-    ioctl (promfd, OPROMSETOPT, op);
-}
-
-static int
-prom_getbool(char *prop) {
-    DECL_OP(0);
-
-    *(int *)op->oprom_array = 0;
-    for (;;) {
-        op->oprom_size = MAX_PROP;
-            if (ioctl(promfd, OPROMNXTPROP, op) < 0)
-                return 0;
-            if (!op->oprom_size)
-                return 0;
-            if (!strcmp (op->oprom_array, prop))
-                return 1;
-    }
-}
-
-static int
-prom_pci2node(int bus, int devfn) {
-    DECL_OP(2*sizeof(int));
-    
-    ((int *)op->oprom_array)[0] = bus;
-    ((int *)op->oprom_array)[1] = devfn;
-    if (ioctl (promfd, OPROMPCI2NODE, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-static int
-prom_path2node(char *path) {
-    DECL_OP(MAX_VAL);
-    
-    strcpy (op->oprom_array, path);
-    if (ioctl (promfd, OPROMPATH2NODE, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-#define PW_TYPE_SBUS	1
-#define PW_TYPE_PCI	2
-#define PW_TYPE_EBUS	3
-
-static void
-prom_walk(char *path, int parent, int node, int type) {
-    int nextnode;
-    int len, ntype = type;
-    char *prop;
-    
-    prop = prom_getproperty("name", &len);
-    if (prop && len > 0) {
-        if ((!strcmp(prop, "sbus") || !strcmp(prop, "sbi")) && !type)
-            ntype = PW_TYPE_SBUS;
-        else if (!strcmp(prop, "ebus") && type == PW_TYPE_PCI)
-            ntype = PW_TYPE_EBUS;
-        else if (!strcmp(prop, "pci") && !type)
-            ntype = PW_TYPE_PCI;
-    }
-    *path = '/';
-    strcpy (path + 1, prop);
-    prop = prom_getproperty("reg", &len);
-    if (prop && len >= 4) {
-        unsigned int *reg = (unsigned int *)prop;
-        int cnt = 0;
-        if (!p1275 || (type == PW_TYPE_SBUS))
-	    sprintf (regstr, "@%x,%x", reg[0], reg[1]);
-        else if (type == PW_TYPE_PCI) {
-	    if ((reg[0] >> 8) & 7)
-		sprintf (regstr, "@%x,%x", (reg[0] >> 11) & 0x1f, (reg[0] >> 8) & 7);
-	    else
-		sprintf (regstr, "@%x", (reg[0] >> 11) & 0x1f);
-        } else if (len == 4)
-	    sprintf (regstr, "@%x", reg[0]);
-        else {
-	    unsigned int regs[2];
-
-	    /* Things get more complicated on UPA. If upa-portid exists,
-	       then address is @upa-portid,second-int-in-reg, otherwise
-	       it is @first-int-in-reg/16,second-int-in-reg (well, probably
-	       upa-portid always exists, but just to be safe). */
-	    memcpy (regs, reg, sizeof(regs));
-	    prop = prom_getproperty("upa-portid", &len);
-	    if (prop && len == 4) {
-		reg = (unsigned int *)prop;
-		sprintf (regstr, "@%x,%x", reg[0], regs[1]); 
-	    } else
-	        sprintf (regstr, "@%x,%x", regs[0] >> 4, regs[1]);
-	}
-        for (nextnode = prom_getchild(parent); nextnode; nextnode = prom_getsibling(nextnode)) {
-	    prop = prom_getproperty("name", &len);
-	    if (prop && len > 0 && !strcmp (path + 1, prop))
-		cnt++;
-	}
-        if (cnt > 1)
-	    strcat (path, regstr);
-    }
-
-    prom_walk_callback(node);
-
-    nextnode = prom_getchild(node);
-    if (nextnode)
-        prom_walk(strchr (path, 0), node, nextnode, ntype);
-    nextnode = prom_getsibling(node);
-    if (nextnode)
-        prom_walk(path, parent, nextnode, type);
-}
-
-static int
-prom_init(int mode) {    
-    struct utsname u;
-
-    promfd = open(promdev, mode);
-    if (promfd == -1)
-	return -1;
-    prom_root_node = prom_getsibling(0);
-    if (!prom_root_node)
-	return -1;
-
-    if (!uname (&u) && !strcmp (u.machine, "sparc64"))
-	p1275 = 1;
-    return 0;
-}
-
-#define SDSK_TYPE_IDE	1
-#define SDSK_TYPE_SD	2
-#define SDSK_TYPE_PLN	3
-#define SDSK_TYPE_FC	4
-
-static struct sdsk_disk {
-    unsigned int prom_node;
-    unsigned int type, host, hi, mid, lo;
-    unsigned char *prom_name;
-} *hd = NULL, *sd = NULL;
-static int hdlen, sdlen;
-
-static void
-scan_walk_callback(int node) {
-    int nextnode;
-    char *prop;
-    int len, disk;
-    static int v0ctrl = 0;
-
-    for (disk = 0; disk < hdlen + sdlen; disk++) {
-	if (hd[disk].prom_node == node) {
-	    switch (hd[disk].type) {
-	    case SDSK_TYPE_IDE:
-		for (nextnode = prom_getchild(node); nextnode; nextnode = prom_getsibling(nextnode)) {
-		    prop = prom_getproperty("name", &len);
-		    if (prop && len > 0 && (!strcmp (prop, "ata") || !strcmp (prop, "disk")))
-			break;
-		}
-		if (!nextnode)
-		    continue;
-		if (prop[0] == 'a')
-		    sprintf (prop, "/ata@%x,0/cmdk@%x,0", hd[disk].hi, hd[disk].lo);
-		else
-		    sprintf (prop, "/disk@%x,0", hd[disk].hi * 2 + hd[disk].lo);
-		break;
-	    case SDSK_TYPE_SD:
-		for (nextnode = prom_getchild(node); nextnode; nextnode = prom_getsibling(nextnode)) {
-		    prop = prom_getproperty("compatible", &len);
-		    if (prop && len > 0 && !strcmp (prop, "sd"))
-			break;
-		    prop = prom_getproperty("name", &len);
-		    if (prop && len > 0 && (!strcmp (prop, "sd") || !strcmp (prop, "disk")))
-			break;
-		}
-		if (!nextnode || hd[disk].hi)
-		    continue;
-		if (promvers) {
-		    char name[1024];
-		    prop = prom_getproperty("name", &len);
-		    if (prop && len > 0)
-			strcpy (name, prop);
-		    else
-			strcpy (name, "sd");
-		    if (!prop)
-			prop = ((struct openpromio *)buf)->oprom_array;
-		    sprintf (prop, "/%s@%x,%x", name, hd[disk].mid, hd[disk].lo);
-		} else {
-		    int i;
-		    for (i = 0; sd_targets[i]; i++)
-			if (sd_targets[i] == '0' + hd[disk].mid)
-			    break;
-		    if (!sd_targets[i])
-			i = hd[disk].mid;
-		    sprintf (prop, "sd(%d,%d,", v0ctrl, i);
-		}
-		break;
-	    case SDSK_TYPE_PLN:
-		prop = ((struct openpromio *)buf)->oprom_array;
-		sprintf (prop, "/SUNW,pln@%x,%x/SUNW,ssd@%x,%x",
-			 hd[disk].lo & 0xf0000000, hd[disk].lo & 0xffffff,
-			 hd[disk].hi, hd[disk].mid);
-		break;
-	    case SDSK_TYPE_FC:
-		prop = ((struct openpromio *)buf)->oprom_array;
-		sprintf (prop, "/sf@0,0/ssd@w%08x%08x,%x", hd[disk].hi, hd[disk].mid, hd[disk].lo);
-		break;
-	    default:
-		continue;
-	    }
-	    hd[disk].prom_name = malloc (strlen (prom_path) + strlen(prop) + 3);
-	    if (!hd[disk].prom_name)
-		continue;
-	    if (promvers)
-		strcpy (hd[disk].prom_name, prom_path);
-	    else
-		hd[disk].prom_name[0] = '\0';
-	    strcat (hd[disk].prom_name, prop);
-	}
-    }
-    v0ctrl++;
-}
-
-static int
-scan_ide(void) {
-    DIR * dir;
-    char path[80];
-    char buffer[512];
-    int fd, i, disk;
-    struct dirent * ent;
-    int pci_bus, pci_devfn;
-
-    if (access("/proc/ide", R_OK)) return 0;
-
-    if (!(dir = opendir("/proc/ide"))) {
-	return 1;
-    }
-
-    while ((ent = readdir(dir))) {
-	if (ent->d_name[0] == 'h' && ent->d_name[1] == 'd' &&
-	    ent->d_name[2] >= 'a' && ent->d_name[2] <= 'z' &&
-	    ent->d_name[3] == '\0') {
-	    disk = ent->d_name[2] - 'a';
-	    if (disk >= hdlen) {
-		hd = (struct sdsk_disk *)realloc(hd, ((disk&~3)+4)*sizeof(struct sdsk_disk));
-		memset (hd + hdlen, 0, ((disk&~3)+4-hdlen)*sizeof(struct sdsk_disk));
-		hdlen = (disk&~3)+4;
-	    }
-	    for (i = (disk & ~3); i <= (disk | 3); i++) {
-		if (hd[i].type)
-		    break;
-	    }
-	    if (i > (disk | 3)) {
-		sprintf(path, "/proc/ide/%s", ent->d_name);
-		if (readlink(path, buffer, 512) < 5)
-		    continue;
-		if (strncmp(buffer, "ide", 3) ||
-		    !isdigit(buffer[3]) ||
-		    buffer[4] != '/')
-		    continue;
-		buffer[4] = 0;
-		sprintf(path, "/proc/ide/%s/config", buffer);
-		if ((fd = open(path, O_RDONLY)) < 0)
-		    continue;
-		i = read(fd, buffer, 50);
-		close(fd);
-		if (i < 50) continue;
-		if (sscanf (buffer, "pci bus %x device %x ",
-			    &pci_bus, &pci_devfn) != 2)
-			continue;
-		hd[disk].prom_node = prom_pci2node (pci_bus, pci_devfn);
-	    } else
-	    	hd[disk].prom_node = hd[i].prom_node;
-	    hd[disk].type = SDSK_TYPE_IDE;
-	    hd[disk].hi = (disk & 2) >> 1;
-	    hd[disk].lo = (disk & 1);
-	}
-    }
-
-    closedir(dir);
-
-    return 0;
-}
-
-static int
-scan_scsi(void) {
-    FILE *f;
-    DIR * dir, *dirhba;
-    struct dirent * ent, *enthba;
-    struct stat st;
-    char * p, * q;
-    char buf[512];
-    char path[128];
-    int disk = 0;
-    int host, channel, id, lun;
-    int prom_node, pci_bus, pci_devfn;
-
-    if (access("/proc/scsi/scsi", R_OK)) {
-	return 0;
-    }
-
-    f = fopen("/proc/scsi/scsi", "r");
-    if (f == NULL) return 1;
-
-    if (fgets(buf, sizeof(buf), f) == NULL) {
-	fclose(f);
-	return 1;
-    }
-    if (!strcmp(buf, "Attached devices: none\n")) {
-	fclose(f);
-	return 0;
-    }
-
-    while (fgets(buf, sizeof(buf), f) != NULL) {
-	if (sscanf(buf, "Host: scsi%d Channel: %d Id: %d Lun: %d\n",
-		   &host, &channel, &id, &lun) != 4)
-	    break;
-	if (fgets(buf, sizeof(buf), f) == NULL)
-	    break;
-	if (strncmp(buf, "  Vendor:", 9))
-	    break;
-	if (fgets(buf, sizeof(buf), f) == NULL)
-	    break;
-	if (strncmp(buf, "  Type:   ", 10))
-	    break;
-	if (!strncmp(buf+10, "Direct-Access", 13)) {
-	    if (disk >= sdlen) {
-		hd = (struct sdsk_disk *)
-		     realloc(hd, (hdlen+(disk&~3)+4)*sizeof(struct sdsk_disk));
-		sd = hd + hdlen;
-		memset (sd + sdlen, 0,
-			((disk&~3)+4-sdlen)*sizeof(struct sdsk_disk));
-		sdlen = (disk&~3)+4;
-	    }
-	    sd[disk].type = SDSK_TYPE_SD;
-	    sd[disk].host = host;
-	    sd[disk].hi = channel;
-	    sd[disk].mid = id;
-	    sd[disk].lo = lun;
-	    disk++;
-	}
-    }
-    fclose (f);
-
-    if (!(dir = opendir("/proc/scsi"))) {
-	if (!hdlen && hd) {
-	    free(hd);
-	    hd = NULL;
-	}
-	sd = NULL;
-	sdlen = 0;
-	return 1;
-    }
-
-    while ((ent = readdir(dir))) {
-	if (!strcmp (ent->d_name, "scsi") || ent->d_name[0] == '.')
-	    continue;
-	sprintf (path, "/proc/scsi/%s", ent->d_name);
-	if (stat (path, &st) < 0 || !S_ISDIR (st.st_mode))
-	    continue;
-	if (!(dirhba = opendir(path)))
-	    continue;
-
-	while ((enthba = readdir(dirhba))) {
-	    if (enthba->d_name[0] == '.')
-		continue;
-	    host = atoi(enthba->d_name);
-	    sprintf (path, "/proc/scsi/%s/%s", ent->d_name, enthba->d_name);
-	    f = fopen (path, "r");
-	    if (f == NULL) continue;
-
-	    if (!strcmp (ent->d_name, "esp") ||
-		!strcmp (ent->d_name, "qlogicpti") ||
-		!strcmp (ent->d_name, "fcal"))
-		p = "PROM node";
-	    else if (!strcmp (ent->d_name, "pluto"))
-		p = "serial ";
-	    else
-		p = "PCI bus";
-	    while (fgets (buf, sizeof(buf), f) != NULL) {
-		q = strstr (buf, p);
-		if (q == NULL) continue;
-		prom_node = 0;
-		switch (p[1]) {
-		case 'R':
-		    if (sscanf (q, "PROM node %x", &prom_node) == 1)
-			q = NULL;
-		    break;
-		case 'e':
-		    if (sscanf (q, "serial 000000%x %*dx%*d on soc%*d port %x PROM node %x",
-				&id, &lun, &prom_node) == 3 &&
-			lun >= 10 && lun <= 11) {
-			q = NULL;
-		    }
-		    break;
-		case 'C':
-		    if (sscanf (q, "PCI bus %x device %x", &pci_bus, &pci_devfn) == 2) {
-			q = NULL;
-			prom_node = prom_pci2node (pci_bus, pci_devfn);
-		    }
-		    break;
-		}
-		if (q == NULL) {
-		    for (disk = 0; disk < sdlen; disk++)
-			if (sd[disk].host == host && sd[disk].type) {
-			    sd[disk].prom_node = prom_node;
-			    if (p[1] == 'e') {
-				sd[disk].type = SDSK_TYPE_PLN;
-				sd[disk].lo = (lun << 28) | id;
-			    } else if (!strcmp (ent->d_name, "fcal"))
-				sd[disk].type = SDSK_TYPE_FC;
-			}
-		}
-	    }
-	    if (!strcmp (ent->d_name, "fcal")) {
-		while (fgets (buf, sizeof(buf), f) != NULL) {
-		    unsigned long long ll;
-		    if (sscanf (buf, " [AL-PA: %*x, Id: %d, Port WWN: %Lx, Node WWN: ", &id, &ll) == 2) {
-			for (disk = 0; disk < sdlen; disk++)
-			if (sd[disk].host == host && sd[disk].mid == id) {
-			    sd[disk].hi = ll >> 32;
-			    sd[disk].mid = ll;
-			}
-		    }
-		}
-	    }
-	    fclose(f);
-	}
-	closedir(dirhba);
-    }
-    closedir(dir);
-    return 0;
-}
-
-static int get_prom_ver(void)
-{
-    FILE *f = fopen ("/proc/cpuinfo","r");
-    int ver = 0;
-    char buffer[1024];
-    char *p;
-                    
-    if (f) {
-	while (fgets (buffer, 1024, f)) {
-	    if (!strncmp (buffer, "promlib", 7)) {
-		p = strstr (buffer, "Version ");
-		if (p) {
-		    p += 8;
-		    if (*p == '0' || (*p >= '2' && *p <= '3')) {
-			ver = *p - '0';
-		    }
-		}
-		break;
-	    }
-	}
-	fclose(f);
-    }
-    if (!ver) {
-	int len;
-        p = prom_getopt("sd-targets", &len);
-        if (p && len > 0 && len <= 8)
-	    strcpy(sd_targets, p);
-    }
-    return ver;
-}
-
-static void check_aliases(void) {
-    int nextnode, len;
-    char *prop;
-    hasaliases = 0;
-    for (nextnode = prom_getchild(prom_root_node); nextnode; nextnode = prom_getsibling(nextnode)) {
-	prop = prom_getproperty("name", &len);
-	if (prop && len > 0 && !strcmp (prop, "aliases"))
-	    hasaliases = 1;
-    }
-}
-
-char *prom_root_name = NULL;
-
-static void get_root_name(void) {
-    int len;
-    char *prop;
-    
-    prom_getsibling(0);
-    prop = prom_getproperty("name", &len);
-    if (prop && len > 0)
-	prom_root_name = strdup(prop);
-}
-
-int init_sbusdisk(void) {
-    if (prom_init(O_RDONLY))
-	return -1;
-    promvers = get_prom_ver();
-    check_aliases();
-    get_root_name();
-    scan_ide();
-    scan_scsi();
-    prom_walk_callback = scan_walk_callback;
-    prom_walk(prom_path, prom_root_node, prom_getchild (prom_root_node), 0);
-    close(promfd);
-    return 0;
-}
-
-void set_prom_vars(char *linuxAlias, char *bootDevice) {
-    int len;
-    int aliasDone = 0;
-    if (prom_init(O_RDWR))
-	return;
-    if (linuxAlias && hasaliases) {
-	char *use_nvramrc;
-	char nvramrc[2048];
-	char *p, *q, *r, *s;
-	int enabled = -1;
-	int count;
-
-	use_nvramrc = prom_getopt ("use-nvramrc?", &len);
-	if (len > 0) {
-	    if (!strcasecmp (use_nvramrc, "false"))
-		enabled = 0;
-	    else if (!strcasecmp (use_nvramrc, "true"))
-		enabled = 1;
-	}
-	if (enabled != -1) {
-	    p = prom_getopt ("nvramrc", &len);
-	    if (p) {
-		memcpy (nvramrc, p, len);
-		nvramrc [len] = 0;
-		q = nvramrc;
-		for (;;) {
-		    /* If there is already `devalias linux /some/ugly/prom/path'
-		       make sure we fully understand that and remove it. */
-		    if (!strncmp (q, "devalias", 8) && (q[8] == ' ' || q[8] == '\t')) {
-			for (r = q + 9; *r == ' ' || *r == '\t'; r++);
-			if (!strncmp (r, "linux", 5)) {
-			    for (s = r + 5; *s && *s != ' ' && *s != '\t'; s++);
-			    if (!*s) break;
-			    if (s == r + 5 ||
-				(r[5] == '#' && r[6] >= '0' && r[6] <= '9' &&
-				 (s == r + 7 ||
-				  (r[7] >= '0' && r[7] <= '9' && s == r + 8)))) {
-				for (r = s + 1; *r == ' ' || *r == '\t'; r++);
-				for (; *r && *r != ' ' && *r != '\t' && *r != '\n'; r++);
-				for (; *r == ' ' || *r == '\t'; r++);
-				if (*r == '\n') {
-				    r++;
-				    memmove (q, r, strlen(r) + 1);
-				    continue;
-				}
-			    }
-			}
-		    }
-		    q = strchr (q, '\n');
-		    if (!q) break;
-		    q++;
-		}
-		len = strlen (nvramrc);
-		if (len && nvramrc [len-1] != '\n')
-		    nvramrc [len++] = '\n';
-		p = nvramrc + len;
-		p = stpcpy (p, "devalias linux ");
-		r = linuxAlias;
-		q = strchr (r, ';');
-		count = 1;
-		while (q) {
-		    memcpy (p, r, q - r);
-		    p += q - r;
-		    sprintf (p, "\ndevalias linux#%d ", count++);
-		    p = strchr (p, 0);
-		    r = q + 1;
-		    q = strchr (r, ';');
-		}
-		p = stpcpy (p, r);
-		*p++ = '\n';
-		*p = 0;
-		prom_setopt ("nvramrc", nvramrc);
-		if (!enabled)
-		    prom_setopt ("use-nvramrc?", "true");
-		aliasDone = 1;
-	    }
-	}
-    }
-    if (bootDevice) {
-	char *p;
-	if (aliasDone)
-	    bootDevice = "linux";
-	p = prom_getopt ("boot-device", &len);
-	if (p) {
-	    prom_setopt ("boot-device", bootDevice);
-	    prom_setopt ("boot-file", "");
-	} else {
-	    p = prom_getopt ("boot-from", &len);
-	    if (p)
-		prom_setopt ("boot-from", bootDevice);
-	}
-    }
-    close(promfd);
-}
-
-#ifdef STANDALONE_SILO
-
-int main(void) {
-    int i;
-
-    init_sbusdisk();
-    set_prom_vars ("/sbus@1f,0/espdma/esp/sd@1,0:c;/sbus@1f,0/espdma/esp/sd@1,0:g;/sbus@1f,0/espdma/esp/sd@1,0:h", "linux");
-    printf ("prom root name `%s'\n", prom_root_name);
-    for (i = 0; i < hdlen; i++) {
-	if (hd[i].type)
-		printf ("hd%c %x %d %d %d\n", i + 'a', hd[i].prom_node,
-						    hd[i].hi, hd[i].mid, hd[i].lo);
-	if (hd[i].prom_name) printf ("%s\n", hd[i].prom_name);
-    }
-    for (i = 0; i < sdlen; i++) {
-	if (sd[i].type) {
-	    if (i < 26)
-		printf ("sd%c %x %d %d %d\n", i + 'a', sd[i].prom_node,
-						    sd[i].hi, sd[i].mid, sd[i].lo);
-	    else
-		printf ("sd%c%c %x %d %d %d\n", (i / 26) + 'a' - 1, (i % 26) + 'a', sd[i].prom_node,
-						    sd[i].hi, sd[i].mid, sd[i].lo);
-	}
-	if (sd[i].prom_name) printf ("%s\n", sd[i].prom_name);
-    }
-    exit(0);
-}
-
-#else
-
-void
-initSilo ()
-{
-    return init_sbusdisk();
-}
-
-char *
-disk2PromPath (unsigned char *disk)
-{
-    static unsigned char prompath[1024];
-    int diskno = -1, part;
-
-    if (disk[0] == 'h' && disk[1] == 'd' && disk[2] >= 'a' && disk[2] <= 'z') {
-	diskno = disk[2] - 'a';
-	disk += 3;
-    } else if (disk[0] == 's' && disk[1] == 'd' && disk[2] >= 'a' && disk[2] <= 'z') {
-	if (disk[3] >= 'a' && disk[3] <= 'z') {
-	    diskno = (disk[2] - 'a' + 1) * 26 + (disk[3] - 'a');
-	    disk += 4;
-	} else {
-	    diskno = disk[2] - 'a';
-	    disk += 3;
-	}
-	if (diskno >= 128)
-	    diskno = -1;
-	else
-	    diskno += hdlen;
-    }
-    if (diskno == -1)
-	part = -1;
-    else if (!disk[0])
-	part = 3;
-    else {
-	part = atoi (disk);
-	if (part <= 0 || part > 8) part = -1;
-    }
-    if (diskno < 0 || part == -1 ||
-	diskno >= hdlen + sdlen || !hd[diskno].prom_name) {
-	return NULL;
-    }
-    if (!promvers)
-	sprintf (prompath, "%s%d)", hd[diskno].prom_name, part ? part - 1 : 2);
-    else {
-	if (part)
-	    sprintf (prompath, "%s:%c", hd[diskno].prom_name, part + 'a' - 1);
-	else
-	    strcpy (prompath, hd[diskno].prom_name);
-    }
-    return prompath;
-}
-
-int
-hasAliases (void)
-{
-    return hasaliases;
-}
-
-char *
-promRootName (void)
-{
-    return prom_root_name ? prom_root_name : "";
-}
-
-void
-setPromVars (char *linuxAlias, char *bootDevice)
-{
-    if (linuxAlias && !*linuxAlias) linuxAlias = NULL;
-    if (bootDevice && !*bootDevice) bootDevice = NULL;
-    set_prom_vars (linuxAlias, bootDevice);
-}
-
-#endif
-
-#else
-void initSilo() {}
-char *disk2PromPath(unsigned char *disk) { return 0; /* NULL */ }
-int hasAliases(void) { return 0; }
-char *promRootName(void) { return 0; /* NULL */ }
-void setPromVars(char *linuxAlias, char *bootDevice) {}
-#endif /* __sparc__ */
diff --git a/perl-install/c/smp-test.c b/perl-install/c/smp-test.c
deleted file mode 100644
index f644449b8..000000000
--- a/perl-install/c/smp-test.c
+++ /dev/null
@@ -1,6 +0,0 @@
-main() {
-  if (detectSMP())
-    printf("has smp\n");
-  else
-    printf("no smp\n");
-}
diff --git a/perl-install/c/smp.c b/perl-install/c/smp.c
deleted file mode 100644
index b885de850..000000000
--- a/perl-install/c/smp.c
+++ /dev/null
@@ -1,506 +0,0 @@
-/*
-[_Anarchy_(alan@lightning.swansea.uk.linux.org)] you should do one check
-   though - if the board seems to be SMP and the CPU in /proc/cpuinfo is non
-   intel dont install an SMP kernel - thats a dual pentium board with a cyrix
-   or similar single cpu in it
-*/
-
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/mman.h>
-#include <string.h>
-#include <errno.h>
-
-#ifdef __alpha__
-int alphaDetectSMP(void)
-{
-    int issmp = 0;
-    FILE *f;
-    
-    f = fopen("/proc/cpuinfo", "r");
-    if (f) {     
-	char buff[1024];
-	
-	while (fgets (buff, 1024, f) != NULL) {
-	    if (!strncmp (buff, "cpus detected\t\t: ", 17)) {
-		if (strtoul (buff + 17, NULL, 0) > 1)
-		    issmp = 1;
-		break;
-	    }
-	}
-	fclose(f);
-    } else
-	return -1;
-    
-    return issmp;
-}
-#endif /* __alpha__ */
-
-#ifdef __sparc__
-int sparcDetectSMP(void)
-{
-    int issmp = 0;
-    FILE *f;
-    
-    f = fopen("/proc/cpuinfo", "r");
-    if (f) {     
-	char buff[1024];
-	
-	while (fgets (buff, 1024, f) != NULL) {
-	    if (!strncmp (buff, "ncpus probed\t: ", 15)) {
-		if (strtoul (buff + 15, NULL, 0) > 1)
-		    issmp = 1;
-		break;
-	    }
-	}
-	fclose(f);
-    } else
-	return -1;
-    
-    return issmp;
-}
-#endif /* __sparc__ */
-
-/* just a placeholder for now - don't have an SMP machine
-   need something in place to build - s.benedict */
-
-#ifdef __powerpc__
-int ppcDetectSMP(void)
-{
-    int issmp = 0;
-    FILE *f;
-    
-    f = fopen("/proc/cpuinfo", "r");
-    if (f) {     
-        char buff[1024];
-        
-        while (fgets (buff, 1024, f) != NULL) {
-            if (!strncmp (buff, "ncpus active\t: ", 15)) {
-                if (strtoul (buff + 15, NULL, 0) > 1)
-                    issmp = 1;
-                break;
-            }
-        }
-        fclose(f);
-    } else
-        return -1;
-    
-    return issmp;
-}
-#endif /* __powerpc__ */
-
-#ifdef __i386__
-/*
- * Copyright (c) 1996, by Steve Passe
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. The name of the developer may NOT be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *      $Id$
- */
-
-/*
- * mptable.c
- */
-
-#define VMAJOR                  2
-#define VMINOR                  0
-#define VDELTA                  12
-
-/*
- * this will cause the raw mp table to be dumped to /tmp/mpdump
- *
-#define RAW_DUMP
- */
-
-#define MP_SIG                  0x5f504d5f      /* _MP_ */
-#define EXTENDED_PROCESSING_READY
-#define OEM_PROCESSING_READY_NOT
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <sys/types.h>
-
-#define LINUX 1
-#if LINUX
-typedef unsigned int vm_offset_t;
-#else
-#include <machine/types.h>
-#endif
-
-/* EBDA is @ 40:0e in real-mode terms */
-#define EBDA_POINTER            0x040e          /* location of EBDA pointer */
-
-/* CMOS 'top of mem' is @ 40:13 in real-mode terms */
-#define TOPOFMEM_POINTER        0x0413          /* BIOS: base memory size */
-
-#define DEFAULT_TOPOFMEM        0xa0000
-
-#define BIOS_BASE               0xf0000
-#define BIOS_BASE2              0xe0000
-#define BIOS_SIZE               0x10000
-#define ONE_KBYTE               1024
-
-#define GROPE_AREA1             0x80000
-#define GROPE_AREA2             0x90000
-#define GROPE_SIZE              0x10000
-
-/* MP Floating Pointer Structure */
-typedef struct MPFPS {
-    char        signature[ 4 ];
-    void*       pap;
-    u_char      length;
-    u_char      spec_rev;
-    u_char      checksum;
-    u_char      mpfb1;
-    u_char      mpfb2;
-    u_char      mpfb3;
-    u_char      mpfb4;
-    u_char      mpfb5;
-} mpfps_t;
-
-/* MP Configuration Table Header */
-typedef struct MPCTH {
-    char        signature[ 4 ];
-    u_short     base_table_length;
-    u_char      spec_rev;
-    u_char      checksum;
-    u_char      oem_id[ 8 ];
-    u_char      product_id[ 12 ];
-    void*       oem_table_pointer;
-    u_short     oem_table_size;
-    u_short     entry_count;
-    void*       apic_address;
-    u_short     extended_table_length;
-    u_char      extended_table_checksum;
-    u_char      reserved;
-} mpcth_t;
-
-typedef struct PROCENTRY {
-    u_char      type;
-    u_char      apicID;
-    u_char      apicVersion;
-    u_char      cpuFlags;
-    u_long      cpuSignature;
-    u_long      featureFlags;
-    u_long      reserved1;
-    u_long      reserved2;
-} ProcEntry;
-
-#define PROCENTRY_FLAG_EN       0x01
-
-static void seekEntry( vm_offset_t addr );
-static void apic_probe( vm_offset_t* paddr, int* where );
-static void readEntry( void* entry, int size );
-
-/* global data */
-static int     pfd;            /* physical /dev/mem fd */
-static int     verbose = 0;
-static int     grope = 0;
-
-static int
-readType()
-{
-    u_char      type;
-
-    if ( read( pfd, &type, sizeof( u_char ) ) != sizeof( u_char ) ) {
-        perror( "type read" );
-        fprintf( stderr, "\npfd: %d", pfd );
-        fflush( stderr );
-        exit( 1 );
-    }
-
-    if ( lseek( pfd, -1, SEEK_CUR ) < 0 ) {
-        perror( "type seek" );
-        exit( 1 );
-    }
-
-    return (int)type;
-}
-
-static int intelDetectSMP(void)
-{
-    vm_offset_t paddr;
-    int         where;
-    mpfps_t     mpfps;
-    int		rc = 0;
-    int		ncpus = 0;
-    
-    /* open physical memory for access to MP structures */
-    if ( (pfd = open( "/dev/mem", O_RDONLY )) < 0 ) {
-	return 0;
-    }
-
-    /* probe for MP structures */
-    apic_probe( &paddr, &where );
-    if ( where <= 0 )
-	return 0;
-
-    seekEntry( paddr );
-    readEntry( &mpfps, sizeof( mpfps_t ) );
-
-    if (mpfps.mpfb1)
-	/* old style */
-	rc = 1;
-    else {
-	/* go to the config table */
-	mpcth_t     cth;
-	int count, i;
-	    
-	paddr = (vm_offset_t) mpfps.pap;
-	seekEntry( paddr );
-	readEntry( &cth, sizeof( cth ) );
-	/* if we don't have any entries, the kernel sure
-	   won't be able to set up mp.  Needs at least one entry
-	   for smp kernel */
-	if (cth.entry_count <= 1) {
-	    close (pfd);
-	    return 0;
-	}
-	count = cth.entry_count;
-	for (i = 0; i < count; i++) {
-	    if ( readType() == 0 ) {
-		ProcEntry   entry;
-		readEntry( &entry, sizeof( entry ) );
-		if (entry.cpuFlags & PROCENTRY_FLAG_EN)
-		    ncpus++;
-	    }
-	}
-	if (ncpus > 1)
-	    rc = 1;
-    }
-
-    close (pfd);
-    return rc;
-}
-
-/*
- * set PHYSICAL address of MP floating pointer structure
- */
-#define NEXT(X)         ((X) += 4)
-static void
-apic_probe( vm_offset_t* paddr, int* where )
-{
-    /*
-     * c rewrite of apic_probe() by Jack F. Vogel
-     */
-
-    int         x;
-    u_short     segment;
-    vm_offset_t target;
-    u_int       buffer[ BIOS_SIZE / sizeof( int ) ];
-
-    if ( verbose )
-        printf( "\n" );
-
-    /* search Extended Bios Data Area, if present */
-    if ( verbose )
-        printf( " looking for EBDA pointer @ 0x%04x, ", EBDA_POINTER );
-    seekEntry( (vm_offset_t)EBDA_POINTER );
-    readEntry( &segment, 2 );
-    if ( segment ) {                /* search EBDA */
-        target = (vm_offset_t)segment << 4;
-        if ( verbose )
-            printf( "found, searching EBDA @ 0x%08x\n", target );
-        seekEntry( target );
-        readEntry( buffer, ONE_KBYTE );
-
-        for ( x = 0; x < ONE_KBYTE / sizeof ( unsigned int ); NEXT(x) ) {
-            if ( buffer[ x ] == MP_SIG ) {
-                *where = 1;
-                *paddr = (x * sizeof( unsigned int )) + target;
-                return;
-            }
-        }
-    }
-    else {
-        if ( verbose )
-            printf( "NOT found\n" );
-    }
-
-    /* read CMOS for real top of mem */
-    seekEntry( (vm_offset_t)TOPOFMEM_POINTER );
-    readEntry( &segment, 2 );
-    --segment;                                          /* less ONE_KBYTE */
-    target = segment * 1024;
-    if ( verbose )
-        printf( " searching CMOS 'top of mem' @ 0x%08x (%dK)\n",
-                target, segment );
-    seekEntry( target );
-    readEntry( buffer, ONE_KBYTE );
-
-    for ( x = 0; x < ONE_KBYTE / sizeof ( unsigned int ); NEXT(x) ) {
-        if ( buffer[ x ] == MP_SIG ) {
-            *where = 2;
-            *paddr = (x * sizeof( unsigned int )) + target;
-            return;
-        }
-    }
-
-    /* we don't necessarily believe CMOS, check base of the last 1K of 640K */
-    if ( target != (DEFAULT_TOPOFMEM - 1024)) {
-        target = (DEFAULT_TOPOFMEM - 1024);
-        if ( verbose )
-            printf( " searching default 'top of mem' @ 0x%08x (%dK)\n",
-                    target, (target / 1024) );
-        seekEntry( target );
-        readEntry( buffer, ONE_KBYTE );
-
-        for ( x = 0; x < ONE_KBYTE / sizeof ( unsigned int ); NEXT(x) ) {
-            if ( buffer[ x ] == MP_SIG ) {
-                *where = 3;
-                *paddr = (x * sizeof( unsigned int )) + target;
-                return;
-            }
-        }
-    }
-
-    /* search the BIOS */
-    if ( verbose )
-        printf( " searching BIOS @ 0x%08x\n", BIOS_BASE );
-    seekEntry( BIOS_BASE );
-    readEntry( buffer, BIOS_SIZE );
-
-    for ( x = 0; x < BIOS_SIZE / sizeof( unsigned int ); NEXT(x) ) {
-        if ( buffer[ x ] == MP_SIG ) {
-            *where = 4;
-            *paddr = (x * sizeof( unsigned int )) + BIOS_BASE;
-            return;
-        }
-    }
-
-    /* search the extended BIOS */
-    if ( verbose )
-        printf( " searching extended BIOS @ 0x%08x\n", BIOS_BASE2 );
-    seekEntry( BIOS_BASE2 );
-    readEntry( buffer, BIOS_SIZE );
-
-    for ( x = 0; x < BIOS_SIZE / sizeof( unsigned int ); NEXT(x) ) {
-        if ( buffer[ x ] == MP_SIG ) {
-            *where = 5;
-            *paddr = (x * sizeof( unsigned int )) + BIOS_BASE2;
-            return;
-        }
-    }
-
-    if ( grope ) {
-        /* search additional memory */
-        target = GROPE_AREA1;
-        if ( verbose )
-            printf( " groping memory @ 0x%08x\n", target );
-        seekEntry( target );
-        readEntry( buffer, GROPE_SIZE );
-
-        for ( x = 0; x < GROPE_SIZE / sizeof( unsigned int ); NEXT(x) ) {
-            if ( buffer[ x ] == MP_SIG ) {
-                *where = 6;
-                *paddr = (x * sizeof( unsigned int )) + GROPE_AREA1;
-                return;
-            }
-        }
-
-        target = GROPE_AREA2;
-        if ( verbose )
-            printf( " groping memory @ 0x%08x\n", target );
-        seekEntry( target );
-        readEntry( buffer, GROPE_SIZE );
-
-        for ( x = 0; x < GROPE_SIZE / sizeof( unsigned int ); NEXT(x) ) {
-            if ( buffer[ x ] == MP_SIG ) {
-                *where = 7;
-                *paddr = (x * sizeof( unsigned int )) + GROPE_AREA2;
-                return;
-            }
-        }
-    }
-
-    *where = 0;
-    *paddr = (vm_offset_t)0;
-}
-
-
-/*
- *
- */
-static void
-seekEntry( vm_offset_t addr )
-{
-    if ( lseek( pfd, (off_t)addr, SEEK_SET ) < 0 ) {
-        return;
-        perror( "/dev/mem seek" );
-        exit( 1 );
-    }
-}
-
-
-/*
- *
- */
-static void
-readEntry( void* entry, int size )
-{
-    if ( read( pfd, entry, size ) != size ) {
-        return;
-        perror( "readEntry" );
-        exit( 1 );
-    }
-}
-
-
-#endif /* __i386__ */
-
-int detectSMP(void)
-{
-    static int isSMP = -1;
-
-    if (isSMP != -1)
-	return isSMP;
-
-#ifdef __i386__
-    return isSMP = intelDetectSMP();
-#elif __sparc__
-    return isSMP = sparcDetectSMP();
-#elif __alpha__
-    return isSMP = alphaDetectSMP();
-#elif __powerpc__
-    return isSMP = ppcDetectSMP();
-#elif __ia64__
-    return isSMP = 1;
-#else
-    #error unknown architecture
-#endif
-}
-
-#if 0
-main() {
-  if (detectSMP())
-    printf("has smp\n");
-  else
-    printf("no smp\n");
-}
-
-#endif
diff --git a/perl-install/c/smp.h b/perl-install/c/smp.h
deleted file mode 100644
index 3255cc489..000000000
--- a/perl-install/c/smp.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef SMP_H
-#define SMP_H
-
-int detectSMP(void);
-
-#endif /* SMP_H */
diff --git a/perl-install/c/stuff.pm b/perl-install/c/stuff.pm
deleted file mode 100644
index 918abee6c..000000000
--- a/perl-install/c/stuff.pm
+++ /dev/null
@@ -1,34 +0,0 @@
-package c::stuff; # $Id$
-
-use strict;
-use vars qw($VERSION @ISA);
-
-require DynaLoader;
-
-@ISA = qw(DynaLoader);
-$VERSION = '0.01';
-
-bootstrap c::stuff $VERSION;
-
-sub from_utf8 { iconv($_[0], "utf-8", standard_charset()) }
-sub to_utf8 { iconv($_[0], standard_charset(), "utf-8") }
-
-sub headerGetEntry {
-    my ($h, $q) = @_;
-    $h or log::l("empty header in headerGetEntry"), return;
-    $q eq 'name' and return headerGetEntry_string($h, RPMTAG_NAME());
-    $q eq 'group' and return from_utf8(headerGetEntry_string($h, RPMTAG_GROUP()));
-    $q eq 'version' and return headerGetEntry_string($h, RPMTAG_VERSION());
-    $q eq 'release' and return headerGetEntry_string($h, RPMTAG_RELEASE());
-    $q eq 'epoch' and return headerGetEntry_int($h, RPMTAG_EPOCH());
-    $q eq 'summary' and return from_utf8(headerGetEntry_string($h, RPMTAG_SUMMARY()));
-    $q eq 'description' and return from_utf8(headerGetEntry_string($h, RPMTAG_DESCRIPTION()));
-    $q eq 'arch' and return headerGetEntry_string($h, RPMTAG_ARCH());
-    $q eq 'size' and return headerGetEntry_int($h, RPMTAG_SIZE());
-    $q eq 'obsoletes' and return headerGetEntry_string_list($h, RPMTAG_OBSOLETES());
-    $q eq 'requires' and return headerGetEntry_string_list($h, RPMTAG_REQUIRENAME());
-    $q eq 'fileflags' and return headerGetEntry_int_list($h, RPMTAG_FILEFLAGS());
-    $q eq 'filenames' and return headerGetEntry_filenames($h);
-}
-
-1;
diff --git a/perl-install/c/stuff.xs.pm b/perl-install/c/stuff.xs.pm
deleted file mode 100644
index d0789c951..000000000
--- a/perl-install/c/stuff.xs.pm
+++ /dev/null
@@ -1,1078 +0,0 @@
-use Config;
-
-print '
-#include "EXTERN.h"
-#include "perl.h"
-#include "XSUB.h"
-
-/* workaround for glibc and kernel header files not in sync */
-#define dev_t dev_t
-
-#include <ctype.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <syslog.h>
-#include <fcntl.h>
-#include <resolv.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <sys/ioctl.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-#include <sys/stat.h>
-#include <sys/utsname.h>
-#include <sys/mount.h>
-#include <linux/keyboard.h>
-#include <linux/kd.h>
-#include <linux/hdreg.h>
-#include <linux/vt.h>
-#include <linux/fd.h>
-#include <linux/cdrom.h>
-#include <linux/loop.h>
-#include <linux/blkpg.h>
-#include <net/if.h>
-#include <net/route.h>
-
-/* for is_ext3 */
-#include <ext2fs/ext2_fs.h>
-#include <ext2fs/ext2fs.h>
-
-#include <libldetect.h>
-#include <X11/Xlib.h>
-#include <X11/extensions/xf86misc.h>
-
-#include <libintl.h>
-#include <term.h>
-#undef max_colors
-
-#define SECTORSIZE 512
-
-char *prom_getopt();
-void prom_setopt();
-char *prom_getproperty();
-char *disk2PromPath();
-char *promRootName();
-
-';
-
-$ENV{C_DRAKX} && $Config{archname} =~ /i.86/ and print '
-char *pcmcia_probe(void);
-';
-
-$ENV{C_RPM} and print '
-#include <langinfo.h>
-#include <string.h>
-#include <iconv.h>
-
-#undef Fflush
-#undef Mkdir
-#undef Stat
-#include <rpm/rpmlib.h>
-#include <rpm/rpmio.h>
-
-void rpmError_callback_empty(void) {}
-
-int rpmError_callback_data;
-void rpmError_callback(void) {
-  if (rpmErrorCode() != RPMERR_UNLINK && rpmErrorCode() != RPMERR_RMDIR) {
-    write(rpmError_callback_data, rpmErrorString(), strlen(rpmErrorString()));
-  }
-}
-
-';
-
-$ENV{C_DRAKX} and print '
-
-#include <gdk/gdkx.h>
-
-void initIMPS2() {
-  unsigned char imps2_s1[] = { 243, 200, 243, 100, 243, 80, };
-  unsigned char imps2_s2[] = { 246, 230, 244, 243, 100, 232, 3, };
-
-  int fd = open("/dev/cdrom", O_WRONLY);
-  if (fd < 0) return;
-
-  write (fd, imps2_s1, sizeof (imps2_s1));
-  usleep (30000);
-  write (fd, imps2_s2, sizeof (imps2_s2));
-  usleep (30000);
-  tcflush (fd, TCIFLUSH);
-  tcdrain(fd);
-}
-
-void log_message(const char * s, ...) {}
-
-';
-
-print '
-
-MODULE = c::stuff		PACKAGE = c::stuff
-
-';
-
-$ENV{C_DRAKX} && $Config{archname} =~ /i.86/ and print '
-char *
-pcmcia_probe()
-';
-
-$ENV{C_DRAKX} and print '
-
-int
-Xtest(display)
-  char *display
-  CODE:
-  int pid;
-  if ((pid = fork()) == 0) {
-    Display *d = XOpenDisplay(display);
-    if (d) {
-      XSetCloseDownMode(d, RetainPermanent);
-      XCloseDisplay(d);
-    }
-    _exit(d != NULL);
-  }
-  waitpid(pid, &RETVAL, 0);
-  OUTPUT:
-  RETVAL
-
-void
-setMouseLive(display, type, emulate3buttons)
-  char *display
-  int type
-  int emulate3buttons
-  CODE:
-  {
-    XF86MiscMouseSettings mseinfo;
-    Display *d = XOpenDisplay(display);
-    if (d) {
-      if (XF86MiscGetMouseSettings(d, &mseinfo) == True) {
-        mseinfo.type = type;
-        mseinfo.flags |= MF_REOPEN;
-        mseinfo.emulate3buttons = emulate3buttons;
-        XF86MiscSetMouseSettings(d, &mseinfo);
-        XFlush(d);
-        if (type == MTYPE_IMPS2) initIMPS2();
-      }
-    }
-  }
-';
-
-print '
-
-int
-add_partition(hd, start_sector, size_sector, part_number)
-  int hd
-  unsigned long start_sector
-  unsigned long size_sector
-  int part_number
-  CODE:
-  {
-    long long start = start_sector * 512;
-    long long size = size_sector * 512;
-    struct blkpg_partition p = { start, size, part_number, "", "" };
-    struct blkpg_ioctl_arg s = { BLKPG_ADD_PARTITION, 0, sizeof(struct blkpg_partition), (void *) &p };
-    RETVAL = ioctl(hd, BLKPG, &s) == 0;
-  }
-  OUTPUT:
-  RETVAL
-
-int
-is_secure_file(filename)
-  char * filename
-  CODE:
-  {
-    int fd;
-    unlink(filename); /* in case it exists and we manage to remove it */
-    RETVAL = (fd = open(filename, O_RDWR | O_CREAT | O_EXCL, 0600)) != -1;
-    if (RETVAL) close(fd);
-  }
-  OUTPUT:
-  RETVAL
-
-int
-is_ext3(device_name)
-  char * device_name
-  CODE:
-  {
-    ext2_filsys fs;
-    int retval = ext2fs_open (device_name, 0, 0, 0, unix_io_manager, &fs);
-    if (retval) {
-      RETVAL = 0;
-    } else {
-      RETVAL = fs->super->s_feature_compat & EXT3_FEATURE_COMPAT_HAS_JOURNAL;
-      ext2fs_close(fs);  
-    }
-  }
-  OUTPUT:
-  RETVAL
-
-void
-setlocale()
-   CODE:
-   setlocale(LC_ALL, "");
-   setlocale(LC_NUMERIC, "C"); /* otherwise eval "1.5" returns 1 in fr_FR for example */
-
-char *
-bindtextdomain(domainname, dirname)
-   char * domainname
-   char * dirname
-
-char *
-dgettext(domainname, msgid)
-   char * domainname
-   char * msgid
-
-int
-KTYP(x)
-  int x
-  CODE:
-  RETVAL = KTYP(x);
-  OUTPUT:
-  RETVAL
-
-int
-lseek_sector(fd, sector, offset)
-  int fd
-  long sector
-  long offset
-  CODE:
-  RETVAL = lseek64(fd, (off64_t) sector * SECTORSIZE + offset, SEEK_SET) >= 0;
-  OUTPUT:
-  RETVAL
-
-int
-isBurner(fd)
-  int fd
-  CODE:
-  RETVAL = ioctl(fd, CDROM_GET_CAPABILITY) & CDC_CD_RW;
-  OUTPUT:
-  RETVAL
-
-int
-isDvdDrive(fd)
-  int fd
-  CODE:
-  RETVAL = ioctl(fd, CDROM_GET_CAPABILITY) & CDC_DVD;
-  OUTPUT:
-  RETVAL
-
-char *
-floppy_info(name)
-  char * name
-  CODE:
-  int fd = open(name, O_RDONLY | O_NONBLOCK);
-  RETVAL = NULL;
-  if (fd != -1) {
-     char drivtyp[17];
-     ioctl(fd, FDGETDRVTYP, (void *)drivtyp);
-     RETVAL = drivtyp;
-  }
-  OUTPUT:
-  RETVAL
-
-unsigned int
-total_sectors(fd)
-  int fd
-  CODE:
-  {
-    long s;
-    RETVAL = ioctl(fd, BLKGETSIZE, &s) == 0 ? s : 0;
-  }
-  OUTPUT:
-  RETVAL
-
-void
-unlimit_core()
-  CODE:
-  {
-    struct rlimit rlim = { RLIM_INFINITY, RLIM_INFINITY };
-    setrlimit(RLIMIT_CORE, &rlim);
-  }
-
-int
-getlimit_core()
-  CODE:
-  {
-    struct rlimit rlim;
-    getrlimit(RLIMIT_CORE, &rlim);
-    RETVAL = rlim.rlim_cur;
-  }
-  OUTPUT:
-  RETVAL
-
-void
-openlog(ident)
-  char *ident
-  CODE:
-  openlog(ident, 0, 0);
-
-void
-closelog()
-
-void
-syslog(mesg)
-  char *mesg
-  CODE:
-  syslog(LOG_WARNING, mesg);
-
-void
-setsid()
-
-void
-_exit(status)
-  int status
-  
-int
-detectSMP()
-
-void
-pci_probe(probe_type)
-  int probe_type
-  PPCODE:
-    struct pciusb_entries entries = pci_probe(probe_type);
-    char buf[2048];
-    int i;
-
-    EXTEND(SP, entries.nb);
-    for (i = 0; i < entries.nb; i++) {
-      struct pciusb_entry e = entries.entries[i];
-      snprintf(buf, sizeof(buf), "%04x\t%04x\t%04x\t%04x\t%d\t%d\t%d\t%s\t%s\t%s", 
-               e.vendor, e.device, e.subvendor, e.subdevice, e.pci_bus, e.pci_device, e.pci_function,
-               pci_class2text(e.class), e.module ? e.module : "unknown", e.text);
-      PUSHs(sv_2mortal(newSVpv(buf, 0)));
-    }
-    pciusb_free(entries);
-
-void
-usb_probe()
-  PPCODE:
-    struct pciusb_entries entries = usb_probe();
-    char buf[2048];
-    int i;
-
-    EXTEND(SP, entries.nb);
-    for (i = 0; i < entries.nb; i++) {
-      struct pciusb_entry e = entries.entries[i];
-      snprintf(buf, sizeof(buf), "%04x\t%04x\t%s\t%s\t%s", 
-               e.vendor, e.device, usb_class2text(e.class), e.module ? e.module : "unknown", e.text);
-      PUSHs(sv_2mortal(newSVpv(buf, 0)));
-    }
-    pciusb_free(entries);
-
-unsigned int
-getpagesize()
-
-int
-hasNetDevice(device)
-  char * device
-  CODE:
-    struct ifreq req;
-    int s = socket(AF_INET, SOCK_DGRAM, 0);
-    if (s == -1) { RETVAL = 0; return; }
-
-    strcpy(req.ifr_name, device);
-
-    RETVAL = ioctl(s, SIOCGIFFLAGS, &req) == 0;
-    close(s);
-  OUTPUT:
-  RETVAL
-
-int
-addDefaultRoute(gateway)
-  char *gateway
-  CODE:
-    struct rtentry route;
-    struct sockaddr_in addr;
-    int s = socket(AF_INET, SOCK_DGRAM, 0);
-    if (s == -1) { RETVAL = 0; return; }
-
-    memset(&route, 0, sizeof(route));
-
-    addr.sin_family = AF_INET;
-    addr.sin_port = 0;
-    inet_aton(gateway, &addr.sin_addr);
-    memcpy(&route.rt_gateway, &addr, sizeof(addr));
-
-    addr.sin_addr.s_addr = INADDR_ANY;
-    memcpy(&route.rt_dst, &addr, sizeof(addr));
-    memcpy(&route.rt_genmask, &addr, sizeof(addr));
-
-    route.rt_flags = RTF_UP | RTF_GATEWAY;
-    route.rt_metric = 0;
-
-    RETVAL = !ioctl(s, SIOCADDRT, &route);
-  OUTPUT:
-  RETVAL
-
-char *
-kernel_version()
-  CODE:
-  struct utsname u;
-  if (uname(&u) == 0) RETVAL = u.release; else RETVAL = NULL;
-  OUTPUT:
-  RETVAL
-
-int
-set_loop(dev_fd, file)
-  int dev_fd
-  char *file
-  CODE:
-  RETVAL = 0;
-{
-  struct loop_info loopinfo;
-  int file_fd = open(file, O_RDWR);
-
-  if (file_fd < 0) return;
-
-  memset(&loopinfo, 0, sizeof(loopinfo));
-  strncpy(loopinfo.lo_name, file, LO_NAME_SIZE);
-  loopinfo.lo_name[LO_NAME_SIZE - 1] = 0;
-
-  if (ioctl(dev_fd, LOOP_SET_FD, file_fd) < 0) return;
-  if (ioctl(dev_fd, LOOP_SET_STATUS, &loopinfo) < 0) {
-    ioctl(dev_fd, LOOP_CLR_FD, 0);
-    return;
-  }
-  close(file_fd);
-  RETVAL = 1;
-}
-  OUTPUT:
-  RETVAL
-
-int
-del_loop(device)
-  char *device
-  CODE:
-  RETVAL = 0;
-{
-  int fd;
-  if ((fd = open(device, O_RDONLY)) < 0) return;
-  if (ioctl(fd, LOOP_CLR_FD, 0) < 0) return;
-  close(fd);
-  RETVAL = 1;
-}
-  OUTPUT:
-  RETVAL
-
-int
-prom_open()
-
-void
-prom_close()
-
-int
-prom_getsibling(node)
-  int node
-
-int
-prom_getchild(node)
-  int node
-
-void
-prom_getopt(key)
-  char *key
-  PPCODE:
-  int lenp = 0;
-  char *value = NULL;
-  value = prom_getopt(key, &lenp);
-  EXTEND(sp, 1);
-  if (value != NULL) {
-    PUSHs(sv_2mortal(newSVpv(value, 0)));
-  } else {
-    PUSHs(&PL_sv_undef);
-  }
-
-void
-prom_setopt(key, value)
-  char *key
-  char *value
-
-void
-prom_getproperty(key)
-  char *key
-  PPCODE:
-  int lenp = 0;
-  char *value = NULL;
-  value = prom_getproperty(key, &lenp);
-  EXTEND(sp, 1);
-  if (value != NULL) {
-    PUSHs(sv_2mortal(newSVpv(value, lenp)));
-  } else {
-    PUSHs(&PL_sv_undef);
-  }
-
-void
-prom_getstring(key)
-  char *key
-  PPCODE:
-  int lenp = 0;
-  char *value = NULL;
-  value = prom_getproperty(key, &lenp);
-  EXTEND(sp, 1);
-  if (value != NULL) {
-    PUSHs(sv_2mortal(newSVpv(value, 0)));
-  } else {
-    PUSHs(&PL_sv_undef);
-  }
-
-int
-prom_getbool(key)
-  char *key
-
-
-
-void
-initSilo()
-
-char *
-disk2PromPath(disk)
-  unsigned char *disk
-
-int
-hasAliases()
-
-char *
-promRootName()
-
-void
-setPromVars(linuxAlias, bootDevice)
-  char *linuxAlias
-  char *bootDevice
-';
-
-$ENV{C_RPM} and print '
-char *
-iconv(s, from_charset, to_charset)
-  char *s
-  char *from_charset
-  char *to_charset
-  CODE:
-  iconv_t cd = iconv_open(to_charset, from_charset);
-  RETVAL = s;
-  if (cd != (iconv_t) (-1)) {
-      size_t s_len = strlen(RETVAL);
-      char *buf = alloca(3 * s_len + 10); /* 10 for safety, it should not be needed */
-      {
-	  char *ptr = buf;
-	  size_t ptr_len = 3 * s_len + 10;
-	  if ((iconv(cd, &s, &s_len, &ptr, &ptr_len)) != (size_t) (-1)) {
-	      *ptr = 0;
-	      RETVAL = buf;
-	  }
-      }
-      iconv_close(cd);
-  }
-  OUTPUT:
-  RETVAL
-
-char *
-standard_charset()
-  CODE:
-  RETVAL = nl_langinfo(CODESET);
-  OUTPUT:
-  RETVAL
-
-int
-rpmReadConfigFiles()
-  CODE:
-  char *rpmrc = getenv("RPMRC_FILE");
-  if (rpmrc != NULL && !*rpmrc) rpmrc = NULL;
-  RETVAL = rpmReadConfigFiles(rpmrc, NULL) == 0;
-  OUTPUT:
-  RETVAL
-
-int
-rpmdbInit(root, perms)
-  char *root
-  int perms
-  CODE:
-  RETVAL = rpmdbInit(root, perms) == 0;
-  OUTPUT:
-  RETVAL
-
-void *
-rpmdbOpen(root)
-  char *root
-  CODE:
-  static rpmdb db;
-  RETVAL = rpmdbOpen(root, &db, O_RDWR | O_CREAT, 0644) == 0 ||
-           rpmdbOpen(root, &db, O_RDONLY, 0644) == 0 ? db : NULL;
-  OUTPUT:
-  RETVAL
-
-void *
-rpmdbOpenForTraversal(root)
-  char *root
-  CODE:
-  static rpmdb db;
-  rpmErrorCallBackType old_cb;
-  old_cb = rpmErrorSetCallback(rpmError_callback_empty);
-  rpmSetVerbosity(RPMMESS_FATALERROR);
-  RETVAL = rpmdbOpen(root, &db, O_RDONLY, 0644) == 0 ? db : NULL;
-  rpmErrorSetCallback(old_cb);
-  rpmSetVerbosity(RPMMESS_NORMAL);
-  OUTPUT:
-  RETVAL
-
-void
-rpmdbClose(db)
-  void *db
-
-int
-rpmdbTraverse(db, ...)
-  void *db
-  PREINIT:
-  SV *callback = &PL_sv_undef;
-  int count;
-  Header h;
-  rpmdbMatchIterator mi;
-  CODE:
-  if (items > 1) {
-    callback = ST(1);
-  }
-  count = 0;
-  mi = rpmdbInitIterator(db, RPMDBI_PACKAGES, NULL, 0);
-  while (h = rpmdbNextIterator(mi)) {
-    if (callback != &PL_sv_undef && SvROK(callback)) {
-      dSP;
-      ENTER;
-      SAVETMPS;
-      PUSHMARK(sp);
-      XPUSHs(sv_2mortal(newSViv((IV)(void *)h)));
-      PUTBACK;
-      perl_call_sv(callback, G_DISCARD | G_SCALAR);
-      FREETMPS;
-      LEAVE;
-    }
-    ++count;
-  }
-  rpmdbFreeIterator(mi);
-  RETVAL = count;
-  OUTPUT:
-  RETVAL
-
-int
-rpmdbNameTraverse(db, name, ...)
-  void *db
-  char *name
-  PREINIT:
-  SV *callback = &PL_sv_undef;
-  int count;
-  Header h;
-  rpmdbMatchIterator mi;
-  rpmErrorCallBackType oldcb;
-  CODE:
-  if (items > 2) {
-    callback = ST(2);
-  }
-  count = 0;
-  mi = rpmdbInitIterator(db, RPMTAG_NAME, name, 0);
-  oldcb = rpmErrorSetCallback(rpmError_callback_empty);
-  while (h = rpmdbNextIterator(mi)) {
-    if (callback != &PL_sv_undef && SvROK(callback)) {
-      dSP;
-      ENTER;
-      SAVETMPS;
-      PUSHMARK(sp);
-      XPUSHs(sv_2mortal(newSViv((IV)(void *)h)));
-      PUTBACK;
-      perl_call_sv(callback, G_DISCARD | G_SCALAR);
-      FREETMPS;
-      LEAVE;
-    }
-    ++count;
-  }
-  rpmErrorSetCallback(oldcb);
-  rpmdbFreeIterator(mi);
-  RETVAL = count;
-  OUTPUT:
-  RETVAL
-
-
-void *
-rpmtransCreateSet(db, rootdir)
-  void *db
-  char *rootdir
-
-void
-rpmtransAvailablePackage(rpmdep, header, key)
-  void *rpmdep
-  void *header
-  char *key
-  CODE:
-  rpmtransAvailablePackage(rpmdep, header, strdup(key));
-
-int
-rpmtransAddPackage(rpmdep, header, key, update)
-  void *rpmdep
-  void *header
-  char *key
-  int update
-  CODE:
-  rpmTransactionSet r = rpmdep;
-  RETVAL = rpmtransAddPackage(r, header, NULL, strdup(key), update, NULL) == 0;
-  /* rpminstall.c of rpm-4 call headerFree directly after, we can make the same ?*/
-  OUTPUT:
-  RETVAL
-
-int
-rpmtransRemovePackages(db, rpmdep, p)
-  void *db
-  void *rpmdep
-  char *p
-  CODE:
-  rpmdb d = db;
-  rpmTransactionSet r = rpmdep;
-  Header h;
-  rpmdbMatchIterator mi;
-  int count = 0;
-  mi = rpmdbInitIterator(db, RPMDBI_LABEL, p, 0);
-  while (h = rpmdbNextIterator(mi)) {
-    unsigned int recOffset = rpmdbGetIteratorOffset(mi);
-    if (recOffset) {
-      rpmtransRemovePackage(rpmdep, recOffset);
-      ++count;
-    }
-  }
-  rpmdbFreeIterator(mi);
-  RETVAL=count;
-  OUTPUT:
-  RETVAL
-
-int
-rpmdepOrder(order)
-  void *order
-  CODE:
-  RETVAL = rpmdepOrder(order) == 0;
-  OUTPUT:
-  RETVAL
-
-int
-rpmdbRebuild(root)
-  char *root
-  CODE:
-  rpmErrorCallBackType old_cb;
-  old_cb = rpmErrorSetCallback(rpmError_callback_empty);
-  rpmSetVerbosity(RPMMESS_FATALERROR);
-  RETVAL = rpmdbRebuild(root) == 0;
-  rpmErrorSetCallback(old_cb);
-  rpmSetVerbosity(RPMMESS_NORMAL);
-  OUTPUT:
-  RETVAL
-
-void
-rpmtransFree(trans)
-  void *trans
-
-char *
-rpmErrorString()
-
-int
-rpmVersionCompare(headerFirst, headerSecond)
-  void *headerFirst
-  void *headerSecond
-
-void
-rpmSetVeryVerbose()
-  CODE:
-  rpmSetVerbosity(RPMMESS_DEBUG);
-
-void
-rpmtransSetScriptFd(trans, fd)
-  void *trans
-  int fd
-  CODE:
-  static FD_t scriptFd = NULL;
-  if (scriptFd != NULL) fdClose(scriptFd);
-  scriptFd = fdDup(fd);
-  rpmtransSetScriptFd(trans, scriptFd);
-
-void
-rpmRunTransactions(trans, callbackOpen, callbackClose, callbackMessage, force)
-  void *trans
-  SV *callbackOpen
-  SV *callbackClose
-  SV *callbackMessage
-  int force
-  PPCODE:
-  rpmProblemSet probs;
-  void *rpmRunTransactions_callback(const void *h, const rpmCallbackType what, const unsigned long amount, const unsigned long total, const void * pkgKey, void * data) {
-      static int last_amount;
-      static FD_t fd = NULL;
-      char *msg = NULL;
-      char *param_s = NULL;
-      const unsigned long *param_ul1 = NULL;
-      const unsigned long *param_ul2 = NULL;
-      char *n = (char *) pkgKey;
-      static struct timeval tprev;
-      static struct timeval tcurr;
-      long delta;
-
-      switch (what) {
-      case RPMCALLBACK_INST_OPEN_FILE: {
-        int i;
-  	dSP;
-  	PUSHMARK(sp);
-  	XPUSHs(sv_2mortal(newSVpv(n, 0)));
-  	PUTBACK;
-  	i = perl_call_sv(callbackOpen, G_SCALAR);
-        SPAGAIN;
-        if (i != 1) croak("Big trouble\n");
-        i = POPi; fd = fdDup(i);
-	fd = fdLink(fd, "persist DrakX");
-  	PUTBACK;
-        return fd;
-      }
-
-      case RPMCALLBACK_INST_CLOSE_FILE: {
-	dSP;
-  	PUSHMARK(sp);
-  	XPUSHs(sv_2mortal(newSVpv(n, 0)));
-  	PUTBACK;
-  	perl_call_sv(callbackClose, G_DISCARD);
-        free(n); /* was strdup in rpmtransAddPackage */
-	fd = fdFree(fd, "persist DrakX");
-	if (fd) {
-	  fdClose(fd);
-	  fd = NULL;
-	}
-  	break;
-      }
-
-      case RPMCALLBACK_TRANS_START: {
-        switch (amount) {
-        case 1: msg = "Examining packages to install..."; break;
-        case 5: msg = "Examining files to install..."; break;
-        case 6: msg = "Finding overlapping files..."; break;
-        }
-        if (msg) param_ul1 = &total;
-      } break;
-
-      case RPMCALLBACK_UNINST_START: {
-        msg = "Removing old files...";
-        param_ul1 = &total;
-      } break;
-
-      case RPMCALLBACK_TRANS_PROGRESS: {
-        msg = "Progressing transaction";
-        param_ul1 = &amount;
-      } break;
-
-      case RPMCALLBACK_UNINST_PROGRESS: {
-        msg = "Progressing removing old files";
-        param_ul1 = &amount;
-      } break;
-
-      case RPMCALLBACK_TRANS_STOP: {
-        msg = "Done transaction";
-      } break;
-
-      case RPMCALLBACK_UNINST_STOP: {
-        msg = "Done removing old files";
-      } break;
-
-      case RPMCALLBACK_INST_START: {
-        msg = "Starting installing package";
-	gettimeofday(&tprev, NULL);
-        param_s = n;
-
-        last_amount = 0;
-      } break;
-
-      case RPMCALLBACK_INST_PROGRESS:
-        gettimeofday(&tcurr, NULL);
-        delta = 1000000 * (tcurr.tv_sec - tprev.tv_sec) + (tcurr.tv_usec - tprev.tv_usec);
-        if (delta > 200000 || amount >= total - 1) { /* (total && (amount - last_amount) * 22 / 4 / total)) { */
-          msg = "Progressing installing package";
-          param_s = n;
-          param_ul1 = &amount;
-          param_ul2 = &total;
-
-	  tprev = tcurr;
-          last_amount = amount;
-  	} break;
-      default: break;
-      }
-
-      if (msg) {
-        dSP ;
-        PUSHMARK(sp) ;
-  	XPUSHs(sv_2mortal(newSVpv(msg, 0)));
-        if (param_s) {
-  	  XPUSHs(sv_2mortal(newSVpv(param_s, 0)));
-        }
-        if (param_ul1) {
-  	  XPUSHs(sv_2mortal(newSViv(*param_ul1)));
-        }
-        if (param_ul2) {
-          XPUSHs(sv_2mortal(newSViv(*param_ul2)));
-        }
-  	PUTBACK ;
-  	perl_call_sv(callbackMessage, G_DISCARD);
-      }
-      return NULL;
-  }
-  if (rpmRunTransactions(trans, rpmRunTransactions_callback, NULL, NULL, &probs, 0, force ? ~0 : ~RPMPROB_FILTER_DISKSPACE)) {
-    int i;
-    /* printf("rpmRunTransactions finished, errors occured %d\n", probs->numProblems); fflush(stdout); */
-    EXTEND(SP, probs->numProblems);
-    for (i = 0; i < probs->numProblems; i++) {
-      PUSHs(sv_2mortal(newSVpv(rpmProblemString(&probs->probs[i]), 0)));
-    }
-  }
-
-void
-rpmErrorSetCallback(fd)
-  int fd
-  CODE:
-  rpmError_callback_data = fd;
-  rpmErrorSetCallback(rpmError_callback);
-
-void *
-rpmReadPackageHeader(fdno)
-  int fdno
-  CODE:
-  Header h;
-  int isSource, major;
-  FD_t fd = fdDup(fdno);
-  RETVAL = rpmReadPackageHeader(fd, &h, &isSource, &major, NULL) ? NULL : h;
-  fdClose(fd);
-  OUTPUT:
-  RETVAL
-
-void *
-headerRead(fdno, magicp)
-  int fdno
-  int magicp
-  CODE:
-  FD_t fd = fdDup(fdno);
-  RETVAL = (void *) headerRead(fd, magicp);
-  fdClose(fd);
-  OUTPUT:
-  RETVAL
-
-void
-headerFree(header)
-  void *header
-
-char *
-headerGetEntry_string(h, query)
-  void *h
-  int query
-  CODE:
-  int type, count;
-  headerGetEntry((Header) h, query, &type, (void **) &RETVAL, &count);
-  OUTPUT:
-  RETVAL
-
-int
-headerGetEntry_int(h, query)
-  void *h
-  int query
-  CODE:
-  int type, count, *i;
-  headerGetEntry((Header) h, query, &type, (void **) &i, &count);
-  RETVAL = i ? *i : 0; /* assume non existant value as 0 (needed for EPOCH (SERIAL)) */
-  OUTPUT:
-  RETVAL
-
-void
-headerGetEntry_int_list(h, query)
-  void *h
-  int query
-  PPCODE:
-  int i, type, count = 0;
-  int_32 *intlist = (int_32 *) NULL;
-  if (headerGetEntry((Header) h, query, &type, (void**) &intlist, &count)) {
-    if (count > 0) {
-      EXTEND(SP, count);
-      for (i = 0; i < count; i++) {
-        PUSHs(sv_2mortal(newSViv(intlist[i])));
-      }
-    }
-  }
-
-void
-headerGetEntry_string_list(h, query)
-  void *h
-  int query
-  PPCODE:
-  int i, type, count = 0;
-  char **strlist = (char **) NULL;
-  if (headerGetEntry((Header) h, query, &type, (void**) &strlist, &count)) {
-    if (count > 0) {
-      EXTEND(SP, count);
-      for (i = 0; i < count; i++) {
-        PUSHs(sv_2mortal(newSVpv(strlist[i], 0)));
-      }
-    }
-    free(strlist);
-  }
-
-void
-headerGetEntry_filenames(h)
-  void *h
-  PPCODE:
-  int i, type, count = 0;
-  char ** baseNames, ** dirNames;
-  int_32 * dirIndexes;
-  char **strlist = (char **) NULL;
-
-  if (headerGetEntry((Header) h, RPMTAG_OLDFILENAMES, &type, (void**) &strlist, &count)) {
-    if (count > 0) {
-      EXTEND(SP, count);
-      for (i = 0; i < count; i++) {
-        PUSHs(sv_2mortal(newSVpv(strlist[i], 0)));
-      }
-    }
-    free(strlist);
-  } else {
-
-    headerGetEntry(h, RPMTAG_BASENAMES, &type, (void **) &baseNames, &count);
-    headerGetEntry(h, RPMTAG_DIRINDEXES, &type, (void **) &dirIndexes, NULL);
-    headerGetEntry(h, RPMTAG_DIRNAMES, &type, (void **) &dirNames, NULL);
-
-    if (baseNames && dirNames && dirIndexes) {
-      EXTEND(SP, count);
-      for(i = 0; i < count; i++) {
-        char *p = malloc(strlen(dirNames[dirIndexes[i]]) + strlen(baseNames[i]) + 1);
-        if (p == NULL) croak("malloc failed");
-        strcpy(p, dirNames[dirIndexes[i]]);
-        strcat(p, baseNames[i]);
-  	PUSHs(sv_2mortal(newSVpv(p, 0)));
-        free(p);
-      }
-      free(baseNames);
-      free(dirNames);
-    }
-  }
-';
-
-@macros = (
-  [ qw(int S_IFCHR S_IFBLK S_IFIFO KDSKBENT KT_SPEC NR_KEYS MAX_NR_KEYMAPS BLKRRPART TIOCSCTTY
-       HDIO_GETGEO BLKGETSIZE LOOP_GET_STATUS
-       MS_MGC_VAL MS_RDONLY O_NONBLOCK F_SETFL F_GETFL O_CREAT SECTORSIZE WNOHANG
-       VT_ACTIVATE VT_WAITACTIVE VT_GETSTATE CDROM_LOCKDOOR CDROMEJECT
-       ) ],
-);
-push @macros, [ qw(int RPMTAG_NAME RPMTAG_GROUP RPMTAG_SIZE RPMTAG_VERSION RPMTAG_SUMMARY RPMTAG_DESCRIPTION RPMTAG_RELEASE RPMTAG_EPOCH RPMTAG_ARCH RPMTAG_OBSOLETES RPMTAG_REQUIRENAME RPMTAG_FILEFLAGS     RPMFILE_CONFIG) ]
-  if $ENV{C_RPM};
-
-$\= "\n";
-print;
-
-foreach (@macros) {
-    my ($type, @l) = @$_;
-    foreach (@l) {
-	print<< "END"
-$type
-$_()
-  CODE:
-  RETVAL = $_;
-
-  OUTPUT:
-  RETVAL
-
-END
-
-    }
-}
diff --git a/perl-install/class_discard.pm b/perl-install/class_discard.pm
deleted file mode 100644
index 7ecd1375b..000000000
--- a/perl-install/class_discard.pm
+++ /dev/null
@@ -1,11 +0,0 @@
-package class_discard; # $Id$
-
-use log;
-
-sub new { bless {}, "class_discard" }
-
-sub AUTOLOAD {
-    log::l("class_discard: $AUTOLOAD called at ", caller);
-}
-
-1;
diff --git a/perl-install/commands b/perl-install/commands
deleted file mode 100755
index baa02f232..000000000
--- a/perl-install/commands
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/usr/bin/perl
-
-use diagnostics;
-use strict;
-
-use lib qw(/usr/bin/perl-install .);
-use common;
-use commands;
-
-my $progname = basename($0);
-
-# hack as some functions are defined by perl... so chmod -> chmod_
-&{$commands::{$progname} || $commands::{$progname . "_"} || \&err}(@ARGV), exit 0;
-
-sub err { die "$0: unknown program (unimplemented)\n"; }
diff --git a/perl-install/commands.pm b/perl-install/commands.pm
deleted file mode 100644
index ecbe7774b..000000000
--- a/perl-install/commands.pm
+++ /dev/null
@@ -1,587 +0,0 @@
-#-########################################################################
-#- This file implement many common shell commands:
-#- true, false, cat, which, dirname, basename, rmdir, lsmod, grep, tr,
-#- mount, umount, mkdir, mknod, ln, rm, chmod, chown, mkswap, swapon,
-#- swapoff, ls, cp, ps, dd, head, tail, strings, hexdump, more, insmod,
-#- modprobe, route, df, kill, lspci, lssbus, dmesg, sort, du, 
-#-########################################################################
-package commands; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($printable_chars);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::System;
-use common;
-
-#-#####################################################################################
-#- Globals
-#-#####################################################################################
-my $BUFFER_SIZE = 1024;
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub getopts {
-    my $o = shift;
-    my @r = map { '' } (@_ = split //, $_[0]);
-    while (1) {
-	local $_ = $o->[0];
-	$_ && /^-/ or return @r;
-	for (my $i = 0; $i < @_; $i++) { /$_[$i]/ and $r[$i] = $_[$i]; }
-	shift @$o;
-    }
-    @r;
-}
-
-sub true { exit 0 }
-sub false { exit 1 }
-sub cat { @ARGV = @_; print while <> }
-sub which { ARG: foreach (@_) { foreach my $c (split /:/, $ENV{PATH}) { -x "$c/$_" and print("$c/$_\n"), next ARG; }}}
-sub dirname_ { print dirname(@_), "\n" }
-sub basename_ { print basename(@_), "\n" }
-sub rmdir_ { foreach (@_) { rmdir $_ or die "rmdir: can't remove $_\n" } }
-sub lsmod { print "Module                  Size  Used by\n"; cat("/proc/modules"); }
-
-sub grep_ {
-    my ($h, $v, $i) = getopts(\@_, qw(hvi));
-    @_ == 0 || $h and die "usage: grep <regexp> [files...]\n";
-    my $r = shift;
-    $r = qr/$r/i if $i;
-    @ARGV = @_; (/$r/ ? $v || print : $v && print) while <>;
-}
-
-sub tr_ {
-    my ($s, $c, $d) = getopts(\@_, qw(s c d));
-    @_ >= 1 + (!$d || $s) or die "usage: tr [-c] [-s [-d]] <set1> <set2> [files...]\n    or tr [-c] -d <set1> [files...]\n";
-    my $set1 = shift;
-    my $set2; !$d || $s and $set2 = shift;
-    @ARGV = @_;
-    eval "(tr/$set1/$set2/$s$d$c, print) while <>";
-}
-
-sub mount {
-    @_ or return cat("/proc/mounts");
-    my ($t, $r) = getopts(\@_, qw(tr));
-    my $fs = $t && shift;
-
-    @_ == 2 or die "usage: mount [-r] [-t <fs>] <device> <dir>\n",
-    "       (use -r for readonly)\n",
-    "       (if /dev/ is left off the device name, a temporary node will be created)\n";
-
-    my ($dev, $where) = @_;
-    $fs ||= $where =~ /:/ ? "nfs" :
-            $dev =~ /fd/ ? "vfat" : "ext2";
-
-    require fs;
-    require modules;
-    modules::load_deps("/modules/modules.dep");
-    fs::mount($dev, $where, $fs, $r);
-}
-
-sub umount {
-    @_ == 1 or die "umount expects a single argument\n";
-
-    require fs;
-    fs::umount($_[0]);
-}
-
-sub mkdir_ {
-    my ($rec) = getopts(\@_, qw(p));
-    mkdir_p($_) foreach @_;
-}
-
-
-sub mknod {
-    if (@_ == 1) {
-	require devices;
-	eval { devices::make($_[0]) }; $@ and die "mknod: failed to create $_[0]\n";
-    } elsif (@_ == 4) {
-	require c;
-	my $mode = $ {{"b" => c::S_IFBLK(), "c" => c::S_IFCHR()}}{$_[1]} or die "unknown node type $_[1]\n";
-	syscall_('mknod', my $a = $_[0], $mode | 0600, makedev($_[2], $_[3])) or die "mknod failed: $!\n";
-    } else { die "usage: mknod <path> [b|c] <major> <minor> or mknod <path>\n"; }
-}
-
-sub ln {
-    my ($force, $soft) = getopts(\@_, qw(fs));
-    @_ >= 1 or die "usage: ln [-s] [-f] <source> [<dest>]\n";
-
-    my ($source, $dest) = @_;
-    $dest ||= basename($source);
-
-    $force and unlink $dest;
-
-    ($soft ? symlink($source, $dest) : link($source, $dest)) or die "ln failed: $!\n";
-}
-
-sub rm {
-    my ($rec, undef) = getopts(\@_, qw(rf));
-
-    my $rm; $rm = sub {
-	foreach (@_) {
-	    if (!-l $_ && -d $_) {
-		$rec or die "$_ is a directory\n";
-		&$rm(glob_($_));
-		rmdir $_ or die "can't remove directory $_: $!\n";
-	    } else { unlink $_ or die "rm of $_ failed: $!\n" }
-	}
-    };
-    &$rm(@_);
-}
-
-sub chmod_ {
-    @_ >= 2 or die "usage: chmod <mode> <files>\n";
-
-    my $mode = shift;
-    $mode =~ /^[0-7]+$/ or die "illegal mode $mode\n";
-
-    foreach (@_) { chmod oct($mode), $_ or die "chmod failed $_: $!\n" }
-}
-
-sub chown_ {
-    my ($rec, undef) = getopts(\@_, qw(r));
-    local $_ = shift or die "usage: chown [-r] name[.group] <files>\n";
-
-    my ($name, $group) = (split('\.'), $_);
-
-    my ($uid, $gid) = (getpwnam($name) || $name, getgrnam($group) || $group);
-
-    my $chown; $chown = sub {
-	foreach (@_) {
-	    chown $uid, $gid, $_ or die "chown of file $_ failed: $!\n";
-	    -d $_ && $rec and &$chown(glob_($_));
-	}
-    };
-    &$chown(@_);
-}
-
-sub mkswap {
-    @_ == 1 or die "mkswap <device>\n";
-    require swap;
-    swap::enable($_[0], 0);
-}
-
-sub swapon {
-    @_ == 1 or die "swapon <file>\n";
-    require swap;
-    swap::swapon($_[0]);
-}
-sub swapoff {
-    @_ == 1 or die "swapoff <file>\n";
-    require swap;
-    swap::swapoff($_[0]);
-}
-
-sub uncpio {
-    @_ and die "uncpio reads from stdin\n";
-
-#    cpioInstallArchive(gzdopen(0, "r"), NULL, 0, NULL, NULL, &fail);
-}
-
-
-sub rights {
-    my $r = '-' x 9;
-    my @rights = (qw(x w r x w r x w r), ['t', 0], ['s', 3], ['s', 6]);
-    for (my $i = 0; $i < @rights; $i++) {
-	if (vec(pack("S", $_[0]), $i, 1)) {
-	    my ($val, $place) = $i >= 9 ? @{$rights[$i]} : ($rights[$i], $i);
-	    my $old = \substr($r, 8 - $place, 1);
-	    $$old = ($$old eq '-' && $i >= 9) ? uc $val : $val;
-	}
-    }
-    my @types = split //, "_pc_d_b_-_l_s";
-    $types[$_[0] >> 12 & 0xf] . $r;
-}
-
-sub displaySize {
-    my $m = $_[0] >> 12;
-    $m == 4 || $m == 8 || $m == 10;
-}
-
-sub ls {
-    my ($l , $h) = getopts(\@_, qw(lh));
-    $h and die "usage: ls [-l] <files...>\n";
-
-    @_ or @_ = '.';
-    @_ == 1 && -d $_[0] and @_ = glob_($_[0]);
-    foreach (sort @_) {
-	if ($l) {
-	    my @s = lstat or warn("can't stat file $_\n"), next;
-	    formline(
-"@<<<<<<<<< @<<<<<<< @<<<<<<< @>>>>>>>> @>>>>>>>>>>>>>>> @*\n",
-		     rights($s[2]), getpwuid $s[4] || $s[4], getgrgid $s[5] || $s[5],
-		     displaySize($s[2]) ? $s[7] : join(", ", unmakedev($s[6])),
-		     scalar localtime $s[9], -l $_ ? "$_ -> " . readlink $_ : $_);
-	    print $^A; $^A = '';
-	} else { print "$_\n"; }
-    }
-}
-sub cp {
-    my ($force) = getopts(\@_, qw(f));
-    @_ >= 2 or die "usage: cp [-f] <sources> <dest>\n(this cp does -Rl by default)\n";
-
-    my $cp; $cp = sub {
-	my $dest = pop @_;
-
-	@_ or return;
-	@_ == 1 || -d $dest or die "cp: copying multiple files, but last argument ($dest) is not a directory\n";
-
-	foreach my $src (@_) {
-	    my $dest = $dest;
-	    -d $dest and $dest .= "/" . basename($src);
-
-	    if (-e $dest) {
-		$force ? unlink $dest : die "file $dest already exist\n";
-	    }
-
-	    if (-d $src) {
-		-d $dest or mkdir $dest, (stat($src))[2] or die "mkdir: can't create directory $dest: $!\n";
-		&$cp(glob_($src), $dest);
-	    } elsif (-l $src) {
-		unless (symlink((readlink($src) || die "readlink failed: $!"), $dest)) {
-		    my $msg = "symlink: can't create symlink $dest: $!\n";
-		    $force ? warn $msg : die $msg;		    
-		}
-	    } else {
-		local (*F, *G);
-		open F, $src or die "can't open $src for reading: $!\n";
-		open G, "> $dest" or $force or die "can't create $dest : $!\n";
-		local $_;
-		while (<F>) { print G $_ }
-		chmod((stat($src))[2], $dest);
-	    }
-	}
-    };
-    &$cp(@_);
-}
-
-sub ps {
-    @_ and die "usage: ps\n";
-    my ($pid, $rss, $cpu, $cmd);
-    my ($uptime) = split ' ', first(cat_("/proc/uptime"));
-    my $hertz = 100;
-
-    require c;
-    my $page = c::getpagesize() / 1024;
-
-    open PS, ">&STDOUT";
-    format PS_TOP =
-  PID   RSS %CPU CMD
-.
-    format PS =
-@>>>> @>>>> @>>> @<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
-$pid, $rss, $cpu, $cmd
-.
-    foreach $pid (sort {$a <=> $b} grep { /\d+/ } all('/proc')) {
-	 my @l = split(' ', cat_("/proc/$pid/stat"));
-	 $cpu = sprintf "%2.1f", max(0, min(99, ($l[13] + $l[14]) * 100 / $hertz / ($uptime - $l[21] / $hertz)));
-	 $rss = (split ' ', cat_("/proc/$pid/stat"))[23] * $page;
-	 (($cmd) = cat_("/proc/$pid/cmdline")) =~ s/\0/ /g;
-	 $cmd ||= (split ' ', (cat_("/proc/$pid/stat"))[0])[1];
-	 write PS;
-    }
-}
-
-
-sub dd {
-    my $u = "usage: dd [-h] [-p] [if=<file>] [of=<file>] [bs=<number>] [count=<number>]\n";
-    my ($help, $percent) = getopts(\@_, qw(hp));
-    die $u if $help;
-    my %h = (if => *STDIN, of => *STDOUT, bs => 512, count => undef);
-    foreach (@_) {
-	/(.*?)=(.*)/ && exists $h{$1} or die $u;
-	$h{$1} = $2;
-    }
-    local (*IF, *OF); my ($tmp, $nb, $read);
-    ref $h{if} eq 'GLOB' ? *IF = $h{if} : sysopen(IF, $h{if}, 0   ) || die "error: can't open file $h{if}\n";
-    ref $h{of} eq 'GLOB' ? *OF = $h{of} : sysopen(OF, $h{of}, 0x41) || die "error: can't open file $h{of}\n";
-
-    $h{bs} = removeXiBSuffix($h{bs});
-
-    for ($nb = 0; !$h{count} || $nb < $h{count}; $nb++) {
-	printf "\r%02.1d%%", 100 * $nb / $h{count} if $h{count} && $percent;
-	$read = sysread(IF, $tmp, $h{bs}) or $h{count} ? die "error: can't read block $nb\n" : last;
-	syswrite(OF, $tmp) or die "error: can't write block $nb\n";
-	$read < $h{bs} and $read = 1, last;
-    }
-    print STDERR "\r$nb+$read records in\n";
-    print STDERR   "$nb+$read records out\n";
-}
-
-sub head_tail {
-    my ($h, $n) = getopts(\@_, qw(hn));
-    $h || @_ < to_bool($n) and die "usage: $0 [-h] [-n lines] [<file>]\n";
-    $n = $n ? shift : 10;
-    local *F; @_ ? open(F, $_[0]) || die "error: can't open file $_[0]\n" : (*F = *STDIN);
-
-    local $_;
-    if ($0 eq 'head') {
-	while (<F>) { $n-- or return; print }
-    } else {
-	@_ = (); while (<F>) { push @_, $_; @_ > $n and shift; }
-	print @_;
-    }
-}
-sub head { $0 = 'head'; &head_tail }
-sub tail { $0 = 'tail'; &head_tail }
-
-sub strings {
-    my ($h, $o, $n) = getopts(\@_, qw(hon));
-    $h and die "usage: strings [-o] [-n min-length] [<files>]\n";
-    $n = $n ? shift : 4;
-    $/ = "\0"; @ARGV = @_; my $l = 0; while (<>) {
-	while (/[$printable_chars]{$n,}/og) {
-	    printf "%07d ", ($l + length $') if $o;
-	    print "$&\n" ;
-	}
-	$l += length;
-    } continue { $l = 0 if eof }
-}
-
-sub hexdump {
-    my $i = 0; $/ = \16; @ARGV = @_; while (<>) {
-	printf "%08lX  ", $i; $i += 16;
-	print join(" ", (map { sprintf "%02X", $_ } unpack("C*", $_)),
-		   ($_ =~ s/[^$printable_chars]/./og, $_)[1]), "\n";
-    }
-}
-
-sub more {
-    @ARGV = @_;
-    require devices;
-    my $tty = devices::make('tty');
-    local *IN; open IN, "<$tty" or die "can't open $tty\n";
-    my $n = 0; while (<>) {
-	if (++$n == 25) {
-	    my $v = <IN>;
-	    $v =~ /^q/ and exit 0;
-	    $n = 0;
-	}
-	print
-    }
-}
-
-sub pack_ {
-    my $t;
-    foreach (@_) {
-	if (-d $_) {
-	    pack_(glob_($_));
-	} else {
-	    print -s $_, "\n";
-	    print $_, "\n";
-
-	    local *F;
-	    open F, $_ or die "can't read file $_: $!\n";
-	    while (read F, $t, $BUFFER_SIZE) { print $t; }
-	}
-    }
-}
-
-sub unpack_ {
-    my $t;
-    @_ == 1 or die "give me one and only one file to unpack\n";
-    local *F;
-    open F, $_[0] or die "can't open file $_: $!\n";
-    while (1) {
-	my $size = chomp_(scalar <F>);
-	defined $size or last;
-	$size =~ /^\d+$/ or die "bad format (can't find file size)\n";
-	my $filename = chomp_(scalar <F>) or die "expecting filename\n";
-
-	print "$filename\n";
-	my $dir = dirname($filename);
-	-d $dir or mkdir_p($dir);
-
-	local *G;
-	open G, "> $filename" or die "can't write file $filename: $!\n";
-	while ($size) {
-	    $size -= read(F, $t, min($size, $BUFFER_SIZE)) || die "data for file $filename is missing\n";
-	    print G $t or die "error writing to file $filename: $!\n";
-	}
-    }
-}
-
-sub insmod {
-    my ($h) = getopts(\@_, qw(h));
-    $h || @_ == 0 and die "usage: insmod <module> [options]\n";
-    my $f = local $_ = shift;
-
-    require run_program;
-
-    #- try to install the module if it exist else extract it from archive.
-    #- needed for cardmgr.
-    unless (-r $f) {
-	$_ = $1 if m@.*/([^/]*)\.o@;
-	unless (-r ($f = "/lib/modules/$_.o")) {
-	    $f = "/tmp/$_.o";
-	    my $cz = "/lib/modules" . (arch() eq 'sparc64' && "64") . ".cz"; -e $cz or $cz .= "2";
-	    if (-e $cz) {
-		eval {
-		    require packdrake;
-		    my $packer = new packdrake($cz, quiet => 1);
-		    $packer->extract_archive("/tmp", "$_.o");
-		};
-	    } elsif (-e "/lib/modules.cpio.bz2") {
-		run_program::run("cd /tmp ; $ENV{LD_LOADER} bzip2 -cd /lib/modules.cpio.bz2 | $ENV{LD_LOADER} cpio -i $_.o");
-	    } else {
-		die "unable to find an archive for modules";
-	    }
-	}
-    }
-    -r $f or die "can't find module $_";
-    run_program::run(["/usr/bin/insmod_", "insmod"], "-f", $f, @_) or die("insmod $_ failed");
-    unlink $f;
-}
-
-sub modprobe {
-    my ($h) = getopts(\@_, qw(h));
-    $h || @_ == 0 and die "usage: modprobe <module> [options]\n";
-    my $name = shift;
-    require modules;
-    modules::load_deps("/modules/modules.dep");
-    modules::load($name, '', @_);
-}
-
-sub route {
-    @_ == 0 or die "usage: route\nsorry, no modification handled\n";
-    my ($titles, @l) = cat_("/proc/net/route");
-    my @titles = split ' ', $titles;
-    my %l;
-    open ROUTE, ">&STDOUT";
-    format ROUTE_TOP =
-Destination    Gateway        Mask           Iface
-.
-    format ROUTE =
-@<<<<<<<<<<<<  @<<<<<<<<<<<<  @<<<<<<<<<<<<  @<<<<<<<
-$l{Destination}, $l{Gateway}, $l{Mask}, $l{Iface}
-.
-    foreach (@l) {
-	/^\s*$/ and next;
-	@l{@titles} = split;
-	$_ = join ".", reverse map { hex } unpack "a2a2a2a2", $_ foreach @l{qw(Destination Gateway Mask)};
-	$l{Destination} = 'default' if $l{Destination} eq "0.0.0.0";
-	$l{Gateway}     = '*'       if $l{Gateway}     eq "0.0.0.0";
-	write ROUTE;
-    }
-}
-
-sub df {
-    my ($h) = getopts(\@_, qw(h));
-    my ($dev, $size, $free, $used, $use, $mntpoint);
-    open DF, ">&STDOUT";
-    format DF_TOP =
-Filesystem          Size      Used    Avail     Use  Mounted on
-.
-    format DF =
-@<<<<<<<<<<<<<<<< @>>>>>>> @>>>>>>> @>>>>>>> @>>>>>% @<<<<<<<<<<<<<<<<<<<<<<<<<
-$dev, $size, $used, $free, $use, $mntpoint
-.
-    my %h;
-    foreach (cat_("/proc/mounts"), cat_("/etc/mtab")) {
-	($dev, $mntpoint) = split;
-	$h{$dev} = $mntpoint;
-    }
-    foreach $dev (sort keys %h) {
-	($size, $free) = MDK::Common::System::df($mntpoint = $h{$dev});
-	$size or next;
-
-	$use = int (100 * ($size - $free) / $size);
-	$used = $size - $free;
-	if ($h) {
-	    $used = int ($used / 1024) . "M";
-	    $size = int ($size / 1024) . "M";
-	    $free = int ($free / 1024) . "M";
-	}
-	write DF if $size;
-    }
-}
-
-sub kill {
-    my $signal = 15;
-    @_ or die "usage: kill [-<signal>] pids\n";
-    $signal = (shift, $1)[1] if $_[0] =~ /^-(.*)/;
-    kill $signal, @_ or die "kill failed: $!\n";
-}
-
-sub lspci {
-    require detect_devices;
-    print join "\n", detect_devices::stringlist(1), '';
-}
-*lssbus = *lspci;
-
-sub dmesg { print cat_("/tmp/syslog"); }
-
-sub sort {
-    my ($n, $h) = getopts(\@_, qw(nh));
-    $h and die "usage: sort [-n] [<file>]\n";
-    local *F; @_ ? open(F, $_[0]) || die "error: can't open file $_[0]\n" : (*F = *STDIN);
-    if ($n) {
-	print sort { $a <=> $b } <F>;
-    } else {
-	print sort <F>;
-    }
-}
-
-sub du {
-    my ($s, $h) = getopts(\@_, qw(sh));
-    $h || !$s and die "usage: du -s [<directories>]\n";
-
-    my $f; $f = sub {
-	my ($e) = @_;
-	my $s = (lstat($e))[12];
-	$s += sum(map { &$f($_) } glob_("$e/*")) if !-l $e && -d $e;
-	$s;
-    };
-    print &$f($_) >> 1, "\t$_\n" foreach @_ ? @_ : glob_("*");
-}
-
-sub  install_cpio($$;@) {
-    my ($dir, $name, @more) = @_; 
-
-    return "$dir/$name" if -e "$dir/$name";
-
-    my $cpio = "$dir.cpio.bz2";
-    -e $cpio or return;
-
-    eval { rm("-r", $dir) };
-    mkdir $dir, 0755;
-    require run_program;
-    
-    my $more = join " ", map { $_ && "$_ $_/*" } @more;
-    run_program::run("cd $dir ; $ENV{LD_LOADER} bzip2 -cd $cpio | $ENV{LD_LOADER} cpio -id $name $name/* $more");
-
-    "$dir/$name";
-}
-
-sub bug {
-    my ($h) = getopts(\@_, "h");
-    $h and die "usage: bug\nput file report.bug on fat formatted floppy\n";
-
-    require detect_devices;
-    mount devices::make(detect_devices::floppy()), "/fd0";
-
-    require install_any;
-    output("/fd0/report.bug", install_any::report_bug("/mnt")); #- no other way :-(
-    umount "/fd0";
-    common::sync();
-}
-
-sub loadkeys {
-    my ($h) = getopts(\@_, "h");
-    $h || @_ != 1 and die "usage: loadkeys <keyboard>\n";
-
-    require keyboard;
-    keyboard::setup($_[0]);
-}
-
-sub sync { common::sync() }
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
-
diff --git a/perl-install/common.pm b/perl-install/common.pm
deleted file mode 100644
index 3dcacfb49..000000000
--- a/perl-install/common.pm
+++ /dev/null
@@ -1,136 +0,0 @@
-package common; # $Id$
-
-use MDK::Common;
-use MDK::Common::System;
-use diagnostics;
-use strict;
-use vars qw(@ISA @EXPORT $SECTORSIZE);
-
-@ISA = qw(Exporter);
-# no need to export ``_''
-@EXPORT = qw($SECTORSIZE __ translate untranslate formatXiB removeXiBSuffix formatTime setVirtual makedev unmakedev salt);
-
-# perl_checker: RE-EXPORT-ALL
-push @EXPORT, @MDK::Common::EXPORT;
-
-
-#-#####################################################################################
-#- Globals
-#-#####################################################################################
-$SECTORSIZE      = 512;
-
-#-#####################################################################################
-#- Functions
-#-#####################################################################################
-
-
-sub _ {
-    my $s = shift @_; my $t = translate($s);
-    sprintf $t, @_;
-}
-sub __ { $_[0] }
-
-sub salt {
-    my ($nb) = @_;
-    require devices;
-    local *F;
-    open F, devices::make("random") or die "missing random";
-    my $s; read F, $s, $nb;
-    local $_ = pack "b8" x $nb, unpack "b6" x $nb, $s;
-    tr [\0-\x3f] [0-9a-zA-Z./];
-    $_;
-}
-
-sub makedev { ($_[0] << 8) | $_[1] }
-sub unmakedev { $_[0] >> 8, $_[0] & 0xff }
-
-sub translate {
-    my ($s) = @_;
-    $s ? c::dgettext('libDrakX', $s) : '';
-}
-
-sub untranslate {
-    my $s = shift || return;
-    foreach (@_) { translate($_) eq $s and return $_ }
-    die "untranslate failed";
-}
-
-BEGIN { undef *availableRamMB }
-sub availableRamMB()  { 
-    my $s = MDK::Common::System::availableRamMB();
-    #- HACK HACK: if i810 and memsize
-    require detect_devices;
-    return $s - 1 if $s == 128 && grep { $_->{driver} =~ /i810/ } detect_devices::probeall();
-    $s;
-}
-
-sub setVirtual {
-    my $vt = '';
-    local *C;
-    sysopen C, "/dev/console", 2 or die "failed to open /dev/console: $!";
-    ioctl(C, c::VT_GETSTATE(), $vt) or die "ioctl VT_GETSTATE failed";
-    ioctl(C, c::VT_ACTIVATE(), $_[0]) or die "ioctl VT_ACTIVATE failed";
-    ioctl(C, c::VT_WAITACTIVE(), $_[0]) or die "ioctl VT_WAITACTIVE failed";
-    unpack "S", $vt;
-}
-
-
-sub removeXiBSuffix {
-    local $_ = shift;
-
-    /(\d+)\s*kB?$/i and return $1 * 1024;
-    /(\d+)\s*MB?$/i and return $1 * 1024 * 1024;
-    /(\d+)\s*GB?$/i and return $1 * 1024 * 1024 * 1024;
-    /(\d+)\s*TB?$/i and return $1 * 1024 * 1024 * 1024 * 1024;
-    $_;
-}
-sub formatXiB {
-    my ($newnb, $newbase) = (@_, 1);
-    my ($nb, $base);
-    my $decr = sub { 
-	($nb, $base) = ($newnb, $newbase);
-	$base >= 1024 ? ($newbase = $base / 1024) : ($newnb = $nb / 1024);
-    };
-    foreach ('', _("KB"), _("MB"), _("GB")) {
-	$decr->(); 
-	if ($newnb < 1 && $newnb * $newbase < 1) {
-	    my $v = $nb * $base;
-	    my $s = $v < 10 && int(10 * $v - 10 * int($v));
-	    return int($v) . ($s ? ".$s" : '') . $_;
-	}
-    }
-    int($newnb * $newbase) . _("TB");
-}
-
-sub formatTime {
-    my ($s, $m, $h) = gmtime($_[0]);
-    if ($h) {
-	sprintf "%02d:%02d", $h, $m;
-    } elsif ($m > 1) {
-	_("%d minutes", $m);
-    } elsif ($m == 1) {
-	_("1 minute");
-    } else {
-	_("%d seconds", $s);
-    }
-}
-
-sub usingRamdisk { scalar(grep { /ram3/ } cat_("/proc/mounts")) }
-
-sub expand_symlinks_but_simple {
-    my ($f) = @_;
-    my $link = readlink($f);
-    my $f2 = expand_symlinks($f);
-    if ($link && $link !~ m|/|) {
-	# put back the last simple symlink
-	$f2 =~ s|\Q$link\E$|basename($f)|e;
-    }
-    $f2
-}
-
-sub sync { &MDK::Common::System::sync }
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
diff --git a/perl-install/crypto.pm b/perl-install/crypto.pm
deleted file mode 100644
index 74200ddeb..000000000
--- a/perl-install/crypto.pm
+++ /dev/null
@@ -1,71 +0,0 @@
-package crypto; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use log;
-use ftp;
-
-my %mirrors = (
- "ftp.ucr.ac.cr" => [ "Costa Rica", "/pub/Unix/linux/mandrake/Mandrake" ],
- "ftp.nectec.or.th" => [ "Thailand", "/pub/mirrors/Mandrake-crypto" ],
- "ftp.tvd.be" => [ "Belgium", "/packages/mandrake-crypto" ],
- "sunsite.mff.cuni.cz" => [ "Czech Republic", "/OS/Linux/Dist/Mandrake-crypto" ],
- "ftp.uni-kl.de" => [ "Germany", "/pub/linux/mandrake/Mandrake-crypto" ],
- "ftp.duth.gr" => [ "Grece", "/pub/mandrake-crypto" ],
- "ftp.leo.org" => [ "Germany", "/pub/comp/os/unix/linux/Mandrake/Mandrake-crypto" ],
- "sunsite.uio.no" => [ "Norway", "/pub/unix/Linux/Mandrake-crypto" ],
- "ftp.sunet.se" => [ "Sweden", "/pub/Linux/distributions/mandrake-crypto" ],
-#- "ackbar" => [ "Ackbar", "/crypto", "a", "a" ],
-);
-
-my %deps = (
-  'libcrypto.so.0' => 'openssl',
-  'libssl.so.0' => 'openssl',
-  'mod_sxnet.so' => 'mod_ssl-sxnet',
-);
-
-sub require2package { $deps{$_[0]} || $_[0] }
-sub mirror2text($) { $mirrors{$_[0]} && "$mirrors{$_[0]}[0] ($_[0])" }
-sub mirrors() { keys %mirrors }
-sub dir { $mirrors{$_[0]}[1] . '/' . (arch() !~ /i.86/ && ((arch() =~ /sparc/ ? "sparc" : arch()). '/')) . $::VERSION }
-sub ftp($) { ftp::new($_[0], dir($_[0])) }
-
-sub getFile {
-    my ($file, $host) = @_;
-    $host ||= $crypto::host;
-    log::l("getting crypto file $file on directory " . dir($host) . " with login $mirrors{$host}[2]");
-    my ($ftp, $retr) = ftp::new($host, dir($host),
-				$mirrors{$host}[2] ? $mirrors{$host}[2] : (),
-				$mirrors{$host}[3] ? $mirrors{$host}[3] : ()
-			       );
-    $$retr->close if $$retr;
-    $$retr   = $ftp->retr($file) or ftp::rewindGetFile();
-    $$retr ||= $ftp->retr($file);
-}
-
-sub getDepslist { getFile("depslist-crypto", $_[0]) or die "unable to get depslist-crypto" }
-
-sub getPackages {
-    my ($prefix, $packages, $mirror) = @_;
-
-    $crypto::host = $mirror;
-
-    #- extract hdlist of crypto, then depslist.
-    require pkgs;
-    pkgs::psUsingHdlist($prefix, '', $packages, "hdlist-crypto.cz2", "crypto.cz2", "Crypto", "Cryptographic site", 1, getFile("hdlist-crypto.cz2", $mirror)) and
-	pkgs::getOtherDeps($packages, getDepslist($mirror));
-
-    #- produce an output suitable for visualization.
-    map { pkgs::packageName($_) } pkgs::packagesOfMedium($packages, "Crypto");
-}
-
-sub get {
-    my ($mirror, $dir, @files) = @_;
-    foreach (@files) {
-	log::l("crypto: downloading $_");
-	ftp($mirror)->get($_, "$dir/$_") 
-    }
-    int @files;
-}
diff --git a/perl-install/detect_devices.pm b/perl-install/detect_devices.pm
deleted file mode 100644
index 0fa9297aa..000000000
--- a/perl-install/detect_devices.pm
+++ /dev/null
@@ -1,451 +0,0 @@
-package detect_devices; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use log;
-use common;
-use devices;
-use c;
-
-#-#####################################################################################
-#- Globals
-#-#####################################################################################
-my @netdevices = map { my $l = $_; map { "$l$_" } (0..3) } qw(eth tr fddi plip);
-my %serialprobe = ();
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub get {
-    #- Detect the default BIOS boot harddrive is kind of tricky. We may have IDE,
-    #- SCSI and RAID devices on the same machine. From what I see so far, the default
-    #- BIOS boot harddrive will be
-    #- 1. The first IDE device if IDE exists. Or
-    #- 2. The first SCSI device if SCSI exists. Or
-    #- 3. The first RAID device if RAID exists.
-
-    getIDE(), getSCSI(), getDAC960(), getCompaqSmartArray(), getATARAID();
-}
-sub hds() { grep { $_->{media_type} eq 'hd' && ($::isStandalone || !isRemovableDrive($_)) } get(); }
-sub zips() { grep { $_->{media_type} =~ /.d/ && isZipDrive($_) } get(); }
-sub ide_zips() { grep { $_->{media_type} =~ /.d/ && isZipDrive($_) } getIDE(); }
-#-sub jazzs() { grep { $_->{media_type} =~ /.d/ && isJazDrive($_) } get(); }
-sub ls120s() { grep { $_->{media_type} =~ /.d/ && isLS120Drive($_) } get(); }
-sub cdroms() { 
-    my @l = grep { $_->{media_type} eq 'cdrom' } get(); 
-    if (my @l2 = IDEburners()) {
-	require modules;
-	modules::add_alias('scsi_hostadapter', 'ide-scsi');
-	my $nb = 1 + max(-1, map { $_->{device} =~ /scd(\d+)/ } @l);
-	foreach my $i (@l2) {	    
-	    log::l("IDEBurner: $i->{device}");
-	    my ($e) = grep { $_->{device} eq $i->{device} } @l;
-	    $e->{device} = "scd" . $nb++;
-	}
-    }
-    @l;
-}
-sub burners    { grep { $_->{media_type} eq 'cdrom' && isBurner($_) } get() }
-sub IDEburners { grep { $_->{media_type} eq 'cdrom' && isBurner($_) } getIDE() }
-sub dvdroms    { grep { $_->{media_type} eq 'cdrom' && isDvdDrive($_) } get() }
-
-sub get_mac_model() {
-    my $mac_model = cat_("/proc/device-tree/model") || die "Can't open /proc/device-tree/model";
-    log::l("Mac model: $mac_model");
-    $mac_model;	
-}
-
-sub get_mac_generation() {
-    my $generation = cat_("/proc/cpuinfo") || die "Can't open /proc/cpuinfo";
-    my @genarray = split(/\n/, $generation);
-    my $count = 0;
-    while ($count <= @genarray) {
-	if ($genarray[$count] =~ /pmac-generation/) {
-	    @genarray = split(/:/, $genarray[$count]);
-	    return $genarray[1];
-	}
-	$count++;
-    }
-    return "Unknown Generation";	
-}
-
-sub dev_is_devfs { -e "/dev/.devfsd" }
-
-sub floppies() {
-    require modules;
-    eval { modules::load("floppy") };
-    my @fds = map {
-	my $info = (!dev_is_devfs() || -e "/dev/$_") && c::floppy_info(devices::make($_));
-	if_($info && $info ne '(null)', { device => $_, media_type => 'fd', info => $info })
-    } qw(fd0 fd1);
-    my @ide = ls120s() and eval { modules::load("ide-floppy") };
-
-    eval { modules::load("usb-storage") } if usbStorage();
-    my @scsi = grep { $_->{media_type} eq 'fd' } getSCSI();
-    @ide, @scsi, @fds;
-}
-sub floppies_dev() { map { $_->{device} } floppies() }
-sub floppy { first(floppies_dev()) }
-#- example ls120, model = "LS-120 SLIM 02 UHD Floppy"
-
-sub isBurner { 
-    my $dev = $_[0]{device};
-    if (my($nb) = $dev =~ /scd(.*)/) {
-	grep { /^(scd|sr)$nb:.*writer/ } syslog();
-    } else {
-	my $f = tryOpen($dev); #- SCSI burner are not detected this way.
-	$f && c::isBurner(fileno($f));
-    }
-}
-sub isDvdDrive {
-    $_[0]{info} =~ /DVD/; #- SCSI DVD seems not to be detected correctly, so use another probe after.
-    my $f = tryOpen($_[0]{device});
-    $f && c::isDvdDrive(fileno($f));
-}
-sub isZipDrive { $_[0]->{info} =~ /ZIP\s+\d+/ } #- accept ZIP 100, untested for bigger ZIP drive.
-#-sub isJazzDrive { $_[0]->{info} =~ /JAZZ?\s+/ } #- untested.
-sub isLS120Drive { $_[0]->{info} =~ /LS-?120|144MB/ }
-sub isRemovableDrive { &isZipDrive || &isLS120Drive || $_[0]->{media_type} eq 'fd' } #-or &isJazzDrive }
-
-sub isFloppyOrHD {
-    my ($dev) = @_;
-    require partition_table_raw;
-    my $geom = partition_table_raw::get_geometry(devices::make($dev));
-    $geom->{totalsectors} < 10 << 11 ? 'fd' : 'hd';
-}
-
-sub getSCSI() {
-    my @drives;
-    my ($driveNum, $cdromNum, $tapeNum) = qw(0 0 0);
-    my $err = sub { chop; die "unexpected line in /proc/scsi/scsi: $_"; };
-    local $_;
-
-    local *F;
-    open F, "/proc/scsi/scsi" or return;
-    local $_ = <F>; /^Attached devices:/ or return &$err();
-    while ($_ = <F>) {
-	my ($id) = /^Host:.*?Id: (\d+)/ or return &$err();
-	$_ = <F>; my ($vendor, $model) = /^\s*Vendor:\s*(.*?)\s+Model:\s*(.*?)\s+Rev:/ or return &$err();
-	$_ = <F>; my ($type) = /^\s*Type:\s*(.*)/ or &$err();
-	my $device;
-	if ($type =~ /Direct-Access/) { #- what about LS-120 floppy drive, assuming there are Direct-Access...
-	    $device = "sd" . chr($driveNum++ + ord('a'));
-	    $type = isFloppyOrHD($device);
-	} elsif ($type =~ /Sequential-Access/) {
-	    $device = "st" . $tapeNum++;
-	    $type = 'tape';
-	} elsif ($type =~ /CD-ROM/) {
-	    $device = "scd" . $cdromNum++;
-	    $type = 'cdrom';
-	}
-	$device and push @drives, { device => $device, media_type => $type, info => "$vendor $model", id => $id, bus => 0 };
-    }
-    @drives;
-}
-
-sub getIDE() {
-    my @idi;
-
-    #- what about a system with absolutely no IDE on it, like some sparc machine.
-    -e "/proc/ide" or return ();
-
-    #- Great. 2.2 kernel, things are much easier and less error prone.
-    foreach my $d (sort @{[glob_('/proc/ide/hd*')]}) {
-	cat_("$d/driver") =~ /ide-scsi/ and next; #- already appears in /proc/scsi/scsi
-	my $t = chomp_(cat_("$d/media"));
-	my $type = $ {{disk => 'hd', cdrom => 'cdrom', tape => 'tape', floppy => 'fd'}}{$t} or next;
-	my $info = chomp_(cat_("$d/model")) || "(none)";
-
-	my $num = ord (($d =~ /(.)$/)[0]) - ord 'a';
-	push @idi, { media_type => $type, device => basename($d), info => $info, bus => $num/2, id => $num%2 };
-    }
-    @idi;
-}
-
-sub getCompaqSmartArray() {
-    my (@idi, $f);
-
-    foreach ('array/ida', 'cpqarray/ida', 'cciss/cciss') {
-	my $prefix = "/proc/driver/$_"; #- kernel 2.4 places it here
-	$prefix = "/proc/$_" if !-e "${prefix}0"; #- kernel 2.2
-
-	my ($name) = m|/(.*)|;
-	for (my $i = 0; -r ($f = "${prefix}$i"); $i++) {
-	    foreach (cat_($f)) {
-		if (m|^\s*($name/.*?):|) {
-		    push @idi, { device => $1, info => "Compaq RAID logical disk", media_type => 'hd' };
-		}
-	    }
-	}
-    }
-    @idi;
-}
-
-sub getDAC960() {
-    my %idi;
-
-    #- We are looking for lines of this format:DAC960#0:
-    #- /dev/rd/c0d0: RAID-7, Online, 17928192 blocks, Write Thru0123456790123456789012
-    foreach (syslog()) {
-	my ($device, $info) = m|/dev/(rd/.*?): (.*?),| or next;
-	$idi{$device} = { info => $info, media_type => 'hd', device => $device };
-    }
-    values %idi;
-}
-
-sub getATARAID {
-    my %l;
-    foreach (syslog()) {
-	my ($device) = m|^\s*(ataraid/d\d+):| or next;
-	$l{$device} = { info => 'ATARAID block device', media_type => 'hd', device => $device };
-	log::l("ATARAID: $device");
-    }
-    values %l;
-}
-
-sub getNet() {
-#      my @a;
-#      foreach (@netdevices) {
-#  	$::isStandalone && /plip/ and next;
-#  	print (" hhhhh $_ \n");
-#  	/ippp/ and run_program::rooted("", "/sbin/isdnctrl addif $_");
-#  	c::hasNetDevice($_) and push @a, $_;
-#      }
-#      /ippp/ and run_program::rooted("", "/sbin/isdnctrl delif $_") foreach @netdevices;
-#      @a;
-    grep { !(($::isStandalone || $::live) && /plip/) && c::hasNetDevice($_) } @netdevices;
-}
-
-#sub getISDN() {
-#    mapgrep(sub {member (($_[0] =~ /\s*(\w*):/), @netdevices), $1 }, split(/\n/, cat_("/proc/net/dev")));
-#}
-
-sub pci_probe {
-    my ($probe_type) = @_;
-    log::l("full pci_probe") if $probe_type;
-    map {
-	my %l;
-	@l{qw(vendor id subvendor subid pci_bus pci_device pci_function media_type driver description)} = split "\t";
-	$l{$_} = hex $l{$_} foreach qw(vendor id subvendor subid);
-	$l{bus} = 'PCI';
-	\%l
-    } c::pci_probe($probe_type || 0);
-}
-
-sub usb_probe {
-    -e "/proc/bus/usb/devices" or return ();
-
-    map {
-	my %l;
-	@l{qw(vendor id media_type driver description)} = split "\t";
-	$l{$_} = hex $l{$_} foreach qw(vendor id);
-	$l{bus} = 'USB';
-	\%l
-    } c::usb_probe();
-}
-
-sub pcmcia_probe {
-    -e "/var/run/stab" or return ();
-
-    my (@devs, $desc);
-    foreach (cat_("/var/run/stab")) {
-	if (/^Socket\s+\d+:\s+(.*)/) {
-	    $desc = $1;
-	} else {
-	    my (undef, $type, $module, undef, $device) = split;
-	    push @devs, { description => $desc, driver => $module, type => $type, device => $device };
-	}
-    }
-    @devs;
-}
-
-# pci_probe with $probe_type is unsafe for pci! (bug in kernel&hardware)
-# pcmcia_probe provides field "device", used in network.pm
-# => probeall with $probe_type is unsafe
-sub probeall {
-    my ($probe_type) = @_;
-    require sbus_probing::main;
-    pci_probe($probe_type), usb_probe(), pcmcia_probe(), sbus_probing::main::probe();
-}
-sub matching_desc {
-    my ($regexp) = @_;
-    grep { $_->{description} =~ /$regexp/i } probeall();
-}
-sub stringlist { 
-    map {
-	sprintf("%-16s: %s%s%s", 
-		$_->{driver} ? $_->{driver} : 'unknown', 
-		$_->{description} eq '(null)' ? sprintf("Vendor=0x%04x Device=0x%04x", $_->{vendor}, $_->{id}) : $_->{description},
-		$_->{media_type} ? sprintf(" [%s]", $_->{media_type}) : '',
-		$_->{subid} && $_->{subid} != 0xffff ? sprintf(" SubVendor=0x%04x SubDevice=0x%04x", $_->{subvendor}, $_->{subid}) : '',
-	       );
-    } probeall(@_); 
-}
-sub check {
-    my ($l) = @_;
-    my $ok = $l->{driver} !~ /(unknown|ignore)/;
-    $ok or log::l("skipping $l->{description}, no module available (if you know one, please mail install\@mandrakesoft.com)");
-    $ok
-}
-
-
-sub tryOpen($) {
-    local *F;
-    sysopen F, devices::make($_[0]), c::O_NONBLOCK() and *F;
-}
-
-sub tryWrite($) {
-    local *F;
-    sysopen F, devices::make($_[0]), 1 | c::O_NONBLOCK() and *F;
-}
-
-sub syslog {
-    -r "/tmp/syslog" and return map { /<\d+>(.*)/ } cat_("/tmp/syslog");
-    `$ENV{LD_LOADER} /bin/dmesg`;
-}
-
-sub hasSMP { c::detectSMP() }
-sub hasPCMCIA { $::o->{pcmcia} } #- because /proc/pcmcia seems not to be present on 2.4 at least (or use /var/run/stab)
-
-#- try to detect a laptop, we assume pcmcia service is an indication of a laptop or
-#- the following regexp to match graphics card apparently only used for such systems.
-sub isLaptop {
-    hasPCMCIA() || (matching_desc('C&T.*655[45]\d') || matching_desc('C&T.*68554') ||
-		    matching_desc('Neomagic.*Magic(Media|Graph)') ||
-		    matching_desc('ViRGE.MX') || matching_desc('S3.*Savage.*[IM]X') ||
-		    matching_desc('ATI.*(Mobility|LT)'));
-}
-
-sub hasUltra66 {
-    die "hasUltra66 deprecated";
-    #- keep it BUT DO NOT USE IT as now included in kernel.
-    cat_("/proc/cmdline") =~ /(ide2=(\S+)(\s+ide3=(\S+))?)/ and return $1;
-
-    my @l = map { $_->{verbatim} } matching_desc('HPT|Ultra66') or return;
-    
-    my $ide = sprintf "ide2=0x%x,0x%x ide3=0x%x,0x%x",
-      @l == 2 ?
-	(map_index { hex($_) + (odd($::i) ? 1 : -1) } map { (split ' ')[3..4] } @l) :
-	(map_index { hex($_) + (odd($::i) ? 1 : -1) } map { (split ' ')[3..6] } @l);
-
-    log::l("HPT|Ultra66: found $ide");
-    $ide;
-}
-
-sub whatParport() {
-    my @res = ();
-    foreach (0..3) {
-	my $elem = {};
-	local *F;
-	open F, "/proc/parport/$_/autoprobe" or open F, "/proc/sys/dev/parport/parport$_/autoprobe" or next;
-	{
-	    local $_;
-	    while (<F>) { $elem->{$1} = $2 if /(.*):(.*);/ }
-	}
-	push @res, { port => "/dev/lp$_", val => $elem};
-    }
-    @res;
-}
-
-sub usbMice      { grep { $_->{media_type} =~ /\|Mouse/ && $_->{driver} !~ /Tablet:wacom/} usb_probe() }
-sub usbWacom     { grep { $_->{driver} =~ /Tablet:wacom/ } usb_probe() }
-sub usbKeyboards { grep { $_->{media_type} =~ /\|Keyboard/ } usb_probe() }
-sub usbStorage   { grep { $_->{media_type} =~ /Mass Storage\|/ } usb_probe() }
-
-sub whatUsbport() {
-    my ($i, $elem, @res) = (0, {});
-    foreach (grep { $_->{media_type} =~ /Printer/ } usb_probe()) {
-	my ($manufacturer, $model) = split '\|', $_->{description};
-	$_->{description} =~ s/Hewlett[-\s_]Packard/HP/;
-	push @res, { port => "/dev/usb/lp$i", val => { CLASS => 'PRINTER',
-						       MODEL => $model,
-						       MANUFACTURER => $manufacturer,
-						       DESCRIPTION => $_->{description},
-						     }};
-	++$i;
-    }
-    @res;
-}
-
-#-CLASS:PRINTER;
-#-MODEL:HP LaserJet 1100;
-#-MANUFACTURER:Hewlett-Packard;
-#-DESCRIPTION:HP LaserJet 1100 Printer;
-#-COMMAND SET:MLC,PCL,PJL;
-sub whatPrinter() {
-    my @res = (whatParport(), whatUsbport());
-    grep { $_->{val}{CLASS} eq "PRINTER"} @res;
-}
-
-sub whatPrinterPort() {
-    grep { tryWrite($_)} qw(/dev/lp0 /dev/lp1 /dev/lp2 /dev/usb/lp0 /dev/usb/lp1 /dev/usb/lp2);
-}
-
-sub probeSerialDevices {
-    #- make sure the device are created before probing.
-    foreach (0..3) { devices::make("/dev/ttyS$_") }
-
-    #- for device already probed, we can safely (assuming device are
-    #- not moved during install :-)
-    #- include /dev/mouse device if using an X server.
-    -d "/var/lock" or mkdir "/var/lock", 0755;
-    -l "/dev/mouse" and $serialprobe{"/dev/" . readlink "/dev/mouse"} = undef;
-    foreach (keys %serialprobe) { m|^/dev/(.*)| and touch "/var/lock/LCK..$1" }
-
-    print STDERR "Please wait while probing serial ports...\n";
-    #- start probing all serial ports... really faster than before ...
-    #- ... but still take some time :-)
-    local *F; open F, "$ENV{LD_LOADER} serial_probe |";
-    local $_;
-    my %current = (); while (<F>) {
-	$serialprobe{$current{DEVICE}} = { %current } and %current = () if /^\s*$/ && $current{DEVICE};
-	$current{$1} = $2 if /^([^=]+)=(.*?)\s*$/;
-    }
-    close F;
-
-    foreach (values %serialprobe) {
-	$_->{DESCRIPTION} =~ /modem/i and $_->{CLASS} = 'MODEM'; #- hack to make sure a modem is detected.
-	$_->{DESCRIPTION} =~ /olitec/i and $_->{CLASS} = 'MODEM'; #- hack to make sure such modem gets detected.
-	log::l("probed $_->{DESCRIPTION} of class $_->{CLASS} on device $_->{DEVICE}");
-    }
-}
-
-sub probeSerial($) { $serialprobe{$_[0]} }
-
-sub hasModem($) {
-    $serialprobe{$_[0]} and $serialprobe{$_[0]}{CLASS} eq 'MODEM' and $serialprobe{$_[0]}{DESCRIPTION};
-}
-
-sub hasMousePS2 {
-    my $t; sysread(tryOpen($_[0]) || return, $t, 256) != 1 || $t ne "\xFE";
-}
-
-sub raidAutoStartIoctl {
-    eval { modules::load('md') };
-    my $md = devices::make("md0");
-    local *F;
-    sysopen F, $md, 2 or return;
-    ioctl F, 2324, 0;
-}
-
-sub raidAutoStart {
-    log::l("raidAutoStart");
-    my %personalities = ( '1' => 'linear', '2' => 'raid0', '3' => 'raid1', '4' => 'raid5' );
-    raidAutoStartIoctl() or log::l("warning, RAID_AUTORUN not supported by kernel"), return;
-    if (my @needed_perso = map { if_(/^kmod: failed.*md-personality-(.)/, $personalities{$1}) } syslog()) {
-	log::l("RAID: autostart needs personality from $_"), eval { modules::load($_) } foreach @needed_perso;
-	return raidAutoStartIoctl();
-    } else {
-	1;
-    }
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
-
diff --git a/perl-install/devices.pm b/perl-install/devices.pm
deleted file mode 100644
index 7228f9410..000000000
--- a/perl-install/devices.pm
+++ /dev/null
@@ -1,157 +0,0 @@
-package devices; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use run_program;
-use log;
-use c;
-
-sub size($) {
-    local *F;
-    sysopen F, $_[0], 0 or log::l("open $_[0]: $!"), return 0;
-
-    my $valid_offset = sub { sysseek(F, $_[0], 0) && sysread(F, my $a, 1) };
-
-    #- first try getting the size nicely
-    my $size = 0;
-    ioctl(F, c::BLKGETSIZE(), $size) and return unpack("i", $size) * $common::SECTORSIZE;
-
-    #- sad it didn't work, well searching the size using the dichotomy algorithm!
-    my $low = 0;
-    my ($high, $mid);
-
-    #- first find n where 2^n < size <= 2^n+1
-    for ($high = 1; $high > 0 && &$valid_offset($high); $high *= 2) { $low = $high; }
-
-    while ($low < $high - 1) {
-	$mid = int ($low + $high) / 2;
-	&$valid_offset($mid) ? $low : $high = $mid;
-    }
-    $low + 1;
-}
-
-sub set_loop {
-    my ($file) = @_;
-
-    foreach (0..7) {
-	local *F;
-	my $dev = make("loop$_");
-	sysopen F, $dev, 2 or next;
-	!ioctl(F, c::LOOP_GET_STATUS(), my $tmp) && $! == 6 or next; #- 6 == ENXIO
-	log::l("trying with loop $dev");
-	return c::set_loop(fileno F, $file) && $dev;
-    }
-}
-
-sub entry {
-    my ($type, $major, $minor);
-    local ($_) = @_;
-
-    if (/^0x([\da-f]{3,4})$/i) {
-	$type = c::S_IFBLK();
-	($major, $minor) = unmakedev(hex $1);
-    } elsif (/^sd(.)(\d{0,2})/) {
-	$type = c::S_IFBLK();
-	$major = 8;
-	$minor = 16 * (ord($1) - ord('a')) + ($2 || 0);
-    } elsif (/^hd(.)(\d{0,2})/) {
-	$type = c::S_IFBLK();
-	($major, $minor) =
-	    @{ $ {{'a' => [3, 0], 'b' => [3, 64],
-		   'c' => [22,0], 'd' => [22,64],
-		   'e' => [33,0], 'f' => [33,64],
-		   'g' => [34,0], 'h' => [34,64],
-		   'i' => [56,0], 'j' => [56,64],
-		   'k' => [57,0], 'l' => [57,64],
-                   'm' => [88,0], 'n' => [88,64],
-                   'o' => [89,0], 'p' => [89,64],
-                   'q' => [90,0], 'r' => [90,64],
-                   's' => [91,0], 't' => [91,64],
-	       }}{$1} or die "unknown device $_" };
-	$minor += $2 || 0;
-    } elsif (/^ram(.*)/) {
-	$type = c::S_IFBLK();
-	$major = 1;
-	$minor = $1 eq '' ? 1 : $1;
-    } elsif (m|^rd/c(\d+)d(\d+)(p(\d+))?|) {
-	# dac 960 "rd/cXdXXpX"
-        $type = c::S_IFBLK();
-	$major = 48 + $1;
-	$minor = 8 * $2 + $4;
-    } elsif (m,(ida|cciss)/c(\d+)d(\d+)(?:p(\d+))?,) {
-	# Compaq Smart Array "ida/c0d0{p1}"
-	$type = c::S_IFBLK();
-	$major = ($1 eq 'ida' ? 72 : 104) + $2;
-	$minor = 16 * $3 + ($4 || 0);
-    } elsif (m,(ataraid)/d(\d+)(?:p(\d+))?,) {
-	# ATA raid "ataraid/d0{p1}"
-	$type = c::S_IFBLK();
-	$major = 114;
-	$minor = 16 * $1 + ($2 || 0);
-    } elsif (/(.*)(\d+)$/) {
-	    ($type, $major, $minor) =
-	     @{ ${{"fd"          => [ c::S_IFBLK(), 2,  0 ],
-		   "hidbp-mse-"  => [ c::S_IFCHR(), 10, 32 ],
-		   "lp"          => [ c::S_IFCHR(), 6,  0 ],
-		   "usb/lp"      => [ c::S_IFCHR(), 180, 0 ],
-		   "input/event" => [ c::S_IFCHR(), 13, 64 ],
-		   "loop"        => [ c::S_IFBLK(), 7,  0 ],
-		   "md"          => [ c::S_IFBLK(), 9,  0 ],
-		   "nst"         => [ c::S_IFCHR(), 9, 128],
-		   "scd"         => [ c::S_IFBLK(), 11, 0 ],
-		   "ttyS"        => [ c::S_IFCHR(), 4, 64 ],
-	       }}{$1}};
-	    $minor += $2;
-    }
-    unless ($type) {
-	($type, $major, $minor) =
-	     @{ ${{"aztcd"   => [ c::S_IFBLK(), 29, 0 ],
-		   "bpcd"    => [ c::S_IFBLK(), 41, 0 ],
-		   "cdu31a"  => [ c::S_IFBLK(), 15, 0 ],
-		   "cdu535"  => [ c::S_IFBLK(), 24, 0 ],
-		   "cm206cd" => [ c::S_IFBLK(), 32, 0 ],
-		   "gscd"    => [ c::S_IFBLK(), 16, 0 ],
-		   "mcd"     => [ c::S_IFBLK(), 23, 0 ],
-		   "mcdx"    => [ c::S_IFBLK(), 20, 0 ],
-		   "mem"     => [ c::S_IFCHR(), 1,  1 ],
-		   "optcd"   => [ c::S_IFBLK(), 17, 0 ],
-		   "kbd"     => [ c::S_IFCHR(), 11, 0 ],
-		   "psaux"   => [ c::S_IFCHR(), 10, 1 ],
-		   "random"  => [ c::S_IFCHR(), 1,  8 ],
-		   "sbpcd"   => [ c::S_IFBLK(), 25, 0 ],
-		   "sjcd"    => [ c::S_IFBLK(), 18, 0 ],
-		   "tty"     => [ c::S_IFCHR(),  5, 0 ],
-		   "usbmouse"=> [ c::S_IFCHR(), 13, 63], #- aka /dev/input/mice
-		   "adbmouse"=> [ c::S_IFCHR(), 10, 10], #- PPC
-		   "zero"    => [ c::S_IFCHR(), 1,  5 ],		     
-	       }}{$_} or die "unknown device $_ (caller is " . join(":", caller()) . ")" };
-    }
-    ($type, $major, $minor);
-}
-
-
-sub make($) {
-    local $_ = my $file = $_[0];
-
-    if (m,^(.*/(?:dev|tmp))/(.*),) {
-	$_ = $2;
-    } else {
-	$file =~ m|^/| && -e $file or $file = "/tmp/$_";
-	$file =~ m|^/| && -e $file or $file = "/dev/$_";
-    }
-    -e $file and return $file; #- assume nobody takes fun at creating files named as device
-
-    my ($type, $major, $minor) = eval { entry($_) };
-    $@ and die "unknown device $_ (caller is " . join(":", caller()) . ")";
-
-    #- make a directory for this inode if needed.
-    mkdir dirname($file), 0755;
-
-    syscall_('mknod', $file, $type | 0600, makedev($major, $minor)) or die "mknod failed (dev $_): $!";
-
-    $file;
-}
-
-1;
diff --git a/perl-install/do_resize_fat b/perl-install/do_resize_fat
deleted file mode 100755
index 41ebf1b83..000000000
--- a/perl-install/do_resize_fat
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/usr/bin/perl
-
-use diagnostics;
-use strict;
-
-use lib qw(/usr/lib/libDrakX);
-use common;
-use resize_fat::main;
-
-local *log::l = sub { print join(' ', @_), "\n" };
-
-@ARGV = qw(/mnt/iso/w +0);
-
-@ARGV == 2 or die "usage: fatresize <device> <size>\n  <size> = 100 means `resize to 100Mb'\n  <size> = +10 means `keep 10Mb of free space'\n";
-
-my $fs = new resize_fat::main(common::basename($ARGV[0]), $ARGV[0]);
-resize_fat::main::resize($fs, $ARGV[1]);
-
diff --git a/perl-install/fs.pm b/perl-install/fs.pm
deleted file mode 100644
index 88792c312..000000000
--- a/perl-install/fs.pm
+++ /dev/null
@@ -1,757 +0,0 @@
-package fs; # $Id$
-
-use diagnostics;
-use strict;
-
-use MDK::Common::System;
-use common;
-use log;
-use devices;
-use partition_table qw(:types);
-use run_program;
-use swap;
-use detect_devices;
-use modules;
-use fsedit;
-use loopback;
-
-
-sub read_fstab {
-    my ($prefix, $file, $all_options) = @_;
-
-    map {
-	my ($dev, $mntpoint, $type, $options, $freq, $passno) = split;
-
-	$options = 'defaults' if $options eq 'rw'; # clean-up for mtab read
-
-	$type = fs2type($type);
-	if ($type eq 'supermount') {
-	    # normalize this bloody supermount
-	    $options = join(",", 'supermount', grep {
-		if (/fs=(.*)/) {
-		    $type = $1;
-		    0;
-		} elsif (/dev=(.*)/) {
-		    $dev = $1;
-		    0;
-		} elsif ($_ eq '--') {
-		    0;
-		} else {
-		    1;
-		}
-	    } split(',', $options));
-	}
-	my $h = { device => $dev, mntpoint => $mntpoint, type => $type, options => $options, if_($all_options, freq => $freq, passno => $passno) };
-
-	($h->{major}, $h->{minor}) = unmakedev((stat "$prefix$dev")[6]);
-
-	if ($dev =~ m,/(tmp|dev)/,) {
-	    my $symlink = readlink("$prefix$dev");
-	    $dev =~ s,/(tmp|dev)/,,;
-
-	    if ($symlink =~ m|^[^/]+$|) {
-		$h->{device_alias} = $dev;
-		$h->{device} = $symlink;
-	    } else {
-		$h->{device} = $dev;
-	    }
-	}
-	$h;
-    } cat_("$prefix$file");
-}
-
-sub merge_fstabs {
-    my ($fstab, @l) = @_;
-
-    foreach my $p (@$fstab) {
-	my ($p2) = grep { fsedit::is_same_hd($_, $p) } @l or next;
-	@l       = grep { !fsedit::is_same_hd($_, $p) } @l;
-
-	$p->{type} && $p2->{type} && $p->{type} ne $p2->{type} && type2fs($p) ne type2fs($p2) && $p->{type} ne 'auto' && $p2->{type} ne 'auto' and
-	  log::l("err, fstab and partition table do not agree for $p->{device} type: " . (type2fs($p) || type2name($p->{type})) . " vs ", (type2fs($p2) || type2name($p2->{type}))), next;
-	
-	$p->{mntpoint} = $p2->{mntpoint} if delete $p->{unsafeMntpoint};
-
-	$p->{type} ||= $p2->{type};
-	$p->{options} = $p2->{options} if $p->{type} eq 'defaults';
-	add2hash($p, $p2);
-	$p->{device_alias} ||= $p2->{device_alias} || $p2->{device} if $p->{device} ne $p2->{device} && $p2->{device} !~ m|/|;
-    }
-    @l;
-}
-
-sub add2all_hds {
-    my ($all_hds, @l) = @_;
-
-    @l = merge_fstabs([ fsedit::get_really_all_fstab($all_hds) ], @l);
-
-    foreach (@l) {
-	my $s = 
-	    isNfs($_) ? 'nfss' :
-	    isThisFs('smbfs', $_) || isThisFs('smb', $_) ? 'smbs' :
-	    'special';
-	push @{$all_hds->{$s}}, $_;
-    }
-}
-
-sub get_major_minor {
-    eval {
-	my (undef, $major, $minor) = devices::entry($_->{device});
-	($_->{major}, $_->{minor}) = ($major, $minor);
-    } foreach @_;
-}
-
-sub merge_info_from_mtab {
-    my ($fstab) = @_;
-
-    my @l1 = map { my $l = $_; 
-		   my %l = (type => fs2type('swap')); 
-		   $l{$_} = $l->{$_} foreach qw(device major minor); 
-		   \%l;
-	       } read_fstab('', '/proc/swaps');
-    
-    my @l2 = map { read_fstab('', $_) } '/etc/mtab', '/proc/mounts';
-
-    foreach (@l1, @l2) {
-	if ($::isInstall && $_->{mntpoint} eq '/tmp/hdimage') {
-	    $_->{real_mntpoint} = delete $_->{mntpoint};
-	    $_->{mntpoint} = common::usingRamdisk() && "/mnt/hd"; #- remap for hd install.
-	}
-	$_->{isMounted} = $_->{isFormatted} = 1;
-	delete $_->{options};
-    } 
-    merge_fstabs($fstab, @l1, @l2);
-}
-
-sub merge_info_from_fstab {
-    my ($fstab, $prefix, $uniq) = @_;
-    my @l = grep { !($uniq && fsedit::mntpoint2part($_->{mntpoint}, $fstab)) } read_fstab($prefix, "/etc/fstab", 'all_options');
-    merge_fstabs($fstab, @l);
-}
-
-sub write_fstab {
-    my ($all_hds, $prefix) = @_;
-    $prefix ||= '';
-
-    my @l1 = (fsedit::get_really_all_fstab($all_hds), @{$all_hds->{special}});
-    my @l2 = read_fstab($prefix, "/etc/fstab", 'all_options');
-
-    my %new;
-    my @l = map { 
-	my $device = 
-	  $_->{device} eq 'none' || member($_->{type}, qw(nfs smbfs)) ? 
-	      $_->{device} : 
-	  isLoopback($_) ? 
-	      ($_->{mntpoint} eq '/' ? "/initrd/loopfs" : "$_->{loopback_device}{mntpoint}") . $_->{loopback_file} :
-	  do {
-	      my $dir = $_->{device} =~ m|^/| ? '' : '/dev/';
-	      eval { devices::make("$prefix$dir$_->{device}") };
-	      "$dir$_->{device}";
-	  };
-
-	my $real_mntpoint = $_->{mntpoint} || ${{ '/tmp/hdimage' => '/mnt/hd' }}{$_->{real_mntpoint}};
-	mkdir("$prefix/$real_mntpoint", 0755);
-	my $mntpoint = loopback::carryRootLoopback($_) ? '/initrd/loopfs' : $real_mntpoint;
-
-	my ($freq, $passno) =
-	  exists $_->{freq} ?
-	    ($_->{freq}, $_->{passno}) :
-	  isTrueFS($_) ? 
-	    (1, $_->{mntpoint} eq '/' ? 1 : loopback::carryRootLoopback($_) ? 0 : 2) : 
-	    (0, 0);
-
-	if (($device eq 'none' || !$new{$device}) && ($mntpoint eq 'swap' || !$new{$mntpoint})) {
-	    #- keep in mind the new line for fstab.
-	    $new{$device} = 1;
-	    $new{$mntpoint} = 1;
-
-	    my $options = $_->{options};
-	    my $type = type2fs($_);
-
-	    my $dev = $_->{device_alias} ? "/dev/$_->{device_alias}" : $device;
-
-	    # handle bloody supermount special case
-	    if ($options =~ /supermount/) {
-		my @l = grep { $_ ne 'supermount' } split(',', $options);
-		my @l1 = grep { member($_, 'ro', 'exec') } @l;
-		my @l2 = difference2(\@l, \@l1);
-		$options = join(",", "dev=$dev", "fs=$type", @l1, if_(@l2, '--', @l2));
-		($dev, $type) = ($mntpoint, 'supermount');
-	    }
-
-	    [ $dev, $mntpoint, $type, $options || 'defaults', $freq, $passno ];
-	} else {
-	    ()
-	}
-    } grep { $_->{device} && ($_->{mntpoint} || $_->{real_mntpoint}) && $_->{type} } (@l1, @l2);
-
-    log::l("writing $prefix/etc/fstab");
-    output("$prefix/etc/fstab", map { join(' ', @$_) . "\n" } sort { $a->[1] cmp $b->[1] } @l);
-}
-
-sub auto_fs() {
-    grep { chop; $_ && !/nodev/ } cat_("/etc/filesystems");
-}
-
-sub mount_options {
-    my %non_defaults = (
-			sync => 'async', noatime => 'atime', noauto => 'auto', ro => 'rw', 
-			user => 'nouser', nodev => 'dev', noexec => 'exec', nosuid => 'suid',
-		       );
-    my @user_implies = qw(noexec nodev nosuid);
-    \%non_defaults, \@user_implies;
-}
-
-# simple function
-# use mount_options_unpack + mount_options_pack for advanced stuff
-sub add_options(\$@) {
-    my ($option, @options) = @_;
-    my %l; @l{split(',', $$option), @options} = (); delete $l{defaults};
-    $$option = join(',', keys %l) || "defaults";
-}
-
-sub mount_options_unpack {
-    my ($part) = @_;
-    my $packed_options = $part->{options};
-
-    my ($non_defaults, $user_implies) = mount_options();
-
-    my @auto_fs = auto_fs();
-    my %per_fs = (
-		  iso9660 => [ qw(unhide) ],
-		  vfat => [ qw(umask=0) ],
-		  nfs => [ qw(rsize=8192 wsize=8192) ],
-		  smbfs => [ qw(username= password=) ],
-		  reiserfs => [ 'notail' ],
-		 );
-    while (my ($fs, $l) = each %per_fs) {
-	isThisFs($fs, $part) || $part->{type} eq 'auto' && member($fs, @auto_fs) or next;
-	$non_defaults->{$_} = 1 foreach @$l;
-    }
-
-    $non_defaults->{supermount} = 1 if member(type2fs($part), 'auto', @auto_fs);
-
-    my $defaults = { reverse %$non_defaults };
-    my %options = map { $_ => '' } keys %$non_defaults;
-    my @unknown;
-    foreach (split(",", $packed_options)) {
-	if ($_ eq 'user') {
-	    $options{$_} = 1 foreach ('user', @$user_implies);
-	} elsif (exists $non_defaults->{$_}) {
-	    $options{$_} = 1;
-	} elsif ($defaults->{$_}) {
-	    $options{$defaults->{$_}} = 0;
-	} elsif (/(.*?=)(.*)/) {
-	    $options{$1} = $2;
-	} else {
-	    push @unknown, $_;
-	}
-    }
-    # merge those, for cleaner help
-    $options{'rsize=8192,wsize=8192'} = delete $options{'rsize=8192'} && delete $options{'wsize=8192'}
-      if exists $options{'rsize=8192'};
-
-    my $unknown = join(",", @unknown);
-    \%options, $unknown;
-}
-
-sub mount_options_pack {
-    my ($part, $options, $unknown) = @_;
-
-    my ($non_defaults, $user_implies) = mount_options();
-    my @l;
-
-    if (delete $options->{user}) {
-	push @l, 'user';
-	foreach (@$user_implies) {
-	    if (!delete $options->{$_}) {
-		# overriding
-		$options->{$non_defaults->{$_}} = 1;
-	    }
-	}
-    }
-    push @l, map_each { if_($::b, $::a =~ /=$/ ? "$::a$::b" : $::a) } %$options;
-    push @l, $unknown;
-
-    $part->{options} = join(",", uniq(grep { $_ } @l));
-}
-
-sub mount_options_help {
-    my %help = map { $_ => '' } @_;
-    my %short = map { if_(/(.*?)=/, "$1=" => $_) } keys %help;
-
-    foreach (split(':', $ENV{LANGUAGE}), '') {
-	my $manpage = "/usr/share/man/$_/man8/mount.8.bz2";
-	-e $manpage or next;
-
-	my ($tp, $option);
-	foreach (`bzip2 -dc $manpage`) {
-	    my $prev_tp = $tp;
-	    $tp = /^\.(TP|RE)/;
-	    my ($s) = /^\.B (.*)/;
-	    if ($prev_tp && $s eq '\-o' .. /X^/) {
-		if (my $v = $prev_tp && $s =~ /^[a-z]/i .. $tp) {
-		    if ($v == 1) {
-			$s = $short{$s} || $s;
-			$option = exists $help{$s} && !$help{$s} ? $s : '';
-		    } elsif ($v !~ 'E0') {
-			s/\\//g;
-			s/\s*"(.*?)"\s*/$1/g if s/^\.BR\s+//;
-			s/^\.B\s+//;
-			$help{$option} .= $_ if $option;
-		    }
-		}        
-	    }
-	}
-    }
-    %help;
-}
-
-sub set_default_options {
-    my ($part, $is_removable, $useSupermount, $security, $iocharset, $codepage) = @_;
-
-    my ($options, $unknown) = mount_options_unpack($part);
-
-    if ($is_removable) {
-	$options->{supermount} = $useSupermount;
-	$part->{type} = 'auto';	# if supermount, code below will handle choosing the right type
-    }
-
-    my $is_auto = isThisFs('auto', $part);
-
-    if ($options->{supermount} && $is_auto) {
-	# this can't work, guessing :-(
-	$part->{type} = fs2type($part->{media_type} eq 'cdrom' ? 'iso9660' : 'vfat');
-	$is_auto = 0;
-    }
-
-    if ($part->{media_type} eq 'cdrom') {
-	$options->{ro} = 1;
-    }
-
-    if ($part->{media_type} eq 'fd') {
-	# slow device so don't loose time, write now!
-	$options->{sync} = 1;
-    }
-
-    if (isTrueFS($part)) {
-	#- noatime on laptops (do not wake up the hd)
-	#- Do  not  update  inode  access times on this
-	#- file system (e.g, for faster access  on  the
-	#- news spool to speed up news servers).
-	$options->{noatime} = detect_devices::isLaptop();
-    }
-    if (isNfs($part)) {
-	put_in_hash($options, { 
-			       nosuid => 1, 'rsize=8192,wsize=8192' => 1,
-			      });
-    }
-    if (isFat($part) || $is_auto) {
-
-	put_in_hash($options, {
-			       user => 1, noexec => 0,
-			      }) if !exists $part->{rootDevice}; # partition means no removable media
-
-	put_in_hash($options, {
-			       'umask=0' => $security < 3, 'iocharset=' => $iocharset, 'codepage=' => $codepage,
-			      });
-    }
-    if (isThisFs('ntfs', $part) || $is_auto) {
-	put_in_hash($options, { 'iocharset=' => $iocharset });
-    }
-    if (isThisFs('iso9660', $part) || $is_auto) {
-	put_in_hash($options, { user => 1, noexec => 0, 'iocharset=' => $iocharset });
-    }
-    if (isThisFs('reiserfs', $part)) {
-	$options->{notail} = 1;
-    }
-    if (isLoopback($part) && !isSwap($part)) { #- no need for loop option for swap files
-	$options->{loop} = 1;
-    }
-
-    # rationalize: no need for user
-    if ($options->{autofs} || $options->{supermount}) {
-	$options->{user} = 0;
-    }
-
-    # have noauto when we have user
-    $options->{noauto} = 1 if $options->{user}; 
-
-    if ($options->{user}) {
-	# ensure security  (user_implies - noexec as noexec is not a security matter)
-	$options->{$_} = 1 foreach 'nodev', 'nosuid';
-    }
-
-    mount_options_pack($part, $options, $unknown);
-}
-
-sub set_all_default_options {
-    my ($all_hds, $useSupermount, $security, $iocharset, $codepage) = @_;
-
-    my @removables = @{$all_hds->{raw_hds}};
-
-    foreach my $part (fsedit::get_really_all_fstab($all_hds)) {
-	set_default_options($part, member($part, @removables), $useSupermount, $security, $iocharset, $codepage);
-    }
-}
-
-sub set_removable_mntpoints {
-    my ($all_hds) = @_;
-
-    my %names;
-    foreach (@{$all_hds->{raw_hds}}) {
-	my $name = $_->{media_type};
-	if (member($name, 'hd', 'fd')) {
-	    if (detect_devices::isZipDrive($_)) {
-		$name = 'zip';
-	    } elsif ($name eq 'fd') {
-		$name = 'floppy';
-	    } else {
-		log::l("set_removable_mntpoints: don't know what to with hd $_->{device}");
-		next;
-	    }
-	}
-	if ($name) {
-	    my $s = ++$names{$name};
-	    $_->{mntpoint} ||= "/mnt/$name" . ($s == 1 ? '' : $s);
-	}
-    }
-}
-
-sub get_raw_hds {
-    my ($prefix, $all_hds) = @_;
-
-    $all_hds->{raw_hds} = 
-      [ 
-       detect_devices::floppies(), detect_devices::cdroms(), 
-       (map { $_->{device} .= '4'; $_ } detect_devices::zips())
-      ];
-    get_major_minor(@{$all_hds->{raw_hds}});
-
-    my @fstab = read_fstab($prefix, "/etc/fstab", 'all_options');
-    $all_hds->{nfss} = [ grep { isNfs($_) } @fstab ];
-    $all_hds->{smbs} = [ grep { isThisFs('smbfs', $_) } @fstab ];
-    $all_hds->{special} = [
-       { device => 'none', mntpoint => '/proc', type => 'proc' },
-       { device => 'none', mntpoint => '/dev/pts', type => 'devpts', options => 'mode=0620' },
-    ];
-}
-
-################################################################################
-# formatting functions
-################################################################################
-sub disable_forced_fsck {
-    my ($dev) = @_;
-    run_program::run("tune2fs", "-c0", "-i0", devices::make($dev));
-}
-
-sub format_ext2($@) {
-    #- mke2fs -b (1024|2048|4096) -c -i(1024 > 262144) -N (1 > 100000000) -m (0-100%) -L volume-label
-    #- tune2fs
-    my ($dev, @options) = @_;
-    $dev =~ m,(rd|ida|cciss)/, and push @options, qw(-b 4096 -R stride=16); #- For RAID only.
-    push @options, qw(-b 1024 -O none) if arch() =~ /alpha/;
-    run_program::run("mke2fs", @options, devices::make($dev)) or die _("%s formatting of %s failed", "ext2", $dev);
-}
-sub format_ext3 {
-    my ($dev, @options) = @_;
-    format_ext2($dev, "-j", @options);
-    disable_forced_fsck($dev);
-}
-sub format_reiserfs {
-    my ($dev, @options) = @_;
-    #TODO add -h tea
-    run_program::run("mkreiserfs", "-f", "-q", @options, devices::make($dev)) or die _("%s formatting of %s failed", "reiserfs", $dev);
-}
-sub format_xfs {
-    my ($dev, @options) = @_;
-    run_program::run("mkfs.xfs", "-f", "-q", @options, devices::make($dev)) or die _("%s formatting of %s failed", "xfs", $dev);
-}
-sub format_jfs {
-    my ($dev, @options) = @_;
-    run_program::run("mkfs.jfs", "-f", @options, devices::make($dev)) or die _("%s formatting of %s failed", "jfs", $dev);
-}
-sub format_dos {
-    my ($dev, @options) = @_;
-    run_program::run("mkdosfs", @options, devices::make($dev)) or die _("%s formatting of %s failed", "dos", $dev);
-}
-sub format_hfs {
-    my ($dev, @options) = @_;
-    run_program::run("hformat", @options, devices::make($dev)) or die _("%s formatting of %s failed", "HFS", $dev);
-}
-sub real_format_part {
-    my ($part) = @_;
-
-    $part->{isFormatted} and return;
-
-    my @options = $part->{toFormatCheck} ? "-c" : ();
-    log::l("formatting device $part->{device} (type ", type2name($part->{type}), ")");
-
-    if (isExt2($part)) {
-	push @options, "-F" if isLoopback($part);
-	format_ext2($part->{device}, @options);
-    } elsif (isThisFs("ext3", $part)) {
-        format_ext3($part->{device}, @options);
-    } elsif (isThisFs("reiserfs", $part)) {
-        format_reiserfs($part->{device}, @options, if_(c::kernel_version() =~ /^\Q2.2/, "-v", "1"));
-    } elsif (isThisFs("xfs", $part)) {
-        format_xfs($part->{device}, @options);
-    } elsif (isThisFs("jfs", $part)) {
-        format_jfs($part->{device}, @options);
-    } elsif (isDos($part)) {
-        format_dos($part->{device}, @options);
-    } elsif (isWin($part)) {
-        format_dos($part->{device}, @options, '-F', 32);
-    } elsif (isThisFs('hfs', $part)) {
-        format_hfs($part->{device}, @options, '-l', "Untitled");
-    } elsif (isAppleBootstrap($part)) {
-        format_hfs($part->{device}, @options, '-l', "bootstrap");
-    } elsif (isSwap($part)) {
-	my $check_blocks = grep { /^-c$/ } @options;
-        swap::make($part->{device}, $check_blocks);
-    } else {
-	die _("I don't know how to format %s in type %s", $_->{device}, type2name($_->{type}));
-    }
-    $part->{isFormatted} = 1;
-}
-sub format_part {
-    my ($raids, $part, $prefix) = @_;
-    if (isRAID($part)) {
-	require raid;
-	raid::format_part($raids, $part);
-    } elsif (isLoopback($part)) {
-	loopback::format_part($part, $prefix);
-    } else {
-	real_format_part($part);
-    }
-}
-
-################################################################################
-# mounting functions
-################################################################################
-sub formatMount_part {
-    my ($part, $raids, $fstab, $prefix, $callback) = @_;
-
-    if (isLoopback($part)) {
-	formatMount_part($part->{loopback_device}, $raids, $fstab, $prefix, $callback);
-    }
-    if (my $p = up_mount_point($part->{mntpoint}, $fstab)) {
-	formatMount_part($p, $raids, $fstab, $prefix, $callback) unless loopback::carryRootLoopback($part);
-    }
-
-    if ($part->{toFormat}) {
-	$callback->($part) if $callback;
-	format_part($raids, $part, $prefix);
-    }
-    mount_part($part, $prefix);
-}
-
-sub formatMount_all {
-    my ($raids, $fstab, $prefix, $callback) = @_;
-    formatMount_part($_, $raids, $fstab, $prefix, $callback) 
-      foreach sort { isLoopback($a) ? 1 : isSwap($a) ? -1 : 0 } grep { $_->{mntpoint} } @$fstab;
-
-    #- ensure the link is there
-    loopback::carryRootCreateSymlink($_, $prefix) foreach @$fstab;
-
-    #- for fun :)
-    #- that way, when install exits via ctrl-c, it gives hand to partition
-    eval {
-	local $SIG{__DIE__} = 'ignore';
-	my ($type, $major, $minor) = devices::entry(fsedit::get_root($fstab)->{device});
-	output "/proc/sys/kernel/real-root-dev", makedev($major, $minor);
-    };
-}
-
-sub mount {
-    my ($dev, $where, $fs, $rdonly) = @_;
-    log::l("mounting $dev on $where as type $fs");
-
-    -d $where or mkdir_p($where);
-
-    my @fs_modules = qw(vfat hfs romfs ufs reiserfs xfs jfs ext3);
-
-    if (member($fs, 'smb', 'nfs') && $::isStandalone) {
-	system('mount', $dev, $where) == 0 or die _("mount failed");
-	return; #- do not update mtab, already done by mount(8)
-    } elsif (member($fs, 'ext2', 'proc', 'usbdevfs', 'iso9660', @fs_modules)) {
-	$dev = devices::make($dev) if $fs ne 'proc' && $fs ne 'usbdevfs';
-	$where =~ s|/$||;
-
-	my $flag = c::MS_MGC_VAL();
-	$flag |= c::MS_RDONLY() if $rdonly;
-	my $mount_opt = "";
-
-	if ($fs eq 'vfat') {
-	    $mount_opt = 'check=relaxed';
-	} elsif ($fs eq 'reiserfs') {
-	    #- could be better if we knew if there is a /boot or not
-	    #- without knowing it, / is forced to be mounted with notail
-	    # if $where =~ m|/(boot)?$|;
-	    $mount_opt = 'notail'; #- notail in any case
-	} elsif ($fs eq 'ext2') {
-	    run_program::run("fsck.ext2", "-a", $dev);
-	    $? & 0x0100 and log::l("fsck corrected partition $dev");
-	    $? & 0xfeff and die _("fsck failed with exit code %d or signal %d", $? >> 8, $? & 255);
-	}
-	if (member($fs, @fs_modules)) {
-	    eval { modules::load($fs) };
-	} elsif ($fs eq 'iso9660') {
-	    eval { modules::load('isofs') };
-	}
-	if ($fs eq 'ext3' && $::isInstall) {
-	    # ext3 mount to use the journal
-	    syscall_('mount', $dev, $where, $fs, $flag, $mount_opt) or die _("mount failed: ") . "$!";
-	    syscall_('umount', $where);
-	    # really mount as ext2 during install for speed up
-	    $fs = 'ext2';
-	}
-	log::l("calling mount($dev, $where, $fs, $flag, $mount_opt)");
-	syscall_('mount', $dev, $where, $fs, $flag, $mount_opt) or die _("mount failed: ") . "$!";
-    } else {
-	log::l("skipping mounting $fs partition");
-	return;
-    }
-    local *F;
-    open F, ">>/etc/mtab" or return; #- fail silently, /etc must be read-only
-    print F "$dev $where $fs defaults 0 0\n";
-}
-
-#- takes the mount point to umount (can also be the device)
-sub umount {
-    my ($mntpoint) = @_;
-    $mntpoint =~ s|/$||;
-    log::l("calling umount($mntpoint)");
-    syscall_('umount', $mntpoint) or die _("error unmounting %s: %s", $mntpoint, "$!");
-
-    substInFile { $_ = '' if /(^|\s)$mntpoint\s/ } '/etc/mtab'; #- don't care about error, if we can't read, we won't manage to write... (and mess mtab)
-}
-
-sub mount_part {
-    my ($part, $prefix, $rdonly) = @_;
-
-    #- root carrier's link can't be mounted
-    loopback::carryRootCreateSymlink($part, $prefix);
-
-    if ($part->{isMounted} && $part->{real_mntpoint} && $part->{mntpoint}) {
-	log::l("remounting partition on $prefix$part->{mntpoint} instead of $part->{real_mntpoint}");
-	if ($::isInstall) { #- ensure partition will not be busy.
-	    require install_any;
-	    install_any::getFile('XXX');
-	}
-	eval {
-	    umount($part->{real_mntpoint});
-	    rmdir $part->{real_mntpoint};
-	    symlinkf "$prefix$part->{mntpoint}", $part->{real_mntpoint};
-	    delete $part->{real_mntpoint};
-	    $part->{isMounted} = 0;
-	};
-    }
-
-    return if $part->{isMounted};
-
-    unless ($::testing) {
-	if (isSwap($part)) {
-	    swap::swapon($part->{device});
-	} else {
-	    $part->{mntpoint} or die "missing mount point for partition $part->{device}";
-
-	    my $dev = $part->{device};
-	    my $mntpoint = ($prefix || '') . $part->{mntpoint};
-	    if (isLoopback($part)) {
-		eval { modules::load('loop') };
-		$dev = $part->{real_device} = devices::set_loop($part->{device}) || die;
-	    } elsif (loopback::carryRootLoopback($part)) {
-		$mntpoint = "/initrd/loopfs";
-	    }
-	    mount($dev, $mntpoint, type2fs($part), $rdonly);
-	    rmdir "$mntpoint/lost+found";
-	}
-    }
-    $part->{isMounted} = $part->{isFormatted} = 1; #- assume that if mount works, partition is formatted
-}
-
-sub umount_part {
-    my ($part, $prefix) = @_;
-
-    $part->{isMounted} || $part->{real_mntpoint} or return;
-
-    unless ($::testing) {
-	if (isSwap($part)) {
-	    swap::swapoff($part->{device});
-	} elsif (loopback::carryRootLoopback($part)) {
-	    umount("/initrd/loopfs");
-	} else {
-	    umount(($prefix || '') . $part->{mntpoint} || devices::make($part->{device}));
-	    c::del_loop(delete $part->{real_device}) if isLoopback($part);
-	}
-    }
-    $part->{isMounted} = 0;
-}
-
-sub mount_all($;$$) {
-    my ($fstab, $prefix) = @_;
-
-    #- TODO fsck, create check_mount_all ?
-    log::l("mounting all filesystems");
-
-    #- order mount by alphabetical ordre, that way / < /home < /home/httpd...
-    foreach (sort { $a->{mntpoint} cmp $b->{mntpoint} } grep { isSwap($_) || $_->{mntpoint} && isTrueFS($_) } @$fstab) {
-	mount_part($_, $prefix);
-    }
-}
-
-sub umount_all($;$) {
-    my ($fstab, $prefix) = @_;
-
-    log::l("unmounting all filesystems");
-
-    foreach (sort { $b->{mntpoint} cmp $a->{mntpoint} } @$fstab) {
-	$_->{mntpoint} and umount_part($_, $prefix);
-    }
-}
-
-################################################################################
-# various functions
-################################################################################
-sub df {
-    my ($part, $prefix) = @_;
-    my $dir = "/tmp/tmp_fs_df";
-
-    return $part->{free} if exists $part->{free};
-
-    if ($part->{isMounted}) {
-	$dir = ($prefix || '') . $part->{mntpoint};
-    } elsif ($part->{notFormatted} && !$part->{isFormatted}) {
-	return; #- won't even try!
-    } else {
-	mkdir $dir;
-	eval { mount($part->{device}, $dir, type2fs($part), 'readonly') };
-	if ($@) {
-	    $part->{notFormatted} = 1;
-	    $part->{isFormatted} = 0;
-	    unlink $dir;
-	    return;
-	}
-    }
-    my (undef, $free) = MDK::Common::System::df($dir);
-
-    if (!$part->{isMounted}) {
-	umount($dir);
-	unlink($dir)
-    }
-
-    $part->{free} = 2 * $free if defined $free;
-    $part->{free};
-}
-
-sub up_mount_point {
-    my ($mntpoint, $fstab) = @_;
-    while (1) {
-	$mntpoint = dirname($mntpoint);
-	$mntpoint ne "." or return;
-	$_->{mntpoint} eq $mntpoint and return $_ foreach @$fstab;
-    }
-}
-
-1;
diff --git a/perl-install/fsedit.pm b/perl-install/fsedit.pm
deleted file mode 100644
index 1061fb7a0..000000000
--- a/perl-install/fsedit.pm
+++ /dev/null
@@ -1,715 +0,0 @@
-package fsedit; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(%suggestions);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table qw(:types);
-use partition_table_raw;
-use detect_devices;
-use fsedit;
-use devices;
-use loopback;
-use log;
-use fs;
-
-%suggestions = (
-  __("simple") => [
-    { mntpoint => "/",     size => 300 << 11, type => 0x83, ratio => 5, maxsize =>3500 << 11 },
-    { mntpoint => "swap",  size =>  64 << 11, type => 0x82, ratio => 1, maxsize => 250 << 11 },
-    { mntpoint => "/home", size => 300 << 11, type => 0x83, ratio => 3 },
-  ], 'with usr' => [
-    { mntpoint => "/",     size => 150 << 11, type => 0x83, ratio => 1, maxsize => 500 << 11 },
-    { mntpoint => "swap",  size =>  64 << 11, type => 0x82, ratio => 1, maxsize => 250 << 11 },
-    { mntpoint => "/usr",  size => 300 << 11, type => 0x83, ratio => 4, maxsize =>3000 << 11 },
-    { mntpoint => "/home", size => 100 << 11, type => 0x83, ratio => 5 },
-  ], __("server") => [
-    { mntpoint => "/",     size => 150 << 11, type => 0x83, ratio => 1, maxsize => 250 << 11 },
-    { mntpoint => "swap",  size =>  64 << 11, type => 0x82, ratio => 2, maxsize => 400 << 11 },
-    { mntpoint => "/usr",  size => 300 << 11, type => 0x83, ratio => 3, maxsize =>3000 << 11 },
-    { mntpoint => "/var",  size => 100 << 11, type => 0x83, ratio => 4 },
-    { mntpoint => "/home", size => 100 << 11, type => 0x83, ratio => 5 },
-  ],
-);
-foreach (values %suggestions) {
-    if (arch() =~ /ia64/) {
-	@$_ = ({ mntpoint => "/boot/efi", size => 50 << 11, type => 0xb, ratio => 1, maxsize => 150 << 11 }, @$_);
-    }
-}
-
-my @suggestions_mntpoints = (
-    "/var/ftp", "/var/www", "/boot",
-    arch() =~ /sparc/ ? "/mnt/sunos" : arch() =~ /ppc/ ? "/mnt/macos" : "/mnt/windows",
-);
-
-my @partitions_signatures = (
-    [ 0x8e, 0, "HM\1\0" ],
-    [ 0x83, 0x438, "\x53\xEF" ],
-    [ 0x183, 0x10034, "ReIsErFs" ],
-    [ 0x183, 0x10034, "ReIsEr2Fs" ],
-    [ 0x283, 0, 'XFSB', 0x200, 'XAGF', 0x400, 'XAGI' ],
-    [ 0x383, 0x8000, 'JFS1' ],
-    [ 0x82, 4086, "SWAP-SPACE" ],
-    [ 0x82, 4086, "SWAPSPACE2" ],
-    [ 0x7,  0x1FE, "\x55\xAA", 0x3, "NTFS" ],
-    [ 0xc,  0x1FE, "\x55\xAA", 0x52, "FAT32" ],
-arch() !~ /^sparc/ ? (
-    [ 0x6,  0x1FE, "\x55\xAA", 0x36, "FAT" ],
-) : (),
-);
-
-sub typeOfPart { 
-    my $dev = devices::make($_[0]);
-    my $t = typeFromMagic($dev, @partitions_signatures);
-    if ($t == 0x83) {
-	#- there is no magic to differentiate ext3 and ext2. Using libext2fs
-	#- to check if it has a journal
-	$t = 0x483 if c::is_ext3($dev);
-    }
-    $t;
-}
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub empty_all_hds {
-    { hds => [], lvms => [], raids => [], loopbacks => [], raw_hds => [], nfss => [], smbs => [], special => [] };
-}
-sub recompute_loopbacks {
-    my ($all_hds) = @_;
-    my @fstab = get_all_fstab($all_hds);
-    @{$all_hds->{loopbacks}} = map { isPartOfLoopback($_) ? @{$_->{loopback}} : () } @fstab;
-}
-
-sub raids {
-    my ($hds) = @_;
-
-    my @parts = get_fstab(@$hds);
-    (grep { isRawRAID($_) } @parts) && detect_devices::raidAutoStart() or return [];
-
-    fs::get_major_minor(@parts);
-    my %devname2part = map { $_->{dev} => { %$_, device => $_->{dev} } } read_partitions();
-
-    my @raids;
-    my @mdstat = cat_("/proc/mdstat");
-    for (my $i = 0; $i < @mdstat; $i++) {
-
-	my ($nb, $level, $mdparts) = 
-	  #- line format is:
-	  #- md%d : {in}?active{ (read-only)}? {linear|raid1|raid4|raid5}{ DEVNAME[%d]{(F)}?}*
-	  $mdstat[$i] =~ /^md(.).* ([^ \[\]]+) (\S+\[\d+\].*)/ or next;
-
-	$level =~ s/raid//; #- { linear | raid0 | raid1 | raid5 } -> { linear | 0 | 1 | 5 }
-
-	my $chunks = $mdstat[$i+1] =~ /(\S+) chunks/ ? $1 : "64k";
-
-	my @raw_mdparts = map { /([^\[]+)/ } split ' ', $mdparts;
-	my @mdparts = 
-	  map { 
-	      my $mdpart = $devname2part{$_} || { device => $_ };
-	      if (my ($part) = grep { is_same_hd($mdpart, $_) } @parts) {
-		  $part->{raid} = $nb;
-		  delete $part->{mntpoint};
-		  $part;
-	      } else {
-		  #- forget it when not found? that way it won't break much... beurk.
-		  ();
-	      }
-	  } @raw_mdparts;
-
-	my $type = typeOfPart("md$nb");
-	log::l("RAID: found md$nb (raid $level) chunks $chunks ", if_($type, "type $type "), "with parts ", join(", ", @raw_mdparts));
-	$raids[$nb] = { 'chunk-size' => $chunks, type => $type || 0x83, disks => \@mdparts,
-			device => "md$nb", notFormatted => !$type, level => $level };
-    }
-    require raid;
-    raid::update(@raids);
-    \@raids;
-}
-
-sub hds {
-    my ($drives, $flags) = @_;
-    my (@hds);
-    my $rc;
-
-    foreach (@$drives) {
-	my $file = devices::make($_->{device});
-
-	my $hd = partition_table_raw::get_geometry($file) or log::l("An error occurred while getting the geometry of block device $file: $!"), next;
-	add2hash_($hd, $_);
-	$hd->{file} = $file;
-	$hd->{prefix} = $hd->{device};
-	# for RAID arrays of format c0d0p1
-	$hd->{prefix} .= "p" if $hd->{prefix} =~ m,(rd|ida|cciss|ataraid)/,;
-
-	eval { partition_table::read($hd, $flags->{clearall} || member($_->{device}, @{$flags->{clear} || []})) };
-	if ($@) {
-	    partition_table_raw::zero_MBR($hd);
-	}
-	member($_->{device}, @{$flags->{clear} || []}) and partition_table::remove($hd, $_)
-	  foreach partition_table::get_normal_parts($hd);
-
-	# special case for Various type
-	$_->{type} = typeOfPart($_->{device}) || 0x100 foreach grep { $_->{type} == 0x100 } partition_table::get_normal_parts($hd);
-
-	#- special case for type overloading (eg: reiserfs is 0x183)
-	foreach (grep { isExt2($_) } partition_table::get_normal_parts($hd)) {
-	    my $type = typeOfPart($_->{device});
-	    $_->{type} = $type if $type > 0x100 || $type && $hd->isa('partition_table_gpt');
-	}
-	push @hds, $hd;
-    }
-    #- detect raids before LVM allowing LVM on raid
-    my $raids = raids(\@hds);
-    my $all_hds = { %{ empty_all_hds() }, hds => \@hds, lvms => [], raids => $raids };
-
-    my @lvms;
-    if (my @pvs = grep { isRawLVM($_) } get_all_fstab($all_hds)) {
-	#- otherwise vgscan won't find them
-	devices::make($_->{device}) foreach @pvs; 
-	require lvm;
-	foreach (@pvs) {
-	    my $name = lvm::get_vg($_) or next;
-	    my ($lvm) = grep { $_->{LVMname} eq $name } @lvms;
-	    if (!$lvm) {
-		$lvm = bless { disks => [], LVMname => $name }, 'lvm';
-		lvm::update_size($lvm);
-		lvm::get_lvs($lvm);
-		push @lvms, $lvm;
-	    }
-	    $_->{lvm} = $name;
-	    push @{$lvm->{disks}}, $_;
-	}
-    }
-    $all_hds->{lvms} = \@lvms;
-
-    fs::get_major_minor(get_all_fstab($all_hds));
-
-    $all_hds;
-}
-
-
-sub read_partitions() {
-    my (undef, undef, @all) = cat_("/proc/partitions");
-    grep {
-	$_->{size} != 1 &&	 # skip main extended partition
-	$_->{size} != 0x3fffffff # skip cdroms (otherwise stops cd-audios)
-    } map { 
-	my %l; 
-	@l{qw(major minor size dev)} = split; 
-	\%l;
-    } @all;
-}
-
-sub readProcPartitions {
-    my ($hds) = @_;
-
-    my @all = read_partitions();
-    my @parts = grep { $_->{dev} =~ /\d$/ } @all;
-    my @disks = grep { $_->{dev} !~ /\d$/ } @all;
-
-    my $devfs_like = grep { $_->{dev} =~ m|/disc$| } @disks;
-
-    my %devfs2normal = map {
-	my (undef, $major, $minor) = devices::entry($_->{device});
-	my ($disk) = grep { $_->{major} == $major && $_->{minor} == $minor } @disks;
-	$disk->{dev} => $_->{device};
-    } @$hds;
-
-    foreach my $part (@parts) {
-	my $dev;
-	if ($devfs_like) {
-	    $dev = -e "/dev/$part->{dev}" ? $part->{dev} : sprintf("0x%x%02x", $part->{major}, $part->{minor});
-	    $part->{rootDevice} = $devfs2normal{dirname($part->{dev}) . '/disc'};
-	} else {
-	    $dev = $part->{dev};
-	    foreach my $hd (@$hds) {
-		$part->{rootDevice} = $hd->{device} if $part->{dev} =~ /^$hd->{device}./;
-	    }
-	}
-	$part->{device} = $dev;
-	$part->{start} = 0;	# unknown, but we don't care
-	$part->{size} *= 2;	# from KB to sectors
-	$part->{type} = typeOfPart($dev); 
-
-	delete $part->{dev}; # cleanup
-    }
-    @parts;
-}
-
-sub all_hds {
-    my ($all_hds) = @_;
-    (@{$all_hds->{hds}}, @{$all_hds->{lvms}});
-}
-sub part2hd {
-    my ($part, $all_hds) = @_;
-    my ($hd) = grep { $part->{rootDevice} eq $_->{device} } all_hds($all_hds);
-    $hd;
-}
-
-sub is_same_hd {
-    my ($hd1, $hd2) = @_;
-    if ($hd1->{major} && $hd2->{major}) {
-	$hd1->{major} == $hd2->{major} && $hd1->{minor} == $hd2->{minor};
-    } else {
-	$hd1->{device} eq $hd2->{device};
-    }
-}
-
-sub is_same_part {
-    my ($part1, $part2) = @_;
-    foreach ('start', 'size', 'type', 'rootDevice') {
-	$part1->{$_} eq $part2->{$_} or return;
-    }
-    1;
-}
-
-#- get all normal partition including special ones as found on sparc.
-sub get_fstab {
-    map { partition_table::get_normal_parts($_) } @_;
-}
-
-#- get normal partition that should be visible for working on.
-sub get_visible_fstab {
-    grep { $_ && !partition_table::isWholedisk($_) && !partition_table::isHiddenMacPart($_) }
-      map { partition_table::get_normal_parts($_) } @_;
-}
-
-sub get_fstab_and_holes {
-    map {
-	if (isLVM($_)) {
-	    my @parts = partition_table::get_normal_parts($_);
-	    my $free = $_->{totalsectors} - sum map { $_->{size} } @parts;
-	    my $free_part = { start => 0, size => $free, type => 0, rootDevice => $_->{device} };
-	    @parts, if_($free >= $_->cylinder_size, $free_part);
-	} else {
-	    partition_table::get_normal_parts_and_holes($_);
-	}
-    } @_;
-}
-sub get_holes {
-    grep { $_->{type} == 0 } get_fstab_and_holes(@_);
-}
-
-sub get_all_fstab {
-    my ($all_hds) = @_;
-    my @parts = map { partition_table::get_normal_parts($_) } all_hds($all_hds);
-    my @raids = grep {$_} @{$all_hds->{raids}};
-    @parts, @raids, @{$all_hds->{loopbacks}};
-}
-sub get_really_all_fstab {
-    my ($all_hds) = @_;
-    my @parts = map { partition_table::get_normal_parts($_) } all_hds($all_hds);
-    my @raids = grep {$_} @{$all_hds->{raids}};
-    @parts, @raids, @{$all_hds->{loopbacks}}, @{$all_hds->{raw_hds}}, @{$all_hds->{nfss}}, @{$all_hds->{smbs}};
-}
-sub get_all_fstab_and_holes {
-    my ($all_hds) = @_;
-    my @raids = grep {$_} @{$all_hds->{raids}};
-    get_fstab_and_holes(all_hds($all_hds)), @raids, @{$all_hds->{loopbacks}};
-}
-sub get_all_holes {
-    my ($all_hds) = @_;
-    grep { $_->{type} == 0 } get_all_fstab_and_holes($all_hds);
-}
-
-sub all_free_space {
-    my ($all_hds) = @_;
-    sum map { $_->{size} } get_all_holes($all_hds);
-}
-sub free_space {
-    sum map { $_->{size} } get_holes(@_);
-}
-
-sub is_one_big_fat {
-    my ($hds) = @_;
-    @$hds == 1 or return;
-
-    my @l = get_fstab(@$hds);
-    @l == 1 && isFat($l[0]) && free_space(@$hds) < 10 << 11;
-}
-
-sub file2part {
-    my ($prefix, $fstab, $file, $keep_simple_symlinks) = @_;    
-    my $part;
-
-    $file = $keep_simple_symlinks ? common::expand_symlinks_but_simple("$prefix$file") : expand_symlinks("$prefix$file");
-    unless ($file =~ s/^$prefix//) {
-	my ($part) = grep { loopback::carryRootLoopback($_) } @$fstab or die;
-	log::l("found $part->{mntpoint}");
-	$file =~ s|/initrd/loopfs|$part->{mntpoint}|;
-    }
-    foreach (@$fstab) {
-	my $m = $_->{mntpoint};
-	$part = $_ if 
-	  $file =~ /^\Q$m/ && 
-	    (!$part || length $part->{mntpoint} < length $m);
-    }
-    $part or die "file2part: not found $file";
-    $file =~ s|$part->{mntpoint}/?|/|;
-    ($part, $file);
-}
-
-
-sub computeSize {
-    my ($part, $best, $all_hds, $suggestions) = @_;
-    my $max = $part->{maxsize} || $part->{size};
-    return min($max, $best->{size}) unless $best->{ratio};
-
-    my $free_space = all_free_space($all_hds);
-    my @l = my @L = grep { 
-	if (!has_mntpoint($_->{mntpoint}, $all_hds) && $free_space >= $_->{size}) {
-	    $free_space -= $_->{size};
-	    1;
-	} else { 0 } } @$suggestions;
-
-    my $tot_ratios = 0;
-    while (1) {
-	my $old_free_space = $free_space;
-	my $old_tot_ratios = $tot_ratios;
-
-	$tot_ratios = sum(map { $_->{ratio} } @l);
-	last if $tot_ratios == $old_tot_ratios;
-
-	@l = grep { 
-	    if ($_->{ratio} && $_->{maxsize} && $tot_ratios &&
-		$_->{size} + $_->{ratio} / $tot_ratios * $old_free_space >= $_->{maxsize}) {
-		return min($max, $best->{maxsize}) if $best->{mntpoint} eq $_->{mntpoint};
-		$free_space -= $_->{maxsize} - $_->{size};
-		0;
-	    } else {
-		$_->{ratio};
-	    } 
-	} @l;
-    }
-    my $size = int min($max, $best->{size} + $free_space * ($tot_ratios && $best->{ratio} / $tot_ratios));
-    #- verify other entry can fill the hole
-    if (grep { $_->{size} < $max - $size } @L) { $size } else { $max }
-}
-
-sub suggest_part {
-    my ($part, $all_hds, $suggestions) = @_;
-    $suggestions ||= $suggestions{server};
-
-    my $has_swap = grep { isSwap($_) } get_all_fstab($all_hds);
-
-    my ($best, $second) =
-      grep { !$_->{maxsize} || $part->{size} <= $_->{maxsize} }
-      grep { $_->{size} <= ($part->{maxsize} || $part->{size}) }
-      grep { !has_mntpoint($_->{mntpoint}, $all_hds) || isSwap($_) && !$has_swap }
-      grep { !$_->{hd} || $_->{hd} eq $part->{rootDevice} }
-      grep { !$part->{type} || $part->{type} == $_->{type} || isTrueFS($part) && isTrueFS($_) }
-	@$suggestions or return;
-
-#-    if (arch() =~ /i.86/) {
-#-	  $best = $second if
-#-	    $best->{mntpoint} eq '/boot' &&
-#-	    $part->{start} + $best->{size} > 1024 * $hd->cylinder_size(); #- if the empty slot is beyond the 1024th cylinder, no use having /boot
-#-    }
-
-    defined $best or return; #- sorry no suggestion :(
-
-    $part->{mntpoint} = $best->{mntpoint};
-    $part->{type} = $best->{type} if !(isTrueFS($best) && isTrueFS($part));
-    $part->{size} = computeSize($part, $best, $all_hds, $suggestions);
-    1;
-}
-
-sub suggestions_mntpoint {
-    my ($all_hds) = @_;
-    sort grep { !/swap/ && !has_mntpoint($_, $all_hds) }
-      (@suggestions_mntpoints, map { $_->{mntpoint} } @{$suggestions{server}});
-}
-
-#-sub partitionDrives {
-#-
-#-    my $cmd = "/sbin/fdisk";
-#-    -x $cmd or $cmd = "/usr/bin/fdisk";
-#-
-#-    my $drives = findDrivesPresent() or die "You don't have any hard drives available! You probably forgot to configure a SCSI controller.";
-#-
-#-    foreach (@$drives) {
-#-	 my $text = "/dev/" . $_->{device};
-#-	 $text .= " - SCSI ID " . $_->{id} if $_->{device} =~ /^sd/;
-#-	 $text .= " - Model " . $_->{info};
-#-	 $text .= " array" if $_->{device} =~ /^c.d/;
-#-
-#-	 #- truncate at 50 columns for now
-#-	 $text = substr $text, 0, 50;
-#-    }
-#-    #-TODO TODO
-#-}
-
-
-sub mntpoint2part {
-    my ($mntpoint, $fstab) = @_;
-    first(grep { $mntpoint eq $_->{mntpoint} } @$fstab);
-}
-sub has_mntpoint {
-    my ($mntpoint, $all_hds) = @_;
-    mntpoint2part($mntpoint, [ get_really_all_fstab($all_hds) ]);
-}
-sub get_root_ {
-    my ($fstab, $boot) = @_;
-    $boot && mntpoint2part("/boot", $fstab) || mntpoint2part("/", $fstab);
-}
-sub get_root { &get_root_ || {} }
-
-#- do this before modifying $part->{type}
-sub check_type {
-    my ($type, $hd, $part) = @_;
-    isThisFs("jfs", { type => name2type($type) }) && $part->{size} < 16 << 11 and die _("You can't use JFS for partitions smaller than 16MB");    
-    isThisFs("reiserfs", { type => name2type($type) }) && $part->{size} < 32 << 11 and die _("You can't use ReiserFS for partitions smaller than 32MB");
-}
-
-#- do this before modifying $part->{mntpoint}
-#- $part->{mntpoint} should not be used here, use $mntpoint instead
-sub check_mntpoint {
-    my ($mntpoint, $hd, $part, $all_hds) = @_;
-
-    $mntpoint eq '' || isSwap($part) || isNonMountable($part) and return;
-    $mntpoint =~ m|^/| or die _("Mount points must begin with a leading /");
-    has_mntpoint($mntpoint, $all_hds) and die _("There is already a partition with mount point %s\n", $mntpoint);
-
-    die "raid / with no /boot" 
-      if $mntpoint eq "/" && isRAID($part) && !has_mntpoint("/boot", $all_hds);
-    die _("You can't use a LVM Logical Volume for mount point %s", $mntpoint)
-      if ($mntpoint eq '/' || $mntpoint eq '/boot') && isLVM($hd);
-    die _("This directory should remain within the root filesystem")
-      if member($mntpoint, qw(/bin /dev /etc /lib /sbin));
-    die _("You need a true filesystem (ext2, reiserfs) for this mount point\n")
-      if !isTrueFS($part) && member($mntpoint, qw(/ /home /tmp /usr /var));
-
-    local $part->{mntpoint} = $mntpoint;
-    loopback::check_circular_mounts($hd, $part, $all_hds);
-}
-
-sub check {
-    my ($hd, $part, $all_hds) = @_;
-    check_mntpoint($part->{mntpoint}, $hd, $part, $all_hds);
-    check_type($part->{type}, $hd, $part);
-}
-
-sub add {
-    my ($hd, $part, $all_hds, $options) = @_;
-
-    isSwap($part) ?
-      ($part->{mntpoint} = 'swap') :
-      $options->{force} || check_mntpoint($part->{mntpoint}, $hd, $part, $all_hds);
-
-    delete $part->{maxsize};
-
-    if (isLVM($hd)) {
-	lvm::lv_create($hd, $part);
-    } else {
-	partition_table::add($hd, $part, $options->{primaryOrExtended});
-    }
-}
-
-sub allocatePartitions {
-    my ($all_hds, $to_add) = @_;
-
-    foreach my $part (get_all_holes($all_hds)) {
-	my ($start, $size, $dev) = @$part{"start", "size", "rootDevice"};
-	my $part;
-	while (suggest_part($part = { start => $start, size => 0, maxsize => $size, rootDevice => $dev }, 
-			    $all_hds, $to_add)) {
-	    my ($hd) = fsedit::part2hd($part, $all_hds);
-	    add($hd, $part, $all_hds);
-	    $size -= $part->{size} + $part->{start} - $start;
-	    $start = $part->{start} + $part->{size};
-	}
-    }
-}
-
-sub auto_allocate {
-    my ($all_hds, $suggestions) = @_;
-    my $before = listlength(fsedit::get_all_fstab($all_hds));
-
-    allocatePartitions($all_hds, $suggestions || $suggestions{simple});
-    auto_allocate_raids($all_hds, $suggestions) if $suggestions;
-
-    partition_table::assign_device_numbers($_) foreach @{$all_hds->{hds}};
-
-    $before != listlength(fsedit::get_all_fstab($all_hds));
-}
-
-sub auto_allocate_raids {
-    my ($all_hds, $suggestions) = @_;
-
-    my @raids = grep { isRawRAID($_) } get_all_fstab($all_hds) or return;
-    if (@raids) {
-	require raid;
-	my @mds = grep { $_->{hd} =~ /md/ } @$suggestions;
-	foreach my $md (@mds) {
-	    my @raids_ = grep { !$md->{parts} || $md->{parts} =~ /\Q$_->{mntpoint}/ } @raids;
-	    @raids = difference2(\@raids, \@raids_);
-	    my $nb = raid::new($all_hds->{raids}, @raids_);
-	    my $part = $all_hds->{raids}[$nb];
-
-	    my %h = %$md;
-	    delete @h{'hd', 'parts'};
-	    put_in_hash($part, \%h); # mntpoint, level, chunk-size, type
-	    raid::updateSize($part);
-	}
-    }
-}
-
-sub undo_prepare {
-    my ($all_hds) = @_;
-    require Data::Dumper;
-    $Data::Dumper::Purity = 1;
-    foreach (@{$all_hds->{hds}}) {
-	my @h = @{$_}{@partition_table::fields2save};
-	push @{$_->{undo}}, Data::Dumper->Dump([\@h], ['$h']);
-    }
-}
-sub undo {
-    my ($all_hds) = @_;
-    foreach (@{$all_hds->{hds}}) {
-	my $h; eval pop @{$_->{undo}} || next;
-	@{$_}{@partition_table::fields2save} = @$h;
-
-	$_->{isDirty} = $_->{needKernelReread} = 1 if $_->{hasBeenDirty};
-    }
-    
-}
-
-sub move {
-    my ($hd, $part, $hd2, $sector2) = @_;
-
-    die 'TODO'; # doesn't work for the moment
-    my $part1 = { %$part };
-    my $part2 = { %$part };
-    $part2->{start} = $sector2;
-    $part2->{size} += $hd2->cylinder_size() - 1;
-    partition_table::remove($hd, $part);
-    {
-	local ($part2->{notFormatted}, $part2->{isFormatted}); #- do not allow partition::add to change this
-	partition_table::add($hd2, $part2);
-    }
-
-    return if $part2->{notFormatted} && !$part2->{isFormatted} || $::testing;
-
-    local (*F, *G);
-    sysopen F, $hd->{file}, 0 or die '';
-    sysopen G, $hd2->{file}, 2 or die _("Error opening %s for writing: %s", $hd2->{file}, "$!");
-
-    my $base = $part1->{start};
-    my $base2 = $part2->{start};
-    my $step = 10;
-    if ($hd eq $hd2) {
-	$base == $base2 and return;
-	$step = min($step, abs($base2 - $base));
-
-	if ($base < $base2) {
-	    $base  += $part1->{size} - $step;
-	    $base2 += $part1->{size} - $step;
-	    $step = -$step;
-	}
-    }
-
-    my $f = sub {
-	$base  < 0 and $base2 += -$base,  $base  = 0;
-	$base2 < 0 and $base  += -$base2, $base2 = 0;
-	c::lseek_sector(fileno(F), $base,  0) or die "seeking to sector $base failed on drive $hd->{device}";
-	c::lseek_sector(fileno(G), $base2, 0) or die "seeking to sector $base2 failed on drive $hd2->{device}";
-
-	my $buf;
-	sysread F, $buf, $SECTORSIZE * abs($_[0]) or die '';
-	syswrite G, $buf;
-    };
-
-    for (my $i = 0; $i < $part1->{size} / abs($step); $i++, $base += $step, $base2 += $step) {
-	print "$base $base2\n";
-	&$f($step);
-    }
-    if (my $v = ($part1->{size} % abs($step)) * sign($step)) {
-	$base += $v;
-	$base2 += $v;
-	&$f($v);
-    }
-}
-
-sub change_type {
-    my ($type, $hd, $part) = @_;
-    $type != $part->{type} or return;
-    check_type($type, $hd, $part);
-    $hd->{isDirty} = 1;
-    $part->{mntpoint} = '' if isSwap($part) && $part->{mntpoint} eq "swap";
-    $part->{mntpoint} = '' if isRawLVM({ type => $type }) || isRawRAID({ type => $type });
-    $part->{type} = $type;
-    $part->{notFormatted} = 1;
-    $part->{isFormatted} = 0;    
-}
-
-sub rescuept($) {
-    my ($hd) = @_;
-    my ($ext, @hd);
-
-    my $dev = devices::make($hd->{device});
-    local *F; open F, "rescuept $dev|";
-    local $_;
-    while (<F>) {
-	my ($st, $si, $id) = /start=\s*(\d+),\s*size=\s*(\d+),\s*Id=\s*(\d+)/ or next;
-	my $part = { start => $st, size => $si, type => hex($id) };
-	if (isExtended($part)) {
-	    $ext = $part;
-	} else {
-	    push @hd, $part;
-	}
-    }
-    close F or die "rescuept failed";
-
-    partition_table_raw::zero_MBR($hd);
-    foreach (@hd) {
-	my $b = partition_table::verifyInside($_, $ext);
-	if ($b) {
-	    $_->{start}--;
-	    $_->{size}++;
-	}
-	local $_->{notFormatted};
-
-	partition_table::add($hd, $_, ($b ? 'Extended' : 'Primary'), 1);
-    }
-}
-
-sub verifyHds {
-    my ($hds, $readonly, $ok) = @_;
-
-    if (is_empty_array_ref($hds)) { #- no way
-	die _("An error has occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem");
-    }
-
-    my @parts = readProcPartitions($hds);
-    foreach my $hd (@$hds) {
-	my @l1 = partition_table::get_normal_parts($hd);
-	my @l2 = grep { $_->{rootDevice} eq $hd->{device} } @parts;
-	if (int(@l1) != int(@l2) && arch() ne 'ppc') {
-	    log::l(sprintf
-		   "/proc/partitions doesn't agree with drakx %d != %d:\n%s\n", int(@l1), int(@l2),
-		   "/proc/partitions: " . join(", ", map { "$_->{device} ($_->{rootDevice})" } @parts));
-	    $ok = 0;
-	}
-    }
-
-    if ($readonly && !$ok) {
-	log::l("using /proc/partitions as diskdrake failed :(");
-	foreach my $hd (@$hds) {
-	    partition_table_raw::zero_MBR($hd);
-	    $hd->{primary} = { normal => [ grep { $hd->{device} eq $_->{rootDevice} } @parts ] };
-	}
-	$ok = 1;
-    }
-    $readonly && get_fstab(@$hds) == 0 and die _("You don't have any partitions!");
-    $ok;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
diff --git a/perl-install/ftp.pm b/perl-install/ftp.pm
deleted file mode 100644
index 20b837b8c..000000000
--- a/perl-install/ftp.pm
+++ /dev/null
@@ -1,84 +0,0 @@
-package ftp; # $Id$
-
-use Net::FTP;
-
-use network;
-use log;
-
-my %hosts;
-
-1;
-
-sub fromEnv() {
-    #- now URLPREFIX is generated from what is given by mdk-stage1 which is only this 4 variables.
-    $ENV{URLPREFIX} = "ftp://" . ($ENV{LOGIN} && ("$ENV{LOGIN}" . ($ENV{PASSWORD} && ":$ENV{PASSWORD}") . '@')) .
-      "$ENV{HOST}/$ENV{PREFIX}";
-    @ENV{qw(HOST PREFIX LOGIN PASSWORD)};
-}
-
-sub new {
-    my ($host, $prefix, $login, $password) = @_;
-    my @l = do { if ($hosts{"$host$prefix"}) {
-	@{$hosts{"$host$prefix"}};
-    } else {
-	my %options = (Passive => 1, Timeout => 60, Port => 21);
-	$options{Firewall} = $ENV{PROXY} if $ENV{PROXY};
-	$options{Port} = $ENV{PROXYPORT} if $ENV{PROXYPORT};
-	unless ($login) {
-	    $login = 'anonymous';
-	    $password = '-drakx@';
-	}
-
-	my $ftp;
-	foreach (1..10) {
-	    $ftp = Net::FTP->new(network::resolv($host), %options) or die;
-	    $ftp && $ftp->login($login, $password) and last;
-
-	    log::l("ftp login failed, sleeping before trying again");
-	    sleep 5 * $_;
-	}
-	$ftp or die "unable to open ftp connection to $host";
-	$ftp->binary;
-	$ftp->cwd($prefix);
-
-	my @l = ($ftp, \ (my $retr = undef));
-	$hosts{"$host$prefix"} = \@l;
-	@l;
-    }};
-    wantarray ? @l : $l[0];
-}
-
-sub getFile {
-    my ($f, @para) = @_;
-    $f eq 'XXX' and rewindGetFile(), return; #- special case to force closing connection.
-    foreach (1..3) {
-	my ($ftp, $retr) = new(@para ? @para : fromEnv);
-	$$retr->close if $$retr;
-	$$retr = $ftp->retr($f) and return $$retr;
-	($ftp->code == 550) and log::l("FTP: 550 file unavailable"), return;
-	rewindGetFile();
-	log::l("ftp get failed, sleeping before trying again");
-	sleep 1;
-    }
-}
-
-#-sub closeFiles() {
-#-    #- close any existing connections
-#-    foreach (values %hosts) {
-#-	  my $retr = $_->[1] if ref $_;
-#-	  $$retr->close if $$retr;
-#-	  undef $$retr;
-#-    }
-#-}
-
-sub rewindGetFile() {
-    #- close any existing connection.
-    foreach (values %hosts) {
-	my ($ftp, $retr) = @{$_ || []};
-	$$retr->close if $$retr;
-	$ftp->close() if $ftp;
-    }
-
-    #- make sure to reconnect to server.
-    %hosts = ();
-}
diff --git a/perl-install/g_auto_install b/perl-install/g_auto_install
deleted file mode 100755
index dd7655ee5..000000000
--- a/perl-install/g_auto_install
+++ /dev/null
@@ -1,53 +0,0 @@
-#!/usr/bin/perl
-
-my $dir = `pwd`;
-chomp $dir;
-$dir .= "/../../..";
-
-#- avoid polluting environment with specific locales.
-delete $ENV{$_} foreach qw(LC_MONETARY LC_CTYPE LC_NUMERIC LC_MESSAGES LC_TIME LC_COLLATE LANGUAGE LANG RPM_INSTALL_LANG);
-
-if ($ENV{DISPLAY}) {
-    system "xset", "+fp", "$dir/usr/X11R6/lib/X11/fonts/";
-    system "xset", "fp", "rehash";
-}
-
-#- perl version of the install, we use directly the version we found,
-#- this means there SHOULD BE no module compiled for an older version of perl
-#- which will be used by DrakX.
-my ($version, $arch) = (glob "$dir/usr/lib/perl5/*/*/CORE/libperl.so")[0] =~ m|$dir/usr/lib/perl5/([^/]*)/([^/]*)/CORE/libperl.so|;
-
-#- keep it mind the ELF loader to use.
-$ENV{LD_LOADER} = "$dir/lib/ld-linux.so.2";
-
-$ENV{LOCPATH}="$dir/usr/share/locale";
-$ENV{GCONV_PATH}="$dir/usr/lib/gconv";
-$ENV{PERL5LIB} = join ":", map { "$dir/usr/lib/perl5/$_" } ("$version/$arch",
-							    "$version",
-							    "site_perl/$version/$arch",
-							    "site_perl/$version",
-							    "site_perl");
-$ENV{LD_LIBRARY_PATH} = "$dir/usr/bin:$dir/bin:$dir/sbin:$dir/usr/sbin:$dir/usr/X11R6/bin:$dir/lib:$dir/usr/lib:$dir/usr/lib/perl5/$version/$arch/CORE";
-$ENV{PATH} = join(":", map { "$dir/$_" } split ":", "/usr/bin:/bin:/sbin:/usr/sbin:/usr/X11R6/bin") . ":$ENV{PATH}";
-$ENV{SHARE_PATH} = "$dir/usr/share";
-$ENV{RPMRC_FILE} = "$dir/usr/lib/rpm/rpmrc";
-$ENV{GTK_DATA_PREFIX} = "$dir/usr";
-$ENV{GTK_EXE_PREFIX} = "$dir/usr";
-$ENV{GDK_IMLIB_PATH} = "$dir/usr/lib";
-
-system $ENV{LD_LOADER}, "../perl", "./install2", "--g_auto_install", @ARGV;
-
-#- at this point, unwind above else they will not run correctly (wrong ld-linux.so.2)
-delete $ENV{GTK_EXE_PREFIX};
-delete $ENV{RPMRC_FILE};
-delete $ENV{LOCPATH};
-delete $ENV{SHARE_PATH};
-delete $ENV{PATH};
-delete $ENV{LD_LIBRARY_PATH};
-delete $ENV{PERL5LIB};
-delete $ENV{LD_LOADER};
-
-if ($ENV{DISPLAY}) {
-    system "xset", "-fp", "$dir/usr/X11R6/lib/X11/fonts/";
-    system "xset", "fp", "rehash";
-}
diff --git a/perl-install/getpkgs_deps b/perl-install/getpkgs_deps
deleted file mode 100755
index bc2d5e0e8..000000000
--- a/perl-install/getpkgs_deps
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/usr/bin/perl
-
-use diagnostics;
-use strict;
-
-use lib qw(/usr/bin/perl-install . c c/blib/arch);
-use pkgs_deps;
-use pkgs;
-
-pkgs_deps::main(pkgs::psUsingDirectory());
diff --git a/perl-install/help.pm b/perl-install/help.pm
deleted file mode 100644
index c5dd184e3..000000000
--- a/perl-install/help.pm
+++ /dev/null
@@ -1,839 +0,0 @@
-package help;
-use common;
-
-# IMPORTANT: Don't edit this File - It is automatically generated 
-#            from the manuals !!! 
-#            Write a mail to <doc@linux-mandrake.com> if you want 
-#            it changed.
-
-%steps = (
-empty => '',
-
-addUser => 
-__("GNU/Linux is a multiuser system, and this means that each user can have his
-own preferences, his own files and so on. You can read the ``User Guide''
-to learn more. But unlike \"root\", which is the administrator, the users
-you will add here will not be entitled to change anything except their own
-files and their own configuration. You will have to create at least one
-regular user for yourself. That account is where you should log in for
-routine use. Although it is very practical to log in as \"root\" everyday,
-it may also be very dangerous! The slightest mistake could mean that your
-system would not work any more. If you make a serious mistake as a regular
-user, you may only lose some information, but not the entire system.
-
-First, you have to enter your real name. This is not mandatory, of course -
-as you can actually enter whatever you want. DrakX will then take the first
-word you have entered in the box and will bring it over to the \"User
-name\". This is the name this particular user will use to log into the
-system. You can change it. You then have to enter a password here. A
-non-privileged (regular) user's password is not as crucial as that of
-\"root\" from a security point of view, but that is no reason to neglect it
-- after all, your files are at risk.
-
-If you click on \"Accept user\", you can then add as many as you want. Add
-a user for each one of your friends: your father or your sister, for
-example. When you finish adding all the users you want, select \"Done\".
-
-Clicking the \"Advanced\" button allows you to change the default \"shell\"
-for that user (bash by default)."),
-
-ask_mntpoint_s => 
-__("Listed above are the existing Linux partitions detected on your hard drive.
-You can keep the choices made by the wizard, they are good for most common
-installs. If you make any changes, you must at least define a root
-partition (\"/\"). Do not choose too small a partition or you will not be
-able to install enough software. If you want to store your data on a
-separate partition, you will also need to create a partition for \"/home\"
-(only possible if you have more than one Linux partition available).
-
-Each partition is listed as follows: \"Name\", \"Capacity\".
-
-\"Name\" is structured: \"hard drive type\", \"hard drive number\",
-\"partition number\" (for example, \"hda1\").
-
-\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and
-\"sd\" if it is a SCSI hard drive.
-
-\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE
-hard drives:
-
- * \"a\" means \"master hard drive on the primary IDE controller\",
-
- * \"b\" means \"slave hard drive on the primary IDE controller\",
-
- * \"c\" means \"master hard drive on the secondary IDE controller\",
-
- * \"d\" means \"slave hard drive on the secondary IDE controller\".
-
-With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means
-\"second lowest SCSI ID\", etc."),
-
-chooseCd => 
-__("The Mandrake Linux installation is spread out over several CDROMs. DrakX
-knows if a selected package is located on another CDROM and will eject the
-current CD and ask you to insert a different one as required."),
-
-choosePackages => 
-__("It is now time to specify which programs you wish to install on your
-system. There are thousands of packages available for Mandrake Linux, and
-you are not supposed to know them all by heart.
-
-If you are performing a standard installation from CDROM, you will first be
-asked to specify the CDs you currently have (in Expert mode only). Check
-the CD labels and highlight the boxes corresponding to the CDs you have
-available for installation. Click \"OK\" when you are ready to continue.
-
-Packages are sorted in groups corresponding to a particular use of your
-machine. The groups themselves are sorted into four sections:
-
- * \"Workstation\": if you plan to use your machine as a workstation, select
-one or more of the corresponding groups.
-
- * \"Development\": if the machine is to be used for programming, choose the
-desired group(s).
-
- * \"Server\": if the machine is intended to be a server, you will be able
-to select which of the most common services you wish to see installed on
-the machine.
-
- * \"Graphical Environment\": finally, this is where you will choose your
-preferred graphical environment. At least one must be selected if you want
-to have a graphical workstation!
-
-Moving the mouse cursor over a group name will display a short explanatory
-text about that group.
-
-You can check the \"Individual package selection\" box, which is useful if
-you are familiar with the packages being offered or if you want to have
-total control over what will be installed.
-
-If you started the installation in \"Update\" mode, you can unselect all
-groups to avoid installing any new package. This is useful for repairing or
-updating an existing system."),
-
-choosePackagesTree => 
-__("Finally, depending on your choice of whether or not to select individual
-packages, you will be presented a tree containing all packages classified
-by groups and subgroups. While browsing the tree, you can select entire
-groups, subgroups, or individual packages.
-
-Whenever you select a package on the tree, a description appears on the
-right. When your selection is finished, click the \"Install\" button which
-will then launch the installation process. Depending on the speed of your
-hardware and the number of packages that need to be installed, it may take
-a while to complete the process. A time to complete estimate is displayed
-on the screen to help you gauge if there is sufficient time to enjoy a cup
-of coffee.
-
-!! If a server package has been selected either intentionally or because it
-was part of a whole group, you will be asked to confirm that you really
-want those servers to be installed. Under Mandrake Linux, any installed
-servers are started by default at boot time. Even if they are safe and have
-no known issues at the time the distribution was shipped, it may happen
-that security holes are discovered after this version of Mandrake Linux was
-finalized. If you do not know what a particular service is supposed to do
-or why it is being installed, then click \"No\". Clicking \"Yes\" will
-install the listed services and they will be started automatically by
-default. !!
-
-The \"Automatic dependencies\" option simply disables the warning dialog
-which appears whenever the installer automatically selects a package. This
-occurs because it has determined that it needs to satisfy a dependency with
-another package in order to successfully complete the installation.
-
-The tiny floppy disc icon at the bottom of the list allows to load the
-packages list chosen during a previous installation. Clicking on this icon
-will ask you to insert a floppy disk previously created at the end of
-another installation. See the second tip of last step on how to create such
-a floppy."),
-
-configureNetwork => 
-__("If you wish to connect your computer to the Internet or to a local network,
-please choose the correct option. Please turn on your device before
-choosing the correct option to let DrakX detect it automatically.
-
-Mandrake Linux proposes the configuration of an Internet connection at
-installation time. Available connections are: traditional modem, ISDN
-modem, ADSL connection, cable modem, and finally a simple LAN connection
-(Ethernet).
-
-Here, we will not detail each configuration. Simply make sure that you have
-all the parameters from your Internet Service Provider or system
-administrator.
-
-You can consult the manual chapter about Internet connections for details
-about the configuration, or simply wait until your system is installed and
-use the program described there to configure your connection.
-
-If you wish to configure the network later after installation or if you
-have finished configuring your network connection, click \"Cancel\"."),
-
-configureServices => 
-__("You may now choose which services you wish to start at boot time.
-
-Here are presented all the services available with the current
-installation. Review them carefully and uncheck those which are not always
-needed at boot time.
-
-You can get a short explanatory text about a service by selecting a
-specific service. However, if you are not sure whether a service is useful
-or not, it is safer to leave the default behavior.
-
-At this stage, be very careful if you intend to use your machine as a
-server: you will probably not want to start any services that you do not
-need. Please remember that several services can be dangerous if they are
-enabled on a server. In general, select only the services you really need."),
-
-configureTimezoneGMT => 
-__("GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in
-local time according to the time zone you selected."),
-
-configureX => 
-__("X (for X Window System) is the heart of the GNU/Linux graphical interface
-on which all the graphics environments (KDE, Gnome, AfterStep,
-WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX
-will try to configure X automatically.
-
-It is extremely rare for it to fail, unless the hardware is very old (or
-very new). If it succeeds, it will start X automatically with the best
-resolution possible depending on the size of the monitor. A window will
-then appear and ask you if you can see it.
-
-If you are doing an \"Expert\" install, you will enter the X configuration
-wizard. See the corresponding section of the manual for more information
-about this wizard.
-
-If you can see the message and answer \"Yes\", then DrakX will proceed to
-the next step. If you cannot see the message, it simply means that the
-configuration was wrong and the test will automatically end after 10
-seconds, restoring the screen."),
-
-configureXmain => 
-__("The first time you try the X configuration, you may not be very satisfied
-with its display (screen is too small, shifted left or right...). Hence,
-even if X starts up correctly, DrakX then asks you if the configuration
-suits you. It will also propose to change it by displaying a list of valid
-modes it could find, asking you to select one.
-
-As a last resort, if you still cannot get X to work, choose \"Change
-graphics card\", select \"Unlisted card\", and when prompted on which
-server you want, choose \"FBDev\". This is a failsafe option which works
-with any modern graphics card. Then choose \"Test again\" to be sure."),
-
-configureXxdm => 
-__("Finally, you will be asked whether you want to see the graphical interface
-at boot. Note this question will be asked even if you chose not to test the
-configuration. Obviously, you want to answer \"No\" if your machine is to
-act as a server, or if you were not successful in getting the display
-configured."),
-
-createBootdisk => 
-__("The Mandrake Linux CDROM has a built-in rescue mode. You can access it by
-booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at
-the prompt. But in case your computer cannot boot from the CDROM, you
-should come back to this step for help in at least two situations:
-
- * when installing the boot loader, DrakX will rewrite the boot sector (MBR)
-of your main disk (unless you are using another boot manager) so that you
-can start up with either Windows or GNU/Linux (assuming you have Windows in
-your system). If you need to reinstall Windows, the Microsoft install
-process will rewrite the boot sector, and then you will not be able to
-start GNU/Linux!
-
- * if a problem arises and you cannot start up GNU/Linux from the hard disk,
-this floppy disk will be the only means of starting up GNU/Linux. It
-contains a fair number of system tools for restoring a system, which has
-crashed due to a power failure, an unfortunate typing error, a typo in a
-password, or any other reason.
-
-When you click on this step, you will be asked to enter a disk inside the
-drive. The floppy disk you will insert must be empty or contain data which
-you do not need. You will not have to format it since DrakX will rewrite
-the whole disk."),
-
-doPartitionDisks => 
-__("At this point you need to choose where on your hard drive to install your
-Mandrake Linux operating system. If your hard drive is empty or if an
-existing operating system is using all the space available, you will need
-to partition it. Basically, partitioning a hard drive consists of logically
-dividing it to create space to install your new Mandrake Linux system.
-
-Because the effects of the partitioning process are usually irreversible,
-partitioning can be intimidating and stressful if you are an inexperienced
-user. Fortunately, there is a wizard which simplifies this process. Before
-beginning, please consult the manual and take your time.
-
-If you are running the install in Expert mode, you will enter DiskDrake,
-the Mandrake Linux partitioning tool, which allows you to fine-tune your
-partitions. See the DiskDrake chapter of the manual. From the installation
-interface, you can use the wizards as described here by clicking the
-\"Wizard\" button of the dialog.
-
-If partitions have already been defined, either from a previous
-installation or from another partitioning tool, simply select those to
-install your Linux system.
-
-If partitions are not defined, you will need to create them using the
-wizard. Depending on your hard drive configuration, several options are
-available:
-
- * \"Use free space\": this option will simply lead to an automatic
-partitioning of your blank drive(s). You will not be prompted further.
-
- * \"Use existing partition\": the wizard has detected one or more existing
-Linux partitions on your hard drive. If you want to use them, choose this
-option.
-
- * \"Use the free space on the Windows partition\": if Microsoft Windows is
-installed on your hard drive and takes all the space available on it, you
-have to create free space for Linux data. To do that, you can delete your
-Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert
-mode\" solutions) or resize your Microsoft Windows partition. Resizing can
-be performed without the loss of any data. This solution is recommended if
-you want to use both Mandrake Linux and Microsoft Windows on same computer.
-
-   Before choosing this option, please understand that after this procedure,
-the size of your Microsoft Windows partition will be smaller than at the
-present time. You will have less free space under Microsoft Windows to
-store your data or to install new software.
-
- * \"Erase entire disk\": if you want to delete all data and all partitions
-present on your hard drive and replace them with your new Mandrake Linux
-system, choose this option. Be careful with this solution because you will
-not be able to revert your choice after confirmation.
-
-   !! If you choose this option, all data on your disk will be lost. !!
-
- * \"Remove Windows\": this will simply erase everything on the drive and
-begin fresh, partitioning everything from scratch. All data on your disk
-will be lost.
-
-   !! If you choose this option, all data on your disk will be lost. !!
-
- * \"Expert mode\": choose this option if you want to manually partition
-your hard drive. Be careful - it is a powerful but dangerous choice. You
-can very easily lose all your data. Hence, do not choose this unless you
-know what you are doing."),
-
-exitInstall => 
-__("There you are. Installation is now complete and your GNU/Linux system is
-ready to use. Just click \"OK\" to reboot the system. You can start
-GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as
-soon as the computer has booted up again.
-
-The \"Advanced\" button (in Expert mode only) shows two more buttons to:
-
- * \"generate auto-install floppy\": to create an installation floppy disk
-which will automatically perform a whole installation without the help of
-an operator, similar to the installation you just configured.
-
-   Note that two different options are available after clicking the button:
-
-    * \"Replay\". This is a partially automated install as the partitioning
-step (and only this one) remains interactive.
-
-    * \"Automated\". Fully automated install: the hard disk is completely
-rewritten, all data is lost.
-
-   This feature is very handy when installing a great number of similar
-machines. See the Auto install section at our web site.
-
- * \"Save packages selection\"(*) : saves the packages selection as made
-previously. Then, when doing another installation, insert the floppy inside
-the driver and run the installation going to the help screen by pressing on
-the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.
-
-(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type
-\"mformat a:\")"),
-
-formatPartitions => 
-__("Any partitions that have been newly defined must be formatted for use
-(formatting means creating a file system).
-
-At this time, you may wish to reformat some already existing partitions to
-erase any data they contain. If you wish to do that, please select those
-partitions as well.
-
-Please note that it is not necessary to reformat all pre-existing
-partitions. You must reformat the partitions containing the operating
-system (such as \"/\", \"/usr\" or \"/var\") but you do not have to
-reformat partitions containing data that you wish to keep (typically
-\"/home\").
-
-Please be careful when selecting partitions. After formatting, all data on
-the selected partitions will be deleted and you will not be able to recover
-any of them.
-
-Click on \"OK\" when you are ready to format partitions.
-
-Click on \"Cancel\" if you want to choose another partition for your new
-Mandrake Linux operating system installation.
-
-Click on \"Advanced\" if you wish to select partitions that will be checked
-for bad blocks on the disc."),
-
-installPackages => 
-__("Your new Mandrake Linux operating system is currently being installed.
-Depending on the number of packages you will be installing and the speed of
-your computer, this operation could take from a few minutes to a
-significant amount of time.
-
-Please be patient."),
-
-license => 
-__("Before continuing you should read carefully the terms of the license. It
-covers the whole Mandrake Linux distribution, and if you do not agree with
-all the terms in it, click on the \"Refuse\" button which will immediately
-terminate the installation. To continue with the installation, click the
-\"Accept\" button."),
-
-miscellaneous => 
-__("At this point, it is time to choose the security level desired for the
-machine. As a rule of thumb, the more exposed the machine is, and the more
-the data stored in it is crucial, the higher the security level should be.
-However, a higher security level is generally obtained at the expenses of
-easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to
-get more information about the meaning of these levels.
-
-If you do not know what to choose, keep the default option."),
-
-partition_with_diskdrake => 
-__("At this point, you need to choose what partition(s) will be used for the
-installation of your Mandrake Linux system. If partitions have been already
-defined, either from a previous installation of GNU/Linux or from another
-partitioning tool, you can use existing partitions. Otherwise hard drive
-partitions must be defined.
-
-To create partitions, you must first select a hard drive. You can select
-the disk for partitioning by clicking on \"hda\" for the first IDE drive,
-\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.
-
-To partition the selected hard drive, you can use these options:
-
- * \"Clear all\": this option deletes all partitions on the selected hard
-drive.
-
- * \"Auto allocate\": this option allows you to automatically create Ext2
-and swap partitions in free space of your hard drive.
-
- * \"Rescue partition table\": if your partition table is damaged, you can
-try to recover it using this option. Please be careful and remember that it
-can fail.
-
- * \"Undo\": use this option to cancel your changes.
-
- * \"Reload\": you can use this option if you wish to undo all changes and
-load your initial partitions table.
-
- * \"Wizard\": use this option if you wish to use a wizard to partition your
-hard drive. This is recommended if you do not have a good knowledge of
-partitioning.
-
- * \"Restore from floppy\": this option will allow you to restore a
-previously saved partition table from floppy disk.
-
- * \"Save to floppy\": saves the partition table to a floppy. Useful for
-later partition-table recovery if necessary. It is strongly recommended to
-perform this step.
-
- * \"Done\": when you have finished partitioning your hard drive, this will
-save your changes back to disc.
-
-Note: you can reach any option using the keyboard. Navigate through the
-partitions using [Tab] and [Up/Down] arrows.
-
-When a partition is selected, you can use:
-
- * Ctrl-c to create a new partition (when an empty partition is selected);
-
- * Ctrl-d to delete a partition;
-
- * Ctrl-m to set the mount point.
-
-If you are installing on a PPC machine, you will want to create a small HFS
-\"bootstrap\" partition of at least 1MB which will be used by the yaboot
-boot loader. If you opt to make the partition a bit larger, say 50MB, you
-may find it a useful place to store a spare kernel and ramdisk images for
-emergency boot situations."),
-
-resizeFATChoose => 
-__("More than one Microsoft Windows partition has been detected on your hard
-drive. Please choose the one you want to resize in order to install your
-new Mandrake Linux operating system.
-
-Each partition is listed as follows: \"Linux name\", \"Windows name\"
-\"Capacity\".
-
-\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",
-\"partition number\" (for example, \"hda1\").
-
-\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and
-\"sd\" if it is a SCSI hard drive.
-
-\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE
-hard drives:
-
- * \"a\" means \"master hard drive on the primary IDE controller\",
-
- * \"b\" means \"slave hard drive on the primary IDE controller\",
-
- * \"c\" means \"master hard drive on the secondary IDE controller\",
-
- * \"d\" means \"slave hard drive on the secondary IDE controller\".
-
-With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means
-\"second lowest SCSI ID\", etc.
-
-\"Windows name\" is the letter of your hard drive under Windows (the first
-disk or partition is called \"C:\")."),
-
-resizeFATWait => 
-__("Please be patient. This operation can take several minutes."),
-
-selectInstallClass => 
-__("DrakX now needs to know if you want to perform a default (\"Recommended\")
-installation or if you want to have greater control (\"Expert\"). You also
-have the choice of performing a new install or an upgrade of an existing
-Mandrake Linux system. Clicking \"Install\" will completely wipe out the
-old system. Select \"Upgrade\" if you are upgrading or repairing an
-existing system.
-
-Please choose \"Install\" if there are no previous version of Mandrake
-Linux installed or if you wish to boot between various operating systems.
-
-Please choose \"Update\" if you wish to update or repair an already
-installed version of Mandrake Linux.
-
-Depending on your knowledge of GNU/Linux, please choose one of the
-following to install or update your Mandrake Linux operating system:
-
- * Recommended: choose this if you have never installed a GNU/Linux
-operating system. The installation will be very easy and you will only be
-asked a few questions.
-
- * Expert: if you have a good knowledge of GNU/Linux, you can choose this
-installation class. The expert installation will allow you to perform a
-highly customized installation. Answering some of the questions can be
-difficult if you do not have a good knowledge of GNU/Linux so do not choose
-this unless you know what you are doing."),
-
-selectKeyboard => 
-__("Normally, DrakX selects the right keyboard for you (depending on the
-language you have chosen) and you will not even see this step. However, you
-might not have a keyboard that corresponds exactly to your language: for
-example, if you are an English speaking Swiss person, you may still want
-your keyboard to be a Swiss keyboard. Or if you speak English but are
-located in Quebec, you may find yourself in the same situation. In both
-cases, you will have to go back to this installation step and select an
-appropriate keyboard from the list.
-
-Click on the \"More\" button to be presented with the complete list of
-supported keyboards."),
-
-selectLanguage => 
-__("Please choose your preferred language for installation and system usage.
-
-Clicking on the \"Advanced\" button will allow you to select other
-languages to be installed on your workstation. Selecting other languages
-will install the language-specific files for system documentation and
-applications. For example, if you will host users from Spain on your
-machine, select English as the main language in the tree view and in the
-Advanced section click on the grey star corresponding to \"Spanish|Spain\".
-
-Note that multiple languages may be installed. Once you have selected any
-additional locales click the \"OK\" button to continue."),
-
-selectMouse => 
-__("By default, DrakX assumes you have a two-button mouse and will set it up
-for third-button emulation. DrakX will automatically know whether it is a
-PS/2, serial or USB mouse.
-
-If you wish to specify a different type of mouse select the appropriate
-type from the list provided.
-
-If you choose a mouse other than the default you will be presented with a
-mouse test screen. Use the buttons and wheel to verify that the settings
-are good. If the mouse is not working correctly press the space bar or
-RETURN to \"Cancel\" and choose again."),
-
-selectSerialPort => 
-__("Please select the correct port. For example, the COM1 port under MS Windows
-is named ttyS0 under GNU/Linux."),
-
-setRootPassword => 
-__("This is the most crucial decision point for the security of your GNU/Linux
-system: you have to enter the \"root\" password. \"root\" is the system
-administrator and is the only one authorized to make updates, add users,
-change the overall system configuration, and so on. In short, \"root\" can
-do everything! That is why you must choose a password that is difficult to
-guess - DrakX will tell you if it is too easy. As you can see, you can
-choose not to enter a password, but we strongly advise you against this if
-only for one reason: do not think that because you booted GNU/Linux that
-your other operating systems are safe from mistakes. Since \"root\" can
-overcome all limitations and unintentionally erase all data on partitions
-by carelessly accessing the partitions themselves, it is important for it
-to be difficult to become \"root\".
-
-The password should be a mixture of alphanumeric characters and at least 8
-characters long. Never write down the \"root\" password - it makes it too
-easy to compromise a system.
-
-However, please do not make the password too long or complicated because
-you must be able to remember it without too much effort.
-
-The password will not be displayed on screen as you type it in. Hence, you
-will have to type the password twice to reduce the chance of a typing
-error. If you do happen to make the same typing error twice, this
-\"incorrect\" password will have to be used the first time you connect.
-
-In expert mode, you will be asked if you will be connecting to an
-authentication server, like NIS or LDAP.
-
-If your network uses LDAP (or NIS) protocol for authentication, select
-\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your
-network administrator.
-
-If your computer is not connected to any administrated network, you will
-want to choose \"Local files\" for authentication."),
-
-setupBootloader => 
-__("LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is
-totally automated. In fact, DrakX analyzes the disk boot sector and acts
-accordingly, depending on what it finds here:
-
- * if Windows boot sector is found, it will replace it with a GRUB/LILO boot
-sector. Hence, you will be able to load either GNU/Linux or another OS;
-
- * if a GRUB or LILO boot sector is found, it will replace it with a new
-one;
-
-If in doubt, DrakX will display a dialog with various options.
-
- * \"Boot loader to use\": you have three choices:
-
-    * \"LILO with graphical menu\": if you prefer LILO with its graphical
-interface.
-
-    * \"GRUB\": if you prefer GRUB (text menu).
-
-    * \"LILO with text menu\": if you prefer LILO with its text menu interface.
-
- * \"Boot device\": in most cases, you will not change the default
-(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the
-second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").
-
- * \"Delay before booting the default image\": when rebooting the computer,
-this is the delay granted to the user to choose - in the boot loader menu,
-another boot entry than the default one.
-
-!! Beware that if you choose not to install a boot loader (by selecting
-\"Cancel\" here), you must ensure that you have a way to boot your Mandrake
-Linux system! Also be sure you know what you do before changing any of the
-options. !!
-
-Clicking the \"Advanced\" button in this dialog will offer many advanced
-options, which are reserved to the expert user.
-
-Mandrake Linux installs its own boot loader, which will let you boot either
-GNU/Linux or any other operating systems which you have on your system.
-
-If there is another operating system installed on your machine, it will be
-automatically added to the boot menu. Here, you can choose to fine-tune the
-existing options. Double-clicking on an existing entry allows you to change
-its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes
-on to the next installation step."),
-
-setupBootloaderAddEntry => 
-__("LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot
-either GNU/Linux or any other operating system present on your computer.
-Normally, these other operating systems are correctly detected and
-installed. If this is not the case, you can add an entry by hand in this
-screen. Be careful to choose the correct parameters.
-
-You may also not want to give access to these other operating systems to
-anyone. In which case, you can delete the corresponding entries. But then,
-you will need a boot disk in order to boot those other operating systems!"),
-
-setupBootloaderBeginner => 
-__("You must indicate where you wish to place the information required to boot
-to GNU/Linux.
-
-Unless you know exactly what you are doing, choose \"First sector of drive
-(MBR)\"."),
-
-setupDefaultSpooler => 
-__("Here we select a printing system for your computer to use. Other OSes may
-offer you one, but Mandrake offers three.
-
- * \"pdq\" - which means ``print, don't queue'', is the choice if you have a
-direct connection to your printer and you want to be able to panic out of
-printer jams, and you do not have any networked printers. It will handle
-only very simple network cases and is somewhat slow for networks. Pick
-\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your
-choices after install by running PrinterDrake from the Mandrake Control
-Center and clicking the expert button.
-
- * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to
-your local printer and also halfway round the planet. It is simple and can
-act like a server or a client for the ancient \"lpd\" printing system, so
-it is compatible with the systems that went before. It can do many tricks,
-but the basic setup is almost as easy as \"pdq\". If you need this to
-emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has
-graphical front-ends for printing or choosing printer options.
-
- * \"lprNG\" - ``line printer daemon New Generation''. This system can do
-approximately the same things the others can do, but it will print to
-printers mounted on a Novell Network, because it supports IPX protocol, and
-it can print directly to shell commands. If you have need of Novell or
-printing to commands without using a separate pipe construct, use lprNG.
-Otherwise, CUPS is preferable as it is simpler and better at working over
-networks."),
-
-setupSCSI => 
-__("DrakX is now detecting any IDE devices present in your computer. It will
-also scan for one or more PCI SCSI card(s) on your system. If a SCSI card
-is found, DrakX will automatically install the appropriate driver.
-
-Because hardware detection will sometimes not detect a piece of hardware,
-DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"
-if you know that there is a SCSI card installed in your machine. You will
-be presented a list of SCSI cards to choose from. Click \"No\" if you have
-no SCSI hardware. If you are unsure you can check the list of hardware
-detected in your machine by selecting \"See hardware info\" and clicking
-\"OK\". Examine the list of hardware and then click on the \"OK\" button to
-return to the SCSI interface question.
-
-If you have to manually specify your adapter, DrakX will ask if you want to
-specify options for it. You should allow DrakX to probe the hardware for
-the card-specific options that the hardware needs to initialize. This
-usually works well.
-
-If DrakX is not able to probe for the options that need to be passed, you
-will need to manually provide options to the driver. Please review the
-``User Guide'' (chapter 3, section \"Collecting Information on Your
-Hardware\") for hints on retrieving the parameters required from hardware
-documentation, from the manufacturer's web site (if you have Internet
-access) or from Microsoft Windows (if you used this hardware with Windows
-on your system)."),
-
-setupYabootAddEntry => 
-__("You can add additional entries for yaboot, either for other operating
-systems, alternate kernels, or for an emergency boot image.
-
-For other OS's, the entry consists only of a label and the root partition.
-
-For Linux, there are a few possible options:
-
- * Label: this is simply the name you will have to type at the yaboot prompt
-to select this boot option.
-
- * Image: this would be the name of the kernel to boot. Typically, vmlinux
-or a variation of vmlinux with an extension.
-
- * Root: the \"root\" device or \"/\" for your Linux installation.
-
- * Append: on Apple hardware, the kernel append option is used quite often
-to assist in initializing video hardware, or to enable keyboard mouse
-button emulation for the often lacking 2nd and 3rd mouse buttons on a stock
-Apple mouse. The following are some examples:
-
-         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 hda=autotune
-
-         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111
-
- * Initrd: this option can be used either to load initial modules, before
-the boot device is available, or to load a ramdisk image for an emergency
-boot situation.
-
- * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you
-need to allocate a large ramdisk, this option can be used.
-
- * Read-write: normally the \"root\" partition is initially brought up in
-read-only, to allow a file system check before the system becomes \"live\".
-Here, you can override this option.
-
- * NoVideo: should the Apple video hardware prove to be exceptionally
-problematic, you can select this option to boot in \"novideo\" mode, with
-native frame buffer support.
-
- * Default: selects this entry as being the default Linux selection,
-selectable by just pressing ENTER at the yaboot prompt. This entry will
-also be highlighted with a \"*\", if you press [Tab] to see the boot
-selections."),
-
-setupYabootGeneral => 
-__("Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot
-either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,
-these other operating systems are correctly detected and installed. If this
-is not the case, you can add an entry by hand in this screen. Be careful as
-to choose the correct parameters.
-
-Yaboot's main options are:
-
- * Init Message: a simple text message that is displayed before the boot
-prompt.
-
- * Boot Device: indicate where you want to place the information required to
-boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to
-hold this information.
-
- * Open Firmware Delay: unlike LILO, there are two delays available with
-yaboot. The first delay is measured in seconds and at this point, you can
-choose between CD, OF boot, MacOS or Linux.
-
- * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.
-After selecting Linux, you will have this delay in 0.1 second before your
-default kernel description is selected.
-
- * Enable CD Boot?: checking this option allows you to choose \"C\" for CD
-at the first boot prompt.
-
- * Enable OF Boot?: checking this option allows you to choose \"N\" for Open
-Firmware at the first boot prompt.
-
- * Default OS: you can select which OS will boot by default when the Open
-Firmware Delay expires."),
-
-summary => 
-__("Here are presented various parameters concerning your machine. Depending on
-your installed hardware, you may - or not, see the following entries:
-
- * \"Mouse\": check the current mouse configuration and click on the button
-to change it if necessary.
-
- * \"Keyboard\": check the current keyboard map configuration and click on
-the button to change that if necessary.
-
- * \"Timezone\": DrakX, by default, guesses your time zone from the language
-you have chosen. But here again, as for the choice of a keyboard, you may
-not be in the country for which the chosen language should correspond.
-Hence, you may need to click on the \"Timezone\" button in order to
-configure the clock according to the time zone you are in.
-
- * \"Printer\": clicking on the \"No Printer\" button will open the printer
-configuration wizard.
-
- * \"Sound card\": if a sound card is detected on your system, it is
-displayed here. No modification possible at installation time.
-
- * \"TV card\": if a TV card is detected on your system, it is displayed
-here. No modification possible at installation time.
-
- * \"ISDN card\": if an ISDN card is detected on your system, it is
-displayed here. You can click on the button to change the parameters
-associated to it."),
-
-takeOverHdChoose => 
-__("Choose the hard drive you want to erase to install your new Mandrake Linux
-partition. Be careful, all data present on it will be lost and will not be
-recoverable!"),
-
-takeOverHdConfirm => 
-__("Click on \"OK\" if you want to delete all data and partitions present on
-this hard drive. Be careful, after clicking on \"OK\", you will not be able
-to recover any data and partitions present on this hard drive, including
-any Windows data.
-
-Click on \"Cancel\" to cancel this operation without losing any data and
-partitions present on this hard drive."),
-);
diff --git a/perl-install/http.pm b/perl-install/http.pm
deleted file mode 100644
index d04f90435..000000000
--- a/perl-install/http.pm
+++ /dev/null
@@ -1,41 +0,0 @@
-package http; # $Id$
-
-use IO::Socket;
-use network;
-
-
-my $sock;
-
-sub getFile {
-    local($^W) = 0;
-
-    my ($host, $port, $path) = $ENV{URLPREFIX} =~ m,^http://([^/:]+)(?::(\d+))?(/\S*)?$,;
-    $host = network::resolv($host);
-    $path .= "/$_[0]";
-
-    $sock->close if $sock;
-    $_[0] eq 'XXX' and return; #- force closing connection.
-    $sock = IO::Socket::INET->new(PeerAddr => $host,
-				  PeerPort => $port || 80,
-				  Proto    => 'tcp',
-				  Timeout  => 60) or die "can't connect ";
-    $sock->autoflush;
-    print $sock join("\015\012" =>
-		     "GET $path HTTP/1.0",
-		     "Host: $host" . ($port && ":$port"),
-		     "User-Agent: DrakX/vivelinuxabaszindozs",
-		     "", "");
-
-    #- skip until empty line
-    my ($now, $last, $buf, $tmp) = 0;
-    my $read = sub { sysread($sock, $buf, 1) || die; $tmp .= $buf };
-    do {
-	$last = $now;
-	&$read; &$read if $buf =~ /\015/;
-	$now = $buf =~ /\012/;
-    } until ($now && $last);
-
-    $tmp =~ /^.*\b200\b/ ? $sock : undef;
-}
-
-1;
diff --git a/perl-install/install2 b/perl-install/install2
deleted file mode 100755
index ad6ee374f..000000000
--- a/perl-install/install2
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/usr/bin/perl
-
-#- Mandrake Graphic Install $Id$
-#- Copyright (C) 1999/2000 MandrakeSoft (pixel@mandrakesoft.com)
-#-
-#- This program is free software; you can redistribute it and/or modify
-#- it under the terms of the GNU General Public License as published by
-#- the Free Software Foundation; either version 2, or (at your option)
-#- any later version.
-#-
-#- This program is distributed in the hope that it will be useful,
-#- but WITHOUT ANY WARRANTY; without even the implied warranty of
-#- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#- GNU General Public License for more details.
-#-
-#- You should have received a copy of the GNU General Public License
-#- along with this program; if not, write to the Free Software
-#- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use diagnostics;
-use strict;
-
-use lib qw(/usr/bin/perl-install .);
-use install2;
-
-$::testing = $ENV{PERL_INSTALL_TEST};
-$::isStandalone = 0;
-
-install2::main(@ARGV);
-
-c::_exit(0);
diff --git a/perl-install/install2.pm b/perl-install/install2.pm
deleted file mode 100644
index ccfe1e526..000000000
--- a/perl-install/install2.pm
+++ /dev/null
@@ -1,600 +0,0 @@
-
-package install2; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($o $version);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use steps;
-use common;
-use install_any qw(:all);
-use install_steps;
-use lang;
-use keyboard;
-use mouse;
-use fsedit;
-use devices;
-use partition_table qw(:types);
-use modules;
-use detect_devices;
-use run_program;
-use any;
-use log;
-use fs;
-#-$::corporate=1;
-
-
-#-#######################################################################################
-#-$O
-#-the big struct which contain, well everything (globals + the interactive methods ...)
-#-if you want to do a kickstart file, you just have to add all the required fields (see for example
-#-the variable $default)
-#-#######################################################################################
-$o = $::o = {
-#    bootloader => { linear => 0, lba32 => 1, message => 1, timeout => 5, restricted => 0 },
-    mkbootdisk => 0, #- no mkbootdisk if 0 or undef, find a floppy with 1, or fd1
-#-    packages   => [ qw() ],
-    partitioning => { clearall => 0, eraseBadPartitions => 0, auto_allocate => 0 }, #-, readonly => 0 },
-    security => 2,
-    authentication => { md5 => 1, shadow => 1 },
-    lang         => 'en_US',
-    isUpgrade    => 0,
-    toRemove     => [],
-    toSave       => [],
-#-    simple_themes => 1,
-
-    timezone => {
-#-                   timezone => "Europe/Paris",
-#-                   UTC      => 1,
-                },
-#-    superuser => { password => 'a', shell => '/bin/bash', realname => 'God' },
-#-    user => { name => 'foo', password => 'bar', home => '/home/foo', shell => '/bin/bash', realname => 'really, it is foo' },
-
-#-    keyboard => 'de',
-#-    display => "192.168.1.19:1",
-    steps        => \%steps::installSteps,
-    orderedSteps => \@steps::orderedInstallSteps,
-
-#- for the list of fields available for user and superuser, see @etc_pass_fields in install_steps.pm
-#-    intf => { eth0 => { DEVICE => "eth0", IPADDR => '1.2.3.4', NETMASK => '255.255.255.128' } },
-
-#-step : the current one
-#-prefix
-#-mouse
-#-keyboard
-#-netc
-#-methods
-#-packages compss
-#-printer haveone entry(cf printer.pm)
-
-};
-
-
-sub installStepsCall {
-    my ($o, $auto, $fun, @args) = @_;
-    $fun = "install_steps::$fun" if $auto;
-    $o->$fun(@args);
-}
-
-#-######################################################################################
-#- Steps Functions
-#- each step function are called with two arguments : clicked(because if you are a
-#- beginner you can force the the step) and the entered number
-#-######################################################################################
-
-#------------------------------------------------------------------------------
-sub selectLanguage {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    installStepsCall($o, $auto, 'selectLanguage', $ent_number == 1);
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    require pkgs;
-    my ($first_time) = $ent_number == 1;
-
-    add2hash($o->{mouse} ||= {}, mouse::read($o->{prefix})) if $o->{isUpgrade} && $first_time;
-
-    installStepsCall($o, $auto, 'selectMouse', !$first_time || $clicked);
-
-    addToBeDone { mouse::write($o->{prefix}, $o->{mouse}) } 'installPackages';
-}
-
-#------------------------------------------------------------------------------
-sub setupSCSI {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    if (!$::live && !$::g_auto_install && !$o->{blank} && !$::testing) {
-	-s modules::cz_file() or die _("Can't access kernel modules corresponding to your kernel (file %s is missing)", modules::cz_file());
-    }
-
-    installStepsCall($o, $auto, 'setupSCSI', $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub selectKeyboard {
-    my ($clicked, $first_time, $auto) = ($_[0], $_[1] == 1, $_[2]);
-
-    if ($o->{isUpgrade} && $first_time && $o->{keyboard_unsafe}) {
-	my $keyboard = keyboard::read($o->{prefix});
-	$keyboard and $o->{keyboard} = $keyboard;
-    }
-    installStepsCall($o, $auto, 'selectKeyboard', $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub selectInstallClass {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    installStepsCall($o, $auto, 'selectInstallClass', $clicked);
-
-    if ($o->{steps}{choosePackages}{entered} >= 1 && !$o->{steps}{installPackages}{done}) {
-	installStepsCall($o, $auto, 'setPackages');
-	installStepsCall($o, $auto, 'selectPackagesToUpgrade') if $o->{isUpgrade};
-    }
-    if ($o->{isUpgrade}) {
-	@{$o->{orderedSteps}} = map { /setupSCSI/ ? ($_, "doPartitionDisks") : $_ }
-	                        grep { !/doPartitionDisks/ } @{$o->{orderedSteps}};
-	my $s; foreach (@{$o->{orderedSteps}}) {
-	    $s->{next} = $_ if $s;
-	    $s = $o->{steps}{$_};
-	}
-    }
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisks {
-    my ($clicked, $ent_number, $auto) = @_;
-    $o->{steps}{formatPartitions}{done} = 0;
-    installStepsCall($o, $auto, 'doPartitionDisksBefore');
-    installStepsCall($o, $auto, 'doPartitionDisks');
-    installStepsCall($o, $auto, 'doPartitionDisksAfter');
-}
-
-sub formatPartitions {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    $o->{steps}{choosePackages}{done} = 0;
-    installStepsCall($o, $auto, 'choosePartitionsToFormat', $o->{fstab}) if !$o->{isUpgrade};
-    installStepsCall($o, $auto, 'formatMountPartitions', $o->{fstab}) if !$::testing;
-
-    mkdir "$o->{prefix}/$_", 0755 foreach 
-      qw(dev etc etc/profile.d etc/rpm etc/sysconfig etc/sysconfig/console 
-	etc/sysconfig/network-scripts etc/sysconfig/console/consolefonts 
-	etc/sysconfig/console/consoletrans
-	home mnt tmp var var/tmp var/lib var/lib/rpm var/lib/urpmi);
-    mkdir "$o->{prefix}/$_", 0700 foreach qw(root root/tmp);
-
-    any::rotate_logs($o->{prefix});
-
-    require raid;
-    raid::prepare_prefixed($o->{all_hds}{raids}, $o->{prefix});
-}
-
-#------------------------------------------------------------------------------
-sub choosePackages {
-    my ($clicked, $ent_number, $auto) = @_;
-    require pkgs;
-
-    #- always setPackages as it may have to copy hdlist files and depslist file.
-    installStepsCall($o, $auto, 'setPackages');
-    installStepsCall($o, $auto, 'selectPackagesToUpgrade') if $o->{isUpgrade} && $ent_number == 1;
-
-    installStepsCall($o, $auto, 'choosePackages', $o->{packages}, $o->{compssUsers}, $ent_number == 1);
-    log::l("compssUsersChoice's: ", join(" ", grep { $o->{compssUsersChoice}{$_} } keys %{$o->{compssUsersChoice}}));
-
-    #- check pre-condition where base backage has to be selected.
-    pkgs::packageFlagSelected(pkgs::packageByName($o->{packages}, 'basesystem')) or die "basesystem package not selected";
-
-    #- check if there are package that need installation.
-    $o->{steps}{installPackages}{done} = 0 if $o->{steps}{installPackages}{done} && pkgs::packagesToInstall($o->{packages}) > 0;
-}
-
-#------------------------------------------------------------------------------
-sub installPackages {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    installStepsCall($o, $auto, 'readBootloaderConfigBeforeInstall') if $ent_number == 1;
-
-    installStepsCall($o, $auto, 'beforeInstallPackages');
-    installStepsCall($o, $auto, 'installPackages');
-    installStepsCall($o, $auto, 'afterInstallPackages');
-}
-#------------------------------------------------------------------------------
-sub miscellaneous {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    installStepsCall($o, $auto, 'miscellaneousBefore', $clicked);
-    installStepsCall($o, $auto, 'miscellaneous', $clicked);
-
-    addToBeDone {
-	setVarsInSh("$o->{prefix}/etc/sysconfig/system", { 
-            CLEAN_TMP => $o->{miscellaneous}{CLEAN_TMP},
-            CLASS => $::expert && 'expert' || 'beginner',
-            SECURITY => $o->{security},
-	    META_CLASS => $o->{meta_class} || 'PowerPack',
-        });
-	substInFile { s/KEYBOARD_AT_BOOT=.*/KEYBOARD_AT_BOOT=yes/ } "$o->{prefix}/etc/sysconfig/usb" if detect_devices::usbKeyboards();
-
-    } 'installPackages';
-}
-
-#------------------------------------------------------------------------------
-sub summary {
-    my ($clicked, $ent_number, $auto) = @_;
-    installStepsCall($o, $auto, 'summary', $ent_number == 1);
-}
-#------------------------------------------------------------------------------
-sub configureNetwork {
-    my ($clicked, $ent_number, $auto) = @_;
-    #- get current configuration of network device.
-    require network;
-    eval { network::read_all_conf($o->{prefix}, $o->{netc} ||= {}, $o->{intf} ||= {}) };
-    installStepsCall($o, $auto, 'configureNetwork', $ent_number == 1, $clicked);
-}
-#------------------------------------------------------------------------------
-sub installCrypto {
-    my ($clicked, $ent_number, $auto) = @_;
-    installStepsCall($o, $auto, 'installCrypto');
-}
-#------------------------------------------------------------------------------
-sub configureServices {
-    my ($clicked, $ent_number, $auto) = @_;
-    installStepsCall($o, $auto, 'configureServices', $clicked);
-}
-#------------------------------------------------------------------------------
-sub setRootPassword {
-    my ($clicked, $ent_number, $auto) = @_;
-    return if $o->{isUpgrade};
-
-    installStepsCall($o, $auto, 'setRootPassword', $clicked);
-    addToBeDone { install_any::setAuthentication($o) } 'installPackages';
-}
-#------------------------------------------------------------------------------
-sub addUser {
-    my ($clicked, $ent_number, $auto) = @_;
-    return if $o->{isUpgrade} && !$clicked;
-
-    installStepsCall($o, $auto, 'addUser', $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub createBootdisk {
-    my ($clicked, $ent_number, $auto) = @_;
-    modules::write_conf($o->{prefix});
-    installStepsCall($o, $auto, 'createBootdisk', $ent_number == 1, $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub setupBootloader {
-    my ($clicked, $ent_number, $auto) = @_;
-    return if $::g_auto_install;
-
-    modules::write_conf($o->{prefix});
-
-    installStepsCall($o, $auto, 'setupBootloaderBefore') if $ent_number == 1;
-    installStepsCall($o, $auto, 'setupBootloader', $ent_number-1 + $clicked*2); #- gore :-(
-
-    local $ENV{DRAKX_PASSWORD} = $o->{bootloader}{password};
-    local $ENV{DURING_INSTALL} = 1;
-    run_program::rooted($o->{prefix}, "/usr/sbin/msec", $o->{security});
-}
-#------------------------------------------------------------------------------
-sub configureX {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    #- done here and also at the end of install2.pm, just in case...
-    install_any::write_fstab($o);
-    modules::write_conf($o->{prefix});
-
-    require pkgs;
-    installStepsCall($o, $auto, 'configureX', $clicked) if pkgs::packageFlagInstalled(pkgs::packageByName($o->{packages}, 'XFree86')) && !$o->{X}{disabled} || $clicked || $::testing;
-}
-#------------------------------------------------------------------------------
-sub exitInstall {
-    my ($clicked, $ent_number, $auto) = @_;
-    installStepsCall($o, $auto, 'exitInstall', getNextStep() eq 'exitInstall');
-}
-
-
-#-######################################################################################
-#- MAIN
-#-######################################################################################
-sub main {
-    $SIG{__DIE__} = sub { chomp(my $err = $_[0]); log::l("warning: $err") };
-    $SIG{SEGV} = sub { 
-	my $msg = "segmentation fault: seems like memory is missing as the install crashes"; print "$msg\n"; log::l($msg);
-	$o->ask_warn('', $msg);
-	setVirtual(1);
-	require install_steps_auto_install;
-	install_steps_auto_install_non_interactive::errorInStep ();
-    };
-    $ENV{PERL_BADLANG} = 1;
-    umask 022;
-
-    $::isInstall = 1;
-    $::expert = $::g_auto_install = 0;
-
-#-    c::unlimit_core() unless $::testing;
-
-    my ($cfg, $patch, @auto);
-    my %cmdline; map { 
-	my ($n, $v) = split '=';
-	$cmdline{$n} = $v || 1;
-    } split ' ', cat_("/proc/cmdline");
-
-    my $opt; foreach (@_) {
-	if (/^--?(.*)/) {
-	    $cmdline{$opt} = 1 if $opt;
-	    $opt = $1;
-	} else {
-	    $cmdline{$opt} = $_ if $opt;
-	    $opt = '';
-	}
-    } $cmdline{$opt} = 1 if $opt;
-    
-    map_each {
-	my ($n, $v) = @_;
-	my $f = ${{
-	    oem       => sub { $::oem = $v },
-	    lang      => sub { $o->{lang} = $v },
-	    flang     => sub { $o->{lang} = $v ; push @auto, 'selectLanguage' },
-	    method    => sub { $o->{method} = $v },
-	    pcmcia    => sub { $o->{pcmcia} = $v },
-	    vga16     => sub { $o->{vga16} = $v },
-	    vga       => sub { $o->{vga} = $v },
-	    step      => sub { $o->{steps}{first} = $v },
-	    expert    => sub { $::expert = $v },
-	    fbeginner => sub { $::expert = 0; push @auto, 'selectInstallClass' },
-	    fexpert   => sub { $::expert = 1; push @auto, 'selectInstallClass' },
-	    desktop   => sub { $o->{meta_class} = 'desktop' },
-	    firewall  => sub { $o->{meta_class} = 'firewall'; push @auto, 'selectInstallClass'},
-	    lnx4win   => sub { $o->{lnx4win} = 1 },
-	    readonly  => sub { $o->{partitioning}{readonly} = $v ne "0" },
-	    display   => sub { $o->{display} = $v },
-	    security  => sub { $o->{security} = $v },
-	    live      => sub { $::live = 1 },
-	    noauto    => sub { $::noauto = 1 },
-	    test      => sub { $::testing = 1 },
-	    patch     => sub { $patch = 1 },
-	    defcfg    => sub { $cfg = $v },
-	    newt      => sub { $o->{interactive} = "newt" },
-	    text      => sub { $o->{interactive} = "newt" },
-	    stdio     => sub { $o->{interactive} = "stdio"},
-	    corporate => sub { $::corporate = 1 },
-	    kickstart => sub { $::auto_install = $v },
-	    auto_install => sub { $::auto_install = $v },
-	    simple_themes => sub { $o->{simple_themes} = 1 },
-	    useless_thing_accepted => sub { $o->{useless_thing_accepted} = 1 },
-	    alawindows => sub { $o->{security} = 0; $o->{partitioning}{clearall} = 1; $o->{bootloader}{crushMbr} = 1 },
-	    fdisk => sub { $o->{partitioning}{fdisk} = 1 },
-	    g_auto_install => sub { $::testing = $::g_auto_install = 1; $o->{partitioning}{auto_allocate} = 1 },
-	    nomouseprobe => sub { $o->{nomouseprobe} = $v },
-	    blank         => sub { $o->{blank} = 1},
-	    updatemodules => sub { $o->{updatemodules} = 1},
-	}}{lc $n}; &$f if $f;
-    } %cmdline;
-
-    if ($::testing) {
-	$ENV{SHARE_PATH} ||= "/export/Mandrake/mdkinst/usr/share";
-	$ENV{SHARE_PATH} = "/usr/share" if !-e $ENV{SHARE_PATH};
-    } else {
-	$ENV{SHARE_PATH} ||= "/usr/share";
-    }
-
-    undef $::auto_install if $cfg;
-    if ($::g_auto_install) {
-	(my $root = `/bin/pwd`) =~ s|(/[^/]*){5}$||;
-	symlinkf $root, "/tmp/image" or die "unable to create link /tmp/image";
-	$o->{method} ||= "cdrom";
-	$o->{mkbootdisk} = 0;
-    }
-    unless ($::testing || $::live) {
-	symlink "rhimage", "/tmp/image"; #- for compatibility with old stage1
-	unlink $_ foreach "/modules/modules.mar", "/sbin/stage1";
-    }
-
-    print STDERR "in second stage install\n";
-    log::openLog(($::testing || $o->{localInstall}) && 'debug.log');
-    log::l("second stage install running (", any::drakx_version(), ")");
-
-    $o->{prefix} = $::testing ? "/tmp/test-perl-install" : $::live ? "" : "/mnt";
-    $o->{root}   = $::testing ? "/tmp/root-perl-install" : "/";
-    $o->{isUpgrade} = 1 if $::live;
-    mkdir $o->{prefix}, 0755;
-    mkdir $o->{root}, 0755;
-    devices::make("/dev/zero"); #- needed by ddcxinfos
-
-    #-  make sure we don't pick up any gunk from the outside world
-    my $remote_path = "$o->{prefix}/sbin:$o->{prefix}/bin:$o->{prefix}/usr/sbin:$o->{prefix}/usr/bin:$o->{prefix}/usr/X11R6/bin";
-    $ENV{PATH} = "/usr/bin:/bin:/sbin:/usr/sbin:/usr/X11R6/bin:$remote_path" unless $::g_auto_install;
-
-    eval { spawnShell() };
-
-    $o->{prefix} = $::testing ? "/tmp/test-perl-install" : $::live ? "" : "/mnt";
-    mkdir $o->{prefix}, 0755;
-
-    modules::load_deps(($::testing ? ".." : "") . "/modules/modules.dep");
-    modules::read_stage1_conf($_) foreach "/tmp/conf.modules", "/etc/modules.conf";
-    modules::read_already_loaded();
-
-    #- done after module dependencies are loaded for "vfat depends on fat"
-    if ($::auto_install) {
-	require install_steps_auto_install;
-	eval { $o = $::o = install_any::loadO($o, $::auto_install) };
-	if ($@) {
-	    if ($o->{useless_thing_accepted}) { #- Pixel's hack to be able to fail through
-		log::l("error using auto_install, continuing");
-		undef $::auto_install;
-	    } else {
-		print "Error using auto_install\n$@\n";
-		install_steps_auto_install_non_interactive::errorInStep ();
-	    }
-	} else {
-	    log::l("auto install config file loaded successfully");
-	}
-    }
-    $o->{interactive} ||= 'gtk' if !$::auto_install;
- 
-    if ($o->{interactive} eq "gtk" && availableMemory < 22 * 1024) {
- 	log::l("switching to newt install cuz not enough memory");
- 	$o->{interactive} = "newt";
-    }
-    require"install_steps_$o->{interactive}.pm" if $o->{interactive}; #- no space to skip perl2fcalls
-
-    # needed before accessing floppy (in case of usb floppy)
-    $::noauto or modules::load_thiskind("usb"); 
- 
-    eval { $o = $::o = install_any::loadO($o, "patch") } if $patch;
-    eval { $o = $::o = install_any::loadO($o, $cfg) } if $cfg;
-
-    eval { modules::load("af_packet") };
-
-    map_index {
-	modules::add_alias("sound-slot-$::i", $_->{driver});
-    } modules::get_that_type('sound');
-
-    #- needed very early for install_steps_gtk
-    eval { ($o->{mouse}, @{$o->{wacom} = []}) = mouse::detect() } unless $o->{nomouseprobe} || $o->{mouse};
-
-    $o->{lang} = lang::set($o->{lang}); #- mainly for defcfg
-
-    $o->{allowFB} = listlength(cat_("/proc/fb"));
-
-    my $VERSION = cat__(install_any::getFile("VERSION")) or do { print "VERSION file missing\n"; sleep 5 };
-    $o->{lnx4win} = 1 if $VERSION =~ /lnx4win/i;
-    $o->{meta_class} = 'desktop' if $VERSION =~ /desktop/i;
-    $o->{meta_class} = 'firewall' if $VERSION =~ /firewall/i;
-    $o->{meta_class} = 'server' if $VERSION =~ /server/i;
-    if ($::oem) {
-	$o->{partitioning}{use_existing_root} = 1;
-	$o->{partitioning}{auto_allocate} = 1;
-	$o->{compssListLevel} = 4;
-	push @auto, 'selectInstallClass', 'doPartitionDisks', 'choosePackages', 'configureTimezone', 'exitInstall';
-    }
-
-    foreach (@auto) {
-	my $s = $o->{steps}{/::(.*)/ ? $1 : $_} or next;
-	$s->{auto} = $s->{hidden} = 1;
-    }
-
-    my $o_;
-    while (1) {
-    	$o_ = $::auto_install ?
-    	  install_steps_auto_install->new($o) :
-    	    $o->{interactive} eq "stdio" ?
-    	  install_steps_stdio->new($o) :
-    	    $o->{interactive} eq "newt" ?
-    	  install_steps_newt->new($o) :
-    	    $o->{interactive} eq "gtk" ?
-    	  install_steps_gtk->new($o) :
-    	    die "unknown install type";
-	$o_ and last;
-
-	$o->{interactive} = "newt";
-	require install_steps_newt;
-    }
-    $::o = $o = $o_;
-
-    if (-e '/tmp/network') {
-	require network;
-	#- get stage1 network configuration if any.
-	log::l('found /tmp/network');
-	$o->{netc} ||= network::read_conf('/tmp/network');
-	if (my ($file) = glob_('/tmp/ifcfg-*')) {
-	    log::l("found network config file $file");
-	    my $l = network::read_interface_conf($file);
-	    $o->{intf} ||= { $l->{DEVICE} => $l };
-	}
-	if (-e '/etc/resolv.conf') {
-	    my $file ='/etc/resolv.conf';
-	    log::l("found network config file $file");
-	    add2hash($o->{netc}, network::read_resolv_conf($file));
-	}
-    }
-    install_any::remove_unused() if common::usingRamdisk();
-
-    #-the main cycle
-    my $clicked = 0;
-    MAIN: for ($o->{step} = $o->{steps}{first};; $o->{step} = getNextStep()) {
-	$o->{steps}{$o->{step}}{entered}++;
-	$o->enteringStep($o->{step});
-	if ($o->{steps}{$o->{step}}{icon}) { $o->{icon} = $o->{steps}{$o->{step}}{icon} } else { undef $o->{icon} }
-	eval {
-	    &{$install2::{$o->{step}}}($clicked || $o->{steps}{$o->{step}}{noauto},
-				       $o->{steps}{$o->{step}}{entered},
-				       $clicked ? 0 : $o->{steps}{$o->{step}}{auto});
-	};
-	my $err = $@;
-	$o->kill_action;
-	$clicked = 0;
-	if ($err) {
-	    local $_ = $err;
-	    $o->kill_action;
-	    if (/^setstep (.*)/) {
-		$o->{step} = $1;
-		$o->{steps}{$1}{done} = 0;
-		$clicked = 1;
-		redo MAIN;
-	    }
-	    /^theme_changed$/ and redo MAIN;
-	    unless (/^already displayed/) {
-		eval { $o->errorInStep($_) };
-		$o->{steps}{$o->{step}}{auto} = 0;
-		$err = $@;
-		$err and next;
-	    }
-	    $o->{step} = $o->{steps}{$o->{step}}{onError};
-	    next MAIN unless $o->{steps}{$o->{step}}{reachable}; #- sanity check: avoid a step not reachable on error.
-	    redo MAIN;
-	}
-	$o->{steps}{$o->{step}}{done} = 1;
-	$o->leavingStep($o->{step});
-
-	last if $o->{step} eq 'exitInstall';
-    }
-    install_any::clean_postinstall_rpms();
-    install_any::log_sizes($o);
-    install_any::remove_advertising($o);
-    install_any::write_fstab($o);
-    modules::write_conf($o->{prefix});
-
-    #- mainly for auto_install's
-    run_program::run("bash", "-c", $o->{postInstallNonRooted}) if $o->{postInstallNonRooted};
-    run_program::rooted($o->{prefix}, "sh", "-c", $o->{postInstall}) if $o->{postInstall};
-
-    install_any::ejectCdrom();
-
-    #- to ensure linuxconf doesn't cry against those files being in the future
-    foreach ('/etc/modules.conf', '/etc/crontab', '/etc/sysconfig/mouse', '/etc/sysconfig/network', '/etc/X11/fs/config') {
-	my $now = time - 24 * 60 * 60;
-	utime $now, $now, "$o->{prefix}/$_";
-    }
-    $::live or install_any::killCardServices();
-
-    #- make sure failed upgrade will not hurt too much.
-    install_steps::cleanIfFailedUpgrade($o);
-
-    -e "$o->{prefix}/usr/sbin/urpmi.update" or eval { rm_rf("$o->{prefix}/var/lib/urpmi") };
-
-    #- have the really bleeding edge ddebug.log
-    eval { cp_af("/tmp/ddebug.log", "$o->{prefix}/root") };
-
-    #- ala pixel? :-) [fpons]
-    common::sync(); common::sync();
-
-    log::l("installation complete, leaving");
-    log::l("files still open by install2: ", readlink($_)) foreach glob_("/proc/self/fd/*");
-    print "\n" x 80;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/install_any.pm b/perl-install/install_any.pm
deleted file mode 100644
index 00a4e4f34..000000000
--- a/perl-install/install_any.pm
+++ /dev/null
@@ -1,1138 +0,0 @@
-package install_any; # $Id$
-
-use diagnostics;
-use strict;
-
-use vars qw(@ISA %EXPORT_TAGS @EXPORT_OK @needToCopy @needToCopyIfRequiresSatisfied $boot_medium @advertising_images);
-
-@ISA = qw(Exporter);
-%EXPORT_TAGS = (
-    all => [ qw(getNextStep spawnShell addToBeDone) ],
-);
-@EXPORT_OK = map { @$_ } values %EXPORT_TAGS;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::System;
-use common;
-use run_program;
-use partition_table qw(:types);
-use partition_table_raw;
-use devices;
-use fsedit;
-use modules;
-use detect_devices;
-use lang;
-use any;
-use log;
-use fs;
-
-#- package that have to be copied for proper installation (just to avoid changing cdrom)
-#- here XFree86 is copied entirey if not already installed, maybe better to copy only server.
-#- considered obsoletes :
-#- XFree86-8514 XFree86-AGX XFree86-Mach32 XFree86-Mach8 XFree86-Mono XFree86-P9000 
-#- XFree86-W32 XFree86-I128 XFree86-VGA16 XFree86-3DLabs 
-@needToCopy = qw(
-XFree86-Mach64 XFree86-S3 XFree86-S3V XFree86-SVGA 
-XFree86-Sun XFree86-SunMono XFree86-Sun24 XFree86-FBDev XFree86-server
-XFree86 XFree86-glide-module Device3Dfx Glide_V3-DRI Glide_V5 Mesa
-dhcpcd pump dhcpxd dhcp-client isdn-light isdn4net isdn4k-utils dev pptp-adsl rp-pppoe ppp ypbind
-autologin
-foomatic printer-utils printer-testpages gimpprint rlpr samba-client ncpfs nc
-cups xpp qtcups kups cups-drivers lpr LPRng pdq ImageMagick
-);
-#- package that have to be copied only if all their requires are satisfied.
-@needToCopyIfRequiresSatisfied = qw(
-Mesa-common
-);
-
-#- boot medium (the first medium to take into account).
-$boot_medium = 1;
-
-#-######################################################################################
-#- Media change variables&functions
-#-######################################################################################
-my $postinstall_rpms = '';
-my $current_medium = $boot_medium;
-my $asked_medium = $boot_medium;
-my $cdrom = undef;
-sub useMedium($) {
-    #- before ejecting the first CD, there are some files to copy!
-    #- does nothing if the function has already been called.
-    $_[0] > 1 and $::o->{method} eq 'cdrom' and setup_postinstall_rpms($::o->{prefix}, $::o->{packages});
-
-    $asked_medium eq $_[0] or log::l("selecting new medium '$_[0]'");
-    $asked_medium = $_[0];
-}
-sub changeMedium($$) {
-    my ($method, $medium) = @_;
-    log::l("change to medium $medium for method $method (refused by default)");
-    0;
-}
-sub relGetFile($) {
-    local $_ = $_[0];
-    m|\.rpm$| ? "$::o->{packages}{mediums}{$asked_medium}{rpmsdir}/$_" : $_;
-}
-sub askChangeMedium($$) {
-    my ($method, $medium) = @_;
-    my $allow;
-    do {
-	eval { $allow = changeMedium($method, $medium) };
-    } while ($@); #- really it is not allowed to die in changeMedium!!! or install will cores with rpmlib!!!
-    log::l($allow ? "accepting medium $medium" : "refusing medium $medium");
-    $allow;
-}
-sub errorOpeningFile($) {
-    my ($file) = @_;
-    $file eq 'XXX' and return; #- special case to force closing file after rpmlib transaction.
-    $current_medium eq $asked_medium and log::l("errorOpeningFile $file"), return; #- nothing to do in such case.
-    $::o->{packages}{mediums}{$asked_medium}{selected} or return; #- not selected means no need for worying about.
-
-    my $max = 32; #- always refuse after $max tries.
-    if ($::o->{method} eq "cdrom") {
-	cat_("/proc/mounts") =~ m,(/(?:dev|tmp)/\S+)\s+(?:/mnt/cdrom|/tmp/image), and $cdrom = $1;
-	return unless $cdrom;
-	ejectCdrom($cdrom);
-	while ($max > 0 && askChangeMedium($::o->{method}, $asked_medium)) {
-	    $current_medium = $asked_medium;
-	    eval { fs::mount($cdrom, "/tmp/image", "iso9660", 'readonly') };
-	    my $getFile = getFile($file); 
-	    $getFile && @advertising_images and copy_advertising($::o);
-	    $getFile and return $getFile;
-	    $current_medium = 'unknown'; #- don't know what CD is inserted now.
-	    ejectCdrom($cdrom);
-	    --$max;
-	}
-    } else {
-	while ($max > 0 && askChangeMedium($::o->{method}, $asked_medium)) {
-	    $current_medium = $asked_medium;
-	    my $getFile = getFile($file); $getFile and return $getFile;
-	    $current_medium = 'unknown'; #- don't know what CD image has been copied.
-	    --$max;
-	}
-    }
-
-    #- keep in mind the asked medium has been refused on this way.
-    #- this means it is no more selected.
-    $::o->{packages}{mediums}{$asked_medium}{selected} = undef;
-
-    #- on cancel, we can expect the current medium to be undefined too,
-    #- this enable remounting if selecting a package back.
-    $current_medium = 'unknown';
-
-    return;
-}
-sub getFile {
-    my ($f, $method) = @_;
-    log::l("getFile $f:$method");
-    my $rel = relGetFile($f);
-    do {
-	if ($method =~ /crypto/i) {
-	    require crypto;
-	    crypto::getFile($f);
-	} elsif ($::o->{method} eq "ftp") {
-	    require ftp;
-	    ftp::getFile($rel);
-	} elsif ($::o->{method} eq "http") {
-	    require http;
-	    http::getFile($rel);
-	} else {
-	    #- try to open the file, but examine if it is present in the repository, this allow
-	    #- handling changing a media when some of the file on the first CD has been copied
-	    #- to other to avoid media change...
-	    my $f2 = "$postinstall_rpms/$f";
-	    $f2 = "/tmp/image/$rel" unless $postinstall_rpms && -e $f2;
-	    open GETFILE, $f2 and *GETFILE;
-	}
-    } || errorOpeningFile($f);
-}
-sub getAndSaveFile {
-    my ($file, $local) = @_ == 1 ? ("Mandrake/mdkinst$_[0]", $_[0]) : @_;
-    local *F; open F, ">$local" or return;
-    local $/ = \ (16 * 1024);
-    my $f = ref($file) ? $file : getFile($file) or return;
-    local $_;
-    while (<$f>) { syswrite F, $_ }
-    1;
-}
-
-
-#-######################################################################################
-#- Post installation RPMS from cdrom only, functions
-#-######################################################################################
-sub setup_postinstall_rpms($$) {
-    my ($prefix, $packages) = @_;
-
-    $postinstall_rpms and return;
-    $postinstall_rpms = "$prefix/usr/postinstall-rpm";
-
-    require pkgs;
-
-    log::l("postinstall rpms directory set to $postinstall_rpms");
-    clean_postinstall_rpms(); #- make sure in case of previous upgrade problem.
-    mkdir_p($postinstall_rpms);
-
-    #- compute closure of unselected package that may be copied,
-    #- don't complain if package does not exists as it may happen
-    #- for the various architecture taken into account (X servers).
-    my %toCopy;
-    foreach (@needToCopy) {
-	my $pkg = pkgs::packageByName($packages, $_);
-	pkgs::selectPackage($packages, $pkg, 0, \%toCopy) if $pkg;
-    }
-    @toCopy{@needToCopyIfRequiresSatisfied} = ();
-
-    my @toCopy = map { pkgs::packageByName($packages, $_) } keys %toCopy;
-
-    #- extract headers of package, this is necessary for getting
-    #- the complete filename of each package.
-    #- copy the package files in the postinstall RPMS directory.
-    #- last arg is default medium '' known as the CD#1.
-    pkgs::extractHeaders($prefix, \@toCopy, $packages->{mediums}{$boot_medium});
-    cp_af((map { "/tmp/image/" . relGetFile(pkgs::packageFile($_)) } @toCopy), $postinstall_rpms);
-
-    log::l("copying Auto Install Floppy");
-    getAndSaveInstallFloppy($::o, "$postinstall_rpms/auto_install.img");
-}
-
-sub clean_postinstall_rpms() {
-    $postinstall_rpms and -d $postinstall_rpms and rm_rf($postinstall_rpms);
-}
-
-
-#-######################################################################################
-#- Specific Hardware to take into account and associated rpms to install
-#-######################################################################################
-sub allowNVIDIA_rpms {
-    my ($packages) = @_;
-    require pkgs;
-    if (pkgs::packageByName($packages, "NVIDIA_GLX")) {
-	#- at this point, we can allow using NVIDIA 3D acceleration packages.
-	my @rpms;
-	foreach (qw(kernel kernel-smp kernel-entreprise kernel22 kernel22-smp kernel22-secure)) {
-	    my $p = pkgs::packageByName($packages, $_);
-	    pkgs::packageSelectedOrInstalled($p) or next;
-	    my $name = "NVIDIA_kernel-" . pkgs::packageVersion($p) . "-" . pkgs::packageRelease($p) . (/(-.*)/ && $1);
-	    pkgs::packageByName($packages, $name) or return;
-	    push @rpms, $name;
-	}
-	@rpms > 0 or return;
-	return [ @rpms, "NVIDIA_GLX" ];
-    }
-}
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub kernelVersion {
-    my ($o) = @_;
-    require pkgs;
-    my $p = pkgs::packageByName($o->{packages}, "kernel");
-    $p  ||= pkgs::packageByName($o->{packages}, "kernel22");
-    $p or die "I couldn't find the kernel package!";
-    pkgs::packageVersion($p) . "-" . pkgs::packageRelease($p);
-}
-
-
-sub getNextStep {
-    my ($s) = $::o->{steps}{first};
-    $s = $::o->{steps}{$s}{next} while $::o->{steps}{$s}{done} || !$::o->{steps}{$s}{reachable};
-    $s;
-}
-
-sub spawnShell {
-    return if $::o->{localInstall} || $::testing;
-
-    -x "/bin/sh" or die "cannot open shell - /bin/sh doesn't exist";
-
-    fork and return;
-
-    $ENV{DISPLAY} ||= ":0"; #- why not :pp
-
-    local *F;
-    sysopen F, "/dev/tty2", 2 or die "cannot open /dev/tty2 -- no shell will be provided";
-
-    open STDIN, "<&F" or die '';
-    open STDOUT, ">&F" or die '';
-    open STDERR, ">&F" or die '';
-    close F;
-
-    print any::drakx_version(), "\n";
-
-    c::setsid();
-
-    ioctl(STDIN, c::TIOCSCTTY(), 0) or warn "could not set new controlling tty: $!";
-
-    my $busybox = "/usr/bin/busybox";
-    exec {-e $busybox ? $busybox : "/bin/sh"} "/bin/sh" or log::l("exec of /bin/sh failed: $!");
-}
-
-sub fsck_option {
-    my ($o) = @_;
-    my $y = $o->{security} < 3 && !$::expert && "-y ";
-    substInFile { s/^(\s*fsckoptions="?)(-y )?/$1$y/ } "$o->{prefix}/etc/rc.d/rc.sysinit"; #- " help po, DONT REMOVE
-}
-
-sub getAvailableSpace {
-    my ($o) = @_;
-
-    #- make sure of this place to be available for installation, this could help a lot.
-    #- currently doing a very small install use 36Mb of postinstall-rpm, but installing
-    #- these packages may eat up to 90Mb (of course not all the server may be installed!).
-    #- 65mb may be a good choice to avoid almost all problem of insuficient space left...
-    my $minAvailableSize = 65 * sqr(1024);
-
-    my $n = !$::testing && getAvailableSpace_mounted($o->{prefix}) || 
-            getAvailableSpace_raw($o->{fstab}) * 512 / 1.07;
-    $n - max(0.1 * $n, $minAvailableSize);
-}
-
-sub getAvailableSpace_mounted {
-    my ($prefix) = @_;
-    my $dir = -d "$prefix/usr" ? "$prefix/usr" : "$prefix";
-    my (undef, $free) = MDK::Common::System::df($dir) or return;
-    log::l("getAvailableSpace_mounted $free KB");
-    $free * 1024 || 1;
-}
-sub getAvailableSpace_raw {
-    my ($fstab) = @_;
-
-    do { $_->{mntpoint} eq '/usr' and return $_->{size} } foreach @$fstab;
-    do { $_->{mntpoint} eq '/'    and return $_->{size} } foreach @$fstab;
-
-    if ($::testing) {
-	my $nb = 450;
-	log::l("taking ${nb}MB for testing");
-	return $nb << 11;
-    }
-    die "missing root partition";
-}
-
-sub preConfigureTimezone {
-    my ($o) = @_;
-    require timezone;
-   
-    #- can't be done in install cuz' timeconfig %post creates funny things
-    add2hash($o->{timezone}, { timezone::read($o->{prefix}) }) if $o->{isUpgrade};
-
-    $o->{timezone}{timezone} ||= timezone::bestTimezone(lang::lang2text($o->{lang}));
-
-    my $utc = $::expert && !grep { isFat($_) || isNT($_) } @{$o->{fstab}};
-    my $ntp = timezone::ntp_server($o->{prefix});
-    add2hash_($o->{timezone}, { UTC => $utc, ntp => $ntp });
-}
-
-sub setPackages {
-    my ($o) = @_;
-
-    require pkgs;
-    if (!$o->{packages} || is_empty_hash_ref($o->{packages}{names})) {
-	$o->{packages} = pkgs::psUsingHdlists($o->{prefix}, $o->{method});
-
-	push @{$o->{default_packages}}, "nfs-utils-clients" if $o->{method} eq "nfs";
-	push @{$o->{default_packages}}, "numlock" if $o->{miscellaneous}{numlock};
-	push @{$o->{default_packages}}, "kernel-enterprise" if !$::oem && (availableRamMB() > 800) && (arch() !~ /ia64/);
-	push @{$o->{default_packages}}, "kernel22" if !$::oem && c::kernel_version() =~ /^\Q2.2/;
-	push @{$o->{default_packages}}, "kernel-smp" if detect_devices::hasSMP();
-	push @{$o->{default_packages}}, "kernel-pcmcia-cs" if $o->{pcmcia};
-	push @{$o->{default_packages}}, "raidtools" if !is_empty_array_ref($o->{all_hds}{raids});
-	push @{$o->{default_packages}}, "lvm" if !is_empty_array_ref($o->{all_hds}{lvms});
-	push @{$o->{default_packages}}, "usbd", "hotplug" if modules::get_alias("usb-interface");
-	push @{$o->{default_packages}}, "reiserfsprogs" if grep { isThisFs("reiserfs", $_) } @{$o->{fstab}};
-	push @{$o->{default_packages}}, "xfsprogs" if grep { isThisFs("xfs", $_) } @{$o->{fstab}};
-	push @{$o->{default_packages}}, "jfsprogs" if grep { isThisFs("jfs", $_) } @{$o->{fstab}};
-	push @{$o->{default_packages}}, "alsa", "alsa-utils" if modules::get_alias("sound-slot-0") =~ /^snd-card-/;
-	push @{$o->{default_packages}}, "imwheel" if $o->{mouse}{nbuttons} > 3;
-
-	pkgs::getDeps($o->{prefix}, $o->{packages});
-	pkgs::selectPackage($o->{packages},
-			    pkgs::packageByName($o->{packages}, 'basesystem') || die("missing basesystem package"), 1);
-
-	#- must be done after selecting base packages (to save memory)
-	pkgs::getProvides($o->{packages});
-
-	#- must be done after getProvides
-	pkgs::read_rpmsrate($o->{packages}, getFile("Mandrake/base/rpmsrate"));
-	($o->{compssUsers}, $o->{compssUsersSorted}) = pkgs::readCompssUsers($o->{meta_class});
-
-	if ($::auto_install && $o->{compssUsersChoice}{ALL}) {
-	    $o->{compssUsersChoice}{$_} = 1 foreach map { @{$o->{compssUsers}{$_}{flags}} } @{$o->{compssUsersSorted}};
-	}
-	if (!$o->{compssUsersChoice} && !$o->{isUpgrade}) {
-	    #- by default, choose:
-	    $o->{compssUsersChoice}{$_} = 1 foreach 'GNOME', 'KDE', 'CONFIG', 'X';
-	    $o->{compssUsersChoice}{$_} = 1 
-	      foreach map { @{$o->{compssUsers}{$_}{flags}} } 'Workstation|Office Workstation', 'Workstation|Internet station';
-	}
-	$o->{compssUsersChoice}{uc($_)} = 1 foreach grep { modules::get_that_type($_) } ('tv', 'scanner', 'photo', 'sound');
-	$o->{compssUsersChoice}{uc($_)} = 1 foreach map { $_->{driver} =~ /Flag:(.*)/ } detect_devices::probeall();
-	$o->{compssUsersChoice}{SYSTEM} = 1;
-	$o->{compssUsersChoice}{BURNER} = 1 if detect_devices::burners();
-	$o->{compssUsersChoice}{DVD} = 1 if detect_devices::dvdroms();
-	$o->{compssUsersChoice}{PCMCIA} = 1 if detect_devices::hasPCMCIA();
-	$o->{compssUsersChoice}{HIGH_SECURITY} = 1 if $o->{security} > 3;
-	$o->{compssUsersChoice}{'3D'} = 1 if 
-	    detect_devices::matching_desc('Matrox.* G[245][05]0') ||
-	    detect_devices::matching_desc('Riva.*128') ||
-	    detect_devices::matching_desc('Rage X[CL]') ||
-	    detect_devices::matching_desc('Rage Mobility [PL]') ||
-	    detect_devices::matching_desc('3D Rage (?:LT|Pro)') ||
-	    detect_devices::matching_desc('Voodoo [35]') ||
-	    detect_devices::matching_desc('Voodoo Banshee') ||
-	    detect_devices::matching_desc('8281[05].* CGC') ||
-	    detect_devices::matching_desc('Rage 128') ||
-	    detect_devices::matching_desc('Radeon ') ||
-	    detect_devices::matching_desc('[nN]Vidia.*T[nN]T2') || #- TNT2 cards
-	    detect_devices::matching_desc('[nN]Vidia.*NV[56]') ||
-	    detect_devices::matching_desc('[nN]Vidia.*Vanta') ||
-	    detect_devices::matching_desc('[nN]Vidia.*GeForce') || #- GeForce cards
-	    detect_devices::matching_desc('[nN]Vidia.*NV1[15]') ||
-	    detect_devices::matching_desc('[nN]Vidia.*Quadro');
-
-
-	foreach (map { substr($_, 0, 2) } lang::langs($o->{langs})) {
-	    pkgs::packageByName($o->{packages}, "locales-$_") or next;
-	    push @{$o->{default_packages}}, "locales-$_";
-	    $o->{compssUsersChoice}{qq(LOCALES"$_")} = 1; #- mainly for zh in case of zh_TW.Big5
-	}
-	foreach (lang::langsLANGUAGE($o->{langs})) {
-	    $o->{compssUsersChoice}{qq(LOCALES"$_")} = 1;
-	}
-	$o->{compssUsersChoice}{'CHARSET"' . lang::lang2charset($o->{lang}) . '"'} = 1;
-    } else {
-	#- this has to be done to make sure necessary files for urpmi are
-	#- present.
-	pkgs::psUpdateHdlistsDeps($o->{prefix}, $o->{method});
-    }
-}
-
-sub unselectMostPackages {
-    my ($o) = @_;
-    pkgs::unselectAllPackages($o->{packages});
-    pkgs::selectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_) || next) foreach @{$o->{default_packages}};
-}
-
-sub warnAboutNaughtyServers {
-    my ($o) = @_;
-    my @naughtyServers = pkgs::naughtyServers($o->{packages}) or return 1;
-    if (!$o->ask_yesorno('', 
-formatAlaTeX(_("You have selected the following server(s): %s
-
-
-These servers are activated by default. They don't have any known security
-issues, but some new could be found. In that case, you must make sure to upgrade
-as soon as possible.
-
-
-Do you really want to install these servers?
-", join(", ", @naughtyServers))), 1)) {
-	pkgs::unselectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_)) foreach @naughtyServers;
-    }
-}
-
-sub addToBeDone(&$) {
-    my ($f, $step) = @_;
-
-    return &$f() if $::o->{steps}{$step}{done};
-
-    push @{$::o->{steps}{$step}{toBeDone}}, $f;
-}
-
-sub setAuthentication {
-    my ($o) = @_;
-    my ($shadow, $md5, $ldap, $nis) = @{$o->{authentication} || {}}{qw(shadow md5 LDAP NIS)};
-    my $p = $o->{prefix};
-    #- obsoleted always enabled (in /etc/pam.d/system-auth furthermore) #any::enableMD5Shadow($p, $shadow, $md5);
-    any::enableShadow($p) if $shadow;
-    if ($ldap) {
-	$o->pkg_install(qw(chkauth openldap-clients nss_ldap pam_ldap));
-	run_program::rooted($o->{prefix}, "/usr/sbin/chkauth", "ldap", "-D", $o->{netc}{LDAPDOMAIN}, "-s", $ldap);
-    } elsif ($nis) {
-	#$o->pkg_install(qw(chkauth ypbind yp-tools net-tools));
-	#run_program::rooted($o->{prefix}, "/usr/sbin/chkauth", "yp", $domain, "-s", $nis);
-	$o->pkg_install("ypbind");
-	my $domain = $o->{netc}{NISDOMAIN};
-	$domain || $nis ne "broadcast" or die _("Can't use broadcast with no NIS domain");
-	my $t = $domain ? "domain $domain" . ($nis ne "broadcast" && " server")
-	                : "ypserver";
-	substInFile {
-	    $_ = "#~$_" unless /^#/;
-	    $_ .= "$t $nis\n" if eof;
-	} "$p/etc/yp.conf";
-	require network;
-	network::write_conf("$p/etc/sysconfig/network", $o->{netc});
-    }
-}
-
-sub killCardServices {
-    my $pid = chomp_(cat_("/tmp/cardmgr.pid"));
-    $pid and kill(15, $pid); #- send SIGTERM
-}
-
-sub unlockCdrom(;$) {
-    my ($cdrom) = @_;
-    $cdrom or cat_("/proc/mounts") =~ m,(/(?:dev|tmp)/\S+)\s+(?:/mnt/cdrom|/tmp/image), and $cdrom = $1;
-    eval { $cdrom and ioctl detect_devices::tryOpen($1), c::CDROM_LOCKDOOR(), 0 };
-}
-sub ejectCdrom(;$) {
-    my ($cdrom) = @_;
-    getFile("XXX"); #- close still opened filehandle
-    $cdrom ||= $1 if cat_("/proc/mounts") =~ m,(/(?:dev|tmp)/\S+)\s+(?:/mnt/cdrom|/tmp/image),;
-    if ($cdrom) {
-	#- umount BEFORE opening the cdrom device otherwise the umount will
-	#- D state if the cdrom is already removed
-	eval { fs::umount("/tmp/image") };
-	eval { ioctl detect_devices::tryOpen($cdrom), c::CDROMEJECT(), 1 };	
-    }
-}
-
-sub setupFB {
-    my ($o, $vga) = @_;
-
-    $vga ||= 785; #- assume at least 640x480x16.
-
-    require bootloader;
-    #- update bootloader entries with vga, all kernel are now framebuffer.
-    foreach (qw(vmlinuz vmlinuz-secure vmlinuz-smp vmlinuz-hack)) {
-	if (my $e = bootloader::get("/boot/$_", $o->{bootloader})) {
-	    $e->{vga} = $vga;
-	}
-    }
-    bootloader::install($o->{prefix}, $o->{bootloader}, $o->{fstab}, $o->{all_hds}{hds});
-    1;
-}
-
-sub hdInstallPath() {
-    my $tail = first(readlink("/tmp/image") =~ m|^/tmp/hdimage/(.*)|);
-    my $head = first(readlink("/tmp/hdimage") =~ m|$::o->{prefix}(.*)|);
-    $tail && ($head ? "$head/$tail" : "/mnt/hd/$tail");
-}
-
-sub install_urpmi {
-    my ($prefix, $method, $mediums) = @_;
-
-    #- rare case where urpmi cannot be installed (no hd install path).
-    $method eq 'disk' && !hdInstallPath() and return;
-
-    my @cfg = map_index {
-	my $name = $_->{fakemedium};
-
-	#- build synthesis file at install, this will improve performance greatly.
-	run_program::rooted($prefix, "parsehdlist", ">", "/var/lib/urpmi/synthesis.hdlist.$name",
-			    "--compact", "--provides", "--requires", "/var/lib/urpmi/hdlist.$name.cz");
-	run_program::rooted($prefix, "gzip", "-S", ".cz", "/var/lib/urpmi/synthesis.hdlist.$name");
-	#- safe guard correct generation of synthesis file.
-	-s "$prefix/var/lib/urpmi/synthesis.hdlist.$name.cz" > 24 or unlink "$prefix/var/lib/urpmi/synthesis.hdlist.$name.cz";
-
-	local *LIST;
-	my $mask = umask 077;
-	open LIST, ">$prefix/var/lib/urpmi/list.$name" or log::l("failed to write list.$name");
-	umask $mask;
-
-	my $dir = ${{ nfs => "file://mnt/nfs", 
-                      disk => "file:/" . hdInstallPath(),
-		      ftp => $ENV{URLPREFIX},
-		      http => $ENV{URLPREFIX},
-		      cdrom => "removable_cdrom://mnt/cdrom" }}{$method} . "/$_->{rpmsdir}";
-
-	local *FILES; open FILES, "$ENV{LD_LOADER} parsehdlist /tmp/$_->{hdlist} |";
-	print LIST "$dir/$_\n" foreach chomp_(<FILES>);
-	close FILES or log::l("parsehdlist failed"), return;
-	close LIST;
-
-	my ($qname, $qdir) = ($name, $dir);
-	$qname =~ s/(\s)/\\$1/g; $qdir =~ s/(\s)/\\$1/g;
-
-	#- output new urpmi.cfg format here.
-	"$qname " . ($dir !~ /^(ftp|http)/ && $qdir) . " {
-  hdlist: hdlist.$name.cz
-  with_hdlist: ../base/$_->{hdlist}
-  list: list.$name" . ($dir =~ /removable_([^\s:_]*)/ && "
-  removable: /dev/$1") . "
-}
-
-";
-    } values %$mediums;
-    eval { output "$prefix/etc/urpmi/urpmi.cfg", @cfg };
-}
-
-
-#-###############################################################################
-#- kde stuff
-#-###############################################################################
-sub kderc_largedisplay {
-    my ($prefix) = @_;
-
-    update_gnomekderc($_, 'KDE', 
-		     Contrast => 7,
-		     kfmIconStyle => "Large",
-		     kpanelIconStyle => "Normal", #- to change to Large when icons looks better
-		     KDEIconStyle => "Large") foreach list_skels($prefix, '.kderc');
-
-    substInFile {
-	s/^(GridWidth)=85/$1=100/;
-	s/^(GridHeight)=70/$1=75/;
-    } $_ foreach list_skels($prefix, '.kde/share/config/kfmrc');
-}
-
-sub kdeicons_postinstall {
-    my ($prefix) = @_;
-
-    #- parse etc/fstab file to search for dos/win, floppy, zip, cdroms icons.
-    #- handle both supermount and fsdev usage.
-    my %l = (
-	     'cdrom' => [ 'cdrom', 'Cd-Rom' ],
-	     'zip' => [ 'zip', 'Zip' ],
-	     'floppy-ls' => [ 'floppy', 'LS-120' ],
-	     'floppy' => [ 'floppy', 'Floppy' ],
-    );
-    foreach (fs::read_fstab($prefix, "/etc/fstab")) {
-
-	my ($name_, $nb) = $_->{mntpoint} =~ m|.*/(\S+?)(\d*)$/|;
-	my ($name, $text) = @{$l{$name_} || []};
-
-	my $f = ${{
-	    supermount => sub { $name .= '.fsdev' if $name },
-	    vfat => sub { $name = 'Dos_'; $text = $name_ },
-	}}{$_->{type}};
-	&$f if $f;
-
-	template2userfile($prefix, 
-			  "$ENV{SHARE_PATH}/$name.kdelnk.in",
-			  "Desktop/$text" .  ($nb && " $nb"). ".kdelnk",
-			  1, %$_) if $name;
-    }
-
-    # rename the .kdelnk to the name found in the .kdelnk as kde doesn't use it
-    # for displaying
-    foreach my $dir (grep { -d $_ } list_skels($prefix, 'Desktop')) {
-	foreach (grep { /\.kdelnk$/ } all($dir)) {
-	    cat_("$dir/$_") =~ /^Name\[\Q$ENV{LANG}\E\]=(.{2,14})$/m
-	      and rename "$dir/$_", "$dir/$1.kdelnk";
-	}
-    }
-}
-
-sub kdemove_desktop_file {
-    my ($prefix) = @_;
-    my @toMove = qw(doc.kdelnk news.kdelnk updates.kdelnk home.kdelnk printer.kdelnk floppy.kdelnk cdrom.kdelnk FLOPPY.kdelnk CDROM.kdelnk);
-
-    #- remove any existing save in Trash of each user and
-    #- move appropriate file there after an upgrade.
-    foreach my $dir (grep { -d $_ } list_skels($prefix, 'Desktop')) {
-	renamef("$dir/$_", "$dir/Trash/$_") 
-	  foreach grep { -e "$dir/$_" } @toMove, grep { /\.rpmorig$/ } all($dir)
-    }
-}
-
-
-#-###############################################################################
-#- auto_install stuff
-#-###############################################################################
-sub auto_inst_file() { ($::g_auto_install ? "/tmp" : "$::o->{prefix}/root") . "/auto_inst.cfg.pl" }
-
-sub report_bug {
-    my ($prefix) = @_;
-    any::report_bug($prefix, 'auto_inst' => g_auto_install());
-}
-
-sub g_auto_install {
-    my ($replay) = @_;
-    my $o = {};
-
-    require pkgs;
-    $o->{default_packages} = pkgs::selected_leaves($::o->{packages});
-
-    my @fields = qw(mntpoint type size);
-    $o->{partitions} = [ map { my %l; @l{@fields} = @$_{@fields}; \%l } grep { $_->{mntpoint} } @{$::o->{fstab}} ];
-    
-    exists $::o->{$_} and $o->{$_} = $::o->{$_} foreach qw(lang authentication mouse wacom netc timezone superuser intf keyboard users partitioning isUpgrade manualFstab nomouseprobe crypto security netcnx useSupermount autoExitInstall mkbootdisk); #- TODO modules bootloader 
-
-    if (my $printer = $::o->{printer}) {
-	$o->{printer}{$_} = $::o->{printer}{$_} foreach qw(SPOOLER DEFAULT BROWSEPOLLADDR BROWSEPOLLPORT MANUALCUPSCONFIG);
-	$o->{printer}{configured} = {};
-	foreach my $queue (keys %{$::o->{printer}{configured}}) {
-	    my $val = $::o->{printer}{configured}{$queue}{queuedata};
-	    exists $val->{$_} and $o->{printer}{configured}{$queue}{queuedata}{$_} = $val->{$_} foreach keys %{$val || {}};
-	}
-    }
-
-    if (my $card = $::o->{X}{card}) {
-	$o->{X}{$_} = $::o->{X}{$_} foreach qw(default_depth resolution_wanted);
-	if ($o->{X}{default_depth} and my $depth = $card->{depth}{$o->{X}{default_depth}}) {
-	    $depth ||= [];
-	    $o->{X}{resolution_wanted} ||= join "x", @{$depth->[0]} unless is_empty_array_ref($depth->[0]);
-	    $o->{X}{monitor} = $::o->{X}{monitor} if $::o->{X}{monitor}{manual};
-	}
-    }
-
-    local $o->{partitioning}{auto_allocate} = !$replay;
-    local $o->{autoExitInstall} = !$replay;
-
-    #- deep copy because we're modifying it below
-    $o->{users} = [ @{$o->{users} || []} ];
-
-    $_ = { %{$_ || {}} }, delete @$_{qw(oldu oldg password password2)} foreach $o->{superuser}, @{$o->{users} || []};
-    
-    require Data::Dumper;
-    my $str = join('', 
-"#!/usr/bin/perl -cw
-#
-# You should check the syntax of this file before using it in an auto-install.
-# You can do this with 'perl -cw auto_inst.cfg.pl' or by executing this file
-# (note the '#!/usr/bin/perl -cw' on the first line).
-", 
-	 Data::Dumper->Dump([$o], ['$o']), if_($replay, 
-qq(\npackage install_steps_auto_install;), q(
-$graphical = 1;
-push @graphical_steps, 'doPartitionDisks', 'formatPartitions';
-)), "\0");
-    $str =~ s/ {8}/\t/g; #- replace all 8 space char by only one tabulation, this reduces file size so much :-)
-    $str;
-}
-
-sub getAndSaveInstallFloppy {
-    my ($o, $where) = @_;
-    if ($postinstall_rpms && -d $postinstall_rpms && -r "$postinstall_rpms/auto_install.img") {
-	log::l("getAndSaveInstallFloppy: using file saved as $postinstall_rpms/auto_install.img");
-	cp_af("$postinstall_rpms/auto_install.img", $where);
-    } else {
-	my $image = cat_("/proc/cmdline") =~ /pcmcia/ ? "pcmcia" :
-	  ${{ disk => 'hd', cdrom => 'cdrom', ftp => 'network', nfs => 'network', http => 'network' }}{$o->{method}};
-	$image .= arch() =~ /sparc64/ && "64"; #- for sparc64 there are a specific set of image.
-	getAndSaveFile("images/$image.img", $where) or log::l("failed to write Install Floppy ($image.img) to $where"), return;
-    }
-    1;
-}
-
-sub getAndSaveAutoInstallFloppy {
-    my ($o, $replay, $where) = @_;
-
-    eval { modules::load('loop') };
-
-    if (arch() =~ /sparc/) {
-	my $imagefile = "$o->{prefix}/tmp/autoinst.img";
-	my $mountdir = "$o->{prefix}/tmp/mount"; -d $mountdir or mkdir $mountdir, 0755;
-	my $workdir = "$o->{prefix}/tmp/work"; -d $workdir or rmdir $workdir;
-
-	getAndSaveInstallFloppy($o, $imagefile) or return;
-        devices::make($_) foreach qw(/dev/loop6 /dev/ram);
-
-        run_program::run("losetup", "/dev/loop6", $imagefile);
-        fs::mount("/dev/loop6", $mountdir, "romfs", 'readonly');
-        cp_af($mountdir, $workdir);
-        fs::umount($mountdir);
-        run_program::run("losetup", "-d", "/dev/loop6");
-
-	substInFile { s/timeout.*//; s/^(\s*append\s*=\s*\".*)\"/$1 kickstart=floppy\"/ } "$workdir/silo.conf"; #" for po
-#-TODO	output "$workdir/ks.cfg", generate_ks_cfg($o);
-	output "$workdir/boot.msg", "\n7m",
-"!! If you press enter, an auto-install is going to start.
-    ALL data on this computer is going to be lost,
-    including any Windows partitions !!
-", "7m\n";
-
-	local $o->{partitioning}{clearall} = 1;
-	output("$workdir/auto_inst.cfg", g_auto_install());
-
-        run_program::run("genromfs", "-d", $workdir, "-f", "/dev/ram", "-A", "2048,/..", "-a", "512", "-V", "DrakX autoinst");
-        fs::mount("/dev/ram", $mountdir, 'romfs', 0);
-        run_program::run("silo", "-r", $mountdir, "-F", "-i", "/fd.b", "-b", "/second.b", "-C", "/silo.conf");
-        fs::umount($mountdir);
-	require commands;
-        commands::dd("if=/dev/ram", "of=$where", "bs=1440", "count=1024");
-
-        rm_rf($workdir, $mountdir, $imagefile);
-    } elsif (arch() =~ /ia64/) {
-	#- nothing yet
-    } else {
-	my $imagefile = "$o->{prefix}/tmp/autoinst.img";
-	my $mountdir = "$o->{prefix}/tmp/aif-mount"; -d $mountdir or mkdir $mountdir, 0755;
-
-	my $param = 'kickstart=floppy ' . generate_automatic_stage1_params($o);
-
-	getAndSaveInstallFloppy($o, $imagefile) or return;
-
-	my $dev = devices::set_loop($imagefile) or log::l("couldn't set loopback device"), return;
-        fs::mount($dev, $mountdir, 'vfat', 0);
-
-	substInFile { 
-	    s/timeout.*/$replay ? 'timeout 1' : ''/e;
-	    s/^(\s*append)/$1 $param/ 
-	} "$mountdir/syslinux.cfg";
-
-	unlink "$mountdir/help.msg";
-	output "$mountdir/boot.msg", "\n0c",
-"!! If you press enter, an auto-install is going to start.
-   All data on this computer is going to be lost,
-   including any Windows partitions !!
-", "07\n" if !$replay;
-
-	local $o->{partitioning}{clearall} = !$replay;
-	output("$mountdir/auto_inst.cfg", g_auto_install($replay));
-
-	fs::umount($mountdir);
-	rmdir $mountdir;
-	c::del_loop($dev);
-	require commands;
-	commands::dd("if=$imagefile", "of=$where", "bs=1440", "count=1024");
-	unlink $imagefile;
-    }
-    1;
-}
-
-
-sub g_default_packages {
-    my ($o, $quiet) = @_;
-
-    my $floppy = detect_devices::floppy();
-
-    while (1) {
-	$o->ask_okcancel('', _("Insert a FAT formatted floppy in drive %s", $floppy), 1) or return;
-
-	eval { fs::mount(devices::make($floppy), "/floppy", "vfat", 0) };
-	last if !$@;
-	$o->ask_warn('', _("This floppy is not FAT formatted"));
-    }
-
-    require Data::Dumper;
-    my $str = Data::Dumper->Dump([ { default_packages => pkgs::selected_leaves($o->{packages}) } ], ['$o']);
-    $str =~ s/ {8}/\t/g;
-    output('/floppy/auto_inst.cfg', 
-	   "# You should always check the syntax with 'perl -cw auto_inst.cfg.pl'\n",
-	   "# before testing.  To use it, boot with ``linux defcfg=floppy''\n",
-	   $str, "\0");
-    fs::umount("/floppy");
-
-    $quiet or $o->ask_warn('', _("To use this saved packages selection, boot installation with ``linux defcfg=floppy''"));
-}
-
-sub loadO {
-    my ($O, $f) = @_; $f ||= auto_inst_file;
-    my $o;
-    if ($f =~ /^(floppy|patch)$/) {
-	my $f = $f eq "floppy" ? 'auto_inst.cfg' : "patch";
-	unless ($::testing) {
-	    fs::mount(devices::make(detect_devices::floppy()), "/mnt", (arch() =~ /sparc/ ? "romfs" : "vfat"), 'readonly');
-	    $f = "/mnt/$f";
-	}
-	-e $f or $f .= '.pl';
-
-	my $b = before_leaving {
-	    fs::umount("/mnt") unless $::testing;
-	    modules::unload($_) foreach qw(vfat fat);
-	};
-	$o = loadO($O, $f);
-    } else {
-	-e "$f.pl" and $f .= ".pl" unless -e $f;
-
-	my $fh = -e $f ? do { local *F; open F, $f; *F } : getFile($f) or die _("Error reading file %s", $f);
-	{
-	    local $/ = "\0";
-	    no strict;
-	    eval <$fh>;
-	    close $fh;
-	    $@ and die;
-	}
-	add2hash_($o ||= {}, $O);
-    }
-    bless $o, ref $O;
-}
-
-sub generate_automatic_stage1_params {
-    my ($o) = @_;
-
-    my @ks = "method:$o->{method}";
-
-    if ($o->{method} =~ /http/) {
-	"$ENV{URLPREFIX}" =~ m|http://(.*)/(.*)| or die;
-	push @ks, "server:$1", "directory:$2";
-    } elsif ($o->{method} =~ /ftp/) {
-	push @ks,  "server:$ENV{HOST}", "directory:$ENV{PREFIX}", "user:$ENV{LOGIN}", "pass:$ENV{PASSWORD}";
-    } elsif ($o->{method} =~ /nfs/) {
-	cat_("/proc/mounts") =~ m|(\S+):(\S+)\s+/tmp/image nfs| or die;
-	push @ks, "server:$1", "directory:$2";
-    }
-
-    my ($intf) = values %{$o->{intf}};
-    if ($intf->{BOOTPROTO} =~ /dhcp/) {
-	push @ks, "network:dhcp";
-    } else {
-	require network;
-	push @ks, "network:static", "ip:$intf->{IPADDR}", "netmask:$intf->{NETMASK}", "gateway:$o->{netc}{GATEWAY}";
-	my @dnss = network::dnsServers($o->{netc});
-	push @ks, "dns:$dnss[0]" if @dnss;
-    }
-    "automatic=".join(',', @ks);
-}
-
-sub guess_mount_point {
-    my ($part, $prefix, $user) = @_;
-
-    my %l = (
-	     '/'     => 'etc/fstab',
-	     '/boot' => 'vmlinuz',
-	     '/tmp'  => '.X11-unix',
-	     '/usr'  => 'X11R6',
-	     '/var'  => 'catman',
-	    );
-
-    my $handle = any::inspect($part, $prefix) or return;
-    my $d = $handle->{dir};
-    my ($mnt) = grep { -e "$d/$l{$_}" } keys %l;
-    $mnt ||= (stat("$d/.bashrc"))[4] ? '/root' : '/home/user' . ++$$user if -e "$d/.bashrc";
-    $mnt ||= (grep { -d $_ && (stat($_))[4] >= 500 && -e "$_/.bashrc" } glob_("$d")) ? '/home' : '';
-    ($mnt, $handle);
-}
-
-sub suggest_mount_points {
-    my ($fstab, $prefix, $uniq) = @_;
-
-    my $user;
-    foreach my $part (grep { isTrueFS($_) } @$fstab) {
-	$part->{mntpoint} && !$part->{unsafeMntpoint} and next; #- if already found via an fstab
-
-	my ($mnt, $handle) = guess_mount_point($part, $prefix, \$user) or next;
-
-	next if $uniq && fsedit::mntpoint2part($mnt, $fstab);
-	$part->{mntpoint} = $mnt; delete $part->{unsafeMntpoint};
-
-	#- try to find other mount points via fstab
-	fs::merge_info_from_fstab($fstab, $handle->{dir}, $uniq) if $mnt eq '/';
-    }
-    $_->{mntpoint} and log::l("suggest_mount_points: $_->{device} -> $_->{mntpoint}") foreach @$fstab;
-}
-
-#- mainly for finding the root partitions for upgrade
-sub find_root_parts {
-    my ($fstab, $prefix) = @_;
-    log::l("find_root_parts");
-    my $user;
-    grep { 
-	my ($mnt) = guess_mount_point($_, $prefix, \$user);
-	$mnt eq '/';
-    } @$fstab;
-}
-sub use_root_part {
-    my ($fstab, $part, $prefix) = @_;
-    {
-	my $handle = any::inspect($part, $prefix) or die;
-	fs::merge_info_from_fstab($fstab, $handle->{dir}, 'uniq');
-    }
-    map { $_->{mntpoint} = 'swap' } grep { isSwap($_) } @$fstab; #- use all available swap.
-}
-
-sub getHds {
-    my ($o, $f_err) = @_;
-    my $ok = 1;
-    my $try_scsi = !$::expert;
-    my $flags = $o->{partitioning};
-
-    my @drives = detect_devices::hds();
-#    add2hash_($o->{partitioning}, { readonly => 1 }) if partition_table_raw::typeOfMBR($drives[0]{device}) eq 'system_commander';
-
-  getHds: 
-    my $all_hds = catch_cdie { fsedit::hds(\@drives, $flags) }
-      sub {
-	  $ok = 0;
-	  my $err = $@; $err =~ s/ at (.*?)$//;
-	  log::l("error reading partition table: $err");
-	  !$flags->{readonly} && $f_err and $f_err->($err);
-      };
-    my $hds = $all_hds->{hds};
-
-    if (is_empty_array_ref($hds) && $try_scsi) {
-	$try_scsi = 0;
-	$o->setupSCSI; #- ask for an unautodetected scsi card
-	goto getHds;
-    }
-    if (!$::testing) {
-	@$hds = grep { eval { partition_table_raw::test_for_bad_drives($_) }; !$@ } @$hds;
-    }
-
-    $ok = fsedit::verifyHds($hds, $flags->{readonly}, $ok)
-        if !($flags->{clearall} || $flags->{clear});
-
-    #- try to figure out if the same number of hds is available, use them if ok.
-    $ok && $hds && @$hds > 0 && @{$o->{all_hds}{hds} || []} == @$hds and return $ok;
-
-    fs::get_raw_hds('', $all_hds);
-    fs::add2all_hds($all_hds, @{$o->{manualFstab}});
-
-    $o->{all_hds} = $all_hds;
-    $o->{fstab} = [ fsedit::get_all_fstab($all_hds) ];
-    fs::merge_info_from_mtab($o->{fstab});
-
-    my @win = grep { isFat($_) && isFat({ type => fsedit::typeOfPart($_->{device}) }) } @{$o->{fstab}};
-    log::l("win parts: ", join ",", map { $_->{device} } @win) if @win;
-    if (@win == 1) {
-	#- Suggest /boot/efi on ia64.
-	$win[0]{mntpoint} = arch() =~ /ia64/ ? "/boot/efi" : "/mnt/windows";
-    } else {
-	my %w; foreach (@win) {
-	    my $v = $w{$_->{device_windobe}}++;
-	    $_->{mntpoint} = $_->{unsafeMntpoint} = "/mnt/win_" . lc($_->{device_windobe}) . ($v ? $v+1 : ''); #- lc cuz of StartOffice(!) cf dadou
-	}
-    }
-
-    my @sunos = grep { isSunOS($_) && type2name($_->{type}) =~ /root/i } @{$o->{fstab}}; #- take only into account root partitions.
-    if (@sunos) {
-	my $v = '';
-	map { $_->{mntpoint} = $_->{unsafeMntpoint} = "/mnt/sunos" . ($v && ++$v) } @sunos;
-    }
-    #- a good job is to mount SunOS root partition, and to use mount point described here in /etc/vfstab.
-
-    $ok;
-}
-
-sub log_sizes {
-    my ($o) = @_;
-    my @df = MDK::Common::System::df($o->{prefix});
-    log::l(sprintf "Installed: %s(df), %s(rpm)",
-	   formatXiB($df[0] - $df[1], 1024),
-	   formatXiB(sum(`$ENV{LD_LOADER} rpm --root $o->{prefix}/ -qa --queryformat "%{size}\n"`))) if -x "$o->{prefix}/bin/rpm";
-}
-
-sub copy_advertising {
-    my ($o) = @_;
-
-    return if $::rootwidth < 800;
-
-    my $f;
-    my $source_dir = "Mandrake/share/advertising";
-    foreach ("." . $o->{lang}, "." . substr($o->{lang},0,2), '') {
-	$f = getFile("$source_dir$_/list") or next;
-	$source_dir = "$source_dir$_";
-    }
-    if (my @files = <$f>) {
-	my $dir = "$o->{prefix}/tmp/drakx-images";
-	mkdir $dir;
-	unlink glob_("$dir/*");
-	foreach (@files) {
-	    chomp;
-	    getAndSaveFile("$source_dir/$_", "$dir/$_");
-	}
-	@advertising_images = map { "$dir/$_" } @files;
-    }
-}
-sub remove_advertising {
-    my ($o) = @_;
-    unlink @advertising_images;
-    rmdir "$o->{prefix}/tmp/drakx-images";
-    @advertising_images = ();
-}
-
-sub disable_user_view {
-    my ($prefix) = @_;
-    substInFile { s/^UserView=.*/UserView=true/ } "$prefix/usr/share/config/kdm/kdmrc";
-    substInFile { s/^Browser=.*/Browser=0/ } "$prefix/etc/X11/gdm/gdm.conf";
-}
-
-sub write_fstab {
-    my ($o) = @_;
-    fs::write_fstab($o->{all_hds}, $o->{prefix}) if !$::live;
-}
-
-my @bigseldom_used_groups = (
-  [ qw(pvcreate pvdisplay vgchange vgcreate vgdisplay vgextend vgremove vgscan lvcreate lvdisplay lvremove /lib/liblvm.so) ],
-);
-
-sub check_prog {
-    my ($f) = @_;
-
-    my @l = $f !~ m|^/| ?
-        map { "$_/$f" } split(":", $ENV{PATH}) :
-	$f;
-    return if grep { -x $_ } @l;
-
-    common::usingRamdisk() or log::l("ERROR: check_prog can't find the program $f and we're not using ramdisk"), return;
-
-    my ($f_) = map { m|^/| ? $_ : "/usr/bin/$_" } $f;
-    remove_bigseldom_used();
-    foreach (@bigseldom_used_groups) {
-	my (@l) = map { m|^/| ? $_ : "/usr/bin/$_" } @$_;
-	if (member($f_, @l)) {
-	    foreach (@l) {
-		getAndSaveFile($_);
-		chmod 0755, $_;
-	    }
-	    return;
-	}
-    }
-    getAndSaveFile($f_);
-    chmod 0755, $f_;
-}
-
-sub remove_unused {
-    $::testing and return;
-    if ($::o->isa('interactive_gtk')) {
-	unlink glob_("/lib/lib$_*") foreach qw(slang newt);
-	unlink "/usr/bin/perl-install/auto/Newt/Newt.so";
-    } else {
-	unlink glob_("/usr/X11R6/bin/XF*");
-    }
-}
-
-sub remove_bigseldom_used {
-    log::l("remove_bigseldom_used");
-    $::testing and return;
-    remove_unused();
-    unlink glob_("/usr/share/gtk/themes/$_*") foreach qw(DarkMarble marble3d);
-    unlink(m|^/| ? $_ : "/usr/bin/$_") foreach 
-      ((map { @$_ } @bigseldom_used_groups),
-       qw(mkreiserfs resize_reiserfs),
-      );
-}
-
-################################################################################
-package pkgs_interactive;
-use run_program;
-use common;
-use pkgs;
-
-sub install_steps::do_pkgs {
-    my ($o) = @_;
-    bless { o => $o }, 'pkgs_interactive';
-}
-
-sub install {
-    my ($do, @l) = @_;
-    $do->{o}->pkg_install(@l);
-}
-
-sub is_installed {
-    my ($do, @l) = @_;
-    foreach (@l) {
-	my $p = pkgs::packageByName($do->{o}->{packages}, $_);
-	$p && pkgs::packageFlagSelected($p) or return;
-    }
-    1;
-}
-
-sub remove {
-    my ($do, @l) = @_;
-
-    @l = grep {
-	my $p = pkgs::packageByName($do->{o}->{packages}, $_);
-	pkgs::unselectPackage($do->{o}->{packages}, $p) if $p;
-	$p;
-    } @l;
-    run_program::rooted($do->{o}->{prefix}, 'rpm', '-e', @l);
-}
-
-sub remove_nodeps {
-    my ($do, @l) = @_;
-
-    @l = grep {
-	my $p = pkgs::packageByName($do->{o}->{packages}, $_);
-	pkgs::packageSetFlagSelected($p, 0) if $p;
-	$p;
-    } @l;
-    run_program::rooted($do->{o}->{prefix}, 'rpm', '-e', '--nodeps', @l);
-}
-################################################################################
-
-package install_any;
-
-1;
diff --git a/perl-install/install_gtk.pm b/perl-install/install_gtk.pm
deleted file mode 100644
index f9dfab493..000000000
--- a/perl-install/install_gtk.pm
+++ /dev/null
@@ -1,440 +0,0 @@
-package install_gtk; # $Id$
-
-use diagnostics;
-use strict;
-
-use my_gtk qw(:helpers :wrappers);
-use common;
-use lang;
-use devices;
-
-#-#####################################################################################
-#-INTERN CONSTANT
-#-#####################################################################################
-my @themes_vga16 = qw(blue blackwhite savane);
-my @themes_desktop = qw(mdk-Desktop DarkMarble marble3d blueHeart);
-my @themes_firewall = qw(mdk-Firewall);
-my @themes = qw(mdk DarkMarble marble3d blueHeart);
-
-my (@background1, @background2);
-
-
-#------------------------------------------------------------------------------
-sub load_rc {
-    my ($name) = @_;
-
-    if (my ($f) = grep { -r $_ } map { "$_/$name.rc" } ("share", $ENV{SHARE_PATH}, dirname(__FILE__))) {
-	Gtk::Rc->parse($f);
-	foreach (cat_($f)) {
-	    if (/style\s+"background"/ .. /^\s*$/) {
-		@background1 = map { $_ * 256 * 257 } split ',', $1 if /NORMAL.*\{(.*)\}/;
-		@background2 = map { $_ * 256 * 257 } split ',', $1 if /PRELIGHT.*\{(.*)\}/;
-	    }
-	}
-    }
-}
-
-sub default_theme {
-    my ($o) = @_;
-    @themes = @themes_desktop if $o->{meta_class} eq 'desktop';
-    @themes = @themes_firewall if $o->{meta_class} eq 'firewall';
-    @themes = @themes_vga16 if $o->{simple_themes} || $o->{vga16};
-    install_theme($o, $o->{theme} || $themes[0]);
-}
-
-#------------------------------------------------------------------------------
-sub install_theme {
-    my ($o, $theme) = @_;
-
-    $o->{theme} = $theme || $o->{theme};
-
-    load_rc($_) foreach "themes-$o->{theme}", "install", "themes";
-
-    if (my ($font, $font2) = lang::get_x_fontset($o->{lang}, $::rootwidth < 800 ? 10 : 12)) {
-	$font2 ||= $font;
-	Gtk::Rc->parse_string(qq(
-style "default-font" 
-{
-   fontset = "$font,*"
-}
-style "small-font"
-{
-   fontset = "$font2,*"
-}
-widget "*" style "default-font"
-widget "*Steps*" style "small-font"
-
-));
-    }
-
-    gtkset_background(@background1) unless $::live; #- || testing;
-
-    create_logo_window($o);
-    create_help_window($o);
-}
-
-#------------------------------------------------------------------------------
-sub create_big_help {
-    my ($o) = @_;
-    my $w = my_gtk->new('', grab => 1, force_position => [ $::stepswidth, $::logoheight ]);
-    $w->{rwindow}->set_usize($::logowidth, $::rootheight - $::logoheight);
-    gtkadd($w->{window},
-	   gtkpack_(new Gtk::VBox(0,0),
-		    1, createScrolledWindow(gtktext_insert(new Gtk::Text, $o->{current_help})),
-		    0, gtksignal_connect(my $ok = new Gtk::Button(_("Ok")), "clicked" => sub { Gtk->main_quit }),
-		   ));
-    $ok->grab_focus;
-    $w->main;
-    gtkset_mousecursor_normal();
-}
-
-#------------------------------------------------------------------------------
-sub create_help_window {
-    my ($o) = @_;
-
-    my $w;
-    if ($w = $o->{help_window}) {
-	$_->destroy foreach $w->{window}->children;
-    } else {
-	$w = bless {}, 'my_gtk';
-	$w->{rwindow} = $w->{window} = new Gtk::Window;
-	$w->{rwindow}->set_uposition($::rootwidth - $::helpwidth, $::rootheight - $::helpheight);
-	$w->{rwindow}->set_usize($::helpwidth, $::helpheight);
-	$w->{rwindow}->set_title('skip');
-	$w->sync;
-    }
-    my $pixmap = gtkpng("$ENV{SHARE_PATH}/help.png");
-    gtkadd($w->{window},
-	   gtkpack_(new Gtk::HBox(0,-2),
-		    0, gtkadd(gtksignal_connect(new Gtk::Button, clicked => sub { create_big_help($o) }), $pixmap),
-		    1, createScrolledWindow($o->{help_window_text} = new Gtk::Text),
-		   ));
-    $o->set_help($o->{step}) if $o->{step};
-    $w->show;
-    $o->{help_window} = $w;
-}
-
-#------------------------------------------------------------------------------
-sub create_steps_window {
-    my ($o) = @_;
-
-    my $PIX_H = my $PIX_W = 21;
-
-    $o->{steps_window}->destroy if $o->{steps_window};
-
-    my $w = bless {}, 'my_gtk';
-    $w->{rwindow} = $w->{window} = new Gtk::Window;
-    $w->{rwindow}->set_uposition(0, 0);
-    $w->{rwindow}->set_usize($::stepswidth, $::stepsheight);
-    $w->{rwindow}->set_name('Steps');
-    $w->{rwindow}->set_events('button_press_mask');
-    $w->{rwindow}->set_title('skip');
-    #$w->show;
-
-    gtkadd($w->{window},
-	   gtkpack_(new Gtk::VBox(0,0),
-		    (map {; 1, $_ } map {
-			my $step_name = $_;
-			my $step = $o->{steps}{$_};
-			my $darea = new Gtk::DrawingArea;
-			my $in_button;
-			my $draw_pix = sub {
-			    my ($map, $mask) = gtkcreate_xpm($darea, $_[0]);
-			    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-							 $map, 0, 0,
-							 ($darea->allocation->[2]-$PIX_W)/2 + 3,
-							 ($darea->allocation->[3]-$PIX_H)/2,
-							 $PIX_W , $PIX_H );
-			};
-
-			my $f = sub { 
-			    my ($type) = @_;
-			    my $color = $step->{done} ? 'green' : $step->{entered} ? 'orange' : 'red';
-			    "$ENV{SHARE_PATH}/step-$color$type.xpm";
-			};
-			$darea->set_usize($PIX_W+3,$PIX_H);
-			$darea->set_events(['exposure_mask', 'enter_notify_mask', 'leave_notify_mask', 'button_press_mask', 'button_release_mask' ]);
-			$darea->signal_connect(expose_event => sub { $draw_pix->($f->('')) });
-			if ($step->{reachable}) {
-			    $darea->signal_connect(enter_notify_event => sub { $in_button=1; $draw_pix->($f->('-on')); });
-			    $darea->signal_connect(leave_notify_event => sub { undef $in_button; $draw_pix->($f->('')); });
-			    $darea->signal_connect(button_press_event => sub { $draw_pix->($f->('-click')); });
-			    $darea->signal_connect(button_release_event => sub { $in_button && die "setstep $step_name\n" });
-			}
-			gtkpack_(new Gtk::HBox(0,5), 0, $darea, 0, new Gtk::Label(translate($step->{text})));
-		    } grep {
-			!eval $o->{steps}{$_}{hidden};
-		    } @{$o->{orderedSteps}}),
-		    0, gtkpack(new Gtk::HBox(0,0), map {
-			my $t = $_;
-			my $w = new Gtk::Button('');
-			$w->set_name($t);
-			$w->set_usize(0, 7);
-			gtksignal_connect($w, clicked => sub {
-			    $::setstep or return; #- just as setstep s
-			    install_theme($o, $t); die "theme_changed\n" 
-			});
-		    } @themes)));
-    $w->show;
-    $o->{steps_window} = $w;
-}
-
-#------------------------------------------------------------------------------
-sub create_logo_window {
-    my ($o) = @_;
-
-    gtkdestroy($o->{logo_window});
-    my $w = bless {}, 'my_gtk';
-    $w->{rwindow} = $w->{window} = new Gtk::Window;
-    $w->{rwindow}->set_uposition($::stepswidth, 0);
-    $w->{rwindow}->set_usize($::logowidth, $::logoheight);
-    $w->{rwindow}->set_name("logo");
-    $w->{rwindow}->set_title('skip');
-    $w->show;
-    my $file = $o->{meta_class} eq 'desktop' ? "logo-mandrake-Desktop.png" : "logo-mandrake.png";
-    $o->{meta_class} eq 'firewall' and $file = "logo-mandrake-Firewall.png";
-    -r $file or $file = "$ENV{SHARE_PATH}/$file";
-    -r $file and gtkadd($w->{window}, gtkpng($file));
-    $o->{logo_window} = $w;
-}
-
-#------------------------------------------------------------------------------
-sub init_sizes() {
-    ($::rootheight,  $::rootwidth)    = my_gtk::gtkroot()->get_size;
-    $::live and $::rootheight -= 80;
-    #- ($::rootheight,  $::rootwidth)    = (min(768, $::rootheight), min(1024, $::rootwidth));
-    ($::stepswidth,  $::stepsheight)  = (145, $::rootheight);
-    ($::logowidth,   $::logoheight)   = ($::rootwidth - $::stepswidth, 40);
-    ($::helpwidth,   $::helpheight)   = ($::rootwidth - $::stepswidth, 104);
-    ($::windowwidth, $::windowheight) = ($::rootwidth - $::stepswidth, $::rootheight - $::helpheight - $::logoheight);
-}
-
-#------------------------------------------------------------------------------
-sub createXconf {
-    my ($file, $mouse_type, $mouse_dev, $wacom_dev) = @_;
-
-    devices::make("/dev/kbd") if arch() =~ /^sparc/; #- used by Xsun style server.
-    symlinkf(devices::make($mouse_dev), "/dev/mouse");
-
-    #- needed for imlib to start on 8-bit depth visual.
-    symlink("/tmp/stage2/etc/imrc", "/etc/imrc");
-    symlink("/tmp/stage2/etc/im_palette.pal", "etc/im_palette.pal");
-
-if (arch() =~ /^ia64/) {
-     require Xconfigurator;
-     my ($card) = Xconfigurator::cardConfigurationAuto();
-     Xconfigurator::updateCardAccordingName($card, $card->{type}) if $card && $card->{type};
-    local *F;
-    open F, ">$file" or die "can't create X configuration file $file";
-    print F <<END;
-
-Section "Files"
-   FontPath   "/usr/X11R6/lib/X11/fonts:unscaled"
-EndSection
-
-Section "InputDevice"
-    Identifier "Keyboard1"
-    Driver      "Keyboard"
-    Option "AutoRepeat"  "250 30"
-    Option "XkbDisable"
-
-    Option "XkbRules" "xfree86"
-    Option "XkbModel" "pc105"
-    Option "XkbLayout" ""
-EndSection
-
-Section "InputDevice"
-    Identifier  "Mouse1"
-    Driver      "mouse"
-    Option "Protocol"    "$mouse_type"
-    Option "Device"      "/dev/mouse"
-EndSection
-
-Section "Monitor"
-    Identifier "Generic|High Frequency SVGA, 1024x768 at 70 Hz"
-    VendorName "Unknown"
-    ModelName  "Unknown"
-    HorizSync  31.5-35.5
-    VertRefresh 50-70
-EndSection
-
-Section "Device"
-    Identifier "Generic VGA"
-    Driver     "vga"
-EndSection
-
-Section "Device"
-    Identifier  "device1"
-    VendorName  "Unknown"
-    BoardName   "Unknown"
-    Driver      "$card->{driver}"
-EndSection
-
-Section "Screen"
-    Identifier "screen1"
-    Device      "device1"
-    Monitor     "Generic|High Frequency SVGA, 1024x768 at 70 Hz"
-    DefaultColorDepth 16
-    Subsection "Display"
-        Depth       16
-        Modes       "800x600" "640x480"
-        ViewPort    0 0
-    EndSubsection
-EndSection
-
-Section "ServerLayout"
-    Identifier "layout1"
-    Screen     "screen1"
-    InputDevice "Mouse1" "CorePointer"
-    InputDevice "Keyboard1" "CoreKeyboard"
-EndSection
-
-END
-
-
-}
-else
-  {
-
-
-    my $wacom;
-    if ($wacom_dev) {
-	$wacom_dev = devices::make($wacom_dev);
-	$wacom = <<END;
-Section "Module"
-   Load "xf86Wacom.so"
-EndSection
-
-Section "XInput"
-    SubSection "WacomStylus"
-        Port "$wacom_dev"
-        AlwaysCore
-    EndSubSection
-    SubSection "WacomCursor"
-        Port "$wacom_dev"
-        AlwaysCore
-    EndSubSection
-    SubSection "WacomEraser"
-        Port "$wacom_dev"
-        AlwaysCore
-    EndSubSection
-EndSection
-END
-    }
-
-    local *F;
-    open F, ">$file" or die "can't create X configuration file $file";
-    print F <<END;
-Section "Files"
-   FontPath   "/usr/X11R6/lib/X11/fonts:unscaled"
-EndSection
-
-Section "Keyboard"
-   Protocol    "Standard"
-   AutoRepeat  0 0
-
-   LeftAlt         Meta
-   RightAlt        Meta
-   ScrollLock      Compose
-   RightCtl        Control
-END
-
-    if (arch() =~ /^sparc/) {
-	print F <<END;
-   XkbRules    "sun"
-   XkbModel    "sun"
-   XkbLayout   "us"
-   XkbCompat   "compat/complete"
-   XkbTypes    "types/complete"
-   XkbKeycodes "sun(type5)"
-   XkbGeometry "sun(type5)"
-   XkbSymbols  "sun/us(sun5)"
-END
-    } else {
-	print F "    XkbDisable\n";
-    }
-
-    print F <<END;
-EndSection
-
-Section "Pointer"
-   Protocol    "$mouse_type"
-   Device      "/dev/mouse"
-   ZAxisMapping 4 5
-EndSection
-
-$wacom
-
-Section "Monitor"
-   Identifier  "My Monitor"
-   VendorName  "Unknown"
-   ModelName   "Unknown"
-   HorizSync   31.5-35.5
-   VertRefresh 50-70
-   Modeline "640x480"     25.175 640  664  760  800   480  491  493  525
-   Modeline "640x480"     28.3   640  664  760  800   480  491  493  525
-   ModeLine "800x600"     36     800  824  896 1024   600  601  603  625
-EndSection
-
-
-Section "Device"
-   Identifier "Generic VGA"
-   VendorName "Unknown"
-   BoardName "Unknown"
-   Chipset "generic"
-EndSection
-
-Section "Device"
-   Identifier "svga"
-   VendorName "Unknown"
-   BoardName "Unknown"
-EndSection
-
-Section "Screen"
-    Driver      "vga16"
-    Device      "Generic VGA"
-    Monitor     "My Monitor"
-    Subsection "Display"
-        Modes       "640x480"
-        ViewPort    0 0
-    EndSubsection
-EndSection
-
-Section "Screen"
-    Driver      "fbdev"
-    Device      "Generic VGA"
-    Monitor     "My Monitor"
-    Subsection "Display"
-        Depth       16
-        Modes       "default"
-        ViewPort    0 0
-    EndSubsection
-EndSection
-
-Section "Screen"
-    Driver "svga"
-    Device      "svga"
-    Monitor     "My Monitor"
-    Subsection "Display"
-        Depth       16
-        Modes       "800x600" "640x480"
-        ViewPort    0 0
-    EndSubsection
-EndSection
-
-Section "Screen"
-    Driver      "accel"
-    Device      "svga"
-    Monitor     "My Monitor"
-    Subsection "Display"
-        Depth       16
-        Modes       "800x600" "640x480"
-        ViewPort    0 0
-    EndSubsection
-EndSection
-END
-}
-}
-#-   ModeLine "640x480"     28     640  672  768  800   480  490  492  525
-
-1;
diff --git a/perl-install/install_interactive.pm b/perl-install/install_interactive.pm
deleted file mode 100644
index 7b93bbf09..000000000
--- a/perl-install/install_interactive.pm
+++ /dev/null
@@ -1,252 +0,0 @@
-package install_interactive; # $Id$
-
-use diagnostics;
-use strict;
-
-use vars;
-
-use common;
-use partition_table qw(:types);
-use partition_table_raw;
-use detect_devices;
-use install_steps;
-use devices;
-use fsedit;
-use log;
-use fs;
-
-
-sub tellAboutProprietaryModules {
-    my ($o) = @_;
-    my @l = grep {$_} map { $_->{driver} =~ /^Bad:(.*)/ && $1 } detect_devices::probeall();
-    $o->ask_warn('', 
-_("Some hardware on your computer needs ``proprietary'' drivers to work.
-You can find some information about them at: %s", join(", ", @l))) if @l;
-}
-
-sub partition_with_diskdrake {
-    my ($o, $all_hds, $nowizard) = @_;
-    my $ok; 
-
-    $o->set_help('partition_with_diskdrake');
-    do {
-	$ok = 1;
-	require diskdrake_interactive;
-	{
-	    local $::expert = $::expert;
-	    diskdrake_interactive::main($o, $all_hds, $nowizard);
-	}
-	delete $o->{wizard} and return partitionWizard($o, 'nodiskdrake');
-	my @fstab = fsedit::get_all_fstab($all_hds);
-	
-	unless (fsedit::get_root_(\@fstab)) {
-	    $ok = 0;
-	    $o->ask_okcancel('', _("You must have a root partition.
-For this, create a partition (or click on an existing one).
-Then choose action ``Mount point'' and set it to `/'"), 1) or return;
-	}
-	if (!grep { isSwap($_) } @fstab) {
-	    $o->ask_warn('', _("You must have a swap partition")), $ok=0 if !$::expert;
-	    $ok &&= $::expert || $o->ask_okcancel('', _("You don't have a swap partition\n\nContinue anyway?"));
-	}
-	if (arch() =~ /ia64/ && !fsedit::has_mntpoint("/boot/efi", $all_hds)) {
-	    $o->ask_warn('', _("You must have a FAT partition mounted in /boot/efi"));
-	    $ok = '';
-	}
-    } until $ok;
-    1;
-}
-
-sub partitionWizardSolutions {
-    my ($o, $all_hds, $fstab, $readonly) = @_;
-    my $hds = $all_hds->{hds};
-    my @wizlog;
-    my (@solutions, %solutions);
-
-    my $min_linux = 400 << 11;
-    my $max_linux = 3000 << 11;
-    my $min_swap = 50 << 11;
-    my $max_swap = 300 << 11;
-    my $min_freewin = 100 << 11;
-
-    # each solution is a [ score, text, function ], where the function retunrs true if succeeded
-
-    my @good_hds = grep { $_->can_raw_add } @$hds;
-    if (fsedit::free_space(@good_hds) > $min_linux and !$readonly) {
-	$solutions{free_space} = [ 20, _("Use free space"), sub { fsedit::auto_allocate($all_hds); 1 } ]
-    } else { 
-	push @wizlog, _("Not enough free space to allocate new partitions") . ": " .
-	  (@good_hds ? 
-	   fsedit::free_space(@good_hds) . " < $min_linux" :
-	   "no harddrive on which partitions can be added") if !$readonly;
-    }
-
-    if (my @truefs = grep { isTrueFS($_) } @$fstab) {
-	#- value twice the ext2 partitions
-	$solutions{existing_part} = [ 6 + @truefs + @$fstab, _("Use existing partition"), sub { $o->ask_mntpoint_s($fstab) } ]
-    } else {
-	push @wizlog, _("There is no existing partition to use");
-    }
-
-    my @fats = grep { isFat($_) } @$fstab;
-    fs::df($_) foreach @fats;
-    if (my @ok_forloopback = sort { $b->{free} <=> $a->{free} } grep { $_->{free} > $min_linux + $min_swap + $min_freewin } @fats) {
-	$solutions{loopback} = 
-	  [ -10 - @fats, _("Use the Windows partition for loopback"), 
-	    sub { 
-		my ($s_root, $s_swap);
-		my $part = $o->ask_from_listf('', _("Which partition do you want to use for Linux4Win?"), \&partition_table::description, \@ok_forloopback) or return;
-		$max_swap = $min_swap + 1 if $part->{free} - $max_swap < $min_linux;
-		$o->ask_from('', _("Choose the sizes"), [ 
-		   { label => _("Root partition size in MB: "), val => \$s_root, min => $min_linux >> 11, max => min($part->{free} - $max_swap, $max_linux) >> 11, type => 'range' },
-		   { label => _("Swap partition size in MB: "), val => \$s_swap, min => $min_swap >> 11,  max => $max_swap >> 11, type => 'range' },
-		]) or return;
-		push @{$part->{loopback}}, 
-		  { type => 0x83, loopback_file => '/lnx4win/linuxsys.img', mntpoint => '/',    size => $s_root << 11, loopback_device => $part, notFormatted => 1 },
-		  { type => 0x82, loopback_file => '/lnx4win/swapfile',     mntpoint => 'swap', size => $s_swap << 11, loopback_device => $part, notFormatted => 1 };
-		fsedit::recompute_loopbacks($all_hds);
-		1;
-	    } ];
-	$solutions{resize_fat} = 
-	  [ 6 - @fats, _("Use the free space on the Windows partition"),
-	    sub {
-		$o->set_help('resizeFATChoose');
-		my $part = $o->ask_from_listf('', _("Which partition do you want to resize?"), \&partition_table::description, \@ok_forloopback) or return;
-		$o->set_help('resizeFATWait');
-		my $w = $o->wait_message(_("Resizing"), _("Computing Windows filesystem bounds"));
-		require resize_fat::main;
-		my $resize_fat = eval { resize_fat::main->new($part->{device}, devices::make($part->{device})) };
-		$@ and die _("The FAT resizer is unable to handle your partition, 
-the following error occured: %s", $@);
-		my $min_win = $resize_fat->min_size;
-		$part->{size} > $min_linux + $min_swap + $min_freewin + $min_win or die _("Your Windows partition is too fragmented, please run ``defrag'' first");
-		$o->ask_okcancel('', _("WARNING!
-
-DrakX will now resize your Windows partition. Be careful: this operation is
-dangerous. If you have not already done so, you should first exit the
-installation, run scandisk under Windows (and optionally run defrag), then
-restart the installation. You should also backup your data.
-When sure, press Ok.")) or return;
-
-		my $size = $part->{size};
-		$o->ask_from('', _("Which size do you want to keep for windows on"), [
-                   { label => _("partition %s", partition_table::description($part)), val => \$size, min => $min_win >> 11, max => ($part->{size} - $min_linux - $min_swap) >> 11, type => 'range' },
-                ]) or return;
-		$size <<= 11;
-
-		local *log::l = sub { $w->set(join(' ', @_)) };
-		eval { $resize_fat->resize($size) };
-		$@ and die _("FAT resizing failed: %s", $@);
-
-		$part->{size} = $size;
-		$part->{isFormatted} = 1;
-		
-		my ($hd) = fsedit::part2hd($part, $all_hds);
-		$hd->{isDirty} = $hd->{needKernelReread} = 1;
-		$hd->adjustEnd($part);
-		partition_table::adjust_local_extended($hd, $part);
-		partition_table::adjust_main_extended($hd);
-
-		fsedit::auto_allocate($all_hds);
-		1;
-	    } ] if !$readonly;
-    } else {
-	push @wizlog, _("There is no FAT partitions to resize or to use as loopback (or not enough space left)") .
-	  @fats ? "\nFAT partitions:" . join('', map { "\n  $_->{device} $_->{free} (" . ($min_linux + $min_swap + $min_freewin) . ")" } @fats) : '';
-    }
-
-    if (@$fstab && !$readonly) {
-	$solutions{wipe_drive} =
-	  [ 10, fsedit::is_one_big_fat($hds) ? _("Remove Windows(TM)") : _("Erase entire disk"), 
-	    sub {
-		$o->set_help('takeOverHdChoose');
-		my $hd = $o->ask_from_listf('', _("You have more than one hard drive, which one do you install linux on?"),
-					    \&partition_table::description, $hds) or return;
-		$o->set_help('takeOverHdConfirm');
-		$o->ask_okcancel('', _("ALL existing partitions and their data will be lost on drive %s", partition_table::description($hd))) or return;
-		partition_table_raw::zero_MBR($hd);
-		fsedit::auto_allocate($all_hds);
-		1;
-	    } ];
-    }
-
-    if (!$readonly) {
-	$solutions{diskdrake} = [ 0, _("Custom disk partitioning"), sub { partition_with_diskdrake($o, $all_hds, 'nowizard') } ];
-    }
-
-    $solutions{fdisk} =
-      [ -10, _("Use fdisk"), sub { 
-	    $o->enter_console;
-	    foreach (@$hds) {
-		print "\n" x 10, _("You can now partition %s.
-When you are done, don't forget to save using `w'", partition_table::description($_));
-		print "\n\n";
-		my $pid = 0;
-		if (arch() =~ /ppc/) {
-			$pid = fork or exec "pdisk", devices::make($_->{device});
-		} else {
-			$pid = fork or exec "fdisk", devices::make($_->{device});
-		}			
-		waitpid($pid, 0);
-	    }
-	    $o->leave_console;
-	    0;
-	} ] if $o->{partitioning}{fdisk};
-
-    log::l("partitioning wizard log:\n", (map { ">>wizlog>>$_\n" } @wizlog));
-    %solutions;
-}
-
-sub partitionWizard {
-    my ($o, $nodiskdrake) = @_;
-
-    $o->set_help('doPartitionDisks');
-
-    my %solutions = partitionWizardSolutions($o, $o->{all_hds}, $o->{fstab}, $o->{partitioning}{readonly});
-    if ($o->{lnx4win}) {
-	if ($solutions{loopback}) {
-	    %solutions = (loopback => $solutions{loopback});
-	} else {
-	    $o->ask_warn('', _("You don't have enough free space on your Windows partition")) if grep { isFat($_) } @{$o->{fstab}}
-	}
-    }
-
-    delete $solutions{diskdrake} if $nodiskdrake;
-
-    my @solutions = sort { $b->[0] <=> $a->[0] } values %solutions;
-
-    my $level = $::expert ? -9999 : 0;
-    my @sol = grep { $_->[0] >= $level } @solutions;
-
-    log::l(      "solutions found: " . join('', map {$_->[1]} @sol) . 
-	   " (all solutions found: " . join('', map {$_->[1]} @solutions) . ")");
-
-    @solutions = @sol if @sol > 1;
-    log::l("solutions: ", int @solutions);
-    @solutions or $o->ask_warn('', _("I can't find any room for installing")), die 'already displayed';
-
-    my $ok; while (!$ok) {
-	log::l('HERE: ', join(',', map { $_->[1] } @solutions));
-	my $sol = $o->ask_from_listf('', _("The DrakX Partitioning wizard found the following solutions:"), sub { $_[0][1] }, \@solutions) or redo;
-	log::l("partitionWizard calling solution $sol->[1]");
-	eval { $ok = $sol->[2]->() };
-	die if $@ =~ /setstep/;
-	$ok &&= !$@;
-	$@ and $o->ask_warn('', _("Partitioning failed: %s", $@));
-    }
-}
-
-sub upNetwork {
-    my ($o, $pppAvoided) = @_;
-    my $w = $o->wait_message('', _("Bringing up the network"));
-    install_steps::upNetwork($o, $pppAvoided);
-}
-sub downNetwork {
-    my ($o, $pppOnly) = @_;
-    my $w = $o->wait_message('', _("Bringing down the network"));
-    install_steps::downNetwork($o, $pppOnly);
-}
-
-
-
-1;
diff --git a/perl-install/install_steps.pm b/perl-install/install_steps.pm
deleted file mode 100644
index ee3fa2826..000000000
--- a/perl-install/install_steps.pm
+++ /dev/null
@@ -1,985 +0,0 @@
-package install_steps; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@filesToSaveForUpgrade @ISA);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use install_any qw(:all);
-use partition_table qw(:types);
-use detect_devices;
-use modules;
-use run_program;
-use lang;
-use keyboard;
-use fsedit;
-use loopback;
-use pkgs;
-use any;
-use log;
-use fs;
-
-@filesToSaveForUpgrade = qw(
-/etc/ld.so.conf /etc/fstab /etc/hosts /etc/conf.modules /etc/modules.conf
-);
-
-
-#-######################################################################################
-#- OO Stuff
-#-######################################################################################
-sub new($$) {
-    my ($type, $o) = @_;
-
-    bless $o, ref $type || $type;
-    return $o;
-}
-
-#-######################################################################################
-#- In/Out Steps Functions
-#-######################################################################################
-sub enteringStep {
-    my ($o, $step) = @_;
-    log::l("starting step `$step'");
-}
-sub leavingStep {
-    my ($o, $step) = @_;
-    log::l("step `$step' finished");
-
-    if (-d "$o->{prefix}/root") {
-	eval { cp_af("/tmp/ddebug.log", "$o->{prefix}/root") };
-	output(install_any::auto_inst_file(), install_any::g_auto_install());
-    }
-
-    for (my $s = $o->{steps}{first}; $s; $s = $o->{steps}{$s}{next}) {
-	#- the reachability property must be recomputed each time to take
-	#- into account failed step.
-	next if $o->{steps}{$s}{done} && !$o->{steps}{$s}{redoable};
-
-	my $reachable = 1;
-	if (my $needs = $o->{steps}{$s}{needs}) {
-	    my @l = ref $needs ? @$needs : $needs;
-	    $reachable = min(map { $o->{steps}{$_}{done} || 0 } @l);
-	}
-	$o->{steps}{$s}{reachable} = 1 if $reachable;
-    }
-    $o->{steps}{$step}{reachable} = $o->{steps}{$step}{redoable};
-
-    while (my $f = shift @{$o->{steps}{$step}{toBeDone} || []}) {
-	eval { &$f() };
-	$o->ask_warn(_("Error"), [
-_("An error occurred, but I don't know how to handle it nicely.
-Continue at your own risk."), $@ ]) if $@;
-    }
-}
-
-sub errorInStep($$) { print "error :(\n"; c::_exit(1) }
-sub kill_action {}
-sub set_help { 1 }
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-#------------------------------------------------------------------------------
-sub selectLanguage {
-    my ($o) = @_;
-    lang::set($o->{lang});
-    $o->{langs} ||= { $o->{lang} => 1 };
-
-    log::l("selectLanguage: pack_langs ", lang::pack_langs($o->{langs}));
-
-    if ($o->{keyboard_unsafe} || !$o->{keyboard}) {
-	$o->{keyboard_unsafe} = 1;
-	$o->{keyboard} = keyboard::lang2keyboard($o->{lang});
-	keyboard::setup($o->{keyboard}) if !$::live;
-    }
-
-    addToBeDone {
-	lang::write_langs($o->{prefix}, $o->{langs});
-    } 'formatPartitions' unless $::g_auto_install;
-    addToBeDone {
-	lang::write($o->{prefix}, $o->{lang});
-    } 'installPackages' unless $::g_auto_install;
-}
-#------------------------------------------------------------------------------
-sub selectKeyboard {
-    my ($o) = @_;
-    keyboard::setup($o->{keyboard});
-
-    addToBeDone {
-	keyboard::write($o->{prefix}, $o->{keyboard}, lang::lang2charset($o->{lang}));
-    } 'installPackages' unless $::g_auto_install;
-}
-#------------------------------------------------------------------------------
-sub selectPath {}
-#------------------------------------------------------------------------------
-sub selectInstallClass {}
-#------------------------------------------------------------------------------
-sub setupSCSI {
-    my ($o) = @_;
-    modules::configure_pcmcia($o->{pcmcia}) if $o->{pcmcia};
-    modules::load_ide();
-    modules::load_thiskind('scsi|disk');
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisksBefore {
-    my ($o) = @_;
-    eval { 
-	close *pkgs::LOG;
-	eval { fs::umount("$o->{prefix}/proc") };
-	eval {          fs::umount_all($o->{fstab}, $o->{prefix}) };
-	eval { sleep 1; fs::umount_all($o->{fstab}, $o->{prefix}) } if $@; #- HACK
-    } if $o->{fstab} && !$::testing && !$::live;
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisksAfter {
-    my ($o) = @_;
-
-    if (!$::testing) {
-	my $hds = $o->{all_hds}{hds};
-	partition_table::write($_) foreach @$hds;
-	$_->{rebootNeeded} and $o->rebootNeeded foreach @$hds;
-    }
-
-    fs::set_removable_mntpoints($o->{all_hds});
-    fs::set_all_default_options($o->{all_hds}, $o->{useSupermount}, $o->{security}, lang::fs_options($o->{lang}))
-	if !$o->{isUpgrade};
-
-    $o->{fstab} = [ fsedit::get_all_fstab($o->{all_hds}) ];
-    fsedit::get_root_($o->{fstab}) or die "Oops, no root partition";
-
-    # do not use devfs with root software raid
-    foreach ($o->{bootloader}{perImageAppend}) {
-	$_ .= ' devfs=mount' if !/devfs=/;
-    }
-    
-    if (arch() =~ /ppc/ && detect_devices::get_mac_generation =~ /NewWorld/) {
-	die "Need bootstrap partition to boot system!" if !(defined $partition_table_mac::bootstrap_part);
-    }
-    
-    if (arch() =~ /ia64/ && !fsedit::has_mntpoint("/boot/efi", $o->{all_hds})) {
-	die _("You must have a FAT partition mounted in /boot/efi");
-    }
-
-    if ($o->{partitioning}{use_existing_root}) {
-	#- ensure those partitions are mounted so that they are not proposed in choosePartitionsToFormat
-	fs::mount_part($_, $o->{prefix}) foreach (sort { $a->{mntpoint} cmp $b->{mntpoint} }
-						  grep { $_->{mntpoint} && maybeFormatted($_) } @{$o->{fstab}});
-    }
-
-    cat_("/proc/mounts") =~ m|(\S+)\s+/tmp/image nfs| &&
-      !grep { $_->{mntpoint} eq "/mnt/nfs" } @{$o->{all_hds}{nfss}} and
-	push @{$o->{all_hds}{nfss}}, { type => 'nfs', mntpoint => "/mnt/nfs", device => $1, options => "noauto,ro,nosuid,rsize=8192,wsize=8192" };
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisks {
-    my ($o) = @_;
-
-    install_any::getHds($o);
-
-    if ($o->{partitioning}{use_existing_root} || $o->{isUpgrade}) {
-	# either one root is defined (and all is ok), or we take the first one we find
-	my $p = fsedit::get_root_($o->{fstab}) || first(install_any::find_root_parts($o->{fstab}, $o->{prefix})) or die;
-	install_any::use_root_part($o->{fstab}, $p, $o->{prefix});
-    } 
-    if ($o->{partitioning}{auto_allocate}) {
-	fsedit::auto_allocate($o->{all_hds}, $o->{partitions});
-    }
-}
-
-#------------------------------------------------------------------------------
-
-sub ask_mntpoint_s {
-    my ($o, $fstab) = @_;
-
-    #- TODO: set the mntpoints
-
-    my %m; foreach (@$fstab) {
-	my $m = $_->{mntpoint};
-
-	next unless $m && $m ne 'swap'; #- there may be a lot of swap.
-
-	$m{$m} and die _("Duplicate mount point %s", $m);
-	$m{$m} = 1;
-
-	#- in case the type does not correspond, force it to ext2
-	$_->{type} = 0x83 if $m =~ m|^/| && !isFat($_) && !isTrueFS($_);
-    }
-    1;
-}
-
-
-sub rebootNeeded($) {
-    my ($o) = @_;
-    log::l("Rebooting...");
-    c::_exit(0);
-}
-
-sub choosePartitionsToFormat($$) {
-    my ($o, $fstab) = @_;
-
-    foreach (@$fstab) {
-	$_->{mntpoint} = "swap" if isSwap($_);
-	$_->{mntpoint} or next;
-	
-	add2hash_($_, { toFormat => $_->{notFormatted} });
-        $_->{toFormatUnsure} = member($_->{mntpoint}, '/', '/usr');
-
-	if (!$_->{toFormat}) {
-	    my $t = fsedit::typeOfPart($_->{device});
-	    $_->{toFormatUnsure} ||=
-	      #- if detected dos/win, it's not precise enough to just compare the types (too many of them)
-	      (!$t || isOtherAvailableFS({ type => $t }) ? !isOtherAvailableFS($_) : $t != $_->{type});
-	}
-    }
-}
-
-sub formatMountPartitions {
-    my ($o) = @_;
-    fs::formatMount_all($o->{all_hds}{raids}, $o->{fstab}, $o->{prefix});
-}
-
-#------------------------------------------------------------------------------
-sub setPackages {
-    my ($o) = @_;
-    install_any::setPackages($o);
-    pkgs::selectPackagesAlreadyInstalled($o->{packages}, $o->{prefix})
-	if !$o->{isUpgrade} && (-r "$o->{prefix}/var/lib/rpm/packages.rpm" || -r "$o->{prefix}/var/lib/rpm/Packages");
-}
-sub selectPackagesToUpgrade {
-    my ($o) = @_;
-    pkgs::selectPackagesToUpgrade($o->{packages}, $o->{prefix}, $o->{base}, $o->{toRemove}, $o->{toSave});
-}
-
-sub choosePackages {
-    my ($o, $packages, $compssUsers, $first_time) = @_;
-
-    #- now for upgrade, package that must be upgraded are
-    #- selected first, after is used the same scheme as install.
-
-    #- make sure we kept some space left for available else the system may
-    #- not be able to start (xfs at least).
-    my $available = install_any::getAvailableSpace($o);
-    my $availableCorrected = pkgs::invCorrectSize($available / sqr(1024)) * sqr(1024);
-    log::l(sprintf "available size %s (corrected %s)", formatXiB($available), formatXiB($availableCorrected));
-
-    add2hash_($o, { compssListLevel => 5 }) if !$::auto_install;
-
-    #- avoid destroying user selection of packages but only
-    #- for expert, as they may have done individual selection before.
-    if ($first_time || !$::expert) {
-	install_any::unselectMostPackages($o);
-
-	exists $o->{compssListLevel}
-	  and pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $o->{compssListLevel}, $availableCorrected);
-    }
-    $availableCorrected;
-}
-
-sub beforeInstallPackages {
-    my ($o) = @_;
-
-    #- save these files in case of upgrade failure.
-    if ($o->{isUpgrade}) {
-	foreach (@filesToSaveForUpgrade) {
-	    unlink "$o->{prefix}/$_.mdkgisave";
-	    if (-e "$o->{prefix}/$_") {
-		eval { cp_af("$o->{prefix}/$_", "$o->{prefix}/$_.mdkgisave") };
-	    }
-	}
-    }
-
-    #- some packages need such files for proper installation.
-    install_any::write_fstab($o);
-
-    require network;
-    network::add2hosts("$o->{prefix}/etc/hosts", "localhost.localdomain", "127.0.0.1");
-}
-
-sub pkg_install {
-    my ($o, @l) = @_;
-    log::l("selecting packages");
-    require pkgs;
-    if ($::testing) {
-	log::l("selecting package \"$_\"") foreach @l;
-    } else {
-	pkgs::selectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_) || die "$_ rpm not found") foreach @l;
-    }
-    my @toInstall = pkgs::packagesToInstall($o->{packages});
-    if (@toInstall) {
-	log::l("installing packages");
-	$o->installPackages;
-    } else {
-	log::l("all packages selected are already installed, nothing to do")
-    }
-}
-
-sub pkg_install_if_requires_satisfied {
-    my ($o, @l) = @_;
-    require pkgs;
-    foreach (@l) {
-	my %newSelection;
-	my $pkg = pkgs::packageByName($o->{packages}, $_) || die "$_ rpm not found";
-	pkgs::selectPackage($o->{packages}, $pkg, 0, \%newSelection);
-	if (scalar(keys %newSelection) == 1) {
-	    pkgs::selectPackage($o->{packages}, $pkg);
-	} else {
-	    log::l("pkg_install_if_requires_satisfied: not selecting $_ because of ", join(", ", keys %newSelection));
-	}
-    }
-    $o->installPackages;
-}
-
-sub installPackages($$) { #- complete REWORK, TODO and TOCHECK!
-    my ($o) = @_;
-    my $packages = $o->{packages};
-
-    if (@{$o->{toRemove} || []}) {
-	#- hack to ensure proper upgrade of packages from other distribution,
-	#- as release number are not mandrake based. this causes save of
-	#- important files and restore them after.
-	foreach (@{$o->{toSave} || []}) {
-	    if (-e "$o->{prefix}/$_") {
-		eval { cp_af("$o->{prefix}/$_", "$o->{prefix}/$_.mdkgisave") };
-	    }
-	}
-	pkgs::remove($o->{prefix}, $o->{toRemove});
-	foreach (@{$o->{toSave} || []}) {
-	    if (-e "$o->{prefix}/$_.mdkgisave") {
-		renamef("$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_");
-	    }
-	}
-	$o->{toSave} = [];
-
-	#- hack for compat-glibc to upgrade properly :-(
-	if (pkgs::packageFlagSelected(pkgs::packageByName($packages, 'compat-glibc')) &&
-	    !pkgs::packageFlagInstalled(pkgs::packageByName($packages, 'compat-glibc'))) {
-	    rename "$o->{prefix}/usr/i386-glibc20-linux", "$o->{prefix}/usr/i386-glibc20-linux.mdkgisave";
-	}
-    }
-
-    #- small transaction will be built based on this selection and depslist.
-    my @toInstall = pkgs::packagesToInstall($packages);
-
-    my $time = time;
-    $ENV{DURING_INSTALL} = 1;
-    pkgs::install($o->{prefix}, $o->{isUpgrade}, \@toInstall, $packages->{depslist}, $packages->{mediums});
-    delete $ENV{DURING_INSTALL};
-    run_program::rooted_or_die($o->{prefix}, 'ldconfig') unless $::g_auto_install;
-    log::l("Install took: ", formatTimeRaw(time - $time));
-    install_any::log_sizes($o);
-    scalar(@toInstall); #- return number of packages installed.
-}
-
-sub afterInstallPackages($) {
-    my ($o) = @_;
-
-    return if $::g_auto_install;
-
-    die _("Some important packages didn't get installed properly.
-Either your cdrom drive or your cdrom is defective.
-Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm\"
-") if grep { m|read failed: Input/output error| } cat_("$o->{prefix}/root/install.log");
-
-    if (arch() !~ /^sparc/) { #- TODO restore it as may be needed for sparc
-	-x "$o->{prefix}/usr/bin/dumpkeys" or $::testing or die 
-"Some important packages didn't get installed properly.
-
-Please switch to console 2 (using ctrl-alt-f2)
-and look at the log file /tmp/ddebug.log
-
-Consoles 1,3,4,7 may also contain interesting information";
-    }
-
-    #-  why not? cuz weather is nice today :-) [pixel]
-    common::sync(); common::sync();
-
-    #- generate /etc/lvmtab needed for rc.sysinit
-    run_program::rooted($o->{prefix}, 'vgscan') if -e '/etc/lvmtab';
-
-    #- configure PCMCIA services if needed.
-    modules::write_pcmcia($o->{prefix}, $o->{pcmcia});
-
-    #- for mandrake_firstime
-    touch "$o->{prefix}/var/lock/TMP_1ST";
-
-    any::writeandclean_ldsoconf($o->{prefix});
-
-    #- make sure wins is disabled in /etc/nsswitch.conf
-    #- else if eth0 is not existing, glibc segfaults.
-    substInFile { s/\s*wins// if /^\s*hosts\s*:/ } "$o->{prefix}/etc/nsswitch.conf";
-
-    #- make sure some services have been enabled (or a catastrophic restart will occur).
-    #- these are normally base package post install scripts or important services to start.
-    run_program::rooted($o->{prefix}, "chkconfig", "--add", $_) foreach
-			qw(random netfs network rawdevices sound kheader usb keytable syslog crond portmap);
-
-    run_program::rooted($o->{prefix}, "chkconfig", "--del", "gpm") if $o->{mouse}{device} =~ /ttyS/;
-
-    #- call update-menus at the end of package installation
-    run_program::rooted($o->{prefix}, "update-menus");
-
-    if ($o->{pcmcia}) {
-	substInFile { s/.*(TaskBarShowAPMStatus).*/$1=1/ } "$o->{prefix}/usr/lib/X11/icewm/preferences";
-	eval { cp_af("$o->{prefix}/usr/share/applnk/System/kapm.kdelnk",
-		     "$o->{prefix}/etc/skel/Desktop/Autostart/kapm.kdelnk") };
-    }
-
-    my $msec = "$o->{prefix}/etc/security/msec";
-    substInFile { s/^usb\n//; $_ .= "usb\n" if eof } "$msec/group.conf" if -d $msec;
-    substInFile { s/^xgrp\n//; $_ .= "xgrp\n" if eof } "$msec/group.conf" if -d $msec;
-    substInFile { s/^audio\n//; $_ .= "audio\n" if eof } "$msec/group.conf" if -d $msec;
-    substInFile { s/^cdrom\n//; $_ .= "cdrom\n" if eof } "$msec/group.conf" if -d $msec;
-    substInFile { s/^cdwriter\n//; $_ .= "cdwriter\n" if eof } "$msec/group.conf" if -d $msec;
-
-    my $pkg = pkgs::packageByName($o->{packages}, 'urpmi');
-    if ($pkg && pkgs::packageSelectedOrInstalled($pkg)) {
-	install_any::install_urpmi($o->{prefix}, 
-				   $::oem ? 'cdrom' : $o->{method}, #- HACK
-				   $o->{packages}{mediums});
-	pkgs::saveCompssUsers($o->{prefix}, $o->{packages}, $o->{compssUsers}, $o->{compssUsersSorted});
-    }
-
-#    #- update language and icons for KDE.
-#    update_gnomekderc($_, 'Locale', Language => "") foreach list_skels($o->{prefix}, '.kderc');
-#    log::l("updating kde icons according to available devices");
-#    install_any::kdeicons_postinstall($o->{prefix});
-
-    if ($o->{lang} =~ /^(zh_TW|th|vi|be|bg)/) {
-	#- skip since we don't have the right font (it badly fails at least for zh_TW)
-    } elsif (my $LANG = lang::lang2LANG($o->{lang})) {
-	my $kdmrc = "$o->{prefix}/usr/share/config/kdm/kdmrc";
-
-	my $charset = lang::lang2charset($o->{lang});
-	$charset = '' if member($charset, 'iso-8859-1', 'iso-8859-15'); #- keep the default for those
-	$charset = 'jisx0208.1983-0' if $charset eq 'jisx0208';
-	$charset = 'ksc5601.1987-0' if $charset eq 'ksc5601';
-
-	my $welcome = c::to_utf8(_("Welcome to %s", '%n'));
-	substInFile { 
-	    s/^(GreetString)=.*/$1=$welcome/;
-	    s/^(Language)=.*/$1=$LANG/;
-	    if ($charset) {
-		s/^(StdFont)=.*/$1=*,12,5,$charset,50,0/;
-		s/^(FailFont)=.*/$1=*,12,5,$charset,75,0/;
-		s/^(GreetFont)=.*/$1=*,24,5,$charset,50,0/;
-	    }
-	} "$o->{prefix}/usr/share/config/kdm/kdmrc";
-
-    }
-    install_any::disable_user_view($o->{prefix}) if $o->{security} >= 3 || $o->{authentication}{NIS};
-    run_program::rooted($o->{prefix}, "kdeDesktopCleanup");
-
-    foreach (list_skels($o->{prefix}, '.kde/share/config/kfmrc')) {
-	my $found;
-	substInFile {
-	    $found ||= /KFM Misc Defaults/;
-	    $_ .= 
-"[KFM Misc Defaults]
-GridWidth=85
-GridHeight=70
-" if eof && !$found;
-	} $_ 
-    }
-
-    #- move some file after an upgrade that may be seriously annoying.
-    #- and rename saved files to .mdkgiorig.
-    if ($o->{isUpgrade}) {
-	my $pkg = pkgs::packageByName($o->{packages}, 'rpm');
-	$pkg && pkgs::packageSelectedOrInstalled($pkg) && pkgs::versionCompare(pkgs::packageVersion($pkg), '4.0') >= 0 and
-	  pkgs::clean_old_rpm_db($o->{prefix});
-
-	log::l("moving previous desktop files that have been updated to Trash of each user");
-	install_any::kdemove_desktop_file($o->{prefix});
-
-	foreach (@filesToSaveForUpgrade) {
-	    renamef("$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_.mdkgiorig")
-	      if -e "$o->{prefix}$_.mdkgisave";
-	}
-    }
-
-    if ($o->{blank} || $o->{updatemodules}) {
-	my @l = detect_devices::floppies_dev();
-
-	foreach (qw(blank updatemodules)) {
-	    $o->{$_} eq "1" and $o->{$_} = $l[0] || die _("No floppy drive available");
-	}
-
-	$o->{blank} and $o->copyKernelFromFloppy();
-	$o->{updatemodules} and $o->updateModulesFromFloppy();
-    }
-}
-
-sub copyKernelFromFloppy {
-    my ($o) = @_;
-    return if $::testing || !$o->{blank};
-
-    fs::mount($o->{blank}, "/floppy", "vfat", 0);
-    eval { cp_af("/floppy/vmlinuz", "$o->{prefix}/boot/vmlinuz-default") };
-    if ($@) {
-	log::l("copying of /floppy/vmlinuz from blank modified disk failed: $@");
-    }
-    fs::umount("/floppy");
-}
-
-sub updateModulesFromFloppy {
-    my ($o) = @_;
-    return if $::testing || !$o->{updatemodules};
-
-    fs::mount($o->{updatemodules}, "/floppy", "ext2", 0);
-    foreach (glob_("$o->{prefix}/lib/modules/*")) {
-	my ($kernelVersion) = m,lib/modules/(\S*),;
-	log::l("examining updated modules for kernel $kernelVersion");
-	if (-d "/floppy/$kernelVersion") {
-	    my @src_files = glob_("/floppy/$kernelVersion/*");
-	    my @dest_files = split "\n", `chroot $o->{prefix} find /lib/modules`;
-	    foreach my $s (@src_files) {
-		log::l("found updatable module $s");
-		my ($sfile, $sext) = $s =~ /([^\/\.]*\.o)(?:\.gz|\.bz2)?$/;
-		my $qsfile = quotemeta $sfile;
-		my $qsext = quotemeta $sext;
-		foreach my $target (@dest_files) {
-		    $target =~ /$qsfile/ or next;
-		    eval { cp_af($s, $target) };
-		    if ($@) {
-			log::l("updating module $target by $s failed: $@");
-		    } else {
-			log::l("updating module $target by $s");
-		    }
-		    if ($target !~ /$qsfile$qsext$/) {
-			#- extension differ, first rename target file correctly,
-			#- then uncompress source file, then compress it as expected.
-			my ($basetarget, $text) = $target =~ /(.*?)(\.gz|\.bz2)$/;
-			rename $target, "$basetarget$sext";
-			$sext eq '.gz' and run_program::run("gzip", "-d", "$basetarget$sext");
-			$sext eq '.bz2' and run_program::run("bzip2", "-d", "$basetarget$sext");
-			$text eq '.gz' and run_program::run("gzip", $basetarget);
-			$text eq '.bz2' and run_program::run("bzip2", $basetarget);
-		    }
-		}
-	    }
-	}
-    }
-    fs::umount("/floppy");
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse($) {
-    my ($o) = @_;
-}
-
-#------------------------------------------------------------------------------
-sub configureNetwork {
-    my ($o) = @_;
-    require network;
-    network::configureNetwork2($o, $o->{prefix}, $o->{netc}, $o->{intf});
-}
-
-#------------------------------------------------------------------------------
-sub installCrypto {
-    my ($o) = @_;
-    my $u = $o->{crypto} or return; $u->{mirror} && $u->{packages} or return;
-
-    upNetwork($o);
-    require crypto;
-    my @crypto_packages = crypto::getPackages($o->{prefix}, $o->{packages}, $u->{mirror});
-    $o->pkg_install(@{$u->{packages}});
-}
-
-sub summary {
-    my ($o) = @_;
-    configureTimezone($o);
-    configurePrinter($o) if $o->{printer};
-}
-
-#------------------------------------------------------------------------------
-sub configureTimezone {
-    my ($o) = @_;
-    install_any::preConfigureTimezone($o);
-
-    $o->pkg_install('ntp') if $o->{timezone}{ntp};
-
-    require timezone;
-    timezone::write($o->{prefix}, $o->{timezone});
-}
-
-#------------------------------------------------------------------------------
-sub configureServices {
-    my ($o) = @_;
-    if ($o->{services}) {
-	require services;
-	services::doit($o, $o->{services}, $o->{prefix});
-    }
-}
-#------------------------------------------------------------------------------
-sub configurePrinter {
-    my($o) = @_;
-    $o->do_pkgs->install('foomatic', 'printer-utils','printer-testpages',
-			 if_($o->do_pkgs->is_installed('gimp'), 'gimpprint'));
-    
-    require printer;
-    eval { add2hash($o->{printer} ||= {}, printer::getinfo($o->{prefix})) }; #- get existing configuration.
-
-    require printerdrake;
-    printerdrake::install_spooler($o->{printer}, $o); #- not interactive...
-
-    foreach (values %{$o->{printer}{configured} || {}}) {
-	log::l("configuring printer queue " . $_->{queuedata}{queue} || $_->{QUEUE});
-	#- when copy is so adulée (sorry french taste :-)
-	#- and when there are some configuration in one place and in another place...
-	$o->{printer}{currentqueue} = {};
-	printer::copy_printer_params($_->{queuedata}, $o->{printer}{currentqueue});
-	printer::copy_printer_params($_, $o->{printer});
-	#- setup all configured queues, which is not the case interactively where
-	#- only the working queue is setup on configuration.
-	printer::configure_queue($o->{printer});
-    }
-}
-
-#------------------------------------------------------------------------------
-sub setRootPassword {
-    my ($o) = @_;
-    my $p = $o->{prefix};
-    my $u = $o->{superuser} ||= {};
-    $o->{superuser}{name} = 'root';
-    any::write_passwd_user($o->{prefix}, $o->{superuser}, $o->{authentication}{md5});
-    delete $o->{superuser}{name};
-}
-
-#------------------------------------------------------------------------------
-
-sub addUser {
-    my ($o) = @_;
-    my $p = $o->{prefix};
-    my $users = $o->{users} ||= [];
-
-    my (%uids, %gids); 
-    foreach (glob_("$p/home")) { my ($u, $g) = (stat($_))[4,5]; $uids{$u} = 1; $gids{$g} = 1; }
-
-    foreach (@$users) {
-	$_->{home} ||= "/home/$_->{name}";
-
-	my $u = $_->{uid} || ($_->{oldu} = (stat("$p$_->{home}"))[4]);
-	my $g = $_->{gid} || ($_->{oldg} = (stat("$p$_->{home}"))[5]);
-	#- search for available uid above 501 else initscripts may fail to change language for KDE.
-	if (!$u || getpwuid($u)) { for ($u = 501; getpwuid($u) || $uids{$u}; $u++) {} }
-	if (!$g                ) { for ($g = 501; getgrgid($g) || $gids{$g}; $g++) {} }
-	
-	$_->{uid} = $u; $uids{$u} = 1;
-	$_->{gid} = $g; $gids{$g} = 1;
-    }
-
-    any::write_passwd_user($p, $_, $o->{authentication}{md5}) foreach @$users;
-
-    local *F;
-    open F, ">> $p/etc/group" or die "can't append to group file: $!";
-    print F "$_->{name}:x:$_->{gid}:\n" foreach grep { ! getgrgid($_->{gid}) } @$users;
-
-    foreach my $u (@$users) {
-	if (! -d "$p$u->{home}") {
-	    my $mode = $o->{security} < 2 ? 0755 : 0750;
-	    eval { cp_af("$p/etc/skel", "$p$u->{home}") };
-	    if ($@) {
-		log::l("copying of skel failed: $@"); mkdir("$p$u->{home}", $mode); 
-	    } else {
-		chmod $mode, "$p$u->{home}";
-	    }
-	}
-	require commands;
-	eval { commands::chown_("-r", "$u->{uid}.$u->{gid}", "$p$u->{home}") }
-	    if $u->{uid} != $u->{oldu} || $u->{gid} != $u->{oldg};
-    }
-    any::addUsers($p, $users);
-
-    $o->pkg_install("autologin") if $o->{autologin};
-    any::set_autologin($p, $o->{autologin}, $o->{desktop});
-
-    install_any::setAuthentication($o);
-
-    install_any::disable_user_view($p) if @$users == ();
-}
-
-#------------------------------------------------------------------------------
-sub createBootdisk($) {
-    my ($o) = @_;
-    my $dev = $o->{mkbootdisk} or return;
-
-    my @l = detect_devices::floppies_dev();
-
-    $dev = shift @l || die _("No floppy drive available")
-      if $dev eq "1"; #- special case meaning autochoose
-
-    return if $::testing;
-
-    require bootloader;
-    bootloader::mkbootdisk($o->{prefix}, install_any::kernelVersion($o), $dev, $o->{bootloader}{perImageAppend});
-    $o->{mkbootdisk} = $dev;
-}
-
-#------------------------------------------------------------------------------
-sub readBootloaderConfigBeforeInstall {
-    my ($o) = @_;
-    my ($image, $v);
-
-    require bootloader;
-    add2hash($o->{bootloader} ||= {}, bootloader::read($o->{prefix}, arch() =~ /sparc/ ? "/etc/silo.conf" : arch() =~ /ppc/ ? "/etc/yaboot.conf" : "/etc/lilo.conf"));
-
-    #- since kernel or kernel-smp may not be upgraded, it should be checked
-    #- if there is a need to update existing lilo.conf entries by following
-    #- symlinks before kernel or other packages get installed.
-    #- update everything that could be a filename (for following symlink).
-    foreach my $e (@{$o->{bootloader}{entries}}) {
-	while (my $v = readlink "$o->{prefix}/$e->{kernel_or_dev}") {
-	    $v = "/boot/$v" if $v !~ m|^/|; -e "$o->{prefix}$v" or last;
-	    log::l("renaming /boot/$e->{kernel_or_dev} entry by $v");
-	    $e->{kernel_or_dev} = $v;
-	}
-	while (my $v = readlink "$o->{prefix}/$e->{initrd}") {
-	    $v = "/boot/$v" if $v !~ m|^/|; -e "$o->{prefix}$v" or last;
-	    log::l("renaming /boot/$e->{initrd} entry by $v");
-	    $e->{initrd} = $v;
-	}
-    }
-}
-
-sub setupBootloaderBefore {
-    my ($o) = @_;
-    if (arch() =~ /alpha/) {
-	if (my $dev = fsedit::get_root($o->{fstab})) {
-	    $o->{bootloader}{boot} ||= "/dev/$dev->{rootDevice}";
-	    $o->{bootloader}{root} ||= "/dev/$dev->{device}";
-	    $o->{bootloader}{part_nb} ||= first($dev->{device} =~ /(\d+)/);
-	}
-    } else {
-	#- check for valid fb mode to enable a default boot with frame buffer.
-	my $vga = $o->{allowFB} && (!detect_devices::matching_desc('3D Rage LT') &&
-				    !detect_devices::matching_desc('Rage Mobility [PL]') &&
-				    !detect_devices::matching_desc('i740') &&
-				    !detect_devices::matching_desc('Matrox') &&
-				    !detect_devices::matching_desc('Tseng.*ET6\d00') &&
-				    !detect_devices::matching_desc('SiS.*SG86C2.5') &&
-				    !detect_devices::matching_desc('SiS.*559[78]') &&
-				    !detect_devices::matching_desc('SiS.*300') &&
-				    !detect_devices::matching_desc('SiS.*540') &&
-				    !detect_devices::matching_desc('SiS.*6C?326') &&
-				    !detect_devices::matching_desc('SiS.*6C?236') &&
-				    !detect_devices::matching_desc('Voodoo [35]|Voodoo Banshee') #- 3d acceleration seems to bug in fb mode
-				   );
-	my $force_vga = $o->{allowFB} && (detect_devices::matching_desc('SiS.*630') #- SiS 630 need frame buffer.
-					 );
-
-	require bootloader;
-	#- propose the default fb mode for kernel fb, if aurora is installed too.
-	my $has_aurora = do {
-	    my $p = pkgs::packageByName($o->{packages}, 'Aurora');
-	    $p && pkgs::packageFlagInstalled($p);
-	};
-        bootloader::suggest($o->{prefix}, $o->{bootloader}, $o->{all_hds}{hds}, $o->{fstab}, install_any::kernelVersion($o),
-			    ($force_vga || $vga && $has_aurora) && $o->{vga});
-	bootloader::suggest_floppy($o->{bootloader}) if $o->{security} <= 3 && arch() !~ /ppc/;
-
-	$o->{bootloader}{keytable} ||= keyboard::keyboard2kmap($o->{keyboard});
-    }
-}
-
-sub setupBootloader($) {
-    my ($o) = @_;
-    return if $::g_auto_install;
-
-    if (arch() =~ /alpha/) {
-	return if $::testing;
-	my $b = $o->{bootloader};
-	$b->{boot} or $o->ask_warn('', "Can't install aboot, not a bsd disklabel"), return;
-		
-	run_program::rooted($o->{prefix}, "swriteboot", $b->{boot}, "/boot/bootlx") or do {
-	    cdie "swriteboot failed";
-	    run_program::rooted($o->{prefix}, "swriteboot", "-f1", $b->{boot}, "/boot/bootlx");
-	};
-	run_program::rooted($o->{prefix}, "abootconf", $b->{boot}, $b->{part_nb});
- 
-        modules::load('loop');
-	output "$o->{prefix}/etc/aboot.conf", 
-	map_index { -e "$o->{prefix}/boot/initrd-$_->[1]" ? 
-			    "$::i:$b->{part_nb}$_->[0] root=$b->{root} initrd=/boot/initrd-$_->[1] $b->{perImageAppend}\n" :
-			    "$::i:$b->{part_nb}$_->[0] root=$b->{root} $b->{perImageAppend}\n" }
-	map { run_program::rooted($o->{prefix}, "mkinitrd", "-f", "/boot/initrd-$_->[1]", "--ifneeded", $_->[1]) ;#or
-	  #unlink "$o->{prefix}/boot/initrd-$_->[1]";$_ } grep { $_->[0] && $_->[1] }
-	  $_ } grep { $_->[0] && $_->[1] }
-	map { [ m|$o->{prefix}(/boot/vmlinux-(.*))| ] } glob_("$o->{prefix}/boot/vmlinux-*");
-#	output "$o->{prefix}/etc/aboot.conf", 
-#	  map_index { "$::i:$b->{part_nb}$_ root=$b->{root} $b->{perImageAppend}\n" }
-#	    map { /$o->{prefix}(.*)/ } eval { glob_("$o->{prefix}/boot/vmlinux*") };
-    } else {
-	require bootloader;
-	bootloader::install($o->{prefix}, $o->{bootloader}, $o->{fstab}, $o->{all_hds}{hds});
-    }
-}
-
-#------------------------------------------------------------------------------
-sub configureXBefore {
-    my ($o) = @_;
-    my $xkb = $o->{X}{keyboard}{xkb_keymap} || keyboard::keyboard2xkb($o->{keyboard});
-    $xkb = '' if !($xkb && $xkb =~ /([^(]*)/ && -e "$o->{prefix}/usr/X11R6/lib/X11/xkb/symbols/$1");
-    if (!$xkb && (my $f = keyboard::xmodmap_file($o->{keyboard}))) {
-	cp_af($f, "$o->{prefix}/etc/X11/xinit/Xmodmap");	
-	$xkb = '';
-    }
-    {
-	my $f = "$o->{prefix}/etc/sysconfig/i18n";
-	setVarsInSh($f, add2hash_({ XKB_IN_USE => $xkb ? '': 'no' }, { getVarsFromSh($f) }));
-    }
-    $o->{X}{keyboard}{xkb_keymap} = $xkb;
-    $o->{X}{mouse} = $o->{mouse};
-    $o->{X}{wacom} = $o->{wacom};
-
-    require Xconfig;
-    Xconfig::getinfoFromDDC($o->{X});
-    Xconfig::getinfoFromXF86Config($o->{X}, $o->{prefix}); #- take default from here at least.
-
-    #- keep this here if the package has to be updated.
-    $o->pkg_install("XFree86");
-}
-sub configureX {
-    my ($o) = @_;
-    $o->configureXBefore;
-
-    require Xconfigurator;
-    require class_discard;
-    { local $::testing = 0; #- unset testing
-      local $::auto = 1;
-      $o->{X}{skiptest} = 1;
-      Xconfigurator::main($o->{prefix}, $o->{X}, class_discard->new, $o->do_pkgs,
-			  { allowFB          => $o->{allowFB},
-			    allowNVIDIA_rpms => install_any::allowNVIDIA_rpms($o->{packages}),
-			  });
-    }
-    $o->configureXAfter;
-}
-sub configureXAfter {
-    my ($o) = @_;
-    if ($o->{X}{card}{server} eq 'FBDev') {
-	unless (install_any::setupFB($o, Xconfigurator::getVGAMode($o->{X}))) {
-	    log::l("disabling automatic start-up of X11 if any as setup framebuffer failed");
-	    any::runlevel($o->{prefix}, 3) unless $::testing; #- disable automatic start-up of X11 on error.
-	}
-    }
-    if ($o->{X}{default_depth} >= 16 && $o->{X}{card}{default_wres} >= 1024) {
-	log::l("setting large icon style for kde");
-	install_any::kderc_largedisplay($o->{prefix});
-    }
-}
-
-#------------------------------------------------------------------------------
-sub miscellaneousBefore {
-    my ($o) = @_;
-
-    my %s = getVarsFromSh("$o->{prefix}/etc/sysconfig/system");
-    $o->{miscellaneous}{HDPARM} ||= $s{HDPARM} if exists $s{HDPARM};
-    $o->{security} ||= $s{SECURITY} if exists $s{SECURITY};
-
-    $ENV{SECURE_LEVEL} = $o->{security};
-    add2hash_ $o, { useSupermount => 0 && $o->{security} < 4 && arch() !~ /sparc/ && !$::corporate };
-
-    add2hash_($o->{miscellaneous} ||= {}, { numlock => !$o->{pcmcia} });
-}
-sub miscellaneous {
-    my ($o) = @_;
-
-    local $_ = $o->{bootloader}{perImageAppend};
-
-    if (my @l = detect_devices::IDEburners() and !/ide-scsi/) {
-	$_ .= " " . join(" ", (map { "$_->{device}=ide-scsi" } @l), 
-			 #- in that case, also add ide-floppy otherwise ide-scsi will be used!
-			 map { "$_->{device}=ide-floppy" } detect_devices::ide_zips());
-    }
-    if ($o->{miscellaneous}{HDPARM}) {
-	$_ .= join('', map { " $_=autotune" } grep { /ide.*/ } all("/proc/ide")) if !/ide.=autotune/;
-    }
-    #- keep some given parameters
-    #-TODO
-
-    log::l("perImageAppend: $_");
-    $o->{bootloader}{perImageAppend} = $_;
-}
-
-#------------------------------------------------------------------------------
-sub exitInstall { 
-    my ($o) = @_;
-    eval { output "$o->{prefix}/root/report.bug", install_any::report_bug($o->{prefix}) };
-    install_any::getAndSaveAutoInstallFloppy($o, 1, "$o->{prefix}/root/replay_install.img");
-    install_any::unlockCdrom;
-    install_any::log_sizes($o);
-}
-
-#------------------------------------------------------------------------------
-sub hasNetwork {
-    my ($o) = @_;
-
-    $o->{intf} && $o->{netc}{NETWORKING} ne 'no' || $o->{netcnx}{modem};
-}
-
-#------------------------------------------------------------------------------
-sub upNetwork {
-    my ($o, $pppAvoided) = @_;
-
-    foreach (qw(resolv.conf protocols services)) {
-	symlinkf("$o->{prefix}/etc/$_", "/etc/$_");
-    }
-
-    modules::write_conf($o->{prefix});
-    if ($o->{intf} && $o->{netc}{NETWORKING} ne 'no') {
-	network::up_it($o->{prefix}, $o->{intf});
-    } elsif (!$pppAvoided && $o->{netcnx}{modem} && !$o->{netcnx}{modem}{isUp}) {
-	eval { modules::load_multi(qw(serial ppp bsd_comp ppp_deflate)) };
-	run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/syslog", "start");
-	run_program::rooted($o->{prefix}, "ifup", "ppp0");
-	$o->{netcnx}{modem}{isUp} = 1;
-    } else {
-	$::testing or return;
-    }
-    1;
-}
-
-#------------------------------------------------------------------------------
-sub downNetwork {
-    my ($o, $pppOnly) = @_;
-
-    modules::write_conf($o->{prefix});
-    if (!$pppOnly && $o->{intf} && $o->{netc}{NETWORKING} ne 'no') {
-	network::down_it($o->{prefix}, $o->{intf});
-    } elsif ($o->{netcnx}{modem} && $o->{netcnx}{modem}{isUp}) {
-	run_program::rooted($o->{prefix}, "ifdown", "ppp0");
-	run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/syslog", "stop");
-	eval { modules::unload($_) foreach qw(ppp_deflate bsd_comp ppp serial) };
-	$o->{netcnx}{modem}{isUp} = 0;
-    } else {
-	$::testing or return;
-    }
-    1;
-}
-
-#------------------------------------------------------------------------------
-sub cleanIfFailedUpgrade($) {
-    my ($o) = @_;
-
-    #- if an upgrade has failed, there should be .mdkgisave files around.
-    if ($o->{isUpgrade}) {
-	foreach (@filesToSaveForUpgrade) {
-	    if (-e "$o->{prefix}/$_" && -e "$o->{prefix}/$_.mdkgisave") {
-		rename "$o->{prefix}/$_", "$o->{prefix}/$_.mdkginew"; #- keep new files around in case !
-		rename "$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_";
-	    }
-	}
-    }
-}
-
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/install_steps_auto_install.pm b/perl-install/install_steps_auto_install.pm
deleted file mode 100644
index d81675b31..000000000
--- a/perl-install/install_steps_auto_install.pm
+++ /dev/null
@@ -1,112 +0,0 @@
-package install_steps_auto_install; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA $graphical @graphical_steps);
-
-@ISA = qw(install_steps);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use install_steps;
-
-sub new {
-    my ($type, $o) = @_;
-
-    # Handle legacy options
-    $o->{interactive} ||= 'gtk' if $graphical || !is_empty_array_ref($o->{interactiveSteps});
-    $o->{interactiveSteps} ||= [ @graphical_steps ];
-    push @{$o->{interactiveSteps}}, qw(installPackages exitInstall);
-
-    if ($o->{interactive}) {
-        my $interactiveClass = "install_steps_$o->{interactive}";
-	require"$interactiveClass.pm"; #- no space to skip perl2fcalls
-
-	@ISA = ($interactiveClass, @ISA);
-
-	for (my $f = $o->{steps}{first}; $f; $f = $o->{steps}{$f}{next}) {
-	    my $auto_name = member($f, @{$o->{interactiveSteps}}) ? 'noauto' : 'auto';
-	    $o->{steps}{$f}{$auto_name} = 1;
-	}
-
-	goto &{$::{$interactiveClass . "::"}{new}};
-    } else {
-	@ISA = ('install_steps_auto_install_non_interactive', @ISA);
-	(bless {}, ref $type || $type)->install_steps::new($o);
-    }
-}
-
-
-sub exitInstall {
-    my ($o, $alldone) = @_;
-    return if $o->{autoExitInstall};
-
-    if ($o->{interactive}) {
-	$o->SUPER::exitInstall($alldone);
-    } else {
-	install_steps::exitInstall($o);
-	print "\a";
-	print "Auto installation complete (the postInstall is not done yet though)\n";
-	print "Press <Enter> to reboot\n";
-	<STDIN>;
-    }
-}
-
-
-#-######################################################################################
-#- install_steps_auto_install_non_interactive package
-#-######################################################################################
-package install_steps_auto_install_non_interactive;
-
-use install_steps;
-use lang;
-use modules;
-use common;
-use log;
-
-sub configureNetwork {
-    my ($o) = @_;
-    modules::load_thiskind('net');
-    goto &install_steps::configureNetwork;
-}
-
-sub enteringStep {
-    my ($o, $step) = @_;
-    my ($s, $t) = (__("Entering step `%s'\n"), $o->{steps}{$step}{text});
-    ($s, $t) = (translate($s), translate($t)) if $ENV{LANG} !~ /ja|ko|zh/;
-    print sprintf($s, $t);
-    $o->install_steps::enteringStep($step);
-}
-
-sub ask_warn {
-    log::l(ref $_[1] ? join " ", @{$_[1]} : $_[1]);
-}
-
-sub wait_message {}
-
-sub errorInStep {
-    print "error :(\n"; 
-    print "switch to console f2 for a shell\n";
-    print "Press <Enter> to reboot\n";
-    <STDIN>;
-    c::_exit(0);
-}
-
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-sub selectLanguage {
-    my ($o) = @_;
-    $o->install_steps::selectLanguage;
-    lang::load_console_font($o->{lang});
-}
-
-sub installPackages {
-    my ($o, $packages) = @_;
-    catch_cdie { $o->install_steps::installPackages($packages) } sub { print "$@\n"; 1 }
-}
-
-1;
diff --git a/perl-install/install_steps_gtk.pm b/perl-install/install_steps_gtk.pm
deleted file mode 100644
index f3edb9923..000000000
--- a/perl-install/install_steps_gtk.pm
+++ /dev/null
@@ -1,647 +0,0 @@
-package install_steps_gtk; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(install_steps_interactive interactive_gtk);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use install_steps_interactive;
-use interactive_gtk;
-use common;
-use my_gtk qw(:helpers :wrappers);
-use Gtk;
-use devices;
-use modules;
-use install_gtk;
-use install_any;
-use mouse;
-use help;
-use log;
-
-#-######################################################################################
-#- In/Out Steps Functions
-#-######################################################################################
-sub new($$) {
-    my ($type, $o) = @_;
-
-    my $old = $SIG{__DIE__};
-    $SIG{__DIE__} = sub { $_[0] !~ /my_gtk\.pm/ and goto $old };
-
-    $ENV{DISPLAY} ||= $o->{display} || ":0";
-    unless ($::testing) {
-	if ($ENV{DISPLAY} eq ":0" && !$::live) {
-	    my $f = "/tmp/Xconf";
-	    install_gtk::createXconf($f, @{$o->{mouse}}{"XMOUSETYPE", "device"}, $o->{wacom}[0]);
-	    devices::make("/dev/kbd");
-
-	    local (*T1, *T2);
-	    open T1, ">/dev/tty5";
-	    open T2, ">/dev/tty6";
-
-	    my $launchX = sub {
-		my $ok = 1;
-		my $xpmac_opts = cat_("/proc/cmdline");
-		unless (-d "/var/log" ) { mkdir("/var/log"); }
-		local $SIG{CHLD} = sub { $ok = 0 if waitpid(-1, c::WNOHANG()) > 0 };
-		unless (fork) {
-		    exec $_[0], (arch() =~ /^sparc/ || arch() eq "ppc" ? () : ("-kb")), "-dpms","-s" ,"240",
-		      ($_[0] =~ /Xpmac/ ? $xpmac_opts !~ /ofonly/ ? ("-mode", "17", "-depth", "32") : ("-mach64"):()),
-		      ($_[0] =~ /Xsun/ || $_[0] =~ /Xpmac/ ? ("-fp", "/usr/X11R6/lib/X11/fonts:unscaled") :
-		       ("-allowMouseOpenFail", "-xf86config", $f)) or exit 1;
-		}
-		foreach (1..60) {
-		    sleep 1;
-		    log::l("Server died"), return 0 if !$ok;
-		    if (c::Xtest($ENV{DISPLAY})) {
-			fork || exec("aewm-drakx") || exec("true");
-			return 1;
-		    }
-		}
-		log::l("Timeout!!");
-		0;
-	    };
-	    my @servers = qw(FBDev VGA16); #-)
-	    if (arch() eq "alpha") {
-		require Xconfigurator;
-		my $card = Xconfigurator::cardConfigurationAuto();
-		Xconfigurator::updateCardAccordingName($card, $card->{type}) if $card && $card->{type};
-		@servers = $card->{server} || "TGA";
-		#-@servers = qw(SVGA 3DLabs TGA) 
-	    } elsif (arch() =~ /^sparc/) {
-		local $_ = cat_("/proc/fb");
-		if (/Mach64/) { @servers = qw(Mach64) }
-		elsif (/Permedia2/) { @servers = qw(3DLabs) }
-		else { @servers = qw(Xsun24) }
-	    } elsif (arch() =~ /ia64/) {
-		@servers= 'XFree86';
-	    } elsif (arch() eq "ppc") {
-	    	@servers = qw(Xpmac);
-            }
-
-	    foreach (@servers) {
-		log::l("Trying with server $_");
-		my $dir = "/usr/X11R6/bin";
-		my $prog = /Xsun|Xpmac|XFree86/ ? $_ : "XF86_$_";
-		unless (-x "$dir/$prog") {
-		    unlink $_ foreach glob_("$dir/X*");
-		    install_any::getAndSaveFile("Mandrake/mdkinst$dir/$prog", "$dir/$prog") or die "failed to get server $prog: $!";
-		    chmod 0755, "$dir/$prog";
-		}
-		if (/FB/) {
-		    !$o->{vga16} && $o->{allowFB} or next;
-
-		    $o->{allowFB} = &$launchX($prog) #- keep in mind FB is used.
-		      and goto OK;
-		} else {
-		    $o->{vga16} = 1 if /VGA16/;
-		    &$launchX($prog) and goto OK;
-		}
-	    }
-	    return undef;
-	}
-    }
-  OK:
-    install_gtk::init_sizes();
-    install_gtk::default_theme($o);
-    install_gtk::create_logo_window($o);
-
-    $my_gtk::force_center = [ $::rootwidth - $::windowwidth, $::logoheight, $::windowwidth, $::windowheight ];
-
-    $o = (bless {}, ref $type || $type)->SUPER::new($o);
-    $o->interactive_gtk::new;
-    $o;
-}
-
-sub enteringStep {
-    my ($o, $step) = @_;
-
-    printf "Entering step `%s'\n", $o->{steps}{$step}{text};
-    $o->SUPER::enteringStep($step);
-    install_gtk::create_steps_window($o);
-    install_gtk::create_help_window($o);
-}
-sub leavingStep {
-    my ($o, $step) = @_;
-    $o->SUPER::leavingStep($step);
-}
-
-
-sub charsetChanged {
-    my ($o) = @_;
-    Gtk->set_locale;
-    install_gtk::install_theme($o);
-    install_gtk::create_steps_window($o);
-}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-sub selectLanguage {
-    my ($o, $first_time) = @_;
-    $o->SUPER::selectLanguage;
-  
-    $o->ask_warn('',
-_("Your system is low on resource. You may have some problem installing
-Mandrake Linux. If that occurs, you can try a text install instead. For this,
-press `F1' when booting on CDROM, then enter `text'.")) if $first_time && availableRamMB() < 60; # 60MB
-
-}
-
-#------------------------------------------------------------------------------
-sub selectInstallClass1 {
-    my ($o, $verif, $l, $def, $l2, $def2) = @_;
-    $::live || @$l == 1 and return $o->SUPER::selectInstallClass1($verif, $l, $def, $l2, $def2);
-
-    my $w = my_gtk->new(_("Install Class"));
-    my $focused;
-    gtkadd($w->{window},
-	   gtkpack($w->create_box_with_title(_("Please, choose one of the following classes of installation:")),
-		   (my @radios = gtkradio($def, @$l)),
-		   gtkadd(create_hbox(),
-			  map { my $v = $_; 
-				my $b = new Gtk::Button(translate($_));
-				$focused = $b if $_ eq $def2;
-				gtksignal_connect($b, "clicked" => sub { $w->{retval} = $v; Gtk->main_quit });
-			    } @$l2)
-		  ));
-    $focused->grab_focus if $focused;
-    $w->main;
-
-    mapn { $verif->($_[1]) if $_[0]->active } \@radios, $l;
-    install_gtk::create_steps_window($o);
-
-    $w->{retval};
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse {
-    my ($o, $force) = @_;
-    my %old = %{$o->{mouse}};
-    $o->SUPER::selectMouse($force) or return;
-    my $mouse = $o->{mouse};
-    $mouse->{type} eq 'none' ||
-      $old{type}   eq $mouse->{type}   && 
-      $old{name}   eq $mouse->{name}   &&
-      $old{device} eq $mouse->{device} && !$force and return;
-
-    local $my_gtk::grab = 1; #- unsure a crazy mouse don't go wild clicking everywhere
-
-    while (1) {
-	log::l("telling X server to use another mouse");
-	eval { modules::load('serial') } if $mouse->{device} =~ /ttyS/;
-
-	if (!$::testing) {
-	    devices::make($mouse->{device});
-	    symlinkf($mouse->{device}, "/dev/mouse");
-	    c::setMouseLive($ENV{DISPLAY}, mouse::xmouse2xId($mouse->{XMOUSETYPE}), $mouse->{nbuttons} < 3);
-	}
-	mouse::test_mouse_install($mouse) and return;
-	$o->SUPER::selectMouse(1);
-	$mouse = $o->{mouse};
-    } 
-}
-
-#------------------------------------------------------------------------------
-sub chooseSizeToInstall {
-    my ($o, $packages, $min_size, $def_size, $max_size_, $availableC, $individual) = @_;
-    my $max_size = min($max_size_, $availableC);
-    my $enough = $max_size == $max_size_;
-    my $percentage = int 100 * $max_size / $max_size_;
-
-    #- don't ask anything if the difference between min and max is too small
-    log::l("chooseSizeToInstall: min_size=$min_size, def_size=$def_size, max_size=$max_size_, available=$availableC");
-    return $max_size if $min_size && $max_size / $min_size < 1.05;
-
-    log::l("choosing size to install between $min_size and $max_size");
-    my $w = my_gtk->new('');
-    my $adj = create_adjustment(int(100 * $def_size / $max_size_), $min_size * 100 / $max_size_, $percentage);
-    my $spin = gtkset_usize(new Gtk::SpinButton($adj, 0, 0), 20, 0);
-    my $val;
-
-    require pkgs;
-    gtkadd($w->{window},
-	  gtkpack(new Gtk::VBox(0,20),
-		  _("The total size for the groups you have selected is approximately %d MB.\n", pkgs::correctSize($max_size_ / sqr(1024))) .
-		  ($enough ?
-_("If you wish to install less than this size,
-select the percentage of packages that you want to install.
-
-A low percentage will install only the most important packages;
-a percentage of 100%% will install all selected packages.") : 
-_("You have space on your disk for only %d%% of these packages.
-
-If you wish to install less than this,
-select the percentage of packages that you want to install.
-A low percentage will install only the most important packages;
-a percentage of %d%% will install as many packages as possible.", $percentage, $percentage))
-. ($individual ? "\n\n" . _("You will be able to choose them more specifically in the next step.") : ''),
-		 create_packtable({},
-				  [ _("Percentage of packages to install") . '  ', $spin, "%", my $mb = new Gtk::Label ],
-				  [ undef, new Gtk::HScrollbar($adj) ],
-			       ),
-		 create_okcancel($w)
-		)
-	 );
-    $spin->signal_connect(changed => my $changed = sub { 
-	$val = $spin->get_value_as_int / 100 * $max_size_;
-	$mb->set(sprintf("(%dMB)", pkgs::correctSize($val / sqr(1024)))); 
-    }); &$changed();
-    $spin->signal_connect(activate => sub { $w->{retval} = 1; Gtk->main_quit });
-    $spin->grab_focus();
-    $w->main and $val + 1; #- add a single byte (hack?) to make selection of 0 bytes ok.
-}
-
-sub reallyChooseGroups {
-    my ($o, $size_to_display, $individual, $val) = @_;
-
-    my $w = my_gtk->new('');
-    my $tips = new Gtk::Tooltips;
-    my $w_size = new Gtk::Label(&$size_to_display);
-
-    my $entry = sub {
-	my ($e) = @_;
-	my $text = translate($o->{compssUsers}{$e}{label});
-	my $help = translate($o->{compssUsers}{$e}{descr});
-
-	my $file = do {
-	    my $f = "$ENV{SHARE_PATH}/icons/" . ($o->{compssUsers}{$e}{icons} || 'default');
-	    -e "$f.png" or $f .= "_section";
-	    -e "$f.png" or $f = "$ENV{SHARE_PATH}/icons/default_section";
-	    "$f.png";
-	};
-	my $check = Gtk::CheckButton->new($text);
-	$check->set_active($val->{$e});
-	$check->signal_connect(clicked => sub { 
-	    $val->{$e} = $check->get_active;
-	    $w_size->set(&$size_to_display);
-	});
-	gtkset_tip($tips, $check, $help);
-	gtkpack_(new Gtk::HBox(0,0), 0, gtkpng($file), 1, $check);
-	#$check;
-    };
-    my $entries_in_path = sub {
-	my ($path) = @_;
-	translate($path), map { $entry->($_) } grep { !/Utilities/ && $o->{compssUsers}{$_}{path} eq $path } @{$o->{compssUsersSorted}};
-    };
-    gtkadd($w->{window},
-	   gtkpack($w->create_box_with_title(_("Package Group Selection")),
-		   gtkpack_(new Gtk::VBox(0,0),
-			   1, gtkpack_(new Gtk::HBox(0,0),
-			        $o->{meta_class} eq 'server' ? (
-				   1, gtkpack(new Gtk::VBox(0,0), 
-					   $entries_in_path->('Server'),
-					  ),
-				   1, gtkpack(new Gtk::VBox(0,0), 
-					   $entry->('Development|Development'),
-					   $entry->('Development|Documentation'),
-					   '',
-					   $entries_in_path->('Graphical Environment'),
-					  ),
-				) : (
-				   1, gtkpack(new Gtk::VBox(0,0), 
-					   $entries_in_path->('Workstation'),
-					   '',
-					   $entry->('Development|Development'),
-					   $entry->('Development|Documentation'),
-					  ),
-				   0, gtkpack(new Gtk::VBox(0,0), 
-					   $entries_in_path->('Server'),
-					   '',
-					   $entries_in_path->('Graphical Environment'),
-					  ),
-				),
-			   )),
-		   '',
-		   gtkadd(new Gtk::HBox(0,0),
-			  $w_size,
-			  if_($individual, do {
-			      my $check = Gtk::CheckButton->new(_("Individual package selection"));
-			      $check->set_active($$individual);
-			      $check->signal_connect(clicked => sub { $$individual = $check->get_active });
-			      $check;
-			  }),
-			  gtksignal_connect(new Gtk::Button(_("Ok")), clicked => sub { Gtk->main_quit }),
-			 ),
-		  ),
-	  );
-    $w->{rwindow}->set_default_size($::windowwidth * 0.8, $::windowheight * 0.8);
-    $w->main;
-    1;    
-}
-
-
-sub choosePackagesTree {
-    my ($o, $packages) = @_;
-
-    my $available = install_any::getAvailableSpace($o);
-    my $availableCorrected = pkgs::invCorrectSize($available / sqr(1024)) * sqr(1024);
-
-    my $common; $common = { get_status => sub {
-				my $size = pkgs::selectedSize($packages);
-				_("Total size: %d / %d MB", pkgs::correctSize($size / sqr(1024)), $available / sqr(1024));
-			    },
-			    node_state => sub {
-				my $p = pkgs::packageByName($packages,$_[0]) or return;
-				pkgs::packageMedium($packages, $p)->{selected} or return;
-				pkgs::packageFlagBase($p) and return 'base';
-				pkgs::packageFlagInstalled($p) and return 'installed';
-				pkgs::packageFlagSelected($p) and return 'selected';
-				return 'unselected';
-			    },
-			    build_tree => sub {
-				my ($add_node, $flat) = @_;
-				if ($flat) {
-				    foreach (sort keys %{$packages->{names}}) {
-					$add_node->($_, undef);
-				    }
-				} else {
-				    foreach my $root (@{$o->{compssUsersSorted}}) {
-					my (%fl, @firstchoice, @others);
-					#$fl{$_} = $o->{compssUsersChoice}{$_} foreach @{$o->{compssUsers}{$root}{flags}}; #- FEATURE:improve choce of packages...
-					$fl{$_} = 1 foreach @{$o->{compssUsers}{$root}{flags}};
-					foreach my $p (values %{$packages->{names}}) {
-					    my ($rate, @flags) = pkgs::packageRateRFlags($p);
-					    next if !($rate && grep { grep { !/^!/ && $fl{$_} } split('\|\|') } @flags);
-					    $rate >= 3 ?
-					      push(@firstchoice, pkgs::packageName($p)) :
-						push(@others,      pkgs::packageName($p));
-					}
-					my $root2 = join('|', map { translate($_) } split('\|', $root));
-					$add_node->($_, $root2                   ) foreach sort @firstchoice;
-					$add_node->($_, $root2 . '|' . _("Other")) foreach sort @others;
-				    }
-				}
-			    },
-			    get_info => sub {
-				my $p = pkgs::packageByName($packages, $_[0]) or return '';
-				pkgs::extractHeaders($o->{prefix}, [$p], pkgs::packageMedium($packages, $p));
-				pkgs::packageHeader($p) or die;
-
-				my $imp = translate($pkgs::compssListDesc{pkgs::packageFlagBase($p) ?
-									  5 : pkgs::packageRate($p)});
-
-				my $info = $@ ? _("Bad package") :
-				  (_("Name: %s\n", pkgs::packageName($p)) .
-				   _("Version: %s\n", pkgs::packageVersion($p) . '-' . pkgs::packageRelease($p)) .
-				   _("Size: %d KB\n", pkgs::packageSize($p) / 1024) .
-				   ($imp && _("Importance: %s\n", $imp)) . "\n" .
-				   formatLines(c::headerGetEntry(pkgs::packageHeader($p), 'description')));
-				pkgs::packageFreeHeader($p);
-				return $info;
-			    },
-			    toggle_nodes => sub {
-				my $set_state = shift @_;
-				my @n = map { pkgs::packageByName($packages, $_) } @_;
-				my %l;
-				my $isSelection = !pkgs::packageFlagSelected($n[0]);
-				foreach (@n) {
-				    pkgs::togglePackageSelection($packages, $_, my $l = {});
-				    @l{grep {$l->{$_}} keys %$l} = ();
-				}
-				if (my @l = keys %l) {
-				    #- check for size before trying to select.
-				    my $size = pkgs::selectedSize($packages);
-				    foreach (@l) {
-					my $p = $packages->{names}{$_};
-					pkgs::packageFlagSelected($p) or $size += pkgs::packageSize($p);
-				    }
-				    if (pkgs::correctSize($size / sqr(1024)) > $available / sqr(1024)) {
-					return $o->ask_warn('', _("You can't select this package as there is not enough space left to install it"));
-				    }
-
-				    @l > @n && $common->{state}{auto_deps} and
-				      $o->ask_okcancel('', [ $isSelection ? 
-							     _("The following packages are going to be installed") :
-							     _("The following packages are going to be removed"),
-							     common::formatList(20, sort @l) ], 1) || return;
-				    if ($isSelection) {
-					pkgs::selectPackage($packages, $_) foreach @n;
-				    } else {
-					pkgs::unselectPackage($packages, $_) foreach @n;
-				    }
-				    foreach (@l) {
-					my $p = pkgs::packageByName($packages, $_);
-					$set_state->($_, pkgs::packageFlagSelected($p) ? 'selected' : 'unselected');
-				    }
-				} else {
-				    $o->ask_warn('', _("You can't select/unselect this package"));
-				}
-			    },
-			    grep_allowed_to_toggle => sub {
-				grep { $_ ne _("Other") && !pkgs::packageFlagBase(pkgs::packageByName($packages, $_)) } @_;
-			    },
-			    grep_unselected => sub {
-				grep { !pkgs::packageFlagSelected(pkgs::packageByName($packages, $_)) } @_;
-			    },
-			    check_interactive_to_toggle => sub {
-				my $p = pkgs::packageByName($packages, $_[0]) or return;
-				if (pkgs::packageFlagBase($p)) {
-				    $o->ask_warn('', _("This is a mandatory package, it can't be unselected"));
-				} elsif (pkgs::packageFlagInstalled($p)) {
-				    $o->ask_warn('', _("You can't unselect this package. It is already installed"));
-				} elsif (pkgs::packageFlagUpgrade($p)) {
-				    if ($::expert) {
-					if (pkgs::packageFlagSelected($p)) {
-					    $o->ask_yesorno('', _("This package must be upgraded\nAre you sure you want to deselect it?")) or return;
-					}
-					return 1;
-				    } else {
-					$o->ask_warn('', _("You can't unselect this package. It must be upgraded"));
-				    }
-				} else { return 1; }
-				return;
-			    },
-			    auto_deps => _("Show automatically selected packages"),
-			    ok => _("Install"),
-			    cancel => undef,
-			    icons => [ { icon         => 'floppy',
-					 help         => _("Load/Save on floppy"),
-					 wait_message => _("Updating package selection"),
-					 code         => sub { $o->loadSavePackagesOnFloppy($packages); 1; },
-				       }, 
-				       if_(0, 
-				       { icon         => 'feather',
-					 help         => _("Minimal install"),
-					 code         => sub {
-					     
-					     install_any::unselectMostPackages($o);
-					     pkgs::setSelectedFromCompssList($packages, { SYSTEM => 1 }, 4, $availableCorrected);
-					     1;
-					 } }),
-				     ],
-			    state => {
-				      auto_deps => 1,
-				      flat      => 0,
-				     },
-			  };
-
-    $o->set_help('choosePackagesTree');
-    $o->ask_browse_tree_info('', _("Choose the packages you want to install"), $common);
-}
-
-#------------------------------------------------------------------------------
-sub beforeInstallPackages {
-    my ($o) = @_;    
-    $o->SUPER::beforeInstallPackages;
-    install_any::copy_advertising($o);
-}
-
-#------------------------------------------------------------------------------
-sub installPackages {
-    my ($o, $packages) = @_;
-
-    my ($current_total_size, $last_size, $nb, $total_size, $start_time, $last_dtime, $trans_progress_total);
-
-    my $w = my_gtk->new(_("Installing"));
-    $w->sync;
-    my $text = new Gtk::Label;
-    my ($advertising, $change_time, $i);
-    my $show_advertising if 0;
-    $show_advertising = to_bool(@install_any::advertising_images) if !defined $show_advertising;
-    my ($msg, $msg_time_remaining, $msg_time_total) = map { new Gtk::Label($_) } '', (_("Estimating")) x 2;
-    my ($progress, $progress_total) = map { new Gtk::ProgressBar } (1..2);
-    $w->{rwindow}->set_policy(1, 1, 1);
-    gtkadd($w->{window}, my $box = new Gtk::VBox(0,10));
-    $box->pack_end(gtkshow(gtkpack(gtkset_usize(new Gtk::VBox(0,5), $::windowwidth * 0.8, 0),
-			   $msg, $progress,
-			   create_packtable({},
-					    [_("Time remaining "), $msg_time_remaining],
-#					    [_("Total time "), $msg_time_total],
-					   ),
-			   $text,
-			   $progress_total,
-			   gtkadd(create_hbox(),
-				  my $cancel = new Gtk::Button(_("Cancel")),
-				  my $details = new Gtk::Button(_("Details")),
-				  ),
-			  )), 0, 1, 0);
-    $details->hide if !@install_any::advertising_images;
-    $w->sync;
-    $msg->set(_("Please wait, preparing installation"));
-    gtkset_mousecursor_normal($cancel->window);
-    gtkset_mousecursor_normal($details->window);
-    my $advertize = sub {
-	@install_any::advertising_images or return;
-	$show_advertising ? $_->hide : $_->show foreach $msg, $progress, $text;
-	gtkdestroy($advertising) if $advertising;
-	if ($show_advertising && $_[0]) {
-	    $change_time = time();
-	    my $f = $install_any::advertising_images[$i++ % @install_any::advertising_images];
-	    log::l("advertising $f");
-	    eval { gtkpack($box, $advertising = gtkpng($f)) };
-	} else {
-	    $advertising = undef;
-	}
-    };
-
-    $cancel->signal_connect(clicked => sub { $pkgs::cancel_install = 1 });
-    $details->signal_connect(clicked => sub {
-	invbool \$show_advertising;
-	$advertize->(1);
-    });
-    $advertize->();
-
-    my $oldInstallCallback = \&pkgs::installCallback;
-    local *pkgs::installCallback = sub {
-	my $m = shift;
-	if ($m =~ /^Starting installation/) {
-	    $nb = $_[0];
-	    $total_size = $_[1]; $current_total_size = 0;
-	    $start_time = time();
-	    $msg->set(_("%d packages", $nb));
-	    $w->flush;
-	} elsif ($m =~ /^Starting installing package/) {
-	    $progress->update(0);
-	    my $name = $_[0];
-	    $msg->set(_("Installing package %s", $name));
-	    $current_total_size += $last_size;
-	    my $p = pkgs::packageByName($o->{packages}, $name);
-	    $last_size = c::headerGetEntry(pkgs::packageHeader($p), 'size');
-	    $text->set((split /\n/, c::headerGetEntry(pkgs::packageHeader($p), 'summary'))[0] || '');
-	    $advertize->(1) if $show_advertising && $total_size > 20_000_000 && time() - $change_time > 20;
-	    $w->flush;
-	} elsif ($m =~ /^Progressing installing package/) {
-	    $progress->update($_[2] ? $_[1] / $_[2] : 0);
-
-	    my $dtime = time() - $start_time;
-	    my $ratio = 
-	      $total_size == 0 ? 0 :
-		pkgs::size2time($current_total_size + $_[1], $total_size) / pkgs::size2time($total_size, $total_size);
-	    $ratio >= 1 and $ratio = 1;
-	    my $total_time = $ratio ? $dtime / $ratio : time();
-
-#-	    my $ratio2 = $total_size == 0 ? 0 : ($current_total_size + $_[1]) / $total_size;
-#-	    log::l(sprintf("XXXX advance %d %d %s", $current_total_size + $_[1], $dtime, formatTimeRaw($total_time)));
-
-	    $progress_total->update($ratio);
-	    if ($dtime != $last_dtime && $current_total_size > 80_000_000) {
-		$msg_time_total->set(formatTime(10 * round($total_time / 10) + 10));
-#-		$msg_time_total->set(formatTimeRaw($total_time) . "  " . formatTimeRaw($dtime / $ratio2));
-		$msg_time_remaining->set(formatTime(10 * round(max($total_time - $dtime, 0) / 10) + 10));
-		$last_dtime = $dtime;
-	    }
-	    $w->flush;
-	} else { unshift @_, $m; goto $oldInstallCallback }
-    };
-    #- the modification is not local as the box should be living for other package installation.
-    undef *install_any::changeMedium;
-    *install_any::changeMedium = sub {
-	my ($method, $medium) = @_;
-
-	#- if not using a cdrom medium, always abort.
-	$method eq 'cdrom' && !$::oem and do {
-	    local $my_gtk::grab = 1;
-	    my $name = pkgs::mediumDescr($o->{packages}, $medium);
-	    local $| = 1; print "\a";
-	    my $time = time();
-	    my $r = $name !~ /Application/ || ($o->{useless_thing_accepted2} ||= $o->ask_from_list_('', formatAlaTeX($install_steps_interactive::com_license), [ __("Accept"), __("Refuse") ], "Accept") eq "Accept");
-            $r &&= $o->ask_okcancel('', _("Change your Cd-Rom!
-
-Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.
-If you don't have it, press Cancel to avoid installation from this Cd-Rom.", $name), 1);
-            #- add the elapsed time (otherwise the predicted time will be rubbish)
-            $start_time += time() - $time;
-            return $r;
-	};
-    };
-    my $install_result;
-    catch_cdie { $install_result = $o->install_steps::installPackages($packages); }
-      sub {
-	  if ($@ =~ /^error ordering package list: (.*)/) {
-	      $o->ask_yesorno('', [
-_("There was an error ordering packages:"), $1, _("Go on anyway?") ], 1) and return 1;
-	      ${$_[0]} = "already displayed";
-	  } elsif ($@ =~ /^error installing package list: (.*)/) {
-	      $o->ask_yesorno('', [
-_("There was an error installing packages:"), $1, _("Go on anyway?") ], 1) and return 1;
-	      ${$_[0]} = "already displayed";
-	  }
-	  0;
-      };
-    if ($pkgs::cancel_install) {
-	$pkgs::cancel_install = 0;
-	die "setstep choosePackages\n";
-    }
-    $w->destroy;
-    $install_result;
-}
-
-sub set_help {
-    my ($o, @l) = @_;
-
-    my @l2 = map { 
-	join("\n\n", map { s/\n/ /mg; $_ } split("\n\n", translate($help::steps{$_})))
-    } @l;
-    $o->{current_help} = join("\n\n\n", @l2);
-    gtktext_insert($o->{help_window_text}, $o->{current_help});
-    1;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm
deleted file mode 100644
index 5ad33d267..000000000
--- a/perl-install/install_steps_interactive.pm
+++ /dev/null
@@ -1,1270 +0,0 @@
-package install_steps_interactive; # $Id$
-
-
-use diagnostics;
-use strict;
-use vars qw(@ISA $new_bootstrap $com_license);
-
-@ISA = qw(install_steps);
-
-$com_license = _("
-Warning
-
-Please read carefully the terms below. If you disagree with any
-portion, you are not allowed to install the next CD media. Press 'Refuse' 
-to continue the installation without using these media.
-
-
-Some components contained in the next CD media are not governed
-by the GPL License or similar agreements. Each such component is then
-governed by the terms and conditions of its own specific license. 
-Please read carefully and comply with such specific licenses before 
-you use or redistribute the said components. 
-Such licenses will in general prevent the transfer,  duplication 
-(except for backup purposes), redistribution, reverse engineering, 
-de-assembly, de-compilation or modification of the component. 
-Any breach of agreement will immediately terminate your rights under 
-the specific license. Unless the specific license terms grant you such
-rights, you usually cannot install the programs on more than one
-system, or adapt it to be used on a network. In doubt, please contact 
-directly the distributor or editor of the component. 
-Transfer to third parties or copying of such components including the 
-documentation is usually forbidden.
-
-
-All rights to the components of the next CD media belong to their 
-respective authors and are protected by intellectual property and 
-copyright laws applicable to software programs.
-");
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table qw(:types);
-use partition_table_raw;
-use install_steps;
-use install_interactive;
-use install_any;
-use detect_devices;
-use run_program;
-use devices;
-use fsedit;
-use loopback;
-use mouse;
-use modules;
-use lang;
-use keyboard;
-use any;
-use fs;
-use log;
-
-#-######################################################################################
-#- In/Out Steps Functions
-#-######################################################################################
-sub errorInStep($$) {
-    my ($o, $err) = @_;
-    $o->ask_warn(_("Error"), [ _("An error occurred"), common::formatError($err) ]);
-}
-
-sub kill_action {
-    my ($o) = @_;
-    $o->kill;
-}
-
-sub charsetChanged {}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-#------------------------------------------------------------------------------
-sub selectLanguage {
-    my ($o) = @_;
-
-    $o->{lang} = any::selectLanguage($o, $o->{lang}, $o->{langs} ||= {});
-    install_steps::selectLanguage($o);
-
-    $o->charsetChanged;
-
-    $o->ask_warn('', formatAlaTeX(
-"If you see this message it is because you choose a language for
-which DrakX does not include a translation yet; however the fact
-that it is listed means there is some support for it anyway.
-
-That is, once GNU/Linux will be installed, you will be able to at
-least read and write in that language; and possibly more (various
-fonts, spell checkers, various programs translated etc. that
-varies from language to language).")) if $o->{lang} !~ /^en/ && !lang::load_mo();
-    
-    unless ($o->{useless_thing_accepted}) {
-	$o->set_help('license');
-	$o->{useless_thing_accepted} = $o->ask_from_list_(_("License agreement"), formatAlaTeX(
-_("Introduction
-
-The operating system and the different components available in the Mandrake Linux distribution 
-shall be called the \"Software Products\" hereafter. The Software Products include, but are not 
-restricted to, the set of programs, methods, rules and documentation related to the operating 
-system and the different components of the Mandrake Linux distribution.
-
-
-1. License Agreement
-
-Please read carefully this document. This document is a license agreement between you and  
-MandrakeSoft S.A. which applies to the Software Products.
-By installing, duplicating or using the Software Products in any manner, you explicitly 
-accept and fully agree to conform to the terms and conditions of this License. 
-If you disagree with any portion of the License, you are not allowed to install, duplicate or use 
-the Software Products. 
-Any attempt to install, duplicate or use the Software Products in a manner which does not comply 
-with the terms and conditions of this License is void and will terminate your rights under this 
-License. Upon termination of the License,  you must immediately destroy all copies of the 
-Software Products.
-
-
-2. Limited Warranty
-
-The Software Products and attached documentation are provided \"as is\", with no warranty, to the 
-extent permitted by law.
-MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,
-incidental, direct or indirect damages whatsoever (including without limitation damages for loss of 
-business, interruption of business, financial loss, legal fees and penalties resulting from a court 
-judgment, or any other consequential loss) arising out of  the use or inability to use the Software 
-Products, even if MandrakeSoft S.A. has been advised of the possibility or occurance of such 
-damages.
-
-LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES
-
-To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be 
-liable for any special, incidental, direct or indirect damages whatsoever (including without 
-limitation damages for loss of business, interruption of business, financial loss, legal fees 
-and penalties resulting from a court judgment, or any other consequential loss) arising out 
-of the possession and use of software components or arising out of  downloading software components 
-from one of Mandrake Linux sites  which are prohibited or restricted in some countries by local laws.
-This limited liability applies to, but is not restricted to, the strong cryptography components 
-included in the Software Products.
-
-
-3. The GPL License and Related Licenses
-
-The Software Products consist of components created by different persons or entities.  Most 
-of these components are governed under the terms and conditions of the GNU General Public 
-Licence, hereafter called \"GPL\", or of similar licenses. Most of these licenses allow you to use, 
-duplicate, adapt or redistribute the components which they cover. Please read carefully the terms 
-and conditions of the license agreement for each component before using any component. Any question 
-on a component license should be addressed to the component author and not to MandrakeSoft.
-The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written 
-by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for 
-further details.
-
-
-4. Intellectual Property Rights
-
-All rights to the components of the Software Products belong to their respective authors and are 
-protected by intellectual property and copyright laws applicable to software programs.
-MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in 
-parts, by all means and for all purposes.
-\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of MandrakeSoft S.A.  
-
-
-5. Governing Laws 
-
-If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this 
-portion is excluded from this contract. You remain bound by the other applicable sections of the 
-agreement.
-The terms and conditions of this License are governed by the Laws of France.
-All disputes on the terms of this license will preferably be settled out of court. As a last 
-resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.
-For any question on this document, please contact MandrakeSoft S.A.  
-")), [ __("Accept"), __("Refuse") ], "Refuse") eq "Accept" or $o->exit;
-    }
-}
-#------------------------------------------------------------------------------
-sub selectKeyboard {
-    my ($o, $clicked) = @_;
-
-    my $l = keyboard::lang2keyboards($o->{lang});
-
-    #- good guess, don't ask
-    return install_steps::selectKeyboard($o) 
-      if !$::expert && !$clicked && $l->[0][1] >= 90;
-
-    my @best = map { $_->[0] } @$l;
-    push @best, 'us_intl' if !member('us_intl', @best);
-
-    my $format = sub { translate(keyboard::keyboard2text($_[0])) };
-    my $other;
-    my $ext_keyboard = $o->{keyboard};
-    $o->ask_from_(
-	{ title => _("Keyboard"), 
-	  messages => _("Please, choose your keyboard layout."),
-	  advanced_messages => _("Here is the full list of keyboards available"),
-	  advanced_label => _("More"),
-	  callbacks => { changed => sub { $other = $_[0]==1 } },
-	},
-	  [ if_(@best > 1, { val => \$o->{keyboard}, type => 'list', format => $format,
-	      list => [ @best ] }),
-	    { val => \$ext_keyboard, type => 'list', format => $format,
-	      list => [ keyboard::keyboards ], advanced => @best > 1 }
-	  ]);
-    delete $o->{keyboard_unsafe};
-
-    $o->{keyboard} = $ext_keyboard if $other;
-    install_steps::selectKeyboard($o);
-}
-#------------------------------------------------------------------------------
-sub selectInstallClass1 {
-    my ($o, $verif, $l, $def, $l2, $def2) = @_;
-    $verif->($o->ask_from_list(_("Install Class"), _("Which installation class do you want?"), $l, $def) || die 'already displayed');
-
-    $::live ? 'Update' : $o->ask_from_list_(_("Install/Update"), _("Is this an install or an update?"), $l2, $def2);
-}
-
-#------------------------------------------------------------------------------
-sub selectInstallClass {
-    my ($o, $clicked) = @_;
-
-    my %c = my @c = (
-      if_(!$::corporate,
-	_("Recommended") => "beginner",
-      ),
-      if_($o->{meta_class} ne 'desktop',
-	_("Expert")	 => "expert",
-      ),
-    );
-    %c = @c = (_("Expert") => "expert") if $::expert && !$clicked;
-
-    $o->set_help('selectInstallClassCorpo') if $::corporate;
-
-    my $verifInstallClass = sub { $::expert = $c{$_[0]} eq "expert" };
-
-    $o->{isUpgrade} = $o->selectInstallClass1($verifInstallClass,
-					      first(list2kv(@c)), ${{reverse %c}}{$::expert ? "expert" : "beginner"},
-					      [ __("Install"), __("Update") ], $o->{isUpgrade} ? "Update" : "Install") eq "Update";
-    install_steps::selectInstallClass($o);
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse {
-    my ($o, $force) = @_;
-
-    $force ||= $o->{mouse}{unsafe} || $::expert;
-
-    my $prev = $o->{mouse}{type} . '|' . $o->{mouse}{name};
-    $o->{mouse} = mouse::fullname2mouse(
-	$o->ask_from_treelist_('', _("Please, choose the type of your mouse."), 
-			       '|', [ mouse::fullnames ], $prev) || return) if $force;
-
-    if ($force && $o->{mouse}{type} eq 'serial') {
-	$o->set_help('selectSerialPort');
-	$o->{mouse}{device} = 
-	  $o->ask_from_listf(_("Mouse Port"),
-			    _("Please choose on which serial port your mouse is connected to."),
-			    \&mouse::serial_port2text,
-			    [ mouse::serial_ports ]) or return;
-    }
-    if (arch() =~ /ppc/ && $o->{mouse}{nbuttons} == 1) {
-	#- set a sane default F11/F12
-	$o->{mouse}{button2_key} = 87;
-	$o->{mouse}{button3_key} = 88;
-	$o->ask_from('', _("Buttons emulation"),
-		[
-		{ label => _("Button 2 Emulation"), val => \$o->{mouse}{button2_key}, list => [ mouse::ppc_one_button_keys() ], format => \&mouse::ppc_one_button_key2text },
-		{ label => _("Button 3 Emulation"), val => \$o->{mouse}{button3_key}, list => [ mouse::ppc_one_button_keys() ], format => \&mouse::ppc_one_button_key2text },
-		]) or return;
-    }
-    
-    any::setup_thiskind($o, 'usb', !$::expert, 0, $o->{pcmcia}) if $o->{mouse}{device} eq "usbmouse";
-    eval { 
-	devices::make("usbmouse");
-	modules::load($_) foreach qw(hid mousedev usbmouse);
-    } if $o->{mouse}{device} eq "usbmouse";
-
-    $o->SUPER::selectMouse;
-    1;
-}
-#------------------------------------------------------------------------------
-sub setupSCSI {
-    my ($o, $clicked) = @_;
-
-    if (!$::noauto && arch() =~ /i.86/) {
-	if ($o->{pcmcia} ||= !$::testing && c::pcmcia_probe()) {
-	    my $w = $o->wait_message(_("PCMCIA"), _("Configuring PCMCIA cards..."));
-	    modules::configure_pcmcia($o->{pcmcia});
-	}
-    }
-    { 
-	my $w = $o->wait_message(_("IDE"), _("Configuring IDE"));
-	modules::load_ide();
-    }
-    any::setup_thiskind($o, 'scsi|disk', !$::expert && !$clicked, $clicked, $o->{pcmcia});
-
-    install_interactive::tellAboutProprietaryModules($o) if !$clicked;
-}
-
-sub ask_mntpoint_s {
-    my ($o, $fstab) = @_;
-    $o->set_help('ask_mntpoint_s');
-
-    my @fstab = grep { isTrueFS($_) } @$fstab;
-    @fstab = grep { isSwap($_) } @$fstab if @fstab == 0;
-    @fstab = @$fstab if @fstab == 0;
-    die _("no available partitions") if @fstab == 0;
-
-    {
-	my $w = $o->wait_message('', _("Scanning partitions to find mount points"));
-	install_any::suggest_mount_points($fstab, $o->{prefix}, 'uniq');
-	log::l("default mntpoint $_->{mntpoint} $_->{device}") foreach @fstab;
-    }
-    if (@fstab == 1) {
-	$fstab[0]{mntpoint} = '/';
-    } else {
-	$o->ask_from('', 
-				  _("Choose the mount points"),
-				  [ map { { label => partition_table::description($_), 
-					    val => \$_->{mntpoint},
-					    not_edit => 0,
-					    list => [ '', fsedit::suggestions_mntpoint(fsedit::empty_all_hds()) ] }
-					} grep { !$_->{real_mntpoint} || common::usingRamdisk() } @fstab ]) or return;
-    }
-    $o->SUPER::ask_mntpoint_s($fstab);
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisks {
-    my ($o) = @_;
-
-    my $warned;
-    install_any::getHds($o, sub {
-	my ($err) = @_;
-	$warned = 1;
-	if ($o->ask_yesorno(_("Error"), 
-_("I can't read your partition table, it's too corrupted for me :(
-I can try to go on blanking bad partitions (ALL DATA will be lost!).
-The other solution is to disallow DrakX to modify the partition table.
-(the error is %s)
-
-Do you agree to loose all the partitions?
-", $err))) {
-            0;
-        } else {
-            $o->{partitioning}{readonly} = 1;
-            1;
-        }
-    }) or $warned or $o->ask_warn('', 
-_("DiskDrake failed to read correctly the partition table.
-Continue at your own risk!"));
-
-    if (arch() =~ /ppc/ && detect_devices::get_mac_generation =~ /NewWorld/) { #- need to make bootstrap part if NewWorld machine - thx Pixel ;^)
-	if (defined $partition_table_mac::bootstrap_part) {
-	    #- don't do anything if we've got the bootstrap setup
-	    #- otherwise, go ahead and create one somewhere in the drive free space
-	} else {
-	    if (defined $partition_table_mac::freepart_start && $partition_table_mac::freepart_size >= 1) {	        
-		my ($hd) = $partition_table_mac::freepart_device;
-		log::l("creating bootstrap partition on drive /dev/$hd->{device}, block $partition_table_mac::freepart_start");
-		$partition_table_mac::bootstrap_part = $partition_table_mac::freepart_part;	
-		log::l("bootstrap now at $partition_table_mac::bootstrap_part");
-		fsedit::add($hd, { start => $partition_table_mac::freepart_start, size => 1 << 11, type => 0x401, mntpoint => '' }, $o->{all_hds}, { force => 1, primaryOrExtended => 'Primary' });
-		$new_bootstrap = 1;    
-	    } else {
-		$o->ask_warn('',_("No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake"));
-	    }
-	}
-    }
-
-    if ($o->{isUpgrade}) {
-	# either one root is defined (and all is ok), or we take the first one we find
-	my $p = fsedit::get_root_($o->{fstab});
-        if (!$p) {
-            my @l = install_any::find_root_parts($o->{fstab}, $o->{prefix}) or die _("No root partition found to perform an upgrade");
-	    $p = $o->ask_from_listf(_("Root Partition"),
-			            _("What is the root partition (/) of your system?"),
-			            \&partition_table::description, \@l) or die "setstep exitInstall\n";
-        }
-	install_any::use_root_part($o->{fstab}, $p, $o->{prefix});
-    } elsif ($::expert && $o->isa('interactive_gtk')) {
-        install_interactive::partition_with_diskdrake($o, $o->{all_hds});
-    } else {
-        install_interactive::partitionWizard($o);
-    }
-}
-
-#------------------------------------------------------------------------------
-sub rebootNeeded {
-    my ($o) = @_;
-    $o->ask_warn('', _("You need to reboot for the partition table modifications to take place"));
-
-    install_steps::rebootNeeded($o);
-}
-
-#------------------------------------------------------------------------------
-sub choosePartitionsToFormat {
-    my ($o, $fstab) = @_;
-
-    $o->SUPER::choosePartitionsToFormat($fstab);
-
-    my @l = grep { !$_->{isMounted} && $_->{mntpoint} && 
-		   (!isSwap($_) || $::expert) &&
-		   (!isFat($_) || $_->{notFormatted} || $::expert) &&
-		   (!isOtherAvailableFS($_) || $::expert || $_->{toFormat})
-	       } @$fstab;
-    $_->{toFormat} = 1 foreach grep { isSwap($_) && !$::expert } @$fstab;
-
-    return if @l == 0 || !$::expert && 0 == grep { ! $_->{toFormat} } @l;
-
-    #- keep it temporary until the guy has accepted
-    $_->{toFormatTmp} = $_->{toFormat} || $_->{toFormatUnsure} foreach @l;
-
-    $o->ask_from_(
-        { messages => _("Choose the partitions you want to format"),
-          advanced_messages => _("Check bad blocks?"),
-        },
-        [ map { 
-	    my $e = $_;
-	    ({
-	      text => partition_table::description($e), type => 'bool',
-	      val => \$e->{toFormatTmp}
-	     }, if_(!isLoopback($_) && !isThisFs("reiserfs", $_) && !isThisFs("xfs", $_) && !isThisFs("jfs", $_), {
-	      text => partition_table::description($e), type => 'bool', advanced => 1, 
-	      disabled => sub { !$e->{toFormatTmp} },
-	      val => \$e->{toFormatCheck}
-        })) } @l ]
-    ) or die 'already displayed';
-    #- ok now we can really set toFormat
-    foreach (@l) {
-	$_->{toFormat} = delete $_->{toFormatTmp};
-	$_->{isFormatted} = 0;
-    }
-}
-
-
-sub formatMountPartitions {
-    my ($o, $fstab) = @_;
-    my $w;
-    fs::formatMount_all($o->{all_hds}{raids}, $o->{fstab}, $o->{prefix}, sub {
-	my ($part) = @_;
-	$w ||= $o->wait_message('', _("Formatting partitions"));
-	$w->set(isLoopback($part) ?
-		_("Creating and formatting file %s", $part->{loopback_file}) :
-		_("Formatting partition %s", $part->{device}));
-    });
-    die _("Not enough swap to fulfill installation, please add some") if availableMemory < 40 * 1024;
-}
-
-#------------------------------------------------------------------------------
-sub setPackages {
-    my ($o) = @_;
-    my $w = $o->wait_message('', _("Looking for available packages"));
-    $o->SUPER::setPackages;
-}
-#------------------------------------------------------------------------------
-sub selectPackagesToUpgrade {
-    my ($o) = @_;
-    my $w = $o->wait_message('', _("Finding packages to upgrade"));
-    $o->SUPER::selectPackagesToUpgrade();
-}
-#------------------------------------------------------------------------------
-sub choosePackages {
-    my ($o, $packages, $compssUsers, $first_time) = @_;
-
-    #- this is done at the very beginning to take into account
-    #- selection of CD by user if using a cdrom.
-    $o->chooseCD($packages) if $o->{method} eq 'cdrom' && !$::oem;
-
-    my $availableC = install_steps::choosePackages(@_);
-    my $individual = $::expert;
-
-    require pkgs;
-
-    my $min_size = pkgs::selectedSize($packages);
-    $min_size < $availableC or die _("Your system has not enough space left for installation or upgrade (%d > %d)", $min_size, $availableC);
-
-    my $min_mark = $::expert ? 3 : 4;
-    my $def_mark = 4; #-TODO: was 59, 59 is for packages that need gl hw acceleration.
-
-    my $b = pkgs::saveSelected($packages);
-    pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $def_mark, 0);
-    my $def_size = pkgs::selectedSize($packages) + 1; #- avoid division by zero.
-    my $level = pkgs::setSelectedFromCompssList($packages, { map { $_ => 1 } map { @{$compssUsers->{$_}{flags}} } @{$o->{compssUsersSorted}} }, $min_mark, 0);
-    my $max_size = pkgs::selectedSize($packages) + 1; #- avoid division by zero.
-    pkgs::restoreSelected($b);
-
-    $o->chooseGroups($packages, $compssUsers, $min_mark, \$individual, $max_size) if !$::corporate;
-
-    my $size2install = min($availableC, do {
-	my $max = round_up(min($max_size, $availableC) / sqr(1024), 100);
-	
-	if (1) {
-		my (@l);
-		my @text = (__("Minimum (%dMB)"), __("Recommended (%dMB)"), __("Complete (%dMB)"));
-		if ($o->{meta_class} eq 'desktop') {
-		    @l = (300, 500, 800, 0);
-		    $max > $l[2] or splice(@l, 2, 1);
-		    $max > $l[1] or splice(@l, 1, 1);
-		    $max > $l[0] or @l = $max;
-		    $text[$#l] = __("Custom");
-		} else {
-		    @l = (300, 700, $max);
-		    $l[2] > $l[1] + 200 or splice(@l, 1, 1); #- not worth proposing too alike stuff
-		    $l[1] > $l[0] + 100 or splice(@l, 0, 1);
-		}
-		$o->set_help('empty');
-#		$o->ask_from_listf('', _("Select the size you want to install"),
-#				   sub { _ ($text[$_[0]], $_[0]) }, \@l, $l[1]) * sqr(1024);
-		$max * sqr(1024);
-	} else {
-	    $o->chooseSizeToInstall($packages, $min_size, $def_size, $max_size, $availableC, $individual) || goto &choosePackages;
-	}
-    });
-    if (!$size2install) { #- special case for desktop
-	$o->chooseGroups($packages, $compssUsers, $min_mark) or goto &choosePackages;
-	$size2install = $availableC;
-    }
-
-    ($o->{packages_}{ind}) =
-      pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $min_mark, $size2install);
-
-    $o->choosePackagesTree($packages) if $individual;
-
-    install_any::warnAboutNaughtyServers($o);
-}
-
-sub chooseSizeToInstall {
-    my ($o, $packages, $min, $def, $max, $availableC) = @_;
-    min($def, $availableC * 0.7);
-}
-sub choosePackagesTree {
-    my ($o, $packages) = @_;
-
-    $o->ask_many_from_list('', _("Choose the packages you want to install"),
-			   {
-			    list => [ 
-				      map { pkgs::packageByName($packages, $_) }
-				      keys %{$packages->{names}} ],
-			    value => \&pkgs::packageFlagSelected,
-			    label => \&pkgs::packageName,
-			    sort => 1,
-			   });
-}
-sub loadSavePackagesOnFloppy {
-    my ($o, $packages) = @_;
-    my $choice = $o->ask_from_listf('', 
-_("Please choose load or save package selection on floppy.
-The format is the same as auto_install generated floppies."),
-				    sub { translate($_[0]{text}) },
-				    [ { text => _("Load from floppy"), code => sub {
-					    while (1) {
-						my $w = $o->wait_message(_("Package selection"), _("Loading from floppy"));
-						log::l("load package selection from floppy");
-						my $O = eval { install_any::loadO({}, 'floppy') };
-						if ($@) {
-						    $w = undef; #- close wait message.
-						    $o->ask_okcancel('', _("Insert a floppy containing package selection"))
-						      or return;
-						} else {
-						    install_any::unselectMostPackages($o);
-						    foreach (@{$O->{default_packages} || []}) {
-							my $pkg = pkgs::packageByName($packages, $_);
-							pkgs::selectPackage($packages, $pkg) if $pkg;
-						    }
-						    return 1;
-						}
-					    }
-					} },
-				      { text => _("Save on floppy"), code => sub {
-					    log::l("save package selection to floppy");
-					    install_any::g_default_packages($o, 'quiet');
-					} },
-				    ]);
-    $choice->{code} and $choice->{code}();
-}
-sub chooseGroups {
-    my ($o, $packages, $compssUsers, $min_level, $individual, $max_size) = @_;
-
-    my $b = pkgs::saveSelected($packages);
-    install_any::unselectMostPackages($o);
-    pkgs::setSelectedFromCompssList($packages, {}, $min_level, $max_size);
-    my $system_size = pkgs::selectedSize($packages);
-    my ($sizes, $pkgs) = pkgs::computeGroupSize($packages, $min_level);
-    pkgs::restoreSelected($b);
-    log::l("system_size: $system_size");
-
-    my @groups = @{$o->{compssUsersSorted}};
-    my %stable_flags = grep_each { $::b } %{$o->{compssUsersChoice}};
-    delete $stable_flags{$_} foreach map { @{$compssUsers->{$_}{flags}} } @groups;
-
-    my $compute_size = sub {
-	my %pkgs;
-	my %flags = %stable_flags; @flags{@_} = ();
-	my $total_size;
-	A: while (my ($k, $size) = each %$sizes) {
-	    Or: foreach (split "\t", $k) {
-		  foreach (split "&&") {
-		      exists $flags{$_} or next Or;
-		  }
-		  $total_size += $size;
-		  $pkgs{$_} = 1 foreach @{$pkgs->{$k}};
-		  next A;
-	      }
-	  }
-	log::l("computed size $total_size");
-	log::l("chooseGroups: ", join(" ", sort keys %pkgs));
-
-	int $total_size;
-    };
-    my %val = map {
-	$_ => ! grep { ! $o->{compssUsersChoice}{$_} } @{$compssUsers->{$_}{flags}}
-    } @groups;
-
-#    @groups = grep { $size{$_} = round_down($size{$_} / sqr(1024), 10) } @groups; #- don't display the empty or small one (eg: because all packages are below $min_level)
-    my ($all, $size);
-    my $available_size = install_any::getAvailableSpace($o) / sqr(1024);
-    my $size_to_display = sub { 
-	my $lsize = $system_size + $compute_size->(map { @{$compssUsers->{$_}{flags}} } grep { $val{$_} } @groups);
-
-	#- if a profile is deselected, deselect everything (easier than deselecting the profile packages)
-	$size > $lsize and install_any::unselectMostPackages($o);
-	$size = $lsize;
-	_("Total size: %d / %d MB", pkgs::correctSize($size / sqr(1024)), $available_size);
-    };
-
-    while (1) {
-	$o->reallyChooseGroups($size_to_display, $individual, \%val) or return;
-	last if pkgs::correctSize($size / sqr(1024)) < $available_size;
-       
-	$o->ask_warn('', _("Selected size is larger than available space"));	
-    }
-
-    $o->{compssUsersChoice}{$_} = 0 foreach map { @{$compssUsers->{$_}{flags}} } grep { !$val{$_} } keys %val;
-    $o->{compssUsersChoice}{$_} = 1 foreach map { @{$compssUsers->{$_}{flags}} } grep {  $val{$_} } keys %val;
-    1;
-}
-
-sub reallyChooseGroups {
-    my ($o, $size_to_display, $individual, $val) = @_;
-
-    my $size_text = &$size_to_display;
-
-    my ($path, $all);
-    $o->ask_from('', _("Package Group Selection"), [
-        { val => \$size_text, type => 'label' }, {},
-	 (map {; 
-	       my $old = $path;
-	       $path = $o->{compssUsers}{$_}{path};
-	       if_($old ne $path, { val => translate($path) }),
-		 {
-		  val => \$val->{$_},
-		  type => 'bool',
-		  disabled => sub { $all },
-		  text => translate($o->{compssUsers}{$_}{label}),
-		  help => translate($o->{compssUsers}{$_}{descr}),
-		 }
-	   } @{$o->{compssUsersSorted}}),
-	 if_($o->{meta_class} eq 'desktop', { text => _("All"), val => \$all, type => 'bool' }),
-	 if_($individual, { text => _("Individual package selection"), val => $individual, advanced => 1, type => 'bool' }),
-    ], changed => sub { $size_text = &$size_to_display }) or return;
-
-    if ($all) {
-	$val->{$_} = 1 foreach keys %$val;
-    }
-    1;    
-}
-
-sub chooseCD {
-    my ($o, $packages) = @_;
-    my @mediums = grep { $_ != $install_any::boot_medium } pkgs::allMediums($packages);
-    my @mediumsDescr = ();
-    my %mediumsDescr = ();
-
-    if (!common::usingRamdisk()) {
-	#- mono-cd in case of no ramdisk
-	foreach (@mediums) {
-	    pkgs::mediumDescr($packages, $install_any::boot_medium) eq pkgs::mediumDescr($packages, $_) and next;
-	    undef $packages->{mediums}{$_}{selected};
-	}
-	log::l("low memory install, using single CD installation (as it is not ejectable)");
-	return;
-    }
-
-    #- the boot medium is already selected.
-    $mediumsDescr{pkgs::mediumDescr($packages, $install_any::boot_medium)} = 1;
-
-    #- build mediumDescr according to mediums, this avoid asking multiple times
-    #- all the medium grouped together on only one CD.
-    foreach (@mediums) {
-	my $descr = pkgs::mediumDescr($packages, $_);
-	exists $mediumsDescr{$descr} or push @mediumsDescr, $descr;
-	$mediumsDescr{$descr} ||= $packages->{mediums}{$_}{selected};
-    }
-
-    #- if no other medium available or a poor beginner, we are choosing for him!
-    #- note first CD is always selected and should not be unselected!
-    return if @mediumsDescr == () || !$::expert;
-
-    $o->set_help('chooseCD');
-    $o->ask_many_from_list('',
-_("If you have all the CDs in the list below, click Ok.
-If you have none of those CDs, click Cancel.
-If only some CDs are missing, unselect them, then click Ok."),
-			   {
-			    list => \@mediumsDescr,
-			    label => sub { _("Cd-Rom labeled \"%s\"", $_[0]) },
-			    val => sub { \$mediumsDescr{$_[0]} },
-			   }) or do {
-			       $mediumsDescr{$_} = 0 foreach @mediumsDescr; #- force unselection of other CDs.
-			   };
-    $o->set_help('choosePackages');
-
-    #- restore true selection of medium (which may have been grouped together)
-    foreach (@mediums) {
-	my $descr = pkgs::mediumDescr($packages, $_);
-	$packages->{mediums}{$_}{selected} = $mediumsDescr{$descr};
-	log::l("select status of medium $_ is $packages->{mediums}{$_}{selected}");
-    }
-}
-
-#------------------------------------------------------------------------------
-sub installPackages {
-    my ($o, $packages) = @_;
-    my ($current, $total) = 0;
-
-    my $w = $o->wait_message(_("Installing"), _("Preparing installation"));
-
-    my $old = \&pkgs::installCallback;
-    local *pkgs::installCallback = sub {
-	my $m = shift;
-	if ($m =~ /^Starting installation/) {
-	    $total = $_[1];
-	} elsif ($m =~ /^Starting installing package/) {
-	    my $name = $_[0];
-	    $w->set(_("Installing package %s\n%d%%", $name, $total && 100 * $current / $total));
-	    $current += pkgs::packageSize(pkgs::packageByName($o->{packages}, $name));
-	} else { unshift @_, $m; goto $old }
-    };
-
-    #- the modification is not local as the box should be living for other package installation.
-    #- BEWARE this is somewhat duplicated (but not exactly from gtk code).
-    undef *install_any::changeMedium;
-    *install_any::changeMedium = sub {
-	my ($method, $medium) = @_;
-
-	#- if not using a cdrom medium, always abort.
-	$method eq 'cdrom' && !$::oem and do {
-	    my $name = pkgs::mediumDescr($o->{packages}, $medium);
-	    local $| = 1; print "\a";
-	    my $r = $name !~ /Application/ || ($o->{useless_thing_accepted2} ||= $o->ask_from_list_('', formatAlaTeX($com_license), [ __("Accept"), __("Refuse") ], "Accept") eq "Accept");
-            $r &&= $o->ask_okcancel('', _("Change your Cd-Rom!
-
-Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.
-If you don't have it, press Cancel to avoid installation from this Cd-Rom.", $name), 1);
-            return $r;
-	};
-    };
-    my $install_result;
-    catch_cdie { $install_result = $o->install_steps::installPackages($packages); }
-      sub {
-	  if ($@ =~ /^error ordering package list: (.*)/) {
-	      $o->ask_yesorno('', [
-_("There was an error ordering packages:"), $1, _("Go on anyway?") ], 1) and return 1;
-	      ${$_[0]} = "already displayed";
-	  } elsif ($@ =~ /^error installing package list: (.*)/) {
-	      $o->ask_yesorno('', [
-_("There was an error installing packages:"), $1, _("Go on anyway?") ], 1) and return 1;
-	      ${$_[0]} = "already displayed";
-	  }
-	  0;
-      };
-    if ($pkgs::cancel_install) {
-	$pkgs::cancel_install = 0;
-	die "setstep choosePackages\n";
-    }
-    $install_result;
-}
-
-sub afterInstallPackages($) {
-    my ($o) = @_;
-    my $w = $o->wait_message('', _("Post-install configuration"));
-    $o->SUPER::afterInstallPackages($o);
-}
-
-sub copyKernelFromFloppy {
-    my ($o) = @_;
-    $o->ask_okcancel('', _("Please insert the Boot floppy used in drive %s", $o->{blank}), 1) or return;
-    $o->SUPER::copyKernelFromFloppy();
-}
-
-sub updateModulesFromFloppy {
-    my ($o) = @_;
-    $o->ask_okcancel('', _("Please insert the Update Modules floppy in drive %s", $o->{updatemodules}), 1) or return;
-    $o->SUPER::updateModulesFromFloppy();
-}
-
-#------------------------------------------------------------------------------
-sub configureNetwork {
-    my ($o, $first_time, $noauto) = @_;
-    require network::netconnect;
-    network::netconnect::main($o->{prefix}, $o->{netcnx} ||= {}, $o->{netc}, $o->{mouse}, $o, $o->{intf},
-			      $first_time, $o->{lang} eq "fr_FR" && $o->{keyboard} eq "fr", $noauto);
-}
-
-#-configureNetworkIntf moved to network
-
-#-configureNetworkNet moved to network
-#------------------------------------------------------------------------------
-#-pppConfig moved to any.pm
-#------------------------------------------------------------------------------
-sub installCrypto {
-    my ($o) = @_;
-    my $u = $o->{crypto} ||= {};
-    
-    $::expert and $o->hasNetwork or return;
-
-    is_empty_hash_ref($u) and $o->ask_yesorno('', 
-_("You have now the possibility to download software aimed for encryption.
-
-WARNING:
-
-Due to different general requirements applicable to these software and imposed
-by various jurisdictions, customer and/or end user of theses software should
-ensure that the laws of his/their jurisdiction allow him/them to download, stock
-and/or use these software.
-
-In addition customer and/or end user shall particularly be aware to not infringe
-the laws of his/their jurisdiction. Should customer and/or end user not
-respect the provision of these applicable laws, he/they will incure serious
-sanctions.
-
-In no event shall Mandrakesoft nor its manufacturers and/or suppliers be liable
-for special, indirect or incidental damages whatsoever (including, but not
-limited to loss of profits, business interruption, loss of commercial data and
-other pecuniary losses, and eventual liabilities and indemnification to be paid
-pursuant to a court decision) arising out of use, possession, or the sole
-downloading of these software, to which customer and/or end user could
-eventually have access after having sign up the present agreement.
-
-
-For any queries relating to these agreement, please contact 
-Mandrakesoft, Inc.
-2400 N. Lincoln Avenue Suite 243
-Altadena California 91001
-USA")) || return;
-
-    require crypto;
-    eval {
-      $u->{mirror} = $o->ask_from_listf('', 
-					_("Choose a mirror from which to get the packages"), 
-					\&crypto::mirror2text, 
-					[ crypto::mirrors() ], 
-					$u->{mirror});
-    };
-    return if $@;
-
-    #- bring all interface up for installing crypto packages.
-    install_interactive::upNetwork($o);
-
-    my @packages = do {
-      my $w = $o->wait_message('', _("Contacting the mirror to get the list of available packages"));
-      crypto::getPackages($o->{prefix}, $o->{packages}, $u->{mirror}); #- make sure $o->{packages} is defined when testing
-    };
-    $u->{packages} = $o->ask_many_from_list('', _("Please choose the packages you want to install."), { list => \@packages, values => $u->{packages} }) or return;
-    $o->pkg_install(@{$u->{packages}});
-
-    #- stop interface using ppp only.
-    install_interactive::downNetwork($o, 'pppOnly');
-}
-
-#------------------------------------------------------------------------------
-sub configureTimezone {
-    my ($o, $clicked) = @_;
-
-    require timezone;
-    $o->{timezone}{timezone} = $o->ask_from_treelist('', _("Which is your timezone?"), '/', [ timezone::getTimeZones($::g_auto_install ? '' : $o->{prefix}) ], $o->{timezone}{timezone});
-    $o->set_help('configureTimezoneGMT');
-
-    my $ntp = to_bool($o->{timezone}{ntp});
-    $o->ask_from('', '', [
-	  { text => _("Hardware clock set to GMT"), val => \$o->{timezone}{UTC}, type => 'bool' },
-	  { text => _("Automatic time synchronization (using NTP)"), val => \$ntp, type => 'bool' },
-    ]) or goto &configureTimezone
-	    if $::expert || $clicked;
-    if ($ntp) {
-	my @servers = split("\n", $timezone::ntp_servers);
-
-	$o->ask_from('', '',
-	    [ { label => _("NTP Server"), val => \$o->{timezone}{ntp}, list => \@servers, not_edit => 0 } ]
-        ) or goto &configureTimezone;
-	$o->{timezone}{ntp} =~ s/.*\((.+)\)/$1/;
-    } else {
-	$o->{timezone}{ntp} = '';
-    }
-    install_steps::configureTimezone($o);
-}
-
-#------------------------------------------------------------------------------
-sub configureServices { 
-    my ($o, $clicked) = @_;
-    require services;
-    $o->{services} = services::ask($o, $o->{prefix}) if $::expert || $clicked;
-    install_steps::configureServices($o);
-}
-
-sub summary {
-    my ($o, $first_time) = @_;
-    require pkgs;
-
-    if ($first_time) {
-	#- auto-detection
-	$o->configurePrinter(0) if !$::expert;
-	install_any::preConfigureTimezone($o);
-    }
-    my $mouse_name;
-    my $format_mouse = sub { $mouse_name = translate($o->{mouse}{type}) . ' ' . translate($o->{mouse}{name}) };
-    &$format_mouse;
-
-    #- format printer description in a better way
-    my $format_printers = sub {
-	my $printer = $o->{printer};
-	if (is_empty_hash_ref($printer->{configured})) {
-	    pkgs::packageFlagInstalled(pkgs::packageByName($o->{packages}, 'cups')) and return _("Remote CUPS server");
-	    return _("No printer");
-	}
-	my $entry;
-	foreach ($printer->{currentqueue},
-		 map { $_->{queuedata} } ($printer->{configured}{$printer->{DEFAULT}}, values %{$printer->{configured}})) {
-	    $_ && ($_->{make} || $_->{model}) and return "$_->{make} $_->{model}";
-	}
-	return _("Remote CUPS server"); #- fall back in case of something wrong.
-    };
-
-    $o->ask_from_({
-		   messages => _("Summary"),
-		   cancel   => '',
-		  }, [
-{ label => _("Mouse"), val => \$mouse_name, clicked => sub { $o->selectMouse(1); mouse::write($o->{prefix}, $o->{mouse}); &$format_mouse } },
-{ label => _("Keyboard"), val => \$o->{keyboard}, clicked => sub { $o->selectKeyboard(1) }, format => sub { translate(keyboard::keyboard2text($_[0])) } },
-{ label => _("Timezone"), val => \$o->{timezone}{timezone}, clicked => sub { $o->configureTimezone(1) } },
-{ label => _("Printer"), val => \$o->{printer}, clicked => sub { $o->configurePrinter(1) }, format => $format_printers },
-    (map {
-{ label => _("ISDN card"), val => $_->{description}, clicked => sub { $o->configureNetwork } }
-     } grep { $_->{driver} eq 'hisax' } detect_devices::probeall()),
-    (map { 
-{ label => _("Sound card"), val => $_->{description} } 
-     } arch() !~ /ppc/ ? modules::get_that_type('sound') : modules::load_thiskind('sound')),
-    (map {
-{ label => _("TV card"), val => $_->{description} } 
-     } grep { $_->{driver} eq 'bttv' } detect_devices::probeall()),
-]);
-    install_steps::configureTimezone($o);  #- do not forget it.
-}
-
-#------------------------------------------------------------------------------
-sub configurePrinter {
-    my ($o, $clicked) = @_;
-    $::corporate && !$clicked and return;
-
-    require printer;
-    require printerdrake;
-
-    #- try to determine if a question should be asked to the user or
-    #- if he is autorized to configure multiple queues.
-    my $ask_multiple_printer = ($::expert || $clicked) && 2 || scalar(printerdrake::auto_detect($o));
-    $ask_multiple_printer-- or return;
-
-    #- install packages needed for printer::getinfo()
-    $::testing or $o->do_pkgs->install('foomatic');
-
-    #- take default configuration, this include choosing the right system
-    #- currently used by the system.
-    my $printer = $o->{printer} ||= {};
-    eval { add2hash($printer, printer::getinfo($o->{prefix})) };
-
-    $printer->{PAPERSIZE} = $o->{lang} eq 'en' ? 'letter' : 'a4';
-    printerdrake::main($printer, $o, $ask_multiple_printer, sub { install_interactive::upNetwork($o, 'pppAvoided') });
-
-}
-
-#------------------------------------------------------------------------------
-sub setRootPassword {
-    my ($o, $clicked) = @_;
-    my $sup = $o->{superuser} ||= {};
-    my $auth = ($o->{authentication}{LDAP} && __("LDAP") ||
-		$o->{authentication}{NIS} && __("NIS") ||
-		__("Local files"));
-    $sup->{password2} ||= $sup->{password} ||= "";
-
-    return if $o->{security} < 1 && !$clicked;
-
-    $::isInstall and $o->set_help("setRootPassword", if_($::expert, "setRootPasswordAuth"));
-
-    $o->ask_from_(
-        {
-	 title => _("Set root password"), 
-	 messages => _("Set root password"),
-	 cancel => ($o->{security} <= 2 && !$::corporate ? _("No password") : ''),
-	 callbacks => { 
-	     complete => sub {
-		 $sup->{password} eq $sup->{password2} or $o->ask_warn('', [ _("The passwords do not match"), _("Please try again") ]), return (1,1);
-		 length $sup->{password} < 2 * $o->{security}
-		   and $o->ask_warn('', _("This password is too simple (must be at least %d characters long)", 2 * $o->{security})), return (1,0);
-		 return 0
-        } } }, [
-{ label => _("Password"), val => \$sup->{password},  hidden => 1 },
-{ label => _("Password (again)"), val => \$sup->{password2}, hidden => 1 },
-  if_($::expert,
-{ label => _("Authentication"), val => \$auth, list => [ __("Local files"), __("LDAP"), __("NIS") ], format => \&translate },
-  ),
-			 ]) or return;
-
-    if ($auth eq __("LDAP")) {
-	$o->{authentication}{LDAP} ||= "localhost"; #- any better solution ?
-	$o->{netc}{LDAPDOMAIN} ||= join (',', map { "dc=$_" } split /\./, $o->{netc}{DOMAINNAME});
-	$o->ask_from('',
-		     _("Authentication LDAP"),
-		     [ { label => _("LDAP Base dn"), val => \$o->{netc}{LDAPDOMAIN} },
-		       { label => _("LDAP Server"), val => \$o->{authentication}{LDAP} },
-		     ]);
-    } else { $o->{authentication}{LDAP} = '' }
-    if ($auth eq __("NIS")) { 
-	$o->{authentication}{NIS} ||= 'broadcast';
-	$o->ask_from('',
-		     _("Authentication NIS"),
-		     [ { label => _("NIS Domain"), val => \ ($o->{netc}{NISDOMAIN} ||= $o->{netc}{DOMAINNAME}) },
-		       { label => _("NIS Server"), val => \$o->{authentication}{NIS}, list => ["broadcast"], not_edit => 0 },
-		     ]); 
-    } else { $o->{authentication}{NIS} = '' }
-    install_steps::setRootPassword($o);
-}
-
-#------------------------------------------------------------------------------
-#-addUser
-#------------------------------------------------------------------------------
-sub addUser {
-    my ($o, $clicked) = @_;
-    $o->{users} ||= [];
-
-    if ($o->{security} < 1) {
-	push @{$o->{users}}, { password => 'mandrake', realname => 'default', icon => 'automagic' } 
-	  if !member('mandrake', map { $_->{name} } @{$o->{users}});
-    }
-    if (($o->{security} >= 1 || $clicked)) {
-	any::ask_users($o->{prefix}, $o, $o->{users}, $o->{security});
-    }
-    any::get_autologin($o->{prefix}, $o);
-    any::autologin($o->{prefix}, $o, $o);
-
-    install_steps::addUser($o);
-}
-
-#------------------------------------------------------------------------------
-sub createBootdisk {
-    my ($o, $first_time, $noauto) = @_;
-
-    return if !$noauto && $first_time && !$::expert;
-
-    if (arch() =~ /sparc/) {
-	#- as probing floppies is a bit more different on sparc, assume always /dev/fd0.
-	$o->ask_okcancel('',
-			 _("A custom bootdisk provides a way of booting into your Linux system without
-depending on the normal bootloader. This is useful if you don't want to install
-SILO on your system, or another operating system removes SILO, or SILO doesn't
-work with your hardware configuration. A custom bootdisk can also be used with
-the Mandrake rescue image, making it much easier to recover from severe system
-failures.
-
-If you want to create a bootdisk for your system, insert a floppy in the first
-drive and press \"Ok\"."),
-			 $o->{mkbootdisk}) or return $o->{mkbootdisk} = '';
-	my @l = detect_devices::floppies_dev();
-	$o->{mkbootdisk} = $l[0] if !$o->{mkbootdisk} || $o->{mkbootdisk} eq "1";
-	$o->{mkbootdisk} or return;
-    } else {
-	my @l = detect_devices::floppies_dev();
-	my %l = (
-		 'fd0'  => _("First floppy drive"),
-		 'fd1'  => _("Second floppy drive"),
-		 'Skip' => _("Skip"),
-		 );
-
-	if ($first_time || @l == 1) {
-	    $o->ask_yesorno('', formatAlaTeX(
-			    _("A custom bootdisk provides a way of booting into your Linux system without
-depending on the normal bootloader. This is useful if you don't want to install
-LILO (or grub) on your system, or another operating system removes LILO, or LILO doesn't
-work with your hardware configuration. A custom bootdisk can also be used with
-the Mandrake rescue image, making it much easier to recover from severe system
-failures. Would you like to create a bootdisk for your system?")), 
-			    $o->{mkbootdisk}) or return $o->{mkbootdisk} = '';
-	    $o->{mkbootdisk} = $l[0] if !$o->{mkbootdisk} || $o->{mkbootdisk} eq "1";
-	} else {
-	    @l or die _("Sorry, no floppy drive available");
-
-	    $o->ask_from_(
-              {
-	       messages => _("Choose the floppy drive you want to use to make the bootdisk"),
-	      }, [ { val => \$o->{mkbootdisk}, list => \@l, format => sub { $l{$_[0]} || $_[0] } } ]
-            ) or return;
-        }
-        $o->ask_warn('', _("Insert a floppy in drive %s", $l{$o->{mkbootdisk}} || $o->{mkbootdisk}));
-    }
-
-    my $w = $o->wait_message('', _("Creating bootdisk"));
-    install_steps::createBootdisk($o);
-}
-
-#------------------------------------------------------------------------------
-sub setupBootloaderBefore {
-    my ($o) = @_;
-    my $w = $o->wait_message('', _("Preparing bootloader"));
-    $o->set_help('empty');
-    $o->SUPER::setupBootloaderBefore($o);
-}
-
-#------------------------------------------------------------------------------
-sub setupBootloader {
-    my ($o, $more) = @_;
-    if (arch() =~ /ppc/) {
-	my $machtype = detect_devices::get_mac_generation();
-	if ($machtype !~ /NewWorld/) {
-	    $o->ask_warn('', _("You appear to have an OldWorld or Unknown\n machine, the yaboot bootloader will not work for you.\nThe install will continue, but you'll\n need to use BootX to boot your machine"));
-	    log::l("OldWorld or Unknown Machine - no yaboot setup");
-	    return;
-	}
-    }
-    if (arch() =~ /^alpha/) {
-	$o->ask_yesorno('', _("Do you want to use aboot?"), 1) or return;
-	catch_cdie { $o->SUPER::setupBootloader } sub {
-	    $o->ask_yesorno('', 
-_("Error installing aboot, 
-try to force installation even if that destroys the first partition?"));
-	};
-    } else {
-	any::setupBootloader($o, $o->{bootloader}, $o->{all_hds}, $o->{fstab}, $o->{security}, $o->{prefix}, $more) or return;
-
-	{
-	    my $w = $o->wait_message('', _("Installing bootloader"));
-	    eval { $o->SUPER::setupBootloader };
-	}
-	if (my $err = $@) {
-	    $err =~ /failed$/ or die;
-	    $o->ask_warn('', 
-			 [ _("Installation of bootloader failed. The following error occured:"),
-			   grep { !/^Warning:/ } cat_("$o->{prefix}/tmp/.error") ]);
-	    unlink "$o->{prefix}/tmp/.error";
-	    die "already displayed";
-	} elsif (arch() =~ /ppc/) {
-	    my $of_boot = cat_("$o->{prefix}/tmp/of_boot_dev") || die "Can't open $o->{prefix}/tmp/of_boot_dev";
-	    chop($of_boot);
-	    unlink "$o->{prefix}/tmp/.error";
-	    $o->ask_warn('', _("You may need to change your Open Firmware boot-device to\n enable the bootloader.  If you don't see the bootloader prompt at\n reboot, hold down Command-Option-O-F at reboot and enter:\n setenv boot-device %s,\\\\:tbxi\n Then type: shut-down\nAt your next boot you should see the bootloader prompt.", $of_boot));
-	}
-    }
-}
-
-sub miscellaneous {
-    my ($o, $clicked) = @_;
-    my %l = (
-	2 => _("Low"),
-	3 => _("Medium"),
-	4 => _("High"),
-    );
-    if ($::expert || $clicked) {
-	$ENV{SECURE_LEVEL} = $o->{security} = 
-	  $o->ask_from_listf('', _("Choose security level"), sub { $l{$_[0]} }, [ ikeys %l ], $o->{security})
-	    or return;
-    }
-    install_steps::miscellaneous($o);
-}
-
-#------------------------------------------------------------------------------
-sub configureX {
-    my ($o, $clicked) = @_;
-    $o->configureXBefore;
-
-    #- strange, xfs must not be started twice...
-    #- trying to stop and restart it does nothing good too...
-    my $xfs_started if 0;
-    run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/xfs", "start") unless $::live || $xfs_started;
-    $xfs_started = 1;
-
-    require Xconfigurator;
-    { local $::testing = 0; #- unset testing
-      local $::auto = !$::expert && !$clicked;
-
-      symlink "$o->{prefix}/etc/gtk", "/etc/gtk";
-      Xconfigurator::main($o->{prefix}, $o->{X}, $o, $o->do_pkgs,
-			  { allowFB          => $o->{allowFB},
-			    allowNVIDIA_rpms => install_any::allowNVIDIA_rpms($o->{packages}),
-			  });
-    }
-    $o->configureXAfter;
-}
-
-#------------------------------------------------------------------------------
-sub generateAutoInstFloppy {
-    my ($o, $replay) = @_;
-
-    my $floppy = detect_devices::floppy();
-
-    $o->ask_okcancel('', _("Insert a blank floppy in drive %s", $floppy), 1) or return;
-
-    my $dev = devices::make($floppy);
-    {
-	my $w = $o->wait_message('', _("Creating auto install floppy"));
-	install_any::getAndSaveAutoInstallFloppy($o, $replay, $dev) or return;
-    }
-    common::sync();         #- if you shall remove the floppy right after the LED switches off
-}
-
-#------------------------------------------------------------------------------
-sub exitInstall {
-    my ($o, $alldone) = @_;
-
-    return $o->{step} = '' unless $alldone || $o->ask_yesorno('', 
-_("Some steps are not completed.
-
-Do you really want to quit now?"), 0);
-
-    install_steps::exitInstall($o);
-
-    $o->exit unless $alldone;
-
-    $o->ask_from_no_check(
-	{
-	 messages =>
-_("Congratulations, installation is complete.
-Remove the boot media and press return to reboot.
-
-For information on fixes which are available for this release of Mandrake Linux,
-consult the Errata available from http://www.mandrakelinux.com/.
-
-Information on configuring your system is available in the post
-install chapter of the Official Mandrake Linux User's Guide."),
-	 cancel => '',
-	},      
-	[
-	 if_($::expert,
-	     { val => \ (my $t1 = _("Generate auto install floppy")), clicked => sub {
-		   my $t = $o->ask_from_list_('', 
-_("The auto install can be fully automated if wanted,
-in that case it will take over the hard drive!!
-(this is meant for installing on another box).
-
-You may prefer to replay the installation.
-"), [ __("Replay"), __("Automated") ]);
-		   $t and $o->generateAutoInstFloppy($t eq 'Replay');
-	       }, advanced => 1 },
-	     { val => \ (my $t2 = _("Save packages selection")), clicked => sub { install_any::g_default_packages($o) }, advanced => 1 },
-	 ),
-	]
-	) if $alldone && !$::g_auto_install;
-}
-
-
-#-######################################################################################
-#- Misc Steps Functions
-#-######################################################################################
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/install_steps_newt.pm b/perl-install/install_steps_newt.pm
deleted file mode 100644
index 2292094b0..000000000
--- a/perl-install/install_steps_newt.pm
+++ /dev/null
@@ -1,61 +0,0 @@
-package install_steps_newt; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(install_steps_interactive interactive_newt);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use install_steps_interactive;
-use interactive_newt;
-use install_any;
-use devices;
-use lang;
-use common;
-
-my $banner = __();
-
-sub banner {
-    my $banner = translate(__("Mandrake Linux Installation %s"));
-    my $l = first(Newt::GetScreenSize) - length($banner) - length($_[0]) + 1;
-    Newt::DrawRootText(0, 0, sprintf($banner, ' ' x $l . $_[0]));
-    Newt::Refresh;
-}
-
-sub new($$) {
-    my ($type, $o) = @_;
-
-    interactive_newt->new;
-
-    banner('');
-    Newt::PushHelpLine(_("  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "));
-
-    (bless {}, ref $type || $type)->SUPER::new($o);
-}
-
-sub enteringStep {
-    my ($o, $step) = @_;
-    $o->SUPER::enteringStep($step);
-    banner(translate($o->{steps}{$step}{text}));
-}
-
-sub exitInstall { 
-    &install_steps_interactive::exitInstall;
-    interactive_newt::end;
-}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-sub selectLanguage {
-    my ($o) = @_;
-    $o->SUPER::selectLanguage;
-    lang::load_console_font($o->{lang});
-}
-
-
-1;
-
diff --git a/perl-install/install_steps_stdio.pm b/perl-install/install_steps_stdio.pm
deleted file mode 100644
index 518640d29..000000000
--- a/perl-install/install_steps_stdio.pm
+++ /dev/null
@@ -1,40 +0,0 @@
-package install_steps_stdio; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(install_steps_interactive interactive_stdio);
-
-use common;
-use interactive_stdio;
-use install_steps_interactive;
-use lang;
-
-sub new($$) {
-    my ($type, $o) = @_;
-
-    (bless {}, ref $type || $type)->SUPER::new($o);
-}
-
-sub enteringStep {
-    my ($o, $step) = @_;
-    print _("Entering step `%s'\n", translate($o->{steps}{$step}{text}));
-    $o->SUPER::enteringStep($step);
-}
-sub leavingStep {
-    my ($o, $step) = @_;
-    $o->SUPER::leavingStep($step);
-    print "--------\n";
-}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-sub selectLanguage {
-    my ($o, $first_time) = @_;
-    $o->SUPER::selectLanguage($first_time);
-    lang::load_console_font($o->{lang});
-}
-
-1;
diff --git a/perl-install/interactive.pm b/perl-install/interactive.pm
deleted file mode 100644
index 931ad9e30..000000000
--- a/perl-install/interactive.pm
+++ /dev/null
@@ -1,361 +0,0 @@
-package interactive; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::Func;
-use common;
-
-#- ask_from_entries takes:
-#-  val      => reference to the value
-#-  label    => description
-#-  icon     => icon to put before the description
-#-  help     => tooltip
-#-  advanced => wether it is shown in by default or only in advanced mode
-#-  disabled => function returning wether it should be disabled (grayed)
-#-  gtk      => gtk preferences
-#-  type     => 
-#-     button => (with clicked or clicked_may_quit)
-#-               (type defaults to button if clicked or clicked_may_quit is there)
-#-               (val need not be a reference) (if clicked_may_quit return true, it's as if "Ok" was pressed)
-#-     label => (val need not be a reference) (type defaults to label if val is not a reference) 
-#-     bool (with text)
-#-     range (with min, max)
-#-     combo (with list, not_edit)
-#-     list (with list, icon2f (aka icon), separator (aka tree), format (aka pre_format function),
-#-           help can be a hash or a function)
-#-     entry (the default) (with hidden)
-#
-#- heritate from this class and you'll get all made interactivity for same steps.
-#- for this you need to provide
-#- - ask_from_listW(o, title, messages, arrayref, default) returns one string of arrayref
-#-
-#- where
-#- - o is the object
-#- - title is a string
-#- - messages is an refarray of strings
-#- - default is an optional string (default is in arrayref)
-#- - arrayref is an arrayref of strings
-#- - arrayref2 contains booleans telling the default state,
-#-
-#- ask_from_list and ask_from_list_ are wrappers around ask_from_biglist and ask_from_smalllist
-#-
-#- ask_from_list_ just translate arrayref before calling ask_from_list and untranslate the result
-#-
-#- ask_from_listW should handle differently small lists and big ones.
-#-
-
-
-#-######################################################################################
-#- OO Stuff
-#-######################################################################################
-sub new($) {
-    my ($type) = @_;
-
-    bless {}, ref $type || $type;
-}
-
-sub vnew {
-    my ($type, $su, $icon) = @_;
-    $su = $su eq "su";
-    if ($ENV{INTERACTIVE_HTTP}) {
-	require interactive_http;
-	return interactive_http->new;
-    }
-    require c;
-    if ($ENV{DISPLAY} && system('/usr/X11R6/bin/xtest') == 0) {
-	if ($su) {
-	    $ENV{PATH} = "/sbin:/usr/sbin:$ENV{PATH}";
-	    if ($>) {
-		exec("kdesu", "-c", "$0 @ARGV") or die _("kdesu missing");
-	    }
-	}
-	eval { require interactive_gtk };
-	if (!$@) {
-	    my $o = interactive_gtk->new;
-	    if ($icon && $icon ne 'default' && !$::isWizard) { $o->{icon} = $icon } else { undef $o->{icon} }
-	    return $o;
-	}
-    }
-
-    if ($su && $>) {
-	die "you must be root to run this program";
-    }
-    require 'log.pm';
-    undef *log::l;
-    *log::l = sub {}; # otherwise, it will bother us :(
-    require interactive_newt;
-    interactive_newt->new;
-}
-
-sub enter_console {}
-sub leave_console {}
-sub suspend {}
-sub resume {}
-sub end {}
-sub exit { exit($_[0]) }
-
-#-######################################################################################
-#- Interactive functions
-#-######################################################################################
-sub ask_warn {
-    my ($o, $title, $message) = @_;
-    local $::isWizard=0;
-    ask_from_listf_no_check($o, $title, $message, undef, [ _("Ok") ]);
-}
-
-sub ask_yesorno {
-    my ($o, $title, $message, $def, $help) = @_;
-    ask_from_list_($o, $title, $message, [ __("Yes"), __("No") ], $def ? "Yes" : "No", $help) eq "Yes";
-}
-
-sub ask_okcancel {
-    my ($o, $title, $message, $def, $help) = @_;
-
-    if ($::isWizard) {
-	$::no_separator = 1;
-    	$o->ask_from_no_check({ title => $title, messages => $message, focus_cancel => !$def });
-    } else {
-	ask_from_list_($o, $title, $message, [ __("Ok"), __("Cancel") ], $def ? "Ok" : "Cancel", $help) eq "Ok";
-    }
-}
-
-sub ask_file {
-    my ($o, $title, $dir) = @_;
-    $o->ask_fileW($title, $dir);
-}
-sub ask_fileW {
-    my ($o, $title, $dir) = @_;
-    $o->ask_from_entry($title, _("Choose a file"));
-}
-
-sub ask_from_list {
-    my ($o, $title, $message, $l, $def, $help) = @_;
-    ask_from_listf($o, $title, $message, undef, $l, $def, $help);
-}
-
-sub ask_from_list_ {
-    my ($o, $title, $message, $l, $def, $help) = @_;
-    ask_from_listf($o, $title, $message, sub { translate($_[0]) }, $l, $def, $help);
-}
-
-sub ask_from_listf_ {
-    my ($o, $title, $message, $f, $l, $def, $help) = @_;
-    ask_from_listf($o, $title, $message, sub { translate($f->(@_)) }, $l, $def, $help);
-}
-sub ask_from_listf {
-    my ($o, $title, $message, $f, $l, $def, $help) = @_;
-    @$l == 0 and die "ask_from_list: empty list\n" . common::backtrace();
-    @$l == 1 and return $l->[0];
-    goto &ask_from_listf_no_check;
-}
-
-sub ask_from_listf_no_check {
-    my ($o, $title, $message, $f, $l, $def, $help) = @_;
-
-    if (@$l <= 2 && !$::isWizard) {
-	my $ret = eval {
-	    ask_from_no_check($o, 
-	      { title => $title, messages => $message, ok => $l->[0] && may_apply($f, $l->[0]), 
-		if_($l->[1], cancel => may_apply($f, $l->[1]), focus_cancel => $def eq $l->[1]) }, []
-            ) ? $l->[0] : $l->[1];
-	};
-	die if $@ && $@ !~ /^wizcancel/;
-	$@ ? undef : $ret;
-    } else {
-	ask_from($o, $title, $message, [ { val => \$def, type => 'list', list => $l, help => $help, format => $f } ]) && $def;
-    }
-}
-
-sub ask_from_treelist {
-    my ($o, $title, $message, $separator, $l, $def) = @_;
-    ask_from_treelistf($o, $title, $message, $separator, undef, $l, $def);
-}
-sub ask_from_treelist_ {
-    my ($o, $title, $message, $separator, $l, $def) = @_;
-    my $transl = sub { join '|', map { translate($_) } split(quotemeta($separator), $_[0]) }; 
-    ask_from_treelistf($o, $title, $message, $separator, $transl, $l, $def);
-}
-sub ask_from_treelistf {
-    my ($o, $title, $message, $separator, $f, $l, $def) = @_;
-    ask_from($o, $title, $message, [ { val => \$def, separator => $separator, list => $l, format => $f, sort => 1 } ]) or return;
-    $def;
-}
-
-sub ask_many_from_list {
-    my ($o, $title, $message, @l) = @_;
-    @l = grep { @{$_->{list}} } @l or return '';
-    foreach my $h (@l) {
-	$h->{e}{$_} = {
-	    text => may_apply($h->{label}, $_),
-	    val => $h->{val} ? $h->{val}->($_) : do {
-		my $i =
-		  $h->{value} ? $h->{value}->($_) : 
-		    $h->{values} ? member($_, @{$h->{values}}) : 0;
-		\$i;
-	    },
-	    type => 'bool',
-	    help => may_apply($h->{help}, $_, ''),
-	    icon => may_apply($h->{icon2f}, $_, ''),
-	} foreach @{$h->{list}};
-	if ($h->{sort}) {
-	    $h->{list} = [ sort { $h->{e}{$a}{text} cmp $h->{e}{$b}{text} } @{$h->{list}} ];
-	}
-    }
-    $o->ask_from($title, $message, [ map { my $h = $_; map { $h->{e}{$_} } @{$h->{list}} } @l ]) or return;
-
-    @l = map {
-	my $h = $_;
-	[ grep { ${$h->{e}{$_}{val}} } @{$h->{list}} ];
-    } @l;
-    wantarray ? @l : $l[0];
-}
-
-sub ask_from_entry {
-    my ($o, $title, $message, %callback) = @_;
-    first(ask_from_entries($o, $title, $message, [''], %callback));
-}
-sub ask_from_entries {
-    my ($o, $title, $message, $l, %callback) = @_;
-
-    my @l = map { my $i = ''; { label => $_, val => \$i } } @$l;
-
-    $o->ask_from($title, $message, \@l, %callback) ?
-      map { ${$_->{val}} } @l :
-      undef;
-}
-
-#- can get a hash of callback: focus_out changed and complete
-#- moreove if you pass a hash with a field list -> combo
-#- if you pass a hash with a field hidden -> emulate stty -echo
-sub ask_from {
-    my ($o, $title, $message, $l, %callback) = @_;
-    ask_from_($o, { title => $title, messages => $message, callbacks => \%callback }, $l);
-}
-
-
-sub ask_from_normalize {
-    my ($o, $common, $l) = @_;
-
-    foreach my $e (@$l) {
-	if (my $l = $e->{list}) {
-	    if ($e->{sort} || @$l > 10 && !exists $e->{sort}) {
-		my @l2 = map { may_apply($e->{format}, $_) } @$l;
-		my @places = sort { $l2[$a] cmp $l2[$b] } 0 .. $#l2;
-		$e->{list} = $l = [ map { $l->[$_] } @places ];
-	    }
-	    $e->{type} = 'iconlist' if $e->{icon2f};
-	    $e->{type} = 'treelist' if $e->{separator};
-	    $e->{type} ||= 'list' if $e->{format};
-	    add2hash_($e, { not_edit => 1, type => 'combo' });
-	    ${$e->{val}} = $l->[0] if ($e->{type} ne 'combo' || $e->{not_edit}) && !member(${$e->{val}}, @$l);
-	} elsif ($e->{type} eq 'range') {
-	    $e->{min} <= $e->{max} or die "bad range min $e->{min} > max $e->{max} (called from " . join(':', caller()) . ")";
-	    ${$e->{val}} = max($e->{min}, min(${$e->{val}}, $e->{max}));
-	} elsif ($e->{type} eq 'button' || $e->{clicked} || $e->{clicked_may_quit}) {
-	    $e->{type} = 'button';
-	    $e->{clicked_may_quit} ||= $e->{clicked} ? sub { $e->{clicked}(); 0 } : sub {};	    
-	    $e->{val} = \ (my $v = $e->{val}) if !ref($e->{val});
-	} elsif ($e->{type} eq 'label' || !ref($e->{val})) {
-	    $e->{type} = 'label';
-	    $e->{val} = \ (my $v = $e->{val}) if !ref($e->{val});
-	} else {
-	    $e->{type} ||= 'entry';
-	}
-	$e->{disabled} ||= sub { 0 };
-    }
-
-    #- don't display empty lists and one element lists
-    @$l = grep { 
-	if ($_->{list} && $_->{not_edit}) {
-	    if (@{$_->{list}} == ()) {
-		eval {
-		    require log;
-		    log::l("ask_from_normalize: empty list for $_->{label}\n" . common::backtrace());
-		};
-	    }
-	    @{$_->{list}} > 1;
-	} else {
-	    1;
-	}
-    } @$l;
-
-    $common->{advanced_label} ||= _("Advanced");
-    $common->{$_} = [ deref($common->{$_}) ] foreach qw(messages advanced_messages);
-    add2hash_($common, { ok => _("Ok"), cancel => _("Cancel") }) if !exists $common->{ok} && !$::isWizard;
-    add2hash_($common->{callbacks} ||= {}, { changed => sub {}, focus_out => sub {}, complete => sub { 0 }, canceled => sub { 0 } });
-}
-
-sub ask_from_ {
-    my ($o, $common, $l) = @_;
-    ask_from_normalize($o, $common, $l);
-
-    @$l or return 1;
-    my $v = $o->ask_fromW($common, [ grep { !$_->{advanced} } @$l ], [ grep { $_->{advanced} } @$l ]);
-    %$common = ();
-    $v;
-}
-sub ask_from_no_check {
-    my ($o, $common, $l) = @_;
-    ask_from_normalize($o, $common, $l);
-    $o->ask_fromW($common, [ grep { !$_->{advanced} } @$l ], [ grep { $_->{advanced} } @$l ]);
-}
-
-
-sub ask_browse_tree_info {
-    my ($o, $title, $message, $common) = @_;
-    add2hash_($common, { ok => _("Ok"), cancel => _("Cancel") });
-    add2hash_($common, { title => $title, message => $message });
-    add2hash_($common, { grep_allowed_to_toggle      => sub { @_ },
-			 grep_unselected             => sub { grep { $common->{node_state}($_) eq 'unselected' } @_ },
-			 check_interactive_to_toggle => sub { 1 },
-			 toggle_nodes                => sub {
-			     my ($set_state, @nodes) = @_;
-			     my $new_state = !$common->{grep_unselected}($nodes[0]) ? 'selected' : 'unselected';
-			     $set_state->($_, $new_state) foreach @nodes;
-			 },
-		       });
-    $o->ask_browse_tree_info_refW($common);
-}
-sub ask_browse_tree_info_refW { #- default definition, do not use with too many items (memory consuming)
-    my ($o, $common) = @_;
-    my ($l, $v, $h) = ([], [], {});
-    $common->{build_tree}(sub {
-			      my ($node) = $common->{grep_allowed_to_toggle}(@_);
-			      if (my $state = $node && $common->{node_state}($node)) {
-				  push @$l, $node;
-				  $state eq 'selected' and push @$v, $node;
-				  $h->{$node} = $state eq 'selected';
-			      }
-			  }, 'flat');
-    add2hash_($common, { list   => $l, #- TODO interactivity of toggle is missing
-			 values => $v,
-			 help   => sub { $common->{get_info}($_[0]) },
-		       });
-    my ($new_v) = $o->ask_many_from_list($common->{title}, $common->{message}, $common) or return;
-    $common->{toggle_nodes}(sub {}, grep { ! delete $h->{$_} } @$new_v);
-    $common->{toggle_nodes}(sub {}, grep { $h->{$_} } keys %$h);
-    1;
-}
-
-sub wait_message {
-    my ($o, $title, $message, $temp) = @_;
-
-    my $w = $o->wait_messageW($title, [ _("Please wait"), deref($message) ]);
-    push @tempory::objects, $w if $temp;
-    my $b = before_leaving { $o->wait_message_endW($w) };
-
-    #- enable access through set
-    MDK::Common::Func::add_f4before_leaving(sub { $o->wait_message_nextW([ deref($_[1]) ], $w) }, $b, 'set');
-    $b;
-}
-
-sub kill {}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/interactive_gtk.pm b/perl-install/interactive_gtk.pm
deleted file mode 100644
index fe22a66b5..000000000
--- a/perl-install/interactive_gtk.pm
+++ /dev/null
@@ -1,794 +0,0 @@
-package interactive_gtk; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(interactive);
-
-use interactive;
-use common;
-use my_gtk qw(:helpers :wrappers);
-
-my $forgetTime = 1000; #- in milli-seconds
-
-sub new {
-    ($::windowheight, $::windowwidth) = my_gtk::gtkroot()->get_size if !$::isInstall;
-    goto &interactive::new;
-}
-sub enter_console { my ($o) = @_; $o->{suspended} = common::setVirtual(1) }
-sub leave_console { my ($o) = @_; common::setVirtual(delete $o->{suspended}) }
-
-sub exit { 
-    gtkset_mousecursor_normal(); #- for restoring a normal in any case on standalone
-    my_gtk::flush();
-    c::_exit($_[1]) #- workaround 
-}
-
-sub ask_warn {
-    local $my_gtk::pop_it = 1;
-    &interactive::ask_warn;
-}
-
-sub ask_fileW {
-    my ($o, $title, $dir) = @_;
-    my $w = my_gtk->new($title);
-    $dir .= '/' if $dir !~ m|/$|;
-    my_gtk::_ask_file($w, $title, $dir); 
-    $w->main;
-}
-
-sub create_boxradio {
-    my ($e, $may_go_to_next, $changed, $double_click) = @_;
-    my @l = map { may_apply($e->{format}, $_) } @{$e->{list}};
-
-    my $boxradio = gtkpack2__(new Gtk::VBox(0, 0),
-			      my @radios = gtkradio('', @l));
-    $boxradio->show;
-    my $tips = new Gtk::Tooltips;
-    mapn {
-	my ($txt, $w) = @_;
-	$w->signal_connect(button_press_event => $double_click) if $double_click;
-
-	$w->signal_connect(key_press_event => sub {
-            my ($w, $event) = @_;
-	    $may_go_to_next->($w, $event, 'tab');
-	    1;
-	});
-	$w->signal_connect(clicked => sub {
- 	    ${$e->{val}} = $txt;
-	    &$changed;
-        });
-	if ($e->{help}) {
-	    gtkset_tip($tips, $w,
-		       ref($e->{help}) eq 'HASH' ? $e->{help}{$txt} :
-		       ref($e->{help}) eq 'CODE' ? $e->{help}($txt) : $e->{help});
-	}
-    } $e->{list}, \@radios;
-
-    $boxradio, sub {
-	my ($v) = @_;
-	mapn { $_[0]->set_active($_[1] eq $v) } \@radios, $e->{list};
-    }, $radios[0];
-}
-
-sub create_clist {
-    my ($e, $may_go_to_next, $changed, $double_click) = @_;
-    my $curr;
-    my @l = map { may_apply($e->{format}, $_) } @{$e->{list}};
-
-    my $list = new Gtk::CList(1);
-    $list->set_selection_mode('browse');
-    $list->set_column_auto_resize(0, 1);
-
-    my $select = sub {
-	$list->set_focus_row($_[0]);
-	$list->select_row($_[0], 0);
-	$list->moveto($_[0], 0, 0.5, 0) if $list->row_is_visible($_[0]) ne 'full';
-    };
-
-#    ref $title && !@okcancel ?
-#      $list->signal_connect(button_release_event => $leave) :
-#      $list->signal_connect(button_press_event => sub { &$leave if $_[1]{type} =~ /^2/ });
-
-    my ($first_time, $starting_word, $start_reg) = (1, '', "^");
-    my $timeout;
-    $list->signal_connect(key_press_event => sub {
-        my ($w, $event) = @_;
-	my $c = chr($event->{keyval} & 0xff);
-
-	Gtk->timeout_remove($timeout) if $timeout; $timeout = '';
-	
-	if ($event->{keyval} >= 0x100) {
-	    &$may_go_to_next if $c eq "\r" || $c eq "\x8d";
-	    $starting_word = '' if $event->{keyval} != 0xffe4; # control
-	} else {
-	    if ($event->{state} & 4) {
-		#- control pressed
-		$c eq "s" or return 1;
-		$start_reg and $start_reg = '', return 1;
-		$curr++;
-	    } else {
-		&$may_go_to_next if $c eq ' ';
-
-		$curr++ if $starting_word eq '' || $starting_word eq $c;
-		$starting_word .= $c unless $starting_word eq $c;
-	    }
-	    my $word = quotemeta $starting_word;
-	    my $j; for ($j = 0; $j < @l; $j++) {
-		 $l[($j + $curr) % @l] =~ /$start_reg$word/i and last;
-	    }
-	    $j == @l ?
-	      $starting_word = '' :
-	      $select->(($j + $curr) % @l);
-
-	    $timeout = Gtk->timeout_add($forgetTime, sub { $timeout = $starting_word = ''; 0 } );
-	}
-	1;
-    });
-    $list->show;
-
-    $list->append($_) foreach @l;
-
-    $list->signal_connect(select_row => sub {
-	my ($w, $row) = @_;
-	${$e->{val}} = $e->{list}[$curr = $row];
-	&$changed;
-    });
-    $list->signal_connect(button_press_event => $double_click) if $double_click;
-
-    $list, sub {
-	my ($v) = @_;
-	eval {
-	    my $nb = find_index { $_ eq $v } @{$e->{list}};
-	    $select->($nb) if $nb != $list->focus_row;
-	};
-    };
-}
-
-sub create_ctree {
-    my ($e, $may_go_to_next, $changed, $double_click) = @_;
-    my @l = map { may_apply($e->{format}, $_) } @{$e->{list}};
-
-    my $sep = quotemeta $e->{separator};
-    my $tree = Gtk::CTree->new(1, 0);
-
-    my (%wtree, %wleaves, $size, $selected_via_click);
-    my $parent; $parent = sub {
-	if (my $w = $wtree{"$_[0]$e->{separator}"}) { return $w }
-	my $s;
-	foreach (split $sep, $_[0]) {
-	    $wtree{"$s$_$e->{separator}"} ||= 
-	      $tree->insert_node($s ? $parent->($s) : undef, undef, [$_], 5, (undef) x 4, 0, 0);
-	    $size++ if !$s;
-	    $s .= "$_$e->{separator}";
-	}
-	$wtree{$s};
-    };
-    foreach (@l) {
-	my ($root, $leaf) = /(.*)$sep(.+)/ ? ($1, $2) : ('', $_);
-	$wleaves{$_} = $tree->insert_node($parent->($root), undef, [$leaf], 5, (undef) x 4, 1, 0);
-    }
-    undef %wtree;
-
-    my $select = sub {
-	my ($node) = @_;
-	for (my $c = $node; $c; $c = $c->row->parent) { 
-	    $tree->expand($c);
-	}
-	for (my $i = 0; $tree->node_nth($i); $i++) {
-	    if ($tree->node_nth($i) == $node) {
-		$tree->set_focus_row($i);
-		last;
-	    }
-	}
-	$tree->select($node);
-	$tree->node_moveto($node, 0, 0.5, 0) if $tree->node_is_visible($node) ne 'full';
-    };
-
-    my $curr = $tree->node_nth(0); #- default value
-    $tree->set_column_auto_resize(0, 1);
-    $tree->set_selection_mode('browse');
-    $tree->signal_connect(tree_select_row => sub { 
-	$curr = $_[1]; 
-	if ($curr->row->is_leaf) {
-	    my @ll; for (my $c = $curr; $c; $c = $c->row->parent) { 
-		unshift @ll, first $tree->node_get_pixtext($c, 0);
-	    }
-	    my $val = join $e->{separator}, @ll;
-	    mapn {
-		${$e->{val}} = $_[1] if $val eq $_[0]
-	    } \@l, $e->{list};
-	    &$changed;
-	} else {
-	    $tree->expand($curr) if $selected_via_click;
-	}
-    });
-    my ($first_time, $starting_word, $start_reg) = (1, '', "^");
-    my $timeout;
-
-    my $toggle = sub { 
-	$curr->row->is_leaf ? 
-	  &$may_go_to_next :
-	  $tree->toggle_expansion($curr);
-    };
-    $tree->signal_connect(key_press_event => sub {
-        my ($w, $event) = @_;
-	$selected_via_click = 0;
-	my $c = chr($event->{keyval} & 0xff);
-	$curr or return;
-	Gtk->timeout_remove($timeout) if $timeout; $timeout = '';
-
-	if ($event->{keyval} >= 0x100) {
-	    &$toggle if $c eq "\r" || $c eq "\x8d";
-	    $starting_word = '' if $event->{keyval} != 0xffe4; # control
-	} else {
-	    my $next;
-	    if ($event->{state} & 4) {
-		#- control pressed
-		$c eq "s" or return 1;
-		$start_reg and $start_reg = '', return 1;
-		$next = 1;
-	    } else {
-		&$toggle if $c eq ' ';
-
-		$next = 1 if $starting_word eq '' || $starting_word eq $c;
-		$starting_word .= $c unless $starting_word eq $c;
-	    }
-	    my $word = quotemeta $starting_word;
-	    my ($after, $best);
-
-	    $tree->pre_recursive(undef, sub { 
-		my ($tree, $node) = @_;
-		$next &&= !$after;
-		$after ||= $node == $curr;
-		my ($t) = $tree->node_get_pixtext($node, 0);
-
-		if ($t =~ /$start_reg$word/i) {
-		    if ($after && !$next) {
-			($best, $after) = ($node, 0);
-		    } else {
-			$best ||= $node;
-		    }
-		}
-	    });
-	    if (defined $best) {
-		$select->($best);
-	    } else {
-		$starting_word = '';
-	    }
-	    $timeout = Gtk->timeout_add($forgetTime, sub { $timeout = $starting_word = ''; 0 });
-	}
-	1;
-    });
-    $tree->signal_connect(button_press_event => sub {
-	$selected_via_click = 1;
-	&$double_click if $curr->row->is_leaf && $double_click;
-    });
-
-    $tree->set_row_height($tree->style->font->ascent + $tree->style->font->descent + 1);
-
-    $tree, sub {
-	my $v = may_apply($e->{format}, $_[0]);
-	$select->($wleaves{$v} || return) if $wleaves{$v} != $tree->selection;
-    }, $size;
-}
-
-sub create_list {
-    my ($e, $may_go_to_next, $changed, $double_click) = @_;
-    my $l = $e->{list};
-    my $list = new Gtk::List();
-    $list->set_selection_mode('browse');
-
-    my $select = sub {
-	$list->select_item($_[0]);
-    };
-
-    my $tips = new Gtk::Tooltips;
-    my $toselect;
-    map_index {
-	my $item = new Gtk::ListItem(may_apply($e->{format}, $_));
-	$item->signal_connect(key_press_event => sub {
-    	    my ($w, $event) = @_;
-    	    my $c = chr($event->{keyval} & 0xff);
-	    $may_go_to_next->($event) if $event->{keyval} < 0x100 ? $c eq ' ' : $c eq "\r" || $c eq "\x8d";
-    	    1;
-    	});
-	$list->append_items($item);
-	$item->show;
-	if ($e->{help}) {
-	    gtkset_tip($tips, $item,
-		       ref($e->{help}) eq 'HASH' ? $e->{help}{$_} :
-		       ref($e->{help}) eq 'CODE' ? $e->{help}($_) : $e->{help});
-	}
-	$item->grab_focus if ${$e->{val}} && $_ eq ${$e->{val}};
-    } @$l;
-
-    #- signal_connect'ed after append_items otherwise it is called and destroys the default value
-    $list->signal_connect(select_child => sub {
-	my ($w, $row) = @_;
-	${$e->{val}} = $l->[$list->child_position($row)];
-	&$changed;
-    });
-    $list->signal_connect(button_press_event => $double_click) if $double_click;
-
-    $list, sub { 
-	my ($v) = @_;
-	eval { 
-	    $select->(find_index { $_ eq $v } @$l);
-	};
-    };
-}
-
-sub ask_fromW {
-    my ($o, $common, $l, $l2) = @_;
-    my $ignore = 0; #-to handle recursivity
-
-    my $mainw = my_gtk->new($common->{title}, %$o);
-    $mainw->sync; # for XPM's creation
-
-    #-the widgets
-    my (@widgets, @widgets_always, @widgets_advanced, $advanced, $advanced_pack, $has_horiz_scroll, $has_scroll, $total_size, $max_width);
-    my $tooltips = new Gtk::Tooltips;
-
-    my $set_all = sub {
-	$ignore = 1;
-	$_->{set}->(${$_->{e}{val}}) foreach @widgets_always, @widgets_advanced;
-	$_->{real_w}->set_sensitive(!$_->{e}{disabled}()) foreach @widgets_always, @widgets_advanced;
-	$ignore = 0;
-    };
-    my $get_all = sub {
-	${$_->{e}{val}} = $_->{get}->() foreach @widgets_always, @widgets_advanced;
-    };
-    my $update = sub {
-	my ($f) = @_;
-	return if $ignore;
-	$get_all->();
-	$f->();
-	$set_all->();
-	};
-    my $create_widget = sub {
-	my ($e, $ind) = @_;
-
-	my $may_go_to_next = sub {
-	    my ($w, $event, $kind) = @_;
-	    if ($kind eq 'tab') {
-		if (($event->{keyval} & 0x7f) == 0x9) {
-		    $w->signal_emit_stop("key_press_event");
-		    if ($ind == $#widgets) {
-			$mainw->{ok}->grab_focus;
-		    } else {
-			$widgets[$ind+1]{focus_w}->grab_focus;
-		    }
-		}
-	    } else {
-		if (!$event || ($event->{keyval} & 0x7f) == 0xd) {
-		    $w->signal_emit_stop("key_press_event") if $event;
-		    if ($ind == $#widgets) {
-			@widgets == 1 ? $mainw->{ok}->clicked : $mainw->{ok}->grab_focus;
-		    } else {
-			$widgets[$ind+1]{focus_w}->grab_focus;
-		    }
-		}
-	    }
-	};
-	my $changed = sub { $update->(sub { $common->{callbacks}{changed}($ind) }) };
-
-	my ($w, $real_w, $focus_w, $set, $get, $expand, $size, $width);
-	if ($e->{type} eq 'iconlist') {
-	    $w = new Gtk::Button;
-	    $set = sub {
-		gtkdestroy($e->{icon});
-		my $f = $e->{icon2f}->($_[0]);
-		$e->{icon} = -e $f ?
-		    gtkpng($f) :
-		    new Gtk::Label(may_apply($e->{format}, $_[0]));
-		$w->add($e->{icon});
-		$e->{icon}->show;
-	    };
-	    $w->signal_connect(clicked => sub {
-		$set->(${$e->{val}} = next_val_in_array(${$e->{val}}, $e->{list}));
-		$changed->();
-	    });
-	    $real_w = gtkpack_(new Gtk::HBox(0,10), 1, new Gtk::HBox(0,0), 0, $w, 1, new Gtk::HBox(0,0), );
-	} elsif ($e->{type} eq 'bool') {
-	    $w = Gtk::CheckButton->new($e->{text});
-	    $w->signal_connect(clicked => $changed);
-	    $set = sub { $w->set_active($_[0]) };
-	    $get = sub { $w->get_active };
-	    $width = length $e->{text};
-	} elsif ($e->{type} eq 'label') {
-	    $w = Gtk::Label->new(${$e->{val}});
-	    $set = sub { $w->set($_[0]) };
-	    $width = length ${$e->{val}};
-	} elsif ($e->{type} eq 'button') {
-	    $w = Gtk::Button->new('');
-	    $w->signal_connect(clicked => sub {
-		$get_all->();
-		$mainw->{rwindow}->hide;
-		if (my $v = $e->{clicked_may_quit}()) {
-		    $mainw->{retval} = $v;
-		    Gtk->main_quit;
-		}
-		$mainw->{rwindow}->show;
-		$set_all->();
-	    });
-	    $set = sub { $w->child->set(may_apply($e->{format}, $_[0])) };
-	    $width = length may_apply($e->{format}, ${$e->{val}});
-	} elsif ($e->{type} eq 'range') {
-	    my $adj = create_adjustment(${$e->{val}}, $e->{min}, $e->{max});
-	    $adj->signal_connect(value_changed => $changed);
-	    $w = new Gtk::HScale($adj);
-	    $w->set_digits(0);
-	    $w->signal_connect(key_press_event => $may_go_to_next);
-	    $set = sub { $adj->set_value($_[0]) };
-	    $get = sub { $adj->get_value };
-	    $size = 2;
-	} elsif ($e->{type} =~ /list/) {
-
-	    my $quit_if_double_click = 
-	      #- i'm the only one, double click means accepting
-	      @$l == 1 ? 
-		sub { if ($_[1]{type} =~ /^2/) { $mainw->{retval} = 1; Gtk->main_quit } } : ''; 
-
-	    my @para = ($e, $may_go_to_next, $changed, $quit_if_double_click);
-	    my $use_boxradio = exists $e->{gtk}{use_boxradio} ? $e->{gtk}{use_boxradio} : @{$e->{list}} <= 8;
-
-	    if ($e->{help}) {
-		#- used only when needed, as key bindings are dropped by List (CList does not seems to accepts Tooltips).
-		($w, $set, $focus_w) = $use_boxradio ? create_boxradio(@para) : create_list(@para);
-	    } elsif ($e->{type} eq 'treelist') {
-		($w, $set, $size) = create_ctree(@para);
-	    } else {
-		($w, $set, $focus_w) = $use_boxradio ? create_boxradio(@para) : create_clist(@para);
-	    }
-	    if (@{$e->{list}} > (@$l == 1 ? 10 : 4)) {
-		$has_scroll = 1;
-		$expand = 1;
-		$real_w = createScrolledWindow($w);
-		$size ||= @{$e->{list}};
-	    }
-	    $width = max(map { length } @{$e->{list}});
-	} else {
-	    if ($e->{type} eq "combo") {
-		$w = new Gtk::Combo;
-		$w->set_use_arrows_always(1);
-		$w->entry->set_editable(!$e->{not_edit});
-		$w->set_popdown_strings(@{$e->{list}});
-		$w->disable_activate;
-		($real_w, $w) = ($w, $w->entry);
-		my @l = sort { $b <=> $a } map { length } @{$e->{list}};
-		$has_horiz_scroll = 1;
-		$width = $l[@l / 16]; # take the third octile (think quartile)
-	    } else {
-                $w = new Gtk::Entry;
-		$w->signal_connect(focus_in_event => sub { $w->select_region });
-		$w->signal_connect(focus_out_event => sub { $w->select_region(0,0) });
-	    }
-	    $w->signal_connect(key_press_event => $may_go_to_next);
-	    $w->signal_connect(changed => $changed);
-	    $w->set_visibility(0) if $e->{hidden};
-	    $set = sub { $w->set_text($_[0]) if $_[0] ne $w->get_text };
-	    $get = sub { $w->get_text };
-	}
-	$w->signal_connect(focus_out_event => sub { 
-            $update->(sub { $common->{callbacks}{focus_out}($ind) });
-	});
-	$tooltips->set_tip($w, $e->{help}) if $e->{help} && !ref($e->{help});
-
-	$max_width = max($max_width, $width);
-	$total_size += $size || 1;
-    
-	{ e => $e, w => $w, real_w => $real_w || $w, focus_w => $focus_w || $w, expand => $expand,
-	  get => $get || sub { ${$e->{val}} }, set => $set || sub {},
-	  icon_w => -e $e->{icon} ? gtkpng($e->{icon}) : '' };
-    };
-    @widgets_always   = map_index { $create_widget->($_, $::i      ) } @$l;
-    my $always_total_size = $total_size;
-    @widgets_advanced = map_index { $create_widget->($_, $::i + @$l) } @$l2;
-
-    my $set_advanced = sub {
-	($advanced) = @_;
-	$advanced ? $advanced_pack->show : $advanced_pack->hide;
-	@widgets = (@widgets_always, $advanced ? @widgets_advanced : ());
-	$mainw->sync; #- for $set_all below (mainly for the set of clist)
-	$set_all->(); #- must be done when showing advanced lists (to center selected value)
-    };
-    my $advanced_button = [ $common->{advanced_label}, sub { $set_advanced->(!$advanced) } ];
-
-    my $create_widgets = sub {
-	my $w = create_packtable({}, map { [($_->{icon_w}, $_->{e}{label}, $_->{real_w})]} @_);
-
-	my ($wantedheight, $wantedwidth) = $::isEmbedded && !$my_gtk::pop_it ? (450, 380) : ($::windowheight * 0.8, $::windowwidth * 0.8);
-
-	my $width = max(250, $max_width * 5);
-	$mainw->{box_width} = min($wantedwidth, $width);
-
-	my $height = max(200, my_gtk::n_line_size($always_total_size, 'various', $mainw->{rwindow}));
-	$mainw->{box_height} = min($wantedheight, $height);
-
-	my $has = $width > $mainw->{box_width} || $height > $mainw->{box_height};
-	$has_scroll ||= $has;
-	$has ? createScrolledWindow($w) : $w;
-    };
-
-    my $pack = gtkpack_(create_box_with_title($mainw, @{$common->{messages}}),
-		   1, $create_widgets->(@widgets_always),
-		   if_($common->{ok} || $::isWizard, 
-		       0, $mainw->create_okcancel($common->{ok}, $common->{cancel}, '', @$l2 ? $advanced_button : ())));
-    my @adv = map { warp_text($_) } @{$common->{advanced_messages}};
-    $always_total_size += $mainw->{box_size};
-    $advanced_pack = 
-      gtkpack_(new Gtk::VBox(0,0),
-	       0, '',
-	       (map {; 0, new Gtk::Label($_) } @adv),
-	       0, new Gtk::HSeparator,
-	       1, $create_widgets->(@widgets_advanced));
-
-    $pack->pack_start($advanced_pack, 1, 1, 0);
-    gtkadd($mainw->{window}, $pack);
-    if (!$::isEmbedded && !$::isWizard || $my_gtk::pop_it) {
-	$mainw->{rwindow}->set_default_size($mainw->{box_width}+6+$my_gtk::shape_width, $mainw->{box_height}+6+3+$my_gtk::shape_width) if $has_scroll;
-	$mainw->{rwindow}->set_default_size($mainw->{box_width}+6+$my_gtk::shape_width, 0) if $has_horiz_scroll;
-    }
-    $set_advanced->(0);
-    (@widgets ? $widgets[0]{focus_w} : $common->{focus_cancel} ? $mainw->{cancel} : $mainw->{ok})->grab_focus();
-
-    my $check = sub {
-	my ($f) = @_;
-	sub {
-	    $get_all->();
-	    my ($error, $focus) = $f->();
-	
-	    if ($error) {
-		$set_all->();
-		$widgets[$focus || 0]{focus_w}->grab_focus();
-	    }
-	    !$error;
-	}
-    };
-    $mainw->main(map { $check->($common->{callbacks}{$_}) } 'complete', 'canceled');
-}
-
-
-sub ask_browse_tree_info_refW {
-    my ($o, $common) = @_;
-    my ($curr, $parent, $info_widget, $w_size, $prev_label, $go, $idle);
-    my (%wtree, %ptree, %pix);
-
-    my $w = my_gtk->new($common->{title});
-    my $details = new Gtk::VBox(0,0);
-    my $tree = Gtk::CTree->new(3, 0);
-    $tree->set_selection_mode('browse');
-    $tree->set_column_width(0, 200);
-    $tree->set_column_auto_resize($_, 1) foreach 1..2;
-
-    gtkadd($w->{window}, 
-	   gtkpack_(new Gtk::VBox(0,5),
-		    0, $common->{message},
-		    1, gtkpack(new Gtk::HBox(0,0),
-			       createScrolledWindow($tree),
-			       gtkadd(gtkset_usize(new Gtk::Frame(_("Info")), $::windowwidth - 490, 0),
-				      createScrolledWindow($info_widget = new Gtk::Text),
-				     )),
-		    0, my $l = new Gtk::HBox(0,15),
-		    0, gtkpack(new Gtk::HBox(0,10),
-			       $go = gtksignal_connect(new Gtk::Button($common->{ok}), "clicked" => sub { $w->{retval} = 1; Gtk->main_quit }),
-			       $common->{cancel} ? (gtksignal_connect(new Gtk::Button($common->{cancel}), "clicked" => sub { $w->{retval} = 0; Gtk->main_quit })) : (),
-			      )
-    ));
-    gtkpack__($l, my $toolbar = new Gtk::Toolbar('horizontal', 'icons'));
-    if ($common->{auto_deps}) {
-	gtkpack__($l, gtksignal_connect(gtkset_active(new Gtk::CheckButton($common->{auto_deps}), $common->{state}{auto_deps}), clicked => sub { invbool \$common->{state}{auto_deps} }));
-    }
-    $l->pack_end($w_size = new Gtk::Label($prev_label = $common->{state}{status_label}), 0, 1, 20);
-
-    $w->{window}->set_usize(map { $_ - 2 * $my_gtk::border - 4 } $::windowwidth, $::windowheight);
-    $go->grab_focus;
-    $w->{rwindow}->show_all;
-
-    my $update_size = sub {
-	my $new_label = $common->{get_status}();
-	$prev_label ne $new_label and $w_size->set($prev_label = $new_label);
-    };
-    
-    my $set_node_state_flat = sub {
-	my ($node, $state) = @_;
-	unless ($pix{$state}) {
-	    foreach ("$ENV{SHARE_PATH}/$state.png", "$ENV{SHARE_PATH}/rpm-$state.png") {
-		if (-e $_) {
-		    $pix{$state} = [ gtkcreate_png($_) ];
-		    last;
-		}
-	    }
-	    $pix{$state} or die "unable to find a pixmap for state $state";
-	}
-	$tree->node_set_pixmap($node, 1, $pix{$state}[0], $pix{$state}[1]);
-    };
-    my $set_node_state_tree; $set_node_state_tree = sub {
-	my ($node, $state) = @_;
-	unless ($pix{$state}) {
-	    foreach ("$ENV{SHARE_PATH}/$state.png", "$ENV{SHARE_PATH}/rpm-$state.png") {
-		if (-e $_) {
-		    $pix{$state} = [ gtkcreate_png($_) ];
-		    last;
-		}
-	    }
-	    $pix{$state} or die "unable to find a pixmap for state $state";
-	}
-	if ($node->{state} ne $state) {
-	    if ($node->row->is_leaf) {
-		my $parent = $node->row->parent;
-		my $stats = $parent->{state_stats} ||= {}; --$stats->{$node->{state}}; ++$stats->{$state};
-		my @list = grep { $stats->{$_} > 0 } keys %$stats;
-		my $new_state = @list == 1 ? $list[0] : 'semiselected';
-		$parent->{state} ne $new_state and $set_node_state_tree->($parent, $new_state);
-	    }
-	    $tree->node_set_pixmap($node, 1, $pix{$state}[0], $pix{$state}[1]);
-	    $node->{state} = $state; #- hack to to get this features efficiently.
-	}
-    };
-    my $set_node_state = $common->{state}{flat} ? $set_node_state_flat : $set_node_state_tree;
-
-    my $set_leaf_state = sub {
-	my ($leaf, $state) = @_;
-	$set_node_state->($_, $state) foreach @{$ptree{$leaf}};
-    };
-    my $add_parent; $add_parent = sub {
-	my ($root, $state) = @_;
-	$root or return undef;
-	if (my $w = $wtree{$root}) { return $w }
-	my $s; foreach (split '\|', $root) {
-	    my $s2 = $s ? "$s|$_" : $_;
-	    $wtree{$s2} ||= do {
-		my $n = $tree->insert_node($s ? $add_parent->($s, $state) : undef, undef, [$_, '', ''], 5, (undef) x 4, 0, 0);
-		$n;
-	    };
-	    $s = $s2;
-	}
-	$set_node_state->($wtree{$s}, $state); #- use this state by default as tree is building.
-	$wtree{$s};
-    };
-    my $add_node = sub {
-	my ($leaf, $root) = @_;
-	my $state = $common->{node_state}($leaf) or return;
-	my $node = $tree->insert_node($add_parent->($root, $state), undef, [$leaf, '', ''], 5, (undef) x 4, 1, 0);
-	$set_node_state->($node, $state);
-	push @{$ptree{$leaf}}, $node;
-    };
-    my $add_nodes = sub {
-	foreach (values %ptree) {
-	    delete $_->{state} foreach @$_;
-	}
-	foreach (values %wtree) {
-	    delete $_->{state};
-	    delete $_->{state_stats};
-	}
-	%ptree = %wtree = ();
-
-	$tree->freeze;
-	while (1) { $tree->remove_node($tree->node_nth(0) || last) }
-
-	$common->{state}{flat} = $_[0];
-	$set_node_state = $common->{state}{flat} ? $set_node_state_flat : $set_node_state_tree;
-	$common->{build_tree}($add_node, $common->{state}{flat});
-
-	$tree->thaw;
-	&$update_size;
-    };
-    $add_nodes->($common->{state}{flat});
-
-    my @toolbar = (ftout  =>  [ _("Expand Tree") , sub { $tree->expand_recursive(undef) } ],
-		   ftin   =>  [ _("Collapse Tree") , sub { $tree->collapse_recursive(undef) } ],
-		   reload =>  [ _("Toggle between flat and group sorted"), sub { $add_nodes->(!$common->{state}{flat}) } ]);
-    foreach my $ic (@{$common->{icons} || []}) {
-	push @toolbar, ( $ic->{icon} => [ $ic->{help}, sub {
-					     if ($ic->{code}) {
-						 my $w = $ic->{wait_message} && $o->wait_message('', $ic->{wait_message});
-						 $ic->{code}();
-						 $add_nodes->($common->{state}{flat});
-					     }
-					 } ]);
-    }
-    my %toolbar = @toolbar;
-    $toolbar->set_button_relief("none");
-    foreach (grep_index { $::i % 2 == 0 } @toolbar) {
-	gtksignal_connect($toolbar->append_item(undef, $toolbar{$_}[0], undef, gtkpng("$ENV{SHARE_PATH}/$_.png")),
-			  clicked => $toolbar{$_}[1]);
-    }
-    $toolbar->set_style("icons");
-
-    my $display_info = sub { gtktext_insert($info_widget, $common->{get_info}($curr)); 0 };
-    my $children = sub { map { ($tree->node_get_pixtext($_, 0))[0] } gtkctree_children($_[0]) };
-    my $toggle = sub {
-	if (ref $curr && ! $_[0]) {
-	    $tree->toggle_expansion($curr);
-	} else {
-	    if (ref $curr) {
-		my @l = $common->{grep_allowed_to_toggle}($children->($curr)) or return;
-		my @unsel = $common->{grep_unselected}(@l);
-		my @p = @unsel ?
-		  @unsel : # not all is selected, select all
-		    @l;
-		$common->{toggle_nodes}($set_leaf_state, @p);
-		&$update_size;
-		$parent = $curr;
-	    } else {
-		$common->{check_interactive_to_toggle}($curr) and $common->{toggle_nodes}($set_leaf_state, $curr);
-		&$update_size;
-	    }
-	}
-    };
-
-    $tree->signal_connect(key_press_event => sub {
-        my ($w, $e) = @_;
-	my $c = chr($e->{keyval} & 0xff);
-	$toggle->(0) if $e->{keyval} >= 0x100 ? $c eq "\r" || $c eq "\x8d" : $c eq ' ';
-	1;
-    });
-    $tree->signal_connect(tree_select_row => sub {
-	Gtk->timeout_remove($idle) if $idle;
-
-	if ($_[1]->row->is_leaf) {
-	    ($curr) = $tree->node_get_pixtext($_[1], 0);
-	    $parent = $_[1]->row->parent;
-	    $idle = Gtk->timeout_add(100, $display_info);
-	} else {
-	    $curr = $_[1];
-	}
-	$toggle->(1) if $_[2] == 1;
-    });
-    &$update_size;
-    my $b = before_leaving { #- ensure cleaning here.
-	foreach (values %ptree) {
-	    delete $_->{state} foreach @$_;
-	}
-	foreach (values %wtree) {
-	    delete $_->{state};
-	    delete $_->{state_stats};
-	}
-    };
-    $w->main;
-}
-
-sub wait_messageW($$$) {
-    my ($o, $title, $messages) = @_;
-
-    local $my_gtk::pop_it = 1;
-    my $w = my_gtk->new($title, %$o, grab => 1);
-    gtkadd($w->{window}, my $hbox = new Gtk::HBox(0,0));
-    $hbox->pack_start(my $box = new Gtk::VBox(0,0), 1, 1, 10);  
-    $box->pack_start($_, 1, 1, 4) foreach my @l = map { new Gtk::Label(join("\n", warp_text($_))) } @$messages;
-
-    ($w->{wait_messageW} = $l[$#l])->signal_connect(expose_event => sub { $w->{displayed} = 1 });
-    $w->{rwindow}->set_position('center') if ($::isStandalone && (!$::isEmbedded && !$::isWizard || $my_gtk::pop_it));
-    $w->{window}->show_all;
-    $w->sync until $w->{displayed};
-    $w;
-}
-sub wait_message_nextW {
-    my ($o, $messages, $w) = @_;
-    my $msg = join("\n", warp_text(join "\n", @$messages));
-    return if $msg eq $w->{wait_messageW}->get; #- needed otherwise no expose_event :(
-    $w->{displayed} = 0;
-    $w->{wait_messageW}->set($msg);
-    $w->flush until $w->{displayed};
-}
-sub wait_message_endW {
-    my ($o, $w) = @_;
-    $w->destroy;
-}
-
-sub kill {
-    my ($o) = @_;
-    $o->{before_killing} ||= 0;
-
-    while (my $e = shift @tempory::objects) { $e->destroy }
-    while (@interactive::objects > $o->{before_killing}) {
-	my $w = pop @interactive::objects;
-	$w->destroy;
-    }
-    $o->{before_killing} = @interactive::objects;
-}
-
-1;
diff --git a/perl-install/interactive_http.pm b/perl-install/interactive_http.pm
deleted file mode 100644
index 18bff77fe..000000000
--- a/perl-install/interactive_http.pm
+++ /dev/null
@@ -1,159 +0,0 @@
-package interactive_http; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(interactive);
-
-use CGI;
-use interactive;
-use common;
-use log;
-
-my $script_name = $ENV{INTERACTIVE_HTTP};
-my $no_header;
-my $uid;
-my $pipe_r = "/tmp/interactive_http_r";
-my $pipe_w = "/tmp/interactive_http_w";
-
-sub open_stdout {
-    open STDOUT, ">$pipe_w" or die;
-    $| = 1;
-    print CGI::header();
-    $no_header = 1;    
-}
-
-# cont_stdout must be called after open_stdout and before the first print
-sub cont_stdout {
-    my ($title) = @_;
-    print CGI::start_html(-title => $title) if $no_header;
-    $no_header = 0;
-}
-
-sub new_uid {
-    my ($s, $ms) = gettimeofday();
-    $s * 256 + $ms % 256;
-}
-
-sub new() {
-    open_stdout();
-    bless {}, $_[0];
-}
-
-sub end() { 
-    -e $pipe_r or return; # don't run this twice
-    my $q = CGI->new;
-    cont_stdout("Exit");
-    print "It's done, thanks for playing", $q->end_html;
-    close STDOUT;
-    unlink $pipe_r, $pipe_w;
-}
-sub exit() { end; exit($_[1]) }
-END { end() }
-
-sub ask_fromW {
-    my ($o, $common, $l, $l2) = @_;
-
-  redisplay:
-    my $uid = new_uid();
-    my $q = CGI->new;
-    $q->param(state => 'next_step');
-    $q->param(uid => $uid);
-    cont_stdout($common->{title});
-
-#    print $q->img({ -src => "/icons/$o->{icon}" }) if $o->{icon};
-    print @{$common->{messages}};
-    print $q->start_form(-name => 'form', -action => $script_name, -method => 'post');
-
-    print "<table>\n";
-
-    map_index {
-	my $e = $_;
-
-	print "<tr><td>$e->{label}</td><td>\n";
-
-	$e->{type} = 'list' if $e->{type} =~ /(icon|tree)list/;
-
-	#- combo doesn't exist, fallback to a sensible default
-	$e->{type} = $e->{not_edit} ? 'list' : 'entry' if $e->{type} eq 'combo';
-
-	if ($e->{type} eq 'bool') {
-	    print $q->checkbox(-name => "w$::i", -checked => ${$e->{val}} && 'on', -label => $e->{text} || " ");
-	} elsif ($e->{type} eq 'button') {
-	    print "nobuttonyet";
-	} elsif ($e->{type} =~ /list/) {
-	    my %t; 
-	    $t{$_} = may_apply($e->{format}, $_) foreach @{$e->{list}};
-
-	    print $q->scrolling_list(-name => "w$::i",
-				     -values => $e->{list},
-				     -default => [ ${$e->{val}} ],
-				     -size => 5, -multiple => '', -labels => \%t);
-	} else {
-	    print $e->{hidden} ?
-	      $q->password_field(-name => "w$::i", -default => ${$e->{val}}) :
-	      $q->textfield     (-name => "w$::i", -default => ${$e->{val}});
-	}
-
-	print "</td></tr>\n";
-    } @$l;
-
-    print "</table>\n";
-    print $q->p();
-    print $q->submit(-name => 'ok_submit', -value => $common->{ok} || _("Ok"));
-    print $q->submit(-name => 'cancel_submit', -value => $common->{cancel}) if $common->{cancel};
-    print $q->hidden('state'), $q->hidden('uid');
-    print $q->end_form, $q->end_html;
-
-    close STDOUT; # page terminated
-
-    while (1) {	
-	local *F;
-	open F, "<$pipe_r" or die;
-	$q = CGI->new(\*F);
-	$q->param('force_exit_dead_prog') and $o->exit;
-	last if $q->param('uid') == $uid;
-
-	open_stdout(); # re-open for writing
-	cont_stdout(_("Error"));
-	print $q->h1(_("Error")), $q->p("Sorry, you can't go back");
-	goto redisplay;
-    }
-    map_index {
-	my $e = $_;
-	my $v = $q->param("w$::i");
-	if ($e->{type} eq 'bool') {
-	    $v = $v eq 'on';
-	}
-	${$e->{val}} = $v;
-    } @$l;
-
-    open_stdout(); # re-open for writing
-    $q->param('ok_submit');
-}
-
-sub p {
-    print "\n" . CGI::br($_) foreach @_;
-}
-
-sub wait_messageW {
-    my ($o, $title, $messages) = @_;
-    cont_stdout();
-    print "\n" . CGI::p();
-    p(@$messages);
-}
-
-sub wait_message_nextW {
-    my ($o, $messages, $w) = @_;
-    p(@$messages);
-}
-sub wait_message_endW {
-    my ($o, $w) = @_;
-    p(_("Done"));
-    print "\n" . CGI::p();
-}
-
-
-
-1;
diff --git a/perl-install/interactive_newt.pm b/perl-install/interactive_newt.pm
deleted file mode 100644
index abdb09503..000000000
--- a/perl-install/interactive_newt.pm
+++ /dev/null
@@ -1,245 +0,0 @@
-package interactive_newt; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(interactive);
-
-use interactive;
-use common;
-use log;
-use Newt::Newt; #- !! provides Newt and not Newt::Newt
-
-my ($width, $height) = (80, 25);
-my @wait_messages;
-
-sub new() {
-    Newt::Init;
-    Newt::Cls;
-    Newt::SetSuspendCallback;
-    ($width, $height) = Newt::GetScreenSize;
-    open STDERR,">/dev/null" if $::isStandalone;
-    bless {}, $_[0];
-}
-
-sub enter_console { Newt::Suspend }
-sub leave_console { Newt::Resume }
-sub suspend { Newt::Suspend }
-sub resume { Newt::Resume }
-sub end() { Newt::Finished }
-sub exit() { end; exit($_[1]) }
-END { end() }
-
-sub myTextbox {
-    my $allow_scroll = shift;
-
-    my $width = $width - 9;
-    my @l = map { /(.{1,$width})/g } map { split "\n" } @_;
-    my $h = min($height - 13, int @l);
-    my $flag = 1 << 6; 
-    if ($h < @l) {
-	if ($allow_scroll) {
-	    $flag |= 1 << 2; #- NEWT_FLAG_SCROLL
-	} else {
-	    # remove the text, no other way!
-	    @l = @l[0 .. $h-1];
-	}
-    }
-    my $mess = Newt::Component::Textbox(1, 0, my $w = max(map { length } @l) + 1, $h, $flag);
-    $mess->TextboxSetText(join("\n", @_));
-    $mess, $w + 1, $h;
-}
-
-sub separator {
-    my $blank = Newt::Component::Form(\undef, '', 0);
-    $blank->FormSetWidth ($_[0]);
-    $blank->FormSetHeight($_[1]);
-    $blank;
-}
-sub checkval { $_[0] && $_[0] ne ' '  ? '*' : ' ' }
-
-sub ask_fromW {
-    my ($o, $common, $l, $l2) = @_;
-    my $ignore; #-to handle recursivity
-    my $old_focus = -2;
-
-    #-the widgets
-    my (@widgets, $total_size);
-
-    my $set_all = sub {
-	$ignore = 1;
-	$_->{set}->(${$_->{e}{val}}) foreach @widgets;
-#	$_->{w}->set_sensitive(!$_->{e}{disabled}()) foreach @widgets;
-	$ignore = 0;
-    };
-    my $get_all = sub {
-	${$_->{e}{val}} = $_->{get}->() foreach @widgets;
-    };
-    my $create_widget = sub {
-	my ($e, $ind) = @_;
-
-	$e->{type} = 'list' if $e->{type} =~ /(icon|tree)list/;
-
-	#- combo doesn't exist, fallback to a sensible default
-	$e->{type} = $e->{not_edit} ? 'list' : 'entry' if $e->{type} eq 'combo';
-
-	my $changed = sub {
-	    return if $ignore;
-	    return $old_focus++ if $old_focus == -2; #- handle special first case
-	    $get_all->();
-
-	    #- TODO: this is very rough :(
-	    $common->{callbacks}{$old_focus == $ind ? 'changed' : 'focus_out'}->($ind);
-
-	    $set_all->();
-	    $old_focus = $ind;
-	};
-
-	my ($w, $real_w, $set, $get, $expand, $size);
-	if ($e->{type} eq 'bool') {
-	    $w = Newt::Component::Checkbox(-1, -1, $e->{text} || '', checkval(${$e->{val}}), " *");
-	    $set = sub { $w->CheckboxSetValue(checkval($_[0])) };
-	    $get = sub { $w->CheckboxGetValue == ord '*' };
-	} elsif ($e->{type} eq 'button') {
-	    $w = Newt::Component::Button(-1, -1, may_apply($e->{format}, ${$e->{val}}));
-	} elsif ($e->{type} =~ /list/) {
-	    my ($h, $wi) = (@$l == 1 && $height > 30 ? 10 : 5, 20);
-	    my $scroll = @{$e->{list}} > $h ? 1 << 2 : 0;
-	    $size = min(int @{$e->{list}}, $h);
-
-	    $w = Newt::Component::Listbox(-1, -1, $h, $scroll); #- NEWT_FLAG_SCROLL	    
-	    foreach (@{$e->{list}}) {
-		my $t = may_apply($e->{format}, $_);
-		$w->ListboxAddEntry($t, $_);
-		$wi = max($wi, length $t);
-	    }
-	    $w->ListboxSetWidth(min($wi + 3, $width - 7)); # 3 added for the scrollbar (?)
-	    $get = sub { $w->ListboxGetCurrent };
-	    $set = sub {
-		my ($val) = @_;
-		map_index {
-		    $w->ListboxSetCurrent($::i) if $val eq $_;
-		} @{$e->{list}};
-	    };
-	} else {
-	    $w = Newt::Component::Entry(-1, -1, '', 20, ($e->{hidden} && 1 << 11) | 1 << 2);
-	    $get = sub { $w->EntryGetValue };
-	    $set = sub { $w->EntrySet($_[0], 1) };
-	}
-	$total_size += $size || 1;
-
-	#- !! callbacks must be kept otherwise perl will free them !!
-	#- (better handling of addCallback needed)
-
-	{ e => $e, w => $w, real_w => $real_w || $w, expand => $expand, callback => $changed,
-	  get => $get || sub { ${$e->{val}} }, set => $set || sub {} };
-    };
-    @widgets = map_index { $create_widget->($_, $::i) } @$l;
-
-    $_->{w}->addCallback($_->{callback}) foreach @widgets;
-
-    $set_all->();
-
-    my $grid = Newt::Grid::CreateGrid(3, max(1, int @$l));
-    map_index {
-	$grid->GridSetField(0, $::i, 1, ${Newt::Component::Label(-1, -1, $_->{e}{label})}, 0, 0, 1, 0, 1, 0);
-	$grid->GridSetField(1, $::i, 1, ${$_->{real_w}}, 0, 0, 0, 0, 1, 0);
-    } @widgets;
-
-    my $listg = do {
-	my $height = 18;
-	#- use a scrolled window if there is a lot of checkboxes (aka 
-	#- ask_many_from_list) or a lot of widgets in general (aka
-	#- options of a native PostScript printer in printerdrake)
-	#- !! works badly together with list's (lists are one widget, so a
-	#- big list window will not switch to scrollbar mode) :-(
-	if ((((grep { $_->{type} eq 'bool' } @$l) > 6) ||
-             ((@$l) > 3)) && $total_size > $height) {
-	    $grid->GridPlace(1, 1); #- Uh?? otherwise the size allocated is bad
-
-	    my $scroll = Newt::Component::VerticalScrollbar(-1, -1, $height, 9, 10);
-	    my $subf = $scroll->Form('', 0);
-	    $subf->FormSetHeight($height);
-	    $subf->FormAddGrid($grid, 0);
-	    Newt::Grid::HCloseStacked($subf, separator(1, $height), $scroll);
-	} else {
-	    $grid;
-	}
-    };
-    my ($buttons, $ok, $cancel) = Newt::Grid::ButtonBar($common->{ok} || _("Ok"), if_($common->{cancel}, $common->{cancel}));
-
-    my $form = Newt::Component::Form(\undef, '', 0);
-    my $window = Newt::Grid::GridBasicWindow(first(myTextbox(@widgets == 0, @{$common->{messages}})), $listg, $buttons);
-    $window->GridWrappedWindow($common->{title} || '');
-    $form->FormAddGrid($window, 1);
-
-    my $check = sub {
-	my ($f) = @_;
-
-	$get_all->();
-	my ($error, $focus) = $f->();
-	
-	if ($error) {
-	    $set_all->();
-	}
-	!$error;
-    };
-
-    my ($destroyed, $canceled);
-    do {
-	my $r = $form->RunForm;
-	foreach (@widgets) {
-	    if ($$r == ${$_->{w}}) {
-		$destroyed = 1;
-		$form->FormDestroy;
-		Newt::PopWindow;
-		my $v = $_->{e}{clicked_may_quit}();
-		$v or return ask_fromW($o, $common, $l, $l2);
-	    }
-	}
-	$canceled = $cancel && $$r == $$cancel;
-
-    } until ($check->($common->{callbacks}{$canceled ? 'canceled' : 'complete'}));
-
-    if (!$destroyed) {
-	$form->FormDestroy;
-	Newt::PopWindow;
-    }
-    !$canceled;
-}
-
-
-sub waitbox {
-    my ($title, $messages) = @_;
-    my ($t, $w, $h) = myTextbox(1, @$messages);
-    my $f = Newt::Component::Form(\undef, '', 0);
-    Newt::CenteredWindow($w, $h, $title);
-    $f->FormAddComponent($t);
-    $f->DrawForm;
-    Newt::Refresh;
-    $f->FormDestroy;
-    push @wait_messages, $f;
-    $f;
-}
-
-
-sub wait_messageW {
-    my ($o, $title, $messages) = @_;
-    { form => waitbox($title, $messages), title => $title };
-}
-
-sub wait_message_nextW {
-    my ($o, $messages, $w) = @_;
-    $o->wait_message_endW($w);
-    $o->wait_messageW($w->{title}, $messages);
-}
-sub wait_message_endW {
-    my ($o, $w) = @_;
-    my $wait = pop @wait_messages;
-#    log::l("interactive_newt does not handle none stacked wait-messages") if $w->{form} != $wait;
-    Newt::PopWindow;
-}
-
-
-1;
diff --git a/perl-install/interactive_stdio.pm b/perl-install/interactive_stdio.pm
deleted file mode 100644
index ef77e8884..000000000
--- a/perl-install/interactive_stdio.pm
+++ /dev/null
@@ -1,171 +0,0 @@
-package interactive_stdio; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(interactive);
-
-use interactive;
-use common;
-
-$| = 1;
-
-sub readln {
-    my $l = <STDIN>;
-    chomp $l;
-    $l;
-}
-
-sub check_it {
-    my ($i, $n) = @_;
-    $i =~ /^\s*\d+\s*$/ && 1 <= $i && $i <= $n
-}
-
-sub good_choice {
-    my ($def_s, $max) = @_;
-    my $i;
-    do {
-	defined $i and print _("Bad choice, try again\n");
-	print _("Your choice? (default %s) ", $def_s);
-	$i = readln();
-    } until (!$i || check_it($i, $max));
-    $i;
-}
-
-sub ask_fromW {
-    my ($o, $common, $l, $l2) = @_;
-
-ask_fromW_begin:
-
-    my $already_entries = 0;
-    my $predo_widget = sub {
-	my ($e) = @_;
-
-	$e->{type} = 'list' if $e->{type} =~ /(icon|tree)list/;
-	#- combo doesn't exist, fallback to a sensible default
-	$e->{type} = $e->{not_edit} ? 'list' : 'entry' if $e->{type} eq 'combo';
-
-	if ($e->{type} eq 'entry') {
-	    my $t = "\t$e->{label} $e->{text}\n";
-	    if ($already_entries) {
-		length($already_entries) > 1 and print _("Entries you'll have to fill:\n%s", $already_entries);
-		$already_entries = 1;
-		print $t;
-	    } else {
-		$already_entries = $t;
-	    }
-	}
-    };
-
-    my @labels = ();
-    my $format_label = sub { my ($e) = @_; return "`${$e->{val}}' $e->{label} $e->{text}\n"; };
-    my $do_widget = sub {
-	my ($e, $ind) = @_;
-
-	if ($e->{type} eq 'bool') {
-	    print "$e->{text} $e->{label}\n";
-	    print _("Your choice? (0/1, default `%s') ", ${$e->{val}} || '0');
-	    my $i = readln();
-	    if ($i ne '') {
-		to_bool($i) != to_bool(${$e->{val}}) and $common->{callbacks}{changed}->($ind);
-		${$e->{val}} = $i;
-	    }
-	} elsif ($e->{type} =~ /list/) {
-	    ($e->{text} || $e->{label}) and print "=> $e->{label} $e->{text}\n";
-	    my $n = 0; my $size = 0; my $def_n = 0;
-	    foreach (@{$e->{list}}) {
-		$n++;
-		my $t = "$n: " . may_apply($e->{format}, $_) . "\t";
-		if ($size + length($t) >= 80) {
-		    print "\n";
-		    $size = 0;
-		}
-		print $t;
-		$size += length($t);
-		${$e->{val}} eq $_ and $def_n = $n;
-	    }
-	    print "\n";
-	    my $i = good_choice(may_apply($e->{format}, ${$e->{val}}), $n);
-	    print "Setting to <", $i ? ${$e->{list}}[$i-1] : ${$e->{val}}, ">\n";
-	    $i and ${$e->{val}} = ${$e->{list}}[$i-1], $common->{callbacks}{changed}->($ind);
-	} elsif ($e->{type} eq 'button') {
-	    print _("Button `%s': %s", $e->{label}, may_apply($e->{format}, ${$e->{val}})), " $e->{text}\n";
-	    print _("Do you want to click on this button? ");
-	    my $i = readln();
-	    ($i && $i !~ /^n/i) and $e->{clicked_may_quit}(), $common->{callbacks}{changed}->($ind);
-	} elsif ($e->{type} eq 'label') {
-	    my $t = $format_label->($e);
-	    push @labels, $t;
-	    print $t;
-	} elsif ($e->{type} eq 'entry') {
-	    print "$e->{label} $e->{text}\n";
-	    print _("Your choice? (default `%s'%s) ", ${$e->{val}}, ${$e->{val}} ne '' ? " enter `void' for void entry" : '');
-	    my $i = readln();
-	    ${$e->{val}} = $i || ${$e->{val}};
-	    ${$e->{val}} = '' if ${$e->{val}} eq 'void';
-	    print "Setting to <${$e->{val}}>\n";
-	    $i and $common->{callbacks}{changed}->($ind);
-	} else {
-	    print "UNSUPPORTED WIDGET TYPE (type <$e->{type}> label <$e->{label}> text <$e->{text}> val <${$e->{val}}>\n";
-	}
-    };
-
-    print "* ";
-    $common->{title} and print "$common->{title}\n";
-    print map { "$_\n" } @{$common->{messages}};
-
-    $predo_widget->($_) foreach (@$l);
-    if (listlength(@$l) > 30) {
-	my $ll = listlength(@$l);
-	print _("=> There are many things to choose from (%s).\n", $ll);
-ask_fromW_handle_verylonglist:
-	print _(
-"Please choose the first number of the 10-range you wish to edit,
-or just hit Enter to proceed.
-Your choice? ");
-	my $i = readln();
-	if (check_it($i, $ll)) {
-	    map_index { $do_widget->($_, $::i) } grep_index { $::i >= $i-1 && $::i < $i+9 } @$l;
-	    goto ask_fromW_handle_verylonglist;
-	}
-    } else {
-	map_index { $do_widget->($_, $::i) } @$l;
-    }
-
-    my $lab;
-    map_index { $labels[$::i] && (($lab = $format_label->($_)) ne $labels[$::i]) and print _("=> Notice, a label changed:\n%s", $lab); }
-      grep { $_->{type} eq 'label' } @$l;
-
-    my $i;
-    if (listlength(@$l) != 1 || $common->{ok} ne _("Ok") || $common->{cancel} ne _("Cancel")) {
-	print "[1] ", $common->{ok} || _("Ok");
-	$common->{cancel} and print "  [2] $common->{cancel}";
-	@$l and print "  [9] ", _("Re-submit");
-	print "\n";
-	do {
-	    defined $i and print _("Bad choice, try again\n");
-	    print _("Your choice? (default %s) ", $common->{focus_cancel} ? $common->{cancel} : $common->{ok});
-	    $i = readln() || ($common->{focus_cancel} ? "2" : "1");
-	} until (check_it($i, 9));
-	$i == 9 and goto ask_fromW_begin;
-    } else {
-	$i = 1;
-    }
-    my ($callback_error) = $common->{callbacks}{$i == 2 ? 'canceled' : 'complete'}->();
-    $callback_error and goto ask_fromW_begin;
-    return !($i == 2);
-}
-
-sub wait_messageW {
-    my ($o, $title, $message) = @_;
-    print join "\n", @$message;
-}
-sub wait_message_nextW { 
-    my $m = join "\n", @{$_[1]};
-    print "\r$m", ' ' x (60 - length $m);
-}
-sub wait_message_endW { print "\nDone\n" }
-
-1;
-
diff --git a/perl-install/keyboard.pm b/perl-install/keyboard.pm
deleted file mode 100644
index 879e847f4..000000000
--- a/perl-install/keyboard.pm
+++ /dev/null
@@ -1,418 +0,0 @@
-
-package keyboard; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use detect_devices;
-use run_program;
-use log;
-use c;
-
-
-#-######################################################################################
-#- Globals
-#-######################################################################################
-my $KMAP_MAGIC = 0x8B39C07F;
-
-#- a best guess of the keyboard layout, based on the choosen locale
-#- beware only the first 5 characters are used
-my %lang2keyboard =
-(
-  'af' => 'us_intl',
-#-'ar' => 'ar:80 ar_d:70 ar_azerty:60 ar_azerty_d:50',
-  'az' => 'az:80 tr:10 us_intl:5',
-'az_AZ'=> 'az:80 tr:10 us_intl:5',
-  'be' => 'by:80 ru:50 ru_yawerty:40',
-'be_BY'=> 'by:80 ru:50 ru_yawerty:40',
-  'bg' => 'bg:90',
-'bg_BG'=> 'bg:90',
-  'br' => 'fr:90',
-  'bs' => 'hr:60 yu:50 si:40',
-  'ca' => 'es:89 fr:15',
-'ca_ES'=> 'es:89 fr:15',
-  'cs' => 'cz_qwerty:70 cz:50 cz_prog:10',
-  'cy' => 'uk:90',
-  'da' => 'dk:90',
-'da_DK'=> 'dk:90',
-  'de' => 'de_nodeadkeys:70 de:50',
-'de_AT'=> 'de_nodeadkeys:70 de:50',
-'de_BE'=> 'be:70 de_nodeadkeys:60 de:50',
-'de_CH'=> 'ch_de:70 ch_fr:25 de_nodeadkeys:20 de:15',
-'de_DE'=> 'de_nodeadkeys:70 de:50', 
-'de_LU'=> 'de_nodeadkeys:70 de:50 fr:40 be:35', 
-  'el' => 'gr:90',
-'el_GR'=> 'gr:90',
-  'en' => 'us:90 us_intl:50',
-'en_US'=> 'us:90 us_intl:50',
-'en_GB'=> 'uk:89 us:60 us_intl:50',
-'en_IE'=> 'uk:89 us:60 us_intl:50',
-  'eo' => 'us_intl:89 dvorak:20',
-  'es' => 'es:85 la:80 us_intl:50',
-'es@tr'=> 'es:85 la:80 us_intl:50',
-'es_AR'=> 'la:80 us_intl:50 es:20',
-'es_ES'=> 'es:90',
-'es_MX'=> 'la:80 us_intl:50 es:20',
-  'et' => 'ee:90',
-  'eu' => 'es:89 fr:15',
-'eu_ES'=> 'es:89 fr:15',
-  'fa' => 'ir:90',
-  'fi' => 'fi:90',
-'fi_FI'=> 'fi:90',
-  'fr' => 'fr:90',
-'fr_BE'=> 'be:85 fr:5',
-'fr_CA'=> 'qc:85 fr:5',
-'fr_CH'=> 'ch_fr:70 ch_de:15 fr:10',
-'fr_FR'=> 'fr:90',
-'fr_LU'=> 'fr:70 de_nodeadkeys:50 de:40 be:35', 
-  'ga' => 'uk:90',
-'ga_IE'=> 'uk:90',
-  'gd' => 'uk:90',
-  'gl' => 'es:90',
-  'gv' => 'uk:90',
-  'he' => 'il:89 il_phonetic:10',
-  'hr' => 'hr:80 si:50',
-  'hu' => 'hu:90',
-  'hy' => 'am:80 am_old:10 am_phonetic:5',
-  'id' => 'us:90 us_intl:20',
-  'is' => 'is:90',
-  'iu' => 'iu:90',
-'it_CH' => 'ch_fr:80 ch_de:60 it:50',
-'it_IT' => 'it:90',
-  'ja' => 'jp:80 us:50 us_intl:20',
-  'ka' => 'ge_la:80 ge_ru:50',
-'ka_GE'=> 'ge_la:80 ge_ru:50',
-  'kl' => 'dk:80 us_intl:30',
-  'ko' => 'kr:80 us:60',
-  'kw' => 'uk:90',
-  'lo' => 'us:60',
-  'lt' => 'lt:80 lt_new:70 lt_b:60 lt_p:50',
-  'lv' => 'lv:80 lt:40 lt_new:30 lt_b:20 lt_p:10 ee:5',
-  'mi' => 'us_intl:60 uk:20 us:10',
-  'mk' => 'mk:80',
-  'ms' => 'us:90 us_intl:20',
-  'nb' => 'no:85 dvorak_no:10',
-'nl_BE'=> 'be:80 nl:10 us_intl:5',
-'nl_NL'=> 'us_intl:80 nl:15 us:10 uk:5',
-  'nn' => 'no:85 dvorak_no:10',
-  'no' => 'no:85 dvorak_no:10',
-  'oc' => 'fr:90',
-'oc_FR'=> 'fr:90',
-  'ph' => 'us:90 us_intl:20',
-  'pl' => 'pl:80 pl2:60',
-  'pp' => 'br:80 la:20 pt:10 us_intl:30',
-'pt_BR'=> 'br:80 la:20 pt:10 us_intl:30',
-'pt_PT'=> 'pt:80',
-  'ro' => 'ro2:80 ro:40 us-intl:10',
-  'ru' => 'ru:85 ru_yawerty:80',
-'ru_RU'=> 'ru:85 ru_yawerty:80',
-  'sk' => 'sk_qwerty:80 sk:70 sk_prog:50',
-  'sl' => 'si:80 hr:50',
-  'sp' => 'sr:80',
-  'sq' => 'al:80',
-  'sr' => 'yu:80',
-  'sv' => 'se:85 fi:30 dvorak_se:10',
-'sv_FI'=> 'fi:85 sv:20',
-'sv_SE'=> 'se:85 fi:20',
-  'tg' => 'tj:80 ru_yawerty:40',
-  'th' => 'th:90',
-  'tr' => 'tr_q:85 tr_q:30',
-  'tt' => 'ru:50 ru_yawerty:40',
-  'uk' => 'ua:85 ru:50 ru_yawerty:40',
-'uk_UA'=> 'ua:85 ru:50 ru_yawerty:40',
-  'uz' => 'us:80',
-  'vi' => 'vn:80 us:60 us_intl:50',
-'vi_VN'=> 'vn us:60 us_intl:50',
-  'wa' => 'be:85 fr:5',
-'wa_BE'=> 'be:85 fr:5',
-'zh_CN'=> 'us:60',
-'zh_TW'=> 'us:60',
-);
-
-#- key = extension for Xmodmap file, [0] = description of the keyboard,
-#- [1] = name for loadkeys, [2] = name for XKB
-my %keyboards = (
-arch() =~ /^sparc/ ? (
- "cz" => [ __("Czech (QWERTZ)"), "sunt5-cz-us", "cz" ],
- "de" => [ __("German"),         "sunt5-de-latin1", "de" ],
- "dvorak" => [ __("Dvorak"),     "sundvorak",   "dvorak" ],
- "es" => [ __("Spanish"),        "sunt5-es",    "es" ],
- "fi" => [ __("Finnish"),        "sunt5-fi-latin1", "fi" ],
- "fr" => [ __("French"),         "sunt5-fr-latin1", "fr" ],
- "no" => [ __("Norwegian"),      "sunt4-no-latin1", "no" ],
- "pl" => [ __("Polish"),         "sun-pl-altgraph", "pl" ],
- "ru" => [ __("Russian"),        "sunt5-ru",    "ru" ],
-# TODO: check the console map
- "se" => [ __("Swedish"),        "sunt5-fi-latin1",    "se" ],
- "uk" => [ __("UK keyboard"),    "sunt5-uk",    "gb" ],
- "us" => [ __("US keyboard"),    "sunkeymap",   "us" ],
-) : (
- "al" => [ __("Albanian"), "al", "al" ],
- "am_old" => [ __("Armenian (old)"),	"am_old",	"am(old)" ],
- "am" => [ __("Armenian (typewriter)"),	"am-armscii8",	"am" ],
- "am_phonetic" => [ __("Armenian (phonetic)"), "am_phonetic", "am(phonetic)" ],
-#-"ar_azerty" => [ __("Arabic (AZERTY)"),       "ar-8859_6",   "ar(azerty)" ],
-#-"ar_azerty_d" => [ __("Arabic (AZERTY, arabic digits)"),"ar-8859_6","ar(azerty_digits)" ],
-#-"ar" => [ __("Arabic (QWERTY)"),       "ar-8859_6",   "ar" ],
-#-"ar_d" => [ __("Arabic (QWERTY, arabic digits)"),"ar-8859_6","ar(digits)" ],
- "az" => [ __("Azerbaidjani (latin)"), "az",	"az" ],
-#"a3" => [ __("Azerbaidjani (cyrillic)"), "az-koi8k","az(cyrillic)" ],
- "be" => [ __("Belgian"),        "be2-latin1",   "be" ],
- "bg" => [ __("Bulgarian"),      "bg",          "bg" ],
- "br" => [ __("Brazilian (ABNT-2)"),      "br-abnt2",    "br" ],
- "by" => [ __("Belarusian"),      "by-cp1251",  "by" ],
- "ch_de" => [ __("Swiss (German layout)"), "sg-latin1", "de_CH" ],
- "ch_fr" => [ __("Swiss (French layout)"), "fr_CH-latin1", "fr_CH" ],
-#"cz" => [ __("Czech (QWERTZ)"), "cz-latin2",   "czsk(cz_us_qwertz)" ],
-#"cz_qwerty" => [ __("Czech (QWERTY)"), "cz-lat2", "czsk(cz_us_qwerty)" ],
-#"cz_prog" => [ __("Czech (Programmers)"), "cz-lat2-prog", "czsk(us_cz_prog)" ],
- "cz" => [ __("Czech (QWERTZ)"), "cz-latin2",   "cz" ],
- "cz_qwerty" => [ __("Czech (QWERTY)"), "cz-lat2", "cz_qwerty" ],
- "de" => [ __("German"),         "de-latin1",   "de" ],
- "de_nodeadkeys" => [ __("German (no dead keys)"), "de-latin1-nodeadkeys", "de(nodeadkeys)" ],
- "dk" => [ __("Danish"),         "dk-latin1",   "dk" ],
- "dvorak" => [ __("Dvorak (US)"),     "pc-dvorak-latin1", "dvorak" ],
- "dvorak_no" => [ __("Dvorak (Norwegian)"),     "no-dvorak", "dvorak(no)" ],
- "dvorak_se" => [ __("Dvorak (Swedish)"),       "se-dvorak", "dvorak(se)" ],
- "ee" => [ __("Estonian"),       "ee-latin9",   "ee" ],
- "es" => [ __("Spanish"),        "es-latin1",   "es" ],
- "fi" => [ __("Finnish"),        "fi-latin1",   "fi" ],
- "fr" => [ __("French"),         "fr-latin1",   "fr" ],
- "ge_ru"=>[__("Georgian (\"Russian\" layout)"),"ge_ru-georgian_academy","ge_ru"],
- "ge_la"=>[__("Georgian (\"Latin\" layout)"),"ge_la-georgian_academy","ge_la"],
- "gr" => [ __("Greek"),          "gr-8859_7",   "el" ],
- "hu" => [ __("Hungarian"),      "hu-latin2",   "hu" ],
- "hr" => [ __("Croatian"),	 "croat",	"hr" ],
- "il" => [ __("Israeli"),        "il-8859_8",   "il" ],
- "il_phonetic" => [ __("Israeli (Phonetic)"),"hebrew",   "il_phonetic" ],
- "ir" => [ __("Iranian"),        "ir-isiri3342","ir" ],
- "is" => [ __("Icelandic"),      "is-latin1",   "is" ],
- "it" => [ __("Italian"),        "it-latin1",   "it" ],
-#"iu" => [ __("Inuktitut"),      "iu",		"iu" ],
- "jp" => [ __("Japanese 106 keys"), "jp106",	"jp" ],
-#There is no XKB korean file yet; but using xmodmap one disables
-# some functioanlity; "us" used for XKB until this is fixed
- "kr" => [ __("Korean keyboard"),"us",	"us" ],
- "la" => [ __("Latin American"), "la-latin1",   "la" ],
- "lt" => [ __("Lithuanian AZERTY (old)"), "lt-latin7","lt_a" ],
-#- TODO: write a console kbd map for lt_new
- "lt_new" => [ __("Lithuanian AZERTY (new)"), "lt-latin7","lt_std" ],
- "lt_b" => [ __("Lithuanian \"number row\" QWERTY"), "ltb-latin7", "lt" ],
- "lt_p" => [ __("Lithuanian \"phonetic\" QWERTY"), "ltp-latin7", "lt_p" ],
- "lv" => [ __("Latvian"),	 "lv-latin7",   "lv" ],
- "mk" => [ __("Macedonian"),	 "mk",		"mk" ],
- "nl" => [ __("Dutch"),          "nl-latin1",   "nl" ],
- "no" => [ __("Norwegian"),      "no-latin1",   "no" ],
- "pl" => [ __("Polish (qwerty layout)"),        "pl", "pl" ],
- "pl2" => [ __("Polish (qwertz layout)"),       "pl-latin2", "pl2" ],
- "pt" => [ __("Portuguese"),     "pt-latin1",   "pt" ],
- "qc" => [ __("Canadian (Quebec)"), "qc-latin1","ca_enhanced" ],
-#- TODO: write a console kbd map for ro2
- "ro2" => [ __("Romanian (qwertz)"),       "ro2",         "ro2" ],
- "ro" => [ __("Romanian (qwerty)"),       "ro",         "ro" ],
- "ru" => [ __("Russian"),        "ru4",         "ru(winkeys)" ],
- "ru_yawerty" => [ __("Russian (Yawerty)"),"ru-yawerty","ru_yawerty" ],
- "se" => [ __("Swedish"),        "se-latin1",   "se" ],
- "si" => [ __("Slovenian"),      "slovene",     "si" ],
-# "sk" => [ __("Slovakian (QWERTZ)"), "sk-qwertz",   "czsk(sk_us_qwertz)" ],
-# "sk_qwerty" => [ __("Slovakian (QWERTY)"), "sk-qwerty", "czsk(sk_us_qwerty)" ],
-# "sk_prog" => [ __("Slovakian (Programmers)"), "sk-prog", "czsk(us_sk_prog" ],
- "sk" => [ __("Slovakian (QWERTZ)"), "sk-qwertz",   "sk" ],
- "sk_qwerty" => [ __("Slovakian (QWERTY)"), "sk-qwerty", "sk_qwerty" ],
-# TODO: console map
- "sr" => [ __("Serbian (cyrillic)"), "yu", "sr" ],
- "th" => [ __("Thai keyboard"),  "th",          "th" ],
-# TODO: console map
- "tj" => [ __("Tajik keyboard"),  "tj",          "tj" ],
- "tr_f" => [ __("Turkish (traditional \"F\" model)"), "trf", "tr_f" ],
- "tr_q" => [ __("Turkish (modern \"Q\" model)"), "tr_q-latin5", "tr" ],
- "ua" => [ __("Ukrainian"),      "ua",           "ua" ],
- "uk" => [ __("UK keyboard"),    "uk",           "gb" ],
- "us" => [ __("US keyboard"),    "us",           "us" ],
- "us_intl" => [ __("US keyboard (international)"), "us-latin1", "us_intl" ],
- "vn" => [ __("Vietnamese \"numeric row\" QWERTY"),"vn-tcvn", "vn(toggle)" ], 
- "yu" => [ __("Yugoslavian (latin)"), "yu", "hr" ],
-),
-);
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub keyboards { keys %keyboards }
-sub keyboard2text { $keyboards{$_[0]} && $keyboards{$_[0]}[0] }
-sub keyboard2kmap { $keyboards{$_[0]} && $keyboards{$_[0]}[1] }
-sub keyboard2xkb  { $keyboards{$_[0]} && $keyboards{$_[0]}[2] }
-
-sub loadkeys_files {
-    my ($warn) = @_;
-    my $archkbd = arch() =~ /^sparc/ ? "sun" : arch() =~ /i.86/ ? "i386" : arch() =~ /ppc/ ? "mac" : arch();
-    my $p = "/usr/lib/kbd/keymaps/$archkbd";
-    my $post = ".kmap.gz";
-    my %trans = ("cz-latin2" => "cz-lat2");
-    my %find_file;
-    foreach my $dir (all($p)) {
-	$find_file{$dir} = '';
-	foreach (all("$p/$dir")) {
-	    $find_file{$_} && $warn and warn "file $_ is both in $find_file{$_} and $dir\n";
-	    $find_file{$_} = "$p/$dir/$_";
-	}
-    }
-    my (@l, %l);
-    foreach (values %keyboards) {
-	local $_ = $trans{$_->[1]} || $_->[1];
-	my $l = $find_file{"$_$post"} || $find_file{first(/(..)/) . $post};
-	print STDERR "unknown $_\n" if $warn && !$l; $l or next;
-	push @l, $l;
-	foreach (`zgrep include $l | grep "^include"`) {
-	    /include\s+"(.*)"/ or die "bad line $_";
-	    @l{grep { -e $_ } ("$p/$1.inc.gz")} = ();
-	}
-    }
-    @l, keys %l, grep { -e $_ } map { "$p/$_.inc.gz" } qw(compose euro windowkeys linux-keys-bare);
-}
-
-sub unpack_keyboards {
-    my ($k) = @_ or return;
-    [ grep { 
-	my $b = $keyboards{$_->[0]};
-	$b or log::l("bad keyboard $_->[0] in %keyboard::lang2keyboard");
-	$b;
-    } map { [ split ':' ] } split ' ', $k ];
-}
-sub lang2keyboards {
-    my ($l) = @_;
-    my $li = unpack_keyboards($lang2keyboard{substr($l, 0, 5)}) || [ $keyboards{$l} && $l || "us" ];
-    $li->[0][1] ||= 100;
-    $li;
-}
-sub lang2keyboard {
-    my ($l) = @_;
-    my $kb = lang2keyboards($l)->[0][0];
-    $keyboards{$kb} ? $kb : "us"; #- handle incorrect keyboad mapping to us.
-}
-
-sub load {
-    my ($keymap) = @_;
-    return if $::testing;
-
-    my ($magic, @keymaps) = unpack "I i" . c::MAX_NR_KEYMAPS() . "a*", $keymap;
-    $keymap = pop @keymaps;
-
-    $magic != $KMAP_MAGIC and die "failed to read kmap magic";
-
-    local *F;
-    sysopen F, "/dev/console", 2 or die "failed to open /dev/console: $!";
-
-    my $count = 0;
-    foreach (0 .. c::MAX_NR_KEYMAPS() - 1) {
-	$keymaps[$_] or next;
-
-	my @keymap = unpack "s" . c::NR_KEYS() . "a*", $keymap;
-	$keymap = pop @keymap;
-
-	my $key = -1;
-	foreach my $value (@keymap) {
-	    $key++;
-	    c::KTYP($value) != c::KT_SPEC() or next;
-	    ioctl(F, c::KDSKBENT(), pack("CCS", $_, $key, $value)) or die "keymap ioctl failed ($_ $key $value): $!";
-	 }
-	$count++;
-    }
-    #- log::l("loaded $count keymap tables");
-}
-
-sub xmodmap_file {
-    my ($keyboard) = @_;
-    my $f = "$ENV{SHARE_PATH}/xmodmap/xmodmap.$keyboard";
-    if (! -e $f) {
-	eval {
-	    require packdrake;
-	    my $packer = new packdrake("$ENV{SHARE_PATH}/xmodmap.cz2", quiet => 1);
-	    $packer->extract_archive("/tmp", "xmodmap.$keyboard");
-	};
-	$f = "/tmp/xmodmap.$keyboard";
-    }
-    -e $f && $f;
-}
-
-sub setup {
-    return if arch() =~ /^sparc/;
-
-    #- Xpmac doesn't map keys quite right
-    if (arch() =~ /ppc/ && !$::testing && $ENV{DISPLAY}) {
-	log::l("Fixing Mac keyboard");
-	run_program::run('xmodmap', "-e",  "keycode 59 = BackSpace" );
-	run_program::run('xmodmap', "-e",  "keycode 131 = Shift_R" );
-	run_program::run('xmodmap', "-e",  "add shift = Shift_R" );
-	return;
-    }
-
-    my ($keyboard) = @_;
-    my $o = $keyboards{$keyboard} or return;
-
-    log::l("loading keymap $o->[1]");
-    if (-e (my $f = "$ENV{SHARE_PATH}/keymaps/$o->[1].bkmap")) {
-	load(scalar cat_($f));
-    } else {
-	local *F;
-	if (my $pid = open F, "-|") {
-	    local $/ = undef;
-	    eval { load(join('', <F>)) };
-	    waitpid $pid, 0;
-	} else {
-	    eval {
-		require packdrake;
-		my $packer = new packdrake("$ENV{SHARE_PATH}/keymaps.cz2", quiet => 1);
-		$packer->extract_archive(undef, "$o->[1].bkmap");
-	    };
-	    c::_exit(0);
-	}
-    }
-    my $f = xmodmap_file($keyboard);
-    eval { run_program::run('xmodmap', $f) } if $f && !$::testing && $ENV{DISPLAY};
-}
-
-sub write {
-    my ($prefix, $keyboard, $charset, $isNotDelete) = @_;
-
-    my $config = read_raw($prefix);
-    put_in_hash($config, {
-			  KEYTABLE => keyboard2kmap($keyboard), 
-			  KBCHARSET => $charset,
-			 });
-    add2hash_($config, {
-			DISABLE_WINDOWS_KEY => bool2yesno(detect_devices::isLaptop()),
-			BACKSPACE => $isNotDelete ? "BackSpace" : "Delete",
-		       });
-    setVarsInSh("$prefix/etc/sysconfig/keyboard", $config);
-    run_program::rooted($prefix, "dumpkeys > /etc/sysconfig/console/default.kmap") or log::l("dumpkeys failed");
-    if (arch() =~ /ppc/) {
-	my $s = "dev.mac_hid.keyboard_sends_linux_keycodes = 1";
-	substInFile { 
-            $_ = '' if /^\Qdev.mac_hid.keyboard_sends_linux_keycodes/;
-            $_ .= $s if eof;
-        } "$prefix/etc/sysctl.conf";
-    }
-}
-
-sub read_raw {
-    my ($prefix) = @_;
-    my %config = getVarsFromSh("$prefix/etc/sysconfig/keyboard");
-    \%config;
-}
-
-sub read {
-    my ($prefix) = @_;
-    my $keytable = read_raw($prefix)->{KEYTABLE};
-    keyboard2kmap($_) eq $keytable and return $_ foreach keys %keyboards;
-    $keyboards{$keytable} && $keytable; #- keep track of unknown keyboard.
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/lang.pm b/perl-install/lang.pm
deleted file mode 100644
index 80ec77201..000000000
--- a/perl-install/lang.pm
+++ /dev/null
@@ -1,558 +0,0 @@
-package lang; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use log;
-
-#-######################################################################################
-#- Globals
-#-######################################################################################
-#- key (to be used in $LC_ALL), [0] = english name, [1] = charset encoding,
-#- [2] = value for $LANG, [3] = value for LANGUAGE (a list of possible
-#- languages, carefully choosen)
-#-
-#- when adding a new language here, also add a line in kleyboards list
-
-#
-# NOTE: we cheat for UTF-8 locales, in DrakX they are the 8bit ones;
-# it's easier like that now. Of course, on the installed system a real
-# UTF-8 locale will be used
-#
-
-my %languages = (
-'en_US' => [ 'English|United States',	'iso-8859-1', 'en', 'en_US:en' ],
-'en_GB' => [ 'English|United Kingdom',	'iso-8859-1', 'en', 'en_GB:en' ],
-'en_IE@euro' => [ 'English|Ireland (euro)','iso-8859-15', 'en', 'en_IE:en_GB:en' ],
-  'af'  => [ 'Afrikaans',		'iso-8859-1', 'af', 'af:en_ZA' ],
-  'ar'  => [ 'Arabic',			'iso-8859-6', 'ar', 'ar' ],
-'az_AZ.UTF-8'=> [ 'Azeri (Latin)',	'iso-8859-9e','az', 'az:tr' ],
-  'be'  => [ 'Belarussian',		 'cp1251',    'be', 'be:be_BY.CP1251:ru_RU.CP1251' ],
-#'be_BY.UTF-8'  => [ 'Belarussian|UTF-8', 'cp1251',    'be', 'be:be_BY.CP1251:ru_RU.CP1251' ],
-#- provide aliases for some not very standard names used in po files...
-  'bg'  => [ 'Bulgarian',		'cp1251',     'bg', 'bg:bg.CP1251:bg_BG.CP1251:bg_BG' ],
-  'br'  => [ 'Brezhoneg',		'iso-8859-1', 'br', 'br:fr_FR:fr' ],
-  'bs'  => [ 'Bosnian',			'iso-8859-2', 'bs', 'bs:hr:sr' ],
-'ca_ES@euro'=> [ 'Catalan','iso-8859-15','ca', 'ca:es_ES:es:fr_FR:fr' ],
-  'cs'  => [ 'Czech',			'iso-8859-2', 'cs', 'cs' ],
-  'cy'  => [ 'Cymraeg (Welsh)',		'iso-8859-14','cy', 'cy:en_GB:en' ],
-  'da'  => [ 'Danish',				'iso-8859-1', 'da', 'da' ],		
-'de_AT@euro' => [ 'German|Austria','iso-8859-15','de', 'de_AT:de' ],		
-'de_BE@euro' => [ 'German|Belgium',		'iso-8859-15', 'de', 'de_BE:de' ],
-'de_CH' => [ 'German|Switzerland',	'iso-8859-1', 'de', 'de_CH:de' ],
-'de_DE@euro' => [ 'German|Germany',		'iso-8859-15', 'de', 'de_DE:de' ],
-  'el'  => [ 'Greek',                   'iso-8859-7', 'el', 'el' ],
-  'eo'  => [ 'Esperanto',		'iso-8859-3', 'eo', 'eo' ],
-'es_AR' => [ 'Spanish|Argentina',	'iso-8859-1', 'es', 'es_AR:es_UY:es:es_ES' ],
-'es_ES@euro' => [ 'Spanish|Spain (modern sorting)',	'iso-8859-15', 'es', 'es_ES:es' ],
-'es@tradicional' => [ 'Spanish|Spain (traditional sorting)', 'iso-8859-1', 'es', 'es' ],
-'es_MX' => [ 'Spanish|Mexico',	'iso-8859-1', 'es', 'es_MX:es:es_ES' ],
-  'et'  => [ 'Estonian',		'iso-8859-15','et', 'et' ],
-'eu_ES@euro'=> [ 'Euskara (Basque)',	'iso-8859-15', 'eu', 'eu:es_ES:fr_FR:es:fr' ],
-#-'fa'  => [ 'Farsi (Iranian)',		'isiri-3342', 'fa', 'fa' ],
-'fi_FI@euro'=> [ 'Finnish (Suomi)',	'iso-8859-15','fi', 'fi' ],
-#-'fo'  => [ 'Faroese',			'iso-8859-1', 'fo', 'fo' ],
-'fr_BE@euro'=> [ 'French|Belgium',	'iso-8859-15','fr', 'fr_BE:fr' ],
-'fr_CA' => [ 'French|Canada',		'iso-8859-15','fr', 'fr_CA:fr' ],
-'fr_CH' => [ 'French|Switzerland',	'iso-8859-1', 'fr', 'fr_CH:fr' ],
-'fr_FR@euro'=> [ 'French|France',	'iso-8859-15','fr', 'fr_FR:fr' ],
-'ga_IE@euro'=> [ 'Gaeilge (Irish)',	'iso-8859-15','ga', 'ga:en_IE:en' ],
-#-'gd'  => [ 'Scottish gaelic',		'iso-8859-14','gd', 'gd:en_GB:en' ],
-'gl_ES@euro'=> [ 'Galego (Galician)',	'iso-8859-15','gl', 'gl:es_ES:pt_PT:pt_BR:es:pt' ],
-#-'gv'	=> [ 'Manx gaelic',		'iso-8859-14','gv', 'gv:en_GB:en' ],
-#- 'iw' was the old code for hebrew language
-  'he'  => [ 'Hebrew',			'iso-8859-8', 'he', 'he:iw_IL' ],
-  'hr'  => [ 'Croatian',		'iso-8859-2', 'hr', 'hr' ],
-  'hu'  => [ 'Hungarian', 		'iso-8859-2', 'hu', 'hu' ],
-  'hy'  => [ 'Armenian',                'armscii-8',  'hy', 'hy' ],
-#- 'in' was the old code for indonesian language; by putting LANGUAGE=id:in_ID
-#- we catch the few catalog files still using the wrong code
-  'id'  => [ 'Indonesian',		'iso-8859-1', 'id', 'id:in_ID' ],
-  'is'  => [ 'Icelandic', 		'iso-8859-1', 'is', 'is' ],
-'it_CH' => [ 'Italian|Switzerland',	'iso-8859-1', 'it', 'it_IT:it' ],
-'it_IT@euro'=> [ 'Italian|Italy','iso-8859-15','it', 'it_IT:it' ],
-#-'iu'  => [ 'Inuktitut', 		'unicodeIU',  'iu', 'iu' ],
-  'ja'  => [ 'Japanese',		'jisx0208',   'ja', 'ja_JP.ujis:ja' ],
-'ka_GE.UTF-8'=> [ 'Georgian',   'georgian-ps','ka', 'ka' ],
-#-'kl'  => [ 'Greenlandic (inuit)',	'iso-8859-1', 'kl', 'kl' ],
-  'ko'  => [ 'Korean',                  'ksc5601',    'ko', 'ko' ],
-#-'kw'	=> [ 'Cornish gaelic',		'iso-8859-14','kw', 'kw:en_GB:en' ],
-#-'lo'  => [ 'Laotian',			'mulelao-1',  'lo', 'lo' ],
-  'lt'  => [ 'Lithuanian',		'iso-8859-13','lt', 'lt' ],
-  'lv'  => [ 'Latvian',			'iso-8859-13','lv', 'lv' ],   
-  'mi'	=> [ 'Maori',			'iso-8859-13','mi', 'mi' ],
-  'mk'  => [ 'Macedonian (Cyrillic)',	'iso-8859-5', 'mk', 'mk' ],
-#-'ms'  => [ 'Malay',			'iso-8859-1', 'ms', 'ms' ],
-  'mt'  => [ 'Maltese',			'iso-8859-3', 'mt', 'mt' ],
-'nl_BE@euro'=> [ 'Dutch|Belgium',	'iso-8859-15', 'nl', 'nl_BE:nl' ],
-'nl_NL@euro'=> [ 'Dutch|Netherlands','iso-8859-15', 'nl', 'nl_NL:nl' ],
-# 'nb' is the new locale name in glibc 2.2
-  'no'  => [ 'Norwegian|Bokmaal',	'iso-8859-1', 'no', 'no:nb:nn:no@nynorsk:no_NY' ],
-# no_NY is used by KDE (but not standard); 'nn' is the new locale in glibc 2.2
-  'nn'	=> [ 'Norwegian|Nynorsk',	'iso-8859-1', 'no', 'nn:no@nynorsk:no_NY:no:nb' ],
-#-'oc'  => [ 'Occitan',			'iso-8859-1', 'oc', 'oc:fr_FR' ],
-#-'pd'	=> [ 'Plauttdietsch',		'iso-8859-1', 'pd', 'pd' ],
-#-'ph'  => [ 'Pilipino',		'iso-8859-1', 'ph', 'ph:tl' ],
-  'pl'  => [ 'Polish',			'iso-8859-2', 'pl', 'pl' ],
-#-'pp'	=> [ 'Papiamento',		'iso-8859-1', 'pp', 'pp' ],
-'pt_BR' => [ 'Portuguese|Brazil',	'iso-8859-1', 'pt_BR', 'pt_BR:pt_PT:pt' ],
-'pt_PT@euro'=> [ 'Portuguese|Portugal','iso-8859-15','pt', 'pt_PT:pt:pt_BR' ],
-  'ro'  => [ 'Romanian',  		'iso-8859-2', 'ro', 'ro' ],
-'ru_RU.KOI8-R' => [ 'Russian|KOI8-R',	'koi8-r',     'ru', 'ru_RU:ru' ],
-'ru_RU.CP1251' => [ 'Russian|CP1251',	'cp1251',     'ru', 'ru_RU:ru' ],
-#'ru_RU.UTF-8' => [ 'Russian|UTF-8',	'cp1251',     'ru', 'ru_RU:ru' ],
-  'sk'  => [ 'Slovak',    		'iso-8859-2', 'sk', 'sk' ],
-  'sl'  => [ 'Slovenian',		'iso-8859-2', 'sl', 'sl' ],
-  'sp'  => [ 'Serbian|Cyrillic',	'iso-8859-5', 'sp', 'sp:sr' ],
-  'sr'  => [ 'Serbian|Latin',		'iso-8859-2', 'sr', 'sr' ],
-  'sv'  => [ 'Swedish',			'iso-8859-1', 'sv', 'sv' ],
-#-'ta'	=> [ 'Tamil',			'tscii-0',    'ta', 'ta' ],
-'tg_TJ.UTF-8'=> [ 'Tajik',		'koi8-k',     'tg', 'tg' ],
-  'th'  => [ 'Thai',                    'tis620',     'th', 'th' ],
-  'tr'  => [ 'Turkish',	 		'iso-8859-9', 'tr', 'tr' ],
-#-'tt_RU.UTF-8'=> [ 'Tatar',		'koi8-k',  'tg', 'tg' ],
-#-'ur'	=> [ 'Urdu',			'cp1256',     'ur', 'ur' ],  
-'uk_UA' => [ 'Ukrainian', 		'koi8-u',     'uk', 'uk_UA:uk' ],
-  'uz'  => [ 'Uzbek',			'iso-8859-1', 'uz', 'uz' ],
-'vi_VN.TCVN'  => [ 'Vietnamese|TCVN',   'tcvn',     'vi', 'vi' ],
-'vi_VN.VISCII' => [ 'Vietnamese|VISCII','viscii',   'vi', 'vi' ],
-#'vi_VN.UTF-8' => [ 'Vietnamese|UTF-8','tcvn',   'vi', 'vi' ],
-  'wa'  => [ 'Walon',     		'iso-8859-1', 'wa', 'wa:fr_BE:fr' ],
-#-'yi'	=> [ 'Yiddish',			'cp1255',     'yi', 'yi' ],
-# NOTE: 'zh' must be in the LANGUAGE list, it is not used for translations
-# themselves but is needed for our selection of locales-xx packages
-# and the language dependent packages resolution
-#'zh_HK.Big5' => [ 'Chinese|Traditional|Hong Kong|Big5', 'Big5', 'zh_TW.Big5', 'zh_TW.Big5:zh_TW.big5:zh_TW:zh_HK:zh' ],
-#'zh_HK.UTF-8' => [ 'Chinese|Traditional|Hong Kong|UTF-8','unicodeTW','zh_HK', 'zh_HK:zh_TW.Big5:zh_TW.big5:zh_TW:zh_CN.GB2312:zh_CN:zh' ],
-'zh_TW.Big5' => [ 'Chinese|Traditional', 'Big5', 'zh_TW.Big5', 'zh_TW.Big5:zh_TW.big5:zh_TW:zh_HK:zh' ],
-#'zh_TW.UTF-8' => [ 'Chinese|Traditional|Taiwan|UTF-8','unicodeTW','zh_TW', 'zh_TW.Big5:zh_TW.big5:zh_TW:zh_HK:zh_CN.GB2312:zh_CN:zh' ],
-'zh_CN.GB2312' => [ 'Chinese|Simplified', 'gb2312', 'zh_CN.GB2312', 'zh_CN.GB2312:zh_CN.gb2312:zh_CN:zh' ],
-#'zh_TW.UTF-8' => [ 'Chinese|Simplified|UTF-8','unicodeCN','zh_CN', 'zh_CN.GB2312:zh_CN.gb2312:zh_CN:zh:zh_TW.Big5:zh_TW.big5:zh_TW:zh_HK' ],
-);
-
-my %xim = (
-  'zh_TW.Big5' => { 
-	ENC => 'big5',
-	XIM => 'xcin',
-	XIM_PROGRAM => 'xcin',
-	XMODIFIERS => '"@im=xcin"',
-	CONSOLE_NOT_LOCALIZED => 'yes',
-  },
-  'zh_CN.GB2312' => {
-	ENC => 'gb',
-	XIM => 'Chinput',
-	XIM_PROGRAM => 'chinput',
-	XMODIFIERS => '"@im=Chinput"',
-	CONSOLE_NOT_LOCALIZED => 'yes',
-  },
-  'ko' => {
-	ENC => 'kr',
-	XIM => 'Ami',
-	# NOTE: there are several possible versions of ami, for the different
-	# desktops (kde, gnome, etc). So XIM_PROGRAM isn't defined; it will
-	# be the xinitrc script, XIM section, that will choose the right one 
-	# XIM_PROGRAM => 'ami',
-	XMODIFIERS => '"@im=Ami"',
-	CONSOLE_NOT_LOCALIZED => 'yes',
-  },
-  'ja' => {
-	ENC => 'eucj',
-	XIM => 'kinput2',
-	XIM_PROGRAM => 'kinput2',
-	XMODIFIERS => '"@im=kinput2"',
-  },
-  # XFree86 has an internal XIM for Thai that enables syntax checking etc.
-  # 'Passthroug' is no check at all, 'BasicCheck' accepts bad sequences
-  # and convert them to right ones, 'Strict' refuses bad sequences
-  'th' => {
-	XIM_PROGRAM => '/bin/true', # it's an internal module
-	XMODIFIERS => '"@im=BasicCheck"',
-  },
-  # xvnkb is not an XIM input method; but an input method of another
-  # kind, only XIM_PROGRAM needs to be defined
-  'vi' => {
-	XIM_PROGRAM => 'xvnkb',
-  },
-  'vi_VN.TCVN' => {
-	XIM_PROGRAM => 'xvnkb',
-  },
-  'vi_VN.VISCII' => {
-	XIM_PROGRAM => 'xvnkb',
-  },
-  'vi_VN.UTF-8' => {
-	XIM_PROGRAM => 'xvnkb',
-  },
-  # right to left languages only work properly on console
-  'ar' => {
-	X11_NOT_LOCALIZED => "yes",
-  },
-  'fa' => {
-	X11_NOT_LOCALIZED => "yes",
-  },
-# KDE has some "mirrored" translations
-#  'he' => {
-#	X11_NOT_LOCALIZED => "yes",
-#  },
-  'ur' => {
-	X11_NOT_LOCALIZED => "yes",
-  },
-  'yi' => {
-	X11_NOT_LOCALIZED => "yes",
-  },
-);
-
-sub std2 { "-*-*-medium-r-normal-*-$_[1]-*-*-*-*-*-$_[0]" }
-sub std_ { std2($_[0], 10), std2($_[0], 10) }
-sub std  { std2($_[0], $_[1] || 10), std2($_[0],  8) }
-
-#- [0]: console font name; [1]: unicode map for console font
-#- [2]: acm file for console font;
-#- [3]: iocharset param for mount; [4]: codepage parameter for mount
-#- [5]: X11 fontset
-my %charsets = (
-  "armscii-8"  => [ "arm8",		"armscii8.uni",	"trivial.trans",
-    undef,	undef, std_("armscii-8") ],
-#- chinese needs special console driver for text mode
-  "Big5"       => [ undef,		undef,		undef,
-	"big5", "950", "-*-*-*-*-*-*-*-*-*-*-*-*-big5-0" ],
-  "gb2312"     => [ undef,		undef,		undef,
-	"gb2312", "936", "-*-*-*-*-*-*-*-*-*-*-*-*-gb2312.1980-0" ],
-  "georgian-academy" => [ "t_geors", "geors.uni",	"trivial.trans",
-	undef,  undef, "-*-*-*-*-*-*-*-*-*-*-*-*-georgian-academy" ],
-  "georgian-ps" => [ "t_geors",		"geors.uni",	"geors_to_geops.trans",
-	undef,  undef, "-*-*-*-*-*-*-*-*-*-*-*-*-georgian-academy" ],
-  "iso-8859-1" => [ "lat0-sun16",	undef,		"iso15",
-	"iso8859-1", "850", sub { std("iso8859-1", @_) } ],
-  "iso-8859-2" => [ "lat2-sun16",	undef,		"iso02",
-	"iso8859-2", "852", sub { std("iso8859-2", @_) } ],
-  "iso-8859-3" => [ "iso03.f16",	undef,		"iso03",
-	"iso8859-3", undef, std_("iso8859-3") ],
-  "iso-8859-4" => [ "lat4u-16",		undef,		"iso04",
-	"iso8859-4", "775", std_("iso8859-4") ],
-  "iso-8859-5" => [ "iso05.f16",	"iso05",	"trivial.trans",
-  	"iso8859-5", "855", sub { std("microsoft-cp1251", @_) } ],
-#-#- arabic needs special console driver for text mode [acon]
-#-#- (and gtk support isn't done yet)
-  "iso-8859-6" => [ "iso06.f16",	"iso06",	"trivial.trans",
-    "iso8859-6", "864", std_("iso8859-6") ],
-  "iso-8859-7" => [ "iso07.f16",	"iso07",	"trivial.trans",
-	"iso8859-7", "869", std_("iso8859-7") ],
-#-#- hebrew needs special console driver for text mode [acon]
-#-#- (and gtk support isn't done yet)
-   "iso-8859-8" => [ "iso08.f16",	"iso08",	"trivial.trans",
-#	std_("iso8859-8") ],
-	"iso8859-8", "862", std_("microsoft-cp1255") ],
-  "iso-8859-9" => [ "iso09.f16",	"iso09",	"trivial.trans",
-	"iso8859-9", "857", sub { std("iso8859-9", @_) } ],
-  "iso-8859-13" => [ "tlat7",		"iso13",	"trivial.trans",
-	"iso8859-13", "775", std_("iso8859-13") ],
-  "iso-8859-14" => [ "tlat8",		"iso14",	"trivial.trans",
-	"iso8859-14", "850", std_("iso8859-14") ],
-  "iso-8859-15" => [ "lat0-sun16",	undef,		"iso15",
-	"iso8859-15", "850", sub { std("iso8859-15", @_) } ],
-  "iso-8859-9e" => [ "tiso09e",		"iso09",	"trivial.trans",
-	"iso8859-9", "857", std2("iso8859-9e",10) ],
-#- japanese needs special console driver for text mode [kon2]
-  "jisx0208"   => [ undef,		undef,		"trivial.trans",
-	"euc-jp", "932", "-*-*-*-*-*-*-*-*-*-*-*-*-jisx*.*-0" ],
-  "koi8-r"     => [ "UniCyr_8x16",	undef,		"koi8-r",
-	"koi8-r", "866", sub { std("microsoft-cp1251", @_) } ],
-  "koi8-u"     => [ "UniCyr_8x16",	undef,		"koi8-u",
-	"koi8-u", "866", sub { std("microsoft-cp1251", @_) } ],
-  "koi8-k"     => [ "koi8-k",		"iso01",	"trivial.trans",
-	undef, undef, std("koi8-k") ],
-  "tatar-cyr"  => [ "tatar-cyr",	undef,		"cp1251",
-	undef, undef, std("tatar-cyr") ],
-  "cp1251"     => [ "UniCyr_8x16",	undef,		"cp1251",
-	"cp1251", "866", sub { std("microsoft-cp1251", @_) } ],
-#- Yiddish needs special console driver for text mode [acon]
-#- (and gtk support isn't done yet)
-  "cp1255"     => [ "iso08.f16",        "iso08",        "trivial.trans",
-	"cp1255", "862", std_("microsoft-cp1255") ],
-#- Urdu needs special console driver for text mode [acon]
-#- (and gtk support isn't done yet)
-  "cp1256"     => [ undef,              undef,          "trivial.trans",
-	undef, "864", std_("microsoft-cp1255") ],
-#- korean needs special console driver for text mode
-  "ksc5601"    => [ undef,		undef,		undef,
-	"euc-kr", "949", "-*-*-*-*-*-*-*-*-*-*-*-*-ksc5601.1987-*" ],
-#- I have no console font for Thai...
-  "tis620"     => [ undef,		undef,		"trivial.trans",
-	"tis-620", "874", std2("tis620.2533-1",12) ],
-  "tcvn"       => [ "tcvn8x16",		"tcvn",		"trivial.trans",
-	undef, undef, std2("tcvn-5712", 13), std2("tcvn-5712", 10) ],
-  "viscii"     => [ "viscii10-8x16",	"viscii.uni",	"viscii1.0_to_viscii1.1.trans",
-#-	"-*-*-*-*-*-*-*-*-*-*-*-*-viscii1.1-1" ],
-	undef, undef, std2("tcvn-5712", 13), std2("tcvn-5712", 10) ],
-#- Farsi (iranian) needs special console driver for text mode [acon]
-#- (and gtk support isn't done yet)
-  "isiri-3342" => [ undef,		undef,		"trivial.trans",
-	undef, undef, "-*-*-*-*-*-*-*-*-*-*-*-*-isiri-3342" ],
-  "tscii-0" => [ "tamil",		undef,		"trivial.trans",
-	undef, undef, "-*-*-*-*-*-*-*-*-*-*-*-*-tscii-0" ],
-  "unicode" => [ undef,			undef,		"trivial.trans",
-	"utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-iso10646-1" ],
-);
-
-my %bigfonts = (
-    Big5     => 'taipei16.pcf.gz',
-    gb2312   => 'gb16fs.pcf.gz',
-    jisx0208 => 'k14.pcf.gz',
-    ksc5601  => 'baekmuk_gulim_h_14.pcf.gz',
-    unicode  => 'cu12.pcf.gz',
-);
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-
-sub list { keys %languages }
-sub lang2text     { exists $languages{$_[0]} && $languages{$_[0]}[0] }
-sub lang2charset  { exists $languages{$_[0]} && $languages{$_[0]}[1] }
-sub lang2LANG     { exists $languages{$_[0]} && $languages{$_[0]}[2] }
-sub lang2LANGUAGE { exists $languages{$_[0]} && $languages{$_[0]}[3] }
-sub getxim { $xim{$_[0]} }
-
-sub set { 
-    my ($lang) = @_;
-
-    if ($lang && !exists $languages{$lang}) {
-	#- try to find the best lang
-	my ($lang2) = grep { /^\Q$lang/ } list(); #- $lang is not precise enough, choose the first complete
-	my ($lang3) = grep { $lang =~ /^\Q$_/ } list(); #- $lang is too precise, choose the first substring matching
-	log::l("lang::set: fixing $lang with ", $lang2 || $lang3);
-	$lang = $lang2 || $lang3;
-    }
-
-    if ($lang && exists $languages{$lang}) {
-	#- use "packdrake -x" that follow symlinks and expand directory.
-	#- it is necessary as there is a lot of symlinks inside locale.cz2,
-	#- using a compressed cpio archive is nighmare to extract all files.
-	#- reset locale environment variable to avoid any warnings by perl,
-	#- so installation of new locale is done with empty locale ...
-	if (!-e "$ENV{SHARE_PATH}/locale/$lang" && common::usingRamdisk()) {
-	    @ENV{qw(LANG LC_ALL LANGUAGE LINGUAS)} = ();
-
-	    eval { rm_rf("$ENV{SHARE_PATH}/locale") };
-	    eval {
-		require packdrake;
-		my $packer = new packdrake("$ENV{SHARE_PATH}/locale.cz2", quiet => 1);
-		$packer->extract_archive("$ENV{SHARE_PATH}/locale", lang2LANG($lang));
-	    };
-	}
-
-#- set all LC_* variables to a unique locale ("C"), and only redefine
-#- LC_CTYPE (for X11 choosing the fontset) and LANGUAGE (for the po files)
-	$ENV{LC_NUMERIC}		= "C";
-	$ENV{LC_TIME}			= "C";
-	$ENV{LC_COLLATE}		= "C";
-	$ENV{LC_MONETARY}		= "C";
-	$ENV{LC_PAPER}			= "C";
-	$ENV{LC_NAME}			= "C";
-	$ENV{LC_ADDRESS}		= "C";
-	$ENV{LC_TELEPHONE}		= "C";
-	$ENV{LC_MEASUREMENT}	= "C";
-	$ENV{LC_IDENTIFICATION}	= "C";
-
-	$ENV{LC_CTYPE}  = lang2LANG($lang);
-	$ENV{LC_MESSAGES} = lang2LANG($lang);
-	$ENV{LANG}      = lang2LANG($lang);
-	$ENV{LANGUAGE}  = lang2LANGUAGE($lang);
-
-	load_mo();
-    } else {
-	# stick with the default (English) */
-	delete $ENV{LANG};
-	delete $ENV{LC_ALL};
-	delete $ENV{LANGUAGE};
-	delete $ENV{LINGUAS};
-    }
-    $lang;
-}
-
-sub langs {
-    my ($l) = @_;
-    grep { $l->{$_} } keys %$l;
-}
-
-sub langsLANGUAGE {
-    my ($l) = @_;
-    my @l = $l->{all} ? list() : langs($l);
-    uniq(map { split ':', lang2LANGUAGE($_) } @l);
-}
-
-sub pack_langs { 
-    my ($l) = @_; 
-    my $s = $l->{all} ? 'all' : join ':', uniq(map { lang2LANGUAGE($_) } langs($l));
-    $ENV{RPM_INSTALL_LANG} = $s;
-    $s;
-}
-
-sub unpack_langs {
-    my ($s) = @_;
-    my @l = uniq(map { split ':', lang2LANGUAGE($_) } split(':', $s));
-    my @l2 = intersection(\@l, [ keys %languages ]);
-    +{ map { $_ => 1 } @l2 };
-}
-
-sub read {
-    my ($prefix) = @_;    
-    my %h = getVarsFromSh("$prefix/etc/sysconfig/i18n");
-    my $lang = $h{LC_MESSAGES} || 'en_US';
-    my $langs = 
-      cat_("$prefix/etc/rpm/macros") =~ /%_install_langs (.*)/ ? unpack_langs($1) : { $lang => 1 };
-    $lang, $langs;
-}
-
-sub write_langs {
-    my ($prefix, $langs) = @_;
-    my $s = pack_langs($langs);
-    symlink "$prefix/etc/rpm", "/etc/rpm" if $prefix;
-    substInFile { s/%_install_langs.*//; $_ .= "%_install_langs $s\n" if eof && $s } "$prefix/etc/rpm/macros";
-}
-
-sub write { 
-    my ($prefix, $lang) = @_;
-
-    $lang or return;
-
-    my $h = {};
-    $h->{$_} = $lang foreach qw(LC_COLLATE LC_CTYPE LC_MESSAGES LC_NUMERIC LC_MONETARY LC_TIME);
-    if ($lang && exists $languages{$lang}) {
-	add2hash $h, { LANG => lang2LANG($lang), LANGUAGE => lang2LANGUAGE($lang) };
-
-	my $c = $charsets{lang2charset($lang) || ''};
-	if ($c) {
-	    my $p = "$prefix/usr/lib/kbd";
-	    if ($c->[0]) {
-		add2hash $h, { SYSFONT => $c->[0] };
-		eval {
-		    cp_af("$p/consolefonts/$c->[0].psf.gz", "$prefix/etc/sysconfig/console/consolefonts");
-		};
-		$@ and log::l("missing console font $c->[0]");
-	    }
-	    if ($c->[1]) {
-		add2hash $h, { UNIMAP => $c->[1] };
-		eval {
-		    cp_af(glob_("$p/consoletrans/$c->[1]*"), "$prefix/etc/sysconfig/console/consoletrans");
-		};
-		$@ and log::l("missing console unimap file $c->[1]");
-	    }
-	    if ($c->[2]) {
-		add2hash $h, { SYSFONTACM => $c->[2] };
-		eval {
-		    cp_af(glob_("$p/consoletrans/$c->[2]*"), "$prefix/etc/sysconfig/console/consoletrans");
-		};
-		$@ and log::l("missing console acm file $c->[2]");
-	    }
-
-	}
-	add2hash $h, $xim{$lang};
-    }
-    setVarsInSh("$prefix/etc/sysconfig/i18n", $h);
-}
-
-sub load_mo {
-    my ($lang) = @_;
-    my ($localedir, $suffix) = ("$ENV{SHARE_PATH}/locale", 'LC_MESSAGES/libDrakX.mo');
-    $localedir .= "_special" if $::isInstall;
-
-    $lang ||= $ENV{LANGUAGE} || $ENV{LC_ALL} || $ENV{LC_MESSAGES} || $ENV{LANG};
-
-    c::setlocale();
-    c::bindtextdomain('libDrakX', $localedir);
-
-    foreach (split ':', $lang) {
-	my $f = "$localedir/$_/$suffix";
-	-s $f and return $_;
-
-	if ($::isInstall && common::usingRamdisk()) {
-	    # cleanup
-	    eval { rm_rf($localedir) };
-	    eval { mkdir_p(dirname("$localedir/$_/$suffix")) };
-	    install_any::getAndSaveFile ("$localedir/$_/$suffix");
-
-	    -s $f and return $_;
-	}
-    }
-    '';
-}
-
-
-
-sub console_font_files {
-    map { -e $_ ? $_ : "$_.gz" }
-      (map { "/usr/lib/kbd/consolefonts/$_.psf" } uniq grep {$_} map { $_->[0] } values %charsets),
-      (map { -e $_ ? $_ : "$_.sfm" } map { "/usr/lib/kbd/consoletrans/$_" } uniq grep {$_} map { $_->[1] } values %charsets),
-      (map { -e $_ ? $_ : "$_.acm" } map { "/usr/lib/kbd/consoletrans/$_" } uniq grep {$_} map { $_->[2] } values %charsets),
-}
-
-sub load_console_font {
-    my ($lang) = @_;
-    my ($f, $u, $m) = @{$charsets{lang2charset($lang)} || []};
-
-    require run_program;
-    run_program::run(if_($ENV{LD_LOADER}, $ENV{LD_LOADER}), 
-		     'consolechars', '-v', '-f', $f || 'lat0-sun16',
-		     if_($u, '-u', $u), if_($m, '-m', $m));
-}
-
-#-sub load_font {
-#-    my ($charset) = @_;
-#-    my $fontFile = "lat0-sun16";
-#-
-#-    if (my $c = $charsets{$charset}) {
-#-	   log::l("loading $charset font");
-#-	   $fontFile = $c->[0];
-#-    }
-#-
-#-    # text mode font
-#-    log::l("loading font $ENV{SHARE_PATH}/consolefonts/$fontFile");
-#-    #c::loadFont("/tmp/$fontFile") or log::l("error in loadFont: one of PIO_FONT PIO_UNIMAPCLR PIO_UNIMAP PIO_UNISCRNMAP failed: $!");
-#-    #print STDERR "\033(K";
-#-
-#-}
-
-sub get_x_fontset {
-    my ($lang, $size) = @_;
-
-    my $charset = lang2charset($lang) or return;
-    my $c = $charsets{$charset} or return;
-    if (my $f = $bigfonts{$charset}) {
-	my $dir = "/usr/X11R6/lib/X11/fonts";
-	if (! -e "$dir/$f" && $::isInstall && common::usingRamdisk()) {
-	    unlink "$dir/$_" foreach values %bigfonts;
-	    install_any::remove_bigseldom_used ();
-	    install_any::getAndSaveFile ("$dir/$f");
-	}
-    }
-    my ($big, $small) = @$c[5..6];
-    ($big, $small) = $big->($size) if ref $big;
-    ($big, $small);
-}
-
-sub fs_options {
-    my ($lang) = @_;
-    my $charset = lang2charset($lang) or return;
-    my $c = $charsets{$charset} or return;
-    my ($iocharset, $codepage) = @$c[3..4];
-    $iocharset, $codepage;
-}
-
-sub charset {
-    my ($lang, $prefix) = @_;
-    my $l = lang2LANG($lang);
-    foreach (cat_("$prefix/usr/X11R6/lib/X11/locale/locale.alias")) {
-	/$l:\s+.*\.(\S+)/ and return $1;
-    }
-    $l =~ /.*\.(\S+)/ and return $1;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/list.sparc b/perl-install/list.sparc
deleted file mode 100644
index 448e0b63e..000000000
--- a/perl-install/list.sparc
+++ /dev/null
@@ -1,74 +0,0 @@
-/bin/ash
-/bin/cpio
-/lib/libnss_nis.so.2
-/lib/libnss_files.so.2
-/lib/libnss_dns.so.2
-/lib/libresolv.so.2
-/etc/protocols
-/sbin/fdisk
-/sbin/ifport
-/sbin/insmod
-/sbin/mkraid
-/sbin/rmmod
-/sbin/mkdosfs
-/sbin/mke2fs
-/sbin/raidstart
-/usr/bin/bzip2
-/usr/bin/perl
-/usr/lib/libimlib-png.so
-/usr/lib/gtk/themes/engines/libpixmap.so
-/usr/lib/gtk/themes/engines/libpixmap.la
-/usr/lib/libimlib-png.so
-/usr/lib/perl5/5.00503/AutoLoader.pm
-/usr/lib/perl5/5.00503/Carp.pm
-/usr/lib/perl5/5.00503/Data/Dumper.pm
-/usr/lib/perl5/5.00503/Exporter.pm
-/usr/lib/perl5/5.00503/FileHandle.pm
-/usr/lib/perl5/5.00503/SelectSaver.pm
-/usr/lib/perl5/5.00503/SelfLoader.pm
-/usr/lib/perl5/5.00503/Symbol.pm
-/usr/lib/perl5/5.00503/Time/Local.pm
-/usr/lib/perl5/5.00503/dumpvar.pl
-/usr/lib/perl5/5.00503/sparc-linux/Config.pm
-/usr/lib/perl5/5.00503/sparc-linux/DynaLoader.pm
-/usr/lib/perl5/5.00503/sparc-linux/Fcntl.pm
-/usr/lib/perl5/5.00503/sparc-linux/auto/Fcntl/Fcntl.bs
-/usr/lib/perl5/5.00503/sparc-linux/auto/Fcntl/Fcntl.so
-/usr/lib/perl5/5.00503/sparc-linux/IO/File.pm
-/usr/lib/perl5/5.00503/sparc-linux/IO/Handle.pm
-/usr/lib/perl5/5.00503/sparc-linux/IO/Seekable.pm
-/usr/lib/perl5/5.00503/sparc-linux/IO/Socket.pm
-/usr/lib/perl5/5.00503/sparc-linux/Socket.pm
-/usr/lib/perl5/5.00503/sparc-linux/_h2ph_pre.ph
-/usr/lib/perl5/5.00503/sparc-linux/asm/unistd.ph
-/usr/lib/perl5/5.00503/sparc-linux/asm-sparc/unistd.ph
-/usr/lib/perl5/5.00503/sparc-linux/asm-sparc64/unistd.ph
-/usr/lib/perl5/5.00503/sparc-linux/auto/Data/Dumper/Dumper.bs
-/usr/lib/perl5/5.00503/sparc-linux/auto/Data/Dumper/Dumper.so
-/usr/lib/perl5/5.00503/sparc-linux/auto/IO/IO.so
-/usr/lib/perl5/5.00503/sparc-linux/auto/Socket/Socket.bs
-/usr/lib/perl5/5.00503/sparc-linux/auto/Socket/Socket.so
-/usr/lib/perl5/5.00503/sparc-linux/bits/syscall.ph
-/usr/lib/perl5/5.00503/sparc-linux/sys/syscall.ph
-/usr/lib/perl5/5.00503/sparc-linux/syscall.ph
-/usr/lib/perl5/5.00503/lib.pm
-/usr/lib/perl5/5.00503/overload.pm
-/usr/lib/perl5/5.00503/strict.pm
-/usr/lib/perl5/5.00503/vars.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Gtk.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Gtk/Types.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/Cmd.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/Config.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP/A.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP/I.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP/dataconn.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/Netrc.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/auto/Gtk/Gtk.bs
-/usr/lib/perl5/site_perl/5.005/sparc-linux/auto/Gtk/Gtk.so
-/usr/lib/rpm/rpmrc
-/usr/X11R6/bin/XF86_FBDev
-/usr/X11R6/bin/XF86_Mach64
-/usr/X11R6/bin/Xsun
-/usr/X11R6/bin/xmodmap
-/usr/X11R6/lib/modules/xf86Wacom.so
diff --git a/perl-install/live_install b/perl-install/live_install
deleted file mode 100755
index 937661a7d..000000000
--- a/perl-install/live_install
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/bin/sh
-
-if [ "$UID" -ne 0 ]; then
-    echo >&2 "you need to be root to start live install"
-    exit 3
-fi
-
-if [ -x ./Mandrake/mdkinst/usr/bin/perl-install/live_install2 ]; then
-    dir=`pwd`/Mandrake/mdkinst
-elif [ -x ../../../../../Mandrake/mdkinst/usr/bin/perl-install/live_install2 ]; then
-    dir=`pwd`/../../..
-else
-    echo >&2 "unable to get a working live system to start, check your working directory"
-    exit 2
-fi
-
-/bin/rm -rf /tmp/image
-/bin/mkdir -m 0700 /tmp/image || exit 1
-/bin/rm -rf /tmp/drakx
-/bin/mkdir -m 0700 /tmp/drakx || exit 2
-
-for i in Mandrake RPMS misc boot images VERSION
-do
-    /bin/ln -sf "$dir/../../$i" "/tmp/image/$i" 
-done
-
-/bin/cp -a "$dir/../../Mandrake/mdkinst" "/tmp/drakx"
-
-if [ -x "/tmp/drakx/mdkinst/usr/bin/perl-install/live_install2" ]; then
-    # get correct fonts for DrakX.
-    if [ -n "$DISPLAY" ]; then
-	xset +fp /tmp/drakx/mdkinst/usr/X11R6/lib/X11/fonts/
-	xset fp rehash
-    fi
-
-    # avoid pollution for environment
-    unset LC_MONETARY LC_CTYPE LC_NUMERIC LC_MESSAGES LC_TIME LC_COLLATE LANGUAGE LANG RPM_INSTALL_LANG
-
-    # start DrakX, do not keep shell script in background else the CD is locked by it!!!
-    cd /tmp/drakx/mdkinst/usr/bin/perl-install
-    exec /usr/bin/perl ./live_install2
-fi
-
-echo >&2 "unable to get a working live system to start, check your working directory"
-exit 2
diff --git a/perl-install/live_install2 b/perl-install/live_install2
deleted file mode 100755
index 58c5e9e83..000000000
--- a/perl-install/live_install2
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/usr/bin/perl
-
-my $dir = `pwd`;
-chomp $dir;
-$dir .= "/../../..";
-
-#- perl version of the install, we use directly the version we found,
-#- this means there SHOULD BE no module compiled for an older version of perl
-#- which will be used by DrakX.
-my ($version, $arch) = (glob "$dir/usr/lib/perl5/*/*/CORE/libperl.so")[0] =~ m|$dir/usr/lib/perl5/([^/]*)/([^/]*)/CORE/libperl.so|;
-
-#- keep it mind the ELF loader to use.
-$ENV{LD_LOADER} = "$dir/lib/ld-linux.so.2";
-
-$ENV{LOCPATH}="$dir/usr/share/locale";
-$ENV{GCONV_PATH}="$dir/usr/lib/gconv";
-$ENV{PERL5LIB} = join ":", map { "$dir/usr/lib/perl5/$_" } ("$version/$arch",
-							    "$version",
-							    "site_perl/$version/$arch",
-							    "site_perl/$version",
-							    "site_perl");
-$ENV{LD_LIBRARY_PATH} = "$dir/usr/bin:$dir/bin:$dir/sbin:$dir/usr/sbin:$dir/usr/X11R6/bin:$dir/lib:$dir/usr/lib:$dir/usr/lib/perl5/$version/$arch/CORE";
-$ENV{PATH} = join(":", map { "$dir/$_" } split ":", "/usr/bin:/bin:/sbin:/usr/sbin:/usr/X11R6/bin") . ":$ENV{PATH}";
-$ENV{SHARE_PATH} = "$dir/usr/share";
-$ENV{RPMRC_FILE} = "$dir/usr/lib/rpm/rpmrc";
-$ENV{GTK_DATA_PREFIX} = "$dir/usr";
-$ENV{GTK_EXE_PREFIX} = "$dir/usr";
-$ENV{GDK_IMLIB_PATH} = "$dir/usr/lib";
-
-system $ENV{LD_LOADER}, "../perl", "-i", "-pe", "s,^(.*macrofiles[^/]*)(.*),\$1$dir/usr/lib/rpm/macros:\$2,", $ENV{RPMRC_FILE};
-system $ENV{LD_LOADER}, "../perl", "./install2", "--live", @ARGV;
-
-#- at this point, unwind above else they will not run correctly (wrong ld-linux.so.2)
-delete $ENV{GTK_EXE_PREFIX};
-delete $ENV{RPMRC_FILE};
-delete $ENV{LOCPATH};
-delete $ENV{SHARE_PATH};
-delete $ENV{PATH};
-delete $ENV{LD_LIBRARY_PATH};
-delete $ENV{PERL5LIB};
-delete $ENV{LD_LOADER};
-
-$ENV{DISPLAY} and system "xset", "-fp", "/tmp/drakx/mdkinst/usr/X11R6/lib/X11/fonts/";
-foreach (qw(misc PEX Speedo Type1 mdk 75dpi 100dpi cyrillic)) {
-    -d "/usr/X11R6/lib/X11/fonts/$_" or next;
-    -e "/usr/X11R6/lib/X11/fonts/$_/fonts.dir" and next;
-    chdir "/usr/X11R6/lib/X11/fonts/$_";
-    system "mkfontdir";
-}
-$ENV{DISPLAY} and system "xset", "fp", "rehash";
-
-system "/bin/rm", "-rf", "/tmp/drakx";
-system "/bin/rm", "-rf", "/tmp/rhimage";
-
-exec "/bin/sync";
diff --git a/perl-install/log.pm b/perl-install/log.pm
deleted file mode 100644
index b049f5d49..000000000
--- a/perl-install/log.pm
+++ /dev/null
@@ -1,60 +0,0 @@
-package log; # $Id$
-
-use diagnostics;
-use strict;
-use c;
-
-
-#-#####################################################################################
-#- Globals
-#-#####################################################################################
-my $logOpen = 0;
-my $logDebugMessages = 0;
-
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub F() { *LOG }
-
-sub l {
-    $logOpen or openLog();
-    if ($::isStandalone) {
-	c::syslog(join "", @_);
-    } elsif ($::isInstall) {
-	print LOG "* ", @_, "\n";
-	print LOG2 "* ", @_, "\n";
-    } else {
-	print STDERR @_, "\n";
-    }
-}
-sub ld { $logDebugMessages and &l }
-sub w { &l }
-
-sub openLog(;$) {
-    if ($::isStandalone) {
-	c::openlog("DrakX");
-    } elsif ($::isInstall) {
-	if ($_[0]) { #- useLocal
-	    open LOG, "> $_[0]";# or die "no log possible :(";
-	} else {
-	    open LOG, "> /dev/tty3" or open LOG, ">> /tmp/install.log";# or die "no log possible :(";
-	}
-	open LOG2, ">> /tmp/ddebug.log";# or die "no log possible :(";
-	select((select(LOG),  $| = 1)[0]);
-	select((select(LOG2), $| = 1)[0]);
-    }
-    exists $ENV{DEBUG} and $logDebugMessages = 1;
-    $logOpen = 1;
-}
-
-sub closeLog() { 
-    if ($::isStandalone) {
-	c::closelog();
-    } else { close LOG; close LOG2; }
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/loopback.pm b/perl-install/loopback.pm
deleted file mode 100644
index 24c519ecb..000000000
--- a/perl-install/loopback.pm
+++ /dev/null
@@ -1,129 +0,0 @@
-package loopback; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::System;
-use common;
-use partition_table qw(:types);
-use fs;
-use fsedit;
-use log;
-
-
-sub carryRootLoopback {
-    my ($part) = @_;
-    $_->{mntpoint} eq '/' and return 1 foreach @{$part->{loopback} || []};
-    0;
-}
-
-sub check_circular_mounts {
-    my ($hd, $part, $all_hds) = @_;
-
-    my $fstab = [ fsedit::get_all_fstab($all_hds), $part ]; # no pb if $part is already in $all_hds
-
-    my $base_mntpoint = $part->{mntpoint};
-    my $check; $check = sub {
-	my ($part, @seen) = @_;
-	push @seen, $part->{mntpoint} || return;
-	@seen > 1 && $part->{mntpoint} eq $base_mntpoint and die _("Circular mounts %s\n", join(", ", @seen));
-	if (my $part = fs::up_mount_point($part->{mntpoint}, $fstab)) {
-	    #- '/' carrier is a special case, it will be mounted first
-	    $check->($part, @seen) if !carryRootLoopback($part);
-	}
-	if (isLoopback($part)) {
-	    $check->($part->{loopback_device}, @seen);
-	}
-    };
-    $check->($part) if !($base_mntpoint eq '/' && isLoopback($part)); #- '/' is a special case, no loop check
-}
-
-sub carryRootCreateSymlink {
-    my ($part, $prefix) = @_;
-
-    carryRootLoopback($part) or return;
-
-    my $mntpoint = "$prefix$part->{mntpoint}";
-    unless (-e $mntpoint) {
-	eval { mkdir_p(dirname($mntpoint)) };
-	#- do non-relative link for install, should be changed to relative link before rebooting
-	symlink "/initrd/loopfs", $mntpoint;
-
-	mkdir_p("/initrd/loopfs/lnx4win/boot");
-	symlink "/initrd/loopfs/lnx4win/boot", "$prefix/boot";
-    }
-    #- indicate kernel to keep initrd
-    mkdir "$prefix/initrd", 0755;
-}
-
-
-sub format_part {
-    my ($part, $prefix) = @_;
-    fs::mount_part($part->{loopback_device}, $prefix);
-    create($part, $prefix);
-    fs::real_format_part($part);
-}
-
-sub create {
-    my ($part, $prefix) = @_;
-    my $f = $part->{device} = "$prefix$part->{loopback_device}{mntpoint}$part->{loopback_file}";
-    return if -e $f;
-
-    eval { mkdir_p(dirname($f)) };
-
-    log::l("creating loopback file $f ($part->{size} sectors)");
-
-    local *F;
-    my $block_size = 128;
-    my $s = "\0" x (512 * $block_size);
-    sysopen F, $f, 2 | c::O_CREAT() or die "failed to create loopback file";
-    for (my $i = 0; $i < $part->{size}; $i += $block_size) {
-	syswrite F, $s or die "failed to create loopback file";
-    }
-}
-
-sub getFree {
-    my ($dir, $part) = @_;
-    my $freespace = $dir ? 
-      2 * (MDK::Common::System::df($dir))[1] : #- df in KiB
-      $part->{size};
-
-    $freespace - sum map { $_->{size} } @{$part->{loopback} || []};
-}
-
-#- returns the size of the loopback file if it already exists
-#- returns -1 is the loopback file can't be used
-sub verifFile {
-    my ($dir, $file, $part) = @_;
-    -e "$dir$file" and return -s "$dir$file";
-
-    $_->{loopback_file} eq $file and return -1 foreach @{$part->{loopback} || []};
-
-    undef;
-}
-
-sub prepare_boot {
-    my ($prefix) = @_;
-    my $r = readlink "$prefix/boot"; 
-    unlink "$prefix/boot"; 
-    mkdir "$prefix/boot", 0755;
-    [$r, $prefix];
-}
-
-sub save_boot {
-    my ($loop_boot, $prefix) = @{$_[0]};
-    
-    $loop_boot or return;
-
-    my @files = glob_("$prefix/boot/*");
-    cp_af(@files, $loop_boot) if @files;
-    rm_rf("$prefix/boot");
-    symlink $loop_boot, "$prefix/boot";
-}
-
-
-1;
-
diff --git a/perl-install/lvm.pm b/perl-install/lvm.pm
deleted file mode 100644
index 3ff0b4612..000000000
--- a/perl-install/lvm.pm
+++ /dev/null
@@ -1,111 +0,0 @@
-package lvm; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use modules;
-use fsedit;
-use devices;
-use run_program;
-
-#- for partition_table_xxx emulation
-sub hasExtended { 0 }
-sub adjustStart {}
-sub adjustEnd {}
-sub write {}
-sub cylinder_size { 
-    my ($hd) = @_;
-    $hd->{PE_size};
-}
-
-init();
-
-sub init {
-    eval { modules::load('lvm-mod') };
-    run_program::run('vgscan') if !-e '/etc/lvmtab';
-    run_program::run('vgchange', '-a', 'y');
-}
-
-sub check {
-    my ($in) = @_;
-
-    my $f = '/sbin/pvcreate';
-    -e $f or $in->do_pkgs->install('lvm');
-    -e $f or $in->ask_warn('', "Mandatory package lvm is missing"), return;
-    init();
-    1;
-}
-
-sub get_vg {
-    my ($part) = @_;
-    my $dev = expand_symlinks(devices::make($part->{device}));
-    (split(':', `pvdisplay -c $dev`))[1];
-}
-
-sub update_size {
-    my ($lvm) = @_;
-    my @l = split(':', `vgdisplay -c -D $lvm->{LVMname}`);
-    $lvm->{totalsectors} = ($lvm->{PE_size} = $l[12]) * $l[13];
-}
-
-sub get_lvs {
-    my ($lvm) = @_;
-    $lvm->{primary}{normal} = 
-      [
-       map {
-	   my $type = -e $_ && fsedit::typeOfPart($_);
-	   { device => $_, 
-	     type => $type || 0x83,
-	     size => (split(':', `lvdisplay -D -c $_`))[6] }
-       } map { /^LV Name\s+(\S+)/ ? $1 : () } `vgdisplay -v -D $lvm->{LVMname}`
-      ];
-}
-
-sub vg_add {
-    my ($part) = @_;
-    if (my $old_name = get_vg($part)) {
-	run_program::run('vgchange', '-a', 'n', $old_name);
-	run_program::run('vgremove', $old_name);	
-    }
-    my $dev = expand_symlinks(devices::make($part->{device}));
-    run_program::run_or_die('pvcreate', $dev);
-    my $prog = run_program::run('vgdisplay', $part->{lvm}) ? 'vgextend' : 'vgcreate';
-    run_program::run_or_die($prog, $part->{lvm}, $dev);
-}
-
-sub vg_destroy {
-    my ($lvm) = @_;
-
-    is_empty_array_ref($lvm->{primary}{normal}) or die _("Remove the logical volumes first\n");
-    run_program::run('vgchange', '-a', 'n', $lvm->{LVMname});
-    run_program::run_or_die('vgremove', $lvm->{LVMname});
-    foreach (@{$lvm->{disks}}) {
-	delete $_->{lvm};
-	$_->{isFormatted} = 0;
-	$_->{notFormatted} = 1;	
-    }
-}
-
-sub lv_delete {
-    my ($lvm, $lv) = @_;
-
-    run_program::run_or_die('lvremove', '-f', $lv->{device});
-
-    my $list = $lvm->{primary}{normal};
-    @$list = grep { $_ != $lv } @$list;
-}
-
-sub lv_create {
-    my ($lvm, $lv) = @_;
-    my $list = $lvm->{primary}{normal};
-    my $nb = 1 + max(map { basename($_->{device}) } @$list);
-    $lv->{device} = "/dev/$lvm->{LVMname}/$nb";
-    run_program::run_or_die('lvcreate', '--size', int($lv->{size} / 2) . 'k', '-n', $nb, $lvm->{LVMname});
-    push @$list, $lv;
-}
-
-1;
diff --git a/perl-install/modparm.pm b/perl-install/modparm.pm
deleted file mode 100644
index f1c81b0dd..000000000
--- a/perl-install/modparm.pm
+++ /dev/null
@@ -1,43 +0,0 @@
-package modparm; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use log;
-
-
-sub get_options_result($@) {
-    my ($module, @value) = @_;
-    mapn {
-	my ($a, $b) = @_;
-	$b =~ s/^(\w).*/$1/;
-	$a ? "$b=$a" : ();
-    } \@value, [get_options_name($module)];
-}
-
-sub get_options_name($) {
-  my ($module) = @_;
-
-  my @names;
-  my @line = `/sbin/modinfo -p $module`;
-  foreach (@line) {
-      chomp;
-      s/int/i/;
-      s/string/string/;
-      s/short/h/;
-      s/long/l/;
-      s/(\S) array \(min = (\d+), max = (\d+)\)/$2-$3$1/;
-      s/(\d)-\1i/$1i/;
-      if (/parm:\s+(.+)/) {
-	  my ($name, $type) = split '\s', $1;
-	  push @names, "$name ($type)";
-      }
-  }
-  @names;
-}
-
-1;
diff --git a/perl-install/modules.pm b/perl-install/modules.pm
deleted file mode 100644
index cec1fa16f..000000000
--- a/perl-install/modules.pm
+++ /dev/null
@@ -1,842 +0,0 @@
-package modules; # $Id$
-
-use strict;
-use vars qw(%drivers);
-
-use common;
-use detect_devices;
-use run_program;
-use log;
-
-
-my %conf;
-my %deps = ();
-
-my @drivers_by_category = (
-[ 'net', {
-if_(arch() =~ /ppc/,
-  "mace" => "Apple PowerMac Ethernet",
-  "bmac" => "Apple G3 Ethernet",
-  "gmac" => "Apple G4/iBook Ethernet",
-),
-if_(arch() =~ /^sparc/,
-  "myri_sbus" => "MyriCOM Gigabit Ethernet",
-  "sunbmac" => "Sun BigMac Ethernet",
-  "sunhme" => "Sun Happy Meal Ethernet",
-  "sunqe" => "Sun Quad Ethernet",
-),
-if_(arch() !~ /alpha/ && arch() !~ /sparc/,
-  "3c501" => "3com 3c501",
-  "3c503" => "3com 3c503",
-  "3c505" => "3com 3c505",
-  "3c507" => "3com 3c507",
-  "3c509" => "3com 3c509",
-  "3c515" => "3com 3c515",
-  "3c90x" => "3Com 3c90x (Cyclone/Hurricane/Tornado)",
-  "3c90x" => "3Com 3c90x (Cyclone/Hurricane/Tornado)",
-  "82596" => "Apricot 82596",
-  "abyss" => "Smart 16/4 PCI Ringnode (token ring)",
-  "ac3200" => "Ansel Communication AC3200",
-  "acenic" => "AceNIC Gigabit Ethernet",
-  "aironet4500_card" => "aironet4500_card",
-  "at1700" => "Allied Telesis AT1700",
-  "atp" => "ATP", 
-  "catc" => "CATC EL1210A NetMate USB Ethernet driver",
-  "CDCEther" => "CDCEther",
-  "com20020-pci" => "com20020-pci",
-  "cs89x0" => "CS89x0",
-  "de600" => "D-Link DE-600 pocket adapter",
-  "de620" => "D-Link DE-620 pocket adapter",
-  "defxx" => "DEC DEFPA FDDI", # most unused
-  "depca" => "Digital DEPCA and EtherWORKS",
-  "dgrs" => "Digi International RightSwitch",
-  "dmfe" => "dmfe",
-  "e100" => "Intel Ethernet Pro 100", #- newer Intel version of eepro100
-  "e1000" => "Intel Gigabit Ethernet",
-  "e2100" => "Cabletron E2100",
-  "eepro" => "Intel EtherExpress Pro",
-  "eepro100" => "Intel EtherExpress Pro 100", #- should run on sparc but no memory on floppy
-  "eexpress" => "Intel EtherExpress",
-  "epic100" => "SMC 83c170 EPIC/100",
-  "eth16i" => "ICL EtherTeam 16i",
-  "ewrk3" => "Digital EtherWORKS 3",
-  "hamachi" => "Packet Engines Inc.|PCI Ethernet Adapter",
-  "hp" => "HP LAN/AnyLan",
-  "hp-plus" => "HP PCLAN/plus",
-  "hp100" => "HP10/100VG any LAN ",
-  "ibmtr" => "Token Ring Tropic",
-  "kaweth" => "kaweth",
-# requires scsi_mod???  "iph5526" => "iph5526",
-  "lance" => "Lance",
-  "natsemi" => "National Semiconductor 10/100",
-  "ne" => "NE1000, NE2000, and clones",
-  "ne2k-pci" => "NE2000 PCI clones",
-  "ni5010" => "NI 5010",
-  "ni52" => "NI 5210",
-  "ni65" => "NI 6510",
-  "old_tulip" => "Digital 21040/21041/21140 (old Tulip driver)",
-  "olympic" => "IBM|16/4 Token ring UTP/STP controller",
-  "pcnet32" => "AMD PC/Net 32",
-  "pegasus" => "pegasus", 
-  "plip" => "PLIP (parallel port)",
-  "rcpci" => "Red Creek Hardware VPN",
-  "rrunner" => "Roadrunner serial HIPPI", # mostly unused
-  "sb1000" => "sb1000",
-  "sis900" => "sis900",
-  "sk98lin" => "Syskonnect (Schneider & Koch)|Gigabit Ethernet",
-  "sktr" => "Syskonnect Token ring adaptor",
-  "smc-ultra" => "SMC Ultra",
-  "smc9194" => "SMC 9000 series",
-  "starfire" => "Adaptec|ANA620xx/ANA69011A Fast Ethernet",
-  "tlan" => "Compaq Netelligent, Olicom OC-2xxx",
-  "tmspci" => "3Com Token Link Velocity, Compaq IPG-Austin Token Ring",
-  "tulip" => "Digital 21040/21041/21140 (Tulip)",
-  "via-rhine" => "VIA VT86c100A Rhine-II, 3043 Rhine-I",
-#  "wavelan" => "AT&T WaveLAN & DEC RoamAbout DS", # TODO is a "AT&T GIS WaveLAN ISA" ?
-  "wd" => "WD8003, WD8013 and compatible",
-  "winbond-840" => "Compex RL100-ATX",
-  "yellowfin" => "Symbios Yellowfin G-NIC",
-#******(missing-2.4)    "smc-ultra32" => "SMC Ultra 32",
-#******(missing-2.4)  "rl100a" => "rl100a",
-#******(missing-2.4)  "z85230" => "Z85x30",
-),
-  "3c59x" => "3com Vortex/Boomerang/Hurricane/Cyclone/Etherlink",
-  "8139too" => "Realtek RTL-8139",
-  "de4x5" => "Digital 425,434,435,450,500",
-  "rtl8139" => "RealTek RTL8129/8139",
-  "sundance" => "sundance",
-}],
-[ 'net_raw', {
-  "8390" => "8390",
-  "af_packet" => "packet socket",
-  "nfs" => "Network File System (nfs)",
-  "lockd" => "lockd",
-  "parport" => "parport",
-  "parport_pc" => "parport_pc",
-  "sunrpc" => "sunrpc",
-  "pci-scan" => "pci-scan",
-  "ppp" => "Point to Point driver",
-  "ppp_generic" => "Point to Point generic driver",
-  "ppp_async" => "ppp_async",
-  "slhc" => "slhc",
-}],
-[ 'usbnet', {
-  "pegasus" => "pegasus",
-  "kaweth" => "kaweth",
-  "usbnet" => "usbnet",
-  "catc" => "CATC EL1210A NetMate USB Ethernet driver",
-  "CDCEther" => "CDCEther",
-}],
-[ 'isdn', {
-   "hisax" => "hisax",
-   "hysdn" => "hysdn",
-   "b1pci" => "b1pci",
-   "t1pci" => "t1pci",
-   "c4" => "c4",
-}],
-[ 'tv', {
- "bttv" => "Brooktree Corporation|Bt8xx Video Capture",
- "cpia_usb" => '',
- "ibmcam" => '',
- "mod_quickcam" => '',
- "ov511" => '',
- "ultracam" => '',
- "usbvideo" => '',
-}],
-[ 'scanner', {
- "scanner" => '',
- "microtek" => '',
-}],
-[ 'photo', {
- "dc2xx" => '',
- "mdc800" => '',
-}],
-[ 'joystick', {
-   "ns558" => "Creative Labs SB Live! joystick",
-}],
-[ 'radio', {
-   "radio-maxiradio" => "radio-maxiradio",
-}],
-[ 'scsi', {
-if_(arch() =~ /ppc/,
-  "mesh" => "Apple Internal SCSI",
-  "mac53c94" => "Apple External SCSI",
-),
-if_(arch() =~ /^sparc/,
-  "qlogicpti" => "Performance Technologies ISP",
-),
-if_(arch() !~ /alpha/ && arch() !~ /sparc/,
-  "3w-xxxx" => "3ware ATA-RAID",
-  "53c7,8xx" => "NCR 53c7xx",
-  "AM53C974" => "AMD SCSI",
-  "BusLogic" => "BusLogic Adapters",
-  "NCR53c406a" => "NCR 53c406a",
-  "a100u2w" => "a100u2w",
-  "advansys" => "AdvanSys Adapters",
-  "aha152x" => "Adaptec 152x",
-  "aha1542" => "Adaptec 1542",
-  "aha1740" => "Adaptec 1740",
-  "atp870u" => "atp870u (Acard/Artop)",
-  "dc395x_trm" => "dc395x_trm",
-  "dtc" => "DTC 3180/3280",
-  "fdomain" => "Future Domain TMC-16x0",
-  "g_NCR5380" => "NCR 5380",
-  "in2000" => "Always IN2000",
-  "initio" => "Initio",
-  "pci2220i" => "Perceptive Solutions 2240I",
-  "psi240i" => "psi240i",
-  "qla1280" => "Q Logic QLA1280",
-  "qla2x00" => "Q Logic QLA2200",
-  "qlogicfas" => "Qlogic FAS",
-  "qlogicfc" => "qlogicfc",
-  "seagate" => "Seagate ST01/02",
-  "sim710" => "NCR53c710",
-  "sym53c416" => "sym53c416",
-  "t128" => "Trantor T128/T128F/T228",
-  "tmscsim" => "tmscsim",
-  "u14-34f" => "UltraStor 14F/34F",
-  "ultrastor" => "UltraStor 14F/24F/34F",
-  "wd7000" => "Western Digital wd7000",
-),
-  "aic7xxx" => "Adaptec 2740, 2840, 2940",
-  "ncr53c8xx" => "NCR 53C8xx PCI",
-  "pci2000" => "Perceptive Solutions PCI-2000", # TODO
-  "qlogicisp" => "Qlogic ISP",
-  "sym53c8xx" => "Symbios 53c8xx",
-}],
-[ 'scsi_raw', {
-  "scsi_mod" => "SCSI subsystem support",
-  "sd_mod" => "Disk SCSI support",
-#-  "ide-mod" => "ide-mod",
-#-  "ide-probe" => "ide-probe",
-#-  "ide-probe-mod" => "ide-probe-mod",
-}],
-[ 'disk', {
-if_(arch() =~ /^sparc/,
-  "pluto" => "Sun SparcSTORAGE Array SCSI", #- name it "fc4:soc:pluto" ?
-),
-if_(arch() !~ /alpha/ && arch() !~ /sparc/,
-  "DAC960" => "Mylex DAC960",
-  "dpt_i2o" => "Distributed Tech SmartCache/Raid I-V Controller",
-  "megaraid" => "AMI MegaRAID",
-  "aacraid" => "AACxxx Raid Controller",
-  "ataraid" => "",
-  "cciss" => "Compaq Smart Array 5300 Controller",
-  "cpqarray" => "Compaq Smart-2/P RAID Controller",
-  "gdth" => "ICP Disk Array Controller",
-  "i2o_block" => "Intel Integrated RAID",
-  "ips" => "IBM ServeRAID controller",
-  "eata" => "EATA SCSI PM2x24/PM3224",
-  "eata_pio" => "EATA PIO Adapters",
-  "eata_dma" => "EATA DMA Adapters",
-  "ppa" => "Iomega PPA3 (parallel port Zip)",
-  "imm" => "Iomega Zip (new driver, for post 31/Aug/1998 drives)",
-),
-}],
-[ 'disk_raw', {
-#-  "ide-disk" => "IDE disk",
-}],
-[ 'cdrom', {
-if_(arch() !~ /alpha/ && arch() !~ /sparc/,
-#******(missing-2.4)  "sbpcd" => "SoundBlaster/Panasonic",
-#******(missing-2.4)  "aztcd" => "Aztech CD",
-#******(missing-2.4)  "gscd" => "Goldstar R420",
-#******(missing-2.4)  "isp16" => "ISP16/MAD16/Mozart",
-#******(missing-2.4)  "mcd" => "Mitsumi", #- removed for space
-#******(missing-2.4)  "mcdx" => "Mitsumi (alternate)",
-#******(missing-2.4)  "optcd" => "Optics Storage 8000",
-#******(missing-2.4)  "cm206" => "Phillips CM206/CM260",
-#******(missing-2.4)  "sjcd" => "Sanyo",
-#******(missing-2.4)  "cdu31a" => "Sony CDU-31A",
-#******(missing-2.4) "sonycd535" => "Sony CDU-5xx",
-),
-}],
-[ 'cdrom_raw', {
-  "isofs" => "iso9660",
-  "ide-cd" => "ide-cd",
-  "sr_mod" => "SCSI CDROM support",
-  "cdrom" => "cdrom",
-}],
-[ 'sound', {
-if_(arch() =~ /ppc/,
-  "dmasound_awacs" => "Amiga or PowerMac DMA sound",
-),
-if_(arch() !~ /^sparc/,
-  "cmpci" => "C-Media Electronics CMI8338A CMI8338B CMI8738",
-  "cs46xx" => "Cirrus Logic CrystalClear SoundFusion (cs46xx)",
-  "cs4281" => "Cirrus Logic|Crystal CS4281 PCI Audio",
-  "es1370" => "Ensoniq ES1370 [AudioPCI]",
-  "es1371" => "Ensoniq ES1371 [AudioPCI-97]",
-  "esssolo1" => "ESS Technology ES1969 Solo-1 Audiodrive",
-  "i810_audio" => "i810 integrated sound card",
-  "maestro" => "ESS Maestro 1/2",
-  "maestro3" => "ESS Maestro-3",
-  "nm256" => "Neomagic MagicMedia 256AV",
-  "pas16" => "Pro Audio Spectrum/Studio 16",
-  "trident" => "M5451 PCI South Bridge Audio",
-  "via82cxxx" => "VIA VT82C686_5",
-  "via82cxxx_audio" => "VIA Technologies|VT82C686 [Apollo Super AC97/Audio]",
-  "sonicvibes" => "S3 SonicVibes",
-  "snd-card-ice1712" => "IC Ensemble Inc|ICE1712 [Envy24]",
-  "emu10k1" => "Creative Labs|SB Live! (audio)",
-  "ymfpci" => "Yamaha YMF-740, DS-1",
-#  "au8820" => "Aureal Semiconductor|Vortex 1",
-#  "au8830" => "Aureal Semiconductor|Vortex 2",
-  "snd-card-cmipci" => "CMI",
-  "snd-card-cs461x" => "Cirrus Logic|CS 4610/11 [CrystalClear SoundFusion Audio Accelerator]",
-  "snd-card-ens1371" => "Ensoniq/Creative Labs ES1371",
-  "snd-card-es1938" => "ESS Technology|ES1969 Solo-1 Audiodrive",
-  "snd-card-fm801" => "Fortemedia, Inc|Xwave QS3000A [FM801]<>Fortemedia, Inc|FM801 PCI Audio",
-  "snd-card-intel8x0" => "Intel Corporation|82440MX AC'97 Audio Controller<>Intel Corporation",
-  "snd-card-rme96" => "Xilinx, Inc.|RME Digi96<>Xilinx, Inc.",
-  "snd-card-trident" => "Silicon Integrated Systems [SiS]|7018 PCI Audio",
-  "snd-card-via686a" => "VIA Technologies|VT82C686 [Apollo Super AC97/Audio]",
-  "snd-card-ymfpci" => "Yamaha Corporation|YMF-740",
-),
-}],
-[ 'pcmcia', {
-if_(arch() !~ /^sparc/,
-  "ide_cs" => "ide_cs",
-  "fmvj18x_cs" => "fmvj18x_cs",
-  "fdomain_cs" => "fdomain_cs",
-  "netwave_cs" => "netwave_cs",
-  "serial_cs" => "serial_cs",
-  "wavelan_cs" => "wavelan_cs",
-  "pcnet_cs" => "pcnet_cs",
-  "axnet_cs" => "axnet_cs",
-  "aha152x_cs" => "aha152x_cs",
-  "xirc2ps_cs" => "xirc2ps_cs",
-  "3c574_cs" => "3c574_cs",
-  "qlogic_cs" => "qlogic_cs",
-  "nmclan_cs" => "nmclan_cs",
-  "ibmtr_cs" => "ibmtr_cs",
-#  "dummy_cs" => "dummy_cs",
-#  "memory_cs" => "memory_cs",
-  "ftl_cs" => "ftl_cs",
-  "smc91c92_cs" => "smc91c92_cs",
-  "3c589_cs" => "3c589_cs",
-#******(missing-2.4)   "parport_cs" => "parport_cs", 
-  "3c575_cb" => "3c575_cb",
-  "apa1480_cb" => "apa1480_cb",
-  "cb_enabler" => "cb_enabler",
-  "epic_cb" => "epic_cb",
-  "iflash2+_mtd" => "iflash2+_mtd",
-  "iflash2_mtd" => "iflash2_mtd",
-#  "memory_cb" => "memory_cb",
-  "serial_cb" => "serial_cb",
-#  "sram_mtd" => "sram_mtd",
-  "tulip_cb" => "tulip_cb",
-
-),
-}],
-[ 'pcmcia_everywhere', {
-if_(arch() !~ /^sparc/,
-  "pcmcia_core" => "PCMCIA core support",
-  "tcic" => "PCMCIA tcic controller",
-  "ds" => "PCMCIA card support",
-  "i82365" => "PCMCIA i82365 controller",
-),
-}],
-[ 'paride', {
-if_(arch() !~ /^sparc/,
-  "aten" => "ATEN EH-100",
-  "bpck" => "Microsolutions backpack",
-  "comm" => "DataStor (older type) commuter adapter",
-  "dstr" => "DataStor EP-2000",
-  "epat" => "Shuttle EPAT",
-  "epia" => "Shuttle EPIA",
-  "fit2" => "Fidelity Intl. (older type)",
-  "fit3" => "Fidelity Intl. TD-3000",
-  "frpw" => "Freecom Power",
-  "friq" => "Freecom IQ (ASIC-2)",
-  "kbic" => "KingByte KBIC-951A and KBIC-971A",
-  "ktti" => "KT Tech. PHd",
-  "on20" => "OnSpec 90c20",
-  "on26" => "OnSpec 90c26",
-  "pd"   => "Parallel port IDE disks",
-  "pcd"  => "Parallel port CD-ROM",
-  "pf"   => "Parallel port ATAPI disk",
-  "paride" => "Main parallel port module",
-),
-}],
-[ 'raid', {
-  "linear" => "linear",
-  "raid0" => "raid0",
-  "raid1" => "raid1",
-  "raid5" => "raid5",
-}],
-[ 'mouse', {
-if_(arch() !~ /^sparc/,
-  "busmouse" => "busmouse",
-  "msbusmouse" => "msbusmouse",
-  "serial" => "serial",
-  "qpmouse" => "qpmouse",
-  "atixlmouse" => "atixlmouse",
-),
-}],
-[ 'usb', {
-  "usbcore" => "usbcore",
-  "usb-uhci" => "USB Controller (uhci)",
-  "usb-ohci" => "USB Controller (ohci)",
-  "usb-ohci-hcd" => "USB (ohci-hcd)",
-}],
-[ 'fs', {
-  "smbfs" => "Windows SMB",
-  "fat" => "fat",
-  "romfs" => "romfs",
-  "vfat" => "vfat",
-}],
-[ 'other', {
-  "agpgart" => "agpgart",
-  "buz" => "Zoran Corporation|ZR36057PQC Video cutting chipset",
-  "defxx" => "DEC|DEFPA",
-  "i810_rng" => "i810_rng",
-  "ide-floppy" => "ide-floppy",
-  "ide-scsi" => "ide-scsi",
-  "ide-tape" => "ide-tape",
-  "loop" => "Loopback device",
-  "lp" => "Parallel Printer",
-  "nbd" => "nbd",
-  "rrunner" => "Essential Communications|Roadrunner serial HIPPI",
-  "sg" => "sg",
-  "st" => "st",
-}],
-);
-
-my %type_aliases = (
-  scsi => 'disk',
-);
-
-my @skip_big_modules_on_stage1 = (
-# dgrs e1000
-qw(
-olympic
-sk98lin acenic
-3c90x
-aironet4500_card com20020-pci hamachi starfire winbond-840
-
-dc395x_trm
-BusLogic seagate fdomain g_NCR5380
-)
-); #******(missing-2.4)  dpt_i2o aztcd gscd isp16 mcd mcdx optcd cm206 sjcd cdu31a
-
-my @skip_modules_on_stage1 = (
-  qw(sktr tmspci ibmtr abyss), # alt token ring
-  qw(old_tulip rtl8139), # doesn't exist in 2.4
-  if_(arch() =~ /alpha|ppc/, qw(sb1000)),
-  "apa1480_cb",
-  "imm",
-  "ppa",
-  "parport",
-  "parport_pc",
-  "plip",
-  qw(3w-xxxx pci2220i qla2x00 i2o_block),
-  qw(eata eata_pio eata_dma),
-  'AM53C974', # deprecated by tmscsim
-  qw(ac3200 at1700 atp ni5010 ni52 ni65),  #- unused from Jeff
-  "u14-34f", #- duplicate from ultrastor.o
-);
-
-
-my @drivers_fields = qw(text type);
-%drivers = ();
-
-foreach (@drivers_by_category) {
-    my ($type, $l) = @$_;
-    foreach (keys %$l) { $drivers{$_} = [ $l->{$_}, $type ]; }
-}
-while (my ($k, $v) = each %drivers) {
-    my %l; @l{@drivers_fields} = @$v;
-    $drivers{$k} = \%l;
-}
-
-sub module_of_type__4update_kernel {
-    my ($type) = @_;
-    $type = join "|", map { $_, $_ . "_raw" } split ' ', $type;
-    my %skip; 
-    @skip{@skip_modules_on_stage1} = ();
-    @skip{@skip_big_modules_on_stage1} = () if $type !~ /big/;
-    "big" =~ /^($type)$/ ? @skip_big_modules_on_stage1 : (),
-      grep { !exists $skip{$_} } grep { $drivers{$_}{type} =~ /^($type)$/ } keys %drivers;
-}
-sub module_of_type {
-    my ($type) = @_;
-    my $alias = $type_aliases{$type} || $type;
-    grep { $drivers{$_}{type} =~ /^(($type)|$alias)$/ } keys %drivers;
-}
-sub module2text { $drivers{$_[0]}{text} or log::l("trying to get text of unknown module $_[0]"), return $_[0] }
-
-sub get_alias {
-    my ($alias) = @_;
-    $conf{$alias}{alias};
-}
-sub get_options {
-    my ($name) = @_;
-    $conf{$name}{options};
-}
-
-sub set_options {
-    my ($name, $new_option) = @_;
-    $conf{$name}{options} = $new_option;
-}
-
-sub add_alias { 
-    my ($alias, $name) = @_;
-    $name =~ /ignore/ and return;
-    /\Q$alias/ && $conf{$_}{alias} && $conf{$_}{alias} eq $name and return $_ foreach keys %conf;
-    if ($alias eq 'scsi_hostadapter') {
-	my $l = $conf{scsi_hostadapter}{probeall} ||= [];
-	push @$l, $name;
-	log::l("setting probeall scsi_hostadapter to @$l");
-    } else {
-	log::l("adding alias $alias to $name");
-	$conf{$alias}{alias} ||= $name;
-    }
-    if ($name =~ /^snd-card-/) {
-	$conf{$name}{above} = 'snd-pcm-oss';
-    }
-    $alias;
-}
-
-sub remove_alias($) {
-    my ($name) = @_;
-    foreach (keys %conf) {
-	$conf{$_}{alias} && $conf{$_}{alias} eq $name or next;
-	delete $conf{$_}{alias};
-	return 1;
-    }
-    0;
-}
-
-sub when_load {
-    my ($name, $type, @options) = @_;
-    if ($type =~ /\bscsi\b/ || $type eq $type_aliases{scsi}) {
-	add_alias('scsi_hostadapter', $name), eval { load('sd_mod') };
-    }
-    if ($type eq 'sound') {
-	#- mainly for ppc
-	add_alias('sound-slot-0', $name);
-    }
-    if ($name =~ /^snd-card-/) {
-	load('snd-pcm-oss', 'prereq');
-    }
-    $conf{$name}{options} = join " ", @options if @options;
-}
-
-sub load {
-    my ($name, $type, @options) = @_;
-
-    my @netdev = detect_devices::getNet() if $type eq 'net';
-
-    if ($::testing) {
-	log::l("i try to install $name module (@options)");
-    } elsif ($::isStandalone || $::live) {
-	run_program::run(-x "/sbin/modprobe.static" ? "/sbin/modprobe.static" : "/sbin/modprobe", $name, @options)
-	    or die "insmod'ing module $name failed";
-    } else {
-	$conf{$name}{loaded} and return;
-
-	eval { load($_, 'prereq') } foreach @{$deps{$name}};
-	load_raw([ $name, @options ]);
-    }
-    sleep 2 if $name =~ /usb-storage|mousedev/;
-
-    if ($type eq 'net') {
-	add_alias($_, $name) foreach difference2([ detect_devices::getNet() ], \@netdev);
-    }
-    when_load($name, $type, @options);
-}
-sub load_multi {
-    my $f; $f = sub { map { $f->(@{$deps{$_}}), $_ } @_ };
-    my %l; my @l = 
-      grep { !$conf{$_}{loaded} }
-      grep { my $o = $l{$_}; $l{$_} = 1; !$o }
-      $f->(@_);
-
-    if ($::testing) {
-	log::l("i would install modules @l");
-    } elsif ($::isStandalone || $::live) {
-	foreach (@l) { run_program::run(-x "/sbin/modprobe.static" ? "/sbin/modprobe.static" : "/sbin/modprobe", $_) }
-    } else {
-	load_raw(map { [ $_ ] } @l);
-    }
-}
-
-sub unload {
-    my ($m) = @_; 
-    if ($::testing) {
-	log::l("rmmod $m");
-    } else {
-	if (run_program::run("rmmod", $m)) {
-	    delete $conf{$m}{loaded};
-	}
-    }
-}
-
-sub cz_file { 
-    "/lib/modules" . (arch() eq 'sparc64' && "64") . ".cz-" . c::kernel_version();
-}
-
-sub load_raw {
-    my @l = map { my ($i, @i) = @$_; [ $i, \@i ] } grep { $_->[0] !~ /ignore/ } @_;
-    my $cz = cz_file();
-    if (!-e $cz) {
-	unlink $_ foreach glob_("/lib/modules*.cz*");
-	require install_any;
-        install_any::getAndSaveFile("Mandrake/mdkinst$cz", $cz) or die "failed to get modules $cz: $!";
-    }
-    eval {
-	require packdrake;
-	my $packer = new packdrake($cz, quiet => 1);
-	$packer->extract_archive("/tmp", map { "$_->[0].o" } @l);
-    };
-    my @failed = grep {
-	my $m = "/tmp/$_->[0].o";
-	if (-e $m && run_program::run(["/usr/bin/insmod_", "insmod"], '2>', '/dev/tty5', '-f', $m, @{$_->[1]})) {
-	    unlink $m;
-	    $conf{$_->[0]}{loaded} = 1;
-	    '';
-	} else {
-	    log::l("missing module $_->[0]") unless -e $m;
-	    -e $m;
-	}
-    } @l;
-
-    die "insmod'ing module " . join(", ", map { $_->[0] } @failed) . " failed" if @failed;
-
-    foreach (@l) {
-	if ($_->[0] eq "parport_pc") {
-	    #- this is a hack to make plip go
-	    foreach (@{$_->[1]}) {
-		/^irq=(\d+)/ and eval { output "/proc/parport/0/irq", $1 };
-	    }
-	} elsif ($_->[0] =~ /usb-[uo]hci/) {
-	    add_alias('usb-interface', $_->[0]);
-	    eval {
-		require fs; fs::mount('/proc/bus/usb', '/proc/bus/usb', 'usbdevfs');
-		#- ensure keyboard is working, the kernel must do the job the BIOS was doing
-		sleep 2;
-		load_multi("usbkbd", "keybdev") if detect_devices::usbKeyboards();
-	    }
-	}
-    }
-}
-
-sub read_already_loaded() {
-    foreach (cat_("/proc/modules")) {
-	my ($name) = split;
-	$conf{$name}{loaded} = 1;
-	when_load($name, $drivers{$name}{type});
-    }
-}
-
-sub load_deps($) {
-    my ($file) = @_;
-
-    local *F; open F, $file or log::l("error opening $file: $!"), return 0;
-    local $_;
-    while (<F>) {
-	my ($f, $deps) = split ':';
-	push @{$deps{$f}}, split ' ', $deps;
-    }
-}
-
-sub read_conf {
-    my ($file) = @_;
-    my %c;
-
-    foreach (cat_($file)) {
-	next if /^\s*#/;
-	my ($type, $alias, $val) = split(/\s+/, chomp_($_), 3) or next;
-
-	if ($type eq 'probeall') {
-	    $c{$alias}{$type} = [ split ' ', $val ];
-	} else {
-	    $c{$alias}{$type} = $val;
-	}
-    }
-    #- cheating here: not handling aliases of aliases
-    while (my ($k, $v) = each %c) {
-	if (my $a = $v->{alias}) {
-	    local $c{$a}{alias};
-	    add2hash($c{$a}, $v);
-	}
-    }
-    #- convert old scsi_hostadapter's to new probeall
-    while (my ($alias, $type) = each %c) {
-	$alias =~ /^scsi_hostadapter/ && $type->{alias} or next;
-	push @{$c{scsi_hostadapter}{probeall} ||= []}, delete $type->{alias};
-    }
-
-    \%c;
-}
-
-sub mergein_conf {
-    my ($file) = @_;
-    my $modconfref = read_conf($file);
-    while (my ($key, $value) = each %$modconfref) {
-	$conf{$key}{alias} = $value->{alias} if !exists $conf{$key}{alias};
-	push @{$conf{$key}{probeall} ||= []}, deref($value->{probeall});
-    }
-}
-
-sub write_conf {
-    my ($prefix) = @_;
-
-    my $file = "$prefix/etc/modules.conf";
-    rename "$prefix/etc/conf.modules", $file; #- make the switch to new name if needed
-
-    #- Substitute new aliases in modules.conf (if config has changed)
-    substInFile {
-	my ($type,$alias,$module) = split(/\s+/, chomp_($_), 3);
-	if ($type eq 'post-install' && $alias eq 'supermount') {	    
-	    #- remove the post-install supermount stuff.
-	    $_ = '';
-	} elsif ($type eq 'alias' && $alias =~ /scsi_hostadapter/) {
-	    #- remove old alias scsi_hostadapter's which are replaced by probeall
-	    $_ = '';
-	} elsif ($type ne "loaded" &&
-	    $conf{$alias}{$type}  &&
-	    $conf{$alias}{$type} ne $module)  {
-	    my $v = join(' ', uniq(deref($conf{$alias}{$type})));
-	    $_ = "$type $alias $v\n";
-	}
-    } $file;
-
-    my $written = read_conf($file);
-
-    local *F;
-    open F, ">> $file" or die("cannot write module config file $file: $!\n");
-    while (my ($mod, $h) = each %conf) {
-	while (my ($type, $v) = each %$h) {
-	    my $v2 = join(' ', uniq(deref($v)));
-	    print F "$type $mod $v2\n" 
-	      if $v2 && $type ne "loaded" && !$written->{$mod}{$type};
-	}
-    }
-    my @l = ();
-    push @l, 'scsi_hostadapter' if !is_empty_array_ref($conf{scsi_hostadapter}{probeall});
-    push @l, 'ide-floppy' if detect_devices::ide_zips();
-    push @l, 'bttv' if grep { $_->{driver} eq 'bttv' } detect_devices::probeall();
-    my $l = join '|', map { '^\s*'.$_.'\s*$' } @l;
-    log::l("to put in modules ", join(", ", @l));
-
-    substInFile { 
-	$_ = '' if $l && /$l/;
-	$_ .= join '', map { "$_\n" } @l if eof;
-    } "$prefix/etc/modules";
-}
-
-sub read_stage1_conf {
-    mergein_conf($_[0]);
-
-    if (arch() =~ /sparc/) {
-    } elsif (arch() =~ /ppc/) {
-	$conf{pcmcia_core}{"pre-install"} ||= "CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start";    	
-    } else {
-	$conf{pcmcia_core}{"pre-install"} ||= "CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start";
-    }
-}
-
-sub load_thiskind {
-    my ($type, $f) = @_;
-
-    #- get_that_type returns the PCMCIA cards. It doesn't know they are already
-    #- loaded, so:
-    read_already_loaded();
-
-    my @try_modules = (
-      if_($type =~ /scsi/,
-	  if_(arch() !~ /ppc/, 'imm', 'ppa'),
-	  if_(detect_devices::usbStorage(), 'usb-storage'),
-      ),
-      if_(arch() =~ /ppc/, 
-	  if_($type =~ /scsi/, 'mesh', 'mac53c94'),
-	  if_($type =~ /net/, 'bmac', 'gmac', 'mace'),
-	  if_($type =~ /sound/, 'dmasound_awacs'),
-      ),
-    );
-    grep {
-	$f->($_->{description}, $_->{driver}) if $f;
-	eval { load($_->{driver}, $type, $_->{options}) };
-	$_->{error} = $@;
-
-	!($@ && $_->{try});
-    } get_that_type($type), 
-      map {; { driver => $_, description => $_, try => 1 } } @try_modules;
-}
-
-sub get_that_type {
-    my ($type) = @_;
-
-    grep {
-	if ($type eq 'isdn') {
-	    my $b = $_->{driver} =~ /ISDN:([^,]*),?([^,]*),?(.*)/;
-	    if ($b) {
-		$_->{driver} = $1;
-		$_->{options} = $2;
-		$_->{firmware} = $3;
-		$_->{firmware} =~ s/firmware=//;
-		$_->{driver} eq "hisax" and $_->{options} .= " id=HiSax";
-	    }
-	    $b;
-	} else {
-		my $l = $drivers{$_->{driver}};
-		($_->{type} =~ /$type/ || $l && $l->{type} =~ /$type/) && detect_devices::check($_);
-	}
-    } detect_devices::probeall('');
-}
-
-sub load_ide {
-    if (1) { #- add it back to support Ultra66 on ide modules.
-	eval { load("ide-cd"); }
-    } else {
-	eval {
-	    load("ide-mod", 'prereq', 'options="' . detect_devices::hasUltra66() . '"');
-	    delete $conf{"ide-mod"}{options};
-	    load_multi(qw(ide-probe ide-probe-mod ide-disk ide-cd));
-	}
-    }
-}
-
-sub configure_pcmcia {
-    my ($pcic) = @_;
-
-    #- try to setup pcmcia if cardmgr is not running.
-    my $running if 0;
-    return if $running;
-    $running = 1;
-
-    log::l("i try to configure pcmcia services");
-
-    symlink "/tmp/stage2/$_", $_ foreach "/etc/pcmcia";
-
-    eval {
-	load("pcmcia_core");
-	load($pcic);
-	load("ds");
-    };
-
-    #- run cardmgr in foreground while it is configuring the card.
-    run_program::run("cardmgr-" . c::kernel_version(), "-f", "-m" ,"/modules");
-    sleep(3);
-    
-    #- make sure to be aware of loaded module by cardmgr.
-    read_already_loaded();
-}
-
-sub write_pcmcia {
-    my ($prefix, $pcmcia) = @_;
-
-    #- should be set after installing the package above otherwise the file will be renamed.
-    setVarsInSh("$prefix/etc/sysconfig/pcmcia", {
-	PCMCIA    => bool2yesno($pcmcia),
-	PCIC      => $pcmcia,
-	PCIC_OPTS => "",
-        CORE_OPTS => "",
-    });
-}
-
-
-
-1;
diff --git a/perl-install/mouse.pm b/perl-install/mouse.pm
deleted file mode 100644
index d6778b902..000000000
--- a/perl-install/mouse.pm
+++ /dev/null
@@ -1,548 +0,0 @@
-package mouse; # $Id$
-
-#use diagnostics;
-#use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use modules;
-use detect_devices;
-use run_program;
-use devices;
-use modules;
-use any;
-use log;
-
-my @mouses_fields = qw(nbuttons MOUSETYPE XMOUSETYPE name);
-
-my %mice = 
- arch() =~ /^sparc/ ? 
-(
- 'sunmouse' =>
- [ [ 'sunmouse' ],
-   [ [ 3, 'sun', 'sun', __("Sun - Mouse") ]
-   ]]
-) :
-(
- 'PS/2' => 
- [ [ 'psaux' ],
-   [ [ 2, 'ps/2', 'PS/2', __("Standard") ],
-     [ 5, 'ps/2', 'MouseManPlusPS/2', __("Logitech MouseMan+") ],
-     [ 5, 'imps2', 'IMPS/2', __("Generic PS2 Wheel Mouse") ],
-     [ 5, 'ps/2', 'GlidePointPS/2', __("GlidePoint") ],
-     '',
-     [ 5, 'ps/2', 'ThinkingMousePS/2', __("Kensington Thinking Mouse") ],
-     [ 5, 'netmouse', 'NetMousePS/2', __("Genius NetMouse") ],
-     [ 5, 'netmouse', 'NetScrollPS/2', __("Genius NetScroll") ],
-   ]],
-     
- 'USB' =>
- [ [ 'usbmouse' ],
-   [ if_(arch() eq 'ppc', [ 1, 'ps/2', 'PS/2', __("1 button") ]),
-     [ 2, 'ps/2', 'PS/2', __("Generic") ],
-     [ 5, 'ps/2', 'IMPS/2', __("Wheel") ],
-   ]],
-
- __("serial") =>
- [ [ map { "ttyS$_" } 0..3 ],
-   [ [ 2, 'Microsoft', 'Microsoft', __("Generic 2 Button Mouse") ],
-     [ 3, 'Microsoft', 'Microsoft', __("Generic 3 Button Mouse") ],
-     [ 5, 'ms3', 'IntelliMouse', __("Microsoft IntelliMouse") ],
-     [ 3, 'MouseMan', 'MouseMan', __("Logitech MouseMan") ],
-     [ 2, 'MouseSystems', 'MouseSystems', __("Mouse Systems") ],     
-     '',
-     [ 3, 'logim', 'MouseMan', __("Logitech CC Series") ],
-     [ 5, 'pnp', 'IntelliMouse', __("Logitech MouseMan+/FirstMouse+") ],
-     [ 5, 'ms3', 'IntelliMouse', __("Genius NetMouse") ],
-     [ 2, 'MMSeries', 'MMSeries', __("MM Series") ],
-     [ 2, 'MMHitTab', 'MMHittab', __("MM HitTablet") ],
-     [ 3, 'Logitech', 'Logitech', __("Logitech Mouse (serial, old C7 type)") ],
-     [ 3, 'Microsoft', 'ThinkingMouse', __("Kensington Thinking Mouse") ],
-   ]],
-
- __("busmouse") =>
- [ [ arch() eq 'ppc' ? 'adbmouse' : ('atibm', 'inportbm', 'logibm') ],
-   [ if_(arch() eq 'ppc', [ 1, 'Busmouse', 'BusMouse', __("1 button") ]),
-     [ 2, 'Busmouse', 'BusMouse', __("2 buttons") ],
-     [ 3, 'Busmouse', 'BusMouse', __("3 buttons") ],
-   ]],
-
- __("none") =>
- [ [ 'none' ],
-   [ [ 0, 'none', 'Microsoft', __("No mouse") ],
-   ]],
-);
-
-
-sub xmouse2xId { 
-    #- xmousetypes must be sorted as found in /usr/include/X11/extensions/xf86misc.h
-    #- so that first mean "0", etc
-    my @xmousetypes = (
-		   "Microsoft",
-		   "MouseSystems",
-		   "MMSeries",
-		   "Logitech",
-		   "BusMouse", #MouseMan,
-		   "Logitech",
-		   "PS/2",
-		   "MMHittab",
-		   "GlidePoint",
-		   "IntelliMouse",
-		   "ThinkingMouse",
-		   "IMPS/2",
-		   "ThinkingMousePS/2",
-		   "MouseManPlusPS/2",
-		   "GlidePointPS/2",
-		   "NetMousePS/2",
-		   "NetScrollPS/2",
-		   "SysMouse",
-		   "Auto",
-		   "AceCad",
-		   "WSMouse",
-		   "USB",
-    );
-    my ($id) = @_;
-    $id = 'BusMouse' if $id eq 'MouseMan';
-    my $i; map_index { $_ eq $id and $i = $::i } @xmousetypes; $i;
-}
-
-my %mouse_btn_keymap = (
-    0   => "NONE",
-    67  => "F9",
-    68  => "F10",
-    87  => "F11",
-    88  => "F12",
-    85  => "F13",
-    89  => "F14",
-    90  => "F15",
-    56  => "L-Option/Alt",
-    125 => "L-Command",
-    98  => "Num: /",
-    55  => "Num: *",
-    117 => "Num: =",
-);
-sub ppc_one_button_keys { keys %mouse_btn_keymap }
-sub ppc_one_button_key2text { $mouse_btn_keymap{$_[0]} }
-
-sub raw2mouse {
-    my ($type, $raw) = @_;
-    $raw or return;
-
-    my %l; @l{@mouses_fields} = @$raw;
-    +{ %l, type => $type };
-}
-
-sub update_type_name {
-    my ($mouse) = @_;
-    while (my ($k, $v) = each %mice) {
-	$mouse->{device} =~ /usb/ && $k ne 'USB' and next; #- avoid mixing USB and PS/2 mice.
-	foreach (@{$v->[1]}) {
-	    if ($_->[0] == $mouse->{nbuttons} && $_->[2] eq $mouse->{XMOUSETYPE}) {
-		add2hash($mouse, { MOUSETYPE => $_->[1],
-				   type      => $k,
-				   name      => $_->[3],
-				 });
-		return $mouse;
-	    }
-	}
-    }
-}
-
-sub fullnames { 
-    map_each { 
-	my $type = $::a;
-	grep {$_} map {
-	    if ($_) {
-		my $l = raw2mouse($type, $_);
-		"$type|$l->{name}";
-	    } else { 
-		$type .= "|[" . _("Other") . "]";
-		'';
-	    }
-	} @{$::b->[1]}
-    } %mice;
-}
-
-sub fullname2mouse {
-    my ($fname, %opts) = @_;
-    my ($type, @l) = split '\|', $fname;
-    my ($name) = pop @l;
-    $opts{device} ||= $mice{$type}[0][0];
-    foreach (@{$mice{$type}[1]}) {
-	my $l = raw2mouse($type, $_);
-	$name eq $l->{name} and return { %$l, %opts };
-    }
-    die "$fname not found ($type, $name)";
-}
-
-sub serial_ports() { map { "ttyS$_" } 0..7 }
-sub serial_port2text {
-    $_[0] =~ /ttyS(\d+)/ ? "$_[0] / COM" . ($1 + 1) : $_[0];
-}
-
-sub read {
-    my ($prefix) = @_;
-    my %mouse = getVarsFromSh "$prefix/etc/sysconfig/mouse";
-    eval { add2hash_(\%mouse, fullname2mouse($mouse{FULLNAME})) };
-    $mouse{device} = readlink "$prefix/dev/mouse" or log::l("reading $prefix/dev/mouse symlink failed");
-    $mouse{nbuttons} = $mouse{XEMU3} eq "yes" ? 2 : $mouse{WHEEL} eq "yes" ? 5 : 3;
-    \%mouse;
-}
-
-sub write {
-    my ($prefix, $mouse) = @_;
-    local $mouse->{FULLNAME} = qq("$mouse->{type}|$mouse->{name}"); #-"
-    local $mouse->{XEMU3} = bool2yesno($mouse->{nbuttons} < 3);
-    local $mouse->{WHEEL} = bool2yesno($mouse->{nbuttons} > 3);
-    setVarsInSh("$prefix/etc/sysconfig/mouse", $mouse, qw(MOUSETYPE XMOUSETYPE FULLNAME XEMU3 WHEEL device));
-    any::devfssymlinkf ($mouse->{device}, 'mouse', $prefix) or log::l("creating $prefix/dev/mouse symlink failed");
-    $mouse->{auxmouse} and any::devfssymlinkf ($mouse->{auxmouse}{device}, 'mouse1', $prefix) or log::l("creating $prefix/dev/mouse1 symlink failed");
-
-    if (arch() =~ /ppc/) {
-	my $s = join('',
-	  "dev.mac_hid.mouse_button_emulation = " . to_bool($mouse->{button2_key} || $mouse->{button3_key}) . "\n",
-	  if_($mouse->{button2_key}, "dev.mac_hid.mouse_button2_keycode = $mouse->{button2_key}\n"),
-	  if_($mouse->{button3_key}, "dev.mac_hid.mouse_button3_keycode = $mouse->{button3_key}\n"),
-	);
-	substInFile { 
-	    $_ = '' if /^\Qdev.mac_hid.mouse_button/;
-	    $_ .= $s if eof;
-	} "$prefix/etc/sysctl.conf";
-	#- hack - dev RPM symlinks to mouse0 - lands on mouse1 with new input layer on PPC input/mice will get both ADB and USB
-	symlinkf "/dev/input/mice", "$prefix/dev/usbmouse" if ($mouse->{device} eq "usbmouse");    
-    }
-}
-
-sub mouseconfig {
-    my ($t, $mouse, @wacom);
-
-    #- Whouah! probing all devices from ttyS0 to ttyS3 once a time!
-    detect_devices::probeSerialDevices();
-
-    #- check new probing methods keep everything used here intact!
-    foreach (0..3) {
-	$t = detect_devices::probeSerial("/dev/ttyS$_");
-	if ($t->{CLASS} eq 'MOUSE') {
-	    $t->{MFG} ||= $t->{MANUFACTURER};
-
-	    $mouse = fullname2mouse("serial|Microsoft IntelliMouse") if $t->{MFG} eq 'MSH' && $t->{MODEL} eq '0001';
-	    $mouse = fullname2mouse("serial|Logitech MouseMan") if $t->{MFG} eq 'LGI' && $t->{MODEL} =~ /^80/;
-	    $mouse = fullname2mouse("serial|Genius NetMouse") if $t->{MFG} eq 'KYE' && $t->{MODEL} eq '0003';
-
-	    $mouse ||= fullname2mouse("serial|Generic 2 Button Mouse"); #- generic by default.
-	    $mouse->{device} = "ttyS$_";
-	    last;
-	} elsif ($t->{CLASS} eq "PEN" || $t->{MANUFACTURER} eq "WAC") {
-	    push @wacom, "ttyS$_";
-	}
-    }
-    $mouse, @wacom;
-}
-
-sub detect() {
-    if (arch() =~ /^sparc/) {
-	return fullname2mouse("sunmouse|Sun - Mouse");
-    }
-    if (arch() eq "ppc") {
-        return fullname2mouse(detect_devices::hasMousePS2("usbmouse") ? 
-			      "USB|1 button" :
-			      # No need to search for an ADB mouse.  If I did, the PPC kernel would
-			      # find one whether or not I had one installed!  So..  default to it.
-			      "busmouse|1 button");
-    }
-
-    my @wacom;
-    my $fast_mouse_probe = sub {
-	my $auxmouse = detect_devices::hasMousePS2("psaux") && fullname2mouse("PS/2|Standard", unsafe => 1);
-
-	if (modules::get_alias("usb-interface")) {
-	    if (my (@l) = detect_devices::usbMice()) {
-		log::l("found usb mouse $_->{driver} $_->{description} ($_->{type})") foreach @l;
-		eval { modules::load($_) foreach qw(hid mousedev usbmouse) };
-		if (!$@ && detect_devices::tryOpen("usbmouse")) {
-		    my $mouse = fullname2mouse($l[0]{driver} =~ /Mouse:(.*)/ ? $1 : "USB|Generic");
-		    $auxmouse and $mouse->{auxmouse} = $auxmouse; #- for laptop, we kept the PS/2 as secondary (symbolic).
-		    return $mouse;
-		}
-		eval { modules::unload($_) foreach qw(usbmouse mousedev hid) };
-	    }
-	}
-	$auxmouse;
-    };
-
-    if (modules::get_alias("usb-interface")) {
-	my $keep_mouse;
-	if (my (@l) = detect_devices::usbWacom()) {
-	    log::l("found usb wacom $_->{driver} $_->{description} ($_->{type})") foreach @l;
-	    eval { modules::load("wacom"); modules::load("evdev"); };
-	    unless ($@) {
-		foreach (0..$#l) {
-		    detect_devices::tryOpen("input/event$_") and $keep_mouse = 1, push @wacom, "input/event$_";
-		}
-	    }
-	    $keep_mouse or eval { modules::unload("evdev"); modules::unload("wacom"); };
-	}
-    }
-
-    #- at this level, not all possible mice are detected so avoid invoking serial_probe
-    #- which takes a while for its probe.
-    if ($::isStandalone) {
-	my $mouse = $fast_mouse_probe->();
-	$mouse and return ($mouse, @wacom);
-    }
-
-    #- probe serial device to make sure a wacom has been detected.
-    eval { modules::load("serial") };
-    my ($r, @serial_wacom) = mouseconfig(); push @wacom, @serial_wacom;
-
-    if (!$::isStandalone) {
-	my $mouse = $fast_mouse_probe->();
-	$r && $mouse and $r->{auxmouse} = $mouse; #- we kept the auxilliary mouse as PS/2.
-	$r and return ($r, @wacom);
-	$mouse and return ($mouse, @wacom);
-    } else {
-	$r and return ($r, @wacom);
-    }
-
-    #- in case only a wacom has been found, assume an inexistant mouse (necessary).
-    @wacom and return { CLASS      => 'MOUSE',
-			nbuttons   => 2,
-			device     => "nothing",
-			MOUSETYPE  => "Microsoft",
-			XMOUSETYPE => "Microsoft"}, @wacom;
-
-    #- defaults to generic serial mouse on ttyS0.
-    #- Oops? using return let return a hash ref, if not using it, it return a list directly :-)
-    return fullname2mouse("serial|Generic 2 Button Mouse", unsafe => 1);
-}
-
-#- write_conf : write the mouse infos into the Xconfig files.
-#- input :
-#-  $mouse : the hashtable containing the informations
-#- $mouse input
-#-  $mouse->{nbuttons} : number of buttons : integer
-#-  $mouse->{device} : device of the mouse : string : ex 'psaux'
-#-  $mouse->{XMOUSETYPE} : type of the mouse for gpm : string : ex 'PS/2'
-#-  $mouse->{type} : type (generic ?) of the mouse : string : ex 'PS/2'
-#-  $mouse->{name} : name of the mouse : string : ex 'Standard'
-#-  $mouse->{MOUSETYPE} : type of the mouse : string : ex "ps/2"
-#-  $mouse->{XEMU3} : emulate 3rd button : string : 'yes' or 'no'
-sub write_conf {
-    my ($mouse) = @_;
-
-    &write('', $mouse);
-    modules::write_conf('') if $mouse->{device} eq "usbmouse" && !$::testing;
-
-    my $f = "/etc/X11/XF86Config";
-    my $g = "/etc/X11/XF86Config-4";
-
-    my $update_mouse = sub {
-	my ($mouse) = @_;
-
-	my ($zaxis, $zaxis_aux) = map { [
-					 $_->{nbuttons} > 3 ? [ "ZAxisMapping", "4 5" ] : (),
-					 $_->{nbuttons} > 5 ? [ "ZAxisMapping", "6 7" ] : (),
-					 $_->{nbuttons} < 3 ? ([ "Emulate3Buttons" ], [ "Emulate3Timeout", "50" ]) : ()
-					] } grep { $_ } ($mouse, $mouse->{auxmouse});
-
-	my ($str_zaxis, $str_zaxis_aux) = map { join('', map { qq(\n    $_->[0]) . ($_->[1] && qq( $_->[1])) } @$_)
-					    } grep { $_ } ($zaxis, $zaxis_aux);
-	my $found_auxmouse = 0;
-	substInFile {
-	    if (/^Section\s+"Pointer"/ .. /^EndSection/) {
-		$_ = '' if /(ZAxisMapping|Emulate3)/; #- remove existing line
-		s|^(\s*Protocol\s+).*|$1"$mouse->{XMOUSETYPE}"|;
-		s|^(\s*Device\s+).*|$1"/dev/$mouse->{device}"$str_zaxis|;
-	    }
-	    if ($mouse->{auxmouse}) {
-		if (/DeviceName\s+"Mouse2"/ .. /^EndSection/) {
-		    $found_auxmouse = 1;
-		    $_ = '' if /(ZAxisMapping|Emulate3|AlwaysCore)/; #- remove existing line
-		    s|^(\s*Protocol\s+).*|$1"$mouse->{auxmouse}{XMOUSETYPE}"|;
-		    s|^(\s*Device\s+).*|$1"/dev/$mouse->{auxmouse}{device}"\n        AlwaysCore$str_zaxis_aux|;
-		}
-	    }
-	} $f if -e $f && !$::testing;
-	substInFile {
-	    if (my $l = /^Section\s+"Pointer"/ .. /^EndSection/) {
-		$l =~ /E/ and $_ .= qq(
-
-Section "XInput"
-    SubSection "Mouse"
-        DeviceName "Mouse2"
-        Protocol   "$mouse->{auxmouse}{XMOUSETYPE}"
-        Device     "/dev/$mouse->{auxmouse}{device}"
-        AlwaysCore$str_zaxis_aux
-    EndSubSection
-EndSection
-);
-	    }
-	} $f if !$found_auxmouse && $mouse->{auxmouse} && -e $f && !$::testing;
-
-	($str_zaxis, $str_zaxis_aux) = map { join('', map { qq(\n    Option "$_->[0]") . ($_->[1] && qq( "$_->[1]")) } @$_)
-					 } grep { $_ } ($zaxis, $zaxis_aux);
-	$found_auxmouse = 0;
-	substInFile {
-	    if (/Identifier\s+"Mouse1"/ .. /^EndSection/) {
-		$_ = '' if /(ZAxisMapping|Emulate3)/; #- remove existing line
-		s|^(\s*Option\s+"Protocol"\s+).*|$1"$mouse->{XMOUSETYPE}"|; #"
-		s|^(\s*Option\s+"Device"\s+).*|$1"/dev/mouse"$str_zaxis|;
-	    }
-	    if ($mouse->{auxmouse}) {
-		if (/Identifier\s+"Mouse2"/ .. /^EndSection/) {
-		    $found_auxmouse = 1;
-		    $_ = '' if /(ZAxisMapping|Emulate3)/; #- remove existing line
-		    s|^(\s*Option\s+"Protocol"\s+).*|$1"$mouse->{auxmouse}{XMOUSETYPE}"|; #"
-		    s|^(\s*Option\s+"Device"\s+).*|$1"/dev/$mouse->{auxmouse}{device}"$str_zaxis_aux|; #"
-		}
-	    }
-	} $g if -e $g && !$::testing;
-	substInFile {
-	    if (my $l = /Identifier\s+"Mouse1"/ .. /^EndSection/) {
-		$l =~ /E/ and $_ .= qq(
-
-Section "InputDevice"
-    Identifier "Mouse2"
-    Option     "Protocol" "$mouse->{auxmouse}{XMOUSETYPE}"
-    Option     "Device"   "/dev/$mouse->{auxmouse}{XMOUSETYPE}"$str_zaxis_aux
-EndSection
-);
-	    }
-	} $g if !$found_auxmouse && $mouse->{auxmouse} && -e $g && !$::testing;
-    };
-    $update_mouse->($mouse);
-}
-
-sub test_mouse_install {
-    my ($mouse) = @_;
-    require my_gtk;
-    my_gtk->import(qw(:wrappers :helpers));
-    my $w = my_gtk->new;
-    my ($width, $height, $offset) = (210, round_up(min(350, $::windowheight - 150), 6), 25);
-    my $darea = new Gtk::DrawingArea;
-    $darea->set_events([ 'button_press_mask', 'button_release_mask' ]);  #$darea must be unrealized.
-    gtkadd($w->{window},
-  	   gtkpack(my $vbox_grab = new Gtk::VBox(0,0),
-		   gtksize(gtkset_usize($darea, $width+1, $height+1), $width+1, $height+1),
-		   my $okcancel = gtkset_sensitive(create_okcancel($w, '', '', "edge"), 1)
-		  ),
-	  );
-    $okcancel->set_uposition(7, $height-43);
-    Gtk->timeout_add(2000, sub { gtkset_sensitive($okcancel, 1); $okcancel->draw(undef); });
-    test_mouse($mouse, $w, $darea, $width, $height);
-    $w->{window}->set_usize(undef, $height+10);
-    $w->sync; # HACK
-    Gtk::Gdk->pointer_grab($darea->window, 1,
-			   [ 'pointer_motion_mask'],
-			   $darea->window, undef ,0);
-    $w->main;
-}
-
-sub test_mouse_standalone {
-    my ($mouse, $hbox) = @_;
-    require my_gtk;
-    my_gtk->import(qw(:wrappers));
-    my ($width, $height, $offset) = (210, round_up(min(350, $::windowheight - 150), 6), 25);
-    my $darea = new Gtk::DrawingArea;
-    $darea->set_events([ 'button_press_mask', 'button_release_mask' ]);  #$darea must be unrealized.
-    gtkpack($hbox,
-	    gtkpack(gtkset_border_width(new Gtk::VBox(0,10), 10),
-		    gtksize(gtkset_usize($darea, $width+1, $height+1), $width, $height)
-		   )
-	   );
-    test_mouse($mouse, $hbox, $darea, $width, $height);
-}
-
-sub test_mouse {
-    my ($mouse, $w, $darea, $width, $height) = @_;
-
-    $darea->realize();
-    my $wait = 0;
-    my ($m3_image, $m3_mask) = gtkcreate_xpm($darea, 'mouse_3b.xpm');
-    my ($m3_imagep, $m3_maskp) = gtkcreate_xpm($darea, 'mouse_3b+.xpm');
-    my ($m3_left, $m3_left_mask) = gtkcreate_xpm($darea, 'mouse_left.xpm');
-    my ($m3_right, $m3_right_mask) = gtkcreate_xpm($darea, 'mouse_right.xpm');
-    my ($m3_middle, $m3_middle_mask) = gtkcreate_xpm($darea, 'mouse_middle.xpm');
-    my ($aru, $aru_mask) = gtkcreate_xpm($darea, 'arrow_up.xpm');
-    my ($ard, $ard_mask) = gtkcreate_xpm($darea, 'arrow_down.xpm');
-    my $image = $m3_image;
-    $mouse->{nbuttons} > 3 and $image = $m3_imagep;
-    my $draw_text = sub {
-  	my ($t, $y) = @_;
-  	my $font = $darea->style->font;
-  	my $w = $font->string_width($t);
-  	$darea->window->draw_string($font, $darea->style->black_gc, ($darea->allocation->[2]-$width)/2 + ($width - $w) / 2, ($darea->allocation->[3]-$height)/2 + $y, $t);
-    };
-    my $drawarea; $drawarea = sub { $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-								 $image, 0, 0,
-								 ($darea->allocation->[2]-$width)/2, ($darea->allocation->[3]-$height)/2,
-								 210, 350);
-				    $draw_text->(_("Please test the mouse"), $height - 120);
-				    $draw_text->(_("To activate the mouse,"), $height - 105) if $mouse->{XMOUSETYPE} eq 'IMPS/2';
-				    $draw_text->(_("MOVE YOUR WHEEL!"), $height - 90) if $mouse->{XMOUSETYPE} eq 'IMPS/2';
-				    return if $::isStandalone;
-				    $darea->window->draw_rectangle($darea->style->bg_gc('normal'), 1, 0, $height-65, $width, $height);
-				};
-
-    my $paintButton = sub {
-	my ($nb, $pressed) = @_;
-	my $x = 60 + $nb*33;
-	$drawarea->();
-	if ($nb == 0) {
-	    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					 $m3_left, 0, 0,
-					 ($darea->allocation->[2]-$width)/2+31, ($darea->allocation->[3]-$height)/2 + 52,
-					 59, 91);
-	} elsif ($nb == 2) {
-	    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					 $m3_right, 0, 0,
-					 ($darea->allocation->[2]-$width)/2+117, ($darea->allocation->[3]-$height)/2 + 52,
-					 61, 91);
-	} elsif ($nb == 1) {
-	    if ($mouse->{nbuttons} > 3) {
-		$darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					     $m3_middle, 0, 0,
-					     ($darea->allocation->[2]-$width)/2+98, ($darea->allocation->[3]-$height)/2 + 67,
-					     13, 62);
-	    } else {
-  		$darea->window->draw_arc ( $darea->style->black_gc,
-  					   1, ($darea->allocation->[2]-$width)/2 + $x, ($darea->allocation->[3]-$height)/2 + 90, 20, 25,
-  					   0, 360*64);
-	    }
-	} elsif ($nb == 3) {
-	    $wait=1;
-	    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					 $aru, 0, 0,
-					 ($darea->allocation->[2]-$width)/2+102, ($darea->allocation->[3]-$height)/2 + 57,
-					 6, 8);
-	    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					 $m3_middle, 0, 0,
-					 ($darea->allocation->[2]-$width)/2+98, ($darea->allocation->[3]-$height)/2 + 67,
-					 13, 62);
-	    Gtk->timeout_add(200, sub { $wait = 0 });
-	} elsif ($nb == 4) {
-	    $wait=1;
-	    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					 $ard, 0, 0,
-					 ($darea->allocation->[2]-$width)/2+102, ($darea->allocation->[3]-$height)/2 + 131,
-					 6, 8);
-	    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					 $m3_middle, 0, 0,
-					 ($darea->allocation->[2]-$width)/2+98, ($darea->allocation->[3]-$height)/2 + 67,
-					 13, 62);
-	    Gtk->timeout_add(200, sub { $wait = 0 });
-	}
-    };
-    $darea->signal_connect(button_press_event => sub {
-  			       my $b = $_[1]{button};
-			       $paintButton->($b - 1);
-  			   });
-    $darea->signal_connect(button_release_event => sub {
-			       while ($wait) { my_gtk::flush() }
-			       $drawarea->()
-  			   });
-    $darea->signal_connect(expose_event => sub { $drawarea->() });
-    $darea->size($width, $height);
-}
diff --git a/perl-install/my_gtk.pm b/perl-install/my_gtk.pm
deleted file mode 100644
index acdbe9977..000000000
--- a/perl-install/my_gtk.pm
+++ /dev/null
@@ -1,783 +0,0 @@
- #-########################################################################
-#- Pixel's implementation of Perl-GTK  :-)  [DDX]
-#-########################################################################
-package my_gtk; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA %EXPORT_TAGS @EXPORT_OK $border);
-
-@ISA = qw(Exporter);
-%EXPORT_TAGS = (
-    helpers => [ qw(create_okcancel createScrolledWindow create_menu create_notebook create_packtable create_hbox create_vbox create_adjustment create_box_with_title create_treeitem) ],
-    wrappers => [ qw(gtksignal_connect gtkradio gtkpack gtkpack_ gtkpack__ gtkpack2 gtkpack3 gtkpack2_ gtkpack2__ gtkset_editable gtksetstyle gtkset_tip gtkappenditems gtkappend gtkset_shadow_type gtkset_layout gtkset_relief gtkadd gtkput gtktext_insert gtkset_usize gtksize gtkset_justify gtkset_active gtkset_sensitive gtkset_modal gtkset_border_width gtkmove gtkshow gtkhide gtkdestroy gtkset_mousecursor gtkset_mousecursor_normal gtkset_mousecursor_wait gtkset_background gtkset_default_fontset gtkctree_children gtkxpm gtkpng write_on_pixmap gtkcreate_xpm gtkcreate_png gtkbuttonset) ],
-    ask => [ qw(ask_warn ask_okcancel ask_yesorno ask_from_entry) ],
-);
-$EXPORT_TAGS{all} = [ map { @$_ } values %EXPORT_TAGS ];
-@EXPORT_OK = map { @$_ } values %EXPORT_TAGS;
-
-use Gtk;
-use Gtk::Gdk::ImlibImage;
-use c;
-use log;
-use common;
-
-my $forgetTime = 1000; #- in milli-seconds
-$border = 5;
-
-#-###############################################################################
-#- OO stuff
-#-###############################################################################
-sub new {
-    my ($type, $title, %opts) = @_;
-
-    Gtk->init;
-    Gtk::Gdk::ImlibImage->init;
-    Gtk->set_locale;
-    my $o = bless { %opts }, $type;
-    $o->_create_window($title);
-    while (my $e = shift @tempory::objects) { $e->destroy }
-    foreach (@interactive::objects) {
-	$_->{rwindow}->set_modal(0) if $_->{rwindow}->can('set_modal');
-    }
-    push @interactive::objects, $o if !$opts{no_interactive_objects};
-    $o->{rwindow}->set_position('center_always') if $::isStandalone;
-    $o->{rwindow}->set_modal(1) if $my_gtk::grab || $o->{grab};
-    
-    if ($::isWizard && !$my_gtk::pop_it) {
-	my $rc = "/etc/gtk/wizard.rc";
-	-r $rc or $rc = dirname(__FILE__) . "/wizard.rc";
-	Gtk::Rc->parse($rc);
-	$o->{window} = new Gtk::VBox(0,0);
-	$o->{window}->set_border_width($::Wizard_splash ? 0 : 10);
-	$o->{rwindow} = $o->{window};
-	if (!defined($::WizardWindow)) {
-	    $::WizardWindow = new Gtk::Window;
-	    $::WizardWindow->set_position('center_always');
-	    $::WizardTable = new Gtk::Table(2, 2, 0);
-	    $::WizardWindow->add($::WizardTable);
-	    my $draw1 = new Gtk::DrawingArea;
-	    $draw1->set_usize(540,100);
-	    my $draw2 = new Gtk::DrawingArea;
-	    $draw2->set_usize(100,300);
-	    my ($im_up, $mask_up) = gtkcreate_png($::Wizard_pix_up || "wiz_default_up.png");
-	    my ($y1, $x1) = $im_up->get_size;
-	    my ($im_left, $mask_left) = gtkcreate_png($::Wizard_pix_left || "wiz_default_left.png");
-	    my ($y2, $x2) = $im_left->get_size;
-	    my $style= new Gtk::Style;
-	    $style->font(Gtk::Gdk::Font->fontset_load("-adobe-times-bold-r-normal-*-25-*-100-100-p-*-iso8859-*"));
-	    my $w = $style->font->string_width($::Wizard_title);
-	    $draw1->signal_connect(expose_event => sub {
-				       my $i;
-				       for ($i=0;$i<(540/$y1);$i++) {
-					   $draw1->window->draw_pixmap ($draw1->style->bg_gc('normal'),
-									$im_up, 0, 0, 0, $y1*$i,
-									$x1 , $y1 );
-					   $draw1->window->draw_string(
-								       $style->font,
-								       $draw1->style->white_gc,
-								       140+(380-$w)/2, 62,
-								       ($::Wizard_title) );
-				       }
-				   });
-	    $draw2->signal_connect(expose_event => sub {
-				       my $i;
-				       for ($i=0;$i<(300/$y2);$i++) {
-					   $draw2->window->draw_pixmap ($draw2->style->bg_gc('normal'),
-									$im_left, 0, 0, 0, $y2*$i,
-									$x2 , $y2 );
-				       }
-				   });
-	    $::WizardTable->attach($draw1, 0, 2, 0, 1, 'fill', 'fill', 0, 0);
-	    $::WizardTable->attach($draw2, 0, 1, 1, 2, 'fill', 'fill', 0, 0);
-	    $::WizardTable->set_usize(540,400);
-	    $::WizardWindow->show_all;
-	    flush();
-	}
-	$::WizardTable->attach($o->{window}, 1, 2, 1, 2, [-fill, -expand], [-fill, -expand], 0, 0);
-    }
-
-    $::isEmbedded && !$my_gtk::pop_it or return $o;
-    $o->{window} = new Gtk::HBox(0,0);
-    $o->{rwindow} = $o->{window};
-    defined($::Plug) or $::Plug = new Gtk::Plug ($::XID);
-    $::Plug->show;
-    flush();
-    $::Plug->add($o->{window});
-    $::CCPID and kill "USR2", $::CCPID;
-    $o;
-}
-sub main {
-    my ($o, $completed, $canceled) = @_;
-    gtkset_mousecursor_normal();
-    my $timeout = Gtk->timeout_add(1000, sub { gtkset_mousecursor_normal(); 1 });
-    my $b = before_leaving { Gtk->timeout_remove($timeout) };
-    $o->{rwindow}->window->set_events(['key_press_mask', 'key_release_mask', 'exposure_mask']) if $o->{rwindow}->window;
-    $o->show;
-
-    do {
-	local $::setstep = 1;
-	Gtk->main;
-    } while ($o->{retval} ? $completed && !$completed->() : $canceled && !$canceled->());
-    $o->destroy;
-    $o->{retval}
-}
-sub show($) {
-    my ($o) = @_;
-    $o->{window}->show;
-    $o->{rwindow}->show;
-}
-sub destroy($) {
-    my ($o) = @_;
-    $o->{rwindow}->destroy;
-    gtkset_mousecursor_wait();
-    flush();
-}
-sub DESTROY { goto &destroy }
-sub sync {
-    my ($o) = @_;
-    show($o);
-    flush();
-}
-sub flush {
-    Gtk->main_iteration while Gtk->events_pending;
-}
-
-sub gtkshow($)         { $_[0]->show; $_[0] }
-sub gtkhide($)         { $_[0]->hide; $_[0] }
-sub gtkdestroy($)      { $_[0] and $_[0]->destroy }
-sub gtkset_usize($$$)  { $_[0]->set_usize($_[1],$_[2]); $_[0] }
-sub gtksize($$$)       { $_[0]->size($_[1],$_[2]); $_[0] }
-sub gtkset_justify($$) { $_[0]->set_justify($_[1]); $_[0] }
-sub gtkset_active($$)  { $_[0]->set_active($_[1]); $_[0] }
-sub gtkset_modal       { $_[0]->set_modal($_[1]); $_[0] }
-sub gtkset_sensitive   { $_[0]->set_sensitive($_[1]); $_[0] }
-sub gtkset_border_width{ $_[0]->set_border_width($_[1]); $_[0] }
-sub gtkmove { $_[0]->window->move($_[1], $_[2]); $_[0] }
-
-sub gtksignal_connect($@) {
-    my $w = shift;
-    $w->signal_connect(@_);
-    $w
-}
-
-sub gtkradio {
-    my $def = shift;
-    my $radio;
-    map { $radio = new Gtk::RadioButton($_, $radio ? $radio : ());
-	  $radio->set_active($_ eq $def); $radio } @_;
-}
-
-sub gtkpack($@) {
-    my $box = shift;
-    gtkpack_($box, map {; 1, $_ } @_);
-}
-sub gtkpack__($@) {
-    my $box = shift;
-    gtkpack_($box, map {; 0, $_ } @_);
-}
-
-sub gtkpack_($@) {
-    my $box = shift;
-    for (my $i = 0; $i < @_; $i += 2) {
-	my $l = $_[$i + 1];
-	ref $l or $l = new Gtk::Label($l);
-	$box->pack_start($l, $_[$i], 1, 0);
-	$l->show;
-    }
-    $box
-}
-sub gtkpack2($@) {
-    my $box = shift;
-    gtkpack2_($box, map {; 1, $_ } @_);
-}
-sub gtkpack2__($@) {
-    my $box = shift;
-    gtkpack2_($box, map {; 0, $_ } @_);
-}
-sub gtkpack3 {
-    my $a = shift;
-    $a && goto \&gtkpack2__;
-    goto \&gtkpack2;
-}
-sub gtkpack2_($@) {
-    my $box = shift;
-    for (my $i = 0; $i < @_; $i += 2) {
-	my $l = $_[$i + 1];
-	ref $l or $l = new Gtk::Label($l);
-	$box->pack_start($l, $_[$i], 0, 0);
-	$l->show;
-    }
-    $box
-}
-
-sub gtkset_editable {
-    my ($w, $e) = @_;
-    $w->set_editable($e);
-    $w;
-}
-
-sub gtksetstyle {
-    my ($w, $s) = @_;
-    $w->set_style($s);
-    $w;
-}
-
-sub gtkset_tip {
-    my ($tips, $w, $tip) = @_;
-    $tips->set_tip($w, $tip) if $tip;
-    $w;
-}
-
-sub gtkappenditems {
-    my $w = shift;
-    map {gtkshow($_) } @_;
-    $w->append_items(@_);
-    $w
-}
-
-sub gtkappend($@) {
-    my $w = shift;
-    foreach (@_) {
-	my $l = $_;
-	ref $l or $l = new Gtk::Label($l);
-	$w->append($l);
-	$l->show;
-    }
-    $w
-}
-
-sub gtkset_shadow_type {
-    $_[0]->set_shadow_type($_[1]);
-    $_[0];
-}
-
-sub gtkset_layout {
-    $_[0]->set_layout($_[1]);
-    $_[0];
-}
-
-sub gtkset_relief {
-    $_[0]->set_relief($_[1]);
-    $_[0];
-}
-
-sub gtkadd($@) {
-    my $w = shift;
-    foreach (@_) {
-	my $l = $_;
-	ref $l or $l = new Gtk::Label($l);
-	$w->add($l);
-	$l->show;
-    }
-    $w
-}
-sub gtkput {
-    my ($w, $w2, $x, $y) = @_;
-    $w->put($w2, $x, $y);
-    $w2->show;
-    $w
-}
-
-sub gtktext_insert {
-    my ($w, $t) = @_;
-    $w->freeze;
-    $w->backward_delete($w->get_length);
-    $w->insert(undef, undef, undef, $t); 
-    #- DEPRECATED? needs \n otherwise in case of one line text the beginning is not shown (even with the vadj->set_value)
-    $w->set_word_wrap(1);
-#-    $w->vadj->set_value(0);
-    $w->thaw;
-    $w;
-}
-
-sub gtkroot {
-    Gtk->init;
-    Gtk->set_locale;
-    Gtk::Gdk::Window->new_foreign(Gtk::Gdk->ROOT_WINDOW);
-}
-
-sub gtkcolor($$$) {
-    my ($r, $g, $b) = @_;
-
-    my $color = bless { red => $r, green => $g, blue => $b }, 'Gtk::Gdk::Color';
-    gtkroot()->get_colormap->color_alloc($color);
-}
-
-sub gtkset_mousecursor {
-    my ($type, $w) = @_;
-    ($w || gtkroot())->set_cursor(Gtk::Gdk::Cursor->new($type));
-}
-sub gtkset_mousecursor_normal { gtkset_mousecursor(68, @_) }
-sub gtkset_mousecursor_wait   { gtkset_mousecursor(150, @_) }
-
-sub gtkset_background {
-    my ($r, $g, $b) = @_;
-
-    my $root = gtkroot();
-    my $gc = Gtk::Gdk::GC->new($root);
-
-    my $color = gtkcolor($r, $g, $b);
-    $gc->set_foreground($color);
-    $root->set_background($color);
-
-    my ($h, $w) = $root->get_size;
-    $root->draw_rectangle($gc, 1, 0, 0, $w, $h);
-}
-
-sub gtkset_default_fontset {
-    my ($fontset) = @_;
-
-    my $style = Gtk::Widget->get_default_style;
-    my $f = Gtk::Gdk::Font->fontset_load($fontset) or die '';
-    $style->font($f);
-    Gtk::Widget->set_default_style($style);
-}
-
-sub gtkctree_children {
-    my ($node) = @_;
-    my @l;
-    $node or return;
-    for (my $p = $node->row->children; $p; $p = $p->row->sibling) {
-	push @l, $p;
-    }
-    @l;
-}
-
-sub gtkcreate_xpm {
-    my ($w, $f) = @_;
-    $f =~ m|.xpm$| or $f="$f.xpm";
-    if ( $f !~ /\//) { -e "$_/$f" and $f="$_/$f", last foreach $ENV{SHARE_PATH}, "$ENV{SHARE_PATH}/libDrakX/pixmaps", "pixmaps" }
-    my @l = Gtk::Gdk::Pixmap->create_from_xpm($w->window, $w->style->bg('normal'), $f) or die "gtkcreate_xpm: missing pixmap file $f";
-    @l;
-}
-sub gtkcreate_png {
-    my ($f) = @_;
-    $f =~ m|.png$| or $f="$f.png";
-    if ( $f !~ /\//) { -e "$_/$f" and $f="$_/$f", last foreach $ENV{SHARE_PATH}, "$ENV{SHARE_PATH}/icons", "$ENV{SHARE_PATH}/libDrakX/pixmaps", "pixmaps" }
-    my $im = Gtk::Gdk::ImlibImage->load_image($f) or die "gtkcreate_png: missing png file $f";
-    $im->render($im->rgb_width, $im->rgb_height);
-    ($im->move_image(), $im->move_mask);
-}
-sub gtkbuttonset {
-    my ($button, $str) = @_;
-    $button->child->destroy;
-    $button->add(gtkshow(new Gtk::Label $str));
-    $button;
-}
-
-sub xpm_d { my $w = shift; Gtk::Gdk::Pixmap->create_from_xpm_d($w->window, undef, @_) }
-sub gtkxpm { new Gtk::Pixmap(gtkcreate_xpm(@_)) }
-sub gtkpng { new Gtk::Pixmap(gtkcreate_png(@_)) }
-sub write_on_pixmap {
-    my ($pixmap, $x_pos, $y_pos, @text)=@_;
-    my ($gdkpixmap, $gdkmask) = $pixmap->get();
-    my ($width, $height) = (440, 250);
-    my $gc = Gtk::Gdk::GC->new(gtkroot());
-    $gc->set_foreground(gtkcolor(8448, 17664, 40191)); #- in hex : 33, 69, 157
-
-    my $darea= new Gtk::DrawingArea();
-    $darea->size($width, $height);
-    $darea->set_usize($width, $height);
-    my $draw = sub {
-	my $style = new Gtk::Style;
-	#- i18n : you can change the font.
-	$style->font(Gtk::Gdk::Font->fontset_load(_("-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*")));
-	my $y_pos2= $y_pos;
-  	foreach (@text) {
-  	    $darea->window->draw_string($style->font, $gc, $x_pos, $y_pos2, $_);
-  	    $y_pos2 += 20;
-  	}
-    };
-    $darea->signal_connect(expose_event => sub { $darea->window->draw_rectangle($darea->style->white_gc, 1, 0, 0, $width, $height);
-						 $darea->window->draw_pixmap
-						   ($darea->style->white_gc,
-						    $gdkpixmap, 0, 0,
-						    ($darea->allocation->[2]-$width)/2, ($darea->allocation->[3]-$height)/2,
-						    $width, $height);
-						 &$draw();
-					     });
-    $darea;
-}
-
-sub n_line_size {
-    my ($nbline, $type, $widget) = @_;
-    my $font = $widget->style->font;
-    my $spacing = ${{ text => 0, various => 17 }}{$type};
-    $nbline * ($font->ascent + $font->descent + $spacing) + 8;
-}
-
-#-###############################################################################
-#- createXXX functions
-
-#- these functions return a widget
-#-###############################################################################
-
-sub create_okcancel {
-    my ($w, $ok, $cancel, $spread, @other) = @_;
-    my $one = ($ok xor $cancel);
-    $spread ||= $::isWizard ? "end" : "spread";
-    $ok ||= $::isWizard ? ($::Wizard_finished ? _("Finish") : _("Next ->")) : _("Ok");
-    $cancel ||= $::isWizard ? _("<- Previous") : _("Cancel");
-    my $b1 = gtksignal_connect($w->{ok} = new Gtk::Button($ok), clicked => $w->{ok_clicked} || sub { $w->{retval} = 1; Gtk->main_quit });
-    my $b2 = !$one && gtksignal_connect($w->{cancel} = new Gtk::Button($cancel), clicked => $w->{cancel_clicked} || sub { log::l("default cancel_clicked"); undef $w->{retval}; Gtk->main_quit });
-    $::isWizard and gtksignal_connect($w->{wizcancel} = new Gtk::Button(_("Cancel")), clicked => sub { die 'wizcancel' });
-    my @l = grep { $_ } $::isWizard ? ($w->{wizcancel}, $::Wizard_no_previous ? () : $b2, $b1): ($b1, $b2);
-    push @l, map { gtksignal_connect(new Gtk::Button($_->[0]), clicked => $_->[1]) } @other;
-
-    $_->can_default($::isWizard) foreach @l;
-    gtkadd(create_hbox($spread), @l);
-}
-
-sub create_box_with_title($@) {
-    my $o = shift;
-
-    $o->{box_size} = sum(map { round(length($_) / 60 + 1/2) } map { split "\n" } @_);
-    $o->{box} = new Gtk::VBox(0,0);
-    $o->{icon} && !$::isWizard and eval { gtkpack__($o->{box}, gtkset_border_width(gtkpack_(new Gtk::HBox(0,0), 1, gtkpng($o->{icon})),5)); };
-    if (@_ <= 2 && $o->{box_size} > 4) {
-	my $wanted = n_line_size($o->{box_size}, 'text', $o->{box});
-	my $height = min(250, $wanted);
-	my $has_scroll = $height < $wanted;
-
-	my $wtext = new Gtk::Text;
-	$wtext->can_focus($has_scroll);
-	chomp(my $text = join("\n", @_));
-	my $scroll = createScrolledWindow(gtktext_insert($wtext, $text));
-	$scroll->set_usize(400, $height);
-	gtkpack__($o->{box}, $scroll);
-    } else {
-	my $a = !$::no_separator;
-	undef $::no_separator;
-	gtkpack__($o->{box},
-		  (map {
-		      my $w = ref $_ ? $_ : new Gtk::Label($_);
-		      $::isWizard and $w->set_justify("left");
-		      $w->set_name("Title");
-		      $w;
-		  } map { ref $_ ? $_ : warp_text($_) } @_),
-		  if_($a, new Gtk::HSeparator)
-		 );
-    }
-}
-
-sub createScrolledWindow {
-    my ($W) = @_;
-    my $w = new Gtk::ScrolledWindow(undef, undef);
-    $w->set_policy('automatic', 'automatic');
-    member(ref $W, qw(Gtk::CList Gtk::CTree Gtk::Text)) ?
-      $w->add($W) :
-      $w->add_with_viewport($W);
-    $W->can("set_focus_vadjustment") and $W->set_focus_vadjustment($w->get_vadjustment);
-    $W->show;
-    $w
-}
-
-sub create_menu($@) {
-    my $title = shift;
-    my $w = new Gtk::MenuItem($title);
-    $w->set_submenu(gtkshow(gtkappend(new Gtk::Menu, @_)));
-    $w
-}
-
-sub add2notebook {
-    my ($n, $title, $book) = @_;
-
-    my ($w1, $w2) = map { new Gtk::Label($_) } $title, $title;
-    $book->{widget_title} = $w1;
-    $n->append_page_menu($book, $w1, $w2);
-    $book->show;
-    $w1->show;
-    $w2->show;
-}
-
-sub create_notebook(@) {
-    my $n = new Gtk::Notebook;
-    add2notebook($n, splice(@_, 0, 2)) while @_;
-    $n
-}
-
-sub create_adjustment($$$) {
-    my ($val, $min, $max) = @_;
-    new Gtk::Adjustment($val, $min, $max + 1, 1, ($max - $min + 1) / 10, 1);
-}
-
-sub create_packtable($@) {
-    my ($options, @l) = @_;
-    my $w = new Gtk::Table(0, 0, $options->{homogeneous} || 0);
-    map_index {
-	my ($i, $l) = ($_[0], $_);
-	map_index {
-	    my ($j) = @_;
-	    if ($_) {
-		ref $_ or $_ = new Gtk::Label($_);
-		$j != $#$l ?
-		  $w->attach($_, $j, $j + 1, $i, $i + 1, 'fill', 'fill', 5, 0) :
-		  $w->attach($_, $j, $j + 1, $i, $i + 1, 1|4, ref($_) eq 'Gtk::ScrolledWindow' ? 1|4 : 0, 0, 0);
-		$_->show;
-	    }
-	} @$l;
-    } @l;
-    $w->set_col_spacings($options->{col_spacings} || 0);
-    $w->set_row_spacings($options->{row_spacings} || 0);
-    $w
-}
-
-sub create_hbox {
-    my $w = gtkset_border_width(new Gtk::HButtonBox, 3);
-    $w->set_layout($_[0] || "spread");
-    $w;
-}
-sub create_vbox {
-    my $w = new Gtk::VButtonBox;
-    $w->set_layout(-spread);
-    $w;
-}
-
-
-sub _create_window($$) {
-    my ($o, $title) = @_;
-    my $w = new Gtk::Window;
-    my $gc = Gtk::Gdk::GC->new(gtkroot());
-    !$::isStandalone && !$::live && !$::g_auto_install and $my_gtk::shape_width = 3;
-#-  $gc->set_foreground(gtkcolor(8448, 17664, 40191)); #- in hex : 33, 69, 157
-    $gc->set_foreground(gtkcolor(5120, 10752, 22784)); #- in hex : 20, 42, 89
-#-    $gc->set_foreground(gtkcolor(16896, 16896, 16896)); #- in hex : 66, 66, 66
-    my $inner = gtkadd(my $f_ = gtkset_shadow_type(new Gtk::Frame(undef), 'out'),
-		       my $f = gtkset_border_width(gtkset_shadow_type(new Gtk::Frame(undef), 'none'), 3)
-		      );
-    my $table;
-    if ($::isStandalone || $::live || $::g_auto_install || $::noShadow) { gtkadd($w, $inner) } else {
-	my $sqw = $my_gtk::shape_width;
-	gtkadd($w, $table = new Gtk::Table(2, 2, 0));
-	$table->attach( $inner, 0, 1, 0, 1, 1|4, 1|4, 0, 0);
-	$table->attach( gtksignal_connect(gtkset_usize(new Gtk::DrawingArea, $sqw, 1), expose_event => sub {
-					      $_[0]->window->draw_rectangle($_[0]->style->bg_gc('normal'), 1, 0, 0, $sqw, $sqw);
-					      $_[0]->window->draw_rectangle($gc, 1, 0, $sqw, $sqw, $_[0]->allocation->[3]);
-					  }),
-			1, 2, 0, 1, 'fill', 'fill', 0, 0);
-	$table->attach( gtksignal_connect(gtkset_usize(new Gtk::DrawingArea, 1, $sqw), expose_event => sub {
-					      $_[0]->window->draw_rectangle($_[0]->style->bg_gc('normal'), 1, 0, 0, $sqw, $sqw);
-					      $_[0]->window->draw_rectangle($gc, 1, $sqw, 0, $_[0]->allocation->[2], $sqw);
-					  }),
-			0, 1, 1, 2, 'fill', 'fill', 0, 0);
-	$table->attach( gtksignal_connect(gtkset_usize(new Gtk::DrawingArea, $sqw, $sqw), expose_event => sub {
-					      $_[0]->window->draw_rectangle($gc, 1, 0, 0, $sqw, $sqw);
-					  }),
-			1, 2, 1, 2, 'fill', 'fill', 0, 0);
-	$table->show_all;
-    }
-    $w->set_name("Title");
-    $w->set_title($title);
-
-    $w->signal_connect(expose_event => sub { eval { $interactive::objects[-1]{rwindow} == $w and $w->window->XSetInputFocus } }) if $my_gtk::force_focus || $o->{force_focus};
-    $w->signal_connect(delete_event => sub { $w->destroy; die 'wizcancel' });
-    $w->set_uposition(@{$my_gtk::force_position || $o->{force_position}}) if $my_gtk::force_position || $o->{force_position};
-
-    $w->signal_connect(focus => sub { Gtk->idle_add(sub { $w->ensure_focus($_[0]); 0 }, $_[1]) }) if $w->can('ensure_focus');
-
-    if ($::o->{mouse}{unsafe}) {
-	$w->set_events("pointer_motion_mask");
-	my $signal;
-	$signal = $w->signal_connect(motion_notify_event => sub {
-	    delete $::o->{mouse}{unsafe};
-	    log::l("unsetting unsafe mouse");
-	    $w->signal_disconnect($signal);
-	});
-    }
-    $w->signal_connect(key_press_event => sub {
-	my $d = ${{ 65470 => 'help',
-	            65481 => 'next',
-		    65480 => 'previous' }}{$_[1]{keyval}};
-
-	if ($d eq "help") {
-	    require install_gtk;
-	    install_gtk::create_big_help($::o);
-	} elsif (chr($_[1]{keyval}) eq 'e' && $_[1]{state} & 8) {
-	    log::l("Switching to " . ($::expert ? "beginner" : "expert"));
-	    $::expert = !$::expert;
-	} elsif ($d) {
-	    #- previous field is created here :(
-	    my $s; foreach (reverse @{$::o->{orderedSteps}}) {
-		$s->{previous} = $_ if $s;
-		$s = $::o->{steps}{$_};
-	    }
-	    $s = $::o->{step};
-	    do { $s = $::o->{steps}{$s}{$d} } until !$s || $::o->{steps}{$s}{reachable};
-	    $::setstep && $s and die "setstep $s\n";
-	}
-    });# if $::isInstall;
-
-    $w->signal_connect(size_allocate => sub {
-	my ($wi, $he) = @{$_[1]}[2,3];
-	my ($X, $Y, $Wi, $He) = @{$my_gtk::force_center || $o->{force_center}};
-        $w->set_uposition(max(0, $X + ($Wi - $wi) / 2), max(0, $Y + ($He - $he) / 2));
-
-	if (!$::isStandalone && !$::live && !$::g_auto_install) {
-	    my $sqw = $my_gtk::shape_width; #square width
-	    my $wia = int(($wi+7)/8);
-	    my $s = "\xFF" x ($wia*$he);
-	    my $wib = $wia*8;
-	    my $dif = $wib-$wi;
-	    foreach my $y (0..$sqw-1) { vec($s, $wib-1-$dif-$_+$wib*$y, 1) = 0x0 foreach (0..$sqw-1) }
-	    foreach my $y (0..$sqw-1) { vec($s, (($he-1)*$wib)-$wib*$y+$_, 1) = 0x0 foreach (0..$sqw-1) }
-	    $w->realize;
-	    my $b = Gtk::Gdk::Bitmap->create_from_data($w->window, $s, $wib, $he);
-	    $w->window->shape_combine_mask($b, 0, 0);
-	}
-    }) if ($my_gtk::force_center || $o->{force_center}) && !($my_gtk::force_position || $o->{force_position}) ;
-
-    $o->{window} = $f;
-    $o->{rwindow} = $w;
-    $table and $table->draw(undef);
-}
-
-my ($next_child, $left, $right, $up, $down);
-{
-    my $next_child = sub {
-	my ($c, $dir) = @_;
-
-	my @childs = $c->parent->children;
-   
-	my $i; for ($i = 0; $i < @childs; $i++) {
-	    last if $childs[$i] == $c || $childs[$i]->subtree == $c;
-	}
-	$i += $dir;
-	0 <= $i && $i < @childs ? $childs[$i] : undef;
-    };
-    $left = sub { &$next_child($_[0]->parent, 0); };
-    $right = sub {
-	my ($c) = @_;
-	if ($c->subtree) {
-	    $c->expand;
-	    ($c->subtree->children)[0];
-	} else {
-	    $c;
-	}
-    };
-    $down = sub {
-	my ($c) = @_;
-	return &$right($c) if ref $c eq "Gtk::TreeItem" && $c->subtree && $c->expanded;
-
-	if (my $n = &$next_child($c, 1)) {
-	    $n;
-	} else {
-	    return if ref $c->parent ne 'Gtk::Tree';	
-	    &$down($c->parent);
-	}
-    };
-    $up = sub {
-	my ($c) = @_;
-	if (my $n = &$next_child($c, -1)) {
-	    $n = ($n->subtree->children)[-1] while ref $n eq "Gtk::TreeItem" && $n->subtree && $n->expanded;
-	    $n;
-	} else {
-	    return if ref $c->parent ne 'Gtk::Tree';	
-	    &$left($c);
-	}
-    };
-}
-
-sub create_treeitem($) {
-    my ($name) = @_;
-    
-    my $w = new Gtk::TreeItem($name);
-    $w->signal_connect(key_press_event => sub {
-        my (undef, $e) = @_;
-        local $_ = chr ($e->{keyval});
-
-	if ($e->{keyval} > 0x100) {
-	    my $n;
-	    $n = &$left($w)  if /[Q´\x96]/;
-	    $n = &$right($w) if /[S¶\x98]/;
-	    $n = &$up($w)    if /[R¸\x97]/;
-	    $n = &$down($w)  if /[T²\x99]/;
-	    if ($n) {
-		$n->focus('up');
-		$w->signal_emit_stop("key_press_event"); 
-	    }
-	    $w->expand if /[+«]/;
-	    $w->collapse if /[-\xad]/;
-	    do { 
-		$w->expanded ? $w->collapse : $w->expand; 
-		$w->signal_emit_stop("key_press_event"); 
-	    } if /[\r\x8d]/;
-	}
-        1;
-    });
-    $w;
-}
-
-
-
-#-###############################################################################
-#- ask_XXX
-
-#- just give a title and some args, and it will return the value given by the user
-#-###############################################################################
-
-sub ask_warn       { my $w = my_gtk->new(shift @_); $w->_ask_warn(@_); main($w); }
-sub ask_yesorno    { my $w = my_gtk->new(shift @_); $w->_ask_okcancel(@_, _("Yes"), _("No")); main($w); }
-sub ask_okcancel   { my $w = my_gtk->new(shift @_); $w->_ask_okcancel(@_, _("Is this correct?"), _("Ok"), _("Cancel")); main($w); }
-sub ask_from_entry { my $w = my_gtk->new(shift @_); $w->_ask_from_entry(@_); main($w); }
-
-sub _ask_from_entry($$@) {
-    my ($o, @msgs) = @_;
-    my $entry = new Gtk::Entry;
-    my $f = sub { $o->{retval} = $entry->get_text; Gtk->main_quit };
-    $o->{ok_clicked} = $f;
-    $o->{cancel_clicked} = sub { undef $o->{retval}; Gtk->main_quit };
-
-    gtkadd($o->{window},
-	  gtkpack($o->create_box_with_title(@msgs),
-		 gtksignal_connect($entry, 'activate' => $f),
-		 ($o->{hide_buttons} ? () : create_okcancel($o))),
-	  );
-    $entry->grab_focus;
-}
-
-sub _ask_warn($@) {
-    my ($o, @msgs) = @_;
-    gtkadd($o->{window},
-	  gtkpack($o->create_box_with_title(@msgs),
-		 gtksignal_connect(my $w = new Gtk::Button(_("Ok")), "clicked" => sub { Gtk->main_quit }),
-		 ),
-	  );
-    $w->grab_focus;
-}
-
-sub _ask_okcancel($@) {
-    my ($o, @msgs) = @_;
-    my ($ok, $cancel) = splice @msgs, -2;
-
-    gtkadd($o->{window},
-	   gtkpack(create_box_with_title($o, @msgs),
-		   create_okcancel($o, $ok, $cancel),
-		 )
-	 );
-    $o->{ok}->grab_focus;
-}
-
-
-sub _ask_file {
-    my ($o, $title, $path) = @_;
-    my $f = $o->{rwindow} = new Gtk::FileSelection $title;
-    $f->set_filename($path);
-    $f->ok_button->signal_connect(clicked => sub { $o->{retval} = $f->get_filename ; Gtk->main_quit });
-    $f->cancel_button->signal_connect(clicked => sub { Gtk->main_quit });
-    $f->hide_fileop_buttons;
-}
-
-1;
-
-#-###############################################################################
-#- rubbish
-#-###############################################################################
-
-#-sub label_align($$) {
-#-    my $w = shift;
-#-    local $_ = shift;
-#-    $w->set_alignment(!/W/i, !/N/i);
-#-    $w
-#-}
-
diff --git a/perl-install/network.pm b/perl-install/network.pm
deleted file mode 100644
index 9979e439e..000000000
--- a/perl-install/network.pm
+++ /dev/null
@@ -1,5 +0,0 @@
-package network; # $Id$
-
-use network::network;
-
-1;
diff --git a/perl-install/network/adsl.pm b/perl-install/network/adsl.pm
deleted file mode 100644
index 10bf80ec2..000000000
--- a/perl-install/network/adsl.pm
+++ /dev/null
@@ -1,181 +0,0 @@
-package network::adsl;
-
-use common;
-use run_program;
-use network::tools;
-use network::ethernet;
-use modules;
-
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix $connect_file $disconnect_file);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(adsl_ask_info adsl_detect adsl_conf adsl_conf_backend);
-
-sub configure {
-    my ($netcnx, $netc, $intf, $first_time) = @_;
-    $::isInstall and $in->set_help('configureNetworkADSL');
-  conf_adsl_step1:
-    my $type = $in->ask_from_list_(_("Connect to the Internet"),
-				   _("The most common way to connect with adsl is pppoe.
-Some connections use pptp, a few ones use dhcp.
-If you don't know, choose 'use pppoe'"), [__("use pppoe"), __("use pptp"), __("use dhcp"), __("Alcatel speedtouch usb")]) or return;
-    $type =~ s/use //;
-    if ($type eq 'pppoe') {
-	$in->do_pkgs->install("rp-$type");
-	$netcnx->{type} = "adsl_$type";
-	$netcnx->{"adsl_$type"} = {};
-	adsl_conf($netcnx->{"adsl_$type"}, $netc, $intf, $type) or goto conf_adsl_step1;
-	#-network::configureNetwork($prefix, $netc, $in, $intf, $first_time);
-#  	if ($::isStandalone and $netc->{NET_DEVICE}) {
-#  	    $in->ask_yesorno(_("Network interface"),
-#  			     _("I'm about to restart the network device %s. Do you agree?", $netc->{NET_DEVICE}), 1)
-#  	      and system("$prefix/sbin/ifdown $netc->{NET_DEVICE}; $prefix/sbin/ifup $netc->{NET_DEVICE}");
-#  	}
-    }
-    if ($type eq 'dhcp') {
-	$in->do_pkgs->install(qw(dhcpcd));
-	go_ethernet($netc, $intf, 'dhcp', '', '', $first_time) or goto conf_adsl_step1;
-    }
-    if ($type eq 'pptp') {
-	$in->do_pkgs->install(qw(pptp-adsl));
-	$netcnx->{type} = "adsl_$type";
-	$netcnx->{"adsl_$type"} = {};
-	adsl_conf($netcnx->{"adsl_$type"}, $netc, $intf, $type) or goto conf_adsl_step1;
-    }
-    if ($type =~ /speedtouch/) {
-	$type = 'speedtouch';
-	$in->do_pkgs->install(qw(speedtouch));
-	$netcnx->{type} = "adsl_$type";
-	$netcnx->{"adsl_$type"} = {};
-	$netcnx->{"adsl_$type"}{vpivci} = '';
-	adsl_conf($netcnx->{"adsl_$type"}, $netc, $intf, $type) or goto conf_adsl_step1;
-    }
-    $type =~ /speedtouch/ or $netconnect::need_restart_network = 1;
-    1;
-}
-
-sub adsl_ask_info {
-    my ($adsl, $netc, $intf) = @_;
-    add2hash($netc, { dnsServer2 => '', dnsServer3 => '', DOMAINNAME2 => '' });
-    add2hash($adsl, { login => '', passwd => '', passwd2 => '' });
-    ask_info2($adsl, $netc);
-}
-
-#- adsl_detect : detect adsl modem on a given interface
-#- input :
-#-  $interface : interface where the modem is supposed to be connected : should be "ethx"
-#- output:
-#-  true/false : success|failed
-sub adsl_detect {
-    return 0;
-    my ($interface) = @_;
-    run_program::rooted($prefix, "ifconfig $interface 10.0.0.10 netmask 255.255.255.0");
-    my $ret=run_program::rooted($prefix, "/bin/ping -c 1 10.0.0.138  2> /dev/null");
-    run_program::rooted($prefix, "ifconfig $interface 0.0.0.0 netmask 255.255.255.0");
-    run_program::rooted($prefix, "/etc/init.d/network restart");
-    $ret;
-}
-
-sub adsl_conf {
-    my ($adsl, $netc, $intf, $adsl_type) = @_;
-
-  adsl_conf_step_1:
-    adsl_ask_info ($adsl, $netc, $intf) or return;
-  adsl_conf_step_2:
-    $adsl_type eq 'speedtouch' or conf_network_card($netc, $intf, 'static' , '10.0.0.10' ) or goto adsl_conf_step_1;
-    adsl_conf_backend($adsl, $netc, $adsl_type);
-    1;
-}
-
-sub adsl_conf_backend {
-    my ($adsl, $netc, $adsl_type, $netcnx) = @_;
-    defined $netcnx and $netc->{adsltype} = $netcnx->{type};
-    $netc->{adsltype} ||= "adsl_$adsl_type";
-    mkdir_p("$prefix/etc/ppp");
-    output("$prefix/etc/ppp/options",
-'lock
-noipdefault
-persist
-noauth
-usepeerdns
-defaultroute
-') if $adsl_type =~ /pptp|pppoe|speedtouch/;
-
-    write_secret_backend($adsl->{login}, $adsl->{passwd});
-
-    if ($adsl_type eq 'pppoe') {
-	substInFile {
-	    s/ETH=.*\n/ETH=$netc->{NET_DEVICE}\n/;
-	    s/USER=.*\n/USER=$adsl->{login}\n/;
-	} "$prefix/etc/ppp/pppoe.conf";
-    }
-
-    if ($adsl_type eq 'speedtouch') {
-	$netc->{vpivci} =~ /(\d+)_(\d+)/;
-	output("$prefix/etc/ppp/peers/adsl", 
-qq{noauth
-noipdefault
-pty "/usr/bin/pppoa2 -vpi $1 -vci $2"
-sync
-kdebug 1
-noaccomp
-nopcomp
-noccp
-novj
-holdoff 4
-maxfail 25
-persist
-usepeerdns
-defaultroute
-user "$adsl->{login}"
-});
-	modules::add_alias($_->[0], $_->[1]) foreach (['char-major-108', 'ppp_generic'],
-						      ['tty-ldisc-3', 'ppp_async'],
-						      ['tty-ldisc-13', 'n_hdlc'],
-						      ['tty-ldisc-14', 'ppp_synctty'],
-						      ['ppp-compress-21', 'bsd_comp'],
-						      ['ppp-compress-24', 'ppp_deflate'],
-						      ['ppp-compress-26', 'ppp_deflate']);
-	$::isStandalone and modules::write_conf($prefix);
-	my $mgmtrpm;
-	if ($::isStandalone) {
-	    $mgmtrpm = `grep speedtouch_mgmt /var/lib/urpmi/depslist.ordered` ? 1 : 0;
-	} else {
-	    require pkgs;
-	    $mgmtrpm = pkgs::packageByName($in->{package}, "speedtouch_mgmt");
-	}
-	if ($mgmtrpm) {
-	    $in->do_pkgs->install('speedtouch_mgmt')
-	} else {
-	    -e "$prefix/usr/share/speedtouch/mgmt.o" or $in->ask_warn('', _('You need the alcatel microcode.
-Download it at
-http://www.alcatel.com/consumer/dsl/dvrreg_lx.htm
-and copy the mgmt.o in /usr/share/speedtouch'));
-	}
-    }
-
-    if ($adsl_type eq 'pptp') {
-	write_cnx_script($netc, "adsl",
-"/sbin/route del default
-/usr/bin/pptp 10.0.0.138 name $adsl->{login}
-",
-'/usr/bin/killall pptp pppd
-', $netc->{adsltype}) } elsif ($adsl_type eq 'pppoe') {
-    write_cnx_script($netc, "adsl",
-"/sbin/route del default
-LC_ALL=C LANG=C LANGUAGE=C LC_MESSAGES=C /usr/sbin/adsl-start $netc->{NET_DEVICE} $adsl->{login}
-",
-'/usr/sbin/adsl-stop
-/usr/bin/killall pppoe pppd
-', $netc->{adsltype}) } elsif ($adsl_type eq 'speedtouch') {
-    write_cnx_script($netc, 'adsl',
-'/usr/share/speedtouch/speedtouch.sh start
-',
-'/usr/share/speedtouch/speedtouch.sh stop
-', $netc->{adsltype}) }
-
-    $netc->{NET_INTERFACE}='ppp0';
-}
-
-1;
diff --git a/perl-install/network/ethernet.pm b/perl-install/network/ethernet.pm
deleted file mode 100644
index 0591df8d8..000000000
--- a/perl-install/network/ethernet.pm
+++ /dev/null
@@ -1,216 +0,0 @@
-package network::ethernet;
-
-use network::network;
-use modules;
-use any;
-use detect_devices;
-use common;
-use run_program;
-use network::tools;
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(configureNetwork conf_network_card conf_network_card_backend go_ethernet);
-
-sub configure_cable {
-    my ($netcnx, $netc, $intf, $first_time) = @_;
-    $::isInstall and $in->set_help('configureNetworkCable');
-    $netcnx->{type}='cable';
-    #  		     $netcnx->{cable}={};
-    #  		     $in->ask_from_entries_ref(_("Cable connection"),
-    #  _("Please enter your host name if you know it.
-    #  Some DHCP servers require the hostname to work.
-    #  Your host name should be a fully-qualified host name,
-    #  such as ``mybox.mylab.myco.com''."),
-    #  					       [_("Host name:")], [ \$netcnx->{cable}{hostname} ]);
-    if ($::expert) {
-	my @m=(
-	       { description => "dhcpcd",
-		 c => 1},
-	       { description => "dhcpxd",
-		 c => 3},
-	       { description => "dhcp-client",
-		 c => 4},
-	      );
-	if (my $f = $in->ask_from_listf(_("Connect to the Internet"),
-					_("Which dhcp client do you want to use?
-Default is dhcpcd"),
-					sub { $_[0]{description} },
-					\@m )) {
-	    $f->{c}==1 and $netcnx->{dhcp_client}="dhcpcd" and $in->do_pkgs->install(qw(dhcpcd));
-	    $f->{c}==3 and $netcnx->{dhcp_client}="dhcpxd" and $in->do_pkgs->install(qw(dhcpxd));
-	    $f->{c}==4 and $netcnx->{dhcp_client}="dhcp-client" and $in->do_pkgs->install(qw(dhcp-client));
-	}
-    } else {
-	$in->do_pkgs->install(qw(dhcpcd));
-    }
-    go_ethernet($netc, $intf, 'dhcp', '', '', $first_time);
-    write_cnx_script($netc, "cable",
-qq(
-/sbin/ifup $netc->{NET_DEVICE}
-),
-qq(
-/sbin/ifdown $netc->{NET_DEVICE}
-), $netcnx->{type});
-    1;
-}
-
-sub configure_lan {
-    my ($netcnx, $netc, $intf, $first_time) = @_;
-    $::isInstall and $in->set_help('configureNetworkIP');
-    configureNetwork($netc, $intf, $first_time) or return;
-    configureNetwork2($in, $prefix, $netc, $intf);
-    $netc->{NETWORKING} = "yes";
-    if ($netc->{GATEWAY}) {
-	$netcnx->{type}='lan';
-	$netcnx->{NET_DEVICE} = $netc->{NET_DEVICE} = '';
-	$netcnx->{NET_INTERFACE} = 'lan'; #$netc->{NET_INTERFACE};
-        write_cnx_script($netc, "local network",
-qq(
-/etc/rc.d/init.d/network restart
-),
-qq(
-/etc/rc.d/init.d/network stop
-/sbin/ifup lo
-), $netcnx->{type});
-    }
-    $::isStandalone and modules::write_conf($prefix);
-    1;
-}
-
-sub conf_network_card {
-    my ($netc, $intf, $type, $ipadr, $netadr) = @_;
-    #-type =static or dhcp
-    any::setup_thiskind($in, 'net', !$::expert, 1);
-    my @all_cards=conf_network_card_backend($netc, $intf, $type, undef, $ipadr, $netadr);
-    my $interface;
-    @all_cards == () and $in->ask_warn('', _("No ethernet network adapter has been detected on your system.
-I cannot set up this connection type.")) and return;
-    @all_cards == 1 and $interface = $all_cards[0]->[0] and goto l1;
-    again :
-	$interface = $in->ask_from_list(_("Choose the network interface"),
-					_("Please choose which network adapter you want to use to connect to Internet"),
-					[ map { $_->[0] . ($_->[1] ? " ( using module $_->[1] )" : "") } @all_cards ]
-				       ) or return;
-    defined $interface or goto again;
-  l1:
-    $::isStandalone and modules::write_conf($prefix);
-
-    my $device=conf_network_card_backend($netc, $intf, $type, $interface, $ipadr, $netadr, $interface);
-#      if ( $::isStandalone and !($type eq "dhcp")) {
-#  	$in->ask_yesorno(_("Network interface"),
-#  			  _("I'm about to restart the network device:\n") . $device . _("\nDo you agree?"), 1) and configureNetwork2($in, $prefix, $netc, $intf) and system("$prefix/sbin/ifdown $device;$prefix/sbin/ifup $device");
-#      }
-    1;
-}
-
-#- conf_network_card_backend : configure the network cards and return the list of them, or configure one specified interface : WARNING, you have to setup the ethernet cards, by calling setup_thiskind($in, 'net', !$::expert, 1) or setup_thiskind_backend before calling this function. Basically, you call this function in 2 times.
-#- input
-#-  $prefix
-#-  $netc
-#-  $intf
-#-  $type : type of interface, must be given if $interface is : string : "static" or "dhcp"
-#-  $interface : facultative, if given, set this interface and return it in a proper form. If not, return @all_cards
-#-  $ipadr : facultative, ip address of the interface : string
-#-  $netadr : facultative, netaddress of the interface : string
-#- when $interface is given, informations are written in $intf and $netc. If not, @all_cards is returned.
-#- $intf output: $device is the result of
-#-  $intf->{$device}->{DEVICE} : which device is concerned : $device is the result of $interface =~ /(eth[0-9]+)/; my $device = $1;;
-#-  $intf->{$device}->{BOOTPROTO} : $type
-#-  $intf->{$device}->{NETMASK} : '255.255.255.0'
-#-  $intf->{$device}->{NETWORK} : $netadr
-#-  $intf->{$device}->{ONBOOT} : "yes"
-#- $netc output:
-#-  $netc->{nb_cards} : nb of ethernet cards
-#-  $netc->{NET_DEVICE} : this is used to indicate that this eth card is used to connect to internet : $device
-#- output:
-#-  $all_cards : a list of a list ( [eth1, module1], ... , [ethn, modulen]). Pass the ethx as $interface in further call.
-#-  $device : only returned in case $interface was given it's $interface, but filtered by /eth[0-9+]/ : string : /eth[0-9+]/
-sub conf_network_card_backend {
-    my ($netc, $intf, $type, $interface, $ipadr, $netadr) = @_;
-    #-type =static or dhcp
-    if (!$interface) {
-	my @all_cards = detect_devices::getNet();
-	$netc->{nb_cards} = @all_cards;
-
-	my @devs = detect_devices::pcmcia_probe();
-	modules::mergein_conf("$prefix/etc/modules.conf");
-	my $saved_driver;
-	return map {
-	    my $interface = $_;
-	    my $a = modules::get_alias($interface);
-	    my $b;
-	    foreach (@devs) {
-		$_->{device} eq $interface and $b = $_->{driver};
-	    }
-	    $a ||= $b;
-	    if ($a) { $saved_driver = $a }
-	    [$interface, $saved_driver];
-	} @all_cards;
-    }
-    my ($device) = $interface =~ /(eth[0-9]+)/ or die("the interface is not an ethx");
-    $netc->{NET_DEVICE} = $device; #- one consider that there is only ONE Internet connection device..
-
-    @{$intf->{$device}}{qw(DEVICE BOOTPROTO   NETMASK     NETWORK ONBOOT)} = 
-                         ($device, $type, '255.255.255.0', $netadr, 'yes');
-
-    $intf->{$device}->{IPADDR} = $ipadr if $ipadr;
-    $device;
-}
-
-sub go_ethernet {
-    my ($netc, $intf, $type, $ipadr, $netadr, $first_time) = @_;
-    conf_network_card($netc, $intf, $type, $ipadr, $netadr) or return;
-    $netc->{NET_INTERFACE}=$netc->{NET_DEVICE};
-    configureNetwork($netc, $intf, $first_time) or return;
-#      if ( $::isStandalone and $netc->{NET_DEVICE}) {
-#  	$in->ask_yesorno(_("Network interface"),
-#  			 _("I'm about to restart the network device %s. Do you agree?", $netc->{NET_DEVICE}), 1) and system("$prefix/sbin/ifdown $netc->{NET_DEVICE}; $prefix/sbin/ifup $netc->{NET_DEVICE}");
-#      }
-    1;
-}
-
-sub configureNetwork {
-    my ($netc, $intf, $first_time) = @_;
-    local $_;
-    any::setup_thiskind($in, 'net', !$::expert, 1);
-    my @l = detect_devices::getNet() or die _("no network card found");
-    my @all_cards = conf_network_card_backend ($netc, $intf, undef, undef, undef, undef);
-
-  configureNetwork_step_1:
-    my $n_card=0;
-    $netc ||= {};
-    my $last; foreach (@l) {
-	my $intf2 = findIntf($intf ||= {}, $_);
-	add2hash($intf2, $last);
-	add2hash($intf2, { NETMASK => '255.255.255.0' });
-	configureNetworkIntf($netc, $in, $intf2, $netc->{NET_DEVICE}, 0, $all_cards[$n_card]->[1]) or return;
-
-	$last = $intf2;
-	$n_card++;
-    }
-    #-	  {
-    #-	      my $wait = $o->wait_message(_("Hostname"), _("Determining host name and domain..."));
-    #-	      network::guessHostname($o->{prefix}, $o->{netc}, $o->{intf});
-    #-	  }
-    $last or return;
-    if ($last->{BOOTPROTO} =~ /^(dhcp|bootp)$/) {
-	$netc->{minus_one} = 1;
-	my $dhcp_hostname = $netc->{HOSTNAME};
-	$::isInstall and $in->set_help('configureNetworkHostDHCP');
-	$in->ask_from(_("Configuring network"),
-_("Please enter your host name if you know it.
-Some DHCP servers require the hostname to work.
-Your host name should be a fully-qualified host name,
-such as ``mybox.mylab.myco.com''."),
-		      [ { label => _("Host name"), val => \$netc->{HOSTNAME} }]) or goto configureNetwork_step_1;
-	$netc->{HOSTNAME} ne $dhcp_hostname and $netc->{DHCP_HOSTNAME} = $netc->{HOSTNAME};
-    } else {
-	configureNetworkNet($in, $netc, $last ||= {}, @l) or goto configureNetwork_step_1;
-    }
-    miscellaneousNetwork($in);
-    1;
-}
-
-1;
diff --git a/perl-install/network/isdn.pm b/perl-install/network/isdn.pm
deleted file mode 100644
index 5646ca01f..000000000
--- a/perl-install/network/isdn.pm
+++ /dev/null
@@ -1,276 +0,0 @@
-package network::isdn;
-
-use network::isdn_consts;
-use common;
-use any;
-use modules;
-use run_program;
-use log;
-use network::tools;
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix);
-use MDK::Common::File;
-@ISA = qw(Exporter);
-@EXPORT = qw(isdn_write_config isdn_write_config_backend get_info_providers_backend isdn_ask_info isdn_ask_protocol isdn_ask isdn_detect isdn_detect_backend isdn_get_list isdn_get_info);
-
-sub configure {
-    my ($netcnx, $netc) = @_;
-  isdn_step_1:
-    defined $netc->{autodetect}{isdn}{id} and goto intern_pci;
-    $::isInstall and $in->set_help('configureNetworkISDN');
-    my $e = $in->ask_from_list_(_("Network Configuration Wizard"),
-				_("What kind is your ISDN connection?"), [ __("Internal ISDN card"), __("External ISDN modem")]
-			       ) or return;
-    if ($e =~ /card/) {
-      intern_pci:
-	$netc->{isdntype}='isdn_internal';
-	$netcnx->{isdn_internal}={};
-	$netcnx->{isdn_internal}{$_} = $netc->{autodetect}{isdn}{$_} foreach ('description', 'vendor', 'id', 'driver', 'card_type', 'type');
-	isdn_detect($netcnx->{isdn_internal}, $netc) or return;
-    } else {
-	$netc->{isdntype}='isdn_external';
-	$netcnx->{isdn_external}={};
-	$netcnx->{isdn_external}{device}=$netc->{autodetect}{modem};
-	$netcnx->{isdn_external}{special_command}='AT&F&O2B40';
-	require network::modem;
-	network::modem::pppConfig($netcnx->{isdn_external}, $mouse, $netc) or goto isdn_step_1;
-    }
-    1;
-}
-
-sub isdn_write_config {
-    my ($isdn, $netc) = @_;
-  isdn_write_config_step_1:
-    my $e = $in->ask_from_list_(_("Network Configuration Wizard"),
-				    _("Which ISDN configuration do you prefer?
-
-* The Old configuration uses isdn4net. It contains powerfull
-  tools, but is tricky to configure, and not standard.
-
-* The New configuration is easier to understand, more
-  standard, but with less tools.
-
-We recommand the light configuration.
-"), [ __("New configuration (isdn-light)"), __("Old configuration (isdn4net)")]
-			       ) or return;
-    my ($rmpackage, $instpackage) = $e =~ /light/ ? ('isdn4net', 'isdn-light') : ('isdn-light', 'isdn4net');
-    if (!$::isStandalone) {
-	require pkgs;
-	my $p = pkgs::packageByName($in->{packages}, $rmpackage);
-	$p && pkgs::packageFlagSelected($p) and pkgs::unselectPackage($in->{packages}, $p);
-    }
-    run_program::rooted($prefix, "rpm", "-e", "$rmpackage");
-    $in->do_pkgs->install($instpackage, if_($isdn->{speed} =~ /128/, 'ibod'), 'isdn4k-utils');
-    my $light = $e =~ /light/ ? 1 : 0;
-    isdn_write_config_backend($isdn, $light, $netc);
-    1;
-}
-
-sub isdn_write_config_backend {
-    my ($isdn, $light, $netc, $netcnx) = @_;
-    defined $netcnx and $netc->{isdntype} = $netcnx->{type};
-    if ($light) {
-	modules::mergein_conf("$prefix/etc/modules.conf");
-	if ($isdn->{id}) {
-	    isdn_detect_backend($isdn);
-	} else {
-	    my $a="";
-	    defined $isdn->{$_} and $a .= "$_=" . $isdn->{$_} . " " foreach qw(type protocol mem io io0 io1 irq);
-	    $isdn->{driver} eq "hisax" and $a.="id=HiSax";
-	    modules::set_options($isdn->{driver}, $a);
-	}
-	modules::add_alias("ippp0", $isdn->{driver});
-	$::isStandalone and modules::write_conf($prefix);
-	foreach my $f ('ioptions1B', 'ioptions2B') {
-	    substInFile { s/^name .*\n//; $_ .= "name $isdn->{login}\n" if eof  } "$prefix/etc/ppp/$f";
-	    chmod 0600, $f;
-	}
-	foreach my $f ('isdn1B.conf', 'isdn2B.conf') {
-	    my $a=1;
-	    substInFile {
-		s/EAZ =.*/EAZ = $isdn->{phone_in}/;
-		s/PHONE_OUT =.*/PHONE_OUT = $isdn->{phone_out}/;
-		if (/NAME = ippp0/ .. /PPPBIND = 0/) {
-		    s/HUPTIMEOUT =.*/HUPTIMEOUT = $isdn->{huptimeout}/;
-		}
-	    } "$prefix/etc/isdn/$f";
-	    chmod 0600, $f;
-	}
-	my $bundle = $isdn->{speed} =~ /64/ ? "1B" : "2B";
-	symlinkf("isdn" . $bundle . ".conf", "$prefix/etc/isdn/isdnctrl.conf");
-	symlinkf("ioptions" . $bundle, "$prefix/etc/ppp/ioptions");
-    } else {
-	my $f = "$prefix/etc/isdn/profile/link/myisp";
-	output ($f,
-	  qq(
-I4L_USERNAME="$isdn->{login}"
-I4L_SYSNAME=""
-I4L_LOCALMSN="$isdn->{phone_in}"
-I4L_REMOTE_OUT="$isdn->{phone_out}"
-I4L_DIALMODE="$isdn->{dialing_mode}"
-) . if_($isdn->{speed} =~ /128/, 'SLAVE="ippp1"
-'));
-	chmod 0600, $f;
-
-	output "$prefix/etc/isdn/profile/card/mycard",
-	  qq(
-I4L_MODULE="$isdn->{driver}"
-I4L_TYPE="$isdn->{type}"
-I4L_IRQ="$isdn->{irq}"
-I4L_MEMBASE="$isdn->{mem}"
-I4L_PORT="$isdn->{io}"
-I4L_IO0="$isdn->{io0}"
-I4L_IO1="$isdn->{io1}"
-I4L_ID="HiSax"
-I4L_FIRMWARE="$isdn->{firmware}"
-);
-
-	output "$prefix/etc/ppp/ioptions",
-	  "lock
-usepeerdns
-defaultroute
-";
-	system "$prefix/etc/rc.d/init.d/isdn4linux restart";
-    }
-
-    substInFile { s/^FIRMWARE.*\n//; $_ .= qq(FIRMWARE="$isdn->{firmware}"\n) if eof  } "$prefix/etc/sysconfig/network-scripts/ifcfg-ippp0";
-
-    write_secret_backend($isdn->{login}, $isdn->{passwd});
-
-    write_cnx_script($netc, "isdn",
-"/sbin/route del default
-/sbin/ifup ippp0
-/sbin/isdnctrl dial ippp0
-" . if_($isdn->{speed} =~ /128/, "service ibod restart
-"),
-"/sbin/isdnctrl hangup ippp0
-/sbin/ifdown ippp0
-"  . if_($isdn->{speed} =~ /128/, "service ibod stop
-"), $netc->{isdntype});
-    1;
-}
-
-sub get_info_providers_backend {
-    my ($isdn, $netc, $name, $file) = @_;
-    $name eq 'Unlisted - edit manually' and return;
-    foreach (catMaybeCompressed($file)) {
-	chop;
-	my ($name_, $phone, $real, $dns1, $dns2) = split '=>';
-	if ($name eq $name_) {
-	    @{$isdn}{qw(user_name phone_out DOMAINNAME2 dnsServer3 dnsServer2)} =
-	               ((split(/\|/, $name_))[2], $phone, $real, $dns1, $dns2);
-	}
-    }
-}
-
-sub isdn_ask_info {
-    my ($isdn, $netc) = @_;
-    my $f = "$ENV{SHARE_PATH}/ldetect-lst/isdn.db";
-    $f = "$prefix$f" if !-e $f;
-    my $str= $in->ask_from_treelist( _("ISDN Configuration"), _("Select your provider.\n If it's not in the list, choose Unlisted"),
-				     '|', ['Unlisted - edit manually',
-					   read_providers_backend($f)], 'Unlisted - edit manually')
-      or return;
-    get_info_providers_backend($isdn, $netc, $str || 'Unlisted - edit manually', $f);
-    $isdn->{huptimeout} = 180;
-    $isdn->{$_} ||= '' foreach qw(phone_in phone_out dialing_mode login passwd passwd2 idl speed);
-    add2hash($netc, { dnsServer2 => '', dnsServer3 => '', DOMAINNAME2 => '' });
-    ask_info2($isdn, $netc);
-}
-
-sub isdn_ask_protocol {
-    my @toto=(
-	      { description => $::expert ? _("Europe protocol (EDSS1)") : _("Europe protocol"),
-		protokol => 2},
-	      { description => $::expert ? _("Protocol for the rest of the world \n no D-Channel (leased lines)") : _("Protocol for the rest of the world"),
-		protokol => 3}
-	     );
-    my $e = $in->ask_from_listf(_("ISDN Configuration"),
-				_("Which protocol do you want to use ?"),
-				sub { $_[0]{description} },
-				\@toto ) or return 0;
-    $e->{protokol};
-}
-
-sub isdn_ask {
-    my ($isdn, $netc, $label) = @_;
-  isdn_ask_step_1:
-    my $e = $in->ask_from_list_(_("ISDN Configuration"),
-				$label . "\n" . _("What kind of card do you have?"),
-				[ __("ISA / PCMCIA"), __("PCI"), __("I don't know") ]
-			       ) or return;
-    if ($e =~ /PCI/) {
-	$isdn->{card_type} = 'pci';
-    } else {
-	$in->ask_from_list_(_("ISDN Configuration"),
-			    _("
-If you have an ISA card, the values on the next screen should be right.\n
-If you have a PCMCIA card, you have to know the irq and io of your card.
-"),
-			    [ __("Continue"), __("Abort") ]) eq 'Continue' or goto isdn_ask_step_1;
-	$isdn->{card_type} = 'isa';
-    }
-
-  isdn_ask_step_2:
-    $e = $in->ask_from_listf(_("ISDN Configuration"),
-			     _("Which is your ISDN card ?"),
-			     sub { $_[0]{description} },
-			     [ grep {$_->{card} eq $isdn->{card_type}; } @isdndata ] ) or goto isdn_ask_step_1;
-    $e->{$_} and $isdn->{$_} = $e->{$_} foreach qw(driver type mem io io0 io1 irq firmware);
-
-  isdn_ask_step_3:
-    $isdn->{protocol} = isdn_ask_protocol() or goto isdn_ask_step_2;
-  isdn_ask_step_4:
-    isdn_ask_info($isdn, $netc) or goto isdn_ask_step_3;
-    isdn_write_config($isdn, $netc) or goto isdn_ask_step_4;
-    1;
-}
-
-sub isdn_detect {
-    my ($isdn, $netc) = @_;
-    if ($isdn->{id}) {
-  	log::l("found isdn card : $isdn->{description}; vendor : $isdn->{vendor};id : $isdn->{id}; driver : $isdn->{driver}\n");
-	$isdn->{description} =~ s/\|/ -- /;
-	if ($isdn->{type} eq '') {
-	    isdn_ask($isdn, $netc, _("I have detected an ISDN PCI Card, but I don't know the type. Please select one PCI card on the next screen.")) or return;
-	} else {
-	  isdn_detect_step_1:
-	    $isdn->{protocol}=isdn_ask_protocol() or return;
-	  isdn_detect_step_2:
-	    isdn_ask_info($isdn, $netc) or goto isdn_detect_step_1;
-	    isdn_write_config($isdn, $netc) or goto isdn_detect_step_2;
-	}
-    } else {
-	isdn_ask($isdn, $netc, _("No ISDN PCI card found. Please select one on the next screen.")) or return;
-    }
-    $netc->{$_}='ippp0' foreach 'NET_DEVICE', 'NET_INTERFACE';
-    1;
-}
-
-sub isdn_detect_backend {
-    my ($isdn) = @_;
-    if (my ($c) = (modules::get_that_type('isdn'))) {
-  	$isdn->{$_} = $c->{$_} foreach qw(description vendor id driver options firmware);
-	$isdn->{$_} = sprintf("%0x", $isdn->{$_}) foreach ('vendor', 'id');
-	$isdn->{card_type} = 'pci';
-	($isdn->{type}) = $isdn->{options} =~ /type=(\d+)/;
-#	$c->{options} !~ /id=HiSax/ && $isdn->{driver} eq "hisax" and $c->{options} .= " id=HiSax";
-	if ($c->{options} !~ /protocol=/ && $isdn->{protocol} =~ /\d/) {
-	    modules::set_options($c->{driver}, $c->{options} . " protocol=" . $isdn->{protocol});
-	}
-	$c->{options} =~ /protocol=(\d)/ and $isdn->{protocol} = $1;
-    }
-}
-
-sub isdn_get_list {
-    map { $_->{description} } @isdndata;
-}
-
-sub isdn_get_info {
-    my ($desc) = @_;
-    foreach (@isdndata) {
-	return $_ if ($_->{description} eq $desc);
-    }
-}
-
-1;
diff --git a/perl-install/network/isdn_consts.pm b/perl-install/network/isdn_consts.pm
deleted file mode 100644
index 79756643d..000000000
--- a/perl-install/network/isdn_consts.pm
+++ /dev/null
@@ -1,326 +0,0 @@
-package network::isdn; # $Id$
-
-@isdndata =
-  (
-   {description => "Teles 16.0 (ISA)",               #1 irq, mem, io
-    driver => 'hisax',
-    type => '1',
-    irq => '5',
-    mem => '0xd000',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "Teles  8.0 (ISA)", #2 irq, mem
-    driver => 'hisax',
-    type => '2',
-    irq => '9',
-    mem => '0xd800',
-    card => 'isa',
-   },
-   {description => "Teles 16.3 (ISA non PnP)", #3 irq, io
-    driver => 'hisax',
-    type => '3',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "Teles 16.3c (ISA PnP)", #14 irq, io
-    driver => 'hisax',
-    type => '14',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "Creatix/Teles (ISA PnP)",	#4 irq, io0 (ISAC), io1 (HSCX)
-    driver => 'hisax',
-    type => '4',
-    irq => '5',
-    io0 => '0x0000',
-    io1 => '0x0000',
-    card => 'isa',
-   },
-   {description => "Teles generic (PCI)", #21 no parameter
-    driver => 'hisax',
-    type => '21',
-    card => 'pci',
-   },
-   {description => "Teles 16.3 (PCMCIA)",	#8 irq, io
-    driver => 'hisax',
-    type => '8',
-    irq => '',
-    io => '0x',
-    card => 'isa',
-   },
-   {description => "Teles S0Box", #25 irq, io (of the used lpt port)
-    driver => 'hisax',
-    type => '25',
-    irq => '7',
-    io => '0x378',
-    card => 'isa',
-   },
-   {description => "ELSA PCC/PCF cards (ISA)", #6 io or nothing for autodetect (the io is required only if you have n>1 ELSA card )
-    driver => 'hisax',
-    type => '6',
-    io => "",
-    card => 'isa',
-   },
-   {description => "ELSA Quickstep 1000 (ISA)", #7 irq, io  (from isapnp setup)
-    driver => 'hisax',
-    type => '7',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   {description => "ELSA Quickstep 1000 (PCI)", #18 no parameter
-    driver => 'hisax',
-    type => '18',
-    card => 'pci',
-   },
-   {description => "ELSA Quickstep 3000 (PCI)", #18 no parameter
-    driver => 'hisax',
-    type => '18',
-    card => 'pci',
-   },
-   {description => "ELSA generic (PCMCIA)", #10 irq, io  (set with card manager)
-    driver => 'hisax',
-    type => '10',
-    irq => '',
-    io => '0x',
-    card => 'isa',
-   },
-   {description => "ELSA MicroLink (PCMCIA)", #10 irq, io  (set with card manager)
-    driver => 'elsa_cs',
-    card => 'isa',
-   },
-   {description => "ITK ix1-micro Rev.2 (ISA)", #9 irq, io
-    driver => 'hisax',
-    type => '9',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "Eicon.Diehl Diva (ISA PnP)", #11 irq, io
-    driver => 'hisax',
-    type => '11',
-    irq => '9',
-    io => '0x180',
-    card => 'isa',
-   },
-   {description => "Eicon.Diehl Diva 20 (PCI)", #11 no parameter
-    driver => 'hisax',
-    type => '11',
-    card => 'pci',
-   },
-   {description => "Eicon.Diehl Diva 20PRO (PCI)", #11 no parameter
-    driver => 'hisax',
-    type => '11',
-    card => 'pci',
-   },
-   {description => "Eicon.Diehl Diva 20_U (PCI)", #11 no parameter
-    driver => 'hisax',
-    type => '11',
-    card => 'pci',
-   },
-   {description => "Eicon.Diehl Diva 20PRO_U (PCI)", #11 no parameter
-    driver => 'hisax',
-    type => '11',
-    card => 'pci',
-   },
-   {description => "ASUS COM ISDNLink (ISA)", #12 irq, io  (from isapnp setup)
-    driver => 'hisax',
-    type => '12',
-    irq => '5',
-    io => '0x200',
-    card => 'isa',
-   },
-   {description => "ASUS COM ISDNLink (PCI)", #12
-    driver => 'hisax',
-    type => '35',
-    card => 'pci',
-   },
-   {description => "DynaLink (PCI)", #12
-    driver => 'hisax',
-    type => '12',
-    card => 'pci',
-   },
-   {description => "HFC-2BS0 based cards (ISA)", #13 irq, io
-    driver => 'hisax',
-    type => '13',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "HFC 2BDS0 (PCI)", #35 none
-    driver => 'hisax',
-    type => '35',
-    card => 'pci',
-   },
-   {description => "HFC 2BDS0 S+, SP (PCMCIA)", #37 irq,io (pcmcia must be set with cardmgr)
-    driver => 'hisax',
-    type => '37',
-    card => 'isa',
-   },
-   {description => "Sedlbauer Speed Card (ISA)", #15 irq, io
-    driver => 'hisax',
-    type => '15',
-    irq => '9',
-    io=> '0xd80',
-    card => 'isa',
-   },
-   {description => "Sedlbauer PC/104 (ISA)", #15 irq, io
-    driver => 'hisax',
-    type => '15',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "Sedlbauer Speed Card (PCI)", #15 no parameter
-    driver => 'hisax',
-    type => '15',
-    card => 'pci',
-   },
-   {description => "Sedlbauer Speed Star (PCMCIA)", #22 irq, io (set with card manager)
-    driver => 'sedlbauer_cs',
-    card => 'isa',
-   },
-   {description => "Sedlbauer Speed Fax+ (ISA Pnp)", #28 irq, io (from isapnp setup)
-    driver => 'hisax',
-    type => '28',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-    firmware => '/usr/lib/isdn/ISAR.BIN',
-   },
-   {description => "Sedlbauer Speed Fax+ (PCI)", #28 no parameter
-    driver => 'hisax',
-    type => '28',
-    card => 'pci',
-    firmware => '/usr/lib/isdn/ISAR.BIN',
-   },
-   {description => "USR Sportster internal (ISA)", #16 irq, io
-    driver => 'hisax',
-    type => '16',
-    irq => '9',
-    io=> '0xd80',
-    card => 'isa',
-   },
-   {description => "MIC card (ISA)",	#17 irq, io
-    driver => 'hisax',
-    type => '17',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "Compaq ISDN S0 card (ISA)", #19 irq, io0, io1, io (from isapnp setup io=IO2)
-    driver => 'hisax',
-    type => '19',
-    irq => '5',
-    io => '0x0000',
-    io0 => '0x0000',
-    io1 => '0x0000',
-    card => 'isa',
-   },
-   {description => "NETjet card (PCI)", #20 no parameter
-    driver => 'hisax',
-    type => '20',
-    card => 'pci',
-   },
-   {description => "Dr. Neuhaus Niccy (ISA PnP)", #24 irq, io0, io1 (from isapnp setup)
-    driver => 'hisax',
-    type => '24',
-    irq => '5',
-    io0 => '0x0000',
-    io1 => '0x0000',
-    card => 'isa',
-   },
-   {description => "Dr. Neuhaus Niccy (PCI)", ##24 no parameter
-    driver => 'hisax',
-    type => '24',
-    card => 'pci',
-   },
-   {description => "AVM A1 (Fritz) (ISA non PnP)", #5 irq, io
-    driver => 'hisax',
-    type => '5',
-    irq => '10',
-    io => '0x300',
-    card => 'isa',
-   },
-   {description => "AVM (ISA Pnp)", #27 irq, io  (from isapnp setup)
-    driver => 'hisax',
-    type => '27',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   {description => "AVM A1 (Fritz) (PCMCIA)", #26 irq, io (set with card manager)
-    driver => 'hisax',
-    type => '26',
-    irq => '',
-    card => 'isa',
-   },
-   {description => "AVM PCI (Fritz!) (PCI)", #27 no parameter
-    driver => 'hisax',
-    type => '27',
-    card => 'pci',
-   },
-   {description => "AVM B1 (PCI)",
-    driver => 'b1pci',
-    card => 'pci',
-   },
-   {description => "Siemens I-Surf 1.0 (ISA Pnp)", #29 irq, io, memory (from isapnp setup)   
-    driver => 'hisax',
-    type => '29',
-    irq => '9',
-    io => '0xd80',
-    mem => '0xd000',
-    card => 'isa',
-   },
-   {description => "ACER P10 (ISA Pnp)",	#30 irq, io (from isapnp setup)   
-    driver => 'hisax',
-    type => '30',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   {description => "HST Saphir (ISA Pnp)", #31 irq, io
-    driver => 'hisax',
-    type => '31',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   {description => "Telekom A4T (PCI)", #32 none
-    driver => 'hisax',
-    type => '32',
-    card => 'pci',
-   },
-   {description => "Scitel Quadro (PCI)", #33 subcontroller (4*S0, subctrl 1...4)
-    driver => 'hisax',
-    type => '33',
-    card => 'pci',
-   },
-   {description => "Gazel ISDN cards (ISA)", #34 irq,io
-    driver => 'hisax',
-    type => '34',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   {description => "Gazel ISDN cards (PCI)", #34 none
-    driver => 'hisax',
-    type => '34',
-    card => 'pci',
-   },
-   {description => "W6692 and Winbond based cards (PCI)", #36 none
-    driver => 'hisax',
-    type => '36',
-    card => 'pci',
-   },
-   {description => "Dynalink 128PH (PCI)", #36
-    driver => 'hisax',
-    type => '36',
-    card => 'pci',
-   }
-  );
-
-1;
diff --git a/perl-install/network/modem.pm b/perl-install/network/modem.pm
deleted file mode 100644
index 6fb48ae78..000000000
--- a/perl-install/network/modem.pm
+++ /dev/null
@@ -1,89 +0,0 @@
-package network::modem;
-
-use common;
-use any;
-use modules;
-use detect_devices;
-use mouse;
-use network::tools;
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(pppConfig modem_detect_backend);
-
-sub configure{
-    my ($netcnx, $mouse, $netc) = @_;
-    $netcnx->{type}='modem';
-    $netcnx->{$netcnx->{type}}={};
-    $netcnx->{modem}{device}=$netc->{autodetect}{modem};
-  modem_step_1:
-    pppConfig($netcnx->{$netcnx->{type}}, $mouse, $netc) or return;
-    write_cnx_script($netc, "modem",
-q(ifup ppp0
-),
-q(ifdown ppp0
-killall pppd
-), $netcnx->{type});
-    1;
-}
-
-sub pppConfig {
-    my ($modem, $mouse, $netc) = @_;
-
-    $mouse ||={};
-    $mouse->{device} ||= readlink "$prefix/dev/mouse";
-    $::isInstall and $in->set_help('selectSerialPort');
-    $modem->{device} ||= $in->ask_from_listf('', _("Please choose which serial port your modem is connected to."),
-					     \&mouse::serial_port2text,
-					     [ grep { $_ ne $mouse->{device} } (mouse::serial_ports, if_(-e '/dev/modem', '/dev/modem')) ]) || return;
-
-    $::isStandalone || $in->set_help('configureNetworkISP');
-    $in->ask_from('', _("Dialup options"), [
-{ label => _("Connection name"), val => \$modem->{connection} },
-{ label => _("Phone number"), val => \$modem->{phone} },
-{ label => _("Login ID"), val => \$modem->{login} },
-{ label => _("Password"), val => \$modem->{passwd}, hidden => 1 },
-{ label => _("Authentication"), val => \$modem->{auth}, list => [ __("PAP"), __("Terminal-based"), __("Script-based"), __("CHAP") ] },
-{ label => _("Domain name"), val => \$modem->{domain} },
-{ label => _("First DNS Server (optional)"), val => \$modem->{dns1} },
-{ label => _("Second DNS Server (optional)"), val => \$modem->{dns2} },
-    ]) or return;
-    $netc->{DOMAINNAME2} = $modem->{domain};
-    any::pppConfig($in, $modem, $prefix);
-    $netc->{$_}='ppp0' foreach 'NET_DEVICE', 'NET_INTERFACE';
-    1;
-}
-#-AT&F&O2B40
-#- DialString=ATDT0231389595((
-
-#- modem_detect_backend : detects modem on serial ports and fills the infos in $modem : detects only one card
-#- input
-#-  $modem
-#-  $mouse : facultative, hash containing device to exclude not to test mouse port : ( device => /ttyS[0-9]/ )
-#- output:
-#-  $modem->{device} : device where the modem were detected
-sub modem_detect_backend {
-    my ($modem, $mouse) = @_;
-    $mouse ||={};
-    $mouse->{device} ||= readlink "/dev/mouse";
-    my $serdev = arch() =~ /ppc/ ? "macserial" : "serial";
-    eval { modules::load("$serdev") };
-
-    detect_devices::probeSerialDevices();
-    foreach ('modem', map { "ttyS$_" } (0..7)) {
-	next if $mouse->{device} =~ /$_/;
-	next unless -e "/dev/$_";
-	detect_devices::hasModem("/dev/$_") and $modem->{device} = "$_", last;
-    }
-
-    #- add an alias for macserial on PPC
-    modules::add_alias('serial', $serdev) if (arch() =~ /ppc/ && $modem->{device});
-    my @devs = detect_devices::pcmcia_probe();
-    foreach (@devs) {
-	$_->{type} =~ /serial/ and $modem->{device} = $_->{device};
-    }
-
-}
-
-1;
diff --git a/perl-install/network/netconnect.pm b/perl-install/network/netconnect.pm
deleted file mode 100644
index ea8c1574b..000000000
--- a/perl-install/network/netconnect.pm
+++ /dev/null
@@ -1,595 +0,0 @@
-
-package network::netconnect;
-
-use diagnostics;
-use strict;
-use vars qw($isdn_init @isdndata);
-
-use common;
-use log;
-use detect_devices;
-use run_program;
-use modules;
-use any;
-use mouse;
-use network;
-
-use network::tools;
-use MDK::Common::Globals "network", qw($in $prefix $connect_file $disconnect_file $connect_prog);
-
-
-#- intro is called only in standalone.
-sub intro {
-    my ($prefix, $netcnx, $in) = @_;
-    my ($netc, $mouse, $intf) = ({}, {}, {});
-    my $text;
-    my $connected;
-    my $connect_file = "/etc/sysconfig/network-scripts/net_cnx_up";
-    my $disconnect_file = "/etc/sysconfig/network-scripts/net_cnx_down";
-    my $connect_prog = "/etc/sysconfig/network-scripts/net_cnx_pg";
-    read_net_conf($prefix, $netcnx, $netc);
-    if (!$::isWizard) {
-	if (connected()) {
-	    $text=_("You are currently connected to internet.") . (-e $disconnect_file ? _("\nYou can disconnect or reconfigure your connection.") : _("\nYou can reconfigure your connection."));
-	    $connected=1;
-	} else {
-	    $text=_("You are not currently connected to Internet.") . (-e $connect_file ? _("\nYou can connect to Internet or reconfigure your connection.") : _("\nYou can reconfigure your connection."));
-	    $connected=0;
-	}
-	my @l=(
-	       !$connected && -e $connect_file ? { description => _("Connect to Internet"),
-						   c => 1} : (),
-	       $connected && -e $disconnect_file ? { description => _("Disconnect from Internet"),
-						     c => 2} : (),
-	       { description => _("Configure network connection (LAN or Internet)"),
-		 c => 3},
-	      );
-	my $e = $in->ask_from_listf(_("Internet connection & configuration"),
-				    _($text),
-				    sub { $_[0]{description} },
-				    \@l );
-	run_program::rooted($prefix, $connect_prog) if ($e->{c}==1);
-	run_program::rooted($prefix, $disconnect_file) if ($e->{c}==2);
-	main($prefix, $netcnx, $netc, $mouse, $in, $intf, 0, 0) if ($e->{c}==3);
-    } else {
-	main($prefix, $netcnx, $netc, $mouse, $in, $intf, 0, 0);
-    }
-}
-
-sub detect {
-    my ($auto_detect, $net_install) = @_;
-    my $isdn={};
-    require network::isdn;
-    network::isdn->import;
-    isdn_detect_backend($isdn);
-    $auto_detect->{isdn}{$_}=$isdn->{$_} foreach qw(description vendor id driver card_type type);
-    $auto_detect->{isdn}{description} =~ s/.*\|//;
-
-    any::setup_thiskind_backend('net', undef);
-    require network::ethernet;
-    network::ethernet->import;
-    my @all_cards = conf_network_card_backend (undef, undef, undef, undef, undef, undef);
-    require network::adsl;
-    network::adsl->import;
-    map {
-	( !$net_install and adsl_detect($_->[0]) ) ? $auto_detect->{adsl}=$_->[0] : $auto_detect->{lan}{$_->[0]}=$_->[1]; } @all_cards;
-    my $modem={};
-    require network::modem;
-    network::modem->import;
-    modem_detect_backend($modem);#, $mouse);
-    $modem->{device} and $auto_detect->{modem}=$modem->{device};
-}
-
-sub pre_func {
-    my ($text) = @_;
-    $in->isa('interactive_gtk') or return;
-    $::Wizard_no_previous=1;
-    if ($::isStandalone) {
-	$::Wizard_splash=1;
-	require my_gtk;
-	my_gtk->import(qw(:wrappers));
-	my $W = my_gtk->new(_("Network Configuration Wizard"));
-	gtkadd($W->{window},
-	       gtkpack_(new Gtk::VBox(0, 0),
-			1, write_on_pixmap(gtkpng ("draknet_step"),
-					   20,200,
-					   _("We are now going to configure the %s connection.",_($text)),
-					  ),
-			0, $W->create_okcancel
-		       )
-	      );
-	$W->main;
-	$::Wizard_splash=0;
-    } else {
-	#- for i18n : %s is the type of connection of the list: (modem, isdn, adsl, cable, local network);
-	$in->ask_okcancel(_("Network Configuration Wizard"), _("\n\n\nWe are now going to configure the %s connection.\n\n\nPress OK to continue.",_($_[0])), 1);
-    }
-    undef $::Wizard_no_previous;
-}
-
-sub main {
-    my ($prefix, $netcnx, $netc, $mouse, $in, $intf, $first_time, $direct_fr, $noauto) = @_;
-    MDK::Common::Globals::init(
-		  in => $in,
-		  prefix => $prefix,
-		  connect_file => "/etc/sysconfig/network-scripts/net_cnx_up",
-		  disconnect_file => "/etc/sysconfig/network-scripts/net_cnx_down",
-		  connect_prog => "/etc/sysconfig/network-scripts/net_cnx_pg" );
-    $netc->{minus_one}=0; #When one configure an eth in dhcp without gateway
-    $::isInstall and $in->set_help('configureNetwork');
-    $::isStandalone and read_net_conf($prefix, $netcnx, $netc); # REDONDANCE with intro. FIXME
-    $netc->{NET_DEVICE}=$netcnx->{NET_DEVICE} if $netcnx->{NET_DEVICE}; # REDONDANCE with read_conf. FIXME
-    $netc->{NET_INTERFACE}=$netcnx->{NET_INTERFACE} if $netcnx->{NET_INTERFACE}; # REDONDANCE with read_conf. FIXME
-    network::read_all_conf($prefix, $netc ||= {}, $intf ||= {});
-
-    modules::mergein_conf("$prefix/etc/modules.conf");
-
-    my $direct_net_install;
-    if ($first_time && $::isInstall && ($in->{method} eq "ftp" || $in->{method} eq "http" || $in->{method} eq "nfs")) {
-	(!($::expert || $noauto) or $in->ask_okcancel(_("Network Configuration"),
-						      _("Because you are doing a network installation, your network is already configured.
-Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.
-"), 1)) and do {
-    output "$prefix$connect_file",
-      qq(
-ifup eth0
-);
-    output "$prefix$disconnect_file",
-      qq(
-ifdown eth0
-);
-    chmod 0755, "$prefix$disconnect_file";
-    chmod 0755, "$prefix$connect_file";
-    $direct_net_install = 1;
-    goto step_5;
-};
-    }
-
-    $netc->{autodetection}=1;
-    $netc->{autodetect}={};
-
-  step_1:
-    $::Wizard_no_previous=1;
-    my @profiles=get_profiles();
-    $in->ask_from(_("Network Configuration Wizard"),
-		  _("Welcome to The Network Configuration Wizard\n\nWe are about to configure your internet/network connection.\nIf you don't want to use the auto detection, deselect the checkbox.\n"),
-		  [
-		   if_(@profiles > 1, { label => _("Choose the profile to configure"), val => \$netcnx->{PROFILE}, list => \@profiles }),
-		   { label => _("Use auto detection"), val => \$netc->{autodetection}, type => 'bool' },
-		  ]
-		 ) or goto step_5;
-    undef $::Wizard_no_previous;
-    set_profile($netcnx);
-    if ($netc->{autodetection}) {
-	my $w = $in->wait_message(_("Network Configuration Wizard"), _("Detecting devices..."));
-	detect($netc->{autodetect}, $::isInstall && ($in->{method} eq "ftp" || $in->{method} eq "http" || $in->{method} eq "nfs"));
-    }
-
-  step_2:
-
-    my $set_default;
-    my %conf;
-    $conf{$_} = $netc->{autodetect}{$_} ? 1 : 0 foreach 'modem', 'adsl', 'cable', 'lan';
-    $conf{isdn} = $netc->{autodetect}{isdn}{description} ? 1: 0;
-    my @l = (
-	     [_("Normal modem connection"), $netc->{autodetect}{modem}, __("detected on port %s"), \$conf{modem}],
-	     [_("ISDN connection"), $netc->{autodetect}{isdn}{description}, __("detected %s"), \$conf{isdn}],
-	     [_("ADSL connection"), $netc->{autodetect}{adsl}, __("detected on interface %s"), \$conf{adsl}],
-	     [_("Cable connection"), $netc->{autodetect}{cable}, __("cable connection detected"), \$conf{cable}],
-	     [_("LAN connection"), $netc->{autodetect}{lan}, __("ethernet card(s) detected"), \$conf{lan}]
-	);
-    my $i=0;
-    map { defined $set_default or do { $_->[1] and $set_default=$i; }; $i++; } @l;
-    @l = (
-[_("Normal modem connection") . if_($netc->{autodetect}{modem}, " - " . _("detected on port %s", $netc->{autodetect}{modem})), \$conf{modem}],
-[_("ISDN connection") . if_($netc->{autodetect}{isdn}{description}, " - " . _("detected %s", $netc->{autodetect}{isdn}{description})), \$conf{isdn}],
-[_("ADSL connection") . if_($netc->{autodetect}{adsl}, " - " . _("detected on interface %s", $netc->{autodetect}{adsl})), \$conf{adsl}],
-[_("Cable connection") . if_($netc->{autodetect}{cable}, " - " . _("cable connection detected")), \$conf{cable}],
-[_("LAN connection") . if_($netc->{autodetect}{lan}, " - " . _("ethernet card(s) detected")), \$conf{lan}]
-);
-    my $e = $in->ask_from(_("Network Configuration Wizard"), _("Choose the connection you want to configure"),
-			  [ map { { label => $_->[0], val => $_->[1], type => 'bool' } } @l ],
-			  changed => sub {
-			      return if !$netc->{autodetection};
-			      my $c = 0;
-#-			      $conf{adsl} and $c++;
-			      $conf{cable} and $c++;
-			      my $a = keys(%{$netc->{autodetect}{lan}});
-			      0 < $a && $a <= $c and $conf{lan} = undef;
-			  }
-			 ) or goto step_1;
-
-#    load_conf ($netcnx, $netc, $intf);
-    $conf{modem} and do { pre_func("modem"); require network::modem; network::modem::configure($netcnx, $mouse, $netc) or goto step_2 };
-    $conf{isdn} and do { pre_func("isdn"); require network::isdn; network::isdn::configure($netcnx, $netc) or goto step_2 };
-    $conf{adsl} and do { pre_func("adsl"); require network::adsl; network::adsl::configure($netcnx, $netc, $intf, $first_time) or goto step_2};
-    $conf{cable} and do { pre_func("cable"); require network::ethernet; network::ethernet::configure_cable($netcnx, $netc, $intf, $first_time) or goto step_2; $netconnect::need_restart_network = 1; };
-    $conf{lan} and do { pre_func("local network"); require network::ethernet; network::ethernet::configure_lan($netcnx, $netc, $intf, $first_time) or goto step_2; $netconnect::need_restart_network = 1; };
-
-  step_2_1:
-    my $nb = keys %{$netc->{internet_cnx}};
-    if ($nb < 1) {
-    } elsif ($nb > 1) {
-	$in->ask_from(_("Network Configuration Wizard"),
-		      _("You have configured multiple ways to connect to the Internet.\nChoose the one you want to use.\n\n" . if_(!$::isStandalone, "You may want to configure some profiles after the installation, in the Mandrake Control Center")),
-		      [ { label => _("Internet connection"), val => \$netc->{internet_cnx_choice}, list => [ keys %{$netc->{internet_cnx}} ]} ]
-		     ) or goto step_2;
-    } elsif ($nb == 1) {
-	$netc->{internet_cnx_choice} = (keys %{$netc->{internet_cnx}})[0];
-    }
-    member($netc->{internet_cnx_choice}, ('modem', 'adsl', 'isdn')) and
-      $netc->{at_boot} = $in->ask_yesorno(_("Network Configuration Wizard"), _("Do you want to start the connection at boot?"));
-    if ($netc->{internet_cnx_choice} ) {
-	write_cnx_script($netc);
-	$netcnx->{type} = $netc->{internet_cnx}{$netc->{internet_cnx_choice}}{type};
-    } else {
-	unlink "$prefix/etc/sysconfig/network-scripts/net_cnx_up";
-	unlink "$prefix/etc/sysconfig/network-scripts/net_cnx_down";
-	undef $netc->{NET_DEVICE};
-    }
-
-    write_initscript();
-    $::isStandalone && member($netc->{internet_cnx_choice}, ('modem', 'adsl', 'isdn')) and ask_connect_now();
-
-  step_3:
-
-    network::configureNetwork2($in, $prefix, $netc, $intf);
-    my $network_configured = 1;
-
-    if ($netconnect::need_restart_network && $::isStandalone and ($::expert or $in->ask_yesorno(_("Network configuration"),
-							  _("The network needs to be restarted"), 1))) {
-#-	run_program::rooted($prefix, "/etc/rc.d/init.d/network stop");
-	if (!run_program::rooted($prefix, "/etc/rc.d/init.d/network restart")) {
-	    $in->ask_okcancel(_("Network Configuration"), _("A problem occured while restarting the network: \n\n%s", `/etc/rc.d/init.d/network restart`), 0) or return;
-	}
-    }
-
-    my $m = _("Congratulations, the network and internet configuration is finished.
-
-The configuration will now be applied to your system.\n") . if_($::isStandalone && $in->isa('interactive_gtk'),
-_("After that is done, we recommend you to restart your X
-environnement to avoid hostname changing problem."));
-    if ($::isWizard) {
-	$::Wizard_no_previous=1;
-	$::Wizard_finished=1;
-	$in->ask_okcancel(_("Network Configuration"), $m, 1);
-	undef $::Wizard_no_previous;
-	undef $::Wizard_finished;
-    } else {  $::isStandalone and $in->ask_warn('', $m ); }
-
-  step_5:
-
-    $network_configured or network::configureNetwork2($in, $prefix, $netc, $intf);
-
-    if ($netcnx->{type} =~ /modem/ || $netcnx->{type} =~ /isdn_external/) {
-	output "$prefix$connect_prog",
-	  qq(
-#!/bin/bash
-if [ -n "\$DISPLAY" ]; then
-if [ -e /usr/bin/kppp ]; then
-/usr/bin/kppp &
-else
-/usr/sbin/net_monitor --connect
-fi
-else
-$connect_file
-fi
-);
-    } elsif ($netcnx->{type}) {
-	output "$prefix$connect_prog",
-	  qq(
-#!/bin/bash
-if [ -n "\$DISPLAY" ]; then
-/usr/sbin/net_monitor --connect
-else
-$connect_file
-fi
-);
-    } else {
-	output "$prefix$connect_prog",
-	  qq(
-#!/bin/bash
-/usr/sbin/draknet
-);
-    }
-    if ($direct_net_install) {
-	output "$prefix$connect_prog",
-	  qq(
-#!/bin/bash
-if [ -n "\$DISPLAY" ]; then
-/usr/sbin/net_monitor --connect
-else
-$connect_file
-fi
-);
-    }
-    chmod 0755, "$prefix$connect_prog";
-    $netcnx->{$_}=$netc->{$_} foreach qw(NET_DEVICE NET_INTERFACE);
-
-    $netcnx->{NET_INTERFACE} and set_net_conf($netcnx, $netc);
-    $netcnx->{type} =~ /adsl/ or system("/sbin/chkconfig --del adsl 2> /dev/null");
-    save_conf($netcnx, $netc, $intf);
-
-#-    if ($netc->{NET_DEVICE} and $netc->{NETWORKING} ne 'no' and $::isStandalone and $::expert) {
-#-	  exists $netc->{nb_cards} or do {
-#-	      any::setup_thiskind($in, 'net', !$::expert, 1);
-#-	      $netc->{nb_cards} = listlength(detect_devices::getNet());
-#-	  };
-#-	  ($netc->{nb_cards} - $netc->{minus_one} - (get_net_device($prefix) =~ /eth.+/ ? 1 : 0) > 0) and $in->ask_okcancel(_("Network Configuration"),
-#-_("Now that your Internet connection is configured,
-#-your computer can be configured to share its Internet connection.
-#-Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN).
-#-
-#-Would you like to setup the Internet Connection Sharing?
-#-"), 1) and system("/usr/sbin/drakgw --direct");
-#-    }
-}
-
-sub save_conf {
-    my ($netcnx, $netc, $intf)=@_;
-    my $adsl;
-    my $modem;
-    my $isdn;
-    $netcnx->{type} =~ /adsl/ and $adsl=$netcnx->{$netcnx->{type}};
-    $netcnx->{type} eq 'isdn_external' || $netcnx->{type} eq 'modem' and $modem=$netcnx->{$netcnx->{type}};
-    $netcnx->{type} eq 'isdn_internal' and $isdn=$netcnx->{$netcnx->{type}};
-    any::setup_thiskind_backend('net', undef);
-    require network::ethernet;
-    network::ethernet->import;
-    my @all_cards = conf_network_card_backend ($netc, $intf, undef, undef, undef, undef);
-
-    $intf = { %$intf };
-
-    output("$prefix/etc/sysconfig/network-scripts/draknet_conf",
-      "SystemName=" . do { $netc->{HOSTNAME} =~ /([^\.]*)\./; $1 } . "
-DomainName=" . do { $netc->{HOSTNAME} =~ /\.(.*)/; $1 } . "
-InternetAccessType=" . do { if ($netcnx->{type}) { $netcnx->{type}; } else { $netc->{GATEWAY} ? "lan" : ""; } } . "
-InternetInterface=" . ($netc->{GATEWAY} && (!$netcnx->{type} || $netcnx->{type} eq 'lan') ? $netc->{NET_DEVICE} : $netcnx->{NET_INTERFACE}) . "
-InternetGateway=$netc->{GATEWAY}
-DNSPrimaryIP=$netc->{dnsServer}
-DNSSecondaryIP=$netc->{dnsServer2}
-DNSThirdIP=$netc->{dnsServer3}
-AdminInterface=
-
-" . join ('', map {
-"Eth${_}Known=" . ($intf->{"eth$_"}->{DEVICE} eq "eth$_" ? 'true' : 'false') . "
-Eth${_}IP=" . $intf->{"eth$_"}{IPADDR} . "
-Eth${_}Mask=" . $intf->{"eth$_"}{NETMASK} . "
-Eth${_}Mac=
-Eth${_}BootProto=" . $intf->{"eth$_"}{BOOTPROTO} . "
-Eth${_}OnBoot=" . $intf->{"eth$_"}{ONBOOT} . "
-Eth${_}Hostname=$netc->{HOSTNAME}
-Eth${_}HostAlias=" . do { $netc->{HOSTNAME} =~ /([^\.]*)\./; $1 } . "
-Eth${_}Driver=$all_cards[$_]->[1]
-Eth${_}Irq=
-Eth${_}Port=
-Eth${_}DHCPClient=" . ($intf->{"eth$_"}{BOOTPROTO} eq 'dhcp' ? $netcnx->{dhcp_client} : '') . "
-Eth${_}DHCPServerName=" . ($intf->{"eth$_"}{BOOTPROTO} eq 'dhcp' ? $netc->{HOSTNAME} : '') . "\n"
- } (0..9)) .
-"
-
-ISDNDriver=$isdn->{driver}
-ISDNDeviceType=$isdn->{type}
-ISDNIrq=$isdn->{irq}
-ISDNMem=$isdn->{mem}
-ISDNIo=$isdn->{io}
-ISDNIo0=$isdn->{io0}
-ISDNIo1=$isdn->{io1}
-ISDNProtocol=$isdn->{protocol}
-ISDNCardDescription=$isdn->{description}
-ISDNCardVendor=$isdn->{vendor}
-ISDNId=$isdn->{id}
-ISDNProvider=$netc->{DOMAINNAME2}
-ISDNProviderPhone=$isdn->{phone_out}
-ISDNProviderDomain=" . do { $netc->{DOMAINNAME2} =~ /\.(.*)/; $1} . "
-ISDNProviderDNS1=$netc->{dnsServer2}
-ISDNProviderDNS2=$netc->{dnsServer3}
-ISDNDialing=$isdn->{dialing_mode}
-ISDNSpeed=$isdn->{speed}
-ISDNTimeout=$isdn->{huptimeout}
-ISDNHomePhone=$isdn->{phone_in}
-ISDNLogin=$isdn->{login}
-ISDNPassword=$isdn->{passwd}
-ISDNConfirmPassword=$isdn->{passwd2}
-
-PPPInterfacesList=
-PPPDevice=$modem->{device}
-PPPDeviceSpeed=
-PPPConnectionName=$modem->{connection}
-PPPProviderPhone=$modem->{phone}
-PPPProviderDomain=$modem->{domain}
-PPPProviderDNS1=$modem->{dns1}
-PPPProviderDNS2=$modem->{dns2}
-PPPLogin=$modem->{login}
-PPPPassword=$modem->{passwd}
-PPPConfirmPassword=$modem->{passwd}
-PPPAuthentication=$modem->{auth}
-PPPSpecialCommand=" . ($netcnx->{type} eq 'isdn_external' ? $netcnx->{isdn_external}{special_command} : '' ) . "
-
-ADSLInterfacesList=
-ADSLModem=" .  q( # Obsolete information. Please don't use it.) . "
-ADSLType=" . ($netcnx->{type} =~ /adsl/ ? $netcnx->{type} : '') . "
-ADSLProviderDomain=$netc->{DOMAINNAME2}
-ADSLProviderDNS1=$netc->{dnsServer2}
-ADSLProviderDNS2=$netc->{dnsServer3}
-ADSLLogin=$adsl->{login}
-ADSLPassword=$adsl->{passwd}
-DOMAINNAME2=$netc->{DOMAINNAME2}"
-	  );
-    chmod 0600, "$prefix/etc/sysconfig/network-scripts/draknet_conf";
-    my $a = $netcnx->{PROFILE} ? $netcnx->{PROFILE} : "default";
-    cp_af("$prefix/etc/sysconfig/network-scripts/draknet_conf", "$prefix/etc/sysconfig/network-scripts/draknet_conf." . $a);
-    chmod 0600, "$prefix/etc/sysconfig/network-scripts/draknet_conf";
-    chmod 0600, "$prefix/etc/sysconfig/network-scripts/draknet_conf." . $a;
-    foreach ( ["$prefix$connect_file", "up"],
-	      ["$prefix$disconnect_file", "down"],
-	      ["$prefix$connect_prog", "prog"],
-	      ["$prefix/etc/ppp/ioptions1B", "iop1B"],
-	      ["$prefix/etc/ppp/ioptions2B", "iop2B"],
-	      ["$prefix/etc/isdn/isdn1B.conf", "isdn1B"],
-	      ["$prefix/etc/isdn/isdn2B.conf", "isdn2B"],
-	      ["$prefix/etc/resolv.conf", "resolv"],
-	      ["$prefix/etc/ppp/peers/adsl", "speedtouch"],
-	    ) {
-	my $file = "$prefix/etc/sysconfig/network-scripts/net_" . $_->[1] . "." . $a;
-	-e ($_->[0]) and cp_af($_->[0], $file) and chmod 0755, $file;
-    }
-}
-
-sub set_profile {
-    my ($netcnx, $profile) = @_;
-    $profile ||= $netcnx->{PROFILE};
-    $profile or return;
-    my $f = "$prefix/etc/sysconfig/network-scripts/draknet_conf";
-    -e ($f . "." . $profile) or return;
-    $netcnx->{PROFILE}=$profile;
-    cp_af($f . "." . $profile, $f);
-    foreach ( ["$prefix$connect_file", "up"],
-	      ["$prefix$disconnect_file", "down"],
-	      ["$prefix$connect_prog", "prog"],
-	      ["$prefix/etc/ppp/ioptions1B", "iop1B"],
-	      ["$prefix/etc/ppp/ioptions2B", "iop2B"],
-	      ["$prefix/etc/isdn/isdn1B.conf", "isdn1B"],
-	      ["$prefix/etc/isdn/isdn2B.conf", "isdn2B"],
-	      ["$prefix/etc/resolv.conf", "resolv"],
-	      ["$prefix/etc/ppp/peers/adsl", "speedtouch"],
-	    ) {
-	my $c = "$prefix/etc/sysconfig/network-scripts/net_" . $_->[1] . "." . $profile;
-	-e ($c) and cp_af($c, $_->[0]);
-    }
-}
-
-sub del_profile {
-    my ($netcnx, $profile) = @_;
-    $profile or return;
-    $profile eq "default" and return;
-    rm_rf("$prefix/etc/sysconfig/network-scripts/draknet_conf." . $profile);
-    rm_rf(glob_("$prefix/etc/sysconfig/network-scripts/net_{up,down,prog,iop1B,iop2B,isdn1B,isdn2B,resolv,speedtouch}." . $profile));
-}
-
-sub add_profile {
-    my ($netcnx, $profile) = @_;
-    $profile or return;
-    $profile eq "default" and return;
-    my $cmd1 = "$prefix/etc/sysconfig/network-scripts/draknet_conf." . ($netcnx->{PROFILE} ? $netcnx->{PROFILE} : "default");
-    my $cmd2 = "$prefix/etc/sysconfig/network-scripts/draknet_conf." . $profile;
-    cp_af($cmd1, $cmd2);
-}
-
-sub get_profiles {
-    my @a;
-    my $i=0;
-    foreach (glob("/etc/sysconfig/network-scripts/draknet_conf.*")) {
-	s/.*\.//;
-	$a[$i] = $_;
-	$i++;
-    }
-    @a;
-}
-
-sub load_conf {
-    my ($netcnx, $netc, $intf)=@_;
-    my $adsl_pptp={};
-    my $adsl_pppoe={};
-    my $modem={};
-    my $isdn_external={};
-    my $isdn={};
-    my $system_name;
-    my $domain_name;
-
-    if (-e "$prefix/etc/sysconfig/network-scripts/draknet_conf") {
-	foreach (cat_("$prefix/etc/sysconfig/network-scripts/draknet_conf")) {
-	    /^DNSPrimaryIP=(.*)$/ and $netc->{dnsServer} = $1;
-	    /^DNSSecondaryIP=(.*)$/ and $netc->{dnsServer2} = $1;
-	    /^DNSThirdIP=(.*)$/ and $netc->{dnsServer3} = $1;
-	    /^InternetAccessType=(.*)$/ and $netcnx->{type} = $1;
-	    /^InternetInterface=(.*)$/ and $netcnx->{NET_INTERFACE} = $1;
-	    /^InternetGateway=(.*)$/ and $netc->{GATEWAY} = $1;
-	    /^SystemName=(.*)$/ and $system_name = $1;
-	    /^DomainName=(.*)$/ and $domain_name = $1;
-	    /^Eth([0-9])Known=true$/ and $intf->{"eth$1"}->{DEVICE} = "eth$1";
-	    /^Eth([0-9])IP=(.*)$/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{IPADDR} = $2;
-	    /^Eth([0-9])Mask=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{NETMASK} = $2;
-	    /^Eth([0-9])BootProto=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{BOOTPROTO} = $2;
-	    /^Eth([0-9])OnBoot=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{ONBOOT} = $2;
-	    /^Eth([0-9])Hostname=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $netc->{HOSTNAME} = $2;
-	    /^Eth([0-9])Driver=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{driver} = $2;
-	    /^ISDNDriver=(.*)$/ and $isdn->{driver} = $1;
-	    /^ISDNDeviceType=(.*)$/ and $isdn->{type} = $1;
-	    /^ISDNIrq=(.*)/ and $isdn->{irq} = $1;
-	    /^ISDNMem=(.*)$/ and $isdn->{mem} = $1;
-	    /^ISDNIo=(.*)$/ and $isdn->{io} = $1;
-	    /^ISDNIo0=(.*)$/ and $isdn->{io0} = $1;
-	    /^ISDNIo1=(.*)$/ and $isdn->{io1} = $1;
-	    /^ISDNProtocol=(.*)$/ and $isdn->{protocol} = $1;
-	    /^ISDNCardDescription=(.*)$/ and $isdn->{description} = $1;
-	    /^ISDNCardVendor=(.*)$/ and $isdn->{vendor} = $1;
-	    /^ISDNId=(.*)$/ and $isdn->{id} = $1;
-	    /^ISDNProviderPhone=(.*)$/ and $isdn->{phone_out} = $1;
-	    /^ISDNDialing=(.*)$/ and $isdn->{dialing_mode} = $1;
-	    /^ISDNISDNSpeed=(.*)$/ and $isdn->{speed} = $1;
-	    /^ISDNTimeout=(.*)$/ and $isdn->{huptimeout} = $1;
-	    /^ISDNHomePhone=(.*)$/ and $isdn->{phone_in} = $1;
-	    /^ISDNLogin=(.*)$/ and $isdn->{login} = $1;
-	    /^ISDNPassword=(.*)$/ and $isdn->{passwd} = $1;
-	    /^ISDNConfirmPassword=(.*)$/ and $isdn->{passwd2} = $1;
-
-	    /^PPPDevice=(.*)$/ and $modem->{device} = $1;
-	    /^PPPConnectionName=(.*)$/ and $modem->{connection} = $1;
-	    /^PPPProviderPhone=(.*)$/ and $modem->{phone} = $1;
-	    /^PPPProviderDomain=(.*)$/ and $modem->{domain} = $1;
-	    /^PPPProviderDNS1=(.*)$/ and $modem->{dns1} = $1;
-	    /^PPPProviderDNS2=(.*)$/ and $modem->{dns2} = $1;
-	    /^PPPLogin=(.*)$/ and $modem->{login} = $1;
-	    /^PPPPassword=(.*)$/ and $modem->{passwd} = $1;
-	    /^PPPAuthentication=(.*)$/ and $modem->{auth} = $1;
-	    if (/^PPPSpecialCommand=(.*)$/) {
-		$netcnx->{type} eq 'isdn_external' and $netcnx->{$netcnx->{type}}{special_command} = $1;
-	    }
-	    /^ADSLLogin=(.*)$/ and $adsl_pppoe->{login} = $1;
-	    /^ADSLPassword=(.*)$/ and $adsl_pppoe->{passwd} = $1;
-	    /^DOMAINNAME2=(.*)$/ and $netc->{DOMAINNAME2} = $1;
-	}
-    }
-    $system_name && $domain_name and $netc->{HOSTNAME}=join ('.', $system_name, $domain_name);
-    $adsl_pptp->{$_}=$adsl_pppoe->{$_} foreach ('login', 'passwd', 'passwd2');
-    $isdn_external->{$_}=$modem->{$_} foreach ('device', 'connection', 'phone', 'domain', 'dns1', 'dns2', 'login', 'passwd', 'auth');
-    $netcnx->{adsl_pptp}=$adsl_pptp;
-    $netcnx->{adsl_pppoe}=$adsl_pppoe;
-    $netcnx->{modem}=$modem;
-    $netcnx->{modem}=$isdn_external;
-    $netcnx->{isdn_internal}=$isdn;
-    -e "$prefix/etc/sysconfig/network" and put_in_hash($netc,network::read_conf("$prefix/etc/sysconfig/network"));
-    foreach (glob_("$prefix/etc/sysconfig/ifcfg-*")) {
-	my $l = network::read_interface_conf($_);
-	$intf->{$l->{DEVICE}} = $l;
-    }
-    my $file = "$prefix/etc/resolv.conf";
-    if (-e $file) {
-	put_in_hash($netc, network::read_resolv_conf($file));
-    }
-}
-
-sub get_net_device {
-    ${{ getVarsFromSh("/etc/sysconfig/draknet") }}{NET_DEVICE};
-}
-
-sub read_net_conf {
-    my ($prefix, $netcnx, $netc)=@_;
-    add2hash($netcnx, { getVarsFromSh("$prefix/etc/sysconfig/draknet") });
-    $netc->{$_} = $netcnx->{$_} foreach 'NET_DEVICE', 'NET_INTERFACE';
-    $netcnx->{$netcnx->{type}}||={};
-    add2hash($netcnx->{$netcnx->{type}}, { getVarsFromSh("$prefix/etc/sysconfig/draknet." . $netcnx->{type}) });
-}
-
-sub set_net_conf {
-    my ($netcnx, $netc)=@_;
-    setVarsInShMode("$prefix/etc/sysconfig/draknet", 0600, $netcnx, "NET_DEVICE", "NET_INTERFACE", "type", "PROFILE" );
-    setVarsInShMode("$prefix/etc/sysconfig/draknet." . $netcnx->{type}, 0600, $netcnx->{$netcnx->{type}}); #- doesn't work, don't know why
-    setVarsInShMode("$prefix/etc/sysconfig/draknet.netc", 0600, $netc); #- doesn't work, don't know why
-}
-
-#---------------------------------------------
-#                WONDERFULL pad
-#---------------------------------------------
-1;
diff --git a/perl-install/network/network.pm b/perl-install/network/network.pm
deleted file mode 100644
index 32642fdec..000000000
--- a/perl-install/network/network.pm
+++ /dev/null
@@ -1,446 +0,0 @@
-package network::network; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use Socket;
-
-use common;
-use detect_devices;
-use run_program;
-use any;
-use log;
-use vars qw(@ISA @EXPORT);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(resolv configureNetworkIntf netmask dns is_ip masked_ip findIntf addDefaultRoute all write_interface_conf read_all_conf dnsServers guessHostname configureNetworkNet read_resolv_conf getVarsFromSh read_interface_conf add2hosts gateway configureNetwork2 write_conf sethostname miscellaneousNetwork down_it read_conf write_resolv_conf up_it);
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub read_conf {
-    my ($file) = @_;
-    my %netc = getVarsFromSh($file);
-    \%netc;
-}
-
-sub read_resolv_conf {
-    my ($file) = @_;
-    my @l = qw(dnsServer dnsServer2 dnsServer3);
-    my %netc;
-
-    local *F; open F, $file or die "cannot open $file: $!";
-    local $_;
-    while (<F>) {
-	/^\s*nameserver\s+(\S+)/ and $netc{shift @l} = $1;
-    }
-    \%netc;
-}
-
-sub read_interface_conf {
-    my ($file) = @_;
-    my %intf = getVarsFromSh($file) or die "cannot open file $file: $!";
-
-    $intf{BOOTPROTO} ||= 'static';
-    $intf{isPtp} = $intf{NETWORK} eq '255.255.255.255';
-    $intf{isUp} = 1;
-    \%intf;
-}
-
-sub up_it {
-    my ($prefix, $intfs) = @_;
-    $_->{isUp} and return foreach values %$intfs;
-    my $f = "/etc/resolv.conf"; symlink "$prefix/$f", $f;
-    run_program::rooted($prefix, "/etc/rc.d/init.d/network", "start");
-    $_->{isUp} = 1 foreach values %$intfs;
-}
-sub down_it {
-    my ($prefix, $intfs) = @_;
-    run_program::rooted($prefix, "/etc/rc.d/init.d/network", "stop");
-    $_->{isUp} = 1 foreach values %$intfs;
-}
-
-sub write_conf {
-    my ($file, $netc) = @_;
-
-    add2hash($netc, {
-		     NETWORKING => "yes",
-		     FORWARD_IPV4 => "false",
-		     HOSTNAME => "localhost.localdomain",
-		    });
-   ($netc->{DOMAINNAME}) = ($netc->{HOSTNAME} =~ /\.(.*)/);
-
-    setVarsInSh($file, $netc, qw(NETWORKING FORWARD_IPV4 DHCP_HOSTNAME HOSTNAME DOMAINNAME GATEWAY GATEWAYDEV NISDOMAIN));
-}
-
-sub write_resolv_conf {
-    my ($file, $netc) = @_;
-
-    #- get the list of used dns.
-    my %used_dns; @used_dns{$netc->{dnsServer}, $netc->{dnsServer2}, $netc->{dnsServer3}} = (1, 2, 3);
-
-    unless ($netc->{DOMAINNAME} || $netc->{DOMAINNAME2} || keys %used_dns > 0) {
-	unlink($file);
-	log::l("neither domain name nor dns server are configured");
-	return 0;
-    }
-
-    my (%search, %dns, @unknown);
-    local *F; open F, $file;
-    local $_;
-#-    my $options;
-    while (<F>) {
-#-	if (/^[\s]*(options\s+[^#]*).*$/) { $options = $1; $options =~ s/timeout:\d+/timeout:1/; next }
-	/^[#\s]*search\s+(.*?)\s*$/ and $search{$1} = $., next;
-	/^[#\s]*nameserver\s+(.*?)\s*$/ and $dns{$1} = $., next;
-	/^.*# ppp temp entry\s*$/ and next;
-	/^[#\s]*(\S.*?)\s*$/ and push @unknown, $1;
-    }
-#-    $options ||= "options timeout:1";
-
-    close F; open F, ">$file" or die "cannot write $file: $!";
-    print F "# search $_\n" foreach grep { $_ ne "$netc->{DOMAINNAME} $netc->{DOMAINNAME2}" } sort { $search{$a} <=> $search{$b} } keys %search;
-    print F "search $netc->{DOMAINNAME} $netc->{DOMAINNAME2}\n" if ($netc->{DOMAINNAME} || $netc->{DOMAINNAME2});
-#-    print F "$options\n\n";
-    print F "# nameserver $_\n" foreach grep { ! exists $used_dns{$_} } sort { $dns{$a} <=> $dns{$b} } keys %dns;
-    print F "nameserver $_\n" foreach  sort { $used_dns{$a} <=> $used_dns{$b} } grep { $_ } keys %used_dns;
-    print F "\n";
-    print F "# $_\n" foreach @unknown;
-    print F "\n";
-    print F "# ppp temp entry\n";
-
-    #-res_init();		# reinit the resolver so DNS changes take affect
-    1;
-}
-
-sub write_interface_conf {
-    my ($file, $intf, $prefix) = @_;
-
-    my @ip = split '\.', $intf->{IPADDR};
-    my @mask = split '\.', $intf->{NETMASK};
-    my $hwaddr;
-    $::o->{miscellaneous}{track_network_id} and $hwaddr = -e "$prefix/sbin/ip" && `LC_ALL= LANG= $prefix/sbin/ip -o link show $intf->{DEVICE} 2>/dev/null`;
-    if ($hwaddr) { chomp $hwaddr; $hwaddr =~ s/.*link\/ether\s([0-9a-z:]+)\s.*/$1/; }
-    add2hash($intf, {
-		     BROADCAST => join('.', mapn { int $_[0] | ~int $_[1] & 255 } \@ip, \@mask),
-		     NETWORK   => join('.', mapn { int $_[0] &      $_[1]       } \@ip, \@mask),
-		     ONBOOT => bool2yesno(!member($intf->{DEVICE}, map { $_->{device} } detect_devices::probeall())),
-		     if_($::o->{miscellaneous}{track_network_id}, HWADDR => $hwaddr)
-		    });
-    setVarsInSh($file, $intf, qw(DEVICE BOOTPROTO IPADDR NETMASK NETWORK BROADCAST ONBOOT HWADDR), ($intf->{wireless_eth}) ? qw(WIRELESS_MODE WIRELESS_ESSID WIRELESS_NWID WIRELESS_FREQ WIRELESS_SENS WIRELESS_RATE WIRELESS_ENC_KEY WIRELESS_RTS WIRELESS_FRAG WIRELESS_IWCONFIG WIRELESS_IWSPY WIRELESS_IWPRIV) : ());
-}
-
-sub add2hosts {
-    my ($file, $hostname, @ips) = @_;
-    my %l;
-    $l{$_} = $hostname foreach @ips;
-
-    local *F;
-    if (-e $file) {
-	open F, $file or die "cannot open $file: $!";
-	/\s*(\S+)(.*)/ and $l{$1} ||= $2 foreach <F>;
-    }
-    log::l("writing host information to $file");
-    open F, ">$file" or die "cannot write $file: $!";
-    while (my ($ip, $v) = each %l) {
-	$ip or next;
-	print F "$ip";
-	if ($v =~ /^\s/) {
-	    print F $v;
-	} else {
-	    print F "\t\t$v";
-	    print F " $1" if $v =~ /(.*?)\./;
-	}
-	print F "\n";
-    }
-}
-
-# The interface/gateway needs to be configured before this will work!
-sub guessHostname {
-    my ($prefix, $netc, $intf) = @_;
-
-    $intf->{isUp} && dnsServers($netc) or return 0;
-    $netc->{HOSTNAME} && $netc->{DOMAINNAME} and return 1;
-
-    write_resolv_conf("$prefix/etc/resolv.conf", $netc);
-
-    my $name = gethostbyaddr(Socket::inet_aton($intf->{IPADDR}), AF_INET) or log::l("reverse name lookup failed"), return 0;
-
-    log::l("reverse name lookup worked");
-
-    add2hash($netc, { HOSTNAME => $name });
-    1;
-}
-
-sub addDefaultRoute {
-    my ($netc) = @_;
-    c::addDefaultRoute($netc->{GATEWAY}) if $netc->{GATEWAY};
-}
-
-sub sethostname {
-    my ($netc) = @_;
-    syscall_('sethostname', $netc->{HOSTNAME}, length $netc->{HOSTNAME}) or log::l("sethostname failed: $!");
-}
-
-sub resolv($) {
-    my ($name) = @_;
-    is_ip($name) and return $name;
-    my $a = join(".", unpack "C4", (gethostbyname $name)[4]);
-    #-log::l("resolved $name in $a");
-    $a;
-}
-
-sub dnsServers {
-    my ($netc) = @_;
-    my %used_dns; @used_dns{$netc->{dnsServer}, $netc->{dnsServer2}, $netc->{dnsServer3}} = (1, 2, 3);
-    sort { $used_dns{$a} <=> $used_dns{$b} } grep { $_ } keys %used_dns;
-}
-
-sub findIntf {
-    my ($intf, $device) = @_;
-    $intf->{$device}->{DEVICE} = $device;
-    $intf->{$device};
-}
-#PAD \s* a la fin
-my $ip_regexp = qr/^(\d{1,3})\.(\d{1,3})\.(\d{1,3})\.(\d{1,3})$/;
-sub is_ip {
-    my ($ip) = @_;
-    return 0 unless $ip =~ $ip_regexp;
-    my @fields = ($1, $2, $3, $4);
-    foreach (@fields) {
-	return 0 if $_ < 0 || $_ > 255;
-    }
-    return 1;
-}
-
-sub netmask {
-    my ($ip) = @_;
-    return "255.255.255.0" unless is_ip($ip);
-    $ip =~ $ip_regexp;
-    if ($1 >= 1 && $1 < 127) {
-	return "255.0.0.0";    #-1.0.0.0 to 127.0.0.0
-    } elsif ($1  >= 128 && $1 <= 191 ){
-	return "255.255.0.0";  #-128.0.0.0 to 191.255.0.0
-    } elsif ($1 >= 192 && $1 <= 223) {
-	return "255.255.255.0";
-    } else {
-	return "255.255.255.255"; #-experimental classes
-    }
-}
-
-sub masked_ip {
-    my ($ip) = @_;
-    return "" unless is_ip($ip);
-    my @mask = netmask($ip) =~ $ip_regexp;
-    my @ip   = $ip          =~ $ip_regexp;
-    for (my $i = 0; $i < @ip; $i++) {
-	$ip[$i] &= int $mask[$i];
-    }
-    join(".", @ip);
-}
-
-sub dns {
-    my ($ip) = @_;
-    my $mask = masked_ip($ip);
-    my @masked = masked_ip($ip) =~ $ip_regexp;
-    $masked[3]  = 2;
-    join (".", @masked);
-
-}
-sub gateway {
-    my ($ip) = @_;
-    my @masked = masked_ip($ip) =~ $ip_regexp;
-    $masked[3]  = 1;
-    join (".", @masked);
-
-}
-
-sub configureNetworkIntf {
-    my ($netc, $in, $intf, $net_device, $skip, $module) = @_;
-    my $text;
-    my @wireless_modules = ("airo_cs", "netwave_cs", "ray_cs", "wavelan_cs", "wvlan_cs");
-    if (member($module, @wireless_modules)) {
-	$intf->{wireless_eth} = 1;
-	$netc->{wireless_eth} = 1;
-	$intf->{WIRELESS_MODE} = "Managed";
-	$intf->{WIRELESS_ESSID} = "any";
-#-	$intf->{WIRELESS_NWID} = "";
-#-	$intf->{WIRELESS_FREQ} = "";
-#-	$intf->{WIRELESS_SENS} = "";
-#-	$intf->{WIRELESS_RATE} = "";
-#-	$intf->{WIRELESS_ENC_KEY} = "";
-#-	$intf->{WIRELESS_RTS} = "";
-#-	$intf->{WIRELESS_FRAG} = "";
-#-	$intf->{WIRELESS_IWCONFIG} = "";
-#-	$intf->{WIRELESS_IWSPY} = "";
-#-	$intf->{WIRELESS_IWPRIV} = "";
-    }
-    if ($net_device eq $intf->{DEVICE}) {
-	$skip and return 1;
-	$text = _("WARNING: This device has been previously configured to connect to the Internet.
-Simply accept to keep this device configured.
-Modifying the fields below will override this configuration.");
-    }
-    else {
-	$text = _("Please enter the IP configuration for this machine.
-Each item should be entered as an IP address in dotted-decimal
-notation (for example, 1.2.3.4).");
-    }
-    my $pump = $intf->{BOOTPROTO} =~ /^(dhcp|bootp)$/;
-    delete $intf->{NETWORK};
-    delete $intf->{BROADCAST};
-    my @fields = qw(IPADDR NETMASK);
-    $::isStandalone or $in->set_help('configureNetworkIP');
-    $in->ask_from(_("Configuring network device %s", $intf->{DEVICE}),
-  	          (_("Configuring network device %s", $intf->{DEVICE}) . ( $module ? _(" (driver %s)", $module) : '' ) ."\n\n") .
-	          $text,
-	         [ { label => _("IP address"), val => \$intf->{IPADDR}, disabled => sub { $pump } },
-	           { label => _("Netmask"),     val => \$intf->{NETMASK}, disabled => sub { $pump } },
-	           { label => _("Automatic IP"), val => \$pump, type => "bool", text => _("(bootp/dhcp)") },
-		   if_($intf->{wireless_eth},
-	           { label => "WIRELESS_MODE", val => \$intf->{WIRELESS_MODE}, list => [ "Ad-hoc", "Managed", "Master", "Repeater", "Secondary", "Auto"] },
-	           { label => "WIRELESS_ESSID", val => \$intf->{WIRELESS_ESSID} },
-	           { label => "WIRELESS_NWID", val => \$intf->{WIRELESS_NWID} },
-	           { label => "WIRELESS_FREQ", val => \$intf->{WIRELESS_FREQ} },
-	           { label => "WIRELESS_SENS", val => \$intf->{WIRELESS_SENS} },
-	           { label => "WIRELESS_RATE", val => \$intf->{WIRELESS_RATE} },
-	           { label => "WIRELESS_ENC_KEY", val => \$intf->{WIRELESS_ENC_KEY} },
-	           { label => "WIRELESS_RTS", val => \$intf->{WIRELESS_RTS} },
-	           { label => "WIRELESS_FRAG", val => \$intf->{WIRELESS_FRAG} },
-	           { label => "WIRELESS_IWCONFIG", val => \$intf->{WIRELESS_IWCONFIG} },
-	           { label => "WIRELESS_IWSPY", val => \$intf->{WIRELESS_IWSPY} },
-	           { label => "WIRELESS_IWPRIV", val => \$intf->{WIRELESS_IWPRIV} }
-	           ),
-	         ],
-	         complete => sub {
-	         	 $intf->{BOOTPROTO} = $pump ? "dhcp" : "static";
-	         	 return 0 if $pump;
-	         	 for (my $i = 0; $i < @fields; $i++) {
-	         	     unless (is_ip($intf->{$fields[$i]})) {
-	         		 $in->ask_warn('', _("IP address should be in format 1.2.3.4"));
-	         		 return (1,$i);
-	         	     }
-	         	     return 0;
-	         	 }
-	         	 if ($intf->{WIRELESS_FREQ} !~ /[0-9.]*[kGM]/) {
-	         	     $in->ask_warn('', _('Freq should have the suffix k, M or G (for example, "2.46G" for 2.46 GHz frequency), or add enough \'0\'.'));
-	         	     return (1,6);
-	         	 }
-	         	 if ($intf->{WIRELESS_RATE} !~ /[0-9.]*[kGM]/) {
-	         	     $in->ask_warn('', _('Rate should have the suffix k, M or G (for example, "11M" for 11M), or add enough \'0\'.'));
-	         	     return (1,8);
-	         	 }
-	         },
-	         focus_out => sub {
-	         	 $intf->{NETMASK} ||= netmask($intf->{IPADDR}) unless $_[0]
-	         }
-    	    );
-}
-
-sub configureNetworkNet {
-    my ($in, $netc, $intf, @devices) = @_;
-
-    $netc->{dnsServer} ||= dns($intf->{IPADDR});
-    $netc->{GATEWAY}   ||= gateway($intf->{IPADDR});
-
-    $::isInstall and $in->set_help('configureNetworkHost');
-    $in->ask_from(_("Configuring network"),
-_("Please enter your host name.
-Your host name should be a fully-qualified host name,
-such as ``mybox.mylab.myco.com''.
-You may also enter the IP address of the gateway if you have one"),
-			       [ { label => _("Host name"), val => \$netc->{HOSTNAME} },
-				 { label => _("DNS server"), val => \$netc->{dnsServer} },
-				 { label => _("Gateway"), val => \$netc->{GATEWAY} },
-				    if_(@devices > 1,
-				 { label => _("Gateway device"), val => \$netc->{GATEWAYDEV}, list => \@devices },
-				    ),
-			       ],
-			      );
-}
-
-sub miscellaneousNetwork {
-    my ($in, $clicked) = @_;
-    my $u = $::o->{miscellaneous} ||= {};
-    $::isInstall and $in->set_help('configureNetworkProxy');
-    $u->{track_network_id} = detect_devices::isLaptop();
-    $::expert || $clicked and $in->ask_from('',
-       _("Proxies configuration"),
-       [ { label => _("HTTP proxy"), val => \$u->{http_proxy} },
-         { label => _("FTP proxy"),  val => \$u->{ftp_proxy} },
-	 { label => _("Track network card id (usefull for laptops)"), val => \$u->{track_network_id}, type => "bool" },
-       ],
-       complete => sub {
-	   $u->{http_proxy} =~ m,^($|http://), or $in->ask_warn('', _("Proxy should be http://...")), return 1,0;
-	   $u->{ftp_proxy} =~ m,^($|ftp://), or $in->ask_warn('', _("Proxy should be ftp://...")), return 1,1;
-	   0;
-       }
-    ) || return;
-}
-
-sub read_all_conf {
-    my ($prefix, $netc, $intf) = @_;
-    $netc ||= {}; $intf ||= {};
-    add2hash($netc, read_conf("$prefix/etc/sysconfig/network")) if -r "$prefix/etc/sysconfig/network";
-    add2hash($netc, read_resolv_conf("$prefix/etc/resolv.conf")) if -r "$prefix/etc/resolv.conf";
-    foreach (all("$prefix/etc/sysconfig/network-scripts")) {
-	if (/ifcfg-(\w+)/ && $1 ne 'lo' && $1 !~ /ppp/) {
-	    my $intf = findIntf($intf, $1);
-	    add2hash($intf, { getVarsFromSh("$prefix/etc/sysconfig/network-scripts/$_") });
-	}
-    }
-}
-
-#- configureNetwork2 : configure the network interfaces.
-#- input
-#-  $prefix
-#-  $netc
-#-  $intf
-#- $netc input
-#-  NETWORKING : networking flag : string : "yes" by default
-#-  FORWARD_IPV4 : forward IP flag : string : "false" by default
-#-  HOSTNAME : hostname : string : "localhost.localdomain" by default
-#-  DOMAINNAME : domainname : string : $netc->{HOSTNAME} =~ /\.(.*)/ by default
-#-  DOMAINNAME2 : well it's another domainname : have to look further why we used 2
-#-  The following are facultatives
-#-  DHCP_HOSTNAME : If you have a dhcp and want to set the hostname
-#-  GATEWAY : gateway
-#-  GATEWAYDEV : gateway interface
-#-  NISDOMAIN : nis domain
-#-  $netc->{dnsServer} : dns server 1
-#-  $netc->{dnsServer2} : dns server 2
-#-  $netc->{dnsServer3} : dns server 3 : note that we uses the dns1 for the LAN, and the 2 others for the internet conx
-#- $intf input: for each $device (for example ethx)
-#-  $intf->{$device}{IPADDR} : IP address
-#-  $intf->{$device}{NETMASK} : netmask
-#-  $intf->{$device}{DEVICE} : DEVICE = $device
-#-  $intf->{$device}{BOOTPROTO} : boot prototype : "bootp" or "dhcp" or "pump" or ...
-sub configureNetwork2 {
-    my ($in, $prefix, $netc, $intf) = @_;
-    my $etc = "$prefix/etc";
-
-    $netc->{wireless_eth} and $in->do_pkgs->install('wireless-tools');
-    write_conf("$etc/sysconfig/network", $netc);
-    write_resolv_conf("$etc/resolv.conf", $netc);
-    write_interface_conf("$etc/sysconfig/network-scripts/ifcfg-$_->{DEVICE}", $_, $prefix) foreach grep { $_->{DEVICE} } values %$intf;
-    add2hosts("$etc/hosts", $netc->{HOSTNAME}, map { $_->{IPADDR} } values %$intf);
-
-    if (grep { $_->{BOOTPROTO} =~ /^(dhcp)$/ } values %$intf) {
-	$in->do_pkgs->install($netc->{dhcp_client} ? $netc->{dhcp_client} : 'dhcpcd');
-    }
-    if (grep { $_->{BOOTPROTO} =~ /^(pump|bootp)$/ } values %$intf) {
-	$in->do_pkgs->install('pump');
-    }
-    #-res_init();		#- reinit the resolver so DNS changes take affect
-
-    any::miscellaneousNetwork($prefix);
-}
-
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/network/nfs.pm b/perl-install/network/nfs.pm
deleted file mode 100644
index f4a153665..000000000
--- a/perl-install/network/nfs.pm
+++ /dev/null
@@ -1,43 +0,0 @@
-package network::nfs;
-
-use common;
-use network::network;
-use log;
-
-sub check {
-    my ($in) = @_;
-
-    my $f = '/usr/sbin/showmount';
-    -e $f or $in->do_pkgs->install('nfs-utils-clients');
-    -e $f or $in->ask_warn('', "Mandatory package nfs-utils-clients is missing"), return;
-    1;
-}
-
-
-sub find_servers() {
-    local (*F, $_);
-    my $pid = open F, "rpcinfo-flushed -b mountd 2 |";
-    $SIG{ALRM} = sub { kill(15, $pid) };
-    alarm 1;
-
-    my $domain = chomp_(`domainname`);
-    my @servers;
-    while (<F>) {
-	chomp;
-	my ($ip, $name) = /(\S+)\s+(\S+)/ or log::l("bad line in rpcinfo output"), next;
-	$name =~ s/\Q.$domain//; 
-	$name =~ s/\.$//;
-	push @servers, { ip => $ip, if_($name ne '(unknown)', name => $name) };
-    }
-    @servers;
-}
-
-sub find_exports {
-    my ($server) = @_;
-
-    my (undef, @l) = `showmount -e $server->{ip}`;
-    map { /(\S+)\s*(\S+)/; { name => $1, comment => $2 } } @l;
-}
-
-1;
-
diff --git a/perl-install/network/smb.pm b/perl-install/network/smb.pm
deleted file mode 100644
index d5c128b41..000000000
--- a/perl-install/network/smb.pm
+++ /dev/null
@@ -1,57 +0,0 @@
-package network::smb;
-
-use common;
-use network::network;
-
-sub check {
-    my ($in) = @_;
-    my $f = '/usr/bin/nmblookup';
-    -e $f or $in->do_pkgs->install('samba-client');
-    -e $f or $in->ask_warn('', "Mandatory package samba-client is missing"), return;
-    1;
-}
-
-
-sub find_servers() {
-    my (undef, @l) = `nmblookup "*"`;
-    s/\s.*\n// foreach @l;
-    my @servers = grep { network::network::is_ip($_) } @l;
-    my %servers;
-    $servers{$_}{ip} = $_ foreach @servers;
-    my ($ip);
-    foreach (`nmblookup -A @servers`) {
-	if (my $nb = /^Looking up status of (\S+)/ .. /^$/) {
-	    if ($nb == 1) {
-		$ip = $1;
-	    } else {
-		/<00>/ or next;
-		$servers{$ip}{/<GROUP>/ ? 'group' : 'name'} ||= lc first(/(\S+)/);
-	    }
-	}
-    }
-    values %servers;
-}
-
-sub find_exports {
-    my ($server) = @_;
-    my @l;
-    my $name  = $server->{name}  ? " -L $server->{name}"  : '';
-    my $group = $server->{group} ? " -W $server->{group}" : '';
-
-    # WARNING: using smbclient -L is ugly. It can't handle more than 15
-    # characters shared names
-
-    foreach (`smbclient -U% -L -I $server->{ip}$name$group`) {
-	chomp;
-	s/^\t//;
-	my ($name, $type, $comment) = unpack "A15 A10 A*", $_;
-	if ($name eq '---------' && $type eq '----' && $comment eq '-------' .. /^$/) {
-	    push @l, { name => $name, type => $type, comment => $comment }
-	      if $type eq 'Disk' && $name ne 'ADMIN$';
-	}
-    }
-    @l;
-}
-
-1;
-
diff --git a/perl-install/network/tools.pm b/perl-install/network/tools.pm
deleted file mode 100644
index 33c4f300c..000000000
--- a/perl-install/network/tools.pm
+++ /dev/null
@@ -1,204 +0,0 @@
-package network::tools;
-
-use common;
-use run_program;
-use c;
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix $disconnect_file $connect_prog $connect_file $disconnect_file);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(write_cnx_script write_secret_backend write_initscript ask_connect_now connect_backend disconnect_backend read_providers_backend ask_info2 type2interface connected connected_bg connected2 disconnected);
-@EXPORT_OK = qw($in);
-
-sub write_cnx_script {
-    my ($netc, $type, $up, $down, $type2) = @_;
-    if ($type) {
-	$netc->{internet_cnx}{$type}{$_->[0]}=$_->[1] foreach ([$connect_file, $up], [$disconnect_file, $down]);
-	$netc->{internet_cnx}{$type}{type} = $type2;
-    } else {
-	foreach ($connect_file, $disconnect_file) {
-	    output ("$prefix$_",
-'#!/bin/bash
-' . if_(!$netc->{at_boot}, 'if [ "x$1" == "x--boot_time" ]; then exit; fi
-') . $netc->{internet_cnx}{$netc->{internet_cnx_choice}}{$_});
-	chmod 0755, "$prefix" . $_;
-	}
-    }
-}
-
-sub write_secret_backend {
-    my ($a, $b) = @_;
-    foreach my $i ("pap-secrets", "chap-secrets") {
-	substInFile { s/^'$a'.*\n//; $_ .= "\n'$a' * '$b' * \n" if eof  } "$prefix/etc/ppp/$i";
-    }
-}
-
-sub ask_connect_now {
-    $::Wizard_no_previous=1;
-    #- FIXME : code the exception to be generated by ask_yesorno, to be able to remove the $::Wizard_no_previous=1;
-    if ($in->ask_yesorno(_("Internet configuration"),
-			 _("Do you want to try to connect to the Internet now?")
-			)) {
-	my $up;
-	{
-	    my $w = $in->wait_message('', _("Testing your connection..."), 1);
-	    connect_backend();
-	    sleep 10;
-	    my $netc = {};
-	    $up=connected();
-	}
-	my $m = $up ? (_("The system is now connected to Internet.") .
-		     if_($::isInstall, _("For Security reason, it will be disconnected now.")) ) :
-		       _("The system doesn't seem to be connected to internet.
-Try to reconfigure your connection.");
-	if ($::isWizard) {
-	    $::Wizard_no_previous=1;
-	    $::Wizard_finished=1;
-	    $in->ask_okcancel(_("Network Configuration"), $m, 1);
-	    undef $::Wizard_no_previous;
-	    undef $::Wizard_finished;
-	} else {  $in->ask_warn('', $m ); }
-	$::isInstall and disconnect_backend();
-    }
-    undef $::Wizard_no_previous;
-    1;
-}
-
-sub connect_backend { run_program::rooted($prefix, "$connect_prog &") }
-
-sub disconnect_backend { run_program::rooted($prefix, "$disconnect_file &") }
-
-sub read_providers_backend { my ($file) = @_; map { /(.*?)=>/ } catMaybeCompressed($file) }
-
-sub ask_info2 {
-    my ($cnx, $netc) = @_;
-    $::isInstall and $in->set_help('configureNetworkDNS');
-    $in->ask_from(_("Connection Configuration"),
-		  _("Please fill or check the field below"),
-		  [
-		   if__($cnx->{irq}, { label => _("Card IRQ"), val => \$cnx->{irq} })  ,
-		   if__($cnx->{mem}, { label => _("Card mem (DMA)"), val => \$cnx->{mem} }),
-		   if__($cnx->{io}, { label => _("Card IO"), val => \$cnx->{io} }),
-		   if__($cnx->{io0}, { label => _("Card IO_0"), val => \$cnx->{io0} }),
-		   if__($cnx->{io1}, { label => _("Card IO_1"), val => \$cnx->{io1} }),
-		   if__($cnx->{phone_in}, { label => _("Your personal phone number"), val => \$cnx->{phone_in} }),
-		   if__($netc->{DOMAINNAME2}, { label => _("Provider name (ex provider.net)"), val => \$netc->{DOMAINNAME2} }),
-		   if__($cnx->{phone_out}, { label => _("Provider phone number"), val => \$cnx->{phone_out} }),
-		   if__($netc->{dnsServer2}, { label => _("Provider dns 1 (optional)"), val => \$netc->{dnsServer2} }),
-		   if__($netc->{dnsServer3}, { label => _("Provider dns 2 (optional)"), val => \$netc->{dnsServer3} }),
-		   if__($cnx->{vpivci}, { label => _("Choose your country"), val => \$netc->{vpivci}, list => ['Netherlands', 'France', 'Belgium', 'Italy', 'UK', 'USA'] }),
-		   if__($cnx->{dialing_mode}, { label => _("Dialing mode"), val => \$cnx->{dialing_mode},list=>["auto","manual"]}),
-		   if__($cnx->{speed}, { label => _("Connection speed"), val => \$cnx->{speed}, list => ["64 Kb/s", "128 Kb/s"]}),
-		   if__($cnx->{huptimeout}, { label => _("Connection timeout (in sec)"), val => \$cnx->{huptimeout} }),
-		   if__($cnx->{login}, { label => _("Account Login (user name)"), val => \$cnx->{login} }),
-		   if__($cnx->{passwd}, { label => _("Account Password"),  val => \$cnx->{passwd} }),
-		  ]
-		 ) or return;
-    if ($netc->{vpivci}) {
-	foreach (['Netherlands', '8_48'], ['France', '8_35'], ['Belgium', '8_35'], ['Italy', '8_35'], ['UK', '0_38'], ['USA', '8_35']) {
-	    $netc->{vpivci} eq $_->[0] and $netc->{vpivci} = $_->[1];
-	}
-    }
-    1;
-}
-
-sub type2interface {
-    my ($i) = @_;
-    $i=~/$_->[0]/ and return $_->[1] foreach (
-					      [ modem => 'ppp'],
-					      [ isdn_internal => 'ippp'],
-					      [ isdn_external => 'ppp'],
-					      [ adsl => 'ppp'],
-					      [ cable => 'eth'],
-					      [ lan => 'eth']);
-}
-
-sub connected { gethostbyname("mandrakesoft.com") ? 1 : 0 }
-
-my $kid_pipe;
-sub connected_bg {
-    local $|=1;
-    my ($ref) = @_;
-    if (defined $kid_pipe) {
-	local *F;
-	*F = *$kid_pipe;
-	fcntl(F, c::F_SETFL(), c::O_NONBLOCK()) or die "can't fcntl F_SETFL: $!";
-	my $a;
-  	if ($a = <F> ) {
-	    close($kid_pipe) || warn "kid exited $?";
-	    undef $kid_pipe;
-	    $a eq '1' and $$ref = 1;
-	    $a eq '0' and $$ref = 0;
-  	}
-    } else { $kid_pipe = connected2() }
-    1;
-}
-
-sub connected2 {
-    my $pid = open(KID_TO_READ, "-|");
-    if ($pid) {   # parent
-	return \*KID_TO_READ;
-    } else {      # child
-	my $a = gethostbyname("mandrakesoft.com") ? 1 : 0;
-	print "$a";
-	c::_exit(0);
-    }
-}
-
-sub disconnected { }
-
-
-sub write_initscript {
-    output ("$prefix/etc/rc.d/init.d/internet",
-	    q{
-#!/bin/bash
-#
-# internet       Bring up/down internet connection
-#
-# chkconfig: 2345 11 89
-# description: Activates/Deactivates the internet interfaces
-#
-# dam's (damien@mandrakesoft.com)
-
-# Source function library.
-. /etc/rc.d/init.d/functions
-
-	case "$1" in
-		start)
-                if [ -e } . $connect_file . q{ ]; then
-			action "Checking internet connections to start at boot" "} . "$connect_file --boot_time" . q{"
-		else
-			action "No connection to start" "true"
-		fi
-		touch /var/lock/subsys/internet
-		;;
-	stop)
-                if [ -e } . $disconnect_file . q{ ]; then
-			action "Stopping internet connection if needed: " "} . "$disconnect_file --boot_time" . q{"
-		else
-			action "No connection to stop" "true"
-		fi
-		rm -f /var/lock/subsys/internet
-		;;
-	restart)
-		$0 stop
-		echo "Waiting 10 sec before restarting the internet connection."
-		sleep 10
-		$0 start
-		;;
-	status)
-		;;
-	*)
-	echo "Usage: internet {start|stop|status|restart}"
-	exit 1
-esac
-exit 0
- });
-    chmod 0755, "$prefix/etc/rc.d/init.d/internet";
-    $::isStandalone ? system("/sbin/chkconfig --add internet") : do {
-	symlinkf ("../init.d/internet", "$prefix/etc/rc.d/rc$_") foreach
-	  '0.d/K11internet', '1.d/K11internet', '2.d/K11internet', '3.d/S89internet', '5.d/S89internet', '6.d/K11internet';
-    };
-}
-
-1;
diff --git a/perl-install/partition_table.pm b/perl-install/partition_table.pm
deleted file mode 100644
index cf4abf2b8..000000000
--- a/perl-install/partition_table.pm
+++ /dev/null
@@ -1,773 +0,0 @@
-package partition_table; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA %EXPORT_TAGS @EXPORT_OK @important_types @important_types2 @fields2save @bad_types);
-
-@ISA = qw(Exporter);
-%EXPORT_TAGS = (
-    types => [ qw(type2name type2fs name2type fs2type isExtended isExt2 isThisFs isTrueFS isSwap isDos isWin isFat isSunOS isOtherAvailableFS isPrimary isNfs isRawLVM isRawRAID isRAID isLVM isNT isMountableRW isNonMountable isPartOfLVM isPartOfRAID isPartOfLoopback isApplePartMap isLoopback isMounted isBusy isSpecial maybeFormatted isApple isAppleBootstrap) ],
-);
-@EXPORT_OK = map { @$_ } values %EXPORT_TAGS;
-
-
-use common;
-use partition_table_raw;
-use detect_devices;
-use log;
-
-@important_types = ('Linux native', 'Linux swap', 
-		    if_(arch() =~ /i.86/, 'Journalised FS: ext3', 'Journalised FS: ReiserFS', 'Journalised FS: JFS', 'Journalised FS: XFS', 'DOS FAT16', 'FAT32'),
-			if_(arch() =~ /ia64/, 'Journalised FS: ext3', 'Journalised FS: ReiserFS', 'Journalised FS: XFS', 'FAT32'),
-		    if_(arch() =~ /ppc/, 'Journalised FS: ext3', 'Journalised FS: ReiserFS', 'Journalised FS: JFS', 'Journalised FS: XFS', 'Apple HFS Partition', 'Apple Bootstrap'));
-@important_types2 = ('Linux RAID', 'Linux Logical Volume Manager partition');
-
-@fields2save = qw(primary extended totalsectors isDirty needKernelReread);
-
-@bad_types = ('Empty', 'DOS 3.3+ Extended Partition', 'Win95: Extended partition, LBA-mapped', 'Linux extended partition');
-
-my %types = (
-  0x0 => 'Empty',
-if_(arch() =~ /^ppc/, 
-  0x183 => 'Journalised FS: ReiserFS',
-  0x283 => 'Journalised FS: XFS',
-  0x383 => 'Journalised FS: JFS',
-  0x483 => 'Journalised FS: ext3',
-  0x401	=> 'Apple Partition',
-  0x401	=> 'Apple Bootstrap',
-  0x402	=> 'Apple HFS Partition',
-), if_(arch() =~ /^i.86/,
-  0x183 => 'Journalised FS: ReiserFS',
-  0x283 => 'Journalised FS: XFS',
-  0x383 => 'Journalised FS: JFS',
-  0x483 => 'Journalised FS: ext3',
-), if_(arch() =~ /^ia64/,
-  0x100 => 'Various',
-  0x183 => 'Journalised FS: ReiserFS',
-  0x283 => 'Journalised FS: XFS',
-  0x483 => 'Journalised FS: ext3',
-), if_(arch() =~ /^sparc/,
-  0x1 => 'SunOS boot',
-  0x2 => 'SunOS root',
-  0x3 => 'SunOS swap',
-  0x4 => 'SunOS usr',
-  0x5 => 'Whole disk',
-  0x6 => 'SunOS stand',
-  0x7 => 'SunOS var',
-  0x8 => 'SunOS home',
-), if_(arch() =~ /^i.86/,
-  0x1 => 'DOS 12-bit FAT',
-  0x2 => 'XENIX root',
-  0x3 => 'XENIX /usr',
-  0x4 => 'DOS 16-bit FAT (up to 32M)',
-  0x5 => 'DOS 3.3+ Extended Partition',
-  0x6 => 'DOS FAT16',
-  0x7 => 'NTFS (or HPFS)',
-  0x8 => 'OS/2 (v1.0-1.3 only) / AIX boot partition / SplitDrive / Commodore DOS / DELL partition spanning multiple drives / QNX 1.x and 2.x ("qny")',
-),
-  0x9 => 'AIX data partition / Coherent filesystem / QNX 1.x and 2.x ("qnz")',
-  0xa => 'OS/2 Boot Manager / Coherent swap partition / OPUS',
-  0xb => 'FAT32',
-  0xc => 'Win98 FAT32, LBA-mapped',
-  0xe => 'Win95: DOS 16-bit FAT, LBA-mapped',
-  0xf => 'Win95: Extended partition, LBA-mapped',
-  0x10 => 'OPUS (?)',
-  0x11 => 'Hidden DOS 12-bit FAT',
-  0x12 => 'Compaq/HP config partition',
-  0x14 => 'Hidden DOS 16-bit FAT <32M',
-  0x16 => 'Hidden DOS 16-bit FAT >=32M',
-  0x17 => 'Hidden IFS (e.g., HPFS)',
-  0x18 => 'AST Windows swapfile',
-  0x1b => 'Hidden WIN95 OSR2 32-bit FAT',
-  0x1c => 'Hidden WIN95 OSR2 32-bit FAT, LBA-mapped',
-  0x1e => 'Hidden FAT95',
-  0x22 => 'Used for Oxygen Extended Partition Table by ekstazya@sprint.ca.',
-  0x24 => 'NEC DOS 3.x',
-  0x38 => 'THEOS ver 3.2 2gb partition',
-  0x39 => 'THEOS ver 4 spanned partition',
-  0x3a => 'THEOS ver 4 4gb partition',
-  0x3b => 'THEOS ver 4 extended partition',
-  0x3c => 'PartitionMagic recovery partition',
-  0x40 => 'Venix 80286',
-  0x41 => 'Linux/MINIX (sharing disk with DRDOS) / Personal RISC Boot / PPC PReP (Power PC Reference Platform) Boot',
-  0x42 => 'Linux swap (sharing disk with DRDOS) / SFS (Secure Filesystem) / W2K marker',
-  0x43 => 'Linux native (sharing disk with DRDOS)',
-  0x45 => 'EUMEL/Elan',
-  0x46 => 'EUMEL/Elan 0x46',
-  0x47 => 'EUMEL/Elan 0x47',
-  0x48 => 'EUMEL/Elan 0x48',
-  0x4d => 'QNX4.x',
-  0x4e => 'QNX4.x 2nd part',
-  0x4f => 'QNX4.x 3rd part / Oberon partition',
-  0x50 => 'OnTrack Disk Manager (older versions) RO',
-  0x51 => 'OnTrack Disk Manager RW (DM6 Aux1) / Novell',
-  0x52 => 'CP/M / Microport SysV/AT',
-  0x53 => 'Disk Manager 6.0 Aux3',
-  0x54 => 'Disk Manager 6.0 Dynamic Drive Overlay',
-  0x55 => 'EZ-Drive',
-  0x56 => 'Golden Bow VFeature Partitioned Volume. / DM converted to EZ-BIOS',
-  0x57 => 'DrivePro',
-  0x5c => 'Priam EDisk',
-  0x61 => 'SpeedStor',
-  0x63 => 'Unix System V (SCO, ISC Unix, UnixWare, ...), Mach, GNU Hurd',
-  0x64 => 'PC-ARMOUR protected partition / Novell Netware 2.xx',
-  0x65 => 'Novell Netware 3.xx or 4.xx',
-  0x67 => 'Novell',
-  0x68 => 'Novell 0x68',
-  0x69 => 'Novell 0x69',
-  0x70 => 'DiskSecure Multi-Boot',
-  0x75 => 'IBM PC/IX',
-  0x80 => 'MINIX until 1.4a',
-  0x81 => 'MINIX since 1.4b, early Linux / Mitac disk manager',
-  0x82 => 'Linux swap',
-  0x83 => 'Linux native',
-  0x84 => 'OS/2 hidden C: drive / Hibernation partition',
-  0x85 => 'Linux extended partition',
-  0x86 => 'Old Linux RAID partition superblock / NTFS volume set',
-  0x87 => 'NTFS volume set',
-  0x8a => 'Linux Kernel Partition (used by AiR-BOOT)',
-  0x8e => 'Linux Logical Volume Manager partition',
-  0x93 => 'Amoeba',
-  0x94 => 'Amoeba bad block table',
-  0x99 => 'DCE376 logical drive',
-  0xa0 => 'IBM Thinkpad hibernation partition / Phoenix NoteBIOS Power Management "Save-to-Disk" partition',
-  0xa5 => 'BSD/386, 386BSD, NetBSD, FreeBSD',
-  0xa6 => 'OpenBSD',
-  0xa7 => 'NEXTSTEP',
-  0xa9 => 'NetBSD',
-  0xaa => 'Olivetti Fat 12 1.44Mb Service Partition',
-  0xb7 => 'BSDI filesystem',
-  0xb8 => 'BSDI swap partition',
-  0xbe => 'Solaris boot partition',
-  0xc0 => 'CTOS / REAL/32 secure small partition',
-  0xc1 => 'DRDOS/secured (FAT-12)',
-  0xc4 => 'DRDOS/secured (FAT-16, < 32M)',
-  0xc6 => 'DRDOS/secured (FAT-16, >= 32M) / Windows NT corrupted FAT16 volume/stripe set',
-  0xc7 => 'Windows NT corrupted NTFS volume/stripe set / Syrinx boot',
-  0xcb => 'reserved for DRDOS/secured (FAT32)',
-  0xcc => 'reserved for DRDOS/secured (FAT32, LBA)',
-  0xcd => 'CTOS Memdump?',
-  0xce => 'reserved for DRDOS/secured (FAT16, LBA)',
-  0xd0 => 'REAL/32 secure big partition',
-  0xd1 => 'Old Multiuser DOS secured FAT12',
-  0xd4 => 'Old Multiuser DOS secured FAT16 <32M',
-  0xd5 => 'Old Multiuser DOS secured extended partition',
-  0xd6 => 'Old Multiuser DOS secured FAT16 >=32M',
-  0xd8 => 'CP/M-86',
-  0xdb => 'Digital Research CP/M, Concurrent CP/M, Concurrent DOS / CTOS (Convergent Technologies OS -Unisys) / KDG Telemetry SCPU boot',
-  0xdd => 'Hidden CTOS Memdump?',
-  0xe1 => 'DOS access or SpeedStor 12-bit FAT extended partition',
-  0xe3 => 'DOS R/O or SpeedStor',
-  0xe4 => 'SpeedStor 16-bit FAT extended partition < 1024 cyl.',
-  0xeb => 'BeOS',
-  0xee => 'EFI GPT',
-  0xef => 'EFI (FAT-12/16/32)',
-  0xf1 => 'SpeedStor 0xf1',
-  0xf2 => 'DOS 3.3+ secondary partition',
-  0xf4 => 'SpeedStor large partition / Prologue single-volume partition',
-  0xf5 => 'Prologue multi-volume partition',
-  0xfd => 'Linux RAID',
-  0xfe => 'SpeedStor > 1024 cyl. or LANstep / IBM PS/2 IML (Initial Microcode Load) partition, located at the end of the disk. / Windows NT Disk Administrator hidden partition / Linux Logical Volume Manager partition (old)',
-  0xff => 'Xenix Bad Block Table',
-);
-
-my %type2fs = (
-arch() =~ /^ppc/ ? (
-  0x07 => 'hpfs',
-) : (
-  0x07 => 'ntfs',
-),
-arch() !~ /sparc/ ? (
-  0x01 => 'vfat',
-  0x04 => 'vfat',
-  0x05 => 'ignore',
-  0x06 => 'vfat',
-) : (
-  0x01 => 'ufs',
-  0x02 => 'ufs',
-  0x04 => 'ufs',
-  0x06 => 'ufs',
-  0x07 => 'ufs',
-  0x08 => 'ufs',
-),
-  0x0b => 'vfat',
-  0x0c => 'vfat',
-  0x0e => 'vfat',
-  0x1b => 'vfat',
-  0x1c => 'vfat',
-  0x1e => 'vfat',
-  0x82 => 'swap',
-  0x83 => 'ext2',
-  0x183=> 'reiserfs',
-  0x283=> 'xfs',
-  0x383=> 'jfs',
-  0x483=> 'ext3',
-  0x401 => 'apple',
-  0x402 => 'hfs',
-);
-
-my %types_rev = reverse %types;
-my %fs2type = reverse %type2fs;
-
-
-1;
-
-sub important_types { 
-    my @l = (@important_types, if_($::expert, @important_types2, sort values %types));
-    difference2(\@l, \@bad_types);
-}
-
-sub type2fs { $type2fs{$_[0]{type}} || $_[0]{type} }
-sub fs2type { $fs2type{$_[0]} || $_[0] }
-sub type2name { $types{$_[0]} || $_[0] }
-sub name2type { 
-    local ($_) = @_;
-    /0x(.*)/ ? hex $1 : $types_rev{$_} || $_;
-}
-
-sub isWholedisk { arch() =~ /^sparc/ && $_[0]{type} == 5 }
-sub isExtended { arch() !~ /^sparc/ && ($_[0]{type} == 5 || $_[0]{type} == 0xf || $_[0]{type} == 0x85) }
-sub isRawLVM { $_[0]{type} == 0x8e }
-sub isRawRAID { $_[0]{type} == 0xfd }
-sub isSwap { type2fs($_[0]) eq 'swap' }
-sub isExt2 { type2fs($_[0]) eq 'ext2' }
-sub isDos { arch() !~ /^sparc/ && $ {{ 1=>1, 4=>1, 6=>1 }}{$_[0]{type}} }
-sub isWin { $ {{ 0xb=>1, 0xc=>1, 0xe=>1, 0x1b=>1, 0x1c=>1, 0x1e=>1 }}{$_[0]{type}} }
-sub isFat { isDos($_[0]) || isWin($_[0]) }
-sub isSunOS { arch() =~ /sparc/ && $ {{ 0x1=>1, 0x2=>1, 0x4=>1, 0x6=>1, 0x7=>1, 0x8=>1 }}{$_[0]{type}} }
-sub isNfs { $_[0]{type} eq 'nfs' }
-sub isNT { arch() !~ /^sparc/ && $_[0]{type} == 0x7 }
-sub isApple { type2fs($_[0]) eq 'apple' && defined $_[0]{isDriver} }
-sub isAppleBootstrap { type2fs($_[0]) eq 'apple' && defined $_[0]{isBoot} }
-sub isHiddenMacPart { defined $_[0]{isMap} }
-
-sub isThisFs { type2fs($_[1]) eq $_[0] }
-sub isTrueFS { member(type2fs($_[0]), qw(ext2 reiserfs xfs jfs ext3)) }
-
-sub isOtherAvailableFS { isFat($_[0]) || isSunOS($_[0]) || isThisFs('hfs', $_[0]) } #- other OS that linux can access its filesystem
-sub isMountableRW { isTrueFS($_[0]) || isOtherAvailableFS($_[0]) }
-sub isNonMountable { isRawRAID($_[0]) || isRawLVM($_[0]) }
-
-sub isPartOfLVM { defined $_[0]{lvm} }
-sub isPartOfRAID { defined $_[0]{raid} }
-sub isPartOfLoopback { defined $_[0]{loopback} }
-sub isRAID { $_[0]{device} =~ /^md/ }
-sub isLVM { $_[0]{LVMname} }
-sub isLoopback { defined $_[0]{loopback_file} }
-sub isMounted { $_[0]{isMounted} }
-sub isBusy { isMounted($_[0]) || isPartOfRAID($_[0]) || isPartOfLVM($_[0]) || isPartOfLoopback($_[0]) }
-sub isSpecial { isRAID($_[0]) || isLVM($_[0]) || isLoopback($_[0]) }
-sub maybeFormatted { $_[0]{isFormatted} || !$_[0]{notFormatted} }
-
-
-#- works for both hard drives and partitions ;p
-sub description {
-    my ($hd) = @_;
-    my $win = $hd->{device_windobe};
-
-    sprintf "%s%s (%s%s%s%s)", 
-      $hd->{device}, 
-      $win && " [$win:]", 
-      formatXiB($hd->{totalsectors} || $hd->{size}, 512),
-      $hd->{info} && ", $hd->{info}",
-      $hd->{mntpoint} && ", " . $hd->{mntpoint},
-      $hd->{type} && ", " . type2name($hd->{type});
-}
-
-sub isPrimary {
-    my ($part, $hd) = @_;
-    foreach (@{$hd->{primary}{raw}}) { $part eq $_ and return 1; }
-    0;
-}
-
-sub adjustStartAndEnd {
-    my ($hd, $part) = @_;
-
-    $hd->adjustStart($part);
-    $hd->adjustEnd($part);
-}
-
-sub verifyNotOverlap {
-    my ($a, $b) = @_;
-    $a->{start} + $a->{size} <= $b->{start} || $b->{start} + $b->{size} <= $a->{start};
-}
-sub verifyInside {
-    my ($a, $b) = @_;
-    $b->{start} <= $a->{start} && $a->{start} + $a->{size} <= $b->{start} + $b->{size};
-}
-
-sub verifyParts_ {
-    foreach my $i (@_) {
-	foreach (@_) {
-	    next if !$i || !$_ || $i == $_ || isWholedisk($i) || isExtended($i); #- avoid testing twice for simplicity :-)
-	    if (isWholedisk($_)) {
-		verifyInside($i, $_) or
-		  cdie sprintf("partition sector #$i->{start} (%s) is not inside whole disk (%s)!",
-			       formatXiB($i->{size}, 512), formatXiB($_->{size}, 512));
-	    } elsif (isExtended($_)) {
-		verifyNotOverlap($i, $_) or
-		  log::l(sprintf("warning partition sector #$i->{start} (%s) is overlapping with extended partition!",
-				 formatXiB($i->{size}, 512))); #- only warning for this one is acceptable
-	    } else {
-		verifyNotOverlap($i, $_) or
-		  cdie sprintf("partitions sector #$i->{start} (%s) and sector #$_->{start} (%s) are overlapping!",
-			       formatXiB($i->{size}, 512), formatXiB($_->{size}, 512));
-	    }
-	}
-    }
-}
-sub verifyParts {
-    my ($hd) = @_;
-    verifyParts_(get_normal_parts($hd));
-}
-sub verifyPrimary {
-    my ($pt) = @_;
-    $_->{start} > 0 || arch() =~ /^sparc/ || die "partition must NOT start at sector 0" foreach @{$pt->{normal}};
-    verifyParts_(@{$pt->{normal}}, $pt->{extended});
-}
-
-sub assign_device_numbers {
-    my ($hd) = @_;
-
-    my $i = 1;
-    my $start = 1; 
-    
-    #- on PPC we need to assign device numbers to the holes too - big FUN!
-    #- not if it's an IBM machine using a DOS partition table though
-    if (arch() =~ /ppc/ && detect_devices::get_mac_model() !~ /^IBM/) {
-	#- first sort the normal parts
-	$hd->{primary}{normal} = [sort { $a->{start} <=> $b->{start} } @{$hd->{primary}{normal}} ];
-    
-	#- now loop through them, assigning partition numbers - reserve one for the holes
-	foreach (@{$hd->{primary}{normal}}) {
-	    if ($_->{start} > $start) {
-		log::l("PPC: found a hole on $hd->{prefix} before $_->{start}, skipping device..."); 
-		$i++;
-	    }
-	    $_->{device} = $hd->{prefix} . $i++;
-	    $start = $_->{start} + $_->{size};
-	}
-    } else {	    
-	$_->{device} = $hd->{prefix} . $i++ foreach @{$hd->{primary}{raw}},
-                                                map { $_->{normal} } @{$hd->{extended} || []};
-    }
-
-    #- try to figure what the windobe drive letter could be!
-    #
-    #- first verify there's at least one primary dos partition, otherwise it
-    #- means it is a secondary disk and all will be false :(
-    my ($c, @others) = grep { isFat($_) } @{$hd->{primary}{normal}};
-
-    $i = ord 'C';
-    $c->{device_windobe} = chr($i++) if $c;
-    $_->{device_windobe} = chr($i++) foreach grep { isFat($_) } map { $_->{normal} } @{$hd->{extended}};
-    $_->{device_windobe} = chr($i++) foreach @others;
-}
-
-sub remove_empty_extended {
-    my ($hd) = @_;
-    my $last = $hd->{primary}{extended} or return;
-    @{$hd->{extended}} = grep {
-	if ($_->{normal}) {
-	    $last = $_;
-	} else {
-	    %{$last->{extended}} = $_->{extended} ? %{$_->{extended}} : ();
-	}
-	$_->{normal};
-    } @{$hd->{extended}};
-    adjust_main_extended($hd, 1);
-}
-
-sub adjust_main_extended {
-    my ($hd, $no_auto_win_extended) = @_;
-    $no_auto_win_extended = 1;
-
-    if (!is_empty_array_ref $hd->{extended}) {
-	my ($l, @l) = @{$hd->{extended}};
-
-	# the first is a special case, must recompute its real size
-	my $start = round_down($l->{normal}{start} - 1, $hd->{geom}{sectors});
-	my $end = $l->{normal}{start} + $l->{normal}{size};
-	my $only_linux = 1; my $has_win_lba = 0;
-	foreach (map $_->{normal}, $l, @l) {
-	    $start = min($start, $_->{start});
-	    $end = max($end, $_->{start} + $_->{size});
-	    $only_linux &&= isTrueFS($_) || isSwap($_);
-	    $has_win_lba ||= $_->{type} == 0xc || $_->{type} == 0xe;
-	}
-	$l->{start} = $hd->{primary}{extended}{start} = $start;
-	$l->{size} = $hd->{primary}{extended}{size} = $end - $start;
-	$hd->{primary}{extended}{type} = $only_linux ? 0x85 : $has_win_lba ? 0xf : 0x5 if !$::expert && !$no_auto_win_extended;
-    }
-    unless (@{$hd->{extended} || []} || !$hd->{primary}{extended}) {
-	%{$hd->{primary}{extended}} = (); #- modify the raw entry
-	delete $hd->{primary}{extended};
-    }
-    verifyParts($hd); #- verify everything is all right
-}
-
-sub adjust_local_extended {
-    my ($hd, $part) = @_;
-    
-    foreach (@{$hd->{extended} || []}) {
-	$_->{normal} == $part or next;
-	$_->{size} = $part->{size} + $part->{start} - $_->{start};
-	last;
-    }
-}
-
-sub get_normal_parts {
-    my ($hd) = @_;
-
-    @{$hd->{primary}{normal} || []}, map { $_->{normal} } @{$hd->{extended} || []}
-}
-
-sub get_normal_parts_and_holes {
-    my ($hd) = @_;
-    my ($start, $last) = ($hd->first_usable_sector, $hd->last_usable_sector);
-
-    ref($hd) or print("get_normal_parts_and_holes: bad hd" . backtrace(), "\n");
-
-    my @l = map {
-	my $current = $start;
-	$start = $_->{start} + $_->{size};
-	my $hole = { start => $current, size => $_->{start} - $current, type => 0, rootDevice => $hd->{device} };
-	$hole, $_;
-    } sort { $a->{start} <=> $b->{start} } grep { !isWholedisk($_) } get_normal_parts($hd);
-
-    push @l, { start => $start, size => $last - $start, type => 0, rootDevice => $hd->{device} };
-    grep { $_->{type} || $_->{size} >= $hd->cylinder_size } @l;
-}
-
-sub read_one($$) {
-    my ($hd, $sector) = @_;
-    my ($pt, $info);
-
-    #- it can be safely considered that the first sector is used to probe the partition table
-    #- but other sectors (typically for extended partition ones) have to match this type!
-    if (!$sector) {
-	my @parttype = (
-	  if_(arch() =~ /^ia64/, 'gpt'),
-	  arch() =~ /^sparc/ ? ('sun', 'bsd', 'unknown') : ('dos', 'bsd', 'sun', 'mac', 'unknown'),
-	);
-	foreach ('empty', @parttype) {
-	    /unknown/ and die "unknown partition table format";
-	    eval {
-		require("partition_table_$_.pm");
-		bless $hd, "partition_table_$_";
-		($pt, $info) = $hd->read($sector);
-		log::l("found a $_ partition table on $hd->{file} at sector $sector");
-	    };
-	    $@ or last;
-	}
-    } else {
-	#- keep current blessed object for that, this means it is neccessary to read sector 0 before.
-	($pt, $info) = $hd->read($sector);
-    }
-
-    my @extended = $hd->hasExtended ? grep { isExtended($_) } @$pt : ();
-    my @normal = grep { $_->{size} && $_->{type} && !isExtended($_) } @$pt;
-
-    @extended > 1 and die "more than one extended partition";
-
-    $_->{rootDevice} = $hd->{device} foreach @normal, @extended;
-    { raw => $pt, extended => $extended[0], normal => \@normal, info => $info };
-}
-
-sub read($;$) {
-    my ($hd, $clearall) = @_;
-    if ($clearall) {
-	partition_table_raw::zero_MBR_and_dirty($hd);
-	return 1;
-    }
-    my $pt = read_one($hd, 0) or return 0;
-    $hd->{primary} = $pt;
-    undef $hd->{extended};
-    verifyPrimary($pt);
-    eval {
-	$pt->{extended} and read_extended($hd, $pt->{extended}) || return 0;
-    }; die "extended partition: $@" if $@;
-
-    assign_device_numbers($hd);
-    remove_empty_extended($hd);
-    1;
-}
-
-sub read_extended {
-    my ($hd, $extended) = @_;
-
-    my $pt = read_one($hd, $extended->{start}) or return 0;
-    $pt = { %$extended, %$pt };
-
-    push @{$hd->{extended}}, $pt;
-    @{$hd->{extended}} > 100 and die "oops, seems like we're looping here :(  (or you have more than 100 extended partitions!)";
-
-    @{$pt->{normal}} <= 1 or die "more than one normal partition in extended partition";
-    @{$pt->{normal}} >= 1 or cdie "no normal partition in extended partition";
-    $pt->{normal} = $pt->{normal}[0];
-    #- in case of extended partitions, the start sector is local to the partition or to the first extended_part!
-    $pt->{normal}{start} += $pt->{start};
-
-    #- the following verification can broke an existing partition table that is
-    #- correctly read by fdisk or cfdisk. maybe the extended partition can be
-    #- recomputed to get correct size.
-    if (!verifyInside($pt->{normal}, $extended)) {
-	$extended->{size} = $pt->{normal}{start} + $pt->{normal}{size};
-	verifyInside($pt->{normal}, $extended) or die "partition $pt->{normal}{device} is not inside its extended partition";
-    }
-
-    if ($pt->{extended}) {
-	$pt->{extended}{start} += $hd->{primary}{extended}{start};
-	read_extended($hd, $pt->{extended}) or return 0;
-    }
-    1;
-}
-
-# write the partition table
-sub write {
-    my ($hd) = @_;
-    $hd->{isDirty} or return;
-
-    #- set first primary partition active if no primary partitions are marked as active.
-    if (my @l = @{$hd->{primary}{raw}}) {
-	foreach (@l) { 
-	    $_->{local_start} = $_->{start}; 
-	    $_->{active} ||= 0;
-	}
-	$l[0]{active} = 0x80 if !grep { $_->{active} } @l;
-    }
-
-    #- last chance for verification, this make sure if an error is detected,
-    #- it will never be writed back on partition table.
-    verifyParts($hd);
-
-    $hd->write(0, $hd->{primary}{raw}, $hd->{primary}{info}) or die "writing of partition table failed";
-
-    #- should be fixed but a extended exist with no real extended partition, that blanks mbr!
-    if (arch() !~ /^sparc/) {
-	foreach (@{$hd->{extended}}) {
-	    # in case of extended partitions, the start sector must be local to the partition
-	    $_->{normal}{local_start} = $_->{normal}{start} - $_->{start};
-	    $_->{extended} and $_->{extended}{local_start} = $_->{extended}{start} - $hd->{primary}{extended}{start};
-
-	    $hd->write($_->{start}, $_->{raw}) or die "writing of partition table failed";
-	}
-    }
-    $hd->{isDirty} = 0;
-    $hd->{hasBeenDirty} = 1; #- used in undo (to know if undo should believe isDirty or not)
-
-    if ($hd->{needKernelReread} && ref($hd->{needKernelReread}) eq 'ARRAY' && $::isStandalone) {
-	#- we've only been adding partitions. Try special add_partition (using BLKPG_ADD_PARTITION)
-	local *F;
-	partition_table_raw::openit($hd, *F) or goto force_reread;
-
-	foreach (@{$hd->{needKernelReread}}) {
-	    c::add_partition(fileno F, $_->{start}, $_->{size}, $_->{device} =~ /(\d+)$/)
-		or goto force_reread;
-	}
-    } elsif ($hd->{needKernelReread}) {
-      force_reread:
-	#- now sync disk and re-read the partition table
-	common::sync();
-
-	my @magic_parts = grep { $_->{isMounted} && $_->{real_mntpoint} } get_normal_parts($hd);
-	foreach (@magic_parts) {
-	    syscall_('umount', $_->{real_mntpoint}) or log::l(_("error unmounting %s: %s", $_->{real_mntpoint}, "$!"));
-	}
-	$hd->kernel_read;
-	foreach (@magic_parts) {
-	    syscall_('mount', , $_->{real_mntpoint}, type2fs($_), c::MS_MGC_VAL()) or log::l(_("mount failed: ") . "$!");
-	}
-    }
-    $hd->{needKernelReread} = 0;
-}
-
-sub active {
-    my ($hd, $part) = @_;
-
-    $_->{active} = 0 foreach @{$hd->{primary}{normal}};
-    $part->{active} = 0x80;
-    $hd->{isDirty} = 1;
-}
-
-
-# remove a normal partition from hard drive hd
-sub remove {
-    my ($hd, $part) = @_;
-    my $i;
-
-    #- first search it in the primary partitions
-    $i = 0; foreach (@{$hd->{primary}{normal}}) {
-	if ($_ eq $part) {
-	    splice(@{$hd->{primary}{normal}}, $i, 1);
-	    %$_ = (); #- blank it
-
-	    $hd->raw_removed($hd->{primary}{raw});
-	    return $hd->{isDirty} = $hd->{needKernelReread} = 1;
-	}
-	$i++;
-    }
-
-    my ($first, $second, $third) = map { $_->{normal} } @{$hd->{extended} || []};
-    if ($third && $first eq $part) {
-	die "Can't handle removing hda5 when hda6 is not the second partition" if $second->{start} > $third->{start};
-    }      
-
-    #- otherwise search it in extended partitions
-    foreach (@{$hd->{extended} || []}) {
-	$_->{normal} eq $part or next;
-
-	delete $_->{normal}; #- remove it
-	remove_empty_extended($hd);
-
-	return $hd->{isDirty} = $hd->{needKernelReread} = 1;
-    }
-    0;
-}
-
-# create of partition at starting at `start', of size `size' and of type `type' (nice comment, uh?)
-sub add_primary {
-    my ($hd, $part) = @_;
-
-    {
-	local $hd->{primary}{normal}; #- save it to fake an addition of $part, that way add_primary do not modify $hd if it fails
-	push @{$hd->{primary}{normal}}, $part;
-	adjust_main_extended($hd); #- verify
-	$hd->raw_add($hd->{primary}{raw}, $part);
-    }
-    push @{$hd->{primary}{normal}}, $part; #- really do it
-}
-
-sub add_extended {
-    arch() =~ /^sparc|ppc/ and die _("Extended partition not supported on this platform");
-
-    my ($hd, $part, $extended_type) = @_;
-    $extended_type =~ s/Extended_?//;
-
-    my $e = $hd->{primary}{extended};
-
-    if ($e && !verifyInside($part, $e)) {
-	#-die "sorry, can't add outside the main extended partition" unless $::unsafe;
-	my $end = $e->{start} + $e->{size};
-	my $start = min($e->{start}, $part->{start});
-	$end = max($end, $part->{start} + $part->{size}) - $start;
-
-	{ #- faking a resizing of the main extended partition to test for problems
-	    local $e->{start} = $start;
-	    local $e->{size} = $end - $start;
-	    eval { verifyPrimary($hd->{primary}) };
-	    $@ and die
-_("You have a hole in your partition table but I can't use it.
-The only solution is to move your primary partitions to have the hole next to the extended partitions");
-	}
-    }
-
-    if ($e && $part->{start} < $e->{start}) {
-	my $l = first (@{$hd->{extended}});
-
-	#- the first is a special case, must recompute its real size
-	$l->{start} = round_down($l->{normal}{start} - 1, $hd->cylinder_size());
-	$l->{size} = $l->{normal}{start} + $l->{normal}{size} - $l->{start};
-	my $ext = { %$l };
-	unshift @{$hd->{extended}}, { type => 5, raw => [ $part, $ext, {}, {} ], normal => $part, extended => $ext };
-	#- size will be autocalculated :)
-    } else {
-	my ($ext, $ext_size) = is_empty_array_ref($hd->{extended}) ?
-	  ($hd->{primary}, -1) : #- -1 size will be computed by adjust_main_extended
-	  (top(@{$hd->{extended}}), $part->{size});
-	my %ext = ( type => $extended_type || 5, start => $part->{start}, size => $ext_size );
-
-	$hd->raw_add($ext->{raw}, \%ext);
-	$ext->{extended} = \%ext;
-	push @{$hd->{extended}}, { %ext, raw => [ $part, {}, {}, {} ], normal => $part };
-    }
-    $part->{start}++; $part->{size}--; #- let it start after the extended partition sector
-    adjustStartAndEnd($hd, $part);
-
-    adjust_main_extended($hd);
-}
-
-sub add {
-    my ($hd, $part, $primaryOrExtended, $forceNoAdjust) = @_;
-
-    get_normal_parts($hd) >= ($hd->{device} =~ /^rd/ ? 7 : $hd->{device} =~ /^(sd|ida|cciss|ataraid)/ ? 15 : 63) and cdie "maximum number of partitions handled by linux reached";
-
-    $part->{notFormatted} = 1;
-    $part->{isFormatted} = 0;
-    $part->{rootDevice} = $hd->{device};
-    $part->{start} ||= 1 if arch() !~ /^sparc/; #- starting at sector 0 is not allowed
-    adjustStartAndEnd($hd, $part) unless $forceNoAdjust;
-
-    my $e = $hd->{primary}{extended};
-    my $nb_primaries = $hd->{device} =~ /^rd/ ? 3 : 1;
-
-    if (arch() =~ /^sparc|ppc/ ||
-	$primaryOrExtended eq 'Primary' ||
-	$primaryOrExtended !~ /Extended/ && @{$hd->{primary}{normal} || []} < $nb_primaries) {
-	eval { add_primary($hd, $part) };
-	goto success if !$@;
-    }
-    eval { add_extended($hd, $part, $primaryOrExtended) } if $hd->hasExtended; #- try adding extended
-    if ($@ || !$hd->hasExtended) {
-	eval { add_primary($hd, $part) };
-	die $@ if $@; #- send the add extended error which should be better
-    }
-  success:
-    assign_device_numbers($hd);
-    $hd->{isDirty} = 1;
-    push @{$hd->{needKernelReread} ||= []}, $part if !$hd->{needKernelReread} || ref($hd->{needKernelReread}) eq 'ARRAY'
-}
-
-# search for the next partition
-sub next {
-    my ($hd, $part) = @_;
-
-    first(
-	  sort { $a->{start} <=> $b->{start} }
-	  grep { $_->{start} >= $part->{start} + $part->{size} }
-	  get_normal_parts($hd)
-	 );
-}
-sub next_start {
-    my ($hd, $part) = @_;
-    my $next = &next($hd, $part);
-    $next ? $next->{start} : $hd->{totalsectors};
-}
-
-sub load {
-    my ($hd, $file, $force) = @_;
-
-    local *F;
-    open F, $file or die _("Error reading file %s", $file);
-
-    my $h;
-    {
-	local $/ = "\0";
-	eval <F>;
-    }
-    $@ and die _("Restoring from file %s failed: %s", $file, $@);
-
-    ref $h eq 'ARRAY' or die _("Bad backup file");
-
-    my %h; @h{@fields2save} = @$h;
-
-    $h{totalsectors} == $hd->{totalsectors} or $force or cdie "bad totalsectors";
-
-    #- unsure we don't modify totalsectors
-    local $hd->{totalsectors};
-
-    @{$hd}{@fields2save} = @$h;
-
-    delete @$_{qw(isMounted isFormatted notFormatted toFormat toFormatUnsure)} foreach get_normal_parts($hd);
-    $hd->{isDirty} = $hd->{needKernelReread} = 1;
-}
-
-sub save {
-    my ($hd, $file) = @_;
-    my @h = @{$hd}{@fields2save};
-    local *F;
-    require Data::Dumper;
-    open F, ">$file"
-      and print F Data::Dumper->Dump([\@h], ['$h']), "\0"
-      or die _("Error writing to file %s", $file);
-}
diff --git a/perl-install/partition_table_bsd.pm b/perl-install/partition_table_bsd.pm
deleted file mode 100644
index cb6a8441e..000000000
--- a/perl-install/partition_table_bsd.pm
+++ /dev/null
@@ -1,147 +0,0 @@
-package partition_table_bsd; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(partition_table_raw);
-
-use common;
-use partition_table_raw;
-use partition_table;
-use c;
-
-#- very bad and rough handling :(
-my %typeToDos = (
-  8 => 0x83,
-  1 => 0x82,
-);
-my %typeFromDos = reverse %typeToDos;
-
-my ($main_format, $main_fields) = list2kv(
-  I   => 'magic',
-  S   => 'type',
-  S   => 'subtype',
-  a16 => 'typename',
-  a16 => 'packname',
-  I   => 'secsize',
-  I   => 'nsectors',
-  I   => 'ntracks',
-  I   => 'ncylinders',
-  I   => 'secpercyl',
-  I   => 'secprtunit',
-  S   => 'sparespertrack',
-  S   => 'sparespercyl',
-  I   => 'acylinders',
-  S   => 'rpm',
-  S   => 'interleave',
-  S   => 'trackskew',
-  S   => 'cylskew',
-  I   => 'headswitch',
-  I   => 'trkseek',
-  I   => 'flags',
-  a20 => 'drivedata',
-  a20 => 'spare',
-  I   => 'magic2',
-  S   => 'checksum',
-  S   => 'npartitions',
-  I   => 'bbsize',
-  I   => 'sbsize',
-  a128=> 'partitions',
-  a236=> 'blank',
-);
-$main_format = join '', @$main_format;
-
-my @fields = qw(size start fsize type frag cpg);
-my $format = "I I I C C S";
-my $magic = 0x82564557;
-my $nb_primary = 8;
-my $offset = 0x40;
-
-sub read($$) {
-    my ($hd, $sector) = @_;
-    my $tmp;
-
-    local *F; partition_table_raw::openit($hd, *F) or die "failed to open device";
-    c::lseek_sector(fileno(F), $sector, $offset) or die "reading of partition in sector $sector failed";
-
-    sysread F, $tmp, psizeof($main_format) or die "error while reading partition table in sector $sector";
-    my %info; @info{@$main_fields} = unpack $main_format, $tmp;
-
-    #- TODO verify checksum
-
-    my $size = psizeof($format);
-    my @pt = map {
-	my %h; @h{@fields} = unpack $format, $_;
-	$h{type} = $typeToDos{$h{type}} || $h{type};
-	\%h;
-    } $info{partitions} =~ /(.{$size})/g;
-
-    #- check magic number
-    $info{magic}  == $magic or die "bad magic number";
-    $info{magic2} == $magic or die "bad magic number";
-
-    [ @pt ], \%info;
-}
-
-# write the partition table (and extended ones)
-# for each entry, it uses fields: start, size, type, active
-sub write($$$;$) {
-    my ($hd, $sector, $pt, $info) = @_;
-
-    #- handle testing for writing partition table on file only!
-    local *F;
-    if ($::testing) {
-	my $file = "/tmp/partition_table_$hd->{device}";
-	open F, ">$file" or die "error opening test file $file";
-    } else {
-	partition_table_raw::openit($hd, *F, 2) or die "error opening device $hd->{device} for writing";
-        c::lseek_sector(fileno(F), $sector, $offset) or return 0;
-    }
-
-    #- TODO compute checksum
-
-    $info->{npartitions} = $nb_primary; #- is it ok?
-
-    @$pt == $nb_primary or die "partition table does not have $nb_primary entries";
-    $info->{partitions} = join '', map {
-	local $_->{type} = $typeFromDos{$_->{type}} || $_->{type};
-	pack $format, @$_{@fields};
-    } @$pt;
-
-    syswrite F, pack($main_format, @$info{@$main_fields}), psizeof($main_format) or return 0;
-    1;
-}
-
-sub info {
-    my ($hd) = @_;
-    my $dtype_scsi  = 4; #- taken from fdisk, removed unused one,
-    my $dtype_ST506 = 6; #- see fdisk for more
-
-    {
-      magic => $magic,
-      magic2 => $magic,
-      dtype => $hd->{device} =~ /^sd/ ? $dtype_scsi : $dtype_ST506,
-      secsize => $common::SECTORSIZE,
-      ncylinders => $hd->{geom}{cylinders},
-      secpercyl => $hd->cylinder_size(),
-      secprtunit => $hd->{geom}{totalsectors},
-      rpm => 3600,
-      interleave => 1,
-      trackskew => 0,
-      cylskew => 0,
-      headswitch => 0,
-      trkseek => 0,
-      bbsize => 8192, #- size of boot area, with label
-      sbsize => 8192, #- max size of fs superblock
-    };
-}
-
-sub clear_raw {
-    my ($hd) = @_;
-    { raw => [ ({}) x $nb_primary ], info => info($hd) };
-}
-
-sub first_usable_sector { 2048 }
-
-1;
diff --git a/perl-install/partition_table_dos.pm b/perl-install/partition_table_dos.pm
deleted file mode 100644
index 00ee589b9..000000000
--- a/perl-install/partition_table_dos.pm
+++ /dev/null
@@ -1,99 +0,0 @@
-package partition_table_dos; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(partition_table_raw);
-
-use common;
-use partition_table_raw;
-use partition_table;
-use c;
-
-my @fields = qw(active start_head start_sec start_cyl type end_head end_sec end_cyl start size);
-my $format = "C8 V2";
-my $magic = "\x55\xAA";
-my $nb_primary = 4;
-
-my $offset = $common::SECTORSIZE - length($magic) - $nb_primary * common::psizeof($format);
-
-sub hasExtended { 1 }
-
-sub compute_CHS($$) {
-    my ($hd, $e) = @_;
-    my @l = qw(cyl head sec);
-    @$e{map { "start_$_" } @l} = $e->{start} || $e->{type} ? CHS2rawCHS($hd, sector2CHS($hd, $e->{start})) : (0,0,0);
-    @$e{map { "end_$_"   } @l} = $e->{start} || $e->{type} ? CHS2rawCHS($hd, sector2CHS($hd, $e->{start} + $e->{size} - 1)) : (0,0,0);
-    1;
-}
-
-sub CHS2rawCHS {
-    my ($hd, $c, $h, $s) = @_;
-    if ($c > 1023) {
-	#- no way to have a #cylinder >= 1024
-	$c = 1023;
-	$h = $hd->{geom}{heads} - 1;
-	$s = $hd->{geom}{sectors};
-    }
-    ($c & 0xff, $h, $s | ($c >> 2 & 0xc0));
-}
-
-# returns (cylinder, head, sector)
-sub sector2CHS {
-    my ($hd, $start) = @_;
-    my ($s, $h);
-    ($start, $s) = divide($start, $hd->{geom}{sectors});
-    ($start, $h) = divide($start, $hd->{geom}{heads});
-    ($start, $h, $s + 1);
-}
-
-sub read {
-    my ($hd, $sector) = @_;
-    my $tmp;
-
-    local *F; partition_table_raw::openit($hd, *F) or die "failed to open device";
-    c::lseek_sector(fileno(F), $sector, $offset) or die "reading of partition in sector $sector failed";
-
-    my @pt = map {
-	sysread F, $tmp, psizeof($format) or die "error while reading partition table in sector $sector";
-	my %h; @h{@fields} = unpack $format, $tmp;
-	\%h;
-    } (1..$nb_primary);
-
-    #- check magic number
-    sysread F, $tmp, length $magic or die "error reading magic number";
-    $tmp eq $magic or die "bad magic number";
-
-    [ @pt ];
-}
-
-# write the partition table (and extended ones)
-# for each entry, it uses fields: start, size, type, active
-sub write($$$;$) {
-    my ($hd, $sector, $pt) = @_;
-
-    #- handle testing for writing partition table on file only!
-    local *F;
-    if ($::testing) {
-	my $file = "/tmp/partition_table_$hd->{device}";
-	open F, ">$file" or die "error opening test file $file";
-    } else {
-	partition_table_raw::openit($hd, *F, 2) or die "error opening device $hd->{device} for writing";
-        c::lseek_sector(fileno(F), $sector, $offset) or return 0;
-    }
-
-    @$pt == $nb_primary or die "partition table does not have $nb_primary entries";
-    foreach (@$pt) {
-	compute_CHS($hd, $_);
-	local $_->{start} = $_->{local_start} || 0;
-	$_->{active} ||= 0; $_->{type} ||= 0; $_->{size} ||= 0; #- for no warning
-	syswrite F, pack($format, @$_{@fields}), psizeof($format) or return 0;
-    }
-    syswrite F, $magic, length $magic or return 0;
-    1;
-}
-
-sub clear_raw { { raw => [ ({}) x $nb_primary ] } }
-
-1;
diff --git a/perl-install/partition_table_empty.pm b/perl-install/partition_table_empty.pm
deleted file mode 100644
index d460317f5..000000000
--- a/perl-install/partition_table_empty.pm
+++ /dev/null
@@ -1,38 +0,0 @@
-package partition_table_empty; # $Id$
-
-#- this is a mainly dummy partition table. If we find it's empty, we just call -
-#- zero_MBR which will take care of bless'ing us to the partition table type best
-#- suited
-
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(partition_table_raw);
-
-use common;
-use partition_table_raw;
-use partition_table;
-use c;
-
-
-sub read($$) {
-    my ($hd, $sector) = @_;
-    my $tmp;
-
-    my $magic = "\0" x 512;
-
-    local *F; partition_table_raw::openit($hd, *F) or die "failed to open device";
-    c::lseek_sector(fileno(F), $sector, 0) or die "reading of partition in sector $sector failed";
-
-    #- check magic number
-    sysread F, $tmp, length $magic or die "error reading magic number";
-    $tmp eq $magic or die "bad magic number";
-
-    partition_table_raw::zero_MBR($hd);
-
-    $hd->{primary}{raw};
-}
-
-1;
diff --git a/perl-install/partition_table_gpt.pm b/perl-install/partition_table_gpt.pm
deleted file mode 100644
index 4a0514d8e..000000000
--- a/perl-install/partition_table_gpt.pm
+++ /dev/null
@@ -1,266 +0,0 @@
-package partition_table_gpt; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(partition_table_raw);
-
-use common;
-use partition_table_raw;
-use partition_table_dos;
-use partition_table;
-use c;
-
-my %gpt_types = (
-  0x00 => "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
-  0x82 => "\x6d\xfd\x57\x06\xab\xa4\xc4\x43\x84\xe5\x09\x33\xc8\x4b\x4f\x4f",
-  0x83 => "\xA2\xA0\xD0\xEB\xE5\xB9\x33\x44\x87\xC0\x68\xB6\xB7\x26\x99\xC7",
-  0x8e => "\x79\xd3\xd6\xe6\x07\xf5\xc2\x44\xa2\x3c\x23\x8f\x2a\x3d\xf9\x28",
-  0xfd => "\x0f\x88\x9d\xa1\xfc\x05\x3b\x4d\xa0\x06\x74\x3f\x0f\x84\x91\x1e",
-  0xef => "\x28\x73\x2A\xC1\x1F\xF8\xd2\x11\xBA\x4B\x00\xA0\xC9\x3E\xC9\x3B",
-  # legacy_partition_table => "\x41\xEE\x4D\x02\xE7\x33\xd3\x11\x9D\x69\x00\x08\xC7\x81\xF3\x9F"
-  # PARTITION_MSFT_RESERVED_GUID "\x16\xE3\xC9\xE3\x5C\x0B\xB8\x4D\x81\x7D\xF9\x2D\xF0\x02\x15\xAE"
-  #PARTITION_RESERVED_GUID "\x39\x33\xa6\x8d\x07\x00\xc0\x60\xc4\x36\x08\x3a\xc8\x23\x09\x08"
-);
-
-my $current_revision = 0x00010200;
-my ($main_format, $main_fields) = list2kv(
-  a8    => 'magic',
-  V     => 'revision',
-  V     => 'headerSize',
-  V     => 'headerCRC32',
-  a4    => 'blank1',
-  Q     => 'myLBA',
-  Q     => 'alternateLBA',
-  Q     => 'firstUsableLBA',
-  Q     => 'lastUsableLBA',
-  a16   => 'guid',
-  Q     => 'partitionEntriesLBA',
-  V     => 'nbPartitions',
-  V     => 'partitionEntrySize',
-  V     => 'partitionEntriesCRC32',
-);
-
-my ($partitionEntry_format, $partitionEntry_fields) = list2kv(
-  a16   => 'gpt_type',
-  a16   => 'guid',
-  Q     => 'start',
-  Q     => 'ending',
-  a8    => 'efi_attributes',
-  a72   => 'name',
-);
-
-my ($guid_format, $guid_fields) = list2kv(
-  N     => 'time_low',
-  n     => 'time_mid',
-  n     => 'time_hi_and_version',
-  n     => 'clock_seq',
-  a6    => 'node',
-);
-
-$_ = join('', @$_) foreach $main_format, $partitionEntry_format, $guid_format;
-
-my $magic = "EFI PART";
-
-sub generate_guid {
-	local *F;
-	open F, devices::make("random") or die "Could not open /dev/random for GUID generation";
-	read F, $tmp, psizeof($guid_format);
-	close F;
-	
-	my %guid; @guid{@$guid_fields} = unpack $guid_format, $tmp;
-	$guid{clock_seq} = ($guid{clock_seq} & 0x3fff) | 0x8000;
-	$guid{time_hi_and_version} = ($guid{time_hi_and_version} & 0x0fff) | 0x4000;
-	pack($guid_format, @guid{@$guid_fields});
-}
-
-sub crc32 {
-    my ($buffer) = @_;
-
-    my $crc = 0xFFFFFFFF;
-    foreach (unpack "C*", $buffer) {
-	my $subcrc = ($crc ^ $_) & 0xFF;
-        for (my $j = 8; $j > 0; $j--){
-	    my $b = $subcrc & 1;
-	    $subcrc = ($subcrc >> 1) & 0x7FFFFFFF;
-	    $subcrc = $subcrc ^ 0xEDB88320 if $b;
-        }
-        $crc = ($crc >> 8) ^ $subcrc;
-    }
-    $crc ^ 0xFFFFFFFF;
-}
-
-sub compute_headerCRC32 {
-    my ($info) = @_;
-    local $info->{headerCRC32} = 0;
-    crc32(pack($main_format, @$info{@$main_fields}));
-}
-
-sub read_header {
-    my ($sector, $F) = @_;
-    my $tmp;
-
-    c::lseek_sector(fileno($F), $sector, 0) or die "reading of partition in sector $sector failed";
-
-    sysread $F, $tmp, psizeof($main_format) or die "error while reading partition table in sector $sector";
-    my %info; @info{@$main_fields} = unpack $main_format, $tmp;
-    
-    $info{magic} eq $magic or die "bad magic number";
-    $info{myLBA} == $sector or die "myLBA is not the same";
-    $info{headerSize} == psizeof($main_format) or die "bad partition table header size";
-    $info{partitionEntrySize} == psizeof($partitionEntry_format) or die "bad partitionEntrySize";
-    $info{revision} <= $current_revision or log::l("oops, this is a new GPT revision ($info{revision} > $current_revision)");
-
-    $info{headerCRC32} == compute_headerCRC32(\%info) or die "bad partition table checksum";
-    \%info
-}
-
-sub read_partitionEntries {
-    my ($info, $F) = @_;
-    my $tmp;
-
-    c::lseek_sector(fileno($F), $info->{partitionEntriesLBA}, 0) or die "can't seek to sector partitionEntriesLBA";
-    sysread $F, $tmp, psizeof($partitionEntry_format) * $info->{nbPartitions} or die "error while reading partition table in sector $info->{partitionEntriesLBA}";
-    $info->{partitionEntriesCRC32} == crc32($tmp) or die "bad partition entries checksum";
-
-    c::lseek_sector(fileno($F), $info->{partitionEntriesLBA}, 0) or die "can't seek to sector partitionEntriesLBA";
-    my %gpt_types_rev = reverse %gpt_types;
-    my @pt = 
-      map {
-	sysread $F, $tmp, psizeof($partitionEntry_format) or die "error while reading partition table in sector $info->{partitionEntriesLBA}";
-	my %h; @h{@$partitionEntry_fields} = unpack $partitionEntry_format, $tmp;
-	$h{size} = $h{ending} - $h{start} + 1;
-	$h{type} = $gpt_types_rev{$h{gpt_type}};
-	$h{type} = 0x100 if !defined $h{type};
-	\%h;
-    } (1 .. $info->{nbPartitions});
-    \@pt;
-}
-
-sub read {
-    my ($hd, $sector) = @_;
-    my $tmp;
-
-    my $l = partition_table_dos::read($hd, $sector);
-    my @l = grep { $_->{size} && $_->{type} && !partition_table::isExtended($_) } @$l;
-    @l == 1 or die "bad PMBR";
-    $l[0]{type} == 0xee or die "bad PMBR";
-    my $myLBA = $l[0]{start};
-
-    local *F; partition_table_raw::openit($hd, *F) or die "failed to open device";
-    my $info1 = eval { read_header($myLBA, *F) };
-    my $info2 = eval { read_header($info1->{alternateLBA} || $l[0]{start} + $l[0]{size} - 1, *F) }; #- what about using $hd->{totalsectors} ???
-    my $info = $info1 || { %$info2, myLBA => $info2->{alternateLBA}, alternateLBA => $info2->{myLBA}, partitionEntriesLBA => $info2->{alternateLBA} + 1 } or die;
-    my $pt = $info1 && $info2 ? 
-	eval { $info1 && read_partitionEntries($info1, *F) } || read_partitionEntries($info2, *F) :
-	read_partitionEntries($info, *F);
-    $hd->raw_removed($pt);
-
-    $pt, $info;
-}
-
-# write the partition table (and extended ones)
-# for each entry, it uses fields: start, size, type, active
-sub write {
-    my ($hd, $sector, $pt, $info) = @_;
-
-    foreach (@$pt) {
-	$_->{ending} = $_->{start} + $_->{size} - 1;
-	$_->{guid} ||= generate_guid;
-	$_->{gpt_type} = $gpt_types{$_->{type}} || $_->{gpt_type} || $gpt_types{0x83};
-    }
-    my $partitionEntries = join('', map {
-	pack($partitionEntry_format, @$_{@$partitionEntry_fields})	
-    } (@$pt, ({}) x ($info->{nbPartitions} - @$pt)));
-
-    $info->{partitionEntriesCRC32} = crc32($partitionEntries);
-    $info->{headerCRC32} = compute_headerCRC32($info);
-
-    my $info2 = { %$info, 
-		  myLBA => $info->{alternateLBA}, alternateLBA => $info->{myLBA}, 
-		  partitionEntriesLBA => $info->{alternateLBA} - psizeof($partitionEntry_format) * $info->{nbPartitions} / 512,
-		};
-    $info2->{headerCRC32} = compute_headerCRC32($info2);
-
-    {
-	# write the PMBR
-	my $pmbr = partition_table_dos::clear_raw();
-	$pmbr->{raw}[0] = { type => 0xee, local_start => $info->{myLBA}, size => $info->{alternateLBA} - $info->{myLBA} + 1 };
-	partition_table_dos::write($hd, $sector, $pmbr->{raw});
-    }
-
-    local *F;
-    partition_table_raw::openit($hd, *F, 2) or die "error opening device $hd->{device} for writing";
-    
-    c::lseek_sector(fileno(F), $info->{myLBA}, 0) or return 0;
-    #- pad with 0's
-    syswrite F, pack($main_format, @$info{@$main_fields}) . "\0" x 512, 512 or return 0;
-
-    c::lseek_sector(fileno(F), $info->{alternateLBA}, 0) or return 0;
-    #- pad with 0's
-    syswrite F, pack($main_format, @$info2{@$main_fields}) . "\0" x 512, 512 or return 0;
-
-    c::lseek_sector(fileno(F), $info->{partitionEntriesLBA}, 0) or return 0;
-    syswrite F, $partitionEntries or return 0;
-    
-    c::lseek_sector(fileno(F), $info2->{partitionEntriesLBA}, 0) or return 0;
-    syswrite F, $partitionEntries or return 0;
-
-    common::sync();
-    1;
-}
-
-sub raw_removed {
-    my ($hd, $raw) = @_;
-    @$raw = grep { $_->{size} && $_->{type} } @$raw;
-}
-sub can_raw_add {
-    my ($hd) = @_;
-    @{$hd->{primary}{raw}} < $hd->{primary}{info}{nbPartitions};
-}
-sub raw_add {
-    my ($hd, $raw, $part) = @_;
-    $hd->can_raw_add or die "raw_add: partition table already full";
-    push @$raw, $part;
-}
-
-sub adjustStart {}
-sub adjustEnd {}
-
-sub first_usable_sector {
-    my ($hd) = @_;
-    $hd->{primary}{info}{firstUsableLBA};
-}
-sub last_usable_sector { 
-    my ($hd) = @_;
-    $hd->{primary}{info}{lastUsableLBA} + 1;
-}
-
-sub info {
-    my ($hd) = @_;
-    my $nb_sect = 32;
-
-    #- build a default suitable partition table,
-    #- checksum will be built when writing on disk.
-    {
-	magic => $magic,
-	revision => $current_revision,
-	headerSize => psizeof($main_format),
-	myLBA => 1,
-	alternateLBA => $hd->{totalsectors} - 1,
-	firstUsableLBA => $nb_sect + 2,
-	lastUsableLBA => $hd->{totalsectors} - $nb_sect - 2,
-	guid => generate_guid,
-	partitionEntriesLBA => 2,
-	nbPartitions => $nb_sect * 512 / psizeof($partitionEntry_format),
-	partitionEntrySize => psizeof($partitionEntry_format),
-    };
-}
-
-sub clear_raw {
-    my ($hd) = @_;
-    { raw => [], info => info($hd) };
-}
-
-1;
diff --git a/perl-install/partition_table_mac.pm b/perl-install/partition_table_mac.pm
deleted file mode 100644
index d1f65a6db..000000000
--- a/perl-install/partition_table_mac.pm
+++ /dev/null
@@ -1,378 +0,0 @@
-package partition_table_mac; # $Id$
-
-use diagnostics;
-#use strict;   - fixed other PPC code to comply, but program bails on empty partition table - sbenedict
-use vars qw(@ISA $freepart_device $bootstrap_part $freepart_start $freepart_size $freepart_part $macos_part);
-
-@ISA = qw(partition_table_raw);
-
-use common;
-use partition_table_raw;
-use partition_table;
-use c;
-
-my %typeToDos = (
-  "Apple_partition_map" => 0x401,
-  "Apple_Bootstrap"	=> 0x401,
-  "Apple_Driver43"	=> 0x401,
-  "Apple_Driver_IOKit"	=> 0x401,
-  "Apple_Patches"	=> 0x401,
-  "Apple_HFS"		=> 0x402,
-  "Apple_UNIX_SVR2"	=> 0x83,
-  "Apple_Free"		=> 0x0,
-);
-my %typeFromDos = reverse %typeToDos;
-
-
-my ($bz_format, $bz_fields) = list2kv(
-  n	=> 'bzSig',
-  n	=> 'bzBlkSize',
-  N	=> 'bzBlkCnt',
-  n	=> 'bzDevType',
-  n	=> 'bzDevID',
-  N	=> 'bzReserved',
-  n	=> 'bzDrvrCnt',
-);
-$bz_format = join '', @$bz_format;
-
-
-my ($dd_format, $dd_fields) = list2kv(
-  N	=> 'ddBlock',
-  n	=> 'ddSize',
-  n	=> 'ddType',
-);
-$dd_format = join '', @$dd_format;
-
-
-my ($p_format, $p_fields) = list2kv(
-  n	=> 'pSig',
-  n	=> 'pSigPad',
-  N	=> 'pMapEntry',
-  N	=> 'pPBlockStart',
-  N	=> 'pPBlocks',
-
-  a32	=> 'pName',
-  a32	=> 'pType',
-
-  N	=> 'pLBlockStart',
-  N	=> 'pLBlocks',
-  N	=> 'pFlags',
-  N	=> 'pBootBlock',
-  N	=> 'pBootBytes',
-
-  N	=> 'pAddrs1',
-  N	=> 'pAddrs2',
-  N	=> 'pAddrs3',
-  N	=> 'pAddrs4',
-  N	=> 'pChecksum',
-
-  a16	=> 'pProcID',
-  a128	=> 'pBootArgs',
-  a248	=> 'pReserved',
-);
-$p_format = join '', @$p_format;
-
-my $magic = 0x4552;
-my $pmagic = 0x504D;
-
-sub first_usable_sector { 1 }
-
-sub adjustStart($$) {
-    my ($hd, $part) = @_;
-    my $end = $part->{start} + $part->{size};
-    my $partmap_end = $hd->{primary}{raw}[0]{size};
-
-    if ($part->{start} <= $partmap_end) {
-        $part->{start} = $partmap_end + 1;
-        $part->{size} = $end - $part->{start};
-    }
-}
-
-sub adjustEnd($$) {
-    my ($hd, $part) = @_;
-}
-
-sub read($$) {
-    my ($hd, $sector) = @_;
-    my $tmp;
-
-    local *F; partition_table_raw::openit($hd, *F) or die "failed to open device";
-    c::lseek_sector(fileno(F), $sector, 0) or die "reading of partition in sector $sector failed";
-
-    sysread F, $tmp, psizeof($bz_format) or die "error while reading bz \(Block Zero\) in sector $sector";
-    my %info; @info{@$bz_fields} = unpack $bz_format, $tmp;
-    my $i;
-
-    foreach $i (0 .. $info{bzDrvrCnt}-1) {
-        sysread F, $tmp, psizeof($dd_format) or die "error while reading driver data in sector $sector";
-        my %dd; @dd{@$dd_fields} = unpack $dd_format, $tmp;
-        push @{$info{ddMap}}, \%dd;
-    }
-
-    #- check magic number
-    $info{bzSig}  == $magic or die "bad magic number";
-
-    my $numparts;
-    c::lseek_sector(fileno(F), $sector, 516) or die "reading of partition in sector $sector failed";
-    sysread F, $tmp, 4 or die "error while reading partition info in sector $sector";
-    $numparts = unpack "N", $tmp;
-
-    my $partmapsize;
-    c::lseek_sector(fileno(F), $sector, 524) or die "reading of partition in sector $sector failed";
-    sysread F, $tmp, 4 or die "error while reading partition info in sector $sector";
-    $partmapsize = ((unpack "N", $tmp) * $info{bzBlkSize}) / psizeof($p_format);
-
-    c::lseek_sector(fileno(F), $sector, 512) or die "reading of partition in sector $sector failed";
-
-    my @pt;
-    for ($i=0;$i<$partmapsize;$i++) {
-    	my $part;
-        sysread F, $part, psizeof($p_format) or die "error while reading partition info in sector $sector";
-
-        push @pt, map {
-            my %h; @h{@$p_fields} = unpack $p_format, $part;
-            if ($i < $numparts && $h{pSig} eq $pmagic) {
-
-                $h{size} = ($h{pPBlocks} * $info{bzBlkSize}) / 512;
-                $h{start} = ($h{pPBlockStart} * $info{bzBlkSize}) / 512;
-
-                if ($h{pType} =~ /^Apple_UNIX_SVR2/i) {
-                    $h{pName} =~ /swap/i ? ($h{type} = 0x82) : ($h{type} = 0x83);
-                } elsif ($h{pType} =~ /^Apple_Free/i) {
-                	#- need to locate a 1MB partition to setup a bootstrap on
-                	if (defined $freepart_start && $freepart_size >= 1) {
-                		#- already found a suitable partition
-                	} else {
-                		$freepart_start = $h{start};
-                		$freepart_size = $h{size}/2048;
-                		$freepart_device = $hd;
-                		$freepart_part = "/dev/" . $hd->{device} . ($i+1);
-                		log::l("free apple partition found on drive /dev/$freepart_device->{device}, block $freepart_start, size $freepart_size");
-                	}
-			$h{type} = 0x0;
-			$h{pName} = 'Extra';                    
-                } elsif ($h{pType} =~ /^Apple_HFS/i) {
-                 	$h{type} = 0x402;
-                 	if (defined $macos_part) {		
-                 		#- swag at identifying MacOS - 1st HFS partition
-                 	} else {	
-                 		$macos_part = "/dev/" . $hd->{device} . ($i+1);
-                 		log::l("found MacOS at partition $macos_part");
-                 	}
-                } elsif ($h{pType} =~ /^Apple_Partition_Map/i) {
-                 	$h{type} = 0x401;
-                 	$h{isMap} = 1;
-                } elsif ($h{pType} =~ /^Apple_Bootstrap/i) {
-                 	$h{type} = 0x401;
-                 	$h{isBoot} = 1;
-                 	if (defined $bootstrap_part) {
-                 		#found a bootstrap already - use it, but log the find
-                 		log::l("found another apple bootstrap at partition /dev/$hd->{device}" . ($i+1));
-                 	} else {
-                 		$bootstrap_part = "/dev/" . $hd->{device} . ($i+1);
-                 		log::l("found apple bootstrap at partition $bootstrap_part");
-                 	}
-                } else {
-                 	$h{type} = 0x401;
-                     $h{isDriver} = 1;
-                };
-
-                # Let's see if this partition is a driver.
-                foreach (@{$info{ddMap}}) {
-                    $_->{ddBlock} == $h{pPBlockStart} and $h{isDriver} = 1;
-                }
-
-            }
-            \%h;
-        } [ $part ];
-    };
-
-    [ @pt ], \%info;
-}
-
-sub write($$$;$) {
-    my ($hd, $sector, $pt, $info) = @_;
-
-    #- handle testing for writing partition table on file only!
-    local *F;
-    if ($::testing) {
-	my $file = "/tmp/partition_table_$hd->{device}";
-	open F, ">$file" or die "error opening test file $file";
-    } else {
-	partition_table_raw::openit($hd, *F, 2) or die "error opening device $hd->{device} for writing";
-        c::lseek_sector(fileno(F), $sector, 0) or return 0;
-    }
-
-    # Find the partition map.
-    my @partstowrite;
-    my $part = $pt->[0];
-    (defined $part->{isMap}) or die "the first partition is not the partition map";
-    push @partstowrite, $part;
-
-    # Now go thru the partitions, sort and fill gaps.
-    my $last;
-    while ($part) {
-        $last = $part;
-        $part = &partition_table::next($hd, $part);
-        $part or last;
-
-        if ($last->{start} + $last->{size} < $part->{start}) {
-            #There is a gap between partitions.  Fill it and move on.
-            push @partstowrite, {
-                type => 0x0,
-                start => $last->{start} + $last->{size},
-                size => $part->{start} - ($last->{start} + $last->{size}),
-            };
-        }
-        push @partstowrite, $part;
-    };
-
-    # now, fill a gap at the end if there is one.
-    if ($last->{start} + $last->{size} < $hd->{totalsectors}) {
-        push @partstowrite, {
-            type => 0x0,
-            start => $last->{start} + $last->{size},
-            size => $hd->{totalsectors} - ($last->{start} + $last->{size}),
-     	};
-    }
-
-    # Since we didn't create any new drivers, let's try and match up our driver records with out partitons and see if any are missing.
-    $info->{bzDrvrCnt} = 0;
-    my @ddstowrite;
-    my $dd;
-    foreach $dd (@{$info->{ddMap}}) {
-        foreach (@partstowrite) {
-            if ($dd->{ddBlock} == $_->{pPBlockStart}) {
-            	push @ddstowrite, $dd;
-            	$info->{bzDrvrCnt}++;
-            	last;
-            }
-        }
-    }
-
-    # Now let's write our first block.
-    syswrite F, pack($bz_format, @$info{@$bz_fields}), psizeof($bz_format) or return 0;
-
-    # ...and now the driver information.
-    foreach (@ddstowrite) {
-        syswrite F, pack($dd_format, @$_{@$dd_fields}), psizeof($dd_format) or return 0;
-    }
-    # zero the rest of the data in the first block.
-    foreach ( 1 .. (494 - ((@ddstowrite) * 8))) {
-     	syswrite F, "\0", 1 or return 0;
-    }
-    #c::lseek_sector(fileno(F), $sector, 512) or return 0;
-    # Now, we iterate thru the partstowrite and write them.
-    foreach (@partstowrite) {
-        if (!defined $_->{pSig}) {
-            # The values we need to write to disk are not defined.  Let's make them up.
-            $_->{pSig} = $pmagic;
-            $_->{pSigPad} = 0;
-            $_->{pPBlockStart} = ($_->{start} * 512) / $info->{bzBlkSize};
-            $_->{pPBlocks} = ($_->{size} * 512) / $info->{bzBlkSize};
-            $_->{pLBlockStart} = 0;
-            $_->{pLBlocks} = $_->{pPBlocks};
-            $_->{pBootBlock} = 0;
-            $_->{pBootBytes} = 0;
-            $_->{pAddrs1} = 0;
-            $_->{pAddrs2} = 0;
-            $_->{pAddrs3} = 0;
-            $_->{pAddrs4} = 0;
-            $_->{pChecksum} = 0;
-            $_->{pProcID} = "\0";
-            $_->{pBootArgs} = "\0";
-            $_->{pReserved} = "\0";
-
-            if ($_->{type} == 0x402) {
-                $_->{pType} = "Apple_HFS";
-                $_->{pName} = "MacOS";
-                $_->{pFlags} = 0x4000037F;
-            } elsif ($_->{type} == 0x401 && $_->{start} == 1) {
-                $_->{pType} = "Apple_Partition_Map";
-                $_->{pName} = "Apple";
-                $_->{pFlags} = 0x33;
-            } elsif ($_->{type} == 0x401) {
-                $_->{pType} = "Apple_Bootstrap";
-                $_->{pName} = "bootstrap";
-                $_->{pFlags} = 0x33;
-		$_->{isBoot} = 1;
-		log::l("writing a bootstrap at /dev/$_->{device}");
-		$install_steps_interactive::new_bootstrap = 1 if !(defined $partition_table_mac::bootstrap_part);
-		$bootstrap_part = "/dev/" . $_->{device};
-            } elsif ($_->{type} == 0x82) {
-                $_->{pType} = "Apple_UNIX_SVR2";
-                $_->{pName} = "swap";
-                $_->{pFlags} = 0x33;
-            } elsif ($_->{type} == 0x83) {
-                $_->{pType} = "Apple_UNIX_SVR2";
-                $_->{pName} = "Linux Native";
-                $_->{pFlags} = 0x33;
-            } elsif ($_->{type} == 0x0) {
-                $_->{pType} = "Apple_Free";
-                $_->{pName} = "Extra";
-                $_->{pFlags} = 0x31;
-            }
-        };
-        $_->{pMapEntry} = @partstowrite;
-        syswrite F, pack($p_format, @$_{@$p_fields}), psizeof($p_format) or return 0;
-    }
-
-    common::sync();
-
-    1;
-}
-
-sub info {
-    my ($hd) = @_;
-
-    # - Build the first block of the drive.
-
-    my $info = {
-	bzSig => $magic,
-	bzBlkSize => 512,
-	bzBlkCnt => $hd->{totalsectors},
-	bzDevType => 0,
-	bzDevID => 0,
-	bzReserved => 0,
-	bzDrvrCnt => 0,
-    };
-
-    $info;
-}
-
-sub clear_raw {
-    my ($hd) = @_;
-    my @oldraw = @{$hd->{primary}{raw}};
-    my $pt = { raw => [ ({}) x 63 ], info => info($hd) };
-
-    #- handle special case for partition 1 which is the partition map.
-    $pt->{raw}[0] = {
-        type => 0x401,
-        start => 1,
-        size => 63,
-        isMap => 1,
-    };
-#	$pt->{raw}[1] = {
-#		type => 0x0,
-#		start => 64,
-#		size => $hd->{totalsectors} - 64,
-#		isMap => 0,
-#	};
-    push @{$pt->{normal}}, $pt->{raw}[0];
-#	push @{$pt->{normal}}, $pt->{raw}[1];
-
-    #- Recover any Apple Drivers, if any.
-    my $i = 1;
-    foreach (@oldraw) {
-        if (defined $_->{isDriver}) {
-            $pt->{raw}[$i] = $_;
-            push @{$pt->{normal}}, $pt->{raw}[$i];
-            $i++;
-        }
-    };
-    @{$pt->{info}{ddMap}} = @{$hd->{primary}{info}{ddMap}};
-
-    $pt;
-}
-
-1;
diff --git a/perl-install/partition_table_raw.pm b/perl-install/partition_table_raw.pm
deleted file mode 100644
index 1087d7fbb..000000000
--- a/perl-install/partition_table_raw.pm
+++ /dev/null
@@ -1,191 +0,0 @@
-package partition_table_raw; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use devices;
-use detect_devices;
-use log;
-use c;
-
-my @MBR_signatures = (
-if_(arch() =~ /ppc/,
-    map { [ 'yaboot', 0, "PM", 0x200 * $_ + 0x10, "bootstrap\0" ] } 0 .. 61
-),
-    [ 'empty', 0, "\0\0\0\0" ],
-    [ 'grub', 0, "\xEBG", 0x17d, "stage1 \0" ],
-    [ 'grub', 0, "\xEBH", 0x17e, "stage1 \0" ],
-    [ 'grub', 0, "\xEBH", 0x18a, "stage1 \0" ],
-    [ 'grub', 0, "\xEBH", 0x181, "GRUB \0" ],
-    [ 'lilo', 0x2,  "LILO" ],
-    [ 'lilo', 0x6,  "LILO" ],
-    [ 'osbs', 0x2,  "OSBS" ], #- http://www.prz.tu-berlin.de/~wolf/os-bs.html
-    [ 'pqmagic', 0xef, "PQV" ],
-    [ 'BootStar', 0x130, "BootStar:" ],
-    [ 'DocsBoot', 0x148, 'DocsBoot' ],
-    [ 'system_commander', 0x1ad, "SYSCMNDRSYS" ],
-    [ 'Be Os', 0x24, 'Boot Manager' ],
-    [ 'TimO', 0, 'IBM Thinkpad hibernation partition' ],
-    [ 'dos', 0xa0, "\x25\x03\x4E\x02\xCD\x13" ],
-    [ 'dos', 0xa0, "\x00\xB4\x08\xCD\x13\x72" ], #- nt2k's
-    [ 'dos', 0x60, "\xBB\x00\x7C\xB8\x01\x02\x57\xCD\x13\x5F\x73\x0C\x33\xC0\xCD\x13" ], #- nt's
-    [ 'dos', 0x70, "\x0C\x33\xC0\xCD\x13\x4F\x75\xED\xBE\xA3" ],
-    [ 'freebsd', 0xC0, "\x00\x30\xE4\xCD\x16\xCD\x19\xBB\x07\x00\xB4" ],
-    [ 'freebsd', 0x160, "\x6A\x10\x89\xE6\x48\x80\xCC\x40\xCD\x13" ],
-    [ 'dummy', 0xAC, "\x0E\xB3\x07\x56\xCD\x10\x5E\xEB" ], #- caldera?
-    [ 'ranish', 0x100, "\x6A\x10\xB4\x42\x8B\xF4\xCD\x13\x8B\xE5\x73" ],
-    [ 'os2', 0x1c2, "\xA" ],
-);
-
-sub typeOfMBR($) { typeFromMagic(devices::make($_[0]), @MBR_signatures) }
-sub typeOfMBR_($) { typeFromMagic($_[0], @MBR_signatures) }
-
-sub hasExtended { 0 }
-
-sub cylinder_size($) {
-    my ($hd) = @_;
-    $hd->{geom}{sectors} * $hd->{geom}{heads};
-}
-sub first_usable_sector { 1 }
-sub last_usable_sector { 
-    my ($hd) = @_;
-    $hd->{totalsectors};
-}
-
-#- default method for starting a partition, only head size or twice
-#- is allowed for starting a partition after a cylinder boundarie.
-sub adjustStart($$) {
-    my ($hd, $part) = @_;
-    my $end = $part->{start} + $part->{size};
-
-    $part->{start} = round_up($part->{start},
-			      $part->{start} % cylinder_size($hd) < 2 * $hd->{geom}{sectors} ?
-   			      $hd->{geom}{sectors} : cylinder_size($hd));
-    $part->{size} = $end - $part->{start};
-    $part->{size} > 0 or die "adjustStart get a too small partition to handle correctly";
-}
-#- adjusting end to match a cylinder boundary, two methods are used and must
-#- match at the end, else something is wrong and nothing will be done on
-#- partition table.
-#- $end2 is computed by removing 2 (or only 1 if only 2 heads on drive) groups
-#- of sectors, this is necessary to handle extended partition where logical
-#- partition start after 1 (or 2 accepted) groups of sectors (typically 63).
-#- $end is floating (is not on cylinder boudary) so we have to choice a good
-#- candidate, $end1 or $end2 should always be good except $end1 for small
-#- partition size.
-sub adjustEnd($$) {
-    my ($hd, $part) = @_;
-    my $end = $part->{start} + $part->{size};
-    $end > $hd->{geom}{cylinders} * cylinder_size($hd) && $end <= $hd->{totalsectors} and return;
-    my $end1 = round_down($end, cylinder_size($hd));
-    my $end2 = round_up($end - ($hd->{geom}{heads} > 2 ? 2 : 1) * $hd->{geom}{sectors}, cylinder_size($hd));
-    $end2 <= $hd->{geom}{cylinders} * cylinder_size($hd) or die "adjustEnd go beyond end of device geometry ($end2 > $hd->{totalsectors})";
-    $part->{size} = ($end1 - $part->{start} > cylinder_size($hd) ? $end1 : $end2) - $part->{start};
-    $part->{size} > 0 or die "adjustEnd get a too small partition to handle correctly";
-}
-
-sub get_geometry($) {
-    my ($dev) = @_;
-    my $g = "";
-
-    local *F; sysopen F, $dev, 0 or return;
-    ioctl(F, c::HDIO_GETGEO(), $g) or return;
-    my %geom; @geom{qw(heads sectors cylinders start)} = unpack "CCSL", $g;
-    $geom{totalcylinders} = $geom{cylinders};
-
-    my $total;
-    #- $geom{cylinders} is no good (only a ushort, that means less than 2^16 => at best 512MB)
-    if ($total = c::total_sectors(fileno F)) {
-	$geom{cylinders} = int $total / $geom{heads} / $geom{sectors};
-    } else {
-	$total = $geom{heads} * $geom{sectors} * $geom{cylinders}
-    }
-
-    { geom => \%geom, totalsectors => $total };
-}
-
-sub openit($$;$) { sysopen $_[1], $_[0]{file}, $_[2] || 0; }
-
-# cause kernel to re-read partition table
-sub kernel_read($) {
-    my ($hd) = @_;
-    common::sync();
-    local *F; openit($hd, *F) or return 0;
-    common::sync(); sleep(1);
-    $hd->{rebootNeeded} = !ioctl(F, c::BLKRRPART(), 0);
-    common::sync();
-    close F;
-    common::sync(); sleep(1);
-}
-
-sub raw_removed {
-    my ($hd, $raw) = @_;
-}
-sub can_raw_add {
-    my ($hd) = @_;
-    $_->{size} || $_->{type} or return 1 foreach @{$hd->{primary}{raw}};
-    0;
-}
-sub raw_add {
-    my ($hd, $raw, $part) = @_;
-
-    foreach (@$raw) {
-	$_->{size} || $_->{type} and next;
-	$_ = $part;
-	return;
-    }
-    die "raw_add: partition table already full";
-}
-
-sub zero_MBR {
-    my ($hd) = @_;
-    #- force the standard partition type for the architecture
-    my $type = arch() =~ /ia64/ ? 'gpt' : arch() eq "alpha" ? "bsd" : arch() =~ /^sparc/ ? "sun" : arch() eq "ppc" ? "mac" : "dos";
-    #- override standard mac type on PPC for IBM machines to dos
-    $type = "dos" if (arch() =~ /ppc/ && detect_devices::get_mac_model() =~ /^IBM/);
-    require("partition_table_$type.pm");
-    bless $hd, "partition_table_$type";
-    $hd->{primary} = $hd->clear_raw();
-    delete $hd->{extended};
-}
-
-sub zero_MBR_and_dirty {
-    my ($hd) = @_;
-    zero_MBR($hd);
-    $hd->{isDirty} = $hd->{needKernelReread} = 1;
-
-}
-
-#- ugly stuff needed mainly for Western Digital IDE drives
-#- try writing what we've just read, yells if it fails
-#- testing on last sector of head #0 (unused in 99% cases)
-#-
-#- return false if the device can't be written to (especially for Smartmedia)
-sub test_for_bad_drives {
-    my ($hd) = @_;
-
-    log::l("test_for_bad_drives($hd->{file})");
-    my $sector = $hd->{geom}{sectors} - 1;
-    
-
-    local *F; openit($hd, *F, 2) or die "can't open device";
-
-    my $seek = sub {
-	c::lseek_sector(fileno(F), $sector, 0) or die "seeking to sector $sector failed";
-    };
-    my $tmp;
-
-    &$seek; sysread F, $tmp, $SECTORSIZE or die "test_for_bad_drives: can't even read ($!)";
-    &$seek; syswrite F, $tmp or die "test_for_bad_drives: can't even write ($!)";
-
-    my $tmp2;
-    &$seek; sysread F, $tmp2, $SECTORSIZE or die "test_for_bad_drives: can't even read again ($!)";
-    $tmp eq $tmp2 or die
-_("Something bad is happening on your drive. 
-A test to check the integrity of data has failed. 
-It means writing anything on the disk will end up with random trash");
-    1;
-}
-
-1;
diff --git a/perl-install/partition_table_sun.pm b/perl-install/partition_table_sun.pm
deleted file mode 100644
index 75025b503..000000000
--- a/perl-install/partition_table_sun.pm
+++ /dev/null
@@ -1,201 +0,0 @@
-package partition_table_sun; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(partition_table_raw);
-
-use common;
-use partition_table_raw;
-use partition_table;
-use c;
-
-my ($main_format, $main_fields) = list2kv(
-  a128  => 'info',
-  a14   => 'spare0',
-  a32   => 'infos',
-  a246  => 'spare1',
-  n     => 'rspeed',
-  n     => 'pcylcount',
-  n     => 'sparecyl',
-  a4    => 'spare2',
-  n     => 'ilfact',
-  n     => 'ncyl',
-  n     => 'nacyl',
-  n     => 'ntrks',
-  n     => 'nsect',
-  a4    => 'spare3',
-  a64   => 'partitions',
-  n     => 'magic',
-  n     => 'csum',
-);
-$main_format = join '', @$main_format;
-
-my ($fields1, $fields2) = ([ qw(type flags) ], [ qw(start_cylinder size) ]);
-my ($format1, $format2) = ("xCxC", "N2");
-my ($size1, $size2) = map { psizeof($_) } ($format1, $format2);
-my $magic = 0xDABE;
-my $nb_primary = 8;
-my $offset = 0;
-
-sub adjustStart($$) {
-    my ($hd, $part) = @_;
-    my $end = $part->{start} + $part->{size};
-
-    #- since partition must always start on cylinders boundaries on sparc,
-    #- note that if start sector is on the first cylinder, it is adjusted
-    #- to 0 and it is valid, cylinder 0 bug is from bad define for sparc
-    #- compilation of mke2fs combined with a blind kernel...
-    $part->{start} = round_down($part->{start}, $hd->cylinder_size());
-    $part->{size} = $end - $part->{start};
-    $part->{size} = $hd->cylinder_size() if $part->{size} <= 0;
-}
-sub adjustEnd($$) {
-    my ($hd, $part) = @_;
-    my $end = $part->{start} + $part->{size};
-    my $end2 = round_up($end, $hd->cylinder_size());
-    $end2 = $hd->{geom}{cylinders} * $hd->cylinder_size() if $end2 > $hd->{geom}{cylinders} * $hd->cylinder_size();
-    $part->{size} = $end2 - $part->{start};
-}
-
-#- compute crc checksum used for Sun Label partition, expect
-#- $tmp to be the 512 bytes buffer to be read/written to MBR.
-sub compute_crc($) {
-    my ($tmp) = @_;
-    my @l2b = unpack "n256", $tmp;
-    my $crc = 0;
-
-    map { $crc ^= $_ } @l2b;
-
-    $crc;
-}
-
-sub read($$) {
-    my ($hd, $sector) = @_;
-    my $tmp;
-
-    local *F; partition_table_raw::openit($hd, *F) or die "failed to open device";
-    c::lseek_sector(fileno(F), $sector, $offset) or die "reading of partition in sector $sector failed";
-
-    sysread F, $tmp, psizeof($main_format) or die "error while reading partition table in sector $sector";
-    my %info; @info{@$main_fields} = unpack $main_format, $tmp;
-
-    #- check magic number
-    $info{magic}  == $magic or die "bad magic number";
-
-    #- check crc, csum contains the crc so result should be 0.
-    compute_crc($tmp) == 0 or die "bad checksum";
-
-    @{$hd->{geom}}{qw(cylinders heads sectors)} = @info{qw(ncyl ntrks nsect)};
-
-    my @pt;
-    my @infos_up = unpack $format1 x $nb_primary, $info{infos};
-    my @partitions_up = unpack $format2 x $nb_primary, $info{partitions};
-    for (0..$nb_primary-1) {
-	my $h = { type => $infos_up[2 * $_], flag => $infos_up[1 + 2 * $_],
-		  start_cylinder => $partitions_up[2 * $_], size => $partitions_up[1 + 2 * $_] };
-	$h->{start} = $sector + $h->{start_cylinder} * $hd->cylinder_size();
-	$h->{type} && $h->{size} or $h->{$_} = 0 foreach keys %$h;
-	push @pt, $h;
-    }
-
-#- this code is completely broken by null char inside strings, it gets completely crazy :-)
-#    my @pt = mapn {
-#	my %h; 
-#	@h{@$fields1} = unpack $format1, $_[0];
-#	@h{@$fields2} = unpack $format2, $_[1];
-#	$h{start} = $sector + $h{start_cylinder} * $hd->cylinder_size();
-#	$h{type} && $h{size} or $h{$_} = 0 foreach keys %h;
-#	\%h;
-#    } [ grep { $_ } split /(.{$size1})/o, $info{infos} ], [ grep { $_ } split /(.{$size2})/o, $info{partitions} ];
-
-    [ @pt ], \%info;
-}
-
-# write the partition table (and extended ones)
-# for each entry, it uses fields: start, size, type, active
-sub write($$$;$) {
-    my ($hd, $sector, $pt, $info) = @_;
-#    my ($csize, $wdsize) = (0, 0);
-
-    #- handle testing for writing partition table on file only!
-    local *F;
-    if ($::testing) {
-	my $file = "/tmp/partition_table_$hd->{device}";
-	open F, ">$file" or die "error opening test file $file";
-    } else {
-	partition_table_raw::openit($hd, *F, 2) or die "error opening device $hd->{device} for writing";
-        c::lseek_sector(fileno(F), $sector, $offset) or return 0;
-    }
-
-    ($info->{infos}, $info->{partitions}) = map { join '', @$_ } list2kv map {
-	$_->{start} % $hd->cylinder_size() == 0 or die "partition not at beginning of cylinder";
-#	$csize += $_->{size} if $_->{type} != 5;
-#	$wdsize += $_->{size} if $_->{type} == 5;
-	$_->{flags} |= 0x10 if $_->{mntpoint} eq '/';
-	$_->{flags} |= 0x01 if partition_table::isSwap($_);
-	local $_->{start_cylinder} = $_->{start} / $hd->cylinder_size() - $sector;
-	pack($format1, @$_{@$fields1}), pack($format2, @$_{@$fields2});
-    } @$pt;
-#    $csize == $wdsize or die "partitions are not using whole disk space";
-
-    #- compute the checksum by building the buffer to write and call compute_crc.
-    #- set csum to 0 so compute_crc will give the right csum value.
-    $info->{csum} = 0;
-    $info->{csum} = compute_crc(pack($main_format, @$info{@$main_fields}));
-
-    syswrite F, pack($main_format, @$info{@$main_fields}), psizeof($main_format) or return 0;
-
-    common::sync();
-
-    1;
-}
-
-sub info {
-    my ($hd) = @_;
-
-    #- take care of reduction of the number of cylinders, avoid loop of reduction!
-    unless ($hd->{geom}{totalcylinders} > $hd->{geom}{cylinders}) {
-	$hd->{geom}{totalcylinders} = $hd->{geom}{cylinders};
-	$hd->{geom}{cylinders} -= 2;
-
-	#- rebuild some constants according to number of cylinders.
-	$hd->{totalsectors} = $hd->{geom}{heads} * $hd->{geom}{sectors} * $hd->{geom}{cylinders};
-    }
-
-    #- build a default suitable partition table,
-    #- checksum will be built when writing on disk.
-    #- note third partition is ALWAYS of type Whole disk.
-    my $info = {
-	info => "DiskDrake partition table",
-	rspeed => 5400,
-	pcylcount => $hd->{geom}{totalcylinders},
-	sparecyl => 0,
-	ilfact => 1,
-	ncyl => $hd->{geom}{cylinders},
-	nacyl => $hd->{geom}{totalcylinders} - $hd->{geom}{cylinders},
-	ntrks => $hd->{geom}{heads},
-	nsect => $hd->{geom}{sectors},
-	magic => $magic,
-    };
-
-    $info;
-}
-
-sub clear_raw {
-    my ($hd) = @_;
-    my $pt = { raw => [ ({}) x $nb_primary ], info => info($hd) };
-
-    #- handle special case for partition 2 which is whole disk.
-    $pt->{raw}[2] = {
-	type => 5, #- the whole disk type.
-	flags => 0,
-	start_cylinder => 0,
-	size => $hd->{geom}{cylinders} * $hd->cylinder_size(),
-    };
-
-    $pt;
-}
-
-1;
diff --git a/perl-install/perl2etags b/perl-install/perl2etags
deleted file mode 100755
index 6eed722c0..000000000
--- a/perl-install/perl2etags
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/usr/bin/perl -p
-
-if (/^/ ... !/^/) {
-    ($package) = /(.*).pm,/;
-    $package =~ s|/|::|g;
-}
-
-s/(\x7F)(sub\s+)?(\w+)(\([^)]*\))?/$1${package}::$3/;
diff --git a/perl-install/pixmaps/X.png b/perl-install/pixmaps/X.png
deleted file mode 100644
index c355a6c67..000000000
--- a/perl-install/pixmaps/X.png
+++ /dev/null
diff --git a/perl-install/pixmaps/arrow_down.xpm b/perl-install/pixmaps/arrow_down.xpm
deleted file mode 100644
index 30cca10b1..000000000
--- a/perl-install/pixmaps/arrow_down.xpm
+++ /dev/null
@@ -1,14 +0,0 @@
-/* XPM */
-static char * arrow_down_xpm[] = {
-"6 8 3 1",
-" 	c None",
-".	c #BABEDA",
-"+	c #000000",
-"..++..",
-"..++..",
-"..++..",
-"..++..",
-"++++++",
-"++++++",
-".++++.",
-"..++.."};
diff --git a/perl-install/pixmaps/arrow_up.xpm b/perl-install/pixmaps/arrow_up.xpm
deleted file mode 100644
index fc3c53131..000000000
--- a/perl-install/pixmaps/arrow_up.xpm
+++ /dev/null
@@ -1,14 +0,0 @@
-/* XPM */
-static char * arrow_up_xpm[] = {
-"6 8 3 1",
-" 	c None",
-".	c #999ABD",
-"+	c #000000",
-"..++..",
-".++++.",
-"++++++",
-"++++++",
-"..++..",
-"..++..",
-"..++..",
-"..++.."};
diff --git a/perl-install/pixmaps/bootdisk.png b/perl-install/pixmaps/bootdisk.png
deleted file mode 100644
index 0d29e613d..000000000
--- a/perl-install/pixmaps/bootdisk.png
+++ /dev/null
diff --git a/perl-install/pixmaps/bootloader.png b/perl-install/pixmaps/bootloader.png
deleted file mode 100644
index 03c2010f7..000000000
--- a/perl-install/pixmaps/bootloader.png
+++ /dev/null
diff --git a/perl-install/pixmaps/colors.png b/perl-install/pixmaps/colors.png
deleted file mode 100644
index 8de1929b4..000000000
--- a/perl-install/pixmaps/colors.png
+++ /dev/null
diff --git a/perl-install/pixmaps/colors16.png b/perl-install/pixmaps/colors16.png
deleted file mode 100644
index 76de54753..000000000
--- a/perl-install/pixmaps/colors16.png
+++ /dev/null
diff --git a/perl-install/pixmaps/colors8.png b/perl-install/pixmaps/colors8.png
deleted file mode 100644
index 904517e2f..000000000
--- a/perl-install/pixmaps/colors8.png
+++ /dev/null
diff --git a/perl-install/pixmaps/default.png b/perl-install/pixmaps/default.png
deleted file mode 100644
index bcbca644d..000000000
--- a/perl-install/pixmaps/default.png
+++ /dev/null
diff --git a/perl-install/pixmaps/eth_card_mini.png b/perl-install/pixmaps/eth_card_mini.png
deleted file mode 100644
index 0af32dbaf..000000000
--- a/perl-install/pixmaps/eth_card_mini.png
+++ /dev/null
diff --git a/perl-install/pixmaps/exit.png b/perl-install/pixmaps/exit.png
deleted file mode 100644
index 7e4e1e1d5..000000000
--- a/perl-install/pixmaps/exit.png
+++ /dev/null
diff --git a/perl-install/pixmaps/harddrive.png b/perl-install/pixmaps/harddrive.png
deleted file mode 100644
index d0b4adf71..000000000
--- a/perl-install/pixmaps/harddrive.png
+++ /dev/null
diff --git a/perl-install/pixmaps/keyboard.png b/perl-install/pixmaps/keyboard.png
deleted file mode 100644
index e5ce33e37..000000000
--- a/perl-install/pixmaps/keyboard.png
+++ /dev/null
diff --git a/perl-install/pixmaps/language.png b/perl-install/pixmaps/language.png
deleted file mode 100644
index 0ad06711f..000000000
--- a/perl-install/pixmaps/language.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-1024.png b/perl-install/pixmaps/monitor-1024.png
deleted file mode 100644
index 6ed801825..000000000
--- a/perl-install/pixmaps/monitor-1024.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-1280.png b/perl-install/pixmaps/monitor-1280.png
deleted file mode 100644
index b338ecb28..000000000
--- a/perl-install/pixmaps/monitor-1280.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-640.png b/perl-install/pixmaps/monitor-640.png
deleted file mode 100644
index e0738b936..000000000
--- a/perl-install/pixmaps/monitor-640.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-800.png b/perl-install/pixmaps/monitor-800.png
deleted file mode 100644
index 04f4b861c..000000000
--- a/perl-install/pixmaps/monitor-800.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor.png b/perl-install/pixmaps/monitor.png
deleted file mode 100644
index bacf844ba..000000000
--- a/perl-install/pixmaps/monitor.png
+++ /dev/null
diff --git a/perl-install/pixmaps/mouse.png b/perl-install/pixmaps/mouse.png
deleted file mode 100644
index dfd58624a..000000000
--- a/perl-install/pixmaps/mouse.png
+++ /dev/null
diff --git a/perl-install/pixmaps/mouse_3b+.xpm b/perl-install/pixmaps/mouse_3b+.xpm
deleted file mode 100644
index b424fc722..000000000
--- a/perl-install/pixmaps/mouse_3b+.xpm
+++ /dev/null
@@ -1,386 +0,0 @@
-/* XPM */
-static char * mouse_3b+_xpm[] = {
-"210 350 33 1",
-" 	c None",
-".	c #020202",
-"+	c #142753",
-"@	c #FE9A02",
-"#	c #BD8B25",
-"$	c #9E9EC1",
-"%	c #525E81",
-"&	c #F2AD19",
-"*	c #A3A4C3",
-"=	c #7B673F",
-"-	c #6F7892",
-";	c #4B5576",
-">	c #FEB212",
-",	c #77819E",
-"'	c #FEBA20",
-")	c #414A66",
-"!	c #F2B226",
-"~	c #AF8F4B",
-"{	c #E6AA32",
-"]	c #F2B22A",
-"^	c #384365",
-"/	c #0A1128",
-"(	c #33395F",
-"_	c #8089A6",
-":	c #AEB2CF",
-"<	c #898BA4",
-"[	c #0F1C3D",
-"}	c #BABEDA",
-"|	c #6D6E91",
-"1	c #A9ADCA",
-"2	c #283861",
-"3	c #999ABD",
-"4	c #606C8C",
-"                                                                                                |4;-333[/[                                                                                                        ",
-"                                                                                                44;,333[[/                                                                                                        ",
-"                                                                                                44)_33-[/[                                                                                                        ",
-"                                                                                                4%;_33-[[/                                                                                                        ",
-"                                                                                                4%)3334[/[                                                                                                        ",
-"                                                                                                %4)$33;[/                                                                                                         ",
-"                                                                                                4%;$33;[/                                                                                                         ",
-"                                                                                                %%%333)[[                                                                                                         ",
-"                                                                                                %%%3332[/                                                                                                         ",
-"                                                                                                %%%3332[/                                                                                                         ",
-"                                                                                                %%%$332[/                                                                                                         ",
-"                                                                                               |%;-33<2[[                                                                                                         ",
-"                                                                                               4%;|333[//                                                                                                         ",
-"                                                                                               %%)4333[[[                                                                                                         ",
-"                                                                                               4;;|33<[/[                                                                                                         ",
-"                                                                                               4;;4333[[/                                                                                                         ",
-"                                                                                               4%;|333[[[                                                                                                         ",
-"                                                                                               %%;_33<[[/                                                                                                         ",
-"                                                                                               %%)_333[[[                                                                                                         ",
-"                                                                                               %%)_333[[/                                                                                                         ",
-"                                                                                               ;;),33<[[[                                                                                                         ",
-"                                                                                               ;;)_333[[/                                                                                                         ",
-"                                                                                               ;;^,333[[[                                                                                                         ",
-"                                                                                               %))433<[[/                                                                                                         ",
-"                                                                                               4;)4333[[[                                                                                                         ",
-"                                                                                               4;;-333[[/                                                                                                         ",
-"                                                                                               %;)433<+[[                                                                                                         ",
-"                                                                                               %;)43332[/                                                                                                         ",
-"                                                                                               ;)^|33<([[                                                                                                         ",
-"                                                                                                ;)%3332[/                                                                                                         ",
-"                                                                                                ;^;3332[[                                                                                                         ",
-"                                                                                                ;;;333^[[                                                                                                         ",
-"                                                                                                4%)$33%[[                                                                                                         ",
-"                                                                                                ,4^33$%+[++                                                                                                       ",
-"                                                                                               $34^333,2++22                                                                                                      ",
-"                                                                                              13_%-33333)2222                                                                                                     ",
-"                                                                                             33_4_333333<;22++                                                                                                    ",
-"                                                                                             ,,4_3$33333$3%2+++                                                                                                   ",
-"                                                                                             %%433333333333%[[[                                                                                                   ",
-"                                                                                             ;)^333333333333+/[                                                                                                   ",
-"                                                                                             ))2$33333333333([[                                                                                                   ",
-"                                                                                             ;;^$33<33333333)[[                                                                                                   ",
-"                                                                                             ))^$33333333333%[/[                                                                                                  ",
-"                                                                                             ;)^,333333<3333-[[[                                                                                                  ",
-"                                                                                             ;;),333<3333333_+/[                                                                                                  ",
-"                                                                                             ;))_333333333333+[[                                                                                                  ",
-"                                                                                             ;))|33333333<3332[[                                                                                                  ",
-"                                                                                             %)^|333333333333;/[                                                                                                  ",
-"                                                                                             %%)4333333333333%[[[                                                                                                 ",
-"                                                                                             _4;|333333333333-[[[                                                                                                 ",
-"                                                                                              ,%;-|;%%%))%%%%4+[+                                                                                                 ",
-"                                                                                          1:1*<%(++++[++[+[+[+[2(%-,_,                                                                                            ",
-"                                                                                      :1111$$<|)2[+[+++))+++[++2^%|,,,,,,                                                                                         ",
-"                                                                                   ::::1$3<,||-,<3:}}}}}:}}}}:33,4-%44--,-,--                                                                                     ",
-"                                                                                 :::*$3_-,<1}}}}}}}}}}}}}}:}}:}:}}}}1_-%%4||4-4                                                                                   ",
-"                                                                              :::1$3_,_$}}}}}}}:1**$$33333333$$$*1::}}}}1,;;44|4|                                                                                 ",
-"                                                                            :::1*<,4),}}::1*333333333$3$3333$3333333$}}:},22);%%444%                                                                              ",
-"                                                                          ::::*<4,{;2+}}3333333333$<$<33333333<33333331}}2+[%=2);%%44                                                                             ",
-"                                                                         :::$<-<&>!#++,}*333333333$3$3333333<3$333333331_+[(>>#=2^;;%%%                                                                           ",
-"                                                                       :::*3-,{'>>>>2+;}:3333333333$<3333333$$<333333333;++=>'>&{=2^);;;%                                                                         ",
-"                                                                      ::13--{>>>>>>>=[+}}333333<3333$333<3333$3$3333333$2[+#>>>>>&#;(^);;;                                                                        ",
-"                                                                    ::1*<-~>>>>>>>>&#++$}$333333333333333333$<$<3333333<+++>'>>>>'>>#22^)));                                                                      ",
-"                                                                   ::13,='''>>&&@&>>#+[-}}333333333333333333$333333333$-+[)>>>>>>>>>>&=22))))                                                                     ",
-"                                                                 ::11<-~'>&&@@@@@>>>>++%:}33333333333333333333333<3333$4[+=>>>>>>>>>>>'#22^)))^                                                                   ",
-"                                                                }:1*,-&''&@@@@@@@>>'>)+(}}1$333333<333333333333333<3331^++#>>'>>>>>>>>>>{;+^^^^^                                                                  ",
-"                                                               :1*34~''&@@@@@@@@&>>>&=++}}}333333333<33333333333$33333}+++#>>>>>'>>>>>>>>'=+2^^^(                                                                 ",
-"                                                              ::1<-#'&@@@@@@@@@@>>>>>=[+3}}1333333333333<3333333333333}+++''>>>>>>'>>>>>>>'#2+2^2^                                                                ",
-"                                                             :1*_4{'&@@@@@@@@@@'>>>>>#+[3}}:3333<$3$%[[++[+23333$<3$313+[(>>>'>>>>>>>>>>>>'>{^22^22                                                               ",
-"                                                            ::3,=!'@@@@@@@@@@@&>>>>>>#++,}}}*33333(^2+[[[[[+((,33$3331<++)>>>>>'>>>>'>>'>>>>>&)22222                                                              ",
-"                                                           11$,,!>@@@@@@@@@@@&>>>>>>>&+[|}}}:33333[/..../././[-3333$3}|+[=>>>>>>>'>>>>>>>>>>>>&=+22222                                                            ",
-"                                                          :13--'>@@@@@@@@@@@@>>>>'>>>>++%}}:}33333+.///./././[-3<3333}|[+=>>>>>>>>>>>'>>>>>>>>>>=+2222+                                                           ",
-"                                                         :*3-,>&@@@@@@@@@@@&>>'>>>>>>>2+)}}}}13333^(2[[[[[[+(^_$$3$3$}%+[#>>>'>>>>'>>>>>>>>>>>>&&=+2+2++                                                          ",
-"                                                        1*3-~>@@@@@@@@@@@@@>>>>>>>>>>>)[)}}}}}3333++[+[+[++++[,33<$31}^+[#>>>>>>>>>>>>>'>>>>>>>>>&=+2+2+                                                          ",
-"                                                       113-->>@@@@@@@@@@@@>>>>>>>>>>>>)+2:}}:}1333+..........[-33$331})++#>>>>>'>>>>'>>>>>>>>>>>>&>=+++++                                                         ",
-"                                                      1*$-='@@@@@@@@@@@@@>>>>>>'>>>&>>=+[}}}}}:$33[//////////[,3<$331}2+[&>>'>>>>'>>>>>>>'>>>>>>>>>>=+2+++                                                        ",
-"                                                     11*_,'&@@@@@@@@@@@@>>>>'>>>>>>>>>=++}:}}}}*33%%^[////[2%%_3$3331:[++>>>>>>>>>>>>>'>>>>>>>>>>>>>&=++2++                                                       ",
-"                                                    :*3,=!>@@@@@@@@@@@@&>>>>>>>>'>>>>>=+[}}}}:}:33++[++++[+[++,333$3:}+++>>>>>'>>>>'>>>>>>>'>>>>>>>>>>)+++++                                                      ",
-"                                                   1**_-!&@@@@@@@@@@@@>>>>>>>'>>>>>>>>#++<}:}}}}*3+..........[-3$<33}:+[(>>'>>>>'>>>>>>>'>>>>>>>>>>>>>>^2++++                                                     ",
-"                                                  1**_4{>@@@@@@@@@@@@&>>>>'>>>>>>>>>>>#[+3}}}}}::3+//////////[,33$33}$++)>>>>>>>>>>>>'>>>>>>>>>>>>>>>>>&++2[++                                                    ",
-"                                                  1*<4{>@@@@@@@@@@@@&>>>>>>>>'>>'>>>>>#++3}:}}}}}$%%^[////[2%%<3$<33}3[[)>>>'>>>>>'>>>>>>'>>>>>>>>>>>>>>@2++[++                                                   ",
-"                                                 1*<-~&@@@@@@@@@@@@@>>>>'>>>>>>>>>'>>>#+[3}}}:}}}1^^2[[[[[[+^^,33333}3++)>>>>>'>>>>>>>>>>>>'>>'>>>>>>>>>!#+++[+                                                   ",
-"                                                1*3,-'@@@@@@@@@@@@>>>>>>>>>>>'>>>>>>>>][+_:}}}}:}}+../...../.[,333$$:3+[;>>>>>>>>>>'>>'>>>>>>>>>>>>>>>>>>>=+++++                                                  ",
-"                                               1*3,-&>@@@@@@@@@@@@>>>>'>>>'>>>>'>>>>>>'[+|}:}}}}}:+[///[/[///+,3333$}<++='>>'>>>'>>>>>>>'>>>>>>>'>>>>>>>>>>^+++[+                                                 ",
-"                                               **<4{>@@@@@@@@@@@&>>>>>>>>>>>>>>>>'>>>>>++|}}}}:}}}4%^[////[+;%<33331}<++=>>>>>>>>>>'>>>>>>'>>'>>>>>>>>>>>>>@++++[+                                                ",
-"                                              13<-~'@@@@@@@@@@@@>>>>'>>>'>>>>>>>>>>'>>>++4}:}}}}:}++++[+++++++-33333}4++='>>>>'>>>>>>'>>>>>>>>>>>>'>>>>>>>>>#++++[                                                ",
-"                                             **3-,'@@@@@@@@@@@&>>'>>>>>>>>'>>'>>>>>>'>][+|}}}:}}}:+..........[-33333}-[+=>>'>>&>>>>>>>>>>>>>>>'>>>>>>>>>>>>>>=+++++                                               ",
-"                                             **_=!>@@@@@@@@@@@>>>>>>>>>>>>>>>>>>>'>>>>'++4}}}}}}}}[//////////[,333$3}4++='>>>>>>'>>>>>'>>'>>'>>>>>>>'>>>'>>>>>^++[++                                              ",
-"                                            *3_%{>@@@@@@@@@@>'>>>>>'>>>>>>>>>>'>>>>>>>&^+|:}}}:}}}|4)[/////2%%<333$$}|++=>>>>>>>>>>'>>>>>>>>>>>'>>>>>>>>&>>>>>#++++[                                              ",
-"                                           **<,,'&@@@@@@@@@@>>>>'>>>>'>>>>'>>>>>>>>>>>>)+;}}:}}}:}+++++++++++[,3333$}4++#'>>'>>>>'>>>>>'>>>>>>>>>'>>>>>>&&>>>>>=+++[[                                             ",
-"                                           *3,4&>@@@@@@@@@&>>'>>>>>>>>>'>>>'>>>>>>>>>>>)+^}}}}}}}}+..........[-3333$}|++#>>>>>'>>>>>'>>>>'>>>>>>>>>>>>>>>>@>>>>>(+++++                                            ",
-"                                          *$_4#'@@@@@@@@@@>>>>>>>>>'>>>>>>>>>'>>>>>>>>>)+^}}}:}}}:+//////////[,3333*}4[+#'>>>>>>>>>>>>>>>>>'>>'>>>>'>>>>>>>&>>>>@[+[+[                                            ",
-"                                         **<-~>&@@@@@@@@>>>>>'>>'>>>>>>>>>>>>>'>>'>>>>>)+):}}}:}}}))2[[[[[[+^^-3333$}|++#>>>>>'>>>>>'>>>>>>>>>>>'>>>>>>>>>&&>>>!>=+++[+                                           ",
-"                                         $3_4&>@@@@@@@@@>>>>>>>>>>>>>>'>>'>>>>>>>>>>>>>)+)}}}}}}:}+[[[[[[[[[[[,33333}4++#'>>>>>>'>>>>>'>>'>>>>>>>>>>'>>>>>>>@>>>>>^[++[                                           ",
-"                                        *3<4~'@@@@@@@@&>>>>>>>>>'>>>>>>>>>>>>>>>>'>>>>>)+):}}:}}}:+..........[-3333$}|++#>'>>>>>>>>>>>>>>>>>'>>>>'>>>'>>>>>>&@>>>>#++[++                                          ",
-"                                       $3<,='>@@@@@@@@&>>>>>>>'>>>'>>>>'>>>'>>>'>>>'>>>)+)}}}}}}}}+[[[[[[[[[[[,33333};++#>>>'>>>>'>>>>>'>>>>>>'>>>>>>>>'>>>>>@@>>>>=+[[[+                                         ",
-"                                       $$_4{>@@@@@@@&>>>>>>'>>>>>>>>'>>>>>>>'>>>>>>>>>>)+):}}}:}}}44^[/////2%%,33333})[+#>>>>>'>>>>>'>>>>'>>>>>>>>>>>>>>>>>>>>@&>>>&+++[+                                         ",
-"                                      $3_-~!&@@@@@@@&>>>>'>>>>>>>>>>>>>>>'>>>>>>>>>>>>>)+)}:}}}:}:+[[[/[[[[[[+-3333<})++#'>>>>>>>>'>>>>>>>>'>>>>'>>'>>>>>>>>>>@@>>>>#[++[+                                        ",
-"                                      33,4!>@@@@@@@>>>>>>>>>>>'>>>>>>>'>>>>>>>>'>>>>>>>)+)}}:}}}}}+..........[-3333$})++#>>>>>>'>>>>'>>>>>>>>>>>>>>>>>>>>>>>>>>@@&>&&2+++[                                        ",
-"                                     $3_4~'&@@@@@@>>>>>>>>>>'>>>'>>'>>>>>>>>>'>>>'>>>>>)+)}}}}:}}}[[[[[[[[[[[[,3<333}^++#'>>'>>>>>>>>>'>>>>>'>>>>'>>>'>>'>>>>>>@@@>>>#+[+[+                                       ",
-"                                     33,-'>@@@@@@>>>>>>>>>>>>>>>>>>>>>>>>>'>>>>>>>>>>>>)+):}}}}}:}|4^[/////2%%<3$33$})[+#>>>>>>>>>>>>>>>>'>>>>'>>>>>>>>>>>>>>>>@@@@>>>)+[+[                                       ",
-"                                    $3_4#'&@@@@@>>>>>>'>>'>>>>>>>>>>>'>>'>>>>>>>>>>>>>>)+)}}:}}}}}+[[[[[[[[[[+,33333})++#'>>>>'>>'>>>>>'>>>>>>>>>>>'>>>>>>>>>>>>@@@&>>{[++[+                                      ",
-"                                    3_,=>>@@@@@>>>>>>>>>>>>>>>>'>>'>>>>>>>>>>>'>>>>>>>>)+^}}}:}}}}+..........[-33333})[+#>>>>>>>>>>>'>>>>>'>>>>>'>>>'>>>'>>>>>>>@@@@&>>=[++[[                                     ",
-"                                   $<_4{>&@@@@>>>'>>'>>>>>>>'>>>>>>>>>'>>>>'>>>>'>>>>>>)+^}}}}}:}:+[[[[[[[[[[[-333$1}4++#'>>'>>>>>>>>>>>>>>>'>>>>>>>>>'>>>'>>>>>@@@@@>>{[+[+[                                     ",
-"                                   3<-->>@@@@&>>>>>>>>'>>'>>>>>>>>'>>>>>'>>>>>>>>>>>>>>)+)}}}}}}}}44^[/////24|3333$:}4[+#>>>>'>>'>>>'>>>>>>>>'>>>>>>>>>>>>>>>>>>&@@@@&>>=++[[+                                    ",
-"                                  33,4&>&@@@@>>>>>>>>>>>>>>>>>>'>>>>'>>>>>>>>'>>>>'>>>>)[)}:}:}}}}+[[[[[[[[[[[31333}}|++#'>>>>>>>>'>>>'>>'>>>>>'>>>>'>>>>>>>>>>>>@@@@@&>&+++[[                                    ",
-"                                  3<-->>@@@&'>'>>'>>>>>>>'>>'>>>>>>>>>>>>>'>>>>'>>>>>>>++%}}}}}:}}+..........[<}::}}}4++#>>>>'>>>>>>>>>>>>>>>>>>>'>>>>>'>>>'>>>>>@@@@@@&>=+[+[+                                   ",
-"                                 3<_%&>&@@@>>>>>>>>'>>'>>>>>>>>>>>'>>>>>>>>>>>>>>>>>>>>++4}}}}}}}:++[+++[+[+++3}}}}}}4++#>>>>>>'>>>>>>>'>>>>>'>>>>>>>>>>>'>>>'>>>@@@@@@@'&+++[[                                   ",
-"                                 3<-,'>@@@>>>>'>>>>>>>>>>>>>'>>'>>>>>>'>>>>'>>>'>>>>>>>++|}:}}:}}}4|^[////[244*}}}}}}|+[=>>>>>>>>>>>'>>>>>'>>>>>>>>>>>>>>>>>>>>>>@@@@@@@&>=++[+[                                  ",
-"                                $<_4&>>@@>>>>>>>'>>>>>>>>'>>>>>>>>>>>>>>'>>>>>>>>'>>>>>++4}}}}}}:}+[///[////[[3:}:}}}4++='>>>>>>>'>>>>>>>>>>>>>'>>'>>>'>>>>>>>>>>&@@@@@@&>&++[[[                                  ",
-"                                3_-->>@@>>'>>>>>>>>'>>'>>>>>'>>>>>>'>>>>>>>'>>>>>>>>>>&++|:}}:}}}}+..........[3}}}}}:3++=>>'>>'>>>>>>>>'>>>>'>>>>>>'>>>>>'>>>>>>>@@@@@@@@&>=+++[                                  ",
-"                               <<_%&>'@&>>>>'>>>>'>>>>>>>>>>>>'>>'>>>'>>>>>>>'>>>>>>>>{[+4}}}}}:}}[++[+++[+++[3:}:}}}3++='>>>>>>>>>'>>>>>'>>>>>>'>>>>>>>>>>'>>>>>&@@@@@@@@>{[++[[                                 ",
-"                               3<,='>>@>>>>>>>'>>>>>>>>'>>>>>>>>>>>>>>>'>>>>>>'>>'>>>&~++$}}:}}}:}3<%[.././^<3:}}}}}:3[[=>>'>>>>'>>>'>>>>>>>>'>>>>>>>'>>>>>>>>>>>@@@@@@@@@&&=[++[                                 ",
-"                              <3,4{!>&&>>>>>>>>>>>>>'>>>>'>>>>>'>>>>>>>>>'>>>>>>>>>>>>#[+<}}}}}}}}+[[[[[[[[[[+_}}}}}}3+[)>>>>'>>>>>>>>'>>>>>>>>>>>>>>>>'>>>>'>>>>@@@@@@@@@@&{[+[[[                                ",
-"                              <_,|>>&&>>>'>>>>>>>'>>>>>>>>>>'>>>>>>'>>>>>>>>>>'>>>>>>>#++3}}:}}}}:+..........[3}:}}}:}++)>>>>>>>>>>>>>>>>'>>>>>>'>>>>>>>>'>>>>>>'@@@@@@@@@@@>;++[+                                ",
-"                             3<_4~>>&>>>>>>'>>'>>>>>>>'>>>>>>>>>>'>>>'>>>>>'>>>>'>>>>>=++3}}}}:}}}+[+[++[+[+++<}}}}}}}[+)>>>>>>'>>'>>>>>>>>'>>>>>>'>>>>>>>>>>>>>&@@@@@@@@@@@>#++[[[                               ",
-"                             <_-4'>&&>'>>>>>>>>>>>>'>>>>>'>>>>'>>>>>>>>>'>>>>>>>>>>>>'=[+}}:}}}}:}44)[/////2441}}:}}}}+[+>>>'>>>>>>'>>'>>>>>>>>>>>>>>'>>>>>'>>>>&@@@@@@@@@@@&>^++[+                               ",
-"                             <_4#>>&>>>>>'>>>>>>'>>>>>>'>>>'>>>>>>>>>>>>>>>>>>>>>'>>>>=+[}}}}}}}}}+////[////[[3}}}}:}}^[+>>>>>>>'>>>>>>>'>>>>'>>>>>'>>>'>>>>>>>>@@@@@@@@@@@@@>#[+[[+                              ",
-"                            <<,%#>&>>>'>>>'>>'>>>>>>'>>>>>>>>>>>'>>'>>>>>>>'>>'>>>>>>>;++}}:}:}}}}+..........[3:}}}}}})++>>>>'>>>>>'>>>>>>'>>>>>'>>>>>>>>>>'>>>&@@@@@@@@@@@@@>#[+[[[                              ",
-"                            <_-^=>>>>>>>>>>>>>>>>>>>>>>>>>>>>>'>>>>>>'>>'>>>>>>>>>>>>>)[^}}}}}}:}:++[++[+++[+[3:}}:}}})[+#>>>>>>>>>>>'>>>>>>>>'>>>>>>>>>>>>>>>>>@@@@@@@@@@@@@>#[++[[                              ",
-"                            __%2=>>>>>>>>>>>>'>>'>>>'>>>'>>'>>>>'>>>>>>>>>>>>>>>>'>>>>(+)}}}:}}}}}44)[////[244*}}}}:}}4++#'>>>>>>>>>>>>>>>>'>>>>'>>>'>>'>>>>>>>@@@@@@@@@@@@@@@=+[++[[                             ",
-"                           3_-;+(>>>>>>>>>>'>>>>>>'>>>'>>>>>>>>>>>'>>>>>>>'>>'>>>>>>>>++)}:}}}:}}}+//////////+<}}}}}}}4++='>>>>'>>>>>>'>>>>>>>>>>>'>>>>>>>>'>>>@@@@@@@@@@@@@@>(++[+[[                             ",
-"                           <,4;++#>>'>>>'>>>>'>>>>>>>>>>'>>>>>>>>>>>'>>'>>>>>>>>>'>>>{++4}}}}}}}}:+..........[3:}}}:}}<++=>'>>>>'>>'>>>'>>>>>>>>>>>>>>>>'>>>>>@@@@@@@@@@@@@@@{+++++[[+                            ",
-"                          <_,%$++=>>>>'>>>>>>>>'>>>>>>>>>>'>>>>>'>>>>>>>>>>'>>>'>>>>>#++|}}:}}}:}}+[+++[++++++3}}:}}}}3++=>>>>>>>>>>>>>>>'>>>'>>>>>>>'>>>>>>>&@@@@@@@@@@@@@@@=+[+2_+/[                            ",
-"                          <,4-})[[{>>>>>>>>>>>>>>>'>>>>>>>>>>'>>>>>>>>>>'>>>'>>>>>>>&#++<}}}:}}}}}44^[/////244$}}}}:}}$+[)>'>>>>'>>>>>>>>>'>>>'>>>>>>>>>>>>>&@@@@@@@@@@@@@@&&++++-}++[                            ",
-"                          _,%*}3+[)>>>>>>'>>>>>>>>>>'>>>>>>'>>>>>>>>'>>>>>>>>>>>>>>>>=[+3}}}}}}}}}+//////////[3}}}}}}}}+[(>>>'>>>>'>>'>>>>>>>>>>'>>'>>>'>>>>@@@@@@@@@@@@@@@&)+[+21};+[[                           ",
-"                         <_-4}}})+[#>>'>>>>'>>>>>>>>>'>>'>>>>>>>>'>>>>>>>>>>>>>'>>>>>;++1}}}}:}:}}+..........[3:}}}}:}}2++>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>@@@@@@@@@@@@@@@&#++++_}}3+[[                           ",
-"                         _,4_}}}*++[#>>>>>>>>'>>'>>>>>>>>>>>>>'>>>>>>>'>>'>>>'>>>'>>>;[+}}}:}}}}}:+++[++++++[+3}:}}}}}:)[+{>>>>>>>>'>>>'>>>'>>>>>'>>>'>>>>@@@@@@@@@@@@@@@&@+[+[%}}}}(+[                           ",
-"                        <<-%:}}}}<+++{>>>>>>>>>>>>>>>'>>>>>'>>>>>>>'>>>>>>'>>>>>>>>>>++^}:}}}}:}}}:}4/.....)}:}}}}}:}}}4+[#>>'>>'>>>>>>>'>>>>>'>>>>>>>>>>@@@@@@@@@@@@@@&>#++++^1}}:}-[[[                          ",
-"                        <_--}}}}}}-+[+#>>>>'>>>>>>'>>>>'>>>>>>>>>'>>>>>>>>>>>>>>>>>>&++%}}}}}}}}}}}}|++[+++)}}}:}}}}}:}-++=>>>>>>>>>>'>>>>>>>>>>>>>'>>>&@@@@@@@@@@@@@@@>{+++[^1}1$:}1[[[                          ",
-"                        _,%3:}}:}}}4+++='>>>'>>'>>>>>>>>>>>'>>'>>>>'>>>>>>>>>>'>>>>>#++4:}}:}}}:}}}}}:}}}:}}}}}}}}:}}}}3++=>>'>>>>'>>>>>'>>>>>>>'>>>>&&@@@@@@@@@@@@@@>>=++[+^:}1331}};[+[                         ",
-"                       <,-%}}}}}}}}:,+++)&>>>>>>>>>>>>>>'>>>>>>>>>>>>'>>>>'>>>>>'>>>=++_}}}}}:}}}:}}}}}}}}}:}}:}}}}}}}}$++)>>>>'>>>>>>>>>>'>>'>>>>>>&@@@@@@@@@@@@@@>>&;+[++;1}*3$33:},+[[                         ",
-"                       <,--}:}}:}}}}}3+[++=>>>>'>>>>>'>>>>>'>>>>>>>>>>>'>>>'>>>>>>''=++$}}:}}}}}}}}}}:}}:}}}}}}:}}:}:}}}+[+>>>>>>>>>>>>>>>>>>>>>>>>@@@@@@@@@@@@@@&>>=+++++4}:333333:}1[[[                         ",
-"                       ,,%1}}}}}}:}}}}:;+++(#&>>>>>'>>>>>>>>>'>>>>>'>>>>>>>>>'>>>>>>^++}:}}}:}}:}:}:}}}}}}:}}}}}}}}}}}:})++{>>>>>'>>'>>>>>>'>>>>&@@@@@@@@@@@@@@&&>#(++[+2<}1$33333$*}};[[[                        ",
-"                      <,-%}}:}}}}}}}}}}},2[+[2#&'>>>>>'>>>>>>>>>'>>>>>>>>>>>>>>>>>>&++(}}}}}}}}}}}}}}}}:}}}}:}}:}}}:}}}}4+[#>>'>>>>>>'>>'>>>>>>@@@@@@@@@@@@@&>>&#(+++++|}}$33333333$}}_+[+                        ",
-"                      _,4,}}}}:}:}}:}:}}}142[+[+={>>>>>>'>>>>>'>>>>>>'>>'>>>>>'>>>>{+[%}}:}}}:}}}}}}}:}}}:}}}}}}}:}}}}:},+[='>>>>>'>>>>>>>>>&@@@@@@@@@@@@&>>>{=([[[++%*}1$3333333333:}:+[[                        ",
-"                      ,,%$}}}}}}}}}}}}:}}}}1-+++[[)={>>>>>>'>>>>>>'>>>>>>>>'>>>>>>&#++-}}}:}}}}}:}:}}}}}}}}}}}:}}}}:}}}}$++)>>>'>>>>>>>>>>@@@@@@@@@&@>>>>>{#)[[++++;*}:3333333333333*}}%[[[                       ",
-"                     <_-%}}:}}}}}:}}}}}}}}}}}:_2++[++^={>>>>>>>>>>>>>>'>>>>>>>>'>>>=[+*:}}}}:}}}}}}}}}}:}}:}}}}}}}}}}:}}}2[+'>>>>>>>>>&@@@@@@@@>&>>&>>>{=;[[[+++2|:}:$3333333333<3333:}_[+[                       ",
-"                     _,4,}}}:}:}}}}:}}}}}}}}}}}}$%+++++[+;#{>>>>>>>'>>>'>>>>'>>>>>&^[2}}}}}}}}}:}}:}:}}}}}}}}:}}:}}}}}}:})+[{>>>>>&&@&@@&@&>'>>>>>>@#;2++[++++;_}}:$3$33333<3333$333$:}:+[[                       ",
-"                     ,,%*}}}}}}}}}}}}:}:}}:}:}:}}}}<%+++[[[[+)=#{>>>>>>>>>'>>>>>>>@++%}}:}}:}}}}}}}}}}:}}:}}}}}}}}:}}}}}}-+[=>>>&&&&>>>>>>>>>>&#=;+[[+[++++%,:}}*$333333333333333333$*}})[[[                      ",
-"                    <,-%}}}}}}}:}}:}}}}}}}}}}}}}}}}}}}*|)++++++[[+)==#@'>>>>>>>>>&~++_}}}:}}:}}:}}}:}}}}}}}}:}}:}}}}:}}}}$++^>>>&>&>>>>&&#==)++[+[++[+[^%3:}}}1333333333333333333333$3}},+[[                      ",
-"                    _,4,}}}:}:}}}}}}:}}}:}}}}}}:}}}}:}}}}}$4;++++[++++++()==###&>>([+}}}}}}:}:}}}:}}}:}}:}}}}}}:}}:}}}:}:}([+{&!###==;^[+++++[+++++)|<:}}}}**3$333333333<333<333333333:}*[[[                      ",
-"                    ,-%3}}}}}}}}}:}}}:}}}}:}:}}}}:}}}}}}}}:}}}1<|)^[+++[+[[+[+++[++++;4444_$$_$_3*}:}}}}}:}}:}}13_$3<3_|4|^++[++++[[[[[+[+[+[2)|,3}}}}}}:*33$3333333333333333333333333*}})[[                      ",
-"                   _,-%}}:}}}}:}}}}}}}}}}}}}}}}}}}}:}}}}:}}}}}}}}}}}$34%)^[++[++++++++++++++++++[+++++[+++[+++[+++++++++++[+[++[++++++2))|_3:}}}}}}}:1$33$3333333333<333333333333333333}}-+[[                     ",
-"                   ,,4-}}}}:}}}}}:}}}:}:}}}:}:}}:}}}}:}}}}}}:}}}}}}:}}}}}}:}33<44;)^^+[+[+[+[+[+++[+[+++[+++[+++[++[+[++[+++(^^%|433$}}}}}}:}:}}}:1$$3$33$3333$<33333333333333333<33333:}$+[[                     ",
-"                   _,%3}}}}}}}}:}}}:}}}}}:}}}}}}}}:}}}}}}}:}}}}}}}}}11:}}}}}:}}}}}}}}}}}}:333<33<,444444444|444|_33<33<1:}}}}}}}}}}}}:}}}}}}::13333333333333333333333333333<333333333331}}2[[                     ",
-"                   --;::}}:}:}}}}}}}}}:}}}}}:}}:}}}}}:}:}}}}}:}}:}}}}}1$$$$*::}}:}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}:}:}}}:::3$$3333$33333333333333333333333333333333333333}}%+[[                    ",
-"                  <,4-}}}}}}}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}}1*$33<$$*$1*:::}}:}}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}}}}:}:}:113*333333333333333333333333333333333333333<3333333333:}<[[[                    ",
-"                  ,-4_}}}:}}:}:}}}}:}}}}:}}:}}:}}}:}}}}:}:}}:}}:}}}:}}:}}}}1$$3$33333333$$$3*1**1111:1}:}}}:}:}}}}:1:1:*11**$*333$333$333333333333333333333<3333333333<3333333333<333333:}}+[[                    ",
-"                  ,-%:}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}:*3333333333$333333$$$_333333$3$$<$33333333333$33333333333333333333333333<333333333<333<33333333333333333333}};[[                    ",
-"                 ,,4%}}}:}}:}}}:}}:}}}}}:}}:}}}:}}}}}}:}}:}}:}}:}}}}:}}}}}}:}}}:*$333333$3333333$$$$33333$<3$$$<33333333333333333333333333333333333<333333333333333$33333333333333<333333}}-[[[                   ",
-"                 ,,4,}:}}}}}}:}}}}}}:}}}}}}}}:}}}:}}}}}}}}}}}}}}}:}}}}}}}:}}}:}}}}1$33333<$33333_$$$33333333$333333333333333333333333333333333333333333333333333<3333333333333333333333331}*+[[                   ",
-"                 ,-%3}}}}}:}}}}}}:}}}}}:}}:}}}}}}}:}}:}}:}}:}}:}}}}:}}:}}}}}}}}}}:}}1*333$333333$$_333$<33$<3$<33333333333333333333<333333<333<33333333333<33333333333333<333333333333333*}}+[[                   ",
-"                 --;}}}}:}}}:}}:}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}:}*3333333333333333$$3$33$33333333<33<3333333333<$<333333333333333<3333<333333<333<$3333333333<333333:}%[[[                  ",
-"                ,,44}}}}}}}}}}}}}}}}:}}:}}:}}}}:}}:}}:}}:}}:}}:}:}}:}}}}:}}}:}}}}:}}}}:}}*33333333333333<3$<333<333333333333<3333333333$3333333<333333333333333333333333333<33333333333333}}_[[[                  ",
-"                ,-4_}:}}}}:}}:}}}:}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}::$33333333333$$3$3333333<3333333$33333333333333333333333333333333333<333333333333333333333333331}:+[[                  ",
-"                ,-%$}}}:}}}}}}:}}}}}}}:}}:}}}}}}}:}}:}}:}}:}}:}}}}:}}}}}:}}}}:}}}}}}}}}:}}}}}1*33333333333333333333333333333333333333$<3333333333<33333333333333333333333333<33333<3333333*}}2[[                  ",
-"               _,4;}}}}}}:}}}}}}}}:}}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}:}}}}}:}}}:}:}}}}:}}}}}}}}}:$333333333333333333333333333<3333<$33$33333333333333333333333333333333333333333333333333333}}%[[[                 ",
-"               ,-44}}}:}}}:}}}}:}}}}}:}}:}}}}}}}:}}:}}:}}:}}:}}}}:}}}}}:}}}}}}}}}}:}}}}}}:}:}:}}}:*3333333333333<3333333333333333$<33<333333<33333333<33333333333333333<3333333333333333333*},[[[                 ",
-"               ,-4_}}}}}}}}}:}}}}:}}}}}}}}:}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}:}}:}}:}}}}}}}:}}}}}}}:}}}}*333333<3333333333333333333333333$3333333333333<$333333<3333333<333333333<333333333333$1}1+[[                 ",
-"               --%*:}}:}}}}}}}:}}}}}:}:}}}}:}:}}:}}}}}}}:}}:}:}}:}}}}}:}}}}}}}}}}}:}:}}}}}}}:}}}}:}}}:*3<3333333333333<333333333333333$<3333333333333333333333333333333333333333333<33333333}}2[[                 ",
-"               ,4%}}}}}}:}:}}}}}:}}}}}}:}}}}}}}}}}:}}}:}}}}}}}}}}}:}}}}}:}}:}}:}}}}}}}}}:}}}}}}}}}}}}}}}*33333333333<$3333333<3333333333333333<333333333333333333333333333333333333333333333:}%[[                 ",
-"              _-4|}}}:}}}}}}}:}}}:}}}}}}}}}}:}}:}}}:}}}}:}}}:}}:}}}}}:}}}}}}}}}:}}}:}:}}}}}:}}:}}}:}}:}}}:*3<33333333333<33333333<333333$<333333333333333333<33<3333333333333<333333<3333333:}_+[[                ",
-"              ,|4_}}}}}:}}}:}}}}}}}:}:}}:}}}}}}}}}}}}}}}}}:}}}}}}:}}}}}:}}:}}}}}}:}}}}}:}}}}}}}}:}}}}}}:}}}}*333<3333333333333333333333333333333333333<3333333333333333333333333333333333333*}3[[[                ",
-"              --%3}}:}}}:}}}}}:}}}}}}}}}}:}}:}}}:}}}:}}}}}}}}}:}}}}}:}}}}}}:}}}}}}}}:}}}}}:}}:}}}}}}:}}}}}}}}:*33333333333333333333333333<333333333~333333333333333<333<333333333333333333333}}+[[                ",
-"              -4;}}}}}}}}}}}}}}}:}:}}}:}}}}}}}:}}}:}}}:}:}}}:}}}:}}}}}:}}}}}}:}:}}}}}}:}}}}}}}}:}}:}}}}}:}}}}}}}*333333333333333333333333333~33333333333~3333333<33333333333333<33333<3333333:}%[[                ",
-"             ,-44}}:}:}}:}:}}:}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}}}}:}}}}:}}}}}}}}:}}}}}}}:}}:}}}}}}}:}:}}}}:}}:}}:$33<333<33333333333<3333333333<33333333333333333333333333333333333333333333:}|[[[               ",
-"             --4,}}}}}}}}}}}}}}:}}}:}}}}:}}}}:}}:}}}:}}}}}}}}}:}}:}}}:}}}}:}:}}}}}}:}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}:*$333333333<3333333333333333333333333<3333333333333<333333333333333333333*}3[[[               ",
-"             ,4%3}}}}:}}}:}}:}}}:}}}}:}}}}}}}}}}}:}}}:}}}:}:}}}}}}}}}}}}}}}}}}:}}}}}}}}}:}}:}}}}}:}}}}:}}:}}:}}:}}}}}*3333<333333<33333333333333333<33333333333333<333333<3333333333333333333$}:+[[               ",
-"             -4;:}}:}}}:}}}}}}}}}}:}}}}:}}:}:}}}}}}}}}}:}}}}}:}}}}:}}}:}}:}}}}}}:}:}}}:}}}}}}:}}}}}:}}}}}}}}}}}}}:}}}}}$$333333333333333333<33333333333333333333333333333333333<33333333<33333}}^[[               ",
-"            ,-4%}}}}}}}}}:}}:}}}}}}}:}}}}}}}}:}}}:}}}:}}}}:}}}}:}}}:}}}}}}}:}}}}}}}:}}}}}}:}}}}}:}}}}:}}:}}:}:}}}:}}}}}}}*3333333333333333333<3333333333333<33333333333333333333333<3333333333:}%[[               ",
-"            ,|4-}}}}}:}}}}}}}}:}:}}}}}:}}:}}}}}:}}}:}}}}}}}}:}}}}}}}}:}}}}}}}:}:}}}}}}}}:}}}:}}}}}:}}}}}}}}}}}}}}}}}:}}}}}:$$333333333<33333333333333333333333333333333333<3333333333333333333*}-[[[              ",
-"            --4_}}:}}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}:}}:}}}}}:}}:}}}}:}}:}}}}}}}}:}:}}}}}}}}}:}}}:}}}:}}:}}:}}}:}}}}:}}}}}*33333333333333333333333333333333333333333333333333333333333333333*}*+/[              ",
-"            -4%3}}}}:}}:}}}}}:}}}:}}}:}}:}}:}}}}:}}}:}}}}}}:}}}}}}}}:}}}}}}}:}}}:}}}}}}:}}:}}:}}}}}}}}}}}}}}}}}:}}}}:}}}}:}}}}$$33<333333<333333333<333<33333<3333333<3333333333333<33333333333:}+[[              ",
-"            -4%}}:}}}}}}}}:}}}:}}}}}}}}}}}}}}:}}}:}}}}}}:}}}}}:}}:}}}}:}}:}}}:}}}}}}:}}}}}}}}}}:}}}:}:}}}:}:}}}}}}}}}:}}}}}}}}}1$333333333333333<3333333333333333<3333333333<3333333333<3333333:}^[[              ",
-"           -|44}}}}:}}:}}}}}}}}}}}}:}}:}}:}}}}}}}}}}}}:}}}:}}}}}}}}}}}}}}}}}}}}}}:}}}}:}}:}}}}}}}:}}}}}:}}}}}}}}:}}}}}}}:}}:}}}}::$33333333333333333333333~33333333333333<333333333333333333333*}4[[              ",
-"           ,44|}}}}}}}}:}}:}}}:}:}}}}}}}}}}}:}:}}:}:}}}}}}}}}:}}:}}:}}:}}:}}}}:}}}}}}}}}}}}}:}}}}}}}}}}}}}}:}:}}}:}}:}}}}}}}}:}}}}:$~3333333<333333$<3333333~3333333333333333333333333333333333*}_[[[             ",
-"           -4%_}:}}}:}}}}}}}:}}}}}:}}:}}:}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}:}}}}:}}:}}}:}}:}}}:}:}}}:}}}:}}}}}}}}}}}}}:}}:}}:}}}}}}}:$33333333333333333<3333333<3333333333333<333333333<33333333}3[[[             ",
-"           --;$}}:}}}}}}}:}}}}}:}}}}}}}}}:}}}}}}:}}:}:}}}}}}}}}:}}:}}:}}:}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}}}:}}:}}}}}}}}}}}}}:}}}}}*333333333<333333333333333333333333333333<3333333333<33333:}[[[             ",
-"           |4;}}}}}}}:}}}}}}}}}}}:}}:}}}}}}:}:}}}}}}}}}:}}}}}:}}}}}}}}}}}}:}}}}:}}}}}}:}}}}:}}}:}:}}:}:}}}:}:}}}}}}}}:}}}:}}}:}}}}:}}}:}$3333333333333333333333333~33<333333333333333333333333331}^[[             ",
-"          ,-44}}}::}}}}}:}}:}:}}}}}}}}:}}}}}}}}}:}}}:}}}:}:}}}}}}:}}:}}:}}}}}}}}:}}:}}}}:}}}:}}}}}}}}}}}}}}}:}}:}}:}}}:}}}:}}}:}}}:}}}}}}$3~333333333333333333333333333<333333333<33333333333333::;[[             ",
-"          -4%-}}:}}}:}}}}}}}}}}:}}:}}}}}:}:}}}:}}}:}}}}}}}}}}}}:}}}}}}}}}:}}:}}}}}}}}:}}}}}}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}:}}:*333333~33333<33<333333333333333333333333333<33333333$}-[[[            ",
-"          --%,}}1:}}}}}:}}:}}}}}}}}:}}}}}}}:}}}}}}}}}:}}}}:}:}}}}}}:}}:}}}}}}:}}}}:}}}}}:}}:}}}}}:}:}}:}}}}}}:}}:}}:}}}:}}:}}:}}:}}}}}}}}}}}$33333333333333333<3333333333333<333333<33$333333333$}<+/[            ",
-"          |4%3}:1}}:}}}}}}}}:}:}}}}}}:}:}}}}}}}}:}}}}}}:}}}}}}:}}:}}}}}}:}}}}}}:}}}}}}:}}}}}}:}}}}}}}}}}}:}}:}}}}}}}}:}}}}}}}}}}}}:}}}}}:}}}}:$333333333333333333<33333333333333333333333333<3333}1+[[            ",
-"          -4%1}}*}}}}}:}}:}}}}}:}}}}}}}}}}}:}:}}}:}}:}}}}}}:}}}}}}}}}:}}}}:}}}}}}:}:}}}}}}:}}}:}}}}:}}:}}}}}}}}}}:}}}}}:}}}:}}:}}}}}:}}}}}}:}}}*<33333333333333333333333333333333333333<33333333$1:+/[            ",
-"          |4;}}11}:}}}}}}}}:}}}}}:}:}}}}:}}}}}}}}}}}}}:}}:}}}:}}}}}:}}}}}}}}:}}}}}}}}}}}:}}}}}}}:}}}}}}}:}}}:}}:}}}}}:}}}}:}}}}}:}}}}}}:}:}}}}}}:$333333333333333333<33<3333333<$33333333333333331}^[[            ",
-"         -444}}11}}}}:}}:}}}}}}}}}}}}:}}}}}}}:}}}}}:}}}}}}}}}}:}:}}}}}:}}:}}}}:}}}}:}:}}}}:}:}}}}:}}}:}}}:}}}}}}}:}}}}:}}}}}:}}}}}:}:}}}}}}}}:}}}}$333333333333333333333333333333<333333333333333$}%/[            ",
-"         ,44-}}$:}}:}}}}}}:}}:}}:}}}}}}:}}:}}}}:}:}}}:}}}}}:}}}}}}:}}}}}}}}:}}}}:}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}}:}}}}}:}}}}}}}:}}}:}}}}:}}}133333<33333333333333333333333333333333<3333333}-[[[           ",
-"         |4%_}}3}}}}}}}:}}}}}}}}}:}}:}}}}}}}}}}}}}}}}}:}:}}}}}}:}}}}}:}}:}}}}:}}}}:}}}:}}}}}:}:}}}}}}}:}}:}}}:}}:}}:}}}}}}:}}}}}:}}}}}}}}}}:}}}}:}}}:$333333333333333333<333<333333333333333333333}<[[[           ",
-"         -4%$}:3}:}}}:}}}:}}:}}}}}}}}}:}}:}}:}:}}}:}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}:}}}:}}}}}}:}}}:}}}}}}}}}}}}}}}}}:}}}}}}:}}}}}:}}}:}:}}}}:}}}}:}}}$$3333<33333~33333333333333<3333333333<33333::[[[           ",
-"         44;1}:3}}:}}}}}}}}}}}:}}}}:}}}}}}}}}}}}}}}:}}}}}:}:}}:}}}:}}:}}}:}}:}:}}:}}}}}}}}:}}}}}:}}}:}}:}}}:}}:}}:}}}:}}:}}}}}}}}}}:}}}}}:}}}}}}}}}}}}}:3333333333333333333333333333<33333333333331}+/[           ",
-"         44;}}**}}}}}}}:}}:}}}}}:}}}}:}}:}}:}}}:}}}}}:}:}}}}}}}}}}}}}}}:}}}}}}}}}}}:}}:}}}}}}:}}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}:}:}}}}}:}}}}}}:}}:}}:}}:}}:*33~33333333~3333333333333333333333333333*}^[[           ",
-"        ,444}}31}}:}:}}}}}}}}:}}}}:}}}}}}}}}:}}}}}}}}}}}}}}:}}:}}}}}:}}}}:}}}:}}:}}}}}}}:}}:}}}}}}:}}}:}}}}:}}:}}:}}:}}:}}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}}}}$3333333<33333333333333333333<3333333333*})[/           ",
-"        -444}}31}}}}}}:}}:}}}}}:}}}}:}}:}}}}}}:}}:}:}}}}:}}}}}}}:}:}}}}}}}}:}}}}}}:}}:}}}}}}}}:}:}}}:}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}:}}:}}}}:}}}:}}:}}}}}}}}:33<333333333~33333333<33333333333333333}4[[           ",
-"        |4%,}:31}}}:}}}}}}}}:}}}}}}}}}}}:}}}}}}}}}}}}:}}}}}}}:}}}}}}}:}}:}}}}}}:}}}}}}}}:}}}}}}}}}}}}}:}}:}}:}}:}}:}}:}}}}}:}:}}:}}}}}}:}}}}:}}}}}}:}:}:}}}:}$333333<33333<33333333333333333<333333}_[[[          ",
-"        |4%<}13:}:}}}:}}:}}}}}:}}:}}}:}}}}:}:}}:}}}}}}}:}}:}}}}:}}}:}}}}}}}}}:}}}:}}:}}}}}:}}:}}}:}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}:}}}}}:}}}}}}}}}}}}}}$33333333333333<$3333333333<333333333:<[[[          ",
-"        44%3}$3}}}}}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}:}}:}}}}}}}:}}}}}}}}:}}:}:}}}}}}}}}}}:}}}}}}}:}}}:}}}:}}:}}:}}:}}:}}:}}}}}}}:}}:}}}}:}}}}}}}}}}}}}}}}}:}}:}}}}*333333333333333333333333333333<3333:1[/[          ",
-"        44):}33:}}}:}}:}}:}}}:}}}}}}}}}:}}}:}}}}}}}}}}:}}}}}}}:}}:}}}}}}}}}}}}}:}}:}}}}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}}:}}}:}}:}}:}}:}:}:}}}}}}}:}}}133333<33333333333<3333333333333333*}[[[          ",
-"        44;}}33}}}}}}}}}}}}}}}}:}}:}:}}}:}}}}:}}:}}:}}}}:}}:}}}}}}}}}}}:}}:}:}}}}}}}}:}}}}}}}}}}:}}}}}:}}:}}:}}:}}:}}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}:333333333333333333333333333333333*}^[/          ",
-"        4%4}:3$}}:}}:}}:}}}:}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}}:}}:}}:}:}}}}}}}}}:}}:}}}}}}:}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}:}}:}:}}:}}:}}}}:}}:}}}}}:}}:}}}$333333~33<333333<3333333333<333$}^[[          ",
-"       |444}:3$}}}:}}}}}:}}}}}:}}:}}:}}:}}}}:}}:}}:}}}}}:}}}}}}}}}}}}}}:}}}:}}}}}}}:}:}}}}}:}}:}}:}}}}:}}}:}}:}}}:}}:}}}}}}}}:}}:}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}$3333333333333333333<3333333333$}4[[          ",
-"       |4%,}13*}}}}}:}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}:}}:}}:}}}}:}}}:}}}:}}}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}}:}}}}}}}:}}:}}}}:}}}:}}}:}}}:}}}}}}:}}:}}}}}:}}}:}}}}}*333333333333333333333333333333}4[[          ",
-"       |4%,}$3$:}}}}}}}}}}}}}:}}:}}:}}:}:}}:}}:}}:}:}}}}}}}}}}}}}}:}}}}}}}}}}}}:}}:}}}}:}}}}}}:}}:}}:}}}}}}:}}}}}:}}:}}}}}}:}}}}}}}}:}}}}}}}:}}:}}}}}}}:}}}}:}}}}}:}}}*33333333333<3333$<33333333333}</[[         ",
-"       44;$}331}}:}:}}:}:}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}:}}:}}}}}}}}:}}}:}}}}}}}}:}}}}}:}}}}}}}}}}}}:}}}}}}:}}}}}}}}:}}}}}}}:}}}}}}:}}:}}}}}}}:}}}}}}}:}}}}:}}}}}:}}:3333<33333333333333333333333:_[[[         ",
-"       44;$}331}}}}}}}}}}}}}}:}}:}}:}}}:}}:}}:}}:}}:}:}}}}}}}}}:}}:}:}}}:}}}}}:}}:}}}:}}}}}:}}:}}}}:}}}}:}}:}}}}:}}:}}}}}:}}:}}}}:}:}}}}}}}}}}:}}}}:}}:}}}}}}}}}}:}}}}}::3333333333333333<3333333333::[[[         ",
-"       4%;}:331}}}}}:}}}}:}}}}}}}}}}}:}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}:}}}}}}}}}}}}:}}}}:}}}:}}}}:}}}}}}}}}}}}}}}}}:}}}}}}}:}}}}}}:}}}:}}}}}}:}}}}}}:}}:}}:}}}}:}}}}}:$33<3333333333333333<333331:[[[         ",
-"       44)}:33*:}:}}}}:}}}}}}}}:}}:}}}}:}}:}}:}}:}}}:}}}}}}:}}}}}:}}}:}}}}}:}}:}}:}}}}}}:}}}}}}}}:}}}}}}:}}:}}:}}:}}:}}}}}}:}}}}}}}:}}}:}}}:}}:}}}}}:}}}}}}}}}}}}}}}}}:}}}}$333333<333333333333333331:2[/         ",
-"       4%4}1331}}}}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}}:}:}}}:}}}:}}}}}}}}}}:}:}}}}}}:}:}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}:}}}:}}}}}}}}}}}}}}}:}}}}:}}:}}:}}:}}:}}}}}:}}}33333333333333<333333333*}([[         ",
-"      |4%4}*331}:}}}}}}}}}}}}}:}}:}}:}}}}:}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}:}}}}}}}}:}}}}}}}:}}}}}}}:}}}:}}:}}:}}:}}}}}}}}:}}}}}:}}}:}}:}}:}}}}}}}}}}}}}}}}}}}}}}:}}}}:}}$3333333333333333<33333$}^[[         ",
-"      |4%-}*331}}}:}}:}:}}:}}}}}}}}}}}:}}}}}}}}}}}}:}}}}}:}:}}}}:}}}:}:}}:}:}}}}}}}}}:}}}}}}:}}}}}}:}}}}}}:}}}}}}}}}}}}:}:}}}}}}}:}}}}:}}}}}}}}}:}}:}}:}}:}}:}}:}}:}}}}}:}}}:}$3333<$<33333<333333333}%[[         ",
-"      |%%,}*331}}}}}}}}}}}}}}:}}:}}:}}}}:}}:}}:}:}}}}}}}}}}}}:}}}:}}}}}}}}}}}}}:}:}:}}}}}:}}}:}}:}}}:}}}}}}}:}}:}}:}}}}}}}}:}}}}}}:}}}}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}$333$3333333$333333333}4[/         ",
-"      |%%,}$33*}:}}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}:}}:}:}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}}}:}:}}}}}}:}}}}}}}}:}}:}}:}}:}}:}}:}}:}}}}}}:}}}}}}}$$$333333<$3333<33333},[/[        ",
-"      44;$:3331}}}}}}:}}}}}}}:}}:}}:}:}}:}}:}}}:}}}}}}}}:}:}}:}}:}:}:}}}}:}:}:}}}}}}}}}:}}:}}:}}}}:}}}}:}}:}}:}}:}}}}}:}:}:}}}}}}}}:}}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}}:}}}}:}:}:}}}$3333333333333333333}<[[[        ",
-"      4;;$}3331}}:}}}}}:}}}}}}}}}}}}}}}}}:}}}:}}}:}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}:}}:}}}}}}}:}}:}}}}}:}}}}}}}}}}}}:}}}}}}}}}}}}:}:}}}}:}}}}}}}:}}:}}:}}:}}:}}:}}:}}}}}:}}}}}}}}:}}$$33333333333333333:<[[[        ",
-"      44)*1333*}}}}}:}}}}:}}}}}:}}:}}:}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}:}:}}}}:}}}}}}}}}:}}}:}}}}}}}:}}}}}}:}}:}}:}}}}:}}}:}}}}:}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}*<3333<33333333333:1[/[        ",
-"      4%;}:333*}:}}}}}:}}}}:}:}}}}}}}}}:}}:}}}}:}}:}}:}}:}}}}}}:}:}}}}}}:}}}:}}}}:}}}}}:}}}}}:}}}}}}:}}}}}}}}}}}:}}}}:}}}:}}}}}:}}}}}:}}:}}}}:}}:}}:}}:}}:}}:}}:}}}}}:}}:}:}}}}}}:}}$33333333333<3333::+[/        ",
-"      %%)}:3331}}}}:}}}}}}}}}}}}}:}}:}}}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}:}}}}}}}}}}}:}}}}:}}}}}:}:}}:}}:}}}}}}}}}}}}}}:}}}}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}}}$$33333333333333:}[[[        ",
-"      4%;}1333*}}:}}}:}}:}}}}}:}}}}}}}:}}:}}}}:}}:}}:}}:}}:}}}:}}}:}}}}:}}:}}}}}:}:}:}}:}}}}}}}}}:}}}}}}}}}}}}}}:}}:}}}:}}:}}}}}}}}:}}:}}}}}:}}:}}}:}}:}}:}}:}}:}}}}:}}:}}}}}}}}:}}}}}*$$<$<3<3333333:}+[[        ",
-"      %%4}*3331}}}}}}}}}}:}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}}}}}}:}:}}}}:}}}}:}}:}}:}}}}}}:}}}}}}}}:}:}}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}:}}:}}}:}}:}}}$$$3$$$33333331}^[/        ",
-"      %%4}1333*}}}:}}}:}}}}}}:}}:}}}}:}}:}}:}:}}:}}:}}:}}}}:}}}}}:}}:}}}}}}:}:}}}}}}:}:}:}}}}}}:}}}}:}}}}}}}}}}}}:}}}}}:}}}:}}}}}:}}:}}:}}}}:}}}}}}:}}:}}:}}:}}:}}:}}}}:}}}}}}}}}}}}}}:}$333333<33333*:^[[        ",
-"     |4%4}*3333:}}}:}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}:}}:}}}}}}:}:}}}}}}}:}}}}}}}}}}:}}}:}}:}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}}}:}}}}}:}}:}}:}}:}}}:}:3333333333331}^[/        ",
-"     4%%-}$333*}}}}}}}}}}}}}:}}}}}}}:}}:}}:}}}:}}:}}:}}}}}:}}:}:}}:}}}}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}}:}}}}}}}}}}:}:}:}:}:}}:}:}}:}}}:}}:}}}}}}}}}}:}}:}}:}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}}}3333<$33333*}4[[        ",
-"     |%%,}$333*:}}:}:}:}}:}}}}:}}:}}}}}}}}}:}}}}}}}}}}}:}}}}}}}}}}}}}:}}:}:}:}}:}}}:}:}}:}}}:}}}}:}}}}}}}}:}}:}}}}}}}}}}}}}}}}}}}}:}}}}}}}:}}:}}:}}}}}}}}}}}}}}}}}:}:}}}}}}}}:}:}}:}}}}}:}:333$<3333$*:4[/        ",
-"     4%;,}$333$}}}}}}}}}}}}:}}}}}}}:}}:}}}}}}:}}:}}:}}}}}:}}:}}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}:}}:}}}}}}}}:}}}}}}}}}}}:}}:}}}}}}:}}}}}}}}}}}}:}}:}}:}}:}}:}}}}}}}}}:}:}}}}}}}}}:}:}}}::$$33333331}4[/        ",
-"     |%%,}$3333:}}}}}:}}:}}}}}}}:}}}}}}:}}}}}}}}}}}}}}:}}}}}}:}}}}:}}}:}}}}}}:}}}}}}:}}}:}}:}}}}}}}}}}}}:}}:}}}}}:}}:}:}:}}}}}}}}}:}}}}}:}}:}}:}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}:}}}}}}}}}}}:333333331:4[[        ",
-"     4;;<}$3333}}:}:}}}}}}:}}:}}}}:}}}}}}:}:}}:}}:}}:}}}:}}}}}}}}}}}:}}}:}:}}}}:}}:}}}}}}}}}}}:}}:}}:}}}}}}}}}:}}}}}}}}}}}:}}:}}:}}}}:}}}}}}}}}}:}}:}}:}}:}}:}}:}}}:}:}:}}}}}}:}}}}:}}:}}}}}}*$333333:}-[/        ",
-"     4%;$}$3333:}}}}}}}:}}}}}}}:}}}:}}}}}}}}}}}}}}}}}}}}}}:}}}:}}:}}}}}}}}}}}}}}}}}}:}}:}}:}}}}}}}}}:}}:}}:}}}}}:}}:}}}:}}}}}}}}}}:}}}:}}}:}}:}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}}}:}}}}*$<3333*}_[[[       ",
-"     %%)3}33333:}}}}}:}}}:}}}}}}}}}}}:}:}}:}}:}}:}}}}:}}}}}}:}}}}}}:}}:}}}:}:}}}:}}}}}}}}}}}:}}:}}}}}}}}}}}}:}}}}}}}}}}}}:}:}}:}}}}}}}}}:}}}}}}:}}:}}:}}:}}:}}}}}}:}}}}}}}}:}}:}}:}}:}}:}}:}}}}133333:}<[[[       ",
-"     4;;$:333331:}:}}}}}}}:}:}}:}}}}}}}}}}}}}}}}}}:}}}:}}:}}}}}}:}}}}}}:}}}}}:}}}:}}:}}}:}}}}}}}}:}}}:}}:}}}}}}:}}}:}:}}}}}}}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}}}}$33331}<[/[       ",
-"     4;)$}3$333*}}}}}}}:}}}}}}}}}:}:}}:}}:}}:}}:}}}}}}}}}}}:}}:}}}:}}}}}}}:}}}}}}}}}}}:}}}}}:}}}:}}}}}}}}}:}:}}}}:}}}}}}}}:}}}:}}:}}}}:}}}}}}:}}:}}:}}:}}:}}:}}}}}}}}}}}:}}:}}:}}:}}:}}:}}}:}}}}}*333:}_[[[       ",
-"     %%;$:333$3$}}:}:}}}}}}:}}:}}}}}}}}}}}}}}}}}}}}:}}}}:}}}}}}}}}}}:}}:}}}}}}:}}:}:}}}}:}}}:}}}}:}:}}:}}}}}}}}}}}}}}}}:}}}:}}}}}}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}:}:}}:}}}:}}}}}}}}}:}}}}}:}}}}:}}}}:$*}}<[[/       ",
-"     %%^}:$3333*}}}}}}}}}}}}}}}}:}}}:}}:}}:}}:}}:}}}}:}}}}:}}}}}:}}}}}}}}:}:}}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}:}:}:}}:}:}}}}}}}}}:}}}}}:}}}}}}}:}}:}}:}}:}}}:}}}:}}}}}}}}}}}}:}}}:}}}}}:}}}}}}}}}}:}}:}}}}3[[[       ",
-"     4%)}:$<3333}:}}}:}:}}:}}:}}}:}}}}}}}}}}}}}}}}}}}}}:}}}:}:}}}:}}}}}}}}}}}}}}:}}}}:}}:}}:}}}}}}}}}:}}}}}}}}}}}}}}}}:}:}}:}}}}}}}}}}}}}:}}}}}}}}}}}}:}}}:}}}}}}:}:}}}}}}}:}}}}}:}}}}:}}}:}:}}}}}}}}}}:[/[       ",
-"     %;^}}333333}}}:}}}}}}}}}}}}}}}:}}:}}:}}:}}:}}:}}}}}}}}}}}}}}}:}:}:}}}}:}:}}}}:}}}}}}}}}}}:}}:}:}}}}}}}}}}}:}}}}:}}}}}}}}:}}:}:}}:}}}}}}:}}:}}}}:}}}}}}}:}}:}}}}}:}}:}}}}}:}}}}}}}}}:}}}}}:}:}}:}}}:+[[       ",
-"     %%)}}3333331}}}}}}:}}:}}}:}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}:}}}}}}}}}}:}}}}:}}}}:}}:}}}:}}}}}}}}}}}:}}:}:}}}}:}}}}}}}}:}}}}}}}}}}}}:}}:}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}:}:}}}}}}}}}}}}}}}}:}}:[[/       ",
-"     %%)}}$$33331}}}:}}}}}}}:}}}:}:}}:}}:}}:}}:}}:}}}}:}}}:}:}}}:}}}}}:}}}}}}}}}:}}}}}}}:}}}}:}}:}}}:}}}}}}}}:}}}}:}}:}}}}}:}}:}}}:}}}}}}}}:}}}:}}}}}:}}}}}}}:}}:}:}:}}}}}:}}}:}}}}}}:}}:}:}}}}}:}}}}}}:[[[       ",
-"     ;%^}:333333*:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}:}}}}}}}:}}}}}}}}:}}}}:}}}}}}}}}}}}}}}:}}}}}:}}}}}:}}:}}}}}}:}}}}:}}:}}}}:}}}}}:}}}}}:}:}}}}}}}}}}}:}}}:}}}}}}:}}}}}}}}}:}:}}}}}}:}}:[[/       ",
-"     %;^}}$33333*}}:}}:}}}}:}}:}}}}:}:}:}}:}}:}}}}}}}:}}:}}}}}}}}}}}}:}:}}}}}:}:}}}:}}}}}}}}:}}}:}:}}:}:}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}:}}}}}:}}}}}}:}:}}}}}}}}}}}}}:}}}}}}:}:}}}}}}}}:}}:}}}}}:[[[       ",
-"     %;)}}*333$33}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}:}}:}}}}}}}:}}}}:}:}}}}}}:}}:}}}}}}}}}:}}:}}}}:}}}}}}}}}}}}:}:}}:}}:}}:}}:}}}}}}}}:}}}:}}}}}}}}}}}}:}}}}}:}}}}}}:}:}}:}}:}}}}}}}:}:}}}}}:}}}}}}}}}}}}:}}:[[/       ",
-"     %;)}}$33<$33:}}:}}}}}:}}:}}}}}}}}}}:}}:}}}}}}}}:}}}}}}}:}}}}}}:}}}}}}}}}:}}:}}}}}}}}}}:}}}}:}}}:}}}:}}}}}}}}}}}:}}}}}:}}:}:}}}:}}}:}}:}:}}:}}}}}:}}}}}}}}}}}}}}}}:}}}:}}:}}}}}}}}}}:}:}}}:}}}:}}}}:[[[       ",
-"     ;;^}:3$3$33$*}}}:}}}}}}}}}}}:}:}:}}}}}}}}:}}:}}}}:}}:}}}:}}}}}}}:}}}:}}}}}}}}}:}}:}}}}}:}}}}}}}}}}}}}}}}}:}:}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}:}:}:}}}}}:}}}}}}}}}}}}}}:}}:}}}}}}}}}}:}}}}}}}:[[/       ",
-"     ;%^}}133333$*}}}}}:}:}}:}}:}}}}}}}:}}:}}}}}}}}:}}}}}}}}}}:}:}}}}}}:}}}:}}:}}}:}}}}}:}}}}}:}}:}}:}}:}}:}:}}}}}:}}}}}}}:}}:}}:}}:}}:}}}}:}}}:}}}}:}}}}}}}}}:}}}}}:}}:}}:}}}:}}}}}}:}}}}}:}}}}}}}}:}}:[[[       ",
-"     ;;)}}*3333333}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}:}}}}}}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}:}}}:}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}:}}}}}}}}}:}}}}}}}}}:}}}}}}}}}}}:}}}}}:}}}}}:}}}:}}:}:}}}}}:[[/       ",
-"     %)^}}13333333:}:}:}}}:}}:}}}:}}}}:}}:}}}}}}}}:}}:}}}}}}}}}}}:}}}:}}:}}:}}:}}}:}}}}}}}}:}}}}}:}}}:}}:}}}}:}}:}}}}}}}}:}}:}}:}}}:}}}}}}}}}}:}}:}}:}}}:}:}}}:}}}}:}}}:}}}}}}:}}}}}}:}}}}}}}:}}}}}:}}}:+[/       ",
-"     ;;^}:1333333$:}}}}:}}}}}}:}}}}}}}}}}}}}:}}:}}}}}}}:}}:}:}:}}}}}}}}}}}}}}}}:}}}}}:}}}}}:}}}}}}:}}}}}}}:}}}}}}}:}}:}}}}}}}}}}:}}}}:}}:}}:}}}}}}}}}:}}}}}:}}}}}}}}:}}}:}}:}}}:}}:}}}}}}:}}}}}}:}}}:}}*[/[       ",
-"     ;)^1}:3333333*}}}}}}:}}}}}}:}}:}:}}:}}}}}}}}:}}}}}}}}}}}}}}}:}}}:}}:}:}:}}}}}}:}}}}:}}}}:}}}}}}:}}}:}}}:}}}:}}}}}}:}}:}}:}}}}}:}}}}}}}}}:}}:}}}}}}}}}}}}}}:}}}:}}}}}}}}}}}}}}}}:}:}}}}:}}}}}}}}}}}<+/[       ",
-"     ;;^3}:<3333333:}}}}}}}:}}}}}}}}}}}}}}}:}}:}}}}:}}:}}:}}}}}:}}}:}}}}}}}}}}}:}}}}}:}}}}}}}}}:}}}}}:}}}}}}}:}}}}}}:}}}}}}}}}}}:}}}}}:}}}:}}}}}}}:}}}:}:}}}:}}}:}}}}:}}}:}}:}}}}:}}}}}}}:}}}:}}:}}}:}}_[[/       ",
-"     ;))$}}33<3333$}:}:}}}}}}:}:}}:}}}:}}:}}}}}}:}}}}}}}}}}:}}}}}}}}}:}}}}}:}}}}}:}}}}}}:}}:}}}}}:}}}}}}}:}}}}}:}}:}}}}:}}}:}}:}}}}}}}}}:}}}}:}}}}}}}}}}}}:}}}}}}}}}}}}:}}}}}:}}}}}}}}}}}}}}}}}}}}:}}}}<[[/       ",
-"     );^$:}333333$$1}}}:}}:}}}}}}}}:}}}}}}}}}:}}}}}}}:}}:}}}}:}}}:}}}}}}:}}}}:}}}}}}:}}}}}}}}:}}}}:}}}:}}}:}}}}}}}}:}}}}:}}}}}}}}:}}:}}}}}:}}}:}}:}:}}:}}}}}}}:}}:}:}}}}}}:}}}}:}}:}:}:}}:}}:}}:}}}}:}}-[/[       ",
-"     ;)^,}}333333333}}}}}}}}:}}}:}}}}:}}}}:}}}}:}}:}}}}}}}}}}}}:}}}:}}:}}}:}}}}}}:}}}}:}}:}}}}}:}}}}}}}}}}}}}:}}:}}}}}:}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}:4[/        ",
-"     %^^-:}$3333333$:}:}}:}}}:}}}}}}}}}:}}}}}}}}}}}}:}}:}:}:}}}}}}}}}}}}}}}}}}:}}}:}}}}}}}:}:}}}}}:}}:}:}}:}}}}}}}}}}}}}}:}:}}}}}}:}}}}:}}}:}}:}}:}}}}}:}}}}:}}}:}}}}}}:}}:}}}}}:}}}}}:}}:}}:}}}:}}}:}}4[[        ",
-"     ;)^4}}*333333331}}}}}}}}}}}}}:}}}}}}:}}:}:}}}}}}}}}}}}}}:}}:}}:}}}:}}:}}}}}}:}}}}:}}}}}}}}}:}}}}}}}}}}}:}}:}}:}}}:}}}}}}:}}:}}}}:}}}:}}}}}}}}}:}}}}}}}}}}:}}}:}}}}}}}}}}}}}}}:}}}}}}}:}}}:}}}:}}}:(//        ",
-"     ;^^%}}*33333$<3*}:}}:}}}:}:}}}:}}:}}}}}}}}:}:}}:}}:}}}}}}}}}}}}}:}}}}}}:}}}}}}:}}}:}}}}:}}}}}:}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}:}}}:}:}}:}}:}}:}:}}}}}}}:}}}:}}:}:}:}:}}}}}:}}}}}}}}}}}}}}}:^[[        ",
-"      ^^^}}:3333<3333}}}}}}:}}}}}}}}}}}}:}}:}}}}}}}}}}}}}:}}}:}}:}}}}}}:}}}}}}:}}}}}}}}}}:}}}}:}}}}}}:}}}:}}}:}:}}:}}:}}:}:}}:}}:}}}}}:}}}}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}:}}}:}}}:}}}}:}:+//        ",
-"      ^^^}}:3333$333$1}}:}}}}}}:}}:}}:}}}}}}}}}}}:}}}:}}}}:}}}}}}}}:}}}}:}}:}}}}:}}:}}:}}}}}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}:}:}}}}}:}:}}:}}}}}}}}}}}:}}:}:}}}}}}}}}}}}}}:}}}:}}}}:}}}}*[[[        ",
-"      )^2*}:33333$3333}}}}}}}:}}}}}}}}}:}}:}}}:}}}}:}}:}}}}}:}}:}:}}}:}}}}}}}}:}}}}}}}}}}:}:}}}:}}}}}:}}}}}}:}}:}}:}}:}}}:}}:}}}}}}}}:}}:}}}}}}:}}}}}}}}}}:}}}:}}}:}}}}}}}:}:}:}}:}:}:}}}}}}}}:}}}}}}}_[//        ",
-"      )^^<}}$333333333:}:}:}}}}}}:}}:}}}}}}:}}}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}}}:}}:}}:}}}}}:}}}}}}}}}:}:}}}}}}}}}}}}}:}}}}}}}}:}}:}}}}}}:}}}}}}}:}}}:}}}}:}}}:}}}}}}:}}}}}}}}}:}}}}}}}}:}}:}}}}}}:}:}-[/[        ",
-"      )2^-}}$333333333*}}}}}}}}:}}}}}}:}}}}}}:}}:}:}}}}}}:}}:}}}}}:}}:}}}}}:}}}}}}}}}}}}}}:}}}:}:}:}}}}}}}:}}:}}:}}:}}}}}:}}:}}}}}}}}:}}}}}:}}:}}}}:}}}:}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}:}}}}:%[/         ",
-"      ;2^%:}*333333333$:}}:}:}}}}}}:}}}}:}}}}}}}}}}}}:}}}}}}}}}:}}}}}}}}:}}}}:}}:}}:}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}}}}:}}:}}}}:}}}:}}}}:}}}}}}}}}:}:}}}}:}}:}}}}:}:}}}:}}:}:}}:}}:}}}}}}}}}}:^//         ",
-"      )22^}}:33333333331}}}}}}}}}:}}}}}}}}:}:}}:}}}:}}}}}:}}:}}}}:}:}}:}}}}:}}}}}}}}}}}}:}}}}}}:}}:}:}}}}}:}:}}:}}}:}}}}:}}:}}}}}}}}}}}}}}}}}}:}}}}:}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}}}:}}1[[/         ",
-"       ^22:}}3333333333$}:}}:}:}}}}}:}}:}}}}}}}}:}}}}}:}:}}}}:}}}}}}}}}}}}}}}}:}}:}}:}}}}:}}:}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}:}}:}}:}}:}}}:}}}}}}}}}:}:}}}}:}}:}}}}}}}}}}:}}:}}}}:}}}:}}:}}}:}:}}}}}3[//         ",
-"       ^223}}33333333333:}}}}}}}}}:}}}}}}:}}}:}}}}}}}}}}}}}}}}}:}}}:}}}}:}}}:}}}}}}}}}:}}}}}}}}}:}}}}:}}}}}:}}}}}}:}}:}}:}}:}}}}}}}}}}}}}:}}}}:}}:}}}}}}}}:}}}}}}:}:}}}:}}}}}}}:}}}:}}}}}}}}}}}}}:}}:,[[/         ",
-"       (22-}:*3<33333333*:}}}:}:}}}}}}:}}}:}}}}}}:}:}}}}}}:}}}}}:}}}}:}}}:}}}}:}}}:}}}}}}}:}}:}}}:}}}}}}:}}}:}}:}}}}}:}}}}}}}}:}}:}}:}:}}}}}}}}}}}:}:}}:}}}}}:}}}}}}}:}}}}:}:}}}}}}}}}:}}}:}}}:}}}}}})[/          ",
-"       ^22;}}13333333333$:}:}}}}}}}:}}}}}}}}}}:}}}}}}:}:}}}:}}}}}}:}}}}}}}}}}}}}:}}}:}}:}}}}}}}}}}}:}}:}}}}}}}}}}}:}}}}}:}}:}}}}}}}}}}}}}}:}}:}:}}}}}}}}}}:}}}}:}}}:}}}}}}}}}}}}}:}}:}}}:}}}}}}}:}}::2//          ",
-"        222}}}333<3333333$}}}}:}:}}}}}:}}}}:}}}}}:}}}}}}}}}}}}:}}}}}}:}}}:}}:}}}}}}}}}}}}:}}}:}:}}}}}}}}}:}}:}}:}}}}}:}}}}}}}}}}:}}:}}}:}}}}}}}}}}}}}}}:}}}:}}}}}}}}}}}:}}}}}:}:}}}}}}}}}}:}}:}}}}}}3[[/          ",
-"        22+$}:333$<3333333:}}}}}}}}}:}}}:}}}}:}}}}:}}}}:}}:}:}}}:}}}}}}:}}}}}}}:}}:}}:}}}}}:}}}}}}}}:}}}}}}}}}}}}}:}}}}:}}:}}:}}}}}}}:}}}:}:}}}}:}:}:}}}}:}}}}}:}}:}:}}}:}:}}}}}}:}}}:}}}}}}}}}:}}}}-//[          ",
-"        222-}}*333$3333333$:}}}:}:}}}}}}}}:}}}}:}}}}:}}}:}}}}}}}}}}:}}}}}:}}:}}}}}}}}}}:}}}}}}}:}:}}}}:}}:}}:}}:}}}}}}}}}}}}}}}:}}:}}}}}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}:}}:}}:}}}:}}:;[/           ",
-"        (+2;}}:333<$33333331}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}:}:}}}}:}}}}}}}}}}:}}:}}}}}}:}}}:}}}}}:}}}}}}}}}}}}}:}}:}}:}}:}}}}}}}}}}:}:}}}}}}:}}}}}}:}}:}}}}}}:}}}:}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}}12//           ",
-"         2++:}:33$$<33333333}}}}}:}:}}}}}:}:}:}}:}:}}:}}}}:}}}}}}:}}}}}:}}:}}}}:}}}}}:}}}}:}}}}}}}}}:}}}:}}:}}:}}}}}}}}}}}}}:}}:}}:}}}}}:}}}}}}}:}:}}}}}}}:}}}}}:}}}}}}:}}}}}}}:}}:}}}:}}:}}:}}}:}}<[//           ",
-"         22+<}}$3$33333333331}}:}}}}}:}}}}}}}}}}}}}}}}:}}}}}}}:}}}}}:}}}}}}}:}}}}}:}}}}}}}}}}:}:}}}}}}:}}}}}}}}}:}}:}}:}}}:}}}}}}}}}}}}}}}:}}:}}}}}}}:}}:}}}:}}}}}}}}}}}:}}:}}}}}}}}:}}}}}}}}}:}}}}%[/[           ",
-"         2++%}}*3333333333333:}}}}:}}}:}}}}}}:}}}}}:}}}}:}}:}}}}:}}}}:}}:}}}}}}:}}}:}}}:}}}}}}}}}:}}}}}}}:}}}:}}}}}}}}}:}}}:}}}:}}:}}}:}}}}}}}}}}}:}}}}}}}}}}}:}}:}:}:}}}}}}}}}:}:}}}}}}:}}:}}}}}}:2[/            ",
-"         (+22:}:33333333333333}}}}}}}}}}:}:}}}}:}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}}}}:}}}:}:}}}:}}}:}}:}}}}:}}}}:}}:}}}}}}}}}:}}}}}}:}}}}:}}}:}}:}}}}:}}:}}}:}}}}}}}}}}}}:}}:}}}}}}}}}:}}}}}}}}:}}$[//            ",
-"          +++<}}33333<3333333$1:}}:}}}}}}}}}}:}}:}}:}:}}:}:}}}}}}:}:}}}:}}}}:}}:}}:}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}}}}:}}}}}}}:}}}}}}}}:}}}}}:}}}}}}}:}}}}}}:}}}}}}:}}:}:}}}}}}:}:}}}:}4[/[            ",
-"          (+2%}}*3333$<33333333:}}}}:}:}}:}}}}}}}}}}}}}}}}}}}:}:}}}}}:}}}:}}}}}}}}}}}:}}}}}}}}}:}}:}}:}}:}}:}}}}:}}:}}:}}}:}}}:}}}}}:}}:}}}:}:}}}}}}}:}}}}}}}:}}}}:}:}}}}}:}}}}}}}}}}}}}:}}}}}}}}:2//             ",
-"          2[+2:}:333333$<333333*}:}}}}}}}}}:}}}}:}}}}:}}}}:}}}}}}}}}}}}}}}}}:}}:}}:}}}}:}:}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}:}}}}}}}}}}}}:}}}:}}}:}}}:}}}}:}}}}}}}:}}}}}}}}:}}:}:}}}}}}:}}}}3[//             ",
-"           +++_}}333333$$33333331}}:}}}:}}}}}}:}}}:}}}:}}}}}}:}}}:}}}:}}}:}}}}}}}}}}}:}}}}}:}:}}}:}}:}:}}:}}}}}}:}}:}}:}}}}}}}:}}}}:}:}}}:}}}}}}}}}}}}}}:}}}}:}}}}}:}}}}}}}:}:}}}}}}}}}}}}:}}}:}};[/[             ",
-"           2++;}}*3333$<3$<333333:}}:}}}:}}:}}}}}}}}}}}}:}:}}}}}}:}}}:}}}:}}}:}}:}}}:}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}}}}}}:}}:}}}:}}}}}}}}}}:}}:}}:}}}:}}}}}}}}}}}:}}}}:}}:}}}}}}:}}:}}:}:}}}}}}}}:+[/              ",
-"           (+++*}:$333333$33333333}}}}}}}}}}}}}:}}:}}}}}}}}}:}:}}}}}}}}}}}}:}}}}}}}}}}:}:}}}}}}}:}}:}}}:}}:}}}}:}}:}}}:}}}}}}}}}}:}}}:}}}}}}}}}}}}:}}}}:}}:}}:}}}}}:}}}}}:}}}}}}}}}}}}}}}}}}:}}},[//              ",
-"            +++|}}*<333333333333333}:}}}:}}:}:}}}}}}}:}}}:}}}}}}}}:}}}:}}}}}}}:}}}:}}}}}}:}}:}}}}}}}:}}}}}}}}}}}}}}:}}}}}:}}}:}}}}:}}}}:}}:}}}:}}}}:}}}}}}:}}}}}:}}}}:}}}}}}:}}:}}:}}}}:}:}}}}}:)[//              ",
-"            ([+2}}:$3<$3333<3333333*}}:}}}}}}}}:}}:}}}}:}}}}}}:}}}}}:}}}:}}:}}}}:}}}:}}}}}}}}}:}}}}}}}}:}}:}}:}}}:}}}}}:}}}:}}}}}}}}}:}}}}}}:}}}}}}}}}:}}}}}}:}}}}}}}}:}}}:}}}}}}}}}:}}}}}}:}}}3[/[               ",
-"             +[+_}}$$$<33333333333331}}}}}}}}}}}}}}:}}}}}}:}}}}}:}}}}}}}}}}}}}}}}}}}}:}:}}}:}}}}}:}}:}}}}}}}}}:}}}}}:}}}}}}}}}}}:}}}}}}}:}}}}}}:}}:}}}}}}}:}}}}:}}:}}}}}}}}}}}:}}:}}}}}}:}}}}}:%[//               ",
-"             2++(}}*$$3333333333333331}:}:}:}}}:}}}}}:}}}}}}:}}}}}}:}}:}}:}}:}:}}}:}}}}}}}}}}}:}}}}}}}:}}}:}}}}}}}}}}}}}:}}:}:}}}}:}}}:}}}:}}:}}}:}}}:}}:}}}}}}}}}}:}}}:}}:}:}}}}}}:}}:}}}:}}}1[[/                ",
-"             ++[+$}}3333333333<3333333:}}}}}:}}}}:}}}}}:}:}}}}}}:}}}}}}}}}}}}}}:}}}}}}}}:}}:}}}:}}:}}}}:}}}}}}}:}}:}}:}}}}}}}}:}}}}:}}}}}}}}}}:}}}}}}}}}}}}}:}}:}}}}:}}}}}}}}}}}:}}}}}}}}}}}}:-[//                ",
-"              2[+%:}*3333333333333333331}}}}}}}}}}}:}}}}}}}:}}:}}}}:}}:}}:}}}}}}}}:}}:}}}}}}}:}}}:}}}}}}}:}}:}}}}}}}:}}}:}}}}}}}:}}}}}:}:}}}}}}}}}:}}:}}}:}}}}}}}:}}}}}:}}:}}}:}}}:}}}}:}:}}}1+[//                ",
-"              2+[+*}}3333333333333333333*}}}}:}:}}}}}}}}:}}}}}}}:}}}}}}}}}:}}:}}}}}}}}:}}:}}}}}}}}}:}}:}}}}}}:}}:}}}}:}}}}:}}:}}}}}}}}}}}}}:}}}:}}}}}}}}}:}}}:}}}}}}:}}}}}}}}}}}}}}}:}}}}}:}:,[/[                 ",
-"               +[+%:}*3333<333333<33333331}}}}}}}:}}:}}}}}:}}}}}}}}:}}:}}}}}}}}:}}}:}}}}}}}}}:}}}}}}}}}}}:}}}}}}}}:}}}}:}}}}}}}}:}:}:}}}:}}}}:}}}}:}}:}}}}}:}}}:}}}}}}}:}:}}:}}:}:}}}}}}}}}}:+[//                 ",
-"               2+++*}:33333333333333333333*}}:}}}}}}}}:}}}}}:}}:}}}}}}}:}}}}:}}}}}}}}:}:}}:}}}:}:}}:}}:}}}}:}}}:}}}}}}}}}}:}}:}}}}}}}}}}}:}}}}}:}}}:}}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}:}:}}}}}-[//                  ",
-"                +[+;}}*333333333333333333331}}}:}:}}:}}}:}}}}}}}}}:}}}}}}:}}}}:}:}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}:}}:}}}}}}}}}}}}}}:}:}}}}}}}}}}}}}}}:}}}}}:}}:}}}:}:}}}}:}}:}}}}:}}}}}:}::+[//                  ",
-"                ([++*}:333<33333333333333333$}}}}}}}}}}}}}}:}}:}}}}:}:}}}}:}}}}}}}}}}}:}}:}}:}}}:}}:}}:}}:}}}}}:}}}}}}}:}}:}}:}:}:}}}}}}}}:}}:}}}:}}}}}:}}:}}}}}}}}}}}}:}}}}}}}:}}}}}:}}}}}-[//                   ",
-"                 +[+%}}*3333333333<33333333333}}}:}}}:}:}}}}}}}}}:}}}}}:}}}}}:}}}}}}:}}}}}}}}}:}}}}}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}}:}}}:}}}:}}}}}}}:}}:}}}}}}}}}:}}}}}}}}}}}}}:}}:+[//                   ",
-"                 ([+[3:}33333<333333333333333331}}:}}}}}:}}:}}:}}}}}}}}}}}:}}}}}:}}}}}}:}}}}}}}}}:}}:}}:}}}}:}}:}}}}:}}:}}:}}}}}}}:}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}}:}:}:}}}}:}}:}}:}}:}}}}:4[//                    ",
-"                  +[+)}::333333333333<33333333331}}}}}}}}}}}}}}}}}:}}:}}}}}}}:}}}}}}}:}}}:}:}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}}:}:}:}}}}:}}}}:}}:}}}:}}}:}}}}:}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}*+//[                    ",
-"                  ++[+,}}$3333<333333333333333333*::}:}}}:}}:}}:}}}}}}:}}:}}}}}:}}:}}}}}}}}}}}}}}}}:}}:}}}}}}}}:}:}}:}}:}:}}}}}}}}:}}}}}}}}}}:}}}}:}}}}}}}}}}}}}}}}}}:}}}}:}}:}}:}}:}:}}:%[/[                     ",
-"                   +[+21}:$333333333333<3333333333$1}}}}}}}}}}}}}:}}}}}}}}}:}}}}}:}}}:}}}:}}}:}}:}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}}}}}:}:}}}:}}}}:}}}:}:}:}}:}}}}}:}}}}}}}}}}}}}}}}}}}}}}<[//                      ",
-"                    +[[|}}*33333<333333333<333333333$:}:}}:}}:}}}}:}:}}:}}}}}:}}}}}}}:}}}}:}}}}}}:}}}:}}}}}:}}:}}}}:}}:}}:}}}:}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}}}:}}:}}:}}:}}:}}}}:}:([/[                      ",
-"                    2[[+3}}$333333333333333333333333331}}}}}}}}}:}}}}}}}}:}}:}}}}}:}}}}:}}}}:}}:}}}:}}}}:}}}}}}}:}}}}}}}}}}}}}}}}:}:}}}}}}}:}}:}}}}:}}}}:}}:}}}}}:}}}}}}}}}}}}}}}}:}}}}-[//                       ",
-"                     +[+(:}13333333333333333333333333333*:}}:}}}}}}}}}:}}}}}}}}:}}}}}}}}:}}}}}}}}}}}:}}}}}}}:}}}}}}:}:}}}}}:}}}}}}}}:}}}:}}}}}}}:}}}}:}}}}}}:}}:}}}:}}:}}:}}:}}:}}}}:}$+///                       ",
-"                     2[[+-}}*33333333333333333<3333333333*:}}}}:}}:}:}}}}}:}}:}}}}:}}:}}}}}:}}}}:}}}}}:}}:}}}}:}}:}}}}}:}:}}}:}:}}}}}}}}}}:}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}:^[/[                        ",
-"                      +[[+3}}$333<3333333333333333333333333$:}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}:}:}}}}:}}}}}:}:}}}}:}:}}}}:}}:}}:}}:}}:}}:}}}}}:,[//                         ",
-"                       +[+(}}}3333333333<33333333333333333333$1}:}}}}:}}}}}}}:}:}:}}}}:}}}}:}}}}:}}:}}:}}:}}:}}:}}:}}}:}}}:}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}*+[//                         ",
-"                       ([[[|:}133333<33333333333<33333333333333$1}:}}}}}:}:}}}}}}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}}}}}:}}:}}}}}}}}}}}}:}}:}:}}}:}:}}}}}:}}:}}:}}:}}:}}:}}:}:}::^[//                          ",
-"                        +[[[3:}*333333333<333333333333333333333333*:}}:}}}}}}}}}}:}}}}:}:}}}}}}:}}:}}:}}:}}:}}:}}}}}}:}}:}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}:}}}}}}}}}}}}}}}4[//                           ",
-"                         +[[(:}}$33333333333333333<33<3333333333$3$3$1:}}}:}:}:}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}:}}:}:}}}}}:}}:}}}:}}}:}:}}}}}:}}}}}:}}}}}}}:}}:}}:}}}:3+//[                           ",
-"                         ++[[)}:}333333333333<333333333333333333<$33333$*}}}}}}}}}:}:}}}}}}}}}:}}:}}:}}:}}:}}}}}}}}}}}}}}:}}}}}}}}}:}}}}}}}:}}}:}}}}}}}}}}}:}}}}:}}}:}}}}}}}}}}:}$2///                            ",
-"                          ([[[|}:}<333333333333333333333<3333333333333$$33$*::}:}}}}}:}}:}}:}}}}}}}}}}}}}}}}:}}:}:}}:}:}}}}}:}}}:}}}}}}:}}}}}}}}}}}}:}:}}:}}}}}}}:}}}}}}}:}}:}}}:;//[                             ",
-"                           +[+[<}}:333333333333333333333333333333333333333333$$*1}}}}}}}}}}}}:}}:}}:}}:}}}}}}}}}}}}}}}}}:}}}}}:}}}}}:}}}}:}}}:}}:}}}}}}}}}}:}:}}}}}:}}:}}}}}}}}}|[///                             ",
-"                            +[[+3}}1333333333333333333333333333333333333333333333$$*::}:}}:}}}}}}}}}}}}}:}}:}}:}}:}:}}}}}}}:}}}}}:}}}:}}}}}}}}}}}:}:}}}:}}}}}}}}:}}}}}}}}:}}}:}_[///                              ",
-"                             [+[(::}*3333333333333333333333333333333333333333333333$33$$**:}}:}}:}}:}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}:}}}}:}}:}}}}}}}:}}}}}:}}:}}}}:}}:}}}}}:}}$+[//                               ",
-"                             ([[[(}}}*33333333333333333333<3333<3333333333333333333333$$$3333$$***:*:}:}}:}}:}}:}}:}}}}}}}}:}}:}}:}}}}:}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}32///                                ",
-"                              +[[+;:}}*33<333<3333<333333333333333<333333333333333333333$3333333$$$$33333$**::}}}}}}}}:}}:}}}}}}}}}}}}}}}:}}}}}}:}}}:}}}}}}:}}:}:}}:}}:}}}}}:^[/[                                 ",
-"                               +[[[;}}}13333333333333<333333333333333333333333~333333333333333333333~333$$$$$$$$$:}1}}}}}}}}:}}:}}:}}:}}}}:}:}:}}:}}}}}}:}}}}}}}}}}}}}}}}}:1;////                                 ",
-"                                +[[+|}}}13333333333333333333<33333333<33333333333333333333333333333333333333333$$$$$*}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}}:}}}}}:}}}}}:}}:}}}:}:%[/[/                                  ",
-"                                 +[[[,:}}:333<3333333333<33333333333333333333333~333~33333~333333333333333333333$$3$$$*:}:}}:}}:}}:}}:}}}}}}}}:}}}}:}}:}}}}}:}:}}}}}}:}}}:-[///                                   ",
-"                                  [[[[,}:}:$3333<33333333333333<33~3333333<33<333333333333333~33333333333333333333333333*:}:}}}}}}}}}}}}}}:}}}}}:}}}}}}}:}}}}}}}:}}}}}}}:|[//[                                    ",
-"                                   +[[[,}}:}$333333<333333333333333333<3333333333333<33333333333333<33~333~3333333333333$$$*}}:}:}}:}}:}}}}}:}}}}:}}}}}}}}}}}:}}}:}}}:}:-[/[/                                     ",
-"                                    [[[+|}}}}*$3333333~333333333333333333333333333333333<33333333333333333333333333333333$<$*}}}}}}}}}}}:}}}}}:}}}}:}:}}:}:}}}}}}}}:}}:-[[//                                      ",
-"                                     [[[+|:}}}*33333333333~33333333333333333333<3333333333333333333333<3333<333333333333$$$$$$*}}:}}:}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}}}:-[///                                       ",
-"                                      [[[[%}}}}:$3333333<3333333<33333333333333333333333333<333333333333333333<3333333333<3$3$3$}}}}}}:}}}}}:}}:}}:}}:}}:}}:}}}}:}}::4[///                                        ",
-"                                       +[[[;:}:}}*33<3333333333333333~3333333<3333333333333333333333333333333333333333333$$$333$3}:}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}:}:;[///                                         ",
-"                                        [[/[(*}}}::33333333333333333333333333333333333<3333333<333333333333333333~333333333<$$333$}}}:}:}}}}:}}:}}}:}:}}:}}}}}}}}:1)[/[/                                          ",
-"                                         +[[[(3}}}}}*3333333333333333333333333333<33333333333333333333333333~3333333<33333$<$<$333$:}}}}}:}}}}}}}:}}}}}}}}:}}}:}}*2[///                                           ",
-"                                          [[[[+<:}:}}:33333<3333<333333<33333333333333333333333333<33333333333<33333333333333333333$}}}}}}}:}:}}}}}}}}:}}}}}:}}:<+[//[                                            ",
-"                                           +[[[[|:}}}:}$33333333333333333333333333333333<333~333333333333<3333333<3333333333333333331:}:}}}}}}:}}}}:}}}}}:}}}}:-+////                                             ",
-"                                            +/[/[)*}}}}}:$33333333<333333~3333333~3333333333333<33333<3333333333333333333333333333333}}}}:}}}}}}:}}}}}:}}}}:}1%[/[/                                               ",
-"                                              [[[[+<:}}}}}13333333333333<333<333333~333333333333333333333333333333333333<333333333333*:}}}}:}}}}}}}}:}}}}:}}3([///                                                ",
-"                                               [[[[[|:}}}}}:*3333333~33333333333333<3333<3333333333333333333333333<33333333333<3333333:}}}}}}:}}:}}}}}:}}}1,+//[/                                                 ",
-"                                                [/[[[(3:}}}}}}*3333333333333333333333333333<333333~3333333333333333333333333333333333$1}}:}}}}}}}}:}}}}}:*;[////                                                  ",
-"                                                  [//[[|:}}}:}}}$333333333333<333333333333333~3333333<33333333333333333333<33333333333$}}}:}:}:}}}}:}:}:_+[/[/                                                    ",
-"                                                   +/[[/(~:}}}}}}}*$3333333333333333<3333333333<33333333<333<333333<3333333333<3333333$}}}}}}}}}}}}}:}*%[[///                                                     ",
-"                                                     [/[/[;*}}:}:}}}:$$333333333333333333333333333333333333333333333333333333333333333$}}:}}}}}:}}}}:,[[//[                                                       ",
-"                                                      [[/[[+=:}}}}}}}}:*3333333~333333333<3333333<333333333333333333333333333333333333$}}}}}:}}}}::3([[///                                                        ",
-"                                                        [[/[[(|:}}}}:}}}::$$333<3333~33333333333333333333~333<333333<333333333333333331}}:}}}}:}}*)[[///                                                          ",
-"                                                         [[//[[(|::}}}}}}}}::$3333333~33333<3333333333<333333333333333<333333333<33333}:}}}}}}:*%[[////                                                           ",
-"                                                           [/[/[[(|}::}}}:}}}}}1$33333333333333333~3333333333333333333333<33333333333*}}}:}:}$4[[////                                                             ",
-"                                                             [/[/[/(|*:}}}}}}}}}}}:*$333333333~333333333<33333<33333333333333333333$*}}}}}}3;+/[///                                                               ",
-"                                                               [/[/[[[=3}}}:}}:}}:}}}:1$$333333333333333333333333333333333333333333*}}:}1<)[[///[                                                                 ",
-"                                                                 [/[/[/[(|::}}}}}}}}}}}}}:1*$33333<333333~3333333333333333<333<33$:}:}$|2[[///[                                                                   ",
-"                                                                   [//[/[[+;<:}}}}}}}}:}}}}}}::**$$33333333<3333<33333333333333*:}}:,)+[/////                                                                     ",
-"                                                                      /[////[[)<1:}:}}}}}}:}}}}}}}}::*$$33333~3333333333333$*:}:1,;[//////[                                                                       ",
-"                                                                        [[////[/[)|3:}:}}}}}}}}}:}}}}}}}}}}:::**1*$$**:*:::::$|)[[//[//[                                                                          ",
-"                                                                           /[////[/[[(=<*:::}:}}}:}}}}}}:}}}}}}}}}}}}}:::<|)+[[/////[/                                                                            ",
-"                                                                              [/////[[/[/((=|<31:::}:}}}}}:}:}:::1$<|=((/[////////[                                                                               ",
-"                                                                                  [////////[//[/[((((%|;=%|;=(((([[[[/[///[///[                                                                                   ",
-"                                                                                      [////////[//[/[//[/////[/////////////                                                                                       ",
-"                                                                                            [[////////////[////////[/                                                                                             ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  "};
diff --git a/perl-install/pixmaps/mouse_3b+_mini.xpm b/perl-install/pixmaps/mouse_3b+_mini.xpm
deleted file mode 100644
index c4b4960b3..000000000
--- a/perl-install/pixmaps/mouse_3b+_mini.xpm
+++ /dev/null
@@ -1,211 +0,0 @@
-/* XPM */
-static char * mouse_3b+_mini_xpm[] = {
-"105 175 33 1",
-" 	c None",
-".	c #0C1530",
-"+	c #FE9A02",
-"@	c #212F55",
-"#	c #7C6535",
-"$	c #E8A518",
-"%	c #B68725",
-"&	c #DAA22A",
-"*	c #95742E",
-"=	c #E6A929",
-"-	c #757C98",
-";	c #F7B01E",
-">	c #B2924F",
-",	c #FDA106",
-"'	c #61543C",
-")	c #ACAECB",
-"!	c #7E84A0",
-"~	c #AFB2CD",
-"{	c #878DAC",
-"]	c #13234A",
-"^	c #E2A62E",
-"/	c #8D6F32",
-"(	c #5B6485",
-"_	c #3A4461",
-":	c #BABEDA",
-"<	c #9A9ABD",
-"[	c #FEB212",
-"}	c #D6A236",
-"|	c #465173",
-"1	c #A6A8C6",
-"2	c #9EA0C0",
-"3	c #697293",
-"4	c #313C5E",
-"                                                (3<|.                                                    ",
-"                                                ((<|.                                                    ",
-"                                                (-<4.                                                    ",
-"                                                (-<4.                                                    ",
-"                                                (3<@.                                                    ",
-"                                                (!<].                                                    ",
-"                                               (|!<..                                                    ",
-"                                               (|!<].                                                    ",
-"                                               ((!{].                                                    ",
-"                                               (|<<..                                                    ",
-"                                               ||{<].                                                    ",
-"                                               (_!<..                                                    ",
-"                                               (|!<].                                                    ",
-"                                               (|!<].                                                    ",
-"                                                _!<@.                                                    ",
-"                                                |3<@.                                                    ",
-"                                                33<4]                                                    ",
-"                                               2--<-@4                                                   ",
-"                                              {!!<<<!_]                                                  ",
-"                                              (|<<<<<!]]                                                 ",
-"                                              |_2<<<<<@.                                                 ",
-"                                              |_{<<<<<_.                                                 ",
-"                                              ||{<<<<<|]                                                 ",
-"                                              |_!<<<<<3.                                                 ",
-"                                              -(-<<<<<!].                                                ",
-"                                             )13|_444__]_-!                                              ",
-"                                          ~)1{!((33-333((33---                                           ",
-"                                       ~~1{{<~::~)11)111~:)<-(33                                         ",
-"                                     ~~2{/|:12<<<<<<<<<<<<<:{]||((                                       ",
-"                                    ~1{>;=@{2<<<<<<<<<<<<<<<|4[&'|||                                     ",
-"                                  ~){>;[[[|3)<<<<<<<<<<<<<<<]#[[[}||||                                   ",
-"                                 ~1!^[;,;[#_:<<<<<<{<<<{<<<{]%[[[[;*4__                                  ",
-"                                ~<>;,+++[[%]:1<<<<<<<<<<<<<3]&[[[[[[&___                                 ",
-"                               ){>,,++++[[>]1~<<<<((((<<<<2(@[[[[[[[[='44                                ",
-"                              1!&,+++++[[[$]<:2<<@....]{<<1|4[[[[[[[[[;#@4@                              ",
-"                             1!^,+++++[[[[[@!:)<<@....]{<<)_'[[[[[[[[[;[#@@@                             ",
-"                            1!$++++++[[[[[[4-::<<].....{<<~@'[[[[[[[[[[[[#@@                             ",
-"                           1!&++++++[[[[[[[_3::1<4....4{<<:]/[[[[[[[[[[[[[#@@                            ",
-"                          1!&,+++++,[[[[[[['(:::<].....{<<:]/[[[[[[[[[[[[[;'@]                           ",
-"                         1!}++++++;[[[[[[[['|:~:14....4{<<1]%[[[[[[[[[[[[[[[_@]                          ",
-"                        1<>$+++++,[[[[[[[[[#|:::~@....]{<<1]%[[[[[[[[[[[[[[[$4]]                         ",
-"                       1<!,+++++[[[[[[[[[[;/|::::4]..]4{<21]>[[[[[[[[[[[[[[[[>]]]                        ",
-"                       2-;+++++,[[[[[[[[[[[/_::::......{<<{]}[[[[[[[[[[[[[[[[[*]]                        ",
-"                      2!}+++++[[[[[[[[[[[[;/_:~::_....4{<2<]%[[[[[[[[[[[[[[[[[;']]                       ",
-"                     1<*;++++,[[[[[[[[[[[[[%@::::].....{<<{]$[[[[[[[[[[[[[[[[[[&@]]                      ",
-"                     <-;++++;[[[[[[[[[[[[[[*4:::~@....@{<2<]=[[[[[[[[[[[[[[[[,[[*]]                      ",
-"                    2!>,+++,[[[[[[[[[[[[[[[%@::::......{<<<]$[[[[[[[[[[[[[[[[[,[[_]]                     ",
-"                   <<![+++,[[[[[[[[[[[[[[[[*4:~::_...]4{<<!]=[[[[[[[[[[[[[[[[[[,[&]]]                    ",
-"                   <-$,++,[[[[[[[[[[[[[[[[[%@::::].....{<<!]&[[[[[[[[[[[[[[[[[[,,[#]]                    ",
-"                  <{%;++,[[[[[[[[[[[[[[[[[;*4:::~_....4{<<!]=[[[[[[[[[[[[[[[[[[,+[$@]]                   ",
-"                  <3=,+,[[[[[[[[[[[[[[[[[[[%@::~:......!<<!]=[[[[[[[[[[[[[[[[[[[+,[*]]                   ",
-"                 <!>;+,[[[[[[[[[[[[[[[[[[[[*@::::_...]_{<1{]=[[[[[[[[[[[[[[[[[[[,+,;@]]                  ",
-"                 <3[,+[[[[[[[[[[[[[[[[[[[[[*_::::......21:{]=[[[[[[[[[[[[[[[[[[[,++[*]]                  ",
-"                <!>;+[[[[[[[[[[[[[[[[[[[[[[/_:~::_]..]_)::<]}[[[[[[[[[[[[[[[[[[[;+++[4]]                 ",
-"                <3[,,[[[[[[[[[[[[[[[[[[[[[[/_::::......1::2]>[[[[[[[[[[[[[[[[[[[[+++,*]]                 ",
-"               {!>[[[[[[[[[[[[[[[[[[[[[[[[[(|:~::|]..]|)::1]}[[[[[[[[[[[[[[[[[[[,++++[@]]                ",
-"               {-;[[[[[[[[[[[[[[[[[[[[[[[[['(::::......1::~]*[[[[[[[[[[[[[[[[[[[;++++,/]]                ",
-"              {{*[[[[[[[[[[[[[[[[[[[[[[[[[[_(::~:_]..]_)~::]%[[[[[[[[[[[[[[[[[[[,+++++,]]]               ",
-"              {3&[[[[[[[[[[[[[[[[[[[[[[[[[[_3::::......1:::@/[[[[[[[[[[[[[[[[[[[++++++;']]               ",
-"              {|%[[[[[[[[[[[[[[[[[[[[[[[[[[@-::~:4]..]_):::4#[[[[[[[[[[[[[[[[[[;++++++,_]]               ",
-"             {-_/[[[[[[[[[[[[[[[[[[[[[[[[[[]{::::......2:::||[[[[[[[[[[[[[[[[[[,++++++,@]]]              ",
-"             {33@[[[[[[[[[[[[[[[[[[[[[[[[[&]<:::~_]..]_1:::(|[[[[[[[[[[[[[[[[[,+++++++*]4(.              ",
-"             !{~@#[[[[[[[[[[[[[[[[[[[[[[[[%]~::::......1:::3][[[[[[[[[[[[[[[[[+++++++$@]{<]]             ",
-"            !3):{@>[[[[[[[[[[[[[[[[[[[[[[[*@:~:::(]..]3):~:{@[[[[[[[[[[[[[[[[+++++++,_]|::4]             ",
-"            !-::~3]*[[[[[[[[[[[[[[[[[[[[[[#_:::~::-(33:::::2]>[[[[[[[[[[[[[[++++++,$_](~2~3.             ",
-"           {-<~:::!@(;[[[[[[[[[[[[[[[[[[[[||::::::::~:::::::]>[[[[[[[[[[[[+++++++;%@]()2<)1]]            ",
-"           !3~:::::24@/;[[[[[[[[[[[[[[[[[[@-:~::~:::::~:~:~:4'[[[[[[[[[[[+++++,[%_]4{1<<<2:_]            ",
-"           !-:::::~::!4@(}[[[[[[[[[[[[[[[$]{::::::::::::::::(|[[[[[[[[,++,,,[$/4]@312<<<<<~-]            ",
-"          {-<~:~::::~::{|@@#>=[[[[[[[[[[[%]~:::::~::~:~:::::-][[[[[[[,[[;;%/_]]|!~1<<<<<<<11]]           ",
-"          !(~::::::::::::~!|@@4(*>=[[[[[['|:~:~:::~:::::::~:1]}[[[[[$%*#4@]]|-1~2<<<<{<<<<2:4]           ",
-"          --:::::~:::~:::::::2-(4@]@4|'#/@({<111)::::::~2)1<{@_/#'_@]]]4'-2~:22<<<<<<<<<<<<~3.           ",
-"         !-{::~::~:::~::~:::::::::){!((|_@@]]]]]]]]]]]]]]]]]]]@4||(-{1~::~22<<<<<<<<<<<<<<<11]]          ",
-"         -3~:::::::::::::::~::~::~~~)~~::::~:1112{<{<{<{)11~:::~::::~)12<<<<<<<<<<<{<<<{<<<2:@.          ",
-"         !3:::::::~::~::~:::::::::::~1<<<2111)~~~:~::::::~:~~~~111<<2<<<<<<<<<<<<<<<<<<<<<<<:(]          ",
-"         -{:~:~::~:::::::::~::~::::::::12<<<<<<<2<<<<<2<<<<<<<<<<<<<<<<<<<<<<<<{<<<<<<<<<<<<1{]          ",
-"        -32::::::::~:::~:::::::~:::::::::~2<<<<2{<<<<2{2{<<<<<<<<<<<<<<<<<<{<<<<<<<<<<<<<{<<1~]]         ",
-"        -(:::::~:::::~::::~::::::~:~:~:::::~1<<<<<<<<{2<2<<<<<<<<<<<{<<<<<<<<<<<<<<{<<{<<<<<<~_.         ",
-"        --::~::~::::::~:::::~::::::::::~:::::~1<2{<<2<2{<<<<<<<{<<<<<<{<<<<<<<<<<<<<<<<<<<<<<~3]         ",
-"       !3{:::::::~:::::::~::::~::~::::::::::::::122<<<<<<<<<<<<<<<<<<<<<<<<<<<<<{<<<<<<<<<<<21{].        ",
-"       -32::::::::~::~:::::~::::::::~::::~:~::::::)<<<<<<<<<{<<<<<<<<<<<<<<<{<<<<<<<<<<<{<<<<2:]]        ",
-"       -3:::~::~::::::::~:::::~::::::~:~:::::~::~::~)<<<{<<<<<<<{<<<<<<<<<<<<<<<<<<<<<<<<<<<<<~_.        ",
-"       -3::::::::::~::::~::~::::~:~::::::::~::::::::::)<<<<<<<<<<<<<{<<{<<<<<<<<<<<{<<<<<<<<<<~(]        ",
-"       3{:~:::~::~:::~:::::::::::::~::~::::::~::::::::::1<<<<<<<<<<<<<<<<<<<{<<<<<<<<<{<<<{<<<1{]        ",
-"      -32:::~::::::::::::~:::~::~::::::::~:::::~:~:~::::::1<<<<<{<<<<<<<{<<<<<<<<<<<<<<<<<<<<<2~].       ",
-"      -(::::::~::~:::~::::::::::::::~:~:::~:::::::::~:~:~:~~1<<<<<<<<<<<<<<<<<{<<<<<<<<<<<<<<<<~4.       ",
-"      33::~::::::~:::~::~::~:~:::~::::::::::~::::::::::::::::~2<<<<<<<<<<{<<<<<<<<<<<<<<<<<<<<<~|]       ",
-"      3!::::~:::::::::::::::::::::::::~:~:::::~:~:~::::::::~:::1<<<<<<<<<<<<<<<<<{<<<<<<<<<<<<<1-.       ",
-"     -3{:::::::~:::~:::~::::::~::~:~::::::::~:::::::~:~:~:::~:::~2<<{<<<<<<<<<<<<<<<{<<{<<{<<<<2<]       ",
-"     -(1:~:::~:::~:::~:::~:~::::::::~::::~::::::::::::::::::::~:::)2<<<<<{<<<{<<<<<<<<<<<<<<<<<<).]      ",
-"     3(:::~:::::::::::::::::::~::~::::~:::::~::~:~::::::~::::::::::~1<<<<<<<<<<<<<<<<<<<<<<{<<<<:@.      ",
-"     33:~::::~:::~:::~:~:::~:::::::::::~:::::::::::~:~::::~:~:::~::::)<<<<<<<<<{<<<<<<<<<<<<<<<<1|]      ",
-"     3-:):::::~:::~:::::::::::~:::~::::::~:::~:::~::::~::::::~::::::::~1<<{<<<<<<<<<<<<<<<<<<{<<13.      ",
-"     3{~~::~::::::::::::~::::::::::~:~::::~::::::::::::::~:::::~::::::::)2<<<<<<<<<{<<<<<<<<<<<<2!.      ",
-"    -(2~~::::::~::~::~::::~:~::~::::::::::::::~::~::::~::::::::::~:~::::::<<<{<<<<<<<<{<<<<<<<<<<2].     ",
-"    3(~1::~::~::::::::~::::::::::~::::~:~:~:::::::~:::::~::~::~::::::~:::::1<<<<{<<<<<<<<<<<<<<<<~].     ",
-"    3(:2:::::::~::~:::::~:~::~:~::::~:::::::~:~::::~::::::::::::~:~::::~::::~<<<<<<<<<<{<<<{<<<<<)@.     ",
-"    33:2::~:::::::::~::::::::::::::::::::::::::::::::~:::~::~::::::::::::~::::2<<<<<<<<<<<<<<<{<<)|.     ",
-"    33~1:::~::~::~:::::::::~::::~:~:~::~::~:::~:~:~:::~::::::~::::~:~:~::::::::1<{<<<<<<<<<<<<<<<2(]     ",
-"    ({11::::::::::::~:~:::::::~:::::::::::::::::::::::::~::::::~:::::::::~:~::~:)<<<<<{<<<<<<<<<<23.     ",
-"    ({1)~::~::~::~:::::::~::~::::::::~::~::~::~::::~:::::~::::::::~::::~:::::::::~<<<<<<<<{<<<<<<2!]     ",
-"   3(22~::::::::::::::~::::::::~::~:::::::::::::~::::~:::::~:~::::::~:::::::~:::::~<<<<<<<<<<<<<<<<.     ",
-"   (()<~~::~::~::~::~:::::~:~:::::::::~::~:~::::::::::::~:::::~:~::::::~::~:::~:::::<<<<<<<{<<{<<<1].    ",
-"   3|:<~::::::::::::::~:~::::~::~:~::::::::::~:~:~::~:::::~:::::::~::::::::::::::::::2<<<<<<<<<<<<)].    ",
-"   3(~<~:~::~::~::~:::::::::::::::::~::~:::::::::::::::~::::::::~:::~:::~:::~:::~:~:::2<<<<<<<<<<<)@.    ",
-"   33~<~:::::::::~::::::::::::~::::::::::~:~:~:~:::~:::::~::~::::::::~::::~::~::::::::~1<<<<<{<<{2)_.    ",
-"   (3)<~:::~::~::::~:~:~:~:~::::::~::~:~::::::::~:::::~:::::::~:~:~::::::::::::::::~::::2<<<<<<<<<1|.    ",
-"   (-1<~:~::::::::::::::::::~::~:::::::::~::::::::~:::::~::~:::::::~::~::::~:~:~:~:::~:::1<<<<<<<<1(.    ",
-"   (!2<~:::~::~:~::~:::~:::::::::::~:::~::::::~::::::~:::::::~::::::::::~::::::::::~:::~::2<<<<<<<1(]    ",
-"   ({2<~::::::::::::~:::~:~::~:~:~::::::::~:::::~::~:::~:::::::~:~::~::::::::~:::::::::::::2<<<<<<13.    ",
-"   ({2<):~::~:::~::::::::::::::::::~:::::::~:~:::::::::::~::~:::::::::~:~:~:::::~:::~:::~:::2<{<<<2!.    ",
-"  3(22<)::::::~:::::::~::::~::::::::~:~:~::::::~:::::~:::::::~::::~::::::::~::~::~::::~::::::2<<<<2{]    ",
-"  (|2<<1:::~::::::~:~::::~:::~:~::::::::::::~:::~:~:::~::~::::::~::::::::::::::::::~::::~::~::2<<<1{.    ",
-"  3|)<<1:~:::~::::::::::::::::::~:~::::::::::::::::::::::::~:~::::~:~:~::~::~::~::::::::::::::~2<<21.    ",
-"  (|)<<2::::::~:~:::~::~:~::::::::::~:~:~:~::~::::~:::::~:::::::~::::::::::::::::::::~::~::~:::~<<12].   ",
-"  (|)<<2::~:::::::::::::::~:~:~::::::::::::~::::~:::~:~:::~:::::::~::~:~::~::~::~:~:::::::::::::~2)2].   ",
-"  (|~<<<::~::~:::~:::~:::::::::::~::::::~::::~::::::::::::::~:~::::::::::::::::::::::~::~:::~::::::~.]   ",
-"  (|:<<<:::::::~:::~::::~::::::::::~:~:::~::::::::~::::~:::::::~:::~:~::~:~:::~::~::::::::~:::~::~::..   ",
-"  ||:<<<):::~::::::::::::::~:~:~:~:::::::::::~:~::::~:::~::~:::::~:::::::::~::::::::~::~:::::::::::~].   ",
-"  (|:2<<1::~::~:~::~:~:::::::::::::~:::::~:~:::::::::::::::::~:::::::~:::::::~::~::::::::~::~::~:::~].   ",
-"  ||:<<<2::::::::::::::~:~:::~:::~::::~::::::::~:~::~::~::~::::~::~::::~::~::::::::~::~:::::::::::::..   ",
-"  ||:2<<2:~::::~::::::::::~::::::::~:::::~::~:::::::::::::::~::::::~::::::::~::~::::::::~::~::~::~::].   ",
-"  ||:2<<2~::~::::~:~:~:~:::::::::::::::~::::::::~::~::~::~:::::~::::::~::~::::::::~::~:::::::::::::)].   ",
-"  |_)1<<{~::::~:::::::::::~:~:~::::~:~::::~::::::::::::::::~:::::~::~::::::~::~::::::::~::~::~::~::2..   ",
-"  ||11<2<1:~:::~:::~::::~::::::::~::::::::::~::~::~::~::~:::::~:::::::::~::::::::~::~::::::::::::::2].   ",
-"  (_<)<<<<:::::::~:::~::::::~:~:::::::~:~:::::::::::::::::~:::::~::::~::::~::~::::::::~::~::~::~:::{.    ",
-"  |_{)<<<<~~::~::::::::::::::::::~:~:::::::~::~::~::~::~:::::~::::~:::::::::::::~::~::::::::::::~::-.    ",
-"   _!~<<{<1:::::~::~::~:~:~:::~:::::~::~:~:::::::::::::::~:::::~::::~::~:~::~::::::::~::~::~:::::::(.    ",
-"   _3:<<<<<~:~:::::::::::::::::::::::::::::::~::~::~::~:::::~::::~:::::::::::::~::~::::::::::~:::~:|.    ",
-"   _|:2<<<<~:::~:~::~:::::~:~:::~:~::~:::~::::::::::::::~::::::::::~::~:::~::~::::::~::~:::::::~::~@.    ",
-"   44:1<<<<<::::::::::~:~:::::~:::::::::::::~::~::~::~:::::~:~::~::::::~:::::::::~:::::::~::~:::::~..    ",
-"   442)<<<<<):::~:~::::::::::::::::~:~:~:::::::::::::::~::::::::::~::::::~::::~::::~::~:::::::::::{.     ",
-"    @!~<<<<<2~:::::~::~::::~::~:~:::::::~::~::~::~::~:::~:::~::~:::~:::::::~::::::::::::~::~::~:::(.     ",
-"    4(:<<<<<<~:::::::::~:::::::::::::~::::::::::::::::::::~::::::::::~:~:::::~::~:~:::::::::::::~:_.     ",
-"    @4~1<{<<<2~:~::~:::::~:~:::::~::::::~::~::~::~::~:::::::~::~::::::::::~:::::::::~::~::~::~:::)].     ",
-"    @@<~<2<<<<)::::::~::::::~::~::::::::::::::::::::::~:~::::::::~:~::~:::::~::~:::::::::::::::::-.      ",
-"     @(:<<<<<<<~::~::::~::::::::::~:~:~:::~::~::~::~::::::::::~::::::::::~::::::~::~::~::~::~::~:|.      ",
-"     @4:2<<{<<<2::::~:::::~::~:::::::::::::::::::::::~:::~:~::::~:::~::~:::~::::::::::::::::::::~].      ",
-"     ]@{)<2<<<<<)~::::::~:::::::~:~::~:~::~:~::~::~:::~::::::::::~::::::::::~:::::~::~::~::~::~:-.       ",
-"      ](:<<<<<<<<~::~:~::::~::~:::::::::::::::::::::::::~:::~:~::::~::::~:::::~:~:::::::::::::::4.       ",
-"      ]])){<2{<<<2~:::::~::::::::::~:::~::::~::~::~::::::~:::::::::::~::::::::::::::~::~::~::~:<..       ",
-"      @]3:<<<<<<<<<:::::::::~:::::::~::::~::::::::::~:~::::~:::~::~::::~::~:~::::~:::::::::::::|.        ",
-"       ]@:2<<2{<<<<<~:::~:~::::~:~:::~::::::::~::~::::::::::::::::::::::::::::~:::::::~::~::~:1].        ",
-"       @]3:<{2<<<<<<<~:::::::~::::::::::~::~:::::::~:::~::~::~::~::~:~::~:::::::~::~:::::::::~(.         ",
-"        ]@~1<<<2{<<<<2~:::~:::::::~::~:::::::~::~:::::::::::::::::::::::::~::~::::::::~::~:::1..         ",
-"        @]3:<<<<<<<<{2<1:::~::~::::::::~::::::::::~::~::~::~::~::~::::~::::::::~::~::::::::~:|.          ",
-"         ]]11<<<<<<<<<<<1:::::::~:~::::::~::~::~:::::::::::::::::::~:::::~::~::::::::~::~:::<..          ",
-"          ](~2<{2<<<<<<<<<~:~:::::~::~:::::::::::~::~::~::~::~::~::::~::::::::~::~::::::::::_.           ",
-"          ]]{~<<<<<<<<<<{<<1~:::::::::::~::~::~:::::::::::::::::::::::::~::~::::::~::~::~::-..           ",
-"           ]4~1<<{<<<<<<<<<<<1~::~:~::::::::::::~::~::~::~::~::~::~:~::::::::~::::::::::::2].            ",
-"           ]](:2<<<{<<<<<<<<<<<1~:::~::~::~::~:::::::::::::::::::::::::~::~:::::~:::~::~:~|.             ",
-"            ]]{~2<<<<<<<<<<<<<<<<2)::::::::::::~::~::~::~::~::~::~:::~::::::~:::::~::::::3..             ",
-"             ]]1~<<<<<<<<<<<<<<<<<<<2)~::~::~:::::::::::::::::::::~::::::~:::::~::::~:::<].              ",
-"              ]4~)<{<<<<<<<<<<<<<<<<<<<<1~~:::~::~::~::~::~::~::::::::~::::~::::::::::~)@.               ",
-"              ]]|:1<<<<{<{<<<<<<<<<<<<<<<<<221)1~~~:::::::::::~::::~::::~::::~::~:::~::4.                ",
-"               ]](:1<<<<<<<{<{<<<<<<<<<<<<<<<<<<2<<<<221~~::::::~:::::::::::::::::~::~|..                ",
-"                ]]3:1<<<<<<<<<<{<<<<<<<<<<<<<<<<<<<<<<<<2<1)::::::~:~::~:~::~::~::::~3..                 ",
-"                 ]]3:)<<<<<<<<<<<<{<<<<<{<<<<<<<<<<<<<<<<<<<21:~::::::::::::::::::::3..                  ",
-"                  ]]3:~2<<<<<<<<<<<<{<<<2{<<<<<<<<<<<<<<<<<<<<1:::::~:::~::~::~:~::(..                   ",
-"                   ]](:~1<<<<<<<<<<<<<<<<<<<{<<{<<{<<<<<<<<<<<<<):~:::~::::::::::~(..                    ",
-"                    .]|~:)<<<<<<<<<<<{<<<<<<<<<<<<<<<<<<<<<<<{<<<~:::::::~::~:::~|..                     ",
-"                     ].42:~2<<<<<<<<<<<<<<<<<<<<<<<<{<<{<<<<<<<<<<~:::::::::::~14..                      ",
-"                      ]]@!::~2{<<<<<<<<<{<<<<<<<<<<<<<<<<<<<<<<<<<2::~:~::~:::{].                        ",
-"                        .]()::)2<{<<<<<<<<<<{<<<<{<<<<<<<{<<<<<<<<<~::::::::)3..                         ",
-"                         ..@{:::)2<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<)::::~::{4..                          ",
-"                           ..|2:::~1<<<<<{<<<<<<<<<<<{<<<<<<<{<<<<<):~:::)(..                            ",
-"                            ].](1~::~12<<<<<<<<<<<<<<<<<<{<<<<<<<<<~:::~3]..                             ",
-"                              ..](2::::~)1<<<{<<<{<<<<<<<<<<<<<{<<1::)3@..                               ",
-"                                ...|{~:::~:))2<<<<<<<<<<<<<<<<<<<1:2(]..                                 ",
-"                                  ...@({:::::::~)12<<<{<<<<{<<1)134...                                   ",
-"                                    ....]|3<~~:::::::::~~)~~1!(4....                                     ",
-"                                       .....]@|((-!{{{!33|_].....                                        ",
-"                                           ..................                                            ",
-"                                                                                                         ",
-"                                                                                                         ",
-"                                                                                                         "};
diff --git a/perl-install/pixmaps/mouse_3b.xpm b/perl-install/pixmaps/mouse_3b.xpm
deleted file mode 100644
index 4c8a3bd9a..000000000
--- a/perl-install/pixmaps/mouse_3b.xpm
+++ /dev/null
@@ -1,386 +0,0 @@
-/* XPM */
-static char * mouse_3b_xpm[] = {
-"210 350 33 1",
-" 	c None",
-".	c #0A1630",
-"+	c #FE9A02",
-"@	c #253359",
-"#	c #C99121",
-"$	c #F3AE18",
-"%	c #D6A02C",
-"&	c #96762E",
-"*	c #3E4862",
-"=	c #B68626",
-"-	c #FDB820",
-";	c #FE9E02",
-">	c #E6AA32",
-",	c #A67E2A",
-"'	c #F2B22A",
-")	c #7B84A1",
-"!	c #7C673B",
-"~	c #5C6888",
-"{	c #B79346",
-"]	c #0E1A3A",
-"^	c #F2B22E",
-"/	c #BABEDA",
-"(	c #848CAA",
-"_	c #4A5778",
-":	c #FEA206",
-"<	c #A7A9C8",
-"[	c #757C94",
-"}	c #9A9ABE",
-"|	c #9FA1C0",
-"1	c #11244D",
-"2	c #AFB0CD",
-"3	c #697392",
-"4	c #FEB212",
-"                                                                                                 ~_3}}}]].                                                                                                        ",
-"                                                                                                 ~_)}}}]..                                                                                                        ",
-"                                                                                                 ~_)}}3].                                                                                                         ",
-"                                                                                                 __(}}3].                                                                                                         ",
-"                                                                                                ~~*|}}3]]                                                                                                         ",
-"                                                                                                ~__}}}_].                                                                                                         ",
-"                                                                                                ~~*|}}_].                                                                                                         ",
-"                                                                                                __~}}}*].                                                                                                         ",
-"                                                                                                ~__|}}@].                                                                                                         ",
-"                                                                                                ~~_}}}*].                                                                                                         ",
-"                                                                                                ~_~}}(@].                                                                                                         ",
-"                                                                                                __3}}}@].                                                                                                         ",
-"                                                                                                __3}}}]].                                                                                                         ",
-"                                                                                                __~}}}1].                                                                                                         ",
-"                                                                                                __3}}(]].                                                                                                         ",
-"                                                                                                __~}}}1]]                                                                                                         ",
-"                                                                                                __3}}(]].                                                                                                         ",
-"                                                                                                ~_[}}}1.]                                                                                                         ",
-"                                                                                                __)}}(1..                                                                                                         ",
-"                                                                                                __)}}}]]]                                                                                                         ",
-"                                                                                                _*)}}}]..                                                                                                         ",
-"                                                                                                _*)}}}1]]                                                                                                         ",
-"                                                                                                _*)}}(]].                                                                                                         ",
-"                                                                                                _*~}}}1.]                                                                                                         ",
-"                                                                                                __~}}(1..                                                                                                         ",
-"                                                                                                __3}}}]]]                                                                                                         ",
-"                                                                                                _*~}}}]]]                                                                                                         ",
-"                                                                                                __~}}}@].                                                                                                         ",
-"                                                                                                **3}}}@]]                                                                                                         ",
-"                                                                                                **_}}}*].                                                                                                         ",
-"                                                                                                **_}}}@]]                                                                                                         ",
-"                                                                                                ___}}}*1]                                                                                                         ",
-"                                                                                                ~_*}}}_1]                                                                                                         ",
-"                                                                                                )3*}}}_111                                                                                                        ",
-"                                                                                                (3*}}})@1@@                                                                                                       ",
-"                                                                                               |(~[}}}}}*@@@                                                                                                      ",
-"                                                                                              }(~)}}}}}}}_*@@                                                                                                     ",
-"                                                                                             [)~)|}}}}}}}}_@11                                                                                                    ",
-"                                                                                             ~_~|}}}}}}}}}}~]1                                                                                                    ",
-"                                                                                             __*}}}}}}}}}}}}1]]                                                                                                   ",
-"                                                                                             ***}}}}}}}(}}}}@1]                                                                                                   ",
-"                                                                                             _**}}}}}}}}}}}}*]]                                                                                                   ",
-"                                                                                             ***}}}(}}}}}}}}_1]                                                                                                   ",
-"                                                                                              **[}}}}}}}}}}}[]]                                                                                                   ",
-"                                                                                              **)}}}}}}}}}}}(]]]                                                                                                  ",
-"                                                                                              _*)}}}}}}}}}}}}1]]                                                                                                  ",
-"                                                                                              _*3}}}(}}}}}}}}@1]                                                                                                  ",
-"                                                                                              **~}}}}}}(}}}}}_]]                                                                                                  ",
-"                                                                                              __~}}}}}}}}}}}}~]]                                                                                                  ",
-"                                                                                              3_~}}}}}}}}}}}}31]                                                                                                  ",
-"                                                                                              )~_[3____**__~~~111                                                                                                 ",
-"                                                                                             <)~@111111111111111*_[)                                                                                              ",
-"                                                                                        2<<||(3*@11111@**11111@@*_3[))))                                                                                          ",
-"                                                                                     2<<||()3[[)(}///////////2}}[33~~333[[[                                                                                       ",
-"                                                                                   2<<}(3)(</////////////////2//////<([~~~3333                                                                                    ",
-"                                                                                2<<}([(|///////2<<|||}}(}}}}}}}}|<22////|)__~~33                                                                                  ",
-"                                                                              22|()~*)///22||}}}}}}}}}}}}(}}}}}}}}}}|2///)@@*__~~~                                                                                ",
-"                                                                            22|([[%_1@//}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}<//@11!!@*__~~                                                                              ",
-"                                                                          22|(3&'--#11[/|}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}2}11@4->!@*___~                                                                            ",
-"                                                                         22([)>-444-@1_/2}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}_11!4444%!@*____                                                                          ",
-"                                                                       22}[[%--4-444!11//}}(}}}}(}}}}}}}}}}}}}(}}}}}}}}}@11#44-444#*@*____                                                                        ",
-"                                                                      2|(3{--444444$,11(/2}}}}}}}}}}}}}}}}}}}}|(}}}}}}}(111444444-4-=@@**_*                                                                       ",
-"                                                                    22}[['-444$::444%11[/2}}}}}}}}(}}(}}}}}}}}}}}}(}}}}[11*444444444-$!@@**_                                                                      ",
-"                                                                   2|(3{-444:++++444411_//|}}(}}}}}}}}}(}}}}}}}}}}}}}}}311!444444444444{@@****                                                                    ",
-"                                                                  2|)[$-4$+++++++4444*1*//2}}}}}}}}}}}}}}}}}}}}}}}}}}}<*11=4444-44-4444-$_@@***                                                                   ",
-"                                                                22([,-44;+++++++44444!11///}}}}}}}}}}}}}}}}(}}}}}}(}}}/@11%4-4444444444444&@@*@*                                                                  ",
-"                                                               2<(3{-4;++++++++;44444!11<2/2}}}}}}}}}}}}(}}}}}}(}}}}}}/1114444-444444-444-4{@@@*@                                                                 ",
-"                                                              2|(3>-$+++++++++;4-4444=11}///}(}}}}}}}}}}}}}}}}}}}}}}}<}11@44444-44-444444444%*@@*@@                                                               ",
-"                                                             2|)3'4;++++++++++$444-44#11[///<}}}}(}}(}}}}}}}}}}}}}}}}2}11*44-4444444444444444$*@@*@@                                                              ",
-"                                                            <})&'4;++++++++++$4444444>113///2}}}}}}}}}}}}}}}}}}}}}}}}/311!44444-44-44-444444444_@@@@@                                                             ",
-"                                                           <|[[-$+++++++++++:44444444411~2///}}}}}}}}}}}}(}}}}}}}(}}}/~11!444-444444444444444444!1@*@@                                                            ",
-"                                                          <}[&-$+++++++++++:444-444-44@1*////2}}}}}}}(}}}}}(}}}}}}}}|/_11&-444444-44-44-44-44444'!1@@@1                                                           ",
-"                                                         <}3[-:++++++++++++444444-4444*1*//2//}}}(}}}}}}}}}}}}(}}}}}</*11#4444-4444444444444-4444-!1@@@1                                                          ",
-"                                                        <}[&-:+++++++++++:4444-4444444*1@////2<}}}}}}}}}}}}}}}}}}}}}</*11#4-4444-44-44-44-4444444$'!1@@11                                                         ",
-"                                                       <|[[-$++++++++++++4444444444444!11//////}}}}}}}(}}}}}}}}}}}}}2/@11$444-4444444444444-44-44444_1@@11                                                        ",
-"                                                      <})&-:++++++++++++44-444-44444-4&1]////2/|}}}}}}}}}}}}}}}}}}}}2/111444444444-44-44-444444444444!1@@11                                                       ",
-"                                                     <|)3'$++++++++++++$4444-444-44444!11/2////2}}}(}}}}}}}}}}}}}}}}2/11144-444-4444444444-44444444444*1@@1                                                       ",
-"                                                     |(~'4++++++++++++4444444444444444=11}//////|}}}}}}}}(}}(}}(}}}}//11@444-4444-44-44-4444-444444444$*1@11                                                      ",
-"                                                    |(3%4++++++++++++$4444-444-44-4444#11}2/////2}}}}}(}}}}}}}}}}}}}/|11*-4444-444444444444444-44-44444$@1@11                                                     ",
-"                                                   <(~%-++++++++++++444-444-444444444-=11}///2///}}}}}}}}}}}}}}}}}}}/}11*444444444-44-44-44-444444444444#@1111                                                    ",
-"                                                  |}[=-;+++++++++++:444444444-4444444-#11(/////2/2}}}}}}}}}}}}}}}}}}2}11*44-4444-444444444444-4444-444444,1@111                                                   ",
-"                                                 |}[[-:+++++++++++$4444-44-44444-44444>11(/2//////}}}}}}}}}}(}}}}}}|/}11_4444-444444-44-44-4444-444444444-!1111                                                   ",
-"                                                 |)3'4+++++++++++:4444444444-44444-4444113///2///2<}}}}(}}}}}}}(}}}|/}11&444444-44-444444444-4444444444444-*1@]1                                                  ",
-"                                                |(3%-+++++++++++$444-4444-44444-444444^11~////////2}}}}}}}}}}}}}}}}}/(1]&444-444444444-44-444444-4444-44444:@1111                                                 ",
-"                                               |}~{4:++++++++++:444444-4444-44444444444113////2////<}}}}}}}}}}}}}}}|/311!44444-44-44-444444-44-444-4444-4444=1@111                                                ",
-"                                              ||[[-:++++++++++44444-44444444-44-4444-4^11~/2///////2}}}}}}}(}}}}}}}|2311&44-444444444444-44444444444444444-44!1111                                                ",
-"                                              })~44++++++++++;4444444-44-44444444-44444113//////////<}}(}}}}}}}(}}}|/311!-444-44-44-44-444-44-44-44-444444444-*1111                                               ",
-"                                             |(~%-;+++++++++$44-44-444444-4444-44444444*1~///2/2////2}}}}}}}}}}}}}}|/311&444444444444444444444444444-444444444%111]1                                              ",
-"                                            |}[,-:+++++++++;-4444444-444444-44444444444*1_/2//////2//<}}}}}}}}}}}}}|/~11=444-44-44-44-44-444-44-444444444$44444&1111                                              ",
-"                                            })~'4+++++++++$444444-444-44-4444-44-444-44*1*/////2/////2}}}}(}}}}}}}}|/311#-444444444444444-444444-444-44444:44444*11]1                                             ",
-"                                           }(~%';++++++++;4444-44444444444-444444444444*1*////////////<}}}}}}}}}}}}|/3]1#44-44-44-44-444444-444444-44444444;4444%11111                                            ",
-"                                          }}[)4$++++++++:44444444-44-44-44444-44-444444*1*/2/////2////2}}}}}(}}}}}}|2311#444444444444-44-444-44-4444-444444::4444&111]                                            ",
-"                                          })~44++++++++;-444-44444444444444-44444444444*1*///2/////////<}}}}}}}(}}}|/311#444-444-444444444444444444444444444;$444-*1111                                           ",
-"                                         |(3{-:+++++++:444444-44-444-444-44444-44-44444*1*///////2/2///2}}}}}}}}}}}}/311#-444-4444-44444-444-444-444-4444444:+4444#111]1                                          ",
-"                                         }[344+++++++;4444-4444444-444-444444444444-444*1*/2//2/////////<}}}}}}}}}}}2_11#44444444444-44444-444-444-444-4444-4;;444-!111]                                          ",
-"                                        })~>-;++++++:4444444444-4444444444-44-44-444444*1*/////////2////2}}}(}}}}}}}/*11#4-444-44-44444-4444444444444444-44444+;444>@1111                                         ",
-"                                       }(3,-4++++++;-444-444-4444-44-444-44444444444444*1*/2////////2////2}}}}}}}}}}/*11#444-444444-4444444-444-444-4444444444;+:444&111]                                         ",
-"                                       })3'4++++++:44-444-4444-444444-444444-44-44-4444*1*////2/2/////////|}}}}}}}}}/*11#4444444-4444-44-444-444-4444-44-44444:++444-@1111                                        ",
-"                                      }(3{44++++++444444444-4444-444444-44-444444444444*1*//2////////2///2/}}(}}}}}}/*11#44-44-444-444444444444444-444444444444+++444#111]                                        ",
-"                                      ([3-4+++++;4444-44-44444444-44-4444444-44-44-4444*1*////////2///2////<}}}}}(}}/*11#444444444444-44-444-44-44444-44-44444-:++;444*1111                                       ",
-"                                     }(~%4$+++++4444444444-44-44444444-4444444444444-44*1*///2/2//////////2/}}}}}}}|/*11#444-444-444444444-44444444-444444-44444+++$44;111]1                                      ",
-"                                     ([344+++++44444444-44444444444-4444-44-44-44-44444*1*2////////////2////2}}}}}}}/*11#-444-444-44-44-4444-444-444444-44444444++++4-$!111]                                      ",
-"                                    })~$4$++++4444-44-444-44-44-44444444444444444444444*1_2///2//2/2/////////<}}}}}</~11#444444444444444444444-444-44-444-444444:++++44%1111]                                     ",
-"                                    (3&44++++$44444444444444444444-44-44-444-44-44-4444*1*/2////////////2/////|}}}}2/311#-444-4444-44-44-44-44444444444444-4444-:++++:44!11]1                                     ",
-"                                   })~>-:+++:4444-4444-444-44-44-444444444-444444444-44*1*///2//2///2/////2////<}}|//~11#444444-4444444444444-44-444-44-4444-4444+++++44$@11]1                                    ",
-"                                   ([[-4;++$44-4444-444-444444444444-44-444444-44-4444411~///////2///2///////2//22///311#-44-4444-44-44-44-444444-444444444444444+++++;44!111]                                    ",
-"                                  })~>44++;44444-44444444-44-4444-4444444-44-4444444444113/2//2////////2///2///////2/311,44444-4444444444444-444444-44-44-4444444;+++++:4$@111]                                   ",
-"                                  ([&-4++:444444444-44-4444444-4444-44-4444444-44-444--113///////2//////2////2///////311!44-4444444-44-44-444-44-4444444444444444:++++++44&11]1                                   ",
-"                                 })~>-4+;444-4444-444444-44-4444-4444444-4444444444-4441132////////2/2/////////2////2311&4444-44-44444444444444444-44-44-44-44444:++++++;4>@11]]                                  ",
-"                                 ([&-4:+444444-444444-4444444-4444444-4444-44-44-444444113///2//2////////2///////2///}11!4444444444-44-444-4444-444444444444-4444:+++++++:4!1111                                  ",
-"                                ()~>'4+$444-4444-44-444-4444444-44-444444444444444444-#11[/2/////2////2////2/////////(11&444-44-44444444-444-4444-44-44-444444444:++++++++4%111]                                  ",
-"                                (3[-4::444444-44444444444-44-444444444-44-444-44-44444#11}/////////2////////2/2///2//}11!444444444-44-444444444444444444-444-444-:+++++++;:4!111]                                 ",
-"                               ((~#-4:444-44444-4444-444444444-44-44-444444-444444-444#11(///2/////////2////////2///2}11*4444-444444444-44-44-44-44-444444-444-44:+++++++++4%1111                                 ",
-"                               ([3-4$44444-444444-444-44-44-444444444444-444444-444444{11}////2/2///2///2/////////////11*4-444-44-44-444444444444444-44-44444444-++++++++++:4_11]]                                ",
-"                              ((~=-4:4444444-4444444444444444-44-44-44-444-44-44444444!11}/2//////2///////2/2/////2///11*4444444444444-44-44-44-444444444-44-4444+++++++++++4#111]                                ",
-"                              ([~-4444-444444-444-44-44-44-444444444444444444444-4444-!11///////////2//////////2////2/1114-44-44-44-4444444444444-4444-444444444$+++++++++++:4*111]                               ",
-"                              (3=44:4444-444444-444444444444-44-44-44-44-44444-444-444!11////2////////2//////2////////*11444444444444-44-44-4444444-4444-4444444:+++++++++++:4,111]                               ",
-"                             ()_{44444444-44-444444-44-44-44444444444444444-444444444-*11/2/////2///////2/2//////2///2*11444-44-44-4444444444-44-4444444444-4444+++++++++++++4#11]1                               ",
-"                             (3*&4444-44444444-44-444444444-44-44-44-44-44444-44-44444*1*/////2///2////////////2///2//*11#4444444444-44-44-4444444-44-444-444444+++++++++++++4,1111]                              ",
-"                            ()~@!44444-4444-444444444-44-44444444444444444-44444444444@1*//2/////////2//////2/////////311#4444-44-4444444444-44-444444-4444-444++++++++++++++$!111]1                              ",
-"                            ([_1@-444444-4444-4444-4444444-44-44-44-44-44444-4444-444411_///////2//////2/2///////2////311,44-444444-44-4444444444-4444444444444++++++++++++++:*1111]]                             ",
-"                            )~_@1%-44-444444444-4444-44-44444444444444444-4444-444444$11~//2/2/////2/////////2/////2//(11&444444-4444444-44-44-4444-444-44-444+++++++++++++++%1111111                             ",
-"                           ([_}11!44444-44-444444-4444444-44-44-44-44-444444444444-44#113////////2///2////2////2//////}11!4444-444-44-4444444444-4444-444444-:++++++++++++++$&111@)1]                             ",
-"                           )33/*]1%44444444-44-4444444-444444444444444-44-44-44-444-4=11(/////2////////2////////////2/<1]*4-44444444444-44-44-4444-4444-44444++++++++++++++;;@111[/11]                            ",
-"                          ()~</}11*44-44-4444444-44-4444-44-44-44-4444444444444444444!11}/2////////2///////2/////2/////11@444-44-444444444444444444444444-44+++++++++++++++4_]11@//_1]                            ",
-"                          )3~///*11&444444444-44444444444444444444-44-44-44-44-44444$!112//2////2///////2///2/2/////2//@11444444444-44-44-44-44-444-44-4444+++++++++++++++4=1111(//|11]                           ",
-"                          )~(///<@11%4444-44444-44-44-444-44-4444444444444444444-4444*11/////2//////2//////////////////*11>4444-44444444444444444-44444444;++++++++++++++4#@111~///2*]]                           ",
-"                         ))_/////(111%-44444-444444444-44444444-4444-44-44-44-44444-4@1*/////////2//////2///////2///2//~11#4-44444-44-44-44-44-444444-444++++++++++++++:4#@111@2/2//311                           ",
-"                         )33//2///[11@=44-4444-44-444444-44-44444-444444444444444444411_2/2///2//////2////2//2/////////[11&444-44444444444444444-44-444$++++++++++++++$4%@]11*2/2}2/<1]]                          ",
-"                         )~}///2///~111&4444444444-44-44444444-4444444-44-44-44-4444#113///2//////2/////////////2///2//}11!444444-44-44-44-44-44444444;+++++++++++++:44&]111*2/2}}<//*1]                          ",
-"                        )[_/////////)111*>444-444444444-44-44444-44-4444444444444444,11(///////2/////2//2/////2///////2<11*44-44444444444444444-4444$++++++++++++++$4:_1111_2/|}}}|//)1]                          ",
-"                        )3[/////2//2/}@111&444-44-44-44444444-4444444-44-44-44-444-4!11}////2/////2////////2/////2//////@1@44444-44-44-44-44-444444:++++++++++++;444&@11113/2|}}}}}2/211]                         ",
-"                       ))_<//2///////22_111@,444444444-44-44444-44-4444444444444-44-*11//2////////////2////////////2////*11>444444444444444444-44;++++++++++++;444#@1]11@}22}}}}}}}<//*1]                         ",
-"                       )3~//////2///////(@111@,4-44-44444444-4444444444-44-44-444444@1*//////2//2//2////2//2//2/////2/2/~11=-44-444-444-44-444$:+++++++++++;4444,@1111@3/2|}}}}}}}}}//(1]                         ",
-"                       )3[////////2//////23@111@!%444-44-44444-44-44-44444444444444%]1_///2///2//////2//////////2///////[11&44444-444-444444$+++++++++++:$444%!@11111_</2|}}}}}}(}}}2//11]                        ",
-"                      )[_<///2/////////////23@1111*&>444444-44444444444-44-44-44444,11)2/////////2/////////2////////////|1]*44-44444444444;+++++++;;:444-4:,*111111_</2}}}}}}}}}}}}}<//_]]                        ",
-"                      )3~//2///2///2//2//////2)@11111*&%44444-44-44-44444444444-444!11<///2////2//2//2/2/////2///2//2////@1@4444-44-44$;+++++;::$44-444#&*111111@3//2|}}}}}}}}}}}}}}}//(1]                        ",
-"                      )~[///////2//////2//2/////|_11111]@!,%4444444444-44-44-44444$*1@//////2///////////2/////2///////2//*11%44444$:;+;:::$44444444%,!@1111111~(//2|}}}}}}}(}}}}}}}}}2//11]                       ",
-"                     ))~<////2//////2///////2//////(_@1111]1@*&=%4-444444444444444%11_//2/////////2///////2///////2//////311&444$:444444444444$#!_@]111111@_)2//<|}}}}}}}}}}}}}}}(}}}<//*1]                       ",
-"                     [3_//2//////2/////2/////2////////|3*11111111@*!&#>4-44-44-444,11(////2//2/2//////2////////2//////2//|1]*44444444444%#&!*@111]11111*~}////2}}}}}}}}(}}}}}}}}}}}}}}//)1]                       ",
-"                     )3)//////////////////2////2//////////}3_11111111111@*!!,##$44*1@/2///////////2////2///2///////2//////@11%44##,!!**111111111111*3(2////2|}}}}}}}}}}}}}}}}}}}}}}}}}2/21]]                      ",
-"                     [_|///2//2////2///2//////////2/2/2//2////2(3**111111111111111111_~3~~(}(}(}(|//2///2//////|(}(}(}(3~3*11111111111111111]@*3)|//////2|}}}}}}}}}}}}}}}}}}(}}}}}}}}}<//*1]                      ",
-"                    )3_/////////2////////////2/////////////2//////2/}}3~**111111111111111111111111111111111111111111111111111111111111@*_~)}2////////<||}}}}}}}}}}}}}}}}(}}}}}}}}}(}}}}/2[1]                      ",
-"                    )33////2///////2///2//2////2////////////////////////////(}(33_***111111111111111111111111111111111111111***~~3}}<2///////////2<|}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}2/<]1]                     ",
-"                    [~}//2///2///////2///////////2/2//2/2///2//2////<<22/2///////////////2}}}}}}}3333333~3~3~333(}}}(}}|//////////2///////2/22<|}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}2//@]]                     ",
-"                   )3_////////2/2//////2////2////////////2///////2////2|}|<<22/2///////////2/2/2///////////////////////////////////2///22<<|}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}//~1]                     ",
-"                   )33/////2//////2//////2////2/////2///////2//////2////2<}}}}}}||<<22///////////2/2//2//////2///2///2//2////2//2222||}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}(}}}(}}}}(}}}}}}}}2/(1]                     ",
-"                   3~)//2////////////////////////2///////2////2///////2////<}}}}}}}}}}(}(|||<<<<222222////2///////222222<<<|||}}|}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}2//@1]                    ",
-"                  )[_2///////2//2///2//2///2///2/////2//////////2///2////2///2<}}}}}}}}}}}}}}}}}|}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}|//*]]                    ",
-"                  [3~////2///////2//////2///2/////2////////2//////////2////2///2<}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}(}}(}}}}}}(}}}}}}}}}}}}//[1]                    ",
-"                  [~)//2///2/////////2////////////////2/2////2///2///////////2////<|}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}(}}}}}}}}}}}(}}}}}}}}}}}(}}}}2/|1]]                   ",
-"                  [~(////////2////2/////2///2//2///2//////////2////////2////////////2|}}}}(}}}}}}}}}}}}}}(}}}}(}}}}}}}}}}}}}}}}}}}}(}}}(}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}<//@1]                   ",
-"                 [3_/////2/////2/////////////////2///////2////////2//////2////////////2<}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}(}}}}}(}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}//_1]                   ",
-"                 [33//2////////////2////2///2//////2//2///2////2////2/////2//2/2/////////2}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}(}}}}}}}}}(}}}}}}}}(}}}}(}}}}(}}}}}}}}}}2/(]]                   ",
-"                 3~)//////2//2///////2////////2/////////////2/////////2//////////2/////////2|}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}2/21]]                  ",
-"                 [_<///2////////2////////2////////////2////////2/2////////2////////2/2/2//2//2|}}}}}}}(}}(}}}(}}}}}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}|//@1]                  ",
-"                [3_///////2///2///2///2////2///2/2//2///2//////////2///2////2//2///////////////2|}}}}}}}}}}}}}}}(}}}(}}}}}}(}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}(}}}}}}}}}}}}//~1]                  ",
-"                333////2////////////////////2////////////2//2///////2////////////2/////2/////////2<}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}(}}}}(}}}}}}}}}}(}}}}}}}}}}(}}}}}}}}}}(}}}}}2/)]]                  ",
-"                [~(//2/////2////2///2///2/////////2///2///////2//2///////2///2///////////2/2///////2<}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}</21]]                 ",
-"                3_|/////2////2///////2//////2//2//////////2///////////2//////////2//2///////2/////////<}(}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}(}}}|//@1]                 ",
-"               [3~///////////////2///////2//////////2///////2//2///2//////2///2////////2////////////////<}}}}}}(}}}}}}}}}(}}}}}}(}}}}}}}}}}}}}}}}}}}}(}}}}}(}}}}}}}}}}}}}}(}}}}(}}}}}}}}}}}}//~]]                 ",
-"               [~3///2//2/2///2///////2/////2////2/////2///////////////2////2////2//2////////2/2//2/2/////<}}}}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}}}}2/)1]                 ",
-"               3~(//////////2/////2///////////2//////////2///2///2///2//////////////////2/2///////////2////2<}}}}}}}}}}}}}}}(}}}}}}}}}}}}}(}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}(}</|1]]                ",
-"               3_|2/2/2////////2///2////2/////////2/2/////2///2////////2//2/2/2//2///2/////2///2////////2/////|}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|//@]]                ",
-"              [3_///////2////2///////2////2/2///2/////2///////////2//////////////////////////////2//2/////////22|}}}}(}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}(}}}}}}}(}}}}(}}}(}}}}}}}}}}}}}}}}}(}}}}}2/_1]                ",
-"              33~/////////2////2//////////////////////////2////2/////////2////2///2//2/2////2/////////////2//////2}}}}}}}}}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}(}}}}}}}}}}}}}2/3]]                ",
-"              3~)//2/2///////////2///2//2////2////2////2/////2/////2/2///////////////////2////2///2///2/2///2//////2|}}}}}}}}(}}}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}</}1]                ",
-"              3_}//////2/2/2/2/////2//////2////2////2/////2//////2//////2//2///2//2////////////2/////////////////////<}}(}}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}(}}}}(}}}}(}}}}}}}}}}}}}}}}}}}}}}|//1]]               ",
-"             [3_/////////////////2////2////////////////////////2///2//2///////////////2//2/2///////2//////2///2/////2//<}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}2/*]]               ",
-"             3~~/2/2/2////////2///////////2//2/2//2/2//2////2//////////////2///2///2////////////2//////2/////////2//////2<(}}}}}}}}(}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}(}}}}22~1]               ",
-"             3~3///////2/2/2/////2/2//2/////////2////////2/////2///2///2///////////////2//2//2//////2//////2//2///////////2|}}}(}}}}}}}}(}}}}}}}}}}}}}(}}}}}}(}}}}(}}}}}}}}}}}(}}}}}}(}}}}}}}}</[]]               ",
-"             3~(///////////////2////////2//2/////////2//////////////////////2///2///2////////////2//////2/////////2/2/2/////<}}}}}}}}}}}}}}}}}{}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}|/|1]               ",
-"             3_|////2//////2//////2/////////2///2/2////2/2/2/2/2/2/2/2/2/2///////2////////2///2//////2/////2////2////////2////<}}}}}}}}{}}}}(}}}(}}}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}//1]]              ",
-"            33_//2/////2//////2/////2/2//2//////////2////////////////////////2//////2/2///////////2/////2///2/////////2/////2//2}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}2/*]]              ",
-"            33~/////2////2/2/////////////////2///////////2////////////////2////////////2/2/2///2//////2//////2/////2/////2///////<}}}}}}}(}}}}}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}}(}}}}}}}}}}</~1]              ",
-"            3~3//2//////////////2/2////2//2////2/2//2/2////2///////////2/////2/2/2//////////2//////2////2/////////////2//////2////2<(}}}}}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}</(]]              ",
-"            3~(//////2//////2///////2///////////////////////2/2/2/2/2///////////////////////////2/////////2//2//2/////////2/////////2|}}}}}}}}}}}{}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}/}1]              ",
-"            ~_}///2////2//2////////////2//2/2/////////2/2///////////////2/2//////2/2//2//2///2/////2//////////////2////2/////2/2/2///2<}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}(}}}}}}}}}(}}}}}}}}}}}}}}2/]]]             ",
-"           33_//////////////2/2/2///////////////2/2//////////////////2/////////////////////2/////////2//2///2///////2//////////////////2|}}}}}}(}}(}}}}}}{}}}}}}}}}}}(}}}}}}(}}}}}}}(}}}}}}}}}}}2/*]]             ",
-"           3~~/2/2//2//2//////////2/2///////2/2/////////2//2/2/2//2///////2/2/2/////2/2/////////2////////2/////2////////2/2///////2//////|}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}</_1]             ",
-"           3~3//22///////2////////////2/2//////////2//////////////////2////////2////////2//2/2////2///2////2////2//2/////////2/2////2/2///2|}}}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}|/3]]             ",
-"           ~~)//<///2///////2//2/////////////////2///2/////////2///2//////////////2////////////////2////////2////////2/////////////////2///2<}}}}}}}}}}}}}}}(}}}}}}}}}}(}}}}}}}}}(}}}}}}}}}}}}}}}/(1]             ",
-"           3_|//<//////2//////////2/2////2/2/2/////////2/2/////////////2/2/2///2//////2//2//2/2/2////////2///////2/////2/2///////2///////////2|}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}(}}}}}/21]]            ",
-"           ~_<//|////////2//2//2///////2////////////////////2////2/2/2////////////2////////////////2//2///////2///////////2/2/2////2////2/////2<}}}}(}}}}}}}{}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}2/1]]            ",
-"          33_//2</2/2////////////////////////2/2/2/2/2////////2/////////////2///////2//2///////////////////2//////2/2////////////////2////2/////2|}}}}}}}}}}}}(}}}(}}}}}(}}}}}}}}(}}}}}}}}}}}}}}}</*]]            ",
-"          ~~~//<2/////2//2//////2///2////2//////////////2/2///////////2//2/////2//////////2/2/2////2////2//////2/////2//////////2////////////2////<}}(}}}(}}}}}}}}}(}}}}}}}}(}}}}}}}}}(}}}}}}}}}}|/~]]            ",
-"          3~)//|2//////////2/2////////2////2///////////////2///2////2///////2///2/2/////////////2////2////2/2///////////2//2/2////2////2///2///2///2}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}(}}|/3]]            ",
-"          ~~(//}///2////////////2/2////////////2/2/2/2///////2///2////2//2///////////2/2/////////////////////////2///2//////////////2///2///////2////|}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}/(1]            ",
-"          ~_|/2}/////2/2/2//////////2///2///2/////////2/////////////////////////////////2/2/2////2////2/2///2//////////////////2///////////////////2//<}}}(}}}}}}}}}}}}}}}}}}}}(}}(}}}}}}}}}}}}}}}221]            ",
-"          ~_</<|/////////////2//////////////////////////2/2////2//2/2//2//2/2/2///2///////////2////2/////2////2//2///2//2/2//2///2//2////2/2///2///2//22}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}22]]]           ",
-"         33_//||/2////////2////2/2///2///2///2//////////////2//////////////////2///2////////2//////////////////////2//////////////////2//////////2///////|}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}(}}}2/*]]           ",
-"         ~~~//|<///2///////////////////2////////2/2//2///////2///2///2//2/////////////2//2//////2////2////2//2///////////2/////2////////////2/////////2///<}}}}{(}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}/_]]           ",
-"         3~3//}<////2/2/2//2//////2//////2/2///////////2///////2//////////2////////2////////2/////2////2///////2/////2/////2/////2/2////2/2///////2/////2//2}}}}}}}}}}}}}(}}}}(}}(}}}}}}}}}}}}}}}}}/~]]           ",
-"         ~~)/2}2/////////////2//2///2/////////2////2/////2/2///////2///2////2/2/2/////2///////2/////////////2///2/2/////////2////////2//////2//2/////////2//2}}}}}}(}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}/[]]           ",
-"         ~_(/<}2/////////2//////////////////////2////2///////2///2////2///2/////////////2/2/////2///2///2/2///////////2//2////2////////////////////2//////////|}}}}}}}}(}}}}}}}}}}}}}}}}}}(}}}}(}}}2(1]           ",
-"         ~_|/|}/2/2/2////////2///////2/2//2/2/////////2//2////////2//////////////2/2/////////2///2///2//////2//////2/////////////2////2/2//2//2/2/////2////2//2<}}}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}22]]           ",
-"        ~3_//}}///////2///2////2/2////////////2//2//////////2//////////2//2//2////////2////////////////////////2//////2////2///////2//////////////2/////2///////2}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}</1]]          ",
-"        ~~_//}(///////2////////////2///2//////////2//2//2////2/2////2//////////2///2/////2/2/2///2///2///2//2//////2////2/////2//2//////////2////////2////////2//2}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}<2*]]          ",
-"        ~~~/2}|/2//2////2//2/2///////////2/2///2//////////////////2////2/2//2//////////////////////////2/////2//2///////////2////////2/2/2////2//2//////2//2//////2|}}}}}}(}}}}}}}}}}}}}}}}(}}}}}}}|/*]]          ",
-"        ~~~/2}|/////////////////2///2///////2//////2//2///2////2////////////////////2/2///////2///2//////2//////////2////2///////2////////////////2///2////////2///2|}}}}}}}}}}}}}(}}}}}}}}}}(}}}}}|/~]]          ",
-"        ~~)/<}|//2//2//2////2//2///2///2///////2//2/////2///////////2////2//2/2/2//////2/2//2///////2//////2//2///2///2///////2////2///////2///2////////////2////////<}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}/~]]          ",
-"        ~_)/|}|//////////2//////////////2//2///////2//////2//2///2////2///////////2////////////2////////////////////////2//2///////////2////2//////2///2/2///////////2<}}}(}}}}}}}}(}}(}}}}}}}(}}}}}/(]]          ",
-"        ~_|/|}<//2//2//2///2///2/2//2////////2//2/////2////////2/////////2//2/////////////2//2///2///2/2///2//2/2//////////////2////2///2/////////////////////2//2/////2}}}}}}}}}}}}}}}}}}}}}}}}}(}}2(1]          ",
-"        ~_}/}}</////////////2/////////2//2////////////////2///////2//2/////////2//2//2////////////2/////2///////////2////2//2////2///////////2//2///2/////2/2///////////2}}}}}}}}}}}}}}(}}}}}}}}}}}}22]]          ",
-"       ~~_//(}<//2//2//2///////2//2//2/////2//2////2////2////2//////////2//2//////////2//////2//////////////2////2////2//////////////2////2//////2////2////////2//2/2////2}}}}}}}}}}}}}}}}}}}}}}}}}}</]]]         ",
-"       ~~*/2}}<//////////2//2//////////2////////////2//////////2////2///////2//2//2/////2/2/////////2////2////2////2/////2////2///2////2////2///////////////2/////////2////}}}}}(}}}}}}}}}}}}}}}}}}}<2@]]         ",
-"       ~~~/2}}<//2///2/////////2//////////2///2//2///////2///////2///////2//////////////////2/2//2////2////////2///////////2///2//////////////2////2///2//2////////////////2|}}}}}}}}(}}}(}}}}}}}}}}</*]]         ",
-"       ~~~/<}}<///////2////2/////2//2//////2//////////2/////2/////////2//////////////2///////////////////2/2////2//2//2/////////////2///2////////2///2//////2//2/2//2///2////|}}}}}}}}}}}}}}}}}(}}}}|2*]]         ",
-"       ~_3/|}}</2//2/////2//////2/////2////////2///2/////2////2//2//2/////2/2/2/2/2///2/2////2////2////////////////////2//2/////2/////2///2//2////////////////////////2/////2/|}}}}}}}}}}}}}}}}}}}}}|/~]]         ",
-"       ~~)/|}}</////////////2////2/////2////2////////2/////////////////2//////////////////2////2///2//2//////2///2/2/////////2////2//////////////////2//2/////////2//////2/////|}(}}}}(}}}}(}}}}}}}}}/~]]         ",
-"       ~_)/}}}<//2///2////2/////////2///////////2///////2//2////2////2/////2/////////////////2//////////2/2//////////2//2//2////////2////2////2/2//2//////2/2/2/////////////////|}}}}}}}}}}}}}}}(}}}}/[]]         ",
-"       ~_|/}}}<///////2//////2///////////2//2////2//2///////2////2//////////2//2//2/2//2////////////2/////////2////2///////////2///////2///2///////////////////////2//2///2//2///|}}}}}}}}}}}}}}}}}}}/(]]         ",
-"       ~_}/}}(<///2/////2///////2////2/////////////////2///////////2///2////////////////2/2//2//2/////2////2////2/////2//////2///2///////////////2///2/2///////2///////2//////////|}}}}(}}}}}}}}}}}}}/(1.         ",
-"       __|2}|}<////2//////2//////2////2//2///2///2///////2////2//////////2//2//2////2////////////2//////2//////////2///2//2/////////2///////2/2/////////2//2////2//2///////2///2///|}}}}}}(}}}}}(}}}}22]]         ",
-"      ~~_//}}}<///////2/////2//////////////2///////2///2////2////2//2/////////2////////////2///////2////////2//////////////2///2//////2/2/////////2//////////2///////////2////////2/|}}}}}}}}}}}}}}(}221]]        ",
-"      ~_*/2(}}<2///2//////////2///2///2///////2///////////////////////2///2//////2////2/2/////2//////2///2///2/2///2//2/2/////////2////////////2////2///2///////////2/2/////2//2/////|}}}}}}}}}}}}}}}2/]].        ",
-"      ~~_/<|}}<////////2//2/////2///////2///////2//2////2////2////2/////2//////2//2////////2/////2///////////////2////////2///2/////2////2/2//////////////2////2/2////////////////////|}}}(}}}}}}}}}}2/@]]        ",
-"      ~_~/<}}}</2///2//////2///////2////////2///////2////2////2////2////////2///////////2/////2//////2///2/////////////////2////2/////2////////2//2////////2///////////2/////2//2//2///}}}}}}}}}}}}}}22*].        ",
-"      ~~~/<}}(</////////2/////2//////2//2/////2////////2/////////////2///2////2///2/2//////2///////2///////2///2///2/2//2//////////2////////2///////2/2///////2////2////2/2////////////2|}}}}}}}}}}}}</*.]        ",
-"      ~_~/<}|}|//2//2///////////2/////////2//////2///////2//2///2/////////2//////////////////2//2/////2/////2///////////////2///2//////2/2//////2//////2///2///2///////////////2////2////}}(}}}(}}}}}<2*].        ",
-"      ~_)/|}}}|///////2///2///////2////2///////2////2/////////2////2//2//////2//2////2/2/2//////////////2///////2/////2///2///2///////////////2//////////////////2//2///////2////2/////2/2|}}}}}}}}}}</~]]        ",
-"      ~_)/|}|(|/2//////////2//2/////2///////2/////////2//2////////////////2///////////////////2/2//2/////////2/////2//////////////2/2//////2/////2/2////2/////////////2//2//////////2/////2}}}}}}}}}}</~].        ",
-"      __)/|}}}|////2///2////////2///////2/////2/2//2////////2///2///2///2////2///2/2//////2//////////2///2///////2/////2///2///2//////2/2////////////2////2//2//2///////////2//2///////////2}}}}}(}}}</~1.        ",
-"      __[/|}}}(/////2//////2/////////2////2//////////2///2//////2//////////////////////2////2///2/////2///2///2/////2///2///2///////////////2////////////////////2//2///2/////////2/////2///<}}}}}}}}</~]]        ",
-"      ~_(/|}}}}//2//////2/////2///2//////////2///2///////////2///////2///2//2/2/////2////////2////2/////////2/////////////////2//2/2/////2///2/2//2////2///2//////////2///2///2/////2////////<}}}}}}}</[]]        ",
-"      __}/|(}}}2////2///2//////2//////2/2/////2///2//2/2//2//////2///2////////////2////2/2////////////2/////////2///2////2//////////2/2//////////////2///2///2////2/////////////////////2//2//<}}}}}}</(].        ",
-"      ~_}/}}}}}2///////////2//////2///////2////////////////////2/////////2///2/2/////////////2//2///////2/////2///////2////2//2/2///////2//2////2///////////////2////////2/2///2/2///2/////////<}}}}}2/(1]        ",
-"      _*|/}|(}}22////2/////////////2///2////2/////2///2//2//2////////2////2/////////2////2/////////2///////2/////2///////////////////2///////2////2//2//////2//////2//2///////////2/////2////2//|}}}}2/(].        ",
-"      __}/}}}}}<///2////2///2/2//////2////2///2/////////////////2//2//////////2//2/////////2/2//2////2///2/////////2///2////2////2////2//2////2////////2/2////2/////////////2///////2/////2//////|}}}2/(1.        ",
-"      __(/}}}}}|////////////////2/2////////////2///2//2//2///2////////2////2////////2/2///////////////2////2//2/////2////2////2///2///////2//////2//2///////////2//2///2/2////2//2///2////////2///2}<//(]]        ",
-"      ~_//(}}}}|////2/2//2////2//////2/////////////////////2/////2///////2///2//////////2////2/2//2/////////////2//////////////////////2////2//2//////////2//////////2/////2///////////2///2////2//////}]]        ",
-"     ~__//}}}|(}2//////////2///////////2//2/2///2/2////2/////2/////2///////////2/2////////2////////////2///2////////2/2///2///2///2/2//////////////2/2/2////2//2//2/////2////2///2//////2//////////2///21]        ",
-"     __*//}(|}}}////2///2/////2/2///2///////////////2////////////2////2///2//2/////2/2////////2//2//2////////2///2//////////2////////////2///2///2///////2/////////2///////////2////2///////2////2/////2]]]       ",
-"     __*//}}}}|(22///2////2/////////////2////2//////////2/2//2////////2////////////////2///2///////////2//////2////////2//////2//////2////2////////////2////2//2/////2///2///////2///////2////2////2///21].       ",
-"     ___//|}}}}}2///////2//////2//2//2/////2///2///2//2///////////2////////2//2///////////////2//////////2/////////2/////2//////2//////2//////2////2//////2//////2/////2///2/2///////2/////////////////21].       ",
-"     __*//<(}}}}|///2///////2/////////////////////////////2////2////////2////////2//2///2////////2//2/////2/////2///2/////////////2////////2////2///2//2/////2////////////////////2///2////2///2////2///].]       ",
-"     __*//|}}}}}|///////2//////2////2/2//2///2//2///2///2////2////2//2//////2/2//////////2/2/2/2//2///2/////2/////////2///2//2//////2//////////////////////////2///2////2//////2////////2////2////////2/]].       ",
-"     __*//|}}}}}}/2//2/////2/////2////////////////////////2//////////////2///////2//2/2//////////////////////2//2//////2///////2////////2///2///2//////2//2/////2////2//////2/////2////////////2/2/////21.]       ",
-"     __*//|}(|}(|2/////2//////////////2///2////2//2//2///////2///2///2///////2//////////////////2//2//2//2////////2////////2/////2///2////2///2///2/2///////2/////2//////2//////////2////2/////////2///21..       ",
-"     __*//|}}}}}}22//////2//2//2///2////////2////////////2////2///////2//2////2//////////////2/////////////////////2////2/////////2///////////////////////////////////2/////2//2//////2////2////////2///]]]       ",
-"     __*//<}}}}(|<///2////////////////2////////2////2/2////2//////2/////////2///2/2//2/2/2///////2/2//2///2//2/2/////2//////2//2//////2/2///2///2////2//2/2///2////2/////////////2///////////2///2////2/]..       ",
-"     __*//<}}}}|(|////////2/////2/2//////2/2////2/////////////2////2/////2/////////////////2///2///////2/////////////////2/////////2//////////////2/////////////2//////2/2///2////2///2/2/////2////////2]]]       ",
-"     __*//<}}}}}}}2///2/////2////////2/////////////////2///2/////////2///////2/////2///////////////2/////2//////2//2///2/////2////////////2///2///////2////2////////2//////////2////2/////2/////////2//21..       ",
-"     _**//2(}}}}}|</////2////2/////////2/////2///2//2///////2///2/////2///2////2//////2/2///2/////////2////2/2////////////2/////2///2//2///////////2////2////2///2////////2///////////////////2//2/////<]].       ",
-"      **</2|}}}(|(<//2/////////2//2//////2/////////////2//////2////2//////////2//////////2///2//2//2/////////////2///2////////2////////////2///2///////////////2/////2//////2/////2///2////2///////////(]]        ",
-"      _*}/2}}}}}}}|///////2//////////2/////2///2//2///////2////////////2///2/////2/2//////////////////2//2////2///2////2///2/////2///2//2///////2////2////2///////2////2///////2////////2/////2///2////(].        ",
-"      **|//}}}}}}(|2//2/////2//2//2/////////////////2//2//////2//2///2////////2/////2/////////2//2////////2//////////////2/////////2////////2/////2////2////2////////////2///2/////2////////////////2//(1.        ",
-"      _*}//(}}}}|(|<////2//////////2////2/2//2//2//////////2/////////////2////2////////2/2/2///////////2//////2///2////////2//2//////2///2////////////////////2///2/2/////2/////2///2///2//2///2///////[].        ",
-"      **3//||(|}}}}|/////////2///////2//////////////2///2/////2///2///2////2//////////////////////2/2////2/2////////2/2/////////2//////2/////2//2///2///2/2/////2/////2//////////////////////2///2/////~].        ",
-"      **3//||}}}}}|(2//2//2/////2//////////2////2////2////2/////////////////////2/2/2//////2/2//2/////////////2////////////2//////////////2//////2///2/////////////////////2////2///2///2///////////2/2~].        ",
-"      **~//|}}}}(|(|2////////2//////2//2/////2//////////////2/2///2///2//2///2///////2/2/////////////2/2////2///2//////2/////2///2//2/////////2////////////2//2///2////2/////2////////2///2////2//////2*..        ",
-"      **_//<(}}|}||(|//2/////////2//////2/////////2/////2//////////2//////2///2///////////////2///2//////2////////2/2/////////2////////2///2/////2///2//2///////////2///2/////////2/////////2////2////2*].        ",
-"      *@_//2|}}}}}(||2///2///2///////2//////2//2////2////////2///////////////////2//////2/2///////////////2//2/////////2//2///////2//////2//////////////////2///2/////////2///2/////////2//////////2//21..        ",
-"      **@///(|(}}}|(}<////2////2//2//////2/////////////2//2///2/2///2//2///2//2////2////////2//2///2//2/////////2///2//////////2////2///////2////2///2///2///2//////2///////2////2/2/2////////2///////<]..        ",
-"       *@<//}}}}}}}|}|///////////////2//////2//2///2/////////////////////////////////2/////////////////////2/2////2///2/2///2/////////2///////2////////2/////////2////2///////2/////////2//2////2/////(].         ",
-"       **(//|}}}}|(}|(2//////2///2/////2/////////////2////2//2///2//2///2//2//2//2///////2//2//2/2/2//2/2//////2//////////2//////2///////2////////2//////2////2////////2/2/2///2//////2////////////2//3].         ",
-"       *@)//|}}}}}}}}|<//2/////2///2/////2//2//2///////2//////////////2////////////2/2////////////////////////////2/////////2//2///2///2///2///2////2/////////////2//////////////2/2/////2///2///2///2_].         ",
-"       *@_//<}}}|(}|(}(///2/2/////////2///////////2/2/////2///2//2//////////2//2///////2/////////////////2//2//2///2/2/2/2//////////2///////2////////////2/2///2/////2//////2/////////2///2///2////2//*].         ",
-"       @@*//2}(|(|}}}||<//////2//2//2///////2//2////////2///2///////2///2////////2////////2//2////2/2///////////////////////2//2/////////2/////2//2///2//////2////2///2/2/////2////2/////////////////2]..         ",
-"       *@@2//|}|}}|(|(|(///////////////2/2///////////////////////2///////2///2//////2///2//////2///////2/2//2//2/////////2///////2///2/////////////2////////////2/////////2/////2/////2/2/2////2///2/}].          ",
-"        @*}//}}}}}}}}}|}2//2///2//2//////////2//2//2/2/////2//2//////2/////2///2//2//2////2//////////////////////2//2/2/////2//////2///2///2///2//////2//2/2//////2/////////2///////////////2////////3].          ",
-"        @@3//<(}}}|(|(|(|///2//////2/2///2/////////////2/////////2////2/////////////////////2///2//2/2///////////////////2////2/2////////2//2/////2//////////2/2/////2/2/////////2/2///////////2////2_].          ",
-"        @@_//<|}}}}}}|}|(//////////////2///2///2///////////2//2//////////2///2//2/////2///////////////////2/2/2////////////////////2/2/////////2////2//2//////////2//////2///2///////2/2/2///////2//2@..          ",
-"        @@@///(}}}}}|(}}|(////2//2///////////////2//2///2//////////2//////2///////2//////2//2/2/2////2//2///////2/2///2//2/2/////2//////2///2////////////2/2///2///////////////2////////////2///////|]..          ",
-"         @@|//|}}}}(|}|}(|2/////////2///2//2//////////2/////2//2/////2////////2/////2//////////////////////////////2/////////2///////2///////2//2/2/2//////////////2///2/2/2//////2/////2/////2///2/3].           ",
-"         @@3//<(}}}}|(}||(|2///2/////2//////2//2//2/////////////2/////2////2/////2/////2/2////////2//2////2//2////////2////////2////////2/2///////////2/////2////2/////////////2//////////2////2///2_].           ",
-"         @@_//<|}}}}}}}}}|}2/2////2/////2/////////////2//2//2//////2///////////2////2//////2///2///////2///////2////////2/2//////2////////////2/////////2/////2/////2///////2/////2/2///////2//////2@..           ",
-"         1@@2//}|(}}|(}|(|(|//////////////2//2////2//////////2/2////////2//2////2/////////////////2///////2//////2/2////////2//////2/2/////2///////2//////////////////////2////////////2/2/////2///}].            ",
-"          @@(//|}}}}}}}}|}|(<//2///2//2////////2//////2/////////////2/////////////2//2///2//2///////2///////2/////////////////2////////2///////2////2/2/2/2/2//2/2///2/2/////2/2////2////////////2/~..            ",
-"          1@_//<}}}|(}|(|(||(///2//////2//2/2//////2////2/2///2//2////2///2///2///////2////////2///////2//////2/////2/2//2//////2//////////2/2///2/////////////////2/////////////2/////////2//////2@..            ",
-"          1@@//2|(|(|}}}}|}(||//////////////////2////////////////////2//////2////2//2/////2/2///2/2/2/////2/////2//////////2/////2/2/2//2////////////////////2//////////2//2/////////2/2/2///2////}]..            ",
-"           1@(//|}|}}}}|(||(|(<///2//2//////2///////2//2/////2///2/////2//////////////2////////////////2//////////2///2//////2//////////////////////////2///////2////2////////2////2///////////2//~].             ",
-"           1@_//<}}}}(|}}}}||(|2///////2//2///2///2//////2/////2/////////2///2//2////2///2/////////////////2/2//////////2/////////////2//2//2/2/2/2/2/////2///////2/////////////2////////2///////2@].             ",
-"           11@///(}}}}}}|(|(||(|///2///////////////////////2////////2/////2///////2/////////2/2/////2///2//////2//2///////2//2/2//////////////////////2//////2///////2/2/2/2//////////2/////2////|]..             ",
-"            1@)//|}}}}(}}}}|}|}(<//////2////2//2///2/2///2///2///2////2///////2//////2//2/2/////2///////////////////2/2//////////2/2//////2/////////////2/////2/2////////////2///2/2////2//2//2//_].              ",
-"            11_//<|(|}}}}|(|(}||(<//2////2//2/////////////////2////////////2/////2////////////////2//2///2//2/////////////2//////////2/2///////2/2/2//////2/////////////////////////////////////2@..              ",
-"            111<//}|}}}}}}}}|}(|||/////////////2/////2///////////2//2///2//////2/////2///2//2/2///////2///////2/2/2////2//////2////////////2////////2/2//////////2/2//2//2/2/2/2////2///2/////2/)..               ",
-"             11~//<(}|(}}}}}}|}}(|(////2////2/////2///2//2/2//2////////////2/////2////2///////////2//////2/////////////////2////2/2////2/2///2////////////2/2//2///////////////////////////2///2*..               ",
-"             11*//<|}}}}}(|(|}(||(||/////2/////2////////////////2////2////////2//////////2////2////////////2///////2/2//////////////////////////////////////////////2//2////////2/2/2/2/2//////}]..               ",
-"             111(//|}}}}}}|(}||(|}|(<2//////2///2/////2////2/////2////2//2/////////2//////2///2///2/2/2/////////////////2//2/2////2/2////////2//2/2//2/2////2////2///////////2/////////////2///~].                ",
-"              11*//<(|}}}}}}}}}|(|}|(////2////////2////////////////////////2////2////2//////////2///////2///2/2/2///////////////////////2/2/////////////2/////2/////////2/2/////////////2////2<1..                ",
-"              111|//}}}}}}}}|(}||(||((<//////2//////2///2/2//2/2//2///2//////2////////2//2//2/////////////2/////////2/2/2////2/2/////2///////2////2////////////////2/2///////2////////////////3].                 ",
-"               11_//<}}}}(|}}}}(|}}|||(2//2////2////////////////////2////2//////2//2///////////2//2//2//////////2///////////////////////////////////2////2//2//2///////////////2/2/2//2/2//2/2@..                 ",
-"               111|//}}}}}}}}||(|(|(}||(</////////2///2///2///2/////////////2////////////2//2//////////2////2/////2///////2////2/2/2//2/2/2//2/2//////2/////////2/////2/2/2/////////////////2[...                 ",
-"                11_//<}}}}(}}}}}|}}|}(||(2//2//2////////////2///2////2////2//////2///2////////2//2//2////2////2/////2//2//////////////////////////2///////2///////2/////////2///////2///2///2@..                  ",
-"                111|//}}}}}}}}}|(}}}|(}||(<///////2//2//2////////2////2///////2////////2///2////////2/////2///////////////2/2//////2//////2////2///////2/////2/////2//////////2/2///////////3...                  ",
-"                 11_//|}}}}(|}(}|}(|}|}(||(2//2//////////////2//////////2///2////2///2////////2//2////2//////2/2/2///2/////////////////////////////2//////2////2/////2//2/2///////2///2///2/@..                   ",
-"                 111|//}}}}}}|}}}}|(}}||(||(|/////2///2///2///2//2/2///////////////////2//2//////2////2//2/////////////2////2/2/2////2/2////2//2/////2/2////2////2/////////////////////2///3...                   ",
-"                  11_//<}}}(|(|}}}}}}}(||(||(<2///////////////////////2///2///2//2///////////2//////////////2////2//2///2////////2///////2///////2////////2////2///2//2////2///2///2/////22@..                    ",
-"                  111(//|}}}}}|(}}}}}|(}|(||(|(<//2//2///2/////2///////2////////////2////2/////////2//2//2///2/////////////2///////2//////2//2/////2///2///2////////////2/////////////////~...                    ",
-"                   11*//<}}}}}}|}}(|}}|}}|}}||}|<//////////2/////2/2//////2///2//2////2//////2//2//////////////2//2//2///2///2///////2/////////2/////2///////2/2///2//2////2/2/2/2//2/2//<1..                     ",
-"                   111)//|}|(|(}}}}}}}}|(|(|(|(}(}/2///2//////2////////////2//////////////2///////2///2//2//2/////////2////////2/2////2/2//2///2//2/////2///////2///////////////////////2_].                      ",
-"                    11@<//}}}}}}}}}(}}}}}}}}|}|||(|<//////2/////2//2//2/////////2//2///2//////2///////////////2///2//////2///2/////2//////////////////2////2///////2//2/2/////////2///2/(1..                      ",
-"                    111~2/<}}}}}}}}}}}}}}|(|(|(}|(|(}/2////2////////////2////2//////2/////2////2///2///2//2///2///2//2////2///2//////2///2//2///2//2////////////2////////2/////2///////2*..                       ",
-"                     111|//|}}(|}}}}}(}}}}}}}}|}}|||(|</////////2///2/////2//////////////////////////2//////////////////2///////2//////2//////2////////2////2///////2//////2//////////23]..                       ",
-"                      11@2/2}}}}}}}}|}|(}}}}|(|(|(}}|(|(<////2///2///2////////2//2///2//2///2////2////////2//2///2///2//////2///2//2//////2////////2////2///2///2////2//2//////2/2/2//<1..                        ",
-"                      111[//<}}(|(|(|(||}}}}}}}}}|}}(|}|}|</////////////2//2//////////////2////2///////2///////////2//////2//////////2//////2///2//////////////////////////2/////////2*..                         ",
-"                       111|//|}}}}}}}|(|(|(}}}}|(}}}|(|(}|(|<//2//2//2/////////2///2//2//////////2//2/////2///2///////2/////2////2//////2////////////2///2///2//2//2///2/////////////)]..                         ",
-"                        11@///}}}}}}}}}}}}|}}}}}}}}}}}}}}}|}}|2///////////2//2///////////2//2////////////////2///2//////2//////2//////2/////2///2//2/////////////////2///2/2/2//2/22<1..                          ",
-"                        111~//2}}}}}}}}}|(}|(}}}}|(}}}}|(|(}}|(|22//2//2////////2//2/////////2///2///2//2//////////2//////////////2/////2////2/////////2///2////2//////////////////2*]..                          ",
-"                         111(//<}}}}}}}}}}}}}}}}}}}}}(|}}}|}}}}}(|<2///////2/////////2////2////////2//////2////2//////2//2//2///2///////////////2///2////2////2////2//2///////////23]..                           ",
-"                          11@<//|}}(}}}}}}}}}|(}}}}|}}}}|(|(}}}|}}|(|<22////2///2/////2///////2////////////2///////2//////////////2//2////2//////2/////////////////////2//2/2/2///(1..                            ",
-"                          111_///|}}}}}}(|}(|(|}}}}}}}}}}}}}}}(|(|(|}}||</////////2////////2/////2///2//2//////2////////2///2//////////2////2///////2//2///2///2////2////////////|@].                             ",
-"                           ]11~2//}}}}}}}}}}|}}|(|(}|(}}}}}}}}}}}}|(|(}}((|<<2/////2////2/////////2////////2////2///2////2////2///2//////////2///2//////////2////2/////2//////2/2_]..                             ",
-"                            ]11(//2}}}}}}}}}}}(|}}}}}|}}}}}(|}}}}}}|}}}}|}}}}||<2/////2////2//2///////2//////////////////////2//////2///2////////////2//2////////////2////2////23]..                              ",
-"                             111(///(}}}}}}}}}}}}}}|(|(}}}|}}}}}}}}}}}}}}}|(|(}}}(|<</////////////2/////2////2////2//2///2/////2/////////2///2////2///////////2///2////////////(]..                               ",
-"                              11*<//<}}}(}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|}(|(}||<22///2//////////2////2/////////////////2///2/////////2///////2//2//2////////2//2///2|1..                                ",
-"                              ]11@///<}}|(}}}}}}}|}}}}|(|(|(}}}}(|(|(}|(}}}}}}}}}}|}|}}}}}}}(}||<<222/2///////////2///2//2//2/////////2///2/////////2//////////2///2///////2/<@]..                                ",
-"                               ]11_///<}}}}}}(}}}}}}}}}}}}}}}}}}|}}}}}}|(|}}}}}(|}(|(|}}}}}}|}}}}}}}(|}}}||<22//////2/////////2///2/////////2///2///////2////////2////2////22*...                                 ",
-"                                ]11_///2}}}}}|(}}}}}}}}}}}}|(}}(}}}}|(}}}}}}}}}}}}}}|(}|(}}}}}}|(}}|}}}}}}}}|(}|<2///////2/////////2////2////////2//2////2//2/////////2////2_...                                  ",
-"                                 ]113///2}}}}}}}}}}(}}}}}}}}}|}}}}}}}}}}}(|(|}}}}}}}}}}}}}}}}}}}|}(|(|(|}(|(|}}}}}}|2//2////2//2//////2/////2/////////////////2////2//////2_]..                                   ",
-"                                  ]113///2}}}}}}}}}}}}}}|(}}}}}}}}}}}}}}}}}}}|(}}}}}}}}}}}}(|(|(}}}}}}}}|}|}}}}}}}}}}}<2////////2///////2////2///2///2///2////////////2//23]..                                    ",
-"                                   ]11[///2|}(}}}}}}}}(}}}}}}(}}}}(}}}}}}}}}(|}}}}(}}}(|(|}|}}}}|}}}}}}}(|}(|(|(|}}(|}}}|2/////////2///////////2///////////2//2//2//////231..                                     ",
-"                                    ]113////<}}(}}}}}}}}}}}}}}}}}}}|(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(|22///2////2////2////////2//2/////////////2///3]..                                      ",
-"                                     ]11[////|}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}}}(|(|}}}}}|}}<//////////2////2////2//////2////2///2///2231..                                       ",
-"                                      .11[2///2}}}}}}}}(}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|}}|(|(|(}|(}}(</2//2/////////2////////////2///////2///3]..                                        ",
-"                                       ]]1_////2|}}}}}}}}}(}}}(}}}}}}(}}}}}(}}}}(}}}(}}}}}}}(}}}}}}(}}}(}}}}}}}}}}}}}}}}}}|}}}}<//////2//2///////2//2/////////2/////<~]..                                         ",
-"                                        ]11_2////<}}}}}}}}}}}}}}}(}}}}}}}}|}(}}}}}}}}|(}}}}}}}(}}}}}}}}}}}}}}(}}}}}}}}}}|(}}}}|(}/2///////////2/////2//2///2///////2_]..                                          ",
-"                                         ]]1@2////<}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}(|}}}}}}}}|/////2//2//2////2//////2////2//2<*]..                                           ",
-"                                          ]11@}2////<}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}|(}}}}}}}}}(/2///////////////2////////////<@]..                                            ",
-"                                           ]]11(/////2|}}}(}}}}}}}}}(}}}(}}}}}(}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}(|}}}}}}}}}}}(|}}}(|}|///2//2//2/2//////2////2//2/(11..                                             ",
-"                                            ]]11~/2////<}}|(}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}|///////////2//////2///////31...                                              ",
-"                                              ]]1*</////2<}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}(}}}}}}}}}}(|}}}}(}}}}}}}}}}}}}}}}(|(|}}}}(|///2/////2///2////////2/<_1...                                               ",
-"                                               ]]11(/2////2}}}}}}}}}(}}}}}}}}}}(}}}}(}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}|}(|//2//2////////2//2///2|@...                                                 ",
-"                                                .]11~///////<|}}(}}}}}}}}}}}}(|}}}}}}}}}}}}(}}}}}}}}}}}(}}}}}(}}}}}}}}}(}}}}}}(|}}}}}}//////////2//2/////2/311..                                                  ",
-"                                                 ].]1@}2//////2|}}}}}}(}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}|}}}}}}}|(}}}}}(<//2///2///////2///<_1...                                                   ",
-"                                                   ]]11~2///////<}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}(}}}}}}}}}(|}}}}}}}}}}(}}}}(|}}}}}}}}}</////////2/////22)@]..                                                     ",
-"                                                    ].]1@(/2//////2|}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}}|(}}}|(|//2//2/////2///<_]...                                                      ",
-"                                                      ]]]1_<2///////2<}}(}}}}}}}}}}}}}(}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|////////////22)1]...                                                       ",
-"                                                       ]]]11~/2////////2|}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}(}}(}}|(}|(|////2///2///(@]...                                                         ",
-"                                                         ]]]1@3/2////////2<|}}}(}}}}}}}}}}}}(}}}}}}}}}(}}}}}}}}}}}(}}}(}}}}}}}|}}}}}}}2/2////2//2|_1]]..                                                          ",
-"                                                           ]]]1@[2//2///////<<|}}}}(}}|(}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|(}}}}}}/////////|~1]...                                                            ",
-"                                                            ].]]1@3/2//////////<<}}|}}}}}}}}}}(|}}}}}}}}}}}}}(}}}}}}}}}}}}}}(}}}}}}}}</2///2/|_11...                                                              ",
-"                                                              .]]]1@[<2//2//2/////2<|}}}}}}}}}}}}}(}}}}}(}}}}}}}}}(}}}}(}}}}}}}}}}}}|///2//(~1]...                                                                ",
-"                                                                ..]]11_|////////////2/<<|}}}}}}}}}}}}}(|}}}}}}}}}}}}}}}}}}}}}}(|(|(2////2(_11...                                                                  ",
-"                                                                  .]]1]1*32/2/////////////2<|}}}}}}}}}}}}}|(}}}}}}}}}}}}}}}}}}}}}|///2|3@]....                                                                    ",
-"                                                                     ...]11_)22/2//////2/////22<<|}}}}}}}}}}}}(}}}}(}}}}(}}}}}}<2/22)*@1]]..                                                                      ",
-"                                                                       ...]]11_)/2/2////////////////2<<|}}}}}}}}}}}}}}}}}}}|<<//2[_11.....                                                                        ",
-"                                                                          ..]]]]1*3(2/2/2/////////2////////222<<<<<<<<222///2|3*1]]....                                                                           ",
-"                                                                             ....]111@~(<2/2///2////////2///////////////2)~_1]].....                                                                              ",
-"                                                                                ....]]]1]1@_3)(2222/2/////////2222<)[_*@]]].]....                                                                                 ",
-"                                                                                    ....]]]]1]111@@**_~_~~_~_*@*11]]]].......                                                                                     ",
-"                                                                                        .........]]]]]]]]]]]]]]].........                                                                                         ",
-"                                                                                               ....................                                                                                               ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  "};
diff --git a/perl-install/pixmaps/mouse_3b_mini.xpm b/perl-install/pixmaps/mouse_3b_mini.xpm
deleted file mode 100644
index d7ecefe60..000000000
--- a/perl-install/pixmaps/mouse_3b_mini.xpm
+++ /dev/null
@@ -1,211 +0,0 @@
-/* XPM */
-static char * mouse_3b_mini_xpm[] = {
-"105 175 33 1",
-" 	c None",
-".	c #0C1834",
-"+	c #FE9A02",
-"@	c #303C5D",
-"#	c #AB8128",
-"$	c #E7A418",
-"%	c #DAA22A",
-"&	c #95742E",
-"*	c #E6A929",
-"=	c #747C98",
-"-	c #62543B",
-";	c #F7B01E",
-">	c #FEA005",
-",	c #B7944C",
-"'	c #ACAECB",
-")	c #816834",
-"!	c #7C85A3",
-"~	c #AFB2CF",
-"{	c #A28C5E",
-"]	c #5F6A8B",
-"^	c #E2A62E",
-"/	c #14254C",
-"(	c #424E6E",
-"_	c #FEB212",
-":	c #BABEDA",
-"<	c #6B7491",
-"[	c #848BA9",
-"}	c #9A9ABE",
-"|	c #D6A236",
-"1	c #A6A8C7",
-"2	c #9FA0C0",
-"3	c #515D7F",
-"4	c #CB9420",
-"                                                ]]}3.                                                    ",
-"                                                3]}(.                                                    ",
-"                                                ]<}@.                                                    ",
-"                                                3=}@.                                                    ",
-"                                                3=}/                                                     ",
-"                                                3!}/                                                     ",
-"                                                3!}.                                                     ",
-"                                                (!}.                                                     ",
-"                                                3[}.                                                     ",
-"                                                ([}.                                                     ",
-"                                                (}}.                                                     ",
-"                                                (!}.                                                     ",
-"                                                (!}.                                                     ",
-"                                                (!}/                                                     ",
-"                                                (=}/                                                     ",
-"                                                (=}@                                                     ",
-"                                                ]<}@.                                                    ",
-"                                                ==}<@@                                                   ",
-"                                               !!}}}!@/                                                  ",
-"                                               3}}}}}[/                                                  ",
-"                                               (}}}}}}/                                                  ",
-"                                               @}}}}}}(.                                                 ",
-"                                               ([}}}}}3.                                                 ",
-"                                               (!}}}}}<.                                                 ",
-"                                               3!}}}}}!/                                                 ",
-"                                               ](@@@@@@/(                                                ",
-"                                           '2}[]3<]==<]3]]===                                            ",
-"                                         2}[2'::~'~1111'':1}=]]]                                         ",
-"                                      ~2[=(:22}}}}}}}}}}}}2:[/3(]3                                       ",
-"                                     2[,_$/}1}}}}}}}}}}}}}}2(@_%-(33                                     ",
-"                                   '[,;___(]'}}}}}}}}}}}}}}}/)___4(((                                    ",
-"                                  2[^_;>__)@:}}}}}}}}}[}}}}!/#_____&@((                                  ",
-"                                ~}{_>+++__#/:1}}}}}}}}}}}}}</$______4@@@                                 ",
-"                               '[,;>+++>__4/~~}}}}}}}}}}}}2]/________;-@@                                ",
-"                              1!%>+++++___*/}:2}}[}}}}}}}}13@_________;)@@                               ",
-"                             2!*>+++++_____/[:'}}}}}}}}}}}1@-_________;;)/@                              ",
-"                            1!$++++++______@=::}}}}}}}[}}}~@-____________)//                             ",
-"                           2!%++++++_______(]::'}}}}}}}}}}:/&_____________)@/                            ",
-"                          1!%>+++++>_______-3:~:}}}}}}}}}}:/)______________-//                           ",
-"                          [,>+++++_________-3:::2}[}}}}}}}1/#_______________(//                          ",
-"                         }{>+++++>_________)3:::~2}}}}}}[21/#_______________$@//                         ",
-"                        }=_+++++;__________)(~:::2}}}}}}}}1/4________________4//                         ",
-"                       2!$+++++>___________)(:~::~}}}}}}}2}/4_________________&//                        ",
-"                       [4>++++_____________&(:::::2}[}}}}2[/4__________________(//                       ",
-"                      }{;++++>_____________#@~::~:~2}}}}}2}/%__________________$//                       ",
-"                     }=*++++_______________&@::::::2}}}}}}}/*________________>__&//                      ",
-"                     !4>+++>_______________#@~:::::~}}}}}}[/$_________________>__(/.                     ",
-"                    [!_+++>________________&@:~:~:::2}}[}2!/*__________________>_%//                     ",
-"                    =*>++>_________________#@:::::::~}}}}}!/%__________________>>_)/.                    ",
-"                   [{_++>__________________&@~:::~:::'}}}}!/*__________________;+;;//                    ",
-"                  }<;++>___________________#@::~::::::2}}}!/*___________________++_&//                   ",
-"                  !,;+>____________________&@::::~:::~:}}1[/*___________________>+>;@/                   ",
-"                 [=_+>_____________________&@~:::::::::~1~}/$___________________>>+;&//                  ",
-"                 !,;>______________________)(::::~:::~::::}/|___________________;+++_@/                  ",
-"                [=_>;______________________)(:~:::::::::::}/4____________________+++>#./                 ",
-"                [{_>_______________________-(::::~::~:::~:1/,___________________>++++;@.                 ",
-"                <__________________________]3::~::::::::::~/#____________________++++>&//                ",
-"               !#__________________________(]:::::::~:~::::/#___________________>+++++;/.                ",
-"               <|;_________________________@]::::~:::::~:::@)___________________>+++++>-/.               ",
-"              [(4__________________________@!:~:::~:~::::::@)__________________;++++++>-//               ",
-"              =@)__________________________.[:::::::::::~::((__________________>++++++>///               ",
-"             !<<@_________________________%/}:::~::::~:::::](_________________>+++++++#/@3.              ",
-"             ![~/)________________________,/':~:::::::~::::</_________________+++++++$//[2/              ",
-"             <~:[/,_______________________&/::::~:~::::::::[/________________+++++++>(/3::@.             ",
-"            !<:::</#______________________)@::::::::~::~:::1/,______________++++++>$@/3~2:</             ",
-"            =}::::!/3_____________________(3:~::::~:::::::::/{____________++++++>_#//]'}}1'.             ",
-"            ]~:::::2(/)___________________@<:::~:::::~:~:~::@)___________>++++>_#(/@[12}}}:(.            ",
-"           !=::~:::::!@@]|_______________%/}:~::::~:::::::::3(________>++>>>_$&@//=~2}}}}}~=/            ",
-"           =}:::::~::::!(/@],*___________#/~:::::::::::~::::</________>__;4)@//([~2}}}}}}}1'/            ",
-"           ]~::~::~::::::'=3/@@3&,*______-(::~:~::~:~:::::::'/,_____$4&)@///(=''2}}}}}}}}}2:@.           ",
-"          ==::::::::~::::::::2=3(///@(-)&/3}}1111::::::~121}[@(&)-@////@3=2::1}}}}}}}}}}}}}~=/           ",
-"          =[::::::::::~:::~:::::::~[!<3(@@/////////////////////@(3]=[2::~'1}}}}}}}}}}}[}}}}11.           ",
-"          ]~:~:~::~::~:::~::::~:::~''~~:::::~1112[}[[}[}111~::::~:::~'122}}}}}}}}}}}}}}}}}}2:@.          ",
-"         =<::::::::::::::::~::::::::~1}}2221'~~~:~:::::::~:~~~''112}}}}}}}}}}}}}}}}}}}}}}}}}~].          ",
-"         =[:::::~::~:::~:::::~::~::::::12}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}[}}}}}}[}}}}'[/          ",
-"         ]1~:~:::::~::::~::::::::::::::::~2}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}1~/          ",
-"         ]::::::~:::::~::::~::~:~:~:~:~::::~1}}}}}}}}}}[2}}}}[}}}}}}}}}}}}[}}}}}}}}}}}}}}}}}}:(.         ",
-"        ==::::::::::::::~::::::::::::::::::::~1}}}}}}}}}}}}}}}}}}}}}}}[}}}}}}[}}}}[}}}}}}}}}}'<.         ",
-"        <[:~::::::~:::~::::~::::~::::::~:~:::::~12[}}}}}}}}}}}}[}}}}}}}}}}}}}}}}}}}}}}}[}}}}}1}.         ",
-"        <1:::~:~::::::::~::::~::::~:~:::::::::::::'}}}}}[}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}2:/         ",
-"        ]::::::::~:~:::::::::::::::::~::::~::::::::~'2}}}}}}}}}}}[}}}}}[}}}}}[}}}}[}}}}}}}}}}}:(.        ",
-"       <=::::~:::::::~:::~::::~:::::::::::::~:~:::::::'}}}}}[}}}}}}}}}}}}}}}}}}}}}}}}}}}}[}}}}'].        ",
-"       <[:~::::~:::::::::::~:::~:~:~::~:~::::::~::::~::~'}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}1[/        ",
-"       ]1::~:::~::~:~:::::::::::::::::::::~::::::~::::::~:1}}}}}}}}[}}}}}[}}}}}}[}}}}}}}}}[}}}2~.        ",
-"       ]::::::::::::::~:~::~:~::::::~:~::::::~::::~::::::::~2}}}}}}}}}[}}}}}[}}}}}}[}}}}}}}}}}}:@        ",
-"      <]:::::::~:::~:::::::::::~::~::::::::~:::~::::~::::::::'}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}'3.       ",
-"      <!~::::::::~::::::~:::::::::::::~:~::::::::::::~:~::::::~1}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}1=.       ",
-"      <[::~:~:::::::::~:::::~:::~:~::::::::~::::~:::::::~:~:::::~2}{}}}}[}}}}}}}[}}}}[}}}}}}}}}2}.       ",
-"      ]1:::::::::::~::::~::::~::::::~:::~:::~::::~:~::::::::~:::::~2}}}}}}}}[}}}}}}}}}}}}}}[}}}}~/       ",
-"      ]:::~:~:~:~:::::::::~:::::::~:::~:::::::~::::::~:::~::::::::~:2}}}}}}}}}}}}}}}}}}}}}}}}}}}~@       ",
-"      ]:~::::::::~::~:~::::~:~::::::::::::~::::~:::::::::::~::~:~::::~}}}}}}}}}}[}}}}[}}}}}}}}}}'(.      ",
-"     ]!:~:::::::::::::::~::::::~::~:::~:~:::~:::::~::~::~::::::::::::::2}}}}}}}}}}}}}}}}}}}}}}}}1].      ",
-"     ][~~:~:~:~:::~::::::::::::::::~::::::::::::::::::::::~::~::::~:::::'}}}}}}}}}}}}}}}}}}[}}}}2[.      ",
-"     ]2':::::::::::::~:::~:::~:~::::::::~:::::~:~::~:::~::::::::::::~::::~}}}[}}}[}}}}[}}}}}}}}}}2.      ",
-"     ]~1:::::~:~:::~::~:::~::::::~::~::::~:~:::::::::~:::~::~::~::~:::~::::'}}}}}}}}}}}}}}}}}}}}}~/      ",
-"     3:2~:~::::::~::::::::::::::::::::::::::::::~:~:::::::::::::::::::::::::~}}}}}}}}}}}}}}}}}}}}'@      ",
-"     <:1::::::::::::~:~:~:~::~:~::~:~::~:::~:~:::::::::~::~::~:::::~::~::~::::2}}}[}}}}[}}}}[}}}}1(.     ",
-"    ]<'1::~:~::~:~:::::::::::::::::::::::::::::::~::~:::::::::~:~::::::::::~:::2}}}}}}}}}}}}}}}}}13.     ",
-"    ][11::::::::::::::::::~::~::~:::~:::~:::::::::::::~::~:::::::::~::~::::::~::'}}}[}}}}}}}}}}}}2<.     ",
-"    ][1':::::~::::~::::~::::::::::::::~::~:~:~:~:~:~::::::~:~::::::::::::~:::::::~}}}}}}[}}}}}}}}}[.     ",
-"    ]22'::~::::~:::~::::~:~:::~::~:::::::::::::::::::~::::::::~:~::::~:~::::~::~::~2}}}}}}}}}[}}}}}.     ",
-"    3'}~~:::~::::::::~::::::::::::::~:~::::~:~::~::::::~::::~:::::~:::::~::::::::::~}}}}}}}}}}}}}}'.     ",
-"    3:}~::::::::~:::::::::~:~::~:~::::::~:::::::::~::::::~::::~:::::::::::~::~::~::::2}}}[}}}}}}}}~/     ",
-"    ]~}~::~::~:::~:~::~::::::::::::::::::::::~:~:::~::~:::::~:::~::~::::::::::::::::::2}}}}}}}}}}}~/     ",
-"    ]~}~::::~:::::::::::~::::~:::~:::~::::::::::::::::::~:::::::::::~::~::::~::::~::~::1}}}}}}}[}}~(     ",
-"   ]<1}~~:::::~::::~::~::::~:::::::~::~:~:~::::~:::::~:::::~:::::~:::::::~::::~:::::::~:2}}}}}}}}}1(.    ",
-"   ]=1}~::~:::::~::::::::~::::~:::::::::::::~::::~:~:::~::::~:~::::::~:::::::::::~:::::::2}}}}}}}}13.    ",
-"   3!1}~::::::~::::~::~::::::::~:~:~::~:::~:::~:::::::::::~:::::::~:::~:::~:::~::::~:::~::2}}}}}}}1].    ",
-"   ][1}~:~:~:::::::::::~::~:~::::::::::~::::::::::::~:~:::::~::~:::::::~:::~:::::::::~:::::2}}}}}}2=.    ",
-"   3[}}'::::::~:~::~:::::::::::::::~::::::~::~:~:~:::::~::~::::::~:~::::::::::::~:::::::~:~:2}}}}}1=.    ",
-"   312}':::~:::::::::~::~::::~:~:::::~:::::::::::::::::::::::~:::::::::~:~::~:~:::~:::~::::::}}}}}2}.    ",
-"   3}}}'~:::::::~:::::::::~::::::::::::~::~:~::::~:~:::::~:::::::~::~::::::::::::::~::::::~:~:}}}}1[.    ",
-"   31}}1::~::~:::~:~::~::::::::~:~:~:::::::::::~:::::~:~::~:~:~::::::~::~:~::~::~:::::::~:::::~}}}22.    ",
-"   (~}}2:::::::::::::::::::~:~:::::::::~::::~:::::~:::::::::::::::~::::::::::::::::~:~:::::::::~}}11.    ",
-"   3'}}2::~::~:~::::~::~:~:::::::~::~::::~::::::::::~::::~:::~:~:::~:::::~::~::::~::::::::~:::::~2'1.    ",
-"   3~}}}::::::::::~::::::::::::~:::::::~:::~::~::~::::~:::::::::::::::~:::::::~::::::~:~::::~::::::~.    ",
-"   (:}}}~:~:::::~::::~:::~::~:::::~:::::::::::::::::::::~:~:::~:~::~::::::~::::::::~:::::~::::~::~::.    ",
-"   (:}}}~:::~:~:::~::::~::::::::::::~::~::~::~::~:~::~::::::::::::::::~:~::~::~:~:::::~::::~::::::::.    ",
-"   (:}}}':::::::::::::::::~::~:~:::::::::::::::::::::::~::~:~::~:~:~:::::::::::::::::::::::::~:::::~/    ",
-"   (:}}}2:~:::~:::~:~::~:::::::::~::~::~::~::~:::~::~::::::::::::::::~::~::::~::~::~:::~::~::::~:~::.    ",
-"   (:1}}}::::::~::::::::~::~:::::::::::::::::::~::::::~:::~::~::::::::::::~::::::::::~::::::~::::::~.    ",
-"   (:2}}}~:~::::::~::~:::::::~:~:~::~::~:~::~::::::~:::~:::::::~:~::~::~::::~::~::~::::::~::::::~:::.    ",
-"   ('1}}}~:::~:::::::::~:~:::::::::::::::::::::::~:::::::~::::::::::::::::::::::::::~::~:::~::::::~1.    ",
-"   (11}}}2:~:::~:~::~::::::::::::~::~::~:~::~:~:::::~:::::::~:::~::~::~:~::~::~::~::::::::::~::~:::2.    ",
-"   (}~}}}}::::::::::::::~:~:~:::::::::::::::::::::::::~:~:::::~::::::::::::::::::::~::::~::::::::::[.    ",
-"   @[~}}}}~~::~:::~::~::::::::~::~::~::::~::::~:~::~:::::::~::::~::~:::~::~::~::~::::~::::::~::~:::=.    ",
-"   (!~}}}}1:::::~:::::::::~:::::::::::~::::~:::::::::~:::~:::::::::::~::::::::::::~::::~::~::::::~:].    ",
-"   @]:2[}}}::~::::~::~:~::::::~::~::~::~:::::::~::~:::~::::::~::::~::::::~::~::~::::::::::::::~::::(.    ",
-"   @3:}}}}}1:::~::::~:::::~:::::::::::::::~::~::::::::::~::~:::~:::::::~:::::::::~::~:~:::::~:::::~@     ",
-"    @:1}}}}2:::::~::::::~:::~:~::~::~::~:::::::~:::~::::::::::::::~:~::::::~::~::::::::~:~:::::~::~.     ",
-"    @2~}}}}}~~::::::~::::::::::::::::::::~:::::::~:::~:~::::~:~::::::::::~::::::~::~:::::::::::::~[.     ",
-"    /!:}[}}}2:~::~::::~:~:~:::~::~:::~:::::~:::::::::::::~:::::::~::~:~::::::~:::::::::::~:~::~:::].     ",
-"    @3:}}}}}}~:::::~::::::::::::::::::::~::::~:~::~::::::::::::~:::::::::::~:::~::~::~::::::::::::@.     ",
-"     @:1}}}}}2:~::::~::::::~::~::~:~:~:::::::::::::~:~::~:~:~::::::~::~:~:::::::::::::~:::~::~:~:~.      ",
-"     /}~}}}}}}1:::::::~:~::::::::::::::~::~:::~::::::::::::::::::~::::::::::~:::~::~::::~::::::::!.      ",
-"     /]~}}}}}}2~~::~:::::::~::~::~::~::::::~::::~:::~::~::::~:~::::~:::~:~:::~::::::::::::~::::~:(.      ",
-"      @:1}[}}}}2:::::~::~:::::::::::::::~:::::::::~::::::~:::::::::::~:::::::::~::::~:::::::~:::'/       ",
-"      /[~}}}}}}}~~:::::::::~::~::~:~:~::::::~::~::::::~::::~:::~:::::::::~::~::::~::::~:::::::::=.       ",
-"      /3:}}}}}}}}~::~::::::::::::::::::~::~:::::::::~::::::::~:::~:~:::~::::::~::::~::::~:~::~:~@.       ",
-"       /~1}}[}}}}}~::::~:~:~::~:::~:::::::::~::~:~:::::~::~:::::::::~::::::~:::::::::::::::::::2.        ",
-"       /<:}}}}}}}}2~:~:::::::::::::~::~:::::::::::::::::::::~::~:::::::::~:::~::~:~::~:::~::~::3.        ",
-"        /~1}2[}}}}}}:::::::~::~:~:::::::~::~::~::~:~::~::~::::::~:::~:~:::::::::::::::~:::::::1.         ",
-"        /=~}}}}}}}}}}~::::::::::::~:~::::::::::::::::::::::~::::::~::::::::~::~::::~::::~::~::3.         ",
-"        /@~1}}}}}}}}}}~:~::~::~:::::::::~::~::~:::~::~::~:::~:::::::::~:~:::::::~::::::::::::1.          ",
-"         /<:}}[}}}}}}}}~:::::::~::~::~::::::::::~:::::::::::::~:~:::~:::::~::~::::~::~:~::~::3.          ",
-"          /1'}}}}[}}}}}}1~:~::::::::::::::~::~::::~::~::~::::::::~:::::~::::::::::::::::::::}.           ",
-"          /3:}}}}}}}}}}}}2~::::~:~::~::~::::::::::::::::::~:~::::::::::::~::~::~:~::~:::~::~@.           ",
-"           /[~}}}}}[}}}}}}}1~~:::::::::::~::~::~::::~::~:::::~:::::~::~::::::::::::::~:::::!.            ",
-"           /@~1}}}}}}}}}}}}}21:~:::~:::::::::::::~:::::::~:::::~:~::::::~::~::~:::~::::~::1/.            ",
-"            /3:}}}}}}}[}}}}}}}}'~::::~::~::~::~::::~::~::::::::::::::~:::::::::~:::::::::~(.             ",
-"             /[:}}}}}}}}}}}}}}}}}2':~:::::::::::~:::::::~::~::~:::~::::~::~:::::::::~::::<.              ",
-"             //1~}}}}}}}}}}}}}}}}}}}1':~::~::~:::::::~:::::::::~:::::::::::~:::~:~::::~:}..              ",
-"              /@~'}}}}}[}}}}}}}}}}}}}}}21~~::::~::~::::~::~::::::~::~:~::::::~:::::::::'@.               ",
-"               /(:1}}}}}}}}}}}}}}}}}}}}}}}}}211~~~:::::::::~:::::::::::~::~::::::~:~::~@.                ",
-"                /3:1}}}}}[}}}}}}}}}}}}}}}}}}}}}}}}}}}22'~::::~:~::~:::::::::::~::::::~3.                 ",
-"                 /]:'}}}}}}[}}[}}}}}}}}}}}}}}}}}}}}}}}}}}}1~:::::::~:::~:::~::::::::~].                  ",
-"                  /<:'}}}}}}}}}}}[}}[}}}}}}}}}}}}}}[}}}}}}}}2~:~:::::~:::~:::~:~:~::].                   ",
-"                   /<:~}}}}}}}}}}}}}}}}}}[}}}}}}}}}}}}}}}}}}}}2:::~::::::::::::::::].                    ",
-"                    .3::1}}}}}}}}}}}}}}}}}}}}[}}}}}}}}}}}}}}}}}}~::::~::~:~:::::~:3.                     ",
-"                     /(~:'}}}}}}}}}}}}}}}}}}}}}}}}}}}}}[}}}}}}}}}~~::::::::~:~::~(.                      ",
-"                      .@2:~1}[}}}}}[}}}}}}}}}}}}}}}}}}}}}}[}}}}}}}:~::~::::::::1@.                       ",
-"                       ./!::~2}[}}}}}[}}}}}}}}}[}}}}}}}}}}}}}}}}}}2::::~::~:::[/.                        ",
-"                        ./3~::~2}}}}}}}}}}}}}}}}}}}[}}}}}}}}}[}}}}}~::::::::~]..                         ",
-"                          //[:::'2}}}}}}}[}}}}}}}}}}}}}}}}}}}}}}}}}~~::~:~:}@.                           ",
-"                           ./(1:::~1}}}}}}}}}}}}}}}}}}}[}}}}}}}}}}}~:::::'3..                            ",
-"                             ./31:::~1}}}}}}}}}[}}}}}}}}}}}}}}}}}}}~~::~=/.                              ",
-"                               ./32::::~12}}[}}}}}}}}}}}}}}[}}}}}}1::~</..                               ",
-"                                 ./([::::~:~'2}}}}[}}}}}}}}}}[}}}':2]/..                                 ",
-"                                   ../3}::::::~~'122}}}}}}}}}2211<@..                                    ",
-"                                      ../(<}~::::::~:~~'~~~~1!]@...                                      ",
-"                                         ....@(3<=[[[[[<]3@/....                                         ",
-"                                              .............                                              ",
-"                                                                                                         ",
-"                                                                                                         ",
-"                                                                                                         "};
diff --git a/perl-install/pixmaps/mouse_left.xpm b/perl-install/pixmaps/mouse_left.xpm
deleted file mode 100644
index 13fce0362..000000000
--- a/perl-install/pixmaps/mouse_left.xpm
+++ /dev/null
@@ -1,142 +0,0 @@
-/* XPM */
-static char * mouse_left_xpm[] = {
-"59 91 48 1",
-" 	c None",
-".	c #AFB0CD",
-"+	c #A7A9C8",
-"@	c #9FA1C0",
-"#	c #9A9ABE",
-"$	c #848CAA",
-"%	c #697392",
-"&	c #7B84A1",
-"*	c #122450",
-"=	c #757C94",
-"-	c #BABEDA",
-";	c #4D283C",
-">	c #B52E19",
-",	c #5C2937",
-"'	c #C42F14",
-")	c #FF3300",
-"!	c #D3300F",
-"~	c #302646",
-"{	c #4A5778",
-"]	c #7A2B2D",
-"^	c #21254B",
-"/	c #892C28",
-"(	c #E1310A",
-"_	c #FF4000",
-":	c #FF6000",
-"<	c #FF7300",
-"[	c #FF7900",
-"}	c #972C23",
-"|	c #FF5900",
-"1	c #FF8000",
-"2	c #FF9900",
-"3	c #FF4D00",
-"4	c #3E2741",
-"5	c #FF8C00",
-"6	c #FF9300",
-"7	c #3E4862",
-"8	c #6B2A32",
-"9	c #F03205",
-"0	c #FF5300",
-"a	c #FF3900",
-"b	c #FF4600",
-"c	c #FF8600",
-"d	c #FF6600",
-"e	c #5C6888",
-"f	c #FF6C00",
-"g	c #A62D1E",
-"h	c #11244D",
-"i	c #253359",
-"                                                         .+",
-"                                                      .++@@",
-"                                                    .++#$%&",
-"                                                 .***$=$@--",
-"                                               .******&---.",
-"                                             .****;>,**--##",
-"                                           .****;'))!**=-@#",
-"                                          ****;')))))~*{-.#",
-"                                        .***~')))))))]**--#",
-"                                       .**^/)))))))))>**$-.",
-"                                     .***;()))_:<[_))(**=-.",
-"                                    .**^})))|122223)))^*{--",
-"                                   ***4!))|5222226))));*7--",
-"                                 .***89)052222222|))))]**--",
-"                                .***})_1222222221)))))/**+.",
-"                               .**^')|6222222226a)))))'**#-",
-"                              .**~!a<2222222226b))))))'**=-",
-"                             +**49bc2222222222|))))))))**%-",
-"                            +**49b62222222222d)))))))))**e.",
-"                           +**49|22222222222<))))))))));*7-",
-"                          +**49|22222222222<)))))))))));*7-",
-"                         +**49|22222222222ca))))))))))),**-",
-"                        +**49|22222222222ca))))))))))))/**-",
-"                       +**49|22222222222ca)))))))))))))/**-",
-"                      +**^(b22222222222ca))))))))))))))}**-",
-"                      **^!b622222222226b)))))))))))))))'**#",
-"                     ***>a522222222226b))))))))))))))))'**#",
-"                    +**})122222222226b)))))))))))))))))'**#",
-"                   @**8)f22222222226b))))))))))))))))))(**$",
-"                  @**49|22222222226b))))))))))))))))))))**$",
-"                  **^!_62222222226b)))))))))))))))))))))**%",
-"                 @**>)c2222222226b))))))))))))))))))))))**e",
-"                @**])d22222222220)))))))))))))))))))))))**%",
-"               @**4932222222222|))))))))))))))))))))))))**e",
-"               ***!a5222222222|)))))))))))))))))))))))))4*%",
-"              @**/)f222222222|))))))))))))))))))))))))));*e",
-"             @**;)3222222222|)))))))))))))))))))))))))));*{",
-"             **^()c22222222|))))))))))))))))))))))))))));*7",
-"            #**/)d22222222|)))))))))))))))))))))))))))));*7",
-"           #**4)_62222222|))))))))))))))))))))))))))))));*7",
-"           #**!)[2222222:)))))))))))))))))))))))))))))));*7",
-"          @**])32222222<))))))))))))))))))))))))))))))));*7",
-"          **^9)5222222<)))))))))))))))))))))))))))))))));*7",
-"         #**g)|222222<))))))))))))))))))))))))))))))))));*7",
-"        #**;)a622222<)))))))))))))))))))))))))))))))))));*7",
-"        #**')d22222[))))))))))))))))))))))))))))))))))));*7",
-"       #**8)a62222ca))))))))))))))))))))))))))))))))))));*7",
-"       $*^()f2222ca)))))))))))))))))))))))))))))))))))));*7",
-"      #**/)_22225a))))))))))))))))))))))))))))))))))))));*7",
-"      **^9)<2226b)))))))))))))))))))))))))))))))))))))));*7",
-"     #**/)_2226b))))))))))))))))))))))))))))))))))))))));*{",
-"     **~))<2220)))))))))))))))))))))))))))))))))))))))));*7",
-"    #**g)a222|))))))))))))))))))))))))))))))))))))))))));*7",
-"    **~))d22f)))))))))))))))))))))))))))))))))))))))))))4*e",
-"   #**g)a62[))))))))))))))))))))))))))))))))))))))))))))**%",
-"   **~)):2ca))))))))))))))))))))))))))))))))))))))))))))**%",
-"  #**g))56b)))))))))))))))))))))))))))))))))))))))))))))**%",
-"  $*^))|20))))))))))))))))))))))))))))))))))))))))))))))**%",
-" $**/))1f))))))))))))))))))))))))))))))))))))))))))))))9**=",
-" $*^9)bc)))))))))))))))))))))))))))))))))))))))))))))))'**#",
-"$**/))<b)))))))))))))))))))))))))))))))))))))))))))))))'**$",
-"$**()a:))))))))))))))))))))))))))))))))))))))))))))))))'**#",
-"**8))|_))))))))))))))))))))))))))))))))))))))))))))))))}**#",
-"**!)):)))))))))))))))))))))))))))))))))))))))))))))))))/**-",
-"*4))0_)))))))))))))))))))))))))))))))))))))))))))))))))/**-",
-"*;))3)))))))))))))))))))))))))))))))))))))))))))))))))),*h-",
-"*4)))))))))))))))))))))))))))))))))))))))))))))))))))));*7-",
-"**)))))))))))))))))))))))))))))))))))))))))))))))))))))4*7-",
-"**>))))))))))))))))))))))))))))))))))))))))))))))))))))**{-",
-"**8))))))))))))))))))))))))))))))))))))))))))))))))))))**e-",
-"h*^9))))))))))))))))))))))))))))))))))))))))))))))))))'**%-",
-"7**/))))))))))))))))))))))))))))))))))))))))))))))))))'**$-",
-"#h**!)))))))))))))))))))))))))))))))))))))))))))))))))/**#-",
-"-7**49))))))))))))))))))))))))))))))))))))))))))))))))]**.-",
-"-+i**8))))))))))))))))))))))))))))))))))))))))))))))));*h--",
-"--$h**8)))))))))))))))))))))))))))))))))))))))))))))))~*7--",
-"---=h**89)))))))))))))))))))))))))))))))))))))))))))))**{.-",
-".---eh**4()))))))))))))))))))))))))))))))))))))))))))'**%--",
-"-----&h**^}))))))))))))))))))))))))))))))))))))))))))g**$--",
-"-.--.-#i***;!))))))))))))))))))))))))))))))))))))))))/**#--",
-"------..{****8())))))))))))))))))))))))))))))))))))));*h--.",
-"-.-------$i****8!))))))))))))))))))))))))))))))))))))^*7---",
-"---.------.%i****4g9))))))))))))))))))))))))))))))))(**{---",
-"------------.%i****^8>))))))))))))))))))))))))))))))>**&.--",
-".---.--.------.&i*****^,g())))))))))))))))))))))))))]**+---",
-"-.------.--.-----@{h******~8g())))))))))))))))))))))4*i----",
-"-----.-------.------${i*******~,/'())))))))))))))))9**{--.-",
-"--.-----.-----.--------@%7h********^;8/'!))))))))))g**$----",
-"-----------.----.----------#%{h***********^;,//>'');**-.---",
-"----.---.----------.-.-.--.----.$%77h****************h{e%ee",
-"-.------------.-------------.------.-##%e77h*********hhhhhh"};
diff --git a/perl-install/pixmaps/mouse_middle.xpm b/perl-install/pixmaps/mouse_middle.xpm
deleted file mode 100644
index 1724c9190..000000000
--- a/perl-install/pixmaps/mouse_middle.xpm
+++ /dev/null
@@ -1,89 +0,0 @@
-/* XPM */
-static char * mouse_middle_xpm[] = {
-"13 62 24 1",
-" 	c None",
-".	c #999ABD",
-"+	c #9E9EC1",
-"@	c #FF3310",
-"#	c #77819E",
-"$	c #FF330C",
-"%	c #FF330B",
-"&	c #FF3300",
-"*	c #FF3308",
-"=	c #FF3307",
-"-	c #142753",
-";	c #384365",
-">	c #6F7892",
-",	c #0F1C3D",
-"'	c #FF3304",
-")	c #FF3303",
-"!	c #606C8C",
-"~	c #525E81",
-"{	c #6D6E91",
-"]	c #898BA4",
-"^	c #A3A4C3",
-"/	c #AEB2CF",
-"(	c #A9ADCA",
-"_	c #BABEDA",
-".+@@@@@@@@@..",
-"##$$$$$$$$%##",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"#-$$$$$$$$%##",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"#-$$$$$$$$%##",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&$$$$$$$$%&&",
-"#;$$$$$$$$%;#",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"##********=.>",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&$$$$$$$$%&&",
-"-#********=,#",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"##$$$$$$$$%&&",
-"&&'''''''').#",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"!!@@@@@@@@@~#",
-"&&'''''''')&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-"{!@@@@@@@@@~]",
-"&&'''''''')&&",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"!!@@@@@@@@@{.",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-"!{@@@@@@@@@!^",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-".]@@@@@@@@@./",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-"!!@@@@@@@@@!(",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-"!!$$$$$$$$%!^",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"!!@@@@@@@@@!+",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"/_@@@@@@@@@/_",
-"__@@@@@@@@@__"};
diff --git a/perl-install/pixmaps/mouse_right.xpm b/perl-install/pixmaps/mouse_right.xpm
deleted file mode 100644
index 97c6824cb..000000000
--- a/perl-install/pixmaps/mouse_right.xpm
+++ /dev/null
@@ -1,143 +0,0 @@
-/* XPM */
-static char * mouse_right_xpm[] = {
-"61 91 49 1",
-" 	c None",
-".	c #7B84A1",
-"+	c #697392",
-"@	c #757C94",
-"#	c #848CAA",
-"$	c #5C6888",
-"%	c #BABEDA",
-"&	c #9FA1C0",
-"*	c #4A5778",
-"=	c #122450",
-"-	c #AFB0CD",
-";	c #9A9ABE",
-">	c #A7A9C8",
-",	c #253359",
-"'	c #4D283C",
-")	c #C42F14",
-"!	c #B52E19",
-"~	c #FF3300",
-"{	c #E1310A",
-"]	c #6B2A32",
-"^	c #21254B",
-"/	c #5C2937",
-"(	c #3E2741",
-"_	c #972C23",
-":	c #3E4862",
-"<	c #F03205",
-"[	c #A62D1E",
-"}	c #7A2B2D",
-"|	c #892C28",
-"1	c #D3300F",
-"2	c #11244D",
-"3	c #0E1A3A",
-"4	c #FF5300",
-"5	c #FF4000",
-"6	c #FF6600",
-"7	c #FF3900",
-"8	c #302646",
-"9	c #FF7300",
-"0	c #FF8000",
-"a	c #FF9300",
-"b	c #FF4600",
-"c	c #FF8600",
-"d	c #FF7900",
-"e	c #FF9900",
-"f	c #FF6000",
-"g	c #FF4D00",
-"h	c #FF8C00",
-"i	c #FF6C00",
-"j	c #FF5900",
-"...                                                          ",
-"+++@@@                                                       ",
-"#@$$$++++                                                    ",
-"%%%&.*===++                                                  ",
-"-%%%.======$$                                                ",
-";>%%,=')'====$$                                              ",
-";;-;==!~~{]====*$                                            ",
-";;;*=^~~~~~{/====**                                          ",
-";;;==]~~~~~~~)(===***                                        ",
-";;#==_~~~~~~~~~_^===*:                                       ",
-";;@==)~~~~~~~~~~</===:*                                      ",
-";;+==~~~~~~~~~~~~~[^==:::                                    ",
-";>:=(~~~~~~~~~~~~~~{(===::                                   ",
-";%==/~~~~~~~~~~~~~~~~}===,:                                  ",
-";%==|~~~~~~~~~~~~~~~~~[^==:,                                 ",
-">;==_~~~~~~~~~~~~~~~~~~1^==:,,                               ",
-"-;==)~~~~~~~~~~~~~~~~~~~{(==:,,                              ",
-"%+==1~~~~~~~~~~~~~~~~~~~~<(==,,,                             ",
-"%$==~~~~~~~~~~~~~~~~~~~~~~<]==:,,                            ",
-"%*==~~~~~~~~~~~~~~~~~~~~~~~~]==,,2                           ",
-"%:='~~~~~~~~~~~~~~~~~~~~~~~~~]==,,2                          ",
-"%:='~~~~~~~~~~~~~~~~~~~~~~~~~~]==,22                         ",
-"%==/~~~~~~~~~~~~~~~~~~~~~~~~~~~'==,22                        ",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~<(==,22                       ",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~<(==,2                       ",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1^==22                      ",
-"&==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1===22                     ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~[===22                    ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~}==222                   ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~'==22                   ",
-";==<~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~<^==32                  ",
-"#==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~)===22                 ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|==222                ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~'==22                ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{^==22               ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~45~~~~[==232              ",
-"$==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~67~~~~/==22              ",
-"+=8~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~79~~~~<^==32             ",
-"+='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~46~~~~[==222            ",
-"+='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~04~~~~'==23            ",
-"+='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~5ab~~~{^==22           ",
-"+='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6c7~~~|==232          ",
-"*='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~7ad~~~~8==23          ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6ef~~~)==222         ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~7eeg~~~/==23         ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~9ea7~~{===22        ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~bee0~~~|==23        ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ceef~~<^==22       ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~feeeb~~_==232      ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~5eeec7~~8==23      ",
-"$='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~heeei~~[==223     ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ieeeeg~~8==32     ",
-"$==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~jeeeeh7~!==232    ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~beeeeei~~'==23    ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~eeeeeeg~)==223   ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~aeeeeeh~~(==32   ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeee6~[==233  ",
-";==1~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeea5~8==22  ",
-"#==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeee9~[==23  ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeeee5~8=223 ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~aeeeeeeee9~_==22 ",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~eeeeeeeeee5<^=233",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~geeeeeeeeee9~}==23",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~feeeeeeeeeea7{==22",
-"%:=/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeeeeeeej~/=22",
-"-:='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~5eeeeeeeeeeee9~]=23",
-"%:=(~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6eeeeeeeeeeee0~'=22",
-"%+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~7aeeeeeeeeeeeee~^=22",
-"%+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6eeeeeeeeeeeeec1==22",
-"%#==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~5aeeeeeeeeeeeee6}==22",
-"%;==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeeeeeeeeeh7^=22,",
-"%>==_~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6eeeeeeeeeeeeeeb_==22@",
-"%%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~jeeeeeeeeeeeeeej{^==2,%",
-"%%,=/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~jeeeeeeeeeeeeeej~'==22#%",
-"%%:='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~jeeeeeeeeeeeeea4~]==22$%%",
-"%%$==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6eeeeeeeeeeeeec5~]==22,-%-",
-"%%@=={~~~~~~~~~~~~~~~~~~~~~~~~~~~7deeeeeeeeeeeea6~~]==22:-%-;",
-"%%;==)~~~~~~~~~~~~~~~~~~~~~~~~~~gheeeeeeeeeeee95~<'==22:-%-;;",
-"%->==|~~~~~~~~~~~~~~~~~~~~~~~~79eeeeeeeeeeee95~~!^==22*-%&;;;",
-"%%%==]~~~~~~~~~~~~~~~~~~~~~~76aeeeeeeeeeea65~~{'===22+%-&;;;;",
-"%%%:=(~~~~~~~~~~~~~~~~~~~~76aeeeeeeeeeed4~~~{]====2,;--;;;;;;",
-"%-%$==~~~~~~~~~~~~~~~~~~56aeeeeeeeeedj7~~~{]====2,+%-&;;;;;;;",
-"%%%@==)~~~~~~~~~~~~~~~4deeeeeeeeci4~~~~~['====22*>%-&;;;;;;#;",
-"%%%&==_~~~~~~~~~~~~49aeeeeee0i47~~~~~!]^====22*>%-;;;;;;;;;;;",
-"%%%%==]~~~~~~~~7j9aeeee0ifg~~~~~~<[]^=====2,+%%-&;;;;;;;;;;;;",
-"%-%%:=8~~~~74ice006fg7~~~~~~~{!}(======22$#%%-&;;;;;;;#;;;;;;",
-"%%%%+==1~~bggb~~~~~~~~~~<)|/8=======2,*.-%%>&;;;;;;;;;;;;;;;#",
-"%-%%&==_~~~~~~~~~~1)|}'^========22:$;%%%%-;;;;;;;;#;;;;;;;;;;",
-"%%%%%,=(~1)!||/'8===========22:+#-%%%%-&;;;;;;;;;;;;;;;;;;;;;",
-";#+$+:================23,:+.&%%%%%%-&;;;;;;;;;;;;;;;;;;#;;;;;",
-"222222=========22,:*$.;-%%%%%%%%>&&;;;;;;;;;;;;;;;;#;;;;;;;;;"};
diff --git a/perl-install/pixmaps/network.png b/perl-install/pixmaps/network.png
deleted file mode 100644
index aee48fb09..000000000
--- a/perl-install/pixmaps/network.png
+++ /dev/null
diff --git a/perl-install/pixmaps/partition.png b/perl-install/pixmaps/partition.png
deleted file mode 100644
index 982fb7681..000000000
--- a/perl-install/pixmaps/partition.png
+++ /dev/null
diff --git a/perl-install/pixmaps/printer.png b/perl-install/pixmaps/printer.png
deleted file mode 100644
index 6c439143d..000000000
--- a/perl-install/pixmaps/printer.png
+++ /dev/null
diff --git a/perl-install/pixmaps/rootpasswd.png b/perl-install/pixmaps/rootpasswd.png
deleted file mode 100644
index af153abb6..000000000
--- a/perl-install/pixmaps/rootpasswd.png
+++ /dev/null
diff --git a/perl-install/pixmaps/security.png b/perl-install/pixmaps/security.png
deleted file mode 100644
index af153abb6..000000000
--- a/perl-install/pixmaps/security.png
+++ /dev/null
diff --git a/perl-install/pixmaps/services.png b/perl-install/pixmaps/services.png
deleted file mode 100644
index 7cd8b06d6..000000000
--- a/perl-install/pixmaps/services.png
+++ /dev/null
diff --git a/perl-install/pixmaps/summary.png b/perl-install/pixmaps/summary.png
deleted file mode 100644
index 79a1e0f4f..000000000
--- a/perl-install/pixmaps/summary.png
+++ /dev/null
diff --git a/perl-install/pixmaps/user.png b/perl-install/pixmaps/user.png
deleted file mode 100644
index a9f7d0eb6..000000000
--- a/perl-install/pixmaps/user.png
+++ /dev/null
diff --git a/perl-install/pkgs.pm b/perl-install/pkgs.pm
deleted file mode 100644
index 690ddeb18..000000000
--- a/perl-install/pkgs.pm
+++ /dev/null
@@ -1,1647 +0,0 @@
-package pkgs; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(*LOG %preferred $limitMinTrans %compssListDesc);
-
-use MDK::Common::System;
-use common;
-use install_any;
-use run_program;
-use detect_devices;
-use log;
-use fs;
-use loopback;
-use c;
-
-
-
-my @preferred = qw(perl-GTK postfix proftpd ghostscript-X vim-minimal kernel db1 db2 ispell-en Bastille-Curses-module nautilus);
-@preferred{@preferred} = ();
-
-#- lower bound on the left ( aka 90 means [90-100[ )
-%compssListDesc = (
-   5 => __("must have"),
-   4 => __("important"),
-   3 => __("very nice"),
-   2 => __("nice"),
-   1 => __("maybe"),
-);
-
-#- constant for small transaction.
-$limitMinTrans = 8;
-
-#- constant for package accessor (via table).
-my $FILE                 = 0;
-my $FLAGS                = 1;
-my $SIZE_DEPS            = 2;
-my $MEDIUM               = 3;
-my $PROVIDES             = 4;
-my $VALUES               = 5;
-my $HEADER               = 6;
-my $INSTALLED_CUMUL_SIZE = 7;
-my $EPOCH                = 8;
-
-#- constant for packing flags, see below.
-my $PKGS_SELECTED  = 0x00ffffff;
-my $PKGS_FORCE     = 0x01000000;
-my $PKGS_INSTALLED = 0x02000000;
-my $PKGS_BASE      = 0x04000000;
-my $PKGS_UPGRADE   = 0x20000000;
-
-#- package to ignore, typically in Application CD.
-my %ignoreBadPkg = (
-		    'civctp-demo'   => 1,
-		    'eus-demo'      => 1,
-		    'myth2-demo'    => 1,
-		    'heretic2-demo' => 1,
-		    'heroes3-demo'  => 1,
-		    'rt2-demo'      => 1,
-		   );
-
-#- basic methods for extracting informations about packages.
-#- to save memory, (name, version, release) are no more stored, they
-#- are directly generated from (file).
-#- all flags are grouped together into (flags), these includes the
-#- following flags : selected, force, installed, base, skip.
-#- size and deps are grouped to save memory too and make a much
-#- simpler and faster depslist reader, this gets (sizeDeps).
-sub packageHeaderFile   { $_[0] ? $_[0]->[$FILE]
-			    : die "invalid package from\n" . backtrace() }
-sub packageName         { $_[0] && $_[0]->[$FILE] =~ /^([^:\s]*)-[^:\-\s]+-[^:\-\s]+\.[^:\.\-\s]*(?::.*)?/ ? $1
-			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-sub packageVersion      { $_[0] && $_[0]->[$FILE] =~ /^[^:\s]*-([^:\-\s]+)-[^:\-\s]+\.[^:\.\-\s]*(?::.*)?/ ? $1
-			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-sub packageRelease      { $_[0] && $_[0]->[$FILE] =~ /^[^:\s]*-[^:\-\s]+-([^:\-\s]+)\.[^:\.\-\s]*(?::.*)?/ ? $1
-			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-sub packageArch         { $_[0] && $_[0]->[$FILE] =~ /^[^:\s]*-[^:\-\s]+-[^:\-\s]+\.([^:\.\-\s]*)(?::.*)?/ ? $1
-			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-sub packageFile         { $_[0] && $_[0]->[$FILE] =~ /^([^:\s]*-[^:\-\s]+-[^:\-\s]+\.[^:\.\-\s]*)(?::(.*))?/ ? ($2 || $1) . ".rpm"
-			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-sub packageEpoch        { $_[0] && $_[0]->[$EPOCH] || 0 }
-
-sub packageSize   { to_int($_[0] && $_[0]->[$SIZE_DEPS]) }
-sub packageDepsId { split ' ', ($_[0] && ($_[0]->[$SIZE_DEPS] =~ /^\d*\s*(.*)/)[0]) }
-
-sub packageFlagSelected  { $_[0] && $_[0]->[$FLAGS] & $PKGS_SELECTED }
-sub packageFlagForce     { $_[0] && $_[0]->[$FLAGS] & $PKGS_FORCE }
-sub packageFlagInstalled { $_[0] && $_[0]->[$FLAGS] & $PKGS_INSTALLED }
-sub packageFlagBase      { $_[0] && $_[0]->[$FLAGS] & $PKGS_BASE }
-sub packageFlagUpgrade   { $_[0] && $_[0]->[$FLAGS] & $PKGS_UPGRADE }
-
-sub packageSetFlagSelected  { $_[0]->[$FLAGS] &= ~$PKGS_SELECTED; $_[0]->[$FLAGS] |= $_[1] & $PKGS_SELECTED; }
-
-sub packageSetFlagForce     { $_[0] or die "invalid package from\n" . backtrace();
-			      $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_FORCE)     : ($_[0]->[$FLAGS] &= ~$PKGS_FORCE); }
-sub packageSetFlagInstalled { $_[0] or die "invalid package from\n" . backtrace();
-			      $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_INSTALLED) : ($_[0]->[$FLAGS] &= ~$PKGS_INSTALLED); }
-sub packageSetFlagBase      { $_[0] or die "invalid package from\n" . backtrace();
-			      $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_BASE)      : ($_[0]->[$FLAGS] &= ~$PKGS_BASE); }
-sub packageSetFlagUpgrade   { $_[0] or die "invalid package from\n" . backtrace();
-			      $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_UPGRADE)   : ($_[0]->[$FLAGS] &= ~$PKGS_UPGRADE); }
-
-sub packageMedium { my ($packages, $p) = @_; $p or die "invalid package from\n" . backtrace();
-		    $packages->{mediums}{$p->[$MEDIUM]} }
-
-sub packageProvides { $_[1] or die "invalid package from\n" . backtrace();
-		      map { $_[0]->{depslist}[$_] || die "unkown package id $_" } unpack "s*", $_[1]->[$PROVIDES] }
-
-sub packageRate          { substr($_[0] && $_[0]->[$VALUES], 0, 1) }
-sub packageRateRFlags    { my ($rate, @flags) = split "\t", $_[0] && $_[0]->[$VALUES]; ($rate, @flags) }
-sub packageSetRateRFlags { my ($pkg, $rate, @flags) = @_; $pkg or die "invalid package from\n" . backtrace();
-			   $pkg->[$VALUES] = join("\t", $rate, @flags) }
-
-sub packageHeader     { $_[0] && $_[0]->[$HEADER] }
-sub packageFreeHeader { $_[0] && c::headerFree(delete $_[0]->[$HEADER]) }
-
-sub packageSelectedOrInstalled { packageFlagSelected($_[0]) || packageFlagInstalled($_[0]) }
-
-sub packageId {
-    my ($packages, $pkg) = @_;
-    my $i = 0;
-    foreach (@{$packages->{depslist}}) { return $i if $pkg == $packages->{depslist}[$i]; $i++ }
-    return;
-}
-
-sub cleanHeaders {
-    my ($prefix) = @_;
-    rm_rf("$prefix/tmp/headers") if -e "$prefix/tmp/headers";
-}
-
-#- get all headers from an hdlist file.
-sub extractHeaders($$$) {
-    my ($prefix, $pkgs, $medium) = @_;
-
-    cleanHeaders($prefix);
-
-    eval {
-	require packdrake;
-	my $packer = new packdrake("/tmp/$medium->{hdlist}", quiet => 1);
-	$packer->extract_archive("$prefix/tmp/headers", map { packageHeaderFile($_) } @$pkgs);
-    };
-
-    foreach (@$pkgs) {
-	my $f = "$prefix/tmp/headers/". packageHeaderFile($_);
-	local *H;
-	open H, $f or log::l("unable to open header file $f: $!"), next;
-	$_->[$HEADER] = c::headerRead(fileno H, 1) or log::l("unable to read header of package ". packageHeaderFile($_));
-    }
-    @$pkgs = grep { $_->[$HEADER] } @$pkgs;
-}
-
-#- size and correction size functions for packages.
-my $B = 1.20873;
-my $C = 4.98663; #- doesn't take hdlist's into account as getAvailableSpace will do it.
-sub correctSize { $B * $_[0] + $C }
-sub invCorrectSize { ($_[0] - $C) / $B }
-
-sub selectedSize {
-    my ($packages) = @_;
-    my $size = 0;
-    foreach (values %{$packages->{names}}) {
-	packageFlagSelected($_) && !packageFlagInstalled($_) and $size += packageSize($_) - ($_->[$INSTALLED_CUMUL_SIZE] || 0);
-    }
-    $size;
-}
-sub correctedSelectedSize { correctSize(selectedSize($_[0]) / sqr(1024)) }
-
-sub size2time {
-    my ($x, $max) = @_;
-    my $A = 7e-07;
-    my $limit = min($max * 3 / 4, 9e8);
-    if ($x < $limit) {
-	$A * $x;
-    } else { 
-	$x -= $limit;
-	my $B = 6e-16;
-	my $C = 15e-07;
-	$B * $x ** 2 + $C * $x + $A * $limit;
-    }
-}
-
-
-#- searching and grouping methods.
-#- package is a reference to list that contains
-#- a hash to search by name and
-#- a list to search by id.
-sub packageByName {
-    my ($packages, $name) = @_;
-    $packages->{names}{$name} or log::l("unknown package `$name'") && undef;
-}
-sub packageById {
-    my ($packages, $id) = @_;
-    my $l = $packages->{depslist}[$id]; #- do not log as id unsupported are still in depslist.
-    $l && @$l && $l;
-}
-sub packagesOfMedium {
-    my ($packages, $medium) = @_;
-    grep { $_ && $_->[$MEDIUM] == $medium } @{$packages->{depslist}};
-}
-sub packagesToInstall {
-    my ($packages) = @_;
-    grep { packageFlagSelected($_) && !packageFlagInstalled($_) &&
-	     packageMedium($packages, $_)->{selected} } values %{$packages->{names}};
-}
-
-sub allMediums {
-    my ($packages) = @_;
-    sort { $a <=> $b } keys %{$packages->{mediums}};
-}
-sub mediumDescr {
-    my ($packages, $medium) = @_;
-    $packages->{mediums}{$medium}{descr};
-}
-
-#- selection, unselection of package.
-sub selectPackage { #($$;$$$)
-    my ($packages, $pkg, $base, $otherOnly, $check_recursion) = @_;
-
-    #- check for medium selection, if the medium has not been
-    #- selected, the package cannot be selected.
-    #- check if the same or better version is installed,
-    #- do not select in such case.
-    $pkg && packageMedium($packages, $pkg)->{selected} && !packageFlagInstalled($pkg) or return;
-
-    #- avoid infinite recursion (mainly against badly generated depslist.ordered).
-    $check_recursion ||= {}; exists $check_recursion->{$pkg->[$FILE]} and return; $check_recursion->{$pkg->[$FILE]} = undef;
-
-    #- make sure base package are set even if already selected.
-    $base and packageSetFlagBase($pkg, 1);
-
-    #- select package and dependancies, otherOnly may be a reference
-    #- to a hash to indicate package that will strictly be selected
-    #- when value is true, may be selected when value is false (this
-    #- is only used for unselection, not selection)
-    unless (packageFlagSelected($pkg)) {
-	foreach (packageDepsId($pkg)) {
-	    if (/\|/) {
-		#- choice deps should be reselected recursively as no
-		#- closure on them is computed, this code is exactly the
-		#- same as pixel's one.
-		my $preferred;	    
-		foreach (split '\|') {
-		    my $dep = packageById($packages, $_) or next;
-		    $preferred ||= $dep;
-		    packageFlagSelected($dep) and $preferred = $dep, last;
-		    exists $preferred{packageName($dep)} and $preferred = $dep;
-		}
-		$preferred or die "unable to find a package for choice";
-		packageFlagSelected($preferred) or log::l("selecting default package as $preferred->[$FILE]");
-		selectPackage($packages, $preferred, $base, $otherOnly, $check_recursion);
-	    } else {
-		#- deps have been closed except for choices, so no need to
-		#- recursively apply selection, expand base on it.
-		my $dep = packageById($packages, $_);
-		$base and packageSetFlagBase($dep, 1);
-		$otherOnly and !packageFlagSelected($dep) and $otherOnly->{packageName($dep)} = 1;
-		$otherOnly or packageSetFlagSelected($dep, 1+packageFlagSelected($dep));
-	    }
-	}
-    }
-    $otherOnly and !packageFlagSelected($pkg) and $otherOnly->{packageName($pkg)} = 1;
-    $otherOnly or packageSetFlagSelected($pkg, 1+packageFlagSelected($pkg));
-    1;
-}
-sub unselectPackage($$;$) {
-    my ($packages, $pkg, $otherOnly) = @_;
-
-    #- base package are not unselectable,
-    #- and already unselected package are no more unselectable.
-    packageFlagBase($pkg) and return;
-    packageFlagSelected($pkg) or return;
-
-    #- dependancies may be used to propose package that may be not
-    #- usefull for the user, since their counter is just one and
-    #- they are not used any more by other packages.
-    #- provides are closed and are taken into account to get possible
-    #- unselection of package (value false on otherOnly) or strict
-    #- unselection (value true on otherOnly).
-    foreach my $provided ($pkg, packageProvides($packages, $pkg)) {
-	packageFlagBase($provided) and die "a provided package cannot be a base package";
-	if (packageFlagSelected($provided)) {
-	    my $unselect_alone = 1;
-	    foreach (packageDepsId($provided)) {
-		$unselect_alone = 0;
-		if (/\|/) {
-		    #- this package use a choice of other package, so we have to check
-		    #- if our package is not included in the choice, if this is the
-		    #- case, if must be checked one of the other package are selected.
-		    foreach (split '\|') {
-			my $dep = packageById($packages, $_) or next;
-			$dep == $pkg and $unselect_alone |= 1 and next;
-			packageFlagBase($dep) || packageFlagSelected($dep) and $unselect_alone |= 2;
-		    }
-		} else {
-		    packageById($packages, $_) == $pkg and $unselect_alone = 1;
-		}
-		$unselect_alone == 1 and last;
-	    }
-	    #- if package has been found and nothing more selected,
-	    #- deselect the provided, or we can ignore it safely.
-	    $provided == $pkg || $unselect_alone == 1 or next;
-	    $otherOnly or packageSetFlagSelected($provided, 0);
-	    $otherOnly and $otherOnly->{packageName($provided)} = 1;
-	}
-	foreach (map { split '\|' } packageDepsId($provided)) {
-	    my $dep = packageById($packages, $_) or next;
-	    packageFlagBase($dep) and next;
-	    packageFlagSelected($dep) or next;
-	    for (packageFlagSelected($dep)) {
-		$_ == 1 and do { $otherOnly and $otherOnly->{packageName($dep)} ||= 0; };
-		$_ >  1 and do { $otherOnly or packageSetFlagSelected($dep, $_-1); };
-		last;
-	    }
-	}
-    }
-    1;
-}
-sub togglePackageSelection($$;$) {
-    my ($packages, $pkg, $otherOnly) = @_;
-    packageFlagSelected($pkg) ? unselectPackage($packages, $pkg, $otherOnly) : selectPackage($packages, $pkg, 0, $otherOnly);
-}
-sub setPackageSelection($$$) {
-    my ($packages, $pkg, $value) = @_;
-    $value ? selectPackage($packages, $pkg) : unselectPackage($packages, $pkg);
-}
-
-sub unselectAllPackages($) {
-    my ($packages) = @_;
-    foreach (values %{$packages->{names}}) {
-	unless (packageFlagBase($_) || packageFlagUpgrade($_)) {
-	    packageSetFlagSelected($_, 0);
-	}
-    }
-}
-sub unselectAllPackagesIncludingUpgradable($) {
-    my ($packages, $removeUpgradeFlag) = @_;
-    foreach (values %{$packages->{names}}) {
-	unless (packageFlagBase($_)) {
-	    packageSetFlagSelected($_, 0);
-	    packageSetFlagUpgrade($_, 0);
-	}
-    }
-}
-
-sub psUpdateHdlistsDeps {
-    my ($prefix, $method) = @_;
-    my $listf = install_any::getFile('Mandrake/base/hdlists') or die "no hdlists found";
-
-    #- WARNING: this function should be kept in sync with functions
-    #- psUsingHdlists and psUsingHdlist.
-    #- it purpose it to update hdlist files on system to install.
-
-    #- parse hdlist.list file.
-    my $medium = 1;
-    foreach (<$listf>) {
-	chomp;
-	s/\s*#.*$//;
-	/^\s*$/ and next;
-	m/^\s*(hdlist\S*\.cz2?)\s+(\S+)\s*(.*)$/ or die "invalid hdlist description \"$_\" in hdlists file";
-	my ($hdlist, $rpmsdir, $descr) = ($1, $2, $3);
-
-	#- copy hdlist file directly to $prefix/var/lib/urpmi, this will be used
-	#- for getting header of package during installation or after by urpmi.
-	my $fakemedium = "$descr ($method$medium)";
-	my $newf = "$prefix/var/lib/urpmi/hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2");
-	-e $newf and do { unlink $newf or die "cannot remove $newf: $!"; };
-	install_any::getAndSaveFile("Mandrake/base/$hdlist", $newf) or die "no $hdlist found";
-	symlinkf $newf, "/tmp/$hdlist";
-	++$medium;
-    }
-
-    #- this is necessary for urpmi.
-    install_any::getAndSaveFile("Mandrake/base/$_", "$prefix/var/lib/urpmi/$_")
-      foreach qw(depslist.ordered provides rpmsrate);
-}
-
-sub psUsingHdlists {
-    my ($prefix, $method) = @_;
-    my $listf = install_any::getFile('Mandrake/base/hdlists') or die "no hdlists found";
-    my %packages = ( names => {}, count => 0, depslist => [], mediums => {});
-
-    #- parse hdlists file.
-    my $medium = 1;
-    foreach (<$listf>) {
-	chomp;
-	s/\s*#.*$//;
-	/^\s*$/ and next;
-	m/^\s*(hdlist\S*\.cz2?)\s+(\S+)\s*(.*)$/ or die "invalid hdlist description \"$_\" in hdlists file";
-
-	#- make sure the first medium is always selected!
-	#- by default select all image.
-	psUsingHdlist($prefix, $method, \%packages, $1, $medium, $2, $3, 1);
-
-	++$medium;
-    }
-
-    log::l("psUsingHdlists read " . scalar keys(%{$packages{names}}) .
-	   " headers on " . scalar keys(%{$packages{mediums}}) . " hdlists");
-
-    \%packages;
-}
-
-sub psUsingHdlist {
-    my ($prefix, $method, $packages, $hdlist, $medium, $rpmsdir, $descr, $selected, $fhdlist) = @_;
-    my $fakemedium = "$descr ($method$medium)";
-    log::l("trying to read $hdlist for medium $medium");
-
-    #- if the medium already exist, use it.
-    $packages->{mediums}{$medium} and return;
-
-    my $m = $packages->{mediums}{$medium} = { hdlist     => $hdlist,
-					      method     => $method,
-					      medium     => $medium,
-					      rpmsdir    => $rpmsdir, #- where is RPMS directory.
-					      descr      => $descr,
-					      fakemedium => $fakemedium,
-					      min        => $packages->{count},
-					      max        => -1, #- will be updated after reading current hdlist.
-					      selected   => $selected, #- default value is only CD1, it is really the minimal.
-					    };
-
-    #- copy hdlist file directly to $prefix/var/lib/urpmi, this will be used
-    #- for getting header of package during installation or after by urpmi.
-    my $newf = "$prefix/var/lib/urpmi/hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2");
-    -e $newf and do { unlink $newf or die "cannot remove $newf: $!"; };
-    install_any::getAndSaveFile($fhdlist || "Mandrake/base/$hdlist", $newf) or die "no $hdlist found";
-    symlinkf $newf, "/tmp/$hdlist";
-
-    #- avoid using more than one medium if Cd is not ejectable.
-    #- but keep all medium here so that urpmi has the whole set.
-    $method eq 'cdrom' && $medium > 1 && !common::usingRamdisk() and return;
-
-    #- extract filename from archive, this take advantage of verifying
-    #- the archive too.
-    eval {
-	require packdrake;
-	my $packer = new packdrake($newf, quiet => 1);
-	foreach (@{$packer->{files}}) {
-	    $packer->{data}{$_}[0] eq 'f' or next;
-	    ++$packages->{count}; #- take care of this one, so that desplist will be clean with index of package.
-	    my $pkg = [ (undef) x 8 ]; $pkg->[$FILE] = $_; $pkg->[$MEDIUM] = $medium;
-	    my $specific_arch = packageArch($pkg);
-	    if (!$specific_arch || MDK::Common::System::compat_arch($specific_arch)) {
-		my $old_pkg = $packages->{names}{packageName($pkg)};
-		if ($old_pkg) {
-		    if (packageVersion($pkg) eq packageVersion($old_pkg) && packageRelease($pkg) eq packageRelease($old_pkg)) {
-			if (MDK::Common::System::better_arch($specific_arch, packageArch($old_pkg))) {
-			    log::l("replacing old package with package $_ with better arch: $specific_arch");
-			    $packages->{names}{packageName($pkg)} = $pkg;
-			} else {
-			    log::l("keeping old package against package $_ with worse arch");
-			}
-		    } else {
-		        log::l("ignoring package $_ already present in distribution with different version or release");
-		    }
-		} else {
-		    $packages->{names}{packageName($pkg)} = $pkg;
-		}
-	    } else {
-	        log::l("ignoring package $_ with incompatible arch: $specific_arch");
-	    }
-	}
-    };
-
-    #- update maximal index.
-    $m->{max} = $packages->{count} - 1;
-    $m->{max} >= $m->{min} or die "nothing found while parsing $newf";
-    log::l("read " . ($m->{max} - $m->{min} + 1) . " headers in $hdlist");
-    1;
-}
-
-sub getOtherDeps($$) {
-    my ($packages, $f) = @_;
-
-    #- this version of getDeps is customized for handling errors more easily and
-    #- convert reference by name to deps id including closure computation.
-    local $_;
-    while (<$f>) {
-	my ($name, $version, $release, $size, $deps) = /^(\S*)-([^-\s]+)-([^-\s]+)\s+(\d+)\s+(.*)/;
-	my $pkg = $packages->{names}{$name};
-
-	$pkg or log::l("ignoring package $name-$version-$release in depslist is not in hdlist"), next;
-	$version eq packageVersion($pkg) and $release eq packageRelease($pkg)
-	  or log::l("warning package $name-$version-$release in depslist mismatch version or release in hdlist ($version ne ",
-		    packageVersion($pkg), " or $release ne ", packageRelease($pkg), ")"), next;
-
-	my $index = scalar @{$packages->{depslist}};
-	$index >= packageMedium($packages, $pkg)->{min} && $index <= packageMedium($packages, $pkg)->{max}
-	  or log::l("ignoring package $name-$version-$release in depslist outside of hdlist indexation");
-
-	#- here we have to translate referenced deps by name to id.
-	#- this include a closure on deps too.
-	my %closuredeps;
-	@closuredeps{map { packageId($packages, $_), packageDepsId($_) }
-		       grep { $_ }
-			 map { packageByName($packages, $_) or do { log::l("unknown package $_ in depslist for closure"); undef } }
-			   split /\s+/, $deps} = ();
-
-	$pkg->[$SIZE_DEPS] = join " ", $size, keys %closuredeps;
-
-	push @{$packages->{depslist}}, $pkg;
-    }
-
-    #- check for same number of package in depslist and hdlists, avoid being to hard.
-    scalar(keys %{$packages->{names}}) == scalar(@{$packages->{depslist}})
-      or log::l("other depslist has not same package as hdlist file");
-}
-
-sub getDeps {
-    my ($prefix, $packages) = @_;
-
-    #- this is necessary for urpmi.
-    install_any::getAndSaveFile('Mandrake/base/depslist.ordered', "$prefix/var/lib/urpmi/depslist.ordered");
-    install_any::getAndSaveFile('Mandrake/base/provides', "$prefix/var/lib/urpmi/provides");
-
-    #- beware of heavily mismatching depslist.ordered file against hdlist files.
-    my $mismatch = 0;
-
-    #- count the number of packages in deplist that are also in hdlist
-    my $nb_deplist = 0;
-
-    #- update dependencies list, provides attributes are updated later
-    #- cross reference to be resolved on id (think of loop requires)
-    #- provides should be updated after base flag has been set to save
-    #- memory.
-    local *F; open F, "$prefix/var/lib/urpmi/depslist.ordered" or die "can't find dependancies list";
-    local $_;
-    while (<F>) {
-	my ($name, $version, $release, $arch, $epoch, $sizeDeps) =
-	  /^([^:\s]*)-([^:\-\s]+)-([^:\-\s]+)\.([^:\.\-\s]*)(?::(\d+)\S*)?\s+(.*)/;
-	my $pkg = $packages->{names}{$name};
-
-	#- these verification are necessary in case of error, but are no more fatal as
-	#- in case of only one medium taken into account during install, there should be
-	#- silent warning for package which are unknown at this point.
-	$pkg or
-	  log::l("ignoring $name-$version-$release.$arch in depslist is not in hdlist");
-	$pkg && $version ne packageVersion($pkg) and
-	  log::l("ignoring $name-$version-$release.$arch in depslist mismatch version in hdlist"), $pkg = undef;
-	$pkg && $release ne packageRelease($pkg) and
-	  log::l("ignoring $name-$version-$release.$arch in depslist mismatch release in hdlist"), $pkg = undef;
-	$pkg && $arch ne packageArch($pkg) and
-	  log::l("ignoring $name-$version-$release.$arch in depslist mismatch arch in hdlist"), $pkg = undef;
-
-	if ($pkg) {
-	    $nb_deplist++;
-	    $epoch && $epoch > 0 and $pkg->[$EPOCH] = $epoch; #- only 5% of the distribution use epoch (serial).
-	    $pkg->[$SIZE_DEPS] = $sizeDeps;
-
-	    #- check position of package in depslist according to precomputed
-	    #- limit by hdlist, very strict :-)
-	    #- above warning have chance to raise an exception here, but may help
-	    #- for debugging.
-	    my $i = scalar @{$packages->{depslist}};
-	    $i >= packageMedium($packages, $pkg)->{min} && $i <= packageMedium($packages, $pkg)->{max} or
-	      log::l("inconsistency in position for $name-$version-$release.$arch in depslist and hdlist"), $mismatch = 1;
-	}
-
-	#- package are already sorted in depslist to enable small transaction and multiple medium.
-	push @{$packages->{depslist}}, $pkg;
-    }
-
-    #- check for mismatching package, it should break with above die unless depslist has too many errors!
-    $mismatch and die "depslist.ordered mismatch against hdlist files";
-
-    #- check for same number of package in depslist and hdlists.
-    my $nb_hdlist = keys %{$packages->{names}};
-    $nb_hdlist == $nb_deplist or die "depslist.ordered has not same package as hdlist files ($nb_deplist != $nb_hdlist)";
-}
-
-sub getProvides($) {
-    my ($packages) = @_;
-
-    #- update provides according to dependencies, here are stored
-    #- reference to package directly and choice are included, this
-    #- assume only 1 of the choice is selected, else on unselection
-    #- the provided package will be deleted where other package still
-    #- need it.
-    #- base package are not updated because they cannot be unselected,
-    #- this save certainly a lot of memory since most of them may be
-    #- needed by a large number of package.
-    #- now using a packed of signed short, this means no more than 32768
-    #- packages can be managed by DrakX (currently about 2000).
-    my $i = 0;
-    foreach my $pkg (@{$packages->{depslist}}) {
-	$pkg or next;
-	unless (packageFlagBase($pkg)) {
-	    foreach (map { split '\|' } grep { !/^NOTFOUND_/ } packageDepsId($pkg)) {
-		my $provided = packageById($packages, $_) or next;
-		packageFlagBase($provided) or $provided->[$PROVIDES] = pack "s*", (unpack "s*", $provided->[$PROVIDES]), $i;
-	    }
-	}
-	++$i;
-    }
-}
-
-sub read_rpmsrate {
-    my ($packages, $f) = @_;
-    my $line_nb = 0;
-    my $fatal_error;
-    my (@l);
-    while (<$f>) {
-	$line_nb++;
-	/\t/ and die "tabulations not allowed at line $line_nb\n";
-	s/#.*//; # comments
-
-	my ($indent, $data) = /(\s*)(.*)/;
-	next if !$data; # skip empty lines
-
-	@l = grep { $_->[0] < length $indent } @l;
-
-	my @m = @l ? @{$l[$#l][1]} : ();
-	my ($t, $flag, @l2);
-	while ($data =~ 
-	       /^((
-                   [1-5]
-                   |
-                   (?:            (?: !\s*)? [0-9A-Z_]+(?:".*?")?)
-                   (?: \s*\|\|\s* (?: !\s*)? [0-9A-Z_]+(?:".*?")?)*
-                  )
-                  (?:\s+|$)
-                 )(.*)/x) { #@")) {
-	    ($t, $flag, $data) = ($1,$2,$3);
-	    while ($flag =~ s,^\s*(("[^"]*"|[^"\s]*)*)\s+,$1,) {}
-	    my $ok = 0;
-	    $flag = join('||', grep { 
-		if (my ($inv, $p) = /^(!)?HW"(.*)"/) {
-		    ($inv xor detect_devices::matching_desc($p)) and $ok = 1;
-		    0;
-		} else {
-		    1;
-		}
-	    } split '\|\|', $flag);
-	    push @m, $ok ? 'TRUE' : $flag || 'FALSE';
-	    push @l2, [ length $indent, [ @m ] ];
-	    $indent .= $t;
-	}
-	if ($data) {
-	    # has packages on same line
-	    my ($rate) = grep { /^\d$/ } @m or die sprintf qq(missing rate for "%s" at line %d (flags are %s)\n), $data, $line_nb, join('&&', @m);
-	    foreach (split ' ', $data) {
-		if ($packages) {
-		    my $p = packageByName($packages, $_) or next;
-		    
-		    my @m2 = 
-		      map { if_($_ && packageName($_) =~ /locales-(.*)/, qq(LOCALES"$1")) }
-		      map { packageById($packages, $_) } packageDepsId($p);
-
-		    my @m3 = ((grep { !/^\d$/ } @m), @m2);
-		    if (packageRate($p)) {
-			next if @m3 == 1 && $m3[0] eq 'INSTALL';
-
-			my ($rate2, @m4) = packageRateRFlags($p);
-			if (@m3 > 1 || @m4 > 1) {
-			    log::l("can't handle complicate flags for packages appearing twice ($_)");
-			    $fatal_error++;
-			}
-			log::l("package $_ appearing twice with different rates ($rate != $rate2)") if $rate != $rate2;
-			packageSetRateRFlags($p, $rate, "$m3[0]||$m4[0]");
-		    } else {
-			packageSetRateRFlags($p, $rate, @m3);
-		    }
-		} else {
-		    print "$_ = ", join(" && ", @m), "\n";
-		}
-	    }
-	    push @l, @l2;
-	} else {
-	    push @l, [ $l2[0][0], $l2[$#l2][1] ];
-	}
-    }
-    $fatal_error and die "$fatal_error fatal errors in rpmsrate";
-}
-
-sub readCompssUsers {
-    my ($meta_class) = @_;
-    my (%compssUsers, @sorted, $l);
-
-    my $file = 'Mandrake/base/compssUsers';
-    my $f = $meta_class && install_any::getFile("$file.$meta_class") || install_any::getFile($file) or die "can't find $file";
-    local $_;
-    while (<$f>) {
-	/^\s*$/ || /^#/ and next;
-	s/#.*//;
-
-	if (/^(\S.*)/) {
-	    my $verbatim = $_;
-	    my ($icon, $descr, $path);
-	    /^(.*?)\s*\[path=(.*?)\](.*)/  and $_ = "$1$3", $path  = $2;
-	    /^(.*?)\s*\[icon=(.*?)\](.*)/  and $_ = "$1$3", $icon  = $2;
-	    /^(.*?)\s*\[descr=(.*?)\](.*)/ and $_ = "$1$3", $descr = $2;
-	    $compssUsers{"$path|$_"} = { label => $_, verbatim => $verbatim, path => $path, icons => $icon, descr => $descr, flags => $l=[] };
-	    push @sorted, "$path|$_";
-	} elsif (/^\s+(.*?)\s*$/) {
-	    push @$l, $1;
-	}
-    }
-    \%compssUsers, \@sorted;
-}
-sub saveCompssUsers {
-    my ($prefix, $packages, $compssUsers, $sorted) = @_;
-    my $flat;
-    foreach (@$sorted) {
-	my @fl = @{$compssUsers->{$_}{flags}};
-	my %fl; $fl{$_} = 1 foreach @fl;
-	$flat .= $compssUsers->{$_}{verbatim};
-	foreach my $p (values %{$packages->{names}}) {
-	    my ($rate, @flags) = packageRateRFlags($p);
-	    if ($rate && grep { grep { !/^!/ && $fl{$_} } split('\|\|') } @flags) {
-		$flat .= sprintf "\t%d %s\n", $rate, packageName($p);
-	    }
-	}
-    }
-    output "$prefix/var/lib/urpmi/compssUsers.flat", $flat;
-}
-
-sub setSelectedFromCompssList {
-    my ($packages, $compssUsersChoice, $min_level, $max_size) = @_;
-    $compssUsersChoice->{TRUE} = 1; #- ensure TRUE is set
-    my $nb = selectedSize($packages);
-    foreach my $p (sort { packageRate($b) <=> packageRate($a) } values %{$packages->{names}}) {
-	my ($rate, @flags) = packageRateRFlags($p);
-	next if 
-	  !$rate || $rate < $min_level || 
-	  grep { !grep { /^!(.*)/ ? !$compssUsersChoice->{$1} : $compssUsersChoice->{$_} } split('\|\|') } @flags;
-
-	#- determine the packages that will be selected when
-	#- selecting $p. the packages are not selected.
-	my %newSelection;
-	selectPackage($packages, $p, 0, \%newSelection);
-
-	#- this enable an incremental total size.
-	my $old_nb = $nb;
-	foreach (grep { $newSelection{$_} } keys %newSelection) {
-	    $nb += packageSize($packages->{names}{$_});
-	}
-	if ($max_size && $nb > $max_size) {
-	    $nb = $old_nb;
-	    $min_level = packageRate($p);
-	    last;
-	}
-
-	#- at this point the package can safely be selected.
-	selectPackage($packages, $p);
-    }
-    log::l("setSelectedFromCompssList: reached size ", formatXiB($nb), ", up to indice $min_level (less than ", formatXiB($max_size), ")");
-    log::l("setSelectedFromCompssList: ", join(" ", sort map { packageName($_) } grep { packageFlagSelected($_) } @{$packages->{depslist}}));
-    $min_level;
-}
-
-#- usefull to know the size it would take for a given min_level/max_size
-#- just saves the selected packages, call setSelectedFromCompssList and restores the selected packages
-sub saveSelected {
-    my ($packages) = @_;
-    my @l = values %{$packages->{names}};
-    my @flags = map { packageFlagSelected($_) } @l;
-    [ $packages, \@l, \@flags ];
-}
-sub restoreSelected {
-    my ($packages, $l, $flags) = @{$_[0]};
-    mapn { packageSetFlagSelected(@_) } $l, $flags;
-}
-
-sub computeGroupSize {
-    my ($packages, $min_level) = @_;
-
-    sub inside {
-	my ($l1, $l2) = @_;
-	my $i = 0;
-	return if @$l1 > @$l2;
-	foreach (@$l1) {
-	    my $c;
-	    while ($c = $l2->[$i++] cmp $_ ) {
-		return if $c == 1 || $i > @$l2;
-	    }
-	}
-	1;
-    }
-
-    sub or_ify {
-	my ($first, @other) = @_;
-	my @l = split('\|\|', $first);
-	foreach (@other) {
-	    @l = map {
-		my $n = $_;
-		map { "$_&&$n" } @l;
-	    } split('\|\|');
-	}
-	#- HACK, remove LOCALES & CHARSET, too costly
-	grep { !/LOCALES|CHARSET/ } @l;
-    }
-    sub or_clean {
-	my (@l) = map { [ sort split('&&') ] } @_ or return '';
-	my @r;
-	B: while (@l) {
-	    my $e = shift @l;
-	    foreach (@r, @l) {
-		inside($e, $_) and next B;
-	    }
-	    push @r, $e;
-	}
-	join("\t", map { join('&&', @$_) } @r);
-    }
-    my (%group, %memo);
-
-    foreach my $p (values %{$packages->{names}}) {
-	my ($rate, @flags) = packageRateRFlags($p);
-	next if !$rate || $rate < $min_level;
-
-	my $flags = join("\t", @flags = or_ify(@flags));
-	$group{packageName($p)} = ($memo{$flags} ||= or_clean(@flags));
-
-	#- determine the packages that will be selected when selecting $p. the packages are not selected.
-	my %newSelection;
-	selectPackage($packages, $p, 0, \%newSelection);
-	foreach (grep { $newSelection{$_} } keys %newSelection) {
-	    my $s = $group{$_} || do {
-		$packages->{names}{$_}[$VALUES] =~ /\t(.*)/;
-		join("\t", or_ify(split("\t", $1)));
-	    };
-	    next if length($s) > 80; # HACK, truncated too complicated expressions, too costly
-	    my $m = "$flags\t$s";
-	    $group{$_} = ($memo{$m} ||= or_clean(@flags, split("\t", $s)));
-	}
-    }
-    my (%sizes, %pkgs);
-    while (my ($k, $v) = each %group) {
-	push @{$pkgs{$v}}, $k;
-	$sizes{$v} += packageSize($packages->{names}{$k});
-    }
-    log::l(sprintf "%s %dMB %s", $_, $sizes{$_} / sqr(1024), join(',', @{$pkgs{$_}})) foreach keys %sizes;
-    \%sizes, \%pkgs;
-}
-
-
-sub init_db {
-    my ($prefix) = @_;
-
-    my $f = "$prefix/root/install.log";
-    open(LOG, ">> $f") ? log::l("opened $f") : log::l("Failed to open $f. No install log will be kept.");
-    *LOG or *LOG = log::F() or *LOG = *STDERR;
-    CORE::select((CORE::select(LOG), $| = 1)[0]);
-    c::rpmErrorSetCallback(fileno LOG);
-#-    c::rpmSetVeryVerbose();
-
-    log::l("reading /usr/lib/rpm/rpmrc");
-    c::rpmReadConfigFiles() or die "can't read rpm config files";
-    log::l("\tdone");
-}
-
-sub rebuild_db_open_for_traversal {
-    my ($packages, $prefix) = @_;
-
-    log::l("reading /usr/lib/rpm/rpmrc");
-    c::rpmReadConfigFiles() or die "can't read rpm config files";
-    log::l("\tdone");
-
-    unless (exists $packages->{rebuild_db}) {
-	if (my $pid = fork()) {
-	    waitpid $pid, 0;
-	    ($? & 0xff00) and die "rebuilding of rpm database failed";
-	} else {
-	    log::l("rebuilding rpm database");
-	    my $rebuilddb_dir = "$prefix/var/lib/rpmrebuilddb.$$";
-	    -d $rebuilddb_dir and log::l("removing stale directory $rebuilddb_dir"), rm_rf($rebuilddb_dir);
-
-	    c::rpmdbRebuild($prefix) or log::l("rebuilding of rpm database failed: ". c::rpmErrorString()), c::_exit(2);
-
-	    c::_exit(0);
-	}
-	$packages->{rebuild_db} = undef;
-    }
-
-    my $db = c::rpmdbOpenForTraversal($prefix) or die "unable to open $prefix/var/lib/rpm/Packages";
-    log::l("opened rpm database for examining existing packages");
-
-    $db;
-}
-
-sub clean_old_rpm_db {
-    my ($prefix) = @_;
-    my $failed;
-
-    foreach (qw(Basenames Conflictname Group Name Packages Providename Requirename Triggername)) {
-	-s "$prefix/var/lib/rpm/$_" or $failed = 'failed';
-    }
-    #- rebuilding has been successfull, so remove old rpm database if any.
-    #- once we have checked the rpm4 db file are present and not null, in case
-    #- of doubt, avoid removing them...
-    unless ($failed) {
-	log::l("rebuilding rpm database completed successfully");
-	foreach (qw(conflictsindex.rpm fileindex.rpm groupindex.rpm nameindex.rpm packages.rpm
-                    providesindex.rpm requiredby.rpm triggerindex.rpm)) {
-	    -e "$prefix/var/lib/rpm/$_" or next;
-	    log::l("removing old rpm file $_");
-	    rm_rf("$prefix/var/lib/rpm/$_");
-	}
-    }
-}
-
-sub done_db {
-    log::l("closing install.log file");
-    close LOG;
-}
-
-sub versionCompare($$) {
-    my ($a, $b) = @_;
-    local $_;
-
-    while ($a || $b) {
-	my ($sb, $sa) =  map { $1 if $a =~ /^\W*\d/ ? s/^\W*0*(\d+)// : s/^\W*(\D*)// } ($b, $a);
-	$_ = ($sa =~ /^\d/ || $sb =~ /^\d/) && length($sa) <=> length($sb) || $sa cmp $sb and return $_ || 0;
-	$sa eq '' && $sb eq '' and return $a cmp $b || 0;
-    }
-}
-
-sub selectPackagesAlreadyInstalled {
-    my ($packages, $prefix) = @_;
-
-    #- avoid rebuilding the database if such case.
-    $packages->{rebuild_db} = "oem does not need rebuilding the rpm db";
-    my $db = rebuild_db_open_for_traversal($packages, $prefix);
-
-    #- this method has only one objectif, check the presence of packages
-    #- already installed and avoid installing them again. this is to be used
-    #- with oem installation, if the database exists, preselect the packages
-    #- installed WHATEVER their version/release (log if a problem is perceived
-    #- is enough).
-    c::rpmdbTraverse($db, sub {
-			 my ($header) = @_;
-			 my $p = $packages->{names}{c::headerGetEntry($header, 'name')};
-
-			 if ($p) {
-			     my $epoch_cmp = c::headerGetEntry($header, 'epoch') <=> packageEpoch($p);
-			     my $version_cmp = $epoch_cmp == 0 && versionCompare(c::headerGetEntry($header, 'version'),
-										 packageVersion($p));
-			     my $version_rel_test = $epoch_cmp > 0 || $epoch_cmp == 0 &&
-			       ($version_cmp > 0 || $version_cmp == 0 &&
-				versionCompare(c::headerGetEntry($header, 'release'), packageRelease($p)) >= 0);
-			     $version_rel_test or log::l("keeping an older package, avoiding selecting $p->[$FILE]");
-			     packageSetFlagInstalled($p, 1);
-			 }
-		     });
-
-    #- close db, job finished !
-    c::rpmdbClose($db);
-    log::l("done selecting packages to upgrade");
-}
-
-sub selectPackagesToUpgrade($$$;$$) {
-    my ($packages, $prefix, $base, $toRemove, $toSave) = @_;
-    local $_; #- else perl complains on the map { ... } grep { ... } @...;
-
-    local (*UPGRADE_INPUT, *UPGRADE_OUTPUT); pipe UPGRADE_INPUT, UPGRADE_OUTPUT;
-    if (my $pid = fork()) {
-	@{$toRemove || []} = (); #- reset this one.
-
-	close UPGRADE_OUTPUT;
-	while (<UPGRADE_INPUT>) {
-	    chomp;
-	    my ($action, $name) = /^([\w\d]*):(.*)/;
-	    for ($action) {
-		/remove/    and do { push @$toRemove, $name; next };
-		/keepfiles/ and do { push @$toSave, $name; next };
-
-		my $p = $packages->{names}{$name} or die "unable to find package ($name)";
-		/^\d*$/     and do { $p->[$INSTALLED_CUMUL_SIZE] = $action; next };
-		/installed/ and do { packageSetFlagInstalled($p, 1); next };
-		/select/    and do { selectPackage($packages, $p); next };
-
-		die "unknown action ($action)";
-	    }
-	}
-	close UPGRADE_INPUT;
-	waitpid $pid, 0;
-    } else {
-	close UPGRADE_INPUT;
-	
-	my $db = rebuild_db_open_for_traversal($packages, $prefix);
-	#- used for package that are not correctly updated.
-	#- should only be used when nothing else can be done correctly.
-	my %upgradeNeedRemove = (
-				 'libstdc++' => 1,
-				 'compat-glibc' => 1,
-				 'compat-libs' => 1,
-				);
-
-	#- generel purpose for forcing upgrade of package whatever version is.
-	my %packageNeedUpgrade = (
-				  #'lilo' => 1, #- this package has been misnamed in 7.0.
-				 );
-
-	#- help removing package which may have different release numbering
-	my %toRemove; map { $toRemove{$_} = 1 } @{$toRemove || []};
-
-	#- help searching package to upgrade in regard to already installed files.
-	my %installedFilesForUpgrade;
-
-	#- help keeping memory by this set of package that have been obsoleted.
-	my %obsoletedPackages;
-
-	#- make a subprocess here for reading filelist, this is important
-	#- not to waste a lot of memory for the main program which will fork
-	#- latter for each transaction.
-	local (*INPUT, *OUTPUT_CHILD); pipe INPUT, OUTPUT_CHILD;
-	local (*INPUT_CHILD, *OUTPUT); pipe INPUT_CHILD, OUTPUT;
-	if (my $pid = fork()) {
-	    close INPUT_CHILD;
-	    close OUTPUT_CHILD;
-	    select((select(OUTPUT), $| = 1)[0]);
-
-	    #- internal reading from interactive mode of parsehdlist.
-	    #- takes a code to call with the line read, this avoid allocating
-	    #- memory for that.
-	    my $ask_child = sub {
-		my ($name, $tag, $code) = @_;
-		$code or die "no callback code for parsehdlist output";
-		print OUTPUT "$name:$tag\n";
-
-		local $_;
-		while (<INPUT>) {
-		    chomp;
-		    /^\s*$/ and last;
-		    $code->($_);
-		}
-	    };
-
-	    #- select packages which obseletes other package, obselete package are not removed,
-	    #- should we remove them ? this could be dangerous !
-	    foreach my $p (values %{$packages->{names}}) {
-		$ask_child->(packageName($p), "obsoletes", sub {
-				 #- take care of flags and version and release if present
-				 if ($_[0] =~ /^(\S*)\s*(\S*)\s*([^\s-]*)-?(\S*)/ && c::rpmdbNameTraverse($db, $1) > 0) {
-				     $3 and eval(versionCompare(packageVersion($p), $3) . $2 . 0) or next;
-				     $4 and eval(versionCompare(packageRelease($p), $4) . $2 . 0) or next;
-				     log::l("selecting " . packageName($p) . " by selection on obsoletes");
-				     $obsoletedPackages{$1} = undef;
-				     selectPackage($packages, $p);
-				 }
-			     });
-	    }
-
-	    #- mark all files which are not in /etc/rc.d/ for packages which are already installed but which
-	    #- are not in the packages list to upgrade.
-	    #- the 'installed' property will make a package unable to be selected, look at select.
-	    c::rpmdbTraverse($db, sub {
-				 my ($header) = @_;
-				 my $otherPackage = (c::headerGetEntry($header, 'release') !~ /mdk\w*$/ &&
-						     (c::headerGetEntry($header, 'name'). '-' .
-						      c::headerGetEntry($header, 'version'). '-' .
-						      c::headerGetEntry($header, 'release')));
-				 my $p = $packages->{names}{c::headerGetEntry($header, 'name')};
-
-				 if ($p) {
-				     my $epoch_cmp = c::headerGetEntry($header, 'epoch') <=> packageEpoch($p);
-				     my $version_cmp = $epoch_cmp == 0 && versionCompare(c::headerGetEntry($header, 'version'),
-											 packageVersion($p));
-				     my $version_rel_test = $epoch_cmp > 0 || $epoch_cmp == 0 &&
-				       ($version_cmp > 0 || $version_cmp == 0 &&
-					versionCompare(c::headerGetEntry($header, 'release'), packageRelease($p)) >= 0);
-				     if ($packageNeedUpgrade{packageName($p)}) {
-					 log::l("package ". packageName($p) ." need to be upgraded");
-				     } elsif ($version_rel_test) { #- by default, package are upgraded whatever version is !
-					 if ($otherPackage && $version_cmp <= 0) {
-					     log::l("force upgrading $otherPackage since it will not be updated otherwise");
-					 } else {
-					     #- let the parent known this installed package.
-					     print UPGRADE_OUTPUT "installed:" . packageName($p) . "\n";
-					     packageSetFlagInstalled($p, 1);
-					 }
-				     } elsif ($upgradeNeedRemove{packageName($p)}) {
-					 my $otherPackage = (c::headerGetEntry($header, 'name'). '-' .
-							     c::headerGetEntry($header, 'version'). '-' .
-							     c::headerGetEntry($header, 'release'));
-					 log::l("removing $otherPackage since it will not upgrade correctly!");
-					 $toRemove{$otherPackage} = 1; #- force removing for theses other packages, select our.
-				     }
-				 } else {
-				     if (! exists $obsoletedPackages{c::headerGetEntry($header, 'name')}) {
-					 my @files = c::headerGetEntry($header, 'filenames');
-					 @installedFilesForUpgrade{grep { ($_ !~ m|^/dev/| && $_ !~ m|^/etc/rc.d/| && $_ !~ m|\.la$| &&
-									   ! -d "$prefix/$_" && ! -l "$prefix/$_") } @files} = ();
-				     }
-				 }
-			     });
-
-	    #- find new packages to upgrade.
-	    foreach my $p (values %{$packages->{names}}) {
-		my $skipThis = 0;
-		my $count = c::rpmdbNameTraverse($db, packageName($p), sub {
-						     my ($header) = @_;
-						     $skipThis ||= packageFlagInstalled($p);
-						 });
-
-		#- skip if not installed (package not found in current install).
-		$skipThis ||= ($count == 0);
-
-		#- make sure to upgrade package that have to be upgraded.
-		$packageNeedUpgrade{packageName($p)} and $skipThis = 0;
-
-		#- select the package if it is already installed with a lower version or simply not installed.
-		unless ($skipThis) {
-		    my $cumulSize;
-
-		    selectPackage($packages, $p);
-
-		    #- keep in mind installed files which are not being updated. doing this costs in
-		    #- execution time but use less memory, else hash all installed files and unhash
-		    #- all file for package marked for upgrade.
-		    c::rpmdbNameTraverse($db, packageName($p), sub {
-					     my ($header) = @_;
-					     $cumulSize += c::headerGetEntry($header, 'size');
-					     my @files = c::headerGetEntry($header, 'filenames');
-					     @installedFilesForUpgrade{grep { ($_ !~ m|^/dev/| && $_ !~ m|^/etc/rc.d/| && $_ !~ m|\.la$| &&
-									   ! -d "$prefix/$_" && ! -l "$prefix/$_") } @files} = ();
-					 });
-
-		    $ask_child->(packageName($p), "files", sub {
-				     delete $installedFilesForUpgrade{$_[0]};
-				 });
-
-		    #- keep in mind the cumul size of installed package since they will be deleted
-		    #- on upgrade, only for package that are allowed to be upgraded.
-		    if (allowedToUpgrade(packageName($p))) {
-			print UPGRADE_OUTPUT "$cumulSize:" . packageName($p) . "\n";
-		    }
-		}
-	    }
-
-	    #- unmark all files for all packages marked for upgrade. it may not have been done above
-	    #- since some packages may have been selected by depsList.
-	    foreach my $p (values %{$packages->{names}}) {
-		if (packageFlagSelected($p)) {
-		    $ask_child->(packageName($p), "files", sub {
-				     delete $installedFilesForUpgrade{$_[0]};
-				 });
-		}
-	    }
-
-	    #- select packages which contains marked files, then unmark on selection.
-	    #- a special case can be made here, the selection is done only for packages
-	    #- requiring locales if the locales are selected.
-	    #- another special case are for devel packages where fixes over the time has
-	    #- made some files moving between the normal package and its devel couterpart.
-	    #- if only one file is affected, no devel package is selected.
-	    foreach my $p (values %{$packages->{names}}) {
-		unless (packageFlagSelected($p)) {
-		    my $toSelect = 0;
-		    $ask_child->(packageName($p), "files", sub {
-				     if ($_[0] !~ m|^/dev/| && $_[0] !~  m|^/etc/rc.d/| &&  $_ !~ m|\.la$| && exists $installedFilesForUpgrade{$_[0]}) {
-					 ++$toSelect if ! -d "$prefix/$_[0]" && ! -l "$prefix/$_[0]";
-				     }
-				     delete $installedFilesForUpgrade{$_[0]};
-				 });
-		    if ($toSelect) {
-			if ($toSelect <= 1 && packageName($p) =~ /-devel/) {
-			    log::l("avoid selecting " . packageName($p) . " as not enough files will be updated");
-			} else {
-			    #- default case is assumed to allow upgrade.
-			    my @deps = map { my $p = packageById($packages, $_);
-					     if_($p && packageName($p) =~ /locales-/, $p) } packageDepsId($p);
-			    if (@deps == 0 || @deps > 0 && (grep { !packageFlagSelected($_) } @deps) == 0) {
-				log::l("selecting " . packageName($p) . " by selection on files");
-				selectPackage($packages, $p);
-			    } else {
-				log::l("avoid selecting " . packageName($p) . " as its locales language is not already selected");
-			    }
-			}
-		    }
-		}
-	    }
-
-	    #- clean memory...
-	    %installedFilesForUpgrade = ();
-
-	    #- no need to still use the child as this point, we can let him to terminate.
-	    close OUTPUT;
-	    close INPUT;
-	    waitpid $pid, 0;
-	} else {
-	    close INPUT;
-	    close OUTPUT;
-	    open STDIN, "<&INPUT_CHILD";
-	    open STDOUT, ">&OUTPUT_CHILD";
-	    exec if_($ENV{LD_LOADER}, $ENV{LD_LOADER}), "parsehdlist", "--interactive", map { "/tmp/$_->{hdlist}" } values %{$packages->{mediums}}
-	      or c::_exit(1);
-	}
-
-	#- let the parent known about what we found here!
-	foreach my $p (values %{$packages->{names}}) {
-	    print UPGRADE_OUTPUT "select:" . packageName($p) . "\n" if packageFlagSelected($p);
-	}
-
-	#- clean false value on toRemove.
-	delete $toRemove{''};
-
-	#- get filenames that should be saved for packages to remove.
-	#- typically config files, but it may broke for packages that
-	#- are very old when compabilty has been broken.
-	#- but new version may saved to .rpmnew so it not so hard !
-	if ($toSave && keys %toRemove) {
-	    c::rpmdbTraverse($db, sub {
-				 my ($header) = @_;
-				 my $otherPackage = (c::headerGetEntry($header, 'name'). '-' .
-						     c::headerGetEntry($header, 'version'). '-' .
-						     c::headerGetEntry($header, 'release'));
-				 if ($toRemove{$otherPackage}) {
-				     print UPGRADE_OUTPUT "remove:$otherPackage\n";
-				     if (packageFlagBase($packages->{names}{c::headerGetEntry($header, 'name')})) {
-					 delete $toRemove{$otherPackage}; #- keep it selected, but force upgrade.
-				     } else {
-					 my @files = c::headerGetEntry($header, 'filenames');
-					 my @flags = c::headerGetEntry($header, 'fileflags');
-					 for my $i (0..$#flags) {
-					     if ($flags[$i] & c::RPMFILE_CONFIG()) {
-						 print UPGRADE_OUTPUT "keepfiles:$files[$i]\n" unless $files[$i] =~ /kdelnk/;
-					     }
-					 }
-				     }
-				 }
-			     });
-	}
-
-	#- close db, job finished !
-	c::rpmdbClose($db);
-	log::l("done selecting packages to upgrade");
-
-	close UPGRADE_OUTPUT;
-	c::_exit(0);
-    }
-
-    #- keep a track of packages that are been selected for being upgraded,
-    #- these packages should not be unselected (unless expertise)
-    foreach my $p (values %{$packages->{names}}) {
-	packageSetFlagUpgrade($p, 1) if packageFlagSelected($p);
-    }
-}
-
-sub allowedToUpgrade { $_[0] !~ /^(kernel|kernel22|kernel2.2|kernel-secure|kernel-smp|kernel-linus|kernel-linus2.2|hackkernel|kernel-enterprise)$/ }
-
-sub installCallback {
-#    my $msg = shift;
-#    log::l($msg .": ". join(',', @_));
-}
-
-sub install($$$;$$) {
-    my ($prefix, $isUpgrade, $toInstall, $depOrder, $media) = @_;
-    my %packages;
-
-    return if $::g_auto_install || !scalar(@$toInstall);
-
-    #- for root loopback'ed /boot
-    my $loop_boot = loopback::prepare_boot($prefix);
-
-    #- first stage to extract some important informations
-    #- about the packages selected. this is used to select
-    #- one or many transaction.
-    my ($total, $nb);
-    foreach my $pkg (@$toInstall) {
-	$packages{packageName($pkg)} = $pkg;
-	$nb++;
-	$total += packageSize($pkg);
-    }
-
-    log::l("pkgs::install $prefix");
-    log::l("pkgs::install the following: ", join(" ", keys %packages));
-    eval { fs::mount("/proc", "$prefix/proc", "proc", 0) } unless -e "$prefix/proc/cpuinfo";
-
-    init_db($prefix);
-
-    my $callbackOpen = sub {
-	my $p = $packages{$_[0]} or log::l("unable to retrieve package of $_[0]"), return -1;
-	my $f = packageFile($p);
-	print LOG "$f $media->{$p->[$MEDIUM]}{descr}\n";
-	my $fd = install_any::getFile($f, $media->{$p->[$MEDIUM]}{descr});
-	$fd ? fileno $fd : -1;
-    };
-    my $callbackClose = sub { packageSetFlagInstalled($packages{$_[0]}, 1) };
-
-    #- do not modify/translate the message used with installCallback since
-    #- these are keys during progressing installation, or change in other
-    #- place (install_steps_gtk.pm,...).
-    installCallback("Starting installation", $nb, $total);
-
-    my ($i, $min, $medium) = (0, 0, 1);
-    do {
-	my @transToInstall;
-
-	if (!$depOrder || !$media) {
-	    @transToInstall = values %packages;
-	    $nb = 0;
-	} else {
-	    do {
-		#- change current media if needed.
-		if ($i > $media->{$medium}{max}) {
-		    #- search for media that contains the desired package to install.
-		    foreach (keys %$media) {
-			$i >= $media->{$_}{min} && $i <= $media->{$_}{max} and $medium = $_, last;
-		    }
-		}
-		$i >= $media->{$medium}{min} && $i <= $media->{$medium}{max} or die "unable to find right medium";
-		install_any::useMedium($medium);
-
-		while ($i <= $media->{$medium}{max} && ($i < $min || scalar @transToInstall < $limitMinTrans)) {
-		    my $pkg = $depOrder->[$i++] or next;
-		    my $dep = $packages{packageName($pkg)} or next;
-		    if ($media->{$dep->[$MEDIUM]}{selected}) {
-			push @transToInstall, $dep;
-			foreach (map { split '\|' } packageDepsId($dep)) {
-			    $min < $_ and $min = $_;
-			}
-		    } else {
-			log::l("ignoring package $dep->[$FILE] as its medium is not selected");
-		    }
-		    --$nb; #- make sure the package is not taken into account as its medium is not selected.
-		}
-	    } while ($nb > 0 && scalar(@transToInstall) == 0); #- avoid null transaction, it a nop that cost a bit.
-	}
-
-	#- added to exit typically after last media unselected.
-	if ($nb == 0 && scalar(@transToInstall) == 0) {
-	    cleanHeaders($prefix);
-
-	    loopback::save_boot($loop_boot);
-	    return;
-	}
-
-	#- extract headers for parent as they are used by callback.
-	extractHeaders($prefix, \@transToInstall, $media->{$medium});
-
-	if ($media->{$medium}{method} eq 'cdrom') {
-	    #- reset file descriptor open for main process but
-	    #- make sure error trying to change from hdlist are
-	    #- trown from main process too.
-	    install_any::getFile(packageFile($transToInstall[0]), $media->{$transToInstall[0][$MEDIUM]}{descr});
-	}
-	#- and make sure there are no staling open file descriptor too (before forking)!
-	install_any::getFile('XXX');
-
-	my ($retry_package, $retry_count);
-	while ($retry_package || @transToInstall) {
-	    local (*INPUT, *OUTPUT); pipe INPUT, OUTPUT;
-	    if (my $pid = fork()) {
-		close OUTPUT;
-		my $error_msg = '';
-		local $_;
-		while (<INPUT>) {
-		    if (/^die:(.*)/) {
-			$error_msg = $1;
-			last;
-		    } else {
-			chomp;
-			my @params = split ":";
-			if ($params[0] eq 'close') {
-			    &$callbackClose($params[1]);
-			} else {
-			    installCallback(@params);
-			}
-		    }
-		}
-		$error_msg and $error_msg .= join('', <INPUT>);
-		waitpid $pid, 0;
-		close INPUT;
-		$error_msg and die $error_msg;
-	    } else {
-		#- child process will run each transaction.
-		$SIG{SEGV} = sub { log::l("segmentation fault on transactions"); c::_exit(0) };
-		my $db;
-		eval {
-		    close INPUT;
-		    select((select(OUTPUT),  $| = 1)[0]);
-		    $db = c::rpmdbOpen($prefix) or die "error opening RPM database: ", c::rpmErrorString();
-		    my $trans = c::rpmtransCreateSet($db, $prefix);
-		    if ($retry_package) {
-			log::l("opened rpm database for retry transaction of 1 package only");
-			c::rpmtransAddPackage($trans, $retry_package->[$HEADER], packageName($retry_package),
-					      $isUpgrade && allowedToUpgrade(packageName($retry_package)));
-		    } else {
-			log::l("opened rpm database for transaction of ". scalar @transToInstall ." new packages, still $nb after that to do");
-			c::rpmtransAddPackage($trans, $_->[$HEADER], packageName($_),
-					      $isUpgrade && allowedToUpgrade(packageName($_)))
-			    foreach @transToInstall;
-		    }
-
-		    c::rpmdepOrder($trans) or die "error ordering package list: " . c::rpmErrorString();
-		    c::rpmtransSetScriptFd($trans, fileno LOG);
-
-		    log::l("rpmRunTransactions start");
-		    my @probs = c::rpmRunTransactions($trans, $callbackOpen,
-						      sub { #- callbackClose
-							  my $p = $packages{$_[0]} or return;
-							  my $check_installed;
-							  c::rpmdbNameTraverse($db, packageName($p), sub {
-										   my ($header) = @_;
-										   $check_installed ||= c::headerGetEntry($header, 'version') eq packageVersion($p) && c::headerGetEntry($header, 'release') eq packageRelease($p);
-									       });
-							  $check_installed and print OUTPUT "close:$_[0]\n"; },
-						      sub { #- installCallback
-							  print OUTPUT join(":", @_), "\n"; },
-						      1);
-		    log::l("rpmRunTransactions done, now trying to close still opened fd");
-		    install_any::getFile('XXX'); #- close still opened fd.
-
-		    if (@probs) {
-			my %parts;
-			@probs = reverse grep {
-			    if (s/(installing package) .* (needs (?:.*) on the (.*) filesystem)/$1 $2/) {
-				$parts{$3} ? 0 : ($parts{$3} = 1);
-			    } else {
-				1;
-			    }
-			} reverse map { s|/mnt||; $_ } @probs;
-
-			c::rpmdbClose($db);
-			die "installation of rpms failed:\n  ", join("\n  ", @probs);
-		    }
-		}; $@ and print OUTPUT "die:$@\n";
-
-		c::rpmdbClose($db);
-		log::l("rpm database closed");
-
-		close OUTPUT;
-
-		#- now search for child process which may be locking the cdrom, making it unable to be ejected.
-		my (@killpid, %tree, $pid);
-		local (*DIR, *F, $_);
-		opendir DIR, "/proc";
-		while ($pid = readdir DIR) {
-		    $pid =~ /^\d+$/ or next;
-		    open F, "/proc/$pid/status";
-		    while (<F>) {
-			/^Pid:\s+(\d+)/ and $pid == $1 || die "incorrect pid reported for $pid (found $1)";
-			if (/^PPid:\s+(\d+)/) {
-			    $tree{$pid} and die "PPID already found for $pid, previously $tree{$pid}, now $1";
-			    $tree{$pid} = $1;
-			}
-		    }
-		    close F;
-		}
-		closedir DIR;
-		foreach (keys %tree) {
-		    #- remove child of this process (which will terminate).
-		    $pid = $_; while ($pid = $tree{$pid}) { $pid == $$ and push @killpid, $_ }
-		    #- remove child of 1 direct that have a pid greater than current one.
-		    $_ > $$ && $tree{$_} == 1 and push @killpid, $_;
-		}
-		if (@killpid) {
-		    log::l("killing process ". join(", ", @killpid));
-		    kill 15, @killpid;
-		    sleep 2;
-		    kill 9, @killpid;
-		}
-
-		c::_exit(0);
-	    }
-
-	    #- if we are using a retry mode, this means we have to split the transaction with only
-	    #- one package for each real transaction.
-	    unless ($retry_package) {
-		my @badPackages;
-		foreach (@transToInstall) {
-		    if (!packageFlagInstalled($_) && $media->{$_->[$MEDIUM]}{selected} && !exists($ignoreBadPkg{packageName($_)})) {
-			push @badPackages, $_;
-			log::l("bad package $_->[$FILE]");
-		    } else {
-			packageFreeHeader($_);
-		    }
-		}
-		@transToInstall = @badPackages;
-		#- if we are in retry mode, we have to fetch only one package at a time.
-		$retry_package = shift @transToInstall;
-		$retry_count = 3;
-	    } else {
-		if (!packageFlagInstalled($retry_package) && $media->{$retry_package->[$MEDIUM]}{selected} && !exists($ignoreBadPkg{packageName($retry_package)})) {
-		    if ($retry_count) {
-			log::l("retrying installing package $retry_package->[$FILE] alone in a transaction");
-			--$retry_count;
-		    } else {
-			log::l("bad package $retry_package->[$FILE] unable to be installed");
-			packageSetFlagSelected($retry_package, 0);
-			cdie ("error installing package list: $retry_package->[$FILE]");
-		    }
-		}
-		if (packageFlagInstalled($retry_package) || ! packageFlagSelected($retry_package)) {
-		    packageFreeHeader($retry_package);
-		    $retry_package = shift @transToInstall;
-		    $retry_count = 3;
-		}
-	    }
-	}
-	cleanHeaders($prefix);
-    } while ($nb > 0 && !$pkgs::cancel_install);
-
-    done_db();
-
-    cleanHeaders($prefix);
-
-    loopback::save_boot($loop_boot);
-}
-
-sub remove($$) {
-    my ($prefix, $toRemove) = @_;
-
-    return if $::g_auto_install || !@{$toRemove || []};
-
-    log::l("reading /usr/lib/rpm/rpmrc");
-    c::rpmReadConfigFiles() or die "can't read rpm config files";
-    log::l("\tdone");
-
-    my $db = c::rpmdbOpen($prefix) or die "error opening RPM database: ", c::rpmErrorString();
-    log::l("opened rpm database for removing old packages");
-
-    my $trans = c::rpmtransCreateSet($db, $prefix);
-
-    foreach my $p (@$toRemove) {
-	#- stuff remove all packages that matches $p, not a problem since $p has name-version-release format.
-	c::rpmtransRemovePackages($db, $trans, $p) if allowedToUpgrade($p);
-    }
-
-    eval { fs::mount("/proc", "$prefix/proc", "proc", 0) } unless -e "$prefix/proc/cpuinfo";
-
-    my $callbackOpen = sub { log::l("trying to open file from $_[0] which should not happen"); };
-    my $callbackClose = sub { log::l("trying to close file from $_[0] which should not happen"); };
-
-    #- we are not checking depends since it should come when
-    #- upgrading a system. although we may remove some functionalities ?
-
-    #- do not modify/translate the message used with installCallback since
-    #- these are keys during progressing installation, or change in other
-    #- place (install_steps_gtk.pm,...).
-    installCallback("Starting removing other packages", scalar @$toRemove);
-
-    if (my @probs = c::rpmRunTransactions($trans, $callbackOpen, $callbackClose, \&installCallback, 1)) {
-	die "removing of old rpms failed:\n  ", join("\n  ", @probs);
-    }
-    c::rpmtransFree($trans);
-    c::rpmdbClose($db);
-    log::l("rpm database closed");
-
-    #- keep in mind removing of these packages by cleaning $toRemove.
-    @{$toRemove || []} = ();
-}
-
-sub selected_leaves {
-    my ($packages) = @_;
-    my %l;
-
-    #- initialize l with all id, not couting base package.
-    foreach my $id (0 .. $#{$packages->{depslist}}) {
-	my $pkg = packageById($packages, $id) or next;
-	packageSelectedOrInstalled($pkg) && !packageFlagBase($pkg) or next;
-	$l{$id} = 1;
-    }
-
-    foreach my $id (keys %l) {
-	#- when a package is in a choice, increase its value in hash l, because
-	#- it has to be examined before when we will select them later.
-	#- NB: this number may be computed before to save time.
-	my $p = $packages->{depslist}[$id] or next;
-	foreach (packageDepsId($p)) {
-	    if (/\|/) {
-		foreach (split '\|') {
-		    exists $l{$_} or next;
-		    $l{$_} > 1 + $l{$id} or $l{$_} = 1 + $l{$id};
-		}
-	    }
-	}
-    }
-
-    #- at this level, we can remove selected packages that are already
-    #- required by other, but we have to sort according to choice usage.
-    foreach my $id (sort { $l{$b} <=> $l{$a} || $b <=> $a } keys %l) {
-	#- do not count already deleted id, else cycles will be removed.
-	$l{$id} or next;
-
-	my $p = $packages->{depslist}[$id] or next;
-	foreach (packageDepsId($p)) {
-	    #- choices need no more to be examined, this has been done above.
-	    /\|/ and next;
-	    #- improve value of this one, so it will be selected before.
-	    $l{$id} < $l{$_} and $l{$id} = $l{$_};
-	    $l{$_} = 0;
-	}
-    }
-
-    #- now sort again according to decrementing value, and gives packages name.
-    [ map { packageName($packages->{depslist}[$_]) } sort { $l{$b} <=> $l{$a} } grep { $l{$_} > 0 } keys %l ];
-}
-
-
-sub naughtyServers {
-    my ($packages) = @_;
-
-    my @old = qw(
-freeswan
-jabber
-);
-    # boa ??
-    my @sure = qw(
-FreeWnn
-MySQL
-am-utils
-apache
-boa
-cfengine
-cups
-drakxtools-http
-finger-server
-imap
-leafnode
-lpr
-mon
-ntp
-openssh-server
-pidentd
-postfix
-postgresql-server
-proftpd
-rwall
-rwho
-squid
-webmin
-wu-ftpd
-ypbind
-); # nfs-utils-clients portmap
-   # X server
-
-  my @new = qw(
-apache-mod_perl
-ftp-server-krb5
-mcserv
-mysql
-samba
-telnet-server-krb5
-vnc-server
-ypserv
-);
-
-    my @naughtyServers = (@new, @sure);
-
-    grep {
-	my $p = packageByName($packages, $_);
-	$p && packageFlagSelected($p);
-    } @naughtyServers;
-}
-
-1;
diff --git a/perl-install/printer.pm b/perl-install/printer.pm
deleted file mode 100644
index 3274627be..000000000
--- a/perl-install/printer.pm
+++ /dev/null
@@ -1,1269 +0,0 @@
-package printer;
-
-# $Id$
-
-#use diagnostics;
-#use strict;
-
-
-use common;
-use run_program;
-
-#-if we are in an DrakX config
-my $prefix = "";
-
-#-location of the printer database in an installed system
-my $PRINTER_DB_FILE = "/usr/share/foomatic/db/compiled/overview.xml";
-#-configuration directory of Foomatic
-my $FOOMATICCONFDIR = "/etc/foomatic"; 
-#-location of the file containing the default spooler's name
-my $FOOMATIC_DEFAULT_SPOOLER = "$FOOMATICCONFDIR/defaultspooler";
-
-%spooler = (
-    _("CUPS - Common Unix Printing System") => "cups",
-    _("LPRng - LPR New Generation")         => "lprng",
-    _("LPD - Line Printer Daemon")          => "lpd",
-    _("PDQ - Print, Don't Queue")           => "pdq"
-#    _("PDQ - Marcia, click here!")           => "pdq"
-);
-%spooler_inv = reverse %spooler;
-
-%shortspooler = (
-    _("CUPS")   => "cups",
-    _("LPRng")  => "lprng",
-    _("LPD")    => "lpd",
-    _("PDQ")    => "pdq"
-);
-%shortspooler_inv = reverse %shortspooler;
-
-%printer_type = (
-    _("Local printer")                              => "LOCAL",
-    _("Remote printer")                             => "REMOTE",
-    _("Printer on remote CUPS server")              => "CUPS",
-    _("Printer on remote lpd server")               => "LPD",
-    _("Network printer (socket)")                   => "SOCKET",
-    _("Printer on SMB/Windows 95/98/NT server")     => "SMB",
-    _("Printer on NetWare server")                  => "NCP",
-    _("Enter a printer device URI")                 => "URI",
-    _("Pipe job into a command")                    => "POSTPIPE"
-);
-%printer_type_inv = reverse %printer_type;
-
-#------------------------------------------------------------------------------
-
-sub set_prefix($) { $prefix = $_[0]; }
-
-sub default_printer_type($) { "LOCAL" }
-
-sub spooler {
-    # LPD is taken from the menu for the moment because the classic LPD is
-    # highly unsecure. Depending on how the GNU lpr development is going on
-    # LPD support can be reactivated by uncommenting the line which is
-    # commented out now.
-
-    #return @spooler_inv{qw(cups lpd lprng pdq)};
-    return @spooler_inv{qw(cups lprng pdq)};
-}
-
-sub printer_type($) {
-    my ($printer) = @_;
-    for ($printer->{SPOOLER}) {
-	# In the case of CUPS as spooler only present the "Remote CUPS
-	# server" option when one adds a new printer, not when one modifies
-	# an already configured one.
-	/cups/ && return @printer_type_inv{qw(LOCAL), 
-			 $printer->{configured}{$printer->{OLD_QUEUE}} ?
-			     () : qw(CUPS), qw(LPD SOCKET SMB), 
-			     $::expert ? qw(URI) : ()};
-	/lpd/  && return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP),
-					   $::expert ? qw(POSTPIPE URI) : ()};
-	/lprng/  && return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP),
-					   $::expert ? qw(POSTPIPE URI) : ()};
-	/pdq/  && return @printer_type_inv{qw(LOCAL LPD SOCKET),
-					   $::expert ? qw(URI) : ()};
-    }
-}
-
-sub get_default_spooler () {
-    if (-f "$prefix$FOOMATIC_DEFAULT_SPOOLER") {
-	open DEFSPOOL, "< $prefix$FOOMATIC_DEFAULT_SPOOLER";
-	my $spool = <DEFSPOOL>;
-	chomp $spool;
-	close DEFSPOOL;
-	if ($spool =~ /cups|lpd|lprng|pdq/) {
-	    return $spool;
-	}
-    }
-}
-
-sub set_default_spooler ($) {
-    my ($printer) = @_;
-    # Make Foomatic config directory if it does not exist yet
-    if (!(-d "$prefix$FOOMATICCONFDIR")) {mkdir "$prefix$FOOMATICCONFDIR";}
-    # Mark the default driver in a file
-    open DEFSPOOL, "> $prefix$FOOMATIC_DEFAULT_SPOOLER" || 
-	die "Cannot create $prefix$FOOMATIC_DEFAULT_SPOOLER!";
-    print DEFSPOOL $printer->{SPOOLER};
-    close DEFSPOOL;
-}
-
-sub set_permissions {
-    my ($file, $perms, $owner, $group) = @_;
-    # We only need to set the permissions during installation to be able to
-    # print test pages. After installation the devfsd daemon does the business
-    # automatically.
-    if (!$::isInstall) {return 1;}
-    if ($owner && $group) {
-        run_program::rooted($prefix, "/bin/chown", "$owner.$group", $file)
-	    || die "Could not start chown!";
-    } elsif ($owner) {
-        run_program::rooted($prefix, "/bin/chown", $owner, $file)
-	    || die "Could not start chown!";
-    } elsif ($group) {
-        run_program::rooted($prefix, "/bin/chgrp", $group, $file)
-	    || die "Could not start chgrp!";
-    }
-    run_program::rooted($prefix, "/bin/chmod", $perms, $file)
-	|| die "Could not start chmod!";
-}
-
-sub restart_service ($) {
-    my ($service) = @_;
-    run_program::rooted($prefix, "/etc/rc.d/init.d/$service", "restart");
-    if (($? >> 8) != 0) {return 0;} else {return 1;}
-}
-
-sub start_service ($) {
-    my ($service) = @_;
-    run_program::rooted($prefix, "/etc/rc.d/init.d/$service", "start");
-    if (($? >> 8) != 0) {return 0;} else {return 1;}
-}
-
-sub stop_service ($) {
-    my ($service) = @_;
-    run_program::rooted($prefix, "/etc/rc.d/init.d/$service", "stop");
-    if (($? >> 8) != 0) {return 0;} else {return 1;}
-}
-
-sub service_starts_on_boot ($) {
-    my ($service) = @_;
-    local *F; 
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"/bin/sh -c \"export LC_ALL=C; /sbin/chkconfig --list $service 2>&1\" |" ||
-	    return 0;
-    while (<F>) {
-	chomp;
-	if ($_ =~ /:on/) {
-	    close F;
-	    return 1;
-	}
-    }
-    close F;
-    return 0;
-}
-
-sub start_service_on_boot ($) {
-    my ($service) = @_;
-    run_program::rooted($prefix, "/sbin/chkconfig", "--add", $service)
-	|| return 0;
-    return 1;
-}
-
-sub SIGHUP_daemon {
-    my ($service) = @_;
-    # PDQ has no daemon, exit.
-    if ($service eq "pdq") {return 1};
-    # CUPS needs auto-configuration
-    if ($service eq "cups") {
-        run_program::rooted($prefix, "/usr/sbin/setcupsconfig");
-    }
-    # Name of the daemon
-    my $daemon;
-    if (($service eq "lpr") || ($service eq "lpd") || ($service eq "lprng")) {
-	$daemon = "lpd";
-    } elsif ($service eq "cups") {
-	$daemon = "cupsd";
-    } elsif ($service eq "devfs") {
-	$daemon = "devfsd";
-    } else {
-	return 1;
-    }
-    # Send the SIGHUP
-    run_program::rooted($prefix, "/usr/bin/killall", "-HUP", $daemon);
-    # CUPS needs some time to come up.
-    if ($service eq "cups") {
-	sleep 5;
-    }
-    return 1;
-}
-
-sub network_running {
-    # If the network is not running return 0, otherwise 1.
-    local *F; 
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"/bin/sh -c \"export LC_ALL=C; /sbin/ifconfig\" |" ||
-	    die "Could not run \"ifconfig\"!";
-    while (<F>) {
-	if (($_ !~ /^lo\s+/) && # The loopback device can have been started by
-	                        # the spooler's startup script
-	    ($_ =~ /^(\S+)\s+/)) { # In this line starts an entry for a
-	                           # running network
-	    close F;
-	    return 1;
-	}
-    }
-    close F;
-    return 0;
-}
-
-sub get_security_level {
-    # Get security level by reading /etc/profile (only after install).
-    # This is a preliminary solution until msec puts the security level
-    # definition into the correct file.
-    $file = "/etc/profile";
-    if (-f $file) {
-	local *F; 
-	open F, "< $file" || return 0;
-	while (<F>) {
-	    if ($_ =~ /^\s*SECURE_LEVEL=([0-5])\s*$/) {
-		close F;
-		return $1;
-	    }
-	}
-	close F;
-    }
-    return 0;
-}
-    
-
-sub spooler_in_security_level {
-    # Was the current spooler already added to the current security level?
-    my ($spooler, $level) = @_;
-    my $sp;
-    if (($spooler eq "lpr") || ($spooler eq "lprng")) {
-	$sp = "lpd";
-    } else {
-	$sp = $spooler;
-    }
-    $file = "$prefix/etc/security/msec/server.$level";
-    if (-f $file) {
-	local *F; 
-	open F, "< $file" || return 0;
-	while (<F>) {
-	    if ($_ =~ /^\s*$sp\s*$/) {
-		close F;
-		return 1;
-	    }
-	}
-	close F;
-    }
-    return 0;
-}
-
-sub add_spooler_to_security_level {
-    my ($spooler, $level) = @_;
-    my $sp;
-    if (($spooler eq "lpr") || ($spooler eq "lprng")) {
-	$sp = "lpd";
-    } else {
-	$sp = $spooler;
-    }
-    $file = "$prefix/etc/security/msec/server.$level";
-    if (-f $file) {
-	local *F; 
-	open F, ">> $file" || return 0;
-	print F "$sp\n";
-	close F;
-    }
-    return 1;
-}
-
-sub files_exist {
-    my @files = @_;
-    for (@files) {
-	if (! -f "$prefix$_") {return 0;}
-    }
-    return 1;
-}
-
-sub set_alternative {
-    my ($command, $executable) = @_;
-    local *F;
-    # Read the list of executables for the given command to find the number
-    # of the desired executable
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"/bin/sh -c \"export LC_ALL=C; /bin/echo | update-alternatives --config $command \" |" ||
-	    die "Could not run \"update-alternatives\"!";
-    my $choice = 0;
-    while (<F>) {
-	chomp;
-	if ($_ =~ m/^[\* ][\+ ]\s*([0-9]+)\s+(\S+)\s*$/) { # list entry?
-	    if ($2 eq $executable) {
-		$choice = $1;
-		last;
-	    }
-	}
-    }
-    close F;
-    # If the executable was found, assign the command to it
-    if ($choice > 0) {
-	system(($::testing ? "$prefix" : "chroot $prefix/ ") .
-	       "/bin/sh -c \"/bin/echo $choice | update-alternatives --config $command > /dev/null 2>&1\"");
-    }
-    return 1;
-}    
-
-sub pdq_panic_button {
-    my $setting = $_[0];
-    if (-f "/usr/sbin/pdqpanicbutton") {
-        run_program::rooted($prefix, "/usr/sbin/pdqpanicbutton", "--$setting")
-	    || die "Could not $setting PDQ panic buttons!";
-    }
-}
-
-sub copy_printer_params($$) {
-    my ($from, $to) = @_;
-    map { $to->{$_} = $from->{$_} } grep { $_ ne 'configured' } keys %$from; 
-    #- avoid cycles-----------------^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-}
-
-sub getinfo($) {
-    my ($prefix) = @_;
-    my $printer = {};
-    my @QUEUES;
-
-    set_prefix($prefix);
-
-    # Initialize $printer data structure
-    resetinfo($printer);
-
-    return $printer;
-}
-
-#------------------------------------------------------------------------------
-sub resetinfo($) {
-    my ($printer) = @_;
-    $printer->{QUEUE} = "";
-    $printer->{OLD_QUEUE} = "";
-    $printer->{OLD_CHOICE} = "";
-    $printer->{ARGS} = "";
-    $printer->{DBENTRY} = "";
-    $printer->{DEFAULT} = "";
-    $printer->{currentqueue} = {};
-    # -check which printing system was used previously and load the information
-    # -about its queues
-    read_configured_queues($printer);
-}
-
-sub read_configured_queues($) {
-    my ($printer) = @_;
-    my @QUEUES;
-    # Get the default spooler choice from the config file
-    $printer->{SPOOLER} ||= get_default_spooler();
-    if (!$printer->{SPOOLER}) {
-	#- Find the first spooler where there are queues
-	my $spooler;
-	for $spooler (qw(cups pdq lprng lpd)) {
-	    #- poll queue info 
-	    local *F; 
-	    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-		"foomatic-configure -P -q -s $spooler |" ||
-		    die "Could not run foomatic-configure";
-	    eval (join('',(<F>))); 
-	    close F;
-	    #- Have we found queues?
-	    if ($#QUEUES != -1) {
-		$printer->{SPOOLER} = $spooler;
-		last;
-	    }
-	}
-    } else {
-	#- Poll the queues of the current default spooler
-	local *F; 
-	open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	    "foomatic-configure -P -q -s $printer->{SPOOLER} |" ||
-		die "Could not run foomatic-configure";
-	eval (join('',(<F>))); 
-	close F;
-    }
-    $printer->{configured} = {};
-    my $i;
-    my $N = $#QUEUES + 1;
-    for ($i = 0;  $i < $N; $i++) {
-	$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}} = 
-	    $QUEUES[$i];
-	if ((!$QUEUES[$i]->{'make'}) || (!$QUEUES[$i]->{'model'})) {
-	    if ($printer->{SPOOLER} eq "cups") {
-		$printer->{OLD_QUEUE} = $QUEUES[$i]->{'queuedata'}{'queue'};
-		my $descr = get_descr_from_ppd($printer);
-		$descr =~ m/^([^\|]*)\|([^\|]*)\|.*$/;
-		$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'make'} ||= $1;
-		$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'model'} ||= $2;
-		# Read out which PPD file was originally used to set up this
-		# queue
-		local *F;
-		if (open F, "< $prefix/etc/cups/ppd/$QUEUES[$i]->{'queuedata'}{'queue'}.ppd") {
-		    while (<F>) {
-			if ($_ =~ /^\*%MDKMODELCHOICE:(.+)$/) {
-			    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'ppd'} = $1;
-			}
-		    }
-		    close F;
-		}
-		# Mark that we have a CUPS queue but do not know the name
-		# the PPD file in /usr/share/cups/model
-		if (!$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'ppd'}) {
-		    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'ppd'} = '1';
-		}
-		$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'driver'} = 'CUPS/PPD';
-		$printer->{OLD_QUEUE} = "";
-		# Read out the printer's options
-		$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'args'} = read_cups_options($QUEUES[$i]->{'queuedata'}{'queue'});
-	    }
-	    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'make'} ||= "";
-	    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'model'} ||= _("Unknown model");
-	} else {
-	    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'make'} = $QUEUES[$i]->{'make'};
-	    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'model'} = $QUEUES[$i]->{'model'};
-	}
-	# Fill in "options" field
-	if (my $args = $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'args'}) {
-	    my $arg;
-	    my @options;
-	    for $arg (@{$args}) {
-		push(@options, "-o");
-		my $optstr = $arg->{'name'} . "=" . $arg->{'default'};
-		push(@options, $optstr);
-	    }
-	    @{$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{options}} = @options;
-	}
-    }
-}
-
-sub read_printer_db(;$) {
-
-    my $spooler = $_[0];
-
-    my $dbpath = $prefix . $PRINTER_DB_FILE;
-
-    local $_; #- use of while (<...
-
-    local *DBPATH; #- don't have to do close ... and don't modify globals at least
-    # Generate the Foomatic printer/driver overview, read it from the
-    # appropriate file when it is already generated
-    if (!(-f $dbpath)) {
-	open DBPATH, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	    "foomatic-configure -O -q |" ||
-		die "Could not run foomatic-configure";
-    } else {
-	open DBPATH, $dbpath or die "An error has occurred on $dbpath : $!";
-    }
-
-    my $entry = {};
-    my $inentry = 0;
-    my $indrivers = 0;
-    my $inautodetect = 0;
-    while (<DBPATH>) {
-	chomp;
-	if ($inentry) {
-	    # We are inside a printer entry
-	    if ($indrivers) {
-		# We are inside the drivers block of a printers entry
-		if (m!^\s*</drivers>\s*$!) {
-		    # End of drivers block
-		    $indrivers = 0;
-		} elsif (m!^\s*<driver>(.+)</driver>\s*$!) {
-		    push (@{$entry->{drivers}}, $1);
-		}
-	    } elsif ($inautodetect) {
-		# We are inside the autodetect block of a printers entry
-		# All entries inside this block will be ignored
-		if (m!^.*</autodetect>\s*$!) {
-		    # End of autodetect block
-		    $inautodetect = 0;
-		}
-	    } else {
-		if (m!^\s*</printer>\s*$!) {
-		    # entry completed
-		    $inentry = 0;
-		    # Expert mode:
-		    # Make one database entry per driver with the entry name
-		    # manufacturer|model|driver
-		    if ($::expert) {
-			my $driver;
-			for $driver (@{$entry->{drivers}}) {
-			    my $driverstr;
-			    if ($driver eq "Postscript") {
-				$driverstr = "PostScript";
-			    } else {
-				$driverstr = "GhostScript + $driver";
-			    }
-			    if ($driver eq $entry->{defaultdriver}) {
-				$driverstr .= " (recommended)";
-			    }
-			    $entry->{ENTRY} = "$entry->{make}|$entry->{model}|$driverstr";
-			    $entry->{driver} = $driver;
-			    # Duplicate contents of $entry because it is multiply entered to the database
-			    map { $thedb{$entry->{ENTRY}}->{$_} = $entry->{$_} } keys %$entry;
-			}
-		    } else {
-			# Recommended mode
-			# Make one entry per printer, with the recommended
-			# driver (manufacturerer|model)
-			$entry->{ENTRY} = "$entry->{make}|$entry->{model}";
-			if ($entry->{defaultdriver}) {
-			    $entry->{driver} = $entry->{defaultdriver};
-			    map { $thedb{$entry->{ENTRY}}->{$_} = $entry->{$_} } keys %$entry;
-			}
-		    }
-		    $entry = {};
-		} elsif (m!^\s*<id>\s*([^\s<>]+)\s*</id>\s*$!) {
-		    # Foomatic printer ID
-		    $entry->{printer} = $1;
-		} elsif (m!^\s*<make>(.+)</make>\s*$!) {
-		    # Printer manufacturer
-		    $entry->{make} = uc($1);
-		} elsif (m!^\s*<model>(.+)</model>\s*$!) {
-		    # Printer model
-		    $entry->{model} = $1;
-		} elsif (m!<driver>(.+)</driver>!) {
-		    # Printer default driver
-		    $entry->{defaultdriver} = $1;
-		} elsif (m!^\s*<drivers>\s*$!) {
-		    # Drivers block
-		    $indrivers = 1;
-		    @{$entry->{drivers}} = (); 
-		} elsif (m!^\s*<autodetect>\s*$!) {
-		    # Autodetect block
-		    $inautodetect = 1;
-		}
-	    }
-	} else {
-	    if (m!^\s*<printer>\s*$!) {
-		# new entry
-		$inentry = 1;
-	    }
-	}
-    }
-    close DBPATH;
-
-    # Add raw queue
-    if ($spooler ne "pdq") {
-	$entry->{ENTRY} = _("Raw printer (No driver)");
-	$entry->{driver} = "raw";
-	$entry->{make} = "";
-	$entry->{model} = _("Unknown model");
-	map { $thedb{$entry->{ENTRY}}->{$_} = $entry->{$_} } keys %$entry;
-    }
-
-    #- Load CUPS driver database if CUPS is used as spooler
-    if (($spooler) && ($spooler eq "cups") && ($::expert)) {
-
-	#&$install('cups-drivers') unless $::testing;
-	#my $w;
-	#if ($in) {
-	#    $w = $in->wait_message(_("CUPS starting"),
-	#			   _("Reading CUPS drivers database..."));
-	#}
-        poll_ppd_base();
-    }
-
-    @entries_db_short     = sort keys %printer::thedb;
-    #%descr_to_db          = map { $printer::thedb{$_}{DESCR}, $_ } @entries_db_short;
-    #%descr_to_help        = map { $printer::thedb{$_}{DESCR}, $printer::thedb{$_}{ABOUT} } @entries_db_short;
-    #@entry_db_description = keys %descr_to_db;
-    #db_to_descr          = reverse %descr_to_db;
-
-}
-
-sub read_foomatic_options ($) {
-    my ($printer) = @_;
-    # Generate the option data for the chosen printer/driver combo
-    my $COMBODATA;
-    local *F;
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"foomatic-configure -P -q -p $printer->{currentqueue}{'printer'}" .
-	    " -d $printer->{currentqueue}{'driver'}" . 
-		($printer->{OLD_QUEUE} ?
-		  " -s $printer->{SPOOLER} -n $printer->{OLD_QUEUE}" : "") .
-		($printer->{SPECIAL_OPTIONS} ?
-		  " $printer->{SPECIAL_OPTIONS}" : "") 
-		    . " |" ||
-	    die "Could not run foomatic-configure";
-    eval (join('',(<F>))); 
-    close F;
-    # Return the arguments field
-    return $COMBODATA->{'args'};
-}
-
-sub read_cups_options ($) {
-    my ($queue_or_file) = @_;
-    # Generate the option data from a CUPS PPD file/a CUPS queue
-    # Use the same Perl data structure as Foomatic uses to be able to
-    # reuse the dialog
-    local *F;
-    if ($queue_or_file =~ /.ppd.gz$/) { # compressed PPD file
-	open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	    "gunzip -cd $queue_or_file | lphelp - |" || return 0;
-    } else { # PPD file not compressed or queue
-	open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	    "lphelp $queue_or_file |" || return 0;
-    }
-    my $i;
-    my $j;
-    my @args = ();
-    my $line;
-    my $inoption = 0;
-    my $inchoices = 0;
-#    my $innumerical = 0;
-    while ($line = <F>) {
-	chomp $line;
-	if ($inoption) {
-	    if ($inchoices) {
-		if ($line =~ /^\s*(\S+)\s+(\S.*)$/) {
-		    push(@{$args[$i]{vals}}, {});
-		    $j = $#{$args[$i]{vals}};
-		    $args[$i]{vals}[$j]{value} = $1;
-		    my $comment = $2;
-		    # Did we find the default setting?
-		    if ($comment =~ /default\)\s*$/) {
-			$args[$i]{default} = $args[$i]{vals}[$j]{value};
-			$comment =~ s/,\s*default\)\s*$//;
-		    } else {
-			$comment =~ s/\)\s*$//;
-		    }
-		    # Remove opening paranthese
-		    $comment =~ s/^\(//;
-		    # Remove page size info
-		    $comment =~ s/,\s*size:\s*[0-9\.]+x[0-9\.]+in$//;
-		    $args[$i]{vals}[$j]{comment} = $comment;
-		} elsif (($line =~ /^\s*$/) && ($#{$args[$i]{vals}} > -1)) {
-		    $inchoices = 0;
-		    $inoption = 0;
-		}
-#	    } elsif ($innumerical == 1) {
-#		if ($line =~ /^\s*The default value is ([0-9\.]+)\s*$/) {
-#		    $args[$i]{default} = $1;
-#		    $innumerical = 0;
-#		    $inoption = 0;
-#		}
-	    } else {
-		if ($line =~ /^\s*<choice>/) {
-		    $inchoices = 1;
-#		} elsif ($line =~ /^\s*<value> must be a(.*) number in the range ([0-9\.]+)\.\.([0-9\.]+)\s*$/) {
-#		    delete($args[$i]{vals});
-#		    $args[$i]{min} = $2;
-#		    $args[$i]{max} = $3;
-#		    my $type = $1;
-#		    if ($type =~ /integer/) {
-#			$args[$i]{type} = 'int';
-#		    } else {
-#			$args[$i]{type} = 'float';
-#		    }
-#		    $innumerical = 1;
-		}
-	    }
-	} else {
-	    if ($line =~ /^\s*([^\s:][^:]*):\s+-o\s+([^\s=]+)=<choice>\s*$/) {
-#	    if ($line =~ /^\s*([^\s:][^:]*):\s+-o\s+([^\s=]+)=<.*>\s*$/) {
-		$inoption = 1;
-		push(@args, {});
-		$i = $#args;
-		$args[$i]{comment} = $1;
-		$args[$i]{name} = $2;
-		$args[$i]{type} = 'enum';
-		@{$args[$i]{vals}} = ();
-	    }
-	}
-    }
-    close F;
-    # Return the arguments field
-    return \@args;
-}
-
-#------------------------------------------------------------------------------
-
-sub read_cups_printer_list {
-    # This function reads in a list of all printers which the local CUPS
-    # daemon currently knows, including remote ones.
-    local *F;
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"lpstat -v |" || return ();
-    my @printerlist = ();
-    my $line;
-    while ($line = <F>) {
-	if ($line =~ m/^\s*device\s+for\s+([^:\s]+):\s*(\S+)\s*$/) {
-	    my $queuename = $1;
-	    my $comment = "";
-	    if ($2 =~ m!^ipp://([^/:]+)[:/]!) {
-		$comment = _("(on %s)", $1);
-	    } else {
-		$comment = _("(on this machine)");
-	    }
-	    push (@printerlist, "$queuename $comment");
-	}
-    }
-    close F;
-    return @printerlist;
-}
-
-sub set_cups_autoconf {
-    my $autoconf = $_[0];
-
-    # Read config file
-    local *F;
-    my $file = "$prefix/etc/sysconfig/printing";
-    if (!(-f $file)) {
-	@file_content = ();
-    } else {
-	open F, "< $file" or die "Cannot open $file!";
-	@file_content = <F>;
-	close F;
-    }
-
-    # Remove all valid "CUPS_CONFIG" lines
-    ($_ =~ /^\s*CUPS_CONFIG/ and $_="") foreach @file_content;
- 
-    # Insert the new "Printcap" line
-    if ($autoconf) {
-	push @file_content, "CUPS_CONFIG=automatic\n";
-    } else {
-	push @file_content, "CUPS_CONFIG=manual\n";
-    }
-
-    # Write back modified file
-    open F, "> $file" or die "Cannot open $file!";
-    print F @file_content;
-    close F;
-
-    # Restart CUPS
-    restart_service("cups");
-
-    return 1;
-}
-
-sub get_cups_autoconf {
-    local *F;
-    open F, ("< $prefix/etc/sysconfig/printing") || return 1;
-    my $line;
-    while ($line = <F>) {
-	if ($line =~ m!^[^\#]*CUPS_CONFIG=manual!) {
-	    return 0;
-	}
-    }
-    return 1;
-}
-
-sub set_default_printer {
-    my ($printer) = $_[0];
-    run_program::rooted($prefix, "foomatic-configure",
-			"-D", "-q", "-s", $printer->{SPOOLER},
-			"-n", $printer->{DEFAULT}) || return 0;
-    return 1;
-}
-
-sub get_default_printer {
-    my $printer = $_[0];
-    local *F;
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"foomatic-configure -Q -q -s $printer->{SPOOLER} |" || return undef;
-    my $line;
-    while ($line = <F>) {
-	if ($line =~ m!^\s*<defaultqueue>(.*)</defaultqueue>\s*$!) {
-	    return $1;
-	}
-    }
-    return undef;
-}
-
-sub read_cupsd_conf {
-    my @cupsd_conf;
-    local *F;
-
-    open F, "$prefix/etc/cups/cupsd.conf";
-    @cupsd_conf = <F>;
-    close F;
-
-    @cupsd_conf;
-}
-sub write_cupsd_conf {
-    my (@cupsd_conf) = @_;
-    local *F;
-
-    open F, ">$prefix/etc/cups/cupsd.conf";
-    print F @cupsd_conf;
-    close F;
-
-    #- restart cups after updating configuration.
-    restart_service("cups");
-}
-
-sub read_printers_conf {
-    my ($printer) = @_;
-    my $current = undef;
-
-    #- read /etc/cups/printers.conf file.
-    #- according to this code, we are now using the following keys for each queues.
-    #-    DeviceURI > lpd://printer6/lp
-    #-    Info      > Info Text
-    #-    Location  > Location Text
-    #-    State     > Idle|Stopped
-    #-    Accepting > Yes|No
-    local *PRINTERS; open PRINTERS, "$prefix/etc/cups/printers.conf" or return;
-    local $_;
-    while (<PRINTERS>) {
-	chomp;
-	/^\s*#/ and next;
-	if (/^\s*<(?:DefaultPrinter|Printer)\s+([^>]*)>/) { $current = { mode => 'cups', QUEUE => $1, } }
-	elsif (/\s*<\/Printer>/) { $current->{QUEUE} && $current->{DeviceURI} or next; #- minimal check of synthax.
-				   add2hash($printer->{configured}{$current->{QUEUE}} ||= {}, $current); $current = undef }
-	elsif (/\s*(\S*)\s+(.*)/) { $current->{$1} = $2 }
-    }
-    close PRINTERS;
-
-    #- assume this printing system.
-    $printer->{SPOOLER} ||= 'cups';
-}
-
-sub get_direct_uri {
-    #- get the local printer to access via a Device URI.
-    my @direct_uri;
-    local *F; open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "/usr/sbin/lpinfo -v |";
-    local $_;
-    while (<F>) {
-	/^(direct|usb|serial)\s+(\S*)/ and push @direct_uri, $2;
-    }
-    close F;
-    @direct_uri;
-}
-
-sub get_descr_from_ppd {
-    my ($printer) = @_;
-    my %ppd;
-
-    #- if there is no ppd, this means this is a raw queue.
-    local *F; open F, "$prefix/etc/cups/ppd/$printer->{OLD_QUEUE}.ppd" or return "|" . _("Unknown model");
-    # "OTHERS|Generic PostScript printer|PostScript (en)";
-    local $_;
-    while (<F>) {
-	/^\*([^\s:]*)\s*:\s*\"([^\"]*)\"/ and do { $ppd{$1} = $2; next };
-	/^\*([^\s:]*)\s*:\s*([^\s\"]*)/   and do { $ppd{$1} = $2; next };
-    }
-    close F;
-
-    my $descr = ($ppd{NickName} || $ppd{ShortNickName} || $ppd{ModelName});
-    # Apply the beautifying rules of poll_ppd_base
-    if ($descr =~ /Foomatic \+ Postscript/) {
-	$descr =~ s/Foomatic \+ Postscript/PostScript/;
-    } elsif ($descr =~ /Foomatic/) {
-	$descr =~ s/Foomatic/GhostScript/;
-    } elsif ($descr =~ /CUPS\+GIMP-print/) {
-	$descr =~ s/CUPS\+GIMP-print/CUPS \+ GIMP-Print/;
-    } elsif ($descr =~ /Series CUPS/) {
-	$descr =~ s/Series CUPS/Series, CUPS/;
-    } elsif (!(uc($descr) =~ /POSTSCRIPT/)) {
-	$descr .= ", PostScript";
-    }
-
-    # Split the $descr into model and driver
-    my $model;
-    my $driver;
-    if ($descr =~ /^([^,]+), (.*)$/) {
-	$model = $1;
-	$driver = $2;
-    } else {
-	# Some PPDs do not have the ", <driver>" part.
-	$model = $descr;
-	$driver = "PostScript";
-    }
-    my $make = $ppd{Manufacturer};
-    my $lang = $ppd{LanguageVersion};
-
-    # Remove manufacturer's name from the beginning of the model name
-    if (($make) && ($model =~ /^$make[\s\-]+([^\s\-].*)$/)) {
-	$model = $1;
-    }
-
-    # Put out the resulting description string
-    uc($make) . '|' . $model . '|' . $driver .
-      ($lang && (" (" . lc(substr($lang, 0, 2)) . ")"));
-}
-
-sub poll_ppd_base {
-    #- before trying to poll the ppd database available to cups, we have to make sure
-    #- the file /etc/cups/ppds.dat is no more modified.
-    #- if cups continue to modify it (because it reads the ppd files available), the
-    #- poll_ppd_base program simply cores :-)
-    run_program::rooted($prefix, "ifconfig lo 127.0.0.1"); #- else cups will not be happy! and ifup lo don't run ?
-    start_service("cups");
-    my $driversthere = scalar(keys %thedb);
-    foreach (1..60) {
-	local *PPDS; open PPDS, ($::testing ? "$prefix" : "chroot $prefix/ ") . "/usr/bin/poll_ppd_base -a |";
-	local $_;
-	while (<PPDS>) {
-	    chomp;
-	    my ($ppd, $mf, $descr, $lang) = split /\|/;
-	    if ($ppd eq "raw") {next;}
-	    my ($model, $driver);
-	    if ($descr) {
-		if ($descr =~ /^([^,]+), (.*)$/) {
-		    $model = $1;
-		    $driver = $2;
-		} else {
-		    # Some PPDs do not have the ", <driver>" part.
-		    $model = $descr;
-		    $driver = "PostScript";
-		}
-	    }
-	    # Rename Canon "BJC XXXX" models into "BJC-XXXX" so that the models
-	    # do not appear twice
-	    if ($mf eq "CANON") {
-		$model =~ s/BJC\s+/BJC-/;
-	    }
-	    $ppd && $mf && $descr and do {
-		my $key = "$mf|$model|$driver" . ($lang && " ($lang)");
-	        $thedb{$key}{ppd} = $ppd;
-		$thedb{$key}{driver} = $driver;
-		$thedb{$key}{make} = $mf;
-		$thedb{$key}{model} = $model;
-	    }
-	}
-	close PPDS;
-	scalar(keys %thedb) - $driversthere > 5 and last;
-	#- we have to try again running the program, wait here a little before.
-	sleep 1; 
-    }
-
-    #scalar(keys %descr_to_ppd) > 5 or die "unable to connect to cups server";
-
-}
-
-
-
-#-******************************************************************************
-#- write functions
-#-******************************************************************************
-
-sub configure_queue($) {
-    my ($printer) = @_;
-    local *F;
-
-    if ($printer->{currentqueue}{foomatic}) {
-	#- Create the queue with "foomatic-configure", in case of queue
-	#- renaming copy the old queue
-        run_program::rooted($prefix, "foomatic-configure", "-q",
-			    "-s", $printer->{currentqueue}{'spooler'},
-			    "-n", $printer->{currentqueue}{'queue'},
-			    (($printer->{currentqueue}{'queue'} ne 
-			      $printer->{OLD_QUEUE}) &&
-			     ($printer->{configured}{$printer->{OLD_QUEUE}}) ?
-			     ("-C", $printer->{OLD_QUEUE}) : ()),
-			    "-c", $printer->{currentqueue}{'connect'},
-			    "-p", $printer->{currentqueue}{'printer'},
-			    "-d", $printer->{currentqueue}{'driver'},
-			    "-N", $printer->{currentqueue}{'desc'},
-			    "-L", $printer->{currentqueue}{'loc'},
-			    @{$printer->{currentqueue}{options}}
-			    ) or die "foomatic-configure failed";
-    } elsif ($printer->{currentqueue}{ppd}) {
-	#- If the chosen driver is a PPD file from /usr/share/cups/model,
-	#- we use lpadmin to set up the queue
-        run_program::rooted($prefix, "lpadmin",
-			    "-p", $printer->{currentqueue}{'queue'},
-#			    $printer->{State} eq 'Idle' && 
-#			        $printer->{Accepting} eq 'Yes' ? ("-E") : (),
-			    "-E",
-			    "-v", $printer->{currentqueue}{'connect'},
-			    ($printer->{currentqueue}{'ppd'} ne '1') ?
-			        ("-m", $printer->{currentqueue}{'ppd'}) : (),
-			    $printer->{currentqueue}{'desc'} ?
-			        ("-D", $printer->{currentqueue}{'desc'}) : (),
-			    $printer->{currentqueue}{'loc'} ? 
-			        ("-L", $printer->{currentqueue}{'loc'}) : (),
-			    @{$printer->{currentqueue}{options}}
-			    ) or die "lpadmin failed";
-	# Add a comment line containing the path of the used PPD file to the
-	# end of the PPD file
-	if ($printer->{currentqueue}{'ppd'} ne '1') {
-	    open F, ">> $prefix/etc/cups/ppd/$printer->{currentqueue}{'queue'}.ppd";
-	    print F "*%MDKMODELCHOICE:$printer->{currentqueue}{'ppd'}\n";
-	    close F;
-	}
-	# Copy the old queue's PPD file to the new queue when it is renamed,
-	# to conserve the option settings
-	if (($printer->{currentqueue}{'queue'} ne 
-	     $printer->{OLD_QUEUE}) &&
-	    ($printer->{configured}{$printer->{OLD_QUEUE}})) {
-	    system("echo yes | cp -f " .
-		   "$prefix/etc/cups/ppd/$printer->{OLD_QUEUE}.ppd " .
-		   "$prefix/etc/cups/ppd/$printer->{currentqueue}{'queue'}.ppd");
-	}
-    } else {
-	# Raw queue
-        run_program::rooted($prefix, "foomatic-configure", "-q",
-			    "-s", $printer->{currentqueue}{'spooler'},
-			    "-n", $printer->{currentqueue}{'queue'},
-			    "-c", $printer->{currentqueue}{'connect'},
-			    "-d", $printer->{currentqueue}{'driver'},
-			    "-N", $printer->{currentqueue}{'desc'},
-			    "-L", $printer->{currentqueue}{'loc'}
-			    ) or die "foomatic-configure failed";
-    }	  
-
-    # Make sure that queue is active
-    if ($printer->{SPOOLER} ne "pdq") {
-        run_program::rooted($prefix, "foomatic-printjob",
-			    "-s", $printer->{currentqueue}{'spooler'},
-			    "-C", "up", $printer->{currentqueue}{'queue'});
-    }
-
-    # Check whether a USB printer is configured and activate USB printing if so
-    my $useUSB = 0;
-    foreach (values %{$printer->{configured}}) {
-	$useUSB ||= $_->{'queuedata'}{'connect'} =~ /usb/ || 
-	    $_->{DeviceURI} =~ /usb/;
-    }
-    $useUSB ||= ($printer->{currentqueue}{'queue'}{'queuedata'}{'connect'}
-		 =~ /usb/);
-    if ($useUSB) {
-	my $f = "$prefix/etc/sysconfig/usb";
-	my %usb = getVarsFromSh($f);
-	$usb{PRINTER} = "yes";
-	setVarsInSh($f, \%usb);
-    }
-
-    # Open permissions for device file when PDQ is chosen as spooler
-    # so normal users can print.
-    if ($printer->{SPOOLER} eq 'pdq') {
-	if ($printer->{currentqueue}{'connect'} =~ m!^\s*file:(\S*)\s*$!) {
-	    set_permissions($1,"666");
-	}
-    }
-
-    # Make a new printer entry in the $printer structure
-    $printer->{configured}{$printer->{currentqueue}{'queue'}}{'queuedata'} =
-        {};
-    copy_printer_params($printer->{currentqueue},
-      $printer->{configured}{$printer->{currentqueue}{'queue'}}{'queuedata'});
-    $printer->{configured}{$printer->{currentqueue}{'queue'}}{'args'} = {};
-    if ($printer->{currentqueue}{foomatic}) {
-	my $tmp = $printer->{OLD_QUEUE};
-	$printer->{OLD_QUEUE} = $printer->{currentqueue}{'queue'};
-	$printer->{configured}{$printer->{currentqueue}{'queue'}}{'args'} = 
-	    read_foomatic_options($printer);
-	$printer->{OLD_QUEUE} = $tmp;
-    } elsif ($printer->{currentqueue}{ppd}) {
-	$printer->{configured}{$printer->{currentqueue}{'queue'}}{'args'} =
-	    read_cups_options($printer->{currentqueue}{'queue'});
-    }
-    # Clean up
-    delete($printer->{ARGS});
-    $printer->{OLD_CHOICE} = "";
-    $printer->{ARGS} = {};
-    $printer->{DBENTRY} = "";
-    $printer->{currentqueue} = {};
-}
-
-sub remove_queue($$) {
-    my ($printer) = $_[0];
-    my ($queue) = $_[1];
-    run_program::rooted($prefix, "foomatic-configure", "-R", "-q",
-			"-s", $printer->{SPOOLER},
-			"-n", $queue);
-    # Delete old stuff from data structure
-    delete $printer->{configured}{$queue};
-    delete($printer->{currentqueue});
-    delete($printer->{ARGS});
-    $printer->{OLD_CHOICE} = "";
-    $printer->{ARGS} = {};
-    $printer->{DBENTRY} = "";
-    $printer->{currentqueue} = {};
-}
-
-sub restart_queue($) {
-    my ($printer) = @_;
-    my $queue = $printer->{QUEUE};
-
-    # Restart the daemon(s)
-    for ($printer->{SPOOLER}) {
-	/cups/ && do {
-	    #- restart cups.
-	    restart_service("cups"); sleep 1;
-	    last };
-	/lpr|lprng/ && do {
-	    #- restart lpd.
-	    foreach (("/var/spool/lpd/$queue/lock", "/var/spool/lpd/lpd.lock")) {
-		my $pidlpd = (cat_("$prefix$_"))[0];
-		kill 'TERM', $pidlpd if $pidlpd;
-		unlink "$prefix$_";
-	    }
-	    restart_service("lpd"); sleep 1;
-	    last };
-    }
-    # Kill the jobs
-    run_program::rooted($prefix, "foomatic-printjob", "-R",
-			"-s", $printer->{SPOOLER},
-			"-P", $queue, "-");
-
-}
-
-sub print_pages($@) {
-    my ($printer, @pages) = @_;
-    my $queue = $printer->{QUEUE};
-    my $lpr = "/usr/bin/foomatic-printjob";
-    my $lpq = "$lpr -Q";
-
-    # Print the pages
-    foreach (@pages) {
-	my $page = $_;
-	# Only text and PostScript can be printed directly with all spoolers,
-	# images must be treated seperately
-	if ($page =~ /\.jpg$/) {
-	    system(($::testing ? "$prefix" : "chroot $prefix/ ") .
-		   "/usr/bin/convert $page -page 427x654+100+65 PS:- | " .
-		   ($::testing ? "$prefix" : "chroot $prefix/ ") .
-		   "$lpr -s $printer->{SPOOLER} -P $queue");
-	} else {
-	    run_program::rooted($prefix, $lpr, "-s", $printer->{SPOOLER},
-				"-P", $queue, $page);
-	}
-    }
-    sleep 5; #- allow lpr to send pages.
-    # Check whether the job is queued
-    local *F; 
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "$lpq -s $printer->{SPOOLER} -P $queue |";
-    my @lpq_output =
-	grep { !/^no entries/ && !(/^Rank\s+Owner/ .. /^\s*$/) } <F>;
-    close F;
-    @lpq_output;
-}
-
-sub lphelp_output {
-    my ($printer) = @_;
-    my $queue = $printer->{QUEUE};
-    my $lphelp = "/usr/bin/lphelp";
-
-    local *F; 
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "$lphelp $queue |";
-    $helptext = join("", <F>);
-    close F;
-    return $helptext;
-}
-
-sub pdqhelp_output {
-    my ($printer) = @_;
-    my $queue = $printer->{QUEUE};
-    my $pdq = "/usr/bin/pdq";
-
-    local *F; 
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "$pdq -h -P $queue  2>&1 |";
-    $helptext = join("", <F>);
-    close F;
-    return $helptext;
-}
-
-sub print_optionlist {
-    my ($printer) = @_;
-    my $queue = $printer->{QUEUE};
-    my $lpr = "/usr/bin/foomatic-printjob";
-
-    # Print the option list pages
-    if ($printer->{configured}{$queue}{queuedata}{foomatic}) {
-        run_program::rooted($prefix, $lpr, "-s", $printer->{SPOOLER},
-			    "-P", $queue, "-o", "docs",
-			    "/etc/bashrc");
-    } elsif ($printer->{configured}{$queue}{queuedata}{ppd}) {
-	system(($::testing ? "$prefix" : "chroot $prefix/ ") .
-	       "/usr/bin/lphelp $queue | " .
-	       ($::testing ? "$prefix" : "chroot $prefix/ ") .
-	       "$lpr -s $printer->{SPOOLER} -P $queue");
-    }
-}
-
-# ---------------------------------------------------------------
-#
-# Spooler config stuff
-#
-# ---------------------------------------------------------------
-
-sub get_copiable_queues {
-    my ($oldspooler, $newspooler) = @_;
-    local $_; #- use of while (<...
-
-    local *QUEUEOUTPUT; #- don't have to do close ... and don't modify globals
-                        #- at least
-    my @queuelist;      #- here we will list all Foomatic-generated queues
-    # Get queue list with foomatic-configure
-    open QUEUEOUTPUT, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	    "foomatic-configure -Q -q -s $oldspooler |" ||
-		die "Could not run foomatic-configure";
-
-    my $entry = {};
-    my $inentry = 0;
-    while (<QUEUEOUTPUT>) {
-	chomp;
-	if ($inentry) {
-	    # We are inside a queue entry
-	    if (m!^\s*</queue>\s*$!) {
-		# entry completed
-		$inentry = 0;
-		if (($entry->{foomatic}) && 
-		    ($entry->{spooler} eq $oldspooler)) {
-		    # Is the connection type supported by the new
-		    # spooler?
-		    if ((($newspooler eq "cups") &&
-			 (($entry->{connect} =~ /^file:/) ||
-			  ($entry->{connect} =~ /^lpd:/) ||
-			  ($entry->{connect} =~ /^socket:/) ||
-			  ($entry->{connect} =~ /^smb:/) ||
-			  ($entry->{connect} =~ /^ipp:/))) ||
-			((($newspooler eq "lpd") ||
-			  ($newspooler eq "lprng")) &&
-			 (($entry->{connect} =~ /^file:/) ||
-			  ($entry->{connect} =~ /^lpd:/) ||
-			  ($entry->{connect} =~ /^socket:/) ||
-			  ($entry->{connect} =~ /^smb:/) ||
-			  ($entry->{connect} =~ /^ncp:/) ||
-			  ($entry->{connect} =~ /^postpipe:/))) ||
-			(($newspooler eq "pdq") &&
-			 (($entry->{connect} =~ /^file:/) ||
-			  ($entry->{connect} =~ /^lpd:/) ||
-			  ($entry->{connect} =~ /^socket:/)))) {
-			push(@queuelist, $entry->{name});
-		    }
-		}
-		$entry = {};
-	    } elsif (m!^\s*<name>(.+)</name>\s*$!) {
-		    # queue name
-		    $entry->{name} = $1;
-	    } elsif (m!^\s*<connect>(.+)</connect>\s*$!) {
-		    # connection type (URI)
-		    $entry->{connect} = $1;
-	    }
-	} else {
-	    if (m!^\s*<queue\s+foomatic\s*=\s*\"?(\d+)\"?\s*spooler\s*=\s*\"?(\w+)\"?\s*>\s*$!) {
-		# new entry
-		$inentry = 1;
-		$entry->{foomatic} = $1;
-		$entry->{spooler} = $2;
-	    }
-	}
-    }
-    close QUEUEOUTPUT;
-    
-    return @queuelist;
-}
-
-sub copy_foomatic_queue {
-    my ($printer, $oldqueue, $oldspooler, $newqueue) = @_;
-    run_program::rooted($prefix, "foomatic-configure", "-q",
-		      "-s", $printer->{SPOOLER},
-		      "-n", $newqueue,
-			"-C", $oldspooler, $oldqueue);
-}
-
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/printerdrake.pm b/perl-install/printerdrake.pm
deleted file mode 100644
index c0520e486..000000000
--- a/perl-install/printerdrake.pm
+++ /dev/null
@@ -1,2196 +0,0 @@
-package printerdrake;
-# $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use detect_devices;
-use modules;
-use network;
-use log;
-use printer;
-
-1;
-
-sub choose_printer_type {
-    my ($printer, $in) = @_;
-    $in->set_help('configurePrinterConnected') if $::isInstall;
-    my $queue = $printer->{OLD_QUEUE};
-    $printer->{str_type} = $printer::printer_type_inv{$printer->{TYPE}};
-    $printer->{str_type} = 
-	$in->ask_from_list_(_("Select Printer Connection"),
-			    _("How is the printer connected?") .
-			    ($printer->{SPOOLER} eq "cups" ?
-			     _("
-Printers on remote CUPS servers you do not have to configure
-here; these printers will be automatically detected. Please
-select \"Printer on remote CUPS server\" in this case.") : ()),
-			    [ printer::printer_type($printer) ],
-			    $printer->{str_type},
-			    ) or return 0;
-    $printer->{TYPE} = $printer::printer_type{$printer->{str_type}};
-    1;
-}
-
-sub setup_remote_cups_server {
-    my ($printer, $in) = @_;
-
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in)) {return 0};
-
-    $in->set_help('configureRemoteCUPSServer') if $::isInstall;
-    my $queue = $printer->{OLD_QUEUE};
-    #- hack to handle cups remote server printing,
-    #- first read /etc/cups/cupsd.conf for variable BrowsePoll address:port
-    my ($server, $port, $default, $autoconf);
-    # Return value: 0 when nothing was changed ("Apply" never pressed), 1
-    # when "Apply" was at least pressed once.
-    my $retvalue = 0;
-    while (1) {
-	# Read CUPS config file
-	my @cupsd_conf = printer::read_cupsd_conf();
-	foreach (@cupsd_conf) {
-	    /^\s*BrowsePoll\s+(\S+)/ and $server = $1, last;
-	}
-	$server =~ /([^:]*):(.*)/ and ($server, $port) = ($1, $2);
-	# Read printer list
-	my @queuelist = printer::read_cups_printer_list();
-	if ($#queuelist >=0) {
-	    if ($printer->{DEFAULT} eq '') {
-		$default = printer::get_default_printer($printer);
-		if ($default) {
-		    # If a CUPS system has only remote printers and no default
-		    # printer defined, it defines the first printer whose
-		    # broadcast signal appeared after the start of the CUPS
-		    # daemon, so on every start another printer gets the
-		    # default printer. To avoid this, make sure that the
-		    # default printer is defined.
-		    $printer->{DEFAULT} = $default;
-		    printer::set_default_printer($printer);
-		}
-	    } else {
-		$default = $printer->{DEFAULT};
-	    }
-	    my $queue;
-	    for $queue (@queuelist) {
-		if ($queue =~ /^\s*$default/) {
-		    $default = $queue;
-		}
-	    }
-	    # The default printer setting should not be "None" when there
-	    # are printers
-	    if ($default eq _("None")) {
-		$default = _("Choose a default printer!");
-	    }
-	} else {
-	    push(@queuelist, _("None"));
-	    $default = _("None");
-	}
-	#- Did we have automatic or manual configuration mode for CUPS
-	$autoconf = printer::get_cups_autoconf();
-	#- Remember the server/port/autoconf settings to check whether the user
-        #- has changed them.
-	my $oldserver = $server;
-	my $oldport = $port;
-	my $oldautoconf = $autoconf;
-
-        #- then ask user for this combination and rewrite /etc/cups/cupsd.conf
-	#- according to new settings. There are no other point where such
-	#- information is written in this file.
-
-	if ($in->ask_from_
-	    ({ title => _("Remote CUPS server"),
-	       messages => _("With remote CUPS servers, you do not have to configure any 
-printer here; CUPS servers inform your machine automatically
-about their printers. All printers known to your machine
-currently are listed in the \"Default printer\" field. Choose
-the default printer for your machine there and click the
-\"Apply/Re-read printers\" button. Click the same button to
-refresh the list (it can take up to 30 seconds after the start
-of CUPS until all remote printers are visible).
-When your CUPS server is in a different network, you have to 
-give the CUPS server IP address and optionally the port number
-to get the printer information from the server, otherwise leave
-these fields blank.") .
-              ($::expert ? _("
-Normally, CUPS is automatically configured according to your
-network environment, so that you can access the printers on the
-CUPS servers in your local network. If this does not work 
-correctly, turn off \"Automatic CUPS configuration\" and edit
-your file /etc/cups/cupsd.conf manually. Do not forget to restart
-CUPS afterwards (command: \"service cups restart\").") : ()),
-              cancel => _("Close"),
-              ok => _("Apply/Re-read printers"),
-	      callbacks => { complete => sub {
-		 unless (!$server || network::is_ip($server)) {
-		     $in->ask_warn('', 
-			_("The IP address should look like 192.168.1.20"));
-		     return (1,0);
-		 }
-		 if ($port !~ /^\d*$/) {
-		     $in->ask_warn('',
-			_("The port number should be an integer!"));
-		     return (1,1);
-		 }
-		 return 0;
-	     } }
-	   },
-	     [	
-		{ label => _("Default printer"), val => \$default,
-		  not_edit => 0, list => \@queuelist},
-		#{ label => _("Default printer") },
-		#{ val => \$default,
-		#  format => \&translate, not_edit => 0, list => \@queuelist},
-		{ label => _("CUPS server IP"), val => \$server },
-		{ label => _("Port"), val => \$port },
-		($::expert ?
-		{ text => _("Automatic CUPS configuration"), type => 'bool',
-		  val => \$autoconf } : ()),
-		]
-	     )) {
-	    # We have clicked "Apply/Re-read"
-	    $retvalue = 1;
-	    # Set default printer
-	    if ($default =~ /^\s*([^\s\(\)]+)\s*\(/) {
-		$default = $1;
-	    }
-	    if (($default ne _("None")) &&
-		($default ne _("Choose a default printer!"))) {
-		$printer->{DEFAULT} = $default;
-	        printer::set_default_printer($printer);
-	    }
-	    # Set BrowsePoll line
-	    if (($server ne $oldserver) || ($port ne $oldport)) {
-		$server && $port and $server = "$server:$port";
-		if ($server) {
-		    @cupsd_conf = 
-			map { $server and 
-			      s/^\s*BrowsePoll\s+(\S+)/BrowsePoll $server/ and
-				  $server = '';
-			      $_ } @cupsd_conf;
-		    $server and push @cupsd_conf, "\nBrowsePoll $server\n";
-		} else {
-		    @cupsd_conf = 
-			map { s/^\s*BrowsePoll\s+(\S+)/\#BrowsePoll $1/;
-			      $_ } @cupsd_conf;
-		}
-	        printer::write_cupsd_conf(@cupsd_conf);
-		sleep 3;
-	    }
-	    # Set auto-configuration state
-	    if ($autoconf != $oldautoconf) {
-	        printer::set_cups_autoconf($autoconf);
-	    }
-	} else {
-	    last;
-	}
-    }
-    # Save user settings for auto-install
-    $printer->{BROWSEPOLLADDR} = $server;
-    $printer->{BROWSEPOLLPORT} = $port;
-    $printer->{MANUALCUPSCONFIG} = 1 - $autoconf;
-    return $retvalue;
-}
-
-sub setup_printer_connection {
-    my ($printer, $in) = @_;
-    # Choose the appropriate connection config dialog
-    my $done = 1;
-    for ($printer->{TYPE}) {
-	/LOCAL/     and setup_local    ($printer, $in) and last;
-	/LPD/       and setup_lpd      ($printer, $in) and last;
-	/SOCKET/    and setup_socket   ($printer, $in) and last;
-	/SMB/       and setup_smb      ($printer, $in) and last;
-	/NCP/       and setup_ncp      ($printer, $in) and last;
-	/URI/       and setup_uri      ($printer, $in) and last;
-	/POSTPIPE/  and setup_postpipe ($printer, $in) and last;
-	$done = 0; last;
-    }
-    return $done;
-}
-
-sub auto_detect {
-    my ($in) = @_;
-    {
-	my $w = $in->wait_message(_("Test ports"), _("Detecting devices ..."));
-	modules::get_alias("usb-interface") and eval { modules::load("printer"); sleep(2); };
-	foreach (qw(lp parport_pc parport_probe parport)) {
-	    eval { modules::unload($_); }; #- on kernel 2.4 parport has to be unloaded to probe again
-	}
-	foreach (qw(parport_pc lp parport_probe)) {
-	    eval { modules::load($_); }; #- take care as not available on 2.4 kernel (silent error).
-	}
-    }
-    my $b = before_leaving { eval { modules::unload("parport_probe") } };
-    detect_devices::whatPrinter();
-}
-
-
-sub setup_local {
-    my ($printer, $in) = @_;
-    my (@port, @str, $device);
-    my $queue = $printer->{OLD_QUEUE};
-    my @parport = auto_detect($in);
-    $in->set_help('setupLocal') if $::isInstall;
-    foreach (@parport) {
-	$_->{val}{DESCRIPTION} and push @str, _("A printer, model \"%s\", has been detected on ",
-						$_->{val}{DESCRIPTION}) . $_->{port};
-    }
-    if ($::expert || !@str) {
-	@port = detect_devices::whatPrinterPort();
-    } else {
-	@port = map { $_->{port} } grep { $_->{val}{DESCRIPTION} } @parport;
-    }
-    if (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m/^file:/)) {
-	$device = $printer->{currentqueue}{'connect'};
-	$device =~ s/^file://;
-    } elsif ($port[0]) {
-	$device = $port[0];
-    }
-    if ($in) {
-	$::expert or $in->set_help('configurePrinterDev') if $::isInstall;
-	return if !$in->ask_from(_("Local Printer Device"),
-_("What device is your printer connected to 
-(note that /dev/lp0 is equivalent to LPT1:)?\n") . (join "\n", @str), [
-{ label => _("Printer Device"), val => \$device, list => \@port, not_edit => !$::expert } ],
-complete => sub {
-    unless ($device ne "") {
-	$in->ask_warn('', _("Device/file name missing!"));
-	return (1,0);
-    }
-    return 0;
-}
-					     );
-    }
-
-    #- make the DeviceURI from $device.
-    $printer->{currentqueue}{'connect'} = "file:" . $device;
-
-    #- Read the printer driver database if necessary
-    if ((keys %printer::thedb) == 0) {
-	my $w = $in->wait_message('', _("Reading printer database ..."));
-        printer::read_printer_db($printer->{SPOOLER});
-    }
-
-    #- Search the database entry which matches the detected printer best
-    foreach (@parport) {
-	$device eq $_->{port} or next;
-	my $descr = $_->{val}{DESCRIPTION};
-	# Clean up the description from noise which makes the best match
-	# difficult
-	$descr =~ s/\s+Inc\.//;
-	$descr =~ s/\s+Corp\.//;
-	$descr =~ s/\s+SA\.//;
-	$descr =~ s/\s+S\.\s*A\.//;
-	$descr =~ s/\s+Ltd\.//;
-	$descr =~ s/\s+International//;
-	$descr =~ s/\s+Int\.//;
-	$descr =~ s/\s+\(?[Pp]rinter\)?$//;
-	
-        $printer->{DBENTRY} =
-            bestMatchSentence ($descr, keys %printer::thedb);
-        # If the manufacturer was not guessed correctly, discard the
-        # guess.
-        $printer->{DBENTRY} =~ /^([^\|]+)\|/;
-        my $guessedmake = lc($1);
-        if (($descr !~ /$guessedmake/i) &&
-            (($guessedmake ne "hp") ||
-             ($descr !~ /Hewlett[\s-]+Packard/i)))
-            {$printer->{DBENTRY} = ""};
-    }
-    1;
-}
-
-sub setup_lpd {
-    my ($printer, $in) = @_;
-
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in)) {return 0};
-
-    $in->set_help('setupLPD') if $::isInstall;
-    my ($uri, $remotehost, $remotequeue);
-    my $queue = $printer->{OLD_QUEUE};
-    if (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m/^lpd:/)) {
-	$uri = $printer->{currentqueue}{'connect'};
-	$uri =~ m!^\s*lpd://([^/]+)/([^/]+)/?\s*$!;
-	$remotehost = $1;
-	$remotequeue = $2;
-    } else {
-	$remotehost = "";
-	$remotequeue = "lp";
-    }
-
-    return if !$in->ask_from(_("Remote lpd Printer Options"),
-_("To use a remote lpd printer, you need to supply
-the hostname of the printer server and the printer name
-on that server."), [
-{ label => _("Remote host name"), val => \$remotehost },
-{ label => _("Remote printer name"), val => \$remotequeue } ],
-complete => sub {
-    unless ($remotehost ne "") {
-	$in->ask_warn('', _("Remote host name missing!"));
-	return (1,0);
-    }
-    unless ($remotequeue ne "") {
-	$in->ask_warn('', _("Remote printer name missing!"));
-	return (1,1);
-    }
-    return 0;
-}
-			      );
-    #- make the DeviceURI from user input.
-    $printer->{currentqueue}{'connect'} = 
-        "lpd://$remotehost/$remotequeue";
-
-    #- LPD does not support filtered queues to a remote LPD server by itself
-    #- It needs an additional program as "rlpr"
-    if (($printer->{SPOOLER} eq 'lpd') && (!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/rlpr))))) {
-        $in->do_pkgs->install('rlpr');
-    }
-
-    1;
-}
-
-sub setup_smb {
-    my ($printer, $in) = @_;
-
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in)) {return 0};
-
-    $in->set_help('setupSMB') if $::isInstall;
-    my ($uri, $smbuser, $smbpassword, $workgroup, $smbserver, $smbserverip, $smbshare);
-    my $queue = $printer->{OLD_QUEUE};
-    if (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m/^smb:/)) {
-	$uri = $printer->{currentqueue}{'connect'};
-	$uri =~ m!^\s*smb://(.*)$!;
-	my $parameters = $1;
-	# Get the user's login and password from the URI
-	if ($parameters =~ m!([^@]*)@([^@]+)!) {
-	    my $login = $1;
-	    $parameters = $2;
-	    if ($login =~ m!([^:]*):([^:]*)!) {
-		$smbuser = $1;
-		$smbpassword = $2;
-	    } else {
-		$smbuser = $login;
-		$smbpassword = "";
-	    }
-	} else {
-	    $smbuser = "";
-	    $smbpassword = "";
-	}
-	# Get the workgroup, server, and share name
-	if ($parameters =~ m!([^/]*)/([^/]+)/([^/]+)$!) {
-	    $workgroup = $1;
-	    $smbserver = $2;
-	    $smbshare = $3;
-	} elsif ($parameters =~ m!([^/]+)/([^/]+)$!) {
-	    $workgroup = "";
-	    $smbserver = $1;
-	    $smbshare = $2;
-	} else {
-	    die "The \"smb://\" URI must at least contain the server name and the share name!\n";
-	}
-	if (network::is_ip($smbserver)) {
-	    $smbserverip = $smbserver;
-	    $smbserver = "";
-	}
-    }
-
-    return if !$in->ask_from(_("SMB (Windows 9x/NT) Printer Options"),
-_("To print to a SMB printer, you need to provide the
-SMB host name (Note! It may be different from its
-TCP/IP hostname!) and possibly the IP address of the print server, as
-well as the share name for the printer you wish to access and any
-applicable user name, password, and workgroup information."), [
-{ label => _("SMB server host"), val => \$smbserver },
-{ label => _("SMB server IP"), val => \$smbserverip },
-{ label => _("Share name"), val => \$smbshare },
-{ label => _("User name"), val => \$smbuser },
-{ label => _("Password"), val => \$smbpassword, hidden => 1 },
-{ label => _("Workgroup"), val => \$workgroup }, ],
-complete => sub {
-    unless ((network::is_ip($smbserverip)) || ($smbserverip eq "")) {
-	$in->ask_warn('', _("IP address should be in format 1.2.3.4"));
-	return (1,1);
-    }
-    unless (($smbserver ne "") || ($smbserverip ne "")) {
-	$in->ask_warn('', _("Either the server name or the server's IP must be given!"));
-	return (1,0);
-    }
-    unless ($smbshare ne "") {
-	$in->ask_warn('', _("Samba share name missing!"));
-	return (1,2);
-    }
-    return 0;
-}
-    );
-    #- make the DeviceURI from, try to probe for available variable to
-    #- build a suitable URI.
-    $printer->{currentqueue}{'connect'} =
-    join '', ("smb://", ($smbuser && ($smbuser . 
-    ($smbpassword && ":$smbpassword") . "@")), ($workgroup && ("$workgroup/")),
-    ($smbserver || $smbserverip), "/$smbshare");
-
-    if ((!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/smbclient))))) {
-	$in->do_pkgs->install('samba-client');
-    }
-    $printer->{SPOOLER} eq 'cups' and printer::restart_queue($printer);
-    1;
-}
-
-sub setup_ncp {
-    my ($printer, $in) = @_;
-
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in)) {return 0};
-
-    $in->set_help('setupNCP') if $::isInstall;
-    my ($uri, $ncpuser, $ncppassword, $ncpserver, $ncpqueue);
-    my $queue = $printer->{OLD_QUEUE};
-    if (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m/^ncp:/)) {
-	$uri = $printer->{currentqueue}{'connect'};
-	my $parameters = $uri =~ m!^\s*ncp://(.*)$!;
-	# Get the user's login and password from the URI
-	if ($parameters =~ m!([^@]*)@([^@]+)!) {
-	    my $login = $1;
-	    $parameters = $2;
-	    if ($login =~ m!([^:]*):([^:]*)!) {
-		$ncpuser = $1;
-		$ncppassword = $2;
-	    } else {
-		$ncpuser = $login;
-		$ncppassword = "";
-	    }
-	} else {
-	    $ncpuser = "";
-	    $ncppassword = "";
-	}
-	# Get the workgroup, server, and share name
-	if ($parameters =~ m!([^/]+)/([^/]+)$!) {
-	    $ncpserver = $1;
-	    $ncpqueue = $2;
-	} else {
-	    die "The \"ncp://\" URI must at least contain the server name and the share name!\n";
-	}
-    }
-
-    return if !$in->ask_from(_("NetWare Printer Options"),
-_("To print on a NetWare printer, you need to provide the
-NetWare print server name (Note! it may be different from its
-TCP/IP hostname!) as well as the print queue name for the printer you
-wish to access and any applicable user name and password."), [
-{ label => _("Printer Server"), val => \$ncpserver },
-{ label => _("Print Queue Name"), val => \$ncpqueue },
-{ label => _("User name"), val => \$ncpuser },
-{ label => _("Password"), val => \$ncppassword, hidden => 1 } ],
-complete => sub {
-    unless ($ncpserver ne "") {
-	$in->ask_warn('', _("NCP server name missing!"));
-	return (1,0);
-    }
-    unless ($ncpqueue ne "") {
-	$in->ask_warn('', _("NCP queue name missing!"));
-	return (1,1);
-    }
-    return 0;
-}
-					);
-    # Generate the Foomatic URI
-    $printer->{currentqueue}{'connect'} =
-    join '', ("ncp://", ($ncpuser && ($ncpuser . 
-    ($ncppassword && ":$ncppassword") . "@")),
-    "$ncpserver/$ncpqueue");
-
-    if ((!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/nprint))))) {
-	$in->do_pkgs->install('ncpfs');
-    }
-
-    1;
-}
-
-sub setup_socket {
-    my ($printer, $in) = @_;
-
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in)) {return 0};
-
-    $in->set_help('setupSocket') if $::isInstall;
-    my ($hostname, $port, $uri, $remotehost,$remoteport);
-    my $queue = $printer->{OLD_QUEUE};
-    if (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m/^socket:/)) {
-	$uri = $printer->{currentqueue}{'connect'};
-	($remotehost, $remoteport) = $uri =~ m!^\s*socket://([^/:]+):([0-9]+)/?\s*$!;
-    } else {
-	$remotehost = "";
-	$remoteport = "9100";
-    }
-
-    return if !$in->ask_from(_("Socket Printer Options"),
-_("To print to a socket printer, you need to provide the
-host name of the printer and optionally the port number.
-On HP JetDirect servers the port number is usually 9100,
-on other servers it can vary. See the manual of your
-hardware."), [
-{ label => _("Printer host name"), val => \$remotehost },
-{ label => _("Port"), val => \$remoteport } ],
-complete => sub {
-    unless ($remotehost ne "") {
-	$in->ask_warn('', _("Printer host name missing!"));
-	return (1,0);
-    }
-    unless ($remoteport =~ /^[0-9]+$/) {
-	$in->ask_warn('', _("The port number should be an integer!"));
-	return (1,1);
-    }
-    return 0;
-}
-					 );
-
-    #- make the Foomatic URI
-    $printer->{currentqueue}{'connect'} = 
-    join '', ("socket://$remotehost", $remoteport ? (":$remoteport") : ());
-
-    #- LPD and LPRng need netcat ('nc') to access to socket printers
-    if ((($printer->{SPOOLER} eq 'lpd') || ($printer->{SPOOLER} eq 'lprng'))&& 
-        (!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/nc))))) {
-        $in->do_pkgs->install('nc');
-    }
-
-    1;
-}
-
-sub setup_uri {
-    my ($printer, $in) = @_;
-
-    $in->set_help('setupURI') if $::isInstall;
-    return if !$in->ask_from(_("Printer Device URI"),
-_("You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers."), [
-{ label => _("Printer Device URI"),
-val => \$printer->{currentqueue}{'connect'},
-list => [ $printer->{currentqueue}{'connect'},
-	  "file:/",
-	  "http://",
-	  "ipp://",
-	  "lpd://",
-	  "smb://",
-	  "ncp://",
-	  "socket://",
-	  "postpipe:\"\"",
-	  ], not_edit => 0 }, ],
-complete => sub {
-    unless ($printer->{currentqueue}{'connect'} =~ /[^:]+:.+/) {
-	$in->ask_warn('', _("A valid URI must be entered!"));
-	return (1,0);
-    }
-    return 0;
-}
-    );
-
-    # Non-local printer, check network and abort if no network available
-    if (($printer->{currentqueue}{'connect'} !~ m!^file:/!) &&
-        (!check_network($printer, $in))) {return 0};
-
-    # If the chosen protocol needs additional software, install it.
-
-    # LPD does not support filtered queues to a remote LPD server by itself
-    # It needs an additional program as "rlpr"
-    if (($printer->{currentqueue}{'connect'} =~ /^lpd:/) &&
-	($printer->{SPOOLER} eq 'lpd') && (!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/rlpr))))) {
-        $in->do_pkgs->install('rlpr');
-    }
-    if (($printer->{currentqueue}{'connect'} =~ /^smb:/) &&
-        (!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/smbclient))))) {
-	$in->do_pkgs->install('samba-client');
-    }
-    if (($printer->{currentqueue}{'connect'} =~ /^ncp:/) &&
-	(!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/nprint))))) {
-	$in->do_pkgs->install('ncpfs');
-    }
-    #- LPD and LPRng need netcat ('nc') to access to socket printers
-    if (($printer->{currentqueue}{'connect'} =~ /^socket:/) &&
-	(($printer->{SPOOLER} eq 'lpd') || ($printer->{SPOOLER} eq 'lprng')) &&
-        (!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/nc))))) {
-        $in->do_pkgs->install('nc');
-    }
-    1;
-}
-
-sub setup_postpipe {
-    my ($printer, $in) = @_;
-
-    $in->set_help('setupPostpipe') if $::isInstall;
-    my $uri;
-    my $commandline;
-    my $queue = $printer->{OLD_QUEUE};
-    if (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m/^postpipe:/)) {
-	$uri = $printer->{currentqueue}{'connect'};
-	$uri =~ m!^\s*postpipe:\"(.*)\"$!;
-	$commandline = $1;
-    } else {
-	$commandline = "";
-    }
-
-    return if !$in->ask_from(_("Pipe into command"),
-_("Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer."), [
-{ label => _("Command line"),
-val => \$commandline }, ],
-complete => sub {
-    unless ($commandline ne "") {
-	$in->ask_warn('', _("A command line must be entered!"));
-	return (1,0);
-    }
-    return 0;
-}
-);
-
-    #- make the Foomatic URI
-    $printer->{currentqueue}{'connect'} = "postpipe:$commandline";
-    
-    1;
-}
-
-sub choose_printer_name {
-    my ($printer, $in) = @_;
-    # Name, description, location
-    $in->set_help('setupPrinterName') if $::isInstall;
-    my $default = $printer->{currentqueue}{'queue'};
-    $in->ask_from_
-	(
-	 { title => _("Enter Printer Name and Comments"),
-	   #cancel => !$printer->{configured}{$queue} ? '' : _("Remove queue"),
-	   callbacks => { complete => sub {
-	       unless ($printer->{currentqueue}{'queue'} =~ /^\w+$/) {
-		   $in->ask_warn('', _("Name of printer should contain only letters, numbers and the underscore"));
-		   return (1,0);
-	       }
-	       if (($printer->{configured}{$printer->{currentqueue}{'queue'}})
-		   && ($printer->{currentqueue}{'queue'} ne $default) && 
-		   (!$in->ask_yesorno('', _("The printer \"%s\" already exists,\ndo you really want to overwrite its configuration?",
-					    $printer->{currentqueue}{'queue'}),
-				      0))) {
-		   return (1,0); # Let the user correct the name
-	       }
-	       return 0;
-	   },
-		      },
-	   messages =>
-_("Every printer needs a name (for example lp).
-The Description and Location fields do not need 
-to be filled in. They are comments for the users.") }, 
-	 [ { label => _("Name of printer"), val => \$printer->{currentqueue}{'queue'} },
-	   { label => _("Description"), val => \$printer->{currentqueue}{'desc'} },
-	   { label => _("Location"), val => \$printer->{currentqueue}{'loc'} },
-	 ]) or return 0;
-
-    $printer->{QUEUE} = $printer->{currentqueue}{'queue'};
-    1;
-}
-
-sub get_db_entry {
-    my ($printer, $in) = @_;
-    #- Read the printer driver database if necessary
-    if ((keys %printer::thedb) == 0) {
-	my $w = $in->wait_message('', _("Reading printer database ..."));
-        printer::read_printer_db($printer->{SPOOLER});
-    }
-    my $w = $in->wait_message('', _("Preparing printer database ..."));
-    my $queue = $printer->{OLD_QUEUE};
-    if ($printer->{configured}{$queue}) {
-	# The queue was already configured
-	if ($printer->{configured}{$queue}{'queuedata'}{'foomatic'}) {
-	    # The queue was configured with Foomatic
-	    my $driverstr;
-	    if ($printer->{configured}{$queue}{'queuedata'}{'driver'} eq "Postscript") {
-		$driverstr = "PostScript";
-	    } else {
-		$driverstr = "GhostScript + $printer->{configured}{$queue}{'queuedata'}{'driver'}";
-	    }
-	    my $make = uc($printer->{configured}{$queue}{'queuedata'}{'make'});
-	    my $model =	$printer->{configured}{$queue}{'queuedata'}{'model'};
-	    if ($::expert) {
-		$printer->{DBENTRY} = "$make|$model|$driverstr";
-		# database key contains the "(recommended)" for the
-		# recommended driver, so add it if necessary
-		if (!($printer::thedb{$printer->{DBENTRY}}{printer})) {
-		    $printer->{DBENTRY} .= " (recommended)";
-		}
-	    } else {
-		$printer->{DBENTRY} = "$make|$model";
-	    }
-	    $printer->{OLD_CHOICE} = $printer->{DBENTRY};
-	} elsif (($printer->{SPOOLER} eq "cups") && ($::expert) &&
-		 ($printer->{configured}{$queue}{'queuedata'}{'ppd'})) {
-	    # Do we have a native CUPS driver or a PostScript PPD file?
-	    $printer->{DBENTRY} = printer::get_descr_from_ppd($printer) || $printer->{DBENTRY};
-	    $printer->{OLD_CHOICE} = $printer->{DBENTRY};
-	} else {
-	    # Point the list cursor at least to manufacturer and model of the
-	    # printer
-	    $printer->{DBENTRY} = "";
-	    my $make = uc($printer->{configured}{$queue}{'queuedata'}{'make'});
-	    my $model = $printer->{configured}{$queue}{'queuedata'}{'model'};
-	    my $key;
-	    for $key (keys %printer::thedb) {
-		if ((($::expert) && ($key =~ /^$make\|$model\|.*\(recommended\)$/)) ||
-		    ((!$::expert) && ($key =~ /^$make\|$model$/))) {
-		    $printer->{DBENTRY} = $key;
-		}
-	    }
-	    if ($printer->{DBENTRY} eq "") {
-		# Exact match of make and model did not work, try to clean
-		# up the model name
-		$model =~ s/PS//;
-		$model =~ s/PostScript//;
-		$model =~ s/Series//;
-		for $key (keys %printer::thedb) {
-		    if ((($::expert) && ($key =~ /^$make\|$model\|.*\(recommended\)$/)) ||
-			((!$::expert) && ($key =~ /^$make\|$model$/))) {
-			$printer->{DBENTRY} = $key;
-		    }
-		}
-	    }
-	    if (($printer->{DBENTRY} eq "") && ($make ne "")) {
-		# Exact match with cleaned-up model did not work, try a best match
-		my $matchstr = "$make|$model";
-		$printer->{DBENTRY} = bestMatchSentence($matchstr, keys %printer::thedb);
-		# If the manufacturer was not guessed correctly, discard the
-		# guess.
-		$printer->{DBENTRY} =~ /^([^\|]+)\|/;
-		my $guessedmake = lc($1);
-		if (($matchstr !~ /$guessedmake/i) &&
-		    (($guessedmake ne "hp") ||
-		     ($matchstr !~ /Hewlett[\s-]+Packard/i)))
-		{$printer->{DBENTRY} = ""};
-	    }
-	    # Set the OLD_CHOICE to a non-existing value
-	    $printer->{OLD_CHOICE} = "XXX";
-	}
-    } else {
-	if (($::expert) && ($printer->{DBENTRY} !~ /(recommended)/)) {
-	    my ($make, $model) = $printer->{DBENTRY} =~ /^([^\|]+)\|([^\|]+)\|/;
-	    for my $key (keys %printer::thedb) {
-		if ($key =~ /^$make\|$model\|.*\(recommended\)$/) {
-		    $printer->{DBENTRY} = $key;
-		}
-	    }
-	}
-	$printer->{OLD_CHOICE} = $printer->{DBENTRY};
-    }
-}
-
-sub choose_model {
-    my ($printer, $in) = @_;
-    $in->set_help('chooseModel') if $::isInstall;
-    #- Read the printer driver database if necessary
-    if ((keys %printer::thedb) == 0) {
-	my $w = $in->wait_message('', _("Reading printer database ..."));
-        printer::read_printer_db($printer->{SPOOLER});
-    }
-    if (!$printer::thedb{$printer->{DBENTRY}}) {
-	$printer->{DBENTRY} = _("Raw printer (No driver)");
-    }
-    # Choose the printer/driver from the list
-    return ($printer->{DBENTRY} = $in->ask_from_treelist(_("Printer model selection"),
-							 _("Which printer model do you have?") .
-							 _("
-
-Please check whether Printerdrake did the 
-auto-detection of your printer model
-correctly. Search the correct model in the
-list when the cursor is standing on a 
-wrong model or on \"Raw printer\"."), '|',
-							 [ keys %printer::thedb ], $printer->{DBENTRY}));
-
-}
-
-sub get_printer_info {
-    my ($printer, $in) = @_;
-    #- Read the printer driver database if necessary
-    #if ((keys %printer::thedb) == 0) {
-    #    my $w = $in->wait_message('', _("Reading printer database ..."));
-    #    printer::read_printer_db($printer->{SPOOLER});
-    #}
-    my $queue = $printer->{OLD_QUEUE};
-    my $oldchoice = $printer->{OLD_CHOICE};
-    my $newdriver = 0;
-    if ((!$printer->{configured}{$queue}) ||      # New queue  or
-	(($oldchoice) && ($printer->{DBENTRY}) && # make/model/driver changed
-	 (($oldchoice ne $printer->{DBENTRY}) ||
-	  ($printer->{currentqueue}{'driver'} ne 
-	   $printer::thedb{$printer->{DBENTRY}}{'driver'})))) {
-	delete($printer->{currentqueue}{printer});
-	delete($printer->{currentqueue}{ppd});
-	$printer->{currentqueue}{foomatic} = 0;
-	# Read info from printer database
-	foreach (qw(printer ppd driver make model)) { #- copy some parameter, shorter that way...
-	    $printer->{currentqueue}{$_} = $printer::thedb{$printer->{DBENTRY}}{$_};
-	}
-	$newdriver = 1;
-    }
-    # Use the "printer" and not the "foomatic" field to identify a Foomatic
-    # queue because in a new queue "foomatic" is not set yet.
-    if (($printer->{currentqueue}{'printer'}) || # We have a Foomatic queue
-	($printer->{currentqueue}{'ppd'})) { # We have a CUPS+PPD queue
-	if ($printer->{currentqueue}{'printer'}) { # Foomatic queue?
-	    # In case of a new queue "foomatic" was not set yet
-	    $printer->{currentqueue}{'foomatic'} = 1;
-	    # Now get the options for this printer/driver combo
-	    if (($printer->{configured}{$queue}) && ($printer->{configured}{$queue}{'queuedata'}{'foomatic'})) {
-		# The queue was already configured with Foomatic ...
-		if (!$newdriver) {
-		    # ... and the user didn't change the printer/driver
-		    $printer->{ARGS} = $printer->{configured}{$queue}{'args'};
-		} else {
-		    # ... and the user has chosen another printer/driver
-		    $printer->{ARGS} = printer::read_foomatic_options($printer);
-		}
-	    } else {
-		# The queue was not configured with Foomatic before
-		# Set some special options
-		$printer->{SPECIAL_OPTIONS} = '';
-		# Default page size depending on the country/language
-		# (US/Canada -> Letter, Others -> A4)
-		my $pagesize;
-		if ($printer->{PAPERSIZE}) {
-		    $printer->{SPECIAL_OPTIONS} .= 
-			" -o PageSize=$printer->{PAPERSIZE}";
-		} elsif (($in->{lang}) ||
-			 ($pagesize = $ENV{'LC_PAPER'}) ||
-			 ($pagesize = $ENV{'LANG'}) ||
-			 ($pagesize = $ENV{'LANGUAGE'}) ||
-			 ($pagesize = $ENV{'LC_ALL'})) {
-		    if (($pagesize eq 'en') || ($pagesize eq 'en_US')) {
-			$pagesize = "Letter";
-		    } else {
-			$pagesize = "A4";
-		    }
-		    $printer->{SPECIAL_OPTIONS} .= 
-			" -o PageSize=$pagesize";
-		}
-		# oki4w driver -> OKI winprinter which needs the
-		# oki4daemon to work
-		if ($printer->{currentqueue}{'driver'} eq 'oki4w') {
-		    if ($printer->{currentqueue}{'connect'} ne 
-			'file:/dev/lp0') {
-			$in->ask_warn(_("OKI winprinter configuration"),
-				      _("You are configuring an OKI laser winprinter. These printers\nuse a very special communication protocol and therefore they
-work only when connected to the first parallel port. When
-your printer is connected to another port or to a print
-server box please connect the printer to the first parallel
-port before you print a test page. Otherwise the printer
-will not work. Your connection type setting will be ignored
-by the driver."));
-		    }
-		    $printer->{currentqueue}{'connect'} = 'file:/dev/null';
-		    # Start the oki4daemon
-		    printer::start_service_on_boot('oki4daemon');
-		    printer::start_service('oki4daemon');
-		    # Set permissions
-		    if ($printer->{SPOOLER} eq 'cups') {
-			printer::set_permissions('/dev/oki4drv', '660', 'lp',
-						 'sys');
-		    } elsif ($printer->{SPOOLER} eq 'pdq') {
-			printer::set_permissions('/dev/oki4drv', '666');
-		    } else {
-			printer::set_permissions('/dev/oki4drv', '660', 'lp',
-						 'lp');
-		    }
-		} elsif ($printer->{currentqueue}{'driver'} eq 'lexmarkinkjet') {
-		    # Set "Port" option
-		    if ($printer->{currentqueue}{'connect'} eq 
-			'file:/dev/lp0') {
-			$printer->{SPECIAL_OPTIONS} .= 
-			    " -o Port=ParPort1";
-		    } elsif ($printer->{currentqueue}{'connect'} eq 
-			'file:/dev/lp1') {
-			$printer->{SPECIAL_OPTIONS} .= 
-			    " -o Port=ParPort2";
-		    } elsif ($printer->{currentqueue}{'connect'} eq 
-			'file:/dev/lp2') {
-			$printer->{SPECIAL_OPTIONS} .= 
-			    " -o Port=ParPort3";
-		    } elsif ($printer->{currentqueue}{'connect'} eq 
-			'file:/dev/usb/lp0') {
-			$printer->{SPECIAL_OPTIONS} .= 
-			    " -o Port=USB1";
-		    } elsif ($printer->{currentqueue}{'connect'} eq 
-			'file:/dev/usb/lp1') {
-			$printer->{SPECIAL_OPTIONS} .= 
-			    " -o Port=USB2";
-		    } elsif ($printer->{currentqueue}{'connect'} eq 
-			'file:/dev/usb/lp2') {
-			$printer->{SPECIAL_OPTIONS} .= 
-			    " -o Port=USB3";
-		    } else {
-			$in->ask_warn(_("Lexmark inkjet configuration"),
-				      _("The inkjet printer drivers provided by Lexmark only support
-local printers, no printers on remote machines or print server
-boxes. Please connect your printer to a local port or
-configure it on the machine where it is connected to."));
-			return 0;
-		    }
-		    # Set device permissions
-		    $printer->{currentqueue}{'connect'} =~ /^\s*file:(\S*)\s*$/;
-		    if ($printer->{SPOOLER} eq 'cups') {
-			printer::set_permissions($1, '660', 'lp', 'sys');
-		    } elsif ($printer->{SPOOLER} eq 'pdq') {
-			printer::set_permissions($1, '666');
-		    } else {
-			printer::set_permissions($1, '660', 'lp', 'lp');
-		    }
-		    # This is needed to have the device not blocked by the
-		    # spooler backend.
-		    $printer->{currentqueue}{'connect'} = 'file:/dev/null';
-		    #install packages
-		    my $drivertype = $printer->{currentqueue}{'model'};
-		    if ($drivertype eq 'Z22') {$drivertype = 'Z32';}
-		    if ($drivertype eq 'Z23') {$drivertype = 'Z33';}
-		    $drivertype = lc($drivertype);
-		    if (!printer::files_exist("/usr/local/lexmark/$drivertype/$drivertype")) {
-			eval { $in->do_pkgs->install("lexmark-drivers-$drivertype") };
-		    }
-		    if (!printer::files_exist("/usr/local/lexmark/$drivertype/$drivertype")) {
-			# Driver installation failed, probably we do not have
-			# the commercial CDs
-			$in->ask_warn(_("Lexmark inkjet configuration"),
-				      _("To be able to print with your Lexmark inkjet and this
-configuration, you need the inkjet printer drivers
-provided by Lexmark (http://www.lexmark.com/). Go to
-the US site and click on the \"Drivers\" button. Then
-choose your model and afterwards \"Linux\" as
-operating system. The drivers come as RPM packages
-or shell scripts with interactive graphical installation.
-You do not need to do this configuration by the
-graphical frontends. Cancel directly after the license
-agreement. Then print printhead alignment pages with
-\"lexmarkmaintain\" and adjust the head alignment
-settings with this program."));
-		    }
-		}
-		$printer->{ARGS} = printer::read_foomatic_options($printer);
-		delete($printer->{SPECIAL_OPTIONS});
-	    }
-	} elsif ($printer->{currentqueue}{'ppd'}) { # CUPS+PPD queue?
-	    # If we had a Foomatic queue before, unmark the flag and initialize
-	    # the "printer" and "driver" fields
-	    $printer->{currentqueue}{'foomatic'} = 0;
-	    $printer->{currentqueue}{'printer'} = undef;
-	    $printer->{currentqueue}{'driver'} = "CUPS/PPD";
-	    # Now get the options from this PPD file
-	    if ($printer->{configured}{$queue}) {
-		# The queue was already configured
-		if ((!$printer->{DBENTRY}) || (!$oldchoice) ||
-		    ($printer->{DBENTRY} eq $oldchoice)) {
-		    # ... and the user didn't change the printer/driver
-		    $printer->{ARGS} = printer::read_cups_options($queue);
-		} else {
-		    # ... and the user has chosen another printer/driver
-		    $printer->{ARGS} = printer::read_cups_options("/usr/share/cups/model/$printer->{currentqueue}{ppd}");
-		}
-	    } else {
-		# The queue was not configured before
-		$printer->{ARGS} = printer::read_cups_options("/usr/share/cups/model/$printer->{currentqueue}{ppd}");
-	    }
-	}
-    }
-    1;
-}
-
-sub setup_options {
-    my ($printer, $in) = @_;
-    $in->set_help('setupOptions') if $::isInstall;
-    if (($printer->{currentqueue}{'printer'}) || # We have a Foomatic queue
-	($printer->{currentqueue}{'ppd'})) { # We have a CUPS+PPD queue
-	# Set up the widgets for the option dialog
-	my @widgets;
-	my @userinputs;
-	my @choicelists;
-	my @shortchoicelists;
-	my $i;
-	for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) {
-	    my $optshortdefault = $printer->{ARGS}[$i]{'default'};
-	    if ($printer->{ARGS}[$i]{'type'} eq 'enum') {
-		# enumerated option
-		push(@choicelists, []);
-		push(@shortchoicelists, []);
-		my $choice;
-		for $choice (@{$printer->{ARGS}[$i]{'vals'}}) {
-		    push(@{$choicelists[$i]}, $choice->{'comment'});
-		    push(@{$shortchoicelists[$i]}, $choice->{'value'});
-		    if ($choice->{'value'} eq $optshortdefault) {
-			push(@userinputs, $choice->{'comment'});
-		    }
-		}
-		push(@widgets,
-		     { label => $printer->{ARGS}[$i]{'comment'}, 
-		       val => \$userinputs[$i], 
-		       not_edit => 1,
-		       list => \@{$choicelists[$i]} });
-	    } elsif ($printer->{ARGS}[$i]{'type'} eq 'bool') {
-		# boolean option
-		push(@choicelists, [$printer->{ARGS}[$i]{'name'}, 
-				    $printer->{ARGS}[$i]{'name_false'}]);
-		push(@shortchoicelists, []);
-		push(@userinputs, $choicelists[$i][1-$optshortdefault]);
-		push(@widgets,
-		     { label => $printer->{ARGS}[$i]{'comment'},
-		       val => \$userinputs[$i],
-		       not_edit => 1,
-		       list => \@{$choicelists[$i]} });
-	    } else {
-		# numerical option
-		push(@choicelists, []);
-		push(@shortchoicelists, []);
-		push(@userinputs, $optshortdefault);
-		push(@widgets,
-		     { label => $printer->{ARGS}[$i]{'comment'} . 
-			   " ($printer->{ARGS}[$i]{'min'} ... " .
-			       "$printer->{ARGS}[$i]{'max'})",
-			       #type => 'range',
-			       #min => $printer->{ARGS}[$i]{'min'},
-			       #max => $printer->{ARGS}[$i]{'max'},
-			       val => \$userinputs[$i] } );
-	    }
-	}
-	# Show the options dialog. The call-back function does a
-	# range check of the numerical options.
-	my $windowtitle = "$printer->{currentqueue}{'make'} $printer->{currentqueue}{'model'}";
-	if ($::expert) {
-	    my $driver = undef;
-	    if ($driver = $printer->{currentqueue}{driver}) {
-		if ($printer->{currentqueue}{foomatic}) {
-		    if ($driver eq 'Postscript') {
-			$driver = "PostScript";
-		    } else {
-			$driver = "GhostScript + $driver";
-		    }
-		} elsif ($printer->{currentqueue}{ppd}) {
-		    if ($printer->{DBENTRY}) {
-			$printer->{DBENTRY} =~ /^[^\|]*\|[^\|]*\|(.*)$/;
-			$driver = $1;
-		    } else {
-			$driver = printer::get_descr_from_ppd($printer);
-			if ($driver =~ /^[^\|]*\|[^\|]*$/) { # No driver info
-			    $driver = "CUPS/PPD";
-			} else {
-			    $driver =~ /^[^\|]*\|[^\|]*\|(.*)$/;
-			    $driver = $1;
-			}
-		    }
-		}
-	    } 
-	    if ($driver) {
-		$windowtitle .= ", $driver";
-	    }
-	}
-	return 0 if !$in->ask_from
-	    ($windowtitle,
-	     _("Printer default settings
-You should make sure that the page size and the
-ink type (if available) are set correctly. Note
-that with a very high printout quality printing
-can get substantially slower."),
-	     \@widgets,
-	     complete => sub {
-		 my $i;
-		 for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) {
-		     if (($printer->{ARGS}[$i]{'type'} eq 'int') || ($printer->{ARGS}[$i]{'type'} eq 'float')) {
-			 unless (($printer->{ARGS}[$i]{'type'} ne 'int') || ($userinputs[$i] =~ /^[\-\+]?[0-9]+$/)) {
-			     $in->ask_warn('', _("Option %s must be an integer number!", $printer->{ARGS}[$i]{'comment'}));
-			     return (1, $i);
-			 }
-			 unless (($printer->{ARGS}[$i]{'type'} ne 'float') || ($userinputs[$i] =~ /^[\-\+]?[0-9\.]+$/)) {
-			     $in->ask_warn('', _("Option %s must be a number!", $printer->{ARGS}[$i]{'comment'}));
-			     return (1, $i);
-			 }
-			 unless (($userinputs[$i] >= $printer->{ARGS}[$i]{'min'}) &&
-				 ($userinputs[$i] <= $printer->{ARGS}[$i]{'max'})) {
-			     $in->ask_warn('', _("Option %s out of range!", $printer->{ARGS}[$i]{'comment'}));
-			     return (1, $i);
-			 }
-		     }
-		 }
-		 return (0);
-	     } );
-	# Read out the user's choices
-	@{$printer->{currentqueue}{options}} = ();
-	for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) {
-	    push(@{$printer->{currentqueue}{options}}, "-o");
-	    if ($printer->{ARGS}[$i]{'type'} eq 'enum') {
-		# enumerated option
-		my $j;
-		for ($j = 0; $j <= $#{$choicelists[$i]}; $j++) {
-		    if ($choicelists[$i][$j] eq $userinputs[$i]) {
-			push(@{$printer->{currentqueue}{options}}, $printer->{ARGS}[$i]{'name'} . "=". $shortchoicelists[$i][$j]);
-		    }
-		}
-	    } elsif ($printer->{ARGS}[$i]{'type'} eq 'bool') {
-		# boolean option
-		push(@{$printer->{currentqueue}{options}}, $printer->{ARGS}[$i]{'name'} . "=".
-		     (($choicelists[$i][0] eq $userinputs[$i]) ? "1" : "0"));
-	    } else {
-		# numerical option
-		push(@{$printer->{currentqueue}{options}}, $printer->{ARGS}[$i]{'name'} . "=" . $userinputs[$i]);
-	    }
-	}
-    }
-    1;
-}
-
-sub setasdefault {
-    my ($printer, $in) = @_;
-    $in->set_help('setupAsDefault') if $::isInstall;
-    if (($printer->{DEFAULT} eq '') || # We have no default printer,
-	                               # so set the current one as default
-	($in->ask_yesorno('', _("Do you want to set this printer (\"%s\")\nas the default printer?", $printer->{QUEUE}), 1))) { # Ask the user
-	$printer->{DEFAULT} = $printer->{QUEUE};
-        printer::set_default_printer($printer);
-    }
-}
-	
-sub print_testpages {
-    my ($printer, $in, $upNetwork) = @_;
-    $in->set_help('printTestPages') if $::isInstall;
-    # print test pages
-    my $standard = 1;
-    my $altletter = 0;
-    my $alta4 = 0;
-    my $photo = 0;
-    my $ascii = 0;
-    if ($in->ask_from_
-	({ title => _("Test pages"),
-	   messages => _("Please select the test pages you want to print.
-Note: the photo test page can take a rather long time to get printed
-and on laser printers with too low memory it can even not come out.
-In most cases it is enough to print the standard test page."),
-          cancel => ($printer->{configured}{$printer->{OLD_QUEUE}} ?
-		     _("Cancel") : _("No test pages")),
-          ok => _("Print")},
-	 [
-	  { text => _("Standard test page"), type => 'bool',
-	    val => \$standard },
-	  ($::expert ?
-	   { text => _("Alternative test page (Letter)"), type => 'bool', 
-	     val => \$altletter } : ()),
-	  ($::expert ?
-	   { text => _("Alternative test page (A4)"), type => 'bool', 
-	     val => \$alta4 } : ()), 
-	  { text => _("Photo test page"), type => 'bool', val => \$photo }
-	  #{ text => _("Plain text test page"), type => 'bool',
-	  #  val => \$ascii }
-	  ])) {
-	my @lpq_output;
-	{
-	    my $w = $in->wait_message('', _("Printing test page(s)..."));
-	    
-	    $upNetwork and do { &$upNetwork(); undef $upNetwork; sleep(1) };
-	    my $stdtestpage = "/usr/share/printer-testpages/testprint.ps";
-	    my $altlttestpage = "/usr/share/printer-testpages/testpage.ps";
-	    my $alta4testpage = "/usr/share/printer-testpages/testpage-a4.ps";
-	    my $phototestpage = "/usr/share/printer-testpages/photo-testpage.jpg";
-	    my $asciitestpage = "/usr/share/printer-testpages/testpage.asc";
-	    my @testpages;
-	    # Install the filter to convert the photo test page to PS
-	    if (($photo) && (!$::testing) &&
-		(!printer::files_exist((qw(/usr/bin/convert))))) {
-		$in->do_pkgs->install('ImageMagick');
-	    }
-	    # set up list of pages to print
-	    $standard && push (@testpages, $stdtestpage);
-	    $altletter && push (@testpages, $altlttestpage);
-	    $alta4 && push (@testpages, $alta4testpage);
-	    $photo && push (@testpages, $phototestpage);
-	    $ascii && push (@testpages, $asciitestpage);
-	    # print the stuff
-	    @lpq_output = printer::print_pages($printer, @testpages);
-	}
-	my $dialogtext;
-	if (@lpq_output) {
-	    $dialogtext = _("Test page(s) have been sent to the printer.
-It may take some time before the printer starts.
-Printing status:\n%s\n\n", @lpq_output);
-	} else {
-	    $dialogtext = _("Test page(s) have been sent to the printer.
-It may take some time before the printer starts.\n");
-	}
-	if ($printer->{NEW} == 0) {
-	    $in->ask_warn('',$dialogtext);
-	    return 1;
-	} else {
-	    $in->ask_yesorno('',$dialogtext . _("Did it work properly?"), 1) 
-		and return 1;
-	}
-    } else {
-	return 1;
-    }
-    return 0;
-}
-
-sub printer_help {
-    my ($printer, $in) = @_;
-    my $spooler = $printer->{SPOOLER};
-    my $queue = $printer->{QUEUE};
-    my $default = $printer->{DEFAULT};
-    my $raw = 0;
-    if (($printer->{configured}{$queue}{'queuedata'}{'model'} eq
-	 _("Unknown model")) ||
-	($printer->{configured}{$queue}{'queuedata'}{'model'} eq
-	 _("Raw printer"))) {
-	$raw = 1;
-    }
-    #my $foomatic = $printer->{configured}{$queue}{queuedata}{foomatic};
-    #my $ppd = $printer->{configured}{$queue}{queuedata}{ppd};
-    my $dialogtext;
-    if ($spooler eq "cups") {
-	$dialogtext =
-_("To print a file from the command line (terminal window) you can either use the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or \"qtcups <file>\". The graphical tools allow you to choose the printer and to modify the option settings easily.
-", ($queue ne $default ? "lpr -P $queue" : "lpr")) .
-_("These commands you can also use in the \"Printing command\" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.
-") .
-(!$raw ?
-_("
-The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -o option=setting -o switch" : "lpr -o option=setting -o switch")) .
-_("To get a list of the options available for the current printer read either the list shown below or click on the \"Print option list\" button.
-
-") . printer::lphelp_output($printer) : "");
-    } elsif ($spooler eq "lprng") {
-	$dialogtext =
-_("To print a file from the command line (terminal window) use the command \"%s <file>\".
-", ($queue ne $default ? "lpr -P $queue" : "lpr")) . 
-_("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
-") .
-(!$raw ?
-_("
-The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -Z option=setting -Z switch" : "lpr -Z option=setting -Z switch")) .
-_("To get a list of the options available for the current printer click on the \"Print option list\" button.
-
-") : "");
-    } elsif ($spooler eq "lpd") {
-	$dialogtext =
-_("To print a file from the command line (terminal window) use the command \"%s <file>\".
-", ($queue ne $default ? "lpr -P $queue" : "lpr")) .
-_("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
-") .
-(!$raw ?
-_("
-The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -o option=setting -o switch" : "lpr -o option=setting -o switch")) .
-_("To get a list of the options available for the current printer click on the \"Print option list\" button.
-
-") : "");
-    } elsif ($spooler eq "pdq") {
-	$dialogtext =
-_("To print a file from the command line (terminal window) use the command \"%s <file>\" or \"%s <file>\".
-", ($queue ne $default ? "pdq -P $queue" : "pdq"), ($queue ne $default ? "lpr -P $queue" : "lpr")) .
-_("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
-") .
-_("You can also use the graphical interface \"xpdq\" for setting options and handling printing jobs.
-If you are using KDE as desktop environment you have a \"panic button\", an icon on the desktop, labeled with \"STOP Printer!\", which stops all print jobs immediately when you click it. This is for example useful for paper jams.
-") .
-(!$raw ?
-_("
-The \"%s\" and \"%s\" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\".
-", "pdq", "lpr", ($queue ne $default ? "pdq -P $queue -aoption=setting -oswitch" : "pdq -aoption=setting -oswitch")) .
-_("To get a list of the options available for the current printer read either the list shown below or click on the \"Print option list\" button.
-
-") . printer::pdqhelp_output($printer) : "");
-    }
-    if (!$raw) {
-        my $choice;
-        while ($choice ne _("Close")) {
-	    $choice = $in->ask_from_list_
-	        (_("Printing on the printer \"%s\"", $queue),
-		 $dialogtext,
-		 [ _("Print option list"), _("Close") ],
-		 _("Close"));
-	    if ($choice ne _("Close")) {
-		my $w = $in->wait_message('', _("Printing test page(s)..."));
-	        printer::print_optionlist($printer);
-	    }
-	}
-    } else {
-	$in->ask_warn('',$dialogtext);
-    }
-}
-
-sub copy_queues_from {
-    my ($printer, $in, $oldspooler) = @_;
-
-    $in->set_help('copyQueues') if $::isInstall;
-    my $newspooler = $printer->{SPOOLER};
-    my @oldqueues;
-    my @queueentries;
-    my @queuesselected;
-    my $newspoolerstr;
-    my $oldspoolerstr;
-    my $noninteractive = 0;
-    {
-	my $w = $in->wait_message('', _("Reading printer data ..."));
-	@oldqueues = printer::get_copiable_queues($oldspooler, $newspooler);
-	@oldqueues = sort(@oldqueues);
-	$newspoolerstr = $printer::shortspooler_inv{$newspooler};
-	$oldspoolerstr = $printer::shortspooler_inv{$oldspooler};
-	for (@oldqueues) {
-	    push (@queuesselected, 1);
-	    push (@queueentries, { text => $_, type => 'bool', 
-				   val => \$queuesselected[$#queuesselected] });
-	}
-	# LPRng and LPD use the same config files, therefore one sees the 
-	# queues of LPD when one uses LPRng and vice versa, but these queues
-	# do not work. So automatically transfer all queues when switching
-	# between LPD and LPRng.
-	if (($oldspooler =~ /^lp/) && ($newspooler =~ /^lp/)) {
-	    $noninteractive = 1;
-	}
-    }
-    if ($noninteractive ||
-	$in->ask_from_
-	({ title => _("Transfer printer configuration"),
-	   messages => _("You can copy the printer configuration which you have done 
-for the spooler %s to %s, your current spooler. All the
-configuration data (printer name, description, location, 
-connection type, and default option settings) is overtaken,
-but jobs will not be transferred.
-Not all queues can be transferred due to the following 
-reasons:
-", $oldspoolerstr, $newspoolerstr) .
-($newspooler eq "cups" ? _("CUPS does not support printers on Novell servers or printers
-sending the data into a free-formed command.
-") :
- ($newspooler eq "pdq" ? _("PDQ only supports local printers, remote LPD printers, and
-Socket/TCP printers.
-") :
-  _("LPD and LPRng do not support IPP printers.
-"))) .
-_("In addition, queues not created with this program or
-\"foomatic-configure\" cannot be transferred.") .
-($oldspooler eq "cups" ? _("
-Also printers configured with the PPD files provided by
-their manufacturers or with native CUPS drivers can not be
-transferred.") : ()) . _("
-Mark the printers which you want to transfer and click 
-\"Transfer\"."),
-	   cancel => _("Do not transfer printers"),
-           ok => _("Transfer")
-	 },
-         \@queueentries
-      )) {
-	my $queuecopied = 0;
-	for (@oldqueues) {
-	    if (shift(@queuesselected)) {
-                my $oldqueue = $_;
-                my $newqueue = $_;
-                if ((!$printer->{configured}{$newqueue}) ||
-		    ($noninteractive) ||
-		    ($in->ask_from_
-	             ({ title => _("Transfer printer configuration"),
-	                messages => _("A printer named \"%s\" already exists under %s. 
-Click \"Transfer\" to overwrite it.
-You can also type a new name or skip this printer.", 
-				      $newqueue, $newspoolerstr),
-                        ok => _("Transfer"),
-                        cancel => _("Skip"),
-		        callbacks => { complete => sub {
-	                    unless ($newqueue =~ /^\w+$/) {
-				$in->ask_warn('', _("Name of printer should contain only letters, numbers and the underscore"));
-				return (1,0);
-			    }
-			    if (($printer->{configured}{$newqueue})
-				&& ($newqueue ne $oldqueue) && 
-				(!$in->ask_yesorno('', _("The printer \"%s\" already exists,\ndo you really want to overwrite its configuration?",
-							 $newqueue),
-						   0))) {
-				return (1,0); # Let the user correct the name
-			    }
-			    return 0;
-			}}
-		    },
-		      [{label => _("New printer name"),val => \$newqueue}]))) {
-		    {
-			my $w = $in->wait_message('', 
-			   _("Transferring %s ...", $oldqueue));
-		        printer::copy_foomatic_queue($printer, $oldqueue,
-						   $oldspooler, $newqueue) and
-							 $queuecopied = 1;
-		    }
-		    if ($oldqueue eq $printer->{DEFAULT}) {
-			# Make the former default printer the new default
-			# printer if the user does not reject
-			if (($noninteractive) ||
-			    ($in->ask_yesorno
-			     (_("Transfer printer configuration"),
-			      _("You have transferred your former default printer (\"%s\"),
-Should it be also the default printer under the
-new printing system %s?", $oldqueue, $newspoolerstr), 1))) {
-			    $printer->{DEFAULT} = $newqueue;
-			    printer::set_default_printer($printer);
-			}
-		    }
-		}
-            }
-	}
-        if ($queuecopied) {
-	    my $w = $in->wait_message('', _("Refreshing printer data ..."));
-	    printer::read_configured_queues($printer);
-        }
-    }
-}
-
-sub start_network {
-    my $in = $_[0];
-    my $w = $in->wait_message(_("Configuration of a remote printer"), 
-			      _("Starting network ..."));
-    return printer::start_service("network");
-}
-
-sub check_network {
-
-    # This routine is called whenever the user tries to configure a remote
-    # printer. It checks the state of the network functionality to assure
-    # that the network is up and running so that the remote printer is
-    # reachable.
-
-    my ($printer, $in) = @_;
-
-    $in->set_help('checkNetwork') if $::isInstall;
-
-    # First check: Does /etc/sysconfig/network-scripts/draknet_conf exist
-    # (otherwise the network is not configured yet and draknet has to be
-    # started)
-
-    if (!printer::files_exist("/etc/sysconfig/network-scripts/draknet_conf")) {
-	my $go_on = 0;
-	while (!$go_on) {
-	    my $choice = _("Configure the network now");
-	    if ($in->ask_from(_("Network functionality not configured"),
-			      _("You are going to configure a remote printer. This needs working
-network access, but your network is not configured yet. If you
-go on without network configuration, you will not be able to use
-the printer which you are configuring now. How do you want 
-to proceed?"),
-			      [ { val => \$choice, type => 'list',
-				  list => [ _("Configure the network now"),
-					    _("Go on without configuring the network") ]} ] )) {
-		if ($choice eq _("Configure the network now")){
-		    if ($::isInstall) {
-			require network::netconnect;
-		        network::netconnect::main
-			    ($in->{prefix}, $in->{netcnx} ||= {}, 
-			     $in->{netc}, $in->{mouse}, $in, 
-			     $in->{intf}, 0,
-			     $in->{lang} eq "fr_FR" && 
-			     $in->{keyboard} eq "fr", 0);
-		    } else {
-			system("/usr/sbin/draknet");
-		    }
-		    if (printer::files_exist("/etc/sysconfig/network-scripts/draknet_conf")) {
-			$go_on = 1;
-		    }
-		} else {
-		    return 1;
-		}
-	    } else {
-		return 0;
-	    }
-	}
-    }
-
-    # Second check: Is the network running?
-
-    if (printer::network_running()) {return 1;}
-
-    # The network is configured now, start it.
-    if (!start_network($in)) {
-	$in->ask_warn(_("Configuration of a remote printer"), 
-($::isInstall ?
-_("The network configuration done during the installation 
-cannot be started now. Please check whether the network
-gets accessable after booting your system and correct the
-configuration using the Mandrake Control Center, section
-\"Network & Internet\"/\"Connection\", and afterwards set
-up the printer, also using the Mandrake Control Center,
-section \"Hardware\"/\"Printer\"") :
-_("The network access was not running and could not be 
-started. Please check your configuration and your 
-hardware. Then try to configure your remote printer
-again.")));
-	return 0;
-    }
-
-    # Give a SIGHUP to the daemon and in case of CUPS do also the
-    # automatic configuration of broadcasting/access permissions
-    # The daemon is not really restarted but only SIGHUPped to not
-    # interrupt print jobs.
-
-    my $w = $in->wait_message(_("Configuration of a remote printer"), 
-			      _("Restarting printing system ..."));
-    return printer::SIGHUP_daemon($printer->{SPOOLER});
-
-}
-
-sub security_check {
-    # Check the security mode and when in "high" or "paranoid" mode ask the
-    # user whether he really wants to configure printing.
-    my ($printer, $in, $spooler) = @_;
-    $in->set_help('securityCheck') if $::isInstall;
-
-    # Get security level
-    my $security = undef;
-    if ($::isInstall) {
-	$security = $in->{'security'};
-    } else {
-	$security = printer::get_security_level();
-    }
-
-    # Exit silently if the spooler is PDQ
-    if ($spooler eq "pdq") {return 1;}
-
-    # Exit silently in medium or lower security levels
-    if ((!$security) || ($security < 4)) {return 1;}
-    
-    # Exit silently if the current spooler is already activated for the current
-    # security level
-    if (printer::spooler_in_security_level($spooler, $security)) {return 1;}
-
-    # Tell user in which security mode he is and ask him whether he really
-    # wants to activate the spooler in the given security mode. Stop the
-    # operation of installing the spooler if he disagrees.
-    my $securitystr = ($security == 4 ? _("high") : _("paranoid"));
-    if ($in->ask_yesorno(_("Installing a printing system in the %s security level", $securitystr),
-			 _("You are about to install the printing system %s on
-a system running in the %s security level.
-
-This printing system runs a daemon (background process)
-which waits for print jobs and handles them. This daemon
-is also accessable by remote machines through the network
-and so it is a possible point for attacks. Therefore only
-a few selected daemons are started by default in this
-security level.
-
-Do you really want to configure printing on this
-machine?",
-			   $printer::shortspooler_inv{$spooler},
-			   $securitystr))) {
-        printer::add_spooler_to_security_level($spooler, $security);
-	my $service;
-	if (($spooler eq "lpr") || ($spooler eq "lprng")) {
-	    $service = "lpd";
-	} else {
-	    $service = $spooler;
-	}
-        printer::start_service_on_boot($service);
-	return 1;
-    } else {
-	return 0;
-    }
-}
-
-sub start_spooler_on_boot {
-    # Checks whether the spooler will be started at boot time and if not,
-    # ask the user whether he wants to start the spooler at boot time.
-    my ($printer, $in, $service) = @_;
-    $in->set_help('startSpoolerOnBoot') if $::isInstall;
-    if (!printer::service_starts_on_boot($service)) {
-	if ($in->ask_yesorno(_("Starting the printing system at boot time"),
-			     _("The printing system (%s) will not be started automatically
-when the machine is booted.
-
-It is possible that the automatic starting was turned off 
-by changing to a higher security level, because the printing
-system is a potential point for attacks.
-
-Do you want to have the automatic starting of the printing
-system turned on again?",
-		       $printer::shortspooler_inv{$printer->{SPOOLER}}))) {
-	    printer::start_service_on_boot($service);
-	}
-    }
-    1;
-}
-
-sub install_spooler {
-    # installs the default spooler and start its daemon
-    my ($printer, $in) = @_;
-    if (!$::testing) {
-	# If the user refuses to install the spooler in high or paranoid
-	# security level, exit.
-	if (!security_check($printer, $in, $printer->{SPOOLER})) {
-	    return 0;
-	}
-	if ($printer->{SPOOLER} eq "cups") {
-	    {
-		my $w = $in->wait_message('', _("Checking installed software..."));
-		if ((!$::testing) &&
-		    (!printer::files_exist((qw(/usr/lib/cups/cgi-bin/printers.cgi
-					       /sbin/ifconfig
-					       /usr/bin/xpp
-					       /usr/bin/qtcups),
-					    (printer::files_exist("/usr/bin/kwin")?
-					     "/usr/bin/kups" : ()),
-					    ($::expert ? 
-					     "/usr/share/cups/model/postscript.ppd.gz" : ())
-					    )))) {
-		    $in->do_pkgs->install(('cups', 'net-tools', 'xpp', 'qtcups', 
-					   if_($in->do_pkgs->is_installed('kdebase'), 'kups'),
-					   ($::expert ? 'cups-drivers' : ())));
-		}
-		# Start daemon
-	        printer::start_service("cups");
-		# Set the CUPS tools as defaults for "lpr", "lpq", "lprm", ...
-	        printer::set_alternative("lpr","/usr/bin/lpr-cups");
-	        printer::set_alternative("lpq","/usr/bin/lpq-cups");
-	        printer::set_alternative("lprm","/usr/bin/lprm-cups");
-	        printer::set_alternative("lp","/usr/bin/lp-cups");
-	        printer::set_alternative("cancel","/usr/bin/cancel-cups");
-	        printer::set_alternative("lpstat","/usr/bin/lpstat-cups");
-	        printer::set_alternative("lpc","/usr/sbin/lpc-cups");
-		# Remove PDQ panic buttons from the user's KDE Desktops
-	        printer::pdq_panic_button("remove");
-	    }
-	    # Should it be started at boot time?
-	    start_spooler_on_boot($printer, $in, "cups");
-	} elsif ($printer->{SPOOLER} eq "lpd") {
-	    {
-		my $w = $in->wait_message('', _("Checking installed software..."));
-		# "lpr" conflicts with "LPRng", remove "LPRng"
-		if ((!$::testing) &&
-		    (printer::files_exist((qw(/usr/lib/filters/lpf))))) {
-		    my $w = $in->wait_message('', _("Removing LPRng..."));
-		    $in->do_pkgs->remove_nodeps('LPRng');
-		}
-		if ((!$::testing) &&
-		    (!printer::files_exist((qw(/usr/sbin/lpf
-					       /usr/sbin/lpd
-					       /sbin/ifconfig))))) {
-		    $in->do_pkgs->install(('lpr', 'net-tools'));
-		}
-		# Start daemon
-	        printer::restart_service("lpd");
-		# Set the LPD tools as defaults for "lpr", "lpq", "lprm", ...
-	        printer::set_alternative("lpr","/usr/bin/lpr-lpd");
-	        printer::set_alternative("lpq","/usr/bin/lpq-lpd");
-	        printer::set_alternative("lprm","/usr/bin/lprm-lpd");
-	        printer::set_alternative("lpc","/usr/sbin/lpc-lpd");
-		# Remove PDQ panic buttons from the user's KDE Desktops
-	        printer::pdq_panic_button("remove");
-	    }
-	    # Should it be started at boot time?
-	    start_spooler_on_boot($printer, $in, "lpd");
-	} elsif ($printer->{SPOOLER} eq "lprng") {
-	    {
-		my $w = $in->wait_message('', _("Checking installed software..."));
-		# "LPRng" conflicts with "lpr", remove "lpr"
-		if ((!$::testing) &&
-		    (printer::files_exist((qw(/usr/sbin/lpf))))) {
-		    my $w = $in->wait_message('', _("Removing LPD..."));
-		    $in->do_pkgs->remove_nodeps('lpr');
-		}
-		if ((!$::testing) &&
-		    (!printer::files_exist((qw(/usr/lib/filters/lpf
-					       /usr/sbin/lpd
-					       /sbin/ifconfig))))) {
-		    $in->do_pkgs->install('LPRng', 'net-tools');
-		}
-		# Start daemon
-	        printer::restart_service("lpd");
-		# Set the LPRng tools as defaults for "lpr", "lpq", "lprm", ...
-	        printer::set_alternative("lpr","/usr/bin/lpr-lpd");
-	        printer::set_alternative("lpq","/usr/bin/lpq-lpd");
-	        printer::set_alternative("lprm","/usr/bin/lprm-lpd");
-	        printer::set_alternative("lp","/usr/bin/lp-lpd");
-	        printer::set_alternative("cancel","/usr/bin/cancel-lpd");
-	        printer::set_alternative("lpstat","/usr/bin/lpstat-lpd");
-	        printer::set_alternative("lpc","/usr/sbin/lpc-lpd");
-		# Remove PDQ panic buttons from the user's KDE Desktops
-	        printer::pdq_panic_button("remove");
-	    }
-	    # Should it be started at boot time?
-	    start_spooler_on_boot($printer, $in, "lpd");
-	} elsif ($printer->{SPOOLER} eq "pdq") {
-	    {
-		my $w = $in->wait_message('', _("Checking installed software..."));
-		if ((!$::testing) &&
-		    (!printer::files_exist((qw(/usr/bin/pdq
-					       /usr/X11R6/bin/xpdq))))) {
-		    $in->do_pkgs->install('pdq');
-		}
-		# PDQ has no daemon, so nothing needs to be started
-		
-		# Set the PDQ tools as defaults for "lpr", "lpq", "lprm", ...
-	        printer::set_alternative("lpr","/usr/bin/lpr-pdq");
-	        printer::set_alternative("lpq","/usr/bin/lpq-foomatic");
-	        printer::set_alternative("lprm","/usr/bin/lprm-foomatic");
-		# Add PDQ panic buttons to the user's KDE Desktops
-	        printer::pdq_panic_button("add");
-	    }
-	}
-	# Give a SIGHUP to the devfsd daemon to correct the permissions
-	# for the /dev/... files according to the spooler
-	printer::SIGHUP_daemon("devfs");
-    }
-    1;
-}
-
-sub setup_default_spooler {
-    my ($printer, $in) = @_;
-    $in->set_help('setupDefaultSpooler') if $::isInstall;
-    $printer->{SPOOLER} ||= 'cups';
-    my $oldspooler = $printer->{SPOOLER};
-    my $str_spooler = 
-	$in->ask_from_list_(_("Select Printer Spooler"),
-			    _("Which printing system (spooler) do you want to use?"),
-			    [ printer::spooler() ],
-			    $printer::spooler_inv{$printer->{SPOOLER}},
-			    ) or return;
-    $printer->{SPOOLER} = $printer::spooler{$str_spooler};
-    # Install the spooler if not done yet
-    if (!install_spooler($printer, $in)) {
-	$printer->{SPOOLER} = $oldspooler;
-	return;
-    }
-    if ($printer->{SPOOLER} ne $oldspooler) {
-	# Get the queues of this spooler
-	{
-	    my $w = $in->wait_message('', _("Reading printer data ..."));
-	    printer::read_configured_queues($printer);
-	}
-	# Copy queues from former spooler
-	copy_queues_from($printer, $in, $oldspooler);
-	# Re-read the printer database (CUPS has additional drivers, PDQ
-	# has no raw queue)
-	%printer::thedb = ();
-	#my $w = $in->wait_message('', _("Reading printer database ..."));
-	#printer::read_printer_db($printer->{SPOOLER});
-    }
-    # Save spooler choice
-    printer::set_default_spooler($printer);
-    return $printer->{SPOOLER};
-}
-
-sub configure_queue {
-    my ($printer, $in) = @_;
-    my $w = $in->wait_message('', _("Configuring printer \"%s\" ...",
-				    $printer->{currentqueue}{queue}));
-    $printer->{complete} = 1;
-    printer::configure_queue($printer);
-    $printer->{complete} = 0;
-}
-
-#- Program entry point for configuration of the printing system.
-sub main {
-    my ($printer, $in, $ask_multiple_printer, $upNetwork) = @_;
-
-    # Default printer name, we do not use "lp" so that one can switch the
-    # default printer under LPD without needing to rename another printer.
-    # Under LPD the alias "lp" will be given to the default printer.
-    my $defaultprname = _("Printer");
-
-    # printerdrake does not work without foomatic, and for more convenience
-    # we install some more stuff
-    {
-	my $w = $in->wait_message('', _("Checking installed software..."));
-	if ((!$::testing) &&
-	    (!printer::files_exist((qw(/usr/bin/foomatic-configure
-				       /usr/lib/perl5/site_perl/5.6.1/Foomatic/DB.pm
-				       /usr/bin/escputil
-				       /usr/share/printer-testpages/testprint.ps
-				       ),
-				    (printer::files_exist("/usr/bin/gimp") ?
-				     "/usr/lib/gimp/1.2/plug-ins/print" : ())
-				    )))) {
-	    $in->do_pkgs->install('foomatic','printer-utils','printer-testpages',
-				  if_($in->do_pkgs->is_installed('gimp'), 'gimpprint'));
-	}
-
-	# only experts should be asked for the spooler
-	!$::expert and $printer->{SPOOLER} ||= 'cups';
-
-    }
-
-    # If we have chosen a spooler, install it and mark it as default spooler
-    if (($printer->{SPOOLER}) && ($printer->{SPOOLER} ne '')) {
-	if (!install_spooler($printer, $in)) {return;}
-        printer::set_default_spooler($printer);
-    }
-
-    # Control variables for the main loop
-    my ($queue, $continue, $newqueue, $editqueue, $expertswitch, $menushown) = ('', 1, 0, 0, 0, 0);
-    # Cursor position in queue modification window
-    my $modify = _("Printer options");
-    while ($continue) {
-	$newqueue = 0;
-	# When the queue list is not shown, cancelling the printer type
-	# dialog should leave the program
-	$continue = 0;
-	# Get the default printer
-	if (defined($printer->{SPOOLER}) && ($printer->{SPOOLER} ne '') &&
-	    ((!defined($printer->{DEFAULT})) || ($printer->{DEFAULT} eq ''))) {
-	    my $w = $in->wait_message('', _("Preparing PrinterDrake ..."));
-	    $printer->{DEFAULT} = printer::get_default_printer($printer);
-	    if ($printer->{DEFAULT}) {
-		# If a CUPS system has only remote printers and no default
-		# printer defined, it defines the first printer whose
-		# broadcast signal appeared after the start of the CUPS
-		# daemon, so on every start another printer gets the default
-		# printer. To avoid this, make sure that the default printer
-		# is defined.
-		printer::set_default_printer($printer);
-	    } else {
-		$printer->{DEFAULT} = '';
-	    }
-	}
-	if ($editqueue) {
-	    # The user was either in the printer modification dialog and did
-	    # not close it or he had set up a new queue and said that the test
-	    # page didn't come out correctly, so let the user edit the queue.
-	    $newqueue = 0;
-	    $continue = 1;
-	    $editqueue = 0;
-	} else {
-	    # Reset modification window cursor when one leaves the window
-	    $modify = _("Printer options");
-	    if (!$ask_multiple_printer && 
-		%{$printer->{configured} || {}} == ()) {
-		$in->set_help('doYouWantToPrint') if $::isInstall;
-		$newqueue = 1;
-		$queue = $printer->{want} || 
-		    $in->ask_yesorno(_("Printer"),
-				    _("Would you like to configure printing?"),
-				    0) ? $defaultprname : _("Done");
-		if ($queue ne _("Done")) {
-		    $printer->{SPOOLER} ||= 
-			setup_default_spooler ($printer, $in) ||
-			    return;
-		}
-	    } else {
-		# Ask for a spooler when none is defined
-		$printer->{SPOOLER} ||=  setup_default_spooler ($printer, $in) || return;
-		# This entry and the check for this entry have to use
-		# the same translation to work properly
-		my $spoolerentry = _("Printing system: ");
-		# Show a queue list window when there is at least one queue,
-		# when we are in expert mode, or when we are not in the
-		# installation.
-		unless ((%{$printer->{configured} || {}} == ()) && 
-			(!$::expert) && ($::isInstall)) {
-		    $in->set_help('mainMenu') if $::isInstall;
-		    # Cancelling the printer type dialog should leed to this
-		    # dialog
-		    $continue = 1;
-		    # This is for the "Recommended" installation. When one has
-		    # no printer queue printerdrake starts directly adding
-		    # a printer and in the end it asks whether one wants to
-		    # install another printer. If the user says "Yes", he
-		    # arrives in the main menu of printerdrake. From now
-		    # on the question is not asked any more but the menu
-		    # is shown directly after having done an operation.
-		    $menushown = 1;
-		    # $expertwitch gets one when the "Expert mode"/
-		    # "Standard mode" button is clicked.
-		    $expertswitch = !$in->ask_from_(
-			{messages =>
-			     _("The following printers are configured.
-Click on one of them to modify it or
-to get information about it or on 
-\"Add Printer\" to add a new printer."),
-			 cancel => ($::isInstall ? 
-				    ('') : ($::expert ? 
-				  _("Normal Mode") : _("Expert Mode"))),
-			},
-			# List the queues
-			[ { val => \$queue, format => \&translate,
-			    sort => 0, 
-		        list => [ (sort(map {"$_" . ($_ eq $printer->{DEFAULT} ?
-						     _(" (Default)") : ())}
-				   keys(%{$printer->{configured} || {}}))),
-			# CUPS makes available remote printers automatically
-			($printer->{SPOOLER} eq "cups" ?
-			 ($::expert ? _("Printer(s) on remote CUPS server(s)"):
-			  _("Printer(s) on remote server(s)")) : ()),
-			# Button to add a new queue
-			_("Add printer"),
-		        # In expert mode we can change the spooler
-		        ($::expert ?
-		         ( $spoolerentry .
-		           $printer::spooler_inv{$printer->{SPOOLER}} ) : ()),
-		        # Bored by configuring your printers, get out of here!
-		        _("Done") ] } ]
-		    );
-		    # Toggle expert mode and standard mode
-		    if ($expertswitch) {
-			$expertswitch = 0;
-			$::expert = !$::expert;
-			# Read printer database for the new user mode
-			%printer::thedb = ();
-			#my $w = $in->wait_message('', _("Reading printer database ..."));
-		        #printer::read_printer_db($printer->{SPOOLER});
-			next;
-		    }
-		} else {
-		    #- as there are no printer already configured, Add one
-		    #- automatically.
-		    $queue = _("Add printer"); 
-		} 
-	        # Determine a default name for a new printer queue
-		if ($queue eq _("Add printer")) {
-		    $newqueue = 1;
-		    my %queues; 
-		    @queues{map { split '\|', $_ } keys %{$printer->{configured}}} = ();
-		    my $i = ''; while ($i < 100) { last unless exists $queues{"$defaultprname$i"}; ++$i; }
-		    $queue = "$defaultprname$i";
-		}
-		# Function to switch to another spooler chosen
-		if ($queue =~ /^$spoolerentry/) {
-		    $printer->{SPOOLER} = setup_default_spooler ($printer, $in) || $printer->{SPOOLER};
-		    next;
-		}
-		# Make available printers on remote CUPS servers (CUPS only).
-		if (($queue eq _("Printer(s) on remote CUPS server(s)")) ||
-		    ($queue eq _("Printer(s) on remote server(s)"))) {
-		    setup_remote_cups_server($printer, $in);
-		    next;
-		}
-		# Rip off the " (Default)" tag from the queue name
-		if ($queue =~ /^\s*(\S+)\s+/) {
-		    $queue = $1;
-		}
-	    }
-	    # Save the default spooler
-	    printer::set_default_spooler($printer);
-	    #- Close printerdrake
-	    $queue eq _("Done") and last;
-	}
-	if ($newqueue) {
-	    $printer->{NEW} = 1;
-	    #- Set default values for a new queue
-	    $printer::printer_type_inv{$printer->{TYPE}} or 
-		$printer->{TYPE} = printer::default_printer_type($printer);
-	    $printer->{currentqueue} = { queue    => $queue,
-					 foomatic => 0,
-					 desc     => "",
-					 loc      => "",
-					 make     => "",
-					 model    => "",
-					 printer  => "",
-					 driver   => "",
-					 connect  => "",
-					 spooler  => $printer->{SPOOLER},
-				       };
-	    #- Set OLD_QUEUE field so that the subroutines for the
-	    #- configuration work correctly.
-	    $printer->{OLD_QUEUE} = $printer->{QUEUE} = $queue;
-	    #- When we are back on the main menu the cursor should be
-	    #- on "Add printer"
-	    $queue = _("Add printer");
-	    #- Do all the configuration steps for a new queue
-	    choose_printer_type($printer, $in) or next;
-	    if ($printer->{TYPE} eq 'CUPS') {
-		setup_remote_cups_server($printer, $in);
-		$continue = ($::expert || !$::isInstall || $menushown ||
-			     $in->ask_yesorno('',_("Do you want to configure another printer?")));
-		next;
-	    }
-	    #- Cancelling one of the following dialogs should restart 
-	    #- printerdrake
-	    $continue = 1;
-	    setup_printer_connection($printer, $in) or next;
-	    choose_printer_name($printer, $in) or next;
-	    get_db_entry($printer, $in);
-	    choose_model($printer, $in) or next;
-	    get_printer_info($printer, $in) or next;
-	    setup_options($printer, $in) or next;
-	    configure_queue($printer, $in);
-	    setasdefault($printer, $in);
-	    if (print_testpages($printer, $in, $printer->{TYPE} !~ /LOCAL/ && $upNetwork)) { 
-		$continue = ($::expert || !$::isInstall || $menushown ||
-			 $in->ask_yesorno('',_("Do you want to configure another printer?")));
-	    } else {
-		$editqueue = 1;
-		$queue = $printer->{QUEUE};
-	    }
-	} else {
-	    $printer->{NEW} = 0;
-	    # Modify a queue, ask which part should be modified
-	    $in->set_help('modifyPrinterMenu') if $::isInstall;
-	    if ($in->ask_from_
-		   ({ title => _("Modify printer configuration"),
-		      messages => _("Printer %s: %s %s
-What do you want to modify on this printer?",
-				    $queue,
-				    $printer->{configured}{$queue}{'queuedata'}{'make'},
-				    $printer->{configured}{$queue}{'queuedata'}{'model'} .
-				    ($queue eq $printer->{DEFAULT} ?
-				     _(" (Default)") : ())),
-		     cancel => _("Close"),
-		     ok => _("Do it!")
-		     },
-		    [ { val => \$modify, format => \&translate,
-			list => [ _("Printer connection type"),
-				  _("Printer name, description, location"),
-				  ($::expert ?
-				   _("Printer manufacturer, model, driver") :
-				   _("Printer manufacturer, model")),
-				  (($printer->{configured}{$queue}{'queuedata'}{'make'} ne
-				    "") &&
-				   (($printer->{configured}{$queue}{'queuedata'}{'model'} ne
-				    _("Unknown model")) &&
-				    ($printer->{configured}{$queue}{'queuedata'}{'model'} ne
-				    _("Raw printer"))) ?
-				   _("Printer options") : ()),
-				  (($queue ne $printer->{DEFAULT}) ?
-				   _("Set this printer as the default") : ()),
-				  _("Print test pages"),
-				  _("Know how to print with this printer"),
-				  _("Remove printer") ] } ] ) ) {
-		# Stay in the queue edit window until the user clicks "Close"
-		# or deletes the queue
-		$editqueue = 1; 
-		#- Copy the queue data and work on the copy
-		$printer->{currentqueue} = {};
-		if ($printer->{configured}{$queue}) {
-		    printer::copy_printer_params($printer->{configured}{$queue}{'queuedata'}, $printer->{currentqueue});
-		}
-		#- Keep in mind the printer driver which was used, so it can
-		#- be determined whether the driver is only available in expert
-		#- and so for setting the options for the driver in
-		#- recommended mode a special treatment has to be applied.
-		my $driver = $printer->{currentqueue}{driver};
-		#- keep in mind old name of queue (in case of changing)
-		$printer->{OLD_QUEUE} = $printer->{QUEUE} = $queue;
-		#- Reset some variables
-		$printer->{OLD_CHOICE} = undef;
-		$printer->{DBENTRY} = undef;
-		#- Which printer type did we have before (check beginning of 
-		#- URI)
-		my $type;
-		for $type (qw(file lpd socket smb ncp postpipe)) {
-		    if ($printer->{currentqueue}{'connect'}
-			=~ /^$type:/) {
-			$printer->{TYPE} = 
-			    ($type eq 'file' ? 'LOCAL' : uc($type));
-			last;
-		    }
-		}
-		# Do the chosen task
-		if ($modify eq _("Printer connection type")) {
-		    choose_printer_type($printer, $in) &&
-			setup_printer_connection($printer, $in) &&
-		            configure_queue($printer, $in);
-		} elsif ($modify eq _("Printer name, description, location")) {
-		    choose_printer_name($printer, $in) &&
-			configure_queue($printer, $in);
-		    # Delete old queue when it was renamed
-		    if (lc($printer->{QUEUE}) ne lc($printer->{OLD_QUEUE})) {
-			my $w = $in->wait_message('', _("Removing old printer \"%s\" ...", $printer->{OLD_QUEUE}));
-		        printer::remove_queue($printer, $printer->{OLD_QUEUE});
-			# If the default printer was renamed, correct the
-			# the default printer setting of the spooler
-			if ($queue eq $printer->{DEFAULT}) {
-			    $printer->{DEFAULT} = $printer->{QUEUE};
-			    printer::set_default_printer($printer);
-			}
-			$queue = $printer->{QUEUE};
-		    }
-		} elsif (($modify eq _("Printer manufacturer, model, driver")) ||
-			 ($modify eq _("Printer manufacturer, model"))) {
-		    get_db_entry($printer, $in);
-		    choose_model($printer, $in) &&
-			get_printer_info($printer, $in) &&
-			    setup_options($printer, $in) &&
-				configure_queue($printer, $in);
-		} elsif ($modify eq _("Printer options")) {
-		    get_printer_info($printer, $in) &&
-			setup_options($printer, $in) &&
-			    configure_queue($printer, $in);
-		} elsif ($modify eq _("Set this printer as the default")) {
-		    $printer->{DEFAULT} = $queue;
-		    printer::set_default_printer($printer);
-		    $in->ask_warn(_("Default printer"),
-				  _("The printer \"%s\" is set as the default printer now.", $queue));
-		} elsif ($modify eq _("Print test pages")) {
-		    print_testpages($printer, $in, $upNetwork);
-		} elsif ($modify eq _("Know how to print with this printer")) {
-		    printer_help($printer, $in);
-		} elsif ($modify eq _("Remove printer")) {
-		    if ($in->ask_yesorno('',
-           _("Do you really want to remove the printer \"%s\"?", $queue), 1)) {
-			{
-			    my $w = $in->wait_message('', _("Removing printer \"%s\" ...", $queue));
-			    if (printer::remove_queue($printer, $queue)) { 
-				$editqueue = 0;
-				# Define a new default printer if we have
-				# removed the default one
-				if ($queue eq $printer->{DEFAULT}) {
-				    my @k = sort(keys(%{$printer->{configured}}));
-				    if (@k) {
-					$printer->{DEFAULT} = $k[0];
-				        printer::set_default_printer($printer);
-				    } else {
-					$printer->{DEFAULT} = "";
-				    }
-				}
-			    }
-			}
-		    }		
-		}
-	    } else {
-		$editqueue = 0;
-	    }
-	    $continue = ($editqueue || $::expert || !$::isInstall || 
-			 $menushown ||
-			 $in->ask_yesorno('',_("Do you want to configure another printer?")));
-	}
-	# Delete some variables
-	$printer->{OLD_QUEUE} = "";
-	$printer->{QUEUE} = "";
-	$printer->{TYPE} = "";
-	$printer->{str_type} = "";
-	$printer->{currentqueue} = {};
-	$printer->{DBENTRY} = "";
-	$printer->{ARGS} = "";
-	$printer->{complete} = 0;
-	$printer->{OLD_CHOICE} = "";
-    }
-    # Clean up the $printer data structure for auto-install log
-    for my $queue (keys %{$printer->{configured}}) {
-	for my $item (keys %{$printer->{configured}{$queue}}) {
-	    if ($item ne "queuedata") {
-		delete($printer->{configured}{$queue}{$item});
-	    }
-	}
-    }
-    delete($printer->{OLD_QUEUE});
-    delete($printer->{QUEUE});
-    delete($printer->{TYPE});
-    delete($printer->{str_type});
-    delete($printer->{currentqueue});
-    delete($printer->{DBENTRY});
-    delete($printer->{ARGS});
-    delete($printer->{complete});
-    delete($printer->{OLD_CHOICE});
-    delete($printer->{NEW});
-    #use Data::Dumper;
-    #print "###############################################################################\n", Dumper($printer); 
-
-}
-
diff --git a/perl-install/proxy.pm b/perl-install/proxy.pm
deleted file mode 100644
index 72fd35664..000000000
--- a/perl-install/proxy.pm
+++ /dev/null
@@ -1,110 +0,0 @@
-package proxy;
-
-use diagnostics;
-use strict;
-use run_program;
-use common;
-use log;
-use c;
-
-
-sub main {
-    my ($prefix, $in) = @_;
-    my $proxy_cfg = {};
-    my $config_file = "$prefix/usr/lib/wgetrc";
-
-    # grab current config
-    foreach (cat_($config_file)) {
-      /http_proxy = (http:.*):(\d+)/ and ($proxy_cfg->{http_url}, $proxy_cfg->{http_port}) = ($1, $2);
-      /ftp_proxy = (ftp:.*):(\d+)/ and ($proxy_cfg->{ftp_url}, $proxy_cfg->{ftp_port}) = ($1, $2);
-      /http_user = (.*)/ and ($proxy_cfg->{login}) = $1;
-      if (/http_passwd = (.*)/) {
-        ($proxy_cfg->{passwd}) = $1;
-        ($proxy_cfg->{passwd2}) = $1;
-      }
-    }
-  begin:
-    $::isWizard = 1;
-    $::Wizard_no_previous = 1;
-    $in->ask_okcancel(_("Proxy configuration"),
-                      _("Welcome to the proxy configuration utility.\n\nHere, you'll be able to set up your http and ftp proxies\nwith or without login and password\n"
-                       ), 1);
-
-    # http proxy
-  step_http_proxy:
-    undef $::Wizard_no_previous;
-    $proxy_cfg->{http_url} ||= "http://www.proxy.com/";
-    $in->ask_from(_("Proxy configuration"),
-		  _("Please fill in the http proxy informations\nLeave it blank if you don't want an http proxy"),
-		  [ { label => _("URL"), val => \$proxy_cfg->{http_url} },
-		    { label => _("port"), val => \$proxy_cfg->{http_port} }
-		  ],
-		  complete => sub {
-		      if ($proxy_cfg->{http_url} && $proxy_cfg->{http_url} !~ /^http:/) {
-			  $in->ask_warn('', _("Url should begin with 'http:'"));
-			  return (1,0);
-		      }
-		      if ($proxy_cfg->{http_port} && $proxy_cfg->{http_port} !~ /^\d+$/) {
-			  $in->ask_warn('', _("The port part should be numeric"));
-			  return (1,1);
-		      }
-		      0;
-		  }
-		 ) or goto begin;
-
-    # ftp proxy
-    step_ftp_proxy:
-    $proxy_cfg->{ftp_url} ||= "ftp://ftp.proxy.com/";
-    $in->ask_from(_("Proxy configuration"),
-		  _("Please fill in the ftp proxy informations\nLeave it blank if you don't want an ftp proxy"),
-		  [ { label => _("URL"), val => \$proxy_cfg->{ftp_url} },
-		    { label => _("port"), val => \$proxy_cfg->{ftp_port} }
-		  ],
-		  complete => sub {
-		      if ($proxy_cfg->{ftp_url} && $proxy_cfg->{ftp_url} !~ /^ftp:/) {
-			  $in->ask_warn('', _("Url should begin with 'ftp:'"));
-			  return (1,0);
-		      }
-		      if ($proxy_cfg->{ftp_port} && $proxy_cfg->{ftp_port} !~ /^\d+$/) {
-			  $in->ask_warn('', _("The port part should be numeric"));
-			  return (1,1);
-		      }
-		      0;
-		  }
-		 ) or goto step_http_proxy;
-
-    # proxy login/passwd
-    step_login:
-    $in->ask_from(_("Proxy configuration"),
-		  _("Please enter proxy login and password, if any.\nLeave it blank if you don't want login/passwd"),
-		  [ { label => _("login"), val => \$proxy_cfg->{login} },
-		    {
-		     label => _("password"), val => \$proxy_cfg->{passwd}, hidden => 1 },
-		    {
-		     label => _("re-type password"), val => \$proxy_cfg->{passwd2}, hidden => 1 }
-		  ],
-		  complete => sub {
-		      if ($proxy_cfg->{passwd} ne $proxy_cfg->{passwd2}) {
-			  $in->ask_warn('', _("The passwords don't match. Try again!"));
-			  return(1,1);
-		      }
-		      0;
-		  }
-		 ) or goto step_ftp_proxy;
-    # save config
-    substInFile {
-        s/^(http|ftp)_proxy.*\n//;
-        eof and $_ .= "http_proxy = $proxy_cfg->{http_url}:$proxy_cfg->{http_port}
-ftp_proxy = $proxy_cfg->{ftp_url}:$proxy_cfg->{ftp_port}\n";
-    } $config_file;
-    $proxy_cfg->{login} and substInFile {
-        s/^http_(user|passwd).*\n//;
-        eof and $_ .= "http_user = $proxy_cfg->{login}
-http_passwd = $proxy_cfg->{passwd}\n" } $config_file;
-    log::l("[drakproxy] Installation complete, exiting\n");
-}
-
-#---------------------------------------------
-#                WONDERFULL pad
-#---------------------------------------------
-1;
diff --git a/perl-install/raid.pm b/perl-install/raid.pm
deleted file mode 100644
index 0d0a8720a..000000000
--- a/perl-install/raid.pm
+++ /dev/null
@@ -1,168 +0,0 @@
-package raid; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table qw(:types);
-use run_program;
-use devices;
-use modules;
-use fs;
-
-sub nb { 
-    my ($nb) = @_;
-    first((ref $nb ? $nb->{device} : $nb) =~ /(\d+)/);
-}
-
-sub new {
-    my ($raids, @parts) = @_;
-    my $nb = @$raids; 
-    $raids->[$nb] = { 'chunk-size' => "64k", type => 0x83, disks => [ @parts ], device => "md$nb", notFormatted => 1, level => 1 };
-    foreach my $part (@parts) {
-	$part->{raid} = $nb;
-	delete $part->{mntpoint};
-    }
-    update($raids->[$nb]);
-    $nb;
-}
-
-sub add {
-    my ($raids, $part, $nb) = @_; $nb = nb($nb);
-    $raids->[$nb]{isMounted} and die _("Can't add a partition to _formatted_ RAID md%d", $nb);
-    $part->{raid} = $nb;
-    delete $part->{mntpoint};
-    push @{$raids->[$nb]{disks}}, $part;
-    update($raids->[$nb]);
-}
-
-sub delete {
-    my ($raids, $nb) = @_;
-    $nb = nb($nb);
-
-    delete $_->{raid} foreach @{$raids->[$nb]{disks}};
-    undef $raids->[$nb];
-}
-
-sub changeNb {
-    my ($raids, $oldnb, $newnb) = @_;
-    if ($oldnb != $newnb) {
-	($raids->[$newnb], $raids->[$oldnb]) = ($raids->[$oldnb], undef);
-	$raids->[$newnb]{device} = "md$newnb";
-	$_->{raid} = $newnb foreach @{$raids->[$newnb]{disks}};
-    }
-    $newnb;
-}
-
-sub removeDisk {
-    my ($raids, $part) = @_;
-    my $nb = nb($part->{raid});
-    run_program::run("raidstop", devices::make($part->{device}));
-    delete $part->{raid};
-    my $disks = $raids->[$nb]{disks};
-    @$disks = grep { $_ != $part } @$disks;
-    if (@$disks) {
-	update($raids->[$nb]);
-    } else {
-	undef $raids->[$nb];
-    }
-}
-
-sub updateSize {
-    my ($part) = @_;
-    local $_ = $part->{level};
-    my @l = map { $_->{size} } @{$part->{disks}};
-
-    $part->{size} = do {
-	if (/0|linear/) { sum @l        }
-	elsif (/1/  )   { min @l        }
-	elsif (/4|5/)   { min(@l) * $#l }
-    };
-}
-
-sub module {
-    my ($part) = @_;
-    my $mod = $part->{level};
-
-    $mod = 5 if $mod eq "4";
-    $mod = "raid$mod" if $mod =~ /^\d+$/;
-    $mod;
-}
-
-sub updateIsFormatted {
-    my ($part) = @_;
-    $part->{isFormatted}  = and_ map { $_->{isFormatted}  } @{$part->{disks}};
-    $part->{notFormatted} = and_ map { $_->{notFormatted} } @{$part->{disks}};
-}
-sub update {
-    foreach (@_) {
-	updateSize($_);
-	updateIsFormatted($_);
-    }
-}
-
-sub write {
-    my ($raids, $file) = @_;
-    local *F;
-    local $\ = "\n";
-    open F, ">$file" or die _("Can't write file %s", $file);
-
-    foreach (grep {$_} @$raids) {
-	print F <<"EOF";
-raiddev       /dev/$_->{device}
-raid-level    $_->{level}
-chunk-size    $_->{'chunk-size'}
-persistent-superblock 1
-EOF
-	print F "nr-raid-disks ", int @{$_->{disks}};
-	map_index {	    
-	    print F "    device    ", devices::make($_->{device});
-	    print F "    raid-disk $::i";
-	} @{$_->{disks}};
-    }
-}
-
-sub make {
-    my ($raids, $part) = @_;
-    isRAID($_) and make($raids, $_) foreach @{$part->{disks}};
-    my $dev = devices::make($part->{device});
-    eval { modules::load(module($part)) };
-    &write($raids, "/etc/raidtab");
-    run_program::run("raidstop", $dev);
-    run_program::run("mkraid", "--really-force", $dev) or die
-	$::isStandalone ? _("mkraid failed (maybe raidtools are missing?)") : _("mkraid failed");
-}
-
-sub format_part {
-    my ($raids, $part) = @_;
-    $part->{isFormatted} and return;
-
-    make($raids, $part);
-    fs::real_format_part($part);
-    $_->{isFormatted} = 1 foreach @{$part->{disks}};
-}
-
-sub verify {
-    my ($raids) = @_;
-    $raids or return;
-    foreach (grep {$_} @$raids) {
-	@{$_->{disks}} >= ($_->{level} =~ /4|5/ ? 3 : 2) or die _("Not enough partitions for RAID level %d\n", $_->{level});
-    }
-}
-
-sub prepare_prefixed {
-    my ($raids, $prefix) = @_;
-    $raids or return;
-
-    eval { cp_af("/etc/raidtab", "$prefix/etc/raidtab") };
-    foreach (grep {$_} @$raids) {
-	devices::make("$prefix/dev/$_->{device}") foreach @{$_->{disks}};
-    }
-}
-
-sub stopAll() { run_program::run("raidstop", devices::make("md$_")) foreach 0..7 }
-
-1;
diff --git a/perl-install/resize_fat/.cvsignore b/perl-install/resize_fat/.cvsignore
deleted file mode 100644
index 3001c7424..000000000
--- a/perl-install/resize_fat/.cvsignore
+++ /dev/null
@@ -1,5 +0,0 @@
-blib
-pm_to_blib
-Makefile_c
-c_rewritten.c
-c_rewritten.bs
diff --git a/perl-install/resize_fat/Makefile b/perl-install/resize_fat/Makefile
deleted file mode 100644
index a82ca8441..000000000
--- a/perl-install/resize_fat/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-.PHONY: clean
-
-c_rewritten: %: %.xs
-	test -e Makefile_c || perl Makefile.PL
-	$(MAKE) -f Makefile_c LD_RUN_PATH=
-	rm -f ../auto/resize_fat ; ln -s ../resize_fat/blib/arch/auto ../auto/resize_fat
-
-clean:
-	test ! -e Makefile_c || $(MAKE) -f Makefile_c clean
-	rm -f *~ *.o
diff --git a/perl-install/resize_fat/Makefile.PL b/perl-install/resize_fat/Makefile.PL
deleted file mode 100644
index 712f4e395..000000000
--- a/perl-install/resize_fat/Makefile.PL
+++ /dev/null
@@ -1,13 +0,0 @@
-use ExtUtils::MakeMaker;
-# See lib/ExtUtils/MakeMaker.pm for details of how to influence
-# the contents of the Makefile that is written.
-
-WriteMakefile(
-    'MAKEFILE'  => 'Makefile_c',
-    'NAME'	=> 'c_rewritten',
-    'OPTIMIZE'  => '-Os',
-    'VERSION_FROM' => 'c_rewritten.pm', # finds $VERSION
-    'LIBS'	=> '',   # e.g., '-lm' 
-    'DEFINE'	=> '',     # e.g., '-DHAVE_SOMETHING' 
-    'INC'	=> '',     # e.g., '-I/usr/include/other' 
-);
diff --git a/perl-install/resize_fat/README b/perl-install/resize_fat/README
deleted file mode 100644
index 12b64dea9..000000000
--- a/perl-install/resize_fat/README
+++ /dev/null
@@ -1,8 +0,0 @@
-TODO:
-
-resize_fat::fat::update($fs) should be called before doing undoable things
-(before the sync in construct_dir_tree)
-
-BUGS:
-no known bugs :)
-if you found one, please mail pixel@mandrakesoft.com !!
diff --git a/perl-install/resize_fat/any.pm b/perl-install/resize_fat/any.pm
deleted file mode 100644
index f811e7159..000000000
--- a/perl-install/resize_fat/any.pm
+++ /dev/null
@@ -1,123 +0,0 @@
-package resize_fat::any; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($FREE $FILE $DIRECTORY $UNMOVEABLE);
-
-use common;
-use resize_fat::fat;
-use resize_fat::directory;
-use resize_fat::dir_entry;
-use resize_fat::c_rewritten;
-
-
-$FREE       = 0;
-$FILE       = 1;
-$DIRECTORY  = 2;
-$UNMOVEABLE = 8;
-
-
-1;
-
-
-#- returns the number of clusters for a given filesystem type
-sub min_cluster_count($) {
-    my ($fs) = @_;
-    (1 << $ {{ FAT16 => 12, FAT32 => 12 }}{$fs->{fs_type}}) - 12;
-}
-sub max_cluster_count($) {
-    my ($fs) = @_;
-    (1 << $ {{ FAT16 => 16, FAT32 => 28 }}{$fs->{fs_type}}) - 11;
-}
-
-
-
-#- patch to get the function last_used that return the last used cluster of a fs.
-sub last_used($) {
-    my ($fs) = @_;
-
-    #- count in negative so absolute value count back to 2.
-    foreach (-($fs->{nb_clusters}+1)..-2) { return -$_ if resize_fat::c_rewritten::flag(-$_) }
-    die "any: empty FAT table of $fs->{nb_clusters} clusters";
-}
-#- patch to get the function last_unmoveable that return the last unmoveable cluster of a fs.
-sub last_unmoveable($) {
-    my ($fs) = @_;
-
-    #- count in negative so absolute value count back to 2.
-    foreach (-($fs->{nb_clusters}+1)..-2) { return -$_ if 0x8 & resize_fat::c_rewritten::flag(-$_) }
-
-    #- Oh at this point there are no unmoveable blocks!
-    2;
-}
-
-#- calculates the minimum size of a partition, in physical sectors
-sub min_size($) {
-    my ($fs) = @_;
-    my $count = $fs->{clusters}{count};
-
-    #- directories are both in `used' and `dirs', so are counted twice
-    #- It's done on purpose since we're moving all directories. So at the worse
-    #- moment, 2 directories are there, but that way nothing wrong can happen :)
-    my $min_cluster_count = max(2 + $count->{used} + $count->{bad} + $count->{dirs}, min_cluster_count($fs));
-    $min_cluster_count = max($min_cluster_count, last_unmoveable($fs));
-
-    my $size = $min_cluster_count * divide($fs->{cluster_size}, $SECTORSIZE) +
-      divide($fs->{cluster_offset}, $SECTORSIZE) +
-    64*1024*1024 / $SECTORSIZE; #- help with such more sectors (ie 64Mb).
-    
-    #- help zindozs again with 512Mb+ at least else partition is ignored.
-    if ($resize_fat::isFAT32) {
-        $size = max($size, 524*1024*1024 / $SECTORSIZE);
-    }
-    $size;
-
-}
-#- calculates the maximum size of a partition, in physical sectors
-sub max_size($) {
-    my ($fs) = @_;
-
-    my $max_cluster_count = min($fs->{nb_fat_entries} - 2, max_cluster_count($fs));
-
-    $max_cluster_count * divide($fs->{cluster_size}, $SECTORSIZE) +
-	divide($fs->{cluster_offset}, $SECTORSIZE);
-}
-#- calculates used size in order to avoid modifying anything.
-sub used_size($) {
-    my ($fs) = @_;
-
-    my $used_cluster_count = max(last_used($fs), min_cluster_count($fs));
-
-    $used_cluster_count * divide($fs->{cluster_size}, $SECTORSIZE) +
-	divide($fs->{cluster_offset}, $SECTORSIZE);
-}
-
-#- fills in fat_flag_map in c_rewritten.
-#- Each FAT entry is flagged as either FREE, FILE or DIRECTORY.
-sub flag_clusters {
-    my ($fs) = @_;
-    my ($cluster, $curr_dir_name, $entry, $type, $nb_dirs);
-
-    my $f = sub {
-	($curr_dir_name, $entry) = @_;
-	$cluster = resize_fat::dir_entry::get_cluster($entry);
-
-	if (resize_fat::dir_entry::is_file($entry)) {
-	    $type = $FILE;
-	    $type |= $UNMOVEABLE if resize_fat::dir_entry::is_unmoveable($entry);
-	} elsif (resize_fat::dir_entry::is_directory($entry)) {
-	    $type = $DIRECTORY;
-	} else { return }
-
-	my $nb = resize_fat::c_rewritten::checkFat($cluster, $type, "$curr_dir_name/$entry->{name}");
-	print "resize_fat:flag_clusters: check fat returned $nb of type $type for $curr_dir_name/$entry->{name}\n";
-	$nb_dirs += $nb if $type == $DIRECTORY;
-	0;
-    };
-
-    #- this must call allocate_fat_flag that zeroes the buffer allocated.
-    resize_fat::c_rewritten::allocate_fat_flag($fs->{nb_clusters} + 2);
-
-    resize_fat::directory::traverse_all($fs, $f);
-    $fs->{clusters}{count}{dirs} = $nb_dirs;
-}
diff --git a/perl-install/resize_fat/boot_sector.pm b/perl-install/resize_fat/boot_sector.pm
deleted file mode 100644
index c87328637..000000000
--- a/perl-install/resize_fat/boot_sector.pm
+++ /dev/null
@@ -1,110 +0,0 @@
-package resize_fat::boot_sector; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use resize_fat::io;
-use resize_fat::any;
-use resize_fat::directory;
-
-
-#- Oops, this will be unresizable on big-endian machine. trapped by signature.
-my $format = "a3 a8 S C S C S S C S S S I I I S S I S S a458 S";
-my @fields = (
-    'boot_jump',		#- boot strap short or near jump
-    'system_id',		#- Name - can be used to special case partition manager volumes
-    'sector_size',		#- bytes per logical sector
-    'cluster_size_in_sectors',	#- sectors/cluster
-    'nb_reserved',		#- reserved sectors
-    'nb_fats',			#- number of FATs
-    'nb_root_dir_entries',	#- number of root directory entries
-    'small_nb_sectors',		#- number of sectors: big_nb_sectors supersedes
-    'media',			#- media code
-    'fat16_fat_length',		#- sectors/FAT for FAT12/16
-    'sectors_per_track',
-    'nb_heads',
-    'nb_hidden',		#- (unused)
-    'big_nb_sectors',		#- number of sectors (if small_nb_sectors == 0)
-
-#- FAT32-only entries
-    'fat32_fat_length',		#- size of FAT in sectors
-    'fat32_flags',		#- bit8: fat mirroring,
-				#- low4: active fat
-    'fat32_version',		#- minor * 256 + major
-    'fat32_root_dir_cluster',
-    'info_offset_in_sectors',
-    'fat32_backup_sector',
-
-#- Common again...
-    'boot_code',		#- Boot code (or message)
-    'boot_sign',		#- 0xAA55
-);
-
-1;
-
-
-#- trimfs_init_boot_sector() - reads in the boot sector - gets important info out
-#- of boot sector, and puts in main structure - performs sanity checks - returns 1
-#- on success, 0 on failureparameters: filesystem an empty structure to fill.
-sub read($) {
-    my ($fs) = @_;
-
-    my $boot = eval { resize_fat::io::read($fs, 0, $SECTORSIZE) }; $@ and die "reading boot sector failed on device $fs->{fs_name}";
-    @{$fs}{@fields} = unpack $format, $boot;
-
-    $fs->{nb_sectors} = $fs->{small_nb_sectors} || $fs->{big_nb_sectors};
-    $fs->{cluster_size} = $fs->{cluster_size_in_sectors} * $fs->{sector_size};
-
-    $fs->{boot_sign} == 0xAA55 or die "Invalid signature for a MS-based filesystem.\n";
-    $fs->{nb_sectors} < 32 and die "Too few sectors for viable file system\n";
-    $fs->{nb_fats} == 2 or cdie "Weird number of FATs: $fs->{nb_fats}, not 2.\n";
-    $fs->{sector_size} == 512 or cdie "Strange sector_size != 512\n";
-
-    if ($fs->{fat16_fat_length}) {
-	#- asserting FAT16, will be verified later on
-	$resize_fat::isFAT32 = 0;
-        $fs->{fs_type} = 'FAT16';
-	$fs->{fs_type_size} = 16;
-	$fs->{fat_length} = $fs->{fat16_fat_length};
-	$resize_fat::bad_cluster_value = 0xfff7; #- 2**16 - 1
-    } else {
-	$resize_fat::isFAT32 = 1;
-        $fs->{fs_type} = 'FAT32';
-        $fs->{fs_type_size} = 32;
-	$fs->{fat_length} = $fs->{fat32_fat_length};
-
-	$fs->{nb_root_dir_entries} = 0;
-	$fs->{info_offset} = $fs->{info_offset_in_sectors} * $fs->{sector_size};
-	$resize_fat::bad_cluster_value = 0x0ffffff7;
-    }
-
-    $fs->{fat_offset} = $fs->{nb_reserved} * $fs->{sector_size};
-    $fs->{fat_size} = $fs->{fat_length} * $fs->{sector_size};
-    $fs->{root_dir_offset} = $fs->{fat_offset} + $fs->{fat_size} * $fs->{nb_fats};
-    $fs->{root_dir_size} = $fs->{nb_root_dir_entries} * resize_fat::directory::entry_size();
-    $fs->{cluster_offset} = $fs->{root_dir_offset} + $fs->{root_dir_size} - 2 * $fs->{cluster_size};
-
-    $fs->{nb_fat_entries} = divide($fs->{fat_size}, $fs->{fs_type_size} / 8);
-
-    #- - 2 because clusters 0 & 1 doesn't exist
-    $fs->{nb_clusters} = divide($fs->{nb_sectors} * $fs->{sector_size} - $fs->{cluster_offset}, $fs->{cluster_size}) - 2;
-
-    $fs->{dir_entries_per_cluster} = divide($fs->{cluster_size}, psizeof($format));
-
-#-    $fs->{nb_clusters} >= resize_fat::any::min_cluster_count($fs) or die "error: not enough sectors for a $fs->{fs_type}\n";
-    $fs->{nb_clusters} <  resize_fat::any::max_cluster_count($fs) or die "error: too many sectors for a $fs->{fs_type}\n";
-}
-
-sub write($) {
-    my ($fs) = @_;
-    my $boot = pack($format, @{$fs}{@fields});
-
-    eval { resize_fat::io::write($fs, 0, $SECTORSIZE, $boot) }; $@ and die "writing the boot sector failed on device $fs->{fs_name}";
-
-    if ($resize_fat::isFAT32) {
-	#- write backup
-	eval { resize_fat::io::write($fs, $fs->{fat32_backup_sector} * $SECTORSIZE, $SECTORSIZE, $boot) };
-	$@ and die "writing the backup boot sector (#$fs->{fat32_backup_sector}) failed on device $fs->{fs_name}";
-    }
-}
diff --git a/perl-install/resize_fat/c_rewritten.pm b/perl-install/resize_fat/c_rewritten.pm
deleted file mode 100644
index d74ecb5d3..000000000
--- a/perl-install/resize_fat/c_rewritten.pm
+++ /dev/null
@@ -1,14 +0,0 @@
-package resize_fat::c_rewritten; # $Id$
-
-use strict;
-use vars qw($VERSION @ISA);
-
-require DynaLoader;
-
-@ISA = qw(DynaLoader);
-$VERSION = '0.01';
-
-bootstrap resize_fat::c_rewritten $VERSION;
-
-1;
-
diff --git a/perl-install/resize_fat/c_rewritten.xs b/perl-install/resize_fat/c_rewritten.xs
deleted file mode 100644
index 92361097d..000000000
--- a/perl-install/resize_fat/c_rewritten.xs
+++ /dev/null
@@ -1,259 +0,0 @@
-#include "EXTERN.h"
-#include "perl.h"
-#include "XSUB.h"
-
-/* set by scan_fat, used by next */
-short *fat = NULL;
-char *fat_flag_map = NULL;
-unsigned int *fat_remap = NULL;
-int fat_remap_size;
-int type_size, nb_clusters, bad_cluster_value;
-
-void free_all() {
-#define FREE(p) if (p) free(p), p = NULL;
-  FREE(fat);
-  FREE(fat_flag_map);
-  FREE(fat_remap);
-#undef FREE
-}
-
-unsigned int next(unsigned int cluster) {
-  short *p = fat + type_size * cluster;
-  if (!fat) {
-    free_all();
-    croak("fat::next: trying to use null pointer");
-  }
-  if (cluster >= nb_clusters + 2) {
-    free_all();
-    croak("fat::next: cluster %d outside filesystem", cluster);
-  }
-  return type_size == 1 ? *p : *((unsigned int *) p);
-}
-
-void set_next(unsigned int cluster, unsigned int val) {
-  short *p = fat + type_size * cluster;
-  if (!fat) {
-    free_all();
-    croak("fat::set_next: trying to use null pointer");
-  }
-  if (cluster >= nb_clusters + 2) {
-    free_all();
-    croak("fat::set_next: cluster %d outside filesystem", cluster);
-  }
-  type_size == 1 ? *p : *((unsigned int *) p) = val;
-}
-
-MODULE = resize_fat::c_rewritten PACKAGE = resize_fat::c_rewritten
-
-void 
-read_fat(fd, offset, size, magic)
-  int fd
-  int offset
-  int size
-  unsigned char magic
-  PPCODE:
-{
-  fat = (short *) malloc(size);
-  if (!fat) {
-    free_all();
-    croak("read_fat: not enough memory");
-  }
-  if (lseek(fd, offset, SEEK_SET) != offset ||
-      read(fd, fat, size) != size) {
-    free_all();
-    croak("read_fat: reading FAT failed");
-  }
-  if (magic != *(unsigned char *) fat) {
-    free_all();
-    croak("read_fat: FAT has invalid signature");
-  }
-}
-
-void
-write_fat(fd, size)
-  int fd
-  int size
-  PPCODE:
-{
-  if (write(fd, fat, size) != size) {
-    free_all();
-    croak("write_fat: write failed");
-  }
-}
-
-void
-free_all()
-  PPCODE:
-  free_all();
-
-void
-scan_fat(nb_clusters_, type_size_)
-  int nb_clusters_
-  int type_size_
-  PPCODE:
-{
-  unsigned int v;  
-  int free = 0, bad = 0, used = 0;
-  short *p;
-  
-  type_size = type_size_; nb_clusters = nb_clusters_;
-  bad_cluster_value = type_size == 32 ? 0x0ffffff7 : 0xfff7;
-
-  if (type_size % 16) {
-    free_all();
-    croak("scan_fat: unable to handle FAT%d", type_size);
-  }
-  type_size /= 16;
-
-  for (p = fat + 2 * type_size; p < fat + type_size * (nb_clusters + 2); p += type_size) {
-    v = type_size == 1 ? *p : *((unsigned int *) p);
-
-    if (v == 0) free++;
-    else if (v == bad_cluster_value) bad++;
-  }
-  used = nb_clusters - free - bad;
-  EXTEND(SP, 3);
-  PUSHs(sv_2mortal(newSViv(free)));
-  PUSHs(sv_2mortal(newSViv(bad)));
-  PUSHs(sv_2mortal(newSViv(used)));
-}
-
-unsigned int
-next(unused, cluster)
-  void *unused
-  unsigned int cluster
-  CODE:
-  RETVAL = next(cluster);
-  OUTPUT:
-  RETVAL
-
-void
-set_next(unused, cluster, val)
-  void *unused
-  unsigned int cluster
-  unsigned int val
-  CODE:
-  set_next(cluster, val);
-
-void
-allocate_fat_flag(size)
-  int size
-  CODE:
-  fat_flag_map = calloc(size, 1);
-  if (!fat_flag_map) {
-    free_all();
-    croak("allocate_fat_flag: not enough memory");
-  }
-
-int
-checkFat(cluster, type, name)
-  unsigned int cluster
-  int type
-  char *name
-  CODE:
-  int nb = 0;
-
-  if (!fat_flag_map) {
-    free_all();
-    croak("Bad FAT: trying to use null pointer");
-  }
-  for (; cluster < bad_cluster_value; cluster = next(cluster)) {
-    if (cluster == 0) {
-      free_all();
-      croak("Bad FAT: unterminated chain for %s\n", name);
-    }
-    if (cluster >= nb_clusters + 2) {
-      free_all();
-      croak("Bad FAT: chain outside filesystem for %s\n", name);
-    }
-    if (fat_flag_map[cluster]) {
-      free_all();
-      croak("Bad FAT: cluster %d is cross-linked for %s\n", cluster, name);
-    }
-    fat_flag_map[cluster] = type;
-    nb++;
-  }
-  RETVAL = nb;
-  OUTPUT:
-  RETVAL
-
-unsigned int
-flag(cluster)
-  unsigned int cluster
-  CODE:
-  if (!fat_flag_map) {
-    free_all();
-    croak("Bad FAT: trying to use null pointer");
-  }
-  if (cluster >= nb_clusters + 2) {
-    free_all();
-    croak("Bad FAT: going outside filesystem");
-  }
-  RETVAL = fat_flag_map[cluster];
-  OUTPUT:
-  RETVAL
-
-void
-set_flag(cluster, flag)
-  unsigned int cluster
-  int flag
-  CODE:
-  if (!fat_flag_map) {
-    free_all();
-    croak("Bad FAT: trying to use null pointer");
-  }
-  if (cluster >= nb_clusters + 2) {
-    free_all();
-    croak("Bad FAT: going outside filesystem");
-  }
-  fat_flag_map[cluster] = flag;
-
-void
-allocate_fat_remap(size)
-  int size
-  CODE:
-  fat_remap_size = size;
-  fat_remap = (unsigned int *) calloc(size, sizeof(unsigned int *));
-  if (!fat_remap) {
-    free_all();
-    croak("allocate_fat_remap: not enough memory");
-  }
-
-unsigned int
-fat_remap(cluster)
-  unsigned int cluster
-  CODE:
-  if (!fat_remap) {
-    free_all();
-    croak("fat_remap: trying to use null pointer");
-  }
-  if (cluster >= bad_cluster_value) {
-    RETVAL = cluster; /* special cases */
-  } else {
-    if (cluster >= fat_remap_size) {
-      free_all();
-      croak("fat_remap: cluster %d >= %d in fat_remap", cluster, fat_remap_size);
-    }
-    RETVAL = fat_remap[cluster];
-  }
-  OUTPUT:
-  RETVAL
-
-void
-set_fat_remap(cluster, val)
-  unsigned int cluster
-  unsigned int val
-  CODE:
-  if (!fat_remap) {
-    free_all();
-    croak("set_fat_remap: trying to use null pointer");
-  }
-  if (cluster >= fat_remap_size) {
-    free_all();
-    croak("set_fat_remap: cluster %d >= %d in set_fat_remap", cluster, fat_remap_size);
-  }
-  if (val < bad_cluster_value && val >= fat_remap_size) {
-    free_all();
-    croak("set_fat_remap: remapping cluster %d to cluster %d >= %d in set_fat_remap", cluster, val, fat_remap_size);
-  }
-  fat_remap[cluster] = val;
diff --git a/perl-install/resize_fat/dir_entry.pm b/perl-install/resize_fat/dir_entry.pm
deleted file mode 100644
index b39c72094..000000000
--- a/perl-install/resize_fat/dir_entry.pm
+++ /dev/null
@@ -1,77 +0,0 @@
-package resize_fat::dir_entry; # $Id$
-
-use diagnostics;
-use strict;
-
-
-my $DELETED_FLAG      = 0xe5;
-
-my $READ_ONLY_ATTR    = 0x01;
-my $HIDDEN_ATTR       = 0x02;
-my $SYSTEM_ATTR       = 0x04;
-my $VOLUME_LABEL_ATTR = 0x08;
-my $VFAT_ATTR         = 0x0f;
-my $DIRECTORY_ATTR    = 0x10;
-
-1;
-
-sub get_cluster($) {
-    my ($entry) = @_;
-    $entry->{first_cluster} + ($resize_fat::isFAT32 ? $entry->{first_cluster_high} * (1 << 16) : 0);
-}
-sub set_cluster($$) {
-    my ($entry, $val) = @_;
-    $entry->{first_cluster} = $val & (1 << 16) - 1;
-    $entry->{first_cluster_high} = $val >> 16 if $resize_fat::isFAT32;
-}
-
-sub is_unmoveable($) {
-    my ($entry) = @_;
-    $entry->{attributes} & $HIDDEN_ATTR || $entry->{attributes} & $SYSTEM_ATTR;
-}
-
-sub is_directory($) {
-    my ($entry) = @_;
-    $entry->{attributes} & $DIRECTORY_ATTR && $entry->{name} !~ /^\.\.? / && !is_special_entry($entry);
-}
-
-sub is_volume($) {
-    my ($entry) = @_;
-    !is_special_entry($entry) && $entry->{attributes} & $VOLUME_LABEL_ATTR;
-}
-
-sub is_file($) {
-    my ($entry) = @_;
-    !is_special_entry($entry) && !is_directory($entry) && !is_volume($entry) && $entry->{length};
-}
-
-
-sub is_special_entry($) {
-    my ($entry) = @_;
-    my ($c) = unpack "C", $entry->{name};
-
-    #- skip empty slots, deleted files, and 0xF6?? (taken from kernel)
-    $c == 0 || $c == $DELETED_FLAG || $c == 0xF6 and return 1;
-
-    $entry->{attributes} == $VFAT_ATTR and return 1;
-    0;
-}
-
-
-#- return true if entry has been modified
-#- curr_dir_name is added to contains current directory name, "" for root.
-sub remap {
-    my ($curr_dir_name, $entry) = @_;
-
-    is_special_entry($entry) and return;
-
-    my $cluster = get_cluster($entry);
-    my $new_cluster = resize_fat::c_rewritten::fat_remap($cluster);
-
-    #-print "remapping cluster ", get_cluster($entry), " to $new_cluster";
-
-    $new_cluster == $cluster and return; #- no need to modify
-
-    set_cluster($entry, $new_cluster);
-    1;
-}
diff --git a/perl-install/resize_fat/directory.pm b/perl-install/resize_fat/directory.pm
deleted file mode 100644
index 1f2b1ede6..000000000
--- a/perl-install/resize_fat/directory.pm
+++ /dev/null
@@ -1,79 +0,0 @@
-package resize_fat::directory; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use resize_fat::dir_entry;
-use resize_fat::io;
-
-
-my $format = "a8 a3 C C C S7 I";
-my @fields = (
-    'name',
-    'extension',
-    'attributes',
-    'is_upper_case_name',
-    'creation_time_low',	#- milliseconds
-    'creation_time_high',
-    'creation_date',
-    'access_date',
-    'first_cluster_high',	#- for FAT32
-    'time',
-    'date',
-    'first_cluster',
-    'length',
-);
-my $psizeof_format = psizeof($format);
-
-1;
-
-sub entry_size { $psizeof_format }
-
-#- call `f' for each entry of the directory
-#- if f return true, then modification in the entry are taken back
-sub traverse($$$) {
-    my ($directory, $curr_dir_name, $f) = @_;
-
-    for (my $i = 0;; $i++) {
-	my $raw = \substr($directory, $i * $psizeof_format, $psizeof_format);
-
-	#- empty entry means end of directory
-	$$raw =~ /^\0*$/ and return $directory;
-
-	my $entry; @{$entry}{@fields} = unpack $format, $$raw;
-
-	&$f($curr_dir_name, $entry)
-	    and	$$raw = pack $format, @{$entry}{@fields};
-    }
-    $directory;
-}
-
-sub traverse_all($$) {
-    my ($fs, $f) = @_;
-
-    my $traverse_all; $traverse_all = sub {
-	my ($curr_dir_name, $entry) = @_;
-
-	&$f($curr_dir_name, $entry);
-
-        resize_fat::dir_entry::is_directory($entry)
-	    and traverse(resize_fat::io::read_file($fs, resize_fat::dir_entry::get_cluster($entry)), "$curr_dir_name/$entry->{name}", $traverse_all);
-
-	undef; #- no need to write back (cf traverse)
-    };
-
-    my $directory = $resize_fat::isFAT32 ?
-	resize_fat::io::read_file($fs, $fs->{fat32_root_dir_cluster}) :
-	resize_fat::io::read($fs, $fs->{root_dir_offset}, $fs->{root_dir_size});
-    traverse($directory, "", $traverse_all);
-    undef $traverse_all; #- circular reference is no good for perl's poor GC :(
-}
-
-
-#- function used by construct_dir_tree to translate the `cluster' fields in each
-#- directory entry
-sub remap($$) {
-    my ($fs, $directory) = @_;
-    traverse($directory, "", \&resize_fat::dir_entry::remap);
-}
diff --git a/perl-install/resize_fat/fat.pm b/perl-install/resize_fat/fat.pm
deleted file mode 100644
index 31643f0a3..000000000
--- a/perl-install/resize_fat/fat.pm
+++ /dev/null
@@ -1,138 +0,0 @@
-package resize_fat::fat; # $Id$
-
-use diagnostics;
-use strict;
-
-use resize_fat::any;
-use resize_fat::io;
-use resize_fat::c_rewritten;
-
-1;
-
-sub read($) {
-    my ($fs) = @_;
-
-    resize_fat::c_rewritten::read_fat(fileno $fs->{fd}, $fs->{fat_offset}, $fs->{fat_size}, $fs->{media});
-
-    @{$fs->{clusters}{count}}{qw(free bad used)} =
-      resize_fat::c_rewritten::scan_fat($fs->{nb_clusters}, $fs->{fs_type_size});
-}
-
-sub write($) {
-    my ($fs) = @_;
-
-    sysseek $fs->{fd}, $fs->{fat_offset}, 0 or die "write_fat: seek failed";
-    foreach (1..$fs->{nb_fats}) {
-	resize_fat::c_rewritten::write_fat(fileno $fs->{fd}, $fs->{fat_size});
-    }
-}
-
-
-
-#- allocates where all the clusters will be moved to. Clusters before cut_point
-#- remain in the same position, however cluster that are part of a directory are
-#- moved regardless (this is a mechanism to prevent data loss) (cut_point is the
-#- first cluster that won't occur in the new fs)
-sub allocate_remap {
-    my ($fs, $cut_point) = @_;
-    my ($cluster, $new_cluster);
-    my $remap = sub { resize_fat::c_rewritten::set_fat_remap($cluster, $new_cluster) };
-    my $get_new = sub {
-	$new_cluster = get_free($fs);
-	0 < $new_cluster && $new_cluster < $cut_point or die "no free clusters";
-	set_eof($fs, $new_cluster); #- mark as used
-	#-log::ld("resize_fat: [$cluster,", &next($fs, $cluster), "...]->$new_cluster...");
-    };
-
-    #- this must call allocate_fat_remap that zeroes the buffer allocated.
-    resize_fat::c_rewritten::allocate_fat_remap($fs->{nb_clusters} + 2);
-
-    $fs->{last_free_cluster} = 2;
-    for ($cluster = 2; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
-	if ($cluster < $cut_point) {
-	    if (resize_fat::c_rewritten::flag($cluster) == $resize_fat::any::DIRECTORY) {
-		&$get_new();
-	    } else {
-		$new_cluster = $cluster;
-	    }
-	    &$remap();
-	} elsif (!is_empty(&next($fs, $cluster))) {
-	    &$get_new();
-	    &$remap();
-	 }
-    }
-}
-
-
-#- updates the fat for the resized filesystem
-sub update {
-    my ($fs) = @_;
-
-    for (my $cluster = 2; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
-	 if (resize_fat::c_rewritten::flag($cluster)) {
-	     my $old_next = &next($fs, $cluster);
-	     my $new      = resize_fat::c_rewritten::fat_remap($cluster);
-	     my $new_next = resize_fat::c_rewritten::fat_remap($old_next);
-
-	     set_available($fs, $cluster);
-
-	     is_eof($old_next) ?
-		 set_eof($fs, $new) :
-		 set_next ($fs, $new, $new_next);
-	 }
-    }
-}
-
-
-sub endianness16($) { (($_[0] & 0xff) << 8) + ($_[0] >> 8); }
-sub endianness($$) {
-    my ($val, $nb_bits) = @_;
-    my $r = 0;
-    for (; $nb_bits > 0; $nb_bits -= 8) {
-	$r <<= 8;
-	$r += $val & 0xff;
-	$val >>= 8;
-    }
-    $nb_bits < 0 and die "error: endianness only handle numbers divisible by 8";
-    $r;
-}
-
-*next = \&resize_fat::c_rewritten::next;
-*set_next = \&resize_fat::c_rewritten::set_next;
-
-
-
-sub get_free($) {
-    my ($fs) = @_;
-    foreach (my $i = 0; $i < $fs->{nb_clusters}; $i++) {
-        my $cluster = ($i + $fs->{last_free_cluster} - 2) % $fs->{nb_clusters} + 2;
-        is_available(&next($fs, $cluster)) and return $fs->{last_free_cluster} = $cluster;
-    }
-    die "no free clusters";
-}
-
-#-    returns true if <cluster> represents an EOF marker
-sub is_eof($) {
-    my ($cluster) = @_;
-    $cluster >= $resize_fat::bad_cluster_value;
-}
-sub set_eof($$) {
-    my ($fs, $cluster) = @_;
-    set_next ($fs, $cluster, $resize_fat::bad_cluster_value + 1);
-}
-
-#-    returns true if <cluster> is empty.  Note that this includes bad clusters.
-sub is_empty($) {
-    my ($cluster) = @_;
-    $cluster == 0 || $cluster == $resize_fat::bad_cluster_value;
-}
-
-#-    returns true if <cluster> is available.
-sub is_available($) {
-    my ($cluster) = @_;
-    $cluster == 0;
-}
-sub set_available($$) {
-    my ($fs, $cluster) = @_;
-    set_next ($fs, $cluster, 0);
-}
diff --git a/perl-install/resize_fat/info_sector.pm b/perl-install/resize_fat/info_sector.pm
deleted file mode 100644
index 35449cedc..000000000
--- a/perl-install/resize_fat/info_sector.pm
+++ /dev/null
@@ -1,37 +0,0 @@
-package resize_fat::info_sector; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use resize_fat::io;
-
-#- Oops, this will be unresizable on big-endian machine. trapped by signature.
-my $format = "a484 I I I a16";
-my @fields = (
-    'unused',
-    'signature',		#- should be 0x61417272
-    'free_clusters',		#- -1 for unknown
-    'next_cluster',		#- most recently allocated cluster
-    'unused2',
-);
-
-1;
-
-
-sub read($) {
-    my ($fs) = @_;
-    my $info = resize_fat::io::read($fs, $fs->{info_offset}, psizeof($format));
-    @{$fs->{info_sector}}{@fields} = unpack $format, $info;
-    $fs->{info_sector}{signature} == 0x61417272 or die "Invalid information sector signature\n";
-}
-
-sub write($) {
-    my ($fs) = @_;
-    $fs->{info_sector}{free_clusters} = $fs->{clusters}->{count}->{free};
-    $fs->{info_sector}{next_cluster} = 2;
-
-    my $info = pack $format, @{$fs->{info_sector}}{@fields};
-
-    resize_fat::io::write($fs, $fs->{info_offset}, psizeof($format), $info);
-}
diff --git a/perl-install/resize_fat/io.pm b/perl-install/resize_fat/io.pm
deleted file mode 100644
index 7643a0953..000000000
--- a/perl-install/resize_fat/io.pm
+++ /dev/null
@@ -1,71 +0,0 @@
-package resize_fat::io; # $Id$
-
-use diagnostics;
-use strict;
-
-use resize_fat::fat;
-use c;
-
-1;
-
-
-sub read($$$) {
-    my ($fs, $pos, $size) = @_;
-    print "reading $size bytes at $pos\n";
-    my $buf = "\0" x $size;
-    sysseek $fs->{fd}, $pos, 0 or die "seeking to byte #$pos failed on device $fs->{fs_name}";
-    sysread $fs->{fd}, $buf, $size or die "reading at byte #$pos failed on device $fs->{fs_name}";
-    $buf;
-}
-sub write($$$$) {
-    my ($fs, $pos, $size, $buf) = @_;
-    sysseek $fs->{fd}, $pos, 0 or die "seeking to byte #$pos failed on device $fs->{fs_name}";
-    syswrite $fs->{fd}, $buf or die "writing at byte #$pos failed on device $fs->{fs_name}";
-}
-
-sub read_cluster($$) {
-    my ($fs, $cluster) = @_;
-    my $buf;
-    my $pos = $fs->{cluster_offset} / 512 + $cluster * ($fs->{cluster_size} / 512);
-
-    c::lseek_sector(fileno $fs->{fd}, $pos, 0) or die "seeking to sector #$pos failed on device $fs->{fs_name}";
-    sysread $fs->{fd}, $buf, $fs->{cluster_size} or die "reading at sector #$pos failed on device $fs->{fs_name}";
-    $buf;
-}
-sub write_cluster($$$) {
-    my ($fs, $cluster, $buf) = @_;
-    my $pos = $fs->{cluster_offset} / 512 + $cluster * ($fs->{cluster_size} / 512);
-
-    c::lseek_sector(fileno $fs->{fd}, $pos, 0) or die "seeking to sector #$pos failed on device $fs->{fs_name}";
-    syswrite $fs->{fd}, $buf or die "writing at sector #$pos failed on device $fs->{fs_name}";
-}
-
-sub read_file($$) {
-    my ($fs, $cluster) = @_;
-    my $buf = '';
-
-    for (; !resize_fat::fat::is_eof($cluster); $cluster = resize_fat::fat::next ($fs, $cluster)) {
-	$cluster == 0 and die "Bad FAT: unterminated chain\n";
-	$buf .= read_cluster($fs, $cluster);
-    }
-    $buf;
-}
-
-sub check_mounted($) {
-    my ($f) = @_;
-
-    local *F;
-    open F, "/proc/mounts" or die "error opening /proc/mounts\n";
-    foreach (<F>) {
-	/^$f\s/ and die "device is mounted";
-    }
-}
-
-sub open($) {
-    my ($fs) = @_;
-
-    check_mounted($fs->{device});
-
-    sysopen F, $fs->{fs_name}, 2 or sysopen F, $fs->{fs_name}, 0 or die "error opening device $fs->{fs_name} for writing\n";
-    $fs->{fd} = *F;
-}
diff --git a/perl-install/resize_fat/main.pm b/perl-install/resize_fat/main.pm
deleted file mode 100644
index 81dfb6b3f..000000000
--- a/perl-install/resize_fat/main.pm
+++ /dev/null
@@ -1,186 +0,0 @@
-#!/usr/bin/perl
-
-# DiskDrake
-# Copyright (C) 1999 MandrakeSoft (pixel@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# This is mainly a perl rewrite of the work of Andrew Clausen (libresize)
-
-package resize_fat::main; # $Id$
-
-use diagnostics;
-use strict;
-
-use log;
-use common;
-use MDK::Common::System;
-use resize_fat::boot_sector;
-use resize_fat::info_sector;
-use resize_fat::directory;
-use resize_fat::io;
-use resize_fat::fat;
-use resize_fat::any;
-
-
-1;
-
-#- - reads in the boot sector/partition info., and tries to make some sense of it
-sub new($$$) {
-    my ($type, $device, $fs_name) = @_;
-    my $fs = { device => $device, fs_name => $fs_name } ;
-
-    eval {
-	resize_fat::io::open($fs);
-	resize_fat::boot_sector::read($fs);
-	$resize_fat::isFAT32 and eval { resize_fat::info_sector::read($fs) };
-	resize_fat::fat::read($fs);
-	resize_fat::any::flag_clusters($fs);
-    };
-    if ($@) {
-	close $fs->{fd};
-	die;
-    }
-    bless $fs, $type;
-}
-
-sub DESTROY {
-    my ($fs) = @_;
-    close $fs->{fd};
-    resize_fat::c_rewritten::free_all();
-}
-
-#- copy all clusters >= <start_cluster> to a new place on the partition, less
-#- than <start_cluster>. Only copies files, not directories.
-#- (use of buffer needed because the seeks slow like hell the hard drive)
-sub copy_clusters {
-    my ($fs, $cluster) = @_;
-    my @buffer;
-    my $flush = sub {
-	while (@buffer) {
-	    my $cluster = shift @buffer;
-	    resize_fat::io::write_cluster($fs, $cluster, shift @buffer);
-	}
-    };
-    for (; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
-	resize_fat::c_rewritten::flag($cluster) == $resize_fat::any::FILE or next;
-	push @buffer, 
-	  resize_fat::c_rewritten::fat_remap($cluster), 
-	  resize_fat::io::read_cluster($fs, $cluster);
-	@buffer > 50 and &$flush();
-    }
-    &$flush();
-}
-
-#- Constructs the new directory tree to match the new file locations.
-sub construct_dir_tree {
-    my ($fs) = @_;
-
-    if ($resize_fat::isFAT32) {
-	#- fat32's root must remain in the first 64k clusters
-	#- so don't set it as DIRECTORY, it will be specially handled
-	resize_fat::c_rewritten::set_flag($fs->{fat32_root_dir_cluster}, $resize_fat::any::FREE);
-    }
-
-    for (my $cluster = 2; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
-	resize_fat::c_rewritten::flag($cluster) == $resize_fat::any::DIRECTORY or next;
-
-      resize_fat::io::write_cluster($fs,
-				    resize_fat::c_rewritten::fat_remap($cluster),
-				    resize_fat::directory::remap($fs, resize_fat::io::read_cluster($fs, $cluster)));
-    }
-
-    MDK::Common::System::sync();
-
-    #- until now, only free clusters have been written. it's a null operation if we stop here.
-    #- it means no corruption :)
-    #
-    #- now we must be as fast as possible!
-
-    #- remapping non movable root directory
-    if ($resize_fat::isFAT32) {
-	my $cluster = $fs->{fat32_root_dir_cluster};
-
-	resize_fat::io::write_cluster($fs,
-		      resize_fat::c_rewritten::fat_remap($cluster),
-		      resize_fat::directory::remap($fs, resize_fat::io::read_cluster($fs, $cluster)));
-    } else {
-	resize_fat::io::write($fs, $fs->{root_dir_offset}, $fs->{root_dir_size},
-			      resize_fat::directory::remap($fs, resize_fat::io::read($fs, $fs->{root_dir_offset}, $fs->{root_dir_size})));
-    }
-}
-
-sub min_size($) { &resize_fat::any::min_size }
-sub max_size($) { &resize_fat::any::max_size }
-sub used_size($) { &resize_fat::any::used_size }
-
-#- resize
-#- - size is in sectors
-#- - checks boundaries before starting
-#- - copies all data beyond new_cluster_count behind the frontier
-sub resize {
-    my ($fs, $size) = @_;
-
-    my ($min, $max) = (min_size($fs), max_size($fs));
-
-    $size += $min if $size =~ /^\+/;
-
-    $size >= $min or die "Minimum filesystem size is $min sectors";
-    $size <= $max or die "Maximum filesystem size is $max sectors";
-
-    log::l("resize_fat: Partition size will be ". ($size * $SECTORSIZE >> 20) ."Mb (well exactly ${size} sectors)");
-
-    my $new_data_size = $size * $SECTORSIZE - $fs->{cluster_offset};
-    my $new_nb_clusters = divide($new_data_size, $fs->{cluster_size});
-    my $used_size = used_size($fs);
-
-    log::l("resize_fat: Break point for moving files is ". ($used_size * $SECTORSIZE >> 20) ." Mb ($used_size sectors)");
-    if ($size < $used_size) {
-	log::l("resize_fat: Allocating new clusters");
-	resize_fat::fat::allocate_remap($fs, $new_nb_clusters);
-
-	log::l("resize_fat: Copying files");
-	copy_clusters($fs, $new_nb_clusters);
-
-	log::l("resize_fat: Copying directories");
-	construct_dir_tree($fs);
-
-	log::l("Writing new FAT...");
-	resize_fat::fat::update($fs);
-	resize_fat::fat::write($fs);
-    } else {
-	log::l("resize_fat: Nothing need to be moved");
-    }
-
-    $fs->{nb_sectors} = $size;
-    $fs->{nb_clusters} = $new_nb_clusters;
-    $fs->{clusters}{count}->{free} =
-      $fs->{nb_clusters} - $fs->{clusters}{count}->{used} - $fs->{clusters}->{count}->{bad} - 2;
-
-    $fs->{system_id} = 'was here!';
-    $fs->{small_nb_sectors} = 0;
-    $fs->{big_nb_sectors} = $size;
-
-    log::l("resize_fat: Writing new boot sector...");
-
-    resize_fat::boot_sector::write($fs);
-
-    $resize_fat::isFAT32 and eval { resize_fat::info_sector::write($fs) }; #- doesn't matter if this fails - its pretty useless!
-
-    MDK::Common::System::sync();
-    close $fs->{fd};
-    log::l("resize_fat: done");
-}
-
diff --git a/perl-install/run_program.pm b/perl-install/run_program.pm
deleted file mode 100644
index f56c59f4d..000000000
--- a/perl-install/run_program.pm
+++ /dev/null
@@ -1,70 +0,0 @@
-package run_program; # $Id$
-
-use diagnostics;
-use strict;
-
-use log;
-
-1;
-
-sub run_or_die {
-    my ($name, @args) = @_;
-    run($name, @args) or die "$name failed\n";
-}
-sub rooted_or_die {
-    my ($root, $name, @args) = @_;
-    rooted($root, $name, @args) or die "$name failed\n";
-}
-sub run { rooted('', @_) }
-
-sub rooted {
-    my ($root, $name, @args) = @_;
-    my $str = ref $name ? $name->[0] : $name;
-    log::l("running: $str @args" . ($root ? " with root $root" : ""));
-
-    return 1 if $root && $<;
-
-    $root ? $root .= '/' : ($root = '');
-    install_any::check_prog (ref $name ? $name->[0] : $name) if !$root && $::isInstall;
-
-    if (my $pid = fork) {
-	waitpid $pid, 0;
-	return $? == 0;
-    }
-    {
-	my ($stdout, $stdoutm, $stderr, $stderrm);
-	($stdoutm, $stdout, @args) = @args if $args[0] =~ /^>>?$/;
-	($stderrm, $stderr, @args) = @args if $args[0] =~ /^2>>?$/;
-
-	open STDIN, "/dev/null" or die "can't open /dev/null as stdin";
-
-	if ($stderr) {
-	    $stderrm =~ s/2//;
-	    open STDERR, "$stderrm $root$stderr" or die "run_program can't output in $root$stderr (mode `$stderrm')";
-	} elsif ($::isInstall) {
-	    open STDERR, ">> /tmp/ddebug.log" or open STDOUT, ">> /dev/tty7" or die "run_program can't log, give me access to /tmp/ddebug.log";
-	}
-	if ($stdout) {
-	    open STDOUT, "$stdoutm $root$stdout" or die "run_program can't output in $root$stdout (mode `$stdoutm')";
-	} elsif ($::isInstall) {
-	    open STDOUT, ">> /tmp/ddebug.log" or open STDOUT, ">> /dev/tty7" or die "run_program can't log, give me access to /tmp/ddebug.log";
-	}
-
-	$root and chroot $root;
-	chdir "/";
-
-	if (ref $name) {
-	    unless (exec { $name->[0] } $name->[1], @args) {
-		log::l("exec of $name->[0] failed: $!");
-		c::_exit(128);
-	    }
-	} else {
-	    unless (exec $name, @args) {
-		log::l("exec of $name failed: $!");
-		c::_exit(128);
-	    }
-
-	}
-    }
-
-}
diff --git a/perl-install/sbus_probing/main.pm b/perl-install/sbus_probing/main.pm
deleted file mode 100644
index 4aed43459..000000000
--- a/perl-install/sbus_probing/main.pm
+++ /dev/null
@@ -1,138 +0,0 @@
-package sbus_probing::main; # $Id$
-
-use c;
-use log;
-use common;
-use modules;
-
-my %sbus_table_network = (
-			  hme    => [ "Sun Happy Meal Ethernet", "sunhme" ],
-			  le     => [ "Sun Lance Ethernet", "ignore:lance" ],
-			  qe     => [ "Sun Quad Ethernet", "sunqe" ],
-			  mlanai => [ "MyriCOM MyriNET Gigabit Ethernet", "myri_sbus" ],
-			  myri   => [ "MyriCOM MyriNET Gigabit Ethernet", "myri_sbus" ],
-			 );
-my %sbus_table_scsi =    (
-			  soc   => [ "Sun SPARCStorage Array", "fc4:soc:pluto" ],
-			  socal => [ "Sun Enterprise Network Array", "fc4:socal:fcal" ],
-			  esp   => [ "Sun Enhanced SCSI Processor (ESP)", "ignore:esp" ],
-			  fas   => [ "Sun Swift (ESP)", "ignore:esp" ],
-			  ptisp => [ "Performance Technologies ISP", "qlogicpti" ],
-			  isp   => [ "QLogic ISP", "qlogicpti" ],
-			 );
-my %sbus_table_audio =   (
-			  audio      => [ "AMD7930", "amd7930" ],
-			  CS4231     => [ "CS4231 APC DMA (SBUS)", "cs4231" ],
-			  CS4231_PCI => [ "CS4231 EB2 DMA (PCI)", "cs4231" ],
-			 );
-my %sbus_table_video =   (
-			  bwtwo         => [ "Sun|Monochrome (bwtwo)", "Server:SunMono" ],
-			  cgthree       => [ "Sun|Color3 (cgthree)", "Server:Sun" ],
-			  cgeight       => [ "Sun|CG8/RasterOps", "Server:Sun" ],
-			  cgtwelve      => [ "Sun|GS (cgtwelve)", "Server:Sun24" ],
-			  gt            => [ "Sun|Graphics Tower", "Server:Sun24" ],
-			  mgx           => [ "Sun|Quantum 3D MGXplus", "Server:Sun24" ],
-			  mgx_4M        => [ "Sun|Quantum 3D MGXplus with 4M VRAM", "Server:Sun24" ],
-			  cgsix         => [ "Sun|Unknown GX", "Server:Sun" ],
-			  cgsix_dbl     => [ "Sun|Double Width GX", "Server:Sun" ],
-			  cgsix_sgl     => [ "Sun|Single Width GX", "Server:Sun" ],
-			  cgsix_t1M     => [ "Sun|Turbo GX with 1M VSIMM", "Server:Sun" ],
-			  cgsix_tp      => [ "Sun|Turbo GX Plus", "Server:Sun" ],
-			  cgsix_t       => [ "Sun|Turbo GX", "Server:Sun" ],
-			  cgfourteen    => [ "Sun|SX", "Server:Sun24" ],
-			  cgfourteen_4M => [ "Sun|SX with 4M VSIMM", "Server:Sun24" ],
-			  cgfourteen_8M => [ "Sun|SX with 8M VSIMM", "Server:Sun24" ],
-			  leo           => [ "Sun|ZX or Turbo ZX", "Server:Sun24" ],
-			  leo_t         => [ "Sun|Turbo ZX", "Server:Sun24" ],
-			  tcx           => [ "Sun|TCX (S24)", "Server:Sun24" ],
-			  tcx_8b        => [ "Sun|TCX (8bit)", "Server:Sun" ],
-			  afb           => [ "Sun|Elite3D", "Server:Sun24" ],
-			  afb_btx03     => [ "Sun|Elite3D-M6 Horizontal", "Server:Sun24" ],
-			  ffb           => [ "Sun|FFB", "Server:Sun24" ],
-			  ffb_btx08     => [ "Sun|FFB 67Mhz Creator", "Server:Sun24" ],
-			  ffb_btx0b     => [ "Sun|FFB 67Mhz Creator 3D", "Server:Sun24" ],
-			  ffb_btx1b     => [ "Sun|FFB 75Mhz Creator 3D", "Server:Sun24" ],
-			  ffb_btx20     => [ "Sun|FFB2 Vertical Creator", "Server:Sun24" ],
-			  ffb_btx28     => [ "Sun|FFB2 Vertical Creator", "Server:Sun24" ],
-			  ffb_btx23     => [ "Sun|FFB2 Vertical Creator 3D", "Server:Sun24" ],
-			  ffb_btx2b     => [ "Sun|FFB2 Vertical Creator 3D", "Server:Sun24" ],
-			  ffb_btx30     => [ "Sun|FFB2+ Vertical Creator", "Server:Sun24" ],
-			  ffb_btx33     => [ "Sun|FFB2+ Vertical Creator 3D", "Server:Sun24" ],
-			  ffb_btx40     => [ "Sun|FFB2 Horizontal Creator", "Server:Sun24" ],
-			  ffb_btx48     => [ "Sun|FFB2 Horizontal Creator", "Server:Sun24" ],
-			  ffb_btx43     => [ "Sun|FFB2 Horizontal Creator 3D", "Server:Sun24" ],
-			  ffb_btx4b     => [ "Sun|FFB2 Horizontal Creator 3D", "Server:Sun24" ],
-			 );
-
-1;
-
-sub prom_getint($) { unpack "I", c::prom_getproperty($_[0]) }
-
-#- update $@sbus_probed according to SBUS detection.
-sub prom_walk($$$$) {
-    my ($sbus_probed, $node, $sbus, $ebus) = @_;
-    my ($prob_name, $prob_type) = (c::prom_getstring("name"), c::prom_getstring("device_type"));
-    my ($nextnode, $nsbus, $nebus) = (undef, $sbus, $ebus);
-
-    #- probe for network devices.
-    if ($sbus && $prob_type eq 'network') {
-	$prob_name =~ s/[A-Z,]*(.*)/$1/;
-	$sbus_table_network{$prob_name} and push @$sbus_probed, [ "NETWORK", @{$sbus_table_network{$prob_name}} ];
-	#- TODO for Sun Quad Ethernet (qe)
-    }
-
-    #- probe for scsi devices.
-    if ($sbus && ($prob_type eq 'scsi' || $prob_name =~ /^(soc|socal)$/)) {
-	$prob_name =~ s/[A-Z,]*(.*)/$1/;
-	$sbus_table_scsi{$prob_name} and push @$sbus_probed, [ "SCSI", @{$sbus_table_scsi{$prob_name}} ];
-    }
-
-    #- probe for audio devices, there are no type to check here.
-    if ($sbus_table_audio{$prob_name}) {
-	$prob_name =~ /,/ and $prob_name =~ s/[A-Z,]*(.*)/$1/;
-	my $ext = $prob_name eq 'CS4231' && $ebus && "_PCI";
-	$sbus_table_audio{$prob_name . $ext} ?
-	    push @$sbus_probed, [ "AUDIO", @{$sbus_table_audio{$prob_name . $ext}} ] :
-	    push @$sbus_probed, [ "AUDIO", @{$sbus_table_audio{$prob_name}} ];
-    }
-
-    #- probe for video devices.
-    if ($prob_type eq 'display' && ($sbus || $prob_name =~ /^(ffb|afb|cgfourteen)$/)) {
-	$prob_name =~ s/[A-Z,]*(.*)/$1/;
-	my $ext = ($prob_name eq 'mgx' && prom_getint('fb_size') == 0x400000 && '_4M' ||
-		   $prob_name eq 'cgsix' && do {
-		       my ($chiprev, $vmsize) = (prom_getint('chiprev'), prom_getint('vmsize'));
-		       my $result = '';
-		       $chiprev >= 1 && $chiprev <= 4 and $result = '_dbl';
-		       $chiprev >= 5 && $chiprev <= 9 and $result = '_sgl';
-		       $chiprev == 11 && $vmsize == 2 and $result = '_t1M';
-		       $chiprev == 11 && $vmsize == 4 and $result = '_tp';
-		       $chiprev == 11 && !$result and $result = '_t';
-		       $result;
-		   } ||
-		   $prob_name eq 'leo' && c::prom_getstring('model') =~ /501-2503/ && '_t' ||
-		   $prob_name eq 'tcx' && c::prom_getbool('tcx-8-bit') && '_8b' ||
-		   $prob_name eq 'afb' && sprintf "_btx%x", prom_getint('board_type') ||
-		   $prob_name eq 'ffb' && sprintf "_btx%x", prom_getint('board_type'));
-
-	$sbus_table_video{$prob_name . $ext} ?
-	    push @$sbus_probed, [ "VIDEO", @{$sbus_table_video{$prob_name . $ext}} ] :
-	    push @$sbus_probed, [ "VIDEO", @{$sbus_table_video{$prob_name}} ];
-    }
-
-    #- parse prom tree.
-    $prob_name eq 'sbus' || $prob_name eq 'sbi' and $nsbus = 1;
-    $prob_name eq 'ebus' and $nebus = 1;
-    $nextnode = c::prom_getchild($node) and prom_walk($sbus_probed, $nextnode, $nsbus, $nebus);
-    $nextnode = c::prom_getsibling($node) and prom_walk($sbus_probed, $nextnode, $sbus, $ebus);
-}
-
-sub probe {
-    eval { modules::load("openprom") } if arch() =~ /sparc/;
-    my $root_node = c::prom_open();
-    my @l;
-
-    prom_walk(\@l, $root_node, 0, 0);
-    c::prom_close();
-    map { my %l; @l{qw(type description drivers)} = @$_ } @l;
-}
diff --git a/perl-install/scanner.pm b/perl-install/scanner.pm
deleted file mode 100755
index 90df5f6f6..000000000
--- a/perl-install/scanner.pm
+++ /dev/null
@@ -1,210 +0,0 @@
-#!/usr/bin/perl
-
-# scanner.pm $Id$
-# Yves Duret <yduret at mandrakesoft.com>
-# Copyright (C) 2001 MandrakeSoft
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# pbs/TODO:
-# - no scsi support
-# - devfs use dev_is_devfs()
-# - with 2 scanners same manufacturer -> will overwrite previous conf -> only 1 conf !!
-# - lp: see printerdrake
-# - install: prefix --> done
-
-package scanner;
-use lib qw(/usr/lib/libDrakX);
-use standalone;
-use common;
-use detect_devices;
-
-
-my $_sanedir = "$prefix/etc/sane.d";
-my $_scannerDBdir = "$prefix$ENV{SHARE_PATH}/ldetect-lst";
-$scannerDB = readScannerDB("$_scannerDBdir/ScannerDB");
-
-sub confScanner {
-    my ($model, $port) = @_;
-    $port = detect_devices::dev_is_devfs() ? "$prefix/dev/usb/scanner0" : "$prefix/dev/scanner" if (!$port);
-    my $a = $scannerDB->{$model}{server};
-    output("$_sanedir/$a.conf", (join "\n",@{$scannerDB->{$model}{lines}}));
-    substInFile {s/\$DEVICE/$port/} "$_sanedir/$a.conf";
-    add2dll($a);
-}
-
-sub add2dll {
-    return if member($_[0], chomp_(cat_("$_sanedir/dll.conf")));
-    local *F;
-    open F, ">>$_sanedir/dll.conf" or die "can't write SANE config in $_sanedir/dll.conf: $!";
-    print F $_[0];
-    close F;
-}
-
-sub findScannerUsbport {
-    my ($i, $elem, @res) = (0, {});
-    foreach (grep { $_->{driver} =~ /scanner/ } detect_devices::usb_probe()) {
-	#my ($manufacturer, $model) = split '\|', $_->{description};
-	#$_->{description} =~ s/Hewlett[-\s_]Packard/HP/;
-	push @res, { port => "/dev/usb/scanner$i", val => { #CLASS => 'SCANNER',
-							    #MODEL => $model,
-							    #MANUFACTURER => $manufacturer,
-							    DESCRIPTION => $_->{description},
-							    #id => $_->{id},
-							    #vendor => $_->{vendor},
-							  }};
-	++$i;
-    }
-    @res;
-}
-
-sub readScannerDB {
-    my ($file) = @_;
-    my ($card, %cards);
-
-    my $F = common::openFileMaybeCompressed($file);
-
-    my ($lineno, $cmd, $val) = 0;
-    my $fs = {
-        LINE => sub { push @{$card->{lines}}, $val },
-	NAME => sub {
-	    $cards{$card->{type}} = $card if $card;
-	    $card = { type => $val };
-	},
-	SEE => sub {
-	    my $c = $cards{$val} or die "Error in database, invalid reference $val at line $lineno";
-
-	    push @{$card->{lines}}, @{$c->{lines} || []};
-	    add2hash($card->{flags}, $c->{flags});
-	    add2hash($card, $c);
-	},
-	SERVER => sub { $card->{server} = $val; },
-	DRIVER => sub { $card->{driver} = $val; },
-	UNSUPPORTED => sub { $card->{flags}{unsupported} = 1 },
-	COMMENT => sub {},
-    };
-
-    local $_;
-    while (<$F>) { $lineno++;
-	s/\s+$//;
-	/^#/ and next;
-	/^$/ and next;
-	/^END/ and do { $cards{$card->{type}} = $card if $card; last };
-	($cmd, $val) = /(\S+)\s*(.*)/ or next; #log::l("bad line $lineno ($_)"), next;
-	my $f = $fs->{$cmd};
-	$f ? $f->() : log::l("unknown line $lineno ($_)");
-    }
-    \%cards;
-}
-
-sub updateScannerDBfromUsbtable {
-    substInFile {s/END//} "ScannerDB";
-    local *F;
-    open F, ">>ScannerDB" or die "can't write ScannerDB config in ScannerDB: $!";
-    print F "# generated from usbtable by scannerdrake\n";
-    foreach (cat_("$ENV{SHARE_PATH}/ldetect-lst/usbtable")) {
-	my ($vendor_id, $product_id, $mod, $name) = chomp_(split /\s/,$_,4);
-	next unless ($mod eq "\"scanner\"");
-	$name =~ s/\"(.*)\"$/$1/;
-	if (member($name, keys %$scanner::scannerDB)) {
-	    print "$name already in ScannerDB\n";
-	    next;
-	}
-	print F "NAME $name\nDRIVER usb\nCOMMENT usb $vendor_id $product_id\nUNSUPPORTED\n\n";
-    }
-    print F "END\n";
-    close F;
-}
-
-sub updateScannerDBfromSane {
-    my ($_sanesrcdir) = @_;
-    substInFile {s/END//} "ScannerDB";
-
-    local *Y;
-    open Y, ">>ScannerDB" or die "can't write ScannerDB config in ScannerDB: $!";
-    print Y "# generated from Sane by scannerdrake\n";
-    # for compat with our usbtable
-    my $sane2DB = { 
-		   "Acer" => "Acer Peripherals Inc.",
-		   "AGFA" => "AGFA-Gevaert NV",
-		   "Agfa" => "AGFA-Gevaert NV",
-		   "Epson" => "Seiko Epson Corp.",
-		   "Fujitsu Computer Products of America" => "Fujitsu",
-		   "HP" => sub {$_[0] =~ s/HP\s/Hewlett-Packard|/; $_[0] =~ s/HP4200/Hewlett-Packard|ScanJet 4200C/; $_[0];},
-		   "Hewlett-Packard" => sub {$_[0] =~ s/HP 3200 C/Hewlett-Packard|ScanJet 3200C/; $_[0];},
-		   "Kodak" => "Kodak Co.",
-		   "Mustek" => "Mustek Systems Inc.",
-		   "NEC" => "NEC Systems",
-		   "Nikon" => "Nikon Corp.",
-		   "Plustek" => "Plustek, Inc.",
-		   "Primax" => "Primax Electronics",
-		   "Siemens" => "Siemens Information and Communication Products",
-		   "Trust" => "Trust Technologies",
-		   "UMAX" => "Umax",
-		   "Vobis/Highscreen" => "Vobis",
-		  };
-    
-    opendir YREP, $_sanesrcdir or die "can't open $_sanesrcdir: $!";
-    @files = grep /.*desc$/, readdir YREP;
-    closedir YREP;
-    foreach $i (@files) {
-	my $F = common::openFileMaybeCompressed("$_sanesrcdir/$i");
-	print Y "\n# from $i";
-	my ($lineno, $cmd, $val) = 0;
-	my ($name, $intf, $comment,$mfg);
-	my $fs = {
-		  backend => sub {$backend = $val;},
-		  mfg => sub {$mfg = $val; $name=undef;},#bug when a new mfg comes. should called $fs->{$name}(); but ??
-		  model => sub {
-		      unless ($name) {$name = $val; next;}
-		      $name = (member($mfg, keys %$sane2DB))
-			? (ref $sane2DB->{$mfg}) ? $sane2DB->{$mfg}($name) : "$sane2DB->{$mfg}|$name" : "$mfg|$name";
-		      if (member($name, keys %$scanner::scannerDB)) {
-			  print "#![$name] already in ScannerDB !\n";
-		      } else {
-			  print Y "\nNAME $name\nSERVER $backend\nDRIVER $intf\n";
-			  print Y "COMMENT $comment\n" if ($comment);
-			  $comment = undef; 
-		      }
-		      #print "#-----------------------------------------------------------------------------\n";
-		      $name = $val;
-		  },
-		  interface => sub {$intf = $val;},
-		  comment => sub {$comment = $val;},
-		 };
-	local $_;
-	while (<$F>) { $lineno++;
-		       s/\s+$//;
-		       /^\;/ and next;
-		       ($cmd, $val) = /:(\S+)\s*\"([^\;]*)\"/ or next; #log::l("bad line $lineno ($_)"), next;
-		       my $f = $fs->{$cmd};
-		       $f ? $f->() : log::l("unknown line $lineno ($_)");
-		   }
-	$fs->{model}(); # the last one
-    }
-    print Y "\nEND\n";
-    close Y;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
-
-#-----------------------------------------------
-# $Log$
-# Revision 1.3  2001/11/12 15:18:02  yduret
-# update, sync with cvs
-#
diff --git a/perl-install/services.pm b/perl-install/services.pm
deleted file mode 100644
index a578c6c45..000000000
--- a/perl-install/services.pm
+++ /dev/null
@@ -1,298 +0,0 @@
-package services; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use run_program;
-use my_gtk qw(:helpers :wrappers);
-
-sub description {
-    my %services = (
-alsa => __("Launch the ALSA (Advanced Linux Sound Architecture) sound system"),
-anacron => __("Anacron a periodic command scheduler."),
-apmd => __("apmd is used for monitoring batery status and logging it via syslog.
-It can also be used for shutting down the machine when the battery is low."),
-atd => __("Runs commands scheduled by the at command at the time specified when
-at was run, and runs batch commands when the load average is low enough."),
-crond => __("cron is a standard UNIX program that runs user-specified programs
-at periodic scheduled times. vixie cron adds a number of features to the basic
-UNIX cron, including better security and more powerful configuration options."),
-gpm => __("GPM adds mouse support to text-based Linux applications such the
-Midnight Commander. It also allows mouse-based console cut-and-paste operations,
-and includes support for pop-up menus on the console."),
-harddrake => __("HardDrake runs a hardware probe, and optionally configures
-new/changed hardware."),
-httpd => __("Apache is a World Wide Web server.  It is used to serve HTML files
-and CGI."),
-inet => __("The internet superserver daemon (commonly called inetd) starts a
-variety of other internet services as needed. It is responsible for starting
-many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables
-all of the services it is responsible for."),
-ipchains => __("Launch packet filtering for Linux kernel 2.2 series, to set
-up a firewall to protect your machine from network attacks."),
-keytable => __("This package loads the selected keyboard map as set in
-/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.
-You should leave this enabled for most machines."),
-kheader => __("Automatic regeneration of kernel header in /boot for
-/usr/include/linux/{autoconf,version}.h"),
-kudzu => __("Automatic detection and configuration of hardware at boot."),
-linuxconf => __("Linuxconf will sometimes arrange to perform various tasks
-at boot-time to maintain the system configuration."),
-lpd => __("lpd is the print daemon required for lpr to work properly. It is
-basically a server that arbitrates print jobs to printer(s)."),
-lvs => __("Linux Virtual Server, used to build a high-performance and highly
-available server."),
-named => __("named (BIND) is a Domain Name Server (DNS) that is used to resolve
-host names to IP addresses."),
-netfs => __("Mounts and unmounts all Network File System (NFS), SMB (Lan
-Manager/Windows), and NCP (NetWare) mount points."),
-network => __("Activates/Deactivates all network interfaces configured to start
-at boot time."),
-nfs => __("NFS is a popular protocol for file sharing across TCP/IP networks.
-This service provides NFS server functionality, which is configured via the
-/etc/exports file."),
-nfslock => __("NFS is a popular protocol for file sharing across TCP/IP
-networks. This service provides NFS file locking functionality."),
-numlock => __("Automatically switch on numlock key locker under console
-and XFree at boot."),
-oki4daemon => __("Support the OKI 4w and compatible winprinters."),
-pcmcia => __("PCMCIA support is usually to support things like ethernet and
-modems in laptops.  It won't get started unless configured so it is safe to have
-it installed on machines that don't need it."),
-portmap => __("The portmapper manages RPC connections, which are used by
-protocols such as NFS and NIS. The portmap server must be running on machines
-which act as servers for protocols which make use of the RPC mechanism."),
-postfix => __("Postfix is a Mail Transport Agent, which is the program that
-moves mail from one machine to another."),
-random => __("Saves and restores system entropy pool for higher quality random
-number generation."),
-rawdevices => __("Assign raw devices to block devices (such as hard drive
-partitions), for the use of applications such as Oracle"),
-routed => __("The routed daemon allows for automatic IP router table updated via
-the RIP protocol. While RIP is widely used on small networks, more complex
-routing protocols are needed for complex networks."),
-rstatd => __("The rstat protocol allows users on a network to retrieve
-performance metrics for any machine on that network."),
-rusersd => __("The rusers protocol allows users on a network to identify who is
-logged in on other responding machines."),
-rwhod => __("The rwho protocol lets remote users get a list of all of the users
-logged into a machine running the rwho daemon (similiar to finger)."),
-sound => __("Launch the sound system on your machine"),
-syslog => __("Syslog is the facility by which many daemons use to log messages
-to various system log files.  It is a good idea to always run syslog."),
-usb => __("Load the drivers for your usb devices."),
-xfs => __("Starts the X Font Server (this is mandatory for XFree to run)."),
-    );
-    my ($name, $prefix) = @_;
-    my $s = $services{$name};
-    if ($s) {
-	$s = translate($s);
-    } else {
-	$s = -e "$prefix/etc/rc.d/init.d/$name" && cat_("$prefix/etc/rc.d/init.d/$name");
-	$s ||= -e "$prefix/etc/init.d/$name" && cat_("$prefix/etc/init.d/$name");
-	$s ||= -e "$prefix/etc/xinetd.d/$name" && cat_("$prefix/etc/xinetd.d/$name");
-	$s =~ s/\\\s*\n#\s*//mg;
-	if ($s =~ /^# description:\s+\S/sm) {
-	    ($s) = $s =~ /^# description:\s+(.*?)^(?:[^#]|# {0,2}\S)/sm;
-	} else {
-	    ($s) = $s =~ /^#\s*(.*?)^[^#]/sm;
-	}
-	$s =~ s/#\s*//mg;
-    }
-    $s =~ s/\n/ /gm; $s =~ s/\s+$//;
-    $s;
-}
-
-sub ask_install_simple {
-    my ($in, $prefix) = @_;
-    my ($l, $on_services) = services($prefix);
-    $in->ask_many_from_list("drakxservices",
-			    _("Choose which services should be automatically started at boot time"),
-			    {
-			     list => $l,
-			     help => sub { description($_[0], $prefix) },
-			     values => $on_services,
-			     sort => 1,
-			    });
-}
-
-sub ask_install {
-    my ($in, $prefix) = @_;
-    my %root_services = (
-			 _("Printing") => [ qw(cups cupslpd lpr lpd oki4daemon hpoj apcupsd cups-lpd ) ],
-			 _("Internet") => [ qw(httpd boa tux roxen ftp pftp tftp proftpd wu-ftpd pure-ftpdipsec proftpd-xinetd
-                                               ipchains iptables ipvsadm isdn4linux ibod jabber jabber-icq adsl squid
-                                               portsentry prelude nessusd junkbuster radvd cddbp ippl iptoip jail.init ) ],
-			 _("File sharing") => [ qw(nfs nfslock smb nettalk netfs mcserv autofs amd
-                                                   venus.init auth2.init codasrv.init update.init swat ) ],
-			 _("System") => [ qw(usb usbd pcmcia irda xinetd inetd kudzu harddrake apmd sound network xfs
-                                             alsa functions halt kheader killall mandrake_everytime mandrake_firstime
-                                             random rawdevices single keytable syslog crond medusa-init portmap acon
-                                             anacron atd gpm psacct wine acpid numlock jserver sensors mosix bpowerd bpowerfail
-                                             fcron powertweak.init ups syslog-ng cvs) ],
-			 _("Remote Administration") => [ qw(sshd telnetd telnet rsh rlogin rexec webmin cfd heartbeat ldirectord
-                                                            iplog mon vncserver netsaint olympusd drakxtools_http ) ],
-#			 _("Network Client") => [ qw(ypbind nscd arpwatch fetchmail dnrd_rc diald rsync ) ],
-#			 _("Network Server") => [ qw(named bootparamd ntpd xntpd chronyd postfix sendmail
-#                                                     imap imaps ipop2 ipop3 pop3s routed yppasswdd ypserv ldap dhcpd dhcrelay
-#                                                     hylafax innd identd rstatd rusersd rwalld rwhod gated
-#                                                     kadmin kprop krb524 krb5kdc krb5server hldsld bayonne sockd dhsd gnu-pop3d
-#                                                     gdips pptpd.conf vrrpd crossfire bnetd pvmd ircd sympa finger ntalk talk) ],
-			 _("Database Server") => [ qw(mysql postgresql) ],
-			);
-    my %services_root;
-    foreach my $root (keys %root_services) {
-	$services_root{$_} = $root foreach @{$root_services{$root}};
-    }
-    my ($l, $on_services) = services($prefix);
-    my %services;
-    $services{$_} = 0 foreach @{$l || []};
-    $services{$_} = 1 foreach @{$on_services || []};
-
-    $in->ask_browse_tree_info('drakxservices', _("Choose which services should be automatically started at boot time"),
-			      {
-			       node_state => sub { $services{$_[0]} ? 'selected' : 'unselected' },
-			       build_tree => sub {
-				   my ($add_node, $flat) = @_;
-				   $add_node->($_, !$flat && ($services_root{$_} || _("Other")))
-				     foreach sort keys %services;
-			       },
-			       grep_unselected => sub { grep { !$services{$_} } @_ },
-			       toggle_nodes => sub {
-				   my ($set_state, @nodes) = @_;
-				   my $new_state = !$services{$nodes[0]};
-				   foreach (@nodes) {
-				       $set_state->($_, $new_state ? 'selected' : 'unselected');
-				       $services{$_} = $new_state;
-				   }
-			       },
-			       get_status => sub {
-				   _("Services: %d activated for %d registered", 
-				     scalar(grep { $_ } values %services),
-				     scalar(values %services));
-			       },
-			       get_info => sub { formatLines(description($_[0], $prefix)) },
-			      }) or return ($l, $on_services); #- no change on cancel.
-    ($l, [ grep { $services{$_} } @$l ]);
-}
-
-sub ask_standalone_gtk {
-    my ($in, $prefix) = @_;
-    my ($l, $on_services) = services($prefix);
-    my $W = my_gtk->new(_("Services"));
-    my ($x, $y, $w_popup);
-    my $nopop = sub { $w_popup and $w_popup->destroy };
-    my $display = sub { $nopop->(); $_[0] and gtkmove(gtkshow(gtkadd($w_popup=new Gtk::Window (-popup),
-        				       gtksignal_connect(gtkadd(new Gtk::EventBox(),
-        				           gtkadd(gtkset_shadow_type(new Gtk::Frame, 'etched_out'),
-        					   gtkset_justify(new Gtk::Label($_[0]), 0))),
-        					   button_press_event => sub { $nopop->() }
-		      ))), $x, $y) };
-    my $update_service = sub {
-		my $started = -e "/var/lock/subsys/$_[0]";
-                my $action = $started ? "stop" : "start";
-                $_[1]->set($started ? _("running") : _("stopped"));
-                $started, $action;
-    };
-    my $strip = sub {
-                my $infos_old = $_[0];
-                my $infos;
-		while ($infos_old =~ s/(.{40})//) {
-                    $1 =~ /(.*) ([^ ]*)/;
-		    $infos .= "$1\n$2";
-                }
-                $infos .= $infos_old;
-    };
-    my $b = new Gtk::EventBox();
-    $b->set_events(["pointer_motion_mask"]);
-    gtkadd($W->{window}, gtkadd($b, gtkpack_($W->create_box_with_title(_("Services and deamons")),
-	1, gtkset_usize(createScrolledWindow(create_packtable({ col_spacings => 10, row_spacings => 3 },
-	    map {
-                my $service = $_;
-        	my $infos = $strip->(description($_, $prefix));
-                $infos ||= _("No additional information\nabout this service, sorry.");
-		my $l = new Gtk::Label();
-                my ($started, $action) = $update_service->($service, gtkset_justify($l, 0));
-		[ gtkpack__(new Gtk::HBox(0,0), $_),
-		  gtkpack__(new Gtk::HBox(0,0), $l),
-		  gtkpack__(new Gtk::HBox(0,0), gtksignal_connect(new Gtk::Button(_("Infos")), clicked => sub { $display->($infos) })),
-                  gtkpack__(new Gtk::HBox(0,0), gtkset_active(gtksignal_connect(
-                          new Gtk::CheckButton(_("On boot")),
-                          clicked => sub { if ($_[0]->active) {
-                                               "@$on_services" =~ /$service/ or push(@$on_services,$service)
-                                           } else {
-                                               @$on_services = grep(!/$service/, @$on_services)
-                                        }}), "@$on_services" =~ /$service/ )),
-		  map { my $a = $_;
-                      gtkpack__(new Gtk::HBox(0,0), gtksignal_connect(new Gtk::Button(_($a)),
-                          clicked => sub { my $c = "service $service " . (lc($a) eq "start" ? "restart" : lc($a)) . " 2>&1"; local $_=`$c`; s/\033\[[^mG]*[mG]//g;
-                                           ($started, $action) = $update_service->($service, $l);
-                                           $display->($_);
-                                         }
-                      )) } (_("Start"), _("Stop"))
-		]
-	    }
-            @$l)), 500, 400),
-            0, gtkpack(gtkset_border_width(new Gtk::HBox(0,0),5), $W->create_okcancel)
-            ))
-	  );
-    $b->signal_connect( motion_notify_event => sub { my ($w, $e) = @_;
-                                                               my ($ox, $oy) = $w->window->get_deskrelative_origin;
-                                                               $x = $e->{'x'}+$ox; $y = $e->{'y'}+$oy; });
-    $b->signal_connect( button_press_event => sub { $nopop->()});
-    $::isEmbedded and Gtk->main_iteration while Gtk->events_pending;
-    $::isEmbedded and kill (12, $::CCPID);
-    $W->main or return;
-    ($l, $on_services);
-}
-
-sub ask {    
-    my ($in, $prefix) = @_;
-    !$::isInstall && $in->isa('interactive_gtk') ? &ask_standalone_gtk : &ask_install;
-}
-
-sub doit {
-    my ($in, $on_services, $prefix) = @_;
-    my ($l, $was_on_services) = services($prefix);
-
-    foreach (@$l) {
-	my $before = member($_, @$was_on_services);
-	my $after = member($_, @$on_services);
-	if ($before != $after) {
-	    my $script = "/etc/rc.d/init.d/$_";
-	    run_program::rooted($prefix, "chkconfig", $after ? "--add" : "--del", $_);
-	    if ($after && cat_("$prefix$script") =~ /^#\s+chkconfig:\s+-/m) {
-		run_program::rooted($prefix, "chkconfig", "--level", "35", $_, "on");
-	    }
-	    if (!$after && $::isStandalone) {
-		run_program::rooted($prefix, $script, "stop");
-	    }
-	}
-    }
-}
-
-#- returns: 
-#--- the listref of installed services
-#--- the listref of "on" services
-sub services {
-    my ($prefix) = @_;
-    my $cmd = $prefix && !$::testing ? "chroot $prefix" : "";
-    my @l = map { [ /([^\s:]+)/, /\bon\b/ ] } grep { !/:$/ } sort `LANGUAGE=C $cmd /sbin/chkconfig --list`;
-    [ map { $_->[0] } @l ], [ map { $_->[0] } grep { $_->[1] } @l ];
-}
-
-sub mapgrep(&@) {
-    my $f = shift;
-    my @l;
-    foreach (@_) {
-	my ($b, $v) = $f->($_);
-	push @l, $v if $b;
-    }
-    @l;
-}
-
-1;
diff --git a/perl-install/share/.cvsignore b/perl-install/share/.cvsignore
deleted file mode 100644
index 4173dc671..000000000
--- a/perl-install/share/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-locales.tar.bz2
-locales-*-drakx.tar.bz2
diff --git a/perl-install/share/Makefile b/perl-install/share/Makefile
deleted file mode 100644
index 00e5afcc3..000000000
--- a/perl-install/share/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-all: locales.tar.bz2
-
-# /usr/lib/libc.a to depend on the current glibc
-locales.tar.bz2: locales-skeleton.tar.bz2 gen_locales.sh /usr/lib/libc.a
-	./gen_locales.sh
diff --git a/perl-install/share/aliases b/perl-install/share/aliases
deleted file mode 100644
index d3807605a..000000000
--- a/perl-install/share/aliases
+++ /dev/null
@@ -1,7 +0,0 @@
-raidstop raidstart
-gunzip gzip
-install2 perl-install/install2
-commands perl-install/commands
-runinstall2 install2
-fsck.ext2 e2fsck
-rmmod insmod_
diff --git a/perl-install/share/compssList b/perl-install/share/compssList
deleted file mode 100644
index 36b0f4a44..000000000
--- a/perl-install/share/compssList
+++ /dev/null
@@ -1,1665 +0,0 @@
-	                               normal server developer
-
-AVLTree-devel                                  0     0     0
-AfterStep                                     22     0    53
-AfterStep-APPS                                22     0    35  
-Apache-ASP                                   -99     0   -99
-ApacheJServ                                  -99     0   -99
-Apple-StyleWriter-printer-driver__lpstyl       0     0     0
-Aurora					      81    -1    -1
-BasiliskII                                    35     0    10
-BasiliskII-sheepnet                           33     0     8
-BitchX                                        43     0    15
-C++2LaTeX                                      0     0    30
-Canon-CaPSL-printer-driver__cjet               0     0     0
-ClanLib                                       32     0    32
-ClanLib-devel				       0     0    25
-ClanLib-docs				       0     0    25
-ClanLib-gl				       0     0     0
-ClanLib-magick				       0     0     0
-ClanLib-mikmod				       0     0     0
-ClanLib-png                                    0     0     0
-Device3Dfx                                    -1    -1    -1
-DrakConf                                      84    84    84
-drakprofile                                   50     0    50
-draksync                                      50     0    50
-DrakeLogo                                     20     0     0
-ElectricFence                                 10     0    66
-Epplets                                       57     0    53
-Eterm                                         57     0    53
-Eterm-devel                                    0     0     0
-FaxMail                                       30     0     0
-FileRunner                                    45     0    25
-FreeWnn                                      -20   -20   -20
-FreeWnn-devel                                -70   -60   -40
-GConf                                          0     0     0
-GConf-devel                                    0     0    40
-GXedit                                        40     0    55
-Glide_V2                                      -1    -1    -1
-Glide_V2-devel                                -1    -1    -1
-Glide_V3                                      -1    -1    -1
-Glide_V3-DRI                                  -1    -1    -1
-Glide_V3-DRI-devel                            -1    -1    -1
-Glide_V3-devel                                -1    -1    -1
-Glide_V5                                      -1    -1    -1
-Glide_V5-devel                                -1    -1    -1
-HTML-Embperl                                   0    40    40
-Hermes                                        32     0    42
-Hermes-devel                                   0     0    35
-ImageMagick                                   56     5    60
-ImageMagick-devel                             10     0    60
-ImageMagick-lib                                0     0     0
-MAKEDEV                                       91    91    91
-MandrakeUpdate                                82     0    80
-Mesa                                          30     0    70
-Mesa-common                                   30     0    70
-Mesa-common-devel                              0     0    70
-Mesa-demos                                    10     0    15
-MySQL                                          2    55    15
-MySQL-bench                                    2    50    10
-MySQL-client                                   2    52    11
-MySQL-devel                                    0     0    15
-MySQL-shared                                   2    50    10
-ORBit                                          0     0    55
-ORBit-devel                                   10     0    55
-SDL                                           50     0    25
-SDL-devel                                      0     0    25
-SDL_image                                      0     0    25
-SDL_image-devel                                0     0    25
-SDL_mixer				       0     0    25
-SDL_mixer-devel				       0     0    25
-SDL_net					       0     0    25
-SDL_net-devel				       0     0    25
-SDL_ttf					       0     0    25
-SDL_ttf-devel                                  0     0    25
-SVGATextMode                                   0     0     0
-SmallEiffel                                    0     0    30
-SysVinit                                      15    52    45
-TiMidity++                                    51     0    54
-WMRack                                        40     0    32
-WindowMaker                                   40     0    57
-WindowMaker-devel                              0     0    30
-WsLib-devel                                    0     0     0
-X11R6-contrib                                 55     0    47
-XFree86                                       91     0    81
-XFree86-100dpi-fonts                          56     0    30
-XFree86-3DLabs                               -30   -30   -30
-XFree86-75dpi-fonts                           91     0    81
-XFree86-8514                                 -30   -30   -30
-XFree86-AGX                                  -30   -30   -30
-XFree86-FBDev                                -30   -30   -30
-XFree86-I128                                 -30   -30   -30
-XFree86-ISO8859-2                            -20   -30   -20
-XFree86-ISO8859-2-100dpi-fonts               -20   -30   -20
-XFree86-ISO8859-2-75dpi-fonts                -20   -30   -20
-XFree86-ISO8859-2-Type1-fonts                -20   -30   -20
-XFree86-ISO8859-9                            -20   -30   -20
-XFree86-ISO8859-9-100dpi-fonts               -20   -30   -20
-XFree86-ISO8859-9-75dpi-fonts                -20   -30   -20
-XFree86-Mach32                               -30   -30   -30
-XFree86-Mach64                               -30   -30   -30
-XFree86-Mach8                                -30   -30   -30
-XFree86-Mono                                 -30   -30   -30
-XFree86-P9000                                -30   -30   -30
-XFree86-S3                                   -30   -30   -30
-XFree86-S3V                                  -30   -30   -30
-XFree86-SVGA                                 -30   -30   -30
-XFree86-VGA16                                -30   -30   -30
-XFree86-W32                                  -30   -30   -30
-XFree86-Xnest                                  0     0    55
-XFree86-Xvfb                                   0     0    15
-XFree86-cyrillic-fonts                       -20   -30   -20
-XFree86-devel                                 12     0    55
-XFree86-doc                                  -30   -30   -30
-XFree86-glide-module                          -2    -2    -2
-XFree86-libs                                  10     0     0
-XFree86-server                               -30   -30   -30
-XFree86-server-common                        -30   -30   -30
-XFree86-static-libs                            0     0    20
-XFree86-xfs                                    0     0     0
-XaoS                                          40     0    25
-XaoS-aalib                                     0     0     0
-XaoS-svgalib                                   0     0     0
-Xaw3d                                         20     0    70
-Xaw3d-devel                                   10     0    60
-Zope                                           0    15    30
-Zope-components                     	       0    15    30
-Zope-core				       0    15    30
-Zope-pcgi				       0    15    30
-Zope-services				       0    15    30
-Zope-zpublisher				       0    15    30
-Zope-zserver				       0    15    30
-Zope-ztemplates                                0    15    30
-aalib                                         25     0    15
-aalib-devel                                    0     0    25    
-abisuite                                      59     0    45
-acon                                         -10   -10   -10
-acpid                                          0     0     0
-adjtimex                                      22    35    87
-adns                                          30    30    30 
-adns-devel                                     0     0    30
-aktion                                        66     0    15
-alsa                                           0     0     0
-alsa-lib                                       0     0     0
-alsa-lib-devel                                 0     0    20
-alsa-source				       0     0     0
-alsa-utils				       0     0     0
-alsaplayer                                     0     0     0
-am-utils                                       0    25    19
-ami                                          -20   -20   -20
-ami-gnome                                    -20   -20   -20
-anacron                                       85    70    85
-anonftp                                        0    86    13
-apache                                       -99    80   -99
-apache-common                                -99     0   -99
-apache-devel                                 -99     0   -99
-apache-manual                                -99    40   -99
-apache-mod_perl                              -99    85   -99
-apache-mod_perl-devel                        -99     0   -99
-apache-suexec                                -99    75   -99
-apcupsd                                       -1    -1    -1
-apmd                                          -1    -1    -1
-apmd-devel                                    -1    -1    -1
-app-defaults-be                              -30   -30   -30
-app-defaults-cs                              -30   -30   -30
-app-defaults-ga                              -30   -30   -30
-app-defaults-ru                              -30   -30   -30
-app-defaults-th                              -30   -30   -30
-app-defaults-uk                              -30   -30   -30
-arpwatch                                       0    50     0
-ash                                           10    10    10
-aspell                                        49    15    22
-aspell-ca                                    -30   -30   -30
-aspell-cs                                    -30   -30   -30
-aspell-da                                    -30   -30   -30
-aspell-de                                    -30   -30   -30
-aspell-de_CH                                 -30   -30   -30
-aspell-devel                                   0     0    10
-aspell-en                                    -30   -30   -30
-aspell-en_CA                                 -30   -30   -30
-aspell-en_GB                                 -30   -30   -30
-aspell-eo                                    -30   -30   -30
-aspell-es                                    -30   -30   -30
-aspell-fr                                    -30   -30   -30
-aspell-it                                    -30   -30   -30
-aspell-nl                                    -30   -30   -30
-aspell-no                                    -30   -30   -30
-aspell-pl                                    -30   -30   -30
-aspell-sv                                    -30   -30   -30
-at                                            42    96    94
-aterm                                         17     0    13
-audiofile                                     25     0    26
-audiofile-devel                               10     0    26
-aumix                                         79     0    79
-auth_ldap                                      5    75    20
-autoconf                                      15     0    84
-autofs                                        48    45    50
-autoirpm                                     -60   -60   -60
-autologin                                     82     0    82
-automake                                      15     0    84
-awesfx                                        20     0    13
-basesystem                                     0     0     0
-bash                                           0     0     0
-bash-doc                                      35    50    71
-bash1                                         15     5    13
-bc                                            40    25    25
-bdflush                                        0     0     0
-bind                                           0    75     0
-bind-devel                                     0     0     0
-bind-utils                                    25    35    70
-binutils                                      47     0    87
-bison                                         10     0    80
-blackbox                                      30     0    45
-blt                                           10     0    75
-bluefish                                      60     0    60
-boa                                          -99   -99   -99
-bonnie                                         5    45    25
-bonobo                                        20     0    20
-bonobo-devel                                   0     0    35
-bootparamd                                    20    78     0
-bug-buddy                                      0     0    20
-byacc                                         16     0    80
-bzflag                                        -1    -1    -1
-bzip2                                         41    85    75
-caching-nameserver                             0    70     0
-cbb                                           55     0    13
-cdecl                                         10     0    70
-cdialog                                        3     0    20
-cdp                                           40     0    27
-cdparanoia                                    45     0    45
-cdparanoia-devel                               0     0    30
-cdrecord                                      45     0    45
-cdrecord-cdda2wav                             44     0    45
-cdrecord-devel                                10     0     0
-cervisia                                       0     0     0
-cfengine                                       0    30     0
-chkconfig                                      0    65    10
-chkfontpath                                    0     0    50
-chromium                                      -1    -1    -1
-clanbomber                                    65     0    25 
-cleanfeed                                     24    65    21
-clisp                                          0     0    15
-compat-glibc                                   0     0    40
-compat-libs                                    0     0     0
-comsat                                         0    30     2
-console-tools                                 97    97    97
-console-tools-devel                            0     0     0
-control-center                                69     0    10
-control-center-devel                           0     0     0
-control-panel                                  2     0     2
-cooledit                                       0     0    30
-corewars                                       0    15     0
-cpio                                          90    89    90
-cproto                                        15     0    61
-cracklib                                      10    85    35
-cracklib-devel                                 0     0    15
-cracklib-dicts                                10    82    35
-crontabs                                      95    95    95
-csmash                                        -1    -1    -1
-ctags                                         10     0    80
-cttex                                        -30   -30   -30
-cups                                         -99   -99   -99
-cups-devel                                     0     0    20
-cups-drivers                                 -99   -99   -99
-cvs                                           18    60    72
-cvsweb                                         0     0    30
-cxhextris                                     50     0    36
-detect                                        25    25    75 
-detect-devel                                   0     0    60
-detect-lst                                    25    25    75
-dev                                           99    99    99
-dev86                                          0     0    40
-dev86-devel                                    0     0    40
-devfsd                                         0     0     0
-dhcp                                         -99    80   -99
-dhcp-client                                    0    79     5
-dhcp-relay                                     0    10     0
-dhcpcd                                         0     0     0
-dhcpxd                                         0     0     0
-dia                                           30     0    30
-dialog                                        10     0    71
-diffstat                                      12    50    87
-diffutils                                     42    55    87
-dip                                           40    45    13
-docbook-dtd31-sgml                            30     0    45
-docbook-style-dsssl                            5    15    15
-docbook-style-dsssl-doc                        4    14    14
-dosemu                                        45     0    49
-dosemu-freedos                                45     0    49
-dosfstools                                    40    15    22
-doxygen                                        0     0    40
-dpsftp                                        45     0     0
-dpsftplib                                     45     0     0
-dpsftplib-devel                               45     0    15
-drakfloppy                                    84     0    84
-drakfont                                      84     0    84
-drakxtools                                    86    80    87
-dump                                          10    75    87
-e2fsprogs                                     98    98    98    
-e2fsprogs-devel                                0     0    25
-eMusic                                        65     0    50
-ed                                            45    10     5
-ee                                            58     0    54
-efax                                          25    78    30
-egcs                                           5     0    50
-egcs-c++                                       5     0    50
-egcs-cpp                                       5     0    50
-egcs-g77                                       5     0    50
-egcs-objc                                      5     0    50
-egcs-objc-devel                                4     0    20
-eggdrop                                       25     0    25
-eject                                         92    33    91
-elm                                           22     5    13
-emacs                                         49    45     0
-emacs-X11                                     51     0    69
-emacs-el                                       0     0    15
-emacs-leim                                    20     0    50
-emacs-nox                                     20     0    14
-emacs-pcomplete                               20     0    30
-emacs-tramp                                   20    20    30
-enlightenment                                 41     0    55
-enscript                                      20    25    71
-eog                                           30     0    20
-eperl                                          0     0    10
-eshell                                        20     0    30
-esound                                         0     0     0
-esound-devel                                  12     0     4
-etcskel                                       98    98    98
-ethemes                                       40     0    35
-exmh                                          40     0    36
-expect                                        23     0    71
-ext2ed                                         5    52    42
-ext2resize                                     5    52    42
-faces                                         20    75    15
-faces-devel                                   10     0     0
-faces-xface                                   20     0    15
-faq                                           63    49    53
-fbset                                         22     0     0
-fdutils                                       10     0     0
-fetchmail                                     45    99    31
-fetchmail-daemon                              20    30    20
-fetchmailconf                                 45     0    40
-file                                          92    92    94
-filesystem                                    99    99    99
-fileutils                                     99    99    99
-findutils                                     97    97    97
-finger                                        40    35    27
-finger-server                                  0    30     0
-flex                                          13     0    72
-fltk                                           0     0     0
-fltk-devel                                     0     0    15
-fmirror                                       45    35    40
-fnlib                                         10     0     7
-fnlib-devel                                   10     0     0
-fonts-ttf-armenian                           -10     0   -10
-fonts-ttf-big5                               -10     0   -10
-fonts-ttf-decoratives                         72     0    68
-fonts-ttf-gb2312                             -10     0   -10
-fonts-ttf-japanese                           -10     0   -10
-fonts-ttf-korean                             -10     0   -10
-fonts-ttf-west_european                       77     0    74
-fonts-type1-baltic                           -15   -15   -15
-fortune-mod                                   10     0    10
-freeciv                                       54     0    53
-freetype                                      10     0     4
-freetype-devel                                10     0     0
-fribidi                                        0     0     0
-fribidi-devel                                  0     0     0
-ftp                                           90    92    90
-fvwm                                          12     0    15
-fvwm2                                         17     0    17
-fvwm2-icons                                   17     0    17
-fwhois                                        25    45    36
-g-print                                       20     0    20
-g-wrap                                         0     0    40
-g-wrap-devel                                   0     0    20
-gaddr                                         45     0    40
-gaim                                          35     0    30
-gated                                          0    80     0
-gatos                                         55     0    49
-gawk                                          10    55    87
-gawk-doc                                      10    35    50
-gcc                                           50    40    90
-gcc-c++                                       15     0    74
-gcc-chill                                     20     0    65
-gcc-colorgcc                                   0     0     0
-gcc-cpp                                       47     0    72
-gcc-fr                                         0     0     0
-gcc-g77                                       15     0    27
-gcc-java                                      16     0    65
-gcc-libgcj                                    15     0    30
-gcc-objc                                      16     0    35
-gcombust                                      40     0     0
-gd                                            12     0    71
-gd-devel                                      10     0    71
-gd-utils                                      45     0    64
-gdb                                           12     0    94
-gdbm                                          12     0    72
-gdbm-devel                                    10     0    72
-gdk-pixbuf                                    68     0    70
-gdk-pixbuf-devel                               0     0    40
-gdm                                           67     0    55
-gedit                                         68     0    62
-gedit-devel                                    0     0     0
-genromfs                                      10     0     9
-gentoo                                        30     0     0
-gettext                                       10    15    71
-gettext-devel                                  0     0    35
-getty_ps                                      99    99    99
-gfcc                                          15     0    31
-gftp                                          67     0    62
-ggv                                           25     0     0
-ghc                                            0     0    35
-ghc-prof                                       0     0     2
-ghostscript                                   40    70    75
-ghostscript-utils                             30    50    55
-ghostscript-fonts                             22    55    75
-ghostscript-module-SVGALIB                    10     0    63
-ghostscript-module-X                          40    60    65
-gif2png                                       10     0    20
-giftrans                                      42     0    71
-gimp                                          69     0    67
-gimp-data-extras                              55     0    58
-gimp-devel                                    10     0    40
-gimp-libgimp                                  10     0    50
-gimp-perl                                     30     0    30
-git                                           69    35    54
-gkrellm                                       15    30    15
-gkrellm-devel                                  0     0    20
-glade                                         17     0    57
-glademm                                        0     0    40
-glib                                           1     0     0
-glib-devel                                    10     0    87
-glibc                                          1    99    96
-glibc-devel                                   25     0    76
-glibc-profile                                  1     0    54
-gltron                                        -1    -1    -1
-gmc                                           68     0    59
-gmp                                           17     0    71
-gmp-devel                                     10     0    71
-gnomba                                        24     0    24
-gnome-applets                                 68     0    55
-gnome-audio                                   60     0    55
-gnome-audio-extra                             55     0    50
-gnome-chess                                   60     0    55
-gnome-core                                    68     0    55
-gnome-core-devel                              10     0    55
-gnome-games                                   60     0    59
-gnome-games-devel                             10     0     0
-gnome-guile                                    0     0    50
-gnome-guile-devel                             10     0    50
-gnome-iconedit                                60     0    55
-gnome-libs                                    68     0    55
-gnome-libs-devel                              10     0    55
-gnome-linuxconf                               74     0    74
-gnome-media                                   60     0    58
-gnome-network                                 60     0    58
-gnome-objc                                     0     0    40
-gnome-objc-devel                              10     0    40
-gnome-pilot                                   55     0    45
-gnome-pilot-conduits                          45     0    35
-gnome-pilot-devel                              0    15     0
-gnome-pim                                     61     0    70
-gnome-pim-conduits                            51     0    60
-gnome-pim-devel                               10     0    70
-gnome-print                                   62     0    55
-gnome-print-devel                             10     0    55
-gnome-tiles                                   60     0    55
-gnome-toaster                                 65     0    61
-gnome-users-guide                             66     0    60
-gnome-utils                                   66     0    50
-gnome-vfs                                      0     0     0
-gnome-vfs-devel                                0     0    30
-gnomeicu                                      61     0    58
-gnomemm                                        0     0    40
-gnomemm-devel                                  0     0    30
-gnorpm                                        74     0    71
-gnozip                                        50     0    60
-gnucash                                       35     0    15
-gnucash-devel                                  0     0    12
-gnuchess                                      40     0    31
-gnumeric                                      67     0    58
-gnuplot                                       65     0    53
-gnus                                          20     0    14
-gob                                            0     0    20
-gperf                                         12     0    72
-gphoto                                        60     0    58
-gpm                                            0    65    87
-gpm-devel                                     10     0    55
-gprolog                                        5     5    45
-gps                                           30    15    30
-gqcam                                          0     0     0
-gqview                                        55     0    49
-grep                                           0    92    94
-grip                                          60     0    35
-groff                                          0     0    62
-groff-for-man                                  0     0     0
-groff-gxditview                               22     0    19
-groff-perl                                     0     0     0
-grpmi                                          0     0     0
-grub                                          99    99    99
-grub-doc                                       0     0    25
-gsl                                           10     0     0
-gsl-devel                                      0     0     0
-gsu                                           65     0    53
-gtk+                                           0     0    70
-gtk+-devel                                    10     0    70
-gtk+licq                                      45     0    30
-gtk+mdk                                        0     0    15
-gtk+mdk-devel                                  0     0    15
-gtk-engines                                    0     0    70
-gtk-themes                                    50     0    20
-gtkdialogs                                     0     0     0
-gtkeyboard                                    20     0     0
-gtkglarea                                     10     0    15
-gtkglarea-devel                                0     0    15
-gtkgo                                         15     0     5
-gtkgraph                                      65     0    35
-gtkhtml                                        0     0     0
-gtkhtml-devel                                  0     0     0
-gtkmm                                         20     0    55
-gtkmm-devel                                   20     0    55
-gtktalog        			      52     0    25
-gtkzip                                        60     0    58
-gtop                                          60     0    58
-gtulpas                                       10     0    10
-guile                                         11     0    75
-guile-devel                                   10     0    75
-gurpmi                                        82     0    86
-gv                                            55     0    49
-gzip                                          98    98    98
-hackkernel                                     0     0     0
-hackkernel-doc                                 0     0     0
-hackkernel-headers                             0     0     0
-hackkernel-pcmcia-cs                           0     0     0
-hackkernel-source                              0     0     0
-happy                                          0     0    25
-harddrake                                     83     0    83
-haskell-GTK                                    0     0    10
-haskell-GTK-devel                              0     0    10
-hdparm                                        98    98    98
-heartbeat                                     -1    25    -1
-hexedit                                       91    91    91
-howto-html-de				     -30   -30   -30
-howto-html-el				     -30   -30   -30
-howto-html-en				     -30   -30   -30
-howto-html-es				     -30   -30   -30
-howto-html-fr				     -30   -30   -30
-howto-html-hr				     -30   -30   -30
-howto-html-id				     -30   -30   -30
-howto-html-it                                -30   -30   -30
-howto-html-ja				     -30   -30   -30
-howto-html-ko				     -30   -30   -30
-howto-html-pl				     -30   -30   -30
-howto-html-ro				     -30   -30   -30
-howto-html-sl				     -30   -30   -30
-howto-html-sv				     -30   -30   -30
-howto-html-zh                                -30   -30   -30
-howto-utils                                    0     0     0
-hugs98                                         0     0    15
-hylafax                                        0     0     0
-hylafax-client                                 0     0     0
-hylafax-server                                 0     0     0
-ibtk                                          20     0    13
-ical                                          40     0    27
-icepref                                       50     0    54
-icewm                                         65     0    78
-icewm-light                                   90     0    80
-imap                                           0    80     6
-imap-devel                                     0     0     6
-imlib                                         10     0    71
-imlib-cfgeditor                               70     0    71
-imlib-devel                                   10     0    50
-imwheel                                       78    60    73
-indent                                        20     0    91
-indexhtml                                      0    87    76
-inews                                          6    12    15
-info                                          20    65    70 
-info-install                                   0     0    10
-initscripts                                   99    99    99
-inn                                            0    55     0
-inn-devel                                      0     0     0
-intimed                                        0    55    10
-ipchains                                      15    98    13
-iplog                                         15    15    15               
-iproute2                                       0    30     0
-ipvsadm                                        0    15     0
-ipxutils                                      20    85     9
-irda-utils                                    -1    -1    -1
-irssi                                         59     0    57
-isapnptools                                   43    73    73
-isapnptools-devel                              0     0    70
-isdn4k-utils                                 -99   -99   -99
-isdn4net                                     -99   -99   -99
-isicom                                        20     0    13
-ispell                                        49    15    22
-ispell-af                                    -15   -15   -15
-ispell-br                                    -15   -15   -15
-ispell-ca                                    -15   -15   -15
-ispell-cs                                    -15   -15   -15
-ispell-da                                    -15   -15   -15
-ispell-de                                    -15   -15   -15
-ispell-el                                    -15   -15   -15
-ispell-en                                    -15   -15   -15
-ispell-eo                                    -15   -15   -15
-ispell-es                                    -15   -15   -15
-ispell-fi                                    -15   -15   -15
-ispell-fr                                    -15   -15   -15
-ispell-ga                                    -15   -15   -15
-ispell-gd                                    -15   -15   -15
-ispell-gv                                    -15   -15   -15
-ispell-id                                    -15   -15   -15
-ispell-it                                    -15   -15   -15
-ispell-nl                                    -15   -15   -15
-ispell-no                                    -15   -15   -15
-ispell-pl                                    -15   -15   -15
-ispell-pt                                    -15   -15   -15
-ispell-pt_BR                                 -15   -15   -15
-ispell-ro                                    -15   -15   -15
-ispell-ru                                    -15   -15   -15
-ispell-sk                                    -15   -15   -15
-ispell-sl                                    -15   -15   -15
-ispell-sv                                    -15   -15   -15
-itcl                                          10     0    60
-jadetex                                       15     0    45
-jed                                           16    18    14
-jed-common                                     0    18     0
-jed-xjed                                      40     0    22
-jikes                                          1     0    65
-joe                                           20    20    15
-kaffe                                         10     0    60
-kdbg                                          15     0    27
-kde1-compat                                    0     0     0
-kde1-compat-devel                              0     0     0
-kdeaddutils                                   73     0    62
-kdeaddutils-devel                              1     1    50
-kdeadmin                                      72     0    60
-kdebase                                       79    40    68
-kdebase-devel                                  1     1    60
-kdegames                                      71     0    59
-kdegraphics                                   77    40    66
-kdegraphics-devel                              1     1    60
-kdelibs                                        0     0     0
-kdelibs-devel                                  1     1    60
-kdelibs-sound                                 60     0    55
-kdelibs-sound-devel                            1     1    60
-kdemultimedia                                 77     0    66
-kdemultimedia-devel                            1     1    60
-kdenetwork                                    72     0    60
-kdenetwork-devel                               1     1    60
-kdepim                                        72     0    63
-kdesdk                                         0     0    35
-kdesupport                                     0     0     0
-kdesupport-devel                               0     0    15
-kdetoys                                       70     0    65
-kdeutils                                      78     0    67
-kdiff                                          0     0     0
-kdiskcat                                       0     0     0
-kdoc                                           0     0    35
-kernel                                        99    99    99
-kernel-doc                                     5    50    65
-kernel-headers                                 1    45    94
-kernel-linus                                  -1    -1    -1
-kernel-pcmcia-cs                              -1    -1    -1
-kernel-secure                                  0     0     0
-kernel-smp                                    -1    -1    -1
-kernel-source                                  0    45    65
-kernel-utils                                   0     5    25
-kfilecoder                                     0     0     0
-kfirewall                                      0     0     0
-kfortune                                       0     0     0
-kfsstatus                                      0     0     0
-kfun21                                         0     0     0
-kimon                                          0     0     0
-kinput2-wnn4                                 -15   -15   -15
-kisocd                                         0     0     0
-kless                                          0     0     0
-klilo                                          0     0     0
-klyx                                           0     0     0
-kmag                                           0     0     0
-kmol                                           0     0     0
-kmp3                                           0     0     0
-kmp3te                                         0     0     0
-koffice                                       69     0    55
-koffice-devel                                  0     0    35
-kon2                                         -12   -60   -15
-kover                                         69     0    60
-kpacman                                        0     0     0
-kreglo                                         0     0     0
-krubik                                         0     0     0
-ksendfax                                       0     0     0
-kslide                                         0     0     0
-ktail                                          0     0     0
-ktelnet                                        0     0     0
-kterm                                        -10   -90   -10
-kudzu                                         97     0    97
-kudzu-devel                                    0     0    43
-kups                                          60     0    50
-kups-devel                                     0     0     0
-kvideogen                                      0     0     0
-kvirc                                         69     0    56
-kvoice                                         0     0     0
-kvoicecontrol                                  0     0     0
-kwebget                                        0     0     0
-lame                                          15    40    35
-latex2html                                    25     0    50
-latte                                          0     0    45
-ld.so                                         98    98    98
-leafnode                                       0    50     0
-less                                          97    97    97
-lesstif                                        0     0     0
-lesstif-clients				       0     0     0
-lesstif-devel				       0     0     0
-lesstif-mwm                                    2     0     2
-lftp                                          50    78    83
-lha                                           40    25    72
-libPropList                                   10     0    80
-libPropList-devel                              0     0    34
-libc                                          10    15    75
-libelf                                        10    15    80
-libghttp                                      10     0    55
-libghttp-devel                                10     0    55
-libglade                                      10     0    55
-libglade-devel                                10     0    40
-libgr                                         10     0    71
-libgr-devel                                   10     0    70
-libgr-progs                                   10     0     9
-libgtop                                       10     0    55
-libgtop-devel                                 10     0    55
-libjpeg                                       10     0    71
-libjpeg-devel                                 10     0    70
-libmikmod                                     10     0    55
-libmikmod-devel                               10     0    55
-libnet                                        97    97    97
-libole2                                        0     0     0
-libole2-devel                                  0     0     0
-libpcap                                       10    80    72
-libpcap-devel                                  0     0     0
-libpng                                        10     0    71
-libpng-devel                                  10     0    71
-librep                                        10     0    50
-librep-devel                                  10     0    50
-libsafe                                        0     0    35
-libsigc++                                      0     0    25
-libsigc++-devel                                0     0    25
-libsigc++-examples                             0     0    25
-libstdc++                                     10     0    80
-libstdc++-compat                              10     0    60
-libstdc++-devel                               10     0    80
-libtabe                                      -15   -90   -15
-libtabe-devel                                -15   -90   -15
-libtermcap                                    10    55    87
-libtermcap-devel                              10     0    64
-libtiff                                       10     0    72
-libtiff-devel                                 10     0    72
-libtool                                       10     0    85
-libtool-devel                                  0     0     0
-libungif                                      10     0    72
-libungif-devel                                10     0    72
-libungif-progs                                10     0     2
-libunicode                                    10     0    80
-libunicode-devel                               0     0    50
-libwmf                                         0     0    15
-libxml                                        10     0    71
-libxml-devel                                  10     0    71
-libxml2                                       10     0    71
-libxml2-devel                                 10     0    71
-licq                                          62     0    45
-licq-autoreply                                45     0    30
-licq-console                                  45     0    30
-licq-devel				       0     0    20
-licq-forwarder                                45     0    30
-licq-rms				      45     0    30
-licq-update-hosts                             45     0    30
-lilo                                          99    99    99
-lilo-doc                                       0     0    30
-links                                         20    25    20
-linux_logo                                    92    72    92
-linuxconf                                     90    79    86
-linuxconf-gui                                 -1    -1    -1
-linuxconf-lib                                  0     0     0
-linuxconf-util                                 0     0     0
-linuxconf                                     90    79    86
-linuxconf-devel                               10     0    70
-lkmpg                                          2     0    65
-locales                                       96    76    96
-locales-af                                    -1    -1    -1
-locales-ar                                    -1    -1    -1
-locales-az                                    -1    -1    -1
-locales-be				      -1    -1    -1
-locales-bg                                    -1    -1    -1
-locales-br                                    -1    -1    -1
-locales-ca                                    -1    -1    -1
-locales-cs                                    -1    -1    -1
-locales-cy                                    -1    -1    -1
-locales-da                                    -1    -1    -1
-locales-de                                    -1    -1    -1
-locales-el                                    -1    -1    -1
-locales-en                                    -1    -1    -1
-locales-eo                                    -1    -1    -1
-locales-es                                    -1    -1    -1
-locales-et                                    -1    -1    -1
-locales-eu                                    -1    -1    -1
-locales-fa                                    -1    -1    -1
-locales-fi                                    -1    -1    -1
-locales-fo                                    -1    -1    -1
-locales-ur                                    -1    -1    -1
-locales-fr                                    -1    -1    -1
-locales-ga                                    -1    -1    -1
-locales-gd                                    -1    -1    -1
-locales-gl                                    -1    -1    -1
-locales-gv                                    -1    -1    -1
-locales-he                                    -1    -1    -1
-locales-hi				      -1    -1    -1
-locales-hr                                    -1    -1    -1
-locales-hu                                    -1    -1    -1
-locales-hy                                    -1    -1    -1
-locales-id                                    -1    -1    -1
-locales-is                                    -1    -1    -1
-locales-it                                    -1    -1    -1
-locales-ja                                    -1    -1    -1
-locales-ka                                    -1    -1    -1
-locales-kl                                    -1    -1    -1
-locales-ko                                    -1    -1    -1
-locales-kw                                    -1    -1    -1
-locales-lo                                    -1    -1    -1
-locales-lt                                    -1    -1    -1
-locales-lv                                    -1    -1    -1
-locales-mi				      -1    -1    -1
-locales-mk                                    -1    -1    -1
-locales-ms                                    -1    -1    -1
-locales-nl                                    -1    -1    -1
-locales-no                                    -1    -1    -1
-locales-oc                                    -1    -1    -1
-locales-pd                                    -1    -1    -1
-locales-ph				      -1    -1    -1
-locales-pl                                    -1    -1    -1
-locales-pp                                    -1    -1    -1
-locales-pt                                    -1    -1    -1
-locales-ro                                    -1    -1    -1
-locales-ru                                    -1    -1    -1
-locales-sk                                    -1    -1    -1
-locales-sl                                    -1    -1    -1
-locales-sq				      -1    -1    -1
-locales-sr                                    -1    -1    -1
-locales-sv                                    -1    -1    -1
-locales-ta				      -1    -1    -1
-locales-tg				      -1    -1    -1
-locales-th                                    -1    -1    -1
-locales-tr                                    -1    -1    -1
-locales-tt                                    -1    -1    -1
-locales-uk                                    -1    -1    -1
-locales-vi                                    -1    -1    -1
-locales-wa                                    -1    -1    -1
-locales-yi                                    -1    -1    -1
-locales-zh                                    -1    -1    -1
-logrotate                                      0    25    15
-losetup                                        5    45    35
-lout                                          15    35    10
-lout-doc                                      31    32    10
-lpg                                           40     0    80
-lpr                                          -99   -99   -99
-lrzsz                                          0    34     0
-lslk                                          20    49    54
-lsof                                          10     0    67
-ltrace                                        10     0     0
-lynx                                          42    78    84
-lyx                                           50     0    58
-m4                                            15     0    80
-macutils                                      22     5    19
-mailcap                                        5     5     4
-mailx                                         92    92    92
-make                                          50    50    94
-man                                           90    65    72
-man-pages                                     90    65    72
-man-pages-cs                                 -10   -30   -25
-man-pages-de                                 -10   -30   -25
-man-pages-es                                 -10   -30   -25
-man-pages-fr                                 -10   -30   -25
-man-pages-hu                                 -10   -30   -25
-man-pages-id                                 -10   -30   -25
-man-pages-it                                 -10   -30   -25
-man-pages-ja                                 -10   -30   -25
-man-pages-ko                                 -10   -30   -25
-man-pages-pl                                 -10   -30   -25
-man-pages-ru                                 -10   -30   -25
-man-pages-zh                                 -10   -30   -25
-mandrake-release                              99    99    99
-mandrake_desk                                 88     0    88
-mandrake_doc-de                              -15   -90	 -25
-mandrake_doc-en                              -15   -90	 -25
-mandrake_doc-es                              -15   -90	 -25
-mandrake_doc-fr                              -15   -90	 -25
-mandrake_doc-it                              -15   -90	 -25
-mandrake_doc-ru                              -15   -90	 -25
-mars-nwe                                       0    35     0
-mathplot                                      30     0    20
-mawk                                           0    25    80
-mc                                            49    45    31
-mcserv                                         0    40     9
-mek                                           40     0     0
-memprof                                        2     5    65
-menu                                          90     0    80
-menudrake       			      79    75    75
-userdrake       			      50     0    40
-mercury                                        0     0    45
-metamail                                      40    80    50
-mgetty                                        24    20     9
-mgetty-contrib                                28    20    15
-mgetty-sendfax                                28    20    15
-mgetty-viewfax                                28    20    15
-mgetty-voice                                  28    20    15
-mikmod                                        42     0    10
-mingetty                                       5    25    15
-minicom                                       27     0     4
-mirrordir                                     26    99     0
-mkbootdisk                                    35    55    60
-mkinitrd                                      99    99    99
-mkisofs                                       26     0    13
-mktemp                                        15    75    65
-mkxauth                                        2    99     1
-mm                                             0     0    15
-mm-devel                                       0     0     0
-mod_php                                      -99    35   -99
-php-gd                                       -99    15   -99
-php-imap                                     -99    15   -99
-php-ldap                                     -99    15   -99
-php-mysql                                    -99    15   -99
-php-pgsql                                    -99    15   -99
-php-oracle                                   -99    15   -99
-php-dba_gdbm_db2                             -99    15   -99
-php-readline                                 -99    15   -99
-mod_ssl                                      -99    75   -99
-mod_ssl-sxnet                                -99    30   -99
-modutils                                      99    99    99
-mon                                            0    40     0
-mount                                         97    97    97
-mouseconfig                                    0     0     0
-mozilla-fonts                                  0     0     0
-mp3info                                       50    20    50
-mpage                                         55    65    80
-mpeg_lib        			       0     0     0
-mpeg_lib-devel                                 0     0    30
-mpeg_lib-devel                        	       0     0     0
-mpg123                                        42     0    42
-msec                                          98    98    98
-mt-st                                         40     0    49
-mtools                                        90     0    84
-mutt                                          10     0    10
-mxp                                            0     0     0
-nag                                           35    75    25
-nasm                                          20    20    65
-nasm-doc                                       0    20    65
-nasm-rdoff                                     0    20    65
-nc                                             0     0     0
-ncftp                                         55     0    49
-sftp                                          15    10    15
-ncompress                                     42    79    91
-ncpfs                                          0     0     0
-ncurses                                        0     0    80
-ncurses-extraterms                             0     0     0
-ncurses-devel                                 10     0    75
-nedit                                         45    20    65
-net-tools                                     95    96    95
-netkit-base                                   82    99    82
-netscape-castellano                          -13   -30   -18
-netscape-catalan                             -13   -30   -18
-netscape-common                                0     0     0
-netscape-communicator                         78    60    73
-netscape-euskara                             -13   -30   -18
-netscape-francais                            -13   -30   -18
-netscape-german                              -13   -30   -18
-netscape-japanese                            -13   -30   -18
-netscape-navigator                             0     0     0
-netscape-polish                              -13   -30   -18
-netscape-russian                             -13   -30   -18
-netscape-spanish                             -13   -30   -18
-netscape-walon                               -13   -30   -18
-newt                                          10     0    75
-newt-devel                                    10     0    75
-nfs-utils                                    -99    80    13
-nfs-utils-clients                             23    75    23
-nist                                          55     0    45
-nmap                                           5    40    40
-nmap-frontend                                  5    40    40
-nmh                                            0     0     0
-nscd                                           0    40     0
-nss_ldap                                       0    55    25
-ntp                                           -1    -1    -1
-ntsysv                                         0    65    25
-numlock                                      -11   -11   -11
-oaf                                            0     0     0
-oaf-devel                                      0     0     0
-ocaml                                          0     0    35
-octave                                         0     0    30
-oggvorbis                                     30    10    20
-oggvorbis-devel                                0     0    15
-oggvorbis-examples                             0     0    15
-open                                          20    45    80
-openjade                                       5    15    15
-openldap                                       0    50    35
-openldap-devel                                 0     0    25
-openssl                                        0     0     0
-openssl-devel                                  0     0     0
-oregano                                        0     0     0
-p2c                                           10     0    71
-p2c-devel                                     10     0    55
-pam                                            7    99    91
-pam-devel                                      0     0     0
-pam-doc                                        0    50    50
-pan                                           22     0     0
-pango                                         10     0    10
-pango-devel                                    0     0    10
-parted                                        35    35    35
-parted-devel                                   0     0    35
-passwd                                        99    99    99
-patch                                         14     0    72
-pciutils                                      16    55    55
-pciutils-devel                                 0     0    20
-pdksh                                         10    25     9
-penguin-command                               35     0    10
-perl                                          20    19    90
-perl-Apache-Filter                             0     0     0
-perl-Apache-SSI                                0     0     0
-perl-Apache-Session                            0     0     0
-perl-Compress-Zlib                             0     0     0
-perl-Convert-BER                               0     0     0
-perl-DBI                                      10     0    65
-perl-DBIx-Recordset                            0     0     0
-perl-DB_File                                  10     0    50
-perl-Data-ShowTable                           10     0    50
-perl-Date-Calc                                 0     0     0
-perl-DateManip                                 0     0     0
-perl-Devel-Symdump                             0     0     0
-perl-Digest-MD5                               10     0    70
-perl-ExtUtils_F77                              0     0     0
-perl-File-Tail                                 0     0     0
-perl-GTK                                      10     0    72
-perl-GTK-GLArea                               10     0    70
-perl-GTK-GdkImlib                             10     0    70
-perl-GTK-Glade                                10     0    70
-perl-GTK-Gnome                                10     0    70
-perl-GTK-GtkHTML                               0     0     0
-perl-HTML-Clean                                0     0     0
-perl-HTML-Parser                              10     0    55
-perl-HTML-SimpleParse                         10     0    50
-perl-IO-stringy                                5     0    65
-perl-MIME-Base64                               5     0    45
-perl-MIME-tools                                5     0    50
-perl-MLDBM                                     0     0     0
-perl-MP3-Info                                  5     0    40
-perl-Magick                                    0     0     0
-perl-MailTools                                 5     0    50
-perl-Mon                                       0     0     0
-perl-Msgcat                                    5     0    50
-perl-Mysql                                     5     0    40
-perl-Net-Telnet                                0     0     0
-perl-Net_SSLeay                                0     0     0
-perl-PDL                                      10     0    75
-perl-PDL-doc                                   0     0     0
-perl-Parse-RecDescent                         10     0    75
-perl-Parse-Yapp                                0     0     0
-perl-Period                                    0     0     0
-perl-RPM                                       0     0     0
-perl-Storable                                  0     0     0
-perl-Term-Readline-Gnu                        10    10    88
-perl-Tie-Cache                                 0     0     0
-perl-Time-HiRes                                0     0     0
-perl-TimeDate                                  0     0     0
-perl-Tk                                        0    15     0
-perl-Tk-devel                                  0     0     0
-perl-Tk-doc                                    0     0     0
-perl-URI                                       5     0    50
-perl-XML-Parser                                0     0     0
-perl-XML-XSLT                                  0     0     0
-perl-base                                      0     0     0
-perl-devel                                     0     0    30
-perl-libnet                                   10    10    80
-perl-libwww-perl                              10    10    80
-perl-libxml-enno                               0     0     0
-perl-libxml-perl                               0     0     0
-perl-Array-RefElem                             0     0     0
-perl-Data-DumpXML                              0     0     0
-perl-ExtUtils-PerlPP                           0     0     0
-perl-File-NCopy                                0     0     0
-perl-Image-Size                                0     0     0
-perl-Mail-Sendmail                             0     0     0
-perl-Net-XWhois                                0     0     0
-perl-XML-RSS                                   0     0     0
-perlftlib                                     10     0     0
-php                                            0    35     5
-php-devel                                      0     0     5
-php-manual                                     0     0     5
-pidentd                                       15    69    87
-pilot-link                                    40     0    27
-perl-PDA-Pilot                                 0     0     0
-pilot-link-devel                              11     0    25
-pine                                          40     0    27
-pinfo                                         20    20    20
-pingus                                        40     0    10
-piranha                                        0    10     0
-piranha-docs                                   0    10     0
-piranha-gui                                    0    10     0
-playmidi                                      43     0    19
-playmidi-X11                                  53     0    20
-plugger                                       40     0    40
-pmake                                         22     0    75
-pmake-customs                                 12     0    72
-popt                                          10     0    80
-popt-devel                                     0     0    45
-portmap                                        0    91    19
-postfix                                       20    88    51
-postgresql                                     0    56    23
-postgresql-devel                               0     0    23
-postgresql-jdbc                                0     0    15
-postgresql-odbc                                0     0    23
-postgresql-perl                                0     0    23
-postgresql-python                              0     0     5
-postgresql-server                              0    56    23
-postgresql-tcl                                 0     0    23
-postgresql-test                                0     0    23
-postgresql-tk                                  0     0     5
-ppp                                            0     0     0
-pppoe-linuxconf                                0     0     0
-pptp-adsl-fr                                 -99   -99   -99
-pptp-client                                  -99   -99   -99
-procinfo                                      24    15    96
-procmail                                       2    65    45
-procps                                        98    98    98
-procps-X11                                    50     0    32
-procps-devel                                   0     0     0
-proftpd                                      -99   -99   -99
-psacct                                        20    70    87
-psmisc                                        25    62    56
-pspell                                         0     0     0
-pspell-devel                                   0     0     0
-psutils                                        5    42    15
-pth                                            0     0    25
-pth-devel                                      0     0    15
-publib-devel                                   0     0     0
-pump                                           0     0     0
-pump-devel                                     0     0     0
-pwdb                                          13    90    75
-pwdb-devel                                     0     0    50
-pygnome                                       12     0    50
-pygnome-applet                                10     0    30
-pygnome-capplet                               10     0    30
-pygnome-libglade                              10     0    30
-pygtk                                         13     0    50
-pygtk-glarea                                  15     0    25
-pygtk-libglade                                16     0    50
-pysol                                         27     0    27
-python                                        15     0    74
-python-devel                                   0     0    65
-python-docs                                   31     0    40
-python-imaging                                31     0    40
-pythonlib                                     17     0    75
-qcad                                           5     0     5
-qiv                                           78     0    70
-qt                                             0     0    55
-qt-devel                                      10     0    55
-qt-qgl                                        10     0    50
-qt-qimgio                                     10     0    50
-qt2                                            0     0    45
-qt2-devel                                      0     0    45
-qt2-doc                                        0     0    30
-qtcups                                         0     0     0
-qtcups-devel                                   0     0     0
-queso                                          0    25    35
-quota                                         42    85    37
-raidtools                                     25    85     4
-rcs                                           12     0    71
-rdate                                         10    80     9
-rdist                                         10    75     9
-readline                                      11     0    70
-readline-devel                                11     0    65
-recode                                        10     0    72
-recode-devel                                   0     0    50
-reiserfs-utils                                60    60    60
-rep-gtk                                        0     0    20
-rep-gtk-gnome                                  0     0    20
-rep-gtk-libglade                               0     0    20
-rgrep                                         55    55    75
-rhs-printfilters                               1     1     0
-rmt                                           24     0    24
-rocksndiamonds                                35     0    10
-rootfiles                                     99    99    99
-routed                                         0    90    19
-rp-pppoe                                     -99   -99   -99
-rpm                                           99    99    99
-rpm-build                                     45    45    70
-rpm-devel                                     10     0    80
-rpm-python                                     0     0    50
-rpmdrake                                      84     0    81
-rpmlint                                       10    10    60
-rpmtools                                       0     0    25
-rpmtools-compat                                0     0     0
-rpmtools-devel                                 0     0    25
-rsh                                           46    99    75
-rsh-server                                   -99    55    25
-rsync                                         20    99    75
-ruby                                           0     0    25
-ruby-doc				       0     0    25
-ruby-extensions				       0     0    25
-ruby-gtk                                       0     0    25
-rusers                                        20     0    20
-rute                                         -50   -75   -60
-rwall                                         -1     0    -1
-rwho                                          -1     0    -1
-rxvt                                          49     0    80
-rxvt-CLE                                     -10   -90   -10
-sag                                           39    35    25
-samba                                         21    99    23
-samba-client                                  55    56    50
-samba-common                                   0     0     0
-sane                                          45     0    53
-sane-devel                                    10     0     2
-sash                                           5     5     5
-sawfish                                       59     0    57
-sawfish-themer                                15     0    15
-sawfish-themes                                50     0    50
-screen                                        26    43    79
-sed                                           97    97    97
-sendmail                                     -99   -99   -99
-sendmail-cf                                    0     0     0
-sendmail-doc                                   0     0     0
-setserial                                     42     0    55
-setup                                         15    25    15
-sfm                                           25     0    25
-sgml-common                                    5    15    15
-sgml-tools                                     5    15    15
-sh-utils                                      97    97    97
-shadow-utils                                  98    98    98
-shapecfg                                      20    75     8
-sharutils                                     43    99    38
-sketch                                        45     0     0
-slang                                         12     0    75
-slang-devel                                   10     0    70
-slang-doc                                      0     0    70
-slocate                                       99    99    99
-slrn                                          10     0    10
-slrn-pull                                     35     0    45
-smpeg                                         50     0    25
-smpeg-devel                                    0     0    25
-sndconfig                                     70    40    70
-sox                                           41    32    80
-sox-devel                                     13     0    70
-space_sounds                                  52     0    55
-spacecup                                      -1    -1    -1
-spec-helper                                    0     0    35
-spellutils                                     0     0     0
-spruce                                         0     0     0
-squid                                          0    45    16
-stat                                           5    55    45
-statserial                                    15     0    13
-strace                                        11     0    87
-sudo                                           0    30     0
-svgalib                                       10     0    63
-svgalib-devel                                 10     0    63
-swatch                                        22    65     4
-swi-prolog                                     5     5    45
-swig                                           0     0    20
-swig-devel                                     0     0    10
-symlinks                                      23    75    29
-sympa                                         -1    40    -1
-sysklogd                                      97    97    97
-t1lib                                          1     0    29
-t1lib-devel                                   10     0    40
-taipeifonts                                  -10     0   -10
-talk                                          44     0    39
-talk-server                                    0     0     0
-taper                                         42     0    27
-tar                                           97    97    97
-tcl                                           12     0    70
-tcllib                                         0     0     0
-tclx                                          12     0    70
-tcp_wrappers                                   0    99     0
-tcp_wrappers-devel                             0     0     0
-tcpdump                                       10    79     2
-tcsh                                           1    25    15
-telnet                                        90    79    92
-openssh                                       65    75    65
-openssh-server                               -99    35   -99
-openssh-clients                               65    75    65
-openssh-askpass                                0     0     0
-openssh-askpass-gnome                          0     0     0
-gnupg                                         90    90    90
-telnet-server                                -99    28   -99
-termcap                                       98    98    98
-tetex                                         25     0    50
-tetex-afm                                     25     0    40
-tetex-doc                                     25     0    40
-tetex-dvilj                                   40     0    40
-tetex-dvips                                   25     0    40
-tetex-latex                                   25     0    40
-tetex-latex-heb                              -65   -90   -90
-tetex-xdvi                                    25     0    50
-texinfo                                       22     0    50
-textutils                                     99    99    99
-teyjus                                         0     0    35
-tftp                                           0    40     2
-tftp-server                                    0    40     2
-thud                                           0     0     0
-time                                          40    65    87
-timeconfig                                    55    80    60
-timed                                         40    70    36
-timetool                                      54     0    57
-timidity-instruments                          51     0    54
-tin                                           44     0    39
-tix                                           15     0    60
-tk                                            15     0    60
-tkbabel                                       15     0    15
-tkcvs                                         15     0    15
-tkinter                                       15     0    60
-tksysv                                        55     0    60
-tmake                                         10     0    25
-tmpwatch                                      35    75    60
-traceroute                                    40    79    29
-transfig                                      16     0    14
-tree                                          40    25    10
-trn                                           46     0    41
-trophy                                        35     0    10
-tunelp                                        24    15    28
-tuxracer                                      -1    -1    -1
-ucd-snmp                                       0    70    45
-ucd-snmp-devel                                 0    25    45
-ucd-snmp-utils                                 0    37    45
-umb-scheme                                    10     0    65
-unarj                                         40    45    16
-units                                         22     0    10
-unixODBC                                       0     0     0
-unzip                                         70    75    91
-urlview                                       43     0    47
-urpmi                                         95    95    95
-urw-fonts                                     50     0    34
-usbview                                        5     0    10
-usermode                                      51     0    58
-usernet                                       42    55    37
-utempter                                      90     0    73
-utempter-devel                                 0     0     0
-util-linux                                    98    98    98
-uucp                                           0    80     2
-uxcook                                         0     0     0
-vigmeup                                       23     0    11
-vim-X11                                       52     0    26
-vim-common                                     0    19     0
-vim-enhanced                                  46    78    83
-vim-minimal                                   98    98    98
-vimguide                                      30     0    25 
-vixie-cron                                    97    97    97
-vlock                                         40    99    80
-vnc                                           44     0    39
-vnc-SVGALIB                                   43     0    38
-vnc-doc                                       38    35    33
-vnc-java                                      38     0    34
-vnc-server                                     0    40    28
-webmin                                        20    40    20
-wget                                          65    75    53
-which                                          1    25    25
-wine                                          54     0    57
-wine-devel                                     0     0     0
-wmakerconf                                    47     0    57
-wmnet                                         24     0    21
-words                                         47    85    42
-wu-ftpd                                      -99    85   -99
-wv                                            55     0    54
-wv-devel                                       0     0     0
-x3270                                          1     0     0
-xa+cv                                        -10   -20   -10
-xalf                                          68     0    55
-xanim                                         58     0    54
-xbanner                                       15     0    12
-xboard                                        54     0    48
-xboing                                        53     0    47
-xcdroast                                      59     0    53
-xchat                                         58     0    52
-xcin                                         -10   -10   -10
-xcpustate                                     53     0    47
-xdaliclock                                    57     0    51
-xdelta                                        16     0     5
-xdelta-devel                                  10     0     2
-xdosemu                                       34     0    37
-xearth                                        53     0    56
-xemacs                                        57     0     0
-xemacs-el                                      0     0    15
-xemacs-extras                                 50     0    36
-xemacs-info                                   54     0    42
-xemacs-mule                                    0     0     0
-xfce                                           0     0     0
-xfig                                          39     0    33
-xfishtank                                     51     0    45
-xgammon                                       40     0    31
-xinetd                                         0     0     0
-xinetd-devel                                   0     0     0
-xinitrc                                        0     0     0
-xinput                                        10     0    30
-xjewel                                        58     0    52
-xkobo                                         57     0    51
-xli                                           65     0    60
-xlispstat                                      2     0    45
-xloadimage                                    45     0    30
-xlockmore                                     58     0    52
-xmailbox                                      53     0    47
-xmame                                         25     0    25
-xmess                                         25     0    15
-xmms                                          64     0    57
-xmms-devel                                     0     0    15
-xmms-esd                                      46     0    41
-xmms-gnome                                    62     0    52
-xmms-kjofol-skins                             50     0    50
-xmms-mesa                                     -1    -1    -1
-xmms-mikmod                                   43     0    38
-xmms-more-vis-plugins                         55     0    55
-xmms-oggvorbis                                64     0    57
-xmms-skins                                    60     0    55
-xmms-smpeg                                    50     0    45
-xmorph                                        52     0    44
-xmovie                                        55     0    35
-xntp3                                          0    75    31
-xoscope                                       10     0    10
-xosview                                       51     0    45
-xpaint                                        53     0    47
-xpat2                                         43     0    38
-xpcd                                          40     0    30
-xpcd-gimp                                     30     0    25
-xpcd-svga                                      0     0     0
-xpdf                                          57     0    51
-xpilot                                        59     0    53
-xpm                                           52     0    64
-xpm-devel                                     10     0    56
-xpp                                           60     0    50
-xpuzzles                                      50     0    43
-xrally                                         5     0     5
-xrn                                           55     0    49
-xscreensaver                                  68     0    55
-xscreensaver-gl                               -1    -1    -1
-xsoldier                                      51     0    45
-xsysinfo                                      55     0    56
-xterm                                         87     0    80
-xtoolwait                                     50     0    35
-xtraceroute                                   50     0    40
-xtrojka                                       51     0    45
-xwc                                           65     0    40
-xwpe                                           0     0    20
-xwpe-X11                                       0     0    20
-xwpick                                        55     0    49
-xxgdb                                         53     0    47
-yodl                                           0     0     0
-yp-tools                                       0    40     0
-ypbind                                         0    40     0
-ypserv                                         0     0     0
-ytalk                                         21    75    18
-yudit                                         50     0    38
-zgv                                           15     0    13
-zip                                           70    65    87
-zlib                                          16    60    94
-zlib-devel                                    10     0    72
-zsh                                           20    50    72
-zsh-doc                                        0    35    60
-jpilot                                        40     0    30
-jpilot-Mail                                   12     0    10
-jpilot-syncmal                                12     0    10
-jpilot-plugin-devel                            0     0     0
-Maelstrom                                     50     0    35
-auctex                                         5     0     5
-bcast                                         15     0    10
-mpeg2_movie                                   10     0     8
-bg5ps                                        -10   -10   -10
-eroaster                                      55     0    45
-everybuddy                                    52     0    52
-jabber                                         0    30     0
-libjabber                                      0     0     0
-libjabber-devel                                0     0     0
-gabber                                        35    10    20
-gdk-pixbuf-gnomecanvas                         0     0     0
-gdk-pixbuf-loaders                             0     0     0
-gdk-pixbuf-xlib                                0     0     0
-htdig                                         20     0    15
-libxode                                        0     0     0
-libxode-devel                                  0     0     0
-libgnet                                        0     0     0
-libgnet-devel                                  0     0     0
-libetherx                                      0     0     0
-libetherx-devel                                0     0     0
-screem                                        55     0    60
-portsentry                                     0    15     0
-ttfprint                                     -10   -10   -10
-kde-i18n-Afrikaans                           -12   -51	 -23
-kde-i18n-Basque				     -12   -51	 -23
-kde-i18n-Brazil				     -12   -51	 -23
-kde-i18n-Breton				     -12   -51	 -23
-kde-i18n-British			     -12   -51	 -23
-kde-i18n-Bulgarian			     -12   -51	 -23
-kde-i18n-Catalan			     -12   -51	 -23
-kde-i18n-Chinese			     -12   -51	 -23
-kde-i18n-Chinese-Big5			     -12   -51	 -23
-kde-i18n-Croatian			     -12   -51	 -23
-kde-i18n-Czech				     -12   -51	 -23
-kde-i18n-Danish				     -12   -51	 -23
-kde-i18n-Dutch				     -12   -51	 -23
-kde-i18n-Esperanto			     -12   -51	 -23
-kde-i18n-Estonian			     -12   -51	 -23
-kde-i18n-Finnish			     -12   -51	 -23
-kde-i18n-French				     -12   -51	 -23
-kde-i18n-Galacian			     -12   -51	 -23
-kde-i18n-German				     -12   -51	 -23
-kde-i18n-Greek				     -12   -51	 -23
-kde-i18n-Hebrew				     -12   -51	 -23
-kde-i18n-Hungarian			     -12   -51	 -23
-kde-i18n-Icelandic			     -12   -51	 -23
-kde-i18n-Italian			     -12   -51	 -23
-kde-i18n-Japanese			     -12   -51	 -23
-kde-i18n-Korean				     -12   -51	 -23
-kde-i18n-Lithuanian			     -12   -51	 -23
-kde-i18n-Macedonian			     -12   -51	 -23
-kde-i18n-Maori				     -12   -51	 -23
-kde-i18n-Norwegian			     -12   -51	 -23
-kde-i18n-Norwegian			     -12   -51	 -23
-kde-i18n-Polish				     -12   -51	 -23
-kde-i18n-Portuguese			     -12   -51	 -23
-kde-i18n-Romanian			     -12   -51	 -23
-kde-i18n-Russian			     -12   -51	 -23
-kde-i18n-Serbian			     -12   -51	 -23
-kde-i18n-Slovak				     -12   -51	 -23
-kde-i18n-Slovenian			     -12   -51	 -23
-kde-i18n-Spanish			     -12   -51	 -23
-kde-i18n-Swedish			     -12   -51	 -23
-kde-i18n-Tamil				     -12   -51	 -23
-kde-i18n-Thai				     -12   -51	 -23
-kde-i18n-Turkish			     -12   -51	 -23
-kde-i18n-Ukrainian			     -12   -51	 -23
-kde-i18n-Walloon			     -12   -51	 -23
-kde-i18n-Welsh                               -12   -51	 -23
-kde-i18n-Norwegian-Nynorsk                   -12   -51	 -23
-linuxconf-lang-cn                            -35   -60   -35
-linuxconf-lang-cs		             -35   -60   -35
-linuxconf-lang-de		             -35   -60   -35
-linuxconf-lang-es			     -35   -60   -35
-linuxconf-lang-fi			     -35   -60   -35
-linuxconf-lang-fr			     -35   -60   -35
-linuxconf-lang-it			     -35   -60   -35
-linuxconf-lang-ko			     -35   -60   -35
-linuxconf-lang-no			     -35   -60   -35
-linuxconf-lang-pt			     -35   -60   -35
-linuxconf-lang-ro			     -35   -60   -35
-linuxconf-lang-ru-SU			     -35   -60   -35
-linuxconf-lang-se			     -35   -60   -35
-linuxconf-lang-sk			     -35   -60   -35
-linuxconf-lang-zh                            -35   -60   -35
-7colors                                       15     0     0
-ltris                                         28     0     0
-lbreakout                                     35     0     0
-fonts-hebrew-elmar                           -30   -30   -30
-kwintv                                         0     0     0
-xawtv                                          0     0     0
-xawtv-misc                                     0     0     0
-xawtv-radio                                    0     0     0
-wxxt                                           0     0     0
-wxxt-devel                                     0     0     0
-surfraw                                        0     0     0
-R-base                                         0     0     0
-gpa                                           20     0     0
-gnome-telnet                                   0     0     0
-quanta                                        32     0    24
-nslint                                         0    12     0
-logcheck                                       0    12     0
-kisdn-free                                    33     0    30
-
-# commercial                           
-ac3d                                          20     0    20
-acroread                                      24    15    24
-acroread-nppdf                                24    15    24
-IglooFTP-PRO                                  20    20    20
-interbase                                      0    15    15
-interbase-docs                                 0    15    15
-civctp-demo                                   22     0    20
-compupic                                      19     0    19
-commercial-menu                               50    40    50
-eus-demo                                      23     0    20
-myth2-demo                                    24     0    25
-macromedia-flash                              45    15    45
-RealPlayer                                    27    15    27
-RealPlayer-rpnp                               27    15    27
-scol                                          23     0    23
-avp-database                                  20    20    20
-avp-linux                                     20    20    20
-arkeia-arkc                                    0    20     0
-arkeia-client                                 20     0    20
-arkeia-gui                                    24     0    20
-arkeia-server-shareware                        0    30     0
-Artstream                                     20     0     0
-citrix-icaclient-en                          -70   -70   -70
-citrix-icaclient-fr                          -70   -70   -70
-citrix-icaclient-ge                          -70   -70   -70
-citrix-icaclient-sp                          -70   -70   -70
-printpro                                       0     0     0
-printpro-agfa                                  0     0     0
-printpro-alps                                  0     0     0
-printpro-apple                                 0     0     0
-printpro-autologic		               0     0     0
-printpro-calcomp		               0     0     0
-printpro-canon			               0     0     0
-printpro-digital		               0     0     0
-printpro-efi			               0     0     0
-printpro-encad			               0     0     0
-printpro-epson			               0     0     0
-printpro-hp			               0     0     0
-printpro-ibm			               0     0     0
-printpro-lexmark		               0     0     0
-printpro-lhag			               0     0     0
-printpro-linotronic		               0     0     0
-printpro-nec			               0     0     0
-printpro-oki			               0     0     0
-printpro-otheram		               0     0     0
-printpro-othernz		               0     0     0
-printpro-qms			               0     0     0
-printpro-seiko			               0     0     0
-printpro-sony			               0     0     0
-printpro-tektronix		               0     0     0
-printpro-ti			               0     0     0
-printpro-varityper		               0     0     0
-printpro-xerox                                 0     0     0
-emumail4.0                                     0    20     0
-EnlightenDSMFree                               0    24     0
-EnlightenDSMFree-dsa                           0    24     0
-EnlightenDSMFree-gui                           0    24     0
-ForteCE-FCS                                    0     0    30
-ViaVoice_Outloud_rtk                           0     0    45
-ViaVoice_Outloud_sdk                           0     0    45
-ViaVoice_runtime                               0     0    45
-ViaVoice_sdk                                   0     0    45
-jdk-sun                                        0     0    35
-jdk-sun-doc                                    0     0    35
-jre-sun                                       20     0    35
-heretic2-demo                                 24     0    24
-heroes3-demo                                  24     0    24
-rt2-demo                                      24     0    24
-MainActor                                     24     0     0
-mupad                                         20     0    20
-mtv                                           24     0    24
-mtv-fullscreen-extension                      15     0    15
-NetPartitioner                                 0    24     0
-omnimark                                       0     0    35
-rebol-core                                     0     0    30
-staroffice-de                                -64   -90   -64
-staroffice-en                                -64   -90   -64
-staroffice-fr                                -64   -90   -64
-staroffice-it                                -64   -90   -64
-staroffice-nl                                -64   -90   -64
-staroffice-pt                                -64   -90   -64
-staroffice-es                                -64   -90   -64
-staroffice-sv                                -64   -90   -64
-tina-base                                      0     0     0
-tina-lesstif                                   0     0     0
-tina-oracle80                                  0     0     0
-tina-oracle8i                                  0     0     0
-tina-server                                    0     0     0
-VMware                                        20     0    35
-VariCAD                                       24     0    24
-ViaVoice_runtime                              26     0    26
-<<<<<<< compssList
-viavoicemenu				      26     0    26
-=======
-viavoicemenu                                  26     0    26
->>>>>>> 1.139
-kisdn                                          0     0     0
diff --git a/perl-install/share/compssUsers b/perl-install/share/compssUsers
deleted file mode 100644
index 163a1e32d..000000000
--- a/perl-install/share/compssUsers
+++ /dev/null
@@ -1,97 +0,0 @@
-     # --- Workstation
-
-Office Workstation [icon=office] [path=Workstation] [descr=Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc]
-	OFFICE
-	PUBLISHING
-	PIM
-
-Game station [icon=arcade] [path=Workstation] [descr=Amusement programs: arcade, boards, strategy, etc]
-	GAMES
-
-Multimedia station [icon=multimedia] [path=Workstation] [descr=Sound and video playing/editing programs]
-	AUDIO
-	VIDEO
-	GRAPHICS
-
-Internet station [icon=networking] [path=Workstation] [descr=Set of tools to read and send mail and news (pine, mutt, tin..) and to browse the Web]
-	NETWORKING_WWW
-	NETWORKING_MAIL
-	NETWORKING_NEWS
-	COMMUNICATIONS
-	NETWORKING_CHAT
-	NETWORKING_FILE_TRANSFER
-	NETWORKING_IRC
-	NETWORKING_INSTANT_MESSAGING
-	NETWORKING_DNS
-
-Network Computer (client) [icon=terminals] [path=Workstation] [descr=Clients for different protocols including ssh]
-	NETWORKING_REMOTE_ACCESS
-	NETWORKING_FILE
-
-Configuration [icon=configuration] [path=Workstation] [descr=Tools to ease the configuration of your computer]
-	CONFIG
-
-Scientific Workstation [icon=sciences] [path=Workstation] [descr=]
-	SCIENCES
-
-Console Tools [icon=terminals] [path=Workstation] [descr=Editors, shells, file tools, terminals]
-	EDITORS
-	TERMINALS
-	TEXT_TOOLS
-	SHELLS
-	FILE_TOOLS
-
-Utilities [icon=configuration] [path=Workstation] [descr=Archiving, emulators, monitoring]
-	MONITORING
-	EMULATORS
-	ACCESSIBILITY
-	ARCHIVING
-	NETWORKING_OTHER
-
-     # --- Graphical Environment
-
-KDE Workstation [icon=kde] [path=Graphical Environment] [descr=The K Desktop Environment, the basic graphical environment with a collection of accompanying tools]
-	KDE
-	X
-
-Gnome Workstation [icon=gnome] [path=Graphical Environment] [descr=A graphical environment with user-friendly set of applications and desktop tools]
-	GNOME
-	X
-
-Other Graphical Desktops [icon=windowmanager] [path=Graphical Environment] [descr=Icewm, Window Maker, Enlightenment, Fvwm, etc]
-	GRAPHICAL_DESKTOP
-	X
-
-
-     # --- Development
-
-Development [icon=editors] [path=Development] [descr=C and C++ development libraries, programs and include files]
-	DEVELOPMENT
-
-Documentation [icon=documentation] [path=Development] [descr=Books and Howto's on Linux and Free Software]
-	BOOKS
-
-     # --- Server
-
-Web/FTP  [icon=file_transfer] [path=Server] [descr=Apache, Pro-ftpd]
-	NETWORKING_WWW_SERVER
-	NETWORKING_FILE_TRANSFER_SERVER
-
-Mail/Groupware/News [icon=mail] [path=Server] [descr=Postfix mail server, Inn news server]
-	NETWORKING_MAIL_SERVER
-	NETWORKING_NEWS_SERVER
-
-Database [icon=archiving] [path=Server] [descr=PostgreSQL or MySQL database server]
-	DATABASES
-	DATABASES_SERVER
-
-Firewall/Router [icon=networking] [path=Server] [descr=Internet gateway]
-	NETWORKING_FIREWALLING_SERVER
-
-DNS/NIS [icon=hardware] [path=Server] [descr=Domain Name and Network Information Server] 
-	NIS_SERVER
-	NETWORKING_DNS_SERVER
-
-Network Computer server [icon=networking] [path=Server] [descr=NFS server, SMB server, Proxy server, ssh server]
-	NETWORKING_FILE_SERVER
-	NETWORKING_REMOTE_ACCESS_SERVER
diff --git a/perl-install/share/compssUsers.desktop b/perl-install/share/compssUsers.desktop
deleted file mode 100644
index f836d6731..000000000
--- a/perl-install/share/compssUsers.desktop
+++ /dev/null
@@ -1,39 +0,0 @@
-Office [icon=office] [descr=Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc]
-	Office
-
-Internet [icon=networking] [descr=Set of tools for mail, news, web, file transfer, and chat]
-	Networking
-
-Games [icon=amusement] [descr=Amusement programs: arcade, boards, strategy, etc]
-	Games
-
-Multimedia - Graphics [icon=graphics] [descr=Graphics programs such as The Gimp]
-	Graphics
-
-Multimedia - Sound [icon=multimedia] [descr=Audio-related tools: mp3 or midi players, mixers, etc]
-	Sound
-
-Multimedia - Video [icon=video] [descr=Video players and editors]
-	Video
-
-Multimedia - CD Burning [icon=cd_burning] [descr=Tools to create and burn CD's]
-	Archiving/Cd burning
-
-More Graphical Desktops (Gnome, IceWM) [icon=windowmanager] [descr=Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc]
-	Graphical desktop/GNOME
-	Graphical desktop/Sawmill
-	Graphical desktop/Icewm
-	+XFree86-75dpi-fonts
-	+fonts-ttf-west_european
-
-Personal Information Management [icon=remote_access] [descr=Tools for your Palm Pilot or your Visor]
-	+jpilot
-	+pilot-link
-	+kde-pim
-	+gnome-pim
-	+gnome-pim-conduits
-
-Personal Finance [icon=sciences] [descr=Programs to manage your finance, such as gnucash]
-	+gnucash
-	+MoneyDance
-
diff --git a/perl-install/share/consolefonts/Cyr_a8x16 b/perl-install/share/consolefonts/Cyr_a8x16
deleted file mode 100644
index a09ac03d8..000000000
--- a/perl-install/share/consolefonts/Cyr_a8x16
+++ /dev/null
diff --git a/perl-install/share/consolefonts/lat0-sun16 b/perl-install/share/consolefonts/lat0-sun16
deleted file mode 100644
index 19e3d432e..000000000
--- a/perl-install/share/consolefonts/lat0-sun16
+++ /dev/null
diff --git a/perl-install/share/consolefonts/lat2-sun16 b/perl-install/share/consolefonts/lat2-sun16
deleted file mode 100644
index 509e5def2..000000000
--- a/perl-install/share/consolefonts/lat2-sun16
+++ /dev/null
diff --git a/perl-install/share/consolefonts/ruscii_8x16 b/perl-install/share/consolefonts/ruscii_8x16
deleted file mode 100644
index b0513a9db..000000000
--- a/perl-install/share/consolefonts/ruscii_8x16
+++ /dev/null
diff --git a/perl-install/share/diskdrake.rc b/perl-install/share/diskdrake.rc
deleted file mode 100644
index 317fc2684..000000000
--- a/perl-install/share/diskdrake.rc
+++ /dev/null
@@ -1,43 +0,0 @@
-style "font"
-{
-  fontset = "-*-*-medium-r-normal-*-8-*-*-*-*-*-iso8859-1,*-r-*"
-}
-
-style "red" = "font"
-{
-  bg[NORMAL] = { 1.0, 0, 0 }
-  bg[PRELIGHT] = { 0.9, 0, 0 }
-}
-style "darkred" = "font"
-{
-  bg[NORMAL] = { 0.7, 0, 0 }
-  bg[PRELIGHT] = { 0.6, 0, 0 }
-}
-style "green" = "font"
-{
-  bg[NORMAL] = { 0, 1.0, 0 }
-  bg[PRELIGHT] = { 0, 0.9, 0 }
-  fg[NORMAL] = { 0, 0, 0 }
-}
-style "blue" = "font"
-{
-  bg[NORMAL] = { 0, 0, 1.0 }
-  bg[PRELIGHT] = { 0, 0, 0.9 }
-}
-style "white" = "font"
-{
-  bg[NORMAL] = { 1.0, 1.0, 1.0 }
-  bg[PRELIGHT] = { 0.67, 0.67, 0.67 }
-  fg[NORMAL] = { 0, 0, 0 }
-}
-
-widget "*Linux*"      style "red" 
-widget "*Ext2*"       style "red" 
-widget "*Journalised FS*"   style "darkred" 
-widget "*Linux swap*" style "green"
-widget "*Swap*"       style "green"
-widget "*FAT*"        style "blue"
-widget "*SunOS*"      style "blue"
-widget "*NT NTFS*"    style "blue"
-widget "*Empty*"      style "white"
-widget "*Other*"      style "font"
diff --git a/perl-install/share/floppy.png b/perl-install/share/floppy.png
deleted file mode 100644
index 2265e6ec6..000000000
--- a/perl-install/share/floppy.png
+++ /dev/null
diff --git a/perl-install/share/fonts.tar.bz2 b/perl-install/share/fonts.tar.bz2
deleted file mode 100644
index 9b5a97b00..000000000
--- a/perl-install/share/fonts.tar.bz2
+++ /dev/null
diff --git a/perl-install/share/ftin.png b/perl-install/share/ftin.png
deleted file mode 100644
index 3cec3c194..000000000
--- a/perl-install/share/ftin.png
+++ /dev/null
diff --git a/perl-install/share/ftout.png b/perl-install/share/ftout.png
deleted file mode 100644
index d821716eb..000000000
--- a/perl-install/share/ftout.png
+++ /dev/null
diff --git a/perl-install/share/gen_locales.sh b/perl-install/share/gen_locales.sh
deleted file mode 100755
index 981170484..000000000
--- a/perl-install/share/gen_locales.sh
+++ /dev/null
@@ -1,46 +0,0 @@
-#!/bin/sh
-
-rm -rf .tmp ; mkdir .tmp ; cd .tmp
-tar xfj ../locales-skeleton.tar.bz2
-
-# locale utf-8
-for i in LC_ADDRESS LC_COLLATE LC_IDENTIFICATION LC_MEASUREMENT LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE LC_TIME LC_MESSAGES/SYS_LC_MESSAGES ; do
-    cp -f /usr/share/locale/UTF-8/$i usr/share/locale/UTF-8/$i
-done
-
-# lc_ctype for common encoding
-for i in CP1251 ISO-8859-13 ISO-8859-14 ISO-8859-15 ISO-8859-2 ISO-8859-3 ISO-8859-7 ISO-8859-9 ISO-8859-9E ; do
-    f=usr/share/locale/$i/LC_CTYPE
-    [ -e /$f ] || { echo missing /$f ; exit 1 ; }
-    cp -f /$f $f
-done
-
-rm -rf .tmp2 ; mkdir .tmp2 ; cd .tmp2
-for i in hy ja ko th vi ; do
-    ii=locales-`echo $i | sed 's/\(..\).*/\1/'`
-    rpm2cpio /RPMS/$ii-*.rpm | cpio -id --quiet
-    f=usr/share/locale/$i/LC_CTYPE
-    [ -e $f ] || { echo missing $f in package $ii ; exit 1 ; }
-    cp -f $f ../$f
-    rm -rf *
-done
-cd .. ; rm -rf .tmp2
-
-# special case for chineese (why is it needed?)
-rm -rf .tmp2 ; mkdir .tmp2 ; cd .tmp2
-for i in zh_CN.GB2312 zh_TW.Big5 ; do
-    ii=locales-`echo $i | sed 's/\(..\).*/\1/'`
-    rpm2cpio /RPMS/$ii-*.rpm | cpio -id --quiet
-    for f in LC_ADDRESS LC_COLLATE LC_CTYPE LC_IDENTIFICATION LC_MEASUREMENT LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE LC_TIME LC_MESSAGES/SYS_LC_MESSAGES ; do
-	f=usr/share/locale/$i/$f
-	[ -e $f ] || { echo missing $f in package $ii ; exit 1 ; }
-	cp -f $f ../$f
-    done
-    rm -rf *
-done
-cd .. ; rm -rf .tmp2
-
-
-tar cfj ../locales.tar.bz2 usr
-
-cd .. ; rm -rf .tmp
diff --git a/perl-install/share/help.png b/perl-install/share/help.png
deleted file mode 100644
index ddebe33ad..000000000
--- a/perl-install/share/help.png
+++ /dev/null
diff --git a/perl-install/share/install.rc b/perl-install/share/install.rc
deleted file mode 100644
index b86a22c29..000000000
--- a/perl-install/share/install.rc
+++ /dev/null
@@ -1,21 +0,0 @@
-style "default-font" 
-{
-  fontset = "-*-*-medium-r-normal-*-12-*-*-*-*-*-iso8859-15"
-}
-
-style "small-font"
-{
-  fontset = "-*-*-medium-r-normal-*-8-*-*-*-*-*-iso8859-15"
-}
-
-style "logo" = "background"
-{
-  # no background image
-  engine "pixmap" { image { function = FLAT_BOX } }
-}
-
-widget "*" style "default-font"
-widget "Steps" style "steps"
-widget "*Steps*" style "small-font"
-widget "*logo*" style "logo"
-
diff --git a/perl-install/share/keyboards.tar.bz2 b/perl-install/share/keyboards.tar.bz2
deleted file mode 100644
index 4a0b74b75..000000000
--- a/perl-install/share/keyboards.tar.bz2
+++ /dev/null
diff --git a/perl-install/share/keymaps.tar.bz2 b/perl-install/share/keymaps.tar.bz2
deleted file mode 100644
index 8ca03c137..000000000
--- a/perl-install/share/keymaps.tar.bz2
+++ /dev/null
diff --git a/perl-install/share/keymaps_generate b/perl-install/share/keymaps_generate
deleted file mode 100755
index 0265502c9..000000000
--- a/perl-install/share/keymaps_generate
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/usr/bin/perl
-
-use lib "..";
-use keyboard;
-
-my $dir = "keymaps/usr/share/keymaps";
-system("rm -rf keymaps ; mkdir -p keymaps/usr/share/keymaps");
-
-foreach (keyboard::keyboards()) {
-    my $kmap = keyboard::keyboard2kmap($_);
-    if (system("./kmap2bkmap $kmap > $dir/$kmap.bkmap 2>/dev/null") != 0) {
-	warn "unknown kmap $kmap\n";
-	unlink "$dir/$kmap.bkmap";
-    }
-}
-
-system("tar cfj keymaps.tar.bz2 -C keymaps usr") == 0 or die;
-system("rm -rf keymaps");
diff --git a/perl-install/share/kmap2bkmap b/perl-install/share/kmap2bkmap
deleted file mode 100755
index 3aff35c3e..000000000
--- a/perl-install/share/kmap2bkmap
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/usr/bin/perl
-
-use lib "..";
-use c;
-
-my $KMAP_MAGIC = 0x8B39C07F;
-
-BEGIN { @ARGV == 1 or die "usage: kmap2bkmap <keymap>\n" }
-
-system("sudo loadkeys $ARGV[0]") == 0 or die;
-open F, "dumpkeys -n -f |";
-<F> =~ /^keymaps\s+(.*)/ or die;
-foreach (split ',', $1) {
-    my @l = /(\d+)-(\d+)/;
-    my ($i, $j) = @l ? @l : ($_,$_);
-    $keymaps[$_] = 1 foreach $i .. $j;
-}
-
-print pack("I", $KMAP_MAGIC);
-print map { pack "i", $keymaps[$_] || 0 } 0 .. c::MAX_NR_KEYMAPS()-1;
-
-foreach (<F>) {
-    s/\+0x/0x/g;
-    my ($keycode, $key, undef, @l) = split;
-    $keycode eq 'keycode' or next;
-    my $i = 0;
-    $L[$i++][$key] = hex $_ foreach @l;
-}
-close F or die "dumpkeys failed";
-
-foreach (@L) {
-    foreach my $i (0 .. c::NR_KEYS()-1) {
-	print pack "s", defined $_->[$i] ? $_->[$i] : 0x200;
-    }
-}
-
-exit 0;
diff --git a/perl-install/share/list b/perl-install/share/list
deleted file mode 100644
index 5088abc34..000000000
--- a/perl-install/share/list
+++ /dev/null
@@ -1,163 +0,0 @@
-/bin/ash
-/bin/consolechars
-/bin/cpio
-/bin/gzip
-/lib/libnss_nis.so.2
-/lib/libnss_files.so.2
-/lib/libnss_dns.so.2
-/lib/libresolv.so.2
-/etc/protocols
-/etc/imrc
-/etc/im_palette.pal
-/sbin/badblocks
-/sbin/e2fsck
-/sbin/tune2fs
-/sbin/fdisk
-/sbin/insmod
-/sbin/mke2fs
-/sbin/resize2fs
-/sbin/dumpe2fs
-/sbin/modinfo
-/usr/X11R6/lib/modules/xf86Wacom.so
-/usr/bin/bzip2
-/usr/bin/packdrake
-/usr/bin/parsehdlist
-/usr/bin/perl
-/usr/lib/gconv/BIG5.so
-/usr/lib/gconv/EUC-JP.so
-/usr/lib/gconv/libGB.so
-/usr/lib/gconv/libJIS.so
-/usr/lib/gconv/libKSC.so
-/usr/lib/gconv/EUC-KR.so
-/usr/lib/gconv/ISO8859-15.so
-/usr/lib/gconv/ISO8859-14.so
-/usr/lib/gconv/ISO8859-13.so
-/usr/lib/gconv/ISO8859-9E.so
-/usr/lib/gconv/ISO8859-9.so
-/usr/lib/gconv/ISO8859-7.so
-/usr/lib/gconv/ISO8859-5.so
-/usr/lib/gconv/ISO8859-3.so
-/usr/lib/gconv/ISO8859-2.so
-/usr/lib/gconv/ISO8859-1.so
-/usr/lib/gconv/KOI8-K.so
-/usr/lib/gconv/KOI8-U.so
-/usr/lib/gconv/KOI8-R.so
-/usr/lib/gconv/TIS-620.so
-/usr/lib/gconv/CP1251.so
-/usr/lib/gconv/GEORGIAN-PS.so
-/usr/lib/gconv/EUC-CN.so
-/usr/lib/gconv/gconv-modules
-/usr/lib/gtk/themes/engines/libpixmap.so
-/usr/lib/gtk/themes/engines/libpixmap.la
-/usr/lib/libimlib-png.so
-/usr/lib/perl5/PERL_VERSION/AutoLoader.pm
-/usr/lib/perl5/PERL_VERSION/Carp.pm
-/usr/lib/perl5/PERL_VERSION/Carp/Heavy.pm
-/usr/lib/perl5/PERL_VERSION/Exporter.pm
-/usr/lib/perl5/PERL_VERSION/Exporter/Heavy.pm
-/usr/lib/perl5/PERL_VERSION/FileHandle.pm
-/usr/lib/perl5/PERL_VERSION/SelectSaver.pm
-/usr/lib/perl5/PERL_VERSION/SelfLoader.pm
-/usr/lib/perl5/PERL_VERSION/Symbol.pm
-/usr/lib/perl5/PERL_VERSION/Time/Local.pm
-/usr/lib/perl5/PERL_VERSION/IO/Socket/INET.pm
-/usr/lib/perl5/PERL_VERSION/IO/Socket/UNIX.pm
-/usr/lib/perl5/PERL_VERSION/dumpvar.pl
-/usr/lib/perl5/PERL_VERSION/warnings.pm
-/usr/lib/perl5/PERL_VERSION/warnings/register.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/File/Glob.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/File/Glob/Glob.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Config.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Data/Dumper.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/DynaLoader.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Errno.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Fcntl.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/XSLoader.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/Fcntl/Fcntl.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/File.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/Handle.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/Seekable.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/Select.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/Socket.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Socket.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/_h2ph_pre.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/asm/unistd.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/Data/Dumper/Dumper.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/IO/IO.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/Socket/Socket.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/bits/syscall.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/sys/syscall.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/syscall.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/DynaLoader/dl_findfile.al
-/usr/lib/perl5/PERL_VERSION/lib.pm
-/usr/lib/perl5/PERL_VERSION/overload.pm
-/usr/lib/perl5/PERL_VERSION/strict.pm
-/usr/lib/perl5/PERL_VERSION/vars.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/DataStructure.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/File.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/Func.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/Globals.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/Math.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/String.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/System.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/Various.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/Cmd.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/Config.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/FTP.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/FTP/A.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/FTP/I.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/FTP/dataconn.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/Netrc.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/ARCH-linux/packdrake.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/ARCH-linux/Gtk.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/ARCH-linux/Gtk/Types.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/ARCH-linux/Gtk/Gdk/ImlibImage.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/ARCH-linux/auto/Gtk/Gtk.so
-/usr/lib/perl5/site_perl/PERL_VERSION/ARCH-linux/auto/Gtk/Gdk/ImlibImage/ImlibImage.so
-/usr/lib/rpm/rpmrc
-/usr/lib/rpm/macros
-/sbin/rescuept
-/usr/share/icons/amusement_section.xpm
-/usr/share/icons/arcade_section.xpm
-/usr/share/icons/cd_burning_section.xpm
-/usr/share/icons/chat_section.xpm
-/usr/share/icons/default_section.xpm
-/usr/share/icons/documentation_section.xpm
-/usr/share/icons/gnome.xpm
-/usr/share/icons/graphics_section.xpm
-/usr/share/icons/kde.xpm
-/usr/share/icons/multimedia_section.xpm
-/usr/share/icons/development_section.xpm
-/usr/share/icons/networking_section.xpm
-/usr/share/icons/mail_section.xpm
-/usr/share/icons/archiving_section.xpm
-/usr/share/icons/hardware_section.xpm
-/usr/share/icons/file_transfer_section.xpm
-/usr/share/icons/office_section.xpm
-/usr/share/icons/remote_access_section.xpm
-/usr/share/icons/sciences_section.xpm
-/usr/share/icons/video_section.xpm
-/usr/share/icons/windowmanager_section.xpm
-/usr/share/icons/editors_section.xpm
-/usr/share/icons/terminals_section.xpm
-/usr/share/icons/configuration_section.xpm
-/usr/share/ldetect-lst/Cards+
-/usr/share/ldetect-lst/CardsNames
-/usr/share/ldetect-lst/MonitorsDB
-/usr/share/ldetect-lst/isdn.db
-/usr/share/ldetect-lst/pcitable
-/usr/share/ldetect-lst/usbtable
-
-/sbin/pvcreate
-/sbin/pvdisplay
-/sbin/vgchange
-/sbin/vgcreate
-/sbin/vgdisplay
-/sbin/vgextend
-/sbin/vgremove
-/sbin/vgscan
-/sbin/lvcreate
-/sbin/lvdisplay
-/sbin/lvremove
diff --git a/perl-install/share/list.alpha b/perl-install/share/list.alpha
deleted file mode 100644
index 7ce1a1fee..000000000
--- a/perl-install/share/list.alpha
+++ /dev/null
@@ -1,13 +0,0 @@
-/sbin/mkraid
-/sbin/mkreiserfs
-/sbin/raidstart
-/sbin/ifport
-/sbin/mkdosfs
-/usr/X11R6/bin/XF86_FBDev
-/usr/X11R6/bin/XF86_VGA16
-/usr/X11R6/bin/XF86_3DLabs
-/usr/X11R6/bin/XF86_SVGA
-/usr/X11R6/bin/XF86_TGA
-/usr/X11R6/bin/XF86_S3
-/usr/X11R6/bin/XF86_Mach64
-/usr/X11R6/bin/xmodmap
diff --git a/perl-install/share/list.i386 b/perl-install/share/list.i386
deleted file mode 100644
index d7735f29c..000000000
--- a/perl-install/share/list.i386
+++ /dev/null
@@ -1,11 +0,0 @@
-/sbin/mkraid
-/sbin/mkreiserfs
-/sbin/mkfs.jfs
-/sbin/mkfs.xfs
-/sbin/raidstart
-/sbin/ifport
-/sbin/mkdosfs
-/sbin/resize_reiserfs
-/usr/X11R6/bin/XF86_FBDev
-/usr/X11R6/bin/XF86_VGA16
-/usr/X11R6/bin/xmodmap
diff --git a/perl-install/share/list.ia64 b/perl-install/share/list.ia64
deleted file mode 100644
index 9bbf999cb..000000000
--- a/perl-install/share/list.ia64
+++ /dev/null
@@ -1,119 +0,0 @@
-/sbin/mkraid
-/sbin/mkreiserfs
-/sbin/mkfs.xfs
-/sbin/raidstart
-/sbin/mkdosfs
-/sbin/resize_reiserfs
-/usr/bin/strace
-/var/log/XFree86.0.log
-/usr/X11R6/bin/XFree86
-/usr/X11R6/bin/xmodmap
-/usr/X11R6/lib/modules/
-/usr/X11R6/lib/modules/codeconv
-/usr/X11R6/lib/modules/codeconv/libARABIC.a
-/usr/X11R6/lib/modules/codeconv/libARMSCII8.a
-/usr/X11R6/lib/modules/codeconv/libBIG5.a
-/usr/X11R6/lib/modules/codeconv/libDOSENCODING.a
-/usr/X11R6/lib/modules/codeconv/libGB2312.a
-/usr/X11R6/lib/modules/codeconv/libGEORGIAN.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_1.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_10.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_11.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_14.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_15.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_2.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_3.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_4.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_5.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_6.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_7.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_8.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_9.a
-/usr/X11R6/lib/modules/codeconv/libJISX0201.a
-/usr/X11R6/lib/modules/codeconv/libJISX0208.a
-/usr/X11R6/lib/modules/codeconv/libJISX0212.a
-/usr/X11R6/lib/modules/codeconv/libKOI8.a
-/usr/X11R6/lib/modules/codeconv/libKSC5601.a
-/usr/X11R6/lib/modules/codeconv/libKSCJOHAB.a
-/usr/X11R6/lib/modules/codeconv/libMULEENCODING.a
-/usr/X11R6/lib/modules/codeconv/libTCVN.a
-/usr/X11R6/lib/modules/codeconv/libVISCII.a
-/usr/X11R6/lib/modules/dri
-/usr/X11R6/lib/modules/dri/gamma_dri.so
-/usr/X11R6/lib/modules/dri/i810_dri.so
-/usr/X11R6/lib/modules/dri/mga_dri.so
-/usr/X11R6/lib/modules/dri/r128_dri.so
-/usr/X11R6/lib/modules/dri/sis_dri.so
-/usr/X11R6/lib/modules/drivers
-/usr/X11R6/lib/modules/drivers/ati_drv.o
-/usr/X11R6/lib/modules/drivers/atimisc_drv.o
-/usr/X11R6/lib/modules/drivers/fbdev_drv.o
-/usr/X11R6/lib/modules/drivers/glint_drv.o
-/usr/X11R6/lib/modules/drivers/i740_drv.o
-/usr/X11R6/lib/modules/drivers/linux
-/usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
-/usr/X11R6/lib/modules/drivers/mga_drv.o
-/usr/X11R6/lib/modules/drivers/nv_drv.o
-/usr/X11R6/lib/modules/drivers/r128_drv.o
-/usr/X11R6/lib/modules/drivers/radeon_drv.o
-/usr/X11R6/lib/modules/drivers/rendition_drv.o
-/usr/X11R6/lib/modules/drivers/s3virge_drv.o
-/usr/X11R6/lib/modules/drivers/sis_drv.o
-/usr/X11R6/lib/modules/drivers/tdfx_drv.o
-/usr/X11R6/lib/modules/drivers/vga_drv.o
-/usr/X11R6/lib/modules/extensions
-/usr/X11R6/lib/modules/extensions/libGLcore.a
-/usr/X11R6/lib/modules/extensions/libdbe.a
-/usr/X11R6/lib/modules/extensions/libdri.a
-/usr/X11R6/lib/modules/extensions/libextmod.a
-/usr/X11R6/lib/modules/extensions/libglx.a
-/usr/X11R6/lib/modules/extensions/librecord.a
-/usr/X11R6/lib/modules/extensions/libxie.a
-/usr/X11R6/lib/modules/fonts
-/usr/X11R6/lib/modules/fonts/libbitmap.a
-/usr/X11R6/lib/modules/fonts/libfreetype.a
-/usr/X11R6/lib/modules/fonts/libspeedo.a
-/usr/X11R6/lib/modules/fonts/libtype1.a
-/usr/X11R6/lib/modules/fonts/libxtt.a
-/usr/X11R6/lib/modules/input
-/usr/X11R6/lib/modules/input/citron_drv.o
-/usr/X11R6/lib/modules/input/digitaledge_drv.o
-/usr/X11R6/lib/modules/input/dynapro_drv.o
-/usr/X11R6/lib/modules/input/elographics_drv.o
-/usr/X11R6/lib/modules/input/microtouch_drv.o
-/usr/X11R6/lib/modules/input/mouse_drv.o
-/usr/X11R6/lib/modules/input/mutouch_drv.o
-/usr/X11R6/lib/modules/input/spaceorb_drv.o
-/usr/X11R6/lib/modules/input/summa_drv.o
-/usr/X11R6/lib/modules/input/void_drv.o
-/usr/X11R6/lib/modules/input/wacom_drv.o
-/usr/X11R6/lib/modules/libafb.a
-/usr/X11R6/lib/modules/libcfb.a
-/usr/X11R6/lib/modules/libcfb16.a
-/usr/X11R6/lib/modules/libcfb24.a
-/usr/X11R6/lib/modules/libcfb32.a
-/usr/X11R6/lib/modules/libddc.a
-/usr/X11R6/lib/modules/libfb.a
-/usr/X11R6/lib/modules/libi2c.a
-/usr/X11R6/lib/modules/libint10.a
-/usr/X11R6/lib/modules/libmfb.a
-/usr/X11R6/lib/modules/libpcidata.a
-/usr/X11R6/lib/modules/librac.a
-/usr/X11R6/lib/modules/libramdac.a
-/usr/X11R6/lib/modules/libscanpci.a
-/usr/X11R6/lib/modules/libshadow.a
-/usr/X11R6/lib/modules/libshadowfb.a
-/usr/X11R6/lib/modules/libvbe.a
-/usr/X11R6/lib/modules/libvgahw.a
-/usr/X11R6/lib/modules/libxaa.a
-/usr/X11R6/lib/modules/libxf1bpp.a
-/usr/X11R6/lib/modules/libxf24_32bpp.a
-/usr/X11R6/lib/modules/libxf4bpp.a
-/usr/X11R6/lib/modules/libxf8_16bpp.a
-/usr/X11R6/lib/modules/libxf8_32bpp.a
-/usr/X11R6/lib/modules/linux
-/usr/X11R6/lib/modules/linux/libdrm.a
-/usr/X11R6/lib/modules/linux/libfbdevhw.a
-/usr/X11R6/lib/modules/v10002d.uc
-/usr/X11R6/lib/modules/v20002d.uc
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/asm/break.ph
diff --git a/perl-install/share/list.ppc b/perl-install/share/list.ppc
deleted file mode 100644
index 86441c399..000000000
--- a/perl-install/share/list.ppc
+++ /dev/null
@@ -1,11 +0,0 @@
-/sbin/mkraid
-/sbin/mkreiserfs
-/sbin/raidstart
-/usr/bin/hformat
-/usr/bin/hmount
-/usr/bin/humount
-/usr/bin/hattrib
-/usr/bin/hcopy
-/usr/bin/hcd
-/sbin/pdisk
-/usr/X11R6/bin/Xpmac
diff --git a/perl-install/share/list.sparc b/perl-install/share/list.sparc
deleted file mode 100644
index b597a10ce..000000000
--- a/perl-install/share/list.sparc
+++ /dev/null
@@ -1,84 +0,0 @@
-/bin/cpio
-/lib/libnss_nis.so.2
-/lib/libnss_files.so.2
-/lib/libnss_dns.so.2
-/lib/libresolv.so.2
-/etc/protocols
-/sbin/mkreiserfs
-/sbin/fdisk
-/sbin/ifport
-/sbin/insmod
-/sbin/mkraid
-/sbin/rmmod
-/sbin/mkdosfs
-/sbin/mke2fs
-/sbin/raidstart
-/sbin/losetup
-/usr/bin/genromfs
-/usr/bin/bzip2
-/usr/bin/perl
-/usr/lib/libimlib-png.so
-/usr/lib/gtk/themes/engines/libpixmap.so
-/usr/lib/gtk/themes/engines/libpixmap.la
-/usr/lib/libimlib-png.so
-/usr/lib/perl5/PERL_VERSION/AutoLoader.pm
-/usr/lib/perl5/PERL_VERSION/Carp.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/Data/Dumper.pm
-/usr/lib/perl5/PERL_VERSION/Exporter.pm
-/usr/lib/perl5/PERL_VERSION/Carp/Heavy.pm
-/usr/lib/perl5/PERL_VERSION/Exporter/Heavy.pm
-/usr/lib/perl5/PERL_VERSION/FileHandle.pm
-/usr/lib/perl5/PERL_VERSION/SelectSaver.pm
-/usr/lib/perl5/PERL_VERSION/SelfLoader.pm
-/usr/lib/perl5/PERL_VERSION/Symbol.pm
-/usr/lib/perl5/PERL_VERSION/Time/Local.pm
-/usr/lib/perl5/PERL_VERSION/dumpvar.pl
-/usr/lib/perl5/PERL_VERSION/warnings.pm
-/usr/lib/perl5/PERL_VERSION/warnings/register.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/File/Glob.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/File/Glob/Glob.bs
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/File/Glob/Glob.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/Config.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/XSLoader.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/DynaLoader.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/Fcntl.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Fcntl/Fcntl.bs
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Fcntl/Fcntl.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/IO/File.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/IO/Handle.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/IO/Seekable.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/IO/Socket.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/Socket.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/_h2ph_pre.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/asm/unistd.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/asm-sparc/unistd.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/asm-sparc64/unistd.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Data/Dumper/Dumper.bs
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Data/Dumper/Dumper.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/IO/IO.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Socket/Socket.bs
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Socket/Socket.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/bits/syscall.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/sys/syscall.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/syscall.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/DynaLoader/dl_findfile.al
-/usr/lib/perl5/PERL_VERSION/lib.pm
-/usr/lib/perl5/PERL_VERSION/overload.pm
-/usr/lib/perl5/PERL_VERSION/strict.pm
-/usr/lib/perl5/PERL_VERSION/vars.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Gtk.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Gtk/Types.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/Cmd.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/Config.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/FTP.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/FTP/A.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/FTP/I.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/FTP/dataconn.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/Netrc.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/auto/Gtk/Gtk.bs
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/auto/Gtk/Gtk.so
-/usr/lib/rpm/rpmrc
-/usr/X11R6/bin/Xsun24
-/usr/X11R6/bin/XF86_Mach64
-/usr/X11R6/bin/XF86_3DLabs
-/usr/X11R6/bin/xmodmap
diff --git a/perl-install/share/locales-skeleton.tar.bz2 b/perl-install/share/locales-skeleton.tar.bz2
deleted file mode 100644
index c760bce47..000000000
--- a/perl-install/share/locales-skeleton.tar.bz2
+++ /dev/null
diff --git a/perl-install/share/logo-mandrake.png b/perl-install/share/logo-mandrake.png
deleted file mode 100644
index f9cd57b6b..000000000
--- a/perl-install/share/logo-mandrake.png
+++ /dev/null
diff --git a/perl-install/share/makedev.sh b/perl-install/share/makedev.sh
deleted file mode 100755
index e9dccaff2..000000000
--- a/perl-install/share/makedev.sh
+++ /dev/null
@@ -1,89 +0,0 @@
-#!/bin/sh
-#
-# $Id$
-#
-# This script creates all ISDN devices under /dev .
-# Many/most distributions don't include these devices.
-
-echo -e "Creating device inodes ... \c"
-
-if [ $# = 1 ] ; then
-	DEV=$1/dev
-else
-	DEV=/dev
-fi
-
-MAJ=45
-MIN=0
-rm -f $DEV/isdnctrl* $DEV/ippp*
-while [ $MIN -lt 64 ] ; do
-	mknod -m 600 $DEV/isdn$MIN c $MAJ $MIN
-	mknod -m 660 $DEV/isdnctrl$MIN c $MAJ `expr $MIN + 64`
-	mknod -m 600 $DEV/ippp$MIN c $MAJ `expr $MIN + 128`
-	MIN=`expr $MIN + 1`
-done
-if   grep '^pppusers:' /etc/group > /dev/null
-then	# RH 5 standard
-	chgrp pppusers $DEV/isdnctrl* $DEV/ippp*
-elif grep '^dialout:' /etc/group > /dev/null
-then	# Debian/SuSE standard
-	chgrp dialout $DEV/isdnctrl* $DEV/ippp*
-fi
-rm -f $DEV/isdninfo
-mknod -m 444 $DEV/isdninfo c $MAJ 255
-ln -sf $DEV/isdnctrl0 $DEV/isdnctrl
-
-MAJ=43
-MIN=0
-rm -f $DEV/ttyI*
-while [ $MIN -lt 64 ] ; do
-	mknod -m 666 $DEV/ttyI$MIN c $MAJ $MIN
-	MIN=`expr $MIN + 1`
-done
-
-MAJ=44
-MIN=0
-rm -f $DEV/cui*
-while [ $MIN -lt 64 ] ; do
-	mknod -m 666 $DEV/cui$MIN c $MAJ $MIN
-	MIN=`expr $MIN + 1`
-done
-
-if grep '^dialout:' /etc/group > /dev/null
-then	# Debian/SuSE standard
-	chgrp dialout $DEV/ttyI* $DEV/cui*
-fi
-
-MAJ=68
-MIN=0
-rm -f $DEV/capi20*
-mknod -m 666 $DEV/capi20 c $MAJ 0
-mknod -m 666 $DEV/capi20.00 c $MAJ 1
-mknod -m 666 $DEV/capi20.01 c $MAJ 2
-mknod -m 666 $DEV/capi20.02 c $MAJ 3
-mknod -m 666 $DEV/capi20.03 c $MAJ 4
-mknod -m 666 $DEV/capi20.04 c $MAJ 5
-mknod -m 666 $DEV/capi20.05 c $MAJ 6
-mknod -m 666 $DEV/capi20.06 c $MAJ 7
-mknod -m 666 $DEV/capi20.07 c $MAJ 8
-mknod -m 666 $DEV/capi20.08 c $MAJ 9
-mknod -m 666 $DEV/capi20.09 c $MAJ 10
-mknod -m 666 $DEV/capi20.10 c $MAJ 11
-mknod -m 666 $DEV/capi20.11 c $MAJ 12
-mknod -m 666 $DEV/capi20.12 c $MAJ 13
-mknod -m 666 $DEV/capi20.13 c $MAJ 14
-mknod -m 666 $DEV/capi20.14 c $MAJ 15
-mknod -m 666 $DEV/capi20.15 c $MAJ 16
-mknod -m 666 $DEV/capi20.16 c $MAJ 17
-mknod -m 666 $DEV/capi20.17 c $MAJ 18
-mknod -m 666 $DEV/capi20.18 c $MAJ 19
-mknod -m 666 $DEV/capi20.19 c $MAJ 20
-
-if grep '^dialout:' /etc/group > /dev/null
-then	# Debian/SuSE standard
-	chgrp dialout $DEV/capi20 $DEV/capi20.??
-fi
-rm -f $DEV/isdnctrl
-ln -s $DEV/isdnctrl1 $DEV/isdnctrl
-
-echo "done."
diff --git a/perl-install/share/modparm.lst b/perl-install/share/modparm.lst
deleted file mode 100644
index d91797d20..000000000
--- a/perl-install/share/modparm.lst
+++ /dev/null
@@ -1,1229 +0,0 @@
-cumana_2:term:1-8i:1, 1, 1, 1, 1, 1, 1, 1:SCSI bus termination
-eesox:term:1-8i:1, 1, 1, 1, 1, 1, 1, 1:SCSI bus termination
-powertec:term:1-8i:1, 1, 1, 1, 1, 1, 1, 1:SCSI bus termination
-amiflop:fd_def_df0:l:0xffffffff:
-ataflop:UserSteprate:?:-1, -1:
-ataflop:UseTrackbuffer:i:-1:
-cpqarray:eisa:1-8i:0, 0 ,0 ,0, 0, 0 ,0 ,0:
-floppy:FLOPPY_DMA:i:2:
-floppy:floppy:s:0:
-floppy:FLOPPY_IRQ:i:6:
-ide-cd:ignore:s:0:
-ide:options:s:0:
-pcd:verbose:i:0:
-pcd:nice:i:0:
-pcd:major:i:46:
-pcd:drive0:1-6i:0,0,0,-1,-1,-1:
-pcd:drive1:1-6i:0,0,0,-1,-1,-1:
-pcd:drive2:1-6i:0,0,0,-1,-1,-1:
-pcd:drive3:1-6i:0,0,0,-1,-1,-1:
-pcd:name:s:"pcd":
-pd:cluster:i:64:
-pd:major:i:45:
-pd:drive0:1-8i:0,0,0,-1,0,1,-1,-1:
-pd:drive1:1-8i:0,0,0,-1,0,1,-1,-1:
-pd:drive2:1-8i:0,0,0,-1,0,1,-1,-1:
-pd:drive3:1-8i:0,0,0,-1,0,1,-1,-1:
-pd:name:s:"pd":
-pd:verbose:i:0:
-pd:nice:i:0:
-pf:cluster:i:64:
-pf:major:i:47:
-pf:drive0:1-7i:0,0,0,-1,-1,-1,-1:
-pf:drive1:1-7i:0,0,0,-1,-1,-1,-1:
-pf:drive2:1-7i:0,0,0,-1,-1,-1,-1:
-pf:drive3:1-7i:0,0,0,-1,-1,-1,-1:
-pf:name:s:"pf":
-pf:verbose:i:0:
-pf:nice:i:0:
-pg:major:i:97:
-pg:drive0:1-6i:0,0,0,-1,-1,-1:
-pg:drive1:1-6i:0,0,0,-1,-1,-1:
-pg:drive2:1-6i:0,0,0,-1,-1,-1:
-pg:drive3:1-6i:0,0,0,-1,-1,-1:
-pg:name:s:"pg":
-pg:verbose:i:0:
-pt:major:i:96:
-pt:drive0:1-6i:0,0,0,-1,-1,-1:
-pt:drive1:1-6i:0,0,0,-1,-1,-1:
-pt:drive2:1-6i:0,0,0,-1,-1,-1:
-pt:drive3:1-6i:0,0,0,-1,-1,-1:
-pt:name:s:"pt":
-pt:verbose:i:0:
-ps2esdi:track:i::
-ps2esdi:head:i:-1, -1:
-ps2esdi:cyl:i:-1,-1:
-ps2esdi:tp720esdi:i:0:
-rd:rd_size:1i:CONFIG_BLK_DEV_RAM_SIZE:Size of each RAM disk.
-xd:xd_geo:3-6i::
-xd:nodma:i:0:
-xd:xd:1-4i:-1,-1,-1,-1,:
-aztcd:azt_port:i:-1:
-cdrom:check_media_type:i:0:
-cdrom:lockdoor:i:1:
-cdrom:autoclose:i:1:
-cdrom:autoeject:i:0:
-cdrom:debug:i:0:
-cdu31a:cdu31a_irq:i:0:
-cdu31a:cdu31a_port:i:0:
-cm206:cm206_irq:i:11:
-cm206:cm206_base:i:0x340:
-cm206:auto_probe:i:1:
-cm206:cm206:1-2i:0,0:
-gscd:gscd:h::
-isp16:isp16_cdrom_base:i:0x340:
-isp16:isp16_cdrom_irq:i:0:
-isp16:isp16_cdrom_dma:i:0:
-isp16:isp16_cdrom_type:s:"Sanyo":
-mcd:mcd:1-2i::
-mcdx:mcdx:1-4i::
-optcd:optcd_port:h:0x340:
-sbpcd:sbpcd:2i:0x634 , 0:
-sjcd:sjcd_base:i:0x340:
-sonycd535:sony535_cd_base_io:i:0x340:
-atarimouse:mouse_threshold:2i:2,2:
-bttv:card:1-4i::
-bttv:vidmem:i:0:
-bttv:triton1:i:0:
-bttv:remap:1-4i::
-bttv:radio:1-4i::
-bttv:pll:1-4i:0, 0, 0, 0:
-busmouse:mouse_irq:i:5:
-buz:triton:i:0:
-buz:vidmem:i:0:
-buz:natoma:i:0:
-buz:default_norm:i:0:
-buz:v4l_bufsize:i:128:
-buz:v4l_nbufs:i:2:
-buz:default_input:i:0:
-bw-qcam:maxpoll:i:250:
-bw-qcam:yieldlines:i:4:
-bw-qcam:parport:?:0,:
-c-qcam:detect:s:0,:
-c-qcam:parport:?:0,:
-cpia_pp:parport:?:0,:'auto' or a list of parallel port numbers. Just like lp.
-cyclades:irq:?:0,:
-cyclades:maddr:?:0,:
-esp:dma:i:0:
-esp:divisor:1-8i:0,0,0,0,0,0,0,0:
-esp:flow_off:i:1016:
-esp:rx_trigger:i:768:
-esp:rx_timeout:i:128:
-esp:flow_on:i:944:
-esp:pio_threshold:i:32:
-esp:irq:1-8i:0,0,0,0,0,0,0,0:
-esp:tx_trigger:i:768:
-main:dma:i:1:dma number (>=4 for SB16/32/64/etc, <=3 for the rest)
-main:scale_tvusec:i::
-main:scale_rdtsc:i::
-main:midiio:i:0:address of midi (MPU401) port to output PTT
-main:irq:i:7:interrupt number
-main:iobase:i:0x220:io base address
-main:pario:i:0:address of parallel port to output PTT
-main:serio:i:0:address of serial port to output PTT
-main:hw:i:0:hardware type: 0=SBC, 1=WSS
-main:rdtsc_ok:i::
-i2c-old:scan:i:0:
-i2c-old:verbose:i:0:
-i2c-old:i2c_debug:i:0:
-ip2:io:?:0,:I/O ports for IntelliPort Cards
-ip2:irq:?:0,:Interrupts for IntelliPort Cards
-isicom:io:1-4i::I/O ports for the cards
-isicom:irq:1-4i::Interrupts for the cards
-istallion:board0:1-3s::Board 0 config -> name[,ioaddr[,memaddr]
-istallion:board1:1-3s::Board 1 config -> name[,ioaddr[,memaddr]
-istallion:board2:1-3s::Board 2 config -> name[,ioaddr[,memaddr]
-istallion:board3:1-3s::Board 3 config -> name[,ioaddr[,memaddr]
-joy-amiga:js_am:1-2i::
-joy-analog:js_an:2-24i::
-joy-assassin:js_as:2-24i::
-joy-console:js_console:2-6i::
-joy-console:js_console_2:2-6i::
-joy-console:js_console_3:2-6i::
-joy-db9:js_db9:2i::
-joy-db9:js_db9_2:2i::
-joy-db9:js_db9_3:2i::
-joy-lightning:js_l4:2-24i::
-joy-pci:js_pci:3-32i::
-joy-turbografx:js_tg:2-8i::
-joy-turbografx:js_tg_2:2-8i::
-joy-turbografx:js_tg_3:2-8i::
-lp:reset:i:0:
-lp:parport:?:0,:
-lp_intern:minor:i:-1:
-moxa:ttymajor:i:172:
-moxa:calloutmajor:i:173:
-moxa:baseaddr:1-4i:0, 0, 0, 0:
-moxa:verbose:i:0:
-moxa:numports:1-4i:0, 0, 0, 0:
-moxa:type:1-4i:0, 0, 0, 0:
-msbusmouse:mouse_irq:i:5:
-msp3400:debug:i:0:
-mxser:ttymajor:i:174:
-mxser:calloutmajor:i:175:
-mxser:verbose:i:0:
-mxser:ioaddr:1-4i:0, 0, 0, 0:
-n_hdlc:maxframe:i:4096:
-n_hdlc:debuglevel:i:0:
-pcxx:memsize:1-4i:0, 0, 0, 0:
-pcxx:altpin:1-4i:0, 0, 0, 0:
-pcxx:membase:1-4i:0, 0, 0, 0:
-pcxx:io:1-4i:0, 0, 0, 0:
-pcxx:verbose:i:0:
-pcxx:numports:1-4i:0, 0, 0, 0:
-pcxx:debug:i:0:
-planb:def_norm:i:VIDEO_MODE_PAL:Default startup norm (0=PAL, 1=NTSC, 2=SECAM)
-pms:io_port:i:0x250:
-pms:mem_base:i:0xC8000:
-radio-aimslab:io:i:-1:I/O address of the RadioTrack card (0x20f or 0x30f)
-radio-aztech:io:i:-1:I/O address of the Aztech card (0x350 or 0x358)
-radio-cadet:io:i:0x330:I/O address of Cadet card (0x330,0x332,0x334,0x336,0x338,0x33a,0x33c,0x33e)
-radio-gemtek:io:i:-1:I/O address of the GemTek card (0x20c, 0x30c, 0x24c or 0x34c (0x20c or 0x248 have been reported to work for the combined sound/radiocard)).
-radio-rtrack2:io:i:-1:I/O address of the RadioTrack card (0x20c or 0x30c)
-radio-sf16fmi:io:i:-1:I/O address of the SF16MI card (0x284 or 0x384)
-radio-trust:io:i:-1:I/O address of the Trust FM Radio card (0x350 or 0x358)
-radio-typhoon:mutefreq:i:0:Frequency used when muting the card (in kHz)
-radio-typhoon:io:i:-1:I/O address of the Typhoon card (0x316 or 0x336)
-radio-zoltrix:io:i:-1:I/O address of the Zoltrix Radio Plus (0x20c or 0x30c)
-rio_linux:rio_poll:i:1:
-rio_linux:rio_debug:i:0:
-rio_linux:rio_irqmask:i:-1:
-riscom8:iobase1:i:0:
-riscom8:iobase2:i:0:
-riscom8:iobase3:i:0:
-riscom8:iobase:i:0:
-rocket:support_low_speed:i:0:0 means support 50 baud, 1 means support 460400 baud
-rocket:controller:i:0:I/O port for (ISA) rocketport controller
-rocket:board1:i:0:I/O port for (ISA) board #1
-rocket:board2:i:0:I/O port for (ISA) board #2
-rocket:board3:i:0:I/O port for (ISA) board #3
-rocket:board4:i:0:I/O port for (ISA) board #4
-softdog:soft_margin:i:60:
-specialix:irq:?:0,:
-specialix:iobase:?:0,:
-stallion:board0:1-4s::Board 0 config -> name[,ioaddr[,ioaddr2][,irq]]
-stallion:board1:1-4s::Board 1 config -> name[,ioaddr[,ioaddr2][,irq]]
-stallion:board2:1-4s::Board 2 config -> name[,ioaddr[,ioaddr2][,irq]]
-stallion:board3:1-4s::Board 3 config -> name[,ioaddr[,ioaddr2][,irq]]
-sx:si_probe_addrs:i::
-sx:sx_maxints:i:100:
-sx:sx_debug:i:0:
-sx:sx_probe_addrs:i::
-sx:sx_irqmask:i:-1:
-sx:sx_slowpoll:i:0:
-sx:sx_poll:i:1:
-synclink:dma:?:0,:
-synclink:ttymajor:i:0:
-synclink:maxframe:?:0,:
-synclink:break_on_load:i:0:
-synclink:io:?:0,:
-synclink:dosyncppp:?:0,:
-synclink:irq:?:0,:
-synclink:debug_level:i:0:
-synclink:cuamajor:i:0:
-toshiba:tosh_fn:i:0:
-tuner:type:i:-1:
-tuner:debug:i:0:
-i2c-algo-bit:bit_scan:i:0:Scan for active chips on the bus
-i2c-algo-bit:bit_test:i:0:Test the lines of the bus to see if it is stuck
-i2c-algo-bit:i2c_debug:i:0:
-i2c-algo-pcf:pcf_scan:i:0:Scan for active chips on the bus
-i2c-algo-pcf:pcf_test:i:0:Test if the I2C bus is available
-i2c-algo-pcf:i2c_debug:i:1:
-i2c-core:i2c_debug:i:1:debug level
-i2c-elektor:base:i:0:
-i2c-elektor:own:i:0:
-i2c-elektor:irq:i:0:
-i2c-elektor:clock:i:0:
-i2c-elv:base:i:0:
-i2c-philips-par:base:i:0:
-i2c-piix4:force_addr:i:0:
-i2c-piix4:force:i:0:Forcibly enable the PIIX4. DANGEROUS!
-i2c-velleman:base:i:0:
-pcilynx:mem_mindma:h:2400:
-module:act_irq:i:-1:IRQ of first card (-1 = grab next free IRQ)
-module:act_bus:i:0:BusType of first card, 1=ISA, 2=MCA, 3=PCMCIA, currently only ISA
-module:membase:::Base port address of first card
-module:act_id:s:"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0":ID-String of first card
-module:act_port:i:-1:
-avm_cs:irq_list:1-10i:-1:
-b1dma:suppress_pollack:0-1i:0:
-c4:suppress_pollack:0-1i:0:
-capi:capi_rawmajor:i:190:
-capi:capi_major:i:68:
-capi:capi_ttymajor:i:191:
-capidrv:debugmode:i:0:
-kcapi:showcapimsgs:0-4i:0:
-eicon_mod:membase:i:-1:Base address of first ISA card
-eicon_mod:irq:i:-1:IRQ of first card
-eicon_mod:id:s:"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0":ID-String of first card
-config:io0:1-8i::
-config:io1:1-8i::
-config:protocol:1-8i::
-config:mem:1-8i::
-config:io:1-8i::
-config:irq:1-8i::
-config:id:s::
-config:type:1-8i::
-module:mem:?:0,:
-module:irq:?:0,:
-init:do_reset:i:0:
-init:io:1-4i:0,0,0,0:
-init:irq:1-4i:0,0,0,0:
-init:ram:1-4i:0,0,0,0:
-parport_pc:dma:?:-1 }:
-parport_pc:io:?:0 }:
-parport_pc:irq:?::
-3c501:io:i:0x280:
-3c501:irq:i:5:
-3c503:xcvr:?:0,:
-3c503:io:?:0,:
-3c503:irq:?:0,:
-3c505:dma:?:0,:
-3c505:io:?:0,:
-3c505:irq:?:0,:
-3c507:io:i:0x300:
-3c507:irq:i:0:
-3c509:xcvr:1-8i:-1, -1, -1, -1, -1, -1, -1, -1:
-3c509:irq:1-8i:-1, -1, -1, -1, -1, -1, -1, -1:
-3c509:debug:i:-1:
-3c515:rx_copybreak:i::
-3c515:full_duplex:?::
-3c515:options:?:-1, -1, -1, -1, -1, -1, -1, -1,:
-3c515:max_interrupt_work:i:20:
-3c515:debug:i:-1:
-3c523:io:?:0,:
-3c523:irq:?:0,:
-3c59x:compaq_irq:i::
-3c59x:rx_copybreak:i::
-3c59x:full_duplex:?:-1, -1, -1, -1, -1, -1, -1, -1:
-3c59x:options:?:-1, -1, -1, -1, -1, -1, -1, -1,:
-3c59x:compaq_device_id:i::
-3c59x:compaq_ioaddr:i:0, compaq_irq = 0, compaq_device_id = 0x5900:
-3c59x:max_interrupt_work:i:20:
-3c59x:debug:i::
-3c90x:flowcontrol:?:0x1,0x1,0x1,0x1,0x1,0x1,0x1,0x1:
-3c90x:full_duplex:?:-1, -1, -1, -1, -1, -1, -1, -1:
-3c90x:downpoll:?:0x8, 0x8, 0x8, 0x8, 0x8, 0x8, 0x8, 0x8:
-3c90x:media_select:?:0,:
-3c90x:switchdelay:?:0, 0, 0, 0, 0, 0, 0, 0:
-3c90x:debug:i:0x80000000:
-82596:irq:i:10:
-82596:i596_debug:i:(0x0004|(x,y)	if (i596_debug & (x)) y_PROBE):
-82596:debug:i:-1:
-ac3200:mem:?:0,:
-ac3200:io:?:0,:
-ac3200:irq:?:0,:
-acenic:rx_coal_tick:?:0,:
-acenic:trace:?:0,:
-acenic:max_tx_desc:?:0,:
-acenic:max_rx_desc:?:0,:
-acenic:tx_coal_tick:?:0,:
-acenic:link:?:0,:
-arc-rimi:device:s::
-arc-rimi:irq:i:0:
-arc-rimi:shmem:i:0x0:
-arc-rimi:node:i:0:
-arlan:mdebug:i:0:
-arlan:registrationMode:i:-1:
-arlan:numDevices:i:1:
-arlan:arlan_entry_debug:i:0:
-arlan:channelSet:i:0:
-arlan:tx_delay_ms:i:0:
-arlan:mem:i:0:
-arlan:systemId:i:-1:
-arlan:tx_queue_len:i:1:
-arlan:async:i:1:
-arlan:arlan_entry_and_exit_debug:i:0:
-arlan:arlan_debug:i:0:
-arlan:txScrambled:i:1:
-arlan:channelNumber:i:0:
-arlan:keyStart:i:0:
-arlan:SID:i:-1:
-arlan:retries:i:5:
-arlan:irq:i:0:
-arlan:arlan_exit_debug:i:0:
-arlan:radioNodeId:i:-1:
-arlan:arlan_EEPROM_bad:i:0:
-arlan:spreadingCode:i:0:
-arlan:probe:i:1:
-arlan:testMemory:i:1:
-at1700:io:i:0x260:
-at1700:net_debug:i:1:
-at1700:irq:i:0:
-atari_bionet:bionet_debug:i:0:
-atari_pamsnet:pamsnet_debug:i:0:
-atarilance:lance_debug:i:1:
-bagetlance:lance_debug:i:1:
-c101:hw:s:0:
-com20020:device:s::
-com20020:io:i:0x0:
-com20020:clock:i:0:
-com20020:backplane:i:0:
-com20020:timeout:i:3:
-com20020:irq:i:0:
-com20020:node:i:0:
-com90io:device:s::
-com90io:io:i:0x0:
-com90io:irq:i:0:
-com90xx:device:s::
-com90xx:io:i:0x0:
-com90xx:shmem:i:0:
-com90xx:irq:i:0:
-cops:io:i:0:
-cops:board_type:i:2:
-cops:irq:i:0:
-cosa:io:?:0,:The I/O bases of the COSA or SRP cards
-cosa:dma:?:0,:The DMA channels of the COSA or SRP cards
-cosa:irq:?:-1, -1, -1, -1, -1, -1, 0,:The IRQ lines of the COSA or SRP cards
-cs89x0:media:s::
-cs89x0:io:i:0:
-cs89x0:debug:i:0:
-cs89x0:irq:i:0:
-cs89x0:duplex:i:-1:
-de4x5:dec_only:i:1:
-de4x5:io:i:0x0:
-de4x5:args:s:0:
-de4x5:de4x5_debug:i:(0x0002      | 0x0001     ):
-de600:de600_debug:i:0:
-de600:delay_time:i:10:
-de620:utp:i:0:
-de620:io:i:0x378:
-de620:bnc:i:0:
-de620:irq:i:7:
-de620:de620_debug:i:0:
-de620:clone:i:0:
-depca:io:i:0x200:
-depca:irq:i:7:
-dgrs:ipxnet:i:-1:
-dgrs:ipaddr:1-4i:-1:
-dgrs:spantree:i:-1:
-dgrs:hashexpire:i:-1:
-dgrs:nicmode:i:-1:
-dgrs:debug:i:-1:
-dgrs:dma:i:-1:
-dgrs:iptrap:1-4i:-1:
-dmfe:chkmode:i:1:
-dmfe:cr6set:i:0:
-dmfe:debug:i:0:
-dmfe:mode:i:8:
-e2100:mem:?:0,:
-e2100:io:?:0,:
-e2100:xcvr:?:0,:
-e2100:irq:?:0,:
-eepro:mem:?::
-eepro:io:?::
-eepro:irq:?:0 }:
-eepro:autodetect:?::
-eepro100:rx_copybreak:i:200:
-eepro100:full_duplex:?:-1, -1, -1, -1, -1, -1, -1, -1:
-eepro100:options:?:-1, -1, -1, -1, -1, -1, -1, -1:
-eepro100:rxfifo:i:8:
-eepro100:rxdmacount:i:0:
-eepro100:debug:i:-1:
-eepro100:txfifo:i:8:
-eepro100:congenb:i:0:
-eepro100:multicast_filter_limit:i:64:
-eepro100:max_interrupt_work:i:20:
-eepro100:txdmacount:i:128:
-eexpress:io:?:0,:
-eexpress:irq:?:0,:
-epic100:rx_copybreak:i:200:
-epic100:full_duplex:?:-1, -1, -1, -1, -1, -1, -1, -1:
-epic100:options:?:-1, -1, -1, -1, -1, -1, -1, -1:
-epic100:debug:i:1:
-epic100:max_interrupt_work:i:32:
-es3210:mem:?:0,:
-es3210:io:?:0,:
-es3210:irq:?:0,:
-eth16i:debug:i:-1:eth16i debug level (0-4)
-eth16i:mediatype:?:0,:eth16i interfaceport mediatype
-eth16i:irq:?:0,:eth16i interrupt request number
-eth16i:ioaddr:?:0,:eth16i io base address
-ethertap:unit:i::
-ewrk3:io:i:0x300:
-ewrk3:irq:i:5:
-fmv18x:io:i:0x220:
-fmv18x:net_debug:i:1:
-fmv18x:irq:i:0:
-hamachi:min_tx_pkt:i:0x30:
-hamachi:force32:i:0:
-hamachi:full_duplex:?:-1, -1, -1, -1, -1, -1, -1, -1:
-hamachi:options:?:-1, -1, -1, -1, -1, -1, -1, -1:
-hamachi:rx_copybreak:i:0:
-hamachi:max_rx_latency:i:0x11:
-hamachi:tx_params:?:-1, -1, -1, -1, -1, -1, -1, -1:
-hamachi:max_rx_gap:i:0x05:
-hamachi:mtu:i:0:
-hamachi:min_pci_latency:i:64:
-hamachi:debug:i:1:
-hamachi:rx_params:?:-1, -1, -1, -1, -1, -1, -1, -1:
-hamachi:min_rx_pkt:i:0x18:
-hamachi:max_tx_gap:i:0x00:
-hamachi:max_tx_latency:i:0x00:
-hamachi:max_interrupt_work:i:40:
-baycom_epp:iobase:i:0x378,:baycom io base address
-baycom_epp:mode:s::baycom operating mode; epp
-baycom_par:iobase:?:0x378,:baycom io base address
-baycom_par:mode:?::baycom operating mode; eg. par96 or picpar
-baycom_ser_fdx:baud:?:1200 }:baycom baud rate (300 to 4800)
-baycom_ser_fdx:iobase:?:0x3f8,:baycom io base address
-baycom_ser_fdx:irq:?:4,:baycom irq number
-baycom_ser_fdx:mode:?:"ser12*",:baycom operating mode; * for software DCD
-baycom_ser_hdx:iobase:?:0x3f8,:baycom io base address
-baycom_ser_hdx:irq:?:4,:baycom irq number
-baycom_ser_hdx:mode:?:"ser12*",:baycom operating mode; * for software DCD
-dmascc:io:?:dev->base_addr:
-mkiss:ax25_maxdev:i:16:number of MKISS devices
-sm:iobase:i:-1:soundmodem base address
-sm:dma:i:-1:soundmodem dma channel
-sm:dma2:i:-1:soundmodem 2nd dma channel; full duplex only
-sm:midiio:i:0:soundmodem PTT output on midi port
-sm:irq:i:-1:soundmodem interrupt
-sm:pario:i:0:soundmodem PTT output on parallel port
-sm:serio:i:0:soundmodem PTT output on serial port
-sm:mode:s:0:soundmodem operating mode; eg. sbc:afsk1200 or wss:fsk9600
-hostess_sv11:io:i:0x200:The I/O base of the Comtrol Hostess SV11 card
-hostess_sv11:dma:i::Set this to 1 to use DMA1/DMA3 for TX/RX
-hostess_sv11:irq:i:9:The interrupt line setting for the Comtrol Hostess SV11 card
-hp-plus:io:?:0,:
-hp-plus:irq:?:0,:
-hp:io:?:0,:
-hp:irq:?:0,:
-hp100:hp100_name:?:"", "", "", "", "":
-hp100:hp100_port:1-5i:0, -1, -1, -1, -1:
-ibmtr:mem:?:0,0:
-ibmtr:io:?:0xa20,0xa24:
-ibmtr:irq:?:0,0:
-ipddp:ipddp_mode:i:2:
-irport:io:1-4i:~0, ~0, ~0, ~0:
-irport:irq:1-4i:0, 0, 0, 0:
-irtty:qos_mtt_bits:i:0x03:
-nsc-ircc:io:1-4i:~0, ~0, ~0, ~0:
-nsc-ircc:dongle_id:i:0:
-nsc-ircc:dma:1-4i:0, 0, 0, 0, 0:
-nsc-ircc:qos_mtt_bits:i:0x07:
-nsc-ircc:irq:1-4i:0, 0, 0, 0, 0:
-nsc_fir:io:1-4i:0x2f8, 0x2f8, 0x2f8, 0x2f8, 0x2f8:
-nsc_fir:dongle_id:i:0:
-nsc_fir:io2:1-4i:0x150, 0x398, 0xea, 0x15c, 0x2e:
-nsc_fir:qos_mtt_bits:i:0x07:
-nsc_fir:irq:1-4i:3, 3, 3, 3, 3:
-smc-ircc:ircc_dma:1i:255:
-smc-ircc:ircc_irq:1i:255:
-toshoboe:max_baud:i:4000000:
-w83977af_ir:io:1-4i:0x180, ~0, ~0, ~0:
-w83977af_ir:io2:1-4i::
-w83977af_ir:qos_mtt_bits:i:0x07:
-w83977af_ir:irq:1-4i:11, 0, 0, 0:
-lance:io:?:0,:
-lance:dma:?:dmas[i]:
-lance:irq:?:0,:
-lanstreamer:pkt_buf_sz:?:0,:
-lanstreamer:ringspeed:?:0,:
-lne390:mem:?:0,:
-lne390:io:?:0,:
-lne390:irq:?:0,:
-ltpc:io:i:0:
-ltpc:debug:i:0:
-ltpc:dma:i:0:
-ltpc:irq:i:0:
-n2:hw:s:0:
-ncr885e:debug:i:1:
-ne:probe_pci:i:1:
-ne:io:?:0,:
-ne:bad:?:0,:
-ne:irq:?:0,:
-ne2:io:?:0,:
-ne2:bad:?:0,:
-ne2:irq:?:0,:
-ne3210:mem:?:0,:
-ne3210:io:?:0,:
-ne3210:irq:?:0,:
-ni5010:io:i:0:
-ni5010:irq:i:0:
-ni52:io:i:0x300:
-ni52:irq:i:9:
-ni52:memend:l:0:
-ni52:memstart:l:0:
-ni65:io:i:0:
-ni65:dma:i:0:
-ni65:irq:i:0:
-old_tulip:full_duplex:?:0,:
-old_tulip:options:?:0,:
-old_tulip:rx_copybreak:i:100:
-old_tulip:debug:i:-1:
-old_tulip:reverse_probe:i:0:
-old_tulip:max_interrupt_work:i:25:
-olympic:message_level:?:0,:
-olympic:pkt_buf_sz:?:0,:
-olympic:ringspeed:?:0,:
-pcnet32:full_duplex:?:0,:
-pcnet32:options:?:0,:
-pcnet32:rx_copybreak:i::
-pcnet32:tx_start_pt:i:-1:
-pcnet32:debug:i:-1:
-pcnet32:max_interrupt_work:i::
-plip:parport:?:-1 }:
-plip:timid:1i:0:
-ppp:flag_time:i:0:
-rl100a:full_duplex:?:-1, -1, -1, -1, -1, -1, -1, -1:
-rl100a:options:?:-1, -1, -1, -1, -1, -1, -1, -1:
-rl100a:rx_copybreak:i:0:
-rl100a:min_pci_latency:i:32:
-rl100a:debug:i:1:
-rl100a:multicast_filter_limit:i:32:
-rl100a:max_interrupt_work:i:20:
-rtl8139:full_duplex:?:-1, -1, -1, -1, -1, -1, -1, -1:
-rtl8139:options:?:-1, -1, -1, -1, -1, -1, -1, -1:
-rtl8139:debug:i::
-rtl8139:max_interrupt_work:i:20:
-rtl8139:multicast_filter_limit:i:32:
-sb1000:io:1-2i:0, 0:
-sb1000:irq:i:0:
-sbni:baud:?:0:
-sbni:io:?:0:
-sbni:mac:?:0:
-sbni:irq:?:0:
-sbni:rxl:?:-1, -1, -1, -1, -1, -1, -1, -1:
-sealevel:io:i:0x238:The I/O base of the Sealevel card
-sealevel:rxdma:i:3:Receive DMA channel
-sealevel:slow:i:0:Set this for an older Sealevel card such as the 4012
-sealevel:irq:i:5:The interrupt line setting for the SeaLevel card
-sealevel:txdma:i:1:Transmit DMA channel
-seeq8005:io:i:0x320:
-seeq8005:irq:i:10:
-sis900:debug:i::
-sis900:max_interrupt_work:i:20:
-sis900:multicast_filter_limit:i:128:
-skge:FlowCtrl_A:?:"",:
-skge:AutoNeg_B:?:"",:
-skge:FlowCtrl_B:?:"",:
-skge:options:?:0,:
-skge:Role_A:?:"",:
-skge:Role_B:?:"",:
-skge:DupCap_A:?:"",:
-skge:DupCap_B:?:"",:
-skge:debug:i:0:
-skge:PrefPort:?:"",:
-skge:RlmtMode:?:"",:
-skge:AutoNeg_A:?:"",:
-sktr:rate:?:16	,:
-sktr:io:?:0,:
-sktr:dma:?:0,:
-sktr:irq:?:0,:
-slip:slip_maxdev:i:256:
-smc-mca:io:?:0,:
-smc-mca:irq:?:0,:
-smc-ultra:io:?:0,:
-smc-ultra:irq:?:0,:
-smc9194:io:i:0:
-smc9194:ifport:i:0:
-smc9194:irq:i:0:
-syncppp:debug:1i:0:
-tlan:speed:i:0:
-tlan:debug:i:0:
-tlan:sa_int:i:0:
-tlan:duplex:i:0:
-tlan:aui:i:0:
-tulip:csr0:i:0x00A00000 | 0x4800:
-tulip:full_duplex:?:0,:
-tulip:options:?:0,:
-tulip:rx_copybreak:i:100:
-tulip:debug:i::
-tulip:reverse_probe:i:0:
-tulip:max_interrupt_work:i:25:
-via-rhine:full_duplex:?:-1, -1, -1, -1, -1, -1, -1, -1:
-via-rhine:options:?:-1, -1, -1, -1, -1, -1, -1, -1:
-via-rhine:rx_copybreak:i:0:
-via-rhine:min_pci_latency:i:64:
-via-rhine:debug:i:1:
-via-rhine:max_interrupt_work:i:20:
-wd:mem:?:0,:
-wd:io:?:0,:
-wd:irq:?:0,:
-wd:mem_end:?:0,:
-x25_asy:x25_asy_maxdev:i:256:
-yellowfin:full_duplex:?:-1, -1, -1, -1, -1, -1, -1, -1:
-yellowfin:options:?:-1, -1, -1, -1, -1, -1, -1, -1:
-yellowfin:rx_copybreak:i:0:
-yellowfin:mtu:i:0:
-yellowfin:min_pci_latency:i:64:
-yellowfin:debug:i:-1:
-yellowfin:max_interrupt_work:i:20:
-dasd:dasd_force_mdsk:?::
-dasd:dasd:?::
-xpram:devs:i:1:
-xpram:sizes:?:0,:
-dbri:dbri_debug:i:0:
-dbri:dbri_trace:i:0:
-aurora:irq1:i:0:
-aurora:irq2:i:0:
-aurora:irq3:i:0:
-aurora:irq:i:0:
-BusLogic:BusLogic_Options:s::
-aha152x:aha152x:1-8i::
-aha152x:aha152x1:1-8i::
-aha1542:aha1542:1-4i:0x330, 11, 4, -1:
-aic7xxx:aic7xxx:s:0:
-atari_scsi:setup_cmd_per_lun:i:-1:
-atari_scsi:setup_can_queue:i:-1:
-atari_scsi:setup_sg_tablesize:i:-1:
-atari_scsi:setup_hostid:i:-1:
-atari_scsi:setup_use_tagged_queuing:i:-1:
-dc395x_trm:dc395x_trm:1-6i::Host SCSI ID, Speed (0=20MHz), Device Flags, Adapter Flags, Max Tags (log2(tags)-1), DelayReset (s)
-eata:linked_comm:i:0:
-eata:io_port:?::
-eata:rev_scan:i:1:
-eata:use_new_eh_code:i:1:
-eata:link_statistics:i:0:
-eata:ext_tran:i:0:
-eata:tag_mode:i:0:
-eata:boot_options:s:0:
-eata:max_queue_depth:i:2:
-eata:tagged_comm:i:0:
-fdomain:fdomain:2-3i:0, 0, 0:
-g_NCR5380:ncr_53c400a:i:0:
-g_NCR5380:ncr_dma:i:0:
-g_NCR5380:ncr_5380:i:0:
-g_NCR5380:ncr_addr:i:0:
-g_NCR5380:ncr_irq:i:0:
-g_NCR5380:dtc_3181e:i:0:
-g_NCR5380:ncr_53c400:i:0:
-gdth:max_ids:i:127:
-gdth:reserve_list:?::
-gdth:disable:i::
-gdth:reverse_scan:i:0:
-gdth:reserve_mode:i:1:
-gdth:irq:i::
-gdth:rescan:i:0:
-gdth:hdr_channel:i:0:
-ibmmca:scsi_id:?:7, 7, 7, 7, 7, 7, 7, 7:
-ibmmca:display:1i::
-ibmmca:ansi:1i::
-ibmmca:normal:1i::
-ibmmca:io_port:?:0, 0, 0, 0, 0, 0, 0, 0:
-ibmmca:adisplay:1i::
-ibmmca:bypass:1i::
-in2000:setup_strings:s:0:
-megaraid:megaraid:s::
-ncr53c8xx:ncr53c8xx:s:0:
-pas16:pas16_irq:i:0:
-pas16:pas16_addr:h:0:
-scsi:max_scsi_luns:i:1:
-seagate:controller_type:b:0:
-seagate:base_address:i:0:
-seagate:irq:i:5:
-sim710:sim710:s::
-sr:xa_test:i::
-st:write_threshold_kbs:i:0:
-st:max_sg_segs:i:0:
-st:max_buffers:i:0:
-st:buffer_kbs:i:0:
-sym53c416:sym53c416:1-2i::
-sym53c416:sym53c416_1:1-2i::
-sym53c416:sym53c416_2:1-2i::
-sym53c416:sym53c416_3:1-2i::
-sym53c8xx:sym53c8xx:s:0:
-tmscsim:tmscsim:1-6i::Host SCSI ID, Speed (0=10MHz), Device Flags, Adapter Flags, Max Tags (log2(tags)-1), DelayReset (s)
-u14-34f:have_old_firmware:i:0:
-u14-34f:linked_comm:i:0:
-u14-34f:io_port:?::
-u14-34f:use_new_eh_code:i:1:
-u14-34f:link_statistics:i:0:
-u14-34f:ext_tran:i:0:
-u14-34f:boot_options:s:0:
-u14-34f:max_queue_depth:i:2:
-wd33c93:setup_strings:s:0:
-eeprom:checksum:i:0:
-ad1816:options:i:0:
-ad1816:io:i:-1:
-ad1816:ad1816_clockfreq:i:33000:
-ad1816:dma:i:-1:
-ad1816:dma2:i:-1:
-ad1816:irq:i:-1:
-ad1848:deskpro_m:i:0:
-ad1848:io:i:-1:
-ad1848:deskpro_xl:i:0:
-ad1848:type:i:0:
-ad1848:dma:i:-1:
-ad1848:soundpro:i:0:
-ad1848:dma2:i:-1:
-ad1848:irq:i:-1:
-adlib_card:io:i:-1:
-cmpci:mpu_io:i:0:
-cmpci:rear_out:i:0:
-cmpci:four_ch:i:0:
-cmpci:synth_io:i:0:
-cmpci:spdif_loop:i:0:
-cs4232:synthio:i:-1:
-cs4232:io:i:-1:
-cs4232:synthirq:i:-1:
-cs4232:dma:i:-1:
-cs4232:mpuio:i:-1:
-cs4232:mpuirq:i:-1:
-cs4232:dma2:i:-1:
-cs4232:irq:i:-1:
-dmasound:bufSize:i::
-dmasound:catchRadius:i:0, numBufs = 4, bufSize = 32:
-dmasound:numBufs:i::
-es1370:joystick:?:0,:if 1 enables joystick interface (still need separate driver)
-es1370:lineout:?:0,:if 1 the LINE input is converted to LINE out
-es1370:micbias:?:0,:sets the +5V bias for an electret microphone
-es1371:joystick:?:0,:sets address and enables joystick interface (still need separate driver)
-es1371:spdif:?:0,:if 1 the output is in S/PDIF digital mode
-gus_card:io:i:-1:
-gus_card:no_wave_dma:i:0:
-gus_card:type:i:0:
-gus_card:dma16:i:-1:
-gus_card:dma:i:-1:
-gus_card:gus16:i:0:
-gus_card:db16:i:0:
-gus_card:irq:i:-1:
-i810_audio:ftsodell:i:0:
-i810_audio:clocking:i:48000:
-aci:aci_reset:i:1:
-aedsp16:mpu_base:i:-1:MPU-401 I/O base address (0x300 0x310 0x320 0x330)
-aedsp16:mpu_irq:i:-1:MPU-401 IRQ line (5 7 9 10 0)
-aedsp16:io:i:-1:I/O base address (0x220 0x240)
-aedsp16:mss_base:i:-1:MSS emulation I/O base address (0x530 0xE80)
-aedsp16:dma:i:-1:dma line (0 1 3)
-aedsp16:irq:i:-1:IRQ line (5 7 9 10 11)
-awe_wave:io:i:0:base i/o port of Emu8000
-awe_wave:memsize:i:-1:onboard DRAM size in Kbytes
-mad16:opl4:i:0:
-mad16:mpu_io:i:0:
-mad16:joystick:i:0:
-mad16:io:i:-1:
-mad16:mpu_irq:i:0:
-mad16:debug:i:0:
-mad16:dma16:i:-1:
-mad16:dma:i:-1:
-mad16:cddma:i:-1:
-mad16:cdtype:i:0:
-mad16:irq:i:-1:
-mad16:cdport:i:0x340:
-mad16:cdirq:i:0:
-maestro:dsps_order:i:0:
-maestro:use_pm:i:2:
-maestro:debug:i:0:
-maui:io:i:-1:
-maui:irq:i:-1:
-mpu401:io:i:-1:
-mpu401:irq:i:-1:
-msnd_pinnacle:calibrate_signal:i::
-msnd_pinnacle:major:i::
-msnd_pinnacle:mpu_io:i::
-msnd_pinnacle:cfg:i::
-msnd_pinnacle:mpu_irq:i::
-msnd_pinnacle:mem:i::
-msnd_pinnacle:io:i::
-msnd_pinnacle:ide_io0:i::
-msnd_pinnacle:ide_io1:i::
-msnd_pinnacle:write_ndelay:i::
-msnd_pinnacle:ide_irq:i::
-msnd_pinnacle:reset:i::
-msnd_pinnacle:fifosize:i::
-msnd_pinnacle:digital:i::
-msnd_pinnacle:irq:i::
-msnd_pinnacle:joystick_io:i::
-nm256_audio:force_load:i:0:
-nm256_audio:buffertop:i:0:
-nm256_audio:usecache:i:0:
-nm256_audio:nm256_debug:i:0:
-opl3:io:i:-1:
-opl3sa:mpu_io:i:-1:
-opl3sa:mpu_irq:i:-1:
-opl3sa:io:i:-1:
-opl3sa:dma:i:-1:
-opl3sa:dma2:i:-1:
-opl3sa:irq:i:-1:
-opl3sa2:mpu_io:i:-1:Set MIDI I/O base (0x330 or other. Address must be on 4 location boundaries and must be from 0x300 to 0x334)
-opl3sa2:io:i:-1:Set i/o base of OPL3-SA2 or SA3 card (usually 0x370)
-opl3sa2:mss_io:i:-1:Set MSS (audio) I/O base (0x530, 0xE80, or other. Address must end in 0 or 4 and must be from 0x530 to 0xF48)
-opl3sa2:mss_irq:::Set MSS (audio) IRQ (5, 7, 9, 10, 11, 12)
-opl3sa2:dma:i:-1:Set MSS (audio) first DMA channel (0, 1, 3)
-opl3sa2:dma2:i:-1:Set MSS (audio) second DMA channel (0, 1, 3)
-opl3sa2:irq:i:-1:
-pas2_card:symphony:i:0:
-pas2_card:broken_bus_clock:i:0:
-pas2_card:joystick:i:1:
-pas2_card:io:i:-1:
-pas2_card:dma16:i:-1:
-pas2_card:dma:i:-1:
-pas2_card:sb_dma:i:-1:
-pas2_card:sb_io:i:0:
-pas2_card:sb_dma16:i:-1:
-pas2_card:irq:i:-1:
-pas2_card:sb_irq:i:-1:
-pss:pss_enable_joystick:i:0:Enables the PSS joystick port (1 to enable, 0 to disable)
-pss:mpu_io:i:-1:Set MIDI i/o base (0x330 or other. Address must be on 4 location boundaries and must be from 0x100 to 0xFFC)
-pss:mss_dma:i:-1:Set WSS (audio) DMA (0, 1, 3)
-pss:pss_keep_settings:i:1:Keep hardware setting at driver unloading (0 - no, 1 - yes)
-pss:mpu_irq:i:-1:Set MIDI IRQ (3, 5, 7, 9, 10, 11, 12)
-pss:pss_cdrom_port:i:-1:Set the PSS CDROM port i/o base (0x340 or other)
-pss:mss_io:i:-1:Set WSS (audio) i/o base (0x530, 0x604, 0xE80, 0xF40, or other. Address must end in 0 or 4 and must be from 0x100 to 0xFF4)
-pss:pss_mixer:b:0:Enable (1) or disable (0) PSS mixer (controlling of output volume, bass, treble, synth volume). The mixer is not available on all PSS cards.
-pss:mss_irq:i:-1:Set WSS (audio) IRQ (3, 5, 7, 9, 10, 11, 12)
-pss:pss_firmware:s:"/etc/sound/pss_synth":Location of the firmware file (default - /etc/sound/pss_synth)
-pss:pss_no_sound:i:0:Configure sound compoents (0 - no, 1 - yes)
-pss:pss_io:i:-1:Set i/o base of PSS card (probably 0x220 or 0x240)
-sb_card:mpu_io:i:0:
-sb_card:pas2:i:0:
-sb_card:io:i:-1:
-sb_card:esstype:i::
-sb_card:type:i:0:
-sb_card:dma16:i:-1:
-sb_card:support:i:0:
-sb_card:dma:i:-1:
-sb_card:sm_games:i:0:
-sb_card:mad16:i:0:
-sb_card:irq:i:-1:
-sb_card:trix:i:0:
-sgalaxy:io:i:-1:
-sgalaxy:dma:i:-1:
-sgalaxy:dma2:i:-1:
-sgalaxy:irq:i:-1:
-sgalaxy:sgbase:i:-1:
-sonicvibes:reverb:?:0,:if 1 enables the reverb circuitry. NOTE: your card must have the reverb RAM
-sonicvibes:wavetable:?:0,:if 1 the wavetable synth is enabled
-sonicvibes:dmaio:i:0xac00:if the motherboard BIOS did not allocate DDMA io, allocate them starting at this address
-soundcard:dmabuf:i:0:
-soundcard:traceinit:i:0:
-sscape:mpu_io:i:-1:
-sscape:mpu_irq:i:-1:
-sscape:io:i:-1:
-sscape:mss:i:0:
-sscape:dma:i:-1:
-sscape:spea:i:-1:
-sscape:irq:i:-1:
-trix:mpu_io:i:-1:
-trix:joystick:i:0:
-trix:mpu_irq:i:-1:
-trix:io:i:-1:
-trix:dma:i:-1:
-trix:sb_dma:i:-1:
-trix:sb_io:i:-1:
-trix:dma2:i:-1:
-trix:irq:i:-1:
-trix:sb_irq:i:-1:
-uart401:io:i:-1:
-uart401:irq:i:-1:
-uart6850:io:i:-1:
-uart6850:irq:i:-1:
-waveartist:io:i:CONFIG_WAVEARTIST_BASE:
-waveartist:dma:i:CONFIG_WAVEARTIST_DMA:
-waveartist:dma2:i:CONFIG_WAVEARTIST_DMA2:
-waveartist:irq:i:CONFIG_WAVEARTIST_IRQ:
-wavfront:ospath:s:"/etc/sound/wavefront.os":
-wavfront:debug_default:i:0:
-wavfront:io:i:-1:
-wavfront:wf_raw:i:0:
-wavfront:sleep_tries:i:50:
-wavfront:sleep_interval:i:100:
-wavfront:ramcheck_time:i:20:
-wavfront:irq:i:-1:
-wavfront:reset_time:i:2:
-wavfront:wait_usecs:i:150:
-wavfront:fx_raw:i:1:
-wavfront:osrun_time:i:10:
-ymf_sb:spdif_out:i:0:
-ymf_sb:mpu_io:i:0x330:
-ymf_sb:io:i:0x220:
-ymf_sb:master_vol:i:80:
-ymf_sb:dma:i:1:
-ymf_sb:synth_io:i:0x388:
-ixj:dspio:?::
-ixj:ixjdebug:i:0:
-ixj:pc_debug:i:PCMCIA_DEBUG:
-ixj:xio:?::
-dabusb:buffers:i:0:
-ibmcam:init_hue:i:128:
-ibmcam:flags:i:0:
-ibmcam:init_color:i:128:
-ibmcam:init_contrast:i:192:
-ibmcam:framerate:i:2:
-ibmcam:sharpness:i:4:
-ibmcam:init_model2_sat:i:-1:
-ibmcam:debug:i:0:
-ibmcam:init_model2_rg:i:-1:
-ibmcam:videosize:i:VIDEOSIZE_352x288:
-ibmcam:init_model2_rg2:i:-1:
-ibmcam:hue_correction:i:128:
-ibmcam:lighting:i:1:
-ibmcam:init_model2_yb:i:-1:
-ibmcam:init_brightness:i:128:
-ov511:sensor:i:0:
-ov511:snapshot:i:0:
-ov511:aperture:i:-1:
-ov511:i2c_detect_tries:i:5:
-ov511:autoadjust:i:1:
-ov511:fix_rgb_offset:i:0:
-ov511:debug:i:3:
-ov511:force_rgb:i:0:
-pegasus:loopback:i:0:
-usbserial:vendor:i:0x05f9:User specified USB idVendor
-usbserial:product:i:0xffff:User specified USB idProduct
-uhci:debug:i:1:
-atyfb:noaccel:i::Do not use accelerating engine (0 or 1=disabled) (default=0)
-atyfb:vmode:i:0:Specify the vmode mode number that should be used (640x480 default)
-atyfb:blink:i:1:Enables hardware cursor blinking (0 or 1) (default=1)
-atyfb:cmode:i:-1:Specify the video depth that should be used (8bit default)
-matroxfb:hslen:i:0:Horizontal sync length (px), overrides hslen from vesa (default=vesa)
-matroxfb:xres:i:0:Horizontal resolutioni (px), overrides xres from vesa (default=vesa)
-matroxfb:noaccel:i:0:Do not use accelerating engine (0 or 1=disabled) (default=0)
-matroxfb:sync:i:-1:Sync polarity, overrides sync from vesa (default=vesa)
-matroxfb:novga:i:0:VGA I/O (0x3C0-0x3DF) disabled (0 or 1=disabled) (default=0)
-matroxfb:yres:i:0:Vertical resolution (scans), overrides yres from vesa (default=vesa)
-matroxfb:pixclock:i:0:Pixelclock (ns), overrides pixclock from vesa (default=vesa)
-matroxfb:upper:i:~0:Upper blank space (scans), overrides upper from vesa (default=vesa)
-matroxfb:right:i:~0:Right blank space (px), overrides right from vesa (default=vesa)
-matroxfb:vslen:i:0:Vertical sync length (scans), overrides lower from vesa (default=vesa)
-matroxfb:noinit:i:1:Disables W/SG/SD-RAM and bus interface initialization (0 or 1=do not initialize) (default=0)
-matroxfb:nobios:i:0:Disables ROM BIOS (0 or 1=disabled) (default=do not change BIOS state)
-matroxfb:mem:i:0:Size of available memory in MB, KB or B (2,4,8,12,16MB, default=autodetect)
-matroxfb:hwcursor:i:1:Enables hardware cursor (0 or 1) (default=0)
-matroxfb:fv:i:0:
-matroxfb:disabled:i:0:Disabled (0 or 1=disabled), meaningless for module (default=0)
-matroxfb:cross4MB:i:-1:Specifies that 4MB boundary can be in middle of line. (default=autodetected)
-matroxfb:lower:i:~0:Lower blank space (scans), overrides lower from vesa (default=vesa)
-matroxfb:vmode:i:simple_strtoul(this_opt+6, 0, 0):Specify the vmode mode number that should be used (640x480 default)
-matroxfb:blink:i:1:Enables hardware cursor blinking (0 or 1) (default=1)
-matroxfb:left:i:~0:Left blank space (px), overrides left from vesa (default=vesa)
-matroxfb:inv24:i:0:Inverts clock polarity for 24bpp and loop frequency > 100MHz (default=do not invert polarity)
-matroxfb:cmode:i:simple_strtoul(this_opt+6, 0, 0):Specify the video depth that should be used (8bit default)
-matroxfb:inverse:i:0:Inverse (0 or 1) (default=0)
-matroxfb:sgram:i:0:Indicates that G200/G400 has SGRAM memory (0=SDRAM, 1=SGRAM) (default=0)
-matroxfb:nopan:i:0:Disable pan on startup (0 or 1=disabled) (default=0)
-matroxfb:maxclk:i:0:Startup maximal clock, 0-999MHz, 1000-999999kHz, 1000000-INF Hz
-matroxfb:no_pci_retry:i:0:PCI retries enabled (0 or 1=disabled) (default=0)
-matroxfb:grayscale:i:0:Sets display into grayscale. Works perfectly with paletized videomode (4, 8bpp), some limitations apply to 16, 24 and 32bpp videomodes (default=nograyscale)
-matroxfb:mtrr:i:1:This speeds up video memory accesses (0=disabled or 1) (default=1)
-matroxfb:dev:i:-1:Multihead support, attach to device ID (0..N) (default=first working)
-matroxfb:depth:i:-1:Color depth (0=text,8,15,16,24,32) (default=vesa)
-matroxfb:fh:i:0:Startup horizontal frequency, 0-999kHz, 1000-INF Hz
-matroxfb:vesa:i:~0:Startup videomode (0x000-0x1FF) (default=0x101)
-matroxfb:fastfont:i:0:Specifies, how much memory should be used for font data (0, 1024-65536 are reasonable) (default=0)
-mdacon:mda_first_vc:1-255i:13:
-mdacon:mda_last_vc:1-255i:16:
-pm2fb:mode:s:0:
-vfb:videomemorysize:l::
-svc:nlm_timeout:3-20l:10:
-svc:nlm_grace_period:10-240l:0:
-fs:ntdebug:i::Debug level
-emulate:sco_serial:1-10s::SCO Serial Number
-emulate:ibcs_trace:i:0:iBCS debug trace
-ip_masq_autofw:debug:i:0:
-ip_masq_cuseeme:ports:?:7648:
-ip_masq_cuseeme:debug:i:0:
-ip_masq_ftp:ports:?:21:
-ip_masq_ftp:debug:i:0:
-ip_masq_ftp:noport:?:6000, 0:
-ip_masq_irc:ports:?:6667:
-ip_masq_irc:debug:i:0:
-ip_masq_mfw:debug:i:0:
-ip_masq_portfw:debug:i:0:
-ip_masq_raudio:ports:?:554, 7070, 0:
-ip_masq_raudio:debug:i:0:
-ip_masq_user:ports:?::
-ip_masq_user:debug:i:0:
-ip_masq_vdolive:ports:?:7000:
-ip_masq_vdolive:debug:i:0:
-af_inet6:unloadable:i:0:
-irlan_common:eth:i:0:
-irlan_common:timeout:i::
-irlan_common:access:i:2:
-irmod:irda_debug:1l:0:
-af_netrom:nr_ndevs:i:4:number of NET/ROM devices
-af_rose:rose_ndevs:i:10:number of ROSE devices
-3c574_cs:full_duplex:i:0:
-3c574_cs:pc_debug:i:PCMCIA_DEBUG:
-3c574_cs:irq_list:1-4i:-1:
-3c574_cs:irq_mask:i:0xdeb8:
-3c574_cs:max_interrupt_work:i:32:
-3c575_cb:use_hw_csums:i:1:
-3c575_cb:rx_copybreak:i::
-3c575_cb:full_duplex:?:-1, -1, -1, -1, -1, -1, -1, -1:
-3c575_cb:options:?:-1, -1, -1, -1, -1, -1, -1, -1,:
-3c575_cb:debug:i:1:
-3c575_cb:max_interrupt_work:i:32:
-3c589_cs:irq_list:1-4i:-1:
-3c589_cs:pc_debug:i:PCMCIA_DEBUG:
-3c589_cs:irq_mask:i:0xdeb8:
-3c589_cs:if_port:i:0:
-aha152x_stub:irq_list:1-4i:-1:
-aha152x_stub:pc_debug:i:PCMCIA_DEBUG:
-aha152x_stub:irq_mask:i:0xdeb8:
-aha152x_stub:host_id:i:7:
-aha152x_stub:ext_trans:i:0:
-aha152x_stub:synchronous:i:0:
-aha152x_stub:reset_delay:i:100:
-aha152x_stub:parity:i:1:
-aha152x_stub:reconnect:i:1:
-apa1480_stub:pc_debug:i:PCMCIA_DEBUG:
-apa1480_stub:ultra:i:0:
-apa1480_stub:reset:i:1:
-dummy_cs:free_ports:i:0:
-dummy_cs:irq_list:1-4i:-1:
-dummy_cs:pc_debug:i:PCMCIA_DEBUG:
-dummy_cs:irq_mask:i:0xdeb8:
-eepro100_cb:rx_copybreak:i:200:
-eepro100_cb:full_duplex:?:-1, -1, -1, -1, -1, -1, -1, -1:
-eepro100_cb:options:?:-1, -1, -1, -1, -1, -1, -1, -1:
-eepro100_cb:rxfifo:i:8:
-eepro100_cb:rxdmacount:i:0:
-eepro100_cb:debug:i:1:
-eepro100_cb:txfifo:i:8:
-eepro100_cb:congenb:i:0:
-eepro100_cb:multicast_filter_limit:i:3:
-eepro100_cb:max_interrupt_work:i:20:
-eepro100_cb:txdmacount:i:128:
-epic_cb:rx_copybreak:i:200:
-epic_cb:full_duplex:?:-1, -1, -1, -1, -1, -1, -1, -1:
-epic_cb:options:?:-1, -1, -1, -1, -1, -1, -1, -1:
-epic_cb:debug:i:1:
-epic_cb:max_interrupt_work:i:32:
-fdomain_stub:irq_list:1-4i:-1:
-fdomain_stub:pc_debug:i:PCMCIA_DEBUG:
-fdomain_stub:irq_mask:i:0xdeb8:
-fmvj18x_cs:irq_list:1-4i:-1:
-fmvj18x_cs:pc_debug:i:PCMCIA_DEBUG:
-fmvj18x_cs:irq_mask:i:0xdeb8:
-fmvj18x_cs:sram_config:i:0:
-ftl_cs:pc_debug:i:PCMCIA_DEBUG:
-ftl_cs:shuffle_freq:i:50:
-ftl_cs:major_dev:i:0:
-ibmtr_cs:irq_list:1-4i:-1:
-ibmtr_cs:pc_debug:i:PCMCIA_DEBUG:
-ibmtr_cs:irq_mask:i:0xdeb8:
-ibmtr_cs:srambase:i:0:
-ibmtr_cs:ringspeed:i:16:
-ibmtr_cs:mmiobase:i:0:
-ibmtr_cs:sramsize:i:16:
-ide_cs:irq_list:1-4i:-1:
-ide_cs:pc_debug:i:PCMCIA_DEBUG:
-ide_cs:irq_mask:i:0xdeb8:
-iflash2+_mtd:pc_debug:i:PCMCIA_DEBUG:
-iflash2_mtd:max_tries:i:4096:
-iflash2_mtd:word_width:i:1:
-iflash2_mtd:pc_debug:i:PCMCIA_DEBUG:
-iflash2_mtd:mem_speed:i:0:
-iflash2_mtd:vpp_timeout_period:i:1000:
-iflash2_mtd:erase_timeout:i:100:
-iflash2_mtd:retry_limit:i:4:
-iflash2_mtd:erase_limit:i:10000:
-iflash2_mtd:vpp_settle:i:100:
-memory_cb:pc_debug:i:PCMCIA_DEBUG:
-memory_cs:force_size:i:0:
-memory_cs:word_width:i:1:
-memory_cs:pc_debug:i:PCMCIA_DEBUG:
-memory_cs:mem_speed:i:0:
-nmclan_cs:irq_list:1-4i:-1:
-nmclan_cs:pc_debug:i:PCMCIA_DEBUG:
-nmclan_cs:irq_mask:i:0xdeb8:
-nmclan_cs:if_port:i:0:
-parport_cs:irq_list:1-4i:-1:
-parport_cs:pc_debug:i:PCMCIA_DEBUG:
-parport_cs:irq_mask:i:0xdeb8:
-parport_cs:epp_mode:i:1:
-pcnet_cs:use_big_buf:i:1:
-pcnet_cs:irq_list:1-4i:-1:
-pcnet_cs:pc_debug:i:PCMCIA_DEBUG:
-pcnet_cs:irq_mask:i:0xdeb8:
-pcnet_cs:mem_speed:i:0:
-pcnet_cs:use_shmem:i:-1:
-pcnet_cs:delay_output:i:0:
-pcnet_cs:delay_time:i:4:
-pcnet_cs:if_port:i:1:
-pcnet_cs:hw_addr:6i:{ 0,:
-qlogic_stub:irq_list:1-4i:-1:
-qlogic_stub:pc_debug:i:PCMCIA_DEBUG:
-qlogic_stub:irq_mask:i:0xdeb8:
-serial_cb:pc_debug:i:PCMCIA_DEBUG:
-serial_cs:irq_list:1-4i:-1:
-serial_cs:pc_debug:i:PCMCIA_DEBUG:
-serial_cs:irq_mask:i:0xdeb8:
-serial_cs:do_sound:i:1:
-smc91c92_cs:irq_list:1-4i:-1:
-smc91c92_cs:pc_debug:i:PCMCIA_DEBUG:
-smc91c92_cs:irq_mask:i:0xdeb8:
-smc91c92_cs:if_port:i:0:
-sram_mtd:word_width:i:1:
-sram_mtd:pc_debug:i:PCMCIA_DEBUG:
-sram_mtd:mem_speed:i:0:
-tulip_cb:csr0:i:0x00A00000 | 0x4800:
-tulip_cb:full_duplex:?:0,:
-tulip_cb:options:?:0,:
-tulip_cb:rx_copybreak:i:100:
-tulip_cb:debug:i::
-tulip_cb:reverse_probe:i:0:
-tulip_cb:max_interrupt_work:i:25:
-xirc2ps_cs:irq_list:1-4i:-1:
-xirc2ps_cs:pc_debug:i:PCMCIA_DEBUG:
-xirc2ps_cs:irq_mask:i:0xdeb8:
-xirc2ps_cs:card_type:i:0:
-xirc2ps_cs:lockup_hack:i:0:
-xirc2ps_cs:do_sound:i:1:
-xirc2ps_cs:if_port:i:0:
-cb_enabler:pc_debug:i:PCMCIA_DEBUG:
-cs:pc_debug:i:PCMCIA_(n, args...) do { } while (0):
-ds:pc_debug:i:PCMCIA_DEBUG:
-i82365:pci_irq_list:1-8i:0:
-i82365:irq_list:1-16i:-1:
-i82365:pc_debug:i:PCMCIA_DEBUG:
-pci_fixup:cb_mem_base:i:0x0, 0x68000000, 0xf8000000:
-rsrc_mgr:probe_mem:i:1:
-rsrc_mgr:probe_io:i:1:
-rsrc_mgr:mem_limit:i:0x10000:
-tcic:irq_list:1-16i:-1:
-tcic:pc_debug:i:PCMCIA_DEBUG:
-tcic:irq_mask:i:0xffff:
-tcic:tcic_base:i:0x240:
-tcic:poll_quick:i:HZ/20:
-tcic:do_scan:i:1:
-tcic:cycle_time:i:70:
-tcic:cs_irq:i:0:
-tcic:poll_interval:i:0:
-tcic:ignore:i:-1:
-airo:rates:1-8i:0,0,0,0,0,0,0,0:
-airo:io:1-4i:0,:
-airo:aux_bap:i:0:
-airo:ssids:1-3s:0,0,0:
-airo:auto_wep:i:0:
-airo:basic_rate:i:0:
-airo:irq:1-4i:0,:
-airo_cs:irq_list:1-4i:-1:
-airo_cs:pc_debug:i:PCMCIA_DEBUG:
-airo_cs:irq_mask:i:0xdeb8:
-netwave_cs:scramble_key:i:0x0:
-netwave_cs:irq_list:1-4i:-1:
-netwave_cs:pc_debug:i:PCMCIA_DEBUG:
-netwave_cs:irq_mask:i:0xdeb8:
-netwave_cs:mem_speed:i:0:
-netwave_cs:domain:i:0x100:
-ray_cs:country:i:1:
-ray_cs:net_type:i:0:
-ray_cs:sniffer:i:0:
-ray_cs:essid:s:0:
-ray_cs:pc_debug:i:RAYLINK_DEBUG:
-ray_cs:irq_mask:i:0xdeb8:
-ray_cs:hop_dwell:i:128:
-ray_cs:phy_addr:s:0:
-ray_cs:bc:i:0:
-ray_cs:psm:i:0:
-ray_cs:ray_mem_speed:i:500:
-ray_cs:beacon_period:i:256:
-ray_cs:translate:i:1:
-wvlan_cs:station_name:?:"\0":
-wvlan_cs:irq_list:1-4i:-1:
-wvlan_cs:pc_debug:i:PCMCIA_DEBUG:
-wvlan_cs:eth:i:0:
-wvlan_cs:irq_mask:i:0xdeb8:
-wvlan_cs:network_name:?:"\0":
-wvlan_cs:mtu:i:1500:
-wvlan_cs:medium_reservation:i:2347:
-wvlan_cs:frag_threshold:i:2346:
-wvlan_cs:channel:i:wrq->u.freq.m:
-wvlan_cs:port_type:i:1:
-wvlan_cs:transmit_rate:i:3:
-wvlan_cs:ap_density:i:1:
diff --git a/perl-install/share/po/.cvsignore b/perl-install/share/po/.cvsignore
deleted file mode 100644
index 1ffdd04b6..000000000
--- a/perl-install/share/po/.cvsignore
+++ /dev/null
@@ -1,5 +0,0 @@
-.*.sw?
-*.mo
-*~
-doc
-help-*.pot
diff --git a/perl-install/share/po/Changelog b/perl-install/share/po/Changelog
deleted file mode 100644
index f74a59c53..000000000
--- a/perl-install/share/po/Changelog
+++ /dev/null
@@ -1,246 +0,0 @@
-2001-03-14  Pablo Saratxaga  <pabloàmandrakesoft.com>
-
-	* i18n_compssUsers: improved the script to not include path=
-	lines
-
-2000-10-03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* fr.po: fixed bug #518 and fixed other misc errors
-
-2000-09-16  Pixel  <pixel@mandrakesoft.com>
-	* de.po: fix translation of "Size: %d KB\n" (was MB instead of KB)	
-
-2000-04-28  Stefan Siegel <siegel@linux-mandrake.com>
-	* de.po: Update German File
-
-2000-04-18  Pablo Saratxaga <pablo@mandrakesoft.com>
-	
-	* cy.po: There is now a Welsh file, Thanks Dafydd !
-	* da.po: Updated Danish file
-
-2000-04-04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lv.po: Added Latvian file; now we are the very first to have
-	Latvian language :)
-
-2000-03-26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* sk.po: Slovakian translation is now mantained and updated
-
-2000-01-10  Pixel  <pixel@mandrakesoft.com>
-
-	* po/Changelog: remove the paragraph which was removed from
-	help.pm in br.po cs.po el.po et.po gl.po ro.po ru.po tr.po
-
-2000-01-06 François PONS <fpons@mandrakesoft.com>
-	* it.po: updated by Maurizio.
-
-2000-01-06 David BAUDENS <baudens@mandrakesoft.com>
-	* fr.po: updated
-
-2000-01-05  Pixel  <pixel@mandrakesoft.com>
-	* *.po: changed the crypto message (french address in usa, and
-	removed a paragraph)
-
-2000-01-03  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* *.po: merged some strigns from gnorpm to help transaltiosn fo
-	rpmdrake new strings
-
-2000-01-03  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: updated Norwegian file
-	* id.po: updated Indonesian file
-	* hr.po: updated Croatian file
-	* da.po: updated Danish file
-	* et.po: updated Estonian file
-
-2000-01-01  Pablo Saratxaga <pablo@mandrakesoft.com>
-	Happy New Year to all !
-	* es.po: completed Spanish file
-	* zh_CN.po: created a GB2312 version by converting the Big5 one
-	however a real mantainer for a GB2312 version is still wanted
-	* ca.po: the first one to be updated after Y2K :)
-
-1999-12-30  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* zh_TW.Big5.po: uddated chinese file
-	* it.po: updated the Italian file
-	* es.po: completed spanish file
-	* br.po: updated Britton file
-	* ja.po: updated Japanese file
-
-1999-12-29  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: completed Norwegian file
-	* eo.po: Completed esperanto file
-	* sv.po: updated Swedish file
-	* hu.po: compelted Hungarian file
-
-1999-12-27  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* ru.po: updated Russian file
-	* id.po: completed Indonesian file
-	* et.po: Estonian files fixes
-	* no.po: completed file
-	* et.po: completed file
-	* lt.po: updated Lithuanian file
-	* da.po: completed Danish file
-	* ja.po: updated Japanese file
-
-1999-12-24  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* lt.po: updated Lithuanian file
-	* *.po: new strings have been added...
-
-1999-12-23  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* eo.po: completed esperanto file
-	* hr.po: updated Croatian file
-	* zh_TW.Big5: updated chinese file
-	* id.po: completed Indonesian file
-	* et.po: completed Estonian file
-	* sv.po: updated swedish file
-	* da.po: completed Danish file
-	* bg.po: updated Bulgarian file
-	* sr.po: updated serbian file
-	* no.po: completed norwegian file
-
-1999-12-22  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* de.po: update from Stefan Siegel <siegel@informatik.uni-kl.de>
-	* bg.po: updated Bulgarian file
-
-1999-12-16  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* *.po: updated po files
-	* ja.po: added japanese file
-
-1999-12-12  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* pt_BR.po: added portuguese file from Andrei <andreib@zaz.com.br>
-
-1999-12-10  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* et.po: completed 100% the Estonian file
-
-1999-12-09  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* th.po: Thai file from Kan Yuenyong <kan@kaiwal.com>
-
-1999-12-07  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* ro.po: did 'ispell -d romanian ro.po', I hope that improves the
-	lack of 8 bit letters; but a real mantainer is needed.
-
-1999-12-02  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* es.po, ca.po, no.po, id.po: Completed Spanish, Catalan,
-	Norwegian and Indonesian language files.
-	* hu.po: Update of Hungarian file (60% done)
-
-1999-11-30  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* hu.po: added Hungarian language file
-
-1999-11-26  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: updated Norwegian file
-	* ca.po: added beginnign of Catalan file from SoftCatalà
-
-1999-11-25  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* *.po: corrected a typo ( s/Size: %d/Size: %s/ )
-	* de.po: updated German file
-	* id.po: updated Indonesian file
-
-1999-11-24  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* bg.po: added Bulgarian file from Elena Radåva <ely@triada.bg>
-
-1999-11-19  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* uk.po: added Ukrainian file
-	* pl.po: Polish is now 100% complete!
-
-1999-11-18  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* et.po: added estonian from Riho Kurg <riho@aso.ee>
-	* pl.po: updated polish from Pawel Jablonski
-
-1999-11-16  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* update-po, lots of new strings :)
-	* es.po: updated & completed
-
-1999-11-10  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* es.po: completed
-	* pl.po: updated from Pavel Jablonski
-
-1999-11-08  François PONS <fpons@mandrakesoft.com>
-	* fr.po: updated.
-
-1999-11-05  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* pl.po: added Polish language file
-	* ru.po: updated russian file
-	* no.po: completed norwegian file
-
-1999-11-04  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* es.po: updated and completed spanish language file
-	* wa.po: updated walon language file
-
-1999-10-30  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* es.po: updated spanish language file
-
-1999-10-22  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* it.po, es.po: uopdated spanish and italian language files
-
-1999-10-22  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: update of the Nowegian translation by Terje Bjerkelia
-
-1999-10-22  Pixel  <pixel@linux-mandrake.com>
-	* es.po: some corrections by Camille <camille@mandrakesoft.com>
-
-1999-10-21  François PONS <fpons@mandrakesoft.com>
-	* fr.po: modified printer or queue translation (line 1950 and 2778)
-
-1999-10-21  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* es.po: updated Spanish language file
-
-1999-10-20  François PONS <fpons@mandrakesoft.com>
-	* fr.po: corrected "Skip PCMCIA probing" message with new msgid
-
-1999-10-14  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* ru.po: new Russian translations from Aleksey Smirnov
-	* no.po: update of the Nowegian translation by Terje Bjerkelia
-
-1999-10-13  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* *.po: checked that the name is correctly DrakX now, and updated them
-	* tr.po: newer translations from Hakan Terzioðlu <hakan@gelecek.com.tr>
-
-1999-10-11  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po,es.po: updated Norwegian and Spanish language files
-
-1999-09-30  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* es.po: updated Spanish language file
-
-1999-09-26  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: updated norwegian file
-
-1999-09-25  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* it.po: updated italian file
-
-1999-09-19  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: update Norwegian language file
-
-1999-09-18  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* tr.po: Added Turkish language file from
-	Hakan Terzioðlu <hakan@gelecek.com.tr>
-	* it.po: updated italian file
-
-1999-09-13  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* it.po: added italian language file from
-	"Paolo Lorenzin" <pasusu@tin.it>
-
-1999-09-08  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* id.po, es.po: completed files
-
-1999-08-26  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* fr.po: updated fr.po from gregus@linux-mandrake.com (Grégoire Colbert)
-	who is now in charge of the French translation
-
-1999-08-25  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* Makefile: corrected the msgmerge update (translations were
-	being deleted !). make it so DrakX.pot has a header
-	* *.po: get back all *.po files to the latest version including
-	translated strings. add headers
-	* id.po: update from indonesian team
-
-1999-08-22  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: added norwegian translations from
-	Terje Bjerkelia <terje@bjerkelia.com>
-
-1999-08-18  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* Changelog: created a Changelog file
-	* id.po: added indonesian translations from
-          Mohammad DAMT <mdamt@cakraweb.com>
-
diff --git a/perl-install/share/po/DrakX.pot b/perl-install/share/po/DrakX.pot
deleted file mode 100644
index 0b47e4fd4..000000000
--- a/perl-install/share/po/DrakX.pot
+++ /dev/null
@@ -1,7619 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2001-11-19 18:34+0100\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8-bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "XFree %s"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:439
-msgid "Select the memory size of your graphic card"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:497
-msgid "Choose options for server"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:521
-msgid "Choose a monitor"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:521
-msgid "Monitor"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:524
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:531
-msgid "Horizontal refresh rate"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:532
-msgid "Vertical refresh rate"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:569
-msgid "Monitor not configured"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:572
-msgid "Graphic card not configured yet"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Resolutions not chosen yet"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:593
-msgid "Do you want to test the configuration?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:597
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:600
-msgid "Test of the configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:638 ../../Xconfigurator.pm_.c:650
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:638 ../../Xconfigurator.pm_.c:650
-msgid "An error has occurred:"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:674
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:685
-msgid "Is this the correct setting?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:694
-msgid "An error has occurred, try to change some parameters"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:765
-msgid "Resolution"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:816
-msgid "Choose the resolution and the color depth"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:818
-#, c-format
-msgid "Graphic card: %s"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:819
-#, c-format
-msgid "XFree86 server: %s"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:835 ../../printerdrake.pm_.c:1918
-#: ../../standalone/draknet_.c:301 ../../standalone/draknet_.c:304
-msgid "Expert Mode"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:836
-msgid "Show all"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:881
-msgid "Resolutions"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1444
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Monitor: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1446
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1449
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1452
-#, c-format
-msgid "Color depth: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1453
-#, c-format
-msgid "Resolution: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1455
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1456
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1474
-msgid "Preparing X-Window configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Change Monitor"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Change Graphic card"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1502
-msgid "Change Server options"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1503
-msgid "Change Resolution"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1504
-msgid "Show information"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1505
-msgid "Test again"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1506 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1537
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1557
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1560
-msgid "X at startup"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr ""
-
-#: ../../any.pm_.c:104 ../../any.pm_.c:129
-msgid "First sector of boot partition"
-msgstr ""
-
-#: ../../any.pm_.c:104 ../../any.pm_.c:129 ../../any.pm_.c:202
-msgid "First sector of drive (MBR)"
-msgstr ""
-
-#: ../../any.pm_.c:108
-msgid "SILO Installation"
-msgstr ""
-
-#: ../../any.pm_.c:109 ../../any.pm_.c:122
-msgid "Where do you want to install the bootloader?"
-msgstr ""
-
-#: ../../any.pm_.c:121
-msgid "LILO/grub Installation"
-msgstr ""
-
-#: ../../any.pm_.c:133 ../../any.pm_.c:147
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:135
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:136 ../../any.pm_.c:147
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:139
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:143
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:147
-msgid "Yaboot"
-msgstr ""
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:185
-msgid "Bootloader main options"
-msgstr ""
-
-#: ../../any.pm_.c:154 ../../any.pm_.c:186
-msgid "Bootloader to use"
-msgstr ""
-
-#: ../../any.pm_.c:156
-msgid "Bootloader installation"
-msgstr ""
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:188
-msgid "Boot device"
-msgstr ""
-
-#: ../../any.pm_.c:159
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr ""
-
-#: ../../any.pm_.c:160
-msgid "Compact"
-msgstr ""
-
-#: ../../any.pm_.c:160
-msgid "compact"
-msgstr ""
-
-#: ../../any.pm_.c:161 ../../any.pm_.c:260
-msgid "Video mode"
-msgstr ""
-
-#: ../../any.pm_.c:163
-msgid "Delay before booting default image"
-msgstr ""
-
-#: ../../any.pm_.c:165 ../../any.pm_.c:743
-#: ../../install_steps_interactive.pm_.c:1011 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:418 ../../printerdrake.pm_.c:497
-#: ../../standalone/draknet_.c:620
-msgid "Password"
-msgstr ""
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:744
-#: ../../install_steps_interactive.pm_.c:1012
-msgid "Password (again)"
-msgstr ""
-
-#: ../../any.pm_.c:167
-msgid "Restrict command line options"
-msgstr ""
-
-#: ../../any.pm_.c:167
-msgid "restrict"
-msgstr ""
-
-#: ../../any.pm_.c:169
-msgid "Clean /tmp at each boot"
-msgstr ""
-
-#: ../../any.pm_.c:170
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr ""
-
-#: ../../any.pm_.c:172
-msgid "Enable multi profiles"
-msgstr ""
-
-#: ../../any.pm_.c:176
-msgid "Give the ram size in MB"
-msgstr ""
-
-#: ../../any.pm_.c:178
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:720
-#: ../../install_steps_interactive.pm_.c:1006
-msgid "Please try again"
-msgstr ""
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:720
-#: ../../install_steps_interactive.pm_.c:1006
-msgid "The passwords do not match"
-msgstr ""
-
-#: ../../any.pm_.c:187
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:189
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:190
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:191
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:192
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:193
-msgid "Default OS?"
-msgstr ""
-
-#: ../../any.pm_.c:217
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-
-#: ../../any.pm_.c:227
-msgid "Add"
-msgstr ""
-
-#: ../../any.pm_.c:227 ../../any.pm_.c:731 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1879
-#: ../../printerdrake.pm_.c:1880 ../../printerdrake.pm_.c:1937
-#: ../../printerdrake.pm_.c:1981
-msgid "Done"
-msgstr ""
-
-#: ../../any.pm_.c:227
-msgid "Modify"
-msgstr ""
-
-#: ../../any.pm_.c:235
-msgid "Which type of entry do you want to add?"
-msgstr ""
-
-#: ../../any.pm_.c:236
-msgid "Linux"
-msgstr ""
-
-#: ../../any.pm_.c:236
-msgid "Other OS (SunOS...)"
-msgstr ""
-
-#: ../../any.pm_.c:237
-msgid "Other OS (MacOS...)"
-msgstr ""
-
-#: ../../any.pm_.c:237
-msgid "Other OS (windows...)"
-msgstr ""
-
-#: ../../any.pm_.c:256
-msgid "Image"
-msgstr ""
-
-#: ../../any.pm_.c:257 ../../any.pm_.c:268
-msgid "Root"
-msgstr ""
-
-#: ../../any.pm_.c:258 ../../any.pm_.c:287
-msgid "Append"
-msgstr ""
-
-#: ../../any.pm_.c:262
-msgid "Initrd"
-msgstr ""
-
-#: ../../any.pm_.c:263
-msgid "Read-write"
-msgstr ""
-
-#: ../../any.pm_.c:270
-msgid "Table"
-msgstr ""
-
-#: ../../any.pm_.c:271
-msgid "Unsafe"
-msgstr ""
-
-#: ../../any.pm_.c:278 ../../any.pm_.c:283 ../../any.pm_.c:286
-msgid "Label"
-msgstr ""
-
-#: ../../any.pm_.c:280 ../../any.pm_.c:291
-msgid "Default"
-msgstr ""
-
-#: ../../any.pm_.c:288
-msgid "Initrd-size"
-msgstr ""
-
-#: ../../any.pm_.c:290
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:298
-msgid "Remove entry"
-msgstr ""
-
-#: ../../any.pm_.c:301
-msgid "Empty label not allowed"
-msgstr ""
-
-#: ../../any.pm_.c:302
-msgid "This label is already used"
-msgstr ""
-
-#: ../../any.pm_.c:610
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr ""
-
-#: ../../any.pm_.c:611
-msgid "Do you have another one?"
-msgstr ""
-
-#: ../../any.pm_.c:612
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr ""
-
-#: ../../any.pm_.c:614 ../../any.pm_.c:773 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:720
-msgid "No"
-msgstr ""
-
-#: ../../any.pm_.c:614 ../../any.pm_.c:772 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:720
-msgid "Yes"
-msgstr ""
-
-#: ../../any.pm_.c:615
-msgid "See hardware info"
-msgstr ""
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:650
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr ""
-
-#: ../../any.pm_.c:651
-#, c-format
-msgid "(module %s)"
-msgstr ""
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:662
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr ""
-
-#: ../../any.pm_.c:670
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-
-#: ../../any.pm_.c:675
-msgid "Autoprobe"
-msgstr ""
-
-#: ../../any.pm_.c:675
-msgid "Specify options"
-msgstr ""
-
-#: ../../any.pm_.c:679
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr ""
-
-#: ../../any.pm_.c:685
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-
-#: ../../any.pm_.c:688
-msgid "Module options:"
-msgstr ""
-
-#: ../../any.pm_.c:699
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-
-#: ../../any.pm_.c:717
-#, c-format
-msgid "(already added %s)"
-msgstr ""
-
-#: ../../any.pm_.c:721
-msgid "This password is too simple"
-msgstr ""
-
-#: ../../any.pm_.c:722
-msgid "Please give a user name"
-msgstr ""
-
-#: ../../any.pm_.c:723
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-
-#: ../../any.pm_.c:724
-msgid "This user name is already added"
-msgstr ""
-
-#: ../../any.pm_.c:728
-msgid "Add user"
-msgstr ""
-
-#: ../../any.pm_.c:729
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-
-#: ../../any.pm_.c:730
-msgid "Accept user"
-msgstr ""
-
-#: ../../any.pm_.c:741
-msgid "Real name"
-msgstr ""
-
-#: ../../any.pm_.c:742 ../../printerdrake.pm_.c:417
-#: ../../printerdrake.pm_.c:496
-msgid "User name"
-msgstr ""
-
-#: ../../any.pm_.c:745
-msgid "Shell"
-msgstr ""
-
-#: ../../any.pm_.c:747
-msgid "Icon"
-msgstr ""
-
-#: ../../any.pm_.c:769
-msgid "Autologin"
-msgstr ""
-
-#: ../../any.pm_.c:770
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-
-#: ../../any.pm_.c:774
-msgid "Choose the default user:"
-msgstr ""
-
-#: ../../any.pm_.c:775
-msgid "Choose the window manager to run:"
-msgstr ""
-
-#: ../../any.pm_.c:784
-msgid "Please, choose a language to use."
-msgstr ""
-
-#: ../../any.pm_.c:786
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-
-#: ../../any.pm_.c:798 ../../install_steps_interactive.pm_.c:663
-msgid "All"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:837
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:840
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:843
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:846
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:849
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-
-#: ../../bootloader.pm_.c:853
-msgid "not enough room in /boot"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:953
-msgid "Desktop"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:955
-msgid "Start Menu"
-msgstr ""
-
-#: ../../bootloader.pm_.c:974
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr ""
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr ""
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr ""
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:644
-#: ../../standalone/draknet_.c:283 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr ""
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:211
-#: ../../standalone/draknet_.c:323 ../../standalone/draknet_.c:439
-#: ../../standalone/draknet_.c:517 ../../standalone/draknet_.c:560
-#: ../../standalone/draknet_.c:661
-msgid "OK"
-msgstr ""
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:518
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:288
-#: ../../interactive.pm_.c:310 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:421 ../../my_gtk.pm_.c:424 ../../my_gtk.pm_.c:721
-#: ../../printerdrake.pm_.c:1188 ../../standalone/drakautoinst_.c:203
-#: ../../standalone/drakgw_.c:649 ../../standalone/draknet_.c:115
-#: ../../standalone/draknet_.c:147 ../../standalone/draknet_.c:316
-#: ../../standalone/draknet_.c:533 ../../standalone/draknet_.c:675
-#: ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr ""
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr ""
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr ""
-
-#: ../../common.pm_.c:94 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr ""
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr ""
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr ""
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:803
-#: ../../diskdrake_interactive.pm_.c:812 ../../diskdrake_interactive.pm_.c:866
-msgid "Read carefully!"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:315
-#: ../../diskdrake_interactive.pm_.c:330 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:340 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:482
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:525
-msgid "Mount point"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:420
-#: ../../diskdrake.pm_.c:537 ../../diskdrake_interactive.pm_.c:355
-#: ../../diskdrake_interactive.pm_.c:490
-msgid "Type"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:225 ../../diskdrake_interactive.pm_.c:363
-msgid "Unmount"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:226 ../../diskdrake_interactive.pm_.c:359
-msgid "Mount"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:231
-msgid "Choose action"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:238
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:241
-msgid "Please click on a partition"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:243
-msgid "Please click on a media"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:246
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:247
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:266 ../../install_steps_gtk.pm_.c:519
-msgid "Details"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:398
-msgid "Ext2"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:398
-msgid "FAT"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:398
-msgid "HFS"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:398
-msgid "Journalised FS"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:398
-msgid "SunOS"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:398
-msgid "Swap"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:399 ../../diskdrake_interactive.pm_.c:954
-msgid "Empty"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:399 ../../install_steps_gtk.pm_.c:375
-#: ../../install_steps_gtk.pm_.c:435 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:403
-msgid "Filesystem types:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:420 ../../diskdrake_interactive.pm_.c:377
-msgid "Create"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:420 ../../diskdrake.pm_.c:422
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:422 ../../diskdrake_interactive.pm_.c:364
-msgid "Delete"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:426
-msgid "Use ``Unmount'' first"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:427 ../../diskdrake_interactive.pm_.c:482
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:481 ../../diskdrake_interactive.pm_.c:524
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:503
-msgid "Mount options"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:510
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:528
-msgid "Removable media"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:535
-msgid "Change type"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:536 ../../diskdrake_interactive.pm_.c:489
-msgid "Which filesystem do you want?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:567
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:572
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:584 ../../diskdrake.pm_.c:654
-msgid "Server"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:585 ../../diskdrake.pm_.c:655
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:618
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:629 ../../diskdrake.pm_.c:642
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:201
-msgid "More"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:285
-msgid "Save partition table"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:286
-msgid "Restore partition table"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:289
-msgid "Reload partition table"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:294
-msgid "Removable media automounting"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:303 ../../diskdrake_interactive.pm_.c:323
-msgid "Select file"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:310
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:324
-msgid "Warning"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:325
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:336
-msgid "Trying to rescue partition table"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:342
-msgid "Detailed information"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:356 ../../diskdrake_interactive.pm_.c:592
-msgid "Resize"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:357 ../../diskdrake_interactive.pm_.c:632
-msgid "Move"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Format"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Active"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:361
-msgid "Add to RAID"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:362
-msgid "Add to LVM"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Remove from RAID"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Remove from LVM"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:367
-msgid "Modify RAID"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:368
-msgid "Use for loopback"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:411
-msgid "Create a new partition"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:414
-msgid "Start sector: "
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:734
-msgid "Size in MB: "
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:417 ../../diskdrake_interactive.pm_.c:735
-msgid "Filesystem type: "
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:418 ../../diskdrake_interactive.pm_.c:938
-#: ../../diskdrake_interactive.pm_.c:1012
-msgid "Mount point: "
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:422
-msgid "Preference: "
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:464
-msgid "Remove the loopback file?"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Change partition type"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:493
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:523
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:530
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:551
-msgid "Computing FAT filesystem bounds"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:551 ../../diskdrake_interactive.pm_.c:607
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:580
-msgid "This partition is not resizeable"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:585
-msgid "All data on this partition should be backed-up"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:587
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:592
-msgid "Choose the new size"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:593
-msgid "New size in MB: "
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which disk do you want to move it to?"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:634
-msgid "Sector"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:635
-msgid "Which sector do you want to move it to?"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:638
-msgid "Moving"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:638
-msgid "Moving partition..."
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:659
-msgid "Choose an existing RAID to add to"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:660 ../../diskdrake_interactive.pm_.c:678
-msgid "new"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:676
-msgid "Choose an existing LVM to add to"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:681
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:720
-msgid "This partition can't be used for loopback"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:732
-msgid "Loopback"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:733
-msgid "Loopback file name: "
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:738
-msgid "Give a file name"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:741
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:742
-msgid "File already exists. Use it?"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "device"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:787
-msgid "level"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:788
-msgid "chunk size"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:803
-msgid "Be careful: this operation is dangerous."
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:818
-msgid "What type of partitioning?"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:836
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:840
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:846
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:866
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:870
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:881
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:883
-msgid "Formatting"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:884
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:885
-#: ../../install_steps_interactive.pm_.c:449
-#, c-format
-msgid "Formatting partition %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:896
-msgid "Hide files"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:896
-msgid "Move files to the new partition"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:897
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:908
-msgid "Moving files to the new partition"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:912
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:916
-#, c-format
-msgid "Removing %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:939 ../../diskdrake_interactive.pm_.c:998
-msgid "Device: "
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:940
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:944 ../../diskdrake_interactive.pm_.c:952
-#: ../../diskdrake_interactive.pm_.c:1016
-msgid "Type: "
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:948
-msgid "Name: "
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:956
-#, c-format
-msgid "Start: sector %s\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid "Size: %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid ", %s sectors"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:961
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Formatted\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:963
-msgid "Not formatted\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:964
-msgid "Mounted\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid "RAID md%s\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:967
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:968
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "Level %s\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:971
-#, c-format
-msgid "Chunk size %s\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:974
-#, c-format
-msgid "Loopback file name: %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:977
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:980
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:999
-#, c-format
-msgid "Size: %s\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:1001
-msgid "Info: "
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:1003
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:1004
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:1018
-#, c-format
-msgid "Options: %s"
-msgstr ""
-
-#: ../../fs.pm_.c:454 ../../fs.pm_.c:464 ../../fs.pm_.c:468 ../../fs.pm_.c:472
-#: ../../fs.pm_.c:476 ../../fs.pm_.c:480
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:513
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr ""
-
-#: ../../fs.pm_.c:575
-msgid "mount failed"
-msgstr ""
-
-#: ../../fs.pm_.c:595
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:604 ../../fs.pm_.c:610 ../../partition_table.pm_.c:579
-msgid "mount failed: "
-msgstr ""
-
-#: ../../fs.pm_.c:625 ../../partition_table.pm_.c:575
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr ""
-
-#: ../../fsedit.pm_.c:465
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:466
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:475
-msgid "Mount points must begin with a leading /"
-msgstr ""
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:480
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:482
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:600
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:685
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:708
-msgid "You don't have any partitions!"
-msgstr ""
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": if the machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to see installed on\n"
-"the machine.\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*) : saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want to resize in order to install your\n"
-"new Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting Information on Your\n"
-"Hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:420
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:456
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:792
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:796
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:808
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:830 ../../partition_table.pm_.c:741
-#, c-format
-msgid "Error reading file %s"
-msgstr ""
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:327
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:288 ../../interactive.pm_.c:310
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:141 ../../interactive_stdio.pm_.c:142
-#: ../../my_gtk.pm_.c:420 ../../my_gtk.pm_.c:721 ../../my_gtk.pm_.c:743
-msgid "Ok"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr ""
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr ""
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr ""
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr ""
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-
-#: ../../install_steps.pm_.c:463
-#, c-format
-msgid "Welcome to %s"
-msgstr ""
-
-#: ../../install_steps.pm_.c:510 ../../install_steps.pm_.c:714
-msgid "No floppy drive available"
-msgstr ""
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Version: %s\n"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:390
-#, c-format
-msgid "Size: %d KB\n"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:483
-#: ../../install_steps_interactive.pm_.c:539
-msgid "Choose the packages you want to install"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:459
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Install"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:499
-#: ../../install_steps_interactive.pm_.c:731
-msgid "Installing"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:512
-msgid "Time remaining "
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:731
-msgid "Preparing installation"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:560
-#, c-format
-msgid "Installing package %s"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:616
-#: ../../install_steps_gtk.pm_.c:620 ../../install_steps_interactive.pm_.c:768
-#: ../../install_steps_interactive.pm_.c:772
-msgid "Go on anyway?"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:616
-#: ../../install_steps_interactive.pm_.c:768
-msgid "There was an error ordering packages:"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:217
-msgid "Install Class"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:649
-msgid "Package Group Selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:322 ../../install_steps_interactive.pm_.c:664
-msgid "Individual package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:345 ../../install_steps_interactive.pm_.c:628
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:387
-msgid "Bad package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Name: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:391
-#, c-format
-msgid "Importance: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:413
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:418
-msgid "The following packages are going to be installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:419
-msgid "The following packages are going to be removed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:431
-msgid "You can't select/unselect this package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:445
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:458
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Load/Save on floppy"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463
-msgid "Updating package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:468
-msgid "Minimal install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:505
-msgid "Estimating"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:524
-msgid "Please wait, preparing installation"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:555
-#, c-format
-msgid "%d packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:601 ../../install_steps_interactive.pm_.c:178
-#: ../../install_steps_interactive.pm_.c:755
-#: ../../standalone/drakautoinst_.c:202
-msgid "Accept"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:601 ../../install_steps_interactive.pm_.c:178
-#: ../../install_steps_interactive.pm_.c:755
-msgid "Refuse"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:602 ../../install_steps_interactive.pm_.c:756
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:620 ../../install_steps_interactive.pm_.c:772
-msgid "There was an error installing packages:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:101
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:102
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:198
-#: ../../install_steps_interactive.pm_.c:944
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:199
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:200
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:217
-msgid "Which installation class do you want?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:219
-msgid "Install/Update"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:219
-msgid "Is this an install or an update?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:228
-msgid "Recommended"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:231
-#: ../../install_steps_interactive.pm_.c:234
-msgid "Expert"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Update"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:254 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:260 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:261 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:269
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:271
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:272
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:291
-msgid "Configuring PCMCIA cards..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:291
-msgid "PCMCIA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:296
-msgid "Configuring IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:296
-msgid "IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:311
-msgid "no available partitions"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:314
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:322
-msgid "Choose the mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:341
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:354
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:379
-msgid "No root partition found to perform an upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:380
-msgid "Root Partition"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:381
-msgid "What is the root partition (/) of your system?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:419
-msgid "Choose the partitions you want to format"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:420
-msgid "Check bad blocks?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:446
-msgid "Formatting partitions"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:448
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:451
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:457
-msgid "Looking for available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:463
-msgid "Finding packages to upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:480
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:499
-#, c-format
-msgid "Complete (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:499
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:499
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:505
-msgid "Custom"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:552
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:555
-msgid "Load from floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:557
-msgid "Loading from floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:557
-msgid "Package selection"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:562
-msgid "Insert a floppy containing package selection"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:574
-msgid "Save on floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:635
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:706
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:711
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:740
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:786
-msgid "Post-install configuration"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:792
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:798
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:823
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:855
-msgid "Choose a mirror from which to get the packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:866
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:869
-msgid "Please choose the packages you want to install."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "Which is your timezone?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:886
-msgid "Hardware clock set to GMT"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:887
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:894
-msgid "NTP Server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:936 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:929
-msgid "No printer"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:940 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:943
-msgid "Mouse"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:945
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:946 ../../printerdrake.pm_.c:1806
-#: ../../printerdrake.pm_.c:1877
-msgid "Printer"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:948
-msgid "ISDN card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:954
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:990
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1018
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:991
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1027
-msgid "NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:992
-#: ../../install_steps_interactive.pm_.c:1014
-msgid "Local files"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1001
-#: ../../install_steps_interactive.pm_.c:1002 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1003
-msgid "No password"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1008
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1014 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:621
-msgid "Authentication"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Authentication LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1023
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1024
-msgid "LDAP Server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Authentication NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1031
-msgid "NIS Domain"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "NIS Server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1067
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1083
-msgid "First floppy drive"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1084
-msgid "Second floppy drive"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1085 ../../printerdrake.pm_.c:1412
-msgid "Skip"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1090
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1099
-msgid "Sorry, no floppy drive available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1103
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1107
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Creating bootdisk"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1117
-msgid "Preparing bootloader"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Do you want to use aboot?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1137
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1144
-msgid "Installing bootloader"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1150
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1158
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1166 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1167 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1168 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1172 ../../standalone/draksec_.c:70
-msgid "Choose security level"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1212
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1223
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1234
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid "Generate auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1248
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Automated"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Replay"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1256
-msgid "Save packages selection"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr ""
-
-#: ../../interactive.pm_.c:286
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:347
-msgid "Please wait"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:121
-msgid "=> There are many things to choose from ($ll).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:173
-msgid "Czech (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:175
-msgid "German"
-msgstr ""
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr ""
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:182
-msgid "Spanish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:183
-msgid "Finnish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:184
-msgid "French"
-msgstr ""
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:209
-msgid "Norwegian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:217
-msgid "Russian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:219
-msgid "Swedish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:234
-msgid "UK keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:235
-msgid "US keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:154
-msgid "Albanian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:155
-msgid "Armenian (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:156
-msgid "Armenian (typewriter)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:157
-msgid "Armenian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:162
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:164
-msgid "Belgian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:165
-msgid "Bulgarian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:166
-msgid "Brazilian (ABNT-2)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:167
-msgid "Belarusian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:168
-msgid "Swiss (German layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:169
-msgid "Swiss (French layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174
-msgid "Czech (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:176
-msgid "German (no dead keys)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:177
-msgid "Danish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:178
-msgid "Dvorak (US)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:179
-msgid "Dvorak (Norwegian)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:180
-msgid "Dvorak (Swedish)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:181
-msgid "Estonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:185
-msgid "Georgian (\"Russian\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:186
-msgid "Georgian (\"Latin\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:187
-msgid "Greek"
-msgstr ""
-
-#: ../../keyboard.pm_.c:188
-msgid "Hungarian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:189
-msgid "Croatian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:190
-msgid "Israeli"
-msgstr ""
-
-#: ../../keyboard.pm_.c:191
-msgid "Israeli (Phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:192
-msgid "Iranian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:193
-msgid "Icelandic"
-msgstr ""
-
-#: ../../keyboard.pm_.c:194
-msgid "Italian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:196
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:199
-msgid "Korean keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:200
-msgid "Latin American"
-msgstr ""
-
-#: ../../keyboard.pm_.c:201
-msgid "Lithuanian AZERTY (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (new)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:204
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:206
-msgid "Latvian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:207
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:208
-msgid "Dutch"
-msgstr ""
-
-#: ../../keyboard.pm_.c:210
-msgid "Polish (qwerty layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:211
-msgid "Polish (qwertz layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:212
-msgid "Portuguese"
-msgstr ""
-
-#: ../../keyboard.pm_.c:213
-msgid "Canadian (Quebec)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:215
-msgid "Romanian (qwertz)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:216
-msgid "Romanian (qwerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:218
-msgid "Russian (Yawerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:220
-msgid "Slovenian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:224
-msgid "Slovakian (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:225
-msgid "Slovakian (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:227
-msgid "Serbian (cyrillic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:228
-msgid "Thai keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:230
-msgid "Tajik keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:231
-msgid "Turkish (traditional \"F\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:232
-msgid "Turkish (modern \"Q\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:233
-msgid "Ukrainian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:236
-msgid "US keyboard (international)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:237
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:238
-msgid "Yugoslavian (latin)"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr ""
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr ""
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr ""
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr ""
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr ""
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr ""
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr ""
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr ""
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr ""
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr ""
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr ""
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr ""
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr ""
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr ""
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:385
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:420
-msgid "Finish"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:420
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:421
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:721
-msgid "Is this correct?"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr ""
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:617
-msgid "Connection name"
-msgstr ""
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:618
-msgid "Phone number"
-msgstr ""
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:619
-msgid "Login ID"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:621
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:621
-msgid "PAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:621
-msgid "Script-based"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:621
-msgid "Terminal-based"
-msgstr ""
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:622
-msgid "Domain name"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:623
-msgid "First DNS Server (optional)"
-msgstr ""
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:624
-msgid "Second DNS Server (optional)"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr ""
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:258
-#: ../../standalone/draknet_.c:471
-msgid "IP address"
-msgstr ""
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:472
-msgid "Netmask"
-msgstr ""
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr ""
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr ""
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:422
-msgid "IP address should be in format 1.2.3.4"
-msgstr ""
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr ""
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:616
-msgid "Gateway"
-msgstr ""
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr ""
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr ""
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr ""
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr ""
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr ""
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr ""
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr ""
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:190
-#: ../../standalone/draknet_.c:196
-msgid "Testing your connection..."
-msgstr ""
-
-#: ../../network/tools.pm_.c:50 ../../standalone/draknet_.c:223
-msgid "The system is now connected to Internet."
-msgstr ""
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52 ../../standalone/draknet_.c:223
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr ""
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:603
-msgid "Card IRQ"
-msgstr ""
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:604
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:605
-msgid "Card IO"
-msgstr ""
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:606
-msgid "Card IO_0"
-msgstr ""
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:607
-msgid "Card IO_1"
-msgstr ""
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:608
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:609
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:610
-msgid "Provider phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:611
-msgid "Provider dns 1 (optional)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:612
-msgid "Provider dns 2 (optional)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr ""
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:615
-msgid "Dialing mode"
-msgstr ""
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:627
-msgid "Connection speed"
-msgstr ""
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:628
-msgid "Connection timeout (in sec)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:613
-msgid "Account Login (user name)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:614
-msgid "Account Password"
-msgstr ""
-
-#: ../../partition_table.pm_.c:642
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:660
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-
-#: ../../partition_table.pm_.c:748
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr ""
-
-#: ../../partition_table.pm_.c:750
-msgid "Bad backup file"
-msgstr ""
-
-#: ../../partition_table.pm_.c:772
-#, c-format
-msgid "Error writing to file %s"
-msgstr ""
-
-#: ../../partition_table_raw.pm_.c:185
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr ""
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr ""
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr ""
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr ""
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr ""
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr ""
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr ""
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr ""
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr ""
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr ""
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:424 ../../printer.pm_.c:555 ../../printer.pm_.c:845
-#: ../../printerdrake.pm_.c:1257 ../../printerdrake.pm_.c:2056
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:552 ../../printerdrake.pm_.c:811
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:699
-#, c-format
-msgid "(on %s)"
-msgstr ""
-
-#: ../../printer.pm_.c:701
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-msgid "Choose a default printer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1320
-#: ../../printerdrake.pm_.c:1324 ../../printerdrake.pm_.c:1325
-#: ../../printerdrake.pm_.c:1326 ../../printerdrake.pm_.c:2044
-msgid "Close"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:557
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2128
-msgid "Default printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:550
-msgid "Port"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:217 ../../standalone/scannerdrake_.c:40
-msgid "Detecting devices ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:217 ../../standalone/scannerdrake_.c:40
-msgid "Test ports"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:714
-#: ../../printerdrake.pm_.c:807
-msgid "Reading printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:328
-msgid "Remote lpd Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:329
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:332
-msgid "Remote host name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:333
-msgid "Remote printer name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:336
-msgid "Remote host name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:340
-msgid "Remote printer name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:409
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "SMB server host"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:415
-msgid "SMB server IP"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:416
-msgid "Share name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:419
-msgid "Workgroup"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:426
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:430
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:489
-msgid "NetWare Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:490
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:494
-msgid "Printer Server"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:495
-msgid "Print Queue Name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:500
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:504
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:543
-msgid "Socket Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:544
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:549
-msgid "Printer host name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:553
-msgid "Printer host name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:582 ../../printerdrake.pm_.c:584
-msgid "Printer Device URI"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:583
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:598
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:698
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:701
-msgid "Name of printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:702
-msgid "Description"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:703
-msgid "Location"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:717
-msgid "Preparing printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:814
-msgid "Printer model selection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:815
-msgid "Which printer model do you have?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:816
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the \n"
-"auto-detection of your printer model\n"
-"correctly. Search the correct model in the\n"
-"list when the cursor is standing on a \n"
-"wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:896
-msgid "OKI winprinter configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:897
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:946 ../../printerdrake.pm_.c:976
-msgid "Lexmark inkjet configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:977
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1109
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1120
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1124
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1129
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1166
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1182
-msgid "Test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1183
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1188
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1189
-msgid "Print"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1191
-msgid "Standard test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1194
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1197
-msgid "Alternative test page (A4)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1199
-msgid "Photo test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1205 ../../printerdrake.pm_.c:1327
-msgid "Printing test page(s)..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1230
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1234
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1241
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1259 ../../printerdrake.pm_.c:2058
-msgid "Raw printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1267
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1269
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1272 ../../printerdrake.pm_.c:1284
-#: ../../printerdrake.pm_.c:1296
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1274 ../../printerdrake.pm_.c:1314
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1279 ../../printerdrake.pm_.c:1291
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281 ../../printerdrake.pm_.c:1293
-#: ../../printerdrake.pm_.c:1305
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1286 ../../printerdrake.pm_.c:1298
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1303
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1307
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1311
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1322
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1324
-msgid "Print option list"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1348 ../../printerdrake.pm_.c:1774
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1368 ../../printerdrake.pm_.c:1406
-#: ../../printerdrake.pm_.c:1441
-msgid "Transfer printer configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1369
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1380
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1383
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1387
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1390
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1393
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1394 ../../printerdrake.pm_.c:1411
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1407
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1415
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1420
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1428
-msgid "New printer name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1431
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1442
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1453
-msgid "Refreshing printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1461 ../../printerdrake.pm_.c:1524
-#: ../../printerdrake.pm_.c:1545
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1462
-msgid "Starting network ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1484 ../../printerdrake.pm_.c:1492
-#: ../../printerdrake.pm_.c:1494
-msgid "Configure the network now"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1485
-msgid "Network functionality not configured"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1486
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1493
-msgid "Go on without configuring the network"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1533
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1546
-msgid "Restarting printing system ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1578
-msgid "high"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1578
-msgid "paranoid"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1579
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1580
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1614
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1615
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1642 ../../printerdrake.pm_.c:1674
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1731
-#: ../../printerdrake.pm_.c:1811
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1678
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1705
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1760
-msgid "Select Printer Spooler"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1761
-msgid "Which printing system (spooler) do you want to use?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1792
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1839 ../../printerdrake.pm_.c:1871
-#: ../../printerdrake.pm_.c:2059 ../../printerdrake.pm_.c:2121
-msgid "Printer options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1848
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-msgid "Would you like to configure printing?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1890
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1912
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1918 ../../standalone/draknet_.c:304
-msgid "Normal Mode"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1924 ../../printerdrake.pm_.c:2043
-msgid " (Default)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1928 ../../printerdrake.pm_.c:1968
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1929 ../../printerdrake.pm_.c:1969
-msgid "Printer(s) on remote server(s)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1931 ../../printerdrake.pm_.c:1952
-#: ../../printerdrake.pm_.c:1955 ../../printerdrake.pm_.c:2004
-msgid "Add printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2010 ../../printerdrake.pm_.c:2026
-#: ../../printerdrake.pm_.c:2161
-msgid "Do you want to configure another printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2036
-msgid "Modify printer configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2037
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2045
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2048 ../../printerdrake.pm_.c:2095
-msgid "Printer connection type"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2049 ../../printerdrake.pm_.c:2099
-msgid "Printer name, description, location"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051 ../../printerdrake.pm_.c:2114
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2052 ../../printerdrake.pm_.c:2115
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2061 ../../printerdrake.pm_.c:2125
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2062 ../../printerdrake.pm_.c:2130
-msgid "Print test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2063 ../../printerdrake.pm_.c:2132
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2064 ../../printerdrake.pm_.c:2134
-msgid "Remove printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2104
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2129
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2136
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2138
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr ""
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr ""
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr ""
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr ""
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr ""
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr ""
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr ""
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr ""
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:126
-msgid "Printing"
-msgstr ""
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr ""
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-msgid "System"
-msgstr ""
-
-#: ../../services.pm_.c:137
-msgid "Remote Administration"
-msgstr ""
-
-#: ../../services.pm_.c:145
-msgid "Database Server"
-msgstr ""
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr ""
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr ""
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr ""
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:222
-msgid "Infos"
-msgstr ""
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr ""
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr ""
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr ""
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:144
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:160
-msgid "$_"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:242 ../../standalone/drakgw_.c:600
-msgid "Congratulations!"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:281
-msgid "Auto Install"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:343
-msgid "Add an item"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:350
-msgid "Remove the last item"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:312
-#, c-format
-msgid "Problems installing package %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:601
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:619
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:620
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:625
-msgid "Internet connection sharing configuration"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:632
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr ""
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:590
-msgid "Profile: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr ""
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:400
-msgid "Gateway:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:400
-msgid "Interface:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:194
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:199
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:218
-msgid "Starting your connection..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:226
-msgid "Closing your connection..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:231
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-
-#: ../../standalone/draknet_.c:234
-msgid "The system is now disconnected."
-msgstr ""
-
-#: ../../standalone/draknet_.c:246
-msgid "Configure Internet Access..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:253 ../../standalone/draknet_.c:452
-msgid "LAN configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:258
-msgid "Driver"
-msgstr ""
-
-#: ../../standalone/draknet_.c:258
-msgid "Interface"
-msgstr ""
-
-#: ../../standalone/draknet_.c:258
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:258
-msgid "State"
-msgstr ""
-
-#: ../../standalone/draknet_.c:270
-msgid "Configure Local Area Network..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:282
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:309
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:328
-msgid "Please Wait... Applying the configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:408
-msgid "Connected"
-msgstr ""
-
-#: ../../standalone/draknet_.c:408
-msgid "Not connected"
-msgstr ""
-
-#: ../../standalone/draknet_.c:409
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:409
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:434
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:456
-msgid "LAN Configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:467
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:473
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:474
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:475
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:499 ../../standalone/draknet_.c:501
-msgid "activate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:499 ../../standalone/draknet_.c:501
-msgid "desactivate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:555
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:579
-msgid "Internet connection configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:583
-msgid "Internet Connection Configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:592
-msgid "Connection type: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:598
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:625
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:626
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr ""
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr ""
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr ""
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-
-#: ../../standalone/draksec_.c:73
-msgid "Security level"
-msgstr ""
-
-#: ../../standalone/draksec_.c:75
-msgid "Use libsafe for servers"
-msgstr ""
-
-#: ../../standalone/draksec_.c:76
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:80
-msgid "Setting security level"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:51
-#, c-format
-msgid "%s found on %s, configuring it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:58
-msgid "Select a scanner"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:79
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:83
-#, c-format
-msgid "This %s scanner uses parallel port, which is unsupported for the moment"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr ""
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr ""
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr ""
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr ""
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr ""
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr ""
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr ""
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr ""
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr ""
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr ""
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr ""
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr ""
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr ""
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr ""
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr ""
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr ""
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "The K Desktop Environment, the basic graphical environment with a collection of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news (pine, mutt, tin..) and to browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "A graphical environment with user-friendly set of applications and desktop tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr ""
diff --git a/perl-install/share/po/Makefile b/perl-install/share/po/Makefile
deleted file mode 100644
index 6ca5adefa..000000000
--- a/perl-install/share/po/Makefile
+++ /dev/null
@@ -1,62 +0,0 @@
-include ../../Makefile.config
-
-PMSFILES = $(wildcard $(PMS:%=../../%))
-PMSCFILES = $(PMSFILES:%=%_.c)
-
-POFILES = $(shell ls *.po)
-MOFILES = $(POFILES:%.po=%.mo)
-LANGS = $(POFILES:%.po=%)
-
-LOCALEDIR=$(DATADIR)/locale
-
-
-all: help $(MOFILES)
-
-help:
-	cvs co doc/manual/{entities,literal/drakx}
-	rm -rf doc/CVS
-	./help_xml2pm.pl
-
-%.mo: %.po
-	msgfmt -o $@ $<
-
-$(PMSCFILES): %_.c: %
-	./fake_c.pl $< > $@
-
-$(POFILES): DrakX.pot
-	perl -ne 'print unless /^#.*\Qdrakx-help.xml/ .. /^$$/' $@ > $@t
-	if [ -e help-$@t ]; then msgmerge -C help-$@t $@t $< > $@; else msgmerge $@t $< > $@; fi
-	rm $@t
-
-DrakX.pot: $(PMSFILES)
-	$(MAKE) $(PMSCFILES);
-	xgettext -F -n --add-comments='-PO' --keyword=_ --keyword=__ -o $@ $(PMSCFILES)
-	rm $(PMSCFILES)
-	perl i18n_compssUsers 2>/dev/null >> $@
-
-install:
-	for l in $(LANGS); do \
-		install -d $(LOCALEDIR)/$$l/LC_MESSAGES; \
-		install -m 644 $$l.mo $(LOCALEDIR)/$$l/LC_MESSAGES/$(NAME).mo; \
-	done
-
-clean:
-	rm -rf drakx-help.xml help-*.po{t,} doc empty.po tmp.* messages tmp.pot *.mo $(POFILES:%=%t) $(PMSCFILES)
-
-check:
-	@grep -F '$$' DrakX.pot && { echo "bad translation strings (contains \$$) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^"; exit 1; } ||:
-
-verif:
-	perl -ne '/^\s*#/ or $$i += my @l = /\b__?\(/g; END { print "$$i\n" }' $(PMSFILES)
-	perl -ne '$$i += my @l = /\.c:/g; END { print "$$i\n" }' DrakX.pot
-
-verif2: 
-#	perl -I ../.. -Mcommon -e 'foreach (qw($(PMSFILES))) { printf "package foo%d;\n", ++$$i; print common::cat_($$_) }' | perl -ne 'print if !/use (diagnostics|vars|strict)/' | OUTFILE=tmp.pm perl -I. -I../.. -Mb_dump_strings >/dev/null 2>/dev/null
-	perl -pe 's|$$|\\n\\|' tmp.pm > tmp.pm_.c
-	xgettext --keyword=_ -o tmp.po tmp.pm_.c 
-	msgmerge DrakX.pot tmp.po > tmp.pot
-	grep "^msgid" tmp.pot | sort > tmp.pot.light
-	grep "^msgid" DrakX.pot | sort | diff - tmp.pot.light | grep "^>" || true
-
-
-#	for i in *.po; do echo -n "$i "; msgfmt -v $i 2>&1; done | perl -e 'print map { $_->[0] } sort { $a->[1] <=> $b->[1] } map { [ $_, (split)[1] ] } <>'
diff --git a/perl-install/share/po/af.po b/perl-install/share/po/af.po
deleted file mode 100644
index cf1b49521..000000000
--- a/perl-install/share/po/af.po
+++ /dev/null
@@ -1,10009 +0,0 @@
-# KTranslator Generated File
-# Copyright (c) 1999-2000 MandrakeSoft
-# Schalk. W. Cronjé <schalkc@ntaba.co.za>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-09-09 22:06-0000\n"
-"Last-Translator: Schalk W. Cronjé <schalkc@uk.ntaba.com>\n"
-"Language-Team: Afrikaans <mandrake@af.org.za>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Konfigureer skyfkoppe afsonderlik"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Gebruik Xinerama-ekstensies"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigureer net die \"%s\" kaart (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Multikopkonfigurasie"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"U stelsel onderstuen multikopkonfigurasie.\n"
-"Wat wil u doen?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Videokaart"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Selekteer 'n videokaart"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Kies 'n X-bediener"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X-bediener"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Watter tipe XFree-konfigurasie verlang u?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"U videokaart kan slegs 3D-versnelling onder XFree %s ondersteun.\n"
-"DIt word wel onder XFree %s ondersteun wat dalk beter 2D-ondersteuning het."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"U videokaart kan vir 3D-hardewareversnelling ondestuen word in XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s met 3D-hardwareversnelling"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
-"bied,\n"
-"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s met EKSPERIMENTELE 3D-hardewareversnelling"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
-"bied,\n"
-"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES.\n"
-"U kaart word deur XFree %s ondersteun, wat beter 2D-ondersteuning bied."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installasievertoondrywer)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree-konfigurasie"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Kies die geheue grootte van u videokaart"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Selekteer opsies vir bediener"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Kies 'n monitor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Die kritiese twee parameters is die vertikale verfristempo (die tempo\n"
-"waarteen die hele skerm verfris) en die horisontale sinkronisasietempo (die\n"
-"tempo waarteen die horisontale skandeerlyne vertoon word). Lg. is die\n"
-"belangrikste.\n"
-"\n"
-"Dit is BAIE BELANGRIK dat u nie 'n sinkronisasie bereik buite dié van u\n"
-"monitor spesifiseer nie, dit kan die monitor beskadig. Indien u twyfel,\n"
-"kies konservatief."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Horisontale verfristempo"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Vertikale verfristempo"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Monitor is nie opgestel nie"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Grafikakaart is nog nie konfigureer nie"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Resolusie is nog nie gekies nie"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Wil u die konfigurasie toets?"
-
-#
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Waarskuwing: Toetsing is gevaarlik met hierdie videokaart"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Toets konfigurasie"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"probeer van die parameters verander"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Daar was 'n fout:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "uitgang binne %ds"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Is dit korrek?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Hier is fout, probeer van die parameters verander"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Resolusie"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Kies die resolusie en kleurdiepte"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Videokaart: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 bediener: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Kundige modus"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Vertoon almal"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Resolusies"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Sleutelbord uitleg: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Muistipe: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Muistoestel: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor HoriSink: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor VertVerfris: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Videokaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Videokaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Video geheue: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kleurdiepte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolusie: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 bediener: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86-drywer: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "X-Window konfigurasie word opgestel"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Wat wil u doen?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Verander monitor"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Verander videokaart"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Verander bedienerinstellings"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Verander resolusie"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Vertoon inligting"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Toets weer"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Verlaat"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Behou die veranderinge?\n"
-"Huidige konfigurasie is:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Teken asb. weer in %s om veranderinge te aktiveer"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Teken uit en gebruik dan Ctrl-Alt-Backspace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X met herlaai"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ek kan u rekenaar so opstel om X outomaties te laai.\n"
-"Wil u X begin met 'n herlaai?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 kleure (8 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32-duisend kleure (15 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65-duisend kleure (16 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16-miljoen kleure (24 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 biljoen kleure (32 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64MB of meer"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standaard VGA,  640x480 teen 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 teen 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-aanpasbaar, 1024x768 teen 87Hz interverweef (nie 800x600 nie)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 102x768 teen 87 Hz interverweef, 800x600 teen 56 Hz "
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Verlengde Super VGA, 800x600 teen 60 Hz, 640x480 teen 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Nie-interverweefde SVGA, 1024x768 teen 60 Hz, 800x600 teen 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Hod frekwensie SVGA, 1024x768 teen 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frekwensie wat 1280x1024 kan doen teen 60Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frekwensie wat 1280x1024 kan doen teen 74Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frekwensie wat 1280x1024 kan doen teen 76Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor wat 1600x1220 kan doen teen 70Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor wat 1600x1220 kan doen teen 76Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Eerste sektor van herlaaipartisie"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Eerste sektor van skyf (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILO installasie"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Waar wil u die herlaaistelsel installeer"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "LILO/grub installasie"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO met tekskieskaart"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO met grafiese kieskaart"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Laai vauit DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Herlaaistelsel hoofopsies"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Herlaaistelsel om te gebruik"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Herlaaiprogram installasie"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Herlaaitoestel"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (werk nie op 'n ou BIOS'e nie)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Kompak"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "kompak"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Videomodus"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Wagperiode voro verstekstelsel gelaai word"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Wagwoord"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Wagwoord (weer)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Beperk instruksielynopsies"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "beperk"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Maak /tmp skoon met elke herlaai"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Presiese RAM grootte indien nodig (%d MB bespeur)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Gebruik multiprofiele"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Gee die geheuegrootte in MB"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Opsie ``Beperk instruksielynopsies'' kan nie sonder wagwoord gebruikword nie"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Probeer asb. weer"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Die wagwoorde stem nie ooreen nie."
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Beginboodskap"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Tydsbeperking vir stelselkernlaai"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Laat CD-herlaai toe?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Laat OF-herlaai toe?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Verstek bedryfstelsel?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hier is die huidige inskrywings\n"
-"U kan byvoeg or verwyder soos nodig."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Voeg by"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Klaar"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Verander"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Watter tipe inskrywing wil u byvoeg?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Ander bedryfstelsel (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Ander bedryfstelsel (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Ander bedryfstelsel (windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Beeld"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Basis"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Aanlas"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Lees-skryf"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Onveilig"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Etiket"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Verstek"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-grootte"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "Geen video"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Verwyder inskrywing"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Leë etiket word nie toegelaat nie"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Hierdie etiket is alreeds in gebruik"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Het %s %s koppelvlakke gevind"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Beskik u oor nog?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Het u enige %s koppelvlakke?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Nee"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Sien hardeware inligting"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Drywer vir %s kaart %s in installasieproses"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Watter %s drywer meot ek probeer?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"In sekere gevalle sal die %s drywer ekstra inligting benodig, alhoewel in\n"
-"meeste gevalle dit nie nodig wees nie. Wil u ekstra opsies voorsien od moet\n"
-"rekenaar self daarvoor aftas. In uitsonderlike gevalle mag die rekenaar\n"
-"ophang, maar dit sal nie skade veroorsaak nie."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Aftas"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Spesifieer opsies"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "U kan die opsies vir module %s hier intik."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"U kan noue die opsies voorsien vir module %s.\n"
-"Opsies is in die formaat ``naam=waarde naam2=waarde2 ...''.\n"
-"Bv. ``io=0x300 irq-7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Module opsies:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Laai van module %s het gefaal.\n"
-"Wil u ander parameters probeer?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s alreeds bygevoeg)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Die wagwoorde is te eenvoudig"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Gee asb. 'n gebruikerskode"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Die gebruikerskode maag alleenlikui kleinletter, nommers, '-' en '_' bestaan"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Hierdie genruikerskode bestaan alreeds"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Voeg gebruiker by"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Tik 'n gebruiker in\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Aanvaar gebruiker"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Regte naam"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Gebruikerskode"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Dop"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Ikoon"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Outointeken"
-
-#: ../../any.pm_.c:757
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ek kan u rekenaar so opstel om X outomaties een gebruiker in te teken.\n"
-"Verlang u hierdie funksionaliteit?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Kies die verstek gebruiker:"
-
-#
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Kies die vensterbestuurder om te loop:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Alles"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Welkom by %s die bedryfstelselkeuseprogram!\n"
-"\n"
-"Kies u bedryfstelsel uit die bogelyste opsies of wag\n"
-"%d sekonde vir die verstekopsie.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welkom by GRUB, die bedryfstelselkieskaart!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Gebruik die %c en %c sleutels om die inskrywing te kies wat uitgelig moet "
-"word."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Druk ENTER om die gekose bedryfstelsel te laai, 'e' om te redigeer."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "instruksies voor herlaai, of 'c' vir 'n instruksielyn."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Die uitgeligte inskrywing sal outomaties in %ds gelaai word."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "nie genoeg spasie in /boot nie"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Werkskerm"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Beginkieskaart"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Waar wil u die herlaaistelsel installeer"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "Gee hulp beskikbaar nie (nog nie).\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Herlaaistylkonfigurasie"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Lêer"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Lêer/_Verlaat"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<ctrl>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Nuwe monitorkategoriasiestyl"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Nuwe styl monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradisionele monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradisionele Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Laai Aurora met herlaaityd"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "LILO/GRUB metode"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"U gebruik huidig %s as herlaaibestuurder.\n"
-"Kliek op Konfigureer om opstelassistent te laai."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Konfigureer"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Herlaaimodus"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Stelselmode"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Laai X-Windowstelsel met herlaai"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Nee, ek verlang outo-aanteken"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, ek verlang outoaanteken met hierdie (gebruiker,werkskerm)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Kanselleer"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "kan nie /etc/inittab oopmaak vir lees nie: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "LILO installasie het gefaal a.g.v. hierdie fout: "
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minute"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minuut"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekondes"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Rugsteun u data eers asb."
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Lees noukeurig!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Indien u beplan om 'aboot' te gebruik, los spasie aan die begin\n"
-"van die skyf. (2048 sektors is genoeg)."
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Fout"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Assistent"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Nuut"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "Ekstern"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Hegpunt"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Opsies"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Tipe"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Ontheg"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Heg"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Kies aksie"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"U het een massiewe FAT partisie. \n"
-"(gewoonlik deur DOS/Windows gebruik)\n"
-"Ek stel voor u verstel eers die grootte van dié partisie\n"
-"(kliek daarop en kliek dan op \"Verstel Grootte\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Detail"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "Gejoernaliseer"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Ruilarea"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Leeg"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Ander"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "LOersteltipes:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Skep"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Gebruik ``%s'' instede."
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Uitwis"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Gebruik ``Ontheg'' eerste"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Alle data om hierdie partisie %s sal uitgewis word na verandering van die "
-"partisietipe"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Waar wil u toestel %s heg?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "Hegopsies:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "Verskeie"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "Verwyderbare media"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "Verander tipe"
-
-#
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Watter lêerstelsel verlang u?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "Beskikbare NFS-gedeëlde hulpbronne word gesoek"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "Beskikbare NFS-gedeëlde hulpbronne van bediner %s word gesoek."
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-"Indien bo-gelyste inskrywings nie die nodige inskrywing bevat nie, voeg dit "
-"hier by:"
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Bediener"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "Gedeëlde hulpbron"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "Beskikbare SAMBA-gedeëlde hulpbronne word gesoek"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "Beskikbare SAMBA-gedeëlde hulpbronnevan bediener %s word gesoek"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "Kies 'n partisie"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Kies 'n ander partisie"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Verlaat"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Skakel oor na kundige gebruiksvlak"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Skakel oor na normale gebruiksvlak"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Herroep"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Wil u in elk geval voortgaan?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Verlaat, maar moenie iets stoor nie"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Wil u verlaat, sonder om die partisietabel op te dateer?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Wil u die /etc/fstab veranderinge stoor?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Outo-allokeer"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Verwydeer almal"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Nog"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "Hardeskyfinligting"
-
-#: ../../diskdrake_interactive.pm_.c:267
-#, fuzzy
-msgid "Not enough space for auto-allocating"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Alle primêre partisies is gebruik"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Ek kan nie meer partisies byvoeg nie"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Om meer partisies te verkry, verwyder asb. een om 'n ektensiepartisiete kan "
-"skep"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Skryf partisietabel"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Reddingspartisietabel"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Reddingspartisietabel"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Reddingspartisietabel"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Verwyderbare media"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Selekteer lOer"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Die rugsteunpartisietabel het nie dieselfde grootte nie\n"
-"Wil u voortgaan?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Waarskuwing"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Sit 'n floppie in die aandrywer.\n"
-"Alle data op hierdie floppie sal verloor word."
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Partisietabel Reddingspoging"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "Gedetaileerde inligting"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Verstel Grootte"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Skuif"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formatteer"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Aktief"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Voeg by RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Voeg by LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Verwyder uit RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Verwyder uit LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Verander RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Gebruik vir teruglus"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Kies 'n nuwe grootte"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Kies sektor: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Grootte in MB: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "LOerstelseltipe: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Hegpunt:"
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Voorkeure: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Terugluslêer %s word geformateer"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Verander partisietipe"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "Oorskakeling van ext2 na ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Waar wil u terugluslêer %s heg?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kan nie hegpunt ontset nie, omdat hierdie partisie vir teruglus\n"
-"gebruik word. Verwyder eers die teruglus."
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "FAT lêerstelselgrense word bereken"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Grootteverandering"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Hierdie partisie se greootte kan nie verstel word nie"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Alle data om hierdie partisie moet gerugsteun word."
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Alle data om partisie %s sal uitgewis word met die grootteverandering"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Kies die nuwe grootte"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "Nuwe grootte in MB: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Na watter skyf wil u skuif?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Na watter sektor wil u skuif?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Verskuiwing"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Partisie word verskuif..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Kies 'n bestaande RAID om by toe te voeg"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "nuut"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Kies 'n bestaande LVM om by toe te voeg"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "LVM naam?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Hierdie partisie kan nie vir teruglus gebruik word nie."
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Teruglus"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Teruglus lêernaam:"
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Regte naam"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Lêer word alreeds deur 'n ander teruglus gebruik,kies 'n ander een"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Lêer bestaan alreeds. Moet dit gebruik word?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "toestel"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "vlak"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "blokgrootte"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Wees versigtig: hierdie is 'n gevaarlike operasie"
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Watter tipe van partisionering?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Jammer, ek kan nie die versoek om /boot om hierdie skyf (op 'n silinder > "
-"1024) te skep,\n"
-"aanvaar nie. As u LILO gebruik sal dit nie werk nie en as u nie LILO "
-"gebruik\n"
-"nie, dan het u nie /boot nodig nie."
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"_ keuse vir die \"root\" partisie (/) is fisies buite die 1024de silindervan "
-"die\n"
-"hardeskyf en u het nie 'n /boot partisie nie. Indien u beplan om LILO te "
-"gebruik,moet u\n"
-"asb. 'n /boot partisie skep,"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"U het 'n sagteware RAID-partisie as wortel (/).\n"
-"Geen herlaaistelsel sal dit kan hanteer sonder 'n /boot partisie nie.\n"
-"Onthou om 'n /boot by te voeg."
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partisietabel van skyf %s gaan opdateer word!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "U sal moet herlaai voor die veranderinge geaktiveer kan word"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Alle data om partisie %s sal uitgewis word met formatering."
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Formatering"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Terugluslêer %s word geformateer"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Partisie %s word formateer"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid het gefaal"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "LPD word verwyder..."
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Toestel:"
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-skyfletter: %s ('n raaiskoot)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Tipe:"
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Naam: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Begin: sektor %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Grootte: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektore"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Silinder %d na silinder %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Geformateer\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Nie geformatter\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Geheg\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Teruglus lêer(s): %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Verstekpartisie vir herlaai\n"
-"  (vir MS_DOS doeleindes, nie LILO s'n nie)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Vlak %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Blokgrootte %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-skywe %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Teruglus lêernaam: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Dis hoogs waarskynlik dat hierdie partisie\n"
-"drywerpartisie is en verkieslik alleen gelos\n"
-"moet word.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Hierdie spesiale herlaaipartisie\n"
-"is om u stelsel te duolaai.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Grootte: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s silinders, %s koppe, %s sektore\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Info:"
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-skywe %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partisietabeltipe: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "op bus %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Opsies: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering ban %s het gefaal"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ek weet nie om %s as tipe %s te formateer nie"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "heg het gefaal"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck het gefaal met kode %d of sein %d"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "heg het gefaal"
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fout met onthegting van %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "eenvoudig"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "bediener"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "U kan nie JFS vir partisies kleiner as 16MB gebruik nie"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "U kan nie ReiserFS vir partisies kleiner as 32MB gebruik nie"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Hegpunte moet met 'n / begin"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Daar is alreeds 'n partisie met hegpunt %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "U kan nie  LVM logiese volume vir hegpunt %s gebruik nie."
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Hierdie lêergids moet altyd in die wortellêerstelsel bly"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "U benodig 'n ware lêerstelsel (ext2, reiserfs) vir hierdie hegpunt\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Four om %s in skryfmode te open: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"'n Fout het voorgekom - geen geldige toestelle om die nuwe lêerstelsels op "
-"te skep, is gevind nie. Deursoek asb. die hardeware vir die oorsaak."
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "U get geen partisies nie!"
-
-#: ../../help.pm_.c:13
-#, fuzzy
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux is 'n multigebruikerstelsel en dit beteken dat elke gebruiker sy "
-"eie\n"
-"voorkeure kan stel, met sy eie lêers ens. U kan meer hieroor in die "
-"gebruikersgids\n"
-"lees. Maak andersins as 'root', die supergebruiker, kan gebruikers wat u "
-"hier byvoeg\n"
-"niks verander behalwe hul eie lêers en konfigurasie nie. U moet ten minste "
-"een gewone\n"
-"gebruiker vir u self skep. Hierdie gebruker is die een waaronder u moet "
-"inteken vir\n"
-"normale gebruik van die stelsel. Alhoewel dit baie gemaklik is om as 'root' "
-"in te teken vir\n"
-"daaglikse werk, is dit baie gevaarlik. 'n Eenvoudige fout kan u stelsel "
-"immobiliseer. 'n Fout\n"
-"wat as gewone gebruiker gemaak word sal net daardie gebruiker beïnvloed\n"
-"en nie hele stelsel nie.\n"
-"\n"
-"\n"
-"Eers moet u u eie naam intik. Dit is nie verpligtend nie, want u kan eintlik "
-"enigiets intik as\n"
-"u wil. DrakX sal dan die eerste woord wat u ingetik het in die "
-"gebruikerskode inskrywingsveld\n"
-"plaas. U kan hier verander indien u wil. Dit is die gebruikerskode waarmee "
-"die gebruiker in die\n"
-"stelsel sal inteken. U moet dan ook 'n wagwoord hier invoeg. 'n Gewone "
-"gebruiker se wagwoord\n"
-"is nie so krities as dié van die supergebruiker (uit 'n sekuriteitsoogpunt) "
-"nie, maar daar is geen\n"
-"rede om agterlosig met u data te wees nie.\n"
-"\n"
-"\n"
-"Indien u op Aanvaar kliek sal die gebruiker geskep word en kan u nog "
-"gebruikers byvoeg.\n"
-"U kan vir al u vriende gebruikerskodes skep of sommer een vir pa en ma ook. "
-"Wanneer u\n"
-"klaar is kliek op Klaar.\n"
-"\n"
-"Kliek op die Gevorderd knoppie indien u die verstek instruksiedop vir die "
-"gebruiker wil verander.\n"
-"Dit is bash by verstek."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"U kan nou dienste kies wat by herlaaityd moet afskop.\n"
-"Wanneer u die muis oor 'n item beweeg, sal 'n klein ballon opspring\n"
-"wat die rol van die diens verduidelik.\n"
-"\n"
-"Wees versigtig met hierdie stap. Indien u beplan om dié rekenaar as 'n\n"
-"bediener te gebruik wil u nie dienste afskop wat u nie gaan gebruik nie."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux beheer tyd in GMT (Greenwichmeridiaantyd) en vertaal dit dan\n"
-"in u lokale tyd volgends die gekose tydsone."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:384
-#, fuzzy
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"Voordat u voortgaan, lees asb die lisensieterme noukeurig deur. Dit dek\n"
-"die hele Mandrake Lnux distirbusie, and indien u nie saamstem met al die\n"
-"terme daarin bevat nie, kliek om die Weier knoppie. Dit sal onmiddelik die\n"
-"installasie stop sit. Om met die installasie voort te gaan kliek op die "
-"Aanvaar\n"
-"knoppie."
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr "Kies asb. "
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Kies asb. die korrekte poort. Onthou dat COM1 onder MS Windows \n"
-"ttyS0 onder GNU/Linux is."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (Die LInux LOader) en Grub is herlaaistelsels. Beide kan GNU/Linux of "
-"enige ander\n"
-"bedryfstelsel wat op u rekenar teenwoordig is, laai. Gewoonlik word hierdie\n"
-"beryfstelsels reg bespeur en bygevoeg. Indien nie, kan u 'n inskrywing maak\n"
-"op hierdie skerm. Maak seker u kies die korrekte paramters.\n"
-"\n"
-"\n"
-"U mag dalk toegang tot ander bedryfstelsels beperk, in welke geval u die "
-"nodige\n"
-"inskrywings kan uitvee. Maar dan het u die nodige herlaaiskywe nodig om die\n"
-"betrokke bedryfstelsels te laai."
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"U moet aandui waar u die informasie om Linux te herlaai, wil plaas.\n"
-"\n"
-"\n"
-"Behalwe as u werklik weet wat u doen moet u \"Eerste sektor van skyf (MBR)\" "
-"kies."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX sal probeer om vir PCI SCSI-kaarte te soek.\n"
-"Indien DrakX 'n SCSI-kaart bespeur en weet watter drywer omte gebruik sal "
-"dit outomaties installeer word.\n"
-"\n"
-"Indien u nie oor 'n SCSI-kaart, beskik nie of  oor  'n ISA SCSI-kaart of 'n "
-"PCI SCSI-kaart beskik wat DrakX nie kan herken nie, sal u gevra word of daar "
-"enige SCSI-kaarte in diestelsel is. Indien daar geen is nie kliek op 'Nee', "
-"andersins op 'Ja'. U sal dan uit'n drywerlys kan kies.\n"
-"\n"
-"\n"
-"Indien u self 'n drywer moes spesifiseer, sal DrakX u ook vra vir enige "
-"spesifiekeopsies.\n"
-"U kan egter DrakX toelaat om self die hardeware te ondervra. DIt werk "
-"gewoonlik die beste.\n"
-"\n"
-"Lees die installasie inligting hoe om hierdie tipe inligting m.b.v. die "
-"Windows-bedryfstelsel te bekom.\n"
-"U kan dit ook vanaf die internet onttrek indien u sulke toegang het."
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kan nie uitsaau sonder 'n NIS-domein nie"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Sit 'n FAT-geformatteerde skyf in aandrywer %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Hierdie floppie is nie in FAT-formaat nie"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Om hierdie gestoorde pakketkeuse te gebruik, herlaai die installasie met "
-"\"linux defcfg=floppy\""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fout met die les van lêer %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "OK"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Sekere hardeware op u rekenaar benodig geslote drywers.\n"
-" U kan inligting hieroorvind by %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"U moet 'n wortelpartisie definieer.\n"
-"Skep 'n partisie of kliek op 'n bestaande een.\n"
-"Kies dan Hegpunt en stel dit dan '/'."
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "U moet oor 'n ruilpartisie beskik"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"U het nie 'n ruilpartisie nie\n"
-"\n"
-"Wil u steeds voortgaan?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "U moet oor 'n FAT partisie wat as /boot/efi geheg is, beskik"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Gebruik beskikbare spasie"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Gebruik bestaande partisies"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Daar is geen bestaande partisies om te gebruik nie"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Gebruik vir die Windows-partisie vir teruglus"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Watter partisie wil u vir Linux4Win gebruik?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Kies die groottes"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Basispartisiegrootte in MB:"
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Ruilpartisiegrootte in MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Gebruik die beskikbare spasie op die Windowspartisie"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Watter partisie se grootte wil u verander?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Windowslêerstelselgrense word bereken"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Die FAT-verstellingsprogram kan nie u partisie hanteer nie.\n"
-"Fout: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "U Windows-partisie is te gefragmenteer. Loop eers 'defrag' asb."
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"WAARSKUWING\n"
-"\n"
-"DrakX moet nou u WIndowspartisie se grootte verander. Hierdie operasie\n"
-"IS GEVAARLIK. Indien u nie alreeds so gemaak het nie, moet u hierdie "
-"installasie\n"
-"verlaat, scandisk onder Windows loop en dalk ook defrag. Dan kan u terugkeer "
-"na\n"
-"hierdie installasie. Rugstuen ook u data. Insien u skeer is van u saak, kies "
-"OK."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Watter grootte wil u vir Windows behou?"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "partisie %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT-grootteverandering het gefaal: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Daar is geen FAT partisies om te verander of om as teruglus (nie genoeg "
-"spasie nie) te gebruik nie"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Wis hele skyf"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Verwyder Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "U het meer as een hardeskyf, waar wil u Linux installeer?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Alle bestaande partisies en data sal uitgewis word op skyf %s"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Gespesialiseerde skyfpartisionering"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Gebruik fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"U het nou partisie %s partisioneer.\n"
-"Wanneer u klaar is, stoor u veranderinge met 'w'."
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Die Windowspartisie beskik nie oor die nodige spasie nie."
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Ek kon geen plek vir installasie vind nie."
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Die DrakX partisioneringsassistent het die volgende oplossings:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partisionering het misluk: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Netwerk op pad op"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Netwerk op pad af"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"'n Fout het plaasgevind en ek weet nie hoe om dit veilig te hanteer\n"
-"nie. Gaan op u eie risiko voort."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplikaat hegpunt %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Sekere belangrike pakkette het nie korrek geïnstalleer nie.\n"
-"Óf die CDROM-aandrywer óf die CD is foutief.\n"
-"Toets die CD op 'n werkende Linux installasie met \"rpm -qpl Mandrake/RPMS/*."
-"rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Welkom by %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Geen sagteskyaandrywer beskikbaar nie"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Gaan stap '%s' binne\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Kies die grootte van die installasie"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Totale grootte: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Weergawe: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Groote: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Info"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Installasie"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Besig met installasie"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Wag asb.,"
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Tyd oor "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Totale tyd "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Berei installasie voor"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Installeer pakket %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Gaan steeds voort?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Daar was 'n fout met pakkette:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Gebruik bestaande konfigurasie vir X11?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"U stelsel het min hulpbronne beskikbaar. U mag dalk probleme ondervind met "
-"die installering\n"
-"van Mandrake Linux. In so 'n geval probeer eerder die teksinstallasie. "
-"Daarvoor moet u\n"
-"'F1' druk wanneer u vanaf die CDROM herlaai en dan 'text' op die "
-"instruksielyn intik."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Installasieklas"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Kies asb. een van die volgende installasieklasse:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Die totale grootte vir die gekose groepe is naastenby %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Indien u verkies om minder as hierdie grootte te installeer, kies dan 'n\n"
-"persentasie van pakkette wat u wil installeer.\n"
-"\n"
-"'n Lae persentasie sal net die belangrikste pakkette installeer;\n"
-"'n persentasie van 100%% sal alles gekose pakkette installeer."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"U het net spasie op u hardeskyf vir %d%% van hierdie pakkette.\n"
-"\n"
-"Indien u minder wil installeer, kies die persentasie wat u verlang.\n"
-"'n Lae persentasie sal net die belangrikste pakkette installeer;\n"
-"'n Persentasie van %d%% sal soveel moontlik probeer installeer."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "U sal met meer akkuraatheid in die volgende stap kan kies."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Persentasie pakkette om te installeer"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Kies pakketgroepe"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Individuele pakketseleksie"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Totale grootte: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Foutiewe pakket"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Naam: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Belangrikheid: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"U kan nie hierdie pakket selekteer nie, omdat daar nie meer spasie "
-"beskikbaar is nie"
-
-#
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Die volgende pakkette gaan installeer word"
-
-#
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Dei volgende pakkette gaan verwyder word"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "U kan nie hierdie pakket selekteer/deselekteer nie"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Hierdie is 'n verpligte pakket. Dit kan nie uitgehaal word nie."
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "U kan nie heirdie pakket verwyder nie. Dis alreeds geïnstalleer"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "U kan nie hierdie pakket deselekteer nie. Dit moet opgradeer word."
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Wys outogeselekteerde pakkette."
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Laai/Stoor op floppie"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "Pakketseleksie word opgedateer"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "Minimale installasie"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Skatting"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Wag asb. installasie word voorberei"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d pakkette"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Aanvaar "
-
-#
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Weier"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Verander u CDROM!\n"
-"\n"
-"Sit asb. die CDROM getiteld \"%s\" in die aandrywer en druk OK. Indien u "
-"nie\n"
-"hieroor beskik nie, druk Kanselleer om installasies vanaf dié CDROM te vermy."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Daar was 'n fout met die installasie van die pakkette:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "'n Fout het voorgekom"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Lisensieooreenkoms"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Sleutelbord"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Wat is u sleutelborduitleg?"
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Hierdie is die volledige lys van beskikbare sleutelborde"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Watter installasieklas verlang u?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Installeer/Opgradeer"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Is hierdie 'n installasie of opgradering?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Aanbevole"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Kundige"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Opgradeer"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Wat is u muistoestel?"
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Muispoort"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Aan watter seriaalpoort is u muis gekoppel?"
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Knoppie-emulasie"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Knop-2 Emulasie"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Knop-3 emulasie"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Stel PCMCIA op..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "IDE word opgestel"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "geen beskikbare partisies"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Hegpunte vir partisies word nou gesoek"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Kies die hegpunte"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ek kan nie u partisietabel lees nie, dit is te korrup.\n"
-"Ek sal die nodige partisies skoonmaak, maar alle data sal vernietig word.\n"
-"Die ander opsie is om DrakX te belet om die partisietabel te verander.\n"
-"(fout is %s)\n"
-"\n"
-"Will u al die partisies verwyder?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DrakX kon nie die partisietabel korrek interpreteer nie.\n"
-"Gaan aan op u eie risiko!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Geen beskikbare 1MB herlaaipartisie nie! Installasie sal voortgaan, maar u "
-"sal  herlaaipartisie met DiskDrake moet skep indien u die stelsel wil "
-"herlaai."
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "Geen wortellêerstelsel gevind nie"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Basispartisie"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Wat is die basispartisie (/) van u stelsel?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "U moet herlaai om die partisietabelveranderinge te aktiveer"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Kies die partisies om te formatteer"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Toets vir foutiewe areas?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Partisies word formateer"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Lêer %s word geskep en formatteer"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nie genoeg ruilarea om die installasie te voltooi. Voeg asb. by."
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Soek vir beskikbare pakkette"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Soek vir pakkette om op te gradeer."
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"U stelsel het nie genoeg plek vir 'n installasie of opgradering nie (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Klaar (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Aanbevole (%dMB)"
-
-#
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Aangepaste"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Kies asb. die laai of stoor pakketkeuse op die floppie.\n"
-"Die formaat is dieselfde as outoinstallasie-genereerde floppies."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Laai vanaf floppie"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Oplaai vanaf floppie"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Pakketkeuse"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "Sit 'n floppie met die pakketkeuse in aandrywer "
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Stoor op floppie"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Geselekteerde grootte is groter as beskikbare spasie."
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Indien u oor al die gelyste CD's beskik, kliek OK.\n"
-"Indien u oor geen van die gelyste CD's beskik nie, kliek Kanselleer.\n"
-"Indien u net oor sekere CDs beskik, deselekteer die ander en kliek OK."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CDROM getiteld \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installeer nou pakket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Postinstallasiekonfigurasie"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Sit 'n herlaaiskyf wat gebruik is, in aandrywer %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Sit asb. die module-opdateringsfloppie in aandrywer %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"U het nou die kans om enkripsieprogrammatuur af te laai.\n"
-"\n"
-"WAARSKUWING:\n"
-"\n"
-"A.g.v. die verskillende algemene vereistes wat van toepassing gemaak word "
-"deur\n"
-"wetgewing,  moet die eindgebruiker van hierdie sagteware seker wees dat die\n"
-"wette in sy/haar land dit wel toelaat dat om hierdie agteware af te laai, "
-"aan te hou\n"
-"en te gebruik.\n"
-"Daarbenewens moet die gebruiker seker maak dat plaaslike wetgewing nie "
-"oortree\n"
-"word nie. Misbruik kan lei tot ernstige sanksies.\n"
-"\n"
-"In geen geval kan MandrakeSoft nog sy vervaardigers en verskaffers "
-"verantwoordelik\n"
-"gehou word vir spesiale, indirekte or toevallige skade berokken (insluitend, "
-"maar nie\n"
-"beperk tot, winsverlies, besigheidsonderbreking, dataverlies en enige "
-"voorspruitende laste\n"
-"soos moontlik bepaal deur die wetgewende hof) wat vooruitspruit uit die "
-"gebruik, besit\n"
-"of aflaai van hierdie programmatuur nie, na tekening wat hierdie ooreenkoms "
-"nie.\n"
-"\n"
-"\n"
-"Vir navrae vewant aan hierdie ooreenkoms, kontak asb.\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Kies 'n spieël waar die pakkette verkry kan word"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Spieël word gekontak vir die lys van pakkette"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Wat is u tydsone?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "Hardewareklok gestel vir GMT"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Outotydsinkronisasie met NTP"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "NTP-bediener"
-
-#
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Verwyder CUPS-bediener"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Geen drukker"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Opsomming"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Muis"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Tydsone"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Drukker"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDN-kaart"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Klankkaart"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV-kaaer"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "KDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Plaaslike lêers"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Kies 'root' se wagwoord"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Geen wagwoord"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Magtiging"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "LDAP-magtiging"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP Basis-dn"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "LDAP-bediener"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "NIS-magtiging"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS-domein"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS-bediener"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
-"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
-"u nie SILO op u stelsel wil installeer nie, 'n ander bedryfstelsel SILO\n"
-"verwyder of SILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
-"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
-"ernstige stelselfalings te herstel.\n"
-"\n"
-"Indien u 'n herlaaiskyf wil maak,\n"
-"plaas 'n skyf in die aandrywer en druk \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Eerste sagteskyfaandrywer"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Tweede sagteskyfaandrywer"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Mis hierdie stap"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
-"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
-"u nie LILO (of Grub) op u stelsel wil installeer nie, 'n ander bedryfstelsel "
-"LILO\n"
-"verwyder of LILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
-"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
-"ernstige stelselfalings te herstel. Wil u 'n herlaaiskyf maak?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Jammer, geen sagteskyfaandrywer beskikbaar nie"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Kies die sagteskyfaandrywer wat u wil gebruik"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Sit 'n skyf in aandrywer %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Herlaaiskyf word geskryf"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Herlaaistelsel word voorberei"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Wil u aboot gebruik?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Die 'aboot' installasie het gefaal. Wil u 'n installasie afwurg al\n"
-"word die eerste partisie vernietig?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-msgid "Installing bootloader"
-msgstr "Herlaaistelselinstallasie"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Installasie van herlaaiprogram het gefaal a.g.v. hierdie fout: "
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Laag"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Medium"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Hoog"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Gebruik sekuriteitsvlak"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Sit 'n leë floppie in aandrywer %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Outoinstallasieskyf word geskep."
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Bepaalde stappe is nie afgehandel nie.\n"
-"\n"
-"Wil u werklik nou aborteer?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Geluk, installasie is afgehandel.\n"
-"Verwyder die herlaaimedium en druk 'enter' om te herlaai.\n"
-"\n"
-"Vir lapinligting oor hierdie vrystelling vanMandrake Linux,\n"
-"bekyk die errata beskikbaar op http://www.mandrakelinux.com/.\n"
-"Inligting oor stelskonfigurasie is beskikbaar in die postinstallasie-\n"
-"hoofstuk in die Offisiële Liux-Mandrake Gebruikersgids."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Skep outoinstallasieskyf"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Outomaties"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Herspeel"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Stoor pakketseleksie"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installasie %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> tussen elemente  | <Space> selekteer | <F12> volgende skerm "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu is weg"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "Kies 'n lêer"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Gevorderd"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Wag asb."
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Maak boom oop"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Maak boom toe"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Skakel tussen plat- en groepsortering"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Vaagheid (%s). Wees meer presies\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Swak keuse, probeer weer\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (verstek %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "U keuse? (verstek %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "U keuse? (Verstek %s tik 'none' vir geen)"
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Tseggies (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Duits"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Spaans"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Finnies"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Frans"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norweegs"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Pools"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Russies"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Sweeds"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "VK sleutelbord"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "VSA sleutelbord"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Albanies"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armenies (oud)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armenies (tikmasjien)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armenies (Foneties)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latyns)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belgies"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulgaars"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiliaans (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Belarussies"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Switsers (Duitse uitleg)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Switsers (Franse uitleg)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Tseggies (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Duits (geen dooie sleutels)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Deens"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (VSA)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norweegs)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estoniaans"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgies (Russiese uitleg)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgies (Latynse uitleg)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Grieks"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Hongaars"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Kroaties"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Israelies"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Israelies (Foneties)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iranies"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Yslandies"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Italiaans"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japanees 106 sleutels"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Koreaanse sleutelbord"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latyns-Amerikaans"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituanies AZERTY (oud)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituanies AZERTY (nuut)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituanies \"nommerry\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituanies \"foneties\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-msgid "Latvian"
-msgstr "Latvies"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Masedonies"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Nederlands"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Pools (QWERTY uitleg)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Pools (QWERTZ uitleg)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugees"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Kanadees (Quebec)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Romanies (QWERTZ)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Romanies (QWERTY)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Russue (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Sloveens"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaaks (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaaks (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "Serwies (Kirillies)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Thai sleutelbord"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr "Tajik sleutelbord"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turks (tradisionele \"F\" model)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turks (moderne \"Q\" modem)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukranies"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "VSA internasionale sleutelbord"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Viëtnamees \"nommerry\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslaavs (latynse uitleg)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Sirkulêre heg %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Verwyder eers die logiese volumes\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Muis"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standaard"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generiese PS2 wielmuis"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 knop"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Generies"
-
-#
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Wiel"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "seriaal"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Generiese 2-knop muis"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Generiese 3-knop muis"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Reeks (seriaal)"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Muis (seriaal, ou C7 tipe)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmuis"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 knoppies"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 knoppies"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "niks"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Geen muis"
-
-#
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Toets asb. die muis"
-
-#
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Om die muis te aktiveer"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEWEEG DIE WIEL!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Finnies"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Volgende ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Vorige"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Is dit korrek?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Konnekteer aan die internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Die mees algemene metode vir ADSL is om  pppoe te gebruik.\n"
-"Daar is wel sekere konneksie wat pptp of DHCP gebruik.\n"
-"Indien u nie weet nie, kies 'gebruik pppoe'."
-
-#: ../../network/adsl.pm_.c:22
-#, fuzzy
-msgid "Alcatel speedtouch usb"
-msgstr "speedtouch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "gebruik dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "gebruik pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "gebruik pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Watter DCHP-kliënt wil u gebruik?\n"
-"Verstek is dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Geen ethernetkaart is op die stelsel gevind nie.\n"
-"Ek kan nie hierdie konneksietipe opstel nie."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Kies die netwerkkoppelvlak"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Kies asb. die netwerkkoppelvlak wat u wil gebruik vir die internet."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "geen netwerkkaart gevind nie"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Stel netwerk op"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Tik asb die rekenaarnaam in.\n"
-"Sekere DHCP-bedieners benodig die rekenaarnaam.\n"
-"Dit moet 'n volle gekwalifiseerde naam wees,\n"
-"bv. ``myne.mywerk.co.za''."
-
-#
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Rekenaarnaam"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Netwerkkonfigurasie-assistent"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Eksterne ISDN-kaart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interne ISDN-kaart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Watter tipe is u ISDN-konneksie?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nuwe konfigurasie (Ligte ISDN/isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Ou konfigurasie (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN Konfigurasie"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Kies u internetdiensvoorsiener.\n"
-"Indien nie in die lys nie kies Ongelys"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "Europese protokol"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "Europese protokol (EDSS1)"
-
-#
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "Protokol vir die res van die wêreld"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol vir die res vd wêreld \n"
-" geen D-Kanaal nie (bruikhuurlyne)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Watter protokol verlang u?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Oor watter tipe kaart beskik u?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Ek weet nie"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Indien u 'n ISA-kaart het, behoort die waardes op die volgende skerm reg te "
-"wees.\n"
-"\n"
-"Indien u 'n PCMCIA kaart het, moet u die IRQ en I/O van u kaart weet.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Aborteer"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Gaan voort"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Wat is u ISDN-kaart?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ek het 'n ISDB PCI-kaart gevind, maar ek ken nie die tipe nie. Kies asb.'n "
-"PCI-kaart op die volgende skerm."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Geen ISDN PCI-kaart gevind nie. Kies asb. een op die volgende skerm."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Opbelopsies"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Konneksienaam"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Telefoonnommer"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Aantekenkode"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Skriptipe"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Terminaaltipe"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Domeinnaam"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Eerste DNS-bediener (opsioneel)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Tweede DNS-bediener (opsioneel)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"U kan diskonnekteer or herkonfigureer."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"U kan u konneksie herkonfigureer."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "U is tans aan die internet gekonnekteer."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"U kan aan die internet konnekter of u konneksie herkonfigureer."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "U is nie tans aan die internet gekonnekteer nie."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Konnekteer aan die internet"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Diskonnekteer van die internet"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Konfigureer netwerkkonneksie (LAN or internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Internetkonneksie en konfigurasie"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ons gaan nou die %s konneksie herkonfigureer."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Ons gan nou die %s konneksie konfigureer.\n"
-"\n"
-"\n"
-"Drk OK om voort te gaan."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Netwerkkonfigurasie"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Omdat u  netwerk installasie doen, is u netwerk aslreeds opgestel.\n"
-"Kliek op OK om hierdee konfigurasie te behou, of op Kanselleer om u Internet "
-"& Netwerkkonneksie te herkonfigureer.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Welkom by die Netwerkkonfigurasie-assistent\n"
-"\n"
-"Ons gaan nou u internet/netwerkkonneksie konfigureer.\n"
-"Iniden u nie outobespeuring verlang nie, deselekteer die opsie.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Kies die profiel om te konfigureer"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Gebruik outobespeuring"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Toestel word afgetas..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Normale modemkonneksie"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "Op poort %s bespeur"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN konneksie"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "%s bespeur"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ADSL konneksie"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "op koppelvlak %s bespeur"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Kabelkonneksie"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "Kabelkonneksie bespeur"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "LAN konneksie"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "ethernet kaart(e) bespeur"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Kies die konneksie wat u wil konfigureer"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"U het meer as een internetkonneksiemetode opgste.\n"
-"Kies die een wat u verlang.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Internetkonneksie"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Wil u die konneksie met herlaaityd aanskakel?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Netwerkkonfigurasie"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Daar was 'n probleem met die herlaai van die netwerk.\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Geluk, die netwerk en internetkonfigurasie is voltooi.\n"
-"\n"
-"Die kongiurasie gaan op u stelsel toegepas word.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Nadat dit klaar is, sal dit beter wes om u X-omgewing te herlaai\n"
-"om die rekenaarnaamveranderingprobleem te voorkom."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"WAARSKUWING: Die toestel is alreeds opgestel om aan die internette "
-"konnekteer.\n"
-"U kan die toestel net so aanvaar.\n"
-"Veranderinge aan onderstaande velde sal hierdie konfigurasie oorskryf."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Gee asb die IP-konfigurasie vir hierdie rekenaar.\n"
-"Elke item moet as 'n IP-adres in dotdesimalenotasie\n"
-"(1.2.3.4) gegee word."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigureer netwerktoestel %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr "(drywer %s)"
-
-#
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP adres"
-
-#
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Netmasker"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Outomatiese IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adres moet in 1.2.3.4. formaat wees"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Tik asb die rekenaarnaam in.\n"
-"Dit moet 'n volle gekwalifiseerde naam wees,\n"
-"bv. ``myne.mywerk.co.za''.\n"
-"U mag ook die netwerkhek byvoeg indien daar een is"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS bediener"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Portaal"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Netwerkportaaltoestel"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Instaanbedienerkonfigurasie"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP instaanbediener"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP instaanbediener"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr "Volg netwerkkart ID. (nuttig vir skootrekenaars)"
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Instaanbediener moet begin met http://"
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Instaanbediener moet begin met ftp://"
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Internetkonfigurasie"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Wil u nou aan die internet konnekteer?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Konneksie word getoets..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Die stelsel is nou aan die internet gekonnekteer."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Vir sekuriteitsredes, word u nou gediskonnekteer."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Die tselsel blyk nie aan die internet gekonnekteer te wees nie.\n"
-"Probeer om u stelsel te herkonfigureer."
-
-#
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Konneksiekonfigurasie"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Vul asb. die velde hieronder in"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "Kaart IRQ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Kaartgeheue (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "Kaart I/O"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "Kaart IO_0"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "Kaart IO_1"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "U persoonlike telefoonnommer"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Voorsienernaam (bv voorsiener.co.za)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Voorsiener se telefoonnommer"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "Voorsiener DNS 1 (opsioneel)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "Voorsiener DNS 2 (opsioneel)"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "Kies u land"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Belmetode"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Konneksiespoed"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "Konneksie tydlimiet (in sekondes)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Gebruikerskode"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Wagwoord"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Ekstensiepartisie word nie op hierdie platform ondersteun nie"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"U het 'n gat die partisietabel maar ek kan dit nie gebruik nie.\n"
-"Die enigste oplossing is om die primêre partisie te skuif sodat die gat\n"
-"langs die ekstensie partisies is"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Herstel van léer %s het gefaal: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Korrupte rugsteunlêer"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fout in die skryf van %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Iets vrots gebeur op u hardeskyf.\n"
-"'n Dataintegriteitstoets het misluk.\n"
-"Dit beteken dat enigiets wat na u hardeskyf geskryf word as gemors sal "
-"eindig."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "benodig"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "belangrik"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "baie oulik"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "oulik"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "moontlik"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Generiese Unixdrukstelsel (Common Unix Printing System) "
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - Nuwe generasie LPR"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Lyndrukkerdiensprogram"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Druk sonder drukkertou"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Plaaslike drukker"
-
-#
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Eksterne drukker"
-
-#
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "Eksterne CUPS-drukker"
-
-#
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "Eksterne LPD-drukker"
-
-#
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Netwerkdrukker (sok)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "Eksterne Netware-drukker"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "Tik  drukkertoestel URI in"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "Pyk drukstuk na program"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "Onbekende model"
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(op %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "(op hierdie rekenaar)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Kies drukkerkonneksie"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hoe is die drukker gekonekteer?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"Met 'n eksterne CUPS-bediener, hoef u glad nie 'n drukker hier\n"
-"op te stel nie; drukkers wod outomaties bespeur.\n"
-"Indien u twyfel, kies \"Eksterne CUPS-drukker\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Geen"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Kies die verstek gebruiker:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Sluit af"
-
-#
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "Pas toe/herlees drukkers"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-adres moet iets soos 192.168.1.20. lyk"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "Die poortnommer moet  heeltal wees."
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "Verstek drukker"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "CUPS-bediener IP:"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Poort"
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr "Outomatiese CUPS konfigurasie"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Toestel word afgetas..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Toets poorte"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "'n Drukker, model \"%s\", is opgespoor op "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Plaaslikte drukkertoestel"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Watter toestel is die drukker aan gekoppel?\n"
-"(let op dat /dev/lp0 ekwiwalent is aan LPT1:)\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Drukkertoestel:"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "Toestel/Lêernaam ontbreek"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Eksterne lpd drukkeropsies"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Om 'n eksterne lpd drukkertou te gebruik,moett die naam\n"
-"van die drukkkerbediener en die naam van die drukkertou\n"
-"voorsien word."
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "Eksterne bedienernaam"
-
-#
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "Eksterne drukkernaam"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "Eksterne bedienernaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "Eksterne drukkernam ontbreek!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) drukkeropsies"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Om na 'n SMB drukker te druk moet u die volgende voorsien:\n"
-"SMB rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP rekenaarnaam\n"
-"nie); moontlik die IP adres van die drukkerbediener; die drukkernaam; \n"
-"toepaslike gebruikerskode en wagwoord; werkgroepnaam."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "SMB-bedienernaam"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "SMB-bediener IP:"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Drukkernaam:"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Werkgroep:"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Óf die bedienernaam óf die bediener-IP moet verskaf word!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "SAMBA-deelnaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "NetWare drukkeropsies"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Om na 'n Netware drukker te druk moet u die volgende voorsien:\n"
-"Netware rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP\n"
-"rekenaarnaam nie); moontlik die IP adres van die drukkerbediener;\n"
-"die drukkernaam; toepaslike gebruikerskode en wagwoord."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Drukkerbediener"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Drukkertounaam"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "NCP-bedienernaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "NCP-tounaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Sokdrukkeropsies"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Om aan 'n sokdrukker te konnekteer, moet u die rekenaarnaam van die\n"
-"drukker voorsien en dalk ook 'n poortnommer voorsien.\n"
-"Met HP JetDirect-bedieners is die poortnommer gewoonlik 9100,\n"
-"maar dit mag anders wees met ander bedieners. Raadpleeg die handleiding\n"
-"wat saam met die hardeware gekom het."
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "Drukkerbedienernaam"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "Drukkerbedienernaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Drukkertoestel URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"U kan die URI om die drukker te bereik direk spesifiseer. Die URI moet in "
-"CUPS- of Foomatic-formaat wees. Nie alle UTI-tipes moet deur al die "
-"spoelprogramme ondersteun nie."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "'n Geldige URI moet verskaf word!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Elke drukker benodig  naam (bv. lp).\n"
-"Die Beskrywing- en Liggingvelde is opsioneel.\n"
-"Hulle dien as inligting vir gebruikers."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Drukkernaam"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Beskrywing"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Ligging"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "Drukkermodelkeuse"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "Oor watter tipe drukker beskik u?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Verander drukkerkonfigurasie"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Internetkonfigurasie"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opsie %s moet 'n heeltal wees!"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opsie %s moet 'n nommer wees"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Opsie %s is buite bereik!"
-
-#: ../../printerdrake.pm_.c:1136
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Wil u hierdie drukker (\"%s\")\n"
-"die verstek drukker maak?"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "Toetsbladsye"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "Geen toetsbladsye"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "Druk"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "Standaard toetsbladsy"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr "Alternatiewe toetsbladsy (Lettergrootte)"
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr "Alternatiewe toetsbladsy (A4)"
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "Fototoetsbladsy"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Toetsbladsy(e) word gedruk..."
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Toetsbladsy(e) is na die drukkerstelsel gestuur.\n"
-"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
-"Drukstatus:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Toetsbladsy(e) is na die drukker gestuur.\n"
-"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "Het dit reg gewerk?"
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Geen drukker"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Netwerk op pad af"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "Drukkeropsies"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "Dra drukkerkonfigurasie oor"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD en LPRng ondersteun nie IPP-drukkers nie.\n"
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "Moet nie drukkers oordra nie"
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "Oordrag"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "Nuwe drukkernaam"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "%s word oorgedra..."
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Konfigureer drukker"
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Konneksie word begin..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Stel netwerk op"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor is nie opgestel nie"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Stel netwerk op"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Watter drukkerstelsel verlang u?"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Hoog"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoïes"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Watter drukkerstelsel verlang u?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "Installeerde sagteware word deursoek..."
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "LPRng word verwyder..."
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "LPD word verwyder..."
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Kies drukkerspoelprogram"
-
-#
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Watter drukkerstelsel (spoelprogram) verlang u?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigureer drukker"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Drukkeropsies"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "Wil u 'n drukwerk nou konfigureer?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr "Drukkerstelsel:"
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Normale modus"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Verstek)"
-
-#
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Drukkers op eksterne CUPS-bediener(s)"
-
-#
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "Drukkers op eksterne CUPS-bediener(s)"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Voeg drukker by"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Wil u die konfigurasie toets?"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "Verander drukkerkonfigurasie"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Drukker %s: %s %s\n"
-"Wil u hierdie drukker verander?"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "Gaan voort!"
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "Drukkerkonneksietipe"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "Drukkernaam,. beskrywing, ligging"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "Drukkervervaardiger, model, drywer"
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "Drukkervervaardiger, model"
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr "Maak hierdie die verstekdrukker"
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "Druk toetsbladsy(e)"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "Verwyder drukker"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Drukker \"%s\" is nou die verstekdrukker"
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Wil u die werklik die drukker verwyder?"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Instaanbedienerkonfigurasie"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Welkom by die proksiekonfigurasienutsprogram.\n"
-"\n"
-"Hier kan u die HTTP en FTP-instaanbedieners\n"
-"opstel met of sonder aantekenkodes en wagwoorde\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "Poort"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Instaanbediener moet begin met http://"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Die poortgedeelte moet numeries wees"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Vul asb. die FTP-instaanbediener inligting in\n"
-"Los dit oop indien u nie  FTP-instaanbediener verlang nie"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Instaanbediener moet begin met ftp://"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "Gebruikerskode"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Herhaal wagwoord"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "Geen wagwoord"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Die wagwoorde stem nie ooreen nie. Probeer weer!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan nie 'n partisie by geformatteerde RAID md%d byvoeg nie"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Kan nie lêer %s skryf nie"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid het gefaal"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid het gefaal. Dalk is 'raidtools' nie beskikbaar nie."
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nie genoeg partisies vir RAID vlak %d nie\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Loop die ALSA (Gevorderde Linux Klankargitektuur) klankstelsel"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron is skeduleerder vir periodiese instruksies."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd word gebruik om battery status te monitor en dit dan te log via "
-"syslog.\n"
-"Dit kan ook gebruik word om die rekenaar af te bring wanneer die battery "
-"swak is."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Loop instruksies deur 'at' geskeduleer op die tyd deur 'at' gespesifiseer. "
-"Loop ook instruksiebondels wanneer die stelsellas laag genoeg is."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron is die standaard UNIX program om gebruikergespesifiseerde programme\n"
-"op periodies geskeduleerde tye te loop. vixie cron voeg addisionele "
-"funksionaliteit\n"
-"by die standaard UNIX cron, insluitende beter sekuriteit en 'n kragtiger "
-"konfigurasie."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM verleen muisvermoëns aan teksgebaseerde Linuxapplikasies soos\n"
-"Midnight Commander. Dit laat muisgebaseerde knip-en-plak aksies op die\n"
-"konsole toe asook opspringkieskaarte."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache is 'n WWW-bediener.\n"
-"Dit kan HTML-lêers uitstuur en CGI's hanteer"
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Die internetsuperbedienerdiensprogram (gewoonlik inetd genoem) laai 'n\n"
-"verskeidenheid internetdienste soos nodig. Dit is gewoonlik verantwoordelik "
-"vir\n"
-"telnet, ftp, rsh en rlogin. As inetd gesper word, sper dit ook die dienste "
-"waarvoor\n"
-"inetd verantwoordelik is."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Hierdie pakket laai die sleutelbordkaart soos dit in /etc/sysconfig/"
-"keyboard\n"
-"opgestel is. Dit kan vernader word met die kbdconfig nutsprogram. U moet "
-"dit\n"
-"op meeste rekenaars ongesper laat."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Outobespeuring en hardewarekonfigurasie met herlaaityd."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd is die drukkerdiensprogram en is nodig vir lpr om te funksioneer.\n"
-"Dit is 'n diens wat drukstukke na drukkers toe reguleer."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) is die domeinnaamdiens (DNS) wat gebruik word om\n"
-"rekenaarname na IP-adresse toe om te skakel."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Heg en ontheg all netwerklêerstels (NFS), SMB (Lan Manger/Windows)\n"
-"en NCP (Netware) hegpunte."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiveer/Deaktiveer all netwerkkoppelvlakke wat opgestel is om by\n"
-"herlaaityf te begin."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS is 'n populêre protokol vir lêerdeling oor TCP/IP netwerke.\n"
-"Hierdie diens voorsien NFS-bedienerfunksionaliteit. Dit word via\n"
-"die /etc/exports lêer opgestel."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS is 'n populêre protokol vir lêerdeling oor TCP/IP netwerke.\n"
-"Hierdie diens vorosien die NFS-lêersluitfunksionaliteit."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Ondersteun die OKI-4W en aanpasbare WIN-drukkers"
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA is gewoonlik nodig om ondersteuning te verleen aan\n"
-"toestelle soos ethernet en modems in skootrekenaars. Dit sal nie\n"
-"gelaai word, behalwe as dit konfigureer is nie en dit is derhalwe\n"
-"veilig om op rekenaars te hê wat dit nie nodig het nie."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper bestuur RPC-konneksies wat deur protokolle soos NFS en NIS\n"
-"gebruik word. Portmap moet loop op rekenaars wat as bedieners vir hierdie\n"
-"protokolle, en ander protokolle wat die RPC meganisme gebruik, dien."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"POstfix is 'n E-posoordragagent (MTA). Dit is die program wat E-pos\n"
-"van een bediener na 'n ander oordra."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Stoor en herstel die stelselentropiepoel vir hoë kwaliteit,\n"
-"lukraaknommergenerasie."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Die 'routed' diensprogram hanteer outomatiese IP-roeteertabelopdatering\n"
-"via die RIP protokol. Alhoewel RIP baie gebruik word in klein netwerke, is\n"
-"meer komplekse protokolle nodig vir komplekse netwerke."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Die 'rstat' protokol laat gebruikers op 'n netwerk toe om\n"
-"werksverrigtinginligting oor enige rekenaar op die netwerk te onttrek."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Die 'rusers' protokol laat netwerkgebruikers toe om te bepaal wie\n"
-"aangeteken is op ander samewerkende rekenaars."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Die 'rwho' protokol laat eksterne gebruikers toe om te sien wie\n"
-"ingeteken is op 'n rkeneaar wat die 'rwho' diensprogram loop.  (Amper soos "
-"'finger')."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Laai die klankstelsel op u rekenaar"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog is die fasiliteit wat baie diensprogramme gebruik om boodskappe\n"
-"te log na 'n verskeidenheid loglêers. Dit is altyd goed om syslog te loop."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Laai die drywers vir u USB-toestelle"
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Laai die X-fontbediener (dis nodig vir XFree)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Kies watter dienste moet outomaties begin met herlaaityd."
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "Druk"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "Stelselmode"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Eksterne lpd drukkeropsies"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Datbasis"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Dienste"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "aktief"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "onaktief"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "met herlaai"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Installeer pakket %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ek kan nie u partisietabel lees nie, dit is te korrup.\n"
-"Ek sal die nodige partisies skoonmak."
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "Fout!"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ek kan nie die nodige herlaaibeeld '%s' kry nie."
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "Outoinstallasiekonfigurasieprogram"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "Outomatiese Stappe Konfigurasie"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Geluk!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Die floppie is sukselvol geskep.\n"
-"U kan nou weer 'n installasie uitspeel."
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Internetkonneksiedeling"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetkonneksiedeling is ontsper"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
-"Dis tans aktief.\n"
-"\n"
-"Wat wil u doen?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "deaktiveer"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "ignoreer/sien oor"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "herkonfigureer"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Bedieners word gedeaktiveer..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Internetkonneksiedeling is gedeaktiveer"
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internetkonneksiedeling is gesper"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
-"Dis tans gedeaktiveer.\n"
-"\n"
-"Wat wil u doen?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "Aktiveer"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Bedieneers word aktiveer..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Internetkonneksiedeling is geaktiveer"
-
-#: ../../standalone/drakgw_.c:182
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Nou dat u internetkonfigurasie opgestel is,\n"
-"moet u die rekenaar opstel om dit te deel.\n"
-"LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
-"stel.\n"
-"\n"
-"Wil u internetdeling opstel?\n"
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Koppelvlak %s (met module %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Koppelvlak %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Geen ethernetkaart is op die stelsel gevind nie. Gebruik asb. die "
-"hardewarekonfigurasieprogram."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Netwerkkoppelvlak"
-
-#
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Daar is net een konfigureerde netwerkkaart op u stelsel.\n"
-"\n"
-"%s\n"
-"\n"
-"Ek gaan nou u LAN met daardie kaart opstel."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Kies asb. die netwerkkaart wat aan die loakel area netwerk gekoppel is."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Waarskuwing! Die netwerkkaart is alreeds opgestel. Ek gaan dit "
-"herkonfigureer?"
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Moontlike LAN-adresbotsing gevind in konfigurasie %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Vuurmuurkonfigurasie gevind!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Waarskuwing! 'n Bestaande vuurmuurkonfigurasie is bespeur. U sal dalk na "
-"dietyd self regstellings moet aanbring."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Konfigurasie in aabou..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Skrips word konfigureer, sagterware installeer en bedieners afgeskop..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Probleme met Installasue van pakket %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Die opstelling van is alreeds gedoen, maar is tans gedeaktiveer."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Die opstelling is alreeds gedoen en is alreeds ook geaktiveer."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Geen internetkonneksiedeling is al gekonfigureer nie."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Internetkonneksiedelingkonfigurasie"
-
-#: ../../standalone/drakgw_.c:631
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Internetkonneksiedeling"
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netwerkkonfigurasie (%d toestelle)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profiel:"
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Vee profiel uit..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Profiel om uit te vee..."
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Nuwe profiel..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Bedienernaam:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Internettoegang"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Tipe:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Portaal:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Koppelvlak:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Gekonnekteer"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Nie gekonnekteer nieKabelkonneksie"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Konnekteer..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Diskonnekteer..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Konneksie word begin..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Konneksie word afgesluit..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Die stelsel is nou ontkoppel."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Konfigureer internettoegang..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "LAN-konfigurasie"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Drywer"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Koppelvlak"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "Toestand"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Stel plaaslike netwerk op..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Pas toe"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Wag asb... Konfigurasie word toegpas"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "LAN konfigurasie"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Toestel %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Herlaaiprotokol"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Gelaai tydens herlaaityd"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP-kliënt"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "Aktiveer nou dadelik"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "deaktiveer nou dadelik"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Internetkonneksiekonfigurasie"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Internetkonneksiekonfigurasie"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Konneksietipe:"
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parameters"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Ethernetkaart"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP-Kliënt"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Krakers welkom"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Swak"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoïes"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Hierdie vlak moet met sorg gebruik word. Dit maak 'n stelsel baie maklik\n"
-"om te gebruik, maar is baie sensitief. Dit moet nie gebruik vir 'n rekenaar\n"
-"wat aan ander rekenaars of die internet gekoppel is nie. Daar is geen "
-"wagwoord\n"
-"toegang nie."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Wagwoorde is nou ontsper, maar gebruik as 'n netwerkrekenaar word nie "
-"aanbeveel nie."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"'n Aantal verbetering op heirdie sekuriteitsvlak, die hoof een is meer\n"
-"sekuriteitswaarskuwings en -toetse."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Hierdie is die standaard sekuriteitsvlak wat aanbeveel word vir rekenaars\n"
-"wat aan die internet as 'n kliënt konnekteer. Daar is heelwat "
-"sekuriteitstoetse."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Met hierdie sekuriteitsvlak, kan die stelsel as 'n bediener gebruik word.\n"
-"Die sekuriteit is goed genoeg sodat 'n stelsel konneksies wat baie kliënte\n"
-"af kan aanvaar."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Hierdie is Vlak-4 sekuriteit, maar die stelsel is afgeslote.\n"
-"Sekuriteitseienskappe is maksimaal."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "Sekuriteitsvlak word gestel."
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Selekteer opsies vir bediener"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Sekuriteitsvlak word gestel."
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Beheersentrum"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Kies die instrument wat u wil gebruik"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "gebruik: keyboarddrake [--expert] [SleutelbordNaam]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-"Wil u hê dat die 'BackSpace' sleutel moet uitvee in die konsole ('n 'Delete' "
-"terugstuur)?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Verander CDROM"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Dit asb. die instasllasie CDROM in die aandrywer en druk OK. Indien u nie\n"
-"hieroor beskik nie, druk Kanselleer om die intydse opgradering te vermy."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kon nie die intydse opgradering begin nie !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "Geen 'serial_usb' gevind nie\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Emuleer derde knop?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Vuurmuurkonfigurasie"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Vuurmuurkonfigurasie"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Vuurmuur\n"
-"\n"
-"Kliek op Konfigureer om die standaard vuurmuur op te stel."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Kies u taal"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Kies installasieklas"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Hardeskyfdeteksie."
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Stel muistoestel op"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Kies u sleutelbord"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sekuriteit"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Stel lêerstelsels op"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formateer partisies"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Kies pakkette om te installeer"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installeer stelsel"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Voeg 'n gebruiker by"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Stel netwerk op"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfigureer dienste"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Maar 'n herlaaiskyf"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Installeer herlaaistelsel"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Stel X op"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Verlaay installasie"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurasie is voltooi. Moet ons hierdie veranderinge na skyf skryf?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Kan nie %s oopmaak nie: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Kon nie %s in skryfmode oopmaak nie: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Netwerkrekenaar (kliënt)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS, SMB, Instaan- , SSH (Bedieners)"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kantoor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome werkstasie"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Nutsprogramme vir PalmPilot en/of Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Werkstasie"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Vuurmuur/Netwerkroteerder"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domeinnaam en Netwerk Informasie Bediener (DNS/NIS)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kantoorprogramme: Woordverwerkers( kword, abiword), spreistate (kspread, "
-"gnumeric), PDF-sigprogramme, ens."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Klankprogramme: MP3- of MIDI-spelers, mengers, ens."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Boeke en HOWTO's oor Linux en Vrye Sagteware"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE werkstasie"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ens."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Hulpprogramme vir e-pos, netnuus, web, FTP en netpraat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Datbasis"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL of MySQL databasisbediener"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Hulpprogramme vir u rekenaarkonfigurasie te vergemaklik"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Klank"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Nutsprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "dokumentasie"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsole hulpprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix e-posbediener, Inn netnuusbediener"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internetstasie"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimediastasie"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfigurasie"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Addisionele grafiese werkskerms (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Die K-werkskermomgewing (KDE), die basiese grafiese omgewing met 'n "
-"versameling bygaande hulpprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafiese omgewing"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Ontwikkeling"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Hulpprogramme vir die skep en brand van CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kantoorwerkstasie"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, ens."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafiese programme soos Die GIMP"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C en C++ ontwikkelingsprogrammateke, programme en insluitlêers"
-
-#
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Netwerkrekenaarbediener"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "E-pos/Groepware/Netnuus"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Speletjiesrekenaar"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videospelers en -redigeerders"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Vermaak: Arkade, Bordspel, Strategie ens."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Stel hulpprogramme om e-pos en netnuus te lees en te stuur (pine, mutt, tin) "
-"en om ook die web deur te blaai."
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Aaaargivering, emulators, monitorprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Persoonlike finansies"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"'n Grafiese omgewing met  gebruikersvriendelike stel applikasies en "
-"werkskermhulpprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Kliëntprogramme vir 'n verkeidenheid protokolle insluitende SSH"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internetpoort"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Klank- en videospelers/redigeerders"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Ander grafiese werkskerms"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-"Redigeerders. teksverwerkers, instruksiedoppe, lêernutsprogramme, "
-"terminaalprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programme om u finansies te bestuur, soos GNUcash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Speletjies"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Persoonlike Inligtingbestuur."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD Sny"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Wetenskaplike werkstasie"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "kan nie /etc/sysconfig/autologin oopmaak vir lees nie: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Wil u die netwerk herlaai?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Stem u saam?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Ek gaan nou die netwerktoestel herlaai: \n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Ek gaan nou die netwerktoestel %s herlaai. Stem u saam?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Indien u spesifiek anders weet, is die gewone keuse \"/dev/hda\"\n"
-#~ "(primêre meester IDE-skyf) of \"/dev/sda\" (eerste SCSI-skyf)."
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Hier is die bestaande drukkertoue.\n"
-#~ "U kan byvoeg or verwyder soos nodig."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr ""
-#~ "Konneksie tydlimiet (in sekondes) [ beta, nog nie geïmplementeer nie ]"
-
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Kon nie \"%s\" die verstek drukker maak nie!"
-
-#
-#~ msgid "Test the mouse here."
-#~ msgstr "Toets die muis hier."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Kies voorkeurtaal vir installasie en stelselgebruik."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Kies die sleutelborduitleg uit die bostaande lys"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Selekteer:\n"
-#~ "\n"
-#~ "  - Afgemeet: Indien u vertroud genoeg is met GNU/Linux, kan u die "
-#~ "primêre\n"
-#~ "  gebruik van u rekenaar kies. Sien onder vir details.\n"
-#~ "\n"
-#~ "  - Kundige: Indien u vlot is in GNU/Linux en 'n hoogs aangepaste "
-#~ "installasie wil\n"
-#~ "  doen, kan u die deur die gebruik van u rekenaar te kies.\n"
-#~ "  MOET ASB. NIE HIERDIE OPSIE KIES INDIEN U NIE WEET WAT U DOEN NIE."
-
-#, fuzzy
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Die verskillende opsies vir u rekenaar se gebruik (indien u \"Afgemeet"
-#~ "\" \n"
-#~ "of  \"Kundige\" sou kies) is die volgende:\n"
-#~ "\n"
-#~ "  - Normaal: Indien die rekenaar primêr vir daaglikse kantoorgebruik is.\n"
-#~ "     Moenie programmeringspakette verwag nie.\n"
-#~ "\n"
-#~ "  - Ontwikkeling: Indien die rekenaar vir programontwikkel;ing gebruik "
-#~ "sal\n"
-#~ "     word. 'n Volledige stel kompileerders, saamstellers en ontfouters "
-#~ "sal \n"
-#~ "     opgesit word.\n"
-#~ "\n"
-#~ "  - Bediener: Indien die rekenaar primêr 'n bediener sal wees, hetsy met "
-#~ "NFS,\n"
-#~ "     SMB, drukkerbediening, NIS magtiging ens.\n"
-#~ "     Moenie vensterstelsels soos KDE en GNOME verwag nie.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "U kan nou die pakketgroepe kies wat u wil installeer of opgradeer.\n"
-#~ "\n"
-#~ "DrakX sal dan kyk of daar genoegsame spasie is vir die volledige "
-#~ "installasie.\n"
-#~ "Indien nie sal u verwittig word. Indien u voortgaan, sal van die minder "
-#~ "belangrike\n"
-#~ "pakkette nie installeer word nie.Heel onder kan u die opsie \"Individuele "
-#~ "pakketkeuses\"\n"
-#~ "kies waarna u deur meer as 'n 1000 pakkette sal moet blaai....."
-
-#, fuzzy
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Indienu al die CDs in die bogenoemde lys het, kliek OK.\n"
-#~ "Indien u geen het nie, kliek Kanselleer.\n"
-#~ "Indien sekere CDs weg is, onselekteer hulle en kliek dan OK."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "U kan nou die opbelopsie invul. Indien u\n"
-#~ "twyfel kry die korrekte inligting van u ISP."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Sleutel in:\n"
-#~ "\n"
-#~ "  - IP-adres: Indien u dit nie weet nie vra u netwerkadministrateur of "
-#~ "ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Netmasker: \"255.255.255.0\" is gewoonlik 'n goeie keuse. Indien u "
-#~ "twyfel,\n"
-#~ "     vra die netwerkadministrateur of ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Outomatiese IP: Indien u netwerk bootp of dhcp protokolle ondersteun, "
-#~ "kies\n"
-#~ "     hierdie opsie. In so 'n geval is 'n IP-adresinskrywing nie nodig "
-#~ "nie. Indien u\n"
-#~ "     twyfel, vra die netwerkadministrateur of ISP.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Indien u netwerk NIS gebruik, kies \"Gebruik NIS\". Indien u twyfel vra\n"
-#~ "die netwerkadministrateur."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "U kan nou die opbelopsie invul. Indien u\n"
-#~ "twyfel kry die korrekte inligting van u ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Indien u instaanbedieners wil gebruik, stel hulle hier op.. Indien u "
-#~ "twyfel vra\n"
-#~ "die netwerkadministrateur of ISP."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "U kan 'n kriptografiese pakket installeer indien u internetkonneksie reg "
-#~ "opgestel is.\n"
-#~ "Kies eers die spieël waar u die pakket vanaf wil aflaai en kies dan die "
-#~ "pakkette\n"
-#~ "om te installeer.\n"
-#~ "\n"
-#~ "Let wel: U moet 'n spieël en pakkette selekteer n.a.l plaaslike wetgewing."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "U kan nou die 'root' wagwoord voorsien vir u Mandrake Linux stelsel.\n"
-#~ "Die wagworod moet twee keer ingevoer word en te verfiëer dat dit\n"
-#~ "korrek is.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is die administrateur van die stelsel en is die enigste gebruiker\n"
-#~ "wat toegelaat wiord om die stelselkonfigurasie te verander. In dié lig,\n"
-#~ "kies asb. die wagwoord sorgvuldig. Ongemagtigde gebruik van die root\n"
-#~ "rekening kan uitermatiglik nadelig wees vir die integriteit van die\n"
-#~ "stelsel. Die wagwoord moet alfanumeries wees en ten minste 8 karakters\n"
-#~ "lank. MOENIE die wagwoord êrens neerskryf nie. Moet dit nie te lank of "
-#~ "te\n"
-#~ "ingwikkeld maak nie, u moet dit met min moeite onthou."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "U mag nou een of meer gewone gebruikersrekeninge skep. Dit is in\n"
-#~ "teenstelling met die bevoorregte 'root' rekening. Elke "
-#~ "gebruikersrekening\n"
-#~ "sal oor sy eie voorkeure (grafiese omgewing, programstelling, ens.) en\n"
-#~ "tuisgids (waar hierdie instellings gestoor word) beskik.\n"
-#~ "\n"
-#~ "\n"
-#~ "Derhalwe moet u in die stelsel intkeen met u eie gebruikerskode en slegs\n"
-#~ "'root' gebruik vir administratiewe doeleindes.\n"
-#~ "\n"
-#~ "Skep eerstens 'n rekening vir uself. Selfs indien u die enigste "
-#~ "gebruiker\n"
-#~ "op die stelsel sal wees, moet u NIE as 'root' vir u daaglikse gebruik\n"
-#~ "inteken NIE. 'n Onbruikbare stelsel kan net een tikfout ver weg wees.\n"
-#~ "\n"
-#~ "\n"
-#~ "Derhalwe moet u aanteken met die gebruikerskode wat u hier skep en "
-#~ "'root'\n"
-#~ "net vir admintratiewe doeleindes gebruik."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO en Grub hoof opsies is:\n"
-#~ "  - Herlaaitoestel: Stel die naam van die toestel (bv. hardeskyfpartisie\n"
-#~ "     wat die herlaaisektor bevat. Indien u spesifiek anders weet\n"
-#~ "     kies \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Wagperiode voor verstekbedryfstelsel gelaai word. Kies die syfer in\n"
-#~ "     tiendes van 'n sekonde at die herlaaistelsel moet wag.\n"
-#~ "     Hierdie is handig op stelsels wat onmiddelik die hardeskyf skop na "
-#~ "die\n"
-#~ "     sleutelbord geaktiveer is. Die herlaaistelsel sal nie wag nie indien "
-#~ "die\n"
-#~ "     wagperiode nul is.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Videomode: Kies die spesifieke VGA teksmode wat gebruik moet word "
-#~ "met\n"
-#~ "      herlaai. Die volgende waardes is beskikbaar:\n"
-#~ "      * normaal: selekteer normale 80x25 mode.\n"
-#~ "      * syfer: die ooreenstemmende teksmode."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO 'n herlaaiprogram vir SPARC. Dir kan GNU/Linux of enige ander\n"
-#~ "bedryfstelsel wat op u rekenar teenwoordig is, laai. Gewoonlik word "
-#~ "hierdie\n"
-#~ "bedryfstelsels reg bespeur en bygevoeg. Indien nie, kan u 'n inskrywing "
-#~ "maak\n"
-#~ "op hierdie skerm. Maak seker u kies die korrekte paramters.\n"
-#~ "\n"
-#~ "\n"
-#~ "U mag dalk toegang tot ander bedryfstelsels beperk, in welke geval u die "
-#~ "nodige\n"
-#~ "inskrywings kan uitvee. Maar dan het u die nodige herlaaiskywe nodig om "
-#~ "die\n"
-#~ "betrokke bedryfstelsels te laai."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO hoofkeuses is:\n"
-#~ "  - Herlaaitoestel: Waar wil u die inligting om GNU/Linux te laai plaas? "
-#~ "Die beste is\n"
-#~ "gewoonlik om \"Eerste hardeskyfsektor (MBR)\" te kies.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Wagperiode voor verstekbedryfstelsel gelaai word. Kies die syfer in\n"
-#~ "     tiendes van 'n sekonde at die herlaaistelsel moet wag.\n"
-#~ "     Hierdie is handig op stelsels wat onmiddelik die hardeskyf skop na "
-#~ "die\n"
-#~ "     sleutelbord geaktiveer is. Die herlaaistelsel sal nie wag nie indien "
-#~ "die\n"
-#~ "     wagperiode nul is."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Dit is tyd om die X-vensterstelsel op te stel. Hierdie is die kern van\n"
-#~ "die GNU/Linux grafiese omgewing. Vir hierdie doeleindes, moet u 'n "
-#~ "videokaart\n"
-#~ "en monitor kies. Meeste van hierdie stappe is outomaties en u moet net\n"
-#~ "verifiëer of dit korrek is.\n"
-#~ "\n"
-#~ "\n"
-#~ "Na konfigurasie sal X outmaties gelaai word, behalwe as u DrakX "
-#~ "andersins\n"
-#~ "aansê. Indien die stelling u nie pas nie, kom terug en verander so veel\n"
-#~ "keer soos nodig."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Indien iets verkeerd is in die X-konfigurasie, gebruik hierdie opsies om\n"
-#~ "die X-vensterstelsel reg op te stel."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Indien u verkies om 'n grafiese intekenarea te kry, kies \"Ja\", "
-#~ "andersins \"Nee\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "U stelsel gaan nou herlaai.\n"
-#~ "\n"
-#~ "U nuwe Mandrake Linux stelsel sal outomaties laai. Indien u 'n ander\n"
-#~ " bedryfstelsel wil laai, lees die ekstra instruksies noukeurig deur."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Skryf /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "Herstel vanaf lêer"
-
-#~ msgid "Save in file"
-#~ msgstr "Stoor in lêer"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Herstel vanaf floppie"
-
-#~ msgid "Format all"
-#~ msgstr "Formatteer almal"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Na formatering van alle partisies"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "alle data om hierdie partisies sal verloor word"
-
-#~ msgid "Reload"
-#~ msgstr "Herlaai"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Wil u 'n outoinstallasieskyf maak vir Linux replikasie?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL konfigurasie"
-
-#, fuzzy
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Met 'n eksterne CUPS-bediener, hoef u glad nie 'n drukker hier\n"
-#~ "op te stel nie; drukkers wod outomaties bespeur.\n"
-#~ "Indien u twyfel, kies \"Eksterne CUPS-bediener\"."
-
-#~ msgid "Remote queue"
-#~ msgstr "Eksterne drukkertou"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Eksterne tounaam ontbreek!"
-
-#~ msgid "Command line"
-#~ msgstr "Instruksielyn"
-
-#~ msgid "Modify printer"
-#~ msgstr "Verander drukker"
-
-#~ msgid "start it"
-#~ msgstr "Laai dit"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Netwerkmonitor"
-
-#~ msgid "Profile "
-#~ msgstr "Profiel"
-
-#~ msgid "Connection Time: "
-#~ msgstr "Konneksietyd"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Internetkonneksie"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Internetdiskonneksie"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Diskonnekteer van die internet het misluk."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Diskonneksie van die internet sukssevol"
-
-#~ msgid "Connection complete."
-#~ msgstr "Konneksie suksesvol"
-
-#~ msgid "Color configuration"
-#~ msgstr "Kleurkonfigurasie"
-
-#~ msgid "Connect"
-#~ msgstr "Konnekteer"
-
-#~ msgid "Disconnect"
-#~ msgstr "Diskonnekteer"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Verstek loopvlak"
-
-#~ msgid "Europe"
-#~ msgstr "Europa"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "Verwyder tou"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Konfigurasielêerinhoud is onverstaanbaar"
-
-#~ msgid "Adapter"
-#~ msgstr "Toestel"
-
-#~ msgid "Disable network"
-#~ msgstr "Sper netwerkstelsel"
-
-#~ msgid "Enable network"
-#~ msgstr "Aktiveer netwerk"
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (of ADSL) konneksie"
-
-#~ msgid "Choose"
-#~ msgstr "kies"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "U kan die URI, om die drukker via CUPS te gebruik, direk spesifiseer"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Ja, druk ASCII toetsbladsy"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Ja, druk die PostScript toetsbladsy"
-
-#~ msgid "Paper Size"
-#~ msgstr "Papiergrootte"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Stoot papier uit na voltooiing?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint-dryweropsies"
-
-#~ msgid "Color depth options"
-#~ msgstr "Kleurdiepte opsies"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Druk teks as PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Korrigeer trapsgewyse teks?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Aantal bladsye per uitsetblad?"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Regs/Links kantlyne in punte (1/72 van 'n duim)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Bo/Onder kantlyne in punte (1/72 van 'n duim)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Ekstra GhostScriptopsies"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Ekstra teksopsies"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Omgekeerde bladsyorde"
-
-#~ msgid "CUPS starting"
-#~ msgstr "CUPS word gelaai"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Kies eksterne drukkerkonneksie"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Elke drukker benodig 'n naam (bv. lp)\n"
-#~ "Ander parameters soos 'n beskrywing en 'n ligging kan ook gegee word.\n"
-#~ "Wat is die drukker se naam en wat is die konneksietipe?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Elke drukkertou (waar drukstukke heengaan) het 'n naam nodig \n"
-#~ "(baie keer 'lp') and 'n gekoppelde spoelgids. Watter naam en\n"
-#~ "spoelgids moet gebruik word?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Tounaam"
-
-#~ msgid "Spool directory"
-#~ msgstr "Spoelgids"
-
-#~ msgid "Disable"
-#~ msgstr "Deaktiveer"
-
-#~ msgid "Enable"
-#~ msgstr "Aktiveer"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Om 'n veiliger stelsel te bou, moet u \"Gebruik skadulêer\" \n"
-#~ "en \"Gebruik MD5 wagwoorde\" kies."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Indien u netwerk NIS wil gebruik, kies \"Gebruik NIS\" hier. Indien u "
-#~ "twyfel vra\n"
-#~ "die sysadmin.."
-
-#~ msgid "yellow pages"
-#~ msgstr "geelbladsye"
-
-#~ msgid "Light configuration"
-#~ msgstr "Ligte konfigurasie"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Voorsiener DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Voorsiener DNS 2"
-
-#, fuzzy
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Wil u nou aan die internet konnekteer?"
-
-#, fuzzy
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "Konfigurasie"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Selekteer lOer"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Konfigureer internetkonneksie"
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "Stel X op"
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Stel netwerk op"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Hierdie skrip laai de nodige modules vir 'n USB-muis."
-
-#, fuzzy
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Nou dat u internetkonfigurasie opgestel is,\n"
-#~ "moet u die rekenaar opstel om dit te deel.\n"
-#~ "LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
-#~ "stel.\n"
-#~ "\n"
-#~ "Wil u internetdeling opstel?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Outomatiese afhanklikhede"
-
-#, fuzzy
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Stel X op"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Maar 'n herlaaiskyf"
-
-#~ msgid "Format floppy"
-#~ msgstr "Formatteer floppie"
-
-#~ msgid "Choice"
-#~ msgstr "Keuse"
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "U kan nou 'n paar diverse opsies vir u stelsel kies.\n"
-#~ "\n"
-#~ "  - Optimeer hardeskyf. Hierdie kan hardeskyfwerksverrigting verbeter, "
-#~ "maar is net\n"
-#~ "     vir kundige gebruikers bedoel. Sekere gebroke koppelvlakke kan data "
-#~ "ruïneer.\n"
-#~ "     Die bedryfstelsel kern het 'n swartlys van hardeskywe, maar indien u "
-#~ "onaangename\n"
-#~ "     verrassings wil voorkom los hierdie opsie uit.\n"
-#~ "\n"
-#~ "  - Sekuriteitsvlak: Lees die handleiding vir volledigheid, maar in "
-#~ "kort:\n"
-#~ "     Kies \"Medium\" indien u twyfel. Vir 'n hoogs veilige stelsel kies "
-#~ "\"Paranoïes\",\n"
-#~ "     maar pasop: OP HIERDIE VLAK KLAN SELFS NIE 'ROOT' OP DIE KONSOLE\n"
-#~ "     AANTEKEN NIE. Vir 'root' toegang moet 'n gewone gebruiker eers "
-#~ "aanteken en dan\n"
-#~ "     \"su\". Dit is uitsluitlik vir 'n bediener bedoel.\n"
-#~ "\n"
-#~ "  - Presiese geheuegrootte: Daar is geen ongelukkig standaard metode om "
-#~ "die geheuegrootte\n"
-#~ "     uit die BIOS te bepaal nie. Soms sal Linux nie die grootte korrek "
-#~ "bepaal nie. In hierdie geval\n"
-#~ "     kan die korrekte grootte her gegee word. Let daarop dat 'n verskil "
-#~ "van 2-4MB normaal is.\n"
-#~ "\n"
-#~ "  - Outohegting van verwyderbare media: Indien u nie elke keer die "
-#~ "hegting per intik wil doen\n"
-#~ "     nie (van CDROMs, floppies, ZIpaandrywers ens.), selekteer hierdie "
-#~ "opsie.\n"
-#~ "\n"
-#~ "  - NumLock: Indien u NumLock wil aansit by herlaaityd, selekteer hierdie "
-#~ "opsie. Dit sal\n"
-#~ "     nie noodwendig NumLock onder X aansit nie."
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Arbitrêre items"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Diverse vrae"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "U kan nie supermount in  hoë sekuriteitsvlak gebruik nie."
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Warskuwing: IN HIERDIE SEKURITEITSVLAK, kan ROOT nie by die KONSOLE "
-#~ "AANTEKEN nie.\n"
-#~ "OM 'root' te wees moet u eers as 'n gewone gebruiker aanteken en dan 'su'."
-#~ "Hierdie is spesifiek vir bedienergebruik. U is gewaarsku!"
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Wees versigtig, met NumLock aan sal heelwat sleutels as syfers eerder as "
-#~ "karakters na vore kom. (Bv 'n 'p' mag dalk '6' wees)"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Eerste DNS bediener"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Tweede DNS bediener"
-
-#~ msgid "loopback"
-#~ msgstr "teruglus"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Watter herlaaistelsel(s) verlang u?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Outoinstallasieskyf"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Soekj vir 'n modem?"
-
-#~ msgid "Configure local network"
-#~ msgstr "Stel netwerk op"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr "Plaaslike netwerk is alreeds opgestel: Wil u?"
-
-#~ msgid "Multimedia"
-#~ msgstr "Multimedia"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Konfigureer tydsone"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(kan data korrupteer)"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "gebruik hardeksyfoptimisasie?"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Aansit van NumLock met herlaai"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Bevestig wagwoord"
-
-#~ msgid "default"
-#~ msgstr "verstek"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Waarvoor word u stelsel gebruik?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Kies die grootte van die installasie"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Gebruik diskdrake"
-
-#
-#~ msgid "Customized"
-#~ msgstr "Gespesialiseerde"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Is u 'n kundige? U sal sal toegelaat word om kragtige, maar\n"
-#~ "gevaarlike keuses uit te oefen\n"
-#~ "\n"
-#~ "U sal vrae gevra word soos: \"Gebruik skaduwagwoorde?\"\n"
-#~ "Is u reg vir sulke vrae?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Gebruik skadulêer"
-
-#~ msgid "shadow"
-#~ msgstr "skadu's"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Gebruik MD5 wagwoorde"
-
-#~ msgid "Search"
-#~ msgstr "Soek"
-
-#~ msgid "Package"
-#~ msgstr "Pakket"
-
-#~ msgid "Text"
-#~ msgstr "Teks"
-
-#~ msgid "Tree"
-#~ msgstr "Boom"
-
-#~ msgid "Sort by"
-#~ msgstr "Gesorteer volgens"
-
-#~ msgid "Category"
-#~ msgstr "Kategorie"
-
-#~ msgid "See"
-#~ msgstr "Sien"
-
-#~ msgid "Installed packages"
-#~ msgstr "Installeerde pakkette"
-
-#~ msgid "Available packages"
-#~ msgstr "Beskikbare pakkette"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Wys net eindnodes"
-
-#~ msgid "Expand all"
-#~ msgstr "Maak boom oop"
-
-#~ msgid "Collapse all"
-#~ msgstr "Maak boom toe"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Voeg pakketareas by"
-
-#~ msgid "Update location"
-#~ msgstr "Dateer ligging op"
-
-#~ msgid "Find Package"
-#~ msgstr "Soek pakket"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Soek pakket met lêer"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Skakel tussen installeerde en beskikbare"
-
-#~ msgid "Choose package to install"
-#~ msgstr "Kies pakket om te installeer"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Afhanklikhede word getoets"
-
-#~ msgid "Wait"
-#~ msgstr "Wag"
-
-#
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Die volgende pakkette gaan verwyder word"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "Deïnstallasie van RPMs"
-
-#~ msgid "Regexp"
-#~ msgstr "Regex"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Watter pakket soek vir"
-
-#~ msgid "%s not found"
-#~ msgstr "%s is nie gevind nie"
-
-#~ msgid "No match"
-#~ msgstr "Geen treffer"
-
-#~ msgid "No more match"
-#~ msgstr "Niks meer treffers nie"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake is in lae-geheue opstelling.\n"
-#~ "Ek gaan rpmdrake herlaai om soektogte toe te laat."
-
-#
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Watter lêer verlang u?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Wat soek vir?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Gee 'n (engelse) naam (bv. 'extra')"
-
-#~ msgid "Directory"
-#~ msgstr "Lêergids"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Geen cdrom beskikbaar nie (niks in /mnt/cdrom nie)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL van die lêergids met die RPM's"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Vir FTP en HTTP, moet die pad vir die hdlist gegee word\n"
-#~ "Dit moet relatief tot bg. URL wees."
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Voorsien asb. die volgende inligting"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s is lareeds in gebruik"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Die RPM's se basis word opgedateer"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Inskrywing %s gaan verwyder word"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Eindnodes word gesoek"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Soek van eindnodes neem 'n tydjie"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Ek het 'n ISDN-kaart gevind\n"
-
-#~ msgid "France"
-#~ msgstr "Frankryk"
-
-#~ msgid "Other countries"
-#~ msgstr "Ander lande"
-
-#
-#~ msgid "In which country are you located ?"
-#~ msgstr "In watter land is u?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Alcatel modem"
-
-#~ msgid "ECI modem"
-#~ msgstr "ECI modem"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr "Indien u ADSL-modem 'n Alcatel is, kies Alcatel, andersins ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "moenie pppoe gebruik  nie"
-
-#~ msgid "mandatory"
-#~ msgstr "verpligtend"
-
-#~ msgid "interesting"
-#~ msgstr "interessant"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (belangrik)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (baie oulik)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (oulik)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Aan watter seriaalpoort is u muis gekoppel?"
-
-#~ msgid "Czech"
-#~ msgstr "Tseggies"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovaaks"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "Kon nie ipchains RPM m.b.v.  urpmi installeer nie."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "Kon nie dhcp RPM m.b.v. urpmi installeer nie."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "Kon nie linuxconf RPM m.b.v. urpmi installeer nie."
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "Kon nie bind RPM m.b.v. urpmi installeer nie."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "Kon nie caching-nameserver RPM m.b.v. urpmi installeer nie.  "
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Herkonfigureer plaaslike netwerk"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr "U rekenaar is opgestel om sy internet konneksie te deel.\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "Internetkonneksiedeling is ontsper.\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Konnekteer aan die internet met  gewone modem"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Konnekteer aan die internet met ISDN"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Konnekteer aan die internet met DSL (of ADSL)"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Konnekteer aan die internet met kabel"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "Tyd, in sekondes, van onaktiwiteit voor diskonneksie.\n"
-#~ "Los oop om dié funksie te sper."
-
-#~ msgid "Germany"
-#~ msgstr "Duitsland"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Duitsland (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Wat wil u doen?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Installasie/Redding"
-
-#~ msgid "Rescue"
-#~ msgstr "Redding"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Watter partisietipe verlang u?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Selekteer:\n"
-#~ "\n"
-#~ "  - Afgemeet: Indien u vertroud genoeg is met GNU/Linux, kan u die "
-#~ "primêre\n"
-#~ "  gebruik van u rekenaar kies. Sien onder vir details.\n"
-#~ "\n"
-#~ "  - Kundige: Indien u vlot is in GNU/Linux en 'n hoogs aangepaste "
-#~ "installasie wil\n"
-#~ "  doen, kan u die deur die gebruik van u rekenaar te kies.\n"
-#~ "  MOET ASB. NIE HIERDIE OPSIE KIES INDIEN U NIE WEET WAT U DOEN NIE."
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "U kan nou kies watter partisie(s) gebruik kan word om Mandrake Linux\n"
-#~ "op te installeer indien hulle reeds bestaan (geskep uit 'n vorige "
-#~ "installasie,\n"
-#~ "of met 'n ander partisieprogram). In ander gevalle moet die partisies nog "
-#~ "geskep\n"
-#~ "word. Hierdie operasie bestan uit die logiese verdeling van die hardeskyf "
-#~ "in\n"
-#~ "aparte bruikbare areas\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u nuwe partisies moet skep, gebruik \"Outo-allokasie\" om "
-#~ "outomaties\n"
-#~ "partisies vir Linux te skep. U kan die skyf vir partisionering selekteer "
-#~ "deur\n"
-#~ "op \"hda\" te kliek vir die eerste IDE hardeskyf, hdb vir die tweede of "
-#~ "\"sda\"\n"
-#~ "vir die eerste SCSI skyf ens.\n"
-#~ "\n"
-#~ "\n"
-#~ "Twee algemene partisies is die \"root\" partisie (/), wat die wortel is\n"
-#~ "van die lêergidsstelsel, en /boot, wat die nodige lêers bevat om die\n"
-#~ "bedryfstelsel aan die gang te kry wanneer die rekenaar aangesit word.\n"
-#~ "\n"
-#~ "\n"
-#~ "Omdat die gevolge van hierdie proses onomkeerbaar is, kan partisionering "
-#~ "baie\n"
-#~ "intimiderend en stresvol vir die onervare gebruiker wees. DiskDrake maak "
-#~ "dié\n"
-#~ "proses heelwat makliker. Lees die dokumentasie en neem u tyd voor u "
-#~ "voortgaan.\n"
-#~ "\n"
-#~ "\n"
-#~ "U kan enige opsie gebruik deur die sleutelbord te gebruik. Navigeer deur "
-#~ "diepartisies met\n"
-#~ "Tab en die pyltjies. Wanneer 'n partisie gekies is, gebruik:\n"
-#~ "\n"
-#~ "- Ctrl-c om 'n partisie te skep (wanneer 'n leë partisie gekies is)\n"
-#~ "\n"
-#~ "- Ctrl-d om 'n partisie uit te vee\n"
-#~ "\n"
-#~ "- Ctrl-m om 'n partisie te heg\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Enige partisies wat nuut geskep is, moet eers formateer word voor "
-#~ "gebruik.\n"
-#~ "(Formateering beteken die skep van 'n lOerstelsel). U kan nou kies om "
-#~ "ook\n"
-#~ "bestaande partisies te herformateer en die data daarop te vernietig.\n"
-#~ "NOTA: Dit is nie nodig om alle bestaande partisies te herformateer nie,\n"
-#~ "veral indien daar data op is wat u wil hou. 'n Tipiese voorbeeld is /home."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Die gekose pakette gaan nou installeer word. Hierdie proses\n"
-#~ "sal 'n paar minute neem. Indien u 'n opgradering gekies, kan dit\n"
-#~ "nog langer neem voordat die opgradering begin."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Indien DrakX nie u muis kon vind nie, of as u wil sien\n"
-#~ "wat gedoen is, sal u moet die bg. lys van muistoestelle gepresenteer\n"
-#~ "word.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u met DrakX saamstem, spring na die afdeling wat u\n"
-#~ "verlang deur op die kierkaart links te kliek. Andersins kies\n"
-#~ "'n muistoetsel in die kieskaart wat u dink die beste klop met die\n"
-#~ "muis wat u het.\n"
-#~ "\n"
-#~ "In geval van 'n seriaalmuis, moet u ook vir DrakX die seriaalpoort\n"
-#~ "gee."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Hierdie afdeling is vir die konfigurasie van 'n lokaalareanetwerk\n"
-#~ "of 'n modem.\n"
-#~ "\n"
-#~ "Kies \"LAN\" en DrakX sal probeer om 'n Ethernetkaart in u rekenaar\n"
-#~ "te vind. PCI-kaarte sal heelwaarskynlik outomaties gevind en\n"
-#~ "inisialiseer word. Indien u 'n ISA-kaart het sal daar 'n kieslys\n"
-#~ "vertoon word waaruit u dan u kaart moet selekteer.\n"
-#~ "\n"
-#~ "\n"
-#~ "indien u Mandrake Linux installeer op 'n stelsel wat deel is van 'n\n"
-#~ "bestaande netwerk, sal due netwerk administrateur u alreeds met die\n"
-#~ "nodige inligting (IP adres, netmasker en rekenaarnaam) voorsien het.\n"
-#~ "Indien u 'n privaat netwerk opstel (sso by die huis), dan moet u die\n"
-#~ "adresse kies.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kies \"Uitbel met Modem\" en die internetkonneksie vir 'n modem\n"
-#~ "sal opgestel word. DrakX sal u modem probeer bepaal. Indien dié faal\n"
-#~ "sal u die modem en korrekte seriaalpoort moet selekteer."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "GNU/Linux kan verskeie drukkers gebruik. Elkeen van hierdie tipes\n"
-#~ "verlang 'n ander opstelling. Let asb. daarop dat die verstek drukkernaam "
-#~ "'lp' is.\n"
-#~ "U moet so 'n drukker skep.  U kan egter addisionele name bysit deur dit "
-#~ "met die '|' karakterte skei.\n"
-#~ "Derhalwe kan u dus die drukker 'n meer betekenisvolle naam ook toeken.\n"
-#~ "Die drukker met 'lp' in die naam sal die verstek drukker wees.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u drukker direk aan die rekenaar gekoppel is, selekteer\n"
-#~ "\"Lokale Drukker\". U moet dan die korrekte poort uitwys\n"
-#~ "en die gepaslike filter selekteer.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u 'n drukker om 'n ander Unix-rekenaar wil gebruik, kies\n"
-#~ "\"Eksterne lpd\". In hierdie geval moet u die naam van die drukkertou\n"
-#~ "op die ander rekenaar ken.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u toegang tot 'n SMB drukker (op 'n Windows-rekenaar) verlang,\n"
-#~ "moet u die SMB/NETBIOS naam (nie TCP/IP-naam nie) ken en moontlik ook "
-#~ "die\n"
-#~ "IP-adres. Daarby moet u ook 'n gebruikerskode, werkgroep en wagwoord en "
-#~ "die\n"
-#~ "drukkernaam voorsien. Dieselfde geld vir 'n Netware-drukker, behalwe dat "
-#~ "u\n"
-#~ "die werkgroep hoef te voorsien nie."
-
-# ../help.pm_.c:240 ../help.pm_.c:481 msgid ""
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "Dit word sterk aanbeveel dat u \"Ja\" antwoord. Indien u Windows sou\n"
-#~ "herinstalleer, sal dit die herlaaisektor oorskryf. Indien u die die "
-#~ "herlaaiskyf\n"
-#~ "gemaak het nie, sal u nie weer in GNU/Linux kan inkom nie."
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Draai u wiel!"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Vergeet van die veranderinge?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Wat is u muistipe?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "OUtomatiese resolusies"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Ek gaan nou probeer m die beskikbare resolusies te kry.\n"
-#~ "Die skerm sal 'n paar maal flits...\n"
-#~ "U kan die skerm afsit indien u wil, ek sal biep wanneer ek klaar is"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Ek kan probeer om al die beskikbare resolusies te kry (bv. 800x600).\n"
-#~ "Soms kan die rekenaar ophang.\n"
-#~ "Wil u probeer?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Geen geldige modes was gevind nie\n"
-#~ "Probeer 'n ander videokaart of monitor"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Outomatiese resolusie soektog"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "DHCP-kliënt"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB-muis"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB-muis (2 knoppe)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB-muis (3+ knoppe)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB-muis"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB-muis (2 knoppe)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB-muis (3+ knoppe)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Busmuis"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft busmuis"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech busmuis"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB Muis (3 knoppe of meer)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A of beter (seriaal)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (seriaal)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (seriaal)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (seriaal)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Generiese Muis (seriaal)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft aanpasbaar (seriaal)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Generiese 3-knopmuis (seriaal)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (seriaal)"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr ""
-#~ "Ek moet u netwerkkaart konfigureer om aan die internet te konnekteer."
-
-#~ msgid "nfs mount failed"
-#~ msgstr "NFS heg het gefaal"
-
-#~ msgid "Socket"
-#~ msgstr "Sok"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Kriptografie"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX sal konfigurasielêers maak vir beide XFree 3.3 en XFree 4.0.\n"
-#~ "By verstek sal die 4.0 bediener gebruik word indien u videokaart  "
-#~ "ondersteun. word\n"
-#~ "\n"
-#~ "Wil u XFree 3.3 behou?"
-
-#~ msgid "Configure LAN"
-#~ msgstr "Stel LAN op"
-
-#~ msgid "End configuration"
-#~ msgstr "Sluit konfigurasie af"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "Moenie netwerk opstel nie"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Wil u die netwerk vir u stelsel opstel?"
-
-#~ msgid "Show less"
-#~ msgstr "Vertoon minder"
-
-#~ msgid "Show more"
-#~ msgstr "Vertoon meer"
-
-#, fuzzy
-#~ msgid "tie"
-#~ msgstr "koppel"
-
-#~ msgid "brunette"
-#~ msgstr "brunette"
-
-#~ msgid "girl"
-#~ msgstr "meisie"
-
-#~ msgid "woman-blond"
-#~ msgstr "blondine"
-
-#, fuzzy
-#~ msgid "automagic"
-#~ msgstr "automagic"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Wat is u sleutelborduitleg?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Soek PCMCIA-kaarte?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Soek vir %s-toestelle?"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "Wil u die opbelkonneksie (modem) konfigureer?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Soek vir PCI-toestelle?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "Wortelpartisisie word gesoek."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr ""
-#~ "%s: Hierdie is nie 'n wortellêerstelsel nie, kies asb. 'n ander een."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "Watter partisie moet u wortelpartisie wees?"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "U het geen Windows-partisies nie!"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "U het nie genoeg spasie vir Lnx4win nie."
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#, fuzzy
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Welkom by %s die bedryfstelselkeuseprogram!\n"
-#~ "\n"
-#~ "Om die moontlikhede te vertoon, druk <TAB>.\n"
-#~ "\n"
-#~ "Om 'n spesifieke een te laai, tik die nodige naam en druk <ENTER> of wag\n"
-#~ "%ds en die verstek bedryfstelsel sal laai.\n"
-#~ "\n"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#, fuzzy
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Welkom by %s die bedryfstelselkeuseprogram!\n"
-#~ "\n"
-#~ "Om die moontlikhede te vertoon, druk <TAB>.\n"
-#~ "\n"
-#~ "Om 'n spesifieke een te laai, tik die nodige naam en druk <ENTER> of wag\n"
-#~ "%ds en die verstek bedryfstelsel sal laai.\n"
-#~ "\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "SILO hoofopsies"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Hier is die huidige SILO-inskrywings\n"
-#~ "U kan byvoeg or verwyder soos nodig."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Hierdie etiket is alreeds in gebruik"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "SILO installasie het gefaal a.g.v. hierdie fout: "
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX will probeer om eers te kyk vir een of meer bekende PCI\n"
-#~ "SCSI kaarte. Indien iets gevind word, en die drywers daarvoor\n"
-#~ "bekend is, sal dit outomaties bygevoeg word.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u 'n ISA SCSI kaart het, of 'n onbekende PCI SCSI kaart, of\n"
-#~ "geen SCSI kaart nie, sa; u gevra word of daar enige SCSI kaarte is.\n"
-#~ "Indien daar geen is nie, antwoord \"Nee\". Indien daar wel is, antwoord\n"
-#~ "\"Ja\" en 'n lys van kaarte sal gegee word waaruit u moet kies.\n"
-#~ "\n"
-#~ "\n"
-#~ "Na seleksie van die drywer, sal DrakX of vra vir opsies. Probeer eers\n"
-#~ "dat die drywer die hardeware ondervra; dit werk gewoonlik.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien nie, moenie die dokumentasie van u hardeware vergeet nie; ook nie\n"
-#~ "enige inligting van Windows (indien u dit gennstalleer het). Hierdie is\n"
-#~ "opsies wat u die drywer moet verskaf."
-
-#~ msgid "Shutting down"
-#~ msgstr "Stelselafsluiting"
diff --git a/perl-install/share/po/ar.po b/perl-install/share/po/ar.po
deleted file mode 100644
index 0033f54c3..000000000
--- a/perl-install/share/po/ar.po
+++ /dev/null
@@ -1,6774 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 2000 Free Software Foundation, Inc.
-# Djaghlouli Kamel <djkamel@chez.com>, 2000.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DarkeX VERSION\n"
-"POT-Creation-Date: 2001-06-02 17:16+0200\n"
-"PO-Revision-Date: 2000-11-1 13:00+0200\n"
-"Last-Translator: Djaghlouli Kamel <djkamel@chez.com>\n"
-"Language-Team: ar\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-6\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Configure all heads independantly"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:233
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:236
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:239
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "ÅÙÏÇÏ XFree"
-
-#: ../../Xconfigurator.pm_.c:240
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Graphic card"
-msgstr "È×ÇâÉ ÇäÌÑÇáêã"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Select a graphic card"
-msgstr "ÅÎÊÑ È×ÇâÉ ÇäÌÑÇáêã "
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "Choose a X server"
-msgstr "ÅÎÊÑ ÇäÎÇÏå X"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "X server"
-msgstr "ÇäÎÇÏå X"
-
-#: ../../Xconfigurator.pm_.c:309 ../../Xconfigurator.pm_.c:316
-#: ../../Xconfigurator.pm_.c:366
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:312
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Ãê ÅÙÏÇÏ ä XFree ÊïÑêÏ?"
-
-#: ../../Xconfigurator.pm_.c:324
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:326 ../../Xconfigurator.pm_.c:359
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:328 ../../Xconfigurator.pm_.c:361
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:336 ../../Xconfigurator.pm_.c:350
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:338 ../../Xconfigurator.pm_.c:352
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:371
-msgid "XFree configuration"
-msgstr "ÅÙÏÇÏ XFree"
-
-#: ../../Xconfigurator.pm_.c:416
-msgid "Select the memory size of your graphic card"
-msgstr "ÅÎÊÑ ÓÙÉ ÐÇãÑÉ È×ÇâÉ ÇäÌÑÇáêã"
-
-#: ../../Xconfigurator.pm_.c:463
-msgid "Choose options for server"
-msgstr "ÅæÊâ ÎêÇÑÇÊ ÇäÎÇÏå"
-
-#: ../../Xconfigurator.pm_.c:480
-msgid "Choose a monitor"
-msgstr "ÅÎÊÑ ÇäÔÇÔÉ"
-
-#: ../../Xconfigurator.pm_.c:480
-msgid "Monitor"
-msgstr "ÇäÔÇÔÉ"
-
-#: ../../Xconfigurator.pm_.c:483
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:490
-msgid "Horizontal refresh rate"
-msgstr "ÓÑÙÉ ÇäÊÍÏêË ÇäÃáâê"
-
-#: ../../Xconfigurator.pm_.c:491
-msgid "Vertical refresh rate"
-msgstr "ÓÑÙÉ ÇäÊÍÏêË ÇäÙåèÏê"
-
-#: ../../Xconfigurator.pm_.c:528
-msgid "Monitor not configured"
-msgstr "ÇäÔÇÔÉ ÚêÑ åïÙÏñÉ"
-
-#: ../../Xconfigurator.pm_.c:531
-msgid "Graphic card not configured yet"
-msgstr "È×ÇâÉ ÇäÌÑÇáêã ÚêÑ åïÙÏñÉ ÈÙÏ"
-
-#: ../../Xconfigurator.pm_.c:534
-msgid "Resolutions not chosen yet"
-msgstr "ÏâÉ ÇäÔÇÔÉ ÚêÑ åÎÊÇÑÉ ÈÙÏ"
-
-#: ../../Xconfigurator.pm_.c:551
-msgid "Do you want to test the configuration?"
-msgstr "çä ÊÑêÏ ÊÌÑÈÉ ÇäÅÙÏÇÏÇÊ¿"
-
-#: ../../Xconfigurator.pm_.c:555
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "ÍÐÇÑ: ÊÌÑÈÉ çÐç ÇäÈ×ÇâÉ ÇäÌÑÇáêã êïåãæ Ãæ êïËîÈð× ÍÇÓèÈã "
-
-#: ../../Xconfigurator.pm_.c:558
-msgid "Test of the configuration"
-msgstr "ÊÌÑÈÉ ÇäÅÙÏÇÏ"
-
-#: ../../Xconfigurator.pm_.c:597
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"ÍÇèä ÊÚêêÑ ÈÙÖ ÇäÎêÇÑÇÊ"
-
-#: ../../Xconfigurator.pm_.c:597
-msgid "An error has occurred:"
-msgstr "Î×Ãì ÍîÕîäî"
-
-#: ../../Xconfigurator.pm_.c:619
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "ÇäåÚÇÏÑÉ áê %d ËèÇæê"
-
-#: ../../Xconfigurator.pm_.c:630
-msgid "Is this the correct setting?"
-msgstr "çä çÐÇ ÇäÅÙÏÇÏ ÕÍêÍ¿"
-
-#: ../../Xconfigurator.pm_.c:638
-msgid "An error has occurred, try to change some parameters"
-msgstr "Î×à ÍÕä¬ ÍÇèä ÊÚêêÑ ÈÙÖ ÇäÎêÇÑÇÊ"
-
-#: ../../Xconfigurator.pm_.c:684 ../../printerdrake.pm_.c:277
-#: ../../services.pm_.c:125
-msgid "Resolution"
-msgstr "ÏâÉ ÇäÔÇÔÉ"
-
-#: ../../Xconfigurator.pm_.c:731
-msgid "Choose the resolution and the color depth"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:733
-#, c-format
-msgid "Graphic card: %s"
-msgstr "È×ÇâÉ ÇäÌÑÇáêã: %s"
-
-#: ../../Xconfigurator.pm_.c:734
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "ÇäÎÇÏå XFree86 :%s"
-
-#: ../../Xconfigurator.pm_.c:750 ../../standalone/draknet_.c:280
-#: ../../standalone/draknet_.c:283
-msgid "Expert Mode"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "Show all"
-msgstr "ÃØçÑ Çäãä"
-
-#: ../../Xconfigurator.pm_.c:794
-msgid "Resolutions"
-msgstr "ÏâÉ ÇäÔÇÔÉ"
-
-#: ../../Xconfigurator.pm_.c:1330
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1331
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "æèÙ ÇäåÇèÓ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1332
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1333
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "ÇäÔÇÔÉ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1334
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1335
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1336
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1337
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1339
-#, c-format
-msgid "Color depth: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1340
-#, c-format
-msgid "Resolution: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1342
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1343
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1362
-msgid "Preparing X-Window configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1382
-msgid "What do you want to do?"
-msgstr "åÇÐÇ ÊÑêÏ Ãæ ÊáÙä ¿"
-
-#: ../../Xconfigurator.pm_.c:1387
-msgid "Change Monitor"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1388
-msgid "Change Graphic card"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1390
-msgid "Change Server options"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1391
-msgid "Change Resolution"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1392
-msgid "Show information"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1393
-msgid "Test again"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1394 ../../bootlook.pm_.c:238
-msgid "Quit"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1402
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1423
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1443
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1446
-msgid "X at startup"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1447
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB or more"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr ""
-
-#: ../../any.pm_.c:99 ../../any.pm_.c:124
-msgid "First sector of boot partition"
-msgstr ""
-
-#: ../../any.pm_.c:99 ../../any.pm_.c:124 ../../any.pm_.c:197
-msgid "First sector of drive (MBR)"
-msgstr ""
-
-#: ../../any.pm_.c:103
-msgid "SILO Installation"
-msgstr ""
-
-#: ../../any.pm_.c:104 ../../any.pm_.c:117
-msgid "Where do you want to install the bootloader?"
-msgstr ""
-
-#: ../../any.pm_.c:116
-msgid "LILO/grub Installation"
-msgstr ""
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:142
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:130
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:131 ../../any.pm_.c:142
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:134
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:138
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:140 ../../any.pm_.c:142
-msgid "Yaboot"
-msgstr ""
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:180
-msgid "Bootloader main options"
-msgstr ""
-
-#: ../../any.pm_.c:149 ../../any.pm_.c:181
-msgid "Bootloader to use"
-msgstr ""
-
-#: ../../any.pm_.c:151
-msgid "Bootloader installation"
-msgstr ""
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:183
-msgid "Boot device"
-msgstr ""
-
-#: ../../any.pm_.c:154
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr ""
-
-#: ../../any.pm_.c:155
-msgid "Compact"
-msgstr ""
-
-#: ../../any.pm_.c:155
-msgid "compact"
-msgstr ""
-
-#: ../../any.pm_.c:156 ../../any.pm_.c:256
-msgid "Video mode"
-msgstr ""
-
-#: ../../any.pm_.c:158
-msgid "Delay before booting default image"
-msgstr ""
-
-#: ../../any.pm_.c:160 ../../any.pm_.c:741
-#: ../../install_steps_interactive.pm_.c:904 ../../netconnect.pm_.c:629
-#: ../../printerdrake.pm_.c:98 ../../printerdrake.pm_.c:132
-#: ../../standalone/draknet_.c:569
-msgid "Password"
-msgstr ""
-
-#: ../../any.pm_.c:161 ../../any.pm_.c:742
-#: ../../install_steps_interactive.pm_.c:905
-msgid "Password (again)"
-msgstr ""
-
-#: ../../any.pm_.c:162
-msgid "Restrict command line options"
-msgstr ""
-
-#: ../../any.pm_.c:162
-msgid "restrict"
-msgstr ""
-
-#: ../../any.pm_.c:164
-msgid "Clean /tmp at each boot"
-msgstr ""
-
-#: ../../any.pm_.c:165
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr ""
-
-#: ../../any.pm_.c:167
-msgid "Enable multi profiles"
-msgstr ""
-
-#: ../../any.pm_.c:171
-msgid "Give the ram size in MB"
-msgstr ""
-
-#: ../../any.pm_.c:173
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:718
-#: ../../install_steps_interactive.pm_.c:899
-msgid "Please try again"
-msgstr ""
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:718
-#: ../../install_steps_interactive.pm_.c:899
-msgid "The passwords do not match"
-msgstr ""
-
-#: ../../any.pm_.c:182
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:184
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:185
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:186
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:187
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:188
-msgid "Default OS?"
-msgstr ""
-
-#: ../../any.pm_.c:210
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-
-#: ../../any.pm_.c:220 ../../printerdrake.pm_.c:356
-msgid "Add"
-msgstr ""
-
-#: ../../any.pm_.c:220 ../../any.pm_.c:729 ../../diskdrake.pm_.c:46
-#: ../../printerdrake.pm_.c:356
-msgid "Done"
-msgstr ""
-
-#: ../../any.pm_.c:220
-msgid "Modify"
-msgstr ""
-
-#: ../../any.pm_.c:228
-msgid "Which type of entry do you want to add?"
-msgstr ""
-
-#: ../../any.pm_.c:229
-msgid "Linux"
-msgstr ""
-
-#: ../../any.pm_.c:229
-msgid "Other OS (SunOS...)"
-msgstr ""
-
-#: ../../any.pm_.c:230
-msgid "Other OS (MacOS...)"
-msgstr ""
-
-#: ../../any.pm_.c:230
-msgid "Other OS (windows...)"
-msgstr ""
-
-#: ../../any.pm_.c:250 ../../any.pm_.c:252
-msgid "Image"
-msgstr ""
-
-#: ../../any.pm_.c:253 ../../any.pm_.c:264
-msgid "Root"
-msgstr ""
-
-#: ../../any.pm_.c:254 ../../any.pm_.c:283
-msgid "Append"
-msgstr ""
-
-#: ../../any.pm_.c:258
-msgid "Initrd"
-msgstr ""
-
-#: ../../any.pm_.c:259
-msgid "Read-write"
-msgstr ""
-
-#: ../../any.pm_.c:266
-msgid "Table"
-msgstr ""
-
-#: ../../any.pm_.c:267
-msgid "Unsafe"
-msgstr ""
-
-#: ../../any.pm_.c:274 ../../any.pm_.c:279 ../../any.pm_.c:282
-msgid "Label"
-msgstr ""
-
-#: ../../any.pm_.c:276 ../../any.pm_.c:287
-msgid "Default"
-msgstr ""
-
-#: ../../any.pm_.c:284
-msgid "Initrd-size"
-msgstr ""
-
-#: ../../any.pm_.c:286
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:294
-msgid "Remove entry"
-msgstr ""
-
-#: ../../any.pm_.c:297
-msgid "Empty label not allowed"
-msgstr ""
-
-#: ../../any.pm_.c:298
-msgid "This label is already used"
-msgstr ""
-
-#: ../../any.pm_.c:317
-msgid "What type of partitioning?"
-msgstr ""
-
-#: ../../any.pm_.c:608
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr ""
-
-#: ../../any.pm_.c:609
-msgid "Do you have another one?"
-msgstr ""
-
-#: ../../any.pm_.c:610
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr ""
-
-#: ../../any.pm_.c:612 ../../interactive.pm_.c:104 ../../my_gtk.pm_.c:616
-#: ../../printerdrake.pm_.c:237
-msgid "No"
-msgstr ""
-
-#: ../../any.pm_.c:612 ../../interactive.pm_.c:104 ../../my_gtk.pm_.c:616
-msgid "Yes"
-msgstr ""
-
-#: ../../any.pm_.c:613
-msgid "See hardware info"
-msgstr ""
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:648
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr ""
-
-#: ../../any.pm_.c:649
-#, c-format
-msgid "(module %s)"
-msgstr ""
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:660
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr ""
-
-#: ../../any.pm_.c:668
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-
-#: ../../any.pm_.c:673
-msgid "Autoprobe"
-msgstr ""
-
-#: ../../any.pm_.c:673
-msgid "Specify options"
-msgstr ""
-
-#: ../../any.pm_.c:677
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr ""
-
-#: ../../any.pm_.c:683
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-
-#: ../../any.pm_.c:686
-msgid "Module options:"
-msgstr ""
-
-#: ../../any.pm_.c:697
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid "(already added %s)"
-msgstr ""
-
-#: ../../any.pm_.c:719
-msgid "This password is too simple"
-msgstr ""
-
-#: ../../any.pm_.c:720
-msgid "Please give a user name"
-msgstr ""
-
-#: ../../any.pm_.c:721
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-
-#: ../../any.pm_.c:722
-msgid "This user name is already added"
-msgstr ""
-
-#: ../../any.pm_.c:726
-msgid "Add user"
-msgstr ""
-
-#: ../../any.pm_.c:727
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-
-#: ../../any.pm_.c:728
-msgid "Accept user"
-msgstr ""
-
-#: ../../any.pm_.c:739
-msgid "Real name"
-msgstr ""
-
-#: ../../any.pm_.c:740 ../../printerdrake.pm_.c:97
-#: ../../printerdrake.pm_.c:131
-msgid "User name"
-msgstr ""
-
-#: ../../any.pm_.c:743
-msgid "Shell"
-msgstr ""
-
-#: ../../any.pm_.c:745
-msgid "Icon"
-msgstr ""
-
-#: ../../any.pm_.c:766
-msgid "Autologin"
-msgstr ""
-
-#: ../../any.pm_.c:767
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"If you don't want to use this feature, click on the cancel button."
-msgstr ""
-
-#: ../../any.pm_.c:769
-msgid "Choose the default user:"
-msgstr ""
-
-#: ../../any.pm_.c:770
-msgid "Choose the window manager to run:"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:262 ../../bootloader.pm_.c:608
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:809
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:812
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:815
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:818
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:821
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-
-#: ../../bootloader.pm_.c:825
-msgid "not enough room in /boot"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:918
-msgid "Desktop"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:920
-msgid "Start Menu"
-msgstr ""
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "ÊÌÑÈÉ ÇäÅÙÏÇÏ"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr ""
-
-#: ../../bootlook.pm_.c:81
-msgid "/File/_New"
-msgstr ""
-
-#: ../../bootlook.pm_.c:82
-msgid "<control>N"
-msgstr ""
-
-#: ../../bootlook.pm_.c:84
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../bootlook.pm_.c:85
-msgid "<control>O"
-msgstr ""
-
-#: ../../bootlook.pm_.c:87
-msgid "/File/_Save"
-msgstr ""
-
-#: ../../bootlook.pm_.c:88
-msgid "<control>S"
-msgstr ""
-
-#: ../../bootlook.pm_.c:90
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "/File/-"
-msgstr ""
-
-#: ../../bootlook.pm_.c:93
-msgid "/File/_Quit"
-msgstr ""
-
-#: ../../bootlook.pm_.c:94
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:96
-msgid "/_Options"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-msgid "/Options/Test"
-msgstr ""
-
-#: ../../bootlook.pm_.c:99
-msgid "/_Help"
-msgstr ""
-
-#: ../../bootlook.pm_.c:101
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../bootlook.pm_.c:111 ../../standalone/drakgw_.c:634
-#: ../../standalone/draknet_.c:262 ../../standalone/tinyfirewall_.c:57
-#, fuzzy
-msgid "Configure"
-msgstr "ÅÙÏÇÏ XFree"
-
-#: ../../bootlook.pm_.c:114
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../bootlook.pm_.c:121
-msgid "Lilo/grub mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:131
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:134
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "ÇäÔÇÔÉ"
-
-#: ../../bootlook.pm_.c:137
-msgid "Traditional Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:140
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:144
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:169
-msgid "Boot mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:179
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:187
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:193
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:210
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:228
-msgid "Default Runlevel"
-msgstr ""
-
-#: ../../bootlook.pm_.c:236 ../../standalone/draknet_.c:88
-#: ../../standalone/draknet_.c:120 ../../standalone/draknet_.c:184
-#: ../../standalone/draknet_.c:302 ../../standalone/draknet_.c:396
-#: ../../standalone/draknet_.c:473 ../../standalone/draknet_.c:509
-#: ../../standalone/draknet_.c:617
-msgid "OK"
-msgstr ""
-
-#: ../../bootlook.pm_.c:238 ../../install_steps_gtk.pm_.c:576
-#: ../../interactive.pm_.c:114 ../../interactive.pm_.c:269
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:357
-#: ../../my_gtk.pm_.c:360 ../../my_gtk.pm_.c:617
-#: ../../standalone/drakgw_.c:639 ../../standalone/draknet_.c:95
-#: ../../standalone/draknet_.c:127 ../../standalone/draknet_.c:295
-#: ../../standalone/draknet_.c:485 ../../standalone/draknet_.c:631
-#: ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr ""
-
-#: ../../bootlook.pm_.c:315
-msgid "can not open /etc/inittab for reading: $!"
-msgstr ""
-
-#: ../../bootlook.pm_.c:369
-msgid "can not open /etc/sysconfig/autologin for reading: $!"
-msgstr ""
-
-#: ../../bootlook.pm_.c:435 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:21 ../../diskdrake.pm_.c:462
-msgid "Create"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:22
-msgid "Unmount"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:464
-msgid "Delete"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:23
-msgid "Format"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:653
-msgid "Resize"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:462
-#: ../../diskdrake.pm_.c:518
-msgid "Type"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:24 ../../diskdrake.pm_.c:539
-msgid "Mount point"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:38
-msgid "Write /etc/fstab"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:39
-msgid "Toggle to expert mode"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:40
-msgid "Toggle to normal mode"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:41
-msgid "Restore from file"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:42
-msgid "Save in file"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:43
-msgid "Wizard"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:44
-msgid "Restore from floppy"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:45
-msgid "Save on floppy"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:49
-msgid "Clear all"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:54
-msgid "Format all"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:55
-msgid "Auto allocate"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:59
-msgid "All primary partitions are used"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:59
-msgid "I can't add any more partition"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:59
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:61
-msgid "Not enough space for auto-allocating"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:63
-msgid "Undo"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:64
-msgid "Write partition table"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:65 ../../install_steps_interactive.pm_.c:185
-msgid "More"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:116
-msgid "Ext2"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:116
-msgid "FAT"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:116
-msgid "HFS"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:116
-msgid "SunOS"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:116
-msgid "Swap"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:117
-msgid "Empty"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:117 ../../install_steps_gtk.pm_.c:407
-#: ../../mouse.pm_.c:145
-msgid "Other"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:123
-msgid "Filesystem types:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:132 ../../install_steps_gtk.pm_.c:577
-msgid "Details"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:147
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:152
-msgid "Please make a backup of your data first"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:152 ../../diskdrake.pm_.c:170
-#: ../../diskdrake.pm_.c:179 ../../diskdrake.pm_.c:570
-#: ../../diskdrake.pm_.c:592
-msgid "Read carefully!"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:155
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:170
-msgid "Be careful: this operation is dangerous."
-msgstr ""
-
-#: ../../diskdrake.pm_.c:214 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:322 ../../standalone/diskdrake_.c:66
-msgid "Error"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:238 ../../diskdrake.pm_.c:748
-msgid "Mount point: "
-msgstr ""
-
-#: ../../diskdrake.pm_.c:239 ../../diskdrake.pm_.c:298
-msgid "Device: "
-msgstr ""
-
-#: ../../diskdrake.pm_.c:240
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:244 ../../diskdrake.pm_.c:251
-#: ../../diskdrake.pm_.c:301
-msgid "Type: "
-msgstr ""
-
-#: ../../diskdrake.pm_.c:248
-msgid "Name: "
-msgstr ""
-
-#: ../../diskdrake.pm_.c:253
-#, c-format
-msgid "Start: sector %s\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:254
-#, c-format
-msgid "Size: %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:256
-#, c-format
-msgid ", %s sectors"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:258
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:259
-msgid "Formatted\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:260
-msgid "Not formatted\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:261
-msgid "Mounted\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:262
-#, c-format
-msgid "RAID md%s\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:264
-#, c-format
-msgid "Loopback file(s): %s\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:265
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:267
-#, c-format
-msgid "Level %s\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:268
-#, c-format
-msgid "Chunk size %s\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:269
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:271
-#, c-format
-msgid "Loopback file name: %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:274
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:277
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:294
-msgid "Please click on a partition"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:299
-#, c-format
-msgid "Size: %s\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:300
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:302
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:303
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:304
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:320
-msgid "Mount"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:322
-msgid "Active"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:324
-msgid "Add to RAID"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:326
-msgid "Remove from RAID"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:328
-msgid "Modify RAID"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:330
-msgid "Add to LVM"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:332
-msgid "Remove from LVM"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:334
-msgid "Use for loopback"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:341
-msgid "Choose action"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:435
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:439
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:445
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:462 ../../diskdrake.pm_.c:464
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:468
-msgid "Use ``Unmount'' first"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:469 ../../diskdrake.pm_.c:513
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:481
-msgid "Continue anyway?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:486
-msgid "Quit without saving"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:486
-msgid "Quit without writing the partition table?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:516
-msgid "Change partition type"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:517
-msgid "Which filesystem do you want?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:520 ../../diskdrake.pm_.c:780
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:537
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:538
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:542
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:561
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:563
-msgid "Formatting"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:564
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:565 ../../install_steps_interactive.pm_.c:430
-#, c-format
-msgid "Formatting partition %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:570
-msgid "After formatting all partitions,"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:570
-msgid "all data on these partitions will be lost"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:576
-msgid "Move"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:577
-msgid "Which disk do you want to move it to?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578
-msgid "Sector"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:579
-msgid "Which sector do you want to move it to?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:582
-msgid "Moving"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:582
-msgid "Moving partition..."
-msgstr ""
-
-#: ../../diskdrake.pm_.c:592
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:594
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Computing FAT filesystem bounds"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615 ../../diskdrake.pm_.c:680
-#: ../../install_interactive.pm_.c:107
-msgid "Resizing"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:643
-msgid "This partition is not resizeable"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:648
-msgid "All data on this partition should be backed-up"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:650
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:660
-msgid "Choose the new size"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:660 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:714
-msgid "Create a new partition"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:740
-msgid "Start sector: "
-msgstr ""
-
-#: ../../diskdrake.pm_.c:744 ../../diskdrake.pm_.c:819
-msgid "Size in MB: "
-msgstr ""
-
-#: ../../diskdrake.pm_.c:747 ../../diskdrake.pm_.c:822
-msgid "Filesystem type: "
-msgstr ""
-
-#: ../../diskdrake.pm_.c:750
-msgid "Preference: "
-msgstr ""
-
-#: ../../diskdrake.pm_.c:798
-msgid "This partition can't be used for loopback"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:808
-msgid "Loopback"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:818
-msgid "Loopback file name: "
-msgstr ""
-
-#: ../../diskdrake.pm_.c:844
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:845
-msgid "File already exists. Use it?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:867 ../../diskdrake.pm_.c:883
-msgid "Select file"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:876
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:884
-msgid "Warning"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:885
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:896
-msgid "Trying to rescue partition table"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:905
-msgid "device"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:906
-msgid "level"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:907
-msgid "chunk size"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:919
-msgid "Choose an existing RAID to add to"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:920 ../../diskdrake.pm_.c:946
-msgid "new"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:944
-msgid "Choose an existing LVM to add to"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:949
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:976
-msgid "Removable media automounting"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:977
-msgid "Rescue partition table"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:979
-msgid "Reload"
-msgstr ""
-
-#: ../../fs.pm_.c:88 ../../fs.pm_.c:95 ../../fs.pm_.c:101 ../../fs.pm_.c:107
-#: ../../fs.pm_.c:113
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:143
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr ""
-
-#: ../../fs.pm_.c:230
-msgid "mount failed: "
-msgstr ""
-
-#: ../../fs.pm_.c:242
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-#, fuzzy
-msgid "server"
-msgstr "ÇäÎÇÏå X"
-
-#: ../../fsedit.pm_.c:262
-msgid "Mount points must begin with a leading /"
-msgstr ""
-
-#: ../../fsedit.pm_.c:265
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:273
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:285
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:286
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:287
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:369
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:453
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:467
-msgid "You don't have any partitions!"
-msgstr ""
-
-#: ../../help.pm_.c:9
-msgid ""
-"Please choose your preferred language for installation and system usage."
-msgstr ""
-
-#: ../../help.pm_.c:12
-msgid ""
-"You need to accept the terms of the above license to continue installation.\n"
-"\n"
-"\n"
-"Please click on \"Accept\" if you agree with its terms.\n"
-"\n"
-"\n"
-"Please click on \"Refuse\" if you disagree with its terms. Installation will "
-"end without modifying your current\n"
-"configuration."
-msgstr ""
-
-#: ../../help.pm_.c:22
-msgid "Choose the layout corresponding to your keyboard from the list above"
-msgstr ""
-
-#: ../../help.pm_.c:25
-msgid ""
-"If you wish other languages (than the one you choose at\n"
-"beginning of installation) will be available after installation, please "
-"chose\n"
-"them in list above. If you want select all, you just need to select \"All\"."
-msgstr ""
-
-#: ../../help.pm_.c:30
-msgid ""
-"Please choose \"Install\" if there are no previous version of Linux-"
-"Mandrake\n"
-"installed or if you wish to use several operating systems.\n"
-"\n"
-"\n"
-"Please choose \"Update\" if you wish to update an already installed version "
-"of Linux-Mandrake.\n"
-"\n"
-"\n"
-"Depend of your knowledge in GNU/Linux, you can choose one of the following "
-"levels to install or update your\n"
-"Linux-Mandrake operating system:\n"
-"\n"
-"\t* Recommended: if you have never installed a GNU/Linux operating system "
-"choose this. Installation will be\n"
-"\t  be very easy and you will be asked only on few questions.\n"
-"\n"
-"\n"
-"\t* Customized: if you are familiar enough with GNU/Linux, you may choose "
-"the primary usage (workstation, server,\n"
-"\t  development) of your system. You will need to answer to more questions "
-"than in \"Recommended\" installation\n"
-"\t  class, so you need to know how GNU/Linux works to choose this "
-"installation class.\n"
-"\n"
-"\n"
-"\t* Expert: if you have a good knowledge in GNU/Linux, you can choose this "
-"installation class. As in \"Customized\"\n"
-"\t  installation class, you will be able to choose the primary usage "
-"(workstation, server, development). Be very\n"
-"\t  careful before choose this installation class. You will be able to "
-"perform a higly customized installation.\n"
-"\t  Answer to some questions can be very difficult if you haven't a good "
-"knowledge in GNU/Linux. So, don't choose\n"
-"\t  this installation class unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:56
-msgid ""
-"Select:\n"
-"\n"
-"  - Customized: If you are familiar enough with GNU/Linux, you may then "
-"choose\n"
-"    the primary usage for your machine. See below for details.\n"
-"\n"
-"\n"
-"  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-"    perform a highly customized installation. As for a \"Customized\"\n"
-"    installation class, you will be able to select the usage for your "
-"system.\n"
-"    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-"DOING!"
-msgstr ""
-
-#: ../../help.pm_.c:68
-msgid ""
-"You must now define your machine usage. Choices are:\n"
-"\n"
-"\t* Workstation: this the ideal choice if you intend to use your machine "
-"primarily for everyday use, at office or\n"
-"\t  at home.\n"
-"\n"
-"\n"
-"\t* Development: if you intend to use your machine primarily for software "
-"development, it is the good choice. You\n"
-"\t  will then have a complete collection of software installed in order to "
-"compile, debug and format source code,\n"
-"\t  or create software packages.\n"
-"\n"
-"\n"
-"\t* Server: if you intend to use this machine as a server, it is the good "
-"choice. Either a file server (NFS or\n"
-"\t  SMB), a print server (Unix style or Microsoft Windows style), an "
-"authentication server (NIS), a database\n"
-"\t  server and so on. As such, do not expect any gimmicks (KDE, GNOME, etc.) "
-"to be installed."
-msgstr ""
-
-#: ../../help.pm_.c:84
-msgid ""
-"DrakX will attempt to look for PCI SCSI adapter(s). If DrakX\n"
-"finds an SCSI adapter and knows which driver to use, it will be "
-"automatically\n"
-"installed.\n"
-"\n"
-"\n"
-"If you have no SCSI adapter, an ISA SCSI adapter or a PCI SCSI adapter that\n"
-"DrakX doesn't recognize, you will be asked if a SCSI adapter is present in "
-"your\n"
-"system. If there is no adapter present, you can click on \"No\". If you "
-"click on\n"
-"\"Yes\", a list of drivers will be presented from which you can select your\n"
-"specific adapter.\n"
-"\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for "
-"the\n"
-"options. This usually works well.\n"
-"\n"
-"\n"
-"If not, you will need to provide options to the driver. Please review the "
-"User\n"
-"Guide (chapter 3, section \"Collective informations on your hardware) for "
-"hints\n"
-"on retrieving this information from hardware documentation, from the\n"
-"manufacturer's Web site (if you have Internet access) or from Microsoft "
-"Windows\n"
-"(if you have it on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:108
-msgid ""
-"At this point, you need to choose where to install your\n"
-"Linux-Mandrake operating system on your hard drive. If it is empty or if an\n"
-"existing operating system uses all the space available on it, you need to\n"
-"partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Linux-Mandrake system.\n"
-"\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced "
-"user.\n"
-"This wizard simplifies this process. Before beginning, please consult the "
-"manual\n"
-"and take your time.\n"
-"\n"
-"\n"
-"You need at least two partitions. One is for the operating system itself and "
-"the\n"
-"other is for the virtual memory (also called Swap).\n"
-"\n"
-"\n"
-"If partitions have been already defined (from a previous installation or "
-"from\n"
-"another partitioning tool), you just need choose those to use to install "
-"your\n"
-"Linux system.\n"
-"\n"
-"\n"
-"If partitions haven't been already defined, you need to create them. \n"
-"To do that, use the wizard available above. Depending of your hard drive\n"
-"configuration, several solutions can be available:\n"
-"\n"
-"\t* Use existing partition: the wizard has detected one or more existing "
-"Linux partitions on your hard drive. If\n"
-"\t  you want to keep them, choose this option. \n"
-"\n"
-"\n"
-"\t* Erase entire disk: if you want delete all data and all partitions "
-"present on your hard drive and replace them by\n"
-"\t  your new Linux-Mandrake system, you can choose this option. Be careful "
-"with this solution, you will not be\n"
-"\t  able to revert your choice after confirmation.\n"
-"\n"
-"\n"
-"\t* Use the free space on the Windows partition: if Microsoft Windows is "
-"installed on your hard drive and takes\n"
-"\t  all space available on it, you have to create free space for Linux data. "
-"To do that you can delete your\n"
-"\t  Microsoft Windows partition and data (see \"Erase entire disk\" or "
-"\"Expert mode\" solutions) or resize your\n"
-"\t  Microsoft Windows partition. Resizing can be performed without loss of "
-"any data. This solution is\n"
-"\t  recommended if you want use both Linux-Mandrake and Microsoft Windows on "
-"same computer.\n"
-"\n"
-"\n"
-"\t  Before choosing this solution, please understand that the size of your "
-"Microsoft\n"
-"\t  Windows partition will be smaller than at present time. It means that "
-"you will have less free space under\n"
-"\t  Microsoft Windows to store your data or install new software.\n"
-"\n"
-"\n"
-"\t* Expert mode: if you want to partition manually your hard drive, you can "
-"choose this option. Be careful before\n"
-"\t  choosing this solution. It is powerful but it is very dangerous. You can "
-"lose all your data very easily. So,\n"
-"\t  don't choose this solution unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:160
-msgid ""
-"At this point, you need to choose what\n"
-"partition(s) to use to install your new Linux-Mandrake system. If "
-"partitions\n"
-"have been already defined (from a previous installation of GNU/Linux or "
-"from\n"
-"another partitioning tool), you can use existing partitions. In other "
-"cases,\n"
-"hard drive partitions must be defined.\n"
-"\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select "
-"the\n"
-"disk for partitioning by clicking on \"hda\" for the first IDE drive, \"hdb"
-"\" for\n"
-"the second or \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-"   * Clear all: this option deletes all partitions available on the selected "
-"hard drive.\n"
-"\n"
-"\n"
-"   * Auto allocate: this option allows you to automatically create Ext2 and "
-"swap partitions in free space of your\n"
-"     hard drive.\n"
-"\n"
-"\n"
-"   * Rescue partition table: if your partition table is damaged, you can try "
-"to recover it using this option. Please\n"
-"     be careful and remember that it can fail.\n"
-"\n"
-"\n"
-"   * Undo: you can use this option to cancel your changes.\n"
-"\n"
-"\n"
-"   * Reload: you can use this option if you wish to undo all changes and "
-"load your initial partitions table\n"
-"\n"
-"\n"
-"   * Wizard: If you wish to use a wizard to partition your hard drive, you "
-"can use this option. It is recommended if\n"
-"     you do not have a good knowledge in partitioning.\n"
-"\n"
-"\n"
-"   * Restore from floppy: if you have saved your partition table on a floppy "
-"during a previous installation, you can\n"
-"     recover it using this option.\n"
-"\n"
-"\n"
-"   * Save on floppy: if you wish to save your partition table on a floppy to "
-"be able to recover it, you can use this\n"
-"     option. It is strongly recommended to use this option\n"
-"\n"
-"\n"
-"   * Done: when you have finished partitioning your hard drive, use this "
-"option to save your changes.\n"
-"\n"
-"\n"
-"For information, you can reach any option using the keyboard: navigate "
-"trough the partitions using Tab and Up/Down arrows.\n"
-"\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-"           * Ctrl-c to create a new partition (when a empty partition is "
-"selected)\n"
-"\n"
-"           * Ctrl-d to delete a partition\n"
-"\n"
-"           * Ctrl-m to set the mount point\n"
-"           \n"
-"\n"
-"           \n"
-"If you are installing on a PPC Machine, you will want to create a small HFS "
-"'bootstrap' partition of at least 1MB for use\n"
-"by the yaboot bootloader. If you opt to make the partition a bit larger, say "
-"50MB, you may find it a useful place to store \n"
-"a spare kernel and ramdisk image for emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Above are listed the existing Linux partitions detected on\n"
-"your hard drive. You can keep choices make by the wizard, they are good for "
-"a\n"
-"common usage. If you change these choices, you must at least define a root\n"
-"partition (\"/\"). Don't choose a too little partition or you will not be "
-"able\n"
-"to install enough software. If you want store your data on a separate "
-"partition,\n"
-"you need also to choose a \"/home\" (only possible if you have more than "
-"one\n"
-"Linux partition available).\n"
-"\n"
-"\n"
-"For information, each partition is listed as follows: \"Name\", \"Capacity"
-"\".\n"
-"\n"
-"\n"
-"\"Name\" is coded as follow: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and "
-"\"sd\"\n"
-"if it is an SCSI hard drive.\n"
-"\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE "
-"hard drives:\n"
-"\n"
-"   * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-"   * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"\n"
-"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means "
-"\"secondary hard drive\", etc..."
-msgstr ""
-
-#: ../../help.pm_.c:258
-msgid ""
-"Choose the hard drive you want to erase to install your\n"
-"new Linux-Mandrake partition. Be careful, all data present on it will be "
-"lost\n"
-"and will not be recoverable."
-msgstr ""
-
-#: ../../help.pm_.c:263
-msgid ""
-"Click on \"OK\" if you want to delete all data and\n"
-"partitions present on this hard drive. Be careful, after clicking on \"OK\", "
-"you\n"
-"will not be able to recover any data and partitions present on this hard "
-"drive,\n"
-"including any Windows data.\n"
-"\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../help.pm_.c:273
-msgid ""
-"More than one Microsoft Windows partition have been\n"
-"detected on your hard drive. Please choose the one you want resize to "
-"install\n"
-"your new Linux-Mandrake operating system.\n"
-"\n"
-"\n"
-"For information, each partition is listed as follow; \"Linux name\", "
-"\"Windows\n"
-"name\" \"Capacity\".\n"
-"\n"
-"\"Linux name\" is coded as follow: \"hard drive type\", \"hard drive number"
-"\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and \"sd"
-"\"\n"
-"if it is an SCSI hard drive.\n"
-"\n"
-"\n"
-"\"Hard drive number\" is always a letter putted after \"hd\" or \"sd\". With "
-"IDE hard drives:\n"
-"\n"
-"   * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-"   * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means "
-"\"secondary hard drive\", etc.\n"
-"\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first "
-"disk\n"
-"or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:306
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:309
-msgid ""
-"Any partitions that have been newly defined must be\n"
-"formatted for use (formatting meaning creating a filesystem).\n"
-"\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to "
-"erase\n"
-"the data they contain. If you wish do that, please also select the "
-"partitions\n"
-"you want to format.\n"
-"\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing "
-"partitions.\n"
-"You must reformat the partitions containing the operating system (such as \"/"
-"\",\n"
-"\"/usr\" or \"/var\") but do you no have to reformat partitions containing "
-"data\n"
-"that you wish to keep (typically /home).\n"
-"\n"
-"\n"
-"Please be careful selecting partitions, after formatting, all data will be\n"
-"deleted and you will not be able to recover any of them.\n"
-"\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"\n"
-"Click on \"Cancel\" if you want to choose other partitions to install your "
-"new\n"
-"Linux-Mandrake operating system."
-msgstr ""
-
-#: ../../help.pm_.c:335
-msgid ""
-"You may now select the group of packages you wish to\n"
-"install or upgrade.\n"
-"\n"
-"\n"
-"DrakX will then check whether you have enough room to install them all. If "
-"not,\n"
-"it will warn you about it. If you want to go on anyway, it will proceed onto "
-"the\n"
-"installation of all selected groups but will drop some packages of lesser\n"
-"interest. At the bottom of the list you can select the option \n"
-"\"Individual package selection\"; in this case you will have to browse "
-"through\n"
-"more than 1000 packages..."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"You can now choose individually all the packages you\n"
-"wish to install.\n"
-"\n"
-"\n"
-"You can expand or collapse the tree by clicking on options in the left "
-"corner of\n"
-"the packages window.\n"
-"\n"
-"\n"
-"If you prefer to see packages sorted in alphabetic order, click on the icon\n"
-"\"Toggle flat and group sorted\".\n"
-"\n"
-"\n"
-"If you want not to be warned on dependencies, click on \"Automatic\n"
-"dependencies\". If you do this, note that unselecting one package may "
-"silently\n"
-"unselect several other packages which depend on it."
-msgstr ""
-
-#: ../../help.pm_.c:364
-msgid ""
-"If you have all the CDs in the list above, click Ok. If you have\n"
-"none of those CDs, click Cancel. If only some CDs are missing, unselect "
-"them,\n"
-"then click Ok."
-msgstr ""
-
-#: ../../help.pm_.c:369
-msgid ""
-"Your new Linux-Mandrake operating system is currently being\n"
-"installed. This operation should take a few minutes (it depends on size you\n"
-"choose to install and the speed of your computer).\n"
-"\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:377
-msgid ""
-"You can now test your mouse. Use buttons and wheel to verify\n"
-"if settings are good. If not, you can click on \"Cancel\" to choose another\n"
-"driver."
-msgstr ""
-
-#: ../../help.pm_.c:382
-msgid ""
-"Please select the correct port. For example, the COM1\n"
-"port under MS Windows is named ttyS0 under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:386
-msgid ""
-"If you wish to connect your computer to the Internet or\n"
-"to a local network please choose the correct option. Please turn on your "
-"device\n"
-"before choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"\n"
-"If you do not have any connection to the Internet or a local network, "
-"choose\n"
-"\"Disable networking\".\n"
-"\n"
-"\n"
-"If you wish to configure the network later after installation or if you "
-"have\n"
-"finished to configure your network connection, choose \"Done\"."
-msgstr ""
-
-#: ../../help.pm_.c:399
-msgid ""
-"No modem has been detected. Please select the serial port on which it is "
-"plugged.\n"
-"\n"
-"\n"
-"For information, the first serial port (called \"COM1\" under Microsoft\n"
-"Windows) is called \"ttyS0\" under Linux."
-msgstr ""
-
-#: ../../help.pm_.c:406
-msgid ""
-"You may now enter dialup options. If you don't know\n"
-"or are not sure what to enter, the correct informations can be obtained "
-"from\n"
-"your Internet Service Provider. If you do not enter the DNS (name server)\n"
-"information here, this information will be obtained from your Internet "
-"Service\n"
-"Provider at connection time."
-msgstr ""
-
-#: ../../help.pm_.c:413
-msgid ""
-"If your modem is an external modem, please turn on it now to let DrakX "
-"detect it automatically."
-msgstr ""
-
-#: ../../help.pm_.c:416
-msgid "Please turn on your modem and choose the correct one."
-msgstr ""
-
-#: ../../help.pm_.c:419
-msgid ""
-"If you are not sure if informations above are\n"
-"correct or if you don't know or are not sure what to enter, the correct\n"
-"informations can be obtained from your Internet Service Provider. If you do "
-"not\n"
-"enter the DNS (name server) information here, this information will be "
-"obtained\n"
-"from your Internet Service Provider at connection time."
-msgstr ""
-
-#: ../../help.pm_.c:426
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, the correct informations can be\n"
-"obtained from your Internet Service Provider."
-msgstr ""
-
-#: ../../help.pm_.c:431
-msgid ""
-"You may now configure your network device.\n"
-"\n"
-"   * IP address: if you don't know or are not sure what to enter, ask your "
-"network administrator.\n"
-"     You should not enter an IP address if you select the option \"Automatic "
-"IP\" below.\n"
-"\n"
-"   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-"know or are not sure what to enter,\n"
-"     ask your network administrator.\n"
-"\n"
-"   * Automatic IP: if your network uses BOOTP or DHCP protocol, select this "
-"option. If selected, no value is needed in\n"
-"    \"IP address\". If you don't know or are not sure if you need to select "
-"this option, ask your network administrator."
-msgstr ""
-
-#: ../../help.pm_.c:443
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, ask your network administrator."
-msgstr ""
-
-#: ../../help.pm_.c:447
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, leave blank."
-msgstr ""
-
-#: ../../help.pm_.c:451
-msgid ""
-"You may now enter dialup options. If you're not sure what to enter, the\n"
-"correct information can be obtained from your ISP."
-msgstr ""
-
-#: ../../help.pm_.c:455
-msgid ""
-"If you will use proxies, please configure them now. If you don't know if\n"
-"you should use proxies, ask your network administrator or your ISP."
-msgstr ""
-
-#: ../../help.pm_.c:459
-msgid ""
-"You can install cryptographic package if your internet connection has been\n"
-"set up correctly. First choose a mirror where you wish to download packages "
-"and\n"
-"after that select the packages to install.\n"
-"\n"
-"\n"
-"Note you have to select mirror and cryptographic packages according\n"
-"to your legislation."
-msgstr ""
-
-#: ../../help.pm_.c:468
-msgid "You can now select your timezone according to where you live."
-msgstr ""
-
-#: ../../help.pm_.c:471
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage\n"
-"Time) and translates it in local time according to the time zone you have\n"
-"selected.\n"
-"\n"
-"\n"
-"If you use Microsoft Windows on this computer, choose \"No\"."
-msgstr ""
-
-#: ../../help.pm_.c:479
-msgid ""
-"You may now choose which services you want to start at boot time.\n"
-"\n"
-"\n"
-"When your mouse comes over an item, a small balloon help will popup which\n"
-"describes the role of the service.\n"
-"\n"
-"\n"
-"Be very careful in this step if you intend to use your machine as a server: "
-"you\n"
-"will probably want not to start any services that you don't need. Please\n"
-"remember that several services can be dangerous if they are enable on a "
-"server.\n"
-"In general, select only the services that you really need."
-msgstr ""
-
-#: ../../help.pm_.c:492
-msgid ""
-"You can configure a local printer (connected to your computer) or remote\n"
-"printer (accessible via a Unix, Netware or Microsoft Windows network)."
-msgstr ""
-
-#: ../../help.pm_.c:496
-msgid ""
-"If you wish to be able to print, please choose one printing system between\n"
-"CUPS and LPR.\n"
-"\n"
-"\n"
-"CUPS is a new, powerful and flexible printing system for Unix systems (CUPS\n"
-"means \"Common Unix Printing System\"). It is the default printing system "
-"in\n"
-"Linux-Mandrake.\n"
-"\n"
-"\n"
-"LPR is the old printing system used in previous Linux-Mandrake "
-"distributions.\n"
-"\n"
-"\n"
-"If you don't have printer, click on \"None\"."
-msgstr ""
-
-#: ../../help.pm_.c:511
-msgid ""
-"GNU/Linux can deal with many types of printer. Each of these types requires\n"
-"a different setup.\n"
-"\n"
-"\n"
-"If your printer is physically connected to your computer, select \"Local\n"
-"printer\".\n"
-"\n"
-"\n"
-"If you want to access a printer located on a remote Unix machine, select\n"
-"\"Remote printer\".\n"
-"\n"
-"\n"
-"If you want to access a printer located on a remote Microsoft Windows "
-"machine\n"
-"(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-msgstr ""
-
-#: ../../help.pm_.c:527
-msgid ""
-"Please turn on your printer before continuing to let DrakX detect it.\n"
-"\n"
-"You have to enter some informations here.\n"
-"\n"
-"\n"
-"   * Name of printer: the print spooler uses \"lp\" as default printer name. "
-"So, you must have a printer named \"lp\".\n"
-"     If you have only one printer, you can use several names for it. You "
-"just need to separate them by a pipe\n"
-"     character (a \"|\"). So, if you prefer a more meaningful name, you have "
-"to put it first, eg: \"My printer|lp\".\n"
-"     The printer having \"lp\" in its name(s) will be the default printer.\n"
-"\n"
-"\n"
-"   * Description: this is optional but can be useful if several printers are "
-"connected to your computer or if you allow\n"
-"     other computers to access to this printer.\n"
-"\n"
-"\n"
-"   * Location: if you want to put some information on your\n"
-"     printer location, put it here (you are free to write what\n"
-"     you want, for example \"2nd floor\").\n"
-msgstr ""
-
-#: ../../help.pm_.c:548
-msgid ""
-"You need to enter some informations here.\n"
-"\n"
-"\n"
-"   * Name of queue: the print spooler uses \"lp\" as default printer name. "
-"So, you need have a printer named \"lp\".\n"
-"    If you have only one printer, you can use several names for it. You just "
-"need to separate them by a pipe\n"
-"    character (a \"|\"). So, if you prefer to have a more meaningful name, "
-"you have to put it first, eg: \"My printer|lp\".\n"
-"    The printer having \"lp\" in its name(s) will be the default printer.\n"
-"\n"
-"  \n"
-"   * Spool directory: it is in this directory that printing jobs are stored. "
-"Keep the default choice\n"
-"     if you don't know what to use\n"
-"\n"
-"\n"
-"   * Printer Connection: If your printer is physically connected to your "
-"computer, select \"Local printer\".\n"
-"     If you want to access a printer located on a remote Unix machine, "
-"select \"Remote lpd printer\".\n"
-"\n"
-"\n"
-"     If you want to access a printer located on a remote Microsoft Windows "
-"machine (or on Unix machine using SMB\n"
-"     protocol), select \"SMB/Windows 95/98/NT\".\n"
-"\n"
-"\n"
-"     If you want to acces a printer located on NetWare network, select "
-"\"NetWare\".\n"
-msgstr ""
-
-#: ../../help.pm_.c:573
-msgid ""
-"Your printer has not been detected. Please enter the name of the device on\n"
-"which it is connected.\n"
-"\n"
-"\n"
-"For information, most printers are connected on the first parallel port. "
-"This\n"
-"one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-"Windows."
-msgstr ""
-
-#: ../../help.pm_.c:581
-msgid "You must now select your printer in the above list."
-msgstr ""
-
-#: ../../help.pm_.c:584
-msgid ""
-"Please select the right options according to your printer.\n"
-"Please see its documentation if you don't know what choose here.\n"
-"\n"
-"\n"
-"You will be able to test your configuration in next step and you will be "
-"able to modify it if it doesn't work as you want."
-msgstr ""
-
-#: ../../help.pm_.c:591
-msgid ""
-"You can now enter the root password for your Linux-Mandrake system.\n"
-"The password must be entered twice to verify that both password entries are "
-"identical.\n"
-"\n"
-"\n"
-"Root is the system's administrator and is the only user allowed to modify "
-"the\n"
-"system configuration. Therefore, choose this password carefully. \n"
-"Unauthorized use of the root account can be extemely dangerous to the "
-"integrity\n"
-"of the system, its data and other system connected to it.\n"
-"\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. It should never be written down.\n"
-"\n"
-"\n"
-"Do not make the password too long or complicated, though: you must be able "
-"to\n"
-"remember it without too much effort."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"To enable a more secure system, you should select \"Use shadow file\" and\n"
-"\"Use MD5 passwords\"."
-msgstr ""
-
-#: ../../help.pm_.c:613
-msgid ""
-"If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n"
-"network administrator."
-msgstr ""
-
-#: ../../help.pm_.c:617
-msgid ""
-"You may now create one or more \"regular\" user account(s), as\n"
-"opposed to the \"privileged\" user account, root. You can create\n"
-"one or more account(s) for each person you want to allow to use\n"
-"the computer. Note that each user account will have its own\n"
-"preferences (graphical environment, program settings, etc.)\n"
-"and its own \"home directory\", in which these preferences are\n"
-"stored.\n"
-"\n"
-"\n"
-"First of all, create an account for yourself! Even if you will be the only "
-"user\n"
-"of the machine, you may NOT connect as root for daily use of the system: "
-"it's a\n"
-"very high security risk. Making the system unusable is very often a typo "
-"away.\n"
-"\n"
-"\n"
-"Therefore, you should connect to the system using the user account\n"
-"you will have created here, and login as root only for administration\n"
-"and maintenance purposes."
-msgstr ""
-
-#: ../../help.pm_.c:636
-msgid ""
-"Creating a boot disk is strongly recommended. If you can't\n"
-"boot your computer, it's the only way to rescue your system without\n"
-"reinstalling it."
-msgstr ""
-
-#: ../../help.pm_.c:641
-msgid ""
-"You need to indicate where you wish\n"
-"to place the information required to boot to GNU/Linux.\n"
-"\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of\n"
-"drive (MBR)\"."
-msgstr ""
-
-#: ../../help.pm_.c:649
-msgid ""
-"Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-" (primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-msgstr ""
-
-#: ../../help.pm_.c:653
-msgid ""
-"LILO (the LInux LOader) and Grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"You may also want not to give access to these other operating systems to\n"
-"anyone, in which case you can delete the corresponding entries. But\n"
-"in this case, you will need a boot disk in order to boot them!"
-msgstr ""
-
-#: ../../help.pm_.c:665
-msgid ""
-"LILO and grub main options are:\n"
-"  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-"partition) that contains the boot sector. Unless you know specifically\n"
-"otherwise, choose \"/dev/hda\".\n"
-"\n"
-"\n"
-"  - Delay before booting default image: Specifies the number in tenths\n"
-"of a second the boot loader should wait before booting the first image.\n"
-"This is useful on systems that immediately boot from the hard disk after\n"
-"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-"omitted or is set to zero.\n"
-"\n"
-"\n"
-"  - Video mode: This specifies the VGA text mode that should be selected\n"
-"when booting. The following values are available: \n"
-"\n"
-"    * normal: select normal 80x25 text mode.\n"
-"\n"
-"    * <number>:  use the corresponding text mode.\n"
-"\n"
-"\n"
-"  - Clean \"/tmp\" at each boot: if you want delete all files and "
-"directories\n"
-"stored in \"/tmp\" when you boot your system, select this option.\n"
-"\n"
-"\n"
-"  - Precise RAM if needed: unfortunately, there is no standard method to ask "
-"the\n"
-"BIOS about the amount of RAM present in your computer. As consequence, Linux "
-"may\n"
-"fail to detect your amount of RAM correctly. If this is the case, you can\n"
-"specify the correct amount or RAM here. Please note that a difference of 2 "
-"or 4\n"
-"MB between detected memory and memory present in your system is normal."
-msgstr ""
-
-#: ../../help.pm_.c:697
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n"
-"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"Yaboot main options are:\n"
-"\n"
-"\n"
-"  - Init Message: A simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-"\n"
-"  - Boot Device: Indicate where you want to place the information required "
-"to \n"
-"boot to GNU/Linux. Generally, you will have setup a bootstrap partition "
-"earlier \n"
-"to hold this information.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: Unlike LILO, there are two delays available with \n"
-"yaboot.  The first delay is measured in seconds and at this point you can \n"
-"choose between CD, OF boot, MacOS, or Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: This timeout is similar to the LILO boot delay.  "
-"After \n"
-"selecting Linux, you will have this delay in 0.1 seconds before your "
-"default\n"
-"kernel description is selected.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: Checking this option will allow you to choose 'C' for "
-"CD at\n"
-"the first boot prompt.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: Checking this option will allow you to choose 'N' for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-"\n"
-"  - Default OS: You can select which OS will boot by default when the Open "
-"Firmware \n"
-"Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:738
-msgid ""
-"You can add additional entries for yaboot, either for other operating "
-"systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"\n"
-"For other OS's - the entry consists only of a label and the root partition.\n"
-"\n"
-"\n"
-"For Linux, there are a few possible options: \n"
-"\n"
-"\n"
-"  - Label: This is simply the name will type at the yaboot prompt to select "
-"this \n"
-"boot option.\n"
-"\n"
-"\n"
-"  - Image: This would be the name of the kernel to boot.  Typically vmlinux "
-"or\n"
-"a variation of vmlinux with an extension.\n"
-"\n"
-"\n"
-"  - Root: The root device or '/' for your Linux installation.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: On Apple hardware, the kernel append option is used quite often "
-"to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button "
-"emulation\n"
-"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The "
-"following \n"
-"are some examples:\n"
-"\n"
-"\n"
-"\t\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: This option can be used either to load initial modules, before "
-"the boot \n"
-"device is available, or to load a ramdisk image for an emergency boot "
-"situation.\n"
-"\n"
-"\n"
-"  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you "
-"should need\n"
-"to allocate a large ramdisk, this option can be used.\n"
-"\n"
-"\n"
-"  - Read-write: Normally the 'root' partition is initially brought up read-"
-"only, to allow\n"
-"a filesystem check before the system becomes 'live'.  You can override this "
-"option here.\n"
-"\n"
-"\n"
-"  - NoVideo: Should the Apple video hardware prove to be exceptionally "
-"problematic, you can\n"
-"select this option to boot in 'novideo' mode, with native framebuffer "
-"support.\n"
-"\n"
-"\n"
-"  - Default: Selects this entry as being the default Linux selection, "
-"selectable by just\n"
-"pressing ENTER at the yaboot prompt.  This entry will also be highlighted "
-"with a '*', if you\n"
-"press TAB to see the boot selections."
-msgstr ""
-
-#: ../../help.pm_.c:793
-msgid ""
-"SILO is a bootloader for SPARC: it is able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"You may also want not to give access to these other operating systems to\n"
-"anyone, in which case you can delete the corresponding entries. But\n"
-"in this case, you will need a boot disk in order to boot them!"
-msgstr ""
-
-#: ../../help.pm_.c:805
-msgid ""
-"SILO main options are:\n"
-"  - Bootloader installation: Indicate where you want to place the\n"
-"information required to boot to GNU/Linux. Unless you know exactly\n"
-"what you are doing, choose \"First sector of drive (MBR)\".\n"
-"\n"
-"\n"
-"  - Delay before booting default image: Specifies the number in tenths\n"
-"of a second the boot loader should wait before booting the first image.\n"
-"This is useful on systems that immediately boot from the hard disk after\n"
-"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-"omitted or is set to zero."
-msgstr ""
-
-#: ../../help.pm_.c:818
-msgid ""
-"Now it's time to configure the X Window System, which is the\n"
-"core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-"you must configure your video card and monitor. Most of these\n"
-"steps are automated, though, therefore your work may only consist\n"
-"of verifying what has been done and accept the settings :)\n"
-"\n"
-"\n"
-"When the configuration is over, X will be started (unless you\n"
-"ask DrakX not to) so that you can check and see if the\n"
-"settings suit you. If they don't, you can come back and\n"
-"change them, as many times as necessary."
-msgstr ""
-
-#: ../../help.pm_.c:831
-msgid ""
-"If something is wrong in X configuration, use these options to correctly\n"
-"configure the X Window System."
-msgstr ""
-
-#: ../../help.pm_.c:835
-msgid ""
-"If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n"
-"\"No\"."
-msgstr ""
-
-#: ../../help.pm_.c:839
-msgid ""
-"You can choose a security level for your system. Please refer to the manual "
-"for complete\n"
-"  information. Basically, if you don't know what to choose, keep the default "
-"option.\n"
-msgstr ""
-
-#: ../../help.pm_.c:844
-msgid ""
-"Your system is going to reboot.\n"
-"\n"
-"After rebooting, your new Linux Mandrake system will load automatically.\n"
-"If you want to boot into another existing operating system, please read\n"
-"the additional instructions."
-msgstr ""
-
-#: ../../install2.pm_.c:37
-msgid "Choose your language"
-msgstr ""
-
-#: ../../install2.pm_.c:38
-msgid "Select installation class"
-msgstr ""
-
-#: ../../install2.pm_.c:39
-msgid "Hard drive detection"
-msgstr ""
-
-#: ../../install2.pm_.c:40
-msgid "Configure mouse"
-msgstr ""
-
-#: ../../install2.pm_.c:41
-msgid "Choose your keyboard"
-msgstr ""
-
-#: ../../install2.pm_.c:42
-msgid "Security"
-msgstr ""
-
-#: ../../install2.pm_.c:43
-msgid "Setup filesystems"
-msgstr ""
-
-#: ../../install2.pm_.c:44
-msgid "Format partitions"
-msgstr ""
-
-#: ../../install2.pm_.c:45
-msgid "Choose packages to install"
-msgstr ""
-
-#: ../../install2.pm_.c:46
-msgid "Install system"
-msgstr ""
-
-#: ../../install2.pm_.c:47 ../../install_steps_interactive.pm_.c:894
-#: ../../install_steps_interactive.pm_.c:895
-msgid "Set root password"
-msgstr ""
-
-#: ../../install2.pm_.c:48
-msgid "Add a user"
-msgstr ""
-
-#: ../../install2.pm_.c:49
-msgid "Configure networking"
-msgstr ""
-
-#: ../../install2.pm_.c:51 ../../install_steps_interactive.pm_.c:818
-msgid "Summary"
-msgstr ""
-
-#: ../../install2.pm_.c:52
-msgid "Configure services"
-msgstr ""
-
-#: ../../install2.pm_.c:54
-msgid "Create a bootdisk"
-msgstr ""
-
-#: ../../install2.pm_.c:56
-msgid "Install bootloader"
-msgstr ""
-
-#: ../../install2.pm_.c:57
-msgid "Configure X"
-msgstr ""
-
-#: ../../install2.pm_.c:58
-msgid "Exit install"
-msgstr ""
-
-#: ../../install_any.pm_.c:402
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:433
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:676
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:680
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:690
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:712
-msgid "Error reading file $f"
-msgstr ""
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:310
-#: ../../interactive.pm_.c:99 ../../interactive.pm_.c:114
-#: ../../interactive.pm_.c:269 ../../interactive_newt.pm_.c:166
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:356
-#: ../../my_gtk.pm_.c:617 ../../my_gtk.pm_.c:640
-msgid "Ok"
-msgstr ""
-
-#: ../../install_gtk.pm_.c:423
-msgid "Please test the mouse"
-msgstr ""
-
-#: ../../install_gtk.pm_.c:424 ../../standalone/mousedrake_.c:132
-msgid "To activate the mouse,"
-msgstr ""
-
-#: ../../install_gtk.pm_.c:425 ../../standalone/mousedrake_.c:133
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:41
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:46 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:47 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:68
-msgid "Use free space"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:70
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:78
-msgid "Use existing partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:80
-msgid "There is no existing partition to use"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:87
-msgid "Use the Windows partition for loopback"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:90
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:92
-msgid "Choose the sizes"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:93
-msgid "Root partition size in MB: "
-msgstr ""
-
-#: ../../install_interactive.pm_.c:94
-msgid "Swap partition size in MB: "
-msgstr ""
-
-#: ../../install_interactive.pm_.c:102
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:105
-msgid "Which partition do you want to resize?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:107
-msgid "Computing Windows filesystem bounds"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:110
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:113
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:114
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-
-#: ../../install_interactive.pm_.c:123
-msgid "Which size do you want to keep for windows on"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:124
-#, c-format
-msgid "partition %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:130
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:145
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:151
-msgid "Erase entire disk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:151
-msgid "Remove Windows(TM)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:154
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:157
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:165
-msgid "Custom disk partitioning"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:169
-msgid "Use fdisk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:172
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:201
-msgid "You don't have enough free space on your Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:217
-msgid "I can't find any room for installing"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:221
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:226
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:232
-msgid "Bringing up the network"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:237
-msgid "Bringing down the network"
-msgstr ""
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-
-#: ../../install_steps.pm_.c:203
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr ""
-
-#: ../../install_steps.pm_.c:385
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-
-#: ../../install_steps.pm_.c:451
-#, c-format
-msgid "Welcome to %s"
-msgstr ""
-
-#: ../../install_steps.pm_.c:634
-msgid "No floppy drive available"
-msgstr ""
-
-#: ../../install_steps_auto_install.pm_.c:51
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:437
-#, c-format
-msgid "Version: %s\n"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:438
-#, c-format
-msgid "Size: %d KB\n"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:337
-#: ../../install_steps_interactive.pm_.c:520
-msgid "Choose the packages you want to install"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:465 ../../install_steps_gtk.pm_.c:340
-msgid "Info"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:345
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:558
-#: ../../install_steps_interactive.pm_.c:675
-msgid "Installing"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:570
-msgid "Time remaining "
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:675
-msgid "Preparing installation"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:618
-#, c-format
-msgid "Installing package %s"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:695
-#: ../../install_steps_gtk.pm_.c:699
-msgid "Go on anyway?"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:695
-msgid "There was an error ordering packages:"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:142
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Linux-Mandrake. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:156
-msgid "Please, choose one of the following classes of installation:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:222
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:224
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:229
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:235
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:237
-msgid "Percentage of packages to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:285 ../../install_steps_interactive.pm_.c:599
-msgid "Package Group Selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:305 ../../install_steps_interactive.pm_.c:614
-msgid "Individual package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:349
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "Expand Tree"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "Collapse Tree"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:418
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "Bad package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:436
-#, c-format
-msgid "Name: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:439
-#, c-format
-msgid "Importance: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:448 ../../install_steps_interactive.pm_.c:578
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:471
-msgid "The following packages are going to be installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "The following packages are going to be removed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:482
-msgid "You can't select/unselect this package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:501
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:507
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:510
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:563
-msgid "Estimating"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:582
-msgid "Please wait, preparing installation"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:613
-#, c-format
-msgid "%d packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:652
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:680 ../../install_steps_interactive.pm_.c:163
-msgid "Accept"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:680 ../../install_steps_interactive.pm_.c:163
-msgid "Refuse"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:681
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:699
-msgid "There was an error installing packages:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:55
-msgid "Please, choose a language to use."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:56
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:68
-#: ../../install_steps_interactive.pm_.c:613
-msgid "All"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:86
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:87
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Linux-"
-"Mandrake distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Linux-Mandrake distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Linux-Mandrake sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:182
-#: ../../install_steps_interactive.pm_.c:822
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:183
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:184
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:201
-msgid "Install Class"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:201
-msgid "Which installation class do you want?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:203
-msgid "Install/Update"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:203
-msgid "Is this an install or an update?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Recommended"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:215
-#: ../../install_steps_interactive.pm_.c:218
-msgid "Expert"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Update"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:238 ../../standalone/mousedrake_.c:41
-msgid "Please, choose the type of your mouse."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:244 ../../standalone/mousedrake_.c:57
-msgid "Mouse Port"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:245 ../../standalone/mousedrake_.c:58
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:253
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:255
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:256
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:275
-msgid "Configuring PCMCIA cards..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:275
-msgid "PCMCIA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:280
-msgid "Configuring IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:280
-msgid "IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:295
-msgid "no available partitions"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:298
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:306
-msgid "Choose the mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:323
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:336
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:361
-msgid "Root Partition"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:362
-msgid "What is the root partition (/) of your system?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:376
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:403
-msgid "Choose the partitions you want to format"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:404
-msgid "Check bad blocks?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Formatting partitions"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:429
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:432
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:438
-msgid "Looking for available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:444
-msgid "Finding packages to upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:461
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:480
-#, c-format
-msgid "Complete (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:480
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:480
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:486
-msgid "Custom"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:585
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:650
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:655
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:684
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:693
-msgid "Post-install configuration"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:718
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid "Choose a mirror from which to get the packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:761
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:764
-msgid "Please choose the packages you want to install."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:776
-msgid "Which is your timezone?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:778
-msgid "Is your hardware clock set to GMT?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:806 ../../printer.pm_.c:22
-#: ../../printerdrake.pm_.c:415
-msgid "Remote CUPS server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:807
-msgid "No printer"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "Mouse"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:823
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:824 ../../printerdrake.pm_.c:344
-msgid "Printer"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:826
-msgid "ISDN card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:829
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:832
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:862
-msgid "Which printing system do you want to use?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:896
-msgid "No password"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:901
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:907
-msgid "Use NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:907
-msgid "yellow pages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:914
-msgid "Authentification NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:915
-msgid "NIS Domain"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:916
-msgid "NIS Server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "First floppy drive"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:968
-msgid "Second floppy drive"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:969
-msgid "Skip"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:974
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:983
-msgid "Sorry, no floppy drive available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:987
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:991
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid "Creating bootdisk"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1001
-msgid "Preparing bootloader"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "Do you want to use aboot?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1013
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1038 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1039 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1040 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1044 ../../standalone/draksec_.c:49
-msgid "Choose security level"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1080
-msgid "Do you want to generate an auto install floppy for linux replication?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1082
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "Creating auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1156
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1167
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Linux-"
-"Mandrake,\n"
-"consult the Errata available from http://www.linux-mandrake.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Linux-Mandrake User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Generate auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1181
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1186
-msgid "Automated"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1186
-msgid "Replay"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1189
-msgid "Save packages selection"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Linux-Mandrake Installation %s"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:33
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-
-#: ../../interactive.pm_.c:65
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:267
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:290
-msgid "Please wait"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr ""
-
-#: ../../keyboard.pm_.c:124 ../../keyboard.pm_.c:155
-msgid "Czech (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:125 ../../keyboard.pm_.c:138 ../../keyboard.pm_.c:158
-msgid "German"
-msgstr ""
-
-#: ../../keyboard.pm_.c:126
-msgid "Dvorak"
-msgstr ""
-
-#: ../../keyboard.pm_.c:127 ../../keyboard.pm_.c:164
-msgid "Spanish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:128 ../../keyboard.pm_.c:165
-msgid "Finnish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:129 ../../keyboard.pm_.c:139 ../../keyboard.pm_.c:166
-msgid "French"
-msgstr ""
-
-#: ../../keyboard.pm_.c:130 ../../keyboard.pm_.c:187
-msgid "Norwegian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:131
-msgid "Polish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:132 ../../keyboard.pm_.c:192
-msgid "Russian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:133 ../../keyboard.pm_.c:203
-msgid "UK keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:134 ../../keyboard.pm_.c:137 ../../keyboard.pm_.c:204
-msgid "US keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:141
-msgid "Armenian (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:142
-msgid "Armenian (typewriter)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:143
-msgid "Armenian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:147
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:148
-msgid "Azerbaidjani (cyrillic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:149
-msgid "Belgian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:150
-msgid "Bulgarian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:151
-msgid "Brazilian (ABNT-2)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:152
-msgid "Belarusian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:153
-msgid "Swiss (German layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:154
-msgid "Swiss (French layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:156
-msgid "Czech (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:157
-msgid "Czech (Programmers)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:159
-msgid "German (no dead keys)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:160
-msgid "Danish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:161
-msgid "Dvorak (US)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:162
-msgid "Dvorak (Norwegian)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:163
-msgid "Estonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:167
-msgid "Georgian (\"Russian\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:168
-msgid "Georgian (\"Latin\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:169
-msgid "Greek"
-msgstr ""
-
-#: ../../keyboard.pm_.c:170
-msgid "Hungarian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:171
-msgid "Croatian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:172
-msgid "Israeli"
-msgstr ""
-
-#: ../../keyboard.pm_.c:173
-msgid "Israeli (Phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174
-msgid "Iranian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:175
-msgid "Icelandic"
-msgstr ""
-
-#: ../../keyboard.pm_.c:176
-msgid "Italian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:177
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:178
-msgid "Korean keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:179
-msgid "Latin American"
-msgstr ""
-
-#: ../../keyboard.pm_.c:180
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:181
-msgid "Dutch"
-msgstr ""
-
-#: ../../keyboard.pm_.c:182
-msgid "Lithuanian AZERTY (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:184
-msgid "Lithuanian AZERTY (new)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:185
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:186
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:188
-msgid "Polish (qwerty layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:189
-msgid "Polish (qwertz layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:190
-msgid "Portuguese"
-msgstr ""
-
-#: ../../keyboard.pm_.c:191
-msgid "Canadian (Quebec)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:193
-msgid "Russian (Yawerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:194
-msgid "Swedish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:195
-msgid "Slovenian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:196
-msgid "Slovakian (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:197
-msgid "Slovakian (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198
-msgid "Slovakian (Programmers)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:199
-msgid "Thai keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:200
-msgid "Turkish (traditional \"F\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:201
-msgid "Turkish (modern \"Q\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:202
-msgid "Ukrainian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:205
-msgid "US keyboard (international)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:206
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:207
-msgid "Yugoslavian (latin/cyrillic)"
-msgstr ""
-
-#: ../../lvm.pm_.c:70
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr ""
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr ""
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr ""
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr ""
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr ""
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr ""
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr ""
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr ""
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr ""
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr ""
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr ""
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr ""
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:356
-msgid "Finish"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:356
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:357
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:617
-msgid "Is this correct?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:143
-msgid "Internet configuration"
-msgstr ""
-
-#: ../../netconnect.pm_.c:144
-msgid "Do you want to try to connect to the Internet now?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:148
-msgid "Testing your connection..."
-msgstr ""
-
-#: ../../netconnect.pm_.c:154 ../../standalone/draknet_.c:196
-msgid "The system is now connected to Internet."
-msgstr ""
-
-#: ../../netconnect.pm_.c:155
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../netconnect.pm_.c:156 ../../standalone/draknet_.c:196
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-
-#: ../../netconnect.pm_.c:161 ../../netconnect.pm_.c:904
-#: ../../netconnect.pm_.c:934 ../../netconnect.pm_.c:1012
-msgid "Network Configuration"
-msgstr ""
-
-#: ../../netconnect.pm_.c:222 ../../netconnect.pm_.c:266
-#: ../../netconnect.pm_.c:276 ../../netconnect.pm_.c:283
-#: ../../netconnect.pm_.c:293
-msgid "ISDN Configuration"
-msgstr ""
-
-#: ../../netconnect.pm_.c:222
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../netconnect.pm_.c:236
-msgid "Connection Configuration"
-msgstr ""
-
-#: ../../netconnect.pm_.c:237
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../netconnect.pm_.c:239 ../../standalone/draknet_.c:552
-msgid "Card IRQ"
-msgstr ""
-
-#: ../../netconnect.pm_.c:240 ../../standalone/draknet_.c:553
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:241 ../../standalone/draknet_.c:554
-msgid "Card IO"
-msgstr ""
-
-#: ../../netconnect.pm_.c:242 ../../standalone/draknet_.c:555
-msgid "Card IO_0"
-msgstr ""
-
-#: ../../netconnect.pm_.c:243 ../../standalone/draknet_.c:556
-msgid "Card IO_1"
-msgstr ""
-
-#: ../../netconnect.pm_.c:244 ../../standalone/draknet_.c:557
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../netconnect.pm_.c:245 ../../standalone/draknet_.c:558
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:246 ../../standalone/draknet_.c:559
-msgid "Provider phone number"
-msgstr ""
-
-#: ../../netconnect.pm_.c:247
-msgid "Provider dns 1"
-msgstr ""
-
-#: ../../netconnect.pm_.c:248
-msgid "Provider dns 2"
-msgstr ""
-
-#: ../../netconnect.pm_.c:249 ../../standalone/draknet_.c:564
-msgid "Dialing mode"
-msgstr ""
-
-#: ../../netconnect.pm_.c:250 ../../standalone/draknet_.c:562
-msgid "Account Login (user name)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:251 ../../standalone/draknet_.c:563
-msgid "Account Password"
-msgstr ""
-
-#: ../../netconnect.pm_.c:261
-msgid "Europe"
-msgstr ""
-
-#: ../../netconnect.pm_.c:261
-msgid "Europe (EDSS1)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:263
-msgid "Rest of the world"
-msgstr ""
-
-#: ../../netconnect.pm_.c:263
-msgid ""
-"Rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:267
-msgid "Which protocol do you want to use ?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:277
-msgid "What kind of card do you have?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:278
-msgid "I don't know"
-msgstr ""
-
-#: ../../netconnect.pm_.c:278
-msgid "ISA / PCMCIA"
-msgstr ""
-
-#: ../../netconnect.pm_.c:278
-msgid "PCI"
-msgstr ""
-
-#: ../../netconnect.pm_.c:284
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:288
-msgid "Abort"
-msgstr ""
-
-#: ../../netconnect.pm_.c:288
-msgid "Continue"
-msgstr ""
-
-#: ../../netconnect.pm_.c:294
-msgid "Which is your ISDN card ?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:314
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../netconnect.pm_.c:323
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../netconnect.pm_.c:371
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../netconnect.pm_.c:375 ../../standalone/drakgw_.c:232
-msgid "Choose the network interface"
-msgstr ""
-
-#: ../../netconnect.pm_.c:376
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-
-#: ../../netconnect.pm_.c:385 ../../netconnect.pm_.c:700
-#: ../../netconnect.pm_.c:845 ../../standalone/drakgw_.c:223
-msgid "Network interface"
-msgstr ""
-
-#: ../../netconnect.pm_.c:386
-msgid ""
-"\n"
-"Do you agree?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:386
-msgid "I'm about to restart the network device:\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:484
-msgid "ADSL configuration"
-msgstr ""
-
-#: ../../netconnect.pm_.c:485
-msgid "Do you want to start your connection at boot?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:620
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-
-#: ../../netconnect.pm_.c:625
-msgid "Dialup options"
-msgstr ""
-
-#: ../../netconnect.pm_.c:626 ../../standalone/draknet_.c:566
-msgid "Connection name"
-msgstr ""
-
-#: ../../netconnect.pm_.c:627 ../../standalone/draknet_.c:567
-msgid "Phone number"
-msgstr ""
-
-#: ../../netconnect.pm_.c:628 ../../standalone/draknet_.c:568
-msgid "Login ID"
-msgstr ""
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Authentication"
-msgstr ""
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "PAP"
-msgstr ""
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Script-based"
-msgstr ""
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Terminal-based"
-msgstr ""
-
-#: ../../netconnect.pm_.c:631 ../../standalone/draknet_.c:571
-msgid "Domain name"
-msgstr ""
-
-#: ../../netconnect.pm_.c:632 ../../standalone/draknet_.c:572
-msgid "First DNS Server (optional)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:633 ../../standalone/draknet_.c:573
-msgid "Second DNS Server (optional)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:701
-msgid ""
-"I'm about to restart the network device $netc->{NET_DEVICE}. Do you agree?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:745
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../netconnect.pm_.c:745 ../../netconnect.pm_.c:748
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-
-#: ../../netconnect.pm_.c:745
-msgid "You are currently connected to internet."
-msgstr ""
-
-#: ../../netconnect.pm_.c:748
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-
-#: ../../netconnect.pm_.c:748
-msgid "You are not currently connected to Internet."
-msgstr ""
-
-#: ../../netconnect.pm_.c:752 ../../standalone/net_monitor_.c:81
-msgid "Connect to Internet"
-msgstr ""
-
-#: ../../netconnect.pm_.c:754
-msgid "Disconnect from Internet"
-msgstr ""
-
-#: ../../netconnect.pm_.c:756
-msgid "Configure network connection (LAN or Internet)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:759
-msgid "Internet connection & configuration"
-msgstr ""
-
-#: ../../netconnect.pm_.c:811 ../../netconnect.pm_.c:961
-#: ../../netconnect.pm_.c:971 ../../netconnect.pm_.c:986
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "ÅÙÏÇÏ XFree"
-
-#: ../../netconnect.pm_.c:812
-msgid "External ISDN modem"
-msgstr ""
-
-#: ../../netconnect.pm_.c:812
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../netconnect.pm_.c:812
-msgid "What kind is your ISDN connection?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:833 ../../netconnect.pm_.c:882
-msgid "Connect to the Internet"
-msgstr ""
-
-#: ../../netconnect.pm_.c:834
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../netconnect.pm_.c:836
-msgid "use dhcp"
-msgstr ""
-
-#: ../../netconnect.pm_.c:836
-msgid "use pppoe"
-msgstr ""
-
-#: ../../netconnect.pm_.c:836
-msgid "use pptp"
-msgstr ""
-
-#: ../../netconnect.pm_.c:846
-#, c-format
-msgid "I'm about to restart the network device %s. Do you agree?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:883
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-
-#: ../../netconnect.pm_.c:900
-msgid "Network configuration"
-msgstr ""
-
-#: ../../netconnect.pm_.c:901
-msgid "Do you want to restart the network"
-msgstr ""
-
-#: ../../netconnect.pm_.c:904
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../netconnect.pm_.c:935
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:962
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:964
-msgid "Choose the profile to configure"
-msgstr ""
-
-#: ../../netconnect.pm_.c:965
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../netconnect.pm_.c:971 ../../printerdrake.pm_.c:19
-msgid "Detecting devices..."
-msgstr ""
-
-#: ../../netconnect.pm_.c:978
-msgid "Normal modem connection"
-msgstr ""
-
-#: ../../netconnect.pm_.c:978
-#, c-format
-msgid "detected on port %s"
-msgstr ""
-
-#: ../../netconnect.pm_.c:979
-msgid "ISDN connection"
-msgstr ""
-
-#: ../../netconnect.pm_.c:979
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../netconnect.pm_.c:980
-msgid "DSL (or ADSL) connection"
-msgstr ""
-
-#: ../../netconnect.pm_.c:980
-#, c-format
-msgid "detected on interface %s"
-msgstr ""
-
-#: ../../netconnect.pm_.c:981
-msgid "Cable connection"
-msgstr ""
-
-#: ../../netconnect.pm_.c:982
-#, fuzzy
-msgid "LAN connection"
-msgstr "ÅÙÏÇÏ XFree"
-
-#: ../../netconnect.pm_.c:982
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../netconnect.pm_.c:987
-msgid "How do you want to connect to the Internet?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:1004
-msgid ""
-"Congratulation, The network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system."
-msgstr ""
-
-#: ../../netconnect.pm_.c:1007
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-
-#: ../../network.pm_.c:253
-msgid "no network card found"
-msgstr ""
-
-#: ../../network.pm_.c:277 ../../network.pm_.c:387
-msgid "Configuring network"
-msgstr ""
-
-#: ../../network.pm_.c:278
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-
-#: ../../network.pm_.c:282 ../../network.pm_.c:392
-msgid "Host name"
-msgstr ""
-
-#: ../../network.pm_.c:319
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network.pm_.c:324
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-
-#: ../../network.pm_.c:333 ../../network.pm_.c:334
-#, c-format
-msgid "Configuring network device %s"
-msgstr ""
-
-#: ../../network.pm_.c:334
-msgid " (driver $module)"
-msgstr ""
-
-#: ../../network.pm_.c:336 ../../standalone/draknet_.c:231
-#: ../../standalone/draknet_.c:427
-msgid "IP address"
-msgstr ""
-
-#: ../../network.pm_.c:337 ../../standalone/draknet_.c:428
-msgid "Netmask"
-msgstr ""
-
-#: ../../network.pm_.c:338
-msgid "(bootp/dhcp)"
-msgstr ""
-
-#: ../../network.pm_.c:338
-msgid "Automatic IP"
-msgstr ""
-
-#: ../../network.pm_.c:359 ../../printerdrake.pm_.c:102
-#: ../../printerdrake.pm_.c:425
-msgid "IP address should be in format 1.2.3.4"
-msgstr ""
-
-#: ../../network.pm_.c:388
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-
-#: ../../network.pm_.c:393
-msgid "DNS server"
-msgstr ""
-
-#: ../../network.pm_.c:394 ../../standalone/draknet_.c:565
-msgid "Gateway"
-msgstr ""
-
-#: ../../network.pm_.c:396
-msgid "Gateway device"
-msgstr ""
-
-#: ../../network.pm_.c:407
-msgid "Proxies configuration"
-msgstr ""
-
-#: ../../network.pm_.c:408
-msgid "HTTP proxy"
-msgstr ""
-
-#: ../../network.pm_.c:409
-msgid "FTP proxy"
-msgstr ""
-
-#: ../../network.pm_.c:412
-msgid "Proxy should be http://..."
-msgstr ""
-
-#: ../../network.pm_.c:413
-msgid "Proxy should be ftp://..."
-msgstr ""
-
-#: ../../partition_table.pm_.c:563
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:581
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-
-#: ../../partition_table.pm_.c:675
-#, c-format
-msgid "Error reading file %s"
-msgstr ""
-
-#: ../../partition_table.pm_.c:682
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr ""
-
-#: ../../partition_table.pm_.c:684
-msgid "Bad backup file"
-msgstr ""
-
-#: ../../partition_table.pm_.c:706
-#, c-format
-msgid "Error writing to file %s"
-msgstr ""
-
-#: ../../partition_table_raw.pm_.c:161
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr ""
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr ""
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr ""
-
-#: ../../printer.pm_.c:20
-msgid "Local printer"
-msgstr ""
-
-#: ../../printer.pm_.c:21
-msgid "Remote printer"
-msgstr ""
-
-#: ../../printer.pm_.c:23
-msgid "Remote lpd server"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "Network printer (socket)"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "SMB/Windows 95/98/NT"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "NetWare"
-msgstr ""
-
-#: ../../printer.pm_.c:27 ../../printerdrake.pm_.c:158
-#: ../../printerdrake.pm_.c:160
-msgid "Printer Device URI"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:19
-msgid "Test ports"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:40
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:52
-msgid "Local Printer Device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:53
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:55
-msgid "Printer Device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:74
-msgid "Remote lpd Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:75
-msgid ""
-"To use a remote lpd print queue, you need to supply\n"
-"the hostname of the printer server and the queue name\n"
-"on that server which jobs should be placed in."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:78
-msgid "Remote hostname"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:79
-msgid "Remote queue"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:88
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:89
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:94
-msgid "SMB server host"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:95
-msgid "SMB server IP"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:96
-msgid "Share name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:99
-msgid "Workgroup"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124
-msgid "NetWare Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:125
-msgid ""
-"To print to a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:129
-msgid "Printer Server"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:130
-msgid "Print Queue Name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:142
-msgid "Socket Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:143
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"hostname of the printer and optionally the port number."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:145
-msgid "Printer Hostname"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:146 ../../printerdrake.pm_.c:422
-msgid "Port"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:159
-msgid "You can specify directly the URI to access the printer with CUPS."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:192 ../../printerdrake.pm_.c:244
-msgid "What type of printer do you have?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:204 ../../printerdrake.pm_.c:305
-msgid "Do you want to test printing?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:207 ../../printerdrake.pm_.c:316
-msgid "Printing test page(s)..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:214 ../../printerdrake.pm_.c:324
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer daemon.\n"
-"This may take a little time before printer start.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-"Does it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:218 ../../printerdrake.pm_.c:328
-msgid ""
-"Test page(s) have been sent to the printer daemon.\n"
-"This may take a little time before printer start.\n"
-"Does it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:234
-msgid "Yes, print ASCII test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:235
-msgid "Yes, print PostScript test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:236
-msgid "Yes, print both test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:243
-msgid "Configure Printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:273
-msgid "Printer options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:274
-msgid "Paper Size"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:275
-msgid "Eject page after job?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:280
-msgid "Uniprint driver options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:281
-msgid "Color depth options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:283
-msgid "Print text as PostScript?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:285
-msgid "Fix stair-stepping text?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:287
-msgid "Number of pages per output pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:288
-msgid "Right/Left margins in points (1/72 of inch)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:289
-msgid "Top/Bottom margins in points (1/72 of inch)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:291
-msgid "Extra GhostScript options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:293
-msgid "Extra Text options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:295
-msgid "Reverse page order"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:345
-msgid "Would you like to configure a printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:351
-msgid ""
-"Here are the following print queues.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:370
-msgid "CUPS starting"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:370
-msgid "Reading CUPS drivers database..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:384 ../../printerdrake.pm_.c:450
-#: ../../printerdrake.pm_.c:471 ../../printerdrake.pm_.c:479
-msgid "Select Printer Connection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:385 ../../printerdrake.pm_.c:472
-msgid "How is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:392
-msgid "Select Remote Printer Connection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"With a remote CUPS server, you do not have to configure\n"
-"any printer here; printers will be automatically detected.\n"
-"In case of doubt, select \"Remote CUPS server\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-"With a remote CUPS server, you do not have to configure\n"
-"any printer here; printers will be automatically detected\n"
-"unless you have a server on a different network; in the\n"
-"latter case, you have to give the CUPS server IP address\n"
-"and optionally the port number."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "ÇäÎÇÏå X"
-
-#: ../../printerdrake.pm_.c:429
-msgid "Port number should be numeric"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:451 ../../printerdrake.pm_.c:480
-msgid "Remove queue"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:454
-msgid ""
-"Name of printer should contains only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:461
-msgid ""
-"Every printer need a name (for example lp).\n"
-"Other parameters such as the description of the printer or its location\n"
-"can be defined. What name should be used for this printer and\n"
-"how is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:465
-msgid "Name of printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:466
-msgid "Description"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:467
-msgid "Location"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-msgid ""
-"Every print queue (which print jobs are directed to) needs a\n"
-"name (often lp) and a spool directory associated with it. What\n"
-"name and directory should be used for this queue and how is the printer "
-"connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:489
-msgid "Name of queue"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:490
-msgid "Spool directory"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:491
-msgid "Printer Connection"
-msgstr ""
-
-#: ../../raid.pm_.c:33
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-
-#: ../../raid.pm_.c:103
-msgid "Can't write file $file"
-msgstr ""
-
-#: ../../raid.pm_.c:128
-msgid "mkraid failed"
-msgstr ""
-
-#: ../../raid.pm_.c:128
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr ""
-
-#: ../../raid.pm_.c:144
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:17
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-
-#: ../../services.pm_.c:18
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: ../../services.pm_.c:20
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:22
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: ../../services.pm_.c:25
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: ../../services.pm_.c:28
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:30
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-
-#: ../../services.pm_.c:32
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: ../../services.pm_.c:36
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:44
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:46
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: ../../services.pm_.c:48
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:52
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:54
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:56
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:61
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:64
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:67
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:70
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-
-#: ../../services.pm_.c:72
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:74
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:79
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:83
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:85
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:86
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:88
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:89
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-
-#: ../../services.pm_.c:118
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:137
-msgid "running"
-msgstr ""
-
-#: ../../services.pm_.c:137
-msgid "stopped"
-msgstr ""
-
-#: ../../services.pm_.c:151
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:156
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:163
-msgid "On boot"
-msgstr ""
-
-#: ../../standalone/diskdrake_.c:67
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:37 ../../standalone/drakgw_.c:180
-msgid "Internet Connection Sharing"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:118
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:119
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:123
-msgid "disable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148
-msgid "reconfigure"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:126
-msgid "Disabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:134
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "ÊÌÑÈÉ ÇäÅÙÏÇÏ"
-
-#: ../../standalone/drakgw_.c:143
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:144
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:148
-msgid "enable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:155
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:160
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "ÊÌÑÈÉ ÇäÅÙÏÇÏ"
-
-#: ../../standalone/drakgw_.c:168
-msgid "Config file content could not be interpreted."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-msgid "Unrecognized config file"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:181
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:207
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:216
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:217
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:224
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:233
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:242
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid "Potential LAN address conflict found in current config of $_!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:261 ../../standalone/drakgw_.c:267
-msgid "Firewalling configuration detected!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:276
-msgid "Configuring..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:307
-msgid "Problems installing package $_"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:590
-msgid "Congratulations!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:591
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:608
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:609
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:610
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "ÊÌÑÈÉ ÇäÅÙÏÇÏ"
-
-#: ../../standalone/drakgw_.c:615
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "ÊÌÑÈÉ ÇäÅÙÏÇÏ"
-
-#: ../../standalone/drakgw_.c:622
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:59
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr ""
-
-#: ../../standalone/draknet_.c:66 ../../standalone/draknet_.c:539
-msgid "Profile: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:74
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:108
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:114
-msgid "Name of the profile to create:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:140
-msgid "Hostname: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:147
-msgid "Internet access"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Type:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:163 ../../standalone/draknet_.c:354
-msgid "Gateway:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:163 ../../standalone/draknet_.c:354
-msgid "Interface:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:168
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:170 ../../standalone/draknet_.c:357
-#: ../../standalone/net_monitor_.c:122 ../../standalone/net_monitor_.c:224
-msgid "Connected"
-msgstr ""
-
-#: ../../standalone/draknet_.c:170 ../../standalone/draknet_.c:357
-#: ../../standalone/net_monitor_.c:83 ../../standalone/net_monitor_.c:122
-#: ../../standalone/net_monitor_.c:224
-#, fuzzy
-msgid "Not connected"
-msgstr "ÅÙÏÇÏ XFree"
-
-#: ../../standalone/draknet_.c:173 ../../standalone/draknet_.c:358
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:173 ../../standalone/draknet_.c:358
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:191
-msgid "Starting your connection..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:199
-msgid "Closing your connection..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:204
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-
-#: ../../standalone/draknet_.c:207
-msgid "The system is now disconnected."
-msgstr ""
-
-#: ../../standalone/draknet_.c:219
-msgid "Configure Internet Access..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:226 ../../standalone/draknet_.c:411
-#, fuzzy
-msgid "LAN configuration"
-msgstr "ÅÙÏÇÏ XFree"
-
-#: ../../standalone/draknet_.c:231
-msgid "Adapter"
-msgstr ""
-
-#: ../../standalone/draknet_.c:231
-msgid "Driver"
-msgstr ""
-
-#: ../../standalone/draknet_.c:231
-msgid "Interface"
-msgstr ""
-
-#: ../../standalone/draknet_.c:231
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:250
-msgid "Configure Local Area Network..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:283
-msgid "Normal Mode"
-msgstr ""
-
-#: ../../standalone/draknet_.c:288
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:307
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "ÊÌÑÈÉ ÇäÅÙÏÇÏ"
-
-#: ../../standalone/draknet_.c:391
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:415
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "ÅÙÏÇÏ XFree"
-
-#: ../../standalone/draknet_.c:423
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:429
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:430
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:466 ../../standalone/draknet_.c:470
-msgid "Disable"
-msgstr ""
-
-#: ../../standalone/draknet_.c:466 ../../standalone/draknet_.c:470
-msgid "Enable"
-msgstr ""
-
-#: ../../standalone/draknet_.c:504
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:528
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "ÊÌÑÈÉ ÇäÅÙÏÇÏ"
-
-#: ../../standalone/draknet_.c:532
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "ÊÌÑÈÉ ÇäÅÙÏÇÏ"
-
-#: ../../standalone/draknet_.c:541
-msgid "Connection type: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:547
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid "Provider dns 1 (optional)"
-msgstr ""
-
-#: ../../standalone/draknet_.c:561
-msgid "Provider dns 2 (optional)"
-msgstr ""
-
-#: ../../standalone/draknet_.c:574
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:575
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr ""
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr ""
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr ""
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-
-#: ../../standalone/draksec_.c:52
-msgid "Setting security level"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:44
-msgid "Control Center"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:45
-msgid "Choose the tool you want to use"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:50
-msgid "no serial_usb found\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:54
-msgid "Emulate third button?"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:131
-msgid "Test the mouse here."
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:40 ../../standalone/net_monitor_.c:52
-#, fuzzy
-msgid "Network Monitoring"
-msgstr "ÇäÔÇÔÉ"
-
-#: ../../standalone/net_monitor_.c:56
-msgid "Statistics"
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:59
-msgid "Sending Speed: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:61
-msgid "Receiving Speed: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:66
-msgid "Close"
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:100 ../../standalone/net_monitor_.c:104
-msgid "Connecting to Internet "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:100 ../../standalone/net_monitor_.c:104
-msgid "Disconnecting from Internet "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:114
-msgid "Disconnection from Internet failed."
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:115
-msgid "Disconnection from Internet complete."
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:117
-msgid "Connection complete."
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:118
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:188
-msgid "sent: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:191
-msgid "received: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:222
-#, fuzzy
-msgid "Connect"
-msgstr "ÅÙÏÇÏ XFree"
-
-#: ../../standalone/net_monitor_.c:222
-#, fuzzy
-msgid "Disconnect"
-msgstr "ÅÙÏÇÏ XFree"
-
-#: ../../standalone/tinyfirewall_.c:29
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "ÅÙÏÇÏ XFree"
-
-#: ../../standalone/tinyfirewall_.c:42
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "ÅÙÏÇÏ XFree"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:10
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Linux Mandrake machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:15
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:22
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:27
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:32
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:37
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:42
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:47
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:52
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:57
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:62
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:67
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:83
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:85
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "ÊÌÑÈÉ ÇäÅÙÏÇÏ"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "ÇäÎÇÏå X"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "ÅÙÏÇÏ XFree"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "ÊÌÑÈÉ ÇäÅÙÏÇÏ"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "çä ÊÑêÏ ÊÌÑÈÉ ÇäÅÙÏÇÏÇÊ¿"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#, fuzzy
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "ÅÙÏÇÏ XFree"
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "ÅÙÏÇÏ XFree"
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "ÅÙÏÇÏ XFree"
-
-#, fuzzy
-#~ msgid "Boot style configuration"
-#~ msgstr "ÊÌÑÈÉ ÇäÅÙÏÇÏ"
-
-#, fuzzy
-#~ msgid "gMonitor"
-#~ msgstr "ÇäÔÇÔÉ"
diff --git a/perl-install/share/po/az.po b/perl-install/share/po/az.po
deleted file mode 100644
index ece4a28e4..000000000
--- a/perl-install/share/po/az.po
+++ /dev/null
@@ -1,10047 +0,0 @@
-# Azerbaijani Turkish translation of DrakX
-# Copyright (C) 1999 MandrakeSof
-# Vasif Ismailoglu MD <azerb_linux@hotmail.com>, 2000
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-06-09 23:30GMT +0200\n"
-"Last-Translator: Vasif İsmayıloğlu MD <azerb_linux@hotmail.com>\n"
-"Language-Team: Azerbaijani Turkish <linuxaz@azerimal.net>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Bütün başlıqları ayrı ayrı quraşdır"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Xinerama ifadələrini işlət"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Təkcə \"%s\" kartını qur (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Çoxlu Başlıq quraşdırılması"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Sizin sisteminiz çoxlu başlıq quraşdırmasını dəstəkləyir.\n"
-"Nə etmək istəyirsiniz?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Ekran kartı"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Ekran kartınızı seçin"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Bir X vericisi seçin"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X verici"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Necə bir XFree qurğusunu istəyirsiniz?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Sizin kartınızın 3D sür'ətləndirmə dəstəyi ola bilər, amma sadecə olaraq "
-"XFree %s\n"
-"ilə düzgün işləyər.\n"
-"Sizin kartınıza XFree %s tərəfindən dəstək verilir ve bu 2D üçün daha yaxşı "
-"bir fikir olar."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Sizin kartınızın XFree %s ilə 3D dəstəyi ola bilər."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "3D avadanlıq sür'ətləndirməsi ilə XFree %s"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Sizin kartınızın XFree %s ilə 3D dəstəyi ola bilər.\n"
-"DİQQ�T! BU SINAQ M�RH�L�SIND�DIR V� KOMPÜTERİNİZ DONDURA BIL�R."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "SINAQ M�RH�L�SİND�Kİ 3D sür'ətləndirmə dəstəkli XFree %s"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Sizin kartınızın 3D sür'ətləndirmə dəstəyi ola bilər, amma sadecə olaraq "
-"XFree %s\n"
-"ilə düzgün işləyər.\n"
-"DİQQ�T! BU SINAQ M�RH�L�SIND�DIR V� KOMPÜTERİNİZ DONDURA BIL�R.\n"
-"Sizin kartınıza XFree %s tərəfindən dəstək verilir ve bu 2D üçün daha yaxşı "
-"bir seçki olar."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree quraşdırılması"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Ekran kartınızın yaddaş böyüklüyünü seçin"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "X verici üçün seçənəkləri göstərin"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Monitorunuzu seçin"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Buradaki iki vacib parametr üfüqi ve şaquli yeniləmə sür'ətləridir.\n"
-"Seçərkən monitorunuzun qabiliyyətinin üstündə bir parametr\n"
-"seçməməyiniz çox vacibdir, əks halda monitor zərər görər.\n"
-"Seçərkən bir qərarsızlığa düşərsəniz, alçaq rezolyusiya seçin."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Üfüqi yeniləmə sür'əti"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Şaquli yeniləmə sür'əti"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Monitor qurulmayıb"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Ekran kartı hələ qurulmayıb"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Rezolyusiya hələ seçilməyib"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Diqqət: Bu qrafika kartı ilə ediləcək sınaq təhlükəlidir"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Qurğuların sınağı"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"bə'zi parametrləri dəyişdirin"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Bir xəta oldu:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d saniyə sonra çıxılacaq"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Bu qurÄŸular doÄŸrudur?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Bir xəta oldu, parametrləri dəyişdirin"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Rezolyusiya"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Rezolyusiya və rəng dərinliyini seçin"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Ekran kartı: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 verici: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Usta Modu"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Hamısını Göstər"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Rezolyusiyalar"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klavatura düzülüşü: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Siçan növü: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Siçan avadanlığı: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitorun Şaquli Daraması: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitorun Üfüqi Yeniləməsi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Ekran kartı: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Ekran kartı: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Ekran kartı yaddaşı: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Rəng dərinliyi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolyusiya: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 verici: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 sürücü: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "X-Window qurğuları hazırlanır"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Nə etmək istəyirsiniz?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Monitoru Dəyişdir"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Ekran kartını dəyişdir"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Verici seçənəklərini dəyişdir"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Rezolyusiyanı Dəyişdir"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Mə'lumatı göstər"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Yenidən sına"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Çıx"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Mövcud qurğuları saxlayım?\n"
-"Hal-hazırkı qurğular:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "\"%s\"a(ə) təkrar girin və dəyişiklikləri fəallaşdırın"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Lütfen çıxın və Ctrl-Alt-BackSpace düymələrinə basın"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X ilə Açılış"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Kompüterinizi avtomatik olaraq X ilə açılması üçün qura bilərəm.\n"
-"Açılışda X Window ilə başlamaq istəyirsiniz?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 rəng (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 min rəng (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 min rəng (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milyon rəng (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milyard rəng (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB və ya daha çox"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standart VGA, 60 Hz-dÉ™ 640x480 "
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 56 Hz-dÉ™ 800x600"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Uyğun, 87 Hz-də titrəşimli 1024x768 (800x600 yox)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 87 Hz-də titrəşimli 1024x768, 56 Hz-də 800x600"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Təkmilləşdirilmiş Super VGA, 60 Hz-də 800x600, 72 Hz-də 640x480"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Titrəşimsiz SVGA, 60 Hz-də 1024x768, 72 Hz-də 800x600"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Yüksək Frekanslı SVGA, 70 Hz-də 1024x768"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Çoxlu Frekansa qadir 60 Hz-də 1280x1024"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Çoxlu Frekansa qadir 74 Hz-də 1280x1024"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Çoxlu Frekansa qadir 76 Hz-də 1280x1024"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "70 Hz dÉ™ 1600x1200 qadir Monitor"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "76 Hz dÉ™ 1600x1200 qadir Monitor"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Açılış qisminin ilk sektoru"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Diskin ilk sektoru (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILO Qurulumu"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Sistem yükləyicisini haraya qurmaq istəyirsiniz?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "LILO/grup Qurulumu"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "Mətn menyulu LILO"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "Qrafiki menyulu LILO"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "DOS/Wİndowsdan açıl (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Sistem yükləyicisi ana seçənəkləri"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "İstifadə ediləcək Açılış idarəcisi"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Açılış yükləyici quruluşu"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Açılış avadanlığı"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (köhnə BIOSlarda işləməz)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Bəsit"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "bəsit"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Ekran modu"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Açılışda gecikmə müddəti"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Parol"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Parol (təkrar)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "�mr sətiri seçənəklərini məhdudlaşdır"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "məhdudlaşdır"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "/tmp-i hər açılışda təmizlə"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ümumi yaddaş miqdarı (%d MB tapıldı)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Birdən artıq profilə icazə ver"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Yaddaş miqdarını Mb cinsindən verin"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"``�mr sətiri seçənəklərini məhdudlaşdır`` seçənəyi parolsuz bir işə yaramaz"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Xahiş edirik təkrar sınayın"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Parollar uyğun gəlmir"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "İnit İsmarıcı"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Firmware Gecikməsini Aç"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Çəkirdək Açılışı Vaxt Dolması"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "CDdən Açılışı Fəallaşdırım?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "OF Açılışı Fəallaşdırım?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "�sas OS"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Buradakı bir birindən fərqli seçənəklərə yenilərini əlavə edə bilər,\n"
-"ya da mövcud olanları dəyişdirə bilərsiniz."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "�lavə et"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Qurtardı"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Təkmilləşdir"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Ne cür bir giriş istəyirsiniz?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linuks"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Digər sistemlər (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Digər sistemlər (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Digər sistemlər (windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "�ks"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Kök"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Sonuna əlavə et"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Oxu-yaz"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Cədvəl"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "E'tibarsız"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Etiket"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "�sas"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd böyüklüyü"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "NoVÄ°deo"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "GiriÅŸi sil"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Boş etiket qəbul edilə bilməz"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Bu etiket istifadə edilməz"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s ara üzü tapıldı"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "BaÅŸqa var?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Heç %s ara üzü var?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Xeyr"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Bəli"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Avadanlıq mə'lumatına bax"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%s kartı (%s) üçün sürücü yüklənir"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hansı %s sürücüsü sınansın?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Bəzi hallarda, %s sürücü düzgün işləməsi üçün əlavə mə'lumat istəyə bilər.\n"
-"Sürücüler üçün əlavə bir xüsusiyyət göstərmək mi istəyərsiniz, yoxsa\n"
-"sürücülərin lazımi mə'lumatlar üçün avadalığı tanımasını mı istəyərsiniz? \n"
-"Bə'zən tanımlama kompüterinizi dondura bilər amma donduğu üçün\n"
-"kompüterinizə heç bir şey olmaz."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Avtomatik yoxla"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Seçənəkləri göstər"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "İndi %s moduluna parametrlər girə bilərsiniz."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"İstəsəniz indi %s modulunun parametrlərini göstərə bilərsiniz.\n"
-"Parametrlər``ad=qiymət ad2=qiymət2...'' şəklində olmalıdır.\n"
-"Məsələn ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Modul seçənəkləri:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"%s modulunun yüklənməsi iflas etdi.\n"
-"Yenidən başqa bir parametr ilə sınamaq istəyirsiniz?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s artıq əlavə edilmişdir)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Zəif parol seçdiniz!"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Xahiş edirik bir istifadəçi adı alın"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"İstifadəçi adında sadacə kiçik hərflər, rəqəmlər, `-' və `_' xarakterləri "
-"ola bilər"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Bu istifadəçi adı artıq vardır"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "İstifadəçini əlavə et"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Bir istifadəçi girin\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "İstifadəçini qəbul et"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Həqiqi adı"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "İstifadəçi adı"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Qabıq"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Timsal"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Avtomatik GiriÅŸ"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Kompüterinizi avtomatik olaraq bir istifadəçi ilə başlada bilərəm.\n"
-"İstəmirsiniz isə rədd edin."
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "�sas istifadəçini seçin:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "İstifadə etmək istədiyiniz pəncərə idarəçisini seçin:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "Qurulumdan sonra istifadə edə biləcəyiniz başqa dillər seçə bilərsiniz"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Hamısı"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"%s emeliyyat sistemi secki proqramina xos gəlmissiniz!\n"
-"\n"
-"Içlerinden birini acmaq ucun adini yazin ve <ENTER>\n"
-"duymesine basin ve ya esas acilis ucun %d saniye gozleyin.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Emeliyyat sistemi secici GRUB'a xos gəlmissiniz!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "%c ve %c duymeleri ile isıqlandırılmıs girisleri sece bilersiniz"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Sistemi secili emeliyyat sistemiyle acmaq ucun entere,"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-"acilisdan evvel emrleri duzeltmək ucun 'e', emr setiri ucun ise 'c' basin"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Isaretli secenek %d saniye icinde sistemi acacaq."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "/boot içində lazımi yer yoxdur"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Masa Üstü"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "BaÅŸlama Menyusu"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Sistem yükləyicisini haraya qurmaq istəyirsiniz?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "hələlik yardım sistemi mövcud deyildir.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Qurulum Tərzi Quraşdırılması"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Fayl"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Fayl/Çı_x"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>x"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Kateqoriyasından Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "�nənəvi Monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "�nənəvi Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Açılışda Auroranı başlat"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modu"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Açılış İdarəçisi olaraq hazırda %s işlədirsiniz.\n"
-"Quraşdırma sehirbazını başlatmaq üçün tıqlayın."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Qur"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Açılış modu"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Sistem modu"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Açılışda X-Window sistemini başlat"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Xeyr, Avtomatik giriş istəmirəm"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"Bəli, bu istifadəçi üçün avtomatik giriş istəyirəm (istifadəçi, masa üstü)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "Oldu"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Ləğv et"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "/etc/inittab oxunmaq üçün açıla bilmir: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "LILO qurulumu iflas etdi. Olan xəta:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr ""
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr ""
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr ""
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr ""
-
-#: ../../common.pm_.c:113
-#, fuzzy, c-format
-msgid "%d seconds"
-msgstr "%d saniyə sonra çıxılacaq"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "�vvəlcə datanızın yedəyini alın"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Diqqətlə Oxuyun!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Aboot istifadə etməyi istəyirsinizsə, boş disk sahəsi (2048 sektor bəsdir.)\n"
-"buraxmayı unutmayın."
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Xəta"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Sehirbaz"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Yeni"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "Uzaqdakı növbə adı"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Bağlama nöqtəsi"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Seçənəklər"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Növ"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Ayır"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "BaÄŸla"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Monitorunuzu seçin"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tək bir böyük disk bölməniz var\n"
-"(əsasən MS DOS/Windows istifadə edər).\n"
-"�vvəlcə bu disk bölməsinin böyüklüyünü dəyişdirməyinizi\n"
-"tövsiyə edirik. �vvəlcə bölmənin üstünə, sonra \"Böyüklüyü\n"
-"Dəyişdir\" düyməsinə tıqlayın"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "�traflı"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "baÄŸlama iflas etdi"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "BoÅŸ"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Digər"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Fayl sistemi növü:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Yarat"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Yerinə ``%s'' işlət"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Sil"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "�vvəlcə ``Ayır'-ı işlət"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölməsinin növünü dəyişdirdikdən sonra, bu bölmədəki bütün mə'lumatlar "
-"silinəcəkdir"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "%s avadanlığını haraya bağlamaq istəyirsiniz?"
-
-#: ../../diskdrake.pm_.c:500
-#, fuzzy
-msgid "Mount options"
-msgstr "Modul seçənəkləri:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:525
-#, fuzzy
-msgid "Removable media"
-msgstr "Taxılıb sökülə bilən avadanlıqların avtomatik bağlanması"
-
-#: ../../diskdrake.pm_.c:532
-#, fuzzy
-msgid "Change type"
-msgstr "Bölmə növünü Dəyişdir"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Hansı dili istəyirsiniz?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Verici"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Monitorunuzu seçin"
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Yeni bölmə yarat"
-
-#: ../../diskdrake_interactive.pm_.c:188
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Usta moduna keç"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Normal moda keç"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Geri al"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Davam edilsin?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Qeyd etmədən Çıx"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Bölmə cədvəlini qeyd etmədən çıxırsınız?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Avtomatik ayır"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Hamısını təmizlə"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Daha Çox"
-
-#: ../../diskdrake_interactive.pm_.c:250
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Sabit disk seçkisi"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Avtomatik yerləşdirmə üçün boş sahə yoxdur"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Bütün birinci bölmələr istifadədədir"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Artıq bölmə əlavə edilə bilməz"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "Artıq bölmə yaratmaq üçün, bir bölməni silib məntiqi bölmə yaradın"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Bölmə cədvəlini yaz"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Bölmə cədvəlini qurtar"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Bölmə cədvəlini qurtar"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Bölmə cədvəlini qurtar"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Taxılıb sökülə bilən avadanlıqların avtomatik bağlanması"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Fayl seç"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Yedək bölmə cədvəli eyni böyüklüyə sahib deyil\n"
-"Davam etmək istəyirsiniz?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Xəbərdarlıq"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Disket sürücüyə bir disket yerləşdirin\n"
-"Bu disketdəki bütün mə'lumatlar yox olacaqdır"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Bölmə cədvəli qurtarılmağa cəhd edilir"
-
-#: ../../diskdrake_interactive.pm_.c:340
-#, fuzzy
-msgid "Detailed information"
-msgstr "Mə'lumatı göstər"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Böyüklüyünü Dəyişdir"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Daşı"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Şəkilləndir"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Fəal"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "RAIDə əlavə et"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "LVMə əlavə et"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "RAIDdən ayır"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "LVMdən ayır"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "RAIDi dəyişdir"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Loopback üçün istifadə et"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Yeni bölmə yarat"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Başlanğıç sektoru: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "MB cinsindən böyüklük: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Fayl sistemi növü: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Bağlama nöqtəsi: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Xüsusiyyətlər: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Loopback faylı şəkilləndirilir: %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Bölmə növünü Dəyişdir"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "%s loopback avadanlığını haraya bağlamaq istəyirsiniz?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Bu disk bölməsi loopback üçün istifadə edildiyindən ötrü bağlanma "
-"nöqtəsindən ayrıla bilinmir.\n"
-"�vvəlcə loopback-ı ləğv edin."
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Fat fayl sistemi ucları hesaplanır"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Böyüklüyü dəyişdirilir"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Hansı bölmə növünü istəyirsiniz?"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Bu bölmədəki bütün mə'lumatlar yedəklənməlidir"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölməsi böyüklüyü dəyişdirildirkdən sonra bu bölmədəki bütün mə'lumatlar "
-"silinəcəkdir"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Yeni böyüklük seçin"
-
-#: ../../diskdrake_interactive.pm_.c:591
-#, fuzzy
-msgid "New size in MB: "
-msgstr "MB cinsindən böyüklük: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Hansı diskə daşımaq istəyirsiniz?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Hansı sektora daşımaq istəyirsiniz?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Daşınır"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Bölmə daşınır..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "�lavə etmək üçün mövcud bir RAID seçin"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "yeni"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "�lavə etmək üçün mövcud bir LVM seçin"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "LVM adı?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Bu disk bölməsi loopback üçün işlədilməz"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Loopback fayl adı: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Həqiqi adı"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Fayl başqa bir loopback tərəfindən istifadədədir, başqa\n"
-"birini seçin"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Fayl onsuz da vardır. İşlədilsin?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "avadanlıq"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "səviyyə"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "parça böyüklüyü"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Diqqətlı olun: bu əməliyyat təhlükəlidir."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Nəcə bölməlandirmə istəyirsən?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Bağışlayın, /boot bölməsini bu sürücüdə yarada bilməyəcəm.\n"
-"Onda ya LILO istifadə edə bilməyəcəksiniz ve /boot bölümünə \n"
-"ehtiyacınız yoxdur və ya LILO istifadəsini sınayarsınız, ancaq LILO işləməyə "
-"bilər."
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Seçdiyiniz bölüm fiziki sahənin üstündə (1024. silindrin xaricində)\n"
-"/boot bölümünüz yoxdur. Lilo açılış idarəcisindən istifadə etmək "
-"istəyirsinizsə, \n"
-"/boot bölməsini əlavə edərkən çox diqqətli olmalısınız."
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Bir proqram tə'minatlı RAID bölməsini kök qovluğu (/) olaraq tə'yin "
-"etdiniz.\n"
-"�gər lilo ya da grub istifadə etmək istəyirsinizsə, bir /boot bölməsi\n"
-"əlavə etməyi unutmayın"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "%s sürücüsünün bölmə cədvəli diskə yazılacaq!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Yeni qurğuların fəallaşmağı üçün sistemi yenidən başlatmalısınız"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölməsi şəkilləndirildikdən sonra bu bölmədəki bütün mə'lumatlar "
-"silinəcəkdir"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Şəkilləndirilir"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Loopback faylı şəkilləndirilir: %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Şəkilləndirilən bölmə: %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid iflas etdi"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Yeni bölmələr üçün boş sahə yoxdur"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Yeni bölmələr üçün boş sahə yoxdur"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Rezolyusiya: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Avadanlıq: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS sürücü hərfi: %s (sadəcə təxmini)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Növ: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Ad: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Başlanğıc: sektor %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Böyüklüyü: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektor"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Silindr %d -dən silindr %d-yə\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Şəkilləndirilmiş\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Şəkilləndirilməmiş\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Bağlı\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback faylı:\n"
-"   %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Ana açılma bölməsi\n"
-"    (MS-DOS açılışı üçün)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Səviyyə %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Parça böyüklüyü %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskləri %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback faylı adı: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Bəlkə də bu bir Sürücü bölməsidir.\n"
-"Onda bunu ele beləcə buraxın.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Bu, ikili açılış üçün xüsusi\n"
-"Bootstrap-dır.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Böyüklük: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometriyası: %s silindr, %s baş, %s sektor\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "MÉ™'lumat: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskləri %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Bölmə cədvəli növü: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "%d data yolunda, %d nö'li\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Seçənəklər: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s şəkilləndirilməsində %s bölmə xətası"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "%s'i necə şəkilləndirəcəyimi bilmirəm (Növ: %s)"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "baÄŸlama iflas etdi"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "baÄŸlama iflas etdi: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "%s ayrılırkən xəta oldu: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "bəsit"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "verici"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "16MB dən kiçik disk bölmələrində JFS istifadə etməlisiniz"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "32MB dən kiçik disk bölmələrində ReiserFS istifadə etməlisiniz"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Bağlama nöqtələri / ilə başlamalıdır"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Onsuz da bağlama nöqtəsi %s olan bir bölmə var\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "%s üçün LVM Məntiqi Cildini istifadə edə bilməzsiniz"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Bu qovluq kök fayl sistemi içərisində olmalıdır"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Bu bağlama nöqtəsi üçün həqiqi bir fayl sisteminə (ext2, reisrfs)\n"
-"ehtiyac vardır.\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Yazmaq üçün açılan %s'də xəta: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Bir xəta oldu. Yeni fayl sisteminin yaradılacağı hökmlü bir sürücü "
-"tapılmadı. Bu problemin qaynağı üçün avadanlığınızı yoxlayın"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Heç disk bölməniz yoxdur!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Yuxarıda sürücünüzdə tapılan Linuks bölmələri sıralanıb\n"
-"Sehirbazın tövsiyələrinə uyun, onlar çox vaxt işə yarayır.\n"
-"�gər bunu istəməsəniz en azından kök bölməsi (\"/\") seçməlisiniz\n"
-"Çox kiçik bölmə seçməyin. yoxsa çox proqram tə'minatı yükləyə bilməzsəniz.\n"
-"�gər verilərinizi başqa bölmədə tutmaq istəyirsinizsə, ondabir de \"/home\" "
-"bölməsi də yaratmalısınız (birdən çox Linuks\n"
-"bölməniz var isə).\n"
-"\n"
-"\n"
-"Xəbəriniz olsun, hər bölmə aşağıdakı kimi sıralanıb: \"Ad\", \"Həcm\".\n"
-"\n"
-"\n"
-"\"Ad\" belə kodlanıb: \"sürücü növü\", \"sürücü mömrəsi\",\n"
-"\"bölmə nömrəsi\" (məsələn \"hda1\").\n"
-"\n"
-"\n"
-"\"Sürücü növü\" əgər sürücünüz IDE sürücüdürsə \"hd\"dirvə SCSI sürücü isə "
-"\"sd\"dir.\n"
-"\n"
-"\n"
-"\"Sürücü nömrəsi\" həmişə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir.IDE "
-"sürücülər üçün:\n"
-"\n"
-"*\"a\" yəni \"birinci IDE idarəcisində ali sürücü\",\n"
-"\n"
-"*\"b\" yəni \"birinci IDE idarəcisində kölə sürücü\",\n"
-"\n"
-"*\"c\" yəni \"ikinci IDE idarəcisində ali sürücü\",\n"
-"\n"
-"*\"d\" yəni \"ikinci IDE idarəcisində kölə sürücü\".\n"
-"\n"
-"\n"
-"SCSI sürücülərində \"a\" nın mənası \"birinci sürücü\",\n"
-"\"b\"nin mənası \"ikinci sürücü\"dür vs..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"İndi, açılışda avtomatik olaraq başlamasını istədiyiniz xidmətləri \n"
-"seçə bilərsiniz. Siçan bir maddənin üzərina gəldiyində o xidmətin rolunu "
-"açıqlayan\n"
-"kiçik bir baloncuq ortaya çıxacaqdır.\n"
-"\n"
-"�gər kompüterinizi bir verici olaraq istifadə edəcəksəniz bu addımda tam bir "
-"diqqət ayırmalısınız:\n"
-"mühtəməldir ki lazımi heç bir xidməti başlatmaq istəməzsiniz."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"Linuks zamanı GMT-yə (Greenwich Mean Time) görə qurğular və olduğunuz \n"
-"yerdəki zamana görə lazımi dəyişiklikləri edər."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-#, fuzzy
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Bu nöqtədə Linuks Mandrakeni sabit diskinizdə haraya quracağınıza\n"
-"qərar verəcəksiniz. �gər diskiniz boş isə və ya bir başqa sistem\n"
-"bütün yeri doldurmuş isə, o zaman diskinizdə Linuks Mandrake üçün\n"
-"yer açmalısınız. Ona görə də diski bölmələndirməlisiniz.\n"
-"Bölmələndirmə əsasən diskinizdə məntiqi sürücülər yaratmaqdan ibarətdir.\n"
-"\n"
-"Ümumiyyətlə bölmələndirmənin təsiri geri dönülməzdir.Ona görə də\n"
-"bu iş çox gərgin və yorucudur. �gər özünüzə inanmırsınız isə bu\n"
-"sehirbaz sizə yardım edər. Başlamadan əvvəl xahiş edirik əl kitabçanıza\n"
-"baxın. Və bu iş üçün bir az vaxt ayırın.\n"
-"\n"
-"\n"
-"Sizə ən az 2 bölmə lazımdır. Biri sistemin özünü köçürməsi üçün\n"
-"Digəri isə uydurma yaddaş (ya da digər adı ilə Swap) üçün.\n"
-"\n"
-"\n"
-"�gər diskiniz onsuz da bölünmüş isə (əvvəlki sistemden ya da\n"
-"başqa bölmələndirmə vasitələri ilə hazırlanmış) quruluşda\n"
-"sadəcə olaraq o yerləri yükləmək üçün seçin.\n"
-"\n"
-"\n"
-"�gər disk bölünməmiş ise, yuxarıdakı sehirbazdan istifadə edə bilərsiniz.\n"
-"Sisteminizin quruluşundan asılı olaraq müxtəlif imkanlarınız var:\n"
-"\n"
-"* Bütün diski sil: Linuks Mandrake qurmaq üçün bütün diskinizin\n"
-" üzərindəki bölmələri silər. Burada diqqətli olun.\n"
-" Sildikləriniz əsla geri gəlməz.\n"
-"\n"
-"\n"
-"* Windows bölməsindəki sahəni istifadə et: Sisteminizdə\n"
-" Microsoft Windows qurulu isə ve bütün diski əhatə edir isə\n"
-" Linuks Mandrake üçün bir yer ayırmalısınız. Bunun üçün\n"
-" ya bütün diski silməlisiniz (\"Bütün diski sil\" bax ya da\n"
-" \" Usta modu\" tövsiyələri) ya da yenidən bölmələndirməlisiniz.Bu iş heç "
-"bir mə'lumat itkisi olmadan da edilə bilər.Bunun başqa adı\n"
-" eyni kompüterdə həm Linuks Mandrake həm də Windows qurulu olmasıdır.\n"
-"\n"
-"\n"
-"t Bu seçkiyə getmədən əvvəl bir şeyi başa düşməlisiniz ki, yenidən "
-"bölmələndirmə ilə sizin Windows bölməsi kiçiləcəkdir.\n"
-" Yə'ni Windows altında daha az disk sahəsinə malik olacaqsınız.\n"
-"\n"
-"\n"
-"* Usta modu: �gər əllə diski bölmək istəsəniz, bu modu seçin. Diqqətli "
-"olun.\n"
-" Bu mod güçlüdür amma bir o qədər də təhlükəlidir. Diskinizdəki bütün "
-"bilgiyi asandlıqla itirə bilərsiniz.\n"
-" Təcrübəsiz isəniz bunu seçməyin."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Yeni yaradılan bütün bölmələr şəkilləndirilməlidir\n"
-"(şəkilləndirmək yəni fayl sistemi yaratmaq - format).\n"
-"\n"
-"\n"
-"Bu arada var olan hazır bölmələri də üstündəkiləri silmək üçünyenidən "
-"şəkilləndirmək istəya\n"
-"bilərsiniz.\n"
-"Bunu istəyirsinizsə bu bölmələri də seçməlisiniz.\n"
-"\n"
-"\n"
-"Bunu ağlınızda tutun ki var olan bütün bölmələri şəkilləndirmək\n"
-"məcburi deyil.\n"
-"İşlətim sistəmini əmələ gətirən bölmələri (yəni\n"
-"\"/\", \"usr\" və ya \"var\"ı yenidən şəkilləndirmək üçün\n"
-"seçə bilərsiniz. Verilər olan \"home\"u məsələ toxunulmadan\n"
-"buraxa bilərsiniz.\n"
-"\n"
-"\n"
-"Diqqətli olun. şəkilləndirdiyiniz bölmələrdəki verilər\n"
-"geri gəlməz.\n"
-"\n"
-"\n"
-"Şəkilləndirməyə hazır isəniz \"Oldu\" düyməsini tıqlayın.\n"
-"\n"
-"\n"
-"Yeni Linuks Mandrake sisteminizi qurmaq üçün başqa bölmə seçmək\n"
-"istəyirsiniz isə \"Ləğv et\" düyməsinə basın."
-
-#: ../../help.pm_.c:376
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Təptəzə Linuks Mandrake sisteminizə qurulacaq. Bu da seçdiyiniz\n"
-"yükləmə böyüklüyünə və sistəminizin qabiliyyətinə görə\n"
-"bir neçə deqiqə alar.\n"
-"\n"
-"\n"
-"Xahiş edirik, səbrli olun."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-#, fuzzy
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Bu nöqtədə siz Linuks Mandrake yükləmək üçün bölmələri seçməlisiniz. �gər "
-"əvvəldən bölmələr var isə (sistemdə əvvəllər qurulu olan GNU/Linuks "
-"bölmələri və ya başqa bölmələndirmə vasitələri ilə hazırladığınız bölmələr), "
-"onları seçin və istifadə edin.\n"
-"Yoxsa onları bildirməlisiniz.\n"
-"\n"
-"\n"
-"Bölmələri yaratmaq üçün əvvəlci diski seçməlisiniz.\n"
-"Diski seçmək üçün birinci IDE sürücüsü üçün \"hda\" nı, ikinciyi seçmək üçün "
-"\"hdb\"ni, birinci SCSİ sürücüsü üçün ise \"sda\" vs tıqlamalısınız.\n"
-"\n"
-"\n"
-"Seçdiyiniz sürücüyə aşağıdakıları etməyə qadirsiniz:\n"
-"\n"
-"  *Hamısını təmizlə: seçili sürücüdə bütün bölmələri silər.\n"
-"\n"
-"\n"
-"  *Avtomatik: Sürücünüzdəki boş sahədə Ext2 və Swapbölmələrini avtomatik\n"
-"yaradar.\n"
-"\n"
-"\n"
-"  *Bölmə cədvəlini qurtar: Zədələnmiş bölmə cədvəlinibərpa edər.  Xahiş "
-"edirik\n"
-" diqqətli olun, çünkü bu da iflas edə bilər.\n"
-"\n"
-"\n"
-"  *Gəri dön: İstəmədiyiniz seçkilərinizdən geri döndərər.\n"
-"\n"
-"\n"
-"  *Yenidən yüklə: Bütün dəyişikliklərinizdən geri dönərbaşdakı bölmə "
-"cədvəlinə gələr.\n"
-"\n"
-"\n"
-"  *Sehirbaz: Bölmələndirməyi bir sehirbaz edər. Təcrübəsizisəniz bunu "
-"seçin.\n"
-"\n"
-"\n"
-" *Floppy-dən bərpa et: Bölmə cədvəlini əvvəllər flopy-yə qeydetdiniz isə, "
-"bölmə cədvəlini bərpa edin.\n"
-"\n"
-"\n"
-"  *Floppy-yə qeyd et: Daha sonradan bərpa etmek üçünbilgiləri floppy-yə qeyd "
-"edin.\n"
-"  Bu seçki şiddətlə tövsiyə edilir.\n"
-"\n"
-"\n"
-"  *Oldu: Bölmələndirmə bitdiyində, bunu seçərəkdəyişikliklərinizi qeyd "
-"edin.\n"
-"\n"
-"\n"
-"Xəbəriniz olsun, istənilən seçkiyə Tab ve Aşağı/Yuxarı oxlarını da işlədərək "
-"klaviaturadan idarə edə bilərsiniz.\n"
-"\n"
-"\n"
-"Bölmə seçildiyi zaman bunları işlədə bilərsiniz:\n"
-"\n"
-"      *Ctrl-c yeni bölmə yaratmaq üçün (boş bölmə seçili olduğu zaman)\n"
-"\n"
-"      *Ctrl-d bölməni ləğv etmək üçün\n"
-"\n"
-"      *Ctrl-m bağlama nöqtəsini göstərmək üçün\n"
-"\n"
-"\n"
-"\n"
-"�gər PPC kompüterdə qurulum aparırsınızsa, ən az 1 MBlıq balaca bir HFC "
-"'bootstrap' bölməsini yaboot açılış yükləyicisi üçün seçmək istəyəcəksiniz.\n"
-"�gər daha çox yeriniz varsa ; məsələn 50 MB, onda bütün kernel və ramdisk "
-"əksini təcili açılış halları üçün saxlaya bilərsiniz."
-
-#: ../../help.pm_.c:460
-#, fuzzy
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Sürücünüzdə bir və ya daha çox Windows bölməsi tapıldı.\n"
-"Xahiş edirik Linuks Mandrakeni qurmaq üçün onlardan birini "
-"yenidənölçüləndirmək üzərə seçin.\n"
-"\n"
-"\n"
-"Xəbəriniz olsun, her bölmə bu cür sıralanıb; \"Linuks adı\",\"Windows\n"
-"adı\"\"Həcm\".\n"
-"\n"
-"\"Linuks adı\" bu cür kodlanıb: \"sürücü növü\", \"sürücü nömrəsi\",\"bölmə "
-"nömrəsi\" (məsələn, \"hda\").\n"
-"\n"
-"\n"
-"\"Sürücü növü\" sürücünüz IDE sürücü isə \"hd\"dirSCSI sürücü isə\n"
-"\"sd\"dir.\n"
-"\n"
-"\n"
-"\"Sürücü nömrəsi\" həmişə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir.IDE "
-"sürücülər üçün:\n"
-"\n"
-"*\"a\" yəni \"birinci IDE idarəcisində ali sürücü\",\n"
-"\n"
-"*\"b\" yəni \"birinci IDE idarəcisində kölə sürücü\",\n"
-"\n"
-"*\"c\" yəni \"ikinci IDE idarəcisində ali sürücü\",\n"
-"\n"
-"*\"d\" yəni \"ikinci IDE idarəcisində kölə sürücü\".\n"
-"\n"
-"\n"
-"SCSI sürücülərində \"a\" nın mənası \"birinci sürücü\",\n"
-"\"b\"nin mənası \"ikinci sürücü\"dür vs..."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Səbrli olun. Bu əməliyyat bir neçə deqiqə sürə bilər."
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Xahiş edirik Linuks Mandrakenin daha əvvəlki buraxılışları qurulu deyilsə və "
-"ya müxtəlif əməliyyat sistemlərindən istifadə etmək istəyirsinizsə \"Yüklə\" "
-"seçin.\n"
-"\n"
-"\n"
-"Xahiş edirik qurulu olan Linuks Mandrakenin əvvəlki buraxılışını güncəlləmək "
-"istəyirsinizsə \"Güncəllə\" seçin.\n"
-"\n"
-"\n"
-"Sizin GNU/Linuks biliyinizdən asılı olaraq yükləmək və ya güncəlləmək üçün "
-"Linuks Mandrakenin aşağıdakı səviyyələrini seçə bilərsiniz:\n"
-"\n"
-"* Tövsiyə edilən: �gər əvvəlcə heç GNU/Linuks ilə tanış olmadınız isə seçin. "
-"Yükləmə çox asand olacaq və çox az sual soruşulacaq.\n"
-"\n"
-"\n"
-"* Xüsusi: �gə əvvəlcə GNU/Linuksa bir az aşina isəniz, seçin. Onda siz "
-"istədiyiniz sistem növünü (Masa üstü, Verici, Təcrübi) seçə biləcəksiniz.\n"
-" �lbətdə sizə \"Tövsiyə edilən\" seçkidən daha çox sual soruşulacaq.\n"
-" Ona görə də GNU/Linuksa bir az aşina olmalısınız.\n"
-"\n"
-"\n"
-"* Usta: �gər yaxşı bir GNU/Linuks biliyinə sahibsəniz, bu sinifi seçin.\n"
-" \"Xüsusi\" sinifindəki kimi işlədəcəyiniz sistemi (Masa üstü, Verici, "
-"Təcrübi)\n"
-" seçə biləcəksiniz. Amma sizi çox çətin suallar gözləyir. Bəzən bu sualların "
-"içindən\n"
-" çıxa bilmək çox zəhmətli olur. Ona görə də nə etdiyinizi bilirsəniz, bu "
-"sinifi seçin."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Xahiş edirik doğru qapını seçin. Məsələn, MS Windowsdakı COM1'in qarşılığı\n"
-"Linuksda ttyS0'dır."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (Linuks Yükləyici) və Grub açılış sistem yükləyiciləridir: sistemi "
-"Linuks\n"
-"ya da kompüterinizdə olan başqa bir əməliyyatiyle aça bilərlər.\n"
-"�sasən bu digər əməliyyat sistemləri doğru bir şəkilde təsbit edilib "
-"açılışa\n"
-"qurula bilərlər. �gər bir problem olarsa, buradan əllə əlavə edilə "
-"bilərlər.\n"
-"Parametrlər mövzusunda diqqətli olun."
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Linuksu açmaq üçün lazımi bilgilərin harada saxlanılacağına qərar verin.\n"
-"\n"
-"Nə etdiyinizi bilmirsinizsə, \"Diskin ilk sektoru (MBR)\" seçin."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX PCI SCSI adapterleri axtarmağa cəhd edəcək. �gə DrakX SCSI\n"
-"taparsa və hansı sürücü işlədiləcəyini bilərsə, her şey öz özünə\n"
-"qurulacaq.\n"
-"\n"
-"\n"
-"�gər sisteminizdə SCSI adapteri yoxsa, DrakXin tanımayacağı bir\n"
-"ISA SCSI vÉ™ ya PCI SCSI adapteri var isÉ™, sizÉ™ sisteminizdÉ™ SCSI\n"
-"adapteri olub olmadığı soruşulacaq.\n"
-"�gər SCSI adapteriniz yox isə, \"Yox\" tıqlayın. �gər \"Var\"ı "
-"tıqlayarsanız.\n"
-"qarşınıza sürücüləin siyahısı çıxacaq, oradan sizə uyanını seçərsiniz.\n"
-"\n"
-"\n"
-"�gər əllə qurmağı səçərsəniz, o zaman DrakX sizə adapterin xüsusiyyətlərini\n"
-"soruşacaq. İmkan verin ki, DrakX sərbəstcə özü xüsusiyyətləri tapsın.\n"
-"Çoxunda bu işə yarayır.\n"
-"\n"
-"\n"
-"�gər istəmirsəniz isə, o zaman adapter üçün xüsusiyyətləri özünüz\n"
-"göstərməlisiniz. Bunun üçün İstifadəçinin �l Kitabçasına\n"
-"(başlıq 3, \"Avadanlığınız üçün kollektiv mə'lumat) bölməsinə\n"
-"baxın. Ya da avadanlığınızın əl kitabçasından və ya\n"
-"veb səhifəsindən (�gər internetə çıxışınız var isə)\n"
-"ya da Microsoft Windowsdan (�gər sisteminizdə qurulu isə)\n"
-"mə'lumat alın."
-
-#: ../../help.pm_.c:720
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Burada yaboot üçün həm başqa əməliyyat sistemləri, həm alternativ "
-"kernellər,\n"
-" ya da təcili yardım açılış əksləri əlavə edə bilərsiniz.\n"
-"\n"
-"\n"
-"Başqa OSlər  üçün girişin mənası ad və kök çığırından ibarətdir.\n"
-"\n"
-"\n"
-"Linuks üçün mühtəməl girişlər bunlar ola bilər: \n"
-"\n"
-"\n"
-"  - Ad: Bu sadəcə olaraq yaboot üçün açılacaq sistemi timsal edən bir "
-"addır.\n"
-"\n"
-"\n"
-"  - �ks: Bu isə açılacaq çəkirdəyin, yə'ni kernelin adıdır.  Çox vaxt bu "
-"vmlinux vÉ™ ya\n"
-"bunun variasiyalarıdır.\n"
-"\n"
-"\n"
-"  - Kök: Linuks qurulumunun kök avadanlığı və ya '/'.\n"
-"\n"
-"\n"
-"  \n"
-"  - �lavə: Apple avadanlıqlarında kernel əlavə seçənəkləri ilə sıxlıqla "
-"başlanğıc\n"
-"video avadanlığı və ya sıx sıx xəta verən 2ci və 3cü siçan düymələri üçün "
-"emulyasiya\n"
-"imkanları tanına bilir.  Məsələn bunlar \n"
-"bir neçə nümunədir:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: Açılış avadanlığından əvvəl bə'zi açılış modullarını seçmək\n"
-"üçün işlədilir, ya da təcili yardım açılışlarında ramdisk əksini yükləmək "
-"imkanı verir.\n"
-"\n"
-"\n"
-"  - Initrd-size: Ana ramdisk böyüklüyü ümumiyyətlə 4096 baytdır.  �gər daha "
-"geniÅŸ ramdisk bildirÉ™\n"
-"bilərsiniz isə bu seçənəyi işlədin.\n"
-"\n"
-"\n"
-"  - Oxuma-yazma: Normalda sistemin 'dirilməsindən' əvvəl bə'zi sınaqların "
-"aparıla bilməsi üçün\n"
-"'root' fayl sistemi bu moda soxulur.  Bu seçənəyi nəzərə almayabilərsiniz.\n"
-"\n"
-"\n"
-"  - NoVideo: Bəlkə Apple video avadanlığı problem çıxarda bilər.Onda bu "
-"seçənəklə\n"
-"sistemi 'novideo' modda təbii framebuffer dəstəyi ilə aça bilərsiniz.\n"
-"\n"
-"\n"
-"  - �sas: Bu seçənəklə Linuks sistemi əsas əməliyyat sistemi halına gətirə "
-"bilərsiniz.\n"
-"Onda ENTER düyməsinə basmaqla Linuks sistemi açılacaqdır.  Bu giriş ayrıca "
-"TAB ilə açılış seçkilərinə baxdığınız vaxt \n"
-"'*' işarətilə işıqlandırılacaqdır."
-
-#: ../../help.pm_.c:765
-#, fuzzy
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot NewWorld MacIntosh avadalığı üçün açılış idarəcisidir. Ayrıca\n"
-"GNU/Linuks, MacOS, və ya MacOSX sistemlərini kompüterinizdə varsa, "
-"açacaqdır.\n"
-"Normalda, bu əməliyyat sistemləri düzgün tapılıb qurula bilirlər\n"
-"�gər belə olmazsa, bu ekrandan əllə lazımi qurğuları girə bilərsiniz.\n"
-"Düzgün parametrləri girib girmədiyinizi yaxşıca bir yoxlayın.\n"
-"\n"
-"\n"
-"Yaboot ana seçənəkləri:\n"
-"\n"
-"\n"
-"  - Başlanğıc İsmarıcı: Açılışdan əvvəl çıxan sadə bir ismarıc.\n"
-"\n"
-"\n"
-"  - Açılış Avadanlığı: GNU/Linuksu hardan başlatmaq istədiyinizi bildirir."
-"Ümumiyyətlə bu mə'lumatı daha əvvəl \"bootstrap\" quraşdırılması "
-"sırasındabildirmiş olacaqsınız.\n"
-"\n"
-"\n"
-"  - Açıq Firmware Gecikməsi: LILOdan fərqli olaraq, yabootda iki dənə "
-"gecikmə vardır\n"
-"Birinci gecikmə saniyələrlə ölçülür və bu arada siz\n"
-"CD, OF açılışı, MacOS və ya Linuks arasında seçki aparmalısınız.\n"
-"\n"
-"\n"
-"  - Kernel Açılış Vaxt Dolması: Bu vaxt dolması LILO açılış gecikməsinə "
-"uyğun gəlir.  Linuksu\n"
-"seçdikdən sonra ana kernel parametri olaraq bu gecikmə 0.1 saniyə olaraq "
-"qurulu olacaqdır.\n"
-"\n"
-"\n"
-"  - CD Açılışı Fəallaşsınmı?: Bu seçənəklə CDdən açılışı timsal edən 'C' "
-"xarakteri ilk açılışda çıxacaqdır.\n"
-"\n"
-"\n"
-"  - OF Açılışı Fəallaşsın?: Bu seçənəklə OFdən (Open Firmware) açılışını "
-"timsal edən 'N' xarakteri\n"
-"ilk açılışda çıxacaqdır.\n"
-"\n"
-"\n"
-"  - Ana OS: OF gecikməsi müddəti dolduğu vaxt hansı OSnin açılacağını "
-"göstərir."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Linuks Mandrakeni yükləmak üçün sürücüyü seçin.\n"
-"Diqqətli olun, sürücüdəki bütün mə'lumatlar silinəcək\n"
-"və geri gəlməyəcək."
-
-#: ../../help.pm_.c:832
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Sürücüdəki bütün bilgiləri və bölmələri silmək üçün\n"
-"\"Oldu\" düyməsinə basın. Diqqətli olun,\"Oldu\" düyməsinə basdıqdan sonra\n"
-"Windows bilgiləri də daxil olmaq üzərəbütün bölmə mə'lumatı geri dönməyəcək "
-"şəkildə silinəcək.\n"
-"\n"
-"\n"
-"Bölmədəki mə'lumatları qoruyaraq \"Ləğv et\" düyməsinə\n"
-"əməliyyatı ləğv edə bilərsiniz."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"bu vericiləri seçdiniz: %s\n"
-"\n"
-"\n"
-"bu vericilər əsasən fəallaşdırılır. Onların heç bir təhlükəsizlik\n"
-"problemləri yoxdur, amma bə'zi xətalar tapıla bilər. Belə olsa, mümükün olan "
-"ən yaxın zamanda güncəlləməlisiniz.\n"
-"\n"
-"\n"
-"Bu vericiləri qurmaq istəyirsiniz?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "NİS domeyni olmadan translasiya işlədilə bilməz"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "%s sürücüsünə FAT şəkilləndirilmiş bir disket taxın"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Bu floppi FAT şəklində deyildir"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Bu saxlanmış paketlər seçkisini işlətmək üçün qurulumu ``linux "
-"defcfg=floppy''ilə başladın."
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "%s faylı oxunurkan xəta oldu"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Oldu"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Sisteminizdaki bə'zi avadanlıqlar işləməsi üçün düzgün sürücülərə ehtiyac "
-"duyar.\n"
-"Bunun haqqında %s də/a lazımi malumatları tapa bilərsiniz"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Bir root disk bölümüna ehtiyacınız var.\n"
-"Bunun üçün istər mövcud bir disk bölümü üzərina tıqlayın, \n"
-"ya da yeni birini başdan yaradın. Sonra \"Bağlama \n"
-"Nöqtəsi\"nə gəlin va burayı '/' olaraq dəyişdirin."
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Bir swap sahəsinə ehtiyacınız var"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Bir swap sahəniz yoxdur\n"
-"Davam edim?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Bir swap sahəsinə ehtiyacınız var"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Boş sahəni istifadə et"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Yeni bölmələr üçün boş sahə yoxdur"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Var olan bölmələri işlədimmi"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Bölmə cədvəli qurtarılmağa çalışılır"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Loopback üçün Windows bölməsini işlət"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Linuks4Win'i qurmaq üçün hansı disk bölməsini istifadə edəcəksiniz?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Böyüklüklərini seçin"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Kök (root) bölməsi böyüklüyü (Mb): "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Swap sahəsi böyüklüyü (Mb): "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Windows bölməsindəki boş sahəni işlət"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Hansı bölmənin böyüklüyünü dəyişdirəcəksiniz?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Fat fayl sistemi ucları hesaplanır"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT tədqiqatçımız sizin bölümləri işlədə bilmir,\n"
-"bu xəta oldu: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Sizin Windows bölümü çox dağınıqdır. Daxiş edirik, əvvəlcə birləşdirin "
-"(defraq)"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"DİQQ�T!\n"
-"\n"
-"DrakX \"Windows\" disk bölmənizin böyüklüyünü dəyişdirəcək. Bu iş \n"
-"tehlükəli ola bilər. Aşina deyil isəniz qurulumdan çıxın və \"Windows\" \n"
-"altında \"Scandisk\" (lazım gələrsə \"defrag\" da) proqramını çalışdırın. "
-"Ardından quruluma \n"
-"davam edin. Verilərinizin yedəyini almağı da unutmayın!"
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Hansı sektora daşımaq istəyirsiniz?"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "bölmə %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT böyüklüyü dəyişdirilməsi bacarılmadı: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr "FAT bölməsi yoxdur ya da loopback üçün lazımi yer buraxılmayıb"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Bütün diski sil"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "\"Windows\"u sil"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Sizin birdən çox diskiniz var, linux qurmaq üçün hansını istifadə "
-"edəcəksiniz?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"%s bölüməsinin böyüklüyü dəyişdirildikdən sonra bu bölmədəki bütün "
-"mə'lumatlar silinəcəkdir"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Hazırkı disk bölmələndirməsi"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Fdisk istifadÉ™ et"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"İndi %s sabit diskinizi bölmələndirə bilərsiniz\n"
-"İşinizi bitirdiyinizdə `w' ilə qeyd etməyi unutmayın"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Heç Windows disk bölməniz yoxdur!"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Artıq bölmə əlavə edilə bilməz"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX bölmə sehirbazı bu yolu tapdı:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Bölmə cədvəli növü: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Şəbəkə fəallaşdırılır"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Şəbəkə dayandırılır"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Bir xəta oldu, fəqət necə düzəldiləcəyini bilmirəm.\n"
-"Davam edin, riski sizÉ™ aitdir!"
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "%s bağlama nöqtəsini çoxalt"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Bəzi paketlər doğru olaraq qurulumu bitirmədi.\n"
-"cdrom sürücünüz ya da cdromunuz düzgün işləmir.\n"
-"�vvəldən Linuks qurulu bir sistemdə \"rpm -qpl Mandrake/RPMS/*.rpm\"'yi\n"
-"istifadə edərək Cd-Rom'u yoxlayın.\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "%s Sisteminə Xoşgəlmişsiniz"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Disket sürücü yoxdur"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Başlanğıc addımı `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Qurmaq istədiyiniz paketləri seçin"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Hamısı: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Buraxılış: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Böyüklüyü: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Qurmaq istədiyiniz paketləri seçin"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "MÉ™'lumat"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Qurulum"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Qurulur"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Xahiş edirik gözləyin, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Qalan müddət"
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Ümumi müddət"
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Qurulum hazırlanır"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "%s paketi qurulur"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Yenə də davam edək?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Paketləri istərkən bir xəta oldu:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "X11 qurğuları üçün mövcud qurğulardan istifadə edək?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Sizin sisteminizin qaynaqları çatışmır. Qurulum ərzində problem yaşaya "
-"bilərsiniz\n"
-"Bu baş verərsə mətn aracılığı ilə qurulumu sınamalısınız. Bunun üçün "
-"dəCDROMdan başlatdığınız zaman,\n"
-" 'F1'ə basın və 'text' yazaraq enter'ə basın."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Qurulum Sinifi"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Xahiş edirik aşağıdakı qurulum siniflərindən birisini seçiniz:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Seçdiyiniz paket qruplarının ümumi böyüklüyü təximən %d MBdır.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Bu böyüklükdən daha azını yükləmək istəsəniz,\n"
-"qurmaq istədiyiniz paket faizini seçin.\n"
-"100%%'i seçərsəniz bütün paketlər qurulacaqdır."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Sabit diskinizdə bu paketlərin sadəcə olaraq %d%%'sini quracaq qədər yer "
-"var.\n"
-"Bundan daha azını qurmaq istəsəniz,\n"
-"daha az bir faiz sadəcə ən vacib paketləri ;\n"
-"%d%% isə qurula biləcək bütün paketləri quracaqdır."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Sonrakı addımda daha geniş bir seçki qabağınıza gələcəkdir."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Qurulacaq paketlərin faizi"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Paket Qrup Seçkisi"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Fərdi paket seçkisi"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ümumi böyüklük: %d / %d Mb"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Xətalı paket"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ad: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "�həmiyyət: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Bu paketi seçə bilməzsiniz, çünki qurmaq üçün yer çatmır."
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Aşağıdakı paketlər qurulacaqdır"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Aşağıdakı paketlər sistemdən silinəcəklər"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Bu paketi seçə bilməzsiniz/sistemdən çıxarda bilməzsınız"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Bu lazımlı bir paketdir, sistemdən çıxardıla bilməz"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Bu paketi sistemdən çıxarda bilməzsınız. Artıq qurulmuşdur."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Bu paket yenilənməlidir\n"
-"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Bu paketi sistemdən çıxarda bilməzsiniz. Yenilənməlidir"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Avtomatik seçili paketləri göstər"
-
-#: ../../install_steps_gtk.pm_.c:460
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "DisketÉ™ qeyd et"
-
-#: ../../install_steps_gtk.pm_.c:461
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Paket seçkilərini saxla"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Minimal install"
-msgstr "Qurulumdan çıx"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Təxmini olaraq hesaplanır"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Xahiş edirik gözləyin, qurulum hazırlanır"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d paket"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a şəbəkə. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Qəbul Et"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Rədd Et"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Cd-Romu dəyişdirin!\n"
-"\n"
-"\"%s\" adlı Cd-Romu sürücünüzə taxın və OLDU'ya basın.\n"
-"�gər Cd-Rom əlinizdə deyilsə bu Cd-Rom'dan qurmamaq üçün İMTİNA ET'ə basın."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Paketlər qurulurkən bir xəta oldu:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Bir xəta oldu"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Lisenziya sözləşməsi"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Linuks-"
-"Mandrake distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Linuks-Mandrake distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Linuks-Mandrake sites  which are prohibited or restricted in "
-"some countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Linuks-Mandrake\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klaviatura"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Klaviatura quruluşunu seçiniz."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Bütün mövcud klaviaturaların siyahısı"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Hansı qurulum sinifini istəyirsiniz?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Qurulum/Güncəlləmə"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Bu bir qurulum mu, yoxsa güncəlləməmidir?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Tövsiyə edilən"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Usta"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Güncəlləmə"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Xahiş edirik siçanınızın növünü seçin."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Siçan Qapısı"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Siçanınızın bağlı olduğu serial Qapıyı seçin."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Düymə emulyasiyası"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Düymə 2 emulyasiyası"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Düymə 3 emulyasiyası"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA kartlar qurulur..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "IDE qapıları qurulur"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "uyğun bölmə tapılmadı"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Bağlama nöqtələri üçün bölmələr daranır"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Bağlama nöqtələrini seçin"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Bölmə cədvəlinizi oxuya bilmirəm, dəyəsən biraz xarab olub:-(\n"
-"Xarab olmuş bolmələri düzəltməyə çalışacam.\n"
-"Amma bütün mə'lumatlar itəcəkdir.\n"
-"Başqa bir yol isə DrakXin bölmə cədvəllərini yoxlamasını "
-"passivləşdirməkdir.\n"
-"(xəta %s)\n"
-"\n"
-"Bütün bölmələri itirmək istəyirsiniz?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake bölmə cədvəlini oxumağı bacara bilmədi.\n"
-"Özünüz davam edə bilərsiniz."
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:349
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Şəkilləndiriləcək disk bölmələrini seçin"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Kök (root) Bölməsi"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Sisteminizin kök (/) bölməsi hansıdır?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Bölmə cəvəlindəki dəyişikliklərin daxil olması üçün kompüterinizi yenidən "
-"başlatmalısınız."
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Şəkilləndiriləcək disk bölmələrini seçin"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Xətalı bloklar sınansınmı?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Bölmələr şəkilləndirilir"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s faylı yaradılır və şəkilləndirilir"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Qurulumu bitirmək üçün lazımi sahə yoxdur, xahiş edirik əlavə edin"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Mövcud olan paketlər axtarılır."
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Güncəllənəcək paketlar tapılır"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Sisteminizdə qurulum ya da güncəlləmə üçün lazımi boş yer yoxdur(%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Hamısı (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "�n az (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Tövsiyə edilən (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Xüsusi"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:525
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Disketdən geri çağır"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Disketdən geri çağır"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Package selection"
-msgstr "Paket Qrup Seçkisi"
-
-#: ../../install_steps_interactive.pm_.c:532
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "%s sürücüsünə bir disket taxın"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "DisketÉ™ qeyd et"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Seçili böyüklük var olandan daha böyükdür"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Aşağıdakı siyahıdakı bütün CD'lərə sahib isəniz, OLDU'ya basın.\n"
-"CD'lərin heç birinə sahib deyilsəniz, İMTİNA ET'ə basın.\n"
-"CD'lərdən bə'ziləi əksik isə, onları seçili vəziyyətdən çıxardıb OLDU'ya "
-"basın."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "\"%s\" adlı Cd-Rom"
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"%s paketi qurulur\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Qurulum sonrası qurğular"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "%s sürücüsünə bir disket taxın"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "%s sürücüsünə boş bir disket yerləşdirin"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"İndi şifrləmə üçün istifadə ediləcək tə'minatı endirə bilərsiniz.\n"
-"DİQQ�T:\n"
-"\n"
-"Bu tə'minata bə'zi fərqli ümumi ehtiyaclardan və müxtəlif\n"
-"mühakəmə haqlarından ötrü, bu tə'minatın son istifadəçisi, qanunların ona "
-"bu\n"
-"tə'minatı internetdən endirmə və saxlama haqqını verdiyindən əmin "
-"olmalıdır.\n"
-"\n"
-"�lavə olaraq, müşdəri va/və ya son istifadəçi xüsusilə, yerləşdiyi mühakəmə "
-"yerinin\n"
-"qanunlarını çeynəmədiyindən əmin olmalıdır. Müşdəri və/və ya son istifadəçi\n"
-"qanunların əmr etdiyi şərtləri pozduğu zaman ciddi cəzalara\n"
-"mə'ruz qalacaqdır.\n"
-"\n"
-"Xüsusi ya da dolaylı zərərlərə (gəlir azalması, işin pozulması, ticari "
-"mÉ™'lumat\n"
-"itkisi və digər maddi itkilər) yol açan heç bir hadisədə nə Mandrakesoft, nə "
-"dÉ™ \n"
-"istehsalatçıları və/va ya qaynaq vericiləri məs'ul tutulmazlar. Bu "
-"tə'minatı\n"
-"internetden endirirkən son istifadəçi bu sözləşməyi qəbul etdiyini \n"
-"bəyan etmiş sayılır.\n"
-"\n"
-"\n"
-"Bu sözləşməylə əlaqədər hər cür sual üçün xahiş edirik\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA\n"
-"ünvanına yazınız."
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Paketleri almaq üçün bir əks ünvanı seçin"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "�ks ünvanına bağlantı qurulur"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Sisteminiz hansı məqsədlə istifadə ediləcək?"
-
-#: ../../install_steps_interactive.pm_.c:813
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Avadanlıq saatınız GMT-yə göra quruludur mu?"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:821
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS Verici"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Uzaq CUPS vericisi"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Çap Edicisiz"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Mündəricat"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Siçan"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Vaxt Dilimi"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Çap Edici"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDN kartı"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Səs kartı"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV kartı"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-#, fuzzy
-msgid "NIS"
-msgstr "NIS istifadÉ™ et"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-#, fuzzy
-msgid "Local files"
-msgstr "Yerli Çap Edici"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Root parolunu qur"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Parolsuz"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Bu parol çox sadədir (en az %d xarakter boyunda olmalıdır)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Tanıtma"
-
-#: ../../install_steps_interactive.pm_.c:949
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Tanıtma"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:951
-#, fuzzy
-msgid "LDAP Server"
-msgstr "Verici"
-
-#: ../../install_steps_interactive.pm_.c:957
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS sahəsi"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS Verici"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Xüsusi bir açılış disketi, Linuks sisteminizin normal bir sistem yükləyiciyə "
-"lüzüm\n"
-"olmadan açılmasına imkan verər. �gə sisteminizə lilo (ya da grub) "
-"qurmayacaqsanız,\n"
-"ya da başqa bir əməliyyat sistemi liloyu silərsa ya da lilo "
-"avadanlığınızlaişləməzsə\n"
-"bu disket sizə yardımçi olacaqdır. Sonradan Mandrake qurtarma disketi "
-"rəsmini\n"
-"istifadə edərək də bu disket yaradıla bilər.\n"
-"Açılış disketi yaratmaq istəyirsiniz?\n"
-"Açılış disketi yaratmaq istəyirsinizsə, birinci disket sürücüyə disket "
-"yerləşdirin\n"
-"və \"OLDU\" basın."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "İlk disket sürücü"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "İkinci disket sürücü"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Nəzərə Alma"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Xüsusi bir açılış disketi, Linuks sisteminizin normal bir sistem yükləyiciyə "
-"lüzüm\n"
-"olmadan açılmasına imkan verər. �gə sisteminizə lilo (ya da grub) "
-"qurmayacaqsanız,\n"
-"ya da başqa bir əməliyyat sistemi liloyu silərsa ya da lilo "
-"avadanlığınızlaişləməzsə\n"
-"bu disket sizə yardımçi olacaqdır. Sonradan Mandrake qurtarma disketi "
-"rəsmini\n"
-"istifadə edərək də bu disket yaradıla bilər.\n"
-"Açılış disketi yaratmaq istəyirsiniz?\n"
-"Açılış disketi yaratmaq istəyirsinizsə, birinci disket sürücüyədisklet "
-"yerləşdirin\n"
-"və \"OLDU\" basın."
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Bağışlayın, disket sürücü yoxdur"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Açılış disketi yaratmaq üçün istifadə ediləcək disket sürücüyü seçin"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "%s sürücüsünə bir disket taxın"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Açılış disketi yaradılır"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Açılış yükləyici hazırlanır"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "aboot istifadə etmək istəyirsiniz?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"aboot qurulumunda xata, \n"
-"ilk disk bölməsini yox etsə belə yenə də qurulmasını istəyirsiniz?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Sistem yükləyicini qur"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Açılış yükləyicisi qurulumu iflas etdi. Xəta:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Siz Open Fİrmware açılış avadanlığınızı açılış yükləyicisini\n"
-"fəallaşdırmaq üçün dəyişdirməli ola bilərsiniz. �mr-Seçənək-O-F düymələrini\n"
-" yenidən başlarkən basın və bunları girin:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Sonra da bunları yazın: shut-down\n"
-"Bir sonrakı başlanğıcda açılış yükləyicisi sətirini görməlisiniz."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Alçaq"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Orta"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Yüksək"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Təhlükəsizlik səviyyəsini seçin"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "%s sürücüsünə boş bir disket yerləşdirin"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Avtomatik qurulum disketi hazırlanır"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Bə'zi bölmələr bitdi.\n"
-"\n"
-"Həqiqətən də çıxmaq istəyirsiniz?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Təbriklər, quruluş bitdi.\n"
-"Cdrom və disketi çıxartdıqtan sonra Enter'ə basaraq kompüterinizi \n"
-"yenidən başladın. Linuks Mandrake'nin bu buraxılışındakı yamaqlar haqqında \n"
-"mə'lumat almaq üçün http://www.mandrakelinux.com ünvanından Errata'ya "
-"baxın.\n"
-"Sisteminizin qurğuları haqqında daha geniş bilgiyi Linuks Mandrake \n"
-"İstifadəçi Kitabcığında tapa bilərsiniz."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Avtomatik qurulum disketi hazırlanır"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Avtomatik qurulum disketi hazırlanması seçilərsə,\n"
-"bütün sabit disk mə'lumatı daxil ediləcəkdir!!\n"
-"(yə'ni başqa sistemi də qura bilmək üçün).\n"
-"\n"
-"Bu qurulumu takrar etmək istəyə bilərsiniz axı.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Avtomatlaşdırılmış"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Təkrarla"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Paket seçkilərini saxla"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Linuks-Mandrake Qurulumu %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> irəli/geri  |  <Boşluq> işarətlə  |  <F12> sonrakı ekran"
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu əksikdir"
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "Monitorunuzu seçin"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "�traflı"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Xahiş edirik gözləyin"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Ağacı Aç"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Ağacı Qapat"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Otaq və grup sıralaması arasında gəz"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Qarışıqlıq (%s), daha aydın yazın\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Xətalı tərcih, təkrar sınayın\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (əsas %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Seçkiniz? (əsas %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Seçkiniz (əsas %s, yoxsa `none' yazın) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Çex dili (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Almanca"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Ä°spanca"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "FincÉ™"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Fransızca"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norveçcə"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Polyakca"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Rusca"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "İsveçcə"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "İngiliz (UK) klaviaturası"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "Amerikan (US) klaviaturası"
-
-#: ../../keyboard.pm_.c:159
-#, fuzzy
-msgid "Albanian"
-msgstr "Farsca"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Ermenicə (köhnə) "
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Ermenicə (yazı maşını)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "ErmenicÉ™ (fonetik)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azərbaycanca (latın)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belçika dili"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulqarca"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilya dili (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Belarusca"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "İsveçcə (Alman sırası)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "İsveçcə (Fransız sırası)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Çex dili (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Almanca (ölü düymələr olmasın)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Danimarka dili"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norveçcə)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estoniya dili"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gürcü dili (\"Rus\" sırası)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gürcü dili (\"Latın\" sırası)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Yunanca"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Macarca"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Xırvatca"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Ä°srail"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Ä°srail (Fonetik)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Farsca"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Ä°zlandiya dili"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Ä°talyanca"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Yaponca 106 düyməli"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Koreya klaviaturası"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latın Amerika dili"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litvaniya dili AZERTY (köhnə)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litvanya dili AZERTY (yeni)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litvanya dili \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanya dili \"Fonetik\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "Yeri"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Makedoniya dili"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Hollandiya dili"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Polyakca (QWERTY sırası)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Polyakca (QWERTZ sırası)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portuqalca"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Fransızca (Kanada/Quebec)"
-
-#: ../../keyboard.pm_.c:217
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Rusca (Yawerty)"
-
-#: ../../keyboard.pm_.c:218
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Rusca (Yawerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Rusca (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "SlovencÉ™"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakca (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakca (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azərbaycanca (kiril)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Thai klaviatura"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Thai klaviatura"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Türkcə (ənənəvi \"F\" klaviatura)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Türkcə (müasir \"Q\" klaviatura)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukrayna dili"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "Amerikan (US) klaviaturası (beynəlmiləl)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vyetnam dili \"numeric row\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavca (latın/kiril)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Dairəvi bağlama %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Məntiqi ciltləri birinci olaraq sil\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Siçan"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standart"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Sıravi PS2 Çərxli Siçan"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 düymə"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Ãœmumi"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Çərx"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "serial"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Sıravi 2 Düyməli Siçan"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Sıravi 3 Düyməli Siçan"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mouse (serial ya da köhnə C7 növü)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 düyməli"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 düyməli"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "heç biri"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Siçansızs"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Xahiş edirik siçanınızı seçin"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Siçanınızı işə salmaq üçün,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "T�K�Rİ OYNADIN!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Qurtar"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Sonrakı ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- �vvəlki"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "DoÄŸrudur?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Ä°nternetÉ™ baÄŸlan"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"ADSL ilə internetə bağlanmanın ən yaxşı yolu pppoe'dur.\n"
-"Bəzi bağlantılar pptp istifadə edir, çox azı isə dhcp işlədir.\n"
-"Bilmirsiniz isə 'pppop istifadə et'i seçin"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "dhcp istifadÉ™ et"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pppoe istifadÉ™ et"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pptpe istifadÉ™ et"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Hansı dhcp alıcısını istifadə edəcəksiniz?\n"
-"�sası dhcpcd dir"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Sisteminizdə heç bir eternet şəbəkə adapteri tapıla bilmədi.\n"
-"Bu bağlantı şəklini qura bilmərəm."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Şəbəkə ara üzünü seçin"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "İnternetə bağlanmaq üçün şəbəkə adapteri seçin."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "şəbəkə kartı tapılmadı"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Şəbəkə Qurğuları"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Xahiş edirik kompüterinizın adını girin.\n"
-"Məsələn``kompüteradı.sahəadı.com''.\n"
-"�gə şəbəkə keçidi istifadə edirsinizsə bunun da IP nömrəsini girməlisiniz."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Ev sahibi adı"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Şəbəkə Quraşdırılması Sehirbazı"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Xarici ISDN kart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Daxili ISDN kart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "ISDN bağlantınızın növü nədir?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Oddan divar (Firewall) quruluşu tapıldı!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Oddan divar (Firewall) quruluşu tapıldı!"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN quraşdırılması"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"İnternet xidmət vericinizi seçin.\n"
-"Siyahıda deyilsə Siyahıda deyil'i seçin."
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Açılış Protokolu"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Avropa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Bütün dünya"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Bütün dünya \n"
-" D-Channel'lə xaric (kiralıq xətlər)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Hansı protokolu istifadə etmək istəyirsiniz?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Hansı növ kartınız var?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Bilmirəm"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"ISA kartınız var isə sonrakı ekrandakı qiymətlər doğru olmalıdır.\n"
-"\n"
-"PCMCIA kartınız var isə kartınızın irq və ya io'sunu bilməlisiniz.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Dayandır"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Davam et"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Hansısı sizin ISDN kartınızdır?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"ISDN PCI kart tapdım, amma növünü bilmirəm. Xahiş edirik sonrakı ekrandakı "
-"kartlardan birini seçin."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Heç bir ISDN PCI kart tapılmaı. Sonrakı ekrandakılardan seçin."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Çevirməli şəbəkə seçənəkləri"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Bağlantı adı"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Telefon nömrəsi"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Giriş adı"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Skript əsaslı"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Terminal əsaslı"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Sahə(domain) adı"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Birinci DNS Vericisi (arzuya görə)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "İkinci DNS Vericisi (arzuya görə)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraşdıra "
-"bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Bağlantınızı yenidən quraşdıra bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Artıq İnternetə bağlısınız."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"İstəsəniz İnternetə bağlana bilərsiniz ya da yeniden quraşdıra bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Hələ İnternetə bağlı deyilsiniz."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "İnternetə bağlantı"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "İnternetə bağlantını kəs"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Şəbəkə (İnternet/LAN) bağlantınızı quraşdırın"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "İnternet bağlantısı & quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:96
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraşdıra "
-"bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:105
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraşdıra "
-"bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Şəbəkədən quraşdırması apardığınız üçün şəbəkəniz artıq qurulmuş olmalıdır.\n"
-"Şəbəkə/İnternet bağlantınızı yenidən quraşdırmaq üçün Oldu'ya yoxsa Ləğv "
-"et'ə basın.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Şəbəkə Quraşdırma Sehirbazına Xoç Gəldiniz\n"
-"\n"
-"İnternet/Şəbəkə qurğularınızı edəcəyik.\n"
-"Avtomatik təsbit istəmirsiniz isə işarəti qaldırın.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Qurulacaq profili seçin"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Avtomatik təsbit işlət"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Avadanlıqlar tanınır..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Normal modem təsbiti"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "%s qapısında tapıldı"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN Bağlantısı"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "%s tapıldı"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Yerli Şəbəkə quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "%s ara üzündə tapıldı"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Kabel bağlantısı"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Kabel bağlantısı"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "Yerli Şəbəkə quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "eternet kart tapıldı"
-
-#: ../../network/netconnect.pm_.c:190
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "İstifadə edəcəyiniz vasitəni seçin"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:215
-#, fuzzy
-msgid "Internet connection"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Bağlantınızı açılışda başlatmaq istəyirsiniz?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Şəbəkənin yenidən başladılması sırasında xəta oldu: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Təbrik edirik, internet və şəbəkə quraşdırılması qurtardı.\n"
-"\n"
-"Qurğular indi sisteminizə əlavə ediləcək.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Bu edildikdən sonra Xdən çıxmağınızı tövsiyyə edirik, yoxsa\n"
-"verici adı xəsarətləri meydana gələ bilər."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"DİQQ�T: Bu avadanlıq daha əvvəl İntenetə bağlanmaq üçün qurulmuşdur.\n"
-"Avadanlığın qurğularını dəyişdirmaək istəmirsiniz isə,\n"
-"OLDU ya basın.\n"
-"Aşağıdakı girişləri düzəltməniz özünü əvvəlki qurğuların üstünə yazacaqdır."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr "Xahiş edirik bu kompüter üçün IP qurğularını girin"
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "%s şəbəkə avadanlığı qurulur"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (sürücü %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP ünvanı"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Avtomatlaşdırılmış IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ünvanı 1.2.3.4 şəklində olmalıdır"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Xahiş edirik kompüterinizn adını girin.\n"
-"Məsələn``kompüteradı.sahəadı.com''.\n"
-"�gər şəbəkə keçidi istifadə edirsinizsə bunun da IP nömrəsini girməlisiniz."
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS verici"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Keçit"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Keçit avadanlığı"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Vəkil vericilər quraşdırılması"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP vəkil verici"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP vəkil verici"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Vəkil verici http://... şəklində olmalıdır."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Vəkil verici ftp://... olmalıdır."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "İnternete girişi indi sınamaq istəyirsiniz?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Bağlantınız sınanır..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "İnternetə artıq bağlısınız"
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Təhlükəsizlik səbəbi ilə indi bağlantı qopacaqdır."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Sisteminiz İnternetə bağlı deyil.\n"
-"Bağlantını yenidən quraşdırın"
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Bağlantı quraşdırılması"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Xahiş edirik aşağıdakıları doldurun ya da seçin"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "Kart IRQ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Kart mem (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "Kart IO"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "Kart IO_0"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "Kart IO_1"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Sizin şəxsi telefon nömrəniz"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "İnternet xidmət vericinizin adı (məsələn azeronline.com)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "İXM telefon nömrəsi"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "Dns xidmətcisi 1 (arzuya görə)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "Dns xidmətcisi 2 (arzuya görə)"
-
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "Klaviaturanızı seçin"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Yığma modu"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-#, fuzzy
-msgid "Connection speed"
-msgstr "Bağlantı növü:"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Bağlantı növü:"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Hesab Girişi (istifadəçi adı)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Hesap Parolu"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Bu platformda genişlədilmiş bölmələr dəstəklənmir"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Bölmə cədvəlinizdə bir boşluq var, amma o da işlədilə bilməz.\n"
-"Bu boşluğu, birinci bölmənizi en yaxınındakı genişlədilmiş bölməyə "
-"daşıyaraq\n"
-"məsələni həll edə bilərsiniz."
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "%s faylından qurtarılışda xəta: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "%s faylına yazarkən xəta oldu"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Bə'zən sürücünüzdə pis şeylər ola bilər.\n"
-"Datanın bütövlüyü yoxlaması bacarılmadı. \n"
-"Bu o demekdir ki diskə yazılan hər şey təsadüfi olacaqdır"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "alınmalı"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "vacib"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "əla"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "gözəl"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "bəlkə"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Yerli Çap Edici"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Uzaq CUPS vericisi"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Uzaq çap edici vericisi(lpd)"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Şəbəkə Çap Edicisi (soket) "
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Çap Edici Vericisi"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Çap Edici avadanlığı URI"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modul %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Çap Edici Bağlantısı Seçin"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Çap ediciniz nə şəkildə bağlıdır?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"Uzaq CUPS vericiləri üçün heç bir quraşdırmağa lüzüm yoxdur\n"
-"Buradakı hər çap edici avtomatik tapılacaqdır.\n"
-"Olmazsa \"Uzaq CUPS vericisi\" ni seçin."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-#, fuzzy
-msgid "None"
-msgstr "Qurtardı"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "�sas istifadəçini seçin:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Qapat"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ünvanı 1.2.3.4 şəklində olmalıdır"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Qapı nömrəsi rəqəmlə yazılmalıdır"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "Yerli Çap Edici"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "CUPS verici IP"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Qapı"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Qurulum Tərzi Quraşdırılması"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Avadanlıqlar tanınır..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Qapıları sına"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "\"%s\" modelində bir çap edici tapıldı:"
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Yerli Çap Edici Avadanlığı"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Çap ediciniz hansı avadanlığa bağlıdır? \n"
-"(/dev/lp0, LPT1'nin qarşılığıdır)\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Çap Edici Avadanlığı"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Uzaqdakı bir lpd çap edici növbəsini istifadə etmək üçün, \n"
-"çap edicinin bağlı olduğu çap edici vericisinin adını və növbə \n"
-"adınını verməlisiniz."
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "Uzaqdakı ev sahibi adı"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:320
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Uzaqdakı ev sahibi adı"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Uzaqdakı ev sahibi adı"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Çap Edici Seçənəkləri"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Bir SMB çap edicidən yekun almaq üçün, SMB kompüter adı, çap edici "
-"vericisinin\n"
-"IP ünvanı, çap edicinin paylaşdırma adı, işləmə grupu, istifadəçi adı və \n"
-"parol verilməlidir."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "SMB verici adı"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "SMB verici IP"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Paylaşdırma adı"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Ä°ÅŸ qrupu"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "NetWare Çap Edici Qurğuları"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"NetWare çap edicidən yekun almaq üçün, NetWare vericisinin adı və çap "
-"edici \n"
-"növbəsi adı ilə istifadəçi adı va parolu verilməlidir."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Çap Edici Vericisi"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Çap Edici Növbə Adı"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Soket Çap Edici Qurğuları"
-
-#: ../../printerdrake.pm_.c:528
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Soket çap edicidən yekun almaq üçün, çap edicinin ev sahibi  adını ve "
-"mümkünsə, qapısının nömrəsini verməlisiniz."
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "Çap Edici Ev sahibi"
-
-#: ../../printerdrake.pm_.c:537
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Çap Edici Ev sahibi"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Çap Edici avadanlığı URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Çap edici adı"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Ä°zah"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Yeri"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:793
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Çap Edici Bağlantısı"
-
-#: ../../printerdrake.pm_.c:794
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Nə cür bir çap ediciniz var?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Çap edicini sınamaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "Qapıları sına"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-#, fuzzy
-msgid "No test pages"
-msgstr "Bəli, hər iki sınaq səhifəsini də çap et"
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "Çap Edici"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standart"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Sınaq səhifəsi çap edici vasitəsinə göndərildi.\n"
-"Çap edicinin işləməsi üçün bir az vaxt keçər.\n"
-"Çap vəziyyəti:\n"
-"%s\n"
-"\n"
-"Düz mü işləyir?"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Sınaq səhifəsi çap edici vasitəsinə göndərildi.\n"
-"Çap edicinin işləməsi üçün bir az vaxt keçər.\n"
-"Düz mü işləyir?"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Çap Edicisiz"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Şəbəkə dayandırılır"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "Çap edici seçənəkləri"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Çap edici adı təkcə hərf, rəqəm və alt xətt daxil edə bilər"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "Çap Edicisiz"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Bağlantınız başladılır..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Şəbəkəni qur"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor qurulmayıb"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Şəbəkə Qurğuları"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Yüksək"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Şübhəci"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Çap Edici Bağlantısı Seçin"
-
-#: ../../printerdrake.pm_.c:1728
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Çap Edicini Qur"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Çap edici seçənəkləri"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:1845
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Bir çap edici qurmaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Normal Mod"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (�sas)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Uzaq CUPS vericisi"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "Uzaq CUPS vericisi"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-#, fuzzy
-msgid "Add printer"
-msgstr "Çap Edicisiz"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Çap Edici Bağlantısı"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Şəbəkəni yenidən başlatmaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Vəkil vericilər quraşdırılması"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Qapı"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Vəkil verici http://... şəklində olmalıdır."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "Qapı nömrəsi rəqəmlə yazılmalıdır"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Vəkil verici ftp://... olmalıdır."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Avtomatik GiriÅŸ"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Parol"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Parolsuz"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Parollar uyğun gəlmir"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Şəkilləndirilmiş RAID md%d-yə disk bölməsi əlavə edilə bilinmədi"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "%s faylına yazıla bilinmədi"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid iflas etdi"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid iflas etdi (raidtools əksik ola bilər mi?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "%d səviyyə RAID üçün çatmayan sayda disk bölməsi\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ALSA səs sistemini (Advanced Linux Sound Architecture) başlat"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anakron, periodik əmr zamanlayıcısı"
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd batareya vəziyyətini izləmək üçün və syslog aracılığıyla bunun qeydini "
-"tutmaq üçün istifadə edilir.\n"
-"Ayrıca batareya azaldığında sistemi qapatmaq üçün də istifadə edilir."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"at əmri, zamanlanan əmrləri işləmələri lazım gələn vaxtda işlədir.\n"
-"Sistem yükü lazımi qədər alçaq olduğunda yığma əmrləri işlədilir."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron, istifadəçilərə xüsusi əmrləri periodik olaraq işə sala bilən\n"
-"standart bir UNIX proqramıdır. vixie cron, standart cron'a əlavə edilmiş bir "
-"çox\n"
-"yeni xüsusiyyət daxildir."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM, Midnight Commander kimi mətn əsaslı tə'minatlara siçan dəstəyi əlavə "
-"edər.\n"
-"Ayrıca konsolda siçanla kəsmə və yapışdırma əməliyyatlarına da imkan verər.\n"
-"Konsolda pop-up menyu dəstəyi verər."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake texniki tə'minat sınağı aparar və onları bir ön quraşdırmadan "
-"keçirər."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache bir World Wide Web vericisidir. HTML faylları və CGI verilməsi üçün "
-"istifadÉ™ edilir."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver daemon (qısaca inetd ) bir çox \n"
-"başqa internet xidmətcisini lazım gəldiyi zaman işa salır. İçində telnet, "
-"ftp, rsh və rlogin kimi proqramın olduğu xidmətləri işə salmaqla məs'uldur.\n"
-"inetd-ni sistemden çıxarmaq, onun məs'ul olduğu bütün xidmətləri\n"
-"rədd etmək mənasını daşıyır."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Linuks 2.2 seriyası çəkirdəklərində firewall\n"
-"qurmaq üçün üçün paket süzülməsini başlat."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Bu paket /etc/sysconfig/keyboard'dakı seçili klaviatura düzülüşünü yüklər.\n"
-"Hansı klaviatura düzülüşü istifadə ediləcəyi kbdconfig ilə seçilir.\n"
-"Bu, mandrake qurulan bir çox kompüterdə fəal buraxılmalıdır."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"/usr/include/linux/{autoconf,version}.h üçün \n"
-"/boot-da avtomatik çəkirdək başlığı yaradılması."
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Texniki avadanlığın açılışda avtomatik təsbiti və qurulması."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf sistem qurğularınızı idarə edən proqramları\n"
-"müxtəlif vəzifələri açılışda icra edər."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd, lpr'nin düzgün olaraq işləməsi üçün lazımi çap edici vasitəsidir.\n"
-"lpd əsasən, çap vəzifələrini idarə edən və onları çap ediciyə göndərən "
-"vericidir."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linuks Virtual Verici, yüksək qabiliyyətli vericilər qurmaq üçün işlədilir."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) verici adlarını IP ünvanlarına çevirən\n"
-"Sahə Adı Vericisidir(DNS)."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Bütün Şəbəkə Fayl Sistemlərini (NFS), SMB (Lan Manager/Windows), və \n"
-"NCP (NetWare) bağlama nöqtələrini bağlar və ayırır."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Açılış sırasında başlamaq üçün qurulmuş bütün şəbəkə axtar üzlərini "
-"fəallaşdırır ya da qapatır."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS TCP/IP şəbəkələrində fayl bölüşülməsi üçün istifadə edilən məşhur bir "
-"protokoldur.\n"
-"Bu xidmət, /etc/exports faylında qurğuları olan NFS vericisinin\n"
-"istifadəsinə imkan verər."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS TCP/IP şəbəkələrində fayl bölüşülməsi üçün istifadə edilən məşhur bir \n"
-"protokoldur. Bu xidmət NFS fayl qıfılı istifadəsinə imkan verər."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Açılışda XFree və konsolda numlock düyməsini\n"
-"avtomatik olaraq aç."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "OKI 4w və uyğun Windows çap edicilərini dəstəklə."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA dəstəyi, laptoplarda eternet və modem kimi avadanlıqların "
-"dəstəklənməsinə imkan verər.\n"
-"Qurulmadığı vaxtda açılışda işləməz, işləməsinə ehtiyac olmayan\n"
-"kompüterlərdə qurulu olması problem yaratmaz."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper, NFS ve NIS kimi protokollar tərəfindən istifadə edilən RPC \n"
-"bağlantılarını təşkilatlandırır. Portmap vericisi RPC mexanizmini işlədən\n"
-"protokollarla xidmət edən kompüterlərdə qurulmalıdır və işlədilməlidir."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Posfix, elektronik məktubların bir kompüterdən digərinə yollayan \n"
-"Elektronik Məktub Yollama Vasitəsidir."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Yüksək keyfiyyət təsadüfi rəqəm istehsal edən sistem entropi hovuzunun \n"
-"saxlanması və yenidən köhnə halına gətirilməsinə imkan verər."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed vasitəsi avtomatik IP router cədvəlinin RIP protokolu tərəfindən\n"
-"yenilənməsinə imkan verər. RIP əsasən kiçik şəbəkələrdə istifadə edilir, "
-"daha böyük\n"
-"şəbəkələrdə daha qarışıq routing protokollarına ehtiyacı vardır."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokolu bir şəbəkədəkı istifadəçilərin o şəbəkədəkı hər hansı bir\n"
-"kompüter haqqındakı qabiliyyət ölçüləri ala bilmələrinə imkan verər."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokolu bir şəbəkədəkı istifadəçilərin o şəbəkədəkı kompüterlərdə\n"
-"işləyən istifadəçiləri görməsinə imkan verər."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokolu, uzaq istifadəçilərin, rwho vasitəsi işlədən bir kompüterdə\n"
-"olan bütün istifadəçiləri görmələrina imkan verər."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Kompüterinizdə səs sistemı başladın"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog, bir çox vasitənin ismarıclarını müxtəlif sistem qeydlərində\n"
-"tutmalarına imkan verər. Syslog'un hər zaman işləməsi\n"
-"yaxşı fikirdir."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "USB avadanlığınız üçün sürücüləri yükləyin."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"X Font Vericisini açılışda işə salar (Bu, XFree icrası üçün məcburidir)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Açılışda avtomatik olaraq başlayacaq xidmətləri seçin"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "Çap Edici"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Ä°nternet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "Sistem modu"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Databeyz"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "avadanlıq"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "işləmir"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "dayandırılıb"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Xidmətlər və vasitələr"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Bu xidmət haqqında təəsüf ki,\n"
-"əlavə mə'lumat yoxdur."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Açılışda"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "%s paketi qurulur"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Bölmə cədvəlini oxuya bilmirəm, dəyəsən biraz xarab olub:-(\n"
-"Xəsərli hissələri düzəltməyə cəhd edəcəm"
-
-#: ../../standalone/drakautoinst_.c:44
-#, fuzzy
-msgid "Error!"
-msgstr "Xəta"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Qurulum sonrası qurğular"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Qurulum Tərzi Quraşdırılması"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Təbriklər!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi fəallaşdırıldı"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"İnternet Bağlantısı Bölüşdürülməsi qurulması artıq bitdi.\n"
-"Və artıq fəallaşdırılmışdır.\n"
-"\n"
-"Nə etmək istəyirsiniz?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "passivləşdir"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "keç"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "yenidən quraşdır"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Vericilər bağlanır..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "İnternet Bağlantısı Bölüşdürülməsi indi bağlandı"
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi passivləşdirildi"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"İnternet Bağlantısı Bölüşdürülməsi qurulması artıq bitdi.\n"
-"Və artıq passivləşdirilmişdir.\n"
-"\n"
-"Nə etmək istəyirsiniz?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "fəallaşdır"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Xidmətlər fəallaşdırılır..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "İnternet Bağlantısı Bölüşdürülməsi indi açıldı"
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Kompüterınızi İnternet bağlantısını bölüşdürmək üçün quraşdırırsınız.\n"
-"Bu seçənəklə yerli şəbəkənizdəki başqa kompüterlər sizin İnternet "
-"bağlantınızdan faydalana biləcəklər.\n"
-"\n"
-"Xəbədarlıq: Yerli Şəbəkə (LAN) qurmaq üçün uyğun Şəbəkə Adapterinə "
-"ehtiyacınız var."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Ara Üz %s (%s modulu işlədilir)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Ara üz %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Siseminizdə şəbəkə adapteri yoxdur!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Sisteminizdə şəbəkə kartı tapıla bilməyib.Avadanlığı quran vasitəni işə "
-"salın."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Şəbəkə ara üzü"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Sistemnizdə bir dənə qurulmuş şəbəkə adapteri var:\n"
-"\n"
-"%s\n"
-"\n"
-"Yerli Şəbəkə adapterinizi qurmaq üzərəyəm?"
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Sizi Yerli Şəbəkəyə bağlayacaq adapteri seçin"
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr "Diqqət, şəbəkə adapteriniz onsuz da qurulub. Yenidən quracam."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "%s quğusunda dəyəsən bir LAN ünvan çaxışması tapıldı!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Oddan divar (Firewall) quruluşu tapıldı!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Diqqət! Var olan Firewall qurğusu tapıldı. Yükləmədən sonra bir az əl "
-"gəzdirə bilərsiniz."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Quraşdırılır..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Skriptlə qurulur, proqram tə'minatı qurulur, xidmətlər başladılır..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "%s paketi qurulurkən xəta oldu"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Hər şey quruldu.\n"
-"İndi isə İnternet bağlantınızı yerli şəbəkədəkı başqa kompüterlər ilə "
-"bölüşdürə bilərsiniz, bunun üçün isə avtomatik şəbəkə quraşdırılması (DHCP) "
-"işlədilir."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Quraşdırma artıq qurtarıbdır, amma fəaliyyəti dayandırılıb."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Quraşdırma artıq qurtarıbdır və fəaliyyətdədir."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "İnternet Bağlantısı Bölüşdürmə Quraşdırması aparılmayıb."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "İnternet bağlantısı bölüşdürülməsi quraşdırılması"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"İnternet Bağlantısı Bölüşdürmə vasitəsinə Xoş Gəldiniz!\n"
-"\n"
-"%s\n"
-"\n"
-"Quraşdırma sehirbazını açmaq üçün Quraşdıra tıqlayın."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Şəbəkə quraşdırılması (%d adapter)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Profili sil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Silinəcək profil:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Yeni profil..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Ev sahibi adı:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "İnternet imkanı"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Növ: "
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Keçit:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Ara üz"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Hal:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Bağlandı"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Bağlı deyil"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "BaÄŸlan..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Bağlantını Kəs..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Bağlantınız başladılır..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Bağlantınız kəsilir..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Bağlantı kəsildi. Buna əllə kökdə\n"
-"/etc/sysconfig/şəbəkə-scripts/net_cnx_down\n"
-"əmrini icra edərək nail ola bilərsiniz."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Sistem indi bağlantısını kəsib."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "İnternet keçişini Qur..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "Yerli Şəbəkə quraşdırılması"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Sürücü"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Ara üz"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "State"
-msgstr "Hal:"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Yerli Şəbəkəni Quraşdır..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "�lavə Et"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Lütdən Gözləyin... Qurğular əlavə edilir"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Qurulu ara üzünüz yoxdure.\n"
-"�vvəlcə onları  'Quraşdır'a basaraq qurun"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "%s Adapteri: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Açılış Protokolu"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Açılışda başladılır"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP alıcısı"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "activate now"
-msgstr "Fəal"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "desactivate now"
-msgstr "Fəal"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Heç İnternet bağlantınız yoxdur.\n"
-"�vvəlcə onları  'Quraşdır'a basaraq qurun"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "İnternet bağlantısı quraşdırılması"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "İnternet Bağlantısı Quraşdırılması"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Bağlantı növü:"
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parametrlər"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Eternet Kartı"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP Alıcısı"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Krakerlərə xoşgəlmişsiniz"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Zəif"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Şübhəci"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Bu səviyyə RAID'i diqqətli istifadənizi tövsiyə edirik. Sisteminiz daha "
-"asand\n"
-"işlədiləcək, ancaq xətalara qarşı da həssaiyyəti də artacaqdır. İnternetə \n"
-"bağlı isəniz bunu tövsiyə etmirik. Parol ilə girilir."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Parollar fəallaşdırıldı, yenə də bir şəbəkə üstündə istifadə edilməməsi "
-"tövsiyə edilir."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Bu təhlükəsizlik səviyyəsi üçün əlavə olaraq artırılmış təhlükəsizlik "
-"xəbərdarlığı və \n"
-"yoxlama var."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"İnternetə bağlı bir kompüter üçün standart və tövsiyə edilən bir "
-"təhlükəsizlik səviyyəsidir."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Bu təhlükəsizlik səviyyəsiylə sistemin bir verici olaraq istifadəsi "
-"mümkündür.  \n"
-"Təhlükəsizlik, birdən çox alıcının bağlanmasına icazə verəcək şəkildə "
-"artırılmışdır. "
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Biz dördüncü səviyyə haqlarını verdik və sistem xarici bağlantılara qarşı "
-"tamamilə qapalıdır.\n"
-"Təhlükəsizlik səviyyəsi indi ən üstdədir."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "Təhlükəsizlik səviyyəsinin quraşdırılması"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "X verici üçün seçənəkləri göstərin"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Təhlükəsizlik səviyyəsinin quraşdırılması"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "İdarə Mərkəzi"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "İstifadə edəcəyiniz vasitəni seçin"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "istifadə qaydası: keyboarddrake [--expert] [klavatura]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Konsolda BackSpace'in Silmə funksyasını görməyini istəyirmisiniz?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Cd-Romu dəyişdir"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Qurma Cd-Romunu sürücünüzə taxın və OLDUya basın.\n"
-"�gər Cd-Rom əlinizdə yox isə, bu Cd-Rom-dan qurmamaq üçün R�DD ETə basın."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Təkmilləşdirmə işi başlaya bilmir !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "serial_USB avadanlığı tapılmadı\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "3 düymə emulasiyası"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Firewall quraşdırılması"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Firewall quraşdırılması"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Firewall qurğularını artıq qurtarmısınız.\n"
-"Qur-a tıqlayaraq firewall qurğuların silin ya da təkmilləşdirin."
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Qur-a tıqlayaraq standart firewall qurğularını aparın."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "İşlətdiyiniz dili seçin"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Quruluş sinifini seçin"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Sabit disk seçkisi"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Siçan qurğuları"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Klaviaturanızı seçin"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Təhlükəsizlik"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Fayl sistemi qurğuları"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Bölmə şəkilləndirilməsi"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Qurulacaq paketləri seçin"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Sistemi qur"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "İstifadəçi əlavə et"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Şəbəkəni qur"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Xidmətləri qur"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Açılış disketi yarat"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Sistem yükləyicini qur"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X qur"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Qurulumdan çıx"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall configurator\n"
-"\n"
-"Bu, Linuks Mandrake sisteminiz üçün şəxsi bir firewall quraşdıracaqdır.\n"
-"Daha güclü və e'tibarlı sistem üçün xahiş edirik xüsusi MandrakeSecurity "
-"Firewall\n"
-"buraxılışını tədqiq edin."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"İndi isə internetə bağlanırkən istifadə etməyi arzuladığınız xidmətləri\n"
-"soruşacağıq. Bu suallara xahiş edirik diqqətlə cavab verin, çünkü "
-"kompüterinizin \n"
-"təhlükəsizliyi çox vacib məsələdir.\n"
-"\n"
-"Xahiş edirik, bu xidmətlərdən istifadə etmədiklərinizə yaxşı qərar verin ki, "
-"firewall\n"
-"onu bağlasın. Sonradan bu qurğuları özünüz proqramı yenidən işə salaraq "
-"dəyişdirə bilərsiniz.!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Sisteminizdə bütün İnternetə göstərmək istədiyiniz veb vericisi "
-"işlədirsiniz? \n"
-"Təkcə bu kompüterin görəcəyi bir veb vericisi olacaqsa burada YOX cavasbı "
-"verə bilərsiniz.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Bu kompüterdə ad vericisi işlədirsiniz? �gər internetə bağlanırkən bir IP "
-"ünvanı və\n"
-"nahiyə mə'lumatı almırsınızsa YOX cavabı verin.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Gələn E'tibarlı Qabıq (ssh) bağlantılarına icazə vermək istəyiriniz? Bu, "
-"bir\n"
-"cür telnet əvəzidir. İndi telnet işlədirsinizsə onda \"ssh\"yə "
-"keçməlisiniz. \n"
-"Telnet kodlama işlətmir, ona görə dəbə'zi həkerlər parolunuzu oğurlaya "
-"bilər. \n"
-"ssh bunlara icazə verməz."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Gələn telnet bağlantılarına icazə verim?\n"
-"Bu çox e'tibarsızdır. Bunu sizə əvvəlki ekranda söylədik. Buna \n"
-"yox cavabı verməyinizi tövsiyyə edirik. Yerinə ssh işlədin.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"İnternetdən yetişilə bilən bir FTP vericisi işlədirsiniz? �gər "
-"işlədirsinizsə,\n"
-"təkcə Anonim köçürmələr üçün olmasını tövsiyyə edərik. FTP ilə göndərilən\n"
-"parollar həkerlər tərəfindən oğurlana bilər. FTP parolları kodlaya bilmir "
-"axı.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Burada məktub vericisi işlədirsiniz? �gər ismarıclarınızı pine\n"
-"mutt və ya başqa mətn əsaslı məktub alıcısından göndərirsinizsə,\n"
-"demək ki, işlədirsiniz.  Yoxsa firewall bunu bağlamalıdır.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Burada POP və ya IMAP vericisi işlədirsiniz? Bu isə\n"
-"kompüterdə veb əsaslı olmayan məktub hesabları qurmaq üçün lazımdır.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Dəyəsən 2.2 çəkirdək işlədirsiniz. �gər kompüterinizin\n"
-"IPsi başqa bir kompüter tərəfindən dinamik olaraq verilirsə,\n"
-"onda buna icazə vermək olar. Beledir?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Kompüterinizin vaxtı başqa bir kompüterlə sinxronlaşdırır?\n"
-"Bu, daha çox orta və geniş Unix/Linuks şirkətləri tərəfindən işlədilir.\n"
-"�gər bir şirkətin bir parçası deyilsinizsə, demək ki, işlətmirsiniz."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Qurulum qurtarıldı. Dəyişiklikləri diskə yazım?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "%s açıla bilmir: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Yazmaq üçün %s açıla bilmir: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Verici, Veb/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Şəbəkə Kompüteri (alıcı)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS vericisi, SMB vericisi, SSH vericisi, Vəkil Verici"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Ä°ÅŸ Yeri"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome iş stansiyası"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Palm Pilot və ya Visorunuz üçün vasitələr"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Masa üstü"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Verici, Firewall/Ruter"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domeyn Ad bə Şəbəkə Mə'lumat Vericisi"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"İdarə proqramları: kəlmə işləyənlər (kword, abiword), hesablayıcılar və pdf "
-"göstəriciləri, vs."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-"Səs ilə əlaqədər vasitələr: mp3 və ya midi çalğıçılar, qarışdırıçılar, vs."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Linuks və pulsuz proqram tə'minatıları Kitablar və Howtoları"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE iş stansiyası"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, vs."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedya - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Məktub, xəbərlər, fayl daşınması, chat vasitələri"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Databeyz"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL vÉ™ ya MySQL databeyz vericisi"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Kompüter qurğularını asandlaşdıran vasitələr"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedya - Səs"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Vasitələr"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Sənədlər"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsol Vasitələri"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix məktub vericisi, Inn xəbər vericisi"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "İnternet stansiyası"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedya stansiyası"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Başqa qrafiki ara üzlər (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "KDE, əsas qrafiki ara üz və yardımçi proqramlar kolleksiyası"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Qrafiki Ara Ãœz"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Təcrübi"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache vÉ™ Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "CD yazmaq və yandırmaq proqramları"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "İş Yeri Stansiyası"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, IceWM, Windows Maker, Enlightement, Fvwm, vs."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Qrafika proqramları, məsələn The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C və C++ inkişaf kitabxanaları, proqramları və daxil ediləcək fayllar"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Şəbəkə Kompüteri vericisi"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Verici, ePoçt/Groupware/Xəbərlər"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Oyun stansiyası"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video çalğıçıları və editorları"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedya - Qrafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Məzəli proqramlar: arkad, lövhə oyunları, strategiya, vs"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Elektronik məktub və xəbər oxuyucusu (pine, mutt, tin..) və Web səyyahları"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arxivləmə, emulyatorlar, izləmə"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Şəxsi Maliyyə"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"İstifadəçi dostu proqram və masa üstü ilə bərabər qrafiki ara üz vasitələri"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "SSH daxil bir çox protokolların alıcıları"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "İnternet keçişı"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Səs və video çalınması/düzəliş proqramları"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Başqa qrafiki ara üzlər"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editorlar, rəflər, fayl vasitələri, terminallar"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Şəxsi maliyyə idarəçiləri, məsələn gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Oyunlar"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Şəxsi Mə'lumat İdarəçisi"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedya - CD Yandırma"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Elmi iş stansiyası"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "/etc/sysconfig/autologin  oxunmaq üçün açıla bilmir: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Şəbəkəni yenidən başlatmaq istəyirsiniz?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Razısınız?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Şəbəkə avadanlığını yenidən başlatmalıyam:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "%s avadanlığını yenidən başladacam. Razısınız?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Başqa bir şəkildə seçilməmiş isə, ümumiyyətlə bu seçki \"/dev/hda\" \n"
-#~ "(Birinci ali IDE disk) ya da \"/dev/sda\" (birinci SCSI disk)\n"
-#~ "olacaqdır."
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Aşağıda yazıçıdakı növbələr verilmişdir.\n"
-#~ "Yenilərini əlavə edə bilər, və ya mövcud olanları dəyişdirə bilərsiniz."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Bağlantı növü:"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "�sas istifadəçini seçin:"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Siçanınızı buradan sınayın."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Qurulma və sistem istifadəsi üçün bir dil seçin."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Davam edə bilmək üçün yuxarıdakı lisenziyanın maddələrini qəbul "
-#~ "etməlisiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "Xahiş edirik, maddələrlə razı isəniz \"Qəbul\" düyməsinə basın.\n"
-#~ "\n"
-#~ "\n"
-#~ "Xahiş edirik, maddələrlə razı deyilsəniz ,\"Rədd\" düyməsinə basın\n"
-#~ "Yükləmə indiki qurğularınız dəyişdirilmədən bitiriləcək."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Yuxarıdakı siyahıdan klaviaturanıza uyöun gələn düzülüşü seçiniz"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "�gər yükləmədən sonra işlətmək üçün fərqli dillər (yükləmənin əvvəlində "
-#~ "seçdiyinizdən) seçmək istəyirsinizsə,\n"
-#~ "xahiş edirik, onları yuxarıdakı siyahıdan seçin.\n"
-#~ "�gər hamısını seçmək istəyirsiniz isə \"Hamısını\" seçin."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Seç:\n"
-#~ "\n"
-#~ "  - Xüsusi: �gər Linuksa aşina isəniz  bu seçənəyə tıqlayın.\n"
-#~ "    Sonra sistemin sinifini seçə biləcəksiniz.\n"
-#~ "     Ayrınrılar üçün aşağıya baxın.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Usta: �gər GNU/Linuks haqqında yaxşı bilik sahibi isəniz bunu seçin.\n"
-#~ "    Daha sonra \"Xüsusi\" seçkisində olduğu kimi sistemin sinifini seçə "
-#~ "biləcəksiniz.\n"
-#~ "    Ancaq artıq dərəcədə xahiş edirik, N� ETDİYİNİZİ BİLMİRS�NİZ BU  "
-#~ "SİNİFİ SEÇM�YİN!."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "İndi isə kompüterinizi necə işlədəcəyinizə qerar verin.Seç:\n"
-#~ "\n"
-#~ "* Masa üstü: kompüterinizi gündəlik işlər (idarə işləri, qrafika vs.)\n"
-#~ " üçün istifadə edəcək isəniz, bunu seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Təcrübi: Kompüterinizi proqram tə'minatı inkişafı üçün işlədəcəksəniz, "
-#~ "sizin üçün ideal seçkidir.\n"
-#~ " O zaman qaynaq kodları yazmaq, şəkilləndirmək və xətadan ayıqlamaq və ya "
-#~ "proqram paketləri hazırlamaq üçün lazımi hər cür proqramın daxil olduğu "
-#~ "bir kolleksiya kompüterinizə qurulacaqdır.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Verici: Kompüterinizə Linuks-Mandrakeni verici olaraq işlətmək üçün "
-#~ "quracaqsanız, bu yaxşı bir seçkidir.\n"
-#~ " Bir fayl vericisi (NFS ya da SMB),çap edici vericisi(Unixin lp protokolu "
-#~ "ya da Windows tərzi SMB çap),\n"
-#~ " tanıdıcı verici (NIS), mə'lumat tabanı vericisi və oxşarı...Onda KDE, "
-#~ "GNOME kimi məzəli şeylərin qurulmağını gözləməyin."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "İndi qurmaq ya da güncəlləmək istədiyiniz paket qruplarını\n"
-#~ "seçə bilərsiniz.\n"
-#~ "\n"
-#~ "Sonra DrakX seçdiklərinizi qurmaq ya da güncəlləmək üçün lazımi \n"
-#~ "boş yerinizin olub olmadığını sınayacaq. �gər yoxsa, sizə bunu \n"
-#~ "söyləyəcək. Nə olursa olsun davam etmək istəsəniz,yükləmə davam edəcək.\n"
-#~ "Amma daha az ehtiyac olan paketlər qurulmayacaq.\n"
-#~ "Siyahının üstündə \"Şəxsi paket seçilməsi\"\n"
-#~ "seçənəyini işarətləsiniz 1000dən artıqpaket arasından seçə bilərsiniz."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "İndi isə siz istədiyiniz paketi qurmaq üçün\n"
-#~ "seçə bilərsiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "Paket pəncərəsi solundakı bucaqdaki seçənəyə tıqlayaraqağacı həm aça\n"
-#~ "həm də sıxışdıra bilərsiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "Paketlərin əlifba sırasına görə düzülməsini istəyirsinizsə\n"
-#~ "\"Otaq və grupu  düz\"\n"
-#~ "düyməsinə basın.\n"
-#~ "\n"
-#~ "\n"
-#~ "Paket ehtiyacları xəbərdarlıqlarını istəmirsəniz \"Avtomatik\n"
-#~ "ehtiyaclar\"ı seçə bilərsiniz.\n"
-#~ "Amma bunu işarətlədiyiniz vaxt unutmayın bir paketin işarətini "
-#~ "qaldırdığınızda\n"
-#~ "ehtiyacı olan digər paketlerin de işarəti səssizcə qalxar."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Yuxarıdakı siyahıdakı bütün CDlərə sahibsəniz, OLDUya tıqlayın.\n"
-#~ "Bu CD'lərin heç birinə sahib deyilsəniz, Ləğv et'i tıqlayın.\n"
-#~ "CD'lərdən bə'ziləri əksiksə, bunları seçili vəziyyətdən çıxarıb OLDUya "
-#~ "tıqlayın."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Kompüterinizi internete və ya yerli networka bağlamaq\n"
-#~ "istəyirsinizsə xahiş edirik doğru xüsusiyəti seçin. Ayrıca DrakXin bunu "
-#~ "tapması üçün avadanlığınızı açın.\n"
-#~ "\n"
-#~ "\n"
-#~ "İnternet və ya yerli networka heç girişiniz yox isə\"Şəbəkə qurğularını "
-#~ "keç\"\n"
-#~ "seçənəyini işarətləyin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Şəbəkə qurğularını sonraya buraxmaq istəyirsinizsəvə ya qurğular bitdiysə "
-#~ "\"Oldu\" seçənəyini işarətləyin."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Modem tapılmadı. Xahiş edirik modemin bağlı olduğu serial qapını seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Xəbəriniz olsun, birinci serial qapı (Windows altında\n"
-#~ "\"COM1\") linux altında\"ttyS0\" deyə adlandırılır."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "İndi isə çevirməli bağlantı xüsusiyyətləri seçə bilərsiniz.\n"
-#~ "�gər bilmirsinizsə və ya ne girəcəyinizə qerar vermədinizsə\n"
-#~ "(Məsələn, İXV (ISP) və DNS nömrələri kimi) bunları\n"
-#~ "daha sonra da internete girərək öyrənə bilərsiniz."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Modeminiz xarici isə modeminizi açın ki DrakX onu avtomatik olaraq tapsın."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Xahiş edirik modeminizi açın ve doğru seçənəyi işarətləyin."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "�gər yuxarıdakılar haqqında mə'lumatınız yox isə və ya ne girəcəyinizə "
-#~ "qərar vermədinizsə\n"
-#~ "(Məsələn, İXV (ISP) və DNS nömrələri kimi)bunları\n"
-#~ "daha sonra da internete girərək öyrənə bilərsiniz."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "İndi isə ev sahibi bilgilərini girin. Ne girəcəyinizə\n"
-#~ "qerar vermədinizsə\n"
-#~ "(Məsələn, İXV (ISP) və DNS nömrələri kimi)bunları\n"
-#~ "daha sonra da internete girərək öyrənə bilərsiniz."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Seç:\n"
-#~ "\n"
-#~ " - IP ünvanı: �gər IP ünvanını bilmirsinizsə, sistem idarəcisinəya da \n"
-#~ "İnternet xidmət vericisinə danışın.\n"
-#~ "\n"
-#~ " - Şəbəkə maskası: Ümumiyyətlə \"255.255.255.0\" yaxşı bir seçkidir. �gər "
-#~ "əmin \n"
-#~ "deyilsəniz, yenə sistem idarəcinizə ya da xidmət vericinizəsoruşun.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Avtomatik IP : �gər networkunuz bootp ya da dhcp protokollarından bir "
-#~ "dənəsini \n"
-#~ "istifadə edirsə bu seçənəyi işarətləyin."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "�gər şəbəkədə NIS işlədilirsə, \"NIS kullan\" seçənəyini işarətləyin. "
-#~ "�gər \n"
-#~ "bilmirsinizsə sistem idarəcinizə soruşun."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr "İndi ev sahibi adını girin. Bilmirsinizsə boş buraxın."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "İndi çevirməli bağlantı seçənəklərini girə bilərsiniz. �gər nə yazılması "
-#~ "lazım olduğunu\n"
-#~ "bilmirsinizsə İnternet xidmət vericinizdən lazımi bilgiləri alın."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr "�gə vəkil (proxy) verici istifadə edacəmsəniz bunları girin."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "�gər İnternet bağlantınız doğru şəkildə qurulmuş isə kriptoqrafik "
-#~ "paketi \n"
-#~ "də qura bilərsiniz. �vvəl bir əks ünvanı seçin və daha sonra qurulacaq \n"
-#~ "paketləri quraşdırın."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "İndi isə yaşadığınız yerə görə zaman zolağını seçin."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Siz indi yerli və ya çevirməli yazıçını qura bilərsiniz\n"
-#~ "(Unix, Netware və ya Microsoft Windows networkundakı)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Yazdırma funksiyası istəyirsinizsə CUPS və LPR arasında seçici\n"
-#~ "davranmalısınız.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS yeni, güclü ve elastik bir Unix yazdırma sistemidir\n"
-#~ "CUPS yəni \"Common Unix Printing System\". Bu da Linuks Mandrake\n"
-#~ "də əsas yazdırma sistemidir.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR Linuks Mandrakenin köhne sistemidir.\n"
-#~ "\n"
-#~ "\n"
-#~ "Printeriniz yox isə  \"Yox\" düyməsinə tıqlayın."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linuks bir çox çap edici növü işlədə bilər. Hər bir növ\n"
-#~ "müxtəlif quruluş istəyər.\n"
-#~ "\n"
-#~ "\n"
-#~ "Çap ediciniz fiziki olaraq kompüterinizə bağlı isə\n"
-#~ "\"Yerli çap edici\"nı seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Unix sisteminə bağlı çap ediciyə uzaqdan bağlanmaq istəyirsinizsə\n"
-#~ "\"Uzaqdan bağlanılan çap edici\".\n"
-#~ "\n"
-#~ "\n"
-#~ " MS Windows kompüterinə (və ya SMB protokolunu\n"
-#~ "işlədən Unix kompüterinə) bağlı bir çap ediciyə çatmaq üçün\n"
-#~ "\"SMB/Windows95/98/NT\" seçənəyini işarətləyin."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Xahiş edirik DrakXin tapa bilməsi üçün yazıçınızı açın.\n"
-#~ "\n"
-#~ "Burada bir neçə mə'lumat verməlisiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Çap Edici adı: yazıçılar üçün \"lp\" işlədilir.\n"
-#~ "Ona görə də yazıçınızın adı \"lp\" olmalıdır.\n"
-#~ "Bir neçə çap ediciniz var isə istədiyiniz adı verə bilərsiniz. Sadəcə "
-#~ "olaraq ə aralarına boru işarəti \"|\" qoymalısınız.\n"
-#~ "Məsələn \"Mənim yazıçım|lp\".\n"
-#~ "Adında \"lp\" olan çap edici baş çap edici olacaqdır.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Təsvir: İstəyə bağlıdır. Amma bir neçə çap ediciniz var isə\n"
-#~ "bir xeyli faydalı ola bilər.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Yerləşmə: Çap Edicinin yeri haqqında istədiyinizi yaza bilərsiniz."
-#~ "Məsələn, \"2ci mərtəbə\".\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Burada bir neçə mə'lumat verməlisiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "*İstək adı:  yazıçılar üçün \"lp\" işlədilir.\n"
-#~ "Ona görə də yazıçınızın adı \"lp\" olmalıdır.\n"
-#~ "Bir neçə çap ediciniz var isə istədiyiniz adı verə bilərsiniz. Sadəcə "
-#~ "əolaraq aralarına boru işarəti \"|\" qoymalısınız.\n"
-#~ "Məsələn \"Mənim yazıçım|lp\".\n"
-#~ "Adında \"lp\" olan çap edici baş çap edici olacaqdır.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Saxlama qovluğu: Çap Edici sifarişlərinizi saxlanıldığı yer.\n"
-#~ "Mövzudan bixəbər isəniz əsas qurğunu seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Çap Edici bağlantısı: Çap Edici fiziki olaraq kompüterə bağlı ise\n"
-#~ "\"Yerli Çap Edici\" seçin.\n"
-#~ "Uzaq bir Unix sistemə bağlı çap edici isə\"Uzaqdan idarəli lpd Çap Edici"
-#~ "\" seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Uzaq SMB vericisi işlədən Unix və ya Windows sisteminə bağlıyazıçı üçün "
-#~ "isə \"SMB/Windows 95/98/NT\" seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "NetWare şəbəkədə yerləşən çap edici üçün isə\"NetWare\" seçin.\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Sizin çap edici tapılmadı. Xahiş edirik bağlı olduğu avadanlığın\n"
-#~ "adını girin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Xəbəriniz olsun, bir çox çap edici birinci paralel qapıya bağlıdır.\n"
-#~ "Bu da GNU/Linuksda \"/dev/lp0\", Windowsda isÉ™ \"LPT1\"dir."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "İndi yuxarıdakı siyahıdan çap edici seçmalisiniz."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Xahiş edirik yazıcınız üçün doğru qurğuları girin.\n"
-#~ "Nə seçəcəyinizi bilmirsiniz isə sənədlərə baxın\n"
-#~ "\n"
-#~ "\n"
-#~ "Bir sonrakı addımda yazıcınızı sınaya bilərsiniz və\n"
-#~ "daha sonra da istədiyiniz zaman dəyişdirə bilər."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Linuks sisteminiz üçün bir idarəci parolu verilməlidir. Bu parol\n"
-#~ "yazılış xətalarına meydan verməməsi və e'tibarlı olması səbəbi ilə iki "
-#~ "dəfə\n"
-#~ "girilməlidir.\n"
-#~ "\n"
-#~ "\n"
-#~ "Bu parolu diqqətli seçməlisiniz. Sadəcə idarəi parolunu bilən \n"
-#~ "adamlar sistemi idarə və dəyişiklik edə bilirlər. Ayrıca idarəci \n"
-#~ "parolu ilə sistemə girən bir adam bütün veriləri silib, sistema zərər \n"
-#~ "verə bilər. Seçdiyiniz parol alfanumerik xarakterlər daxil edib en az 8 "
-#~ "xarakter uzunluğunda olmalıdır. Hər hansı bir kağıza, dəftara qeyd\n"
-#~ "alınmamalıdır. Çox uzun bir parol və ya çox qarışıq bir parol işlədilir "
-#~ "isÉ™ \n"
-#~ "parolun xatırlanması çətinləşir.\n"
-#~ "\n"
-#~ "\n"
-#~ "İdarəci olaraq sistemə girəcayiniz zaman, giriş sırasında \"login\"\n"
-#~ "yazan qismə \"root\" və \"password\" yazan qismə idarəci parolunu\n"
-#~ "yazmalısınız."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "İndi bir ya da daha çox adamın Linuks sisteminizi istifadə etməsinə "
-#~ "icazÉ™\n"
-#~ "verə bilərsiniz. Hər istifadəçi hesabı üçün edilən dəyişikliklər sadəcə\n"
-#~ "o istifadəçi ve istifadəçinin \"istifadəçi sırası\" üçün hökmlü olar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Sistemi sadəcə siz istifadə edeceksəniz belə ayrı bir istifadəçi hesabı "
-#~ "açaraq\n"
-#~ "normal işler üçün bu hesabı istifadə etməlisiniz. İdarəçi \"root\" "
-#~ "hesabı\n"
-#~ "gündəlik işlərdə istifadə edilməməlidir. Bu bir təhlükəsizlik riski "
-#~ "təşkil edər.\n"
-#~ "Sadə bir istifadəçi hesabı ilə işləmək sizi və sistemi size qarşı\n"
-#~ "qoruyar. İdarəci hesabı olan \"root\" sadəcə, sadə bir istifadəçi hesabı\n"
-#~ "ilə etməyəcəyiniz idarə və təmir işləri üçün istifadə edilməlidir."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Başlanğıc disketi yaradılması aşırı dərəcədə tövsiyyə edilir.\n"
-#~ "Sistemi aça bilmədiyiniz zaman bu, sizin üçün tək qurtuluş yolu olar.\n"
-#~ "Yoxsa sistemi yenidən yükləmək məcburiyyətindəsiniz."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO və grub ana seçənəkləri bunlardır: \n"
-#~ "- Açılış avadanlığı: Açılış sektorunu olduğu sabit disk bölməsini daxil "
-#~ "edən avadanlığın\n"
-#~ "adını təyin edər.\n"
-#~ "�gər heç bir şey bilmirsinizsə \"/dev/hda\"yı seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "- �sas əks ilə açmadan əvvəl gecikmə: Açılış sistem yükləyicisinin ilk \n"
-#~ "əksi açmadan əvvəl gözləyəcəyi zamanın, saniyənin onda biri cinsindən "
-#~ "miqdarıdır.\n"
-#~ "Bu, klaviaturanın fəallaşmasından həmən sonra sabit diskdən açılan "
-#~ "sistemlər üçün faydalıdır.\n"
-#~ "Sistem yükləyicisi, əgər \"delay\" sıfır olaraq verilmiş isə\n"
-#~ "heç gözləməz.\n"
-#~ "\n"
-#~ "\n"
-#~ "- Ekran modu: Açılışda bir neçə mətn ekran modu seçilə bilər:\n"
-#~ "   * sadə: 80x25 mətn ekran açılır.\n"
-#~ "    * <rəqəm>: Göstərilənn rəqəmlərə görə mətn ekran rezolyusiyası "
-#~ "quraşdırılır.\n"
-#~ "\n"
-#~ "\n"
-#~ "- \"/tmp\"I hər açılışda təmizlə: �gər hər açılışda \"/tmp\" cərgəsində "
-#~ "olan bütün\n"
-#~ "olan bütün cərgə və qovluqların silinməsini istəyirsinizsə, bu seçənəyi "
-#~ "seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "- Var olan RAM miqdarı: Təəsüf ki, Linuks həmişə RAM miqdarını BIOSdan "
-#~ "düzgün\n"
-#~ "bir şəkildə öyrənəməyə bilər. Onda siz çzünüz sisteminizdə olan həqiq RAM "
-#~ "miqdarını buradan\n"
-#~ "girə bilərsiniz. Yadda saxlayın ki, həqiqi RAM ilə sistemin tapdığı "
-#~ "miqdar arasında 2\n"
-#~ "və ya 4 MBlıq fərq ola bilər."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO (Linuks Yükləyici) SPARC üçün bir sistem yükləyicidir: sistemi "
-#~ "Linuks\n"
-#~ "ya da kompüterinizdəki başqa bir əməliyyat sistemiylə aça bilirlər.\n"
-#~ "�sasən bu digər əməliyyat sistemləri doğru bir şəkildə təsbit edilib "
-#~ "açılışa\n"
-#~ "qurula bilərlər. �gər bir problem olarsa, buradan əllə əlavə edilə "
-#~ "bilərlər.\n"
-#~ "Parametrlər mövzusunda diqqətli olun."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "  - Açılış avadanlığı: Açılış sektorunu olduğu sabit disk bölməsini daxil "
-#~ "edən avadanlığın\n"
-#~ "adını təyin edər.\n"
-#~ "�gər heç bir şey bilmirsinizsə \"/dev/hda\"yı seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ana əks ilə açmadan əvvəl gecikmə: Açılış sistem yükləyicisinin ilk \n"
-#~ "görünüşü açmadan əvvəl gözləyəcəyi zamanın, saniyənin onda biri cinsindən "
-#~ "miqdarıdır.\n"
-#~ "Bu, klaviaturanın aktivləşməsindən həmən sonra sabit diskdən açılan "
-#~ "sistemlər üçün faydalıdır.\n"
-#~ "Sistem yükləyicisi, əgər delay sıfır olaraq verilmiş isə\n"
-#~ "heç gözləməz."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Buradan etibarən, Linuks GUI (Qrafik İstifadəçi Ara üzü) çəkirdəyini\n"
-#~ "əmələ gətirən X Window sistemini quracağıq. Buna görə də ekran kartınızı\n"
-#~ "və monitorunuzu qurmalısınız. Bu addımların çoxu onsuz da avtomatik "
-#~ "olaraq\n"
-#~ "keçiləcək və sizə sadəcə olaraq tövsiyə edilən qurğuları incələmək və "
-#~ "qəbul etmək\n"
-#~ "düşəcək. :-)\n"
-#~ "\n"
-#~ "\n"
-#~ "Quruluş qurtardığında əgər DrakXdən əksini istəmədiniz isə X Window \n"
-#~ "başlayacaqdır. Qurğuşarınıza baxın və yoxlayın. Qurğularınızı yoxlayaraq\n"
-#~ "uyuşmazlıq olub olmadığına baxın, lazım gəlirsə geriyə dönün."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr "X qurğularında problem olarsa aşağıdakı seçənəkləri istifadə edin."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "�gər sistemə girərkən qrafik arar üzünün gəlməsini istəyirsənız isə \"Bəli"
-#~ "\",əks halda \"Xeyr\" düyməsinə basın."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Sisteminiz üçün təhlükəsizlik səviyyəsini seçə bilərsiniz. �traflı "
-#~ "mə'lumat üçün xahiş edirik bələdçiyə\n"
-#~ " baş vurun. �sasən , nə seçəcəyinizi bilmirsiniz isə buraya heç "
-#~ "toxunmayın.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "İndi sistem yenidən qapanıb açılacaqdır.\n"
-#~ "\n"
-#~ "Açıldıqdan sonra Linuks Mandrake avtomatik olaraq yüklənəcəkdir. �gər "
-#~ "baÅŸqa \n"
-#~ "bir əməliyyat sistemi də işlədəcəksəniz əlavə xəbərdarlıqları oxuyun."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Çex dili (Proqramcılar)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovakca (Proqramcılar)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Yaradılacaq profil adı:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "/etc/fstab-a Yaz"
-
-#~ msgid "Restore from file"
-#~ msgstr "Fayldan geri çağır"
-
-#~ msgid "Save in file"
-#~ msgstr "Fayla qeyd et"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Disketdən geri çağır"
-
-#~ msgid "Format all"
-#~ msgstr "Hamısını şəkilləndir"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Bütün bölmələri şəkilləndirdikdən sonra, "
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "bu bölmələrdəki bütün verilər itəcəkdir"
-
-#~ msgid "Reload"
-#~ msgstr "Yenidən yüklə"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Linuks köçürülməsi üçün bir dənə avtomatik qurulum disketi yaratmaq "
-#~ "istəyərmisiniz?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL quraşdırılması"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Uzaq CUPS vericiləri üçün heç bir quraşdırmaya lüzüm yoxdur \n"
-#~ "Buradakı hər çap edici avtomatik tapılacaqdır. \n"
-#~ "�gər uzaq çap edici vericiniz var ise CUPS vercisinin \n"
-#~ "IP ünvanını verməlisiniz. Qapı nömrəsi vacib \n"
-#~ "deyil."
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Uzaqdakı növbə adı"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Sahə(domain) adı"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Çap Edicisiz"
-
-#, fuzzy
-#~ msgid "start it"
-#~ msgstr "məhdudlaşdır"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Şəbəkə Monitoru"
-
-#~ msgid "Profile "
-#~ msgstr "Profil "
-
-#~ msgid "Statistics"
-#~ msgstr "Statistikalar"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Yollama Sür'əti:"
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Alam Sür'əti:"
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Bağlantı növü:"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "İnternetə bağlanılır"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "İnternet ilə bağlantını kəs"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "İnternet ilə bağlantı kəsilməsi bacarılmadı."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "İnternet ilə bağlantı kəsilməsi qurtardı."
-
-#~ msgid "Connection complete."
-#~ msgstr "Bağlantı qurtardı."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Bağlantı iflas etdi.\n"
-#~ "Qurğularınızı Mandrake İdarə Mərkəzindən yoxlayın."
-
-#, fuzzy
-#~ msgid "Color configuration"
-#~ msgstr "Quraşdırma"
-
-#~ msgid "sent: "
-#~ msgstr "yollandı:"
-
-#~ msgid "received: "
-#~ msgstr "alındı:"
-
-#~ msgid "Connect"
-#~ msgstr "BaÄŸlan"
-
-#~ msgid "Disconnect"
-#~ msgstr "Bağlantını kəs"
-
-#~ msgid "/File/_New"
-#~ msgstr "/Fayl/_Yeni"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>Y"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/Fayl/_Aç"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>A"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/Fayl/_Qeyd Et"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>Q"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/Fayl/_Fərqli Qeyd Et"
-
-#~ msgid "/File/-"
-#~ msgstr "/Fayl/-"
-
-#~ msgid "/_Options"
-#~ msgstr "/_Seçənəklər"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/Seçənəklər/Sınaq"
-
-#~ msgid "/_Help"
-#~ msgstr "/_Yardım"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/Yardım/_Haqqında..."
-
-#~ msgid "Default Runlevel"
-#~ msgstr "�sas Runlevel"
-
-#~ msgid "Europe"
-#~ msgstr "Avropa"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "Növbəni sil"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Quraşdırma faylının içindəkilərlə oynanılmaz"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Tanınmaz quraşdırma faylı"
-
-#~ msgid "Adapter"
-#~ msgstr "Adapter"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "BaÄŸla"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Aç"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "İndi siçanı sınaya bilərsiniz. Hər şeyin yolunda olduğunu \n"
-#~ "sınamaq üçün düymə və çarxı işlədin. Qurğular yaxşı isə\n"
-#~ "problem yoxdur. �gər deyilsə onda \"Ləğv et\"i tıqlayaraq\n"
-#~ "başqa siçan sürücüsü seçə bilərsiniz."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (və ya ADSL) bağlantısı"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Qapat"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "CUPS ilə çap ediciyə yetişmək üçün URIni verməlisiniz"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Bəli, ASCII sınaq səhifəsi çap et"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Bəli, PostScript sınaq səhifəsi çap et"
-
-#~ msgid "Paper Size"
-#~ msgstr "Kağız Böyüklüyü"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "İş bittikdən sonra səhifə atılsın mı?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint sürücü seçənəkləri"
-
-#~ msgid "Color depth options"
-#~ msgstr "Rəng dərinlik seçənəkləri"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Mətni PostScript olaraq yazdırsın mı?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Mətn pilləli olaraq düzəldilsin mi?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Hər yekun səhifəsinin nömrəsi"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Sağ/Sol boşluqlar nöqtəvi(inch'in 1/72'si"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Üst/Alt boşluqlar nöqtəvi (inch'in 1/72'si)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "�lavə GhostScript seçənəkləri"
-
-#~ msgid "Extra Text options"
-#~ msgstr "�lavə mətn seçənəkləri"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Tərs səhifə sıralaması"
-
-#~ msgid "CUPS starting"
-#~ msgstr "CUPS başlayır"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Çap Edici Bağlantısı Seçin"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Hər çap edicinin bir adı olmalıdır (məsələn lp).\n"
-#~ "Çap edicinin təsviri və yeri də göstərilməlidir.\n"
-#~ "Bu çap edicinin adı nədir və yeri haradadır?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Hər çap edici növbəsinin (çap edici işlərinin yollandığı yer) bir adı "
-#~ "olar \n"
-#~ "(çoxunda lp) və gözləmə qovluğuna ehtiyac duyar. Bu növbə üçün\n"
-#~ "hansı ad və qovluq istifadə edilsin?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Növbənin adı"
-
-#~ msgid "Spool directory"
-#~ msgstr "Gözləmə qovluğu"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Daha e'tibarlı bir sistem üçün \"Kölgə parol işlət\" və \"MD5 kodlama \n"
-#~ "işlət\" seçənəklərini işarətlayin."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "�gər şəbəkədə NIS istifadə edilirsə, \"NIS işlət\" seçəneyini "
-#~ "işarətləyin.  �gər \n"
-#~ "bilmirsinizsə sistem idarəcinizə soruşun."
-
-#~ msgid "yellow pages"
-#~ msgstr "sarı səhifələr"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Yerli Şəbəkə quraşdırılması"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Ä°XM dns 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Ä°XM dns 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "İnternetə necə bağlanmaq istəyirsiniz?"
diff --git a/perl-install/share/po/b_dump_strings.pm b/perl-install/share/po/b_dump_strings.pm
deleted file mode 100644
index f29275ecd..000000000
--- a/perl-install/share/po/b_dump_strings.pm
+++ /dev/null
@@ -1,113 +0,0 @@
-package b_dump_strings;
-
-use B qw(minus_c save_BEGINs peekop class walkoptree walkoptree_exec
-         main_start main_root cstring sv_undef);
-
-BEGIN { open OUT, ">$ENV{OUTFILE}" }
-
-sub B::CV::debug {
-    my ($sv) = @_;
-    B::walkoptree_exec($sv->START, "debug");
-}
-
-sub B::OP::debug {
-    my ($op) = @_;
-#    print "OP ", class($op), " ", $op->name, "\n";
-    eval {
-	if ($op->name eq 'entersub') {
-	    $op2 = $op->first->first or return;
-
-	    if ($op2->name eq 'pushmark') {
-		my $s = $op2->sibling->sv->PV;
-		my $l;
-		for ($l = $op2->sibling; ${$l->sibling}; $l = $l->sibling) {}
-
-		$s =~ s/"/\\"/g;
-		if ($l->first->sv->NAME eq '_') {
-		    print OUT qq($::pkg _("$s")\n);
-		}
-	    }
-	}
-    };
-}
-sub B::RV::debug {
-    my ($op) = @_;
-    $op->RV->debug;
-}
-sub B::SVOP::debug {
-    my ($op) = @_;
-    $op->sv->debug;
-}
-sub B::PV::debug {
-    my ($sv) = @_;
-#    print "STRING ", $sv->PV, "\n";
-}
-sub B::IV::debug {
-    my ($sv) = @_;
-#    printf "IV\t%d\n", $sv->IV;
-}
-sub B::NV::debug {
-    my ($sv) = @_;
-#    printf "NV\t%s\n", $sv->NV;
-}
-sub B::PVIV::debug {
-    my ($sv) = @_;
-#    printf "IV\t%d\n", $sv->IV;
-}
-sub B::PVNV::debug {
-    my ($sv) = @_;
-#    printf "NV\t%s\n", $sv->NV;
-}
-sub B::AV::debug {
-    my ($av) = @_;
-#    print "ARRAY\n";
-}
-sub B::GV::debug {
-    my ($gv) = @_;
-#    printf "GV %s::%s\n", $gv->STASH->NAME, $gv->SAFENAME;
-}
-sub B::NULL::debug { 
-#    print "NUL\n";
-}
-sub B::SPECIAL::debug {}
-
-sub B::SV::debug { die "SV"; }
-sub B::BM::debug { 
-    die "BM"; 
-}
-sub B::PVLV::debug { die "PVLV"; }
-
-sub B::GV::pgv {
-    my ($gv) = @_;
-#    print $gv->NAME, "\n";
-    $gv->SV->debug;
-    $gv->HV->debug;
-    $gv->AV->debug;
-    $gv->CV->debug;
-}
-
-
-
-
-sub search {
-
-foreach my $pkg (grep { /^[a-z]/ && !/^(diagnostics|strict|attributes|main)/ } grep { /\w+::$/ } keys %main::) {
-    $::pkg = $pkg;
-    foreach (keys %{$main::{$pkg}}) {
-	print STDERR "$pkg $_ XXXXX\n";
-	local *f = *{$main::{$pkg}{$_}};
-	B::svref_2object(\*f)->pgv;
-    }
-}
-print STDERR "DONE\n";
-}
-
-CHECK { search() }
-INIT { exit 0 }
-
-#use lib qw(. /home/pixel/gi/perl-install);
-##use commands;
-#require '/tmp/t.pl';
-#search();
-
-1;
diff --git a/perl-install/share/po/be.po b/perl-install/share/po/be.po
deleted file mode 100644
index 5513308cb..000000000
--- a/perl-install/share/po/be.po
+++ /dev/null
@@ -1,10728 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999 MandrakeSoft.
-# Alexander Bokovoy <ab@avilink.net>, 2000
-# Maryia Davidouskaia <maryia@scientist.com>, 2000
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2000-09-24 12:30 +0100\n"
-"Last-Translator: Alexander Bokovoy <ab@avilink.net>\n"
-"Language-Team: be\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=windows-1251\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:235
-#, fuzzy, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Êàíôiãóðàâàöü ìàþ êàðòó"
-
-#: ../../Xconfigurator.pm_.c:238
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "÷ûòàííå íàñòðîéêi"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Âiäýàêàðòà"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Àáÿðûöå âiäýàêàðòó"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Àáÿðûöå X ñåðâåð"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X ñåðâåð"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "Ñåðâåð XFree86 %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "ßêóþ êàíôiãóðàöûþ XFree âû æàäàåöå àòðûìàöü?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ïàäòðûìêà 3D-ïàñêàðýííÿ ¢ Âàøàé â³äýàêàðöå âûêàíàíà òîëüê³ ¢ XFree %s.\n"
-"XFree %s ìîæà âûêàðûñòî¢âàöü òîëüê³ 2D-ïàñêàðýííå äëÿ ãýòàé â³äýàêàðòû."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Âàøà âiäýàêàðòà ìîæà ìåöü 3D-ïàñêàðýííå, ÿêîå ïàäòðûìëiâàåööà òîëüêi XFree %"
-"s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ç ïàäòðûìêàé 3D-ïàñêàðýííÿ"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Âàøà âiäýàêàðòà ìîæà ìåöü 3D-ïàñêàðýííå, ÿêîå ïàäòðûìëiâàåööà òîëüêi XFree %"
-"s.\n"
-"ÌÀÉÖÅ ÍÀ ¡ÂÀÇÅ, ØÒÎ ÃÝÒÀ ÝÊÑÏÅÐÛÌÅÍÒÀËÜÍÀß ÏÀÄÒÐÛÌÊÀ I ÌÎÆÀ ÏÐÛÂÅÑÖI ÄÀ\n"
-"ÇÀÂIÑÀÍÍß ÂÀØÀÃÀ ÊÀÌÏ'ÞÒÝÐÓ."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ç ýêñïåðûìåíòàëüíàé ïàäòðûìêàé 3D-ïàñêàðýííÿ"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Âàøà âiäýàêàðòà ìîæà ìåöü 3D-ïàñêàðýííå, ÿêîå ïàäòðûìëiâàåööà òîëüêi XFree %"
-"s.\n"
-"ÌÀÉÖÅ ÍÀ ¡ÂÀÇÅ, ØÒÎ ÃÝÒÀ ÝÊÑÏÅÐÛÌÅÍÒÀËÜÍÀß ÏÀÄÒÐÛÌÊÀ I ÌÎÆÀ ÏÐÛÂÅÑÖI ÄÀ\n"
-"ÇÀÂIÑÀÍÍß ÂÀØÀÃÀ ÊÀÌÏ'ÞÒÝÐÓ. Âàøà âiäýàêàðòà ïàäòðûìëiâàåööà XFree %s, ÿêi\n"
-"ëåïåé ïàäòðûìëiâàå êàðòû ç 2D-ïàñêàðýííåì."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "Íàñòðîéêà XFree"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Ïàçíà÷öå ïàìåð âiäýàïàìÿöi"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Àáÿðûöå äàäàòêîâûÿ íàñòðîéêi äëÿ ñåðâåðà"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Àáÿðûöå ìàíiòîð"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Ìàíiòîð"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Äâà êðûòû÷íûõ ïàðàìåòðû - ãýòà ÷àñö³íÿ âåðòûêàëüíàé ðàçãîðòêi, öi\n"
-"÷àñö³íÿ àäíà¢ëåííÿ ¢ñÿãî ýêðàíó, à òàêñàìà áîëåé âàæíû ïàðàìåòð -\n"
-"÷àñö³íÿ ãàðûçàíòàëüíàé ñiíõðàíiçàöûi ðàçãîðòêi, öi ÷àñö³íÿ âûâàäó\n"
-"ðàäêî¢ ýêðàíó.\n"
-"\n"
-"ÂÅËÜÌI ÂÀÆÍÀ, êàá àáðàíû âàìi ìàíiòîð ìå¢ ÷àñö³íþ ñiíõðàíiçàöûi, ÿêàÿ\n"
-"íå ïåðàâûøàå ôàêòû÷íûÿ ìàã÷ûìàñöi âàøàãà ìàíiòîðó: ó ïðîöiëåãëûì âûïàäêó\n"
-"âû ìîæàöå ñàïñàâàöü ìàíiòîð.\n"
-"Êàëi âû ñóìíÿâàåöåñÿ, àáÿðûöå êàíñåðâàòû¢íûÿ íàñòðîéêi."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "×àñö³íÿ ãàðûçàíòàëüíûé ðàçãîðòêi"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "×àñö³íÿ âåðòûêàëüíàé ðàçãîðòêi"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Ìàíiòîð ïàêóëü íå íàñòðîåíû"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Âiäýàêàðòà ÿø÷ý íå àäêàíôiãóðàâàíà"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Ïàìåðû ýêðàíó ÿø÷ý íå ïàçíà÷àíû"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Öi æàäàåöå ïðàòýñöiðàâàöü íàñòðîéêi?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Ïàïÿðýäæàííå: òýñöiðàâàííå íà ãýòàé âiäýàêàðöå íåáÿñïå÷íà"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Ïðàâåðêà ïàðàìåòðࢠíàñòðîéêi"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"ïàñïðàáóéöå çìÿíiöü íåêàòîðûÿ ïàðàìåòðû"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Ïàìûëêà:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Çàñòàëîñÿ %d ñåêóíäà¢"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Ãýòà äàêëàäíûÿ ïàðàìåòðû íàñòðîéêi?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Àòðûìàíà ïàìûëêà, ïàñïðàáóéöå çìÿíiöü ïàðàìåòðû"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Ïàìåðû ýêðàíó"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Âûáàð ïàìåðࢠýêðàíó i ãëûáiíi êîëåðó"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Âiäýàêàðòà: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Ñåðâåð XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-#, fuzzy
-msgid "Expert Mode"
-msgstr "Ýêñïåðò"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Ïàêàçàöü óñ¸"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Ïàìåðû ýêðàíó"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Òûï êëàâiÿòóðû: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Òûï ìûøû: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Ìûø: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Ìàíiòîð: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "×àñö³íÿ ãàð.ðàçã. ìàíiòîðó: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "×àñö³íÿ âåðò.ðàçã. ìàíiòîðó: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Âiäýàêàðòà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Âiäýàêàðòà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Âiäýàïàìÿöü: %s Êá\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Ïàðàìåòðû ãëûáiíi êîëåðó: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Ïàìåðû ýêðàíó: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Ñåðâåð XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Ñåðâåð XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Ïàäðûõòî¢êà íàñòðîéêi X-Window"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Øòî âû æàäàåöå çðàáiöü?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Çìÿíiöü ìàíiòîð"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Çìÿíiöü âiäýàêàðòó"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Çìÿíiöü íàñòðîéêi Ñåðâåðó"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Çìÿíiöü ïàìåðû ýêðàíó"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Iíôàðìàöûÿ"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Ïðàâåðûöü ÿø÷ý ðàç"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Âûõàä"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Ö³ æàäàåöå Âû çàõàâàöü çìÿíåíí³?\n"
-"Áÿãó÷àÿ êàíô³ãóðàöûÿ:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Êàëi ëàñêà, ïåðàéäçiöå ¢ %s äëÿ àêòûâàöûi çìÿíåííÿ¢"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Êàëi ëàñêà, âûéäçiöå, à ïîòûì ñêàðûñòàéöå Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "Çàïóñê X ïðû ñòàðöå ñiñòýìû"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ìîæíà íàñòðîiöü ñiñòýìó äëÿ à¢òàìàòû÷íàãà çàïóñêó X ïàñëÿ ñòàðòó ñiñòýìû.\n"
-"Æàäàåöå, êàá X ñòàðòàâࢠïðû ðýñòàðöå?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 êîëåðࢠ(8 áiòà¢)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 òûñÿ÷û êîëåðࢠ(15 áiòà¢)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 òûñÿ÷ êîëåðࢠ(16 áiòà¢)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 ìiëü¸íࢠêîëåðࢠ(24 áiòû)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 ìiëiÿðäà êîëåðࢠ(24 áiòû)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 Êá"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 Êá"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 Ìá"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 Ìá"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 Ìá"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 Ìá"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-#, fuzzy
-msgid "16 MB"
-msgstr "1 Ìá"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-#, fuzzy
-msgid "32 MB"
-msgstr "2 Ìá"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 Ìá öi áîëåé"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Ñòàíäàðòíû VGA, 640x480 ïðû 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 ïðû 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Ñóìåñíû ç 8514, 1024x768 ïðû 87 Hz ïðàçðàäêîâà (íÿìà 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ïði 87 Hz ïðàçðàäêîâà, 800x600 ïðû 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 ïðû 60 Hz, 640x480 ïðû 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Íåïðàçðàäêîâà SVGA, 1024x768 ïðû 60 Hz, 800x600 ïðû 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Âûñîê÷àñö³í¸âû SVGA, 1024x768 ïðû 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Øìàò÷àñö³í¸âû, ÿêi çäîëüíû ïàäòðûìëiâàöü 1280x1024 ïðû 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Øìàò÷àñö³í¸âû, ÿêi çäîëüíû ïàäòðûìëiâàöü 1280x1024 ïðû 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Øìàò÷àñö³í¸âû, ÿêi çäîëüíû ïàäòðûìëiâàöü 1280x1024 ïðû 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Ìàíiòîð, ÿêi çäîëüíû ïàäòðûìëiâàöü 1600x1200 ïðû 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Ìàíiòîð, ÿêi çäîëüíû ïàäòðûìëiâàöü 1600x1200 ïðû 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Ïåðøû ñåêòàð çàãðóçà÷íàãà ðàçäçåëó"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Ïåðøû ñåêòàð ïðûëàäû (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "Óñòàëÿâàííå SILO"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Êóäû âû æàäàåöå ¢ñòàëÿâàöü ïà÷àòêîâû çàãðóç÷ûê?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "Óñòàëÿâàííå LILO/GRUB"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Ãàëî¢íûÿ îïöûi ïà÷àòêîâàãà çàãðóç÷ûêó"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-#, fuzzy
-msgid "Bootloader to use"
-msgstr "Ãàëî¢íûÿ îïöûi ïà÷àòêîâàãà çàãðóç÷ûêó"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Óñòàëÿâàííå çàãðóç÷ûêó"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Çàãðóçà÷íàÿ ïðûëàäà"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (íå ïðàöóå ïðû ñòàðûõ âåðñiÿõ BIOS)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Êàìïàêòíà"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "êàìïàêòíà"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Âiäýà-ðýæûì"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Çàòðûìêà ïåðàä çàãðóçêàé âîáðàçó ïà äàìà¢ëåííþ"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Ïàðîëü"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Ïà¢òàðûöå ïàðîëü"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Àáìåæàâàííå îïöûÿ¢ êàìàíäíàãà ðàäêà"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "àáìåæàâàííå"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "À÷ûø÷àöü /tmp ïðû êîæíàé çàãðóçöû"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ïàçíà÷öå äàêëàäíû ïàìåð RAM (çíîéäçåíà %d Má)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Äàñòóïíà øìàò ïðîôiëÿ¢"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Ïàçíà÷öå ïàìåð RAM ó Má"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Îïöûÿ ``Àáìåæàâàííå îïöûÿ¢ êàìàíäíàãà ðàäêó'' íå âûêàðûñòî¢âàåööà áåç ïàðîëÿ"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Ïàñïðàáóéöå ÿø÷ý ðàç"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Ïàðîëi íå ñóïàäàþöü"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:185
-#, fuzzy
-msgid "Default OS?"
-msgstr "Ïà äàìà¢ëåííþ"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Ó ìåíþ ìàþööà íàñòóïíûÿ ïóíêòû.\n"
-"Âû ìîæàöå äàäàöü ÿø÷ý, àëüáî çìÿíiöü iñíóþ÷ûÿ."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Äàäàöü"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Çðîáëåíà"
-
-#: ../../any.pm_.c:217
-#, fuzzy
-msgid "Modify"
-msgstr "Çìÿíiöü RAID"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "ßêi òûï ïóíêòà æàäàåöå äàäàöü?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Iíøàÿ ÀÑ (SunOS,...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Iíøàÿ ÀÑ (MacOS,...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Iíøàÿ ÀÑ (windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Âîáðàç"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Äàëó÷ûöü"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "×ûòàííå-çàïiñ"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Òàáëiöà"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Íåíàäçåéíà"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Ìåòêà"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Ïà äàìà¢ëåííþ"
-
-#: ../../any.pm_.c:278
-#, fuzzy
-msgid "Initrd-size"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Âûäàëiöü çàïiñ"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Ïóñòàÿ ìåòêà íå äàçâàëÿåööà"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Ãýòàÿ ìåòêà ¢æî âûêàðûñòî¢âàåööà"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Çíîéäçåíû %s %s iíòýðôåéñû"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Öi ¸ñöü ó âàñ iíøû?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Öi ¸ñöü ó âàñ %s iíòýðôåéñ?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Íå"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Òàê"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Ãë. àïiñàííå àáñòàëÿâàííÿ"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Óñòàëÿâàííå äðàéâåðó äëÿ %s êàðòû %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(ìîäóëü %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "ßêi äðàéâåð %s ïàñïðàáàâàöü?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Ó íåêàòîðûõ âûïàäêàõ %s äðàéâåðó ïàòðýáíà íåêàòîðàÿ äàäàòêîâàÿ iíôàðìàöûÿ,\n"
-"àëå çâû÷àéíà ãýòà íå ïàòðàáóåööà. Öi íå æàäàåöå âû çàäàöü äëÿ ÿãî\n"
-"äàäàòêîâûÿ îïöûi, öi äàçâîëiöå äðàéâåðó ïðàòýñöiðàâàöü ìàøûíó\n"
-"¢ ïîøóêàõ íåàáõîäíàé iíôàðìàöûi? Ìàã÷ûìà, òýñöiðàâàííå ïðûâÿäçå\n"
-"äà ñïûíåííÿ êàìï'þòýðó, àëå ÿíî íi÷îãà íå ñàïñóå."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "À¢òàïîøóê"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Ïàçíà÷öå ïàðàìåòðû"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Âû íå ìîæàöå çàäàöü îïöûi ìîäóëþ %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Âû íå ìîæàöå çàäàöü îïöûi ìîäóëþ %s.\n"
-"Îïöûi - ó ôàðìàöå ``iìÿ=çíà÷ýííå iìÿ2=çíà÷ýííå2 ...''.\n"
-"Íàïðûêëàä, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Îïöûi ìîäóëþ:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Çàãðóçêà ìîäóëþ %s íå ïðàéøëà.\n"
-"Æàäàåöå ïàñïðàáàâàöü ç iíøûìi ïàðàìåòðàìi?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(óæî äàäàäçåíà %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Ãýòû ïàðîëü çàíàäòà ïðîñòû"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Êàëi ëàñêà, óâÿäçiöå iìÿ êàðûñòàëüíiêó"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Iìÿ êàðûñòàëüíiêó ïàâiííà çìÿø÷àöü ëiòàðû òîëüêi íà íiæíiì ðýãiñòðû, \n"
-"ëi÷áû, `-' i `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Ãýòà iìÿ êàðûñòàëüíiêó ¢æî äàäàäçåíà"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Äàäàöü êàðûñòàëüíiêà"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Óâÿäçiöå iìÿ êàðûñòàëüíiêó\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Ïðûíÿöü êàðûñòàëüíiêà"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Óëàñíàå iìÿ"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Iìÿ êàðûñòàëüíiêó:"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Àáàëîíêà:"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Ïiêòàãðàìà"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "À¢òàìàòû÷íû ¢âàõîä ó ñiñòýìó"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ìîæíà íàñòðîiöü ñiñòýìó äëÿ à¢òàìàòû÷íàãà ¢âàõîäó ¢ ñiñòýìó äëÿ\n"
-"àäíàãî êàðûñòàëüíiêà. Êàëi Âû íå æàäàåöå ãýòàãà, íàöiñíiöå \"Àäìåíà\"."
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Àáÿðûöå àñíî¢íàãà êàðûñòàëüíiêà:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Àáÿðûöå ìýíýäæàð âîêíà¢:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Êàëi ëàñêà, àáÿðûöå ìîâó äëÿ êàðûñòàííÿ."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "Âû ìîæàöå àáðàöü ³íøûÿ ìîâû, ÿêiÿ áóäóöü äàñòóïíû ïàñëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Óñ¸"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "Íå õàïàå äûñêàâàé ïðàñòîðû ¢ /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Ïðàöî¢íû ñòîë"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Ñòàðòàâàå ìåíþ"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Êóäû âû æàäàåöå ¢ñòàëÿâàöü ïà÷àòêîâû çàãðóç÷ûê?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "Íàñòðîéêà ìàäýìó"
-
-#: ../../bootlook.pm_.c:79
-#, fuzzy
-msgid "/_File"
-msgstr "Ôàéëû:\n"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr ""
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Ìàíiòîð"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Çìÿíiöü ìàíiòîð"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:100
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Ðýæûì çëó÷ýííÿ"
-
-#: ../../bootlook.pm_.c:102
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå"
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-#, fuzzy
-msgid "Configure"
-msgstr "Íàñòðîéêà X Window"
-
-#: ../../bootlook.pm_.c:108
-#, fuzzy
-msgid "Boot mode"
-msgstr "Çàãðóçà÷íàÿ ïðûëàäà"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr ""
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Àäìåíà"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr ""
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Óñòàëÿâàííå LILO íå àòðûìàëàñÿ. Óçíiêëà íàñòóïíàÿ ïàìûëêà:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr ""
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr ""
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "Ìá"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d õâiëií"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 õâiëiíà"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d ñåêóíäà¢"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Ïà-ïåðøàå, çðàáiöå ðýçåðâîâóþ êîïiþ âàøûõ äàäçåíûõ"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "×ûòàéöå ¢âàæëiâà!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Êàëi âû ïëàíóåöå âûêàðûñòî¢âàöü boot âîáëàñöü, òàäû ðàçìÿñöiöå ÿå\n"
-" íå äàëåé çà 2048 ñåêòàðî¢ àä ïà÷àòêó äûñêà"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Ïàìûëêà"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Ìàéñòàð ñòâàðýííÿ"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Íîâû"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "Çíiø÷ûöü"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Êðîïêà ìàíöiðàâàííÿ"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Îïöûi"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Òûï"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Ðàçìàíöiðàâàöü"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Ìàíöiðàâàííå"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Àáÿðûöå äçåÿííå"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Çàðàç âû ìàåöå òîëüêi àäçií âÿëiêi ðàçäçåë FAT\n"
-"(ÿê³ çâû÷àéíà âûêàðûñòî¢âàå MS Dos/Windows).\n"
-"Ïðàïàíóþ, ïà-ïåðøàå, çìÿíiöü ïàìåðû ðàçäçåëà\n"
-"(êëiêíiöå íà ÿãî, à ïîòûì íà \"çìÿíåííå ïàìåðà¢\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Íàö³ñí³öå íà ðàçäçåë"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Íàö³ñí³öå íà ðàçäçåë"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Íàö³ñí³öå íà ðàçäçåë"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Ïàäðàáÿçíàñöi"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "ïàìûëêà ìàíöiðàâàííÿ"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Ïóñòà"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "²íøûÿ"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Òûïû ôàéëàâûõ ñiñòýìà¢:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Ñòâàðûöü"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Âûêàðûñòî¢âàéöå ``%s'' çàìåñò"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Çíiø÷ûöü"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Ñïà÷àòêó çðàáiöå ``Unmount''"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Óñå äàäçåíûÿ ¢ ðàçäçåëå %s áóäóöü ñòðà÷àíû ïàñëÿ çìåíû ÿãî òûïó"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Êóäû âû æàäàåöå ìàíöiðàâàöü ïðûëàäó %s?"
-
-#: ../../diskdrake.pm_.c:500
-#, fuzzy
-msgid "Mount options"
-msgstr "Îïöûi ìîäóëþ:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:525
-#, fuzzy
-msgid "Removable media"
-msgstr "À¢òàìàíöiðàâàííå çìåííûõ íàçàïàøâàëüí³êà¢"
-
-#: ../../diskdrake.pm_.c:532
-#, fuzzy
-msgid "Change type"
-msgstr "Çìÿíiöü òûï ðàçäçåëó"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-#, fuzzy
-msgid "Which filesystem do you want?"
-msgstr "ßêóþ ñiñòýìó äðóêó Âû æàäàåöå âûêàðûñòî¢âàöü?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-#, fuzzy
-msgid "Server"
-msgstr "ñåðâåð"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Àáÿðûöå äçåÿííå"
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Ñòâàðýííå íîâàãà ðàçäçåëó"
-
-#: ../../diskdrake_interactive.pm_.c:188
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Ðýæûì ýêñïåðòó"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Çâû÷àéíû ðýæûì"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Àäêàò"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Ñàïðà¢äû ïðàöÿãâàöü?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Âûéñöi áåç çàõàâàííÿ"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Âûéñöi áåç çàïiñó òàáëiöû ðàçäçåëà¢"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Öi æàäàåöå ïðàòýñöiðàâàöü íàñòðîéêi?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Ðàçìåðêàâàöü à¢òàìàòû÷íà"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "À÷ûñöiöü óñ¸"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-#, fuzzy
-msgid "More"
-msgstr "Ïåðàíîñ"
-
-#: ../../diskdrake_interactive.pm_.c:250
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Iíôàðìàöûÿ"
-
-#: ../../diskdrake_interactive.pm_.c:267
-#, fuzzy
-msgid "Not enough space for auto-allocating"
-msgstr "Íå õàïàå ïðàñòîðû äëÿ ñòâàðýííÿ íîâûõ ðàçäçåëà¢"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Óñå ïåðøàñíûÿ ðàçäçåëû âûêàðûñòàíû"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Äàäàöü ðàçäçåë íåìàã÷ûìà"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Êàá çðàáiöü áîëüø ðàçäåëà¢, âûäàëiöå àäçií i ñòâàðûöå ïàøûðàíû ðàçäçåë "
-"(extended)"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Çàïiñ òàáëiöû ðàçäçåëà¢"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Äàäàòêîâàÿ òàáëiöà ðàçäçåëà¢"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Äàäàòêîâàÿ òàáëiöà ðàçäçåëà¢"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Äàäàòêîâàÿ òàáëiöà ðàçäçåëà¢"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "À¢òàìàíöiðàâàííå çìåííûõ íàçàïàøâàëüí³êà¢"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Àáÿðûöå ôàéë"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Òàáëiöà ðàçìÿø÷ýííÿ ðýçåðâîâàãà äûñêó ìàå iíøû ïàìåð\n"
-"Ïðàöÿãâàöü äàëåé?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Óâàãà!"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Óñòà¢öå äûñêåòó ¢ äûñêàâîä\n"
-"Óñå äàäçåíûÿ íà ãýòàé äûñêåöå áóäóöü ñòðà÷àíû"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Ïàñïðàáóåì âûðàòàâàöü òàáëiöó ðàçäçåëà¢"
-
-#: ../../diskdrake_interactive.pm_.c:340
-#, fuzzy
-msgid "Detailed information"
-msgstr "Iíôàðìàöûÿ"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Çìÿíåííå ïàìåðà¢"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Ïåðàíîñ"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Ôàðìàòàâàííå"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Àêòû¢íû"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Äàäàöü äà RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Äàäàöü äà LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Âûäàëiöü ç RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Âûäàëiöü ç LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Çìÿíiöü RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Âûêàðûñòî¢âàöü äëÿ âiðòóàëüíàé ôàéëàâàé ñiñòýìû"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Ñòâàðýííå íîâàãà ðàçäçåëó"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Ïà÷àòêîâû ñåêòàð:"
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Ïàìåð ó Ìá:"
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Òûï ôàéëàâàé ñiñòýìû:"
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Ïóíêò ìàíöiðàâàííÿ:"
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Ïàðàìåòðû: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Ôàðìàòàâàííå âiðòóàëüíàãà ðàçäçåëó %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Çìÿíiöü òûï ðàçäçåëó"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Êóäû âû æàäàåöå ìàíöiðàâàöü âiðòóàëüíóþ ïðûëàäó %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Íåëüãà ¢ñòàëÿâàöü ïóíêò ìàíöiðàâàííÿ, òàìó øòî ðàçäåë âûêàðûñòî¢âàåööà äëÿ\n"
-"âiðòóàëüíàé ôàéëàâàé ñiñòýìû.\n"
-"Ñïà÷àòêó âûäàëiöå âiðòóàëüíóþ ñiñòýìó"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Ïàäë³ê ìåæࢠôàéëàâàé ñiñòýìû FAT"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Çìÿíåííå ïàìåðà¢"
-
-#: ../../diskdrake_interactive.pm_.c:578
-#, fuzzy
-msgid "This partition is not resizeable"
-msgstr "Ïàìåðû ÿêîãà ðàçäçåëà âû æàäàåöå çìÿíiöü?"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Óñå äàäçåíûÿ ¢ ãýòûì ðàçäçåëå ïàâiííû áûöü çàðõiâàâàíûÿ"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Óñå äàäçåíûÿ ¢ ðàçäçåëå %s áóäóöü ñòðà÷àíû"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Âûáàð íîâûõ ïàìåðà¢"
-
-#: ../../diskdrake_interactive.pm_.c:591
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Ïàìåð ó Ìá:"
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Íà ÿêi äûñê ïåðàíåñö³?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Ñåêòàð"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Íà ÿêi ñåêòàð ïåðàíåñö³?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Ïåðàíîñ³ì"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Ïåðàíîñ³ööà ðàçäçåë..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Àáÿðûöå iñíóþ÷û RAID äëÿ äàäàííÿ"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "íîâû"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Âûáÿðûöå iñíóþ÷û LVM äëÿ äàáà¢ëåííÿ"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Ãýòû ðàçäçåë íå ìîæà áûöü âûêàðûñòàíû ïàä âiðòóàëüíóþ ôàéëàâóþ ñiñòýìó"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Âiðòóàëüíàÿ ôàéëàâàÿ ñiñòýìà (loopback)"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Iìÿ âiðòóàëüíàãà ðàçäçåëó"
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Óëàñíàå iìÿ"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Ôàéë óæî âûêàðûñòî¢âàåööà iíøàé âiðòóàëüíàé ñiñòýìàé. Êàëi ëàñêà, \n"
-"àáÿðûöå iíøóþ íàçâó"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Ôàéë óæî iñíóå. Âûêàðûñòàöü ÿãî?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "ïðûëàäà"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "óçðîâåíü"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "ïàìåð áëîêó"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Áóäçüöå óâàæëiâû. Ãýòóþ àïåðàöûþ íåëüãà àäìÿíiöü"
-
-#: ../../diskdrake_interactive.pm_.c:816
-#, fuzzy
-msgid "What type of partitioning?"
-msgstr "ßêi òûï äðóêàðêi âû ìàåöå?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Ïðàáà÷öå, àëå íåëüãà ñòâàðûöü /boot íà ãýòûì äûñêó (íà öûëiíäðû > 1024).\n"
-"Êàë³ âû äóìàåöå âûêàðûñòî¢âàöü LILO - òàäû ãýòà íå áóäçå ïðàöàâàöü, LILO íå "
-"âûêàðûñòî¢âàåöà, òàäû /boot íå ïàòðýáíû."
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Àáðàíû äëÿ äàäàòêó ¢ ÿêàñöi êàðàí¸âàãà (/) ðàçäçåë ôiçi÷íà çíàõîäçiöà äàëåé\n"
-"1024-ãà öûëiíäðó æîðñòêàãà äûñêó, à ¢ âàñ íÿìà ðàçäçåëó /boot .\n"
-"Êàëi áóäçå âûêàðûñòî¢âàööà äûñïå÷àð çàãðóçêi LILO, íå çàïàìÿòàéöå äàäàöü\n"
-"ðàçäçåë /boot"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Âû àáðàëi RAID ðàçäçåë ÿê êàðàí¸âû.\n"
-"Íÿìà çàãðóç÷ûêó, ÿêi á çàãðóçi¢ñÿ áåç /boot ðàçäçåëà.\n"
-"Äàäàéöå ðàçäåë /boot, êàëi ëàñêà."
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Òàáëiöà ðàçìÿø÷ýííÿ ïðûëàäû %s áóäçå çàïiñàíà íà äûñê!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Êàá çìÿíåííi ¢ñòóïiëi ¢ äçåÿííå, íåîáõîäíà ïåðàçàãðóçiööà"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Óñå äàäçåíûå ¢ ðàçäçåëå %s áóäóöü ñòðà÷àíû ïàñëÿ ôàðìàòàâàííÿ"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Ôàðìàòàâàííå"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Ôàðìàòàâàííå âiðòóàëüíàãà ðàçäçåëó %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Ôàðìàòàâàííå ðàçäçåëó %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid íå ïðàöàçäîëüíû"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Íå õàïàå ïðàñòîðû äëÿ ñòâàðýííÿ íîâûõ ðàçäçåëà¢"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Íå õàïàå ïðàñòîðû äëÿ ñòâàðýííÿ íîâûõ ðàçäçåëà¢"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Ïàìåðû ýêðàíó: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Ïðûëàäà:"
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Ëiòàðà äëÿ DOS-äûñêó: %s (íà¢ãàä)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Òûï: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Iìÿ: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Ïà÷àòàê: ñåêòàð %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Ïàìåð: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ñåêòàðà¢"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Öûëiíäðû ç %d ïà %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Ôàðìàòàâàííå\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Íå àäôàðìàòàâàíà\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Çàìàíöiðàâàíà\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Ôàéë(û) âiðòóàëüíàé ôàéëàâàé ñiñòýìû: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Çàãðóçà÷íû ðàçäçåë ïà äàìà¢ëåííþ\n"
-"    (äëÿ çàãðóçêi MS-DOS, à íå äëÿ lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Óçðîâåíü %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Ïàìåð ôðàãìåíòó %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-äûñêi %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Iìÿ ôàéëó âiðòóàëüíàé ôàéëàâàé ñiñòýìû: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Ïàìåð: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ãåàìåòðûÿ: %s öûëiíäðà¢, %s ãàëîâàê, %s ñåêòàðà¢\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Iíôàðìàöûÿ: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-äûñêi %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Òûï òàáëiöû ðàçäçåëà¢: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "íà øûíå %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Îïöûi: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ïàìûëêà ôàðìàòàâàííÿ %s"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Íå âåäàþ ÿê àäôàðìàòàâàöü %s ç òûïàì %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "ïàìûëêà ìàíöiðàâàííÿ"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "ïàìûëêà ìàíöiðàâàííÿ: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "ïàìûëêà ðàçìàíöiðàâàííÿ %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "ñåðâåð"
-
-#: ../../fsedit.pm_.c:461
-#, fuzzy
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Âû íå ìîæàöå ðàçáiâàöü íà ðàçäåëû, ïàìåð ÿêiõ ìåíåé çà 16 Ìá"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Âû íå ìîæàöå ðàçáiâàöü íà ðàçäåëû, ïàìåð ÿêiõ ìåíåé çà 32 Ìá"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Ïóíêò ìàíöiðàâàííÿ ïàâiíåí ïà÷ûíàööà ç /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Óæî ¸ñöü ðàçäçåë ç ïóíêòàì ìàíöiðàâàííÿ %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Ãýòû êàòàëîã ïàâ³íåí çíàõîäç³ööà ¢íóòðû êàðàí¸âàé ôàéëàâàé ñ³ñòýìû"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Âàì íåàáõîäíà çàäàöü ïðàâiëüíû òûï ôàéëàâàé ñiñòýìû (ext2, reiserfs)\n"
-"äëÿ ãýòàé êðîïêi ìàíöiðàâàííÿ\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Ïàìûëêà àäêðûööÿ %s äëÿ çàïiñó: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ïàìûëêà: äëÿ ñòâàðýííÿ íîâûõ ôàéëàâûõ ñiñòýìࢠíå çíàéäçåíû àäïàâåäíûÿ \n"
-"ïðûëàäû. Ïðàâåðöå àáñòàëÿâàííå äëÿ ïîøóêó iìàâåðíàé ïðû÷ûíû."
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Âû íå ñòâàðûëi àíiÿêiõ ðàçäçåëà¢!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Äàëåé àäçíà÷àíû óñå ³ñíóþ÷ûÿ ðàçäçåëû Linux, çíîéäçåíûÿ íà âàøûì äûñêó,\n"
-" ÿê³ÿ çðîáëåíû ìàéñòðàì âûëó÷ýííÿ äûñêà¢. Âû ìîæàöå ïàê³íóöü ³õ òàê ³ "
-"âûêàðûñò¢âàöü\n"
-" äàëåé, áî ÿíû äîáðà ïàäûõîäçÿöü äëÿ çâû÷àéíàãà âûêàðûñòàííÿ. Êàë³ âû\n"
-" ¢íîñ³öå çìåíû, âû ïàâ³ííû, âûëó÷ûöü õàöÿ ðàçäçåë (\"/\"). Ðàá³öå\n"
-" ðàçäçåë íå âåëüì³ ìàëûì, áî ¢ àäâàðîòíûì âûïàäêó âû íÿ çäîëååöå óñòàëÿâàöü\n"
-" äàñòàòêîâà ïðàãðàìíàãà çàáåñïÿ÷ýííÿ.Êàë³ âû æàäàåöå çàõàâàöü âàøûÿ "
-"äàäçåíûÿ\n"
-" íà àñîáíûì ðàçäçåëå, âû ïàâ³ííû àáðàöü ïóíêò ìàíö³ðàâàííÿ \"/home\".\n"
-"\n"
-"Êîæíû ðàçäçåë ïàçíà÷àíû íàñòóïíûì ÷ûíàì \"²ìÿ\", \"Ñâîéñòâû\".\n"
-"\n"
-"\n"
-"\"²ìÿ\" êàäàâàíà òàê - \"òûï äûñêó\", \"íóìàð äûñêó\", \"íóìàð ðàçäçåëó\" \n"
-"(íàïðûêëàä, \"hda1\").\n"
-"\n"
-"\n"
-"\"Òûï äûñêó\" êàäàâàíû ÿê \"hd\", êàë³ ãýòà IDE, ³ \"sd\" êàë³ SCSI.\n"
-"   * \"à\" \"master\" íà ïåðøàñíûì êàíàëå IDE \n"
-"   * \"b\" \"slave\" íà ïåðøàñíûì êàíàëå IDE\n"
-"   * \"c\" \"master\" íà äðóãàñíûì êàíàëå IDE\n"
-"   * \"d\" \"slave\" íà äðóãàñíûì êàíàëå IDE\n"
-"\n"
-"\n"
-"Äëÿ SCSI äûñêࢠ- \"a\" ãýòà \"ïåðøàñíû æîðñê³ äûñê\", \"b\" - \"äðóãàñíû "
-"æîðñê³ äûñê\", ³ ã.ä."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-#, fuzzy
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Ó ãýòûì ïóíêöå, âû ïàâ³ííû àáðàöü äçå íà âàøûì æîðñê³ì \n"
-"äûñêó óñòàëÿâàöü àïåðàöûéíóþ ñ³ñòýìó Mandrake Linux. Êàë³ äûñê ïóñòû\n"
-"àëüáî ¢ñòàëûâàíàÿ àïåðàöûéíàÿ àïåðàöûéíàÿ ñ³ñòýìà âûêàðûñòî¢âàå ¢ñþ\n"
-"äûñêàâóþ ïðàñòîðó, âû ïàâ³ííû ðàçüá³öü ÿãî íà ðàçäçåëû. Ó àñíî¢íûì,\n"
-"ðàçá³öö¸ ðàçäçåëࢠæîðñêàãà äûñêó ñêëàäàåööà ç ëàã³÷íàãà äçÿëåííÿ ÿãî\n"
-"äûñêàâàé ïðàñòîðû äçåëÿ ¢ñòàëÿâàííÿ âàøàé íîâàé ñ³ñòýìû Mandrake Linux.\n"
-"\n"
-"Òàìó ÿê âûí³ê³ ðàçá³ööÿ ðàçäçåëࢠçâû÷àéíà íåçâàðîòíûÿ, ãýòû ïðàöýñ \n"
-"ìîæà áûöü ïóæàþ÷ûì ³ íàïðóæàíûì, êàë³ âû íåâîïûòíû êàðûñòàëüí³ê. Ãýòû\n"
-"ìàéñòàð ñïðàø÷àå ãýòû ïðàöýñ. Ïåðàä òûì ÿê ïà÷àöü çâÿðí³öåñÿ, êàë³\n"
-"ëàñêà, äà äàâåäê³.\n"
-"\n"
-"Âàì ïàòðýáíà, ñàìà ìàëà, äâà ðàçäçåëû. Ïåðøû íåïàñðýäíà äëÿ àïåðàöûéíàé\n"
-"ñ³ñòýìû, ³ äðóã³ äëÿ â³ðòóàëüíàé ïàìÿö³ (Swap - ðàçäçåë).\n"
-"\n"
-"Êàë³ ðàçäçåëû ¢æî âûçíà÷àíû (ó ïàïÿðýäíÿå ¢ñòàëÿâàííå ö³ ³íøûì \n"
-"³íñòðóìàíòàì âûçíà÷ýííÿ ðàçäçåëà¢), âû ïàâ³ííû àáðàöü òûÿ, ÿê³ÿ æàäàåöå\n"
-"âûêàðûñòî¢âàöü äëÿ ¢ñòàëÿâàííÿ ñ³ñòýìû.\n"
-"\n"
-"\n"
-"Êàë³ ðàçäçåëû íå áûë³ âûçíà÷àíû, âû ïàâ³ííû ³õ ñòâàðûöü. Êàá çðàá³öü \n"
-"ãýòà, ñêàðûñòàéöå ìàéñòðà, äàñòóïíàãà âûøýé. Ó çàëåæíàñö³ àä \n"
-"êàíô³ãóðàöû³ æîðñòêàãà äûñêó, ìîãæà áûöü çðîáëåíà íàñòóïíàå:\n"
-"\n"
-"* Âûêàðûñòàííå ³ñíóþ÷àãà ðàçäçåëó: ìàéñòàð çíàéøî¢ àäç³í ö³ íåêàëüê³.\n"
-"³ñíóþ÷ûõ ðàçäçåëࢠíà âàøûì æîðñê³ì äûñêó. Êàë³ âû æàäàåöå ³õ çàõàâàöü,\n"
-"àáÿðûöå ãåòóþ îïöûþ.\n"
-"\n"
-"\n"
-"* Ïî¢íàÿ à÷ûñòêà äûñêó: àáÿðûöå ãýòà, êàë³ âû æàäàåöå âûäàë³öü óñåäàäçåíûÿ ³ "
-"ðàçäçåëû ÿê³ÿ ³ñíóþöü\n"
-" íà âàøûì äûñêó ³ çàìÿí³öü íà Mandrake Linux. Áóäçöå óâàæë³âû ç ãýòàéîïöûÿé, "
-"áî ãýòû ïðàöýñ íåçâàðîòíû.\n"
-"\n"
-"\n"
-"* Âûêàðûñòàííå âîëüíàé ïðàñòîðû íà ðàçäçåëå Windows: êàë³ MicrosoftWindows "
-"óñòàëÿâàíà íà âàøûì æîðñê³ì\n"
-" äûñêó ³ âûêàðûñòî¢âàå ¢ñþ äàñòóïíóþ ïðàñòîðó, âû ïàâ³ííû ñòâàðûöüâîëüíóþ "
-"ïðàñòîðó äëÿ äàäçåíûõ Linux\n"
-"Êàá çðàá³öü ãýòà, âû ìîæàöå âûäàëÿöü âàø ðàçäçåë Windows ³ äàäçåíûÿ(ãë."
-"\"À÷ûñòêà óñÿãî äûñêó\" àëüáî\n"
-" \"Ðýæûì ýêñïåðòó\") àëüáî çìÿí³öü ïàìåðû âàøàãà ðàçäçåëó WindowsÇìÿíåííå "
-"ïàìåðࢠìîæà áûöü âûêàíàíà\n"
-" áåç ñòðàòû äàäçåíûõ. Ãýòàÿ îïöûÿ ðýêàìåíäóåööà, êàë³ âû "
-"æàäàåöåâûêàðûñòî¢âàöü Mandrake Linux ³\n"
-" Microsoft Windows íà àäíûì ³ òûì æà  êàìï'þòýðû.\n"
-"\n"
-" Ïåðàä âûáàðàì ãýòàãà, êàë³ ëàñêà, çüâÿðí³öå ¢âàãó, íà òîå, øòîêîëüêàñüöü "
-"äàñòóïíàé âîëüíàé\n"
-" ïðàñòîðû ïàä Microsoft Windows çìåíøûööà.\n"
-"\n"
-"\n"
-"* Ðýæûì ýêñïåðòó: âû ìîæàöå àáðàöü ãýòóþ îïöûþ, êàë³ âû æàäàåöåðàçá³öü "
-"ðàçäçåëû óëàñíà ðóêàì³.\n"
-" Áóäçöå ¢âàæë³âûÿ àá³ðàþ÷û ãýòà. Ãýòàÿ îïöûÿ ìàãóòíàÿ àëå äàâîë³íåáÿñïå÷íàÿ, "
-"âû ìîæàöå\n"
-" ë¸ãêà çãóá³öü ñâàå äàäçåíûÿ. Òàìó íå àá³ðàéöå ãýòóþ îïöûþ êàë³ âûíå âåäàåöå "
-"øòî ðîá³öå."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Óñå ðàçäçåëû, ÿê³ÿ áûë³ òîëüê³ âûçíà÷àíû ïàâ³ííû áûöü\n"
-"àäôàðìàòàâàíû (ôàðìàòàâàöü - çíà÷ûöü ñòâàðûöü ôàéëàâàþ ñ³ñòýìó).\n"
-"\n"
-"\n"
-"Ó òîé æà ÷àñ, âû ìîæàöå ïåðàôàðìàòàâàöü óæî ³ñíóþ÷ûÿ ðàçäçåëû, êàá ñö¸ðö³\n"
-"äàäçåíûÿ ÿê³ÿ ÿíû ¢òðûìë³âàþöü. Êàë³ âû æàäàåöå çðàá³öü ãýòà, àáÿðûöå "
-"ðàçäçåëû\n"
-"ÿê³ÿ æàäàåöå àäôàðìàòàâàöü.\n"
-"\n"
-"\n"
-"Çà¢âàæöå, âû ïàâ³ííû ïåðàôàðìàòàâàöü óñå ñòâîðàíûÿ ðàçäçåëû. Âû ïàâ³ííû\n"
-"ïåðàôàðìàòàâàöü ðàçäçåëû, ÿê³ÿ ¢òðûìë³âàþöü àïåðàöûéíóþ ñ³ñòýìó (òûïó \"/"
-"\",\n"
-"\"/usr\" ö³ \"/var\"), àëå íå ïàâ³ííû ïåðàôàðìàòàâàöü ðàçäçåëû, ÿê³ÿ "
-"óòðûìë³âàþöü\n"
-"äàäçåíûÿ, ÿê³ÿ âû æàäàåöå çàõàâàöü (çâû÷àéíà /home).\n"
-"\n"
-"\n"
-"Êàë³ ëàñêà, áóäçöå ¢âàæë³âûÿ, àá³ðàþ÷û ðàçäçåëû, áî ïàñëÿ ôàðìàòàâàííÿ\n"
-"óñå äàäçåíûÿ áóäóöü íåçâàðîòíà âûäàëåíûÿ.\n"
-"\n"
-"\n"
-"Íàö³ñí³öå \"Òàê\" êàë³ âû ãàòîâûÿ ôàðìàòàâàöü ðàçäçåëÿ.\n"
-"\n"
-"\n"
-"Íàö³ñí³öå \"Àäìåíà\" êàë³ æàäàåöå àáðàöü ³íøûÿ ðàçäçåëû äëÿ "
-"óñòàëÿâàííÿâàøàé\n"
-"íîâàé àïåðàöûéíàé ñ³ñòýìû Mandrake Linux."
-
-#: ../../help.pm_.c:376
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Âàøà íîâàÿ àïåðàöûéíàÿ ñ³ñòýìà Mandrake Linux çàðàç óñòà븢âàåööà.\n"
-"Ãýòà àïåðàöûÿ àäûìå ïý¢íû ÷àñ(øòî çàëåæûöü àä ïàìåðó àáðàíàãà ¢ñòàëÿâàííÿ ³ "
-"õóòêàñö³\n"
-" êàìï'þòýðó) .\n"
-"\n"
-"\n"
-"Êàë³ ëàñêà, ïà÷àêàéöå."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:460
-#, fuzzy
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Íà âàøûì äûñêó áûëî çíîéäçåíà áîëåé çà àäç³í ðàçäçåë\n"
-"Windows. Êàë³ ëàñêà, àáÿðûöå òîé, ïàìåð ÿêîãà æàäàåöå çìÿí³öü, "
-"êàáóñòàëÿâàöü\n"
-"ñ³ñòýìó Mandrake Linux.\n"
-"\n"
-"\n"
-"Äëÿ iôàðìàöû³, êîæíû ðàçäçåë àäçíà÷àíû ÿê: \"Linux ³ìÿ\", \"Windows\n"
-"³ìÿ\" \"Câîéñòâû\".\n"
-"\"Linux ²ìÿ\" êàäàâàíà òàê - \"òûï äûñêó\", \"íóìàð äûñêó\",\"íóìàð "
-"ðàçäçåëó\n"
-"(íàïðûêëàä, \"hda1\").\n"
-"\n"
-"\n"
-"\"Òûï äûñêó\" êàäàâàíû ÿê \"hd\", êàë³ ãýòà IDE, ³ \"sd\" êàë³ SCSI.\n"
-"\n"
-"\"Íóìàð äûñêó\" - ñ³ìâàë ïàñëÿ \"hd\" ö³ \"sd\". Äëÿ IDE äûñêà¢:\n"
-"   * \"à\" \"master\" íà ïåðøàñíûì êàíàëå IDE \n"
-"   * \"b\" \"slave\" íà ïåðøàñíûì êàíàëå IDE\n"
-"   * \"c\" \"master\" íà äðóãàñíûì êàíàëå IDE\n"
-"   * \"d\" \"slave\" íà äðóãàñíûì êàíàëå IDE\n"
-"\n"
-"\n"
-"Äëÿ SCSI äûñêࢠ- \"a\" ãýòà \"ïåðøàñíû æîðñê³ äûñê\", \"b\" - \"äðóãàñíû "
-"æîðñê³ äûñê\", ³ ã.ä.\n"
-"\n"
-"\"Windows ²ìÿ\" ñ³ìâàë âàøàãà äûñêó ¢ Windows (ïåðøû äûñê ö³\n"
-"ðàçäçåë ïàçíà÷àåööà ÿê \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Êàë³ ëàñêà, ïà÷àêàéöå. Ãýòàÿ àïåðàöûÿ àäûìå ïý¢íû ÷àñ."
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Êàë³ ëàñêà, íàö³ñí³öå \"Óñòà븢êà\" êàë³ íå ìàåööà àí³ÿêàé ïàïÿðýäíÿéâåðñ³³ "
-"Mandrake Linux\n"
-"àëüáî âû æàäàåöå âûêàðûñòî¢âàöü íåêàëüê³ àïåðàöûéíûõ ñ³ñòýìà¢.\n"
-"\n"
-"\n"
-"Ó çàëåæíàñö³ àä âàøûõ âåäࢠGNU/Linux, âû ìîæûöå àáðàöü àäç³í ç íàñòóïíûõ "
-"êëàñà¢, êàá óñòà븢âàöü ³ ìàäûô³êàâàöü \n"
-"âàøóþ àïåðàöûéíóþ ñ³ñòýìó Mandrake Linux:\n"
-"\n"
-"* Ðýêàìåíäàâàíà: àáÿðûöå ãýòû êëàñ, êàë³ âû í³êîë³ íå ¢ñòà븢âàë³GNU/Linux. "
-"Óñòàëÿâàííå áóäçå âåëüì³ ïðîñòûì,\n"
-" âàì áóäçå çàäàíà òîëüê³ íåêàëüê³ ïûòàííÿ¢.\n"
-"\n"
-"\n"
-"* Ïà âûáàðó: êàë³ âû äàñòàòêîâà çíà¸ìûÿ ç GNU/Linux, âû ìîæàöå çðàá³öü âûáàð "
-"ì³æ âûêàðûñòàííåì ñ³ñòýìû ÿê Ïðàöî¢íàÿ\n"
-" ñòàíöûÿ, Ñåðâåð, Ðàñïðàöî¢êà. Âû ïàâ³ííû áóäçåöå àäêàçàöü íà áîëüøóþ "
-"êîëüêàñöü ïûòàííÿ¢ ÷ûì ïàä ÷àñ óñòàëÿâàííÿ\n"
-" êëàñó \"Ðýêàìýíäàâàíà\", òàìó âû ïàâ³ííû âåäàöü, ÿê ïðàöóå GNU/Linux, êàá "
-"àáðàöü ãýòû êëàñ óñòàëÿâàííÿ.\n"
-"\n"
-"\n"
-"* Ýêñïåðò: âû ìîæàöå àáðàöü ãýòû êëàñ, êàë³ âû ìàåöå äîáðûÿ âåäû ¢ GNU/"
-"Linux. ßê ³ ïðû ¢ñòàëÿâàíí³ êëàñó\n"
-" \"Íàñòðîåíà\", âû ìîæàöå çðàá³öü âûáàð ì³æ âûêàðûñòàííåì ñ³ñòýìû ÿê "
-"Ïðàöî¢íàÿ ñòàíöûÿ, Ñåðâåð,\n"
-" Ðàñïðàöî¢êà. Áóäçüöå âåëüì³ àñöÿðîæíûÿ ïåðàä òûì, ÿê àáðàöü ãýòû êëàñ "
-"óñòàëÿâàííÿ. Âû áóäçåöå çäîëüíûÿ âûêàíàöü óñòàëÿâàííå ¢\n"
-" àäïàâåäíàñö³ ç âàøûì³ æàäàííÿì³. Àäêàçû íà íåêàòîðûÿ ïûòàíí³ ìîãóöü áûöü "
-"âåëüì³ ñêëàäàíûì³, êàë³ âû íå ìàåöå äîáðûõ âåäࢠó GNU/Linux.\n"
-" Òàìó íå àá³ðàéöå ãýòû êëàñ ³íñòàëÿöû³, êàë³ âû íå âåäàåöå òîå, øòî ðîá³öå."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (àä LInux LOader) i Grub - ãýòà çàãðóç÷ûêi. ßíû ìîãóöü çàãðóçiöü "
-"äðóãóþ\n"
-"GNU/Linux öi ëþáóþ iíøóþ àïåðàöûéíóþ ñiñòýìó, óñòàëÿâàíóþ íà êàìïóòàðû.\n"
-"Çâû÷àéíà, ãýòûÿ iíøûÿ àïåðàöûéíûÿ ñiñòýìû êàðýêòíà âûçíà÷àþööà i\n"
-"¢ñòà븢âàþööà. Êàëi ãýòà íå àòðûìàëàñÿ, òî âû ìîæàöå äàäàöü ëþáû çàïiñ\n"
-"ñàìàñòîéíà. Áóäçüöå ¢ïý¢íåíû, øòî âû çàäàëi êàðýêòíûÿ ïàðàìåòðû.\n"
-"\n"
-"\n"
-"Òàêñàìà âû ìîæàöå ïàæàäàöü i íå äàáà¢ëÿöü iíøûÿ àïåðàöûéíûÿ ñiñòýìû.\n"
-"Ó òàêiì âûïàäêó ïàòðýáíà âûäàëiöü àäïàâåäíûÿ çàïiñû. Àëå æ òàäû âàì \n"
-"ïàòðýáíà áóäçå çàãðóçà÷íàÿ äûñêåòà, êàá çàãðóçiööà!"
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Íåàáõîäíà ïàçíà÷ûöü, äçå âû æàäàåöå ðàçìÿñöiöü iíôàðìàöûþ, ÿêàÿ íåàáõîäíà\n"
-"äëÿ çàãðóçêi Linux.\n"
-"\n"
-"\n"
-"Êàëi âû íå àä÷óâàåöå àáñàëþòíà äàêëàäíà, øòî âû ðîáiöå, \n"
-"àáÿðûöå \"Ïåðøû ñåêòàð íà äûñêó (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Àáÿðûöå æîðñê³ äûñê ÿê³ æàäàåöå à÷ûñö³öü äëÿ ¢ñòàëÿâàííÿ\n"
-"íîâàãà ðàçäçåëó Mandrake Linux. Áóäçöå ¢âàæë³âûÿ, óñå äàäçåíûÿ íà äûñêó "
-"áóäóöü\n"
-" çí³ø÷àíû ³ ³õ íåìàã÷ûìà áóäçå àäíàâ³öü."
-
-#: ../../help.pm_.c:832
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Íàö³ñí³öå \"Òàê\", êàë³ æàäàåöå âûäàë³öü óñå äàäçåíûÿ\n"
-"³ ðàçäçåëû íà ãýòûì äûñêó. Áóäçöå óâàæë³âûÿ, ïàñëÿ ãýòàé àïåðàöû³ âû íå\n"
-"\n"
-"çäîëååöå àäíàâ³öü ëþáûÿ äàäçåíûÿ ³ ðàçäçåëû, óë³÷âàþ÷û ³ äàäçåíûÿ Windows\n"
-"\n"
-"\n"
-"Íàö³ñí³öå \"Àäìåíà\" êàá àäìÿí³öü àïåðàöûþ áåç ñòðàòû äàäçåíûõ ³ ðàçäçåëà¢"
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Íåìàã÷ûìà âûêàðûñòî¢âàöü broadcast áåç äàìåíà NIS"
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Óñòà¢öå äûñêåòó ¢ äûñêàâîä %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Ïàìûëêà ÷ûòàííÿ ôàéëó %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Îê"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Ïý¢íàå àáñòàëÿâàííå ïàòðàáóå êàìåðöûéíûõ äðàéâåðࢠäëÿ ïðàöû.\n"
-"×àñòêîâà ³íôàðìàöûþ ïðà ³õ ìîæíà àòðûìàöü òóò: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Âû ïàâiííû ìåöü êàðàí¸âû ðàçäçåë.\n"
-"Äëÿ ãýòàãà ñòâàðûöå ðàçäçåë (àëüáî àäçíà÷öå ¢æî iñíóþ÷û).\n"
-"Ïîòûì àáÿðûöå ``Êðîïêà ìàíöiðàâàííÿ'' i ¢ñòàíàâiöå ÿå ¢ `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Âû ïàâiííû ìåöü ðàçäçåë swap"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Íÿìà ðàçäçåëà swap.\n"
-"\n"
-"Óñ¸ àäíî ïðàöÿãâàöü?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Âû ïàâiííû ìåöü ðàçäçåë swap"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Âûêàðûñòî¢âàöü íåçàíÿòóþ ïðàñòîðó"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Íå õàïàå ïðàñòîðû äëÿ ñòâàðýííÿ íîâûõ ðàçäçåëà¢"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Âûêàðûñòî¢âàöü iñíóþ÷û ðàçäçåë"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Íÿìà iñíóþ÷ûõ ðàçäçåëà¢, ÿêiÿ ìîæíà âûêàðûñòàöü"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Âûêàðûñòî¢âàöü ðàçäçåë Windows äëÿ âiðòóàëüíàé ôàéëàâàé ñiñòýìû"
-
-#: ../../install_interactive.pm_.c:98
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Ïàìåðû ÿêîãà ðàçäçåëà âû æàäàåöå çìÿíiöü?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Âûáàð ïàìåðà¢"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Êàðàí¸âû ðàçäçåë ¢ Má: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Ïàìåð swap ðàçäçåëó ¢ Má:"
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Âûêàðûñòî¢âàöü íåçàíÿòóþ ïðàñòîðó íà ðàçäçåëå Windows"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Ïàìåðû ÿêîãà ðàçäçåëà âû æàäàåöå çìÿíiöü?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Âûëi÷ýííå ìåæࢠôàéëàâàé ñiñòýìû Windows"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Ó ïðàãðàìû çìåíû ïàìåðࢠðàçäçåëà FAT íå àòðûìàëàñÿ\n"
-"àïðàöàâàöü Âàø ðàçäçåë, ïàìûëêà: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Âàø ðàçäçåë ç Windows çàíàäòà ôðàãìåíòàâàíû. \n"
-"Ðýêàìåíäóåì ñïà÷àòêó çàïóñöiöü ïðàãðàìó ``defrag''"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ÓÂÀÃÀ!\n"
-"\n"
-"DrakX çàðàç ïàâiíåí çìÿíiöü ïàìåð âàøàãà ðàçäçåëà Windows.\n"
-"Áóäçüöå ¢âàæëiâû: ãýòàÿ àïåðàöûÿ íåáÿñïå÷íà. Êàëi âû  ÿø÷ý íå çðàáiëi \n"
-"ðýçåðâîâóþ êîïiþ äàäçåíûõ, òî ñïà÷àòêó ïàêiíüöå ïðàãðàìó ¢ñòàëÿâàííÿ,"
-"âûêàíàéöå scandisk i defrag íà ãýòûì ðàçäåëå, çðàáiöå ðýçåðâîâóþ êîïiþ\n"
-"äàäçåíûõ i òîëüêi ïîòûì çíî¢ âÿðíiöåñÿ äà ïðàãðàìû ¢ñòàëÿâàííÿ.\n"
-"Êàëi ïàäðûõòàâàëiñÿ, íàöiñíiöå Ok."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "ßêóþ ïðàñòîðó çàõàâàöü äëÿ Windows?"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "Ðàçäçåë %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "À¢òàçìÿíåííå ïàìåðࢠíå àòðûìàëàñÿ äëÿ ðàçäçåëó FAT %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Íå çíîéäçåíà ðàçäçåëࢠFAT äëÿ çìÿíåííÿ ïàìåðࢠàëüáî âûêàðûñòàííÿ\n"
-"¢ ÿêàñöi âiðòóàëüíàé ôàéëàâàé ñiñòýìû (öi íåäàñòàòêîâà ïðàñòîðû íà äûñêó)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Ñö¸ðöi äàäçåíûÿ íà ¢ñiì äûñêó"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Âûäàëiöü Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Íà ÿêi ç ìàþ÷ûõñÿ æîðñòêiõ äûñêࢠÂû æàäàåöå ¢ñòàëÿâàöü Linux?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Óñå iñíóþ÷ûÿ ðàçäçåëû íà äûñêó %s i äàäçåíûÿ íà iõ áóäóöü ñòðà÷àíû"
-
-#: ../../install_interactive.pm_.c:174
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "Âûêàðûñòî¢âàöü iñíóþ÷û ðàçäçåë"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Âûêàðûñòî¢âàöü fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Âû ìîæàöå öÿïåð ðàçáiöü âàø äûñê %s\n"
-"Ïà çàêàí÷ýííi íå çàáóäçüöåñÿ çàõàâàöü çìÿíåííi, ñêàðûñòà¢øû `w'"
-
-#: ../../install_interactive.pm_.c:210
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Âûêàðûñòî¢âàöü íåçàíÿòóþ ïðàñòîðó íà ðàçäçåëå Windows"
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Äàäàöü ðàçäçåë íåìàã÷ûìà"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Ìàéñòàð ïàäðûõòî¢êi ðàçäçåëࢠDrakX çíàéøî¢ íàñòóïíûÿ âàðûÿíòû:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ïàäðûõòî¢êà ðàçäåëࢠíå ¢äàëàñÿ: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Äàëó÷ýííå äà ñåòêi"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Àäëó÷ýííå àä ñåòêi"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Óçíiêëà ïàìûëêà, ÿêóþ íå àòðûìë³âàåööà êàðýêòíà àïðàöàâàöü,\n"
-"òàìó ïðàöÿãâàéöå íà ñâàþ ðûçûêó."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Äóáëÿâàííå ïóíêòó ìàíöiðàâàííÿ %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Íåêàòîðûÿ âàæíûÿ ïàêåòû íå áûëi ¢ñòàëÿâàíû êàðýêòíà.\n"
-"Äðóãi âàø cdrom äûñê öi âàø cdrom ìàþöü äýôåêòû.\n"
-"Ïðàâåðöå cdrom íà âàøûì êàìïóòàðû, âûêàðûñòî¢âàþ÷û\"rpm -qpl Mandrake/RPMS/*."
-"rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Сард�чна запрашаем у %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Äûñêàâîä íåäàñòóïíû"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Ïåðàõîä íà êðîê `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Àáÿðûöå ïàæàäàíû ïàìåð óñòàëÿâàííÿ"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Àãóëüíû ïàìåð: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Âåðñiÿ: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Ïàìåð: %d Ká\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Âûáàð ïàêåòࢠäëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Iíôàðìàöûÿ"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Óñòà븢êà"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Óñòà븢âàåì"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Ïà÷àêàéöå, êàëi ëàñêà, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Çàñòàëîñÿ ÷àñó "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Àãóëüíû ÷àñ "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Ïàäðûõòî¢êà ¢ñòàëÿâàíüíÿ"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Óñòàëÿâàííå ïàêåòó %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Óñ¸ ðî¢íà ïðàöÿãâàöü?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Àòðûìàëàñÿ ïàìûëêà ¢ïàðàäêàâàííÿ ïàêåòà¢:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Âûêàðûñòàöü iñíóþ÷óþ íàñòðîéêó äëÿ X11?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Ó Âàøàé ñiñòýìå ìàåööà íåäàõîï ðýñóðñà¢, òàìó ìàã÷ûìû ïðàáëåìû\n"
-"ïðû ¢ñòàëÿâàííi Mandrake Linux. Ó ãýòûì âûïàäêó ïàñïðàáóéöå òýêñòàâóþ\n"
-"ïðàãðàìó ¢ñòàëÿâàííÿ. Äëÿ ãýòàãà íàöiñíiöå `F1' ó ÷àñ çàãðóçêi, à ïîòûì\n"
-"íàáÿðûöå `text' i íàöiñíiöå <ENTER>."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Êëàñ Óñòàëÿâàííÿ"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Êàëi ëàñêà, àáÿðûöå àäçií ç êëàñࢠóñòàëÿâàííÿ:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Àãóëüíû ïàìåð äëÿ àáðàíûõ ãðóïࢠïðûáëiçíà ðî¢íû %d Ìá.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Êàëi âû æàäàåöå ¢ñòàëÿâàöü ìåíåé ãýòàãó ïàìåðó,\n"
-"àáÿðûöå àäñîòàê ïàêåòà¢, ÿêi âû æàäàåöå ¢ñòàëÿâàöü.\n"
-"\n"
-"Ïðû íiçêiì àäñîòêó áóäóöü óñòàëÿâàíû òîëüêi íàéáîëüø âàæíûÿ ïàêåòû,\n"
-"à ïðû 100% áóäóöü óñòàëÿâàíû ¢ñå àáðàíûÿ ïàêåòû."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Íà âàøûì äûñêó ¸ñöü ìåñöà òîëüêi äëÿ %d%% ãýòûõ ïàêåòà¢.\n"
-"\n"
-"Êàëi âû æàäàåöå ¢ñòàëÿâàöü ìåíåé ãýòàãà, òî\n"
-"ïàçíà÷öå àäñîòàê ïàêåòࢠäëÿ ¢ñòàëÿâàííÿ.\n"
-"Ïðû ìàëûì àäñîòêó áóäóöü óñòàëÿâàíû íàéáîëüø âàæíûÿ ïàêåòû;\n"
-"ïðû àäñîòêó %d%% áóäçå ¢ñòàëÿâàíà ñòîëüêi ïàêåòࢠêîëüêi ìàã÷ûìà."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Áîëüø äàêëàäíû âûáàð ìîæíà áóäçå çðàáiöü íà íàñòóïíûì êðîêó."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Àäñîòàê ïàêåòࢠäëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Âûáàð ãðóïû ïàêåòà¢"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Àñàáiñòû âûáàð ïàêåòà¢"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Àãóëüíû ïàìåð: %d / %d Má"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Äðýííû ïàêåò"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Iìÿ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Çíà÷íàñöü: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Âû íå ìîæàöå âûáðàöü ãýòû ïàêåò, òàìó ÿê íå õàïàå ìåñöà äëÿ ÿãî ¢ñòàëÿâàííÿ"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Íàñòóïíûÿ ïàêåòû áóäóöü äàäàíû äà ñiñòýìû"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Íàñòóïíûÿ ïàêåòû áóäóöü âûäàëåíû"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Âû íå ìîæàöå âûëó÷àöü ³ àäìÿíÿöü âûëó÷ýííå ãýòàãà ïàêåòó"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ãýòà àáàâÿçêîâû ïàêåò, ÿãî âûëó÷ýííå íåëüãà àäìÿíiöü"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Âû íå ìîæàöå àäìÿíiöü âûëó÷ýííå ãýòàãà ïàêåòó. ¨í óæî ¢ñòàëÿâàíû"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ãýòû ïàêåò ïàâiíåí áûöü àáíî¢ëåíû\n"
-"Âû ¢ïý¢íåíû, øòî õî÷àöå àäìÿíiöü âûëó÷ýííå?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Âû íå ìîæàöå àäìÿíiöü âûëó÷ýííå ãýòàãà ïàêåòó. ßãî ïàòðýáíà àáíàâiöü"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:460
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Çàõàâàííå íà äûñêåòó"
-
-#: ../../install_steps_gtk.pm_.c:461
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Àñàáiñòû âûáàð ïàêåòà¢"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Minimal install"
-msgstr "Âûäàëiöü ç ñiñòýìû"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "×àêàåööà"
-
-#: ../../install_steps_gtk.pm_.c:522
-#, fuzzy
-msgid "Please wait, preparing installation"
-msgstr "Ïàäðûõòî¢êà ¢ñòàëÿâàíüíÿ"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d ïàêåòà¢"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Ïðûíÿöü"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Àäêàçàöü"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Çìÿíiöå âàø Cd-Rom!\n"
-"\n"
-"Êàëi ëàñêà, óñòà¢öå Cd-Rom, ïàçíà÷àíû \"%s\", ó âàø äûñêàâîä i íàöiñíiöå Oê "
-"ïàñëÿ.\n"
-"Êàëi âû íå ìàåöå ÿãî, íàöiñíiöå Àäìÿíiöü, êàá àäìÿíiöü óñòàëÿâàííå ç ãýòàãà "
-"Cd."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Àòðûìàëàñÿ ïàìûëêà ¢ïàðàäêàâàííÿ ïàêåòà¢:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Àäáûëàñÿ ïàìûëêà"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "˳öýíç³éíàÿ äàìîâà"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Êëàâiÿòóðà"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Êàëi ëàñêà, àáÿðûöå òûï êëàâiÿòóðû."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "ßêi êëàñ óñòàëÿâàííÿ âû æàäàåöå?"
-
-#: ../../install_steps_interactive.pm_.c:189
-#, fuzzy
-msgid "Install/Update"
-msgstr "Óñòà븢êà"
-
-#: ../../install_steps_interactive.pm_.c:189
-#, fuzzy
-msgid "Is this an install or an update?"
-msgstr "Àáÿðûöå ¢ñòàëÿâàííå öi àáíà¢ëåííå"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Ðýêàìåíäàâàíà"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Ýêñïåðò"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "êàëi ëàñêà, ïàçíà÷öå òûï âàøàé ìûøû."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Ïîðò ìûøû"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Êàëi ëàñêà, ïàçíà÷öå ïîñëÿäî¢íû ïîðò, äà ÿêîãà ïàäêëþ÷àíà âàøàÿ ìûø."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Íàñòðîéêà êàðò PCMCIA ..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Íàñòðîéêà IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "íÿìà äàñòóïíûõ ðàçäçåëà¢"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Àáÿðûöå ïóíêòû ìàíöiðàâàííÿ"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Òàáëiöà ðàçäçåëࢠíå ÷ûòàåööà, ÿíà çàíàäòà ñàïñàâàíàÿ äëÿ ìåíÿ :(\n"
-"Ïàñïðàáóþ iñöi äàëåé i áóäó ïðàïóñêàöü äðýííûÿ ðàçäçåëû (Óñå ÄÀÄÅÇÅÍÛß\n"
-"áóäóöü ñòðà÷àíû!). Iíøàå ðàøýííå íå äàçâîëiöü DrakX çìÿíiöü òàáëiöó "
-"ðàçäçåëà¢.\n"
-"(ïàìûëêà ¢ %s)\n"
-"\n"
-"Öi æàäàåöå ñòðàöiöü óñå ðàçäçåëû?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake íå çìîã ïðàâiëüíà ïðà÷ûòàöü òàáëiöó ðàäçåëà¢.\n"
-"Ïðàöÿãâàéöå òîëüêi íà ñâàþ ðûçûêó!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:349
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Êàðàí¸âû ðàçäçåë íå çíîéäçåíû"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Êàðàí¸âû ðàçäçåë"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "ßêi ðàäçåë êàðàí¸âû (/) äëÿ âàøàé ñiñòýìû?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Êàá ìàäûôiêàöûÿ òàáëiöû ðàçäçåëࢠçäåéñíiëàñÿ, ïàòðýáíà ïåðàçàãðóçêà."
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Âûáàð ðàçäçåëࢠäëÿ ôàðìàòàâàííÿ"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Ïðàâåðûöü íà íàÿ¢íàñöü äðýííûõ áëîêà¢?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Ôàðìàòàâàííÿ ðàçäçåëà¢"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Ñòâàðýííå i ôàðìàòàâàííå ôàéëà %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Íå õàïàå ìåñöà ¢ áóôåðû ïàäêà÷êi (swap) äëÿ ¢ñòàëÿâàííÿ, ïàâÿëi÷öå ÿãî."
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Ïðàãëÿä äàñòóïíûõ ïàêåòà¢"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Ïîøóê ïàêåòࢠäëÿ àáíà¢ëåííÿ"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Âàøà ñiñòýìà íå ìàå äàñòàêîâà ìåñöà äëÿ ¢ñòàëÿâàííÿ öi àáíà¢ëåííÿ (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Ïî¢íû (%dMá)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Ìiíiìàëüíû (%dMá)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Ðýêàìåíäàâàíà (%dÌá)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Ïà âûáàðó"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:525
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Àäíà¢ëåííå ç äûñêåòû"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Àäíà¢ëåííå ç äûñêåòû"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Package selection"
-msgstr "Âûáàð ãðóïû ïàêåòà¢"
-
-#: ../../install_steps_interactive.pm_.c:532
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Óñòà¢öå äûñêåòó ¢ äûñêàâîä %s"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Çàõàâàííå íà äûñêåòó"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Êàëi âû ìàåöå ¢ñå CD äûñêi ñà ñïiñà íiæýé, íàöiñíiöå Îê.\n"
-"Êàëi âû íå ìàåöå àíi âîäíàãà ç ãýòûõ CD äûñêà¢, íàöiñíiöå Àäìÿíiöü.\n"
-"Êàëi íåêàòîðûõ ç CD äûñêࢠíå ìàåöå, àäìÿíiöå iõ âûäçÿëåííå i íàöiñíiöå Îê."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ïàçíà÷àíû \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Óñòàëÿâàííå ïàêåòó %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Íàñòðîéêà ïàñëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Óñòà¢öå äûñêåòó ¢ äûñêàâîä %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Óñòà¢öå äûñêåòó ¢ äûñêàâîä %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Çàðàç âû ìàåöå ìàã÷ûìàñöü çàãðóçiöü ïðàãðàìû äëÿ øûôðàâàííÿ.\n"
-"\n"
-"ÓÂÀÃÀ:\n"
-"\n"
-"Ç-çà àãóëüíûõ àáìåæàâàííÿ¢ íà ïðàãðàìû ãýòêàãà ðîäó i ðîçíûõ ïàíÿööÿ¢\n"
-"ó ðîçíûõ çàêîíàäà¢ñòâàõ, ïðàäàâåö i/àëüáî êàðûñòàëüíiê ãýòûõ ïðàãðàì "
-"ïàâiíåí\n"
-"óïý¢íiööà ¢ òûì, øòî çàêîíû ÿãî/iõ äçÿðæàâࢠäàçâàëÿþöü çàãðóæàöü, "
-"çàõî¢âàöü\n"
-"i/àëüáî âûêàðûñòî¢âàöü ãýòûÿ ïðàãðàìû.\n"
-"\n"
-"Àêðàìÿ òàãî, ïðàäàâåö i/àëüáî êàðûñòàëüíiê ïàâiííû áûöü óïý¢íåíû, øòî íå "
-"ïàðóøàþöü\n"
-"çàêîíࢠñâà¸é êðàiíû. Êàëi ïðàäàâåö i/àëüáî êàðûñòàëüíiê ïàðóøàå ãýòûÿ\n"
-"çàêîíû, ÿêiÿ ìîãóöü áûöü ñêàðûñòàíûÿ ñóïðàöü ÿãî, ¸í/ÿíû íÿñå àäêàçíàñöü\n"
-"\n"
-"Íi ¢ ÿêiì ðàçå íi Mandrakesoft, íi ÿå âûêàíà¢öû i ïàñòà¢ø÷ûêi íå àäêàçâàþöü\n"
-"çà íåïàñðýäíóþ, íåïðàìóþ àëüáî âûïàäêîâóþ øêîäó (øòî óêëþ÷àå, àëå \n"
-"íå àáìÿæî¢âàåööà ñòðà÷àíûì³ ïðûáûòêàì, ïàðóøýííå áiçíýñó, ñòðàòàé "
-"êàìåðöûéíûõ \n"
-"äàäçåíûõ i iíøûìi ñòðàòàìi, à òàêñàìà ìàã÷ûìûìi ñàíêöûÿìi i øòðàôàìi, ÿêiÿ \n"
-"íàëåæûöü âûïëàöiöü ïà ïàñòàíîâå ñóäó), ÿêiÿ âûöÿêàþöü ç êàðûñòàííÿ, \n"
-"âàëîäàííÿ, àëüáî ïðîñòà çàãðóçêi ç ñåòêi ïðàãðàì, äà ÿêiõ ïðàäàâåö àëüáî\n"
-"êàðûñòàëüíiê àòðûìàëi äîñòóï ïàñëÿ ïàäïiñàííÿ ãýòàãà ïàãàäíåííÿ.\n"
-"\n"
-"Ãýòàå ïàãàäíåííå ¢ ïåðøóþ ÷àðãó àäêàçâàå çàêîíàäà¢ñòâó Ôðàíöûi, çà "
-"âûêëþ÷ýííåì\n"
-"âûïàäêà¢, ÿêiÿ ñïåöûÿëüíà ðýãëàìåíòóþööà ìÿñöîâûì çàêîíàäà¢ñòâàì ó ìåæàõ\n"
-"ãðàìàäçÿíñêàãà ïðàâà. Àäíàê äàäçåíàå ïàãàäíåííå êàòýãàðû÷íà àáâÿðãàå ëþáûÿ\n"
-"íåñóàäíîñiíû çàêîíàäà¢ñòâà¢, ïðûíöûïà¢, àëüáî ïðûìÿíåííå àä ïðîöiëåãëàãà.\n"
-"Òàêiì ÷ûíàì, çàêîíû Ôðàíöûi áóäóöü ïðýâàëiðàâàöü íàä ëþáûìi iíøûìi "
-"ìÿñöîâûìi\n"
-"çàêîíàìi.\n"
-"\n"
-"Ç ëþáûìi ïûòàííÿìi, ÿêiÿ äàòû÷àööà äàäçåííàãà ïàãàäíåííÿ, çâÿðòàéöåñÿ: \n"
-"Mandrakesoft\n"
-"43, rue d'Aboukir\n"
-"75002 Paris\n"
-"FRANCE"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Âûáàð ëþñòðà äëÿ àòðûìàííÿ ïàêåòà¢"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Ñóâÿçü ç ëþðàì äëÿ àòðûìàííÿ ñïiñó äàñòóïíûõ ïàêåòà¢"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Âûáàð ïàêåòࢠäëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "ßêi âàø ÷àñàâû ïîÿñ?"
-
-#: ../../install_steps_interactive.pm_.c:813
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Âàø ñiñòýìíû ãàäçiííiê óñòàëÿâàíû íà GMT?"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:821
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS ñåðâåð:"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Àääàëåíû ñåðâåð CUPS"
-
-#: ../../install_steps_interactive.pm_.c:856
-#, fuzzy
-msgid "No printer"
-msgstr "Iìÿ äðóêàðêi"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:870
-#, fuzzy
-msgid "Mouse"
-msgstr "Ïîðò ìûøû"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Ïðûíòýð"
-
-#: ../../install_steps_interactive.pm_.c:875
-#, fuzzy
-msgid "ISDN card"
-msgstr "Óíóòðàíàÿ ISDN êàðòà"
-
-#: ../../install_steps_interactive.pm_.c:878
-#, fuzzy
-msgid "Sound card"
-msgstr "Ñòàíäàðòíû"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-#, fuzzy
-msgid "NIS"
-msgstr "Âûêàðûñòî¢âàöü NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-#, fuzzy
-msgid "Local files"
-msgstr "Ëàêàëüíû ïðûíòýð"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Ïàðîëü äëÿ root"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Íÿìà ïàðîëþ"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Ãýòû ïàðîëü çàíàäòà ïðîñòû (ÿãî äà¢æûíÿ ïàâiííà áûöü íå ìåíåé çà %d ëiòàðà¢)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "À¢òýíòûôiêàöûÿ"
-
-#: ../../install_steps_interactive.pm_.c:949
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "À¢òýíòûôiêàöûÿ"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:951
-#, fuzzy
-msgid "LDAP Server"
-msgstr "ñåðâåð"
-
-#: ../../install_steps_interactive.pm_.c:957
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "À¢òýíòûôiêàöûÿ NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS Domain"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS ñåðâåð:"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Ç äàïàìîãàé çàãðóçà÷íàãà äûñêà âû çìîæàöå çàãðóæàöü Linux íåçàëåæíà àä\n"
-" ñòàíäàðòíàãà çàãðóç÷ûêà. Ãýòà ìîæà áûöü ÿêàñíà, êàëi âû íå æàäàåöå \n"
-"¢ñòà븢âàöü SILO, êàëi iíøàÿ àïåðàöûéíàÿ ñiñòýìà âûäàëÿå SILO, öi SILO íå \n"
-"ìîæà ïðàöàâàöü ó âàøàé êàíôiãóðàöûi. Çàãðóçà÷íû äûñê òàêñàìà ìîæà áûöü \n"
-"âûêàðûñòàí ñóìåñíà ç âûðàòàâàëüíàé äûñêåòàé Mandrake Linux, ÿêàÿ âåëüìi \n"
-"ïàëåã÷ûöü âûðàòàâàííå ñiñòýìû ïàñëÿ çáîþ.\n"
-"\n"
-"Êàëi æàäàåöå ñòâàðûöü çàãðóçà÷íû äûñê çàðàç, óñòà¢öå äûñêåòó ¢ ïåðøû\n"
-"äûñêàâîä i íàöiñíiöå \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Ïåðøû äûñêàâîä"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Äðóãi äûñêàâîä"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Ïðàïóñöiöü"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Ç äàïàìîãàé çàãðóçà÷íàãà äûñêó âû çìîæàöå çàãðóæàöü Linux òàêñàìà ÿê i \n"
-"ñòàíäàðòíûì çàãðóç÷ûêàì. Ãýòà ìîæà áûöü ÿêàñíà, êàëi âû íå æàäàåöå \n"
-"¢ñòà븢âàöü LILO (öi Grub), êàëi iíøàÿ àïåðàöûéíàÿ ñiñòýìà âûäàëÿå LILO,\n"
-"öi LILO íå ìîæà ïðàöàâàöü ó âàøàé êàíôiãóðàöûi. Çàãðóçà÷íû äûñê òàêñàìà "
-"ìîæà\n"
-"áûöü âûêàðûñòàíû ñóìåñíà ç ðàìîíòíàé äûñêåòàé Mandrake Linux, ÿêàÿ âåëüìi \n"
-"ïàëåã÷ûöü âûðàòàâàííå ñiñòýìû ïàñëÿ çáîþ.\n"
-"\n"
-"Æàäàåöå ñòâàðûöü çàãðóçà÷íû äûñê çàðàç?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Âûáà÷àéöå, àëå äûñêàâîä íåäàñòóïíû"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Àáÿðûöå äûñêàâîä, ó ÿêiì áóäçå ñòâàðàööà çàãðóçà÷íàÿ äûñêåòà"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Óñòà¢öå äûñêåòó ¢ äûñêàâîä %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Ñòâàðýííå çàãðóçà÷íàé äûñêåòû"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Ïàäðûõòî¢êà çàãðóç÷ûêà"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Âû æàäàåöå âûêàðûñòî¢âàöü aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Ïàìûëêà ¢ñòàëÿâàííÿ àboot, \n"
-"ñïðàáàâàöü óñòà븢âàöü, íåãëåäçÿ÷û íà ìàã÷ûìàñöü ïàðóøýííÿ ïåðøàãà ðàçäåëó?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Óñòàëÿâàííå çàãðóç÷ûêó"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Ïðàöýñ óñòàëÿâàííÿ çàãðóç÷ûêà íå àòðûìà¢ñÿ. Óçíiêëà íàñòóïíàÿ ïàìûëêà:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Ñëàáû"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Ñÿðýäíi"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Âûñîêi"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Óçðîâåíü áÿñïåêi"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Óñòà¢öå äûñêåòó ¢ äûñêàâîä %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Ñòâàðýííå äûñêåòû äëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Íåêàòîðûÿ êðîêi íå çàâåðøàíû.\n"
-"Âû ñàïðà¢äû æàäàåöå âûéñöi çàðàç?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Âiíøóåì, óñòàëÿâàííå çàâåðøàíà.\n"
-"Âûäàëiöå çàãðóçà÷íû äûñê i íàöiñíiöå enter äëÿ ïåðàçàãðóçêi.\n"
-"Çà iíôàðìàöûÿé ïðà çìÿíåííi äàäçåíàãà âûïóñêó Mandrake Linux,\n"
-"çâÿðòàéöåñü íà http://www.mandrakelinux.com/.\n"
-"Iíôàðìàöûÿ ïà íàñòðîéêå âàøàé ñiñòýìû ¸ñòü ¢ ïàñëÿ-¢ñòàë¸âà÷íàé\n"
-"ãëàâå âàøàãà Äàïàìîæíiêà Êàðûñòàëüíiêó ç Àôiöûéíàãà Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1172
-#, fuzzy
-msgid "Generate auto install floppy"
-msgstr "Ñòâàðýííå äûñêåòû äëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "À¢òàìàòû÷íû"
-
-#: ../../install_steps_interactive.pm_.c:1179
-#, fuzzy
-msgid "Replay"
-msgstr "Ïåðàçàãðóçiöü"
-
-#: ../../install_steps_interactive.pm_.c:1182
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Àñàáiñòû âûáàð ïàêåòà¢"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Óñòàëÿâàííå Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> ïàìiæ ýëåìåíòàìi  |  <Space> âûáàð  | <F12> íàñòóïíû ýêðàí "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "Àáÿðûöå äçåÿííå"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Êàëi ëàñêà, ïà÷àêàéöå"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Ðàçãàðíóöü äðýâà"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Çãàðíóöü äðýâà"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Ïåðàêëþ÷ýííå ïàìiæ óïàðàäêàâàííåì ïà ãðóïå i àñîáêàõ"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Íåâûçíà÷àíàñöü (%s), áóäçüöå äàêëàäíûÿ\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Äðýííû âûáàð, ïàñïðàáóéöå ÿø÷å\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (çìî¢÷àííå %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Âàø âûáàð? (çìî¢÷àííå %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Âàø âûáàð? (çìî¢÷àííå %s. Óâÿäçiöå `none' ïðû àäñóòíàñöi) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "×åøñêi (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Íÿìåöêi"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Iñïàíñêi"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Ôiíñêi"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Ôðàíöóçñêi"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Íàðâåæñêi"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Ïîëüñêi"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Ðóñêi"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Øâåöêi"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "UK êëàâiÿòóðà"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "US êëàâiÿòóðà"
-
-#: ../../keyboard.pm_.c:159
-#, fuzzy
-msgid "Albanian"
-msgstr "Iðàíñêi"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Àðìÿíñêi (ñòàðû)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Àðìÿíñêi (typewriter)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Àðìÿíñêi (ôàíåòû÷íû)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Àçåðáàéäæàíñê³ (latin)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Áåëüãiéñêi"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Áàëãàðñêi"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Áðàçiëüñêi (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Áåëàðóñê³"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Øâåéöàðñêi (Íÿìåöêàÿ ðàñêëàäêà)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Øâåéöàðñêi (Ôðàíöóçñêàÿ ðàñêëàäêà)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "×åøñêi (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Íÿìåöêi (íÿìà çàáëàêiðàâàíûõ êëàâiø)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Äàöêi"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Íàðâåæñêi)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Ýñòîíñêi"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Ãðóçiíñêi (\"Ðóñêàÿ\" ðàñêëàäêà)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Ãðóçiíñêi (\"Ëàöiíñêàÿ\" ðàñêëàäêà)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Ãðý÷àñêi"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Ìàäüÿðñêi"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Õàðâàöêi"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "I¢ðûò"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "I¢ðûò (ôàíåòû÷íû)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iðàíñêi"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Iñëàíäñêi"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Iòàëüÿíñêi"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "ßïîíñêi 106 êëàâiø"
-
-#: ../../keyboard.pm_.c:201
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "UK êëàâiÿòóðà"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Ëàöiíà-Àìåðûêàíñêi"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Ëiòî¢ñêi AZERTY (ñòàðû)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Ëiòî¢ñêi AZERTY (íîâû)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Ëiòî¢ñêi \"íóìàð ðàäêà\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Ëiòî¢ñêi \"ôàíåòû÷íû\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "Ðàçìåðêàâàííå"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Ãàëàíäñêi"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Ïîëüñêi (ñòàíäàðòíàÿ ðàñêëàäêà)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Ïîëüñêi (qwertz ðàñêëàäêà)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Ïàðòóãàëüñêi"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Êàíàäñêi (Êâåáýê)"
-
-#: ../../keyboard.pm_.c:217
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Ðóñêi (ß-Â-Å-Ð-Ò-È)"
-
-#: ../../keyboard.pm_.c:218
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Ðóñêi (ß-Â-Å-Ð-Ò-È)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Ðóñêi (ß-Â-Å-Ð-Ò-È)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Ñëàâåíñêi"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Ñëàâàöêi (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Ñëàâàöêi (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Àçåðáàéäæàíñê³ (ê³ðûë³öà)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Òàéñêàÿ êëàâiÿòóðà"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Òàéñêàÿ êëàâiÿòóðà"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Òóðýöêi (òðàäûöû¸íàÿ \"F\" ìàäýëü)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Òóðýöêi (ñó÷àñíàÿ \"Q\" ìàäýëü)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Óêðàiíñêi"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "US êëàâiÿòóðà (ìiæíàðîäíàÿ)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Âüåòíàìñêi \"íóìàð ðàäêà\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Àçåðáàéäæàíñê³ (latin)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Ìàíöiðàâàííå äûñêó %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Ìûø"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Ñòàíäàðòíû"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-#, fuzzy
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Çâû÷àéíàÿ ìûø ç 2 êíîïêàì³"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-#, fuzzy
-msgid "1 button"
-msgstr "2 êíîïêi"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Àãóëüíû"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Ç êîëàì"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "ïàñëÿäî¢íàÿ"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Çâû÷àéíàÿ ìûø ç 2 êíîïêàì³"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Çâû÷àéíàÿ ìûø ç 3 êíîïêàì³"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (ïàñëÿäî¢íàÿ, ñòàðû òûï C7)"
-
-#: ../../mouse.pm_.c:65
-#, fuzzy
-msgid "busmouse"
-msgstr "Íÿìà ìûøû"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 êíîïêi"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 êíîïêi"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "íÿìà"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Íÿìà ìûøû"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Êàë³ ëàñêà, çðàá³öå íåêàëüê³ ðóõࢠìûøøó."
-
-#: ../../mouse.pm_.c:483
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "Êàë³ ëàñêà, çðàá³öå íåêàëüê³ ðóõࢠìûøøó."
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "Ðóøöå êîëàì ìûøû!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:415
-#, fuzzy
-msgid "Finish"
-msgstr "Ôiíñêi"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Äàëåé ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Ãýòà äàêëàäíà?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Äàëó÷ýííå äà Iíòýðíýòó"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "âûêàðûñòî¢âàöü pppoe"
-
-#: ../../network/adsl.pm_.c:22
-#, fuzzy
-msgid "use pptp"
-msgstr "âûêàðûñòî¢âàöü pppoe"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"ßêi dhcp êëiåíò âû ïëàíóåöå âûêàðûñòî¢âàöü?\n"
-"Ïà çìî¢÷àííþ, ãýòà dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-#, fuzzy
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Íi âîäíû ethernet ñåòêàâû àäàïòàð ó âàøàé ñiñòýìå íå âûçíà÷àíû. Êàëi ëàñêà, "
-"ñêàðûñòàéöå êàíôiãóðàöûéíû iíñòðóìýíò."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Ïàçíà÷öå ñåòêàâû iíòýðôåéñ"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Êàëi ëàñêà, ïàçíà÷öå ñåòêàâû àäàïòàð, ÿêi ïëàíóåöå âûêàðûñòî¢âàöü äëÿ "
-"äàëó÷ýííÿ äà iíòýðíýò"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ñåòêàâàÿ êàðòà íå çíîéäçåíà"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Íàñòðîéêà ñåòêi"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Óâÿäçiöå iìÿ ñâà¸é ìàøûíû (host).\n"
-"Iìÿ âàøàé ìàøûíû ïàâiííà áûöü çàäàäçåíà ïî¢íàñöþ,\n"
-"íàïðûêëàä ``mybox.mylab.myco.com''.\n"
-"Âû ìîæàöå òàêñàìà ¢âåñöi IP àäðàñ øëþçó, êàëi ¸í ó âàñ ¸ñöü."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Iìÿ ìàøûíû"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "Êàíôiãóðàöûÿ ñåòêi"
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "Óíóòðàíàÿ ISDN êàðòà"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Óíóòðàíàÿ ISDN êàðòà"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "ßêi òûï âàøàãà ISDN çëó÷ýííÿ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Çíîéäçåíà ñ³ñòýìà ñåòêàâàé áÿñïåê³ (firewall)!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Çíîéäçåíà ñ³ñòýìà ñåòêàâàé áÿñïåê³ (firewall)!"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "Íàñòðîéêà ISDN"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Àáÿðûöå âàøàãà ïðàâàéäàðà.\n"
-"êàëi ÿãî íÿìà ¢ ãýòûì ñïiñå, àáÿðûöå òûï ``Iíøû''"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Å¢ðîïà (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Ïàäêëþ÷ýííå"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Ïàäêëþ÷ýííå \n"
-" íå ïðàç D-êàíàë (âûëó÷àíûÿ êàíàëû)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "ßêi ïðàòàêîë âû æàäàåöå âûêàðûñòî¢âàöü?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "ßêi òûï êàðòû âû ìàåöå?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Íå âÿäîìà"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Êàëi âû ìàåöå ISA êàðòó, âåëi÷ûíi íà íàñòóïíûì ýêðàíå ïàâiííû áûöü "
-"ñàïðà¢äíûìi.\n"
-"\n"
-"Êàëi âû ìàåöå PCMCIA êàðòó, âû ïàâiííû âåäàöü irq i io âàøàé êàðòû.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Àäìÿíiöü"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Ïðàöÿãíóöü"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "ßêàÿ ¢ âàñ ISDN êàðòà?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Âûçíà÷àíà ISDN PCI êàðòà, àëå íåâÿäîìû ÿå òûï. Êàëi ëàñêà, ïàçíà÷öå PCI "
-"êàðòó íà íàñòóïíûì ýêðàíå."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Êàðòà ISDN PCI íå çíîéäçåíà. Êàëi ëàñêà, ïàçíà÷öå íà íàñòóïíûì ýêðàíå."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Äà ÿêîãà ïàñëÿäî¢íàãà ïîðòó äàëó÷àíû ìàäýì?"
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Ïàðàìåòðû êàìóòàâàíàãà çëó÷ýííÿ (Dialup)"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Iìÿ çëó÷ýííÿ"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Íóìàð òýëåôîíó"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Iìÿ (login ID)"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "íà àñíîâå ñêðûïòó"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "íà àñíîâå òýðìiíàëó"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Iìÿ äàìåíó"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Ïåðøû ñåðâåð DNS"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Äðóãi ñåðâåð DNS:"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Âû ìîæàöå àäêëþ÷ûööà ö³ ïåðàêàíô³ãóðàâàöü âàøàå çëó÷ýííå."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Âû ìîæàöå àäêëþ÷ûööà ö³ ïåðàêàíô³ãóðàâàöü âàøàå çëó÷ýííå."
-
-#: ../../network/netconnect.pm_.c:33
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "ßê âû ïëàíóåöå äàëó÷ûööà äà Iíòýðíýòó?"
-
-#: ../../network/netconnect.pm_.c:36
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Âû ìîæàöå àäêëþ÷ûööà ö³ ïåðàêàíô³ãóðàâàöü âàøàå çëó÷ýííå."
-
-#: ../../network/netconnect.pm_.c:36
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "ßê âû ïëàíóåöå äàëó÷ûööà äà Iíòýðíýòó?"
-
-#: ../../network/netconnect.pm_.c:40
-#, fuzzy
-msgid "Connect to Internet"
-msgstr "Äàëó÷ýííå äà Iíòýðíýòó"
-
-#: ../../network/netconnect.pm_.c:42
-#, fuzzy
-msgid "Disconnect from Internet"
-msgstr "Äàëó÷ýííå äà Iíòýðíýòó"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Iíòýðíýò çëó÷ýííå i êàíôiãóðàöûÿ"
-
-#: ../../network/netconnect.pm_.c:96
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Âû ìîæàöå àäêëþ÷ûööà ö³ ïåðàêàíô³ãóðàâàöü âàøàå çëó÷ýííå."
-
-#: ../../network/netconnect.pm_.c:105
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Âû ìîæàöå àäêëþ÷ûööà ö³ ïåðàêàíô³ãóðàâàöü âàøàå çëó÷ýííå."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Êàíôiãóðàöûÿ ñåòêi"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:157
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Àáÿðûöå àñíî¢íàãà êàðûñòàëüíiêà:"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Âûçíà÷ýííå ïðûëàäà¢..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Äóáëÿâàííå ïóíêòó ìàíöiðàâàííÿ %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Íàñòðîéêà ISDN"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Ðàçìåðêàâàííå"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, fuzzy, c-format
-msgid "detected on interface %s"
-msgstr "Ñåòêàâû iíòýðôåéñ"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-#, fuzzy
-msgid "Cable connection"
-msgstr "Çëó÷ýííå ïðûíòýðó"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Çëó÷ýííå ïðûíòýðó"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-#, fuzzy
-msgid "LAN connection"
-msgstr "Ðàçìåðêàâàííå"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:190
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Àáÿðûöå iíñòðóìåíò, ÿêi æàäàåöå ñêàðûñòàöü"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:215
-#, fuzzy
-msgid "Internet connection"
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Âû æàäàåöå, êàá ãýòàå çëó÷ýííå ñòàðòàâàëà ïðû çàãðóçöû?"
-
-#: ../../network/netconnect.pm_.c:239
-#, fuzzy
-msgid "Network configuration"
-msgstr "Êàíôiãóðàöûÿ ñåòêi"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Öi æàäàåöå ïðàòýñöiðàâàöü íàñòðîéêi?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Êàëi ëàñêà, óâÿäçiöå IP êàíôiãóðàöûþ äëÿ âàøàé ìàøûíû.\n"
-"Êîæíû ïóíêò ïàâiíåí áûöü çàïî¢íåíû ÿê IP àäðàñ ¢ äçåñÿòêîâà-êðîïêàâàé \n"
-"íàòàöûi (íàïðûêëàä, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Íàñòðîéêà ñåòêàâàé ïðûëàäû %s"
-
-#: ../../network/network.pm_.c:298
-#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr "Ñåðâåð XFree86: %s\n"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP àäðàñ"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Ìàñêà ñåòêi"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "À¢òàìàòû÷íû IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP àäðàñ ïàâiíåí áûöü ó ôàðìàöå 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Óâÿäçiöå iìÿ ñâà¸é ìàøûíû (host).\n"
-"Iìÿ âàøàé ìàøûíû ïàâiííà áûöü çàäàäçåíà ïî¢íàñöþ,\n"
-"íàïðûêëàä ``mybox.mylab.myco.com''.\n"
-"Âû ìîæàöå òàêñàìà ¢âåñöi IP àäðàñ øëþçó, êàëi ¸í ó âàñ ¸ñöü."
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS ñåðâåð"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Øëþç"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Ïðûëàäà-øëþç"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Íàñòðîéêà proxy êýøóþ÷ûõ ñåðâåðà¢"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Proxy ïàâiíåí áûöü http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Proxy ïàâiíåí áûöü ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Íàñòðîéêà çëó÷ýííÿ ç Iíòýðíýòàì"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Öi æàäàåöå çàðàç ïàñïðàáàâàöü äàëó÷ûööà äà Iíòýðíýòó?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "ßêi òûï âàøàãà ISDN çëó÷ýííÿ?"
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "ßê âû ïëàíóåöå äàëó÷ûööà äà Iíòýðíýòó?"
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"\n"
-"Âû ìîæàöå àäêëþ÷ûööà ö³ ïåðàêàíô³ãóðàâàöü âàøàå çëó÷ýííå."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Íàñòðîéêà äàëó÷ýííÿ äà Iíòýðíýòó"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Êàëi ëàñêà, çàïî¢íiöå öi ïàçíà÷öå ïîëå íiæýé"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ êàðòû"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Àäðàñû ïàìÿö³ êàðòû (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "IO êàðòû"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "IO_0 êàðòû"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "IO_1 êàðòû"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Âàø àñàáiñòû òýëåôîííû íóìàð"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Iìÿ ïðàâàéäàðó, íàïðûêëàä ïðàâàéäàð.net"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Íóìàð òýëåôîíó ïðàâàéäàðà"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-#, fuzzy
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 ïðàâàéäàðó"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-#, fuzzy
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 ïðàâàéäàðó"
-
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "Âûáàð êëàâiÿòóðû"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Ðýæûì çëó÷ýííÿ"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-#, fuzzy
-msgid "Connection speed"
-msgstr "Iìÿ çëó÷ýííÿ"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Iìÿ çëó÷ýííÿ"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Iìÿ äëÿ ¢âàõîäó (iìÿ êàðûñòàëüíiêó)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Ïàðîëü äëÿ ¢âàõîäó"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Ïàøûðàíû ðàçäçåë íå ïàäòðûìëiâàåööà ãýòàé ïëàòôîðìàé"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Âû ìàåöå äçiðêó ¢ òàáëiöû ðàäçåëà¢, àëå ÿ íå ìàþ ìàã÷ûìàñöi ÿå ñêàðûñòàöü.\n"
-"Àäçiíû âûõàä ó òûì, êàá ïåðàìÿñöiöü ïåðøàñíûÿ ðàçäçåëû òàê, êàá äçiðêà iøëà\n"
-"àäðàçó çà ïàøûðàíûì (extended) ðàçäçåëàì"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Àäíà¢ëåííå ç ôàéëà %s íå àòðûìàëàñÿ: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Äðýííû ôàéë ðýçåðâîâàé êîïii"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Ïàìûëêà çàïiñó ¢ ôàéë %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ïàâiííû ìåöü"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "âàæíà"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "âåëüìi äîáðà"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "äîáðà"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ìîæà áûöü"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Ëàêàëüíû ïðûíòýð"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Àääàëåíû ïðûíòýð"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Àääàëåíû ñåðâåð CUPS"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Àääàëåíû ñåðâåð lpd"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Ñåòêàâû ïðûíòýð (socket)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Ñåðâåð äðóêó"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "URI ïðûíòýðó"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(ìîäóëü %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Âûáàð òûïó çëó÷ýííÿ ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "ßê ïðûíòàð äàëó÷àíû?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"Àääàëåíû CUPS ñåðâåð íå ïàòðàáóå àä Âàñ íàñòðîéê³ ïðûíòýðó\n"
-"íà ãýòàé ìàøûíå, ¸í áóäçå çíîéäçåíû à¢òàìàòû÷íà.\n"
-"Êàë³ Âû íå ¢ïý¢íåíû, àáÿðûöå \"Àääàëåíû ñåðâåð CUPS\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Íÿìà"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Àáÿðûöå àñíî¢íàãà êàðûñòàëüíiêà:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-#, fuzzy
-msgid "Close"
-msgstr "Ïîðò ìûøû"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "Àääàëåíû ïðûíòýð"
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP àäðàñ ïàâiíåí áûöü ó ôàðìàöå 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "Ëàêàëüíû ïðûíòýð"
-
-#: ../../printerdrake.pm_.c:146
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "IP ñåðâåðà SMB"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Ïîðò"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Íàñòðîéêà ìàäýìó"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Âûçíà÷ýííå ïðûëàäà¢..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Ïðàâåðêà ïàðòî¢"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Ïðûíòýð ìàäýëi \"%s\" çíîéäçåíû íà "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Ëàêàëüíû ïðûíòýð"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Äà ÿêîãà ïîðòó äàëó÷àíû âàø ïðûíòýð \n"
-"(/dev/lp0 ýêâiâàëåíòíû LPT1:)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Ïîðò ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "×ûòàþ áàçó äàäçåíûõ äðàéâåðî¢ CUPS"
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Îïöûi àääàëåíàãà ïðûíòýðó lpd"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Äëÿ íàñòðîéêi àääàëåíàé ÷àðãi äðóêó âàì ïàòðýáíà\n"
-"ïàçíà÷ûöü iìÿ àääàëåíàãà ñåðâåðà i iìÿ ÷àðãi äðóêó,\n"
-"ó ÿêóþ àääàëåíû ñåðâåð áóäçå àäïðà¢ëÿöü çàäàííi."
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "Àääàëåíû âóçåë"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Àääàëåíû ïðûíòýð"
-
-#: ../../printerdrake.pm_.c:320
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Àääàëåíû âóçåë"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Àääàëåíû âóçåë"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Îïöûi ïðûíòýðó SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Äëÿ äðóêó íà ïðûíòýðû SMB íåàáõîäíà ïàçíà÷ûöü iìÿ õîñòó SMB (íå çà¢ñ¸äû "
-"ñóïàäàå ç iìåíåì ó ñåòöû TCP/IP) i àäðàñ IP ñåðâåðà äðóêó, à òàêñàìà iìÿ "
-"ðýñóðñó, ÿêi ñïàëó÷àíû ç âûáðàíûì ïðûíòýðàì, iìÿ êàðûñòàëüíiêó, ïàðîëü i "
-"iíôàðìàöûþ àá ïðàöî¢íàé ãðóïå."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "Iìÿ ñåðâåðó SMB"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "IP ñåðâåðà SMB"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Iìÿ äëÿ ðàçìåðêàâàíàãà ðýñóðñó"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Ïðàöî¢íàÿ ãðóïà"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "Îïöûi ïðûíòýðó NetWare"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Äëÿ äðóêó íà ïðûíòýðû NetWare íåàáõîäíà ïàçíà÷ûöü iìÿ ñåðâåðó äðóêó NetWare "
-"(íå çà¢ñ¸äû ñóïàäàå ç iìåíåì ó ñåòöû TCP/IP) i iìÿ ÷àðãi äðóêó, ÿêàÿ "
-"àäïàâÿäàå àáðàíàìó ïðûíòýðó, à òàêñàìà iìÿ êàðûñòàëüíiêó i ïàðîëü."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Ñåðâåð äðóêó"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Iìÿ ÷àðãi äðóêó"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Îïöûi ñîêåòó ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:528
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Êàá äðóêàâàöü ïðàç ñîêåò äðóêàðêi, âàì íåàáõîäíà çàáÿñïå÷ûöü\n"
-"iìÿ ïðûíòýðó i ìàã÷ûìà ÿãî íóìàð ïîðòó."
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "Iìÿ ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:537
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Iìÿ ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "URI ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Iìÿ äðóêàðêi"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Àïiñàííå"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Ðàçìåðêàâàííå"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "×ûòàþ áàçó äàäçåíûõ äðàéâåðî¢ CUPS"
-
-#: ../../printerdrake.pm_.c:793
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Çëó÷ýííå ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:794
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "ßêi òûï äðóêàðêi âû ìàåöå?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Íàñòðîéêà çëó÷ýííÿ ç Iíòýðíýòàì"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Íàñòðîéêà çëó÷ýííÿ ç Iíòýðíýòàì"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Æàäàåöå ïðàòýñöiðàâàöü äðóê?"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "Ïðàâåðêà ïàðòî¢"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-#, fuzzy
-msgid "No test pages"
-msgstr "Òàê,  íàäðóêàâàöü àáåäçâå ñòàðîíêi òýêñòó"
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "Ïðûíòýð"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "Ñòàíäàðòíû"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Äðóê òýñòàâûõ ñòàðîíàê"
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "Äðóê òýñòàâûõ ñòàðîíàê"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Äðóê òýñòàâûõ ñòàðîíàê"
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Òýñòàâûÿ ñòàðîíêi àäïðà¢ëåíû äýìàíó äðóêó.\n"
-"Ïåðàä òûì, ÿê ïðûíòýð çàïðàöóå, ìîæà ïðàéñöi ïý¢íû ÷àñ.\n"
-"Ñòàòóñ äðóêó:\n"
-"%s\n"
-"\n"
-"¨í ïðàöóå íàðìàëüíà?"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Òýñòàâûÿ ñòàðîíêi àäïðà¢ëåíû äýìàíó äðóêó.\n"
-"Ïåðàä òûì, ÿê ïðûíòýð çàïðàöóå, ìîæà ïðàéñöi ïý¢íû ÷àñ.\n"
-"¨í ïðàöóå íàðìàëüíà?"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Iìÿ äðóêàðêi"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Àäëó÷ýííå àä ñåòêi"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "Îïöûi ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "×ûòàþ áàçó äàäçåíûõ äðàéâåðî¢ CUPS"
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Íàñòðîéêà çëó÷ýííÿ ç Iíòýðíýòàì"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "Iìÿ äðóêàðêi"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "×ûòàþ áàçó äàäçåíûõ äðàéâåðî¢ CUPS"
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Íàñòðîéêà ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "ßêi òûï âàøàãà ISDN çëó÷ýííÿ?"
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Íàñòðîéêà ñåòêi"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Ìàíiòîð ïàêóëü íå íàñòðîåíû"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Íàñòðîéêà ñåòêi"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "ßêóþ ñiñòýìó äðóêó Âû æàäàåöå âûêàðûñòî¢âàöü?"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Âûñîêi"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Ïàðàíàiäàëüíû"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "ßêóþ ñiñòýìó äðóêó Âû æàäàåöå âûêàðûñòî¢âàöü?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Âûáàð òûïó çëó÷ýííÿ ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:1728
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "ßêóþ ñiñòýìó äðóêó Âû æàäàåöå âûêàðûñòî¢âàöü?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Íàñòðîéêà ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Îïöûi ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "×ûòàþ áàçó äàäçåíûõ äðàéâåðî¢ CUPS"
-
-#: ../../printerdrake.pm_.c:1845
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Æàäàåöå íàñòðîiöü ïðûíòýð?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Çâû÷àéíû"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Ïà äàìà¢ëåííþ)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Àääàëåíû ñåðâåð CUPS"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "Àääàëåíû ñåðâåð CUPS"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-#, fuzzy
-msgid "Add printer"
-msgstr "Iìÿ äðóêàðêi"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Öi æàäàåöå ïðàòýñöiðàâàöü íàñòðîéêi?"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Íàñòðîéêà çëó÷ýííÿ ç Iíòýðíýòàì"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Çëó÷ýííå ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "Äðóê òýñòàâûõ ñòàðîíàê"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "Àääàëåíû ïðûíòýð"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "×ûòàþ áàçó äàäçåíûõ äðàéâåðî¢ CUPS"
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Öi æàäàåöå ïðàòýñöiðàâàöü íàñòðîéêi?"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "×ûòàþ áàçó äàäçåíûõ äðàéâåðî¢ CUPS"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Íàñòðîéêà proxy êýøóþ÷ûõ ñåðâåðà¢"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Ïîðò"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Proxy ïàâiíåí áûöü http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Proxy ïàâiíåí áûöü ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "À¢òàìàòû÷íû ¢âàõîä ó ñiñòýìó"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Ïàðîëü"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Íÿìà ïàðîëþ"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Ïàðîëi íå ñóïàäàþöü"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Íå àòðûìëiâàåööà äàäàöü ðàçäçåë íà _àäôàðìàöiðàâàíû_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Íå àòðûìëiâàåööà çàïiñ ó ôàéë %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid íå ïðàöàçäîëüíû"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid íå ïðàöàçäîëüíû (ìîæà raid ïðûëàäû àäñóòíi÷àþöü?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Íåäàñòàòêîâà ðàçäçåëࢠäëÿ RAID óçðî¢íÿ %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, ïåðûÿäû÷íû êàìàíäíû ïëàíàâàëüíiê."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"ampd âûêàðûñòî¢âàåööà äëÿ àäñëåæâàííÿ ñòàòóñó áàòàðýi i âÿäçåííÿ "
-"ñòàòûñòûêi.\n"
-"ßãî ìîæíà âûêàðûñòî¢âàöü äëÿ âûêëþ÷ýííÿ ìàøûíû ïðû íiçêiì çàðàäçå áàòàðýi."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Êàìàíäû, ÿêiÿ âûêîíâàþööà, ôiêñóþööà ïà êàìàíäçå i ÷àñå ÿå âûêàíàííÿ\n"
-"i âûêîíâàþööà ãðóïû êàìàíä, êàëi çàãðóçêà ïàìÿöi íiæýé äàñòàòêîâàé."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron - ñòàíäàðòíàÿ UNIX ïðàãðàìà, ÿêàÿ âûêîíâàå ïðàãðàìû êàðûñòàëüíiêà\n"
-"ïðàç ïàçíà÷àíûÿ ïåðûÿäû ÷àñó. Vixie cron äàäàå ðàä äàïà¢íåííÿ¢ äà "
-"ñòàíäàðòíàãà\n"
-"UNIX cron, óêëþ÷àþ÷û ëåïøû ¢çðîâåíü áÿñïåêi i ìîöíûÿ êàíôiãóðàöûéíûÿ îïöûi."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM äàäàå ïàäòðûìêó ìûøû äà ïðàãðàìà¢, ÿêiÿ ïðàöóþöü ó òýêñòàâûì ðýæûìå,\n"
-"òàêiõ ÿê Midnight Commander. Ãýòà äàçâàëÿå âûêàðûñòî¢âàöü ìûø ïðû "
-"êàïiðàâàííi i ¢ñòà¢öû,\n"
-"i ¢êëþ÷àå ïàäòðûìêó ¢ñïëûâàþ÷ûõ (pop-up) ìåíþ ¢ òýêñòàâûì ðýæûìå."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache - ãýòà World Wide Web ñåðâåð. ¨í âûêàðûñòî¢çâàåöà äëÿ àáñëóãî¢âàííÿ\n"
-"HTML ôàéëࢠi CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Iíòýðíýò ñóïåðñåðâåð-äýìàí (çàâåööà inetd) çàïóñêàå ïðû ñòàðöå \n"
-"êîëüêàñöü ðîçíûõ iíòýðíýò ñëóæáà¢, ÿêiÿ íåàáõîäíû. ßãî ìîæíà âûêàðûñòî¢âàöü "
-"äëÿ ïóñêó\n"
-"øìàòë³ê³õ ñëóæáà¢, óêëþ÷àþ÷û telnet, ftp, rsh i rlogin. Áëàêóþ÷û inetd, "
-"áëàêóåì\n"
-"óñå ñëóæáû, çà ÿêiÿ ¸í àäêàçâàå."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ãýòû ïàêåò çàãðóæàå àáðàíóþ ðàñêëàäêó êëàâiÿòóðû ÿê íàáîð ç\n"
-"/etc/sysconfig/keyboard. ¨íà ìîæà áûöü àáðàíà òàêñàìà ç äàïàìîãàé "
-"kbdconfig.\n"
-"Âû ìîæàöå çðàáiöü äàñòóïíàé ÿå äëÿ øìàòë³ê³õ ìàøûíà¢."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd - ãýòû äýìàí äðóêó, ïàòðýáíû äëÿ êàðýêòíàé ïðàöû lpr. Ãýòà\n"
-"ñåðâåð, ÿêi êiðóå ïðàöàé ïðûíòýðó(à¢)."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) - ãýòà ñåðâåð äàìåííûõ iì¸íà¢, ÿêi âûêàðûñòî¢âàåööà äëÿ\n"
-"ïåðàêëàäàííÿ iì¸í âóçëî¢ ó IP àäðàñû."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Ìàíöiðàâàöü i ðàçìàíöiðàâàöü óñå ñåòêàâûÿ ôàéëàâûÿ ñiñòýìû (NFS),\n"
-" SMB (Lan Manager/Windows) i NCP (Netware) ïóíêòû ìàíöiðàâàííÿ."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Àêòûâiçàâàöü/äýàêòûâiçàâàöü óñå ñåòêàâûÿ iíòýðôåéñû, ñêàíôiãóðàâàíûÿ äëÿ\n"
-"ñòàðòó ïðû çàãðóçöû ñiñòýìû."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS - ãýòà âÿäîìû ïðàòàêîë äëÿ äîñòóïó äà ôàéëࢠïðàç TCP/IP ñåòêi.\n"
-"Ãýòàÿ ñëóæáà çàáÿñïå÷âàåööà NFS ñåðâåðàì, ÿêi êàíôiãóðûðóåöà ïðàç\n"
-"/etc/exports ôàéë."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS -  ãýòà âÿäîìû ïðàòàêîë äëÿ äîñòóïó äà ôàéëࢠïðàç TCP/IP\n"
-"ñåòêi. Ãýòàÿ ñëóæáà ¢ïëûâàå íà íàÿ¢íàñöü ñóâÿçi ïàìiæ NFS ôàéëàìi."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Ïàäòðûìêà PCMCIA - ãýòà çâû÷àéíà ïàäòðûìêà òàêiõ ðý÷à¢, ÿê Ethernet i\n"
-"ìàäýìû ¢ íà¢òáóêàõ. Âàì íÿìà íåàáõîäíàñöi êàíôiãóðàâàöü iõ, êàëi íà âàøàé\n"
-"ìàøûíå iõ íÿìà, öi ÿíà íå íà¢òáóê."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper (àãëÿäàëüíiê ïàðòî¢) êiðóå RPC çëó÷ýííÿìi, ÿêiÿ çâû÷àéíà\n"
-"âûêàðûñòî¢âàþööà òàêiìi ïðàòàêîëàìi ÿê NFS i NIS. Portmap ñåðâåð ïàâiíåí "
-"âûêîíâàööà\n"
-"íà ìàøûíàõ ÿêiÿ ïðàöóþöü ÿê ñåðâåðû äëÿ ïðàòàêîëà¢, ÿêiÿ ñêàðûñòî¢âàþöü RPC."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix -  ãýòà ïàøòîâû òðàíñïàðòíû àãåíò, ïðàãðàìà, ÿêàÿ\n"
-"ïåðàìÿø÷àå ïîøòó ç àäíîé ìàøûíû íà éíøóþ."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Çàõàâàöü i àäíàâiöü ñiñòýìíû ýíòðàïiéíû ïóë äëÿ âûñîêàé ÿêàñöi\n"
-"ãåíåðàöû³ âûïàäêîâûõ ë³êà¢."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Äýìàí ìàðøðóòûçàöûi äàçâàëÿå äûíàìi÷íûì òàáëiöàì IP ìàðøðóòûçàöûi\n"
-"àäíà¢ëÿööà ïðàç RIP ïðàòàêîë. RIP âûêàðûñòî¢âàåööà ¢ ìàëûõ ñåòêàõ, áîëüø\n"
-"ñêëàäàíûÿ ïðàòàêîëû ìàðøðóòûçàöûi - ó âÿëiêiõ ñåòêàõ."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Ïðàòàêîë rstat äàçâàëÿå êàðûñòàëüíiêàì ñåòêi àòðûìëiâàöü\n"
-"ïàìåðû íàãðóçêi äëÿ êîæíàé ìàøûíû ñåòêi."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Ïðàòàêîë rusers äàçâàëÿå êàðûñòàëüíiêàì ñåòêi âûçíà÷àöü, õòî\n"
-"¢âàéøî¢ i ïðàöóå íà ìàøûíàõ ¢ ñåòöû."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Ïðàòàêîë rwho äàå ìàã÷ûìàñöü êàðûñòàëüíiêàì àòðûìàöü ñïiñ ¢ñiõ\n"
-"êàðûñòàëüíiêà¢, óâàéøî¢øûõ íà ìàøûíó, âûêàíࢠrwho äýìàí (ïàäîáíû íà finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog - ãýòà ñðîäàê, ç äàïàìîãàé ÿêîãà ìíîãiÿ äýìàíû çàïiñâàþöü "
-"ïàâåäàìëåííi\n"
-"¢ ðîçíûÿ ôàéëû ñòàòûñòûêi. Ãýòà âåëüìi äîáðà äëÿ àãëÿäó ïðàöû ðîçíûõ ñëóæáà¢."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:88
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Çàïóñêàå i ïðûïûíÿå X Font Server ïðû çàãðóçöû i âûêëþ÷ýííi."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Àáÿðûöå, ÿêiÿ ñåðâiñû çàïóñêàöü à¢òàìàòû÷íà ïðû çàãðóçöû"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "Ïðûíòýð"
-
-#: ../../services.pm_.c:127
-#, fuzzy
-msgid "Internet"
-msgstr "öiêàâà"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "Mouse Systems"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Îïöûi àääàëåíàãà ïðûíòýðó lpd"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Ñåðâåð äðóêó"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "ïðûëàäà"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Óâàãà!"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Äàëó÷ûöü"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Yaboot"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Óñòàëÿâàííå ïàêåòó %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Òàáëiöà ðàçäçåëࢠíå ÷ûòàåööà, ÿíà çàíàäòà ñàïñàâàíà äëÿ ìåíÿ :(\n"
-"Ïàñïðàáóþ iñöi äàëåé i áóäó ïðàïóñêàöü äðýííûÿ ðàçäçåëû"
-
-#: ../../standalone/drakautoinst_.c:44
-#, fuzzy
-msgid "Error!"
-msgstr "Ïàìûëêà"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Íàñòðîéêà ïàñëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Íàñòðîéêà ìàäýìó"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Ïðûì³öå âiíøàâàííi!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå çàðàç ìàã÷ûìà"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:124
-#, fuzzy
-msgid "disable"
-msgstr "Òàáëiöà"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-#, fuzzy
-msgid "reconfigure"
-msgstr "Íàñòðîéêà X Window"
-
-#: ../../standalone/drakgw_.c:127
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "Âûçíà÷ýííå ïðûëàäà¢..."
-
-#: ../../standalone/drakgw_.c:135
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå çàðàç çàáàðîíåíà"
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå çàðàç çàáàðîíåíà"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:149
-#, fuzzy
-msgid "enable"
-msgstr "Òàáëiöà"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:161
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå çàðàç ìàã÷ûìà"
-
-#: ../../standalone/drakgw_.c:182
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Âàø êàìï'þòàð ìîæà áûöü ñêàíô³ãóðàâàíû íà ñóìåñíàå âûêàðûñòàííå\n"
-" ²íòýðíýòó (Internet Connection Sharing)?\n"
-"\n"
-"Çà¢âàãà: âàì ïàòðýáíû ñåòêàâû àäàïòàð äëÿ ïàäêëþ÷ýííÿ äà ËÂÑ.\n"
-"\n"
-"Âû æàäàåöå óñòàëÿâàöü ñóìåñíû äîñòóï äà Internet?"
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:209
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Ñåòêàâû iíòýðôåéñ"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Ó âàøàé ñ³ñòýìå íÿìà íiâîäíàãà ñåòêàâàãà àäàïòàðà!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Íi âîäíû ethernet ñåòêàâû àäàïòàð ó âàøàé ñiñòýìå íå âûçíà÷àíû. Êàëi ëàñêà, "
-"ñêàðûñòàéöå êàíôiãóðàöûéíû iíñòðóìýíò."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Ñåòêàâû iíòýðôåéñ"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Êàëi ëàñêà, àáÿðûöå ñåòêàâû àäàïòàð, ÿê³ áóäçå âûêàðûñòàíû äëÿ äàëó÷ýííÿ äà "
-"âàøàé ëàêàëüíàé ñåòêi."
-
-#: ../../standalone/drakgw_.c:243
-#, fuzzy
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Óâàãà, ñåòêàâû àäàïòàð ñêàíôiãóðàâàíû.\n"
-"Öi æàäàåöå ïåðàêàíôiãóðàâàöü ÿãî?"
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Ïàòýíöûéíû àäðàñ ËÂÑ êàíôëiêòóå ç áÿãó÷àé êàíôiãóðàöûÿé %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Çíîéäçåíà ñ³ñòýìà ñåòêàâàé áÿñïåê³ (firewall)!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Óâàãà! Çíîéäçåíà ³ñíóþ÷àÿ ñiñòýìà ñåòêàâàé áÿñïåêi (firewall). Âàì ìàã÷ûìà "
-"ñïàòðýá³ööà ñêàðýêòàâàöü ÿå ïàñëÿ ¢ñòàëÿâàííÿ."
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Configuring..."
-msgstr "Íàñòðîéêà IDE"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Êàíô³ãóðàöûÿ ñöýíàðà¢, óñòàëÿâàííå ÏÇ, çàïóñê ñëóæáà¢..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Ïðàáëåìû ç óñòàëÿâàííåì ïàêåòó %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Óñå àäêàíô³ãóðàâàíà.\n"
-"Çàðàç âû ìîæàöå ñóìåñíà âûêàðûñòî¢âàöü ïàäêëþ÷ýííå äà Internet\n"
-"ç ³íøûì³ êàìï'þòýðàì³ ¢  âàøàé ËÂÑ, êàðûñòàþ÷ûñÿ à¢òàìàòû÷íûì\n"
-"êàíô³ãóðàâàííåì (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:619
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå çàðàç ìàã÷ûìà"
-
-#: ../../standalone/drakgw_.c:624
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Iíòýðíýò çëó÷ýííå i êàíôiãóðàöûÿ"
-
-#: ../../standalone/drakgw_.c:631
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå"
-
-#: ../../standalone/draknet_.c:79
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Êàíôiãóðàöûÿ ñåòêi"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-#, fuzzy
-msgid "Profile: "
-msgstr "ïàìûëêà ìàíöiðàâàííÿ: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-#, fuzzy
-msgid "Hostname: "
-msgstr "Iìÿ ìàøûíû"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr ""
-
-#: ../../standalone/draknet_.c:180
-#, fuzzy
-msgid "Type:"
-msgstr "Òûï: "
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Øëþç:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-#, fuzzy
-msgid "Connected"
-msgstr "Iìÿ çëó÷ýííÿ"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-#, fuzzy
-msgid "Not connected"
-msgstr "Ðàçìåðêàâàííå"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:215
-#, fuzzy
-msgid "Starting your connection..."
-msgstr "ßêi òûï âàøàãà ISDN çëó÷ýííÿ?"
-
-#: ../../standalone/draknet_.c:223
-#, fuzzy
-msgid "Closing your connection..."
-msgstr "ßêi òûï âàøàãà ISDN çëó÷ýííÿ?"
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "The system is now disconnected."
-msgstr "ßê âû ïëàíóåöå äàëó÷ûööà äà Iíòýðíýòó?"
-
-#: ../../standalone/draknet_.c:243
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Íàñòðîéêà ñëóæáà¢"
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Íàñòðîéêà ADSL"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "Driver"
-msgstr "ñåðâåð"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "Interface"
-msgstr "Ñåòêàâû iíòýðôåéñ"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "State"
-msgstr "Ñòàðòàâàå ìåíþ"
-
-#: ../../standalone/draknet_.c:267
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Íàñòðîéêà ëàêàëüíàé ñåòêi"
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:325
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Ïðàâåðêà ïàðàìåòðࢠíàñòðîéêi"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:450
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "Íàñòðîéêà"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "activate now"
-msgstr "Àêòû¢íû"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "desactivate now"
-msgstr "Àêòû¢íû"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:562
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Iíòýðíýò çëó÷ýííå i êàíôiãóðàöûÿ"
-
-#: ../../standalone/draknet_.c:566
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Iíòýðíýò çëó÷ýííå i êàíôiãóðàöûÿ"
-
-#: ../../standalone/draknet_.c:575
-#, fuzzy
-msgid "Connection type: "
-msgstr "Iìÿ çëó÷ýííÿ"
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Ñàðäý÷íà çàïðàøàåì ó Crackers"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Çóñ³ì ñëàáû"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Ïàðàíàiäàëüíû"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ãýòû óçðîâåíü íåàáõîäíà âûêàðûñòî¢âàöü ç àñöÿðîãàé. Ñiñòýìà áóäçå ïðàñöåé\n"
-"ó êàðûñòàííi, àëå i áîëüø ÷óòíàé: ãýòû óçðîâåíü áÿñïåêi íåëüãà "
-"âûêàðûñòî¢âàöü\n"
-"íà ìàøûíàõ, ÿêiÿ äàëó÷àíû äà ñåòêi öi äà Internet. Óâàõîä íå àáàðîíåíû "
-"ïàðîëåì."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Ïàðîëü çàðàç óêëþ÷àíû, àëå âûêàðûñòàííå êàìï'þòýðó ¢ ÿêàñöi ñåòêàâàãà\n"
-"òàêñàìà íå ðýêàìåíäàâàíà."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Ãýòû óçðîâåíü áÿñïåêi ìàå øýðàã ïàëÿïøýííÿ¢, ó ïåðøóþ ÷àðãó\n"
-"ïàâÿëi÷ûëàñÿ êîëüêàñöü ïðàâåðàê i ïàïÿðýäæàííÿ¢."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Ãýòà ñòàíäàðòíû óçðîâåíü áÿñïåêi, ÿêi ðýêàìåíäàâàíû äëÿ êàìï'þòýðó,\n"
-"ÿêi äàëó÷àíû äà Internet ó ÿêàñöi êëiåíòó. Äàäàíûÿ íîâûÿ ïðàâåðêi\n"
-"áÿñïåêi."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Íà ãýòàì óçðî¢íå áÿñïåêi ìàã÷ûìà âûêàðûñòàííå ñiñòýìû ¢ ÿêàñöi\n"
-"ñåðâåðó. Óçðîâåíü áÿñïåêi äàñòàòêîâà âûñîêi äëÿ ðàáîòû\n"
-"ñåðâåðó, ÿêi äàïóñêàå çëó÷ýííi ñà øìàòëiêiìi êëiåíòàìi."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Ïðûìàþööà ¢ëàñöiâàñöi 4 óçðî¢íÿ, àëå çàðàç ñiñòýìà ïî¢íàñöþ çà÷ûíåíà.\n"
-"Ïàðàìåòðû áÿñïåêi ¢ñòàíî¢ëåíû íà ìàêñiìóì."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "Íàñòðîéêi ¢çðî¢íÿ áÿñïåêi"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Àáÿðûöå äàäàòêîâûÿ íàñòðîéêi äëÿ ñåðâåðà"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Íàñòðîéêi ¢çðî¢íÿ áÿñïåêi"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Äàëó÷ýííå äà Iíòýðíýòó"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Àáÿðûöå iíñòðóìåíò, ÿêi æàäàåöå ñêàðûñòàöü"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Âû æàäàåöå êàá BackSpace ïðàöàâࢠó êàíñîë³ ÿê Delete?"
-
-#: ../../standalone/livedrake_.c:23
-#, fuzzy
-msgid "Change Cd-Rom"
-msgstr "Çìÿíiöü ïàìåðû ýêðàíó"
-
-#: ../../standalone/livedrake_.c:24
-#, fuzzy
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Çìÿíiöå âàø Cd-Rom!\n"
-"\n"
-"Êàëi ëàñêà, óñòà¢öå Cd-Rom, ïàçíà÷àíû \"%s\", ó âàø äûñêàâîä i íàöiñíiöå Oê "
-"ïàñëÿ.\n"
-"Êàëi âû íå ìàåöå ÿãî, íàöiñíiöå Àäìÿíiöü, êàá àäìÿíiöü óñòàëÿâàííå ç ãýòàãà "
-"Cd."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Íåìàã÷ûìà çàïóñö³öü live upgrade !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "serial_usb íå çíîéäçåí\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Ýìóëÿâàöü òðýöþþ êíîïêó?"
-
-#: ../../standalone/tinyfirewall_.c:29
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Çíîéäçåíà ñ³ñòýìà ñåòêàâàé áÿñïåê³ (firewall)!"
-
-#: ../../standalone/tinyfirewall_.c:42
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Çíîéäçåíà ñ³ñòýìà ñåòêàâàé áÿñïåê³ (firewall)!"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Âûáàð ìîâû"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Êëàñ óñòàëÿâàííÿ"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Âûçíà÷ýííå æîðñòêàãà äûñêó"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Íàñòðîéêà ìûøû"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Âûáàð êëàâiÿòóðû"
-
-#: ../../steps.pm_.c:19
-#, fuzzy
-msgid "Security"
-msgstr "êó÷àðàâû"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Íàñòð. ôàéëàâûõ ñiñòýìà¢"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Ôàðìàòàâàííå ðàçäçåëà¢"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Âûáàð ïàêåòà¢"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Óñòàëÿâàííå ñiñòýìû"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Äàäàöü êàðûñòàëüíiêà"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Íàñòðîéêà ñåòêi"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Íàñòðîéêà ñëóæáà¢"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Ñòâàðûöü çàãð. äûñê"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Óñòàëÿâàííå çàãðóç÷ûêó"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Íàñòðîéêà X Window"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Çàêàí÷ýííå ¢ñòàëÿâàííÿ"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ïàìûëêà àäêðûööÿ %s äëÿ çàïiñó: %s"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Ñåòêàâû ïðûíòýð (socket)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office"
-msgstr "äîáðà"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "Íàâóêîâûÿ ïðûêëàäàíí³"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "²íñòðóìåíòàëüíûÿ ñðîäê³ äëÿ Palm Pilot ³ Visor"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "Íàâóêîâûÿ ïðûêëàäàíí³"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Îô³ñíûÿ ïðàãðàìû: ïðàöýñàðû ñëîâࢠ(kword, abiword), ýëåêòðîíûÿ òàáë³öû, "
-"àãëÿäàëüí³ê³ pdf-ôàéëà¢, ³ ã.ä."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "À¢äû¸ñðîäê³: ïðàéãðàâàëüí³ê³ mp3 ³ midi, ì³êøàðû ³ ã.ä."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "í³ã³ ³ Howto ïà Linux ³ Free Software"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "KDE Workstation"
-msgstr "Íàâóêîâûÿ ïðûêëàäàíí³"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Ìóëüòûìåäûÿ - â³äýà"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Íàáîð ³íñòðóìåíòࢠäëÿ ïîøòû, íàâ³íà¢, web'ó, ïåðàäà÷û ôàéëà¢, ³ chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Öi æàäàåöå ïðàòýñöiðàâàöü íàñòðîéêi?"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Ìóëüòûìåäûÿ - ãóê"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Óö³ë³òû"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Documentation"
-msgstr "À¢òýíòûôiêàöûÿ"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Êàíñîëüíûÿ ³íñòðóìåíòàëüíûÿ ñðîäê³"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Íàñòðîéêà çëó÷ýííÿ ç Iíòýðíýòàì"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Ìóëüòûìåäûÿ - ãóê"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Íàñòðîéêà"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Øìàò ãðàô³÷íûõ ìýíàäæýðࢠÏðàöî¢íûõ ñòàëî¢(Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"The K Desktop Environment - àñíî¢íàå ãðàô³÷íàå àñÿðîäçå ç êàëåêöûÿé "
-"³íñòðóìåíòàëüíûõ ñðîäêà¢"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Development"
-msgstr "ðàñïðàöî¢ø÷ûê"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "²íñòðóìåíòàëüíûÿ ñðîäê³ ñòâàðýíüíÿ CD"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "Íàâóêîâûÿ ïðûêëàäàíí³"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Ãðàô³÷íûÿ ïðàãðàìû òûïó The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Á³áë³ÿòýê³ ³ ïðàãðàìû äëÿ ðàñïðàöî¢ê³ íà Ñ ³ Ñ++"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Ñåòêàâû ïðûíòýð (socket)"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Ìóëüòûìåäûÿ - ãóê"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Ðýäàêòàðû ³ ïðàéãðàâàëüí³ê³ â³äýà"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Ìóëüòûìåäûÿ - Ãðàô³êà"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Çàáà¢ëÿëüíûÿ ïðàãðàìû: àðêàäû, ñòðàòýã³³ ³ ã.ä."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Ïðûêëàäàíí³ äëÿ ÷ûòàííÿ ³ àäïðà¢ê³ ïîøòû ³ íàâ³íࢠ(pine, mutt,  tin...), "
-"Web àãëÿäàëüí³ê³"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Àðõ³âàòàðû, ýìóëÿòàðû, ìàí³òîðûíã"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Ïåðñàíàëüíûÿ ô³íàíñû"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Ãðàô³÷íàå àñÿðîäçå ñà çðó÷íûì äçåëÿ âûêàðûñòàííÿ íàáîðàì ïðûêëàäàííÿ¢ ³  "
-"³íñòðóìåíòàëüíûõ ñðîäêà¢"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Íàñòðîéêà çëó÷ýííÿ ç Iíòýðíýòàì"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Ðýäàêòàðû ³ ïðàéãðàâàëüí³ê³ ãóêó ³ â³äýà"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "²íøûÿ ãðàô³÷íûÿ Ïðàöî¢íûÿ ñòàëû"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Ðýäàêòàðû, àáàëîíê³, òýðì³íàëû"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Ïðàãðàìû ê³ðàâàííÿ âàøûì³ ô³íàíñàì³, òûïó gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Çàáàâû"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Ìýíàäæàð àñàá³ñòàé ³íôàðìàöû³"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Ìóëüòûìåäûÿ - Ñòâàðýííå CD"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Íàâóêîâûÿ ïðûêëàäàíí³"
-
-#, fuzzy
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Öi æàäàåöå ïðàòýñöiðàâàöü íàñòðîéêi?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Âû çãîäíûÿ?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Êàëi âû íå âåäàåöå äàêëàäíà, äûê çâû÷àéíûì âûáàðàì ç'ÿ¢ëÿåööà \"/dev/hda"
-#~ "\"\n"
-#~ "(ïåðøàñíû ìàéñòàð IDE äûñê) öi \"/dev/sda\" (ïåðøû SCSI äûñê)."
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Òóò çìÿø÷àþööà ÷ýðãi äðóêó.\n"
-#~ "Âû ìîæàöå äàäàöü ÿø÷ý, àëüáî çìÿíiöü iñíóþ÷ûÿ."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Iìÿ çëó÷ýííÿ"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Àáÿðûöå àñíî¢íàãà êàðûñòàëüíiêà:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Êàë³ ëàñêà, çðàá³öå íåêàëüê³ ðóõࢠìûøøó."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Âû ïàâ³ííû ïðûíÿöü óìîâû ë³öýíç³³, êàá ïðàöÿãíóöü óñòàëÿâàíüíå.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ ëàñêà, íàö³ñí³öå \"Ïðûíÿöü\", êàë³ âû çãîäíûÿ ç óìîâàì³ ë³öýíç³³.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ ëàñêà, íàö³ñí³öå \"Àäâåðãíóöü\", êàë³ âû íå çãîäíûÿ ç óìîâàì³ "
-#~ "ë³öåíç³³.Óñòàëÿâàííå áóäçå ñêîí÷àíà\n"
-#~ "áÿç çìåíࢠâàøàé áÿãó÷àé êàíô³ãóðàöû³."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Àáÿðûöå ðàñêëàäêó ñâà¸é êëàâiÿòóðû ç ïðûâåäçåíàãà ñïiñó"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Êàë³ âû æàäàåöå êàá ïàñëÿ ¢ñòàëÿâàííÿ áûë³ äàñòóïíû ³íøûÿ ìîâû\n"
-#~ "(àêðàìÿ òîé, ÿêóþ âû ¢æî àáðàë³ íàïà÷àòêó ¢ñòàëÿâàííÿ), êàë³ "
-#~ "ëàñêààáÿðûöå\n"
-#~ "³õ ç âûøýé ïðûâåäçåíàãà ñï³ñó. Êàë³ âû æàäàåöå àáðàöü óñ¸ íàö³ñí³öå \"Óñå"
-#~ "\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Àáÿðûöå: \n"
-#~ "\n"
-#~ "  - Ïà âûáàðó: Ãýòû ðýæûì ðýêàìåíäóåööà ¢ òûì âûïàäêó, êàëi âû "
-#~ "ïðàöàâàëi \n"
-#~ "    ðàíåé ç GNU/Linux, i çìîæàöå ñàìi âûáðàöü íåàáõîäíûÿ\n"
-#~ "    ïàêåòû i àáñòàëÿâàííå äëÿ âàøàãà êàìï'þòàðó. Ãëÿäçiöå íiæýé "
-#~ "ïàäðàáÿçíàñö³.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ýêñïåðò: Âûáàð ãýòàãà ðýæûìó ñâåä÷ûöü, øòî âû ñâàáîäíà âàëîäàåöå GNU/"
-#~ "Linux\n"
-#~ "    i æàäàåöå âûêàðûñòî¢âàöü âåëüìi äýòàë¸âàå ¡ñòàëÿâàííå. ßê i ¢ "
-#~ "âûïàäêó \n"
-#~ "    \"Ïà âûáàðó\"âàì ïàòðýáíà áóäçå âûáðàöü íåàáõîäíûÿ ïðàãðàìû i \n"
-#~ "    àáñòàëÿâàííå âàøàãà êàìïóòàðó.\n"
-#~ "    Êàëi ëàñêà, ÍÅ ÂÛÁIÐÀÉÖÅ ÃÝÒÛ ÐÝÆÛÌ, ÊÀËI ÍÅ ¡ÏÝ¡ÍÅÍÛ, ØÒÎ ÐÎÁIÖÅ "
-#~ "ÏÐÀÂIËÜÍÀ!"
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Çàðàç âû ìàæàöå âûá³ðàöü ³íäûâ³äóàëíà óñå ïàêåòû, ÿê³ÿ æàäàåöå\n"
-#~ "óñòàëÿâàöü.\n"
-#~ "\n"
-#~ "\n"
-#~ "Âû ìîæàöå ðàçãîðòâàöü ³ çãàðòàöü äðýâà ïàêåòà¢, íàö³ñêàþ÷û íàîïöû³\n"
-#~ "ó ëåâûì êóöå âàêíà ïàêåòà¢.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ âû æàäàåöå áà÷ûöü ïàêåòû ó àëôàâ³òíûì ïàðàäêó, íàö³ñí³öå îïöûþ\n"
-#~ "\"Ñàðòûðàâàöü\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ âû íå æàäàåöå àòðûìë³âàöü ïàïÿðýäæàíí³ àäíîñíà çàëåæíàñöÿ¢, \n"
-#~ "íàö³ñí³öå \"Çàëåæíàñö³ à¢òàìàòû÷íà\". Êàë³ âû çðîá³öå ãýòà, çà¢âàæöå, "
-#~ "øòî\n"
-#~ "øòî íå âûáàð àäíàãî ïàêåòó âÿäçå äà íåìàã÷ûìàñö³ âûáðàöü ïàêåòû,\n"
-#~ "ÿê³ÿ àä ÿãî çàëåæàöü."
-
-#, fuzzy
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Êàëi âû ìàåöå ¢ñå CD äûñêi ñà ñïiñà íiæýé, íàöiñíiöå Îê.\n"
-#~ "Êàëi âû íå ìàåöå àíi âîäíàãà ç ãýòûõ CD äûñêà¢, íàöiñíiöå Àäìÿíiöü.\n"
-#~ "Êàëi íåêàòîðûõ ç CD äûñêࢠíå ìàåöå, àäìÿíiöå iõ âûäçÿëåííå i íàöiñíiöå "
-#~ "Îê."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Êàë³ âû æàäàåöå ïàäêëþ÷ûöü âàø êîìï'þòàð äà Internet ö³ ËÂÑ, êàë³ ëàñêà,\n"
-#~ "àáÿðûöå ïðàâ³ëüíóþ îïöûþ. Óêëþ÷ûöå âàøó ïðûëàäó ïåðàä âûáàðàì ïðàâ³ëüíàé "
-#~ "îïöû³, DrakXçíîéäçå ãýòà\n"
-#~ "à¢òàìàòû÷íà\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ âàì íå ïàòðýáíà ïàäêëþ÷ýííå äà Internet ö³ ËÂÑ, íàö³ñí³öå\n"
-#~ "\"Àäêëþ÷ûöü ïàäòðûìêó ñåòê³\".\n"
-#~ "Êàë³ âû æàäàåöå àäêàíô³ãóðàâàöü ñåòêó ïàñëÿ ¢ñòàëÿâàííÿ ö³ âû "
-#~ "¢æîñêîí÷ûë³\n"
-#~ "ÿå êàíô³ãóðàâàííå, íàö³ñí³öå \"Âûêàíàöü\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Ìàäýì íå çíîéäçåíû. Àáÿðûöå ïàñëÿäî¢íû ïîðò äà ÿêîãà ¸í ïàäêëþ÷àíû.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ïåðøû ïàñëÿäî¢íû ïîðò (çâàíû \"COM1\" ó Microsoft Windows) çàâåööà\n"
-#~ "\"ttyS0\" ó Linux."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Çàðàç âû ìîæàöå ¢âåñö³ ïàðàìåòðû àääàëåíàãà ïàäëþ÷ýííÿ.\n"
-#~ "Êàë³ âû íå âåäàåöå ö³ íå ¢ïý¢íåíû øòî òðýáà ¢âåñö³, ñïûòàéöåñÿ ó "
-#~ "ñâàéãî²nternet\n"
-#~ "ïðàâàéäýðó. Êàë³ âû íå ¢âîäç³öå ³íôàðìàöûþ àá DNS ñåðâåðàõ, ÿíà áóäçå \n"
-#~ "àòðûìàíà ïàä ÷àñ çëó÷ýííÿ ç âàøûì Internet-ïðàâàéäýðàì."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Êàë³ ¢ âàñ âîíêàâû ìàäýì, êàë³ ëàñêà, óêëþ÷ûöå ÿãî, ³ ïîòûì DrakXçíîéçå "
-#~ "ÿãî à¢òàìàòû÷íà."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Êàë³ ëàñêà, óêëþ÷ûöå ìàäýì ³ àáÿðûöå ïðàâ³ëíû."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Êàë³ âû íå óïý¢íåíû, ö³ ç'ÿ¢ëÿåööà âûøýé ïðûâåäçåíàÿ\n"
-#~ "³íôàðìàöûÿ êàðýêòíàé ö³ âû íå âåäàåöå àëüáî íÿ¢ïý¢íåíûÿ øòî òðýáà óâåñö³\n"
-#~ "ïðàâèëüíàÿ\n"
-#~ "³íôàðìàöûÿ ìîæà áûöü àòðûìàíà àä âàøàãà ïðàâàéäýðó Internet. Êàë³ âû íå\n"
-#~ "¢âîäç³öå ³íôàðìàöûþ àá DNS, ãýòàÿ ³íôàðìàöûÿ áóäçå àòðûìàíà àä âàøàãà\n"
-#~ "ïðàâàéäýðó ïàä ÷àñ çëó÷ýííÿ."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Çàðàç ìîæíà ¢âåñöi ïàðàìåòðû çëó÷ýííÿ ïðàç ìàäýì (dialup). Êàëi âû\n"
-#~ "íå âåäàåöå, øòî ïàòðýáíà ïiñàöü,\n"
-#~ "ïàñïðàáóéöå àòðûìàöü äàêëàäíóþ iíôàðìàöûþ ¢ ñâàéãî ïðàâàéäýðó Internet "
-#~ "(ISP)."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Êàë³ íåàáõîäíà, âû ìàæàöå óâåñö³ ³ìÿ âàøàãà õàñòà. Êàë³ âû\n"
-#~ "íå âåäàåöå ö³ íå ¢ïå¢íåíûÿ, øòî òðýáà ¢âàäç³öü. Ïàê³íöå ïîëå ïóñòûì."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Êàë³ íåàáõîäíà, âû ìàæàöå óâåñö³ ³ìÿ âàøàãà õàñòà. Êàë³ âû\n"
-#~ "íå âåäàåöå ö³ íå ¢ïå¢íåíûÿ, øòî òðýáà ¢âàäç³öü. Ïàê³íöå ïîëå ïóñòûì."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Çàðàç ìîæíà ¢âåñöi ïàðàìåòðû çëó÷ýííÿ ïðàç ìàäýì (dialup). Êàëi âû\n"
-#~ "íå âåäàåöå, øòî ïàòðýáíà ïiñàöü,\n"
-#~ "ïàñïðàáóéöå àòðûìàöü äàêëàäíóþ iíôàðìàöûþ ¢ ñâàéãî ïðàâàéäýðó Internet "
-#~ "(ISP)."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Êàëi âû çáiðàåöåñÿ âûêàðûñòî¢âàöü proxy, iõ àäðàñû ìîæíà ¢âåñöi çàðàç.\n"
-#~ "Êàëi âû íå âåäàåöå, àá ÷ûì iäçå ðàçìîâà, çâÿðíiöåñÿ äà àäìiíiñòðàòàðà\n"
-#~ "ñåòêi öi äà Internet-ïðàâàéäýðó."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Çàðàç âû ìîæàöå àáðàöü ÷àñàâû ïîÿñ çãîäíà ç ìåñöàì æûõàðñòâà."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Âû ìîæàöå êàíô³ãóðàâàöü ëàêàëüíû ïðûíòýð (çëó÷àíû ç âàøûì êàìï'þòàðàì)\n"
-#~ "ö³ àääàëåíû ïðûíòýð (äàñòóïíû ïðàç Unix, Netware ö³ ñåòêó MS Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Êàë³ âû æàäàåöå ìåöü äðóê, êàë³ ëàñêà, àáÿðûöå àäíó ç ñ³ñòýìࢠäðóêó\n"
-#~ "CUPS ö³ LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS ãýòà íîâàÿ, ìàãóòíàÿ ³ ãíóòêàÿ ñ³ñòýìà äðóêó äëÿ Unix ñ³ñòýìࢠ"
-#~ "(CUPS\n"
-#~ "- \"Common Unix Printing System\"). Ãýòà ñ³ñòýìà äðóêó ïà çìî¢÷àííþ¢\n"
-#~ "àïåðàöûéíàé ñ³ñòýìå Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR - ñòàðàÿ ñ³ñòýìà äðóêó ¢ ïàïÿðýäí³õ âåðñ³ÿõ äûñòðûáþòûâóMandrake "
-#~ "Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ âû íå ìàåöå ïðûíòýðó, íàö³ñí³öå \"Íÿìà\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux ìîæà ïðàöàâàöü ñà øìàòë³ê³ì³ òûïàì³ ïðûíòýðà¢. Êîæíû ç êàòîðûõ\n"
-#~ "ïàòðàáóå ðîçíàå ¢ñòàëÿâàííå.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ ïðûíòàð ô³ç³÷à ïàäêëþ÷àíû äà êàìï'þòåðó, àáÿðûöå \"Ëàêàëüíû\n"
-#~ "ïðûíòýð\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ ïðûíòàð ïàäêëþ÷àíû äà àääàëåíàé Unix ìàøûíû, àáÿðûöå\n"
-#~ "\"Àääàëåíû ïðûíòýð\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ ïðûíòýð ïàäêëþ÷àíû äà àääàëåíàé ìàøûíû Microsoft Windows (ö³ äà "
-#~ "Unix\n"
-#~ "ìàøûíû, ÿêàÿ âûêàðûñòî¢âàå ïðàòàêîë SMB), àáÿðûöå \"SMB/Windows 95/98/NT"
-#~ "\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Êàë³ ëàñêà ¢êëþ÷ûöå âàø ïðûíòàð ïåðàä ïðàöÿãàì,³ DrakX çíîéäçå ÿãî.\n"
-#~ "\n"
-#~ "Âû ïàâ³ííû ¢âåñüö³ íåêàòîðóþ ³íôàðìàöûþ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ²ìÿ ïðûíòýðó: ÷àðãà ïðûíòýðó âûêàðûñòî¢âàå ïà çìî¢÷àííþ ³ìÿ \"lp\"ÿê "
-#~ "³ìÿ ïðûíòýðó\n"
-#~ "Òàê, âû ïàâ³ííû ìåöü ïðûíòàð çâàíû \"lp\".\n"
-#~ "     Êàë³ âû ìàåöå òîëüê³ àäç³í ïðûíòàð, âû ìîæàöå ìåöü äëÿ ÿãî "
-#~ "íåêàëüê³íàçâà¢. Âû òîëüê³ ïàâ³ííû àääçÿë³öü ³õ ë³÷áàé êàíàëó ( \"|\").\n"
-#~ "     Òàê, êàë³ ëþá³öå áîëüø ³íôàðìàöûéíûÿ íàçâû, âû ïàâ³ííû óñòàâà³öü "
-#~ "ñïÿðøà ÿå , ïðûêë.: \"My printer|lp\".\n"
-#~ "     Ïðûíòýð ç ³ìåì \"lp\" áóäçå çàäàäçåíû ïðûíòýðàì ïà çìî¢÷àííþ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Àï³ñàííå: ãýòà íåàáàâÿçêîâà, àëå ìîæà áûöü êàðûñíà, êàë³ íåêàëüê³ "
-#~ "ïðûíòýðࢠçëó÷àíû çâàøûì êàìï'þòåðàì ö³ âû íå\n"
-#~ "     äàçâàëÿåöå äîñòóï ³íøûì êàìï'þòåðàì äà ãýòàãà ïðûíòýðó.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Ðàçìÿø÷ýííå: êàë³ âû æàäàåöå ðàçìÿñöiöü ïý¢íóþ ³íôàðìàöûþ àäíîñíà\n"
-#~ "     ðàçìÿø÷ýííÿ ïðûíòýðà, óñòà¢öå ÿå ñþäû (âû âîëüíûÿ ï³ñàöü óñ¸ øòî\n"
-#~ "     çà¢ãîäíà, íàïðûêëàä \"2nd floor\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Òóò âû ïàâ³ííû óâåñö³ íåêàòîðóþ ³íôàðìàöûþ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ²ìÿ ÷àðã³: âûêàðûñòî¢âàåööà \"lp\" ÿê ³ìÿ ïðûíòýðó ïà çìî¢÷àííþ. "
-#~ "Òàê, âû ïàâ³ííû ìåöü ïðûíòýð çâàíû \"lp\".\n"
-#~ "     Êàë³ âû ìàåöå òîëüê³ àäç³í ïðûíòàð, âû ìîæàöå ìåöü äëÿ ÿãî "
-#~ "íåêàëüê³íàçâà¢. Âû òîëüê³ ïàâ³ííû àääçÿë³öü ³õ ë³÷áàé êàíàëó ( \"|\").\n"
-#~ "     Òàê, êàë³ ëþá³öå áîëüø ³íôàðìàöûéíûÿ íàçâû, âû ïàâ³ííû óñòàâà³öü "
-#~ "ñïÿðøà ÿå , ïðûêë.: \"My printer|lp\".\n"
-#~ "     Ïðûíòýð ç ³ìåì \"lp\" áóäçå çàäàäçåíû ïðûíòýðàì ïà çìî¢÷àííþ.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Äûðûêòîðûÿ spool: ó ¸é çíàõîäçÿööà çàìîâû íà âûêàíàííå äðóêó. "
-#~ "Çàõàâàéöå àáðàíàå\n"
-#~ "     ïà çìî¢÷àííþ, êàë³ íå âåäàåöå ÿê ãýòûì êàðûñòàööà.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Ïàäêëþ÷ýííå ïðûíòýðó: êàë³ ïðûíòýð ô³ç³÷íà çëó÷àíû ç êàìï'þòåðàì, "
-#~ "àáÿðûöå \"Ëàêàëüíû ïðûíòýð\".\n"
-#~ "     Êàë³ ïðûíòýð ïàäêëþ÷àíû äà àääàëåíàé Unix ìàøûíû, àáÿðûöå \"Àääàëåíû "
-#~ "lpd ïðûíòýð\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Êàë³ âû ïðûíòýð ïàäêëþ÷àíû äà àääàëåíàé ìàøûíû MS Windows (ö³ äà "
-#~ "Unix ìàøûíû, ÿêàÿ âûêàðûñòî¢âàå ïðàòàêîë SMB,\n"
-#~ "     àáÿðûöå \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Êàë³ ïðûíòàð ïàäêëþ÷àíû äà ñåòê³ NetWare, àáÿðûöå \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Âàø ïðûíòàð íå áû¢ çíîéäçåíû. Êàë³ ëàñêà ¢âÿäç³öå ³ìÿ ïðûëàäû äà ÿêîé ¸í\n"
-#~ "ïàäêëþ÷àíû.\n"
-#~ "\n"
-#~ "\n"
-#~ "Áîëüøàñü ïðûíòàðࢠïàäêëþ÷àþööà äà ïåðøàãà ïàðàëåëüíàãà ïîðòó.¨í\n"
-#~ "çàâåööà \"/dev/lp0\" ó GNU/Linux ³ \"LPT1\" ó Microsoft Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Âû ïàâ³ííû àáðàöü âàø ïðûíòàð ñà ñï³ñó."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Êàë³ ëàñêà, àáÿðûöå ïðàâ³ëíûÿ îïöû³ ¢ àäïàâåäíàñüö³ âàøàìó ïðûíòàðó.\n"
-#~ "Êàë³ ëàñêà,ãëÿäç³öå äàêóìåíòàöûþ êàë³ íå âåäàåöå øòî àáðàöü.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ âû æàäàåöå, âû áóäçåöå çäîëüíûÿ ïðàòýñòàâàöü âàøóþ êàíô³ãóðàöûþ\n"
-#~ "íà íàñòóïíûì êðîêó ³ çüìÿí³öü ÿå."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Çàðàç âû ìîæàöå ñòâàðûöü àäçií àëüáî íåêàëüêi \"çâû÷àéíûõ\" óëiêîâûõ "
-#~ "çàïiñà¢\n"
-#~ "êàðûñòàëüíiêà¢. Äëÿ êîæíàãà êàðûñòàëüíiêà ìàã÷ûìà ñòâàðûöü ïà àäíàìó öi "
-#~ "íåêàëüêi\n"
-#~ "¢ëiêîâûõ çàïiñà¢. Äëÿ êîæíàãà ¢ëiêîâàãà çàïiñó ñòâàðàþööà ¢ëàñíûÿ "
-#~ "íàñòðîéêi\n"
-#~ "(ãðàôi÷íàå àññÿðîääçå, íàñòðîéêi ïðàãðàì,...) i ¢ëàñíû \"õàòíi êàòàëàã"
-#~ "\",\n"
-#~ "ó ÿêiì çàõî¢âàþööà ãýòûÿ íàñòðîéêi.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ïà-ïåðøàå, ñòâàðûöå ¢âàõîä äëÿ ñÿáå! Íàâàò êàëi âû áóäçåöå àäçiíûì\n"
-#~ "êàðûñòàëüíiêàì ãýòàé ìàøûíû, íå ðýêàìåíäóåööà óâàõîäçiöü ç ïðàâàìi\n"
-#~ "ñóïåðêàðûñòàëüíiêó äëÿ øòîäç¸ííàé ïðàöû: ãýòà çàíàäòà âÿëiêàÿ ïàãðîçà\n"
-#~ "áÿñïåêi. Ìàã÷ûìà çíiø÷ûöü ñiñòýìó çâû÷àéíàé ïàìûëêàé äðóêó.\n"
-#~ "\n"
-#~ "\n"
-#~ "Òàìó ¢âàõîäçiöü ó ñiñòýìó íåàáõîäíà ç ïðàâàìi çâû÷àéíàãà êàðûñòàëüíiêó,\n"
-#~ "ÿêîãà âû çàðàç i ñòâîðûöå, à ¢âàõîäçiöü ç ïðàâàìi root íåàáõîäíà òîëüêi\n"
-#~ "ç ìýòàìi àäìiíiñòðûðàâàííÿ i àáñëóãî¢âàííÿ ñiñòýìû."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Ñòâàðýííå boot äûñêó ñòðîãà ðýêàìåíäàâàíà! Êàë³ âû íå çìîæàöå\n"
-#~ "çàãðóç³öü âàø êàìï'þòàð, äûê ãýòà âàø àäç³íû ñïîñàá àäíàâ³öü\n"
-#~ "ñ³òýìû áåç åéíàãà ïåðà¢ñòàëÿâàíüíÿ."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Àñíî¢íûÿ ïàðàìåòðû SILO:\n"
-#~ "  - Óñòàëÿâàííå çàãðóç÷ûêó: Àáÿðûöå ìåñöà, äçå âû æàäàåöå çìåñöiöü\n"
-#~ "iíôàðìàöûþ, ïàòðýáíóþ äëÿ çàãðóçêi GNU/Linux. Êàëi íå ¢ïý¢íåíû, øòî\n"
-#~ "ðîáiöå ïðàâiëüíà, àáÿðûöå \"Ïåðøû ñåêòàð äûñêà (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Çàòðûìêà ïà çìî¢÷àííþ ïåðàä çàãðóçêàé âîáðàçó: Çàäàå ÷àñ ó äçÿñÿòûõ\n"
-#~ "ñåêóíäû, íà ïðàöÿãó ÿêîãà çàãðóç÷ûê ÷àêàå ïåðàä çàãðóçêàé âîáðàçó ïà "
-#~ "çìî¢÷àííþ.\n"
-#~ "Ãýòû ïàðàìåòàð êàðûñíû äëÿ ñiñòýìà¢, ÿêiÿ àäðàçó çàãðóæàþööà ç æîðñòêàãà\n"
-#~ "äûñêó àäðàçó àïàñëÿ ¢êëþ÷ýííÿ êëàâiÿòóðû. Çàãðóç÷ûê íå ÷àêàå, êàëi "
-#~ "\"çàòðûìêà\"\n"
-#~ "\"çàòðûìêà\" íå áóäçå ïàçíà÷àíà öi óñòàëÿâàíà íà íîëü."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO - ãýòû çàãðóç÷ûê äëÿ SPARC. ¨í ìîæà çàãðóçiöü äðóãóþ\n"
-#~ "GNU/Linux öi ëþáóþ iíøóþ àïåðàöûéíóþ ñiñòýìó, óñòàëÿâàíóþ íà êàìïóòàðû.\n"
-#~ "Çâû÷àéíà, ãýòûÿ iíøûÿ àïåðàöûéíûÿ ñiñòýìû êàðýêòíà âûçíà÷àþööà i\n"
-#~ "¢ñòà븢âàþööà. Êàëi ãýòà íå àòðûìàëàñÿ, òî âû ìîæàöå äàäàöü ëþáû çàïiñ\n"
-#~ "ñàìàñòîéíà. Áóäçüöå ¢ïý¢íåíû, øòî âû çàäàëi êàðýêòíûÿ ïàðàìåòðû.\n"
-#~ "\n"
-#~ "\n"
-#~ "Òàêñàìà âû ìîæàöå ïàæàäàöü i íå äàäâàöü iíøûÿ àïåðàöûéíûÿ ñiñòýìû.\n"
-#~ "Ó òàêiì âûïàäêó ïàòðýáíà âûäàëiöü àäïàâåäíûÿ çàïiñû. Àëå æ òàäû âàì \n"
-#~ "áóäçå ïàòðýáíû iíñòàëÿöûéíû äûñê, êàá çàãðóçiööà."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Àñíî¢íûÿ ïàðàìåòðû SILO:\n"
-#~ "  - Óñòàëÿâàííå çàãðóç÷ûêó: Àáÿðûöå ìåñöà, äçå âû æàäàåöå çìåñöiöü\n"
-#~ "iíôàðìàöûþ, ïàòðýáíóþ äëÿ çàãðóçêi GNU/Linux. Êàëi íå ¢ïý¢íåíû, øòî\n"
-#~ "ðîáiöå ïðàâiëüíà, àáÿðûöå \"Ïåðøû ñåêòàð äûñêà (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Çàòðûìêà ïà çìî¢÷àííþ ïåðàä çàãðóçêàé âîáðàçó: Çàäàå ÷àñ ó äçÿñÿòûõ\n"
-#~ "ñåêóíäû, íà ïðàöÿãó ÿêîãà çàãðóç÷ûê ÷àêàå ïåðàä çàãðóçêàé âîáðàçó ïà "
-#~ "çìî¢÷àííþ.\n"
-#~ "Ãýòû ïàðàìåòàð êàðûñíû äëÿ ñiñòýìà¢, ÿêiÿ àäðàçó çàãðóæàþööà ç æîðñòêàãà\n"
-#~ "äûñêó àäðàçó àïàñëÿ ¢êëþ÷ýííÿ êëàâiÿòóðû. Çàãðóç÷ûê íå ÷àêàå, êàëi "
-#~ "\"çàòðûìêà\"\n"
-#~ "\"çàòðûìêà\" íå áóäçå ïàçíà÷àíà öi óñòàëÿâàíà íà íîëü."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Çàðàç ìàã÷ûìà íàñòðîiöü X Window System, ÿêàÿ ç'ÿ¢ëÿåööà\n"
-#~ "àñíîâàé Linux GUI (Ãðàôi÷íû Iíòýðôåéñ Êàðûñòàëüíiêà). Äçåëÿ ãýòàãà\n"
-#~ "ïàòðýáíà íàñòðîiöü âiäýàêàðòó i ìàíiòîð. Áîëüøàÿ ÷àñòêà ãýòûõ êðîêà¢\n"
-#~ "à¢òàìàòûçàâàíà, òàìó âàøà ïðàöà ìîæà çàêëþ÷àööà ¢ ïðàâåðöû\n"
-#~ "âûíiêࢠíàñòðîéêi i ïàäöâåðäæàííþ àáðàíûõ ïàðàìåòðࢠ:)\n"
-#~ "\n"
-#~ "Êàëi êàíôiãóðàâàííå çàâåðøûööà, áóäçå çàïóø÷àíû X  (êàëi âû íå\n"
-#~ "ïàïðîñiöå DrakX íå ðàáiöü ãýòàãà), êàá âû çìàãëi ïðàâåðûöü, öi çãîäíû\n"
-#~ "âû ç íàñòðîéêàìi. Êàëi íå, òî çà¢ñ¸äû ìàã÷ûìà âÿðíóööà i çìÿíÿöü iõ\n"
-#~ "êîëüêi âàì ïàòðýáíà."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Êàëi íåøòà íå òàê ç íàñòðîéêàé X, ñêàðûñòàéöå ãýòûÿ ïàðàìåòðû äëÿ \n"
-#~ "êàðýêòíàé íàñòðîéêi X Window System."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Êàëi âû àääàåöå ïåðàâàãó ãðàôi÷íàìó ¢âàõîäó (login), àáÿðûöå \"Òàê\". "
-#~ "Iíàêø - \n"
-#~ "\"Íå\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Ñiñòýìà çáiðàåööà ïåðàçàãðóçiööà.\n"
-#~ "\n"
-#~ "Ïàñëÿ ïåðàçàãðóçêi, âàøà íîâàÿ ñiñòýìà Mandrake Linux çàãðóçiööà "
-#~ "à¢òàìàòû÷íà.\n"
-#~ "Êàëi âû æàäàåöå ïåðàçàãðóçiöà ïàä iíøóþ àïåðàöûéíóþ ñiñòýìó, ÷ûòàéöå \n"
-#~ "äàäàòêîâûÿ iíñòðóêöûi."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Çàïiñ /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "Àäíà¢ëåííå ç ôàéëó"
-
-#~ msgid "Save in file"
-#~ msgstr "Çàõàâàííå ¢ ôàéë"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Àäíà¢ëåííå ç äûñêåòû"
-
-#~ msgid "Format all"
-#~ msgstr "Ôàðìàòàâàöü óñ¸"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Ïàñëÿ ôàðìàòàâàííÿ ¢ñiõ ðàçäçåëà¢,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "óñå äàäçåíûÿ ¢ ãýòûõ ðàçäçåëàõ áóäóöü ñòðà÷àíû"
-
-#~ msgid "Reload"
-#~ msgstr "Ïåðàçàãðóçiöü"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Öi æàäàåöå âû ñòâàðûöü à¢òà¢ñòàë¸âà÷íû ôëîïi-äûñê äëÿ ðåïëiêàöûi linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Íàñòðîéêà ADSL"
-
-#, fuzzy
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Àääàëåíû CUPS ñåðâåð íå ïàòðàáóå àä Âàñ íàñòðîéê³ ïðûíòýðó\n"
-#~ "íà ãýòàé ìàøûíå, ¸í áóäçå çíîéäçåíû à¢òàìàòû÷íà.\n"
-#~ "Êàë³ Âû íå ¢ïý¢íåíû, àáÿðûöå \"Àääàëåíû ñåðâåð CUPS\"."
-
-#~ msgid "Remote queue"
-#~ msgstr "Àääàëåíàÿ ÷àðãà äðóêó"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Àääàëåíàÿ ÷àðãà äðóêó"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Iìÿ äàìåíó"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Iìÿ äðóêàðêi"
-
-#, fuzzy
-#~ msgid "start it"
-#~ msgstr "àáìåæàâàííå"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "Êàíôiãóðàöûÿ ñåòêi"
-
-#, fuzzy
-#~ msgid "Profile "
-#~ msgstr "ïàìûëêà ìàíöiðàâàííÿ: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Iìÿ çëó÷ýííÿ"
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "Äàëó÷ýííå äà Iíòýðíýòó"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Äàëó÷ýííå äà Iíòýðíýòó"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Äàëó÷ýííå äà Iíòýðíýòó"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Äàëó÷ýííå äà Iíòýðíýòó"
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "Iìÿ çëó÷ýííÿ"
-
-#, fuzzy
-#~ msgid "Color configuration"
-#~ msgstr "Íàñòðîéêà"
-
-#, fuzzy
-#~ msgid "Connect"
-#~ msgstr "Iìÿ çëó÷ýííÿ"
-
-#, fuzzy
-#~ msgid "Disconnect"
-#~ msgstr "Íàñòðîéêà ISDN"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Ïà äàìà¢ëåííþ"
-
-#~ msgid "Europe"
-#~ msgstr "Å¢ðîïà"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "Âûäàëiöü ÷àðãó äðóêó"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Íå àòðûìë³âàåööà àïðàöàâàöü çìåñò ôàéëà íàñòðîåê."
-
-#~ msgid "Disable network"
-#~ msgstr "Çðàáiöü íåàêòû¢íûì ñåòêàâàå çëó÷ýííå"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Çðàáiöü íåàêòû¢íûì ñåòêàâàå çëó÷ýííå"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Çàðàç âû ìîæàöå àäòýñòàâàöü âàøó ìûø. Íàö³ñêàéöå íà êíîïê³ ³\n"
-#~ "ðóøöå êîëà. Êàë³ óñòàëÿâàíí³ ïàìûëêîâûÿ íàö³ñí³öå \"Àäìåíà\" êàá "
-#~ "óñòàëÿâàöü\n"
-#~ "³íøû äðàéâåð."
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Ïîðò ìûøû"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Âû ìîæàöå âûçíà÷ûöü íà¢ïðîñò URI êàá äàëó÷ûööà äà äðóêàðêi ç CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Òàê, íàäðóêàâàöü ñòàðîíêó òýêñòó ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Òàê, íàäðóêàâàöü ñòàðîíêó òýêñòó PostScript"
-
-#~ msgid "Paper Size"
-#~ msgstr "Ïàìåðû ïàïåðû"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Âûøòóðõâàöü ïàïåðó ïàñëÿ äðóêó?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Ïàðàìåòðû äðàéâåðó Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Ïàðàìåòðû ãëûáiíi êîëåðó"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Äðóêàâàöü òýêñò ÿê PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Êàðýêòàâàöü ïðûñòóïêàâû òýêñò?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Íóìàð ñòàðîíêi àä êîëüêàñöi íàäðóêàâàíûõ ñòàðîíàê"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Ïðàâàå/ëåâàå ïàëi ¢ êðîïêàõ (1/72 äçþéìà)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Âåðõíÿå/Íiæíÿå ïàëi ¢ êðîïêàõ (1/72 äçþéìà)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Äàäàòêîâûÿ îïöûi GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Äàäàòêîâûÿ ïàðàìåòðû òýêñòó"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Àäâàðîòíû ïàðàäàê ñòàðîíàê"
-
-#, fuzzy
-#~ msgid "CUPS starting"
-#~ msgstr "×àêàåööà"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Âûáàð òûïó çëó÷ýííÿ ç àääàëåíûì ïðûíòýðàì"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Êîæíàÿ ÷àðãà äðóêó, ó ÿêóþ àäïðà¢ëÿþööà çàäàííi äëÿ äðóêó, ïàòðàáóå "
-#~ "ïàçíà÷ýííÿ iìÿ (çâû÷àéíà lp). Äðóãiÿ ïàðàìåòðû, òàêiÿ ÿê àïiñàííå "
-#~ "äðóêàðêi öi\n"
-#~ " ÿãî ðàçìåðêàâàííå, ìîãóöü áûöü ïàçíà÷àíû. ßêîå iìÿ äà äðàêóðêi âû "
-#~ "áóäçåöå\n"
-#~ "ñêàðûñòî¢âàöü i ÿê ãýòàÿ äðóêàðêà äàëó÷àåööà?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Êîæíàÿ ÷àðãà äðóêó, ó ÿêóþ àäïðà¢ëÿþööà çàäàííi äëÿ äðóêó, ïàòðàáóå "
-#~ "ïàçíà÷ýííÿ iìÿ (çâû÷àéíà lp) i ñïàëó÷àíàãà ç ¸þ êàòàëîãó ñïóëiíãó. "
-#~ "Ïàçíà÷öå iìÿ i êàòàëîã äëÿ ÷àðãi."
-
-#~ msgid "Name of queue"
-#~ msgstr "Iìÿ ÷àðãi äðóêó"
-
-#~ msgid "Spool directory"
-#~ msgstr "Äûðýêòîðûÿ ñïóëiíãó"
-
-#, fuzzy
-#~ msgid "Disable"
-#~ msgstr "Òàáëiöà"
-
-#, fuzzy
-#~ msgid "Enable"
-#~ msgstr "Òàáëiöà"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Êàá óçìàöíiöü áÿñïåêó ñiñòýìû, íåàáõîäíà àáðàöü \"Ñêàðûñòàöü ñõàâàíû ôàéë"
-#~ "\"\n"
-#~ "i \"Ñêàðûñòàöü ïàðîëi MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Êàëi ¢ âàøàé ñåòöû âûêàðûñòî¢âàåööà NIS, àáÿðûöå \"Ñêàðûñòî¢âàöü NIS\". "
-#~ "Êàëi\n"
-#~ "íå âåäàåöå, çàïûòàéöå àäìiíiñòðàòàðà ñåòêi."
-
-#~ msgid "yellow pages"
-#~ msgstr "æî¢òûÿ ñòàðîíêi"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Íàñòðîéêà ADSL"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1 ïðàâàéäàðó"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2 ïðàâàéäàðó"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "ßê âû ïëàíóåöå äàëó÷ûööà äà Iíòýðíýòó?"
-
-#, fuzzy
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "Íàñòðîéêà ADSL"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Àáÿðûöå ôàéë"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "ßêi òûï âàøàãà ISDN çëó÷ýííÿ?"
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "Íàñòðîéêà IDE"
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Íàñòðîéêà: Äàäàöü êðûíiöó"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr " Ãýòû ïóñêàâû ñêðûïò àäíà¢ëÿå ¢ñå ìîäóëi äëÿ usb ìûøû."
-
-#, fuzzy
-#~ msgid "Boot style configuration"
-#~ msgstr "Íàñòðîéêà ïàñëÿ ¢ñòàëÿâàííÿ"
-
-#, fuzzy
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Âàø êàìï'þòàð ìîæà áûöü ñêàíô³ãóðàâàíû íà ñóìåñíàå âûêàðûñòàííå\n"
-#~ " ²íòýðíýòó (Internet Connection Sharing)?\n"
-#~ "\n"
-#~ "Çà¢âàãà: âàì ïàòðýáíû ñåòêàâû àäàïòàð äëÿ ïàäêëþ÷ýííÿ äà ËÂÑ.\n"
-#~ "\n"
-#~ "Âû æàäàåöå óñòàëÿâàöü ñóìåñíû äîñòóï äà Internet?"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Ïðàâåðêà çàëåæíàñöÿ¢"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Íàñòðîéêà LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Ñòâàðûöü çàãð. äûñê"
-
-#~ msgid "Format floppy"
-#~ msgstr "Ôàðìàòàâàöü äûñêåòó"
-
-#~ msgid "Choice"
-#~ msgstr "Âûáàð"
-
-#, fuzzy
-#~ msgid "gMonitor"
-#~ msgstr "Ìàíiòîð"
-
-#, fuzzy
-#~ msgid "Firewall Configuration Wizard"
-#~ msgstr "Êàíôiãóðàöûÿ ñåòêi"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Ðîçíàå"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Äàäàòêîâûÿ ïûòàííi"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Íå ìàãó âûêàðûñòî¢âàöü ìàíöiðàâàííå ïðû âûñîêiì óçðî¢íi áÿñïåêi"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Çàñöÿðîãà: ÏÐÛ ÂÛÑÎÊIÌ ÓÇÐΡÍI ÁßÑÏÅÊI ¡ÂÀÕÎÄ ßÊ ROOT Ç ÊÀÍÑÎËI ÍÅ "
-#~ "ÄÀÇÂÀËßÅÖÖÀ!\n"
-#~ "Êàëi âû æàäàåöå ¢âàõîäçiöü ÿê root, óâàõîäçüöå ÿê êàðûñòàëüíiê, çàòûì \n"
-#~ "âûêîíâàéöå \"su\".Ó òàêiì âûïàäêó, ìîæàöå âûêàðûñòî¢âàöü ìàøûíó íå äëÿ "
-#~ "¢ñÿãî,\n"
-#~ "à òîëüêi ÿê ñåðâåð.\n"
-#~ "Ìàéöå íà ¢âàçå, øòî âû áûëi ïàïÿðýäæàíûÿ."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Áóäçüöå ¢âàæëiâû, óêëþ÷ýííå NumLock ìîæà ïðûâåñöi äà ïàìûëêîâàé\n"
-#~ "ïðàöû êëàâiÿòóðû (íàïðûêëàä, íàöiñê íà `p' äàå `6')."
-
-#, fuzzy
-#~ msgid "Actions"
-#~ msgstr "Ðàçìåðêàâàííå"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Íàâóêîâûÿ ïðûêëàäàíí³"
-
-#, fuzzy
-#~ msgid "toot"
-#~ msgstr "Root"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Ïåðøû ñåðâåð DNS"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Äðóãi ñåðâåð DNS:"
-
-#, fuzzy
-#~ msgid "using module"
-#~ msgstr "Ðýæûì çëó÷ýííÿ"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s óæî âûêàðûñòî¢âàåööà"
-
-#~ msgid "%s not found"
-#~ msgstr "Íå çíàéøëi %s"
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: Ãýòà íå êàðàí¸âû ðàçäçåë, êàëi ëàñêà àáÿðûöå iíøû."
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(ìîæà âûçâàöü çíiø÷ýííå äàäçåíûõ)"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (ïàñëÿäî¢íàÿ)"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Bus Mouse"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Äàäàöü êðûíiöó ïàêåòà¢"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Ïàñëÿ %s ðàçáåéöå %s,"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Ìàäýì Alcatel"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Óñå âûçíà÷àíûÿ ðàçäçåëû ïàâiííû áûöü àäôàðìàòàâàíû äëÿ âûêàðûñòàííÿ\n"
-#~ "(ôàðìàòàâàííå çíà÷ûöü ñòâàðýííå ôàéëàâàé ñiñòýìû). Ó ãýòàé ñiòóàöûi\n"
-#~ "ìîæíà ïåðàôàòàâàöü óæî iñíóþ÷ûÿ ðàçäçåëû äçåëÿ çíiø÷ýííÿ äàäçåíûõ,\n"
-#~ "ÿêiÿ çíàõîäçÿööà íà iõ. Çà¢âàãà: ôàðìàòàâàöü iñíóþ÷ûÿ ðàçäçåëû íå "
-#~ "àáàâÿçêîâà,\n"
-#~ "àñàáëiâà êàëi ÿíû çìÿø÷àþöü ôàéëû i äàäçåíûÿ, ÿêiÿ âû æàäàåöå çàõàâàöü.\n"
-#~ "Çâû÷àéíà çàõî¢âàþöü /home i /usr/local."
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB Ìûø"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB Ìûø (2 êíîïêi)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB Ìûø (3 êíîïêi öi áîëåé)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB Ìûø"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB Ìûø (2 êíîïêi)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB Ìûøü (3 êíîïêi öi áîëåé)"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Âû ¢ïý¢íåíû, øòî çìîæàöå ïðàöÿãíóöü ïðàöýñ óñòàëÿâàííÿ ÿê ýêñïåðò?\n"
-#~ "Ó ãýòûì âûïàäêó Âû áóäçåöå ìåöü áîëüøû êàíòðîëü íàä ïðàöýñàì "
-#~ "óñòàëÿâàííÿ,\n"
-#~ "àëå âûíiêi ïàìûëêi ìîãóöü áûöü ôàòàëüíûÿ.\n"
-#~ "\n"
-#~ "Âàì áóäóöü çàäàäçåíû, íàïðûêëàä, òàêiÿ ïûòàííi: ``Öi âûêàðûñòî¢âàöü "
-#~ "öåíÿâû\n"
-#~ "ôàéë ïàðîëÿ¢?'' Öi ïàäðûõòàâàíû âû äà àäêàçó íà ãýòûÿ ïûòàííi?"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "Çàðàç ìîæíà âûçíà÷ûöü, ÿêiÿ ðàçäçåëû âûêàðûñòî¢âàöü äëÿ ¢ñòàëÿâàííÿ\n"
-#~ "âàøàé ñiñòýìû Mandrake Linux, êàëi ÿíû ¢æî áûëi çàäàäçåíû (ïðû "
-#~ "ïàïÿðýäí³ì\n"
-#~ "¢ñòàëÿâàíí³ Linux àëüáî iíøàé ïðàöýäóðàé ðàçáiööÿ). Ó iíøûõ âûïàäêàõ\n"
-#~ "ðàçäçåëû æîðñòêàãà äûñêó ïàâiííû áûöü ïàçíà÷àíû. Ãýòà àïåðàöûÿ ñêëàäàåööà "
-#~ "ç\n"
-#~ "ëàãi÷íàãà ðàçáiööÿ äûñêàâàé ïðàñòîðû êàìï'þòýðó íà íåêàëüêi\n"
-#~ "âîáëàñöåé âûêàðûñòàííÿ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàëi âû ïëàíóåöå ñòâàðàöü íîâûÿ ðàçäçåëû, òàäû ìîæàöå ñêàðûñòàöü ðýæûì\n"
-#~ "\"À¢òà ðàçìÿø÷ýííå\", êàá à¢òàìàòû÷íà ñòâàðûöü ðàçäçåëû GNU/Linux. Âû "
-#~ "ìîæàöå\n"
-#~ "ïàçíà÷ûöü äûñê äëÿ ðàçáiööÿ, íàöiñíó¢øû íà \"hda\" äëÿ ïåðøàãà IDE "
-#~ "äûñêó,\n"
-#~ "\"hdb\" äëÿ äðóãîãà äûñêó öi \"sda\" äëÿ ïåðøàãà SCSI äûñêó i ã.ä.\n"
-#~ "\n"
-#~ "\n"
-#~ "Äâà çâû÷àéíûÿ ðàçäçåëû íàñòóïíûÿ: êàðýííû ðàçäçåë (/), ÿêi ç'ÿ¢ëÿåööà "
-#~ "ïà÷àòêîâûì\n"
-#~ "ïóíêòàì iåðàðõii êàòàëàãࢠôàéëàâàé ñiñòýìû, i /boot, ÿêi çìÿø÷àå ¢ñå\n"
-#~ "ôàéëû, íåàáõîäíûÿ äëÿ çàïóñêó àïåðàöûéíàé ñiñòýìû ïðû ¢êëþ÷ýííi "
-#~ "êàìï'þòýðó.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ïàêîëüêi âûíiêi ãýòàãà ïðàöýñó çâû÷àéíà íåçâàðîòíûÿ, ðàçáiöö¸ íà "
-#~ "ðàçäçåëû\n"
-#~ "ìîæà íàïàëîõàöü íàâi÷êà. DiskDrake ñïðàø÷àå ãýòû ïðàöýñ, òàìó íàïðóæàííå\n"
-#~ "ïàâiííà çíiìàööà. Ïàãëÿäçiöå äàêóìåíòàöûþ i ïàäðûõòóéöåñÿ àäðàçó.\n"
-#~ "\n"
-#~ "\n"
-#~ "Òàêñàìà ëþáóþ àïåðàöûþ íàä ðàçäçåëàì âû ìîæàöå âûêàíàöàü ç äàïàìîãàé\n"
-#~ "êëàâiÿòóðû, íàïðûêëàä ïåðàìÿø÷àööà ïàìiæ ðàçäçåëàìi ç äàïàìîãàé êëàâiøࢠ"
-#~ "Tab\n"
-#~ "i Up/Down. Êàëi ðàçäçåë àáðàíû, âû ìîæàöå âûêàðûñòî¢âàöü:\n"
-#~ "\n"
-#~ "- Ctrl-c  êàá ñòâàðûöü íîâû ðàçäçåë (êàëi ïàïÿðýäíå àáðàíû ïóñòû "
-#~ "ðàçäçåë)\n"
-#~ "\n"
-#~ "- Ctrl-d  êàá âûäàëiöü ðàçäçåë\n"
-#~ "\n"
-#~ "- Ctrl-m  êàá ïàçíà÷ûöü ïóíêò ìàíöiðàâàííÿ.\n"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "À¢òà³íñòàëÿöûÿ ôëîïi"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "À¢òàìàòû÷íàå âûçíà÷ýííå ïàìåðࢠýêðàíó"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "À¢òàìàòû÷íû ïîøóê ïàìåðࢠýêðàíó"
-
-#~ msgid "Available packages"
-#~ msgstr "Äàñòóïíûÿ ïàêåòû"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "Äðýííû ñòàðòàâû (kickstart) ôàéë %s (ïàìûëêà %s)"
-
-#~ msgid "Category"
-#~ msgstr "Êàòýãîðûÿ"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Ïðàãðàìû Chat (IRC or instant messaging), òûïó xchat, licq, gaim ³ ã.ä."
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Ïðàâåðêà çàëåæíàñöÿ¢"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "%s or %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Àáÿðûöå \"Óñòàëÿâàöü\", êàëi ¢ âàñ ÿø÷ý íå ¢ñòàëÿâàíà íi âîäíàé âåðñii\n"
-#~ "GNU/Linux, àëüáî, êàëi âû æàäàåöå âûêàðûñòî¢âàöü íåêàëüêi âåðñiÿ¢ öi "
-#~ "äûñòðûáóòûâà¢.\n"
-#~ "\n"
-#~ "Àáÿðûöå \"Âûðàòàâàöü\", êàëi âû æàäàåöå âûðàòàâàöü íåïðàöóþ÷óþ ïàïÿðýäíþþ "
-#~ "âåðñiþ Mandrake Linux:\n"
-#~ "%s àëüáî %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Àáÿðûöå:\n"
-#~ "\n"
-#~ "  - Ðýêàìåíäóåööà: Êàëi âû ðàíåé íiêîëi íå ¢ñòà븢âàëi \n"
-#~ "    GNU/Linux, âûáÿðûöå ãýòû ðýæûì.\n"
-#~ "\n"
-#~ "  - Ïà âûáàðó: Ãýòû ðýæûì ðýêàìåíäóåööà ¢ òûì âûïàäêó, êàëi âû "
-#~ "ïðàöàâàëi \n"
-#~ "    ðàíåé ç GNU/Linux, i çìîæàöå ñàìi âûáðàöü íåàáõîäíûÿ\n"
-#~ "    ïàêåòû i àáñòàëÿâàííå äëÿ âàøàãà êàìïóòàðó. Ãëÿäçiöå íiæýé "
-#~ "ïàäðàáÿçíàñö³.\n"
-#~ "\n"
-#~ "  - Ýêñïåðò: Âûáàð ãýòàãà ðýæûìó ñâåä÷ûöü, øòî âû ñâàáîäíà âàëîäàåöå GNU/"
-#~ "Linux\n"
-#~ "    i æàäàåöå âûêàðûñòî¢âàöü âåëüìi äýòàë¸âàå ¡ñòàëÿâàííå. ßê i ¢ "
-#~ "âûïàäêó\n"
-#~ "    \"Ïà âûáàðó\"âàì ïàòðýáíà áóäçå âûáðàöü íåàáõîäíûÿ ïðàãðàìû i \n"
-#~ "    àáñòàëÿâàííå âàøàãà êàìïóòàðó.\n"
-#~ "    Êàëi ëàñêà, ÍÅ ÀÁIÐÀÉÖÅ ÃÝÒÛ ÐÝÆÛÌ, ÊÀËI ÍÅ ¡ÏÝ¡ÍÅÍÛ, ØÒÎ ÐÎÁIÖÅ "
-#~ "ÏÐÀÂIËÜÍÀ!\n"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Àáÿðûöå \"Óñòàëÿâàöü\", êàëi ¢ âàñ ÿø÷ý íå ¢ñòàëÿâàíà íi àäíîé âåðñii\n"
-#~ "GNU/Linux, àëüáî, êàëi âû æàäàåöå âûêàðûñòî¢âàöü íåêàëüêi âåðñiÿ¢ öi "
-#~ "äûñòðûáóòûâà¢.\n"
-#~ "\n"
-#~ "Àáÿðûöå \"Âûðàòàâàöü\", êàëi âû æàäàåöå âûðàòàâàöü íåïðàöóþ÷óþ ïàïÿðýäíþþ "
-#~ "âåðñiþ Mandrake Linux:\n"
-#~ "\n"
-#~ "\n"
-#~ "Àáÿðûöå:\n"
-#~ "\n"
-#~ "  - Ðýêàìåíäóåööà: Êàëi âû ðàíåé íiêîëi íå ¢ñòà븢âàëi \n"
-#~ "    GNU/Linux, àáÿðûöå ãýòû ðýæûì.\n"
-#~ "\n"
-#~ "  - Ïà âûáàðó: Ãýòû ðýæûì ðýêàìåíäóåööà ¢ òûì âûïàäêó, êàëi âû "
-#~ "ïðàöàâàëi \n"
-#~ "    ðàíåé ç GNU/Linux, i çäîëååöå ñàìi âûáðàöü íåàáõîäíûÿ\n"
-#~ "    ïàêåòû i àáñòàëÿâàííå äëÿ âàøàãà êàìïóòàðó. Ãëÿäçiöå íiæýé "
-#~ "ïàäðàáÿçíàñö³.\n"
-#~ "\n"
-#~ "  - Ýêñïåðò: Âûáàð ãýòàãà ðýæûìó ñâåä÷ûöü, øòî âû ñâàáîäíà âàëîäàåöå GNU/"
-#~ "Linux\n"
-#~ "    i æàäàåöå âûêàðûñòî¢âàöü âåëüìi äýòàë¸âàå ¡ñòàëÿâàííå. ßê i ¢ "
-#~ "âûïàäêó \n"
-#~ "    \"Ïà âûáàðó\"âàì ïàòðýáíà áóäçå âûáðàöü íåàáõîäíûÿ ïðàãðàìû i \n"
-#~ "    àáñòàëÿâàííå âàøàãà êàìïóòàðó.\n"
-#~ "    Êàëi ëàñêà, ÍÅ ÀÁIÐÀÉÖÅ ÃÝÒÛ ÐÝÆÛÌ, ÊÀËI ÍÅ ¡ÏÝ¡ÍÅÍÛ, ØÒÎ ÐÎÁIÖÅ "
-#~ "ÏÐÀÂIËÜÍÀ!\n"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake\n"
-#~ "Linux: 5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1\n"
-#~ "(Helios) or Gold 2000."
-#~ msgstr ""
-#~ "Àáÿðûöå \"Óñòàëÿâàííå\", êàëi íÿìà ¢ñòàëÿâàíûõ ðàíåé âåðñ³ÿ¢ Linux,\n"
-#~ "àëüáî êàëi æàäàåöå âûêàðûñòî¢âàöü íåêàëüêi äûñòðûáóòûâࢠàëüáî âåðñûÿ¢.\n"
-#~ "\n"
-#~ "\n"
-#~ "Àáÿðûöå \"Àáíàâiöü\" êàëi âû æàäàåöå àáíàâiöü ïàïÿðýäíþþ âåðñiþ\n"
-#~ "Mandrake Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus),\n"
-#~ "6.1 (Helios) àëüáî Gold 2000."
-
-#~ msgid "Choose package to install"
-#~ msgstr "Âûáàð ïàêåòࢠäëÿ óñòàëÿâàííÿ"
-
-#~ msgid "Collapse all"
-#~ msgstr "Çãàðíóöü óñ¸"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Ñðîäê³ êàìóí³êàöûÿ¢"
-
-#~ msgid "Configure LAN"
-#~ msgstr "Íàñòðîéêà ñåòêi (ËÂÑ)"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Íàñòðîéêà ÷àñàâîãà ïîÿñó"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Ïàäöâåðäçiöü ïàðîëü"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Äàëó÷ûööà äà Iíòýðíýò ïðàç êàáåëü (ñåòêó)"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Äàëó÷ûööà äà iíòýðíýò ïðàç DSL (öi ADSL)"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Çëó÷ýííå ç iíòýðíýò ïà ISDN"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Çëó÷ýííå ç iíòýðíýò ïðàç çâû÷àéíû ìàäýì"
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "Íå àòðûìë³âàåööà ¢ñòàëÿâàöü RPM ``bind'' ç äàïàìîãàé urpmi."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr ""
-#~ "Íå àòðûìë³âàåööà ¢ñòàëÿâàöü RPM êýøóþ÷àãà ñåðâåðó ³ì¸íࢠç äàïàìîãàé "
-#~ "urpmi."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "Íå àòðûìë³âàåööà ¢ñòàëÿâàöü RPM ``dhcp'' ç äàïàìîãàé urpmi."
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "Íå àòðûìë³âàåööà ¢ñòàëÿâàöü RPM ``ipchains'' ç äàïàìîãàé urpmi."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "Íå àòðûìë³âàåööà ¢ñòàëÿâàöü RPM ``linuxconf'' ç äàïàìîãàé urpmi."
-
-#~ msgid "Cryptographic"
-#~ msgstr "Êðûïòàãðàôiÿ"
-
-#~ msgid "Customized"
-#~ msgstr "Ïà âûáàðó"
-
-#~ msgid "Czech"
-#~ msgstr "×åøñêi"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Ñåðâåðû ³ êë³åíòû áàçࢠäàäçåíûõ (mysql and postgresql)"
-
-#~ msgid "Directory"
-#~ msgstr "Êàòàëîã"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "Íå ¢ñòà븢âàöü ñåòêó"
-
-#~ msgid "Do you want to configure a ISDN connection for your system?"
-#~ msgstr "Öi æàäàåöå âû íàñòðîiöü ISDN çëó÷ýííå ¢ âàøàé ñiñòýìå?"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "Öi æàäàåöå âû íàñòðîiöü êàìóòàâàíàå çëó÷ýííå ïðàç ìàäýì äà ñiñòýìû?"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Öi æàäàåöå âû íàñòðîiöü ñåòêàâóþ êàíôiãóðàöûþ âàøàé ñiñòýìû?"
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "Çàãðóçêà êðûïòàãðàôi÷íûõ ïàêåòà¢"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX ñïà÷àòêó ïàñïðàáóå çíàéöi àäçií öi íåêàëüêi àäàïòýðࢠPCI\n"
-#~ "i SCSI. Êàëi àäàïòýð çíîéäçåí, i DrakX âÿäîìà, ÿêi äðàéâåð\n"
-#~ "äëÿ ÿãî ïàòðýáíû, ãýòàÿ ïðûëàäà áóäçå äàëó÷àíà à¢òàìàòû÷íà.\n"
-#~ "\n"
-#~ "Êàëi âû ìàåöå SCSI àäàïòýð íà ISA-, àëüáî PCI-êàðöå, àëå DrakX íå âåäàå\n"
-#~ "ÿêi äðàéâåð ñêàðûñòàöü ç ãýòàé êàðòàé, öi DrakX ëè÷ûöü, øòî âû íå ìàåöå\n"
-#~ "SCSI àäàïòýðࢠíàâîãóë, ó âàñ çàïûòàþöü, öi ¸ñöü ¸í ó âàñ àëüáî íå.\n"
-#~ "Êàëi ¢ âàñ ÿãî íÿìà, àäêàçâàéöå \"Íå\". Êàëi ¸ñòü àäçií öi íåêàëüêi,\n"
-#~ "àäêàçâàéöå \"Òàê\". Ïàñëÿ ãýòàãà ç'ÿâiööà ñïiñ äðàéâåðà¢, ç ÿêiõ âàì\n"
-#~ "ïàòðýáíà áóäçå âûáðàöü ïàäûõîäçÿ÷û.\n"
-#~ "\n"
-#~ "Ïàñëÿ âûáàðó äðàéâåðó, DrakX çàïûòàå, öi íå æàäàåöå âû çàäàöü\n"
-#~ "äëÿ ÿãî äàäàòêîâûÿ íàñòðîéêi. Ñïà÷àòêó íÿõàé äðàéâåð ïðàâåðûöü "
-#~ "àáñòàëÿâàííå:\n"
-#~ "çâû÷àéíà ¢ñ¸ ïðàöóå äîáðà.\n"
-#~ "\n"
-#~ "Ó àäâàðîòíûì âûïàäêó, íå çàáûâàéöåñÿ ïðà iíôàðìàöûþ àá àáñòàëÿâàííi, "
-#~ "ÿêóþ\n"
-#~ "ìîæíà àòðûìàöü àä Windows (êàëi ÿíà ïðûñóòíi÷àå ¢ âàøàé ñiñòýìå), à "
-#~ "òàêñàìà\n"
-#~ "ïðà äàïàìîæíiê ïà ¢ñòàíí³ ãýòàé ïðûëàäû. ßíû çìÿø÷àþöü òûÿ íàñòðîéêi, "
-#~ "ÿêiÿ\n"
-#~ "íåàáõîäíà çàäàöü äðàéâåðó."
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX ñòâîðûöü êàíôiãóðàöûéíûÿ ôàéëû äëÿ XFree 3.3 i XFree 4.0.\n"
-#~ "Ïà äàìà¢ëåííþ âûêàðûñòî¢âàåööà ñåðâåð 4.0. Êàëi Âàøà âiäýàêàðòà íå\n"
-#~ "ïàäòðûìëiâàåööà iì, òàäû ìîæíà âûêàðûñòàöü ñåðâåð 3.3.\n"
-#~ "Öi æàäàåööå âû ïàêiíóöü XFree 3.3 ¢ ñiñòýìå?"
-
-#~ msgid "ECI modem"
-#~ msgstr "Ìàäýì ECI"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Óêëþ÷ýííå num lock ïðû ñòàðöå"
-
-#~ msgid "End configuration"
-#~ msgstr "Çàêàí÷ýííå íàñòðîéêi"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "Óñòà¢öå äûñêåòó äëÿ çàïiñó çàãðóç÷ûêó ç HTP\n"
-#~ "(óñå äàäçåíûÿ íà ãýòàé äûñêåöå áóäóöü çíiø÷àíû)"
-
-#~ msgid "Everything configured!"
-#~ msgstr "¡ñ¸ ñêàíôiãóðàâàíà!"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "Óñ¸ ñêàíôiãóðàâàíà.\n"
-
-#~ msgid "Expand all"
-#~ msgstr "Ðàçãàðíóöü óñ¸"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "Íå àòðûìàëàñü ñòâàðûöü çàãð. äûñêåòó ç HTP.\n"
-#~ "Ìàã÷ûìà, ïàòðýáíà ïåðàçàïóñöiöü óñòàëÿâàííå ç ``%s'' ó çàïðàøýííi"
-
-#~ msgid "Find Package"
-#~ msgstr "Ïîøóê ïàêåòà¢"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Çíàéñöi ïàêåò, ÿêi ìàå ôàéë"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Ïîøóê ëiñòî¢"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Ïîøóê ëiñòî¢ ïàòðàáóå íåêàòîðû ÷àñ"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Äëÿ FTP i HTTP, âû ïàâiííû ïàçíà÷ûöü ðàçìÿø÷ýííå hdlist\n"
-#~ "Çàäàâàéöå àäíîñíà ðàíåé ïàçíà÷àíàãà URL"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Çàáûöü çìÿíåííi?"
-
-#~ msgid "France"
-#~ msgstr "Ôðàíöûÿ"
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "Linux ìîæà ïðàöàâàöü ñà øìàòëiêiìi òûïàìi äðóêàâàëüíûõ ïðûëàäà¢. Êîæíû ç "
-#~ "ãýòûõ\n"
-#~ "òûïࢠïàòðàáóå ðîçíàãà ¢ñòàëÿâàííÿ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàëi âàøà ïðûëàäà äëÿ äðóêàâàííÿ äàëó÷àíà íåïàñðýäíà äà ãýòàãà "
-#~ "êàìï'þòýðó,\n"
-#~ "àáÿðûöå \"Ëàêàëüíû ïðûíòýð\". Âàì áóäçå ïàòðýáíà âûçíà÷ûöü, äà ÿêîãà "
-#~ "ïîðòó\n"
-#~ "äàëó÷àíà ïðûëàäà i âûáðàöü ïàäûõîäçÿ÷û ôiëüòð.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàëi âû æàäàåöå àòðûìàöü äîñòóï äà ïðûíòýðó, ÿêi çíàõîäçiööà íà "
-#~ "àääàëåíàé\n"
-#~ "ìàøûíå Unix, íåàáõîäíà âûáðàöü \"Àääàëåíàÿ ÷àðãà lpd\". Êàá ïðûìóñiöü "
-#~ "ÿãî\n"
-#~ "ïðàöàâàöü, iìÿ i ïàðîëü íå ïàòðýáíû, àëå íåàáõîäíà âåäàöü iìÿ ÷àðãi "
-#~ "äðóêó\n"
-#~ "íà ãýòàì ñåðâåðû.\n"
-#~ "\n"
-#~ "\n"
-#~ "Äëÿ äîñòóïó äà ïðûíòýðó SMB (ÿêi çíàõîäçiööà íà àääàëåíàé ìàøûíå\n"
-#~ "Windows 9x/NT/2000 öi Unix ç ñåðâåðàì Samba), íåàáõîäíà âåäàöü ÿãî iìÿ\n"
-#~ "SMB (ÿêîå ìîæà íå ñóïàäàöü ç ÿãî iìåíåì ó ñåòêi TCP/IP), i, ìàã÷ûìà,\n"
-#~ "ÿãî IP àäðàñ i iìÿ êàðûñòàëüíiêó, ðàáî÷àé ãðóïû i ïàðîëü äîñòóïó äà\n"
-#~ "ïðûíòýðó, à òàêñàìà iìÿ ïðûíòýðó. Òîå æ ñàìàå i äëÿ ïðûíòýðó\n"
-#~ "NetWare, òîëüêi íå ïàòðàáóåööà iíôàðìàöûÿ àá ïðàöîóíàé ãðóïå."
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (ïàñëÿäî¢íàÿ)"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "Germany"
-#~ msgstr "Íÿìåöêi"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Íÿìåöêi (1TR6)"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Äàéöå iìÿ (íàïð.: `extra', `commercial')"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr ""
-#~ "Áóäçå ¢ñòàëÿâàíà %d Má. Ìîæíà àáðàöü áîëüø ïðàãðàìࢠäëÿ ¢ñòàëÿâàííÿ."
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Áóäçåì âûäàëÿöü ïóíêò %s"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "SILO çìÿø÷àå íàñòóïíûÿ ïóíêòû.\n"
-#~ "Âû ìîæàöå äàäàöü ÿø÷ý, àëüáî çìÿíiöü iñíóþ÷ûÿ."
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Ìîæíà ïàñïðàáàâàöü çíàéñöi äàñòóïíûÿ ïàìåðû ýêðàíó (íàïð.: 800x600).\n"
-#~ "Ó âåëüìi ðýäêiì âûïàäêó ãýòà ìîæà ïðûâåñöi äà ñïûíåííÿ êàìï'þòàðó .\n"
-#~ "Æàäàåöå ïàñïðàáàâàöü?"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Çíàéøëi ISDN êàðòó:\n"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr ""
-#~ "Íåàáõîäíà àäêàíôiãóðàâàöü âàøó ñåòêàâóþ êàðòó, êàá ìàã÷ûìà áûëî äàëó÷ûööà "
-#~ "äà Iíòýðíýòó."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Êàëi DrakX ïðàâiëüíà çíàéøî¢ âàøó ìûø, ïðîñòà âûáÿðûöå ç ìåíþ\n"
-#~ "iíøû ïóíêò. Ó ïðîöiëåãëûì âûïàäêó àáÿðûöå ïàäûõîäçÿ÷û âàðûÿíò\n"
-#~ "äðàéâåðó ìûøû ñà ñïiñó âûøýé.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ó âûïàäêó ìûøû, ÿêàÿ äàëó÷àíà äà ïàñëÿäî¢íàãà ïîðòó, âàì ïàòðàáóåööà "
-#~ "ïàâåäàìiöü\n"
-#~ "DrakX ïðàâiëüíû íóìàð ïàñëÿäî¢íàãà ïîðòó, äà ÿêîãà ÿíà äàëó÷àíà."
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "Êàëi âàø ADSL ìàäýì àäíà ç ìàäýëÿ¢ Alcatel, ïàçíà÷öå Alcatel. Ó iíøûì "
-#~ "âûïàäêó - ECI."
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "ßêàÿ êðàiíà âàøàãà ðàçìÿø÷ýííÿ?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Óñòàëÿâàííå/Âûðàòàâàííå"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "Óñòàëÿâàííå SILO íå àòðûìàëàñÿ. Óçíiêëà íàñòóïíàÿ ïàìûëêà:"
-
-#~ msgid "Installed packages"
-#~ msgstr "Óñòàëÿâàíûÿ ïàêåòû"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "Íåàáõîäíà ïåðàçàïóñöiöü óñòàëÿâàííå i çàãðóçiööà ç äûñêåòû"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "Íåàáõîäíà ïåðàçàïóñöiöü óñòàëÿâàííå ç íîâûìi ïàðàìåòðàìi"
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "Íàñòîéëiâà ðýêàìåíäóåì àäêàçàöü òóò \"Òàê\"! Âîñü íàïðûêëàä, êàëi âû\n"
-#~ "ïåðà¢ñòàëþåöå Windows, ÿíà ïåðàçàïiøà çàãðóçà÷íû ñåêòàð.\n"
-#~ "Êàëi âû íå ñòâàðûëi çàãðóçà÷íû äûñê, âû áîëüø íå çäîëååöå çàãðóçiöü\n"
-#~ "Linux!"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (ïàñëÿäî¢íàÿ)"
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (LInux LOader) ìîæà çàãðóæàöü Linux i iíøûÿ àïåðàöûéíûÿ ñiñòýìû.\n"
-#~ "Çâû÷àéíà ÿíû êàðýêòíà çíàõîäçÿööà ïðû ¢ñòàëÿâàíí³. Êàëi âû íå ¢áà÷ûëi\n"
-#~ "òûõ ñiñòýì, ÿêiÿ áûëi ¢ñòàëÿâàíû íà ìàøûíå, âû ìîæàöå äàäàöü çàðàç\n"
-#~ "àäíó ç iõ àëüáî íåêàëüêi.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàëi âû íå æàäàåöå, êàá óñå ìåëi äîñòóï äà àäíîé ç iõ, âûäàëiöå ÿå çàðàç\n"
-#~ "(äçåëÿ ÿå çàãðóçêi ïàòðàáóåööà çàãðóçà÷íû äûñê)."
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "Ëiíåéíà (íåàáõîäíà äëÿ íåêàòîðûõ àäàïòýðࢠSCSI)"
-
-#~ msgid ""
-#~ "Linux does not yet fully support ultra dma 66 HPT.\n"
-#~ "As a work-around i can make a custom floppy giving access the hard drive "
-#~ "on ide2 and ide3"
-#~ msgstr ""
-#~ "Linux ïàêóëü ÿø÷ý íå öàëêàì ïàäòðûìëiâàå ultra dma 66 HPT.\n"
-#~ "ßê âàðûÿíò, ìàãó ñòâàðûöü äûñêåòó, ÿêàÿ çàáÿñïå÷ûöü äîñòóï äà äûñêó íà "
-#~ "ide2 i ide3"
-
-#~ msgid "Local LAN"
-#~ msgstr "Ëàêàëüíàÿ ñåòêà"
-
-#~ msgid "Local Printer Device (URI)"
-#~ msgstr "Ëàêàëüíû ïðûíòýð (URI)"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Íàñòðîéêi ëàêàëüíàé ñåòêi óæî çàäàäçåíû.\n"
-#~ "Öi æàäàåöå Âû:"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech Bus Mouse"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (ïàñëÿäî¢íàÿ)"
-
-#~ msgid "Logitech MouseMan/FirstMouse (serial)"
-#~ msgstr "Logitech MouseMan/FirstMouse (ïàñëÿäî¢íàÿ)"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft Bus Mouse"
-
-#~ msgid "Microsoft IntelliMouse (serial)"
-#~ msgstr "Microsoft IntelliMouse (ïàñëÿäî¢íàÿ)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A àëüáî âûøåé (ïàñëÿäî¢íàÿ)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft ñóìÿñöiìàÿ (ïàñëÿäî¢íàÿ)"
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Ïàâåðí³öå êîëà ìûøû"
-
-#~ msgid "Multimedia"
-#~ msgstr "Ìóëüòûìåäûÿ"
-
-#~ msgid "Network:"
-#~ msgstr "Ñåòêà:"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "cdrom íåäàñòóïíû (íi÷îãà íÿìà ¢ /mnt/cdrom)"
-
-#~ msgid "No match"
-#~ msgstr "Íå çíîéäçåíà"
-
-#~ msgid "No more match"
-#~ msgstr "Áîëüø íå çíîéäçåíà"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Ïàäûõîäçÿ÷ûÿ ðýæûìû íå çíîéäçåíû.\n"
-#~ "Ïàñïðàáóéöå âûáðàöü iíøóþ âiäýàêàðòó öi ìàíiòîð"
-
-#~ msgid "Other countries"
-#~ msgstr "Iíøûÿ êðàiíû"
-
-#~ msgid "Package"
-#~ msgstr "Ïàêåò"
-
-#~ msgid "Password:"
-#~ msgstr "Ïàðîëü:"
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "ßêi ðàçäçåë äûñêà æàäàåöå âûêàðûñòî¢âàöü ó ÿêàñöi êàðàí¸âàãà?"
-
-#~ msgid ""
-#~ "Please choose which network adaptater do you want to use to connect to "
-#~ "internet.\n"
-#~ "If you don't know, choose eth0.\n"
-#~ msgstr ""
-#~ "Êàëi ëàñêà, ïàçíà÷öå ñåòêàâû àäàïòàð, ÿêi âû áóäçåöå âûêàðûñòî¢âàöü äçåëÿ "
-#~ "äàëó÷ýííÿ äà Iíòýðíýòó.\n"
-#~ "Êàëi íå âåäàåöå, ïàçíà÷öå eth0.\n"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Ïðàäñòà¢öå íàñòóïíóþ iíôàðìàöûþ"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Ïåðàêàíôiãóðàâàöü ëàêàëüíóþ ñåòêó"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Rescue"
-#~ msgstr "Âûðàòàâàííå"
-
-#~ msgid "SILO main options"
-#~ msgstr "Ãàëî¢íûÿ îïöûi SILO"
-
-#~ msgid "Sciences"
-#~ msgstr "Íàâóêîâàå"
-
-#~ msgid "Search"
-#~ msgstr "Ïîøóê"
-
-#~ msgid "Searching root partition."
-#~ msgstr "Ïîøóê êàðàí¸âàãà ðàäçåëà."
-
-#~ msgid "See"
-#~ msgstr "Ãë."
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Àáÿðûöå ïàæàäàíû ïàìåð óñòàëÿâàííÿ"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Àáÿðûöå:\n"
-#~ "\n"
-#~ "  - Ðýêàìåíäóåööà: Êàëi âû ðàíåé íiêîëi íå ¢ñòà븢âàëi Linux.\n"
-#~ "\n"
-#~ "  - Ïà âûáàðó: Êàëi âû çíà¸ìûÿ ç Linux, òî ìîæíà àáðàöü íàñòóïíûÿ \n"
-#~ "ñïîñàáû âûêàðûñòàííÿ ñiñòýìû: íàðìàëüíû, äëÿ ðàñïðàöî¢ø÷ûêà, àëüáî\n"
-#~ "ñåðâåð. Àáÿðûöå \"Çâû÷àéíû\" äëÿ ¢ñòàëÿâàííÿ ñiñòýìû àãóëüíàãà "
-#~ "ïðûçíà÷ýííÿ.\n"
-#~ "Ðýæûì \"Äëÿ ðàñïðàöî¢êi\" ïðûçíà÷àíû äëÿ òûõ, õòî âûêàðûñòî¢âàå "
-#~ "êàìï'þòýð\n"
-#~ "ìåíàâiòà äëÿ ðàñïðàöî¢êi ïðàãðàìà¢. Êàëi âû æàäàåöå ¢ñòàëÿâàöü ñåðâåð "
-#~ "àãóëüíàãà\n"
-#~ "ïðûçíà÷ýííÿ (äëÿ ïîøòû, äðóêó, ...), òàäû àáÿðûöå \"Ñåðâåð\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ýêñïåðò: Êàëi âû ñâàáîäíà âàëîäàåöå GNU/Linux i æàäàåöå ïðàâåñöi\n"
-#~ "¢ñòàëÿâàííå ç ïàãëûáëåííàé íàñòðîéêàé, ãýòû Êëàñ Óñòàëÿâàííÿ - äëÿ âàñ.\n"
-#~ "Âû òàêñàìà çìîæàöå àáðàöü ïðûçíà÷ýííå ñiñòýìû, ÿê ó âàðûÿíöå  \"Ïà âûáàðó"
-#~ "\"."
-
-#~ msgid "Setup SCSI"
-#~ msgstr "Íàñòðîéêà SCSI"
-
-#~ msgid "Show less"
-#~ msgstr "Ïàêàçàöü ìåíåé"
-
-#~ msgid "Show more"
-#~ msgstr "Ïàêàçàöü áîëåé"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Ïàêàçàöü óñå ëiñòû"
-
-#~ msgid "Shutting down"
-#~ msgstr "Âûêëþ÷ýííå êàìï'þòýðó"
-
-#~ msgid "Size: %d MB"
-#~ msgstr "Ïàìåð: %d MB"
-
-#~ msgid "Size: %d MB\n"
-#~ msgstr "Ïàìåð: %d MB\n"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Ïàìåð: %s Má"
-
-#~ msgid "Slovakian"
-#~ msgstr "Ñëàâàöêi"
-
-#~ msgid "Small(%dMB)"
-#~ msgstr "Ìàëû (%dMá)"
-
-#~ msgid "Socket"
-#~ msgstr "Ñîêåò"
-
-#~ msgid "Sort by"
-#~ msgstr "Óïàðàäêàâàöü ïà"
-
-#~ msgid "Take over the hard drive"
-#~ msgstr "Âûêàðûñòî¢âàöü óñþ äûñêàâóþ ïðàñòîðó"
-
-#~ msgid "Text"
-#~ msgstr "Òýêñò"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Íàñòóïíûÿ ïàêåòû áóäóöü âûäàëåíû ç ñiñòýìû"
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Çàðàç ïà÷íåööà ¢ñòàëÿâàíüíÿ àáðàíûõ ïàêåòà¢. Ãýòàÿ àïåðàöûÿ àäûìå\n"
-#~ "íåêàëüêi õâiëiíࢠ÷àñó, êàëi âû íå àáðàëi àáíà¢ëåííå iñíóþ÷àé ñiñòýìû,\n"
-#~ "áî ó àïîøíiì âûïàäêó øìàò ÷àñó ïàòðàáóåööà ÿø÷ý äà ïà÷àòêó àáíà¢ëåííÿ\n"
-#~ "êàá ïðààíàëiçàâàöü ñiñòýìó."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Ãýòàÿ ìåòêà ¢æî âûêàðûñòî¢âàåööà"
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Ãýòû ðàçäçåë ïðûñâå÷àíû íàñòðîéöû ëàêàëüíàé ñåòêi,\n"
-#~ "(LAN), àëüáî ìàäýìà. \n"
-#~ "\n"
-#~ "Àáÿðûöå \"Ëàêàëüíàÿ ñåòêà\" i DrakX ïàñïðàáóå çíàéöi\n"
-#~ "íà âàøàé ìàøûíå àäàïòýð Ethernet. Àäàïòýðû PCI ïàâiííû áûöü çíîéäçåíû\n"
-#~ "i íàñòðîåíû à¢òàìàòû÷íà. Àäíàê, ïðû ñêàðûñòàííi ISA,\n"
-#~ "à¢òàçíàõîäæàííå íå ïðàöóå, i âàì ïðûéäçåööà âûáiðàöü äðàéâåð\n"
-#~ "ñà ñïiñó, ÿêi ç'ÿâiööà ïåðàä âà÷ûìà ¢ ãýòûì âûïàäêó.\n"
-#~ "\n"
-#~ "\n"
-#~ "ßê i äëÿ àäàïòýðࢠSCSI, âû ìîæàöå äàçâîëiöü äðàéâåðó ïðàâåðûöü\n"
-#~ "ïðûëàäó ñàìàñòîéíà, iíàêø ïðûéäçåööà çàäàâàöü äðàéâåðó íàñòðîéêi,\n"
-#~ "ÿêiÿ âû çíîéäçåööå ¢ äàêóìåíòàöûi ïà âàøàìó àáñòàëÿâàííþ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ïðû ¢ñòàëÿâàíí³ Mandrake Linux íà êàìï'þòýð, ÿêi ïðàöóå âà ¢æî\n"
-#~ "íàëàäæàíàé ñåòöû, àäìiíiñòðàòàðó ñåòêi ïðûéäçåööà ïàâåäàìiöü\n"
-#~ "âàì óñþ íåàáõîäíóþ iíôàðìàöûþ (IP àäðàñ, ìàñêà ïàäñåòêi\n"
-#~ "öi ñêàðî÷àíà ïàäìàñêà, i iìÿ õàñòà). Êàëi âû ñòâàðàåöå\n"
-#~ "ïðûâàòíóþ ñåòêó, íàïðûêëàä äîìà, âû ïàâiííû âûáðàöü\n"
-#~ "óñå íàñòðîéêi ñàìàñòîéíà.\n"
-#~ "\n"
-#~ "\n"
-#~ "Àáÿðûöå \"Çëó÷ýííå ïðàç ìàäýì\" äëÿ íàñòðîéêi çëó÷ýííÿ\n"
-#~ "ç ñóñâåòíàé ãëàáàëüíàé ñåòêàé Internet ïðàç ìàäýì. DrakX ïàñïðàáóå\n"
-#~ "çíàéñöi âàø ìàäýì, àëå êàëi ¢ ÿãî ãýòà íå àòðûìàåööà, âàì áóäçå\n"
-#~ "ïàòðýáíà ñàìàñòîéíà ïàçíà÷ûöü ñåðûéíû ïîðò, äà ÿêîãà äàëó÷àíû ìàäýì."
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "×àñ (ñÿê) íåàêòû¢íàñöi, ïàñëÿ ÿêîãà\n"
-#~ "âåøàöü ñëóõà¢êó. (Ïàêiíüöå ïóñòîå, êàá àäìÿíiöü)"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Äëÿ ïîøóêó ïàäûõîäçÿ÷ûõ ïàìåðࢠýêðàíó çàðàç ïàñïðàáóåì ðîçíûÿ ðýæûìû. \n"
-#~ "Âàø ýêðàí áóäçå ìiãàöü... Êàëi âàì íå ïàäàáàåööà ìiãàííå, ÿãî ìîæíà \n"
-#~ "àäêëþ÷ûöü, òàäû ïàñëÿ çàêàí÷ýííÿ áóäçå ÷óâàöü ãóäîê."
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Ïåðàêëþ÷ûöü Óñòàëÿâàíà/Äàñòóïíà"
-
-#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
-#~ msgstr "Âûáðàíà çàøìàò ïàêåòà¢: %dMá íå ¢ëàçiöü ó %dMá"
-
-#~ msgid "Tree"
-#~ msgstr "Äðýâà"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Ïàñïðàáàâàöü çíàéñöi %s ïðûëàäû?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Ïàñïðàáàâàöü çíàéñöi PCI ïðûëàäû?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Ïàñïðàáàâàöü çíàéñöi êàðòû PCMCIA?"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Ïàñïðàáàâàöü çíàéñöi ìàäýì?"
-
-#~ msgid "URI for Local printer"
-#~ msgstr "URI äëÿ ëàêàëüíàãà ïðûíòýðó"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL êàòàëîãà, ÿêi çìÿø÷àå RPM"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB Ìûø (3 êíîïêi öi áîëåé)"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "Âûäàëåííå âûáðàíûõ RPM-ïàêåòࢠç ñiñòýìû"
-
-#~ msgid "Update location"
-#~ msgstr "Çìÿíiöü êðûíiöó"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Àäíà¢ëåííå áàçû ïàêåòࢠRPM"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Âûêàðûñòî¢âàöü ïàðîëi MD5"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Âûêàðûñòî¢âàöü DiskDrake"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "Âûêàðûñòî¢âàöü àïòûìiçàöûþ æîðñòêàãà äûñêó?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Âûêàðûñòî¢âàöü öåíÿâû ôàéë"
-
-#~ msgid "User name:"
-#~ msgstr "Iìÿ êàðûñòàëüíiêó:"
-
-#~ msgid "Wait"
-#~ msgstr "×àêàéöå"
-
-#~ msgid ""
-#~ "What URI device is your printer connected to\n"
-#~ "(note that parallel:/dev/lp0 is equivalent to LPT1:)?"
-#~ msgstr ""
-#~ "Äà ÿêîãà ïîðòó äàëó÷àíû âàø ïðûíòýð \n"
-#~ "(/dev/lp0 ýêâiâàëåíòíû LPT1:)?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Øòî âû æàäàåöå çíàéñö³?"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Øòî âû õî÷àöå çðàáiöü?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "ßêi òûï âàøàé ìûøû?"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "ßêi òûï âàøàé êëàâiÿòóðû?"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Äçåëÿ ÷àãî Âû áóäçåöå âûêàðûñòî¢âàöü ñ³ñòýìó?"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "ßêîå âûêàðûñòàííå àáiðàåöå?"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "ßêi ïà÷àòêîâû çàãðóç÷ûê âû æàäàåöå âûêàðûñòî¢âàöü?"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "ßêi ôàéë âû øóêàåöå?"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "ßêiÿ ïàêåòû øóêàåì"
-
-#~ msgid "Which packages do you want to install"
-#~ msgstr "Âûáàð ïàêåòࢠäëÿ ¢ñòàëÿâàííÿ"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "ßêi òûï ðàçäçåëó âàì ïàòðýáíû?"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Äà ÿêîãà ïîñëÿäî¢íàãà ïîðòó äàëó÷àíà âàøà ìûø?"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Ó âàñ íå õàïàå ìåñöà äëÿ Lnx4win"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "Âû íå ìàåöå àíiÿêiõ Windows ðàçäçåëà¢!"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "Çàðàç ìîæíà àáðàöü ïàêåòû ïðàãðàì, ÿêiÿ âû æàäàåöå ¢ñòàëÿâàöü.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ïà-ïåðøàå, âû ìîæàöå àáðàöü ãðóïó ïàêåòࢠêàá óñòàëÿâàöü öi àáíàâiöü. "
-#~ "Ïàñëÿ\n"
-#~ "âû ìîæàöå àäçíà÷ûöü áîëüø ïàêåòࢠó àäïàâåäíàñöi ç ÿãóëüíûì ïàìåðàì, ÿêi\n"
-#~ "âû æàäàåöå àáðàöü.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàëi âû ïðàöóåöå ¢ ðýæûìå ýêñïåðòó, òàäû ïàêåòû ìîæíà àáiðàöü "
-#~ "iíäûâiäóàëüíà.\n"
-#~ "Ìàéöå íà ¢âàçå, øòî íåêàòîðûÿ ïàêåòû ïàòðàáóþöü óñòàëÿâàííÿ iíøûõ "
-#~ "ïàêåòà¢.\n"
-#~ "Ãýòà çàâåööà çàëåæíàñööþ ïàêåòà¢. Ïàêåòû, ÿêiÿ âû àáðàëi, i ïàêåòû,\n"
-#~ "àä ÿêiõ ÿíû çàëåæàöü, áóäóöü à¢òàìàòû÷íà àáðàíû äçåëÿ ¢ñòàëÿâàííÿ.\n"
-#~ "Íåìàã÷ûìà ¢ñòàëÿâàöü ïàêåò äà ¢ñòàëÿâàííÿ ¢ñiõ ïàêåòà¢, àä ÿêiõ ¸í "
-#~ "çàëåæûöü."
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Âàø êàêìï'þòýð ìîæà áûöü ñêàíôiãóðàâàíû äà ñóìåñíàãà Iíòýðíýò-çëó÷ýííÿ.\n"
-
-#~ msgid "automagic"
-#~ msgstr "à¢òàìàãi÷íû"
-
-#~ msgid "beginner"
-#~ msgstr "ïà÷ûíàþ÷û"
-
-#~ msgid "brunette"
-#~ msgstr "áðóíåò"
-
-#~ msgid "changing type of"
-#~ msgstr "Çìÿíåííå òûïó"
-
-#~ msgid "default"
-#~ msgstr "Ïà äàìà¢ëåííþ"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-client"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "íå âûêàðûñòî¢âàöü pppoe"
-
-#~ msgid "expert"
-#~ msgstr "ýêñïåðò"
-
-#~ msgid "formatting"
-#~ msgstr "ôàðìàòàâàííå"
-
-#~ msgid "girl"
-#~ msgstr "äçÿ¢÷ûíà"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (âàæíà)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (äîáðà)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (âåëüìi äîáðà)"
-
-#~ msgid "linear"
-#~ msgstr "Ëiíåéíà"
-
-#~ msgid "loopback"
-#~ msgstr "Âiðòóàëüíàÿ ôàéëàâàÿ ñiñòýìà (loopback)"
-
-#~ msgid "mandatory"
-#~ msgstr "àáàâÿçêîâà"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "ïàìûëêà ìàíöiðàâàííÿ nfs"
-
-#~ msgid "pptp alcatel"
-#~ msgstr "pptp alcatel"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake çàðàç ó ðýæûìå ``low memory''.\n"
-#~ "rpmdrake áóäçå ïåðàçàïóø÷àíû äçåëÿ çàáåñïÿ÷ýííÿ ïîøóêó ôàéëà¢"
-
-#~ msgid "shadow"
-#~ msgstr "öåíü"
-
-#~ msgid "tie"
-#~ msgstr "ãàëüøòóê"
-
-#~ msgid "woman-blond"
-#~ msgstr "æàí÷ûíà-áëàíäûíêà"
diff --git a/perl-install/share/po/bg.po b/perl-install/share/po/bg.po
deleted file mode 100644
index 89683e4ec..000000000
--- a/perl-install/share/po/bg.po
+++ /dev/null
@@ -1,10963 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999, 2000 MandrakeSoft
-# Elena Radeva <ely@triada.bg>, 1999.
-# Pavel Cholakov <pavel@linux.home.bg>, 1999.
-# Boyan Ivanov <boyan17@bulgaria.com>, 1999, 2000
-# Bozhan Boiadzhiev <bozhan@plov.omega.bg>, 2000
-# Valery Dachev <valery@zonebg.com>, 2000, 2001
-#
-# Bulgarians on Linux use windows-1251 encoding
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2000-08-15 15:29+0200\n"
-"Last-Translator: Valery Dachev <valery@zonebg.com>\n"
-"Language-Team: Bulgarian\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=windows-1251\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Èçïîëçâàé ðàçøèðåíèåòî Xinerama"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Íàñòðîéêà ñàìî íà êàðòà \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Ãðàôè÷íà êàðòà"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Èçáåðåòå ãðàôè÷íà êàðòà"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Èçáåðåòå X ñúðâúð"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X ñúðâúð"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Êîÿ íàñòðîéêà íà XFree èñêàòå äà èìàòå ?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Êàðòàòà âè ìîæå äà èìà ïîääðúæêà íà õàðäóåðíî 3D óñêîðåíèå, íî ñàìî ñ Xfree %"
-"s.\n"
-"Êàðòàòà âè ñå ïîääúðæà îò XFree %s, êîéòî ìîæå äà èìà ïî-äîáðà ïîääðúæêà íà "
-"2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Êàðòàòà âè ìîæå äà èìà ïîääðúæêà íà õàðäóåðíî 3D óñêîðåíèå â XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ñ õàðäóåðíî 3D óñêîðåíèå"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Êàðòàòà âè ìîæå äà èìà ïîääðúæêà íà õàðäóåðíî 3D óñêîðåíèå ñ XFree %s.\n"
-"ÎÒÁÅËÅÆÅÒÅ, ×Å ÒÎÂÀ Å ÅÊÑÏÅÐÈÌÅÍÒÀËÍÀ ÏÎÄÄÐÚÆÊÀ È ÊÎÌÏÞÒÚÐÚÒ ÂÈ ÌÎÆÅ ÄÀ "
-"ÇÀÁÈÅ."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ñ ÅÊÑÏÅÐÈÌÅÍÒÀËÍO õàðäóåðíî 3D óñêîðåíèå"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Êàðòàòà âè ìîæå äà èìà ïîääðúæêà íà õàðäóåðíî 3D óñêîðåíèå, íî ñàìî ñ XFree %"
-"s,\n"
-"ÎÒÁÅËÅÆÅÒÅ, ×Å ÒÎÂÀ Å ÅÊÑÏÅÐÈÌÅÍÒÀËÍÀ ÏÎÄÄÐÚÆÊÀ È ÌÎÆÅ ÄÀ ÇÀÁÈÅ ÊÎÌÏÞÒÚÐÀ "
-"ÂÈ.\n"
-"Êàðòàòà âè ñå ïîääúðæà îò XFree %s, êîéòî ìîæå äà èìà ïî-äîáðà ïîääðúæêà íà "
-"2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (èíñòàëàöèÿ ãðàôè÷åí äðàéâåð)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "Íàñòðîéêà íà XFree"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Èçáåðåòå êàïàöèòåò íà ïàìåòòà íà ãðàôè÷íàòà ñè êàðòà"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Èçáåðåòå îïöèè çà ñúðâúðà"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Èçáåðåòå ìîíèòîð"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Ìîíèòîð"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Äâàòà êðèòè÷íè ïàðàìåòúðà ñà âåðòèêàëíàòà ñêîðîñò íà âúçñòàíîâÿâàíå, êîÿòî "
-"îòðàçÿâà ñêîðîñòòà, \n"
-"ñ êîÿòî öåëèÿò åêðàí ñå âúçñòàíîâÿâà, è íàé-âàæíîòî - õîðèçîíòàëíàòà\n"
-"ñèíõðîíèçàöèîííà ñêîðîñò, êîÿòî îòðàçÿâà ñêîðîñòòà, ñ êîÿòî ñå èçïèñâàò "
-"õîðèçîíòàëíèòå ëèíèè.\n"
-"\n"
-"ÌÍÎÃÎ Å ÂÀÆÍÎ äà èçáåðåòå òàêàâà ñèíõðîíèçàöèîííàòà ñêîðîñò, êîÿòî äà "
-"îòãîâàðÿ íà âúçìîæíîñòèòå íà Âàøèÿ ìîíèòîð - â ïðîòèâåí ñëó÷àé ìîæåòå äà "
-"ïîâðåäèòå ìîíèòîðà ñè.\n"
-" Àêî èìàòå íÿêàêâè ñúìíåíèÿ, èçáåðåòå êîíñåðâàòèâíà íàñòðîéêà."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Õîðèçîíòàëíà ñêîðîñò íà âúçñòàíîâÿâàíå"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Âåðòèêàëíà ñêîðîñò íà âúçñòàíîâÿâàíå"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Ìîíèòîðúò íå å íàñòðîåí"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Ãðàôè÷íàòà êàðòà âñå îùå íå å íàñòðîåíà"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Îùå íå å èçáðàíà ðàçäåëèòåëíà ñïîñîáíîñò"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Èñêàòå ëè äà òåñòâàòå íàñòðîéêèòå?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Âíèìàíèå: òåñòâàíåòî íà òàçè ãðàôè÷íà êàðòà ìîæå äà \"çàìðàçè\" êîìïþòúðà âè"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Ïðîâåðêà íà íàñòðîéêàòà"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"îïèòàéòå ñå äà ïðîìåíèòå íÿêîè ïàðàìåòðè"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Ïîÿâè ñå ãðåøêà:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Èçõîä äî %d ñåêóíäè"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Âåðíè ëè ñà íàñòðîéêèòå ?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ïîÿâè ñå ãðåøêà, îïèòàéòå ñå äà ïðîìåíèòå íÿêîè ïàðàìåòðè"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Ðàçäåëèòåëíà ñïîñîáíîñò"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Èçáåðåòå ðàçäåëèòåëíà ñïîñîáíîñò è äúëáî÷èíà íà öâåòîâåòå"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Ãðàôè÷íà êàðòà: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 ñúðâúð: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Åêñïåðòåí ðåæèì"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Ïîêàæè âñè÷êè"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Ðàçäåëèòåëíà ñïîñîáíîñò"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Òèï êëàâèàòóðà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Òèï ìèøêà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Óñòðîéñòâî íà ìèøêàòà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Ìîíèòîð: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Õîðèçîíòàëíà ñèíõðîíèçàöèÿ íà ìîíèòîðà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Âåðòèêàëíî îïðåñíÿâàíå íà ìîíèòîðà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Ãðàôè÷íà êàðòà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Èäåíòèôèêàöèÿ íà ãðàôè÷íàòà êàðòà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Ãðàôè÷íà ïàìåò: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Äúëáî÷èíà íà öâåòà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Ðàçäåëèòåëíà ñïîñîáíîñò: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 ñúðâúð: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 äðàéâåð: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Ïîäãîòîâêà çà íàñòðîéâàíå íà X-Window"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Êàêâî èñêàòå äà íàïðàâèòå?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Ïðîìåíåòå ìîíèòîðà"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Ïðîìåíåòå ãðàôè÷íàòà êàðòà"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Ïðîìåíåòå îïöèèòå íà ñúðâúðà"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Ïðîìåíåòå ðàçäåëèòåëíàòà ñïîñîáíîñò"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Ïîêàæè èíôîðìàöèÿòà"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Òåñòâàé îòíîâî"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Èçëèçàíå"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Äà çàïàçÿ ëè ïðîìåíèòå ?\n"
-"Òåêóùàòà íàñòðîéêà å:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Ìîëÿ âëåçòå îòíîâî â %s, çà äà àêòèâèðàòå ïðîìåíèòå"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Ìîëÿ èçëåçòå îò ñåñèÿòà è èçïîëçâàéòå Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X ïðè ñòàðòèðàíå íà ñèñòåìàòà"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Kîìïþòúðà âè ìîæå àâòîìàòè÷íî, äà âëåçå â X ïðè ñòàðòèðàíå.\n"
-"Èñêàòå ëè X äà ñå ñòàðòèðà, êîãàòî ðåñòàðòèðàòå ñèñòåìàòà?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 öâÿòà (8 áèòà)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 õèëÿäè öâÿòà (15 áèòà)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 õèëÿäè öâÿòà (16 áèòà)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 ìèëèîíà öâÿòà (24 áèòà)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 ìèëèàðäà öâÿòà (32 áèòà)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 ÊÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 ÊÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 ÌÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 ÌÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 ÌÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 ÌÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 ÌÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 ÌÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 ÌÁ èëè ïîâå÷å"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 íà 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 íà 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-ñúâìåñòèì, 1024x768 íà 87 Hz interlaced (íÿìà 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 íà 87 Hz interlaced, 800x600 íà 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 íà 60 Hz, 640x480 íà 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 íà 60 Hz, 800x600 íà 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Âèñîêî÷åñòîòåí SVGA, 1024x768 íà 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Ìíîãî÷åñòîòåí ìîíèòîð, êîéòî äîñòèãà 1280x1024 íà 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Ìíîãî÷åñòîòåí ìîíèòîð, êîéòî äîñòèãà 1280x1024 íà 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Ìíîãî÷åñòîòåí ìîíèòîð, êîéòî äîñòèãà 1280x1024 íà 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Ìîíèòîð, êîéòî äîñòèãà 1600x1200 íà 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Ìîíèòîð, êîéòî äîñòèãà 1600x1200 íà 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Ïúðâè ñåêòîð îò ñòàðòèðàùèÿ ñå äÿë"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Ïúðâèÿò ñåêòîð îò äðàéâà (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILO èíñòàëàöèÿ"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Êúäå èñêàòå äà èíñòàëèðàòå bootloader-à?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "LILO/grub èíñòàëàöèÿ"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO ñ òåêñòîâî ìåíþ"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO ñ ãðàôè÷íî ìåíþ"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Ñòàðòèðàíå îò DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Îïöèè íà çàðåæäàùàòà ïðîãðàìà"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Èçïîëçâàíà çàðåæäàùàòà ïðîãðàìà"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Bootloader èíñòàëàöèÿ"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Ñòàðòèðàùî óñòðîéñòâî"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (íå ðàáîòè íà ñòàðè BIOS-è)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Êîìïàêòåí"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "êîìïàêòåí"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Âèäåî ðåæèì"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Çàáàâÿíå ïðåäè ñòàðòèðàíåòî íà default äÿëà"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Ïàðîëà"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Ïàðîëà (îòíîâî)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Îãðàíè÷è îïöèèòå, çàäàâàíè îò êîìàíäíèÿ ðåä"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "îãðàíè÷è"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Ïî÷èñòâàíå íà /tmp ïðè âñÿêî çàðåæäàíå"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Òî÷åí ðàçìåð íà RAM-ïàìåòòà, àêî å íåîáõîäèìî (íàìåðåíè %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Âêëþ÷è ìíîãî ïðîôèëè"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Äàéòå ðàçìåðà RAM-ïàìåò â Mb"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Îïöèÿòà ``Îãðàíè÷è îïöèèòå îò êîìàíäíèÿ ðåä'' å áåçïîëåçíà áåç ïàðîëà"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Ìîëÿ, îïèòàéòå îòíîâî"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Ïàðîëèòå íà ñúâïàäàò"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Ñòàðòîâî ñúîáùåíèå"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Èç÷àêâàíå íà Open Firmware"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Èç÷àêâàíå çà ñòàðòèðàíå íà ÿäðîòî"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Ñòàðòèðàíå îò CD ?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Ñòàðòèðàíå îò OF ?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "ÎÑ ïî ïîäðàçáèðàíå ?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Òîâà ñà ðàçëè÷íèòå çàïèñè.\n"
-"Ìîæåòå äà äîáàâèòå îùå èëè äà ïðîìåíèòå ñúùåñòâóâàùèòå."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Äîáàâè"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Ãîòîâî"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Ìîäèôèöèðàé"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Êàêúâ òèï èíôîðìàöèÿ èñêàòå äà ïðèáàâèòå"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Äðóãà ÎÑ (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Äðóãà ÎÑ (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Äðóãà ÎÑ (Windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Îáðàç"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Ãëàâåí"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Äîïúëâàíå"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "×åòåíå-çàïèñ"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Òàáëèöà"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Îïàñåí"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Åòèêåò"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Ïî ïîäðàçáèðàíå"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-ãîëåìèíà"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "Áåç ãðàôèêà"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Ïðåìàõíè çàïèñ"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Ïðàçåí åòèêåò íå å ðàçðåøåí"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Òîçè åòèêåò âå÷å ñå èçïîëçâà"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Íàìåðåíè ñà %s %s èíòåðôåéñè"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Èìàòå ëè äðóã(è) ?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Èìàòå ëè íÿêàêúâ %s èíòåðôåéñ?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Íå"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Äà"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Âèæ õàðäóåðíàòà èíôîðìàöèÿ"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Èíñòàëèðàíå íà äðàéâåð çà %s ïëàòêà %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(ìîäóë %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Êîé %s äðàéâåð äà ïðîáâàì ?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-" íÿêîè ñëó÷àè, %s äðàéâåðúò ñå íóæäàå îò äîïúëíèòåëíà èíôîðìàöèÿ, çà\n"
-"äà ðàáîòè êîðåêòíî, âúïðåêè ÷å íîðìàëíî ðàáîòè è áåç íåÿ. Æåëàåòå ëè "
-"äàïîäàäåòå\n"
-"äîïúëíèòåëíè îïöèè çà íåãî èëè äà ðàçðåøèòå íà äðàéâåðà äà ïîòúðñè "
-"èíôîðìàöèÿòà\n"
-"îò êîÿòî ñå íóæäàå ? Ïî ïðèíöèï òîâà ìîæå äà çàáèå êîìïþòúðà âè, íî íÿìà äà "
-"ãî ïîâðåäè."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Àâòîìàòè÷íî çàñè÷àíå"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Çàäàé îïöèè"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Ñåãà ìîæåòå äà ïîäàäåòå îïöèèòå ìó êúì ìîäóëà %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Ñåãà ìîæåòå äà ïîäàäåòå îïöèèòå ìó äî ìîäóëà %s.\n"
-"Îïöèèòå ñà âúâ ôîðìàò ``èìå=ñòîéíîñò èìå2=ñòîéíîñò2 ...''.\n"
-"Íàïðèìåð: ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Îïöèè íà ìîäóëà:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Çàðåæäàíåòî íà ìîäóëà %s íå óñïÿ.\n"
-"Èñêàòå ëè äà îïèòàòå îòíîâî ñ äðóãè ïàðàìåòðè ?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(âå÷å ïðèáàâèõ %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Òàçè ïàðîëà å ïðåêàëåíî ïðîñòà"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Ìîëÿ, çàäàéòå ïîòðåáèòåëñêî èìå"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Ïîòðåáèòåëñêîòî èìå ìîæå äà âêëþ÷âà ñàìî ìàëêè áóêâè, íîìåðà, `-' è `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Òîâà ïîòðåáèòåëñêî èìå å âå÷å äîáàâåíî"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Äîáàâè ïîòðåáèòåë"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Âúâåäåòå ïîòðåáèòåë\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Ïðèåìè ïîòðåáèòåë"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Èñòèíñêî èìå"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Ïîòðåáèòåëñêî èìå"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Øåë"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Èêîíà"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:757
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ìîãà äà íàñòðîÿ êîìïþòúðà âè äà âëèçàíå â ñèñòåìàòà àâòîìàòè÷íî êàòî íÿêîé "
-"ïîòðåáèòåë.\n"
-"Èñêàòå ëè òàçè âúçìîæíîñò ?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Èçáåðåòå ïîäðàçáèðàù ñå ïîòðåáèòåë :"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Èçáåðåòå Windows Manager çà ñòàðòèðàíå:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Ìîëÿ, èçáåðåòå èçïîëçâàí åçèê."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "Ìîæåòå äà èçáåðåòå äðóãè åçèöè, êîèòî ùå áúäàò íàëèöå ñëåäèíñòàëàöèÿòà"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Âñè÷êè"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "íÿìà äîñòàòú÷íî ìÿñòî çà /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Äåñêòîï"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Ñòàðòîâî Ìåíþ"
-
-#: ../../bootloader.pm_.c:972
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Íå ìîæåòå äà èíñòàëèðàòå bootloader íà äÿëà %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "íÿìà âúâåäåíà ïîìîù îùå.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Íàñòðîéêà íà íà÷èíà íà ñòàðòèðàíå"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Ôàéëîâå"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Ôàéë/_Èçõîä"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<êîíòðîë>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle êàòåãîðèçèðàí ìîíèòîð"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle ìîíèòîð"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Îáèêíîâåí ìîíèòîð"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Îáèêíîâåí Gtk+ ìîíèòîð"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Ïóñíè Aurora ïðè ñòàðòèðàíå"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Ðåæèì íà Lilo/grub"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Â ìîìåíòà èçïîëçâàòå %s êàòî ïðîãðàìà çà ñòàðòèðàíå.\n"
-"Öúêíåòå íà Íàñòðîé, çà äà ñòàðòèðàòå óñòàíîâÿâàùèÿ ìàãüîñíèê."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Íàñòðîé"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Ðåæèì íà ñòàðòèðàíå"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Ñèñòåìåí ðåæèì"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Ïóñíè X-Window ñèñòåìàòà ïðè ñòàðòèðàíå"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Íå, íå èñêàì autologin"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Äà, èñêàì autologin ñ òîâà (ïîòðåáèòåë, äåñêòîï)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Îòìÿíà"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "íå ìîãà äà îòâîðÿ /etc/inittab çà ÷åòåíå: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Èíñòàëàöèÿòà íà LILO ïðîâàëåíà. Ïîÿâè ñå ñëåäíàòà ãðåøêà:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "ÃÁ"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "ÊÁ"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "ÌÁ"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "ÒÁ"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d ìèíóòè"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 ìèíóòà"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d ñåêóíäè"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Ïúðâî ñúçäàéòå backup íà ñâîèòå äàííè"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Ïðî÷åòåòå âíèìàòåëíî !"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Àêî ñìÿòàòå äà èçïîëçâàòå aboot, îñòàâåòå ñâîáîäíî ïðîñòðàíñòâî (2048 "
-"ñåêòîðà\n"
-"ñà äîñòàòú÷íè) â íà÷àëîòî íà äèñêà"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Ãðåøêà"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Ìàãüîñíèê"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Íîâ"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "Îòäàëå÷åí"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Ìÿñòî íà ìîíòèðàíå"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Îïöèè"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Âèä"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Äåìîíòèðàé"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Ìîíòèðàé"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Èçáåðåòå äåéñòâèå"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Èìàòå åäèí ãîëÿì FAT äÿë\n"
-"(ïî ïðèíöèï ñå ïîëçâàò îò Microsoft Dos/Windows).\n"
-"Ïðåäëàãàì ïúðâî äà ïðîìåíèòå ãîëåìèíàòà íà òîçè äÿë\n"
-"(ùðàêíåòå âúðõó íåãî, à ñëåä òîâà ùðàêíåòå âúðõó \"Ïðîìåíè ãîëåìèíàòà\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Ìîëÿ, öúêíåòå íà äÿëà"
-
-#: ../../diskdrake.pm_.c:240
-msgid "Please click on a media"
-msgstr "Ìîëÿ, öúêíåòå íà íîñèòåëÿ"
-
-#: ../../diskdrake.pm_.c:243
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr ""
-"Ìîëÿ, öúêíåòå íà áóòîíà ïî-ãîðå\n"
-"\n"
-"Èëè èçïîëçâàéòå \"Íîâ\""
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr "Èçïîëçâàéòå \"Íîâ\""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Ïîäðîáíîñòè"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Journalised FS"
-msgstr "Æóðíàëíà FS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Ïðàçåí"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Äðóãà"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Âèäîâå ôàéëîâà ñèñòåìà:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Ñúçäàé"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Âìåñòî òîâà èçïîëçâàéòå ``%s''"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Èçòðèé"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Ïúðâî èçïîëçâàéòå 'Äåìîíòèðàíå'"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Ñëåä ïðîìÿíà íà òèïà íà äÿëà %s, âñè÷êè äàííè âúðõó íåãî ùå áúäàò çàãóáåíè"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Êúäå èñêàòå äà ìîíòèðàòå óñòðîéñòâî %s ?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "Îïöèè çà mount:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "Ðàçëè÷íè"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "Ñìåíÿåì íîñèòåë"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "Ïðîìÿíè òèïà"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Êîÿ ôàéëîâà ñèñòåìà èñêàòå ?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "Òúðñåíå íà äîñòúïíè NFS ñïîäåëåíè ðåñóðñè"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "Òúðñåíå çà äîñòúïíè NFS ðåñóðñè íà ñúðâúð %s"
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr "Àêî ñïèñúêúò ïî-ãîðå íå ñúäúðæà èñêàíèÿ åëåìåíò, âúâåäåòå ãî òóê:"
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Ñúðâúð"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "Ïîäåëåíè ðåñóðñè"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "Ñêàíèðàíå íà äîñòúïíèòå SAMBA ïîäåëåíè ðåñóðñè"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "Ñêàíèðàíå íà äîñòúïíèòå SAMBA ïîäåëåíè ðåñóðñè íà ñúðâúð %s"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "Èçáåðåòå äÿë"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Èçáåðåòå äðóã äÿë"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Èçëåç"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Ïðåìèíè â Åêñïåðòåí ðåæèì"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Ïðåìèíè â Íîðìàëåí ðåæèì"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Âúðíè"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Ïðîäúëæåíèå âúïðåêè âñè÷êî ?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Èçõîä áåç çàïèñ"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Èçõîä, áåç äà çàïèñ íà òàáëèöàòà íà äÿëîâåòå ?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Èñêàòå ëè äà çàïàçèòå ïðîìåíèòå â /etc/fstab"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Àâòîìàòè÷íî ñúçäàâàíå"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Èç÷èñòè âñè÷êî"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Îùå"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "Èíôîðìàöèÿòà çà òâúðäèÿ äèñê"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Íÿìà äîñòàòú÷íî ìÿñòî çà àâòîìàòè÷íî çàåìàíå"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Âñè÷êè ïúðâè÷íè äÿëîâå ñå èçïîëçâàò"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Íå ìîãà äà äîáàâÿ ïîâå÷å äÿëîâå"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Àêî èñêàòå îùå äÿëîâå, ìîëÿ èçòðèéòå åäèí, çà äà ìîæåòå äà ñúçäàäåòå åäèí "
-"ðàçøèðåí äÿë"
-
-#: ../../diskdrake_interactive.pm_.c:285
-msgid "Save partition table"
-msgstr "Çàïàçè òàáëèöàòà ñ äÿëîâåòå"
-
-#: ../../diskdrake_interactive.pm_.c:286
-msgid "Restore partition table"
-msgstr "Âúçñòàíîâè òàáëèöàòà ñ äÿëîâåòå"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Ñïàñÿâàíå òàáëèöàòà ñ äÿëîâåòå"
-
-#: ../../diskdrake_interactive.pm_.c:289
-msgid "Reload partition table"
-msgstr "Ïðåçàðåäè òàáëèöàòà ñ äÿëîâåòå"
-
-#: ../../diskdrake_interactive.pm_.c:293
-msgid "Removable media automounting"
-msgstr "Àâòîìàòè÷íî ìîíòèðàíå íà ñìåíÿåì íîñèòåë"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Èçáåðåòå ôàéë"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Ðåçåðâíàòà òàáëèöà íà äÿëîâåòå íå å ñúñ ñúùàòà ãîëåìèíà\n"
-"Äà ïðîäúëæà ëè âñå ïàê ?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Ïðåäóïðåæäåíèå"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Ñëîæåòå äèñêåòà âúâ ôëîïèòî\n"
-"Âñè÷êè äàííè, íàìèðàùè ñå âúðõó äèñêåòàòà, ùå áúäàò çàãóáåíè"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Îïèòâàì ñå äà ñïàñÿ òàáëèöàòà íà äÿëîâåòå"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "Ïîäðîáíà èíôîðìàöèÿ"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Ïðîìåíè ãîëåìèíàòà"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Ïðåìåñòè"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Ôîðìàòèðàé"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Àêòèâèðàé"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Ïðèáàâè êúì RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Ïðèáàâè êúì LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Ïðåìàõíè îò RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Ïðåìàõíè îò LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Ìîäèôèöèðàé RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Èçïîëçâàé çà loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Ñúçäàé íîâ äÿë"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Íà÷àëåí ñåêòîð: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Ãîëåìèíà â MB: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Âèä ôàéëîâà ñèñòåìà: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Ìÿñòî íà ìîíòèðàíå: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Ïðåäïî÷èòàíèå: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-msgid "Remove the loopback file?"
-msgstr "Äà ïðåìàõíà ëè loopback ôàéëà ?"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Ïðîìÿíà òèïà íà äÿëà"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "Ïðåõîä îò ext2 êúì ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Êúäå èñêàòå äà ìîíòèðàòå loopback-ôàéëà %s ?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Íå ìîãà äà ìàõíà òî÷êàòà íà ìîíòèðàíå, òúé êàòî äÿëúò ñå èçïîëçâà çà "
-"loopback.\n"
-"Ïúðâî ìàõíåòå loopback"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Èç÷èñëÿâàì ãðàíèöèòå íà fat ôàéëîâàòà ñèñòåìà"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Ïðîìÿíà íà ãîëåìèíàòà"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Ãîëåìèíàòà íà äÿëà íå ìîæå äà áúäå ïðîìåíåíà"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Âñè÷êè äàííè íà òîçè äÿë òðÿáâà äà áúäàò àðõèâèðàíè"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Ñëåä ïðîìÿíà ãîëåìèíàòà íà äÿëà %s, äàííète âúðõó íåãî ùå áúäàò çàãóáåíè"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Èçáåðåòå íîâà ãîëåìèíà"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "Íîâà ãîëåìèíà â MB: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Íà êîé äèñê èñêàòå äà ãî ïðåìåñòèòå ?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Ñåêòîð"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Íà êîé ñåêòîð èñêàòå äà ãî ïðåìåñòèòå?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Ìåñòåíå"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Ìåñòâÿ äÿëà ... "
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Èçáåðåòå ñúùåñòâóâàù RAID çà ïðèáàâÿíå"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "íîâ"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Èçáåðåòå ñúùåñòâóâàù LVM çà ïðèáàâÿíå"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "LVM èìå ?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Òîçè äÿë íå ìîæå äà áúäå èçïîëçâàí çà loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Èìå íà loopback ôàéëà: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-msgid "Give a file name"
-msgstr "Äàéòå èìå íà ôàéë"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Ôàéëúò âå÷å ñå èçïîëçâà òî äðóã loopback, èçáåðåòå äðóã ôàéë."
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Ôàéëúò âå÷å ñúøåñòâóâà. Äà ãî èçïîëçâàì ëè ?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "óñòðîéñòâî"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "íèâî"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "ãîëåìèíà íà ïàð÷åòî"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Âíèìàíèå: òàçè îïåðàöèÿ å îïàñíà"
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Êàêúâ òèï ðàçäåëÿíå íà äÿëîâå ?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Ñúæàëÿâàì, íî íå ìîãà äà ïðèåìà äà ñúçäàì /boot òîëêîâà íàâúòðå âúðõó äèñêà "
-"(âúðõó öèëèíäúð > 1024).\n"
-"Èëè èçïîëçâàòå LILO è òî íå ðàáîòè, èëè íå èçïîëçâàòå LILO è íÿìàòå íóæäà "
-"îò /boot"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Äÿëúò, êîéòî ñòå ìàðêèðàëè çà root (/) å ôèçè÷åñêè ðàçïîëîæåí îòâúä\n"
-"1024-èÿ öèëèíäúð íà òâúðäèÿ äèñê è íÿìàòå /boot äÿë.\n"
-"Àêî ñìÿòàòå äà èçïîëçâàòå boot ìåíèäæúðà LILO, áúäåòå âíèìàòåëíè ïðè\n"
-"ïðèáàâÿíåòî íà /boot äÿë"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Ìàðêèðàëè ñòå ñîôòóåðåí RAID äÿë êàòî root (/).\n"
-"Íÿìà çàðåæäàùà ïðîãðàìà, êîÿòî äà ìîæå äà ñå ñïðàâè ñ íåãî áåç /boot äÿë.\n"
-"Òàêà ÷å äîáàâåòå /boot äÿë"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Òàáëèöàòà íà äÿëîâåòå íà óñòðîéñòâî %s ùå áúäå çàïèñàíà âúðõó äèñêà !"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Òðÿáâà äà ðåñòàðòèðàòå, ïðåäè ïðîìåíèòå äà âëÿçàò â ñèëà"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Ñëåä ôîðìàòèðàíå íà äÿëà %s, âñè÷êè äàííè âúðõó íåãî ùå áúäàò çàãóáåíè"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Ôîðìàòèðàíå"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Ôîðìàòèðàíå íà loopback ôàéëà %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Ôîðìàòèðàíå íà äÿëà %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Hide files"
-msgstr "Ñêðèé ôàéëîâåòå"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Move files to the new partition"
-msgstr "Ïðåìåñòè ôàéëîâåòå íà íîâ äÿë"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Äèðåêòîðèÿòà %s âå÷å ñúäúðæà íÿêàêâè äàííè\n"
-"(%s)"
-
-#: ../../diskdrake_interactive.pm_.c:906
-msgid "Moving files to the new partition"
-msgstr "Ïðåìåñòè ôàéëîâåòå íà íîâ äÿë"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr "Êîïèðàíå íà %s"
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, c-format
-msgid "Removing %s"
-msgstr "Èçòðèâàíå íà %s"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Óñòðîéñòâî: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Áóêâà íà óñòðîéñòâîòî ïîä DOS: %s (ïðîñòî ïðåäïîëîæåíèå)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Âèä: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Èìå: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Íà÷àëî: ñåêòîð %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Ðàçìåð: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ñåêòîðà"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Îò öèëèíäúð %d äî öèëèíäúð %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Ôîðìàòèðàí\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Íåôîðìàòèðàí\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Ìîíòèðàí\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback ôàéë(îâå):\n"
-"   %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Äÿë, êîéòî ñå ñòàðòèðà ïî ïîäðàçáèðàíå\n"
-"    (çà MS-DOS boot, íå çà lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Íèâî %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Ðàçìåð íà ïàð÷åòî %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-äèñêîâå %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Èìå íà loopback ôàéëà: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Âåðîÿòíî å òîçè äÿë äà å\n"
-"Äðàéâåð-äÿë, ìîæå áè òðÿáâà\n"
-"òðÿáâà äà ãî îñòàâèòå.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Òàçè ñïåöèàëíà ñòàðòèðàùà\n"
-"èâèöà íà äÿëà å çà äâîéíî\n"
-"ñòàðòèðàíå íà ñèñòåìàòà âè.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Ðàçìåð: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ãåîìåòðèÿ: %s öèëèíäðè, %s ãëàâè, %s ñåêòîðè\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Èíôîðìàöèÿ: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-äèñêîâå %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Òèï íà òàáëèöàòà ñ äÿëîâå: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "íà øèíà %d àäðåñ %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Îïöèè: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ôîðìàòèðàíå îò %s ïðîâàëåíî"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "íå çíàì êàê äà ôîðìàòèðàì %s â òèï %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "ìîíòèðàíåòî íå óñïÿ"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck èçëåçå ñ èçõîäåí êîä %d èëè ñèãíàë %d"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "ìîíòèðàíåòî íå óñïÿ: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "ãðåøêà ïðè äåìîíòèðàíåòî íà %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "ïðîñò"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "ñúðâúð"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Íå ìîæåòå äà èçïîëçâàòå JFS çà äÿë ïî-ìàëúê îò 16 ÌÁ"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Íå ìîæåòå äà èíñòàëèðàíå ReiserFS íà äÿë ïî-ìàëúê îò 32 ÌÁ"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Òî÷êèòå íà ìîíòèðàíå òðÿáâà äà çàïî÷âàò ñ /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Âå÷å èìà äÿë ñ òàçè ìÿñòî íà ìîíòèðàíå %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Íå ìîæåòå äà èçïîëçâàòå LVM ëîãè÷åñêè òèï çà ìÿñòî íà ìîíòèðàíå %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Òàçè äèðåêòîðèÿ òðÿáâà äà îñòàíå â ðàìêèòå íà root ôàéëîâàòà ñèñòåìà."
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Íóæäàåòå ñå îò èñòèíñêà ôàéëîâà ñèñòåìà (ext2, reiserfs) çà òàçè òî÷êà íà "
-"ìîíòèðàíå\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Ãðåøêà ïðè îòâàðÿíå íà %s çà çàïèñ: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ïîÿâè ñå ãðåøêà - íå ñà îòêðèòè âàëèäíè óñòðîéñòâà, âúðõó êîèòî äà áúäàò "
-"ñúçäàäåíè íîâè ôàéëîâè ñèñòåìè. Ìîëÿ ïðîâåðåòå òâúðäèÿ ñè äèñê ñè çà "
-"ïðè÷èíàòà çà òîçè ïðîáëåì"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Íÿìàòå íèêàêâè äÿëîâå!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux å ìíîãîïîòðåáèòåëñêà ñèñòåìà, êîÿòî îçíà÷àâà, ÷å âñåêè ïîòðåáèòåë "
-"ìîæå\n"
-"äà èìà ñâîè ïðåäïî÷åòàíèÿ, ôàéëîâå è ò.í.. ìîæåòå äà ïðî÷åòåòå Ðúêîâîñòâîòî "
-"íà\n"
-"Ïîòðåáèòåëÿ, çà äà íàó÷èòå ïîâå÷å.\n"
-"Çà ðàçëèêà îò Root, êîéòî å àäìèíèñòðàòîðúò, ïîòðåáèòåëèòå, êîèòî ùå "
-"äîáàâèòå òóê\n"
-"íÿìà äà ìîãàò äà ïðîìåíÿò íèùî îñâåí ñîáñòâåíèòå ñè ôàéëîâå è òåõíèòå "
-"íàñòðîéêè.\n"
-"Ùå òðÿáâà äà ñúçäàäåòå ïîíå åäèí îáèêíîâåí ïîòðåáèòåë çà ñåáå ñè.\n"
-"Ñ òîçè àêàóíò ùå òðÿáâà äà âëèçàòå çà ðóòèííà äåéíîñò. Âúïðåêè òîâà "
-"ïðàêòèêàòà\n"
-"äà âëèçàòå êàòî root åæåäíåâíî, ìîæå äà áúäå ìíîãî îïàñíà ! È íàé-"
-"ìàëêàòàãðåøêà\n"
-"ìîæå äà îçíà÷àâà, ÷å ñèñòåìàòà âè íÿìà äà ðàáîòè ïîâå÷å. Àêî íàïðàâèòå íÿêîÿ "
-"ñåðèîçíà\n"
-"ãðåøêà êàòî ïîòðåáèòåë, òîâà ìîæå ñà äà äîâåäå äî çàãóáà íà ÷àñò îò "
-"èíôîðìàöèÿòà,\n"
-"íî íå è íà öÿëàòà ñèñòåìà.\n"
-"\n"
-"Ïúðâî, òðÿáâà äà ñè âúâåäåòå èìåòî. Òîâà íå å çàäúëæèòåëíî, ðàçáèðà ñå, "
-"âñúùíîñò\n"
-"ìîæåòå äà âúâåäåòå êàêâîòî è äà å. DrakX ñëåä òîâà ùå èçáåðå ïúðâàòà "
-"âúâåäåíà\n"
-"â êóòèéêàòà äóìà è ùå ãî èçêàðà êàòî ïîòðåáèòåëñêî èìå. Òîâà å èìåòî, ñ "
-"êîåòî\n"
-"âñúùíîñò îïðåäåëåíèÿò ïîòðåáèòåë ùå âëèçà â ñèñòåìàòà. Ìîæåòå äà ãî "
-"ïðîìåíèòå.\n"
-"Òðÿáâà äà âúâåäåòå è ïàðîëà òóê. Ïàðîëàòà íà íåïðåâèëåãèðîâàí (îáèêíîâåí) "
-"ïîòðåáèòåë\n"
-"íå å òîëêîâà ôàòàëíà êàòî òàçè íà Root îò ãëåäíà òî÷êà íà ñèãóðíîñòòà, íî "
-"âñå\n"
-"ïàê íÿìà ïðè÷èíà äà ÿ ïîäöåíÿâàòà, òúé êàòî ðèñêóâàòå ôàéëîâåòå ñè.\n"
-"\n"
-"Ñëåä êàòî öúêíåòå íà \"Ïðèåìè ïîòðåáèòåë\", ìîæåòå äà äîáàâèòå êîëêîòî ñè "
-"èñêàòå.\n"
-"Äîáàâåòå ïî åäèí ïîòðåáèòåë çà âñåêè îò ïðèÿòåëèòå ñè: áàùà ñè, ñåñòðà ñè, "
-"íàïðèìåð.\n"
-"Êîãàòî ñòå äîáàâèëè âñè÷êè ïîòðåáèòåëè, êîèòî èñêàòå, öúêíåòå Ãîòîâî.\n"
-"\n"
-"Öúêíåòå íà áóòîíà \"Íàïðåäíè÷àâ\", çà äà ïðîìåíèòå îáâèâêàòà ïî ïîäðàçáèðàíå "
-"íà\n"
-"ïîòðåáèòåëÿ (bash ïî ïîäðàçáèðàíå)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ïî-ãîðå ñà èçáðîåíè çàñå÷åíèòå Linux äÿëîâå ñúùåñòâóâàùè\n"
-"íà òâúðäèÿ âè äèñê. Ìîæåòå äà çàïàçèòå èçáîðà íàïðàâåí îò ìàãüîñíèêà, òå ñà\n"
-"äîáðè çà îáùà óïîòðåáà. Àêî ãè ïðîìåíèòå, òðÿáâà äà ïîíå äà îïðåäåëèòå\n"
-"root äÿë (\"/\"). Íå èçáèðàéòå ïðåêàëåíî ìàëêè äÿëîâå, çàùîòî íÿìà äà "
-"ìîæåòå\n"
-"äà èíñòàëèðàòå äîñòàòú÷íî ñîôòóåð. Àêî èñêàòå äà ñúõðàíÿâàòå äàííèòå ñè íà\n"
-"îòäåëåí äÿë, òðÿáâà äà èçáåðåòå \"/home\" (âúçìîæíî å ñàìî, àêî èìàòå "
-"ïîâå÷å\n"
-"îò åäèí Linux äÿë).\n"
-"\n"
-"\n"
-"Çà èíôîðìàöèÿ, âñåêè äÿë å ïîêàçàí, êàêòî ñëåäâà: \"Èìå\", \"Êàïàöèòåò\".\n"
-"\n"
-"\n"
-"\"Èìåòî\" ñå êîäèðà êàêòî ñëåäâà: \"òèï íà äèñêà\", \"íîìåð íà äèñêà\",\n"
-"\"íîìåð íà äÿë\" (íàïðèìåð, \"hda1\").\n"
-"\n"
-"\n"
-"\"Òèïúò íà äèñêà\" ìîæå äà å \"hd\", àêî å IDE òâúðä äèñê, èëè \"sd\", àêî "
-"å\n"
-"SCSI òâúðä äèñê.\n"
-"\n"
-"\n"
-"\"Íîìåðúò íà äèñêà\" âèíàãè å áóêâàòà ñëåä \"hd\" èëè \"sd\". Ïðè IDE "
-"äèñêîâå:\n"
-"\n"
-"   * \"a\" îçíà÷àâà \"master äèñê íà ïúðâèÿ IDE êîíòðîëåð\",\n"
-"   * \"b\" îçíà÷àâà \"slave äèñê íà ïúðâèÿ IDE êîíòðîëåð\",\n"
-"   * \"c\" îçíà÷àâà \"master äèñê íà âòîðèÿ IDE êîíòðîëåð\",\n"
-"   * \"d\" îçíà÷àâà \"slave äèñê íà âòîðèÿ IDE êîíòðîëåð\".\n"
-"\n"
-"\n"
-"Ïðè SCSI óñòðîéñòâà, \"a\" îçíà÷àâà \"ïúðâè òâúðä äèñê\", \"b\" îçíà÷àâà "
-"\"âòîðè òâúðä äèñê\" è ò.í.."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Èíñòàëàöèÿòà íà Mandrake Linux å ðàçïîëîæåíà íà íÿêîëêî CDROM-à. DrakX\n"
-"çíàå äàëè èçáðàí ïàêåò íå ñå íàìèðà íà äðóã CDROM èëè ùå èçâàäè òåêóùîòî\n"
-"CD è ùå âè îñòàâè äà âêàðàòå òîâà, îò êîåòî èìà íóæäà."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Ñåãà å ìîìåíòúò äà îïðåäåëèòå êîè ïðîãðàìè èñêàòå äà áúäàò èíñòàëèðàíè íà\n"
-"ñèñòåìàòà âè. Â Mandrake Linux äèñòðèáóöèÿòà èìà õèëÿäè ïàêåòè, íî íå å\n"
-"çàäúëæèòåëíî äà ãè çíàåòå íàèçóñò.\n"
-"\n"
-"Àêî èçâúðøâàòå ñòàíäàðòíà èíñòëàöèÿ îò CDROM, ïúðâî ùå áúäåòå ïîïèòàíè êîè\n"
-"CD-òà èìàòå (â Åêñïåðòåí ðåæèì). Ïðîâåðåòå çàãëàâèÿòà íà CD-òàòà è ïîñî÷åòå\n"
-"êóòèéêèòå ñúîòâåòñòâàùè íà CD-òàòà, ñ êîèòî ðàçïîëàãàòå. Öúêíåòå \"OK\",\n"
-"êîãàòî ñòå ãîòîâè äà ïðîäúëæèòå.\n"
-"\n"
-"Ïàêåòèòå ñà ïîäðåäåíè â ãðóïè ñúîòâåòñòâàùè íà ïðàêòè÷åñêàòà óïîòðåáà íà\n"
-"ìàøèíàòà âè. Ãðóïèòå, ñàìè ïî ñåáå ñè, ñà ïîäðåäåíè â ÷åòèðè ñåêöèè:\n"
-"\n"
-" * \"Ðàáîòíà ñòàíöèÿ\": àêî ñìÿòàòå äà èçïîëçâàòå ìàøèíàòà ñè êàòî ðàáîòíà "
-"ñòàíöèÿ,\n"
-"èçáåðåòå åäíà èëè ïîâå÷å ñúîòâåòíèòå ãðóïè.\n"
-"\n"
-" * \"Ðàçðàáîòêà\": àêî ìàøèíàòà âè ùå áúäå èçïîëçâàíå çà ïðîãðàìèðàíå, "
-"èçáåðåòå\n"
-"æåëàíàòà(èòå) ãðóïà(è).\n"
-"\n"
-" * \"Ñúðâúð\": íàêðàÿ, àêî ìàøèíàòà âè ùå áúäå èçïîëçâàíà çà ñúðâúð, ùå\n"
-"ìîæåòå äà èçáåðåòå êîè îò íàé-÷åñòî èçïîëçâàíèòå óñëóãè èñêàòå äà èìàòå\n"
-"èíñòàëèðàíè íà ìàøèíàòà.\n"
-"\n"
-" * \"Ãðàôè÷íà ñðåäà\": òóê ìîæåòå äà èçáåðåòå ïðåäïî÷èòàíàòà ãðàôè÷íà "
-"ñðåäà.\n"
-"Ïîíå åäíà òðÿáâà äà áúäå èçáðàíà, àêî èñêàòå äà èìàòå ãðàôè÷íà ñðåäà !\n"
-"\n"
-"Ïðåìåñòâàéêè êóðñîðà íà ìèøíàòà íàä èìåòî íà ãðóïàòà, ùå âèäèòå êðàòúê\n"
-"îáÿñíåíèòåëåí òåêñò çà íåÿ.\n"
-"\n"
-"Ìîæåòå äà öúêíåòå êóòèéêàòà \"Èíäèâèäóàëåí èçáîð íà ïàêåòè\", êîÿòî å "
-"ïîëåçíà,\n"
-"àêî ñòå çàïîçíàòè ñ ïàêåòèòå, êîèòî ùå âè áúäàò ïðåäëîæåíè èëè àêî èñêàòå "
-"äà\n"
-"èìàòå ïúëåí êîíòðîë íàä òîâà, êîåòî äà áúäå èíñòàëèðàíî.\n"
-"\n"
-"Àêî ñòå çàïî÷íàëè èíñòàëàöèÿòà â ðåæèì íà \"Îáíîâÿâàíå\", ìîæåòå äà "
-"èçêëþ÷èòå\n"
-"âñè÷êè ãðóïè, çà äà èçáåãíåòå èíñòàëèðàíåòî íà íîâè ïàêåòè. Òîâà å ïîëåçíî\n"
-"ïðè ïîïðàâêà èëè îáíîâÿâàíå íà ñúùåñòâóâàùàòà ñèñòåìà."
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Íàêðàÿ, â çàâèñèìîñò îò èçáîðà âè äàëè äà èçáèðàòå ïàêåòè åäèí ïî åäèí, ùå\n"
-"âè áúäå ïðåäñòàâåíî äúðâî ñúäúðæàùî âñè÷êè ïàêåòè ïîäðåäåíè ïî ãðóïè è\n"
-"ïîäðãðóïè. Äîêàòî îáõîæäàòå äúðâîòî, ìîæåòå äà èçáåðåòå öåëè ãðóïè, "
-"ïîäãðóïè\n"
-"èëè îòäåëíè ïàêåòè.\n"
-"\n"
-"Êîãàòî ïîñî÷èòå ïàêåò îò äúðâîòî, ùå ñå ïîÿâè îïèñàíèå âäÿñíî. Êîãàòî\n"
-"èçáîðúò å ïðèêëþ÷åí, öúêíåòå áóòîíà \"Èíñòàëèðàé\", êîéòî ùå ïóñíå ïðîöåñà\n"
-"íà èíñòàëàöèÿ. Â çàâèñèìîñò îò ñêîðîñòòà íà õàðäóåðà âè è áðîÿ íà ïàêåòèòå,\n"
-"êîèòî èñêàòå äà áúäàò èíñòàëèðàíè, ïðîöåñúò ìîæå äà îòíåìå èçâåñòíî âðåìå.\n"
-"Î÷àêâàíîòî âðåìå çà ïðèêëþ÷âàíå íà ïðîöåñà, ÷å áúäå ïîêàçàíî íà åêðàòà, çà\n"
-"äà âè ïîìîãíå äà ïðåöåíèòå äàëè èìàòå äîñòàòú÷íî âðåìå äà ñå íàñëàäèòå íà\n"
-"÷àøà êàôå.\n"
-"\n"
-"!! Àêî å èçáðàí ñúðâúðåí ïàêåò, áèëî òî óìèøëåíî èëè çàùîòî å ÷àñò îò öÿëà\n"
-"ãðóïà, ùå áúäåòå ïîìîëåíè çà ïîòâúðæäåíèå, ÷å íàèñòèíà èñêàòå òîçè ñúðâúð\n"
-"äà áúäå èíñòàëèðàí.  Mandrake Linux, âñè÷êè ñúðâúðè òðúãâàò ïî "
-"ïîäðàçáèðàíå\n"
-"ïðè çàðåæäàíå.Äàæå àêî ñà ñèãóðíè è íÿìàò èçâåñòíè ïðîáëåìè, êîãàòî\n"
-"äèñòðèáóöèÿòà ñå ðàçïðîñòðàíÿâà, ìîæå äà ñå ñëó÷è òàêà, ÷å äà ñå ïîÿâÿò\n"
-"äóïêè â ñèãóðíîñòòà, ñëåä êàòî âåðñèÿòà íà Mandrake Linux å çàâúðøåíà. Àêî\n"
-"íå çíàåòå çà êàêâî ñëóæè îïðåäåëåíà óñëóãà èëè çàùî å èíñòàëèðàíà, öúêíåòå\n"
-"\"Íå\". Ñ öúêàíå íà \"Äà\"  ùå èíñòàëèðàòå èçáðîåíè óñëóãè è òå ùå áúäàò\n"
-"ñòàðòèðàíè àâòîìàòè÷íî ïî ïîäðàçáèðàíå. !!\n"
-"\n"
-"Îïöèÿòà \"Àâòîìàòè÷íè çàâèñèìîñòè\" èçêëþ÷âà ïðåäóïðåäèòåëíèòå äèàëîçè,\n"
-"êîãàòî èíñòàëàòîðúò àâîìàòè÷íî ðåøè èçáåðå ïàêåò. Òîâà ñå ñëó÷âà, çàùîòî\n"
-"å ðåøèë, ÷å ñå íóæäàå äà çàäîâîëè çàâèñèìîñò ñ äðóã ïàêåò, çà äà ïðèêëþ÷è\n"
-"óñïåøíî èíñòàëàöèÿòà.\n"
-"\n"
-"Ìàëêàòà èêîíêà íà äèñêåòêà â äúíîòî íà ñïèñúêà ïîçâîëÿâà äà çàðåäèòå ñïèñúê\n"
-"ñ ïàêåòè îò ïðåäèøíà èíñòàëàöèÿ. Àêî öúêíåòå íà òàçè èêîíêà, ùå áúäåòå\n"
-"ïîìîëåíè äà âêàðàòå äèñêåòà ñúçäàäåíà ïðåäè òîâà â êðàÿ íà äðóãà "
-"èíñòàëàöèÿ.\n"
-"Âèæòå âòîðàòà ïîäñêàçêà ïî âðåìå íà ïîñëåäíàòà ñòúïêà, çà òîâà êàê äà\n"
-"ñúçäàäåòå òàêàâà äèñêåòà."
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Àêî èñêàòå äà ñâúðæåòå êîìïþòúðà ñè êúì Èíòåðíåò èëè êúì ëîêàëíà ìðåæà, "
-"ìîëÿ\n"
-"èçáåðåòå ïîäõîäÿùàòà îïöèÿ. Ìîëÿ, âêëþ÷åòå óñòðîéñòâîòî ñè ïðåäè äà "
-"èçáåðåòå\n"
-"îïöèÿòà, çà äà äàäåòå âúçìîæíîñò íà DrakX äà ãî çàñå÷å.\n"
-"\n"
-"Mandrake Linux èçâúðøâà íàñòðîéêàòà íà Èíòåðíåò âðúçêàòà ïî âðåìå íà\n"
-"èíñòàëàöèÿ. Äîñòúïíèòå âðúçêè: îáèêíîâåí ìîäåì, ISDN ìîäåì, ADSL âðúçêà,\n"
-"êàáåëåí ìîäåì è íàêðàÿ îáèêíîâåíà LAN âðúçêà (Ethernet).\n"
-"\n"
-"Òóê íÿìà ïîäðîáíî äà ðàçãëåæäàìå âñÿêà íàñòðîéêà. Ïðîñòî áúäåòå ñèãóðíè, ÷å\n"
-"èìàòå äîñòàòú÷íî äàííè îò Èíòåðíåò äîñòàâ÷èêà ñè èëè ñèñòåìíèÿ\n"
-"àäìèíñèòðàòîð.\n"
-"\n"
-"Ìîæåòå äà ñå êîíñóëòèðàòå ñ ãëàâàòà â ðúêîâîäñòâîòî çà Èíòåðíåò âðúçêèòå çà\n"
-"ïîäðîáíîñòè çà íàñòðîéêàòà èëè ïðîñòî èç÷àêàéòå ñèñòåìàòà âè äà áúäå\n"
-"èíñòàëèðàíà è èçïîëçâàéòå ïðîãðàìàòà îïèñàíà òàì, çà äà íàñòðîèòå âðúçêàòà.\n"
-"\n"
-"Àêî èñêàòå äà íàñòðîèòå ìðåæàòà ïî-êúñíî ñëåä èíñòàëàöèÿ èëè àêî ñòå "
-"ñâúðøèëè\n"
-"ñ íàñòðîéêàòà íà ìðåæàòà, öúêíåòå \"Îòêàç\"."
-
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Ñåãà ìîæåòå äà èçáåðåòå êîè óñëóãè äà ñå ïóñêàò ïðè ñòàðòèðàíå.\n"
-"\n"
-"Òóê ñà ïðåäñòàâåíè âñè÷êè óñëóãè, äîñòúïíè ñ íàñòîÿùàòà èíñòàëàöèÿ.\n"
-"Ïðåãëåäàéòå ãè âíèìàòåëíî è èçêëþ÷åòå òåçè, êîèòî íå âè òðÿáâàò âèíàãè ïðè "
-"ñòàðòèðàíå.\n"
-"\n"
-"Ìîæåòå âèäèòå êðàòúê îáÿñíèòåëåí òåêñò çà óñëóãàòà, êàòî ïîñòàâèòå êóðîðà íà "
-"ìèøêàòà ñè\n"
-"íàä èìåòî íà óñëóãàòà. Àêî íå ñòå ñèãóðíè, äàëè óñëóãàòà å ïîëåçíà èëè íå, "
-"ïî-äîáðå\n"
-"å äà îñòàâèòå èçáîðà ïî ïîäðàçáèðàíå.\n"
-"\n"
-"Âíèìàâàéòå ñ òàçè ñòúïêà, àêî ñìÿòàòå äà èçïîëçâàòå ìàøèíàòà ñè êàòî "
-"ñúðâúð:\n"
-"ñèãóðíî íå áèõòå èñêàëè äà ïóñêàòå óñëóãè, îò êîèòî íå ñå íóæäàåòå. Ìîëÿ,\n"
-"çàïîìíåòå, ÷å íÿêîè óñëóãè ìîãàò äà áúäàò îïàñíè, àêî ñà âêëþ÷åíè íà "
-"ñúðâúðà.\n"
-"Ïî ïðèíöèï, èçáèðàéòå ñàìî óñëóãèòå, îò êîèòî íàèñòèíà ñå íóæäàåòå."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux ðàáîòè ñ âðåìå ïî GMT (Âðåìå ïî Ãðèíóè÷)\n"
-"è ãî ïðåâåæäà â ëîêàëíî âðåìå â çàâèñèìîñò îò çîíàòà, êîÿòî ñòå èçáðàëè."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-"X (îð X Window System) å ñúðöåòî íà GNU/Linux ãðàôè÷íèÿ èíòåðôåéñ, íà êîéòî\n"
-"ñå îñëàíÿò ãðàôè÷íèòå ñðåäè (KDE, Gnome, AfterStep, WindowMaker...) "
-"ñâúðçàíè\n"
-"ñ Mandrake Linux.  òàçè ñåêöèÿ, DrakX ùå ñå àâòîìàòè÷íî äà íàñòðîè X.\n"
-"\n"
-"Èçêëþ÷èòåëíî ðÿäêî ñå ñëó÷âà äà ñå ïðîâàëè, îñâåí àêî õàðäóåðúò íå å ìíîãî\n"
-"ñòàð (èëè ïðåêàëåíî íîâ). Àêî óñïåå, ùå ñòàðòèðà X àâòîìàòè÷íî ñ íàé-"
-"äîáðàòà\n"
-"ðàçäåëèòåëíà ñïîñîáíîñò â çàâèñèìîñò îò ãîëåìèíàòà íà ìîíèòîðà âè. Ùå ñå\n"
-"ïîÿâè ïðîçîðåö, çà äà âè ïîïèòà äàëè ãî âèæäàòå.\n"
-"\n"
-"Àêî èçâúðøâàòå \"Åêñïåðòíà\" èíñòàëàöèÿ, ùå áúäåòå âúâåäåíè â ìàãüîñíèêà çà\n"
-"íàñòðîéêà íà X. Âèæòå ñúîòâåòíàòà ñåêöèÿ íà ðúêîâîäñòâîòî çà ïîâå÷å\n"
-"èíôîðìàöèÿ çà ìàãüîñíèêà.\n"
-"\n"
-"Àêî âèäèòå ñúîáùåíèåòî, íàòèñíåòå \"Äà\", ñëåä êîåòî DrakX ùå ïðîäúëæè ñúñ\n"
-"ñëåäâàùàòà ñòúïêà. Àêî íå âèäèòå ñúîáùåíèåòî, òîâà îçíà÷àâà, ÷å íàñòðîéêàòà\n"
-"å ñãðåøåíà è òåñòúò àâòîìàòè÷íî ùå áúäå ïðèêëþ÷åí ñëåä 10 ñåêóíäè,\n"
-"âúçñòàíîâÿâàéêè åêðàíà."
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Ïúðâèÿ ïúò, êîãàòî îïèòàòå íàñòðîéêàòà íà X, ìîæå áè íÿìà äà ñòå äîâîëíè îò\n"
-"îò âèäà (åêðàíúò å ïðåêàëåíî ìàëúê, îòìåñòåí íàëÿâî èëè íàäÿñíî...). "
-"Âúïðåêè\n"
-"òîâà, äàæå àêî X òðúãíå êàòî õîðàòà, DrakX ùå âè ïîïèòà äàëè íàñòðîéêàòà âè\n"
-"äîïàäà. Ñúùî òàêà, ÷å âè ïðåäëîæè ïðîìÿíà, êàòî ïîêàæå ñïèñúê íà âàëèäíè\n"
-"ðåæèìè, êîèòî å óñïÿë äà íàìåðè, ñ ìîëáà äà ïîñî÷èòå åäèí.\n"
-"\n"
-"Êàòî ïîñëåäíà âúçìîæíîñò, àêî âñå îùå íå ìîæåòå äà ïîäêàðàòå X, èçáåðåòå\n"
-"\"Ïðîìÿíà íà ãðàôè÷íàòà êàðòà\", ïîñî÷èòå \"Íåèçáðîåíà êàðòà\", è, êîãàòî\n"
-"áúäåòå ïîïèòàíè êîé ñúðâúð äà áúäå èçïîëçâàí, èçáåðåòå \"FBDev\". Òîâà å\n"
-"áåçãðåøíà îïöèÿ, êîÿòî ðàáîòè íà âñÿêà ïî-íîâà êàðòà. Òîãàâà èçáåðåòå "
-"\"Îïèòàé ïàê\", çà äà ñòå ñèãóðíè."
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Íàêðàÿ, ùå áúäåòå ïîïèòàíè äàëè èñêàòå äà âèæäàòå ãðàôè÷íèÿ èíòåðôåéñ ïðè\n"
-"çàðåæäàíå. Îòáåëåæåòå, ÷å òîçè âúïðîñ ùå âè áúäå çàäàäåí äàæå àêî èçáåðåòå,\n"
-"äà íå òåñòâàòå íàñòðîéêàòà. Î÷åâèäíî, áèõòå îòãîâîðèëè ñ \"Íå\", àêî "
-"ìàøèíàòà\n"
-"ùå ðàáîòè êàòî ñúðâúð èëè àêî íÿìà óñïåøíî íàñòðîåí äèñïëåé."
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux CDROM-úò èìà âãðàäåí ñïàñèòåëåí ðåæèì. Ìîæåòå äà ãî\n"
-"äîñòèãíåòå, êàòî ñòàðòèðàòå îò CDROM-à, íàòèñíåòå êëàâèøà >>F1<< è íàïèøåòå\n"
-">>rescue<<. Íî ñëó÷àé, ÷å êîìïþòúðúò íå ìîæå äà ñòàðòèðà îò CDROM, ùå "
-"òðÿáâà\n"
-"äà ñå âúðíåòå êúì òàçè ñòúïêà çà ïîìîù â ïîíå äâå ñèòóàöèè:\n"
-"\n"
-" * êîãàòî èñíòàëèðàòå boot loader, DrakX ùå ïðåçàïèøå ñòàðòîâèÿ ñåêòîð "
-"(MBR)\n"
-"íà ãëàâíèÿ âè äèñê (îñâåí àêî íå èçïîëçâàòå äðóã ñòàðòîâ ìåíèäæúð), òàêà ÷å\n"
-"äà ñòàðòèðàòå Windows èëè GNU/Linux (àêî èìàòå Windows â ñèñòåìàòà ñè). Àêî\n"
-"ñå íóæäàåòå äà ïðåèíñòàëèðàòå Windows, èíñòàëàöèîííèÿ ïðîöåñ íà Microsoft\n"
-"ùå ïðåçàïèøå ñòàðòîâèÿ ñåêòîð è íÿìà äà ìîæåòå äà ïóñíåòå âàøèÿ GNU/Linux!\n"
-"\n"
-" * àêî ñå ïîÿâè ïðîáëåì è íå ìîæåòå äà ïóñíåòå GNU/Linux îò òâúðäèÿ ñè "
-"äèñê,\n"
-"òàçè äèñêåòà ùå èìà çà öåë ñàìî äà ñòàðòèðà GNU/Linux. Òÿ ñúäúðæà "
-"çàäîâîëèòåëåí\n"
-"áðîé ñèñòåìíè èíñòðóìåíòè çà âúçñòàíîâÿâàíå íà ñèñòåìà, êîÿòî å çàáèëà ñëåä\n"
-"ñðèâ â çàõðàíâàíåòî, ñëó÷àéíà ãðåøêà, ãðåøêà â ïàðîëàòà èëè íÿêàêâà äðóãà\n"
-"ïðè÷èíà.\n"
-"\n"
-"Êîãàòî öúêíåòå íà òàçè ñòúïêà, ùå áúäåòå ïîìîëåíè äà ïîñòàâèòå äèñê â\n"
-"óñòðîéñòâîòî. Äèñêåòàòà, êîÿòî âêàðàòå, òðÿáâà äà áúäå ïðàçíà èëè äà "
-"ñúäúðæà\n"
-"äàííè, îò êîèòî íå ñå íóæäàåòå. Íÿìà íóæäà äà ÿ ôîðìàòèðàòå, òúé êàòî DrakX\n"
-"ùå ïðåçàïèøå öÿëàòà äèñêåòà."
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Â òîçè ìîìåíò òðÿáâà èçáåðåòå êúäå íà òâúðäèÿ ñè äèñêà äà èíñòàëèðàòå "
-"âàøàòà\n"
-"Mandrake Linux îïåðàöèîííà ñèñòåìà. Àêî òâúðäèÿò âè äèñê å ïðàçåí èëè äðóãà\n"
-"îïåðàöèîííà ñèñòåìà èçïîëçâà öÿëîòî ïðîñòðàíñòâî, ùå òðÿáâà äà ãî "
-"ðàçäåëèòå.\n"
-"Êàçàíî ïðîñòè÷êî, ðàçäåëÿíåòî íà òâúðäèÿ äèñê ñå ñúñòîè â ëîãè÷åñêî "
-"ðàçäåëÿíå\n"
-"öåë äà ñå ñúçäàäå ìÿñòî çà èíñòàëàöèÿ íà íîâàòà Mandrake Linux ñèñòåìà.\n"
-"\n"
-"Òúé êàòî ïðîöåñúò íà ðàçäåëÿíå îáèêíîâåíî å íåîáðàòèì, ðàçäåëÿíåòî ìîæå äà\n"
-"èçãëåæäà ïëàøåù è ñòðÿñêàù, àêî ñòå íåîïèòåí ïîòðåáèòåë. Ñëàâà Áîãó, èìà\n"
-"ìàãüîñíèê, êîéòî îïðîñòÿâà òîçè ïðîöåñ. Ïðåäè äà çàïî÷íåòå, êîíñóëòèðàéòå "
-"ñå\n"
-"ñ ðúêîâîäñòâîòî è íå áúðçàéòå.\n"
-"\n"
-"Àêî ïóñêàòå èíñòàëàöèÿòà â Åêñïåðòåí ðåæèì, ùå áúäåòå âúâåäåíè â DiskDrake,\n"
-"ðàçäåëÿùèÿ èíñòðóìåíò íà Mandrake Linux, êîéòî âè ïîçâîëÿâà äà äîíàñòðîèòå\n"
-"äÿëîâåòå ñè. Âèæòå ãëàâàòà DiskDrake îò ðúêîâîäñòâîòî. Îò èíñòàëàöèîííèÿ\n"
-"èíòåðôåéñ ìîæåòå äà èçïîëçâàòå ìàãüîñíèöèòå, êàòî íàòèñíåòå áóòîíà\n"
-"\"Ìàãüîñíèê\" íà äèàëîãà.\n"
-"\n"
-"Àêî äÿëîâåòå ñà âå÷å îïðåäåëåíè, äàëè îò ïðåäèøíà èíñòàëàöèÿ èëè îò äðóã\n"
-"èñòðóìåíò çà ðàçäåëÿíå, ïðîñòî èçáåðåòå íà êîé äà èíñòàëèðàòå Linux\n"
-"ñèñòåìàòà.\n"
-"\n"
-"Àêî äÿëîâåòå íå ñà îïðåäåëåíè, ùå òðÿáâà äà ñúçäàäåòå òàêèâà èçïîëçâàéêè\n"
-"ìàãüîñíèêà. Â çàâèñèìîñò îò íàñòðîéêàòà íà òâúðäèÿ äèñê, ñà âúçìîæíè "
-"íÿêîëêî\n"
-"îïöèè:\n"
-"\n"
-" * \"Èçïîëçâàé ñâîáîäíîòî ïðîñòðàíñòâî\": òàçè îïöèÿ ïðîñòî ùå äîâåäå òî\n"
-"àâòîìàòè÷íî ïîäåëÿíå íà ïðàçíîòî ïðîñòðàíñòâî íà òâúðäèÿ âè äèñê. Íÿìà äà\n"
-"áúäåòå ïèòàíè çà òîâà.\n"
-"\n"
-" * \"Èçïîëçâàé ñúùåñòâóâàù äÿë\": ìàãüîñíèêúò å çàñÿêúë åäèí èëè ïîâå÷å\n"
-"ñúùåñòâóâàùè Linux äÿëîâå íà òâúðäèÿ âè äèñê. Àêî èñêàòå äà ãè èçïîëçâàòå,\n"
-"èçáåðåòå òàçè îïöèÿ.\n"
-"\n"
-" * \"Èçïîëçâàé ñâîáîäíîòî ïðîñòðàíñòâî íà Windows äÿë\": àêî èìàòå "
-"èíñòàëèðàí\n"
-"Microsoft Windows íà òâúðäèÿ ñè äèñê è òîé çàåìà öÿëîòî äîñòúïíî\n"
-"ïðîñòðàíñòâî íà íåãî, òðÿáâà äà îñâîáîäèòå ìÿñòî çà Linux äàííè. Çà äà\n"
-"íàïðàâèòåòîâà, ìîæåòå äà èçòðèåòå Microsoft Windows äÿëà è äàííèòå (âèæòå\n"
-"ðåøåíèÿòà \"Èçòðèé öåëèÿ äèñê\" èëè \"Åêïåðòåí ðåæèì\") èëè äà ïðîìåíèòå\n"
-"ãîëåìèíàòà íà Microsoft Windows äÿëà. Ïðîìÿíàòà íà ãîëåìèíàòà ìîæå äà áúäå\n"
-"èçâúðøåíà áåç çàãóáà íà äàííè. Òîâà ðåøåíèå ñå ïðåïîðú÷âà, àêî èñêàòå\n"
-"åäíîâðåìåííî Mandrake Linux è Microsoft Windows íà åäèí è ñúùè êîìïþòúð.\n"
-"\n"
-"   Ïðåäè äà èçáåðåòå òàçè îïöèÿ, ìîëÿ, ðàçáåðåòå, ÷å ñëåä òàçè ïðîöåäóðà,\n"
-"ãîëåìèíàòà íà Microsoft Windows äÿëà ùå áúäå ïî-ìàëêà, îòêîëêîòî ïðåäè "
-"òîâà.\n"
-"Ùå èìàòå ïî-ìàëêî ìÿñòî ïîä Microsoft Windows çà ñúõðàíÿâàíå íà äàííè èëè "
-"çà\n"
-"èíñòàëèðà íà íîâ ñîôòóåð.\n"
-"\n"
-" * \"Èçòðèé öåëèÿ äèñê\": àêî èñêàòå äà èçòðèåòå âñè÷êè äàííè è äÿëîâå, "
-"êîèòî\n"
-"ñúùåñòâóâàò íà âàøèÿ òâúðä äèñê è äà ãè çàìåíèòå ñ íîâàòà Mandrake Linux\n"
-"ñèñòåìà, èçáåðåòå òàçè îïöèÿ. Áúäåòå âíèìàòåëíè ñ òîâà ðåøåíèÿ, çàùîòî íÿìà\n"
-"äà ìîæåòå äà âúðíåòå îáðàòíî èçáîðà ñè, ñëåä êàòî ïîòâúðäèòå.\n"
-"\n"
-"   !! Àêî èçáåðåòå òàçè îïöèÿ, âñè÷êè äàííè íà äèñêà âè ùå áúäàò "
-"çàãóáåíè !!\n"
-"\n"
-" * \"Èçòðèé Windows\": Òîâà ïðîñòî ùå èçòðèå âñè÷êî íà äèñêà è ùå çàïî÷íå "
-"íà\n"
-"÷èñòî, ðàçäåëÿíå îò ðàç. Âñÿêàêâè äàííè íà äèñêà âè ùå áúäàò çàãóáåíè.\n"
-"\n"
-"   !! Àêî èçáåðåòå òàçè îïöèÿ, âñè÷êè äàííè íà äèñêà âè ùå áúäàò "
-"çàãóáåíè !!\n"
-"\n"
-" * \"Åêñïåðòåí ðåæèì\": èçáåðåòå òàçè îïöèÿ, àêî èñêàòå ðú÷íî äà ðàçäåëèòå\n"
-"òâúðäèÿ ñè äèñê. Áúäåòå âíèìàòåëíè - òîâà å ìîùåí, íî îïàñåí èçáîð. Ìîæåòå\n"
-"ìíîãî ëåñíî äà çàãóáèòå âñè÷êè äàííè. Òàêà ÷å íå èçáèðàéòå òîâà, àêî íå\n"
-"çíàåòå êàêâî ïðàâèòå."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"À òàêà ! Èíñòàëàöèÿòà å çàâúðøåíà è GNU/Linux ñèñòåìàòà âè å ãîòîâà çà\n"
-"óïîòðåáà. Ïðîñòî öúêíåòå \"OK\", çà äà ðåñòàðòèðàòå ñèñòåìàòà. Ìîæåòå äà\n"
-"ñòàðòèðàòå GNU/Linux èëè Windows, êîåòî ïðåäïî÷èòàòå (àêî èìàòå äâå "
-"ñèñòåìè),\n"
-"âåäíàãà ñëåä êàòî êîìïþòúðúò ñòàðòèðà îòíîâî.\n"
-"\n"
-"Áóòîíà \"Íàïðåäíè÷àâ\" (ñàìî â \"Åêñïåðòåí\") ïîêàçâà îùå äâà áóòîíà çà:\n"
-"\n"
-" * \"ãåíåðèðàíå íà äèñêåòà çà àâòîìàòè÷íà èíñòàëàöèÿ\": çà äà ñúçäàäåòå\n"
-"èíñòàëàöèîííà äèñêåòà, êîÿòî ñëåä òîâà àâòîìàòè÷íî äà èç÷úðøâà öÿëàòà\n"
-"èíñòàëàöèÿ áåç ïîìîùòà íà îïåðàòîð, ïðèëè÷àùà íà èíñòàëàöèÿòà, êîÿòî òîêó-"
-"ùî\n"
-"ñòå èçâúðøèëè.\n"
-"\n"
-"   Îòáåëåæåòå, ÷å äâå ðàçëè÷íè îïöèè ñà äîñòúíè, ÷ðåç öúêàíå íà áóòîíà:\n"
-"\n"
-"    * \"Ïðåèãðàé\". Òîâà å ÷àñòè÷íî àâòîìàòèçèðàíà èíñòàëàöèÿ êàòî ñòúïêèòå\n"
-"ïî ðàçäåëÿíå íà äÿëîâå îñòàâàò èíòåðàêòèâíè.\n"
-"\n"
-"    * \"Àâòîìàòè÷íà\". Íàïúëíî àâòîìàòè÷íà èíñòàëàöèÿ: òâúðäèÿò äèñê ñå\n"
-"ïðåçàïèñâà íàïúëíî, âñÿêàêâè äàííè ñå çàãóáâàò.\n"
-"\n"
-"   Òàçè îñîáåíîñò å ìíîãî óäîáíà, êîãàòî èíñòàëèðàòå ãîëÿì áðîé ïîäîáíî\n"
-"ìàøèíè. Âèæòå ñåêöèÿòà çà àâòîìàòè÷íà èíñòàëàöèÿ íà íàøèÿ web-ñàéò.\n"
-"\n"
-"    * \"Çàïàçè èçáîðà íà ïàêåòè\"(*): çàïàçâà èçáîðà íà ïàêåòè, òàêà êàêòî "
-"å\n"
-"íàïðàâåí ïðåäè. Êîãàòî ïðàâèòå äðóãà èíñòàëàöèÿ, âêàðàéòå äèñêåòàòà â\n"
-"óñòðîéñòâîòî è ïóñíåòå èíñòàëàöèÿòà äà âúðâè ÷ðåç ïîìîùíèÿ åêðàí, êàòî\n"
-"íàòèñíåòå êëàâèøà [F1] è êàòî íàïèøåòå >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Òðÿáâà âè FAT-ôîðìàòèðàíà äèñêåòà (çà äà ñúçäàäåòå òàêâà ïîä GNU/Linux,\n"
-"íàïèøåòå \"mformat a:\")"
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Âñè÷êè íîâîäåôèíèðàíè äÿëîâå òðÿáâà äà áúäàò ôîðìàòèðàíè, çà äà ñå "
-"èçïîëçâàò\n"
-"(ôîðìàòèðàíå îçíà÷àâà ñúçäàâàíå íà ôàéëîâà ñèñòåìà).\n"
-"\n"
-"Â òîçè ìîìåíòà ìîæå áè èñêàòå äà ïðåôîðìàòèðàòå íÿêîè ñúùåñòâóâàùè äÿëîâå, "
-"çà\n"
-"äà èçòðèåòå âñÿêàêâè äàííè, êîèòî ñúäúðæàò. Àêî èñêàòå äà ãî íàïðàâèòå, "
-"ìîëÿ\n"
-"èçáåðåòå òÿõ.\n"
-"\n"
-"Ìîëÿ, îòáåëåæåòå, ÷å íå å íåîáõîäèìî äà ïðåôîðìàòèðàòå âñè÷êè äÿëîâå\n"
-"ñúùåñòâóâàùè îòïðåäè. Òðÿáâà äà ïðåôîðìàòèðàòå äÿëîâåòå ñúäúðæàùè\n"
-"îïåðàöèîííàòà ñèñòåìà (êàòî \"/\", \"/usr\" èëè \"/var\"), íî òîâà íå å\n"
-"çàäúëæèòåëíî çà äÿëîâå ñúäúðæàùè äàííè, êîèòî èñêàòå äà çàïàçèòå "
-"(îáèêíîâåíî\n"
-"\"/home\").\n"
-"\n"
-"Ìîëÿ, áúäåòå âíèìàòåëíè, êîãàòî èçáèðàòå äÿëîâåòå. Ñëåä ôîðìàòèðàíå âñè÷êè\n"
-"äàííè íà ïîñî÷åíèòå äÿëîâå ùå áúäàò èçòðèòè è íÿìà äà ìîæåòå äà ãè\n"
-"âúçñòàíîâèòå.\n"
-"\n"
-"Öúêíåòå \"OK\", êîãàòî ñòå ãîòîâè äà ôîðìàòèðàòå äàëîâå.\n"
-"\n"
-"Öúêíåòå \"Îòêàç\", àêî èñêàòå äà èçáåðåòå äðóãè äÿëîâå çà èíñòàëàöèÿ íà "
-"íîâàòà\n"
-"ñè Mandrake Linux îïåðàöèîííà ñèñòåìà.\n"
-"\n"
-"Öúêíåòå \"Íàïðåäíè÷àâ\", àêî èñêàòå äà èçáåðåòå äÿëîâå, êîèòî äà áúäàò\n"
-"ïðîâåðåíè çà ëîøè áëîêîâå îò äèñêà."
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Íîâàòà âè Mandrake Linux îïåðàöèîííà ñèñòåìà â ìîìåíòà ñå èíñòàëèðà. Òàçè\n"
-"îïåðàöèÿ áè òðÿáâàëî äà îòíåìå íÿêîëêî ìèíóòè (çàâèñè îò èçáðàíàòà ãîëåìèíà "
-"íà\n"
-"èíñòàëàöèÿòà è îò ñêîðîñòòà íà êîìïþòúðà âè).\n"
-"\n"
-"Ìîëÿ, áúäåòå òúðïåëèâè."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"Ïðåäè äà ïðîäúëæèòå, òðÿáâà âíèìàòåëíî äà ïðî÷åòåòå óñëîâèÿòà íà ëèöåíçà. "
-"Òîé\n"
-"ïîêðèâà öÿëàòà Mandrake Linux äèñòðèáóöèÿ, è, àêî íå ñòå ñúãëàñíè ñ âñè÷êè "
-"óñëîâèÿ\n"
-"â íåãî, öúêíåòå íà áóòîíà Îòêàç. Òîâà íåçàáàâíî ùå ïðèêëþ÷è èíñòàëàöèÿòà. Çà "
-"äà\n"
-"ïðîäúëæèòå ñ èíñòàëàöèÿòà, öúêíåòå íà áóòîíà Ïðèåìè."
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Â òîçè ìîìåíò, òðÿáâà äà èçáåðåòå íèâîòî íà ñèãóðíîñò, êîåòî èñêàòå çà\n"
-"ìàøèíàòà. Ïî ïðàâèëî, êîëêîòî ïîâå÷å ìàøèíàòà âè å äîñòúïíà è êîëêîòî "
-"ïîâå÷å\n"
-"äàííè ñå ñúõðàíÿâàò íà íåÿ, òîëêîâà ïî-âèñîêî òðÿáâà äà å íèâîòî íà "
-"ñèãóðíîñò.\n"
-"Âúïðåêè òîâà, âèñîêàòà ñèãóðíîñò å çà ñìåòêà íà ëåêîòàòà íà ðàáîòà.\n"
-"Îáúðíåòå ñå êúì ãëàâàòà MSEC íà Reference Manual, çà äà ïîëó÷èòå ïîâå÷å "
-"èíôîðìàöèÿ\n"
-"çà çíà÷åíèåòî íà òåçè íèâà.\n"
-"\n"
-"Àêî íå çíàåòå êàêòî äà èçáåðåòå, èçáåðåòå îïöèÿòà ïî ïîäðàçáèðàíå."
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Â òîçè ìîìåíò òðÿáâà äà èçáåðåòå êîé äÿëîâå äà áúäàò èçïîëçâàíè çà "
-"èíñòàëàöèÿ\n"
-"íà âàøàòà Mandrake Linux ñèñòåìà. Àêî äÿëîâåòå âå÷å ñà îïðåäåëåíè, äàëè îò\n"
-"ïðåäèøíà èíñòàëàöèÿ íà GNU/Linux èëè îò äðóã èíñòðóìåíò çà ðàçäåëÿíå, "
-"ìîæåòå\n"
-"äà èçïîëçâàòå ñúùåñòâóâàùèòå äàëîâå.  ïðîòèâåí ñëó÷àé òðÿáâà äà îïðåäåëèòå\n"
-"äÿëîâå îò òâúðäèÿ äèñê.\n"
-"\n"
-"Çà äà ñúçäàäåòå äÿëîâå, òðÿáâà ïúðâî äà èçáåðåòå òâúðä äèñê. Ìîæåòå äà\n"
-"èçáåðåòå äèñê çà ðàçäåëÿíå, êàòî öúêíåòå íà \"hda\" çà ïúðâî IDE "
-"óñòðîéñòâî,\n"
-"\"hdb\" çà âòîðîòî, \"sda\" çà ïúðâî SCSI óñòðîéñòâî è ò.í..\n"
-"\n"
-"Çà äà ðàçäåëèòå èçáðàíèÿ òâúð äèñê, ìîæåòå äà èçïîëçâàòå ñëåäíèÿ îïöèè:\n"
-"\n"
-" * \"Èç÷èñòè âñè÷êî\": òàçè îïöèÿ èçòðèâà âñè÷êè äÿëîâå íà èçáðàíèÿ äèñê.\n"
-"\n"
-" * \"Àâòîìàòè÷íî ñúçäàâàíå\": òàçè îïöèÿ ïîçâîëÿâà àâòîìàòè÷íî äà ñúçàäåòå\n"
-"Ext2 è swap äÿëîâå â ñâîáîäíîòî ïðîñòðàíñòâî íà òâúðäèÿ âè äèñê.\n"
-"\n"
-" * \"Ñïàñè òàáëèöàòà ñ äÿëîâå\": àêî òàáëèöàòà ñ äÿëîâå å ïîâðåäåíà, ìîæåòå\n"
-"äà ñå îïèòàòå äà ÿ âúçñòàíîâèòå ñ òàçè îïöèÿ. Ìîëÿ, áúäåòå âíèìàòåëíè è\n"
-"ïîìíåòå, ÷å ìîæå äà íå ñòàíå.\n"
-"\n"
-" * \"Âúðíè\": èçïîëçâàéòå òàçè îïöèÿ, çà äà îòìåíèòå ïðîìåíèòå.\n"
-"\n"
-" * \"Ïðåçàðåäè\": ìîæåòå äà èçïîëçâàòå òàçè îïöèÿ, àêî èñêàòå äà âúðíåòå\n"
-"âñè÷êè ïðîìåíè è äà çàðåäèòå ïúðâîíà÷àëíàòà òàáëèöà ñ äÿëîâå.\n"
-"\n"
-" * \"Ìàãüîñíèê\": èçïîëçâàéòå òàçè îïöèÿ, àêî èñêàòå äà èçïîëçâàòå "
-"ìàãüîñíèê,\n"
-"äà ðàçäåëè òâúðäèÿ âè äèñê. Òîâà ñå ïðåïîðú÷âà, àêî íÿìàòå äîñòàòú÷íî "
-"ïîçíàíèÿ\n"
-"çà ðàçäåëÿíåòî.\n"
-"\n"
-" * \"Âúçñòàíîâè îò äèñêåòà\": òàçè îïöèÿ ùå âè ïîçâîëè äà âúçñòàíîâèòå "
-"çàïàçåíà\n"
-"ïðåäè òîâà íà äèñêåòà òàáëèöà ñ äÿëîâå.\n"
-"\n"
-" * \"Çàïàçè íà äèñêåòà\": çàïàçâà òàáëèöàòà ñ äÿëîâå íà äèñêåòà. Ïîëåçíî å "
-"ïðè\n"
-"åâåíòóàëíî âúçñòàíîâÿâàíå íà òàáëèöàòà ïðè íåîáõîäèìîñò. Ñèëíî ñå "
-"ïðåïîðú÷âà\n"
-"äà íàïðàâèòå òîâà.\n"
-"\n"
-" * \"Ãîòîâî\": êîãàòî ñòå ñâúðøèëè ñ ðàçäåëÿíåòî íà òâúðäèÿ ñè äèñê, òîâà "
-"ùå\n"
-"çàïèøå ïðîìåíèòå âúðõó äèñêà.\n"
-"\n"
-"Çàáåëåæåòà: ìîæåòå äà äîñòèãíåòå âñÿêà îïöèÿ èçïîëçâàéêè êëàâèàòóðàòà.\n"
-"Ìèíàâàéòå ïðåç äÿëîâåòå èçïîëçâàéêè [Tab} è ñòðåëêèòå íàãîðå/íàäîëó.\n"
-"\n"
-"Êîãàòî å èçáðàí äÿë, ìîæåòå äà èçïîëçâàòå:\n"
-"\n"
-" * Ctrl-c, çà äà ñúçäàäåòå íîâ äÿë (àêî å èçáðàí ïðàçåí äÿë);\n"
-"\n"
-" * Ctrl-d, çà äà èçòðèåòå äÿë;\n"
-"\n"
-" * Ctrl-m, çà äà óñòàíîâèòå òî÷êà íà ìîíòèðàíå.\n"
-"\n"
-"Àêî èíñòàëèòå íà PPC ìàøèíà, ñèãóðíî ùå èñêàòå äà ñúçäàäåòå ìàëúê HFS\n"
-"\"bootstrap\" äÿë îò ïîíå 1 ÌÁ, êîéòî ùå áúäå èçïîëçâàò îò boot loader-úò\n"
-"yaboot. Àêî ñìÿòàòå äà íàïðàâèòå äÿëà ïî-ãîëÿì, íàïðèìåð 50 ÌÁ, ìîæåòå äà "
-"ãî\n"
-"íàìåðèòå çà ïîëåçíî ìÿñòî, êúäåòî äà ñúõðàíÿâàòå íÿêîå ÿäðî èëè image íà\n"
-"ramdisk â ñëó÷àé íà èçâúíðåäíè ñèòóàöèè."
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Áåøå çàñå÷åí ïîâå÷å îò åäèí Microsoft Windows äÿë\n"
-"íà òâúðäèÿ âè äèñêà. Èçáåðåòå òîçè, ÷èÿòî äúëæèíà èñêàòå äà ïðîìåíèòå, çà "
-"äà\n"
-"èíñòàëèðàòå Mandrake Linux îïåðàöèîííà ñèñòåìà.\n"
-"\n"
-"\n"
-"Çà èíôîðìàöèÿ, âñåêè äÿë å èçáðîåí êàêòî ñëåäâà: \"Linux èìå\", \"Windows èìå"
-"\", \"Êàïàöèòåò\".\n"
-"\n"
-"\"Linux èìåòî\" ñå êîäèðà êàêòî ñëåäâà: \"òèï íà äèñêà\", \"íîìåð íà äèñêà"
-"\",\n"
-"\"íîìåð íà äÿë\" (íàïðèìåð, \"hda1\").\n"
-"\n"
-"\n"
-"\"Òèïúò íà äèñêà\" ìîæå äà å \"hd\", àêî å IDE òâúðä äèñê, èëè \"sd\", àêî "
-"å\n"
-"SCSI òâúðä äèñê.\n"
-"\n"
-"\n"
-"\"Íîìåðúò íà äèñêà\" âèíàãè å áóêâàòà ñëåä \"hd\" èëè \"sd\". Ïðè IDE "
-"äèñêîâå:\n"
-"\n"
-"   * \"a\" îçíà÷àâà \"master äèñê íà ïúðâèÿ IDE êîíòðîëåð\",\n"
-"   * \"b\" îçíà÷àâà \"slave äèñê íà ïúðâèÿ IDE êîíòðîëåð\",\n"
-"   * \"c\" îçíà÷àâà \"master äèñê íà âòîðèÿ IDE êîíòðîëåð\",\n"
-"   * \"d\" îçíà÷àâà \"slave äèñê íà âòîðèÿ IDE êîíòðîëåð\".\n"
-"\n"
-"\n"
-"Ïðè SCSI óñòðîéñòâà, \"a\" îçíà÷àâà \"ïúðâè òâúðä äèñê\", \"b\" îçíà÷àâà "
-"\"âòîðè òâúðä äèñê\" è ò.í..\n"
-"\n"
-"\"Windows èìåòî\" å áóêâàòà íà òâúðäèÿ âè äèñê ïîä Windows (ïúðâèÿò äèñê "
-"èëè\n"
-"äÿë ñå íàðè÷à \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Ìîëÿ, áúäåòå òúðïåëèâè. Òàçè îïåðàöèÿ ìîæå äà îòíåìå íÿêîëêî ìèíóòè."
-
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"DrakX ñåãà òðÿáâà äà ïðîâåäå èíñòàëàöèÿ ïî ïîäðàçáèðàíå (\"Ïðåïîðú÷èòåëíà"
-"\")\n"
-"èëè òàêàâà, êúäåòî èìàòå ïî-ãîëÿì êîíòðîë (\"Åêñïåðòíà\"). Âèå ñúùî òàêà\n"
-"ìîæåòå äà èçáåðåòå äà èçâúðøèòå íîâà èíñòàëàöèÿ èëè íàäãðàæäàíå íà\n"
-"ñúùåñòâóâàùà Mandrake Linux ñèñòåìà. Öúêàéêè íà \"Èíñòàëèðàé\" ùå çàòðèå\n"
-"íàïúëíî ñòàðàòà ñèñòåìà. Èçáåðåòå \"Íàäãðàäè\", àêî íàäãðàæäàòå èëè\n"
-"ïîïðàâèòå ñúùåñòâóâàùà ñèñòåìà\n"
-"\n"
-"Ìîëÿ, èçáåðåòå \"Èíñòàëèðàé\", àêî íÿìàòå èíñòàëèðàíà ïðåäèøíà âåðñè íà\n"
-"Mandrake Linux èëè àêî èñêàòå äà èçáèðàòå ìåæäó îïåðàöèîííè ñèñòåìè.\n"
-"\n"
-"Ìîëÿ, èçáåðåòå \"Íàäãðàäè\", àêî èñêàòå äà íàäãðàäèòå èëè ïîïðàâèòå âå÷å\n"
-"èíñòàëèðàíà âåðñèÿ íà Mandrake Linux.\n"
-"\n"
-"Â çàâèñèìîñò îò ïîçíàíèÿòà âè ïî GNU/Linux, ìîëÿ, èçáåðåòå åäèí îò ñëåäíèòå\n"
-"âèäîâå èíñòàëàöèÿ/íàäãðàæäàíå íà âàøàòà Mandrake Linux îïåðàöèîíí ñèñòåìà:\n"
-"\n"
-" * Ïðåïîðú÷èòåëíà: èçáåðåòå òîâà, àêî íèêîãà íå ñòå èñíòàëèðàëè GNU/Linux\n"
-"îïåðàöèîííà ñèñòåìà. Èíñòàëàöèÿòà å ìíîãî ëåñíà è ùå áúäåòå ïîïèòàíè ñàìî\n"
-"íÿêîëêî âúïðîñà.\n"
-"\n"
-" * Åêñïåðòíà:àêî èìàòå äîáðè ïîçíàíèÿ ïî GNU/Linux, ìîæåòå äà èçáåðåòå òîçè\n"
-"èíñòàëàöèîíåí êëàñ. Åêñïåðòíàòà èíñòàëàöèÿ ùå âè ïîçâîëè äà èçâúðøèòå ìíîãî\n"
-"ïîòðåáèòåëñêà èíñòàëàöèÿ. Îòãîâîðèòå íà íÿêîè âúïðîñè ìîæå äà ñà òðúäè, àêî\n"
-"íå ïîçíàâàòå äîáðå GNU/Linux, òàêà ÷å èçáåðåòå òîâà, îñâåí àêî íå çíàåòå\n"
-"êàêâî ïðàâèòå."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Îáèêíîâåíî, DrakX áè òðÿáâàëî äà èçáåðå ïðàâèëíàòà çà âàñ êëàâèàòóðà (â "
-"çàâèñèìîñò\n"
-"îò åçèêà, êîéòî ñòå èçáðàëè) è íÿìà äà ñå íàëîæè äà âèäèòå òàçè ñòúïêà. "
-"Îáà÷å ìîæå äà\n"
-"íÿìàòå êëàâèàòóðà ñúîòâåòñòâàùà òî÷íî íà âàøèÿ åçèê: íàïðèìåð, àêî ñòå "
-"àíãëîãîâîðÿù øâåä,\n"
-"ìîæå áè ùå èñêàòå êëàâèàòóðàòà âè äà áúäå øâåäñêà. Èëè àêî ãîâîðèòå "
-"aíãëèéñêè, íî ñòå\n"
-"â Êâåáåê, ìîæå áè ùå ñòå â ñúùàòà ñèòóàöèÿ. È â äâàòà ñëó÷àÿ, ùå òðÿáâà äà "
-"ñå âúðíåòå\n"
-"êúì òàçè èíñòàëàöèîííà ñòúïêà è äà èçáåðåòå ïðàâèëíàòà êëàâèàòóðà îò "
-"ñïèñúêà.\n"
-"\n"
-"Âñè÷êî, êîåòî òðÿáâà äà íàïðàâèòå, å äà ïîñî÷èòå ïðåäïî÷èòàíàòà êëàâèàòóðíà "
-"íàðåäáà\n"
-"îò ñïèñúêà, êîéòî ùå ñå ïîÿâè ïðåä âàñ.\n"
-"\n"
-"Àêî èìàòå êëàâèàòóðà îò åçèê ðàçëè÷åí îò òîçè èçïîëçâàí ïî ïîäðàçáèðàíå, "
-"öúêíåòå\n"
-"íà áóòîíà \"Íàïðåäíè÷àâ\". Ùå âè áúäå ïðåäîñòàâåí ïúëåí ñïèñúê ñ "
-"ïîääúðæàíèòå êëàâèàòóðè."
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-"Ìîëÿ, öúêíåòå íà ïðåäïî÷èòàíèÿ åçèê íà èíñòàëàöèÿ è ñèñòåìíà óïîòðåáà.\n"
-"\n"
-"Öúêàíåòî íà áóòîíà \"Íàïðåäíè÷àâ\" ùå âè ïîçâîëè äà èçáåðåòå äðóãè åçèöè\n"
-"äà áúäàò èíñòàëèðàíè íà ðàáîòíàòà âè ñòàíöèÿ. Èçáèðàíåòî íà äðóãè åçèöè\n"
-"ùå èíñòàëèðà ôàéëîâå ñïåöèâè÷íè çà åçèöèòå çà ñèñòåìíà äîêóìåíòàöèÿ è\n"
-"ïðèëîæåíèÿ. Íàïðèìåð, àêî èìàòå ïîòðåáèòåëè îò Èçïàíèÿ íà ìàøèíàòà ñè,\n"
-"èçáåðåòå àíãëèéñêè êàòî ãëàâåí åçèê â äúðâîâèäíàòà ôîðìà è â ñåêöèÿ\n"
-"\"Íàïðåäíè÷àâ\" öúêíåòå íà ñèâàòà çâåçäà ñúîòâåòñòâàùà íà\n"
-"\"Èñïàíñêè|Èñïàíèÿ\".\n"
-"Îòáåëåæåòå, ÷å ìîãàò äà áúäàò èíñòàëèðàíè íÿêîëêî åçèêà. Âåäíúæ èçáðàí\n"
-"íÿêàêúâ ëîêàë, öúêíåòå áóòîíà \"OK\", çà äà ïðîäúëæèòå."
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-"Ïî ïîäðàçáèðàíå, DrakX ïðåäïîëàãà ÷å èìàòå äâóáóòîííà ìèøêà è ùå âêëþ÷è\n"
-"ñèìóëèðàíå íà òðè áóòîíà. DrakX àâòîìàòè÷íî ðàçáèðà äàëè å PS/2, ñåðèéíà "
-"èëè\n"
-"USB ìèøêà.\n"
-"\n"
-"Àêî èñêàòå äà îïðåäåëèòå äðóã òèï íà ìèøêàòà, èçáåðåòå ïîäõîäÿù îò ñïèñúêà,\n"
-"êîéòî ùå âè áúäå ïðåäñòàâåí.\n"
-"\n"
-"Àêî èçáåðåòå ìèøêà ðàçëè÷íà îò òàçè ïî ïîäðàçáèðàíå, ùå âè áúäå ïðåäîñòàâåí\n"
-"åêðàí çà ïðîáà. Èçïîëçâàéòå áóòîíèòå è êîëåëöåòî, çà äà ïðîâåðèòå, ÷å\n"
-"íàñòðîéêàòà å äîðà. Àêî ìèøêàòà íå ðàáîòè, êàêòî òðÿáâà, íàòèñíåòå èíòåðâàë\n"
-"èëè ÑÅ ÂÚÐÍÅÒÅ êúì \"Îòêàç\" è èçáåðåòå ïàê."
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Ìîëÿ, èçáåðåòå âåðíèÿ ïîðò. Íàïðèìåð, ïîðòúò COM1 ïîä Windows ïîä GNU/Linux\n"
-"ñå íàðè÷à ttyS0."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (èëè LInux LOader) è Grub ñà bootloader-è: òå ìîãà äà ñòàðòèðàò\n"
-"GNU/Linux èëè êîÿ äà å äðóãà îïåðàöèîííà ñèñòåìà ñúùåñòâóâàùà íà êîìïþòúðà "
-"âè.\n"
-"Îáèêíîâåííî, òåçè äðóãè îïåðàöèîííè ñèñòåìà ñå çàñè÷àò è èíñòàëèðàò\n"
-"ïðàâèëíî. Àêî òîâà íå ñòàâà ïðè âàñ, ìîæåòå äà äîáàâÿòå çàïèñè íà ðúêà â\n"
-"òîçè åêðàí. Ãëåäàéòå äà èçáåðåòå âåðíè ïàðàìåòðè.\n"
-"\n"
-"\n"
-"Ìîæå äà íå èñêàòå äà äàâàòå äîñòúï äî òåçè îïåðàöèîííè ñèñòåìè íà íèêîé,\n"
-"â êîéòî ñëó÷àé ìîæåòå äà èçòðèåòå ñúîòâåòíèòå çàïèñè. Íî â òàêúâ ñëó÷àé,\n"
-"ùå ñå íóæäàåòå îò boot-äèñêåòà, çà äà ãè ñòàðòèðàòå !"
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Òðÿáâà äà ïîñî÷èòå êúäå æåëàåòå äà\n"
-"ïîñòàâèòå èíôîðìàöèÿòà, íåîáõîäèìà çà ñòàðòèðàíåòî íà GNU/Linux.\n"
-"\n"
-"Àêî íå ñòå ñèãóðíè â òîâà, êîåòî ïðàâèòå, èçáåðåòå \"Ïúðâèÿ ñåêòîð íà\n"
-"óñòðîéñòâîòî (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Èçáåðåòå òâúðäèÿ äèñê, êîéòî èñêàòå äà èçòðåòå, çà äà\n"
-"èíñòàëèðàì íîâèÿ âè Mandrake Linux äÿë. Âíèìàíèå, âñè÷êè äàííè íà íåãî ùå "
-"áúäàò çàãóáåíè\n"
-"è íÿìà äà ìîãàò äà ñå âúçñòàíîâÿò."
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Öúêíåòå \"OK\", àêî èñêàòå äà èçòðèåòå âñè÷êè äàííè è\n"
-"äÿëîâå ñúùåñòâóâàùè íà òîçè òâúðä äèñê. Âíèìàíèå, ñëåä öúêàíå íà \"OK\", "
-"íÿìàäà ìîæåòå äà âúçñòàíîâèòå êàêâèòî è äà áèëî äàííè è äÿëîâå ñúùåñòâóâàùè "
-"íà òîçè òâúðä äèñê,\n"
-"âêëþ÷èòåëíî êàêâèòî è äà å Windows äàííè.\n"
-"\n"
-"Öúêíåòå \"Îòìÿíà\", çà äà îòìåíèòå òàçè îïåðàöèÿ áåç çàãóáà äà äàííèòå è\n"
-"äÿëîâåòå ñúùåñòâóâàùè íà òîçè òâúðä äèñê."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-"Íå ìîãà äà îñúùåñòâÿ äîñòúï äî ìîäóëèòå íà ÿäðîòî ñúîòâåòñâàùè íà ÿäðîòî âè "
-"(ôàéëúò %s ëèïñâà)"
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Èçáðàëè ñòå ñëåäíèÿ(òå) ñúðâúð(è): %s\n"
-"\n"
-"\n"
-"Òåçè ñúðâúðè ñå àêòèâèðàò ïî ïîäðàçáèðàíå. Òå íÿìàò èçâåñòíè ïðîáëåìè ñúñ\n"
-"ñèãóðíîñòòà, íî ìîæå äà ñå íàìåðÿò íîâè.  òîçè ñëó÷àé, ùå òðÿáâà äà ñòå\n"
-"ñèãóðíè, ÷å ùå íàäãðàæäàòå âúçìîæíî íàé-áúðçî.\n"
-"\n"
-"\n"
-"Íàèñòèíà ëè èñêàòå äà èíñòàëèðàòå òåçè ñúðâúðè ?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Íå ìîæåòå äà èçïîëçâàòå broadcast áåç NIS äîìåéí"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ñëîæåòå FAT ôîðìàòèðàíà äèñêåòà â óñòðîéñòâî %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Òàçè äèñêåòà íå å ôîðìàòèðàíà íà FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Çà äà èçïîëçâàòå çàïàçåí èçáîð íà ïàêåòè, ñòàðòèðàéòå èíñòàëàöèÿòà ñ ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Ãðåøêà ïðè ÷åòåíåòî íà ôàéëà %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"×àñò îò õàðäóåðà íà êîìïþòúðà âè ñå íóæäàå îò ``ñîáñòâåíèòå ñè'' äðàéâåðè, "
-"çà äà ðàáîòè.\n"
-"Ìîæåòå äà íàìåðèòå ïîâå÷å èíôîðìàöèÿ çà òîâà íà: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Òðÿáâà äà èìàòå root-äÿë.\n"
-"Çàòîâà ñúçäàéòå äÿë (èëè öúêíåòå íà ñúùåñòâóâàù).\n"
-"Òîãàâà èçáåðåòå äåéñòâèå ``Ìÿñòî íà ìîíòèðàíå'' è ãî ñëîæåòå `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Òðÿáâà äà èìàòå swap-äÿë"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Íÿìàòå swap-äÿë\n"
-"\n"
-"Äà ïðîäúëæà ëè âñå ïàê ?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Òðÿáâà äà èìàòå FAT äÿë ìîíòèðàí â /boot/efi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Èçïîëçâàé ñâîáîäíîòî ìÿñòî"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Íÿìà äîñòàòú÷íî ìÿñòî çà ñúçäàâàíå íà íîâ äÿë"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Èçïîçâàíå íà ñúùåñòâóâàù äÿë"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Íÿìà äÿë, êîéòî ìîãà äà èçïîëçâàì"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Èçïîëçâàé çà Windows äÿëúò çà loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Êîé äÿë èñêàòå äà èçïîëçâàòå çà Linux4Win ?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Èçáåðåòå ãîëåìèíèòå"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Ãîëåìèíà íà root-äÿëà â MB: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Ãîëåìèíà íà swap-äÿëà â MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Èçïîëçâàé ñâîáîäíîòî ìÿñòî íà Windows äÿëà"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Êîé äÿë æåëàåòå äà ïðîìåíèòå?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Èç÷èñëÿâàì ãðàíèöèòå íà Windows ôàéëîâàòà ñèñòåìà"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Íå âúçìîæíîñò çà ðàáîòà ñ âàøèÿ FAT äÿë, \n"
-"ïîðàäè ïîëó÷åíàòà ãðåøêà: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Âàøèÿò Windows äÿë å ìíîãî ôðàãìåíòèðàí, ìîëÿ ïúðâî ñòàðòèðàéòå ''defrag''"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ÂÍÈÌÀÍÈÅ!\n"
-"\n"
-"DrakX òðÿáâà äà ïðåðàçäåëè Âàøèÿ Windows äÿë. Áúäåòå âíèìàòåëíè: òàçè "
-"îïåðàöèÿ å\n"
-"îïàñíà. Àêî îùå íå ñòå ãî íàïðàâèëè, òðÿáâà ïúðâî äà ïóñíåòå scandisk (è\n"
-"åâåíòóàëíî äà èçïîëçâàòå defrag) ïîä Windows âúðõó òîçè äÿë, òîãàâà \n"
-"ïîâòîðåòå èíñòàëàöèàÿòà. Áè áèëî äîáðå äà íàïðàâèòå àðõèâ íà äàííèòå ñè.\n"
-"Êîãàòî ñòå ñèãóðíè, íàòèñíåòå ÎÊ."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Êîëêî èñêàòå äà îñòàâèòå çà windows?"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "äÿë %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Íåóñïåøíî ïðåðàçäåëÿíå íà FAT: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Íÿìà FAT äÿëîâå çà ñìÿíà íà ãîëåìèíàòà èëè çà èçïîëçâàíå êàòî loopback (èëè "
-"íÿìà äîñòàòú÷íî ìÿñòî íà äèñêà)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Èçòðèé öåëèÿ äèñê"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Ïðåìàõíè Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "èìàòå ïîâå÷å îò åäèí òâúðäè äèñêîâå, êîé äà èçïîëçâàì çà èíñòàëàöèÿòà?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "ÂÑÈ×ÊÈ ñúùåñòâóâàùè äÿëîâå è äàííèòe âúðõó òÿõ íà %s ùå áúäàò çàãóáåíè"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Êëèåíòñêî ðàçäåëÿíå íà äèñêà"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Èçïîëçâàé fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Ñåãà ìîæåòå äà ðàçäåëèòå %s.\n"
-"Êîãàòî ñòå ãîòîâè, íå çàáðàâÿéòå äà çàïèøåòå èçïîëçâàéêè `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Íÿìà äîñòàòú÷íî ñâîáîäíî ìÿñòî íà äÿëà"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Íå ìîãà äà íàìåðÿ íèêàêâî ìÿñòî çà èíñòàëàöèÿ"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Ïîìîùíèêúò çà ðàçäåëèíå íà äÿëîâå íà DrakX íàìåðè ñëåäíèòå ðåøåíèÿ:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Íåóñïåøíî ðàçäåëÿíå íà: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Âêëþ÷âàì ìðåæàòà"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Èçêëþ÷âàíå íà ìðåæàòà"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ïîÿâè ñå ãðåøêà, íî íå çíàì êàê äà ñå ñïðàâÿ ñ íåÿ äåëèêàòíî.\n"
-"Ìîæåòå äà ïðîäúëæèòå íà ñâîé ðèñê."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Äóáëèðàé òî÷êàòà íà ìîíòèðàíå %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Íÿêîè âàæíè ïàêåòè íå ñå èíñòàëèðàõà êàêòî òðÿáâà.\n"
-"Èëè CDROM óñòðîéñòâîòî âè èëè êîìïàêò äèñêà âè å äåôåêòåí.\n"
-"Ïðîâåðåòå êîìïàêò äèñêà íà èíñòàëèðàíèÿ êîìïþòúð èçïîëçâàéêè \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Äîáðå äîøëè â %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Íÿìà ôëîïè óñòðîéñòâî"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Íàâëèçàì â åòàï `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Èçáåðåòå ãîëåìèíàòà, êîÿòî èñêàòå äà èíñòàëèðàòå"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Îáùà ãîëåìèíà: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Âåðñèÿ: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Ãîëåìèíà: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Èçáåðåòå ïàêåòèòå, êîèòî èñêàòå äà èíñòàëèðàòå"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Èíôîðìàöèÿ"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Èíñòàëèðàé"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Èíñòàëèðàì"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Ìîëÿ, èç÷àêàéòå, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Îñòàâàùî âðåìå "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Îáùà ïðîäúëæèòåëíîñò "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Ïîäãîòâÿì èíñòàëàöèÿòà"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Èíñòàëèðàíå íà ïàêåòà %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Äà ïðîäúëæà ëè âñå ïàê ?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Ïîÿâè ñå ãðåøêà ïðè ïîðú÷âàíåòî íà ïàêåòèòå:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Äà èçïîëçâàì ëè ñåãàøíàòà íàñòðîéêà íà X11 ?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Âàøàòà ñèñòåìà å ñ ìàëêè ðåñóðñè. Ìîæå äà èìàòå ïðîáëåìè ñ èíñòàëèðàíåòî\n"
-"íà Mandrake Linux. Àêî ñå ïîÿâè ïðîáëåì îïèòàéòå ñ òåêñòîâàòà èíñàëàöèÿ. "
-"Çàöåëòà,\n"
-"íàòèñíåòå 'F1', êîãàòî ñòàðòèðàòå îò CDROM è âúâåäåòå 'òåüò'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Êëàñ èíñòàëàöèÿ"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Ìîëÿ, èçáåðåòå åäèí îò ñëåäíèòå êëàñîâå íà èíñòàëàöèÿ:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Îáùàòà ãîëåìèíà íà ãðóïèòå, êîèòî ñòå ìàðêèðàëè, å îêîëî %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Àêî èñêàòå äà èíñòàëèðàòå ïî-ìàëêî îò òàçè ãîëåìèíà,\n"
-"èçáåðåòå ïðîöåíò ïàêåòè, êîèòî èñêàòå äà èíñòàëèðàòå.\n"
-"\n"
-"Ïðè íèñúê ïðîöåíò ùå ñå èíñòàëèðàò ñàìî íàé-âàæíèòå ïàêåòè;\n"
-"ïðè 100%% ùå èíñòàëèðàò âñè÷êè ìàðêèðàíè ïàêåòè."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Èìàòå ìÿñòî íà äèñêà ñè ñàìî çà %d%% îò òåçè ïàêåòè.\n"
-"\n"
-"Àêî èñêàòå äà èíñòàëèðàòå ïî-ìàëêî îò òîâà,\n"
-"èçáåðåòå ïðîöåíò îò ïàêåòèòå, êîèòî èíñêàòå äà èíñòàëèðàòå.\n"
-"Ïðè íèñúê ïðîöåíò ùå ñå èíñòàëèðàò ñàìî íàé-âàæíèòå ïàêåòè;\n"
-"ïðè %d%% ùå èíñòàëèðàò âñè÷êè èçáðàíè ïàêåòè."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Ùå èìàòå âúçìîæíîñòòà äà èçáåðåòå ïî-òî÷íî ïðè ñëåäâàùèÿ åòàï."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Ïðîöåíò ïàêåòè çà èíñòàëèðàíå"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Èçáîð íà ãðóïà ïàêåòè"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Èçáèðàíå íà ïàêåòè åäèí ïî åäèí"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Îáùà ãîëåìèíà: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Ëîø ïàêåò"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Èìå: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Âàæíîñò: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Íå ìîæåòå äà îñòàâèòå ïàêåòà íåìàðêèðàí, çàùîòî íÿìàòå ìÿñòî äà ãî "
-"èíñòàëèðàòå"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Ñëåäíèòå ïàêåòè ùå áúäàò èíñòàëèðàíè"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Ñëåäíèòå ïàêåòè ùå áúäàò ïðåìàõíàòè"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Íå ìîæåòå äà îòáåëåæåòå/äåîòáåëåæåòå òîçè ïàêåò"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Òîâà å íóæåí ïàêåò, íå ìîæå äà áúäå íåìàðêèðàí"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Íå ìîæåòå äà îñòàâèòå òîçè ïàêåò íåìàðêèðàí. Òîé âå÷å å èíñòàëèðàí"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Òîçè ïàêåò òðÿáâà äà áúäå îáíîâåí\n"
-"Ñèãóðíè ëè ñòå, ÷å èñêàòå äà ãî èçêëþ÷èòå ?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Íå ìîæåòå äà èçêëþ÷èòå òîçè ïàêåò. Òîé òðÿáâà äà áúäå îáíîâåí"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Ïîêàæè àâòîìàòè÷íî îòáåëÿçàíèòå ïàêåòè"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Çàðåäè/Çàïàçè íà äèñêåòà"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "Îáíîâÿâàíå íà èçáîðà íà ïàêåòè"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "Ìèìèíàëíà èíñòàëàöèÿ"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Ïðåñìÿòàíå"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Ìîëÿ, èç÷àêàéòå, ïîäãîòâÿíå íà èíñòàëàöèÿòà"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d ïàêåòà"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Âíèìàíèå\n"
-"\n"
-"Ìîëÿ, ïðî÷åòåòå óñëîâèÿòà ïî-äîëó. Àêî íå ñòå ñúãëàñíè ñ íÿêîå îò òÿõ,\n"
-"íå ìîæåòå äà ïðîäúëæèòå èíñòàëàöèÿòà íà ñëåäâàùèÿ CD íîñèòåë. Íàòèñíåòå\n"
-"'Îòêàæè', çà äà ïðîäúëæèòå èíñòàëàöèÿòà áåç òåçè íîñèòåëè.\n"
-"\n"
-"\n"
-"Íÿêîè êîìïîíåíòè ñúäúðæàùè ñå â ñëåäâàùèÿ CD íîñèòåë íå ñà ðàçïðîñòðàíÿâàò\n"
-"ïîä GPL Ëèöåíçà èëè ïîäîáåí òàêúâ. Âñåêè òàêúâ êîìïîíåíò å ïîä óñëîâèÿòà\n"
-"è ïîëîæåíèÿòà íà ñïåöèôè÷íèÿ ìó ëèöåíç. Ìîëÿ, ïðî÷åòåòå âíèìàòåëíî è èçöÿëî\n"
-"òåçè ñïåöèôè÷íè ëèöåíçè ïðåäè äà èçïîëçâàòå èëè ðàçïðîñòðàíÿâàòå "
-"ñïîìåíàòèòå\n"
-"êîìïîíåíòè.\n"
-"Òàêèâà ëèöåíçè ïî ïðèíöèï ïðåäîòâðàòÿâà ïðåíîñà, êîïèðàíåòî (îñâåí ñ öåë\n"
-"ñúõðàíåíèå), ðàçïðîñòðàíÿâàíåòî, îáðàòíèÿ èíæåíåðèíã, äåàñåìáëèðàíåòî\n"
-"äåêîìïèëàöèÿòà èëè ìîäèôèêàöèÿòà íà êîìïîíåíòèòå.\n"
-"Âñÿêî íàðóøàâàíå íà ñïîãîäáàòà íåçàáàâíî ïðåóñòàíîâÿâà ïðàâàòà âè ïî\n"
-"ñïåöèôè÷íèÿ ëèöåíç. Îñâåí àêî ñïåöèôè÷íèÿ ëèöåíç âè äàâà òàêèâà ïðàâà,\n"
-"îáèêíîâåíî íå ìîæåòå äà èíñòàëèðàòå ïðîãðàìèòå íà ïîâå÷å îò åäíà ñèñòåìà\n"
-"èëè äà ãè ïðèãàæäàòå çà èçïîëçâàíå â ìðåæà. Àêî íå ñòå ñèãóðíè, ìîëÿ\n"
-"ñâúðæåòå ñå ñ äèñòðèáóöèÿ èëè ðåäàêòîðà íà êîìïîíåíà.\n"
-"Ïðåõâúðëÿíåòî íà òðåòè ëèöà èëè êîïèðàíåòî íà âñÿêà êîìïîíåíòà, âêëþ÷èòåëíî\n"
-"íà äîêóìåíòàöèÿòà, îáèêíîâåíî ñà çàáðàíåíè.\n"
-"\n"
-"\n"
-"Âñè÷êè ïðàâà íà êîìïîíåíòèòå îò ñëåäâàùèÿ CD íîñèòåë ïðèíàäëåæàò íà\n"
-"ñúîòâåòíèòå èì àâòîðè è ñà çàùèòåíè êàòî èíòåëåêòóàëíà ñîáñòâåíîñò îò\n"
-"çàêîíèòå çà àâòîðñêè ïðàâà ïðèëîæèìè çà ñîôòóåðíèòå ïðîãðàìè.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Ïðèåìè"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Îòêàæè"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Ñìåíåòå CD-ROM !\n"
-"\n"
-"Ìîëÿ, ñëîæåòå CD-ROM îçàãëàâåí \"%s\" â óñòðîéñòâîòî è íàòèñíåòå Ok, êîãàòî "
-"ñòå ãîòîâè.\n"
-"Àêî ãî íÿìàòå, íàòèñíåòå Îòìÿíà, çà äà èçáåãíåòå èíñòàëèðàíåòî îò òîçè CD-"
-"ROM."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Ïîÿâè ñå ãðåøêà ïðè èíñòàëèðàíå íà ïàêåòèòå:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Ïîÿâè ñå ãðåøêà"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Ëèöåíçèîíåí äîãîâîð"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Âúâåäåòíèå\n"
-"\n"
-"Îïåðàöèîííàòà ñèñòåìà è ðàçëè÷íèòå êîìïîíåíòè äîñòúïíè â Mandrake Linux "
-"äèñòðèáóöèÿòà ïî-äîëó ùå ñå\n"
-"íàðè÷àò \"Ñîôòóåðåí Ïðîäóêòè\". Ñîôòóåðíèòå Ïðîäóêòè âêëþ÷âàò, íî íå ñå "
-"îãðàíè÷àâàò ñàìî äî, íàáîðà\n"
-"ïðîãðàìè, ìåòîäè, ïðàâèëà è äîêóìåíòàöèÿ îòíàñÿùà ñå äî îïåðàöèîííàòà "
-"ñèñòåìà è ðàçëè÷íèòå\n"
-"êîìïîíåíòè íà Mandrake Linux äèñòðèáóöèÿòà.\n"
-"\n"
-"\n"
-"1. Ëèöåíçèîíåí äîãîâîð\n"
-"\n"
-"Ìîëÿ, ïðî÷åòåòå âíèìàòåëíî òîçè äîêóìåíò. Òîçè äîêóìåíò å ëèöåíçèîíåí "
-"äîãîâîð ìåæäó âàñ è\n"
-"MandrakeSoft S.A., êîéòî ñå îòíàñÿ äî Ñîôòóåðíèÿ Ïðîäóêò. ×ðåç "
-"èíñòàëèðàíåòî, êîïèðàíåòî\n"
-"èëè èçïîëçâàíåòî íà Ñîôòóåðíèÿ Ïðîäóêò ïî êàêúâòî è äà å íà÷èí âèå èçðè÷íî "
-"ïðèåìàòå è\n"
-"íàïúëíî ñå ñúãëàñÿâàòå äà ñïàçâàòå ñðîêîâåòå è óñëîâèÿòà íà òîçè Ëèöåíç.\n"
-"Àêî íå ñå ñúãëàñÿâàòå ñ íÿêîÿ ÷àñò íà Ëèöåíçà, íÿìàòå ïðàâî äà èíñòàëèðàòå, "
-"êîïèðàòå èëè\n"
-"èçïîëçâàòå Ñîôòóåðíèÿ Ïðîäóêò. Îïèòèòå äà ñå èíñòàëèðà, êîïèðà èëè èçïîëçâà "
-"Ñîôòóåðíèÿ Ïðîäóêò\n"
-"íåñúîáðàçíî ñúñ ñðîêîâåòå è óñëîâèÿòà íà òîçè Ëèöåíç ñå çàáðàíÿâàò è òàêèâà "
-"ïðåêðàòÿâàò ïðàâàòà\n"
-"âè ïî òîçè Ëèöåíç. Ïðè ïðåêðàòÿâàíå íà Ëèöåíçà, òðÿáâà íåçàáàâíî äà "
-"óíèæòîæèòå âñè÷êè\n"
-"êîïèÿ íà Ñîôòóåðíèÿ ëèöåíç.\n"
-"\n"
-"\n"
-"2. Îãðàíè÷åíà ãàðàíöèÿ\n"
-"\n"
-"Ñîôòóåðíèòå Ïðîäóêòè è ïðèëîæåíàòà äîêóìåíòàöèÿ ñå ïðåäîñòàâÿòà \"òàêèâà "
-"êàêâèòî ñà\", áåç ãàðàíöèÿ,\n"
-"â ðàìêèòå íà ðàçðåøåíîòî îò çàêîíà.\n"
-"MandrakeSoft S.A., ïðè íèêàêâè îáñòîÿòåëñòâà è â ðàìêèòå íà çàêîíà, íå å "
-"îòãîâîðíà çà êàêâèòî äà e\n"
-"óìèøëåíè, ñëó÷àéíè, ïðåêè èëè êîñòâåíè ùåòè (âêëþ÷èòåëíî çàãóáà íà äàííè çà "
-"ðàáîòà, ïðåêðàòÿâàíå íà,\n"
-"ðàáîòà, ôèíàíñîâè çàãóáè, çàêîííè äàíúöè è íàêàçàíèÿ â ðåçóëòàò íà ñúäåáíî "
-"ðåøåíèå èëè êàêâàòî è äà å\n"
-"äðóãà ïðîèçëèçàùè îò òîâà çàãóáè) ïðîèçòè÷àùè îò óïîòðåáàòà èëè îò "
-"íåâúçìîæíîñòòà äà ñå óïîòðåáè\n"
-"Ñîôòóåðíèÿ Ïðîäóêò, äàæå àêî MandrakeSoft S.A. äà å èçâåñòèëà çà "
-"âúçìîæíîñòòà èëè ñëó÷âàíåòî íà òàêàâà çàãóáà.\n"
-"\n"
-"ÎÃÐÀÍÈ×ÅÍÀ ÎÒÃÎÂÎÐÍÎÑÒ ÑÂÚÐÇÀÍÀ Ñ ÏÐÈÒÅÆÀÂÀÍÅÒÎ ÈËÈ ÈÇÏÎËÇÂÀÍÅÒÎ ÍÀ ÇÀÁÐÀÍÅÍ "
-"ÑÎÔÒÓÅÐ Â ÍßÊÎÈ ÑÒÐÀÍÈ\n"
-"\n"
-"Â ðàìêèòå íà çàêîíà, MandrakeSoft S.A. è íåéíèòå äèñòðèáóòîðè íÿìà ïðè "
-"íèêàêâè óñëîâèÿ äà áúäàò\n"
-"îòãîâîðíè çà êàêâèòî è äà áèëî óìèøëåíè, ñëó÷àéíè, ïðåêè èëè êîñâåíè ùåòè "
-"(âêëþ÷èòåëíî çàãóáà íà äàííè\n"
-"çà ðàáîòà, ïðåêðàòÿâàíå íà, ðàáîòà, ôèíàíñîâè çàãóáè, çàêîííè äàíúöè è "
-"íàêàçàíèÿ â ðåçóëòàò íà\n"
-"ñúäåáíî ðåøåíèå èëè êàêâàòî è äà å äðóãà ïðîèçëèçàùè îò òîâà çàãóáè) "
-"ïðîèçòè÷àùè îò ïðèòåæàâàíåòî\n"
-"è óïîòðåáàòà íà ñîôòóåðíè êîìïîíåíòè è îò èçòåãëÿíåòî íà ñîôòóåðíè "
-"êîìïîíåíòè îò ñàéòîâåòå íà Mandrake Linux,\n"
-"êîèòî ñà çàáðàíåíè â íÿêîè ñòðàíè îò ìåñòíîòî çàêîíîäàòåëñòâî.\n"
-"Òàçè îãðàíè÷åíà îòãîâîðíîñò ñå îòíàñÿ äî, íî íå ñàìî çà, ìîùíèòå "
-"êðèïòîãðàôñêè êîìïîíåíòè âêëþ÷åíè\n"
-"â Ñîôòóåðíèÿ Ïðîäóêò.\n"
-"\n"
-"\n"
-"3. GPL Ëèöåíçà è ïðèäðóæàâàùè ëèöåíçè\n"
-"\n"
-"Ñîôòóåðíèÿò Ïðîäóêò ñå ñúñòîè îò êîìïîíåíòè ñúçäàäåíè îò ðàçëè÷íè õîðà èëè "
-"îðãàíèçàöèè. Ïîâå÷åòî îò\n"
-"òåçè êîìïîíåíòè ñå óïðàâëÿâàò îò ñðîêîâåòå è óñëîâèÿòà íà GNU Îáùèÿ Ïóáëè÷åí "
-"Ëèöåíç, îòòóê íàòàòúê íàðè÷àí\n"
-"\"GPL\", èëè ïîäîáíè íåìó ëèöåíçè. Ïîâå÷åòî îò òåçè ëèöåíçè âè ïîçâîëÿâàò äà "
-"èçïîëçâàòå, êîïèðàòå, èëè\n"
-"ðåäèñòðèáóòèðàòå êîìïîíåíòèòå, êîèòî òå ïîêðèâàò. Ìîëÿ, ïðî÷åòåòå âíèìàòåëíî "
-"ñðîêîâåòå è óñëîâèÿòà íà\n"
-"ëèöåíçèîííèÿ äîãîâîð íà âñåêè êîìïîíåíò ïðåäè äà ãî èçïîëçâàòå. Âñÿêàêâè "
-"âúïðîñè îòíîñíî ëèöåíçà\n"
-"íà êîìïîíåíòèòå áè òðÿáâàëî äà áúäàò íàñî÷åíè êúì ñúîòâåòíèÿ èì àâòîð, à íå "
-"êúì MandrakeSoft.\n"
-"Ïðîãðàìèòå ðàçðàáîòåíè îò MandrakeSoft S.A. ñå óïðàâëÿâàò îò GPL Ëèöåíçà. "
-"Äîêóìåíòàöèÿòà íàïèñàíà\n"
-"îò MandrakeSoft S.A. ñå óïðàâëÿâà îò ñïåöèàëåí ëèöåíç. Ìîëÿ, ïîãëåäíåòå "
-"äîêóìåíòàöèÿòà çà\n"
-"ïîâå÷å èíôîðìàöèÿ.\n"
-"\n"
-"\n"
-"4. Ïðàâà çà Èíòåëåêòóàëíà Ñîáñòâåíîñò\n"
-"\n"
-"Âñè÷êè ïðàâà êúì êîìïîíåíòèòå íà Ñîôòóåðíèÿ Ïðîäóêò ïðèíàäëåæàò íà "
-"ñúîòâåòíèòå èì àâòîðè è ñà\n"
-"çàùèòåíè îò çàêîíèòå çà èíòåëåêòóàëíàòà ñîáñòâåíîñò è çà êîïèðàíå ïðèëàãàíè "
-"çà ñîôòóåðíèòå ïðîãðàìè.\n"
-"MandrakeSoft S.A. çàïàçâà ïðàâîòî ñè äà ìîäèôèöèðà è ïðèãîäÿâà Ñîôòóåðíèÿ "
-"Ïðîäóêò, êàòî öÿëî èëè íà\n"
-"÷àñòè, ïî âñÿêàêúâ íà÷èì î ñ âñÿêàêâè öåëè.\n"
-"\"Mandrake\", \"Mandrake Linux\" è ñâúðçàíèòå ëîãîòà ñà çàïàçåíà ìàðêà íà "
-"MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. Óïðàâëÿâàùè Çàêîíè\n"
-"\n"
-"Àêî íÿêîÿ ÷àñò îò òîçè äîãîâîð ñå âîäè çàáðàíåíà, íåëåãàëíà èëè íåïðèëîæèìà "
-"ñïîðåä ðåøåíèå íà ñúä,\n"
-"òàçè ÷àñò ñå èçêëþ÷âà îò äîãîâîðà. Âèå îñòàâàòå îãðàíè÷åíè îò îñòàíàëèòå "
-"ïðèëîæèìè ñåêöèè íà äîãîâîðà.\n"
-"Ñðîêîâåòå è óñëîâèÿòà íà òîçè Ëèöåíç ñå óïðàâëÿâàò îò Çàêîíèòå íà Ôðàíöèÿ.\n"
-"Âñè÷êè ñïîðîâå ïî óñëîâèÿòà íà òîçè ëèöåç áè áèëî äîáðå äà ñå îòíåñàò äî "
-"ñúäà. Êàòî êðàéíà ìÿðêà,\n"
-"ñïîðîâåòå ùå áúäàò îòíàñÿíè äî ïîäõîäÿùèÿ ïðàâíè ñúäèëèùà íà Ïàðèæ - "
-"Ôðàíöèÿ.\n"
-"Çà âñÿêàêâè âúïðîñè ïî òîçè äîêóìåíò, ìîëÿ, ñâúðæåòå ñå ñ MandrakeSoft S.A.\n"
-"\n"
-"ÇÀÁÅËÅÆÊÀ: Òîâà å áúëãàðñêè ïðèáëèçèòåëåí ïðåâîä íà äîêóìåíòà, êîåòî "
-"îçíà÷àâà, ÷å òîé\n"
-"âåðîÿòíî íå å äîñòàòú÷íî òî÷åí. Êàòî ïî-äîñòîâåðåí èçòî÷íèê ïîëçâàéòå "
-"íåãîâèÿ îðèãèíàë íà\n"
-"àíãëèéñêè.\n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Êëàâèàòóðà"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Ìîëÿ, èçáåðåòå ïîäðåæäàíå íà êëàâèàòóðàòà."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Åòî ïúëåí ñïèñúê íà äîñòðúïíèòå êëàâèàòóðè"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Êàêúâ êëàñ èíñòàëàöèÿ æåëàåòå ?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Èíñòàëèðàé/Îáíîâè"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Òîâà íîâà èíñòàëàöèÿ ëè å èëè îáíîâÿâàíå ?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Ïðåïîðú÷èòåëíà"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Åêñïåðòíà"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Îáíîâÿâàíå"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Ìîëÿ, èçáåðåòå òèï íà ìèøêàòà."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Ïîðò íà ìèøêàòà"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Ìîëÿ, èçáåðåòå êúì êîé ñåðèåí ïîðò å ñâúðçàíà ìèøêàòà âè."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Èìèòàöèÿ íà áóòîíè"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Èìèòàöèÿ íà 2 áóòîíà"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Èìèòàöèÿ íà 3 áóòîíà"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Íàñòðîéêà íà PCMCIA êàðòèòå ..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Íàñòðîéêà íà IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "íÿìà äÿëîâå íà ðàçïîëîæåíèå"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Ïðåòúðñâàíå íà äÿëîâåòå çà íàìèðàíå íà òî÷êè íà ìîíòèðàíå"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Èçáåðåòå ìåñòà çà ìîíòèðàíå"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Íå ìîãà äà ðàç÷åòà òàáëèöàòà íà äÿëîâåòå, ïðåêàëåíî å ïîâðåäåíà çà ìåí :(\n"
-"Ìîãà äà ñå îïèòàì äà èç÷èñòÿ ëîøèòå äÿëîâå (ÂÑÈ×ÊÈ ÄÀÍÍÈ ùå áúäàò "
-"çàãóáåíè!).\n"
-"Äðóãî ðåøåíèå å äà çàáðàíèòå íà DrakX ïîïðàâÿ òàáëèöàòà ñ äÿëîâå.\n"
-"(ãðåøêàòà å %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake íå óñïÿ äà ðàç÷åòå ïðàâèëíî òàáëèöàòà íà äÿëîâåòå.\n"
-"Ïðîäúëæèòå íà ñîáñòâåí ðèñê !"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Íÿìà ñâîáîäíî ìÿñòî çà 1 ÌÁ ñòàðòèðàùî ïîëå ! Èíñòàëàöèÿòà ùå ïðîäúëæè, íî, "
-"çà äà ñòàðòèðàòå ñèñòåìàòà ñè, ùå òðÿáâà äà ñúçäàäåòå ñòàðòèðàùî ïîëå â "
-"DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "Íå å íàìåðåí ãëàâåí äÿë çà íàäãðàæäàíå"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Root äÿë"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Êîé å root-äÿëúò (/) íà ñèñòåìàòà âè ?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Íàëàãà ñå ðà ðåñòàðòèðàòå, ïðåäè ìîäèôèêàöèèòå äà ïðåäèçâèêàò åôåêò"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Èçáåðåòå äÿëîâåòå, êîèòî èñêàòå äà ôîðìàòèðàòå"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Ïðîâåðêà çà ëîøè ñåêòîðè ?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Ôîðìàòèðàíå íà äÿëowe"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Ñúçäàâàíå è ôîðìàòèðàíå íà ôàéëà %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Íÿìà äîñòàòú÷íî swap çà ïðèêëþ÷âàíå íà èíñòàëàöèÿòà, ìîëÿ äîáàâåòå ìàëêî"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Òúðñÿ íàëè÷íè ïàêåòè"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Òúðñÿ ïàêåòè çà îáíîâÿâàíå"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Ñèñòåìàòà âè íÿìà äîñòàòú÷íî ìÿñòî çà èíñòàëàöèÿ èëè îáíîâÿâàíå (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Ïúëíà (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Ìèíèìàëíà (%d Mb)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Ïðåïîðú÷èòåëíà (%dMb)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Êëèåíòñêà"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Ìîæå èçáåðåòå çàðåæäàíå èëè çàïèñ íà èçáîðà íà ïàêåòè íà ôëîïè.\n"
-"Ôîðìàòúò å ñúùèÿò êàòî auto_install ãåíåðèðàíèòå äèñêåòè."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Çàðåäè îò äèñêåòà"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Çàðåæäàíå îò äèñêåòà"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Èçáîð íà ïàêåòè"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "Ñëîæåòå äèñêåòà ñúäúðæàùà èçáîð íà ïàêåòè"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Çàïàçè íà äèñêåòà"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Èçáðàíàòà ãîëåìèíà å ïî-ãîëÿìà îò äîñòúïíîòî ïðîñòðàíñòâî"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Àêî èìàòå âñè÷êè CD-òà îò ñïèñúêà ïî-ãîðå, íàòèñíåòå Ok.\n"
-"Àêî íÿìàòå íèòî åäíî îò òåçè CD-òà, íàòèñíåòå Îòìÿíà.\n"
-"Àêî âè ëèïñâàò íÿêîè CD-òà, ìàõíåòå ãè, è íàòèñíåòå Ok. "
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM îçàãëàâåí \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Èíñòàëèðàì ïàêåò %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Ñëåä èíñòàëàöèîííà íàñòðîéêà"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Ñëîæåòå ñòàðòèðàùàòà äèñêåòà â óñòðîéñòâî %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Ñëîæåòå äèñêåòà çà îáíîâÿâàíå íà ìîäóëè â óñòðîéñòâî %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Ñåãà èìàòå âúçìîæíîñòòà äà ñâàëèòå ñîôòóåð ñ öåë êîäèðàíå.\n"
-"\n"
-"ÂÍÈÌÀÍÈÅ:\n"
-"\n"
-"Ïîðàäè ðàçëè÷íèòå èçèñêâàíèÿ ïîñòàâåíè îò òîçè ñîôòóåð è îò ìíîãî\n"
-"þðèñäèêöèè, êëèåíòèòå è/èëè êðàéíèòå êëèåíòè íà òîçè ñîôòóåð òðÿáâà\n"
-"äà áúäàò ñèãóðíè, ÷å íîðìàòèâíàòà áàçà èì ïîçâîëÿâà ñâàëÿíåòî, ïðîäàæáàòà\n"
-"è/èëè èçïîëçâàíåòî íà òîçè ñîôòóåð.\n"
-"\n"
-"Â äîïúëíåíèå êëèåíòúò è/èëè êðàéíèÿ ïîòðåáèòåë òðÿáâà äà âíèìàâà ñ òîâà\n"
-"äàíåáè äà íàðóøè ÷àñò îò íîðìàòèâíàòà áàçà. Êëèåíòúò è/èëè êðàéíèÿò\n"
-"ïîòðåáèòåë òðÿáâà äà óâàæàâà ïðèëåæàùèòå çàêîíè, òúé êàòî òîé ùå ïîíåñå\n"
-"ñàíêöèèòå.\n"
-" íèêàêúâ ñëó÷àé Mandrakesoft èëè íåãîâèòå ïðîèçâîäèòåëè è/èëè\n"
-"ñïîìîùåñòâóâàòåëèòå ìó íå íîñÿò íèêàêâà îòãîâîðíîñò çà êàêâèòî è äà å\n"
-"ïðåêè, êîñâåíè èëè ñëó÷àéíè âðåäè (âêëþ÷èòåëíî, íî íå ñàìî îãðàíè÷åíè â\n"
-"çàãóáàòà íà ïîëçè, ïðåêúñâàíå íà áèçíåñ, çàãóáà íà êîìåðñèàëíè äàííè è\n"
-"äðóãè ïàðè÷íè çàãóáè, è åâåíòóàëíè îòãîâîðíîñòè è îáåùåòåíèÿ çà ïëàùàíå\n"
-"ïî ñúäåáíè ðåøåíèÿ) ïðåäèçâèêàíè îò èçïîëçâàíåòî, ïîñòàâÿíåòî èëè äîðè\n"
-"ñâàëÿíåòî íà òîçè ñîôòóåð, äî êîéòî êëèåíòúò è/èëè êðàéíèÿò ïîòðåáèòåë\n"
-"åâåíòóàëíî ìîæå äà èìà äîñòúï ñëåä ñúãëàñèåòî ñ òîâà ñïîðàçóìåíèå.\n"
-"\n"
-"Çà âñÿêàêâè âúïðîñè ïî òîâà ñïîðàçóìåíèå, ìîëÿ, ñâúðæåòå ñå ñ \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Èçáåðåòå îãëåäàëåí ñúðâúð,îò êîéòî äà ïîëó÷èòå ïàêåòèòå"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Ñâúðçâàíå ñ îãëåäàëíèÿ ñúðâúð çà ïîëó÷àâàíå íà ñïèñúêà ñ ïàêåòèòå"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Ìîëÿ, èçáåðåòå ïàêåòèòå, êîèòî èñêàòå äà èíñòàëèðàòå."
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Êîÿ å âðåìåâàòà âè çîíà ?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "Õàäðóåðíèÿò âè ÷àñîâíèê å íàñòðîåí ïî GMT"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Àâòîìàòè÷íà ñèíõðîíèçàöèÿ íà âðåìåòî (èçïîëçâà NTP)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "NTP ñúðâúð"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Îòäàëå÷åí CUPS ñúðâúð"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Íÿìà ïðèíòåð"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Îáîáùåíèå"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Ìèøêà"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "×àñîâà çîíà"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Ïðèíòåð"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDN êàðòà"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Çâóêîâà êàðòà"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV êàðòà"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Ëîêàëíè ôàéëîâå"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Âúâåäåòå ïàðîëà çà root"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Áåç ïàðîëà"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Ïàðîëàòà å ïðåêàëåíî ïðîñòà (òðÿáâà äà áúäå äúëãà ïîíå %d ñèìâîëà)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Èäåíòèôèêàöèÿ"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "LDAP àóòîðèçàöèÿ"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP Áàçîâ dn"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "LDAP ñúðâúð"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "NIS àóòîðèçàöèÿ"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS äîìåéí"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS ñúðâúð"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Êëèåíòñêÿò bootdisk å íåîáõîäèì çà ñòàðòèðàíå â Linux ñèñòåìàòà âè "
-"íåçàâèñèìî\n"
-"îò îáèêíîâåíèÿ bootloader. Òîâà å ïîëåçíî, àêî íå èñêàòå äà èíñòàëèðàòå\n"
-"SILO íà ñèñòåìàòà ñè, àêî íÿêîÿ äðóãà îïåðàöèîííà ñèñòåìà ìàõíå SILO\n"
-"èëè àêî SILO íå ðàáîòè ñ õàðäóåðíàòà âè íàñòðîéêà. Êëèåíòñêèÿò bootdisk\n"
-"ìîæå äà áúäå èçïîëçâàí ñúñ\n"
-"ñïàñèòåëíèÿò îáðàç íà Mandrake, óëåñíÿâàêè âúçñòàíîâÿâàíåòî ïðè ðåäêè\n"
-"ñëó÷àè íà ñðèâ.\n"
-"\n"
-"Àêî èñêàòå äà ñúçäàäåòå bootdisk çà âàøàòà ñèñòåìà, ïîñòàâåòå äèñêåòà â\n"
-"ïúðâîòî óñòðîéñòâî è íàòèñíåòå \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Ïúðâî ôëîïè óñòðîéñòâî"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Âòîðî ôëîïè óñòðîéñòâî"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Ïðåñêî÷è"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Êëèåíòñêè bootdisk å íåîáõîäèì çà ñòàðòèðàíå â Linux ñèñòåìàòà âè "
-"íåçàâèñèìî\n"
-"îò îáèêíîâåíàòà çàðåæäàùà ïðîãðàìà. Òîâà å ïîëåçíî, àêî íå èñêàòå äà "
-"èíñòàëèðàòå\n"
-"LILO (èëè GRUB) íà ñèñòåìàòà ñè èëè àêî íÿêîÿ äðóãà îïåðàöèîííà ñèñòåìà "
-"ìàõíå LILO èëè LILO íå\n"
-"ðàáîòè ñ õàðäóåðíàòà âè íàñòðîéêà. Bootdisk-úò ìîæå äà áúäå èçïîëçâàí ñúñ\n"
-"ñïàñèòåëíàòà äèñêåòà íà Mandrake, óëåñíÿâàùà âúçñòàíîâÿâàíåòî ïðè ðåäêè\n"
-"ñëó÷àè íà ñðèâ. Èñêàòå ëè äà ñúçäàì bootdisk çà ñèñòåìàòà âè ?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Ñúæàëÿâàì íÿìà ôëîïè"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Èçáåðåòå ôëîïè äðàéâ,êúäåòî äà íàïðàâèòå ñòàðòèðàùà äèñêåòà"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Ñëîæåòå äèñêåòà â óñòðîéñòâî %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Ñúçäàâàíå íà ñòàðòèðàùà äèñêåòà"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Ïîäãîòîâêà íà bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Èçãëåæäà èìàòå ñòàðîâðåìñêà èëè íåèçâåñòíà\n"
-"ìàøèíà, íà êîÿòî yaboot íÿìà äà ïðîðàáîòè.\n"
-"Èíñòàëàöèÿòà ùå ïðîäúëæè, íî ùå òðÿáâà\n"
-"äà èïîëçâàòå BootX, çà äà ñòàðòèðàòå ìàøèíàòà ñè"
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Èñêàòå ëè äà èçïîëçâàòå aboot ?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Ãðåøêà ïðè èíñòàëèðàíå íà aboot, \n"
-"äà ñå îïèòàì ëè äà ïðîäúëæà èíñòàëàöèÿòà äîðè, àêî òîâà óíèæòîæè ïúðâèÿ äÿë ?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-msgid "Installing bootloader"
-msgstr "Èíñòàëèðàíå íà bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Èíñòàëàöèÿòà íà bootloader ïðîâàëåíà. Ïîÿâè ñå ñëåäíàòà ãðåøêà:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Ìîæå áè ñå íóæäàåòå äà ïðîìåíèòå Open Firmware ñòàðòîâîòî óñòðîéñòâî,\n"
-" çà äà ïóñíåòå çàðåæäàùàòà ïðîãðàìà. Àêî íå âèæäàòå ïîäñêàçêàòà è ïðè\n"
-" ðåñòàðòèðàíå, çàäðúæòå Command-Option-O-F ïðè ðåñòàðòèðàíå è âúâåäåòå:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Ñëåä êîåòî íàïèøåòå: shut-down\n"
-"Ïðè ñëåäâàùîòî ðåñòàðòèðàíå áè òðÿáâàëî äà âèäåòå ïîäñêàçêàòà."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Ñëàáî"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Ñðåäåíî"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Âèñîêî"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Èçáåðåòå íèâî íà ñèãóðíîñò"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ñëîæåòå ïðàçíà äèñêåòà â óñòðîéñòâî %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Ïîäãîòâÿì äèñêåòà ñ àâòîìàòè÷íà èíñòàëàöèÿ"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Íÿêîè åòàïè íå ñà çàâúðøåíè.\n"
-"\n"
-"Íàèñòèíà ëè èñêàòå äà èçëåçåòå ñåãà ?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Ïîçäðàâëåíèÿ, èíñòàëàöèÿòà å ïðåêëþ÷åíà.\n"
-"Ïðåìàõíåòå ñòàðòîâîòî óñòðîéñòâî è íàòèñåíå Enter çà äà ðåñòàðòèðàéòå.\n"
-"\n"
-"Çà èíôîðìàöèÿ îòíîñíî ïîïðàâêè, íà òàçè âåðñèÿ íà Mandrake Linux,\n"
-"ñå êîíñóëòèðàéòå ñ Errata, íà àäðåñ : http://www.mandrakelinux.com/.\n"
-"\n"
-"Èíôîðìàöèÿ çà íàñòðîéâàíå íà ñèñòåìàòà âè ìîæåòå äà íàìåðèòå â\n"
-"ñëåäèíñòàëàöèîííàòà ãëàâà îò Official Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Ïîäãîòâè äèñêåòà çà àâòîìàòè÷íà èíñòàëàöèÿ"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Àâòîìàòè÷íàòà èíñòàëàöèÿ ìîæå äà áúäå íàïúëíî àâòîìàòèçèðàíà,\n"
-"â òàêúâ ñëó÷àé ùå ïðåâçåìå òâúðäèÿ âè äèñê !!!\n"
-"(òîâà å çà ïðåäíàçíà÷åíî çà èíñòàëèðàíå íà äðóãà ìàøèíà).\n"
-"\n"
-"Ìîæå áè èñêàòå äà ïîâòîðèòå èíñòàëàöèÿòà.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Àâòîìàòèçèðàí"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Ïîâòîðè"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Çàïàçè èçáîð íà ïàêåòè"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Èíñòàëàöèÿ íà Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> ìåæäó åëåìåíòèòå  | <Space> èçáèðà  | <F12> ñëåäâàù åêðàí"
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "ëèïñâà kdesu"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "Èçáåðåòå ôàéë"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Íàïðåäíè÷àâ"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Ìîëÿ èç÷àêàéòå"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Ðàçøèðè äúðâîòî"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Èç÷èñòè äúðâîòî"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Ïðåâêëþ÷âàíå ìåæäó íîðìàëíî è ñîðòèðàíå ïî ãðóïè"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "..... (%s), áúäåòå ïî-òî÷åí\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Ëîø èçáîð, îïèòàéòå îòíîâî\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (ïî ïîäðàçáèðàíå å %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Âàøèÿò èçáîð ? (ïî ïîäðàçáèðàíå å %s)"
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Âàøèÿò èçáîð ? (ïî ïîäðàçáèðàíå %s, âúâåäåòå 'none' çà íèêîé)"
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "×åøêà (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Íåìñêà"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Äâîðàê"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Èñïàíñêà"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Ôèíëàíäñêà"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Ôðåíñêà"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Íîðâåæêà"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Ïîëñêà"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Ðóñêà"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Øâåäñêà"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "UÊ êëàâèàòóðà"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "US êëàâèàòóðà"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Àëáàíñêà"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Àðìåíñêà (ñòàðà)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Àðìåíñêà (ïèøåùà ìàøèíà)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Àðìåíñêà (ôîíåòè÷åí)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Àçåðáàéäæàíñêà (ëàòèíèöà)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Áåëãèéñêà"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Áúëãàðñêà"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Áðàçèëñêà (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Áåëàðóñêà"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Øâåéöàðñêà (íåìñêà íàðåäáà)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Øâåéöàðñêà (ôðåíñêè íàðåäáà)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "×åøêà (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Íåìñêà (áåç íåðàáîòåùè êëàâèøè)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Äàòñêà"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Äâîðàê (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Äâîðàê (Íîðâåæêà)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Åñòîíñêà"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Ãðóçèíñêà (\"Ðóñêà\" íàðåäáà)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Ãðóçèíñêà (\"Ëàòèíñêà\" íàðåäáà)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Ãðúöêà"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Óíãàðñêà"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Õúðâàòñêà"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Èçðàåëñêà"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Èçðàåëñêà (ôîíåòè÷íà)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Èðàíñêà"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Èñëàíäñêà"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Èòàëèàíñêà"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "ßïîíñêà 106 êëàâèøà"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Êîðåéñêà êëàâèàòóðà"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Ëàòèíîàìåðèêàíñêà"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Ëèòâèéñêà AZERTY (ñòàðà)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Ëèòâèéñêà AZERTY (íîâà)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Ëèòâèéñêà \"÷èñëîâà ðåäèöà\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Ëèòâèéñêà \"ôîíåòè÷åí\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-msgid "Latvian"
-msgstr "Ëàòâèéñêà"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Ìàêåäîíñêà"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Õîëàíäñêà"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Ïîëñêà (QWERTY íàðåäáà)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Ïîëñêà (QWERTZ íàðåäáà)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Ïîðòóãàëñêà"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Êàíàäñêà (Êâåáåê)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Ðóìúíñêà (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Ðóìúíñêà (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Ðóñêà (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Ñëîâåíñêà"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Ñëîâàøêà (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Ñëîâàøêà (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "Ñðúáñêà (êèðèëèöà)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Òàéâàíñêà êëàâèàòóðà"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr "Òàäæèêèñòàíñêà êëàâèàòóðà"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Òóðñêà (òðàäèöèîíåí \"F\" ìîäåë)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Òóðñêà (ìîäåðåí \"Q\" ìîäåë)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Óêðàèíñêà"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "US êëàâèàòóðà (ìåæäóíàðîäíà)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Âèåòíàìñêà \"÷èñëîâà ðåäèöà\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "Þãîñëàâñêà (ëàòèíèöà)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "\"Îìàãüîñàí êðúã\" îò ìîíòèðàíèÿ: %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Ïúðâî ïðåìàõíè ëîãè÷íèòå äÿëîâî\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Ìèøêà íà Sun"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Ñòàíäàðòíà"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Îáèêíîâåííà PS2 ìèøêà"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington THinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genuis NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 áóòîí"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Îáù"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Wheel"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "ñåðèéíà"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Îáèêíîâåííà 2-áóòîííà ìèøêà"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Îáèêíîâåííà 3-áóòîííà ìèøêà"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (ñåðèéíà, îò ñòàðèÿ òèï C7)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "BUS ìèøêà"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 áóòîíà"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 áóòîíà"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "íÿìà"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Áåç ìèøêà"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Ìîëÿ, ïðîáâàéòå ìèøêàòà ñè"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Çà äà àêòèâèðàòå ìèøêàòà ñè,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "ÁÓÒÍÅÒÅ ÒÎÏ×ÅÒÎ !"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Çàâúðøè"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Ñëåäâàù ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Ïðåäèøåí"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Âñè÷êî ïðàâèëíî ëè å ?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Ñâúðæè ñå êúì Èíòåðíåò"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Íàé-÷åñòèÿ íà÷èí çà ñâúðçâàíå ÷ðåç ADSL å PPPOE.\n"
-"Íÿêîè âðúçêè èçïîëçâàò PPTP, à maëêî èçïîëçâàò DHCP.\n"
-"Àêî íå çíàåòå, èçáåðåòå 'èçïîëçâàé PPPOE'."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "èçïîëçâàé DHCP"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "èçïîëçâàé PPPOE"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "èçïîëçâàé PPPTP"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Êàêúâ DHCP êëèåíò èñêàòå äà èçïîëçâàòå ?\n"
-"Ïî ïîäðàçáèðàíå å dhcpcd ?"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Íå áåøå íàìåðåí ìðåæîâ àäàïòåð â ñèñòåìàòà âè.\n"
-"Íå ìîæåòå äà íàñòðîèòå òàêúâ âèä âðúçêà."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Èçáåðåòå ìðåæîâ èíòåðôåéñ"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Ìîëÿ, èçáåðåòå êîé ìðåæîâ àäàïòåð äà èçïîëçâàì çà âðúçêà êúì Èíòåðíåò"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "íå å îòêðèòà ìðåæîâà êàðòà"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Íàñòîéêà íà ìðåæàòà"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Ìîëÿ, âúâåäåòå èìå íà õîñò àêî ãî çíàåòå.\n"
-"Íÿêîé DHCP ñúðâúðè èçèñêâàò òîâà çà äà ðàáîòÿò.\n"
-"Host èìåòî òðÿáâà äà áóäå íàïúëíî êâàëèôèöèðàíî èìå,\n"
-"êàòî ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Èìå íà õîñò:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Ìàãüîñíèê çà íàñòðîéêà íà ìðåæàòà"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Âúíøåí ISDN ìîäåì"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Âúòðåøíà ISDN êàðòà"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Êàêúâ å òèïúò íà ISDN âðúçêàòà ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Êîÿ ISDN íàñòðîéêà ïðåäïî÷èòàòå ?\n"
-"\n"
-"* Ñòàðàòà íàñòðîéêà èçïîëçâà isdn4net. Ñúäúðæà ìîùíè èíñòðóìåíòè\n"
-"  íî å êàïðèçíà çà íàñòðîéêà è íå å ñòàíäàðòíà.\n"
-"\n"
-"* Íîâàòà íàñòðîéêà å ïî-ëåñíà çà ðàçáèðàíå, ïî ñòàíäàðòíà,\n"
-"  íî ñ ïî-ìàëêî èíñòðóìåíòè.\n"
-"\n"
-"Ïðåïîðú÷âàìå âè îëåêîòåíàòà íàñòðîéêà.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Íîâà íàñòðîéêà (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Ñòàðà íàñòðîéêà (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "Íàñòðîéêà íà IDSN"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Ïîñî÷åòå äîñòàâ÷èêà ñè.\n"
-" Àêî íå å â ñïèñúêà, èçáåðåòå Unlisted"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "Ïðîòîêîë Åâðîïà"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "Ïðîòîêîë Åâðîïà (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "Ïðîòîêîë çà îñòàíàëèÿ ñâÿò"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Ïðîòîêîë çà îñòàíàëèÿ ñâÿò\n"
-" áåç D-Êàíàë (íàåòà ëèíèÿ)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Êàêúâ ïðîòîêîë æåëàåòå äà ïðîìåíèòå ?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Êàêúâ òèï êàðòà èìàòå ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Íå çíàì"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Àêî èìàòå ISA êàðòà, ñòîéíîñòèòå íà ñëåäâàùèÿ åêðàí òðÿáâà äà ñà âåðíè.\n"
-"\n"
-"Àêî èìàòå PCMCIA êàðòà, ùå òðÿáâà äà çíàåòå IRC è IO íà êàðòàòà ñè.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Îòêàç"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Íàòàòúê"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Êîÿ å ISDN êàðòàòà âè ?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Îòêðèòà å ISDN PCI êàðòà, íî ñ íåïîçíàò òèï. Ìîëÿ èçáåðåòå íÿêîÿ PCI êàðòà "
-"îò ñëåäâàùèÿò åêðàí."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Íå å íàìåðåíà ISDN PCI êàðòà. Ìîëÿ èçáåðåòå îò ñëåäâàùèÿò åêðàí."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Ìîëÿ, èçáåðåòå ñåðèåí ïîðò êúì êîéòî ñâúðçàí ìîäåìúò âè."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Îïöèè çà èçáèðàíå ïî òåëåôîí"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Èìå íà âðúçêàòà"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Òåëåôîíåí íîìåð"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Ïîòðåáèòåëñêî èìå"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Áàçèðàíà íà ñêðèïò"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Áàçèðàíà íà òåðìèíàë"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Èìå íà äîìåéíà"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Ïúðâè DNS ñúðâúð (ïî èçáîð)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Âòîðè DNS ñúðâúð (ïî èçáîð)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Ìîæåòå äà ñå îòâúðæåòå èëè äà ïðåíàñòðîèòå âðúçêàòà."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Ìîæåòå äà ïðåíàñòðîèòå âðúçêàòà."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Â ìîìåíòà ñòå ñâúðçàíè êúì Èíòåðíåò"
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Ìîæåòå äà ñå ñâúðæåòå êúì Èíòåðíåò èëè äà ïðåíàñòðîèòå âðúçêàòà."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Â ìîìåíòà íå ñòå ñâúðçàíè êúì Èíòåðíåò"
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Ñâúðæè ñå êúì Èíòåðíåò"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Îòâúðæè ñå îò Èíòåðíåò"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Íàñòðîéêà íà ìðåæîâàòà âðúçêà (LAN èëè Èíòåðíåò)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Èíòåðíåò âðúçêà è íàñòðîéêà"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ñåãà ùå íàñòðîèì %s âðúçêàòà."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Ñåãà ùå íàñòðîèì %s âðúçêàòà.\n"
-"\n"
-"Íàòèñíåòå OK, çà äà ïðîäúëæèòå."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Íàñòðîéêà íà ìðåæàòà"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Òúé êàòî ïðàâèòå ìðåæîâà èíñòàëàöèÿ, ìðåæàòà âè âå÷å å íàñòðîåíà.\n"
-"Öúêíåòå Ok, çà äà çàïàçèòå íàñòðîéêàòà, èëè Îòìÿíà, çà äà ïðåíàñòîèòå "
-"Èíòåðíåò è ìðåæîâàòà ñè âðúçêà.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Äîáðå äîøëè ïðè ìàãüîñíèêà çà íàñòðîéêà íà ìðåæà\n"
-"\n"
-"Âèå ñòå íà ïúò äà íàñòðîèòå Èíòåðíåò/ìðåæîâàòà ñè âðúçêà.\n"
-"Àêî íå èñêàòå äà èçïîëçâàòå àâòîìàòè÷íî çàñè÷àíå, èçêëþ÷åòå êóòèéêàòà.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Èçáåðåòå ïðîôèë çà íàñòðîéêà"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Èçïîëçâàé àâòîìàòè÷íî çàñè÷àíå"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Îòêðèâàíå íà óñòðîéñòâà ..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Îáèêíîâåíà ìîäåìíà âðúçêà"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "çàñå÷åí íà ïîðò %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN âðúçêà"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "çàñå÷åíà %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ADSL âðúçêà"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "çàñå÷åí íà èíòåðôåéñ %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Êàáåëíà âðúçêà"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "çàñå÷åíà å êàáåëíà âðúçêà"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "LAN âðúçêà"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "ethernet êàðòè çàñå÷åíè"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Èçáåðåòå âðúçêàòà, êîéòî èñêàòå äà èçïîëçâàòå"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Íàñòðîèëè ñòå íÿêîëêî íà÷èíà çà âðúçêà êúì Èíòåðíåò.\n"
-"Èçáåðåòå òîçè, êîéòî èñêàòå äà èçïîëçâàòå.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Èíòåðíåò âðúçêà"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Èñêàòå ëè äà ñòàðòèðàòå âðúçêàòà ñè ïðè çàðåæäàíå ?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Íàñòðîéêà íà ìðåæàòà"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr "Ìðåæàòà òðÿáâà äà áúäå ðåñòàðòèðàíà"
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Èçíèêíà ïðîáëåì ïðè ðåñòàðòèðàíåòî íà ìðåæàòà:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Ïîçäðàâëåíèÿ, ìðåæîâàòå è Èíòåðíåò íàñòðîéêàòà å çàâúðøåíà.\n"
-"\n"
-"Íàñòðîéêèòå ùå áúäàò ïðèëîæåíè êúì ñèñòåìàòà âè.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Ñëåä êàòî ñòàíå òîâà, ïðåïîðú÷âàìå âè äà ðåñòàðòèðàòå X\n"
-"ñðåäàòà ñè, çà äà èçáåãíåòå ïðîáëåìè ñúñ ñìÿíàòà èìåòî íà õîñòà."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ÂÍÈÌÀÍÈÅ: Òîâà óñòðîéñòâî âå÷å å íàñòðîåíî äà ñå ñâúðçâà êúì Èíòåðíåò.\n"
-"Ïðîñòî ïðèåìåòå, çà äà îñòàâèòå óñòðîéñòâîòî íàñòðîåíî.\n"
-"Ïîïðàâêàòà íà ïîëåòàòà ïî-äîëó ùå ïðåçàïèøå òàçè íàñòðîéêà."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Ìîëÿ, âúâåäåòå IP íàñòðîéêèòå çà òàçè ìàøèíà.\n"
-"Âñÿêî óñòðîéñòâî òðÿáâà äà áúäå âúâåäåíî êàòî IP àäðåñ\n"
-"ñ òî÷êîâî-äåñåòè÷íî îçíà÷åíèå (íàïðèìåð, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Íàñòðîéêà íà ìðåæîâîòî óñòðîéñòâî %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (äðàéâåð %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP àäðåñ"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Ìðåæîâà ìàñêà"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Àâòîìàòè÷åí IP àäðåñ"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP àäðåñúò òðÿáâà äà áúäå âúâ ôîðìàò 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Ìîëÿ, âúâåäåòå host name çà ìàøèíàòà.\n"
-"Host èìåòî òðÿáâà äà áóäå íàïúëíî êâàëèôèöèðàíî èìå,\n"
-"êàòî ``mybox.mylab.myco.com''.\n"
-"Ìîæåòå ñúùî äà âúâåäåòå IP àäðåñà íà Âàøèÿ gateway, àêî èìàòå òàêúâ"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS ñúðâúð"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Gateway óñòðîéñòâî"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Íàñòðîéêà íà proxy"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr "Ïðîñëåäÿâàíå íà ID íà ìðåæîâàòà êàðòà (ïîëåçíî ïðè ëàïòîïè)"
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Proxy-ñúðâúðà òðÿáâà äà å http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Proxy-ñúðâúðà òðÿáâà äà å ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Íàñòðîéêà íà Èíòåðíåò"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Èñêàòå ëè ñåãà äà îïèòàòå âðúçêà êúì Èíòåðíåò ?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Èçïðîáâàíå íà âðúçêàòà..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Ñèñòåìàòà â ìîìåíòà å ñâúðçàíà êúì Èíòåðíåò."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Çà âàøà ñèãóðíîñò, ñåãà òÿ ùå áúäåòå îòâúðçàíà."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Ñèñòåìàòà íå èçãëåæäà ñâúðçàíà êúì Èíòåðíåò.\n"
-"Îïèòàéòå ñå äà ïðåíàñòðîèòå âðúçêàòà."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Íàñòðîéêà íà âðúçêàòà"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Ìîëÿ, ïîïúëíåòå èëè ïðîâåðåòå ïîëåòî ïî-äîëó"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ íà êàðòàòà"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Ïàìåò (DMA) íà êàðòàòà"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "IO íà êàðòàòà"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "IO_0 íà êàðòàòà"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "IO_1 íà êàðòàòà"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Ëè÷íèÿ âè òåëåôîíåí íîìåð"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Èìå íà äîñòàâ÷èêà (íàïð. provider.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Òåëåôîíåí íîìåð íà äîñòàâ÷èêà"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "1-âè DNS íà äîñòàâ÷èêà (ïî æåëàíèå)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "2-ðè DNS íà äîñòàâ÷èêà (ïî æåëàíèå)"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "Èçáåðåòå ñòðàíàòà ñè"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Ðåæèì íà íàáèðàíå"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Ñêîðîñò íà âðúçêàòà"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "Timeout íà âðúçêàòà (â ñåê)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Èìå íà àêàóíòà (ïîòåáèòåëñêî èìå)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Ïàðîëà íà àêàóíòà"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Ðàçøèðåíè äÿëîâå íå ñå ïîääúðæàò íà òàçè ïëàòôîðìà"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Èìàòå ïðàçíèíà â òàáëèöàòà ñ äÿëîâåòå, íî íå ìîãà äà ÿ èçïîëçâàì.\n"
-"Åäèíñòâåíèÿò íà÷èí å äà ïðåìåñòèòå ãëàâíèòå ñè äÿëîâå, çà äà èìàòå ïðàçíî "
-"ìÿñòî ñëåä extended-äÿëîâåòå"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Âúçñòàíîâÿâàíåòî îò ôàéëà %s íå óñïÿ: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Ëîø backup-ôàéë"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Ãðåøêà ïðè çàïèñ âúâ ôàéëà %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Íåùî ëîøî ñòàâà ñ óñòðîéñòâîòî âè.\n"
-"Òåñòà çà öåëîñò íà äàííèòå ïðîïàäíà.\n"
-"Òîâà çíà÷è, ÷å ïèñàíåòî íà êàêâîòî è áèëî ïî äèñêà ùå ïðåâðúùà\n"
-"ïðîèçâîëíî â áîêëóê"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "íóæåí"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "âàæåí"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "ìíîãî äîáúð"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "äîáúð"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ñòàâà"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Îáùà Unix Ïðèíòåðíà Ñèñòåìà"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Íîâî ïîêîëåíèå"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Ëèíååí Ïðèíòåðåí Äåìîí"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Ïå÷àòàé, Áåç Îïàøêà"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Ëîêàëåí ïðèíòåð"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Îòäàëå÷åí ïðèíòåð"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "Ïðèíòåð íà îòäàëå÷åí CUPS ñúðâúð"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "Ïðèíòåð íà îòäàëå÷åí LPD ñúðâúð"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Ìðåæîâ ïðèíòåð (socket)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Ïðèíòåð íà SMB/Windows 95/98/NT ñúðâúð"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "Ïðèíòåð íà NetWare ñúðâúð"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "Âúâåäåòå URI íà ïå÷àòàùî óñòðîéñòâî"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "Ïðåêàðàé ðàáîòàòà ïðåç êîìàíäà"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "Íåèçâåñòåí ìîäåë"
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(íà %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "(íà òàçè ìàøèíà)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Èçáåðåòå âðúçêà êúì ïðèíòåðà"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Êàê å ñâúðçàí ïðèíòåðúò ?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"Îòäàëå÷åíèòå íà CUPS ñúðâúð ïðèíòåðè íå òðÿáâà äà íàñòðîéâàòå\n"
-"òóê; òåçè ïðèíòåðè ùå áúäàò çàñå÷åíè àâòîìàòè÷íî. Ìîëÿ,\n"
-"èçáåðåòå \"Ïðèíòåð íà îòäàëå÷åí CUPS ñúðâúð\" â òîçè ñëó÷àé."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Íèêàêúâ"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-msgid "Choose a default printer!"
-msgstr "Èçáåðåòå ïðèíòåð ïî ïîäðàçáèðàíå"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-"Ñ îòäàëå÷åíèòå CUPS ñúðâúðè, íÿìà íóæäà äà íàñòðîéâàòà êàêúâòî\n"
-"è äà áèëî ïðèíòåð òóê; CUPS ñúðâúðèòå èíôîðìèðàò àâòîìàòè÷íî ìàøèíàòà\n"
-"çà òåõíèòå ïðèíòåðè. Âñè÷êè ïðèíòåðè èçâåñòíè íà ìàøèíàòà âè\n"
-"ñà èçðåäåíè â ïîëåòî \"Ïðèíòåð ïî ïîðäðàçáèðàíå\". Èçáåðåòå\n"
-"ïðèíòåð ïî ïîäðàçáèðàíå çà ìàøèíàòà ñè îò òàì è öúêíåòå íà áóòîíà\n"
-"\"Ïðèëîæè/Ïðåïðî÷åòè ïðèíòåðèòå\". Öúêíåòå íà ñúùèÿ áóòîí, çà äà\n"
-"îïðåñíèòå ñïèñúêà (ìîæå äà îòíåìå äî 30 ñåêóíäè ñëåä ïóñêàíåòî\n"
-"íà CUPS, äîêàòî âñè÷êè îòäàëå÷åíè ïðèíòåðè ñòàíàò âèäèìè).\n"
-"Êîãàòî CUPS ñúðâúð å íà äðóãà ìðåæà, òðÿáâà äà äàäåòå IP àäðåñ è,\n"
-"åâåíòóëàíî íîìåð íà ïîðò íà CUPS ñúðâúðà, çà äà âçåìåòå èíôîðìàöèÿ\n"
-"çà ïðèíòåðà îò ñúðâúðà, èíà÷å îñòàâåòå ïîëåòî ïðàçíî."
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Îáèêíîâåíî, CUPS àâòîìàòè÷íî ñå íàñòðîéâà ñïîðåä ìðåæîâàòà ñðåäà,\n"
-"òàêà ÷å äà èìàòå äîñòúï äî ïðèíòåðèòå íà CUPS ñúðâúðà â ëîêàëíàòà\n"
-"âè ìðåæà. Àêî íå ñðàáîòè êàêòî òðÿáâà, èçêëþ÷åòå \"Àâòîìàòè÷íà\n"
-"CUPS íàñòðîéêà\" è ïîïðàâåòå ôàéëà /etc/cups/cupsd.conf ðú÷íî. Íå\n"
-"çàáðàâÿéòå äà ðåñòàðòèðàòå CUPS ñëåä òîâà (êîìàíäà: \"service\n"
-"cups restart\")."
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Çàòâîðè"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "Ïðèëàãàíå/Ïðåïðî÷èò íà ïðèíòåðèòå"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP àäðåñúò òðÿáâà äà áúäå âúâ ôîðìàò 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "Íîìåðúò íà ïîðòà òðÿáâà äà å öÿëî ÷èñëî !"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "Ïðèíòåð ïî ïîäðàçáèðàíå"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "IP íà CUPS ñúðâúðà"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Ïîðò"
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr "Àâòîìàòè÷íà íàñòðîéêà íà CUPS"
-
-#: ../../printerdrake.pm_.c:217
-msgid "Detecting devices ..."
-msgstr "Çàñè÷àíå íà óñòðîéñòâà ..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Òåñòâàíå ïîðòîâåòå"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Ïðèíòåð îò ìîäåëà \"%s\", å íàìåðåí íà "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Ëîêàëíî ïå÷àòàùî óñòðîéñòâî"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Êúäå å ñâúðçàí âàøèÿ ïðèíòåð  \n"
-"(çàáåëåæêà: /dev/lp0 å åêâèâàëåíòíî íà LPT1) ?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Ïå÷àòàùî óñòðîéñòâî"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "Ëèïñâà èìå íà óñòðîéñòâî/ôàéë !"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-msgid "Reading printer database ..."
-msgstr "×åòåíå íà áàçàòà äàííè îò ïðèíòåðè ..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Îïöèè íà îòäàëå÷åí lpd-ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Çà äà èçïîëçâàòå îòäàëå÷åí lpd ïðèíòåð, òðÿáâà\n"
-"äà ïðåäîñòàâèòå èìåíàòà íà õîñòà íà ïðèíòåðíèÿ ñúðâúð è\n"
-"èìåòî íà ïðèíòåðà íà òîçè ñúðâúð."
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "Èìå íà îòäàëå÷åí õîñò"
-
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "Èìå íà îòäàëå÷åí ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "Ëèïñâà èìå íà èìå íà õîñò !"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "Ëèïñâà èìå íà îòäàëå÷åí ïðèíòåð !"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Íàñòðîéêè íà SMB (Windows 9x/NT) ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Çà äà ïå÷àòàòå íà SMB ïðèíòåð, òðÿáâà äà äàäåòå èìåòî\n"
-"íà SMB õîñòà (Çàáåëåæêà ! Òî ìîæå äà å ðàçëè÷íî îò TCP/IP õîñòà !)\n"
-"è âúçìîæíî IP àäðåñà íà ïðèíòåðñêèÿ ñúðâúð, êàêòî è îáùîòî èìå íà\n"
-"ïðèíòåðà, äî êîéòî èñêàòå äîñòúï è ïîäõîäÿùî èìåí, ïàðîëà è èíôîðìàöèÿ\n"
-"çà ðàáîòíàòà ãðóïà."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "Õîñò íà SMB ñúðâúð"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "IP íà SMB ñúðâúð:"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Îáùî èìå"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Ðàáîòíà ãðóïà"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Òðÿáâà äà áúäàò çàäàäåíè è èìåòî è IP àäðåñà íà ñúðâúðà !"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "Ëèïñâà èìå íà SAMBA share !"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "Îïöèè çà NetWare ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Çà äà ïå÷àòèòå íà NetWare ïðèíòåð ,òðÿáâà äà çíàåòå èìåî ìó è âúçìîæíî\n"
-"àäðåñà íà ñúðâúðà, êàêòî è èìåòî íà îïàøêàòà,ïîòðåáèòåëñêîòî èìå,ïàðîëà."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Ñúðâúð íà ïðèíòåðà"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Èìå íà ïå÷àòíàòà îïàøêàòà"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "Ëèïñâà èìå íà NCP ñúðâúð !"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "Ëèïñâà èìå íà NCP îïàøêà !"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Îïöèè íà Socket ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Çà äà ïå÷àòàòå íà socket ïðèíòåð, òðÿáâà äà ïðåäîñòàâèòå\n"
-"èìåòî íà õîñòà íà ïðèíòåðà è, åâåíòóàëíî, íîìåð íà ïîðò.\n"
-"Íà HP JetDirect ñúðâúðè, íîìåðúò íà ïîðòà îáèêíîâåííî å 9100,\n"
-"íà äðóãè ñúðâúðè ìîæå äà âàðèðà. Âèæòå ðúêîâîñòâîòî íà\n"
-"õàðäóåðà ñè."
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "Èìå íà õîñò íà ïðèíòåðà"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "Ëèïñâà èìå íà õîñò íà ïðèíòåða !"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Ïå÷àòàùî óñòðîéñòâî URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Òðÿáâà äèðåêòíî äà îïðåäåëèòå URI çà äîñòúï äî ïðèíòåðà. URI òðÿáâà äà "
-"èçïúëíè èëè CUPS èëè Foomatic ñïåöèôèêàöèèòå. Îòáåëåæåòå, ÷å íå âñè÷êè "
-"òèïîâå URI ñå ïîääðúðæàò îò spooler-èòå."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "Òðÿáâà äà áúäå âúâåäåí âàëèäåí URI !"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Âñåêè ïðèíòåð ñå íóæäàå îò èìå (íàïðèìåð lp).\n"
-"Ïîëåòàòà Îïèñàíèå è Ìåñòîïîëîæå íå òðÿáâà äà áúäàò\n"
-"ïîïúëâàíè. Èìà êîìåíòàðè çà ïîòðåáèòåëèòå."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Èìå íà ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Îïèñàíèå"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Ìåñòîïîëîæåíèå"
-
-#: ../../printerdrake.pm_.c:701
-msgid "Preparing printer database ..."
-msgstr "Ïîäãîòâÿíå íà áàçàòà äàííè îò ïðèíòåðè ..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "Èçáîð ìîäåë íà ïðèíòåðà"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "Êàêúâ ìîäåë ïðèíòåð èìàòå ?"
-
-#: ../../printerdrake.pm_.c:866
-msgid "OKI winprinter configuration"
-msgstr "Íàñòðîéêè íà OKI Winprinter"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-msgid "Lexmark inkjet configuration"
-msgstr "Íàñòðîéêà íà Lexmark inkjet"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-"Inkjet ïðèíòåðíèòå äðàéâåðè ïðåäîñòàâåíè îò Lexmark ïîääúðæàò\n"
-"ñàìî ëîêàëíè ïðèíòåðè, áåç ïðèíòåðè íà îòäàëå÷åíè ìàøèíè èëè\n"
-"ïðèíòåðíè ìàøèíè. Ìîëÿ, ñâúðæåòå ïðèíòåðà ñè íà ëîêàëåí ïîðò\n"
-"èëè ãî íàñòðîéòå íà ìàøèíàòà, êúì êîÿòî å ñâúðçàí."
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"Íàñòðîéêè íà ïðèíòåðà ïî ïîäðàçáèðàíå\n"
-"Òðÿáâà äà ñòå ñèãóðíè, ÷å ãîëåìèíàòà íà ñòðàíèöàòà\n"
-"è òèïà íà ìàñòèëîòî (àêî èìà) ñà íàñòðîåíè ïðàâèëíî.\n"
-"Îòáåëåæåòå, ÷å ïðè ìíîãî âèñîêî êà÷åñòî íà èçõîäà íà\n"
-"ïðèíòåðà, òîé ìîæå çíà÷èòåëíî äà ñå çàáàâè."
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Íàñòðîéêàòà %s òðÿáâà äà å öÿëî ÷èñëî !"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Íàñòðîéêàòà %s òðÿáâà äà å ÷èñëî !"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Îïöèÿòà %s å èçâúí ãðàíèöèòå !"
-
-#: ../../printerdrake.pm_.c:1136
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Èñêàòå ëè äà íàñòðîèòå òîçè ïðèíòåð (\"%s\")\n"
-"êàòî ïðèíòåð ïî ïîäðàçáèðàíå ?"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "Òåñòîâè ñòðàíèöè"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"Ìîëÿ, èçáåðåòå òåñòîâà ñòðàíèöà çà ïå÷àò.\n"
-"Çàáåëåæêà: òåñòîâàòà ñòðàíèöà çà ñíèìêà ìîæå äà îòíåìå äîñòà äúëãî\n"
-"âðåìå äà ñå èçïå÷àòà è íà ëàçåðíè ïðèíòåðè ñ ìàëêî ïàìåò ìîæå âúîáùå\n"
-"äà íå èçëåçå.  ïîâå÷åòî ñëó÷àè å äîñòàòú÷íà ñòàíäàðòíà òåñòîâà ñòðàíèöà."
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "Áåç òåñòîâè ñòðàíèöè"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "Ïå÷àò"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "Ñòàíäàðòíà òåñòîâà ñòðàíèöà"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr "Àëòåðíàòèâíà òåñòîâà ñòðàíèöà (Ïèñìî)"
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr "Àëòåðíàòèâíà òåñòîâà ñòðàíèöà (À4)"
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "Òåñòîâà ñòðàíèöà ñúñ ñíèìêà"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Îòïå÷àòâàíå íà òåñòîâ(àòà/èòå) ñòðàíèö(à/è) ..."
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Òåñòîâèòå ñòðàíèöè ñà èçïðàòåíè êúì ïðèíòåðà.\n"
-"Ìîæå äà îòíåìå ìàëêî âðåìå ïðåäè ïðèíòåðà äà çàïî÷íå.\n"
-"Ñúñòîÿíèå íà ïå÷àòà:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Òåñòîâèòå ñòðàíèöè ñà èçïðàòåíè êúì ïðèíòåðíà.\n"
-"Ìîæå äà îòíåìå ìàëêî âðåìå ïðåäè ïðèíòåðà äà çàïî÷íå.\n"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "Ïðîðàáîòè ëè êàêòî òðÿáâà ?"
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-msgid "Raw printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Çà äà èçïå÷àòàòå ôàéë îò êîìàíäíèÿ ðåä (òåðìèíàëåí ïðîçîðåö), ìîæåòå èëè äà "
-"èçïîëçâàòå êîìàíäàòà \"%s <file>\" èëè ãðàôè÷íèÿ ïå÷àòàù èíñòðóìåíò: \"xpp "
-"<file>\" èëè \"qtcups <file>\". Ãðàôè÷íèòå èíñòðóìåíòè âè ïîçâîëÿâàò äà "
-"èçáèðàòå ïðèíòåðà è äà ïîïðàâÿòå ëåñíî íàñòðîéêèòå íà îïöèèòå.\n"
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ìîæåòå äà èçïîëçâàòå òàçè êîìàíäà è â ïîëåòî \"Êîìàíäà çà ïå÷àò\" íà "
-"ïå÷àòíèòå äèàëîçè â ìíîƒî ïðèëîæåíèÿ. Íî ò¢ê íå ïîñòàâÿéòå èìåòî íà ôàéëà, "
-"çàùîòî òî ñå ïîäàâà îò ïðèëîæåíèåòî.\n"
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Êîìàíäàòà \"%s\" ñúùî òàêà âè ïîçâîëÿâà äà ïîïðàâèòå íàñòðîéêèòå íà îïöèèòå "
-"çà îïðåäåëåíà ðàáîòà íà ïðèíòåðà. Ïðîñòî äîáàâåòå öåëàíèòå íàñòðîéêè êúì "
-"êîìàíäíèÿ ðåä, íàïð. \"%s <file>\". "
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-"Çà äà âèäèòå ñïèñúê íà äîñòúïíèòå îïöèè çà òåêóùèÿ ïðèíòåð, èëè ïðî÷åòåòå "
-"ñïèñúêà ïîêàçàí ïî-äîëó èëè öúêíåòå íà áóòîíà \"Ñïèñúê ñ îïöèè çà ïå÷àò\".\n"
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Çà äà èçïå÷àòàòå ôàéë îò êîìàíäíèÿ ðåä (òåðìèíàëåí ïðîçîðåö) èçïîëçâàéòå "
-"êîìàíäàòà \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ìîæåòå äà èçïîëçâàòå òàçè êîìàíäà è â ïîëåòî \"Êîìàíäà çà ïå÷àò\" íà "
-"ïå÷àòíèòå äèàëîçè â ìíîãî ïðèëîæåíèÿ. Íî òóê íå ïîñòàâÿéòå èìåòî íà ôàéëà, "
-"çàùîòî òî ñå ïîäàâà îò ïðèëîæåíèåòî.\n"
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-"Çà äà âèäèòå ñïèñúê ñ äîñòúïíèòå îïöèè çà òåêóùèÿ ïðèíòåð, öúêíåòå íà áóòîíà "
-"\"Ñïèñúê ñ îïöèè çà ïå÷àò\".\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Çà äà îòïå÷àòàòå ôàéë îò êîìàíäíèÿ ðåä (òåðìèíàëåí ïðîçîðåö), èçïîëçâàéòå "
-"êîìàíäàòà \"%s <file>\" èëè \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Êîìàíäèòå \"%s\" è \"%s\" ñúùî òàêà ïîçâîëÿâàò äà ïîïðàâÿòå èçáðàíèòå "
-"íàñòðîéêè çà îïðåäåëåíà ðàáîòà íà ïðèíòåðà. Ïðîñòî äîáàâåòå èñêàíèòå "
-"íàñòðîéêè êúì êîìàíäíèÿ ðåä, íàïð. \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1292
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Ïå÷àòàíå íà ïðèíòåð \"%s\""
-
-#: ../../printerdrake.pm_.c:1294
-msgid "Print option list"
-msgstr "Ñïèñúê ñ ïðèíòåðíè îïöèè"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "×åòåíå íà äàííè îò ïðèíòåðà ..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "Ïðåíîñ íà íàñòðîéêà íà ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-"Ìîæåòå äà êîïèðàòå íàñòðîéêèòå íà ïðèíòåðà, êîèòî ñòå èçâúðøèëè\n"
-"çà spoller %s íà %s, òåêóùèÿ spooler. Öÿëàòà èíôîðìàöèÿ çà íàñòðîéêèòå\n"
-"(èìå íå ïðèíòåð, îïèñàíèå, ìåñòîïîëîæåíèå, âèä íà âðúçêàòà è\n"
-"íàñòðîéêè ïî ïîäðàçáèðàíå) ñå ïðåçàïèñâàò, íî ðàáîòèòå íå ñå\n"
-"ïðåõâúðëÿò.\n"
-"Íå âñè÷êè îïàøêè ìîãàò äà áúäàò ïðåõâúðëåíè ïî ñëåäíèòå ïðè÷èíè:\n"
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-"CUPS íå ïîääúðæà ïðèíòåðè íà Novell ñúðâúðè èëè ïðèíòåðè\n"
-"èçïðàùàùè äàííè âúâ ñâîáîäíî-èçãðàäåíà êîìàíäà.\n"
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-"PDQ ïîääúðæà ñàìî ëîêàëíè ïðèíòåðè, îòäàëå÷åíè LPD ïðèíòåðè\n"
-"è Socket/TCP ïðèíòåðè.\n"
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD è LPRng íå ïîääúðæà IPP ïðèíòåðè.\n"
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-"Êàòî äîïúëíåíèå, îïàøêèòå íå ñúçäàäåíè ñ òàçè ïðîãðàìà\n"
-"èëè \"foomatic-configure\" íå ìîãàò äà áúäàò ïðåõâúðëÿíè."
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-"\n"
-"Ñúùî òàêà, ïðèíòåðè íàñòðîåíè ñ PPD ôàéëîâå ïðåäîñòàâåíè\n"
-"îò ïðîèçâîäèòåëèòå èì èëè ñ îðèãèíàëíè CUPS äðàéâåðè íå\n"
-"ìîãàò äà áúäàò ïðåõâúðëÿíè."
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Îòáåëåæåòå ïðèíòåðèòå, êîèòî èñêàòå äà ïðåõâúðëèòå è öúêíåòå\n"
-"\"Ïðåõâúðëè\"."
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "Íå ïðåõâúðëÿé ïðèíòåðè"
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "Ïðåõâúðëè"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Ïðèíòåð ñ èìå \"%s\" âå÷å ñúùåñòâóâà â %s.\n"
-"Öúêíåòå \"Ïðåõâúðëè\", çà äà ãî ïðåçàïèøåòå.\n"
-"Ìîæåòå ñúùî òàêà äà íàïèøåòå íîâî èìå èëè äà ïðîïóñíòå ïðèíòåðà."
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Èìåòî íà ïðèíòåðà òðÿáâà äà ñúäúðæà ñàìî áóêâè, ÷èñëà è ïîä÷åðòàâêà"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Ïðèíòåðúò \"%s\" âå÷å ñúùåñòâóâà,\n"
-"íàèñòèíà ëè èñêàòå äà ïðåçàïèøåòå íàñòðîéêàòà ?"
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "Íîâî èìå íà ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Ïðåõâúðëÿíå íà %s ..."
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-"Ïðåõâúðëèëè ñòå ïðèíòåð ïî ïîäðàçáèðàíå (\"%s\"),\n"
-"Èñêàòå ëè äà ãî îñòàâèòå ïî ïîäðàçáèðàíå â íîâàòà\n"
-"ïðèíòåðíà ñèñòåìà %s ?"
-
-#: ../../printerdrake.pm_.c:1423
-msgid "Refreshing printer data ..."
-msgstr "Îïðåñíÿâàíå íà äàííèòå îò ïðèíòåðà ..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr "Íàñòðîéêà íà îòäàëå÷åí ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:1432
-msgid "Starting network ..."
-msgstr "Ñòàðòèðàíå ìðåæàòà ...."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-msgid "Configure the network now"
-msgstr "Â ìîìåíòà íàñòðîéâàì ìðåæàòà"
-
-#: ../../printerdrake.pm_.c:1455
-msgid "Network functionality not configured"
-msgstr "Ôóíêöèîíàëíîñòòà íà ìðåæàòà íå å íàñòðîåíà"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-msgid "Go on without configuring the network"
-msgstr "Ïðîäúëæè áåç íàñòîéêà íà ìðåæàòà"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-"Íÿìàøå äîñòúï äî ìðåæàòà è òàêúâ íå ìîæåøå äà áúäå\n"
-"óñòàíîâåí. Ìîëÿ, ïðîâåðåòå íàñòðîéêàòà è õàðäóåðà\n"
-"ñè. Òîãàâà îïèòàéòå äà íàñòðîèòå îòäàëå÷åíèÿ ïðèíòåð\n"
-"îòíîâî."
-
-#: ../../printerdrake.pm_.c:1516
-msgid "Restarting printing system ..."
-msgstr "Ðåñòàðòèðàíå íà ïðèíòåðíàòà ñèñòåìà"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "high"
-msgstr "âèñîêî"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "paranoid"
-msgstr "ïàðàíîè÷íî"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Èíñòàëèðàíå íà ïðèíòåðíàòà ñèñòåìà â %s íèâî íà ñèãóðíîñò"
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Starting the printing system at boot time"
-msgstr "Ñòàðòèðàíå íà ïðèíòåðíàòà ñèñòåìà ïðè ñòàðòèðàíå"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "Ïðîâåðêà íà èíñòàëèðàíèÿ ñîôòóåð..."
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "Èçòðèâàíå íà LPRng..."
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "Èçòðèâàíå íà LPD..."
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Èçáåðåòå ïðèíòåðåí spooler"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Êîÿ ïðèíòåðíà ñèñòåìà (spooler) èçêàòå äà èçïîëçâàòå ?"
-
-#: ../../printerdrake.pm_.c:1759
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Íàñòðîéêà íà ïðèíòåðà \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Îïöèè íà ïðèíòåðà"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr "Ïîäãîòâÿíå íà PinterDrake ..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "Èñêàòå ëè äà íàñòðîèòå ïå÷àòà ?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr "Ïå÷àòíà ñèñòåìà: "
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-"Ñëåäíèòå ïðèíòåðè ñà íàñòðîåíè.\n"
-"Öúêíåòå íà åäèí îò òÿõ, çà äà ãî ðåäàêòèðàòå\n"
-"èëè çà äà ïîëó÷èòå èíôîðìàöèÿ çà íåãî, èëè\n"
-"âúðõó \"Äîáàâè Ïðèíòåð\", çà äà äîáàâèòå íîâ ïðèíòåð."
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Íîðìàëåí ðåæèì"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Ïî ïîäðàçáèðàíå)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Ïðèíòåð(è) íà îòäàëå÷åí(è) CUPS ñúðâúð(è)"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-msgid "Printer(s) on remote server(s)"
-msgstr "Ïðèíòåð(è) íà îòäàëå÷åí(è) ñúðâúð(è)"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Äîáàâè ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-msgid "Do you want to configure another printer?"
-msgstr "Èñêàòå ëè äà íàñòðîèòå äðóã ïðèíòåð ?"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "Ïîïðàâè íàñòðîéêèòå íà ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Ïðèíòåð %s: %s %s\n"
-"Êàêâî èñêàòå äà ïîïðàâèòå ïî òîçè ïðèíòåð ?"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "Äàâàé !"
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "Òèï íà âðúçêàòà êúì ïðèíòåðà"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "Èìå íà ïðèíòåðà, îïèñàíèå, ìåñòîïîëîæåíèå"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "Ïðîèçâîäèòåë íà ïðèíòåðà, ìîäåë, äðàéâåð"
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "Ïðîèçâîäèòåë íà ïðèíòåðà, ìîäåë"
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr "Îïðåäåëè òîçè ïðèíòåð çà ïîëçâàíå ïî ïîäðàçáèðàíå"
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "Îòïå÷àòâàíå íà òåñòîâè ñòðàíèöè"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "Ïðåìàõâàíå íà ïðèíòåðà"
-
-#: ../../printerdrake.pm_.c:2071
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Èçòðèâàíå íà ñòàð ïðèíòåð \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Ïðèíòåðúò \"%s\" âå÷å å îïðåäåëåí çà ïîëçâàíå ïî ïîäðàçáèðàíå."
-
-#: ../../printerdrake.pm_.c:2103
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Íàèñòèíà ëè èñêàòå äà ïðåìàõíåòå ïðèíòåðà \"%s\" ?"
-
-#: ../../printerdrake.pm_.c:2105
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Èçòðèâàíå íà ïðèíòåðà \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy íàñòðîéêà"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Äîáðå äîøëè â íàñòðîéêàòà íà Proxy.\n"
-"\n"
-"Òóê ùå ìîæåòå äà óñòàíîâèòå âàøèòå HTTP è FTP proxy\n"
-"ñúñ èëè áåç ïîòðåáèòåëñêî èìå è ïàðîëà\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Ìîëÿ, ïîïúëíåòå èíôîðìàöèÿòà çà HTTP proxy.\n"
-"Îñòàâåòå ïðàçíî, àêî íå èñêàòå HTTP proxy."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "ïîðò"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URL òðÿáâà äà å çàïî÷âà ñ 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Íîìåðúò íà ïîðò òðÿáâà äà å öèôðà"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Ìîëÿ, ïîïúëíåòå èíôîðìàöèÿòà çà FTP proxy.\n"
-"Îñòàâåòå ïðàçíî, àêî íå èñêàòå FTP proxy."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL òðÿáâà äà çàïî÷âà ñ 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Ìîëÿ, âúâåäåòå èìå è ïàðîëà çà proxy, àêî èìà.\n"
-"Îñòàâåòå ïðàçíî, àêî íå èñêàòå èìå/ïàðîëà"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "ïîòðåáèòåëñêî èìå"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "ïàðîëà"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "îùå âåäíúæ ïàðîëà"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Ïàðîëèòå íà ñúâïàäàò. Îïèòàéòå ïàê !"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Íå ìîãà äà ïðèáàâÿ äÿë êúì _ôîðìàòèðàí_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ôàéëúò %s íå ìîæå äà áúäå çàïèñàí"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ïðîïàäíà"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ïðîïàäíà (ìîæå áè raidtools ëèïñâàò ?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Íÿìà äîñòàòú÷íî äÿëîâå çà RAID íèâî %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Ïóñíè ALSA (Advanced Linux Sound Architecture) çâóêîâàòà ñèñòåìà"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacrton - ïåðèîäè÷íî èçïúëíÿâàíå íà êîìàíäè ïî ðàçïèñàíèå."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd ñå èçïîëçâà çà íàáëþäåíèå íà áàòåðèÿòà è çàïèñâàéêè ñòàòóñà ÷ðåç\n"
-"syslog. Ìîæå ñúùî äà ñå èçïîëçâà çà ñïèðàíå íà ìàøèíàòà, êîãàòî áàòåðèÿòà å "
-"èçòîùåíà."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Ïóñêà êîìàíäè ïî ðàçïèñàíèå âúâ âðåìå îïðåäåëåíî îò êîìàíäàòà at è ïóñêà\n"
-"íàáîð îò äðóãè, êîãàòî íàòîâàðåíîñòòà ñïàäíå äîñòàòú÷íî."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron å ñòàíäàðòíà UNIX ïðîãðàìà, êîÿòî ïåðèîäè÷íî ïóñêà îïðåäåëåíè ïðîãðàìè\n"
-"ïî ðàçïèñàíèå. vixie cron äîáàâÿ ìíîæåñòâî ïðåèìóùåñòâà íàä òåçè íà ïðîñòèÿ\n"
-"UNIX cron, âêëþ÷èòåëíî ïî-äîáðà ñèãóðíîñò è ìîùíè íàñòðîéâàùè îïöèè."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM äîáàâÿ ïîääðúæêà íà ìèøêà â òåêñòîâî-áàçèðàíèòå Linux ïðèëîæåíèÿ êàòî\n"
-"Midnight Commander. Ñúùî òàêà ïîçâîëÿâà áàçèðàíèòå íà ìèøêà êîíçîëè\n"
-"ðåæè-è-ëåïè îïåðàöèè, è âêëþ÷âà ïîääðúæêà íà èçêà÷àùè ìåíþòà íà êîçîëàòà."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake ïðàâè ïðîáè íà õàðäóåðà, è åâåíòóàëíî íàñòðîéâà\n"
-"íîâ/ïðîìåíåí õàðäóåð."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache å World Wide Web (WWW) ñúðâúð. Òîé ñëóæè äà îáðàáîòâà íà HTML "
-"ôàéëîâå\n"
-"è CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver daemon (÷åñòî íàðè÷àí inetd) ïóñêà ðàçëè÷íè äðóãè\n"
-"Èíòåðíåò óñëóãè. Òîé îòãîâàðÿ çà ïóñêàíåòî íà ìíîãî óñëóãè îò ðîäà íà\n"
-"telnet, ftp, rsh è rlogin. Èçêëþ÷âàíåòî íà inetd èçêëþ÷âà âñè÷êè óñëóãè,\n"
-"çà êîèòî îòãîâàðÿ."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Âêëþ÷è ôèëòðèðàíåòî íà ïàêåòè çà Linux ÿäðà ñåðèÿ 2.2, çà\n"
-"íàñòðîêà íà çàùèòíàòà ñòåíà, s cel çàùèòàâà íà ìàøèíàòà âè îò\n"
-"ìðåæîâè àòàêè."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Òîçè ïàêåò çàðåæäà ìàðêèðàíàòà êëàâèàòóðíà íàðåäáà â /etc/sysconfig/"
-"keyboard.\n"
-"Òÿ ìîæå äà áúäå èçáðàíà ñ èíñòðóìåíòà kbdconfig. Òðÿáâà äà îñòàâèòå "
-"òîâàâêëþ÷åíî çà ïîâå÷åòî ìàøèíè."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Àâòîìàòè÷íî ðåãåíåðèðàíå íà header-èòå íà àäðîòî, â /boot çà\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Àâòîìàòè÷íî çàñè÷àíå è íàñòðîéêà íà õàðäóåðà ïðè ñòàðòèðàíå."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf ïîíÿêîãà óðåæäà èçâúðøâàíåòî íà ðàçëè÷íè çàäà÷è\n"
-"ïðè ñòàðòèðàíå çà ïîääðúæêà íà ñèñòåìíàòà íàñòðîéêà."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd å äåìîíà çà ïå÷àò íåîáõîäèì íà lpr äà ðàáîòè íîðìàëíî. Òîé ïðîñòî å\n"
-"ñúðâúð, êîéòî îïðåäåëÿ ðàáîòèòå çà ïå÷àò íà ïðèíòåð(à/èòå)."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server ñå èçïîëçâà çà èçãðàæäàíå íà âèñîêîïðîèçâîäèòåëåí\n"
-"è äîáðå äîñòúïåí ñúðâúð."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) å Domain Name Server (DNS), êîéòî ñå èçïîëçâà äà ïðåâúðíå\n"
-"èìåòî íà õîñòà äî IP àäðåñ."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Ìîíòèðà è äåìîíòèðà âñÿêàêâè Network File System (NFS), SMB (LAN\n"
-"Manager/Windows), è NCP (NetWare)."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Àêòèâèðà/äåàêòèâèðà âñè÷êè ìðåæîâè èíòåðôåéñè, íàñòðîåíè äà ñå ïóñêàò\n"
-"ïðè ñòàðòèðàíå íà ìàøèíàòà."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS å ïîïóëÿðåí ïðîòîêîë çà îáìåí íà ôàéëîâå ïî TCP/IP ìðåæè.\n"
-"Òàçè óñëóãà îñèãóðÿâà ôóíêöèîíàëíîñòòà íà NFS ñúðâúðà, êîéòî ñå íàñòðîéâà\n"
-"÷ðåç ôàéëà /etc/exports."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS å ïîïóëÿðåí ïðîòîêîë çà îáìåí íà ôàéëîâå ïî TCP/IP ìðåæè.\n"
-"Òàçè óñëóãà îñèãóðÿâà ôóíêöèîíàëíîñòòà íà çàêëþ÷âàíåòî íà NFS ôàéëîâåòå."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Àâòîìàòè÷íî âêëþ÷âàíå íà numlock êëàâèøà ïîä êîíçîëà è\n"
-"XFree ïðè ñòàðòèòàíå."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Ïîääðúæêà íà OKI 4w è ñúâìåñòèìè win-ïðèíòåðè."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA ïîääúðæêàòà îáèêíîâåííî ïîääúðæà íåùà êàòî ethernet è ìîäåìè â\n"
-"laptop-è. Òîâà íÿìà äà ñå ñòàðòèðà ïðåäè äà áúäå íàñòðîåí, òàêà ÷å å\n"
-"ïî-äîáðå äà ÿ èìàòå èíñòàëèðàíà íà ìàøèíè, êîèòî íå ñå íóæäàÿò îò íåÿ."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper ñå ñïðàâÿ ñ RPC âðúçêè, êîèòî ñå èçïîëçâàò îò ïðîòîêîëè êàòî\n"
-"NFS è NIS. portmap ñúðâúðà òðÿáâà äà å ïóñíàò íà ìàøèíè, êîèòî ðàáîòÿò êàòî\n"
-"ñúðâúð çà ïðîòîêîëè, êîèòî ñå íóæäàÿò äà èçïîëçâàò RPC ìåõàíèçúì."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix å Main Transport Agent (MTA), êîéòî å ïðîãðàìà êîÿòî ïðåíàñÿ\n"
-"ïîøà îò ìàøèíà íà ìàøèíà."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Çàïàçâà è âúçñòàíîâÿòà ïîòîêà íà ñèñòåìíà åíòðîïèÿ çà ïî-ãîëÿìî êà÷åñòâî\n"
-"íà ïðîèçâîëíî ãåíåðèðàíå íà ÷èñëà."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Ñâúðæè ÷èñòè äðàéâåðè ñ áëîêîâè óñòðîéñòâà (êàòî äÿëîâå\n"
-"íà òâúðäèÿ äèñê), çà óïîòðåáÿòà îò ïðèëîæåíèÿ êàòî Oracle"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"touted äåìîíà ïîçâîëÿâà òàáëèöà çà IP ðóòèðàíå àâòîìàòè÷íî îáíîâÿâàíà ÷ðåç\n"
-"RIP ïðîòîêîëà. Äîêàòî RIP å øèðîêî èçïîëçâàíà çà ìàëêè ìðåæè, çà ïî-ñëîæíè\n"
-"ïðîòîêîëè çà ðóòèðàíå ñà íóæíè çà ñëîæíè ìðåæè. "
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat ïðîòîêîëà ïîçâîëÿâà íà ìðåæîâèòå ïîòðåáèòåëè äà èçâëè÷àò\n"
-"ïàðàìåòðèòå íà âúçìîæíîñòèòå çà âñÿêà ìàøèíà íà ìðåæàòà."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers ïðîòîêîëà ïîçâîëÿâà íà ìðåæîâèòå ïîòðåáèòåëè äà ïðîâåðÿâàò êîé å\n"
-"âëÿçúë íà äðóãà îòãîâàðÿùàòà ìàøèíà."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho ïðîòîêîëà ïîçâîëÿâà íà îòäàëå÷åíè ïîòðåáèòåëè äà ñå ñäîáèÿò ñúñ ñïèñúê\n"
-"íà âñè÷êè ïîòðåáèòåëè âëåçëè íà ìàøèíà ñ ðàáîòåù rwho äåìîí (ïîäîáåí íà "
-"finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Ïóñíêàíå çâóêîâàòà ñèñòåìà íà ìàøèíàòà âè"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog å ïðîãðàìà êîÿòî ìíîãî äåìîíè èçïîëçâàò äà çàïàçâàò ñúîáùåíèÿ â\n"
-"ðàçëè÷íè ñèñòåìíè ôàéëîâå (ëîãîâå). Äîáðå å ïîñòîÿííî äà ÿ èìàòå ðàáîòåùà."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Çàðåæäàíå äðàéâåðè çà âàøèòå USB óñòðîéñòâà."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Ñòàðòèðà X Font Server (òîâà å çàäúëæèòåëíî, çà äà òðúãíå XFree)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Èçáèðà óñëóãèòå, êîèòî òðÿáâà äà ñå ïóñíàò ïðè ïóñêàíå íà ìàøèíàòà"
-
-#: ../../services.pm_.c:126
-msgid "Printing"
-msgstr "Ïå÷àòàíå"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Èíòåðíåò"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr "Ïîäåëÿíå íà ôàéëîâå"
-
-#: ../../services.pm_.c:132
-msgid "System"
-msgstr "Ñèñòåìà"
-
-#: ../../services.pm_.c:137
-msgid "Remote Administration"
-msgstr "Îòäàëå÷åíà àäìèíèñòðàöèÿ"
-
-#: ../../services.pm_.c:145
-msgid "Database Server"
-msgstr "Ñúðâúð Áàçè-äàííè"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Óñëóãè: %d àêòèâèðàíè îò %d ðåãèñòðèðàíè"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Óñëóãè"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "ñòàðòèðàíå"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "ñïðÿíà"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Óñëóèãè è äåìîíè"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Íÿìà äîïúëíèòåëíà èíôîðìàöèÿ\n"
-"çà òàçè óñëóãà, ñúæåëÿâàì."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ïðè çàðåæäàíå"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Èíñòàëèðàíå íà ïàêåòè ..."
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Íå ìîãà äà ðàç÷åòà òàáëèöàòà íà äÿëîâåòå, ïðåêàëåíî å ïîâðåäåíà :(\n"
-"Ùå ñå îïèòàì äà ïðîäúëæà äà ðàç÷èñòâàì ëîøèòå äÿëîâå"
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "Ãðåøêà !"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Íå ìîãà äà íàìåðÿ íóæíà êàðòèíêà `%s'."
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "Íàñòðîé÷èê íà àâòîìàòè÷íà èñíòàëàöèÿ"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "Íàñòðîéêà íà àâòîìàòè÷íèòå ñòúïêè"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Ìîëÿ, èçáåðåòå çà âñÿêà ñòúïêà, äàëè ùå ñå ïðåèãðàå êàòî ïðè èíñòàëàöèÿòà, "
-"èëè ùå áúäå ðú÷íà"
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Ïîçäðàâëåíèÿ !"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Äèñêåòàòà å óñïåøíî ñúçäàäåíà.\n"
-"Ñåãà ìîæåòå äà ïðåèãðàåòå èíñòàëàöèÿòà."
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Ñïîäåëÿíå íà âðúçêàòà ñ Èíòåðíåò"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Ñïîäåëÿíåòî íà âðúçêàòà êúì Èíòåðíåò å âå÷å àêòèâèðàíî"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Óñòàíîâêàòà íà Ñïîäåëÿíåòî íà Èíòåðíåò âðúçêàòà å çàâúðøåíà.\n"
-" ìîìåíòà å âêëþ÷åíà.\n"
-"\n"
-"Êàêâî èñêàòå äà íàïðàâèòå ?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "èçêëþ÷è"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "îñòàâè"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "ïðåíàñòðîéêà"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Èçêëþ÷âàíå íà ñúðâúðè ..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Ñïîäåëÿíåòî íà Èíòåðíåò âðúçêàòà â ìîìåíòà å èçêëþ÷åíî."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Ñïîäåëÿíåòî íà Èíòåðíåò âðúçêàòà å èçêëþ÷åíî."
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Óñòàíîâêàòà íà Ñïîäåëÿíåòî íà Èíòåðíåò âðúçêàòà å âå÷å çàâúðøåíà.\n"
-" ìîìåíòà å èçêëþ÷åíà.\n"
-"\n"
-"Êàêâî èñêàòå äà íàïðàâèòå ?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "âêëþ÷è"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Âêëþ÷âàíå íà ñúðâúðè ..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Ñïîäåëÿíåòî íà Èíòåðíåò â ìîìåíòà å âêëþ÷åíî."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Íà ïúò ñòå äà íàñòðîèòå êîìïþòúðà ñè òàêà, ÷å äà ïîäåëÿ Èíòåðíåò âðúçêàòà\n"
-"ñè. Ñ òàçè âúçìîæíîñò, äðóãè êîìïþòðè â ëîêàëíàòà âè ìðåæà ùå ìîãàò äà\n"
-"èçïîëçâàò Èíòåðíåò âðúçêàòà íà òîçè êîìïþòúð.\n"
-"\n"
-"Îòáåëåæåòå: òðÿáâà âè îòäåëåí çà òîâà ìðåæîâ àäàïòåð, çà äà óñòàíîâèòå "
-"âúòðåøíàòà ñè ìðåæà (LAN)."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Èíòåðôåéñ %s (èçïîëçâàù ìîäóë %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Èíòåðôåéñ %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Íÿìàòå ìðåæîâ àäàïòåð!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Â ñèñòåìàòà íå å îòêðèò ethernet ìðåæîâ àäàïòåð. Ìîëÿ, ñòàðòèðàéòå "
-"èíñòðóìåíòà çà íàñòðîéêà íà õàðäóåð."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Ìðåæîâ èíòåðôåéñ"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Â ñèñòåìàòà âè èìà ñàìî åäèí íàñòðîåí ìðåæîâ àäàïòåð:\n"
-"\n"
-"%s\n"
-"\n"
-"Ñìÿòàì äà óñòàíîâÿ ëîêàëíàòà âè ìðåæà íà òîçè àäàïòåð."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Ìîëÿ èçáåðåòå êîé ìðåæîâ àäàïòåð äà áúäå âêëþ÷åí êúì ëîêàëíàòà âè ìðåæà."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr "Âíèìàíèå, ìðåæîâèÿò àäàïòåð âå÷å å íàñòðîåí. Ùå ãî ïðåíàñòðîÿ."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Âúçìîæåí êîíôèêò ñ àäðåñèòå â LAN ñ íàñòðîéêàòà íà %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Îòêðèòà å íàñòðîéêà íà Çàùèòíà Ñòåíà !"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Âíèìàíèå ! Îòêðèòà å íàñòðîéêà íà Çàùèòíà Ñòåíà. Ìîæå äà ñå íàëîæè íÿêàêâà "
-"ðú÷íà ïîïðàâêà ñëåä èíñòàëàöèÿòà."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Íàñòðîéêà ..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Íàñòðîéâàùè ñêðèïòîâå, èíñòàëèðàíå íà ñîôòóåð, ñòàðòèðàíå íà ñúðâúðè..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Ïðîáëåìè ñ èíñòàëèðàíåòî íà ïàêåòà %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Âñè÷êî å íàñòðîåíî.\n"
-"Ñåãà ìîæåòå äà ñïîäåëèòå Èíòåðíåò âðúçêàòà ñè ñ äðóãè êîìïþòðè â ëîêàëíàòà "
-"âè ìðåæà èçïîëçâàéêè àâòîìàòè÷íà ìðåæîâà íàñòðîéêà (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Óñòàíîâêàòà âå÷å å íàïðàâåíà, íî â ìîìåíòà å èçêëþ÷åíà."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Óñòàíîâêàòà âå÷å å íàïðàâåíà è â ìîìåíòà å âêëþ÷åíà."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Íÿìà íàñòðîéâàíî ñïîäåëÿíå íà Èíòåðíåò âðúçêàòà."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Íàñòðîéêà íà ñïîäåëÿíåòî íà Èíòåðíåò âðúçêàòà"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Äîáðå äîøëè â èíñòðóìåíòà çà ñïîäåëÿíå íà Èíòåðíåò âðúçêàòà !\n"
-"\n"
-"%s\n"
-"\n"
-"Öúêíåòå ``Íàñòðîé'', àêî èñêàòå äà ñòàðòèðàíå óñòàíîâÿâàùèÿ ìàãüîñíèê."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Íàñòðîéêà íà ìðåæàòà (%d àäàïòåðà)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Ïðîôèë: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Èçòðîé ïðîôèë ..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Ïðîôèë çà èçòðèâàíå:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Íîâ ïðîôèë ..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Èìå íà ñúçäàâàíèÿ ïðîôèë (íîâèÿò ïðîôèë ñå ñúçäàâà êàòî êîïèå íà òåêóùèÿ):"
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Èìå íà õîñò:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Èíòåðíåò äîñòúï"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Òèï: "
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Èíòåðôåéñ:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Ñúñòîÿíèå:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Ñâúðçàí"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Íå ñâúðçàí"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Ñâúðçâàíå ..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Îòâúðçâàíå ..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Ñòàðòèðàíå íà âðúçêàòà ...."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Çàòâàðÿíå íà âðúçêàòà âè ..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Âðúçêàòà íå å çàòâîðåíà.\n"
-"Îïèòàéòå ñå äà ãî íàïðàâèòå ðú÷íî, êàòî ñòàðòèðàòå\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"êàòî root."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Ñèñòåìàòà â ìîìåíòà íå å ñâúðçàíà."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Íàñòðîéêà íà Èíòåðíåò äîñòúïà ..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "Íàñòðîéêà íà LAN"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Äðàéâåð"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Èíòåðôåéñ"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Ïðîòîêîë"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "Ñúñòîÿíèå"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Íàñòîéêà íà ëîêàëíà ìðåæà ..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr "Öúêíåòå òóê, çà äà ñòàðòèðàòå ìàãüîñíèêà ->"
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Ïðèëîæè"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Ìîëÿ, ïî÷àêàéòå ... Ïðèëàãàíå íà íàñòðîéêèòå"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Íÿìàòå íàñòðîåí èíòåðôåéñ.\n"
-"Íàñòðîéòå ãè ïðåäè òîâà, êàòî öúêíåòå íà 'Íàñòðîéêà'"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "Íàñòðîéêà íà ëîêàëíà ìðåæà"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Àäàïòåð %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Ñòàðòèðàù ïðîòîêîë"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Ïóñíàò ïðè ñòàðòèðàíå"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP êëèåíò"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "àêòèâèðàé ñåãà"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "äåàêòèâèðàé ñåãà"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Íÿìàòå Internet âðúçêà.\n"
-"Ñúçäàéòå òàêàâà, êàòî öúêíåòå íà 'Íàñòðîé'"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Íàñòðîéêà íà Èíòåðíåò âðúçêà"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Íàñòðîéêà íà Èíòåðíåò âðúçêà"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Òèï íà âðúçêàòà: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Ïàðàìåòðè"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Ethernet êàðòà"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP êëèåíò"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Äîáðå äîøëè ïðè Cracker-èòå"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Ëîøî"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Ïàðàíîè÷íî"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Òîâà íèâî ñå èçïîëçâà ñ âíèìàíèå. Òîâà êàðà ñèñòåìàòà âè ïî-ëåñíà çà\n"
-"óïîòðåáà, íî å ïî-÷óâñòâèòåëíî: íå òðÿáâà äà áúäå èçïîëçâàíà íà ìàøèíè\n"
-"ñâúðçàíè ñ äðóãè èëè ïî Èíòåðíåò. Íÿìà äîñòúï ñ ïàðîëè."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Ïàðîëàòà ñåãà å âêëþ÷åíà, íî èçïîëçâàíåòî êàòî ìðåæîâ êîìïþòúð íå å "
-"ïðåïîðú÷èòåëíî."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Íÿêîè ïîäîáðåíèÿ çà òîâà íèâî íà ñèãóðíîñò. Ãëàâíîòî å, ÷å èìà ïîâå÷å\n"
-"ïðåäóïðåæäåíèÿ è ïðîâåðêè çà ñèãóðíîñò."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Òîâà å ñòàíäàðòíàòà ñèãóðíîñò ïðåïîðú÷èòåëíà çà êîìïþòúð, êîéòî ùå áúäå\n"
-"èçïîëçâàí äà ñå ñâúðçâà êúì Èíòåðíåò êàòî êëèåíò. Èìà ïðîâåðêè íà "
-"ñèãóðíîñòòà. "
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Ñ òîâà íèâî íà ñèãóðíîñò, ïîëçâàíåòî íà ñèñòåìàòà êàòî ñúðâúð ñòàâà "
-"âúçìîæíî.\n"
-"Ñèãóðíîñòòà ñåãà å äîñòàòú÷íî ãîëÿìà äà ñå èçïîëçâà ñèñòåìàòà êàòî\n"
-"ñúðâúð ïðèåìàù âðúçêè îò ìíîãî êëèåíòè. "
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Èçáèðàìå 4-òî íèâî, íî ñèñòåìàòà å íàïúëíî çàòâîðåíà.\n"
-"Íèâîòî íà ñèãóðíîñò å íà ìàêñèìóìà ñè."
-
-#: ../../standalone/draksec_.c:65
-msgid "Security level"
-msgstr "Íèâî íà ñèãóðíîñò"
-
-#: ../../standalone/draksec_.c:67
-msgid "Use libsafe for servers"
-msgstr "Èçïîëçâàéòå libsafe çà ñúðâúðè"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Áèáëèîòåêà, êîÿòî îñèãóðÿâà çàùèòà îò aòàêè ñ ïðåïúëâàíå íà áóôåð è ôîðìàòíè "
-"ñòðèíãîâå."
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Èçáåðåòå íèâî íà ñèãóðíîñò"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Êîíòðîëåí öåíòúð"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Èçáåðåòå èíñòðóìåíòà, êîéòî èñêàòå äà èçïîëçâàòå"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "óïîòðåáà: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Èñêàòå ëè BackSpace äà ïîäàâà Delete íà êîíçîëàòà ?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Ñìÿíà íà CD-ROM"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Ìîëÿ, ñëîæåòå Èíñòàëàöèîííèÿ CD-ROM â óñòðîéñòâîòî è íàòèñíåòå Ok, êîãàòî "
-"ñòå ãîòîâè.\n"
-"Àêî ãî íÿìàòå, íàòèñíåòå Îòìÿíà, çà äà èçáåãíåòå èíñòàëèðàíåòî îò òîçè CD-"
-"ROM."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Íå ìîãà äà ïóñíà îáíîâÿâàíåòî !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "íå å íàìåðåí serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Äà ñèìóëèðàì ëè òðåòè áóòîí ?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Íàñòðîéêà íà Çàùèòíà Ñòåíà"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Íàñòðîéêà íà Çàùèòíà Ñòåíà"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Çàùèòíà ñòåíà\n"
-"\n"
-"Âå÷å ñòå íàñòðîèëè çàùèòíà ñòåíà.\n"
-"Öúêíåòå Íàñòðîé, çà äà óñòàíîâèòå ñòàíäàðòíà çàùèòíà ñòåíà"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Çàùèòíà ñòåíà\n"
-"\n"
-"Öúêíåòå Íàñòðîé, çà äà óñòàíîâèòå ñòàíäàðòíà çàùèòíà ñòåíà"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Èçáîð íà åçèê"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Èçáîð íà êëàñ èíñòàëàöèÿ"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Çàñè÷àíå íà äèñêîâåòå"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Íàñòðîéêà íà ìèøêà"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Èçáîð íà êëàâèàòóðà"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Ñèãóðíîñò"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Ôàéëîâè ñèñòåìè"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Ôîðìàòèðàíå íà äÿëîâå"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Ïàêåòè çà èíñòàëèðàíå"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Èíñòàëèðàíå íà ñèñòåìàòà"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Äîáàâÿíå íà ïîòðåáèòåë"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Íàñòîéêà íà ìðåæàòà"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Íàñòðîéêà íà óñëóãèòå"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Ñúçäàâàíå íà boot-äèñêåòà"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Èíñòàëèðàíå íà bootloader"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Íàñòðîéêà íà Õ"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Èçõîä îò èíñòàëàöèîííàòà ïðîãðàìà"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Íàñòðîé÷èê çà ìàëêà çàùèòíà ñòåíà\n"
-"\n"
-"Òîâà íàñòðîéâà ïåðñîíàëíà çàùèòíà ñòåíà çà òàçè Mandrake Linux ìàøèíà.\n"
-"Çà ìîùíî ïîñòâåòåíî íà çàùèòàòà ðåøåíèå, ìîëå, ïîãëåäíåòå ñïåöèàëèçèðàíàòà\n"
-"MandrakeSecurity Firewall äèñòðèáóöèÿ."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Ñåãà ùå âè çàäàäåì âúïðîñè çà òîâà, êúì êîè óñëóãè áèõòå èñêàëè äà\n"
-"ïîçâîëèòå íà Èíòåðíåò äà ñâúðçâà. Ìîëÿ, ïîìèñëåòå âíèìàòåëíî ïî\n"
-"òåçè âúïðîñè, òúé êàòî ñèãóðíîñòòà íà êîìïþòúðà âè å âàæíà.\n"
-"\n"
-"Ìîëÿ, àêî â ìîìåíòà íå èçïîëçâàòå íÿêîÿ îò óñëóãèòå, çàùèòåòå ÿ.\n"
-"Ìîæåòå äà ïðîìåíèòå íàñòðîéêàòà ïî âñÿêî âðåìå, àêî èñêàòå, êàòî\n"
-"ñòàðòèðàòå îòíîâî òîâà ïðèëîæåíèå !"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Èçïîëçâàòå ëè Web ñúðâúð íà òàçè ìàøèíà, êîéòî èñêàòå öåëèÿò Èíòåðíåò\n"
-"çà âèæäà ? Àêî èçïîëçâàòå, êîéòî òðÿáâà äà áúäå äîñòúïåí îò òàçè ìàøèíà,\n"
-"ìîæåòå ñïîêîéíî äà îòãîâîðèòå ñ Íå òóê.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Èçïîëçâàòå ëè Name ñúðâúð íà òàçè ìàøèíà ? Àêî íå èñêàòå äà ïðåäîñòàâÿòå\n"
-"èíôîðìàöèÿ çà IP-òà è çîíè íà öåëèÿ Èíòåðíåò, ìîëÿ, îòãîâîðåòå Íå.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Èñêàòå ëè äà ðàçðåøèòå âõîäÿùè Secure SHell (SSH) âðúçêè ? Òîâà å\n"
-"çàìåñòèòåë íà telnet, êîéòî ìîæåòå äà èçïîëçâàòå çà âëèçàíå. Àêî â\n"
-"ìîìåíòà èçïîëçâàòå telnet, îïðåäåëåíî òðÿáâà äà ïðåìèíåòå êúì SSH.\n"
-"Telnet íå å êðèïòèðàí -- òàêà ÷å íÿêîè àòàêóâàùè ìîãàò äà îòêðàäíàò\n"
-"ïàðîëàòà âè, àêî ãî èçïîëçâàòå. SSH å êðèïòèðàí è èçêëþ÷âà òàêàâà\n"
-"èçäúíêà."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Èñêàòå ëè äà ïîçâîëèòå âõîäÿùè telnet âðúçêè ?\n"
-"Òîâà å óæàñíî íåñèãóðíî, êàêòî îáÿñíèõìå â ïðåäèøíèÿ åêðàí. Ñèëíî\n"
-"âè ïðåïîðú÷âàìå äà îòãîâîðèòå Íå òóê è äà èçïîëçâàòå SSH âìåñòî\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Èìàòå ëè FTP ñúðâúð òóê, êîéòî òðÿáâà äà å äîñòúïåí çà Èíòåðíåò ?\n"
-"Àêî èìàòå, ñèëíî âè ïðåïîðú÷âàìå äà ãî èçïîëçâàòå çà àíîíèìíè òðàíñôåðè.\n"
-"Âñè÷êè ïàðîëè èçïðàùàíè ïî FTP ìîãàò äà áúäàò îòêðàäíàòè îò àòàêóâàùà\n"
-"ëè÷íîñò, òúé êàòî FTP íå èçïîëçâà êðèïòîãðàôèÿ çà ïðåõâúðëÿíåòî èì.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Èìàòå ëè ïîùåíñêè ñúðâúð òóê ? Àêî èçïðàùàòå ñúîáùåíèÿòà ñè\n"
-"÷ðåç pine, mutt èëè êàêúâòî è äà å äðóã òåêñòîâ ïîùåíñêè êëèåíò,\n"
-"ìîæå áè èìàòå.  ïðîòèâåí ñëó÷àé, òðÿáâà äà çàùèòèòå òîâà.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Èìàòå ëè POP èëè IMAP ñúðâúð òóê ? Òîâà ìîæå äà áúäå\n"
-"èçïîëçâàíî äà ïðèþòÿâàíå íà íå-web-áàçèðàíè ïîùåíñêè àêàóíòè\n"
-"ïðåç òàçè ìàøèíà.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Ñÿêàø èçïîëçâàòå 2.2 ÿäðî. Àêî ìðåæîâîòî IP àâòîìàòè÷íî ñå\n"
-"îïðåäåëÿ îò êîìïþòúð ó âàñ èëè â îôèñà (äèíàìè÷íî ïîñòàâÿíî),\n"
-"òðÿáâà äà ïîçâîëèì òîâà. Òàêúâ ëè å ñëó÷àÿ ?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Âðåìåòî íà êîìïþòúðà âè ñèíõðîíèçèðà ëè ñå ñ äðóã êîìïþòúð ?\n"
-"Òîâà ãëàâíî ñå èçïîëçâà â ñðåäíî-ãîëåìè Unix/Linux îðãàíèçàöèè,\n"
-"çà äà ñè ñèíõðîíèçèðà âðåìåòî çà çàïèñâàíå íà ñòàòóñà è òàêèâà ðàáîòè.\n"
-"Àêî íå ñòå ÷àñò îò ïî-ãîëÿì îôèñ è íå ñòå ÷óâàëè çà òàêîâà íåùî,\n"
-"ìîæå áè íå âè òðÿáâà."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Íàñòðîéêàòà çàâúðøåíà. Äà çàïèøåì ëè ïðîìåíèòå íà äèñêà ?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Íå ìîãà äà îòâîðÿ %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Íå ìîãà äà îòâîðÿ %s çà çàïèñ: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Ñúðâúð, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Ìðåæîâ êîìïþòúð (êëèåíò)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS ñúðâúð, SMB ñúðâúð, Proxy ñúðâúð, SSH ñúðâúð"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Îôèñ"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome ðàáîòíà ñòàíöèÿ"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Èíñòðóìåíòè çà âàøèÿ Palm Pilot èëè Visor-à âè"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Ðàáîòíà ñòàíöèÿ"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Ñúðâúð, Firewall/Ðóòåð"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Èìå íà äîìåéí è Ìðåæîâ Èíôîðìàöèîíåí Ñúðâúð"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Îôèñ ïðîãðàìè: word-ïðîöåñîðè (kword, abiword), òàáëèöè (kspread, gnumeric), "
-"ïðåãëåä íà PDF, è ò.í."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Èíñòðóìåíòè çà àóäèî: MP3 èëè MIDI ïëåéúðè, ìèêñåðè, è ò.í. "
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Êíèãè è HOTWO-òà çà Linux è ñâîáîäíèÿ ñîôòóåð"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE ðàáîòíà ñòàíöèÿ"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm è ò.í."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Ìóëòèìåäèÿ - Âèäåî"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Íàáîð îò èíñòðóìåíòè çà ïîùà, íîâèíè, web, ôàéëîâ òðàíñôåð, è ÷àò"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Ñúðâúð, Áàçè-äàííè"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL èëè MySQL ñúðâúð çà áàçè-äàííè"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Èíñòðóìåíòè çà óëåñíÿâàíå íàñòðîéêàòà íà êîìïþòúðà âè"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Ìóòèìåäèÿ - Çâóê"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Èíñòðóìåíòè"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Äîêóìåíòàöèÿ"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Êîíçîëíè èíñòðóìåíòè"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix ïîùåíñêè ñúðâúð, Inn íîâèíàðñêè ñúðâúð"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Èíòåðíåò ñòàíöèÿ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Ìóòèìåäèéíà ñòàíöèÿ"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Íàñòðîéêà"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Îùå ãðàôè÷íè desktop-è (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"The K Desktop Environment, ïðîñòà ñðåäà ñ êîëåêöèÿ îò ïðèäðóæàâàùè "
-"èíñòðóìåíòè"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ãðàôè÷íà ñðåäà"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Ðàçðàáîòêà"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache è Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Èíñòðóìåíòè çà ñúçäàâàíå è îïè÷àíå íà CD-òà"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Îôèñíà ðàáîòíà ñòàíöèÿ"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, è ò.í."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Ãðàôè÷íè ïðîãðàìè êàòî The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "FND/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Áèáëèîòåêè çà ðàçðàáîòêà íà C è C++, ïðîãðàìè è include ôàéëîâå"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Ìðåæîâ êîìïþòúð, ñúðâúð"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Ñúðâúð, Ïîùà/Groupware/Íîâèíè"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Èãðàëíà ñòàíöèÿ"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Âèäåî ïëåéúðè è ðåäàêòîðè"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Ìóëòèìåäèÿ - Ãðàôèêà"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Çàáàâíè ïðîãðàìè: àðêàäíè èãðè, èãðè íà ìàñà, ñòðàòåãèè è ò.í."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Íàáîð îò èíñòðóìåíòè çà ÷åòåíå è èçïðàùàíå íà ïîùà è íîâèíè (pine, mutt, "
-"tin..) è çà îáèêàëÿíå èç Ìðåæàòà"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Àðõèâèðàøè, åìóëàöèÿ, íàáëþäåíèå"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Ëè÷íè ôèíàíñè"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Ãðàôè÷íà ñðåäà ñ ïîòðåáèòåëñêè íàáîð îò ïðèëîæåíèÿ è desktop èíñòðóìåíòè"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Êëèåíòè çà ðàçëè÷íè ïðîòîêîëè âêëþ÷èòåëíî SSH"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Èíòåðíåò gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Ïðîãðàìè çà ïóñêàíå/ïîïðàâÿíå íà çâóê è âèäåî"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Äðóãè ãðàôè÷íè desktop-è"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Ðåäàêòîðè, øåëîâå, ôàéëîâè èíñòðèìåíòè, òåðìèíàëè"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Ïðîãðàìè çà îáðàáîòêà íà ôèíàíñè, êàòî gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Èãðè"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Îáðàáîòêà íà ëè÷íà èíôîðìàöèÿ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Ìóëòèìåäèÿ - îïè÷àíå íà CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Íàó÷íà ðàáîòíà ñòàíöèÿ"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "íå ìîãà äà îòâîðÿ /etc/sysconfig/autologin çà ÷åòåíå: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Èñêàòå ëè äà ðåñòàðòèðàì ìðåæàòà ?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Ñúãëàñíè ëè ñòå ?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Íà ïúò ñúì äà ðåñòàðòèðàì ìðåæîâîòî óñòðîéñòâî:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr ""
-#~ "Íà ïúò ñúì äà ðåñòàðòèðàì ìðåæîâîòî óñòðîéñòâî %s. Ñúãëàñíè ëè ñòå ?"
-
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Îñâåí àêî íå ñòå ñèãóðíè â îáðàòíîòî, îáèêíîâåíèÿ èçáîð å \"/dev/hda\"\n"
-#~ "(ïúðâè âîäåùî IDE äèñê) èëè \"/dev/sda\" (ïúðâè SCSI äèñê)."
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Ñëåäíèòå ïðèíòåðè ñà íàñòðîåíè.\n"
-#~ "Ìîæåòå äîáàâèòå îùå èëè äà ïðîìåíèòå ñúùåñòâóâàùèòå."
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "Àêî ïðîäúëæèòå, ùå ñïðà %s ñðåäàòà âè"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "Âíèìàíèå:\n"
-#~ "Ïðèëàãàéêè íà ïðîìåíèå ïî âðåìå íà ðàáîòà ìîæå äà ñúñèïå X ñðåäàòà âè."
-
-#~ msgid "%s is already in use"
-#~ msgstr "Åòèêåòúò %s ñå èçïîëçâà âå÷å"
-
-#~ msgid "%s not found"
-#~ msgstr "%s íå å íàìåðåíî"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(ìîæå äà ïðè÷èíè çàãóáà íà äàííè)"
-
-#~ msgid "/File/-"
-#~ msgstr "/Ôàéë/-"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/Ôàéë/Çàïèøè _Êàòî"
-
-#~ msgid "/File/_New"
-#~ msgstr "/Ôàéë/_Íîâ"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/Ôàéë/_Îòâîðè"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/Ôàéë/_Çàïèñ"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/Ïîìîù/_Çà..."
-
-#~ msgid "/Options/Test"
-#~ msgstr "/Îïöèè/Òåñò"
-
-#~ msgid "/_Help"
-#~ msgstr "/_Ïîìîù"
-
-#~ msgid "/_Options"
-#~ msgstr "/_Îïöèè"
-
-#~ msgid "<control>N"
-#~ msgstr "<êîíòðîë>N"
-
-#~ msgid "<control>O"
-#~ msgstr "<êîíòðîë>O"
-
-#~ msgid "<control>S"
-#~ msgstr "<êîíòðîë>S"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "Òðÿáâà äà âúâåäåòå êîìàíäåí ðåä !"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Íàñòðîéêà íà ADSL"
-
-#~ msgid "Adapter"
-#~ msgstr "Àäàïòåð"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Äîáàâè ìÿñòî íà ïàêåòèòå"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Ñëåä ôîðìàòèðàíå íà âñè÷êè äÿëîâå,"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Ìîäåì Alcatel"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Ñèãóðíè ëè ñòå, ÷å ñòå åêñïåðò ?\n"
-#~ "Òóê ùå âè áúäàò ïîçâîëåíè ìîùíè, íî îïàñíè íåùà.\n"
-#~ "Àêî Âè áúäå çàäàäåí âúïðîñ: ``Use shadow file for passwords?'',\n"
-#~ "ùå ìîæåòå ëè äà ãî ðàáåðåòå è îòãîâîðèòå?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Àâòîìàòè÷íî èíñòàëèðàíå îò ôëîïè"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Àâòîìàòè÷íè çàâèñèìîñòè"
-
-#~ msgid "Available packages"
-#~ msgstr "Íàëè÷íè ïàêåòè"
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Âíèìàíèå, àêî å âêëþ÷åí numlock ìîæå äà äîâåäå äî èçâåæäàíåòî íà\n"
-#~ "÷èñëà âìåñòî áóêâè (íàïðèìåð: íàòèñêàéêè 'p' äàâà '6')"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Íàñòðîéêà íà íà÷èíà íà ñòàðòèðàíå"
-
-#~ msgid "CUPS starting"
-#~ msgstr "Ñòàðòèðàíå íà CUPS"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Íå ìîæå äà èçïîëçâàòå supermount ïðè âèñîêî íèâî íà ñèãóðíîñò"
-
-#~ msgid "Category"
-#~ msgstr "Êàòåãîðèÿ"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "×àò (IRC èëè ìîìåíòíè ñúîáùåíèÿ) ïðîãðàìè êàòî xchat, licq, gaim è "
-#~ "èíñòðóìåíòè çà òðàíñôåð íà ôàéëîâå"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Ïðîâåðÿâàì çàâèñèìîñòèòå"
-
-#~ msgid "Choice"
-#~ msgstr "Èçáîð"
-
-#~ msgid "Choose"
-#~ msgstr "Èçáåðè"
-
-#~ msgid "Choose package to install"
-#~ msgstr "Èçáåðåòå ïàêåòè çà èíñòàëèðàíå"
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Èçáåðåòå åçèêúò íà êëàâèàòóðàòà âè îò ñïèñúêà ïî-äîëó"
-
-#~ msgid "Collapse all"
-#~ msgstr "Èç÷èñòè âñè÷êî"
-
-#~ msgid "Color configuration"
-#~ msgstr "Íàñòðîéêà íà öâåòîâå"
-
-#~ msgid "Color depth options"
-#~ msgstr "Îïöèè çà äúëáî÷èíà íà öâåòà"
-
-#~ msgid "Command line"
-#~ msgstr "Êîìàíäåí ðåä"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Èíñòðóìåíòè çà êîìóíèêàöèÿ"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Ñúäúðæàíèåòî íà íàñòðîéâàùèÿ ôàéë íå ìîæå äà áúäå ðàçáðàíî."
-
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Íàñòðîéêà íà Lilo/Grub"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Íàñòðîéêà íà LILO/GRUB"
-
-#~ msgid "Configure local network"
-#~ msgstr "Íàñòîéêà íà ëîêàëíàòà ìðåæà"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Íàñòðîéêà íà Èíòåðíåò âðúçêàòà / Íàñòðîéêà íà ëîêàëíàòà ìðåæà"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Íàñòðîéêà íà ÷àñîâà çîíà"
-
-#~ msgid "Configure..."
-#~ msgstr "Íàñòðîé ..."
-
-#~ msgid "Confirm Password"
-#~ msgstr "Ïîòâúðæäåíèå íà ïàðîëàòà"
-
-#~ msgid "Connect"
-#~ msgstr "Ñâúðæè"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Ñâúðçâàíå êúì Èíòåðíåò "
-
-#~ msgid "Connection Time: "
-#~ msgstr "Âðåìå íà âðúçêàòà: "
-
-#~ msgid "Connection complete."
-#~ msgstr "Ñâðúçâàíåòî èçâúðøåíî."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Ñâúðçâàíåòî íå óñïÿ.\n"
-#~ "Ïðîâåðåòå íàñòðîéêàòà â Mandrake Control Center."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Timeout íà âðúçêàòà (â ñåê) [ áåòà, íå å âêàðàíî ]"
-
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Íå ìîæàõ äà îïðåäåëÿ \"%s\" çà ïîëçâàíå ïî ïîäðàçáèðàíå !"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Ñúçäàâàíå íà boot-äèñêåòà"
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Ñúçäàâàíåòî íà boot äèñêåòà å ñèëíî ïðåïîðú÷èòåëíî. Àêî íå\n"
-#~ "ìîæåòå äà ñòàðòèðàòå êîìïþòúðà ñè, òîâà å åäèíñòâåíèÿ íà÷èí äà\n"
-#~ "ñïàñèòå ñèñòåìàòà áåç ïðåèíñòàëàöèÿ."
-
-#~ msgid "Customized"
-#~ msgstr "Ñïåöèàëèçèðàíà"
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "×åøêà (Ïðîãðàìèñòè)"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Ñúðâúð, DNS/DHCP "
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (èëè ADSL) âðúçêà"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Êëèåíòè è ñúðâúð íà áàçè äàííè (MySQL è PostgreSQL)"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Runlevel ïî ïîäðàçáèðàíå"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Ðàçðàáîòêà íà C/C++"
-
-#~ msgid "Development, Database"
-#~ msgstr "Ðàçðàáîòêà, Áàçè-äàííè"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Ðàçðàáîòêà, Èíòåãðèðàíà ñðåäà"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Ðàçðàáîòêà, Ñòàíäàðòíè èíñòðóìåíòè"
-
-#~ msgid "Directory"
-#~ msgstr "Äèðåêòîðèÿ"
-
-#~ msgid "Disable"
-#~ msgstr "Èçêëþ÷è"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Èçêëþ÷âàíå íà Èíòåðíåò âðúçêà"
-
-#~ msgid "Disable network"
-#~ msgstr "Èçêëþ÷âàíå íà ìðåæàòà"
-
-#~ msgid "Disconnect"
-#~ msgstr "Îòâúðæè"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Îòâúðçâàíå îò Èíòåðíåò "
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Îòâúðçâàíåòî îò Èíòåðíåò èçâúðøåíî."
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Îòâúðçâàíåòî îò Èíòåðíåò íå óñïÿ."
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Èñêàòå ëè äà ñúçäàì àâòîìàòè÷íî èíñòàëèðàùà äèñêåòà çà Linux ðåïëèêàöèÿ?"
-
-#~ msgid "ECI modem"
-#~ msgstr "Ìîäåì ECI"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Èçêàðâàíå ñòðàíèöàòà ñëåä ïå÷àò ?"
-
-#~ msgid "Enable"
-#~ msgstr "Âêëþ÷è"
-
-#~ msgid "Enable network"
-#~ msgstr "Âêëþ÷âàíå íà ìðåæàòà"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Çàäåéñòâàíå Num Lock-à ïðè çàðåæäàíå"
-
-#~ msgid "Europe"
-#~ msgstr "Åâðîïà"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Âñÿêà îïàøêà çà ïå÷àò (êúäåòî ñå íàñî÷âàò ðàáîòèòå çà ïå÷àò) ñå íóæäàå\n"
-#~ "îò èìå (îáèêíîâåíî lp) è spool-äèðåêòîðèÿ ñâúðçâàíà ñ íåÿ. Êîå\n"
-#~ "èìå íà äèðåêòîðèÿ äà áúäå èçïîëçâàíî çà òàçè îïàøêà è êàê ñå ñâúðçàí "
-#~ "ïðèíòåðà ?"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Âñåêè ïðèíòåð ñå íóæäàå îò èìå (íàïðèìåð, \"lp\").\n"
-#~ "Äðóãè ïàðàìåòðè êàòî îïèñàíèå íà ïðèíòåðà èëè ìåñòîïîëîæåíèåòî ìó ìîãàò "
-#~ "äà\n"
-#~ "áúäàò îïðåäåëåíè. Êàêâî èìå äà áúäå èçïîëçâàíî çà òîçè ïðèíòåð è\n"
-#~ "êàê å ñâúðçàí òîé ?"
-
-#~ msgid "Expand all"
-#~ msgstr "Ðàçøèðè âñè÷êî"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Äîïúëíèòåëíè GhostScript îïöèè"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Äîïúëíèòåëíè îïöèè çà òåêñò"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Ñúðâúð, Ôàéëîâ/Ïðèíòåðåí/Samba"
-
-#~ msgid "Find Package"
-#~ msgstr "Íàìåðè ïàêåò"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Íàìåðè ïàêåò ñúäúðæàù ôàéë"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Íàìèðàíå íà ëèñòàòà"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Íàìèðàíåòî íà ëèñòà îòíåìà ìàëêî âðåìå"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Ïúðâè DNS ñúðâúð"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Ïîïðàâêà íà stair-stepping òåêñò ?"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Çà FTP è HTTP, ùå òðÿáâà äà äàäåòå ìÿñòî çà hdlist\n"
-#~ "Òî òðÿáâà äà ïðèëè÷à íà URL-òî îòãîðå"
-
-#~ msgid "Format all"
-#~ msgstr "Ôîðìàòèðàé âñè÷êî"
-
-#~ msgid "Format floppy"
-#~ msgstr "Ôîðìàòèðàé äèñêåòàòà"
-
-#~ msgid "France"
-#~ msgstr "Ôðàíöèÿ"
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux ìîæå äà ïîääúðæà íÿêîëêî òèïà ïðèíòåðè. Âñåêè îò òåçè òèïîâå\n"
-#~ "èçèñêâà ðàçëè÷íà óñòàíîâêà.\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî ïðèíòåðúò å ôèçè÷åñêè ñâúðçàí êúì êîìïþòúðà âè, èçáåðåòå \"Ëîêàëåí\n"
-#~ "ïðèíòåð\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî èñêàòå äîñòúï äî ïðèíòåð íàìèðàù ñå íà îòäàëå÷åíà Unix ìàøèíà, "
-#~ "èçáåðåòå\n"
-#~ "\"Îòäàëå÷åí ïðèíòåð\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî èñêàòå äîñòúï äî ïðèíòåð íàìèðàù ñå íà îòäàëå÷åíà Microsoft Windows "
-#~ "ìàøèíà\n"
-#~ "(èëè íà Unix ìàøèíà èçïîëçâàùà SMB ïðîòîêîë), èçáåðåòå \"SMB/Windows "
-#~ "95/98/NT\"."
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Äàéòå èìå (íàïð.: `extra', `commercial')"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Ïðåìàõâàíå íà çàïèñà %s"
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Îáðàáîòêà íà ãðàôèêà"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Êàê èñêàòå äà ñå ñâúðæåòå êúì Èíòåðíåò ?"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Íàìåðåõ ISDN êàðòà:\n"
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Àêî íåùî íå å íàðåä ñ íàñòðîéêàòà íà X, èçïîëçâàéòå òåçè îïöèè çà\n"
-#~ "ïðàâèëíà íàñòðîéêà íà X Window ñèñòåìàòà."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Àêî íå ñòå ñèãóðíè äàëè èíôîðìàöèÿòà ïî-ãîðå å âÿðíà\n"
-#~ "èëè àêî íå çíàåòå èëè íå ñòå ñèãóðíè êàêâî äà âúâåäåòå, âÿðíà èíôîðìàöèÿ\n"
-#~ "ìîæå äà áúäå âçåòà îò Èíòåðíåò äîñòàâ÷èêà âè. Àêî íå âúâåäåòå èíôîðìàöèÿ "
-#~ "çà\n"
-#~ "DNS (name server), òÿ ùå áúäå âçåòà îò Èíòåðíåò äîñòàâ÷èêà âè ïî âðåìå "
-#~ "íà\n"
-#~ "ñâúðçâàíå."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Àêî èìàòå âñè÷êè CD-òà îò ñïèñúêà ïî-ãîðå, íàòèñíåòå Ok. Àêî íÿìàòå\n"
-#~ "íèòî åäíî îò òåçè CD-òà, íàòèñíåòå Îòìÿíà. Àêî âè ëèïñâàò íÿêîè CD-òà, "
-#~ "èçêëþ÷åòå ãè,\n"
-#~ "è íàòèñíåòå Ok."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Àêî ïðåäïî÷èòàòå äà èçïîëçâàòå ãðàôè÷íî âëèçàíå, èçáåðåòå \"Äà\". Â\n"
-#~ "ïðîòèâåí ñëó÷àé, èçáåðåòå \"Íå\"."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Àêî ùå èçïîëçâàòå proxy ñúðâúðè, ìîëÿ, íàñòðîéòå ãè ñåãà. Àêî íåçíàåòå,\n"
-#~ "ïîïèòàéòå ìðåæîâèÿ àäìèíèñòðàòîð èëè Èíòåðíåò äîñòàâ÷èêà ñè."
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Àêî èñêàòå äðóãè åçèöè (îñâåí òîçè, êîéòî èçáðàõòå ïðåäè\n"
-#~ "íà÷àëîòî íà èíñòàëàöèÿòà), êîèòî äà áúäàò äîñòúïíè ñëåä èíñòàëàöèÿòà, "
-#~ "ìîëÿ, èçáåðåòå\n"
-#~ "ãè îò ñïèñúêà ïî-ãîðå. Àêî èñêàòå äà ãè èçáåðåòå âñè÷êè, ïðîñòî èçáåðåòå "
-#~ "\"Âñè÷êè\"."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Àêî èñêàòå äà ìîæåòå äà ïå÷àòàòå, ìîëÿ, èçáåðåòå ñèñòåìà çà ïå÷àò "
-#~ "èçìåæäó\n"
-#~ "CUPS è LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS å íîâà, ìîùíà è ãúâêàâà ñèñòåìà çà ïå÷àò çà Unix ñèñòåìè (CUPS\n"
-#~ "ïðîèçëèçà îò \"Îáùà Unix Ïà÷àòíà Ñèñòåìà\"). Òîâà å ñèñòåìàòà çà ïå÷àò ïî "
-#~ "ïîäðàçáèðàíå â\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR å ñòàðàòà ñèñòåìà çà ïå÷àò, èçïîëçâàíà ïðåäèøíèòå Mandrake Linux "
-#~ "äèñòðèáóöèè.\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî íÿìàòå ïðèíòåð, öúêíåòå \"Íèêàêúâ\"."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Àêî èñêàòå äà ñâúðæèòå êîìïþòúðà ñè êúì Èíòåðíåò èëè êúì\n"
-#~ "ëîêàëíà ìðåæà, ìîëÿ, èçáåðåòå ïîäõîäÿùàòà îïöèÿ. Ìîëÿ, âêëþ÷åòå "
-#~ "óñòðîéñòâîòî\n"
-#~ "ïðåäè äà èçáåðåòå ïîäõîäÿùàòà îïöèÿ, çà äà ïîçâîëèòå íà DrakX äà ãî "
-#~ "çàñå÷å àâòîìàòè÷íî.\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî íÿìàòå íèêàêâà âðúçêà êúì Èíòåðíåò èëè êúì ëîêàëíà ìðåæà, èçáåðåòå\n"
-#~ "\"Èçêëþ÷âàíå íà ìðåæàòà\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî èñêàòå äà íàñòðîèòå ìðåæàòà ïî-êúñíî, ñëåä èíñòàëàöèÿòà, èëè ñòå "
-#~ "ïðèêëþ÷èëè ñ íàñòðîéêàòà íà ìðåæàòà, èçáåðåòå \"Ãîòîâî\"."
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "Àêî ADSL ìîäåìúò âè å Alcatel, èçáåðåòå Alcatel. Èíà÷å, èçáåðåòå ECI."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Àêî ìîäåìúò âè å âúíøåí, ìîæå, âêëþ÷åòå ãî ñåãà, çà äà ïîçâîëèòå íà DrakX "
-#~ "äà ãî çàñå÷å àâòîìàòè÷íî."
-
-#~ msgid ""
-#~ "If your network uses LDAP (or NIS) protocol for authentication, select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "Àêî ìðåæàòà âè èçïîëçâà LDAP (èëè NIS) ïîðîòêîë çà àóòîðèçàöèÿ, èçáåðåòå\n"
-#~ "\"LDAP\" (èëè \"NIS\") çà àóòîðèçàöèÿ. Àêî íå çíàåòå, ïîïèòàéòå ìðåæîâèÿ "
-#~ "ñè\n"
-#~ "àäìèíèñòðàòîð.\n"
-#~ "\n"
-#~ "Àêî êîìïþòúðúò âè íå å ñâúðçàí êúì àäìèíèñòðèðàíà ìðåæà, ìîæå áè ùå "
-#~ "èñêàòå\n"
-#~ "äà èçáåðåòå \"Ëîêàëíè ôàéëîâå\" çà àóòîðèçàöèÿ."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Àêî ìðåæàòà âè èçïîëçâà NIS, èçáåðåòå \"Èçïîëçâàé NIS\". Àêî íå çíàåòå,\n"
-#~ "ïîïèòàéòå ìðåæîâèÿ àäìèíèñòðàòîð."
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "Â êîÿ ñòðàíà ñå íàìèðàòå ?"
-
-#~ msgid "Installed packages"
-#~ msgstr "Èíñòàëèðàíè ïàêåòè"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Èíòåðíåò Èíñòðóìåíòè"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Èíòåðíåò/Ìðåæîâ äîñòúï"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Ãëàâíèòå îïöèè íà LILO è GRUB ñà:\n"
-#~ "  - Boot óñòðîéñòâî: Îïðåäåëÿ èìåòî íà óñòðîéñòâîòî (ò.å. äÿë îò õàðä\n"
-#~ "äèñêà), êîéòî ñúäúðæà boot ñåêòîðà. Èçáåðåòå \"/dev/hda\", îñâåí àêî íå\n"
-#~ "ñòå ñèãóðíè â äðóãî.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Èç÷àêâàíå ïðåäè ñòàðòèðàíå íà ïîäðàçáèðàùèÿ ñå îáðàç: Îïðåäåëÿ "
-#~ "äåñåòèòå\n"
-#~ "îò ñåêóíäàòà, êîèòî çàðåæäàùà ïðîãðàìà äà èç÷àêà ïðåäè ïóñêàíåòî íà "
-#~ "ïúðâèÿ\n"
-#~ "îáðàç. Ïîëåçíî å çà ñèñòåìè, êîèòî ñòàðòèðàò îò äèñêà âåäíàãà ñëåä "
-#~ "âêëþ÷âàíå\n"
-#~ "íà êëàâèàòóðàòà. Çàðåæäàùàòà ïðîãðàìà íå ÷àêà, àêî \"delay\" å\n"
-#~ "ïðîïóñíàò èëè å íóëà.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Âèäåî ðåæèì: Òîâà îïðåäåëÿ òåêñòîâèÿ VGA ðåæèì, êîéòî äà áúäå èçáðàí\n"
-#~ "ïðè íà÷àëíî çàðåæäàíå. Âúçìîæíè ñà ñëåäíèòå ñòîéíîñòè:\n"
-#~ "    * normal: èçáèðà îáèêíîâåí 80x25 òåêñòîâ ðåæèì.\n"
-#~ "\n"
-#~ "    * <number>: èçïîëçâà ñúîòâåòíèÿ òåêñòîâ ðåæèì.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ïî÷èñòâàíå íà \"/tmp\" ïðè çàðåæäàíå: àêî èñêàòå äà ñå èçòðèâàò "
-#~ "âñè÷êè\n"
-#~ "ôàéëîâå è äèðåêòîðèè ñúõðàíÿâàíè â \"/tmp\", êîãàòî çàðåæäàòå ñèñòåìàòà "
-#~ "ñè,\n"
-#~ "èçáåðåòå òàçè îïöèÿ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Òî÷íî RAM, àêî å íóæíî: çà ñúæàëåíèå, íÿìà ñòàíäàðòåí ìåòîä, äà ñå\n"
-#~ "ïîïèòà BIOS çà îáåìà íà RAM â êîìïþòúðà. Êàòî ïîñëåäñòâèå, GNU/Linux "
-#~ "ìîæå\n"
-#~ "äà íå óñïåå äà çàñå÷å ïðàâèëíî îáåìà íà RAM. Àêî å òàêúâ ñëó÷àÿ, òóê\n"
-#~ "ìîæåòå äà çàäàäåòå òî÷íèÿ îáåì íà RAM. Ìîëÿ, îòáåëåæåòå ÷å îò 2 èëè 4 MB\n"
-#~ "ìåæäó çàñå÷åíàòà è ïðèñúñòâàùàòà RAM å íîðìàëíà."
-
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "Íàñòðîéêà íà LILO/Grub"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Ëîêàëíàòà ìðåæà âå÷å å íàñòðîåíà.\n"
-#~ "Èñêàòå ëè äà:"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Äîïúëíèòåëíè"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Äîïúëíèòåëíè âúïðîñè"
-
-#~ msgid "Modify printer"
-#~ msgstr "Ïîïðàâè ïðèíòåð"
-
-#~ msgid "Multimedia"
-#~ msgstr "Ìóëòèìåäèÿ"
-
-#~ msgid "Name of queue"
-#~ msgstr "Èìå íà îïàøêà"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Èìå íà ñúçäàâàíèÿ ïðîôèë:"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Íàáëþäàâàíå íà ìðåæàòà"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Ìðåæîâ ïðèíòåð 1 (eth0):"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Íÿìà CDROM (íÿìà íèùî â /mnt/cdrom)"
-
-#~ msgid "No match"
-#~ msgstr "Íÿìà ñúâïàäåíèÿ"
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Íå áåøå îòêðèò ìîäåì. Ìîëÿ, ïîñî÷åòå ñåðèéíèÿ ïîðò, êúì êîéòî å ñâúðçàí.\n"
-#~ "\n"
-#~ "\n"
-#~ "Çà èíôîðìàöèÿ, ïúðâèÿò ñåðèåí ïîðò (íàðè÷àí \"COM1\" ïîä Microsoft\n"
-#~ "Windows) ñå íàðè÷à \"ttyS0\" ïîä Linux."
-
-#~ msgid "No more match"
-#~ msgstr "Íÿìà ïîâå÷å ñúâïàäåíèÿ"
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Ñåãà å âðåìå äà íàñòðîèòå X Window System, êîÿòî å ÿäðîòî íà \n"
-#~ "GNU/Linux GUI (Ãðàôè÷åí Ïîðåáèòåëñêè Èíòåðôåéñ). Çà òàçè öåë òðÿáâà äà\n"
-#~ "íàñòðîèòå âèäåîêàðòàòà è ìîíèòîðà ñè. Ïî-ãîëÿìàòà ÷àñò îò ñòúïêèòå ñà\n"
-#~ "àâòîìàòèçèðàíè, òàêà ÷å ðàáîòàòà âè ìîæå áè ùå ñå ñúñòîè ñàìî îò "
-#~ "ïðîâåðêà\n"
-#~ "êàêâî å íàïðàâåíî è ïðèåìàíåòî íà íàñòðîéêèòå :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Êîãàòî íàñòðîéêàòà çàâúðøè, X ùå áúäå ñòàðòèðàí (îñâåí àêî íå óêàæåòå íà\n"
-#~ "DrakX äà íå ãî ïðàâè), çà äà ïðîâåðèòå äàëè íàñòðîéêèòå âè óñòðîéâàò. "
-#~ "Àêî\n"
-#~ "íå âè óñòðîéâàò, ìîæåòå äà ñå âðúùàòå è äà ãè ïðîìåíÿòå, êîëêîòî ïúòè âè\n"
-#~ "å íåîáõîäèìî."
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Ñåãà, ñëåä êàòî Èíòåðíåò âðúçêàòà âè å íàñòðîåíà,\n"
-#~ "êîìïþòúðúò âè ìîæå äà áúäå íàñòðîåí íà ñïîäåëÿ Èíòåðíåò âðúçêàòà ñè.\n"
-#~ "Îòáåëåæåòå: çà òîâà âè òðÿáâà óñòàíîâåí îòäåëåí ìðåæîâ àäàïòåð, çà äà "
-#~ "óñòàíîâèòå âúòðåøíàòà ñè ìðåæà (LAN).\n"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Áðîé ñòðàíèöè çà èçõîäíè ñòðàíèöè"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Îòâàðÿíå íà âðúçêàòà âè ..."
-
-#~ msgid "Other countries"
-#~ msgstr "Äðóãè ñòðàíè"
-
-#~ msgid "Package"
-#~ msgstr "Ïàêåòà"
-
-#~ msgid "Paper Size"
-#~ msgstr "Ðàçìåð íà õàðòèÿòà"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Èçáåðåòå ïðåäïî÷èòàí åçèê çà èíñòàëàöèÿ è ñèñòåìíî èçïîëçâàíå."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Ìîëÿ, èçáåðåòå ïîäõîäÿùè çà ïðèíòåðà âè íàñòîéêè.\n"
-#~ "Ìîëÿ, ïîãëåäíåòå äîêóìåíòàöèÿòà, àêî íå çíàåòå êàêâî äà èçáåðåòå òóê.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ùå ìîæåòå äà èçïðîáâàòå íàñòðîéêàòà â ñëåäâàùàòà ñòúïêà è äà ÿ ñìåíèòå, "
-#~ "àêî íå ðàáîòè êàêòî òðÿáâà."
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Ìîëÿ, èçïðàòåòå ñëåäíàòà èíôîðìàöèÿ"
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Ìîëÿ, âêëþ÷åòå ìîäåìà ñè è èçáåðåòå ïîäõîäÿùèÿ."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Ìîëÿ, âêëþ÷åòå ïðèíòåðà ñè ïðåäè äà ïðîäúëæèòå, çà äà ïîçâîëèòå íà DrakX "
-#~ "äà\n"
-#~ "ãî çàñå÷å.\n"
-#~ "\n"
-#~ "Òðÿáâà äà âúâåäåòå íÿêàêâà èíôîðìàöèÿ òóê.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Èìå íà ïðèíòåð: ïî ïîäðàçáèðàíå, ïå÷àòíèÿ spooler èçïîëçâà \"lp\" "
-#~ "êàòî èìå íà ïðèíòåð. Òàêà ÷å òðÿáâà äà èìàòå\n"
-#~ "ïðèíòåð íàðå÷åí \"lp\".\n"
-#~ "     Àêî èìàòå ñàìî åäèí ïðèíòåð, ìîæåòå äà èçïîëçâàòå íÿêîëêî èìåíà çà "
-#~ "íåãî. Òðÿáâà ñàìî äà ãè îòäåëèòå ñ pipe\n"
-#~ "     ñèìâîëà (\"|\"). Òàêà ÷å, àêî ïðåäïî÷èòàòå ïî-ñìèñëåíî èìå, ìîæåòå "
-#~ "äà ãî ñëîæèòå ïúðâî, íàïð. \"My printer|lp\".\n"
-#~ "     Ïðèíòåðúò ñúäúðæàù \"lp\" â èìåòî(àòà) ñè ùå ñå ïîëçâà ïî "
-#~ "ïîäðàçáèðàíå.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Îïèñàíèå: Òîâà å íåçàäúëæèòåëíî, íî ìîæå äà å ïîëåçíî, àêî èìà "
-#~ "íÿêîëêî ïðèíòåðà ñâúðçàíè êúì êîìïþòúðà âè èëè àêî\n"
-#~ "     ðàçðåøàâàòå äîñòúï äî íåãî íà äðóãè êîìïþòðè.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Ìåñòîïîëîæåíèå: àêî èñêàòå äà äàäåòå èíôîðìàöèÿ çà ìåñòîïîëîæåíèåòî\n"
-#~ "     íà ïðèíòåðà ñè, íàïðàâåòå ãî òóê (ìîæåòå äà íàïèøåòå êàêâîòî ñè "
-#~ "èñêàòå,\n"
-#~ "     íàïðèìåð \"2-ðè åòàæ\").\n"
-
-#~ msgid "Press next to continue."
-#~ msgstr "Íàòèñíåòå Ñëåäâàù, çà äà ïðîäúëæèòå."
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Ïå÷àòàé òåêñòà êàòî PostScript ?"
-
-#~ msgid "Profile "
-#~ msgstr "Ïðîôèë "
-
-#~ msgid "Provider dns 1"
-#~ msgstr "1-âè DNS íà äîñòàâ÷èêà"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "2-ðè DNS íà äîñòàâ÷èêà"
-
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, áèáëèîòåêè, èíñòðóìåíòè"
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Ñêîðîñò íà ïðèåìàíå: "
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Ïðåíàñòðîé èçïîëçâàéêè ìàãüîñíèê ..."
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Reload"
-#~ msgstr "Ïðåçàðåæäàíå"
-
-#~ msgid "Remote queue"
-#~ msgstr "Îòäàëå÷åíî èìå íà îïàøêà"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Ëèïñâà èìå íà îïàøêàòà !"
-
-#~ msgid "Remove queue"
-#~ msgstr "Èçòðèâàíå íà îïàøêàòà"
-
-#~ msgid "Restore from file"
-#~ msgstr "Âúçñòàíîâè îò ôàéë"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Âúçñòàíîâè îò äèñêåòà"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Îáúðíè ðåäà íà ñòðàíèöèòå"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Äåñåí/Ëÿâ úãúë â òî÷êè (1/72 íà èí÷)"
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO å bootloader çà SPARC: òoé ìîæå äà ñòàðòèðà\n"
-#~ "GNU/Linux èëè êîÿ äà å äðóãà îïåðàöèîííà ñèñòåìà, ñúùåñòâóâàùà íà "
-#~ "êîìïþòúðà âè.\n"
-#~ "Îáèêíîâåííî, òåçè äðóãè îïåðàöèîííè ñèñòåìà ñå çàñè÷àò è èíñòàëèðàò\n"
-#~ "ïðàâèëíî. Àêî òîâà íå ñòàâà ïðè âàñ, ìîæåòå äà äîáàâÿòå çàïèñè íà ðúêà â\n"
-#~ "òîçè åêðàí. Ãëåäàéòå äà èçáåðåòå âåðíè ïàðàìåòðè.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ìîæå äà íå èñêàòå äà äàâàòå äîñòúï äî òåçè îïåðàöèîííè ñèñòåìè íà íèêîé,\n"
-#~ "â êîéòî ñëó÷àé ìîæåòå äà èçòðèåòå ñúîòâåòíèòå çàïèñè. Íî â òàêúâ ñëó÷àé,\n"
-#~ "ùå ñå íóæäàåòå îò boot-äèñêåòà, çà äà ãè ñòàðòèðàòå !"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Ãëàâíèòå îïöèè íà SILO ñà:\n"
-#~ "  - bootloader èíñòàëàöèÿ: ïîêàçâà, êúäåòî èñêàòå äà ïîñòàâèòå "
-#~ "èíôîðìàöèÿòà\n"
-#~ "íåîáõîäèìà çà ñòàðòèðàíåòî íà GNU/Linux. Îñâåí àêî íå çíàåòå òî÷íî êàêâî\n"
-#~ "ïðàâèòå, èçáåðåòå \"Ïúðâè ñåêòîð íà óñòðîéñòâîòî (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Èç÷àêâàíå ïðåäè ñòàðòèðàíå íà ïîäðàçáèðàùèÿ ñå îáðàç: Îïðåäåëÿ "
-#~ "äåñåòèòå\n"
-#~ "îò ñåêóíäàòà, êîèòî çàðåæäàùà ïðîãðàìà äà èç÷àêà ïðåäè ïóñêàíåòî íà "
-#~ "ïúðâèÿ\n"
-#~ "îáðàç. Ïîëåçíî å çà ñèñòåìè, êîèòî ñòàðòèðàò îò äèñêà âåäíàãà ñëåä êàòî\n"
-#~ "ñå âêëþ÷è êëàâèàòóðàòà. Çàðåæäàùàòà ïðîãðàìà íå ÷àêà, àêî \"delay\" å\n"
-#~ "ïðîïóñíàò èëè å íóëà."
-
-#~ msgid "Save in file"
-#~ msgstr "Çàïàçè âúâ ôàéë"
-
-#~ msgid "Sciences"
-#~ msgstr "Íàóêè"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Íàó÷íè ïðèëîæåíèÿ"
-
-#~ msgid "Search"
-#~ msgstr "Òúðñè"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Âòîðè DNS ñúðâúð"
-
-#~ msgid "See"
-#~ msgstr "Âèæ"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Èçáåðåòå âðúçêà êúì îòäàëå÷åíèÿ ïðèíòåð"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Èçáåðåòå ðàçìåðà, êîéòî èñêàòå äà èíñòàëèðàì"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Èçáåðåòå:\n"
-#~ "\n"
-#~ "  - Ñïåöèàëèçèðàíà: Àêî ñòå äîñòàòú÷íî çàïîçíàò ñ GNU/Linux, ùå ìîæåòå äà "
-#~ "èçáåðåòå\n"
-#~ "    ãëàâíîòî ïðåäíàçíà÷åíèå íà ìàøèíàòà ñè. Âèæòå ïî-äîëó çà "
-#~ "ïîäðîáíîñòè.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Åêñïåðòíà: Òîâà ïðåäïîëàãà, ÷å ñòå íà \"òè\" ñ GNU/Linux è èñêàòå äà\n"
-#~ "    íàïðàâèòå âèñîêî ñïåöèàëèçèðàíà èíñòàëàöèÿ. Êàêòî è â "
-#~ "\"Ñïåöèàëèçèðàíèÿ\"\n"
-#~ "    èíñòàëàöèîíåí êëàñ, ùå ìîæåòå äà èçáåðåòå óïîòðåáàòà íà ñèñòåìàòà "
-#~ "ñè.\n"
-#~ "    Íî ìîëÿ, ìîëÿ, ÍÅ ÈÇÁÈÐÀÉÒÅ ÒÎÂÀ, ÎÑÂÅÍ ÀÊÎ ÍÅ ÇÍÀÅÒÅ ÊÀÊÂÎ ÏÐÀÂÈÒÅ!"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Èçáåðåòå ãîëåìèíà %d%s"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Ñêîðîñò íà èçïðàùàíå: "
-
-#~ msgid "Show only leaves"
-#~ msgstr "Ïîêàæè ñàìî ëèñòàòà"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Ñëîâàøêà (Ïðîãðàìèñòè)"
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "Ñúæåëÿâàì, íàñòðîéêàòà íà ïîùàòà îùå íå å âúâåäåíà. Áúäåòå òúðïåëèâè."
-
-#~ msgid "Sort by"
-#~ msgstr "Ñîðòèðàé ïî"
-
-#~ msgid "Spool directory"
-#~ msgstr "Spool-äèðåêòîðèÿ"
-
-#~ msgid "Spooler: "
-#~ msgstr "Spooler: "
-
-#~ msgid "Statistics"
-#~ msgstr "Ñòàòèñòèêè"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Èçïðîáâàéòå ìèøêàòà ñè òóê."
-
-#~ msgid "Text"
-#~ msgstr "Òåêñò"
-
-#~ msgid ""
-#~ "The Mandrake Linux spreads among several CDROMs. It may be that drakX "
-#~ "has\n"
-#~ "selected packages on another CDROM than the installation CDROM, and when "
-#~ "it\n"
-#~ "needs that you put another one into the drive, it will eject the current "
-#~ "CDROM\n"
-#~ "and ask you for another one."
-#~ msgstr ""
-#~ "Mandrake Linux å ðàçïîëîæåí íà íÿêîëêî CDROM-à. Ìîæå äà ñå îêàæå, ÷å "
-#~ "DrakX\n"
-#~ "å èçáðàë ïàêåòè íà CDROM, ðàçëè÷åí îò èíñòàëàöèîííèÿ CDROM, è, êîãàòî ìó\n"
-#~ "ïîòðÿáâà äà ãî ñëîæèòå â óñòðîéñòâîòî, òîé ùå èçêàðà òåêóùèÿ CDROM è ùå "
-#~ "âè\n"
-#~ "ïîèñêà äðóã."
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Ñëåäíèòå ïàêåòè ùå áúäàò äåèíñòàëèðàíè"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Òîçè ñòàðòîâ ñêðèïò ñå îïèòâà äà çàðåäè ìîäóëè usb ìèøêàòà âè."
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Çà ïî-ñèãóðíà ñèñòåìà, òðÿáâà äà èçáåðåòå \"Èçïîëçâàé shadow ôàéë\"\n"
-#~ "è \"Èçïîëçâàé MD5 ïàðîëè\"."
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Ïðåâêëþ÷âàíå ìåæäó Èíñòàëèðàí è Íàëè÷åí"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Ãîðåí/Äîëåí úãúë â òî÷êè (1/72 íà èí÷)"
-
-#~ msgid "Tree"
-#~ msgstr "Äúðâî"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Äà ñå îïèòàì ëè äà îòêðèÿ ìîäåì ?"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL íà äèðåêòîðèÿòà ñúäúðæàùà RPM"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "Äåèíñòàëèðàì ïàêåòà"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Îïöèè çà Uniprint äðàéâåð"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Íåðàçïîçíàò íàñòðîéâàù ôàéë"
-
-#~ msgid "Update location"
-#~ msgstr "Îáíîâè ìÿñòîòî"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Îáíîâÿâàíå íà RPM áàçàòà"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Èçïîëçâàé MD5 ïàðîëè"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Èçïîëçâàé diskdrake"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "Èñêàòå ëè îïòèìèçàöèÿ íà äèñêîâåòå ?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Èçïîëçâàé shadow ôàéë"
-
-#~ msgid "Wait"
-#~ msgstr "Åäèí ìîìåíò"
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "Äîáðå äîøëè â Ìàãüîñíèêà çà ìðåæîâà íàñòðîéêà.\n"
-#~ "Êîè êîìïîíåíòè èñêàòå äà íàñòðîèòå ?\n"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Êàêâî òúðñÿò?"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Çà êàêâî ñå óïîòðåáÿâà ñèñòåìàòà âè ?"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Êàêâà ïðîãðàìà çà íà÷àëíî çàðåæäàíå èñêàòå äà èçïîëçâàòå?"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Êîé ôàéë òúðñèòå?"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Êîé ïàêåò òúðñÿò"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Êúì êîé ñåðèåí ïîðò å ñâúðçàíà ìèøêàòà âè ?"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Ñ îòäàëå÷åí CUPS ñúðâúð, íå âè ñå íàëàãà äà íàñòðîéâàòå êàêúâòî\n"
-#~ "è äà áèëî ïðèíòåð òóê; ïðèíòåðèòå ñàìè ùå áúäàò çàñå÷åíè,\n"
-#~ "îñâåí àêî íÿìàòå ñúðâúð íà äðóãà ìðåæà; â ïîñëåäíèÿ ñëó÷àé,\n"
-#~ "ùå òðÿáâà äà ïðåäîñòàâèòå IP àäðåñ è åâåíòóàëíî ïîðò íà\n"
-#~ "CUPS ñúðâúðà."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Çàïèøè /etc/fstab"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Äà, îòïå÷àòàé ASCII òåñòîâà ñòðàíèöà"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Äà, îòïå÷àòàé PostScript òåñòîâà ñòðàíèöà"
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Ìîæåòå äà èçáåðåòå íèâî íà ñèãóðíîñò íà ñèñòåìàòà ñè. Ìîëÿ, îáúðíåòå ñå "
-#~ "êúì ðúêîâîäñòâîòî çà\n"
-#~ "èíôîðìàöèÿ. Íàêðàòêî, àêî íå çíàåòå êàêâî äà èçáåðåòå, îñòàâåòå òîâà ïî "
-#~ "ïîäðàçáèðàíå.\n"
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Ìîæåòå äà íàñòðîèòå ëîêàëåí ïðèíòåð (ñâúðçàí êúì ìàøèíàòà âè) èëè "
-#~ "îòäàëå÷åí\n"
-#~ "ïðèíòåð (äîñòúïåí ÷ðåç Unix, Netware èëè Microsoft Windows ìðåæà)."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Ìîæåòå äà èíñòàëèðàòå êðèïòîãðàôñêè ïàêåòè, àêî Èíòåðíåò âðúçêàòà âè å\n"
-#~ "íàòðîåíà êàêòî òðÿáâà. Ïúðâî èçáåðåòå îãëåäàëåí ñàéò, îò êúäåòî èçêàòå äà "
-#~ "èçòåãëÿòå\n"
-#~ "ïàêåòè, ñëåä òîâà ìàðêèðàéòå ïàêåòèòå çà èíñòàëèðàíå.\n"
-#~ "\n"
-#~ "\n"
-#~ "Îòáåëåæåòå, ÷å òðÿáâà äà èçáåðåòå îãëåäàëåí ñàéò è êðèïòîãðàôñêè ïàêåòè,\n"
-#~ "ñúîáðàçíî âàøåòî çàêîíîäàòåëñòâî."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà èçáåðåòå ïîîòäåëíî âñè÷êè ïàêåòè, êîèòî\n"
-#~ "èñêàòå äà èíñòàëèðàòå.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ìîæåòå äà ðàçøèðèòå èëè ñâèåòå äúðâîòî, êàòî öúêíåòå íà îïöèèòå â ëåâèÿ "
-#~ "úãúë\n"
-#~ "íà ïðîçîðåöà ñ ïàêåòèòå.\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî ïðåäïî÷èòàòå äà âèäèòå ïàêåòèòå ïîäðåäåíè â àçáó÷åí ðåä, öúêíåòå íà\n"
-#~ "èêîíàòà \"Ïðåâêëþ÷âàíå ìåæäó íåñîðòèðàíè è ñîðòèðàíè ïî ãðóïè\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî íå èñêàòå äà áúäåòå ïðåäóïðåæäàâàíè çà çàâèñèìîñòè, öúêíåòå "
-#~ "\"Àâòîìàòè÷íè çàâèñèìîñòè\".\n"
-#~ "Àêî íàïðàâèòå òîâà, îòáåëåæåòå ÷å èçêëþ÷âàíåòî íà åäèí ïàêåò ìîæå "
-#~ "òèõîìúëêîì\n"
-#~ "äà èçêëþ÷è íÿêîè äðóãè ïàêåòè, êîèòî çàâèñÿò îò íåãî."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà âúâåäåòå root ïàðîëàòà íà Mandrake Linux ñèñòåìàòà.\n"
-#~ "Ïàðîëàòà òðÿáâà äà áúäå âúâåäåäà äâà ïúòè çà ïðîâåðêà, ÷å ïàðîëèòå ñà "
-#~ "èäåíòè÷íè.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root å ñèñòåìíèÿò àäìèíèñòðàòîð èëè åäèíñòâåíèÿ ïîòðåáèòåë, íà êîéòî å "
-#~ "ïîçâîëåíî\n"
-#~ "äà ïîïðàâÿ íàñòðîéâàùèòå ôàéëîâå. Çàòîâà èçáåðåòå ïàðîëàòà âíèìàòåëíî.\n"
-#~ "Íåïîçâîëåíà óïîòðåáà íà root àêàóíòà ìîæå äà áúäå èçêëêþ÷èòåëíî îïàñíî çà "
-#~ "öåëîñòòà\n"
-#~ "íà ñèñòåìàòà, äàííèòå è è äðóãèòå ñèñòåìè ñâúðçàíè êúì íåÿ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ïàðîëàòà òðÿáâà äà å ñìåñèöà îò àçáó÷íè ñèìâîëè è äà å äúëãà íàé-ìàëêî 8\n"
-#~ "ñèìâîëà. Íèêîãà íå òðÿáâà äà ñè ÿ çàïèñâàòå.\n"
-#~ "\n"
-#~ "\n"
-#~ "Íå ïðàâåòå ïàðîëàòà ïðåêàëåíî äúëãà èëè ñëîæíà, âúïðåêè òîâà: òðÿáâà äà "
-#~ "ìîæåòå\n"
-#~ "äà ÿ çàïîìíèòå áåç ìíîãî óñèëèÿ."
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà èçáåðåòå íÿêîè äîïúëíèòåëíè îïöèè çà ñèñòåìàòà ñè.\n"
-#~ "\n"
-#~ "* Èçïîëçâàíå îïòèìèçàöèè çà òâúðäèÿ äèñê: òàçè îïöèÿ ìîæå äà ïîäîáðè "
-#~ "ðàáîòàòà íà òâúðäèÿ âè äèñêà, íî å ñàìî çà íàïðåäíàëè\n"
-#~ "  ïîòåðåáèòåëè: íÿêîè íåäîäÿëàíè ÷èïñåòè ìîãàò äà ñúñèïÿò äàííèòå âè, "
-#~ "òàêà ÷å âíèìàâàéòå. Îòáåëåæåòå, ÷å ÿäðîòî èìà\n"
-#~ "  âãðàäåí ÷åðåí ñïèñúê îò óñòðîéñòâà è ÷èïñåòè, íî, àêî èñêàòå äà "
-#~ "èçáåãíåòå ëîøè èçíåíàäè, îñòàâåòå òàçè îïöèÿ èçêëþ÷åíà.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Èçáåðåòå íèâî íà ñèãóðíîñò: ìîæåòå äà èçáåðåòå íèâî íà ñèãóðíîñò çà "
-#~ "ñèñòåìàòà\n"
-#~ "  ñè. Ìîëÿ, îáúðíåòå ñå êúì ðúêîâîäñòâîòî çà ïúëíà èíôîðìàöèÿ. Ïðîñòî, "
-#~ "àêî\n"
-#~ "  íå çíàåòå êàêâî äà èçáåðåòå, îñòàâåòå òîâà ïî ïîäðàçáèðàíå.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Òî÷íî RAM, àêî å íóæíî: çà ñúæàëåíèå, íÿìà ñòàíäàðòåí ìåòîä, äà ñå "
-#~ "ïîïèòà BIOS çà îáåìà íà RAM â êîìïþòúðà. Êàòî\n"
-#~ "  ïîñëåäñòâèå, GNU/Linux ìîæå äà íå óñïåå äà çàñå÷å ïðàâèëíî îáåìà íà "
-#~ "RAM. Àêî å òàêúâ ñëó÷àÿ, òóê ìîæåòå äà\n"
-#~ "  çàäàäåòå òî÷íèÿ îáåì íà RAM. Ìîëÿ, îòáåëåæåòå ÷å îò 2 èëè 4 MB ìåæäó "
-#~ "çàñå÷åíàòà è ïðèñúñòâàùàòà RAM å íîðìàëíà.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Àâòîìàòè÷íî ìîíòèðàíå íà ïðåíîñèìè óñòðîéñòâà: àêî ïðåäïî÷èòàòå äà íå "
-#~ "ìîíòèðàòå ðú÷íî ïðåíîñèìè óñòðîéñòâà (CD-ROM,\n"
-#~ "  ôëîïè, Zip è ò.í.) ïèøåéêè \"mount\" è \"umount\", èçáåðåòå òàçè "
-#~ "îïöèÿ.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Ïî÷èñòâàíå íà \"/tmp\" ïðè çàðåæäàíå: àêî èñêàòå äà ñå èçòðèâàò âñè÷êè "
-#~ "ôàéëîâå è äèðåêòîðèè ñúõðàíÿâàíè â \"/tmp\",\n"
-#~ "  êîãàòî çàðåæäàòå ñèñòåìàòà ñè, èçáåðåòå òàçè îïöèÿ.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Âêëþ÷âàíå íà NumLock ïðè çàðåæäàíå: àêî èñêàòå äà ñå âêëþ÷âà NumLock "
-#~ "ïðè ñòàðòèðàíå, èçáåðåòå òàçè îïöèÿ. Ìîëÿ, îòáåëåæåòå ÷å\n"
-#~ "  íå òðÿáâà äà âêëþ÷âàòå òàçè îïöèÿ ïðè ëàïòîïè è ÷å ìîæå è äà íå ðàáîòè "
-#~ "ïîä X)."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Ñåãà ìîæåòå äà ïîñî÷èòå âðåìåâàòà çîíà ñïðÿìî ìåñòîæèâååíåòî ñè."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà èçïðîáâàòå ìèøêàòà ñè. Èçïîëçâàéòå áóòîíà è òîï÷åòî, çà "
-#~ "äà\n"
-#~ "ïðîâåðèòå äàëè íàñòðîéêèòå ñà íàðåä. Àêî íå, ìîæåòå äà öúêíåòå \"Îòìÿíà"
-#~ "\",\n"
-#~ "çà äà èçáåðåòå äðóã äðàéâåð."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà èçïðîáâàòå ìèøêàòà ñè. Èçïîëçâàéòå áóòîíèòå è êîëåëöåòî, "
-#~ "çà\n"
-#~ "äà ïðîâåðèäà äàëè íàñòðîéêèòå ñà íàðåä. Àêî íå ñà, öúêíåòå íà \"Îòêàç\", "
-#~ "çà\n"
-#~ "äà èçáåðåòå äðóã äðàéâåð.\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî èíñòàëèðàòå íà Apple ìàøèíà ñ åäíîáóòîííà ìèøêà, ùå èìàòå âúçìîæíîñò "
-#~ "äà\n"
-#~ "îïðåäåëèòå êëàâèøè îò êëàâèàòóðàòà, äà ñèìóëèðàò 2-ðè è 3-òè áóòîí íà\n"
-#~ "ìèøêàòà. Òîâà ùå âè äàäå äîñòúï äî ïúëíàòà ôóíêöèîíàëíîñò íà ìèøêàòà â "
-#~ "Linux\n"
-#~ "êîíçîëàòà, è â X Windows GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî èìàòå ADB ìèøêà, ìîëÿ, èçáåðåòå USB, òúé êàòî Linux ÿäðîòî ùå ñå "
-#~ "ïîãðèæè\n"
-#~ "äà èçïîëçâà ìèøêàòà êàêòî òðÿáâà."
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Ìîæåòå äà îïðåäåëèòå íàïðàâî URI çà äîñòúï äî ïðèíòåðà ñ CUPS."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà íàñòðîèòå ìðåæîâîòî ñè óñòðîéñòâî.\n"
-#~ "\n"
-#~ "  * IP àäðåñ: àêî íå çíàåòå èëè íå ñòå ñèãóðíè êàêâî äà âúâåäåòå, "
-#~ "ïîïèòàéòå ìðåæîâèå ñè àäìèíèñòðàòîð.\n"
-#~ "    Íå òðÿáâà äà âúâåæäàòå IP àäðåñ, àêî èçáåðåòå îïöèÿòà \"Àâòîìàòè÷íî IP"
-#~ "\", ïî-äîëó.\n"
-#~ "\n"
-#~ "  * Ìðåæîâà ìàñêà: \"255.255.255.0\" îáèêíîâåííî å äîáúð èçáîð. Àêî íå "
-#~ "çíàåòå èëè íå ñòå ñèãóðíè êàêâî äà âúâåäåòå, ïîïèòàéòå ìðåæîâèÿ ñè "
-#~ "àäìèíèñòðàòîð.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * Àâòîìàòè÷íî IP: Àêî ìðåæàòà âè èçïîëçâà BOOTP èëè DHCP ïðîòîêîë, "
-#~ "èçáåðåòå òàçè îïöèÿ. Àêî å èçáåðàíà, íå ñå íóæäàåòå\n"
-#~ "    îò ñòîéíîñò çà \"IP àäðåñ\". Àêî íå çíàåòå èëè íå ñòå ñèãóðíè êàêâî "
-#~ "òðÿáâà äà âúâåäåòå, ïîïèòàéòå ìðåæîâèÿ ñè àäìèíèñòðàòîð."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà ñúçäàäåòå åäèí èëè ïîâå÷å \"îáèêíîâåíè\" ïîòðåáèòåëñêè\n"
-#~ "àêàóíòè, êàòî ïðîòèâîïîëîæíîñò íà \"ïðèâèëåãèðîâàíèÿ\" ïîòðåáèòåëñêè\n"
-#~ "àêàóíò \"root\". Ìîæåòå äà ñúçäàäåòå ïî åäèí èëè ïîâå÷å çà âñåêè, êîéòî\n"
-#~ "áèõòå èñêàëè äà ïîëçâà êîìïþòúðà âè. Îòáåëåæåòå ÷å âñåêè àêàóíò ùå èìà\n"
-#~ "ñâîèòå ïðåäïî÷èòàíèÿ (ãðàôè÷íà ñðåäà, ïðîãðàìíè íàñòðîéêè è ò.í.)\n"
-#~ "è äà íàñòðîè ñâîÿòà \"Home\" äèðåêòîðèÿ, êúäåòî äà çàïèñâà òåçè\n"
-#~ "ñâîè ïðåäïî÷èòàíèÿ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ïúðâî ñúçäàéòå àêàóíò çà ñåáå ñè. Äàæå è äà ñòå åäèíñòâåíèÿò ïîòðåáèòåë,\n"
-#~ "èçïîëçâàíåòî íà àäìèíèñòðàòîðñêèÿ àêàóíò çà âñåêèäíåâíà óïîòðåáà å "
-#~ "îïàñíî.\n"
-#~ "\n"
-#~ "\n"
-#~ "Çàòîâà âëèçàéòå ñ ïîòðåáèòåëñêèÿ ñè àêàóíò â ñèñòåìàòà è, ñàìî àêî âè ñå\n"
-#~ "íàëîæè, èçïîëçâàéòå àäìèíèñòðàòîðñêèÿ àêàóíò."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà âúâåäåòå dialup îïöèèòå. Àêî íå çíàåòå\n"
-#~ "èëè íå ñòå ñèãóðíè êàêâî äà âúâåäåòå, ïîäõîäÿùà èíôîðìàöèÿ ìîæå äà áúäå "
-#~ "âçåòà\n"
-#~ "îò Èíòåðíåò äîñòàâ÷èêà âè. Àêî íå âúâåäåòå èíôîðìàöèÿ çà DNS (name "
-#~ "server)\n"
-#~ "òóê, òàçè èíôîðìàöèÿ ùå áúäå âçåòà Èíòåðíåò äîñòàâ÷èêà âè ïî âðåìå íà\n"
-#~ "ñâúðçâàíå."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà âúâåäåòå îïöèèòå çà íàáèðàíå. Àêî íå ñòå ñèãóðíè,\n"
-#~ "ïðàâèëíà èíôîðìàöèÿ ìîæåòå äà ïîëó÷èòå îò Èíòåðíåò äîñòàâ÷èêà ñè."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà âúâåäåòå èìåòî íà õîñòà ñè. Àêî íå çíàåòå\n"
-#~ "èëè íå ñòå ñèãóðíè êàêâî äà âúâåäåòå, ïîïèòàéòå ìðåæîâèÿ ñè àäìèíèñòðàòîð."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà âúâåäåòå èìåòî íà õîñòà ñè, àêî òðÿáâà. Àêî\n"
-#~ "íå çíàåòå èëè íå ñòå ñèãóðíè êàêâî äà âúâåäåòå, îñòàâåòå ãî ïðàçíî."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà âúâåäåòå èìåòî íà õîñòà ñè, àêî âè òðÿáâà. Àêî íå\n"
-#~ "çíàåòå èëè íå ñòå ñèãóðíè êàêâî òðÿáâà äà âúâåäåòå, ñ ïðàâèëíà "
-#~ "èíôîðìàöèÿ\n"
-#~ "ìîæåòå äà ñå ñäîáèåòå îò Èíòåðíåò äîñòàâ÷èêà ñè."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå ñà ìàðêèðàòå ãðóïà ïàêåòè, êîÿòî èñêàòå äà\n"
-#~ "èíñòàëèðàòå èëè îáíîâèòå.\n"
-#~ "\n"
-#~ "DrakX ùå ïðîâåðè äàëè èìàòå äîñòàòú÷íî ìÿñòî çà èíñòàëèðàíåòî èì. Àêî "
-#~ "íÿìàòå,\n"
-#~ "òîé ùå âè ïðåäóïðåäè çà òîâà. Àêî èñêàòå äà ïðîäúëæèòå âúïðåêè òîâà, ùå "
-#~ "ïðîäúëæè\n"
-#~ "èíñòàëàöèÿòà íà âñè÷êè ìàðêèðàíè ãðóïè, íî ùå ïðîïóñíå ïî-ìàëîâàæíèòå "
-#~ "ïàêåòè.\n"
-#~ "Â äúíîòî íà ñïèñúêà ìîæåòå äà ìàðêèðàòå îïöèÿòà \"Èíäèâèäóàëåí èçáîð íà "
-#~ "ïàêåòè\";\n"
-#~ "â òîçè ñëó÷àé, ùå òðÿáâà äà îáõîäèòå ïîâå÷å îò 1000 ïàêåòà ..."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "\t* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "\t  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "\t  will then have a complete collection of software installed in order "
-#~ "to compile, debug and format source code,\n"
-#~ "\t  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "\t  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "\t  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Ñåãà òðÿáâà äà îïðåäåëèòå ïðåäíàçíà÷åíèåòî íà ìàøèíàòà ñè. Âúçìîæíîñòèòå "
-#~ "ñà:\n"
-#~ "\n"
-#~ "\t* Ðàáîòíà ñòàíöèÿ: òîâà å èäåàëíèÿ èçáîð, àêî âúçíàìåðÿâàòå äà "
-#~ "èçïîëçâàòå ìàøèíàòà ñè ãëàâíî çà åæåäíåâíà óïîòðåáà â\n"
-#~ "\t  îôèñà èëè ó äîìà.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Ðàçðàáîòêà: àêî âúçíàìåðÿâàòå äà èçïîëçâàòå ìàøèíàòà ñè ãëàâíî çà "
-#~ "ðàçðàáîòêà íà ñîôóåð, òîâà å äîáúð èçáîð.\n"
-#~ "\t  Òîãàâà ùå èìàòå èíñòàëèðàí ïúëåí íàáîð îò ñîôòóåð, çà äà êîìïèëèðàòå, "
-#~ "îòêðèâàòå áúãîâå è ôîðìàòèðàòå èçõîäåí êîä,\n"
-#~ "\t  èëè äà ñúçäàâàòå ñîôóåðíè ïàêåòè.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Ñúðâúð: àêî âúçíàìåðÿâàòå äà èçïîëçâàòå òàçè ìàøèíà çà ñúðâúð, òîâà å "
-#~ "äîáðèÿò èçáîð. Âêëþ÷âà ôàéëîâ ñúðâúð\n"
-#~ "\t  (NFS èëè SMB), ñúðâúð çà ïå÷àò (Unix-ñêè èëè Microsoft Windows-ñêè), "
-#~ "ñúðâúð çà àóòîðèçàöèÿ (NIS), ñúðâúð çà\n"
-#~ "\t  áàçè-äàííè è ò.í.. Êàòî òàêúâ, íå î÷àêâàéòå èíñòàëèðàíè êàêâèòî è äà "
-#~ "å øàðèíèè (KDE, GNOME, è ò.í.)."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Ñåãà òðÿáâà äà îïðåäåëèòå ïðåäíàçíà÷åíèåòî íà ìàøèíàòà ñè. Âúçìîæíîñòèòå "
-#~ "ñà:\n"
-#~ "\n"
-#~ "* Ðàáîòíà ñòàíöèÿ: òîâà å èäåàëíèÿ èçáîð, àêî âúçíàìåðÿâàòå äà èçïîëçâàòå "
-#~ "ìàøèíàòà ñè ãëàâíî çà åæåäíåâíà óïîòðåáà â\n"
-#~ "  îôèñà èëè ó äîìà.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Ðàçðàáîòêà: àêî âúçíàìåðÿâàòå äà èçïîëçâàòå ìàøèíàòà ñè ãëàâíî çà "
-#~ "ðàçðàáîòêà íà ñîôóåð, òîâà å äîáúð èçáîð.\n"
-#~ "  Òîãàâà ùå èìàòå èíñòàëèðàí ïúëåí íàáîð îò ñîôòóåð, çà äà êîìïèëèðàòå, "
-#~ "îòêðèâàòå áúãîâå è ôîðìàòèðàòå èçõîäåí êîä,\n"
-#~ "  èëè äà ñúçäàâàòå ñîôóåðíè ïàêåòè.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Ñúðâúð: àêî âúçíàìåðÿâàòå äà èçïîëçâàòå òàçè ìàøèíà çà ñúðâúð, òîâà å "
-#~ "äîáðèÿò èçáîð. Âêëþ÷âà ôàéëîâ ñúðâúð\n"
-#~ "  (NFS èëè SMB), ñúðâúð çà ïå÷àò (Unix-ñêè èëè Microsoft Windows-ñêè), "
-#~ "ñúðâúð çà àóòîðèçàöèÿ (NIS), ñúðâúð çà\n"
-#~ "  áàçè-äàííè è ò.í.. Êàòî òàêúâ, íå î÷àêâàéòå èíñòàëèðàíè êàêâèòî è äà å "
-#~ "øàðèíèè (KDE, GNOME, è ò.í.)."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Ñåãà ìîæåòå äà èçáåðåòå ïðèíòåð îò ñïèñúêà ïî-ãîðå."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Òðÿáâà äà ïðèåìåòå óñëîâèÿòà íà ëèöåíçà ïî-ãîðå, çà äà ïðîäúëæè "
-#~ "èíñòàëàöèÿòà.\n"
-#~ "\n"
-#~ "\n"
-#~ "Öúêíåòå \"Ïðèåìè\", àêî ñòå ñúãëàñíè ñ óñëîâèÿòà ìó.\n"
-#~ "\n"
-#~ "\n"
-#~ "Öúêíåòå \"Îòêàæè\", àêî íå ñòå ñúãëàñíè ñ óñëîâèÿòà ìó. Èíñòàëàöèÿòà ùå "
-#~ "ïðèêëþ÷è áåç ïðîìÿíà íà íàñòîÿùàòà\n"
-#~ "íàñòðîéêà."
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Òðÿáâà äà âúâåäåòå íÿêàêâà èíôîðìàöèÿ òóê.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Èìå íà ïðèíòåð: ïî ïîäðàçáèðàíå, ïå÷àòíèÿ spooler èçïîëçâà \"lp\" "
-#~ "êàòî èìå íà ïðèíòåð. Òàêà ÷å òðÿáâà äà èìàòå\n"
-#~ "ïðèíòåð íàðå÷åí \"lp\".\n"
-#~ "     Àêî èìàòå ñàìî åäèí ïðèíòåð, ìîæåòå äà èçïîëçâàòå íÿêîëêî èìåíà çà "
-#~ "íåãî. Ïðîñòî òðÿáâà äà ãè îòäåëèòå ñ pipe\n"
-#~ "     ñèìâîëà (\"|\"). Òàêà ÷å, àêî ïðåäïî÷èòàòå ïî-ñìèñëåíî èìå, ìîæåòå "
-#~ "äà ãî ñëîæèòå ïúðâî, íàïð. \"My printer|lp\".\n"
-#~ "     Ïðèíòåðúò ñúäúðæàù \"lp\" â èìåòî(àòà) ñè, ùå ñå ïîëçâà ïî "
-#~ "ïîäðàçáèðàíå.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Spool äèðåêòîðèÿ: òîâà å äèðåêòîðèÿòà, êúäåòî ñå ñúõðàíÿâàò ðàáîòèòå "
-#~ "çà ïå÷àò. Îñòàâåòå ñòîéíîñòòà\n"
-#~ "      ïî ïîäðàçáèðàíå, îñâåí àêî íå çíàåòå êàêâî äà èçïîëçâàòå\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Âðúçêà êúì ïðèíòåð: Àêî ïðèíòåðúò âè å ôèçè÷åñêè ñâúðçàí êúì "
-#~ "êîìïþòúðà âè, èçáåðåòå \"Ëîêàëåí ïðèíòåð\".\n"
-#~ "     Àêî èñêàòå äîñòúï äî ïðèíòåð íàìèðàù ñå íà îòäàëå÷åíà Unix ìàøèíà, "
-#~ "èçáåðåòå \"Îòäàëå÷åí LPD ïðèíòåð\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Àêî èñêàòå äîñòúï äî ïðèíòåð íàìèðàù ñå íà îòäàëå÷åíà Microsoft "
-#~ "Windows ìàøèíà (èëè íà Unix ìàøèíà ïîëçâàùà SMB\n"
-#~ "     ïðîòîêîë), èçáåðåòå \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Àêî èñêàòå äîñòúï äî ïðèíòåð íàìèðàù ñå íà NetWare ìðåæà, èçáåðåòå "
-#~ "\"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Ïðèíòåðúò âè áåøå çàñå÷åí. Ìîëÿ, âúâåäåòå èìåòî íà óñòðîéñòâîòî, íà "
-#~ "êîåòî\n"
-#~ "å ñâúðçàí.\n"
-#~ "\n"
-#~ "\n"
-#~ "Çà èíôîðìàöèÿ, ïîâå÷åòî ïðèíòåðè ñà ñâúðçàíè íà ïúðâèÿ ïàðàëåëåí ïîðò. "
-#~ "Òîçè\n"
-#~ "ñå íàðè÷à \"/dev/lp0\" ïîä GNU/Linux è \"LPT1\" ïîä Microsoft Windows."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Ñèñòåìàòà âè ùå ñå ðåñòàðòèðà.\n"
-#~ "\n"
-#~ "Ñëåä êàòî ðåñòàðòèðà, âàøàòà íîâà Mandrake Linux ñèñòåìà ùå ñå çàðåäè\n"
-#~ "àâòîìàòè÷íî. Àêî èñêàòå äà ïóñíåòå äðóãà ñúùåñòâóâàùà îïåðàöèîííà "
-#~ "ñèñòåìà,\n"
-#~ "ïðî÷åòåòå äîïúëíèòåëíèòå èíñòðóêöèè."
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "âñè÷êè äàííè âúðõó òÿõ ùå áúäàò çàãóáåíè"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "âíèìàíèå: Â ÒÎÂÀ ÍÈÂÎ ÍÀ ÑÈÃÓÐÍÎÑÒ, ROOT ÂËÈÇÀÍÅÒÎ ÍÀ ÊÎÍÇÎËÀÒÀ ÍÅ Å "
-#~ "ÏÎÇÂÎËÅÍÎ !\n"
-#~ "Àêî èñêàòå äà ñòå root, òðÿáâà äà âëåçåòå êàòî ïîòðåáèòåë è òîãàâà äà "
-#~ "èçïîëçâàòå \"su\".\n"
-#~ "Êàòî öÿëî, íå î÷àêâàéòå äà èçïîëçâàòå ìàøèíàòà ñè çà íåùî äðóãî, îñâåí çà "
-#~ "ñúðâúð.Áÿõòå ïðåäóïðåäåí."
-
-#~ msgid "cannot fork: "
-#~ msgstr "íå ìîãà äà ñå îòäåëÿ: "
-
-#~ msgid "default"
-#~ msgstr "ïî ïîäðàçáèðàíå"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "íå èçïîëçâàé PPPOE"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "Õîðèçîíòàëíà äîáðå-èçãëåæäàùà aurora"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (âàæåí)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (äîáúð)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (ìíîãî äîáúð)"
-
-#~ msgid "interesting"
-#~ msgstr "èíòåðåñåí"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "mandatory"
-#~ msgstr "çàäúëæèòåëåí"
-
-#~ msgid "not connected"
-#~ msgstr "íå ñâúðçàí"
-
-#~ msgid "received: "
-#~ msgstr "ïîëó÷åíè: "
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake å â ðåæèì íà ``ìàëêî ïàìåò''.\n"
-#~ "Ùå ïóñíà îòíîâî rpmdrake, çà äà ðàçðåøà òúðñåíåòî íà ôàéëîâå"
-
-#~ msgid "sent: "
-#~ msgstr "èçïðàòåíè: "
-
-#~ msgid "shadow"
-#~ msgstr "shadow"
-
-#~ msgid "start it"
-#~ msgstr "ñòàðòèðàé ãî"
-
-#~ msgid "using module"
-#~ msgstr "èçïîëçâàíå íà ìîäóë"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "Îáèêíîâåíà âåðòèêàëíà aurora"
-
-#~ msgid "yellow pages"
-#~ msgstr "æúëòè ñòðàíèöè"
diff --git a/perl-install/share/po/br.po b/perl-install/share/po/br.po
deleted file mode 100644
index e54c49bdb..000000000
--- a/perl-install/share/po/br.po
+++ /dev/null
@@ -1,8684 +0,0 @@
-# DrakX e Brezhoneg.
-# Copyright (C) 1999-2000 MandrakeSoft
-# Thierry Vignaud <tvignaud@mandrakesoft.com>, 1999-2000
-# Jañ-Mai Drapier <jan-mai.drapier@mail.dotcom.fr>, 1999-2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-06-02 17:16+0200\n"
-"PO-Revision-Date: 1999-12-30 15:29+0100\n"
-"Last-Translator: Jañ-Mai Drapier <jan-mai.drapier@mail.dotcom.fr>\n"
-"Language-Team: Brezhoneg <ofisk@wanadoo.fr>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Configure all heads independantly"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:233
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:236
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:239
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "o lenn ar c'hefluniadur"
-
-#: ../../Xconfigurator.pm_.c:240
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Graphic card"
-msgstr "Kartenn c'hrafek"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Select a graphic card"
-msgstr "Diuzit ur gartenn c'hrafek"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "Choose a X server"
-msgstr "Dibabit ur servijer X"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "X server"
-msgstr "servijer X"
-
-#: ../../Xconfigurator.pm_.c:309 ../../Xconfigurator.pm_.c:316
-#: ../../Xconfigurator.pm_.c:366
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:312
-#, fuzzy
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Pe seurt enmont a vennit ouzhpennañ"
-
-#: ../../Xconfigurator.pm_.c:324
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:326 ../../Xconfigurator.pm_.c:359
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:328 ../../Xconfigurator.pm_.c:361
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:336 ../../Xconfigurator.pm_.c:350
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:338 ../../Xconfigurator.pm_.c:352
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:371
-#, fuzzy
-msgid "XFree configuration"
-msgstr "Kefluniadur goude staliañ"
-
-#: ../../Xconfigurator.pm_.c:416
-msgid "Select the memory size of your graphic card"
-msgstr "Diuzit ment memor ho kartenn c'hrafek"
-
-#: ../../Xconfigurator.pm_.c:463
-msgid "Choose options for server"
-msgstr "Dibabit dibarzhoù ar servijer"
-
-#: ../../Xconfigurator.pm_.c:480
-msgid "Choose a monitor"
-msgstr "Dibabit ur skramm"
-
-#: ../../Xconfigurator.pm_.c:480
-msgid "Monitor"
-msgstr "Skramm"
-
-#: ../../Xconfigurator.pm_.c:483
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"An div arventenn dreistpouezus a zo ar feur freskaat a-serzh, da lavaret eo "
-"ar\n"
-"feur ma vez freskaet ar skramm a-bezh, ha pouezusuc'h c'hoazh ar feur "
-"kempredañ\n"
-"a-led, da lavaret eo ar feur ma vez diskwelet linennoù skubañ.\n"
-"\n"
-"HOLLBOUEZHUS eo deoc'h na spisaat ur seurt skramm gant ur feur kempredañ\n"
-"a zo en tu-hont da varregezh ho skramm : gallout a rafe gwastañ ho skramm\n"
-" M'hoc'h eus douetañs, dibabit ur c'hefluniadur fur."
-
-#: ../../Xconfigurator.pm_.c:490
-msgid "Horizontal refresh rate"
-msgstr "Feur freskaat a-led"
-
-#: ../../Xconfigurator.pm_.c:491
-msgid "Vertical refresh rate"
-msgstr "Feur freskaat a-serzh"
-
-#: ../../Xconfigurator.pm_.c:528
-msgid "Monitor not configured"
-msgstr "Skramm ket kefluniet"
-
-#: ../../Xconfigurator.pm_.c:531
-msgid "Graphic card not configured yet"
-msgstr "Kartenn c'hrafek ket kefluniet c'hoazh"
-
-#: ../../Xconfigurator.pm_.c:534
-msgid "Resolutions not chosen yet"
-msgstr "Spisterioù ket dibabet c'hoazh"
-
-#: ../../Xconfigurator.pm_.c:551
-msgid "Do you want to test the configuration?"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: ../../Xconfigurator.pm_.c:555
-#, fuzzy
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Da ziwall : arvarus eo amprouiñ ar gartenn c'hrafek-mañ"
-
-#: ../../Xconfigurator.pm_.c:558
-msgid "Test of the configuration"
-msgstr "Amprouiñ ar c'hefluniadur"
-
-#: ../../Xconfigurator.pm_.c:597
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"klaskit kemmañ arventennoù 'zo"
-
-#: ../../Xconfigurator.pm_.c:597
-msgid "An error has occurred:"
-msgstr "C'hoarvezet eo ur fazi :"
-
-#: ../../Xconfigurator.pm_.c:619
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Kuitaat e %d eilenn"
-
-#: ../../Xconfigurator.pm_.c:630
-msgid "Is this the correct setting?"
-msgstr "Ha reizh eo ar c'hefluniadur ?"
-
-#: ../../Xconfigurator.pm_.c:638
-msgid "An error has occurred, try to change some parameters"
-msgstr "C'hoarvezet eo ur fazi, klaskit kemmañ arventennoù 'zo"
-
-#: ../../Xconfigurator.pm_.c:684 ../../printerdrake.pm_.c:277
-#: ../../services.pm_.c:125
-msgid "Resolution"
-msgstr "Spister"
-
-#: ../../Xconfigurator.pm_.c:731
-msgid "Choose the resolution and the color depth"
-msgstr "Dibabit ar spister ha donder al livioù"
-
-#: ../../Xconfigurator.pm_.c:733
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Kartenn c'hrafek : %s"
-
-#: ../../Xconfigurator.pm_.c:734
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Servijer XFree86 : %s"
-
-#: ../../Xconfigurator.pm_.c:750 ../../standalone/draknet_.c:280
-#: ../../standalone/draknet_.c:283
-#, fuzzy
-msgid "Expert Mode"
-msgstr "Mailh"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "Show all"
-msgstr "Diskouez pep tra"
-
-#: ../../Xconfigurator.pm_.c:794
-msgid "Resolutions"
-msgstr "Spisterioù"
-
-#: ../../Xconfigurator.pm_.c:1330
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Reizhadur ar stokellaoueg : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1331
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Seurt logodenn : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1332
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Trobarzhell al logodenn : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1333
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Skramm : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1334
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "KempredA-led ar skramm : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1335
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "FreskA-serzh ar skramm : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1336
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Kartenn c'hrafek : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1337
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memor c'hrafek : %s ko\n"
-
-#: ../../Xconfigurator.pm_.c:1339
-#, fuzzy, c-format
-msgid "Color depth: %s\n"
-msgstr "Dibarzhoù donder liv"
-
-#: ../../Xconfigurator.pm_.c:1340
-#, fuzzy, c-format
-msgid "Resolution: %s\n"
-msgstr "Spisterioù"
-
-#: ../../Xconfigurator.pm_.c:1342
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servijer XFree86 : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1343
-#, fuzzy, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Servijer XFree86 : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1362
-msgid "Preparing X-Window configuration"
-msgstr "O prientiñ kefluniadur X-Window"
-
-#: ../../Xconfigurator.pm_.c:1382
-msgid "What do you want to do?"
-msgstr "Petra a vennit ober ? "
-
-#: ../../Xconfigurator.pm_.c:1387
-msgid "Change Monitor"
-msgstr "Kemmañ ar skramm"
-
-#: ../../Xconfigurator.pm_.c:1388
-msgid "Change Graphic card"
-msgstr "Kemmañ ar gartenn c'hrafek"
-
-#: ../../Xconfigurator.pm_.c:1390
-msgid "Change Server options"
-msgstr "Kemmañ dibarzhoù ar servijer"
-
-#: ../../Xconfigurator.pm_.c:1391
-msgid "Change Resolution"
-msgstr "Kemmañ ar spister"
-
-#: ../../Xconfigurator.pm_.c:1392
-msgid "Show information"
-msgstr "Diskouez titouroù"
-
-#: ../../Xconfigurator.pm_.c:1393
-msgid "Test again"
-msgstr "Amprouiñ adarre"
-
-#: ../../Xconfigurator.pm_.c:1394 ../../bootlook.pm_.c:238
-msgid "Quit"
-msgstr "Kuitaat"
-
-#: ../../Xconfigurator.pm_.c:1402
-#, fuzzy, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr "Derc'hel ar c'hefluniadur IP o ren"
-
-#: ../../Xconfigurator.pm_.c:1423
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Adereit ouzh %s evit bevaat ar c'hemmoù mar plij"
-
-#: ../../Xconfigurator.pm_.c:1443
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Dizereit mar plij ha neuze implijit Ctrl-Alt-WarGil"
-
-#: ../../Xconfigurator.pm_.c:1446
-msgid "X at startup"
-msgstr "X pa loc'her"
-
-#: ../../Xconfigurator.pm_.c:1447
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Kefluniañ ho urzhiataer evit lañsañ X ent emgefreek pa loc'ho a c'hellañ.\n"
-"Mennout a rit lañsañ X pa adloc'hit ?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 liv (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil liv (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil liv (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milion a livioù (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliard a livioù (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 ko"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 ko"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB or more"
-msgstr "16 Mo pe vuioc'h"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA standard, 640x480 da 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Gour-VGA, 800x600 da 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Kenglotus 8514, 1024x768 da 87 Hz pebeilet (800x600 ebet)"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Gour-VGA, 1024x768 da 87 Hz pebeilet, 800x600 da 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Gour-VGA astennet, 800x600 da 60 Hz, 640x480 da 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "G-VGA nann-pebeilet, 1024x768 da 60 Hz, 800x600 da 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "G-VGA talm uhel, 1024x768 da 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Lies-talm a c'hell ober 1280x1024 da 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Lies-talm a c'hell ober 1280x1024 da 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Lies-talm a c'hell ober 1280x1024 da 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Skramm a c'hell ober 1600x1200 da 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Skramm a c'hell ober 1600x1200 da 76 Hz"
-
-#: ../../any.pm_.c:99 ../../any.pm_.c:124
-msgid "First sector of boot partition"
-msgstr "Rann gentañ ar parzhadur loc'hañ"
-
-#: ../../any.pm_.c:99 ../../any.pm_.c:124 ../../any.pm_.c:197
-msgid "First sector of drive (MBR)"
-msgstr "Rann gentañ ar bladenn (MBR)"
-
-#: ../../any.pm_.c:103
-#, fuzzy
-msgid "SILO Installation"
-msgstr "Staliadur LILO/grub"
-
-#: ../../any.pm_.c:104 ../../any.pm_.c:117
-msgid "Where do you want to install the bootloader?"
-msgstr "Pelec'h e mennit staliañ ar c'harger loc'hañ ?"
-
-#: ../../any.pm_.c:116
-msgid "LILO/grub Installation"
-msgstr "Staliadur LILO/grub"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:142
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:130
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:131 ../../any.pm_.c:142
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:134
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:138
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:140 ../../any.pm_.c:142
-#, fuzzy
-msgid "Yaboot"
-msgstr "Gwrizienn"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:180
-msgid "Bootloader main options"
-msgstr "Dibarzhoù pennañ ar c'harger loc'hañ"
-
-#: ../../any.pm_.c:149 ../../any.pm_.c:181
-#, fuzzy
-msgid "Bootloader to use"
-msgstr "Dibarzhoù pennañ ar c'harger loc'hañ"
-
-#: ../../any.pm_.c:151
-#, fuzzy
-msgid "Bootloader installation"
-msgstr "Dibarzhoù pennañ ar c'harger loc'hañ"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:183
-msgid "Boot device"
-msgstr "Trobarzhell loc'hañ"
-
-#: ../../any.pm_.c:154
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne da ket en-dro gant BIOSoù kozh)"
-
-#: ../../any.pm_.c:155
-msgid "Compact"
-msgstr "Fetis"
-
-#: ../../any.pm_.c:155
-msgid "compact"
-msgstr "fetis"
-
-#: ../../any.pm_.c:156 ../../any.pm_.c:256
-msgid "Video mode"
-msgstr "Mod video"
-
-#: ../../any.pm_.c:158
-msgid "Delay before booting default image"
-msgstr "Gedvezh kent loc'hañ ar skeudenn dre ziouer"
-
-#: ../../any.pm_.c:160 ../../any.pm_.c:741
-#: ../../install_steps_interactive.pm_.c:904 ../../netconnect.pm_.c:629
-#: ../../printerdrake.pm_.c:98 ../../printerdrake.pm_.c:132
-#: ../../standalone/draknet_.c:569
-msgid "Password"
-msgstr "Tremenger"
-
-#: ../../any.pm_.c:161 ../../any.pm_.c:742
-#: ../../install_steps_interactive.pm_.c:905
-msgid "Password (again)"
-msgstr "Tremenger (adarre)"
-
-#: ../../any.pm_.c:162
-msgid "Restrict command line options"
-msgstr "Strishaat dibarzhoù al linenn urzhiañ"
-
-#: ../../any.pm_.c:162
-msgid "restrict"
-msgstr "strishaat"
-
-#: ../../any.pm_.c:164
-msgid "Clean /tmp at each boot"
-msgstr "Skarañ /tmp bep ma loc'her"
-
-#: ../../any.pm_.c:165
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Spisait ment ar memor vev diouzh ret (kavet %d Mo)"
-
-#: ../../any.pm_.c:167
-msgid "Enable multi profiles"
-msgstr "Aotren lies trolinenn"
-
-#: ../../any.pm_.c:171
-msgid "Give the ram size in MB"
-msgstr "Roit ment ar memor vev e Mo"
-
-#: ../../any.pm_.c:173
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Didalvout eo ``Strishaat dibarzhoù al linenn urzhiañ'' hep tremenger"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:718
-#: ../../install_steps_interactive.pm_.c:899
-msgid "Please try again"
-msgstr "Klaskit adarre mar plij"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:718
-#: ../../install_steps_interactive.pm_.c:899
-msgid "The passwords do not match"
-msgstr "An tremegerioù ne glot ket"
-
-#: ../../any.pm_.c:182
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:184
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:185
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:186
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:187
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:188
-#, fuzzy
-msgid "Default OS?"
-msgstr "Dre ziouer"
-
-#: ../../any.pm_.c:210
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Setu da heul an enmontoù liesseurt.\n"
-"Gallout a rit ouzhpennañ lod pe gemmañ a re a zo."
-
-#: ../../any.pm_.c:220 ../../printerdrake.pm_.c:356
-msgid "Add"
-msgstr "Ouzhpennañ"
-
-#: ../../any.pm_.c:220 ../../any.pm_.c:729 ../../diskdrake.pm_.c:46
-#: ../../printerdrake.pm_.c:356
-msgid "Done"
-msgstr "Graet"
-
-#: ../../any.pm_.c:220
-#, fuzzy
-msgid "Modify"
-msgstr "Kemmañ RAID"
-
-#: ../../any.pm_.c:228
-msgid "Which type of entry do you want to add?"
-msgstr "Pe seurt enmont a vennit ouzhpennañ"
-
-#: ../../any.pm_.c:229
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:229
-msgid "Other OS (SunOS...)"
-msgstr "Reizhiadoù (SunOS...)"
-
-#: ../../any.pm_.c:230
-msgid "Other OS (MacOS...)"
-msgstr "Reizhiadoù (MacOS...)"
-
-#: ../../any.pm_.c:230
-msgid "Other OS (windows...)"
-msgstr "Reizhiadoù (windows...)"
-
-#: ../../any.pm_.c:250 ../../any.pm_.c:252
-msgid "Image"
-msgstr "Skeudenn"
-
-#: ../../any.pm_.c:253 ../../any.pm_.c:264
-msgid "Root"
-msgstr "Gwrizienn"
-
-#: ../../any.pm_.c:254 ../../any.pm_.c:283
-msgid "Append"
-msgstr "Ouzhpennañ"
-
-#: ../../any.pm_.c:258
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:259
-msgid "Read-write"
-msgstr "Lenn-skrivañ "
-
-#: ../../any.pm_.c:266
-msgid "Table"
-msgstr "Taolenn"
-
-#: ../../any.pm_.c:267
-msgid "Unsafe"
-msgstr "Arvarus"
-
-#: ../../any.pm_.c:274 ../../any.pm_.c:279 ../../any.pm_.c:282
-msgid "Label"
-msgstr "Skridennad"
-
-#: ../../any.pm_.c:276 ../../any.pm_.c:287
-msgid "Default"
-msgstr "Dre ziouer"
-
-#: ../../any.pm_.c:284
-#, fuzzy
-msgid "Initrd-size"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:286
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:294
-msgid "Remove entry"
-msgstr "Dilemel an enmont"
-
-#: ../../any.pm_.c:297
-msgid "Empty label not allowed"
-msgstr "Berzet eo ar skridennadoù goullo"
-
-#: ../../any.pm_.c:298
-msgid "This label is already used"
-msgstr "En implij eo ar skridennad-se endeo"
-
-#: ../../any.pm_.c:317
-#, fuzzy
-msgid "What type of partitioning?"
-msgstr "Peseurt moullerez hoc'h eus ?"
-
-#: ../../any.pm_.c:608
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Kavet etrefas %s %s"
-
-#: ../../any.pm_.c:609
-msgid "Do you have another one?"
-msgstr "Hag un all hoc'h eus ?"
-
-#: ../../any.pm_.c:610
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Hag un etrefas %s bennak a zo ganeoc'h ?"
-
-#: ../../any.pm_.c:612 ../../interactive.pm_.c:104 ../../my_gtk.pm_.c:616
-#: ../../printerdrake.pm_.c:237
-msgid "No"
-msgstr "Ket"
-
-#: ../../any.pm_.c:612 ../../interactive.pm_.c:104 ../../my_gtk.pm_.c:616
-msgid "Yes"
-msgstr "Ya"
-
-#: ../../any.pm_.c:613
-msgid "See hardware info"
-msgstr "Gwelet titouroù periantel"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:648
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "O staliañ ur sturier evit kartenn %s %s"
-
-#: ../../any.pm_.c:649
-#, c-format
-msgid "(module %s)"
-msgstr "(mollad %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:660
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Pe sturier %s a zlefen amprouiñ ?"
-
-#: ../../any.pm_.c:668
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"E degouezhoù 'zo, ar sturier %s en deus ezhomm titouroù ouzhpenn evit mont\n"
-"en-dro reizh, daoust ma da en-dro mat hepto peurvuiañ. Ha mennout a rit "
-"spisaat\n"
-"dibaboù ouzphenn evitañ, pe aotren d'ar sturier amprouiñ ho penvek evit\n"
-"an titouroù en deus ezhomm ? A-wechoù, amprouiñ a c'hell sac'hañ un "
-"urzhiataer,\n"
-"hogen ne raio reuz ebet."
-
-#: ../../any.pm_.c:673
-msgid "Autoprobe"
-msgstr "Embrouiñ"
-
-#: ../../any.pm_.c:673
-msgid "Specify options"
-msgstr "Spisait dibarzhoù"
-
-#: ../../any.pm_.c:677
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Bremañ e c'hellit pourvezañ e zibarzhoù d'ar mollad %s"
-
-#: ../../any.pm_.c:683
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Bremañ e c'hellit pourvezañ e zibarzhoù d'ar mollad %s.\n"
-"Diouzh ar furmad ``anv=talvoud anv2=talvoud2...'' eo an dibaboù.\n"
-"Da skouer, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:686
-msgid "Module options:"
-msgstr "Dibarzhoù ar mollad :"
-
-#: ../../any.pm_.c:697
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Kargañ ar mollad %s a zo sac'het.\n"
-"Mennout a rit klask adarre gant arventennoù all ?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid "(already added %s)"
-msgstr "(ouzhpennet %s endeo)"
-
-#: ../../any.pm_.c:719
-msgid "This password is too simple"
-msgstr "Re eeun eo an tremeger"
-
-#: ../../any.pm_.c:720
-msgid "Please give a user name"
-msgstr "Roit un anv arveriad mar plij"
-
-#: ../../any.pm_.c:721
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"An anv arveriad a zle bezañ ennañ lizherennoù munut, sifroù, `-' ha `_' "
-"hepken"
-
-#: ../../any.pm_.c:722
-msgid "This user name is already added"
-msgstr "En implij eo an anv arveriad-se endeo"
-
-#: ../../any.pm_.c:726
-msgid "Add user"
-msgstr "Ouzhpennañ un arveriad"
-
-#: ../../any.pm_.c:727
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Skrivit un arveriad\n"
-"%s"
-
-#: ../../any.pm_.c:728
-msgid "Accept user"
-msgstr "Aotren an arveriad"
-
-#: ../../any.pm_.c:739
-msgid "Real name"
-msgstr "Anv gwirion"
-
-#: ../../any.pm_.c:740 ../../printerdrake.pm_.c:97
-#: ../../printerdrake.pm_.c:131
-msgid "User name"
-msgstr "Anv arveriad"
-
-#: ../../any.pm_.c:743
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:745
-msgid "Icon"
-msgstr "Arlun"
-
-#: ../../any.pm_.c:766
-msgid "Autologin"
-msgstr ""
-
-#: ../../any.pm_.c:767
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"If you don't want to use this feature, click on the cancel button."
-msgstr ""
-"Kefluniañ ho urzhiataer evit lañsañ X ent emgefreek pa loc'ho a c'hellañ.\n"
-"Mennout a rit lañsañ X pa adloc'hit ?"
-
-#: ../../any.pm_.c:769
-#, fuzzy
-msgid "Choose the default user:"
-msgstr "Dibabit ar ment nevez"
-
-#: ../../any.pm_.c:770
-#, fuzzy
-msgid "Choose the window manager to run:"
-msgstr "Dibabit ar benveg a vennit staliañ"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:262 ../../bootloader.pm_.c:608
-#, fuzzy, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Degemer mat e %s, an dibaber reizhiad oberian~ !\n"
-"\n"
-"Evit rollan~ an dibabou aotreet, stokit <TAB>.\n"
-"\n"
-"Evit kargan~ unan anezho, skrivit e anv ha stokit <ENKAS> pe c'hortozit %d "
-"eilenn evit al loc'han~ dre ziouer.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:809
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Degemer mat e GRUB an dibaber reizhiad oberia¤ !"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:812
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Implijit ar stokelloù %c ha %c evit diuz pe enmont zo war wel"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:815
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Stokit enkas evit loc'ha¤ ar RK diuzet, 'e' evit aoza¤ an"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:818
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "urzhiado— kent loc'ha¤, pe 'c' evit ul linenn-urzhia¤."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:821
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "An enmont war wel a vo loc'het ent emgefreek e %d eilenn."
-
-#: ../../bootloader.pm_.c:825
-msgid "not enough room in /boot"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:918
-msgid "Desktop"
-msgstr "Gorretaol"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:920
-msgid "Start Menu"
-msgstr "Meuziad Lañsañ"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "Kefluniadur goude staliañ"
-
-#: ../../bootlook.pm_.c:79
-#, fuzzy
-msgid "/_File"
-msgstr "Restroù :\n"
-
-#: ../../bootlook.pm_.c:81
-msgid "/File/_New"
-msgstr ""
-
-#: ../../bootlook.pm_.c:82
-msgid "<control>N"
-msgstr ""
-
-#: ../../bootlook.pm_.c:84
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../bootlook.pm_.c:85
-msgid "<control>O"
-msgstr ""
-
-#: ../../bootlook.pm_.c:87
-msgid "/File/_Save"
-msgstr ""
-
-#: ../../bootlook.pm_.c:88
-msgid "<control>S"
-msgstr ""
-
-#: ../../bootlook.pm_.c:90
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "/File/-"
-msgstr ""
-
-#: ../../bootlook.pm_.c:93
-msgid "/File/_Quit"
-msgstr ""
-
-#: ../../bootlook.pm_.c:94
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:96
-msgid "/_Options"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-msgid "/Options/Test"
-msgstr ""
-
-#: ../../bootlook.pm_.c:99
-msgid "/_Help"
-msgstr ""
-
-#: ../../bootlook.pm_.c:101
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../bootlook.pm_.c:111 ../../standalone/drakgw_.c:634
-#: ../../standalone/draknet_.c:262 ../../standalone/tinyfirewall_.c:57
-#, fuzzy
-msgid "Configure"
-msgstr "Kefluniañ X"
-
-#: ../../bootlook.pm_.c:114
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Lugerezh ar voullerez"
-
-#: ../../bootlook.pm_.c:121
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Anv domani"
-
-#: ../../bootlook.pm_.c:131
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:134
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Skramm"
-
-#: ../../bootlook.pm_.c:137
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Kemmañ ar skramm"
-
-#: ../../bootlook.pm_.c:140
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:144
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:169
-#, fuzzy
-msgid "Boot mode"
-msgstr "Trobarzhell loc'hañ"
-
-#: ../../bootlook.pm_.c:179
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:187
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:193
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:210
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:228
-#, fuzzy
-msgid "Default Runlevel"
-msgstr "Dre ziouer"
-
-#: ../../bootlook.pm_.c:236 ../../standalone/draknet_.c:88
-#: ../../standalone/draknet_.c:120 ../../standalone/draknet_.c:184
-#: ../../standalone/draknet_.c:302 ../../standalone/draknet_.c:396
-#: ../../standalone/draknet_.c:473 ../../standalone/draknet_.c:509
-#: ../../standalone/draknet_.c:617
-msgid "OK"
-msgstr ""
-
-#: ../../bootlook.pm_.c:238 ../../install_steps_gtk.pm_.c:576
-#: ../../interactive.pm_.c:114 ../../interactive.pm_.c:269
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:357
-#: ../../my_gtk.pm_.c:360 ../../my_gtk.pm_.c:617
-#: ../../standalone/drakgw_.c:639 ../../standalone/draknet_.c:95
-#: ../../standalone/draknet_.c:127 ../../standalone/draknet_.c:295
-#: ../../standalone/draknet_.c:485 ../../standalone/draknet_.c:631
-#: ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Nullañ"
-
-#: ../../bootlook.pm_.c:315
-msgid "can not open /etc/inittab for reading: $!"
-msgstr ""
-
-#: ../../bootlook.pm_.c:369
-msgid "can not open /etc/sysconfig/autologin for reading: $!"
-msgstr ""
-
-#: ../../bootlook.pm_.c:435 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Staliadur LILO a zo sac'het. Degouezhet eo ar fazi a heul :"
-
-#: ../../diskdrake.pm_.c:21 ../../diskdrake.pm_.c:462
-msgid "Create"
-msgstr "Krouiñ"
-
-#: ../../diskdrake.pm_.c:22
-msgid "Unmount"
-msgstr "Divarc'hañ"
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:464
-msgid "Delete"
-msgstr "Dilemel"
-
-#: ../../diskdrake.pm_.c:23
-msgid "Format"
-msgstr "Furmadiñ"
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:653
-msgid "Resize"
-msgstr "Adventañ"
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:462
-#: ../../diskdrake.pm_.c:518
-msgid "Type"
-msgstr "Seurt"
-
-#: ../../diskdrake.pm_.c:24 ../../diskdrake.pm_.c:539
-msgid "Mount point"
-msgstr "Poent marc'hañ"
-
-#: ../../diskdrake.pm_.c:38
-msgid "Write /etc/fstab"
-msgstr "Skrivañ /etc/fstab"
-
-#: ../../diskdrake.pm_.c:39
-msgid "Toggle to expert mode"
-msgstr "Tremen er mod mailh"
-
-#: ../../diskdrake.pm_.c:40
-msgid "Toggle to normal mode"
-msgstr "Tremen er mod boas"
-
-#: ../../diskdrake.pm_.c:41
-msgid "Restore from file"
-msgstr "Adaozañ adalek ar restr"
-
-#: ../../diskdrake.pm_.c:42
-msgid "Save in file"
-msgstr "Enrollañ er restr"
-
-#: ../../diskdrake.pm_.c:43
-msgid "Wizard"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:44
-msgid "Restore from floppy"
-msgstr "Assevel adalek ar pladennig"
-
-#: ../../diskdrake.pm_.c:45
-msgid "Save on floppy"
-msgstr "Enrollañ war bladennig"
-
-#: ../../diskdrake.pm_.c:49
-msgid "Clear all"
-msgstr "Skarañ an holl"
-
-#: ../../diskdrake.pm_.c:54
-msgid "Format all"
-msgstr "Furmadiñ an holl"
-
-#: ../../diskdrake.pm_.c:55
-msgid "Auto allocate"
-msgstr "Ac'hubiñ ent emgefreek"
-
-#: ../../diskdrake.pm_.c:59
-msgid "All primary partitions are used"
-msgstr "Ac'hubet eo an holl barzhadurioù kentañ renk"
-
-#: ../../diskdrake.pm_.c:59
-msgid "I can't add any more partition"
-msgstr "N'hellan ouzpennañ parzhadur ebet ken"
-
-#: ../../diskdrake.pm_.c:59
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Evit kaout muioc'h a barzhadurioù, lamit unan evit ma c'hellot krouiñ ur "
-"parzhadur astennet mar plij"
-
-#: ../../diskdrake.pm_.c:61
-msgid "Not enough space for auto-allocating"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:63
-msgid "Undo"
-msgstr "Dizober"
-
-#: ../../diskdrake.pm_.c:64
-msgid "Write partition table"
-msgstr "Skrivañ an daolenn barzhañ"
-
-#: ../../diskdrake.pm_.c:65 ../../install_steps_interactive.pm_.c:185
-#, fuzzy
-msgid "More"
-msgstr "Dilec'hiañ"
-
-#: ../../diskdrake.pm_.c:116
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:116
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:116
-msgid "HFS"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:116
-msgid "SunOS"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:116
-msgid "Swap"
-msgstr "Disloañ"
-
-#: ../../diskdrake.pm_.c:117
-msgid "Empty"
-msgstr "Goullo"
-
-#: ../../diskdrake.pm_.c:117 ../../install_steps_gtk.pm_.c:407
-#: ../../mouse.pm_.c:145
-msgid "Other"
-msgstr "All"
-
-#: ../../diskdrake.pm_.c:123
-msgid "Filesystem types:"
-msgstr "Seurt ar reizhiadoù restroù :"
-
-#: ../../diskdrake.pm_.c:132 ../../install_steps_gtk.pm_.c:577
-msgid "Details"
-msgstr "Munudoù"
-
-#: ../../diskdrake.pm_.c:147
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Ur mell barzhadur FAT hoc'h eus\n"
-"(implijet gant MicroSoft Dos/Windows peurliesañ).\n"
-"Aliañ a ran ouzoc'h adventañ ar parzhadur-se\n"
-"(klikit warni, da c'houde klikit war \"Adventañ\")"
-
-#: ../../diskdrake.pm_.c:152
-msgid "Please make a backup of your data first"
-msgstr "Gwarezit ho roadoù da gentañ mar plij"
-
-#: ../../diskdrake.pm_.c:152 ../../diskdrake.pm_.c:170
-#: ../../diskdrake.pm_.c:179 ../../diskdrake.pm_.c:570
-#: ../../diskdrake.pm_.c:592
-msgid "Read carefully!"
-msgstr "Lennit aketus !"
-
-#: ../../diskdrake.pm_.c:155
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"M'emaoc'h e soñj implijout aboot, taolit evezh leuskel un egor dieub (2048 "
-"rann\n"
-"a zo a-walc'h) e deroù ar bladenn"
-
-#: ../../diskdrake.pm_.c:170
-msgid "Be careful: this operation is dangerous."
-msgstr "Bezit war evezh : arvarus eo an obererezh-mañ."
-
-#: ../../diskdrake.pm_.c:214 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:322 ../../standalone/diskdrake_.c:66
-msgid "Error"
-msgstr "Fazi"
-
-#: ../../diskdrake.pm_.c:238 ../../diskdrake.pm_.c:748
-msgid "Mount point: "
-msgstr "Poent marc'hañ :"
-
-#: ../../diskdrake.pm_.c:239 ../../diskdrake.pm_.c:298
-msgid "Device: "
-msgstr "Trobarzhell :"
-
-#: ../../diskdrake.pm_.c:240
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lizher ar bladenn DOS : %s (diwar varteze hepken)\n"
-
-#: ../../diskdrake.pm_.c:244 ../../diskdrake.pm_.c:251
-#: ../../diskdrake.pm_.c:301
-msgid "Type: "
-msgstr "Seurt : "
-
-#: ../../diskdrake.pm_.c:248
-msgid "Name: "
-msgstr "Anv: "
-
-#: ../../diskdrake.pm_.c:253
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "O kregiñ : rann %s\n"
-
-#: ../../diskdrake.pm_.c:254
-#, c-format
-msgid "Size: %s"
-msgstr "Ment: %s"
-
-#: ../../diskdrake.pm_.c:256
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s rann"
-
-#: ../../diskdrake.pm_.c:258
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Kranenn %d da granenn %d\n"
-
-#: ../../diskdrake.pm_.c:259
-msgid "Formatted\n"
-msgstr "Furmadet\n"
-
-#: ../../diskdrake.pm_.c:260
-msgid "Not formatted\n"
-msgstr "Ket furmadet\n"
-
-#: ../../diskdrake.pm_.c:261
-msgid "Mounted\n"
-msgstr "Marc'het\n"
-
-#: ../../diskdrake.pm_.c:262
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake.pm_.c:264
-#, c-format
-msgid "Loopback file(s): %s\n"
-msgstr "Restr(où) saveteiñ : %s\n"
-
-#: ../../diskdrake.pm_.c:265
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Parzhadur loc'het dre ziouer\n"
-"    (evit loc'hañ MS-DOS, ket evit lilo)\n"
-
-#: ../../diskdrake.pm_.c:267
-#, c-format
-msgid "Level %s\n"
-msgstr "Live %s\n"
-
-#: ../../diskdrake.pm_.c:268
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Ment diaoz %s\n"
-
-#: ../../diskdrake.pm_.c:269
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Pladennoù RAID %s\n"
-
-#: ../../diskdrake.pm_.c:271
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Anv ar restr saveteiñ : %s"
-
-#: ../../diskdrake.pm_.c:274
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:277
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#
-#: ../../diskdrake.pm_.c:294
-msgid "Please click on a partition"
-msgstr "Klikit war ur parzhadur mar plij"
-
-#: ../../diskdrake.pm_.c:299
-#, c-format
-msgid "Size: %s\n"
-msgstr "Ment: %s\n"
-
-#: ../../diskdrake.pm_.c:300
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Mentoniezh : %s kranenn, %s penn, %s rann\n"
-
-#: ../../diskdrake.pm_.c:302
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Pladennoù LVM %s\n"
-
-#: ../../diskdrake.pm_.c:303
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Seurt taolenn barzhañ : %s\n"
-
-#: ../../diskdrake.pm_.c:304
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "war bus %d Nn %d\n"
-
-#: ../../diskdrake.pm_.c:320
-msgid "Mount"
-msgstr "Marc'hañ"
-
-#: ../../diskdrake.pm_.c:322
-msgid "Active"
-msgstr "Bevaat"
-
-#: ../../diskdrake.pm_.c:324
-msgid "Add to RAID"
-msgstr "Ouzhpennañ da RAID"
-
-#: ../../diskdrake.pm_.c:326
-msgid "Remove from RAID"
-msgstr "Lemel diwar RAID"
-
-#: ../../diskdrake.pm_.c:328
-msgid "Modify RAID"
-msgstr "Kemmañ RAID"
-
-#: ../../diskdrake.pm_.c:330
-msgid "Add to LVM"
-msgstr "Ouzhpennañ da LVM"
-
-#: ../../diskdrake.pm_.c:332
-msgid "Remove from LVM"
-msgstr "Lemel diwar LVM"
-
-#: ../../diskdrake.pm_.c:334
-msgid "Use for loopback"
-msgstr "Implij da saveteiñ"
-
-#: ../../diskdrake.pm_.c:341
-msgid "Choose action"
-msgstr "Dibabit un obererezh"
-
-#: ../../diskdrake.pm_.c:435
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Ma zigarezit na asantiñ krouiñ /boot ken pell war ar bladenn (war ur granenn "
-"> 1024).\n"
-"Pe e implijit LILO ha ne daio ket en-dro, pe ne rit ket ha n'hoc'h eus ket "
-"ezhomm a /boot"
-
-#: ../../diskdrake.pm_.c:439
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Lec'hiet eo ar parzhadur hoc'h eus diuzet da ouzphennañ evel gwrizienn (/) "
-"en tu-hont\n"
-"d'ar 1024vet kranenn eus ar bladenn galet, ha n'hoc'h eus ket a barzhadur /"
-"boot.\n"
-"Ma vennit implijout ar merour loc'hañ LILO, taolit pled da ouzhpennañ ur "
-"parzhadur /boot"
-
-#: ../../diskdrake.pm_.c:445
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:462 ../../diskdrake.pm_.c:464
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Grit kentoc'h gant ``%s''"
-
-#: ../../diskdrake.pm_.c:468
-msgid "Use ``Unmount'' first"
-msgstr "Implijit ``Divarc'hañ'' da gentañ"
-
-#: ../../diskdrake.pm_.c:469 ../../diskdrake.pm_.c:513
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Goude kemmañ seurt ar parzhadur %s, holl roadoù ar parzhadur-se a vo kollet"
-
-#: ../../diskdrake.pm_.c:481
-msgid "Continue anyway?"
-msgstr "Kenderc'hel evelato ?"
-
-#: ../../diskdrake.pm_.c:486
-msgid "Quit without saving"
-msgstr "Kuitaat hep enrollañ"
-
-#: ../../diskdrake.pm_.c:486
-msgid "Quit without writing the partition table?"
-msgstr "Kuitaat hep skrivañ an daolenn barzhañ ?"
-
-#: ../../diskdrake.pm_.c:516
-msgid "Change partition type"
-msgstr "Kemmañ seurt ar parzhadur"
-
-#: ../../diskdrake.pm_.c:517
-#, fuzzy
-msgid "Which filesystem do you want?"
-msgstr "Pe seurt parzhadur a vennit ?"
-
-#: ../../diskdrake.pm_.c:520 ../../diskdrake.pm_.c:780
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:537
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Pelec'h e mennit marc'hañ ar restr saveteiñ %s ?"
-
-#: ../../diskdrake.pm_.c:538
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Pelec'h e mennit marc'hañ an drobarzhell %s ?"
-
-#: ../../diskdrake.pm_.c:542
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"N'hellan ket dizober ar poent marc'hañ dre m'eo implijet ar parzhadur-se\n"
-"evit saveteiñ. Lamit ar saveteiñ da gentañ"
-
-#: ../../diskdrake.pm_.c:561
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Goude furmadiñ ar parzhadur %s, holl roadoù ar parzhadur-se a vo kollet"
-
-#: ../../diskdrake.pm_.c:563
-msgid "Formatting"
-msgstr "O furmadiñ"
-
-#: ../../diskdrake.pm_.c:564
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "O furmadiñ ar restr saveteiñ %s"
-
-#: ../../diskdrake.pm_.c:565 ../../install_steps_interactive.pm_.c:430
-#, c-format
-msgid "Formatting partition %s"
-msgstr "O furmadiñ ar parzhadur %s"
-
-#: ../../diskdrake.pm_.c:570
-msgid "After formatting all partitions,"
-msgstr "Goude furmadiñ an holl barzhadurioù,"
-
-#: ../../diskdrake.pm_.c:570
-msgid "all data on these partitions will be lost"
-msgstr "kollet e vo holl roadoù war ar parzhadurioù-se"
-
-#: ../../diskdrake.pm_.c:576
-msgid "Move"
-msgstr "Dilec'hiañ"
-
-#: ../../diskdrake.pm_.c:577
-msgid "Which disk do you want to move it to?"
-msgstr "Da beseurt pladenn e mennit dilec'hiañ ?"
-
-#: ../../diskdrake.pm_.c:578
-msgid "Sector"
-msgstr "Rann"
-
-#: ../../diskdrake.pm_.c:579
-msgid "Which sector do you want to move it to?"
-msgstr "Da beseurt rann e mennit dilec'hiañ ?"
-
-#: ../../diskdrake.pm_.c:582
-msgid "Moving"
-msgstr "O tilec'hiañ"
-
-#: ../../diskdrake.pm_.c:582
-msgid "Moving partition..."
-msgstr "O tilec'hiañ ur parzhadur..."
-
-#: ../../diskdrake.pm_.c:592
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "War-nes bezañ skrivet war bladenn eo taolenn barzhañ an ardivink %s !"
-
-#: ../../diskdrake.pm_.c:594
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Ret e vo deoc'h adloc'hañ a-raok ma talvezo ar c'hemm"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Computing FAT filesystem bounds"
-msgstr "O jediñ bevennoù ar reizhiad restroù FAT"
-
-#: ../../diskdrake.pm_.c:615 ../../diskdrake.pm_.c:680
-#: ../../install_interactive.pm_.c:107
-msgid "Resizing"
-msgstr "Oc'h adventañ"
-
-#: ../../diskdrake.pm_.c:643
-#, fuzzy
-msgid "This partition is not resizeable"
-msgstr "Pe seurt parzhadur a vennit ?"
-
-#: ../../diskdrake.pm_.c:648
-msgid "All data on this partition should be backed-up"
-msgstr "Mat e vije gwareziñ holl roadoù ar parzhadur-se"
-
-#: ../../diskdrake.pm_.c:650
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Goude adventañ ar parzhadur %s e vo kollet holl roadoù ar parzhadur-se"
-
-#: ../../diskdrake.pm_.c:660
-msgid "Choose the new size"
-msgstr "Dibabit ar ment nevez"
-
-#: ../../diskdrake.pm_.c:660 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "Mo"
-
-#: ../../diskdrake.pm_.c:714
-msgid "Create a new partition"
-msgstr "Krouiñ ur parzhadur nevez"
-
-#: ../../diskdrake.pm_.c:740
-msgid "Start sector: "
-msgstr "Rann kregiñ :"
-
-#: ../../diskdrake.pm_.c:744 ../../diskdrake.pm_.c:819
-msgid "Size in MB: "
-msgstr "Ment e Mo :"
-
-#: ../../diskdrake.pm_.c:747 ../../diskdrake.pm_.c:822
-msgid "Filesystem type: "
-msgstr "Seurt ar reizhiad restroù :"
-
-#: ../../diskdrake.pm_.c:750
-msgid "Preference: "
-msgstr "Dibarzh :"
-
-#: ../../diskdrake.pm_.c:798
-msgid "This partition can't be used for loopback"
-msgstr "N'heller ket implijout ar parzhadur-mañ evit saveteiñ"
-
-#: ../../diskdrake.pm_.c:808
-msgid "Loopback"
-msgstr "Saveteiñ"
-
-#: ../../diskdrake.pm_.c:818
-msgid "Loopback file name: "
-msgstr "Anv ar restr saveteiñ :"
-
-#: ../../diskdrake.pm_.c:844
-msgid "File already used by another loopback, choose another one"
-msgstr "Restr implijet gant ur saveteiñ all endeo, dibabit unan all"
-
-#: ../../diskdrake.pm_.c:845
-msgid "File already exists. Use it?"
-msgstr "Ar restr a zo endeo. E implijout ?"
-
-#: ../../diskdrake.pm_.c:867 ../../diskdrake.pm_.c:883
-msgid "Select file"
-msgstr "Diuzit ar restr"
-
-#: ../../diskdrake.pm_.c:876
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"N'eo ket heñvel ment an daolenn barzhañ gwarezet\n"
-"Kenderc'hel memestra ?"
-
-#: ../../diskdrake.pm_.c:884
-msgid "Warning"
-msgstr "Ho evezh"
-
-#: ../../diskdrake.pm_.c:885
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Lakait ur bladennig el lenner\n"
-"Kollet e vo holl roadoù ar bladennig-se"
-
-#: ../../diskdrake.pm_.c:896
-msgid "Trying to rescue partition table"
-msgstr "O klask assevel an daolenn barzhañ"
-
-#: ../../diskdrake.pm_.c:905
-msgid "device"
-msgstr "trobarzhell"
-
-#: ../../diskdrake.pm_.c:906
-msgid "level"
-msgstr "live"
-
-#: ../../diskdrake.pm_.c:907
-msgid "chunk size"
-msgstr "ment diaoz"
-
-#: ../../diskdrake.pm_.c:919
-msgid "Choose an existing RAID to add to"
-msgstr "Dibabit da be RAID ouzhpennañ"
-
-#: ../../diskdrake.pm_.c:920 ../../diskdrake.pm_.c:946
-msgid "new"
-msgstr "nevez"
-
-#: ../../diskdrake.pm_.c:944
-msgid "Choose an existing LVM to add to"
-msgstr "Dibabit da be LVM ouzhpennañ"
-
-#: ../../diskdrake.pm_.c:949
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:976
-msgid "Removable media automounting"
-msgstr "Emvarc'hañ ar skoroù lem/laka"
-
-#: ../../diskdrake.pm_.c:977
-msgid "Rescue partition table"
-msgstr "Taolenn barzhañ saveteerezh"
-
-#: ../../diskdrake.pm_.c:979
-msgid "Reload"
-msgstr "Adkargañ"
-
-#: ../../fs.pm_.c:88 ../../fs.pm_.c:95 ../../fs.pm_.c:101 ../../fs.pm_.c:107
-#: ../../fs.pm_.c:113
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "furmadiñ er seurt %s eus %s a zo sac'het"
-
-#: ../../fs.pm_.c:143
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "N'ouzon ket penaos furmadiñ %s er seurt %s"
-
-#: ../../fs.pm_.c:230
-msgid "mount failed: "
-msgstr "marc'hañ sac'het :"
-
-#: ../../fs.pm_.c:242
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fazi en ur zivarc'hañ %s : %s"
-
-#: ../../fsedit.pm_.c:21
-#, fuzzy
-msgid "simple"
-msgstr "Restr"
-
-#: ../../fsedit.pm_.c:30
-#, fuzzy
-msgid "server"
-msgstr "servijer X"
-
-#: ../../fsedit.pm_.c:262
-msgid "Mount points must begin with a leading /"
-msgstr "Poentoù marc'hañ a rank kregiñ gant /"
-
-#: ../../fsedit.pm_.c:265
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Bez' ez eus ur parzhadur e boent marc'hañ %s endeo\n"
-
-#: ../../fsedit.pm_.c:273
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Marc'hañ kelc'hiek %s\n"
-
-#: ../../fsedit.pm_.c:285
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:286
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:287
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:369
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fazi en ur zigeriñ %s evit skrivañ : %s"
-
-#: ../../fsedit.pm_.c:453
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"C'hoarvezet ez eus ur fazi - n'eus bet kavet trobarzhell reizh ebet a-benn "
-"krouiñ reizhiadoù restroù nevez warni. Gwiriit abeg ar gudenn-mañ en ho "
-"ardivinkaj mar plij "
-
-#: ../../fsedit.pm_.c:467
-msgid "You don't have any partitions!"
-msgstr "N'hoc'h eus parzhadur ebet !"
-
-#: ../../help.pm_.c:9
-#, fuzzy
-msgid ""
-"Please choose your preferred language for installation and system usage."
-msgstr "Dibabit ho yezh muiañ-karet evit staliañ hag implijout ar reizhiad."
-
-#: ../../help.pm_.c:12
-msgid ""
-"You need to accept the terms of the above license to continue installation.\n"
-"\n"
-"\n"
-"Please click on \"Accept\" if you agree with its terms.\n"
-"\n"
-"\n"
-"Please click on \"Refuse\" if you disagree with its terms. Installation will "
-"end without modifying your current\n"
-"configuration."
-msgstr ""
-
-#: ../../help.pm_.c:22
-msgid "Choose the layout corresponding to your keyboard from the list above"
-msgstr "Dibabit ar reizhadur a glot gant ho stokellaoueg er roll a-us"
-
-#: ../../help.pm_.c:25
-msgid ""
-"If you wish other languages (than the one you choose at\n"
-"beginning of installation) will be available after installation, please "
-"chose\n"
-"them in list above. If you want select all, you just need to select \"All\"."
-msgstr ""
-
-#: ../../help.pm_.c:30
-msgid ""
-"Please choose \"Install\" if there are no previous version of Linux-"
-"Mandrake\n"
-"installed or if you wish to use several operating systems.\n"
-"\n"
-"\n"
-"Please choose \"Update\" if you wish to update an already installed version "
-"of Linux-Mandrake.\n"
-"\n"
-"\n"
-"Depend of your knowledge in GNU/Linux, you can choose one of the following "
-"levels to install or update your\n"
-"Linux-Mandrake operating system:\n"
-"\n"
-"\t* Recommended: if you have never installed a GNU/Linux operating system "
-"choose this. Installation will be\n"
-"\t  be very easy and you will be asked only on few questions.\n"
-"\n"
-"\n"
-"\t* Customized: if you are familiar enough with GNU/Linux, you may choose "
-"the primary usage (workstation, server,\n"
-"\t  development) of your system. You will need to answer to more questions "
-"than in \"Recommended\" installation\n"
-"\t  class, so you need to know how GNU/Linux works to choose this "
-"installation class.\n"
-"\n"
-"\n"
-"\t* Expert: if you have a good knowledge in GNU/Linux, you can choose this "
-"installation class. As in \"Customized\"\n"
-"\t  installation class, you will be able to choose the primary usage "
-"(workstation, server, development). Be very\n"
-"\t  careful before choose this installation class. You will be able to "
-"perform a higly customized installation.\n"
-"\t  Answer to some questions can be very difficult if you haven't a good "
-"knowledge in GNU/Linux. So, don't choose\n"
-"\t  this installation class unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:56
-msgid ""
-"Select:\n"
-"\n"
-"  - Customized: If you are familiar enough with GNU/Linux, you may then "
-"choose\n"
-"    the primary usage for your machine. See below for details.\n"
-"\n"
-"\n"
-"  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-"    perform a highly customized installation. As for a \"Customized\"\n"
-"    installation class, you will be able to select the usage for your "
-"system.\n"
-"    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-"DOING!"
-msgstr ""
-"Diuzit :\n"
-"\n"
-"  - Neuziet : Ma 'z oc'h kustumet a-walc'h gant GNU/Linux, tu vo neuze "
-"deoc'h\n"
-"    dibab an implij pennañ evit ho ardivink. Sellit a-is evit munudoù.\n"
-"\n"
-"\n"
-"  - Mailh : Ma 'z oc'h en ho pleud gant GNU/Linux ha mennet da seveniñ\n"
-"    ur staliadur neuziet-tre. Evel evit ar renkad staliañ \"Neuziet\" e vo\n"
-"    tu deoc'h diuz an implij evit hor reizhiad.\n"
-"    Hogen mar plij, NA ZIBABIT KET SE NEMET MA OUZIT PEZH EMAOC'H OC'H OBER !"
-
-#: ../../help.pm_.c:68
-#, fuzzy
-msgid ""
-"You must now define your machine usage. Choices are:\n"
-"\n"
-"\t* Workstation: this the ideal choice if you intend to use your machine "
-"primarily for everyday use, at office or\n"
-"\t  at home.\n"
-"\n"
-"\n"
-"\t* Development: if you intend to use your machine primarily for software "
-"development, it is the good choice. You\n"
-"\t  will then have a complete collection of software installed in order to "
-"compile, debug and format source code,\n"
-"\t  or create software packages.\n"
-"\n"
-"\n"
-"\t* Server: if you intend to use this machine as a server, it is the good "
-"choice. Either a file server (NFS or\n"
-"\t  SMB), a print server (Unix style or Microsoft Windows style), an "
-"authentication server (NIS), a database\n"
-"\t  server and so on. As such, do not expect any gimmicks (KDE, GNOME, etc.) "
-"to be installed."
-msgstr ""
-"An dibaboù liessek evit implij ho ardivink (en ur c'houlakaat neuze hoc'h "
-"eus\n"
-"dibabet pe \"Neuziet\" pe \"Mailh\" da renkad staliañ) a zo evel a-heul :\n"
-"\n"
-"  - Boas : dibabit se ma 'z oc'h mennet da implijout ho ardivink dreist-"
-"holl\n"
-"    evit un implij pemdeziek (labour burev, aozerezh grafikoù hag all). Na\n"
-"    c'hortozit ket e vije staliaet nep kempuner, maveg diorren h.a.\n"
-"\n"
-"  - Diorren : evel m'hen diskouez an anv. Dibabit se ma 'z oc'h mennet da\n"
-"    implijout ho ardivink dreist-holl evit diorren meziantoù. Neuze ho po "
-"un\n"
-"    heuliad klok a meziantoù staliet a-benn kempunañ, dizraenañ ha furmadiñ\n"
-"    kod tarzh, pe grouiñ pakadoù meziantel.\n"
-"\n"
-"  - Servijer : dibabit se m'eo gouestlet an ardivink a stalhit Linux-"
-"Mandrake\n"
-"    warnañ da vezañ impliet evel servijer.  ur servijer restroù (NFS pe "
-"SMB),\n"
-"    ur servijer moullañ (moullañ diouzh komenad Unix lp (line printer) pe "
-"zoare\n"
-"    Windows SMB), ur servijer dilesadur (NIS), ur servijer stlennvon hag "
-"all.\n"
-"    Da heul, na c'hortozit staliadur tamm kinkladur ebet (KDE, GNOME...).\n"
-
-#: ../../help.pm_.c:84
-msgid ""
-"DrakX will attempt to look for PCI SCSI adapter(s). If DrakX\n"
-"finds an SCSI adapter and knows which driver to use, it will be "
-"automatically\n"
-"installed.\n"
-"\n"
-"\n"
-"If you have no SCSI adapter, an ISA SCSI adapter or a PCI SCSI adapter that\n"
-"DrakX doesn't recognize, you will be asked if a SCSI adapter is present in "
-"your\n"
-"system. If there is no adapter present, you can click on \"No\". If you "
-"click on\n"
-"\"Yes\", a list of drivers will be presented from which you can select your\n"
-"specific adapter.\n"
-"\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for "
-"the\n"
-"options. This usually works well.\n"
-"\n"
-"\n"
-"If not, you will need to provide options to the driver. Please review the "
-"User\n"
-"Guide (chapter 3, section \"Collective informations on your hardware) for "
-"hints\n"
-"on retrieving this information from hardware documentation, from the\n"
-"manufacturer's Web site (if you have Internet access) or from Microsoft "
-"Windows\n"
-"(if you have it on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:108
-msgid ""
-"At this point, you need to choose where to install your\n"
-"Linux-Mandrake operating system on your hard drive. If it is empty or if an\n"
-"existing operating system uses all the space available on it, you need to\n"
-"partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Linux-Mandrake system.\n"
-"\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced "
-"user.\n"
-"This wizard simplifies this process. Before beginning, please consult the "
-"manual\n"
-"and take your time.\n"
-"\n"
-"\n"
-"You need at least two partitions. One is for the operating system itself and "
-"the\n"
-"other is for the virtual memory (also called Swap).\n"
-"\n"
-"\n"
-"If partitions have been already defined (from a previous installation or "
-"from\n"
-"another partitioning tool), you just need choose those to use to install "
-"your\n"
-"Linux system.\n"
-"\n"
-"\n"
-"If partitions haven't been already defined, you need to create them. \n"
-"To do that, use the wizard available above. Depending of your hard drive\n"
-"configuration, several solutions can be available:\n"
-"\n"
-"\t* Use existing partition: the wizard has detected one or more existing "
-"Linux partitions on your hard drive. If\n"
-"\t  you want to keep them, choose this option. \n"
-"\n"
-"\n"
-"\t* Erase entire disk: if you want delete all data and all partitions "
-"present on your hard drive and replace them by\n"
-"\t  your new Linux-Mandrake system, you can choose this option. Be careful "
-"with this solution, you will not be\n"
-"\t  able to revert your choice after confirmation.\n"
-"\n"
-"\n"
-"\t* Use the free space on the Windows partition: if Microsoft Windows is "
-"installed on your hard drive and takes\n"
-"\t  all space available on it, you have to create free space for Linux data. "
-"To do that you can delete your\n"
-"\t  Microsoft Windows partition and data (see \"Erase entire disk\" or "
-"\"Expert mode\" solutions) or resize your\n"
-"\t  Microsoft Windows partition. Resizing can be performed without loss of "
-"any data. This solution is\n"
-"\t  recommended if you want use both Linux-Mandrake and Microsoft Windows on "
-"same computer.\n"
-"\n"
-"\n"
-"\t  Before choosing this solution, please understand that the size of your "
-"Microsoft\n"
-"\t  Windows partition will be smaller than at present time. It means that "
-"you will have less free space under\n"
-"\t  Microsoft Windows to store your data or install new software.\n"
-"\n"
-"\n"
-"\t* Expert mode: if you want to partition manually your hard drive, you can "
-"choose this option. Be careful before\n"
-"\t  choosing this solution. It is powerful but it is very dangerous. You can "
-"lose all your data very easily. So,\n"
-"\t  don't choose this solution unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:160
-msgid ""
-"At this point, you need to choose what\n"
-"partition(s) to use to install your new Linux-Mandrake system. If "
-"partitions\n"
-"have been already defined (from a previous installation of GNU/Linux or "
-"from\n"
-"another partitioning tool), you can use existing partitions. In other "
-"cases,\n"
-"hard drive partitions must be defined.\n"
-"\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select "
-"the\n"
-"disk for partitioning by clicking on \"hda\" for the first IDE drive, \"hdb"
-"\" for\n"
-"the second or \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-"   * Clear all: this option deletes all partitions available on the selected "
-"hard drive.\n"
-"\n"
-"\n"
-"   * Auto allocate: this option allows you to automatically create Ext2 and "
-"swap partitions in free space of your\n"
-"     hard drive.\n"
-"\n"
-"\n"
-"   * Rescue partition table: if your partition table is damaged, you can try "
-"to recover it using this option. Please\n"
-"     be careful and remember that it can fail.\n"
-"\n"
-"\n"
-"   * Undo: you can use this option to cancel your changes.\n"
-"\n"
-"\n"
-"   * Reload: you can use this option if you wish to undo all changes and "
-"load your initial partitions table\n"
-"\n"
-"\n"
-"   * Wizard: If you wish to use a wizard to partition your hard drive, you "
-"can use this option. It is recommended if\n"
-"     you do not have a good knowledge in partitioning.\n"
-"\n"
-"\n"
-"   * Restore from floppy: if you have saved your partition table on a floppy "
-"during a previous installation, you can\n"
-"     recover it using this option.\n"
-"\n"
-"\n"
-"   * Save on floppy: if you wish to save your partition table on a floppy to "
-"be able to recover it, you can use this\n"
-"     option. It is strongly recommended to use this option\n"
-"\n"
-"\n"
-"   * Done: when you have finished partitioning your hard drive, use this "
-"option to save your changes.\n"
-"\n"
-"\n"
-"For information, you can reach any option using the keyboard: navigate "
-"trough the partitions using Tab and Up/Down arrows.\n"
-"\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-"           * Ctrl-c to create a new partition (when a empty partition is "
-"selected)\n"
-"\n"
-"           * Ctrl-d to delete a partition\n"
-"\n"
-"           * Ctrl-m to set the mount point\n"
-"           \n"
-"\n"
-"           \n"
-"If you are installing on a PPC Machine, you will want to create a small HFS "
-"'bootstrap' partition of at least 1MB for use\n"
-"by the yaboot bootloader. If you opt to make the partition a bit larger, say "
-"50MB, you may find it a useful place to store \n"
-"a spare kernel and ramdisk image for emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Above are listed the existing Linux partitions detected on\n"
-"your hard drive. You can keep choices make by the wizard, they are good for "
-"a\n"
-"common usage. If you change these choices, you must at least define a root\n"
-"partition (\"/\"). Don't choose a too little partition or you will not be "
-"able\n"
-"to install enough software. If you want store your data on a separate "
-"partition,\n"
-"you need also to choose a \"/home\" (only possible if you have more than "
-"one\n"
-"Linux partition available).\n"
-"\n"
-"\n"
-"For information, each partition is listed as follows: \"Name\", \"Capacity"
-"\".\n"
-"\n"
-"\n"
-"\"Name\" is coded as follow: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and "
-"\"sd\"\n"
-"if it is an SCSI hard drive.\n"
-"\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE "
-"hard drives:\n"
-"\n"
-"   * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-"   * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"\n"
-"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means "
-"\"secondary hard drive\", etc..."
-msgstr ""
-
-#: ../../help.pm_.c:258
-msgid ""
-"Choose the hard drive you want to erase to install your\n"
-"new Linux-Mandrake partition. Be careful, all data present on it will be "
-"lost\n"
-"and will not be recoverable."
-msgstr ""
-
-#: ../../help.pm_.c:263
-msgid ""
-"Click on \"OK\" if you want to delete all data and\n"
-"partitions present on this hard drive. Be careful, after clicking on \"OK\", "
-"you\n"
-"will not be able to recover any data and partitions present on this hard "
-"drive,\n"
-"including any Windows data.\n"
-"\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../help.pm_.c:273
-msgid ""
-"More than one Microsoft Windows partition have been\n"
-"detected on your hard drive. Please choose the one you want resize to "
-"install\n"
-"your new Linux-Mandrake operating system.\n"
-"\n"
-"\n"
-"For information, each partition is listed as follow; \"Linux name\", "
-"\"Windows\n"
-"name\" \"Capacity\".\n"
-"\n"
-"\"Linux name\" is coded as follow: \"hard drive type\", \"hard drive number"
-"\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and \"sd"
-"\"\n"
-"if it is an SCSI hard drive.\n"
-"\n"
-"\n"
-"\"Hard drive number\" is always a letter putted after \"hd\" or \"sd\". With "
-"IDE hard drives:\n"
-"\n"
-"   * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-"   * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means "
-"\"secondary hard drive\", etc.\n"
-"\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first "
-"disk\n"
-"or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:306
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:309
-msgid ""
-"Any partitions that have been newly defined must be\n"
-"formatted for use (formatting meaning creating a filesystem).\n"
-"\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to "
-"erase\n"
-"the data they contain. If you wish do that, please also select the "
-"partitions\n"
-"you want to format.\n"
-"\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing "
-"partitions.\n"
-"You must reformat the partitions containing the operating system (such as \"/"
-"\",\n"
-"\"/usr\" or \"/var\") but do you no have to reformat partitions containing "
-"data\n"
-"that you wish to keep (typically /home).\n"
-"\n"
-"\n"
-"Please be careful selecting partitions, after formatting, all data will be\n"
-"deleted and you will not be able to recover any of them.\n"
-"\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"\n"
-"Click on \"Cancel\" if you want to choose other partitions to install your "
-"new\n"
-"Linux-Mandrake operating system."
-msgstr ""
-
-#: ../../help.pm_.c:335
-#, fuzzy
-msgid ""
-"You may now select the group of packages you wish to\n"
-"install or upgrade.\n"
-"\n"
-"\n"
-"DrakX will then check whether you have enough room to install them all. If "
-"not,\n"
-"it will warn you about it. If you want to go on anyway, it will proceed onto "
-"the\n"
-"installation of all selected groups but will drop some packages of lesser\n"
-"interest. At the bottom of the list you can select the option \n"
-"\"Individual package selection\"; in this case you will have to browse "
-"through\n"
-"more than 1000 packages..."
-msgstr ""
-"Gallout a rit bremañ diuz ar strollad pakadoù a vennit\n"
-"staliañ pe vremanaat.\n"
-"\n"
-"DrakX a glasko neuze hag-eñ hoc'h eus egor a-walc'h evit staliañ an holl "
-"anezho.\n"
-"Ma n'hoc'h eus ket, e kemenno deoc'h. Ma vennit kenderc'hel evelato, e "
-"seveno staliadur\n"
-"an holl strolladoù diuzet hogen e laosko pakadoù 'zo dezho nebeutoc'h a\n"
-"dalvoudegezh. E traoñ ar roll e c'hellit diuz an dibarzh\n"
-"\"Diuz pakadoù unan hag unan\" ; en degouezh-se e vo ret deoc'h furchal\n"
-"a-dreuz tremen 1000 pakad..."
-
-#: ../../help.pm_.c:347
-msgid ""
-"You can now choose individually all the packages you\n"
-"wish to install.\n"
-"\n"
-"\n"
-"You can expand or collapse the tree by clicking on options in the left "
-"corner of\n"
-"the packages window.\n"
-"\n"
-"\n"
-"If you prefer to see packages sorted in alphabetic order, click on the icon\n"
-"\"Toggle flat and group sorted\".\n"
-"\n"
-"\n"
-"If you want not to be warned on dependencies, click on \"Automatic\n"
-"dependencies\". If you do this, note that unselecting one package may "
-"silently\n"
-"unselect several other packages which depend on it."
-msgstr ""
-
-#: ../../help.pm_.c:364
-#, fuzzy
-msgid ""
-"If you have all the CDs in the list above, click Ok. If you have\n"
-"none of those CDs, click Cancel. If only some CDs are missing, unselect "
-"them,\n"
-"then click Ok."
-msgstr ""
-"M'hoc'h eus an holl CDoù er roll a-is, gwaskit Mat eo.\n"
-"Ma n'hoc'h eus hini eus ar CDoù-se, gwaskit Nullañ.\n"
-"Ma fazi deoc'h lod eus ar CDoù, andiuzit anezho ha gwaskit Mat eo."
-
-#: ../../help.pm_.c:369
-msgid ""
-"Your new Linux-Mandrake operating system is currently being\n"
-"installed. This operation should take a few minutes (it depends on size you\n"
-"choose to install and the speed of your computer).\n"
-"\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:377
-msgid ""
-"You can now test your mouse. Use buttons and wheel to verify\n"
-"if settings are good. If not, you can click on \"Cancel\" to choose another\n"
-"driver."
-msgstr ""
-
-#: ../../help.pm_.c:382
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1\n"
-"port under MS Windows is named ttyS0 under GNU/Linux."
-msgstr ""
-"Diuzit ar porzh a zere mar plij. Da skouer, porzh COM1 dindan MS Windows\n"
-"a vez anvet ttyS0 gant Linux."
-
-#: ../../help.pm_.c:386
-msgid ""
-"If you wish to connect your computer to the Internet or\n"
-"to a local network please choose the correct option. Please turn on your "
-"device\n"
-"before choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"\n"
-"If you do not have any connection to the Internet or a local network, "
-"choose\n"
-"\"Disable networking\".\n"
-"\n"
-"\n"
-"If you wish to configure the network later after installation or if you "
-"have\n"
-"finished to configure your network connection, choose \"Done\"."
-msgstr ""
-
-#: ../../help.pm_.c:399
-msgid ""
-"No modem has been detected. Please select the serial port on which it is "
-"plugged.\n"
-"\n"
-"\n"
-"For information, the first serial port (called \"COM1\" under Microsoft\n"
-"Windows) is called \"ttyS0\" under Linux."
-msgstr ""
-
-#: ../../help.pm_.c:406
-msgid ""
-"You may now enter dialup options. If you don't know\n"
-"or are not sure what to enter, the correct informations can be obtained "
-"from\n"
-"your Internet Service Provider. If you do not enter the DNS (name server)\n"
-"information here, this information will be obtained from your Internet "
-"Service\n"
-"Provider at connection time."
-msgstr ""
-
-#: ../../help.pm_.c:413
-msgid ""
-"If your modem is an external modem, please turn on it now to let DrakX "
-"detect it automatically."
-msgstr ""
-
-#: ../../help.pm_.c:416
-msgid "Please turn on your modem and choose the correct one."
-msgstr ""
-
-#: ../../help.pm_.c:419
-msgid ""
-"If you are not sure if informations above are\n"
-"correct or if you don't know or are not sure what to enter, the correct\n"
-"informations can be obtained from your Internet Service Provider. If you do "
-"not\n"
-"enter the DNS (name server) information here, this information will be "
-"obtained\n"
-"from your Internet Service Provider at connection time."
-msgstr ""
-
-#: ../../help.pm_.c:426
-#, fuzzy
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, the correct informations can be\n"
-"obtained from your Internet Service Provider."
-msgstr ""
-"Gallout a rit bremañ skrivañ dibarzhoù sifrennañ. Ma n'oc'h ket sur petra\n"
-"skrivañ, an titouroù reizh ho po digant ho PMG."
-
-#: ../../help.pm_.c:431
-#, fuzzy
-msgid ""
-"You may now configure your network device.\n"
-"\n"
-"   * IP address: if you don't know or are not sure what to enter, ask your "
-"network administrator.\n"
-"     You should not enter an IP address if you select the option \"Automatic "
-"IP\" below.\n"
-"\n"
-"   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-"know or are not sure what to enter,\n"
-"     ask your network administrator.\n"
-"\n"
-"   * Automatic IP: if your network uses BOOTP or DHCP protocol, select this "
-"option. If selected, no value is needed in\n"
-"    \"IP address\". If you don't know or are not sure if you need to select "
-"this option, ask your network administrator."
-msgstr ""
-"Skrivit :\n"
-"\n"
-"  - Chomlec'h IP : m'eo dianav deoc'h, goulennit digant merour ho rouedad.\n"
-"\n"
-"\n"
-"  - Rouedmaskl : \"255.255.255.0\" a zo peurvuiañ un dibab mat. M'hoc'h eus\n"
-"douetañs, goulennit digant merour ho rouedad.\n"
-"\n"
-"\n"
-"  - IP emgefreek : Ma ra ho rouedad gant ar c'homenad bootp pe dhcp, "
-"diuzit \n"
-"an dibarzh-se. Ma vez diuzet, n'eus ezhomm talvoud ebet er \"Chomlec'h IP"
-"\".\n"
-"M'hoc'h eus douetañs, goulennit digant merour ho rouedad.\n"
-
-#: ../../help.pm_.c:443
-#, fuzzy
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, ask your network administrator."
-msgstr ""
-"Ma implij ho rouedad NIS, diuzit \"Implijout NIS\". Ma ne ouzit ket, "
-"goulennit\n"
-"digant merour ho rouedad."
-
-#: ../../help.pm_.c:447
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, leave blank."
-msgstr ""
-
-#: ../../help.pm_.c:451
-msgid ""
-"You may now enter dialup options. If you're not sure what to enter, the\n"
-"correct information can be obtained from your ISP."
-msgstr ""
-"Gallout a rit bremañ skrivañ dibarzhoù sifrennañ. Ma n'oc'h ket sur petra\n"
-"skrivañ, an titouroù reizh ho po digant ho PMG."
-
-#: ../../help.pm_.c:455
-msgid ""
-"If you will use proxies, please configure them now. If you don't know if\n"
-"you should use proxies, ask your network administrator or your ISP."
-msgstr ""
-"Ma implijit proksioù, keflugnit anezho bremañ mar plij. Ma ne ouzit ket hag\n"
-"e rankit implijout proksioù, goulennit digant merour ho rouedad pe ho PMG."
-
-#: ../../help.pm_.c:459
-#, fuzzy
-msgid ""
-"You can install cryptographic package if your internet connection has been\n"
-"set up correctly. First choose a mirror where you wish to download packages "
-"and\n"
-"after that select the packages to install.\n"
-"\n"
-"\n"
-"Note you have to select mirror and cryptographic packages according\n"
-"to your legislation."
-msgstr ""
-"Staliañ pakadoù rinegouriezh a c'hellit m'eo bet kefluniet reizh ho\n"
-"kevreadenn ouzh ar Genrouedad. Dibabit da gentañ ur melezour a vennit "
-"ezkargañ\n"
-"pakadoù diwarnañ ha da c'houde diuzit ar pakadoù da staliañ.\n"
-"\n"
-"Taolit evezh e rankit diuz ar melezour hag ar rinegouriezh hervez al\n"
-"lezennoù o ren du-se."
-
-#: ../../help.pm_.c:468
-msgid "You can now select your timezone according to where you live."
-msgstr ""
-
-#: ../../help.pm_.c:471
-#, fuzzy
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage\n"
-"Time) and translates it in local time according to the time zone you have\n"
-"selected.\n"
-"\n"
-"\n"
-"If you use Microsoft Windows on this computer, choose \"No\"."
-msgstr ""
-"Bremañ e c'hellit diuz ho takad-eur diouzh al lec'h ma chomit ennañ.\n"
-"\n"
-"\n"
-"Linux a vera an eur e GMT pe \"Greenwich Mean Time\" hag e amdreiñ a ra\n"
-"en eur lec'hel hervez an takad-eur hoc'h eus diuzet."
-
-#: ../../help.pm_.c:479
-#, fuzzy
-msgid ""
-"You may now choose which services you want to start at boot time.\n"
-"\n"
-"\n"
-"When your mouse comes over an item, a small balloon help will popup which\n"
-"describes the role of the service.\n"
-"\n"
-"\n"
-"Be very careful in this step if you intend to use your machine as a server: "
-"you\n"
-"will probably want not to start any services that you don't need. Please\n"
-"remember that several services can be dangerous if they are enable on a "
-"server.\n"
-"In general, select only the services that you really need."
-msgstr ""
-"Bremañ e c'hellit diuz pe servijoù a vennit e vije lañset pa loc'her.\n"
-"Pa zeu ho logodenn war un draez, ul lagadenn skoazell a zeuio war wel hag\n"
-"a zisplego pal ar servij-se.\n"
-"\n"
-"Bezit aketuz-kenañ el lankad-mañ ma vennit implijout ho ardivink evel ur\n"
-"servijer : mennout a rit emichañs chom hep loc'hañ kement servij n'ho peus "
-"ket\n"
-"c'hoant."
-
-#: ../../help.pm_.c:492
-msgid ""
-"You can configure a local printer (connected to your computer) or remote\n"
-"printer (accessible via a Unix, Netware or Microsoft Windows network)."
-msgstr ""
-
-#: ../../help.pm_.c:496
-msgid ""
-"If you wish to be able to print, please choose one printing system between\n"
-"CUPS and LPR.\n"
-"\n"
-"\n"
-"CUPS is a new, powerful and flexible printing system for Unix systems (CUPS\n"
-"means \"Common Unix Printing System\"). It is the default printing system "
-"in\n"
-"Linux-Mandrake.\n"
-"\n"
-"\n"
-"LPR is the old printing system used in previous Linux-Mandrake "
-"distributions.\n"
-"\n"
-"\n"
-"If you don't have printer, click on \"None\"."
-msgstr ""
-
-#: ../../help.pm_.c:511
-msgid ""
-"GNU/Linux can deal with many types of printer. Each of these types requires\n"
-"a different setup.\n"
-"\n"
-"\n"
-"If your printer is physically connected to your computer, select \"Local\n"
-"printer\".\n"
-"\n"
-"\n"
-"If you want to access a printer located on a remote Unix machine, select\n"
-"\"Remote printer\".\n"
-"\n"
-"\n"
-"If you want to access a printer located on a remote Microsoft Windows "
-"machine\n"
-"(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-msgstr ""
-
-#: ../../help.pm_.c:527
-msgid ""
-"Please turn on your printer before continuing to let DrakX detect it.\n"
-"\n"
-"You have to enter some informations here.\n"
-"\n"
-"\n"
-"   * Name of printer: the print spooler uses \"lp\" as default printer name. "
-"So, you must have a printer named \"lp\".\n"
-"     If you have only one printer, you can use several names for it. You "
-"just need to separate them by a pipe\n"
-"     character (a \"|\"). So, if you prefer a more meaningful name, you have "
-"to put it first, eg: \"My printer|lp\".\n"
-"     The printer having \"lp\" in its name(s) will be the default printer.\n"
-"\n"
-"\n"
-"   * Description: this is optional but can be useful if several printers are "
-"connected to your computer or if you allow\n"
-"     other computers to access to this printer.\n"
-"\n"
-"\n"
-"   * Location: if you want to put some information on your\n"
-"     printer location, put it here (you are free to write what\n"
-"     you want, for example \"2nd floor\").\n"
-msgstr ""
-
-#: ../../help.pm_.c:548
-msgid ""
-"You need to enter some informations here.\n"
-"\n"
-"\n"
-"   * Name of queue: the print spooler uses \"lp\" as default printer name. "
-"So, you need have a printer named \"lp\".\n"
-"    If you have only one printer, you can use several names for it. You just "
-"need to separate them by a pipe\n"
-"    character (a \"|\"). So, if you prefer to have a more meaningful name, "
-"you have to put it first, eg: \"My printer|lp\".\n"
-"    The printer having \"lp\" in its name(s) will be the default printer.\n"
-"\n"
-"  \n"
-"   * Spool directory: it is in this directory that printing jobs are stored. "
-"Keep the default choice\n"
-"     if you don't know what to use\n"
-"\n"
-"\n"
-"   * Printer Connection: If your printer is physically connected to your "
-"computer, select \"Local printer\".\n"
-"     If you want to access a printer located on a remote Unix machine, "
-"select \"Remote lpd printer\".\n"
-"\n"
-"\n"
-"     If you want to access a printer located on a remote Microsoft Windows "
-"machine (or on Unix machine using SMB\n"
-"     protocol), select \"SMB/Windows 95/98/NT\".\n"
-"\n"
-"\n"
-"     If you want to acces a printer located on NetWare network, select "
-"\"NetWare\".\n"
-msgstr ""
-
-#: ../../help.pm_.c:573
-msgid ""
-"Your printer has not been detected. Please enter the name of the device on\n"
-"which it is connected.\n"
-"\n"
-"\n"
-"For information, most printers are connected on the first parallel port. "
-"This\n"
-"one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-"Windows."
-msgstr ""
-
-#: ../../help.pm_.c:581
-msgid "You must now select your printer in the above list."
-msgstr ""
-
-#: ../../help.pm_.c:584
-msgid ""
-"Please select the right options according to your printer.\n"
-"Please see its documentation if you don't know what choose here.\n"
-"\n"
-"\n"
-"You will be able to test your configuration in next step and you will be "
-"able to modify it if it doesn't work as you want."
-msgstr ""
-
-#: ../../help.pm_.c:591
-#, fuzzy
-msgid ""
-"You can now enter the root password for your Linux-Mandrake system.\n"
-"The password must be entered twice to verify that both password entries are "
-"identical.\n"
-"\n"
-"\n"
-"Root is the system's administrator and is the only user allowed to modify "
-"the\n"
-"system configuration. Therefore, choose this password carefully. \n"
-"Unauthorized use of the root account can be extemely dangerous to the "
-"integrity\n"
-"of the system, its data and other system connected to it.\n"
-"\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. It should never be written down.\n"
-"\n"
-"\n"
-"Do not make the password too long or complicated, though: you must be able "
-"to\n"
-"remember it without too much effort."
-msgstr ""
-"Bremañ e c'hellit skrivañ an tremenger root evit ho reizhiad\n"
-"Linux-Mandrake. An tremenger a zle bezañ roet div wech evit\n"
-"gwiriañ m'eo skrivet heñvel an div wech.\n"
-"\n"
-"\n"
-"Merour ar reizhiad eo root, hag eñ eo an arveriad nemetañ aotreet\n"
-"da gemmañ kefluniadur ar reizhad. Rak se, dibabit an tremenger-se\n"
-"gant aket ! Dañjerus-kenañ e c'hell bezañ un implij nann aotreet\n"
-"ar gont root evit anterinded ar reizhiad hag e roadoù, hag ar\n"
-"reizhiadoù all kevreet outañ. An tremenger a zlefe bezañ ur meskaj\n"
-"a lizherennoù alfaniverel, ennañ 8 arouezenn d'an nebeutañ. Ne\n"
-"zlefe BIKEN bezañ lakaet dre skrid. Na rit ket a dremenger re hir\n"
-"pe re luziet, memestra : dav eo deoc'h kaout soñj anezhañ hep re a\n"
-"strivoù."
-
-#: ../../help.pm_.c:609
-msgid ""
-"To enable a more secure system, you should select \"Use shadow file\" and\n"
-"\"Use MD5 passwords\"."
-msgstr ""
-"Evit sevel ur reizhiad suroc'h, gwelloc'h deoc'h diuz \"Implijout ur restr "
-"kuzhet\"\n"
-"hag \"Implijout tremegerioù MD5\"."
-
-#: ../../help.pm_.c:613
-msgid ""
-"If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n"
-"network administrator."
-msgstr ""
-"Ma implij ho rouedad NIS, diuzit \"Implijout NIS\". Ma ne ouzit ket, "
-"goulennit\n"
-"digant merour ho rouedad."
-
-#: ../../help.pm_.c:617
-msgid ""
-"You may now create one or more \"regular\" user account(s), as\n"
-"opposed to the \"privileged\" user account, root. You can create\n"
-"one or more account(s) for each person you want to allow to use\n"
-"the computer. Note that each user account will have its own\n"
-"preferences (graphical environment, program settings, etc.)\n"
-"and its own \"home directory\", in which these preferences are\n"
-"stored.\n"
-"\n"
-"\n"
-"First of all, create an account for yourself! Even if you will be the only "
-"user\n"
-"of the machine, you may NOT connect as root for daily use of the system: "
-"it's a\n"
-"very high security risk. Making the system unusable is very often a typo "
-"away.\n"
-"\n"
-"\n"
-"Therefore, you should connect to the system using the user account\n"
-"you will have created here, and login as root only for administration\n"
-"and maintenance purposes."
-msgstr ""
-"Bremañ e c'hellit krouiñ unan pe vuioc'h a gont(où) arveriad \"boutin\",\n"
-"dre enebiez ouzh ar gont arveriad \"dreistwiriet\", root hec'h anv. Gallout\n"
-"a rit krouiñ unan pe vuioc'h a gont(où) evit kement den a fell deoc'h\n"
-"aotren da implijout an urzhiataer. Taolit evezh pep kont arveriad he\n"
-"devo he dibarzhoù dezhi (endro grafikel, kefluniadur ar goulevioù,\n"
-"h.a.) hag he renkell \"Er-gêr\" dezhi, ma vo enrollet an dibarzhoù-se\n"
-"enni.\n"
-"\n"
-"\n"
-"Da gentañ holl, krouit ur gont evidoc'h-chwi ! Ha pa vefec'h arveriad "
-"nemetañ\n"
-"an ardivink, ARABAT deoc'h ereañ evel root evit implij pemdeziek ar "
-"reizhiad : \n"
-"arvarus-kenañ eo a-fet surentez. Ur fazi stokell a zo a-walc'h evit lakaat\n"
-"boud ho reizhiad.\n"
-"\n"
-"\n"
-"Gant se, gwelloc'h vije deoc'h ereañ ouzh ar reizhiad en ur implijout ar\n"
-"gont arveriad ho po krouet amañ, hag ereañ evel root evit kefridioù a\n"
-"vererezh ha trezerc'hel hepken."
-
-#: ../../help.pm_.c:636
-msgid ""
-"Creating a boot disk is strongly recommended. If you can't\n"
-"boot your computer, it's the only way to rescue your system without\n"
-"reinstalling it."
-msgstr ""
-
-#: ../../help.pm_.c:641
-#, fuzzy
-msgid ""
-"You need to indicate where you wish\n"
-"to place the information required to boot to GNU/Linux.\n"
-"\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of\n"
-"drive (MBR)\"."
-msgstr ""
-"Ret eo deoc'h menegiñ pelec'h e mennit\n"
-"lec'hiañ an titouroù ret evit loc'hañ Linux.\n"
-"\n"
-"\n"
-"Nemet ma ouifec'h resis ar pezh a rit, dibabit \"Rann gentañ\n"
-"ar bladenn (MBR)\"."
-
-#: ../../help.pm_.c:649
-msgid ""
-"Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-" (primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-msgstr ""
-"Nemet ma ouifec'h a-zevri ez eo disheñvel, \"/dev/hda\" eo an dibab boas\n"
-"(pladenn IDE mestr kentañ) pe \"/dev/sda\" (pladenn SCSI kentañ)."
-
-#: ../../help.pm_.c:653
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and Grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"You may also want not to give access to these other operating systems to\n"
-"anyone, in which case you can delete the corresponding entries. But\n"
-"in this case, you will need a boot disk in order to boot them!"
-msgstr ""
-"LILO (the LInux LOader) ha Grub a zo kargerien loc'hañ : barrek int da "
-"loc'hañ\n"
-"pe Linux pe forzh pe reizhiad korvoiñ all bezañt war ho urzhiataer.\n"
-"Peurvuiañ, ar reizhiadoù korvoiñ all-se a vez dinoet ha staliet reizh.\n"
-"Ma n'eo ket kont evel-hen, gallout a rit ouzhpennañ un enmont gant an dorn\n"
-"er skramm-mañ. Taolit pled da zibab an arventennoù reizh.\n"
-"\n"
-"\n"
-"Gallout a rafec'h ivez mennout na lakaat hegerz hini ebet eus ar reizhiadoù\n"
-"korvoiñ-se, neuze n'hoc'h eus ken nemet dilemel an enmontoù a zegouezh. "
-"Hogen\n"
-"neuze e vo ret deoc'h kaout ur bladennig loc'hañ evit loc'hañ anezho."
-
-#: ../../help.pm_.c:665
-#, fuzzy
-msgid ""
-"LILO and grub main options are:\n"
-"  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-"partition) that contains the boot sector. Unless you know specifically\n"
-"otherwise, choose \"/dev/hda\".\n"
-"\n"
-"\n"
-"  - Delay before booting default image: Specifies the number in tenths\n"
-"of a second the boot loader should wait before booting the first image.\n"
-"This is useful on systems that immediately boot from the hard disk after\n"
-"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-"omitted or is set to zero.\n"
-"\n"
-"\n"
-"  - Video mode: This specifies the VGA text mode that should be selected\n"
-"when booting. The following values are available: \n"
-"\n"
-"    * normal: select normal 80x25 text mode.\n"
-"\n"
-"    * <number>:  use the corresponding text mode.\n"
-"\n"
-"\n"
-"  - Clean \"/tmp\" at each boot: if you want delete all files and "
-"directories\n"
-"stored in \"/tmp\" when you boot your system, select this option.\n"
-"\n"
-"\n"
-"  - Precise RAM if needed: unfortunately, there is no standard method to ask "
-"the\n"
-"BIOS about the amount of RAM present in your computer. As consequence, Linux "
-"may\n"
-"fail to detect your amount of RAM correctly. If this is the case, you can\n"
-"specify the correct amount or RAM here. Please note that a difference of 2 "
-"or 4\n"
-"MB between detected memory and memory present in your system is normal."
-msgstr ""
-"Setu dibaboù pennañ LILO ha grub :\n"
-"  - Trobarzhell loc'hañ : a dermen anv an drobarzhell (da sk. parzhadur\n"
-"ur bladenn galet) a zo enni ar rann loc'hañ. Nemet ma ouifec'h a-zevri\n"
-"ez eo disheñvel, dibabit \"/dev/hda\".\n"
-"\n"
-"\n"
-"  - Gedvezh a-raok loc'hañ ar skeudenn dre ziouer : a spisa an niver a\n"
-"zekvet eilennoù a rankfe gortoz ar c'harger loc'hañ kent loc'hañ ar "
-"skeudenn\n"
-"gentañ. Talvoudus eo war reizhiadoù a loc'h diouzhtu adalek ar bladenn "
-"galet\n"
-"goude bezañ enaouet ar stokellaoueg. Ne gortoz ket ar c'harger loc'hañ m'eo\n"
-"disoñjet \"gedvezh\" pe dermenet da mann.\n"
-"\n"
-"\n"
-"  - Mod video : a spisa ar mod skrid VGA a rankfe bezañ diuzet pa loc'her.\n"
-"An talvoudoù a heul a zo hegerz :\n"
-"    * boas : a ziuz ar mod skrid 80x25 boas.\n"
-"    * <niver> : a implij ar mod skrid a zegouezh."
-
-#: ../../help.pm_.c:697
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n"
-"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"Yaboot main options are:\n"
-"\n"
-"\n"
-"  - Init Message: A simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-"\n"
-"  - Boot Device: Indicate where you want to place the information required "
-"to \n"
-"boot to GNU/Linux. Generally, you will have setup a bootstrap partition "
-"earlier \n"
-"to hold this information.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: Unlike LILO, there are two delays available with \n"
-"yaboot.  The first delay is measured in seconds and at this point you can \n"
-"choose between CD, OF boot, MacOS, or Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: This timeout is similar to the LILO boot delay.  "
-"After \n"
-"selecting Linux, you will have this delay in 0.1 seconds before your "
-"default\n"
-"kernel description is selected.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: Checking this option will allow you to choose 'C' for "
-"CD at\n"
-"the first boot prompt.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: Checking this option will allow you to choose 'N' for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-"\n"
-"  - Default OS: You can select which OS will boot by default when the Open "
-"Firmware \n"
-"Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:738
-msgid ""
-"You can add additional entries for yaboot, either for other operating "
-"systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"\n"
-"For other OS's - the entry consists only of a label and the root partition.\n"
-"\n"
-"\n"
-"For Linux, there are a few possible options: \n"
-"\n"
-"\n"
-"  - Label: This is simply the name will type at the yaboot prompt to select "
-"this \n"
-"boot option.\n"
-"\n"
-"\n"
-"  - Image: This would be the name of the kernel to boot.  Typically vmlinux "
-"or\n"
-"a variation of vmlinux with an extension.\n"
-"\n"
-"\n"
-"  - Root: The root device or '/' for your Linux installation.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: On Apple hardware, the kernel append option is used quite often "
-"to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button "
-"emulation\n"
-"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The "
-"following \n"
-"are some examples:\n"
-"\n"
-"\n"
-"\t\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: This option can be used either to load initial modules, before "
-"the boot \n"
-"device is available, or to load a ramdisk image for an emergency boot "
-"situation.\n"
-"\n"
-"\n"
-"  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you "
-"should need\n"
-"to allocate a large ramdisk, this option can be used.\n"
-"\n"
-"\n"
-"  - Read-write: Normally the 'root' partition is initially brought up read-"
-"only, to allow\n"
-"a filesystem check before the system becomes 'live'.  You can override this "
-"option here.\n"
-"\n"
-"\n"
-"  - NoVideo: Should the Apple video hardware prove to be exceptionally "
-"problematic, you can\n"
-"select this option to boot in 'novideo' mode, with native framebuffer "
-"support.\n"
-"\n"
-"\n"
-"  - Default: Selects this entry as being the default Linux selection, "
-"selectable by just\n"
-"pressing ENTER at the yaboot prompt.  This entry will also be highlighted "
-"with a '*', if you\n"
-"press TAB to see the boot selections."
-msgstr ""
-
-#: ../../help.pm_.c:793
-#, fuzzy
-msgid ""
-"SILO is a bootloader for SPARC: it is able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"You may also want not to give access to these other operating systems to\n"
-"anyone, in which case you can delete the corresponding entries. But\n"
-"in this case, you will need a boot disk in order to boot them!"
-msgstr ""
-"LILO (the LInux LOader) ha Grub a zo kargerien loc'hañ : barrek int da "
-"loc'hañ\n"
-"pe Linux pe forzh pe reizhiad korvoiñ all bezañt war ho urzhiataer.\n"
-"Peurvuiañ, ar reizhiadoù korvoiñ all-se a vez dinoet ha staliet reizh.\n"
-"Ma n'eo ket kont evel-hen, gallout a rit ouzhpennañ un enmont gant an dorn\n"
-"er skramm-mañ. Taolit pled da zibab an arventennoù reizh.\n"
-"\n"
-"\n"
-"Gallout a rafec'h ivez mennout na lakaat hegerz hini ebet eus ar reizhiadoù\n"
-"korvoiñ-se, neuze n'hoc'h eus ken nemet dilemel an enmontoù a zegouezh. "
-"Hogen\n"
-"neuze e vo ret deoc'h kaout ur bladennig loc'hañ evit loc'hañ anezho."
-
-#: ../../help.pm_.c:805
-#, fuzzy
-msgid ""
-"SILO main options are:\n"
-"  - Bootloader installation: Indicate where you want to place the\n"
-"information required to boot to GNU/Linux. Unless you know exactly\n"
-"what you are doing, choose \"First sector of drive (MBR)\".\n"
-"\n"
-"\n"
-"  - Delay before booting default image: Specifies the number in tenths\n"
-"of a second the boot loader should wait before booting the first image.\n"
-"This is useful on systems that immediately boot from the hard disk after\n"
-"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-"omitted or is set to zero."
-msgstr ""
-"Setu dibaboù pennañ LILO ha grub :\n"
-"  - Trobarzhell loc'hañ : a dermen anv an drobarzhell (da sk. parzhadur\n"
-"ur bladenn galet) a zo enni ar rann loc'hañ. Nemet ma ouifec'h a-zevri\n"
-"ez eo disheñvel, dibabit \"/dev/hda\".\n"
-"\n"
-"\n"
-"  - Gedvezh a-raok loc'hañ ar skeudenn dre ziouer : a spisa an niver a\n"
-"zekvet eilennoù a rankfe gortoz ar c'harger loc'hañ kent loc'hañ ar "
-"skeudenn\n"
-"gentañ. Talvoudus eo war reizhiadoù a loc'h diouzhtu adalek ar bladenn "
-"galet\n"
-"goude bezañ enaouet ar stokellaoueg. Ne gortoz ket ar c'harger loc'hañ m'eo\n"
-"disoñjet \"gedvezh\" pe dermenet da mann.\n"
-"\n"
-"\n"
-"  - Mod video : a spisa ar mod skrid VGA a rankfe bezañ diuzet pa loc'her.\n"
-"An talvoudoù a heul a zo hegerz :\n"
-"    * boas : a ziuz ar mod skrid 80x25 boas.\n"
-"    * <niver> : a implij ar mod skrid a zegouezh."
-
-#: ../../help.pm_.c:818
-#, fuzzy
-msgid ""
-"Now it's time to configure the X Window System, which is the\n"
-"core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-"you must configure your video card and monitor. Most of these\n"
-"steps are automated, though, therefore your work may only consist\n"
-"of verifying what has been done and accept the settings :)\n"
-"\n"
-"\n"
-"When the configuration is over, X will be started (unless you\n"
-"ask DrakX not to) so that you can check and see if the\n"
-"settings suit you. If they don't, you can come back and\n"
-"change them, as many times as necessary."
-msgstr ""
-"Bremañ eo poent kefluniañ ar reizhiad X Window, a zo kraonienn\n"
-"EGA (Etrefas Grafikel Arveriad) Linux. Evit ar c'hefridi-se, ret eo\n"
-"deoc'h kefluniañ ho kartenn grafek hag ho skramm. Emgefreek eo ar bras\n"
-"eus al lankadoù-se, evelato, neuze gwiriañ pezh a zo bet graet hag\n"
-"asantiñ d'ar c'hefluniadur a zlefe bezañ ho labour :)\n"
-"\n"
-"\n"
-"Pa 'z eo graet ar c'hefluniañ, lañset e vo X (nemet ma c'houlennit\n"
-"digant DrakX chom hep hen ober) e seurt ma c'hellit gwiriañ ha\n"
-"sellet ha plijet oc'h gant an dibarzhoù. Ma n'oc'h ket, e c'hellit\n"
-"mont war gil hag o c'hemmañ, ken lies gwech ha ma karot."
-
-#: ../../help.pm_.c:831
-msgid ""
-"If something is wrong in X configuration, use these options to correctly\n"
-"configure the X Window System."
-msgstr ""
-"M'eo siek un dra bennak en ho kefluniadur X, implijit an dibarzhoù-se\n"
-"a-benn kefluniañ reizh ar reizhiad X Window."
-
-#: ../../help.pm_.c:835
-msgid ""
-"If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n"
-"\"No\"."
-msgstr ""
-"Ma kavit gwelloc'h implijout un ereadur grafikel, diuzit \"Ya\". Mod all,\n"
-"diuzit \"Ket\"."
-
-#: ../../help.pm_.c:839
-msgid ""
-"You can choose a security level for your system. Please refer to the manual "
-"for complete\n"
-"  information. Basically, if you don't know what to choose, keep the default "
-"option.\n"
-msgstr ""
-
-#: ../../help.pm_.c:844
-msgid ""
-"Your system is going to reboot.\n"
-"\n"
-"After rebooting, your new Linux Mandrake system will load automatically.\n"
-"If you want to boot into another existing operating system, please read\n"
-"the additional instructions."
-msgstr ""
-"Emañ ho reizhiad war-nes adloc'hañ.\n"
-"\n"
-"Goude adloc'hañ, kargañ a raio ho reizhiad Linux Mandrake nevez ent "
-"emgefreek.\n"
-"Ma vennit loc'hañ ur reizhiad korvoiñ all, lennit ar gourc'hemennoù "
-"ouzhpenn\n"
-"mar plij."
-
-#: ../../install2.pm_.c:37
-msgid "Choose your language"
-msgstr "Dibabit ho yezh"
-
-#: ../../install2.pm_.c:38
-msgid "Select installation class"
-msgstr "Diuzit renkad ar staliadur"
-
-#: ../../install2.pm_.c:39
-msgid "Hard drive detection"
-msgstr "Dinoiñ ar bladenn galet"
-
-#: ../../install2.pm_.c:40
-msgid "Configure mouse"
-msgstr "Kefluniañ al logodenn"
-
-#: ../../install2.pm_.c:41
-msgid "Choose your keyboard"
-msgstr "Dibabit ho stokellaoueg"
-
-#: ../../install2.pm_.c:42
-#, fuzzy
-msgid "Security"
-msgstr "rodellek"
-
-#: ../../install2.pm_.c:43
-msgid "Setup filesystems"
-msgstr "Kefluniañ reizhiadoù restroù"
-
-#: ../../install2.pm_.c:44
-msgid "Format partitions"
-msgstr "Furmadiñ parzhadurioù"
-
-#: ../../install2.pm_.c:45
-msgid "Choose packages to install"
-msgstr "Dibabit pakadoù da staliañ"
-
-#: ../../install2.pm_.c:46
-msgid "Install system"
-msgstr "Staliañ ar reizhiad"
-
-#: ../../install2.pm_.c:47 ../../install_steps_interactive.pm_.c:894
-#: ../../install_steps_interactive.pm_.c:895
-msgid "Set root password"
-msgstr "Termeniñ tremenger root"
-
-#: ../../install2.pm_.c:48
-msgid "Add a user"
-msgstr "Ouzhpennañ un arveriad"
-
-#: ../../install2.pm_.c:49
-msgid "Configure networking"
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../install2.pm_.c:51 ../../install_steps_interactive.pm_.c:818
-msgid "Summary"
-msgstr ""
-
-#: ../../install2.pm_.c:52
-msgid "Configure services"
-msgstr "Kefluniañ servijoù"
-
-#: ../../install2.pm_.c:54
-msgid "Create a bootdisk"
-msgstr "Krouiñ ur bladennig loc'hañ"
-
-#: ../../install2.pm_.c:56
-msgid "Install bootloader"
-msgstr "Staliañ ar c'harger loc'hañ"
-
-#: ../../install2.pm_.c:57
-msgid "Configure X"
-msgstr "Kefluniañ X"
-
-#: ../../install2.pm_.c:58
-msgid "Exit install"
-msgstr "Dilezel ar staliadur"
-
-#: ../../install_any.pm_.c:402
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:433
-msgid "Can't use broadcast with no NIS domain"
-msgstr "N'hellañ ket implijout ar skignañ hep domani NIS"
-
-#: ../../install_any.pm_.c:676
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Lakait ur bladennig el lenner %s"
-
-#: ../../install_any.pm_.c:680
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:690
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:712
-msgid "Error reading file $f"
-msgstr "Fazi en ur lenn ar restr $f"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:310
-#: ../../interactive.pm_.c:99 ../../interactive.pm_.c:114
-#: ../../interactive.pm_.c:269 ../../interactive_newt.pm_.c:166
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:356
-#: ../../my_gtk.pm_.c:617 ../../my_gtk.pm_.c:640
-msgid "Ok"
-msgstr "Mat eo"
-
-#: ../../install_gtk.pm_.c:423
-#, fuzzy
-msgid "Please test the mouse"
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../install_gtk.pm_.c:424 ../../standalone/mousedrake_.c:132
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../install_gtk.pm_.c:425 ../../standalone/mousedrake_.c:133
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:41
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Ret eo deoc'h kaout ur parzhadur gwrizienn.\n"
-"Evit se, krouit ur parzhadur (pe glikit war unan a zo c'hoazh).\n"
-"Da c'houde dibabit an ober ``Poent marc'hañ'' ha lakait anezhañ da `/'"
-
-#: ../../install_interactive.pm_.c:46 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Ret eo deoc'h kaout ur parzhadur disloañ"
-
-#: ../../install_interactive.pm_.c:47 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"N'hoc'h eus ket a barzhadur disloañ\n"
-"\n"
-"Kenderc'hel evelato ?"
-
-#: ../../install_interactive.pm_.c:68
-#, fuzzy
-msgid "Use free space"
-msgstr "Implij da saveteiñ"
-
-#: ../../install_interactive.pm_.c:70
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:78
-#, fuzzy
-msgid "Use existing partition"
-msgstr "O furmadiñ parzhadurioù"
-
-#: ../../install_interactive.pm_.c:80
-#, fuzzy
-msgid "There is no existing partition to use"
-msgstr "O klask assevel an daolenn barzhañ"
-
-#: ../../install_interactive.pm_.c:87
-#, fuzzy
-msgid "Use the Windows partition for loopback"
-msgstr "Implij da saveteiñ"
-
-#: ../../install_interactive.pm_.c:90
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Pe barzhadur a vennit implijout evit lakaat Linux4Win ?"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Choose the sizes"
-msgstr "Dibabit ar mentoù"
-
-#: ../../install_interactive.pm_.c:93
-msgid "Root partition size in MB: "
-msgstr "Ment ar parzhadur gwrizienn e Mo :"
-
-#: ../../install_interactive.pm_.c:94
-msgid "Swap partition size in MB: "
-msgstr "Ment ar parzhadur disloañ e Mo :"
-
-#: ../../install_interactive.pm_.c:102
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:105
-#, fuzzy
-msgid "Which partition do you want to resize?"
-msgstr "Pe seurt parzhadur a vennit ?"
-
-#: ../../install_interactive.pm_.c:107
-#, fuzzy
-msgid "Computing Windows filesystem bounds"
-msgstr "O jediñ bevennoù ar reizhiad restroù FAT"
-
-#: ../../install_interactive.pm_.c:110
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:113
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:114
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"HO EVEZH !\n"
-"\n"
-"Ezhomm en deus DrakX adventañ ho parzhadur Windows bremañ. Bezit war "
-"evezh :\n"
-"arvarus eo an obererezh-se. Ma n'hoc'h eus ket graet c'hoazh, gwelloc'h e\n"
-"vije deoc'h seveniñ da gentañ scandisk (ha diouzh ret seveniñ defrag) war "
-"ar\n"
-"parzhadur-se, ha gwareziñ ho roadoù. Pa vezit sur, gwaskit \"Mat eo\""
-
-#: ../../install_interactive.pm_.c:123
-#, fuzzy
-msgid "Which size do you want to keep for windows on"
-msgstr "Da beseurt rann e mennit dilec'hiañ ?"
-
-#: ../../install_interactive.pm_.c:124
-#, fuzzy, c-format
-msgid "partition %s"
-msgstr "Parzhadur"
-
-#: ../../install_interactive.pm_.c:130
-#, fuzzy, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Adventañ ent emgefreek sac'het"
-
-#: ../../install_interactive.pm_.c:145
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:151
-msgid "Erase entire disk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:151
-msgid "Remove Windows(TM)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:154
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:157
-#, fuzzy, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Goude adventañ ar parzhadur %s e vo kollet holl roadoù ar parzhadur-se"
-
-#: ../../install_interactive.pm_.c:165
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "O furmadiñ parzhadurioù"
-
-#: ../../install_interactive.pm_.c:169
-msgid "Use fdisk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:172
-#, fuzzy, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Gallout a rit bremañ parzhañ ho pladenn galet %s\n"
-"Pa 'z eo graet, na zisoñjit ket enrollañ dre implijout `w'"
-
-#: ../../install_interactive.pm_.c:201
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "N'hoc'h eus parzhadur windows ebet !"
-
-#: ../../install_interactive.pm_.c:217
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "N'hellan ouzpennañ parzhadur ebet ken"
-
-#: ../../install_interactive.pm_.c:221
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy, c-format
-msgid "Partitioning failed: %s"
-msgstr "Seurt taolenn barzhañ : %s\n"
-
-#: ../../install_interactive.pm_.c:232
-msgid "Bringing up the network"
-msgstr "O lañsañ ar rouedad"
-
-#: ../../install_interactive.pm_.c:237
-msgid "Bringing down the network"
-msgstr "O tizenaouiñ ar rouedad"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Degouezhet ez eus ur fazi, hogen n'ouzon ket e verañ naet.\n"
-"Kendalc'hit war ho mar."
-
-#: ../../install_steps.pm_.c:203
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Poent marc'hañ doubl %s"
-
-#: ../../install_steps.pm_.c:385
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-
-#: ../../install_steps.pm_.c:451
-#, c-format
-msgid "Welcome to %s"
-msgstr "Degemer e %s"
-
-#: ../../install_steps.pm_.c:634
-msgid "No floppy drive available"
-msgstr "Lenner pladennig hegerz ebet"
-
-#: ../../install_steps_auto_install.pm_.c:51
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "O kregiñ gant al lankad `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Dibabit ar ment a vennit staliañ"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Ment hollek :"
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:437
-#, c-format
-msgid "Version: %s\n"
-msgstr "Stumm : %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:438
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Ment : %d Ko\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:337
-#: ../../install_steps_interactive.pm_.c:520
-msgid "Choose the packages you want to install"
-msgstr "Dibabit ar pakadoù a vennit staliañ"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../install_steps_gtk.pm_.c:340
-msgid "Info"
-msgstr "Titouroù"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:345
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install"
-msgstr "Staliañ"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:558
-#: ../../install_steps_interactive.pm_.c:675
-msgid "Installing"
-msgstr "O staliañ"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Gortozit mar plij,"
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:570
-msgid "Time remaining "
-msgstr "Amzer a chom"
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Amzer hollek"
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:675
-msgid "Preparing installation"
-msgstr "O prientiñ ar staliadur"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:618
-#, c-format
-msgid "Installing package %s"
-msgstr "O staliañ ar pakad %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:695
-#: ../../install_steps_gtk.pm_.c:699
-msgid "Go on anyway?"
-msgstr "Kenderc'hel evelato ?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:695
-msgid "There was an error ordering packages:"
-msgstr "Ur fazi a zo bet en ur rummañ pakadoù :"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Implijout ar c'hefluniadur o ren evit X11 ?"
-
-#: ../../install_steps_gtk.pm_.c:142
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Linux-Mandrake. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:156
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Dibabit unan eus ar renkadoù staliañ a-heul mar plij :"
-
-#: ../../install_steps_gtk.pm_.c:222
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ment hollek ar strolladoù hoc'h eus diuzet a zo war-dro %d Mo.\n"
-
-#: ../../install_steps_gtk.pm_.c:224
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ma vennit staliañ nebeutoc'h eget ar ment-se,\n"
-"diuzit an dregantad a bakadoù a vennit staliañ.\n"
-"\n"
-"Un dregantad izel a stalio hepken ar pakadoù pouezusañ;\n"
-"un dregantad a 100%% a stalio an holl bakadoù diuzet."
-
-#: ../../install_steps_gtk.pm_.c:229
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"N'eus egor war ho pladenn nemet evit %d%% eus ar pakadoù-se.\n"
-"\n"
-"Ma vennit staliañ nebeutoc'h eget se,\n"
-"diuzit an dregantad a bakadoù a vennit staliañ.\n"
-"Un dregantad izel a stalio hepken ar pakadoù pouezusañ;\n"
-"un dregantad a %d%% a stalio kement a bakadoù ma 'z eus tu."
-
-#: ../../install_steps_gtk.pm_.c:235
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Tu vo deoc'h o dibab spisoc'h el lankad a zeu."
-
-#: ../../install_steps_gtk.pm_.c:237
-msgid "Percentage of packages to install"
-msgstr "Dregantad a bakadoù da staliañ"
-
-#: ../../install_steps_gtk.pm_.c:285 ../../install_steps_interactive.pm_.c:599
-msgid "Package Group Selection"
-msgstr "Diuzadenn strollad pakadoù"
-
-#: ../../install_steps_gtk.pm_.c:305 ../../install_steps_interactive.pm_.c:614
-msgid "Individual package selection"
-msgstr "Diuz pakadoù unan hag unan"
-
-#: ../../install_steps_gtk.pm_.c:349
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "Expand Tree"
-msgstr "Astenn ar wezenn"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "Collapse Tree"
-msgstr "Plegañ ar wezenn"
-
-#: ../../install_steps_gtk.pm_.c:418
-msgid "Toggle between flat and group sorted"
-msgstr "Gwintañ etre kompez ha rummet dre strollad"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "Bad package"
-msgstr "Pakad siek"
-
-#: ../../install_steps_gtk.pm_.c:436
-#, c-format
-msgid "Name: %s\n"
-msgstr "Anv: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:439
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Talvoudegezh : %s\n"
-
-#: ../../install_steps_gtk.pm_.c:448 ../../install_steps_interactive.pm_.c:578
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ment hollek : %d / %d Mo"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "N'hellit ket andiuz ar pakad-mañ. Staliet eo endo"
-
-#: ../../install_steps_gtk.pm_.c:471
-#, fuzzy
-msgid "The following packages are going to be installed"
-msgstr "Ar pakadoù a-heul a zo war-nes bezañ distaliet"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "The following packages are going to be removed"
-msgstr "Ar pakadoù a-heul a zo war-nes bezañ staliet/lamet"
-
-#: ../../install_steps_gtk.pm_.c:482
-msgid "You can't select/unselect this package"
-msgstr "N'hellit ket diuz/andiuz ar pakad-mañ"
-
-#: ../../install_steps_gtk.pm_.c:501
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Hemañ a zo ur pakad ret, n'hell ket bezañ andiuzet"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "You can't unselect this package. It is already installed"
-msgstr "N'hellit ket andiuz ar pakad-mañ. Staliet eo endo"
-
-#: ../../install_steps_gtk.pm_.c:507
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Bremanaet e tle bezañ ar pabak-mañ\n"
-"Ha sur oc'h e mennit e ziuzañ ?"
-
-#: ../../install_steps_gtk.pm_.c:510
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "N'hellit ket andiuz ar pakad-mañ. Ret eo dezhañ bezañ bremanaet"
-
-#: ../../install_steps_gtk.pm_.c:563
-msgid "Estimating"
-msgstr "O vrasjediñ"
-
-#: ../../install_steps_gtk.pm_.c:582
-#, fuzzy
-msgid "Please wait, preparing installation"
-msgstr "O prientiñ ar staliadur"
-
-#: ../../install_steps_gtk.pm_.c:613
-#, c-format
-msgid "%d packages"
-msgstr "%d pakad"
-
-#: ../../install_steps_gtk.pm_.c:652
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:680 ../../install_steps_interactive.pm_.c:163
-#, fuzzy
-msgid "Accept"
-msgstr "Aotren an arveriad"
-
-#: ../../install_steps_gtk.pm_.c:680 ../../install_steps_interactive.pm_.c:163
-#, fuzzy
-msgid "Refuse"
-msgstr "Adventañ"
-
-#: ../../install_steps_gtk.pm_.c:681
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Kemmit ho Cd-Rom!\n"
-"\n"
-"Lakait el lenner ar Cd-Rom warnañ an diketenn \"%s\" mar plij ha gwaskit Mat "
-"eo da c'houde.\n"
-"Ma n'emañ ket ganeoc'h gwaskit Nullañ evit chom hep staliañ ar Cd-Rom-se."
-
-#: ../../install_steps_gtk.pm_.c:699
-msgid "There was an error installing packages:"
-msgstr "Ur fazi a zo bet en ur staliañ ar pakadoù :"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Ur fazi a zo bet"
-
-#: ../../install_steps_interactive.pm_.c:55
-msgid "Please, choose a language to use."
-msgstr "Diuzit ar yezh da implijout, mar plij."
-
-#: ../../install_steps_interactive.pm_.c:56
-msgid "You can choose other languages that will be available after install"
-msgstr "Gallout a rit dibab yezhoù all hag a vo hegerz goude staliañ"
-
-#: ../../install_steps_interactive.pm_.c:68
-#: ../../install_steps_interactive.pm_.c:613
-msgid "All"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:86
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:87
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Linux-"
-"Mandrake distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Linux-Mandrake distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Linux-Mandrake sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:182
-#: ../../install_steps_interactive.pm_.c:822
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Stokellaoueg"
-
-#: ../../install_steps_interactive.pm_.c:183
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Dibabit reizhadur ho stokellaoueg, mar plij."
-
-#: ../../install_steps_interactive.pm_.c:184
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:201
-msgid "Install Class"
-msgstr "Renkad staliañ"
-
-#: ../../install_steps_interactive.pm_.c:201
-msgid "Which installation class do you want?"
-msgstr "Pe renkad staliañ a fell deoc'h ?"
-
-#: ../../install_steps_interactive.pm_.c:203
-#, fuzzy
-msgid "Install/Update"
-msgstr "Staliañ/Bremanaat"
-
-#: ../../install_steps_interactive.pm_.c:203
-#, fuzzy
-msgid "Is this an install or an update?"
-msgstr "Hag ur staliadur pe ur bremanadur eo ?"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Recommended"
-msgstr "Erbedet"
-
-#: ../../install_steps_interactive.pm_.c:215
-#: ../../install_steps_interactive.pm_.c:218
-msgid "Expert"
-msgstr "Mailh"
-
-#: ../../install_steps_interactive.pm_.c:226
-#, fuzzy
-msgid "Update"
-msgstr "Bremanaat"
-
-#: ../../install_steps_interactive.pm_.c:238 ../../standalone/mousedrake_.c:41
-msgid "Please, choose the type of your mouse."
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../install_steps_interactive.pm_.c:244 ../../standalone/mousedrake_.c:57
-msgid "Mouse Port"
-msgstr "Porzh al logodenn"
-
-#: ../../install_steps_interactive.pm_.c:245 ../../standalone/mousedrake_.c:58
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Dibabit ar porzh a-steud m'eo luget ho logodenn outañ, mar plij."
-
-#: ../../install_steps_interactive.pm_.c:253
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:255
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:256
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:275
-msgid "Configuring PCMCIA cards..."
-msgstr "O kefluniañ kartennoù PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:275
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:280
-msgid "Configuring IDE"
-msgstr "Kefluniañ IDE"
-
-#: ../../install_steps_interactive.pm_.c:280
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:295
-msgid "no available partitions"
-msgstr "parzhadur hegerz ebet"
-
-#: ../../install_steps_interactive.pm_.c:298
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:306
-msgid "Choose the mount points"
-msgstr "Dibabit at poentoù marc'hañ"
-
-#: ../../install_steps_interactive.pm_.c:323
-#, fuzzy, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"N'hellañ ket lenn ho taolenn barzhañ, re vrein eo evidon :(\n"
-"Klask a rin kenderc'hel en ur ziverkañ ar parzhadurioù siek"
-
-#: ../../install_steps_interactive.pm_.c:336
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Ne c'hellas ket DiskDrake lenn ent reizh an daolenn barzhañ.\n"
-"Kendalc'hit war ho mar !"
-
-#: ../../install_steps_interactive.pm_.c:361
-msgid "Root Partition"
-msgstr "Parzhadur gwrizienn"
-
-#: ../../install_steps_interactive.pm_.c:362
-msgid "What is the root partition (/) of your system?"
-msgstr "Pehini eo parzhadur gwrizienn (/) ho reizhiad ?"
-
-#: ../../install_steps_interactive.pm_.c:376
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Ret eo deoc'h adloc'hañ evit ma talvezo kemmoù an daolenn barzhañ"
-
-#: ../../install_steps_interactive.pm_.c:403
-msgid "Choose the partitions you want to format"
-msgstr "Dibabit ar parzhadur a vennit furmadiñ"
-
-#: ../../install_steps_interactive.pm_.c:404
-msgid "Check bad blocks?"
-msgstr "Gwiriañ ar bloc'hoù siek ?"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Formatting partitions"
-msgstr "O furmadiñ parzhadurioù"
-
-#: ../../install_steps_interactive.pm_.c:429
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "O krouiñ hag o furmadiñ ar restr saveteiñ %s"
-
-#: ../../install_steps_interactive.pm_.c:432
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Ket a-walc'h a zisloañ evit peurstaliañ, kreskit anezhañ mar plij"
-
-#: ../../install_steps_interactive.pm_.c:438
-msgid "Looking for available packages"
-msgstr "O klask ar pakadoù hegerz"
-
-#: ../../install_steps_interactive.pm_.c:444
-msgid "Finding packages to upgrade"
-msgstr "O kavout pakadoù da vremanaat"
-
-#: ../../install_steps_interactive.pm_.c:461
-#, fuzzy, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "Ho reizhiad n'eus ket wa-walc'h a egor evit staliañ pe vremanaat"
-
-#: ../../install_steps_interactive.pm_.c:480
-#, fuzzy, c-format
-msgid "Complete (%dMB)"
-msgstr "Boas"
-
-#: ../../install_steps_interactive.pm_.c:480
-#, fuzzy, c-format
-msgid "Minimum (%dMB)"
-msgstr "(%d Mo)"
-
-#: ../../install_steps_interactive.pm_.c:480
-#, fuzzy, c-format
-msgid "Recommended (%dMB)"
-msgstr "Erbedet"
-
-#: ../../install_steps_interactive.pm_.c:486
-#, fuzzy
-msgid "Custom"
-msgstr "Neuziet"
-
-#: ../../install_steps_interactive.pm_.c:585
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:650
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"M'hoc'h eus an holl CDoù er roll a-is, gwaskit Mat eo.\n"
-"Ma n'hoc'h eus hini eus ar CDoù-se, gwaskit Nullañ.\n"
-"Ma fazi deoc'h lod eus ar CDoù, andiuzit anezho ha gwaskit Mat eo."
-
-#: ../../install_steps_interactive.pm_.c:655
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom skridennet \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:684
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"O staliañ ar pakad %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:693
-msgid "Post-install configuration"
-msgstr "Kefluniadur goude staliañ"
-
-#: ../../install_steps_interactive.pm_.c:718
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Tu zo deoc'h bremañ ezkargañ meziantoù gouestlet d'ar rinegouriezh.\n"
-"\n"
-"HO EVEZH :\n"
-"\n"
-"Abalamour m'eo disheñvel ar pennaennoù meur o talvezout evit ar meziantoù-"
-"mañ hervez\n"
-"gwiraouriezhoù disheñvel, ret eo d'an arval ha/pe arveriad en diwezh ar "
-"meziantoù-mañ\n"
-"gwiriañ eo aotreet da ezskargañ, mirout ha/pe implijout ar meziantoù-mañ\n"
-"gouez d'al lezennoù en e/he gwiraouriezh.\n"
-"\n"
-"Ouzhpenn an arval ha/pe arveriad en diwezh a rank bezañ war evezh chom hep "
-"terriñ\n"
-"lezennoù e/he gwiraouriezh. Ma c'hoarvezfe gant an arval ha/pe arveriad\n"
-"en diwezh na zoujañ ouzh termenoù lezennoù o talvezout, e telezfe kastizoù\n"
-"kriz.\n"
-"\n"
-"E nep degouezh ne vo dalc'het Mandrakesoft nag e oberatourien na/pe e "
-"bourvezerien\n"
-"atebek eus nep gaou dibar, ameeun pe zarvoudus a c'hoarvezfe (ha pa vefe\n"
-"zoken e-touez traoù all koll gounid, arsav aferioù, koll roadoù kenwerzhel "
-"ha\n"
-"kolloù arc'hant all, hag atebegezh pe zigoll diouzh an dro da vezañ paeet\n"
-"da heul ur barnadeg) o tont diouzh implij, perc'hennañ, pe zoken ezkargañ\n"
-"ar meziantoù-mañ, a c'hellfe an arval ha/pe arveriad en diwezh bezañ\n"
-"grataet goude bezañ sinet an emglev-mañ.\n"
-"\n"
-"\n"
-"Evit forzh pe c'houlenn a-zivout an emglevioù-se, darempredit mar plij\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"SUA"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid "Choose a mirror from which to get the packages"
-msgstr "Dibabit ur melezour da dapout ar pakadoù diwarnañ"
-
-#: ../../install_steps_interactive.pm_.c:761
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "O taremprediñ ar melezour evit kaout roll ar pakadoù hegerz"
-
-#: ../../install_steps_interactive.pm_.c:764
-msgid "Please choose the packages you want to install."
-msgstr "Dibabit ar pakadoù a vennit staliañ, mar plij."
-
-#: ../../install_steps_interactive.pm_.c:776
-#, fuzzy
-msgid "Which is your timezone?"
-msgstr "Pe seurt a vo implij ho reizhiad ?"
-
-#: ../../install_steps_interactive.pm_.c:778
-msgid "Is your hardware clock set to GMT?"
-msgstr "Ha war GMT eo lakaet ho eurier periantel ?"
-
-#: ../../install_steps_interactive.pm_.c:806 ../../printer.pm_.c:22
-#: ../../printerdrake.pm_.c:415
-#, fuzzy
-msgid "Remote CUPS server"
-msgstr "Steud a-bell"
-
-#: ../../install_steps_interactive.pm_.c:807
-#, fuzzy
-msgid "No printer"
-msgstr "Moullerez lec'hel"
-
-#: ../../install_steps_interactive.pm_.c:821
-#, fuzzy
-msgid "Mouse"
-msgstr "Logodenn USB"
-
-#: ../../install_steps_interactive.pm_.c:823
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:824 ../../printerdrake.pm_.c:344
-msgid "Printer"
-msgstr "Moullerez"
-
-#: ../../install_steps_interactive.pm_.c:826
-msgid "ISDN card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:829
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:832
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:862
-#, fuzzy
-msgid "Which printing system do you want to use?"
-msgstr "Pe seurt parzhadur a vennit ?"
-
-#: ../../install_steps_interactive.pm_.c:896
-msgid "No password"
-msgstr "Tremenger ebet"
-
-#: ../../install_steps_interactive.pm_.c:901
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Re eeun eo an tremenger-se (%d arouezenn a zo ret d'an nebeutañ)"
-
-#: ../../install_steps_interactive.pm_.c:907
-msgid "Use NIS"
-msgstr "Implijout NIS"
-
-#: ../../install_steps_interactive.pm_.c:907
-msgid "yellow pages"
-msgstr "pajennoù melen"
-
-#: ../../install_steps_interactive.pm_.c:914
-msgid "Authentification NIS"
-msgstr "Dilesadur NIS"
-
-#: ../../install_steps_interactive.pm_.c:915
-msgid "NIS Domain"
-msgstr "Domani NIS"
-
-#: ../../install_steps_interactive.pm_.c:916
-msgid "NIS Server"
-msgstr "Servijer NIS"
-
-#: ../../install_steps_interactive.pm_.c:951
-#, fuzzy
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Ur bladenn loc'hañ neuziet a ro un tu da loc'hañ ho reizhiad Linux hep "
-"bezañ\n"
-"dindan beli ar c'harger loc'hañ boas. Talvoudus eo ma ne mennit ket staliañ "
-"LILO\n"
-"(pe grub) war ho reizhiad, pe ma skarzh ur reizhiad oberiañ LILO, pe ma ne\n"
-"da ket en-dro LILO war ho kefluniadur periantel. Ur bladenn loc'hañ neuziet\n"
-"a c'hell ivez bezañ implijet gant ar skeudenn saveteiñ Mandrake, en ur "
-"aesaat an\n"
-"assevel pa vefec'h sac'het grevus. Mennout a rit krouiñ ur bladenn loc'hañ "
-"evit\n"
-"ho reizhiad ?"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "First floppy drive"
-msgstr "Lenner pladennig kentañ"
-
-#: ../../install_steps_interactive.pm_.c:968
-msgid "Second floppy drive"
-msgstr "Eil lenner pladennig"
-
-#: ../../install_steps_interactive.pm_.c:969
-msgid "Skip"
-msgstr "Tremen e-biou"
-
-#: ../../install_steps_interactive.pm_.c:974
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Ur bladenn loc'hañ neuziet a ro un tu da loc'hañ ho reizhiad Linux hep "
-"bezañ\n"
-"dindan beli ar c'harger loc'hañ boas. Talvoudus eo ma ne mennit ket staliañ "
-"LILO\n"
-"(pe grub) war ho reizhiad, pe ma skarzh ur reizhiad oberiañ LILO, pe ma ne\n"
-"da ket en-dro LILO war ho kefluniadur periantel. Ur bladenn loc'hañ neuziet\n"
-"a c'hell ivez bezañ implijet gant ar skeudenn saveteiñ Mandrake, en ur "
-"aesaat an\n"
-"assevel pa vefec'h sac'het grevus. Mennout a rit krouiñ ur bladenn loc'hañ "
-"evit\n"
-"ho reizhiad ?"
-
-#: ../../install_steps_interactive.pm_.c:983
-msgid "Sorry, no floppy drive available"
-msgstr "Ho tigarez, lenner pladennig hegerz ebet"
-
-#: ../../install_steps_interactive.pm_.c:987
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Dibabit al lenner pladennig a vennit implijout evit ober ar bladenn loc'hañ"
-
-#: ../../install_steps_interactive.pm_.c:991
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Lakait ur bladennig el lenner %s"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid "Creating bootdisk"
-msgstr "O krouiñ ar bladenn loc'hañ"
-
-#: ../../install_steps_interactive.pm_.c:1001
-msgid "Preparing bootloader"
-msgstr "O prientiñ ar c'harger loc'hañ"
-
-#: ../../install_steps_interactive.pm_.c:1010
-#, fuzzy
-msgid "Do you want to use aboot?"
-msgstr "Mennout a rit implijout SILO ?"
-
-#: ../../install_steps_interactive.pm_.c:1013
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fazi en ur staliañ aboot,\n"
-"klask rediañ ar staliadur zoken ma tistruj ar parzhadur kentañ ?"
-
-#: ../../install_steps_interactive.pm_.c:1022
-#, fuzzy
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Staliadur LILO a zo sac'het. Degouezhet eo ar fazi a heul :"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1038 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Izel"
-
-#: ../../install_steps_interactive.pm_.c:1039 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Etre"
-
-#: ../../install_steps_interactive.pm_.c:1040 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Uhel"
-
-#: ../../install_steps_interactive.pm_.c:1044 ../../standalone/draksec_.c:49
-msgid "Choose security level"
-msgstr "Dibabit al live surentez"
-
-#: ../../install_steps_interactive.pm_.c:1080
-msgid "Do you want to generate an auto install floppy for linux replication?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1082
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Lakait ur bladennig gwerc'h el lenner %s"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "Creating auto install floppy"
-msgstr "O krouiñ ur bladennig staliañ emgefreek"
-
-#: ../../install_steps_interactive.pm_.c:1156
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Lankadoù 'zo n'int ket peurc'hraet.\n"
-"\n"
-"Mennout a rit kuitaat da vat bremañ ?"
-
-#: ../../install_steps_interactive.pm_.c:1167
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Linux-"
-"Mandrake,\n"
-"consult the Errata available from http://www.linux-mandrake.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Linux-Mandrake User's Guide."
-msgstr ""
-"Gourc'hemennoù, peurc'hraet eo ar staliadur.\n"
-"Lamit ar bladenn loc'hañ ha gwaskit enkas evit adloc'hañ.\n"
-"\n"
-"Evit titouroù war palastroù hegerz evit stumm-mañ Linux-Mandrake,\n"
-"sellit ouzh ar meneger fazioù hegerz e http://www.linux-mandrake.com/.\n"
-"\n"
-"Titouroù war gefluniañ ho reizhiad a zo hegerz e rannbennad Goude\n"
-"Staliañ Sturier ofisiel an Arveriad Linux-Mandrake."
-
-#: ../../install_steps_interactive.pm_.c:1179
-#, fuzzy
-msgid "Generate auto install floppy"
-msgstr "O krouiñ ur bladennig staliañ emgefreek"
-
-#: ../../install_steps_interactive.pm_.c:1181
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1186
-msgid "Automated"
-msgstr "Emgefreek"
-
-#: ../../install_steps_interactive.pm_.c:1186
-#, fuzzy
-msgid "Replay"
-msgstr "Adkargañ"
-
-#: ../../install_steps_interactive.pm_.c:1189
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Diuz pakadoù unan hag unan"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Linux-Mandrake Installation %s"
-msgstr "Staliadur Linux-Mandrake %s"
-
-#: ../../install_steps_newt.pm_.c:33
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> etre elfennoù | <Esaouenn> a ziuz | <F12> skramm a heul "
-
-#: ../../interactive.pm_.c:65
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:267
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:290
-msgid "Please wait"
-msgstr "Gortozit mar plij"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Amsklaer (%s), bezit spisoc'h\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Dibab fall, klaskit adarre\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr "? (%s dre ziouer)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ho tibab ? (%s dre ziouer)"
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Ho tibab ? (%s dre ziouer, skrivit `none' evit hini ebet)"
-
-#: ../../keyboard.pm_.c:124 ../../keyboard.pm_.c:155
-msgid "Czech (QWERTZ)"
-msgstr "Tchek (QWERTZ)"
-
-#: ../../keyboard.pm_.c:125 ../../keyboard.pm_.c:138 ../../keyboard.pm_.c:158
-msgid "German"
-msgstr "Alaman"
-
-#: ../../keyboard.pm_.c:126
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:127 ../../keyboard.pm_.c:164
-msgid "Spanish"
-msgstr "Spagnol"
-
-#: ../../keyboard.pm_.c:128 ../../keyboard.pm_.c:165
-msgid "Finnish"
-msgstr "Finnek"
-
-#: ../../keyboard.pm_.c:129 ../../keyboard.pm_.c:139 ../../keyboard.pm_.c:166
-msgid "French"
-msgstr "Gall"
-
-#: ../../keyboard.pm_.c:130 ../../keyboard.pm_.c:187
-msgid "Norwegian"
-msgstr "Norvegek"
-
-#: ../../keyboard.pm_.c:131
-msgid "Polish"
-msgstr "Polonek"
-
-#: ../../keyboard.pm_.c:132 ../../keyboard.pm_.c:192
-msgid "Russian"
-msgstr "Rusiek"
-
-#: ../../keyboard.pm_.c:133 ../../keyboard.pm_.c:203
-msgid "UK keyboard"
-msgstr "Stokellaoueg RU"
-
-#: ../../keyboard.pm_.c:134 ../../keyboard.pm_.c:137 ../../keyboard.pm_.c:204
-msgid "US keyboard"
-msgstr "Stokellaoueg SUA"
-
-#: ../../keyboard.pm_.c:141
-msgid "Armenian (old)"
-msgstr "Armeniek (kozh)"
-
-#: ../../keyboard.pm_.c:142
-msgid "Armenian (typewriter)"
-msgstr "Armeniek (skriverez)"
-
-#: ../../keyboard.pm_.c:143
-msgid "Armenian (phonetic)"
-msgstr "Armeniek (soniadel)"
-
-#: ../../keyboard.pm_.c:147
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:148
-msgid "Azerbaidjani (cyrillic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:149
-msgid "Belgian"
-msgstr "Belgian"
-
-#: ../../keyboard.pm_.c:150
-msgid "Bulgarian"
-msgstr "Bulgarek"
-
-#: ../../keyboard.pm_.c:151
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilek"
-
-#: ../../keyboard.pm_.c:152
-#, fuzzy
-msgid "Belarusian"
-msgstr "Bulgarek"
-
-#: ../../keyboard.pm_.c:153
-msgid "Swiss (German layout)"
-msgstr "Suis (reizhadur alaman)"
-
-#: ../../keyboard.pm_.c:154
-msgid "Swiss (French layout)"
-msgstr "Suis (reizhadur gall)"
-
-#: ../../keyboard.pm_.c:156
-msgid "Czech (QWERTY)"
-msgstr "Tchek (QWERTY)"
-
-#: ../../keyboard.pm_.c:157
-msgid "Czech (Programmers)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:159
-msgid "German (no dead keys)"
-msgstr "Alaman (stokell marv ebet)"
-
-#: ../../keyboard.pm_.c:160
-msgid "Danish"
-msgstr "Danek"
-
-#: ../../keyboard.pm_.c:161
-#, fuzzy
-msgid "Dvorak (US)"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:162
-#, fuzzy
-msgid "Dvorak (Norwegian)"
-msgstr "Norvegek"
-
-#: ../../keyboard.pm_.c:163
-msgid "Estonian"
-msgstr "Estoniek"
-
-#: ../../keyboard.pm_.c:167
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Jorjiek (reizhadur \"Rusiek\")"
-
-#: ../../keyboard.pm_.c:168
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Jorjiek (reizhadur \"Latin\")"
-
-#: ../../keyboard.pm_.c:169
-msgid "Greek"
-msgstr "Gresian"
-
-#: ../../keyboard.pm_.c:170
-msgid "Hungarian"
-msgstr "Hungarian"
-
-#: ../../keyboard.pm_.c:171
-msgid "Croatian"
-msgstr "Kroatek"
-
-#: ../../keyboard.pm_.c:172
-msgid "Israeli"
-msgstr "Israelian"
-
-#: ../../keyboard.pm_.c:173
-msgid "Israeli (Phonetic)"
-msgstr "Israelian (soniadel)"
-
-#: ../../keyboard.pm_.c:174
-#, fuzzy
-msgid "Iranian"
-msgstr "Ukrainiek"
-
-#: ../../keyboard.pm_.c:175
-msgid "Icelandic"
-msgstr "Islandek"
-
-#: ../../keyboard.pm_.c:176
-msgid "Italian"
-msgstr "Italian"
-
-#: ../../keyboard.pm_.c:177
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:178
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Stokellaoueg RU"
-
-#: ../../keyboard.pm_.c:179
-msgid "Latin American"
-msgstr "Amerikan Latin"
-
-#: ../../keyboard.pm_.c:180
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:181
-msgid "Dutch"
-msgstr "Hollandek"
-
-#: ../../keyboard.pm_.c:182
-#, fuzzy
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituaniek AZERTY"
-
-#: ../../keyboard.pm_.c:184
-#, fuzzy
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituaniek AZERTY"
-
-#: ../../keyboard.pm_.c:185
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituaniek QUERTY \"linenn sifroù\""
-
-#: ../../keyboard.pm_.c:186
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituaniek QUERTY \"soniadel\""
-
-#: ../../keyboard.pm_.c:188
-msgid "Polish (qwerty layout)"
-msgstr "Polonek (reizhadur qwerty)"
-
-#: ../../keyboard.pm_.c:189
-msgid "Polish (qwertz layout)"
-msgstr "Polonek (reizhadur qwerty)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Portuguese"
-msgstr "Portugalek"
-
-#: ../../keyboard.pm_.c:191
-msgid "Canadian (Quebec)"
-msgstr "Kanadian (Kebek)"
-
-#: ../../keyboard.pm_.c:193
-msgid "Russian (Yawerty)"
-msgstr "Rusiek (Yawerty)"
-
-#: ../../keyboard.pm_.c:194
-msgid "Swedish"
-msgstr "Svedek"
-
-#: ../../keyboard.pm_.c:195
-msgid "Slovenian"
-msgstr "Slovek"
-
-#: ../../keyboard.pm_.c:196
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakek (QWERTZ)"
-
-#: ../../keyboard.pm_.c:197
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakek (QWERTY)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Slovakian (Programmers)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:199
-msgid "Thai keyboard"
-msgstr "Stokellaoueg Thai"
-
-#: ../../keyboard.pm_.c:200
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turkek (hengounel doare \"F\")"
-
-#: ../../keyboard.pm_.c:201
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turkek (arnevez doare \"Q\")"
-
-#: ../../keyboard.pm_.c:202
-msgid "Ukrainian"
-msgstr "Ukrainiek"
-
-#: ../../keyboard.pm_.c:205
-msgid "US keyboard (international)"
-msgstr "Stokellaoueg SUA (etrevroadel)"
-
-#: ../../keyboard.pm_.c:206
-#, fuzzy
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Lituaniek QUERTY \"linenn sifroù\""
-
-#: ../../keyboard.pm_.c:207
-#, fuzzy
-msgid "Yugoslavian (latin/cyrillic)"
-msgstr "Yougoslaviek (reizhadur latin)"
-
-#: ../../lvm.pm_.c:70
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Logodenn Sun"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-#, fuzzy
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Logodenn rummel"
-
-#: ../../mouse.pm_.c:34
-#, fuzzy
-msgid "GlidePoint"
-msgstr "ALPS GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Logodenn Kensington Thinking"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Rummel"
-
-#: ../../mouse.pm_.c:45
-#, fuzzy
-msgid "Wheel"
-msgstr "live"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "a-steud"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Logodenn rummel 2 nozelenn"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Logodenn rummel 3 nozelenn"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech doare CC (a-steud)"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-#, fuzzy
-msgid "MM Series"
-msgstr "Doare MM"
-
-#: ../../mouse.pm_.c:60
-#, fuzzy
-msgid "MM HitTablet"
-msgstr "MM HitTablet (a-steud)"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logodenn Logitech (a-steud, seurt C7 kozh)"
-
-#: ../../mouse.pm_.c:65
-#, fuzzy
-msgid "busmouse"
-msgstr "Logodenn ebet"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:72
-#, fuzzy
-msgid "none"
-msgstr "Graet"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Logodenn ebet"
-
-#: ../../my_gtk.pm_.c:356
-#, fuzzy
-msgid "Finish"
-msgstr "Finnek"
-
-#: ../../my_gtk.pm_.c:356
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:357
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:617
-msgid "Is this correct?"
-msgstr "Ha reizh eo ?"
-
-#: ../../netconnect.pm_.c:143
-#, fuzzy
-msgid "Internet configuration"
-msgstr "Kefluniañ ar proksioù"
-
-#: ../../netconnect.pm_.c:144
-#, fuzzy
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: ../../netconnect.pm_.c:148
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../netconnect.pm_.c:154 ../../standalone/draknet_.c:196
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "Da beseurt pladenn e mennit dilec'hiañ ?"
-
-#: ../../netconnect.pm_.c:155
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../netconnect.pm_.c:156 ../../standalone/draknet_.c:196
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr "Anv ar gevreadenn"
-
-#: ../../netconnect.pm_.c:161 ../../netconnect.pm_.c:904
-#: ../../netconnect.pm_.c:934 ../../netconnect.pm_.c:1012
-msgid "Network Configuration"
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../netconnect.pm_.c:222 ../../netconnect.pm_.c:266
-#: ../../netconnect.pm_.c:276 ../../netconnect.pm_.c:283
-#: ../../netconnect.pm_.c:293
-#, fuzzy
-msgid "ISDN Configuration"
-msgstr "Kefluniadur"
-
-#: ../../netconnect.pm_.c:222
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../netconnect.pm_.c:236
-#, fuzzy
-msgid "Connection Configuration"
-msgstr "Kefluniañ ar proksioù"
-
-#: ../../netconnect.pm_.c:237
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../netconnect.pm_.c:239 ../../standalone/draknet_.c:552
-msgid "Card IRQ"
-msgstr ""
-
-#: ../../netconnect.pm_.c:240 ../../standalone/draknet_.c:553
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:241 ../../standalone/draknet_.c:554
-msgid "Card IO"
-msgstr ""
-
-#: ../../netconnect.pm_.c:242 ../../standalone/draknet_.c:555
-msgid "Card IO_0"
-msgstr ""
-
-#: ../../netconnect.pm_.c:243 ../../standalone/draknet_.c:556
-msgid "Card IO_1"
-msgstr ""
-
-#: ../../netconnect.pm_.c:244 ../../standalone/draknet_.c:557
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../netconnect.pm_.c:245 ../../standalone/draknet_.c:558
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:246 ../../standalone/draknet_.c:559
-#, fuzzy
-msgid "Provider phone number"
-msgstr "Niverenn bellgomz"
-
-#: ../../netconnect.pm_.c:247
-msgid "Provider dns 1"
-msgstr ""
-
-#: ../../netconnect.pm_.c:248
-msgid "Provider dns 2"
-msgstr ""
-
-#: ../../netconnect.pm_.c:249 ../../standalone/draknet_.c:564
-#, fuzzy
-msgid "Dialing mode"
-msgstr "Anv domani"
-
-#: ../../netconnect.pm_.c:250 ../../standalone/draknet_.c:562
-#, fuzzy
-msgid "Account Login (user name)"
-msgstr "Poent marc'hañ"
-
-#: ../../netconnect.pm_.c:251 ../../standalone/draknet_.c:563
-#, fuzzy
-msgid "Account Password"
-msgstr "Tremenger"
-
-#: ../../netconnect.pm_.c:261
-msgid "Europe"
-msgstr ""
-
-#: ../../netconnect.pm_.c:261
-msgid "Europe (EDSS1)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:263
-#, fuzzy
-msgid "Rest of the world"
-msgstr "Amprouiñ ar c'hefluniadur"
-
-#: ../../netconnect.pm_.c:263
-msgid ""
-"Rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:267
-#, fuzzy
-msgid "Which protocol do you want to use ?"
-msgstr "Pe seurt parzhadur a vennit ?"
-
-#: ../../netconnect.pm_.c:277
-#, fuzzy
-msgid "What kind of card do you have?"
-msgstr "Peseurt moullerez hoc'h eus ?"
-
-#: ../../netconnect.pm_.c:278
-msgid "I don't know"
-msgstr ""
-
-#: ../../netconnect.pm_.c:278
-#, fuzzy
-msgid "ISA / PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../netconnect.pm_.c:278
-#, fuzzy
-msgid "PCI"
-msgstr "PCMCIA"
-
-#: ../../netconnect.pm_.c:284
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:288
-msgid "Abort"
-msgstr ""
-
-#: ../../netconnect.pm_.c:288
-#, fuzzy
-msgid "Continue"
-msgstr "Kenderc'hel evelato ?"
-
-#: ../../netconnect.pm_.c:294
-#, fuzzy
-msgid "Which is your ISDN card ?"
-msgstr "Pehini eo ho takad-eur ?"
-
-#: ../../netconnect.pm_.c:314
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../netconnect.pm_.c:323
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../netconnect.pm_.c:371
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../netconnect.pm_.c:375 ../../standalone/drakgw_.c:232
-#, fuzzy
-msgid "Choose the network interface"
-msgstr "Dibabit ar ment nevez"
-
-#: ../../netconnect.pm_.c:376
-#, fuzzy
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Dibabit ar porzh a-steud m'eo luget ho logodenn outañ, mar plij."
-
-#: ../../netconnect.pm_.c:385 ../../netconnect.pm_.c:700
-#: ../../netconnect.pm_.c:845 ../../standalone/drakgw_.c:223
-msgid "Network interface"
-msgstr ""
-
-#: ../../netconnect.pm_.c:386
-msgid ""
-"\n"
-"Do you agree?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:386
-#, fuzzy
-msgid "I'm about to restart the network device:\n"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: ../../netconnect.pm_.c:484
-#, fuzzy
-msgid "ADSL configuration"
-msgstr "Kefluniadur"
-
-#: ../../netconnect.pm_.c:485
-#, fuzzy
-msgid "Do you want to start your connection at boot?"
-msgstr "Mennout a rit implijout aboot ?"
-
-#: ../../netconnect.pm_.c:620
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Dibabit ouzh pe borzh a-steud eo luget ho modem, mar plij."
-
-#: ../../netconnect.pm_.c:625
-msgid "Dialup options"
-msgstr "Dibarzhoù sifrennañ"
-
-#: ../../netconnect.pm_.c:626 ../../standalone/draknet_.c:566
-msgid "Connection name"
-msgstr "Anv ar gevreadenn"
-
-#: ../../netconnect.pm_.c:627 ../../standalone/draknet_.c:567
-#, fuzzy
-msgid "Phone number"
-msgstr "Niverenn bellgomz"
-
-#: ../../netconnect.pm_.c:628 ../../standalone/draknet_.c:568
-msgid "Login ID"
-msgstr "Anv ereañ"
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Authentication"
-msgstr "Dilesadur"
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Script-based"
-msgstr "Diazezet war ur skrid"
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Terminal-based"
-msgstr "Diazezet war un dermenell"
-
-#: ../../netconnect.pm_.c:631 ../../standalone/draknet_.c:571
-#, fuzzy
-msgid "Domain name"
-msgstr "Anv ar gevreadenn"
-
-#: ../../netconnect.pm_.c:632 ../../standalone/draknet_.c:572
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Servijer DNS kentañ"
-
-#: ../../netconnect.pm_.c:633 ../../standalone/draknet_.c:573
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Eil servijer DNS"
-
-#: ../../netconnect.pm_.c:701
-msgid ""
-"I'm about to restart the network device $netc->{NET_DEVICE}. Do you agree?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:745
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../netconnect.pm_.c:745 ../../netconnect.pm_.c:748
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../netconnect.pm_.c:745
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Da beseurt pladenn e mennit dilec'hiañ ?"
-
-#: ../../netconnect.pm_.c:748
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr "Anv ar gevreadenn"
-
-#: ../../netconnect.pm_.c:748
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "Da beseurt pladenn e mennit dilec'hiañ ?"
-
-#: ../../netconnect.pm_.c:752 ../../standalone/net_monitor_.c:81
-#, fuzzy
-msgid "Connect to Internet"
-msgstr "Anv ar gevreadenn"
-
-#: ../../netconnect.pm_.c:754
-#, fuzzy
-msgid "Disconnect from Internet"
-msgstr "Anv ar gevreadenn"
-
-#: ../../netconnect.pm_.c:756
-#, fuzzy
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../netconnect.pm_.c:759
-#, fuzzy
-msgid "Internet connection & configuration"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../netconnect.pm_.c:811 ../../netconnect.pm_.c:961
-#: ../../netconnect.pm_.c:971 ../../netconnect.pm_.c:986
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../netconnect.pm_.c:812
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "Mailh"
-
-#: ../../netconnect.pm_.c:812
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../netconnect.pm_.c:812
-#, fuzzy
-msgid "What kind is your ISDN connection?"
-msgstr "Ouzh pe borzh a-steud eo luget ho logodenn ?"
-
-#: ../../netconnect.pm_.c:833 ../../netconnect.pm_.c:882
-#, fuzzy
-msgid "Connect to the Internet"
-msgstr "Anv ar gevreadenn"
-
-#: ../../netconnect.pm_.c:834
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../netconnect.pm_.c:836
-msgid "use dhcp"
-msgstr ""
-
-#: ../../netconnect.pm_.c:836
-msgid "use pppoe"
-msgstr ""
-
-#: ../../netconnect.pm_.c:836
-msgid "use pptp"
-msgstr ""
-
-#: ../../netconnect.pm_.c:846
-#, fuzzy, c-format
-msgid "I'm about to restart the network device %s. Do you agree?"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: ../../netconnect.pm_.c:883
-#, fuzzy
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "Pe seurt parzhadur a vennit ?"
-
-#: ../../netconnect.pm_.c:900
-#, fuzzy
-msgid "Network configuration"
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../netconnect.pm_.c:901
-#, fuzzy
-msgid "Do you want to restart the network"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: ../../netconnect.pm_.c:904
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: ../../netconnect.pm_.c:935
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:962
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:964
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Dibabit ar ment nevez"
-
-#: ../../netconnect.pm_.c:965
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../netconnect.pm_.c:971 ../../printerdrake.pm_.c:19
-msgid "Detecting devices..."
-msgstr "O tinoiñ trobarzhelloù..."
-
-#: ../../netconnect.pm_.c:978
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../netconnect.pm_.c:978
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Poent marc'hañ doubl %s"
-
-#: ../../netconnect.pm_.c:979
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../netconnect.pm_.c:979
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../netconnect.pm_.c:980
-#, fuzzy
-msgid "DSL (or ADSL) connection"
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../netconnect.pm_.c:980
-#, c-format
-msgid "detected on interface %s"
-msgstr ""
-
-#: ../../netconnect.pm_.c:981
-#, fuzzy
-msgid "Cable connection"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../netconnect.pm_.c:982
-#, fuzzy
-msgid "LAN connection"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../netconnect.pm_.c:982
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../netconnect.pm_.c:987
-#, fuzzy
-msgid "How do you want to connect to the Internet?"
-msgstr "Da beseurt pladenn e mennit dilec'hiañ ?"
-
-#: ../../netconnect.pm_.c:1004
-msgid ""
-"Congratulation, The network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system."
-msgstr ""
-
-#: ../../netconnect.pm_.c:1007
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-
-#: ../../network.pm_.c:253
-msgid "no network card found"
-msgstr "kartenn rouedad kavet ebet"
-
-#: ../../network.pm_.c:277 ../../network.pm_.c:387
-msgid "Configuring network"
-msgstr "Kefluniañ ar rouedad"
-
-#: ../../network.pm_.c:278
-#, fuzzy
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Roit ho anv ostiz mar plij.\n"
-"Un anv peurzoareet a zlefe bezañ hini o ostiz,\n"
-"evel ``mabenveg.mastal.makomp.com''.\n"
-"Gallout a rit ivez reiñ chomlec'h IP an dreuzell m'hoc'h eus unan"
-
-#: ../../network.pm_.c:282 ../../network.pm_.c:392
-#, fuzzy
-msgid "Host name"
-msgstr "Anv an ostiz :"
-
-#: ../../network.pm_.c:319
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network.pm_.c:324
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Skrivit ar c'hefluniadur IP evit ar benveg-mañ mar plij.\n"
-"Pep mellad a zlefe bezañ skrivet evel ur chomlec'h IP e stumm\n"
-"sifroù dekvel pikoù etrezo (da skouer 1.2.3.4)."
-
-#: ../../network.pm_.c:333 ../../network.pm_.c:334
-#, c-format
-msgid "Configuring network device %s"
-msgstr "O kefluniañ an drobarzhell rouedad %s"
-
-#: ../../network.pm_.c:334
-msgid " (driver $module)"
-msgstr ""
-
-#: ../../network.pm_.c:336 ../../standalone/draknet_.c:231
-#: ../../standalone/draknet_.c:427
-#, fuzzy
-msgid "IP address"
-msgstr "Chomlec'h IP :"
-
-#: ../../network.pm_.c:337 ../../standalone/draknet_.c:428
-#, fuzzy
-msgid "Netmask"
-msgstr "Maskl rouedad :"
-
-#: ../../network.pm_.c:338
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network.pm_.c:338
-msgid "Automatic IP"
-msgstr "IP emgefreek"
-
-#: ../../network.pm_.c:359 ../../printerdrake.pm_.c:102
-#: ../../printerdrake.pm_.c:425
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Er furmad 1.2.3.4 e tlefe bezañ ar chomlec'h IP"
-
-#: ../../network.pm_.c:388
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Roit ho anv ostiz mar plij.\n"
-"Un anv peurzoareet a zlefe bezañ hini o ostiz,\n"
-"evel ``mabenveg.mastal.makomp.com''.\n"
-"Gallout a rit ivez reiñ chomlec'h IP an dreuzell m'hoc'h eus unan"
-
-#: ../../network.pm_.c:393
-msgid "DNS server"
-msgstr "Servijer DNS"
-
-#: ../../network.pm_.c:394 ../../standalone/draknet_.c:565
-msgid "Gateway"
-msgstr "Treuzell"
-
-#: ../../network.pm_.c:396
-msgid "Gateway device"
-msgstr "Trobarzhell an dreuzell"
-
-#: ../../network.pm_.c:407
-#, fuzzy
-msgid "Proxies configuration"
-msgstr "Kefluniadur goude staliañ"
-
-#: ../../network.pm_.c:408
-msgid "HTTP proxy"
-msgstr "Proksi HTTP"
-
-#: ../../network.pm_.c:409
-msgid "FTP proxy"
-msgstr "Proksi FTP"
-
-#: ../../network.pm_.c:412
-msgid "Proxy should be http://..."
-msgstr "http://... a zlefe bezañ ar proksi"
-
-#: ../../network.pm_.c:413
-msgid "Proxy should be ftp://..."
-msgstr "ftp://... a zlefe bezañ ar proksi"
-
-#: ../../partition_table.pm_.c:563
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:581
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Un toull a zo en ho taolenn barzhañ hogen n'hellan ket e implijout.\n"
-"Fiñval ar parzhadurioù kentañ derez evit ma vo an toull stok ouzh ar "
-"parzhadurioù astennet eo an diskoulm"
-
-#: ../../partition_table.pm_.c:675
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fazi en ur lenn ar restr %s"
-
-#: ../../partition_table.pm_.c:682
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Assevel adalek ar restr %s sac'het %s"
-
-#: ../../partition_table.pm_.c:684
-msgid "Bad backup file"
-msgstr "Restr gwareziñ siek"
-
-#: ../../partition_table.pm_.c:706
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fazi en ur skrivañ er restr %s"
-
-#: ../../partition_table_raw.pm_.c:161
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "a rankfec'h kaout"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "a-bouez"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "brav-tre"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "brav"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "marteze"
-
-#: ../../printer.pm_.c:20
-msgid "Local printer"
-msgstr "Moullerez lec'hel"
-
-#: ../../printer.pm_.c:21
-#, fuzzy
-msgid "Remote printer"
-msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#: ../../printer.pm_.c:23
-#, fuzzy
-msgid "Remote lpd server"
-msgstr "lpd a-bell"
-
-#: ../../printer.pm_.c:24
-#, fuzzy
-msgid "Network printer (socket)"
-msgstr "Dibarzhoù ar voullerez NetWare"
-
-#: ../../printer.pm_.c:25
-msgid "SMB/Windows 95/98/NT"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:26
-msgid "NetWare"
-msgstr "NetWare"
-
-#: ../../printer.pm_.c:27 ../../printerdrake.pm_.c:158
-#: ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Printer Device URI"
-msgstr "Trobarzhell ar voullerez"
-
-#: ../../printerdrake.pm_.c:19
-msgid "Test ports"
-msgstr "Amprouiñ ar porzhioù"
-
-#: ../../printerdrake.pm_.c:40
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Ur voullerez, doare \"%s\", zo bet dinoet war "
-
-#: ../../printerdrake.pm_.c:52
-msgid "Local Printer Device"
-msgstr "Trobarzhell voullerez lec'hel"
-
-#: ../../printerdrake.pm_.c:53
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Ouzh pe drobarzhell eo luget ho moullerez  \n"
-"(taolit evezh /dev/lp0 a zo kevatal da LPT1:) ?\n"
-
-#: ../../printerdrake.pm_.c:55
-msgid "Printer Device"
-msgstr "Trobarzhell ar voullerez"
-
-#: ../../printerdrake.pm_.c:74
-msgid "Remote lpd Printer Options"
-msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#: ../../printerdrake.pm_.c:75
-msgid ""
-"To use a remote lpd print queue, you need to supply\n"
-"the hostname of the printer server and the queue name\n"
-"on that server which jobs should be placed in."
-msgstr ""
-"A-benn implijout ur steud moulañ lpd a-bell, ret eo deoc'h\n"
-"pourvezañ anv ostiz ar servijer moullañ hag anv as steud\n"
-"war ar servijer-se ma zlefe bezañ kaset an dleadoù moullañ."
-
-#: ../../printerdrake.pm_.c:78
-msgid "Remote hostname"
-msgstr "Anv an ostiz a-bell"
-
-#: ../../printerdrake.pm_.c:79
-msgid "Remote queue"
-msgstr "Steud a-bell"
-
-#: ../../printerdrake.pm_.c:88
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Dibarzhoù moullañ SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:89
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Evit moullañ war ur voullerez SMB eo ret deoc'h pourvezañ\n"
-"anv an ostiz SMB (Ho evezh ! Disheñvel e c'hell bezañ diouzh\n"
-"e anv ostiz TCP/IP !) ha marteze chomlec'h IP ar servijer moullañ,\n"
-"kement hag anv rannet ar voullerez a glaskit tizhout ha ne vern pe\n"
-"ditour a anv arveriad, tremenger ha strollad labour en implij."
-
-#: ../../printerdrake.pm_.c:94
-msgid "SMB server host"
-msgstr "Anv ar servijer SMB"
-
-#: ../../printerdrake.pm_.c:95
-msgid "SMB server IP"
-msgstr "IP ar servijer SMB"
-
-#: ../../printerdrake.pm_.c:96
-msgid "Share name"
-msgstr "Anv rannet"
-
-#: ../../printerdrake.pm_.c:99
-msgid "Workgroup"
-msgstr "Strollad labour"
-
-#: ../../printerdrake.pm_.c:124
-msgid "NetWare Printer Options"
-msgstr "Dibarzhoù ar voullerez NetWare"
-
-#: ../../printerdrake.pm_.c:125
-msgid ""
-"To print to a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Evit moullañ war ur voullerez NetWare eo ret deoc'h pourvezañ anv ar\n"
-"servijer moullañ NetWare (Ho evezh ! Disheñvel e c'hell bezañ diouzh e\n"
-"anv ostiz TCP/IP !) kement hag anv ar steud moullañ evit ar voullerez\n"
-"a glaskit tizhout ha ne vern pe anv arveriad ha tremenger en implij."
-
-#: ../../printerdrake.pm_.c:129
-msgid "Printer Server"
-msgstr "Servijer moullañ"
-
-#: ../../printerdrake.pm_.c:130
-msgid "Print Queue Name"
-msgstr "Anv ar steud moullañ"
-
-#: ../../printerdrake.pm_.c:142
-#, fuzzy
-msgid "Socket Printer Options"
-msgstr "Dibarzhoù ar voullerez NetWare"
-
-#: ../../printerdrake.pm_.c:143
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"hostname of the printer and optionally the port number."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:145
-#, fuzzy
-msgid "Printer Hostname"
-msgstr "Dibarzhoù ar voullerez"
-
-#: ../../printerdrake.pm_.c:146 ../../printerdrake.pm_.c:422
-#, fuzzy
-msgid "Port"
-msgstr "Paour"
-
-#: ../../printerdrake.pm_.c:159
-msgid "You can specify directly the URI to access the printer with CUPS."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:192 ../../printerdrake.pm_.c:244
-msgid "What type of printer do you have?"
-msgstr "Peseurt moullerez hoc'h eus ?"
-
-#: ../../printerdrake.pm_.c:204 ../../printerdrake.pm_.c:305
-msgid "Do you want to test printing?"
-msgstr "Ha mennout a rit amprouiñ moullañ skrid ?"
-
-#: ../../printerdrake.pm_.c:207 ../../printerdrake.pm_.c:316
-msgid "Printing test page(s)..."
-msgstr "O voullañ pajenn(où) skrid..."
-
-#: ../../printerdrake.pm_.c:214 ../../printerdrake.pm_.c:324
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer daemon.\n"
-"This may take a little time before printer start.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-"Does it work properly?"
-msgstr ""
-"Pajenn(où) arnod zo bet kaset d'an diaoul moullañ.\n"
-"Ur pennadig e c'hell padout a-raok ma loc'hfe a voullerez.\n"
-"Stad ar moullañ :\n"
-"%s\n"
-"\n"
-"Ha mont a ra en-dro reizh ?"
-
-#: ../../printerdrake.pm_.c:218 ../../printerdrake.pm_.c:328
-msgid ""
-"Test page(s) have been sent to the printer daemon.\n"
-"This may take a little time before printer start.\n"
-"Does it work properly?"
-msgstr ""
-"Pajenn(où) arnod zo bet kaset d'an diaoul moullañ.\n"
-"Ur pennadig e c'hell padout a-raok ma loc'hfe a voullerez.\n"
-"Ha mont a ra en-dro reizh ?"
-
-#: ../../printerdrake.pm_.c:234
-msgid "Yes, print ASCII test page"
-msgstr "Ya, moullit ur bajenn arnod ASCII"
-
-#: ../../printerdrake.pm_.c:235
-msgid "Yes, print PostScript test page"
-msgstr "Ya, moullit ur bajenn arnod PostScript"
-
-#: ../../printerdrake.pm_.c:236
-msgid "Yes, print both test pages"
-msgstr "Ya, moullit an div bajenn arnod"
-
-#: ../../printerdrake.pm_.c:243
-msgid "Configure Printer"
-msgstr "Kefluniañ ar voullerez"
-
-#: ../../printerdrake.pm_.c:273
-msgid "Printer options"
-msgstr "Dibarzhoù ar voullerez"
-
-#: ../../printerdrake.pm_.c:274
-msgid "Paper Size"
-msgstr "Ment ar paper"
-
-#: ../../printerdrake.pm_.c:275
-msgid "Eject page after job?"
-msgstr "Stlepel ar bajenn goude moullañ ?"
-
-#: ../../printerdrake.pm_.c:280
-msgid "Uniprint driver options"
-msgstr "Dibarzhoù ar sturier Uniprint"
-
-#: ../../printerdrake.pm_.c:281
-msgid "Color depth options"
-msgstr "Dibarzhoù donder liv"
-
-#: ../../printerdrake.pm_.c:283
-msgid "Print text as PostScript?"
-msgstr "Moullañ skrid evel PostScript ?"
-
-#: ../../printerdrake.pm_.c:285
-msgid "Fix stair-stepping text?"
-msgstr "Kempenn an efed-diri ?"
-
-#: ../../printerdrake.pm_.c:287
-msgid "Number of pages per output pages"
-msgstr "Niver a bajennoù dre bajenn ziskas"
-
-#: ../../printerdrake.pm_.c:288
-msgid "Right/Left margins in points (1/72 of inch)"
-msgstr "Marzoù Dehoù/Kleiz e poentoù (1/72 ur meudad)"
-
-#: ../../printerdrake.pm_.c:289
-msgid "Top/Bottom margins in points (1/72 of inch)"
-msgstr "Marzoù Krec'h/Traoñ e poentoù (1/72 ur meudad)"
-
-#: ../../printerdrake.pm_.c:291
-msgid "Extra GhostScript options"
-msgstr "Dibarzhoù GhostScript ouzhpenn"
-
-#: ../../printerdrake.pm_.c:293
-msgid "Extra Text options"
-msgstr "Dibarzhoù skrid ouzhpenn"
-
-#: ../../printerdrake.pm_.c:295
-msgid "Reverse page order"
-msgstr "Eilpennañ urzh ar pajennoù"
-
-#: ../../printerdrake.pm_.c:345
-msgid "Would you like to configure a printer?"
-msgstr "Mennout a rit kefluniañ ur voullerez ?"
-
-#: ../../printerdrake.pm_.c:351
-msgid ""
-"Here are the following print queues.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Setu da heul ar steudadoù moullañ.\n"
-"Gallout a rit ouzhpennañ lod pe gemmañ a re a zo."
-
-#: ../../printerdrake.pm_.c:370
-#, fuzzy
-msgid "CUPS starting"
-msgstr "O vrasjediñ"
-
-#: ../../printerdrake.pm_.c:370
-msgid "Reading CUPS drivers database..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:384 ../../printerdrake.pm_.c:450
-#: ../../printerdrake.pm_.c:471 ../../printerdrake.pm_.c:479
-msgid "Select Printer Connection"
-msgstr "Diuzit lugerezh ar voullerez"
-
-#: ../../printerdrake.pm_.c:385 ../../printerdrake.pm_.c:472
-msgid "How is the printer connected?"
-msgstr "Penaos eo luget ar voullerez ?"
-
-#: ../../printerdrake.pm_.c:392
-#, fuzzy
-msgid "Select Remote Printer Connection"
-msgstr "Diuzit lugerezh ar voullerez"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"With a remote CUPS server, you do not have to configure\n"
-"any printer here; printers will be automatically detected.\n"
-"In case of doubt, select \"Remote CUPS server\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-"With a remote CUPS server, you do not have to configure\n"
-"any printer here; printers will be automatically detected\n"
-"unless you have a server on a different network; in the\n"
-"latter case, you have to give the CUPS server IP address\n"
-"and optionally the port number."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "IP ar servijer SMB"
-
-#: ../../printerdrake.pm_.c:429
-msgid "Port number should be numeric"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:451 ../../printerdrake.pm_.c:480
-msgid "Remove queue"
-msgstr "Lemel ar steudad"
-
-#: ../../printerdrake.pm_.c:454
-msgid ""
-"Name of printer should contains only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:461
-#, fuzzy
-msgid ""
-"Every printer need a name (for example lp).\n"
-"Other parameters such as the description of the printer or its location\n"
-"can be defined. What name should be used for this printer and\n"
-"how is the printer connected?"
-msgstr ""
-"Pep steud moullañ (m'eo kaset an dleadoù moullañ davetañ) en deus\n"
-"ezhomm un anv (lp alies) hag ur renkell spool kevret gantañ. Pe anv\n"
-"ha renkell a zo da implijout evit ar steud-mañ ha penaos eo luget ar "
-"voullerrez ?"
-
-#: ../../printerdrake.pm_.c:465
-#, fuzzy
-msgid "Name of printer"
-msgstr "Moullerez lec'hel"
-
-#: ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Description"
-msgstr "Spisait dibarzhoù"
-
-#: ../../printerdrake.pm_.c:467
-#, fuzzy
-msgid "Location"
-msgstr "Titouroù"
-
-#: ../../printerdrake.pm_.c:482
-msgid ""
-"Every print queue (which print jobs are directed to) needs a\n"
-"name (often lp) and a spool directory associated with it. What\n"
-"name and directory should be used for this queue and how is the printer "
-"connected?"
-msgstr ""
-"Pep steud moullañ (m'eo kaset an dleadoù moullañ davetañ) en deus\n"
-"ezhomm un anv (lp alies) hag ur renkell spool kevret gantañ. Pe anv\n"
-"ha renkell a zo da implijout evit ar steud-mañ ha penaos eo luget ar "
-"voullerrez ?"
-
-#: ../../printerdrake.pm_.c:489
-msgid "Name of queue"
-msgstr "Anv ar steud"
-
-#: ../../printerdrake.pm_.c:490
-msgid "Spool directory"
-msgstr "Renkell ar spool"
-
-#: ../../printerdrake.pm_.c:491
-msgid "Printer Connection"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../raid.pm_.c:33
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "N'hellan ket ouzhpennañ ur parzhadur da RAID md%d _furmadet_"
-
-#: ../../raid.pm_.c:103
-msgid "Can't write file $file"
-msgstr "N'hellan ket skrivañ e $file"
-
-#: ../../raid.pm_.c:128
-msgid "mkraid failed"
-msgstr "mkraid sac'het"
-
-#: ../../raid.pm_.c:128
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid sac'het (raidtools a vank emichañs ?)"
-
-#: ../../raid.pm_.c:144
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ket a-walc'h a parzhadurioù evit RAID live %d\n"
-
-#: ../../services.pm_.c:16
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:17
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, ur steuñvaer urzhiadoù mareadek."
-
-#: ../../services.pm_.c:18
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"servijout a ra apmd evit evezhiañ stad an daspugner hag he enrollañ dre "
-"syslog.\n"
-"Gallout a ra ivez servijout da lazhañ an ardivink pa vez izel an daspugner."
-
-#: ../../services.pm_.c:20
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Seveniñ an urzhiadoù steuñvaet gant an urzhiad at d'ar pred laket pa 'z eo\n"
-"bet sevenet at, ha seveniñ urzhiadoù dre lod pa 'z eo izel a-walc'h ar garg."
-
-#: ../../services.pm_.c:22
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Ur goulev standard UNIX eo cron evit seveniñ goulevioù diouzh c'hoant an\n"
-"arveriaded da goulzoù mareadek steuñvaet. vixie cron a ouzhpenn kalzig a "
-"arc'hweloù\n"
-"d'ar cron UNIX diazez, en o zouez surentez ha dibarzhoù kefluniañ gwelloc'h."
-
-#: ../../services.pm_.c:25
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM a zegas implij al logodenn d'an arloadoù Linux mod-skrid evel\n"
-"Midnight Commander. Reiñ a ra tu da seveniñ obererezhoù troc'hañ-ha-pegañ,\n"
-"ha skor evit meuziadoù kemperzhel war al letrin."
-
-#: ../../services.pm_.c:28
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:30
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Ur servijer evit ar Gwiad Bedel eo Apache. Implijet e vez evit servijañ\n"
-"restroù HTML ha CGI."
-
-#: ../../services.pm_.c:32
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"An diaoul gourservijer kenrouedad (anvet inetd ordinal) a loc'h ur\n"
-"bochad a servijoù kenrouedad all diouzh an ezhomm. E karg loc'hañ meur a "
-"servijoù\n"
-"eo, en o zouez telnet, ftp, rsh, and rlogin. Dizoberiañ inetd a zizoberia\n"
-"an holl servijoù m'eo eñ atebek warno."
-
-#: ../../services.pm_.c:36
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ar pakad-mañ a garg ar stokellaoueg diuzet evel termenet e\n"
-"/etc/sysconfig/keyboard. Dre ar maveg kbdconfig e c'hell bezañ diuzet\n"
-"kement-se. Gwell deoc'h leuskel se gweredekaet war darn vuiañ an ardivinkoù."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:44
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:46
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"An diaoul moullañ ret evit ma dafez en-ro reizh lpr eo lpd. Dre vras\n"
-"ez eo ur servijer a vera dleadoù moullañ evir ar voullerez(ed)."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) a zo ur Servijer Anvioù Domani (DNS) a zo implijet evit\n"
-"amdreiñ anvioù ostiz e chomlec'hioù IP."
-
-#: ../../services.pm_.c:52
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Evit marc'hañ ha divarc'hañ poentoù marc'hañ an holl Reizhiadoù Restroù\n"
-"Rouedad (NFS), SMB (Lan Manager/Windows) ha NCP (NetWare)."
-
-#: ../../services.pm_.c:54
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Oberia/Dizoberia an holl etrefasoù rouedad kefluniet da lañsañ\n"
-"da vare al loc'hañ."
-
-#: ../../services.pm_.c:56
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS a zo ur c'homenad brudet evit rannañ restroù dre rouedadoù TCP/IP.\n"
-"Ar servij-mañ a bourvez arc'hweloù ur servijer NFS, a vez kefluniaet dre ar\n"
-"restr /etc/exports."
-
-#: ../../services.pm_.c:59
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS a zo ur c'homenad brudet evit rannañ restroù dre rouedadoù\n"
-"TCP/IP. Ar servij-mañ a bourvez un arc'hwel morailhañ restroù NFS."
-
-#: ../../services.pm_.c:61
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:64
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Skorañ PCMCIA a zegas an tu da implijonut traoù evel ethernet ha modemoù\n"
-"e urzhiataeroù hezoug. Ne vo ket kroget hep bezañ bet kefluniet, rak-se eo "
-"diarvar\n"
-"e staliañ war ardivinkoù n'o deus ket ezhomm anezhañ."
-
-#: ../../services.pm_.c:67
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Ar c'hartenner porzhioù a vera kevreadennoù RPC, a zo implijet gant\n"
-"komenadoù evel NFS ha NIS. Ar servijer kartenn-porzhioù a rankfe mont en-"
-"dro\n"
-"war ardivinkoù anezho servijerien komenadoù a implij ar reizhiad  RPC."
-
-#: ../../services.pm_.c:70
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Ur Gwazour Treuzdougen Postel eo Postfix, a zo ar goulev a\n"
-"zilech posteloù etre un ardivink hag un all."
-
-#: ../../services.pm_.c:72
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Enroll hag assav poul dizurzh ar reizhiad evit genel niveroù\n"
-"dargouezhek gant gwelloc'h perzhded."
-
-#: ../../services.pm_.c:74
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"An diaoul routed a ro an tu da vremanaat ent emgefreek an taolenn henchañ\n"
-"IP dre ar c'homenad RIP. Tra ma vez implijet aliesig RIP war rouedadoù "
-"bihan,\n"
-"ezhomm a zo komenadoù henchañ kemplezhoc'h evit rouedadoù rouestlet."
-
-#: ../../services.pm_.c:79
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Ar c'homenad rstat a ro tu da implijerien ur rouedad da zastum\n"
-"muzulioù barregezh diwar ne vern pe ardivink er rouedad-se."
-
-#: ../../services.pm_.c:81
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Ar c'homenad rusers a ro tu da implijerien ur rouedad da anavezout piv\n"
-"a zo kevreet ouzh ardivinkoù all a respont."
-
-#: ../../services.pm_.c:83
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Ar c'homenad rwho a bourchas da implijerien a-bell roll an holl arveriaded a "
-"zo\n"
-"kevreet ouzh un ardivink ma da en-dro warnañ an diaoul rwhod (heñvel ouzh "
-"finger)."
-
-#: ../../services.pm_.c:85
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:86
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog a zo ur gwazerezh ma enroll drezañ an diaouled niverus o "
-"c'hemennadoù\n"
-"e kerzhlevrioù liesseurt ar reizhiad. Ur mennozh mat eo seveniñ ingal syslog."
-
-#: ../../services.pm_.c:88
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:89
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Enaou ha dizenaou ar servijer Fontoù X da vare al loc'hañ hag al lazhañ."
-
-#: ../../services.pm_.c:118
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Dibabit pe servijoù a zlefe bezañ lañset ent emgefreek pa loc'her"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "running"
-msgstr "Ho evezh"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "stopped"
-msgstr "Ouzhpennañ"
-
-#: ../../services.pm_.c:151
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:156
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:163
-#, fuzzy
-msgid "On boot"
-msgstr "Gwrizienn"
-
-#: ../../standalone/diskdrake_.c:67
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"N'hellañ ket lenn ho taolenn barzhañ, re vrein eo evidon :(\n"
-"Klask a rin kenderc'hel en ur ziverkañ ar parzhadurioù siek"
-
-#: ../../standalone/drakgw_.c:37 ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet Connection Sharing"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/drakgw_.c:118
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:119
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:123
-#, fuzzy
-msgid "disable"
-msgstr "Taolenn"
-
-#: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148
-#, fuzzy
-msgid "reconfigure"
-msgstr "Kefluniañ X"
-
-#: ../../standalone/drakgw_.c:126
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "O tinoiñ trobarzhelloù..."
-
-#: ../../standalone/drakgw_.c:134
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/drakgw_.c:143
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:144
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:148
-#, fuzzy
-msgid "enable"
-msgstr "Taolenn"
-
-#: ../../standalone/drakgw_.c:155
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:160
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/drakgw_.c:168
-msgid "Config file content could not be interpreted."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-msgid "Unrecognized config file"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:181
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:207
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:208
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "dedennus"
-
-#: ../../standalone/drakgw_.c:216
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:217
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:224
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:233
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:242
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid "Potential LAN address conflict found in current config of $_!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:261 ../../standalone/drakgw_.c:267
-#, fuzzy
-msgid "Firewalling configuration detected!"
-msgstr "o lenn ar c'hefluniadur"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:276
-#, fuzzy
-msgid "Configuring..."
-msgstr "Kefluniañ IDE"
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:307
-#, fuzzy
-msgid "Problems installing package $_"
-msgstr "O staliañ ar pakad %s"
-
-#: ../../standalone/drakgw_.c:590
-msgid "Congratulations!"
-msgstr "Gourc'hemennoù!"
-
-#: ../../standalone/drakgw_.c:591
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:608
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:609
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:610
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/drakgw_.c:615
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/drakgw_.c:622
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/draknet_.c:59
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../standalone/draknet_.c:66 ../../standalone/draknet_.c:539
-#, fuzzy
-msgid "Profile: "
-msgstr "marc'hañ sac'het :"
-
-#: ../../standalone/draknet_.c:74
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:108
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:114
-msgid "Name of the profile to create:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:140
-#, fuzzy
-msgid "Hostname: "
-msgstr "Anv an ostiz :"
-
-#: ../../standalone/draknet_.c:147
-#, fuzzy
-msgid "Internet access"
-msgstr "dedennus"
-
-#: ../../standalone/draknet_.c:160
-#, fuzzy
-msgid "Type:"
-msgstr "Seurt : "
-
-#: ../../standalone/draknet_.c:163 ../../standalone/draknet_.c:354
-msgid "Gateway:"
-msgstr "Treuzell :"
-
-#: ../../standalone/draknet_.c:163 ../../standalone/draknet_.c:354
-#, fuzzy
-msgid "Interface:"
-msgstr "dedennus"
-
-#: ../../standalone/draknet_.c:168
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:170 ../../standalone/draknet_.c:357
-#: ../../standalone/net_monitor_.c:122 ../../standalone/net_monitor_.c:224
-#, fuzzy
-msgid "Connected"
-msgstr "Anv ar gevreadenn"
-
-#: ../../standalone/draknet_.c:170 ../../standalone/draknet_.c:357
-#: ../../standalone/net_monitor_.c:83 ../../standalone/net_monitor_.c:122
-#: ../../standalone/net_monitor_.c:224
-#, fuzzy
-msgid "Not connected"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/draknet_.c:173 ../../standalone/draknet_.c:358
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:173 ../../standalone/draknet_.c:358
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:191
-#, fuzzy
-msgid "Starting your connection..."
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../standalone/draknet_.c:199
-#, fuzzy
-msgid "Closing your connection..."
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../standalone/draknet_.c:204
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-
-#: ../../standalone/draknet_.c:207
-#, fuzzy
-msgid "The system is now disconnected."
-msgstr "Da beseurt pladenn e mennit dilec'hiañ ?"
-
-#: ../../standalone/draknet_.c:219
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Kefluniañ servijoù"
-
-#: ../../standalone/draknet_.c:226 ../../standalone/draknet_.c:411
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Kefluniadur"
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "Adapter"
-msgstr "Bremanaat"
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "Driver"
-msgstr "Servijer"
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "Interface"
-msgstr "dedennus"
-
-#: ../../standalone/draknet_.c:231
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:250
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../standalone/draknet_.c:283
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Boas"
-
-#: ../../standalone/draknet_.c:288
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:307
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Amprouiñ ar c'hefluniadur"
-
-#: ../../standalone/draknet_.c:391
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:415
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "Kefluniadur"
-
-#: ../../standalone/draknet_.c:423
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:429
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:430
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:466 ../../standalone/draknet_.c:470
-#, fuzzy
-msgid "Disable"
-msgstr "Taolenn"
-
-#: ../../standalone/draknet_.c:466 ../../standalone/draknet_.c:470
-#, fuzzy
-msgid "Enable"
-msgstr "Taolenn"
-
-#: ../../standalone/draknet_.c:504
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:528
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/draknet_.c:532
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/draknet_.c:541
-#, fuzzy
-msgid "Connection type: "
-msgstr "Anv ar gevreadenn"
-
-#: ../../standalone/draknet_.c:547
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-#, fuzzy
-msgid "Provider dns 1 (optional)"
-msgstr "Dibarzhoù ar voullerez"
-
-#: ../../standalone/draknet_.c:561
-#, fuzzy
-msgid "Provider dns 2 (optional)"
-msgstr "Dibarzhoù ar voullerez"
-
-#: ../../standalone/draknet_.c:574
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:575
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Bezit deuet mat, preizherien !"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Paour"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Ankeniet"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ret eo implijout al live-mañ gant evezh. Ober a ra d'ho reizhiad bezañ\n"
-"aesoc'h da implijout, hogen kizidig-tre : arabat e implj evit un ardivink\n"
-"kevreet ouzh lod all pe ouzh ar genrouedad. N'eus ket a haeziñ dre dremenger."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Gweredekaet eo bremañ an tremenger, hogen dierbedet eo c'hoazh an implij en "
-"ur rouedad"
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Nebeut a wellaenoù evit al live surentez-mañ, an hini pouezusañ eo bezañ\n"
-"muioc'h a evezhiadennoù hag a wiriadennoù surentez."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Setu al live surentez standard a vez erbedet evit un urzhiataer a vo "
-"implijet\n"
-"evit kevreañ evel arval ouzh ar Genrouedad. Bremañ ez eus gwiriadennoù "
-"surentez."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Gant al live surentez-mañ e teu posupl implijout ar reizhiad-mañ evel ur "
-"servijer.\n"
-"Uhel a-walc'h eo bremañ ar surentez evit implijout ar reizhiad evel ur "
-"servijer\n"
-"o tigemer kevreadennoù a-berzh arvaloù niverus."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Kemer a reomp arc'hweloù al live 4, hogen bremañ eo peurserret ar reizhiad.\n"
-"Arc'hweloù surentez a zo en o muiañ"
-
-#: ../../standalone/draksec_.c:52
-msgid "Setting security level"
-msgstr "O termeniñ al live surentez"
-
-#: ../../standalone/drakxconf_.c:44
-#, fuzzy
-msgid "Control Center"
-msgstr "Anv ar gevreadenn"
-
-#: ../../standalone/drakxconf_.c:45
-msgid "Choose the tool you want to use"
-msgstr "Dibabit ar benveg a vennit staliañ"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:23
-#, fuzzy
-msgid "Change Cd-Rom"
-msgstr "Kemmañ ar spister"
-
-#: ../../standalone/livedrake_.c:24
-#, fuzzy
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Kemmit ho Cd-Rom!\n"
-"\n"
-"Lakait el lenner ar Cd-Rom warnañ an diketenn \"%s\" mar plij ha gwaskit Mat "
-"eo da c'houde.\n"
-"Ma n'emañ ket ganeoc'h gwaskit Nullañ evit chom hep staliañ ar Cd-Rom-se."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:50
-msgid "no serial_usb found\n"
-msgstr "serial_usb kavet ebet\n"
-
-#: ../../standalone/mousedrake_.c:54
-msgid "Emulate third button?"
-msgstr "Kendarvan an trede nozelenn ?"
-
-#: ../../standalone/mousedrake_.c:131
-#, fuzzy
-msgid "Test the mouse here."
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../standalone/net_monitor_.c:40 ../../standalone/net_monitor_.c:52
-#, fuzzy
-msgid "Network Monitoring"
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../standalone/net_monitor_.c:56
-msgid "Statistics"
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:59
-msgid "Sending Speed: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:61
-msgid "Receiving Speed: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:66
-#, fuzzy
-msgid "Close"
-msgstr "Logodenn USB"
-
-#: ../../standalone/net_monitor_.c:100 ../../standalone/net_monitor_.c:104
-#, fuzzy
-msgid "Connecting to Internet "
-msgstr "Anv ar gevreadenn"
-
-#: ../../standalone/net_monitor_.c:100 ../../standalone/net_monitor_.c:104
-#, fuzzy
-msgid "Disconnecting from Internet "
-msgstr "Anv ar gevreadenn"
-
-#: ../../standalone/net_monitor_.c:114
-#, fuzzy
-msgid "Disconnection from Internet failed."
-msgstr "Anv ar gevreadenn"
-
-#: ../../standalone/net_monitor_.c:115
-#, fuzzy
-msgid "Disconnection from Internet complete."
-msgstr "Anv ar gevreadenn"
-
-#: ../../standalone/net_monitor_.c:117
-#, fuzzy
-msgid "Connection complete."
-msgstr "Anv ar gevreadenn"
-
-#: ../../standalone/net_monitor_.c:118
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:188
-msgid "sent: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:191
-msgid "received: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:222
-#, fuzzy
-msgid "Connect"
-msgstr "Anv ar gevreadenn"
-
-#: ../../standalone/net_monitor_.c:222
-#, fuzzy
-msgid "Disconnect"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/tinyfirewall_.c:29
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "o lenn ar c'hefluniadur"
-
-#: ../../standalone/tinyfirewall_.c:42
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "o lenn ar c'hefluniadur"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:10
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Linux Mandrake machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:15
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:22
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:27
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:32
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:37
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:42
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:47
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:52
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:57
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:62
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:67
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:83
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:85
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Fazi en ur zigeriñ %s evit skrivañ : %s"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Development"
-msgstr "Diorren/C"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "Titouroù"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Graphics"
-msgstr "Liesvedia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet"
-msgstr "dedennus"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Dibarzhoù ar voullerez NetWare"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Kefluniañ ar proksioù"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Burev"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Liesvedia"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Teuliadur"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Sound"
-msgstr "Liesvedia"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Titouroù"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Video"
-msgstr "Liesvedia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Dibarzhoù ar voullerez NetWare"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "Titouroù"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - CD Burning"
-msgstr "Liesvedia"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "servijer X"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Kefluniadur"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "KDE Workstation"
-msgstr "Titouroù"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "Titouroù"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "dedennus"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Teuliadur"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#, fuzzy
-#~ msgid "%d seconds"
-#~ msgstr "Kuitaat e %d eilenn"
-
-#, fuzzy
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "Kefluniadur"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Diuzit ar restr"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Kefluniañ ur rouedad"
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "Kefluniañ IDE"
-
-#, fuzzy
-#~ msgid "Standard tools"
-#~ msgstr "Diorren"
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Kefluniadur : Ouzhpennañ al lec'hiadur"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "An urzhiaoueg loc'hañ a glask kargañ molladoù evit ho logodenn usb."
-
-#, fuzzy
-#~ msgid "Boot style configuration"
-#~ msgstr "Kefluniadur goude staliañ"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Sujedigezh emgefreek"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Kefluniañ LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Krouiñ ur bladennig loc'hañ"
-
-#~ msgid "Format floppy"
-#~ msgstr "Furmadiñ ar bladennig"
-
-#~ msgid "Choice"
-#~ msgstr "Dibab"
-
-#, fuzzy
-#~ msgid "gMonitor"
-#~ msgstr "Skramm"
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Gallout a rit bremañ diuz bibarzhoù a bep seurt evit ho reizhiad.\n"
-#~ "\n"
-#~ "  - Implijit gwellaennoù ar bladenn galet : Gwellaat dehaezadur ar "
-#~ "bladenn galet\n"
-#~ "    a c'hell an dibarzh-mañ, evit implijerien barrek hepken : amredoù "
-#~ "dreinek a\n"
-#~ "    c'hell freuziñ ho roadoù, diwallit 'ta. Ur roll parzhoù siek a zeu "
-#~ "gant ar\n"
-#~ "    graoñiell, laoskit an dibarzh didermenet avat evit bezañ kuit a "
-#~ "souezhadenn.\n"
-#~ "\n"
-#~ "  - Dibabit al live surentez : Gallout a rit dibab ul live surentez evit "
-#~ "ho\n"
-#~ "    reizhiad. Sellit en dornlevr evit muioc'h a ditouroù mar plij. Dre "
-#~ "vras :\n"
-#~ "    ma ne ouzit ket, diuzit \"Etre\" ; ma vennit da vat kaout un ardivink "
-#~ "sur\n"
-#~ "    dibabit \"Ankeniet\" met taolit evezh : EL LIVE-SE, N'EO KET AOTREET "
-#~ "EREAÑ\n"
-#~ "    EVEL ROOT WAR AL LETRIN ! Ma vennit bezañ root, e rankit ereañ evel\n"
-#~ "    arverdiad hag implijout \"su\" da c'houde. Pelloc'h, na soñjit ket\n"
-#~ "    implijout ho ardivink estreget evel servijer. Grit ho soñj.\n"
-#~ "\n"
-#~ "  - Spisait RAM diouzh ret : siwazh gant PCoù hiziv, n'eus ket a hentenn\n"
-#~ "    standard evit atersiñ ar BIOS a-zivout ar c'hementad a RAM hegerz war "
-#~ "ho\n"
-#~ "    urzhiataer. Da heul, Linux a c'hell na zinoiñ reizh ho kementad a "
-#~ "RAM.\n"
-#~ "    M'eo kont evel-se e c'hellit spisaat amañ ar c'hementad a RAM a "
-#~ "zere.\n"
-#~ "    Ho evezh : un diforzh a 2 pe 4Mo a zo reizh.\n"
-#~ "\n"
-#~ "  - Emvarc'hañ ar media lem-laka : Ma gavit gwelloc'h na varc'hañ dre an "
-#~ "dorn\n"
-#~ "    ar pladennoù lem-laka (CD-ROM, pladennig, Zip) dre urzhiañ \"mount\" "
-#~ "hag\n"
-#~ "    \"umount\", diuzit an dibarzh-mañ.\n"
-#~ "\n"
-#~ "  - Enaouiñ KrouilhNiv pa loc'her : ma gavit mat KrouilhNiv enaouet pa "
-#~ "loc'her\n"
-#~ "    diuzit an dibarzh-mañ (Evezh : ne daio ket en-dro dre ret dindan X)."
-
-#~ msgid "Miscellaneous"
-#~ msgstr "A bep seurt"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Goulennoù a bep seurt"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "N'hellan ket implijout supermount el live surentez uhel"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Servijer DNS kentañ"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Eil servijer DNS"
-
-#~ msgid "loopback"
-#~ msgstr "saveteiñ"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Pe garger(ien) loc'hañ a vennit imlijout ?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Pladennig staliañ emgefreek"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Klask kavout ur modem ?"
-
-#~ msgid "Multimedia"
-#~ msgstr "Liesvedia"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Kefluniañ an takad-eur"
-
-#~ msgid "Configure printer"
-#~ msgstr "Kefluniañ ar voullerez"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(a c'hell breinañ roadoù)"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "Implijout gwelladur ar bladenn galet ?"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Enaouiñ KrouilhNiv pa loc'her"
-
-#~ msgid "DNS server:"
-#~ msgstr "Servijer DNS :"
-
-#~ msgid "Gateway device:"
-#~ msgstr "Trobarzhell an dreuzell :"
-
-#~ msgid "default"
-#~ msgstr "dre ziouer"
-
-#~ msgid "Customized"
-#~ msgstr "Neuziet"
-
-#, fuzzy
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Ha sur oc'h bezañ ur mailh ? \n"
-#~ "Na rit ket goap, traoù galloudus hogen arvarus a vo aotreet deoc'h amañ."
-
-#~ msgid "Use shadow file"
-#~ msgstr "Implijout ur restr kuzhet"
-
-#~ msgid "shadow"
-#~ msgstr "kuzhet"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Implijout tremegerioù MD5"
-
-#~ msgid "Search"
-#~ msgstr "Klask"
-
-#~ msgid "Package"
-#~ msgstr "Pakad"
-
-#~ msgid "Text"
-#~ msgstr "Skrid"
-
-#~ msgid "Tree"
-#~ msgstr "Gwezenn"
-
-#~ msgid "Sort by"
-#~ msgstr "Rummañ dre"
-
-#~ msgid "Category"
-#~ msgstr "Rummad"
-
-#~ msgid "See"
-#~ msgstr "Sellet"
-
-#~ msgid "Installed packages"
-#~ msgstr "Pakadoù staliet"
-
-#~ msgid "Available packages"
-#~ msgstr "Pakadoù hegerz"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Diskouez an delioù hepken"
-
-#~ msgid "Expand all"
-#~ msgstr "Astenn pep tra"
-
-#~ msgid "Collapse all"
-#~ msgstr "Plegañ pep tra"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Ouzhpennañ lec'hiadur ar pakadoù"
-
-#~ msgid "Update location"
-#~ msgstr "Bremanaat al lec'hiadur"
-
-#~ msgid "Remove"
-#~ msgstr "Dilemel"
-
-#~ msgid "Find Package"
-#~ msgstr "Kavout ur pakad"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Kavout ur pakad ennañ ur restr"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Gwintañ etre Staliet hag Hegerz"
-
-#~ msgid "Uninstall"
-#~ msgstr "Distaliañ"
-
-#~ msgid "Choose package to install"
-#~ msgstr "Dibabit pakadoù da staliañ"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "O wiriañ sujedigezhioù"
-
-#~ msgid "Wait"
-#~ msgstr "Gortoz"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Ar pakadoù a-heul a zo war-nes bezañ distaliet"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "O tistaliañ ar RPMoù"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Pe bakad a glask"
-
-#~ msgid "%s not found"
-#~ msgstr "%s ket kavet"
-
-#~ msgid "No match"
-#~ msgstr "Klotadur ebet"
-
-#~ msgid "No more match"
-#~ msgstr "Klotadur ouzphenn ebet"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "Emañ rpmdrake er mod ``memor izel'' evit poent.\n"
-#~ "Adlañsañ a rin rpmdrake tuchantik evit aotren da glask restroù"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Pe restr emaoc'h o klask ?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Petra emaoc'h o klask ?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Roit din un anv (da sk. `ouzhpenn', `kenwerzhel')"
-
-#~ msgid "Directory"
-#~ msgstr "Renkell"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Cdrom hegerz ebet (netra e /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL ar renkell enni ar RPMoù"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Evit FTP hag HTTP eo ret deoc'h reiñ lec'hiadur an hdlist\n"
-#~ "Da geñver an URL a-us e rank bezañ"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Leugnit ar stlenn a-heul mar plij"
-
-#~ msgid "%s is already in use"
-#~ msgstr "War implij eo %s endeo"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "O vremanaat an diaz RPMoù"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "War-nes dilemel an enmont %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "O klask delioù"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Klask delioù a bad ur frapadig"
-
-#~ msgid "mandatory"
-#~ msgstr "ret-groñs"
-
-#~ msgid "interesting"
-#~ msgstr "dedennus"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (a-bouez)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (brav-tre)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (brav)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Ouzh pe borzh a-steud eo luget ho logodenn ?"
-
-#~ msgid "Czech"
-#~ msgstr "Tchek"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovakek"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Pe seurt parzhadur a vennit ?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Linux-Mandrake "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Dibabit \"Staliañ\" ma n'eus ket a stumm kent Linux bet staliaet,\n"
-#~ "pe ma vennit implijout meur a stumm pe a zasparzhadenn.\n"
-#~ "\n"
-#~ "Dibabit \"Bremanaat\" ma vennit hizivaat ur stumm kent Mandrake Linux :\n"
-#~ "%s pe %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Diuzit :\n"
-#~ "\n"
-#~ "  - Emgefreek : Ma n'hoc'h eus morse staliaet Linux a-raok, dibabit se. "
-#~ "EVEZH :\n"
-#~ "    ne vo ket kefluniet a rouedad e-kerz ar staliadur, implijit "
-#~ "\"LinuxConf\"\n"
-#~ "    evit kefluniañ unan goude diwezh ar staliadur.\n"
-#~ "\n"
-#~ "  - Neuziet : Ma 'z oc'h kustumet a-walc'h gant GNU/Linux, tu vo neuze "
-#~ "deoc'h\n"
-#~ "    dibab an implij pennañ evit ho ardivink. Sellit a-is evit munudoù.\n"
-#~ "\n"
-#~ "  - Mailh : Ma 'z oc'h en ho pleud gant GNU/Linux ha mennet da seveniñ\n"
-#~ "    ur staliadur neuziet-tre. Evel evit ar renkad staliañ \"Neuziet\" e "
-#~ "vo\n"
-#~ "    tu deoc'h diuz an implij evit hor reizhiad.\n"
-#~ "    Hogen mar plij, NA ZIBABIT KET SE NEMET MA OUZIT PEZH EMAOC'H OC'H "
-#~ "OBER !\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Linux-Mandrake system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "D'ar poent-mañ, e c'hellit dibab pe barzhadur(ioù) implijout evit\n"
-#~ "staliañ ho reizhiad Linux-Mandrake, ma 'z int bet termenet endeo (diwar\n"
-#~ "ur staliadur kent Linux pe diwar ur benveg parzhañ all). E degouezhoù\n"
-#~ "all, ret eo termeniñ parzhadurioù ar bladenn galet. Talvezout a ra an\n"
-#~ "obererezh-se kement ha rannañ dre meiz egor pladenn galet an urzhiataer\n"
-#~ "e takadoù distag o implij.\n"
-#~ "\n"
-#~ "\n"
-#~ "M'hoc'h eus da grouiñ parzhadurioù nevez, implijit \"Ac'hubiñ ent "
-#~ "emgefreek\"\n"
-#~ "a-benn krouiñ parzhadurioù evit Linux ent engrefreek. Gallout a rit diuz\n"
-#~ "ar bladenn da parzhañ dre glikañ war \"hda\" evit an drobarzhell IDE "
-#~ "kentañ,\n"
-#~ "\"hdb\" evit an eil pe \"sda\" evit an drobarzhell SCSI kentañ hag all.\n"
-#~ "\n"
-#~ "\n"
-#~ "Daou barzhadur boutin-tre a zo : ar parzhadur gwrizienn (/), a zo penn\n"
-#~ "kentañ urzhaz renkelloù ar reizhiad restroù, ha /boot, a zo ennañ an "
-#~ "holl\n"
-#~ "restroù ret evit loc'hañ ar reizhiad korvoiñ p'emeur o paouez enaouiñ\n"
-#~ "an urzhiataer.\n"
-#~ "\n"
-#~ "\n"
-#~ "Gant ma n'heller ket diverkañ efedoù an argerzh-mañ, parzhañ a c'hell\n"
-#~ "bezañ abafus ha bec'hius d'an arveriad deraouat. DiskDrake a aesa kement\n"
-#~ "an argerzh ha n'eus ket aon da gaout. Sellit ouzh an teuliadur hag it\n"
-#~ "war ho pouez a-raok kregiñ ganti.\n"
-#~ "\n"
-#~ "Gallout a rit tizhout kement dibarzh 'zo gant ar stokelloù : merdeiñ dre "
-#~ "ar parzhadurioù\n"
-#~ "gant Tab ha biroù Laez/Traoñ. P'hoc'h eus diuzet ur parzhadur, grit "
-#~ "gant :\n"
-#~ "\n"
-#~ "- Ctrl-c  evit krouiñ ur parzhadur nevez (m'eo goullo ar parzhadur "
-#~ "diuzet)\n"
-#~ "\n"
-#~ "- Ctrl-d  evit lemel ur parzhadur\n"
-#~ "\n"
-#~ "- Ctrl-m  evit termeniñ ar poent marc'hañ\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Kement parzhadur a zo bet nevez termenet a zle bezañ furmadet a-benn\n"
-#~ "e implijout (furmadiñ a dalvez krouiñ ur reizhiad restroù). Er poent-se,\n"
-#~ "e c'hellit mennout adfurmadiñ parzhadurioù 'zo o vezañ endeo evit "
-#~ "diverkañ\n"
-#~ "ar roadoù a zo enno. Ho evezh : n'eo ket ret adfurmadiñ parzhadurioù o\n"
-#~ "vezañ endeo, dreist-holl ma 'z eus enno restroù pe roadoù a vennit "
-#~ "derc'hel.\n"
-#~ "Skouerioù dibar eo /home ha /usr."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Emañ ar pakadoù diuzet o vezañ staliaet bremañ. Un nebeut munut\n"
-#~ "e zlefe padout an obererezh-se nemet m'ho pije dibabet bremanaat\n"
-#~ "ur reizhiad o vezañ, en degouezh-se e c'hell kemer muioc'h a amzer\n"
-#~ "zoken a-raok na grogfe ar bremanaat."
-
-#, fuzzy
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Ma ne c'hell ket DrakX kavout ho logodenn, pe ma vennit\n"
-#~ "gwiriañ pezh en deus graet, kinniget e vo deoc'h ur roll\n"
-#~ "logodennou a-us.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ma 'z oc'h a-du gant kefluniadur DrakX, n'hoc'h eus ken nemet lammat\n"
-#~ "d'ar rann a fell deoc'h en ur glikañ el lañser a gleiz. Mod all,\n"
-#~ "dibabit el lañser ar seurt logodenn a gav deoc'h ez eo hini a zegouezh\n"
-#~ "ar gwellañ evit ho logodenn.\n"
-#~ "\n"
-#~ "Ma 'z eo ul logodenn a-steud, ret e vo ivez deoc'h lavaret da DrakX\n"
-#~ "war be borzh a-steud eo luget ho logodenn."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Linux-Mandrake system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Gouestlet eo ar rann-mañ da gefluniañ ur rouedad takad lec'hel\n"
-#~ "(LAN) pe ur modem.\n"
-#~ "\n"
-#~ "Dibabit \"Rouedad lec'hel\" ha DrakX a glasko kavout un azasaer\n"
-#~ "Ethernet war ho ardivink. Azasaerien PCI a zlefe bezañ kavet\n"
-#~ "ha deraouekaet ent emgefreek. Evelato, m'eo ho trobarzhell unan ISA,\n"
-#~ "ne daio ket en-dro an emzinoiñ, hag e vo ret deoc'h diuz ur sturier\n"
-#~ "diwar ar roll a zeuio war wel neuze.\n"
-#~ "\n"
-#~ "\n"
-#~ "Evel evit azasaerien SCSI e c'hellit leuskel ar sturier amprouiñ\n"
-#~ "an azasaer ar wech kentañ, mod all e vo ret deoc'h spisaat d'ar\n"
-#~ "sturier dibarzhoù ho pije tapet diwar teuliadur ho periant.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ma stalhit ur reizhiad Linux-Mandrake war un ardivink a zo\n"
-#~ "lodek en ur rouedad a zo c'hoazh, merour ar rouedad en devo\n"
-#~ "roet deoc'h an holl titouroù ret (chomlec'h IP, ismaskl rouedad\n"
-#~ "pe verroc'h rouedmaskl, hag anv ostiz). M'emaoc'h o sevel ur\n"
-#~ "rouedad prevez er gêr da skouer, mat e vije deoc'h dibab\n"
-#~ "chomlec'hioù \n"
-#~ "\n"
-#~ "Dibabit \"Sifrennañ gant ar modem\" hag e vo kefluniet ar gevreadenn\n"
-#~ "ouzh ar Genrouedad gant ur modem. Klask a raio DrakX kavout ho modem,\n"
-#~ "ma ne teu ket a-benn e vo ret deoc'h diuz ar porzh a-steud m'eo luget\n"
-#~ "ho modem outañ."
-
-#, fuzzy
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "Linux a oar en em zibab gant kalz a seurtoù moullerezed. Pep hini eus\n"
-#~ "ar seurtoù-se en deus ezhomm ur c'hefluniadur disheñvel. Taolit evezh\n"
-#~ "avat ar spooler moullañ a laka 'lp' da anv ar voullerrez dre ziouer ;\n"
-#~ "ret eo deoc'h eta kaout ur voullerez gant an anv-se ; hogen meur a anv,\n"
-#~ "pep hini dsipartiet gant an arouezenn '|', a c'hellit reiñ d'ur "
-#~ "voullerez.\n"
-#~ "Neuze, mar kavit gwelloc'h bezañ un anv splannoc'h, n'hoc'h eus ken "
-#~ "nemet\n"
-#~ "e lakaat da gentañ, da sk. \"Ma Voullerez|lp\".\n"
-#~ "Ar voullerez he deus \"lp\" en he anv(ioù) a vo hini dre ziouer.\n"
-#~ "\n"
-#~ "\n"
-#~ "M'eo luget ho moullerez end-eeun ouzh ho urzhiataer, diuzit\n"
-#~ "\"Moullerez lec'hel\". Neuze e rankot lavaret ouzh be borzh eo\n"
-#~ "luget ho moullerez, ha diuz ar sil a zere.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ma vennit tizhout ur voullerez a zo lec'hiet war un ardivink Unix\n"
-#~ "a-bell, rankout a reot diuz \"lpd a-bell\". Evit ma 'z afe en-dro,\n"
-#~ "n'eus ezhomm nag anv na tremenger, hogen e rankot anavezout anv\n"
-#~ "ar steud moullañ war ar servijer-se.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ma vennit tizhout ur voullerez SMB (da lavaret eo ur voullerez\n"
-#~ "lec'hiet war un ardivink Windows 9x/NT a-bell), e rankot spisaat\n"
-#~ "e anv SMB (n'eo ket e anv TCP/IP), ha marteze e chomlec'h IP, mui\n"
-#~ "an anv arveriad, ar strollad labour hag an tremenger ret a-benn tizhout\n"
-#~ "ar voullerez, hag evel-just anv ar voullerez. Heñvel tra evit ur\n"
-#~ "voullerez NetWare, war-bouez titour ar strollad labour a zo diezhomm."
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Disoñjal ar c'hemmoù"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Peseurt eo ho logodenn ?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Spisterioù emgefreek"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "A-benn kavout ar spisterioù hegerz e klaskin meur a hini.\n"
-#~ "C'hwildañ a raio ho skramm...\n"
-#~ "Gallout a rit e tizenaouiñ ma fell deoc'h, klevet a rit ur bip pa vo echu"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Klask kavout ar spisterioù hegerz a c'hellan (da sk. 800x600).\n"
-#~ "A-wechoù, evelato, e c'hell sac'hañ an ardivink.\n"
-#~ "Mennout a rit klask ?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Mod reizh ebet kavet\n"
-#~ "Klaskit gant ur gartenn video pe ur skramm all"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Klask ent emgefreek ar spisterioù"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Logodenn Apple ADB"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Logodenn Apple ADB (2 nozelenn)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Logodenn Apple ADB (3 nozelenn pe vuioc'h)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Logodenn Apple ADB "
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Logodenn Apple USB (2 nozelenn)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Logodenn Apple USB (3 nozelenn pe vuioc'h)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "Logodenn bus ATI"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Logodenn bus Microsoft"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logodenn bus Logitech"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "Logodenn USB (3 nozelenn pe vuioc'h)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Stumm 2.1A pe uheloc'h (a-steud)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (a-steud)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (a-steud)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (a-steud)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Logodenn rummel (a-steud)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Kenglotus Microsoft (a-steud)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Logodenn rummel 3 nozelenn (a-steud)"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "marc'hañ NFS sac'het"
-
-#~ msgid "CHAP"
-#~ msgstr "CHAP"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Rinegouriezh"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Ha mennout a rit kefluniañ ur rouedad lec'hel evit ho reizhiad ?"
-
-#~ msgid "Show less"
-#~ msgstr "Diskouez nebeutoc'h"
-
-#~ msgid "Show more"
-#~ msgstr "Diskouez muioc'h"
-
-#~ msgid "tie"
-#~ msgstr "frondenn"
-
-#~ msgid "brunette"
-#~ msgstr "duardez"
-
-#~ msgid "girl"
-#~ msgstr "plac'h"
-
-#~ msgid "woman-blond"
-#~ msgstr "meleganez"
-
-#~ msgid "automagic"
-#~ msgstr "emhud"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Petra eo reizhadur ho stokellaoueg ?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Klask kavout kartennoù PCMCIA ?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Klask kavout trobarzhelloù %s ?"
-
-#~ msgid "Modem Configuration"
-#~ msgstr "Kefluniañ ar modem"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr ""
-#~ "Ha mennout a rit kefluniañ ur gevreadenn gervel dre modem evit ho "
-#~ "reizhiad ?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Klask kavout trobarzhelloù PCI ?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "O klask ar parzhadur gwrizienn."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s : N'eo ket ur parzhadur gwrizienn, diuzit un all mar plij."
-
-#~ msgid "No root partition found"
-#~ msgstr "Parzhadur gwrizienn kavet ebet"
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr ""
-#~ "Dibabit ur parzhadur d'ober anezhañ ho parzhadur gwrizienn, mar plij."
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "N'hoc'h eus ket a-walc'h a egor evit Lnx4win !"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U Mo"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# '¤'    is the 'ñ' (ntilde) in cp437 encoding.
-# '\227' is the 'ù' (ugrave) in cp437 encoding. 
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Degemer mat e LILO, an dibaber reizhiad oberia¤ !\n"
-#~ "\n"
-#~ "Evit rolla¤ an dibabo— aotreet, stokit <TAB>.\n"
-#~ "\n"
-#~ "Evit karga¤ unan anezho, skrivit e anv ha stokit <ENKAS> pe c'hortozit %d "
-#~ "eilenn evit al loc'ha¤ dre ziouer.\n"
-#~ "\n"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Degemer mat e SILO, an dibaber reizhiad oberian~ !\n"
-#~ "\n"
-#~ "Evit rollan~ an dibabou aotreet, stokit <TAB>.\n"
-#~ "\n"
-#~ "Evit kargan~ unan anezho, skrivit e anv ha stokit <ENKAS> pe c'hortozit %"
-#~ "d eilenn evit al loc'han~ dre ziouer.\n"
-#~ "\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "Dibarzhoù pennañ SILO"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Setu da heul enmontoù a vez e SILO.\n"
-#~ "Gallout a rit ouzhpennañ lod pe gemmañ a re a zo."
-
-#~ msgid "This label is already in use"
-#~ msgstr "War implij eo ar skridennad-se endeo"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "Staliadur SILO zo sac'het. Degouezhet eo ar fazi a heul :"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX a glasko da gentañ kavout unan pe vuioc'h a azasaer SCSI PCI.\n"
-#~ "Ma gav anezhañ (pe anezho) ha ma oar pe sturier(ien) implijout, e (o)\n"
-#~ "enlakaat a raio ent emgefreek.\n"
-#~ "\n"
-#~ "\n"
-#~ "M'eo ho azasaer SCSI ur gartenn ISA, pe m'eo ur gartenn PCI hogen\n"
-#~ "ne oar ket DrakX pe sturier implijout evit ar gartenn-se, pe n'hoc'h eus\n"
-#~ "tamm azasaer SCSI ebet, goulennet e vo diganeoc'h neuze hag-eñ hoc'h\n"
-#~ "eus unan pe get. Ma n'hoc'h eus hini, eilgeriit \"Ket\". M'hoc'h eus\n"
-#~ "unan pe vuioc'h, eilgeriit \"Ya\". Ur roll sturierien a zeuio neuze\n"
-#~ "war wel, a vo ret deoc'h diuz unan anezho.\n"
-#~ "\n"
-#~ "\n"
-#~ "Goude m'ho po diuzet ar sturier, DrakX a c'houlenno ma vennit spisaat\n"
-#~ "dibarzhoù evitañ. Da gentañ, klaskit leuskel ar sturier amprouiñ\n"
-#~ "ar periant : peurliesañ e da mat en-dro.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ma ne ra ket, na zisoñjit ket an titouroù war ho periant a c'hellit\n"
-#~ "kavout en ho teuliadur pe digant Windows (m'hoc'h eus hemañ war ho\n"
-#~ "reizhiad), evel m'eo aliet gant ar sturlevr staliañ. An dibarzhoù a\n"
-#~ "vo ret deoc'h pourvezañ d'ar sturier eo a zo e kaoz."
-
-#~ msgid "Shutting down"
-#~ msgstr "O tizenaouiñ"
-
-#~ msgid "useless"
-#~ msgstr "diezhomm"
-
-#~ msgid "garbage"
-#~ msgstr "lastez"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Dibabit \"Staliañ\" ma n'eus ket a stumm kent Linux bet staliaet,\n"
-#~ "pe ma vennit implijout meur a stumm pe a zasparzhadenn.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dibabit \"Bremanaat\" ma vennit hizivaat ur stumm kent Mandrake Linux :\n"
-#~ "5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "pe 7.0 (Air)."
-
-#~ msgid "Creating and formatting loopback file %s"
-#~ msgstr "O krouiñ hag o furmadiñ ar restr saveteiñ %s"
-
-#~ msgid "Amusements/Games"
-#~ msgstr "Dudi/C'hoarioù"
-
-#~ msgid "Applications/Archiving"
-#~ msgstr "Arloadoù/Diellerezh"
-
-#~ msgid "Applications/CPAN"
-#~ msgstr "Arloadoù/CPAN"
-
-#~ msgid "Applications/Configuration"
-#~ msgstr "Arloadoù/Kefluniañ"
-
-#~ msgid "Applications/Engineering"
-#~ msgstr "Arloadoù/Kalvezerezh"
-
-#~ msgid "Applications/File"
-#~ msgstr "Arloadoù/Restr"
-
-#~ msgid "Applications/Finance"
-#~ msgstr "Arloadoù/Arc'hanterezh"
-
-#~ msgid "Applications/Internet"
-#~ msgstr "Arloadoù/Kenrouedad"
-
-#~ msgid "Applications/Multimedia"
-#~ msgstr "Arloadoù/Liesvedia"
-
-#~ msgid "Applications/Networking"
-#~ msgstr "Arloadoù/Rouedad"
-
-#~ msgid "Applications/Productivity"
-#~ msgstr "Arloadoù/Ampletusted"
-
-#~ msgid "Applications/Publishing/TeX"
-#~ msgstr "Arloadoù/Embann/TeX"
-
-#~ msgid "Applications/Text"
-#~ msgstr "Arloadoù/Skrid"
-
-#~ msgid "Base"
-#~ msgstr "Diazez"
-
-#~ msgid "Development/Debuggers"
-#~ msgstr "Diorren/Dizraenerien"
-
-#~ msgid "Development/Languages"
-#~ msgstr "Diorren/Aregoù"
-
-#~ msgid "Development/System"
-#~ msgstr "Diorren/Reizhiad"
-
-#~ msgid "Development/Tools"
-#~ msgstr "Diorren/Binvioù"
-
-#~ msgid "Extensions/Arabic"
-#~ msgstr "Astennoù/Arabeg"
-
-#~ msgid "Extensions/Chinese"
-#~ msgstr "Astennoù/Sineg"
-
-#~ msgid "Extensions/Japanese"
-#~ msgstr "Astennoù/Japaneg"
-
-#~ msgid "Libraries"
-#~ msgstr "Mezarc'hioù"
-
-#~ msgid "Networking/Daemons"
-#~ msgstr "Rouedad/Diaouled"
-
-#~ msgid "Networking/Utilities"
-#~ msgstr "Rouedad/Mavegoù"
-
-#~ msgid "System Environment/Base"
-#~ msgstr "Endro reizhiad/Diazez"
-
-#~ msgid "System Environment/Daemons"
-#~ msgstr "Endro reizhiad/Diaouled"
-
-#~ msgid "User Interface/Desktops"
-#~ msgstr "Etrefas arveriad/Gorretaol"
-
-#~ msgid "User Interface/X"
-#~ msgstr "Etrefas arveriad/X"
-
-#~ msgid "User Interface/X Hardware Support"
-#~ msgstr "Etrefas arveriad/Merañ ardivinkaj X"
-
-#~ msgid "Utilities/Archiving"
-#~ msgstr "Mavegoù/Diellerezh"
-
-#~ msgid "Utilities/System"
-#~ msgstr "Mavegoù/Reizhiad"
-
-#~ msgid "Utilities/Text"
-#~ msgstr "Mavegoù/Skrid"
-
-#~ msgid "X11/Amusements"
-#~ msgstr "X11/Dudi"
-
-#~ msgid "X11/Applications"
-#~ msgstr "X11/Arloadoù"
-
-#~ msgid "X11/Applications/Internet"
-#~ msgstr "X11/Arloadoù/Kenrouedad"
-
-#~ msgid "X11/Applications/Networking"
-#~ msgstr "X11/Arloadoù/Rouedad"
-
-#~ msgid "X11/Window Managers"
-#~ msgstr "X11/Merourien prenester"
-
-#~ msgid "Communications"
-#~ msgstr "Kehentiñ"
-
-#~ msgid "Databases"
-#~ msgstr "Stlennvonioù"
-
-#~ msgid "Development/C++"
-#~ msgstr "Diorren/C++"
-
-#~ msgid "Development/Databases"
-#~ msgstr "Diorren/Stlennvonioù"
-
-#~ msgid "Development/Kernel"
-#~ msgstr "Diorren/Kraoñell"
-
-#~ msgid "Editors"
-#~ msgstr "Aozerien"
-
-#~ msgid "Emulators"
-#~ msgstr "Kendarvanerezh"
-
-#~ msgid "Graphics"
-#~ msgstr "Grafek"
-
-#~ msgid "Publishing"
-#~ msgstr "Embann"
-
-#~ msgid "Shells"
-#~ msgstr "Shelloù"
-
-#~ msgid "Sound"
-#~ msgstr "Son"
-
-#~ msgid "System/Base"
-#~ msgstr "Reizhiad/Diazez"
-
-#~ msgid "System/Fonts/True type"
-#~ msgstr "Reizhiad/Nodrezhoù/True Type"
-
-#~ msgid "System/Libraries"
-#~ msgstr "Reizhiad/Mezarc'hioù"
diff --git a/perl-install/share/po/bs.po b/perl-install/share/po/bs.po
deleted file mode 100644
index 6f4f6b2a7..000000000
--- a/perl-install/share/po/bs.po
+++ /dev/null
@@ -1,9235 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# Vedran Ljubovic <vljubovic@smartnet.ba>, 2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-09-22 17:16GMT\n"
-"Last-Translator: Vedran Ljubovic <vljubovic@smartnet.ba>\n"
-"Language-Team: Bosnian <prijevodi@lugbih.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Konfiguriši sve glave odvojeno"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Koristi Xinerama ekstenziju"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfiguriši samo karticu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Multi-head konfiguracija"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Vaš sistem podržava konfiguraciju više glava.\n"
-"Šta želite u�initi?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Grafi�ka karta"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Izaberite grafi�ku kartu"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Izaberite X server"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Koju konfiguraciju XFree želite imati?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Vaša kartica može imati podršku za 3D hardversko ubrzanje ali samo sa\n"
-"XFree %s. Vašu karticu podržava XFree %s koji može imati bolju podršku za 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Vaša kartica može imati podršku za 3D hardversko ubrzanje sa XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s sa 3D hardverskim ubrzanjem"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Vaša kartica može imati podršku za 3D hardversko ubrzanje sa XFree %s,\n"
-"PAŽNJA OVO JE EKSPERIMENTALNA PODRŠKA I MOŽE ZALEDITI VAŠ RAČUNAR."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s sa EKSPERIMENTALNIM 3D hardverskim ubrzanjem"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Vaša kartica može imati podršku za 3D hardversko ubrzanje sa XFree %s,\n"
-"PAŽNJA OVO JE EKSPERIMENTALNA PODRŠKA I MOŽE ZALEDITI VAŠ RAČUNAR.\n"
-"Vašu karticu podržava XFree %s koji može imati bolju podršku za 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installation display driver)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree konfiguracija"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Izaberite veli�inu memorije vaše grafi�ke karte"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Izaberite opcije za server"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Izaberite monitor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva kriti�na parametra su brzina vertikalnog osvježenja, što je brzina\n"
-"kojom se cijeli ekran osvježava, i najvažnije brzina horizontalne\n"
-"sinhronizacije, Å¡to je brzina kojm se prikazuju skan-linije.\n"
-"\n"
-"VEOMA JE VAŽNO da ne navedete tip monitora �iji je sinhronizacioni\n"
-"raspon izvan mogućnosti vašeg monitora: time možete oštetiti monitor.\n"
-" Ako niste sigurni, izaberite najmanju opciju."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Brzina horizontalnog osvježavanja"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Brzina vertiaklnog osvježavanja"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Monitor nije konfigurisan"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Grafi�ka karta još uvijek nije konfigurisana"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Rezolucije još nisu odabrane"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Želite li testirati konfiguraciju?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Upozorenje: testiranje ove grafi�ke karte može zalediti ra�unar"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Testiranje konfiguracije"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"probajte izmjeniti neke parametre"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Došlo je do greške"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Napuštam za %d sekundi"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Da li je ovo ispravna vrijednost?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Došlo je do greške, probajte izmjeniti neke parametre"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Rezolucija"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Izaberite rezoluciju i dubinu boja"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafi�ka karta: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Expert mod"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Prikaži sve"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Rezolucije"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Raspored tastature: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tip miša: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Uređaj miša: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor HorizSync: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor VertRefresh: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafi�ka karta: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifikacija grafi�ke karte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafi�ka memorija: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Dubina boja: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolucija: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 drajver: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Pripremam X-Window konfiguraciju"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Šta želite u�initi?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Izmjena Monitora"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Izmjena Grafi�ke kartice"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Izmjena Server opcija"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Izmjena Rezolucije"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Prikaži informacije"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Testiraj ponovo"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Izlaz"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Zadržati izmjene?\n"
-"Trenutna konfiguracija je:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Molimo ponovo se prijavite na %s radi aktiviranja izmjena"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Molimo izvršite logout i zatim koristitite Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X u startanju"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Mogu podesiti vaš ra�unar da automatski pokrene X nakon boota.\n"
-"Želite li da se X pokrene kada bootate?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 boja (8 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 hiljada boja (15 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 hiljada boja (16 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miliona boja (24 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijarde boja (32 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB ili više"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standardna VGA, 640x480 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Kompatibilna, 1024x768 na 87 Hz sa preplitanjem (bez 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 na 87 Hz sa preplitanjem, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 na 60 Hz, 640x480 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 na 60 Hz, 800x600 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency koja može postići 1280x1024 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency koja može postići 1280x1024 na 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency koja može postići 1280x1024 na 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor koji može postići 1600x1200 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor koji može postići 1600x1200 na 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Prvi sektor boot particije"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Prvi sektor drajva (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILO instalacija"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Gdje želite smjestiti bootloader?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalacija"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO sa tekstualnim menijem"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO sa grafi�kim menijem"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Bootanje iz DOS/Windowsa (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Glavne opcije bootloadera"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Bootloader koji ćete koristiti"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Bootloader instalacija"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Boot uređaj"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne radi na starim BIOSima)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Kompaktno"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "kompaktno"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Video mod"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "ÄŒekanje prije bootanja default preslike"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Å ifra"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Å ifra (ponovo)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Ograni�i opcije komandne linije"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "ograni�i"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "ÄŒisti /tmp prilikom svakog boota"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precizna veli�ina RAMa ako je potrebno (pronađeno %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Omogući više profila"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Navedite veli�inu rama u MB"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcija ``Ograni�i opcije komandne linije'' je beskorisna bez šifre"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Molimo pokušajte ponovo"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Å ifre se ne poklapaju"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Init Poruka"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Otvori �ekanje firmware-a"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Kernel Boot Timeout"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Omogući boot sa CDa?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Omogući boot sa OFa?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Default OS?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Navedene su razne stavke.\n"
-"Možete dodati nove ili promjeniti postojeće."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Dodaj"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Gotovo"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Izmjeni"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Koju vrstu stavke želite dodati?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Ostali OSi (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Ostali OSi (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Ostali OSi (windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Preslika"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Čitaj-piši"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tabela"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Nesigurno"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Labela"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Default"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-veli�ina"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Ukloni stavku"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Prazna labela nije dozvoljena"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Ova labela je već u upotrebi"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Pronađeno %s %s interfejsa"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Imate li neki drugi?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Imate li ijedan %s interfejs?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Da"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Pogledaj hardware info"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaliram drajver za %s karticu %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Koji %s drajver ću pokušati?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"U nekim slu�ajevima, %s drajver treba imati dodatne informacije za\n"
-"ispravan rad, iako on obi�no radi dobro i bez njih. Želite li navesti neke\n"
-"ekstra opcije za njega ili dozvoliti drajveru da ispita vašu mašinu za sve\n"
-"informacije koje mu trebaju? Povremeno, ispitivanje može zaglaviti ra�unar,\n"
-"ali ne bi trebalo izazvati nikakvu Å¡tetu."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Ispitivanje"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Navedi opcije"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Sada možete navesti opcije modulu %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sada možete navesti opcije modulu %s. Opcije su u formatu ``ime=vrijednost "
-"ime2=vrijednost2 ...''.\n"
-"Na primjer, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Opcije modula"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"U�itavanje modula %s nije uspjelo.\n"
-"Želite li probati opet sa drugim parametrima?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(već dodan %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Ova šifra je previše jednostavna"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Molimo navedite korisni�ko ime"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Korisni�ko ime smije sadržati samo mala slova, brojeve, `-' i `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Ovo korisni�ko ime je već dodano"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Dodaj korisnika"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Unesite korisnika\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Prihvati korisnika"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Pravo ime"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Korisni�ko ime"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:757
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Mogu podesiti vaš ra�unar da automatski prijavi jednog korisnika.\n"
-"Želite li koristiti ovu mogućnost?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Izaberite default korisnika:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Izaberite window manager koji će se pokretati:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Molimo izaberite jezik koji ćete koristiti"
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "Možete izabrati i druge jezike koji će biti dostupni nakon instalacije"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Svi"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Dobro došli u %s izbornik operativnog sistema!\n"
-"\n"
-"Izaberite operativni sistem na listi gore ili\n"
-"sa�ekajte %d sekundi do default boota.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Dobro došli u GRUB izbornik operativnog sistema!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Koristite tipke %c i %c za izbor jedne od stavki."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite enter za bootanje izabranog OSa, 'e' za editovanje"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandi prije bootanja, ili 'c' za komandnu liniju."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Osvjetljene stavke će biti bootane automatski za %d sekundi."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "nema dovoljno prostora u /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:972
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Ne možete instalirati bootloader na %s particiju\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pomoć još nije implementirana.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfiguracija stila boota"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Datoteka"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>I"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Categorizing Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradicionalni Monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradicionalni Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Pokreni Aurora-u prilikom boota"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub mod"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Trenutno koristite %s kao boot manager.\n"
-"Kliknite na Konfiguriši kako bi se pokrenuo �arobnjak za podešavanje."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Konfiguriši"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Boot mod"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Sistem mod"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Pokreni X-Window sistem na startu"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Ne, ne želim da se autologiram"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Da, želim da se autologiram sa ovim (korisnik, desktop)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Odustani"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ne mogu otvoriti /etc/inittab za �itanje: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Instalacija LILOa nije uspjela. Javila se sljedeća greška:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuta"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minuta"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundi"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Molimo najprije napravite backup vaših podataka"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Pro�itajte pažljivo!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ako planirate koristiti aboot, budite pažljivi i ostavite slobodnog prostora "
-"(2048 sektora je dovoljno)\n"
-"na po�etku diska"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Greška"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "ÄŒarobnjak"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Novi"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "Udaljeni"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Ta�ka montiranja"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Opcije"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Tip"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Demontiraj"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Montiraj"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Izaberi akciju"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Imate jednu veliku FAT particiju\n"
-"(koju najvjerovatnije koristi MicroSoft Dos/Windows).\n"
-"Predlažem da najprije promjenite veli�inu te particije\n"
-"(kliknite na nju, zatim na \"Promjeni veli�inu\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Molimo kliknite na particiju"
-
-#: ../../diskdrake.pm_.c:240
-msgid "Please click on a media"
-msgstr "Molimo kliknite na medij"
-
-#: ../../diskdrake.pm_.c:243
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr ""
-"Molimo kliknite na dugme iznad\n"
-"\n"
-"Ili koristite \"Nova\""
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr "Koristi \"Nova\""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Detalji"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Prazno"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Ostalo"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Tipovi file sistema:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Kreiraj"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Koristite ``%s'' umjesto toga"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Obriši"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Najprije koristite ``Demontiraj''"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon promjene tipa particije %s, svi podaci na ovoj particiji će biti "
-"izgubljeni"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Gdje želite montirati uređaj %s?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "Opcije montiranja"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "Razni"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "Izmjenjivi medij"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "Promjeni tip"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Koji datote�ni sistem želite?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "Pretraga dostupnih nfs dijeljenih resursa"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "Pretraga dostupnih nfs dijeljenih resursa na serveru %s"
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr "Ako gornja lista ne sadrži ispravnu stavku, unesite je ovdje:"
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Server"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "Dijeljeni resurs"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "Pretraga dostupnih samba dijeljenih resursa"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "Pretraga dostupnih samba dijeljenih resursa na serveru %s"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "Izaberi particiju"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Izaberi drugu particiju"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Izlaz"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Prebaci u ekspertni mod"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Prebaci u normalni mod"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Poništi"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Svejedno nastavljate?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Izlaz bez spašavanja"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Izlazite bez pisanja tabele particija?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Želite li spasiti izmjene /etc/fstab"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Auto alokacija"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Obriši sve"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Još"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "Informacije o hard disku"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Nema dovoljno prostora za auto-alokaciju"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Sve primarne particije su u upotrebi"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Ne mogu dodati više particija"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Da biste imali još particija, molimo pobrišite jednu kako bi se mogla "
-"kreirati extended particija"
-
-#: ../../diskdrake_interactive.pm_.c:285
-msgid "Save partition table"
-msgstr "Snimi tabelu particija"
-
-#: ../../diskdrake_interactive.pm_.c:286
-msgid "Restore partition table"
-msgstr "Vrati tabelu particija"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Spasi tabelu particija"
-
-#: ../../diskdrake_interactive.pm_.c:289
-msgid "Reload partition table"
-msgstr "Ponovo u�itaj tabelu particija"
-
-#: ../../diskdrake_interactive.pm_.c:293
-msgid "Removable media automounting"
-msgstr "Automatsko montiranje izmjenjivog medija"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Izaberite datoteku"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Backup tabela particija nema istu veli�inu\n"
-"Ipak nastavljate?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Upozorenje"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Ubacite disketu u jedinicu\n"
-"Svi podaci na toj disketi će biti izgubljeni"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Pokušavam da spasim tabelu particija"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "Detaljne informacije"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Promjeni veli�inu"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Premještanje"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formatiraj"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Aktivna"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Dodaj na RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Dodaj na LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Ukloni sa RAIDa"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Ukloni sa LVMa"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Modificiraj RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Koristi za loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Napravi novu particiju"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Po�etni sektor: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Veli�ina u MB: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Tip datote�nog sistema: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Ta�ka montiranja: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Preference: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-msgid "Remove the loopback file?"
-msgstr "Ukloniti loopback datoteku?"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Izmjena tipa particije"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "Prebacujem sa ext2 na ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Gdje želite montirati loopback datoteku %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ne mogu izmjeniti ta�ku montiranja jer se ova particija koristi za "
-"loopback.\n"
-"Najprije uklonite loopback"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Izra�unavam granice FAT filesistema"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Mijenjam veli�inu"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Ovoj particiji ne možete mijenjati veli�inu"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Svi podaci na toj particiji bi trebali biti backupovani"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon promjene veli�ine particije %s, svi podaci na njoj će biti izgubljeni"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Izaberite novu veli�inu"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "Nova veli�ina u MB: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Na koji disk je želite premjestiti?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Na koji sektor je želite premjestiti?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Premještam"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Premještam particiju..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Izaberite postojeći RAID na koji ćete dodati"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "novi"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Izaberite postojeći LVM na koji ćete dodati"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "Naziv LVMa?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Ova particija se ne može koristiti za loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Naziv loopback datoteke: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-msgid "Give a file name"
-msgstr "Dajte naziv datoteke"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Datoteku već koristi drugi loopback, izaberite drugo ime"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Datoteka već postoji. Želite li je koristiti?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "uređaj"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "nivo"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "veli�ina chunka"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Budite oprezni: ova operacija je opasna"
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Koju vrstu particioniranja?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Žao mi je, ali još uvijek neću prihvatiti kreiranje /boota na drajvu (na "
-"cilindru >1024).\n"
-"Ili ćete koristiti LILO i stvar neće raditi, ili nećete koristiti LILO pa "
-"vam ne treba ni /boot"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Particija koju ste izabrali da dodate kao root (/) je fizi�ki locirana "
-"iznad\n"
-"1024og cilindra hard diska, tako da nemate /boot particiju.\n"
-"Ako planirate koristiti LILO boot manager, pazite da dodate /boot particiju"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Izabrali ste softversku RAID particiju kao root (/).\n"
-"Nijedan bootloader nije u mogućnosti da rukuje sa ovim bez /boot particije.\n"
-"Pazite da dodate /boot particiju"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Tabela particija za drajv %s će biti zapisana na disk!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Biće potrebno da rebootate prije nego što izmjene mogu stupiti na snagu"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon formatiranja particije %s, svi podaci na toj particiji će biti "
-"izgubljeni"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Formatiram"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatiram loopback datoteku %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiram particiju %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Hide files"
-msgstr "Sakrij datoteke"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Move files to the new partition"
-msgstr "Prebaci datoteke na novu particiju"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Direktorij %s već sadrži neke podatke\n"
-"(%s)"
-
-#: ../../diskdrake_interactive.pm_.c:906
-msgid "Moving files to the new partition"
-msgstr "Premještam datoteke na novu particiju"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr "Kopiram %s"
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, c-format
-msgid "Removing %s"
-msgstr "Uklanjam %s"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Uređaj: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS naziv drajva: %s (pretpostavka)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Tip: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Ime: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Po�etak: sector %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Veli�ina: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektora"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Cilindar %d do cilindra %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Formatirana\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Nije formatirana\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Montirana\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback datoteka(e):\n"
-"   %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Particija koja se boota po defaultu\n"
-"    (za MS-DOS boot, ne za lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivo %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Veli�ina chunka %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskovi %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Naziv loopback datoteke: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Postoji mogućnost da je ova\n"
-"particija Driver particija, vjerovatno\n"
-"biste je trebali ostaviti na miru.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ova posebna Bootstrap\n"
-"particija je za\n"
-"dvojni boot vašeg sistema.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Veli�ina: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskovi %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tip tabele particija: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na busu %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Opcije: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatiranje %s nije uspjelo"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ne znam kako formatirati %s tipa %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "montiranje nije uspjelo"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck nije uspio, izlazni kod %d ili signal %d"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "montiranje nije uspjelo: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "greška u demontiranju %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jednostavno"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Ne možete koristiti JFS za particije manje od 16MB"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Ne možete koristiti ReiserFS za particije manje od 32MB"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Ta�ke montiranja moraju po�injati sa /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Već postoji particija sa ta�kom montiranja %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ne možete koristiti LVM logi�ki volumen za ta�ku montiranja %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Ovaj direktorij treba ostati unutar korijenskog file sistema"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Potreban vam je pravi file sistem (ext2, reiserfs) za ovu ta�ku montiranja\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Greška u otvaranju %s za pisanje: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Došlo je do greške - nije pronađen nijedan ispravan uređaj na kojem se mogu "
-"kreirati novi file sistemi. Molimo provjerite vaš hardware i pronađite uzrok "
-"greške"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Nemate nijednu particiju!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Sada možete izabrati koje servise želite pokretati prilikom boota.\n"
-"\n"
-"Ovdje su predstavljeni svi servisi koji su dostupni u trenutnoj\n"
-"instalaciji. Pregledajte ih pažljivo i isklju�ite sve one koji nisu "
-"potrebni\n"
-"prilikom boota.\n"
-"\n"
-"Držanjem kursora miša na nazivu servisa možete dobiti kratki tekst\n"
-"objašnjenja. Ako niste sigurni da li je servis koristan ili ne, sigurnije "
-"je\n"
-"da ne mijenjate predloženi izbor.\n"
-"\n"
-"Budite vrlo pažljivi sa ovim korakom ako namjeravate koristiti vašu mašinu\n"
-"kao server: vjerovatno ne želite da pokrenete neke servise koji vam ne\n"
-"trebaju. Molimo vas da zapamtite da pojedini servisi mogu biti opasni\n"
-"ako su aktivni na serveru. Općenito, izaberite samo one servise koji vam\n"
-"stvarno trebaju."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux ra�una vrijeme u GMT (srednje grinvi�ko vrijeme) i prevodi ga\n"
-"u lokalno vrijeme ovisno o vremenskoj zoni koju ste izabrali."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Na ovom mjestu trebate izabrati gdje želite instalirati Linux Mandrake\n"
-"operativni sistem na vašem hard disku. Ako je disk prazan ili ako postojeći\n"
-"operativni sistem koristi sav prostor na njemu, potrebno je da ga\n"
-"particionirate. U biti, particioniranje hard diska predstavlja logi�ko\n"
-"organiziranje kako bi se stvorio prostor za instaliranje vašeg novog\n"
-"Mandrake Linux sistema.\n"
-"\n"
-"Pošto su efekti particioniranja obi�no nepovratni, particioniranje može\n"
-"biti zastrašujuće i stresno ako ste neiskusan korisnik. Srećom, postoji\n"
-"�arobnjak koji pojednostavljuje taj proces. Prije zapo�injanja, molimo\n"
-"konsultirajte priru�nik i nemojte žuriti.\n"
-"\n"
-"Ako instalirate koristeći Ekspertni mod, ući ćete u DiskDrake, Mandrake\n"
-"Linux alat za particioniranje, koji vam omogućava da fino podesite vaše\n"
-"particije. Pogledajte priru�nik, poglavlje o DiskDrake-u. Na instalacionom\n"
-"su�elju možete koristiti �arobnjake kao što je opisano tamo, klikajući na\n"
-"dugme ÄŒarobnjak.\n"
-"\n"
-"Ako su particije već definirane (tokom neke ranije instalacije ili pomoću\n"
-"nekog drugog alata za particioniranje), sve Å¡to trebate jeste da ih "
-"izaberete\n"
-"za instalaciju vašeg Linux sistema.\n"
-"\n"
-"Ako particije nisu već definirane, trebate ih kreirati koristeći �arobnjak.\n"
-"Ovisno o konfiguraciji vašeg hard diska, može biti dostupno nekoliko\n"
-"mogućnosti:\n"
-"\n"
-" * Koristi slobodan prostor: jednostavno vodi na automatsko particioniranje\n"
-"vašeg praznog diska (diskova). Neće biti postavljana nikakva daljnja "
-"pitanja.\n"
-"\n"
-" * Koristi postojeću particiju: �arobnjak je detektovao jednu ili više "
-"postojećih\n"
-"Linux particija na vašem hard disku. Ako ih želite zadržati, izaberite ovu\n"
-"opciju.\n"
-"\n"
-" * Koristi slobodan prostor na Windows particiji: ako je na vašem hard\n"
-"disku instaliran Microsoft Windows koji je zauzeo sav slobodan prostor,\n"
-"moraćete napraviti nešto slobodnog prostora za Linux. To možete u�initi\n"
-"brišući vašu Microsoft Windows particiju zajedno sa podacima (vidi opcije\n"
-"\"Pobriši �itav disk\" ili \"Expertni mod\") ili možete promjeniti veli�inu "
-"vaše\n"
-"Microsoft Windows particije. Promjena veli�ine se može izvršiti bez gubitka\n"
-"podataka. Ova mogućnost je preporu�ena ako namjeravate koristiti i Linux\n"
-"Mandrake i Microsoft Windows na istom ra�unaru.\n"
-"\n"
-"    Prije izbora ove opcije, molimo da imate na umu da će veli�ina vaše\n"
-"Microsoft Windows particije biti manja nego trenutno. To zna�i da će "
-"Microsoft\n"
-"Windows prijavljivati da imate manje prostora za smještaj podataka ili "
-"instaliranje\n"
-"novog softwarea.\n"
-"\n"
-" * Pobriši �itav disk: ako želite da obrišete sve podatke i sve particije\n"
-"koje su prisutne na vašem hard disku i umjesto njih postavite vaš novi "
-"Linux\n"
-"Mandrake sistem, možete izabrati ovu opciju. Budite oprezni sa ovom\n"
-"mogućnošću, jer nećete moći poništiti vaš izbor nakon potvrde.\n"
-"\n"
-"   !! Ako izaberete ovu opciju, svi podaci na vašem disku će biti "
-"izgubljeni. !!\n"
-"\n"
-" * Ukloni Windows: ovo će jednostavno pobrisati sve na disku i po�eti od\n"
-"po�etka, particionirajući ga. Svi podatci na vašem disku će biti "
-"izgubljeni.\n"
-"\n"
-"   !! Ako izaberete ovu opciju, svi podaci na vašem disku će biti "
-"izgubljeni. !!\n"
-"\n"
-" * Ekspertni mod: ako želite da ru�no particionirate vaš hard disk, "
-"izaberite ovu\n"
-"opciju. Budite oprezni - to je moćan, ali i opasan izbor. Vrlo lako možete\n"
-"izgubiti sve vaše podatke. Zato nemojte birati ovu opciju sem ako ste "
-"sigurni\n"
-"Å¡ta radite."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Sve particije koje su upravo definisane moraju biti formatirane kako bi se\n"
-"mogle koristiti (formatiranje zna�i kreiranje datote�nog sistema). \n"
-"\n"
-"U ovom trenutku možda ćete poželjeti da reformatirate neke već postojeće\n"
-"particije kako biste pobrisali podatke koje sadrže. Ako želite to u�initi, "
-"molim\n"
-"takođe izaberite te particije koje želite da formatirate.\n"
-"\n"
-"Molim obratite pažnju da nije neophodno formatirati sve postojeće "
-"particije.\n"
-"Morate reformatirati particije koje sadrže operativni sistem (kao što su\n"
-"\"/\", \"/usr\" ili \"var\") ali ne morate reformatirati particije koje "
-"sadrže\n"
-"podatke koje želite zadržati (tipi�no /home).\n"
-"\n"
-"Molimo da pažljivo izaberete particije. Nakon formatiranja, svi podaci na\n"
-"odabranim particijama će biti pobrisani i nećete biti u mogućnosti da ih\n"
-"povratite.\n"
-"\n"
-"Kliknite na OK kada budete spremni za formatiranje particija.\n"
-"\n"
-"Kliknite na Odustani ako želite da izaberete druge particije za instalaciju\n"
-"vašeg novog Linux-Mandrake operativnog sistema.\n"
-"\n"
-"Kliknite na Napredno da izaberete particije koje želite provjeriti radi\n"
-"loših blokova."
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Vaš novi Linux-Mandrake operativni sistem se trenutno intalira. Ovisno o\n"
-"broju paketa koje želite instalirati i brzini vašeg ra�unara, ova operacija\n"
-"bi mogla trajati nekoliko minuta ali i zna�ajno duže.\n"
-"\n"
-"Molim da imate strpljenja."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"Prije nego što nastavimo, trebate pažljivo pro�itati uvjete licence. Ona\n"
-"pokriva cijelu Mandrake Linux distribuciju, pa ako se ne slažete sa svim\n"
-"uvjetima u njoj, kliknite na dugme Odbij, što će automatski završiti "
-"instalaciju.\n"
-"Da biste nastavili sa instalacijom, kliknite na dugme Prihvati."
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-"Molimo da imate strpljenja. Ova operacija može potrajati nekoliko minuta."
-
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"DrakX sada mora znati da li želite obaviti podrazumjevanu instalaciju\n"
-"(\"Preporu�eno\") ili želite da imate veću kontrolu (\"Ekspert\"). Takođe\n"
-"imate izbor između instalacije novog ili unaprijeđenja postojećeg\n"
-"Mandrake Linux sistema. Klikom na \"Instaliraj\" ćete potpuno obrisati\n"
-"stari sistem. Izaberite \"Update\" ako unaprijeđujete ili popravljate\n"
-"postojeći sistem.\n"
-"\n"
-"Molimo izaberite \"Instaliraj\" ako nemate instaliranu neku raniju verziju\n"
-"Mandrake Linuxa ili ako želite bootati nekoliko operativnih sistema\n"
-"istovremeno.\n"
-"\n"
-"Molimo izaberite \"Update\" ako želite da updatujete ili popravite već\n"
-"instaliranu verziju Mandrake Linuxa.\n"
-"\n"
-"Ovisno o vašem poznavnaju GNU/Linuxa, molim izaberite jedan od sljedećih\n"
-"nivoa za instalaciju ili update vašeg Mandrake Linux operativnog sistema:\n"
-"\n"
-" * Preporu�eno: ako nikada niste instalirali GNU/Linux operativni sistem,\n"
-"izaberite ovo. Instalacija će biti veoma jednostavna i biće vam postavljeno\n"
-"svega par pitanja.\n"
-"\n"
-" * Ekspert: ako imate dobro znanje GNU/Linuxa, možete odabrati ovu klasu\n"
-"instalacije. Ekspertna instalacija vam omogućuje da obavite visoko "
-"prilagođenu\n"
-"instalaciju. Odgovor na neka pitanja može biti vrlo težak ako nemate dobro\n"
-"poznavanje GNU/Linuxa, zato nemojte birati ovo sem ako znate Å¡ta radite."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Molimo izaberite ispravan port. Na primjer, COM1 port pod MS Windowsom\n"
-"se zove ttyS0 pod GNU/Linuxom."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Morate navesti gdje želite smjestiti informacije koje su potrebne za\n"
-"bootanje GNU/Linuxa.\n"
-"\n"
-"Izaberite \"Prvi sektor na drajvu (MBR)\" sem ako znate ta�no šta radite."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX sada pronalazi sve IDE uređaje prisutne na vašem ra�unaru. Također\n"
-"će pretražiti sistem za jednu ili više PCI SCSI kartica. Ako SCSI kartica "
-"bude\n"
-"pronađena, DrakX će automatski instalirati odgovarajući drajver.\n"
-"\n"
-"Budući da pronalaženje hardware-a ponekad ne uspjeva pronaći neki dio\n"
-"hardware-a, DrakX će pitati za potvrdu da li imate SCSI karticu ili ne.\n"
-"Kliknite Da ako znate da postoji SCSI kartica instalirana na vašoj mašini.\n"
-"Biće vam predstavljena lista SCSI kartica koje možete izabrati. Kliknite Ne\n"
-"ako nemate nikakav SCSI hardware. Ako niste sigurni, možete pregledati "
-"listu\n"
-"hardware u vašoj mašini tako što ćete izabrati \"Vidi hardware info\" i "
-"kliknuti\n"
-"na OK. Pretražite listu hardware-a i zatim kliknite na dugme OK kako bi se\n"
-"vratili na pitanje o SCSI-ju.\n"
-"\n"
-"Ako morate ru�no odabrati adapter, DrakX će vas pitati da li želite navesti\n"
-"neke opcije za njega. Trebate dopustiti DrakXu da ispita hardware za\n"
-"neke opcije specifi�ne za tu karticu. Ovo obi�no radi dobro.\n"
-"\n"
-"Ako DrakX ne može ispitati opcije koje trebaju biti proslijeđene, moraćete\n"
-"ru�no navesti opcije za drajver. Molimo pogledajte Priru�nik za korištenje\n"
-"/User Guide/ (poglavlje 3, sekcija \"Prikupljanje informacija o vašem "
-"hardveru\")\n"
-"za napomene o pribavljanju ovih informacija iz hardverske dokumentacije,\n"
-"sa web stranice proizvođa�a (ako imate internet pristup) ili iz Microsoft\n"
-"Windowsa (ako ga imate na vašem sistemu)."
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Izaberite hard disk koji želite obrisati kako biste instalirali vašu novu "
-"Mandrake\n"
-"Linux particiju. Budite pažljivi, svi podaci koji se nalaze na njemu će "
-"biti\n"
-"izgubljeni i neće se moći vratiti!"
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-"Ne mogu pristupiti kernel modulima koji odgovaraju vašem kernelu (nedostaje "
-"datoteka %s)"
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Izabrali ste sljedeći server (servere): %s\n"
-"\n"
-"\n"
-"Ovi serveri su aktivirani automatski. Oni nemaju nikakvih poznatih "
-"sigurnosnih\n"
-"problema, ali možda će biti pronađeni neki novi. U tom slu�aju, morate ih\n"
-"unaprijediti što prije bude moguće.\n"
-"\n"
-"\n"
-"Da li zaista želite instalirati ove servere?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Ne mogu koristiti broadcast bez NIS domene"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ubacite FAT formatiranu disketu u drajv %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Ova disketa nije FAT (DOS/Windows) formatirana"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Da koristite ovaj izbor spašenih paketa, bootajte instalaciju sa ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Greška u �itanju datoteke %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Neki dio hardware-a na vašem ra�unaru zahtjeva ``posjedovane'' drajvere za "
-"rad.\n"
-"Možete naći više podataka o njima na: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Morate imati root particiju.\n"
-"Za ovo, kreirajte particiju (ili kliknite na neku od postojećih).\n"
-"Zatim izaberite ``Ta�ka montiranja'' i postavite ga na `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Morate imati swap particiju"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nemate nijednu swap particiju\n"
-"\n"
-"Svejedno nastavi?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Morate imati FAT particiju montiranu na /boot/efi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Koristi slobodan prostor"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Koristi postojeću particiju"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Nema nijedne postojeće particije za upotrebu"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Koristi Windows particiju za loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Koju particiju želite koristiti za Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Izaberite veli�ine"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Veli�ina root particije u MB:"
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Veli�ina swap particije u MB:"
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Koristi slobodan prostor na Windows particiji"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Kojoj particiji želite promjeniti veli�inu?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Izra�unavam granice Windows datote�nog sistema"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT resizer ne može izmjeniti vašu particiju, \n"
-"došlo je do sljedeće greške: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Vaša Windows particija je previše fragmentirana, molimo prvo pokrenite "
-"``defrag'' "
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"UPOZORENJE!\n"
-"\n"
-"DrakX će sada promjeniti veli�inu vaše Windows particije. Budite pažljivi, "
-"ova\n"
-"operacija je opasna. Ako to već niste uradili, najprije napustite "
-"instalaciju,\n"
-"pokrenite scandisk pod Windowsom (opcionalno pokrenite defrag), zatim\n"
-"ponovo pokrenite instalaciju. Također biste trebali spasiti sve podatke.\n"
-"Kada ste sigurni, kliknite na Ok."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Koju veli�inu želite da sa�uvate za windows na"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "particiji %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT promjena veli�ine nije uspjela: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ne postoji nijedna FAT particija za promjenu veli�ine ili upotrebu za "
-"loopback (ili nije ostalo dovoljno prostora)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Pobriši �itav disk"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Ukloni Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Imate više od jednog hard diska, na koji želite instalirati linux?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"SVE postojeće particije i podaci na njima će biti izgubljeni na disku %s"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Ru�no particioniranje diska"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Koristi fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Sada možete particionirati %s.\n"
-"Kada završite, ne zaboravite spasiti sa `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nemate dovoljno slobodnog prostora na vašoj Windows particiji"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Ne mogu naći dovoljno prostora za instalaciju"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX Particioni �arobnjak je našao sljedeća rješenja:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Particioniranje nije uspjelo: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Pokrećem mrežu"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Zaustavljam mrežu"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Došlo je do greške, ali ne znam kako da je riješim fino.\n"
-"Nastavite na vlastiti rizik."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dvostruka ta�ka montiranja %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Neki bitni paketi nisu ispravno instalirani.\n"
-"Ili je vaš cdrom drajv neispravan ili vaš cdrom medij.\n"
-"Provjerite cdrom na instaliranom ra�unaru koristeći \"rpm -qpl Mandrake/RPMS/"
-"*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Dobro došli u %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Nema pogodne disketne jedinice"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Prelazim na korak `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Izaberite veli�inu koju želite instalirati"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Ukupna veli�ina:"
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Verzija: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Veli�ina: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Izaberite pakete koje želite instalirati"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Info"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Instalacija"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Instaliram"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Molimo sa�ekajte, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Preostalo vremena "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Ukupno vrijeme "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Pripremam instalaciju"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaliram paket %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Svejedno nastavi?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Došlo je do greške pri naru�ivanju paketa:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Koristi postojeću konfiguraciju za X11?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Vaš sistem ima nizak nivo resursa. Možda imate neki problem sa instalacijom\n"
-"Mandrake Linuxa. Ako se ovo desi, možete pokušati tekstualnu instalaciju. Za "
-"ovo,\n"
-"pritisnite `F1' prilikom bootanja na CDROMu, zatim unesite `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Klasa instalacije"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Molimo izaberite jednu od sljedećih klasa instalacije:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ukupna veli�ina grupa koje ste izabrali je otprilike %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ako želite da instalirate manje od ove veli�ine,\n"
-"izaberite procenat paketa koje želite instalirati.\n"
-"\n"
-"Nizak procenat će instalirati samo one najbitnije pakete;\n"
-"procenat 100%% će instalirati sve izabrane pakete."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Na disku imate mjesta samo za %d%% ovih paketa.\n"
-"\n"
-"Ako želite da instalirate manje od ovoga,\n"
-"izaberite procenat paketa koje želite da instalirate.\n"
-"Nizak procenat će instalirati samo one najbitnije pakete;\n"
-"procenat %d%% će instalirati najveći mogući broj paketa."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-"Na idućem koraku ćete biti u mogućnosti da ih izaberete nešto preciznije."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procenat paketa za instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Izbor grupe paketa"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Izbor pojedina�nih paketa"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ukupna veli�ina: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Neispravan paket"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ime: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Zna�aj: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Ne možete izabrati ovaj paket jer nema dovoljno prostora za njega"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Sljedeći paketi će biti instalirani"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Sljedeći paketi će biti uklonjeni"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Ne možete izabrati/isklju�iti ovaj paket"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ovo je obavezan paket, ne može biti isklju�en"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Ne možete isklju�iti ovaj paket. On je već instaliran"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ovaj paket mora biti unaprijeđen\n"
-"Jeste li sigurni da ga želite isklju�iti?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ne možete isklju�iti ovaj paket. On mora biti unaprijeđen"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Automatski prikaži izabrane pakete"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "U�itaj/Spasi na disketu"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "Osvježavam izbor paketa"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "Minimalna instalacija"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Procjenjujem"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Molimo sa�ekajte, pripremam instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d paketa"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Prihvati"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Odbij"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Promjenite vaš CD-ROM!\n"
-"\n"
-"Molimo ubacite CD-ROM ozna�en sa \"%s\" u vaš drajv i pritisnite Ok kad ste "
-"spremni.\n"
-"Ako ga nemate, pritisnite Odustani da biste izbjegli instaliranje sa ovog CD-"
-"ROMa."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Došlo je do greške kod instaliranja paketa:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Došlo je do greške"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Licencni ugovor"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatura"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Molimo izaberite izgled vaše tastature."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Ovdje je puna lista svih dostupnih tastatura"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Koju klasu instalacije želite?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Instaliraj/Unaprijedi"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Da li je ovo instalacija ili update?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Preporu�eno"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Update"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Molimo izaberite vrstu vašeg miša."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Port miša"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Molimo izaberite na kojem serijskom portu je spojen vaš miš."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Emulacija tipki"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Emulacija 2 dugmeta"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Emulacija 3 dugmeta"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Podešavam PCMCIA kartice..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Podešavam IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "nema dostupnih particija"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Pretražujem particije da nađem ta�ke montiranja"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Izaberite ta�ke montiranja"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ne mogu pro�itati vašu tabelu particija, previše je oštećena za mene :(\n"
-"Mogu pokušati da pobrišem loše particije (SVI PODACI će biti izgubljeni!).\n"
-"Drugo rješenje je da onemogućim DrakX da mijenja tabelu particija.\n"
-"(greška je %s)\n"
-"\n"
-"Slažete li se sa gubitkom svih particija?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake nije uspio ispravno pro�itati tabelu particija.\n"
-"Nastavljate na vlastiti rizik!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nema dovoljno slobodnog prostora za 1 MB bootstrap! Instalacija će "
-"nastaviti, ali da biste bootali vaš sistem, morate kreirati bootstrap "
-"particiju u DiskDrake-u"
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "Nije pronađena nijedna root particija radi unaprjeđivanja"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Root particija"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Šta je root particija (/) vašeg sistema?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Moraćete rebootati da bi izmjene tabele particija stupile na snagu"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Izaberite particije koje želite formatirati"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Provjeri loše blokove?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Formatiram particije"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Kreiram i formatiram datoteku %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Nemam dovoljno swap prostora da dovršim instalaciju, molimo dodajte još"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Tražim dostupne pakete"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Pronalazim pakete za unaprjeđenje"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Vaš sistem nema dovoljno preostalog prostora za instalaciju ili unaprjeđenje "
-"(%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Potpuna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimalna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Preporu�ena (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Ru�no izaberi"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Molimo izaberite u�itaj ili spasi izbor paketa na disketu.\n"
-"Format je isti kao i diskete koje generiše auto_install"
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Vrati sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Vraćam sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Izbor paketa"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "Ubacite disketu koja sadrži izbor paketa"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Spasi na disketu"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Izabrana veli�ina je veća od slobodnog prostora"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ako imate sve CDe na listi, kliknite na Ok.\n"
-"Ako nemate nijedan od ovih CDova, kliknite na Odustani.\n"
-"Ako nedostaju samo neki CDovi, isklju�ite ih, zatim kliknite na Ok."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM pod oznakom \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instaliram paket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Post-instalacijsko podešavanje"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Molimo ubacite boot disketu koja je upotrebljena u jedinicu %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Molimo ubacite disketu Update Modula u drajv %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Izaberite mirror sa kojeg će biti dobavljeni paketi"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Kontaktiram mirror da bih saznao listu dostupnih paketa"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Molimo izaberite pakete koje želite instalirati."
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Koja je vaša vremenska zona?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "Hardverski sat podešen na GMT"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatska sinhronizacija vremena (koristeći NTP)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "NTP server"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Udaljeni CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Nema štampa�a"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Ukratko"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Miš"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Vremenska zona"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Štampa�"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDN kartica"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Zvu�na kartica"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV kartica"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Lokalne datoteke"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Podesite root Å¡ifru"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Bez Å¡ifre"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Ova šifra je previše jednostavna (mora biti duga najmanje %d karaktera)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Autentikacija"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "Autentikacijski LDAP"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "LDAP Server"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "Autentifikacija NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS domen"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS server"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Prva disketna jedinica"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Druga disketna jedinica"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Presko�i"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Žao mi je, nema dostupne disketne jedinice"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Izaberite disketnu jedinicu koju želite koristiti da napravite boot disketu"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Ubacite disketu u jedinicu %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Pravim boot disketu"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Pripremam bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Izgleda da imate OldWorld ili Unknown mašinu,\n"
-" yaboot bootloader neće raditi kod vas.\n"
-"Instalacija će se nastaviti, ali ćete\n"
-" morati koristiti BootX za bootanje vaše mašine"
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Da li želite koristiti aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Greška u instaliranju aboota, \n"
-"da li da pokušam nasilnu instalaciju �ak i ako to uništi prvu particiju?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-msgid "Installing bootloader"
-msgstr "Instaliram bootloadera"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalacija bootloadera nije uspjela. Došlo je do sljedeće greške:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Možda ćete trebati promjeniti vaš Open Firmware boot uređaj\n"
-" da biste aktivirali bootloader.  Ako ne vidite upit bootloadera\n"
-" prilikom bootanja, držite Command-Option-O-F prilikom boota\n"
-" i unesite:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Zatim kucajte: shut-down\n"
-"Prilikom idućeg boota biste trebali vidjeti upit bootloadera."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Nizak"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Srednji"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Visok"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Izaberite nivo sigurnosti"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ubacite praznu disketu u drajv %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Pravim auto instalacijsku disketu"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Neki koraci nisu dovršeni.\n"
-"\n"
-"Da li zaista želite izaći sada?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Čestitamo, instalacija je završena.\n"
-"Uklonite boot medij i pritisnite return za reboot.\n"
-"\n"
-"Za informacije o ispravkama koje su dostupne za ovu verziju Linux-Mandraka,\n"
-"pogledajte Errata koja je dostupna na http://www.linux-mandrake.com/.\n"
-"\n"
-"Informacije o podešavanju vašeg sistema su dostupne u poglavlju\n"
-"\"nakon instalacije\" vašeg Zvani�nog Mandrake Linux Priru�nika za Upotrebu."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Napravi auto instalacijsku disketu"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Ova auto instalacija može biti potpuno automatizovana ako želite,\n"
-"u kojem slu�aju će preuzeti hard disk!!\n"
-"(ovo je namjenjeno za instaliranje na drugu mašinu).\n"
-"\n"
-"Možda ćete željeti radije ponoviti instalaciju.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automatizovano"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Ponovi"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Spasi izbor paketa"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux instalacija %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> između elemenata  | <Space> vrši izbor | <F12> idući ekran "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu nedostaje"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "Izaberi datoteku"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Napredno"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Molimo sa�ekajte"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Proširi stablo"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Smanji stablo"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Prekida� između ravnog i grupnog sortiranja"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Ambiguity (%s), budite precizniji\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Pogrešan izbor, pokušajte ponovo\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (podrazumjevano %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Vaš izbor? (podrazumjevano %s)"
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Vaš izbor? (podrazumjevano %s  unesite `none' za ništa)"
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Češka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Njema�ka"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Å panska"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Finska"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Francuska"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norveška"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Poljska"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Ruska"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Å vedska"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "UK tastatura"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "US tastatura"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Albanska"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armenska (stara)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armenska (pisaća mašina)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armenska (fonetska)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbejdžanska (latinica)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belgijska"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bugarska"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilska (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Bjeloruska"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Švicarska (Njema�ki izgled)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Å vicarska (Francuski izgled)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Češka (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Njema�ka (bez mrtvih tipki)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Danska"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norveška)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estonska"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzijska (\"Ruski\" izgled)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzijska (\"Latini�ni\" izgled)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Gr�ka"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Mađarska"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Hrvatska"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Izraelska"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Izraelska (Fonetska)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iranska"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islandska"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Italijanska"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japanska 106 tipki"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Korejanska tastatura"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latino-Ameri�ka"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litvanska AZERTY (stara)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litvanska AYERTY (nova)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litvanska \"red brojeva\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanska \"fonetska\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-msgid "Latvian"
-msgstr "Latvijska"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Makedonska"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Holandska"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Poljska (qwerty)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Poljska (qwertz)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugalska"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Kanadska (Kvebek)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Rumunska (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Rumunska (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Ruska (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Slovena�ka"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slova�ka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slova�ka (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "Srpska (ćirilica)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Tajlandska tastatura"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr "Tadži�ka tastatura"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turska (tradicionalni \"F\" model)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turska (moderni \"Q\" model)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukrajinska"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "US tastatura (međunarodna)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vjetnamska \"red brojeva\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavenska (latini�no)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Kružno montiranje %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Najprije ukloni logi�ke volumene\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Opšti PS2 Miš sa kota�em"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 dugme"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Opšti"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Kota�"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "serijski"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Opšti miš sa 2 dugmeta"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Opšti miš sa 3 dugmeta"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serijski, stari C7 tip)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 dugmeta"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 dugmeta"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "nijedan"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Bez miša"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Molimo testirajte miš"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Da biste aktivirali miša,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "POMJERITE VAŠ KOTAČ!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Kraj"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Sljedeći ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Prethodni"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Da li je ovo ispravno?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Spoji se na Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Naj�ešći na�in za konekciju sa adsl-om je pppoe.\n"
-"Neke konekcije koriste pptp, a vrlo rijetke koriste dhcp.\n"
-"Ako ne znate, izaberite 'koristi pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "koristi dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "koristi pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "koristi pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Koji dhcp klijent želite koristiti?\n"
-"Podrazumjevani je dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nije pronađen ethernet mrežni adapter na vašem sistemu.\n"
-"Ne mogu podesiti ovu vrstu konekcije."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Izaberite mrežni interface"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Molimo izaberite koji mrežni adapter želite koristiti za spajanje na Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nije pronađena mrežna kartica"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Podešavam mrežu"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Molimo unesite naziv vašeg ra�unara ako ga znate.\n"
-"Neki DHCP serveri traže hostname kako bi radili.\n"
-"Naziv vašeg ra�unara bi trebao biti puno-kvalifikovani naziv,\n"
-"kao Å¡to je ``mojcomp.mojlab.mojafirma.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Host name"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Čarobnjak za podešavanje mreže"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Vanjski ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interna ISDN kartica"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Koje je vrste vaša ISDN konekcija?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Koju ISDN konfiguraciju želite?\n"
-"\n"
-"* Stara konfiguracija koristi isdn4net. On sadrži moćne alate,\n"
-"  ali ga je teško podesiti i nije standardiziran.\n"
-"\n"
-"* Novu konfiguraciju je lakše razumjeti, standardnija je,\n"
-"  ali ima manje alata.\n"
-"\n"
-"Preporu�ujemo light konfiguraciju.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nova konfiguracija (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Stara konfiguracija (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "Podešavanje ISDNa"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Izaberite vašeg providera.\n"
-" Ako nije na listi, izaberite Nije na listi"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "Evropski protokol"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "Evropski protokol (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "Protokol za ostatak svijeta"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol za ostatak svijeta \n"
-" bez D-kanala (iznajmljene linije)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Koji protokol želite koristiti?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Koju vrstu kartice imate?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Ne znam"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Ako imate ISA karticu, vrijednosti na idućem ekranu bi trebale biti "
-"ispravne.\n"
-"\n"
-"Ako imate PCMCIA karticu, moraćete znati IRQ i IO vaše kartice.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Prekid"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Nastavak"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Koja je vaša ISDN kartica ?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Otkrio sam neku ISDN PCI karticu, ali ne znam tip. Molimo izaberite neku PCI "
-"karticu na idućem ekranu."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nije pronađena nijedna ISDN PCI kartica. Molimo izaberite jednu na idućem "
-"ekranu."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Molimo izaberite na koji serijski port je naka�en vaš modem."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Opcije dialupa"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Naziv konekcije"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Broj telefona"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Skripta"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Terminal"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Ime domena"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Prvi DNS server (opcionalno)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Drugi DNS server (opcionalno)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Možete se diskonektovati ili prekonfigurisati vašu konekciju."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Možete prekonfigurisati vašu konekciju."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Trenutno ste spojeni na Internet."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Možete se spojiti na Internet ili prekonfigurisati vašu konekciju."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Trenutno niste konektovani na Internet."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Spoji se na Internet"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Odspoji se sa Interneta"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Podesi mrežnu konekciju (LAN ili Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Internet konekcija & podešavanje"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Sada ćemo podesiti konekciju %s."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Sada ćemo podesiti konekciju %s.\n"
-"\n"
-"\n"
-"Pritisnite OK za nastavak."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Podešavanje mreže"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Pošto radite mrežnu instalaciju, vaša mreža je već podešena.\n"
-"Kliknite na Ok da zadržite tu konfiguraciju ili Odustani za podešavanje vaše "
-"Internet & Mrežne konekcije.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Dobro došli u Čarobnjak za podešavanje mreže\n"
-"\n"
-"Sada ćemo podesiti vašu internet/mrežnu konekciju.\n"
-"Ako ne želite da koristite automatsko prepoznavanje, isklju�ite opciju.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Izaberite profil za podešavanje"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Koristi auto prepoznavanje"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Prepoznajem uređaje..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Normalna modemska konekcija"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "detektovan na portu %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN konekcija"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "detektovan %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ADSL konekcija"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "detektovan na interfejsu %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Kablovska konekcija"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "otkrivena kablovska konekcija"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "LAN konekcija"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "prepoznata ethernet kartica(e)"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Izaberite konekciju koju želite podesiti"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Podesili ste nekoliko na�ina za konekciju na Internet.\n"
-"Izaberite jedan od njih koji ćete koristiti.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Internet konekcija"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Da li želite pokrenuti konekciju prilikom boota?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Podešavanje mreže"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr "Potrebno je restartovati mrežu"
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Došlo je do problema prilikom restartovanja mreže:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Čestitamo, podešavanje mreže i interneta je završeno.\n"
-"\n"
-"Sada će ova konfiguracija biti primjenjena na vaš sistem.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Nakon što je to gotovo, preporu�ujemo da restartujete vaš X\n"
-"okoliš kako bi se izbjegao problem sa promjenom naziva mašine."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"UPOZORENJE: Ovaj uređaj je prethodno podešen za konekciju na Internet.\n"
-"Samo prihvatite kako bi ovaj uređaj ostao podešen.\n"
-"Izmjena polja ispod će prepisati ovu konfiguraciju."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Molimo unesite IP konfiguraciju za ovu mašinu.\n"
-"Svaka stavka bi trebala bitii unesena kao IP adresa u decimalnoj notaciji\n"
-"razdvojenoj ta�kama (npr. 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Podešavam mrežni uređaj %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (drajver %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP adresa"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Automatska IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa treba biti u formatu 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Molimo unesite naziv vašeg ra�unara ako ga znate.\n"
-"Naziv vašeg ra�unara bi trebao biti puno-kvalifikovani naziv,\n"
-"kao Å¡to je ``mojcomp.mojlab.mojafirma.com''.\n"
-"Možete također unijeti IP adresu gateway-a ako ga imate"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS server"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Gateway uređaj"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Konfiguracija proxija"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr "Otkrij id mrežne karte (korisno za laptope)"
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Proxy treba biti http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Proxy treba biti ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Internet konfiguracija"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Da li se želite pokušati spojiti na Internet sada?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Probavam vašu konekciju..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Sistem je sada spojen na Internet."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Iz sigurnosnih razloga, sada će biti odspojen."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Izgleda da sistem nije spojen na Internet.\n"
-"Probajte promjeniti postavke vaše konekcije."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Podešavanje konekcije"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Molimo ispunite ili provjerite polje ispod"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ kartice"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Memorija kartice (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "IO kartice"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "IO_0 kartice"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "IO_1 kartice"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Vaš li�ni broj telefona"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Naziv provajdera (npr. provajder.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Broj telefona provajdera"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "Provider dns 1 (opcionalno)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "Provider dns 2 (opcionalno)"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "Izaberite vašu državu"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Na�in biranja broja"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Brzina konekcije"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "Timeout konekcije (u sek.)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Login naloga (korisni�ko ime)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Å ifra naloga"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Extended particije nisu podržane na ovoj platformi"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Imate rupu u vašoj tabeli particija li je ja ne mogu upotrijebiti.\n"
-"Jedino rješenje je da pomjerite vaše primarne particija kako bi rupa bila "
-"pored extended particija"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Povratak iz datoteke %s nije uspio: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Loša backup datoteka"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Greška u pisanju datoteke: %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Nešto loše se dešava na vašem disku. \n"
-"Test integriteta podataka nije uspio. \n"
-"To zna�i će da pisanje bilo �eka na disk rezultirati smećem"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "obavezno"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "važno"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "vrlo fino"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "fino"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "možda"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Lokalni štampa�"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Udaljeni štampa�"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "Štampa� na udaljenom CUPS serveru"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "Štampa� na udaljenom lpd serveru"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Mrežni štampa� (socket)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Štampa� na SMB/Windows 95/98/NT serveru"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "Štampa� na NetWare serveru"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "Unesite URI uređaja štampa�a"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "Spoji zadatak na komandu"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "Nepoznat model"
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr "Sirovo Å¡tampanje (Bez drajvera)"
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "(na ovoj mašini)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Izaberi konekciju štampa�a"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kako je štampa� povezan na ra�unar?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"Ovdje ne morate podešavati štampa�e na udaljenim CUPS serverima;\n"
-"ovi štampa�i će biti automatski prepoznati. Molimo u ovom slu�aju\n"
-"izaberite \"Štampa� na udaljenom CUPS serveru\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Nijedan"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-msgid "Choose a default printer!"
-msgstr "Izaberite default štampa�!"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-"Sa udaljenim CUPS serverom, ne morate podešavati nijedan\n"
-"štampa� ovdje; CUPS serveri obavještavaju vašu mašinu automatski\n"
-"o svojim štampa�ima. Svi štampa�i koji su trenutno poznati vašoj\n"
-"mašini su izlistani u polju \"Podrazumjevani štampa�\". Izaberite "
-"podrazumjevani\n"
-"štampa� za vašu mašinu ovdje i kliknite na dugme \"Primjeni/Ponovo\n"
-"pro�itaj štampa�e\". Kliknite na isto dugme za osvježavanje liste (može\n"
-"trajati do 30 sekundi nakon pokretanja CUPSa dok svi udaljeni štampa�i\n"
-"ne postanu vidljivi).\n"
-"Kada je vaš CUPS server u razli�itoj mreži, morate dati IP adresu CUPS\n"
-"servera i opcionalno broj porta kako bi se dobavile informacije o "
-"štampa�ima\n"
-"sa servera, ina�e ostavite ova polja praznim."
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Zatvori"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "Primjeni/Ponovo pro�itaj štampa�e"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresa treba biti u formatu 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "Broj porta treba biti cijeli broj!"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "Podrazumjevani štampa�"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "IP CUPS servera"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr "Automatska konfiguracija CUPSa"
-
-#: ../../printerdrake.pm_.c:217
-msgid "Detecting devices ..."
-msgstr "Prepoznajem uređaje ..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Testiraj portove"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Štampa�, model \"%s\", je pronađen na"
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Lokalni uređaj štampa�a"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Na koji uređaj je vaš štampa� priklju�en \n"
-"(/dev/lp0 je ekvivalentno LPT1:)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Uređaj štampa�a"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "Ime datoteke/uređaja nedostaje!"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-msgid "Reading printer database ..."
-msgstr "Čitam bazu podataka o štampa�ima ..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Opcije udaljenog lpd štampa�a"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Da biste udaljeni lpd štampa�, morate dati ime ra�unara za\n"
-"printer server i ime štampa�a na tom serveru."
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "Ime udaljenog ra�unara"
-
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "Ime udaljenog štampa�a"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "Ime udaljenog ra�unara nedostaje!"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "Ime udaljenog štampa�a nedostaje!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcije SMB (Windows 9x/NT) štampa�a"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Da biste štampali na SMB štampa�, morate dati\n"
-"ime SMB ra�unara (Pažnja! Ono može biti razli�ito od\n"
-"TCP/IP imena!) i eventualno IP adresu print servera, kao i\n"
-"share naziv štampa�a kojem želite pristupiti i korisni�ko ime,\n"
-"Å¡ifru i informacije o radnoj grupi."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "SMB server ime"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "SMB server IP"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Share naziv"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Radna grupa"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Treba biti dato ili ime servera ili IP adresa servera!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "Naziv samba share-a nedostaje!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "Opcije NetWare štampa�a"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Da biste štampali na NetWare štampa�, trebate dati\n"
-"naziv NetWare print servera (Pažnja! Ono može biti razli�ito od\n"
-"njegovog TCP/IP imena!) kao i naziv reda za štampu na štampa�u\n"
-"kojem želite pristupiti i eventualno korisni�ko ime i šifru."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Printer Server"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Naziv reda za Å¡tampu"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "NCP naziv servera nedostaje!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "NCP naziv reda nedostaje!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Opcije socket štampa�a"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Da biste štampali na socket štampa�, morate dati\n"
-"hostname štampa�a i opcionalno broj porta.\n"
-"Na HP JetDirect serverima broj porta je obi�no 9100,\n"
-"na ostalim serverima on može varirati. Pogledajte\n"
-"priru�nik vašeg hardware-a."
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "Hostname štampa�a"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "Hostname štampa�a nedostaje!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "URI uređaja štampa�a"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Možete dati direktno URI za pristup štampa�u. URI mora zadovoljavati ili "
-"CUPS ili Foomatic specifikacije. Obratite pažnju da nisu svi tipovi URIja "
-"podržani od svih spoolera."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "Trebate unijeti ispravan URI!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Svakom štampa�u treba dati ime (npr. lp).\n"
-"Polja Opis i Lokacija nije potrebno popuniti.\n"
-"Oni su komentari za korisnike."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Naziv štampa�a"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Opis"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Lokacija"
-
-#: ../../printerdrake.pm_.c:701
-msgid "Preparing printer database ..."
-msgstr "Pripremam bazu podataka o štampa�ima..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "Izbor modela štampa�a"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "Koji model štampa�a imate?"
-
-#: ../../printerdrake.pm_.c:866
-msgid "OKI winprinter configuration"
-msgstr "Podešavanje OKI winprinter-a"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-"Sada podešavate OK laserski winprinter. Ovi štampa�i\n"
-"koriste jedan poseban komunikacijski protokol i stoga\n"
-"rade samo kada su spojeni na prvom paralelnom portu.\n"
-"Ako je vaš štampa� spojen na neki drugi port ili na print\n"
-"server molimo spojite štampa� na prvi paralelni port prije\n"
-"nego što odštampate testnu stranicu. Ina�e štampa� neće\n"
-"raditi. Drajver će ignorisati vaše podešenje tipa konekcije."
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-msgid "Lexmark inkjet configuration"
-msgstr "Podešavanje Lexmark inkjet-a"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-"Inkjet drajveri za štampu koje obezbjeđuje Lexmark podržavaju\n"
-"samo lokalne štampa�e, a ne i štampa�e na udaljenim ra�unarima\n"
-"ili print serverima. Molimo spojite vaš štampa� na lokalni port ili\n"
-"ga podesite na mašini na koju je spojen."
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-"Da biste mogli štampati sa vašim Lexmark inkjetom na\n"
-"ovoj konfiguraciji, potrebni su vam inkjet drajveri za Å¡tampu\n"
-"koje obezbjeđuje Lexmark (http://www.lexmark.com/). Idite\n"
-"na US stranicu i kliknite na dugme \"Drivers\". Zatim izaberite\n"
-"vaš model a zatim \"Linux\" kao operativni sistem. Drajveri\n"
-"dolaze u vidu RPM paketa ili shell skripte sa interaktivnom\n"
-"grafi�kom instalacijom. Ne morate obaviti ovu konfiguraciju\n"
-"na grafi�kom interfejsu. Odustanite odmah nakon licencnog\n"
-"ugovora. Zatim odštampaje stranice za poravnavanje glava\n"
-"sa \"lexmarkmaintain\" i podesite opcije poravnanja glave\n"
-"pomoću ovog programa."
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"Podrazumjevane opcije štampa�a\n"
-"Trebate provjeriti da su veli�ina papira i tip tinte\n"
-"(ako je dostupno) ispravno podešeni. Primjetite\n"
-"da za voma veliku kvalitetu štampa može postati\n"
-"znatno sporija."
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opcija %s mora biti cijeli broj!"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opcija %s mora biti broj!"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Opcija %s izvan raspona!"
-
-#: ../../printerdrake.pm_.c:1136
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Da li želite da podesite ovaj štampa� (\"%s\")\n"
-"kao podrazumjevani štampa�?"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "Testna stranica"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"Molimo izaberite testne stranice koje ćete štampati.\n"
-"Pažnja: foto testna stranica može tražiti dosta vremena za štampu\n"
-"a na laserskim štampa�ima sa malo memorije možda neće nikad ni\n"
-"izaći. U većini slu�ajeva dovoljno je odštampati standardnu testnu stranicu."
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "Nijedna testna strana"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "Å tampaj"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "Standardna testna strana"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr "Alternativna testna strana (Letter)"
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr "Alternativna testna strana (A4)"
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "Foto testna strana"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Å tampam testnu stranicu..."
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testna stranica je poslana štampa�u.\n"
-"Može potrajati određeno vrijeme dok štampa� krene.\n"
-"Status Å¡tampanja:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testna stranica je poslana štampa�u.\n"
-"Može potrajati određeno vrijeme dok štampa� krene.\n"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "Da li je radilo ispravno?"
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-msgid "Raw printer"
-msgstr "Sirovi štampa�"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Za štampanje datoteke sa komandne linije (terminalski prozor) možete "
-"koristiti ili komandu \"%s <datoteka>\" ili grafi�ki alat za štampu: \"xpp "
-"<datoteka>\" ili \"qtcups <datoteka>\". Grafi�ki alati vam omogućuju da "
-"jednostavno odaberete štampa� i izmjenite podešenja opcija.\n"
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ove komande možete također koristiti u polju \"Komanda za štampu\" u "
-"dijalozima za Å¡tampu mnogih aplikacija, ali ovdje ne morate navesti ime "
-"datoteke jer tu datoteku obezbjeđuje sama aplikacija.\n"
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Komanda \"%s\" također omogućava izmjenu opcija za pojedina�ni zadatak "
-"štampe. Jednostavno dodajte željena podešenja na komandnu liniju, npr. \"%s "
-"<datoteka>\". "
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-"Za listu opcija koje su dostupne za trenutni štampa� ili pro�itajte listu "
-"koja je data ispod ili kliknite na dugme \"Lista opcija za Å¡tampu\".\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Za Å¡tampanje datoteke sa komandne linije (terminalski prozor) koristite "
-"komandu \"%s <datoteka>\".\n"
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ovu komandu također možete koristiti u polju \"Komanda za štampu\" u "
-"dijalozima za Å¡tampu mnogih aplikacija. Ovdje nije potrebno navesti naziv "
-"datoteke jer tudatoteku obezbjeđuje sama aplikacija.\n"
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-"Za listu opcija koje su dostupne za trenutni štampa� kliknite na dugme "
-"\"Lista opcija za Å¡tampu\".\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Za Å¡tampanje datoteke sa komandne linije (terminalski prozor) koristite "
-"komandu \"%s <datoteka>\" ili \"%s <datoteka>\".\n"
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Možete također koristiti grafi�ki interfejs \"xpdq\" za podešavanje opcija i "
-"upravljanje zadacima Å¡tampe.\n"
-"Ako koristite KDE okruženje radne površine imate \"dugme za paniku\". To je "
-"ikona na radnoj površini �iji je naziv \"ZAUSTAVI štampa�!\", koja "
-"zaustavlja sve zadatke Å¡tampe odmah kada kliknete na nju. Ovo je korisno "
-"npr. u slu�aju zaglavljivanja papira.\n"
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Komande \"%s\" i \"%s\" također omogućavaju izmjenu opcija za pojedina�ni "
-"zadatak štampe. Jednostavno dodajte željena podešenja na komandnu liniju, "
-"npr. \"%s <datoteka>\".\n"
-
-#: ../../printerdrake.pm_.c:1292
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Štampam na štampa� \"%s\""
-
-#: ../../printerdrake.pm_.c:1294
-msgid "Print option list"
-msgstr "Lista opcija za Å¡tampu"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "Čitam podatke o štampa�u..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "Premještanje konfiguracije štamap�a"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-"Možete kopirati konfiguraciju štampa�a koju ste napravili \n"
-"za spooler %s u %s, vaš trenutni spooler. Svi podaci o\n"
-"konfiguraciji (naziv štampa�a, opis, lokacija, tip konekcije\n"
-"kao i podrazumjevane opcije) će biti preuzeti, ali zadaci\n"
-"štampe neće biti preba�eni.\n"
-"Svi redovi ne mogu biti preba�eni zbog sljedećih razloga:\n"
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-"CUPS ne podržava štampa�e na Novell serverima ili štampa�e\n"
-"koji Å¡alju podatke u komandama slobodnog oblika.\n"
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-"PDQ podržava samo lokalne štampa�e, udaljene LPD štampa�e\n"
-"i Socket/TCP štampa�e.\n"
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD i LPRng ne podržavaju IPP štampa�e.\n"
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-"Pored toga, redovi koji nisu kreirani ovim programom ili\n"
-"\"foomatic-configure\" ne mogu biti premješteni."
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-"\n"
-"Također štampa�i konfigurisani sa PPD datotekama koje\n"
-"su osigurali njihovi proizvođa�i ili sa vlastitim CUPS drajverima\n"
-"ne mogu biti preba�eni."
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Ozna�ite štampa�e koje ćete prebacivati i kliknite na \n"
-"\"Prebaci\"."
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "Nemoj prebacivati štampa�e"
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "Prebaci"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Štampa� pod imenom \"%s\" već postoji pod %s: \n"
-"Kliknite na \"Prebaci\" da to prepišete.\n"
-"Možete također unijeti novo ime ili presko�iti ovaj štampa�."
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Naziv štampa�a bi se trebao sastojati od slova, brojeva i donje linije"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Štampa� \"%s\" već postoji,\n"
-"da li sigurno želite prepisati ovu konfiguraciju?"
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "Novo ime štampa�a"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Prebacujem %s ..."
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-"Prebacili ste vaš bivši podrazumjevani štampa� (\"%s\"),\n"
-"Da li će to također biti podrazumjevani štampa� pod\n"
-"novim sistemom Å¡tampe %s?"
-
-#: ../../printerdrake.pm_.c:1423
-msgid "Refreshing printer data ..."
-msgstr "Osvježavam podatke o štampa�u..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr "Podešavanje udaljenog štampa�a"
-
-#: ../../printerdrake.pm_.c:1432
-msgid "Starting network ..."
-msgstr "Pokrećem mrežu..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-msgid "Configure the network now"
-msgstr "Sada podesite mrežu"
-
-#: ../../printerdrake.pm_.c:1455
-msgid "Network functionality not configured"
-msgstr "Mrežna funkcionalnost nije podešena"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-"Sada ćete podesiti udaljeni štampa�. Ovo zahtjeva aktivan\n"
-"pristup mreži, ali vaša mreža još uvijek nije podešena. Ako\n"
-"želite nastaviti bez podešavanja mreže, nećete moći koristiti\n"
-"štampa� koji sada podešavate. Kako želite da nastavimo?"
-
-#: ../../printerdrake.pm_.c:1463
-msgid "Go on without configuring the network"
-msgstr "Nastavi bez podešavanja mreže"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-"Podešavanje mreže koje je napravljeno tokom instalacije\n"
-"sada ne može biti pokrenuto. Molim provjerite da li će mreža\n"
-"postati dostupna nakon bootanja sistema i popravite podešenja\n"
-"koristeći Mandrake Kontrolni centar, sekcija \"Mreža i\n"
-"Internet\"/\"Konekcija\", a zatim podesite štampa�, ponovo koristeći\n"
-"Mandrake Kontrolni centar, sekcija \"Hardver\"/\"Štampa�\""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-"Mrežni pristup nije aktivan i nije mogao biti pokrenut.\n"
-"Molimo provjerite vašu konfiguraciju i vaš hardware.\n"
-"Onda ponovo pokušajte podesiti udaljeni štampa�."
-
-#: ../../printerdrake.pm_.c:1516
-msgid "Restarting printing system ..."
-msgstr "Restartujem sistem za Å¡tampu ..."
-
-#: ../../printerdrake.pm_.c:1548
-msgid "high"
-msgstr "visok"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "paranoid"
-msgstr "paranoi�an"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instaliram sistem za Å¡tampu na sigurnosnom nivou: %s"
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-"Sada ćete instalirati sistem za štampu %s na sistemu\n"
-"koji je na sigurnosnom nivou: %s.\n"
-"\n"
-"Ovaj sistem za štampu pokreće demon (pozadinski proces)\n"
-"koji �eka zadatke štampe i rješava ih. Ovom demon takođe mogu\n"
-"pristupiti druge mašine putem mreže, tako da je to moguća\n"
-"ta�ka napada. Stoga se tek rijetki od odabranih demona pokreću\n"
-"na ovom sigurnosnom nivou.\n"
-"\n"
-"Da li zaista želite podesiti štampanje na ovoj mašini?"
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Starting the printing system at boot time"
-msgstr "Pokrećem sistem za štampu tokom boota"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-"Sistem za štampu (%s) se neće pokrenuti automatski\n"
-"prilikom boota mašine.\n"
-"\n"
-"Moguće je da je automatsko pokretanje isklju�eno prilikom\n"
-"promjene na viši nivo sigurnosni, pošto je sistem za štampu\n"
-"moguća ta�ka napada.\n"
-"\n"
-"Da li želite da ponovo uklju�ite automatsko pokretanje sistema\n"
-"za Å¡tampu?"
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "Provjeravam instalirani software..."
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "Uklanjam LPRng..."
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "Uklanjam LPD..."
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Izaberite spooler štampa�a"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Koji sistem štampanja (spooler) želite koristiti?"
-
-#: ../../printerdrake.pm_.c:1759
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Podešavam štampa� \"%s\"..."
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Opcije štampa�a"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr "Pripremam PrinterDrake..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "Da li želite podesiti štampanje?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr "Sistem Å¡tampe: "
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-"Sljedeli štampa�i su podešeni.\n"
-"Kliknite na neki od njih za izmjenu\n"
-"ili informacije o njemu, ili kliknite na\n"
-"\"Dodaj štampa�\" da biste dodali novi."
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Normalni mod"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Default)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Štampa�(i) na udaljenom CUPS serveru"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-msgid "Printer(s) on remote server(s)"
-msgstr "Štampa�(i) na udaljenom serveru"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Dodaj štampa�"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-msgid "Do you want to configure another printer?"
-msgstr "Želite li podesiti još jedan štampa�?"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "Izmjeni konfiguraciju štampa�a"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Štampa� %s: %s %s\n"
-"Šta želite da izmjenite na ovom štampa�u?"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "Uradi!"
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "Tip konekcije štampa�a"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "Naziv štampa�a, opis, lokacija"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "Proizvođa� štampa�a, model, drajver"
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "Proizvođa� štampa�a, model"
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr "Podesi štampa� kao podrazumjevani"
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "Å tampaj testnu stranicu"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr "Saznaj kako štampati ovim štampa�em"
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "Ukloni štampa�"
-
-#: ../../printerdrake.pm_.c:2071
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Uklanjam stari štampa� \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Štampa� \"%s\" je sada podešen kao podrazumjevani štampa�."
-
-#: ../../printerdrake.pm_.c:2103
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Da li želite da uklonite štampa� \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2105
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Uklanjam štampa� \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Podešavanje proxija"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Dobro došli u alat za podešavanje proxija.\n"
-"qn Ovdje ćete biti u prilici da podesite vaše http i ftp proxije\n"
-"sa ili bez logina i Å¡ifre\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Molimo popunite informacije o http proxiju\n"
-"Ostavite polja praznim ako ne želite http proxy"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url treba po�injati sa 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Port treba biti broj"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Molimo popunite informacije o ftp proxiju\n"
-"Ostavite polja praznim ako ne želite ftp proxy"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url treba po�injati sa 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Molimo unesite login i Å¡ifru za proxy, ako su potrebni.\n"
-"Ostavite polja praznim ako ne želite login/šifru"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Å¡ifra"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "ponovo unesite Å¡ifru"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Šifre se ne poklapaju. Pokušajte opet!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ne mogu dodati particiju na _formatiran_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ne mogu pisati datoteku %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid nije uspio"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid nije uspio (možda nedostaju raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nema dovoljno particija za RAID nivo %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Pokreni ALSA zvu�ni sistem (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron periodi�ni pokreta� komandi."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd se koristi za nadgledanje statusa baterija i logovanje preko\n"
-"sysloga. Također se može koristiti za gašenje mašine kada su baterije "
-"potrošene."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Pokreće komande zakazane putem at komande u vrijeme koje je zadato\n"
-"prilikom pokretanja at-a, te pokreće pozadinske komande kada je nizak "
-"prosje�ni nivo opterećenja."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je standardan UNIX program koji pokreće programe koje zada korisnik\n"
-"u periodi�nim terminima. vixie cron dodaje veći broj mogućnosti osnovnom\n"
-"UNIX cronu, uklju�ujući bolju sigurnost i moćnije opcije za podešavanje."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM dodaje podršku za miša tekst-baziranim aplikacijama kao što je\n"
-"Midnight Commander. On također omogućuje konzolne isjeci/zaljepi operacije\n"
-"pomoću miša i uklju�uje podršku za pop-up menije na konzoli."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake pokreće probavanje hardware-a i opcionalno konfiguriše\n"
-"novi/izmjenjeni hardware."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache je World Wide Web server.  Koristi se za posluživanje HTML\n"
-"datoteka i CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Demon za nadgledanje Interneta (obi�no nazvan inetd) pokreće\n"
-"raznolike druge Internet servise po potrebi. Odgovoran je za pokretanje\n"
-"raznih servisa, kao što su telnet, ftp, rsh i rlogin. Isklju�ivanje inetd-a\n"
-"isklju�uje sve servise za koje je on nadležan."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Pokrenite filtriranje paketa za Linux kernel seriju 2.2 kako\n"
-"biste postavili firewall i zaštitili vašu mašinu od mrežnih napada."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ovaj paket u�itava izabranu mapu tastature kao što je podešeno u\n"
-"/etc/sysconfig/keyboarc.  Ovo može biti izabrano korištenjem kbdconfig\n"
-"programa. Možete ovo ostaviti uklju�enim na većini mašina."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatsko regenerisanje kernel zaglavlja u /boot za\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatsko prepoznavanje i podešavanje hardware-a tokom boota."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf će ponekad obaviti raznolike zadatke tokom boota\n"
-"kako bi se održala sistemska konfiguracija."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je demon za Å¡tampu koji je potreban da bi lpr radio ispravno.\n"
-"To je u osnovi server koji dodjeljuje zadatke štampe štampa�u/ima."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtuelni Server, koristi se za izgradnju servera visokih performansi\n"
-"i dostupnosti."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) je Domain Name Server (DNS) koji se koristi za\n"
-"pretvaranje imena ra�unara u IP adrese."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Montira i demontira sve Network File System (NFS), SMB (Lan\n"
-"Manager/Windows) i NCP (NetWare) ta�ke montiranja."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivira/deaktivira sve mrežne interfejse koji su konfigurisani\n"
-"za pokretanje tokom boota."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreža.\n"
-"Ovaj servis omogućuje funkcionalnost NFS servera, koji je podešen putem\n"
-"/etc/exports datoteke."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreža.\n"
-"Ovaj servis omogućuje NFS funkcionalnost zaklju�avanja datoteka."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatski uklju�uje numlock bravu tipaka pod konzolom i\n"
-"XFree tokom boota."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podrška za OK 4w i kompatibilne windows štampa�e"
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA podrška je obi�no za podržavanje stvari kao što je\n"
-"ethernet i modemi u laptopima.  Neće se pokrenuti dok se ne\n"
-"konfiguriše tako da je sigurno imati ga instaliranog na mašinama\n"
-" kojima nije potreban."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper upravlja RPC konekcijama, koje koriste protokoli kao Å¡to\n"
-"su NFS i NIS. Portmap server mora raditi na mašinama koje služe kao\n"
-"serveri za protokole koji koriste RPC mehanizam."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix je Mail Transport Agent, tj. program koji šalje poštu sa\n"
-"jedne mašine na drugu."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Spašava i vraća sistemski raspon entropije za veću kvalitetu\n"
-"generisanja slu�ajnih brojeva."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Dodjeljuje sirove uređaje blokovskim urećajima (kao što su\n"
-"particije hard diska) za upotrebu aplikacijama kao Å¡to je Oracle"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed demon omogućuje da se automatska IP tabela rutiranja podešava\n"
-"preko RIP protokola. Mada se RIP �esto koristi na malim mrežama, "
-"kompleksniji\n"
-"protokoli rutiranja su potrebni za složene mreže."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokol omogućava korisnicima na mreži da dobave\n"
-"mjeru performansi za svaku mašinu na toj mreži"
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokol omogućava korisnicima na mreži da identificiraju\n"
-"ko je prijavljen na ostalim mašinama."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokol omogućava udaljenim korisnicima da dobiju listu svih\n"
-"korisnika prijavljenih na mašinu na kojoj radi rwho demon (sli�no fingeru)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Pokreće zvu�ni sistem na vašoj mašini"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog je pogodnost pomoću koje mnogi demoni zapisuju poruke\n"
-"u razne sistemske dnevnike.  Dobra ideja je uvijek imati pokrenuti syslog."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Pokreće drajvere za vaše usb uređaje."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Pokreće X Font Server (ovo je nužno da bi XFree radio)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Izaberite koji servisi se trebaju pokretati automatski prilikom boota"
-
-#: ../../services.pm_.c:126
-msgid "Printing"
-msgstr "Å tampa"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr "Dijeljenje datoteka"
-
-#: ../../services.pm_.c:132
-msgid "System"
-msgstr "Sistem"
-
-#: ../../services.pm_.c:137
-msgid "Remote Administration"
-msgstr "Udaljena administracija"
-
-#: ../../services.pm_.c:145
-msgid "Database Server"
-msgstr "Server baze podataka"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servisi: %d aktiviran za %d registrovan"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Servisi"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "aktivan"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "zaustavljen"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servisi i demoni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Nema dodatnih informacija\n"
-"o ovom servisu, izvinite."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Prilikom boota"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Instaliram pakete..."
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ne mogu �itati vašu tabelu particija, previše je oštećena za mene :(\n"
-"Pokušaću izbrisati loše particije"
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "Greška!"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ne mogu pronaći potrebnu image datoteku '%s'"
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "Podešavanje auto instalacije"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Sada ćete podesiti Auto Instalacijsku disketu. Ova opcija je pomalo opasna i "
-"mora biti korištena uz pažnju.\n"
-"\n"
-"Sa ovom opcijom bićete u mogućnosti da ponovite instalaciju koju ste obavili "
-"na ovom ra�unaru, pri ćemu ćete biti interaktivno upitani za neke korake, "
-"kako biste promjenili njihove vrijednosti.\n"
-"\n"
-"Za maksimalnu sigurnost, particioniranje i formatiranje nikad neće biti "
-"obavljeno automatski, bez obzira Å¡ta izaberete tokom instalacije na ovaj "
-"ra�unar.\n"
-"\n"
-"Da li želite nastaviti?"
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "Automatska konfiguracija koraka"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Molimo izaberite za svaki korak da li ćete ga ponoviti kao i u vašoj "
-"instalaciji ili će se obaviti ru�no"
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "ÄŒestitamo!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketa je uspješno napravljena.\n"
-"Sada možete ponoviti vašu instalaciju."
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Dijeljenje Internet konekcije"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Dijeljenje Internet konekcije je trenutno aktivno"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Dijeljenje Internet konekcije je već podešeno. Trenutno je\n"
-"aktivno.\n"
-"\n"
-"Šta želite uraditi?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "isklju�i"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "otkaži"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "rekonfiguriši"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Isklju�ujem servere..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Dijeljenje Internet konekcije je sada isklju�eno."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Dijeljenje Internet konekcije je trenutno neaktivno"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Dijeljenje Internet konekcije je već podešeno. Trenutno je\n"
-"neaktivno.\n"
-"\n"
-"Šta želite uraditi?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "uklju�i"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Uklju�ujem servere..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Dijeljenje Internet konekcije je sada uklju�eno."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Sada ćete konfigurisati vaš ra�unar za dijeljenje Internet konekcije.\n"
-"Sa ovom opcijom, ostali ra�unari na vašoj lokalnoj mreži će moći koristiti "
-"Internet konekciju ovog ra�unara. \n"
-"\n"
-"Napomena: potreban vam je poseban Mrežni adapter da biste podesili Lokalnu "
-"mrežu (LAN)."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfejs %s (koristeći modul %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Interfejs %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Nema mrežnog adaptera na vašem sistemu!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Na vašem sistemu nije pronađen nijedan ethernet mrežni adapter. Molimo "
-"pokrenite alat za podešavanje hardware-a."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Mrežni interface"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Trenutno je samo jedan mrežni adapter podešen na vašem sistemu:\n"
-"\n"
-"%s\n"
-"\n"
-"Sada ću podesiti vašu Lokalnu mrežu sa ovim adapterom."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Molimo izaberite koji mrežni adapter će biti spojen na vašu Lokalnu mrežu."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr "Upozorenje, mrežni adapter je već podešen. Sada ću ga rekonfigurisati."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potencijalan konflikt LAN adresa pronađen u trenutnoj konfiguraciji %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Otkrivena konfiguracija firewalla!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Upozorenje! Pronađena je postojeća konfiguracija firewalla. Možda će biti "
-"potrebno neko ru�no podešavanje nakon instalacije."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Podešavam..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Podešavam skripte, instaliram software, pokrećem servere..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemi tokom instaliranja paketa %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Sve je konfigurisano.\n"
-"Sada možete dijeliti Internet konekciju sa ostalim ra�unarima na vašoj "
-"lokalnoj mreži, koristeći automatsku mrežnu konfiguraciju (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Podešavanje je već završeno, ali je trenutno isklju�eno."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Podešavanje je već završeno i trenutno je uklju�eno."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Dijeljenje Internet konekcije nije nikad podešeno."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Podešavanje dijeljenja Internet konekcije"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Dobrodošli u alat za Dijeljenje Internet konekcije!\n"
-"\n"
-"%s\n"
-"\n"
-"Kliknite na Podesi da pokrenete �arobnjak."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Podešavanje mreže (%d adaptera)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profil:"
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Briši profil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Profil za brisanje:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Novi profil..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Naziv profila koji će biti kreiran (novi profil je kreiran kao kopija "
-"postojećeg) :"
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Hostname: "
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Pristup Internetu"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Tip:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Interfejs:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Konektovan"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Nije konektovan"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Konektuj se..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Prekini konekciju..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Pokrećem vašu konekciju..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Zatvaram vašu konekciju..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Konekcija nije zatvorena.\n"
-"Probajte to u�initi ru�no pokrećući\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"u rootu."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Sistem je sada diskonektovan."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Podesi Internet pristup..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "Podešavanje LANa"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Drajver"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Interfejs"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Podesi Lokalnu mrežu..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr "Kliknite ovdje za pokretanje �arobnjaka ->"
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Primjeni"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Molimo sa�ekajte... Primjenjujem konfiguraciju"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nemate nijedan podešen interfejs.\n"
-"Podesite ih prvo klikajući na 'Podesi'"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "Podešavanje LANa"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Boot protokol"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Pokrenut na bootu"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "pokreni sada"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "zaustavi sada"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nemate nijednu Internet konekciju.\n"
-"Napravite jednu klikajući na 'Podesi'"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Podešavanje Internet konekcije"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Podešavanje Internet konekcije"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Tip konekcije: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parametri"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Ethernet kartica"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Dobrodošli u Crackers"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Loš"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoi�an"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ovaj nivo treba koristiti pažljivo. On �ini vaš sistem lakšim za upotrebu,\n"
-"ali vrlo osjetljivim: ne smije biti korišten za mašinu koja je spojena na\n"
-"druge ili na Internet. Nema pristupa Å¡ifrom."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Šifra je sada aktivirana, ali korištenje za mrežni ra�unar još nije "
-"preporu�eno."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Nekoliko unaprijeđenja na ovom sigurnosnom nivou, glavni je da ima\n"
-"više sigurnosnih upozorenja i provjera."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Ovo je standardna sigurnost koja je preporu�ena za ra�unar koji će biti\n"
-"korišten za spajanje na Internet kao klijent. Sada su uklju�ene sigurnosne "
-"provjere."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Sa ovim sigurnosnim nivoom, postaje moguće koristiti ovaj sistem kao "
-"server.\n"
-"Sigurnost je sada dovoljno visoka za upotrebu sistema kao servera koji "
-"prima\n"
-"konekcije sa mnogo klijenata."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Koristimo osobine nivoa 4, ali sada je sistem potpuno zatvoren.\n"
-"Sigurnosne osobine na maksimumu."
-
-#: ../../standalone/draksec_.c:65
-msgid "Security level"
-msgstr "Nivo sigurnosti"
-
-#: ../../standalone/draksec_.c:67
-msgid "Use libsafe for servers"
-msgstr "Koristi libsafe za servere"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Biblioteka koja brani od napada \"buffer overflow\" i \"format string\"."
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Podešavanje nivoa sigurnosti"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrolni centar"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Izaberite alat koji želite koristiti"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "upotreba: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Želite li da BackSpace vrati Delete u konzoli?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Promjenite CD-ROM"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Molimo ubacite Instalacioni CD-ROM u vaš drajv i pritisnite Ok kad ste "
-"spremni.\n"
-"Ako ga nemate, pritisnite Odustani da bi se izbjegao live upgrade."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ne mogu da pokrenem live upgrade !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "nije pronađen serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Emuliraj treće dugme?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Podešavanje firewalla"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Podešavanje firewalla"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Već ste podesili firewall.\n"
-"Kliknite na Podesi kako bi se izmjenio ili uklonio firewall"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Kliknite na Podesi za podešavanje standardnog firewalla"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Izaberite svoj jezik"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Izaberite klasu instalacije"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Prepoznavanje hard diska"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Podešavanje miša"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Izaberite vašu tastaturu"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sigurnost"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Podešavanje datote�nih sistema"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatiranje particija"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Izaberite pakete za instalaciju"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Sistem instalacije"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Dodajte korisnika"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Podešavanje mreže"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Podešavanje servisa"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Napravite boot disketu"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Instalacija bootloadera"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Podešavanje X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Napusti instalaciju"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall podešava�\n"
-"\n"
-"On podešava li�ni firewall za ovu Mandrake Linux mašinu.\n"
-"Za moćnu soluciju posebnog firewalla, molimo pogledajte\n"
-"specijaliziranu MandrakeSecurity Firewall distribuciju."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Sada ćemo vam postaviti pitanja o servisima kojima želite dozvoliti\n"
-"pristup sa Interneta.  Molimo razmislite pažljivo o ovim pitanjima,\n"
-"jer je sigurnost vašeg ra�unara bitna.\n"
-"\n"
-"Molimo vas, ako trenutno ne koristite neki od ovih servisa, isklju�ite\n"
-"ga firewallom.  Možete izmjeniti ove postavke kad god želite ponovnim\n"
-"pokretanjem ove aplikacije!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut web server na ovoj mašini za koji želite da ga\n"
-"cijeli Internet vidi? Ako imate pokrenut webserver kojem ćete pristupati\n"
-"samo sa ove mašine, možete slobodno ovdje odgovoriti NE.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut name server (DNS) na ovoj mašini? Ako niste\n"
-"podesili DNS radi davanja informacija o IP i zoni cijelom Internetu, \n"
-"molimo vas odgovorite ne.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Da li želite da dozvolite ulazne Secure Shell (ssh) konekcije? Ovo\n"
-"je zamjena za telnet koju možete koristiti za prijavu. Ako sada koristite\n"
-"telnet, definitivno trebate preći na ssh. Telnet nije kriptovan, tako\n"
-"da neki napada�i mogu ukrasti vašu šifru ako ga koristite. ssh je\n"
-"kriptovan i ne dozvoljava ovo prisluškivanje."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Da li želite dozvoliti ulazne telnet konekcije?\n"
-"Ovo je užasno nesigurno, kao što je objašnjeno na prethodnom\n"
-"ekranu. Strogo preporu�ujemo da odgovorite Ne ovdje i koristite\n"
-"ssh umjesto telneta.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Da li imate pokrenut FTP server za koji želite da je pristupa�an sa\n"
-"Interneta? Ako da, onda strogo preporu�ujemo da ga koristite samo\n"
-"za anonimne transfere. Bilo koju Å¡ifru koja je poslana putem FTPa\n"
-"mogu ukrasti napada�i, pošto FTP također ne koristi kriptovanje.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut mail server ovdje? Ako Å¡aljete poruke\n"
-"kroz pine, mutt ili neki drugi tekst-bazirani mail klijent, onda\n"
-"vjerovatno imate.  U suprotnom, trebali biste isklju�iti ovo \n"
-"firewallom.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut POP ili IMAP server ovdje? Ovo bi\n"
-"bilo korišteno za smještaj ne-web-baziranih mail naloga\n"
-"za ljude na ovoj mašini.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Čini se da koristite 2.2 kernel.  Ako je vaša mrežna IP\n"
-"automatski podešena putem ra�unara u vašoj kući ili\n"
-"uredu (dinami�ki dodjeljena), moramo ovo dozvoliti.  Da\n"
-"li je ovo slu�aj?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Da li vaš ra�unar sinhronizuje vrijeme sa drugim ra�unarom?\n"
-"Naj�ešće, ovo se koristi u srednje velikim Unix/Linux organizacijama\n"
-"za sinhronizaciju vremena za pravljenje dnevnika i sli�no.  Ako\n"
-"niste dio većeg ureda i niste �uli za ovo, onda vjerovatno\n"
-"ovo nije slu�aj."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Podešavanje završeno.  Možemo li zapisati ove izmjene na disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ne mogu otvoriti %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ne mogu otvoriti %s za pisanje: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Mrežni ra�unar (klijent)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, ssh server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Ured"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome Radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Alati za vaš Palm Pilot ili Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domain Name i Network Information Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Uredski programi: obrada teksta (kword, abiword), tabli�ni alati (kspread, "
-"gnumeric), pdf preglednici itd."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Alati vezani za zvuk: mp3 ili midi playeri, mixeri itd."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knjige i Howto-i na temu Linuxa i Slobodnog Software-a"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE Radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itd."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedija - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Skup alata za mail, news, web, prenos datoteka i chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Baze podataka"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL ili MySQL baza podataka"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Alati za lakše podešavanje ra�unara"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedija - Zvuk"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Korisni programi"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentacija"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Alati za konzolu"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix mail server, Inn news server"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet stanica"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedijalna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Podešavanje"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Druge grafi�ke okoline (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, osnovno grafi�ko okruženje sa izborom pratećih alata"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafi�ko okruženje"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Razvoj"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Alati za pravljenje i prženje CDova"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Uredska radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, itd."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafi�ki programi kao što je Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C i C++ razvojne biblioteke, programi i include datoteke"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Network Computer server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Stanica za igru"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video playeri i editori"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedija - Grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Zabavni programi: arkadne igre, igre za tablu, strategije itd."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Skup alata za �itanje i slanje pošte i news-a (pine, mutt, tin...) i "
-"pregledanje Weba"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arhiviranje, emulatori, nadzor"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Li�ne finansije"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafi�ki okoliš sa skupom korisni�ki orjentisanih aplikacija i alata za "
-"radnu površinu"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klijenti za razne protokole uklju�ujući ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programi za pregled i editovanje zvuka i videa"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Ostale grafi�ke okoline"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editori, ljuske, datote�ni alati, terminali"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programi za upravljanje vašim finansijama, kao što je gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Igre"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Upravljanje li�nim informacijama"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedija - Prženje CDa"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Znanstvena radna stanica"
-
diff --git a/perl-install/share/po/ca.po b/perl-install/share/po/ca.po
deleted file mode 100644
index e92bfa983..000000000
--- a/perl-install/share/po/ca.po
+++ /dev/null
@@ -1,12148 +0,0 @@
-# drakX translation to Catalan
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-# Copyright (c) 1999-2001 Softcatalà
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-04-10 23:29+0200\n"
-"Last-Translator: Softcatalà <traddrake@softcatala.org>\n"
-"Language-Team: Catalan\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Configura tots els capçals independentment"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Utilitza l'extensió Xinerama"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configura només la targeta \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Configuració Multi-head"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"El vostre sistema permet l'ús d'una configuració de múltiples capçals.\n"
-"Què voleu fer?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Targeta gràfica"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Seleccioneu una targeta gràfica"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Escolliu un servidor X"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "Servidor X"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Quina configuració de l'XFree voleu tenir?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"La vostra targeta pot tenir acceleració 3D de maquinari, però només amb "
-"l'Xfree %s.\n"
-"L'XFree %s, que pot tenir un suport millor en 2D, suporta la vostra targeta."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"La vostra targeta pot tenir acceleració 3D de maquinari amb l'Xfree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "Xfree %s amb acceleració 3D de maquinari"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"La vostra targeta pot tenir acceleració 3D de maquinari amb l'Xfree %s,\n"
-"TINGUEU EN COMPTE QUE ES TRACTA D'UN SUPORT EXPERIMENTAL; L'ORDINADOR ES POT "
-"PENJAR."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s amb acceleració 3D de maquinari EXPERIMENTAL"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"La vostra targeta pot tenir acceleració 3D de maquinari, però només amb "
-"l'Xfree %s,\n"
-"TINGUEU EN COMPTE QUE ES TRACTA D'UN SUPORT EXPERIMENTAL; L'ORDINADOR ES POT "
-"PENJAR.\n"
-"L'XFree %s, que pot tenir un suport millor en 2D, suporta la vostra targeta."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "Configuració de l'XFree"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Seleccioneu la mida de memòria de la vostra targeta gràfica"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Escolliu les opcions per al servidor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Escolliu un monitor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Els dos paràmetres més importants son la velocitat de refresc vertical, que\n"
-"és la velocitat a què es refresca tota la pantalla, i el més important, la\n"
-"velocitat de sincronització horitzontal, que és la velocitat a què es\n"
-"visualitzen les línies d'exploració.\n"
-"\n"
-"És MOLT IMPORTANT que no especifiqueu un tipus de monitor amb un abast\n"
-"de sincronització superior a les possibilitats del vostre monitor, perquè\n"
-"el podríeu fer malbé.\n"
-"En cas de dubte, sigueu conservador amb aquest paràmetre."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Velocitat de refresc horitzontal"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Velocitat de refresc vertical"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "El monitor no està configurat"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "La targeta gràfica encara no està configurada"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Encara no s'han escollit les resolucions"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Voleu comprovar la configuració?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Avís: la comprovació d'aquesta targeta gràfica pot penjar-vos l'ordinador"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Comprova la configuració"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"intenteu canviar alguns paràmetres"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "S'ha produït un error:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Sortida en %d segons"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "És aquest el paràmetre corrcte?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "S'ha produït un error, intenteu canviar alguns paràmetres"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Resolució"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Escolliu la resolució i la profunditat de color"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Targeta gràfica: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Servidor xFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Mode expert"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Mostra'ls tots"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Resolucions"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Disposició del teclat: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipus de ratolí: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositiu del ratolí: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Sincronització horitzontal del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Refresc vertical del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Targeta gràfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Targeta gràfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memòria gràfica: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profunditat del color: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolució: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor xFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Controlador de l'xFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "S'està preparant la configuració de l'X-Window"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Què voleu fer?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Canvia el monitor"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Canvia la targeta gràfica"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Canvia les opcions del servidor"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Canvia la resolució"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Mostra la informació"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Torna-ho a comprovar"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Surt"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Voleu conservar els canvis?La configuració actual és:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Si us plau, torneu a entrar a %s per activar els canvis"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Si us plau, sortiu i utilitzeu Ctrl-Alt-Enrere"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X a l'inici"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Puc configurar el vostre ordinador de manera que executi X automàticament "
-"durant l'arrencada.\n"
-"Voleu que X s'iniciï quan torneu a arrencar l'ordinador?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 colors (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32.768 colors (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65.536 colors (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milions de colors (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4.294 milions de colors (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB o més"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA estàndard, 640x480 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatible 8514, 1024x768 a 87 Hz entrellaçada (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz entrellaçada, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA ampliada, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA no entrellaçada, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA d'alta freqüència, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-freqüència que pot fer 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-freqüència que pot fer 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-freqüència que pot fer 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor que pot fer 1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor que pot fer 1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Primer sector de la partició d'arrencada"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Primer sector de la unitat (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "Instal·lació del SILO"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "On voleu instal·lar el carregador d'arrencada?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "Instal·lació del LILO/grub"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO amb menú de text"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO amb menú gràfic"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Arrencada des de DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Opcions principals del carregador d'arrencada"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Carregador d'arrencada a utilitzar"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Instal·lació del carregador d'arrencada"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Dispositiu d'arrencada"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (no funciona en BIOS antics)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Compacte"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "compacte"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Mode de vídeo"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Demora abans d'arrencar la imatge predeterminada"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Contrasenya"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Contrasenya (un altre cop)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Limita les opcions de la línia d'ordres"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "limita"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Buida /tmp en cada arrencada"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Mida exacta de la RAM, si cal (s'han trobat %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Habilita perfils múltiples"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Introduïu la mida de la RAM en Mb"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"L'opció ``Limita les opcions de la línia d'ordres'' no té cap ús sense una "
-"contrasenya"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Si us plau, torneu-ho a intentar"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Les contrasenyes no coincideixen"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Missatge d'inicialització"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Demora de firmware obert"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Temps màxim d'arrencada del nucli"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Voleu habilitar l'arrencada des de CD?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Voleu habilitar l'arrencada des d'OF?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "OS per defecte?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Aquestes són les diferents entrades.\n"
-"Podeu afegir-ne algunes més o canviar-ne les existents."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Afegeix"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Fet"
-
-#: ../../any.pm_.c:217
-#, fuzzy
-msgid "Modify"
-msgstr "Modifica el RAID"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Quin tipus d'entrada voleu afegir?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Un altre SO (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Un altre SO (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Un altre SO (Windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Imatge"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Arrel"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Afegeix"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Lectura-escriptura"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Taula"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "No segur"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Etiqueta"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Predeterminat"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-size"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Elimina l'entrada"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "No es permet una etiqueta buida"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Aquesta etiqueta ja està en ús"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "S'han trobat interfícies %2$s %1$s"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "En teniu una altra?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Teniu alguna interfície %s?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "No"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Sí"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Mira la informació del maquinari"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "S'està instal·lant el programa de control per a la targeta %s %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(mòdul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Quin programa de control %s he de provar?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"En alguns casos, el programa de control %s necessita informació addicional\n"
-"per funcionar correctament, tot i que normalment funciona bé sense ella.\n"
-"Voleu especificar opcions addicionals o deixar que el programa de control\n"
-"cerqui al vostre ordinador la informació que necessita? Aquesta recerca\n"
-"podria blocar l'ordinador, però això no causaria cap dany."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Exploració automàtica"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Especifica les opcions"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Ara podeu proporcionar les seves opcions per al mòdul %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Ara podeu proporcionar les seves opcions per al mòdul %s.\n"
-"Les opcions estan amb el format ``nom=valor nom2=valor2 ...''.\n"
-"Per exemple, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Opcions del mòdul:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Ha fallat la càrrega del mòdul %s.\n"
-"Voleu tornar-ho a intentar amb altres paràmetres?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(ja s'ha afegit %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Aquesta contrasenya és massa senzilla"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Si us plau, introduïu un nom d'usuari"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"El nom d'usuari només pot contenir lletres en minúscula, números, `-' i `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Aquest nom d'usuari ja s'ha afegit"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Afegeix un usuari"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introduïu un usuari\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Accepta l'usuari"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Nom real"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Nom d'usuari"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Icona"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Entrada automàtica"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Puc configurar el vostre ordinador de manera que entri automàticament amb un "
-"nom d'usuari.\n"
-"Si no voleu utilitzar aquesta característica, feu clic al botó Cancel·la."
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Escolliu l'usuari per omissió:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Escolliu el gestor de finestres per executar:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Si us plau, trieu un idioma per utilitzar."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Podeu seleccionar altres idiomes, que quedaran disponibles després de la "
-"instal·lació"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Tots"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Benvingut al %s, el selector de sistema operatiu!\n"
-"\n"
-"Trieu un sistema operatiu de la lista superior, o espereu\n"
-"%d segons per arrencar en el sistema operatiu predeterminat.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Benvingut al GRUB, el selector de sistema operatiu!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Utilitzeu les tecles %c i %c per seleccionar quina posició està ressaltada."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Premeu Intro per arrencar el SO seleccionat, 'e' per editar les"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ordres prèvies a l'arrencada, o 'c' per obtenir una línia d'ordres."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "La posició ressaltada arrencarà automàticament dintre de %d segons."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "no hi ha prou espai a /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Escriptori"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Menú Inici"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "On voleu instal·lar el carregador d'arrencada?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "encara no s'ha implementat cap ajuda.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuració del tipus d'arrencada"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Fitxer"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Fitxer/_Surt"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Monitor de categorització NewStyle"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor NewStyle"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor tradicional"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor Gtk+ tradicional"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Executa l'Aurora durant l'arrencada"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Mode LILO/Grub"
-
-#: ../../bootlook.pm_.c:102
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Benvingut a la utilitat de compartició de la connexió a Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Feu clic a Configura per executar l'auxiliar de configuració."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Configura"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Mode d'arrencada"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Mode de sistema"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Executa el sistema X-Window en iniciar"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "No, no vull l'entrada automàtica"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Sí, vull l'entrada automàtica amb aquest (usuari, escriptori)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "D'acord"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Cancel·la"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "no es pot obrir /etc/inittab per a lectura: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Ha fallat la instal·lació del LILO. S'ha produït l'error següent:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "kB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuts"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minute"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d segons"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Si us plau, feu primer una còpia de seguretat de les vostres dades"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Llegiu-ho atentament!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Si penseu utilitzar aboot, assegureu-vos de deixar espai lliure (amb 2.048\n"
-"sectors n'hi ha prou) al començament del disc"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Error"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Assistent"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Nou"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "Elimina"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Punt de muntatge"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Opcions"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Tipus"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Desmunta"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Munta"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Trieu una acció"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Teniu una partició FAT gran\n"
-"(utilitzada normalment pel DOS/Windows de Microsoft).\n"
-"Suggereixo que primer en canvieu la mida\n"
-"(feu-hi clic i després feu clic a \"Canvia la mida\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Si us plau, feu clic a una partició "
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Si us plau, feu clic a una partició "
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Si us plau, feu clic a una partició "
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Detalls"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "ha fallat el muntatge"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Intercanvia"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Buit"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Altres"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Tipus de sistema de fitxers"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Crea"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Utilitzeu ``%s'' al seu lloc"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Suprimeix"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Utilitzeu primer ``Unmount''"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Després de canviar el tipus de la partició %s, se'n perdran totes les dades"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "On voleu muntar el dispositiu %s?"
-
-#: ../../diskdrake.pm_.c:500
-#, fuzzy
-msgid "Mount options"
-msgstr "Opcions del mòdul:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:525
-#, fuzzy
-msgid "Removable media"
-msgstr "Muntatge automàtic del suport extraïble"
-
-#: ../../diskdrake.pm_.c:532
-#, fuzzy
-msgid "Change type"
-msgstr "Canvia el tipus de partició"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Quin sistema de fitxers voleu?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Servidor"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Trieu una acció"
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Crea una nova partició"
-
-#: ../../diskdrake_interactive.pm_.c:188
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Normal > Expert"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Expert > Normal"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Desfés"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Voleu continuar igualment?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Surt sense desar"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Voleu sortir sense desar la taula de particions?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Voleu comprovar la configuració?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Assigna automàticament"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Buida-ho tot"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Més"
-
-#: ../../diskdrake_interactive.pm_.c:250
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Informació del correu"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "No hi ha prou espai per a l'assignació automàtica"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "S'utilitzen totes les particions primàries"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "No puc afegir cap més partició"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Per tenir més particions, suprimiu-ne una per poder crear una partició "
-"ampliada"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Escriu la taula de particions"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Rescata la taula de particions"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Rescata la taula de particions"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Rescata la taula de particions"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Muntatge automàtic del suport extraïble"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Seleccioneu el fitxer"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La còpia de seguretat de la taula de particions no té la mateixa mida\n"
-"Voleu continuar igualment?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Advertència"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Inseriu un disquet a la unitat\n"
-"Se'n perdran totes les dades"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "S'està intentant rescatar la taula de particions"
-
-#: ../../diskdrake_interactive.pm_.c:340
-#, fuzzy
-msgid "Detailed information"
-msgstr "Informació del correu"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Canvia la mida"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Mou"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formata"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Actiu"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Afegeix al RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Afegeix al LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Elimina del RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Elimina del LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Modifica el RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Utilitza per a loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Crea una nova partició"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "sector d'inici: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Mida en MB: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Tipus de sistema de fitxers: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Punt de muntatge: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Preferència: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "S'està formatant el fitxer de loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Canvia el tipus de partició"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "On voleu muntar el fitxer de loopback %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"No es pot anul·lar el punt de muntatge, perquè aquesta partició\n"
-"s'utilitza per al loopback. Elimineu primer el loopback"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "S'estan calculant els límits del sistema de fitxers de la FAT"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "S'està canviant la mida"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "No es pot canviar la mida d'aquesta partició"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Cal fer una còpia de seguretat de totes les dades d'aquesta partició"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Després de canviar la mida de la partició %s, se'n perdran totes les dades"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Escolliu la nova mida"
-
-#: ../../diskdrake_interactive.pm_.c:591
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Mida en MB: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "A quin disc us voleu desplaçar?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "A quin sector us voleu desplaçar?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "S'està desplaçant"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "S'està desplaçant la partició..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Escolliu un RAID existent al qual afegir"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "nou"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Escolliu un LVM existent al qual afegir"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "Nom LVM?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Aquesta partició no es pot utilitzar per al loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Nom del fitxer de loopback: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nom real"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Un altre loopback ja està utilitzant el fitxer, escolliu-ne un altre"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "El fitxer ja existeix. El voleu utilitzar?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "dispositiu"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "nivell"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "mida del tros"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Aneu amb compte: aquesta operació és perillosa."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Quin tipus de particionament?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Fins al moment no puc acceptar crear el /boot a la unitat (a un cilindre > "
-"1024).\n"
-"O esteu utilitzant LILO, i no funcionarà, o no l'esteu utilitzant i no "
-"necessiteu el /boot"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"La partició que heu seleccionat per afegir com a arrel (/) està ubicada "
-"físicament més enllà del cilindre nº 1024 del disc dur, i no teniu cap "
-"partició /boot.\n"
-"Si teniu previst utilitzar el gestor d'arrencada LILO, penseu d'afegir una "
-"partició /boot"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Heu seleccionat una partició de programari RAID com a arrel (/).\n"
-"Això no ho pot gestionar cap carregador d'arrencada sense una partició /"
-"boot.\n"
-"Per tant, assegureu-vos d'afegir una partició /boot"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "La taula de particions de la unitat %s s'escriurà al disc!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Us caldrà tornar a arrencar per tal que les modificacions tinguin efecte"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Després de formatar la partició %s, se'n perdran totes les dades"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "S'està formatant"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "S'està formatant el fitxer de loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "S'està formatant la partició %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "l'mkraid ha fallit"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "No hi ha prou espai lliure per assignar noves particions"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "No hi ha prou espai lliure per assignar noves particions"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Resolució: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Dispositiu: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lletra d'unitat del DOS: %s (només és una suposició)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Tipus: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Nom: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Inici: sector %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Mida: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectors"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Cilindre %d a cilindre %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Formatat\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Sense formatar\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Muntat\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Fitxer(s) de loopback: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"La partició s'ha arrencat per defecte\n"
-"    (per a l'arrencada de l'MS-DOS, no per a LILO)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivell %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Mida del tros %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discs RAID %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nom del fitxer de loopback: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"És possible que aquesta partició sigui\n"
-"una partició de programa de control;\n"
-"és millor que no la toqueu.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Aquesta partició Bootstrap\n"
-"especial és per arrencar\n"
-"el vostre sistema en dual.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Mida: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilindres, %s capçals, %s sectors\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Informació: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discs LVM %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipus de taula de particions: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "al bus %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Opcions: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatatge de %s ha fallat"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "no sé com formatar %s amb el tipus %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "ha fallat el muntatge"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "ha fallat el muntatge: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "s'ha produït un error en muntar %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "senzill"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servidor"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "No podeu utilitzar el JFS per a particions inferiors a 16 MB"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "No podeu utilitzar el ReiserFS per a particions inferiors a 32 MB"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Els punts de muntatge han de començar amb una /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ja hi ha una partició amb el punt de muntatge %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "No podeu utilitzar un volum lògic LVM per al punt de muntatge %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Aquest directori s'ha de mantenir dins del sistema de fitxers de root"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Necessiteu un sistema de fitxers real (ext2, reiserfs) per a aquest punt de "
-"muntatge\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "S'ha produït un error en obrir %s per escriure: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"S'ha produït un error: no s'han trobat dispositius vàlids on crear nous "
-"sistemes de fitxers. Si us plau, comproveu el vostre maquinari per trobar el "
-"problema"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "No teniu cap partició!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Aquestes són les particions de Linux existents que s'han detectat a la\n"
-"vostra unitat de disc dur. Podeu conservar les eleccions fetes per "
-"l'assistent,\n"
-"són adequades per a un ús normal. Si les canvieu, heu de definir una "
-"partició\n"
-"root (\"/\"); no escolliu una partició massa petita, o no podreu instal·lar\n"
-"prou programari. Si voleu emmagatzemar les dades en una altra partició, "
-"també\n"
-"haureu de seleccionar una \"/home\" (només si teniu més d'una partició de\n"
-"Linux).\n"
-"\n"
-"\n"
-"Per a la vostra informació, cada partició està identificada d'aquesta "
-"manera: \"Nom\", \"Capacitat\".\n"
-"\n"
-"\n"
-"\"Nom\" es compon de: \"tipus d'unitat de disc\", \"número d'unitat de disc"
-"\",\n"
-"\"número de la partició\" (per exemple, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tipus d'unitat de disc\" és \"hd\" si la vostre unitat de disc és IDE i "
-"\"sd\"\n"
-"si és SCSI.\n"
-"\n"
-"\n"
-"\"Número de la unitat de disc\" és sempre una lletra després d'\"hd\" o \"sd"
-"\".\n"
-"Amb unitats de disc IDE:\n"
-"\n"
-"   * \"a\" significa \"unitat de disc mestre en el controlador IDE primari"
-"\",\n"
-"\n"
-"   * \"b\" significa \"unitat de disc esclava en el controlador IDE primari"
-"\",\n"
-"\n"
-"   * \"c\" significa \"unitat de disc mestre en el controlador IDE secundari"
-"\",\n"
-"\n"
-"   * \"d\" significa \"unitat de disc esclava en el controlador IDE secundari"
-"\".\n"
-"\n"
-"\n"
-"Amb les unitats de disc SCSI, una \"a\" significa \"unitat primària de disc"
-"\", una \"b\" significa \"unitat secundària de disc\", etc..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Ara podeu triar quins serveis voleu que s'iniciïn durant l'arrencada.\n"
-"\n"
-"\n"
-"Quan el ratolí passi sobre un element apareixerà un petit globus d'ajuda "
-"que\n"
-"explica la finalitat del servei.\n"
-"\n"
-"\n"
-"Aneu especialment amb cura en aquest pas si penseu utilitzar l'ordinador "
-"com\n"
-"a servidor: segurament no us interessarà iniciar serveis que no necessiteu.\n"
-"Recordeu que hi ha diversos serveis que poden ser perillosos si s'habiliten\n"
-"en un servidor.\n"
-"En general, seleccioneu només els serveis que realment necessiteu."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"El GNU/Linux gestiona l'hora en GMT (Hora de Greenwich) i la\n"
-"tradueix a l'hora local segons la zona horària seleccionada."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-#, fuzzy
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Ara és quan heu de decidir en quin lloc del vostre disc dur voleu "
-"instal·lar\n"
-"el sistema operatiu Mandrake Linux. Si el disc és buit, o si un sistema\n"
-"operatiu existent n'utilitza tot l'espai disponible, us caldrà particionar-\n"
-"lo. Bàsicament, particionar un disc dur consisteix en dividir-lo de manera\n"
-"lògica per crear espai on instal·lar el nou sistema Mandrake Linux.\n"
-"\n"
-"\n"
-"Atès que els efectes d'aquest procés solen ser irreversibles, el "
-"particionament \n"
-"us pot espantar si sou un usuari sense experiència.\n"
-"Aquest assistent simplifica aquest procés; abans de començar, consulteu el\n"
-"manual i preneu-vos el temps que calgui.\n"
-"\n"
-"\n"
-"Necessiteu, com a mínim, dues particions, una per al sistema operatiu en\n"
-"si i l'altra per a la memòria virtual (anomenada també \"Intercanvi\").\n"
-"\n"
-"\n"
-"Si les particions ja s'han definit (en una instal·lació anterior o "
-"mitjançant\n"
-"una altra eina de particionament), només caldrà que seleccioneu les que "
-"voleu\n"
-"utilitzar per instal·lar el sistema Linux.\n"
-"\n"
-"\n"
-"Si les particions encara no s'han definit, les heu de crear.\n"
-"Per fer-ho, utilitzeu l'assistent que trobareu més amunt; segons la\n"
-"configuració del vostre disc dur, hi ha diverses solucions possibles:\n"
-"\n"
-"* Utilitzar una partició existent: l'assistent ha detectat al vostre\n"
-"disc dur una o més particions de Linux existents. Si voleu conservar-les,\n"
-"escolliu aquesta opció.\n"
-"\n"
-"\n"
-"* Esborrar completament el disc: si voleu suprimir totes les dades i\n"
-"particions que teniu al disc dur i substituir-les pel sistema Linux-\n"
-"Mandrake, podeu escollir aquesta opció. Aneu amb compte, però, perquè,\n"
-"un cop la confirmeu, no podreu fer-vos enrere.\n"
-"\n"
-"\n"
-"* Utilitzar l'espai lliure de la partició del Windows: si teniu el "
-"Microsoft\n"
-"Windows instal·lat al disc dur i n'ocupa tot l'espai diponible, us hi "
-"caldrà\n"
-"crear espai lliure per a les dades del Linux. Per fer-ho, podeu suprimir la\n"
-"partició i les dades del Windows (consulteu les opcions \"Esborrar "
-"completament\n"
-"el disc\" o \"Mode expert\") o canviar la mida de la partició del Windows;\n"
-"aquest canvi de mida es pot dur a terme sense cap pèrdua de dades. Aquesta\n"
-"opció és la més recomanable si voleu utilitzar tant el Mandrake Linux com "
-"el\n"
-"Microsoft Windows al mateix ordinador.\n"
-"\n"
-"\n"
-"  Abans de decidir-vos per aquesta opció, tingueu en compte que la mida\n"
-"de la partició del Microsoft Windows serà més petita que ara. Això "
-"significa\n"
-"que tindreu menys espai lliure per emmagatzemar-hi dades o instal·lar-hi "
-"més\n"
-"programari.\n"
-"\n"
-"\n"
-"* Mode expert: si voleu particionar el disc dur manualment, podeu triar\n"
-"aquesta opció. Aneu amb compte, perquè és molt potent però també perillosa;\n"
-"podeu perdre fàcilment totes les dades. Per tant, no trieu aquesta opció "
-"tret\n"
-"que sapigueu exactament què esteu fent."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Les particions que s'acaben de definir s'han de formatar per poder-les\n"
-"utilitzar. El formatatge consisteix en crear-hi un sistema de fitxers).\n"
-"\n"
-"\n"
-"En aquest punt, potser voldreu tornar a formatar algunes de les particions\n"
-"existents per eliminar les dades que contenen. Si és així, seleccioneu les\n"
-"particions que voleu formatar.\n"
-"\n"
-"\n"
-"Tingueu en compte que no cal tornar a formatar totes les particions que ja\n"
-"existien; heu de tornar a formatar les particions que contenen el sistema\n"
-"operatiu (com ara \"/\", \"/usr\" o \"/var\"), però no les que contenen "
-"dades\n"
-"que voleu conservar (habitualment, /home).\n"
-"\n"
-"\n"
-"Aneu amb compte en seleccionar les particions; després del formatatge, "
-"totes\n"
-"les dades s'hauran suprimit i no en podreu recuperar cap.\n"
-"\n"
-"\n"
-"Feu clic a \"D'acord\" quan estigueu a punt per formatar les particions.\n"
-"\n"
-"\n"
-"Feu clic a \"Cancel·la\" si voleu seleccionar altres particions per "
-"instal·lar\n"
-"el nou sistema Mandrake Linux."
-
-#: ../../help.pm_.c:376
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"El nou sistema operatiu Mandrake Linux s'està instal·lant. Aquesta\n"
-"operació trigarà uns quants minuts (dependrà de la mida total que\n"
-"hagueu escollit instal·lar i de la velocitat del vostre ordinador).\n"
-"\n"
-"\n"
-"Si us plau, tingueu paciència."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-#, fuzzy
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Ara és quan heu de decidir quina(es) partició(ns) voleu utilitzar per\n"
-"instal·lar el sistems Mandrake Linux. Si ja s'han definit les particions "
-"(amb\n"
-"una instal·lació anterior de GNU/Linux o mitjançant una altra eina de\n"
-"particionament), podeu utilitzar les particiones existents. En cas "
-"contrari,\n"
-"s'han de definir particions al disc dur.\n"
-"\n"
-"\n"
-"Per crear particions, primer heu de seleccionar un disc dur. Podeu "
-"seleccionar\n"
-"el disc que s'ha de particionar fent clic a \"hda\" per a la primera unitat\n"
-"IDE, \"hdb\" per a la segona o \"sda\" per a la primera unitat SCSI, etc.\n"
-"\n"
-"\n"
-"Per particionar el disc dur seleccionat, podeu utilitzar aquestes opcions:\n"
-"\n"
-"   * Buidar-ho tot: aquesta opció suprimeix totes les particions que hi ha\n"
-"al disc dur seleccionat.\n"
-"\n"
-"\n"
-"   * Assignació automàtica: aquesta opció us permet crear automàticament "
-"les\n"
-"particions Ext2 i Intercanvi en l'espai lliure del disc dur.\n"
-"\n"
-"\n"
-"   * Rescatar la taula de particions: si la taula de particions està\n"
-"malmesa, podeu intentar recuperar-la mitjançant aquesta opció. Aneu\n"
-"amb compte i penseu que això pot fallar.\n"
-"\n"
-"\n"
-"   * Desfer: podeu utilitzar aquesta opció per anul·lar els canvis.\n"
-"\n"
-"\n"
-"   * Tornar a carregar: podeu utilitzar aquesta opció si voleu desfer\n"
-"tots els canvis i carregar la taula de particions inicial.\n"
-"\n"
-"\n"
-"   * Assistent: Si voleu utilitzar un assistent per particionar el disc "
-"dur,\n"
-"podeu utilitzar aquesta opció, que és la més recomanable si no teniu massa\n"
-"experiència en particionament.\n"
-"\n"
-"\n"
-"   * Restaurar des de disquet: si, en una instal·lació anterior, vau desar\n"
-"la taula de particions en un disquet, podeu recuperar-la mitjançant aquesta\n"
-"opció.\n"
-"\n"
-"\n"
-"   * Desar en disquet: si voleu desar la taula de particions en un disquet\n"
-"per poder-la recuperar, podeu utilitzar aquesta opció. És molt recomanable\n"
-"que l'utilitzeu.\n"
-"\n"
-"\n"
-"   * Fet: quan hagueu acabat de particionar el disc dur, utilizeu aquesta\n"
-"opció per desar els canvis.\n"
-"\n"
-"\n"
-"Per a la vostra informació, podeu accedir a qualsevol opció mitjançant el "
-"teclat:\n"
-"moveu-vos per les particions amb la tecles Tab i Fletxa amunt/Fletxa avall.\n"
-"\n"
-"\n"
-"Quan s'ha seleccionat una partició, podeu utilitzar:\n"
-"\n"
-"           * Ctrl+C per crear una nova partició (quan se n'ha seleccionat\n"
-"una de buida)\n"
-"\n"
-"           * Ctrl+D per suprimir una partició\n"
-"\n"
-"           * Ctrl+M per definir el punt de muntatge\n"
-"           \n"
-"\n"
-"           \n"
-"Si esteu fent la instal·lació en un ordinador PPC, potser voldreu crear una\n"
-"petita partició 'bootstrap' HFS d'un mínim d'1 MB per a ús del carregador\n"
-"d'arrencada 'yaboot'. Si decidiu fer-la una mica més gran, per exemple de\n"
-"50 MB, us serà d'utilitat per emmagatzemar un nucli de recanvi i una imatge\n"
-"del disc RAM per a situacions d'emergència durant l'arrencada."
-
-#: ../../help.pm_.c:460
-#, fuzzy
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"S'ha detectat més d'una partició de Microsoft Windows en la unitat de disc.\n"
-"Si us plau, trieu quina d'elles voleu redimensionar per instal·lar el nou\n"
-"sistema operatiu Mandrake Linux.\n"
-"\n"
-"\n"
-"Per a la vostra informació, cada partició està identificada d'aquesta "
-"manera; \"Nom Linux\", \"Nom\n"
-"Windows\" \"Capacitat\".\n"
-"\n"
-"\"Nom Linux\" es compon de: \"tipus d'unitat de disc\", \"número d'unitat de "
-"disc\",\n"
-"\"número de la partició\" (per exemple, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tipus d'unitat de disc\" és \"hd\" si la vostre unitat de disc és IDE i "
-"\"sd\"\n"
-"si és SCSI.\n"
-"\n"
-"\n"
-"\"Número de la unitat de disc\" és sempre una lletra després d'\"hd\" o \"sd"
-"\".\n"
-"Amb unitats de disc IDE:\n"
-"\n"
-"   * \"a\" significa \"unitat de disc mestre en el controlador IDE primari"
-"\",\n"
-"\n"
-"   * \"b\" significa \"unitat de disc esclava en el controlador IDE primari"
-"\",\n"
-"\n"
-"   * \"c\" significa \"unitat de disc mestre en el controlador IDE secundari"
-"\",\n"
-"\n"
-"   * \"d\" significa \"unitat de disc esclava en el controlador IDE secundari"
-"\".\n"
-"\n"
-"\n"
-"Amb les unitats de disc SCSI, una \"a\" significa \"unitat primària de disc"
-"\", una \"b\" significa \"unitat secundària de disc\", etc...\n"
-"\n"
-"\"Nom Windows\" és la lletra de la vostra unitat de disc sota Windows (el "
-"primer disc o partició s'anomena \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-"Si us plau, tingueu paciència. Aquesta operació pot trigar diversos minuts."
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Escolliu \"Instal·lació\" si no teniu cap versió anterior de Mandrake Linux\n"
-"instal·lada a l'ordinador o si voleu utilitzar diversos sistemes operatius.\n"
-"\n"
-"\n"
-"Escolliu \"Actualització\" si voleu actualitzar un versió de Mandrake Linux "
-"que ja està instal·lada.\n"
-"\n"
-"\n"
-"Segons els vostres coneixements de GNU/Linux, podeu escollir un dels "
-"nivells\n"
-"següents d'instal·lació o actualització del sistema operatiu Mandrake "
-"Linux:\n"
-"\n"
-"* Recomanada: si mai no heu instal·lat un sistema operatiu GNU/Linux,\n"
-"escolliu aquest. La instal·lació serà molt fàcil i només se us faran\n"
-"unes poques preguntes.\n"
-"\n"
-"\n"
-"* Personalitzada: si coneixeu prou el GNU/Linux, podeu escollir l'ús\n"
-"principal (estació de treball, servidor, desenvolupament) del vostre\n"
-"sistema. Haureu de respondre més preguntes que en la instal·lació\n"
-"\"Recomanada\", de manera que, si escolliu aquest tipus d'instal·lació,\n"
-"haureu de saber com funciona el GNU/Linux.\n"
-"\n"
-"\n"
-"* Per a experts: si domineu el GNU/Linux, trieu aquest tipus\n"
-"d'instal·lació. Com en el cas de la instal·lació \"Personalitzada\"\n"
-"podreu escollir l'ús principal del vostre ordinador (estació de treball,\n"
-"servidor, desenvolupament). Aneu amb molt de compte abans de triar aquest\n"
-"tipus d'instal·lació; podreu realitzar una instal·lació altament\n"
-"personalitzada.\n"
-"  La resposta a algunes preguntes pot ser molt difícil si no teniu sòlids\n"
-"coneixements de GNU/Linux. Per tant, no escolliu aquest tipus "
-"d'instal·lació\n"
-"tret que sapigueu què esteu fent."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Si us plau, seleccioneu el port correcte. Per exemple, el port COM1 en MS\n"
-"Windows s'anomena ttyS0 en GNU/Linux."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"El LILO (Linux Loader, carregador de Linux) i el Grub són carregadors\n"
-"d'arrencada: poden arrencar el GNU/Linux o qualsevol altre sistema operatiu\n"
-"que tingueu a l'ordinador. Normalment, aquests altres sistemes operatius\n"
-"es detecten i instal·len correctament, però si no és així, podeu afegir-los\n"
-"manualment en aquesta pantalla. Aneu amb compte de triar els paràmetres\n"
-"correctes.\n"
-"\n"
-"\n"
-"També és possible que no volgueu donar accés a tothom a aquests sistemes\n"
-"operatius; en aquest cas podeu suprimir les entrades corresponents, però\n"
-"aleshores us caldrà un disc d'arrencada per poder-los arrencar!"
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Heu d'indicar on voleu situar la informació necessària per\n"
-"arrencar el GNU/Linux.\n"
-"\n"
-"\n"
-"Tret que sabeu exactament què esteu fent, escolliu \"Primer sector\n"
-"de la unitat (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"El DrakX intentarà trobar el(s) adaptador(s) SCSI PCI. \n"
-"Si en troba, i sap quin programa de control utilitzar, el(s)\n"
-"instal·larà automàticament.\n"
-"\n"
-"\n"
-"Si no teniu cap adaptador SCSI, un adaptador SCSI ISA, o un\n"
-"adaptador SCSI PCI que el DrakX no reconegui, se us demanarà si teniu\n"
-"un adaptador SCSI al sistema. Si no en teniu cap, simplement feu clic a \"No"
-"\". Si feu\n"
-"clic a \"Sí\", apareixerà una llista de programes de control on podreu\n"
-"seleccionar l'adaptador concret.\n"
-"\n"
-"\n"
-"Si heu hagut de seleccionar l'adaptador manualment, el DrakX us preguntarà\n"
-"si voleu indicar opcions per a ell. Convé que deixeu que el DrakX comprovi\n"
-"el maquinari per a les opcions; això sol funcionar bé.\n"
-"\n"
-"\n"
-"Si no, us caldrà proporcionar les opcions al programa de control. Consulteu\n"
-"el capítol 3 de la Guia de l'usuari, secció \"Informació obtinguda del\n"
-"maquinari\" per saber com treure aquesta informació de la documentació del\n"
-"maquinari, del lloc web del fabricant (si teniu accés a Internet) o del\n"
-"Microsoft Windows (si el teniu al sistema)."
-
-#: ../../help.pm_.c:720
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Podeu afegir entrades addicionals per al yaboot, ja sigui per a altres\n"
-"sistemes operatius, nuclis alternatius, o per a una imatge per a arrencades\n"
-"d'emergència.\n"
-"\n"
-"\n"
-"Per a altres OS, l'entrada només consta d'una etiqueta i de la partició "
-"arrel.\n"
-"\n"
-"\n"
-"Per al Linux, hi ha algunes opcions possibles: \n"
-"\n"
-"\n"
-"  - Label: és només el nom a indicar a l'indicador del yaboot per\n"
-"seleccionar aquesta opció d'arrencada.\n"
-"\n"
-"\n"
-"  - Image: el nom del nucli a arrencar. Normalment, vmlinux o una\n"
-"variació de vmlinux amb una extensió.\n"
-"\n"
-"\n"
-"  - Rool: el dispositiu arrel o '/' per a la instal·lació del Linux.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: en maquinari Apple, l'opció d'addició de nuclis s'utilitza\n"
-"força sovint per auxiliar en la inicialització de maquinari de vídeo o per\n"
-"habilitar l'emulació del botó del ratolí de teclat per als 2n i 3r botons,\n"
-"que sovint no existeixen, d'un ratolí Apple convencional. Alguns exemples\n"
-"d'això són:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: aquesta opció es pot utilitzar per carregar els mòduls "
-"inicials,\n"
-"abans que el dispostiu d'arrencada estigui disponible, o per tornar a "
-"carregar\n"
-"una imatge de disc RAM en una situació d'arrencada d'emergència.\n"
-"\n"
-"\n"
-"  - Initrd-size: la mida per defecte del disc RAM sol ser de 4.096 bytes. Si "
-"necessiteu assignar un disc RAM gran, podeu utilitzar aquesta opció.\n"
-"\n"
-"\n"
-"  - Read-write: normalment, la partició 'root' es tracta inicialment com "
-"només de lectura per permetre una comprovació del sistema de fitxers abans "
-"que el sistema esdevingui 'viu'; podeu substituir aquesta opció aquí.\n"
-"\n"
-"\n"
-"  - NoVideo: en cas que el maquinari de vídeo de Apple resulti sigui\n"
-"especialment problemàtic, podeu seleccionar aquesta opció per arrencar\n"
-"en mode 'no-vídeo', amb el suport nadiu per a memòria intermèdia de marcs.\n"
-"\n"
-"\n"
-"  - Default: selecciona aquesta entrada com a selecció per defecte del\n"
-"Linux; se selecciona prement simplement Retorn a l'indicador del yaboot.\n"
-"Aquesta opció també es ressaltarà amb un '*' si premeu Tab per veure les\n"
-"seleccions d'arrencada."
-
-#: ../../help.pm_.c:765
-#, fuzzy
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"El Yaboot és un carregador d'arrencada per a maquinari NewWorld MacIntosh.\n"
-"Pot arrencar tant el GNU/Linux com el MacOS o el MacOSX, si és que els "
-"teniu\n"
-"a l'ordinador. Normalment, aquests altres sistemes operatius es detecten i\n"
-"instal·len correctament; si no és així, però, en aquesta pantalla podeu\n"
-"afegir una entrada manualment. Aneu amb compte de triar els paràmetres\n"
-"correctes.\n"
-"\n"
-"\n"
-"Les opcions principals del Yaboot són:\n"
-"\n"
-"\n"
-"  - Missatge d'inicialització: un senzill missatge de text que apareix "
-"abans\n"
-"de l'indicador d'arrencada.\n"
-"\n"
-"\n"
-"  - Dispositiu d'arrencada: indica on voleu situar la informació necessària\n"
-"per arrencar el GNU/Linux. Normalment, haureu configurat abans una partició\n"
-"bootstrap que contindrà aquesta informació.\n"
-"\n"
-"\n"
-"  - Demora de l'Open Firmware: a diferència del LILO, amb el Yaboot hi ha\n"
-"dues demores disponibles. La primera d'elles es mesura en segons i, en "
-"aquest\n"
-"punt, podeu triar entre CD, arrencada OF, MacOS o Linux.\n"
-"\n"
-"\n"
-"  - Temps màxim d'arrencada del nucli: aquest temps màxim és similar a la "
-"demora d'arrencada del LILO. Després de seleccionar el Linux tindreu aquesta "
-"demora en 0,1 segons abans que se seleccioni la descripció per defecte del "
-"nucli.\n"
-"\n"
-"\n"
-"  - Habilitar l'arrencada des de CD?: si activeu aquesta opció podreu triar\n"
-"'C' per a CD al primer indicador de l'arrencada.\n"
-"\n"
-"\n"
-"  - Habilitar l'arrencada OF?: si activeu aquesta opció podreu triar 'N' "
-"per\n"
-"Open Firmware al primer indicador de l'arrencada.\n"
-"\n"
-"\n"
-"  - OS per defecte: podeu seleccionar amb quin OS, per defecte, s'arrencarà\n"
-"quan la demora de l'Open Firmware venci."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Escolliu el disc dur que voleu buidar per instal·lar la nova partició "
-"Linux-\n"
-"Mandrake. Aneu amb compte, se'n perdran totes les dades i no es podran "
-"recuperar."
-
-#: ../../help.pm_.c:832
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Feu clic a \"D'acord\" si voleu suprimir totes les dades i\n"
-"particions que hi ha en aquesta unitat de disc. Aneu amb compte, perquè, un "
-"cop hagueu fet clic a \"D'acord\", no podreu recuperar cap dada ni partició "
-"del disc,\n"
-"incloent las dades de Windows.\n"
-"\n"
-"\n"
-"Feu clic a \"Cancel·la\" per anul·lar aquesta operació sense perdre cap "
-"dada\n"
-"ni partició d'aquest disc."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "No es pot utilitzar l'emissió sense un domini NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Inseriu un disquet formatat amb FAT a la unitat %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Aquest disquet no està formatat en FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Per utilitzar aquesta selecció de paquets desada, arrenqueu la instal·lació "
-"amb ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "S'ha produït un error en llegir el fitxer %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "D'acord"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Part del maquinari del vostre ordinador necessita programes de control\n"
-"``registrats'' per poder funcionar. En podeu trobar informació a: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Heu de tenir una partició arrel.\n"
-"Per fer-ho, creeu una partició (o feu clic a una d'existent).\n"
-"Després, trieu l'acció ``Punt de muntatge'' i doneu-li el valor '/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Heu de tenir una partició d'intercanvi"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"No teniu cap partició d'intercanvi\n"
-"\n"
-"Voleu continuar igualment?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Heu de tenir una partició d'intercanvi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Utilitza l'espai lliure"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "No hi ha prou espai lliure per assignar noves particions"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Utilitza la partició existent"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "No existeix cap partició per utilitzar"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Utilitza la particio Windows per al loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Quina partició voleu utilitzar per al Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Escolliu les mides"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Mida de la partició arrel en MB: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Mida de la partició d'intercanvi en MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Utilitza l'espai lliure de la partició de Windows"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "A quina partició voleu canviar la mida?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "S'estan calculant els límits del sistema de fitxers de Windows"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"El redimensionador de la FAT no pot gestionar la vostra partició, \n"
-"s'ha produït l'error següent: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"La partició de Windows està massa fragmentada; si us plau, executeu "
-"``defrag'' primer"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATENCIÓ!\n"
-"\n"
-"Ara, el DrakX canviarà la mida de la vostra partició de Windows. Aneu amb\n"
-"compte: aquesta operació és perillosa. Si encara no ho heu fet, sortiu de "
-"la\n"
-"instal·lació, executeu l'Scandisk sota Windows (i potser també el Defrag), "
-"i\n"
-"torneu a començar la instal·lació. Feu també una còpia de seguretat de les\n"
-"vostres dades.\n"
-"Quan estigueu segur, premeu D'acord."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Quina mida voleu deixar per a la partició de Windows?"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "partició %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Ha fallat la redimensió de la FAT: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"No hi ha particions FAT a què canviar la mida o per utilitzar-les com a "
-"loopback (o no queda prou espai)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Esborra el disc complet"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Elimina el Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Teniu més d'un disc dur; en quin voleu instal·lar el Linux?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Es perdran TOTES les particions, i les dades que contenen, de la unitat %s"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Particionament personalitzat de disc"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Utilitza l'fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Ara podeu fer les particions a %s.\n"
-"Quan acabeu, no oblideu desar-les utiltzant `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "No teniu prou espai lliure a la partició de Windows"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "No puc trobar espai per a la instal·lació"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"L'assistent de particionament del DrakX ha trobat les solucions següents:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ha fallat el particionament: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "S'està activant la xarxa"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "S'està desactivant la xarxa"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"S'ha produït un error, però no sé com gestionar-lo correctament.\n"
-"Si continueu, és sota la vostra responsabilitat."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplica el punt de muntatge %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Alguns paquets importants no s'han instal·lat correctament.\n"
-"La vostra unitat de CD-ROM, o bé el CD-ROM, són defectuosos.\n"
-"Comproveu el CD-ROM en un ordinador instal·lat mitjançant \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Benvingut a %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "No hi ha cap unitat de disquet disponible"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "S'està introduint el pas `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Escolliu la mida que voleu instal·lar"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Mida total: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versió: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Mida: %d kB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Escolliu els paquets que voleu instal·lar"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Informació"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Instal·la"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "S'està instal·lant"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Si us plau, espereu, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Temps restant "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Temps total "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "S'està preparant la instal·lació"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "S'està instal·lant el paquet %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Voleu seguir igualment?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "S'ha produït un error en ordenar els paquets"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Voleu utilitzar la configuració existent per a X11?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"El vostre sistema està baix de recursos; podeu tenir algun problema en\n"
-"instal·lar el Mandrake Linux. Si això passa, podeu provar d'instal·lar-lo "
-"en\n"
-"mode text. Per fer-ho, premeu `F1' en arrencar des del CD-ROM i escriviu "
-"`text'"
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Tipus d'instal·lació"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Si us plau, trieu un dels tipus d'instal·lació següents:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"La mida total dels grups que heu seleccionat es d'aproximadament %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Si no voleu instal·lar tants MB, seleccioneu el percentatge de paquets\n"
-"que voleu instal·lar.\n"
-"\n"
-"Un percentatge baix instal·larà només els paquets més importants;\n"
-"un percentatge del 100%% instal·larà tots els paquets seleccionats."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Només teniu prou espai al disc per a %d%% d'aquests paquets.\n"
-"\n"
-"Si en voleu instal·lar menys, seleccioneu el percentatge de paquets\n"
-"que voleu instal·lar.\n"
-"Un percentatge baix instal·larà només els paquets més importants;\n"
-"un percentatge del %d%% instal·larà tants paquets com sigui possible."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Podreu fer una elecció més concreta al pas següent"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Percentatge de paquets per instal·lar"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Selecció del grup de paquets"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Selecció individual de paquets"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Mida total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Paquet incorrecte"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nom: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importància: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"No podeu seleccionar aquest paquet perquè no queda prou espai per instal·lar-"
-"lo"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Ara s'instal·laran els paquets següents"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Ara s'eliminaran els paquets següents"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "No podeu seleccionar/desseleccionar aquest paquet"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Aquest paquet és obligatori; no es pot deseleccionar"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "No podeu desseleccionar aquest paquet; ja està instal·lat"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Aquest paquet s'ha d'actualitzar\n"
-"Esteu segur que voleu desseleccionar-lo?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "No podeu desseleccionar aquest paquet; s'ha d'actualitzar"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Mostra automàticament els paquets seleccionats"
-
-#: ../../install_steps_gtk.pm_.c:460
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Desa al disquet"
-
-#: ../../install_steps_gtk.pm_.c:461
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Desa la selecció de paquets"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Minimal install"
-msgstr "Desinstal·la"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "S'està estimant"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Si us plau, espereu, s'està preparant la instal·lació"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d paquets"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Si us plau, llegiu atentament les clàusules següents. Si no esteu\n"
-"d'acord amb qualsevol d'elles, no esteu autoritzat a instal·lar\n"
-"els CD següents. Premeu 'Rebutja-ho' per continuar la instal·lació\n"
-"sense utilitzar aquests CD.\n"
-"\n"
-"\n"
-"Alguns dels components que s'inclouen en aquest CD no estan\n"
-"regits per la llicència GPL o acords semblants. Cada un d'aquests\n"
-"components es regeix per les clàusules i condicions de la seva\n"
-"pròpia llicència específica. Si us plau, llegiu atentament i\n"
-"accepteu aquestes llicències específiques abans d'utilitzar o\n"
-"redistribuir els components esmentats. En general, aquestes\n"
-"llicències impedeixen la transferència, duplicació (excepte amb\n"
-"la finalitat de fer-ne còpies de seguretat), redistribució,\n"
-"enginyeria inversa, deassemblatge, decompilació o modificació del\n"
-"component. Qualsevol violació de l'acord finalitzarà immediatament\n"
-"els vostres drets sobre la llicència específica. Tret que la\n"
-"llicència específica us en garanteixi els drets, normalment no\n"
-"podreu instal·lar els programes en més d'un sistema, ni adaptar-lo\n"
-"per utilitzar-lo en una xarxa. En cas de dubte, poseu-vos en\n"
-"contacte directament amb el distribuïdor o editor del component.\n"
-"La transferència a terceres parts i la còpia d'aquests components,\n"
-"incloent la documentació, estan normalments prohibides.\n"
-"\n"
-"\n"
-"Tots els drets sobre els components del CD següent pretanyen als\n"
-"seus autors respectius i estan protegits per les lleis de\n"
-"propietat intel·lectual i de copyright aplicables als programes\n"
-"informàtics.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Accepta"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Rebutja"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Canvieu el vostre CD-ROM!\n"
-"\n"
-"Si us plau, inseriu el CD-ROM etiquetat com \"%s\" a la unitat i després\n"
-"premeu D'acord.\n"
-"Si no el teniu, premeu Cancel·la per no fer la instal·lació des d'aquest CD-"
-"ROM."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "S'ha produït un error en instal·lar els paquets"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "S'ha produït un error"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Acord de llicència"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introducció\n"
-"\n"
-"D'ara endavant, hom es referirà al sistema operatiu i als diferents\n"
-"components disponibles en la distribució Mandrake Linux com als\n"
-"\"Productes de programari\". Els Productes de programari inclouen,\n"
-"però no estan restringits a, el conjunt de programes, mètodes, regles\n"
-"i documentació relativa al sistema operatiu i els diferents\n"
-"components de la distribució Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Acord de llicència\n"
-"\n"
-"Si us plau, llegiu atentament aquest document. Aquest document és un\n"
-"acord de llicència entre la vostra persona i MandrakeSoft S.A., que\n"
-"s'aplica als Productes de programari. Pel fet d'instal·lar, duplicar\n"
-"o utilitzar els Productes de programari en qualsevol forma esteu\n"
-"acceptant explícitament, i expressant el vostre acord a, avenir-vos a\n"
-"les clàusules i condicions d'aquesta Llicència. Si no esteu d'acord\n"
-"amb qualsevol part de la Llicència, no esteu autoritzat a instal·lar,\n"
-"duplicar o utilitzar els Productes de programari. Qualsevol intent\n"
-"d'instal·lar, duplicar o utilitzar els Productes de programari en una\n"
-"forma que no s'adapti a les clàusules i condicions d'aquesta\n"
-"Llicència, és nul i finalitzarà els vostres drets sobre la mateixa.\n"
-"En finalitzar-se la Llicència, heu de destruir immediatament totes\n"
-"les còpies dels Productes de programari.\n"
-"\n"
-"\n"
-"2. Garantia limitada\n"
-"\n"
-"Els Productes de programari i documentació adjunta es subministren\n"
-"\"tal com són\", sense cap garantia, fins al punt permés per la llei.\n"
-"MandrakeSoft S.A. no serà, sota cap circumstància, i fins al punt\n"
-"permés per la llei, responsable de cap dany especial, incidental ni\n"
-"directe (incloent, sense limitar-se a, els danys per pèrdua de\n"
-"negocis, interrupció de negocis, pèrdues financeres, multes i costes\n"
-"judicials, o qualsevol altre dany que resultin d'un judici, o\n"
-"qualsevol altre pèrdua d'importància) que resulti de l'ús o de la\n"
-"impossibilitat d'utilitzar els Productes de programari, fins i tot si\n"
-"MandrakeSoft S.A. ha estat avisat de la possibilitat que\n"
-"s'esdevinguin aquests danys.\n"
-"\n"
-"RESPONSABILITAT LIMITADA RELATIVA A LA POSSESSIÓ O UTILITZACIÓ DE PROGRAMARI "
-"PROHIBIT EN ALGUNS PAÏSOS\n"
-"\n"
-"Fins al punt permés per la llei, MandrakeSoft S.A. o els seus\n"
-"distribuïdors no seran, sota cap circumstància, responsables de cap\n"
-"dany especial, incidental ni directe (incloent, sense limitar-se a,\n"
-"els danys per pèrdua de negocis, interrupció de negocis, pèrdues\n"
-"financeres, multes i costes judicials, o qualsevol altre dany que\n"
-"resultin d'un judici, o qualsevol altre pèrdua d'importància) que\n"
-"resulti de la possessió i utilització dels components de programari o\n"
-"de la seva descàrrega des d'un dels llocs de Mandrake Linux, que\n"
-"estiguin prohibides o restringides en alguns països per les lleis\n"
-"locals. Aquesta responsabilitat limitada s'aplica, però no està\n"
-"limitada a, els potents components criptogràfics inclosos als\n"
-"Productes de programari.\n"
-"\n"
-"\n"
-"3. la llicència GPL i llicències relacionades\n"
-"\n"
-"Els Productes de programari consisteixen en components creats per\n"
-"diferents persones o entitats. La majoria d'aquests components es\n"
-"regeixen per les clàusules i condicions de la Llicència General\n"
-"Pública de GNU, a la qual d'ara endavant hom s'hi referirà com a\n"
-"\"GPL\", o de llicències similars. la majoria d'aquestes llicències\n"
-"us permeten duplicar, adaptar o redistribuir els components que\n"
-"cobreixen. Si us plau, llegiu atentament les clàusules i condicions\n"
-"de l'acord de llicència de cada component abans d'utilitzar-lo.\n"
-"Qualsevol pregunta sobre la lllicència d'un component s'ha d'adreçar\n"
-"al seu autor i no a MandrakeSoft.\n"
-"Els programes desenvolupats per MandrakeSoft S.A. es regeixen per la\n"
-"llicència GPL.La documentació escrita per MandrakeSoft S.A. està regida per "
-"una\n"
-"llicència específica; consulteu la documentació per a més\n"
-"informació.\n"
-"\n"
-"\n"
-"4. Drets sobre la propietat intel·lectual\n"
-"\n"
-"Tots els drets sobre els components dels Productes de programari\n"
-"pertanyen als seus autors respectius i estan protegits per les lleis\n"
-"de propietat intel·lectual i de copyright aplicables als programes\n"
-"informàtics.\n"
-"MandrakeSoft S.A. es reserva els drets de modificar o adaptar els\n"
-"Productes de programari, totalment o parcialment, per tots els\n"
-"mitjans i amb totes les finalitats.\n"
-"\"Mandrake\", \"Mandrake Linux\" i els logotips associats son marques\n"
-"registrades de MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. Lleis rectores \n"
-"\n"
-"Si qualsevol part d'aquest acord és declarat nul, il·legal o\n"
-"inaplicable per un tribunal, aquesta part s'exclourà del contracte.\n"
-"Seguiu obligat, però, per les altres seccions aplicables de\n"
-"l'acord.\n"
-"Les clàusules i condicions d'aquesta Llicència es regeixen per les\n"
-"lleis de França.\n"
-"Tots els litigis sobre les clàusules d'aquesta llicència es dirimiran\n"
-"preferiblement fora dels tribunals. Com a últim recurs, el litigi es\n"
-"portarà als tribunals competents de París, França.\n"
-"Per a qualsevol tema relacionat amb aquest document, poseu-vos en\n"
-"contacte amb MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teclat"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Si us plau, selecioneu la disposició del vostre teclat."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Aquesta és la llista completa de teclats disponibles"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Quin tipus d'instal·lació voleu?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Instal·la/Actualitza"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Es tracta d'una instal·lació o d'una actualització?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Recomanada"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Actualitza"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Si us plau, seleccioneu el vostre tipus de ratolí."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Port del ratolí"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-"Si us plau, seleccioneu el port sèrie a què està connectat el vostre ratolí."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Emulació dels botons"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Emulació del botó 2"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Emulació del botó 3"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "S'estan configurant les targetes PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "S'està configurant l'IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "no hi ha particions disponibles"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "S'estan explorant les particions per trobar els punts de muntatge"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Escolliu els punts de muntatge"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"No puc llegir la vostra taula de particions, està massa malmesa per a mi :(\n"
-"Intentaré seguir, buidant les particions incorrectes (es perdran TOTES LES "
-"DADES!).\n"
-"L'altra solució és impedir al DrakX que modifiqui la taula de particions.\n"
-"(l'error és %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"El DiskDrake no ha pogut llegir correctament la taula de particions.\n"
-"Si continueu, és sota la vostra responsabilitat!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:349
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "No s'ha trobat cap partició arrel"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Partició arrel"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Quina és la partició arrel (/) del vostre sistema?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Us caldrà tornar a arrencar per tal que les modificacions de la taula de "
-"particions tinguin efecte"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Escolliu les particions que voleu formatar"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Voleu comprovar els blocs incorrectes?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "S'estan formatant les particions"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "S'està creant i formatant el fitxer %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"No hi ha prou intercanvi per completar la instal·lació; si us plau, afegiu-ne"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "S'estan cercant els paquets disponibles"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "S'estan cercant els paquets a actualitzar"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Al vostre sistema no li queda prou espai per a la instal·lació o "
-"actualització (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completa (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Mínima (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomanada (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Personalitzada"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:525
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Restaura des del disquet"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Restaura des del disquet"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Package selection"
-msgstr "Selecció del grup de paquets"
-
-#: ../../install_steps_interactive.pm_.c:532
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Inseriu un disquet a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Desa al disquet"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Si teniu tots els CD de la llista inferior, feu clic a D'acord.\n"
-"Si no teniu cap d'aquests CD, feu clic a Cancel·la.\n"
-"Si només falten alguns CD, desseleccioneu-los i feu clic a D'acord."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM etiquetat com \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"S'està instal·lant el paquet %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Publica la configuració de la instal·lació "
-
-#: ../../install_steps_interactive.pm_.c:719
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Inseriu un disquet a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Inseriu un disquet en blanc a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Ara teniu la possibilitat de descarregar programari destinat al xifratge.\n"
-"\n"
-"AVÍS:\n"
-"Degut a diversos requeriments generals aplicables a aquest programari, i\n"
-"imposats per diverses jurisdiccions, el client i/o l'usuari final d'aquest\n"
-"programari s'ha(n) d'assegurar que les lleis de la(es) seva(es)\n"
-"jurisdicció(ns) li(els) permeten descarregar-lo, emmagatzemar-lo i/o\n"
-"utilitzar-lo.\n"
-"\n"
-"A mes, el client i/o l'usuari final ha(n) de tenir especialment en compte\n"
-"que no ha(n) d'infrigir les lleis de la(es) seva(es) jurisdicció(ns). Si\n"
-"el client i/o l'usuari final no respecta(en) les disposicions d'aquestes\n"
-"lleis, pot(den) ser severament sancionat(s).\n"
-"\n"
-"Mandrakesoft i els seus fabricants i/o proveïdors no seran en cap cas\n"
-"responsables de cap dany especial, indirecte o incidental (incloent,\n"
-"però sense limitar-se a, la pèrdua de beneficis, interrupció del negoci,\n"
-"pèrdua de dades comercials i altres pèrdues econòmiques, i eventuals\n"
-"responsabilitats i idemnitzacions que s'hagin de pagar per sentència\n"
-"judicial) derivat de l'ús, la possessió o la simple descàrrega d'aquest\n"
-"programari, al qual el client i/o l'usuari final pugui(n), eventualment,\n"
-"tenir accés després d'haver signat el present acord.\n"
-"\n"
-"Per a qualsevol consulta relativa a aquest acord, podeu adreçar-vos a \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Escolliu un mirror al qual aconseguir els paquets"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"S'està contactant amb el mirror per obtenir la llista dels paquets "
-"disponibles"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Si us plau, escolliu els paquets que voleu instal·lar"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "En quina zona horària us trobeu?"
-
-#: ../../install_steps_interactive.pm_.c:813
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "El rellotge del vostre ordinador està regulat a GMT?"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:821
-#, fuzzy
-msgid "NTP Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remot"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Cap impressora"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Resum"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Ratolí"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Zona horària"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Impressora"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "Targeta XDSI"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Targeta de so"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "Targeta de TV"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-#, fuzzy
-msgid "NIS"
-msgstr "Utilitza el NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-#, fuzzy
-msgid "Local files"
-msgstr "Impressora local"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Contrasenya de 'root'"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Sense contrasenya"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Aquesta contrasenya és massa senzilla (ha de tenir com a mínim %d caràcters)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Autenticació"
-
-#: ../../install_steps_interactive.pm_.c:949
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autenticació"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:951
-#, fuzzy
-msgid "LDAP Server"
-msgstr "Servidor"
-
-#: ../../install_steps_interactive.pm_.c:957
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "NIS d'autenticació"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "Domini del NIS"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Un disc d'arrencada personalitzat proporciona una manera d'arrencar el "
-"vostre\n"
-"sistema Linux sense dependre del carregador d'arrencada normal. Això és "
-"útil\n"
-"si no voleu instal·lar el SILO al sistema, o si un altre sistema operatiu\n"
-"elimina el SILO, o si el SILO no funciona amb la vostra configuració de\n"
-"maquinari. Un disc d'arrencada personalitzat també es pot utilitzar amb la\n"
-"imatge de rescat del Mandrake, facilitant molt la recuperació de fallides\n"
-"serioses del sistema.\n"
-"\n"
-"Si voleu crear un disc d'arrencada per al vostre sistema, inseriu un disquet "
-"a la primera unitat i premeu \"D'acord\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Primera unitat de disquet"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Segona unitat de disquet"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Omet"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Un disc d'arrencada personalitzat proporciona una manera d'arrencar el "
-"vostre\n"
-"sistema Linux sense dependre del carregador d'arrencada normal. Això és "
-"útil\n"
-"si no voleu instal·lar el LILO (o el grub) al sistema, o si un altre sistema "
-"operatiu\n"
-"elimina el LILO, o si el LILO no funciona amb la vostra configuració de\n"
-"maquinari. Un disc d'arrencada personalitzat també es pot utilitzar amb la\n"
-"imatge de rescat del Mandrake, facilitant molt la recuperació de fallides\n"
-"serioses del sistema. Voleu crear un disc d'arrencada per al vostre sistema?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "No hi ha cap unitat de disquet disponible"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Escolliu la unitat de disquet que voleu utilitzar per crear el disc "
-"d'arrencada"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Inseriu un disquet a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "S'està creant el disc d'arrencada"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "S'està preparant el carregador d'arrencada"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Voleu utilitzar l'aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"S'ha produït un error en instal·lar l'aboot; \n"
-"voleu intentar igualment la instal·lació encara que això destrueixi la "
-"primera partició?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Instal·la el LILO"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Ha fallat la instal·lació del carregador d'arrencada. S'ha produït l'error "
-"següent:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Potser us caldrà canviar el dispositiu d'arrencada Open Firware per\n"
-" habilitar el carregador d'arencada. Si no veieu l'indicador del\n"
-" carregador d'arrencada en tornar a arrencar, premeu Command-Option-O-F\n"
-" en tornar a arrencar i introduïu:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Després, escriviu: shut-down\n"
-"En l'arrencada següent heu de veure l'indicador del carregador d'arrencada."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Baix"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Mitjà"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Alt"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Escolliu el nivell de seguretat"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Inseriu un disquet en blanc a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "S'està creant el diquet d'instal·lació automàtica"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Alguns passos no s'han completat.\n"
-"\n"
-"Segur que voleu sortir ara?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Felicitats! La instal·lació ha acabat.\n"
-"Traieu el suport d'arrencada i premeu Intro per tornar a arrencar.\n"
-"\n"
-"Trobareu la solució als problemes coneguts d'aquesta versió del\n"
-"Mandrake Linux a la fe d'errates que hi ha a http://www.linux-mandrake."
-"com/.\n"
-"\n"
-"La informació sobre com configurar el vostre sistema està disponible a\n"
-"l'últim capítol d'instal·lació de la Guia Oficial de l'Usuari del\n"
-"Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Genera un disquet per a la instal·lació automàtica"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Si es desitja, la instal·lació automàtica es pot\n"
-"automatitzar completament, però en aquest cas\n"
-"prendrà el control del disc dur!!\n"
-"(això està pensat per a la instal·lació en una altra caixa).\n"
-"\n"
-"Potser preferireu repetir la instal·lació.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automàtica"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Repeteix"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Desa la selecció de paquets"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instal·lació del Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> entre elements  | <Espai> selecciona | <F12> pant. següent"
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "El kdesu no hi és"
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "Trieu una acció"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Avançat"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Si us plau, espereu"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Expandeix l'arbre"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Redueix l'arbre"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Commuta entre pla i ordenat per grups"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Ambigüitat (%s), sigueu més precís\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Elecció incorrecta, torneu-ho a intentar\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (predeterminat %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "La vostra elecció? (predeterminat %s)"
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "La vostra elecció? (predeterminat %s  introduïu `cap' per a cap) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Txec (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Alemany"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Espanyol"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Finès"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Francès"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Noruec"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Polonès"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Rus"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Suec"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Teclat RU"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "Teclat EU"
-
-#: ../../keyboard.pm_.c:159
-#, fuzzy
-msgid "Albanian"
-msgstr "Iranià"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armeni (antic)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armeni (màquina d'escriure)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armeni (fonètic)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjanès (llatí)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Búlgar"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiler (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Bielorús"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Suís (disposició alemanya)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Suís (disposició francesa)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Txec (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Alemany (sense tecles inoperatives)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Danès"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (EU)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noruec)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estonià"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgià (disposició \"russa\")"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgià (disposició \"llatina\")"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Grec"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Hongarès"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Israelià"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Israelià (fonètic)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iranià"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islandès"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Italià"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japonès de 106 tecles"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Teclat coreà"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Espanyol sud-americà"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituà AZERTY (antic)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituà AZERTY (nou)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituà \"fila de números\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituà \"fonètic\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "Ubicació"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Macedoni"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Holandès"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Polonès (disposició qwerty)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Polonès (disposició qwertz)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portuguès"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Canadenc (Quebec)"
-
-#: ../../keyboard.pm_.c:217
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Rus (Yawerty)"
-
-#: ../../keyboard.pm_.c:218
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Rus (Yawerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Rus (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Eslovè"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovac (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovac (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaidjanès (ciríl·lic)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Teclat tai"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Teclat tai"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turc (tradicional, model \"F\")"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turc (modern, model \"Q\")"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ucraïnès"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "Teclat EU (internacional)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"fila numèrica\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Iugoslau (llatí/ciríl·lic)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Muntatges circulars %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Elimineu primer els volums lògics\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Estàndard"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Rató de bola PS2 genèric"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 botó"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "General"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "De bola"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "sèrie"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Generic 2 Button Mouse"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Generic 3 Button Mouse"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (sèrie, tipus C7 antic)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 botons"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 botons"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "cap"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Cap ratolí"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Si us plau, comproveu el ratolí."
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Per activar el ratolí,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVEU LA BOLA!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Finès"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Següent ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Això és correcte?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Connecta't a internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"La manera més habitual de connectar amb ADSL és pppoe.\n"
-"Algunes connexions utilitzen pptp, unes poques utilitzen dhcp.\n"
-"Si no ho sabeu, escolliu 'utilitza pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "utilitza dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "utilitza pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "utilitza pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Quin client dhcp voleu utilitzar?\n"
-"El predeterminat és dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"No s'ha detectat cap adaptador de xarxa ethernet al sistema.\n"
-"No puc configurar aquest tipus de connexió."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Escolliu la interfície de xarxa"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Si us plau, seleccioneu quin adaptador de xarxa voleu utilitzar per\n"
-"connectar-vos a Internet."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "no s'ha trobat cap targeta de xarxa"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "S'està configurant la xarxa"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Si us plau, introduïu el nom del vostre ordinador central, si el sabeu.\n"
-"Alguns servidors DHCP necessiten que aquest nom funcioni.\n"
-"El nom ha de ser complet,\n"
-"com ara ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Nom de l'ordinador central"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Assistent de configuració de xarxa"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Mòdem XDSI extern"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Targeta XDSI interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Quin tipus de connexió XDSI teniu?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "S'ha detectat la configuració del sistema de tallafocs!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "S'ha detectat la configuració del sistema de tallafocs!"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "Configuració de l'XDSI"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Seleccioneu el vostre proveïdor.\n"
-" Si no és a la llista, seleccioneu No és a la llista"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protocol d'arrencada"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Resta del món"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Resta del món \n"
-" cap canal D (línies llogades)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Quin protocol voleu utilitzar?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Quin tipus de targeta teniu?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "No sé"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Si teniu una targeta ISA, els valors de la pantalla següent han de ser "
-"correctes.\n"
-"\n"
-"Si teniu una targeta PCMCIA, us en cal saber l'irq i l'io.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Interromp"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Continua"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Quina targeta XDSI teniu ?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"He detectat una targeta PCI XDSI, però no en conec el tipus. Si us plau, "
-"seleccioneu una targeta PCI a la pantalla següent."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"No s'ha trobat cap targeta PCI XDSI. Si us plau, seleccioneu-ne una a la "
-"pantalla següent"
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-"Si us plau, seleccioneu el port sèrie al qual teniu connectat el mòdem."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Opcions de marcatge"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Nom de la connexió"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Número de telèfon"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "ID d'entrada"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Basat en script"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Basat en terminal"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Nom de domini"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Primer servidor DNS (opcional)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Segon servidor DNS (opcional)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Podeu desconnectar-vos o tornar a configurar la connexió."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Podeu tornar a configurar la connexió."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Ara mateix esteu connectat a Internet."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Podeu connectar-vos a Internet o tornar a configurar la connexió."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Ara mateix no esteu connectat a Internet."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Connecta't a Internet"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Desconnecta't d'Internet"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Configura la connexió de xarxa (LAN o Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Connexió i configuració d'Internet"
-
-#: ../../network/netconnect.pm_.c:96
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Podeu desconnectar-vos o tornar a configurar la connexió."
-
-#: ../../network/netconnect.pm_.c:105
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Podeu desconnectar-vos o tornar a configurar la connexió."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Configuració de xarxa"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Atès que esteu realitzant una instal·lació de xarxa, ja teniu la xarxa "
-"configurada.\n"
-"Feu clic a D'acord per conservar la configuració, o a Cancel·la per tornar a "
-"configurar la connexió a Internet i xarxa.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Benvingut a l'Auxiliar de configuració a xarxa\n"
-"\n"
-"Ara configurarem la connexió a Internet/xarxa.\n"
-"Si no voleu utilitzar la detecció automàtica, desactiveu el quadre de "
-"verificació.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Escolliu el perfil per configurar"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Utilitza la detecció automàtica"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "S'estan detectant els dispositius..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Connexió normal per mòdem"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "detectat al port %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "Connexió XDSI"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "s'ha detectat %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Connexió LAN"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "detectat a la interfície %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Connexió de cable"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Connexió de cable"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "Connexió LAN"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "s'han detectat una o diverses targetes Ethernet"
-
-#: ../../network/netconnect.pm_.c:190
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Escolliu l'eina que voleu utilitzar "
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:215
-#, fuzzy
-msgid "Internet connection"
-msgstr "Connexió a Internet compartida"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Voleu iniciar la connexió en arrencar?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Configuració de xarxa"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"S'ha produït un problema en reiniciar la xarxa: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Felicitats, la configuració de xarxa i Internet ha finalitzat.\n"
-"\n"
-"Ara s'aplicarà la configuració al sistema.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Després d'això, és recomanable que reinicieu l'entorn X per\n"
-"evitar problemes deguts al canvi de nom de l'ordinador central."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ATENCIÓ: Aquest dispositiu ja es va configurar per connectar-se a Internet.\n"
-"Només cal que accepteu mantenir-lo configurat.\n"
-"Si modifiqueu els camps inferiors, sobreescriureu aquesta configuració."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Si us plau, introduïu la configuració IP d'aquest ordinador.\n"
-"S'ha d'introduir cada element com a una adreça IP amb notació decimal amb\n"
-"punts (per exemple, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "S'està configurant el dispositiu de xarxa %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (programa de control %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "Adreça IP"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Submàscara de la xarxa"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "IP automàtic"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "L'adreça IP ha d'estar amb el format 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Si us plau, introduïu el nom del vostre ordinador central.\n"
-"Aquest nom ha de ser complet, com ara\n"
-"``mybox.mylab.myco.com''.\n"
-"També podeu introduir l'adreça IP de la passarel·la, si en teniu una"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "servidor DNS"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Passarel·la"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Dispositiu de la passarel·la"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Configuració dels proxys"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "El proxy ha de ser http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "El proxy ha de ser ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Configuració d'Internet"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Voleu intentar connectar-vos a Internet ara?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "S'està comprovant la vostra conexió..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Ara, el sistema està connectat a Internet."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Per raons de seguretat, ara es desconnectarà."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"No sembla que el sistema estigui connectat a Internet.\n"
-"Intenteu tornar a configurar la connexió."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Configuració de la connexió"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Si us plau, ompliu o marqueu el camp inferior"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "Targeta IRQ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Targeta de memòria (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "Targeta d'E/S"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "Targeta d'E/S_0"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "Targeta d'E/S_1"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "El vostre telèfon particular"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Nom del proveïdor (p.ex. proveidor.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Número de telèfon del proveïdor"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 del proveïdor (opcional)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 del proveïdor (opcional)"
-
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "Escolliu el vostre teclat"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Mode de marcatge"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-#, fuzzy
-msgid "Connection speed"
-msgstr "Tipus de connexió: "
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Tipus de connexió: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Entrada del compte (nom d'usuari)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Contrasenya del compte"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Aquesta plataforma no suporta particions esteses"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Hi ha un forat a la vostra taula de particions, però no puc utilitzar-lo.\n"
-"L'única solució és moure les particions primàries per fer que el forat quedi "
-"contigu a les particions ampliades"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Ha fallat la restauració del fitxer %s: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Fitxer de còpia de seguretat incorrecte"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "S'ha produït un error en escriure al fitxer %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Alguna cosa no va bé en la vostra unitat. \n"
-"Ha fallat una comprovació de la integritat de les dades. \n"
-"Això vol dir que qualsevol cosa que s'escrigui al disc acabarà feta malbé"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ha de tenir"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "important"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "molt bonic"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bonic"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "potser"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Impressora local"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Impressora remota"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Servidor CUPS remot"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Servidor lpd remot"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Impressora de xarxa (sòcol)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Servidor de la impressora"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Dispositiu URI d'impressora"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(mòdul %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Seleccioneu la connexió de la impressora"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Com està connectada la impressora?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"Amb un servidor CUPS remot, aquí no us cal configurar cap\n"
-"impressora; les impressores es detectaran automàticament.\n"
-"En cas de dubte, seleccioneu \"Servidor CUPS remot\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Cap"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Escolliu l'usuari per omissió:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Tanca"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "L'adreça IP ha d'estar amb el format 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "El número de port ha de ser numèric"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "IP del servidor CUPS"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Configuració del tipus d'arrencada"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "S'estan detectant els dispositius..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Ports de comprovació"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "S'ha detectat una impressora, model \"%s\", a"
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Dispositiu de la impressora local"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"A quin dispositiu està connectada la vostra impressora?\n"
-"(tingueu en compte que /dev/lp0 equival a LPT1:)\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Dispositiu d'impressora"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "S'està llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Opcions de la impressora lpd remota"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Per poder utilitzar una cua d'impressió lpd remota, necessiteu proporcionar\n"
-"el nom de l'ordinador central del servidor de la impressora i el nom de la\n"
-"cua d'aquest servidor on s'hi han de situar les tasques."
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nom de l'ordinador central remot"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:320
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Nom de l'ordinador central remot"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nom de l'ordinador central remot"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcions de la impressora SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Per poder imprimir a una impressora SMB, heu d'indicar el nom de\n"
-"l'ordinador central SMB (tingueu en compte que pot ser diferent del seu nom\n"
-"TCP/IP) i possiblement l'adreça IP del servidor d'impressió, així com el "
-"nom\n"
-"de compartició de la impressora a què voleu accedir i el nom d'usuari,\n"
-"contrasenya i informació de grup si són necessaris."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "Ordinador central del servidor SMB"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "IP del servidor SMB"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Nom de compartició"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Grup de treball"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "Opcions de la impressora NetWare"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Per poder imprimir a una impressora NetWare, heu de proporcionar el nom del\n"
-"servidor d'impressió NetWare (tingueu en compte que pot ser diferent del "
-"nom\n"
-"TCP/IP del seu ordinador central), així com el nom de la cua d'impressió de\n"
-"la impressora a què voleu accedir i el nom d'usuari i contrasenya si són\n"
-"necessaris."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Servidor de la impressora"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Nom de la cua d'impressió"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Opcions de la impressora de sòcol"
-
-#: ../../printerdrake.pm_.c:528
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Per imprimir a una impressora de sòcol, heu d'indicar el nom de l'ordinador\n"
-"central de la impressora i, opcionalment, el número de port."
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "Nom de l'ordinador central de la impressora"
-
-#: ../../printerdrake.pm_.c:537
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Nom de l'ordinador central de la impressora"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Dispositiu URI d'impressora"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Nom de la impressora"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Descripció"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Ubicació"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "S'està llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:793
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Connexió de la impressora"
-
-#: ../../printerdrake.pm_.c:794
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Quin tipus d'impressora teniu?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Configuració del mòdem"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Configuració d'Internet"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Voleu comprovar la impressió?"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "Ports de comprovació"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-#, fuzzy
-msgid "No test pages"
-msgstr "Sí, imprimeix ambdues pàgines de prova"
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "Impressora"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "Eines estàndard"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "S'esta(n) imprimint la(es) pàgina(es) de prova... "
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "S'esta(n) imprimint la(es) pàgina(es) de prova... "
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "S'esta(n) imprimint la(es) pàgina(es) de prova... "
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"La(es) pàgina(es) de prova s'ha(n) enviat al procés d'impressió.\n"
-"Degut a això, pot passar un cert temps abans no comenci la impressió.\n"
-"Estat de la impressió:\n"
-"%s\n"
-"\n"
-"Funciona correctament?"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"La(es) pàgina(es) de prova s'ha(n) enviat al procés d'impressió.\n"
-"Degut a això, pot passar un cert temps abans no comenci la impressió.\n"
-"Funciona correctament?"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Cap impressora"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "S'està desactivant la xarxa"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "Opcions de la impressora"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "S'està llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Configuració d'Internet"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"El nom de la impressora només pot constar de lletres, números i el caràcter "
-"de subratllat"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "Cap impressora"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "S'està llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Configura la impressora"
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "S'està comprovant la vostra conexió..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Configura la xarxa"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "El monitor no està configurat"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "S'està configurant la xarxa"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Quin sistema d'impressió voleu utilitzar?"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Alt"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoic"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Quin sistema d'impressió voleu utilitzar?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Seleccioneu la connexió de la impressora"
-
-#: ../../printerdrake.pm_.c:1728
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Quin sistema d'impressió voleu utilitzar?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configura la impressora"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Opcions de la impressora"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "S'està llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:1845
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Voleu configurar una impressora?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Mode normal"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Predeterminat)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Servidor CUPS remot"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "Servidor CUPS remot"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-#, fuzzy
-msgid "Add printer"
-msgstr "Cap impressora"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Voleu comprovar la configuració?"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Configuració del mòdem"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Connexió a Internet compartida"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Connexió de la impressora"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "S'esta(n) imprimint la(es) pàgina(es) de prova... "
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "S'està llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Voleu reiniciar la xarxa"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "S'està llegint la base de dades de controladors CUPS..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Configuració dels proxys"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Port"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "El proxy ha de ser http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "El número de port ha de ser numèric"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "El proxy ha de ser ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Entrada automàtica"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Contrasenya"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Sense contrasenya"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Les contrasenyes no coincideixen"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "No es pot afegir una partició a un RAID _formatat_ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "No es pot escriure al fitxer %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "l'mkraid ha fallit"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "l'mkraid ha fallit (potser manquen eines del RAID?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "No hi ha prou particions per al nivell RAID %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, un programador d'ordres periòdiques."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"L'apmd s'utilitza per monitoritzar l'estat de la bateria i registrar-lo "
-"mitjançant el registre del sistema.\n"
-"També es pot utilitzar per apagar l'ordinador quan queda poca bateria."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Executa les ordres programades per l'ordre 'at' a l'hora que es va\n"
-"especificar en executar 'at', i executa les ordres 'batch' quan la\n"
-"mitjana de càrrega és prou baixa."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"El cron és un programa UNIX estàndard que executa programes determinats\n"
-"per l'usuari en hores programades. El vixie cron afegeix un cert nombre de\n"
-"característiques al cron bàsic, incloent seguretat millorada i opcions\n"
-"de configuració més potents."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"El GPM afegeix suport de ratolí a aplicacions Linux basades en text, com ara "
-"el Midnight Commander. També permet operacions de tallar i enganxar amb el "
-"ratolí, i inclou suport de menús desplegables a la consola."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"L'Apache és un servidor de World Wide Web. S'utilitza per servir fitxers\n"
-"HTML i CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"El procés superservidor d'Internet (conegut normalment com 'inetd') inicia\n"
-"altres serveis d'Internet a mesura que es van necessitant. És el "
-"responsable\n"
-"d'iniciar molts serveis, incloent el telnet, l'ftp, l'rsh i l'rlogin. Si\n"
-"s'inhabilita l'inetd s'inhabiliten tots els serveis de què és responsable."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Aquest paquet carrega el mapa de teclat seleccionat segons s'ha definit\n"
-"a /etc/sysconfig/keyboard. Això es pot seleccionar mitjançant la utilitat\n"
-"kbdconfig.\n"
-"Per a la majoria d'ordinadors, s'ha de deixar habilitat."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"L'lpd és el procés d'impressió necessari per a que l'lpr funcioni\n"
-"correctament. Bàsicament, es tracta d'un servidor que assigna les\n"
-"tasques d'impressió a la(es) impressora(es)."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) és un servidor de noms de domini (DNS) que s'utiilitza\n"
-"per convertir noms d'ordinadors centrals en adreces IP."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Munta i desmunta tots els punts de muntatge dels sistemes de fitxers\n"
-"de xarxa (NFS), SMB (gestor de xarxes d'àrea local/Windows) i NCP (NetWare)."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/Desactiva totes les interfícies de xarxa configurades per\n"
-"iniciar-se durant l'arrencada."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"L'NFS és un popular protocol de compartició de fitxers en xarxes TCP/IP.\n"
-"Aquest servei proporciona la funcionalitat del servidor NFS, que es\n"
-"configura mitjançant el fitxer /etc/exports."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"L'NFS és un popular protocol de compartició de fitxers en xarxes TCP/IP\n"
-"Aquest servei proporciona la funcionalitat de blocatge del fitxer NFS."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"El suport PCMCIA serveix normalment per suportar coses com ara l'ethernet\n"
-"i els mòdems en portàtils. No s'iniciarà tret que es configuri, de manera\n"
-"que no hi ha problema per instal·lar-lo en ordinadors que no el necessiten."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"El portmapper gestiona les connexions RPC, que són utilitzades per\n"
-"protocols com ara l'NFS i l'NIS. El servidor portmap s'ha d'estar\n"
-"executant en ordinadors que actuen com a servidors per a protocols que\n"
-"utilitzen el mecanisme RPC."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"El Postfix és un agent de transport de correu, que és el programa que\n"
-"passa el correu d'un ordinador a un altre."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Desa i recupera el generador d'entropia del sistema per a\n"
-"la generació de nombres aleatoris d'una més alta qualitat."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"El procés 'routed' permet que la taula d'encaminadors IP automàtics\n"
-"s'actualitzi mitjançant el protocol RIP. Mentre que el RIP s'utilitza\n"
-"àmpliament en xarxes petites, les xarxes complexes necessiten protocols\n"
-"d'encaminament més complexs."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"El protocol rstat permet que els usuaris d'una xarxa recuperin\n"
-"mètrics de funcionament de qualsevol ordinador de la mateixa."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"El protocol rusers permet que els usuaris d'una xarxa identifiquin\n"
-"qui està connectat en altres ordinadors de la mateixa."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"El protocol rwho permet que els usuaris remots obtinguin una llista\n"
-"de tots els usuaris que están connectats a un ordinador que està\n"
-"executant el procés rwho (similar al finger)."
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Executa el sistema X-Window en iniciar"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"El syslog és el sistema que utilitzen molts processos per registrar\n"
-"missatges en diversos fitxers de registre del sistema. És aconsellable\n"
-"executar-lo sempre."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:88
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Inicia i atura l'X Font Server en arrencar i apagar l'ordinador."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Escolliu els serveis que s'han d'iniciar automàticament durant l'arrencada"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "Impressora"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "Mode de sistema"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Opcions de la impressora lpd remota"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Servidor, base de dades"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "dispositiu"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "s'està executant"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "aturat"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Serveis i dimonis"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Malauradament no hi ha més informació\n"
-"sobre aquest servei."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "En arrencar"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "S'està instal·lant el paquet %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"No puc llegir la vostra taula de particions, està massa malmesa per a mi :(\n"
-"Intentaré seguir buidant les particions incorrectes"
-
-#: ../../standalone/drakautoinst_.c:44
-#, fuzzy
-msgid "Error!"
-msgstr "Error"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Publica la configuració de la instal·lació "
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Configuració del tipus d'arrencada"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Felicitats!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Connexió a Internet compartida"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "La connexió a Internet compartida està habilitada"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuració de la connexió compartida a Internet ja s'ha dut a terme.\n"
-"Ara està habilitada.\n"
-"\n"
-"Què voleu fer?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "inhabilita"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "deixa-ho córrer"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "torna a configurar"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "S'estan inhabilitant els servidors..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Ara, la compartició de la connexió a Internet està inhabilitada."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "La connexió a Internet compartida està inhabilitada"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuració de la connexió compartida a Internet ja s'ha dut a terme.\n"
-"Ara està inhabilitada.\n"
-"\n"
-"Què voleu fer?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "habilita"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "S'estan habilitant els servidors..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Ara, la connexió compartida a Internet està habilitada."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Ara configurareu l'ordinador per tal que comparteixi la connexió a "
-"Internet.\n"
-"Amb aquesta característica, altres ordinadors de la vostra xarxa local\n"
-"podran utilitzar la connexió a Internet d'aquest ordinador.\n"
-"\n"
-"Nota: per configurar una xarxa d'àrea local (LAN), us cal un adaptador de "
-"xarxa dedicat."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfície %s (utilitzant el mòdul %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Interfície %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "No teniu cap adaptador de xarxa al sistema!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"No s'ha detectat cap adaptador de xarxa ethernet al sistema. Si us plau, "
-"executeu l'eina de configuració de maquinari."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Interfície de la xarxa"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Només teniu un adaptador de xarxa configurat al sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Ara configuraré la vostra xarxa d'àrea local amb aquest adaptador."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Si us plau, escolliu l'adaptador de xarxa que es connectarà\n"
-"a la vostra xarxa d'àrea local."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Compte, l'adaptador de xarxa ja està configurat. El tornaré a configurar."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"S'ha trobat un conflicte potencial d'adreça LAN en la configuració actual de "
-"%s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "S'ha detectat la configuració del sistema de tallafocs!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Atenció! S'ha detectat una configuració existent del sistema de tallafocs. "
-"Potser us caldrà fer algun ajustament manual després de la instal·lació."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "S'està configurant..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"S'estan configurant les seqüències, instal·lant el programari, iniciant els "
-"servidors..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Hi ha hagut problemes en instal·lar el paquet %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Ja està tot configurat.\n"
-"Ara podeu compartir la connexió a Internet amb altres ordinadors de la "
-"vostra xarxa d'àrea local utilitzant la configuració automàtica de xarxa "
-"(DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "La configuració ja s'ha realitzat, però ara està inhabilitada."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "La configuració ja s'ha realitzat i ara està habilitada."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "No s'ha configurat mai cap connexió compartida a Internet."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Configuració de la compartició de la connexió a Internet"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Benvingut a la utilitat de compartició de la connexió a Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Feu clic a Configura per executar l'auxiliar de configuració."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuració de xarxa (%d adaptadors)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Perfil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Suprimeix el perfil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Perfil a suprimir:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Perfil nou..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Nom de l'ordinador central: "
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Accés a Internet"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Tipus:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Passarel·la:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Intefície:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Estat:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Connectat"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Sense connexió"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Connecta..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Desconnecta..."
-
-#: ../../standalone/draknet_.c:215
-#, fuzzy
-msgid "Starting your connection..."
-msgstr "S'està comprovant la vostra conexió..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "S'està tancant la connexió..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"La connexió no està tancada.\n"
-"Intenteu fer-ho manualment executant\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"a root."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Ara, el sistema està desconnectat."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Configura l'accés a Internet..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "Configuració de la LAN"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Programa de control"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Interfície"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protocol"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "State"
-msgstr "Estat:"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Configura la xarxa d'àrea local..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Aplica"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Si us plau, espereu... s'està aplicant la configuració"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "Configuració de la LAN"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Protocol d'arrencada"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Iniciat en l'arrencada"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "activate now"
-msgstr "Actiu"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "desactivate now"
-msgstr "Actiu"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Configuració de la connexió a Internet"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Configuració de la connexió a Internet"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Tipus de connexió: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Paràmetres"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Targeta Ethernet"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Benvinguts, crackers"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Pobre"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoic"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Aquest nivell s'ha d'utilitzar amb cura. Fa el vostre sistema molt més "
-"fàcil\n"
-"d'utilitzar, però també molt sensible: no s'ha d'utilitzar en un ordinador\n"
-"connectat a d'altres o a Internet. No s'hi accedeix mitjançant contrasenya."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Ara, la contrasenya està habilitada, però l'ús com a ordinador de xarxa "
-"segueix sense ser recomanable."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Poques millores per a aquest nivell de seguretat; la principal és que hi ha\n"
-"més avisos i comprovacions de seguretat."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Aquesta és la seguretat estàndard recomanada per a un ordinador que\n"
-"s'utilitzarà per connectar-se a Internet com a client. Ara hi ha "
-"comprovacions de seguretat."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Amb aquest nivell de seguretat, la utilització d'aquest sistema com a\n"
-"servidor esdevé possible.\n"
-"La seguretat és ara prou alta com per utilitzar el sistema com a servidor\n"
-"que accepti connexions de molts clients. "
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Assumim les característiques del nivell 4, però ara el sistema està\n"
-"totalment tancat.\n"
-"Les característiques de seguretat estan al màxim."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "S'està establint el nivell de seguretat"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Escolliu les opcions per al servidor"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "S'està establint el nivell de seguretat"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Control Center"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Escolliu l'eina que voleu utilitzar "
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "sintaxi: keyboarddrake [--expert] [teclat]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Voleu que la tecla Enrere efectuï un Suprimeix en la consola?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Canvieu el CD-ROM"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Si us plau, inseriu el CD-ROM d'instal·lació a la unitat i després\n"
-"premeu D'acord.\n"
-"Si no el teniu, premeu Cancel·la per evitar la instal·lació en directe."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "No es pot iniciar l'actualització en directe !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "no s'ha trobat cap serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Voleu emular el tercer botó?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Configuració del sistema de tallafocs"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Configuració del sistema de tallafocs"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Sistema de tallafocs\n"
-"\n"
-"Ja heu configurat un tallafocs.\n"
-"Feu clic a Configura per canviar o eliminar el tallafoc"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Sistema de tallafocs\n"
-"\n"
-"Feu clic a Configura per configurar un tallafocs estàndard"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Escolliu el vostre idioma"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Tipus d'instal·lació"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detecció del disc dur"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configura el ratolí"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Escolliu el vostre teclat"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Seguretat"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Sistemes de fitxers"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formata les particions"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Paquets a instal·lar"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instal·la el sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Afegeix un usuari"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configura la xarxa"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configura els serveis"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Crea un disc d'arrencada"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Instal·la el LILO"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configura l'X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Surt de la instal·lació"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Configurador del tinyfirewall\n"
-"\n"
-"Amb això es configura un tallafocs personal per a aquest ordinador Linux "
-"Mandrake.\n"
-"Per a una potent solució de tallafocs dedicada, consulteu si us plau la "
-"distribució especialitzada MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Ara us farem preguntes sobre els serveis a què voleu autoritzar que\n"
-"Internet us connecti. Si us plau, penseu-hi a fons perquè la seguretat\n"
-"del vostre ordinador és important.\n"
-"\n"
-"Si us plau, si un moment donat no esteu utilitzant algun d'aquests serveis,\n"
-"desactiveu-ne el tallafocs. Podeu canviar aquesta configuració sempre que\n"
-"vulgueu tornant a executar aquesta aplicació!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Esteu executant un servidor de web en aquest ordinador que necessiteu que\n"
-"pugui veure tothom a Internet? Si esteu executant un servidor de web a què\n"
-"només ha d'accedir aquest ordinador, aquí podeu respondre tranquil·lament "
-"NO.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Esteu executant un servidor de noms en aquest ordinador? Si no n'heu\n"
-"configurat cap per proporcionar la IP i la informació de zona a tothom a\n"
-"Internet, si us plau responeu NO.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Voleu autoritzar les connexions Secure Shell (ssh) d'entrada? Es tracta\n"
-"d'una substitució del Telnet que podeu utilitzar per entrar. Si ara esteu\n"
-"utilitzant el Telnet, passeu-vos a l'ssh sense cap mena de dubte; el\n"
-"Telnet no està xifrat, de manera que us poden robar la contrasenya si\n"
-"l'utilitzeu, mentre que l'ssh està xifrat i no permet cap mena d'intercepció."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Voleu autoritzar les connexions Telnet d'entrada?\n"
-"Això és tremendament insegur, com hem dit a la pantalla anterior. Us\n"
-"recomanem vivament que respongueu No aquí i que utilitzeu l'ssh en comptes\n"
-"del Telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Esteu executant un servidor d'FTP que necessiteu que sigui accessible a\n"
-"Internet? Si és així, us recomanen vivament que només l'utilitzeu per a\n"
-"transferències anònimes, ja que qualsevol contrasenya que s'envia per FTP\n"
-"pot ser robada, atès que l'FTP no utilitza xifratge per a la transferència\n"
-"de contrasenyes.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Esteu executant un servidor de correu? Si esteu enviant els missatges\n"
-"a través del pine, el mutt o qualsevol altre client de correu basat en\n"
-"text, probablement és així. En cas contrari, desactiveu-ne el tallafocs.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Esteu executant un servidor POP o IMAP? Això s'utilitzaria\n"
-"per allotjar comptes de correu dels usuaris, no basats en web,\n"
-"mitjançant aquest ordinador.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Sembla que esteu utilitzant un nucli 2.2. Si l'ordinador de\n"
-"casa o de l'oficina estableix automàticament la IP de la vostra\n"
-"xarxa (assignació dinàmica), us cal autoritzar això. És aquest el cas?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"El vostre ordinador està sincronitzat pel que fa al temps amb un altre?\n"
-"Normalment, això ho utilitzen organitzacions Unix/Linux mitjanes-grans\n"
-"per sincronitzar el temps de les entrades i coses així. Si no sou una part\n"
-"d'una oficina gran i no heu sentit parlar d'això, probablement no us trobeu\n"
-"en aquest cas."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"La configuració està completa. Podem desar aquests canvis al disc?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "No es pot obrir %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "No s'ha pogut obrir %s per escriure-hi: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Servidor, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Ordinador de xarxa (client)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Servidor NFS, Servidor SMB, Servidor intermediari, Servidor SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Oficina"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Estació de treball GNOME"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Eines per al Palm Pilot o per al Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Estació de treball"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Servidor, Tallafoc/Encaminador"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programes d'ofimàtica: processadors de textos (kword, abiword), gestors de "
-"fulls de càlcul (kspread, gnumeric), visualitzadors pdf, etc."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Eines d'àudio: reproductors d'mp3 o midi, mescladors, etc."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Llibres i Com es fa... sobre el Linux i el programari lliure"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Estació de treball KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimèdia - Vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Conjunt d'eines per al correu, notícies, web, transferència de fitxers i xat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Servidor, base de dades"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Eines per facilitar la configuració de l'ordinador"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimèdia - So"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilitats"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentació"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Eines de consola"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Estació d'Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Estació multimèdia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Configuració de la LAN"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Més escriptoris gràfics (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "Entorn d'escriptori K, l'entorn gràfic bàsic que inclou diverses eines"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Entorn gràfic"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Desenvolupament"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache i Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Eines per crear i gravar CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Estació de treball Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programes gràfics com ara el Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Biblioteques de desenvolupament C i C++, programes i fitxers inclosos"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Servidor d'ordinador de xarxa"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Servidor, Correu/Groupware/Notícies"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Estació de jocs"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Reproductors i editors de vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimèdia - Gràfics"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programes d'entreteniment: acció, jocs de taula, estratègia, etc."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Conjunt d'eines per llegir i enviar correu i notícies (pine, mutt, tin...) i "
-"per navegar pel Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arxivament, emuladors, monitorització"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Comptabilitat personal"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Entorn gràfic amb un conjunt d'aplicacions i eines d'escriptori fàcil "
-"d'utilitzar"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clients per a diferents protocols, incloent l'ssh"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Accés a Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programes de reproducció/edició de so i vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Altres escriptoris gràfics"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editors, intèrprets d'ordres, eines de fitxer, terminals"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programes per gestionar els vostres comptes, com ara el gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Jocs"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Gestió d'informació personal"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimèdia - Gravació de CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Estació científica de treball"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "no es pot obrir /etc/sysconfig/autologin per a lectura: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Voleu reiniciar la xarxa"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Hi esteu d'acord?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Ara reiniciaré el dispositiu de xarxa:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Ara reiniciaré el dispositiu de xarxa %s. Hi esteu d'acord?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Tret que sapigueu expressament que s'ha d'indicar una altra cosa, "
-#~ "l'elecció\n"
-#~ "habitual és \"/dev/hda\" (el disc IDE mestre primari) o bé \"/dev/sda\"\n"
-#~ "(el primer disc SCSI)."
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Aquestes són les cues d'impressió següents.\n"
-#~ "Podeu afegir-ne algunes més o canviar-ne les existents."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Tipus de connexió: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Escolliu l'usuari per omissió:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Si us plau, comproveu el ratolí."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "Escolliu l'idioma que voleu utilitzar per a la instal·lació i per a l'ús "
-#~ "del sistema."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Heu d'acceptar els termes de la llicència de més amunt per poder "
-#~ "continuar la instal·lació.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si us plau, feu clic a \"Accepto\" si hi esteu d'acord.\n"
-#~ "\n"
-#~ "\n"
-#~ "Feu clic a \"No accpeto\" si no hi esteu d'acord. La instal·lació "
-#~ "finalitzarà sense modificar la instal·lació actual."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Escolliu el vostre tipus de teclat de la llista inferior"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Si desitgeu que altres idiomes (a més del que vau triar en\n"
-#~ "iniciar la instal·lació) estiguin disponibles després de la "
-#~ "instal·lació,\n"
-#~ "escolliu-los de la llista de més amunt. Si els voleu seleccionar tots,\n"
-#~ "només cal que seleccioneu \"Tots\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Seleccioneu:\n"
-#~ "\n"
-#~ "  - Personalitzada: Si esteu familiaritzat amb el Linux, podreu\n"
-#~ "triar l'ús del sistema instal·lat entre Normal, Desenvolupament o\n"
-#~ "Servidor. Trieu \"Normal\" per a una instal·lació per a un ús\n"
-#~ "general del vostre ordinador, \"Desenvolupament\" si utilitzareu\n"
-#~ "l'ordinador principalment per a desenvolupament de programari,\n"
-#~ "o \"Servidor\" si voleu instal·lar un servidor convencional (per\n"
-#~ "a correu, impressions...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Per a experts: Si domineu el GNU/Linux i voleu realitzar una\n"
-#~ "instal·lació totalment personalitzada, aquest és el vostre\n"
-#~ "tipus d'instal·lació. Podreu seleccionar l'ús del vostre sistema\n"
-#~ "com a \"Personalitzada\"."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Ara heu de decidir com utilitzareu l'ordinador. Les opcions són:\n"
-#~ "\n"
-#~ "* Estació de treball: l'elecció ideal si penseu utilitzar l'ordinador "
-#~ "bàsicament per a l'ús quotidià, a la feina o\n"
-#~ "  a casa.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Desenvolupament: si penseu utilitzar l'ordinador bàsicament per a "
-#~ "desenvolupament de programari, aquesta és l'elecció ideal.\n"
-#~ "  Tindreu instal·lada una completa col·lecció de programari per poder "
-#~ "compilar, depurar i formatar codi font,\n"
-#~ "  o crear paquets de programari.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Servidor: si penseu utilitzar l'ordinador com a servidor, aquesta és "
-#~ "l'elecció ideal, ja sigui un servidor de fitxers (NFS o\n"
-#~ "  SMB), un servidor d'impressió (tipus Unix o Microsoft Windows), un "
-#~ "servidor d'autenticació (NIS), un servidor\n"
-#~ "  de bases de dades, etc. En canvi, no espereu que se us instal·lin coses "
-#~ "com ara el KDE, el GNOME, etc.)"
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Ara podeu seleccionar el grup de paquets que voleu instal·lar o "
-#~ "actualitzar.\n"
-#~ "\n"
-#~ "\n"
-#~ "El DrakX comprovarà si teniu prou espai per instal·lar-los tots i, si no, "
-#~ "us\n"
-#~ "ho avisarà. Si voleu seguir igualment, continuarà amb la instal·lació de "
-#~ "tots\n"
-#~ "els grups seleccionats però no n'instal·larà alguns de menys interès. Al "
-#~ "final\n"
-#~ "de la llista podeu seleccionar l'opció \"Selecció individual de paquets"
-#~ "\", i\n"
-#~ "en aquest cas haureu de navegar per més de 1.000 paquets..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Ara podeu triar individualment tots els paquets que voleu instal·lar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Podeu expandir o reduir l'arbre fent clic a les opcions del racó esquerre "
-#~ "de la finestra de paquets.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si preferiu veure els paquets ordenats alfabèticament, feu clic a la "
-#~ "icona\n"
-#~ "\"Commuta entre ordenació plana i per grups\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no voleu ser avisat pel que fa a les dependències, feu clic a "
-#~ "\"Dependències\n"
-#~ "automàtiques\". Si ho feu, tingueu en compte que el fet de "
-#~ "desseleccionar\n"
-#~ "un paquet pot causar la desselecció d'altres paquets que en depenen, i "
-#~ "no\n"
-#~ "us n'assabentareu."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Si teniu tots els CD de la llista superior, feu clic a D'acord.\n"
-#~ "Si no teniu cap d'aquests CD, feu clic a Cancel·la.\n"
-#~ "Si només falten alguns CD, desseleccioneu-los i feu clic a D'acord."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Si voleu connectar l'ordinador a Internet o a una xarxa local, "
-#~ "seleccioneu\n"
-#~ "l'opció corresponent, però abans recordeu engegar el dispositiu per tal "
-#~ "que\n"
-#~ "el DrakX el detecti automàticament.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no teniu connexió a Internet ni a cap xarxa local, escolliu "
-#~ "\"Inhabilita el servei de xarxa\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu configurar la xarxa més endavant, després de la instal·lació, o "
-#~ "si\n"
-#~ "heu acabat la configuració de la connexió de xarxa, trieu \"Fet\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "No s'ha detectat cap mòdem. Si us plau, seleccioneu el port sèrie on està "
-#~ "connectat.\n"
-#~ "\n"
-#~ "\n"
-#~ "Per a la vostra informació, el primer port sèrie (anomenat \"COM1\" en "
-#~ "Microsoft Windows) s'anomena \"ttyS0\" en Linux."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Ara podeu introduir les opcions de marcatge. Si no sabeu què heu "
-#~ "d'introduir,\n"
-#~ "o si no n'esteu segur, podreu aconseguir la informació necessària del "
-#~ "vostre\n"
-#~ "proveïdor d'Internet. Si no introduïu aquí la informació del DNS "
-#~ "(servidor de\n"
-#~ "noms), aquesta informació s'obtindrà del proveïdor en el moment de "
-#~ "connectar."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Si el mòdem que teniu és extern, engegueu-lo per tal que el DrakX el "
-#~ "detecti automàticament."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Si us plau, engegueu el mòdem i trieu-ne el correcte."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Si no esteu segur de si la informació de més amunt és correcta, si no "
-#~ "sabeu\n"
-#~ "què introduir o si no n'esteu segur, podreu aconseguir la informació\n"
-#~ "necessària del vostre proveïdor d'Internet. Si no introduïu aquí la\n"
-#~ "informació del DNS (servidor de noms), aquesta informació s'obtindrà del\n"
-#~ "proveïdor en el moment de connectar."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Ara podeu introduir el nom del vostre ordinador central. Si no esteu "
-#~ "segur del que hi\n"
-#~ "heu d'introduir, el vostre proveïdor us en donarà la informació correcta."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Ara podeu configurar el voste dispositiu de xarxa.\n"
-#~ "\n"
-#~ "   * Adreça IP: si no la sabeu, o no n'esteu segur, pregunteu-la a "
-#~ "l'administrador de la xarxa.\n"
-#~ "     No heu d'introduir cap adreça IP si més avall seleccioneu l'opció "
-#~ "\"IP automàtica\".\n"
-#~ "\n"
-#~ "  * Màscara de la xarxa: Normalment, \"255.255.255.0\" és una bona "
-#~ "elecció. Si no n'esteu segur, consulteu-ho a l'administrador de la "
-#~ "xarxa.\n"
-#~ "\n"
-#~ "  * IP automàtica: si la vostra xarxa utilitza els protocols BOOTP o "
-#~ "DHCP,\n"
-#~ "seleccioneu aquesta opció. Si es selecciona, no cal cap valor per a "
-#~ "\"Adreça IP\". Si no n'esteu segur, consulteu-ho a l'administrador de la "
-#~ "xarxa."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Ara podeu introduir el nom del vostre ordinador central, si cal. Si no "
-#~ "el\n"
-#~ "sabeu, o no esteu segur de què heu d'introduir, consulteu a "
-#~ "l'administrador de la xarxa."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Ara podeu introduir el nom del vostre ordinador central, si cal. Si no\n"
-#~ "el sabeu, o si esteu segur de què introduir, deixeu-ho en blanc."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Ara podeu introduir les opcions de marcatge. Si no esteu segur del que "
-#~ "hi\n"
-#~ "heu d'introduir, el vostre proveïdor us en donarà la informació correcta."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Si teniu previst utilitzar proxys, configureu-los ara. Si no sabeu si\n"
-#~ "n'utilitzareu, consulteu-ho a l'administrador de la xarxa o al vostre\n"
-#~ "proveïdor."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Podeu instal·lar el paquet criptogràfic si la vostra connexió a Internet\n"
-#~ "s'ha configurat correctament. Escolliu primer una rèpilca des de la qual\n"
-#~ "vulgueu descarregar paquets i després seleccioneu els paquets a "
-#~ "instal·lar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tingueu en compte que heu de seleccionar la rèplica i els paquets\n"
-#~ "criptogràfics segons la vostra legislació."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Ara podeu seleccionar la zona horària segons el lloc on viviu."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Podeu configurar una impressora local (connectada al vostre ordinador) o\n"
-#~ "remota (accessible mitjançant una xarxa Unix, Netware o Microsoft "
-#~ "Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Si voleu imprimir, trieu un sistema de impressió entre CUPS i LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "El CUPS és un nou sistema d'impressió, potent i flexible, per a sistemes "
-#~ "Unix\n"
-#~ "(CUPS significa \"Common Unix Printing System\"). És el sistema "
-#~ "d'impressió\n"
-#~ "per defecte en Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "L'LPR és l'antic sistema d'impressió utilitzat en distribucions anteriors "
-#~ "de\n"
-#~ "Mandrake Linux distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no teniu impressora, feu clic a \"Cap\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "El GNU/Linux pot treballar amb molts tipus d'impressores, però cada un\n"
-#~ "d'aquests tipus requereix una configuració diferent.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si teniu la impressora connectada físicament a l'ordinador, seleccioneu\n"
-#~ "\"Impressora local\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu accedir a una impressora que es troba en un ordinador Unix "
-#~ "remot,\n"
-#~ "seleccioneu \"Impressora remota\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu accedir a una impressora que es troba en un ordinador Microsoft\n"
-#~ "Windows remot (o en un ordinador Unix que utilitza el protocol SMB),\n"
-#~ "seleccioneu \"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Si us plau, engegueu la impressora abans de continuar per tal que el "
-#~ "DrakX\n"
-#~ "la pugui detectar.\n"
-#~ "\n"
-#~ "Aquí heu d'introduir algunes dades.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nom de la impressora: l'spool d'impressió utilitza \"lp\" com a nom "
-#~ "per\n"
-#~ "omissió de la impressora. Per tant, heu de tenir una impressora "
-#~ "anomenada\n"
-#~ "\"lp\".\n"
-#~ "     Si només teniu una impressora, podeu donar-li diversos;\n"
-#~ "noms; només cal que els separeu amb el caràcter \"|\". Per tant,\n"
-#~ "si preferiu un nom més expressiu, l'heu d'indicar en primer lloc\n"
-#~ "(per exemple: \"La meva impressora|lp\").\n"
-#~ "     La impressora que contingui \"lp\" al(s) nom(s) serà la impressora "
-#~ "per omissió.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Descripció: és opcional, però pot ser útil si teniu diverses\n"
-#~ "impressores connectades a l'ordinador o si permeteu que altres\n"
-#~ "ordinadors accedeixin a aquesta impressora.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Ubicació: si voleu incloure informació sobre la ubicació de la\n"
-#~ "impressora, feu-ho aquí (podeu escriure el que vulgueu, (per exemple,\n"
-#~ "\"2n pis\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Aquí heu d'introduir algunes dades.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nom de la cua: l'spool d'impressió utilitza \"lp\" com a nom per\n"
-#~ "omissió de la impressora. Per tant, heu de tenir una impressora "
-#~ "anomenada\n"
-#~ "\"lp\".\n"
-#~ "     Si només teniu una impressora, podeu donar-li diversos;\n"
-#~ "noms; només cal que els separeu amb el caràcter \"|\". Per tant,\n"
-#~ "si preferiu un nom més expressiu, l'heu d'indicar en primer lloc\n"
-#~ "(per exemple: \"La meva impressora|lp\").\n"
-#~ "     La impressora que contingui \"lp\" al(s) nom(s) serà la impressora "
-#~ "per omissió.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Directori d'spool: les tasques d'impressió s'emmagatzemen en aquest "
-#~ "directori.Conserveu la opció predeterminada si no sabeu quina utilitzar\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     Si voleu accedir a una impressora que es troba en un ordinador Unix\n"
-#~ "remot, seleccioneu \"Impressora lpd remota\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Si voleu accedir a una impressora que es troba en un ordinador\n"
-#~ "Microsoft Windows remot (o en un ordinador Unix que utilitza el protocol\n"
-#~ "SMB), seleccioneu \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "     Si voleu accedir a una impressora que es troba en una xarxa "
-#~ "NetWare,\n"
-#~ "seleccioneu \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "No s'ha detectat la vostra impressora. Si us plau, introduïu el nom del\n"
-#~ "dispositiu a què està connectada.\n"
-#~ "\n"
-#~ "\n"
-#~ "Per a la vostra informació, la majoria d'impressores estan connectades "
-#~ "al\n"
-#~ "primer port paral·lel, que s'anomena  \"/dev/lp0\" en GNU/Linux i \"LPT1"
-#~ "\"\n"
-#~ "en Microsoft Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Ara heu de seleccionar la vostra impressora a la llista superior."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Si us plau, seleccioneu les opcions correctes segons la vostra "
-#~ "impressora;\n"
-#~ "consulteu-ne la documentació si no sabeu què heu de seleccionar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Podreu comprovar la configuració en el pas següent i modificar-la si no\n"
-#~ "funciona exactament com voleu."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Ara podeu introduir la contrasenya de l'usuari 'root' del vostre\n"
-#~ "sistema Mandrake Linux. Ho heu de fer dos cops per verificar que\n"
-#~ "ambdues introduccions són idèntiques.\n"
-#~ "\n"
-#~ "\n"
-#~ "L'usuari 'root' és l'administrador del sistema, i és l'únic\n"
-#~ "autoritzat per modificar la configuració del sistema; per tant,\n"
-#~ "trieu amb molta cura aquesta contrasenya. L'ús no autoritzat del\n"
-#~ "compte 'root' pot ser extremadament perillós per a la integritat\n"
-#~ "del sistema, per a les seves dades, i per a altres sistema que hi\n"
-#~ "estan connectats.\n"
-#~ "\n"
-#~ "\n"
-#~ "La contrasenya s'ha de crear amb diversos caràcters alfanumèrics, ha de\n"
-#~ "tenir una llargada mínima de 8 caràcters, i mai no s'ha d'anotar enlloc.\n"
-#~ "\n"
-#~ "\n"
-#~ "No obstant això, no creeu una contrasenya excessivament llarga o\n"
-#~ "complicada: heu de poder recordar-la sense problemes."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Ara podeu crear un o més comptes \"normals\" d'usuari, en\n"
-#~ "contraposició al compte \"privilegiat\", el 'root'. Podeu crear\n"
-#~ "un o més comptes per a cada una de les persones a qui permetreu\n"
-#~ "utilitzar l'ordinador. Tingueu en compte que cada compte d'usuari\n"
-#~ "tindrà les seves pròpies preferències (entorn gràfic, paràmetres\n"
-#~ "del programa. etc.) i el seu propi \"directori inicial\", on\n"
-#~ "s'emmagatzemen aquestes preferències.\n"
-#~ "\n"
-#~ "\n"
-#~ "Primer de tot, creeu-vos un compte propi! Encara que sigueu l'únic\n"
-#~ "usuari de l'ordinador, NO us connecteu com a 'root'\n"
-#~ "per a l'ús quotidià del sistema: és un risc de seguretat molt alt.\n"
-#~ "Tot sovint, fer el sistema inutilitzable depèn d'un simple error\n"
-#~ "tipogràfic.\n"
-#~ "\n"
-#~ "\n"
-#~ "Per tant, connecteu-vos al sistema amb el compte d'usuari que heu\n"
-#~ "creat, i entreu-hi com a 'root' només per a tasques d'administració\n"
-#~ "i manteniment."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "És molt recomanable crear un disc d'arrencada. Si no podeu arrencar "
-#~ "l'ordinador,\n"
-#~ "és l'única manera de solucionar-ho sense haver de reinstal·lar-ho tot."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Les opcions principals del LILO i del Grub són:\n"
-#~ "  - Dispositiu d'arrencada: Defineix el nom del dispositiu (p.\n"
-#~ "ex., una partició del disc dur) que conté el sector d'arrencada.\n"
-#~ "Tret que sapigueu expressament que s'ha d'indicar una altra cosa,\n"
-#~ "trieu \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Temps d'espera abans d'arrencar la imatge per defecte: Especifica el\n"
-#~ "temps, en dècimes de segon, que el carregador d'arrencada ha\n"
-#~ "d'esperar abans de carregar la primera imatge.\n"
-#~ "Això és útil en sistemes que arrenquen immediatament des del disc\n"
-#~ "dur després d'habilitar el teclat. El carregador d'arrencada no\n"
-#~ "esperarà si s'omet el \"temps d'espera\" o si se li dóna el valor zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Mode de vídeo: Amb això s'especifica el mode de text VGA que\n"
-#~ "cal seleccionar en arrencar. Es poden utilitzar els valors\n"
-#~ "següents:\n"
-#~ "    * normal: selecciona el mode de text 80x25 normal.\n"
-#~ "    * <número>: utilitza el mode de text corresponent.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Neteja de \"/tmp\" en cada arrencada: si voleu suprimir tots els "
-#~ "fitxers i\n"
-#~ "directoris emmagatzemats a \"/tmp\" en arrencar el sistame, seleccioneu\n"
-#~ "aquesta opció.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Si cal, indicació de la mida exacta de la RAM: malauradament, no hi "
-#~ "cap\n"
-#~ "mètode estàndard per preguntar al BIOS la quantitat de RAM que teniu a\n"
-#~ "l'ordinador. Per tant, és possible que el Linux no pugui detectar\n"
-#~ "correctament la quantitat de RAM instal·lada. Si és aquest el cas, en "
-#~ "podeu\n"
-#~ "indicar aquí la quantitat correcta, però penseu que una diferència de 2 o "
-#~ "4\n"
-#~ "MB entre la memòria detectada i la memòria real és normal."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "El SILO és un carregador d'arrencada per a l'SPARC: pot arrencar el\n"
-#~ "GNU/Linux o qualsevol altre sistema operatiu que tingueu a l'ordinador.\n"
-#~ "Normalment, aquests altres sistemes operatius es detecten i instal·len\n"
-#~ "correctament, però si no és així, podeu afegir-los manualment en aquesta\n"
-#~ "pantalla. Aneu amb compte de triar els paràmetres correctes.\n"
-#~ "\n"
-#~ "\n"
-#~ "També és possible que no volgueu donar accés a tothom a aquests sistemes\n"
-#~ "operatius; en aquest cas podeu suprimir les entrades corresponents, però\n"
-#~ "aleshores us caldrà un disc d'arrencada per poder-los arrencar!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Les opcions principals del SILO són:\n"
-#~ "  - Instal·lació del carregador d'arrencada: indica on voleu situar la\n"
-#~ "informació necessària per arrencar el GNU/Linux. Tret que sapigueu\n"
-#~ "exactament què esteu fent, seleccioneu \"Primer sector de la unitat\n"
-#~ "(MBR)\".\n"
-#~ " \n"
-#~ "\n"
-#~ "  - Temps d'espera abans d'arrencar la imatge per defecte: Especifica el\n"
-#~ "temps, en dècimes de segon, que el carregador d'arrencada ha\n"
-#~ "d'esperar abans de carregar la primera imatge.\n"
-#~ "Això és útil en sistemes que arrenquen immediatament des del disc\n"
-#~ "dur després d'habilitar el teclat. El carregador d'arrencada no\n"
-#~ "esperarà si s'omet el \"temps d'espera\" o si se li dóna el valor zero."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Ara cal configurar el sistema X Window, que és el nucli del GUI\n"
-#~ "(Interfície gràfica d'usuari) del GNU/Linux. Per a això, heu de\n"
-#~ "configurar la vostra targeta gràfica i el monitor. No obstant\n"
-#~ "això, la majoria d'aquests passos estan automatitzats, així que pot\n"
-#~ "ser que la vostra feina es limiti a verificar què s'ha fet i a\n"
-#~ "acceptar els paràmetres :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Quan la configuració hagi acabat s'iniciarà X (tret que demaneu al\n"
-#~ "Drakx que no ho faci), i podreu verificar si els paràmetres us\n"
-#~ "convenen. Si no, podreu tornar enrere i canviar-los tantes vegades\n"
-#~ "com calgui."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Si hi ha algun problema a la configuració X, utilitzeu aquestes opcions\n"
-#~ "per configurar correctament l'X Window System."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Si preferiu utilitzar una entrada gràfica, seleccioneu \"Sí\". En cas\n"
-#~ "contrari, seleccioneu \"No\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Podeu triar un nivell de seguretat per al vostre sistema. Si us plau,\n"
-#~ "consulteu el manual per obtenir informació completa. Bàsicament, si no\n"
-#~ "sabeu què triar, conserveu l'opció per defecte.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Ara, el sistema es tornarà a arrencar.\n"
-#~ "\n"
-#~ "Després d'això, el sistema Mandrake Linux es carregarà\n"
-#~ "automàticament. Si voleu arrencar un altre sistema operatiu existent,\n"
-#~ "llegiu les instruccions addicionals."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Txec (Programadors)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Eslovac (Programadors)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Nom del perfil a crear:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Escriu a /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "Restaura des del fitxer"
-
-#~ msgid "Save in file"
-#~ msgstr "Desa al fitxer"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Restaura des del disquet"
-
-#~ msgid "Format all"
-#~ msgstr "Formata-ho tot"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Després de formatar totes les particions,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "totes les dades d'aquestes particions s'hauran perdut"
-
-#~ msgid "Reload"
-#~ msgstr "Torna a carregar"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Voleu generar un disquet d'instal·lació automàtica per fer còpies del "
-#~ "Linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Configuració de l'ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Amb un servidor CUPS remot, aquí no us cal configurar cap\n"
-#~ "impressora; les impressores es detectaran automàticament,\n"
-#~ "tret que tingueu un servidor en una altra xarxa; en aquest\n"
-#~ "cas, heu d'indicar l'adreça IP, i opcionalment el número de\n"
-#~ "port, al servidor CUPS."
-
-#~ msgid "Remote queue"
-#~ msgstr "Cua remota"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Cua remota"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Nom de domini"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Cap impressora"
-
-#, fuzzy
-#~ msgid "start it"
-#~ msgstr "limita"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Monitorització de la xarxa"
-
-#~ msgid "Profile "
-#~ msgstr "Perfil "
-
-#~ msgid "Statistics"
-#~ msgstr "Estadístiques"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "S'està enviant la velocitat: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "S'està rebent la velocitat: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Tipus de connexió: "
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "S'està establint la connexió a Internet"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "S'està realitzant la desconnexió d'Internet"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "No s'ha pogut realitzar la desconnexió d'Internet"
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "La desconnexió d'Internet ha finalitzat"
-
-#~ msgid "Connection complete."
-#~ msgstr "La connexió ha finalitzat."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "No s'ha pogut establir la connexió.\n"
-#~ "Comproveu la configuració al Centre de control de Mandrake."
-
-#, fuzzy
-#~ msgid "Color configuration"
-#~ msgstr "Configuració"
-
-#~ msgid "sent: "
-#~ msgstr "enviat: "
-
-#~ msgid "received: "
-#~ msgstr "rebut: "
-
-#, fuzzy
-#~ msgid "average"
-#~ msgstr "escombraries"
-
-#~ msgid "Connect"
-#~ msgstr "Connecta"
-
-#~ msgid "Disconnect"
-#~ msgstr "Desconnecta"
-
-#~ msgid "/File/_New"
-#~ msgstr "/Fitxer/_Nou"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>N"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/Fitxer/_Obre"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>O"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/Fitxer/_Desa"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/Fitxer/_Anomena i desa"
-
-#~ msgid "/File/-"
-#~ msgstr "/Fitxer/-"
-
-#~ msgid "/_Options"
-#~ msgstr "/_Opcions"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/Opcions/Prova"
-
-#~ msgid "/_Help"
-#~ msgstr "/_Ajuda"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/Ajuda/_Quant a..."
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Predeterminat"
-
-#~ msgid "Europe"
-#~ msgstr "Europa"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "Elimina la cua"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "No s'ha pogut interpretar el contingut del fitxer de configuració."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Fitxer de configuració no reconegut"
-
-#~ msgid "Adapter"
-#~ msgstr "Adaptador"
-
-#~ msgid "Disable network"
-#~ msgstr "Inhabilita el sistema de xarxa"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Inhabilita el sistema de xarxa"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Ara podeu provar el ratolí. Utilitzeu els botons i la bola per comprovar "
-#~ "que\n"
-#~ "els paràmetres són correctes; si no ho són, feu clic a \"Cancel·la\" per\n"
-#~ "seleccionar un altre controlador."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Connexió per DSL (o ADSL)"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Tanca"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Podeu indicar directament l'URI per accedir a la impressora amb CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Sí, imprimeix una pàgina ASCII de prova"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Sí, imprimeix una pàgina PostScript de prova"
-
-#~ msgid "Paper Size"
-#~ msgstr "Mida del paper"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Voleu expulsar la pàgina després de la tasca?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Opcions del programa de control Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Opcions de profunditat del color"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Voleu imprimir el text com a PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Voleu ajustar el text 'stair-stepping'?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Nombre de pàgines per pàgines de sortida"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Marges dret/esquerra en punts (1/72 de polzada)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Marges superior/inferior en punts (1/72 de polzada)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "opcions addicionals del GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Opcions addicionals per al text"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Inverteix l'ordre de les pàgines"
-
-#~ msgid "CUPS starting"
-#~ msgstr "S'està iniciant el CUPS"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Seleccioneu la connexió de la impressora remota"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Cada impressora necessita un nom (p.ex. lp).\n"
-#~ "Es poden definir altres paràmetres, com ara la descripció de la "
-#~ "impressora\n"
-#~ "o la seva ubicació. Quin nom cal utilitzar per a aquesta impressora, i "
-#~ "com\n"
-#~ "està connectada?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Cada cua d'impressió (a què s'adrecen les tasques d'impressió) necessita\n"
-#~ "un nom (sovint lp) i un directori d'spool associada amb ell. Quin nom i\n"
-#~ "directori cal utilitzar per a aquesta cua, i com està connectada la "
-#~ "impressora?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nom de la cua"
-
-#~ msgid "Spool directory"
-#~ msgstr "Directori d'spool"
-
-#~ msgid "Disable"
-#~ msgstr "Inhabilita"
-
-#~ msgid "Enable"
-#~ msgstr "Habilita"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Per habilitar un sistema més segur, seleccioneu \"Utilitza el\n"
-#~ "fitxer d'ombra\" i \"Utilitza les contrasenyes MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Si la vostra xarxa utilitza NIS, seleccioneu \"Utilitza NIS\". Si no ho\n"
-#~ "sabeu, consulteu a l'administrador de la xarxa."
-
-#~ msgid "yellow pages"
-#~ msgstr "pàgines grogues"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Configuració de la LAN"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1 del proveïdor"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2 del proveïdor"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Com us voleu connectar a Internet?"
-
-#~ msgid "cannot fork: "
-#~ msgstr "no es pot bifurcar: "
-
-#~ msgid "Configure..."
-#~ msgstr "Configura..."
-
-#, fuzzy
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "Configuració de la LAN"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "S'ha seleccionat la mida %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "S'està obrint la connexió..."
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Aquest script d'inici intenta carregar els mòduls del ratolí USB."
-
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Configuració del LILO/Grub"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Configuració del tipus d'arrencada"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Ara que ja teniu configurada la connexió a Internet,\n"
-#~ "podeu configurar l'ordinador per tal que la comparteixi.\n"
-#~ "Nota: per configurar una xarxa d'àrea local (LAN), us cal un adaptador de "
-#~ "xarxa dedicat.\n"
-#~ "\n"
-#~ "Voleu configurar la connexió a Internet compartida?\n"
-
-#~ msgid "Welcome to the Internet Connection Sharing utility!"
-#~ msgstr "Benvingut a la utilitat de compartició de la connexió a Internet!"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Dependències automàtiques"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Configura el LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Crea un disquet d'arrencada"
-
-#~ msgid "Format floppy"
-#~ msgstr "Formata el disquet"
-
-#~ msgid "Choice"
-#~ msgstr "Elecció"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "aurora horitzontal amb bon aspecte"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "aurora vertical tradicional"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Ara podeu seleccionar diverses opcions per al vostre sistema.\n"
-#~ "\n"
-#~ "* Utilització de l'optimització del disc dur: Aquesta opció pot millorar "
-#~ "el\n"
-#~ "rendiment del disc dur, però és només per a usuaris avançats. Alguns "
-#~ "xips\n"
-#~ "amb errors poden fer malbé les vostres dades, així que aneu amb compte. "
-#~ "El\n"
-#~ "nucli inclou una \"llista negra\" d'unitats i jocs de xips, però, si "
-#~ "voleu\n"
-#~ "evitar-vos sorpreses desagradables, no activeu aquesta opció.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Selecció d'un nivell de seguretat: Podeu escollir un nivell de\n"
-#~ "seguretat per al sistema. Si us plau, consulteu el manual per a més\n"
-#~ "informació. Bàsicament, si no n'esteu segur, trieu l'opció "
-#~ "predeterminada.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Si cal, indicació de la mida exacta de la RAM: malauradament, no hi "
-#~ "cap\n"
-#~ "mètode estàndard per preguntar al BIOS la quantitat de RAM que hi ha a\n"
-#~ "l'ordinador. Per tant, és possible que el Linux no pugui detectar\n"
-#~ "correctament la quantitat de RAM instal·lada. Si és aquest el cas, en "
-#~ "podeu\n"
-#~ "indicar aquí la quantitat correcta, però penseu que una diferència de 2 o "
-#~ "4\n"
-#~ "MB entre la memòria detectada i la memòria real és normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Muntatge automàtic de suports extraïbles: Si preferiu no haver\n"
-#~ "de muntar manualment les unitats extraïbles (CD-ROM, disquet, Zip)\n"
-#~ "escrivint \"mount\" i \"umount\", seleccioneu aquesta opció.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Neteja de \"/tmp\" en cada arrencada: si voleu suprimir tots els "
-#~ "fitxers\n"
-#~ "i directoris que hi ha emmagatzemats a \"/tmp\" quan arranqueu el "
-#~ "sistema,\n"
-#~ "seleccioneu aquesta opció.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Habilitació de BlocNum a l'inici: Si voleu que BlocNum s'habiliti "
-#~ "després\n"
-#~ "de l'arrencada, seleccioneu aquesta opció. Tingueu en compte que no heu\n"
-#~ "d'habilitar aquesta opció en portàtils i que BlocNum pot funcionar o pot "
-#~ "no\n"
-#~ "funcionar sota X."
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "Si us plau, tingueu paciència; la configuració del correu encara no està "
-#~ "implementada."
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "Benvingut a l'Auxiliar de configuració de la xarxa.\n"
-#~ "Quins components voleu configurar?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Accés a Internet/xarxa"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Miscel·lània"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Preguntes diverses"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "No es pot utilitzar supermount en un nivell d'alta seguretat"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Atenció: EN AQUEST NIVELL DE SEGURETAT NO ES POT ENTRAR COM A ROOT A LA "
-#~ "CONSOLA!\n"
-#~ "Si voleu ser root, heu d'entrar com a usuari i aleshores utilitzar \"su"
-#~ "\".\n"
-#~ "En general, no espereu utilitzar l'ordinador per a altre cosa que com a "
-#~ "servidor.\n"
-#~ "Esteu avisat."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Aneu amb compte; si teniu BlocNúm habilitat, moltes tecles donaran\n"
-#~ "números en comptes de lletres (p.ex., si premeu la `p' obtindreu un `6')"
-
-#~ msgid "not connected"
-#~ msgstr "sense connexió"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Aplicacions científiques"
-
-#~ msgid "toot"
-#~ msgstr "toot"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Servidor, Fitxer/Impressió/Samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Servidor, DNS/DHCP "
-
-#~ msgid "First DNS Server"
-#~ msgstr "Servidor DNS primari"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Servidor DNS secundari"
-
-#~ msgid "using module"
-#~ msgstr "s'està utilitzant el mòdul"
-
-#~ msgid "Development, Database"
-#~ msgstr "Desenvolupament, base de dades"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Desenvolupament, entorn integrat"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Desenvolupament, eines estàndard"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "Avís:\n"
-#~ "Si apliquu els canvis durant l'execució, és possible que l'entorn X "
-#~ "caigui."
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "Si continueu, tancaré l'entorn %s"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Quin(s) carregador(s) d'arrencada voleu utilitzar?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Disquet d'instal·lació automàtica"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Voleu que intenti trobar un mòdem?"
-
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "Configura una connexió per XDSI"
-
-#~ msgid "Configure a cable connection"
-#~ msgstr "Configura una connexió per cable"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Inhabilita la connexió a Internet"
-
-#~ msgid "Configure local network"
-#~ msgstr "Configura la xarxa local"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Configura la connexió a Internet / Configura la xarxa local"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "La xarxa local ja s'ha configurat.\n"
-#~ "Voleu:"
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Manipulació de gràfics"
-
-#~ msgid "Multimedia"
-#~ msgstr "Multimèdia"
-
-#~ msgid "Sciences"
-#~ msgstr "Ciències"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Programes de xat (IRC o missatgeria instantània) com ara xchat, licq, "
-#~ "gaim, i eines de transferència de fitxers"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Instal·lacions de comunicació"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Eines d'Internet"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Clients de bases de dades i servidors (mysql i postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Desenvolupament C/C++"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Zona horària"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(pot malmetre les dades)"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "Voleu utilitzar l'optimització del disc dur?"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Habilita la tecla Bloc Num en iniciar"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Confirmeu la contrasenya"
-
-#~ msgid "default"
-#~ msgstr "predeterminat"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Amb quina finalitat utilitzeu el sistema?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Seleccioneu la mida que voleu instal·lar"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Utilitza el diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "Personalitzada"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Esteu segur que sou un expert? \n"
-#~ "Aquí podreu fer coses molt potents, però també perilloses.\n"
-#~ "\n"
-#~ "Us preguntaran coses com: ``Voleu utilitzar un fitxer d'ombres per a les "
-#~ "contrasenyes?'',\n"
-#~ "Sou capaç de respondre aquest tipus de preguntes?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Utilitza el fitxer d'ombra"
-
-#~ msgid "shadow"
-#~ msgstr "ombra"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Utilitza les contrasenyes MD5"
-
-#~ msgid "Search"
-#~ msgstr "Cerca"
-
-#~ msgid "Package"
-#~ msgstr "Paquet"
-
-#~ msgid "Text"
-#~ msgstr "Text"
-
-#~ msgid "Tree"
-#~ msgstr "Arbre"
-
-#~ msgid "Sort by"
-#~ msgstr "Ordena per"
-
-#~ msgid "Category"
-#~ msgstr "Categoria"
-
-#~ msgid "See"
-#~ msgstr "Consulteu"
-
-#~ msgid "Installed packages"
-#~ msgstr "Paquets instal·lats"
-
-#~ msgid "Available packages"
-#~ msgstr "Paquets disponibles"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Mostra només les fulles"
-
-#~ msgid "Expand all"
-#~ msgstr "Expandeix-ho tot"
-
-#~ msgid "Collapse all"
-#~ msgstr "Redueix-ho tot"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Afegeix la ubicació dels paquets"
-
-#~ msgid "Update location"
-#~ msgstr "Actualitza la ubicació"
-
-#~ msgid "Find Package"
-#~ msgstr "Cerca el paquet"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Cerca el paquet que conté el fitxer"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Commuta entre Instal·lats i Disponibles"
-
-#~ msgid "Choose package to install"
-#~ msgstr "Escolliu el paquet a instal·lar"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "S'estan comprovant les dependències"
-
-#~ msgid "Wait"
-#~ msgstr "Espera"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Ara es desinstal·laran els paquets següents"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "S'estan desinstal·lant els RPM"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Quin paquet esteu cercant"
-
-#~ msgid "%s not found"
-#~ msgstr "no s'ha trobat %s"
-
-#~ msgid "No match"
-#~ msgstr "Cap coincidència"
-
-#~ msgid "No more match"
-#~ msgstr "Cap altra coincidència"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "Actualment, l'rpmdrake està en el mode ``poca memòria''.\n"
-#~ "Ara tornaré a reiniciar l'rpmdrake per permetre la recerca de fitxers"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Quin fitxer esteu cercant?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Què esteu cercant?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Introduïu un nom (p.ex. `extra', `comercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Directori"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "No hi ha cap CD-ROM disponible (no hi ha res a /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "L'URL del directori que conté els RPM"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Per a FTP i HTTP, us cal introduir la ubicació de hdlist\n"
-#~ "Ha de ser relativa a l'URL superior"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Si us plau, trameteu la informació següent"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s ja és en ús"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "S'està actualitzant la base dels RPM"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Ara s'eliminarà l'entrada %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "S'estan cercant les fulles"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Cal una mica de temps per cercar les fulles"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "He trobat una targeta XDSI:\n"
-
-#~ msgid "France"
-#~ msgstr "França"
-
-#~ msgid "Other countries"
-#~ msgstr "Altres països"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "A quin país us trobeu?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Mòdem Alcatel"
-
-#~ msgid "ECI modem"
-#~ msgstr "Mòdem ECI"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "Si el vostre mòdem adsl és un mòdem Alcatel, seleccioneu Alcatel. Si no, "
-#~ "ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "no utilitzis pppoe"
-
-#~ msgid "mandatory"
-#~ msgstr "obligatori"
-
-#~ msgid "interesting"
-#~ msgstr "interessant"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (important)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (molt bonic)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (bonic)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "A quin port sèrie està connectat el vostre ratolí?"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, biblioteques, eines"
-
-#~ msgid "Czech"
-#~ msgstr "Txec"
-
-#~ msgid "Slovakian"
-#~ msgstr "Eslovac"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "No s'ha pogut instal·lar el RPM d'ipchains amb l'urpmi."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "No s'ha pogut instal·lar el RPM de dhcp amb l'urpmi."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "No s'ha pogut instal·lar el RPM de linuxconf amb l'urpmi."
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "No s'ha pogut instal·lar el RPM de bind amb l'urpmi."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "No s'ha pogut instal·lar el RPM de caching-nameserver amb l'urpmi"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Torna a configurar la xarxa local"
-
-#~ msgid ""
-#~ " Introduction\n"
-#~ "\n"
-#~ "The operating system and the different components available in the "
-#~ "Mandrake Linux distribution \n"
-#~ "shall be called the \"Software Products\" hereafter. The Software "
-#~ "Products include, but are not \n"
-#~ "restricted to, the set of programs, methods, rules and documentation "
-#~ "related to the operating \n"
-#~ "system and the different components of the Mandrake Linux distribution.\n"
-#~ "\n"
-#~ "\n"
-#~ "1. License Agreement\n"
-#~ "\n"
-#~ "Please read carefully this document. This document is a license agreement "
-#~ "between you and  \n"
-#~ "MandrakeSoft S.A., 43, rue d'Aboukir, 75002 Paris - France, which applies "
-#~ "to the Software Products.\n"
-#~ "By installing, duplicating or using the Software Products in any manner, "
-#~ "you explicitly \n"
-#~ "accept and fully agree to conform to the terms and conditions of this "
-#~ "License. \n"
-#~ "If you disagree with any portion of the License, you are not allowed to "
-#~ "install, duplicate or use \n"
-#~ "the Software Products. \n"
-#~ "Any attempt to install, duplicate or use the Software Products in a "
-#~ "manner which does not comply \n"
-#~ "with the terms and conditions of this License is void and will terminate "
-#~ "your rights under this \n"
-#~ "License. Upon termination of the License,  you must immediately destroy "
-#~ "all copies of the \n"
-#~ "Software Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "2. The GPL License and Related Licenses\n"
-#~ "\n"
-#~ "The Software Products consist of components created by different persons "
-#~ "or entities.  Most \n"
-#~ "of these components are governed under the terms and conditions of the "
-#~ "GNU General Public \n"
-#~ "Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-#~ "licenses allow you to use, \n"
-#~ "duplicate, adapt or redistribute the components which they cover. Please "
-#~ "read carefully the terms \n"
-#~ "and conditions of the license agreement for each component before using "
-#~ "any component. Any question \n"
-#~ "on a component license should be addressed to the component author and "
-#~ "not to MandrakeSoft.\n"
-#~ "The programs developed by MandrakeSoft S.A. are governed by the GPL "
-#~ "License. Documentation written \n"
-#~ "by MandrakeSoft S.A. is governed by a specific license. Please refer to "
-#~ "the documentation for \n"
-#~ "further details.\n"
-#~ "Some versions of the Software Products may contain components which are "
-#~ "not governed by the GPL \n"
-#~ "License or similar agreements. Each such component is then governed by "
-#~ "the terms and conditions \n"
-#~ "of its own specific license. Please read carefully and comply with such "
-#~ "specific licenses before \n"
-#~ "you install, use or redistribute the said components. Such licenses will "
-#~ "in general prevent the \n"
-#~ "transfer,  duplication (except for backup purposes), redistribution, "
-#~ "reverse engineering, \n"
-#~ "de-assembly, \n"
-#~ "de-compilation or modification of the component. Any breach of agreement "
-#~ "will immediately terminate \n"
-#~ "your rights under the specific license. Unless the specific license terms "
-#~ "grant you such rights, \n"
-#~ "you usually cannot install the programs on more than one system, or adapt "
-#~ "it to be used on a \n"
-#~ "network. \n"
-#~ "In doubt, please contact directly the distributor or editor of the "
-#~ "component. Transfer to third \n"
-#~ "parties or copying of such components including the documentation is "
-#~ "usually forbidden.\n"
-#~ "\n"
-#~ "\n"
-#~ "3. Intellectual Property Rights\n"
-#~ "\n"
-#~ "All rights to the components of the Software Products belong to their "
-#~ "respective authors and are \n"
-#~ "protected by intellectual property and copyright laws applicable to "
-#~ "software programs.\n"
-#~ "MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-#~ "Products, as a whole or in \n"
-#~ "parts,\n"
-#~ "by all means and for all purposes.\n"
-#~ "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-#~ "MandrakeSoft S.A.  All rights \n"
-#~ "are \n"
-#~ "reserved. The duplication is forbidden without prior written consent by "
-#~ "MandrakeSoft S.A.\n"
-#~ "\n"
-#~ "\n"
-#~ "4. Limited Warranty\n"
-#~ "\n"
-#~ "The Software Products and attached documentation are provided \"as is\", "
-#~ "with no warranty, to the \n"
-#~ "extent permitted by law. Should the Software Products be defective, "
-#~ "MandrakeSoft S.A. will at its \n"
-#~ "own will either replace the Software Products, or reimburse the paid "
-#~ "fee.\n"
-#~ "This limited warranty is void if you fail to comply to the "
-#~ "recommendations, instructions and \n"
-#~ "conditions \n"
-#~ "of use listed in the documentation or license agreements of the Software "
-#~ "Products.\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. will in no "
-#~ "circumstances be liable for any \n"
-#~ "special, \n"
-#~ "incidental, direct or indirect damages whatsoever (including without "
-#~ "limitation damages for loss of \n"
-#~ "business, interruption of business, financial loss, legal fees and "
-#~ "penalties resulting from a court \n"
-#~ "judgement, or any other consequential loss) arising out of  the use or "
-#~ "inability to use the \n"
-#~ "Software \n"
-#~ "Products, even if MandrakeSoft S.A. has been advised of the possibility "
-#~ "or occurance of such \n"
-#~ "damages.\n"
-#~ "\n"
-#~ "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN "
-#~ "SOME COUNTRIES\n"
-#~ "\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. or its distributors "
-#~ "will, in no circumstances, be \n"
-#~ "liable for any special, incidental, direct or indirect damages whatsoever "
-#~ "(including without \n"
-#~ "limitation \n"
-#~ "damages for loss of business, interruption of business, financial loss, "
-#~ "legal fees and penalties \n"
-#~ "resulting from a court judgement, or any other consequential loss) "
-#~ "arising out of the possession \n"
-#~ "and \n"
-#~ "use of software components or arising out of  downloading software "
-#~ "components from one of \n"
-#~ "Mandrake Linux \n"
-#~ "sites  which are prohibited or restricted in some countries by local "
-#~ "laws. This limited liability \n"
-#~ "applies to, but is not restricted to, the strong cryptography components "
-#~ "included in the Software \n"
-#~ "Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "5. Governing Laws \n"
-#~ "\n"
-#~ "If any portion of this agreement is held void, illegal or inapplicable by "
-#~ "a court judgement, this \n"
-#~ "portion is excluded from this contract. You remain bound by the other "
-#~ "applicable sections of the \n"
-#~ "agreement.\n"
-#~ "The terms and conditions of this License are governed by the Laws of "
-#~ "France.\n"
-#~ "All disputes on the terms of this license will preferably be settled out "
-#~ "of court. As a last \n"
-#~ "resort, \n"
-#~ "the dispute will be referred to the appropriate Courts of Law of Paris - "
-#~ "France.\n"
-#~ "For any question on this document, please contact MandrakeSoft S.A.,  \n"
-#~ "43, rue d'Aboukir, 75002 Paris - France\n"
-#~ msgstr ""
-#~ " Introducció\n"
-#~ "\n"
-#~ "D'ara endavant, el sistema operatiu i els diferents components que "
-#~ "s'inclouen\n"
-#~ "a la distribució Mandrake Linux s'anomenaran els \"Productes de programari"
-#~ "\".\n"
-#~ "Els Productes de programari inclouen, però no es limiten a, el conjunt "
-#~ "de\n"
-#~ "programes, mètodes, regles i documentació relativa al sistema operatiu i "
-#~ "als\n"
-#~ "diferents components de la distribució Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "1. Acord de Llicència\n"
-#~ "\n"
-#~ "Si us plau, llegiu aquest document atentament. Aquest document és un "
-#~ "acord\n"
-#~ "de llicència entre vós i MandrakeSoft S.A., 43, rue d'Aboukir, 75002 "
-#~ "París,\n"
-#~ "França, que s'aplica als Productes de programari.\n"
-#~ "Pel fet d'instal·lar, duplicar o utilitzar els Productes de programari, "
-#~ "en \n"
-#~ "qualsevol manera, accepteu i esteu totalment d'acord, de manera "
-#~ "explícita, en\n"
-#~ "sometre-us als termes i condicions d'aquesta Llicència. Si no esteu "
-#~ "d'acord amb\n"
-#~ "qualsevol part d'aquesta Llicència, no esteu autoritzat a instal·lar, "
-#~ "duplicar\n"
-#~ "ni utilitzar els Productes de programari. Qualsevol intent d'instal·lar,\n"
-#~ "duplicar o utilitzar els Productes de programari d'una manera no conforme "
-#~ "als\n"
-#~ "termes i condicions d'aquesta Llicència és invàlid i conclourà els "
-#~ "vostres\n"
-#~ "drets sota aquesta Llicència. En concloure la Llicència, heu de destruir\n"
-#~ "immediatament totes les còpies dels Productes de programari.\n"
-#~ "\n"
-#~ "\n"
-#~ "2. la Llicència GPL i Llicències relacionades\n"
-#~ "\n"
-#~ "Els Productes de programari són components creats per diferents persones "
-#~ "o\n"
-#~ "entitats. La majoria d'aquests components estan coberts pels termes i\n"
-#~ "condicions de la Llicència General Pública de GNU (d'ara endavant \"GPL"
-#~ "\"), o\n"
-#~ "de llicències similars. La majoria d'aquestes llicències us permeten "
-#~ "utilitzar,\n"
-#~ "duplicar, adaptar o redistribuir els components que cobreixen. Si us "
-#~ "plau,\n"
-#~ "llegiu atentament els termes i condicions de l'acord de llicència de "
-#~ "cada\n"
-#~ "component abans d'utilitzar-lo. Qualsevol pregunta sobre un component "
-#~ "s'ha\n"
-#~ "d'adreçar al seu autor i no a MandrakeSoft. Els programes desenvolupats "
-#~ "per\n"
-#~ "MandrakeSoft S.A. estan coberts per la Llicència GPL. La documentació "
-#~ "escrita\n"
-#~ "per MandrakeSoft S.A. està coberta per una llicència específica. Si us "
-#~ "plau,\n"
-#~ "consulteu la documentació per a més informació. Algunes versions dels "
-#~ "Productes\n"
-#~ "de programari poden incloure components que no estiguin coberts per la\n"
-#~ "Llicència GPL o llicències similars; en aquest cas, cada un d'aquests\n"
-#~ "components estarà cobert pels termes i condicions de la seva pròpia "
-#~ "llicència\n"
-#~ "específica. Si us plau, llegiu atentament i respecteu aquestes "
-#~ "llicències\n"
-#~ "específiques abans d'instal·lar, utilitzar o redistribuir els components\n"
-#~ "esmentats. En general, aquestes llicències impediran la transferència,\n"
-#~ "duplicació (excepte amb la finalitat de fer còpies de seguretat),\n"
-#~ "redistribució, enginyeria inversa, desensamblatge, decompilació o "
-#~ "modificació\n"
-#~ "del component. Qualsevol ruptura de l'acord conclourà immediatament els "
-#~ "vostres\n"
-#~ "drets sota la llicència específica. Tret que els termes de la llicència\n"
-#~ "específica us ho autoritzin, normalment no podreu instal·lar els "
-#~ "programes en\n"
-#~ "més d'un sistema ni adaptar-lo per al seu ús en xarxa. Si hi teniu "
-#~ "dubtes,\n"
-#~ "poseu-vos en contacte directament amb el distribuïdor o editor del "
-#~ "component.\n"
-#~ "Normalment, està prohibida la transferència a terceres parts i la còpia\n"
-#~ "d'aquests components, incloent la documentació.\n"
-#~ "\n"
-#~ "\n"
-#~ "3. Drets de propietat intel·lectual\n"
-#~ "\n"
-#~ "Tots els drets dels components dels Productes de programari pertanyen als "
-#~ "seus\n"
-#~ "autors respectius i estan protegits per la propietat intel·lectual i les "
-#~ "lleis\n"
-#~ "de copyright aplicables al programari. MandrakeSoft S.A. es reserva els "
-#~ "drets\n"
-#~ "de modificar o adaptar els Productes de programari, ja sigui parcialment "
-#~ "o\n"
-#~ "totalment, per tots els mitjans i per a totes les finalitats. \"Mandrake"
-#~ "\",\n"
-#~ "\"Mandrake Linux\" i els logotips associats son marques registrades de\n"
-#~ "MandrakeSoft S.A.  Tots els drets reservats. Es prohibeix la duplicació "
-#~ "sense\n"
-#~ "consentiment previ per escrit de MandrakeSoft S.A.\n"
-#~ "\n"
-#~ "\n"
-#~ "4. Garantia limitada\n"
-#~ "\n"
-#~ "Els Productes de programari i la documentació que s'hi adjunta es "
-#~ "subministren\n"
-#~ "\"tal com són\", sense cap garantia, fins al punt permès per la llei. En "
-#~ "cas\n"
-#~ "que els Productes de programari siguin defectuosos, MandrakeSoft S.A., a\n"
-#~ "criteri seu, decidirà si reemplaça els Productes de programari o si en\n"
-#~ "reemborsa el preu pagat. Aquesta garantia limitada és nul·la si no "
-#~ "compliu les\n"
-#~ "recomanacions, instruccions i condicions d'ús que s'indiquen a la "
-#~ "documentació\n"
-#~ "o als acords de llicència dels Productes de programari. Fins al punt "
-#~ "permès per\n"
-#~ "la llei, MandrakeSoft S.A. no serà, en cap circumstància, responsable de "
-#~ "cap\n"
-#~ "dany especial, incidental, directe o indirecte (incloent, però sense "
-#~ "limitar-se\n"
-#~ "a, danys per pèrdua de negocis, interrupció de negocis, pèrdues "
-#~ "financeres,\n"
-#~ "honoraris i multes legals que resultin per un judici i qualsevol altre "
-#~ "pèrdua\n"
-#~ "important) que resulti de l'ús o impossibilitat d'utilitzar els Productes "
-#~ "de\n"
-#~ "programari, fins i tot si s'ha notificat a MandrakeSoft S.A. la "
-#~ "possibilitat de\n"
-#~ "que es produeixin aquests danys.\n"
-#~ "\n"
-#~ "RESPONSABILITAT LIMITADA LLIGADA A LA POSESSIÓ O UTILITZACIÓ DE "
-#~ "PROGRAMARI PROHIBIT EN ALGUNES PAÏSOS\n"
-#~ "\n"
-#~ "Fins al put permès per la llei, MandrakeSoft S.A. i els seus "
-#~ "distribuïdors no\n"
-#~ "seran, sota cap circumstància, responsables de cap dany especial, "
-#~ "incidental,\n"
-#~ "directe o indirecte (incloent, però sense limitar-se a, danys per pèrdua "
-#~ "de\n"
-#~ "negocis, interrupció de negocis, pèrdues financeres, honoraris i multes "
-#~ "legals\n"
-#~ "que resultin per un judici i qualsevol altre pèrdua important) que "
-#~ "resultin de\n"
-#~ "la possessió i ús de components de programari o de la descàrrega de "
-#~ "components\n"
-#~ "de programari d'algun dels llocs web de Mandrake Linux que estiguin "
-#~ "prohibits o\n"
-#~ "restringits en alguns països per lleis locals. Aquesta responsabilitat "
-#~ "limitada\n"
-#~ "s'aplica, però no està restringida a, els potents components de "
-#~ "criptografia\n"
-#~ "inclosos en els Productes de programari.\n"
-#~ "\n"
-#~ "\n"
-#~ "5. Lleis aplicables \n"
-#~ "\n"
-#~ "Si qualsevol part d'aquest acord és declarat nul, il·legal o inaplicable "
-#~ "en un\n"
-#~ "judici, aquesta part s'exclou del contracte, però seguiu obligat per les "
-#~ "altres\n"
-#~ "seccions aplicables de l'acord. Els termes i condicions d'aquesta "
-#~ "Llicència\n"
-#~ "estan coberts per les lleis de França. Preferiblement, tots els desacords "
-#~ "sobre\n"
-#~ "els termes d'aquesta Llicència es resoldran fora dels tribunals. Com a "
-#~ "últim\n"
-#~ "recurs, el plet es dirimirà en els tribunals de París, França.\n"
-#~ "Per a qualsevol pregunta sobre aquest document, poseu-vos en contacte "
-#~ "amb\n"
-#~ "MandrakeSoft S.A., 43, rue d'Aboukir, 75002 París, França.\n"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Es pot configurar el vostre ordinador per tal que comparteixi la connexió "
-#~ "a Internet.\n"
-#~ "\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "S'ha configurat tot.\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Connecta't a Internet amb un mòdem normal"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Connecta't a Internet mitjançant XDSI"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Connecta't a Internet mitjançant DSL (o ADSL)"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Connecta't a Internet mitjançant cable"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "Temps (en segons) d'inactivitat després del qual\n"
-#~ "penjarà (deixeu-ho en blanc per inhabilitar-ho)."
-
-#~ msgid "Germany"
-#~ msgstr "Alemany"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Alemanya (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Què voleu fer?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Instal·la/Rescata"
-
-#~ msgid "Rescue"
-#~ msgstr "Rescata"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Quin tipus de partició voleu?"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Escolliu \"Instal·lació\" si no hi ha instal·lada cap versió anterior de "
-#~ "GNU/Linux,\n"
-#~ "o si voleu utilitzar diverses distribucions o versions.\n"
-#~ "\n"
-#~ "Escolliu \"Rescat\" si voleu rescatar una versió anterior de\n"
-#~ "Mandrake Linux ja instal·lada.\n"
-#~ "\n"
-#~ "\n"
-#~ "Seleccioneu:\n"
-#~ "\n"
-#~ "  - Recomanada: Si mai no heu instal·lat el GNU/Linux,\n"
-#~ "    escolliu aquesta opció.\n"
-#~ "  - Personalitzada: Si esteu prou familiaritzat amb el GNU/Linux, podeu\n"
-#~ "    triar l'ús principal del vostre ordinador. Consulteu-ne els detalls\n"
-#~ "    més avall.\n"
-#~ "\n"
-#~ "  - Per a experts: S'assumeix que domineu el GNU/Linux i voleu realitzar "
-#~ "una\n"
-#~ "    instal·lació altament personalitzada. Com en el cas del tipus\n"
-#~ "    d'instal·lació \"Personalitzada\", podreu seleccionar l'ús del "
-#~ "vostre\n"
-#~ "    sistema.\n"
-#~ "    Però, si us plau, sobretot NO TRIEU AQUESTA OPCIÓ TRET QUE SAPIGUEU "
-#~ "QUÈ ESTEU FENT!\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "En aquest moment podeu decidir quina(es) partició(ns) voleu utilitzar\n"
-#~ "per instal·lar el sistema Mandrake Linux, si és que ja es va(n)\n"
-#~ "definir (en una instal·lació anterior del GNU/Linux o mitjançant una\n"
-#~ "altra eina de partició). En altres casos, s'han de definir les\n"
-#~ "particions del disc dur: aquesta operació consisteix en dividir el\n"
-#~ "disc dur de l'ordinador en àrees lògiques separades.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si heu de crear noves particions, utilitzeu \"Assignació\n"
-#~ "automàtica\" per crear particions per al GNU/Linux de manera automàtica.\n"
-#~ "Podeu triar el disc on s'hi han de fer les particions fent clic a\n"
-#~ "\"hda\" per a la primera unitat IDE, \"hdb\" per a la segona, o\n"
-#~ "\"sda\" per a la primera unitat SCSI, i així successivament.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dues particions habituals són: la partició root (/), que és el punt\n"
-#~ "d'inici de la jerarquia de directoris del sistema de fitxers, i\n"
-#~ "/boot, que conté tots els fitxers necessaris per iniciar el sistema\n"
-#~ "operatiu quan s'arrenca l'ordinador per primer cop.\n"
-#~ "\n"
-#~ "\n"
-#~ "Donat que aquest procés sol ser irreversible, la partició d'un disc\n"
-#~ "és sovint un procés que espanta als usuaris sense experiència, però\n"
-#~ "el DiskDrake simplifica molt aquest procés. Consulteu la documentació\n"
-#~ "i preneu-vos tant temps com sigui necessari abans de realitzar la\n"
-#~ "partició.\n"
-#~ "\n"
-#~ "Podeu accedir a qualsevol opció mitjançant el teclat: desplaceu-vos per "
-#~ "les particions amb el tabulador i les fletxes amunt i avall. Quan se "
-#~ "selecciona una partició, podeu utilitzar:\n"
-#~ "\n"
-#~ "- Ctrl-c  per crear una nova partició (quan se selecciona una partició "
-#~ "buida)\n"
-#~ "\n"
-#~ "- Ctrl-d  per suprimir una partició\n"
-#~ "\n"
-#~ "- Ctrl-m  per definir el punt de muntatge\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Cal formatar les particions que s'acaben de definir per poder-les\n"
-#~ "utilitzar ('formatar' significa 'crear un sistema de fitxers').\n"
-#~ "En aquest punt podeu, si voleu, tornar a formatar particions\n"
-#~ "existents per eliminar les dades que contenen. Nota: no és\n"
-#~ "necessari tornar a formatar les particions existents, especialment\n"
-#~ "si contenen fitxers o dades que voleu conservar.\n"
-#~ "Els directoris que es solen conservar són /home i /usr/local."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Ara s'estan instal·lant els paquets seleccionats. Aquesta operació\n"
-#~ "trigarà pocs minuts, tret que hagueu escollit actualitzar un\n"
-#~ "sistema existent; en aquest cas trigarà més temps, fins i tot\n"
-#~ "abans que s'iniciï la instal·lació."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Si el DrakX no ha pogut trobar el ratolí, o si voleu comprovar què\n"
-#~ "ha fet, a la part superior apareixerà la llista de ratolins.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si esteu d'acord amb els paràmetres del DrakX, feu clic a 'D'acord'.\n"
-#~ "Si no, escolliu, al menú superior, el tipus de ratolí que us sembli més "
-#~ "semblant al vostre.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si es tracta d'un ratolí sèrie, també us caldrà indicar al DrakX a\n"
-#~ "quin port sèrie està connectat."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Aquesta secció està dedicada a la configuració d'una xarxa local\n"
-#~ "(LAN) o d'un mòdem.\n"
-#~ "\n"
-#~ "Escolliu \"LAN local\" i el DrakX intentarà trobar un adaptador\n"
-#~ "Ethernet al vostre ordinador. El sistema trobarà i inicialitzarà\n"
-#~ "automàticament els adaptadors PCI.\n"
-#~ "No obstant això, si el vostre perifèric és ISA, la detecció\n"
-#~ "no funcionarà, i us caldrà escollir un programa de control a la\n"
-#~ "llista que apareixerà.\n"
-#~ "\n"
-#~ "\n"
-#~ "Com en el cas dels adaptadors SCSI, podeu deixar que, d'entrada,\n"
-#~ "el programa de control comprovi l'adaptador; si no ho feu així, us\n"
-#~ "caldrà especificar les opcions del programa de control que haureu\n"
-#~ "d'anar a buscar a la documentació del vostre maquinari.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si instal·leu un sistema Mandrake Linux en un ordinador que forma\n"
-#~ "part d'una xarxa existent, l'administrador de la xarxa us haurà de\n"
-#~ "facilitar la informació necessària (l'adreça IP, la submàscara de\n"
-#~ "xarxa i el nom de l'ordinador central). Si esteu configurant una\n"
-#~ "xarxa privada, com ara a casa, haureu d'escollir les adreces.\n"
-#~ "\n"
-#~ "\n"
-#~ "Escolliu \"Marcatge amb mòdem\" i es configurarà la connexió a\n"
-#~ "Internet amb un mòdem. El DrakX intentarà trobar el mòdem, però,\n"
-#~ "si no se'n surt, us caldrà seleccionar el port sèrie al qual està\n"
-#~ "connectat."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "El GNU/Linux pot treballar amb molts tipus d'impressores. Per a cada\n"
-#~ "un d'aquests tipus, però, cal una configuració diferent. Tingueu\n"
-#~ "en compte, però, que l'spooler utilitza 'lp' com a nom d'impressora\n"
-#~ "per defecte, de manera que heu de tenir una impressora amb aquest nom.\n"
-#~ "No obstant això, podeu donar diferents noms a una impressora, separant-\n"
-#~ "los amb el caràcter '|'. D'aquesta manera, si voleu donar-li un nom més\n"
-#~ "aclaridor només us caldrà indicar-lo en primer lloc, p.ex. \"La meva\n"
-#~ "impressora|lp\".\n"
-#~ "La impressora que contingui \"lp\" al(s) nom(s) serà la impressora per\n"
-#~ "defecte\n"
-#~ "\n"
-#~ "\n"
-#~ "Si la vostra impressora està connectada directament a l'ordinador,\n"
-#~ "seleccioneu \"Impressora local\". Haureu d'indicar a quin port\n"
-#~ "està connectada i seleccionar-ne el filtre corresponent.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu accedir a una impressora que es troba a un ordinador Unix\n"
-#~ "remot, seleccioneu \"lpd remot\". Per poder-la fer funcionar no\n"
-#~ "cal cap nom d'usuari ni contrasenya, però us caldrà saber el nom\n"
-#~ "de la cua d'impressió del servidor remot.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu accedir a una impressora SMB (és a dir, una impressora\n"
-#~ "que es troba a un ordinador remot amb Windows 9x/NT), per poder-ho\n"
-#~ "fer haureu d'indicar el seu nom SMB (que no és el seu nom TCP/IP)\n"
-#~ "i possiblement la seva adreça IP, nom d'usuari, grup de treball,\n"
-#~ "contrasenya, i, evidentment, el nom de la impressora. El mateix\n"
-#~ "per a una impressora NetWare, però en aquest cas no us caldrà la\n"
-#~ "informació del grup de treball."
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "És molt recomanable que respongueu \"Sí\" aquí. Si més endavant\n"
-#~ "instal·leu Microsoft Windows, sobreescriurà el sector d'arrencada.\n"
-#~ "Tret que hagueu fet el disc d'arrencada com es\n"
-#~ "recomana, ja no podreu tornar a arrencar el GNU/Linux."
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Moveu la bola!"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Voleu descartar els canvis?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "De quin tipus és el vostre ratolí?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Resolucions automàtiques"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Per saber quines resolucions estan disponibles, en provaré algunes.\n"
-#~ "La pantalla parpellejarà...\n"
-#~ "Ho podeu desactivar si voleu; sentireu un avís sonor quan estigui llest"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Puc mirar de trobar les resolucions disponibles (p.ex. 800x600).\n"
-#~ "De vegades, però, això pot penjar l'ordinador.\n"
-#~ "Us hi voleu arriscar?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "No s'han trobat modes vàlids\n"
-#~ "Intenteu-ho amb una altra targeta de vídeo o monitor"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Recerca automàtica de resolucions"
-
-#~ msgid "dhcpd"
-#~ msgstr "dhcpd"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-client"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB Mouse"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB Mouse (2 botons)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB Mouse (3 o més botons)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB Mouse"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB Mouse (2 botons)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB Mouse (3 o més botons)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Bus Mouse"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft Bus Mouse"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech Bus Mouse"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB Mouse (3 o més botons)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A o superior (sèrie)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (sèrie)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (sèrie)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (sèrie)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Generic Mouse (sèrie)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Compatible Microsoft (sèrie)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Ratolí Generic de 3 botons (sèrie)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Ratolí Kensington Thinking (sèrie)"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr ""
-#~ "Necessito configurar el vostre adaptador de xarxa por poder connectar a "
-#~ "Internet."
-
-#~ msgid "nfs mount failed"
-#~ msgstr "ha fallat el muntatge de l'nfs"
-
-#~ msgid "Socket"
-#~ msgstr "Sòcol"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "El DrakX generarà els fitxers de configuració tant per a l'XFree 3.3 com "
-#~ "per a l'Xfree 4.0.\n"
-#~ "Per defecte, s'utilitza el servidor 4.0, tret que no funcioni per a la "
-#~ "vostra targeta.\n"
-#~ "\n"
-#~ "Voleu conservar l'Xfree 3.3?"
-
-#~ msgid "tie"
-#~ msgstr "llaç"
-
-#~ msgid "brunette"
-#~ msgstr "morena"
-
-#~ msgid "girl"
-#~ msgstr "noia"
-
-#~ msgid "woman-blond"
-#~ msgstr "dona-rossa"
-
-#~ msgid "automagic"
-#~ msgstr "automagic"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Criptogràfic"
-
-#~ msgid "Take over the hard drive"
-#~ msgstr "Encarrega't del disc dur"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "No configuris la xarxa"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Voleu configurar la xarxa local per al vostre sistema?"
-
-#~ msgid "Have you been provided with a hostname?"
-#~ msgstr "Us han donat un nom d'ordinador central?"
-
-#~ msgid "Show less"
-#~ msgstr "Mostra'n menys"
-
-#~ msgid "Show more"
-#~ msgstr "Mostra'n més"
-
-#~ msgid "URI for Local printer"
-#~ msgstr "URI per a la impressora local"
-
-#~ msgid "URI for Network printer"
-#~ msgstr "URI per a la impressora de xarxa"
-
-#~ msgid "Local Printer Device (URI)"
-#~ msgstr "Dispositiu de la impressora local (URI)"
-
-#~ msgid ""
-#~ "What URI device is your printer connected to\n"
-#~ "(note that parallel:/dev/lp0 is equivalent to LPT1:)?"
-#~ msgstr ""
-#~ "A quin dispositiu URI està connectada la vostra impressora?\n"
-#~ "(tingueu en compte que parallel:/dev/lp0 equival a LPT1:)"
-
-#~ msgid "Network Printer Options (URI)"
-#~ msgstr "Opcions de la impressora de xarxa (URI)"
-
-#~ msgid ""
-#~ "Choose the right Device URI for a network printer or a local file. "
-#~ "Examples:\n"
-#~ "   file:/path/to/filename.prn\n"
-#~ "   http://hostname:631/ipp/port1\n"
-#~ "   ipp://hostname/ipp/port1\n"
-#~ "   lpq://hostname/queue\n"
-#~ "   socket://hostname\n"
-#~ "   socket://hostname:9100"
-#~ msgstr ""
-#~ "Seleccioneu l'URI de dispositiu correcte per a una impressora de xarxa o "
-#~ "un fitxer local. Exemples:\n"
-#~ "   file:/camí/al/nomdefitxer.prn\n"
-#~ "   http://ordinadorcentral:631/ipp/port1\n"
-#~ "   ipp://ordinadorcentral/ipp/port1\n"
-#~ "   lpq://ordinadorcentral/cua\n"
-#~ "   socket://ordinadorcentral\n"
-#~ "   socket://ordinadorcentral:9100"
-
-#~ msgid "Local Area Network specification"
-#~ msgstr "Especificació de la xarxa d'àrea local"
-
-#~ msgid "You may now decide which class C network to use.\n"
-#~ msgstr "Ara podeu decidir quina xarxa de classe C voleu utilitzar.\n"
-
-#~ msgid "Network:"
-#~ msgstr "Xarxa:"
-
-#~ msgid "Internet Connection Sharing - setup of %s"
-#~ msgstr "Connexió a Internet compartida: configuració de %s"
-
-#~ msgid ""
-#~ "The following interface is about to be configured:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Ara es configurarà la interfície següent:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-
-#~ msgid "Everything configured!"
-#~ msgstr "S'ha configurat tot!"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Quina és la disposició del vostre teclat?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Voleu que intenti trobar targetes PCMCIA?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Voleu que intenti trobar els dispositius %s?"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr ""
-#~ "Voleu configurar el marcatge amb xarxa per mòdem per al vostre sistema?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Voleu que intenti trobar dispositius PCI?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "S'està cercant la partició arrel."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr ""
-#~ "%s: Aquesta partició no és arrel; si us plau, seleccioneu-ne una altra."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "Si us plau, seleccioneu una partició per utilitzar-la com a arrel."
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "No teniu cap partició de Windows!"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "No teniu prou espai per al Lnx4win"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Benvingut al LILO, la utilitat que us permet triar el sistema operatiu!\n"
-#~ "\n"
-#~ "Per obtenir una llista de les eleccions possibles, premeu <TAB>.\n"
-#~ "\n"
-#~ "Per carregar-ne una, escriviu-ne el nom i premeu <INTRO> o espereu %d "
-#~ "segons\n"
-#~ "fins a l'arrencada predeterminada.\n"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Benvingut al SILO, la utilitat que us permet triar el sistema operatiu!\n"
-#~ "\n"
-#~ "Per obtenir una llista de les eleccions possibles, premeu <TAB>.\n"
-#~ "\n"
-#~ "Per carregar-ne una, escriviu-ne el nom i premeu <INTRO> o espereu %d "
-#~ "segons\n"
-#~ "fins a l'arrencada predeterminada.\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "Opcions principals del SILO"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Aquestes són les entrades següents del SILO.\n"
-#~ "Podeu afegir-ne algunes més o canviar-ne les existents."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Aquesta etiqueta ja està en ús"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "Ha fallat la instal·lació del SILO. S'ha produït l'error següent:"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "En primer lloc, el DrakX intentarà trobar un o més adaptadors SCSI\n"
-#~ "PCI. Si en troba, i sap quin(s) programa(es) de control utilitzar,\n"
-#~ "l'inserirà o els inserirà automàticament.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si el vostre adaptador SCSI és una targeta ISA, o si és PCI però\n"
-#~ "el DrakX no sap amb quin programa de control ha d'utilitzar-la, o\n"
-#~ "si no teniu cap adaptador SCSI, se us preguntarà si en teniu un o\n"
-#~ "no. Si no en teniu cap, respongueu \"No\". Si en teniu un o més,\n"
-#~ "respongueu \"Sí\". Apareixerà una llista de programes de control,\n"
-#~ "de la qual n'haureu de triar un.\n"
-#~ "\n"
-#~ "\n"
-#~ "Un cop hagueu triat el programa de control, el DrakX us preguntarà\n"
-#~ "si voleu establir-ne les opcions. Primer, però, deixeu que el\n"
-#~ "programa de control explori el maquinari: normalment funciona bé.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no, no oblideu la informació sobre el vostre maquinari que\n"
-#~ "pugueu aconseguir a la documentació o al Windows (si el teniu al\n"
-#~ "sistema), com aconsella la guia d'instal·lació. Aquestes són les\n"
-#~ "opcions que haureu de proporcionar al programa de control."
-
-#~ msgid "Shutting down"
-#~ msgstr "S'està tancant l'ordinador"
-
-#~ msgid ""
-#~ "Some true type fonts from windows have been found on your computer.\n"
-#~ "Do you want to use them? Be sure you have the right to use them under "
-#~ "Linux."
-#~ msgstr ""
-#~ "S'han trobat alguns tipus de lletra \"true type\" del Windows a "
-#~ "l'ordinador.\n"
-#~ "Voleu utilitzar-les? Assegureu-vos que esteu autoritzat a utilitzar-les "
-#~ "sota Linux."
-
-#~ msgid "useless"
-#~ msgstr "inútil"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Escolliu \"Instal·la\" si no hi ha instal·lada cap versió anterior de "
-#~ "Linux,\n"
-#~ "o si voleu utilitzar diverses distribucions o versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Escolliu \"Actualització\" si voleu actualitzar una versió anterior de\n"
-#~ "Mandrake Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) 6.0 (Venus),\n"
-#~ "6.1 (Helios), Gold 2000 o 7.0 (Air)."
-
-#~ msgid ""
-#~ "(a user ``mandrake'' with password ``mandrake'' has been automatically "
-#~ "added)"
-#~ msgstr ""
-#~ "(s'ha afegit automàticament un usuari ``mandrake'' amb contrasenya "
-#~ "``mandrake'')"
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "Voleu utilitzar el LILO?"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "Ara podeu seleccionar els paquets que voleu instal·lar.\n"
-#~ "\n"
-#~ "\n"
-#~ "En primer lloc, podeu seleccionar el grup del paquet a instal·lar\n"
-#~ "o actualitzar. Després, podeu seleccionar més paquets segons la\n"
-#~ "mida total que voleu seleccionar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si treballeu amb el mode expert, podeu seleccionar els paquets\n"
-#~ "individualment.\n"
-#~ "Tingueu en compte, però, que alguns paquets necessiten que altres\n"
-#~ "també estiguin instal·lats.\n"
-#~ "Això s'anomena 'dependència de paquets'. Els paquets que\n"
-#~ "seleccioneu, i els que aquests necessitin, es seleccionaran\n"
-#~ "automàticament per a la instal·lació. No és possible instal·lar un\n"
-#~ "paquet sense instal·lar-ne tots els dependents."
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "El LILO (el carregador de Linux) pot arrencar el Linux i altres sistemes\n"
-#~ "operatius, que normalment es detecten correctament durant la "
-#~ "instal·lació.\n"
-#~ "Si veieu que el vostre no s'ha detectat, ara podeu afegir-ne un o més.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no voleu que tothom pugui accedir a algun d'ells, podeu\n"
-#~ "eliminar-lo ara (caldrà un disc d'arrencada per arrencar-lo)."
-
-#~ msgid ""
-#~ "Now that you've selected desired groups, please choose \n"
-#~ "how many packages you want, ranging from minimal to full \n"
-#~ "installation of each selected groups."
-#~ msgstr ""
-#~ "Ara que ja heu seleccionat els grups desitjats, seleccioneu \n"
-#~ "quants paquets voleu, ordenant-los des de la instal·lació mínima \n"
-#~ "fins a la instal·lació completa de cadascun dels grups seleccionats."
-
-#~ msgid ""
-#~ "You need %dMB for a full install of the groups you selected.\n"
-#~ "You can go on anyway, but be warned that you won't get all packages"
-#~ msgstr ""
-#~ "Us calen %dMB per a una instalació completa dels grups que heu "
-#~ "seleccionat.\n"
-#~ "Podeu continuar igualment, però tingueu en compte que no tindreu tots els "
-#~ "paquets"
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "Escolliu un altre CD per instal·lar"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Seleccioneu:\n"
-#~ "\n"
-#~ "  - Recomanada: Si mai no heu instal·lat el Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Personalitzada: Si esteu familiaritzat amb el Linux, podreu\n"
-#~ "triar l'ús del sistema instal·lat entre Normal, Desenvolupament o\n"
-#~ "Servidor. Trieu \"Normal\" per a una instal·lació per a un ús\n"
-#~ "general del vostre ordinador, \"Desenvolupament\" si utilitzareu\n"
-#~ "l'ordinador principalment per a desenvolupament de programari,\n"
-#~ "o \"Servidor\" si voleu instal·lar un servidor convencional (per\n"
-#~ "a correu, impressions...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Per a experts: Si domineu el GNU/Linux i voleu realitzar una\n"
-#~ "instal·lació totalment personalitzada, aquest és el vostre\n"
-#~ "tipus d'instal·lació. Podreu seleccionar l'ús del vostre sistema\n"
-#~ "com a \"Personalitzada\"."
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "S'estan descarregant els paquets criptogràfics"
-
-#~ msgid "Setup SCSI"
-#~ msgstr "Configura el SCSI"
-
-#~ msgid "Installation CD Nr %s"
-#~ msgstr "CD d'instal·lació Nr %s"
-
-#~ msgid ""
-#~ "Update installation image!\n"
-#~ "\n"
-#~ "Ask your system administrator or reboot to update your installation image "
-#~ "to include\n"
-#~ "the Cd-Rom image labelled \"%s\". Press Ok if image has been updated or "
-#~ "press Cancel\n"
-#~ "to avoid installation from this Cd-Rom image."
-#~ msgstr ""
-#~ "Actualitzeu la imatge de la instal·lació!\n"
-#~ "\n"
-#~ "Consulteu a l'administrador del sistema o torneu a arrencar per "
-#~ "actualitzar\n"
-#~ "la imatge de la instal·lació per incloure la imatge en CD-ROM etiquetada "
-#~ "com\n"
-#~ "\"%s\". Premeu D'acord si la imatge s'ha actualitzat o premeu Cancel·la "
-#~ "per\n"
-#~ "no fer la instal·lació des d'aquesta imatge en Cd-ROM."
-
-#~ msgid "Which language do you want?"
-#~ msgstr "Quin idioma voleu?"
-
-#~ msgid "Hurt me plenty"
-#~ msgstr "Fes-me molt de mal"
-
-#~ msgid "Which packages do you want to install"
-#~ msgstr "Quins paquets voleu instal·lar"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "Quina utilització voleu?"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "Instal·lació o actualització"
-
-#~ msgid "Enter a floppy (all data will be lost)"
-#~ msgstr ""
-#~ "Inseriu un disquet a la unitat\n"
-#~ "(Se'n perdran totes les dades)"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr "Ara s'instal·laran %d MB. Podeu triar instal·lar més programes"
-
-#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
-#~ msgstr "S'han escollit massa paquets: %dMB no cap a %dMB"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "Fitxer d'inici ràpid %s incorrecte (ha fallat %s)"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Mida: %s MB"
-
-#~ msgid "US Keyboard"
-#~ msgstr "Teclat EU"
-
-#~ msgid "resizing"
-#~ msgstr "s'està canviant la mida"
-
-#~ msgid "formatting"
-#~ msgstr "s'està formatant"
-
-#~ msgid "changing type of"
-#~ msgstr "s'està canviant el tipus de"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Després de %s partició %s,"
-
-#~ msgid "linear"
-#~ msgstr "lineal"
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "Lineal (necessari per a algunes unitats SCSI)"
-
-#~ msgid "beginner"
-#~ msgstr "principiant"
-
-#~ msgid "developer"
-#~ msgstr "desenvolupador"
-
-#~ msgid "expert"
-#~ msgstr "expert"
-
-#~ msgid "Password:"
-#~ msgstr "Contrasenya:"
-
-#~ msgid "User name:"
-#~ msgstr "Nom d'usuari:"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "No s'ha pogut crear un disquet d'arrencada HTP.\n"
-#~ "Potser us caldrà reiniciar la instal·lació i introduir \"%s\" a "
-#~ "l'indicador"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "Cal reiniciar la instal·lació amb els nous paràmetres"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "Cal reiniciar la instal·lació arrencant des del disquet"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "Introduïu un disquet per una arrencada habilitada per a HTP\n"
-#~ "(es perdran totes les dades del disquet)"
-
-#~ msgid ""
-#~ "Linux does not yet fully support ultra dma 66.\n"
-#~ "As a work-around i can make a custom floppy giving access the hard drive "
-#~ "on ide2 and ide3"
-#~ msgstr ""
-#~ "El Linux encara no suporta completament l'ultra dma 66.\n"
-#~ "Com a alternativa, puc fer un disquet personalitzat que doni accés a tot "
-#~ "el disc dur a ide2 i ide3"
-
-#~ msgid "A entry %s already exists"
-#~ msgstr "Ja existeix una entrada %s"
-
-#~ msgid "Installation CD Nr 1"
-#~ msgstr "CD d'instal·lació Nr 1"
-
-#~ msgid "Local LAN"
-#~ msgstr "LAN local"
diff --git a/perl-install/share/po/cs.po b/perl-install/share/po/cs.po
deleted file mode 100644
index d427325ad..000000000
--- a/perl-install/share/po/cs.po
+++ /dev/null
@@ -1,9183 +0,0 @@
-# Czech messages for DrakX.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (C) 1999 MandrakeSoft
-# Vladimír Marek <vlmarek@volny.cz>, 2000
-# Radek Vybiral <Radek.Vybiral@vsb.cz>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-09-22 15:31GMT+0200\n"
-"Last-Translator: Radek Vybíral <Radek.Vybiral@vsb.cz>\n"
-"Language-Team: Czech <cs@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Konfigurovat v¹echny monitory nezávisle"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Pou¾ít roz¹íøení Xinerama"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigurovat pouze kartu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Konfigurace dvou monitorù"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Vá¹ systém podporuje zobrazení na dvou monitorech.\n"
-"Co chcete dìlat?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Grafická karta"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Zvolte typ va¹í grafické karty"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Zvolte X server"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Které XFree byste chtìli pou¾ít?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹e karta podporuje 3D akceleraci, ale pouze s XFree %s.\n"
-"Pokud pou¾ijete XFree %s, mù¾ete na druhou stranu dosáhnout lep¹ích výsledkù "
-"ve 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "S XFree %s mù¾e va¹e karta vyu¾ít 3D hardwarové akcelerace."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s s hardwarovou 3D akcelerací"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"S XFree %s mù¾e va¹e karta vyu¾ít 3D hardwarové akcelerace.\n"
-" TOTO JE POUZE EXPERIMENTÁLNÍ VERZE, A MÙ®E VÉST K NESTABILITÌ SYSTÉMU."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s s EXPERIMENTÁLNÍ 3D hardwarovou akcelerací"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹e karta podporuje 3D akceleraci, ale pouze s XFree %s,\n"
-"TOTO JE POUZE EXPERIMENTÁLNÍ VERZE, A MÙ®E VÉST K NESTABILITÌ SYSTÉMU.\n"
-"Va¹e karta je podporována i v XFree %s, kde mù¾e mít lep¹í podporu pro 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalaèní ovladaè pro obrazovku)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "Nastavení XFree"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Kolik pamìti je na va¹í grafické kartì ?"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Zvolte mo¾nosti pro daný X server"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Zvolte typ svého monitoru"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva rozhodující parametry jsou: vertikální synchronizaèní frekvence, co¾ je\n"
-"frekvence, kterou je obnovována celá obrazovka, a frekvence øádkové\n"
-" synchronizace (horiz. sync. rate), co¾ je frekvence jakou jsou zobrazovány\n"
-"jednotlivé mikroøádky (scanline).\n"
-"\n"
-"Je VELMI DÙLE®ITÉ abyste nezvolili typ monitoru se schopnostmi vy¹¹ími ne¾ "
-"má\n"
-"vá¹ monitor, proto¾e byste si ho tím mohli po¹kodit. Jestli¾e si nejste "
-"jistí\n"
-"zvolte radìji typ s ni¾¹ími schopnostmi."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Horizontální(øádková) synchronizace"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Vertikální(obrazovková) synchronizace"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Monitor není nastaven"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Grafická karta je¹tì není nastavena"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Je¹tì nejsou zvolena rozli¹ení"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Chcete si vyzkou¹et nastavení?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Varování: na této grafické kartì je testování nebezpeèné"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Vyzkou¹et nastavení"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"zkuste zmìnit nìkteré parametry"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Vyskytla se tato chyba:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Test skonèí automaticky za %d sekund"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Je to správné nastavení?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Vyskytla se chyba, zkuste zmìnit nìkteré parametry"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Rozli¹ení"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Vyberte si rozli¹ení a barevnou hloubku"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafická karta: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Expertní re¾im"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Ukázat v¹e"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Rozli¹ení"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Rozlo¾ení klávesnice: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Typ my¹i: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Pøípojení my¹i: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Horizontální frekvence monitoru: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Vertikální frekvence monitoru: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafická karta: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifikace grafické karty: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Pamì» na gr. kartì: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Barevná hloubka: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rozli¹ení: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ovladaè: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Pøipravuji nastavení X-Window"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Co chcete dìlat?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Zmìnit monitor"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Zmìnit grafickou kartu"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Zmìnit parametry X Serveru"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Zmìnit rozli¹ení"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Zobrazit informace"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Znovu vyzkou¹et nastavení X"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Konec"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Zachovat zmìny?\n"
-"Aktuální konfigurace je:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Pro aktivaci zmìn se prosím znovu pøihlaste na %s"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Prosím odhlaste se a pak stisknìte Ctrl-Alt-Backspace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "Spou¹tí se X"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Mù¾u nastavit vá¹ poèítaè tak, aby automaticky spustil X pøi startu.\n"
-"Chcete aby poèítaè po zapnutí spustil grafický re¾im?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 barev (8 bitù)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tisíc barev (15 bitù)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tisíc barev (16 bitù)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miliónù barev (24 bitù)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardy barev (32 bitù)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB nebo více"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Klasické VGA, 640x480 pøi 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 pøi 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Kompatibilní s 8514, 1024x768 pøi 87 Hz prokládanì (ne 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 pøi 87 Hz prokládanì, 800x600 pøi 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Lep¹í Super VGA, 800x600 pøi 60 Hz, 640x480 pøi 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Neprokládaná SVGA, 1024x768 pøi 60 Hz, 800x600 pøi 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Vysokofrekvenèní SVGA, 1027x768 pøi 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multifrekvenèní který umí 1280x1024 pøi 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multifrekvenèní, který umí 1280x1024 pøi 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multifrekvenèní, který umí 1280x1024 pøi 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor, který umí 1600x1200 pøi 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor, který umí 1600x1200 pøi 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "První sektor zavádìcího diskového oddílu"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "První sektor disku (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "Instalace SILO"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Kam chcete nainstalovat zavádìcí program?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "Instalace LILO/Grub"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO s textovou nabídkou"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO s grafickou nabídkou"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Spu¹tìní s DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Základní nastavení zavádìcího programu"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Zavádìcí program"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Instalace zavádìcího programu"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Startovací zaøízení"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nefunguje se starým BIOSem)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Kompaktní"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "kompaktní"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Textový re¾im"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Prodleva pøed automatickým spu¹tìním"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Heslo"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Heslo (podruhé)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Omezení nastavení z pøíkazové øádky"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "omezení"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Vyèistit /tmp pøi ka¾dém startu"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Pokud je tøeba, upøesnìte velikost pamìti (nalezeno %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Povolit více profilù"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Zadejte velikost pamìti v MB"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Volba ''Omezení nastavení z pøíkazové øádky'' je bezpøedmìtné bez hesla"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Zkuste to znovu, prosím"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Hesla nejsou shodná"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Úvodní zpráva"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Prodleva pro firmware"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Prodleva pøi spu¹tìní"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Povolit spu¹tìní z CD?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Povolit zavadìè OF?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Výchozí OS?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Tady jsou v¹echny záznamy.\n"
-"Mù¾ete pøidat dal¹í nebo zmìnit stávající."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Pøidat"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Hotovo"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Zmìnit"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Jaký typ záznamu chcete pøidat?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Jiný systém (SunOs...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Jiný systém (MacOs...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Jiný systém (Windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Obraz(image)"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Koøenový(root)"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Pøipojit"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Pro ètení i zápis"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tabulka"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Nejistý"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Znaèka"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Výchozí"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-velikost"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "Bez Videa"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Odstranit záznam"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Prázdná znaèka není povolena"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Tato znaèka se ji¾ pou¾ívá"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Na¹el jsem %s %s rozhraní"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Máte je¹tì nìjaké jiné?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Máte nìjaké %s rozhraní?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Ano"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Ukázat informace o hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaluji ovladaè pro %s kartu %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Který %s ovladaè mám zkusit?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"V nìkterých pøípadech potøebuje ovladaè %s pro svoji správnou funkci dal¹í\n"
-"informace, pøesto¾e normálnì funguje i bez nich. Chtìli byste zadat\n"
-"nìjaké doplòující mo¾nosti, nebo radìji necháte ovladaè samostatnì "
-"prozkoumat\n"
-"hardware va¹eho poèítaèe, aby získal informace které potøebuje? Zkoumání\n"
-"hardware mù¾e ve vyjímeèných pøípadech zpùsobit zamrznutí poèítaèe, ale "
-"nemìlo\n"
-"by v ¾ádném pøípadì zpùsobit jiné ¹kody."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Automatické prozkoumání"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Zadejte mo¾nosti"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Nyní mù¾ete poskytnout modulu %s dal¹í parametry."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Nyní mù¾ete poskytnout modulu %s dal¹í parametry.\n"
-"Volby se zadávají ve tvaru ''jméno=hodnota jméno2=hodnota2 ...''.\n"
-"Napøíklad, ''io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Volby modulu:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Spu¹tìní modulu %s selhalo.\n"
-"Chcete to zkusit s jinými parametry?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(u¾ byl pøidán %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Toto heslo je pøíli¹ jednoduché"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Prosím zadejte u¾ivatelské jméno"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "U¾ivatelské jméno mù¾e obsahovat pouze malá písmena, èísla, '-' a '_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Toto u¾ivatelské jméno u¾ bylo pøidáno"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Pøidat u¾ivatele"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Zadejte u¾ivatele\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Vytvoøit u¾ivatele"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Skuteèné jméno"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "U¾ivatelské jméno"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Automatické pøihlá¹ení"
-
-#: ../../any.pm_.c:757
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Mù¾u nastavit vá¹ poèítaè tak, aby automaticky pøihlásil vybraného "
-"u¾ivatele.\n"
-"Chcete pou¾ít tuto mo¾nost?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Zvolte standardního u¾ivatele :"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Vyberte si, který správce oken má být spou¹tìn:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Prosím zvolte si, který jazyk chcete pou¾ívat."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "Mù¾ete si zvolit dal¹í jazyky, které budou dostupné po instalaci"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "V¹echno"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Vita Vas %s, program pro start operacniho systemu!\n"
-"\n"
-"Vyberte si ze seznamu operacnich systemu nize nebo\n"
-"pockejte %d vterin pro automaticky start.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Vita Vas GRUB, program pro vyber operacniho systemu"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Pro vyber polozek pouzijte klavesy %c a %c."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Stisknete ENTER pro start vybraného OS, 'e' pro upravu"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "spoustecich parametru, nebo 'c' pro prikazovou radku."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Vybrana polozka bude automaticky spustena za %d sekund."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "není dost místa v adresáøi /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Pracovní plocha"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Nabídka Start"
-
-#: ../../bootloader.pm_.c:972
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Zavádìcí program nelze nainstalovat na oddíl %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "nápovìda zatím nedostupná.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Nastavení stylu zavádìní"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "_Soubor"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Soubor/_Konec"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>K"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Novìj¹í zatøídìný monitor "
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Novìj¹í monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradièní monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradièní Gtk+ monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Spustit Auroru pøi startu"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Re¾im Lilo/Grub"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Jako správce spou¹tìní nyní pou¾íváte %s.\n"
-"Pokud chcete spustit prùvodce nastavením, kliknìte na Konfigurovat."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Konfigurovat"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Startovací re¾im"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Systémový re¾im"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Spustit X-Window pøi startu"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Ne, nechci automatické pøihlá¹ení"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ano, chci automatické pøihlá¹ení s tímto (u¾ivatelem, desktopem)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Zru¹it"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "nelze otevøít /etc/inittab pro ètení: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Instalace LILO neuspìla. Stala se tato chyba:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minut(y)"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minuta"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekund"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Zálohujte si nejdøív svá data, prosím"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Ètìte pozornì!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Jestli¾e chcete pou¾ívat aboot, musíte nechat volné místo na zaèátku disku\n"
-"(2048 sektorù staèí)"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Chyba"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Prùvodce"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Nový"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "Vzdálený"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Pøípojný bod"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Volby"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Zmìnit typ"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Odpojit"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Pøipojit"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Co udìláte ?"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Máte jeden veliký oddíl FAT\n"
-"(vìt¹inou pou¾ívaný Microsoft Dos/Windows).\n"
-"Doporuèuji vám nejprve zmen¹it tento oddíl\n"
-"(klepnìte na nìj a potom na\n"
-"\"Zmìnit velikost\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Prosím klepnìte na oddíl"
-
-#: ../../diskdrake.pm_.c:240
-msgid "Please click on a media"
-msgstr "Prosím klepnìte na zdroj"
-
-#: ../../diskdrake.pm_.c:243
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr ""
-"Prosím klepnìte na tlaèítko nahoøe\n"
-"\n"
-"nebo na Pou¾ít \"Nový\""
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr "Pou¾ít \"Nový\""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Detaily"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Journalised FS"
-msgstr "®urnálovací FS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOs"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Odkládací (swap)"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Prázdný"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Dal¹í"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Souborové systémy:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Vytvoøit"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Místo toho pou¾ijte ``%s''"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Smazat"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Nejprve pou¾ijte ``Odpojit''"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Tím ¾e zmìníte typ oddílu %s pøijdete o v¹echna jeho data"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kam chcete pøipojit zaøízení %s?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "Volby pro pøipojení"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "Dal¹í"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "Vyjímatelná média"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "Zmìnit typ"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Který souborový systém chcete pou¾ít?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "Prohledávám v¹echny dostupné nfs zdroje"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "Prohledávám v¹echny dostupné nfs zdroje na serveru %s"
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr "Pokud seznam nahoøe neobsahuje po¾adovanou hodnotu, zadejte ji zde:"
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Server"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "Sdílené zdroje"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "Prohledávám v¹echny dostupné samba zdroje"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "Prohledávám v¹echny dostupné samba zdroje na serveru %s"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "Vyberte oddíl"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Vyberte jiný oddíl"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Konec"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Pøepnout se do módu 'expert'"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Pøepnout se do módu 'normální'"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Zpìt"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Pøesto chcete pokraèovat?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Konec bez ulo¾ení"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Chcete skonèit bez zapsání do tabulky oddílù?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Chcete ulo¾it modifikaci souboru /etc/fstab?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Automaticky rozmístit"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "V¹e smazat"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Více"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "Informace o hardisku"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Není dostatek místa pro automatické rozdìlení disku"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "V¹echny primární oddíly (partitions) jsou pou¾ívány"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Nemù¾u pøidat ¾ádný dal¹í oddíl"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Abyste mohli mít více oddílù, musíte smazat jeden existující a na jeho "
-"místì\n"
-"vytvoøit roz¹íøený(extended) oddíl"
-
-#: ../../diskdrake_interactive.pm_.c:285
-msgid "Save partition table"
-msgstr "Ulo¾it tabulku oddílù"
-
-#: ../../diskdrake_interactive.pm_.c:286
-msgid "Restore partition table"
-msgstr "Obnovit tabulku oddílù"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Záchrana tabulky oddílù"
-
-#: ../../diskdrake_interactive.pm_.c:289
-msgid "Reload partition table"
-msgstr "Znovu naèíst tabulku oddílù"
-
-#: ../../diskdrake_interactive.pm_.c:293
-msgid "Removable media automounting"
-msgstr "Automatické pøipojování pro vyjímatelná média"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Zvolit soubor"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Zálo¾ní tabulka oddílù nemá stejnou velikost\n"
-"Chcete pøesto chcete pokraèovat?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Varování"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Vlo¾te disketu do mechaniky\n"
-"V¹echna data na této disketì budou smazána"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Pokou¹ím se obnovit tabulku oddílù"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "Podrobné informace"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Zmìnit velikost"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Pøesunout"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formátovat"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Aktivní"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Pøidat do RAIDu"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Pøidat do LVMu"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Odebrat z RAIDu"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Odebrat z LVMu"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Zmìnit RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Pou¾ít loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Vytvoøit nový oddíl"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Poèáteèní sektor: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Velikost v MB: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Souborový systém: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Adresáø pøipojení (mount point): "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Nastavení: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-msgid "Remove the loopback file?"
-msgstr "Odstranit soubor loopbacku?"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Zmìnit typ oddílu"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "Pøepínám z ext2 na ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kam chcete pøipojit loopback %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nemù¾u smazat pøípojný bod, proto¾e tento oddíl je pou¾íván pro loopback.\n"
-"Odstraòte nejprve loopback"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Poèítám hranice souborového systému fat"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Mìním velikost"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Na tomto diskovém oddílu nelze mìnit velikost"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "V¹echna data z tohoto oddílu by mìla být zálohována"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Kdy¾ zmìníte velikost oddílu %s, ztratíte tím v¹echna jeho data"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Zvolte novou velikost"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "Nová velikost v MB: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Na který disk chcete oddíl pøesunout?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Na který sektor chcete oddíl pøesunout?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Pøesouvám"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Pøesouvám oddíl..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Zvolte existující RAID pro pøidání"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "nový"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Zvolte existující LVM pro pøidání"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "Jméno pro LVM?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Tento oddíl nemù¾e být pou¾it pro loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Název souboru loopbacku:"
-
-#: ../../diskdrake_interactive.pm_.c:736
-msgid "Give a file name"
-msgstr "Zadejte jméno souboru"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Soubor u¾ je pou¾íván jiným loopbackem, zvolte si jiný"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Soubor u¾ existuje. Mám ho pou¾ít?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "zaøízení"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "úroveò"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "Velikost bloku(chunk)"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Buïte opatrní: tato akce je nebezpeèná."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Jaký typ diskového oddílu?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Promiòte, nemù¾u povolit vytvoøení /boot tak daleko na disku (na cylindru > "
-"1024).\n"
-"Buïto pou¾ijete LILO a nebude to fungovat, nebo nepou¾ijete LILO a tedy "
-"nepotøebujete /boot"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Oddíl který jste zvolili jako koøenový (root - /) je na disku fyzicky za "
-"cylindrem 1024,\n"
-"a pøitom nemáte /boot oddíl. Jestli¾e chcete pou¾ít správce bootu (boot "
-"manager),\n"
-"pøidejte je¹tì /boot oddíl"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Zvolili jste softwarovou RAID oddíl jako koøenový oddíl (/).\n"
-"S tím se není schopný vypoøádat ¾ádný zavádìcí program bez pou¾ití oddílu\n"
-"/boot. Ujistìte se prosím, ¾e tento oddíl máte."
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Nová tabulka oddílù na disku %s bude zapsána!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Aby se zmìny uplatnily budete muset restartovat poèítaè"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Kdy¾ naformátujete oddíl %s, ztratíte tím v¹echna jeho data"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Formátuji"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formátuji soubor loopbacku %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formátuji oddíl %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Hide files"
-msgstr "Schovat soubory"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Move files to the new partition"
-msgstr "Pøesunout soubory na nový diskový oddíl"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Adresáø %s ji¾ obsahuje nìjaká data\n"
-"(%s)"
-
-#: ../../diskdrake_interactive.pm_.c:906
-msgid "Moving files to the new partition"
-msgstr "Pøesunuji soubory na nový diskový oddíl"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr "Kopíruji %s"
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, c-format
-msgid "Removing %s"
-msgstr "Odstraòuji %s"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Zaøízení: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Písmeno v DOSu: %s (jenom odhad)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Typ: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Jméno: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Zaèátek: sektor %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Velikost: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorù"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Od cylindru %d do cylindru %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Naformátovaný\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Nenaformátovaný\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Pøipojený\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback soubor(y): \n"
-"   %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Standardní startovací oddíl\n"
-"    (Pro MS-DOS, ne pro LILO)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Úroveò %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Velikost bloku(chunk) %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID disky %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback soubor: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Tento oddíl je oddíl\n"
-"s ovladaèi, je lep¹í\n"
-"no nechat neporu¹ený.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Tento speciální Boostrap\n"
-"oddíl je pro spu¹tìní\n"
-"dal¹ího systému.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Velikost: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s cylindrù, %s hlav, %s sektorù\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Informace: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM disky %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Typ tabulky oddílù: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na sbìrnici %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Volby: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formátování %s skonèilo chybou"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "nevím jak naformátovat %s na typ %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "chyba pøipojování"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "selhal bìh fsck s návratovým kódem %d nebo signálem %d"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "chyba pøipojování: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "chyba odpojování %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jednoduchý"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Nemù¾ete pou¾ít JFS pro oddíl men¹í ne¾ 16MB"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Nemù¾ete pou¾ít ReiserFS pro oddíl men¹í ne¾ 32MB"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Pøípojné body (mount points) musí zaèínat '/'"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Oddíl s pøípojným bodem %s u¾ existuje\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Nelze pou¾ít LVM Logického disku na pøipojený bod %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Tento adresáø musí kromì koøenového souborového systému zùstat"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Pro tento pøípojný bod potøebujete opravdový souborový systém (Ext2, "
-"ReiserFS)\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Chyba pøi otevírání %s pro zápis: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Stala se chyba - nebylo nalezeno ¾ádné zaøízení na kterém by se daly "
-"vytvoøit nové souborové systémy. Zkontrolujte prosím hardware"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Nemáte ¾ádné oddíly!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux je víceu¾ivatelský systém, co¾ znamená, ¾e ka¾dý u¾ivatel mù¾e "
-"mít\n"
-"své vlastní nastavení, soubory atd. Více se doètete v \"Pøíruèce u¾ivatele"
-"\".\n"
-"Na rozdíl od u¾ivatele root, který se správcem poèítaèe, u¾ivatelé, kteøí "
-"jsou\n"
-"zde vytvoøeni, nemají oprávnìní mìnit nic kromì svých souborù a nastavení.\n"
-"Doporuèuje se vytvoøit úèet pro minimálnì jednoho regulérního u¾ivatele.\n"
-"Tento úèet se pou¾ívá na v¹echny bì¾né úkoly. Aèkoliv je velmi praktické\n"
-"pøihla¹ovat se ka¾dý den jako u¾ivatel Root, je to také velmi nebezpeèné!\n"
-"Jedna malá chyba mù¾e zpùsobit to, ¾e celý operaèní systém nebude funkèní.\n"
-"Pokud udìláte chybu jako normální u¾ivatel, mù¾ete pøijít o soubory, ale "
-"nepo¹kodí\n"
-"se celý systém.\n"
-"\n"
-"Jako první zadejte reálné jméno. Není to povinné, tak¾e mù¾ete zadat co "
-"chcete\n"
-"a drakX pou¾ije první slovo jako u¾ivatelské jméno, pod kterým se bude "
-"u¾ivatel\n"
-"hlásit do systému. Je mo¾né ho následnì zmìnit. Dále se zadává heslo pro\n"
-"u¾ivatele. Volba hesla pro normální u¾ivatele sice není tak kritická jako\n"
-"pro správce, ale i tak se doporuèuje nepodceòovat bezpeènost.\n"
-"\n"
-"Pokud kliknete na \"Pøidat u¾ivatele\", mù¾ete tak pøidávat u¾ivatelù kolik\n"
-"potøebujete, napø. své pøátelé, úèet pro otce èi sestru. Pokud máte v¹echny\n"
-"u¾ivatele vytvoøeny, kliknìte na \"Hotovo\". \n"
-"\n"
-"Kliknutím na tlaèítko \"Roz¹íøené\" mù¾ete pro nový úèet zmìnit shell, "
-"který\n"
-"u¾ivatel bude pou¾ívat (výchozí je bash)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ka¾dý oddíl vypsaný ní¾e má: \"Jméno\", \"Velikost\".\n"
-"\n"
-"\"Jméno\" je slo¾eno následovnì: \"typ pevného disku\", \"èíslo disku\",\n"
-"\"èíslo oddílu\". (napøíklad \"hda1\").\n"
-"\n"
-"Pokud máte IDE disky, pak je \"typ pevného disku\" \"hd\", pokud máte SCSI,\n"
-"oznaèení bude \"sd\".\n"
-"\n"
-"\"Èíslo disku\" je v¾dy písmeno za \"hd\" nebo \"sd\". Pro IDE disky je "
-"takto:\n"
-"\n"
-" * \"a\" znamená \"master disk na primárním IDE øadièi\",\n"
-"\n"
-" * \"b\" znamená \"slave disk na primárním IDE øadièi\",\n"
-"\n"
-" * \"c\" znamená \"master disk na sekundárním IDE øadièi\",\n"
-"\n"
-" * \"d\" znamená \"slave disk na sekundárním IDE øadièi\".\n"
-"\n"
-"Pro SCSI disky platí, ¾e \"a\" je \"nejmen¹í SCSI ID\", \"b\" je \"druhé\n"
-"nejmen¹í SCSI ID\" atd."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Distribuce Mandrake Linux je slo¾ena z nìkolika CD. Instalaèní program ví,\n"
-"na kterém disku je umístìn jaký soubor a v pøípadì potøeby vysune CD a "
-"vy¾ádá\n"
-"si výmìnu CD za jiné."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"V této chvíli je mo¾né si vybrat, které programy chcete nainstalovat.\n"
-"Mandrake Linux obsahuje témìø tisíc balíèkù s programy a urèitì nebudete\n"
-"potøebovat v¹echny.\n"
-"\n"
-"Pokud instalujete z CDROM, budete nejprve dotázáni na to, jaká CD máte\n"
-"(pouze Expertní re¾im). Oznaète ty Cd, která máte a která chcete pou¾ít \n"
-"pro instalaci. Po výbìru kliknìte na \"OK\".\n"
-"\n"
-"Balíèky jsou rozdìleny do skupin, které odpovídají tomu, jak je nejèastìji\n"
-"poèítaè pou¾íván. Skupiny jsou umístìny do ètyøech sekcí:\n"
-"\n"
-" * \"Pracovní stanice\": pokud plánujete pou¾ívat poèítaè pøevá¾nì na\n"
-"bì¾nou práci, vyberte si z dal¹ích skupin odpovídající balíèky.\n"
-"\n"
-" * \"Vývoj\": pokud budete na poèítaèi programovat, mù¾ete si z této\n"
-"sekce vybrat dal¹í skupiny.\n"
-"\n"
-" * \"Server\": pokud bude poèítaè provozován jako server, máte mo¾nost\n"
-"vybrat si ty nejbì¾nìj¹í slu¾by, které chcete nainstalovat.\n"
-"\n"
-" * \"Grafická prostøedí\": pokud preferujete grafické prostøedí, zde je\n"
-"nabídka nìkolika prostøedí, ze které si musíte vybrat nejménì jedno,\n"
-"aby bylo mo¾né grafické prostøedí nainstalovat.\n"
-"\n"
-"Pokud pøejedete my¹í nad skupinou, objeví se krátký text, který vysvìtluje,\n"
-"co je obsahem dané skupiny.\n"
-"\n"
-"Pokud zatrhnete volbu \"Vlastní výbìr balíèkù\", zobrazí se seznam v¹ech\n"
-"balíèkù, které je mo¾no nainstalovat. Je to dobré v tom pøípadì, ¾e chcete\n"
-"mít kontrolu nad tím, co se bude instalovat.\n"
-"\n"
-"Pokud jste spustili instalaci v re¾imu \"Aktualizace\", mù¾ete zru¹it výbìr\n"
-"daných skupin, èím¾ zabráníte instalaci nových balíèkù. To je u¾iteèné\n"
-"pro pøípad opravy existujícího systému."
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"V závislosti na tom, zda jste zvolili individuální výbìt balíèkù, nabídne\n"
-"se stromová struktura, obsahující v¹echny balíèky organizované do skupin.\n"
-"Pøi procházení stromu mù¾ete vybrat jednotlivé balíèky nebo celé skupiny.\n"
-"\n"
-"Pokud vyberete balíèek nebo skupinu, v pravé èásti se objeví popis.\n"
-"Pokud máte výbìr hotový, kliknìte na tlaèítko \"Instalovat\", které spustí\n"
-"instalaèní proces. Doba trvání instalace závisí poètu balíèkù a na "
-"rychlosti\n"
-"va¹eho poèítaèe. Zbývající èas je zobrazován na obrazovce, tak¾e máte\n"
-"odhad na to, zda si stihnete dát ¹álek kávy. :-)\n"
-"\n"
-"Pokud mezi vybranými balíèky jsou serverové programy, zobrazí se dotaz na "
-"to,\n"
-"zda opravdu chcete tyto servery nainstalovat. V distribuci Mandrake Linux\n"
-"jsou tyto servery spu¹tìny pøi startu systému. I kdy¾ v dobì vydání "
-"distribuce\n"
-"nejsou známy ¾ádné bezpeènostní problémy, mohou se vyskytnout pozdìji.\n"
-"Pokud nevíte, k èemu jsou urèeny nìkteré serverové slu¾by, kliknìte na \"Ne"
-"\".\n"
-"Kliknutím na \"Ano\" se dané slu¾by nainstalují a spustí pøi startu!\n"
-"\n"
-"Volba \"Automatické závislosti\" odstraòuje varovné hlá¹ení, které se "
-"objeví\n"
-"v¾dy, kdy¾ vyberete balíèek, který má dal¹í závislosti a instalaèní program\n"
-"tak musí vybrat dal¹í potøebné balíèky.\n"
-"\n"
-"Malá ikonka diskety umo¾òuje nahrát ji¾ pøedtím vybraný seznam balíèkù.\n"
-"Kliknìte na ikonu a vlo¾te disketu s ulo¾eným výbìrem. V posledním kroku\n"
-"bude návod, jak si tuto disketu vytvoøit."
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Vyberte si, zda chcete pøipojit svùj poèítaè k místní síti nebo k "
-"internetu.\n"
-"Nejdøíve ale zapnìte pøíslu¹né zaøízení, aby ho DrakX mohl automaticky "
-"najít.\n"
-"\n"
-"Mandrake Linux dovoluje nastavit pøipojení k internetu ji¾ pøi instalaci.\n"
-"Zpùsoby pøipojení jsou: tradièní modem, ISDN modem, ADSL spojení, kabelový "
-"modem\n"
-"a koneènì klasické pøipojení do LAN sítì (Ethernet).\n"
-"\n"
-"Ujistìte se, ¾e máte v¹echny dostupné informace pro pøipojení od svého\n"
-"poskytovatele pøipojení nebo od správce sítì. \n"
-"\n"
-"Více informací naleznete v pøíslu¹né kapitole v manuálu, nebo mù¾ete systém\n"
-"nainstalovat a pou¾ít programy na konfiguraci pøipojení pozdìji.\n"
-"\n"
-"Pokud nemáte ¾ádné pøipojení k internetu ani k místní síti, kliknìte na\n"
-"\"Zru¹it\"."
-
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Nyní si zvolte, které slu¾by mají být spu¹tìny pøi startu poèítaèe.\n"
-"\n"
-"Je zde seznam v¹ech slu¾eb, které jsou aktuálnì nainstalovány.\n"
-"Prohlédnìte si seznam pozornì a zru¹te ty, které nepotøebujete spou¹tìt pøi\n"
-"startu poèítaèe.\n"
-"\n"
-"Pokud pøejedete my¹í nad nìkterou polo¾kou, objeví se malá nápovìda\n"
-"s popisem, co daná slu¾ba dìlá. Pokud pøesnì nevíte, zda je slu¾ba u¾iteèná\n"
-"nebo ne, je lep¹í ji nechat ve výchozím stavu.\n"
-"\n"
-"Rozva¾te, co za slu¾by spustit, zvlá¹tì pokud budete poèítaè provozovat\n"
-"jako server: nepotøebujete v¹echny slu¾by. Pamatujte, ¾e èím více slu¾eb\n"
-"je spu¹tìno, tím je vìt¹í nebezpeèí ne¾ádoucího proniknutí do poèítaèe.\n"
-"Tak¾e povolte opravdu jen ty slu¾by, které nezbytnì potøebujete."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux si ukládá informace o èase ve formátu GMT (Greenwich Manage Time)\n"
-"a pøekládá ho do místního èasu podle vybrané èasové zóny."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-"X Window System (zkrácenì X) je srdcem grafického rozhraní GNU/Linuxu,\n"
-"na kterém jsou provozovány grafická prostøedí (KDE,Gnome,AfterStep, "
-"WindowMaker)\n"
-"V této sekci se DrakX pokusí nakonfigurovat X automaticky.\n"
-"\n"
-"Existují pøípady, kdy se automatická detekce nezdaøí. Je to v pøípadech, ¾e\n"
-"je daný hardware velmi starý (nebo velmi nový). Pokud se detekce podaøí,\n"
-"spustí se grafické prostøedí v nejlep¹ím mo¾ném rozli¹ení v závislosti na "
-"monitoru.\n"
-"Probìhne test, kdy se zobrazí okno s otázkou, zda je správnì zobrazeno.\n"
-"\n"
-"Pokud provádíte \"expertní\" instalaci, spustí se prùvodce konfigurací X "
-"Window.\n"
-" Více informací o prùvodci naleznete v odpovídající sekci v manuálu.\n"
-"\n"
-"Pokud pøi testu nastavení uvidíte zprávu dobøe, odpovìzte \"Yes\" a "
-"instalace\n"
-"pokraèuje dal¹ím krokem.\n"
-"Pokud nic neuvidíte, test automaticky skonèí za 10 vteøin a obnoví se\n"
-"obrazovka."
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Mù¾e se stát, ¾e pøi prvním testu nebude zvoleno nejoptimálnìj¹í rozli¹ení\n"
-"(obrazovka je pøíli¹ malá, je posunuta doprava èi doleva...) V této chvíli "
-"se\n"
-"instalaèní program dotá¾e, jaké rozli¹ení si pøejete a nabídne seznam\n"
-"pou¾itelných rozli¹ení.\n"
-"\n"
-"Pokud se nepodaøí X Window korektnì spustit, vyberte se z nabídky \"Zmìnit"
-"\"\n"
-"grafickou kartu, vyberte \"Neznámá karta\" a pøi otázce na výbìr serveru "
-"odpovìzte\n"
-"\"FBDev\". Tato volba dovoluje pøi potí¾ích spustit X Window na v¹ech\n"
-"moderních grafických kartách. Potom \"Znova otestovat\" pro ovìøení."
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Poslední otázka je na to, zda chcete spustit grafické prostøedí pøi startu.\n"
-"Tato otázka se zobrazí i v pøípadì, ¾e nastavení pøedtím neotestujete.\n"
-"Je zøejmé, ¾e odpovíte \"Ne\" v pøípadì, ¾e poèítaè bude pracovat\n"
-"jako server nebo v pøípadì, ¾e se nepodaøilo správnì nastavit grafickou "
-"kartu."
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"CDROM s distribucí Mandrake Linux má zabudovaný záchranný re¾im. Mù¾ete ho\n"
-"spustit pøímo pøi spu¹tìní z CD, kdy stisknete klávesu >>F1<< a na "
-"pøíkazový\n"
-"øádek napí¹ete >>rescue<<. Pokud poèítaè neumo¾òuje bootovat z CD, potom\n"
-"v tomto kroku najdete øe¹ení na následující situace:\n"
-"\n"
-" * pokud pou¾íváte zavádìcí program, DrakX pøepí¹e zavádìcí sektor (MBR) na\n"
-"pevném disku (pokud nepou¾íváte jiný zavádìcí program) aby umo¾nil start "
-"buï\n"
-"Windows nebo GNU/Linuxu (pokud máte Windows na poèítaèi nainstalovány).\n"
-"Pokud potøebujete Windows pøeinstalovat, instalaèní program Microsoftu "
-"pøepí¹e\n"
-"zavádìcí sektor a nemáte tak mo¾nost spustit GNU/Linux!\n"
-"\n"
-" * pokud se objeví problémy a není mo¾né spustit GNU/Linux z pevného disku,\n"
-"je disketa jedinou mo¾ností, jak systém spustit. Obsahuje základní "
-"systémové\n"
-"nástroje na obnovení systému buï pøí výpadku napájení, chybì v hesle nebo\n"
-"z jiných dùvodù.\n"
-"\n"
-"Pokud zvolíte tento krok, musíte vlo¾it disketu do mechaniky. Disketa musí "
-"být\n"
-"prázdná, nebo na ní mohou být data, která ji¾ nepotøebujete. následnì se "
-"provede\n"
-"formát diskety a DrakX celý její obsah pøepí¹e."
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"V tomto bodì si musíte definovat, na které diskové oddíly budete\n"
-"instalovat nový operaèní systém Mandrake Linux. Pokud je disk prázdný\n"
-"nebo existující operaèní systém pou¾ívá celý disk, je nutné ho rozdìlit.\n"
-"Rozdìlení disku spoèívá ve vytvoøení volného prostoru pro instalaci\n"
-"systému Mandrake Linux.\n"
-"\n"
-"Proto¾e rozdìlení disku je nenávratná operace, je to velmi nebezpeèná\n"
-"akce pro ty u¾ivatele, kteøí nemají ¾ádné zku¹enosti.\n"
-"Pro tyto u¾ivatele je dobrý prùvodce, který zjednodu¹í daný proces.\n"
-"Je¹tì pøed zapoèetím rozdìlování disku si proètìte manuál.\n"
-"\n"
-"Pokud máte zvolený Expertní re¾im, spustil se nástroj na práci s diskem: "
-"Diskdrake, který umo¾òuje lépe nastavit diskové oddíly. Pokud chcete pou¾ít\n"
-"prùvodce, kliknìte na tlaèítko \"Prùvodce\".\n"
-"\n"
-"Pokud máte ji¾ vytvoøeny diskové oddíly z pøedchozích instalací nebo\n"
-"od jiných diskových nástrojù, lze je nyní pou¾ít pro instalaci.\n"
-"\n"
-"Pokud nejsou definovány ¾ádné diskové oddíly, je nutné je vytvoøit.\n"
-"K tomu slou¾í prùvodce, který nabídne nìkolik øe¹ení:\n"
-"\n"
-" * \"Pou¾ít volný prostor\": takto se jednodu¹e automaticky disk(y) rozdìlí "
-"a ji¾\n"
-"se o nic nemusíte starat.\n"
-"\n"
-" * \"Pou¾ít existující oddíly\": prùvodce detekoval jeden nebo více "
-"existujících\n"
-"Linuxových oddílù a ty nabídne pro instalaci.\n"
-"\n"
-" * \"Pou¾ít volné místo na oddíle s Windows\": pokud máte na disku "
-"nainstalovány\n"
-"Microsoft Windows a zabírají celý disk, je mo¾né tento prostor zmen¹it \n"
-"a pou¾ít ho pro instalaci. Zmìna velikost oddílu je provedena bez ztráty "
-"dat.\n"
-"Tento postup je doporuèený, pokud chcete na disku provozovat jak systém\n"
-"Linux Mandrake tak i Microsoft Windows.\n"
-"\n"
-"   Pøed touto volbou si uvìdomte, ¾e velikost oddílu s Microsoft Windows\n"
-"bude men¹í ne¾ je nyní. To znamená, ¾e budete mít ménì místa pro \n"
-"instalaci programù do Microsoft Windows.\n"
-"\n"
-" * \"Zru¹it celý disk\": pokud chcete smazat ve¹kerá data a v¹echny oddíly\n"
-"na disku a pou¾ít je pro instalaci systému Mandrake Linux, vyberte toto\n"
-"øe¹ení. Zde postupujte opatrnì, po výbìru ji¾ není mo¾né vzít volbu zpìt.\n"
-"\n"
-"   !! Pokud zvolíte tuto mo¾nost, v¹echna data na disku budou ztracena.!!\n"
-" * \"Odstranit Windows\": takto se jednodu¹e sma¾e celý disk a bude se "
-"instalovat\n"
-"na celý disk- V¹echna data tak budou ztracena.\n"
-"\n"
-"    !! Pokud vyberete tuto volbu, ve¹kerá data budou ztracena. !!\n"
-"\n"
-" * \"Expertní re¾im\": pokud chcete disk rozdìlit ruènì. Pøed touto volbou "
-"buïte\n"
-"opatrní, je sice mocná, ale nebezpeèná.\n"
-"Nedoporuèuje se tìm, kteøí pøesnì nevìdí, co dìlají."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Nyní je instalace ukonèena a operaèní systém GNU/Linux je pøipraven k "
-"pou¾ití.\n"
-"Kliknìte na \"OK\" a systém bude restartován. Potom mù¾ete spustit GNU/Linux "
-"nebo\n"
-"Windows, zále¾í který preferujete\n"
-"\n"
-"Tlaèítko \"Roz¹íøené\" zobrazí dal¹í dvì tlaèítka:\n"
-"\n"
-" * Generovat disketu pro automatickou instalaci: vytvoøí disketu, se kterou\n"
-"lze celou instalaci opakovat bez zásahu operátora se stejnými volbami,\n"
-"které byly zvoleny pøi instalaci.\n"
-"\n"
-"    Po kliknutí na toto tlaèítko se zobrazí dal¹í dvì volby:\n"
-"\n"
-"     * : Zopakovat: je to èásteènì automatická instalace, kdy se potvrzuje "
-"krok\n"
-"pøi rozdìlování diskù (a pouze tento krok).\n"
-"\n"
-"    * : Automaticky: plnì automatická instalace, data na pevném disku budou\n"
-"zru¹ena a disk pøepsán.\n"
-"\n"
-"   Tato volba je velmi u¾iteèná, kdy¾ potøebujete nainstalovat vìt¹í poèet\n"
-"stejných poèítaèù. Více o této mo¾nosti je na na¹ich WWW stránkách.\n"
-"\n"
-" * Ulo¾it výbìr balíèkù(*): ulo¾í výbìr balíèkù, který byl zvolen pøi "
-"instalaci.\n"
-"Pokud budete instalovat dal¹í poèítaè, vlo¾te disketu do mechaniky a "
-"spus»te\n"
-"instalaci, stisknìte [F1] a napi¹te na pøíkazový øádek >linux defcfg=\"floppy"
-"\"<.\n"
-"\n"
-"(*) Potøebujete disketu formátovanou FAT (Pod Linuxem ji vytvoøíte pøíkazem\n"
-"\"mformat a:\")"
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Ka¾dý novì vytvoøený diskový oddíl musí být pøed pou¾itím zformátován\n"
-"(formátováním se myslí vytvoøení souborového systému).\n"
-"\n"
-"Nyní lze formátovat ji¾ existující diskové oddíly pro vymazání\n"
-"v¹ech dat, která obsahují. Pokud to chcete provést, vyberte diskové oddíly\n"
-"pro pøeformátování.\n"
-"\n"
-"Není ale nutné pøeformátovat v¹echny ji¾ existující diskové oddíly.\n"
-"Je nutné pøeformátovat oddíly, které obsahují operaèní systém (jako je \"/"
-"\",\n"
-"\"/usr\" nebo \"/var\") ale není nutné pøeformátovat oddíly, které obsahují\n"
-"data, která chcete zachovat (typicky /home).\n"
-"\n"
-"Pøi výbìru diskových oddílù, které se budou formátovat buïte opatrní, "
-"v¹echna\n"
-"data na formátovaných oddílech budou ztracena a nelze je ji¾ obnovit.\n"
-"\n"
-"Pokud je v¹e pøipraveno pro formátování, kliknìte na \"OK\".\n"
-"\n"
-"Kliknìte na \"Zru¹it\" pokud chcete vybrat jiné oddíly pro instalaci\n"
-"systému Mandrake Linux.\n"
-"\n"
-"Kliknutím na \"Roz¹íøené\" mù¾ete vybrat, které oddílz budou otestovány\n"
-"na vadné bloky."
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Nyní zaène nová instalace operaèního systému Mandrake Linux.\n"
-"Tato operace mù¾e trvat nìkolik desítek minut (zále¾í na mno¾ství balíèkù,\n"
-"které jste si vybrali pro instalaci a rychlosti va¹eho poèítaèe).\n"
-"\n"
-"Mìjte prosím trpìlivost a vyèkejte."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"Pøedtím, ne¾ budete pokraèovat, pøeètìte si pozornì podmínky licence. Ty\n"
-"se vztahují k celé distribuci Mandrake Linux a pokud s nimi nesouhlasíte,\n"
-"kliknìte na tlaèítko \"Odmítnout\". Instalace ihned skonèí. Pokud chcete "
-"pokraèovat\n"
-"v instalaci, kliknìte na tlaèítko \"Potvrdit\"."
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Nyní si vyberte úroveò zabezpeèení va¹eho poèítaèe Je zøejmé, ¾e èím více "
-"je\n"
-"poèítaè vyu¾íván a èím cennìj¹í data obsahuje, tím je potøeba zvolit vy¹¹í\n"
-"úroveò. Na druhou stranu, vy¹¹í úroveò znesnadòuje nìkteré obvyklé postupy.\n"
-"Více informací o úrovních bezpeènosti se doètete v kapitole MSEC v "
-"referenèní\n"
-"pøíruèce. \n"
-"Pokud nevíte co vybrat, ponechte výchozí nastavení."
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"V této chvíli je potøebné urèit, který(é) oddíl(y) budou pou¾ity pro "
-"instalaci\n"
-"systému Mandrake Linux. Pokud byly oddíly ji¾ jednou definovány, buï\n"
-"z pøedchozí instalace GNU/Linux nebo jiným programem na rozdìlení disku,\n"
-"je mo¾né pou¾ít právì tyto oddíly. Jinak musí být oddíly novì definovány.\n"
-"\n"
-"Pro vytvoøení oddílu musíte nejdøíve vybrat pevný disk. Kliknìte na \"hda"
-"\",\n"
-"co¾ je první IDE disk, nebo na \"hdb\", co¾ je druhý disk, pøípadnì na \"sda"
-"\",\n"
-"co¾ je první SCSI disk.\n"
-"\n"
-"Pro rozdìlení vybraného disku mù¾ete pou¾ít tyto volby:\n"
-"\n"
-" * \"V¹e smazat\": tato volba sma¾e v¹echny oddíly na disku.\n"
-"\n"
-" * \"Automaticky rozmístit\": dojde k automatickému vytvoøení oddílu pro "
-"Ext2\n"
-"a swap ve volném prostoru disku.\n"
-"\n"
-" * \"Záchrana tabulky oddílù\": pokud je tabulka po¹kozena, mù¾ete se "
-"pokusit\n"
-"ji opravit. Buïte ale opatrní a pamatujte, ¾e se to nemusí v¾dy podaøit.\n"
-"\n"
-" * \"Odvolat\": zru¹í v¹echny provedené zmìny.\n"
-"\n"
-" * \"Znovu naèíst\": zru¹í v¹echny zmìny a nahraje pùvodní tabulku oddílù.\n"
-"\n"
-" * \"Prùvodce\": pokud nemáte dobré znalosti o rozdìlování diskù, pou¾ijte\n"
-"tuto volbu, kdy se spustí prùvodce.\n"
-"\n"
-" * \"Obnovit z diskety\": obnoví tabulku oddílù, která byla ji¾ døíve "
-"ulo¾ena\n"
-"na disketu.\n"
-"\n"
-" * \"Ulo¾it na disketu\": ulo¾í tabulku oddílù na disketu. To je vhodné\n"
-"pro pøípad po¹kození tabulky, kdy ji lze z této zálohy obnovit. "
-"Doporuèujeme\n"
-"vyu¾ít tuto mo¾nost.\n"
-"\n"
-" * \"Hotovo\": pokud máte disk rozdìlen, ulo¾í se zmìny na disk.\n"
-"\n"
-"Poznámka: ka¾dou volbu je mo¾né zadat také z klávesnice. Mezi oddíly se\n"
-"mù¾ete pohybovat pomocí kláves [Tab] a [©ipka nahoru/¹ipka dolù].\n"
-"\n"
-"Pokud je vybrán oddíl, lze pou¾ít tyto volby:\n"
-"\n"
-" * Ctrl-c pro vytvoøení nového oddílu (pokud je vybrán prázdný oddíl);\n"
-"\n"
-" * Ctrl-d pro smázání oddílu;\n"
-"\n"
-" * Ctrl-m pro zadání bodu pøipojení.\n"
-"\n"
-"Pokud instalujete na poèítaè PPC, je potøeba vytvoøit malý oddíl HPFS,\n"
-"tzv. \"bootstrap\" o minimální velikosti 1MB, který bude pou¾it pro zavadìè\n"
-"yaboot. Pokud vytvoøíte tento oddíl vìt¹í, napø. 50 MB, je to dobré místo "
-"pro\n"
-"ulo¾ení ramdisku a jádra pro situace záchrany disku."
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Instalaèní program nalezl na disku více ne¾ jeden oddíl s Microsoft "
-"Windows.\n"
-"Prosím vyberte si jeden z nich, který je potøeba zmen¹it pro novu instalaci\n"
-"systému Mandrake Linux.\n"
-"\n"
-"Ka¾dý oddíl je zobrazen následovnì: \"Jméno pro Linux\",\n"
-"\"Jméno pro Windows\", \"Velikost\".\n"
-"\n"
-"\"Jméno pro Linux\" je slo¾eno následovnì: \"typ pevného disku\",\n"
-"\"èíslo disku\", \"èíslo oddílu\". (napøíklad \"hda1\").\n"
-"\n"
-"Pokud máte IDE disky, pak je \"typ pevného disku\" \"hd\", pokud máte SCSI,\n"
-"oznaèení bude \"sd\".\n"
-"\n"
-"\"Èíslo disku\" je v¾dy písmeno za \"hd\" nebo \"sd\". Pro IDE disky je "
-"takto:\n"
-"\n"
-" * \"a\" znamená \"master disk na primárním IDE øadièi\",\n"
-"\n"
-" * \"b\" znamená \"slave disk na primárním IDE øadièi\",\n"
-"\n"
-" * \"c\" znamená \"master disk na sekundárním IDE øadièi\",\n"
-"\n"
-" * \"d\" znamená \"slave disk na sekundárním IDE øadièi\".\n"
-"\n"
-"Pro SCSI disky platí, ¾e \"a\" je \"nejmen¹í SCSI ID\", \"b\" je \"druhé\n"
-"nejmen¹í SCSI ID\" atd.\n"
-"\n"
-"\"Jméno pro Windows\" je písmeno, které je pou¾ito ve Windows\n"
-"(první oddíl nebo disk má písmeno \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Buïte trpìliví. Tato operace mù¾e trvat nìkolik minut."
-
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Nyní se instalaèní program zeptá na to, zda chcete provést (\"Doporuèenou"
-"\")\n"
-"nebo (\"Expertní\") instalaci, která dovoluje vìt¹í kontrolu.\n"
-"Také si zde mù¾ete vybrat, zda chcete provést novou instalaci nebo "
-"aktualizaci\n"
-"ji¾ existující verze systému Mandrake Linux. Mù¾ete provést novou instalaci\n"
-"pøes existující, která ji kompletnì pøema¾e. Také lze provést aktualizaci\n"
-"v pøípadì nutnosti opravy instalovaného systému.\n"
-"\n"
-"Vyberte si volbu \"Instalovat\" pokud nemáte instalovánu ¾ádnou pøedchozí\n"
-"verzi systému Mandrake Linux nebo chcete pou¾ívat více operaèních systémù.\n"
-"\n"
-"Zvolte \"Aktualizovat\" pokud chcete aktualizovat pøedchozí verzi distribuce "
-"Mandrake Linux.\n"
-"\n"
-"V závislosti na va¹ich znalostech GNU/Linuxu si mù¾ete vybrat z "
-"následujících\n"
-"úrovní instalace nebo aktualizace operaèního systému Mandrake Linux:\n"
-"\n"
-"* Doporuèená: volte pokud jste je¹tì nikdy neinstalovali GNU/Linux. "
-"Instalace bude velmi jednoduchá a budete dotázáni pouze na nìkolik otázek.\n"
-"\n"
-"* Expertní: jestli¾e jste dobøe obeznámeni s GNU/Linuxem a chcete provést\n"
-"precizní nastavení instalace, je právì pro vás tato volba. Budete si moci\n"
-"pøesnì upravit celou instalaci.\n"
-"Odpovìdi na otázky budou velmi tì¾ké pro ty, kteøí nemají velmi dobré "
-"znalosti GNU/Linuxu.\n"
-"Nevolte tuto volbu, pokud pøesnì nevíte, co dìláte."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normálnì instalaèní program zvolí správnou klávesnici na základì zvoleného\n"
-"jazyka, tak¾e není potøeba nic v tomto kroku mìnit. \n"
-"Mù¾e se ale stát, ¾e nemáte klávesnici, která odpovídá va¹emu jazyku: "
-"napøíklad\n"
-"pokud jste anglicky hovoøící ©výcar, stejnì chcete mít ¹výcarskou "
-"klávesnici.\n"
-"Nebo pokud mluvíte anglicky ale ¾ijete v Quebecu, je to stejný pøípad. V "
-"obou\n"
-"pøípadech se mù¾ete na tento instalaèní krok a vybrat si odpovídající\n"
-"klávesnici ze seznamu.\n"
-"\n"
-"Pokud máte klávesnici pro jiný jazyk, kliknìte na tlaèítko \"Více\"\n"
-"a zobrazí se kompletní seznam v¹ech podporovaných rozlo¾ení klávesnic."
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-"Vyberte si prosím vámi preferovaný jazyk, který se bude pou¾ívat pøi "
-"instalaci\n"
-"a v celém systému.\n"
-"\n"
-"Tlaèítko \"Roz¹íøené\" umo¾òuje zvolit dal¹í jazyky, které budou také "
-"nainstalovány\n"
-"a mù¾ete je pou¾ít v systému. Pokud napøíklad na poèítaèi pracují obèas "
-"lidé\n"
-"ze ©panìlska, vyberte angliètinu jako hlavní jazyk a pod tlaèítkem "
-"roz¹íøené\n"
-"zatrhnìte volbu \"©panìl¹tina\".\n"
-"\n"
-"Pokud máte jazyk vybrán, kliknìte na \"OK\" a instalace bude pokraèovat\n"
-"dal¹ím krokem."
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-"DrakX zjistil, ¾e máte dvou tlaèítkovou my¹ a nastaví emulaci pro tøetí "
-"tlaèítko.\n"
-"Taky umí rozpoznat, zda je my¹ PS/2, USB nebo sériová.\n"
-"\n"
-"Pokud chcete zadat jiný typ my¹i, vyberte odpovídající typ se seznamu.\n"
-"\n"
-"Pokud vyberete jinou my¹ ne¾ ta, která byla detekována, zobrazí se "
-"testovací\n"
-"obrazovka. Zde otestujte jak tlaèítka tak i koleèko, zda je nastavení "
-"správné.\n"
-"Pokud my¹ nepracuje správnì, stisknìte mezerník nebo ENTER na \"Zru¹it\"\n"
-"a vyberte jiný typ."
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Vyberte prosím správný port. Napøíklad COM1 pod MS Windows se\n"
-"v Linuxu jmenuje ttyS0."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Následující rozhodnutí je jedním z tìch, které ovlivòují celkovou "
-"bezpeènost\n"
-"systému GNU/Linux, tj. volba hesla pro u¾ivatele \"Root\". Root je "
-"administrátorem\n"
-"systému, je odpovìdný za provádìní aktualizací, pøidávání u¾ivatelù a také\n"
-"za celkovou konfiguraci systému. Zkrácenì: root mù¾e úplnì v¹echno!\n"
-"To je také dùvodem, proè se heslo volí takové, aby se nedalo lehce uhodnout\n"
-"a instalaèní program zkontroluje, zda není pøíli¹ jednoduché. Jak vidíte, "
-"je\n"
-"mo¾né mít úèet bez hesla, ale velmi dùraznì doporuèujeme nìjaké heslo "
-"zadat,\n"
-"z jednoho dùvodu. Nemyslete si, ¾e pokud spustíte GNU/Linux, ¾e nemù¾ete\n"
-"udìlat u¾ ¾ádnou chybu. U¾ivatel root mù¾e nenávratnì po¹kodit celý systém,\n"
-"vymazat potøebné soubory, atd.\n"
-"\n"
-"Zvolené heslo by se mìlo skládat ze znakù a èíslic a melo by být minimálnì "
-"8\n"
-"znakù dlouhé. Také není dobré si ho kamkoliv poznamenávat.\n"
-"\n"
-"Nevolte heslo pøíli¹ dlouhé nebo komplikované, bude nutné si jej pamatovat.\n"
-"\n"
-"Heslo se zadává dvakrát pro ovìøení toho, zda nedo¹lo k pøeklepu pøi prvním\n"
-"pokusu. Tak je mo¾né heslo opravit a zadat dvakrát stejné.\n"
-"\n"
-"V expertním re¾imu budete dotázáni na to, zda se má pou¾ít autentikaèní\n"
-"server, jako je NIS nebo LDAP.\n"
-"\n"
-"Pokud se ve va¹í síti pou¾ívá protokol LDAP (nebo NIS) pro ovìøování\n"
-"u¾ivatelù, vyberte \"LDAP\" (nebo \"NIS\"). Pokud o tom nic nevíte,\n"
-"zeptejte se administrátora sítì.\n"
-"\n"
-"Pokud není poèítaè pøipojen do ¾ádné administrované sítì, zvolte\n"
-"\"Lokální soubory\" pro autentikaci."
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-"LILO a GRUB jsou zavadìèe systému. Tato èást je normálnì plnì automatická.\n"
-"DrakX analyzuje boot sektor a zachová se podle toho, co nalezne:\n"
-"\n"
-" * pokud nalezne boot sektor Windows, pøepí¹e ho sektorem pro LILO/GRUB aby\n"
-"bylo mo¾né spou¹tìt jak Windows tak i Linux;\n"
-"\n"
-" * pokud nalezne boot sektor pro LILO nebo GRUB, tak jej pøepí¹e.\n"
-"\n"
-"Pokud jsou nìjaké pochybnosti, je zobrazen dialog s výbìrem mo¾ností.\n"
-"\n"
-" * \"Jaký spou¹tìè pou¾ít:\" je mo¾né si vybrat:\n"
-"\n"
-"    * LILO s grafickou nabídkou: pokud preferujete LILO s grafickým "
-"rozhraním.\n"
-"\n"
-"    * LILO s textovou nabídkou: pokud preferujete textové rozhraní.\n"
-"\n"
-"    * Grub: pokud preferujete textovou verzi zavadìèe Grub.\n"
-"\n"
-"    * Spou¹tìcí zaøízení: ve vìt¹inì pøípadù není nutné mìnit výchozí "
-"nastavení\n"
-"(/dev/hda), ale lze nainstalovat zavadìè na druhý disk (/dev/hdb)\n"
-"nebo dokonce na disketu (/dev/fd0).\n"
-"\n"
-" * Prodleva pøes spu¹tìním: pokud zapnete poèítaè, je tímto èasem umo¾nìno\n"
-"u¾ivateli vybrat si jiný systém z nabídky ne¾ bude zaveden výchozí systém.\n"
-"\n"
-"!! Vyvarujte se pokusù o to nenainstalovat zavadìè (vybráním volby Zru¹it),\n"
-"proto¾e by mìl existovat zpùsob, jak spustit Mandrake Linux!\n"
-"Také si dobøe rozmyslete, jaké zmìny zde provádíte !!\n"
-"\n"
-"Kliknutím na tlaèítko \"Roz¹íøené\" se dialog roz¹íøí o dal¹í mo¾nosti,\n"
-"vyhrazené pro znalé u¾ivatele.\n"
-"\n"
-"Mandrake Linux nainstaluje svùj vlastní zavadìè, který dovoluje spou¹tìt "
-"vlastní\n"
-"systém stejnì jako dal¹í operaèní systémy.\n"
-"\n"
-"Pokud máte jiný operaèní systém ji¾ na poèítaèi, automaticky ho zaøadí do\n"
-"nabídky pro spou¹tìní. Zde je mo¾né dále doladit volby, které se pøedávají "
-"tím,\n"
-"¾e na danou nabídkou dvakrát poklepete, lze také pøidat dal¹í nabídku\n"
-"èi danou nabídku odebrat. K dal¹ímu kroku se dostanete kliknutím na \"Hotovo"
-"\"."
-
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) a GRUB jsou zavadìèe systému, které mohou spustit\n"
-"buï GNU/Linux nebo jiný operaèní systém nainstalovaný na poèítaèi.\n"
-"Ve vìt¹inì pøípadù jsou tyto systému správnì detekovány. Pokud se tak "
-"nestane,\n"
-"máte mo¾nost je ruènì pøidat v této obrazovce. Vìnujte opatrnost "
-"parametrùm,\n"
-"které zadáváte.\n"
-"\n"
-"Pokud nechcete umo¾nit pøístup k tìmto operaèním systémùm komukoliv, mù¾ete\n"
-"je z nabídky odstranit. Ale v tom pøípadì musíte mít spou¹tìcí disketu, ze "
-"které\n"
-"je mo¾né tento operaèní systém spustit!"
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Zde se musíte rozhodnout, kam umístit informace potøebné pro spu¹tìní "
-"systému\n"
-"GNU/Linux.\n"
-"\n"
-"Pokud pøesnì nevíte co zadat, ponechte \"První sektor na disku (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Zde si mù¾ete vybrat tiskový systém, který budete pou¾ívat. Jiné OS "
-"nabízejí\n"
-"jeden, Mandrake nabízí tøi.\n"
-"\n"
-" * \"pdq\" - co¾ znamená 'print, don't queue' a je vhodný tehdy, pokud "
-"nemáte\n"
-"¾ádné sí»ové tiskárny. Zvládá pouze nìkolik mo¾ností a tisk na nìj ze sítì "
-"je\n"
-"velmi pomalý. Tuto volbu lze po instalaci zmìnit spu¹tìním nástroje "
-"PrinterDrake\n"
-"z øídícího centra Mandrake, pokud kliknete na tlaèítko Expert.\n"
-"\n"
-" * \"CUPS\" - 'Common Unix Printing System' je vynikající v tisku na "
-"lokální\n"
-"tiskárny. Je jednoduchý a mù¾e fungovat jako klient i server pro klienty z "
-"\"lpd\"\n"
-"systému, tak¾e je s nimi kompatibilní. Je mo¾né nastavit spoustu voleb,\n"
-"ale základní nastavení je velmi jednoduché. Pokud potøebujete emulovat \"lpd"
-"\"\n"
-"server, staèi spustit démona \"cups-lpd\". Má také grafické prostøedí pro "
-"tisk\n"
-"a nastavení tiskárny.\n"
-"\n"
-" * \"lprNG\" - 'line printer daemon New Generation'. Tento systém doká¾e to\n"
-"co ostatní, ale umí tisknout na tiskárny pøipojené k Novell Netware, "
-"proto¾e\n"
-"podporuje IPX protokol a také umí zpracovat pøímo tiskové pøíkazy. Pokud\n"
-"potøebujete tisk na tiskárnách ze sítì Novell nebo tiskový systém bez "
-"zvlá¹tní\n"
-"tiskové fronty, vyberte si lprNG.\n"
-"Jinak je preferován CUPS, proto¾e je jednodu¹¹í a lépe pracuje v sítích."
-
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX se nejdøíve pokusí najít v¹echny pevné disky v poèítaèi. Také se "
-"pokusí\n"
-"najít PCI SCSI adaptér(y). Pokud nìjaký(é) najde, automaticky nainstaluje\n"
-"správný ovladaè.\n"
-"\n"
-"Pokud ¾ádný nanajde, budete dotázáni, zda vùbec máte nìjaký SCSI adaptér.\n"
-"Odpovìzte \"Ano\" a vyberte si se seznamu adaptérù nebo odpovìzte \"Ne\","
-"jestli¾e ¾ádný adaptér nemáte.\n"
-"Pokud pøesnì nevíte jaký máte, mù¾ete to zjistit kliknutím na tlaèítko\n"
-"\"Zobrazit informace o hardware\".\n"
-"\n"
-"Pokud si vyberete ovladaè, DrakX se zeptá, zda pro nìj chcete zadat nìjaké\n"
-"informace. DrakX se pokusí inicializovat hardware s volbami, které jsou "
-"potøeba.\n"
-"Vìt¹inou to funguje dobøe.\n"
-"\n"
-"Pokud to nebude fungovat, budete muset zadat dal¹í informace pro ovladaè.\n"
-"Pro dal¹í nápovìdu se podívejte do instalaèní pøíruèky (kapitola 3 "
-"\"Získání\n"
-"informací o hardware\"), kde je popsáno, jak získat tyto informace z "
-"Windows\n"
-"(pokud je máte na poèítaèi), z dokumentace k hardware, nebo z internetové\n"
-"stránky výrobce (pokud máte pøístup k internetu."
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Pro yaboot, pro dal¹í operaèní systémy, pro alternativní jádra nebo pro "
-"záchranný\n"
-"disk lze zde zadat dal¹í parametry.\n"
-"\n"
-"Pro jiné OS je mo¾né zadat pouze název a hlavní oddíl.\n"
-"\n"
-"Pro Linux je nìkolik dal¹ích mo¾ností:\n"
-"\n"
-" * Jmenovka: je to jednoduché jméno, které mù¾ete napsat do pøíkazového\n"
-"øádku pro yaboot pro zvolení daného systému.\n"
-"\n"
-" * Obraz: je to jmého jádra, ze kterého se spustí systém. Typicky je to "
-"vmlinux\n"
-"èi obdoba slova vmlinux s pøíponami.\n"
-"\n"
-" * Root: koøenové zeøízení \"/\" pøi instalaci Linuxu.\n"
-"\n"
-" * Pøidat volby: na poèítaèích Apple potøebuje jádro dal¹í parametry, aby "
-"se\n"
-"správnì nastavil hardware pro video, èi provedla emulace tlaèítek my¹i\n"
-"na klávesnici, proto¾e my¹ u poèítaèe Apple nemá druhé a tøetí tlaèítko.\n"
-"Zde jsou nìjaké pøíklady:\n"
-"\n"
-"        video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"        video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: tato volba je urèena moduly, které se musí nahrát do pamìti "
-"je¹tì\n"
-"døíve, ne¾ je pøístupný spou¹tìcí oddíl, èi v pøípadì opravy systému.\n"
-"\n"
-" * Velikost initrd: výchozí velikost ramdisku je 4,096 bytù. Pokud "
-"potøebujete\n"
-"vìt¹í velikost, zadejte sem potøebnou hodnotu.\n"
-"\n"
-" * Read-write: be¾nì je \"root\" oddíl pøipojen nejdøíve v re¾imu pouze pro\n"
-"ètení, aby se provedlo otestování systému pøed tím, ne¾ se pou¾ije pro bìh.\n"
-"Zde je mo¾né toto chování zmìnit.\n"
-"\n"
-" * Bez grafiky: grafické zaøízení na poèítaèích Apple je nìkdy "
-"problematické\n"
-"a tak je mo¾né zadat tuto volbu a zvolit nativní podporu.\n"
-"\n"
-" * Výchozí: zvolí tuto polo¾ku jako výchozí pro výbìr z nabídky, kdy staèí\n"
-"pouze stisknout ENTER a spustí se. Tato polo¾ka je oznaèena \"*\" a v¹echny\n"
-"výbìry se zobrazí po stisknutí tlaèítka [Tab]."
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot je zavadìè pro poèítaèe MacIntosh. Umo¾òuje spou¹tìt jak GNU/Linux, "
-"MacOS tak i MacOSX, pokud jsou na poèítaèi nainstalovány. Ve vìt¹inì\n"
-"pøípadù jsou tyto operaèní systémy správnì detekovány. Pokud nejsou, mù¾ete\n"
-"zde na této obraovce pøidat záznamy ruènì. Dejte si ale pozor na správnou\n"
-"volbu parametrù.\n"
-"\n"
-"Yaboot má tyto hlavní volby:\n"
-"\n"
-" * Úvodní hlá¹ka: jednoduchá textová zpráva, která je zobrazena pøed "
-"výzvou.\n"
-"\n"
-" * Spou¹tìcí zaøízení: udává místo, kde jsou informace potøebné pro "
-"spu¹tìní\n"
-"GNU/Linuxu. Obyèejnì je to bootstrap oddíl, který byl vytvoøen ji¾ pøedtím.\n"
-"\n"
-" * Prodleva pro Firmware: narozdíl od zavadìèe LILO jsou zde dvì prodlevy.\n"
-"První prodleva v sekundách umo¾òuje zvolit mezi spu¹tìním CD, OF boot,\n"
-"MacOS nebo Linuxu.\n"
-"\n"
-" * Prodleva pro jádro: tato prodleva je podobná prodlevì pro LILO.\n"
-"Udává v násobcích 0,1 vteøiny jak dlouho se èeká, ne¾ se zavede \n"
-"výchozí jádro.\n"
-"\n"
-" * Povolit spu¹tìní z CD?: tato volba dovoluje pou¾ít \"C\" pro spu¹tìní "
-"CD.\n"
-"\n"
-" * Povolit OF Boot?: tato volba dovoluje pou¾ít \"N\" pro spu¹tìní Open "
-"Firm.\n"
-"\n"
-" * Výchozí OS: vyberte výchozí OS, který se spustí po uplynutí prodlevy."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-"Zde jsou shromá¾dìny rùzné informace, které se vztahují k tomuto poèítaèi.\n"
-"V závislosti na tom, zda je èi není pøítomen daný hardware, mù¾ete ale\n"
-"nemusíte, vidìt tyto polo¾ky: \n"
-"\n"
-" * My¹: pokud je zji¹tìna my¹, mù¾ete zde zmìnit její nastavení.\n"
-"\n"
-" * Klávesnice: kliknutím na tlaèítko lze zmìnit klávesovou mapu.\n"
-"\n"
-" * Èasové pásmo: instalaèní program se pokusí odhadnout èasové pásmo na\n"
-"základì vybraného jazyka. To ale nemusí souhlasit, mù¾ete ¾ít v jiné zemi\n"
-"a tak je zde umo¾nìno zmìnit èasovou zónu, ve které se nyní nacházíte.\n"
-"\n"
-" * Tiskárna: Kliknutím na tlaèítko \"Bez tiskárny\" se spustí prùvodce\n"
-"konfigurací tiskárny.\n"
-"\n"
-" * Zvuková karta: pokud byla pøi instalaci detekována zvuková karta, je zde\n"
-"zobrazena. Pøi instalaci není mo¾né nic mìnit.\n"
-"\n"
-" * TV karta: pokud byla detekována televizní karta, je zde zobrazena.\n"
-"Pøi instalaci není mo¾né nic mìnit.\n"
-"\n"
-" * ISDN karta: pokud byla detekována ISDN karta, je zde zobrazena.\n"
-"Kliknutím na tlaèítko mù¾ete mìnit parametry pro tuto kartu."
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Vyberte disk, který chcete smazat pro instalaci Mandrake Linux.\n"
-"Pamatujte na to, ¾e v¹echna data budou ztracena a nelze jeji¾ obnovit!"
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Kliknìte na \"OK\", pokud chcete smazat v¹echna data a oddíly na tomto\n"
-"pevném disku. Buïte opatrní, po odkliknutí nelze obnovit ¾ádná døívìj¹í "
-"data\n"
-"ani oddíly a to i pro Windows.\n"
-"\n"
-"Kliknutím na \"Zru¹it\" zru¹íte tuto operaci bez ztráty dat a oddílù na "
-"disku."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr "Nelza nalézt modul pro jádro odpovídající aktuálnímu (chybí soubor %s)"
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Vybrali jste pro instalaci následující server(y): %s\n"
-"\n"
-"\n"
-"Tyto servery budou standardnì aktivovány. Pøesto¾e není známý ¾ádný\n"
-"bezpeènostní problém, mohou se pøesto vyskytnout. Je proto dùle¾ité "
-"aktualizovat\n"
-"v¾dy, kdy¾ je to potøeba.\n"
-"\n"
-"\n"
-"Chcete opravdu nainstalovat tyto servery?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Nelze pou¾ít v¹esmìrové vysílání bez NIS domény"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Vlo¾te naformátovanou disketu do %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Tato disketa není formátována"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Pokud chcete pou¾ít ulo¾ený výbìr balíèkù, spus»te instalaci takto: 'linux "
-"defcfg=floppy'"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Chyba pøi ètení souboru %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Nìkterá èást va¹eho hardware potøebuje 'speciální' ovladaèe, aby mohla "
-"pracovat.\n"
-"Dal¹í informace mù¾ete nalézt na: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Musíte mít koøenový oddíl.\n"
-"K jeho vytvoøení musíte zvolit jeden existující oddíl\n"
-"(nebo vytvoøit nový), zvolit 'Pøípojný bod'\n"
-"a nastavit ho na '/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Musíte mít odkládací oddíl"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nemáte odkládací oddíl\n"
-"\n"
-"Chcete pøesto pokraèovat?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Musíte mít FAT oddíl pøipojený na /boot/efi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Pou¾ít volné místo"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Není dostatek místa pro vytvoøení nového diskového oddílu"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Pou¾ít existující oddíl"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Není zde ¾ádný existující oddíl k pou¾ití"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Pou¾ít Windows oddíl jako loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Který diskový oddíl chcete pou¾ít pro Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Zvolte velikosti"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Velikost koøenového oddílu v MB:"
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Velikost odkládacího oddílu v MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Pou¾ít volné místo na Windows oddílu"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Na kterém oddílu chcete mìnit velikost?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Poèítám hranice souborového systému s Windows"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Zmìnu velikost FAT není mo¾né provést, \n"
-"vyskytla se následující chyba: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Vá¹ diskový oddíl s Windows je pøíli¹ fragmentován, pou¾ijte nejdøíve\n"
-"program 'defrag'"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"VAROVÁNÍ!\n"
-"\n"
-"DrakX nyní musí zmen¹it oddíl s Windows. Buïte opatrní: tato operace je\n"
-"nebezpeèná. Pokud jste tak ji¾ neuèinili, mìli byste nejprve ukonèit "
-"instalaci,\n"
-"spustit scandisk ve Windows (popøípadì i defrag) a potom instalaci znovu "
-"spustit\n"
-"Také byste si mìli data zálohovat. A¾ si budete jistí, ¾e chcete pokraèovat\n"
-"stisknìte Ok."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Jakou velikost oddílu chcete nechat pro Windows na"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "diskovém oddílu %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Zmìna FAT oddílu neuspìla: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nejsou zde ¾ádné FAT oddíly, které by bylo mo¾né zmìnit (nebo není dostatek "
-"místa)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Smazat celý disk"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Odstranit Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Máte více ne¾ jeden pevný disk, na který chcete instalovat Linux?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "V©ECHNY diskové oddíly a data na disku %s budou zru¹ena"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Vlastní rozdìlení disku"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Pou¾ít fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Nyní mù¾ete rozdìlit vá¹ hardisk %s.\n"
-"A¾ skonèíte, nezapomeòte ulo¾it zmìny pomocí 'w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nemáte dostatek volného místa na oddílu s Windows"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Nemù¾u najít ¾ádné volné místo pro instalaci"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Prùvodce DrakX na¹el následující øe¹ení:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Vytváøení diskových oddílù selhalo: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Startuji sí»"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Zastavuji sí»"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Stala se chyba, ale nevím, jak jí správnì interpretovat.\n"
-"Pokraèujte na vlastní riziko."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Zdvojený pøípojný bod %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Nìkteré dùle¾ité balíèky nebyly správnì nainstalované.\n"
-"Je mo¾né, ¾e je po¹kozen CD disk nebo CD-ROM mechanika.\n"
-"Zkontrolujete to pou¾itím pøíkazu \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Vítá vás %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Není dostupná ¾ádná disketová mechanika"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Zaèínám '%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Zadejte velikost pro instalovaný systém"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Celková velikost: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Verze: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Velikost: %d kB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Vyberte si balíèky, které chcete nainstalovat"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Informace"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Instalovat"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Instaluji"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Èekejte prosím "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Zbývající èas "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Celkový èas "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Pøipravuji instalaci"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaluji balíèek %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Pøesto pokraèovat?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Stala se chyba pøi øazení balíèkù:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Pou¾ít existující nastavení pro X11?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Vá¹ systém má málo systémových prostøedkù. Pøi instalaci Mandrake Linuxu se\n"
-"mù¾ete setkat s rùznými problémy. Pokud se tak stane, zkuste textovou\n"
-"verzi instalaèního programu. Ta se spou¹tí tak, ¾e pøi startu\n"
-"z CD mechaniky stisknete 'F1' a poté napí¹ete 'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Typ instalace"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Prosím zvolte jednu z následujících instalaèních tøíd:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Celková velikost zvolených balíèkù je pøibli¾nì %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Pokud si pøejete instalaci na men¹í prostor ne¾ je tento,\n"
-"zvolte si kolik procent balíèkù se má nainstalovat.\n"
-"\n"
-"Malý poèet procent nainstaluje pouze ty nejdùle¾itìj¹í balíèky, 100%%\n"
-"nainstaluje v¹echny zvolené."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Na va¹em hardisku je místo pouze pro %d%% tìchto balíèkù.\n"
-"\n"
-"Pokud jich chcete nainstalovat je¹tì ménì, zvolte jiný poèet\n"
-"procent. Malý poèet procent nainstaluje pouze ty nejdùle¾itìj¹í\n"
-"balíèky, %d%% nainstaluje maximální mo¾né mno¾ství balíèkù."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Pøesnìji si budete moci vybrat v pøí¹tím kroku"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procent balíèkù k instalaci"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Výbìr skupiny balíèkù"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Výbìr jednotlivých balíèkù"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Celková velikost: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "©patný balíèek"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Jméno: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Dùle¾itost: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Nemù¾ete oznaèit tento balíèek, proto¾e pro jeho instalaci není dost místa"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Tyto balíèky budou instalovány"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Tyto balíèky budou odebrány"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Nemù¾ete vybrat/nevybrat tento balíèek"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Toto je nepostradatelný balíèek, nemù¾e být odstranìn"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Nemù¾ete od-oznaèit tento balíèek, proto¾e je u¾ nainstalovaný"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Tento balíèek musí být obnoven\n"
-"Jste si jisti, ¾e ho nechcete zvolit?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Tento balíèek musí být obnoven, nemù¾ete ho nezvolit"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Ukázat automaticky vybrané balíèky"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Ulo¾it/Nahrát na/z disketu/y"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "Aktualizuji výbìr balíèkù"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "Minimální instalace"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Odhaduji"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Èekejte prosím, pøipravuji instalaci"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d balíèkù(y)"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Varování\n"
-"\n"
-"Pøeètìte si prosím pozornì následující termíny. Pokud s nimi nesouhlasíte,\n"
-"nejste oprávnìn pokraèovat v instalaci následujícím CD. Stisknìte\n"
-"\"Odmítnout\" pro pokraèování v instalaci bez tohoto média.\n"
-"\n"
-"\n"
-"Nìkteré programy na dal¹ím CD médiu nejsou ¹íøeny podle licence GPL èi\n"
-"podobné. Ka¾dý z tìchto programù je ¹íøen podle vlastní licence a podmínek.\n"
-"Ètete pozornì tyto licence a podmínky pøed tím, ne¾ zaènete daný software\n"
-"pou¾ívat nebo ¹íøit.\n"
-"Nìkteré licence zakazují pøená¹ení, vytváøení duplikatù (mimo zálo¾ní "
-"kopii),\n"
-"dal¹í ¹íøení, dekompilaci, reverzní engineering nebo modifikaci komponent.\n"
-"Ka¾dé poru¹ení podmínek okam¾itì pøeru¹uje va¹e práva podle dané licence.\n"
-"I kdy¾ dané licence dávají nìjaká práva, není dovoleno instalovat daný\n"
-"program na více systémù, pøizpùsobovat ho provozu na síti. V pøípadì\n"
-"pochybností kontaktujte distributora nebo výrobce daného programu.\n"
-"Pøenechání práv tøetím osobám nebo kopírování èásti komponent èi\n"
-"dokumentace je také zakázáno.\n"
-"\n"
-"\n"
-"V¹echna práva na programy na dal¹ím CD médiu patøí jejím právoplatným\n"
-"vlastníkùm podle autorského zákona.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Potvrdit"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Odmítnout"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Vymìòte prosím CD!\n"
-"\n"
-"Prosím vlo¾te CD oznaèené \"%s\" do mechaniky a stisknìte Ok.\n"
-"\n"
-"Pokud toto CD nemáte, stisknìte Zru¹it a toto CD nebude nainstalováno."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Stala se chyba pøi instalaci balíèkù:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Stala se chyba"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Souhlas s licencí"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Uvod\n"
-"\n"
-"Operacni system a ruzne casti dostupne v distribuci Mandrake Linux jsou "
-"nazyvany \"Softwarove produkty\" (\"Software Products\"). Softwarové "
-"produkty zahrnuji, ale nejsou omezeny, na programy, metody pravidla a "
-"dokumentaci vztahujici se k operacnimu systemu a dalsim komponentam "
-"distribuce Mandrake Linux.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klávesnice"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Jaké je rozlo¾ení va¹í klávesnice?"
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Zde je kompletní seznam dostupných klávesnic"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Který typ instalace chcete?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Instalace/Aktualizace"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Je to instalace nebo aktualizace?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Doporuèená"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Expertní"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Aktualizovat"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Jaký je typ va¹í my¹i?"
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Pøipojení my¹i"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Ke kterému sériovému portu je pøipojena va¹e my¹?"
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Emulace tlaèítek"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Emulace 2 tlaèítka"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Emulace 3 tlaèítka"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Nastavuji PCMCIA karty..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Nastavuji IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "nejsou dostupné ¾ádné diskové oddíly"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Hledám oddíly, které lze pøipojit"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Zvolte si pøípojné(mount) body"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Nemù¾u pøeèíst va¹i tabulku oddílù, je pro mì pøíli¹ poru¹ená :(\n"
-"Mù¾u se pokusit pokraèovat v èi¹tìní ¹patných oddílù (V©ECHNA\n"
-"DATA budou ztracena!). Jiná mo¾nost je zakázat DrakX mìnit tabulku\n"
-"oddílù (chyba je %s)\n"
-"\n"
-"Souhlasíte s tím, ¾e pøíjdete o v¹echny oddíly?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake neuspìl pøi ètení tabulky oddílù.\n"
-"Pokraèujte pouze na vlastní riziko!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Pro bootstrap není potøebné místo o velikosti 1MB! Instalace mù¾e pokraèovat "
-"ale pro spu¹tìní systému musíte vytvoøit bootstrap oddíl pomocí DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "Nebyl nalezen koøenový oddíl pro provedení aktualizace"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Koøenový oddíl"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Který diskový oddíl je koøenový (/) ?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Musíte restartovat poèítaè aby se projevily zmìny v tabulce oddílù"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Zvolte diskové oddíly které chcete naformátovat"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Otestovat na vadné stopy?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Formátuji oddíly"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Vytváøím a formátuji soubor %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Není dostatek odkládacího prostoru k instalaci, prosím pøidejte nìjaký"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Hledám dostupné balíèky"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Vyhledávám balíèky pro aktualizaci"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Na va¹em systému není dostatek místa pro instalaci nebo aktualizaci (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Kompletní (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimální (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Doporuèená (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Vlastní"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Vyberte si, zda chcete ulo¾it nebo nahrát výbìr balíèkù na disketu.\n"
-"Formát výbìru je stejný jako formát automaticky generované diskety."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Nahrát z diskety"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Nahrávám z diskety"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Výbìr balíèkù"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "Vlo¾te disketu obsahující výbìr balíèkù"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Ulo¾it na disketu"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Velikost vybraných balíèkù je vìt¹í ne¾ místo na disku"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Pokud máte v¹echna CD vypsaná ní¾e, klepnìte na Ok.\n"
-"Pokud nemáte ¾ádné z nich, klepnìte na Zru¹it.\n"
-"Pokud Vám chybí pouze nìkteré z nich, odznaète je, a zvolte Ok."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM oznaèené \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instaluji balíèek %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Nastavení po instalaci"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Vlo¾te prosím spou¹tìcí disketu do %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Vlo¾te prosím disketu s moduly do %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Nyní si mù¾ete stáhnout ¹ifrovací software.\n"
-"\n"
-"VAROVÁNÍ:\n"
-"\n"
-"Kvùli rùzným obecným po¾adavkùm a naøízením rùzných soudních úøadù,\n"
-"vztahujícím se na tento druh software, by se mìl zákazník a/nebo koncový\n"
-"u¾ivatel ujistit, zda mu jeho soudní správa umo¾òuje stáhnout si, ulo¾it\n"
-"a pou¾ívat tento software.\n"
-"\n"
-"Zákazník a/nebo koncový u¾ivatel by si mìl být vìdomý toho, ¾e nesmí\n"
-"pøestupovat zákony své jurisdikce. Pokud zákazník a/nebo koncový u¾ivatel\n"
-"nebude respektovat ustanovení vztahujících se zákonù, mù¾e se vystavit\n"
-"postihu.\n"
-"\n"
-"V ka¾dém pøípadì se Mandrakesoft i jeho výrobny a dodavatelé vzdávají\n"
-"jakékoliv zodpovìdnosti za pøímé i nepøímé ¹kody (vèetnì ztráty ziskù,\n"
-"pøeru¹ení podnikání, ztráty obchodních informací, jako¾to i jiných "
-"penì¾ních\n"
-"ztrát a eventuálních postihù, po¾adavkù na od¹kodnìní a ¾alob) vzniklé\n"
-"vlastnictvím, pou¾íváním nebo pouhým stahováním tohoto software, ke kterému\n"
-"mù¾e mít zákazník a/nebo nebo koncový u¾ivatel pøístup kdy¾ odsouhlasí\n"
-"tuto dohodu.\n"
-"\n"
-"\n"
-"Pokud máje jakékoliv dotazy vztahující se k této dohodì, kontaktujte prosím\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Zvolte si zrcadlo(mirror) pro stahování balíèkù"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Stahuji ze zrcadla(mirror) seznam dostupných balíèkù"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Prosím vyberte si balíèky které chcete nainstalovat."
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Jaké je va¹e èasové pásmo?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "Hardwarové hodiny nastaveny na GMT"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatická synchronizace èasu (pomocí NTP)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "NTP Server"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Vzdálený CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Bez tiskárny"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Souhrn"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "My¹"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Èasová zóna"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Tiskárna"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDN karta"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Zvuková karta"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV karta"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Lokální soubory"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Hlavní(root) heslo"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Bez hesla"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Toto heslo je pøíli¹ jednoduché (musí být alespoò %d znakù dlouhé)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Ovìøení"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "Ovìøení pomocí LDAP"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "Základní dn pro LDAP"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "LDAP server"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "Ovìøení pomocí NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS Doména"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS Server"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Pomocí startovací diskety je mo¾né spustit systém Linux bez závislosti na\n"
-"zavadìèi systému. To je u¾iteèné tøeba v pøípadì, ¾e nechcete instalovat "
-"SILO\n"
-"na poèítaè, nebo jiný operaèní systém SILO pøepsal nebo SILO nepracuje "
-"správnì\n"
-"s hardwarovou konfigurací. Vlastní startovací disketa je také u¾iteèná "
-"tehdy,\n"
-"pokud je potøeba provést opravu systému po pøedchozím selhání.\n"
-"\n"
-"Pokud chcete vytvoøit startovací disketu, vlo¾te disketu do mechaniky\n"
-"a stisknìte \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "první mechaniky"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "druhé mechaniky"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Pøeskoèit"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Pomocí startovací diskety mù¾ete spustit Linux bez pou¾ití normálního\n"
-"zavádìcího programu (bootloader). To je u¾iteèné pokud nechcete instalovat\n"
-"LILO (nebo Grub), nebo jiný operaèní systém odstraní LILO, nebo LILO\n"
-"na va¹em poèítaèi nefunguje. Vlastní startovací disketa také mù¾e být\n"
-"pou¾ita spolu s \"Mandrake záchranným diskem\" (rescue image), co¾ "
-"poskytuje\n"
-"úèinnou pomoc pøi havárii systému. Chcete vytvoøit startovací disketu?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Bohu¾el není dostupná ¾ádná disketová mechanika"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Zvolte mechaniku, kde chcete vytvoøit startovací disketu"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Vlo¾te disketu do %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Vytváøím startovací disketu"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Pøipravuji zavádìcí program"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Zdá se, ¾e máte nìjaký neznámý poèítaè,\n"
-"na kterém nebude yaboot pracovat.\n"
-"Instalace bude pokraèovat, ale budete\n"
-"potøebovat BootX pro spu¹tìní systému."
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Chcete pou¾ít aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Stala se chyba pøi instalaci aboot,\n"
-"mám se pokusit o instalaci i kdy¾ to zru¹í první oddíl na disku?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-msgid "Installing bootloader"
-msgstr "Instaluji zavádìcí program"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalace zavádìcího programu neuspìla. Stala se tato chyba:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Mù¾ete potøebovat zmìnit startovací zaøízení pro Open Firmware\n"
-" pro aktivaci spou¹tìcího programu. Pokud nevidíte po spu¹tìní prompt,\n"
-" stisknìte pøi startu Command-Option-O-F a zadajte:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Potom zadejte: shut-down\n"
-"Pøi dal¹ím spu¹tìní u¾ uvidíte prompt."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Nízká"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Støední"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Vysoká"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Zvolte si úroveò zabezpeèení"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Vlo¾te prázdnou disketu do %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Vytváøím disketu pro automatickou instalaci"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Nìkteré kroky nebyly dokonèeny.\n"
-"\n"
-"Chcete opravdu nyní skonèit?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratulujeme vám, instalace je dokonèena.\n"
-"Vyjmìte startovací média a stisknìte return pro restart.\n"
-"\n"
-"Na opravy této instalace systému Mandrake Linux se lze informovat\n"
-"na stránce Errata na http://www.mandrakelinux.com/.\n"
-"\n"
-"Informace o konfiguraci systému po instalaci jsou dostupné\n"
-"v dané kapitole oficiální u¾ivatelské pøíruèky pro Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Vytvoøit disketu pro automatickou instalaci"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Instalace mù¾e být v pøípadì potøeby plnì automatická,\n"
-"ale pou¾ije se celý disk!!!\n"
-"(v pøípadì instalace na druhý poèítaè)\n"
-"\n"
-"Takto lze jednodu¹e zopakovat instalaci.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automaticky"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Zopakovat"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Ulo¾it výbìr jednotlivých balíèkù"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Instalace %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> pøepn. mezi prvky | <Space> výbìr   | <F12> dal¹í obraz."
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "chybí kdesu"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "Vyberte soubor"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Roz¹íøení"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Prosím poèkejte"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Rozbal vìtev"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Sbal vìtev"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Pøepnutí mezi abecedním a skupinovým øazením"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Dvojsmyslnost (%s), buïte pøesnìj¹í\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "©patná volba, zkuste to znovu\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (výchozí %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Va¹e volba? (výchozí %s)"
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Va¹e volba? (výchozí %s; zadejte 'nic' pro nic) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Èeské (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Nìmecké"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvoøák"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "©panìlské"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Finské"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Francouzské"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norské"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Polské"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Ruské"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "©védské"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "UK-Britské"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "US-Americké"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Albánské"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Arménské (staré)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Arménské (psací stroj)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Arménské (foneticky)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Ázerbajd¾ánské (latinka)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belgické"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulharské"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilské (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Bìloruské"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "©výcarské (Nìmecký styl)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "©výcarské (Francouzský styl)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Èeské (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Nìmecké (bez mrtvých kláves)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Dánské"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvoøák (US) "
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvoøák (Norské)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estonské"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzínské (\"Ruské\" rozlo¾ení)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzínské (rozlo¾ení \"Latin\")"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Øecké"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Maïarské"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Chorvatské"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Izraelské"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Izraelské (foneticky)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Íránské"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islandské"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Italské"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japonská 106 kláves"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Korejská klávesnice"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latinsko-Americké"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litevské AZERTY (stará)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litevské AZERTY (nová)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litevské \"èíselná øada\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litevské \"foneticky\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-msgid "Latvian"
-msgstr "Latevské"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Makedonské"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Holandské"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Polské (rozlo¾ení QWERTY)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Polské (rozlo¾ení QWERTZ)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugalské"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Kanadské (Quebec)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Rumunské (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Rumunské (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Ruské (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Slovinské"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovenské (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovenské (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "Srbské (cyrilice)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Thajské"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr "Tad¾iská klávesnice"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turecké (tradièní model \"F\")"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turecké (moderní model \"Q\")"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukrajinské"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "US (mezinárodní)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamská \"èíselná øada\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslávské (latin)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Propletené pøípojné body %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Odeberte nejdøíve logické disky\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - my¹"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standardní"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Standardní PS2 my¹ s koleèkem"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 tlaèítko"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Obecná"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "S koleèkem"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "Sériová"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Standardní dvoutlaèítková my¹"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Standardní tøítlaèítková my¹"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech série CC (sériová)"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (sériová, starý C7 typ)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "Busmouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 tlaèítka"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 tlaèítka"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "®ádná"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Bez my¹i"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Vyzkou¹ejte prosím, zda funguje my¹"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Vyzkou¹ejte na my¹i,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "TOÈIT KOLEÈKEM!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Ukonèit"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Dal¹í ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Pøedchozí"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Je to správnì?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Pøipojení k Internetu"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Nejbì¾nìji se pro pøipojení pomocí adsl pou¾ívá pppoe.\n"
-"Nìkterá pøipojení pou¾ívají pptp, nìkterá pouze dhcp. Jestli si nejste "
-"jistí, zvolte 'pou¾ít pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "pou¾ít dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pou¾ít pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pou¾ít pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Kterého dhcp klienta chcete pou¾ít?\n"
-"Standardní je dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ve va¹em poèítaèi nebyl nalezen ¾ádný sí»ový adaptér.\n"
-"Nemohu nastavit typ spojení."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Zvolte sí»ové rozhraní"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Vyberte si prosím, který sí»ový adaptér chcete pou¾ít pro pøipojení k "
-"internetu"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nebyla nalezena sí»ová karta"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Nastavuji sí»"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Prosím zadejte jméno va¹eho poèítaèe, proto¾e ho vy¾adují nìkteré\n"
-"DHCP servery. Toto jméno musí být úplné, jako napøíklad\n"
-"'mybox.mylab.myco.com'."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Jméno poèítaèe"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Prùvodce nastavením sítì"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Externí ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interní ISDN karta"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Jaké je va¹e ISDN pøipojení?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Kterou ISDN konfiguraci preferujete?\n"
-"\n"
-"* Starou, pou¾itou pro isd4net. Ta obsahuje výkonné nástroje,\n"
-"  ale je choulostivá na konfiguraci a není standardní.\n"
-"\n"
-"* Novou konfiguraci, snaz¹í pro porozumìní, více standardní,\n"
-"  ale s ménì nástroji.\n"
-"\n"
-"Doporuèujeme vybrat si snaz¹í novou konfiguraci.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nová konfigurace (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Stará konfigurace (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "Nastavení ISDN"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Vyberte si svého poskytovatele internetu.\n"
-" Pokud není na seznamu, vyberte si Jiný"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "Evropský protokol"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "Evropský protokol (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "Protokol pou¾itý ve zbytku svìta"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol pou¾itý ve zbytku svìta \n"
-" ¾ádný D-kanál (leased lines)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Který protokol chcete pou¾ít?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Jaký typ karty máte?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Nevím"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Jestli máte ISA kartu, mìly by být hodnoty na následující obrazovce "
-"správné.\n"
-"\n"
-"Jestli máte PCMCIA kartu, musíte znát její IRQ a IO.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Pøeru¹it"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Pokraèovat"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Kterou z tìchto ISDN karet máte?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Na¹el jsem ISDN PCI kartu, její¾ typ ale neznám. Prosím zvolte si jednu z "
-"následujícího seznamu PCI karet."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nena¹el jsem ¾ádnou ISDN PCI kartu. Prosím zvolte si jednu z následující "
-"nabídky"
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Ke kterému sériovému portu je vá¹ modem pøipojen?"
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Mo¾nosti vytáèení"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Jméno pøipojení"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Telefonní èíslo"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Pøihla¹ovací jméno"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Podle scénáøe"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Pomocí terminálu"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Jméno domény"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "První DNS Server (nepovinný)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Druhý DNS Server (nepovinný)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Mù¾ete se odpojit nebo pøekonfigurovat pøipojení."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Mù¾ete pøekonfigurovat pøipojení."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "V souèasnosti jste pøipojeni k Internetu"
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Nemù¾ete se pøipojit k Internetu nebo pøekonfigurovat pøipojení."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "V souèasnosti nejste pøipojeni k Internetu."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Pøipojit se k internetu"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Odpojit se od internetu"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Nastavení sí»ového pøipojení (LAN nebo Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Nastavení a pøipojení k internetu"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Nyní se pøipravuje konfigurace %s pøipojení."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Nyní se bude konfigurovat pøipojení %s.\n"
-"\n"
-"\n"
-"Stisknìte OK pro pokraèování."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Nastavení sítì"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Proto¾e provádíte instalaci po síti, je ji¾ sí» nastavena.\n"
-"Kliknìte na Ok pro zachování nastavení nebo kliknìte na Zru¹it pro nové "
-"nastavení pøipojení Internetu a k síti.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Vítá vás prùvodce pøipojením k síti\n"
-"\n"
-"Nyní lze nastavit pøipojení k síti nebo internetu.\n"
-"Pokud nechcete pou¾ít automatickou detekci, odznaète políèko.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Zvolte profil pro nastavení"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Pou¾ít autodetekci"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Detekuji zaøízení..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Modemové pøipojení"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "detekováno na portu %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN pøipojení"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "detekováno %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ADSL pøipojení"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "detekováno na rozhraní %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Kabelové pøipojení"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "detekováno kabelové pøipojení"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "Pøipojení k LAN"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "detekovaná(é) sí»ová(é) karta(y)"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Zvolte si pøipojení, které chcete nastavit"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Máte nastaveno více zpùsobù, jak se pøipojit k Internetu.\n"
-"Vyberte si jeden, který chcete pou¾ít.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Internetové pøipojení"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Chcete se automaticky pøipojovat po startu poèítaèe?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Nastavení sítì"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr "Je potøebné znovu spustit sí»"
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Vyskytl se problém pøi restartu sítì: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Gratulujeme, konfigurace sítì a internetu je ukonèena.\n"
-"\n"
-"Konfigurace bude nyní aktivována.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Doporuèujeme po tomto kroku restartovat X Window,\n"
-"aby se pøede¹lo problémùm se zmìnou jména poèítaèe."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"VAROVÁNÍ: Toto zaøízení ji¾ bylo nastaveno pro pøipojení k Internetu.\n"
-"Kliknìte na Ok pro zachování nastavení.\n"
-"Modifikace následujících polo¾ek pøepí¹e toto nastavení."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Prosím zadejte IP nastavení pro tento poèítaè.\n"
-"Ka¾dá polo¾ka musí být zadána jako IP adresa v 'desetinné' formì\n"
-"(napøíklad 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Nastavuji sí»ové zaøízení %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (ovladaè %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP adresa"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Maska sítì"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Automatická IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa musí být ve formátu 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Prosím zadejte jméno va¹eho poèítaèe.\n"
-"Toto jméno musí být úplné, jako 'mybox.mylab.myco.com'.\n"
-"Pokud pou¾íváte bránu(gateway), mù¾ete také zadat její adresu"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS server"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Brána(gateway)"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Zaøízení brány(gateway)"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Nastavení proxy"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr "Sledovat id sí»ové karty (u¾iteèné u notebookù)"
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Proxy by mìla být http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Proxy by mìla být ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Nastavení Internetu"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Chcete se nyní pokusit pøipojit k internetu?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Testuji pøipojení k internetu..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Poèítaè je nyní pøipojen k internetu"
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Z bezpeènostních dùvodù bude spojení ukonèeno."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Nepodaøilo se pøipojit k Internetu.\n"
-"Pokuste se pøekonfigurovat dané pøipojení."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Nastavení pøipojení"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Prosím vyplòte nebo zkontrolujte následující údaje"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ karty"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "DMA karty"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "IO karty"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "IO_0 karty"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "IO_1 karty"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Va¹e osobní telefonní èíslo"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Jméno poskytovatele (napø provider.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Telefonní èíslo poskytovatele"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "DNS poskytovatele è.1 (volitelné)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "DNS poskytovatele è.2 (volitelné)"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "Výbìr si zemi"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Typ vytáèení"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Rychlost pøipojení"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "Prodleva pøipojení (vteøiny)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Vá¹ úèet (u¾ivatelské jméno)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Heslo va¹eho úètu"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Roz¹íøené diskové oddíly nejsou na tomto systému podporovány"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Ve tabulce diskových oddílù je mezera, ale nemohu ji pou¾ít.\n"
-"Jediné øe¹ení je pøesunout primární oddíly tak, abyste mìli mezeru vedle\n"
-"roz¹íøených oddílù."
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Obnova ze souboru %s neuspìla: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "©patný zálo¾ní soubor"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Chyba pøi zapisování do souboru %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Nìco ¹patného se stalo s pevným diskem. \n"
-"Test na integritu dat selhal. \n"
-"To znamená, ¾e zápis na tento disk mù¾e skonèit nepøedvídanì"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "musíte mít"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "dùle¾ité"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "nejménì dùle¾ité"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "nedùle¾ité"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "mù¾e se hodit"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Tiskový Systém pro Unix"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Nové generace"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Démon pro tiskárny"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Tisk bez ukládání do fronty"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Místní tiskárna"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Vzdálená tiskárna"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "Tiskárna na vzdáleném CUPS serveru"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "Tiskárna na vzdálený lpd serveru"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Sí»ová tiskárna (socket)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Tiskárna na serveru Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "Tiskárna na Netware serveru"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "Zadejte URI tiskového zaøízení"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "Poslat tiskovou úlohu do pøíkazu"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "Neznámý model"
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr "Pøímý tisk (bey ovladaèe)"
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "(na tomto poèítaèi)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Zvolte pøipojení tiskárny"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Jak je tiskárna pøipojena?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-" V pøípadì vzdáleného CUPS serveru nemusíte nastavovat tiskárny zde,\n"
-"budou automaticky detekovány.\n"
-"V tomto pøípadì zvolte \"Tiskárna na vzdáleném CUPS serveru\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "®ádná"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-msgid "Choose a default printer!"
-msgstr "Zvolte výchozí tiskárnu!"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-"Pøi tisku na vzdálený CUPS server se tiskárny teï nenastavují zde;\n"
-"CUPS server je bude automaticky detekovat. V¹echny známé tiskárny\n"
-"pro tento poèítaèi jsou nyní vypsány v poli \"Výchozí tiskárna\".\n"
-"Vyberte si výchozí tiskárnu a kliknìte na tlaèítko \"Pou¾ít/Naèíst tiskárnu/y"
-"\". Na stejné tlaèítko kliknìte i v pøípadì obnovení seznamu (trvá to tak 30 "
-"s, \n"
-"ne¾ jsou v¹echny tiskárny na vzdáleném CUPS serveru viditelné).\n"
-"Pokud je CUPS na jiné síti, musíte pro získání informací zadat IP adresu\n"
-"a také pøípadnì èíslo portu, jinak nechte toto pole prázdné."
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Ve vìt¹inì pøípadù je CUPS automaticky správnì nastaven v závislosti na\n"
-"sí»ovém prostøedí tak, aby bylo mo¾né tisknout na tiskárnách umístìných\n"
-"na CUPS serverech v síti. Pokud je nastavení nesprávné, vypnìte\n"
-"\"Automatické nastavení pro CUPS\" a editujte soubor /etc/cups/cupsd.conf\n"
-"ruènì. Nezapomeòte potom CUPS restartovat (pøíkazem: \"service cups restart"
-"\")."
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Zavøít"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "Pou¾ít/Naèíst tiskárnu/y"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresa musí být ve formátu 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "Èíslo portu musí být celé èíslo!"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "Výchozí tiskárna"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "IP adresa CUPS serveru"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr "Automatické nastavení pro CUPS"
-
-#: ../../printerdrake.pm_.c:217
-msgid "Detecting devices ..."
-msgstr "Detekuji zaøízení ..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Otestovat porty"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Tiskárna typu \"%s\" byla nalezena na "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Místní Tiskárna"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Ke kterému zaøízení je va¹e tiskárna pøipojena\n"
-"(v¹imli jste si ¾e /dev/lp0 odpovídá LPT1:)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Zaøízení tiskárny"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "Chybí jméno pro zaøízení/soubor!"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-msgid "Reading printer database ..."
-msgstr "Naèítám databázi tiskáren ..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Mo¾nosti vzdálené lpd tiskárny"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Abyste mohli pou¾ívat vzdálenou tiskovou frontu lpd,\n"
-"musíte zadat jméno tiskového serveru a jméno tiskárny,\n"
-"kam má být posílán tisk."
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "Jméno vzdáleného poèítaèe"
-
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "Jméno vzdálené tiskárny"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "Chybí jméno vzdáleného poèítaèe!"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "Chybí jméno vzdálené tiskárny!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Mo¾nosti SMB (Windows 9x/NT) tiskárny"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Abyste mohli tisknout na SMB tiskárnì, musíte zadat\n"
-"jméno SMB poèítaèe(Pozor! To mù¾e být odli¹né od jeho TCP/IP\n"
-"jména) a mo¾ná i IP adresu tiskového serveru, jméno sdílené tiskárny,\n"
-"vhodné u¾ivatelské jméno, heslo a informace o pracovní skupinì."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "Jméno SMB serveru"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "IP adresa SMB serveru"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Sdílené jméno"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Pracovní skupina"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Musí být zadáno buï jméno serveru nebo jeho IP adresa!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "Chybí jméno pro sdílení pøes Sambu!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "Mo¾nosti NetWare tiskárny"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Abyste mohli tisknout na NetWare tiskárnì, musíte zadat jméno NetWare\n"
-"serveru (Pozor! To mù¾e být odli¹né od jeho jména pro TCP/IP!), jméno\n"
-"tiskové fronty tiskárny, kterou chcete pou¾ívat a u¾ivatelské\n"
-"jméno a heslo."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Tiskový server"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Jméno tiskové fronty"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "Chybí jméno pro sdílení pøes NCP!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "Chybí jméno tiskové fronty pro NCP!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Mo¾nosti soketové tiskárny"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Abyste mohli tisknout na soketové tiskárnì, musíte zadat\n"
-"jméno poèítaèe s tiskárnou a volitelnì i èíslo portu.\n"
-"Pokud máte HP JetDirect server, port je obvykle 9100,\n"
-"jinak se mù¾e mìnit. Podívejte do manuálu k va¹emu hardware."
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "Jméno poèítaèe s tiskárnou"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "Chybí jméno poèítaèe s tiskárnou!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "URI Tiskového Zaøízení"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Zde lze pøímo zadat URI pro pøístup k tiskárnì. URI musí splòovat buï "
-"specifikaci CUPS nebo Foomatic. Taky pamatujte na to, ¾e v¹echny URI nejsou "
-"podporovány ve v¹ech tiskových správcích."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "Musí být zadáno správné URI!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Ka¾dá tiskárna potøebuje jméno (napø. lp).\n"
-"Popis a umístìní nemusí být vyplnìny. \n"
-"Jsou to komentáøe pouze pro u¾ivatele."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Jméno tiskárny"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Popis"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Umístìní"
-
-#: ../../printerdrake.pm_.c:701
-msgid "Preparing printer database ..."
-msgstr "Naèítám databázi tiskáren ..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "Výbìr modelu tiskárny"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "Jaký model tiskárny máte?"
-
-#: ../../printerdrake.pm_.c:866
-msgid "OKI winprinter configuration"
-msgstr "Nastavení pro OKI win-tiskárnu"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-"Nyní nastavujete laserovou tiskárnu OKI winprinter. Tyto tiskárny\n"
-"pou¾ívají velmi specifický komunikaèní protokol a mohou pracovat\n"
-"pouze pokud jsou pøipojeny k prvnímu paralelnímu portu. Pokud\n"
-"je tiskárna pøipojena na jiný port, nebo se tiskne pøes server, pøipojte\n"
-"tiskárnu na první paralelní port. Jinak tisk nebude pracovat. Typ\n"
-"pøipojení bude ovladaè ignorovat."
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-msgid "Lexmark inkjet configuration"
-msgstr "Nastavení inkoustové tiskárny Lexmark"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-"Inkoustové tiskárny dodávané firmou Lexmark podporují pouze\n"
-"tisk na lokální tiskárnì, tak¾e nelze tisknout pøes vzdálený server.\n"
-"Prosím pøipojte tiskárnu na lokální port nebo ji nastavte na tom\n"
-"poèítaèi, ke kterému bude pøipojena."
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-"Aby bylo mo¾né tisknout na inkoustových tiskárnách\n"
-"od firmy Lexmark, je potøeba mít tiskový ovladaè.\n"
-"Na stránce (http://www.lexmark.com/) kliknìte na\n"
-"tlaèítko \"Drivers\" a vyberte vá¹ model tiskárny.\n"
-"Potom zvolte Linux jako operaèní systém. Ovladaèe\n"
-"jsou v RPM balíècích nebo mají interaktivní instalaci.\n"
-"To ale nepotøebujete. Ukonèete instalaèní program\n"
-"ihned po odsouhlasení licence. Pak mù¾ete nastavit\n"
-"chování tiskové hlavy pomocí tohoto programu."
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"Výchozí nastavení pro tiskárnu\n"
-"Ujistìte se, ¾e typ stránky a typ inkoustu (pokud je)\n"
-"je nastaven správnì. Pøi tisku ve velmi vysoké kvalitì\n"
-"bude tisk zøejmì pomalej¹í."
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Hodnota %s musí být celé èíslo!"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Hodnota %s musí být èíslo!"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Hodnota %s je mimo rozsah!"
-
-#: ../../printerdrake.pm_.c:1136
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Chcete opravdu nastavit tiskárnu \"%s\"\n"
-"jako výchozí?"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "Testovací stránka"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"Vyberte si testovací stránku, kterou chcete vytisknout.\n"
-"Poznámka: tisk testovací stránky s fotografií mù¾e trvat velmi dlouho\n"
-"nebo se na tiskárnì s málo pamìtí nemusí podaøit vùbec.\n"
-"Ve vìt¹inì pøípadù staèí vytisknout bì¾nou testovací stránku."
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "Bez testovací stránky"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "Tisk"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "Standardní testovací stránka"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr "Alternativní testovací stránka (letter)"
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr "Alternativní testovací stránka (A4)"
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "Testovací stránka s fotografií"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Tisknu testovací stránku(y)"
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Zku¹ební stránka(y) byla(y) poslána(y) na tiskárnu.\n"
-"Mù¾e chvilku trvat ne¾ zaène tisk.\n"
-"Stav tisku:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Zku¹ební stránka byl poslána na tiskárnu.\n"
-"Mù¾e chvilku trvat ne¾ zaène tisk.\n"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "Probìhl tisk správnì ?"
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-msgid "Raw printer"
-msgstr "Pøímý tisk na tiskárnu"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Vytisknout soubor z pøíkazové øádky (terminálového okna) lze buï pøíkazem\n"
-"\"%s<soubor>\" nebo pøes grafické nástroje: \"xpp <soubor> nebo \"qtcups "
-"<soubor>\". Grafické nástroje umo¾òují jednodu¹e vybrat tiskárny a mìnit "
-"jejich parametry.\n"
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Tyto pøíkazy lze nastavit do políèka \"Pøíkazy tisku\" v dialogu tisku ve "
-"vìt¹inì aplikací, ale nezadává se zde jméno souboru, které je poka¾dé jiné v "
-"závislosti na dané aplikaci.\n"
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Pøíkaz \"%s\" dovoluje modifikovat volby pro ka¾dou tiskovou úlohu. "
-"Jednodu¹e zadejte potøebné nastavení do pøíkazové øádky, napø. \"%s<soubor>"
-"\". "
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-"V¹echny mo¾nosti pro souèasnou tiskárnu jsou zobrazeny ní¾e, nebo kliknìte "
-"na tlaèítko \"Mo¾nosti tiskárny\".\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Pro vyti¹tìní souboru z pøíkazové øádky (v terminálovém oknì) pou¾ijte "
-"pøíkaz \"%s<soubor>\".\n"
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Tento pøíkaz lze nastavit do políèka \"Pøíkazy tisku\" v dialogu tisku ve "
-"vìt¹inì aplikací, ale nezadává se zde jméno souboru, které je poka¾dé jiné v "
-"závislosti na dané aplikaci.\n"
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-"V¹echny mo¾nosti pro souèasnou tiskárnu jsou zobrazeny ní¾e, nebo kliknìte "
-"na tlaèítko \"Mo¾nosti tiskárny\".\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Pro vyti¹tìní souboru z pøíkazové øádky (v terminálovém oknì) pou¾ijte "
-"pøíkaz \"%s<soubor>\" nebo \"%s<soubor>\".\n"
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Lze také pou¾ít grafické rozhraní \"xpdq\" pro nastavení mo¾ností a ke "
-"správìtiskových úloh.\n"
-"Pokud pou¾íváte grafické prostøedí KDE, máte na pracovní plo¹e ikonu,\n"
-"pojmenovanou \"STOP Printer!\", který po kliknutí ihned zastaví "
-"v¹echnytiskové úlohy. To je vhodné tøeba pro pøípady uváznutí papíru.\n"
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Pøíkazy \"%s\" a \"%s\" dovolují modifikovat volby pro ka¾dou tiskovou "
-"úlohu. Jednodu¹e zadejte potøebné nastavení do pøíkazové øádky, napø. \"%"
-"s<soubor>\".\n"
-
-#: ../../printerdrake.pm_.c:1292
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Tisknu na tiskárnu \"%s\""
-
-#: ../../printerdrake.pm_.c:1294
-msgid "Print option list"
-msgstr "Mo¾nosti tiskárny"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "Naèítám data k tisku ..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "Pøenést konfiguraci tiskárny"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-"Konfiguraci tiskárny, kterou jste provedli pro frontu %s lze pøenést\n"
-"na frontu %s, tj. na souèasnou frontu. V¹echna nastavená data\n"
-"(jméno tiskárny, popis, umístìní, typ pøipojení a dal¹í výchozí nastavení)\n"
-"budou pøepsána, ale tiskové úlohy nebudou pøeneseny.\n"
-"Ne v¹echny fronty lze pøenést z následujích dùvodù:\n"
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-"CUPS nepodporuje tiskárny na serverech Novell nebo tiskárny,\n"
-"které posílají data na skupinu pøíkazù.\n"
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-"PDQ podporuje pouze místní tiskárny, vzdálené tiskárny LPD\n"
-"a tisk na tiskárny pøes Sokety/TCP.\n"
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ani LPRng nepodporují IPP tiskárny.\n"
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-"Tiskové fronty, které nebyly vytvoøeny tímto programem\n"
-"nebo pøes \"foomatic\" nelze pøenést."
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-"\n"
-"Také tiskárny pou¾ívající PPD soubory od jejich výrobcù\n"
-"nebo tiskárny s nativními ovladaèi pro CUPS nelze pøenést."
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Oznaète tiskárnu, kterou chcete pøenést a stisknìte \"Pøenést\"."
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "Nepøená¹et tiskárny"
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "Pøenést"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Tiskárna se jménem \"%s\" ji¾ na stranì %s existuje.\n"
-"Kliknìte na \"Pøenést\" pro pøepsání.\n"
-"Taky mù¾ete napsat nové jméno nebo ji pøeskoèit."
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Jméno fronty mù¾e obsahovat pouze písmena, èíslice a podtr¾ítko"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Tiskárna se jménem %s ji¾ existuje,\n"
-"chcete opravdu pøepsat její konfiguraci?"
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "Nové jméno tiskárny"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Pøená¹ím %s ..."
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-"Byla pøenesena výchozí tiskárna (\"%s\").\n"
-"Má se nastavit jako výchozí také na vzdáleném\n"
-"tiskovém systému %s?"
-
-#: ../../printerdrake.pm_.c:1423
-msgid "Refreshing printer data ..."
-msgstr "Obèerstvuji tisková data ...."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr "Nastavení vzdálené tiskárny"
-
-#: ../../printerdrake.pm_.c:1432
-msgid "Starting network ..."
-msgstr "Spou¹tím sí» ...."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-msgid "Configure the network now"
-msgstr "Nastavit sí» nyní"
-
-#: ../../printerdrake.pm_.c:1455
-msgid "Network functionality not configured"
-msgstr "Sí» není nastavena"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-"Nyní zaène konfigurace vzdálené tiskárny. To vy¾aduje funkèní\n"
-"sí»ové spojení, ale sí» není zatím nastavena. Pokud budete pokraèovat\n"
-"bez nastavení sítì, nebude mo¾né pou¾ít tiskárnu, kterou po¾adujete.\n"
-"Jak chcete pokraèovat?"
-
-#: ../../printerdrake.pm_.c:1463
-msgid "Go on without configuring the network"
-msgstr "Pokraèovat bez nastavení sítì"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-"Nastavení sítì provedené pøi instalaci nelze nyní aktivovat.\n"
-"Prosím zkontrolujte, zda je sí» dostupná po spu¹tìní systému\n"
-"a nastavení opravte v øídícím centru Mandrake, v sekci\n"
-"\"Sí» a Internet\"/\"Pøipojení\" a následnì nastavte tiskárnu\n"
-"také v øídícím centru v sekci \"Hardware\"/\"Tiskárna\""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-"Sí» nefunguje a nelze ji spustit. Prosím zkontrolujte\n"
-"nastavení hardware. Pak se opìt pokuste provést\n"
-"nastavení vzdálené tiskárny "
-
-#: ../../printerdrake.pm_.c:1516
-msgid "Restarting printing system ..."
-msgstr "Restartuji tiskový systém ..."
-
-#: ../../printerdrake.pm_.c:1548
-msgid "high"
-msgstr "vysoká"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "paranoid"
-msgstr "paranoidní"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instaluji tiskový systém v bezpeènostní úrovni %s"
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-"Pokou¹íte se instalovat tiskový systém %s na poèítaè, \n"
-"be¾ící v bezpeèností úrovni %s.\n"
-"\n"
-"Tiskový systém pracuje jako démon (proces na pozadí),\n"
-"který èeká na tiskové úlohy a zpracovává je. Tento démon\n"
-"je také pøístupný ze sítì pro jiné poèítaèe, tak¾e se mù¾e stát\n"
-"pøedmìtem sí»ového útoku. Proto je vybráno pouze nìkolik\n"
-"slu¾eb, které jsou v této úrovni spu¹tìny automaticky pøi startu.\n"
-"\n"
-"Chcete opravdu nastavit tiskový systém na tomto poèítaèi?"
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Starting the printing system at boot time"
-msgstr "Spustit tiskový systém pøi startu systému"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-"Tiskový systém (%s) nebude automaticky spu¹tìn pøi startu poèítaèe.\n"
-"\n"
-"Je mo¾né, ¾e volba automatického startu byla vypnuta ve vy¹¹í\n"
-"bezpeènostní úrovni, proto¾e tiskový systém je potenciální\n"
-"nebezpeèí pro sí»ový útok.\n"
-"\n"
-"Chcete nastavit zpìt automatický start tiskového systému?"
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "Ovìøují nainstalovaný software..."
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "Odebírám LPRng..."
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "Odebírám LPD..."
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Zvolte tiskový systém pro tiskárnu"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Který tiskový systém chcete pou¾ít pro tisk?"
-
-#: ../../printerdrake.pm_.c:1759
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Nastavuji tiskárnu \"%s\"..."
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Mo¾nosti tiskárny"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr "Pøipravuji PrinterDrake ...."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "Chtìli byste nastavit tiskárnu?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr "Tiskový systém: "
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-"Jsou nastaveny následující tiskárny.\n"
-"Kliknutím na ka¾dou z nich je mo¾né\n"
-"provést modifikace nebo získat informace.\n"
-"\"Pøidat tiskárnu\" pøidá novou tiskárnu."
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Normání re¾im"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Výchozí)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Tiskárna(y) na vzdáleném CUPS serveru"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-msgid "Printer(s) on remote server(s)"
-msgstr "Tiskárna(y) na vzdáleném serveru"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Pøidat tiskárnu"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-msgid "Do you want to configure another printer?"
-msgstr "Chcete nastavit dal¹í tiskárnu?"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "Zmìnit nastavení tiskárny"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Tiskárna %s: %s %s\n"
-"Co chcete zmìnit na této tiskárnì?"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "Provést!"
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "Typ pøipojení pro tiskárnu"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "Jméno tiskárny, popis, umístìní"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "Výrobce tiskárny, model, ovladaè"
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "Výrobce tiskárny, model"
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr "Nastavit tuto tiskárnu jako výchozí"
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "Tisk testovací(ch) stránky(nek)"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr "Nápovìda pro tisk na této tiskárnì"
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "Odebrat tiskárnu"
-
-#: ../../printerdrake.pm_.c:2071
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Odebírám starou tiskárnu \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Tiskárna \"%s\" je nyní nastavena jako výchozí."
-
-#: ../../printerdrake.pm_.c:2103
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Chcete opravdu odebrat tiskárnu \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2105
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Odebírám tiskárnu \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Nastavení proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Vítejte v konfiguraèním nástroji pro proxy.\n"
-"\n"
-"Zde nastavujete http a ftp proxy zadáním\n"
-"pøidìleného pøihla¹ovacího jména a hesla\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Zadejte prosím hodnoty pro http proxy\n"
-"V pøípadì, ¾e nemáte http proxy, ponechejte prázdné"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URL by mìlo být 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Èíslo portu musí být numerické"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Zadejte prosím hodnoty pro ftp proxy\n"
-"V pøípadì, ¾e nemáte ftp proxy, ponechejte prázdné"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL by mìlo být 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Pokud je potøeba, zadejte prosím pøihla¹ovací jméno\n"
-"a heslo. Pokud je nepotøebujete, nechte prázdné"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "heslo"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "heslo znova"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Hesla nejsou shodná. Zkuste to znovu!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nemù¾u pøidat oddíl do _naformátovaného_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Nemù¾u zapsat soubor %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid neuspìl"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid neuspìl (mo¾ná, ¾e chybí raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Není dostatek oddílù pro RAID úrovnì %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Spustit zvukový systém ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron - spou¹tí opakující se akce"
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd je pou¾íván pro sledování stavu baterie a zaznamenávání pøes syslog.\n"
-"Mù¾e také být pou¾it pro vypnutí poèítaèe pøi vybité baterii."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Spou¹tí pøíkazy naplánované pøíkazem na urèitý èas pøíkazem 'at'.\n"
-"Také spou¹tí pøíkazy pøi nízkém vytí¾ení systému."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je standardní Unixový program který spou¹tí u¾ivatelem zadané programy\n"
-"v pøedem definovaných intervalech. vixie cron má navíc mnoho vlastností,\n"
-"vèetnì vy¹¹í bezpeènosti a více mo¾ností nastavení."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM pøidává do textových programù podporu my¹i (napø pro Midnight "
-"Commander).\n"
-"Mù¾e také v konzoli provádìt operace 'vyjmi' a 'vlo¾' a ovládat pop-up menu."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake testuje hardware a umo¾òuje nový/zmìnìný\n"
-"hardware nastavit"
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr "Apache je WWW server. Je pou¾íván k poskytování HTML a CGI souborù."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internetový superserver démon (nazývaný inetd) spou¹tí mnoho ostatních\n"
-"internetových slu¾eb, tak jak jsou zapotøebí. Odpovídá za start napø.\n"
-"telnetu, ftp, rsh a rlogin. Pokud vypnete inetd, vypnete tím i ostatní\n"
-"slu¾by které spou¹tí."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Spustit paketový filtr pro jádra øady 2.2, který chrání poèítaè\n"
-"proti útokùm ze sítì."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Tento balíèek nahraje zvolenou mapu klávesnice definovanou\n"
-"v /etc/sysconfig/keyboard. Tu lze vybrat pomocí nástroje kbdconfig.\n"
-"Pro vìt¹inu poèítaèù byste ji mìli nechat zapnutou."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatická generace hlavièky jádra v adresáøi /boot\n"
-"pro soubory /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatická detekce a konfigurace hardware pøi spu¹tìní."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf provádí rùzné úkoly pøi spu¹tìní systému\n"
-"nutné pro správu systémové konfigurace."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je tiskový démon, bez kterého nebude fungovat lpr (program pro tisk).\n"
-"Je to server, který posílá ti¹tìné dokumenty jednotlivým tiskárnám."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server pou¾ívaný pro sestavení vysoce výkonného\n"
-"a dostupného serveru."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) je DNS server, který pøekládá hostitelská jména (hostnames) na\n"
-"IP adresy."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Pøipojuje a odpojuje v¹echny sí»ové (NFS), SMB (Lan/Windows) a Netware "
-"(NCP)\n"
-"pøípojné body (mount points)."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivuje èi deaktivuje v¹echny sí»ová rozhraní, která mají nastartovat pøi\n"
-"startu systému."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je oblíbený protokol pro sdílení souborù pøes sítì TCP/IP.\n"
-"Tato slu¾ba poskytuje NFS server, jeho¾ nastavení je v /etc/exports."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je oblíbený protokol pro sdílení souborù pøes sítì TCP/IP.\n"
-"Tato slu¾ba poskytuje mo¾nost uzamykání souborù na NFS."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automaticky nastaví podporu numerické klávesnice v konzoli\n"
-"a v XFree pøi startu."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podpora pro OKI 4w a kompatibilní wintiskárny."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Podpora PCMCIA vìt¹inou znamená podporu zaøízení jako sí»ové karty a\n"
-"modemy v laptopech. Nespustí se pokud ji pøímo nenastavíte, ale není "
-"problém\n"
-"jí mít nainstalovanou i na poèítaèích, které ji nepotøebují."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper spravuje RPC spojení, která jsou pou¾ívána protokoly jako NFS\n"
-"a NIS. Portmap server musí být spu¹tìn na poèítaèích, které fungují jako\n"
-"servery pro protokoly, které pou¾ívají mechanismus RPC."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr "Postfix je program pro doruèování po¹ty z jednoho poèítaèe na jiný."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Ukládá a obnovuje 'stav entropie' na poèítaèi, co¾ je pou¾íváno pro\n"
-"kvalitnìj¹í generaci náhodných èísel."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Pøiøazuje pøímá zaøízení blokovým (napøíklad diskové oddíly)\n"
-"pro aplikace jako je Oracle"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Démon routed umo¾òuje automaticky obnovovat smìrovací tabulku (router "
-"table)\n"
-"pro IP adresy. K tomu pou¾ívá protokol RIP. Zatímco RIP je bì¾nì pou¾íván\n"
-"v malých sítích, pro slo¾itìj¹í sítì je zapotøebí slo¾itìj¹í protokoly."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Protokol rstat umo¾òuje u¾ivatelùm sítì sledovat vytí¾ení jednotlivých\n"
-"strojù pøipojených k síti."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Protokol rusers umo¾òuje u¾ivatelùm sítì zjistit kdo je pøihlá¹en na\n"
-"jiném poèítaèi."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Protokol rwho umo¾òuje vzdáleným(remote) u¾ivatelùm získat seznam\n"
-"v¹ech u¾ivatelù pøihlá¹ených na poèítaèi s démonem rwho (je to podobné\n"
-"slu¾bì finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Spustit zvukový systém pøi startu"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog je program pomocí nìho¾ zaznamenává mnoho démonù správy do "
-"systémových\n"
-"log souborù. Je dobré mít spu¹tìný syslog."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Nahrát ovladaèe pro usb zaøízení."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Startuje X Font Server (to je nezbytné pro bìh XFree)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Zvolte si, které slu¾by by mìli být automaticky spu¹tìny pøi startu"
-
-#: ../../services.pm_.c:126
-msgid "Printing"
-msgstr "Tisk"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr "Sdílení souborù"
-
-#: ../../services.pm_.c:132
-msgid "System"
-msgstr "Systém"
-
-#: ../../services.pm_.c:137
-msgid "Remote Administration"
-msgstr "Vzdálená administrace"
-
-#: ../../services.pm_.c:145
-msgid "Database Server"
-msgstr "Databázové servery"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Sku¾by: aktivováno %d z %d registrovaných"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Slu¾by"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "spu¹tìno"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "zastaveno"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Slu¾by a démoni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Nejsou ¾ádné dal¹í\n"
-"informace o sluìbe, sorry."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Pøi spu¹tìní"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Instaluji balíèky..."
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Nemù¾u pøeèíst va¹i tabulku oddílù, mo¾ná je pøíli¹ naru¹ená :(\n"
-"Pokusím se pokraèovat v èi¹tìní ¹patných oddílù"
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "Chyba!"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Nemohu najít potøebný soubor '%s ' s obrazem."
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "Nastavení automatické instalace"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Zde mù¾ete nastavit disketu pro automatickou instalaci. Tato volba je nìkdy "
-"nebezpeèná a mìla by se pou¾ívat s opatrností.\n"
-"\n"
-"Tato disketa dovoluje zopakovat instalaci, která ji¾ na tomto poèítaèi byla "
-"provedena s tím, ¾e v nìkterých krocích lze zadat jiné hodnoty.\n"
-"\n"
-"Pro maximální bezpeènost není rozdìlování diskù ani formátování provádìno "
-"automaticky, i pøesto, pokud to pøi instalaci zvolíte.\n"
-"\n"
-"Chcete pokraèovat?"
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "Nastavení automatických krokù"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Vyberte prosím, který z krokù instalace má být proveden automaticky stejnì "
-"jako instalaèní program nebo bude ruènì zadán"
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Gratuluji!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketa byla s úspìchem vytvoøena.\n"
-"Nyní lze provést znovu instalaci."
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Sdílení Internetového Pøipojení"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Sdílení Internetového pøipojení je zapnuto"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Sdílení internetového pøipojení u¾ bylo nastaveno.\n"
-"Nyní je povoleno.\n"
-"\n"
-"Co chcete dále dìlat?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "vypnout"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "odmítnout"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "pøekonfigurovat"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Zakazuji servery..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Sdílení Internetového pøipojení je nyní vypnuto."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Sdílení Internetového pøipojení je vypnuto"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetové sdílení u¾ bylo nastaveno.\n"
-"Nyní je vypnuto.\n"
-"\n"
-"Co chcete dále dìlat?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "povolit"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Povoluji servery..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Sdílení Internetového pøipojení je nyní zapnuto."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Vá¹ poèítaè bude zkonfigurován pro sdílení pøipojení na Internet.\n"
-"Tato mo¾nost umo¾òuje pøístup dal¹ích poèítaèù na lokální síti do Internetu "
-"pøes tento poèítaè.\n"
-"\n"
-"Pozn.: potøebujete vyhrazený sí»ový adaptér pro nastavení lokální sítì (LAN)."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Rozhraní %s (pou¾ívá modul %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Rozhraní %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Ve va¹em systému není ¾ádný sí»ový adaptér!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ve va¹em poèítaèi nebyl nalezen ¾ádný sí»ový adaptér. Spus»te prosím program "
-"pro nastavení hardware."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Sí»ové rozhraní"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Na va¹em systému je nastaveno pouze jedno sí»ové rozhraní:\n"
-"\n"
-"%s\n"
-"\n"
-"Na tomto adaptéru bude nastavena lokální sí»."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Prosím zvolte si, ke kterému sí»ovému adaptéru bude pøipojena LAN."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr "Pozor, sí»ový adaptér je u¾ nastaven. Provedu nové nastavení."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Na¹el jsem mo¾ný konflikt v souèasném nastavení %s\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Na¹el jsem existující nastavení firewallu!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Varování! Bylo nalezeno existující nastavení firewallu. Po instalaci mù¾e "
-"být zapotøebí nìjaká ruèní úprava."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Nastavuji..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Nastavuji skripty, instaluji software, startuji servery..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problém s instalací balíèku %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"V¹e se podaøilo nastavit.\n"
-"Nyní lze pou¾ít tento poèítaè pro sdílení pøipojení k Internetu pro va¹i "
-"lokální sí», která pou¾ívá automatickou konfiguraci sítì (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Nastavení ji¾ bylo provedeno, ale nyní je vypnuto."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Nastavení ji¾ bylo provedeno, nyní je povoleno."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Není nastaveno ¾ádné sdílení Internetového pøipojení."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Nastavení sdílení pøipojení k Internetu"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Vítá vás prùvodce nastavením sdílení pøipojení k Internetu!\n"
-"\n"
-"%s\n"
-"\n"
-"Kliknìte na Konfigurovat, pokud chcete spustit prùvodce nastavením."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Nastavení sítì (%d adaptéry(ù))"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Smazat profil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Smazat profil:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Nový profil..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Zadejte jméno vytváøeného profilu (nový profil je vytvoøen jako kopie "
-"vybraného) :"
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Jméno poèítaèe: "
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Pøístup na Internet"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Typ:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Brána(gateway):"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Rozhraní:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Pøipojen"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Nepøipojen"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Pøipojit..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Odpojit..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Pøipojuji se k internetu..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Ukonèuji pøipojení..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Pøipojení není ukonèeno.\n"
-"Zkuste to provést ruènì spu¹tìním\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"jako root."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Poèítaè je nyní odpojen."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Nastavuji pøístup na Internet..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "Nastavení LAN"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Ovladaè"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Rozhraní"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Nastavuji lokální sí»..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr "Kliknìte pro spu¹tìní prùvodce ->"
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Pou¾ít"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Èekejte prosím... Aktivuji konfiguraci"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nemáte nakonfigurováno ¾ádné rozhraní.\n"
-"Nastavte jej kliknutím na 'Konfigurovat'"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "Nastavení LAN"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptér %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Protokol o spu¹tìní"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Spustit pøi startu"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "aktivovat nyní"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "deaktivovat nyní"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nemáte ¾ádné pøipojení k Internetu.\n"
-"Vytvoøte si jej kliknutím na 'Konfigurovat'"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Konfigurace pøipojení k internetu"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Konfigurace pøipojení k internetu"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Typ pøipojení:"
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parametry"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Ethernetová karta"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Dveøe dokoøán"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Slabá"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoidní"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Tato úroveò musí být pou¾ita s rozmyslem. Sice mù¾ete snadnìji pou¾ívat "
-"svùj\n"
-"systém, ale na druhou stranu je velmi citlivý: Nesmí být pou¾it pro\n"
-"poèítaè pøipojený k Internetu. Pro pøihlá¹ení není zapotøebí ¾ádné heslo."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Hesla jsou nyní aktivní, ale stále nedoporuèuji pou¾ít tento poèítaè na síti."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"V této úrovni zabezpeèení je pár vylep¹ení, hlavnì více bezpeènostních\n"
-"varování a testù."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Toto je standardní úroveò zabezpeèení pro poèítaè, který je pou¾íván jako\n"
-"klient pro pøipojení k internetu. Jsou tu bezpeènostní testy."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"S touto bezpeènostní úrovní je mo¾né pou¾ívat poèítaè jako server.\n"
-"Bezpeènost je nyní dostateèná pro server s pøipojením mnoha klientù."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Tato úroveò má vlastnosti úrovnì 4, ale systém je úplnì uzavøen.\n"
-"Toto je maximální bezpeènostní úroveò."
-
-#: ../../standalone/draksec_.c:65
-msgid "Security level"
-msgstr "Úroveò zabezpeèení"
-
-#: ../../standalone/draksec_.c:67
-msgid "Use libsafe for servers"
-msgstr "Pou¾ít libsafe pro servery"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Knihovna, které zabraòuje útokùm proti pøeteèení bufferu nebo proti\n"
-"¹patnému formátování øetìzcù."
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Úroveò zabezpeèení"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Øídící centrum"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Zvolte si nástroj, který chcete pou¾ít"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "pou¾ití: keyboarddrake [--expert] [klávesnice]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Chcete, aby se klávesa BackSpace chovala v konzoli jako Delete?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Vymìnit CD-ROM"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Vlo¾te prosím Instalaèní CD-ROM do mechaniky a stisknìte Ok.\n"
-"Pokud CD nemáte, stisknìte Zru¹it pro pøeru¹ení aktualizace systému."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Nelze spustit aktualizaci na bì¾ící systém !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "nebylo nalezeno serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Emulovat tøetí tlaèítko?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Konfigurace firewallu"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Konfigurace firewallu"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Firewall je ji¾ nastaven.\n"
-"Kliknìte na Konfigurovat pro zmìnu nebo odebrání firewallu"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Kliknìte na Konfigurovat pro standardní firewall"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Výbìr jazyka"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Volba typu instalace"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detekce hardiskù"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Nastavení my¹i"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Výbìr klávesnice"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Bezpeènost"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Souborové systémy"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formátování oddílù"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Výbìr balíèkù pro instalaci"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalace systému"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Pøidání u¾ivatele"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Nastavení sítí"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Nastavení slu¾eb"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Startovací disketa"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Zavádìcí program"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Nastavení X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Ukonèit instalaci"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Konfigurace tinyfirewallu\n"
-"\n"
-"Zde je mo¾né nastavit jednoduchý firewall pro Mandrake Linux.\n"
-"Pro výkonné øe¹ení firewallu pou¾ijte specializovanou\n"
-"distribuci MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Nyní budete dotázáni v nìkolika otázkách na slu¾by, které chcete mít\n"
-"pøístupné z Internetu. Zamyslete se prosím dobøe nad tìmito\n"
-"otázkami, proto¾e bezpeènost poèítaèe je dùle¾itá.\n"
-"\n"
-"Pokud nepou¾íváte dále vyjmenované slu¾by, zaka¾te je prosím.\n"
-"Tyto volby lze kdykoliv zmìnit spu¹tìním této aplikace!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Potøebujete na tomto poèítaèi web server, který je pøístupný\n"
-"z Internetu? Pokud potøebujete webový server pøístupný pouze\n"
-"z tohoto stroje, odpovìzte na tuto otázku Ne.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Pou¾íváte na tomto serveru jmenný server? Pokud ne a nepotøebujete\n"
-"pøedávat jiným poèítaèùm informace o IP adresách, odpovìzte Ne.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Chcete povolit pøíchozí ssh (Secure Shell) spojení? Ssh je náhrada\n"
-"za telnet, která umo¾òuje vzdálené pøihlá¹ení. Pokud nyní\n"
-"pou¾íváte telnet, je velmi vhodné pøejít na ssh. Telnet není\n"
-"kryptovaný -- kdokoliv mù¾e zjistit heslo, pokud ho pøi telnetu\n"
-"pou¾ijete. Na rozdíl od telnetu je ssh kryptované, tak¾e není\n"
-"mo¾né, aby kdokoliv zjistil heslo."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Chcete povolit pøíchozí spojení pøes telnet?\n"
-"Je to VELMI nebezpeèné, tak jak u¾ bylo vysvìtleno na pøedchozí\n"
-"obrazovce. Dùraznì doporuèujeme odpovìdìt Ne a pou¾ít namísto\n"
-"telnetu ssh.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Chcete pou¾ít FTP server, který bude pøístupný z Internetu? Pokud ano,\n"
-"je doporuèeno jej pou¾ívat pouze pro anonymní pøístup. Proto¾e FTP\n"
-"pro pøístup nepou¾ívá ¾ádné kryptování, je mo¾né, ¾e zaslané heslo mù¾e\n"
-"získat kdokoliv, i potenciální útoèník.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Pou¾íváte mailový server? Pokud posíláte po¹tu pøes klienta pine,\n"
-"mutt nebo jiného textového klienta, tak zøejmì ano. V jiných\n"
-"pøípadech to zaka¾te na firewallu.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Pou¾íváte na tomto serveru POP nebo IMAP? Ty se pou¾ívají\n"
-"pro pøístup lidí k emailovým úètùm (ne pøes web).\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Pou¾íváte jádro verze 2.2. Pokud je sí»ová IP adresa automaticky\n"
-"pøidìlena poèítaèi doma nebo v práci (dynamické pøidìlení),\n"
-"potøebujeme tuto mo¾nost povolit. Je to tento pøípad?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Bude vá¹ poèítaè synchronizován s jiným poèítaèem?\n"
-"Vìt¹inou se to pou¾ívá v organizacích s vìt¹ím poètem Unix/Linux\n"
-"poèítaèù pro synchronizaci logování a podobnì. Pokud nejste\n"
-"souèástí vìt¹ího celku nebo jste o nièem podobném nesly¹eli,\n"
-"synchronizaci nepotøebujete."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurace je hotova. Je mo¾né zapsat tyto zmìny na disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Nelze otevøít %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Chyba pøi otevírání %s pro zápis: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Sí»ový poèítaè (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, SSH server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kanceláø"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Pracovní stanice s Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Nástroje pro vá¹ Palm Pilot nebo Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Pracovní stanice"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Doménová jména a sí»ový informaèní server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programy pro kanceláø: textové procesory (kword, abiword), tabulkové "
-"procesory (kspread, gnumeric), prohlí¾eèe pdf a dal¹í"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Nástroje pro zvuk: pøehrávaèe mp3 a midi, mixéry a dal¹í"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knihy a Howto o Linuxu a Free Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Pracovní stanice s KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm a dal¹í"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimédia - video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Skupina programù pro mail, newsy, web, pøenos souborù a chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Databáze"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Databázové servery PostreSQL nebo MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Nástroje pro snadnou konfiguraci poèítaèe"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimédia - zvuk"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utility"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentace"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konzolové nástroje"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Po¹tovní server postfix, server pro news Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internetová stanice"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimédiální stanice"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Nastavení"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Dal¹í grafické desktopy Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, základní grafické prostøedí s kolekcí doprovodných "
-"nástrojù"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafické prostøedí"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Vývoj"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache a Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Nástroje pro vytváøení a vypalování CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kanceláøská stanice"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm a dal¹í"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafické programy jako napø. Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Knihovny pro vývoj v C a C++, programy a hlavièkové soubory"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Sí»ový server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Po¹ta/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Hry"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Pøehrávaèe a editory videa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimédia - grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Zábavné programy: deskové hry, strategie, atd."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Kolekce nástrojù pro ètení a posílaní mailù (pine, mutt, tin..) a pro "
-"prohlí¾ení Webu"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivace, emulátory, minitoring"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Správa osobních financí"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafické prostøedí s u¾ivatelsky pøívìtivým seskupením aplikací a pracovní "
-"plochou"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienti pro rùzné verze protokolu ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internetová brána"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programy pro pøehrávání/editaci zvuku a videa"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Dal¹í grafické desktopy"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editory, shelly, souborové nástroje, terminály"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programy na správu financí jako napø. gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Hry"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Správce osobních informací (PIM)"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimédia - vypalování CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Vìdecká stanice"
diff --git a/perl-install/share/po/cy.po b/perl-install/share/po/cy.po
deleted file mode 100644
index 49c8084b7..000000000
--- a/perl-install/share/po/cy.po
+++ /dev/null
@@ -1,7065 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft 
-# Dafydd Tomos <dafydd@imaginet.co.uk>, 1999
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-06-02 17:16+0200\n"
-"PO-Revision-Date: 1999-11-17 17:21+0100\n"
-"Last-Translator: Dafydd Tomos <dafydd@imaginet.co.uk>\n"
-"Language-Team: Welsh\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-14\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Configure all heads independantly"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:233
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:236
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:239
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../Xconfigurator.pm_.c:240
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Graphic card"
-msgstr "Cerdyn graffeg"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Select a graphic card"
-msgstr "Dewiswch gerdyn graffeg"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "Choose a X server"
-msgstr "Dewiswch weinydd X"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "X server"
-msgstr "Gweinydd X"
-
-#: ../../Xconfigurator.pm_.c:309 ../../Xconfigurator.pm_.c:316
-#: ../../Xconfigurator.pm_.c:366
-#, fuzzy, c-format
-msgid "XFree %s"
-msgstr "Gweinydd XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:312
-#, fuzzy
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Pa fath o rhaniad ydych chi eisiau?"
-
-#: ../../Xconfigurator.pm_.c:324
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:326 ../../Xconfigurator.pm_.c:359
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:328 ../../Xconfigurator.pm_.c:361
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:336 ../../Xconfigurator.pm_.c:350
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:338 ../../Xconfigurator.pm_.c:352
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:371
-#, fuzzy
-msgid "XFree configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../Xconfigurator.pm_.c:416
-msgid "Select the memory size of your graphic card"
-msgstr "Dewiswch faint y cof yn eich cerdyn graffeg"
-
-#: ../../Xconfigurator.pm_.c:463
-msgid "Choose options for server"
-msgstr "Dewiswch opsiynau ar gyfer y gweinydd"
-
-#: ../../Xconfigurator.pm_.c:480
-msgid "Choose a monitor"
-msgstr "Dewiswch fonitor"
-
-#: ../../Xconfigurator.pm_.c:480
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:483
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:490
-msgid "Horizontal refresh rate"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:491
-msgid "Vertical refresh rate"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:528
-msgid "Monitor not configured"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:531
-msgid "Graphic card not configured yet"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:534
-msgid "Resolutions not chosen yet"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:551
-msgid "Do you want to test the configuration?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:555
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:558
-msgid "Test of the configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:597
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:597
-msgid "An error has occurred:"
-msgstr "Fe gafwyd gwall:"
-
-#: ../../Xconfigurator.pm_.c:619
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Gadael mewn %d eiliad"
-
-#: ../../Xconfigurator.pm_.c:630
-#, fuzzy
-msgid "Is this the correct setting?"
-msgstr "Ydi hyn yn gywir?"
-
-#: ../../Xconfigurator.pm_.c:638
-msgid "An error has occurred, try to change some parameters"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:684 ../../printerdrake.pm_.c:277
-#: ../../services.pm_.c:125
-msgid "Resolution"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:731
-msgid "Choose the resolution and the color depth"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:733
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Cerdyn graffeg: %s"
-
-#: ../../Xconfigurator.pm_.c:734
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Gweinydd XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:750 ../../standalone/draknet_.c:280
-#: ../../standalone/draknet_.c:283
-#, fuzzy
-msgid "Expert Mode"
-msgstr "Ext2"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "Show all"
-msgstr "Dangos i gyd"
-
-#: ../../Xconfigurator.pm_.c:794
-msgid "Resolutions"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1330
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Ffurf yr allweddell: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1331
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Math y llygoden: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1332
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dyfais y lygoden: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1333
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1334
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1335
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1336
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Cerdyn graffeg: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1337
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Cof graffeg: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1339
-#, c-format
-msgid "Color depth: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1340
-#, c-format
-msgid "Resolution: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1342
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Gweinydd XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1343
-#, fuzzy, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Gweinydd XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1362
-msgid "Preparing X-Window configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../Xconfigurator.pm_.c:1382
-msgid "What do you want to do?"
-msgstr "Beth ydych eisiau wneud?"
-
-#: ../../Xconfigurator.pm_.c:1387
-msgid "Change Monitor"
-msgstr "Newid Monitor"
-
-#: ../../Xconfigurator.pm_.c:1388
-msgid "Change Graphic card"
-msgstr "Newid cerdyn graffeg"
-
-#: ../../Xconfigurator.pm_.c:1390
-msgid "Change Server options"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1391
-msgid "Change Resolution"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1392
-msgid "Show information"
-msgstr "Dangos gwybodaeth"
-
-#: ../../Xconfigurator.pm_.c:1393
-msgid "Test again"
-msgstr "Profi eto"
-
-#: ../../Xconfigurator.pm_.c:1394 ../../bootlook.pm_.c:238
-msgid "Quit"
-msgstr "Gorffen"
-
-#: ../../Xconfigurator.pm_.c:1402
-#, fuzzy, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../Xconfigurator.pm_.c:1423
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1443
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1446
-msgid "X at startup"
-msgstr "X wrth ddechrau"
-
-#: ../../Xconfigurator.pm_.c:1447
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Fe alla'i osod eich cyfrifiadur i ddechrau X yn otomatig ar ôl bwtio\n"
-"Hoffech chi X i ddechrau wedi i chi ail-fwtio?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 lliw (8 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil o liwiau (15 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil o liwiau (16 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miliwn o liwiau (24 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 biliwn o liwiau (32 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB or more"
-msgstr "16 MB neu fwy"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA safonol, 640x480 ar 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Uwch VGA, 800x600 ar 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 cydweithiol, 1024x768 ar 87 Hz masgledig (dim 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "SVGA, 1024x768 ar 87Hz masgledig, 800x600 ar 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "SVGA estynedig, 800x600 ar 60 Hz, 640x480 ar 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA Di-fasgledig, 1024x768 ar 60 Hz, 800x600 ar 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA amledd uchel, 1024x768 ar 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Amledd newidiol sydd yn gallu dangos 1280x1024 ar 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Amledd newidiol sydd yn gallu dangos 1280x1024 ar 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Amledd newidiol sydd yn gallu dangos 1280x1024 ar 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor sydd yn gallu dangos 1600x1200 ar 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor sydd yn gallu dangos 1600x1200 ar 76 Hz"
-
-#: ../../any.pm_.c:99 ../../any.pm_.c:124
-msgid "First sector of boot partition"
-msgstr ""
-
-#: ../../any.pm_.c:99 ../../any.pm_.c:124 ../../any.pm_.c:197
-msgid "First sector of drive (MBR)"
-msgstr ""
-
-#: ../../any.pm_.c:103
-msgid "SILO Installation"
-msgstr ""
-
-#: ../../any.pm_.c:104 ../../any.pm_.c:117
-msgid "Where do you want to install the bootloader?"
-msgstr ""
-
-#: ../../any.pm_.c:116
-msgid "LILO/grub Installation"
-msgstr ""
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:142
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:130
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:131 ../../any.pm_.c:142
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:134
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:138
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:140 ../../any.pm_.c:142
-msgid "Yaboot"
-msgstr ""
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:180
-msgid "Bootloader main options"
-msgstr ""
-
-#: ../../any.pm_.c:149 ../../any.pm_.c:181
-msgid "Bootloader to use"
-msgstr ""
-
-#: ../../any.pm_.c:151
-msgid "Bootloader installation"
-msgstr ""
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:183
-msgid "Boot device"
-msgstr ""
-
-#: ../../any.pm_.c:154
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr ""
-
-#: ../../any.pm_.c:155
-msgid "Compact"
-msgstr ""
-
-#: ../../any.pm_.c:155
-msgid "compact"
-msgstr ""
-
-#: ../../any.pm_.c:156 ../../any.pm_.c:256
-msgid "Video mode"
-msgstr ""
-
-#: ../../any.pm_.c:158
-msgid "Delay before booting default image"
-msgstr ""
-
-#: ../../any.pm_.c:160 ../../any.pm_.c:741
-#: ../../install_steps_interactive.pm_.c:904 ../../netconnect.pm_.c:629
-#: ../../printerdrake.pm_.c:98 ../../printerdrake.pm_.c:132
-#: ../../standalone/draknet_.c:569
-msgid "Password"
-msgstr ""
-
-#: ../../any.pm_.c:161 ../../any.pm_.c:742
-#: ../../install_steps_interactive.pm_.c:905
-msgid "Password (again)"
-msgstr ""
-
-#: ../../any.pm_.c:162
-msgid "Restrict command line options"
-msgstr ""
-
-#: ../../any.pm_.c:162
-msgid "restrict"
-msgstr ""
-
-#: ../../any.pm_.c:164
-msgid "Clean /tmp at each boot"
-msgstr ""
-
-#: ../../any.pm_.c:165
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr ""
-
-#: ../../any.pm_.c:167
-msgid "Enable multi profiles"
-msgstr ""
-
-#: ../../any.pm_.c:171
-msgid "Give the ram size in MB"
-msgstr ""
-
-#: ../../any.pm_.c:173
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:718
-#: ../../install_steps_interactive.pm_.c:899
-msgid "Please try again"
-msgstr ""
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:718
-#: ../../install_steps_interactive.pm_.c:899
-msgid "The passwords do not match"
-msgstr ""
-
-#: ../../any.pm_.c:182
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:184
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:185
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:186
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:187
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:188
-msgid "Default OS?"
-msgstr ""
-
-#: ../../any.pm_.c:210
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-
-#: ../../any.pm_.c:220 ../../printerdrake.pm_.c:356
-msgid "Add"
-msgstr ""
-
-#: ../../any.pm_.c:220 ../../any.pm_.c:729 ../../diskdrake.pm_.c:46
-#: ../../printerdrake.pm_.c:356
-msgid "Done"
-msgstr "Wedi ei wneud"
-
-#: ../../any.pm_.c:220
-msgid "Modify"
-msgstr ""
-
-#: ../../any.pm_.c:228
-msgid "Which type of entry do you want to add?"
-msgstr ""
-
-#: ../../any.pm_.c:229
-msgid "Linux"
-msgstr ""
-
-#: ../../any.pm_.c:229
-msgid "Other OS (SunOS...)"
-msgstr ""
-
-#: ../../any.pm_.c:230
-msgid "Other OS (MacOS...)"
-msgstr ""
-
-#: ../../any.pm_.c:230
-msgid "Other OS (windows...)"
-msgstr ""
-
-#: ../../any.pm_.c:250 ../../any.pm_.c:252
-msgid "Image"
-msgstr ""
-
-#: ../../any.pm_.c:253 ../../any.pm_.c:264
-msgid "Root"
-msgstr ""
-
-#: ../../any.pm_.c:254 ../../any.pm_.c:283
-msgid "Append"
-msgstr ""
-
-#: ../../any.pm_.c:258
-msgid "Initrd"
-msgstr ""
-
-#: ../../any.pm_.c:259
-msgid "Read-write"
-msgstr ""
-
-#: ../../any.pm_.c:266
-msgid "Table"
-msgstr ""
-
-#: ../../any.pm_.c:267
-msgid "Unsafe"
-msgstr ""
-
-#: ../../any.pm_.c:274 ../../any.pm_.c:279 ../../any.pm_.c:282
-msgid "Label"
-msgstr ""
-
-#: ../../any.pm_.c:276 ../../any.pm_.c:287
-msgid "Default"
-msgstr ""
-
-#: ../../any.pm_.c:284
-msgid "Initrd-size"
-msgstr ""
-
-#: ../../any.pm_.c:286
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:294
-msgid "Remove entry"
-msgstr ""
-
-#: ../../any.pm_.c:297
-msgid "Empty label not allowed"
-msgstr ""
-
-#: ../../any.pm_.c:298
-msgid "This label is already used"
-msgstr ""
-
-#: ../../any.pm_.c:317
-#, fuzzy
-msgid "What type of partitioning?"
-msgstr "Yn fformatio rhaniad %s"
-
-#: ../../any.pm_.c:608
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr ""
-
-#: ../../any.pm_.c:609
-msgid "Do you have another one?"
-msgstr ""
-
-#: ../../any.pm_.c:610
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr ""
-
-#: ../../any.pm_.c:612 ../../interactive.pm_.c:104 ../../my_gtk.pm_.c:616
-#: ../../printerdrake.pm_.c:237
-msgid "No"
-msgstr "Na"
-
-#: ../../any.pm_.c:612 ../../interactive.pm_.c:104 ../../my_gtk.pm_.c:616
-msgid "Yes"
-msgstr "Ie"
-
-#: ../../any.pm_.c:613
-msgid "See hardware info"
-msgstr ""
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:648
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr ""
-
-#: ../../any.pm_.c:649
-#, c-format
-msgid "(module %s)"
-msgstr ""
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:660
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr ""
-
-#: ../../any.pm_.c:668
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-
-#: ../../any.pm_.c:673
-msgid "Autoprobe"
-msgstr ""
-
-#: ../../any.pm_.c:673
-msgid "Specify options"
-msgstr ""
-
-#: ../../any.pm_.c:677
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr ""
-
-#: ../../any.pm_.c:683
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-
-#: ../../any.pm_.c:686
-msgid "Module options:"
-msgstr ""
-
-#: ../../any.pm_.c:697
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid "(already added %s)"
-msgstr ""
-
-#: ../../any.pm_.c:719
-msgid "This password is too simple"
-msgstr ""
-
-#: ../../any.pm_.c:720
-msgid "Please give a user name"
-msgstr ""
-
-#: ../../any.pm_.c:721
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-
-#: ../../any.pm_.c:722
-msgid "This user name is already added"
-msgstr ""
-
-#: ../../any.pm_.c:726
-msgid "Add user"
-msgstr ""
-
-#: ../../any.pm_.c:727
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-
-#: ../../any.pm_.c:728
-msgid "Accept user"
-msgstr ""
-
-#: ../../any.pm_.c:739
-msgid "Real name"
-msgstr ""
-
-#: ../../any.pm_.c:740 ../../printerdrake.pm_.c:97
-#: ../../printerdrake.pm_.c:131
-msgid "User name"
-msgstr ""
-
-#: ../../any.pm_.c:743
-msgid "Shell"
-msgstr ""
-
-#: ../../any.pm_.c:745
-msgid "Icon"
-msgstr ""
-
-#: ../../any.pm_.c:766
-msgid "Autologin"
-msgstr ""
-
-#: ../../any.pm_.c:767
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"If you don't want to use this feature, click on the cancel button."
-msgstr ""
-"Fe alla'i osod eich cyfrifiadur i ddechrau X yn otomatig ar ôl bwtio\n"
-"Hoffech chi X i ddechrau wedi i chi ail-fwtio?"
-
-#: ../../any.pm_.c:769
-#, fuzzy
-msgid "Choose the default user:"
-msgstr "Dewiswch y maint newydd"
-
-#: ../../any.pm_.c:770
-#, fuzzy
-msgid "Choose the window manager to run:"
-msgstr "Dewiswch weithred"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:262 ../../bootloader.pm_.c:608
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:809
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:812
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:815
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:818
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:821
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-
-#: ../../bootloader.pm_.c:825
-msgid "not enough room in /boot"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:918
-msgid "Desktop"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:920
-msgid "Start Menu"
-msgstr ""
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr ""
-
-#: ../../bootlook.pm_.c:81
-msgid "/File/_New"
-msgstr ""
-
-#: ../../bootlook.pm_.c:82
-msgid "<control>N"
-msgstr ""
-
-#: ../../bootlook.pm_.c:84
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../bootlook.pm_.c:85
-msgid "<control>O"
-msgstr ""
-
-#: ../../bootlook.pm_.c:87
-msgid "/File/_Save"
-msgstr ""
-
-#: ../../bootlook.pm_.c:88
-msgid "<control>S"
-msgstr ""
-
-#: ../../bootlook.pm_.c:90
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "/File/-"
-msgstr ""
-
-#: ../../bootlook.pm_.c:93
-msgid "/File/_Quit"
-msgstr ""
-
-#: ../../bootlook.pm_.c:94
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:96
-msgid "/_Options"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-msgid "/Options/Test"
-msgstr ""
-
-#: ../../bootlook.pm_.c:99
-#, fuzzy
-msgid "/_Help"
-msgstr "Cymorth"
-
-#: ../../bootlook.pm_.c:101
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../bootlook.pm_.c:111 ../../standalone/drakgw_.c:634
-#: ../../standalone/draknet_.c:262 ../../standalone/tinyfirewall_.c:57
-#, fuzzy
-msgid "Configure"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../bootlook.pm_.c:114
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../bootlook.pm_.c:121
-msgid "Lilo/grub mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:131
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:134
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Monitor"
-
-#: ../../bootlook.pm_.c:137
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Newid Monitor"
-
-#: ../../bootlook.pm_.c:140
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:144
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:169
-#, fuzzy
-msgid "Boot mode"
-msgstr "Ext2"
-
-#: ../../bootlook.pm_.c:179
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:187
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:193
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:210
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:228
-msgid "Default Runlevel"
-msgstr ""
-
-#: ../../bootlook.pm_.c:236 ../../standalone/draknet_.c:88
-#: ../../standalone/draknet_.c:120 ../../standalone/draknet_.c:184
-#: ../../standalone/draknet_.c:302 ../../standalone/draknet_.c:396
-#: ../../standalone/draknet_.c:473 ../../standalone/draknet_.c:509
-#: ../../standalone/draknet_.c:617
-msgid "OK"
-msgstr ""
-
-#: ../../bootlook.pm_.c:238 ../../install_steps_gtk.pm_.c:576
-#: ../../interactive.pm_.c:114 ../../interactive.pm_.c:269
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:357
-#: ../../my_gtk.pm_.c:360 ../../my_gtk.pm_.c:617
-#: ../../standalone/drakgw_.c:639 ../../standalone/draknet_.c:95
-#: ../../standalone/draknet_.c:127 ../../standalone/draknet_.c:295
-#: ../../standalone/draknet_.c:485 ../../standalone/draknet_.c:631
-#: ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr ""
-
-#: ../../bootlook.pm_.c:315
-msgid "can not open /etc/inittab for reading: $!"
-msgstr ""
-
-#: ../../bootlook.pm_.c:369
-msgid "can not open /etc/sysconfig/autologin for reading: $!"
-msgstr ""
-
-#: ../../bootlook.pm_.c:435 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:21 ../../diskdrake.pm_.c:462
-msgid "Create"
-msgstr "Creu"
-
-#: ../../diskdrake.pm_.c:22
-msgid "Unmount"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:464
-msgid "Delete"
-msgstr "Dileu"
-
-#: ../../diskdrake.pm_.c:23
-msgid "Format"
-msgstr "Fformatio"
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:653
-msgid "Resize"
-msgstr "Newid maint"
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:462
-#: ../../diskdrake.pm_.c:518
-msgid "Type"
-msgstr "Math"
-
-#: ../../diskdrake.pm_.c:24 ../../diskdrake.pm_.c:539
-msgid "Mount point"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:38
-msgid "Write /etc/fstab"
-msgstr "Ysgrifennu /etc/fstab"
-
-#: ../../diskdrake.pm_.c:39
-msgid "Toggle to expert mode"
-msgstr "Cyffredinol > Arbennigwr"
-
-#: ../../diskdrake.pm_.c:40
-msgid "Toggle to normal mode"
-msgstr "Arbennigwr > Cyffredinol"
-
-#: ../../diskdrake.pm_.c:41
-msgid "Restore from file"
-msgstr "Llwytho o ffeil"
-
-#: ../../diskdrake.pm_.c:42
-msgid "Save in file"
-msgstr "Arbed i ffeil"
-
-#: ../../diskdrake.pm_.c:43
-msgid "Wizard"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:44
-msgid "Restore from floppy"
-msgstr "Llwytho o flopi"
-
-#: ../../diskdrake.pm_.c:45
-msgid "Save on floppy"
-msgstr "Arbed ar flopi"
-
-#: ../../diskdrake.pm_.c:49
-msgid "Clear all"
-msgstr "Clirio i gyd"
-
-#: ../../diskdrake.pm_.c:54
-msgid "Format all"
-msgstr "Fformatio i gyd"
-
-#: ../../diskdrake.pm_.c:55
-msgid "Auto allocate"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:59
-msgid "All primary partitions are used"
-msgstr "Mae pob rhaniad cynradd wedi ei ddefnyddio"
-
-#: ../../diskdrake.pm_.c:59
-msgid "I can't add any more partition"
-msgstr "Alla'i ddim ychwanegu unrhyw raniadau ychwanegol"
-
-#: ../../diskdrake.pm_.c:59
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "I gael mwy o raniadau, dilëwch un er mwyn gallu creu rhaniad estynedig"
-
-#: ../../diskdrake.pm_.c:61
-msgid "Not enough space for auto-allocating"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:63
-msgid "Undo"
-msgstr "Dadwneud"
-
-#: ../../diskdrake.pm_.c:64
-msgid "Write partition table"
-msgstr "Sgrifennu y tabl rhaniadau"
-
-#: ../../diskdrake.pm_.c:65 ../../install_steps_interactive.pm_.c:185
-#, fuzzy
-msgid "More"
-msgstr "Symud"
-
-#: ../../diskdrake.pm_.c:116
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:116
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:116
-msgid "HFS"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:116
-msgid "SunOS"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:116
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:117
-msgid "Empty"
-msgstr "Gwag"
-
-#: ../../diskdrake.pm_.c:117 ../../install_steps_gtk.pm_.c:407
-#: ../../mouse.pm_.c:145
-msgid "Other"
-msgstr "Arall"
-
-#: ../../diskdrake.pm_.c:123
-msgid "Filesystem types:"
-msgstr "Mathau ffeil-system:"
-
-#: ../../diskdrake.pm_.c:132 ../../install_steps_gtk.pm_.c:577
-msgid "Details"
-msgstr "Manylion"
-
-#: ../../diskdrake.pm_.c:147
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:152
-msgid "Please make a backup of your data first"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:152 ../../diskdrake.pm_.c:170
-#: ../../diskdrake.pm_.c:179 ../../diskdrake.pm_.c:570
-#: ../../diskdrake.pm_.c:592
-msgid "Read carefully!"
-msgstr "Darllenwch yn ofalus!"
-
-#: ../../diskdrake.pm_.c:155
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:170
-msgid "Be careful: this operation is dangerous."
-msgstr ""
-
-#: ../../diskdrake.pm_.c:214 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:322 ../../standalone/diskdrake_.c:66
-msgid "Error"
-msgstr "Gwall"
-
-#: ../../diskdrake.pm_.c:238 ../../diskdrake.pm_.c:748
-msgid "Mount point: "
-msgstr ""
-
-#: ../../diskdrake.pm_.c:239 ../../diskdrake.pm_.c:298
-msgid "Device: "
-msgstr "Dyfais: "
-
-#: ../../diskdrake.pm_.c:240
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Llythyren disg-yrrwr yn DOS: %s (dim ond dyfalu)\n"
-
-#: ../../diskdrake.pm_.c:244 ../../diskdrake.pm_.c:251
-#: ../../diskdrake.pm_.c:301
-msgid "Type: "
-msgstr "Math: "
-
-#: ../../diskdrake.pm_.c:248
-msgid "Name: "
-msgstr ""
-
-#: ../../diskdrake.pm_.c:253
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Dechrau: sector %s\n"
-
-#: ../../diskdrake.pm_.c:254
-#, c-format
-msgid "Size: %s"
-msgstr "Maint: %s"
-
-#: ../../diskdrake.pm_.c:256
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sector"
-
-#: ../../diskdrake.pm_.c:258
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Silindr %d i silindr %d\n"
-
-#: ../../diskdrake.pm_.c:259
-msgid "Formatted\n"
-msgstr "Wedi fformatio\n"
-
-#: ../../diskdrake.pm_.c:260
-msgid "Not formatted\n"
-msgstr "Heb ei fformatio\n"
-
-#: ../../diskdrake.pm_.c:261
-msgid "Mounted\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:262
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake.pm_.c:264
-#, c-format
-msgid "Loopback file(s): %s\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:265
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Y rhaniad i'w bwtio fel rheol\n"
-"    (ar gyfer bwt MS-DOS, nid ar gyfer lilo)\n"
-
-#: ../../diskdrake.pm_.c:267
-#, c-format
-msgid "Level %s\n"
-msgstr "Lefel %s\n"
-
-#: ../../diskdrake.pm_.c:268
-#, c-format
-msgid "Chunk size %s\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:269
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:271
-#, c-format
-msgid "Loopback file name: %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:274
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:277
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:294
-#, fuzzy
-msgid "Please click on a partition"
-msgstr "Creu rhaniad newydd"
-
-#: ../../diskdrake.pm_.c:299
-#, c-format
-msgid "Size: %s\n"
-msgstr "Maint: %s\n"
-
-#: ../../diskdrake.pm_.c:300
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometreg: %s silindr, %s pen, %s sector\n"
-
-#: ../../diskdrake.pm_.c:302
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:303
-#, fuzzy, c-format
-msgid "Partition table type: %s\n"
-msgstr "Sgrifennu y tabl rhaniadau"
-
-#: ../../diskdrake.pm_.c:304
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "ar fws %d id %d\n"
-
-#: ../../diskdrake.pm_.c:320
-msgid "Mount"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:322
-msgid "Active"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:324
-msgid "Add to RAID"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:326
-msgid "Remove from RAID"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:328
-msgid "Modify RAID"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:330
-msgid "Add to LVM"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:332
-msgid "Remove from LVM"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:334
-msgid "Use for loopback"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:341
-msgid "Choose action"
-msgstr "Dewiswch weithred"
-
-#: ../../diskdrake.pm_.c:435
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Mae'n flin gen i ond ni alla'i dderbyn creu /boot mor bell o ddechrau'r disg "
-"(ar silindr > 1024).\n"
-"Naill ai nad ydych yn defnyddio LILO a ddim angen /boot neu byddwch yn "
-"defnyddio LILO a ni fydd yn gweithio."
-
-#: ../../diskdrake.pm_.c:439
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Mae'r rhaniad rydych wedi dewis ychwanegu fel y gwraidd (/) wedi'i leoli yn "
-"bellach na 1024ed silindr eich disg a nid oes gennych rhaniad /boot.\n"
-"Os ydych yn bwriadu defnyddio y rheolwr bwtio LILO, nodwch fe ddylech greu "
-"rhaniad /boot"
-
-#: ../../diskdrake.pm_.c:445
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:462 ../../diskdrake.pm_.c:464
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:468
-msgid "Use ``Unmount'' first"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:469 ../../diskdrake.pm_.c:513
-#, fuzzy, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "fe fydd yr holl wybodaeth ar y rhaniad yma yn cael ei ddileu"
-
-#: ../../diskdrake.pm_.c:481
-msgid "Continue anyway?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:486
-msgid "Quit without saving"
-msgstr "Gorffen heb arbed"
-
-#: ../../diskdrake.pm_.c:486
-msgid "Quit without writing the partition table?"
-msgstr "Gorffen heb ysgrifennu y tabl rhaniadau?"
-
-#: ../../diskdrake.pm_.c:516
-msgid "Change partition type"
-msgstr "Newid math y rhaniad"
-
-#: ../../diskdrake.pm_.c:517
-#, fuzzy
-msgid "Which filesystem do you want?"
-msgstr "Pa fath o rhaniad ydych chi eisiau?"
-
-#: ../../diskdrake.pm_.c:520 ../../diskdrake.pm_.c:780
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:537
-#, fuzzy, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Pa sector hoffech chi symud iddo?"
-
-#: ../../diskdrake.pm_.c:538
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:542
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:561
-#, fuzzy, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "fe fydd yr holl wybodaeth ar y rhaniad yma yn cael ei ddileu"
-
-#: ../../diskdrake.pm_.c:563
-msgid "Formatting"
-msgstr "Fformatio"
-
-#: ../../diskdrake.pm_.c:564
-#, fuzzy, c-format
-msgid "Formatting loopback file %s"
-msgstr "Yn fformatio rhaniad %s"
-
-#: ../../diskdrake.pm_.c:565 ../../install_steps_interactive.pm_.c:430
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Yn fformatio rhaniad %s"
-
-#: ../../diskdrake.pm_.c:570
-msgid "After formatting all partitions,"
-msgstr "Ar ôl fformatio pob rhaniad,"
-
-#: ../../diskdrake.pm_.c:570
-msgid "all data on these partitions will be lost"
-msgstr "mi fydd yr holl wybodaeth ar y rhaniadau yma yn cael ei ddileu"
-
-#: ../../diskdrake.pm_.c:576
-msgid "Move"
-msgstr "Symud"
-
-#: ../../diskdrake.pm_.c:577
-msgid "Which disk do you want to move it to?"
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../diskdrake.pm_.c:578
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake.pm_.c:579
-msgid "Which sector do you want to move it to?"
-msgstr "Pa sector hoffech chi symud iddo?"
-
-#: ../../diskdrake.pm_.c:582
-msgid "Moving"
-msgstr "Symud"
-
-#: ../../diskdrake.pm_.c:582
-msgid "Moving partition..."
-msgstr "Yn symud rhaniad.."
-
-#: ../../diskdrake.pm_.c:592
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Mae tabl rhaniad disg-yrrwr %s am gael ei ysgrifennu i'r disg!"
-
-#: ../../diskdrake.pm_.c:594
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Mi fydd angen i chi ail-fwtio cyn i'r newidiadau gymeryd lle"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Computing FAT filesystem bounds"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615 ../../diskdrake.pm_.c:680
-#: ../../install_interactive.pm_.c:107
-msgid "Resizing"
-msgstr "Newid maint"
-
-#: ../../diskdrake.pm_.c:643
-#, fuzzy
-msgid "This partition is not resizeable"
-msgstr "Pa fath o rhaniad ydych chi eisiau?"
-
-#: ../../diskdrake.pm_.c:648
-#, fuzzy
-msgid "All data on this partition should be backed-up"
-msgstr "fe fydd yr holl wybodaeth ar y rhaniad yma yn cael ei ddileu"
-
-#: ../../diskdrake.pm_.c:650
-#, fuzzy, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "fe fydd yr holl wybodaeth ar y rhaniad yma yn cael ei ddileu"
-
-#: ../../diskdrake.pm_.c:660
-msgid "Choose the new size"
-msgstr "Dewiswch y maint newydd"
-
-#: ../../diskdrake.pm_.c:660 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../diskdrake.pm_.c:714
-msgid "Create a new partition"
-msgstr "Creu rhaniad newydd"
-
-#: ../../diskdrake.pm_.c:740
-msgid "Start sector: "
-msgstr "Sector dechreuol: "
-
-#: ../../diskdrake.pm_.c:744 ../../diskdrake.pm_.c:819
-msgid "Size in MB: "
-msgstr "Maint mewn MB: "
-
-#: ../../diskdrake.pm_.c:747 ../../diskdrake.pm_.c:822
-msgid "Filesystem type: "
-msgstr "Math o ffeilsystem: "
-
-#: ../../diskdrake.pm_.c:750
-msgid "Preference: "
-msgstr ""
-
-#: ../../diskdrake.pm_.c:798
-msgid "This partition can't be used for loopback"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:808
-msgid "Loopback"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:818
-msgid "Loopback file name: "
-msgstr ""
-
-#: ../../diskdrake.pm_.c:844
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:845
-msgid "File already exists. Use it?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:867 ../../diskdrake.pm_.c:883
-msgid "Select file"
-msgstr "Dewiswch ffeil"
-
-#: ../../diskdrake.pm_.c:876
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:884
-msgid "Warning"
-msgstr "Rhybudd"
-
-#: ../../diskdrake.pm_.c:885
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Rhowch flopi yn y disg-yrrwr\n"
-"Mi fydd yr holl wybodaeth ar y fflopi yma yn gael ei ddileu"
-
-#: ../../diskdrake.pm_.c:896
-msgid "Trying to rescue partition table"
-msgstr "Yn trio achub y tabl rhaniadau"
-
-#: ../../diskdrake.pm_.c:905
-msgid "device"
-msgstr "dyfais"
-
-#: ../../diskdrake.pm_.c:906
-msgid "level"
-msgstr "lefel"
-
-#: ../../diskdrake.pm_.c:907
-msgid "chunk size"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:919
-msgid "Choose an existing RAID to add to"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:920 ../../diskdrake.pm_.c:946
-msgid "new"
-msgstr "newydd"
-
-#: ../../diskdrake.pm_.c:944
-msgid "Choose an existing LVM to add to"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:949
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:976
-msgid "Removable media automounting"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:977
-msgid "Rescue partition table"
-msgstr "Achub y tabl rhaniadau"
-
-#: ../../diskdrake.pm_.c:979
-msgid "Reload"
-msgstr "Ail-lwytho"
-
-#: ../../fs.pm_.c:88 ../../fs.pm_.c:95 ../../fs.pm_.c:101 ../../fs.pm_.c:107
-#: ../../fs.pm_.c:113
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "mi fethodd y %s fformatio o %s"
-
-#: ../../fs.pm_.c:143
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr ""
-
-#: ../../fs.pm_.c:230
-msgid "mount failed: "
-msgstr ""
-
-#: ../../fs.pm_.c:242
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:21
-#, fuzzy
-msgid "simple"
-msgstr "Ffeil"
-
-#: ../../fsedit.pm_.c:30
-#, fuzzy
-msgid "server"
-msgstr "Gweinydd X"
-
-#: ../../fsedit.pm_.c:262
-msgid "Mount points must begin with a leading /"
-msgstr ""
-
-#: ../../fsedit.pm_.c:265
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:273
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:285
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:286
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:287
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:369
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:453
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:467
-msgid "You don't have any partitions!"
-msgstr "Does gennych chi ddim rhaniadau!"
-
-#: ../../help.pm_.c:9
-#, fuzzy
-msgid ""
-"Please choose your preferred language for installation and system usage."
-msgstr "Dewiswch yr iaith hoffech weld ar gyfer gosodiad a defnydd y system"
-
-#: ../../help.pm_.c:12
-msgid ""
-"You need to accept the terms of the above license to continue installation.\n"
-"\n"
-"\n"
-"Please click on \"Accept\" if you agree with its terms.\n"
-"\n"
-"\n"
-"Please click on \"Refuse\" if you disagree with its terms. Installation will "
-"end without modifying your current\n"
-"configuration."
-msgstr ""
-
-#: ../../help.pm_.c:22
-msgid "Choose the layout corresponding to your keyboard from the list above"
-msgstr ""
-
-#: ../../help.pm_.c:25
-msgid ""
-"If you wish other languages (than the one you choose at\n"
-"beginning of installation) will be available after installation, please "
-"chose\n"
-"them in list above. If you want select all, you just need to select \"All\"."
-msgstr ""
-
-#: ../../help.pm_.c:30
-msgid ""
-"Please choose \"Install\" if there are no previous version of Linux-"
-"Mandrake\n"
-"installed or if you wish to use several operating systems.\n"
-"\n"
-"\n"
-"Please choose \"Update\" if you wish to update an already installed version "
-"of Linux-Mandrake.\n"
-"\n"
-"\n"
-"Depend of your knowledge in GNU/Linux, you can choose one of the following "
-"levels to install or update your\n"
-"Linux-Mandrake operating system:\n"
-"\n"
-"\t* Recommended: if you have never installed a GNU/Linux operating system "
-"choose this. Installation will be\n"
-"\t  be very easy and you will be asked only on few questions.\n"
-"\n"
-"\n"
-"\t* Customized: if you are familiar enough with GNU/Linux, you may choose "
-"the primary usage (workstation, server,\n"
-"\t  development) of your system. You will need to answer to more questions "
-"than in \"Recommended\" installation\n"
-"\t  class, so you need to know how GNU/Linux works to choose this "
-"installation class.\n"
-"\n"
-"\n"
-"\t* Expert: if you have a good knowledge in GNU/Linux, you can choose this "
-"installation class. As in \"Customized\"\n"
-"\t  installation class, you will be able to choose the primary usage "
-"(workstation, server, development). Be very\n"
-"\t  careful before choose this installation class. You will be able to "
-"perform a higly customized installation.\n"
-"\t  Answer to some questions can be very difficult if you haven't a good "
-"knowledge in GNU/Linux. So, don't choose\n"
-"\t  this installation class unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:56
-msgid ""
-"Select:\n"
-"\n"
-"  - Customized: If you are familiar enough with GNU/Linux, you may then "
-"choose\n"
-"    the primary usage for your machine. See below for details.\n"
-"\n"
-"\n"
-"  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-"    perform a highly customized installation. As for a \"Customized\"\n"
-"    installation class, you will be able to select the usage for your "
-"system.\n"
-"    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-"DOING!"
-msgstr ""
-
-#: ../../help.pm_.c:68
-msgid ""
-"You must now define your machine usage. Choices are:\n"
-"\n"
-"\t* Workstation: this the ideal choice if you intend to use your machine "
-"primarily for everyday use, at office or\n"
-"\t  at home.\n"
-"\n"
-"\n"
-"\t* Development: if you intend to use your machine primarily for software "
-"development, it is the good choice. You\n"
-"\t  will then have a complete collection of software installed in order to "
-"compile, debug and format source code,\n"
-"\t  or create software packages.\n"
-"\n"
-"\n"
-"\t* Server: if you intend to use this machine as a server, it is the good "
-"choice. Either a file server (NFS or\n"
-"\t  SMB), a print server (Unix style or Microsoft Windows style), an "
-"authentication server (NIS), a database\n"
-"\t  server and so on. As such, do not expect any gimmicks (KDE, GNOME, etc.) "
-"to be installed."
-msgstr ""
-
-#: ../../help.pm_.c:84
-msgid ""
-"DrakX will attempt to look for PCI SCSI adapter(s). If DrakX\n"
-"finds an SCSI adapter and knows which driver to use, it will be "
-"automatically\n"
-"installed.\n"
-"\n"
-"\n"
-"If you have no SCSI adapter, an ISA SCSI adapter or a PCI SCSI adapter that\n"
-"DrakX doesn't recognize, you will be asked if a SCSI adapter is present in "
-"your\n"
-"system. If there is no adapter present, you can click on \"No\". If you "
-"click on\n"
-"\"Yes\", a list of drivers will be presented from which you can select your\n"
-"specific adapter.\n"
-"\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for "
-"the\n"
-"options. This usually works well.\n"
-"\n"
-"\n"
-"If not, you will need to provide options to the driver. Please review the "
-"User\n"
-"Guide (chapter 3, section \"Collective informations on your hardware) for "
-"hints\n"
-"on retrieving this information from hardware documentation, from the\n"
-"manufacturer's Web site (if you have Internet access) or from Microsoft "
-"Windows\n"
-"(if you have it on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:108
-msgid ""
-"At this point, you need to choose where to install your\n"
-"Linux-Mandrake operating system on your hard drive. If it is empty or if an\n"
-"existing operating system uses all the space available on it, you need to\n"
-"partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Linux-Mandrake system.\n"
-"\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced "
-"user.\n"
-"This wizard simplifies this process. Before beginning, please consult the "
-"manual\n"
-"and take your time.\n"
-"\n"
-"\n"
-"You need at least two partitions. One is for the operating system itself and "
-"the\n"
-"other is for the virtual memory (also called Swap).\n"
-"\n"
-"\n"
-"If partitions have been already defined (from a previous installation or "
-"from\n"
-"another partitioning tool), you just need choose those to use to install "
-"your\n"
-"Linux system.\n"
-"\n"
-"\n"
-"If partitions haven't been already defined, you need to create them. \n"
-"To do that, use the wizard available above. Depending of your hard drive\n"
-"configuration, several solutions can be available:\n"
-"\n"
-"\t* Use existing partition: the wizard has detected one or more existing "
-"Linux partitions on your hard drive. If\n"
-"\t  you want to keep them, choose this option. \n"
-"\n"
-"\n"
-"\t* Erase entire disk: if you want delete all data and all partitions "
-"present on your hard drive and replace them by\n"
-"\t  your new Linux-Mandrake system, you can choose this option. Be careful "
-"with this solution, you will not be\n"
-"\t  able to revert your choice after confirmation.\n"
-"\n"
-"\n"
-"\t* Use the free space on the Windows partition: if Microsoft Windows is "
-"installed on your hard drive and takes\n"
-"\t  all space available on it, you have to create free space for Linux data. "
-"To do that you can delete your\n"
-"\t  Microsoft Windows partition and data (see \"Erase entire disk\" or "
-"\"Expert mode\" solutions) or resize your\n"
-"\t  Microsoft Windows partition. Resizing can be performed without loss of "
-"any data. This solution is\n"
-"\t  recommended if you want use both Linux-Mandrake and Microsoft Windows on "
-"same computer.\n"
-"\n"
-"\n"
-"\t  Before choosing this solution, please understand that the size of your "
-"Microsoft\n"
-"\t  Windows partition will be smaller than at present time. It means that "
-"you will have less free space under\n"
-"\t  Microsoft Windows to store your data or install new software.\n"
-"\n"
-"\n"
-"\t* Expert mode: if you want to partition manually your hard drive, you can "
-"choose this option. Be careful before\n"
-"\t  choosing this solution. It is powerful but it is very dangerous. You can "
-"lose all your data very easily. So,\n"
-"\t  don't choose this solution unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:160
-msgid ""
-"At this point, you need to choose what\n"
-"partition(s) to use to install your new Linux-Mandrake system. If "
-"partitions\n"
-"have been already defined (from a previous installation of GNU/Linux or "
-"from\n"
-"another partitioning tool), you can use existing partitions. In other "
-"cases,\n"
-"hard drive partitions must be defined.\n"
-"\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select "
-"the\n"
-"disk for partitioning by clicking on \"hda\" for the first IDE drive, \"hdb"
-"\" for\n"
-"the second or \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-"   * Clear all: this option deletes all partitions available on the selected "
-"hard drive.\n"
-"\n"
-"\n"
-"   * Auto allocate: this option allows you to automatically create Ext2 and "
-"swap partitions in free space of your\n"
-"     hard drive.\n"
-"\n"
-"\n"
-"   * Rescue partition table: if your partition table is damaged, you can try "
-"to recover it using this option. Please\n"
-"     be careful and remember that it can fail.\n"
-"\n"
-"\n"
-"   * Undo: you can use this option to cancel your changes.\n"
-"\n"
-"\n"
-"   * Reload: you can use this option if you wish to undo all changes and "
-"load your initial partitions table\n"
-"\n"
-"\n"
-"   * Wizard: If you wish to use a wizard to partition your hard drive, you "
-"can use this option. It is recommended if\n"
-"     you do not have a good knowledge in partitioning.\n"
-"\n"
-"\n"
-"   * Restore from floppy: if you have saved your partition table on a floppy "
-"during a previous installation, you can\n"
-"     recover it using this option.\n"
-"\n"
-"\n"
-"   * Save on floppy: if you wish to save your partition table on a floppy to "
-"be able to recover it, you can use this\n"
-"     option. It is strongly recommended to use this option\n"
-"\n"
-"\n"
-"   * Done: when you have finished partitioning your hard drive, use this "
-"option to save your changes.\n"
-"\n"
-"\n"
-"For information, you can reach any option using the keyboard: navigate "
-"trough the partitions using Tab and Up/Down arrows.\n"
-"\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-"           * Ctrl-c to create a new partition (when a empty partition is "
-"selected)\n"
-"\n"
-"           * Ctrl-d to delete a partition\n"
-"\n"
-"           * Ctrl-m to set the mount point\n"
-"           \n"
-"\n"
-"           \n"
-"If you are installing on a PPC Machine, you will want to create a small HFS "
-"'bootstrap' partition of at least 1MB for use\n"
-"by the yaboot bootloader. If you opt to make the partition a bit larger, say "
-"50MB, you may find it a useful place to store \n"
-"a spare kernel and ramdisk image for emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Above are listed the existing Linux partitions detected on\n"
-"your hard drive. You can keep choices make by the wizard, they are good for "
-"a\n"
-"common usage. If you change these choices, you must at least define a root\n"
-"partition (\"/\"). Don't choose a too little partition or you will not be "
-"able\n"
-"to install enough software. If you want store your data on a separate "
-"partition,\n"
-"you need also to choose a \"/home\" (only possible if you have more than "
-"one\n"
-"Linux partition available).\n"
-"\n"
-"\n"
-"For information, each partition is listed as follows: \"Name\", \"Capacity"
-"\".\n"
-"\n"
-"\n"
-"\"Name\" is coded as follow: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and "
-"\"sd\"\n"
-"if it is an SCSI hard drive.\n"
-"\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE "
-"hard drives:\n"
-"\n"
-"   * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-"   * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"\n"
-"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means "
-"\"secondary hard drive\", etc..."
-msgstr ""
-
-#: ../../help.pm_.c:258
-msgid ""
-"Choose the hard drive you want to erase to install your\n"
-"new Linux-Mandrake partition. Be careful, all data present on it will be "
-"lost\n"
-"and will not be recoverable."
-msgstr ""
-
-#: ../../help.pm_.c:263
-msgid ""
-"Click on \"OK\" if you want to delete all data and\n"
-"partitions present on this hard drive. Be careful, after clicking on \"OK\", "
-"you\n"
-"will not be able to recover any data and partitions present on this hard "
-"drive,\n"
-"including any Windows data.\n"
-"\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../help.pm_.c:273
-msgid ""
-"More than one Microsoft Windows partition have been\n"
-"detected on your hard drive. Please choose the one you want resize to "
-"install\n"
-"your new Linux-Mandrake operating system.\n"
-"\n"
-"\n"
-"For information, each partition is listed as follow; \"Linux name\", "
-"\"Windows\n"
-"name\" \"Capacity\".\n"
-"\n"
-"\"Linux name\" is coded as follow: \"hard drive type\", \"hard drive number"
-"\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and \"sd"
-"\"\n"
-"if it is an SCSI hard drive.\n"
-"\n"
-"\n"
-"\"Hard drive number\" is always a letter putted after \"hd\" or \"sd\". With "
-"IDE hard drives:\n"
-"\n"
-"   * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-"   * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means "
-"\"secondary hard drive\", etc.\n"
-"\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first "
-"disk\n"
-"or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:306
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:309
-msgid ""
-"Any partitions that have been newly defined must be\n"
-"formatted for use (formatting meaning creating a filesystem).\n"
-"\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to "
-"erase\n"
-"the data they contain. If you wish do that, please also select the "
-"partitions\n"
-"you want to format.\n"
-"\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing "
-"partitions.\n"
-"You must reformat the partitions containing the operating system (such as \"/"
-"\",\n"
-"\"/usr\" or \"/var\") but do you no have to reformat partitions containing "
-"data\n"
-"that you wish to keep (typically /home).\n"
-"\n"
-"\n"
-"Please be careful selecting partitions, after formatting, all data will be\n"
-"deleted and you will not be able to recover any of them.\n"
-"\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"\n"
-"Click on \"Cancel\" if you want to choose other partitions to install your "
-"new\n"
-"Linux-Mandrake operating system."
-msgstr ""
-
-#: ../../help.pm_.c:335
-msgid ""
-"You may now select the group of packages you wish to\n"
-"install or upgrade.\n"
-"\n"
-"\n"
-"DrakX will then check whether you have enough room to install them all. If "
-"not,\n"
-"it will warn you about it. If you want to go on anyway, it will proceed onto "
-"the\n"
-"installation of all selected groups but will drop some packages of lesser\n"
-"interest. At the bottom of the list you can select the option \n"
-"\"Individual package selection\"; in this case you will have to browse "
-"through\n"
-"more than 1000 packages..."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"You can now choose individually all the packages you\n"
-"wish to install.\n"
-"\n"
-"\n"
-"You can expand or collapse the tree by clicking on options in the left "
-"corner of\n"
-"the packages window.\n"
-"\n"
-"\n"
-"If you prefer to see packages sorted in alphabetic order, click on the icon\n"
-"\"Toggle flat and group sorted\".\n"
-"\n"
-"\n"
-"If you want not to be warned on dependencies, click on \"Automatic\n"
-"dependencies\". If you do this, note that unselecting one package may "
-"silently\n"
-"unselect several other packages which depend on it."
-msgstr ""
-
-#: ../../help.pm_.c:364
-msgid ""
-"If you have all the CDs in the list above, click Ok. If you have\n"
-"none of those CDs, click Cancel. If only some CDs are missing, unselect "
-"them,\n"
-"then click Ok."
-msgstr ""
-
-#: ../../help.pm_.c:369
-msgid ""
-"Your new Linux-Mandrake operating system is currently being\n"
-"installed. This operation should take a few minutes (it depends on size you\n"
-"choose to install and the speed of your computer).\n"
-"\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:377
-msgid ""
-"You can now test your mouse. Use buttons and wheel to verify\n"
-"if settings are good. If not, you can click on \"Cancel\" to choose another\n"
-"driver."
-msgstr ""
-
-#: ../../help.pm_.c:382
-msgid ""
-"Please select the correct port. For example, the COM1\n"
-"port under MS Windows is named ttyS0 under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:386
-msgid ""
-"If you wish to connect your computer to the Internet or\n"
-"to a local network please choose the correct option. Please turn on your "
-"device\n"
-"before choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"\n"
-"If you do not have any connection to the Internet or a local network, "
-"choose\n"
-"\"Disable networking\".\n"
-"\n"
-"\n"
-"If you wish to configure the network later after installation or if you "
-"have\n"
-"finished to configure your network connection, choose \"Done\"."
-msgstr ""
-
-#: ../../help.pm_.c:399
-msgid ""
-"No modem has been detected. Please select the serial port on which it is "
-"plugged.\n"
-"\n"
-"\n"
-"For information, the first serial port (called \"COM1\" under Microsoft\n"
-"Windows) is called \"ttyS0\" under Linux."
-msgstr ""
-
-#: ../../help.pm_.c:406
-msgid ""
-"You may now enter dialup options. If you don't know\n"
-"or are not sure what to enter, the correct informations can be obtained "
-"from\n"
-"your Internet Service Provider. If you do not enter the DNS (name server)\n"
-"information here, this information will be obtained from your Internet "
-"Service\n"
-"Provider at connection time."
-msgstr ""
-
-#: ../../help.pm_.c:413
-msgid ""
-"If your modem is an external modem, please turn on it now to let DrakX "
-"detect it automatically."
-msgstr ""
-
-#: ../../help.pm_.c:416
-msgid "Please turn on your modem and choose the correct one."
-msgstr ""
-
-#: ../../help.pm_.c:419
-msgid ""
-"If you are not sure if informations above are\n"
-"correct or if you don't know or are not sure what to enter, the correct\n"
-"informations can be obtained from your Internet Service Provider. If you do "
-"not\n"
-"enter the DNS (name server) information here, this information will be "
-"obtained\n"
-"from your Internet Service Provider at connection time."
-msgstr ""
-
-#: ../../help.pm_.c:426
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, the correct informations can be\n"
-"obtained from your Internet Service Provider."
-msgstr ""
-
-#: ../../help.pm_.c:431
-msgid ""
-"You may now configure your network device.\n"
-"\n"
-"   * IP address: if you don't know or are not sure what to enter, ask your "
-"network administrator.\n"
-"     You should not enter an IP address if you select the option \"Automatic "
-"IP\" below.\n"
-"\n"
-"   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-"know or are not sure what to enter,\n"
-"     ask your network administrator.\n"
-"\n"
-"   * Automatic IP: if your network uses BOOTP or DHCP protocol, select this "
-"option. If selected, no value is needed in\n"
-"    \"IP address\". If you don't know or are not sure if you need to select "
-"this option, ask your network administrator."
-msgstr ""
-
-#: ../../help.pm_.c:443
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, ask your network administrator."
-msgstr ""
-
-#: ../../help.pm_.c:447
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, leave blank."
-msgstr ""
-
-#: ../../help.pm_.c:451
-msgid ""
-"You may now enter dialup options. If you're not sure what to enter, the\n"
-"correct information can be obtained from your ISP."
-msgstr ""
-
-#: ../../help.pm_.c:455
-msgid ""
-"If you will use proxies, please configure them now. If you don't know if\n"
-"you should use proxies, ask your network administrator or your ISP."
-msgstr ""
-
-#: ../../help.pm_.c:459
-msgid ""
-"You can install cryptographic package if your internet connection has been\n"
-"set up correctly. First choose a mirror where you wish to download packages "
-"and\n"
-"after that select the packages to install.\n"
-"\n"
-"\n"
-"Note you have to select mirror and cryptographic packages according\n"
-"to your legislation."
-msgstr ""
-
-#: ../../help.pm_.c:468
-msgid "You can now select your timezone according to where you live."
-msgstr ""
-
-#: ../../help.pm_.c:471
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage\n"
-"Time) and translates it in local time according to the time zone you have\n"
-"selected.\n"
-"\n"
-"\n"
-"If you use Microsoft Windows on this computer, choose \"No\"."
-msgstr ""
-
-#: ../../help.pm_.c:479
-msgid ""
-"You may now choose which services you want to start at boot time.\n"
-"\n"
-"\n"
-"When your mouse comes over an item, a small balloon help will popup which\n"
-"describes the role of the service.\n"
-"\n"
-"\n"
-"Be very careful in this step if you intend to use your machine as a server: "
-"you\n"
-"will probably want not to start any services that you don't need. Please\n"
-"remember that several services can be dangerous if they are enable on a "
-"server.\n"
-"In general, select only the services that you really need."
-msgstr ""
-
-#: ../../help.pm_.c:492
-msgid ""
-"You can configure a local printer (connected to your computer) or remote\n"
-"printer (accessible via a Unix, Netware or Microsoft Windows network)."
-msgstr ""
-
-#: ../../help.pm_.c:496
-msgid ""
-"If you wish to be able to print, please choose one printing system between\n"
-"CUPS and LPR.\n"
-"\n"
-"\n"
-"CUPS is a new, powerful and flexible printing system for Unix systems (CUPS\n"
-"means \"Common Unix Printing System\"). It is the default printing system "
-"in\n"
-"Linux-Mandrake.\n"
-"\n"
-"\n"
-"LPR is the old printing system used in previous Linux-Mandrake "
-"distributions.\n"
-"\n"
-"\n"
-"If you don't have printer, click on \"None\"."
-msgstr ""
-
-#: ../../help.pm_.c:511
-msgid ""
-"GNU/Linux can deal with many types of printer. Each of these types requires\n"
-"a different setup.\n"
-"\n"
-"\n"
-"If your printer is physically connected to your computer, select \"Local\n"
-"printer\".\n"
-"\n"
-"\n"
-"If you want to access a printer located on a remote Unix machine, select\n"
-"\"Remote printer\".\n"
-"\n"
-"\n"
-"If you want to access a printer located on a remote Microsoft Windows "
-"machine\n"
-"(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-msgstr ""
-
-#: ../../help.pm_.c:527
-msgid ""
-"Please turn on your printer before continuing to let DrakX detect it.\n"
-"\n"
-"You have to enter some informations here.\n"
-"\n"
-"\n"
-"   * Name of printer: the print spooler uses \"lp\" as default printer name. "
-"So, you must have a printer named \"lp\".\n"
-"     If you have only one printer, you can use several names for it. You "
-"just need to separate them by a pipe\n"
-"     character (a \"|\"). So, if you prefer a more meaningful name, you have "
-"to put it first, eg: \"My printer|lp\".\n"
-"     The printer having \"lp\" in its name(s) will be the default printer.\n"
-"\n"
-"\n"
-"   * Description: this is optional but can be useful if several printers are "
-"connected to your computer or if you allow\n"
-"     other computers to access to this printer.\n"
-"\n"
-"\n"
-"   * Location: if you want to put some information on your\n"
-"     printer location, put it here (you are free to write what\n"
-"     you want, for example \"2nd floor\").\n"
-msgstr ""
-
-#: ../../help.pm_.c:548
-msgid ""
-"You need to enter some informations here.\n"
-"\n"
-"\n"
-"   * Name of queue: the print spooler uses \"lp\" as default printer name. "
-"So, you need have a printer named \"lp\".\n"
-"    If you have only one printer, you can use several names for it. You just "
-"need to separate them by a pipe\n"
-"    character (a \"|\"). So, if you prefer to have a more meaningful name, "
-"you have to put it first, eg: \"My printer|lp\".\n"
-"    The printer having \"lp\" in its name(s) will be the default printer.\n"
-"\n"
-"  \n"
-"   * Spool directory: it is in this directory that printing jobs are stored. "
-"Keep the default choice\n"
-"     if you don't know what to use\n"
-"\n"
-"\n"
-"   * Printer Connection: If your printer is physically connected to your "
-"computer, select \"Local printer\".\n"
-"     If you want to access a printer located on a remote Unix machine, "
-"select \"Remote lpd printer\".\n"
-"\n"
-"\n"
-"     If you want to access a printer located on a remote Microsoft Windows "
-"machine (or on Unix machine using SMB\n"
-"     protocol), select \"SMB/Windows 95/98/NT\".\n"
-"\n"
-"\n"
-"     If you want to acces a printer located on NetWare network, select "
-"\"NetWare\".\n"
-msgstr ""
-
-#: ../../help.pm_.c:573
-msgid ""
-"Your printer has not been detected. Please enter the name of the device on\n"
-"which it is connected.\n"
-"\n"
-"\n"
-"For information, most printers are connected on the first parallel port. "
-"This\n"
-"one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-"Windows."
-msgstr ""
-
-#: ../../help.pm_.c:581
-msgid "You must now select your printer in the above list."
-msgstr ""
-
-#: ../../help.pm_.c:584
-msgid ""
-"Please select the right options according to your printer.\n"
-"Please see its documentation if you don't know what choose here.\n"
-"\n"
-"\n"
-"You will be able to test your configuration in next step and you will be "
-"able to modify it if it doesn't work as you want."
-msgstr ""
-
-#: ../../help.pm_.c:591
-msgid ""
-"You can now enter the root password for your Linux-Mandrake system.\n"
-"The password must be entered twice to verify that both password entries are "
-"identical.\n"
-"\n"
-"\n"
-"Root is the system's administrator and is the only user allowed to modify "
-"the\n"
-"system configuration. Therefore, choose this password carefully. \n"
-"Unauthorized use of the root account can be extemely dangerous to the "
-"integrity\n"
-"of the system, its data and other system connected to it.\n"
-"\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. It should never be written down.\n"
-"\n"
-"\n"
-"Do not make the password too long or complicated, though: you must be able "
-"to\n"
-"remember it without too much effort."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"To enable a more secure system, you should select \"Use shadow file\" and\n"
-"\"Use MD5 passwords\"."
-msgstr ""
-
-#: ../../help.pm_.c:613
-msgid ""
-"If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n"
-"network administrator."
-msgstr ""
-
-#: ../../help.pm_.c:617
-msgid ""
-"You may now create one or more \"regular\" user account(s), as\n"
-"opposed to the \"privileged\" user account, root. You can create\n"
-"one or more account(s) for each person you want to allow to use\n"
-"the computer. Note that each user account will have its own\n"
-"preferences (graphical environment, program settings, etc.)\n"
-"and its own \"home directory\", in which these preferences are\n"
-"stored.\n"
-"\n"
-"\n"
-"First of all, create an account for yourself! Even if you will be the only "
-"user\n"
-"of the machine, you may NOT connect as root for daily use of the system: "
-"it's a\n"
-"very high security risk. Making the system unusable is very often a typo "
-"away.\n"
-"\n"
-"\n"
-"Therefore, you should connect to the system using the user account\n"
-"you will have created here, and login as root only for administration\n"
-"and maintenance purposes."
-msgstr ""
-
-#: ../../help.pm_.c:636
-msgid ""
-"Creating a boot disk is strongly recommended. If you can't\n"
-"boot your computer, it's the only way to rescue your system without\n"
-"reinstalling it."
-msgstr ""
-
-#: ../../help.pm_.c:641
-msgid ""
-"You need to indicate where you wish\n"
-"to place the information required to boot to GNU/Linux.\n"
-"\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of\n"
-"drive (MBR)\"."
-msgstr ""
-
-#: ../../help.pm_.c:649
-msgid ""
-"Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-" (primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-msgstr ""
-
-#: ../../help.pm_.c:653
-msgid ""
-"LILO (the LInux LOader) and Grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"You may also want not to give access to these other operating systems to\n"
-"anyone, in which case you can delete the corresponding entries. But\n"
-"in this case, you will need a boot disk in order to boot them!"
-msgstr ""
-
-#: ../../help.pm_.c:665
-msgid ""
-"LILO and grub main options are:\n"
-"  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-"partition) that contains the boot sector. Unless you know specifically\n"
-"otherwise, choose \"/dev/hda\".\n"
-"\n"
-"\n"
-"  - Delay before booting default image: Specifies the number in tenths\n"
-"of a second the boot loader should wait before booting the first image.\n"
-"This is useful on systems that immediately boot from the hard disk after\n"
-"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-"omitted or is set to zero.\n"
-"\n"
-"\n"
-"  - Video mode: This specifies the VGA text mode that should be selected\n"
-"when booting. The following values are available: \n"
-"\n"
-"    * normal: select normal 80x25 text mode.\n"
-"\n"
-"    * <number>:  use the corresponding text mode.\n"
-"\n"
-"\n"
-"  - Clean \"/tmp\" at each boot: if you want delete all files and "
-"directories\n"
-"stored in \"/tmp\" when you boot your system, select this option.\n"
-"\n"
-"\n"
-"  - Precise RAM if needed: unfortunately, there is no standard method to ask "
-"the\n"
-"BIOS about the amount of RAM present in your computer. As consequence, Linux "
-"may\n"
-"fail to detect your amount of RAM correctly. If this is the case, you can\n"
-"specify the correct amount or RAM here. Please note that a difference of 2 "
-"or 4\n"
-"MB between detected memory and memory present in your system is normal."
-msgstr ""
-
-#: ../../help.pm_.c:697
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n"
-"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"Yaboot main options are:\n"
-"\n"
-"\n"
-"  - Init Message: A simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-"\n"
-"  - Boot Device: Indicate where you want to place the information required "
-"to \n"
-"boot to GNU/Linux. Generally, you will have setup a bootstrap partition "
-"earlier \n"
-"to hold this information.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: Unlike LILO, there are two delays available with \n"
-"yaboot.  The first delay is measured in seconds and at this point you can \n"
-"choose between CD, OF boot, MacOS, or Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: This timeout is similar to the LILO boot delay.  "
-"After \n"
-"selecting Linux, you will have this delay in 0.1 seconds before your "
-"default\n"
-"kernel description is selected.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: Checking this option will allow you to choose 'C' for "
-"CD at\n"
-"the first boot prompt.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: Checking this option will allow you to choose 'N' for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-"\n"
-"  - Default OS: You can select which OS will boot by default when the Open "
-"Firmware \n"
-"Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:738
-msgid ""
-"You can add additional entries for yaboot, either for other operating "
-"systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"\n"
-"For other OS's - the entry consists only of a label and the root partition.\n"
-"\n"
-"\n"
-"For Linux, there are a few possible options: \n"
-"\n"
-"\n"
-"  - Label: This is simply the name will type at the yaboot prompt to select "
-"this \n"
-"boot option.\n"
-"\n"
-"\n"
-"  - Image: This would be the name of the kernel to boot.  Typically vmlinux "
-"or\n"
-"a variation of vmlinux with an extension.\n"
-"\n"
-"\n"
-"  - Root: The root device or '/' for your Linux installation.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: On Apple hardware, the kernel append option is used quite often "
-"to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button "
-"emulation\n"
-"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The "
-"following \n"
-"are some examples:\n"
-"\n"
-"\n"
-"\t\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: This option can be used either to load initial modules, before "
-"the boot \n"
-"device is available, or to load a ramdisk image for an emergency boot "
-"situation.\n"
-"\n"
-"\n"
-"  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you "
-"should need\n"
-"to allocate a large ramdisk, this option can be used.\n"
-"\n"
-"\n"
-"  - Read-write: Normally the 'root' partition is initially brought up read-"
-"only, to allow\n"
-"a filesystem check before the system becomes 'live'.  You can override this "
-"option here.\n"
-"\n"
-"\n"
-"  - NoVideo: Should the Apple video hardware prove to be exceptionally "
-"problematic, you can\n"
-"select this option to boot in 'novideo' mode, with native framebuffer "
-"support.\n"
-"\n"
-"\n"
-"  - Default: Selects this entry as being the default Linux selection, "
-"selectable by just\n"
-"pressing ENTER at the yaboot prompt.  This entry will also be highlighted "
-"with a '*', if you\n"
-"press TAB to see the boot selections."
-msgstr ""
-
-#: ../../help.pm_.c:793
-msgid ""
-"SILO is a bootloader for SPARC: it is able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"You may also want not to give access to these other operating systems to\n"
-"anyone, in which case you can delete the corresponding entries. But\n"
-"in this case, you will need a boot disk in order to boot them!"
-msgstr ""
-
-#: ../../help.pm_.c:805
-msgid ""
-"SILO main options are:\n"
-"  - Bootloader installation: Indicate where you want to place the\n"
-"information required to boot to GNU/Linux. Unless you know exactly\n"
-"what you are doing, choose \"First sector of drive (MBR)\".\n"
-"\n"
-"\n"
-"  - Delay before booting default image: Specifies the number in tenths\n"
-"of a second the boot loader should wait before booting the first image.\n"
-"This is useful on systems that immediately boot from the hard disk after\n"
-"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-"omitted or is set to zero."
-msgstr ""
-
-#: ../../help.pm_.c:818
-msgid ""
-"Now it's time to configure the X Window System, which is the\n"
-"core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-"you must configure your video card and monitor. Most of these\n"
-"steps are automated, though, therefore your work may only consist\n"
-"of verifying what has been done and accept the settings :)\n"
-"\n"
-"\n"
-"When the configuration is over, X will be started (unless you\n"
-"ask DrakX not to) so that you can check and see if the\n"
-"settings suit you. If they don't, you can come back and\n"
-"change them, as many times as necessary."
-msgstr ""
-
-#: ../../help.pm_.c:831
-msgid ""
-"If something is wrong in X configuration, use these options to correctly\n"
-"configure the X Window System."
-msgstr ""
-
-#: ../../help.pm_.c:835
-msgid ""
-"If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n"
-"\"No\"."
-msgstr ""
-
-#: ../../help.pm_.c:839
-msgid ""
-"You can choose a security level for your system. Please refer to the manual "
-"for complete\n"
-"  information. Basically, if you don't know what to choose, keep the default "
-"option.\n"
-msgstr ""
-
-#: ../../help.pm_.c:844
-msgid ""
-"Your system is going to reboot.\n"
-"\n"
-"After rebooting, your new Linux Mandrake system will load automatically.\n"
-"If you want to boot into another existing operating system, please read\n"
-"the additional instructions."
-msgstr ""
-
-#: ../../install2.pm_.c:37
-msgid "Choose your language"
-msgstr ""
-
-#: ../../install2.pm_.c:38
-msgid "Select installation class"
-msgstr ""
-
-#: ../../install2.pm_.c:39
-msgid "Hard drive detection"
-msgstr ""
-
-#: ../../install2.pm_.c:40
-msgid "Configure mouse"
-msgstr ""
-
-#: ../../install2.pm_.c:41
-msgid "Choose your keyboard"
-msgstr ""
-
-#: ../../install2.pm_.c:42
-msgid "Security"
-msgstr ""
-
-#: ../../install2.pm_.c:43
-msgid "Setup filesystems"
-msgstr ""
-
-#: ../../install2.pm_.c:44
-msgid "Format partitions"
-msgstr ""
-
-#: ../../install2.pm_.c:45
-msgid "Choose packages to install"
-msgstr ""
-
-#: ../../install2.pm_.c:46
-msgid "Install system"
-msgstr ""
-
-#: ../../install2.pm_.c:47 ../../install_steps_interactive.pm_.c:894
-#: ../../install_steps_interactive.pm_.c:895
-msgid "Set root password"
-msgstr ""
-
-#: ../../install2.pm_.c:48
-msgid "Add a user"
-msgstr ""
-
-#: ../../install2.pm_.c:49
-msgid "Configure networking"
-msgstr ""
-
-#: ../../install2.pm_.c:51 ../../install_steps_interactive.pm_.c:818
-msgid "Summary"
-msgstr ""
-
-#: ../../install2.pm_.c:52
-msgid "Configure services"
-msgstr ""
-
-#: ../../install2.pm_.c:54
-msgid "Create a bootdisk"
-msgstr ""
-
-#: ../../install2.pm_.c:56
-msgid "Install bootloader"
-msgstr ""
-
-#: ../../install2.pm_.c:57
-msgid "Configure X"
-msgstr ""
-
-#: ../../install2.pm_.c:58
-msgid "Exit install"
-msgstr ""
-
-#: ../../install_any.pm_.c:402
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:433
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:676
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:680
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:690
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:712
-msgid "Error reading file $f"
-msgstr ""
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:310
-#: ../../interactive.pm_.c:99 ../../interactive.pm_.c:114
-#: ../../interactive.pm_.c:269 ../../interactive_newt.pm_.c:166
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:356
-#: ../../my_gtk.pm_.c:617 ../../my_gtk.pm_.c:640
-msgid "Ok"
-msgstr ""
-
-#: ../../install_gtk.pm_.c:423
-msgid "Please test the mouse"
-msgstr ""
-
-#: ../../install_gtk.pm_.c:424 ../../standalone/mousedrake_.c:132
-msgid "To activate the mouse,"
-msgstr ""
-
-#: ../../install_gtk.pm_.c:425 ../../standalone/mousedrake_.c:133
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:41
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:46 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:47 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:68
-msgid "Use free space"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:70
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:78
-#, fuzzy
-msgid "Use existing partition"
-msgstr "Yn fformatio rhaniad %s"
-
-#: ../../install_interactive.pm_.c:80
-#, fuzzy
-msgid "There is no existing partition to use"
-msgstr "Yn trio achub y tabl rhaniadau"
-
-#: ../../install_interactive.pm_.c:87
-msgid "Use the Windows partition for loopback"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:90
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Pa sector hoffech chi symud iddo?"
-
-#: ../../install_interactive.pm_.c:92
-#, fuzzy
-msgid "Choose the sizes"
-msgstr "Dewiswch y maint newydd"
-
-#: ../../install_interactive.pm_.c:93
-msgid "Root partition size in MB: "
-msgstr ""
-
-#: ../../install_interactive.pm_.c:94
-#, fuzzy
-msgid "Swap partition size in MB: "
-msgstr "Maint mewn MB: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:105
-#, fuzzy
-msgid "Which partition do you want to resize?"
-msgstr "Pa fath o rhaniad ydych chi eisiau?"
-
-#: ../../install_interactive.pm_.c:107
-msgid "Computing Windows filesystem bounds"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:110
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:113
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:114
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-
-#: ../../install_interactive.pm_.c:123
-#, fuzzy
-msgid "Which size do you want to keep for windows on"
-msgstr "Pa sector hoffech chi symud iddo?"
-
-#: ../../install_interactive.pm_.c:124
-#, fuzzy, c-format
-msgid "partition %s"
-msgstr "Ar ôl %s rhaniad %"
-
-#: ../../install_interactive.pm_.c:130
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:145
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:151
-msgid "Erase entire disk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:151
-msgid "Remove Windows(TM)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:154
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:157
-#, fuzzy, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "fe fydd yr holl wybodaeth ar y rhaniad yma yn cael ei ddileu"
-
-#: ../../install_interactive.pm_.c:165
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "Yn fformatio rhaniad %s"
-
-#: ../../install_interactive.pm_.c:169
-msgid "Use fdisk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:172
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:201
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Does gennych chi ddim rhaniadau!"
-
-#: ../../install_interactive.pm_.c:217
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Alla'i ddim ychwanegu unrhyw raniadau ychwanegol"
-
-#: ../../install_interactive.pm_.c:221
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy, c-format
-msgid "Partitioning failed: %s"
-msgstr "Sgrifennu y tabl rhaniadau"
-
-#: ../../install_interactive.pm_.c:232
-msgid "Bringing up the network"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:237
-msgid "Bringing down the network"
-msgstr ""
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-
-#: ../../install_steps.pm_.c:203
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr ""
-
-#: ../../install_steps.pm_.c:385
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-
-#: ../../install_steps.pm_.c:451
-#, c-format
-msgid "Welcome to %s"
-msgstr ""
-
-#: ../../install_steps.pm_.c:634
-msgid "No floppy drive available"
-msgstr ""
-
-#: ../../install_steps_auto_install.pm_.c:51
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:287
-#, fuzzy
-msgid "Choose the size you want to install"
-msgstr "Dewiswch weithred"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:437
-#, c-format
-msgid "Version: %s\n"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:438
-#, c-format
-msgid "Size: %d KB\n"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:337
-#: ../../install_steps_interactive.pm_.c:520
-msgid "Choose the packages you want to install"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:465 ../../install_steps_gtk.pm_.c:340
-msgid "Info"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:345
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:558
-#: ../../install_steps_interactive.pm_.c:675
-msgid "Installing"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:570
-msgid "Time remaining "
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:675
-msgid "Preparing installation"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:618
-#, c-format
-msgid "Installing package %s"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:695
-#: ../../install_steps_gtk.pm_.c:699
-msgid "Go on anyway?"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:695
-msgid "There was an error ordering packages:"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:142
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Linux-Mandrake. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:156
-msgid "Please, choose one of the following classes of installation:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:222
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:224
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:229
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:235
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:237
-#, fuzzy
-msgid "Percentage of packages to install"
-msgstr "Dewiswch weithred"
-
-#: ../../install_steps_gtk.pm_.c:285 ../../install_steps_interactive.pm_.c:599
-msgid "Package Group Selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:305 ../../install_steps_interactive.pm_.c:614
-msgid "Individual package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:349
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "Expand Tree"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "Collapse Tree"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:418
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "Bad package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:436
-#, c-format
-msgid "Name: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:439
-#, c-format
-msgid "Importance: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:448 ../../install_steps_interactive.pm_.c:578
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:471
-#, fuzzy
-msgid "The following packages are going to be installed"
-msgstr "Dewiswch weithred"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "The following packages are going to be removed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:482
-msgid "You can't select/unselect this package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:501
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:507
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:510
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:563
-#, fuzzy
-msgid "Estimating"
-msgstr "fformatio"
-
-#: ../../install_steps_gtk.pm_.c:582
-msgid "Please wait, preparing installation"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:613
-#, c-format
-msgid "%d packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:652
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:680 ../../install_steps_interactive.pm_.c:163
-msgid "Accept"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:680 ../../install_steps_interactive.pm_.c:163
-#, fuzzy
-msgid "Refuse"
-msgstr "Newid maint"
-
-#: ../../install_steps_gtk.pm_.c:681
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:699
-msgid "There was an error installing packages:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:37
-#, fuzzy
-msgid "An error occurred"
-msgstr "Fe gafwyd gwall:"
-
-#: ../../install_steps_interactive.pm_.c:55
-msgid "Please, choose a language to use."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:56
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:68
-#: ../../install_steps_interactive.pm_.c:613
-msgid "All"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:86
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:87
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Linux-"
-"Mandrake distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Linux-Mandrake distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Linux-Mandrake sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:182
-#: ../../install_steps_interactive.pm_.c:822
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:183
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:184
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:201
-msgid "Install Class"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:201
-#, fuzzy
-msgid "Which installation class do you want?"
-msgstr "Pa fath o rhaniad ydych chi eisiau?"
-
-#: ../../install_steps_interactive.pm_.c:203
-msgid "Install/Update"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:203
-msgid "Is this an install or an update?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Recommended"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:215
-#: ../../install_steps_interactive.pm_.c:218
-#, fuzzy
-msgid "Expert"
-msgstr "Ext2"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Update"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:238 ../../standalone/mousedrake_.c:41
-msgid "Please, choose the type of your mouse."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:244 ../../standalone/mousedrake_.c:57
-msgid "Mouse Port"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:245 ../../standalone/mousedrake_.c:58
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:253
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:255
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:256
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:275
-msgid "Configuring PCMCIA cards..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:275
-msgid "PCMCIA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:280
-#, fuzzy
-msgid "Configuring IDE"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../install_steps_interactive.pm_.c:280
-msgid "IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:295
-#, fuzzy
-msgid "no available partitions"
-msgstr "Yn fformatio rhaniad %s"
-
-#: ../../install_steps_interactive.pm_.c:298
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:306
-#, fuzzy
-msgid "Choose the mount points"
-msgstr "Dewiswch weithred"
-
-#: ../../install_steps_interactive.pm_.c:323
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:336
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:361
-#, fuzzy
-msgid "Root Partition"
-msgstr "Yn fformatio rhaniad %s"
-
-#: ../../install_steps_interactive.pm_.c:362
-#, fuzzy
-msgid "What is the root partition (/) of your system?"
-msgstr "Pa fath o rhaniad ydych chi eisiau?"
-
-#: ../../install_steps_interactive.pm_.c:376
-#, fuzzy
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Mi fydd angen i chi ail-fwtio cyn i'r newidiadau gymeryd lle"
-
-#: ../../install_steps_interactive.pm_.c:403
-#, fuzzy
-msgid "Choose the partitions you want to format"
-msgstr "Dewiswch weithred"
-
-#: ../../install_steps_interactive.pm_.c:404
-msgid "Check bad blocks?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:427
-#, fuzzy
-msgid "Formatting partitions"
-msgstr "Yn fformatio rhaniad %s"
-
-#: ../../install_steps_interactive.pm_.c:429
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:432
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:438
-#, fuzzy
-msgid "Looking for available packages"
-msgstr "Yn fformatio rhaniad %s"
-
-#: ../../install_steps_interactive.pm_.c:444
-msgid "Finding packages to upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:461
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:480
-#, c-format
-msgid "Complete (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:480
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:480
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:486
-#, fuzzy
-msgid "Custom"
-msgstr "Wedi fformatio\n"
-
-#: ../../install_steps_interactive.pm_.c:585
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:650
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:655
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:684
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:693
-#, fuzzy
-msgid "Post-install configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../install_steps_interactive.pm_.c:718
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid "Choose a mirror from which to get the packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:761
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:764
-#, fuzzy
-msgid "Please choose the packages you want to install."
-msgstr "Dewiswch weithred"
-
-#: ../../install_steps_interactive.pm_.c:776
-#, fuzzy
-msgid "Which is your timezone?"
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../install_steps_interactive.pm_.c:778
-msgid "Is your hardware clock set to GMT?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:806 ../../printer.pm_.c:22
-#: ../../printerdrake.pm_.c:415
-msgid "Remote CUPS server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:807
-msgid "No printer"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:821
-#, fuzzy
-msgid "Mouse"
-msgstr "Symud"
-
-#: ../../install_steps_interactive.pm_.c:823
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:824 ../../printerdrake.pm_.c:344
-msgid "Printer"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:826
-msgid "ISDN card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:829
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:832
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:862
-#, fuzzy
-msgid "Which printing system do you want to use?"
-msgstr "Pa fath o rhaniad ydych chi eisiau?"
-
-#: ../../install_steps_interactive.pm_.c:896
-msgid "No password"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:901
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:907
-msgid "Use NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:907
-msgid "yellow pages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:914
-msgid "Authentification NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:915
-msgid "NIS Domain"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:916
-#, fuzzy
-msgid "NIS Server"
-msgstr "Gweinydd X"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:967
-#, fuzzy
-msgid "First floppy drive"
-msgstr "Fformatio i gyd"
-
-#: ../../install_steps_interactive.pm_.c:968
-#, fuzzy
-msgid "Second floppy drive"
-msgstr "Arbed ar flopi"
-
-#: ../../install_steps_interactive.pm_.c:969
-msgid "Skip"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:974
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:983
-msgid "Sorry, no floppy drive available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:987
-#, fuzzy
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Dewiswch weithred"
-
-#: ../../install_steps_interactive.pm_.c:991
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid "Creating bootdisk"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1001
-msgid "Preparing bootloader"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1010
-#, fuzzy
-msgid "Do you want to use aboot?"
-msgstr "Beth ydych eisiau wneud?"
-
-#: ../../install_steps_interactive.pm_.c:1013
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1038 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1039 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1040 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1044 ../../standalone/draksec_.c:49
-msgid "Choose security level"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1080
-msgid "Do you want to generate an auto install floppy for linux replication?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1082
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "Creating auto install floppy"
-msgstr "Arbed ar flopi"
-
-#: ../../install_steps_interactive.pm_.c:1156
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1167
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Linux-"
-"Mandrake,\n"
-"consult the Errata available from http://www.linux-mandrake.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Linux-Mandrake User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1179
-#, fuzzy
-msgid "Generate auto install floppy"
-msgstr "Arbed ar flopi"
-
-#: ../../install_steps_interactive.pm_.c:1181
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1186
-#, fuzzy
-msgid "Automated"
-msgstr "Wedi fformatio\n"
-
-#: ../../install_steps_interactive.pm_.c:1186
-#, fuzzy
-msgid "Replay"
-msgstr "Ail-lwytho"
-
-#: ../../install_steps_interactive.pm_.c:1189
-msgid "Save packages selection"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Linux-Mandrake Installation %s"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:33
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-
-#: ../../interactive.pm_.c:65
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:267
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:290
-msgid "Please wait"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr ""
-
-#: ../../keyboard.pm_.c:124 ../../keyboard.pm_.c:155
-msgid "Czech (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:125 ../../keyboard.pm_.c:138 ../../keyboard.pm_.c:158
-msgid "German"
-msgstr ""
-
-#: ../../keyboard.pm_.c:126
-msgid "Dvorak"
-msgstr ""
-
-#: ../../keyboard.pm_.c:127 ../../keyboard.pm_.c:164
-msgid "Spanish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:128 ../../keyboard.pm_.c:165
-msgid "Finnish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:129 ../../keyboard.pm_.c:139 ../../keyboard.pm_.c:166
-msgid "French"
-msgstr ""
-
-#: ../../keyboard.pm_.c:130 ../../keyboard.pm_.c:187
-msgid "Norwegian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:131
-msgid "Polish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:132 ../../keyboard.pm_.c:192
-msgid "Russian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:133 ../../keyboard.pm_.c:203
-msgid "UK keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:134 ../../keyboard.pm_.c:137 ../../keyboard.pm_.c:204
-msgid "US keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:141
-msgid "Armenian (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:142
-msgid "Armenian (typewriter)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:143
-msgid "Armenian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:147
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:148
-msgid "Azerbaidjani (cyrillic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:149
-msgid "Belgian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:150
-msgid "Bulgarian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:151
-msgid "Brazilian (ABNT-2)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:152
-msgid "Belarusian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:153
-msgid "Swiss (German layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:154
-msgid "Swiss (French layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:156
-msgid "Czech (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:157
-msgid "Czech (Programmers)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:159
-msgid "German (no dead keys)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:160
-msgid "Danish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:161
-msgid "Dvorak (US)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:162
-msgid "Dvorak (Norwegian)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:163
-msgid "Estonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:167
-msgid "Georgian (\"Russian\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:168
-msgid "Georgian (\"Latin\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:169
-msgid "Greek"
-msgstr ""
-
-#: ../../keyboard.pm_.c:170
-msgid "Hungarian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:171
-msgid "Croatian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:172
-msgid "Israeli"
-msgstr ""
-
-#: ../../keyboard.pm_.c:173
-msgid "Israeli (Phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174
-msgid "Iranian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:175
-msgid "Icelandic"
-msgstr ""
-
-#: ../../keyboard.pm_.c:176
-msgid "Italian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:177
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:178
-msgid "Korean keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:179
-msgid "Latin American"
-msgstr ""
-
-#: ../../keyboard.pm_.c:180
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:181
-msgid "Dutch"
-msgstr ""
-
-#: ../../keyboard.pm_.c:182
-msgid "Lithuanian AZERTY (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:184
-msgid "Lithuanian AZERTY (new)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:185
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:186
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:188
-msgid "Polish (qwerty layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:189
-msgid "Polish (qwertz layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:190
-msgid "Portuguese"
-msgstr ""
-
-#: ../../keyboard.pm_.c:191
-msgid "Canadian (Quebec)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:193
-msgid "Russian (Yawerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:194
-msgid "Swedish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:195
-msgid "Slovenian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:196
-msgid "Slovakian (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:197
-msgid "Slovakian (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198
-msgid "Slovakian (Programmers)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:199
-msgid "Thai keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:200
-msgid "Turkish (traditional \"F\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:201
-msgid "Turkish (modern \"Q\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:202
-msgid "Ukrainian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:205
-msgid "US keyboard (international)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:206
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:207
-msgid "Yugoslavian (latin/cyrillic)"
-msgstr ""
-
-#: ../../lvm.pm_.c:70
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr ""
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr ""
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr ""
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr ""
-
-#: ../../mouse.pm_.c:45
-#, fuzzy
-msgid "Wheel"
-msgstr "lefel"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr ""
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr ""
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr ""
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr ""
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr ""
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr ""
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:72
-#, fuzzy
-msgid "none"
-msgstr "Wedi ei wneud"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:356
-msgid "Finish"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:356
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:357
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:617
-msgid "Is this correct?"
-msgstr "Ydi hyn yn gywir?"
-
-#: ../../netconnect.pm_.c:143
-#, fuzzy
-msgid "Internet configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../netconnect.pm_.c:144
-#, fuzzy
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../netconnect.pm_.c:148
-msgid "Testing your connection..."
-msgstr ""
-
-#: ../../netconnect.pm_.c:154 ../../standalone/draknet_.c:196
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../netconnect.pm_.c:155
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../netconnect.pm_.c:156 ../../standalone/draknet_.c:196
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-
-#: ../../netconnect.pm_.c:161 ../../netconnect.pm_.c:904
-#: ../../netconnect.pm_.c:934 ../../netconnect.pm_.c:1012
-#, fuzzy
-msgid "Network Configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../netconnect.pm_.c:222 ../../netconnect.pm_.c:266
-#: ../../netconnect.pm_.c:276 ../../netconnect.pm_.c:283
-#: ../../netconnect.pm_.c:293
-#, fuzzy
-msgid "ISDN Configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../netconnect.pm_.c:222
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../netconnect.pm_.c:236
-#, fuzzy
-msgid "Connection Configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../netconnect.pm_.c:237
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../netconnect.pm_.c:239 ../../standalone/draknet_.c:552
-msgid "Card IRQ"
-msgstr ""
-
-#: ../../netconnect.pm_.c:240 ../../standalone/draknet_.c:553
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:241 ../../standalone/draknet_.c:554
-msgid "Card IO"
-msgstr ""
-
-#: ../../netconnect.pm_.c:242 ../../standalone/draknet_.c:555
-msgid "Card IO_0"
-msgstr ""
-
-#: ../../netconnect.pm_.c:243 ../../standalone/draknet_.c:556
-msgid "Card IO_1"
-msgstr ""
-
-#: ../../netconnect.pm_.c:244 ../../standalone/draknet_.c:557
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../netconnect.pm_.c:245 ../../standalone/draknet_.c:558
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:246 ../../standalone/draknet_.c:559
-msgid "Provider phone number"
-msgstr ""
-
-#: ../../netconnect.pm_.c:247
-msgid "Provider dns 1"
-msgstr ""
-
-#: ../../netconnect.pm_.c:248
-msgid "Provider dns 2"
-msgstr ""
-
-#: ../../netconnect.pm_.c:249 ../../standalone/draknet_.c:564
-msgid "Dialing mode"
-msgstr ""
-
-#: ../../netconnect.pm_.c:250 ../../standalone/draknet_.c:562
-msgid "Account Login (user name)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:251 ../../standalone/draknet_.c:563
-msgid "Account Password"
-msgstr ""
-
-#: ../../netconnect.pm_.c:261
-msgid "Europe"
-msgstr ""
-
-#: ../../netconnect.pm_.c:261
-msgid "Europe (EDSS1)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:263
-msgid "Rest of the world"
-msgstr ""
-
-#: ../../netconnect.pm_.c:263
-msgid ""
-"Rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:267
-#, fuzzy
-msgid "Which protocol do you want to use ?"
-msgstr "Pa fath o rhaniad ydych chi eisiau?"
-
-#: ../../netconnect.pm_.c:277
-msgid "What kind of card do you have?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:278
-msgid "I don't know"
-msgstr ""
-
-#: ../../netconnect.pm_.c:278
-msgid "ISA / PCMCIA"
-msgstr ""
-
-#: ../../netconnect.pm_.c:278
-msgid "PCI"
-msgstr ""
-
-#: ../../netconnect.pm_.c:284
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:288
-msgid "Abort"
-msgstr ""
-
-#: ../../netconnect.pm_.c:288
-msgid "Continue"
-msgstr ""
-
-#: ../../netconnect.pm_.c:294
-msgid "Which is your ISDN card ?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:314
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../netconnect.pm_.c:323
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../netconnect.pm_.c:371
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../netconnect.pm_.c:375 ../../standalone/drakgw_.c:232
-#, fuzzy
-msgid "Choose the network interface"
-msgstr "Dewiswch y maint newydd"
-
-#: ../../netconnect.pm_.c:376
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-
-#: ../../netconnect.pm_.c:385 ../../netconnect.pm_.c:700
-#: ../../netconnect.pm_.c:845 ../../standalone/drakgw_.c:223
-msgid "Network interface"
-msgstr ""
-
-#: ../../netconnect.pm_.c:386
-msgid ""
-"\n"
-"Do you agree?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:386
-#, fuzzy
-msgid "I'm about to restart the network device:\n"
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../netconnect.pm_.c:484
-#, fuzzy
-msgid "ADSL configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../netconnect.pm_.c:485
-#, fuzzy
-msgid "Do you want to start your connection at boot?"
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../netconnect.pm_.c:620
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-
-#: ../../netconnect.pm_.c:625
-msgid "Dialup options"
-msgstr ""
-
-#: ../../netconnect.pm_.c:626 ../../standalone/draknet_.c:566
-#, fuzzy
-msgid "Connection name"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../netconnect.pm_.c:627 ../../standalone/draknet_.c:567
-msgid "Phone number"
-msgstr ""
-
-#: ../../netconnect.pm_.c:628 ../../standalone/draknet_.c:568
-#, fuzzy
-msgid "Login ID"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Authentication"
-msgstr ""
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "PAP"
-msgstr ""
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Script-based"
-msgstr ""
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Terminal-based"
-msgstr ""
-
-#: ../../netconnect.pm_.c:631 ../../standalone/draknet_.c:571
-msgid "Domain name"
-msgstr ""
-
-#: ../../netconnect.pm_.c:632 ../../standalone/draknet_.c:572
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Gweinydd X"
-
-#: ../../netconnect.pm_.c:633 ../../standalone/draknet_.c:573
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Arbed ar flopi"
-
-#: ../../netconnect.pm_.c:701
-msgid ""
-"I'm about to restart the network device $netc->{NET_DEVICE}. Do you agree?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:745
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../netconnect.pm_.c:745 ../../netconnect.pm_.c:748
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-
-#: ../../netconnect.pm_.c:745
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../netconnect.pm_.c:748
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-
-#: ../../netconnect.pm_.c:748
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../netconnect.pm_.c:752 ../../standalone/net_monitor_.c:81
-#, fuzzy
-msgid "Connect to Internet"
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../netconnect.pm_.c:754
-#, fuzzy
-msgid "Disconnect from Internet"
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../netconnect.pm_.c:756
-#, fuzzy
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../netconnect.pm_.c:759
-#, fuzzy
-msgid "Internet connection & configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../netconnect.pm_.c:811 ../../netconnect.pm_.c:961
-#: ../../netconnect.pm_.c:971 ../../netconnect.pm_.c:986
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../netconnect.pm_.c:812
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "Ext2"
-
-#: ../../netconnect.pm_.c:812
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../netconnect.pm_.c:812
-msgid "What kind is your ISDN connection?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:833 ../../netconnect.pm_.c:882
-#, fuzzy
-msgid "Connect to the Internet"
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../netconnect.pm_.c:834
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../netconnect.pm_.c:836
-msgid "use dhcp"
-msgstr ""
-
-#: ../../netconnect.pm_.c:836
-msgid "use pppoe"
-msgstr ""
-
-#: ../../netconnect.pm_.c:836
-msgid "use pptp"
-msgstr ""
-
-#: ../../netconnect.pm_.c:846
-#, fuzzy, c-format
-msgid "I'm about to restart the network device %s. Do you agree?"
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../netconnect.pm_.c:883
-#, fuzzy
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "Pa fath o rhaniad ydych chi eisiau?"
-
-#: ../../netconnect.pm_.c:900
-#, fuzzy
-msgid "Network configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../netconnect.pm_.c:901
-#, fuzzy
-msgid "Do you want to restart the network"
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../netconnect.pm_.c:904
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../netconnect.pm_.c:935
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:962
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:964
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Dewiswch y maint newydd"
-
-#: ../../netconnect.pm_.c:965
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../netconnect.pm_.c:971 ../../printerdrake.pm_.c:19
-msgid "Detecting devices..."
-msgstr ""
-
-#: ../../netconnect.pm_.c:978
-msgid "Normal modem connection"
-msgstr ""
-
-#: ../../netconnect.pm_.c:978
-#, c-format
-msgid "detected on port %s"
-msgstr ""
-
-#: ../../netconnect.pm_.c:979
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../netconnect.pm_.c:979
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../netconnect.pm_.c:980
-msgid "DSL (or ADSL) connection"
-msgstr ""
-
-#: ../../netconnect.pm_.c:980
-#, c-format
-msgid "detected on interface %s"
-msgstr ""
-
-#: ../../netconnect.pm_.c:981
-#, fuzzy
-msgid "Cable connection"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../netconnect.pm_.c:982
-#, fuzzy
-msgid "LAN connection"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../netconnect.pm_.c:982
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../netconnect.pm_.c:987
-#, fuzzy
-msgid "How do you want to connect to the Internet?"
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../netconnect.pm_.c:1004
-msgid ""
-"Congratulation, The network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system."
-msgstr ""
-
-#: ../../netconnect.pm_.c:1007
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-
-#: ../../network.pm_.c:253
-msgid "no network card found"
-msgstr ""
-
-#: ../../network.pm_.c:277 ../../network.pm_.c:387
-msgid "Configuring network"
-msgstr ""
-
-#: ../../network.pm_.c:278
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-
-#: ../../network.pm_.c:282 ../../network.pm_.c:392
-msgid "Host name"
-msgstr ""
-
-#: ../../network.pm_.c:319
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network.pm_.c:324
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-
-#: ../../network.pm_.c:333 ../../network.pm_.c:334
-#, c-format
-msgid "Configuring network device %s"
-msgstr ""
-
-#: ../../network.pm_.c:334
-msgid " (driver $module)"
-msgstr ""
-
-#: ../../network.pm_.c:336 ../../standalone/draknet_.c:231
-#: ../../standalone/draknet_.c:427
-msgid "IP address"
-msgstr ""
-
-#: ../../network.pm_.c:337 ../../standalone/draknet_.c:428
-msgid "Netmask"
-msgstr ""
-
-#: ../../network.pm_.c:338
-msgid "(bootp/dhcp)"
-msgstr ""
-
-#: ../../network.pm_.c:338
-#, fuzzy
-msgid "Automatic IP"
-msgstr "Wedi fformatio\n"
-
-#: ../../network.pm_.c:359 ../../printerdrake.pm_.c:102
-#: ../../printerdrake.pm_.c:425
-msgid "IP address should be in format 1.2.3.4"
-msgstr ""
-
-#: ../../network.pm_.c:388
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-
-#: ../../network.pm_.c:393
-#, fuzzy
-msgid "DNS server"
-msgstr "Gweinydd X"
-
-#: ../../network.pm_.c:394 ../../standalone/draknet_.c:565
-msgid "Gateway"
-msgstr ""
-
-#: ../../network.pm_.c:396
-#, fuzzy
-msgid "Gateway device"
-msgstr "dyfais"
-
-#: ../../network.pm_.c:407
-#, fuzzy
-msgid "Proxies configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../network.pm_.c:408
-msgid "HTTP proxy"
-msgstr ""
-
-#: ../../network.pm_.c:409
-msgid "FTP proxy"
-msgstr ""
-
-#: ../../network.pm_.c:412
-msgid "Proxy should be http://..."
-msgstr ""
-
-#: ../../network.pm_.c:413
-msgid "Proxy should be ftp://..."
-msgstr ""
-
-#: ../../partition_table.pm_.c:563
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:581
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-
-#: ../../partition_table.pm_.c:675
-#, c-format
-msgid "Error reading file %s"
-msgstr ""
-
-#: ../../partition_table.pm_.c:682
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr ""
-
-#: ../../partition_table.pm_.c:684
-msgid "Bad backup file"
-msgstr ""
-
-#: ../../partition_table.pm_.c:706
-#, c-format
-msgid "Error writing to file %s"
-msgstr ""
-
-#: ../../partition_table_raw.pm_.c:161
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr ""
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr ""
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr ""
-
-#: ../../printer.pm_.c:20
-msgid "Local printer"
-msgstr ""
-
-#: ../../printer.pm_.c:21
-msgid "Remote printer"
-msgstr ""
-
-#: ../../printer.pm_.c:23
-msgid "Remote lpd server"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "Network printer (socket)"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "SMB/Windows 95/98/NT"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "NetWare"
-msgstr ""
-
-#: ../../printer.pm_.c:27 ../../printerdrake.pm_.c:158
-#: ../../printerdrake.pm_.c:160
-msgid "Printer Device URI"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:19
-msgid "Test ports"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:40
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:52
-msgid "Local Printer Device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:53
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:55
-msgid "Printer Device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:74
-msgid "Remote lpd Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:75
-msgid ""
-"To use a remote lpd print queue, you need to supply\n"
-"the hostname of the printer server and the queue name\n"
-"on that server which jobs should be placed in."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:78
-msgid "Remote hostname"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:79
-msgid "Remote queue"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:88
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:89
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:94
-msgid "SMB server host"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:95
-msgid "SMB server IP"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:96
-msgid "Share name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:99
-msgid "Workgroup"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124
-msgid "NetWare Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:125
-msgid ""
-"To print to a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:129
-msgid "Printer Server"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:130
-msgid "Print Queue Name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:142
-msgid "Socket Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:143
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"hostname of the printer and optionally the port number."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:145
-msgid "Printer Hostname"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:146 ../../printerdrake.pm_.c:422
-#, fuzzy
-msgid "Port"
-msgstr "Fformatio"
-
-#: ../../printerdrake.pm_.c:159
-msgid "You can specify directly the URI to access the printer with CUPS."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:192 ../../printerdrake.pm_.c:244
-msgid "What type of printer do you have?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:204 ../../printerdrake.pm_.c:305
-msgid "Do you want to test printing?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:207 ../../printerdrake.pm_.c:316
-msgid "Printing test page(s)..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:214 ../../printerdrake.pm_.c:324
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer daemon.\n"
-"This may take a little time before printer start.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-"Does it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:218 ../../printerdrake.pm_.c:328
-msgid ""
-"Test page(s) have been sent to the printer daemon.\n"
-"This may take a little time before printer start.\n"
-"Does it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:234
-msgid "Yes, print ASCII test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:235
-msgid "Yes, print PostScript test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:236
-msgid "Yes, print both test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:243
-msgid "Configure Printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:273
-msgid "Printer options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:274
-msgid "Paper Size"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:275
-msgid "Eject page after job?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:280
-msgid "Uniprint driver options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:281
-msgid "Color depth options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:283
-msgid "Print text as PostScript?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:285
-msgid "Fix stair-stepping text?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:287
-msgid "Number of pages per output pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:288
-msgid "Right/Left margins in points (1/72 of inch)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:289
-msgid "Top/Bottom margins in points (1/72 of inch)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:291
-msgid "Extra GhostScript options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:293
-msgid "Extra Text options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:295
-msgid "Reverse page order"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:345
-msgid "Would you like to configure a printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:351
-msgid ""
-"Here are the following print queues.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:370
-#, fuzzy
-msgid "CUPS starting"
-msgstr "fformatio"
-
-#: ../../printerdrake.pm_.c:370
-msgid "Reading CUPS drivers database..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:384 ../../printerdrake.pm_.c:450
-#: ../../printerdrake.pm_.c:471 ../../printerdrake.pm_.c:479
-msgid "Select Printer Connection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:385 ../../printerdrake.pm_.c:472
-msgid "How is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:392
-msgid "Select Remote Printer Connection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"With a remote CUPS server, you do not have to configure\n"
-"any printer here; printers will be automatically detected.\n"
-"In case of doubt, select \"Remote CUPS server\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-"With a remote CUPS server, you do not have to configure\n"
-"any printer here; printers will be automatically detected\n"
-"unless you have a server on a different network; in the\n"
-"latter case, you have to give the CUPS server IP address\n"
-"and optionally the port number."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "Gweinydd X"
-
-#: ../../printerdrake.pm_.c:429
-msgid "Port number should be numeric"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:451 ../../printerdrake.pm_.c:480
-msgid "Remove queue"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:454
-msgid ""
-"Name of printer should contains only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:461
-msgid ""
-"Every printer need a name (for example lp).\n"
-"Other parameters such as the description of the printer or its location\n"
-"can be defined. What name should be used for this printer and\n"
-"how is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:465
-msgid "Name of printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:466
-msgid "Description"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:467
-msgid "Location"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-msgid ""
-"Every print queue (which print jobs are directed to) needs a\n"
-"name (often lp) and a spool directory associated with it. What\n"
-"name and directory should be used for this queue and how is the printer "
-"connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:489
-msgid "Name of queue"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:490
-msgid "Spool directory"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:491
-msgid "Printer Connection"
-msgstr ""
-
-#: ../../raid.pm_.c:33
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-
-#: ../../raid.pm_.c:103
-msgid "Can't write file $file"
-msgstr ""
-
-#: ../../raid.pm_.c:128
-msgid "mkraid failed"
-msgstr ""
-
-#: ../../raid.pm_.c:128
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr ""
-
-#: ../../raid.pm_.c:144
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:17
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-
-#: ../../services.pm_.c:18
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: ../../services.pm_.c:20
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:22
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: ../../services.pm_.c:25
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: ../../services.pm_.c:28
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:30
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-
-#: ../../services.pm_.c:32
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: ../../services.pm_.c:36
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:44
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:46
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: ../../services.pm_.c:48
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:52
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:54
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:56
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:61
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:64
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:67
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:70
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-
-#: ../../services.pm_.c:72
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:74
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:79
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:83
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:85
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:86
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:88
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:89
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-
-#: ../../services.pm_.c:118
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "running"
-msgstr "Rhybudd"
-
-#: ../../services.pm_.c:137
-msgid "stopped"
-msgstr ""
-
-#: ../../services.pm_.c:151
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:156
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:163
-msgid "On boot"
-msgstr ""
-
-#: ../../standalone/diskdrake_.c:67
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:37 ../../standalone/drakgw_.c:180
-msgid "Internet Connection Sharing"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:118
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:119
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:123
-msgid "disable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148
-#, fuzzy
-msgid "reconfigure"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/drakgw_.c:126
-msgid "Disabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:134
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/drakgw_.c:143
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:144
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:148
-msgid "enable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:155
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:160
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/drakgw_.c:168
-msgid "Config file content could not be interpreted."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-msgid "Unrecognized config file"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:181
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:207
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:208
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/drakgw_.c:216
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:217
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:224
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:233
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:242
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid "Potential LAN address conflict found in current config of $_!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:261 ../../standalone/drakgw_.c:267
-#, fuzzy
-msgid "Firewalling configuration detected!"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:276
-#, fuzzy
-msgid "Configuring..."
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:307
-msgid "Problems installing package $_"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:590
-msgid "Congratulations!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:591
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:608
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:609
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:610
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/drakgw_.c:615
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/drakgw_.c:622
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:59
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/draknet_.c:66 ../../standalone/draknet_.c:539
-msgid "Profile: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:74
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:108
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:114
-msgid "Name of the profile to create:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:140
-msgid "Hostname: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:147
-#, fuzzy
-msgid "Internet access"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/draknet_.c:160
-#, fuzzy
-msgid "Type:"
-msgstr "Math: "
-
-#: ../../standalone/draknet_.c:163 ../../standalone/draknet_.c:354
-#, fuzzy
-msgid "Gateway:"
-msgstr "dyfais"
-
-#: ../../standalone/draknet_.c:163 ../../standalone/draknet_.c:354
-msgid "Interface:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:168
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:170 ../../standalone/draknet_.c:357
-#: ../../standalone/net_monitor_.c:122 ../../standalone/net_monitor_.c:224
-#, fuzzy
-msgid "Connected"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/draknet_.c:170 ../../standalone/draknet_.c:357
-#: ../../standalone/net_monitor_.c:83 ../../standalone/net_monitor_.c:122
-#: ../../standalone/net_monitor_.c:224
-#, fuzzy
-msgid "Not connected"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/draknet_.c:173 ../../standalone/draknet_.c:358
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:173 ../../standalone/draknet_.c:358
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:191
-#, fuzzy
-msgid "Starting your connection..."
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/draknet_.c:199
-#, fuzzy
-msgid "Closing your connection..."
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/draknet_.c:204
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-
-#: ../../standalone/draknet_.c:207
-#, fuzzy
-msgid "The system is now disconnected."
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../standalone/draknet_.c:219
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/draknet_.c:226 ../../standalone/draknet_.c:411
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/draknet_.c:231
-msgid "Adapter"
-msgstr ""
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "Driver"
-msgstr "Gweinydd X"
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "Interface"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/draknet_.c:231
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:250
-msgid "Configure Local Area Network..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:283
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Fformatio"
-
-#: ../../standalone/draknet_.c:288
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:307
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/draknet_.c:391
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:415
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/draknet_.c:423
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:429
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:430
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:466 ../../standalone/draknet_.c:470
-msgid "Disable"
-msgstr ""
-
-#: ../../standalone/draknet_.c:466 ../../standalone/draknet_.c:470
-msgid "Enable"
-msgstr ""
-
-#: ../../standalone/draknet_.c:504
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:528
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/draknet_.c:532
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/draknet_.c:541
-#, fuzzy
-msgid "Connection type: "
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/draknet_.c:547
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid "Provider dns 1 (optional)"
-msgstr ""
-
-#: ../../standalone/draknet_.c:561
-msgid "Provider dns 2 (optional)"
-msgstr ""
-
-#: ../../standalone/draknet_.c:574
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:575
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr ""
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr ""
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr ""
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-
-#: ../../standalone/draksec_.c:52
-msgid "Setting security level"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:44
-#, fuzzy
-msgid "Control Center"
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../standalone/drakxconf_.c:45
-msgid "Choose the tool you want to use"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:50
-msgid "no serial_usb found\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:54
-msgid "Emulate third button?"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:131
-msgid "Test the mouse here."
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:40 ../../standalone/net_monitor_.c:52
-#, fuzzy
-msgid "Network Monitoring"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/net_monitor_.c:56
-msgid "Statistics"
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:59
-msgid "Sending Speed: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:61
-msgid "Receiving Speed: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:66
-#, fuzzy
-msgid "Close"
-msgstr "Symud"
-
-#: ../../standalone/net_monitor_.c:100 ../../standalone/net_monitor_.c:104
-#, fuzzy
-msgid "Connecting to Internet "
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../standalone/net_monitor_.c:100 ../../standalone/net_monitor_.c:104
-#, fuzzy
-msgid "Disconnecting from Internet "
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../standalone/net_monitor_.c:114
-#, fuzzy
-msgid "Disconnection from Internet failed."
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../standalone/net_monitor_.c:115
-#, fuzzy
-msgid "Disconnection from Internet complete."
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../standalone/net_monitor_.c:117
-#, fuzzy
-msgid "Connection complete."
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/net_monitor_.c:118
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:188
-msgid "sent: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:191
-msgid "received: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:222
-#, fuzzy
-msgid "Connect"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/net_monitor_.c:222
-#, fuzzy
-msgid "Disconnect"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/tinyfirewall_.c:29
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/tinyfirewall_.c:42
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:10
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Linux Mandrake machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:15
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:22
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:27
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:32
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:37
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:42
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:47
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:52
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:57
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:62
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:67
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:83
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:85
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "Dogfennau"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Graphics"
-msgstr "Aml-gyfrwng"
-
-#: ../../share/compssUsers:999
-msgid "Internet"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Swyddfa"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Aml-gyfrwng"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dogfennau"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Sound"
-msgstr "Aml-gyfrwng"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Video"
-msgstr "Aml-gyfrwng"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - CD Burning"
-msgstr "Aml-gyfrwng"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "Gweinydd X"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "Dogfennau"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Dogfennau"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#, fuzzy
-#~ msgid "%d seconds"
-#~ msgstr "Gadael mewn %d eiliad"
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "Yn parataoi cyfluniad X-Window"
-
-#, fuzzy
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "Yn parataoi cyfluniad X-Window"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Dewiswch ffeil"
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Yn parataoi cyfluniad X-Window"
-
-#, fuzzy
-#~ msgid "Boot style configuration"
-#~ msgstr "Yn parataoi cyfluniad X-Window"
-
-#, fuzzy
-#~ msgid "Create a boot floppy"
-#~ msgstr "Arbed ar flopi"
-
-#, fuzzy
-#~ msgid "Format floppy"
-#~ msgstr "Fformatio i gyd"
-
-#, fuzzy
-#~ msgid "gMonitor"
-#~ msgstr "Monitor"
-
-#, fuzzy
-#~ msgid "Internet/Network access"
-#~ msgstr "Yn parataoi cyfluniad X-Window"
-
-#, fuzzy
-#~ msgid "Mail information"
-#~ msgstr "Dangos gwybodaeth"
-
-#, fuzzy
-#~ msgid "Firewall Configuration Wizard"
-#~ msgstr "Yn parataoi cyfluniad X-Window"
-
-#, fuzzy
-#~ msgid "First DNS Server"
-#~ msgstr "Gweinydd X"
-
-#, fuzzy
-#~ msgid "Second DNS Server"
-#~ msgstr "Arbed ar flopi"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "Wedi ei wneud"
-
-#, fuzzy
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Pa sector hoffech chi symud iddo?"
-
-#, fuzzy
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Yn parataoi cyfluniad X-Window"
-
-#, fuzzy
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Yn parataoi cyfluniad X-Window"
-
-#~ msgid "Multimedia"
-#~ msgstr "Aml-gyfrwng"
-
-#, fuzzy
-#~ msgid "Gnome"
-#~ msgstr "Wedi ei wneud"
-
-#, fuzzy
-#~ msgid "Internet Tools"
-#~ msgstr "Yn parataoi cyfluniad X-Window"
-
-#, fuzzy
-#~ msgid "Enable num lock at startup"
-#~ msgstr "X wrth ddechrau"
-
-#, fuzzy
-#~ msgid "What is your system used for?"
-#~ msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#, fuzzy
-#~ msgid "Select the size you want to install"
-#~ msgstr "Dewiswch weithred"
-
-#, fuzzy
-#~ msgid "Customized"
-#~ msgstr "Wedi fformatio\n"
-
-#, fuzzy
-#~ msgid "Remove"
-#~ msgstr "Symud"
-
-#, fuzzy
-#~ msgid "Choose package to install"
-#~ msgstr "Dewiswch weithred"
-
-#, fuzzy
-#~ msgid "ECI modem"
-#~ msgstr "Ext2"
-
-#, fuzzy
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#, fuzzy
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#, fuzzy
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#, fuzzy
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#, fuzzy
-#~ msgid "What do you wish to do?"
-#~ msgstr "Beth ydych eisiau wneud?"
-
-#, fuzzy
-#~ msgid "Rescue"
-#~ msgstr "Newid maint"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Pa fath o rhaniad ydych chi eisiau?"
-
-#, fuzzy
-#~ msgid "Configure LAN"
-#~ msgstr "Yn parataoi cyfluniad X-Window"
-
-#, fuzzy
-#~ msgid "Everything configured!"
-#~ msgstr "Yn parataoi cyfluniad X-Window"
-
-#, fuzzy
-#~ msgid "Autologin - Choose default user"
-#~ msgstr "Dewiswch y maint newydd"
-
-#, fuzzy
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Does gennych chi ddim rhaniadau!"
-
-#~ msgid "Normal > Expert"
-#~ msgstr "Cyffredinol > Arbennigwr"
-
-#~ msgid "Expert > Normal"
-#~ msgstr "Arbennigwr > Cyffredinol"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Maint: %s MB"
-
-#~ msgid "changing type of"
-#~ msgstr "newid math "
diff --git a/perl-install/share/po/da.po b/perl-install/share/po/da.po
deleted file mode 100644
index 68334d0e5..000000000
--- a/perl-install/share/po/da.po
+++ /dev/null
@@ -1,9753 +0,0 @@
-# Danish translation of/Dansk oversættelse af
-# Mandrake Linux DrakX.
-# Copyright (C) 1999-2001 MandrakeSoft
-#
-# In order of activity:
-# 1, Keld Simonsen <keld@dkuug.dk>, 2000-2001
-# 2, Jacob Nordfalk <nordfalk@mobilixnet.dk>, 2001
-# 3, Troels Liebe Bentsen <tlb@iname.com>, 1999-2000
-# 4, Nikolaj Berg Amondsen <mr_nba@get2net.dk>, 2000
-# 5, Jacob Sparre Andersen, <sparre@sslug.dk>, 2000
-# 6, Kenneth Christiansen, <kenneth@ripen.dk>, 2000
-# 7, Jens Burkal <jburkal@get2net.dk>, 1999
-# 8, Mads Stenhuus Hansen <msh@com.dtu.dk>, 1999
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-09-28 13:21+0200\n"
-"Last-Translator: Keld Simonsen <keld@dkuug.dk>\n"
-"Language-Team: dansk <dansk@klid.dk>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Konfigurér alle skærme uafhængigt"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Brug Xinerama-udvidelse"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigurér kun kort \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Flerskærms-konfiguration"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Dit system understøtter konfiguration af flere skærme\n"
-"Hvad vil du gøre?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Grafikkort"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Vælg et grafikkort"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Vælg en X-server"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X-server"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Hvilken konfiguration af XFree ønsker du?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Dit kort kan have 3D acceleration, men kun med XFree %s.\n"
-"Dit kort er understøttet af XFree %s som kan have bedre understøttelse i 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Dit kort kan have 3D hardware accelerations-understøttelse med XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s med 3D hardware acceleration"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Dit kort kan have 3D acceleration understøttelse, men kun med XFree %s,\n"
-"VIGTIGT: Dette er eksperimentelt og kan få din maskine til at låse eller gå "
-"ned."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s med EKSPERMENTAL 3d hardware acceleration"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Dit kort kan have 3D acceleration understøttelse, men kun med XFree %s.\n"
-"VIGTIGT: Dette er eksperimentelt og kan få din maskine til at låse eller gå "
-"ned.\n"
-"Dit kort er understøttet af XFree %s som kan have bedre understøttelse i 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installations-skærmdriver)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree konfiguration"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Vælg hukommelsesmængde for dit grafikkort"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Vælg server-indstillinger"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Vælg en skærmtype"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Skærm"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"De to kritiske parametre er den lodrette frekvens, som angiver hvor mange\n"
-"gange (per sekund) hele skærmbilledet bliver genopfrisket, og (vigtigst af "
-"alt)\n"
-"den vandrette frekvens, som angiver antallet af vandrette linier der kan\n"
-"tegnes på skærmen hvert sekund.\n"
-"\n"
-"Det er MEGET VIGTIGT at du ikke angiver en skærmtype med "
-"opdateringsfrekvenser,\n"
-"der er større end din skærms formåen: du risikerer at ødelægge din skærm.\n"
-"Hvis du er i tvivl, bør du vælge en opsætning, som du med SIKKERHED ved\n"
-"at din skærm kan klare."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Vandret opdateringsfrekvens"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Lodret opdateringsfrekvens"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Skærm ikke konfigureret"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Grafikkort er endnu ikke konfigureret"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Opløsninger ikke valgt endnu"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Ønsker du at afprøve konfigurationen?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Advarsel: afprøvning af dette grafikkort kan få din maskine til at låse"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Test konfigurationen"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"prøv at ændre nogle parametre"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "En fejl opstod:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Vender tilbage om %d sekunder"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Er dette den korrekte indstilling?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "En fejl opstod, prøv at ændre nogle parametre"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Opløsning"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Vælg opløsning og farvedybde"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafikkort: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86-server: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Ekspert modus"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Vis alle"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Opløsninger"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastatur-type: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Muse-type: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Muse-enhed: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Skærm: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Skærms vandrette frekvens: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Skærms lodrette frekvens: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafikkort: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafikkort identifikation: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafik-hukommelse: %s kb\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Farvedybde: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Opløsninger %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86-server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 driver: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Forbereder konfiguration af X"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Hvad ønsker du at gøre?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Skift skærmtype"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Skift grafikkort"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Foretag ændringer i server-indstillinger"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Skift opløsning"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Vis information"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Test igen"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Afslut"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Behold ændringer?\n"
-"Nuværende konfiguration er:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Log venligst ind i %s igen for at aktivere ændringerne"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Log venligst ud og tryk herefter på Ctrl-Alt-Bak"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "Start X ved systemstart"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Jeg kan sætte din maskine op til automatisk at starte X ved\n"
-"opstart. Ønsker du at starte X hver gang du genstarter?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 farver (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tusinde farver (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tusinde farver (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 millioner (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milliarder farver (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 Mb eller mere"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard-VGA, 640x480 ved 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super-VGA, 800x600 ved 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibel, 1024x768 ved 87 Hz interlaced (ikke 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ved 87 Hz interlaced, 800x600 ved 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Udvidet Super-VGA, 800x600 ved 60 Hz, 640x480 ved 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 ved 60 Hz, 800x600 ved 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Højfrekvens SVGA, 1024x768 ved 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frekvens, som kan klare 1280x1024 ved 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frekvens, som kan klare 1280x1024 ved 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frekvens, som kan klare 1280x1024 ved 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Skærm, som kan klare 1600x1200 ved 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Skærm, som kan klare 1600x1200 ved 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Første sektor af opstartspartition"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Første sektor på disken (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILO-installering"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Hvor vil du placere opstartsprogrammet?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "LILO/grub-installering"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO med tekstmenu"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO med grafisk menu"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Start fra DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Systemopstarterens hovedindstillinger"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Systemopstarter der skal bruges"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Systemopstarterens installation"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Opstartsenhed"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (virker ikke med gamle BIOS'er)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "kompakt"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Videoindstilling"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Ventetid før opstart af forvalgt styresystem"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Adgangskode"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Adgangskode (igen)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Begræns kommandolinie-indstillinger"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "begræns"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Rens /tmp ved hver systemopstart"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Præcis RAM-mængde, hvis påkrævet (fandt %d Mb)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Aktivér multiprofiler"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Angiv RAM-størrelse i Mb"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Indstillingen ``Begræns kommandolinie-indstillinger'' er intet værd uden\n"
-"en adgangskode"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Prøv venligst igen"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Adgangskoderne stemmer ikke overens"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Init-besked"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Åben firmwareforsinkelse"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Ventetid før kerneopstart"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Skal det være muligt at starte fra CD?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Skal det være muligt at starte fra OF?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Forvalgt styresystem?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Her er følgende typer indgange.\n"
-"Du kan tilføje flere eller ændre de eksisterende."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Tilføj"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Færdig"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Ændr"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Hvilken type ønsker du at tilføje"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Andet styresystem (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Andet styresystem (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Andet styresystem (Windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Billede"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Rod"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Vedhæft"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Læs-skriv"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Usikker"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Mærkat"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Forvalgt"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-størrelse"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "Ingen video"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Fjern indgang"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Tom mærkat er ikke tilladt"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Denne mærkat er allerede brugt"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Fandt %s %s grænsesnit"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Har du én til?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Har du nogen %s grænsesnit?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Nej"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Se info for maskinel"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installerer driver for %s kort %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hvilken %s driver skal jeg prøve?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"I nogen tilfælde behøver %s driveren at have ekstra information for at "
-"virke\n"
-"ordentligt, selv om den normalt virker fint uden. Ønsker du at angive "
-"ekstra\n"
-"optioner for den eller tillade driveren at sondere din maskine for\n"
-"den information den behøver? Af og til vil sondering stoppe maskinen, men "
-"burde\n"
-"ikke forårsage nogen skader."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Automatisk sondering"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Specificér optioner"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Du kan nu give dens optioner til modul %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Du kan nu sætte parametre til modulet %s.\n"
-"Parametrene er i formatet ``navn=værdi navn2=værdi2 ...''.\n"
-"F.eks., ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Modulindstillinger:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Indlæsning af modul %s mislykkedes.\n"
-"Ønsker du at prøve igen med andre parametre?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(har allerede tilføjet %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Adgangskoden er for simpel"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Indtast venligst et brugernavn"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Brugernavnet må kun indeholde små bogstaver, tal, `-' og `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Dette brugernavn eksisterer allerede"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Tilføj bruger"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Indtast en bruger\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Acceptér bruger"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Rigtige navn"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Brugernavn"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Skal"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Ikon"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:757
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Jeg kan sætte din maskine op til automatisk at logge en bestemt bruger på.\n"
-"Ønsker du at bruge denne finesse?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Vælg forvalgte bruger:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Vælg den vinduesbehandler du ønsker at benytte:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Vælg venligst det sprog, du vil bruge."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Du kan vælge andre sprog der vil være tilgængelige efter installationen"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Alt"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Velkommen til %s styresystems-vælger!\n"
-"\n"
-"Vælg et styresystem i den ovenstående liste eller\n"
-"vent %d sekunder for at starte standard.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Velkommen til GRUB styresystemsvælgeren!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Brug tasterne %c og %c til at vælge mellem mulighederne."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Tryk 'enter' for at starte det valgte OS, 'e' for at redigere"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "kommandoerne før opstart, eller 'c' for en kommandolinie."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Den fremhævede mulighed vil blive startet automatisk om %d sekunder."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "Ikke nok plads i /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Skrivebord"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Start-menu"
-
-#: ../../bootloader.pm_.c:972
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Du kan ikke installere opstartsindlæseren på en %s-partition\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "endnu er ingen hjælp implementeret.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfiguration af opstartsudseende"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Fil"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Fil/_Afslut"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<kontrol>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Katergoriserende oversigt i ny stil"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Oversigt i ny stil"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Traditionel oversigt"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Traditionel Gtk+-oversigt"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Start Aurora ved opstart"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modus"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Du bruger for øjeblikket % som opstartshåndterer.\n"
-"Klik på Konfigurér for at starte opsætnings-hjælperen."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Konfigurér"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Opstartsmåde"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Systemmodus"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Start X-vinduessystemet efter opstart"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Nej, jeg ønsker ikke automatisk login"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, jeg ønsker automatisk login med denne (bruger, skrivebord)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Annullér"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "kan ikke læse /etc/inittab: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Installationen af LILO mislykkedes. Følgende fejl opstod:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "Gb"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "Kb"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "Mb"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "Tb"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutter"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minut"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekunder"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Lav venligst en sikkerhedkopi af dine data først"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Læs omhyggeligt!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Hvis du planlægger at bruge Yaboot, skal du huske at efterlade fri plads på\n"
-"begyndelsen af disken (2048 sektorer skulle være nok)"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Fejl"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Guide"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Ny"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "Ekstern"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Monteringssti"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Valg"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Type"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Afmontér"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Montér"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Vælg handling"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Du har én stor FAT partition.\n"
-"(normalt brugt af Microsoft Dos/Windows).\n"
-"Jeg anbefaler, at du ændrer størrelsen på partitionen\n"
-"(klik på den, og klik herefter på \"Størrelsesændring\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Klik venligst på en partition"
-
-#: ../../diskdrake.pm_.c:240
-msgid "Please click on a media"
-msgstr "Klik venligst på et medie"
-
-#: ../../diskdrake.pm_.c:243
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr ""
-"Klik venligst på en knap ovenover\n"
-"Eller brug 'Ny'"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr "Brug 'Ny'"
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Detaljer"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Journalised FS"
-msgstr "Journaliserende FS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Tom"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Andet"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Filsystems-typer:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Opret"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Benyt ``%s'' i stedet"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Slet"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Benyt ``Afmontér'' først"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter type-ændring af partition %s vil alle data på denne partition gå tabt"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Hvor ønsker du at montere partitionen %s?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "Modulindstillinger"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "Diverse"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "Flytbare medier"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "Skift type"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Hvilket filsystem ønsker du at bruge?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "Tjekker tilgængelige delte nfs-ressurser"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "Tjekker tilgængelige delte nfs-ressurser på serveren %s"
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-"Hvis listen ovenover ikke indeholder den ønskede indgang, indtast den her:"
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Server"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "Delt resurse"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "Tjekker tilgængelige delte samba-ressurser"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "Tjekker tilgængelige delte samba-ressurser på serveren %s"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "Vælg en partition"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Vælg en ny partition"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Afslut"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Normal -> Ekspert"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Ekspert -> Normal"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Fortryd"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Fortsæt alligevel?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Afslut uden at gemme"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Afslut uden at skrive partitionstabellen?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ønsker du at gemme /etc/fstab-ændringerne?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Allokér automatisk"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Slet alt"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Mere"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "Drev-information"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Ikke nok fri plads til at tildele nye partitioner automatisk"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Alle primære partitioner er brugt"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Kan ikke tilføje flere partitioner"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"For at du kan få flere partitioner, skal du slette én, så der kan oprettes "
-"en udvidet partition"
-
-#: ../../diskdrake_interactive.pm_.c:285
-msgid "Save partition table"
-msgstr "Gem partitionstabel"
-
-#: ../../diskdrake_interactive.pm_.c:286
-msgid "Restore partition table"
-msgstr "Genskaber partitionstabel"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Redder partitionstabel"
-
-#: ../../diskdrake_interactive.pm_.c:289
-msgid "Reload partition table"
-msgstr "Genindlæs partitionstabel"
-
-#: ../../diskdrake_interactive.pm_.c:293
-msgid "Removable media automounting"
-msgstr "Automontering af flytbare medier"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Vælg fil"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Kopien af partitionstabellen har ikke samme størrelse\n"
-"Fortsæt alligevel?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Advarsel"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Indsæt en diskette i diskettedrevet\n"
-"Alle data på disketten vil blive slettet"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Forsøger at redde partitionstabellen"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "Detaljeret information"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Størrelsesændring"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Flyt"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formatér"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Aktiv"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Tilføj til RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Tilføj til LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Fjern fra RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Fjern fra LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Ændr RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Loopback anvendelse"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Opret en ny partition"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Startsektor: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Størrelse i Mb: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Filsystemstype: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Monteringssti: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Præference: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-msgid "Remove the loopback file?"
-msgstr "Fjern loopback-filen?"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Skift partitionstype"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "Skifter fra ext2 til ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Hvor ønsker du at montere loopback-fil %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kan ikke fjerne monteringssti, da denne partition bliver brugt til "
-"loopback.\n"
-"Fjern loopback først"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Udregner FAT-filsystemets grænser"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Ændrer størrelsen"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Størrelsen på denne partition kan ikke ændres"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Det bør laves en backup af alle data på denne partition"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter ændring af størrelsen af partition %s, vil alle data på denne "
-"partition gå tabt"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Vælg den nye størrelse"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "Ny størrelse i Mb: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Hvilken disk ønsker du at flytte den til?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Hvilken sektor ønsker du at flytte den til?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Flytter"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Flytter partition..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Vælg en eksisterende RAID som skal udvides"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "ny"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Vælg en eksisterende LVM som skal udvides"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "LVM-navn?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Denne partition kan ikke bruges til loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Loopback-filnavn: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-msgid "Give a file name"
-msgstr "Giv et filnavn"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Filen er allerede brugt af en anden loopback, vælg en anden fil"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Filen findes allerede. Skal den bruges?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "enhed"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "niveau"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "enhedsstørrelse"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Vær forsigtig: denne operation er farlig."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Hvilken slags partitionering?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Jeg kan desværre ikke på nuværende tidspunkt acceptere at oprette /boot på\n"
-"drevet (på en cylinder > 1024).\n"
-"Enten benytter du LILO, hvilket ikke vil fungere, eller du kan undlade at "
-"benytte\n"
-"LILO, hvilket vil betyde, at du ikke har brug for /boot"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Den partition som du har valgt som rod-partition (/) er fysisk placeret ud\n"
-"over cylinder nr. 1024 på harddisken, og du har ikke lavet nogen /boot\n"
-"partition. Hvis du ønsker at benytte LILO, skal du oprette en /boot "
-"partition\n"
-"indenfor 1024-cylinder grænsen."
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Du har valgt en programmeret RAID-partition som rod (/).\n"
-"Ingen systemopstarter kan håndtere dette uden en /boot partition.\n"
-"Så vær omhyggelig med at tilføje en /boot partition"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partitionstabellen for disk %s vil nu blive skrævet på disken!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Du skal genstarte maskinen for at aktivere ændringerne"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter formatering af partitionen %s vil alle data på denne partition gå tabt"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Formaterer"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formaterer loopback-fil %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formaterer partition %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Hide files"
-msgstr "Skjul filer"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Move files to the new partition"
-msgstr "Flyt filer til den nye partition"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Katalog %s indeholder allerede nogen data\n"
-"(%s)"
-
-#: ../../diskdrake_interactive.pm_.c:906
-msgid "Moving files to the new partition"
-msgstr "Flytter filer til den nye partition"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr "Kopierer %s"
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, c-format
-msgid "Removing %s"
-msgstr "Fjerner %s"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Enhed: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-drevbogstav: %s (bare et gæt)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Type: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Navn: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Start: sektor %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Størrelse: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorer"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Cylinder %d til cylinder %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Formateret\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Ikke formateret\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Monteret\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback-fil(er):\n"
-"   %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partition som opstartes som standard\n"
-"    (gælder kun MS-DOS-opstart, ikke LILO)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Niveau %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Enhedsstørrelse %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diske %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback-filnavn: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Denne partition er nok\n"
-"en driver-partition, du skal\n"
-"sandsynligvis lade den være.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Denne specielle Bootstrap-\n"
-"partition er for at\n"
-"dual-boote dit system.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Størrelse: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Opbygning: %s cylindre, %s hoveder, %s sektorer\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diske %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitionstabel-type: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "på bus %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Valg: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering af %s mislykkedes"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ved ikke hvordan man formaterer %s som type %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "montering mislykkedes"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck afsluttet med fejlkode %d eller signal %d"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "montering mislykkedes: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fejl ved afmontering af %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simpel"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Du kan ikke bruge JFS på partitioner mindre end 16Mb"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Du kan ikke bruge ReiserFS på partitioner mindre end 32Mb"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Monteringsstier skal begynde med /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Der findes allerede en partition med monterings-sti %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Du kan ikke bruge et LVM logisk delarkiv for monteringspunkt %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Dette katalog bør ligge på rod-filsystemet"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Du skal have et rigtigt filsystem (ext2, reiserfs) til dette "
-"monteringspunkt\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fejl ved åbning af %s for skrivning: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Der er opstået en fejl - der kunne ikke findes nogen gyldige enheder, hvor "
-"der kan oprettes nye filsystemer. Undersøg venligst din maskine for at finde "
-"årsagen til problemet"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Du har ikke nogen partitioner!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux er et flerbrugersystem, og dette betyder at hver bruger kan have\n"
-"sine egne præferencer, sine egne filer og så videre. Du kan læse\n"
-"brugervejledningen for at lære mere.\n"
-"Men i modsætning til root, som er administratoren, vil brugerne som du\n"
-"tilføjer her ikke have lov til at ændre nogetsomhelst undtagen deres egne\n"
-"filer og deres egen opsætning. Du skal oprette i det mindste én almindelig\n"
-"bruger til dig selv.\n"
-"Dette er den konto som du bør bruge til almindelig brug. Selvom det er\n"
-"meget praktisk at logge ind som root hver dag, kan det også være meget "
-"farligt!\n"
-"Den mindste fejltagelse kan betyde at dit system ikke vil virke mere.\n"
-"Hvis du laver en alvorlig fejltagelse som almindelig bruger, vil du kun\n"
-"måske tabe nogen information, men ikke hele systemet.\n"
-"\n"
-"Først skal du indtaste dit rigtige navn. Dette er ikke krævet, selvfølgelig\n"
-"kan du faktisk skrive hvad du vil. DrakX vil så tage det første ord du "
-"skrev\n"
-"i boksen og og overføre det som brugernavn. Dette er navnet, som denne "
-"bruger\n"
-"skal bruge for at logge ind på systemet. Du kan ændre dette. Du skal så\n"
-"indtaste en adgangskode hér. Adgangskoden for en ikke-priviligeret (normal) "
-"bruger\n"
-"er ikke så vigtigt som det for Root fra et sikkerhedsmæssigt synspunkt,\n"
-"men det er ingen grund til at negligere det alligevel - når det kommer\n"
-"til stykket er dine filer der er i fare.\n"
-"Hvis du klikker på Acceptér bruger, kan du tilføje så mange som du ønsker.\n"
-"Tilføj en bruger for hver af dine venner: fx din far og din søster.\n"
-"Når du har tilføjet alle de brugere du ønsker, vælg da Færdig.\n"
-"\n"
-"Klik på Avanceret-knappen lader dig ændre standard-skal for denne bruger\n"
-"(bash er standard)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ovenfor er listet de eksisterende Linux-partitioner genkendt på din disk.\n"
-"Du kan beholde valgene gjort af guiden, de er velegnede til almindelig\n"
-"brug.  Hvis du ændrer disse valg skal du i det mindste definere en\n"
-"rod-partition '/'. Lad være med at vælge en for lille partition, ellers\n"
-"vil du ikke kunne installere nok programmel. Hvis du ønsker at lagre data "
-"på\n"
-"en separat partition, skal du også vælge en '/home' (kun muligt hvis du har\n"
-"mere end én Linux-partition).\n"
-"\n"
-"Hver partition er listet som følger: 'Navn', 'Kapacitet'.\n"
-"\n"
-"'Navn' er kodet som følger: 'drevtype', 'drevnummer', 'partitionsnummer'\n"
-"(for eksempel '/hda1').\n"
-"\n"
-"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er\n"
-"et SCSI drev.\n"
-"\n"
-"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev:\n"
-"\n"
-"   * 'a' betyder 'hoved-drev på den primære IDE controller',\n"
-"\n"
-"   * 'b' betyder 'slave-drev på den primære IDE controller',\n"
-"\n"
-"   * 'c' betyder 'hoved-drev på den sækundære IDE controller',\n"
-"\n"
-"   * 'd' betyder 'slave-drev på den sækundære IDE controller'.\n"
-"\n"
-"For SCSI drev betyder 'a' det 'første drev', 'b' betyder det 'andet drev', "
-"osv."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux installationen er fordelt på flere cdrom-er. DrakX véd om\n"
-"en valgt pakker ligger på en anden cdrom og vil udskyde den aktuelle cd og "
-"bede dig om at indsætte en anden, om nødvendigt."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Det er nu tid til at angive hvilke pakker du vil installere på dit system.\n"
-"Der er tusinder af pakker til dit Mandrake Linux system, og det forventes "
-"ikke\n"
-"at du kender dem allesammen udenad.\n"
-"\n"
-"Hvis du udfører en standard-installation fra cdrom vil du først blive\n"
-"bedt om at angive de cd-er som du har nu. Tjek boksene svarende til de\n"
-"cd-er du har liggende for installationen. Klik O.k. når du er klar\n"
-"til at fortsætte.\n"
-"\n"
-"Pakkerne er ordnet i grupper svarende til en bestemt anvendelse af din "
-"maskine. Grupperne er selv ordnet i 4 grupper:\n"
-"\n"
-" * Arbejdsstation: Hvis din maskine skal bruges som en arbejdsstation, vælg\n"
-"da en eller flere af de tilsvarende grupper.\n"
-"\n"
-" * Grafisk miljø: Vælg her dit foretrukne grafiske miljø. Vælg mindst ét,\n"
-"hvis dø ønsker at have en grafisk arbejdsstation!\n"
-"\n"
-" * Udvikling: hvis maskinen skal bruges til programmering vælg da de "
-"ønskede\n"
-"grupper.\n"
-"\n"
-" * Server: Endelig, hvis maskinen er beregnet til at være en server, er du "
-"her i\n"
-"stand til at vælge de mest almindelige tjenester, som du ønsker at se "
-"installeret \n"
-"på maskinen.\n"
-"\n"
-"Ved flytning af musen over et gruppenavn vises en kort forklarende tekst om\n"
-"denne gruppe.\n"
-"\n"
-"Et klik på Avanceret-knappen vil lade dig vælge muligheden Individuelt "
-"pakkevalg.\n"
-"Dette er nyttigt, hvis du kender de tilbudte pakker godt, eller hvis du "
-"ønsker\n"
-"at have fuld kontrol over hvad der skal installeres.\n"
-"\n"
-"Hvis du har startet installationen i 'Opdatering'-tilstand, kan du fravælge "
-"alle\n"
-"grupper for at undgå at installere nogen nye pakker, og bare reparere eller\n"
-"opdatere det eksisterende system."
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Endelig, afhængigt af om du valgte at udvælge individuelle pakker eller ej,\n"
-"vil du blive præsenteret for et træ med alle pakker opdelt i grupper og\n"
-"undergrupper. Under gennembladring af træet kan du udvælge hele grupper,\n"
-"undergrupper eller bare pakker.\n"
-"\n"
-"Hver gang du udvælger en pakke i træet vil en beskrivelse fremkomme til "
-"højre.\n"
-"Når du har afsluttet dine udvælgelser, så klik på Installér-knappen. Så "
-"begynder\n"
-"selve installationen. Afhængig af din maskines hurtighed og antal pakker\n"
-"som skal installeres kan det tage et stykke tid at gøre processen færdig.\n"
-"Et skøn på tiden det tager for færdiggørelse vises på skærmen, så du kan se\n"
-"om der skulle være tid til at nyde en kop kaffe.\n"
-"\n"
-"I tilfældet af at en server-pakke er blevet valgt enten med vilje, eller\n"
-"fordi den var en del af en hel gruppe, vil du blive spurgt om du virkelig\n"
-"ønsker at installere disse servere. Under Linux Mandrake bliver "
-"installerede\n"
-"servere startet op ved opstart af maskinen. Selvom de er sikre og ikke har\n"
-"nogen kendte problemer på udgivelsestidspunktet for distributionen, er det\n"
-"muligt at sikkerhedshuller opdages efter at denne version af Mandrake\n"
-"Linux blev færdiggjort. Specielt hvis du ikke véd hvad det er for noget,\n"
-"så klik Nej her. Et klik med Ja her vil installere de nævnte servere\n"
-"og de vil som standard blive startet automatisk!\n"
-"\n"
-"Automatiske afhængigheder-valget deaktiverer simpelthen advarselsdialogen,\n"
-"som vises hver gang installeringsprogrammet automatisk vælger en pakke.\n"
-"Dette sker fordi det er blevet beregnet at den er krævet for at\n"
-"tilfredsstille en afhængighed fra en anden pakke for at kunne færdiggære\n"
-"en vellykket installation.\n"
-"\n"
-"Det klejne disketteikon i bunden af listen muliggør indlæsning af en\n"
-"pakkeliste udvalgt ved en tidligere installation. Klik på denne ikon\n"
-"vil bede dig om at indsætte en diskette tidligere frembragt ved slutningen\n"
-"på en anden installation. Se råd nr to i det sidste trin for hvordan\n"
-"en sådan diskette kan laves."
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Hvis du vil forbinde din maskine til internettet eller til et lokalnetværk\n"
-"så vælg venligst den rigtige mulighed. Tænd venligst for din enhed før\n"
-"valg af den rigtige mulighed for at lade DrakX opdage enheden automatisk.\n"
-"\n"
-"Mandrake Linux tilbyder dig at opsætte din internetforbindelse på\n"
-"installeringstidspunktet. Mulige forbindelser er: almindeligt modem, ISDN-"
-"modem,\n"
-"ADSL-forbindelse, kabel-modem, og endelig en simpel LAN-forbindelse "
-"(Ethernet).\n"
-"\n"
-"Vi vil ikke her gå i detaljer med hver konfiguration. Men forsikr dig om,\n"
-"at du har alle parametrene fra din internetudbyder eller "
-"systemadministrator.\n"
-"\n"
-"Du kan læse i kapitlet i håndbogen omkring internetforbindelser om detaljer\n"
-"omkring konfigureringen, eller simpelthen vente til dit system er "
-"installeret\n"
-"og så bruge programmet beskrevet dér til at konfigurere din forbindelse.\n"
-"\n"
-"Hvis du vil konfigurere netværket senere efter installationen, eller hvis "
-"du\n"
-"har afsluttet konfigureringen af din netværksforbindelse, vælg da 'Færdig'."
-
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Du kan nu vælge hvilke tjenester du ønsker skal startes ved opstart af "
-"maskinen.\n"
-"\n"
-"Her præsenteres alle de tjenester, som er med i den aktuelle installation.\n"
-"Gennemse dem omhyggeligt og vælg dem fra som ikke altid er nødvendige ved "
-"opstarten.\n"
-"\n"
-"Du kan få en kort forklarende tekst om en tjeneste ved at vælge en bestemt "
-"tjeneste.\n"
-"Hvis du ikke er sikker på om en tjeneste er nyttig eller ej, er det dog "
-"sikrere at bruge den foreslåede opførsel.\n"
-"\n"
-"Vær specielt varsom på dette trin hvis du planlægger at bruge maskinen som\n"
-"server: du vil formentlig ønske ikke at starte nogensomhelst tjeneste\n"
-"op som du ikke har brug for. Husk venligst at adskillige tjenester kan være\n"
-"farlige hvis de er aktiveret på en server.\n"
-"Vælg som hovedregel kun de tjenester som du virkelig behøver."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux administrerer tid i GMT (Greenwich Mean Time) og oversætter det\n"
-"til lokaltid svarende til den tidszone du har valgt."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-"X (for X-vinduessystem) er hjertet af GNU/Linux' grafiske grænseflade,\n"
-"hvilet alle de grafiske miljøer (KDE, Gnome, AfterStep, WindowMaker)...),\n"
-"som kommer med Mandrake Linux, bygger på. I dette afsnit vil drakX forsøge\n"
-"at konfigurere X automatisk.\n"
-"\n"
-"Det er meget sjældent at dette mislykkes for drakX, med mindre maskinellet\n"
-"er meget gammelt (eller meget nyt). Hvis det lykkes, vil drakX starte X\n"
-"automatisk med den bedst mulige opløsning afhængig af skærmens størrelse.\n"
-"Et vindue vil så komme frem og spørge om du kan se det.\n"
-"\n"
-"Hvis du laver en ekspert-installering, vil du komme ind i X-konfigurerings-\n"
-"guiden. Se det tilhørende afsnit af manualen for yderligere oplysning om\n"
-"denne guide.\n"
-"\n"
-"Hvis du kan se beskeden, og svarer Ja, så vil drakX fortsætte til det næste\n"
-"trin. Hvis du ikke kan se beskeden, betyder det simpelthen at "
-"konfigurationen\n"
-"var forkert, og testen vil automatisk afsluttes efter 10 sekunder, og \n"
-"genfremvise skærmen."
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Måske er du ikke særligt tilfreds med det første forsøg med X konfigurering\n"
-"(skærmen for lille, flyttet til venstre eller højre...). Derfor vil drakX\n"
-"spørge dig om konfigurationen passer dig, selvom X starter op korrekt.\n"
-"DrakX vil også foreslå ændringer ved at vise en liste af gyldige tilstande\n"
-"som den kunne finde, og så bede dig om at vælge én.\n"
-"\n"
-"Som en sidste udvej, hvis du stadig ikke kan få X til at virke, vælg da\n"
-"Ændr grafikkort, vælg Ukendt kort, og når du bliver spurgt om hvilken\n"
-"server du vil have, vælg da FBDev. Dette er en fejlsikker mulighed som\n"
-"virker med alle moderne grafikkort. Vælg derefter Test igen for at være "
-"sikker."
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Til sidst vil du blive spurgt om du ønsker at se den grafiske grænseflade\n"
-"ved opstart. Bemærk at du vil blive spurgt om dette selvom du har valgt\n"
-"ikke at afprøve konfigurationen. Selvfølgelig vil du ønske at svare Nej,\n"
-"hvis din maskine skal bruges som server, eller hvis ikke lykkedes dig at\n"
-"få skærmen konfigureret."
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux-cdrommen har en indbygget rednings-tilstand. Du kan få fat\n"
-"i denne ved at starte op fra cdrommen, trykke 'F1'-tasten ved opstart, og\n"
-"indtaste 'rescue' ved opstartsledeteksten. Men i tilfælde af at din maskine\n"
-"ikke kan starte op fra cdrommen, bør du komme tilbage til dette trin for\n"
-"hjælp i mindst to situationer:\n"
-"\n"
-" * ved installering af opstartsindlæseren vil drakX genskrive "
-"opstartssektoren\n"
-"(MBR) på din hoveddisk (medmindre du bruger en anden opstartshåndterer) så\n"
-"du kan starte enten Windows eller GNU/Linux (forudsat du har Windows på dit\n"
-"system). Hvis du har brug for at geninstallere Windows, vil Microsoft\n"
-"installeringsprocessen overskrive opstartssektoren, og så vil du ikke være "
-"i\n"
-"stand til at starte GNU/Linux!\n"
-"\n"
-" * Hvis der opstår et problem, og du ikke kan starte GNU/Linux op fra "
-"harddisken,\n"
-"vil denne diskette være den eneste måde at starte GNU/Linux op på. Den "
-"indeholder\n"
-"et pænt antal systemværktøjer for at genetablere et system som er gået ned\n"
-"pga. strømsvigt, en uheldig tastefejl, en skrivefejl i en adgangskode, "
-"eller\n"
-"nogen anden årsag.\n"
-"\n"
-"Når du klikker på dette trin, vil du blive bedt om at indsætte en diskette "
-"i\n"
-"drevet. Disketten du indsætter skal være tom eller kun indeholde data som\n"
-"du ikke har brug for. Du behøver ikke formatere den; drakX vil overskrive\n"
-"hele disketten."
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Nu skal du vælge hvor du vil installere dit\n"
-"Mandrake Linux-operativsystem på din harddisk. Hvis disken er tom eller\n"
-"et eksisterende operativsystem bruger alt pladsen på den, bliver du nødt\n"
-"til at partitionere den. Når disken partitioneres, deles den i logiske\n"
-"dele for at gøre plads til dit nye Mandrake Linux-system.\n"
-"\n"
-"Da en partitionering normalt ikke kan fortrydes kan det godt være \n"
-"frustrerende og stressende for nybegyndere. Heldigvis er der en guide\n"
-"som forenkler denne proces. Før du begynder se da i manualen\n"
-"og tag den tid du skal bruge.\n"
-"\n"
-"Hvis du kører installeringen i ekspert-tilstand kommer du ind i Mandrake\n"
-"Linux' partitioneringsværktøj, DiskDrake. Dette vil lade dig finindstille\n"
-"dine partitioner. Se kapitlet om DiskDrake i manualen.\n"
-"Fra installations-grænsefladen kan du bruge de guider som beskrevet her\n"
-"ved at klikke knappen Guider på grænsefladen.\n"
-"\n"
-"Hvis partitionerne allerede er definerede (fra en tidlige installation eller "
-"fra et andet partitions-værktøj), skal du bare vælge dem for at installere\n"
-"dit Linux system\n"
-"\n"
-"Hvis partitionerne ikke er lavet endnu, bliver du nødt til at oprette dem\n"
-"ved brug af guiden. Afhængig af din disks konfiguration er flere\n"
-"muligheder tilstede:\n"
-"\n"
-" * Brug fri plads: Dette vil simpelthen føre til en automatisk opdeling af "
-"dine blanke drev; du behøver ikke at bekymre dig yderligere.\n"
-"\n"
-" * Brug eksisterende partition: guiden har fundet en eller flere Linux-"
-"partitioner på din harddisk. Hvis du vil beholde dem, vælg denne mulighed.\n"
-"\n"
-" * Brug den fri plads på Windows-partitionen: hvis Microsoft Windows er "
-"installeret på din disk og bruger al pladsen, bliver du nødt til at\n"
-"lave plads til Linux. For at gøre det kan du slette dine\n"
-"Microsoft Windows partitioner og data (se \"Slet hele disken\" eller\n"
-"\"Ekspert niveau\" ) eller ændre størrelsen på\n"
-"din Microsoft Windows-partition. Størrelsesændringen kan fortages uden tab\n"
-"af data. Denne løsning er anbefalet hvis du vil bruge både Mandrake Linux\n"
-"og Microsoft Windows på samme maskine.\n"
-"\n"
-"  Før du vælger denne løsning, bør du forstå at størrelsen på din Microsoft\n"
-"Windows partition vil blive mindre. Det betyder at du vil have mindre fri "
-"plads under\n"
-"Microsoft Windows til at gemme din data eller installere programmel.\n"
-"\n"
-" * Slet hele disken: hvis du vil slette alle data på alle partitioner på "
-"denne disk og erstatte dem med dit nye Mandrake Linux-system, kan du\n"
-"vælge denne mulighed. Vær forsigtig med denne løsning, du vil ikke\n"
-"være i stand til at fortryde dine ændringer.\n"
-"\n"
-"   !! Hvis du bruger denne mulighed vil alle data på din disk gå tabt. !!\n"
-"\n"
-" * Fjern Windows: dette vil simpelthen slette alt på disken og begynde fra\n"
-"en frisk, og partitionere fra ny. Al data på din disk blive tabt.\n"
-"\n"
-"   !! Hvis du bruger denne mulighed vil alle data på din disk gå tabt. !!\n"
-"\n"
-" * Ekspert-modus: hvis du vil partitionere disken manuelt, kan du vælge "
-"dette alternativ. Vær forsigtig før du\n"
-"vælger denne løsning. Den giver dig mange muligheder, men er også farlig. \n"
-"Du kan nemt komme til at slette alle dine data. Så\n"
-"lad være med at vælge den løsning med mindre du véd hvad du gør."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Værsgo'. Installationen en nu færdig og dit GNU/Linux-system er nu klar\n"
-"til brug. Klik bare O.k. for at genstarte systemet. Du kan starte GNU/Linux\n"
-"eller Windows, som du foretrækker det (hvis du har to systemer), så snart\n"
-"din maskine er startet op igen.\n"
-"\n"
-"Avanceret-knappen viser to ekstra knapper for at:\n"
-"\n"
-" * generere en auto-installeringsdiskette: for at oprette en installerings-\n"
-"diskette som automatisk vil udføre en hel installation uden hjælp fra en\n"
-"operatør, magen til den installation du lige har konfigureret.\n"
-"\n"
-"   Bemærk at to forskellige muligheder er tilstede efter klik på knappen:\n"
-"\n"
-"   * Genafspil: Dette er en delvist automatiseret installering da \n"
-"partitioneringstrinnet (og kun dette trin) forbliver interaktiv.\n"
-"\n"
-"   * Automatisk: Fuldautomatisk installering: harddisken bliver fuldstændig\n"
-"genoverskrevet, alle data forsvinder.\n"
-"\n"
-"   Denne facilitet er meget nyttig ved installering af et stort antal\n"
-"ens maskiner. Se afsnittet om autoinstallering på vores websted.\n"
-"\n"
-" * Gem pakkevalg(*): Gemmer pakkevalget som lavet tidligere.\n"
-"Så når en ny installering laves, kan disketten indsættes i drevet og\n"
-"installeringen kan køres ved at bruge F1 på hjælpeskærmen idet der\n"
-"indtastes >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Du skal have en diskette formateret til FAT (denne oprettes i\n"
-"GNU/Linux ved at skive \"mformat a:\")"
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Enhver partition der netop er blevet defineret, skal formateres til brug\n"
-"(formatering betyder oprettelse af et filsystem).\n"
-"\n"
-"Nu kan du også ønske at omformatere nogle allerede eksisterende partitioner\n"
-"for at slette de data som de indeholder. Hvis du ønsker dette, så vælg\n"
-"venligst også de partitioner som du ønsker at formatere.\n"
-"\n"
-"Bemærk venligst at det ikke er nødvendigt at omformatere alle allerede\n"
-"eksisterende partitioner. Det er nødvendigt at omformatere de partitioner,\n"
-"der indeholder operativsystemet (såsom '/', '/usr' og '/var', men du er\n"
-"ikke nødt til at omformatere partitioner som du ønsker at beholde\n"
-"(typisk /home).\n"
-"\n"
-"Vær venligst forsigtig med valg af partitioner; efter formatering vil\n"
-"alle data være slettede på de valgte partitioner, og du vil ikke\n"
-"kunne redde nogetsomhelst af det.\n"
-"\n"
-"Klik på 'Ok' når du er klar til at formatere partitioner.\n"
-"\n"
-"Klik på 'Annullér' hvis du ønsker at vælge andre partitioner til at\n"
-"installere dit nye Mandrake Linux operativsystem.\n"
-"\n"
-"Klik på 'Avanceret' for at vælge partitioner som du ønsker at tjekke for\n"
-"dårlige blokke."
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Dit nye Mandrake Linux styresystem er i færd med at blive installeret.\n"
-"Afhængig af det antal pakker, du installerer og hastigheden på din\n"
-"maskine kan dette tage fra nogen få minutter til en del længere tid.\n"
-"\n"
-"Hav venligst tålmodighed."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"Før du går videre bør du læse betingelserne i licensen omhyggeligt. \n"
-"Den omfatter hele Mandrake Linux distributionen, og hvis du ikke er \n"
-"enig i alle betingelserne i den, så klik på 'Nægt'-knappen. Det vil \n"
-"øjeblikkeligt afslutte installationen. For at fortsætte installationen \n"
-"skal du klikke på 'Acceptér'-knappen."
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Nu er det tid til at vælge det ønskede sikkerhedsniveau for maskinen.\n"
-"Hovedreglen er at jo mere kendt maskinen er, og jo vigtigere data er, \n"
-"des højere bør sikkerhedsniveauet være. Men et højere sikkerhedsniveau "
-"vindes \n"
-"normalt på bekostning af letheden af anvendelsen. Kig i kapitlet MSEC i \n"
-"referencehåndbogen for mere information om betydningen af niveauerne.\n"
-"\n"
-"Hvis du ikke véd hvad du skal vælge, så behold den foreslåede mulighed."
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Nu skal du vælge hvor Mandrake Linux skal installeres. Hvis partitionerne\n"
-"allerede er lavet, enten fra en tidligere installation af GNU/Linux eller "
-"fra\n"
-"et andet partitioneringsværktøj), kan du bruge dem. Ellers skal "
-"partitionerne\n"
-"laves først.\n"
-"\n"
-"For at lave partitioner, skal du først vælge en harddisk. Du kan vælge\n"
-"disken der skal partitioneres ved at trykke på \"hda\" for den første IDE\n"
-"disk, \"hdb\" for den anden eller \"sda\" for den første SCSI disk og så "
-"videre.\n"
-"\n"
-"For at partitionere den valgte disk kan du bruge disse muligheder:\n"
-"\n"
-"   * Slet alt: Dette valg sletter alle partitioner på den valgte disk.\n"
-"\n"
-"  * Allokér automatisk: dette valg tillader dig automatisk at lave Ext2 og\n"
-"swappartitioner på den fri plads på din disk.\n"
-"\n"
-"  * Red partitionstabel: hvis din partitionstabel er beskadiget, kan du\n"
-"prøve at redde den med denne mulighed. Vær venligst forsigtig og husk\n"
-"at det kan slå fejl.\n"
-"\n"
-" * Fortryd: Du kan bruge denne mulighed for at annullere dine ændringer.\n"
-"\n"
-" * Genindlæs: Du kan bruge denne mulighed hvis du ønsker at fortryde alle\n"
-"ændringer og genindlæse din oprindelige partitionstabel\n"
-"\n"
-" * Guide: Hvis du ønsker at bruge guiden til at partitionere din disk, kan\n"
-"du bruge denne mulighed. Dette anbefales, hvis du ikke har det store\n"
-"kendskab til partitionering.\n"
-"\n"
-" * Genskab fra diskette: Denne mulighed tillader dig at\n"
-"genskabe en tidligere gemt partitionstabel fra diskette.\n"
-"\n"
-" * Gem på diskette: Gemmer din partitionstabel på en diskette.\n"
-"Nyttigt bed senere redning af partitionstabellen, om nødvendigt.\n"
-"Det er stærkt anbefalet at bruge dette trin.\n"
-"\n"
-" * Færdig: når du er færdig med partitionering af din disk, så tryk på\n"
-"\"Færdig\", dette vil skrive ændringerne tilbage på disken.\n"
-"\n"
-"Bemærk: du kan nå alle mulighederne ved at bruge tastaturet: navigér\n"
-"gennem partitionerne med Tab og op- og ned-pilene.\n"
-"\n"
-"Når en partition er valgt kan du bruge:\n"
-"\n"
-" * Ctrl-c for at lave en ny partition (Når en tom partition er valgt);\n"
-"\n"
-" * Ctrl-d for at slette en partition;\n"
-"\n"
-" * Ctrl-m for at sætte et monteringssti.\n"
-"\n"
-"Hvis du er i gang med at installere på en PPC-maskine skal du lave en lille "
-"HFS-'bootstrap'-partition på mindst 1MB til \n"
-"Yaboot-systemstarteren. Hvis du vælger at lave partitionen en smule større, "
-"f.eks 50MB kan den være nyttig til at gemme\n"
-"en ekstra kerne og ramdisk-billede for nødsituationer ved opstart."
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Mere end én Microsoft Windows partition er blevet genkendt på dit diskdrev.\n"
-"Vælg venligst den som du ønsker at ændre størrelse på for at kunne\n"
-"installere dit nye Mandrake Linux operativsystem.\n"
-"\n"
-"Hver partition er listet som følger: 'Linux navn', 'Windows navn',\n"
-"'Kapacitet'.\n"
-"\n"
-"'Linux navn' er kodet som følger: 'drevtype', 'drevnummer',\n"
-"'partitionsnummer' (for eksempel '/hda1').\n"
-"\n"
-"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er\n"
-"et SCSI drev.\n"
-"\n"
-"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev:\n"
-"\n"
-"   * 'a' betyder 'hoved-drev på den primære IDE controller',\n"
-"\n"
-"   * 'b' betyder 'slave-drev på den primære IDE controller',\n"
-"\n"
-"   * 'c' betyder 'hoved-drev på den sækundære IDE controller',\n"
-"\n"
-"   * 'd' betyder 'slave-drev på den sækundære IDE controller'.\n"
-"\n"
-"For SCSI drev betyder 'a' det 'første drev', 'b' betyder det 'andet drev', "
-"osv.\n"
-"\n"
-"'Windows navn' er det bogstav som dit drev har under Windows (den første\n"
-"disk eller partition kaldes 'C:')."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Hav venligst tålmodighed. Denne handling kan tage adskillige minutter."
-
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"DrakX skal nu vide om du vil udføre en forvalgt ('Anbefalet') installation,\n"
-"eller om du ønsker at have større kontrol ('Ekspert'). Du kan også\n"
-"vælge om du ønsker at udføre en installering eller en opgradering af et \n"
-"eksisterende system. Klik på 'Installér' vil helt udtvære det eksisterende\n"
-"system. Vælg 'Opgradér' hvis du vil opgradere eller reparere et\n"
-"eksisterende system.\n"
-"\n"
-"Vælg venligst \"Installér\" hvis du ikke har nogen tidligere version af\n"
-"Mandrake Linux installeret eller du ønsker at have flere operativsystemer.\n"
-"\n"
-"Vælg venligst \"Opdatér\" hvis ønsker at at opdatere en allerede "
-"installeret\n"
-"version af Mandrake Linux.\n"
-"\n"
-"Afhængig af din viden om GNU/Linux kan du vælge en af de følgende niveauer\n"
-"under din installation eller opdatering af dit Mandrake Linux styresystem:\n"
-"\n"
-"* Anbefalet: hvis du aldrig har installeret et GNU/Linux operativ system så\n"
-"vælg det her. Installationen vil være meget nem og du vil kun blive\n"
-"stillet nogen få spørgsmål.\n"
-"\n"
-"* Ekspert: hvis du har en god viden om GNU/Linux, kan du vælge dette\n"
-"installationsniveau. Ekspertinstallationen vil lade dig lave meget "
-"tilpassede installationer. Besvarelse af nogen af spørgsmålene\n"
-"kan være meget svær hvis du ikke har så godt et kendskab til\n"
-"GNU/Linux. Så lad være med at vælge dette, medmindre du ved hvad du laver."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalt vil drakX have valgt det rigtige tastatur til dig (afhængigt af \n"
-"sproget du har valgt) og du vil så ikke se dette trin. Men du har måske "
-"ikke \n"
-"et tastatur som svarer nøjagtigt til dit sprog: for eksempel hvis du er en \n"
-"engelsktalende svejtser, vil du måske stadig ønske at dit tastatur skal "
-"være \n"
-"et svejtsisk tastatur. Eller hvis du taler engelsk men bor i Québec, er du \n"
-"måske i samme situation. I begge tilfælde må du gå tilbage til dette \n"
-"installationstrin og vælge et passende tastatur fra listen.\n"
-"\n"
-"Klik på 'mere'-tasten for at blive præsenteret for den fulde \n"
-"liste af understøttede tastaturer."
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-"Vælg venligst dit foretrukne sprog for brug under installation og på "
-"systemet.\n"
-"\n"
-"Der er en Avanceret-knap som lader dig vælge andre sprog, der installeres \n"
-"på maskinen. Valg af andre sprog vil installere de sprogspecifikke filer\n"
-"for systemdokumentation og programmer. Hvis du for eksempel vil beværte\n"
-"folk fra Spanien på din maskine, vælg da engelsk som hovedsproget\n"
-"i træ-visningen, og afkryds så i den avancerede afdeling boksen \n"
-"svarende til spansk|Spanien.\n"
-"\n"
-"Bemærk at flere sprog kan installeres samtidigt. Når du er færdig med\n"
-"at vælge yderligere sprog, så klik O.k. for at fortsætte."
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-"Normalt antager drakX at du har en to-knapsmus og vil lave en opsætning\n"
-"hvor den tredje knap emuleres. DrakX vil automatisk vide om den er PS/2,\n"
-"seriel eller USB.\n"
-"\n"
-"Hvis du ønsker en anden type mus, vælg da den rigtige type mus fra den\n"
-"viste liste.\n"
-"\n"
-"Hvis du vælger en mus forskellig fra den forvalgte, vil du blive "
-"præsenteret\n"
-"for en skærm for museafprøvning. Brug knapperne og hjulet for at "
-"efterprøve,\n"
-"om indstillerne er gode. Hvis musen ikke virker korrekt, tryk da på\n"
-"mellemrumstangenten eller vognretur for at 'Annullere' og vælg forfra."
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Vælg venligst den korrekte port. For eksempel er navnet for COM1-porten \n"
-"under MS Windows 'ttyS0' under GNU/Linux."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Dette er den vanskeligste beslutning omkring sikkerheden af dit GNU/Linux-\n"
-"system: Du skal indtaste din root-adgangskode. Root er "
-"systemadministratoren\n"
-"og er den eneste der har lov til at lave opdateringer, tilføje brugere,\n"
-"ændre i den overordnede systemkonfiguration og så videre. Kort sagt, root\n"
-"kan gøre alt! Derfor skal du vælge en adgangskode der er svær at gætte -\n"
-"DrakX vil fortælle dig hvis det er for nemt. Som víst kan du vælge ikke at\n"
-"indtaste en adgangskode, men vi advarer dig på det kraftigste mod dette,\n"
-"om ikke andet med én begrundelse: tro ikke at fordi du startede GNU/Linux "
-"op, så er dine andre operativsystemer velforvarede. Da root kan overvinde\n"
-"alle forhindringer og uforvarende slette alle data på partitioner ved\n"
-"sorgløst at behandle partitionerne selv, er det vigtigt at det er\n"
-"vanskeligt at blive root.\n"
-"\n"
-"Adgangskoden bør være en blanding af bogstaver og tal og mindst 8 tegn\n"
-"langt. Skriv aldrig en adgangskode ned for root - det gør det for nemt\n"
-"at bryde ind i et system.\n"
-"\n"
-"Gør dog ikke adgangskoden for lang eller kompliceret da du skal være i "
-"stand\n"
-"til at huske den uden for stort besvær.\n"
-"\n"
-"Adgangskoden vil ikke blive vist på skærmen når du indtaster den.\n"
-"Du skal derfor indtaste adgangskoden to gange, for at begrænse risikoen\n"
-"for tastefejl. Hvis du kommer til at lave den samme tastefejl to gange, vil\n"
-"denne 'ukorrekte' adgangskode være krævet når du forbinder dig til "
-"systemet.\n"
-"\n"
-"I ekspert-tilstand vil du blive spurgt om du vil koble op til en\n"
-"autenticerings-server, som NIS eller NDAP.\n"
-"\n"
-"Hvis dit netværk bruger LDAP (eller NIS)-protokollen til autentificering,\n"
-"vælg da LDAP (eller NIS). Hvis du ikke véd det, så spørg din "
-"systemadministrator.\n"
-"\n"
-"Hvis din maskine ikke er forbundet til noget administreret netværk, ønsker "
-"du\n"
-"nok at vælge Lokale filer for autenticering."
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-"LILO og GRUB er opstartsindlæsere for GNU/Linux. Dette trin er nomalt helt\n"
-"automatiseret. Faktisk vil drakX analysere opstartsektoren på disken og vil\n"
-"handle ud fra dette, afhængig af hvad den finder hér:\n"
-"\n"
-" * Hvis den finder en Windows opstartssektor vil den erstatte den med en\n"
-"GRUB/LILO opstartssektor, så du kan starte GNU/Linux eller Windows;\n"
-"\n"
-" * Hvis den finder en GRUB eller LILO opstartssektor vil den erstatte den\n"
-"med en ny;\n"
-"\n"
-"Hvis den er i tvivl vil drakX vise en dialog med forskellige muligheder.\n"
-"\n"
-" * Opstartsindlæser der bruges: du får her tre muligheder:\n"
-"\n"
-"   * LILO med grafisk menu: hvis du foretrækker LILO med grafikgrænseflade.\n"
-"\n"
-"   * Grub: hvis du foretrækker GRUB (tekstmenu).\n"
-"\n"
-"   * LILO med tekstmenu: hvis du foretrækker LILO med tekstgrænseflade.\n"
-"\n"
-" * opstartsenhed: I de fleste tilfælde vil det ikke være nødvendigt at "
-"ændre\n"
-"standard (/dev/hda), men hvis du foretrækker det, kan opstartsindlæseren\n"
-"installeres på det andet diskdrev (/dev/hdb), eller endda på en diskette\n"
-"(/dev/fd0).\n"
-"\n"
-" * Forsinkelse før opstart af standardsystem: Ved genstart af maskinen er\n"
-"dette den tid der gives til brugeren til at vælge en anden opstartsindgang\n"
-"end standard i opstartsindlæserens menu.\n"
-"\n"
-"Vær opmærksom på at hvis du vælger ikke at installere en opstartsindlæser\n"
-"(ved at vælge Annullér hér), skal du være sikker på at du har en anden måde\n"
-"at starte dit Mandrake Linux-system op på! Vær også sikker på hvad du gør "
-"hvis\n"
-"du ændrer nogen af tilvalgene her!\n"
-"\n"
-"Et klik på Avanceret-knappen i denne dialog vil tilbyde mange avancerede\n"
-"muligheder beregnet til ekspertbrugeren.\n"
-"\n"
-"Mandrake Linux installerer sin egen opstartsindlæser, som vil lade dig\n"
-"opstarte enten GNU/Linux eller ethvert andet operativsystem der er "
-"installeret\n"
-"på din maskine.\n"
-"\n"
-"Hvis der er et andet operativsystem installeret på din maskine, vil det\n"
-"automatisk blive tilføjet til opstartsmenuen. Her kan du vælge at "
-"finindstille\n"
-"de eksisterende muligheder. Et dobbelt-klik på en eksisterende indgang lader "
-"dig\n"
-"ændre dens parametre eller fjerne den; Tilføj opretter en ny indgang; og "
-"Færdig\n"
-"fortsætter til det næste installationstrin."
-
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOaderen) og GRUB er opstartsindlæsere: de kan starte enten\n"
-"GNU/Linux eller ethvert andet system op, som ligger på din maskine.\n"
-"Normalt bliver disse andre operativsystemer fundet korrekt og installeret.\n"
-"Hvis dette ikke er tilfældet, kan du lave en indgang i hånden med denne\n"
-"skærm. Vær omhyggelig med at vælge de korrekte parametre.\n"
-"\n"
-"Måske vil du ikke ønske at give nogensomhelst adgang til disse andre\n"
-"operativsystemer. I dette tilfælde kan du slette de tilsvarende indgange.\n"
-"Men så har du brug for en opstartsdiskette for at starte disse\n"
-"operativsystemer!"
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Det er nødvendigt at du angiver hvor du ønsker at placere oplysningerne\n"
-"krævet for at opstarte GNU/Linux.\n"
-"\n"
-"Med mindre du véd præcist hvad du gør, bør du vælge Første sektor på drevet\n"
-"(MBR)."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Her vælger vi et udskrivningssystem som din maskine skal bruge. Andre\n"
-"styresystemer tilbyder måske ét, men Mandrake tilbyder tre.\n"
-"\n"
-" * 'pdq' - som betyder 'print, don't queue' (udskriv, kø ej), er valget,\n"
-"hvis du har en direkte forbindelse til din printer, og du ønsker at kunne\n"
-"klare printproblemer med det samme, og du ikke har nogen printere via\n"
-"netværk. Det vil kun behandle meget simple netværkstilfælde, og er lidt\n"
-"sløvt på netværk. Vælg 'pdq' hvis dette er din jomfrurejse med GNU/Linux.\n"
-"Du kan ændre dit valg efter installeringen ved at køre PrinterDrake fra\n"
-"Mandrakes Kontrolcenter, og klikke på ekspert-knappen.\n"
-"\n"
-" * 'CUPS' - 'Common Unix Printing System' (Fælles printersystem for Unix)\n"
-"er fremragende til at udskrive på din lokale printer, og også på den,\n"
-"der står på den anden side af jordkloden. Det er simpelt, og kan virke\n"
-"som en server eller klient for det bedagede 'lpd'-printsystem, så det\n"
-"er kompatibelt med de tidligere systemer. Det kan mange finesser, men den\n"
-"basale opsætning er næsten lige så nem som for 'pdq'. Hvis du har brug\n"
-"for at dette efterligner en 'lpd'-server, skal du aktivere\n"
-"'cups-lpd'-dæmonen. Det har grafiske grænseflader for udskrivning og\n"
-"valg af printermuligheder.\n"
-"\n"
-" * 'lprNG' - 'line printer daemon New Generation' (ny generation af\n"
-"linjeskriverdæmonen). Dette system kan gøre omtrent det samme som de\n"
-"andre, men det vil også kunne skrive til et Novell netværk, fordi det\n"
-"understøtter IPX-protokollen, og det kan udskrive direkte til\n"
-"skal-kommandoer. Hvis du har brug for Novell eller udskrivning til\n"
-"kommandoer uden at bruge en separat kanaliserings-konstruktion, så\n"
-"brug lprNG. Ellers er CUPS at foretrække, da det er simplere og bedre\n"
-"til at fungere over netværk."
-
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX er nu ved at bestemme alle IDE-enheder der er tilstede på din "
-"maskine.\n"
-"Den vil også lede efter en eller flere PCI SCSI-kort på dit system.\n"
-"Hvis et SCSI-kort findes, vil DrakX automatisk installere en driver til "
-"det.\n"
-"\n"
-"Da maskineleftersøgningen nogen gange ikke vil finde et stykke udstyr,\n"
-"vil DrakX alligevel spørge dig om du har et SCSI-kort installeret i din\n"
-"maskine. Du vil blive præsenteret for en liste af SCSI-kort, som du kan\n"
-"vælge fra. Svar Nej hvis du ikke har noget SCSI-udstyr.\n"
-"Hvis du ikke er sikker, kan du også tjekke listen over udstyr i din maskine "
-"ved at vælge Se maskinelinfo og klikke O.k.\n"
-"Undersøg listen over udstyr og klik så på O.k.-knappen for at vende tilbage\n"
-"til spørgsmålet om SCSI-udstyr.\n"
-"\n"
-"Hvis du måtte angive din kort manuelt, vil DrakX spørge om du vil\n"
-"specificere nogle indstillingsmuligheder for den. Du bør dog lade DrakX "
-"spørge hardware'en om opsætningen. Det virker som regel fint.\n"
-"\n"
-"Hvis DrakX ikke kan få oplysninger om indstillinger ud af udstyret, som\n"
-"skal bruges til opsætningen, skal du angive opsætningsinformation til "
-"driveren.\n"
-"Se i brugervejledningen (kapitel 3, underafsnit \"Collective informations on "
-"your hardware\")\n"
-"om hjælp med at finde informationen i maskinel-dokumentationen, fra\n"
-"fabrikantens side (hvis du har Internet adgang) eller fra Microsoft Windows\n"
-"(hvis du brugte dette udstyr med Windows på dit system)."
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Du kan tilføje flere valgmuligheder for Yaboot, enten til andre\n"
-"styresystemer, andre kerner, eller til nød-opstart.\n"
-"\n"
-"For andre styresystemer - indtast navn og rodpartition\n"
-"\n"
-"Der er for Linux nogen få valgmuligheder:\n"
-"\n"
-" * Label: dette er simpelthen navnet som du skal indtaste til ledeteksten\n"
-"fra Yaboot for at vælge denne opstartsmulighed.\n"
-"\n"
-" * Image: Dette vil være navnet på den kerne der skal opstartes.\n"
-"Typisk vmlinux eller en variation på vmlinux med en endelse.\n"
-"\n"
-" * Root: root enheden eller \"/\" for din Linux installation.\n"
-"\n"
-" * Append: på Apple udstyr bruges kerne-append muligheden ganske ofte\n"
-"til at hjælpe med initialisering af billedudstyr, eller til at aktivere\n"
-"emulering af museknapper for de ofte manglende knap 2 og knap 3 på musen\n"
-"på en typisk Apple mus. Det følgende er nogle eksempler:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: denne mulighed kan bruges enten til at indlæse de første moduler, "
-"før\n"
-"opstartsenheden er tilgængelig, eller til at indlæse en ramdisk ved opstart\n"
-"i en nødsituation.\n"
-"\n"
-" * Initrd-size: den almindelige størrelse på en ramdisk er generelt 4.096 "
-"bytes.\n"
-"Hvis du har brug for at udlægge en stor ramdisk kan denne mulighed bruges.\n"
-"\n"
-" * Read-write: normalt bliver rod-partitionen først bragt op "
-"skrivebeskyttet\n"
-"for at muliggøre et filsystemstjek før systemet går i luften.\n"
-"Her kan du tilsidesætte denne opsætning.\n"
-"\n"
-" * NoVideo: skulle Apple billedudstyret vise sig at være specielt "
-"problemfyldt\n"
-"kan du vælge denne mulighed for at starte op i 'novideo'-tilstand,\n"
-"med indbygget rammebufferunderstøttelse.\n"
-"\n"
-" * Default: vælger denne indgang som værende det normale Linux valg,\n"
-"som vælges bare ved at trykke RETUR ved yaboots ledetekst. Denne indgang "
-"vil\n"
-"også blive fremhævet med en '*', hvis du trykker Tab for at se "
-"opstartsvalgene."
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot er en systemstarter til NewWorld MacIntosh-maskinel. Den kan\n"
-"starte enten GNU/Linux, MacOS eller MacOSX, hvis de er til stede på din\n"
-"computer. Sædvanligvis vil disse andre styresystemer blive korrekt opdaget\n"
-"og installeret. Hvis dette ikke skulle være tilfældet kan du her tilføje en\n"
-"indgang i hånden. Vær forsigtig med at vælger de korrekte parametre.\n"
-"\n"
-"Yaboots hovedvalg er:\n"
-"\n"
-"  * Init-besked: En enkel tekstbesked som vises før valg af opstart.\n"
-"\n"
-"  * Opstartsenhed: Angiver hvor du ønsker at placere informationen\n"
-"som er nødvendig for at starte GNU/Linux. Du vil generelt have indstillet\n"
-"en bootstrap-partition tidligere til at have denne information.\n"
-"\n"
-"  * Åben firmwareforsinkelse: Til forskel fra LILO er der to forsinkelser\n"
-"mulige med yaboot. Den første forsinkelse bliver målt i sekunder og du\n"
-"kan ved det punkt vælge mellem CD, OF-opstart, MacOS eller Linux.\n"
-"\n"
-"  * Ventetid før kerneopstart: Denne er lig LILO-opstartsforsinkelsen.\n"
-"Efter at have valgt Linux vil du have denne ventetid gange 0,1 sekunder\n"
-"før din forvalgte kernebeskrivelse bliver valgt.\n"
-"\n"
-"  * Aktivér CD-opstart?: Hvis du vælger dette valg vil \n"
-"du kunne trykke 'C' for CD ved det første opstartsvalg.\n"
-"\n"
-"  * Aktiver OF-opstart?: Hvis du vælger dette valg vil du kunne\n"
-"trykke 'N' for Åben Firmware ved det første opstartsvalg.\n"
-"\n"
-"  * Forvalgt styresystem: Du kan vælge hvilket forvalgt styresystem der\n"
-"skal startes når Åben Firmwareforsinkelsen er udløbet."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-"Her præsenteres forskellige parametre relateret til din maskine. Afhængig "
-"af\n"
-"dit installerede maskinel vil - eller vil du ikke - se de følge indgange:\n"
-"\n"
-" * Mus: mus tjek den aktuelle musekonfiguration og klik på knappen for om\n"
-"nødvendigt at ændre den.\n"
-"\n"
-" * Tastatur: tastatur tjek den aktuelle tastaturkonfiguration og klik på\n"
-"knappen for om nødvendigt at ændre den.\n"
-"\n"
-" * Tidszone: tidszone DrakX gætter normalt din tidszone fra det sprog,\n"
-"du har valgt. Men også her, som ved valg af tastatur, er du måske ikke i\n"
-"det land som dit sprog indikerer, så du har måske brug for at klikke på\n"
-"Tidszone-knappen så du kan konfigurere uret svarende til den tidszone\n"
-"du er i.\n"
-"\n"
-" * Printer: Et klik på Ingen printer-knappen vil åbne guiden for\n"
-"printerkonfigurering.\n"
-"\n"
-" * Lydkort: Hvis et lydkort er blevet fundet på dit system, vil det blive\n"
-"vist her. Ingen ændringer er mulige på installationstidspunktet.\n"
-"\n"
-" * Tv-kort: Hvis et tv-kort er blevet fundet på dit system, vil det blive\n"
-"vist her. Ingen ændringer er mulige på installationstidspunktet.\n"
-"\n"
-" * ISDN-kort: Hvis et ISDN-kort er blevet fundet på dit system, vil det "
-"blive\n"
-"vist her. Du kan klikke på knappen for at ændre de tilhørende parametre."
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Vælg det diskdrev som du vil slette for at installere din nye Mandrake "
-"Linux\n"
-"partition. Vær forsigtig, alle data som er på der, vil gå tabt og vil ikke\n"
-"kunne genskabes!"
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klik på O.k. hvis du ønsker at slette alle data og pertitioner der ligger\n"
-"på dette diskdrev. Vær omhyggelig, efter klik på O.k. vil du ikke være\n"
-"i stand til at redde nogen data eller partitioner, der ligger på dette\n"
-"diskdrev, inklusive alle Windows data."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr "Kan ikke få fat i kernemoduler svarende til din kerne (fil %s mangler)"
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Du har valgt følgende tjenere: %s\n"
-"\n"
-"\n"
-"Disse tjenere er aktiveret som standard. De har ingen kendte sikkerheds-\n"
-"problemer, men nogen nye kan blive fundet. I så tilfælde skal du opgradere\n"
-"så snart som mulig.\n"
-"\n"
-"\n"
-"Ønsker du virkelig at installere disse tjenere?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kan ikke bruge rundkastning uden noget NIS-domæne"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Indsæt en tom diskette i diskette-drev %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Denne diskette er ikke formatteret til FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"For at bruge dette gemte pakkevalg, start installationen op med``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fejl ved læsning af filen %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "O.k."
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Noget maskinel på din maskine skal bruge ''proprietære'' drivere for at "
-"virke.\n"
-"Du kan finde information om dem hos: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Du skal have en rod partition. For at få dette, lav en ny partition (eller "
-"vælg en eksisterende).\n"
-"Vælg så kommandoen \"Monterings-sti\" og sæt den til `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Du skal tildele en partition til Swap"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Du har ingen Swap partition\n"
-"\n"
-"Fortsæt alligevel?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Du skal have en FAT-partition monteret under /boot/efi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Brug fri plads"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ikke nok fri plads til at tildele nye partitioner"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Brug eksisterende partition"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Der er ingen eksisterende partition der kan bruges"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Brug Windows partitionen til Loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Hvilken partition vil du benytte som Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Vælg størrelserne"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Rod-partitions størrelse i Mb: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Swap-partitions størrelse i Mb: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Brug den frie plads på Windows-partitionen"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Hvilken partition ønsker du at ændre størrelse på?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Udregner Windows-filsystemets grænser"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Programmet til at ændre størrelse på FAT kan ikke behandle din partition, \n"
-"den følgende fejl opstod: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Din Windows partition er for fragmenteret, kør venligst 'defrag' først"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ADVARSEL!\n"
-"\n"
-"DrakX vil nu ændre størrelsen på din Windows-partition. Udvis\n"
-"forsigtighed: denne operation er farlig. Hvis du ikke allerede har gjort "
-"det, bør du først gå ud af denne installation, \n"
-"køre scandisk under Windows (og eventuelt defrag)  og så genstarte\n"
-"installationen. Du bør også tage en sikkerhedskopi af dine data.\n"
-"Tryk på Ok, hvis du er helt sikker."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Hvilken størrelse ønsker du at at beholde Windows på?"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "partition %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT størrelsesændring mislykkedes: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Der er ingen FAT-partitioner at ændre størrelse på, eller bruge som loopback "
-"(eller ikke nok plads tilbage)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Slet hele disken"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Fjern Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Du har mere end et diskdrev, hvilken ønsker du at installere Linux på?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Alle eksisterende partitioner og deres data vil gå tabt på drev %s"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Brugerdefineret disk-opdeling"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Brug fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Du kan nu partitionere %s.\n"
-"Når du er færdig, så husk at gemme med 'w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Du har ikke nok fri plads på din Windows-partition"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Kan ikke finde plads til installering"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX partitionerings-guiden fandt de følgende løsninger:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partitionering mislykkedes: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Bringer netværket op"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Lukker netværket ned"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Der opstod en fejl, men jeg ved ikke hvordan den kan håndteres på en\n"
-"pæn måde.\n"
-"Fortsæt på eget ansvar!"
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplikér monterings-sti %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Nogle vigtige pakker blev ikke installeret rigtigt.\n"
-"Enten er dit cdrom-drev eller din cdrom fejlbehæftet.\n"
-"Tjek cdrom'en på en færdiginstalleret maskine ved brug af \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Velkommen til %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Intet tilgængeligt diskettedrev"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Går til trin `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Vælg den samlede størrelse som din installation må fylde"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Total størrelse: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Version: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Størrelse: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Vælg pakker som skal installeres"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Info"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Installér"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Installerer"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Vent venligst, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Resterende tid "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Total tid "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Forbereder installationen"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Installerer pakke %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Fortsæt alligevel?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Der opstod en fejl ved sorteringen af pakkerne:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Benyt eksisterende konfiguration for X11?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Dit system har kun få resurser. Du kan få problemer med at installere\n"
-"Mandrake Linux. Hvis dette sker, kan du prøve en tekst-baseret installation "
-"istedet.\n"
-"Dette gøres ved at trykke 'F1' ved opstart fra cdrommen, og så skrive 'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Installationsmetode"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Vælg venligst en af de følgende installations-måder"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Den totale størrelse af de grupper du har valg er cirka %d Mb.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Hvis du ønsker at installere mindre end denne størrelse,\n"
-"så vælg procentdelen af pakker som du vil installere.\n"
-"\n"
-"En lav procentdel vil kun installere de vigtigste pakker;\n"
-"en procentdel på 100%% vil installere alle valgte pakker."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Du har kun plads på din disk til %d%% af disse pakker.\n"
-"\n"
-"Hvis du ønsker at installere mindre end denne størrelse,\n"
-"så vælg procentdelen af pakker som du vil installere.\n"
-"En lav procentdel vil kun installere de vigtigste pakker;\n"
-"en procentdel på %d%% vil installere så mange pakker som muligt."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-"Du har mulighed for at vælge dem mere præcist i næste installationstrin"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procentandel pakker til installation"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Valg af pakkegrupper"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Individuelt pakkevalg"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Total størrelse: %d / %d Mb"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Dårlig pakke"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Navn: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Vigtighed: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Du kan ikke vælge denne pakke, da der ikke er nok plads tilbage til at "
-"installere den"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "De følgende pakker vil blive installeret"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "De følgende pakker vil blive afinstalleret"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Du kan ikke vælge/fravælge denne pakke"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dette er en nødvendig pakke, den kan ikke vælges fra"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Du kan ikke fravælge denne pakke. Den er allerede installeret"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Denne pakke skal opgraderes\n"
-"Er du sikker på at du vil fravælge den?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Du kan ikke fravælge denne pakke. Den skal opgraderes"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Vis automatisk valgte pakker"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Indlæs/gem på diskette"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "Opdaterer pakkevalg"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "Minimal installation"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Beregner"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Vent venligst, forbereder installationen"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d pakker"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Advarsel\n"
-"\n"
-"Læs venligst betingelserne nedenfor omhyggeligt. Hvis du ikke er enig\n"
-"i alt der står, må du ikke installere indholdet af CD´en. Tryk på 'Nægt' \n"
-"for at fortsætte installationen uden disse cdrommer.\n"
-"\n"
-"\n"
-"Visse komponenter på den næste CD er ikke omfattet af GPL licensen eller \n"
-"andre lignende licenser. Hver enkelt komponent er derfor omfattet af \n"
-"de betingelser der er beskrevet i dets egen licens. \n"
-"Læs derfor venligst omhyggeligt betingelserne og følg de opstillede "
-"betingelser\n"
-"når du bruger og/eller videredistribuerer komponenterne.\n"
-"Sådanne licenser forebygger normalt kopiering (sikkerheds-kopiering "
-"undtaget) \n"
-"videredistribuering, at folk skiller programmet ad, eller ændrer i "
-"komponenterne.\n"
-"Ethvert brud på licensen vil øjeblikkeligt fratage dig rettighederne "
-"beskrevet\n"
-"i den specifikke licens. Medmindre licensen giver dig lov hertil, vil det \n"
-"normalt ikke være tilladt at installere programmet på mere end en "
-"computer, \n"
-"eller bruge det på et netværk. Hvis du er i tvivl, så kontakt venligst "
-"producenten\n"
-"af komponenten direkte.\n"
-"Overdragelse til tredjemand eller kopiering af sådanne komponenter "
-"inklusive \n"
-"dokumentationen er normalt forbudt.\n"
-"\n"
-"\n"
-"Alle rettigheder til komponenterne på CD´en tilhører deres respektive "
-"skabere\n"
-"og er beskyttet af Lov om Ophavsret.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Acceptér"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Nægt"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Skift din cdrom!\n"
-"\n"
-"Indsæt cdrom'en med navnet \"%s\" i dit cdrom-drev og tryk på Ok, når det "
-"gjort\n"
-"Hvis du ikke har den så tryk på Annullér, så undgås installation fra denne cd"
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Der opstod en fejl ved installeringen af pakkerne:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Der er opstået en fejl"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Licensaftale"
-
-# Mangler
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduktion\n"
-"\n"
-"Operativsystemet og de forskellige komponenter tilgængelige i Mandrake Linux "
-"distributionen \n"
-"vil herefter blive kaldt \"programmelprodukter\". Programmelprodukterne "
-"inkluderer, men er ikke begrænset til: værktøjssættet, metoder, regler og "
-"dokumentation.\n"
-"\n"
-"\n"
-"1. Licensaftale\n"
-"\n"
-"Læs venligst dette dokument. Dette dokument er en licensaftale mellem dig "
-"og  \n"
-"MandrakeSoft S.A., som gælder til disse programmelprodukter.\n"
-"Ved at installere, kopiere eller bruge disse programmelprodukter accepterer "
-"du indirekte \n"
-"og fuldt ud denne licensaftale med dens betingelser og regler.\n"
-"Hvis du er uenig i nogensomhelst del af denne licens, mister du retten til "
-"at installere, kopiere eller bruge \n"
-"disse programmelprodukter. \n"
-"Hvilket som helst forsøg på at installere, kopiere eller bruge disse "
-"programmelprodukter på en måde som ikke er i overensstemmelse \n"
-"med betingelserne og reglerne i denne licens er ulovlig og vil betyde at du "
-"mister dine rettighedder under denne \n"
-"licens. Hvis dette sker, skal du med det samme ødelægge alle kopier af "
-"disse \n"
-"programmelprodukter.\n"
-"\n"
-"\n"
-"2. Begrænset garanti\n"
-"\n"
-"Disse programmelprodukter og dokumenter leveres \"som de er\", uden nogen "
-"form for garanti \n"
-"efter som hvad lov foreskriver.\n"
-"MandrakeSoft S.A. vil under ingen omstændigheder undtagen hvad lov "
-"foreskriver være ansvarlig for specielle, \n"
-"tilfældige, direkte eller indirekte tab af nogen art (inkluderende uden "
-"begrænsninger, skader ved tab af \n"
-"forretning, forstyrrelser af forretning, finansielle tab, advokatbistand, "
-"erstatninger som resultat af en retssag \n"
-"eller nogen anden form for tab) opstået under brugen af disse "
-"programmelprodukter eller \n"
-"mangel på samme, selv hvis MandrakeSoft S.A. er blevet gjort opmærksom på "
-"mulighed for sådanne \n"
-"skader.\n"
-"\n"
-"BEGRÆNSET GARANTI MED HENSYN TIL REGLER OM BRUG AF FORBUDT PROGRAMMEL I "
-"VISSE LANDE\n"
-"\n"
-"Udover hvad lov foreskriver vil MandrakeSoft S.A. eller deres distributører "
-"under ingen omstændigheder være \n"
-"ansvarlig for tilfældige, direkte eller indirekte tab af nogen art "
-"(inkluderende uden begrænsninger skader ved tab af \n"
-"forretning, forstyrrelser af forretning, finansielle tab, advokatbistand, "
-"erstatninger som resultat af en retssag \n"
-"eller nogen anden form for tab) opstået under hentning eller brugen af dette "
-"programmel fra Mandrake Linux websider\n"
-"som er forbudt i visse lande ved lov.\n"
-"Denne begrænsede garanti gælder, men er ikke begrænset til, de stærke "
-"krypteringskomponenter \n"
-"inkluderet i disse programmelprodukter.\n"
-"\n"
-"\n"
-"3. GPL licensen og relaterede licenser. \n"
-"\n"
-"Dette programmel består af komponenter lavet af forskellige personer.\n"
-"De fleste af disse komponenter bliver reguleret efter vilkårene og aftalerne "
-"i GNU General Public License, herefter kaldet \"GPL\", eller lignende "
-"licenser. De fleste af disse licenser tillader dig at bruge, kopiere, "
-"tilpasse eller redistribuere komponenterne, de dækker. Læs venligst "
-"vilkårene\n"
-"og aftalerne i licensaftalen for hver komponent før du bruger det. Spørgsmål "
-"angående en komponent bedes adresseret til komponentens forfatter og ikke "
-"til MandrakeSoft.\n"
-"Programmerne udviklet af MandrakeSoft S.A. bliver reguleret efter GPL "
-"licensen. Dokumentationen skrævet af MandrakeSoft S.A. bliver reguleret "
-"efter en specifik licens. Referér venligst til dokumentationen for "
-"yderligere detaljer.\n"
-"\n"
-"\n"
-"4. Intellektuelle rettigheder \n"
-"\n"
-"Alle rettigheder til komponenterne i programmelproduktet tilhører deres "
-"respektive forfattere, og er\n"
-"beskyttet af intellektuelle rettigheds- og ophavsretslove, gældende for "
-"programmel.\n"
-"MandrakeSoft S.A. forbeholder sine rettigheder til at ændre eller tilpasse "
-"programmelprodukterne, helt eller delvist, med alle midler og til alle "
-"formål.\n"
-"\"Mandrake\", \"Mandrake Linux\" samt de tilhørende logoer er varemærker for "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Gældende love \n"
-"\n"
-"Hvis dele af denne aftale bliver kendt ugyldig, ulovlig eller ubrugelig ved "
-"en domstolsafgørelse, \n"
-"vil disse dele blive ekskluderet fra denne kontrakt. Du vil forblive bundet "
-"af de andre gældende dele af\n"
-"aftalen.\n"
-"Vilkårene og aftalerne i denne licens er reguleret under fransk lov.\n"
-"Alle uenigheder vedrørende vilkårene i denne licens vil fortrinsvist blive "
-"løst udenfor domstolene. Som en sidste udvej vil uenighederne blive "
-"håndteret ved den rette domstol i Paris, Frankrig.\n"
-"Ved spørgsmål omkring dette dokument, kontakt venligst MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatur"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Vælg venligst tastaturlayout."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Her er den komplette liste over tilgængelige tastaturer"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Hvilken installations-klasse ønsker du?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Installér/Opdatér"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Er dette en nyinstallation eller en opdatering?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Anbefalet"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Opdatering"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Vælg venligst muse-type."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Muse-port"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Vælg venligst hvilken seriel port din mus er forbundet til."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Emulering af knapper"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Emulering af knap 2"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Emulering af knap 3"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurerer PCMCIA kort..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Konfigurerer IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "ingen ledige partitioner"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Skanner partitioner for at finde monteringspunkter"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Vælg monterings-stierne"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Jeg kan ikke læse din partitionstabel, den er for ødelagt for mig :(\n"
-"Jeg kan forsøge fortsat at udblanke dårlige partitioner, ALLE DATA vil gå "
-"tabt\n"
-"Den anden mulighed er at forbyde DrakX at ændre partitionstabellen.\n"
-"(fejlen er %s)\n"
-"\n"
-"Er du indforstået med at ødelægge alle partitionerne?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake kunne ikke læse partitionstabellen korrekt.\n"
-"Fortsæt på eget ansvar!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Det er ikke plads for 1 MB bootstrap! Installationen vil fortsætte, men for "
-"at starte dit system op, skal du lave en bootstrap partition i DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "Ingen rodpartition fundet til opgradering"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Rod-partition"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Hvilken partition indeholder systemets rod-partition (/)?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Du skal genstarte for at aktivere ændringerne i partitionstabellen"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Vælg partitioner der skal formateres"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Led efter beskadigede blokke?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Formaterer partitioner"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Opretter og formaterer fil %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Ikke nok swap-plads til at gennemføre installationen, tilføj mere"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Leder efter tilgængelige pakker"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Leder efter pakker som skal opgraderes"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Dit system har ikke nok plads tilbage til en installation eller opgradering "
-"(%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Alting (%dMb)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%d Mb)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Anbefalet (%d Mb)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Tilpasset"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Venligst vælg indlæs eller gem pakkevalg på diskette.\n"
-"Formatet er det samme som for auto_install-genererede disketter."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Indlæs fra diskette"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Indlæser fra diskette"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Valg af pakker"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "Indsæt en diskette med pakkevalget"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Gem på diskette"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Valgt størrelse er større end tilgængelig plads"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Hvis du har alle cd'erne i listen nedenunder, klik Ok.\n"
-"Hvis du ikke har nogen af disse cd'er, klik Annullér.\n"
-"Hvis kun nogen cd'er mangler, fravælg dem, og klik så Ok."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cdrom med etikette '%s'"
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installerer pakke %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Konfiguration efter installation"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Indsæt opstartsdisketten i diskette-drevet %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Indsæt venligst Opdater moduler-disketten i drev %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Du har nu mulighed for at nedlæse programmel, der bruger kryptering.\n"
-"\n"
-"ADVARSEL:\n"
-"\n"
-"Grundet forskellige krav til programmel der bruger kryptering, og påtvunget\n"
-"af forskellige lokale lovområder, bør kunder og/eller slutbrugere af\n"
-"dette programmel sikre sig at lokale love fra dit/jeres lokalområde\n"
-"tillader dig/jer at nedlæse, gemme og/eller bruge dette programmel.\n"
-"\n"
-"Derudover skal kunder og/eller slutbrugere være opmærksomme på ikke at "
-"bryde\n"
-"lokale love fra dit/jeres lokalområde. Skulle en kunde og/eller slutbruger\n"
-"ikke respektere det lokale områdes love, vil han/de blive udsat\n"
-"for seriøse sanktioner.\n"
-"\n"
-"Under ingen omstændigheder kan Mandrakesoft eller deres producenter\n"
-"og/eller leverandører holdes ansvarlig for speciel, indirekte eller\n"
-"tilfældig skade (inkluderet, men ikke begrænset til tab af overskud,\n"
-"forretningsafbrydelser, tab af kommercielle data og andre pekuniære tab,\n"
-"eventuelle risici og erstatninger der skal betales i overensstemmelse\n"
-"med retlig beslutning) som følge af brug, besiddelse eller nedlæsning af\n"
-"dette programmel, som kunder og/eller slutbrugere kunne få adgang til efter\n"
-"at have accepteret denne aftale.\n"
-"\n"
-"\n"
-"For spørgsmål om denne aftale, vær venlig at kontakte \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Vælg det spejl hvorfra pakkerne skal hentes"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Kontakter spejlet for at hente listen af tilgængelige pakker"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Vælg venligst pakkerne som du vil installere."
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Hvad er din tidszone?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "Maskin-ur sat til GMT"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatisk tidssynkronisering (ved hjælp af NTP)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "NTP-server"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Ekstern CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Ingen printer"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Oversigt"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Mus"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Tidszone"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Printer"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "Internt ISDN-kort"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Lydkort"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV-kort"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Lokale filer"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Sæt root-adgangskode"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Ingen adgangskode"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Dette kodeord er for nemt at gætte (det skal mindst være på %d tegn)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Identifikation"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "Autenticering LDAP"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP grundlæggende dn"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "LDAP-server"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "Autenticering NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS-domæne"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS-server"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"En tilpasset opstartsdiskette lader dig starte Linux systemet op uden at "
-"være\n"
-"afhængig af den normale opstarter. Det kan være nyttigt, hvis du ikke vil\n"
-"installere SILO på dit system - eller hvis et andet operativsystem fjerner "
-"SILO,\n"
-"eller hvis SILO ikke virker med dit maskinel. En tilpasset opstartsdiskette "
-"kan\n"
-"også bruges sammen med Mandrakes `rescue image', hvilket gør det meget\n"
-"nemmere at reparere systemet i tilfælde af systemnedbrud.\n"
-"\n"
-"Hvis du ønsker at lave en opstartsdiskette til dit system, indsæt en\n"
-"diskette i dit første diskettedrev og tryk 'Ok'."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Første diskette-drev"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Andet diskette-drev"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Spring over"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"En tilpasset opstartsdiskette lader dig opstarte Linux systemet uden at "
-"være\n"
-"afhængig af den normale opstarter. Det kan være nyttigt, hvis du ikke vil\n"
-"installere LILO (eller grub) på dit system - eller hvis et andet "
-"operativsystem fjerner LILO,\n"
-"eller hvis LILO ikke virker med din hardware. En tilpasset opstartsdiskette "
-"kan\n"
-"også bruges sammen med Mandrakes `rescue image', hvilket gør det meget\n"
-"nemmere at reparere systemet i tilfælde af systemnedbrud.\n"
-"\n"
-"Vil du lave en opstartsdiskette til dit system?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Der er desværre ikke noget tilgængeligt diskette-drev"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Vælg det diskette-drev, du vil benytte til at lave boot-disketten"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Indsæt en tom diskette i diskette-drevet %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Oprette opstartsdiskette"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Forbereder opstarter"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Det virker som om du har en OldWorld eller ukendt\n"
-"maskine, yaboot opstartsindlæseren vil ikke virke for dig.\n"
-"Installationen vil fortsætte, men du skal\n"
-"bruge BootX for at starte din maskine."
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Ønsker du at bruge aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fejl ved installation af aboot, \n"
-"forsøg at gennemtvinge installation selv om dette kan ødelægge den første "
-"partition?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-msgid "Installing bootloader"
-msgstr "Installerer systemopstarter"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Installation af opstarter mislykkedes. Den følgende fejl opstod:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Du behøver måske at ændre din Åben Firmware opstartsenhed for\n"
-" at slå systemstarteren til. Hvis du ikke ser systemstarter-beskeden\n"
-"ved genstart, så hold Command-Option-O-F nede og indtast:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Skriv så: shut-down\n"
-"Ved næste opstart burde du se systemstarteren."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Lav"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Mellem"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Høj"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Vælg sikkerhedniveau"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Indsæt en tom diskette i drev %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Laver autoinstallations-diskette"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Nogen dele af installationen er ikke færdig\n"
-"\n"
-"Er du sikker på du ønsker du at lukke nu?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Tillykke, installationen er færdig.\n"
-"Fjern boot-mediet og tryk enter for at genstarte.\n"
-"\n"
-"For information om opdateringer til denne udgivelse af Linux-\n"
-"Mandrake, kontakt Errata på http://www.mandrakelinux.com/.\n"
-"\n"
-"Information om konfigurering af systemet kan findes i den\n"
-"Officielle Mandrake Linux Bruger Guide."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Laver autoinstallations-diskette"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Autoinstallation kan ske fuldautomatisk hvis ønsket.\n"
-"I så tilfælde vil den overtage hele harddisken!!\n"
-"(dette er beregnet til at installere på en anden maskine).\n"
-"\n"
-"Du foretrækker måske at afspille installationen igen\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automatisk"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Afspil igen"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Gem pakke-valg"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installation %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> mellem elementer  | <Space> vælger  | <F12> næste skærm "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu mangler"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "Vælg en fil"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Avanceret"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Vent venligst"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Udvid træ"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Sammenfold træ"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Skift mellem flad og gruppesorteret"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Flertydighed (%s), vær mere præcis\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Dårligt valg, prøv igen\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (standard %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Dit valg? (standard %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Dit valg? (standard %s  skriv `none' for ingenting) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Tjekkisk (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Tysk"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Spansk"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Finsk"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Fransk"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norsk"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Polsk"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Russisk"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Svensk"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Britisk"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "Amerikansk"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Albansk"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armensk (gammel)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armensk (skrivemaskine)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armensk (fonetisk)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidiansk (latin)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belgisk"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulgarsk"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiliansk"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Hviderussisk"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Schweizisk (Tysk layout)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Schweizisk (Fransk layout)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Tjekkisk (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Tysk (ingen døde taster)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Dansk"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norsk)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estisk"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgisk (russisk layout)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgisk (Latin layout)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Græsk"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Ungarsk"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Kroatisk"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Israelsk"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Israelsk (Fonetisk)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iransk"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islandsk"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Italiensk"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japansk 106 taster"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Koreansk tastatur"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latinamerikansk"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litauisk AZERTY (gammel)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litauisk AZERTY (ny)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litauisk \"talrække\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litauisk \"fonetisk\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-msgid "Latvian"
-msgstr "Lettisk"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Makedonisk"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Hollandsk"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Polsk (polsk layout)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Polsk (polsk layout)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugisisk"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Canadisk (Québec)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Russisk (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Russisk (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Russisk (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Slovensk"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakisk (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakisk (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "Serbisk (kyrillisk)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Thailandsk"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr "Tajik tastatur"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Tyrkisk (traditionel \"F\" model)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Tyrkisk (moderne \"Q\" model)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukrainsk"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "Amerikansk (internaltionalt)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamesisk \"talrække\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavisk (latinsk)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cirkulære monteringer %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Fjern de logiske delarkiver først\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun-mus"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Standard PS2 mus med hjul"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking-mus"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 knap"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Standard"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Hjul"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "seriel"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Standard 2-knaps mus"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Standard 3-knaps mus"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Serien (seriel)"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Serien"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mus (seriel, gammel C7 type)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "Busmus"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 knapper"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 knapper"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "ingenting"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Ingen mus"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Test venligst musen"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "For at aktivere musen,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "FLYT PÅ HJULET!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Afslut"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Næste ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Forrige"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Er dette korrekt?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Lav forbindelse til Internettet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Den mest almindelige måde at forbinde med ADSL er pppoe.\n"
-"Nogen forbindelser bruger pptp, og nogle få bruger DHCP.\n"
-"Hvis du ikke ved noget, vælg 'brug pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "brug dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "brug pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "brug pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Hvilken DHCP klient ønsker du at bruge?\n"
-"Standard er dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Der blev ikke fundet nogen ethernet netværksadapter på dit system.\n"
-"Kan ikke sætte denne forbindelsetype op."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Vælg netværksgrænsesnit"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Vælg venligst hvilken netværksadapter du ønsker at bruge til at lave "
-"forbindelse til Internettet med."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "kunne ikke finde noget netkort"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Konfigurerer netværk"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Indtast venligst værtsnavn hvis du kender det.\n"
-"Nogle DHCP-servere kræver værtsnavnet for at fungere.\n"
-"Dit værtsnavn bør være et fuldt kvalificeret værtsnavn,\n"
-"fx 'minpc.mitfirma.dk'."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Værtsnavn"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Konfigurér netværk"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Eksternt ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Internt ISDN-kort"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Hvad slags type er din ISDN-forbindelse?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Hvilken ISDN-konfigurering foretrækker du?\n"
-"\n"
-"* Den gamle konfiguration bruger isdn4net. Det har stærke\n"
-"  værktøjer, men det er vanskeligt at konfigurere for en nybegynder,\n"
-"  og er ikke standardbaseret.\n"
-"\n"
-"' Det nye konfigurationsværktøj er enklere at forstå,\n"
-"  mere standardiseret, men med færre værktøjer.\n"
-"\n"
-"Vi anbefaler den nye konfiguration.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Ny konfiguration (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Gammel konfiguration (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN konfiguration"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Vælg din udbyder.\n"
-" Hvis de ikke er i listen, vælg Ikke listet"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "Europaprotokollen"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "Protokol for Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "Protokol for resten af verden"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol for resten af verden \n"
-" ingen D-kanal (lejet linje)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Hvilken protokol ønsker du at bruge?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Hvad slags kort har du?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Det ved jeg ikke"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Hvis du har et ISA kort burde værdiene i næste billede være rigtige.\n"
-"\n"
-"Hvis du har et PCMCIA kort skal du vide irq og io for kortet.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Afbryd"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Fortsæt"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Hvilket er dit ISDN-kort?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Jeg har opdaget et ISDN PCI-kort, men jeg ved ikke hvilken type. Vælg "
-"venligst et PCI-kort i næste skærmbillede."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Ingen ISDN PCI-kort fundet. Vælg venligst ét i næste skærmbillede."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Angiv venligst hvilken seriel port dit modem er forbundet til."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Opkaldsindstillinger"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Navn på forbindelsen"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Telefonnummer"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Login id"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Skript-baseret"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Terminal-baseret"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Domænenavn"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Første DNS-server (valgfri)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Anden DNS-server (valgfri)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan lukke forbindelsen til Internettet eller genkonfigurere din "
-"forbindelse."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan genkonfigurere din forbindelse"
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Du har forbindelse til Internettet nu."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan lave forbindelse til Internettet eller omkonfigurere din forbindelse."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Du er ikke forbundet til Internettet nu."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Lav forbindelse til Internettet"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Luk forbindelse til Internettet"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Konfigurér netværksforbindelse (LAN eller Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Internetforbindelse & -konfiguration"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Vi skal nu konfigurere %s-opkoblingen."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Vi skal nu konfigurere %s opkoblingen.\n"
-"\n"
-"\n"
-"Tryk OK for at begynde."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Konfigurér netværk"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Da du er i gang med en netværksinstallation er dit netværk "
-"alleredekonfigureret.\n"
-"Klik OK for at beholde din konfiguration, eller annullér for at "
-"omkonfigureredin Internet- og netværksforbindelse.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Velkommen til Netværkskonfigurationen\n"
-"\n"
-"Vi skal til at konfigurere din internet- eller netværksforbindelse.\n"
-"Hvis du ikke ønsker at bruge autodetektering så fravælg afkrydsningsboksen\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Vælg profilen der skal konfigureres"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Brug automatisk detektion"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Detekterer enheder..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Normal modemforbindelse"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "Detekteret på port %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN-forbindelse"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "Detekteret %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ADSL opkobling"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "Detekteret på grænseflade %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Kabelforbindelse"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "Kabelopkobling detekteret"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "Lokalnet-konfiguration"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "ethernet-kort detekteret"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Vælg den opkobling, du ønsker at konfigurere"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Du har konfigureret flere måder at koble dig mod internet på.\n"
-"Venligst vælg den du ønsker at bruger.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Internet opkobling"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Ønsker du at starte din forbindelse ved opstart?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Netværks konfiguration"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr "Netværket skal startes op igen"
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Et problem opstod ved genstart af netværket: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Tillykke, netværks- og internetkonfigurationen er færdig.\n"
-"\n"
-"Konfigurationen vil nu blive anvendt på dit system.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Derefter anbefaler vi at du genstarter dit X-miljø for\n"
-"at undgå problemer med det ændrede værtsnavn"
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ADVARSEL: Denne enhed er tidligere blevet konfigureret til at lave "
-"forbindelse til Internettet.\n"
-"Ved kun at trykke på OK beholder du den nuværende konfiguration.\n"
-"Ændringer i felterne nedenunder vil overskrive denne konfiguration."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Indtast IP konfigurationen for denne maskine. Hvert felt skal udfyldes\n"
-"med en IP adresse i `dotted-decimal' notation (for eksempel 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurerer netværksenheden %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (drivprogram %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP-adresse"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Netmaske"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Automatisk IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresse skal have formatet 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Indtast domænenavn, værtsnavn og IP adressen for evt. ekstra navne-servere.\n"
-"Dit værtsnavn skal være et fuldt kvalificeret værtsnavn inklusive domæne,\n"
-"f.eks. minpc.mitfirma.dk. Hvis du ikke har nogen ekstra navne-servere,\n"
-"så lad navne-server-felterne være blanke."
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS-server"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Gateway enhed"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Konfiguration af mellemvært (proxy)"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP-mellemvært"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP-mellemvært"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr "Følg id for netværkskort (nyttigt for bærbare)"
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Proxy skal være http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Proxy skal være ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Internet-konfiguration"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Ønsker du at forsøge at skabe forbindelse til Internettet nu?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Tester din forbindelse..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Systemet er ikke forbundet til Internettet nu."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Af sikkerhedsgrunde vil det blive afbrudt nu."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Det lader ikke til at dit system har forbindelse til Internettet.\n"
-"Prøv at omkonfigurere din forbindelse."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Forbindelses-konfiguration"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Udfyld eller markér venligst feltet nedenunder"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "Kort IRQ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Kort mem (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "Kort IO"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "Kort IO_0"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "Kort IO_1"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Dit personlige telefonnummer"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Navn på udbyder (f.eks. udbyder.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Udbyders telefonnummer"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "Udbyder DNS 1 (valgfri)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "Udbyder DNS 2 (valgfri)"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "Vælg dit land"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Opringningsmåde"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Opkoblingshastighed"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "Opkoblingens tidsudløb (i sekunder)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Konto-login (brugernavn)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Kodeord for konto"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Udvidet partition ikke understøttet på denne platform"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Du har plads tilovers i din partitionstabel, men jeg kan ikke udnytte den.\n"
-"Den eneste løsning er at flytte dine primære partitioner, således at\n"
-"\"hullet\" bliver placeret ved siden af de udvidede partitioner."
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Genskabning fra fil %s mislykkedes: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Fejl i sikkerhedskopien"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fejl ved skrivning til fil %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Noget slemt sker på dit drev. \n"
-"En test for at tjekke integriteten af data er mislykkedes. \n"
-"Dette betyder at alt på disken vil ende som tilfældigt snavs"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "skal have"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "vigtigt"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "meget rart"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "rart"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "måske"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Dæmon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Lokal printer"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Ekstern printer"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "Printer på ekstern CUPS tjener"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "Printer på ekstern lpd tjener"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Netværksprinter (sokkel)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Printer på SMB/Windows 95/98/NT server"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "Printer på en NetWare tjener"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "Indtast en skriverenheds-URI"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "kanalisér opgave ind i kommando"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "Ukendt model"
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr "Rå printer (ingen driver)"
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(på %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "(på denne maskine)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Vælg printer-forbindelse"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hvordan er printeren tilsluttet?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"Med en ekstern CUPS server behøver du ikke at konfigurere\n"
-"nogen printere; printere vil automatisk blive fundet.\n"
-"Vælg venligst \"Ekstern CUPS server\" i dette tilfælde."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Ingenting"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-msgid "Choose a default printer!"
-msgstr "Vælg en forvalgt printer!"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-"Med en ekstern CUPS-tjener behøver du ikke at konfigurere nogen\n"
-"skrivere her; CUPS-tjenere giver din maskine information om \n"
-"skriverne automatisk. Alle skrivere som for øjeblikket er kendt\n"
-"for din maskine vil være under \"Standardskriver\". Vælg standard-\n"
-"skriveren du ønsker, og klik på \"Brug/Læs skriverlisten\"-knappen. \n"
-"Tryk på den samme liste for at opfriske listen. (det kan tage op til 30\n"
-"sekunder fra CUPS starter til alle skrivere er tilgængelige).\n"
-"Når din CUPS-tjener er på et andet netværk skal du opgive\n"
-"CUPS-tjenerens IP-adresse og eventuelle portnummer for at få\n"
-"skriverinformation fra tjeneren, ellers kan du lade disse felter være blanke."
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalt bliver CUPS konfigureret automatisk i overensstemmelse med dit\n"
-"netværksmiljø, så du kan få fat i printerne på CUPS-serverne på dit\n"
-"lokalnetværk. Hvis dette ikke virker ordentligt, så deaktivér\n"
-"'Automatisk CUPS-konfiguration' og redigér din fil\n"
-"/etc/cups/cupsd.conf selv. Glem ikke at genstarte CUPS bagefter.\n"
-"(kommando: 'service cups restart')."
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Luk"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "Brug/Opfrisk skriverliste"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-adressen bør se ud som 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "Port-nummeret bør være et heltal!"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "Standard printer"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "CUPS-serverens IP"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr "Automatisk CUPS-konfiguration"
-
-#: ../../printerdrake.pm_.c:217
-msgid "Detecting devices ..."
-msgstr "Detekterer enheder..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Afprøv porte"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "En printer, model \"%s\" er blevet fundet på "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Lokal Printer"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Hvilken enhed er printeren forbundet til \n"
-"(bemærk at /dev/lp0 er det samme som LPT1:-)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Printer-enhed"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "Enheds/filnavn mangler!"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-msgid "Reading printer database ..."
-msgstr "Læser database over skrivere: ..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Parametre til ekstern lpd"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"For at bruge en ekstern lpd skriverkø, skal du opgive værtsnavnet\n"
-"på skrivertjeneren og kønavnet på den tjener som\n"
-"opgaverne skal placeres i."
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "Eksternt værtsnavn"
-
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "Eksternt printernavn"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "Eksternt værtsnavn mangler"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "Det eksterne værtsnavn mangler!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT)-printer indstillinger"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"For at skrive til en SMB printer, skal du angive navnet på SMB maskinen\n"
-"(bemærk at dette navn kan være forskelligt fra TCP/IP-navnet!) og\n"
-"muligvis IP-adressen på printerserveren. Ydermere skal du angive\n"
-"kønavnet for printeren, brugernavn, adgangskode og information for\n"
-"arbejdsgruppen."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "SMB-servervært"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "SMB-serverens IP"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Dele-navn"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Arbejdsgruppe"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Enten servernavnet eller serverens IP skal angives!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "Samba-delenavn mangler!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "NetWare printer-parametre"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"For at skrive til en NetWare printer skal du angive navnet på NetWare\n"
-"printerserveren (bemærk at dette navn kan være forskelligt fra\n"
-"TCP/IP-navnet!) såvel som kønavnet for den printer du vil benytte\n"
-"og et brugernavn samt en adgangskode."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Printer-server"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Printerkø-navn"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "NCP-servernavn mangler!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "NCP-kønavn mangler!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Sokkel-printer-parametre"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"For at skrive til en sokkel-skriver, skal du angive\n"
-"værtsnavnet på skriveren, og eventuelt portnummer.\n"
-"På en HP JetDirect-tjener er portnummeret normalt\n"
-"9100, på andre tjenere varierer det. Tjek manualen til\n"
-"din tjener."
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "printer-værtsnavn"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "printer-værtsnavn mangler!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Printer-enheds URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Du kan direkte opgive URI til skriveren. URIen skal være i henhold til enten "
-"CUPS- eller Foomatic-standarden. Bemærk at ikke alle typer URIer "
-"understøttes af alle kø-behandlere."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "En korrekt URI skal opgives!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Alle skrivere behøver et navn (f.eks. lp).\n"
-"Beskrivelsen og lokaliseringsfelterne behøver ikke \n"
-"at fyldes ind. De er kommentarer til brugerne."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Navn på printer"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Beskrivelse"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Placering"
-
-#: ../../printerdrake.pm_.c:701
-msgid "Preparing printer database ..."
-msgstr "Forbereder skriverdatabase: ..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "Valg af printermodel"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "Hvilken printermodel har du?"
-
-#: ../../printerdrake.pm_.c:866
-msgid "OKI winprinter configuration"
-msgstr "OKI konfiguration af winprinter"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-"Du konfigurerer en OKI laser-winprinter. Disse printere\n"
-"bruger en meget speciel kommunikationsprotokol og derfor virker\n"
-"de kun når de er forbundet til den første parallelle port. Når\n"
-"din printer er forbundet til en anden port eller til en\n"
-"printserverboks, så forbind venligst printeren til den første\n"
-"parallelle port før du udskriver en prøveside. Ellers vil printeren\n"
-"ikke virke. Din opsætning af forbindelsestype vil blive ignoreret\n"
-"af driveren."
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet konfiguration"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-"Printerdriverne til inkjet som leveres af Lexmark understøtter\n"
-"kun lokale printere, ikke printere på eksterne maskiner eller\n"
-"printserverbokse. Forbind venligst din printer til en lokal port\n"
-"eller konfigurer den på den maskine, den er forbundet til."
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-"For at kunne udskrive på din Lexmark inkjet fra denne\n"
-"konfigurering skal du bruge inkjet printerdriverne\n"
-"leveret af Lexmark (http://www.lexmark.com/). Gå til\n"
-"webstedet i USA og klik på 'Drivers'-knappen. Vælg\n"
-"så din model og derefter 'Linux' som operativsystem.\n"
-"Driverne kommer som RPM-pakker eller skal-skripter\n"
-"med interaktiv grafisk installation. Du behøver ikke\n"
-"lave denne konfiguration via de grafiske grænseflader.\n"
-"Annullér direkte efter licensaftalen. Udskriv derefter\n"
-"justeringsider for skrivehovedet med 'lexmarkmaintain',\n"
-"og justér opsætningen af justeringen af hovedet med dette\n"
-"program."
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"Standardskriverens indstillinger\n"
-"Du bør tjekke at sidestørrelsen og blæktypen\n"
-"er sat rigtigt. Bemærk at en meget god udskriftskvalitet\n"
-"kan gøre udskriften langsommere."
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Valg %s skal være et helt tal!"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Valg %s skal være et tal!"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Valg %s er udenfor område!"
-
-#: ../../printerdrake.pm_.c:1136
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Ønsker du fremover at bruge skriveren \"%s\"\n"
-"som standard?"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "Testsider"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"Venligst vælg testsiderne du ønsker at udskrive.\n"
-"Bemærk: fototestsiden kan tage lang tid at skrive ud,\n"
-"og på laserskrivere med for lidt hukommelse vil den måske ikke\n"
-"skrives ud i det hele taget. Som regel vil det være nok at\n"
-"udskrive standard-testsiden."
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "Ingen testsider"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "Udskriv"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "Standard testside"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr "Alternativ testside (letter)"
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr "Alternativ testside (A4)"
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "Fototestside"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Udskriver testside(r)..."
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testsider er blevet sendt til printeren.\n"
-"Dette kan tage lidt tid før printeren starter.\n"
-"Udskrivningsstatus:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testsider er sendt til printeren.\n"
-"Det kan tage lidt tid før printeren starter.\n"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "Fungerer det korrekt?"
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-msgid "Raw printer"
-msgstr "Rå printer"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"For at skrive en fil fra kommandolinjen (terminalvindoet) ken du enten bruge "
-"programmet '%s <fil>' eller et grafisk printerværktøj: 'xpp <fil>' eller "
-"'qtcups <fil>'. De grafiske værktøjer lader dig vælge printeren og ændre "
-"indstillingerne på en nem måde.\n"
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Disse kommandoer kan du også bruge fra 'udskrivningskommando'-feltet i "
-"udskriftsdialogerne i mange programmer, men lad være med at angive filnavnet "
-"her, fordi filen der skal udskrives leveres af programmet.\n"
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"'%s'-kommandoen tillader også ændring af indstillingsmulighederne for et "
-"bestemt udskriftsjob. Tilføj blot de ønskede indstillinger til "
-"kommandolinjen, fx '%s <fil>\". "
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-"For at få en liste af muligheder tilstede for den aktuelle printer kan du "
-"enten læse listen vist nedefor, eller klikke på knappen 'liste med "
-"printermuligheder'.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
-"kommandoen '%s <fil>'.\n"
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Denne kommando kan du også bruge fra 'udskrivningskommando'-feltet i "
-"udskriftsdialogerne i mange programmer, men lad være med at angive filnavnet "
-"her, fordi filen der skal udskrives leveres af programmet.\n"
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-"For at få en liste af muligheder tilstede for den aktuelle printer kan du "
-"klikke på knappen 'liste med printermuligheder'.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
-"kommandoen '%s <fil>' eller '%s <fil>'.\n"
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Du kan også bruge den grafiske grænseflade 'xpdq' til at sætte "
-"valgmuligheder og behandle udskriftsopgaver.\n"
-"Hvis du bruger KDE som skrivebordsmiljø, har du en 'panik-knap', en ikon på "
-"skrivebordet, benævnt med 'STOP printer!', som stopper alle udskriftsopgaver "
-"øjeblikkeligt når du klikker på den. Dette er fx nyttigt hvis papiret "
-"krøller sammen.\n"
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"'%s'- og '%s'-kommandoerne tillader også ændring af indstillingsmulighederne "
-"for et bestemt udskriftsjob. Tilføj blot de ønskede indstillinger til "
-"kommandolinjen, fx '%s <fil>'.\n"
-
-#: ../../printerdrake.pm_.c:1292
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Udskriver på printeren '%s'"
-
-#: ../../printerdrake.pm_.c:1294
-msgid "Print option list"
-msgstr "Liste med printermuligheder"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "Læser skriverdata: ..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "Overfør skriverkonfiguration"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-"Du kan kopiere skriverkonfigurationen du har sat op for køtjeneren\n"
-"%s til %s, din nuværende køtjener. Al konfigurationsdata (skrivernavn,\n"
-"beskrivelse, opkoblingstype og standardindstillinger) bliver overtaget, "
-"men \n"
-"ikke opgaver.\n"
-"Ikke alle køer kan overføres på grund af:\n"
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-"CUPS understøtter ikke skrivere på Novelltjenere eller skrivere som\n"
-"sender dataene ind i en frit-formet kommando.\n"
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-"PDQ understøtter kun lokale skrivere, eksterne LPD skrivere, og\n"
-"Sokkel/TCP skrivere.\n"
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD og LPRng understøtter ikke IPP skrivere.\n"
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-"Desuden kan køer lavet med dette program\n"
-"eller \"foomatic -configure\" ikke overflyttes."
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-"\n"
-"Skrivere konfigureret med PPD-filerne, som producenten har\n"
-"lavet, eller med CUPS-drivere kan ikke overflyttes."
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Vælg skriverene som du vil overflytte og klik\n"
-"\"Overfør\"."
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "Overfør ikke skrivere"
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "Overfør"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"En skriver med navnet \"%s\" eksisterer allerede på %s. \n"
-"Klik \"Overfør\" for at overskrive.\n"
-"Du kan også give et nyt skrivernavn, eller overspringe denne skriver."
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Navn på printer bør kun indeholde bogstaver, tal og understregen _"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Skriveren \"%s\" eksisterer allerede,\n"
-"ønsker du virkelig at overskrive dens konfiguration?"
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "Nyt skrivernavn"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Overfører %s ..."
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-"Du har overført din tidligere standard-printer '%s',\n"
-"skal den også være standard-printer under det nye\n"
-"printersystem %s?"
-
-#: ../../printerdrake.pm_.c:1423
-msgid "Refreshing printer data ..."
-msgstr "Opfrisker skriverdata ..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr "Konfiguration af en ekstern printer"
-
-#: ../../printerdrake.pm_.c:1432
-msgid "Starting network ..."
-msgstr "Starter netværk ..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-msgid "Configure the network now"
-msgstr "Konfigurér netværket nu"
-
-#: ../../printerdrake.pm_.c:1455
-msgid "Network functionality not configured"
-msgstr "Netværksfunktionalitet ikke konfigureret"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-"Du er ved at konfigurere en ekstern printer. Dette kræver en\n"
-"virkende netværksadgang, men dit netværk er endnu ikke\n"
-"konfigureret. Hvis du vil fortsætte uden en netværkskonfiguration,\n"
-"vil du ikke kunne bruge printeren som du konfigurerer nu.\n"
-"Hvordan ønsker du at fortsætte?"
-
-#: ../../printerdrake.pm_.c:1463
-msgid "Go on without configuring the network"
-msgstr "Fortsæt med konfigurering af netværk"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-"Netværksopsætningen lavet under installationen kan ikke\n"
-"startes nu. Tjek venligst om netværket bliver tilgængeligt\n"
-"efter opstart af dit system, og ret konfigurationen med\n"
-"Mandrake Kontrolcenter, afsnittet 'Netværk og internet'/\n"
-"'Forbindelse', og konfigurér derefter printeren også med\n"
-"Mandrake Kontrolcenter, afsnittet om 'Maskinel'/'Printer'"
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-"Netværksadgangen kørte ikke og kunne ikke startes.\n"
-"Tjek venligst din konfiguration og dit udstyr.\n"
-"Prøv derefter at konfigurere din eksterne printer igen."
-
-#: ../../printerdrake.pm_.c:1516
-msgid "Restarting printing system ..."
-msgstr "Genstarter printsystemet ..."
-
-#: ../../printerdrake.pm_.c:1548
-msgid "high"
-msgstr "høj"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "paranoid"
-msgstr "paranoid"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installerer et printersystem på sikkerhedsniveauet %s"
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-"Du er ved at installere et printsystem %s på\n"
-"et system kørende på sikkerhedsniveau %s.\n"
-"\n"
-"Dette printsystem kører som en dæmon (baggrundsproces)\n"
-"som venter på printeropgaver og behandler dem. Denne dæmon\n"
-"er også tilgængelig for eksterne makskiner via netværket,\n"
-"og derfor er det et muligt angrebspunkt. Derfor bliver\n"
-"kun nogle få udvalgte dæmoner startet op som standard i\n"
-"dette sikkerhedsniveau.\n"
-"\n"
-"Ønsker du virkelig at konfigurere udskrivning på denne maskine?"
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Starting the printing system at boot time"
-msgstr "Starter printsystemet ved opstart"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-"Printsystemet (%s) vil ikke blive startet automatisk, når\n"
-"maskinen startes op.\n"
-"Det er muligt at den automatiske opstart blev slået fra ved\n"
-"ændring til et højere sikkerhedsniveau, fordi printsystemet\n"
-"er et muligt angrebspunkt.\n"
-"\n"
-"Ønsker du at have den automatiske opstart af printsystemet\n"
-"slået til igen?"
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "Tjekker installeret programmel..."
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "Fjerner LPRng..."
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "Fjerner LPD..."
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Vælg skriverkø-behandler"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hvilket printersystem (spooler) ønsker du at bruge?"
-
-#: ../../printerdrake.pm_.c:1759
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigurerer printer '%s'..."
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Printer-muligheder"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr "Forbereder PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "Vil du gerne konfigurere udskrivning?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr "Printsystem: "
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-"De følgende printere er konfigureret.\n"
-"Klik på en af dem for at ændre den, eller\n"
-"for at få information om den, eller klik\n"
-"på 'Tilføj printer' for at tilføje en\n"
-"ny printer."
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Normal modus"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Forvalgt)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Printere på eksterne CUPS tjenere"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-msgid "Printer(s) on remote server(s)"
-msgstr "Printere på eksterne tjenere"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Tilføj printer"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-msgid "Do you want to configure another printer?"
-msgstr "Ønsker du at konfigurere en anden printer?"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "Ændr skriverkonfiguration"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Skriver %s %s %s\n"
-"Hvad ønsker du at forandre på, på denne printer?"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "Gør det!"
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "Skriveropkoblingstype"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "Skrivernavn, beskrivelse, sted"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "Skriverproducent, model, driver"
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "Skriverproducent, model"
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr "Sæt printeren som standard-printer"
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "Udskriver testsider"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr "Véd hvordan der skal udskrives med denne printer"
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "Fjern printer"
-
-#: ../../printerdrake.pm_.c:2071
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Fjerner gammel printer \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Printeren '%s' er nu sat som standard-printer."
-
-#: ../../printerdrake.pm_.c:2103
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ønsker du virkelig at fjerne skriveren \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2105
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Fjerner printer \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Konfiguration af mellemvært (proxy)"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Velkommmen til programmet for proxy-konfigurering.\n"
-"\n"
-"Her vil du kunne opsætte dine http- og ftp-proxyer\n"
-"med eller uden logind og adgangskode\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Udfyld venligst oplysningerne om http-proxy\n"
-"Lad det være blankt hvis du ikke ønsker en http-proxy"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url burde begynde med 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Port-delen bør være numerisk"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Udfyld venligst oplysningerne om ftp-proxy\n"
-"Lad det være blankt hvis du ikke ønsker en ftp-proxy"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url burde begynde med 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Indtast venligst logind og adgangskode for proxy, hvis nødvendigt.\n"
-"Lad det være blankt hvis du ikke ønsker logind/adgangskode"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "adgangskode"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "genindtast adgangskode"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Adgangskoderne stemmer ikke overens. Prøv igen!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan ikke tilføje en partition til _formatéret_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Kan ikke skrive filen %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid fejlede"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid fejlede (måske mangler raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ikke nok partitioner til at benytte RAID level %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Start ALSA (Advanced Linux Sound Architecture) lydsystemet"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron en periodisk kommando planlægger"
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd bruges til at overvåge batteristatus og skrive log til syslog.\n"
-"Den kan også bruges til at lukke maskinen når batteriet er på lav."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Kører planlagte kommandoer med 'at' kommandoen på tiden specificeret da\n"
-"'at' blev kørt, og kører batch kommandoer når den gennemsnitlige\n"
-"systembelastning er lav nok"
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron er et standard UNIX program der kører bruger-specifikke programmer\n"
-"på planlagte tidspunkter. Vixie cron tilføjer en del forbedringer til\n"
-"den basale UNIX cron, inklusive bedre sikkerhed og stærkere "
-"konfigurationsmuligheder."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM tilføjer muse-support til tekst-baserede Linux applikationer\n"
-"såsom Midnight Commander. Den tillader muse-baseret kopiér-og-sætind "
-"operationer på konsollen\n"
-"og inkluderer support for pop-op-menuer i konsollen."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake kører en søgning efter maskinel, og kan konfigurere nyt/ændret\n"
-"maskinel."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache er en webserver.  Den bruges til at betjene HTML-filer\n"
-"og CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver-dæmonen (kaldet inetd) starter forskellige\n"
-"internet-tjenester efter behov. Den er ansvarlig for at starte tjenester "
-"som\n"
-"telnet, ftp, rsh og rlogin. Hvis inetd deaktiveres, deaktiveres alle de "
-"tjenester,\n"
-"den er ansvarlig for."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Start pakkefiltrering for Linux kerne 2.2 serien for at opsætte\n"
-"en brandmur til at beskytte din maskine mod netværksangreb."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Denne pakke indlæser den valgte tastatur-tabel,\n"
-"som valgt i /etc/sysconfig/keyboard. Dette kan vælges i kbdconfig "
-"programmet.\n"
-"Dette bør være slået til på de fleste maskiner."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatisk regenerering af kernehoved i /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "automatisk opdagelse og konfigurering af maskinel ved opstart."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf vil nogen gange arrangere udførelse af forskellige\n"
-"opgaver ved opstart for at vedligeholde systemkonfigurationen."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd er printer-dæmonen som er nødvendig for at lpr virker´.\n"
-"Den er basalt en server der håndterer udskrifts-opgaver."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtuel Server, brugt til at bygge en tjener med høj ydelse og\n"
-"tilgængelighed."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) er en domæne-navneserver (DNS) der bruges til\n"
-"opslag af navne til IP-adresser."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monterer og afmonterer alle netværks filsystemer (NFS),\n"
-"SMB (LanManager/Windows) og NCP (NetWare) monterings-stier"
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiverer/deaktiverer alle netværks-kort som er konfigureret\n"
-"til at starte ved opstart"
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS er en populær protokol til fildeling over TCP/IP netværk.\n"
-"Denne tjeneste giver NFS-serverfunktionalitet, som konfigureres gennem\n"
-"/etc/exports filen"
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS er en populær protokol til fildeling over TCP/IP\n"
-"netværk. Denne service giver NFS fillåsnings funktionalitet"
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Aktiverer automatisk numlock-tast i konsol og XFree ved\n"
-"opstart."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Støtter OKI 4w og kompatible winskrivere."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA understøttelse er normalt til at understøtte ting som\n"
-"ethernet og modemer på bærbare.  Den vil ikke blive startet medmindre den "
-"er\n"
-"konfigureret, så det er sikkert at have den installeret på maskiner der "
-"ikke\n"
-"har behov for den."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper håndterer RPC tilslutninger, som bliver brugt af\n"
-"protokoller som NFS og NIS. Portmap serveren skal køre på maskiner som\n"
-"bruger protokoller der udnytter RPC mekanismen"
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix er en transport-agent for post, som bruges af programmer der\n"
-"flytter post fra en maskine til en anden."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Gemmer og henter system entropi pøl for en højre kvalitet\n"
-"på generering af tilfældige tal."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Tilordn rå enheder til blokenheder (som harddisk-\n"
-"partitioner) til brug af applikationer som Oracle"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed dæmonen giver mulighed for automatisk IP rutetabel opdatering\n"
-"via RIP protokollen. RIP kan bruges til små netværk, men når det kommer til\n"
-"mere komplekse netværk er der behov for en mere kompleks protokol."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokollen tillader brugere på et netværk at\n"
-"hente systeminformation fra enhver maskine på dette netværk."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokollen tillader brugere på et netværk at identificere\n"
-"hvem der er logget på andre maskiner"
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokollen tillader eksterne brugere at hente en liste over alle\n"
-"brugere der er logget ind på en maskine, der kører rwho dæmonen (minder om "
-"finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Start lydsystemet på din maskine"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog er en facilitet som mange dæmoner bruger til log beskeder\n"
-"Det er en god idé altid at køre syslog"
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Indlæs driverne for dine usb-enheder."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Starter X-font tjeneren (dette er obligatorisk for at XFree skal køre)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Vælg hvilke tjenester der skal startes automatisk ved opstart"
-
-#: ../../services.pm_.c:126
-msgid "Printing"
-msgstr "Udskriver"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr "Fildeling"
-
-#: ../../services.pm_.c:132
-msgid "System"
-msgstr "System"
-
-#: ../../services.pm_.c:137
-msgid "Remote Administration"
-msgstr "Ekstern administration"
-
-#: ../../services.pm_.c:145
-msgid "Database Server"
-msgstr "Databaseserver"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Tjenester: %d aktiverede for %d registrerede"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Tjenester"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "kører"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "stoppet"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Tjenester og dæmoner"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Beklager, der er ingen ekstra\n"
-"information om denne tjeneste."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ved opstart"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Installerer pakker..."
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Jeg kan ikke læse din partitionstabel, den er for ødelagt :(\n"
-"Jeg vil forsøge mig med at slette de beskadigede partitioner"
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "Fejl!"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Jeg kan ikke finde filen '%s' som jeg behøver."
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "Autoinstallationskonfigurering"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Du er ved at konfigurere en automatisk installationsdiskette. Denne mulighed "
-"er lidt farlig, og må bruges med forsigtighed.\n"
-"\n"
-"Med denne mulighed vil du igen kunne køre installationen du gennemførte på "
-"denne maskine, med muligheden for at selv kunne ændre på nogen af "
-"indstillingerne.\n"
-"\n"
-"For maksimal sikkerhed vil partitioneringen og formateringen aldrig blive "
-"gennemført automatisk, uanset hvad du valgte under installationen.\n"
-"\n"
-"Ønsker du at fortsætte?"
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "Konfiguration af automatiske skridt"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Venligst vælg for hvert skridt om det skal være som under installationen, "
-"eller manuelt"
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Tillykke!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketten er blevet genereret.\n"
-"Du kan nu gennemføre installationen igen."
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Deling af internetforbindelse"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Deling af internetforbindelse er slået til"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Indstilling af deling af internetforbindelse er allerede gjort.\n"
-"Deling er aktiveret.\n"
-"\n"
-"Hvad ønsker du at gøre?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "de-aktivér"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "træd af"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "genkonfigurér"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Slår servere fra..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Deling af internetforbindelse er nu slået fra"
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Deling af internetforbindelse er slået fra"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Indstilling af deling af internetforbindelse er allerede gjort.\n"
-"Den er de-aktiveret for nærværende\n"
-"Hvad ønsker du at gøre?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "aktivér"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Aktiverer servere..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Deling af internetforbindelse er nu slået til"
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Du er ved at konfigurere din maskine til at dele sin internetforbindelse.\n"
-"Med denne mulighed vil andre maskiner på dit lokale netværk kunne bruge "
-"internetforbindelsen på denne maskine.\n"
-"\n"
-"Bemærk: du skal bruge en dediceret netværksadapter, for at lave et lokalt "
-"netværk (LAN)."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Grænseflade %s (benytter modul %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Grænseflade %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Ikke nogen netværksadapter i dit system!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ingen ethernet netværksadapter er blevet fundet på dit system. Kør venligst "
-"værktøjet til maskinel konfiguration."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Netværksgrænsesnit"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Der er kun én konfigureret netværksadapter i dit system:\n"
-"\n"
-"%s\n"
-"\n"
-"Jeg skal til at sætte dit lokalnet på med den adapter."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Vælg venligst hvilken netværksadapter som skal forbindestil dit lokalnet."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Advarsel, netværksadapteren er allerede konfigureret. Jeg vil omkonfigurere "
-"den."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Mulig LAN-adresse konflikt fundet i konfigurationen til %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Brandmurkonfiguration genkendt!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Advarsel! En eksisterende brandmurkonfiguration er blevet fundet. Du skal "
-"muligvis lave manuelle rettelser efter installationen."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Konfigurerer..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Konfigurerer skript, installerer programmel, starter servere..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemer med installation af %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Alt er blevet konfigureret.\n"
-"Du kan nu dele din internetforbindelse med andre maskiner på dit lokale "
-"netværk, ved at bruge DHCP."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Indstilling er allerede gjort. men er de-aktiveret for nærværende."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Indstilling er allerede gjort. og er for nærværende aktiv."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Deling af Internetforbindelse har aldrig været konfigureret."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Konfiguration af deling af internetforbindelse"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Velkommen til værktøjet til deling af internetforbindelse!\n"
-"%s\n"
-"\n"
-"Klik på Konfigurér for at starte programmet til at dele din "
-"internetforbindelse!"
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netværkskonfiguration (%d adaptorer)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Slet profil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Profil der skal slettes:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Ny profil..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Navnet på profilen der skal oprettes (den nye profil oprettes som en \n"
-"kopi af den nuværende) :"
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Værtsnavn: "
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Internetadgang"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Type:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Grænseflade:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Tilsluttet"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Ikke tilsluttet"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Tilslut..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Afbrud..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Starter din forbindelse..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Lukker din forbindelse..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Forbindelsen er ikke lukket.\n"
-"Prøv at gøre det manuelt ved at køre\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"i roden (som root)"
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Systemet er nu afbrudt."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Konfigurér Internetadgang..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "LAN konfiguration"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Drivprogram"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Grænseflade"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Konfigurér lokalnetværk..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr "Klik her for at starte vejlederen ->"
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Anvend"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Vent venligst... Sætter konfigurationen i anvendelse"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen konfigurerede grænsesnit.\n"
-"Konfigurer disse først ved at klikke på 'Konfigurér'"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "LAN konfiguration"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Opstartsprotokol"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Startede med opstart"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP-klient"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "aktivér nu"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "deaktivér nu"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen internet-opkobling.\n"
-"Opret én først ved at klikke på 'Konfigurér'"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Konfiguration af Internetforbindelse"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Konfiguration af Internetforbindelse"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Type af forbindelse"
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parametre"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Ethernet-kort"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP-Klient"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Velkommen til Crackere"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Ringe"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoid"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Dette niveau skal bruges med omtanke. Det gør dit system nemmere at bruge,\n"
-"men er meget sårbart: det må ikke bruges til en maskine der er i et netværk\n"
-"eller har forbindelse til Internettet. Der er ikke nogen kontrol af "
-"adgangskoder."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Kontrol af adgangskode er nu aktiveret, men brug som netværksmaskine er\n"
-"stadig ikke anbefalet."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Ikke mange forbedringer af sikkerheds-niveauet, den vigtigste er at der er\n"
-"flere sikkerheds-advarsler og eftersyn."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Dette er standard sikkerheds-anbefalingen for en maskine med\n"
-"forbindelse til Internettet. Der er nu sikkerheds-eftersyn."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Med dette sikkerhedsniveau, kan brug som server blive muligt\n"
-"Sikkerheden er nu høj nok til at systemet kan bruges som server\n"
-"som tillader forbindelser fra mange klienter."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Dette svarer til niveau 4 med ekstra sikkerhed, systemet er nu helt lukket.\n"
-"Sikkerheden er nu på højeste niveau."
-
-#: ../../standalone/draksec_.c:65
-msgid "Security level"
-msgstr "Sikkerhedsniveau"
-
-#: ../../standalone/draksec_.c:67
-msgid "Use libsafe for servers"
-msgstr "Brug libsafe for servere"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Et bibliotek som beskytter mod angreb via bufferoverløb og formatstrenge."
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Indstiller sikkerhedsniveau"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrolcenter"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Vælg det værktøj du ønsker at benytte"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "brug: keyboarddrake [--expert] [tastatur]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Vil du have at Bak-tasten giver Delete i konsollen?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Skift cdrom"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Indsæt venligst installations-cdrom'en i dit cdrom-drev og tryk på Ok, når "
-"det gjort\n"
-"Hvis du ikke har den - tryk på Annullér, så undgås levende opgradering"
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kan ikke starte levende opgradering !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "ingen seriel_usb fundet\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Emulering af tredje knap?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Brandmurkonfiguration"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Brandmurkonfiguration"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Brandmure\n"
-"\n"
-"Du har allerede indstillet en brandmur.\n"
-"Klik på Konfigurér for at ændre eller fjerne brandmuren"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Brandmure\n"
-"\n"
-"Klik på Konfigurér for at sætte en standard-brandmur op"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Vælg sprog"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Vælg installations-metode"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Harddisk bestemmelse"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfigurér mus"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Vælg tastatur"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sikkerhed"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Vælg filsystemer"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatér partitioner"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Vælg pakker til installation"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installér system"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Tilføj bruger"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfigurér netværk"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfigurér tjenester"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Opret opstartsdiskette"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Installér systemopstarter"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfigurér X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Afslut installation"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall-konfigurator\n"
-"\n"
-"Dette konfigurerer en personlig brandmur for denne Mandrake Linux maskine.\n"
-"For en kraftfuld dedikeret brandmurs-løsning se venligst denspecialiserede "
-"MandrakeSecurity Firewall-distribution."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Vi vil nu spørge dig om hvilke tjenester du gerne vil tillade\n"
-"internettet at forbinde til.  Tænk grundigt over disse\n"
-"spørgsmål, da din maskines sikkerhed er vigtig.\n"
-"\n"
-"Hvis du ikke bruger nogle af disse tjenester så skærm dem af\n"
-"med brandmuren.  Du kan altid ændre indstillingerne når du vil\n"
-"ved at køre dette program igen!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Kører du en webserver på denne maskine som du har brug for at hele\n"
-"internettet kan se? Hvis du kører en webserver som kun behøver at blive\n"
-"tilgået af denne maskine kan du roligt svare NEJ her.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Kører du en DNS-navneserver på denne maskine? Hvis du ikke har sat\n"
-"en op til at give IP- og zone-information til hele internettet kan du svare\n"
-"nej her.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Ønsker du at tillade indgående Secure Shell ssh-forbindelser?\n"
-"Det er en erstatning for telnet som du måske vil bruge til at logge ind.\n"
-"Hvis du bruger telnet nu bør du afgjort skifte til ssh. telnet er ikke\n"
-"krypteret - så nogle angribere kan stjæle din adgangskode hvis du bruger\n"
-"den. ssh er krypteret og tillader ikke den slags aflytning."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Vil du tillade indgående telnet-forbindelser?\n"
-"Dette er virkeligt usikkert som vi har forklaret i det foregående billede. "
-"Vi\n"
-"anbefaler stærkt at du svarer NEJ her og bruger ssh i stedet for telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Kører du en FTP-tjeneste på denne maskine som du har brug for at hele\n"
-"internettet har adgang til? Hvis du har så anbefaler vi stærkt at du kun\n"
-"bruger den til anonyme overførsler. En hvilkensomhelst adgangskode sendt\n"
-"over FTP kan stjæles af visse angribere, siden FTP heller ikke bruger\n"
-"kryptering til at overføre adgangskoder.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Kører du en post-server her? Hvis du sender beskeder med\n"
-"pine, mutt eller en anden tekstbaseret post-klient er det sandsynligt.\n"
-"Ellers bør du skærme den væk.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Kører du en POP- eller IMAP-tjeneste her? Dette kan bruges til at betjene "
-"ikke-webbaserede postkonti for folk via denne maskine.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Du ser ud til at køre en 2.2-kerne. Hvis din IP-netværksadresse\n"
-"bliver sat automatisk af en maskine i dit hjem eller kontor\n"
-"(dynamisk tildelt) bør vi tillade dette. Er dette tilfældet?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Får din maskine tiden synkroniseret efter en anden maskine?\n"
-"Oftest er dette brugt af større Unix/Linux-organisationer for at\n"
-"synkronisere tiden for logning og lignende. Hvis du ikke er en del\n"
-"af et større kontor og ikke har hørt om dette er det sandsynligvis\n"
-"ikke tilfældet."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurationen er færdig. Skal vi skrive disse ændringer til disken?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Kan ikke åbne %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Kan ikke åbne %s for skrivning: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Netværksmaskine (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-vært, SMB-vært, mellemvært (proxy), SSH-vært"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kontor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome-arbejdsstation"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Værktøjer til Palm Pilot og Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Arbejdsstation"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Brandmur/router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Tjener for domænenavn og netværksinformation"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kontor-programmer: Tekstbehandler (kword, abiword), regneark (kspread, "
-"gnumeric), pdf-visere, o.lign."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Lyd-relaterede værktøjer: mp3 eller midi-afspillere, mixere o.lign."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Bøger og vejledninger om Linux og Frit Programmel"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE-arbejdsstation"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedie - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Samling af værktøjer til post, nyheder, filoverførsel og chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Database"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL eller MySQL database-tjener"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Værktøjer til at lette indstillingen af din maskine"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedie - Lyd"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Værktøjer"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentation"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsolværktøjer"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix posttjener, Inn nyhedstjener"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet-station"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedie-station"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfiguration"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Flere grafiske miljøer (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop -miljøet, det grundlæggende grafiske miljø, med en vifte af "
-"supplerende værktøjer."
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafisk miljø"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Udvikling"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache og Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Værktøjer til at skabe og brænde CD´er"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kontor-arbejdsstation"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, o.lign."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafiske programmer som fx The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C og C++ udviklingsbiblioteker, programmer, og include-filer."
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Netværksmaskine server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Post/diskussionsgrupper"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Spillemaskine"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videoafspillere og redigeringsværktøjer"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedie - Grafik"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Underholdnings-programmer: arkade, bræt, strategi, osv."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Værktøjssæt til at læse samt sende post og nyheder (pine, mutt, tin..) , og "
-"til at browse på nettet"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arkivering, emulering, overvågning"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Personlig økonomi"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Et grafisk miljø med brugervenlig samling af programmer og værktøjer"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienter for forskellige protokoller inklusiv ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internetadgang"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Lyd- og video-afspillere og redigeringsværktøjer"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Andre grafiske miljøer"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Redigeringsværktøjer, skaller, filværktøjer, terminaler"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programmer til at håndtere din økonomi, som fx gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Spil"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Personlig informationshåndtering"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedie - CD-brænding"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Videnskabelig arbejdsstation"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "kan ikke læse /etc/sysconfig/autologin: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Ønsker du at genstarte netværket"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Er du enig?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Jeg er ved at genstarte netværksenheden:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Jeg er ved at genstarte netværksenheden %s. Er du enig?"
-
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Med mindre du bestemt véd noget andet, er det normale valg /dev/hda\n"
-#~ "(første master IDE disk) eller /dev/sda (første SCSI disk)."
-
-#~ msgid ""
-#~ "The printing system which you are going to use (%s) needs basic \n"
-#~ "network functionality, but your network functionality is not\n"
-#~ "configured yet. If you go on without network configuration, your\n"
-#~ "printing system will set up a network only consisting of the \n"
-#~ "local machine which does not allow the usage of remote printers\n"
-#~ "or the sharing of a local printer with remote clients, but you\n"
-#~ "can set up local printers usable from your local machine. How do\n"
-#~ " you want to proceed?"
-#~ msgstr ""
-#~ "Printersystemet som du skal bruge (%s) behøver basal\n"
-#~ "netværksfunktionalitet, men din netværksfunktionalitet er ikke\n"
-#~ "konfigureret endnu. Hvis du vil fortsætte uden en netværkskonfiguration,\n"
-#~ "vil dit printsystem opsætte et netværk der kun består af den\n"
-#~ "lokale maskine; hvilket ikke tillader brug af eksterne printere, eller\n"
-#~ "deling af en lokal printer med eksterne klienter, men du kan\n"
-#~ "opsætte lokale printere der kan bruges fra din lokale maskine.\n"
-#~ "Hvordan ønsker du at fortsætte?"
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "De følgende printkøer er konfigurerede.\n"
-#~ "Du kan tilføje flere eller ændre de eksisterende."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Opkoblingstidsudløb (i sekunder) [beta, endnu ikke implementeret ]"
-
-#~ msgid ""
-#~ "The Mandrake Linux spreads among several CDROMs. It may be that drakX "
-#~ "has\n"
-#~ "selected packages on another CDROM than the installation CDROM, and when "
-#~ "it\n"
-#~ "needs that you put another one into the drive, it will eject the current "
-#~ "CDROM\n"
-#~ "and ask you for another one."
-#~ msgstr ""
-#~ "Mandrake Linux er fordelt på flere cdrom-er. Muligvis har drakX valgt \n"
-#~ "pakker på en anden cdrom end installations-cdrommen, og når den har "
-#~ "brug \n"
-#~ "for at du sætter en anden cdrom i drevet, vil den udskyde den aktuelle "
-#~ "cdrom \n"
-#~ "og bede dig om en anden."
-
-#~ msgid ""
-#~ "drakX just skips this test unless you purposely click on the "
-#~ "corresponding step\n"
-#~ "on the left. By default, drakX sees your mouse as a two-button mouse and\n"
-#~ "emulates the third button, and knows whether it's PS/2, serial or USB.\n"
-#~ "\n"
-#~ "Perhaps this is not what you want. In that case, you just have to select "
-#~ "the\n"
-#~ "right type for your mouse in the list which appears.\n"
-#~ "\n"
-#~ "You can now test your mouse. Use buttons and wheel to verify if settings "
-#~ "are\n"
-#~ "good. If not, you can click on \"Cancel\" to choose another driver."
-#~ msgstr ""
-#~ "drakX overspringer blot denne test medmindre du med vilje klikker på "
-#~ "det \n"
-#~ "tilsvarende trin til venstre. Normalt ser drakX din mus som en to-"
-#~ "knapsmus og \n"
-#~ "emulerer den tredje knap, og den véd om den er PS/2, seriel eller USB.\n"
-#~ "\n"
-#~ "Måske er dette ikke hvad du vil ønsker. I så fald behøver du blot at "
-#~ "vælge \n"
-#~ "den rigtige type mus fra den viste liste.\n"
-#~ "\n"
-#~ "Du kan nu afprøve din mus. Brug knapper og hjul for at efterprøve om \n"
-#~ "indstillingerne er gode. Hvis ikke, kan du klikke på 'annullér' for at "
-#~ "vælge \n"
-#~ "en anden driver."
-
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Kunne ikke sætte '%s' til standard-printer!"
-
-#~ msgid "Spooler: "
-#~ msgstr "Skriverkø-behandler: "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Test musen her."
-
-#~ msgid "Press next to continue."
-#~ msgstr "Tryk næste for at fortsætte."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Du kan nu teste din mus. Brug knapperne og hjulet for sikre\n"
-#~ "dig at det virker. Hvis ikke, så klik på \"Annullér\" og vælg en anden\n"
-#~ "driver."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (eller ADSL) forbindelse"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Du kan direkte angive URI-en til at tilgå printeren via CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Ja, udskriv ASCII-testside"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Ja, udskriv PostScript-testside"
-
-#~ msgid "Yes, print both test pages"
-#~ msgstr "Ja, udskriv begge testsider"
-
-#~ msgid "Paper Size"
-#~ msgstr "Papirstørrelse"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Skift side efter opgave?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Valgmuligheder for Uniprint driver"
-
-#~ msgid "Color depth options"
-#~ msgstr "Valgmuligheder for farvedybde"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Udskriv tekst som PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Ordn trappetrins-tekst?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Antal sider per udskriftsside"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Højre/venstre margener i punkter (1/72 tomme)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Top/bund margener i punkter (1/72 tomme)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Ekstra valgmuligheder til GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Ekstra valgmuligheder til tekst"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Omvendt sideorden"
-
-#~ msgid "CUPS starting"
-#~ msgstr "CUPS starter"
-
-#~ msgid "Reading CUPS drivers database..."
-#~ msgstr "Læser CUPS driver database..."
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Vælg fjernprinter-forbindelse"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected.\n"
-#~ "In case of doubt, select \"Remote CUPS server\"."
-#~ msgstr ""
-#~ "Med en fjern CUPS server behøver du ikke at konfigurere\n"
-#~ "nogen printere; printere vil automatisk blive fundet.\n"
-#~ "Hvis du er i tvivl, så vælg \"Fjern CUPS server\"."
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Hver printer behøver et navn (fx lp)\n"
-#~ "Andre parametre såsom beskrivelse af printeren eller dens placering\n"
-#~ "kan defineres. Hvilket navn skal bruges for denne printer, og hvordan\n"
-#~ "er printeren forbundet?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Alle printkøer (som bruges til en print-opgave) behøver et\n"
-#~ "navn (ofte lp) og et mellemlagringskatalog knyttet til det. Hvilket\n"
-#~ "navn og katalog skal bruges til denne kø, og hvordan er køen forbundet?"
-
-#~ msgid "Name of queue"
-#~ msgstr "kønavn"
-
-#~ msgid "Spool directory"
-#~ msgstr "Mellemlagrings-katalog"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Udbyder DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Udbyder DNS 2"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "For at få et mere sikkert system, bør du vælge \"Benyt skygge-fil\" og\n"
-#~ "\"Benyt MD5-adgangkoder\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Hvis dit netværk benytter NIS, vælg \"Benyt NIS\". Hvis du ikke ved det,\n"
-#~ "kan du spørge din netværksadministrator."
-
-#~ msgid "yellow pages"
-#~ msgstr "gule sider"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Hvordan vil du lave forbindelse til Internettet?"
-
-#~ msgid "cannot fork: "
-#~ msgstr "kan ikke dele: "
-
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "LAN konfiguration"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Valgt størrelse %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Åbner din forbindelse..."
-
-#~ msgid "Configure..."
-#~ msgstr "Konfigurér..."
-
-#~ msgid "Standard tools"
-#~ msgstr "Standardværktøjer"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Denne opstartsfil prøver at indlæse modulet til din USB-mus"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Konfiguration af opstartsudseende"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Nu da din internetforbindelse er konfigureret,\n"
-#~ "kan din maskine blive konfigureret til at dele sin internetforbindelse.\n"
-#~ "Info: Du skal bruge en ekstra netværks adapter for at sætte et lokalnet "
-#~ "op (LAN).\n"
-#~ "\n"
-#~ "Ønsker du at opsætte deling af internetforbindelsen?\n"
-
-#~ msgid "Welcome to the Internet Connection Sharing utility!"
-#~ msgstr "Deling af internetforbindelse"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Automatiske afhængigheder"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Konfigurér X"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Opret opstartsdiskette"
-
-#~ msgid "Format floppy"
-#~ msgstr "Formatér diskette"
-
-#~ msgid "Choice"
-#~ msgstr "Valg"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "horisontal og fin aurora"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "vertikal og traditionel aurora"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Du kan nu vælge nogen forskellige muligheder for dit system.\n"
-#~ "\n"
-#~ "* Brug harddisk-optimering: Denne mulighed kan forbedre disk-ydelsen, men "
-#~ "er kun for erfarne brugere: nogen ustabile\n"
-#~ "  chip-sæt kan ødelægge dine data, så vær forsigtig. Bemærk at kernen har "
-#~ "en indbygget sortliste over diske og chip-sæt,\n"
-#~ "  men hvis du vil undgå slemme overraskelser, så lad denne mulighed være "
-#~ "slået fra.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Vælg sikkerhedsniveau: Du kan vælge et sikkerhedsniveau for dit system. "
-#~ "Se i manualen for mere information. \n"
-#~ "  Basis: hvis du ikke véd hvad du skal vælge, så brug standard valg.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Præcisér RAM-størrelse om nødvendigt: desværre er der ingen "
-#~ "standardmetode for at spørge BIOS om mængden af RAM i din maskine.\n"
-#~ "  Som en konsekvens kan det mislykkes for Linux at finde hvor meget RAM "
-#~ "du har. Hvis dette er tilfældet, kan du specifisere rigtig\n"
-#~ "  RAM-mængde her. Bemærk at en difference på 2 eller 4 MB mellem "
-#~ "hukommelse som er fundet og hukommelse i systemet\n"
-#~ "  er normalt.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Fjerneligt media automontering: Hvis du ønsker at ikke montere "
-#~ "fjernelige medier manuelt (CD-ROM, diskette, Zip) ved at skrive\n"
-#~ " \"mount\" og \"umount\", vælg denne mulighed.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Tøm \"/tmp\" ved hver opstart: hvis du ønsker at slette alle filer og "
-#~ "kataloger lagret i \"/tmp\" når du starter dit system op,\n"
-#~ "  så vælg denne mulighed.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Aktivér NumLock ved opstart: Hvis du ønsker NumLock aktiveret efter "
-#~ "opstart, så vælg denne mulighed. Bemærk at du ikke burde aktivere\n"
-#~ "  denne funktion på bærbare og at NumLock måske/måske ikke vil virke "
-#~ "under X."
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "Beklager, mailkonfigurationen er endnu ikke implementeret. Venlist vær "
-#~ "tålmodig."
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "Velkommen til netværkskonfigurationsvejviseren.\n"
-#~ "Hvilke komponenter ønsker du at konfigurere?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Internetadgang"
-
-#~ msgid "Mail information"
-#~ msgstr "Vis information"
-
-#~ msgid "Firewall Configuration Wizard"
-#~ msgstr "Brandmurskonfiguration"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Diverse"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Forskellige spørgsmål"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Kan ikke bruge supermontering på højt sikkerhedsniveau"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Bemærk: I DETTE SIKKERHEDSNIVEAU ER ROOT-INDLOGNING PÅ KONSOL IKKE "
-#~ "TILLADT!\n"
-#~ "Hvis du ønsker at være root må du logge ind som bruger for så at bruge "
-#~ "\"su\".\n"
-#~ "Mere generelt, forvent ikke at bruge din maskine til andet end en "
-#~ "server.\n"
-#~ "Du er blevet advaret."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Vær forsigtig, at have numlock slået til forårsager at mange af tasterne\n"
-#~ "giver tal istedetfor almindelige bogstaver (f.eks: `p' giver `6')"
-
-#~ msgid "not connected"
-#~ msgstr "ikke tilsluttet"
-
-#~ msgid "Actions"
-#~ msgstr "Handlinger"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Videnskabelige programmer"
-
-#~ msgid "toot"
-#~ msgstr "toot"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Fil/Udskrift/Samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Server, DNS/DHCP"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Første DNS-server"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Anden DNS-server"
-
-#~ msgid "using module"
-#~ msgstr "anvender modul"
-
-#~ msgid "Development, Database"
-#~ msgstr "Udvikling, database"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Udvikling, Integreret miljø"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Udvikling, standardværktøjer"
diff --git a/perl-install/share/po/de.po b/perl-install/share/po/de.po
deleted file mode 100644
index 09b39dee9..000000000
--- a/perl-install/share/po/de.po
+++ /dev/null
@@ -1,11009 +0,0 @@
-# german translation of DrakX (cooker/gi/perl-install/share/po/de.po).
-# Copyright (C) 1999,2000,2001 MandrakeSoft.
-# Dr. Hinrich Göhlmann <hgoehlmann@gmx.de>, 1999,2000
-# Stefan Siegel <siegel@linux-mandrake.com>, 1999,2000,2001
-# Daniel Haischt <daniel.haischt@student.fh-reutlingen.de>, 2000
-# Peer Dunker <peer46@gmx.net>, 2001
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-09-24 14:52+0200\n"
-"Last-Translator: Stefan Siegel <siegel@linux-mandrake.com>\n"
-"Language-Team: German <de@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Alle Karten getrennt konfigurieren"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Xinerama Erweiterung verwenden"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Nur Karte „%s“ (%s) konfigurieren"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Mehrkarten-Einstellung"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Ihr System erlaubt die Verwendung einer Mehrkarten Konfiguration.\n"
-"Was wollen Sie tun?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Grafikkarte"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Wählen Sie Ihre Grafikkarte"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Wählen Sie einen X Server"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X Server"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Welche XFree-Konfiguration wollen Sie verwenden?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ihre Karte kann 3D hardwarebeschleunigt werden, allerdings nur mit \n"
-"XFree %s. Ihre Karte wird auch von XFree %s unterstützt, wodurch Sie \n"
-"bessere 2D Unterstützung erhalten können."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Ihre Karte kann mit XFree %s 3D hardwarebeschleunigt werden."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s mit 3D Hardwarebeschleunigung"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Ihre Karte kann 3D hardwarebeschleunigt werden, allerdings nur mit \n"
-"XFree %s. BEMERKUNG: DIESE FUNKTION IST NOCH IM EXPERIMENTIERSTADIUM \n"
-"UND KANN ZUM STEHENBLEIBEN IHRES RECHNERS FÃœHREN."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s mit EXPERIMENTELLER 3D Hardwarebeschleunigung"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ihre Karte kann 3D hardwarebeschleunigt werden, allerdings nur mit \n"
-"XFree %s. BEM: DIESE FUNKTION IST NOCH IM EXPERIMENTIERSTADIUM UND KANN \n"
-"ZUM STEHENBLEIBEN IHRES RECHNERS FÃœHREN. Ihre Karte wird auch von \n"
-"XFree %s unterstützt, wodurch Sie bessere 2D Unterstützung erhalten \n"
-"können."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (Installationsbildschirmtreiber)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree konfigurieren"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Wählen Sie die Speichergröße Ihrer Grafikkarte"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Wählen Sie die Einstellungen für den Server"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Wählen Sie Ihren Monitor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Die beiden kritischen Parameter sind die vertikale Wiederholfrequenz\n"
-"(wie oft der gesamte Bildschirm neu angezeigt wird) und insbesondere die\n"
-"horizontale Synchronisationsfrequenz (wie oft Scanlinien angezeigt werden).\n"
-"Es ist SEHR WICHTIG, dass Sie keinen Monitortyp mit einer falschen \n"
-"Synchronisationsrate auswählen, da Sie sonst Ihren Monitor beschädigen \n"
-"könnten. Im Zweifelsfall wählen Sie bitte eine konservativere \n"
-"Einstellung."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Horizontale Wiederholfrequenz"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Vertikale Wiederholfrequenz"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Ihr Monitor ist nicht konfiguriert"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Ihre Grafikkarte ist noch nicht konfiguriert"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Die Auflösungen wurden noch nicht ausgewählt"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Möchten Sie die vorgenommenen Einstellungen prüfen?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Warnung: Testen dieser Grafikkarte kann Ihren Rechner anhalten"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Prüfen der Einstellungen"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"Versuchen Sie bitte, einige Einstellungen zu ändern"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Ein Fehler ist aufgetreten:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Verlassen in %d Sekunden"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Ist dies richtig?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr ""
-"Ein Fehler ist aufgetreten. Versuchen Sie bitte, einige Parameter zu ändern"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Auflösung"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Wählen Sie bitte Auflösung und Farbtiefe"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafikkarte: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 Server: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Experten-Modus"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Alle anzeigen"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Auflösungen"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastaturtyp: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Maustyp: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Mausschnittstelle: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor Horiz. Frequenz: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor Vert. Frequenz: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafikkarte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafikkartenidentifikation: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafikkartenspeicher: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Farbtiefe: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Auflösung: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 Server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 Treiber: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "X-Window Konfiguration vorbereiten"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Was wollen Sie machen?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Monitor ändern"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Grafikkarte ändern"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Server Einstellungen ändern"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Auflösung ändern"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Informationen anzeigen"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Nochmals testen"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Verlassen"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Die Änderungen beibehalten?\n"
-"Momentan wäre dies:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
-"Bitte loggen Sie sich erneut in %s ein, \n"
-"um die Änderungen wirksam werden zu lassen."
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Bitte loggen Sie sich aus, und drücken Sie Ctrl-Alt-Rücktaste"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X zur Startzeit"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ich kann GNU/Linux so einrichten, dass bei jedem Systemstart\n"
-"automatisch die Grafische Oberfläche (= der X Server) aktiviert wird.\n"
-"Wollen Sie, dass X nach jedem Neustart direkt zur Verfügung steht?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 Farben (8 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32.000 Farben (15 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65.000 Farben (16 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 Millionen Farben (24 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 Milliarden Farben (32 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB oder mehr"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640×480 bei 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800×600 bei 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibel, 1024×768 bei 87 Hz, interlaced (kein 800×600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024×768 bei 87 Hz, interlaced und 800×600 bei 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800×600 bei 60 Hz und 640×480 bei 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024×768 bei 60 Hz und 800×600 bei 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Hochfrequenz SVGA, 1024×768 bei 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Mehrfrequenz mit der Fähigkeit für 1280×1024 bei 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Mehrfrequenz mit der Fähigkeit für 1280×1024 bei 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Mehrfrequenz mit der Fähigkeit für 1280×1024 bei 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Ihr Monitor kann 1600×1200 bei 70 Hz darstellen"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Ihr Monitor kann 1600×1200 bei 76 Hz darstellen"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Erster Sektor der Boot-Partition"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Erster Sektor der Platte (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILO Installation"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Wo soll der Betriebssystemstarter installiert werden?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "LILO/Grub Installation"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO mit Textmenü"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO mit grafischem Menü"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Boot von DOS/Windows aus (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Haupt-Optionen des Betriebssystemstarters"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Zu verwendender Betriebssystemstarter"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Installation des Betriebssystemstarters"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Boot Gerät"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (funktioniert nicht mit alten BIOS Versionen)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Video Modus"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Wartezeit vorm Starten des Standard Betriebssystems"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Passwort"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Passwort (erneut)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Gebrauch der Kommandozeilen-Parameter einschränken"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "Einschränken"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Die Partition /tmp bei jedem Systemstart säubern"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Geben Sie, falls nötig, die genaue RAM Größe an (%d MB gefunden)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Mehrere Profile einschalten"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Geben Sie die RAM Größe in MB an"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Die Option „Gebrauch der Kommandozeilen-Parameter einschränken“ ist ohne \n"
-"Angabe eines Passworts wirkungslos"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Bitte versuchen Sie es erneut"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Die Passwörter stimmen nicht überein"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Init Nachricht"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Verzögerung"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "BS-Startverzögerung für den Kern"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "BS-Start von CD erlauben"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Open Firmware Start erlauben"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Standard BS"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hier sind die verschiedenen Einträge.\n"
-"Sie können weitere hinzufügen oder existierende ändern."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Hinzufügen"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Fertig"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Ändern"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Welche Art Eintrag wollen Sie hinzufügen?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Anderes Betriebssystem (SunOS ...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Anderes Betriebssystem (MacOS ...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Anderes Betriebssystem (Windows ...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Kern"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Verzeichnisbaumwurzel"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Ãœbergeben"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Init-RamDisk"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Schreiben/Lesen"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tabelle"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Unsicher"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Identifikator"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Standard"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Größe der Init-RamDisk"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Eintrag löschen"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Leere Einträge sind nicht erlaubt"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Dieser Eintrag existiert bereits"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Schnittstelle(n) %s %s gefunden"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Verfügen Sie über weitere?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Verfügen Sie über %s Schnittstellen?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Nein"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Hardware Informationen anzeigen"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installation des Treibers für die Karte %s %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(Modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Welchen %s-Treiber soll ich versuchen?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"In einigen Fällen benötigt der „%s“ Treiber zusätzliche Informationen,\n"
-"um korrekt zu funktionieren, meistens sollte er jedoch auch ohne \n"
-"funktionieren. Wollen Sie solche Informationen angeben oder es dem Treiber "
-"überlassen, nach geeigneten Parametern zu suchen? (Das Austesten durch den "
-"Treiber kann in seltenen Fällen zum „Hängenbleiben“ des Rechners führen, was "
-"jedoch keine Hardwareschäden nach sich ziehen sollte)"
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Automatische Erkennung"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Optionen angeben"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Sie müssen nun die Optionen für Modul %s angeben."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sie müssen nun die Optionen für Modul %s angeben.\n"
-"Optionen haben die Form „name=wert name2=wert2“.\n"
-"Beispielsweise: „io=0x300 irq=7“"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Modul-Optionen:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Laden von Modul %s schlug Fehl.\n"
-"Wollen Sie es erneut mit anderen Parametern versuchen?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s wurde bereits hinzugefügt)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Dieses Passwort ist zu einfach"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Bitte geben Sie ein Benutzerkennzeichen an"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Das Benutzerkennzeichen sollte nur aus Kleinbuchstaben, Ziffern, \n"
-"„-“ und „_“ bestehen"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Dieses Benutzerkennzeichen existiert bereits"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Benutzer hinzufügen"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Benutzerkennzeichen einrichten\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Benutzer akzeptieren"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Benutzername"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Benutzerkennzeichen"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Symbol"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:757
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ich kann GNU/Linux so einrichten, dass beim Systemstart automatisch \n"
-"ein Benutzer angemeldet wird.\n"
-"Wollen Sie davon Gebrauch machen?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Wählen Sie den Standard-Nutzer:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Wählen Sie den Window-Manager, den Sie verwenden wollen:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Bitte wählen Sie die zu verwendende Sprache."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Sie können andere Sprachen auswählen, die nach der Installation zur "
-"Verfügung stehen."
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Alle"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Willkommen zum Betriebssystem-Starter %s\n"
-"\n"
-"Markieren Sie in obiger Liste ein Betriebssystem\n"
-"oder warten Sie %d Sekunden, dann starte ich Ihr Standard-System.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Willkommen zum Betriebssystem-Starter GRUB!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Verwenden Sie die Tasten %c und %c um ein Betriebssystem zu w„hlen."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Zum Starten des BS dr�cken Sie <Return>. Mit <e> k”nnen Sie das"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "Kommando vorher editieren, mit <c> erhalten Sie eine Kommandozeile."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "In %d Sekunden wird das gew„hlte BS automatisch gestartet."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "Sie haben nicht genug Platz in „/boot“"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Arbeitsoberfläche"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Start-Menü"
-
-#: ../../bootloader.pm_.c:972
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Sie können den Betriebssystemstarter\n"
-"nicht auf einer %s Partition installieren!\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "Es steht noch keine Hilfe zur Verfügung.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfiguration der Boot-Einstellungen"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Datei"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Datei/_Beenden"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Neuer kategorisierter Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Neuer Stil"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Herkömmlicher Stil"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Herkömmlicher Gtk+ Stil"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Aurora beim Hochfahren starten"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "LILO/GRUB Modus"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Sie verwenden momentan „%s“ als Betriebssystemstarter.\n"
-"Wählen Sie „Konfigurieren“, wenn Sie den Assistenten starten wollen."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Konfigurieren"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Boot-Modus"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "System-Modus"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "X-Window nach dem Hochfahren automatisch starten "
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Nein ich will kein Autologin"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja ich will Autologin mit diesem Kennzeichen und dieser Oberfläche"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Abbruch"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Ich kann „/etc/inittab“ nicht zum lesen öffnen: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Die Installation von LILO schlug Fehl. Folgender Fehler trat auf:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d Minuten"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 Minute"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d Sekunden"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Bitte machen Sie erst eine Sicherheitskopie Ihrer Daten!"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Lesen Sie bitte aufmerksam!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Wenn Sie aboot verwenden wollen, müssen Sie ausreichend Platz am Anfang \n"
-"der Platte lassen (2048 Sektoren reichen aus)."
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Fehler"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Assistent"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Neu"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "Entfernt"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Einhängpunkt"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Optionen"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Typ"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Aushängen"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Einhängen"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Wählen Sie ein Aktion aus"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Sie haben eine große FAT Partition \n"
-"(diese enthält häufig nur Microsoft DOS/Windows).\n"
-"Ich rate Ihnen, diese Partition erst zu verkleinern\n"
-"(Wählen Sie sie an und drücken Sie dann „Größe verändern“)"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Bitte klicken Sie auf eine Partition"
-
-#: ../../diskdrake.pm_.c:240
-msgid "Please click on a media"
-msgstr "Bitte wählen Sie ein Medium"
-
-#: ../../diskdrake.pm_.c:243
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr ""
-"Bitte klicken Sie oben auf eine Schaltfläche\n"
-"\n"
-"oder verwenden Sie „Neu“"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr "Verwenden Sie „Neu“"
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Details"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Journalised FS"
-msgstr "Journalisierendes FS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Auslagerung"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Leer"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Andere"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Dateisystemtypen:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Erzeugen"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Verwenden Sie stattdessen „%s“"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Löschen"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Verwenden Sie erst „umount“"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Nach Änderung des Partitionstyps von %s, werden sämtliche Daten darauf "
-"gelöscht"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Wo wollen Sie das Gerät %s einhängen?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "Einhäng-Optionen"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "Verschiedene"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "Wechselmedien"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "Typ ändern"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Welches Dateisystem wollen Sie verwenden?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "Suchen nach vorhandenen nutzbaren NFS Ressourcen"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "Suchen nach vorhandenen nutzbaren NFS Ressourcen auf Server „%s“"
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-"Falls obige Liste den gewünschten Eintrag nicht bietet,\n"
-"Geben Sie ihn bitte hier ein:"
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Server"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "Geteilte Ressourcen"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "Suchen nach vorhandenen nutzbaren Samba Ressourcen"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "Suchen nach vorhandenen nutzbaren Samba Ressourcen auf Server „%s“"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "Wählen Sie eine Partition"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Wählen Sie eine andere Partition"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Verlassen"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "In den Experten-Modus wechseln"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "In den Normal-Modus wechseln"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Rückgängig"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Wollen Sie trotzdem fortfahren?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Beenden ohne speichern"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Beenden ohne die Partitionstabelle zu speichern?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Möchten Sie die vorgenommenen Änderungen in „/etc/fstab“ speichern?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Automatisches Erstellen"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Alles löschen"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Mehr"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "Festplatten-Informationen"
-
-# ../../diskdrak1
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Nicht genug freier Platz, damit ich selbst Partition anlegen kann."
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Alle Primärpartitionen sind in Gebrauch"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Ich kann keinen weiteren Partitionen hinzufügen"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Um mehr Partitionen einrichten zu können, müssen Sie zunächst eine Partition "
-"löschen und anschließend eine erweiterte Partition erzeugen"
-
-#: ../../diskdrake_interactive.pm_.c:285
-msgid "Save partition table"
-msgstr "Partitionstabelle schreiben"
-
-#: ../../diskdrake_interactive.pm_.c:286
-msgid "Restore partition table"
-msgstr "Partitionstabelle wiederherstellen"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Partitionstabelle retten"
-
-#: ../../diskdrake_interactive.pm_.c:289
-msgid "Reload partition table"
-msgstr "Partitionstabelle neu laden"
-
-#: ../../diskdrake_interactive.pm_.c:293
-msgid "Removable media automounting"
-msgstr "Wechselmedien automatisch Einhängen"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Datei auswählen"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Die gesicherte Partitionstabelle hat nicht dieselbe Größe\n"
-"Soll trotzdem fortgefahren werden?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Warnung"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Legen Sie eine Diskette in das Laufwerk\n"
-"Alle Daten auf dieser Diskette werden gelöscht!"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Ich Versuche, die Partitionstabelle zu retten"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "Ausführliche Informationen"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Größe verändern"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Bewegen"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formatieren"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Aktiv"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Zum RAID hinzufügen"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Zum LVM hinzufügen"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Löschen aus dem RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Löschen aus dem LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "RAID modifizieren"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Als Loopback verwenden"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Erzeuge eine neue Partition"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Anfangssektor: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Größe in MB:"
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Dateisystemtyp: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Einhängpunkt: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Einstellung: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-msgid "Remove the loopback file?"
-msgstr "Die Loopback-Datei entfernen?"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Partitionstyp ändern"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "Konvertiere ext2 zu ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Wo wollen Sie die Loopback-Datei %s einhängen?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ich kann diesen Einhängpunkt nicht zurücksetzen, da diese Partition als \n"
-"Loopback verwendet wird. Bitte entfernen Sie erst diesen Loopback."
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Errechne die Grenzen des FAT Dateisystems"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Neuberechnen der Größe"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Die Größe dieser Partition kann ich nicht ändern"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Sie sollten ein Backup sämtlicher Daten dieser Partition erstellen"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Durch Veränderung der Partitionsgröße von %s, gehen sämtliche Daten darauf "
-"verloren"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Wählen Sie die neue Größe"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "Neue Größe in MB:"
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Zu welcher Platte wollen Sie wechseln?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Zu welchem Sektor wollen Sie wechseln?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "wechsele"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Bewege Partition..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Wählen Sie einen vorhandenen RAID"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "Neu"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Wählen Sie einen vorhandenen LVM"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "LVM Name?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Diese Partition kann nicht als Loopback verwendet werden"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Name der Loopback-Datei: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-msgid "Give a file name"
-msgstr "Dateinamen angeben"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Diese Datei wird bereits von einer anderen Loopback-Verknüpfung verwendet, "
-"wählen Sie eine andere Datei."
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr ""
-"Es existiert bereits eine Datei mit diesem Namen. Soll ich sie verwenden?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "Gerät"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "Level"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "Blockgröße"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Vorsicht: Diese Aktion ist gefährlich."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Welcher Partitionstyp?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Es tut mir Leid, aber ich weigere mich, eine „/boot“ Partition \n"
-"hinter dem Zylinder 1024 anzulegen.\n"
-"Entweder verwenden Sie LILO und es wird nicht funktionieren, oder Sie "
-"verwenden \n"
-"LILO nicht, dann benötigen Sie keine „/boot“ Partition."
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Die Partition, die Sie als Verzeichnisbaumwurzel (/) ausgewählt haben, ist "
-"physikalisch hinter dem 1024ten Zylinder Ihrer Festplatte gelegen und Sie "
-"haben keine „/boot“ Partition eingerichtet. Falls Sie den LILO "
-"Betriebssystemstarter einsetzen wollen, vergessen Sie bitte nicht, eine „/"
-"boot“ Partition anzulegen!"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Sie haben eine Software-RAID-Partition als Verzeichnisbaumwurzel "
-"ausgewählt. \n"
-"Zur Zeit kann kein Betriebssystemstarter damit ohne Verwendung einer \n"
-"„/boot“-Partition arbeiten. Sie sollten also daran denken, eine solche \n"
-"Partition zu erstellen."
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Die Partitionstabelle der Platte „%s“ wird gespeichert!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Sie müssen Ihren Rechner neu starten, damit die Veränderungen wirksam werden"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Nach Formatieren der Partition %s, werden sämtliche Daten darauf gelöscht"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Formatiere"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatiere Loopback-Datei %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiere Partition %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Hide files"
-msgstr "Dateien verstecken"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Move files to the new partition"
-msgstr "Dateien auf die neue Partition verschieben."
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Das Verzeichnis „%s“ enthält bereits Daten\n"
-"(%s)"
-
-#: ../../diskdrake_interactive.pm_.c:906
-msgid "Moving files to the new partition"
-msgstr "Dateien auf die neue Partition verschieben."
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr "Kopiere: %s"
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, c-format
-msgid "Removing %s"
-msgstr "Entferne: %s"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Gerät: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS Laufwerksbuchstabe: %s (vermutlich?)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Typ:"
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Name: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Anfang: Sektor %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Größe: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s Sektoren"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Zylinder %d bis Zylinder %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Formatiert\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Nicht formatiert\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Eingehängt\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback Datei(en):\n"
-"   %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partition wird standardmäßig geladen\n"
-"    (für MS-DOS Boot, nicht jedoch für LILO)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Level %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Blockgröße %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID Platten %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Dateiname des Loopbacks: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Es besteht die Wahrscheinlichkeit,\n"
-"dass es sich um eine Treiber-\n"
-"Partition handelt. Sie sollten sie\n"
-"daher unverändert lassen.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Diese spezielle Start-Partition\n"
-"ist für die Verwendung mehrerer\n"
-"Betriebssysteme auf dem selben\n"
-"Rechner.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Größe: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s Zylinder, %s Köpfe, %s Sektoren\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM Platten %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitionstabellen Typ: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "auf Bus %d ID %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Optionen: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatieren von %s schlug Fehl"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr ""
-"Ich bin nicht in der Lage, %s mit einem Dateisystem vom Typ %s zu "
-"formatieren."
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "Fehler beim Einhängen"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-"Der Dateisystemcheck (fsck) schlug fehl mit dem Rückgabewert %d oder Signal %"
-"d."
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "Fehler beim Einhängen: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "Fehler beim Aushängen von %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "Einfach"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "Server"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-"Sie können JFS nicht für Partitionen verwenden, die kleiner als 16MB sind!"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-"Sie können ReiserFS nicht für Partitionen verwenden, die kleiner als 32MB "
-"sind!"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Einhängpunkte müssen mit einem / beginnen."
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Es gibt bereits eine Partition, mit dem Einhängpunkt %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-"Sie können kein logisches LVM Medium für den Einhängpunkt %s verwenden."
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Dieses Verzeichnis muss in der Verzeichnisbaumwurzel bleiben"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Sie benötigen ein echtes GNU/Linux Dateisystem (Ext2, ReiserFS) für \n"
-"diesen Einhängpunkt.\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fehler beim Öffnen von %s zum Schreiben: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ein Fehler ist aufgetreten - es wurden keine gültigen Geräte gefunden, auf "
-"denen neue Dateisysteme erstellt werden können. Bitte überprüfen Sie Ihre "
-"Hardware(-Konfiguration) auf mögliche Fehler und falsche Einstellungen."
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Sie haben keine Partitionen!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux ist ein Mehrbenutzer-System, das bedeutet konkret jedes\n"
-"Benutzerkennzeichen hat eigene Präferenzen (Grafische Umgebung,\n"
-"Programmeinstellungen, etc.), sowie ein eigenes Heim-Verzeichnis, in dem\n"
-"diese Einstellungen gespeichert werden. Falls Sie mehr wissen wollen,\n"
-"können Sie im Benutzerhandbuch nachsehen. Sie können mehrere normale\n"
-"Benutzerkonten einrichten, im Gegensatz zum „privilegierten“ Kennzeichen:\n"
-"»root«, das einmalig ist. Im Gegensatz zu »root« können diese normalen\n"
-"Benutzer jedoch nur ihre eigenen Dateien und Konfigurationen verändern. Sie\n"
-"können sogar mehrere Benutzerkennzeichen pro Person einrichten, denen Sie\n"
-"Zugang zu Ihrem GNU/Linux-System gewähren wollen. Erstellen Sie sich ein\n"
-"eigenes Benutzerkennzeichen, auch wenn Sie der einzige Anwender sind, der\n"
-"diesen Rechner nutzt. Sie sollten nicht ständig mit dem privilegierten\n"
-"Kennzeichen arbeiten! Das ist ein hohes Sicherheitsrisiko! Wenn Sie einen\n"
-"schweren Fehler als einfacher Benutzer machen, dann können Sie maximal\n"
-"Daten verlieren, jedoch nicht Ihr gesamtes System unbrauchbar machen.\n"
-"\n"
-"Zuerst geben Sie bitte einen normalen Namen an. Das muss nicht\n"
-"notwendigerweise Ihr richtiger Name sein. „DrakX“ wird das erste Wort, das\n"
-"Sie eingegeben haben, in das Feld „Benutzerkennzeichen“ eintragen. Dies ist\n"
-"der Name, den Sie zum Anmelden für dieses Kennzeichen benötigen. Natürlich\n"
-"können Sie ihn hier nach Belieben verändern. Dann geben Sie Ihrem Konto ein\n"
-"Passwort. Für ein Benutzerkennzeichen ist dieses zwar nicht von so\n"
-"herausragender Bedeutung wie das für »root«, doch Sie sollten trotzdem\n"
-"etwas Sorgfalt walten lassen. Immerhin sind es Ihre Daten...\n"
-"\n"
-"Klicken Sie auf „Benutzer akzeptieren“, um das Kennzeichen zu erstellen.\n"
-"Anschließend können Sie direkt weitere Benutzer hinzufügen. Wenn Sie allen\n"
-"Kennzeichen erstellt haben, klicken Sie auf „Fertig“.\n"
-"\n"
-"Durch Anwahl der Schaltfläche „Fortgeschritten“ haben Sie auch die\n"
-"Möglichkeit, die Standard-Shell dieses Benutzers ändern (normalerweise ist\n"
-"dies die „Bash“)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Oben sehen Sie die auf Ihrer Festplatte gefundenen Linux-Partitionen. Als\n"
-"normaler Linuxanwender können Sie problemlos die Vorschläge des Assistenten\n"
-"übernehmen. Sollten Sie diesen Vorschlag ändern, müssen Sie zumindest eine\n"
-"Partition als Verzeichnisbaumwurzel („/“) definieren. Wählen Sie keine zu\n"
-"kleine Partition, da sie sonst nicht genug Software installieren können.\n"
-"Falls Sie Ihre persönlichen Daten auf einer getrennten Partition speichern\n"
-"möchten, müssen Sie eine Linux-Partition für ihre persönlichen\n"
-"Verzeichnisse („/home“) definieren (Dies geht natürlich nur, wenn Sie mehr\n"
-"als nur eine Linux Partition haben).\n"
-"\n"
-"Alle Partitionen werden folgendermaßen aufgeführt: „Name“, „Kapazität“\n"
-"\n"
-"„Name“ ist zusammengesetzt aus: „Festplattentyp“, „Festplattennummer“ und\n"
-"„Partitionsnummer“ (etwa, „hda1“ oder „sdb4“).\n"
-"\n"
-"„Festplattentyp“ ist „hd“ falls es sich um einen IDE Platte handelt und\n"
-"„sd“ wenn es eine SCSI Platte ist.\n"
-"\n"
-"„Festplattennummer“ ist der Buchstabe hinter „hd“ oder „sd“. Bei IDE\n"
-"Platten bedeutet:\n"
-"\n"
-" * „a“ - „Master Festplatte am primären IDE Kontroller“,\n"
-"\n"
-" * „b“ - „Slave Festplatte am primären IDE Kontroller“,\n"
-"\n"
-" * „c“ - „Master Festplatte am sekundären IDE Kontroller“,\n"
-"\n"
-" * „d“ - „Slave Festplatte am sekundären IDE Kontroller“,\n"
-"\n"
-"Bei SCSI Platten steht „a“ für „erste Festplatte am Bus“, „b“ für „zweite\n"
-"Festplatte am Bus“, etc."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Da die Mandrake Linux-Distribution stetig wächst, wurde sie in mehrere\n"
-"CD-ROMs unterteilt. Es kann daher vorkommen, dass „DrakX“ Pakete von\n"
-"anderen, als der Installations-CD-ROM installieren will. In diesem Fall\n"
-"wird es die aktuelle CD-ROM auswerfen und nach einer anderen fragen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Nun ist es Zeit sich zu entscheiden, welche Programme Sie auf Ihrem Rechner\n"
-"installieren wollen. Es gibt tausende von Paketen für Mandrake Linux, und\n"
-"sie müssen Sie nicht alle auswendig kennen.\n"
-"\n"
-"Wenn Sie eine klassische CD-ROM-Installation vornehmen, werden Sie zuerst\n"
-"nach den Ihnen zur Verfügung stehenden CDs gefragt. Markieren Sie die\n"
-"Zeilen anhand der CDs die Sie vorliegen haben und klicken Sie auf die\n"
-"Schaltfläche „OK“.\n"
-"\n"
-"Die Pakete sind nach ihrer Verwendung in Gruppen eingeteilt. Diese Gruppen\n"
-"wiederum enthalten vier Abschnitte:\n"
-"\n"
-" * „Arbeitsplatzrechner“: Falls Ihr Rechner als Arbeitsplatzrechner\n"
-"verwendet werden soll, markieren Sie ein oder mehrere Gruppen.\n"
-"\n"
-" * „Grafische Oberfläche“: Wählen Sie hier Ihre bevorzugte grafische\n"
-"Arbeitsoberfläche. Wenn Sie eine grafische Oberfläche verwenden wollen, so\n"
-"müssen Sie hier zumindest eine Gruppe auswählen.\n"
-"\n"
-" * „Entwicklungsplattform“: Falls Sie mit Ihrem Rechner programmieren\n"
-"wollen, sollten Sie diese Gruppe markieren.\n"
-"\n"
-" * „Server“: Letztendlich, wenn Ihre Maschine ein Server werden soll, "
-"können\n"
-"Sie hier die wichtigsten Dienste auswählen, die auf Ihren Rechner\n"
-"installiert werden sollen.\n"
-"\n"
-"Wenn Sie die Maus über eine Gruppe bewegen, erhalten Sie einen kurzen\n"
-"erklärenden Text über die Gruppe.\n"
-"\n"
-"Wenn Sie die Schaltfläche „Fortgeschritten“ anwählen, erhalten Sei die\n"
-"Möglichkeit, eine „Individuelle Paketauswahl“ durchzuführen. Das macht nur\n"
-"Sinn, wenn Sie die Pakete genau kennen oder wenn Sie volle Kontrolle\n"
-"darüber haben wollen, was installiert werden soll.\n"
-"\n"
-"Haben Sie die Installation als „Aktualisierung“ gestartet, können Sie die\n"
-"Markierungen aller Gruppen entfernen, um die Installation neuer Pakete zu\n"
-"vermeiden. Hierdurch werden nur bereits installierte Pakete aktualisiert\n"
-"oder repariert."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Schlussendlich erhalten Sie (falls Sie sich für „Individuelle Paketauswahl“\n"
-"entschieden haben) eine Baumliste aller Pakete die zu den von Ihnen\n"
-"gewünschten Gruppen gehören. Diese Pakete sind nach Gruppen und\n"
-"Untergruppen klassifiziert. Beim Durchstöbern des Baums, können Sie\n"
-"Gruppen, Untergruppen oder einzelne Pakete markieren oder deren Markierung\n"
-"entfernen.\n"
-"\n"
-"Sobald Sie ein Paket auswählen, erscheint rechts eine kurze Beschreibung.\n"
-"Sobald Sie die Auswahl abgeschlossen haben, bestätigen Sie das durch\n"
-"drücken der Schaltfläche „Installation“. Nun beginnt die eigentliche\n"
-"Installation. Falls Sie eine Vielzahl von Paketen installieren wollen,\n"
-"können Sie nun getrost einen Kaffee trinken gehen.\n"
-"\n"
-"!! Es kommt vor, dass Server- und Dienst-Pakete angewählt wurden - entweder\n"
-"absichtlich, oder als Paket einer ganzen Gruppe; sollte das der Fall sein,\n"
-"werden Sie nun gefragt, ob Sie diese wirklich installiert haben wollen.\n"
-"Unter Mandrake Linux werden installierte Server und Dienste automatisch\n"
-"beim Betriebssystemstart gestartet. Selbst wenn zum Zeitpunkt, als die\n"
-"Distribution zusammengestellt wurde, keine Sicherheitslücken oder Fehler in\n"
-"diesen Paketen bekannt waren, ist natürlich nicht auszuschließen, dass\n"
-"später solche Fehler gefunden werden. Sollten Sie also nicht wissen, wovon\n"
-"hier die Rede ist, wählen Sie sicherheitshalber lieber „Nein“. Falls Sie\n"
-"mit „Ja“ antworten, werden die Dienste und Server installiert und stehen\n"
-"Ihnen nach der Installation standardmäßig zur Verfügung. !!\n"
-"\n"
-"Die Option „Automatische Abhängigkeiten“ unterdrückt nur die Warnungen, die\n"
-"erscheinen, wenn das Installationsprogramm Pakete automatisch markiert, um\n"
-"Paketabhängigkeiten aufzulösen, wenn Sie ein Paket auswählen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Wenn Sie Ihren Computer mit dem Internet oder mit einem lokalen Netzwerk\n"
-"verbinden wollen, dann wählen Sie bitte die entsprechende Option aus. Bitte\n"
-"schalten Sie jedoch zuvor, falls nötig, die dafür benötigten Geräte ein,\n"
-"damit „DrakX“ sie automatisch erkennen kann.\n"
-"\n"
-"Mandrake Linux bietet Ihnen die Möglichkeit, Ihre Internet-Verbindung\n"
-"bereits während der Installation zu konfigurieren. Zur Auswahl stehen\n"
-"folgende Verbindungsarten: Herkömmliches Modem, ISDN Modem, ADSL\n"
-"Verbindung, Kabelmodem oder eine einfache LAN Verbindung (Ethernet).\n"
-"\n"
-"Wir wollen hier nicht weiter ins Detail gehen, nur soviel: Stellen Sie\n"
-"sicher, dass sie die nötigen Parameter von Ihrem Internet Provider oder\n"
-"Systemadministrator erhalten haben.\n"
-"\n"
-"Weitere Einzelheiten, die hier bereits hilfreich sein können, erhalten Sie\n"
-"im Kapitel DrakNet. Falls Sie unsicher sind, warten Sie ab, bis die\n"
-"Installation beendet ist und verwenden Sie danach das beschriebene\n"
-"Programm, um Ihre Verbindung einzurichten.\n"
-"\n"
-"Wenn Sie Ihr Netzwerk erst nach Abschluss der Installation einrichten\n"
-"wollen oder sobald Sie die Konfiguration beendet haben, klicken Sie auf\n"
-"„Abbrechen“."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Als nächstes können Sie die Dienste auswählen, die während des\n"
-"Betribssystemstars aktiviert werden sollen.\n"
-"\n"
-"Hier werden alle Dienste, die nach der aktuellen Installation zum BS-Start\n"
-"zur Verfügung stehen, angezeigt. Lesen Sie diese Liste sorgfältig durch und\n"
-"markieren Sie nur die Dienste, die Sie immer ab dem BS-Start zur Verfügung\n"
-"haben wollen.\n"
-"\n"
-"Wenn Sie einen Dienst anwählen, so erhalten Sie eine kurze Erklärung dazu.\n"
-"Wenn Sie nicht sicher sind, ob ein Dienst bzw. Server sinnvoll ist oder\n"
-"nicht, verändern Sie am Besten die voreingestellten Markierungen nicht.\n"
-"\n"
-"Sollten Sie Ihren Rechner als Server verwenden wollen, so müssen Sie an\n"
-"dieser Stelle besonders vorsichtig sein: wählen Sie alle Dienste ab, die\n"
-"Sie nicht benötigen. Denken Sie daran, dass etliche Dienste eine\n"
-"potentielle Einbruchstelle in das System von außen darstellen, wenn diese\n"
-"im Serverbetrieb laufen. Also, nur die Dienste einschalten, die Sie\n"
-"wirklich brauchen!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux arbeitet mit GMT (Greenwich Mean Time) und übersetzt diese anhand\n"
-"der Zeitzone in Ihre lokale Zeit.\n"
-"\n"
-"Da MicrosoftWindows(TM) nicht sinnvoll mit GMT umgehen kann, müssen Sie\n"
-"„Nein“ wählen, falls Sie auch ein Betriebssystem aus dem Hause Microsoft\n"
-"auf Ihrem Rechner „beherbergen“"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-"X (das X Window System) ist das Herz der grafischen Benutzeroberfläche von\n"
-"GNU/Linux. Es bildet die Grundlage für die Vielzahl grafischer\n"
-"Benutzerumgebungen, die Mandrake Linux Ihnen anbietet (wie etwaKDE, GNOME,\n"
-"AfterStep oder WindowMaker). Auch hier wird „DrakX“ die Konfiguration\n"
-"soweit wie möglich selbstständig vollziehen.\n"
-"\n"
-"Sollten Sie nicht gerade sehr alte, sehr neue oder exotische Grafikhardware\n"
-"einsetzen, wird „DrakX“ die Konfiguration erfolgreich durchführen und\n"
-"anschließend die grafische Oberfläche mit der bestmöglichen Auflösung\n"
-"starten! Es erscheint ein Testfenster und Sie werden anschließend gefragt,\n"
-"ob die Anzeige einwandfrei war.\n"
-"\n"
-"Falls Sie eine „Experte“n-Installation vornehmen, werden Sie in den\n"
-"folgenden Schritten von dem „DrakX“-Konfigurationsassistenten begleitet.\n"
-"\n"
-"Falls das Bild korrekt dargestellt wird, wählen Sie bitte die Schaltfläche\n"
-"„Ja“ an, „DrakX“ wird dann mit dem nächsten Schritt der Installation\n"
-"fortfahren. Sollte der Schirm aus irgendwelchen Gründen nicht lesbar sein,\n"
-"müssen Sie nur 10 Sekunden warten. Anschließend sollte wieder das\n"
-"Konfigurationsmenü erscheinen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Es kann Ihnen passieren, dass der erste Versuch noch nicht korrekt ist (Der\n"
-"Schirm ist zu klein, liegt zu weit rechts oder links...). Daher werden Sie\n"
-"selbst dann mit der Frage konfrontiert, wenn der „DrakX“-Server sich\n"
-"starten lies, „DrakX“ also davon ausgehen könnte, dass alles in Ordnung\n"
-"ist. Sie erhalten daher eine Liste von gültigen Modi, aus denen Sie\n"
-"versuchen sollten den besten auszuwählen.\n"
-"\n"
-"Sollten alle stricke reißen, und „DrakX“ immer noch nicht laufen, wählen\n"
-"Sie einfach im Untermenü „Grafikkarte ändern“, den Punkt „Nicht\n"
-"aufgeführt“. Wenn Sie dann nach dem Server gefragt werden, wählen Sie den\n"
-"„FBDev“: Diese Variante sollte mit allen modernen Grafikkarten\n"
-"funktionieren. Ein „Nochmals testen“ sollte Gewissheit bringen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Letztlich werden Sie gefragt, ob sie direkt in die grafische Oberfläche\n"
-"starten wollen. Diese Frage wird auch erscheinen, wenn Sie das Testen der\n"
-"Konfiguration übersprungen haben. Schlug die Konfiguration der grafischen\n"
-"Umgebung fehl oder wollen Sie den Rechner als Server laufen lassen, geben\n"
-"Sie natürlich „Nein“ an."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Die Mandrake LinuxCD-ROM hat einen eingebauten Rettungsmodus. Sie erreichen\n"
-"ihn durch Booten von CD-ROM, und Drücken von »F1« bei Bootbeginn. Geben Sie\n"
-"dann »rescue« an der Eingabeaufforderung ein. Falls Ihr Rechner nicht von\n"
-"CD-ROM booten kann, sollten Sie diesen Punkt unbedingt aus zwei Gründen\n"
-"abarbeiten:\n"
-"\n"
-" * Im Installationsabschnitt schreibt „DrakX“ den Boot-Sektor (MBR) Ihrer\n"
-"primären Festplatte neu (außer Sie wollen einen anderen\n"
-"Betriebssystemstarter verwenden), damit Sie die verschiedenen, vorhandenen\n"
-"Betriebssysteme starten können (etwa Windows und GNU/Linux); Sollten Sie\n"
-"etwa MicrosoftWindows neu installieren, wird dieses - ohne Sie zu fragen -\n"
-"Ihren Boot-Sektor überschreiben. Somit werden Sie Ihr GNU/Linux nicht mehr\n"
-"starten können! Mit einer Startdiskette können Sie Ihr GNU/Linux-System\n"
-"dann trotzdem hochfahren und diese Änderungen rückgängig machen.\n"
-"\n"
-" * Sollten Ihnen andere schwerwiegende Systemfehler das Starten von\n"
-"GNU/Linux von der Festplatte unmöglich machen, ist diese Startdiskette so\n"
-"ziemlich die einzige Möglichkeit, auf Ihr System zuzugreifen. Zudem enthält\n"
-"sie eine Anzahl von Systemprogrammen, die Ihnen bei der Behebung von\n"
-"Systemfehlern (nach einem Stromausfall, einen unglücklichen Tippfehler in\n"
-"einem Passwort, etc.) helfen werden.\n"
-"\n"
-"Wenn Sie diesen Schritt anwählen, wird „DrakX“ Sie bitten, eine Diskette in\n"
-"Laufwerk zu legen. Die Diskette sollte natürlich leer sein (zumindest keine\n"
-"relevanten Daten enthalten). Sie muss nicht formatiert sein, „DrakX“\n"
-"kümmert sich um alles."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Sie müssen nun entscheiden, wo auf Ihrer/n Festplatte(n) Ihr Mandrake Linux\n"
-"System installiert werden soll. Sofern alles leer ist bzw ein\n"
-"Betriebssystem alles belegt, müssen die Platte neu partitioniert werden.\n"
-"Prinzipiell besteht das Partitionieren der Platte(n) darin, den\n"
-"Plattenplatz so aufzuteilen, dass Ihr Mandrake Linux darauf installiert\n"
-"werden kann.\n"
-"\n"
-"Da dieser Schritt normalerweise irreversibel ist, kann das Partitionieren\n"
-"für unerfahrene Anwender unangenehm und stressig sein. Dieser Assistent\n"
-"kann Ihnen diesen Schritt abnehmen. Lesen Sie dennoch vor Beginn im\n"
-"Handbuch die entsprechenden Passagen und lassen Sie sich Zeit mit der\n"
-"Entscheidung.\n"
-"\n"
-"Wenn Sie die Installation im Expertenmodus durchführen, werden Sie nun das\n"
-"Mandrake Linux Partitionier-Werkzeug kennenlernen: „DiskDrake“. Es erlaubt\n"
-"Ihnen Ihre Partitionen genau abzustimmen. Genauere Informationen erhalten\n"
-"Sie im Kapitel DiskDrake des Handbuchs Die Verwendung ist identisch. Falls\n"
-"Sie keine Ahnung haben, wie Sie die Festplatte partitionieren sollen,\n"
-"wählen Sie die Schaltfläche „Assistent“ und überlassen diesem damit die\n"
-"gesamte Arbeit.\n"
-"\n"
-"Sollten Sie bereits Partitionen haben (etwa von einer alten GNU/Linux\n"
-"Installation oder welche, die mit einem anderen Partitionierungswerkzeug\n"
-"erstellt wurden), die Sie für die Installation von Mandrake Linux verwenden\n"
-"wollen, wählen Sie diese hier einfach aus.\n"
-"\n"
-"Falls noch keine Partitionen existieren, müssen Sie sie erstellen.\n"
-"Verwenden Sie dafür obigen Assistenten. Abhängig vom aktuellen Zustand\n"
-"Ihrer Platte(n) haben Sie verschiedene Alternativen:\n"
-"\n"
-" * „Freien Platz verwenden“: Dies führt einfach dazu, dass Ihre leere\n"
-"Festplatte(n) automatisch partitioniert werden; Sie müssen sich also um\n"
-"nichts weiter kümmern.(*)\n"
-"\n"
-" * „Verwende existierende“: Der Assistent hat eine oder mehrere "
-"existierende\n"
-"Linux Partitionen auf Ihrer Platte gefunden. Wählen Sie diese Schaltfläche,\n"
-"falls Sie sie behalten wollen.\n"
-"\n"
-" * „Komplette Platte löschen“: Falls Sie alle Daten Ihrer Platte verlieren,\n"
-"und sie durch Ihr neues Mandrake Linux System ersetzen wollen, wählen Sie\n"
-"diese Schaltfläche. Beachten Sie, dass dieser Schritt nicht rückgängig\n"
-"gemacht werden kann.\n"
-"\n"
-" * „Freien Platz der Windows Partition verwenden“: Falls der gesamte\n"
-"Plattenplatz aktuell für MicrosoftWindows(TM) verschwendet ist, müssen Sie\n"
-"für Linux Platz schaffen. Um dies zu erreichen, können Sie entweder Ihre\n"
-"MicrosoftWindows(TM) Partition(en) samt Daten löschen (siehe „Komplette\n"
-"Platte löschen“ oder „Experten-Modus“) oder Ihre Windows Partition\n"
-"verkleinern. Letzteres geht ohne Datenverlust. Sie sollten diese Variante\n"
-"wählen, falls Sie beide Betriebssysteme (Windows und Mandrake Linux)\n"
-"nebeneinander nutzen wollen.\n"
-"\n"
-"   Bevor Sie sich für diese Variante entscheiden, sei hier noch einmal "
-"betont,\n"
-"dass das bedeutet, Sie haben weniger Platz für Windows als momentan.\n"
-"\n"
-" * „Windows(TM) löschen“: Bei dieser Variante werden alle Windows\n"
-"Partitionen gelöscht und die Platte(n) komplett neu partitioniert.\n"
-"\n"
-"   !! Alle Daten auf den Platten gehen dadurch verloren! !!\n"
-"\n"
-" * „Expertenmodus“: wenn Sie Ihre Festplatte selber von Hand partitionieren\n"
-"wollen, dann können Sie diese Option wählen. Seien Sie bitte sehr\n"
-"sorgfältig, wenn Sie diese Lösung wählen, da Sie zwar alle möglichen\n"
-"Einstellungen vornehmen, aber gleichzeitig auch sehr leicht Daten verlieren\n"
-"können. Also, diese Option ist nur geeignet, wenn Sie wissen, was Sie tun.\n"
-"\n"
-"(*) In Deutschland ist es quasi unmöglich, Komplettrechner mit leeren\n"
-"Festplatten zu erhalten, da laut Gesetz nur Rechner mit BS verkauft werden\n"
-"dürfen. Diese Regelung stammt noch aus der Zeit, als Politiker nur\n"
-"proprietäre kommerzielle BSe kannten und sich nicht vorstellen konnten,\n"
-"dass es freie und sogar kostenlose Alternativen gibt. Jeder Käufer eines\n"
-"Komplettrechners ohne BS wurde quasi mit einem Raubkopierer von Produkten\n"
-"aus Redmond gleichgesetzt."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Nun ist es soweit, die Installation ist abgeschlossen und Ihr neues\n"
-"Betriebssystem sollte einsatzbereit sein. Bei einem Neustart können Sie\n"
-"zwischen den auf Ihrer Platte installierten Betriebssystemen auswählen.\n"
-"Klicken Sie nur noch auf „OK“ und das System wird neu gestartet.\n"
-"\n"
-"Die Schaltfläche „Fortgeschritten“ liefert zwei weitere Schaltflächen:\n"
-"\n"
-" * „Erstelle einer Auto-Installationsdiskette“: Hiermit können Sie eine\n"
-"Installationsdiskette erstellen, mit deren Hilfe Sie eine identische\n"
-"automatische Installation ohne Interaktion eines Administrators\n"
-"durchzuführen können.\n"
-"\n"
-"   Es gibt zwei verschiedene Alternativen, nachdem Sie diese Schaltfläche\n"
-"aktiviert haben:\n"
-"\n"
-"    * „Erneut abspielen“: Diese Installation ist nur teilweise automatisch, "
-"da\n"
-"der Partitionierungsschritt (aber nur dieser!) immer noch interaktiv\n"
-"vonstatten geht.\n"
-"\n"
-"    * „Automatisiert“: Vollautomatische Installation: Die Festplatte wird\n"
-"vollständig reorganisiert. Alle darauf vorhandenen Daten gehen verloren!\n"
-"\n"
-"   Diese Funktion ist besonders nützlich, wenn man eine Menge von "
-"identischer\n"
-"Rechner einrichten will. Weitere Informationen erhalten Sie auch auf der\n"
-"Seite Auto install\n"
-"\n"
-" * „Paketauswahl speichern“: (*) Sie speichern damit die Paketauswahl, die\n"
-"Sie vorher getroffen haben. Wenn Sie später eine erneute Installation\n"
-"vornehmen wollen, legen Sie einfach die Diskette ins Laufwerk und starten\n"
-"Sie die Installation mittels [F1] an der ersten Eingabeaufforderung. Geben\n"
-"Sie dann »linux defcfg=\"floppy\"« ein.\n"
-"\n"
-"(*) Sie benötigen eine FAT formatierte Diskette (Mittels „mformat a:“\n"
-"können Sie unter GNU/Linux eine solche erstellen)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Alle neu angelegten Partitionen müssen formatiert werden (= ein Dateisystem\n"
-"darauf erzeugt) werden, bevor Sie sie verwenden können.\n"
-"\n"
-"Möglicherweise wollen Sie auch einige bereits existierende Partitionen\n"
-"formatieren, um alle darauf vorhandenen Daten zu löschen. Falls ja,\n"
-"markieren Sie diese ebenfalls.\n"
-"\n"
-"Es sei angemerkt, das bereits existierende Partitionen nicht erneut\n"
-"formatiert werden müssen. Sie sollten Partitionen, die Teile des\n"
-"Betriebssystems enthalten neu formatieren (etwa „/“, „/usr“ oder „/var“),\n"
-"Partitionen mit Ihren privaten Daten (normalerweise „/home“) sollten Sie\n"
-"jedoch nicht neu formatieren.\n"
-"\n"
-"Seien Sie in diesem Schritt sehr sorgfältig. Nach dem Formatieren einer\n"
-"Partition ist der komplette Inhalt unwiederbringlich gelöscht!\n"
-"\n"
-"Wählen Sie „OK“, sobald Sie bereit sind die Partitionen zu formatieren.\n"
-"\n"
-"Wählen Sie „Abbruch“, falls Sie andere Partitionen verwenden wollen, um Ihr\n"
-"Mandrake Linux darauf zu installieren.\n"
-"\n"
-"Wählen Sie „Fortgeschritten“, um die Möglichkeit zu erhalten, Partitionen\n"
-"anzugeben, die auf defekte Blöcke untersucht werden sollen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Ihre neue Mandrake Linux Distribution wird nun installiert. Das dauert\n"
-"einige Minuten (abhängig von der Anzahl zu installierender Pakete und der\n"
-"Geschwindigkeit Ihres Rechners).\n"
-"\n"
-"Bitte haben Sie etwas Geduld."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"Lesen Sie bitte aufmerksam die die Lizenz, bevor Sie fortfahren. Sie\n"
-"umfasst die gesamte Mandrake Linux Distribution. Sollten Sie nicht in allen\n"
-"Punkten zustimmen, betätigen Sie bitte die Schaltfläche „Zurückweisen“, um\n"
-"die Installation abzubrechen. Um mit der Installation fortzufahren\n"
-"betätigen Sie die Schaltfläche „Akzeptieren“."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Nun ist es an der Zeit, die gewünschte Sicherheitsebene für Ihr System\n"
-"festzulegen. Als Faustregel sollte hier dienen: Je zugänglicher die\n"
-"Maschine ist und je kritischer die auf ihr gesicherten Daten sind, desto\n"
-"höher sollte die Sicherheitsebene sein. Andererseits geht die gewonnene\n"
-"Sicherheit zulasten der Benutzerfreundlichkeit und Einfachheit, mit der\n"
-"gewisse Befehle/Abläufe durchgeführt werden können. Ausführlichere\n"
-"Erläuterungen zu den verschiedenen Sicherheitsebenen erhalten Sie im\n"
-"Kapitel MSEC des Referenzhandbuchs.\n"
-"\n"
-"Sollten Sie sich an dieser Stelle nicht sicher sein, so behalten Sie die\n"
-"Standardeinstellung bei."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Sie müssen nun entscheiden auf welche Partition(en) Ihr neues Mandrake\n"
-"Linux System installiert werden soll. Falls bereits Partitionen existieren\n"
-"(etwa von einer früheren Installation von GNU/Linux oder durch das Erzeugen\n"
-"mit einem anderen Partitionierungswerkzeug), können Sie diese verwenden.\n"
-"Anderenfalls müssen Sie Partitionen definieren.\n"
-"\n"
-"Um Partitionen zu erzeugen müssen Sie erst eine Festplatte wählen. Sie\n"
-"können die Platte wählen in dem Sie „hda“ für die erste IDE-Platte wählen,\n"
-"„sda“ für die erste SCSI-Platte, usw.\n"
-"\n"
-"Um die gewählte Platte zu partitionieren stehen folgende Möglichkeiten zur\n"
-"Verfügung:\n"
-"\n"
-" * „Alles löschen“: Betätigen dieser Schaltfläche löscht alle Partitionen\n"
-"auf der markierten Festplatte.\n"
-"\n"
-" * „Automatisches Erstellen“: Diese Schaltfläche erstellt automatisch Ext2-\n"
-"und Swap-Partitionen im ungenutzten Bereich Ihrer Festplatte.\n"
-"\n"
-" * „Partitionstabelle retten“: Falls Ihre Partitionstabelle defekt ist,\n"
-"können Sie durch drücken dieser Schaltfläche versuchen Sie wieder\n"
-"herzustellen. Seien Sie vorsichtig und denken Sie immer daran, dass dieser\n"
-"Versuch misslingen kann.\n"
-"\n"
-" * „Rückgängig“: Mit dieser Schaltfläche können Sie alle Einstellungen\n"
-"rückgängig machen.\n"
-"\n"
-" * „Neu laden“: Sie können durch betätigen dieser Schaltfläche alle\n"
-"Einstellungen rückgängig machen und die (noch bestehende) Partitionstabelle\n"
-"neu laden.\n"
-"\n"
-" * „Assistent“: Falls Sie keine Ahnung haben wie Sie die Festplatte\n"
-"partitionieren sollen, wählen Sie diese Schaltfläche. Sie überlassen damit\n"
-"die gesamte Arbeit unserem Assistenten, der mittels „Abra Kadabra“(TM) Ihre\n"
-"Platte partitioniert.\n"
-"\n"
-" * „Von Diskette wiederherstellen“: Falls Sie Ihre Partitionstabelle vor\n"
-"Beginn auf eine Diskette gespeichert haben, können Sie sie mittels dieser\n"
-"Schaltfläche wieder zurückschreiben.\n"
-"\n"
-" * „Auf Diskette speichern“: Falls Sie Ihre aktuelle Partitionstabelle auf\n"
-"Diskette speichern wollen, falls Sie sie später wiederherstellen wollen,\n"
-"können Sie das mit Hilfe dieser Schaltfläche tun.\n"
-"\n"
-" * „Fertig“: Nachdem Sie das Partitionieren Ihrer Festplatte beendet haben,\n"
-"aktivieren Sie diese Schaltfläche, um Ihre Änderungen zu speichern.\n"
-"\n"
-"Information: Sie können alle Einstellungen per Tastatur vornehmen. Sie\n"
-"können sich mittels [Tab] und den Pfeiltasten bewegen.\n"
-"\n"
-"Wenn eine Partition ausgewählt ist, können Sie mittels:\n"
-"\n"
-" * [Strg]-[C] - eine neue Partition erstellen (wenn Sie auf einer leeren\n"
-"Partition sind)\n"
-"\n"
-" * [Strg]-[D] - die Partition löschen\n"
-"\n"
-" * [Strg]-[M] - dem Einhängpunkt festlegen\n"
-"\n"
-"Falls Sie die Installation auf einem PPC-Rechner vornehmen, sollten Sie\n"
-"eine mindestens 1 MB große HFS Start-Partition für den\n"
-"Betriebssystemstarter „Yaboot“ erstellen. Wenn Sie diese Partition etwas\n"
-"größer dimensionieren, etwa 50 MB, haben Sie einen geeigneten Platz, um\n"
-"einen Rettungskern samt RamDisk abzulegen, um in Notfällen starten zu\n"
-"können."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Es wurde mehr als nur eine MicrosoftWindows(TM) Partition auf Ihrer Platte\n"
-"gefunden. Bitte wählen Sie welche Sie verkleinern wollen, um Ihr neues\n"
-"Betriebssystem Mandrake Linux installieren zu können.\n"
-"\n"
-"Zu Ihrer Information sind alle Partitionen folgendermaßen aufgeführt:\n"
-"„Linuxname“, „Windowsname“, „Kapazität“.\n"
-"\n"
-"„Linuxname“ ist zusammengesetzt aus: „Festplattentyp“, „Festplattennummer“\n"
-"und „Partitionsnummer“ (etwa, „hda1“ oder „sdb4“).\n"
-"\n"
-"„Festplattentyp“ ist „hd“ falls es sich um einen IDE Platte handelt und\n"
-"„sd“ wenn es eine SCSI Platte ist.\n"
-"\n"
-"„Festplattennummer“ ist der Buchstabe hinter „hd“ oder „sd“. Bei IDE\n"
-"Platten bedeutet:\n"
-"\n"
-" * „a“ - „Master Festplatte am primären IDE Kontroller“,\n"
-"\n"
-" * „b“ - „Slave Festplatte am primären IDE Kontroller“,\n"
-"\n"
-" * „c“ - „Master Festplatte am sekundären IDE Kontroller“,\n"
-"\n"
-" * „d“ - „Slave Festplatte am sekundären IDE Kontroller“.\n"
-"\n"
-"Bei SCSI Platten steht „a“ für „erste Festplatte am Bus“, „b“ für „zweite\n"
-"Festplatte am Bus“, etc.\n"
-"\n"
-"„Windowsname“ ist der Laufwerksbuchstabe, wie er von Windows vergeben wird\n"
-"(die erste FAT Partition der ersten Platte heißt „C:“)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Bitte gedulden Sie sich etwas. Es kann einige Minuten dauern."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"„DrakX“ fragt Sie nun nach der gewünschten Installationsart. Sie müssen\n"
-"sich nun auch entscheiden, ob Sie eine Installation oder eine\n"
-"Aktualisierung einer bereits vorhandenen Mandrake Linux-Version vornehmen\n"
-"wollen. Es ist möglich, die Installation über ein existierendes BS zu\n"
-"installieren und dieses damit zu entfernen. Sie können auch eine\n"
-"Aktualisierung vornehmen, um eine existierende Installation zu reparieren.\n"
-"\n"
-"Wählen Sie bitte „Installieren“, falls auf Ihrem Systeme keine älteren\n"
-"Versionen von Mandrake Linux installiert sind oder Sie mehrere\n"
-"Betriebssysteme verwenden wollen.\n"
-"\n"
-"Wählen Sie bitte „Aktualisieren“, falls Sie eine bereits installierte\n"
-"Mandrake Linux Version auf neueren Stand bringen wollen.\n"
-"\n"
-"Je nachdem, wieviel Erfahrung Sie mit GNU/Linux, können Sie sich für eines\n"
-"der folgenden Installations- oder Aktualisierungsarten für Ihr Mandrake\n"
-"Linux System entscheiden:\n"
-"\n"
-" * Empfehlenswert: Falls Sie noch nie ein GNU/Linux Betriebssystem\n"
-"installiert haben. Die Installation wird sehr einfach sein und es werden\n"
-"Ihnen nur sehr wenige Fragen gestellt werden.\n"
-"\n"
-" * Experte: Wenn Sie den Umgang mit GNU/Linux „im Schlaf“ beherrschen und\n"
-"hochgranulare Wahlmöglichkeiten wünschen, ist dies ihre\n"
-"Installationsmethode. Wie bei der benutzerdefinierten Installation können\n"
-"Sie die hauptsächliche Verwendung festlegen: „Arbeitsplatzrechner“,\n"
-"„Entwicklungsplattform“ oder „Server“. Seien Sie sehr vorsichtig, wenn Sie\n"
-"sich für diese Installationsklasse entscheiden. Die Antworten auf einige\n"
-"Fragen kann sehr schwierig sein und Auswirkungen auf Sicherheit und\n"
-"Stabilität Ihrer Distribution haben. Wählen Sie diese Installationsklasse\n"
-"also wirklich nur wenn Sie wissen, was Sie tun!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"„DrakX“ wird aufgrund Ihrer Sprachauswahl das für Sie passende\n"
-"Tastaturlayout bereits ausgewählt haben, Sie sollten diesen Schritt\n"
-"eigentlich nicht einmal angezeigt bekommen. Doch vielleicht sind Sie mit\n"
-"dieser Auswahl nicht zufrieden (wenn Sie beispielsweise eine vom Layout\n"
-"abweichende Sprache bevorzugen). Dann gehen Sie zu diesem\n"
-"Konfigurationsschritt zurück und wählen Sie ein passendes Layout aus der\n"
-"Liste.\n"
-"\n"
-"Sollten Sie eine andere als die zur gewählten Sprache gehörende Tastatur\n"
-"verwenden wollen, wählen Sie die Schaltfläche „Fortgeschritten“. Sie\n"
-"erhalten dann eine Liste aller unterstützten Tastaturen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-"Wählen Sie Ihre bevorzugte Sprache für den Installationsvorgang und\n"
-"Systemlaufzeit.\n"
-"\n"
-"Durch betätigen der Schaltfläche „Fortgeschritten“ erhalten Sie die\n"
-"Möglichkeit, weitere Sprachen auf Ihrem Rechner zu installieren, um diese\n"
-"später verwenden zu können. Wollen Sie etwa Spaniern muttersprachlichen\n"
-"Zugang zu Ihrem System erlauben, wählen Sie deutsch als Hauptsprache in der\n"
-"Liste und im Fortgeschrittenen-Bereich „Spanish|Spain“.\n"
-"\n"
-"Haben Sie eine Sprache markiert und die Wahl mit „OK“ bestätigt, gelangen\n"
-"Sie automatisch zum nächsten Schritt."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-"„DrakX“ übergeht diesen Schritt normalerweise. Sie müssen ihn explizit\n"
-"links im Menü anwählen. „DrakX“ behandelt Ihre Maus standardmäßig als\n"
-"Zwei-Tasten-Maus und emuliert die mittlere Taste. Es erkennt üblicherweise\n"
-"korrekt, ob es sich hierbei um eine PS/2-, eine serielle oder um eine\n"
-"USB-Maus handelt.\n"
-"\n"
-"Sollte dies nicht Ihren Vorstellungen entsprechen: Wählen Sie einfach Ihren\n"
-"Maustyp aus der Liste, die Ihnen angezeigt wird.\n"
-"\n"
-"Anschließend können Sie die Funktionstüchtigkeit Ihrer Maus überprüfen.\n"
-"Verwenden Sie auch die Knöpfe und gegebenenfalls das Mausrad, um\n"
-"sicherzustellen, dass die festgelegten Einstellungen funktionieren. Falls\n"
-"nicht, klicken Sie auf „Abbrechen“ und wählen einen anderen Treiber aus."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Bitte wählen Sie den richtigen Anschluss aus. Die COM1-Schnittstelle unter\n"
-"MS Windows wird beispielsweise unter Linux als „ttyS0“ bezeichnet."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Sie können nun das »root« Passwort für Ihr Mandrake Linux System eingeben.\n"
-"Das Passwort muss zweimal eingegeben werden, um sicher zu stellen, dass sie\n"
-"es korrekt eingegeben haben.\n"
-"\n"
-"»root« ist das Benutzerkennzeichen des Systemadministrators. Er ist der\n"
-"einzige der berechtigt ist, neue Software zu installieren, Systemdateien zu\n"
-"ändern oder neue Benutzerkennzeichen anzulegen. Kurz gesagt: »root« darf\n"
-"alles! Wählen Sie deshalb das Passwort sehr sorgfältig aus! Unberechtigter\n"
-"Zugang zu diesem Kennzeichen ist extrem gefährlich für die Integrität Ihres\n"
-"Systems und der darauf enthaltenen Daten. Daher müssen Sie auch ein\n"
-"Passwort auswählen, was nicht leicht zu erraten ist; „DrakX“ teilt Ihnen\n"
-"mit, wenn das Passwort zu einfach ist. Sie sehen, dass es auch möglich ist,\n"
-"kein Passwort zu vergeben. Wir raten Ihnen jedoch dringend davon ab!\n"
-"Glauben Sie nicht, dass nur, weil Sie GNU/Linux geladen haben, Ihre anderen\n"
-"Betriebssysteme vor Fehlern sicher sind. »root« hat keine Beschränkungen.\n"
-"Er könnte beispielsweise unbeabsichtigterweise alle Daten auf allen\n"
-"Partitionen löschen, weil er unvorsichtigerweise auf die Partitionen selber\n"
-"zugegriffen hat!\n"
-"\n"
-"Das Passwort sollte eine Mischung aus alphanumerischen Zeichen sein und\n"
-"mindestens 8 Zeichen lang sein. Es sollte niemals irgendwo aufgeschrieben\n"
-"werden.\n"
-"\n"
-"Machen Sie das Passwort aber nicht zu lang oder zu kompliziert: Sie sollten\n"
-"es sich ohne großen Aufwand merken können.\n"
-"\n"
-"Sie müssen das Passwort zweimal eingeben - ein Tippfehler beim ersten\n"
-"Versuch könnte sonst zu einem Problem werden, da Sie anschließend das\n"
-"„falsche“ Passwort bei der Verbindung mit dem System eingeben müssten.\n"
-"\n"
-"Im Expertenmodus werden Ihnen zusätzliche Optionen zur Verfügung gestellt.\n"
-"Diese hängen davon ab, ob Sie mit sich mit einem Authentifizierungsserver\n"
-"verbinden wollen oder nicht.\n"
-"\n"
-"Falls in Ihrem Netzwerk das LDAP (oder NIS) Protokoll für die\n"
-"Authentifizierung verwendet wird, wählen Sie bitte den entsprechenden\n"
-"Menüpunkt. Falls Sie nicht wissen, welches Protokoll Sie verwenden, fragen\n"
-"Sie Ihren Netzwerkadministrator.\n"
-"\n"
-"Falls Ihr Rechner nicht an einem administrierten Netzwerk hängt, wählen Sie\n"
-"bitte „Lokale Dateien“ zur Authentifizierung."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-"„LILO“ und „GRUB“ sind Betriebssystemstarter für GNU/Linux. Diese\n"
-"Installationsphase läuft in den meisten Fällen völlig automatisch ab.\n"
-"„DrakX“ analysiert den Boot-Sektor und ergreift dann die passenden\n"
-"Maßnahmen:\n"
-"\n"
-" * Findet „DrakX“ einen Windows-Boot-Sektor, ersetzt es ihn durch einen\n"
-"„GRUB“/„LILO“-Boot-Sektor. Sie erhalten dadurch die Möglichkeit, beim\n"
-"Systemstart zwischen Windows (bzw. anderen Betriebssystemen, sofern\n"
-"vorhanden) und GNU/Linux auszuwählen;\n"
-"\n"
-" * Findet „DrakX“ einen Linux-Bootsektor vor, ersetzt es ihn durch einen\n"
-"neuen;\n"
-"\n"
-"Im Zweifelsfall bietet „DrakX“ Ihnen einen Dialog mit verschiedenen\n"
-"Auswahlmöglichkeiten.\n"
-"\n"
-" * „Zu verwendender Betriebssystemstarter“: Hier erhalten Sie drei\n"
-"Alternativen:\n"
-"\n"
-"    * „LILO mit grafischem Menü“: Falls Sie „LILO“ mit seiner grafischen\n"
-"Oberfläche bevorzugen.\n"
-"\n"
-"    * „Grub“: Falls Sie „GRUB“ (Textmenü) bevorzugen.\n"
-"\n"
-"    * „LILO mit Textmenü“: Falls Sie „LILO“ mit Textmenü als Ihren "
-"Favoriten\n"
-"ansehen.\n"
-"\n"
-" * „Boot Gerät“: Normalerweise müssen Sie hier nichts ändern („/dev/hda“),\n"
-"Sie könnten jedoch den Starter auch auf der zweiten Platte installieren,\n"
-"(„/dev/hdb“) oder sogar auf einer Diskette („/dev/fd0“).\n"
-"\n"
-" * „Wartezeit vorm Starten des Standard Betriebssystems“: Wenn Sie Ihren\n"
-"Rechner neu starten erhalten Sie im Menü der zur Verfügung stehenden BSe\n"
-"eine gewisse Zeit um auszuwählen, was Sie starten möchten. Sollten Sie\n"
-"während dieser Zeit keine Wahl getroffen haben, wird Ihr Standard-BS\n"
-"gestartet.\n"
-"\n"
-"!! Machen Sie sich klar, dass Sie sich selbst darum kümmern müssen,\n"
-"irgendwie Ihr Mandrake Linux-System zu starten, wenn Sie hier keinen\n"
-"Betriebssystemstarter installieren (durch Auswahl von „Abbruch“). Stellen\n"
-"Sie auch sicher, dass Sie wissen was Sie tun, wenn Sie hier Einstellungen\n"
-"verändern... !!\n"
-"\n"
-"Durch wählen der Schaltfläche „Fortgeschritten“ erhalten Sie etliche\n"
-"Optionen, die dem fortgeschrittenen Anwender vorbehalten bleiben.\n"
-"\n"
-"Mandrake Linux installiert normalerweise seinen eigenen\n"
-"Betriebssystemstarter, der Sie sowohl GNU/Linux, als auch alle anderen\n"
-"installierten Betriebssysteme starten lässt.\n"
-"\n"
-"Sollte sich auf Ihrem Rechner bereits ein anderes Betriebssystem befinden,\n"
-"so wird dieses automatisch zu dem Startmenü hinzugefügt. Hier können Sie\n"
-"noch eine Feineinstellungen für die bestehenden Optionen vornehmen.\n"
-"Doppelklicken Sie auf einen bestehenden Eintrag und Sie können dessen\n"
-"Parameter ändern oder sogar den gesamten Eintrag löschen; „Hinzufügen“\n"
-"erzeugt einen neuen Eintrag und „Fertig“ bringt Sie zum nächsten\n"
-"Installationsschritt."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"„LILO“ (der LInux LOader) und „GRUB“ sind Betriebssystemstarter: Diese\n"
-"Programme starten entweder GNU/Linux oder die anderen Betriebssysteme, die\n"
-"auf Ihrem Rechner vorhanden sind. Normalerweise erkennen diese Werkzeuge\n"
-"alle existierenden Betriebssysteme korrekt und bieten Sie als\n"
-"Startalternativen an. Ist dies einmal nicht der Fall, können Sie hier\n"
-"manuell helfend eingreifen. Seien Sie jedoch vorsichtig, dass sie die\n"
-"korrekten Parameter eingeben.\n"
-"\n"
-"Eventuell möchten Sie anderen Anwendern nicht die Möglichkeit geben, diese\n"
-"anderen Betriebssysteme zu verwenden, in diesem Fall können Sie den\n"
-"entsprechenden Eintrag einfach löschen. Das hat jedoch zur Folge, dass sie\n"
-"eine Startdiskette benötigen, um diese Betriebssysteme in Zukunft starten\n"
-"zu können."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Sie müssen nun entscheiden, wo die Informationen zum Starten Ihrer\n"
-"GNU/Linux Distribution erstellt werden sollen.\n"
-"\n"
-"Sofern Sie nicht genau wissen, was sie machen sollen, wählen Sie „Erster\n"
-"Sektor der Platte (MBR)“"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Sie können nun ein Drucksystem wählen. Wo andere Betriebssysteme Ihnen nur\n"
-"eins bieten, bietet Mandrake Linux Ihnen drei:\n"
-"\n"
-" * „pdq“ - Es steht für „print, don't queue“ (engl. für „Drucken ohne\n"
-"Warteschlange“). Falls Sie einen Drucker haben, der direkt an Ihrem Rechner\n"
-"hängt und Sie keine Netzwerkdrucker verwenden wollen, ist dies das\n"
-"Drucksystem Ihrer Wahl. Es kann zwar auch mit Netzwerkdruckern umgehen, ist\n"
-"dabei aber extrem langsam. Wähen Sie „pdq“, wenn Sie ein GNU/Linux Neuling\n"
-"sind. Sie können diese Wahl später immer wieder ändern, indem Sie\n"
-"PrinterDrake im Mandrake Kontrollzentrum starten und dort die Schaltfläche\n"
-"„Expertenmodus“ betätigen.\n"
-"\n"
-" * „CUPS“ - Mit dem „Common Unix Printing System“ (engl. für „Allgemeines\n"
-"Unix-Drucksystem“) können Sie ebenso gut um auf Ihrem direkt\n"
-"angeschlossenen Drucker drucken, wie auf einem Drucker, der an einem Server\n"
-"auf der anderen Seite der Welt hängt. Es ist seinfach zu bedienen und kann\n"
-"sowohl als Server oder als Klient für das alte „lpd“-Drucksystem verwendet\n"
-"werden - Es ist also rückwärtskompatibel. Es ist sehr mächtig, in seiner\n"
-"Grundeinstellung verhält es sich jedoch genau wie „pdq“. Wenn Sie einen\n"
-"„lpd“ Server benötigen, müssen Sie einfach nur den „cups-lpd“ Dämon\n"
-"starten. „CUPS“ bietet grafische Konfigurations- und Druckmenüs.\n"
-"\n"
-" * „lprNG“ - „line printer daemon New Generation“ (engl. für\n"
-"„Zeilendrucker-Dämon - Neue Generation“). Dieses System bietet etwas das\n"
-"gleiche, was die beiden vorherigen können, es erlaubt Ihnen jedoch auch auf\n"
-"Drucker in Novell Netzwerken zuzugreifen, das es das IPX Protokoll\n"
-"beherrscht. Falls Sie das benötigen, verwenden Sie lprNG. Andernfalls ist\n"
-"„CUPS“ vorzuziehen, das es benutzerfreundlicher ist und in\n"
-"Nicht-IPX-Netzwerken besser funktioniert."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"„DrakX“ versucht nun alle IDE Festplatten Ihres Systems zu finden. Unter\n"
-"Anderem sucht „DrakX“ auch nach PCISCSI-Karten, die es kennt, um sie\n"
-"automatisch mit dem richtigen Treiber einzubinden.\n"
-"\n"
-"Falls Sie über keinen SCSI Adapter verfügen, es sich um einen ISASCSI\n"
-"Adapter handelt oder um einen PCISCSI Adapter, bei dem „DrakX“ nicht weiß,\n"
-"welcher Treiber funktioniert, werden Sie gebeten, „DrakX“ zu helfen.\n"
-"\n"
-"Ist in Ihrem Rechner kein SCSI Adapter, wählen Sie einfach „Nein“. Sollten\n"
-"Sie Sich für „Ja“ entscheiden, erscheint eine Liste, aus der Sie Ihren\n"
-"Adapter auswählen können.\n"
-"\n"
-"Mussten Sie den Adapter aus der Liste wählen, fragt „DrakX“ Sie, ob Sie dem\n"
-"Modul Optionen übergeben wollen. Sie können „DrakX“ ruhig erlauben, erst\n"
-"einmal selbst zu versuchen, diese herauszufinden. In den meisten Fällen\n"
-"funktioniert das.\n"
-"\n"
-"Falls nicht, müssen Sie die Optionen angeben. Schauen Sie im\n"
-"Installationshandbuch, wie Sie diese Informationen erhalten können: etwa\n"
-"unter Windows (sofern das auf Ihren Rechner installiert ist), aus den\n"
-"Handbüchern, die sie mit dem Adapter erhalten haben oder von den Web-Seiten\n"
-"des Hardware-Anbieters (sofern Sie einen WWW-Zugang haben)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Sie können weitere „Yaboot“ einträge angeben, etwa für andere\n"
-"Betriebssysteme, alternative Kerne oder ein Rettungssystem.\n"
-"\n"
-"Für ein anderes BS können Sie nur einen Namen und die Start-Partition\n"
-"angeben.\n"
-"\n"
-"Für Linux gibt es einige Parameter:\n"
-"\n"
-" * „Identifikator“: Es handelt sich um den Namen, den Sie an der „Yaboot“\n"
-"Eingabeaufforderung angeben müssen, um diese Alternative zu wählen.\n"
-"\n"
-" * „Kern“: Der Name des BS-Kerns, den sie starten wollen. Normalerweise\n"
-"handelt es sich um „vmlinuz“ oder eine Variante von „vmlinuz“ mit einer\n"
-"Versionsnummer.\n"
-"\n"
-" * „Verzeichnisbaumwurzel“: Die Verzeichnisbaumwurzel „/“ Ihrer Linux\n"
-"Installation.\n"
-"\n"
-" * „Übergeben“: Auf Apple Hardware, wird die Übergabemöglichkeit weiterer\n"
-"Kernparameter häufig verwendet, um die Grafikausgabe richtig zu\n"
-"konfigurieren oder die Tastaturemulation der Mausknöpfe einzuschalten, da\n"
-"klassische Apple-Mäuse von Hause aus mit 2 fehlenden Maustasten\n"
-"ausgeliefert werden. Hier einige Beispiele:\n"
-"\n"
-"   video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"   video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * „Init-RamDisk“: Dieser Parameter kann entweder verwendet werden, um beim\n"
-"Betriebssystemstart bereits zusätzliche Kern-Module zur Verfügung zu haben,\n"
-"ohne dass das Start-Gerät zur Verfügung steht oder um ein RamDisk Abbild\n"
-"für den BS-Start in Notfällen zur Verfügung zu haben.\n"
-"\n"
-" * „Größe der Init-RamDisk“: Standardmäßig ist eine RamDisk 4096 Bytes "
-"groß.\n"
-"Sollten Sie eine größere RamDisk benötigen, können Sie das mit diesem\n"
-"Parameter einstellen.\n"
-"\n"
-" * „Schreiben/Lesen“: Normalerweise wird die Verzeichnisbaumwurzel zuerst "
-"im\n"
-"Nur-Lese-Modus eingehängt, um eine Dateisystem Verifikation durchführen zu\n"
-"können, bevor das Betriebssystem seinen Dienst aufnimmt. Diesen Umstand\n"
-"können Sie hier abstellen.\n"
-"\n"
-" * „NoVideo“: Sollte sich die Apple Grafik-Hardware als extrem "
-"problematisch\n"
-"erweisen, können Sie diesen Parameter verwenden um im sog. „novideo“-Modus,\n"
-"also im FrameBuffer-Modus zu starten.\n"
-"\n"
-" * „Standard“: Wählt diesen Eintrag als Standard Linux-Kern, den Sie durch\n"
-"drücken von [Enter] an der „Yaboot“ Eingabeaufforderung gestartet bekommen.\n"
-"Wenn Sie die [Tab]-Taste an der Eingabeaufforderung drücken, erhalten Sie\n"
-"eine Liste der verfügbaren Alternativen. Der Standardeintrag wird mit einem\n"
-"Stern „*“ markiert."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"„Yaboot“ ist ein BS-Starter für NewWorld MacIntosh Rechner. Er kann sowohl\n"
-"GNU/Linux als auch MacOS oder MacOS X starten, falls diese auf Ihrem\n"
-"Rechner installiert sind. Normalerweise werden diese Betriebssysteme alle\n"
-"automatisch gefunden und eingebunden. Sollte dies nicht der Fall sein,\n"
-"können Sie diese hier manuell hinzufügen. Stellen Sie jedoch sicher, die\n"
-"richtigen Parameter zu verwenden.\n"
-"\n"
-"Die Hauptparameter von „Yaboot“ sind:\n"
-"\n"
-" * „Init Nachricht“: Ein Text, der vor der Eingabeaufforderung angezeigt\n"
-"wird.\n"
-"\n"
-" * „Boot Gerät“: Hiermit wird angegeben, wohin die Informationen zum "
-"Starten\n"
-"Ihres GNU/Linux Systems geschrieben werden sollen. Sie sollten in einem\n"
-"früheren Schritt bereits eine Boot-Partition angelegt haben, um diese Daten\n"
-"zu beherbergen.\n"
-"\n"
-" * „Open Firmware Verzögerung“: Im Gegensatz zu „LILO“, stehen mit „Yaboot“\n"
-"zwei Verzögerungen zur Verfügung. Die erste Verzögerung wird in Sekunden\n"
-"angegeben und dient zur Auswahl zwischen CD, OF Boot, MacOS oder Linux.\n"
-"\n"
-" * „BS-Startverzögerung für den Kern“: Diese Verzögerung entspricht der\n"
-"„LILO“ Start-Verzögerung. Sie haben nach der Auswahl von GNU/Linux diese\n"
-"Verzögerung (in 0,1 Sekunden Schritten) Zeit, bis der Standardkern geladen\n"
-"wird.\n"
-"\n"
-" * „BS-Start von CD erlauben“: Markieren dieses Punkts erlaubt es Ihnen an\n"
-"der ersten Eingabeaufforderung „C“ für den Start von CD zu wählen.\n"
-"\n"
-" * „Open Firmware Start erlauben“: Markieren dieses Punkts erlaubt es Ihnen\n"
-"an der ersten Eingabeaufforderung „N“ für den Open Firmware Start zu\n"
-"wählen.\n"
-"\n"
-" * „Standard BS“: Hiermit stellen Sie ein, welches Betriebssystem nach\n"
-"Ablauf der Open Firmware Verzögerung automatisch gestartet werden soll."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-"Hier bekommen Sie verschiedene Parameter Ihres Systems angezeigt. Je nach\n"
-"vorhandener Hardware sehen Sie hier (oder eben nicht) folgende Einträge:\n"
-"\n"
-" * „Maus“: Maus Kontrollieren Sie die konfigurierte Maus und betätigen Sie,\n"
-"falls notwendig, die Schaltfläche.\n"
-"\n"
-" * „Tastatur“: Tastatur Kontrollieren Sie die aktuelle Tastaturvorgabe und\n"
-"wählen Sie die Schaltfläche, falls Sie die Vorgabe ändern wollen.\n"
-"\n"
-" * „Zeitzone“: Zeitzone„DrakX“ versucht die Zeitzone anhand der gewählten\n"
-"Sprache zu „erraten“. Es ist jedoch möglich, dass Sie sich nicht in dem\n"
-"Land befinden, das die vorgegebene Sprache erahnen lässt. In diesem Fall\n"
-"sollten Sie die Schaltfläche anwählen, um die Uhr entsprechend Ihrer\n"
-"lokalen Zeitzone zu setzen.\n"
-"\n"
-" * „Drucker“: Durch Anwahl der Schaltfläche „Kein Drucker“ starten Sie den\n"
-"Druckerassistenten.\n"
-"\n"
-" * „Soundkarte“: Falls eine Soundkarte in Ihrem Rechner gefunden wurde, "
-"wird\n"
-"sie hier angezeigt. Es ist jedoch keine Änderung während der Installation\n"
-"möglich.\n"
-"\n"
-" * „TV-Karte“: Falls eine TV-Karte in Ihrem Rechner gefunden wurde, wird "
-"sie\n"
-"hier angezeigt. Es ist jedoch keine Änderung während der Installation\n"
-"möglich.\n"
-"\n"
-" * „ISDN Karte“: Falls eine ISDN Karte in Ihrem Rechner gefunden wurde, "
-"wird\n"
-"sie hier angezeigt. Durch Anwahl der Schaltfläche können Sie die Parameter\n"
-"ändern."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Wählen Sie die Festplatte, die sie löschen wollen, um Ihre neue Mandrake\n"
-"Linux Distribution darauf zu installieren. Achtung: Alle darauf\n"
-"befindlichen Daten gehen bei diesem Schritt unwiederbringlich verloren!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Wählen Sie „OK“, wenn Sie alle Partitionen (damit auch alle Daten) dieser\n"
-"Festplatte löschen wollen. Achtung: durch betätigen dieser Schaltfläche\n"
-"werden alle Daten auf der Festplatte unwiederbringlich gelöscht (auch alle\n"
-"evtl. vorhandenen Windows(TM)-Daten)!\n"
-"\n"
-"Wählen Sie „Abbruch“, um die vorhandenen Daten unangetastet zu lassen und\n"
-"die Operation abzubrechen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-"Ich kann nicht auf die Kernmodule, Ihres Kerns zugreifen (Die Datei %s "
-"fehlt)."
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Sie haben die folgenden Server ausgewählt: %s\n"
-"\n"
-"\n"
-"Diese Server werden standardmäßig aktiviert. Sie haben keine bekannten\n"
-"Sicherheitsprobleme, es können jedoch irgendwann welche gefunden werden.\n"
-"In diesem Fall müssen Sie sicherstellen, dass Sie so schnell wie möglich\n"
-" eine Paketaktualisierung vornehmen.\n"
-"\n"
-"\n"
-"Wollen Sie diese Server wirklich installieren?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-"Ich kann kein Broadcast machen,\n"
-"da keine NIS Domäne angegeben wurde"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Legen Sie eine leere, FAT formatierte Diskette in Laufwerk %s ein."
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Diese Diskette ist nich FAT formatiert"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Um diese gespeicherte Paketauswahl zu verwenden, starten Sie die \n"
-"Installation bitte mit: „boot defcfg=floppy“"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fehler beim Lesen der Datei %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "OK"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Einige Hardware Komponenten Ihres Rechners benötigen „proprietäre“\n"
-"Treiber. Weitere Infos hierzu finden Sie unter: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Sie brauchen eine Verzeichnisbaumwurzel.\n"
-"Erzeugen Sie eine Partition (oder klicken Sie auf eine existierende).\n"
-"Wählen Sie „Einhängpunkt“ und setzen Sie ihn auf „/“"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Sie benötigen eine Auslagerungspartition"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Sie haben keine Auslagerungspartition\n"
-"\n"
-"Wollen Sie trotzdem fortfahren?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Sie müssen eine FAT Partition in „/boot/efi“ eingehängt haben."
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Freien Platz verwenden"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nicht genug freier Platz, um die neue Partition anlegen zu können."
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Verwende existierende"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Es gibt keine existierende Partition, die ich verwenden kann."
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Auf der Windows Partition Loopbacks anlegen"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Auf welche Partition wollen Sie Linux4Win installieren?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Wählen Sie die Größen"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Größe der Verzeichnisbaumwurzel-Partition in MB: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Größe der Auslagerungspartition in MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Den freien Platz der Windows Partition verwenden"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Bei welcher Partition wollen Sie die Größe ändern?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Errechne die Grenzen des Windows Dateisystems"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Das Werkzeug zum Verändern der FAT Partitionsgröße kann mit der \n"
-"Partition nicht arbeiten. Folgender Fehler trat auf:\n"
-"%s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Ihre Windows-Partition ist zu sehr fragmentiert.\n"
-"Starten Sie bitte erst „defrag“ unter Windows."
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"WARNUNG!\n"
-"\n"
-"DrakX wird nun die Größe Ihrer Windows Partition verändern.\n"
-"Seien Sie Vorsichtig: Diese Aktion ist gefährlich. Falls Sie es noch\n"
-"nicht getan haben, sollten Sie nun die Installation abbrechen, um\n"
-"scandisk (sowie möglicherweise defrag) unter Windows auf die Partition \n"
-"anzuwenden. Anschließend können Sie die Installation erneut starten.\n"
-"Sie sollten natürlich generell Sicherheitskopien Ihrer Daten angelegt\n"
-"haben. Falls dies der Fall ist, können Sie mit OK fortfahren."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Wieviel Platz benötigen sie noch für Windows auf"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "Partition %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT Größenanpassung schlug Fehl: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Sie haben keine FAT Partition, deren Größe ich anpassen kann, bzw. die\n"
-"ich als Loopback verwenden kann (möglicherweise haben Sie auch einfach\n"
-"nur nichtmehr genügend freien Speicher)."
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Komplette Platte löschen"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Windows(TM) löschen"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Sie haben mehr als eine Festplatte.\n"
-"Auf welche soll GNU/Linux installiert werden?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"SÄMTLICHE existierende Partitionen samt der derauf befindlichen Daten \n"
-"auf Laufwerk %s gehen dabei verloren"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Benutzerdefinierte Partitionierung"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Fdisk verwenden"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Sie können nun %s partitionieren.\n"
-"Vergessen Sie nicht die Einstellungen mittels ,w` zu speichern, \n"
-"sobald Sie fertig sind."
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Sie haben nicht genug freien Platz auf Ihrer Windows Partition."
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Ich finde nicht genug Platz für die Installation."
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Der DrakX Partitionierungsassistent fand folgende Lösung:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Das Partitionieren schlug Fehl: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Netzwerkverbindung herstellen"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Netzwerkverbindung trennen"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Es trat ein Fehler auf. Ich weiß jedoch nicht, wie ich damit sinnvoll \n"
-"umgehen soll. Sie können fortfahren, jedoch auf eigenes Risiko!"
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Den Einhängpunkt %s kopieren"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Einige wichtige Pakete wurden nicht richtig installiert. \n"
-"Entweder ist Ihr CD-ROM-Laufwerk oder Ihre CD-ROM defekt. \n"
-"Testen Sie die CD-ROM auf einem Linux-Rechner mittels „rpm -qpl \n"
-"Mandrake/rpms/*.rpm“\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Willkommen auf %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Kein Disketten-Laufwerk verfügbar"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Beginn von Schritt „%s“\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Wählen Sie die Menge die Sie installieren wollen"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Gesamtgröße: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Version: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Größe: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Zu installierende Pakete auswählen"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Info"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Installation"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Installation wird durchgeführt"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Bitte warten, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Verbleibende Zeit "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Gesamtzeit "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Installation vorbereiten"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Installation des Pakets %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Wollen Sie trotzdem fortfahren?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Bei der Anforderung folgender Pakete trat ein Fehler auf:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Wollen Sie die existierende X11 Konfiguration verwenden?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Ihr Rechner hat nicht genug Ressourcen. Vermutlich werden bei der \n"
-"Installation Probleme auftreten. In diesem Fall sollten Sie eine \n"
-"Text-Installation versuchen. Drücken Sie dafür <F1> während dem \n"
-"Installationsstart und geben Sie „text“ an der Eingabeaufforderung \n"
-"ein."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Installationsart"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Bitte wählen Sie eine der folgenden Installationsklassen:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Die Gesamtgröße der zu installierenden Pakete beträgt etwa %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Falls Sie weniger als diese Menge installieren wollen, \n"
-"geben Sie (in Prozent) an, wie viele Pakete Sie installieren wollen.\n"
-"\n"
-"Ein geringer Prozentsatz installiert nur die wichtigsten Pakete;\n"
-"100%% installiert alle ausgewählten Pakete."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Sie haben nur Platz für %d%% der ausgewählten Pakete. \n"
-"\n"
-"Falls Sie weniger als diese Menge installieren wollen, \n"
-"geben Sie (in Prozent) an, wie viele Pakete Sie installieren wollen.\n"
-"Ein geringer Prozentsatz installiert nur die wichtigsten Pakete;\n"
-"%d%% installiert so viele Pakete wie möglich."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Im nächsten Schritt können Sie genauer auswählen"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Prozent der zu installierenden Pakete"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Auswahl der Paketgruppen"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Individuelle Paketauswahl"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Gesamtgröße: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Ungültiges Paket"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Name: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Wichtigkeit: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Sie können dieses Paket nicht auswählen, da Sie nicht genug Plattenplatz "
-"haben."
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Die folgenden Pakete werden installiert werden"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Die folgenden Pakete werden entfernt"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Sie können dieses Paket nicht auswählen/es aus der Auswahl entfernen."
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dieses Paket ist existenziell, sie können es nicht deselektieren"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-"Sie können dieses Paket nicht aus der Auswahl entfernen. \n"
-"Es ist bereits installiert!"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Dieses Paket muss aktualisiert werden.\n"
-"Sind Sie sicher, dass Sie es aus der Auswahl entfernen wollen?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-"Sie können dieses Paket nicht aus der Auswahl entfernen. \n"
-"Es muss aktualisiert werden!"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Anzeige automatisch markierter Pakete"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Laden von/Speichern auf Diskette"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "Erneuere Paket Auswahl"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "Minimal-Installation"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Schätzung"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Bitte warten, bereite Installation vor"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d Pakete"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Achtung\n"
-"\n"
-"Bitte lesen Sie die nachfolgenden Ausführungen sorgfältig. Wenn Sie mit\n"
-"irgendeinem Teil nicht einverstanden sind, dürfen Sie nicht den Inhalt\n"
-"der folgenden CDs installieren. Klicken Sie auf „Zurückweisen“, um die\n"
-"Installation ohne Verwendung dieser CDs fortzusetzen.\n"
-"\n"
-"\n"
-"Einige Komponenten auf den nachfolgenden CDs unterliegen nicht der GPL\n"
-"oder ähnlichen Lizenzabkommen. Jede dieser Komponenten unterliegt dann\n"
-"den Bedingungen ihrer eigenen spezifischen Lizenz.\n"
-"Bitte lesen Sie diese Lizenzen sorgfältig und nur wenn Sie mit ihnen\n"
-"einverstanden sind, dürfen Sie die entsprechenden Produkte entsprechend\n"
-"ihrer Lizenz benutzen und weitergeben.\n"
-"Solche Lizenzen verbieten im allgemeinen das Transferieren, Duplizieren\n"
-"(außer für Sicherheitskopien), Weitergeben, Decompilieren, Disassamblen\n"
-"oder Verändern der Komponente.\n"
-"Jeder Bruch des Lizenzabkommens beendet sofort die Ihnen im Rahmen der\n"
-"Lizenz eingeräumten Rechte. Wenn die jeweilige Lizenz Ihnen nicht\n"
-"entsprechende Rechte einräumt, dürfen Sie die Programme nicht auf mehr\n"
-"als einem System installieren oder zur Benutzung in einem Netzwerk\n"
-"einrichten. Im Zweifelsfall kontaktieren Sie bitte den Vertreiber oder\n"
-"Herausgeber der jeweiligen Komponente.\n"
-"Transfer an Dritte oder Kopieren solcher Komponenten inklusive ihrer\n"
-"Dokumentation ist normalerweise verboten.\n"
-"\n"
-"\n"
-"Alle Rechte an den Komponenten der nachfolgenden CDs liegen bei den\n"
-"jeweiligen Autoren und sind durch die Urheberrechtsgesetze für\n"
-"Softwareprodukte geschützt.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Akzeptieren"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Zurückweisen"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Bitte wechseln Sie die CD!\n"
-"\n"
-"Bitte legen Sie die CD-ROM „%s“ in Ihr Laufwerk,\n"
-"dann drücken Sie OK.\n"
-"Falls Sie sie nicht vorlegen haben, drücken Sie Abbruch."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Bei der Installation der Pakete trat ein Fehler auf:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Es ist ein Fehler aufgetreten"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Lizenz"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Bei dieser Ãœbersetzung handelt es sich um eine inoffizielle Ãœbersetzung\n"
-"der Mandrake Linux-Lizenz in die deutsche Sprache. Sie ist keine\n"
-"rechtsverbindliche Darstellung der Lizenzbedingungen der Software in\n"
-"dieser Distribution - nur der ursprüngliche französische Text der\n"
-"Mandrake Linux Lizenz ist rechtsverbindlich. Wir hoffen aber, dass diese\n"
-"Übersetzung den deutschsprechenden Benutzern das Verständnis dieser\n"
-"Lizenz erleichtert.\n"
-"\n"
-"\n"
-"Einführung\n"
-"\n"
-"Das Betriebssystem und die anderen Komponenten, die in Mandrake Linux\n"
-"enthalten sind, werden hier „Software-Produkte“ genannt. Die\n"
-"Software-Produkte umfassen, aber sind nicht beschränkt auf, die\n"
-"Gesamtheit der Programme, Methoden, Regeln, und Dokumentation, welche\n"
-"zum Betriebssystem und den anderen Komponenten der Mandrake Linux\n"
-"Distribution gehören.\n"
-"\n"
-"\n"
-"1. Lizenzabkommen\n"
-"\n"
-"Bitte lesen Sie dieses Dokument sorgfältig. Dieses Dokument ist ein\n"
-"Lizenzabkommen zwischen Ihnen und MandrakeSoft S. A. welches sich auf\n"
-"die Software-Produkte bezieht.\n"
-"Durch Installation, Duplizierung oder Benutzung der Software-Produkte in\n"
-"irgendeiner Art und Weise erklären Sie sich mit den Bedingungen dieser\n"
-"Lizenz einverstanden.\n"
-"Wenn Sie mit irgendeinem Punkt dieser Lizenz nicht einverstanden sind,\n"
-"ist es Ihnen nicht erlaubt, die Software-Produkte zu installieren,\n"
-"duplizieren oder zu benutzen.\n"
-"Mit jedem Versuch, die Software-Produkte in einer Art und Weise zu\n"
-"benutzen, die nicht den Bedingungen dieser Lizenz entspricht, verlieren\n"
-"Sie die Ihnen mit dieser Lizenz eingeräumten Rechte. In diesem Fall\n"
-"haben Sie unverzüglich alle Kopien der Software-Produkte zu vernichten.\n"
-"\n"
-"\n"
-"2. Eingeschränkte Garantie\n"
-"\n"
-"Die Software-Produkte und die beigefügte Dokumentation werden dem\n"
-"Benutzer lediglich zur Verfügung gestellt, es wird keinerlei Garantie\n"
-"gegeben soweit es gesetzlich zulässig ist.\n"
-"MandrakeSoft S. A. haftet unter keinen Umständen, soweit gesetzlich\n"
-"zulässig, für direkte oder indirekte Schäden irgendwelcher Art,\n"
-"(inklusive uneingeschränkt Schäden aufgrund Verlust von\n"
-"Geschäftsbeziehungen, Unterbrechung von Geschäftsvorgängen,\n"
-"finanziellen Verlust, Gebühren oder Strafen aufgrund gerichtlicher\n"
-"Entscheide, oder jegliche Folgeschäden) die aufgrund der Benutzung oder\n"
-"der Unmöglichkeit der Benutzung der Software-Produkte entstehen, auch\n"
-"wenn MandrakeSoft S. A. über die Möglichkeit und das Auftreten\n"
-"derartiger Schäden unterrichtet wurde.\n"
-"\n"
-"\n"
-"EINGESCHRÄNKTE VERANTWORTLICHKEIT BEZOGEN AUF DEN BESITZ UND DIE\n"
-"BENUTZUNG VON SOFTWARE, DIE IN EINIGEN LÄNDERN VERBOTEN IST.\n"
-"\n"
-"\n"
-"Soweit gesetzlich zulässig, haften MandrakeSoft S. A. und deren\n"
-"Vertreiber unter keinen Umständen für direkte oder indirekte Schäden\n"
-"irgendwelcher Art, (inklusive uneingeschränkt Schäden aufgrund Verlust\n"
-"von Geschäftsbeziehungen, Unterbrechung von Geschäftsvorgängen,\n"
-"finanziellen Verlust, Gebühren oder Strafen aufgrund gerichtlicher\n"
-"Entscheide, oder jegliche Folgeschäden) die aufgrund des Besitzes und\n"
-"der Benutzung von Software-Komponenten oder aufgrund des Ladens von\n"
-"Software-Komponenten von den Internet-Servern von MandrakeSoft S. A.,\n"
-"deren Besitz und Benutzung in einigen Ländern aufgrund lokaler Gesetze\n"
-"nicht gestattet ist, entstehen.\n"
-"Diese Einschränkung der Verantwortlichkeit bezieht sich auch, aber nicht\n"
-"nur, auf die Komponenten für starke Kryptografie enthalten in den\n"
-"Software-Produkten.\n"
-"\n"
-"\n"
-"3. Die GPL und verwandte Lizenzen\n"
-"\n"
-"Die Software-Produkte bestehen aus Komponenten, die von verschiedenen\n"
-"Personen und Einrichtungen erstellt wurden. Die meisten Komponenten\n"
-"unterliegen den Bedingungen der GNU General Public License, im folgenden\n"
-"„GPL“ genannt, oder ähnlichen Lizenzen. Die meisten dieser Lizenzen\n"
-"erlauben es, die Komponenten, die diesen Lizenzen unterliegen, zu\n"
-"benutzen, zu duplizieren, anzupassen, und weiterzugeben. Bitte lesen sie\n"
-"sorgfältig die Bedingungen der Lizenzabkommen von jeder Komponente,\n"
-"bevor Sie sie benutzen. Jegliche Frage zur Lizenz einer Komponente ist an\n"
-"den Autor der Komponente und nicht an MandrakeSoft S. A. zu richten. Die\n"
-"von MandrakeSoft S. A. erstellten Programme unterliegen der GPL.\n"
-"Von MandrakeSoft S. A. geschriebene Dokumentation unterliegt einer\n"
-"spezifischen Lizenz. Bitte lesen Sie die Dokumentation für weitere\n"
-"Details.\n"
-"\n"
-"\n"
-"4. Geistiges Eigentum\n"
-"\n"
-"Alle Rechte an den Komponenten der Software-Produkte liegen bei den\n"
-"entsprechenden Autoren und sind durch die Urheberrechtsgesetze für\n"
-"Softwareprodukte geschützt.\n"
-"MandrakeSoft S. A. behält sich das Recht vor, die Software-Produkte zu\n"
-"modifizieren und anzupassen.\n"
-"„Mandrake“, „Mandrake Linux“ und entsprechende Logos sind eingetragene\n"
-"Warenzeichen der MandrakeSoft S. A..\n"
-"\n"
-"\n"
-"5. Gesetzliche Bestimmungen\n"
-"\n"
-"Wenn irgendein Teil dieses Lizenzabkommens durch einen Gerichtsentscheid\n"
-"für ungültig, illegal oder inakzeptabel erklärt wird, wird dieser Teil\n"
-"aus dem Abkommen ausgeschlossen. Sie bleiben weiterhin an die anderen,\n"
-"anwendbaren Teile gebunden.\n"
-"Die Bedingungen dieses Lizenzabkommens unterliegen den Gesetzen von\n"
-"Frankreich. Alle Unstimmigkeiten bezüglich der Bedingungen dieser Lizenz\n"
-"werden vorzugsweise außergerichtlich beigelegt. Letztes Mittel ist das\n"
-"zuständige Gericht in Paris, Frankreich.\n"
-"Zu jeglicher Frage zu diesem Dokument kontaktieren Sie bitte\n"
-"MandrakeSoft S. A..\n"
-"Introduction\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"Hier die französche Version:\n"
-"\n"
-"Le système d'exploitation et les divers composants disponibles dans la \n"
-"distribution Mandrake Linux sont ci-après dénommés ensemble les \n"
-"« Logiciels ». Les Logiciels comprennent notamment, mais de façon non \n"
-"limitative, l'ensemble des programmes, procédés, règles et documentations \n"
-"relatifs au système d'exploitation et aux divers composants de la \n"
-"distribution Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Licence\n"
-"\n"
-"Veuillez lire attentivement le présent document. Ce document constitue \n"
-"un contrat de licence entre vous (personne physique ou personne morale) et \n"
-"MandrakeSoft S.A. portant sur les Logiciels.\n"
-"Le fait d'installer, de reproduire ou d'utiliser les Logiciels de quelque \n"
-"manière que ce soit indique que vous reconnaissez avoir préalablement eu \n"
-"connaissance et que vous acceptez de vous conformer aux termes et "
-"conditions \n"
-"du présent contrat de licence. En cas de désaccord avec le présent "
-"document \n"
-"vous n'êtes pas autorisé à installer, reproduire et utiliser de quelque \n"
-"manière que ce soit ce produit.\n"
-"Le contrat de licence sera résilié automatiquement et sans préavis dans le \n"
-"cas où vous ne vous conformeriez pas aux dispositions du présent document. \n"
-"En cas de résiliation vous devrez immédiatement détruire tout exemplaire "
-"et \n"
-"toute copie de tous programmes et de toutes documentations qui constituent \n"
-"le système d'exploitation et les divers composants disponibles dans la \n"
-"distribution Mandrake Linux.\n"
-"\n"
-"\n"
-"2. Garantie et limitations de garantie\n"
-"\n"
-"Les Logiciels et la documentation qui les accompagne sont fournis en "
-"l'état \n"
-"et sans aucune garantie. MandrakeSoft S.A. décline toute responsabilité \n"
-"découlant d'un dommage direct, spécial, indirect ou accessoire, de quelque \n"
-"nature que ce soit, en relation avec l'utilisation des Logiciels, "
-"notamment \n"
-"et de façon non limitative, tout dommage entraîné par les pertes de \n"
-"bénéfices, interruptions d'activité, pertes d'informations commerciales ou \n"
-"autres pertes pécuniaires, ainsi que des éventuelles condamnations et \n"
-"indemnités devant être versées par suite d'une décision de justice, et ce \n"
-"même si MandrakeSoft S.A. a été informée de la survenue ou de \n"
-"l'éventualité de tels dommages.\n"
-"\n"
-"AVERTISSEMENT QUANT A LA DETENTION OU L'UTILISATION DE LOGICIELS \n"
-"PROHIBES DANS CERTAINS PAYS \n"
-"\n"
-"En aucun cas, ni MandrakeSoft S.A. ni ses fournisseurs ne pourront être \n"
-"tenus responsable à raison d'un préjudice spécial, direct, indirect ou \n"
-"accessoire, de quelque nature que ce soit (notamment et de façon non \n"
-"limitative les pertes de bénéfices, interruptions d'activité, pertes \n"
-"d'informations commerciales ou autres pertes pécuniaires, ainsi que \n"
-"des éventuelles condamnations et indemnités devant être versées par suite \n"
-"d'une décision de justice) qui ferait suite à l'utilisation, la détention \n"
-"ou au simple téléchargement depuis l'un des sites de téléchargement de \n"
-"Mandrake Linux de logiciels prohibés par la législation à laquelle vous \n"
-"êtes soumis. Cet avertissement concerne notamment certains logiciels de \n"
-"cryptographie fournis avec les Logiciels.\n"
-"\n"
-"\n"
-"3. Licence GPL et autres licences\n"
-"\n"
-"Les Logiciels sont constitués de modules logiciels créés par diverses \n"
-"personnes (physiques ou morales). Nombre d'entre eux sont distribués sous \n"
-"les termes de la GNU General Public Licence (ci-après dénommée « GPL ») ou \n"
-"d'autres licences similaires. La plupart de ces licences vous permettent \n"
-"de copier, d'adapter ou de redistribuer les modules logiciels qu'elles \n"
-"régissent. Veuillez lire et agréer les termes et conditions des licences \n"
-"accompagnant chacun d'entre eux avant de les utiliser. Toute question \n"
-"concernant la licence de chaque Logiciel est à soumettre à l'auteur (ou \n"
-"ses représentants) du Logiciel et non à MandrakeSoft. \n"
-"Les programmes conçus par MandrakeSoft sont régis par la licence GPL. \n"
-"La documentation rédigée par MandrakeSoft fait l'objet d'une licence \n"
-"spécifique. Veuillez vous référez à la documentation pour obtenir plus \n"
-"de précisions.\n"
-"\n"
-"\n"
-"4. Propriété intellectuelle\n"
-"\n"
-"Tous les droits, titres et intérêts des différents Logiciels sont la \n"
-"propriété exclusive de leurs auteurs respectifs et sont protégés au titre \n"
-"des droits de propriété intellectuelle et autres lois régissant le droit \n"
-"des Logiciels. Les marques « Mandrake » et « Mandrake Linux » ainsi que "
-"les \n"
-"logotypes associés sont déposés par MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Dispositions diverses\n"
-"\n"
-"Si une disposition de ce contrat de licence devait être déclarée nulle, \n"
-"illégale ou inapplicable par un tribunal compétent, cette disposition sera \n"
-"exclue du présent contrat. Vous continuerez à être liés aux autres \n"
-"dispositions, qui recevront leurs pleins effets. Le contrat de licence \n"
-"est soumis à la Loi française. Toute contestation relative aux présentes \n"
-"sera réglée préalablement par voie amiable. A défaut d'accord avec \n"
-"MandrakeSoft S.A., les tribunaux compétents de Paris seront saisis du \n"
-"litige. Pour toute question relative au présent document, veuillez \n"
-"contacter MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatur"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Bitte wählen Sie Ihren Tastaturtyp."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Hier die Liste aller Schlüsselworte"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Welche Art von Installation wollen Sie durchführen?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Installation/Aktualisierung"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Handelt es sich um eine Installation oder eine Aktualisierung?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Empfehlenswert"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Experte"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Aktualisierung"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Bitte wählen Sie Ihren Maustyp."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Maus Port"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Bitte wählen Sie den seriellen Anschluss, an dem Ihre Maus hängt."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Tastenemulation"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Emulation der 2. Taste"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Emulation der 3. Taste"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA Karten konfigurieren ..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "IDE konfigurieren"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "Keine Partition verfügbar"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Durchsuchen der Partitionen, um die Einhängpunkte zu finden."
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Wählen Sie die Einhängpunkte"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Vermutlich ist Ihre Partitionstabelle fehlerhaft, ich habe Probleme,\n"
-"sie zu lesen :-(  (Folgender Fehler trat auf: „%s“).\n"
-"Ich kann fortfahren, indem ich die fehlerhaften Partitionen lösche \n"
-"(dabei gehen ALLE darauf vorhandenen DATEN VERLOREN!). Alternativ können \n"
-"Sie mir jedoch auch verbieten, die Partitionstabelle zu verändern.\n"
-"\n"
-"Sind Sie einverstanden, dass ich die problematischen Partitionen lösche?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ist nicht in der Lage, Ihre Partitionstabelle korrekt zu \n"
-"interpretieren. Sie können fortfahren, jedoch auf eigenes Risiko!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Sie haben keinen Platz für die 1 MB große Start-Partition vorgesehen! Die "
-"Installation wird fortgesetzt, Sie müssen jedoch eine Start-Partition mit "
-"DiskDrake erstellen."
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr ""
-"Es wurde keine Verzeichnisbaumwurzel gefunden, die aktualisiert werden kann."
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Verzeichnisbaumwurzel"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Welche Partition ist Ihre Verzeichnisbaumwurzel?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Sie müssen Ihren Rechner neu starten, um die Änderungen \n"
-"der Partitionstabelle wirksam werden zu lassen."
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Zu formatierende Partitionen auswählen"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Soll ich nach defekten Blöcken suchen?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Partitionen formatieren"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Erzeugen und formatieren der Datei %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Der Swap-Bereich ist zu klein, um die Installation zu ermöglichen! \n"
-"Bitte vergrößern Sie den Bereich."
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Suche nach vorhandenen Paketen"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Finden der zu aktualisierenden Pakete"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Es steht auf Ihrem System nicht genügend Speicherplatz für die \n"
-"Installation bzw. Aktualisierung zur Verfügung (%d > %d)."
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Komplett (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimal (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Empfohlen (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Benutzerdefiniert"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Bitte wählen Sie, ob die Paketauswahl von Diskette geladen \n"
-"oder darauf gespeichert werden soll. Es handelt sich um das \n"
-"selbe Format, wie die unter „auto_install“ erzeugten Disketten."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Von Diskette laden"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Laden von Diskette ..."
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Auswahl der Pakete"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr ""
-"Legen Sie eine Diskette ein, auf der Ihre Paketauswahl gespeichert ist."
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Auf Diskette speichern"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Gewünschte Größe übersteigt den verfügbaren Platz"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Falls Sie alle aufgeführten CDs haben, wählen Sie „OK“, \n"
-"falls Sie keine der aufgeführten CDs haben, wählen Sie „Abbruch“,\n"
-"falls nur einige der aufgeführten CDs fehlen, entfernen Sie die \n"
-"entsprechende Markierung und wählen Sie dann „OK“."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM „%s“"
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installiere Paket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Einstellungen für nach der Installation"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Bitte legen Sie die Startdiskette in Laufwerk %s ein."
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr ""
-"Bitte legen Sie die Diskette der zu aktualisiernden Module in Laufwerk %s "
-"ein."
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Sie haben nun die Möglichkeit Software mit starker Verschlüsselung aus dem \n"
-"Internet zu laden.\n"
-"\n"
-"WARNUNG:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall MandrakeSoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"Bitte wenden Sie sich für alle weiteren Fragen bzgl. dieser Übereinkunft "
-"an: \n"
-"MandrakeSoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Bitte wählen Sie einen Mirror, von dem Sie die Pakete holen wollen."
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Verbindung mit dem Mirror aufbauen, um eine Liste verfügbarer Pakete zu "
-"erhalten."
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Bitte wählen Sie die zu installierenden Pakete."
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Wählen Sie Ihre Zeitzone"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "Hardware Uhr liefert GMT"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatische Zeit-Synchronisation (durch NTP)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "NTP Server"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "CUPS-Server auf der Gegenseite"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Kein Drucker"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Zusammenfassung"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Maus"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Zeitzone"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Drucker"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDN Karte"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Soundkarte"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV-Karte"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Lokale Dateien"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Root-Passwort setzen"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Kein Passwort"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Dieses Passwort ist zu einfach (es muss mindestens %d Zeichen lang sein)!"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Authentifizierung"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "LDAP Authentifizierung"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "LDAP Server"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "NIS Authentifizierung"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS Domain"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS Server"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Mit einer individuellen Startdiskette können Sie Ihr LINUX-System starten, \n"
-"ohne auf einen Betriebssystemstarter angewiesen zu sein. Dies ist "
-"nützlich, \n"
-"wenn Sie SILO nicht auf Ihrem System installieren möchten, wenn ein \n"
-"anderes Betriebssystem SILO entfernt hat oder Ihre Hardware-Konfiguration \n"
-"die Verwendung eines BS-Starters nicht korrekt verarbeitet. \n"
-"Eine individuelle Startdiskette kann auch mit der Mandrake Linux \n"
-"Rettungsdiskette verwendet werden, wodurch das System nach schwerwiegenden \n"
-"Fehlern viel einfacher wiederhergestellt werden kann.\n"
-"\n"
-"Falls Sie eine Startdiskette erstellen wollen, legen Sie eine Diskette \n"
-"ohne relevante Daten in ihr erstes Laufwerk und drücken Sie „OK“."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Erstes Disketten-Laufwerk"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Zweites Disketten-Laufwerk"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Ãœberspringen"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Mit einer individuellen Startdiskette können Sie Ihr LINUX-System starten, \n"
-"ohne auf den normalen Betriebssystemstarter angewiesen zu sein. Dies ist "
-"nützlich, wenn \n"
-"Sie weder LILO noch Grub auf Ihrem System installieren möchten, wenn ein \n"
-"anderes Betriebssystem Ihren Betriebssystemstarter entfernt hat wird oder "
-"Ihre Hardware-Konfiguration die Verwendung eines Betriebssystemstarters "
-"nicht korrekt \n"
-"verarbeitet. Eine individuelle Startdiskette kann auch mit der Linux \n"
-"Mandrake Rettungsdiskette verwendet werden, wodurch das System nach \n"
-"schwerwiegenden Fehlern viel einfacher wiederhergestellt werden kann.\n"
-"\n"
-"Möchten Sie jetzt eine Startdiskette für Ihr System erstellen?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Ich kann kein Laufwerk finden"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Wählen Sie das Laufwerk, in dem Sie die Start-Diskette erstellen wollen"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Legen Sie eine leere Diskette in Laufwerk %s ein."
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Startdiskette wird erstellt..."
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Betriebssystemstarter vorbereiten"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Sie scheinen einen „OldWorld“ oder unbekannten\n"
-"Rechner zu verwenden. Der Betriebssystemstarter\n"
-"„yaboot“ wird daher leider nicht funktionieren.\n"
-"Die Installation wird fortgesetzt, sie werden jedoch \n"
-"„BootX“ verwenden müssen um LINUX auf Ihrem Rechner\n"
-"zu starten."
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Möchten Sie „aboot“ verwenden?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fehler bei der Installation von aboot. Soll ich die Installation \n"
-"mit Gewalt versuchen, auch wenn dies die Zerstörung der ersten \n"
-"Partition verursachen kann?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-msgid "Installing bootloader"
-msgstr "BS-Starter installieren"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Die Installation des BS-Starters schlug Fehl. Folgender Fehler trat auf:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Sie müssen Ihr Open Firmware Startgerät anpassen, dass es den \n"
-"BS-Starter erkennt. Falls Sie beim Neustart nicht die \n"
-"Eingabeaufforderung des BS-Starters sehen, drücken Sie \n"
-"Strg-Option-O-F und geben Sie folgendes ein:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-"Tippen Sie dann: shut-down\n"
-"Beim darauffolgenden Neustart sollte Sie die Eingabeaufforderung sehen."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Niedrig"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Mittel"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Hoch"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Wählen Sie eine Sicherheitsebene"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Legen Sie eine leere Diskette in Laufwerk %s ein."
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Erstellen einer Auto-Installationsdiskette"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Einige Schritte sind noch nicht komplett.\n"
-"\n"
-"Wollen Sie DrakX wirklich beenden?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Herzlichen Glückwunsch, die Installation ist abgeschlossen.\n"
-"Entfernen Sie die Startmedien (CD-ROMs / Disketten) und drücken Sie \n"
-"die Eingabetaste zum Neustart Ihres Rechners.\n"
-"\n"
-"Für Informationen zu Sicherheitsaktualisierungen dieser Version von \n"
-"Mandrake Linux informieren Sie sich bitte unter \n"
-"http://www.mandrakelinux.com/.\n"
-"\n"
-"Wie Sie Ihr System warten können, erfahren Sie im Kapitel „Nach der \n"
-"Installation“ im offiziellen Benutzerhandbuch von Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Erstellen einer Auto-Installationsdiskette"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Die automatische Installation kann, falls Sie wollen,\n"
-"vollautomatisch erfolgen. In diesem Fall wird die\n"
-"Festplatte vollständig durch DrakX rekonfiguriert\n"
-"(diese Möglichkeit ist für die Replikation auf anderen\n"
-"Rechnern gedacht).\n"
-"\n"
-"Vermutlich werden Sie es vorziehen, erneut eine normale\n"
-"Installation durchzuführen.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automatisiert"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Erneut abspielen"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Paketauswahl speichern"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installation %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"   <Tab>/<Alt-Tab> nächstes Element | <Leertaste> auswählen | <F12> weiter "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "Ich kann „kdesu“ nicht finden!"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "Wählen Sie eine Datei"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Fortgeschritten"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Bitte warten"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Baum erweitern"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Baum verkleinern"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Umschalten zwischen unsortiert und gruppiert"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Mehrdeutigkeit (%s), bitte präzisieren Sie\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Schlechte Wahl, bitte versuchen Sie es noch einmal\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr "? (Standard %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ihre Wahl? (Standard %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Ihre Wahl? (Standard %s, geben Sie „none“ für keine(r/s) ein) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Tschechien (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Deutschland"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Spanien"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Finnland"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Frankreich"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norwegen"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Polen"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Russland"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Schweden"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Grßbritannien"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "Vereinigte Staaten von Amerika"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Albanien"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armenien (alt)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armenien (Schreibmaschine)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armenien (Phonetisch)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Aserbeidschan (Lateinisches Layout)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belgien"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulgarien"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilien (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Weißrussland"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Schweiz (deutsches Layout)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Schweiz (französisches Layout)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Tschechien (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Deutschland (ohne Tod-Tasten)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Dänemark"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (USA)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegen)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estland"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgien (Kyrillisches Layout)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgien (Lateinisches Layout)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Griechenland"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Ungarn"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Kroatien"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Israel"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Israel (Phonetisch)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iran"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Island"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Italien"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japan (106 Tasten)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Korea"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Lateinamerika"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litauen (AZERTY - alt)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litauen (AZERTY - neu)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litauen (QWERTY - „number row“)"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litauen (QWERTY - Phonetisch)"
-
-#: ../../keyboard.pm_.c:208
-msgid "Latvian"
-msgstr "Lettland"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Mazedonien"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Niederlande"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Polen (QWERTY Layout)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Polen (QWERTZ Layout)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugal"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Quebec)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Rumänien (QWERTZ)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Rumänien (QWERTY)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Russland (YaWERTY)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Slowenien"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slowakei (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slowakei (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "Serbien (Kyrillisches Layout)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Thailändische Tastatur"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr "Tadschikistan"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Türkei (traditionelles „F“ Modell)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Türkei (modernes „Q“ Modell)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukraine"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "Vereinigte Staaten von Amerika (international)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnam QWERTY („number row“)"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslawien (Lateinisches Layout)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Schleife bei den Einhängpunkten %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Entfernen Sie erst die Logischen Medien\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Maus"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MausMan/FirstMaus (Seriell)"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generische PS2 Rad-Maus"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Maus"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMaus"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 Taste"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Generisch"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Rad"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "Seriell"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Generische 2 Tasten Maus"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Generische 3 Tasten Maus"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMaus"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MausMan/FirstMaus"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Serie"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MausMan+/FirstMaus+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Serie"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Maus (Seriell, alter C7 Typ)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "Bus-Maus"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 Tasten"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 Tasten"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "keine"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Keine Maus"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Bitte testen Sie Ihre Maus"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Um Ihre Maus zu aktivieren:"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEWEGEN SIE IHR MAUS-RAD!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Beenden"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Weiter ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Zurück"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Ist dies richtig?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Internetverbindung"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Der gebräuchlichste Weg mit ADSL eine Verbindung aufzubauen ist pppoe.\n"
-"Einige Verbindungen benutzen jedoch pptp, andere dhcp.\n"
-"Wenn Sie nicht wissen was Sie brauchen, wählen Sie „pppoe verwenden“"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "DHCP verwenden"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "PPPOE verwenden"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "PPTP verwenden"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Welchen DHCP Klienten wollen Sie verwenden?\n"
-"Voreingestellt ist „dhcpcd“"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ich habe keine Ethernet-Netzwerkkarte finden können, daher kanndieser "
-"Verbindungstyp nicht konfiguriert werden."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Wählen Sie die Netzwerkkarte"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Bitte wählen Sie, über welches Netzwerkgerät Sie die \n"
-"Internetverbindung herstellen wollen."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "Keine Netzwerkkarte gefunden"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Netzwerk konfigurieren"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Bitte geben Sie ihren Rechnernamen an.\n"
-"Einige DHCP-Server benötigen ihn, um korrekt zu arbeiten.\n"
-"Ihr Rechnername sollte auch die Domain beinhalten,\n"
-"etwa „meinrechner.meineabteilung.meinefirma.de“."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Rechnername"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Netzwerk Konfigurationsassistent"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Externes ISDN Modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interne ISDN Karte"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Um welchen Typ ISDN-Verbindung handelt es sich?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Welche ISDN Konfiguration wollen Sie durchführen?\n"
-"\n"
-"* Die alte Konfiguration verwendet „isdn4net“. Sie \n"
-"  enthällt mächtigere Werkzeuge, ist jedoch komplizierter \n"
-"  einzurichten und nicht voll standardkonform.\n"
-"\n"
-"* Die neue Konfiguration mit „isdn-light“ ist \n"
-"  verständlicher und standardkonformer, sie enthällt \n"
-"  jedoch weniger Werkzeuge.\n"
-"\n"
-"Wir empfehlen die „isdn-light“ Variante.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Neue Konfiguration (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Alte Konfiguration (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN Konfiguration"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Wählen Sie Ihren Netzanbieter.\n"
-"Sollte er nicht aufgeführt sein, wählen Sie „Nicht aufgeführt“"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "Europäisches Protokoll"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "Europäisches Protokoll (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "Protokoll für den Rest der Welt"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokoll für den Rest der Welt \n"
-"ohne D-Kanal (Leased Lines)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Welches Protokoll wollen Sie verwenden?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Welchen Kartentyp verwenden Sie?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Keine Ahnung"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA/PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Falls Sie eine ISA-Karte besitzen, sollten die Einstellungen auf dem "
-"nächsten Schirm korrekt sein.\n"
-"\n"
-"Falls Sie eine PCMCIA-Karte besitzen, müssen Sie IRQ und E/A-Bereich Ihrer "
-"Karte kennen.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Abbruch"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Fortfahren"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Bitte wählen Sie Ihre ISDN Karte"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ich habe eine PCI ISDN-Karte gefunden, \n"
-"kenne sie jedoch nicht. Bitte helfen Sie mir,\n"
-"indem Sie im nächsten Menü eine auswählen."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Ich konnte keine PCI ISDN-Karte finden.\n"
-"Bitte wählen Sie im nächsten Menü eine aus."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Bitte wählen Sie den seriellen Anschluss, an dem Ihr Modem hängt."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Einwahl Parameter"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Name der Verbindung"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Telefonnummer"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Skript-basiert"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Terminal-basiert"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Name der Domäne"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Erster DNS Server (optional)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Zweiter DNS Server (optional)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Sie können die Verbindung trennen oder sie neu konfigurieren."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Sie können Ihre Internetverbindung neu konfigurieren"
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Sie sind momentan mit dem Internet verbunden."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Sie können eine Internetverbindung aufbauen oder die Verbindung neu "
-"konfigurieren"
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Sie sind momentan nicht mit dem Internet verbunden."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Internetverbindung herstellen"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Internetverbindung trennen"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Internetverbindung konfigurieren (LAN oder Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Internetverbindung und -einrichtung"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Wir werden nun die Verbindung „%s“ konfigurieren."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Wir werden nun die Verbindung „%s“ konfigurieren.\n"
-"\n"
-"\n"
-"Wählen Sie „OK“, um fortzufahren."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Netzwerk konfigurieren"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Da Sie eine Netzwerkinstallation durchführen, ist Ihr Netzwerk bereits\n"
-"konfiguriert. Wählen Sie „OK“, um diese Einstellung beizubehalten oder\n"
-"„Abbruch“, um Ihre Internet- und Netzwerk-Konfiguration neu zu\n"
-"konfigurieren.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Willkommen zum Netzwerk Konfigurationsassistent.\n"
-"\n"
-"Ich versuche nun Ihre Internet-/Netzwerk-Verbindung zu konfigurieren.\n"
-"Falls Sie keine Autodetektion wünschen, entfernen Sie bitte die Markierung.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Wählen Sie das Profil, dass eingestellt werden soll"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Autoerkennung benutzen"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Geräteerkennung..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Normale Modem Verbindung"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "an Prot %s gefunden"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN Verbindung"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "%s gefunden"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ADSL Verbindung"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "an Schnittstelle %s gefunden"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Kabel Verbindung"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "Kabel Verbindung gefunden"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "LAN Verbindung"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "Netzwerkkarte(n) gefunden"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Wählen Sie die Verbindung, die Sie konfigurieren wollen"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Sie haben verschiedene Varianten eingerichtet, sich mit dem\n"
-"Internet zu verbinden. Bitte wählen Sie, welche Verbindungsart\n"
-"ich versuchen soll.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Internet-Verbindung"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Möchten Sie die Verbindung bei Betriebssystemstart herstellen?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Netzwerk Konfiguration"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr "Das Netzwerk muss neu gestartet werden"
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Beim Neustart des Netzwerks trat ein Fehler auf: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Herzlichen Glückwunsch, die Netzwerk-/Internet-Einrichtung ist beendet.\n"
-"\n"
-"Die Konfiguration wird nun in Ihr System integriert.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Es ist sehr empfehlenswert, im Anschluss Ihre X-Oberfläche\n"
-"neu zu starten, um Probleme, die durch die Änderung des\n"
-"Rechnernamens hervorgerufen werden, zu vermeiden."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"WARNUNG: Dieses Gerät wurde bereits zum Herstellen einer Internetverbindung "
-"konfiguriert.\n"
-"Drücken Sie einfach „OK“, um die Einstellungen zu behalten.\n"
-"Fall Sie Felder verändern, wird die Konfiguration überschrieben."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Bitte geben Sie die IP Parameter dieser Maschine ein.\n"
-"Jeder Eintrag muss als dezimale IP-Adresse in Punktschreibweise \n"
-"angegeben werden (etwa  „192.168.1.42“)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurieren der Netzwerkkarte %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (Treiber %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP Adresse"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Netzmaske"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(BOOTP/DHCP)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Automatische IP-Adressen Zuweisung"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Die IP Adresse sollte etwa die Form „192.168.1.42“ haben!"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Bitte geben Sie ihren Rechnernamen an.\n"
-"Ihr Rechnername sollte auch die Domain beinhalten,\n"
-"etwa „meinrechner.meineabteilung.meinefirma.de“.\n"
-"Falls Sie ein Gateway verwenden, sollten Sie auch dessen IP-Adresse angeben."
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS-Server"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Gateway Gerät"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Proxies einstellen"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP Proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP Proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr "Netzwerkkarten-ID überwachen (sinnvoll für Laptops)"
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Proxy muss „http://...“ sein"
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Proxy muss „ftp://...“ sein"
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Internet Konfiguration"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Möchten Sie jetzt versuchen eine Internetverbindung aufzubauen?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Ich teste gerade Ihre Verbindung..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Sie sind jetzt mit dem Internet verbunden."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Aus Sicherheitsgründen wird die Verbindung nun unterbrochen."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Sie sind momentan nicht mit dem Internet verbunden.\n"
-"Versuchen Sie Ihre Internetverbindung wieder zu konfigurieren."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Verbindungskonfiguration"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr ""
-"Bitte füllen Sie die folgen Felder aus \n"
-"bzw. makieren Sie die korrekten Angaben"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "Karten IRQ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Karten Mem (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "Karten E/A"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "Karten IO_0"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "Karten IO_1"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Ihre eigene Telefonnummer"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Name des Providers (z.B. provider.net) "
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Telefonnummer des Providers"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "Erster DNS des Providers (optional)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "Zweiter DNS des Providers (optional)"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "Land auswählen"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Wahlmodus"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Verbindungsgeschwindigkeit"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "VerbindungsTimeout (in Sec)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Kennzeichen (Login)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Passwort"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Diese Rechnerarchitektur kennt keine erweiterten Partitionen"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Sie haben einen unbenutzten Bereich in Ihrer Partitionstabelle, \n"
-"den ich nicht ansprechen kann. Die einzige Lösung ist, dass Sie \n"
-"Ihre primären Partitionen so verschieben, dass der Bereich direkt \n"
-"neben der erweiterten Partition zu liegen kommt."
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restaurieren aus der Datei %s schlug Fehl: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Fehlerhafte Backup-Datei"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fehler beim Schreiben in Datei %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Mit Ihrer Platte stimmt etwas nicht!\n"
-"Der vorgenommene Integritätstest schlug Fehl.\n"
-"Das bedeutet, dass jeder Schreibvorgang auf der Platte zu einem \n"
-"unvorhersagbaren Ergebnis führen wird."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "unbedingt notwendig"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "wichtig"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "sehr angenehm"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "angenehm"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "eventuell"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Lokaler Drucker"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Entfernter Drucker"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "Drucker an CUPS-Server auf der Gegenseite"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "Drucker an lpd-Server auf der Gegenseite"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Netzwerkdrucker (Socket)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Drucker an SMB/Windows 9x/ME/NT"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "Drucker an NetWare Server"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "Druckeranschluss URI"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "Den Auftrag an ein Kommando weiterleiten"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "Unbekanntes Modell"
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr "Rohdaten-Drucker (kein Treiber)"
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(an %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "(an diesem Rechner)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Wählen Sie die Drucker-Anbindung"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Wie ist der Drucker mit Ihrem Rechner verbunden?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"Falls auf der Gegenseite ein CUPS-Server läuft, müssen Sie\n"
-"hier keine Einstellungen vornehmen, die Drucker werden \n"
-"automatisch erkannt und übernommen. Wählen Sie im\n"
-"Zweifelsfall „CUPS-Server auf der Gegenseite“."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Keiner"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-msgid "Choose a default printer!"
-msgstr "Wählen Sie einen Standard-Drucker!"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-"Falls auf der Gegenseite ein CUPS-Server läuft, müssen Sie\n"
-"hier keine Einstellungen vornehmen; CUPS Server informieren Ihren\n"
-"Rechner über die von ihnen verwalteten Drucker. Alle Drucker,\n"
-"die Ihr Rechner momentan kennt sind unter „Standarddrucker“ aufgeführt.\n"
-"Bite wäen Sie daraus nun Ihren Standarddrucker und betätigen Sie die\n"
-"Schaltfläche „Drucker aktualisieren“. Durch betägen dieser Schaltfläche\n"
-"können Sie die Liste aktualisieren (es dauert bis zu 30 Sekunden nach\n"
-"Start des Cups-Servers, bis alle entfernten Drucker sichtbar sind).\n"
-"Sollte der entfernte CUPS Server jedoch in einem anderen Subnetz\n"
-"beheimatet sein, müssen Sie mindestens seine IP-Adresse, evtl. auch\n"
-"die Port Nummer angeben. Im lokalen Subnetz können Sie die Felder\n"
-"frei lassen."
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalerweise wird CUPS automatisch entsprechend Ihres Netzwerks\n"
-"eingerichtet, damit Sie alle Drucker im lokalen Netzwerk verwenden\n"
-"können. Falls das nicht funktioniert, schalten Sie „Automatische\n"
-"CUPS Konfiguration“ aus und editieren Sie die Datei\n"
-"„/etc/cups/cupsd.conf“ selbst. Vergessen Sie nicht, CUPS anschließend\n"
-"neu zu starten (Befehl: „service cups restart“)."
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Schließen"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "Drucker aktualisieren"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Die IP Adresse sollte etwa die Form „192.168.1.42“ haben!"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "Die Prot Nummer muss eine Zahl sein!"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "Standarddrucker"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "CUPS-Server-IP"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr "Automatische CUPS Konfiguration"
-
-#: ../../printerdrake.pm_.c:217
-msgid "Detecting devices ..."
-msgstr "Geräteerkennung..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Test der Anschlüsse"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Ein Drucker, Modell „%s“ wurde gefunden an "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Lokaler Druckeranschluss"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Mit welchem Anschluss ist Ihr Drucker verbunden \n"
-"(Bem.: /dev/lp0 entspricht LPT1:)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Druckeranschluss"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "Geräte-/Dateiname fehlt!"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-msgid "Reading printer database ..."
-msgstr "Lesen der Drucker-Datenbank ..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Optionen für Netzwerk-Druckerspooler"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Um eine entfernte lpd Warteschlange zu verwenden, müssen Sie \n"
-"den Rechnernamen des Drucker-Servers sowie den Namen der Warteschlange \n"
-"auf diesem Server angeben, in die die Aufträge gestellt werden sollen."
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "Name des entfernten Rechners"
-
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "Name des entfernten Druckers"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "Der Name des entfernten Rechners fehlt!"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "Der Name des entfernten Druckers fehlt!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Drucker-Parameter"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Um auf einem SMB-Drucker zu drucken sind folgende Angaben erforderlich: \n"
-"Rechnername des Drucker-Servers (entspricht nicht immer dem \n"
-"TCP/IP-Rechnernamen des Computers) und möglicherweise die IP-Adresse, \n"
-"Freigabename für den Drucker, auf den Sie zugreifen möchten, sowie \n"
-"entsprechender Benutzername, Passwort und Arbeitsgruppe."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "SMB-Server"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "SMB-Server-IP"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Freigabename"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Arbeitsgruppe"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Sie müssen entweder Den Servernamen oder seine IP-Adresse angeben!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "Der Name des Samba Shares fehlt!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "Optionen für NetWare-Drucker"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Um auf einem NetWare-Drucker zu drucken sind folgende Angaben erforderlich: "
-"Name des NetWare-Drucker-Servers (entspricht nicht immer dem TCP/IP-"
-"Rechnernamen des Computers), Name der Drucker-Warteschlange, sowie den "
-"entsprechenden Benutzernamen samt Passwort."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Drucker-Server"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Name der Druckerwarteschlange"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "Der NCP Servername fehlt!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "Der NCP Warteschlangen-Name fehlt!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Optionen für Socket-Drucker"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Um einem Socket-Drucker verwenden zu können, müssen Sie auf alle \n"
-"Fälle dessen Rechnernamen, möglicherweise auch den Port, angeben.\n"
-"Bei HP JetDirect Servern ist die Port-Adresse normalerweise 9100,\n"
-"bei anderen Servern kann es eine andere sein. Schauen Sie\n"
-"im Zweifelsfall in die Unterlagen Ihrer Hardware."
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "Rechnername des Druckers"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "Der Rechnername des Druckers fehlt!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Druckeranschluss URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Sie können hier direkt die URI eines Druckers angeben. Die URI muss den CUPS "
-"bzw. den Foomatic Spezifikationen genügen. Es sei hier noch angemerkt, dass "
-"nicht alle URI-Typen von allen Drucksystemem unterstützt werden."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "Sie müssen eine gültige URI eingeben!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Jeder Drucker benöt einen Namen (etwa „lp“).\n"
-"Beschreinung und Standort münicht ausgefüllt werden.\n"
-"Sie dienen nur als Kommentare für den Anwender."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Druckername"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Beschreibung"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Standort"
-
-#: ../../printerdrake.pm_.c:701
-msgid "Preparing printer database ..."
-msgstr "Vorbereiten der Drucker-Datenbank ..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "Auswahl des Druckertyps"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "Über welchen Druckertyp verfügen Sie?"
-
-#: ../../printerdrake.pm_.c:866
-msgid "OKI winprinter configuration"
-msgstr "OKI Win-Drucker Konfiguration"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark Tintenstrahl-Konfiguration"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"Standard-Einstellungen des Druckers\n"
-"Sie sollten sicherstellen, dass Papiergröße und\n"
-"Farbpatrone (falls vorhanden) richtig eingestellt\n"
-"sind. Es sei auch angemerkt, dass mit sterigender\n"
-"Druckqualität die Druckgeschwindigkeit häufig\n"
-"sinkt."
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Der Parameter %s muss eine Zahl sein!"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Der Parameter %s muss eine Zahl sein!"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Der Parameter %s ist yu groß oder zu klein!"
-
-#: ../../printerdrake.pm_.c:1136
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Möchten Sie diesen Drucker („%s“)\n"
-"als Standarddrucker verwenden?"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "Testseiten"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"Bitte wählen Sie, welche Testseite sie drucken wollen.\n"
-"\n"
-"Bemerkung: Der Druck der Photo-Testseite dauert häufig extrem lange.\n"
-"Bei Laserdruckern mit wenig Speicher kann es auch vorkommen, dass sie\n"
-"gar nicht gedruckt wird. Normalerweise sollte es ausreichen, die\n"
-"Standard-Testseiten auszudrucken."
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "Keine Testseiten"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "Drucken"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "Standard-Testseite"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr "Alternative Testseite (US-Format - „Letter“)"
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr "Alternative Testseite (A4)"
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "Photo-Testseite"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Druck der Testseite(n) ..."
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Die Testseite(n) wurden an den Drucker gesandt.\n"
-"Es kann einen Augenblick dauern, bevor der Drucker seine Arbeit aufnimmt.\n"
-"Druckstatus:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Die Testseite(n) wurden an den Drucker gesandt.\n"
-"Es kann einen Augenblick dauern, bevor der Drucker seine Arbeit aufnimmt.\n"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "War der Ausdruck korrekt?"
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-msgid "Raw printer"
-msgstr "Rohdaten-Drucker"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Drucken auf Drucker „%s“"
-
-#: ../../printerdrake.pm_.c:1294
-msgid "Print option list"
-msgstr "Liste der Drucker-Optionen"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "Lesen der Treiber-Datenbank ..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "Drucker-Einstellung transferieren"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-"Sie kön die Druckerkonfiguration, die Sie für den Spooler \n"
-"„%s“ vorgenommen haben für „%s“, ihren aktuellen Spooler, \n"
-"verwenden. Alle Daten (Name, Beschreibung, Standort, \n"
-"Verbindungsart und Standartoptionen) werden übernommen, \n"
-"Druckjobs in der alten Warteschlange gehen jedoch verloren.\n"
-"Nicht alle Warteschlangen können übernommen werden:\n"
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-"CUPS unterstützt keine Druker an Novel Servern oder Drucker,\n"
-"die ihre Daten in ein frei gewähltes Kommando senden.\n"
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-"PDQ unterstützt nur lokale Rechner, entfernte LPD Drucker und\n"
-"Socket/TCP Drucker.\n"
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD und LPRng unterstükeine IPP Drucker.\n"
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-"Zusätzlich wurden die Warteschlangen nicht mit diesem\n"
-"Programm erstellt oder „foomatic-configure“ kann nicht\n"
-"übertragen werden."
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-"\n"
-"Drucker, die mit den PPD-Dateien ihrer Hersteller\n"
-"oder CUPS eingenen Treibern eingerichtet wurden, können\n"
-"nicht übertragen werden."
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Markieren Sie die Druckerdaten, die sie übertragen wollen und \n"
-"betätigen Sie die Schaltfläche „Übertragen“."
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "Druckerdaten nicht übertragen"
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "Ãœbertragen"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Es existiert bereits ein Drucker mit Namen „%s“ unter %s.\n"
-"Durch betätigen der Schaltfäche „Übertragen“ können Sie ihn\n"
-"überschreiben. Sie können dem Drucker auch einen neuen \n"
-"Namen geben oder ihn einfach überspringen."
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Druckernamen sollten nur Buchstaben, Ziffern und den Unterstrich unterhalten"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Der Drucker „%s“ existiert bereits. Wollen Sie ihn wirklich \n"
-"ersetzen?"
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "Neuer Druckername"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Ãœbertragen von %s ..."
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-"Sie haben Ihren alten Standarddrucker übertragen („%s“),\n"
-"soll es auch Ihr Standarddrucker unter dem neuen\n"
-"Drucksystem „%s“ werden?"
-
-#: ../../printerdrake.pm_.c:1423
-msgid "Refreshing printer data ..."
-msgstr "Aktualisieren der Druckerdaten ..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1432
-msgid "Starting network ..."
-msgstr "Netzwerk starten ..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-msgid "Configure the network now"
-msgstr "Netzwerk jetzt konfigurieren"
-
-#: ../../printerdrake.pm_.c:1455
-msgid "Network functionality not configured"
-msgstr "Ihr Netzwerk ist nicht konfiguriert"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-msgid "Go on without configuring the network"
-msgstr "Weiter ohne Netzwerkkonfiguration"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-msgid "Restarting printing system ..."
-msgstr "Drucksystem neu starten ..."
-
-#: ../../printerdrake.pm_.c:1548
-msgid "high"
-msgstr "Hoch"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "paranoid"
-msgstr "Paranoid"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Starting the printing system at boot time"
-msgstr "Drucksystem beim BS-Start aktivieren"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "Suche nach installierter Software"
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "Entfernen von LPRng ..."
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "Entfernen des LPD ..."
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Wählen Sie das Drucksystem"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Welches Drucksystem (Spooler) wollen Sie verwenden?"
-
-#: ../../printerdrake.pm_.c:1759
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigurieren von Drucker „%s“ ..."
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Drucker-Optionen"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr "PrinterDrake vorbereiten ..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "Möchten Sie einen Drucker konfigurieren?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr "Drucksystem: "
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Normaler Modus"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Standard)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Drucker an CUPS-Server(n) auf der Gegenseite"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-msgid "Printer(s) on remote server(s)"
-msgstr "Drucker an Server(n) auf der Gegenseite"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Drucker hinzufügen"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-msgid "Do you want to configure another printer?"
-msgstr "Möchten Sie einen weiteren Drucker einrichten?"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "Drucker-Konfiguration ändern"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Drucker%s: %s %s\n"
-"Was wollen Sie an diesem Drucker ändern?"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "Ausführen!"
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "Art der Druckeranbindung"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "Druckername, Beschreibung, Standort"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "Druckerproduzent, Modell, Treiber"
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "Druckerproduzent, Modell"
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr "Als Standarddrucker verwenden"
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "Testseite(n) drucken"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "Drucker entfernen"
-
-#: ../../printerdrake.pm_.c:2071
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Alten Drucker „%s“ entfernen ..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Der Drucker „%s“ ist jetzt Ihr Standarddrucker“"
-
-#: ../../printerdrake.pm_.c:2103
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Möchten Sie den Drucker „%s“ wirklich entfernen?"
-
-#: ../../printerdrake.pm_.c:2105
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Drucker „%s“ entfernen ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxies einstellen"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Herzlich willkommen zum Proxy Konfigurationsassistenten.\n"
-"\n"
-"Hier können Sie Ihre HTTP und FTP Proxies mit oder ohne\n"
-"Anmeldung und Passwortabfrage einrichten\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Bitte füllen Sie die HTTP Proxy Informationen aus\n"
-"Falls sie keinen HTTP Proxy wolen, lassen Sie einfach\n"
-"alle Felder leer."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "Port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Die URL muss mit „http:“ beginnen"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Die Prot Nummer muss eine Zahl sein!"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Bitte füllen Sie die FTP Proxy Informationen aus\n"
-"Falls sie keinen FTP Proxy wolen, lassen Sie einfach\n"
-"alle Felder leer."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Die URL muss mit „ftp:“ beginnen"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Bitte geben Sie - falls nötig - Kennzeichen und Passwort für den Proxy \n"
-"an. Lassen Sie die Felder leer, falls Sie sie kein Kennzeichen/Passwort \n"
-"wollen."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "Kennzeichen"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Passwort"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "Passwort (erneut)"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Die Passwörter stimmen nicht überein. Bitte versuchen Sie es eneut!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ich kann keine Partition zu dem _formatierten_ RAID md%d hinzufügen"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ich kann Datei „%s“ nicht schreiben"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid schlug Fehl"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid schlug Fehl (Möglicherweise fehlen die RAID-Tools)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nicht genügend Partitionen für RAID Level %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Startet das ALSA (Advanced Linux Sound Architecture) Sound System"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-"Mit dem Dienst anacron können cron-Prozesse auch zu anderen als den \n"
-"vorgegebenen Zeiten gestartet werden. Dies ist vor Allem dann \n"
-"sinnvoll, wenn Ihr Rechner nicht rund um die Uhr läuft, da sonst \n"
-"Prozesse, die etwa zwischen Mitternacht und 6:00 Uhr gestartet \n"
-"werden sollten, nie ausgeführt würden."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Der APM-Dienst (apmd) wird von Laptops verwendet, um den Ladestatus \n"
-"der Batterie durch den Syslog-Dienst erfassen zu lassen. Mit seiner \n"
-"Hilfe kann man den Rechner auch rechtzeitig herunterfahren lassen, \n"
-"bevor die Batterien leer sind."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Dieser Dienst startet Applikationen der at-Warteschlange wenn der \n"
-"dafür vorgesehene Zeitpunkt erreicht ist. Lässt die Systemauslastung \n"
-"es zu, werden sog. Batch-Anwendungen gestartet."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Der Befehl cron wird unter UNIX/Linux dazu verwendet, Benutzerprogramme \n"
-"zu vordefinierten regelmäßigen Zeiten abzuarbeiten. \n"
-"Der Dienst vixie cron erweitert dieses Konzept um weitere Funktionen, etwa \n"
-"ein verbessertes Sicherheitskonzept und einfachere Konfiguration."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"Der GPM-Dienst stellt Ihnen Mausunterstützung auf Text-Konsolen zur \n"
-"Verfügung. Sie erhalten damit die Möglichkeit Ausschneiden und \n"
-"Einfügen von Text wie unter X zu verwenden. In einigen Applikationen \n"
-"können Sie auch Pop-Up-Menüs damit bedienen."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake führt Hardwaretests durch, und konfiguriert (falls nötig) \n"
-"neue/geänderte Hardware."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache ist ein World-Wide-Web-Server. Mit seiner Hilfe können Sie \n"
-"HTML-Dateien über HTTP publizieren. Der Server ist CGI-fähig."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Der Internet Superserver-Dienst (inetd) startet je nach Bedarf \n"
-"etliche andere Internet-Dienste, so etwa telnet, ftp, rsh oder \n"
-"rlogin. Dies jedoch nur, wenn die entsprechenden Dienste in der \n"
-"Datei „/etc/inetd.conf“ freigeschaltet sind. \n"
-"Schalten Sie diesen Dienst ab, können Sie keine der von inetd \n"
-"verwalteten Dienste mehr zugreifen."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Startet Paketfilterung für Linux 2.2er Kerne, um Ihren Rechner \n"
-"durch eine Firewall vor Angriffen aus dem Netz zu schützen."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Dieser Dienst lädt die Tastaturbelegung, die in der Datei \n"
-"„/etc/sysconfig/keyboard“ angegeben ist. Mittels „kbdconfig“ \n"
-"können Sie diese Einstellung ändern. Schalten Sie diesen Dienst ab, \n"
-"müssen Sie ab dem nächsten Systemstart mit der amerikanischen \n"
-"Tastatur vorlieb nehmen."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatische Neuerstellung der Kern-Header in /boot für\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"Automatische Erkennung und Konfiguration neuer Hardware während des \n"
-"Betriebssystemstarts."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf versucht beim Betriebssystemstart einige Verwaltungsaufgaben \n"
-"auszuführen."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Der Dienst lpd ist der Drucker-Server Ihres Rechners. Wenn Sie \n"
-"diesen Dienst abschalten werden Druckaufträge nicht mehr abgearbeitet.\n"
-"Hauptaufgabe von lpd ist es, Druckaufträge an den jeweiligen \n"
-"zuständigen Drucker (dieser kann auch einen anderen Rechner hängen) \n"
-"zu senden."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Der Linux Virtual Server kann verwendet werden, um um ein \n"
-"hochperformanten Hochverfügbarkeitsserver aufzusetzen."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"Der Dienst named (BIND) stellt ihnen einen Server zur Verfügung, \n"
-"mit dessen Hilfe Rechnernamen in IP-Adressen umgesetzt werden. \n"
-"Ein solcher Dienst wird „Domain Name Server“ (DNS) genannt. \n"
-"Falls Sie nur einen Rechner besitzen, mit dem Sie über Modem ins \n"
-"Netz gehen, benötigen Sie diesen Dienst nicht."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Dieser Dienst ist verantwortlich dafür, dass alle Netzwerk-Dateisysteme \n"
-"(NFS) bei Systemstart eingehängt werden, etwa SMB (Lan Manager/Windows) \n"
-"und NCP (NetWare)."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Dieser Dienst aktiviert Netzwerkgeräte (etwa Netzwerkkarten), die \n"
-"so konfiguriert wurden, dass sie ab dem Systemstart zur Verfügung \n"
-"stehen sollen."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ist ein geläufiges Protokoll in TCP/IP Netzwerken um Dateien \n"
-"durch verschiedene Rechner gemeinsam nutzen zu können. \n"
-"Dieser Dienst stellt Ihnen einen solchen Server zur Verfügung. \n"
-"Konfiguriert wird er in der Datei „/etc/exports“."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ist ein geläufiges Protokoll in TCP/IP Netzwerken um Dateien \n"
-"durch verschiedene Rechner gemeinsam nutzen zu können. \n"
-"Der Dienst nfslock stellt Ihnen hierfür Locking-Mechanismen zur \n"
-"Verfügung, damit eine Datei nicht durch mehrere Personen \n"
-"gleichzeitig verändert werden kann."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Schaltet beim Betriebssystemstart automatisch die „Num“-Taste für \n"
-"die virtuellen Konsolen und XFree ein."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Unterstützung für den OKI 4w und kompatible WinDrucker."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA wird normalerweise in Laptops verwendet, um Ethernet-Karten \n"
-"oder Modems verwenden zu können. Dieser Dienst wird nur gestartet, \n"
-"wenn Sie ihn vorher konfiguriert haben. Daher schadet es nicht, \n"
-"wenn Sie ihn auf Rechnern aktivieren, auf denen er nutzlos ist."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Mittels portmapper werden RPC-Verbindungen verwaltet, die etwa von \n"
-"den Protokollen NFS und NIS verwendet werden. Auf Rechnern, die \n"
-"solche Server (RPC-basierte) beherbergen, muss dieser Dienst \n"
-"aktiviert sein."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix ist ein E-Mail Transport-Dienst. Mit seiner Hilfe werden \n"
-"E-Mails auf andere Maschinen weitergeleitet."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Dieser Dienst speichert beim Herunterfahren des Rechners den Zustand \n"
-"des Zufallszahlengenerators, um ihn beim nächsten Systemstart \n"
-"wieder zu restaurieren. Die Qualität erzeugter Zufallszahlen \n"
-"wird dadurch verbessert."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Weist Roh-Geräten ein blockorientiertes Gerät (etwa eine\n"
-"Festplattenpartition) zu. Dies wird für Anwendungen wie\n"
-"etwa ORACLE benötigt"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Der Dienst routed ermöglicht ein automatisches Aktualisieren der \n"
-"IP-Routing-Tabellen mittels RIP Protokoll. Zwar wird RIP in kleinen \n"
-"Netzwerken verwendet, jedoch wird für komplexere Netzwerke ein \n"
-"anderer Dienst benötigt."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Der Dienst rstat ermöglicht es Anwendern anderer Rechner des \n"
-"Netzwerks Preformance-Daten dieses Rechners zu erhalten."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Der Dienst rusers ermöglicht es Anwendern anderer Rechner \n"
-"herauszubekommen, welche Benutzerkennzeichen auf diesem Rechner \n"
-"gerade angemeldet sind."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Der Dienst rwho erlaubt es Benutzern entfernter Rechner eine Liste\n"
-"momentan angemeldeter Benutzerkennzeichen übermittelt zu bekommen \n"
-"(ähnlich wie finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Starten des Sound-Systems Ihres Rechners"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Mittels Syslog versuchen zahlreiche Dienste Verlaufsprotokolle \n"
-"in vorgesehene Dateien zu sichern. Es ist sinnvoll Syslog immer \n"
-"aktiviert zu haben."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Lädt die Treiber für Ihre USB-Geräte."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Dieser Dienst startet den X-Font-Server. Er ist notwendig, \n"
-"damit XFree gestartet werden kann!"
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Wählen Sie, welche Dienste\n"
-"automatisch beim Systemstart\n"
-"aktiviert werden sollen"
-
-#: ../../services.pm_.c:126
-msgid "Printing"
-msgstr "Drucken"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-msgid "System"
-msgstr "System"
-
-#: ../../services.pm_.c:137
-msgid "Remote Administration"
-msgstr "Fernwartung"
-
-#: ../../services.pm_.c:145
-msgid "Database Server"
-msgstr "Datenbankserver"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Dienste"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "aktiv"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "gestoppt"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Dienste und Dämonen"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Es existieren leider keine\n"
-"weiteren Informationen zu\n"
-"diesem Dienst."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Bei BS-Start"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Pakete Installieren ..."
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ich kann Ihre Partitionstabelle nicht lesen, sie ist fehlerhaft :-(\n"
-"Um fortfahren zu können setze ich die fehlerhaften Partitionen zurück"
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "Fehler!"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ich kann die benötigte Abbild-Datei „%s“ nicht finden."
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "Auto-Installationskonfigurator"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Sie sind dabei, eine Auto-Installationsdiskette zu erstellen. Diese\n"
-"Möglichkeit ist gefährlich und sollte mit Vorsicht verwendet werden!\n"
-"\n"
-"Sie können mit diesem Werkzeug die Installation, die Sie auf Ihrem\n"
-"Rechner erneut durchspielen, wobei Sie an einigen Stellen interaktiv\n"
-"Einfluss nehmen zu können.\n"
-"\n"
-"Aus Sicherheitsgründen wird die Partitionierung und Formatierung nie\n"
-"automatisch durchgeführt.\n"
-"\n"
-"Wollen Sie fortfahren?"
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "Automatische Konfiguration der Schritte"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Bitte wählen Sie für jeden Schritt, ob er wie bei Ihrer Installation "
-"vorgenommen werden soll, oder ob Sie ihn manuell durchführen wollen."
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Gratuliere!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Die Diskette wurde erfolgreich erstellt.\n"
-"Sie können die Installation nun automatisch durchführen."
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Teilen der Internet-Verbindung"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Teilen der Internetverbindung momentan eingeschaltet."
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Es wurde bereits eine geteilte Internet-Verbindung aufgesetzt.\n"
-"Momentan ist sie aktiviert.\n"
-"\n"
-"Was wollen Sie tun?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "deaktivieren"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "Verwerfen"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "neu konfigurieren"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Server deaktivieren ..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Teilen der Internet-Verbindung ist nun abgeschaltet."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Teilen der Internet-Verbindung momentan abgeschaltet."
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Es wurde bereits eine geteilte Internet-Verbindung aufgesetzt.\n"
-"Momentan ist sie deaktiviert.\n"
-"\n"
-"Was wollen Sie tun?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "aktivieren"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Server aktivieren ..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Teilen der Internetverbindung ist nun eingeschaltet."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Sie sind dabei, Ihren Rechner zu konfigurieren, dass er die eingerichtete \n"
-"Internetverbindung mit einem lokalem Netzwerk teilt.\n"
-"\n"
-"Anmerkung: Sie benötigen eine Netzwerkkarte, mit deren Hilfe Sie ein \n"
-"lokales Netz (LAN) aufsetzen können."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Schnittstelle %s (verwendet Modul %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Schnittstelle: %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Sie haben keine Netzwerkkarte!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ihr Rechner hat keine konfigurierte Netzwerkkarte. Bitte verwenden Sie erst "
-"HardDrake, bevor Sie weiter machen."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Netzwerkkarte"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Sie haben nur eine konfiguriertes Netzwerkgerät an Ihrem Rechner:\n"
-"\n"
-"%s\n"
-"\n"
-"Ich setze ihr lokales Netz damit auf."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Bitte wählen Sie die Netzwerkkarte, die mit Ihrem lokalen Netzwerk \n"
-"verbunden ist."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"WARNUNG: Ihre Netzwerkkarte ist bereits konfiguriert.\n"
-"Ich werde eine Neukonfiguration vornehmen."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Es liegt ein möglicher LAN-Adressen Konflikt in der Konfiguration\n"
-"von %s vor!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Ich habe eine Firewall-Konfiguration gefunden!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"WARNUNG: Ich habe eine eine Firewall-Konfiguration gefunden. \n"
-"Möglicherweise müssen Sie nach der Installation einige Einstellungen \n"
-"von Hand vornehmen."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Konfigurieren ..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Skripte konfigurieren, Software installieren, Dienste starten ..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Probleme beim Installieren von Paket %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Es wurde alles eingerichtet.\n"
-"Sie können Ihre Internetverbindung nun anderen Rechnern in Ihrem \n"
-"lokalen Netz mittels automatischer Netzwerk-Konfiguration (DHCP) \n"
-"teilen."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Die Einstellungen wurden bereits vorgenommen, sie sind nur nicht aktiviert."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Die Einstellungen wurden bereits vorgenommen und sind aktiv."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Teilen der Internetverbindung wurde noch nicht konfiguriert."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Teilen der Internetverbindung - Konfiguration"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Willkommen zu DrakGW -\n"
-"das Werkzeug zum Teilen Ihrer Internetverbindung\n"
-"\n"
-"%s\n"
-"\n"
-"Wählen Sie „Konfigurieren“ wenn Sie den Assistenten starten wollen."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netzwerk Konfiguration (%d Karten)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Profil löschen..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Zu löschendes Profil: "
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Neues Profil..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr "Name des neuen Profils (es wird als Kopie des aktuellen erstellt):"
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Rechnername: "
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Internetzugang"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Typ:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Schnittstelle:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Verbunden"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Nicht Verbunden"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Verbinden ..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Trenne Verbindung ..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Ich starte Ihre Verbindung..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Ich trenne Ihre Verbindung..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Die Verbindung wurde nicht getrennt.\n"
-"Versuchen Sie es von Hand, indem sie als Root\n"
-"„/etc/sysconfig/network-scripts/net_cnx_down“ ausführen."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Ihr Rechner ist nun nichtmehr verbunden."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Internet-Zugang konfigurieren"
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "LAN Konfiguration"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Treiber"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Schnittstelle"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protokoll"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Netzwerk konfigurieren"
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr "Hier starten Sie den Assistenten ->"
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Anwenden"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Einen Moment ... ich richte die Konfiguration ein"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Sie haben noch keine Schnittstelle eingerichtet.\n"
-"Sie können dies tun, indem Sie die Schaltfläche \n"
-"„Konfigurieren“ betätigen."
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "LAN Konfiguration"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Boot-Protokoll"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Beim Hochfahren gestartet"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP Klient"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "Jetzt aktivieren"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "Jetzt deaktivieren"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Sie haben noch keine Internetverbindung eingerichtet.\n"
-"Sie können dies tun, indem Sie die Schaltfläche \n"
-"„Konfigurieren“ betätigen."
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Konfiguration der Internetverbindung"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Konfiguration der Internetverbindung"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Verbindungstyp: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parameter"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Netzwerkkarte"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP-Klient"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Cracker-Spielplatz"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Schwach"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoid"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Diese Ebene ist mit Vorsicht zu verwenden. Zwar macht sie Ihr System \n"
-"einfacher handhabbar, aber auch leichter angreifbar: In dieser Form darf \n"
-"der Rechner nicht als Netzwerkrechner (LAN oder Modem) verwendet werden, \n"
-"da Angreifer mangels Passwort an Ihre Daten gelangen können!"
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Passwortabfragen sind nun eingeschaltet, aber die Verwendung als \n"
-"Netzwerkrechner kann hier nicht empfohlen werden."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Diese Sicherheitsebene bringt wenige Verbesserungen. Die Zentrale ist \n"
-"die Ausgabe von mehr Warnungen und Tests."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Das ist die Standard-Sicherheitsebene für Rechner, mit Internetzugang \n"
-"als Klient. Es werden keine Sicherheitstests durchgeführt."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Mit dieser Sicherheitsebene wird es möglich, das System als einen \n"
-"Server zu verwenden.\n"
-"Die Sicherheit ist nun ausreichend hoch, um das System als Server \n"
-"einzusetzen, der einer Vielzahl von Klienten einen Verbindungsaufbau \n"
-"erlaubt."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Diese Ebene bietet die selbe Funktionalität, wie Ebene 4. Jedoch ist \n"
-"das System nun komplett geschlossen. Das ist die höchste Sicherheitsebene."
-
-#: ../../standalone/draksec_.c:65
-msgid "Security level"
-msgstr "Sicherheitsebene"
-
-#: ../../standalone/draksec_.c:67
-msgid "Use libsafe for servers"
-msgstr "„libsafe“ bei Servern verwenden"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Eine Bibliothek, die gegen sog. „buffer overflow“-Angriffe schützt."
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Sicherheitsebene einstellen"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrollzentrum"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Wählen Sie das Werkzeug, das Sie verwenden wollen"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "Verwendung: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Wollen Sie, dass die Rücktaste auf den Konsolen Entfernen sendet?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "CD-ROM wechseln"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Bitte legen Sie die Installations-CD-ROM in Ihr Laufwerk und drücken \n"
-"Sie dann „OK“. Falls Sie sie nicht vorlegen haben, drücken Sie \n"
-"„Abbruch“."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ich bin nicht in der Lage, eine Live Aktualisierung durchzuführen!!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "Kein „serial_usb“ gefunden\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Den dritten Maustaste emulieren?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Firewall-Konfiguration"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Firewall-Konfiguration"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Sie haben bereits eine Firewall eingerichtet.\n"
-"Wählen Sie die Schaltfläche „Konfigurieren“,\n"
-"um sie zu löschen oder zu verändern."
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Wählen Sie die Schaltfläche „Konfigurieren“,\n"
-"um eine Standard-Firewall einzurichten."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Sprache auswählen"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Installationsart auswählen"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Festplatten suchen"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Maus konfigurieren"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Tastatur auswählen"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sicherheit"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Dateisysteme einrichten"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Partitionen formatieren"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Zu installierende Pakete"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "System installieren"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Benutzer hinzufügen"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Netzwerk konfigurieren"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Dienste konfigurieren"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Startdiskette erstellen"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "BS-Starter installieren"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X konfigurieren"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Installation beenden"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"TinyFirewall Konfigurierer\n"
-"\n"
-"Hiermit konfigurieren Sie eine persönliche Firewall für diesen\n"
-"Mandrake Linux Rechner. Sollten Sie an einer speziellen ausgereiften\n"
-"Firewall-Lösung interessiert sein, schauen Sie sich nach der speziell\n"
-"dafür entwickelten MandrakeSecurity Firewall Distribution um."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Wir fragen Sie nun, welchen Diensten Sie direkten Internetzugang\n"
-"gestatten wollen. Bitte machen Sie sich sorgfältig Gedanken über diese\n"
-"Fragen. Es geht hierbei schließlich um die Sicherheit Ihres Systems!\n"
-"\n"
-"Bitte schotten Sie jeden Dienst, den sie aktuell nicht verwenden, vom \n"
-"Netz ab. Sie können die vorgenommenen Einstellungen mit Hilfe dieses \n"
-"Programms jederzeit wieder ändern!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Betreiben Sie auf Ihrem Rechner einen Web-Server, der im gesamten\n"
-"Internet sichtbar sein soll? Falls der Server nur auf Ihrer Maschine\n"
-"zugreifbar sein soll, können Sie hier getrost NEIN antworten.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Betreiben Sie einen Name-Server auf Ihrem Rechner? Falls Sie keinen\n"
-"Eingerichtet haben, um dem gesamten Internet IP und Bereichsinformationen\n"
-"anzubieten, antworten Sie hier NEIN.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Wollen Sie eingehende Secure Shell (ssh) Verbindungen gestatten?\n"
-"Es handelt sich hierbei um einen Ersatz für Telnet. Falls sie noch\n"
-"Telnet verwenden, sollten Sie definitiv auf dieses Protokoll wechseln.\n"
-"Telnet überträgt Ihre gesamte Kommunikation (also auch Passwörter)\n"
-"UNVERSCHLÃœSSELT! Sie bieten damit einem potentiellen Angreife ein\n"
-"leichtes Spiel. Die SSH hingegen verschlüsselt die komplette\n"
-"Kommunikation und warnt sogar falls sie eine Unregelmäßigkeit bemerkt."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Wollen Sie eingehende Telnet-Verbindungen gestatten?\n"
-"Dienst extrem unsicher, wie wir bereits früher erwähnten. Wir empfehlen\n"
-"Ihnen daher nachdrücklich mit NEIN zu antworten und im Bedarfsfall auf\n"
-"die SSH auszuweichen.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Betreiben Sie einen FTP Server der aus dem Internet zugreifbar sein soll?\n"
-"Falls ja, sollten Sie ihn jedoch nur für „anonymen Transfer“ verwenden,\n"
-"da das Protokoll keine Verschlüsselung übertragener Passwörter vorsieht."
-"Verwenden Sie „scp“ aus dem SSH Paket zum verschlüsselten\n"
-"Datentransfer zwischen zwei Rechnern.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Betreiben Sie einen Mail-Server? Falls Sie Ihre Nachrichten mit\n"
-"einem textbasierten E-Mail Programm wie pine oder mutt schreiben\n"
-"ist dies vermutlich der Fall. Andernfalls sollten Sie den Dienst\n"
-"abschalten.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Betreiben Sie einen POP oder IMAP Server? Sie würden damit\n"
-"Postfächer für nicht-web-basierten E-Mail Zugriff über diese\n"
-"Maschine bereitstellen.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Sie scheinen einen 2.2er Kern zu verwenden. Falls Sie Ihre\n"
-"IP-Adresse automatisch im lokalen Netzwerk erhalten sollen,\n"
-"müssen wir dies gestatten. Ist das bei Ihnen der Fall?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Wird die Zeit Ihres Rechners automatisch mit anderen Rechnern\n"
-"synchronisiert? Dies ist häufig ab mittelgroßen UNIX/Linux Betrieben\n"
-"der Fall. Damit wird ein einheitliches Zeitschema, etwa für die\n"
-"Datensicherung zugrunde gelegt. Wenn Sie nicht in einem größeren\n"
-"Betrieb arbeiten oder noch nie etwas zu diesem Thema gehört haben,\n"
-"trifft es für Sie vermutlich nicht zu."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfiguration beendet. Soll ich die Änderungen auf Platte schreiben?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ich kann „%s“ nicht öffnen: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ich kann „%s“ nicht zum Schreiben öffnen: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Server, Web/FTP"
-
-#
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Netzwerk-Computer (Klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-Server, SMB-Server, Proxy-Server, SSH-Server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome-Arbeitsplatz"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Werkzeuge für Ihren Palm Pilot oder Ihren Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Arbeitsplatzrechner"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Server, Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domänen- (DNS) und Netzwerk Informationsserver (NIS)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Office-Programme: Textverarbeitung (KWord, Abiword), Tabellenkalkulation "
-"(KSpread, Gnumeric), PDF-Betrachter, usw."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio Programme: MP3- und Midi-Abspieler, Mixer, usw."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Bücher und HOWTOs zu GNU/Linux und Freier Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE-Arbeitsplatz"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, usw."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia / Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Programme für Mail, News, WWW, FTP und Chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Server, Datenbank"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgeSQL oder MySQL Datenbankserver"
-
-#
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Werkzeuge, die die Konfiguration Ihres Rechners erleichtern"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia / Sound"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Werkzeuge"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentation"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsolen-Werkzeuge"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-"Postfix E-Mail-Server und\n"
-"Inn Diskussionsforen-Server"
-
-#
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internetrechner"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimediarechner"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfiguration"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Weitere Arbeitsoberflächen (GNOME, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Das K Desktop Environment, die Standard-Arbeitsoberfläche mit einer Sammlung "
-"zugehöriger Programme"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafische Arbeitsoberfläche"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Entwicklungsplattform"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache und Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Werkzeuge zur Erstellung und zum Brennen von CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Büro-Arbeitsplatz"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "GNOME, IceWM, Window Maker, Enlightenment, Fvwm, usw."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Bildverarbeitungsprogramme wie der GIMP"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C und C++ Entwicklung: Bibliotheken, Programme und Include-Dateien"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Netzwerkrechner Server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Server, Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Spiel-Station"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videoabspieler und Editoren"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia / Grafik"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Spiele: Arcade-, Brett-, Strategiespiele, usw."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Programme zum E-Mail bzw. News lesen und senden (pine, mutt, tin, ...)sowie "
-"zum durchstöbern des WWW"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivierung, Emulation, Ãœberwachung"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanzverwaltung"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Eine grafische Oberfläche mit anwenderfreundlichen Anwendungen und Werkzeugen"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienten für verschiedene Protokolle, u.a. SSH"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet-Gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Sound- und Video-Abspieler/Editoren"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Andere grafische Arbeitsoberflächen"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editoren, Shells, Dateiwerkzeuge, Konsolen"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Finanzverwaltungsprogramme, etwa Gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Spiele"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Persönliches Informationsmanagement"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia / CD-Brenner"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Wissenschaftlicher Arbeitsplatzrechner"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "Ich kann „/etc/sysconfig/autologin“ nicht zum lesen öffnen: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Möchten Sie das Netzwerk neu starten?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Sind Sie einverstanden?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Sind Sie einverstanden diese Netzwerkkarte neu zu starten:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr ""
-#~ "Ich werde nun die Netzwerkkarte „%s“ neu starten. Sind Sie einverstanden?"
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Hier die eingerichteten Drucker.\n"
-#~ "Sie können weitere hinzufügen oder existierende ändern."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr ""
-#~ "Verbindungstimeout (in Sec) [ Im Beta-Stadium, noch nicht vollständig "
-#~ "implementiert ]"
-
-#~ msgid ""
-#~ "The Mandrake Linux spreads among several CDROMs. It may be that drakX "
-#~ "has\n"
-#~ "selected packages on another CDROM than the installation CDROM, and when "
-#~ "it\n"
-#~ "needs that you put another one into the drive, it will eject the current "
-#~ "CDROM\n"
-#~ "and ask you for another one."
-#~ msgstr ""
-#~ "Die komplette Version von „Mandrake Linux“ besteht aus mehreren CD-ROMs.\n"
-#~ "DrakX hat möglicherweise auch Pakete von anderen Medien, als nur der \n"
-#~ "Installatios-CD-ROM für die Installation vorgesehen. In diesem Fall\n"
-#~ "wird das Medium ausgeworfen und Sie werden nach einer anderen CD gefragt."
-
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Ch kann „%s“ nicht als Standarddrucker verwenden!"
-
-#~ msgid "Spooler: "
-#~ msgstr "Spooler:"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Testen Sie Ihre Maus hier."
-
-#~ msgid "Press next to continue."
-#~ msgstr "Drücken Sie „Next“, um fortzufahren."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "Wählen Sie Ihre bevorzugte Sprache für den Installationsvorgang und \n"
-#~ " Systemlaufzeit."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Sie müssen obige Lizenz akzeptieren, bevor Sie mit der Installation \n"
-#~ "fortfahren können.\n"
-#~ "\n"
-#~ "\n"
-#~ "Wählen Sie „Akzeptieren“, falls Sie mit den Bedingungen einverstanden "
-#~ "sind.\n"
-#~ "\n"
-#~ "\n"
-#~ "Bitte wählen Sie „Zurückweisen“, falls Sie damit nicht einverstanden \n"
-#~ "sind. Die Installation wird ohne Veränderungen an Ihrem Rechner "
-#~ "abgebrochen."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Wählen Sie Ihre Tastatur aus der vorgegebenen Liste"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Falls Sie weitere Sprachen im laufenden Betrieb wünschen, wählen Sie \n"
-#~ "sie aus obiger Liste. Durch markieren von „Alle“ werden alle \n"
-#~ "Sprachen installiert."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Wählen Sie:\n"
-#~ "\n"
-#~ "  - Benutzerdefiniert: Wenn Sie mit GNU/Linux vertraut sind. Sie können \n"
-#~ "dann die hauptsächliche Nutzung Ihres Rechners angeben. Einzelheiten \n"
-#~ "folgen später.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Experte: Wenn Sie den Umgang mit GNU/Linux „im Schlaf“ beherrschen \n"
-#~ "und hochgranulare Wahlmöglichkeiten wünschen, ist dies ihre \n"
-#~ "Installationsmethode. Aber BITTE WÄHLEN SIE DIESE VARIANTE NUR, WENN \n"
-#~ "SIE WIRKLICH WISSEN, WAS SIE TUN!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Die unterschiedlichen Installationsklassen (erstellt um Ihren Wünschen \n"
-#~ "und Kenntnissen gerecht zu werden) sind:\n"
-#~ "\n"
-#~ "* Arbeitsplatzrechner: Das ist die ideale Wahl, wenn Sie Ihren \n"
-#~ "Rechner als normalen Arbeitsrechner (Büro-Anwendungen, Daten- oder \n"
-#~ "Bildverarbeitung) verwenden wollen.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Entwicklungsplattform: Der Name spricht für sich. Wählen Sie diese \n"
-#~ "Alternative, wenn Sie primär Software entwickeln wollen. Sie erhalten \n"
-#~ "eine Vielzahl von Compilern, Debuggern und Werkzeugen zur \n"
-#~ "Manipulation von Quellkode.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: Verwenden Sie diese Alternative, wenn Sie einen Server \n"
-#~ "aufsetzen wollen. Sei dies ein Datei-Server (NFS oder SMB), ein \n"
-#~ "Drucker-Server (sowohl UNIX- als auch SMB-Protokoll), ein \n"
-#~ "Authentifizierungs-Server (NIS), ein Datenbank-Server, usw.\n"
-#~ "In diesem Fall werden keine Endanwender Umgebungen (etwa KDE oder \n"
-#~ "GNOME) installiert."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Sie können nun die Paketgruppen auswählen, die Sie installieren /\n"
-#~ "aktualisieren wollen.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX wird dann kontrollieren, ob Sie genug Plattenplatz haben, um sie \n"
-#~ "alle zu installieren. Falls nicht werden sie darüber informiert.\n"
-#~ "Sie können dennoch fortfahren, DrakX wird dann mit der Installation \n"
-#~ "beginnen, es wird jedoch einige weniger wichtige Pakete weglassen. \n"
-#~ "Sie können auch den Punkt „Individuelle Paketauswahl“ am Ende der \n"
-#~ "Liste markieren; Zum Dank dafür dürfen Sie aus über 1000 Paketen \n"
-#~ "manuell Ihre Auswahl treffen ;-)"
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Sie können nun genau die Pakete auswählen, die Sie installieren wollen.\n"
-#~ "\n"
-#~ "\n"
-#~ "Durch Klicken auf die Symbole [+] bzw. [-] können Sie Teilbäume auf-\n"
-#~ "bzw. zuklappen.\n"
-#~ "\n"
-#~ "Falls Sie die Pakete lieber in alphabetischer Reihenfolge aufgelistet \n"
-#~ "bekommen wollen, wählen Sie das Symbol „Umschalten zwischen flacher \n"
-#~ "Liste und Baumstruktur“.\n"
-#~ "\n"
-#~ "\n"
-#~ "Falls Sie nicht über fehlgeschlagene Abhängigkeiten informiert werden \n"
-#~ "wollen, markieren Sie „Automatische Abhängigkeiten“. Seien Sie sich \n"
-#~ "bewusst, dass das deaktivieren eines Pakets in diesem Fall das \n"
-#~ "automatische deaktivieren etlicher anderer Pakete nach sich ziehen \n"
-#~ "kann."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Falls Sie alle aufgeführten CDs haben, wählen Sie „OK“, \n"
-#~ "falls Sie keine der aufgeführten CDs haben, wählen Sie „Abbruch“,\n"
-#~ "falls nur einige der aufgeführten CDs fehlen, entfernen Sie die \n"
-#~ "entsprechende Markierung und wählen Sie dann „OK“."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "Sie können nun Ihre Maus testen. Drücken Sie die Tasten und bewegen Sie "
-#~ "das\n"
-#~ "Rad (falls vorhanden), um zu sehen, ob die Einstellungen korrekt sind.\n"
-#~ "Falls nicht drücken sie „Abbruch“ und wählen Sie einen anderen Treiber.\n"
-#~ "\n"
-#~ "\n"
-#~ "Falls Sie die Installation auf einem Apple Rechner mit einer 1-Tasten "
-#~ "Maus\n"
-#~ "vornehmen, erhalten Sie die Möglichkeit, Tasten auf der Tastatur zu "
-#~ "definieren,\n"
-#~ "die die zweite und dritte Maustaste emulieren sollen. Das ist notwendig, "
-#~ "um die\n"
-#~ "volle Funktionalität von Linux (sowohl im Textmodus, als auch unter X) "
-#~ "zu\n"
-#~ "gewährleisten.\n"
-#~ "\n"
-#~ "\n"
-#~ "Falls Sie eine ADB-Maus verwenden, wählen Sie bitte USB, der Linux-Kern "
-#~ "wird\n"
-#~ "sie dann richtig einbinden, damit Sie sie verwenden können."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Falls Sie Ihren Rechner mit einem lokalen Netz oder dem Internet in \n"
-#~ "Verbindung bringen wollen, wählen Sie die entsprechenden Alternativen.\n"
-#~ "Bitte stellen Sie sicher, dass das entsprechende Gerät eingeschaltet \n"
-#~ "und korrekt mit dem Rechner verbunden ist, damit DrakX es automatisch \n"
-#~ "erkennen kann.\n"
-#~ "\n"
-#~ "\n"
-#~ "Falls Sie Ihre Netzwerkeinstellungen nach der Installation vornehmen \n"
-#~ "wollen oder falls Sie Ihre Einstellungen beendet haben, wählen Sie \n"
-#~ "„Fertig“."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Es wurde kein Modem gefunden. Bitte wählen Sie die serielle \n"
-#~ "Schnittstelle, an der es hängt.\n"
-#~ "\n"
-#~ "\n"
-#~ "Zu Ihre Information: Die erste serielle Schnittstelle (unter \n"
-#~ "Microsoft Windows „COM1“) heißt unter GNU/Linux „ttyS0“."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Sie können nun Einwahlparameter eingeben. Falls Sie nicht wissen, \n"
-#~ "was Sie eingeben müssen, fragen Sie Ihren Internet-Dienstanbieter. \n"
-#~ "Falls Sie keinen DNS (Name-Server) angeben wir dieser bei \n"
-#~ "Verbindungsaufbau von Ihrem Internetanbieter erfragt."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Falls Sie ein externes Modem besitzen, schalten Sie es jetzt bitte an, \n"
-#~ "damit DrakX es automatisch erkennen kann."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Bitte schalten Sie Ihr Modem ein und wählen Sie das richtige."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Falls Sie nicht sicher sind, ob obige Informationen korrekt sind, \n"
-#~ "oder falls Sie nicht wissen, was Sie eintragen müssen, wenden Sie sich \n"
-#~ "bitte an Ihren Internet-Dienst-Anbieter. Falls Sie keinen Domain Name \n"
-#~ "Server (DNS) angeben, werden die Informationen Ihres Internetanbieters \n"
-#~ "bei Aufbau der Verbindung erwartet."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Sie können nun, falls nötig, Ihren Rechnernamen eingeben. Falls Sie \n"
-#~ "nicht wissen was Sie eintragen sollen, wenden Sie sich bitte an Ihren \n"
-#~ "Internet-Dienst-Anbieter."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Sie können nun Ihr Netzwerk-Gerät einrichten.\n"
-#~ "\n"
-#~ "* IP Adresse: Falls Sie diese nicht kennen sollten, wenden Sie sich bitte "
-#~ "an Ihren Netzwerk-Administrator. Sie sollten hier keine IP-Adresse \n"
-#~ "angeben, falls Sie weiter unten „Automatische IP“ auswählen.\n"
-#~ "\n"
-#~ "* Netzmaske: „255.255.255.0“ ist normalerweise eine gute Wahl. Wenn Sie \n"
-#~ "nicht sicher sind, fragen Sie Ihren Netzwerk-Administrator.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Automatische IP: Falls Ihr Netzwerk das BOOTP- oder DHCP-Protokoll \n"
-#~ "verwendet, wählen Sie bitte diese Option. Wenn gewählt, müssen Sie "
-#~ "keine \n"
-#~ "„IP Adresse“ angeben. Sind Sie sich nicht sicher, fragen Sie bitte \n"
-#~ "ebenfalls Ihren Netzwerk-Administrator."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Sie können nun, falls nötig, Ihren Rechnernamen eingeben. Falls Sie \n"
-#~ "nicht wissen was Sie eintragen sollen, wenden Sie sich bitte an Ihren \n"
-#~ "Netzwerk-Administrator."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Sie können nun, falls nötig, Ihren Rechnernamen eingeben. Falls Sie \n"
-#~ "Ihn nicht kennen, lassen Sie die Zeile leer."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Sie können jetzt Einwahl-Einstellungen vornehmen. Falls Sie sich nicht "
-#~ "sicher \n"
-#~ "sind, so können Sie die richtigen Informationen von Ihrem ISP erhalten."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Falls Sie einen Proxy-Server einsetzen wollen, so stellen Sie bitte jetzt "
-#~ "die\n"
-#~ "nötigen Parameter ein. Sind Sie sich bei diesem Punkt nicht sicher, so "
-#~ "wenden\n"
-#~ "Sie sich bitte an Ihren Netzwerk-Administrator oder ISP."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Sie können Crypto-Pakete installieren, wenn Ihre Internetverbindung \n"
-#~ "korrekt eingerichtet wurde. Wählen Sie zuerst einen Mirror, von dem \n"
-#~ "Sie die Pakete herunterladen wollen, um anschließend auszuwählen, \n"
-#~ "welche Sie installierenden wollen.\n"
-#~ "\n"
-#~ "\n"
-#~ "Bedenken Sie bei der Auswahl des Mirrors sowie der Pakete die "
-#~ "rechtlichen \n"
-#~ "Rahmenbedingungen Ihres Standorts."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Sie können nun die Zeitzone anhand Ihres Wohnortes einstellen."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Sie können einen Drucker, der direkt an Ihrem Rechner hängt, oder einen\n"
-#~ "entfernten Drucker (egal ob unter UNIX, Netware oder Microsoft Windows)\n"
-#~ "einrichten."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Falls Sie mit Ihrem neuen System auch drucken wollen, wählen Sie nun \n"
-#~ "ein Drucksystem: CUPS oder LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS ist ein neues, mächtiges und flexibles UNIX Drucksystem (CUPS\n"
-#~ "steht für  „Common Unix Printing System“, engl. für „Allgemeines \n"
-#~ "UNIX Drucksystem“). Es ist das Standard-Drucksystem Ihres Mandrake "
-#~ "Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR ist das leicht antiquierte UNIX Drucksystem aus den 1970ern. Es "
-#~ "wurde \n"
-#~ "in früheren Mandrake Linux Versionen verwendet.\n"
-#~ "\n"
-#~ "\n"
-#~ "Falls Sie keinen Drucker besitzen/verwenden wollen, wählen Sie „Keinen“."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux kann mit einer Reihe verschiedenster Drucker arbeiten. \n"
-#~ "Jede Klasse benötigt jedoch ein eigenes Konfigurationsverfahren.\n"
-#~ "\n"
-#~ "\n"
-#~ "Falls Ihr Drucker direkt mit Ihrem Rechner verbunden ist, wählen Sie \n"
-#~ "„Lokaler Drucker“.\n"
-#~ "\n"
-#~ "\n"
-#~ "Hängt der Drucker hingegen an einem anderen UNIX Rechner, wählen Sie\n"
-#~ "„Entfernter Drucker“.\n"
-#~ "\n"
-#~ "\n"
-#~ "Sollten Sie hingegen einen Drucker an einem Microsoft Windows Rechner \n"
-#~ "ansprechen wollen (bzw. einem UNIX Rechner der mit SMB arbeitet), \n"
-#~ "wählen Sie „SMB/Windows 95/98/NT“."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Bitte schalten Sie Ihren Drucker an, bevor Sie DrakX ihn von DrakX \n"
-#~ "suchen lassen.\n"
-#~ "\n"
-#~ "Sie müssen hier einige Informationen eingeben.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Druckername: Der Drucker-Spooler verwendet „lp“ als Standarddrucker.\n"
-#~ "Sie benötigen daher einen Drucker Namens „lp“.\n"
-#~ "Auch wenn Sie nur einen Drucker haben, können Sie ihm mehrere Namen \n"
-#~ "geben. Sie müssen die Namen nur durch einen senkrechten Strich (also \n"
-#~ "„|“) trennen. Falls Sie einen aussagekräftigeren Namen haben wollen,\n"
-#~ "schreiben Sie diesen vor „lp“: „Mein Drucker|lp“.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Beschreibung: Sie müssen hier keinen Text angeben, es kann jedoch \n"
-#~ "hilfreich sein, wenn Sie mehrere Drucker besitzen, die Sie \n"
-#~ "unterscheiden wollen.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Standort: Sie können hier (falls Sie wollen) Informationen zum \n"
-#~ "Standort Ihres Druckers angeben (etwa „Abstellkammer im 2. Stock“)\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Sie müssen hier einige Informationen eingeben.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Name der Warteschlange: Der Drucker-Spooler verwendet „lp“ als \n"
-#~ "Standarddrucker. Sie benötigen daher einen Drucker Namens „lp“.\n"
-#~ "Auch wenn Sie nur einen Drucker haben, können Sie ihm mehrere Namen \n"
-#~ "geben. Sie müssen die Namen nur durch einen senkrechten Strich (also \n"
-#~ "„|“) trennen. Falls Sie einen aussagekräftigeren Namen haben wollen,\n"
-#~ "schreiben Sie diesen vor „lp“: „Mein Drucker|lp“.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Spool-Verzeichnis: In diesem Verzeichnis werden die Druckprozesse \n"
-#~ "zwischengespeichert. Falls Sie unsicher sind, was Sie eintragen sollen,\n"
-#~ "sollten Sie die Vorgabe beibehalten.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Drucker-Anbindung: Falls Ihr Drucker direkt an Ihrem Rechner hängt,\n"
-#~ "wählen Sie „Lokaler Drucker“. Wollen Sie einen Drucker an einem anderen\n"
-#~ "UNIX/Linux Rechner ansprechen, wählen Sie „lpd-Server auf der "
-#~ "Gegenseite“\n"
-#~ "\n"
-#~ "\n"
-#~ "Falls Sie einen Drucker an einem Windows Rechner (oder einem UNIX "
-#~ "Rechner\n"
-#~ "mittels SMB-Protokoll) ansprechen wollen, wählen Sie \n"
-#~ "„SMB/Windows 95/98/NT“.\n"
-#~ "\n"
-#~ "\n"
-#~ "Einen Netware Drucker erreichen Sie mittels „NetWare“.\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Ihr Drucker wurde nicht erkannt. Bitte geben Sie die Schnittstelle an,\n"
-#~ "an die er angeschlossen ist.\n"
-#~ "\n"
-#~ "\n"
-#~ "Bem.: Die meisten Drucker hängen an der ersten parallelen Schnittstelle.\n"
-#~ "Diese heißt unter GNU/Linux „/dev/lp0“ (das entspricht „LPT1“ unter\n"
-#~ "den Microsoft Betriebssystemen)."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Sie müssen nun Ihren Drucker aus der Liste auswählen."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Bitte wählen Sie die passenden Parameter für Ihren Drucker.\n"
-#~ "Bitte schauen Sie in Ihr Druckerhandbuch, sofern Sie nicht wissen, \n"
-#~ "was Sie hier eintragen müssen.\n"
-#~ "\n"
-#~ "\n"
-#~ "Im nächsten Schritt haben Sie die Möglichkeit die eingestellten Werte \n"
-#~ "zu testen. Sollten die Parameter nicht stimmen, erhalten Sie die \n"
-#~ "Möglichkeit Korrekturen vorzunehmen."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Sie können nun das Root Passwort für ihr Mandrake Linux System \n"
-#~ "eingeben. Das Passwort muss zweimal eingegeben werden, um sicher \n"
-#~ "zu stellen, dass sie es korrekt eingegeben haben.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root ist das Benutzerkennzeichen des Systemadministrators. Er ist \n"
-#~ "der einzige der berechtigt ist Systemdateien zu ändern. Wählen Sie \n"
-#~ "deshalb das Passwort sehr sorgfältig aus!\n"
-#~ "\n"
-#~ "\n"
-#~ "Unberechtigter Zugang zu diesem Benutzerkennzeichen ist extrem \n"
-#~ "gefährlich für die Integrität Ihres Systems, der darauf enthaltenen \n"
-#~ "Daten, sowie anderer Rechner, auf die sie Zugriff haben.\n"
-#~ "\n"
-#~ "\n"
-#~ "Das Passwort sollte eine mindestens acht Zeichen lange alphanumerischen \n"
-#~ "Zeichenkette sein. Sie sollten es unter keinen Umständen schriftlich \n"
-#~ "aufbewahren. Machen Sie es nicht zu lang oder zu kompliziert, \n"
-#~ "schließlich sollten Sie sich ohne größere Anstrengungen daran erinnern."
-
-#~ msgid ""
-#~ "If your network uses LDAP (or NIS) protocol for authentication, select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "Falls in Ihrem Netzwerk LDAP (oder NIS) zur Authentifizierung verwendet "
-#~ "wird,\n"
-#~ "wählen Sie bitte den entsprechenden Menüpunkt. Falls Sie nicht wissen, "
-#~ "welches\n"
-#~ "Protokoll Sie verwenden, fragen Sie Ihren Netzwerkadministrator.\n"
-#~ "\n"
-#~ "Falls Ir Rechner nicht an einem administrierten Netzwerk hängt, wählen "
-#~ "Sie\n"
-#~ "bitte „Lokale Dateien“ zur Authentifizierung."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Sie können nun einen oder mehrere „reguläre“ Benutzerkennzeichen \n"
-#~ "einrichten, im Gegensatz zum „privilegierten“ Kennzeichen: root.\n"
-#~ "Sie können mehrere Benutzerkennzeichen pro Person einrichten, der Sie \n"
-#~ "Zugang zu Ihrem GNU/Linux gewähren wollen. Jedes Benutzerkennzeichen "
-#~ "hat \n"
-#~ "eigene Präferenzen (Grafische Umgebung, Programmeinstellungen, etc.), \n"
-#~ "sowie ein eigenes „home“-Verzeichnis, in dem diese Einstellungen \n"
-#~ "gespeichert werden.\n"
-#~ "\n"
-#~ "\n"
-#~ "Erstellen Sie sich zuerst eine eigene Benutzerkennung, auch wenn Sie "
-#~ "der \n"
-#~ "einzige Anwender sind, der diesen Rechner nutzt. Sie dürfen NICHT \n"
-#~ "ständig mit dem privilegierten Kennzeichen arbeiten! Das ist ein hohes \n"
-#~ "Sicherheitsrisiko! Das Risiko, Ihr System unbrauchbar zu machen ist \n"
-#~ "häufig nur einen falschen Tastendruck weit entfernt.\n"
-#~ "\n"
-#~ "\n"
-#~ "Sie sollten sich daher, außer zu Administrationszwecken, immer nur \n"
-#~ "unter dem hier erzeugten Benutzerkennzeichen anmelden."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Wir empfehlen Ihnen das erstellen einer Startdiskette! Falls sie einmal \n"
-#~ "Probleme beim Starten Ihres GNU/Linux bekommen kann dies die einzige \n"
-#~ "Möglichkeit sein, wieder an Ihre Daten zu kommen."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Die Haupt-Optionen von LILO bzw. Grub sind:\n"
-#~ "\n"
-#~ "* Boot Gerät: Angabe des Geräts (etwa eine Festplattenpartition) \n"
-#~ "das den Bootsektor enthält. Sofern Sie es nicht besser wissen, \n"
-#~ "wählen Sie hier „/dev/hda“.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Wartezeit vorm Starten des Standard Betriebssystems: Angabe der Zeit \n"
-#~ "(in zehntel Sekunden), die der Starter wartet, bevor das Standard-BS \n"
-#~ "geladen wird. Das ist besonders sinnvoll, für Rechner, die sofort nach \n"
-#~ "aktivieren der Tastatur mit dem Systemstart beginnen. Wenn die \n"
-#~ "Wartezeit auf 0 gesetzt wird, wird sofort das Standard-BS gestartet.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Video Modus: Hier wird der VGA-Text-Modus, den Mandrake beim \n"
-#~ "Systemstart verwenden soll eingestellt. Folgende Werte sind möglich: \n"
-#~ "\n"
-#~ "      * normal: Normaler 80×25 Text Modus.\n"
-#~ "\n"
-#~ "      * <Zahl>: Entsprechender Text-Modus.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Die Partition /tmp bei jedem Systemstart säubern: Falls Sie alle \n"
-#~ "Dateien und Verzeichnisse im Ordner „/tmp“ bei jedem BS-Start geleert \n"
-#~ "bekommen wollen, markieren Sie diesen Punkt.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Geben Sie, falls nötig, die genaue RAM Größe an: Es gibt leider "
-#~ "keine \n"
-#~ "Standardmethode, das BIOS nach der vorhandenen RAM-Größe zu befragen.\n"
-#~ "Daher kann es sein, dass der Linux-Kern nicht die richtige Menge RAM \n"
-#~ "erkennt. Sollte das der Fall sein, können Sie hier die richtige Menge \n"
-#~ "angeben (Bemerkung: eine Differenz von bis zu 4 MB zur realen Menge \n"
-#~ "ist normal)."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO ist ein Betriebssystemstarter für SPARC Rechner: Dieses Programm \n"
-#~ "startet entweder GNU/Linux oder die anderen Betriebssysteme, die auf \n"
-#~ "Ihrem Rechner vorhanden sind. Normalerweise erkennen diese Werkzeuge \n"
-#~ "alle existierenden Betriebssysteme korrekt und bieten Sie als \n"
-#~ "Startalternativen an. Ist dies einmal nicht der Fall, können Sie hier \n"
-#~ "manuell helfend eingreifen. Seien Sie jedoch vorsichtig, dass sie die \n"
-#~ "korrekten Parameter eingeben. \n"
-#~ "\n"
-#~ "\n"
-#~ "Eventuell möchten Sie anderen Anwendern nicht die Möglichkeit geben, \n"
-#~ "diese anderen Betriebssysteme zu verwenden, in diesem Fall können Sie \n"
-#~ "den entsprechenden Eintrag einfach löschen. Das hat jedoch zur Folge, \n"
-#~ "dass sie eine Startdiskette benötigen, um diese Betriebssysteme in \n"
-#~ "Zukunft starten zu können."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Die Haupt-Optionen von SILO sind:\n"
-#~ "  - Boot Gerät: Hier geben Sie an, wo sie die Informationen ablegen \n"
-#~ "wollen, die zum Starten Ihres GNU/Linux Systems benötigt wird. Sofern \n"
-#~ "Sie es nicht besser wissen, wählen Sie hier „Erster Sektor der Platte \n"
-#~ "(MBR)“.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Wartezeit vorm Starten des Standard Betriebssystems: Angabe der "
-#~ "Zeit \n"
-#~ "(in zehntel Sekunden), die SILO wartet bevor das Standard-BS geladen \n"
-#~ "wird. Das ist besonders sinnvoll, für Rechner, die sofort nach \n"
-#~ "aktivieren der Tastatur mit dem Systemstart beginnen. Wenn die \n"
-#~ "Wartezeit auf 0 gesetzt wird, startet SILO sofort das Standard-BS."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Nun ist es an der Zeit, Ihr X Windows System zu konfigurieren. Es \n"
-#~ "handelt sich dabei um die Basis der Grafischen Benutzerschnittstelle \n"
-#~ "(GUI) von GNU/Linux. Sie müssen dafür Ihre Videokarte sowie Ihren \n"
-#~ "Monitor einrichten. Die meisten der notwendigen Schritte sind \n"
-#~ "automatisiert. Daher wird Ihre Aufgabe vor Allem im Kontrollieren der \n"
-#~ "Ergebnisse und Bestätigen bestehen.\n"
-#~ "\n"
-#~ "\n"
-#~ "Nach Beendigung der Konfiguration wird der X-Server gestartet (außer \n"
-#~ "wenn Sie es DrakX untersagen), damit Sie testen können, ob die \n"
-#~ "vorgenommenen Einstellungen Ihren Wünschen entsprechen. Sollte dies \n"
-#~ "nicht der Fall sein, können Sie so oft wie nötig zurückkommen, um \n"
-#~ "Änderungen vorzunehmen."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Verwenden Sie diese Parameter, falls mit Ihrer X-Konfiguration etwas \n"
-#~ "nicht in Ordnung sein sollte."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Wenn Sie nach dem Systemstart direkt eine grafische Oberfläche "
-#~ "verwenden \n"
-#~ "möchten, wählen Sie „Ja“, andernfalls „Nein“."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Sie können hier die Sicherheitsebene Ihres Systems einstellen. Für \n"
-#~ "weitere Informationen schauen Sie bitte ins Handbuch. Falls Sie nicht \n"
-#~ "wissen, was Sie einstellen sollen, lassen Sie die Standardeinstellung.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Ihr Rechner wir neu gestartet.\n"
-#~ "\n"
-#~ "Nach dem Neustart wir Ihr Mandrake Linux System automatisch gestartet.\n"
-#~ "Sollten Sie ein anderes Betriebssystem starten wollen, lesen Sie bitte \n"
-#~ "die zusätzlichen Informationen."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Tschechien (Programmierer)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slowakei (Programmierer)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Name des Profils das erstellt wird: "
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Schreibe /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "Von Datei wiederherstellen"
-
-#~ msgid "Save in file"
-#~ msgstr "In eine Datei speichern"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Von Diskette wiederherstellen"
-
-#~ msgid "Format all"
-#~ msgstr "Alles formatieren"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Nach dem Formatieren aller Partitionen, "
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "werden alle Daten auf diesen Partitionen gelöscht sein"
-
-#~ msgid "Reload"
-#~ msgstr "Neu laden"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Wollen Sie eine Auto-Installations-Diskette zur einfachen \n"
-#~ "Replikation der Linux Installation erstellen"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL Konfiguration"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Falls auf der Gegenseite ein CUPS-Server läuft, müssen Sie\n"
-#~ "hier keine Einstellungen vornehmen, die Drucker werden \n"
-#~ "automatisch erkannt und übernommen. Sollte der Server jedoch \n"
-#~ "in einem anderen Netzwerk hängen, müssen Sie CUPS die IP-Adresse \n"
-#~ "und evtl. auch die Port-Nummer mitteilen."
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "Eingabe von Druckername und Kommentar"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Warteschlangen-Name des entfernten Rechners fehlt"
-
-#~ msgid "Pipe into command"
-#~ msgstr "An ein Kommando übergeben"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "Sie können hier ein Kommando angeben, an das der Druckauftrag geschickt "
-#~ "werden soll, anstatt direkt an den Drucker übergeben zu werden."
-
-#~ msgid "Command line"
-#~ msgstr "Kommandozeile"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "Sie müssen eine Kommandozeile eingeben!"
-
-#~ msgid "Modify printer"
-#~ msgstr "Drucker verändern"
-
-#~ msgid "start it"
-#~ msgstr "Starten"
-
-#~ msgid "stop it"
-#~ msgstr "Stoppen"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Netzwerküberwachung"
-
-#~ msgid "Settings"
-#~ msgstr "Einstellungen"
-
-#~ msgid "Profile "
-#~ msgstr "Profil "
-
-#~ msgid "Statistics"
-#~ msgstr "Statistik"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Sendegeschwindigkeit: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Empfangsgeschwindigkeit: "
-
-#~ msgid "Connection Time: "
-#~ msgstr "Verbindungstyp: "
-
-#~ msgid "Logs"
-#~ msgstr "Logs"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Internetverbindung herstellen "
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Internetverbindung trennen "
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Trennen der Internetverbindung schlug Fehl."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Trennen der Internetverbindung abgeschlossen."
-
-#~ msgid "Connection complete."
-#~ msgstr "Verbindung hergestellt."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Verbindung schlug Fehl.\n"
-#~ "Kontrollieren Bis Ihre Einstellungen im Mandrake Kontrollzentrum."
-
-#~ msgid "Color configuration"
-#~ msgstr "Farbeinstellungen"
-
-#~ msgid "sent: "
-#~ msgstr "Sende: "
-
-#~ msgid "received: "
-#~ msgstr "Empfing: "
-
-#~ msgid "average"
-#~ msgstr "Durchschnitt"
-
-#~ msgid "Connect"
-#~ msgstr "Verbinde"
-
-#~ msgid "Disconnect"
-#~ msgstr "Trenne Verbindung"
-
-#~ msgid "/File/_New"
-#~ msgstr "/Datei/_Neu"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>N"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/Datei/_Öffnen"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>O"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/Datei/_Speichern"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/Datei/Speichern_als"
-
-#~ msgid "/File/-"
-#~ msgstr "/Datei/-"
-
-#~ msgid "/_Options"
-#~ msgstr "/_Optionen"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/Optionen/Test"
-
-#~ msgid "/_Help"
-#~ msgstr "/_Hilfe"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/_Hilfe/_Ãœber..."
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Standard Runlevel"
-
-#~ msgid "Europe"
-#~ msgstr "Europa"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "Warteschlange entfernen"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Ich kann den Inhalt der Konfigurationsdatei nicht verstehen."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Die Konfigurationsdatei hat ein unbekanntes Format!"
-
-#~ msgid "Adapter"
-#~ msgstr "Adapter"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Sie können nun Ihre Maus testen. Betätigen Sie nun die Tasten und das\n"
-#~ "Rad (sofern vorhanden), um zu sehen ob Sie die richtige Wahl getroffen \n"
-#~ "haben. Falls nicht, wählen Sie „Abbruch“ und korrigieren Sie Ihre \n"
-#~ "Auswahl."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (oder ADSL) Verbindung"
-
-#~ msgid "Choose"
-#~ msgstr "Wählen"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Sie könne direkt die URI angeben, unter der der Drucker mit "
-#~ "CUPSangesprochen werden kann."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Ja, die ASCII Testseite drucken"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Ja, die PostScript Testseite drucken"
-
-#~ msgid "Paper Size"
-#~ msgstr "Papierformat"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Letzte Seite automatisch auswerfen?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint-Treiber Optionen"
-
-#~ msgid "Color depth options"
-#~ msgstr "Farbtiefe"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Text als PostScript drucken?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Treppeneffekt korrigieren?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Anzahl Seiten pro Blatt"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Linker/Rechter Rand in Punkt (1/72 Zoll)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Oberer/Unterer Rand in Punkt (1/72 Zoll)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Zusätzliche GhostScript-Parameter"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Zusätzliche Text-Parameter"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Druckreihenfolge umkehren"
-
-#~ msgid "CUPS starting"
-#~ msgstr "CUPS starten"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Wählen Sie die Drucker-Anbindung der Gegenseite"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Jeder Drucker benötigt einen Namen (der Hauptdrucker sollte „lp“ \n"
-#~ "genannt werden). Andere Parameter, etwa die Beschreibung und der \n"
-#~ "Standort, können frei gewählt werden. Welchen Namen soll ich dem \n"
-#~ "Drucker geben und wie ist er angebunden?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Jede Druckerwarteschlange (hier werden Druckaufträge eines Druckers \n"
-#~ "verwaltet) benötigt einen Namen (der Hauptdrucker sollte „lp“ genannt \n"
-#~ "werden) und ein Spool-Verzeichnis, in der sie ihre "
-#~ "Verwaltungstätigkeiten \n"
-#~ "vornehmen kann. Welchen Namen und welches Verzeichnis soll ich der \n"
-#~ "Schlange geben? Wie ist der Drucker angebunden?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Name der Warteschlange"
-
-#~ msgid "Spool directory"
-#~ msgstr "Spool-Verzeichnis"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Erster DNS des Providers"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Zweiter DNS des Providers"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Um ein sicheres System zu erhalten, sollten Sie „Shadow Datei verwenden“\n"
-#~ "und „MD5 Passwörter verwenden“ auswählen."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Falls Ihr Netzwerk NIS verwendet, so wählen Sie bitte „NIS verwenden“.\n"
-#~ "Sind Sie sich nicht sicher, so wenden Sie sich bitte an Ihren \n"
-#~ "Netzwerk-Administrator."
-
-#~ msgid "yellow pages"
-#~ msgstr "Gelbe Seiten"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Wie wollen Sie sich ins Internet einklinken?"
diff --git a/perl-install/share/po/el.po b/perl-install/share/po/el.po
deleted file mode 100644
index f26576caf..000000000
--- a/perl-install/share/po/el.po
+++ /dev/null
@@ -1,10236 +0,0 @@
-# Greek Translation of DrakX.
-# Copyright (c) 1999 MandrakeSoft
-# FIRST AUTHOR Theodore J. Soldatos <theodore@eexi.gr>, 1999-2000.
-# Thanos Kyritsis <djart@hellug.gr>, 2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-08-23 23:59+0300\n"
-"Last-Translator: Thanos Kyritsis <djart@hellug.gr>\n"
-"Language-Team: Greek <nls@tux.hellug.gr>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-7\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Ñýèìéóç üëùí ôùí êåöáëþí áíåîÜñôçôá"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "×ñÞóç åðÝêôáóçò Xinerama"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Ñýèìéóç ìüíï ôçò êÜñôáò \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Ñýèìéóç ðïëëþí êåöáëþí"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Ôï óýóôçìÜ óáò õðïóôçñßæåé ñýèìéóç ðïëëáðëþí êåöáëþí.\n"
-"Ôß èÝëåôå íá êÜíåôå;"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "ÊÜñôá ãñáöéêþí"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "ÅðéëÝîôå êÜñôá ãñáöéêþí"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "ÅðéëÝîôå X server (ïäçãüò êÜñôáò ãñáöéêþí)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "åîõðçñåôçôÞò X Window"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Ôß ôýðïõ XFree èÝëåôå íá Ý÷åôå;"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ç êÜñôá ãñáöéêþí óáò õðïóôçñßæåé åðéôÜ÷õíóç ôñéóäéÜóôáôùí ãñáöéêþí ìüíï \n"
-"ìå ôá XFree %s. Ç êÜñôá óáò õðïóôçñßæåôáé áðü ôá XFree %s ôá ïðïßá ìðïñåß íá "
-"äßíïõí \n"
-"êáëýôåñç õðïóôÞñéîç ãéá äéóäéÜóôáôá ãñáöéêÜ."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Ç êÜñôá ãñáöéêþí óáò õðïóôçñßæåé åðéôÜ÷õíóç ôñéóäéÜóôáôùí ãñáöéêþí óôá XFree "
-"%s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ìå åðéôÜ÷õíóç ôñéóäéÜóôáôùí ãñáöéêþí"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Ç êÜñôá ãñáöéêþí óáò õðïóôçñßæåé åðéôÜ÷õíóç ôñéóäéÜóôáôùí ãñáöéêþí óôá XFree "
-"%s,\n"
-"ÐÑÏÓÏ×Ç: ÐÅÉÑÁÌÁÔÉÊÇ ÕÐÏÓÔÇÑÉÎÇ - ÌÐÏÑÅÉ ÍÁ ÐÁÃÙÓÅÉ ÔÏÍ ÕÐÏËÏÃÉÓÔÇ ÓÁÓ!"
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ìå ÐÅÉÑÁÌÁÔÉÊÇ åðéôÜ÷õíóç ôñéóäéÜóôáôùí ãñáöéêþí"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ç êÜñôá ãñáöéêþí óáò õðïóôçñßæåé åðéôÜ÷õíóç ôñéóäéÜóôáôùí ãñáöéêþí ìüíï \n"
-"ìå ôá XFree %s. ÐÑÏÓÏ×Ç: ÐÅÉÑÁÌÁÔÉÊÇ ÕÐÏÓÔÇÑÉÎÇ - ÌÐÏÑÅÉ ÍÁ ÐÁÃÙÓÅÉ ÔÏÍ "
-"ÕÐÏËÏÃÉÓÔÇ ÓÁÓ!\n"
-"Ç êÜñôá óáò õðïóôçñßæåôáé áðü ôá XFree %s ôá ïðïßá ìðïñåß íá äßíïõí êáëýôåñç "
-"õðïóôÞñéîç\n"
-"ãéá äéóäéÜóôáôá ãñáöéêÜ."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (ïäçãüò ðñïâïëÞò åãêáôÜóôáóçò)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "Ñõèìßóåéò XFree"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "ÌÝãåèïò ìíÞìçò êÜñôáò ãñáöéêþí"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Ñõèìßóåéò X server"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "ÅðéëÝîôå ïèüíç"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Ïèüíç"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Ïé äýï êñßóéìåò ðáñÜìåôñïé åßíáé ç óõ÷íüôçôá êáôáêüñõöçò áíáíÝùóçò, çïðïßá "
-"åßíáé\n"
-"óõ÷íüôçôá ìå ôçí ïðïßá áíáíåþíåôáé ïëüêëçñç ç ïèüíç, êáèþò êáé ç óõ÷íüôçôá\n"
-"ïñéæüíôéáò áíáíÝùóçò, ç ïðïßá åßíáé ç óõ÷íüôçôá ìå ôçí ïðïßá áíáíåþíïíôáé\n"
-"ïé ïñéæüíôéåò ãñáììÝò.\n"
-"\n"
-"Åßíáé ÐÏËÕ ÓÇÌÁÍÔÉÊÏ íá ìÞí åðéëÝîåôå ôýðï ïèüíçò ôïõ ïðïßïõ ïé óõ÷íüôçôåò\n"
-"áíáíÝùóçò åßíáé åêôüò ôùí ïñßùí ôçò ïèüíçò óáò: õðÜñ÷åé êßíäõíïò "
-"êáôáóôñïöÞò\n"
-"ôçò ïèüíçò óáò. Áí äåí åßóôå óßãïõñïé, êÜíôå ìéá óõíôçñçôéêÞ åðéëïãÞ."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Óõ÷íüôçôá ïñéæüíôéáò áíáíÝùóçò"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Óõ÷íüôçôá êáôáêüñõöçò áíáíÝùóçò"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Ç ïèüíç äåí Ý÷åé ñõèìéóôåß áêüìç"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Ç êÜñôá ãñáöéêþí äåí Ý÷åé ñõèìéóôåß áêüìç"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Äåí Ý÷ïõí åðéëåãåß áíáëýóåéò áêüìç"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "ÈÝëåôå íá äïêéìÜóåôå ôéò ñõèìßóåéò;"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Ðñïóï÷Þ: Ç äïêéìÞ åßíáé åðéêßíäõíç óå áõôÞ ôçí êÜñôá ãñáöéêþí"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "ÄïêéìÞ ñõèìßóåùí"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"äïêéìÜóôå íá áëëÜîåôå êÜðïéåò ðáñáìÝôñïõò"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "ÐñïêëÞèçêå óöÜëìá:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "¸îïäïò óå %d äåõôåñüëåðôá"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Åßíáé áõôÞ ç óùóôÞ ñýèìéóç;"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "ÐñïêëÞèçêå óöÜëìá, äïêéìÜóôå íá áëëÜîåôå êÜðïéåò ðáñáìÝôñïõò"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "ÁíÜëõóç"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "ÅðéëÝîôå áíÜëõóç êáé âÜèïò ÷ñþìáôïò"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "ÊÜñôá ãñáöéêþí: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "ÊáôÜóôáóç ðñï÷ùñçìÝíùí"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "ÅìöÜíéóç üëùí"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Áíáëýóåéò"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Äéáñýèìéóç ðëçêôñïëïãßïõ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Ôýðïò ðïíôéêéïý: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "ÓõóêåõÞ ðïíôéêéïý: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Ïèüíç: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Óõ÷íüôçôá ïñéæüíôéáò áíáíÝùóçò: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Óõ÷íüôçôá êáôáêüñõöçò áíáíÝùóçò: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "ÊÜñôá ãñáöéêþí: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "ÊÜñôá ãñáöéêþí: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "ÌíÞìç êÜñôáò ãñáöéêþí: %s kb\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "ÂÜèïò ÷ñþìáôïò: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "ÁíÜëõóç: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Ïäçãüò XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Ðñïåôïéìáóßá ñõèìßóåùí ãñáöéêïý ðåñéâÜëëïíôïò (X-Window)"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Ôé èÝëåôå íá êÜíåôå;"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "ÁëëáãÞ ïèüíçò"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "ÁëëáãÞ êÜñôáò ãñáöéêþí"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "ÁëëáãÞ ñõèìßóåùí X server"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "ÁëëáãÞ áíÜëõóçò"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "ÐñïâïëÞ ðëçñïöïñéþí"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "ÅðáíÜëçøç äïêéìÞò"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "¸îïäïò"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"ÄéáôÞñçóç õðáñ÷üíôùí ñõèìßóåùí;\n"
-"Ïé ôñÝ÷ïõóåò ñõèìßóåéò åßíáé:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Ðáñáêáëþ åðáíáóõíäåèåßôå ùò %s ãéá åíåñãïðïßçóç ôùí áëëáãþí"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Ðáñáêáëþ áðïóõíäåèåßôå êáé ìåôÜ ðáôÞóôå Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "Ãñáöéêü ðåñéâÜëëïí (X) óôçí åêêßíçóç"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ìðïñþ íá ñõèìßóù ôï óýóôçìÜ óáò Ýôóé þóôå íá îåêéíÜåé áõôüìáôá óå\n"
-"ãñáöéêü ðåñéâÜëëïí (X-Windows).\n"
-"Åðéèõìåßôå áõôüìáôç åêêßíçóç ãñáöéêïý ðåñéâÜëëïíôïò;"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ÷ñþìáôá (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ÷éëéÜäåò ÷ñþìáôá (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ÷éëéÜäåò ÷ñþìáôá (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 åêáôïììýñéá ÷ñþìáôá (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 äéóåêáôïììýñéá ÷ñþìáôá (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB Þ ðåñéóóüôåñá"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 óôá 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 óôá 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Compatible, 1024x768 óôá 87 Hz interlaced (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 óôá 87 Hz interlaced, 800x600 óôá 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 óôá 60 Hz, 640x480 óôá 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 óôá 60 Hz, 800x600 óôá 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 óôá 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency ðïõ ìðïñåß íá áðåéêïíßóåé áíÜëõóç 1280x1024 óôá 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency ðïõ ìðïñåß íá áðåéêïíßóåé áíÜëõóç 1280x1024 óôá 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency ðïõ ìðïñåß íá áðåéêïíßóåé áíÜëõóç 1280x1024 óôá 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Ïèüíç ðïõ ìðïñåß íá áðåéêïíßóåé áíÜëõóç 1600x1200 óôá 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Ïèüíç ðïõ ìðïñåß íá áðåéêïíßóåé áíÜëõóç 1600x1200 óôá 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Ðñþôïò ôïìÝáò ôçò êáôÜôìçóçò åêêßíçóçò"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Ðñþôïò ôïìÝáò ôïõ äßóêïõ (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "ÅãêáôÜóôáóç SILO"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Ðïý èÝëåôå íá åãêáôáóôÞóåôå ôï ðñüãñáììá åêêßíçóçò;"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "ÅãêáôÜóôáóç LILO/grub"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO ìå ìåíïý êåéìÝíïõ"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO ìå ãñáöéêü ìåíïý"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Åêêßíçóç áðü ôï DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "ÂáóéêÝò åðéëïãÝò ðñïãñÜììáôïò åêêßíçóçò"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Bootloader ãéá ÷ñÞóç"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "ÅãêáôÜóôáóç ðñïãñÜììáôïò åêêßíçóçò"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "ÓõóêåõÞ åêêßíçóçò"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (äåí ëåéôïõñãåß ìå ðáëáéüôåñá BIOS)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "ÓõìðáãÞò"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "óõìðáãÞò"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "ÁíÜëõóç ïèüíçò"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "ÊáèõóôÝñçóç ðñéí ôçí åêêéíçóç"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Óõíèçìáôéêü"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Óõíèçìáôéêü (îáíÜ)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Áðáãüñåõóç åðéëïãþí ãñáììÞò åíôïëÞò"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "áðáãüñåõóç"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Êáèáñéóìüò /tmp óå êÜèå åêêßíçóç"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "ÁêñéâÞò ðïóüôçôáò ìíÞìçò áí ÷ñåéÜæåôáé (Ý÷ù åíôïðßóåé %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Åíåñãïðïßçóç ðïëëáðëþí profiles"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "ÅéóÜãåôå ìÝãåèïò ìíÞìçò óå Mb"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Ç åðéëïãÞ ``Áðáãüñåõóç åðéëïãþí ãñáììÞò åíôïëÞò'' åßíáé Ü÷ñçóôç ÷ùñßò "
-"óõíèçìáôéêü"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Ðáñáêáëþ ðñïóðáèÞóôå îáíÜ"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Ôá óõíèçìáôéêÜ åßíáé áíüìïéá"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "ÌÞíõìá Init"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "¶íïéãìá ÊáèõóôÝñçóçò Firmware"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "ÔÝëïò ×ñüíïõ Åêêßíçóçò ÐõñÞíá"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Åíåñãïðïßçóç åêêßíçóçò áðü CD;"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Åíåñãïðïßçóç OF åêêßíçóçò;"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Åî' ïñéóìïý ëåéôïõñãéêü óýóôçìá;"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"ÕðÜñ÷ïõí ïé áêüëïõèåò åðéëïãÝò.\n"
-"Ìðïñåßôå íá ðñïóèÝóåôå êé Üëëåò Þ íá áëëÜîåôå ôéò õðÜñ÷ïõóåò."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "ÐñïóèÞêç"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Ïëïêëçñþèçêå"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Ôñïðïðïßçóç"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Ôß ôýðïõ åðéëïãÞ èÝëåôå íá ðñïóèÝóåôå"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "¶ëëï ëåéôïõñãéêü (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "¶ëëï ëåéôïõñãéêü (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "¶ëëï ëåéôïõñãéêü (windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Image"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Read-write"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Ðßíáêáò"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "ÁíáóöáëÝò"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "ÅôéêÝôôá"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "ÅðéëïãÞ åî' ïñéóìïý"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-ìÝãåèïò"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "×ùñßòVideo"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Áöáßñåóç åðéëïãÞò"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Äåí åðéôñÝðåôáé Üäåéá åôéêÝôôá"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "ÁõôÞ ç åôéêåôôá ÷ñçóéìïðïéåßôáé Þäç"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "ÂñÞêá %s %s ðñïóáñìïãåßò"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "¸÷åôå áëëïí;"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "¸÷åôå êÜðïéïí ðñïóáñìïãÝá %s;"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "¼÷é"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Íáé"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "ÐñïâïëÞ ðëçñïöïñéþí õëéêïý"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "ÅãêáôÜóôáóç ïäçãïý ãéá %s êÜñôá %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Ðïéüí %s ïäçãü íá äïêéìÜóù;"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Óå ìåñéêÝò ðåñéðôþóåéò, ï %s ïäçãüò ÷ñåéÜæåôáé åðéðëÝïí ðáñáìÝôñïõò ãéá\n"
-"íá ëåéôïõñãÞóåé óùóôÜ, ðáñ' üëï ðïõ óõíÞèùò ëåéôïõñãåß êáé ÷ùñßò áõôÝò.\n"
-"Èá èÝëáôå íá äþóåôå åðéðëÝïí åðéëïãÝò Þ íá áöÞóåôå ôïí ïäçãü íá åîåôÜóåé\n"
-"ôï õëéêü óáò ãéá ôéò ðáñáìÝôñïõò ðïõ ÷ñåéÜæåôáé; Ç åîÝôáóç áõôÞ ßóùò\n"
-"ðñïêáëÝóåé êüëëçìá ôïõ óõóôÞìáôïò, áëëÜ äåí èá ðñïêáëÝóåé âëÜâç."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Áõôüìáôç åîÝôáóç"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Ðñïóäéïñéóìüò ðáñáìÝôñùí"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Ìðïñåßôå ôþñá íá äþóåôå ðáñáìÝôñïõò ãéá ôïí ïäçãü %s"
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Ìðïñåßôå ôþñá íá äþóåôå ôéò ðáñáìÝôñïõò ãéá ôïí ïäçãü %s.\n"
-"Ïé ðáñÜìåôñïé Ý÷ïõí ôçí ìïñöÞ ``üíïìá=ôéìÞ üíïìá2=ôéìÞ2 ...''.\n"
-"Ãéá ðáñÜäåéãìá, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "ÐáñÜìåôñïé ïäçãïý"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Ç öïñôùóç ôïõ ïäçãïý %s áðåôõ÷å.\n"
-"ÈÝëåôå íá äïêéìÜóåôå îáíÜ ìå äéáöïñåôéêÝò ðáñáìÝôñïõò;"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(ôï %s Ý÷åé Þäç ðñïóôåèåß)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Ôï óõíèçìáôéêü åßíáé ðïëý áðëü"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Ðáñáêáëþ åéóÜãåôå êùäéêü üíïìá"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Ôï êùäéêü üíïìá ìðïñåß íá ðåñéÝ÷åé ìüíï ðåæÜ ãñÜììáôá, áñéèìïýò, `-' êáé `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Áõôü ôï êùäéêü üíïìá õðÜñ÷åé Þäç"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "ÐñïóèÞêç ÷ñÞóôç"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"ÅéóÜãåôå ÷ñÞóôç\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Áðïäï÷Þ ÷ñÞóôç"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Ðñáãìáôéêü üíïìá"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Êùäéêü üíïìá"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Öëïéüò (shell)"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Åéêïíßäéï"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Áõôüìáôç óýíäåóç (Autologin)"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ìðïñþ íá ñõèìßóù ôï óýóôçìÜ óáò Ýôóé þóôå íá óõíäÝåôáé áõôüìáôá êáôÜ\n"
-"ôçí åêêßíçóç óå Ýíáí óõãêåêñéìÝíï ÷ñÞóôç.\n"
-"ÅÜí äåí èÝëåôå íá óõìâáßíåé áõôü, ðáôÞóôå óôï êïõìðß áêýñùóçò."
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "ÅðéëÝîôå ôïí åî' ïñéóìïý ÷ñÞóôç:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "ÅðéëÝîôå ôïí äéá÷åéñéóôÞ ðáñáèýñùí ðïõ èÝëåôå íá ÷ñçóéìïðïéÞóåôå"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Ðáñáêáëþ åðéëÝîôå ìéá ãëþóóá."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Ìðïñåßôå íá åðéëÝîåôå êáé Üëëåò ãëþóóåò ðïõ èá åßíáé äéáèÝóéìåò ìåôÜ ôï "
-"ðÝñáò ôçò åãêáôÜóôáóçò"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "¼ëá"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"KALOS HRTHATE STON EPILOGEA LEITOURGIKOU SYSTHMATOS %s!\n"
-"\n"
-"EPILEXTE LEITORGIKO SYSTHMA APO TON PARAPANO KATALOGO \n"
-"H PERIMENETE %d DEUTEROLEPTA GIA THN AYTOMATH EPILOGH.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "äåí õðÜñ÷åé áñêåôüò ÷þñïò óôï /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Ðïý èÝëåôå íá åãêáôáóôÞóåôå ôï ðñüãñáììá åêêßíçóçò;"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "äåí õðÜñ÷åé âïÞèåéá äéáèÝóéìç áêüìá.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Boot Ôýðïõ Ñýèìéóç"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Áñ÷åßï"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Áñ÷åßï/¸_îïäïò"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Categorizing Ïèüíç"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Ïèüíç"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "ÐáñáäïóéáêÞ Ïèüíç"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "ÐáñáäïóéáêÞ Gtk+ Ïèüíç"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Åêêßíçóç ôïõ Aurora êáôÜ ôçí åêêßíçóç ôïõ óõóôÞìáôïò"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Ëåéôïõñãßá Lilo/grub"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"×ñçóéìïðïéåßôå ôïí %s ùò Boot Manager.\n"
-"ÊÜíôå êëßê óôï Ñýèìéóç ãéá íá îåêéíÞóåôå ôïí ïäçãü åãêáôÜóôáóçò."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Ñýèìéóç"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Ëåéôïõñãßá åêêßíçóçò"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "ÊáôÜóôáóç óõóôÞìáôïò"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "¶íïéãìá ôïõ X-Window êáôÜ ôçí åêêßíçóç ôïõ óõóôÞìáôïò"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "¼÷é, äåí åðéèõìþ áõôüìáôï login"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Íáé, åðéèõìþ áõôüìáôï login ìå áõôü (user, desktop)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Áêýñùóç"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "áäõíáìßá áíïßãìáôïò ôïõ /etc/inittab ãéá áíÜãíùóç: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Ç åãêáôÜóôáóç ôïõ LILO áðÝôõ÷å. ÐñïêëÞèçêå ôï áêüëïõèï óöÜëìá:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d ëåðôÜ"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 ëåðôü"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d äåõôåñüëåðôá"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Ðáñáêáëþ êÜíôå ðñþôá Ýíá áíôßãñáöï áóöáëåßáò ôùí äåäïìÝíùí óáò"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "ÄéáâÜóôå ðñïóåêôéêÜ!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"ÅÜí óêïðåýåôå íá ÷ñçóéìïðïéÞóåôå ôï aboot, ðñïóÝîôå íá áöÞóåôå åëåýèåñï ÷þñï "
-"2048 ôïìåßò åßíáé áñêåôïß)\n"
-"óôçí áñ÷Þ ôïõ äßóêïõ"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "ÓöÜëìá"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "ÌÜãïò"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "ÍÝï"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "¼íïìá áðïìåìáêñõóìÝíçò ïõñÜò"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Óçìåßï óýíäåóçò"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "ÅðéëïãÝò"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Ôýðïò"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Áðïóýíäåóç"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Óýíäåóç"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "ÅðéëÝîôå ðñÜîç"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"¸÷åôå ìéá ìåãÜëç FAT êáôÜôìçóç\n"
-"(óõíÞèùò ÷ñçóéìïðïéïýìåíç áðü Dos Þ Windows).\n"
-"Óõíéóôþ íá áëëÜîåôå ôï ìÝãåèüò ôçò ðñþôá\n"
-"(åðéëÝîôå ôçí, ìåôÜ åðéëÝîôå \"ÁëëáãÞ ìåãÝèïõò\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Ðáñáêáëþ êÜíôå êëéê óå ìéá êáôÜôìçóç"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Ðáñáêáëþ êÜíôå êëéê óå ìéá êáôÜôìçóç"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Ðáñáêáëþ êÜíôå êëéê óå ìéá êáôÜôìçóç"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "ËåðôïìÝñåéåò"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "óýíäåóç áðÝôõ÷å"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "¶äåéï"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "¶ëëï"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Ôýðïé óõóôÞìáôïò áñ÷åßùí:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Äçìéïõñãßá"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "×ñçóéìïðïéÞóôå ``%s'' óôç èÝóç ôïõ"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "ÄéáãñáöÞ"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "ÊÜíôå ðñþôá ``Áðïóýíäåóç''"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"ÌåôÜ ôçí áëëáãÞ ôýðïõ óôçí êáôÜôìçóç %s, üëá ôá äåäïìÝíá óå áõôÞí ôçí "
-"êáôÜôìçóç èá ÷áèïýí"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Ðïý èÝëåôå íá óõíäÝóåôå ôçí óõóêåõÞ %s;"
-
-#: ../../diskdrake.pm_.c:500
-#, fuzzy
-msgid "Mount options"
-msgstr "ÐáñÜìåôñïé ïäçãïý"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:525
-#, fuzzy
-msgid "Removable media"
-msgstr "Áõôüìáôç óýíäåóç áðïóðþìåíùí ìïíÜäùí áðïèÞêåõóçò"
-
-#: ../../diskdrake.pm_.c:532
-#, fuzzy
-msgid "Change type"
-msgstr "ÁëëáãÞ ôýðïõ êáôÜôìçóçò"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Ðïéü óýôçìá áñ÷åßùí ðñïôéìÜôå;"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "ÅîõðçñåôçôÞò"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "ÅðéëÝîôå ðñÜîç"
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Äçìéïõñãßá íÝáò êáôÜôìçóçò"
-
-#: ../../diskdrake_interactive.pm_.c:188
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "ÌåôáðÞäçóç óå ðñï÷ùñçìÝíï ôñüðï ëåéôïõñãßáò"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "ÌåôáðÞäçóç óå êáíïíéêü ôñüðï ëåéôïõñãßáò"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Áêýñùóç ôåëåõôáßáò ðñÜîçò"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Íá óõíå÷éóù;"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "¸îïäïò ÷ùñßò áðïèÞêåõóç"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "¸îïäïò ÷ùñßò áðïèÞêåõóç ôïõ ðßíáêá êáôáôìÞóåùí;"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "ÈÝëåôå íá äïêéìÜóåôå ôéò ñõèìßóåéò;"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Áõôïìáôç êáôáíïìÞ"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Êáèáñéóìüò üëùí"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "¶ëëá"
-
-#: ../../diskdrake_interactive.pm_.c:250
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Åíôïðéóìüò óêëçñïý äßóêïõ"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr ""
-"Äåí õðÜñ÷åé áñêåôüò åëåýèåñïò ÷þñïò ãéá áõôüìáôç äçìéïõñãßá íÝùí êáôáôìÞóåùí"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "¼ëåò ïé ðñùôåýïõóåò êáôáôìÞóåéò åßíáé óå ÷ñÞóç"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Äåí ìðïñþ íá ðñïóèÝóù êáôáôìçóåéò"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Ãéá íá ðñïóèÝóåôå êáôáôìÞóåéò, ðáñáêáëþ äéáãñÜøôå ìßá åôóé þóôåíá åßíáé "
-"äõíáôÞ ç ðñïóèÞêç åêôåôáìÝíçò êáôÜôìçóçò"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "ÁðïèÞêåõóç ðßíáêá êáôáôìÞóåùí"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Ðßíáêáò êáôáôìÞóåùí äéÜóùóçò"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Ðßíáêáò êáôáôìÞóåùí äéÜóùóçò"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Ðßíáêáò êáôáôìÞóåùí äéÜóùóçò"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Áõôüìáôç óýíäåóç áðïóðþìåíùí ìïíÜäùí áðïèÞêåõóçò"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "ÅðéëÝîôå áñ÷åßï"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Ï åöåäñéêüò ðßíáêáò êáôáôìÞóåùí Ý÷åé äéáöïñåôéêü ìÝãåèïò\n"
-"Íá óõíå÷ßóù;"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Ðñïåéäïðïßçóç"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"ÅéóÜãåôå ìéá äéóêÝôôá óôïí ïäçãü äéóêÝôôáò\n"
-"¼ëá ôá äåäïìÝíá óå áõôÞ ôç äéóêÝôôá èá ÷áèïýí"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "ÐñïóðÜèåéá äéÜóùóçò ðßíáêá êáôáôìÞóåùí"
-
-#: ../../diskdrake_interactive.pm_.c:340
-#, fuzzy
-msgid "Detailed information"
-msgstr "ÐñïâïëÞ ðëçñïöïñéþí"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "ÁëëáãÞ ìåãÝèïõò"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Ìåôáêßíçóç"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Ìïñöïðïßçóç"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Åíåñãü"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "ÐñïóèÞêç óôï RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "ÐñïóèÞêç óôï LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Áöáßñåóç áðü ôï RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Áöáßñåóç áðü ôï LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Ôñïðïðïßçóç RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "×ñÞóç ãéá loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Äçìéïõñãßá íÝáò êáôÜôìçóçò"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Áñ÷Þ óôïí ôïìÝá: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "ÌÝãåèïò óå MB"
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Ôýðïò óõóôÞìáôïò áñ÷åßùí: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Óçìåßï óýíäåóçò: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Ðñïôßìçóç: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Ìïñöïðïßçóç áñ÷åßïõ loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "ÁëëáãÞ ôýðïõ êáôÜôìçóçò"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "ÁëëáãÞ áðü ext2 óå ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Ðïý èÝëåôå íá óõíäÝóåôå ôï áñ÷åßï loopback %s;"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Äåí ìðïñþ íá áöáéñÝóù ôï óçìåßï óýíäåóçò êáèþò áõôÞ ç êáôÜôìçóç "
-"÷ñçóéìïðïéåßôáé\n"
-"ãéá loopback. ÁöáéñÝóôå ðñþôá ôï loopback"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Õðïëïãéóìüò fat filesystem bounds"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "ÌåôáâïëÞ ìåãÝèïõò"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Áõôüò ï ôýðïò êáôÜôìçóçò äåí ìðïñåß í' áëëÜîåé ìÝãåèïò."
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"ÐñÝðåé íá ãßíåé áíôßãñáöï áóöáëåßáò üëùí ôùí äåäïìÝíùí óå áõôÞ ôçí êáôÜôìçóç"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"ÌåôÜ ôçí áëëáãÞ ìåãÝèïõò óôçí êáôÜôìçóç %s, üëá ôá äåäïìÝíá óå áõôÞí ôçí "
-"êáôÜôìçóç èá ÷áèïýí"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "ÅðéëÝîôå ôï íÝï ìÝãåèïò"
-
-#: ../../diskdrake_interactive.pm_.c:591
-#, fuzzy
-msgid "New size in MB: "
-msgstr "ÌÝãåèïò óå MB"
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Óå ðïéüí äßóêï èÝëåôå íá ìåôáêéíçèåßôå;"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "ÔïìÝáò"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Óå ðïéüí ôïìÝá èÝëåôå íá ìåôáêéíçèåßôå;"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Ìåôáêßíçóç óå åîÝëéîç"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Ìåôáêßíçóç êáôÜôìçóçò óå åîÝëéîç..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "ÅðéëÝîôå Ýíá õðÜñ÷ïí RAID óôï ïðïßï èá ãßíåé ç ðñïóèÞêç"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "íÝï"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "ÅðéëÝîôå Ýíá õðÜñ÷ïí LVM óôï ïðïßï èá ãßíåé ç ðñïóèÞêç"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "üíïìá LVM;"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "ÁõôÞ ç êáôÜôìçóç äåí ìðïñåß íá ÷ñçóéìïðïéçèåß ãéá loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "¼íïìá áñ÷åßïõ loopback: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Ðñáãìáôéêü üíïìá"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Ôï áñ÷åßï ÷ñçóéìðïðïéåßôáé Þäç, åðéëÝîôå Ýíá Üëëï"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Ôï áñ÷åßï õðÜñ÷åé Þäç. Íá ôï ÷ñçóéìïðïéÞóù;"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "óõóêåõÞ"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "åðßðåäï"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "ìÝãåèïò chunk"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Ðñïóï÷Þ: ÁõôÞ ç äéáäéêáóßá åßíáé åðéêßíäõíç."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Ôß ôýðïõ partitioning;"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Óõããíþìç, áëëÜ äåí ìðïñþ íá äçìéïõñãÞóù ôïí êáôÜëïãï /boot óå êýëéíäñï "
-"ìåãáëýôåñï ôïõ 1024.\n"
-"Åßôå ÷ñçóéìïðïéåßôå LILO êáé äåí èá äïõëÝøåé, åßôå äåí ÷ñçóéìïðïéåßôåLILO "
-"êáé äåí ÷ñåéÜæåóôå ôï /boot"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Ç êáôÜôìçóç ðïõ åðéëÝîáôå ùò root (/) âñßóêåôáé ìåôÜ ôïí êýëéíäñï 1024 êáé\n"
-"äåí Ý÷åôå êáôÜôìçóç /boot.\n"
-"Áí óêïðåýåôå íá ÷ñçóéìïðïéÞóåôå LILO, ðñïóèÝóôå ìßá êáôÜôìçóç /boot."
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"ÅðéëÝîáôå ìéá software RAID êáôÜôìçóç ùò root (/).\n"
-"ÊáíÝíá ðñüãñáììá åêêßíçóçò äåí ìðïñåß íá ôï ÷åéñéóôåß áõôü ÷ùñßò ìéá "
-"êáôÜôìçóç /boot.\n"
-"Öñïíôßóôå ëïéðüí íá ðñïóèÝóåôå ìéá êáôÜôìçóç /boot."
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Ï ðßíáêáò êáôáôìÞóåùí ôïõ äßóêïõ %s èá áðïèçêåõôåß óôïí äßóêï!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Áðáéôåßôáé åðáíåêêßíçóç ãéá íá åöáñìïóôïýí ïé áëëáãÝò"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"ÌåôÜ ôçí ìïñöïðïßçóç ôçò êáôÜôìçóçò %s, üëá ôá äåäïìÝíá óå áõôÞí ôçí "
-"êáôÜôìçóç èá ÷áèïýí"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Ìïñöïðïßçóç"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Ìïñöïðïßçóç áñ÷åßïõ loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Ìïñöïðïßçóç êáôÜôìçóçò %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "áðïôõ÷ßá mkraid"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Äåí õðÜñ÷åé áñêåôüò åëåýèåñïò ÷þñïò ãéá äçìéïõñãßá íÝùí êáôáôìÞóåùí"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Äåí õðÜñ÷åé áñêåôüò åëåýèåñïò ÷þñïò ãéá äçìéïõñãßá íÝùí êáôáôìÞóåùí"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "ÁíÜëõóç: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "ÓõóêåõÞ: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Ðéèáíü DOS ãñÜììá äßóêïõ: %s \n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Ôýðïò: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "¼íïìá: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Áñ÷Þ: ôïìÝáò %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "ÌÝãåèïò: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ôïìåßò"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Êýëéíäñïò %d åþò êýëéíäñïò %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "ÌïñöïðïéçìÝíïò\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Áìïñöïðïßçôïò\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "ÓõíäåäåìÝíïò\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Áñ÷åßá loopback: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"ÊáôÜôìçóç åêêßíçóçò åî ïñéóìïý\n"
-"    (áðü MS-DOS, ü÷é áðü lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Åðßðåäï %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "ÌÝãåèïò chunk %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Äßóêïé RAID %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "¼íïìá áñ÷åßïõ loopback: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Ïé ðéèáíüôçôåò åßíáé, áõôÞ ç êáôÜôìçóç íá åßíáé\n"
-"ìéá êáôÜôìçóç Ïäçãþí, èá ðñÝðåé ðéèáíüôáôá\n"
-"íá ôçí áöÞóåôå Þóõ÷ç.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"ÁõôÞ åßíáé åéäéêÞ Bootstrap\n"
-"êáôÜôìçóç ãéá\n"
-"dual-booting ôï óýóôçìÜ óáò.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "ÌÝãåèïò: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ãåùìåôñßá: %s êýëéíäñïé, %s êåöáëÝò, %s ôïìåßò\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Ðëçñïöïñßåò: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Äßóêïé LVM %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Ôýðïò ðßíáêá êáôáôìÞóåùí: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "óôï bus %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "ÅðéëïãÝò: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ìïñöïðïßçóç ôïõ %s áðÝôõ÷å"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "äåí îÝñù ðþò íá ìïñöïðïéÞóù ôï %s óå ôýðï %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "óýíäåóç áðÝôõ÷å"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "ôï fsck áðÝôõ÷å ìå êùäéêü åîüäïõ %d Þ óÞìá %d"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "óýíäåóç áðÝôõ÷å: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "óöÜëìá êáôÜ ôçí áðïóýíäåóç ôïõ %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "áðëü"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "åîõðçñåôçôÞò"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-"Äåí ìðïñåßôå íá ÷ñçóéìïðïéÞóåôå ôï JFS ãéá êáôáôìÞóåéò ìéêñüôåñåò áðü 16MB"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-"Äåí ìðïñåßôå íá ÷ñçóéìïðïéÞóåôå ôï ReiserFS ãéá êáôáôìÞóåéò ìéêñüôåñåò áðü "
-"32MB"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Ôï óçìåßï óýíäåóçò ðñÝðåé íá îåêéíÜåé ìå /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "ÕðÜñ÷åé Þäç êáôÜôìçóç ìå óçìåßï óýíäåóçò %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Äåí ìðïñåßôå íá ÷ñçóéìïðïéÞóåôå ìéá êáôÜôìçóç LVM ãéá ðñïóÜñôçóç %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-"Áõôüò ï êáôÜëïãïò ðñÝðåé íá ðáñáìåßíåé óôï ñéæéêü óýóôçìá áñ÷åßùí (root)"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"×ñåéÜæåóôå Ýíá ðñáãìáôéêü óýóôçìá áñ÷åßùí (ext2, reiserfs) ãéá áõôü ôï "
-"óçìåßï óýíäåóçò\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "ÓöÜëìá êáôÜ ôï Üíïéãìá ôïõ %s ãéá åããñáöÞ: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"ÐñïêëÞèçêå óöÜëìá - äåí âñÝèçêáí óõóêåõÝò óôéò ïðïßåò íá åßíáé äõíáôÞç "
-"äçìéïõñãßá íÝùí óõóôçìÜôùí áñ÷åßùí. Ðáñáêáëþ åëåãîôå ôï õëéêü óáò ãéáôçí "
-"áéôßá áõôïý ôïõ ðñïâëÞìáôïò"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Äåí õðÜñ÷åé êáìßá êáôÜôìçóç!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"ÐáñáðÜíù âëÝðåôå Ýíáí êáôÜëïãï ìå ôéò êáôáôìÞóåéò Linux ðïõ åíôïðßóôçêáí "
-"óôïí \n"
-"äßóêï óáò. Ìðïñåßôå íá êñáôÞóåôå ôéò áõôüìáôåò åðéëïãÝò, åßíáé êáëÝò ãéá \n"
-"óõíçèéóìÝíç ÷ñÞóç. ÅÜí áëëÜîåôå áõôÝò ôéò åðéëïãÝò, ðñÝðåé íá Ý÷åôå "
-"ôïõëÜ÷éóôïí\n"
-"ìéá âáóéêÞ êáôÜôìçóç (root, \"/\"). Ìçí åðéëÝîåôå ìéá ðïëý ìéêñÞ êáôÜôìçóç "
-"ãéáôß\n"
-"äåí èá Ý÷åôå ÷þñï ãéá åãêáôÜóôáóç ëïãéóìéêïý. ÅÜí èÝëåôå íá áðïèçêåýåôå ôá "
-"äåäïìÝíá\n"
-"óáò óå îå÷ùñéóôÞ êáôÜôìçóç, ðñÝðåé íá åðéëÝîåôå ìéá êáôÜôìçóç ãéá \"/home"
-"\" (äõíáôüí\n"
-"ìüíï áí Ý÷åôå ðáñáðÜíù áðü ìßá Linux êáôÜôìçóç äéáèÝóéìç).\n"
-"\n"
-"\n"
-"ÐëçñïöïñéáêÜ, êÜèå êáôÜôìçóç áíáöÝñåôáé ùò: \"¼íïìá\", \"×ùñçôéêüôçôá\".\n"
-"\n"
-"\n"
-"Ôï üíïìá óçìáßíåé ôá åîÞò: Ôýðïò äßóêïõ, áñéèìüò äßóêïõ, áñéèìüò "
-"êáôÜôìçóçò \n"
-"ãéá ðáñÜäåéãìá, \"hda1\").\n"
-"\n"
-"\n"
-"Ï ôýðïò åßíáé \"hd\" åÜí ðñüêåéôáé ãéá äßóêï IDE êáé \"sd\" ãéá SCSI äßóêï.\n"
-"\n"
-"\n"
-"Ï áñéèìüò äßóêïõ åßíáé ðÜíôá Ýíá ãñÜììá ìåôÜ ôï \"hd\" Þ \"sd\". Ãéá ôïõò "
-"IDE \n"
-"äßóêïõò: \n"
-"\n"
-"   * \"a\" åßíáé ï master äßóêïò óôïí ðñþôï åëåãêôÞ IDE,\n"
-"\n"
-"   * \"b\" åßíáé ï slave äßóêïò óôïí ðñþôï åëåãêôÞ IDE,\n"
-"\n"
-"   * \"c\" åßíáé ï master äßóêïò óôïí äåýôåñï åëåãêôÞ IDE,\n"
-"\n"
-"   * \"d\" åßíáé ï slave äßóêïò óôïí äåýôåñï åëåãêôÞ IDE.\n"
-"\n"
-"\n"
-"Ãéá äßóêïõò SCSI, \"a\" åßíáé ï ðñþôïò äßóêïò, \"b\" åßíáé ï äåýôåñïò äßóêïò "
-"êëð..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Ìðïñåßôå ôþñá íá åðéëÝîåôå ðïéÝò õðçñåóßåò èÝëåôå íá îåêéíïýí êáôÜ ôçí \n"
-"åêêßíçóç.\n"
-"\n"
-"\n"
-"ÅÜí ìåôáêéíÞóåôå ôïí äñïìÝá ôïõ ðïíôéêéïý ðÜíù óå ìßá áðü áõôÝò, \n"
-"èá åìöáíéóôåß Ýíá ìðáëïíÜêé âïçèåßáò ðïõ èá åîçãåß ôïí ñüëï ôçò.\n"
-"\n"
-"\n"
-"ÐñïóÝîôå áõôü ôï âÞìá åÜí óêïðåýåôå íá ÷ñçóéìïðïéÞóåôå óôï óýóôçìá óáí \n"
-"åîõðçñåôçôÞ. Äåí èá èÝëáôå íá îåêéíÞóåôå õðçñåóßåò ðïõ äåí ÷ñåéÜæåóôå, \n"
-"äéüôé ïñéóìÝíåò õðçñåóßåò åìðåñéÝ÷ïõí êéíäýíïõò áóöáëåßáò åÜí õðÜñ÷ïõí \n"
-"óå åîõðçñåôçôÞ.\n"
-"ÃåíéêÜ, åðéëÝîôå ìüíï ôéò õðçñåóßåò ðïõ ÷ñåéÜæåóôå ðñáãìáôéêÜ."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"Ôï GNU/Linux ÷åéñßæåôáé ôçí þñá óå GMT (\"Greenwich Mean Time\" Þ \n"
-"\"ÌåóçìâñéíÞ ¿ñá ÃêñÞíïõéôò\") êáé ôçí ìåôáôñÝðåé óå ôïðéêÞ þñá\n"
-"âÜóåé ôçò æþíçò þñáò ðïõ èá åðéëÝîåôå."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-#, fuzzy
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Óå áõôü ôï óçìåßï, ðñÝðåé íá áðïöáóßóåôå ðïý èá åãêáôáóôÞóåôå ôï GNU/Linux\n"
-"óôïí óêëçñü óáò äßóêï. ÅÜí åßíáé Üäåéïò Þ åÜí Ýíá Üëëï ëåéôïõñãéêü "
-"÷ñçóéìïðïéåß\n"
-"üëïí ôïí ÷þñï, èá ÷ñåéáóôåß íá ôïí êáôáôìÞóåôå, äçëáäÞ íá êÜíåôå Ýíáí ëïãéêü "
-"äéá÷ùñéóìü\n"
-"ôïõ äßóêïõ óå äéáìåñßóìáôá, þóôå íá äçìéïõñãÞóåôå ÷þñï ãéá ôçí åãêáôÜóôáóç "
-"ôïõ Mandrake Linux.\n"
-"\n"
-"\n"
-"ÅðåéäÞ ç êáôÜôìçóç åßíáé óõíÞèùò ìéá ìç áíôéóôñåðôÞ åñãáóßá, ìðïñåß íá åßíáé "
-"äýóêïëç êáé \n"
-"áã÷ùôéêÞ ãéá Ýíáí áñ÷Üñéï ÷ñÞóôç.\n"
-"Áõôü ôï ðñüãñáììá áðëïðïéåß ôçí äéáäéêáóßá. Ðñéí áñ÷ßóåôå, ðáñáêáëþ "
-"óõìâïõëåõèåßôå ôï \n"
-"åã÷åéñßäéï ÷ñÞóçò êáé ìçí âéáóôåßôå.\n"
-"\n"
-"\n"
-"Èá ÷ñåéáóôåßôå ôïõëÜ÷éóôïí äýï êáôáôìÞóåéò. Ìßá ãéá ôï ëåéôïõñãéêü óýóôçìá "
-"êáé Üëëç ìßá ãéá \n"
-"ôçí åéêïíéêÞ ìíÞìç (swap).\n"
-"\n"
-"\n"
-"ÅÜí õðÜñ÷ïõí Þäç êáôáôìÞóåéò áðü ðñïçãïýìåíç åãêáôÜóôáóç Þ áðü Üëëï "
-"åñãáëåßï, èá ÷ñåéáóôåß\n"
-"áðëþò íá åðéëÝîåôå óå ðïéÝò áðü áõôÝò èá åãêáôáóôÞóåôå ôï Linux óáò.\n"
-"\n"
-"\n"
-"ÅÜí äåí õðÜñ÷ïõí êáôáôìÞóåéò, ðñÝðåé íá ôéò äçìéïõñãÞóåôå ìå ôï ðáñáðÜíù "
-"åñãáëÝéï. ÁíÜëïãá ìå \n"
-"ôçí êáôÜóôáóç ôïõ äßóêïõ óáò, õðÜñ÷ïõí äéÜöïñåò ëýóåéò:\n"
-"\n"
-"* ×ñÞóç õðÜñ÷ïíôùí êáôáôìÞóåùí: ÂñÝèçêáí ìßá Þ ðåñéóóüôåñåò êáôáôìÞóåéò "
-"Linux óôï óýóôçìÜ óáò.\n"
-"  ÅÜí èÝëåôå íá ôéò êñáôÞóåôå, åðéëÝîôå áõôÞí ôçí åðéëïãÞ.\n"
-"\n"
-"\n"
-"* ÄéáãñáöÞ ïëüêëçñïõ ôïõ äßóêïõ: ÅÜí èÝëåôå íá äéáãñÜøåôå üëá ôá äåäïìÝíá "
-"êáé üëåò ôéò õðÜñ÷ïõóåò\n"
-"  êáôáôìÞóåéò êáé íá ôá áíéêáôáóôÞóåôå ìå ôï íÝï óáò Mandrake Linux óýóôçìá, "
-"åðéëÝîôå áõôÞí ôçí \n"
-"  åðéëïãÞ. ÐÑÏÓÏ×Ç: Äåí õðÜñ÷åé ôñüðïò íá áíôéóôñÝøåôå ôçí äéáäéêáóßá\n"
-"  áí áëëÜîåôå ãíþìç áñãüôåñá! ¼ëá ôá äåäïìÝíá èá êáôáóôñáöïýí!\n"
-"\n"
-"\n"
-"* ×ñÞóç åëåýèåñïõ ÷þñïõ óôçí êáôÜôìçóç ôùí Windows: ÅÜí Ý÷åôå åãêáôåóôçìÝíá "
-"ôá Microsoft Windows\n"
-"  êáé êáôáëáìâÜíïõí üëï ôïí ÷þñï ôïõ äßóêïõ, ðñÝðåé íá äçìéïõññãÞóåôå "
-"åëÝõèåñï ÷þñï ãéá ôï Linux.\n"
-"  Ãéá íá ãßíåé áõôü, ìðïñåßôå åßôå íá äéáãñÜøåôå ôçí êáôÜôìçóç ôùí Windows "
-"êáé üëá ôá äåäïìÝíá ôïõò\n"
-"  (äåò \"ÄéáãñáöÞ ïëüêëçñïõ ôïõ äßóêïõ\" Þ \"Åéäéêüò\") Þ íá óõññéêíþóåôå "
-"ôçí êáôÜôìçóç ôùí Windows.\n"
-"  Ç óõññßêíùóç ìðïñåß íá ãßíåé ÷ùñßò áðþëåéá äåäïìÝíùí. ÁõôÞ ç ëýóç "
-"óõíßóôáôáé åÜí èÝëåôå íá ÷ñçóéìïðïéåßôå\n"
-"  Microsoft Windows êáé Mandrake Linux óôïí ßäéï õðïëïãéóôÞ.\n"
-"\n"
-"\n"
-"  Ðñéí áðïöáóßóåôå íá óõññéêíþóåôå ôïí äßóêï, ðñÝðåé íá êáôáëÜâåôå üôé ìåôÜ "
-"áðü áõôÞí ôçí äéáäéêáóßá\n"
-"  èá Ý÷åôå ëéãüôåñï ÷þñï äéáèÝóéìï áðü ôá Windows ãéá áðïèÞêåõóç äåäïìÝíùí Þ "
-"åãêáôÜóôáóç åöáñìïãþí.\n"
-"\n"
-"\n"
-"* Åéäéêüò: ÅÜí èÝëåôå íá êáôáôìÞóåôå åóåßò ôïí äßóêï óáò, ÷ùñßò áõôüìáôåò "
-"áðïöÜóåéò. Åßíáé ìéá \n"
-"  åðéëïãÞ ìå ðïëëÝò äõíáôüôçôåò áëëÜ åðéêßíäõíç, ìéá êáé ìðïñåßôå íá ÷Üóåôå "
-"üëá ôá äåäïìÝíá óáò\n"
-"  åÜí êÜíåôå êÜðïéï ëÜèïò. Âåâáéùèåßôå üôé îÝñåôå ôé êÜíåôå ðñùôïý "
-"ðñï÷ùñÞóåôå."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Ïé íÝåò êáôáôìÞóåéò ðñÝðåé íá öïñìáñéóôïýí (äçëáäÞ íá äçìéïõñãçèåß Ýíá "
-"óýóôçìá\n"
-"áñ÷åßùí) ðñùôïý ÷ñçóéìïðïéçèïýí.\n"
-"\n"
-"\n"
-"Ìðïñåßôå åðßóçò íá öïñìÜñåôå êÜðïéåò ðñïûðÜñ÷ïõóåò êáôáôìÞóåéò ãéá íá "
-"äéáãñÜøåôå \n"
-"ôá äåäïìÝíá ôïõò. ÅÜí èÝëåôå êÜôé ôÝôïéï, ðáñáêáëþ åðéëÝîôå ôéò êáôáôìÞóåéò "
-"ðïõ \n"
-"èÝëåôå íá öïñìÜñåôå.\n"
-"\n"
-"\n"
-"Óçìåéþóôå üôé äåí åßíáé áðáñáßôçôï íá öïñìÜñåôå üëåò ôéò ðñïûðÜñ÷ïõóåò "
-"êáôáôìÞóåéò.\n"
-"ÐñÝðåé íá öïñìÜñåôå ôéò êáôáôìÞóåéò ðïõ ðåñéÝ÷ïõí ôï ëåéôïõñãéêü óýóôçìá "
-"(üðùò ïé \n"
-"\"/\", \"/usr\" êáé \"/var\"), áëëÜ äåí ÷ñåéÜæåôáé íá öïñìÜñåôå êáôáôìÞóåéò "
-"ðïõ ðåñéÝ÷ïõí \n"
-"äåäïìÝíá ðïõ èÝëåôå íá êñáôÞóåôå (óõíÞèùò ç \"/home\").\n"
-"\n"
-"\n"
-"Ðáñáêáëþ íá åßóôå ðñïóåêôéêïß êáèþò ìåôÜ áðü áõôÞí ôçí äéáäéêáóßá üëá ôá "
-"äåäïìÝíá \n"
-"óôéò êáôáôìÞóåéò áõôÝò èá ÷áèïýí áìåôÜêëçôá.\n"
-"\n"
-"\n"
-"ÐáôÞóôå \"OK\" üôáí åßóôå Ýôïéìïé íá îåêéíÞóåôå ôçí äéáäéêáóßá.\n"
-"\n"
-"\n"
-"ÐáôÞóôå \"Áêýñùóç\" åÜí èÝëåôå íá áëëÜîåôå ôéò åðéëïãÝò óáò êáé íá "
-"÷ñçóéìïðïéÞóåôå \n"
-"Üëëåò êáôáôìÞóåéò ãéá ôçí åãêáôÜóôáóç ôïõ Mandrake Linux."
-
-#: ../../help.pm_.c:376
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Ôï íÝï óáò ëåéôïõñãéêü óýóôçìá Mandrake Linux åãêáèßóôáôáé.\n"
-"ÁõôÞ ç äéáäéêáóßá èá ðÜñåé êÜðïéá þñá, áíÜëïãá ìå ôï ìÝãåèïò \n"
-"ôçò åãêáôóôáóçò ðïõ åðéëÝîáôå êáé ôçí ôá÷ýôçôá ôïõ õðïëïãéóôÞ óáò.\n"
-"\n"
-"\n"
-"Ðáñáêáëþ ðåñéìÝíåôå õðïìïíåôéêÜ."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-#, fuzzy
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Óå áõôü ôï óçìåßï, èá ÷ñåéáóôåß íá åðéëÝîåôå óå ðïéÝò êáôáôìÞóåéò èá "
-"åãêáôáóôÞóåôå \n"
-"ôï Mandrake Linux. ÅÜí ðñïûðÜñ÷ïõí êáôáôìÞóåéò, áðü ðáëáéüôåñç åãêáôÜóôáóç Þ "
-"áðü \n"
-"Üëëï åñãáëåßï, ìðïñåßôå íá ôéò ÷ñçóéìïðïéÞóåôå. Áëëéþò, èá ðñÝðåé íá "
-"ïñßóåôå \n"
-"íÝåò êáôáôìÞóåéò.\n"
-"\n"
-"\n"
-"Ãéá íá äçìéïõñãÞóåôå êáôáôìÞóåéò, ðñÝðåé ðñþôá íá åðéëÝîåôå óêëçñü äßóêï, "
-"êÜíïíôáò\n"
-"êëéê ìå ôï ðïíôßêé óôï \"hda\" óôïí ðñþôï IDE äßóêï, \"hdb\" óôïí äåýôåñï "
-"IDE, \"sda\"\n"
-"óôïí ðñþôï SCSI äßóêï êëð\n"
-"\n"
-"\n"
-"Ãéá íá êáôáôìÞóåôå äßóêï óáò, ìðïñåßôå íá åðéëÝîåôå:\n"
-"\n"
-"   * ÐëÞñçò äéáãñáöÞ: áõôÞ ç åðéëïãÞ äéáãñÜöåé üëåò ôéò êáôáôìÞóåéò ôïõ \n"
-"     åðéëåãìÝíïõ äßóêïõ.\n"
-"\n"
-"\n"
-"   * Áõôüìáôç åðéëïãÞ: ÁõôÞ ç åðéëïãÞ äçìéïõñãåß áõôüìáôá êáôáôìÞóåéò \n"
-"     ext2 êáé swap óôïí åëåýèåñï ÷þñï ôïõ äßóêïõ.\n"
-"\n"
-"\n"
-"   * ÄéÜóùóç ðßíáêá êáôáôìÞóåùí: ÅÜí ï ðßíáêáò êáôáôìÞóåùí åßíáé "
-"êáôåóôñáìÝíïò,\n"
-"     ìðïñåßôå íá ðñïóðáèÞóåôå íá ôïí åðáíáöÝñåôå. Ðáñáêáëþ íá åßóôå "
-"ðñïóåêôéêïß\n"
-"     êáé íá èõìÜóôå üôé ìðïñåß íá áðïôý÷åé.\n"
-"\n"
-"\n"
-"   * Áêýñùóç: Ãéá íá áêõñþóåôå ü,ôé Ý÷åôå êÜíåé.\n"
-"\n"
-"\n"
-"   * Åðáíáöüñôùóç: Ãéá íá áêõñþóåôå ü,ôé Ý÷åôå êÜíåé êáé íá îáíáöïñôþóåôå "
-"ôïí \n"
-"     áñ÷éêü óáò ðßíáêá êáôáôìÞóåùí.\n"
-"\n"
-"\n"
-"   * ÌÜãïò: ÅÜí èÝëåôå íá äçìéïõñãçèïýí ôåëÝéùò áõôüìáôá ïé êáôáôìÞóåéò. "
-"Óõíéóôþìåíç \n"
-"     åðéëïãÞ åÜí äåí Ý÷åôå êáëÞ ãíþóç ôçò äéáäéêáóßáò.\n"
-"\n"
-"\n"
-"   * Åðáíáöüñôùóç áðü äéóêÝôôá: ÅÜí åß÷áôå áðïèçêåýóåé ôïí ðßíáêá "
-"êáôáôìÞóåùí óå äéóêÝôôá\n"
-"     óå êÜðïéá ðñïçãïýìåíç åãêáôÜóôáóç, ìðïñåßôå íá ôïí åðáíáöÝñåôå. \n"
-"\n"
-"\n"
-"   * ÁðïèÞêåõóç óå äéóêÝôôá: Ãéá íá óþóåôå ôïí ðßíáêá êáôáôìÞóåùí óå "
-"äéóêÝôôá, þóôå íá \n"
-"     ìðïñåßôå íá ôïí åðáíáöÝñåôå. Ç ÷ñÞóç áõôÞò ôçò åðéëïãÞò óõíßóôáôáé.\n"
-"\n"
-"\n"
-"   * ÔÝëïò: ¼ôáí ôåëåéþóåôå ôçí êáôÜôìçóç, åðéëÝîôå áõôü ãéá íá êÜíåôå ôéò "
-"áëëáãÝò ìüíéìåò.\n"
-"\n"
-"\n"
-"ÐëçñïöïñéáêÜ, ìðïñåßôå íá åðéëÝîåôå üëåò ôéò åðéëïãÝò êáé ìÝóù "
-"ðëçêôñïëïãßïõ: \n"
-"Ìåôáêéíçèåßôå óôéò êáôáôìÞóåéò ÷ñçóéìïðïéþíôáò ôï ðëÞêôñï Tab êáé ôá "
-"âåëÜêéá.\n"
-"\n"
-"\n"
-"¼ôáí Ý÷åôå åðéëÝîåé ìéá êáôÜôìçóç, ìðïñåßôå íá ðáôÞóåôå:\n"
-"\n"
-"           * Ctrl-c ãéá äçìéïõñãßá êáôÜôìçóçò (üôáí Ý÷åôå åðéëÝîåé Üäåéï "
-"÷þñï)\n"
-"\n"
-"           * Ctrl-d ãéá äéáãñáöÞ êáôÜôìçóçò\n"
-"\n"
-"           * Ctrl-m ãéá ïñéóìü óçìåßïõ óýíäåóçò           \n"
-"\n"
-"           \n"
-"Åáí êÜíåôå åãêáôÜóôáóç óå Ýíá PPC ìç÷Üíçìá, èá èÝëåôå íá äçìéïõñãÞóåôå ìéá "
-"ìéêñÞ HFS 'bootstrap' êáôÜôìçóç ôïõëÜ÷éóôïí 1Ì ãéá ÷ñÞóç\n"
-"áðü ôïí yaboot bootloader. ÅÜí óêïðåýåôå íá êÜíåôå ôçí êáôÜôìçóç ìåãáëýôåñç, "
-"ð.÷. 50ÌÂ, ßóùò ôçí âñåßôå ÷ñÞóéìç ãéá áðïèÞêåõóç \n"
-"åíüò ðõñÞíá êáé ramdisk image ãéá åðßãïõóåò êáôáóôÜóåéò."
-
-#: ../../help.pm_.c:460
-#, fuzzy
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Ðåñéóóüôåñåò ôùí ìßá êáôáôìÞóåéò Windows âñÝèçêáí óôïí äßóêï óáò. Ðáñáêáëþ \n"
-"åðéëÝîôå ðïéÜ èÝëåôå íá óõññéêíþóåôå ãéá íá åãêáôáóôÞóåôå ôï Mandrake "
-"Linux.\n"
-"\n"
-"\n"
-"ÐëçñïöïñéáêÜ, êÜèå êáôÜôìçóç áíáöÝñåôáé ùò: \"¼íïìá Linux\", \"¼íïìá Windows"
-"\", \"×ùñçôéêüôçôá\".\n"
-"\n"
-"\n"
-"Ôï üíïìá Linux óçìáßíåé ôá åîÞò: Ôýðïò äßóêïõ, áñéèìüò äßóêïõ, áñéèìüò "
-"êáôÜôìçóçò \n"
-"ãéá ðáñÜäåéãìá, \"hda1\").\n"
-"\n"
-"\n"
-"Ï ôýðïò åßíáé \"hd\" åÜí ðñüêåéôáé ãéá äßóêï IDE êáé \"sd\" ãéá SCSI äßóêï.\n"
-"\n"
-"\n"
-"Ï áñéèìüò äßóêïõ åßíáé ðÜíôá Ýíá ãñÜììá ìåôÜ ôï \"hd\" Þ \"sd\". Ãéá ôïõò "
-"IDE \n"
-"äßóêïõò: \n"
-"\n"
-"   * \"a\" åßíáé ï master äßóêïò óôïí ðñþôï åëåãêôÞ IDE,\n"
-"\n"
-"   * \"b\" åßíáé ï slave äßóêïò óôïí ðñþôï åëåãêôÞ IDE,\n"
-"\n"
-"   * \"c\" åßíáé ï master äßóêïò óôïí äåýôåñï åëåãêôÞ IDE,\n"
-"\n"
-"   * \"d\" åßíáé ï slave äßóêïò óôïí äåýôåñï åëåãêôÞ IDE.\n"
-"\n"
-"\n"
-"Ãéá äßóêïõò SCSI, \"a\" åßíáé ï ðñþôïò äßóêïò, \"b\" åßíáé ï äåýôåñïò äßóêïò "
-"êëð...\n"
-"\n"
-"\n"
-"Ôï üíïìá Windows åßíáé ôï ãñÜììá ôçò êáôÜôìçóçò üðùò öáßíåôáé áðü ôá "
-"Windows\n"
-"(ï ðñþôïò äßóêïò Þ êáôÜôìçóç ëÝãåôáé \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Ðáñáêáëþ ðåñéìÝíåôå. ÁõôÞ ç äéáäéêáóßá ìðïñåß íá ðÜñåé ìåñéêÜ ëåðôÜ."
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Ðáñáêáëþ åðéëÝîôå \"ÅãêáôÜóôáóç\" åÜí äåí õðÜñ÷åé åãêáôåóôçìÝíç ðáëáéüôåñç "
-"Ýêäïóç ôïõ Mandrake Linux\n"
-"Þ åÜí èÝëåôå íá ÷ñçóéìïðïéÞóåôå ðåñéóóüôåñá ôïõ åíüò ëåéôïõñãéêÜ óõóôÞìáôá.\n"
-"\n"
-"\n"
-"ÅðéëÝîôå \"ÁíáâÜèìéóç\" åÜí èÝëåôå íá áíáâáèìßóåôå ìéá ðñïûðÜñ÷ïõóá "
-"åãêáôÜóôáóç ôïõ Mandrake Linux\n"
-"\n"
-"\n"
-"ÁíÜëïãá ìå ôéò ãíþóåéò óáò óôï GNU/Linux, ìðïñåßôå íá åðéëÝîåôå Ýíá áðü ôá "
-"ðáñáêÜôù åðßðåäá åãêáôÜóôáóçò\n"
-"Þ áíáâÜèìéóçò ôïõ Mandrake Linux:\n"
-"\n"
-"* Óõíéóôþìåíï: ÅÜí äåí Ý÷åôå îáíáåãêáôáóôÞóåé ðïôÝ Ýíá GNU/Linux óýóôçìá. Ç "
-"åãêáôÜóôáóç èá åßíáé \n"
-"  ðïëý åýêïëç êáé èá óáò æçôçèåß íá áðáíôÞóåôå ëßãåò åñùôÞóåéò.\n"
-"\n"
-"\n"
-"* ÐñïóáñìïóìÝíç: ÅÜí åßóôå åîïéêåéùìÝíïò ìå ôï GNU/Linux, ìðïñåßôå íá "
-"åðéëÝîåôå ôçí âáóéêÞ ÷ñÞóç\n"
-"  (åîõðçñåôçôÞò, óôáèìüò åñãáóßáò) ôïõ óõóôÞìáôüò óáò. Èá ÷ñåéáóôåß íá "
-"áðáíôÞóåôå óå ðåñéóóüôåñåò\n"
-"  åñùôÞóåéò, ïðüôå èá ðñÝðåé íá Ý÷åôå êÜðïéåò âáóéêÝò ãíþóåéò ó÷åôéêÜ ìå ôçí "
-"ëåéôïõñãßá ôïõ GNU/Linux.\n"
-"\n"
-"\n"
-"* Åéäéêüò: ÅÜí Ý÷åôå åìðåéñßá ìå ôï GNU/Linux. ¼ðùò êáé ðáñáðÜíù, ìðïñåßôå "
-"íá åðéëÝîåôå ôçí âáóéêÞ\n"
-"  ÷ñÞóç ôïõ óõóôÞìáôïò. Èá ìðïñÝóåôå åðßóçò íá ðñïóáñìüóåôå ôï óýóôçìá óôéò "
-"áíÜãêåò óáò ëåðôïìåñþò,\n"
-"  áëëÜ èá ÷ñåéáóôåß íá áðáíôÞóåôå óå åîåéäéêåõìÝíåò åñùôÞóåéò ðïõ "
-"ðñïûðïèÝôïõí åîåéäéêåõìÝíåò ãíþóåéò.\n"
-"  Âåâáéùèåßôå üôé îÝñåôå ôé êÜíåôå ðñùôïý åðéëÝîåôå áõôÞí ôçí åãêáôÜóôáóç."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Ðáñáêáëþ åðéëÝîôå ôçí êáôÜëëçëç èýñá. Ãéá ðáñÜäåéãìá,\n"
-"ç COM1 óôá Windows ïíïìÜæåôáé ttyS0 óôï GNU/Linux."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"Ôï LILO êáé ôï Grub åßíáé ðñïãñÜììáôá åêêßíçóçò: Ìðïñïýí íá åêêéíÞóïõí \n"
-"ôï GNU/Linux Þ ïðïéïäÞðïôå Üëëï ëåéôïõñãéêü õðÜñ÷åé óôï óýóôçìÜ óáò. "
-"ÊáíïíéêÜ, \n"
-"ôá åðéðëÝïí ëåéôïõñãéêÜ ðñïóäéïñßæïíôáé êáé ñõèìßæïíôáé óùóôÜ. ÅÜí áõôü "
-"äåí \n"
-"óõíÝâç, ìðïñåßôå íá ðñïóèÝóåôå åðéðëÝïí åðéëïãÝò óå áõôÞí ôçí ïèüíç. \n"
-"ÐñïóÝîôå íá åðéëÝîåôå ôéò óùóôÝò ðáñáìÝôñïõò.\n"
-"\n"
-"Ìðïñåßôå åðßóçò íá áðïêëåßóåôå ôçí ðñüóâáóç óå Üëëá ëåéôïõñãéêÜ óõóôÞìáôá "
-"áöáéñþíôáò\n"
-"ôéò áíôßóôïé÷åò åðéëïãÝò. Óå áõôÞí üìùò ôçí ðåñßðôùóç, èá ÷ñåéáóôåßôå "
-"äéóêÝôôá åêêßíçóçò\n"
-"ãéá íá ôá ÷ñçóéìïðïéÞóåôå!"
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"ÐñÝðåé íá ðñïóäéïñßóåôå ðïý èÝëåôå íá åãêáôáóôáèïýí ïé \n"
-"ðëçñïöïñßåò ðïõ åßíáé áðáñáßôçôåò ãéá ôçí åêêßíçóç ôïõ \n"
-"GNU/Linux.\n"
-"\n"
-"\n"
-"Åêôüò êáé áí îÝñåôå ðïëý êáëÜ ôé êÜíåôå, åðéëÝîôå \"Ðñþôïò ôïìÝáò\n"
-"ôïõ äßóêïõ (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"Ôï DrakX èá ðñïóðáèÞóåé íá åíôïðßóåé ðñïóáñìïãåßò SCSI ôýðïõ PCI.\n"
-"ÅÜí ôï DrakX åíôïðßóåé Ýíáí ðñïóáñìïãÝá ðïõ îÝñåé ðþò íá ôïí "
-"÷ñçóéìïðïéÞóåé,\n"
-"èá åãêáôáóôÞóåé áõôüìáôá ôïí êáôÜëëçëï ïäçãü\n"
-"\n"
-"\n"
-"ÅÜí Ý÷åôå ðñïóáñìïãÝá SCSI ôýðïõ ISA, êÜðïéïí ìÞ áíáãíùñßóéìï PCI "
-"ðñïóáñìïãÝá \n"
-"Þ äåí Ý÷åôå êáíÝíáí ðñïóáñìïãÝá SCSI, ôï DrakX èá óáò ñùôÞóåé åÜí Ý÷åôå "
-"êÜðïéïí \n"
-"ðñïóáñìïãÝá SCSI óôï óýóôçìÜ óáò. ÅÜí äåí Ý÷åôå, ðáôÞóôå áðëþò '¼÷é'. ÅÜí "
-"ðáôÞóåôå\n"
-"'Íáé', èá óáò æçôçèåß íá áðéëÝîåôå ôïí ôýðï ôïõ áðü Ýíáí êáôÜëïãï.\n"
-"\n"
-"\n"
-"ÅÜí åðéëÝîåôå ðñïóáñìïãÝá, ôï DrakX èá óáò ñùôÞóåé åÜí èÝëåôå íá ïñßóåôå "
-"åðéëïãÝò.\n"
-"ÓõíÞèùò, áöÞíïíôáò ôï DrakX íá ñõèìßóåé áõôüìáôá ôïí ðñïóáñìïãÝá, äåí èá "
-"Ý÷åôå ðñüâëçìá.\n"
-"\n"
-"\n"
-"Óå áíôßèåôç ðåñßðôùóç, èá ðñÝðåé íá äþóåôå åðéëïãÝò ãéá ôïí ïäçãü. \n"
-"Óõìâïõëåõôåßôå ôïí Ïäçãü ÅãêáôÜóôáóçò ãéá ôï ðþò èá âñåßôå áõôÝò ôéò \n"
-"ðëçñïöïñßåò áðü ôçí åãêáôÜóôáóç ôùí Windows (áí õðÜñ÷åé), áðü ôçí "
-"ôåêìçñßùóç\n"
-"ôïõ õëéêïý Þ áðü ôçí éóôïóåëßäá ôïõ êáôáóêåõáóôÞ (áí Ý÷åôå ðñüóâáóç óôï "
-"Internet)."
-
-#: ../../help.pm_.c:720
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"You can add additional entries for yaboot, either for other operating "
-"systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"\n"
-"For other OS's - the entry consists only of a label and the root partition.\n"
-"\n"
-"\n"
-"For Linux, there are a few possible options: \n"
-"\n"
-"\n"
-"  - Label: This is simply the name will type at the yaboot prompt to select "
-"this \n"
-"boot option.\n"
-"\n"
-"\n"
-"  - Image: This would be the name of the kernel to boot.  Typically vmlinux "
-"or\n"
-"a variation of vmlinux with an extension.\n"
-"\n"
-"\n"
-"  - Root: The root device or '/' for your Linux installation.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: On Apple hardware, the kernel append option is used quite often "
-"to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button "
-"emulation\n"
-"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The "
-"following \n"
-"are some examples:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: This option can be used either to load initial modules, before "
-"the boot \n"
-"device is available, or to load a ramdisk image for an emergency boot "
-"situation.\n"
-"\n"
-"\n"
-"  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you "
-"should need\n"
-"to allocate a large ramdisk, this option can be used.\n"
-"\n"
-"\n"
-"  - Read-write: Normally the 'root' partition is initially brought up read-"
-"only, to allow\n"
-"a filesystem check before the system becomes 'live'.  You can override this "
-"option here.\n"
-"\n"
-"\n"
-"  - NoVideo: Should the Apple video hardware prove to be exceptionally "
-"problematic, you can\n"
-"select this option to boot in 'novideo' mode, with native framebuffer "
-"support.\n"
-"\n"
-"\n"
-"  - Default: Selects this entry as being the default Linux selection, "
-"selectable by just\n"
-"pressing ENTER at the yaboot prompt.  This entry will also be highlighted "
-"with a '*', if you\n"
-"press TAB to see the boot selections."
-
-#: ../../help.pm_.c:765
-#, fuzzy
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n"
-"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"Yaboot main options are:\n"
-"\n"
-"\n"
-"  - Init Message: A simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-"\n"
-"  - Boot Device: Indicate where you want to place the information required "
-"to \n"
-"boot to GNU/Linux. Generally, you will have setup a bootstrap partition "
-"earlier \n"
-"to hold this information.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: Unlike LILO, there are two delays available with \n"
-"yaboot.  The first delay is measured in seconds and at this point you can \n"
-"choose between CD, OF boot, MacOS, or Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: This timeout is similar to the LILO boot delay.  "
-"After \n"
-"selecting Linux, you will have this delay in 0.1 seconds before your "
-"default\n"
-"kernel description is selected.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: Checking this option will allow you to choose 'C' for "
-"CD at\n"
-"the first boot prompt.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: Checking this option will allow you to choose 'N' for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-"\n"
-"  - Default OS: You can select which OS will boot by default when the Open "
-"Firmware \n"
-"Delay expires."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"ÅðéëÝîôå ôïí äßóêï ðïõ èÝëåôå íá äéáãñÜøåôå ãéá íá åãêáôáóôÞóåôå \n"
-"ôçí íÝá êáôÜôìçóç Mandrake Linux. ÐÑÏÓÏ×Ç: ¼ëá ôá äåäïìÝíá èá äéáãñáöïýí\n"
-"êáé èá åßíáé áäýíáôç ç åðáíáöïñÜ ôïõò."
-
-#: ../../help.pm_.c:832
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"ÐáôÞóôå \"OK\" åÜí èÝëåôå íá äéáãñÜøåôå üëá ôá äåäïìÝíá êáé ôéò \n"
-"êáôáôìÞóåéò óå áõôüí ôïí äßóêï. Ðñïóï÷Þ, ìåôÜ áðü áõôü äåí èá ìðïñåßôå \n"
-"íá åðáíáöÝñåôå ïðïéáäÞðïôå äåäïìÝíá ðïõ âñßóêïíôáé áõôÞ ôç óôéãìÞ óôïí \n"
-"äßóêï, óõìðåñéëáìâáíïìÝíùí êáé ïðïéïíäÞðïôå äåäïìÝíùí áðü ôá Windows.\n"
-"\n"
-"\n"
-"ÐáôÞóôå \"Áêýñùóç\" ãéá íá áêõñþóåôå áõôÞí ôçí äéáäéêáóßá ÷ùñßò íá ÷Üóåôå \n"
-"äåäïìÝíá êáé êáôáôìÞóåéò ðïõ âñßóêïíôáé óôïí äßóêï."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"¸÷åôå åðéëÝîåé ôïõò ðáñáêÜôù åîõðçñåôçôÝò: %s\n"
-"\n"
-"\n"
-"Áõôïß ïé åîõðçñåôçôÝò åíåñãïðïéïýíôáé åî' ïñéóìïý. Äåí Ý÷ïõí êÜðïéá ãíùóôÜ "
-"ðñïâëÞìáôá\n"
-"áóöáëåßáò, áëëÜ ìðïñåß íá âñåèïýí êÜðïéá êáéíïýñéá. Óå áõôÞí ôçí ðåñßðôùóç, "
-"ðñÝðåé íá áíáâáèìßóåôå\n"
-"ôï óõíôïìüôåñï äõíáôüí.\n"
-"\n"
-"\n"
-"ÈÝëåôå íá åãêáôáóôÞóåôå áõôïýò ôïõò åîõðçñåôçôÝò;\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Äåí ìðïñþ íá ÷ñçóéìïðïéÞóù broadcast ÷ùñßò NIS domain"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "ÅéóÜãåôå ìéá FAT ìïñöïðïéçìÝíç äéóêÝôôá óôïí ïäçãü %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "ÁõôÞ ç äéóêÝôôá äåí åßíáé ìïñöïðïéçìÝíç FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Ãéá íá ÷ñçóéìïðïéÞóåôå áõôÞí ôçí áðïèçêåõìÝíç åðéëïãÞ ðáêÝôùí, îåêéíÞóôå ôçí "
-"åãêáôÜóôáóç ìå ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "ÓöÜëìá êáôÜ ôçí áíÜãíùóç ôïõ áñ÷åßïõ %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Ïê"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"¸íá ìÝñïò ôïõ õëéêïý óáò ÷ñåéÜæåôáé ``éäéüêôçôïõò'' ïäçãïýò ãéá íá "
-"ëåéôïõñãÞóåé.\n"
-"Ìðïñåßôå íá âñåßôå ó÷åôéêÝò ðëçñïöïñßåò óôï: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"ÐñÝðåé íá Ý÷åôå ìéá âáóéêÞ êáôÜôìçóç.\n"
-"ÄçìéoõñãÞóôå Þ åðéëÝîôå ìéá êáôÜôìçóç.\n"
-"ÌåôÜ ïñßóôå ùò óçìåßï óýíäåóçò ôï `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "ÐñÝðåé íá Ý÷åôå ìéá êáôÜôìçóç swap"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Äåí Ý÷åôå ïñßóåé êáôÜôìçóç swap\n"
-"\n"
-"Íá óõíå÷ßóù;"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "ÐñÝðåé íá Ý÷åôå ìéá êáôÜôìçóç FAT mounted óôï /boot/efi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "×ñÞóç åëåýèåñïõ ÷þñïõ"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Äåí õðÜñ÷åé áñêåôüò åëåýèåñïò ÷þñïò ãéá äçìéïõñãßá íÝùí êáôáôìÞóåùí"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "×ñÞóç õðÜñ÷ïíôùí êáôáôìÞóåùí"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Äåí õðÜñ÷ïõí êáôáôìÞóåéò ðñïò ÷ñÞóç"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "×ñÞóç êáôÜôìçóçò Windows ãéá loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "ÐïéÜ êáôÜôìçóç èÝëåôå íá ÷ñçóéìïðïéÞóåôå ãéá ôï Linux4Win;"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "ÅðéëÝîôå ôá ìåãÝèç"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "ÌÝãåèïò âáóéêÞò êáôÜôìçóçò óõóôÞìáôïò óå MB:"
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "ÌÝãåèïò êáôÜôìçóçò swap óå MB"
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "×ñÞóç ôïõ åëåýèåñïõ ÷þñïõ óôçí êáôÜôìçóç ôùí Windows"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Óå ôé ôýðï êáôÜôìçóçò èÝëåôå íá áëëÜîåôå ìÝãåèïò;"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Õðïëïãéóìüò ïñßùí óõóôÞìáôïò áñ÷åßùí Windows"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Äåí ìðïñþ íá áëëÜîù ìÝãåèïò óôçí êáôÜôìçóç FAT, \n"
-"ðñïêëÞèçêå ôï ðáñáêÜôù ëÜèïò: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Ç êáôÜôìçóç ôùí Windows åßíáé ðïëý êáôáêåñìáôéóìÝíç, ðáñáêáëþ ôñÝîôå ðñþôá "
-"ôï ``defrag'' "
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ÐÑÏÓÏ×Ç!\n"
-"\n"
-"Ôï DrakX ðñÝðåé ôþñá íá áëëÜîåé ôï ìÝãåèïò ôçò êáôÜôìçóçò ôùí Windows.\n"
-"Ç äéáäéêáóßá áõôÞ åìðåñéÝ÷åé êéíäýíïõò. ÅÜí äåí ôï Ý÷åôå êÜíåé Þäç,\n"
-"èá ðñÝðåé íá åëÝãîåôå ôçí êáôÜôìçóç ìå êÜðïéï ó÷åôéêü ðñüãñáììá (ð÷\n"
-"scandisk) êáé êáôÜ ðåñßðôùóç íá ôçí áðïêáôáêåñìáôïðïéÞóåôå (defragment).\n"
-"ÌåôÜ èá ðñÝðåé íá êñáôÞóåôå áíôßãñáöï áóöáëåßáò ôùí äåäïìÝíùí óáò.\n"
-"ÅÜí åßóôå óßãïõñïé, ðáôÞóôå Ok."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Ôé ÷þñï èÝëåôå íá êñáôÞóåôå ãéá ôá windows óôï"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "êáôÜôìçóç %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "ÁëëáãÞ ìåãÝèïõò FAT áðÝôõ÷å: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Äåí õðÜñ÷ïõí FAT êáôáôìÞóåéò ãéá áëëáãÞ ìåãÝèïõò Þ ãéá ÷ñÞóç ùò loopback (Þ "
-"äåí õðÜñ÷åé áñêåôüò ÷þñïò)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "ÄéáãñáöÞ ïëüêëçñïõ ôïõ äßóêïõ"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Áöáßñåóç Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"¸÷åôå ðåñéóóüôåñïõò áðü Ýíáí äßóêïõò, óå ðïéüí èÝëåôå íá åãêáôáóôÞóåôå ôï "
-"Linux;"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"¼ëåò ïé õðÜñ÷ïõóåò êáôáôìÞóåéò êáé ôá äåäïìÝíá ôïõò óôïí äßóêï %s èá ÷áèïýí"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "ÐñïóáñìïóìÝíåò êáôáôìÞóåéò äßóêïõ"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "×ñÞóç fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Ìðïñåßôå ôþñá íá êáôáôìÞóåôå ôïí äßóêï %s\n"
-"¼ôáí ôåëåéþóåôå, ìçí îå÷Üóåôå íá áðïèçêåýóåôå ðáôþíôáò `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Äåí Ý÷åôå áñêåôü åëåýèåñï ÷þñï óôçí êáôÜôìçóç ôùí Windows"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Äåí ìðïñþ íá âñþ áñêåôü ÷þñï ãéá åãêáôÜóôáóç"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Ôï DrakX âñÞêå ôéò ðáñáêÜôù ëýóåéò:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ç êáôÜôìçóç áðÝôõ÷å: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Åêêßíçóç äéêôýïõ"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "ÄéáêïðÞ ëåéôïõñãßáò äéêôýïõ."
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"ÐñïêëÞèçêå óöÜëìá ðïõ äåí îÝñù ðþò íá ôï ÷åéñéóôþ.\n"
-"ôïõ õëéêïý Þ áðü ôçí éóôïóåëßäá ôïõ êáôáóêåõáóôÞ (áí Ý÷åôå ðñüóâáóç óôï "
-"Internet).Óõíå÷ßóôå ìå äéêéÜ óáò åõèýíç."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Äéðëü óçìåßï óýíäåóçò %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"ÌåñéêÜ óçìáíôéêÜ ðáêÝôá äåí åãáôáóôÜèçêáí óùóôÜ.\n"
-"Ï ïäçãüò CD-ROM Þ ôï CD-ROM åßíáé åëëáôùìáôéêü.\n"
-"ÅëÝãîôå ôï CD-ROM óå Ýíá Üëëï óýóôçìá ÷ñçóéìïðïéþíôáò ôçí åíôïëÞ \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Êáëþò Þñèáôå óôï %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Äåí õðÜñ÷åé äéáèÝóéìïò ïäçãüò äéóêÝôôáò"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "ÂÞìá `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "ÅðéëÝîôå ôï ìÝãåèïò ðïõ èÝëåôå íá åãêáôáóôÞóåôå"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Óõíïëéêü ìÝãåèïò: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "¸êäïóç: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "ÌÝãåèïò: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "ÅðéëÝîôå ôá ðáêÝôá ðïõ èÝëåôå íá åãêáôáóôÞóåôå"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Ðëçñïöïñßåò"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "ÅãêáôÜóôáóç"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "ÅãêáôÜóôáóç"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Ðáñáêáëþ ðåñéìÝíåôå, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "ÅíáðïìÝíùí ÷ñüíïò "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Óõíïëéêüò ÷ñüíïò "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Ðñïåôïéìáóßá åãêáôÜóôáóçò"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "ÅãêáôÜóôáóç ðáêÝôïõ %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Íá óõíå÷ßóù;"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "ÐñïêëÞèçêå óöÜëìá êáôÜ ôçí ôáîéíüìçóç ôùí ðáêÝôùí:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Íá ÷ñçóéìïðïéÞóù ôéò õðÜñ÷ïõóåò ñõèìßóåéò ãéá ôá ×11;"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Ôï óýóôçìÜ óáò äåí Ý÷åé áñêåôïýò ðüñïõò. Ìðïñåß íá áíôéìåôùðßóåôå "
-"ðñïâëÞìáôá\n"
-"óôçí åãêáôÜóôáóç ôïõ Mandrake Linux. ÅÜí óõìâåß áõôü, ìðïñåßôå íá äïêéìÜóåôå "
-"åãêáôÜóôáóç êåéìÝíïõ.\n"
-"ÐáôÞóôå F1 êáôÜ ôçí åêêßíçóç áðü CDROM, ìåôÜ ãñÜøôå `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Ôýðïò åãêáôÜóôáóçò"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Ðáñáêáëþ åéóÜãåôå ôéò ðáñáêÜôù ðëçñïöïñßåò"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ôï óõíïëéêü ìÝãåèïò ôùí ïìÜäùí ðïõ åðéëÝîáôå åßíáé ðåñßðïõ %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"ÅÜí èÝëåôå íá åãêáôáóôÞóåôå ëéãüôåñá,\n"
-"åðéëÝîôå ôï ðïóïóôü ôùí ðáêÝôùí ðïõ èÝëåôå íá åãêáôáóôÞóåôå.\n"
-"\n"
-"¸íá ÷áìçëü ðïóïóôü èá åãêáôáóôÞóåé ìüíï ôá ðéï óçìáíôéêÜ ðáêÝôá.\n"
-"¸íá ðïóïóôü 100% èá åãêáôáóôÞóåé üëá ôá åðéëåãìÝíá ðáêÝôá."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"¸÷åôå óôï äßóêï óáò ÷þñï ìüíï ãéá ôï %d%% áõôþí ôùí ðáêÝôùí.\n"
-"\n"
-"ÅÜí èÝëåôå íá åãêáôáóôÞóåôå ëéãüôåñá áðü áõôÜ,\n"
-"åðéëÝîôå ôï ðïóïóôü ôùí ðáêÝôùí ðïõ èÝëåôå íá åãêáôáóôÞóåôå.\n"
-"¸íá ÷áìçëü ðïóïóôü èá åãêáôáóôÞóåé ìüíï ôá ðéï óçìáíôéêÜ ðáêÝôá.\n"
-"¸íá ðïóïóôü %d%% èá åãêáôáóôÞóåé üóï ðåñéóóüôåñá ãßíåôáé."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Èá ìðïñÝóåôå íá êÜíåôå ëåðôïìåñÝóôåñç åðéëïãÞ óôï åðüìåíï âÞìá."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Ðïóïóôü ðáêÝôùí ðñïò åãêáôÜóôáóç"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "ÅðéëïãÞ ïìÜäùí ðáêÝôùí"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "ÅðéëïãÞ îå÷ùñéóôþí ðáêÝôùí"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Óõíïëéêü ìÝãåèïò: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "ËÜèïò ðáêÝôï"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "¼íïìá: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Óçìáóßá: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Äåí ìðïñåßôå íá åðéëÝîåôå áõôü ôï ðáêÝôï äéüôé äåí õðÜñ÷åé áñêåôüò ÷þñïò"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Èá åãêáôáóôáèïýí ôá ðáñáêÜôù ðáêÝôá"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Èá áöáéñåèïýí ôá ðáñáêÜôù ðáêÝôá "
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Äåí ìðïñåßôå íá åðéëÝîåôå/áðïåðéëÝîåôå áõôü ôï ðáêÝôï"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Áõôü åßíáé áðáéôïýìåíï ðáêÝôï, äåí ìðïñåß íá áðïåðéëåãåß"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Äåí ìðïñåßôå íá áðïåðéëÝîåôå áõôü ôï ðáêÝôï. Åßíáé Þäç åãêáôåóôçìÝíï"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Áõôü ôï ðáêÝôï ðñÝðåé íá áíáâáèìéóôåß\n"
-"Åßóôå óßãïõñïò üôé èÝëåôå íá ôï áðïåðéëÝîåôå;"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Äåí ìðïñåßôå íá áðïåðéëÝîåôå áõôü ôï ðáêÝôï. ÐñÝðåé íá áíáâáèìéóôåß"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Áõôüìáôç ðñïâïëÞ åðéëåãìÝíùí ðáêÝôùí"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Öüñôùóç/ÁðïèÞêåõóç óå äéóêÝôôá"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "ÁíáíÝùóç åðéëåãìÝíùí ðáêÝôùí"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "ÅëÜ÷éóôç ÅãêáôÜóôáóç"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Åêôßìçóç"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Ðáñáêáëþ ðåñéìÝíåôå, ðñïåôïéìáóßá åãêáôÜóôáóçò"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d ðáêÝôá"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Ðñïåéäïðïßçóç\n"
-"\n"
-"Ðáñáêáëþ äéáâÜóôå ðñïóå÷ôéêÜ ôïõò üñïõò ðáñáêÜôù. Åáí äéáöùíåßôå ìå \n"
-"ïðïéïäÞðïôå êïììÜôé, äåí óáò åðéôñÝðåôáé íá åãêáôáóôÞóåôå ôï åðüìåíï ìÝóï "
-"CD. ÐáôÞóôå \n"
-"'Äéáöùíþ' ãéá íá óõíå÷ßóåôå ôçí åãêáôÜóôáóç ÷ùñßò áõôÜ ôá ìÝóá.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Áðïäï÷Þ"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "¶ñíçóç"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"ÁëëáãÞ Cd-Rom!\n"
-"\n"
-"Ðáñáêáëþ åéóÜãåôå ôï Cd-Rom ìå üíïìá \"%s\" óôïí ïäçãü óáò êáé ðáôÞóôå Ïê.\n"
-"ÅÜí äåí ôï Ý÷åôå, ðáôÞóôå Áêýñùóç ãéá áðïöõãÞ åãêáôÜóôáóçò áðü áõôü ôï CdRom."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "ÐñïêëÞèçêå óöÜëìá êáôÜ ôçí åãêáôÜóôáóç ôùí ðáêÝôùí:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "ÐñïêëÞèçêå óöÜëìá"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "¶äåéá ÷ñÞóçò"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"ÅéóáãùãÞ\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Ðëçêôñïëüãéï"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Ðáñáêáëþ åðéëÝîôå äéáñýèìéóç ðëçêôñïëïãßïõ."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "ÁõôÞ åßíáé ç ðëÞñçò ëßóôá ôùí äéáèÝóéìùí ðëçêôñïëïãßùí"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Ôé ôýðï åãêáôÜóôáóçò ðñïôéìÜôå;"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "ÅãêáôÜóôáóç/ÁíáâÜèìéóç"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Ðñüêåéôáé ãéá åãêáôÜóôáóç Þ ãéá áíáâÜèìéóç;"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Óõíéóôþìåíï"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Ãéá åéäéêïýò"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "ÁíáâÜèìéóç"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Ðáñáêáëþ åðéëÝîôå ôýðï ðïíôéêéïý."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Èýñá ðïíôéêéïý"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-"Ðáñáêáëþ åðéëÝîôå óåéñéáêÞ èýñá óôçí ïðïßá åßíáé óõíäåäåìÝíï ôï ðïíôßêé óáò."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Ðñïóïìïßùóç Êïõìðéþí"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Ðñïóïìïßùóç 2 Êïõìðéþí"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Ðñïóïìïßùóç 3 Êïõìðéþí"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Ñýèìéóç êáñôþí PCMCIA "
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Ñýèìéóç IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "äåí õðÜñ÷ïõí äéáèÝóéìåò êáôáôìÞóåéò"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "ÁíÜëõóç êáôáôìÞóåùí ãéá ðñïóäéïñéóìü óçìåßùí óýíäåóçò."
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "ÅðéëÝîôå óçìåßá óýíäåóçò"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Äåí ìðïñþ íá äéáâÜóù ôïí ðßíáêá êáôáôìÞóåùí, åßíáé ðïëý êáôåóôñáìÝíïò :(\n"
-"Èá ðñïóðáèÞóù íá óõíå÷ßóù áöáéñþíôáò ôéò ëáíèáóìÝíåò êáôáôìÞóåéò êáé ÏËÁ\n"
-"ôá äåäïìÝíá èá ÷áèïýí. Ç Üëëç åðéëïãÞ óáò åßíáé íá ìçí åðéôñÝøåôå óôï \n"
-"DrakX íá áããßîåé ôïí ðßíáêá êáôáôìÞóåùí. Ôï óöÜëìá åßíáé: %s\n"
-"\n"
-"Óõìöùíåßôå íá äéáãñáöïýí üëåò ïé êáôáôìÞóåéò;\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Ôï DiskDrake áðÝôõ÷å íá äéáâÜóåé óùóôÜ ôïí ðßíáêá êáôáôìÞóåùí.\n"
-"Óõíå÷ßóôå ìå äéêÞ óáò åõèýíç!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Äåí õðÜñ÷åé åëåýèåñïò ÷þñïò ãéá 1MB bootstrap! Ç åãêáôÜóôáóç èá óõíå÷éóôåß, "
-"áëëÜ ãéá íá îåêéíÞóåôå ôï óýóôçìÜ óáò, èá ÷ñåéáóôåß íá äçìéïõñãÞóåôå ìéá "
-"êáôÜôìçóç bootstrap ìå ôï DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "Äåí âñÝèçêå êáôÜôìçóç root ãéá ôçí ðñáãìáôïðïßçóç ôçò áíáâÜèìéóçò"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Root Partition (âáóéêÞ êáôÜôìçóç óõóôÞìáôïò)"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "ÐïéÜ åßíáé ç âáóéêÞ êáôÜôìçóç (/) ôïõ óõóôÞìáôüò óáò;"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Áðáéôåßôáé åðáíåêêßíçóç ãéá íá åíåñãïðïéçèïýí ïé áëëáãÝò óôïí ðßíáêá "
-"êáôáôìÞóåùí"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "ÅðéëÝîôå êáôáôìÞóåéò ðñïò ìïñöïðïßçóç"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "¸ëåã÷ïò ãéá ÷áëáóìÝíá blocks;"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Ìïñöïðïßçóç êáôáôìÞóåùí"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Äçìéïõñãßá êáé ìïñöïðïßçóç áñ÷åßïõ %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Äåí õðÜñ÷åé áñêåôü swap ãéá ôçí ïëïêëÞñùóç ôçò åãêáôÜóôáóçò, ðáñáêáëþ "
-"ðñïóèÝóôå"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "ØÜ÷íù ãéá äéáèÝóéìá ðáêÝôá"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Ðñïóäéïñéóìüò ðáêÝôùí ðñïò áíáâÜèìéóç"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Ôï óýóôçìÜ óáò äåí Ý÷åé áñêåôü äéáèÝóéìï ÷þñï ãéá åãêáôÜóôáóç Þ áíáâÜèìéóç (%"
-"d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "ÐëÞñçò (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "ÅëÜ÷éóôç (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Óõíéóôþìåíç (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "ÐñïóáñìïóìÝíï"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Ðáñáêáëþ åðéëÝîôå ôç öüñôùóç Þ áðïèÞêåõóç ôùí åðéëïãÞò ðáêÝôùí óôç "
-"äéóêÝôôá.\n"
-"Ç ìïñöïðïßçóç åßíáé ç ßäéá ìå ôéò äéóêÝôôåò áõôüìáôçò åãêáôÜóôáóçò."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Öüñôùóç áðü äéóêÝôôá"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Öüñôùóç áðü äéóêÝôôá"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "ÅðéëïãÞ ðáêÝôùí"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "ÅéóÜãåôå äéóêÝôôá ðïõ ðåñéÝ÷åé ôçí åðéëïãÞ ðáêÝôùí"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "ÁðïèÞêåõóç óå äéóêÝôôá"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Ôï åðéëåãìÝíï ìÝãåèïò åßíáé ìåãáëýôåñï áðü ôï äéáèÝóéìï ÷þñï"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"ÅÜí Ý÷åôå üëá ôá ðáñáêÜôù CDs, ðáôÞóôå Ok.\n"
-"ÅÜí äåí Ý÷åôå êáíÝíá áðü ôá ðáñáêÜôù CDs, ðáôÞóôå Áêýñùóç.\n"
-"ÅÜí äåí Ý÷åôå êÜðïéá áðü áõôÜ, áðïåðéëÝîôå ôá êáé ðáôÞóôå Ok."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ïíüìáôé \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"ÅãêáôÜóôáóç ðáêÝôïõ %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Ñõèìßóåéò ìåôÜ ôçí åãêáôÜóôáóç"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Ðáñáêáëþ åéóÜãåôå ôç äéóêÝôôá Åêêßíçóçò óôïí ïäçãü %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Ðáñáêáëþ åéóÜãåôå ôç äéóêÝôôá ÁíáíÝùóçò ÁñèñùìÜôùí óôïí ïäçãü %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Ìðïñåßôå ôþñá íá êáôåâÜóåôå êñõðôïãñáöéêü ëïãéóìéêü.\n"
-"\n"
-"ÐÑÏÓÏ×Ç:\n"
-"\n"
-"Ëüãù ôùí äéáöïñåôéêþí íüìùí ðïõ éó÷ýïõí óå äéÜöïñá ìÝñç ó÷åôéêÜ ìå ôçí "
-"êñõðôïãñáößá,\n"
-"ï ÷ñÞóôçò ðñÝðåé íá âåâáéùèåß üôé ïé íüìïé ðïõ ôïí áöïñïýí ôïõ åðéôñÝðïõí íá "
-"êáôåâÜóåé,\n"
-"áðïèçêåýóåé êáé/ç ÷ñçóéìïðïéÞóåé áõôü ôï ëïãéóìéêü.\n"
-"\n"
-"Ï ÷ñÞóôçò ðñÝðåé íá ðñïóÝîåé íá ìçí ðáñáâåß ôïõò ó÷åôéêïýò íüìïõò. Ôõ÷üí "
-"ðáñáâßáóç áõôþí\n"
-"ôùí íüìùí, ìðïñåß íá åðéöÝñåé êõñþóåéò.\n"
-"\n"
-"Óå êáìßá ðåñßðôùóç ç Mandrakesoft, ïé êáôáóêåõáóôÝò êáé ïé ðñïìçèåõôÝò ôçò "
-"äåí öÝñïõí åõèýíç\n"
-"ãéá ïðïéåóäÞðïôå æçìéÝò (ðïõ ðåñéëáìâÜíïõí ìåôáîý Üëëùí áðþëåéá êåñäþí, "
-"äéáôÜñáîç ëåéôïõñãßáò\n"
-"åðé÷åßñçóçò, áðþëåéá ðëçñïöïñéþí êáé ôõ÷üí êüóôç ðïõ èá ðñïêýøïõí áðü "
-"íïìéêÝò åõèýíåò.\n"
-"\n"
-"Ãéá ðåñéóóüôåñåò ðëçñïöïñßåò åðéêïéíùíÞóôå \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "ÅðéëÝîôå ôüðï áðü ôïí ïðïßï èá ãßíåé ç ëÞøç ðáêÝôùí"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Óýíäåóç ãéá ëÞøç ðáêÝôùí"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Ðáñáêáëþ åðéëÝîôå ôá ðáêÝôá ðïõ èÝëåôå íá åãêáôáóôÞóåôå"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "ÐïéÜ åßíáé ç æþíç þñáò;"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "Ôï ñïëüé ôïõ õðïëïãéóôÞ óáò åßíáé ñõèìéóìÝíï óå GMT (þñá ÃêñÞíïõúôò)"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Áõôüìáôïò óõã÷ñïíéóìüò þñáò (÷ñÞóç NTP)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "ÅîõðçñåôçôÞò NTP"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "ÁðïìåìáêñõóìÝíïò åîõðçñåôçôÞò CUPS"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "ÊáíÝíáò åêôõðùôÞò"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Ðåñßëçøç"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Ðïíôßêé"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "ÙñïëïãéáêÞ Æþíç"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "ÅêôõðùôÞò"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "KÜñôá ISDN"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "ÊÜñôá Þ÷ïõ"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "ÊÜñôá TV"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "ÔïðéêÜ áñ÷åßá"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Óõíèçìáôéêü root"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "×ùñßò óõíèçìáôéêü"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Áõôü ôï óõíèçìáôéêü åßíáé ðïëý áðëü (ðñÝðåé íá åßíáé ôïõëÜ÷éóôïí %d "
-"÷áñáêôÞñåò ìáêñý)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Ðéóôïðïßçóç ôáõôüôçôáò"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "Ðéóôïðïßçóç LDAP"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "ÅîõðçñåôçôÞò LDAP"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "Åîáêñßâùóç NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "Ðåñéï÷Þ (domain) NIS"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "ÅîõðçñåôçôÞò NIS"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Ìéá ðñïóáñìïóìÝíç äéóêÝôôá åêêßíçóçò óáò äßíåé ôçí äõíáôüôçôá íá åêêéíÞóåôå\n"
-"ôï óýóôçìÜ óáò ÷ùñßò ôçí ÷ñÞóç ôïõ ðñïãñÜììáôïò åêêßíçóçò. Áõôü åßíáé "
-"÷ñÞóéìï åÜí äåí èÝëåôå\n"
-"íá åãêáôáóôÞóåôå ôï SILO , åÜí êÜðïéï Üëëï ëåéôïõñãéêü êáôáóôñÝøåé ôï SILO\n"
-"Þ åÜí ïé ñõèìßóåéò óáò äåí åðéôñÝðïõí ôç ÷ñÞóç SILO. ÁõôÞ ç äéóêÝôôá ìðïñåß\n"
-"åðßóçò íá ÷ñçóéìïðïéçèåß óå óõíäõáóìü ìå ôçí äéóêÝôôá äéÜóùóçò ôïõ "
-"Mandrake,\n"
-"êÜíïíôáò åõêïëüôåñç ôçí åðáíáöïñÜ ôïõ óõóôÞìáôïò ìåôÜ áðü óïâáñÞ âëÜâç.\n"
-"ÈÝëåôå íá äçìéïõñãÞóåôå äéóêÝôôá åêêßíçóçò;"
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Ðñþôïò ïäçãüò äéóêÝôáò"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Äåýôåñïò ïäçãüò äéóêÝôáò"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "ÐáñÜëåéøç"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Ìéá ðñïóáñìïóìÝíç äéóêÝôôá åêêßíçóçò óáò äßíåé ôçí äõíáôüôçôá íá åêêéíÞóåôå\n"
-"ôï óýóôçìÜ óáò ÷ùñßò ôçí ÷ñÞóç ôïõ ðñïãñÜììáôïò åêêßíçóçò. Áõôü åßíáé "
-"÷ñÞóéìï åÜí äåí èÝëåôå\n"
-"íá åãêáôáóôÞóåôå ôï LILO (Þ ôï grub), åÜí êÜðïéï Üëëï ëåéôïõñãéêü "
-"êáôáóôñÝøåé ôï LILO\n"
-"Þ åÜí ïé ñõèìßóåéò óáò äåí åðéôñÝðïõí ôç ÷ñÞóç LILO. ÁõôÞ ç äéóêÝôôá ìðïñåß\n"
-"åðßóçò íá ÷ñçóéìïðïéçèåß óå óõíäõáóìü ìå ôçí äéóêÝôôá äéÜóùóçò ôïõ "
-"Mandrake,\n"
-"êÜíïíôáò åõêïëüôåñç ôçí åðáíáöïñÜ ôïõ óõóôÞìáôïò ìåôÜ áðü óïâáñÞ âëÜâç.\n"
-"ÈÝëåôå íá äçìéïõñãÞóåôå äéóêÝôôá åêêßíçóçò;"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "ËõðÜìáé, äåí õðÜñ÷åé äéáèÝóéìïò ïäçãüò äéóêÝôôáò"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "ÅðéëÝîôå ïäçãü äéóêÝôôáò ãéá äçìéïõñãßá äéóêÝôôáò åêêßíçóçò"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "ÅéóÜãåôå äéóêÝôôá óôïí ïäçãü %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Äçìéïõñãßá äßóêïõ åêêßíçóçò"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Ðñïåôïéìáóßá ðñïãñÜììáôïò åêêßíçóçò"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Öáßíåôáé ðùò Ý÷åôå Ýíá Áñ÷áßï Þ ¶ãíùóôï\n"
-" ìç÷Üíçìá, ï yaboot bootloader äåí èá äïõëÝøåé ãéá óáò.\n"
-"Ç åãêáôÜóôáóç èá óõíå÷éóôåß, áëëÜ\n"
-"èá ÷ñåéáóôåß íá ÷ñçóéìïðïéÞóåôå ôï BootX ãéá íá îåêéíÞóåôå ôï ìç÷ÜíçìÜ óáò"
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "ÈÝëåôå íá ÷ñçóéìïðïéÞóåôå ôï aboot;"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"ÓöÜëìá êáôÜ ôçí åãêáôÜóôáóç ôïõ aboot, \n"
-"ðñïóðÜèåéá âåâéáóìÝíçò åãêáôÜóôáóçò, áêüìá êáé áí áõôü Ý÷åé óáí áðïôÝëåóìá "
-"ôçí êáôáóôñïöÞ ôçò ðñþôçò êáôÜôìçóçò;"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Åãê. ðñ. åêêßíçóçò"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Ç åãêáôÜóôáóç ôïõ ðñïãñÜììáôïò åêêßíçóçò áðÝôõ÷å. ÐñïêëÞèçêå ôï áêüëïõèï "
-"óöÜëìá:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Ìðïñåß íá ÷ñåéáóôåß íá áëëÜîåôå ôçí Open Firmware boot-óõóêåõÞ þóôå íá\n"
-" åíåñãïðïéÞóåôå ôïí bootloader.  Áí óôï reboot äåí äåßôå ôçí ðñïôñïðÞ ôïõ\n"
-" bootloader, ðáôÞóôå ôï Command-Option-O-F êáôÜ ôï reboot êáé åéóÜãåôå:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Ôüôå ôõðþóôå: shut-down\n"
-"Óôçí åðüìåíç åêêßíçóç èá ðñÝðåé íá äåßôå ôçí ðñïôñïðÞ ôïõ bootloader."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "×áìçëü"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "ÌÝôñéï"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Õøçëü"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "ÅðéëÝîôå åðßðåäï áóöáëåßáò"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "ÅéóÜãåôå Üäåéá äéóêÝôôá óôïí ïäçãü %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Ðñïåôïéìáóßá äéóêÝôáò áõôüìáôçò åãêáôÜóôáóçò"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"ÌåñéêÜ âÞìáôá äåí ïëïêëçñþèçêáí.\n"
-"\n"
-"ÈÝëåôå óßãïõñá íá åãêáôáëåßøåôå ôþñá;"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Óõã÷áñçôÞñéá, ç åãêáôÜóôáóç ïëïêëçñþèçêå.\n"
-"ÁöáéñÝóôå ôçí äéóêÝôôá Þ ôï CD åêêßíçóçò êáé ðáôÞóôå return ãéá "
-"åðáíåêêßíçóç.\n"
-"\n"
-"Ãéá ðëçñïöïñßåò ó÷åôéêÜ ìå äéïñèþóåéò áõôÞò ôçò Ýêäïóçò ôïõ Mandrake Linux,\n"
-"óõìâïõëåõôåßôå ôçí óåëßäá http://www.mandrakelinux.com/.\n"
-"\n"
-"Ðëçñïöïñßåò ó÷åôéêÜ ìå ôéò ñõèìßóåéò ôïõ óõóôÞìáôüò óáò õðÜñ÷ïõí óôï "
-"ó÷åôéêü\n"
-"êåöÜëáéï ôïõ åðßóçìïõ ïäçãïý ÷ñÞóçò ôïõ Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Ðñïåôïéìáóßá äéóêÝôôáò áõôüìáôçò åãêáôÜóôáóçò"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Ç áõôüìáôç åãêáôÜóôáóç ìðïñåß íá åßíáé ðëÞñùò áõôüìáôç,\n"
-"óå áõôÞí ôçí ðåñßðôùóç èá áíáëÜâåé ôï óêëçñü äßóêï!!\n"
-"(áõôü áíáöÝñåôáé ãéá ðåñéðôþóåéò åãêáôÜóôáóçò óå Üëëï õðïëïãéóôÞ).\n"
-"\n"
-"Ìðïñåß íá ðñïôéìÜôå íá åðáíáëÜâåôå ôçí åãêáôÜóôáóç.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Áõôüìáôï"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Åðáíáöüñôùóç"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "ÁðïèÞêåõóç åðéëïãÞò ðáêÝôùí"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "ÅãêáôÜóôáóç Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> ÁëëáãÞ ðåäßïõ     | <Space> åðéëïãÞ | <F12> åðüìåíç ïè. "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "ôï kdesu ëåßðåé"
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "ÅðéëÝîôå ðñÜîç"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr " Ãéá Ðñï÷ùñçìÝíïõò"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Ðáñáêáëþ ðåñéìÝíåôå"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "ÁíÜðôõîç äÝíôñïõ"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Óýìðôõîç äÝíôñïõ"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "ÅíáëëáãÞ ìåôáîý åðßðåäçò êáé ïìáäéêÞò ôáîéíüìçóçò"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Áìöéâïëï (%s), ðáñáêáëþ ðñïóäéïñéóôå êáëýôåñá\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "ÊáêÞ åðéëïãÞ, îáíáäïêéìÜóôå\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ; (åî' ïñéóìïý %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ç åðéëïãÞ óáò; (åî' ïñéóìïý %s)"
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Ç åðéëïãÞ óáò; (åî' ïñéóìïý %s åéóÜãåôå `none' ãéá êáíÝíá) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "ÔóÝ÷éêï (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Ãåñìáíéêü"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Éóðáíéêü"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Öéíëáíäéêü"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Ãáëëéêü"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Íïñâçãéêü"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Ðïëùíéêü"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Ñùóéêü"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Óïõçäéêü"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "ÌåãÜëç Âñåôáííßá (UK)"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "Ç.Ð.Á. (US)"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Áëâáíéêü"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Áñìåíéêü (ðáëéü)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Áñìåíéêü (ãñáöïìç÷áíÞ)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Áñìåíéêü (öùíçôéêü)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "ÁæåñìðáúôæÜí (Ëáôéíéêü)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Âåëãéêü"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Âïõëãáñéêü"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "ÂñáæéëéÜíéêï"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Ëåõêïñùóßáò"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Åëâåôéêü (ÃåñìáíéêÞ äéáñýèìéóç)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Åëâåôéêü (ÃáëëéêÞ äéáñýèìéóç)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "ÔóÝ÷éêï (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Ãåñìáíéêü (÷ùñßò íåêñÜ ðëÞêôñá)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Äáíéêü"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (ÇÐÁ)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Íïñâçãéêü)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Åóèïíéêü"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Ãåùñãßá (\"Ñùóéêç\" äéáñýèìéóç)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Ãåùñãßá (\"ËáôéíéêÞ\" äéáñýèìéóç)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Åëëçíéêü"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Ïõããñéêü"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Êñïáôéêü"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "ÉóñáÞë"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "ÉóñáÞë (öùíçôéêü)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Éñáíéêü"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Éóëáíäéêü"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Éôáëéêü"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Éáðùíéêü 106 ðëÞêôñùí"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "ÊïñåÜôéêï Ðëçêôñïëüãéï"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "ËáôéíéêÞò ÁìåñéêÞò"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Ëéèïõáíéêü AZERTY (ðáëéü)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Ëéèïõáíéêü AZERTY (íÝï)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Ëéèïõáíéêü \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Ëéèïõáíéêü \"öùíçôéêü\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "Ôïðïèåóßá"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "ÌáêåäïíéêÞ"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Ïëëáíäéêü"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Ðïëùíéêü (äéáñýèìéóç qwerty)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Ðïëùíéêü (äéáñýèìéóç qwertz)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Ðïñôïãáëëéêü"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Êáíáäéêü (ÊåìðÝê)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Ñïõìáíéêü (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Ñïõìáíéêü (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Ñùóéêü (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Óëïâåíßáò"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Óëïâáêßáò (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Óëïâáêßáò (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "ÁæåñìðáúôæÜí (êõñéëëéêü)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Thai"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Thai"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Ôïõñêéêü (ðáñáäïóéáêü \"F\" ìïíôÝëï)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Ôïõñêéêü (ìïíôÝñíï \"Q\" ìïíôÝëï)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ïõêñáíéêü"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "US äéåèíÝò"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "ÂéåôíÜì \"numeric row\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Ãéïõãêïóëáâéêü (ëáôéíéêü/êõñéëëéêü)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "ÊõêëéêÝò óõíäÝóåéò %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "ÁöáéñÝóôå ôá logical volumes ðñþôá\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Ôõðéêü"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Ãåíéêïý ôýðïõ ðïíôßêé PS2 ìå ñïäÜêé"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 ðëÞêôñïõ"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Ãåíéêü"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Ìå ñïäÜêé"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "óåéñéáêü"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Ãåíéêïý ôýðïõ ìå 2 ðëÞêôñá"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Ãåíéêïý ôýðïõ ìå 3 ðëÞêôñá"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (óåéñéáêü, ðáëéüò C7 ôýðïò)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "Äýï ðëÞêôñùí"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "Ôñéþí ðëÞêôñùí"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "êáíÝíá"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "×ùñßò ðïíôßêé"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Ðáñáêáëþ äïêéìÜóôå ôï ðïíôßêé"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Ãéá åíåñãïðïßçóç ðïíôéêéïý"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "ÊÉÍÇÓÔÅ ÔÏ ÑÏÄÁÊÉ!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "ÔÝëïò"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Åðüìåíï -»"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Ðñïçãïýìåíï"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Óùóôü;"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Óýíäåóç óôï Äéáäßêôõï"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Ï ðéï êïéíüò ôñüðïò óýíäåóçò adsl åßíáé pppoe.\n"
-"ÏñéóìÝíåò óõíäÝóåéò ÷ñçóéìïðïéïýí pptp, êÜðïéåò ëßãåò dhcp.\n"
-"ÅÜí äåí îÝñåôå, åðéëÝîôå '÷ñÞóç pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "÷ñÞóç dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "÷ñÞóç pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "÷ñÞóç pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Ðïéüí ðåëÜôç dhcp èÝëåôå íá ÷ñçóéìïðïéÞóåôå;\n"
-"Ç ðñïåðéëïãÞ åßíáé dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Äåí âñÝèçêå ðñïóáñìïãÝáò äéêôýïõ Ethernet óôï óýóôçìÜ óáò.\n"
-"Äåí ìðïñþ íá ñõèìßóù áõôïý ôïõ ôýðïõ ôçí óýíäåóç."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "ÅðéëÝîôå óõóêåõÞ äéêôýïõ"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Ðáñáêáëþ åðéëÝîôå ðïéÜ óõóêåõÞ äéêôýïõ èÝëåôå íá ÷ñçóéìïðïéÞóåôå ãéá ôçí "
-"óýíäåóç óôï Äéáäßêôõï"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "äåí âñÝèçêå ðñïóáñìïãÝáò äéêôýïõ"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Ñýèìéóç äéêôýïõ"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Ðáñáêáëþ åéóÜãåôå ôï üíïìá ôïõ óõóôÞìáôïò Ýáí ôï îÝñåôå.\n"
-"ÏñéóìÝíïé åîõðçñåôçôÝò DHCP äåí ëåéôïõñãïýí ÷ùñßò áõôü.\n"
-"Ôï üíïìá áõôü ðñÝðåé íá åßíáé Ýíá ðëÞñåò üíïìá óõóôÞìáôïò,\n"
-"üðùò ð.÷. ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "¼íïìá óõóôÞìáôïò"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Ïäçãüò Ñýèìéóçò Äéêôýïõ"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Åîùôåñéêü ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "ÅóùôåñéêÞ êÜñôá ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Ôß åßäïõò åßíáé ç ISDN óýíäåóÞ óáò;"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"ÐïéÜ ISDN ñýèìéóç ðñïôéìÜôå;\n"
-"\n"
-"* Ç ðáëéÜ ñýèìéóç ÷ñçóéìïðïéåß ôï isdn4net. ÐåñéÝ÷åé ÷ñÞóéìá åñãáëåßá,\n"
-"  áëëÜ åßíáé ëßãï äýóêïëï ãéá Ýíáí áñ÷Üñéï íá ñõèìéóôåß êáé ü÷é óôåñåüôõðï.\n"
-"\n"
-"* Ç ÍÝá ñýèìéóç åßíáé åõêïëüôåñç óôçí êáôáíüçóç, ðåñéóóüôåñï óôåñåüôõðç,\n"
-"  áëëÜ ìå ëéãüôåñá åñãáëåßá.\n"
-"\n"
-"Ðñïôåßíïõìå ôçí åëáöñéÜ ñýèìéóç.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "ÍÝá ñýìèéóç (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "ÐáëéÜ ñýìèéóç (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "Ñõèìßóåéò ISDN"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"ÅðéëÝîôå ôïí ðáñï÷Ýá óáò\n"
-" ÅÜí äåí åßíáé óôïí êáôÜëïãï, åðéëÝîôå Unlisted"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Ðñùôüêïëëï Åêêßíçóçò"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Åõñþðç (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Õðüëïéðïò êüóìïò"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Õðüëïéðïò êüóìïò \n"
-" ÷ùñßò D-Channel (ìéóèùìÝíåò ãñáììÝò)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Ðïéü ðñùôüêïëëï èÝëåôå íá ÷ñçóéìïðïéÞóåôå;"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Ôß êÜñôá Ý÷åôå;"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Äåí îÝñù"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"ÅÜí Ý÷åôå ISA êÜñôá, ïé ôéìÝò óôçí åðüìåíç ïèüíç èá ðñÝðåé íá åßíáé óùóôÝò.\n"
-"\n"
-"ÅÜí Ý÷åôå PCMCIA êÜñôá, ðñÝðåé íá îÝñåôå ôï irq êáé ôï io ôçò êÜñôáò óáò.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Áêýñùóç"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "ÓõíÝ÷åéá"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "ÐïéÜ åßíáé ç ISDN êÜñôá óáò;"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Åíôüðéóá ìéá ISDN êÜñôá, áëëÜ äåí îÝñù ôïí ôýðï ôçò. Ðáñáêáëþ åðéëÝîôå ìéá "
-"êÜñôá PCI áðü ôçí ðáñáêÜôù ïèüíç."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Äåí âñÝèçêå êÜñôá ISDN. Ðáñáêáëþ åðéëÝîôå ìéá áðü ôçí ðáñáêÜôù ïèüíç."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Óå ðïéÜ óåéñéáêÞ ðüñôá åßíáé óõíäåäåìÝíï ôï modem óáò;"
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "ÅðéëïãÝò dialup"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "¼íïìá óýíäåóçò"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Áñéèìüò ôçëåöþíïõ"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "×ñÞóç script"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "×ñÞóç ôåñìáôéêïý"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "¼íïìá äéêôýïõ"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Ðñþôïò åîõðçñåôçôÞò DNS (ðñïáéñåôéêü)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Äåýôåñïò åîõðçñåôçôÞò DNS (ðñïáéñåôéêü)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Ìðïñåßôå íá áðïóõíäåèåßôå Þ íá åðáíáñõèìßóåôå ôçí óýíäåóÞ óáò."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Ìðïñåßôå íá åðáíáñõèìßóåôå ôçí óýíäåóÞ óáò."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "ÁõôÞ ôç óôéãìÞ åßóôå óõíäåäåìÝíïé óôï Äéáäßêôõï."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Ìðïñåßôå íá óõíäåèåßôå óôï Äéáäßêôõï Þ íá åðáíáñõèìßóåôå ôçí óýíäåóÞ óáò."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "ÁõôÞ ôç óôéãìÞ äåí åßóôå óõíäåäåìÝíïé óôï Äéáäßêôõï."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Óýíäåóç óôï äéáäßêôõï (internet)"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Áðïóýíäåóç áðü ôï äéáäßêôõï (internet)"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Ñýèìéóç óýíäåóçò óôï äßêôõï (ôïðéêü Þ Äéáäßêôõï)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Óýíäåóç êáé ñýèìéóç Äéáäéêôýïõ (internet)"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ôþñá èá ñõèìßóïõìå ôçí %s óýíäåóç."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Ôþñá èá ñõèìßóïõìå ôçí %s óýíäåóç.\n"
-"\n"
-"\n"
-"ÐáôÞóôå ôï OK ãéá íá îåêéíÞóåôå"
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Ñõèìßóåéò äéêôýïõ"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"ÅðåéäÞ êÜíåôå ìéá äéêôõáêÞ åãêáôÜóôáóç, ôï äßêôõï åßíáé Þäç ñõèìéóìÝíï.\n"
-"ÊÜíôå êëßê óôï Ïê ãéá íá äéáôçñÞóåôå ôéò ñõèìßóåéò óáò, Þ Üêõñï ãéá íá "
-"îáíáñõèìßóåôå ôç óýíäåóç óôï Internet.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Êáëþò Þëèáôå óôïí Ïäçãü Ñýèìéóçò ôïõ Äéêôýïõ\n"
-"\n"
-"Åßìáóôå Ýôïéìïé íá ñõèìßóïõìå ôç óýíäåóÞ óáò óôï internet/äßêôõï.\n"
-"Áí äåí èÝëåôå íá ÷ñçóéìïðïéÞóåôå ôçí áõôüìáôç áíß÷íåõóç, îåôóåêÜñåôå ôï "
-"checkbox.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "ÅðéëÝîôå ôï ðñïößë ãéá ñýèìéóç"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "×ñÞóç áõôüìáôçò áíß÷íåõóçò"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Åíôïðéóìüò óõóêåõþí..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "ÁðëÞ óýíäåóç ìå modem"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "áíé÷íåýèçêå óôçí ðüñôá %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "Óýíäåóç ISDN"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "áíé÷íåýèçêå ôï %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "Óýíäåóç ADSL"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "áíé÷íåýôçêå óôçí äéåðéöÜíåéá %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "ÊáëùäéáêÞ óýíäåóç"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "áíé÷íåýèçêå êáëùäéáêÞ óýíäåóç"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "Óýíäåóç LAN"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "êÜñôá(åò) ethernet áíé÷íåýèçêáí"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "ÅðéëÝîôå ôç óýíäåóç ðïõ èÝëåôå íá ñõèìßóåôå"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"¸÷åôå ñõèìßóåé ðïëëïýò ôñüðïõò ãéá íá óõíäÝåóôå óôï Internet.\n"
-"ÅðéëÝîôå áõôüí ðïõ èÝëåôå íá ÷ñçóéìïðïéÞóåôå.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Óýíäåóç Internet"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "ÈÝëåôå íá óõíäÝåóôå êáôÜ ôçí åêêßíçóç;"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Ñõèìßóåéò äéêôýïõ"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"¸íá ðñüâëçìá åìöáíßóôçêå êáôÜ ôçí åðáíåêêßíçóç ôïõ äéêôýïõ: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Óõã÷áñçôÞñéá, ç ñýèìéóç äéêôýïõ êáé internet ôåëåßùóå.\n"
-"\n"
-"Ïé ñõèìßóåéò èá åöáñìïóôïýí ôþñá óôï óýóôçìÜ óáò.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Áöïý ãßíåé áõôü, ðñïôåßíïõìå íá îáíáîåêéíÞóåôå ôï ×\n"
-"ðåñéâÜëëïí ãéá íá áðïöýãåôå ôá ðñïâëÞìáôá áëëáãÞò hostname."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ÐÑÏÓÏ×Ç: ÁõôÞ ç óõóêåõÞ åßíáé Þäç ñõèìéóìÝíç ãéá íá óõíäÝåôáé ìå ôï  "
-"Äéáäßêôõï.\n"
-"ÁðëÜ ðáôÞóôå OK ãéá íá êñáôÞóåôå ôéò õðÜñ÷ïõóåò ñõèìßóåéò.\n"
-"ÁëëÜæïíôáò ôá ðáñáêÜôù ðåäßá èá áëëÜîåôå ôçí õðÜñ÷ïõóá ñýèìéóç."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Ðáñáêáëþ åéóÜãåôå ôéò IP ñõèìßóåéò ãéá áõôü ôï óýóôçìá.\n"
-"ÊÜèå óôïé÷åßï ðñÝðåé íá åéóá÷èåß ùò IP äéåýèõíóç óå ïêôáäéêÞ\n"
-"ìïñöÞ (ðáñÜäåéãìá: 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Ñýèìéóç óõóêåõÞò äéêôýïõ %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "Äéåýèõíóç IP"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "ÌÜóêá äéêôýïõ"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Áõôüìáôï IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Ç IP äéåýèõíóç ðñÝðåé íá åßíáé óå ìïñöÞ 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Ðáñáêáëþ åéóÜãåôå ôï üíïìá ôïõ óõóôÞìáôïò.\n"
-"Ôï üíïìá áõôü ðñÝðåé íá åßíáé Ýíá ðëÞñåò üíïìá óõóôÞìáôïò,\n"
-"üðùò ð.÷. ``mybox.mylab.myco.com''.\n"
-"Ìðïñåßôå åðßóçò íá åéóÜãåôå êáé ôçí äéåýèõíóç IP ôçò ðýëçò äéêôýïõ"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "ÅîõðçñåôçôÞò DNS"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Ðýëç äéêôýïõ"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "ÓõóêåõÞ ðýëçò"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Ñõèìßóåéò proxies"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Ï proxy ðñÝðåé íá åßíáé http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Ï proxy ðñÝðåé íá åßíáé ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Ñõèìßóåéò Äéáäéêôýïõ (Internet)"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "ÈÝëåôå íá äïêéìÜóåôå íá óõíäåèåßôå óôï Äéáäßêôõï ôþñá;"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "ÄïêéìÞ óýíäåóçò... "
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Ôï óýóôçìá äåí åßíáé óõíäåäåìÝíï óôï Äéáäßêôõï."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Ãéá ëüãï ÁóöÜëåéáò, èá áðïóõíäåèåßôå ôþñá."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Ôï óýóôçìÜ óáò äåí öáßíåôáé íá åßíáé óõíäåäåìÝíï óôï Äéáäßêôõï.\n"
-"ÄïêéìÜóôå íá åðáíáñõèìßóåôå ôçí óýíäåóÞ óáò."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Ñõèìßóåéò óëõíäåóçò"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Ðáñáêáëþ åëÝãîôå Þ óõìðëçñþóôå ôï ðáñáêÜôù ðåäßï"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ êÜñôáò"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "DMA êÜñôáò"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "IO êÜñôáò"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "IO_0 êÜñôáò"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "IO_1 êÜñôáò"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Ðñïóùðéêüò áñéèìüò ôçëåöþíïõ"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "¼íïìá ðáñï÷Ýá (ð.÷. provider.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Áñéèìüò ôçëåöþíïõ ðáñï÷Ýá"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "Provider dns 1 (ðñïáéñåôéêü)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "Provider dns 2 (ðñïáéñåôéêü)"
-
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "ÅðéëÝîôå ðëçêôñïëüãéï"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Ôñüðïò êëÞóçò"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Ôá÷ýôçôá óýíäåóçò"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "×ñüíïò óýíäåóçò: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "'Ïíïìá ëïãáñéáìïý (user name)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Óõíèçìáôéêü ëïãáñéáóìïý"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Ç åêôåôáìÝíç êáôÜôìçóç äåí õðïóôçñßæåôáé óå áõôüí ôïí ôýðï óõóôÞìáôïò"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"ÕðÜñ÷åé Ýíá êåíü óôïí ðßíáêá êáôáôìÞóåùí ìá äåí ìðïñþ íá ôï ÷ñçóéìïðïéÞóù.\n"
-"Ç ìïíáäéêÞ ëýóç åßíáé íá ìåôáêéíÞóåôå ôéò ðñùôåýïõóåò êáôáôìÞóåéò óáò Ýôóé "
-"þóôå ôï êåíü íá âñåèåß äßðëá óôçí åêôåôáìÝíç êáôÜôìçóç"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Ç åðáíáöïñÜ áðü ôï áñ÷åßï %s áðÝôõ÷å: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "ÊáôåóôñáìÝíï åöåäñéêü áñ÷åßï"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "ÓöÜëìá åããñáöÞò óôï áñ÷åßï %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"ÊÜôé êáêü óõìâáßíåé óôï äßóêï óáò. \n"
-"¸íá ôÝóô åëÝã÷ïõ ôçò áêåñáéüôçôáò ôùí äåäïìÝíùí áðÝôõ÷å. \n"
-"Áõôü óçìáßíåé ðùò ç ïðïéáäÞðïôå åããñáöÞ óôï äßóêï èá êáôáëÞîåé óáí ôõ÷áßá "
-"óêïõðßäéá"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ðñÝðåé íá õðÜñ÷åé"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "óçìáíôéêü"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "ðïëý êáëü"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "êáëü"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ßóùò"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Ôïðéêüò åêôõðùôÞò"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "ÁðïìåìáêñõóìÝíïò åêôõðùôÞò"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "ÁðïìåìáêñõóìÝíïò åîõðçñåôçôÞò CUPS"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "ÁðïìåìáêñõóìÝíïò åîõðçñåôçôÞò lpd"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "ÅêôõðùôÞò äéêôýïõ (socket)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "ÅîõðçñåôçôÞò åêôõðþóåùí"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "ÓõóêåõÞ åêôõðùôÞ URI"
-
-#: ../../printer.pm_.c:48
-#, fuzzy
-msgid "Pipe job into a command"
-msgstr "ÄéáóùëÞíùóç óôçí åíôïëÞ"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(module %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Ôñüðïò óýíäåóçò åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Ðþò åßíáé óõíäåäåìÝíïò ï åêôõðùôÞò óáò;"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"Ìå ôçí ÷ñÞóç åîõðçñåôçôÞ CUPS, äåí ÷ñåéÜæåôáé íá ñõèìßóåôå åêôõðùôÝò \n"
-"åäþ. Ïé åêôõðùôÝò èá áíáãíùñéóôïýí áõôüìáôá, åêôüò áí Ý÷åôå åîõðçñåôçôÞ\n"
-"óå äéáöïñåôéêü äßêôõï. Óå áõôÞí ôçí ðåñßðôùóç, èá ðñÝðåé íá äçëþóåôå ôçí\n"
-"IP äéåýèõíóç ôïõ åîõðçñåôçôÞ CUPS êáé ßóùò êáé ôïí áñéèìü èýñáò."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-#, fuzzy
-msgid "None"
-msgstr "Ïëïêëçñþèçêå"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "ÅðéëÝîôå ôïí åî' ïñéóìïý ÷ñÞóôç:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Êëåßóéìï"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "ÁðïìåìáêñõóìÝíïò åêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Ç IP äéåýèõíóç ðñÝðåé íá åßíáé óå ìïñöÞ 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "Ï áñéèìüò èýñáò ðñÝðåé íá åßíáé áêÝñáéïò áñéèìüò!"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "Ôïðéêüò åêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "IP äéåýèõíóç åîõðçñåôçôÞ CUPS:"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Èýñá"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Boot Ôýðïõ Ñýèìéóç"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Åíôïðéóìüò óõóêåõþí..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "ÄïêéìÞ èõñþí"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "¸íáò åêôõðùôÞò ôýðïõ \"%s\" åíôïðßóôçêå óôï "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "ÓõóêåõÞ ôïðéêïý åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Óå ðïéÜ óõóêåõÞ åßíáé óõíäåäåìÝíïò ï åêôõðùôÞò óáò;\n"
-"(óçìåßùóç: ôï /dev/lp0 áíôéóôïé÷åß óôï LPT1:)\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "ÓõóêåõÞ åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "Ôï áñ÷åßï óõóêåõÞò ëåßðåé!"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "ÁíÜãíùóç âÜóçò ïäçãþí CUPS"
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "ÅðéëïãÝò áðïìåìáêñõóìÝíïõ lpd åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Ãéá íá ÷ñçóéìïðïéÞóåôå ìéá áðïìåìáêñõóìÝíç ïõñÜ åêôýðùóçò\n"
-"lpd, ðñÝðåé íá äþóåôå ôï äéêôõáêü üíïìá ôïõ åîõðçñåôçôÞ \n"
-"åêôõðþóåùí, êáèþò êáé ôï üíïìá ôçò ïõñÜò ôçí ïðïßá èá \n"
-"÷ñçóéìïðïéÞóåôå óå áõôüí ôïí åîõðçñåôçôÞ."
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "ÁðïìåìáêñõóìÝíï äéêôõáêü üíïìá:"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "ÁðïìåìáêñõóìÝíïò åêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "ÁðïìåìáêñõóìÝíï äéêôõáêü üíïìá ëåßðåé!"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "ÁðïìåìáêñõóìÝíï äéêôõáêü üíïìá ëåßðåé!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "ÅðéëïãÝò åêôõðùôÞ SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Ãéá íá åêôõðþóåôå óå Ýíáí SMB åêôõðùôÞ, ðñÝðåé íá äþóåôå ôï \n"
-"SMB äéêôõáêü üíïìá (Óçìåßùóç! Ìðïñåß íá åßíáé äéáöïñåôéêü áðü \n"
-"ôï äéêôõáêü üíïìá TCP/IP!) êáé ßóùò êáé ôçí äéåýèõíóç IP ôïõ \n"
-"åîõðçñåôçôÞ åêôõðþóåùí, ôï üíïìá ôïõ åêôõðùôÞ óôïí ïðïßï åðéèõìåßôå \n"
-"ðñüóâáóç, êáèþò êáé ïðïéáäÞðïôå áðáñáßôçôç ðëçñïöïñßá ðåñß êùäéêïý \n"
-"÷ñÞóôç, ëÝîçò êëåéäß êáé ôïìÝá Þ ïìÜäáò åñãáóßáò."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "Äéêôõáêü üíïìá SMB åîõðçñåôçôÞ:"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "IP äéåýèõíóç SMB åîõðçñåôçôÞ:"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "¼íïìá ðüñïõ:"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "ÏìÜäá åñãáóßáò:"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Åßôå ôï üíïìá ôïõ åîõðçñåôçôÞ Þ ç IP ôïõ ðñÝðåé íá äïèïýí!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "Ôï üíïìá ãéá ôçí Samba ëåßðåé!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "ÅðéëïãÝò åêôõðùôÞ NetWare"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Ãéá íá åêôõðþóåôå óå Ýíáí åêôõðùôÞ NetWare, ðñÝðåé íá äþóåôå\n"
-"ôï üíïìá ôïõ åîõðçñåôçôÞ åêôõðþóåùí NetWare (Óçìåßùóç! Ìðïñåß\n"
-"íá åßíáé äéáöïñåôéêü áðü ôï äéêôõáêü üíïìá TCP/IP!), \n"
-"ôï üíïìá ôïõ åêôõðùôÞ óôïí ïðïßï åðéèõìåßôå ðñüóâáóç, êáèþò êáé\n"
-"ïðïéáäÞðïôå áðáñáßôçôç ðëçñïöïñßá ðåñß êùäéêïý ÷ñÞóôç êáé ëÝîçò êëåéäß."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "ÅîõðçñåôçôÞò åêôõðþóåùí"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "¼íïìá ïõñÜò åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "Ôï üíïìá ôïõ åîõðçñåôçôÞ NCP ëåßðåé!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "Ôï üíïìá ôçò NCP ïõñÜò ëåßðåé!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "ÅðéëïãÝò åêôõðùôÞ socket"
-
-#: ../../printerdrake.pm_.c:528
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Ãéá íá åêôõðþóåôå óå Ýíáí åêôõðùôÞ socket, ðñÝðåé íá äþóåôå ôï \n"
-"äéêôõáêü üíïìá ôïõ åêôõðùôÞ êáé ðñïáéñåôéêÜ ôïí áñéèìü èýñáò."
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "¼íïìá åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "¼íïìá åêôõðùôÞ ëåßðåé!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "ÓõóêåõÞ åêôõðùôÞ URI"
-
-#: ../../printerdrake.pm_.c:567
-#, fuzzy
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Ìðïñåßôå íá ïñßóåôå êáôåõèåßáí ôï URI ãéá ôçí ðñüóâáóç óôïí åêôõðùôÞ. Ôï URI "
-"ðñÝðåé íá ôçñåß åßôå ôéò CUPS åßôå ôéò Foomatic ðñïäéáãñáöÝò. ¼÷é ðùò äåí "
-"õðïóôçñßæïíôáé üëïé ïé URI ôýðïé áðü üëá ôá spoolers."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "¸íá óùóôü URI ðñÝðåé íá åéóá÷èåß!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"ÊÜèå åêôõðùçò ÷ñåéÜæåôáé Ýíá üíïìá (ð.÷. lp).\n"
-"Ôá ðåäßá ÐåñéãñáöÞ êáé Ôïðïèåóßá äåí ÷ñåéÜæåôáé íá \n"
-"óõìðëçñùèïýí. Åßíáé áðëÜ ó÷üëéá ãéá ôïõò ÷ñÞóôåò."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "¼íïìá åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "ÐåñéãñáöÞ"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Ôïðïèåóßá"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "ÁíÜãíùóç âÜóçò ïäçãþí CUPS"
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "ÅðéëïãÞ ìïíôÝëïõ åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "Ôß ôýðïõ åêôõðùôÞ Ý÷åôå;"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Ñõèìßóåéò Äéáäéêôýïõ (Internet)"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Ñõèìßóåéò Äéáäéêôýïõ (Internet)"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "ÅðéëïãÞ %s ðñÝðåé íá åßíáé áêÝñáéïò áñéèìüò!"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "ÅðéëïãÞ %s ðñÝðåé íá åßíáé áñéèìüò!"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "ÅðéëïãÞ %s åêôüò ïñßïõ!"
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "ÈÝëåôå íá åêôõðþóåôå ìéá äïêéìáóôéêÞ óåëßäá;"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "ÄïêéìÞ èõñþí"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "ÅêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "Ôõðéêü"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Åêôýðùóç äïêéìáóôéêþí óåëßäùí..."
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "Åêôýðùóç äïêéìáóôéêþí óåëßäùí..."
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Åêôýðùóç äïêéìáóôéêþí óåëßäùí..."
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Ìßá Þ ðåñéóóüôåñåò äïêéìáóôéêÝò óåëßäåò óôÜëèçêáí óôïí åêôõðùôÞ.\n"
-"Ìðïñåß íá ðåñÜóåé êÜðïéïò ÷ñüíïò ìÝ÷ñé ç åêôýðùóç íá îåêéíÞóåé.\n"
-"ÊáôÜóôáóç åêôýðùóçò:\n"
-"%s\n"
-"\n"
-"¸ãéíå óùóôÜ ç åêôýðùóç"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Ìßá Þ ðåñéóóüôåñåò äïêéìáóôéêÝò óåëßäåò óôÜëèçêáí óôïí åêôõðùôÞ.\n"
-"Ìðïñåß íá ðåñÜóåé êÜðïéïò ÷ñüíïò ìÝ÷ñé ç åêôýðùóç íá îåêéíÞóåé.\n"
-"¸ãéíå óùóôÜ ç åêôýðùóç;"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "ÊáíÝíáò åêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "ÄéáêïðÞ ëåéôïõñãßáò äéêôýïõ."
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "ÅðéëïãÝò åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Ñõèìßóåéò Äéáäéêôýïõ (Internet)"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Ôï üíïìá ôïõ åêôõðùôÞ ðñÝðåé íá ðåñéÝ÷åé ìüíï ãñÜììáôá, áñéèìïýò êáé ôïí "
-"÷áñáêôÞñá underscore"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "ÊáíÝíáò åêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "ÁíÜãíùóç âÜóçò ïäçãþí CUPS"
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Åêêßíçóç óýíäåóçò..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Ñýèìéóç äéêôýïõ"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Ç ïèüíç äåí Ý÷åé ñõèìéóôåß áêüìç"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Ñýèìéóç äéêôýïõ"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Ðïéü óýóôçìá åêôýðùóçò èÝëåôå íá ÷ñçóéìïðïéÞóåôå;"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Õøçëü"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Ðáñáíïúêü"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Ðïéü óýóôçìá åêôýðùóçò èÝëåôå íá ÷ñçóéìïðïéÞóåôå;"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "ÅðéëïãÞ Spooler EêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Ðïéü óýóôçìá åêôýðùóçò èÝëåôå íá ÷ñçóéìïðïéÞóåôå;"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Ñýèìéóç åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "ÅðéëïãÝò åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "Èá èÝëáôå íá ñõèìßóåôå Ýíáí åêôõðùôÞ;"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "ÊáíïíéêÞ ÊáôÜóôáóç"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (ÅðéëïãÞ åî' ïñéóìïý)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "ÁðïìåìáêñõóìÝíïò åîõðçñåôçôÞò CUPS"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "ÁðïìåìáêñõóìÝíïò åîõðçñåôçôÞò CUPS"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "ÐñïóèÞêç åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "ÈÝëåôå íá äïêéìÜóåôå ôéò ñõèìßóåéò;"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Ñõèìßóåéò Äéáäéêôýïõ (Internet)"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Óýíäåóç Internet"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "ÅðéëïãÞ ìïíôÝëïõ åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "Åêôýðùóç äïêéìáóôéêþí óåëßäùí..."
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "ÁðïìåìáêñõóìÝíïò åêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "ÁðïìåìáêñõóìÝíïò åêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "ÈÝëåôå íá åðáíåêêéíÞóåôå ôï äßêôõï;"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "ÁðïìåìáêñõóìÝíïò åêôõðùôÞò"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Ñýèìéóç proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Êáëþò Þëèáôå óôï åñãáëåßï ñýèìéóçò ôïõ proxy.\n"
-"\n"
-"Åäþ, èá ìðïñÝóåôå íá ñõèìßóåôå ôïõò http êáé ftp proxies\n"
-"ìå Þ ÷ùñßò login êáé êùäéêü ðñüóâáóçò\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Ðáñáêáëþ óõìðëçñþóôå ôéò ðëçñïöïñßåò ãéá ôï http proxy\n"
-"ÁöÞóôå ôá êåíÜ áí äåí åðéèõìåßôå http proxy"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "ðüñôá"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Ôï URL ðñÝðåé íá îåêéíÜ ìå 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Ï áñéèìüò èýñáò ðñÝðåé íá åßíáé áñéèìçôéêüò"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Ðáñáêáëþ óõìðëçñþóôå ôéò ðëçñïöïñßåò ãéá ôï ftp proxy\n"
-"ÁöÞóôå ôá êåíÜ áí äåí åðéèõìåßôå ftp proxy"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Ôï Url ðñÝðåé íá îåêéíÜ ìå'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Ðáñáêáëþ åéóÜãåôå proxy login êáé êùäéêü ðñüóâáóçò.\n"
-"ÁöÞóôå ôá êåíÜ åÜí äåí åðéèõìåßôå login/passwd"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "êùäéêüò ðñüóâáóçò"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "îáíáðëçêôñïëïãÞóôå ôïí êùäéêü ðñüóâáóçò"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Ïé êùäéêïß ðñüóâáóçò åßíáé áíüìïéïé. ÐñïóðáèÞóôå îáíÜ!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Äåí ìðïñþ íá ðñïóèÝóù êáôÜôìçóç óôï _ìïñöïðïéçìÝíï_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Äåí ìðïñþ íá áðïèçêåýóù ôï áñ÷åßï %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "áðïôõ÷ßá mkraid"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "áðïôõ÷ßá mkraid (ìÞðùò áðïõóéÜæïõí ôá raidtools;)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Äåí õðÜñ÷ïõí áñêåôÝò êáôáôìÞóåéò ãéá RAID åðéðÝäïõ %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Åêêßíçóç ôïõ ALSA (Advanced Linux Sound Architecture) óõóôÞìáôïò Þ÷ïõ"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, Ýíá ðñüãñáììá ðåñéïäéêÞò åêôÝëåóçò åíôïëþí."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Ôï apmd ðáñáêïëïõèåß êáé êáôáãñÜöåé ôçí êáôÜóôáóç ôçò ìðáôáñßáò.\n"
-"Ìðïñåß åðßóçò íá ÷ñçóéìïðïéçèåß ãéá ôï áõôüìáôï êëåßóéìï ôïõ óõóôÞìáôïò óå \n"
-"ðåñßðôùóç ÷áìçëÞò öüñôéóçò ôçò ìðáôáñßáò."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Åêôåëåß åíôïëÝò ðñïãñáììáôéóìÝíåò áðü ôçí åíôïëÞ at êáé äÝóìåò åíôïëþí\n"
-"üôáí ï öüñôïò ôïõ óõóôÞìáôïò åßíáé áñêåôÜ ÷áìçëüò."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Ôï cron åßíáé ìéá âáóéêÞ õðçñåóßá UNIX ðïõ ôñÝ÷åé åíôïëÝò êáèïñéóìÝíåò áðü \n"
-"ôïí ÷ñÞóôç óå ôáêôÜ ÷ñïíéêÜ äéáóôÞìáôá. Ôï vixie cron ðñïóèÝôåé Ýíáí "
-"áñéèìü \n"
-"åðéðëÝïí äõíáôïôÞôùí ðïõ ðåñéëáìâÜíïõí êáëýôåñç áóöÜëåéá êáé ðéï éó÷õñÝò "
-"ñõèìßóåéò."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"Ôï GPM ðñïóèÝôåé õðïóôÞñéîç mouse óå åöáñìïãÝò âáóéóìÝíåò óå êïíóüëá\n"
-"êåéìÝíïõ êáé åðéôñÝðåé ëåéôïõñãßåò áðïêïðÞò êáé åðéêüëëçóçò ìå ÷ñÞóç \n"
-"mouse óôçí êïíóüëá, êáèþò êáé õðïóôÞñéîç áíáäõïìÝíùí menu."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"Ôï HardDrake ôñÝ÷åé ìéá áíß÷íåõóç õëéêïý êáé ðñïáéñåôéêÜ ñõèìßæåé\n"
-"ôï íÝï/áëëáãìÝíï õëéêü."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Ï Apache åßíáé Ýíáò åîõðçñåôçôÞò WWW. Ìðïñåß íá åîõðçñåôÞóåé áñ÷åßá\n"
-"HTML êáé CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Ç õðçñåóßá õðåñåîõðçñåôçôÞ Internet (inetd) îåêéíÜåé ìéá ðïéêéëßá\n"
-"Üëëùí õðçñåóéþí inetrnet üðïôå ÷ñåéÜæïíôáé. Åßíáé õðåýèõíç ãéá ôçí \n"
-"åêêßíçóç ðïëëþí õðçñåóéþí, üðùò telnet, ftp, rsh êáé rlogin. Ç "
-"áðåíåñãïðïßçóç\n"
-"áõôÞò ôçò õðçñåóßáò áðåíåñãïðïéåß åðßóçò êáé ôéò õðçñåóßåò ãéá ôéò ïðïßåò\n"
-"åßíáé õðåýèõíç."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Åêêßíçóç ðáêÝôïõ filtering ãéá Linux ðõñÞíá ôçò óåéñÜò 2.2, ãéá ñýèìéóç\n"
-"åíüò firewall ðïõ èá ðñïóôáôåýåé ôï ìç÷ÜíçìÜ óáò áðü äéêôõáêÝò åðéèÝóåéò."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Áõôü ôï ðáêÝôï öïñôþíåé ôçí åðéëåãìÝíç äéáñýèìéóç ðëçêôñïëïãßïõ ðïõ Ý÷åé \n"
-"åðéëåãåß óôï /etc/sysconfig/keyboard. Áõôü ìðïñåß íá ñõèìéóôåß ìå ôçí \n"
-"÷ñÞóç ôïõ åñãáëåßïõ kbdconfig. ÐñÝðåé ó÷åäüí ðÜíôá íá åßíáé åíåñãïðïéçìÝíï."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Áõôüìáôç ðáñáãùãÞ ôçò åðéêåöáëßäáò ôïõ ðõñÞíá óôï /boot ãéá ôï\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"Áõôüìáôç áíß÷íåõóç êáé ñýèìéóç óõóêåõþí êáôÜ ôçí åêêßíçóç ôïõ óõóôÞìáôïò."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Ôï Linuxconf êáìéÜ öïñÜ êÜíåé äéÜöïñåò åñãáóßåò\n"
-"êáôÜ ôçí åêêßíçóç ôïõ óõóôÞìáôïò ãéá íá äéáôçñÞóåé ôç ñýèìéóç ôïõ óõóôÞìáôïò."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Ôï lpd åßíáé ç õðçñåóßá åêôõðþóåùí ðïõ áðáéôåßôáé ãéá íá ëåéôïõñãåß \n"
-"ç åíôïëÞ lpd. Åßíáé âáóéêÜ Ýíáò åîõðçñåôçôÞò ðïõ ðñïùèåß ôá áñ÷åßá \n"
-"óôïõò åêôõðùôÝò."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual ÅîõðçñåôçôÞò, ÷ñçóéìïðïéåßôáé ãéá íá äçìéïõñãÞóåé Ýíáí õøçëÞò\n"
-"áðüäïóçò êáé äéáèåóéìüôçôáò åîõðçñåôçôÞ."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"Ï named (BIND) åßíáé Ýíáò Domain Name Server (DNS) ðïõ ÷ñçóéìïðïéåßôáé\n"
-"ãéá íá ìåôáôñÝðåé ïíüìáôá óå äéåõèýíóåéò IP."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"ÓõíäÝåé êáé áðïóõíäÝåé üëá ôá äéêôõáêÜ óõóôÞìáôá áñ÷åßùí (NFS, \n"
-"SMB êáé NCP (Netware))."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Åíåñãïðïéåß/áðåíåñãïðïéåß üëá ôá õðïóõóôÞìáôá äéêôýïõ ðïõ Ý÷ïõí \n"
-"ñõèìéóôåß íá îåêéíïýí êáôÜ ôçí åêêßíçóç."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"Ôï NFS åßíáé Ýíá äçìïöéëÝò ðñùôüêïëï ãéá ôïí äéáìïéñáóìü áñ÷åßùí óå \n"
-"äßêôõá TCP/IP. ÁõôÞ ç õðçñåóßá ðñïóöÝñåé ëåéôïõñãßåò åîõðçñåôçôÞ, ï \n"
-"ïðïßïò ñõèìßæåôáé áðü ôï áñ÷åßï /etc/exports."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"Ôï NFS åßíáé Ýíá äçìïöéëÝò ðñùôüêïëï ãéá ôïí äéáìïéñáóìü áñ÷åßùí óå \n"
-"äßêôõá TCP/IP. ÁõôÞ ç õðçñåóßá ðñïóöÝñåé ëåéôïõñãßåò êëåéäþìáôïò áñ÷åßùí."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Áõôüìáôç åíåñãïðïßçóç ôïõ numlock ðëÞêôñïõ óôçí êïíóüëá\n"
-"êáé ôá XFree êáôá ôçí åêêßíçóç ôïõ óõóôÞìáôïò."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "ÕðïóôÞñéîç ôùí OKI 4w êáé óõìâáôþí winprinters."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Ç õðïóôÞñéîç PCMCIA ðñïóöÝñåé õðïóôÞñéîç ãéá êÜñôåò äéêôýïõ, modems êëð \n"
-"óõíÞèùò óå óõóôÞìáôá laptop. Äåí èá åêêéíÞóåé åêôüò áí áõôü æçôçèåß áðü "
-"ôïí \n"
-"÷ñÞóôç, ïðüôå åßíáé áóöáëÝò íá åãêáôáóôáèåß óå óõóôÞìáôá ðïõ äåí ôï "
-"÷ñåéÜæïíôáé."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Ï portmapper äéá÷åéñßæåôáé óõíäÝóåéò RPC, ïé ïðïßåò ÷ñçóéìïðïéïýíôáé\n"
-"áðü ðñïôüêïëá üðùò ôï NFS êáé ôï NIS. ÐñÝðåé íá åßíáé åíåñãïðïéçìÝíï óå \n"
-"óõóôÞìáôá ðïõ äñïõí ùò åîõðçñåôçôÝò ôÝôïéùí ðñïôïêüëùí."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Ôï postfix åßíáé Ýíáò ðñÜêôïñáò ìåôáöïñÜò áëëçëïãñáößáò, ôï \n"
-"ðñüãñáììá ðïõ öñïíôßæåé ãéá ôçí ìåôáöïñÜ áëëçëïãñáößáò áðü ôï \n"
-"Ýíá óýóôçìá óôï Üëëï."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Áðïèçêåýåé êáé åðáíáöÝñåé ôçí ðçãÞ åíôñïðßáò ôïõ óõóôÞìáôïò ãéá \n"
-"ôçí äçìéïõñãßá êáëýôåñçò ðïéüôçôáò ôõ÷áßùí áñéèìþí."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Ïñéóìüò raw óõóêåõþí ùò block óõóêåõþí (üðùò êáôáôìÞóåéò óêëçñþí\n"
-"äßóêùí), ãéá ôç ÷ñÞóç ôïõò áðü åöáñìïãÝò üðùò ç Oracle"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Ç õðçñåóßá routed åðéôñÝðåé ôçí áõôüìáôç åíçìÝñùóç ôïõ ðßíáêá äñïìïëüãçóçò \n"
-"IP ìÝóù ôïõ ðñùôïêüëïõ RIP. Ðáñ' üëï ðïõ ôï RIP åßíáé åõñÝùò äéáäåäïìÝíï "
-"óå \n"
-"ìéêñÜ äßêôõá, ìåãáëýôåñá äßêôõá áðáéôïýí ðåñéðëïêüôåñá ðñïôüêïëá."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Ôï ðñùôüêïëï rstat åðéôñÝðåé óôïõò ÷ñÞóôåò åíüò äéêôýïõ ôçí\n"
-"óõëëïãÞ ìåôñÞóåùí åðéäüóåùí ãéá ïðïéïäÞðïôå óýóôçìá óå áõôü \n"
-"ôï äßêôõï."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Ôï ðñùôüêïëï rusers åðéôñÝðåé óôïõò ÷ñÞóôåò åíüò äéêôýïõ íá \n"
-"ðñïóäéïñßóïõí ôïõò óõíäåäåìÝíïõò ÷ñÞóôåò Üëëùí óõóôçìÜôùí."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Ôï ðñùôüêïëï rwho åðéôñÝðåé óå áðïìåìáêñõóìÝíïõò ÷ñÞóôåò íá äïõí Ýíáí \n"
-"êáôÜëïãï ôùí ÷ñçóôþí ôïõ óõóôÞìáôïò (ðáñüìïéï ìå ôï finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Åêêßíçóç ôïõ óõóôÞìáôïò Þ÷ïõ óôï ìç÷ÜíçìÜ óáò"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Ôï Syslog åßíáé ç õðçñåóßá ðïõ ÷ñçóéìïðïéïýí ðïëëÝò Üëëåò õðçñåóßåò \n"
-"ãéá íá êÜíïõí åããñáöÝò óôá áñ÷åßá ðáñáêïëïýèçóçò óõóôÞìáôïò (log files)\n"
-"Óõíßóôáôáé ç óõíå÷Þò ëåéôïõñãßá áõôÞò ôçò õðçñåóßáò."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Öüñôùóç ôùí ïäçãþí ãéá ôéò usb óõóêåõÝò óáò."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"ÎåêéíÜåé ôçí õðçñåóßá åîõðçñåôçôÞ ãñáììáôïóåéñþí X Font Server (áõôü åßíáé "
-"áðáñáßôçôï ãéá íá ôñÝ÷ïõí ôá XFree)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "ÅêôõðùôÞò"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Éíôåñíåô"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "ÊáôÜóôáóç óõóôÞìáôïò"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "ÅðéëïãÝò áðïìåìáêñõóìÝíïõ lpd åêôõðùôÞ"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "ÂÜóç ÄåäïìÝíùí"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "ÅîõðçñåôçôÞò"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Ðñïåéäïðïßçóç"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Append"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Yaboot"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "ÅãêáôÜóôáóç ðáêÝôïõ %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Äåí ìðïñþ íá äéáâÜóù ôïí ðßíáêá êáôáôìÞóåùí, åßíáé ðïëý êáôåóôñáìÝíïò :(\n"
-"Èá ðñïóðáèÞóù íá óõíå÷ßóù áöáéñþíôáò ôéò ëáíèáóìÝíåò êáôáôìÞóåéò"
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "ÓöÜëìá!"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Ñõèìßóåéò ìåôÜ ôçí åãêáôÜóôáóç"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Boot Ôýðïõ Ñýèìéóç"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Óõã÷áñçôÞñéá!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Åðéìåñéóìüò óýíäåóçò Internet"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Åðéìåñéóìüò óýíäåóçò Internet åíåñãïðïéçìÝíïò"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ç ñýèìéóç ôïõ åðéìåñéóìïý óýíäåóçò Internet Ý÷åé Þäç ãßíåé.\n"
-"ÁõôÞ ôç óôéãìÞ åßíáé åíåñãÞ.\n"
-"\n"
-"Ôß èÝëåôå íá êÜíåôå;"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "áðåíåñãïðïßçóç"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "Üêõñï"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "åðáíáñýèìéóç"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Áðåíåñãïðïßçóç åîõðçñåôçôþí..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Åðéìåñéóìüò óýíäåóçò Internet áðåíåñãïðïéçìÝíïò"
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Åðéìåñéóìüò óýíäåóçò Internet áðåíåñãïðïéçìÝíïò"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ç ñýèìéóç ôïõ åðéìåñéóìïý óýíäåóçò Internet Ý÷åé Þäç ãßíåé.\n"
-"ÁõôÞ ôç óôéãìÞ åßíáé áíåíåñãüò.\n"
-"\n"
-"Ôß èÝëåôå íá êÜíåôå;"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "åíåñãïðïßçóç"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Åíåñãïðïßçóç åîõðçñåôçôþí..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Åðéìåñéóìüò óýíäåóçò Internet åíåñãïðïéçìÝíïò"
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Ï õðïëïãéóôÞò óáò ìðïñåß íá ñõèìéóôåß Ýôóé þóôå íá ìïéñÜæåôáé \n"
-"ôçí óýíäåóç ìå ôï äéáäßêôõï ìå Üëëïõò õðïëïãéóôÝò.\n"
-"\n"
-"Óçìåßùóç: ×ñåéÜæåóôå Ýíáí ðñïóáñìïãÝá äéêôýïõ Ýôóé þóôå íá äçìéïõñãÞóåôå Ýíá "
-"ôïðéêü äßêôõï (LAN)."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "ÄéåðéöÜíåéá %s (÷ñÞóç áñèñþìáôïò %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "ÄéåðéöÜíåéá %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Äåí âñÝèçêå ðñïóáñìïãÝáò äéêôýïõ óôï óýóôçìÜ óáò!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Äåí âñÝèçêå ðñïóáñìïãÝáò äéêôýïõ Ethernet óôï óýóôçìÜ óáò. Ðáñáêáëþ "
-"÷ñçóéìïðïéåßóôå ôï ðñüãñáììá ñýèìéóçò õëéêïý."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "ÓõóêåõÞ äéêôýïõ"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"ÕðÜñ÷åé ìüíï Ýíáò ñõèìéóìÝíïò ðñïóáñìïãÝáò äéêôýïõ óôï óýóôçìÜ óáò:\n"
-"\n"
-"%s\n"
-"\n"
-"Èá ñõèìéóôåß ôï Ôïðéêü óáò Äßêôõï ìå áõôüí ôïí ðñïóáñìïãÝá."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Ðáñáêáëþ åðéëÝîôå ôé ðñïóáñìïãÝáò äéêôýïõ èá óõíäåèåß\n"
-"óôï ôïðéêü óáò äßêôõï."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Ðñïóï÷Þ, ï ðñïóáñìïãÝáò äéêôýïõ åßíáé Þäç ñõèìéóìÝíïò. Èá ôïí åðáíáñõèìßóù."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"ÐéèáíÞ åðáíá÷ñçóéìïðïßçóç ôçò äéåýèõíóçò LAN óôçí ôñÝ÷ïõóá ñýèìéóç ôïõ %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Áíé÷íåýôçêå ñýèìéóç firewall!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Ðñïóï÷Þ! Áíé÷íåýôçêå õðÜñ÷ïõóá ñýèìéóç firewall. ºóùò ÷ñåéáóôïýí ïñéóìÝíåò"
-"\"÷åéñïêßíçôåò\" ñõèìßóåéò ìåôÜ ôçí åãêáôÜóôáóç."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Ñýèìéóç..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Ñýèìéóç, åãêáôÜóôáóç ëïãéóìéêïý, åêêßíçóç åîõðçñåôçôþí..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Ðñüâëçìá êáôÜ ôçí åãêáôÜóôáóç ôïõ ðáêÝôïõ %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"'Ïëá Ý÷ïõí ñõèìéóôåß.\n"
-"Ìðïñåßôå ôþñá íá ìïéñÜæåóôå ôçí óýíäåóÞ óáò óôï Äéáäßêôõï ìå Üëëïõò "
-"õðïëïãéóôÝò óôï ôïðéêü óáò äßêôõï, ìå ôçí ÷ñÞóç áõôüìáôçò ñýèìéóçò äéêôýïõ "
-"(DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Ç ñýèìéóç Ý÷åé Þäç ãßíåé, áëëÜ áõôÞ ôç óôéãìÞ åßíáé áðåíåñãïðïéçìÝíç."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Ç ñýèìéóç Ý÷åé Þäç ãßíåé, êáé áõôÞ ôç óôéãìÞ åßíáé åíåñãïðïéçìÝíç."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Ï Åðéìåñéóìüò óýíäåóçò Internet äåí Ý÷åé ñõèìéóôåß ðïôÝ."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Ñýèìéóç åðéìåñéóìïý óýíäåóçò Äéáäéêôýïõ (internet)"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Êáëùò Þëèáôå óôï åñãáëåßï ñýèìéóçò ôïõ Åðéìåñéóìïý óýíäåóçò Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"ÊÜíôå êëßê óôï Ñýèìéóç ãéá íá îåêéíÞóåôå ôïí ïäçãü åãêáôÜóôáóçò."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Ñýèìéóç äéêôýïõ (%d adapters)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Ðñïößë: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "ÄéáãñáöÞ ðñïößë..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Ðñïößë ãéá äéáãñáöÞ:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "ÍÝï ðñïößë..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "¼íïìá óõóôÞìáôïò: "
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Ðñüóâáóç óôï Internet"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Ôýðïò:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Ðýëç äéêôýïõ:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "ÄéåðéöÜíåéá:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "ÊáôÜóôáóç:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "ÓõíäÝèçêå"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Äå óõíäÝèçêå"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Óýíäåóç..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Áðïóýíäåóç..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Åêêßíçóç óýíäåóçò..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Êëåßóéìï óýíäåóçò..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Ç óýíäåóç äåí Ýêëåéóå.\n"
-"ÐñïóðáèÞóôå íá ôï êÜíåôå ìüíïò óáò ôñÝ÷ïíôáò\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"ùò root."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Ôï óýóôçìá äåí åßíáé óõíäåäåìÝíï óôï Äéáäßêôõï."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Ñýèìéóç Ðñüóâáóçò óôï Internet..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "Ñýèìéóç LAN"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Ïäçãüò"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "ÄéåðéöÜíåéá"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Ðñùôüêïëëï"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "State"
-msgstr "ÊáôÜóôáóç:"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Ñýèìéóç ôïðéêïý äéêôýïõ..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Åíåñãïðïßçóç"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Ðáñáêáëþ ðåñéìÝíåôå... ÅöáñìïãÞ ñõèìßóåùí"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Äåí Ý÷åôå êÜðïéá ñõèéóìÝíç äéåðéöÜíåéá.\n"
-"Ñõèìßóôå ôéò êÜíïíôáò êëßê óôï 'Ñýèìéóç'"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "Ñýèìéóç LÁÍ"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "ÐñïóáñìïãÝáò %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Ðñùôüêïëëï Åêêßíçóçò"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Îåêßíçóáí óôçí åêêßíçóç óõóôÞìáôïò"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "ðåëÜôçò DHCP"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Äåí Ý÷åôå óýíäåóç ìå ôï internet.\n"
-"ÄçìéïõñãÞóôå ìßá êÜíïíôáò êëßê óôï 'Ñýèìéóç'"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Ñýèìéóç óýíäåóçò Äéáäéêôýïõ (internet)"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Ñýèìéóç Óýíäåóçò Äéáäéêôýïõ (internet)"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Ôýðïò óýíäåóçò: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "ÐáñÜìåôñïé"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "ÊÜñôá Ethernet"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "ÐåëÜôçò DHCP"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Êáëþò Þñèáôå óôïõò Crackers"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Öôù÷ü"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Ðáñáíïúêü"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Áõôü ôï åðßðåäï ðñÝðåé íá ÷ñçóéìïðïéçèåß ìå ðñïóï÷Þ. ÊÜíåé ôï óýóôçìÜ óáò\n"
-"ðéï åõêïëü÷ñçóôï, áëëÜ ðïëý åõáßóèçôï. Äåí ðñÝðåé íá ÷ñçóéìïðïéçèåß óå "
-"óýóôçìá\n"
-"óõíäåäåìÝíï óôï Internet Þ LAN. Äåí õðÜñ÷ïõí ëÝîåéò êëåéäéÜ."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Ôþñá õðÜñ÷ïõí ëÝîåéò êëåéäéÜ, áëëÜ ç ÷ñÞóç ôïõ óõóôÞìáôïò óå äßêôõï \n"
-"äåí óõíßóôáôáé."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Ëßãåò âåëôéþóåéò áóöáëåßáò, ç êýñéá åßíáé üôé õðÜñ÷ïõí ðåñéóóüôåñåò \n"
-"ðñïåéäïðïéÞóåéò êáé Ýëåã÷ïé."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Áõôü åßíáé ôï óõíçèéóìÝíï åðßðåäï áóöáëåßáò ãéá Ýíá óýóôçìá ðïõ èá óõíäåèåß\n"
-"ùò ðåëÜôçò óôï Internet. ÕðÜñ÷ïõí ôþñá Ýëåã÷ïé áóöáëåßáò."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Ìå áõôü ôï åðßðåäï áóöáëåßáò åßíáé äõíáôÞ ç ÷ñÞóç ôïõ óõóôÞìáôïò óôï \n"
-"Internet ùò åîõðçñåôçôÞ. Ç áóöÜëåéá åßíáé áñêåôÜ õøçëÞ þóôå íá äÝ÷åôáé\n"
-"ôáõôü÷ñïíåò óõíäÝóåéò áðü ðïëëïýò ðåëÜôåò."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"ÁóöÜëåéá åðéðÝäïõ 4, ìå ôï óýóôçìá ôåëåßùò êëåéóôü. ÁóöÜëåéá \n"
-"óôï ìÝãéóôï äõíáôü."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "Ñýèìéóç åðéðÝäïõ áóöáëåßáò"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Ñõèìßóåéò X server"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Ñýèìéóç åðéðÝäïõ áóöáëåßáò"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "ÊÝíôñï ÅëÝã÷ïõ"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "ÅðéëÝîôå ôï åñãáëåßï ðïõ èÝëåôå íá ÷ñçóéìïðïéÞóåôå"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "×ñÞóç: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "ÈÝëåôå ôï BackSpace íá åðéóôñÝöåé Delete óôçí êïíóüëá;"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "ÁëëáãÞ Cd-Rom"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Ðáñáêáëþ åéóÜãåôå ôï CD åãêáôÜóôáóçò óôïí ïäçãü óáò êáé ðáôÞóôå Ïê.\n"
-"ÅÜí äåí ôï Ý÷åôå, ðáôÞóôå Áêýñùóç ãéá áðïöõãÞ äéêôõáêÞò áíáâÜèìéóçò."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Äåí ìðïñþ íá îåêéíÞóù ôï live upgrade!!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "äåí âñÝèçêå serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Åîïìïßùóç ôñßôïõ ðëÞêôñïõ;"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Ñýèìéóç Firewalling"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Ñýèìéóç firewalling"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"¸÷åôå Þäç óôçììÝíï Ýíá firewall.\n"
-"ÊÜíôå êëßê óôï Ñýèìéóç ãéá íá áëëÜîåôå Þ íá äéáãñÜøåôå ôï firewall"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"ÊÜíôå êëßê óôï Ñýèìéóç ãéá íá óôÞóåôå Ýíá ôõðéêü firewall"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "ÅðéëÝîôå ãëþóóá"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "ÅðéëÝîôå åãêáôÜóôáóç"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Åíôïðéóìüò óêëçñïý äßóêïõ"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Ñýèìéóç ðïíôéêéïý"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "ÅðéëÝîôå ðëçêôñïëüãéï"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "ÁóöÜëåéá"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Ðñïåô. óõó. áñ÷."
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Ìïñöïð. êáôáôìÞó."
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "ÅðéëïãÞ ðáêÝôùí"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "ÅãêáôÜóôáóç óõóôÞìáôïò"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "ÐñïóèÞêç ÷ñÞóôç"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Ñýèìéóç äéêôýïõ"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Ñýèìéóç õðçñåóéþí"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "ÄéóêÝôá åêêßíçóçò"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Åãê. ðñ. åêêßíçóçò"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Ñýèìéóç ×"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "¸îïäïò"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"ñýèìéóç tinyfirewall\n"
-"\n"
-"Áõôü ñõèìßæåé ôï ðñïóùðéêü óáò firewall ãéá áõôü ôï ìç÷Üíçìá Mandrake "
-"Linux.\n"
-"Ãéá ìéá éó÷õñÞ áöïóéùìÝíç ëýóç firewall, ðáñáêáëþ êïéôÜîôå óôçí\n"
-"åéäéêåõìÝíç MandrakeSecurity Firewall äéáíïìÞ."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Ôþñá èá óáò êÜíïõìå åñùôÞóåéò ãéá ôï ðïéÝò õðçñåóßåò èÝëåôå íá áöÞóåôå\n"
-"íá óõíäÝïíôáé óôï Internet.  Ðáñáêáëþ óêåöôåßôå ðñïóåêôéêÜ ãéá áõôÝò ôéò\n"
-"åñùôÞóåéò, êáèþò ç áóöÜëåéá ôïõ õðïëïãéóôÞ óáò åßíáé óçìáíôéêÞ.\n"
-"\n"
-"Ðáñáêáëþ, áí ôçí ôñÝ÷ïõóá óôéãìÞ äåí ÷ñçóéìïðïéåßôå êÜðïéá áðü áõôÝò ôéò "
-"õðçñåóßåò,\n"
-"âãÜëôå ôçí áðü ôï firewall.  Ìðïñåßôå íá áëëÜîåôå áõôÝò ôéò ñõèìßóåéò "
-"ïðïéáäÞðïôå\n"
-"óôéãìÞ èÝëåôå îáíáôñÝ÷ïíôáò áõôÞí ôçí åöáñìïãÞ!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"ÔñÝ÷åôå Ýíáí åîõðçñåôçôÞ web óå áõôü ôï ìç÷Üíçìá ðïõ ÷ñåéÜæåóôå íá ôïí "
-"âëÝðåé\n"
-"ïëüêëçñï ôï internet; Áí ôñÝ÷åôå Ýíáí åîõðñåôçôÞ web ðïõ ìüíï áõôü ôï "
-"ìç÷Üíçìá\n"
-"÷ñåéÜæåôáé íá ôïí âëÝðåé, ôüôå ìðïñåßôå íá áðáíôÞóåôå Ï×É ìå áóöÜëåéá åäù.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"ÔñÝ÷åôå name åîõðçñåôçôÞ óå áõôü ôï ìç÷Üíçìá; Áí äåí ñõèìßóáôå Ýíáí\n"
-"þóôå íá äßíåé IP êáé ðëçñïöïñßåò æþíçò óå üëï ôï internet, ðáñáêáëþ\n"
-"áðáíôÞóôå ü÷é.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping.äåí åßíáé\n"
-"êñõðôïãñáöçìÝíï -- ïðüôå êÜðïéïé ôáñáîßåò ìðïñïýí íá êëÝøïõí ôïí êùäéêü\n"
-"ðñüóâáóçò áí ôï ÷ñçóéìïðïéåßôå. To ssh åßíáé êñõðôïãñáöçìÝíï êáé äåí ôï "
-"åðéôñÝðåé áõôü."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"ÈÝëåôå íá åðéôñÝøåôå åéóåñ÷üìåíåò óõíäÝóåéò telnet;\n"
-"Áõôü åßíáé ôñáãéêÜ ìç áóöáëÝò, üðùò åîçãÞóáìå óôçí ðñïçãïýìåíç ïèüíç.\n"
-"Ðñïôåßíïõìå íá áðáíôÞóåôå ü÷é åäþ êáé íá ÷ñçóéìïðïéÞóåôå ôï ssh óôç èÝóç "
-"ôïõ\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"ÔñÝ÷åôå Ýíáí FTP åîõðçñåôçôÞ ðïõ ÷ñåéÜæåôáé íá åßíáé ðñïóâÜóéìïò óôï "
-"Internet;\n"
-"Åáí íáé, ôüôå ðñïôåßíïõìå íá ôï ÷ñçóéìïðïéåßôå ãéá Áíþíõìåò ìåôáöïñÝò. "
-"ÏðïéäÞðïôå\n"
-"êùäéêïß ðñüóâáóçò óôÝëíïíôáé áðü ôï FTP ìðïñïýí íá êëáðïýí áðü êÜðïéïõò "
-"ôáñáîßåò,\n"
-"áöïý ôï FTP åðßóçò äåí ÷ñçóéìïðïéåß êñõðôïãñÜöçóç ãéá ôçí ìåôáöïñÜ êùäéêþí "
-"ðñüóâáóçò\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"ÔñÝ÷åôå Ýíáí åîõðçñåôçôÞ ôá÷õäñïìåßïõ åäþ; Åáí óôÝëíåôå ôá \n"
-"ìçíýìáôÜ óáò ìÝóù pine, mutt Þ Üëëïõ ðåëÜôç ôá÷õäñïìåßïõ áðü ôçí êïíóüëá,\n"
-"ôüôå ðéèáíüí íá ôñÝ÷åôå.  Áëëéþò èá ðñÝðåé íá ôï ðåñéïñßóåôå ìå firewall "
-"áõôü.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"ÔñÝ÷åôå Ýíáí POP Þ IMAP åîõðçñåôçôÞ åäþ; Áõôü ÷ñçóéìïðïéåßôáé\n"
-"ãéá ðáñï÷Þ ëïãáñéáóìþí ôá÷õäñïìåßïõ ìç âáóéóìÝíïõ óôï web ãéá áíèñþðïõò \n"
-"ìÝóù áõôïý ôïõ ìç÷áíÞìáôïò.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Öáßíåôáé ðùò ôñÝ÷åôå Ýíáí 2.2 ðõñÞíá.  ÅÜí ç IP óáò\n"
-"åßíáé äõíáìéêÞ, ðñÝðåé íá ôï åðéôñÝøïõìå áõôü.  Åßíáé áõôÞ \n"
-"ç ðåñßðôùóÞ óáò;\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Óõã÷ñïíßæåôáé ç þñá ôïõ õðïëïãéóôÞ óáò ìå Üëëïí õðïëïãéóôÞ;\n"
-"Ðåñéóóüôåñï, áõôü ÷ñçóéìïðïéåßôáé áðü ìåãáëïìåóáßïõò ïñãáíéóìïýò\n"
-"ìå Unix/Linux ãéá íá óõã÷ñïíßæïíôáé ôá logs êëð.  Åáí äåí åßóôå ìÝñïò\n"
-"åíüò ìåãÜëïõ ãñáöåßïõ êáé äåí Ý÷åôå áêïýóåé ãéá áõôü, ôüôå ðéèáíüí \n"
-"íá ìçí éó÷ýåé áõôü."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Ç Ñýèìéóç ïëïêëçñþèçêå.  Íá ãñáöôïýí áõôÝò ïé áëëáãÝò óôï äßóêï;\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Áäõíáìßá áíïßãìáôïò %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "ÓöÜëìá êáôÜ ôï Üíïéãìá ôïõ %s ãéá åããñáöÞ: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "ÕðïëïãéóôÞò Äéêôýïõ (ðåëÜôçò)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, ssh server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Ãñáöåßï"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Óôáèìüò åñãáóßáò Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Åñãáëåßá ãéá Palm Pilot Þ Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Óôáèìüò åñãáóßáò"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domain Name êáé Network Information Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr "Åñãáëåßá ãñáöåßïõ: ÅðåîåñãáóôÝò êåéìÝíïõ, ëïãéóôéêÜ öýëëá êëð"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Åñãáëåßá Þ÷ïõ: mp3 Þ midi players, ìßêôåò êëð"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Âéâëßá êáé ïäçãïß ãéá ôï Linux êáé ôï åëåýèåñï ëïãéóìéêü"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Óôáèìüò åñãáóßáò KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, êëð"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "ÐïëõìÝóá - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Åñãáëåßá ãéá áëëçëïãñáößá, íÝá, web, ìåôáöïñÜ áñ÷åßùí êáé óõíïìéëßá"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "ÂÜóç ÄåäïìÝíùí"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL Þ MySQL database åîõðçñåôçôÞò"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Åñãáëåßá ãéá íá äéåõêïëõíèåßôå óôç ñýèìéóç ôïõ õðïëïãéóôÞ óáò"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "ÐïëõìÝóá - ¹÷ïò"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Åñãáëåßá"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Ôåêìçñßùóç"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Åñãáëåßá êïíóüëáò"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "ÅîõðçñåôçôÞò ôá÷õäñïìåßïõ Postfix, åîõðçñåôçôÞò íåþí Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Óôáèìüò Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Óôáèìüò ðïëõìÝóùí"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Ñýèìéóç LÁÍ"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Ðåñéóóüôåñá ãñáöéêÜ ðåñéâÜëëïíôá (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "Ôï ðåñéâÜëëïí ãñáöåßïõ KDE ìå ìéá óõëëïãÞ óõíïäåõôéêþí åñãáëåßùí"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ãñáöéêü ÐåñéâÜëëïí"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "ÁíÜðôõîç"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Åñãáëåßá ãéá äçìéïõñãßá êáé åããñáöÞ CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Óôáèìüò åñãáóßáò ãñáöåßïõ"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, êëð"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "ÐñïãñÜììáôá ãñáöéêþí üðùò ôï Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "ÂéâëéïèÞêåò áíÜðôõîçò C êáé C++, ðñïãñÜììáôá êáé Üëëá áñ÷åßá"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "ÅîõðçñåôçôÞò äéêôýïõ"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Óôáèìüò ðáé÷íéäéþí"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "ÐñïãñÜììáôá áíáðáñáãùãÞò êáé äéá÷åßñçóçò video"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "ÐïëõìÝóá - ÃñáöéêÜ"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "ÄéáóêÝäáóç (ðáé÷íßäéá)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Åñãáëåßá ãéá áðïóôïëÞ êáé ëÞøç áëëçëïãñáößáò êáé news (pine, mutt, tin...) "
-"êáé Web Browsers"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Áñ÷åéïèÝôçóç, åîïìïéùôÝò, ðáñáêïëïýèçóç"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Äéá÷åßñçóç ðñïóùðéêþí ïéêïíïìéêþí äåäïìÝíùí"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Ãñáöéêü ðåñéâÜëëïí ìå öéëéêÜ åñãáëåßá êáé åöáñìïãÝò"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "ÐåëÜôåò ãéá äéáöïñåôéêÜ ðñùôüêïëëá óõìðåñéëáìâáíïìÝíïõ ôïõ ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Ðýëç Éíôåñíåô"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "ÐñïãñÜììáôá áíáðáñáãùãÞò êáé äéá÷åßñçóçò video êáé Þ÷ïõ"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "¶ëëá ãñáöéêÜ ðåñéâÜëëïíôá"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "ÅðåîåñãáóôÝò êåéìÝíïõ, êåëýöç, åñãáëåßá áñ÷åßùí, ôåñìáôéêÜ"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "ÐñïãñÜììáôá ïéêïíïìéêÞò äéá÷åßñçóçò, üðùò ôï gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Ðáé÷íßäéá"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Äéá÷åßñçóç ðñïóùðéêþí äåäïìÝíùí"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "ÐïëõìÝóá - ÅããñáöÞ CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Óôáèìüò Åñãáóßáò Åðéóôçìïíéêþí åöáñìïãþí"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "áäõíáìßá áíïßãìáôïò ôïõ /etc/sysconfig/autologin ãéá áíÜãíùóç: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "ÈÝëåôå íá åðáíåêêéíÞóåôå ôï äßêôõï;"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Óõìöùíåßôå;"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Èá åðáíåêêéíÞóù ôçí ðáñáêÜôù óõóêåõÞ äéêôýïõ:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Èá åðáíåêêéíÞóù ôçí óõóêåõÞ äéêôýïõ %s. Óõìöùíåßôå;"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Åêôüò êáé áí åßóôå óßãïõñïé üôé äåí åßíáé Ýôóé, ç óõíçèéóìÝíç åðéëïãÞ\n"
-#~ "åßíáé \"/dev/hda\" (ï ðñþôïò äßóêïò óôï ðñþôï êáíÜëé), Þ \"/dev/sda\n"
-#~ "(ï ðñþôïò SCSI äßóêïò)."
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "ÕðÜñ÷ïõí ïé áêüëïõèåò ïõñÝò åêôýðùóçò.\n"
-#~ "Ìðïñåßôå íá ðñïóèÝóåôå êé Üëëåò Þ íá áëëÜîåôå ôéò õðÜñ÷ïõóåò."
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "ÅðéëÝîôå ôïí åî' ïñéóìïý ÷ñÞóôç:"
-
-#~ msgid "Spooler: "
-#~ msgstr "Spooler: "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "ÄïêéìÜóôå ôï ðïíôßêé åäþ."
-
-#~ msgid "Press next to continue."
-#~ msgstr "ÐáôÞóôå åðüìåíï ãéá íá óõíå÷ßóåôå."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Ðáñáêáëþ åðéëÝîôå ãëþóóá ãéá åãêáôÜóôáóç êáé ÷ñÞóç."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "ÐñÝðåé íá áðïäå÷èåßôå ôïõò üñïõò ôçò Üäåéáò ÷ñÞóçò ðñéí óõíå÷ßóåôå ôçí "
-#~ "åãêáôÜóôáóç.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ðáñáêáëþ åðéëÝîôå \"Áðïäï÷Þ\" åÜí óõìöùíåßôå ìå ôïõò üñïõò.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ðáñáêáëþ åðéëÝîôå \"¶ñíçóç\" åÜí äåí óõìöùíåßôå. Ç åãêáôÜóôáóç èá "
-#~ "óôáìáôÞóåé ÷ùñßò íá\n"
-#~ "ðåéñá÷ôåß ôßðïôá."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr ""
-#~ "ÅðéëÝîôå ôçí äéáñýèìéóç ðïõ áíôéóôïé÷åß óôï ðëçêôñïëüãéü óáòáðü ôçí "
-#~ "ðáñáðÜíù ëßóôá"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "ÅÜí èÝëåôå êáé Üëëåò ãëþóóåò (åêôüò áðü áõôÞ ðïõ åðéëÝîáôå óôçí áñ÷Þ)\n"
-#~ "ðáñáêáëþ åðéëÝîôå ôéò áðü ôïí ðáñáðÜíù êáôÜëïãï."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "ÅðéëÝîôå:\n"
-#~ "\n"
-#~ "  - ÐñïóáñìïóìÝíç: ÅÜí åßóôå åîïéêåéùìÝíïò ìå ôï Linux, èá ìðïñÝóåôå íá \n"
-#~ "åðéëÝîåôå ìåôáîý óõóôÞìáôïò ãåíéêÞò ÷ñÞóçò, óõóôÞìáôïò áíÜðôõîçò Þ "
-#~ "åîõðçñåôçôÞ\n"
-#~ "äéêôýïõ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ÅîåéäéêåõìÝíç: ÅÜí åßóôå ðïëý åîïéêåéùìÝíïò ìå óõóôÞìáôá GNU/Linux "
-#~ "êáé\n"
-#~ "èÝëåôå íá ðñáãìáôïðïéÞóåôå ìéá åîáéñåôéêÜ ðñïóáñìïóìÝíç åãêáôÜóôáóç, "
-#~ "ôüôå\n"
-#~ "áõôÞ ç åðéëïãÞ åßíáé ãéá óáò. Èá ìðïñÝóåôå íá åðéëÝîåôå ôýðï "
-#~ "åãêáôÜóôáóçò\n"
-#~ "üðùò êáé óôçí ðáñáðÜíù (\"ÐñïóáñìïóìÝíç\") åðéëïãÞ."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Ïé åðéëïãÝò ðïõ Ý÷åôå ó÷åôéêÜ ìå ôçí ÷ñÞóç ôïõ óõóôÞìáôüò óáò \n"
-#~ "åßíáé ïé áêüëïõèåò:\n"
-#~ "\n"
-#~ "* Óôáèìüò åñãáóßáò: ÅðéëÝîôå áõôÞí åÜí óêïðåýåôå íá ÷ñçóéìïðïéçóåôå ôï "
-#~ "óýóôçìÜ\n"
-#~ "  óáò êõñßùò ãéá êáèçìåñéíÞ ÷ñÞóç, óôï óðßôé Þ óôï ãñáöåßï. \n"
-#~ "\n"
-#~ "* ÁíÜðôõîç: ÅðéëÝîôå áõôü åÜí óêïðåýåôå íá ÷ñçóéìïðïéÞóåôå ôï óýóôçìÜ "
-#~ "óáò\n"
-#~ "  êõñßùò ãéá áíÜðôõîç ëïãéóìéêïý. Èá åãêáôáóôáèåß ìéá ðëÞñçò óõëëïãÞ "
-#~ "åñãáëåßùí\n"
-#~ "  ãéá ìåôáãëþôéóç, áðïóöáëìÜôùóç êáé ìïñöïðïßçóç ðçãáßïõ êþäéêá, êáèþò "
-#~ "êáé\n"
-#~ "  äçìéïõñãßá ðáêÝôùí ëïãéóìéêïý.\n"
-#~ "\n"
-#~ "* ÅîõðçñåôçôÞò: ÅðéëÝîôå áõôü åÜí óêïðåýåôå íá ÷ñçóéìïðïéÞóåôå ôï óýóôçìÜ "
-#~ "óáò\n"
-#~ "  ùò åîõðçñåôçôÞ, åßôå áñ÷åßùí (NFS Þ SMB), åßôå åêôõðþóåùí (lp Þ SMB), "
-#~ "åßôå\n"
-#~ "  ðéóôïðïßçóçò (NIS), âÜóçò äåäïìÝíùí êëð. Óå áõôÞí ôçí ðåñßðôùóç, äåí "
-#~ "èá\n"
-#~ "  åãêáôáóôáèïýí ðñÜãìáôá üðùò ôï KDE, ôï Gnome êëð."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá åðéëÝîåôå ôéò ïìÜäåò ðáêÝôùí ðïõ åðéèõìåßôå íá "
-#~ "åãêáôáóôÞóåôå Þ íá áíáâáèìßóåôå.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ôï DrakX èá ðñïóäéïñßóåé åÜí Ý÷åôå áñêåôü ÷þñï óôïí äßóêï óáò.\n"
-#~ "ÅÜí ü÷é, èá ëÜâåôå ìéá ðñïåéäïðïßçóç. ÅÜí èÝëåôå íá óõíå÷ßóåôå, èá "
-#~ "åãêáôáóôáèïýí\n"
-#~ "üëåò ïé åðéëåãìÝíåò ïìÜäåò, áëëÜ èá áöáéñåèïýí êÜðïéá ðáêÝôá åëÜóóïíïò "
-#~ "åíäéáöÝñïíôïò.\n"
-#~ "Óôï êÜôù ìÝñïò ôçò ëßóôáò ìðïñåßôå íá åðéëÝîåôå \"ÅðéëïãÞ áíåîÜñôçôùí "
-#~ "ðáêÝôùí\". Óå áõôÞ\n"
-#~ "ôç ðåñßðôùóç èá ðñÝðåé íá åðéëÝîåôå áíÜìåóá óå ðáñáðÜíù áðü 1000 ðáêÝôá."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá åðéëÝîåôå áíåîÜñôçôá üëá ôá ðáêÝôá ðïõ åðéèõìåßôå \n"
-#~ "íá åãêáôáóôÞóåôå.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ìðïñåßôå íá áíáðôýîåôå Þ íá óõìðôýîåôå ôï äÝíôñï åðéëÝãïíôáò ôéò "
-#~ "åðéëïãÝò\n"
-#~ "óôçí áñéóôåñÞ ãùíßá ôïõ ðáñáèýñïõ ôùí ðáêÝôùí.\n"
-#~ "\n"
-#~ "\n"
-#~ "ÅÜí ðñïôéìÜôå íá íá âëÝðåôå ôá ðáêÝôá ôáîéíïìçìÝíá áëöáâçôéêÜ, ðáôÞóôå\n"
-#~ "\"ÅíáëëáãÞ ïìáäïðïßçóçò\".\n"
-#~ "\n"
-#~ "\n"
-#~ "ÅÜí äåí èÝëåôå íá ëáìâÜíåôå ðñïåéäïðïéÞóåéò ãéá åîáñôÞóåéò, ðáôÞóôå\n"
-#~ "\"Áõôüìáôåò åîáñôÞóåéò\". Óçìåéþóôå üôé óå áõôÞí ôçí ðåñßðôùóç, ç \n"
-#~ "áðïåðéëïãÞ åíüò ðáêÝôïõ ìðïñåß íá ðñïêáëÝóåé ôçí óéùðçëÞ áðïåðéëïãÞ \n"
-#~ "êáé Üëëùí ðáêÝôùí ðïõ åîáñôþíôáé áðü áõôü."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "ÅÜí Ý÷åôå üëá ôá ðáñáðÜíù CDs, ðáôÞóôå Ok.\n"
-#~ "ÅÜí äåí Ý÷åôå êáíÝíá áðü ôá ðáñáðÜíù CDs, ðáôÞóôå Áêýñùóç.\n"
-#~ "ÅÜí äåí Ý÷åôå êÜðïéá áðü áõôÜ, áðïåðéëÝîôå ôá êáé ðáôÞóôå Ok."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "Ôþñá ìðïñåßôå íá äïêéìÜóåôå ôï ðïíôßêé óáò. ×ñçóéìïðïéÞóôå ôá êïõìðéÜ êáé "
-#~ "ôç ñïäÝëá ãéá íá\n"
-#~ "åðéâåâáéþóåôå ðùò ïé ñõèìßóåéò åßíáé óùóôÝò. Áí äåí åßíáé, ìðïñåßôå íá "
-#~ "êÜíåôå êëßê óôï \"¶êõñï\"\n"
-#~ "ãéá íá åðéëÝîåôå Ýíáí Üëëï ïäçãü.\n"
-#~ "\n"
-#~ "\n"
-#~ "Åáí êÜíåôå åãêáôÜóôáóç óå Ýíá ìç÷Üíçìá Apple ìå ðïíôßêé åíüò êïõìðéïý, èá "
-#~ "óáò äïèåß ç\n"
-#~ "åõêáéñåßá íá ïñßóåôå êÜðïéá êïõìðéÜ ôïõ ðëçêôñïëïãßïõ þóôå íá åîïìïéþóåôå "
-#~ "ôï 2ï êáé ôï 3ï\n"
-#~ "êïõìðß ôïõ ðïíôéêéïý. Áõôü èá óáò åðéôñÝøåé íá Ý÷åôå ðñüóâáóç óôçí ðëÞñç "
-#~ "ëåéôïõñãéêüôçôá\n"
-#~ "ôïõ ðïíôéêéïý ôüóï óôçí êïíóüëá ôïõ Linux üóï êáé óôï X Window GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "Áí Ý÷åôå Ýíá ADB ðïíôßêé, ðáñáêáëþ åðéëÝîôå USB, êáèþò ï ðõñÞíáò ôïõ "
-#~ "Linux èá öñïíôßóåé\n"
-#~ "ãéá ôï ðïíôßêé óáò êáôÜëëçëá."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "ÅÜí èÝëåôå íá óõíäÝóåôå ôïí õðïëïãéóôÞ óáò óôï Äéáäßêôõï Þ óå Ýíá "
-#~ "ôïðéêü \n"
-#~ "äßêôõï, ðáñáêáëþ êÜíôå ôçí êáôÜëëçëç åðéëïãÞ, áöïý áíïßîåôå ôçí äéêôõáêÞ "
-#~ "óáò \n"
-#~ "óõóêåõÞ þóôå ôï DrakX íá ôçí åíôïðßóåé áõôüìáôá.\n"
-#~ "\n"
-#~ "\n"
-#~ "ÅÜí äåí Ý÷åôå êáìßá äéêôõáêÞ óýíäåóç, åðéëÝîôå \"Áðåíåñãïðïßçóç äéêôýïõ"
-#~ "\".\n"
-#~ "\n"
-#~ "\n"
-#~ "ÅÜí èÝëåôå íá ñõèìßóåôå ôï äßêôõï áñãüôåñá, Þ áí ôåëåéþóáôå ìå ôéò \n"
-#~ "ñõèìßóåéò äéêôýïõ, åðéëÝîôå \"ÔÝëïò\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Äåí åíôïðßóôçêå modem. Ðáñáêáëþ åðéëÝîôå ôçí óåéñéáêÞ èýñá óôçí ïðïßá\n"
-#~ "åßíáé óõíäåäåìÝíï.\n"
-#~ "\n"
-#~ "\n"
-#~ "ÐëçñïöïñéáêÜ, ç ðñþôç èýñá (ðïõ ïíïìÜæåôáé \"COM1\" óôá Microsoft "
-#~ "Windows),\n"
-#~ "óôï Linux ïíïìÜæåôáé \"ttyS0\"."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá åðéëÝîåôå ôéò ñõèìßóåéò dial-up. ÅÜí äåí îÝñåôå Þ äåí "
-#~ "åßóôå\n"
-#~ "óßãïõñïò ãéá áõôÝò ôéò ñõèìßóåéò, ìðïñåßôå íá ôéò ðëçñïöïñçèåßôå áðü "
-#~ "ôïí \n"
-#~ "ðáñï÷Ýá óáò. ÅÜí äåí ïñßóåôå åîõðçñåôçôÞ ïíïìÜôùí (DNS), èá ïñéóôåß "
-#~ "áõôüìáôá \n"
-#~ "êáôÜ ôçí óýíäåóç."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "ÅÜí ôï modem óáò åßíáé åîùôåñéêü, ðáñáêáëþ áíïßîôå ôï þóôå ôï DrakX íá "
-#~ "ìðïñÝóåé íá ôï åíôïðßóåé áõôüìáôá."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Ðáñáêáëþ áíïßîôå ôï modem óáò êáé åðéëÝîôå ôï óùóôü."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá åðéëÝîåôå ôéò ñõèìßóåéò dial-up. ÅÜí äåí îÝñåôå Þ äåí "
-#~ "åßóôå\n"
-#~ "óßãïõñïò ãéá áõôÝò ôéò ñõèìßóåéò, ìðïñåßôå íá ôéò ðëçñïöïñçèåßôå áðü "
-#~ "ôïí \n"
-#~ "ðáñï÷Ýá óáò. ÅÜí äåí ïñßóåôå åîõðçñåôçôÞ ïíïìÜôùí (DNS), èá ïñéóôåß "
-#~ "áõôüìáôá \n"
-#~ "êáôÜ ôçí óýíäåóç."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá åéóÜãåôå ôï äéêôõáêü üíïìá (åÜí ÷ñåéÜæåôáé). ÅÜí äåí "
-#~ "åßóôå óßãïõñïò,\n"
-#~ "ìðïñåßôå íá æçôÞóåôå ðëçñïöïñßåò áðü ôïí ðáñï÷Ýá óáò."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá ñõèìßóåôå ôçí óõóêåõÞ äéêôýïõ.\n"
-#~ "\n"
-#~ "  - Äéåýèõíóç IP: ÅÜí äåí ôçí îÝñåôå, ñùôÞóôå ôïí õðåýèõíï äéêôýïõ Þ\n"
-#~ "ôïí ðáñï÷Ýá óáò.\n"
-#~ "Äåí ðñÝðåé íá åéóÜãåôå äéåýèõíóç IP åÜí åðéëÝîåôå \"Áõôüìáôç áðüäïóç IP"
-#~ "\"\n"
-#~ "ðáñáêÜôù.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ÌÜóêá äéêôýïõ: \"255.255.255.0\" åßíáé óõíÞèùò êáëÞ åðéëïãÞ. ÅÜí äåí\n"
-#~ "åßóôå óßãïõñïò, ñùôÞóôå ôïí õðåýèõíï äéêôýïõ Þ ôïí ðáñï÷Ýá óáò.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Áõôüìáôç áðüäïóç IP: ÅÜí ôï äßêôõü óáò ÷ñçóéìïðïéåß Ýíá áðü ôá "
-#~ "ðñïôüêïëëá\n"
-#~ "BOOTP Þ DHCP, åðéëÝîôå áõôü. Óå áõôÞ ôçí ðåñßðôùóç, äåí ÷ñåéÜæåôáé íá "
-#~ "äþóåôå\n"
-#~ "äéåýèõíóç IP. ÅÜí äåí åßóôå óßãïõñïò, ñùôÞóôå ôïí õðåýèõíï äéêôýïõ Þ\n"
-#~ "ôïí ðáñï÷Ýá óáò."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá åéóÜãåôå ôï äéêôõáêü óáò üíïìá. ÅÜí äåí\n"
-#~ "åßóôå óßãïõñïé, óõìâïõëåõèåßôå ôïí õðåýèõíï äéêôýïõ."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá åéóÜãåôå ôï äéêôõáêü óáò üíïìá. ÅÜí äåí\n"
-#~ "åßóôå óßãïõñïé, áöÞóôå ôï êåíü."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá åéóÜãåôå ôéò åðéëïãÝò ôïõ dialup. ÅÜí äåí åßóôå "
-#~ "óßãïõñïò,\n"
-#~ "ìðïñåßôå íá æçôÞóåôå ðëçñïöïñßåò áðü ôïí ðáñï÷Ýá óáò."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "ÅÜí ÷ñçóéìïðïéÞóåôå proxies, ðáñáêáëþ ñõèìßóôå ôïõò ôþñá. ÅÜí äåí "
-#~ "îÝñåôå,\n"
-#~ "ñùôÞóôå ôïí ðáñï÷Ýá óáò Þ ôïí õðåýèõíï äéêôýïõ."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Áí ç óýíäåóÞ óáò ìå ôï Äéáäßêôõï åßíáé óùóôÜ ñõèìéóìÝíç, ìðïñåßôå íá\n"
-#~ "åãêáôáóôÞóåôå ðáêÝôï êñõðôïãñáößáò. Ðñþôá åðéëÝîôå Ýíáí ôüðï áð'\n"
-#~ "üðïõ èá êáôåâÜóåôå ôá ðáêÝôá êáé ìåôÜ åðéëÝîôå ðïéÜ ðáêÝôá èá\n"
-#~ "åãêáôáóôÞóåôå.\n"
-#~ "\n"
-#~ "Óçìåéþóôå üôé ðñÝðåé íá åðéëÝîåôå ôüðï êáé ðáêÝôá óýìöùíá ìå ôçí\n"
-#~ "íïìïèåóßá óáò."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Ìðïñåßôå ôþñá íá åðéëÝîåôå æþíç þñáò áíÜëïãá ìå ôçí ôïðïèåóßá óáò."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Ìðïñåßôå íá ïñßóåôå Ýíáí ôïðéêü åêôõðùôÞ (óõíäåäåìÝíï óôïí õðïëïãéóôÞ "
-#~ "óáò) \n"
-#~ "Þ Ýíáí áðïìåìáêñõóìÝíï (ðñïóâÜóéìï ìÝóù UNIX äéêôýïõ, Netware Þ äéêôýïõ \n"
-#~ "Microsoft Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "ÅÜí èÝëåôå íá åêôõðþíåôå, åðéëÝîôå Ýíá óðü ôá äýï óõóôÞìáôá åêôýðùóçò \n"
-#~ "(CUPS êáé LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ôï CUPS åßíáé Ýíá íÝï, äõíáôü êáé åõÝëéêôï óýóôçìá åêôýðùóçò ãéá UNIX \n"
-#~ "óõóôÞìáôá. ÁõôÞ åßíáé ç âáóéêÞ åðéëïãÞ ãéá ôï Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ôï LPR åßíáé ôï ðáëéü êëáóóéêü óýóôçìá åêôýðùóçò.\n"
-#~ "\n"
-#~ "ÅÜí äåí Ý÷åôå óêôõðùôÞ, åðéëÝîôå \"ÊáíÝíá\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "Ôï GNU/Linux ìðïñåß íá óõíåñãáóôåß ìå äéÜöïñïõò ôýðïõò åêôõðùôþí. Ï "
-#~ "êáèÝíáò áðü\n"
-#~ "áõôïýò ÷ñåéÜæåôáé äéáöïñåôéêÝò ñõèìßóåéò.\n"
-#~ "\n"
-#~ "ÅÜí ï åêôõðùôÞò óáò åßíáé óõíäåäåìÝíïò óôï óýóôçìÜ óáò, åðéëÝîôå "
-#~ "\"Ôïðéêüò\n"
-#~ "ÅêôõðùôÞò\".\n"
-#~ "\n"
-#~ "ÅÜí èÝëåôå íá åêôõðþíåôå óå Ýíáí åêôõðùôÞ ôïðïèåôçìÝíï óå áðïìåìáêñõóìÝíï "
-#~ "UNIX\n"
-#~ "óýóôçìá, åðéëÝîôå \"ÁðïìåìáêñõóìÝíïò åêôõðùôÞò\".\n"
-#~ "\n"
-#~ "\n"
-#~ "ÅÜí èÝëåôå íá åêôõðþíåôå óå Ýíáí åêôõðùôÞ ôïðïèåôçìÝíï óå áðïìåìáêñõóìÝíï "
-#~ "Windows\n"
-#~ "óýóôçìá (Þ UNIX ìå SMB ðñùôüêïëëï), åðéëÝîôå \"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Ðáñáêáëþ áíÜøôå ôïí åêôõðùôÞ óáò ãéá íá ôï áíé÷íåýóåé ôï DrakX.\n"
-#~ "\n"
-#~ "ÐñÝðåé íá åéóÜãåôå êÜðïéåò ðëçñïöïñßåò åäþ.\n"
-#~ "\n"
-#~ "\n"
-#~ "...* ¼íïìá åêôõðùôÞ: ï print spooler ÷ñçóéìïðïéåß ôï \"lp\"ùò ôï "
-#~ "ðñïêáèïñéóìÝíï üíïìá. Ïðüôå, ðñÝðåé íá Ý÷åôå Ýíáí åêôõðùôÞ ïíüìáôé \"lp"
-#~ "\".\n"
-#~ "     Åáí Ý÷åôå ìüíï Ýíáí åêôõðùôÞ, ìðïñåßôå íá ÷ñçóéìïðïéÞôå ðïëëÜ "
-#~ "ïíüìáôá ãéá áõôüí.Áðëþò èá ðñÝðåé íá ôá äéá÷ùñßóåôå ìå Ýíá pipe\n"
-#~ "     ÷áñáêôÞñá (Ýíá \"|\"). Ïðüôå, åáí ðñïôéìÜôå Ýíá ðïéï óçìáíôéêü "
-#~ "üíïìá, ðñÝðåé íá ôï âÜëåôå ðñþôï, ð.÷: \"My printer|lp\".\n"
-#~ "     Ï åêôõðùôÞò ðïõ Ý÷åé ôï \"lp\" óôá ïíüìáôÜ ôïõ èá åßíáé ï "
-#~ "ðñïêáèïñéóìÝíïò åêôõðùôÞò.\n"
-#~ "\n"
-#~ "\n"
-#~ "...* ÐåñéãñáöÞ: áõôü åßíáé ðñïáéñåôéêü áëëÜ ìðïñåß íá åßíáé ÷ñÞóéìï åáí "
-#~ "ðïëëïß åêôõðùôÝò åßíáé óõíäåäåìÝíïé óôïí õðïëïãéóôÞ óáò Þ áí åðéôñÝðåôå\n"
-#~ "     Üëëïõò õðïëïãéóôÝò íá Ý÷ïõí ðñüóâáóç óå áõôüí ôïí åêôõðùôÞ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Ôïðïèåóßá: åáí èÝëåôå íá äþóåôå êÜðïéåò ðëçñïöïñßåò ó÷åôéêÜ ìå ôçí\n"
-#~ "     ôïðïèåóßá ôïõ åêôõðùôÞ óáò, âÜëôå ôéò åäþ (åßóôå åëåýèåñïò íá "
-#~ "ãñÜøåôå üôé\n"
-#~ "     èÝëåôå, ãéá ðáñÜäåéãìá \"2ïò üñïöïò\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "ÐñÝðåé íá åéóÜãåôå êÜðïéåò ðëçñïöïñßåò åäþ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ¼íïìá ïõñÜò: ï print spooler ÷ñçóéìïðïéåß ôï \"lp\" ùò ôï "
-#~ "ðñïêáèïñéóìÝíï üíïìá åêôõðùôÞ. Ïðüôå, ðñÝðåé íá Ý÷åôå Ýíáí åêôõðùôÞ ìå ôï "
-#~ "üíïìá \"lp\".\n"
-#~ "     Åáí Ý÷åôå ìüíï Ýíáí åêôõðùôÞ, ìðïñåßôå íá ÷ñçóéìïðïéÞóåôå ðïëëÜ "
-#~ "ïíüìáôá ãéá áõôüí. ÁðëÜ ðñÝðåé íá ôá ÷ùñßóåôå ìå Ýíá pipe\n"
-#~ "     ÷áñáêôÞñá (Ýíá \"|\"). Ïðüôå, åáí ðñïôéìÜôå íá Ý÷åôå Ýíá ðéï "
-#~ "óçìáíôéêü üíïìá, ðñÝðåé íá ôï âÜëåôå ðñþôï, ð.÷: \"My printer|lp\".\n"
-#~ "     Ï åêôõðùôÞò ìå ôï \"lp\" óôá ïíüìáôÜ ôïõ èá åßíáé ï ðñïêáèïñéóìÝíïò "
-#~ "åêôõðùôÞò.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * ÊáôÜëïãïò Spool: áõôüò åßíáé ï êáôÜëïãïò ðïõ áðïèçêåýïíôáé ïé "
-#~ "åñãáóßåò ôïõ åêôõðùôÞ. ÄéáôçñÞóôå ôçí åî' ïñéóìïý åðéëïãÞ\n"
-#~ "     åáí äåí îÝñåôå ôß íá ÷ñçóéìïðïéÞóåôå\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Óýíäåóç ÅêôõðùôÞ: Åáí ï åêôõðùôÞò óáò åßíáé öõóéêþò óõíäåäåìÝíïò "
-#~ "óôïí õðïëïãéóôÞ óáò, åðéëÝîôå \"Ôïðéêüò åêôõðùôÞò\".\n"
-#~ "     Åáí èÝëåôå íá Ý÷åôå ðñüóâáóç óå Ýíáí åêôõðùôÞ ðïõ âñßóêåôáé óå Ýíá "
-#~ "áðïìáêñõóìÝíï Unix ìç÷Üíçìá, åðéëÝîôå \"ÁðïìáêñõóìÝíïò lpd åêôõðùôÞò\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Åáí èÝëåôå íá Ý÷åôå ðñüóâáóç óå Ýíáí åêôõðùôÞ ðïõ âñßóêåôáé óå Ýíá "
-#~ "áðïìáêñõóìÝíï Microsoft Windows ìç÷Üíçìá (Þ óå Ýíá Unix ìç÷Üíçìá ìå SMB\n"
-#~ "     ðñùôüêïëëï), åðéëÝîôå \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Åáí èÝëåôå íá Ý÷åôå ðñüóâáóç óå Ýíáí åêôõðùôÞ ðïõ âñßóêåôáé óå Ýíá "
-#~ "NetWare äßêôõï, åðéëÝîôå \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Äåí åíôïðßóôçêå åêôõðùôÞò. Ðáñáêáëþ åéóÜãåôå ôï üíïìá ôçò óõóêåõÞò óôçí\n"
-#~ " ïðïßá åßíáé óõíäåäåìÝíïò.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ïé ðåñéóóüôåñïé åêôõðùôÝò óõíäÝïíôáé óôçí ðñþôç ðáñÜëëçëç èýñá. ÁõôÞ "
-#~ "ïíïìÜæåôáé\n"
-#~ "\"/dev/lp0\" óôï GNU/Linux êáé \"LPT1\" óôá Microsoft Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "ÅðéëÝîôå ôïí åêôõðùôÞ óáò óôïí ðáñáðÜíù êáôÜëïãï"
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Ðáñáêáëþ åðéëÝîôå ôéò êáôÜëëçëåò ñõèìßóåéò ãéá ôïí åêôõðùôÞ óáò.\n"
-#~ "ÊïéôÜîôå ôçí ôåêìçñßùóç ôïõ åêôõðùôÞ åÜí äåí îÝñåôå ôé íá åðéëÝîåôå.\n"
-#~ "\n"
-#~ "\n"
-#~ "¸÷åôå ôçí äõíáôüôçôá íá åëÝãîåôå ôéò åðéëïãÝò óáò óôï åðüìåíï âÞìá êáé "
-#~ "íáôéò ôñïðïðïéÞóåôå áí äåí ëåéôïõñãïýí üðùò èá èÝëáôå."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá ïñßóåôå ôç ëÝîç-êëåéäß ãéá ôïí ÷ñÞóôç \"root\".\n"
-#~ "Ç ëÝîç ðñÝðåé íá åéóá÷èåß åéò äéðëïýí ãéá åðéâåâáßùóç.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ï root åßíáé ï äéá÷åéñéóôÞò ôïõ óõóôÞìáôïò êáé ï ìüíïò ðïõ Ý÷åé \n"
-#~ "ôï äéêáßùìá íá áëëÜîåé ôéò ñõèìßóåéò ôïõ óõóôÞìáôïò. Ãé áõôü, \n"
-#~ "åðéëÝîôå ðñïóåêôéêÜ áõôÞ ôç ëÝîç êëåéäß! Ìç åîïõóéïäïôçìÝíç \n"
-#~ "ðñüóâáóç óôï root ìðïñåß íá åßíáéåîáéñåôéêÜ åðéêßíäõíç ãéá \n"
-#~ "ôçí áêåñáéüôçôá ôïõ óõóôÞìáôïò êáé ôùí äåäïìÝíùí ôïõ, êáèþò \n"
-#~ "êáé ãéá Üëëá óõóôÞìáôá óõíäåäåìÝíá óå áõôü. \n"
-#~ "\n"
-#~ "\n"
-#~ "Ç ëÝîç êëåéäß ðñÝðåé íá åßíáé ìéá ìßîç áëöáñéèìçôéêþí ÷áñáêôÞñùí \n"
-#~ "êáé ìå ìÞêïò ôïõëÜ÷éóôïí ïêôþ (8) ÷áñáêôÞñùí. Äåí ðñÝðåé *ðïôÝ* \n"
-#~ "íá ôï ãñÜøåôå óå ÷áñôß."
-
-#~ msgid ""
-#~ "If your network uses LDAP (or NIS) protocol for authentication, select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "Áí ôï äßêôõü óáò õðïóôçñßæåé LDAP (Þ NIS) ðñùôüêïëëï ãéá åîáêñßâùóç, "
-#~ "åðéëÝîôå\n"
-#~ "\"LDAP\" (Þ \"NIS\") ùò åîáêñßâùóç. Áí äåí ãíùñßæåôå, ñùôÞóôå ôïí "
-#~ "äéá÷åéñéóôÞ\n"
-#~ "äéêôýïõ óáò.\n"
-#~ "Áí ï õðïëïãéóôÞò óáò äåí åßíáé óõíäåäåìÝíïò óå äßêôõï ìå äéá÷åéñéóôÞ, "
-#~ "ôüôå ðéèáíüôáôá íá èÝëåôå íá\n"
-#~ "åðéëÝîåôå \"ÔïðéêÜ áñ÷åßá\" ãéá åîáêñßâùóç."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá äçìéïõñãÞóåôå Ýíáí Þ ðåñéóóüôåñïõò \"áðëïýò\" ÷ñÞóôåò,\n"
-#~ "(óå áíôßèåóç ìå ôïí \"åîïõóéïäïôçìÝíï\" ÷ñÞóôç, root). Ìðïñåßôå íá \n"
-#~ "äçìéïõñãÞóåôå Ýíáí Þ ðåñéóóüôåñïõò ÷ñÞóôåò ãéá êÜèå ðñüóùðï ðïõ èÝëåôå\n"
-#~ "íá Ý÷åé ðñüóâáóç óôï óýóôçìÜ óáò. Óçìåéþóôå üôé êÜèå ÷ñÞóôçò Ý÷åé ôéò\n"
-#~ "äéêÝò ôïõ ñõèìßóåéò (ãñáöéêü ðåñéâÜëëïí, ñõèìßóåéò åöáñìïãþí êëð),\n"
-#~ "êáèþò êáé ôï äéêü ôïõ \"home directory\", óôï ïðïßï áðïèçêåýïíôáé\n"
-#~ "áõôÝò ïé ñõèìßóåéò.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êáô' áñ÷Þí, äçìéïõñãÞóôå Ýíáí ÷ñÞóôç ãéá ôïí åáõôü óáò! Áêüìá êáé åÜí\n"
-#~ "åßóôå ï ìïíáäéêüò ÷ñçóôçò ôïõ óõóôÞìáôïò, ÄÅÍ ðñÝðåé íá ÷ñçóéìïðïéåßôå\n"
-#~ "ôï root ãéá ôçí êáèçìåñéíÞ ÷ñÞóç ôïõ óõóôÞìáôïò, äéüôé áõôü èá \n"
-#~ "äçìéïõñãïýóå êéíäõíïõò. ¸íá áðëü ëÜèïò ðëçêôñïëüãçóçò åßíáé áñêåôü\n"
-#~ "ãéá íá êáôáóôñÝøåé ôçí åãêáôÜóôáóÞ óáò üôáí åñãÜæåóôå ùò root.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ãé áõôü, èá ðñÝðåé íá óõíäÝåóôå óôï óýóôçìÜ óáò ÷ñçóéìïðïéþíôáò Ýíáí\n"
-#~ "êùäéêü áðëïý ÷ñÞóôç êáé íá óõíäÝåóôå ùò root ìüíï ãéá åñãáóßåò äéïßêçóçò\n"
-#~ "êáé óõíôÞñçóçò ôïõ óõóôÞìáôïò."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Óõíßóôáôáé íá äçìéïõñãÞóåôå Ýíáí äßóêï åêêßíçóçò. ÅÜí äåí \n"
-#~ "ìðïñåßôå íá åêêéíÞóåôå ôïí õðïëïãéóôÞ óáò, åßíáé ï ìüíïò ôñüðïò \n"
-#~ "íá äéáóþóåôå ôï óýóôçìÜ óáò ÷ùñßò åðáíåãêáôÜóôáóç."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Ïé êýñéåò åðéëïãÝò ôïõ LILO êáé ôïõ grub åßíáé:\n"
-#~ "  - ÓõóêåõÞ åêêßíçóçò: Ïñßæåé ôï üíïìá ôçò óõóêåõÞò (ð.÷. ìéá \n"
-#~ "êáôÜôìçóç) ðïõ ðåñéÝ÷åé ôïí ôïìÝá åêêßíçóçò. Åêôüò êáé áí åßóôå\n"
-#~ "óßãïõñïé üôé åßíáé áëëéþò, åðéëÝîôå \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ÊáèõóôÝñçóç ðñéí ôçí åêêßíçóç: Ïñßæåé ôá äÝêáôá ôïõ äåõôåñïëÝðôïõ\n"
-#~ "ðïõ ôï óýóôçìá èá ðåñéìÝíåé ðñéí åêêéíÞóåé ôï ðñþôï ëåéôïõñãéêü.\n"
-#~ "Áõôü åßíáé óõíÞèùò ÷ñÞóéìï óå óõóôÞìáôá ðïõ åêêéíïýí áðü ôïí äßóêï\n"
-#~ "áìÝóùò ìåôÜ ôçí åíåñãïðïßçóç ôïõ ðëçêôñïëïãßïõ. Äåí õðÜñ÷åé êáèõóôÝñçóç\n"
-#~ "åÜí ï áñéèìüò ðáñáëåéöèåß Þ åßíáé ìçäÝí.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ÁíÜëõóç ïèüíçò: Áõôü ïñßæåé ôçí VGA áíÜëõóç êåéìÝíïõ ðïõ èá åðéëåãåß\n"
-#~ "êáôÜ ôçí åêêßíçóç. ÕðÜñ÷ïõí ïé ðáñáêÜôù åðéëïãÝò: \n"
-#~ "\n"
-#~ "    * normal: ÊáíïíéêÞ áíÜëõóç êåéìÝíïõ 80×25.\n"
-#~ "\n"
-#~ "    * <áñéèìüò>: ÷ñÞóç ôçò áíôßóôïé÷çò áíÜëõóçò êåéìÝíïõ.\n"
-#~ "\n"
-#~ "  - Êáèáñéóìüò \"/tmp\" óå êÜèå åêêßíçóç: åáí èÝëåôå íá óâÞíåôå üëá ôá "
-#~ "áñ÷åßá êáé ôïõ öáêÝëïõò\n"
-#~ "ðïõ åßíáé óôï \"/tmp\" üôáí îåêéíÜôå ôï óýóôçìÜ óáò, åíåñãïðïéÞóôå áõôÞí "
-#~ "ôçí åðéëïãÞ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ÁêñéâÞò RAM áí ÷ñåéÜæåôáé: äõóôõ÷þò, äåí õðÜñ÷åé óôåñåüôõðç ìÝèïäïò "
-#~ "íá äþóåé ôï\n"
-#~ "BIOS ôïí áêñéâÞ áñéèìü RAM ôïõ õðïëïãéóôÞ óáò. Óáí óõíÝðåéá, ôï Linux "
-#~ "ßóùò\n"
-#~ "áðïôý÷åé íá áíé÷íåýóåé ôçí RAM óùóôÜ. Óå áõôÞí ôçí ðåñßðôùóç, ìðïñåßôå\n"
-#~ "íá ïñßóåôå ôïí óùóôü áñéèìü åäþ. Ðáñáêáëþ óçìåéþóôå ðùò ìéá äéáöïñÜ ôçò "
-#~ "ôÜîçò ôùí 2 Þ 4\n"
-#~ "MB ìåôáîý ôçò ìíÞìçò ðïõ áíé÷íåýôçêå êáé ôçò ðñáãìáôéêÞò RAM ôïõ "
-#~ "óõóôÞìáôüò óáò åßíáé êáíïíéêÞ."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "Ôï SILO åßíáé ðñüãñáììá åêêßíçóçò ãéá SPARC: Ìðïñåß íá åêêéíÞóåé \n"
-#~ "ôï GNU/Linux Þ ïðïéïäÞðïôå Üëëï ëåéôïõñãéêü õðÜñ÷åé óôï óýóôçìÜ óáò. "
-#~ "ÊáíïíéêÜ, \n"
-#~ "ôá åðéðëÝïí ëåéôïõñãéêÜ ðñïóäéïñßæïíôáé êáé ñõèìßæïíôáé óùóôÜ. ÅÜí áõôü "
-#~ "äåí \n"
-#~ "óõíÝâç, ìðïñåßôå íá ðñïóèÝóåôå åðéðëÝïí åðéëïãÝò óå áõôÞí ôçí ïèüíç. \n"
-#~ "ÐñïóÝîôå íá åðéëÝîåôå ôéò óùóôÝò ðáñáìÝôñïõò.\n"
-#~ "\n"
-#~ "Ìðïñåßôå åðßóçò íá áðïêëåßóåôå ôçí ðñüóâáóç óå Üëëá ëåéôïõñãéêÜ óõóôÞìáôá "
-#~ "áöáéñþíôáò\n"
-#~ "ôéò áíôßóôïé÷åò åðéëïãÝò. Óå áõôÞí üìùò ôçí ðåñßðôùóç, èá ÷ñåéáóôåßôå "
-#~ "äéóêÝôôá åêêßíçóçò\n"
-#~ "ãéá íá ôá ÷ñçóéìïðïéÞóåôå!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Ïé êýñéåò åðéëïãÝò ôïõ SILO åßíáé:\n"
-#~ "  - ÅãêáôÜóôáóç bootloader: Ïñßæåé ôï ðïý èÝëåôå íá åãêáôáóôáèïýí ïé "
-#~ "áðáñáßôçôåò\n"
-#~ "ãéá ôçí åêêßíçóç ôïõ GNU/Linux ðëçñïöïñßåò. Åêôüò êé áí îÝñåôå ôé áêñéâþò "
-#~ "êÜíåôå,\n"
-#~ "åðéëÝîôå \"Ðñþôïò ôïìÝáò ôïõ äßóêïõ (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ÊáèõóôÝñçóç ðñéí ôçí åêêßíçóç: Ïñßæåé ôá äÝêáôá ôïõ äåõôåñïëÝðôïõ\n"
-#~ "ðïõ ôï óýóôçìá èá ðåñéìÝíåé ðñéí åêêéíÞóåé ôï ðñþôï ëåéôïõñãéêü.\n"
-#~ "Áõôü åßíáé óõíÞèùò ÷ñÞóéìï óå óõóôÞìáôá ðïõ åêêéíïýí áðü ôïí äßóêï\n"
-#~ "áìÝóùò ìåôÜ ôçí åíåñãïðïßçóç ôïõ ðëçêôñïëïãßïõ. Äåí õðÜñ÷åé êáèõóôÝñçóç\n"
-#~ "åÜí ï áñéèìüò ðáñáëåéöèåß Þ åßíáé ìçäÝí."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Ôþñá ðñÝðåé íá ñõèìßóåôå ôï X Window System, ôï ïðïßï åßíáé ï \n"
-#~ "ðõñÞíáò ôïõ ãñáöéêïý ðåñéâÜëëïíôïò (GUI) ôïõ GNU/Linux. ÐñÝðåé íá\n"
-#~ "ñõèìßóåôå ôçí êÜñôá ãñáöéêþí êáé ôçí ïèüíç óáò. Ôï ìåãáëýôåñï\n"
-#~ "ìÝñïò ôçò äéáäéêáóßáò åßíáé áõôïìáôïðïéçìÝíï, ïðüôå ç óõìâïëÞ\n"
-#~ "óáò óõíßóôáôáé óôçí åðéâåâáßùóç êáé áðïäï÷Þ ôùí áõôïìÜôùí \n"
-#~ "ñõèìßóåùí :)\n"
-#~ "\n"
-#~ "\n"
-#~ "¼ôáí ïëïêëçñùèåß ç äéáäéêáóßá ñýèìéóçò, èá îåêéíÞóåé ôï\n"
-#~ "X Window óýóôçìá (åêôüò åÜí åóåßò áðïöáóßóåôå áëëéþò), ãéá\n"
-#~ "íá åëÝãîåôå åÜí ïé ñõèìßóåéò óáò éêáíïðïéïýí. ÅÜí ü÷é, \n"
-#~ "ìðïñåßôå íá åðéóôñÝøåôå åäþ êáé íá åðáíáëÜâåôå ôéò ñõèìßóåéò\n"
-#~ "üóåò öïñÝò ÷ñåéáóôåß."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "ÅÜí êÜôé äåí ðÜåé êáëÜ ìå ôéò ñõèìßóåéò ôùí ×, ÷ñçóéìïðïéåßóôå áõôÝò ôéò\n"
-#~ "åðéëïãÝò ãéá íá ñõèìßóåôå óùóôÜ ôï ãñáöéêü ðåñéâÜëëïí (X Window System)."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "ÅÜí ðñïôéìÜôå åêêßíçóç óå ãñáöéêü ðåñéâÜëëïí åðéëÝîôå \"Íáé\". Áëëéþò, \n"
-#~ "åðéëÝîôå \"¼÷é\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Ìðïñåßôå íá åðéëÝîåôå Ýíá åðßðåäï áóöÜëåéáò ãéá ôï óýóôçìÜ óáò. Ðáñáêáëþ "
-#~ "äéáâÜóôå ôï manual ãéá ðëÞñåéò\n"
-#~ "  ðëçñïöïñßåò. ÂáóéêÜ, áí äåí îÝñåôå ôß íá åðéëÝîåôå, êñáôÞóôå ôçò "
-#~ "ðñïêáèïñéóìÝíåò åðéëïãÝò.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Ôï óýóôçìÜ óáò èá åðáíåêêéíÞóåé.\n"
-#~ "\n"
-#~ "ÌåôÜ ôçí åðáíåêêßíçóç, ôï íÝï óáò Mandrake Linux óýóôçìá èá îåêéíÞóåé\n"
-#~ "áõôüìáôá. ÅÜí èÝëåôå íá åêêéíÞóåôå Ýíá Üëëï õðÜñ÷ïí ëåéôïõñãéêü, "
-#~ "ðáñáêáëþ\n"
-#~ "äéáâÜóôå ôéò ó÷åôéêÝò ïäçãßåò."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "ÔóÝ÷éêï (ÐñïãñáììáôéóôÝò)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Óëïâáêßáò (ðñïãñáììáôéóôÝò)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "¼íïìá ôïõ ðñïößë ãéá äçìéïõñãßá:"
-
-#~ msgid "/File/_New"
-#~ msgstr "/Áñ÷åßï/_ÍÝï"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>N"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/Áñ÷åßï/_Áíïéãìá"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>O"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/Áñ÷åßï/Áðï_èÞêåõóç"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/Áñ÷åßï/ÁðïèÞêåõóç _Ùò"
-
-#~ msgid "/File/-"
-#~ msgstr "/Áñ÷åßï/-"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/ÅðéëïãÝò/ÔÝóô"
-
-#~ msgid "/_Help"
-#~ msgstr "/_ÂïÞèåéá"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/ÂïÞèåéá/_Ó÷åôéêÜ ìå..."
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Åî' ïñéóìïý Runlevel"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "ÁðïèÞêåõóç /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "ÅðáíáöïñÜ áðü áñ÷åßï"
-
-#~ msgid "Save in file"
-#~ msgstr "ÁðïèÞêåõóç óå áñ÷åßï"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "ÅðáíáöïñÜ áðü äéóêÝôôá"
-
-#~ msgid "Format all"
-#~ msgstr "Ìïñöïðïßçóç üëùí"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "ÌåôÜ ôçí ìïñöïðïßçóç üëùí ôùí êáôáôìÞóåùí,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "üëá ôá äåäïìÝíá óå áõôÝò ôéò êáôáôìÞóåéò èá ÷áèïýí"
-
-#~ msgid "Reload"
-#~ msgstr "Åðáíáöüñôùóç"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "ÈÝëåôå íá äçìéïõñãÞóåôå ìéá äéóêÝôôá áõôüìáôçò åãêáôÜóôáóçò ãéá "
-#~ "êëùíïðïßçóç áõôÞò ôçò åãêáôÜóôáóçò;"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Ñõèìßóåéò ADSL"
-
-#~ msgid "Europe"
-#~ msgstr "Åõñþðç"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "¼íïìá áðïìåìáêñõóìÝíçò ïõñÜò ëåßðåé!"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "Åäþ ìðïñåßôå íá ïñßóåôå ìéá ãñáììÞ åíôïëþí óôçí ïðïßá ç äéåñãáóßá èá "
-#~ "äéáóùëçíþíåôáé áíôß íá óôÝëíåôáé êáôåõèåßáí óôïí åêôõðùôÞ."
-
-#~ msgid "Command line"
-#~ msgstr "ÃñáììÞ åíôïëþí"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "Ìéá ãñáììÞ åíôïëþí ðñÝðåé íá åéóá÷èåß!"
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "ÅéóÜãåôå ôï üíïìá ôïõ åêôõðùôÞ êáé ó÷üëéá"
-
-#~ msgid "Remove queue"
-#~ msgstr "ÄéáãñáöÞ ïõñÜò"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Ôá ðåñéå÷üìåíá ôïõ áñ÷åßïõ ñõèìßóåùí äåí ìðïñïýí íá ìåôáöñáóôïýí"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Ìç áíáãíùñßóéìï áñ÷åßï ñõèìßóåùí"
-
-#~ msgid "Adapter"
-#~ msgstr "Adapter"
-
-#~ msgid "Disable network"
-#~ msgstr "Áðåíåñãïðïßçóç äéêôýïõ"
-
-#~ msgid "Enable network"
-#~ msgstr "Åíåñãïðïßçóç äéêôýïõ"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Åðßâëåøç Äéêôýïõ"
-
-#~ msgid "Settings"
-#~ msgstr "Ñõèìßóåéò"
-
-#~ msgid "Profile "
-#~ msgstr "Ðñïößë "
-
-#~ msgid "Statistics"
-#~ msgstr "ÓôáôéóôéêÜ"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Ôá÷ýôçôá ÁðïóôïëÞò: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Ôá÷ýôçôá ËÞøçò: "
-
-#~ msgid "Logs"
-#~ msgstr "Logs"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Óýíäåóç óôï äéáäßêôõï (internet)"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Áðïóýíäåóç áðü ôï äéáäßêôõï (internet)"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Áðïóýíäåóç áðü ôï äéáäßêôõï (internet) áðÝôõ÷å."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Áðïóýíäåóç áðü ôï äéáäßêôõï (internet) ïëïêëçñþèçêå"
-
-#~ msgid "Connection complete."
-#~ msgstr "Ç óýíäåóç ïëïêëçñþèçêå"
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Ç óýíäåóç áðÝôõ÷å.\n"
-#~ "Åðéâåâáéþóôå ôéò ñõèìßóåéò óáò óôï ÊÝíôñï ÅëÝã÷ïõ Mandrake."
-
-#~ msgid "Color configuration"
-#~ msgstr "Ñõèìßóåéò ÷ñùìÜôùí"
-
-#~ msgid "sent: "
-#~ msgstr "áðïóôÜëèçêáí: "
-
-#~ msgid "received: "
-#~ msgstr "åëÞöèçóáí: "
-
-#~ msgid "average"
-#~ msgstr "ìÝóïò üñïò"
-
-#~ msgid "Connect"
-#~ msgstr "Óýíäåóç"
-
-#~ msgid "Disconnect"
-#~ msgstr "Áðïóýíäåóç"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá äïêéìÜóåôå ôï ðïíôßêé óáò. ÄïêéìÜóôå ôá ðëÞêôñá êáé ôï\n"
-#~ "ñïäÜêé êáé âåâáéùèåßôå üôé üëá ëåéôïõñãïýí üðùò ðñÝðåé. Áí ü÷é, åðéëÝîôå\n"
-#~ "\"Áêýñùóç\" êáé åðéëÝîôå Üëëïí ïäçãü."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Óýíäåóç DSL (Þ ADSL)"
-
-#~ msgid "Choose"
-#~ msgstr "ÅðéëïãÞ"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Ìðïñåßôå íá äþóåôå êáôåõèåßáí ôï URI ãéá ðñüóâáóç óôïí åêôõðùôÞ ìÝóù CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Íáé, óôåßëå äïêéìáóôéêÞ óåëßäá ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Íáé, óôåßëå äïêéìáóôéêÞ óåëßäá PostScrip"
-
-#~ msgid "Yes, print both test pages"
-#~ msgstr "Íáé, óôåßëå êáé ôéò äýï äïêéìáóôéêÝò óåëßäåò"
-
-#~ msgid "Paper Size"
-#~ msgstr "ÌÝãåèïò ÷áñôéïý"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "ÁðïâïëÞ ÷áñôéïý ìå ôï ðÝñáò ôçò åêôýðùóçò;"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "ÅðéëïãÝò ïäçãïý Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "ÅðéëïãÝò âÜèïõò ÷ñþìáôïò"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Åêôýðùóç êåéìÝíïõ óáí PostScript;"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Äéüñèùóç êåéìÝíïõ-óêÜëáò;"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Áñéèìüò óåëßäùí áíÜ óåëßäåò åîüäïõ"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "ÁñéóôåñÜ/äåîéÜ ðåñéèþñéá óå óôéãìÝò (1/72 ôçò ßíôóáò)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "ÐÜíù/êÜôù ðåñéèþñéá óå óôéãìÝò (1/72 ôçò ßíôóáò)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "ÅðéðëÝïí åðéëïãÝò GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "ÅðéðëÝïí åðéëïãÝò êåéìÝíïõ"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Áíôßóôñïöç óåéñÜ óåëßäùí;"
-
-#~ msgid "CUPS starting"
-#~ msgstr "Åêêßíçóç CUPS"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Ôñüðïò óýíäåóçò áðïìåìáêñõóìÝíïõ åêôõðùôÞ"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected.\n"
-#~ "In case of doubt, select \"Remote CUPS server\"."
-#~ msgstr ""
-#~ "Ìå ôçí ÷ñÞóç åîõðçñåôçôÞ CUPS, äåí ÷ñåéÜæåôáé íá ñõèìßóåôå åêôõðùôÝò \n"
-#~ "åäþ. Ïé åêôõðùôÝò èá áíáãíùñéóôïýí áõôüìáôá. Áí Ý÷åôå áìöéâïëßá, "
-#~ "åðéëÝîôå\n"
-#~ "\"ÅîõðçñåôçôÞ CUPS\"."
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "ÊÜèå åêôõðùôÞò  ÷ñåéÜæåôáé Ýíá üíïìá (ãéá ðáñÜäåéãìá lp). Ìðïñïýí åðßóçò "
-#~ "íá \n"
-#~ "ïñéóôïýí Üëëåò ðáñÜìåôñïé üðùò ðåñéãñáöÞ Þ ç ôïðïèåóßá. Ôé üíïìá íá \n"
-#~ "ïñßóù ãé áõôüí ôïí åêôõðùôÞ êáé ðþò åßíáé óõíäåäåìÝíïò ï åêôõðùôçò;"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "ÊÜèå ïõñÜ åêôõðùôÞ (óôçí ïðïßá óôÝëíïíôáé ïé åêôõðþóåéò) ÷ñåéÜæåôáé\n"
-#~ "Ýíá üíïìá (óõ÷íÜ lp) êáé Ýíáí êáôÜëïãï. Ôé üíïìá êáé êáôÜëïãï íá \n"
-#~ "ïñßóù ãé áõôÞí ôçí ïõñÜ åêôõðùôÞ êáé ðþò åßíáé óõíäåäåìÝíïò ï åêôõðùôçò;"
-
-#~ msgid "Name of queue"
-#~ msgstr "¼íïìá ïõñÜò"
-
-#~ msgid "Spool directory"
-#~ msgstr "ÊáôÜëïãïò"
-
-#~ msgid "Light configuration"
-#~ msgstr "ÅëáöñéÜ ñýèìéóç"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2"
diff --git a/perl-install/share/po/eo.po b/perl-install/share/po/eo.po
deleted file mode 100644
index 7c86e3d3f..000000000
--- a/perl-install/share/po/eo.po
+++ /dev/null
@@ -1,8914 +0,0 @@
-#
-# MESAØOJ DE DrakX
-# D. Dale Gulledge <dsplat@rochester.rr.com>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-08-02 22:36-0500\n"
-"Last-Translator: D. Dale Gulledge <dsplat@rochester.rr.com>\n"
-"Language-Team: Esperanto <eo@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-3\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Plur-ekrana konfigura¼o"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Grafika karto"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Elektu grafikan karton"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Elektu X servilon"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X servilo"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Kiun konfiguron de XFree vi deziras havi?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
-"XFree %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Vi povas havi 3D aparatan akceladan subtenon kun XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s kun 3D aparata akcelado"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
-"NOTU KE ÆI TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN KOMPUTILON."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s kun EKSPERIMENTA 3D aparata akcelado"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
-"NOTU KE ÆI TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN "
-"KOMPUTILON.\n"
-"XFree %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree Konfigurado"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Elektu memorkapaciton de via grafika karto"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Elektu opciojn por servilo"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Elektu ekranon"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Ekrano"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"La du gravegaj parametroj estas la vertikala refreþigrapido (vertical\n"
-"refresh rate) kiu estas la rapido por refreþigi la tutan ekranon, kaj\n"
-"plej grave la horizontala sinkronrapido (horizontal sync rate), kiu estas\n"
-"la rapido por montri skanliniojn.\n"
-"\n"
-"Øi estas TRE GRAVA ke vi ne elektas specon de ekrano kiu havas\n"
-"sinkronamplekson kiu estas preter la kapabloj de via ekrano: vi eble\n"
-"difektus vian ekranon.  Se vi dubas, elektu zorgeman opcion."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Horizontala sinkronrapido (horizontal sync rate)"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Vertikala refreþigrapido (vertical refresh rate)"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Ekrano ne estas konfigurata"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Grafika karto ne jam konfigurita"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Vi ne jam elektas distingivojn"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Averto: provado de æi tiu grafika karto eble svenigos vian komputilon"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Provu konfigura¼on"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"penu þanøi iom da parametroj"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Eraro okazis:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Mi eliros post %d sekundoj"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Æu tio æi pravas?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Eraro okazis, penu þanøi iom da parametroj"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Distingivo"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Elektu distingivon kaj kolorprofundon"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafika karto: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 servilo: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Spertula Modalo"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Montru tuton"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Distingivoj"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klavara aranøo: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Speco de muso: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Musaparato: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Ekrano: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Ekrana horizontala sinkronrapido (horizontal sync rate): %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Ekrana vertikala refreþigrapido (vertical refresh rate): %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafika karto: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafika karto: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Graifka memoro: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kolorprofuneco: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Distingivo: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 servilo: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 pelilo: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Preparas X-Fenestran konfigura¼on"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Kion vi deziras fari?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Þanøu Ekranon"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Þanøu Grafika karto"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Þanøu Servilajn opciojn"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Þanøu distingivon"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Montru informon"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Provu denove"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Æesu"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Æu vi deziras teni la þanøojn?\n"
-"Nuna konfiguro estas:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Bonvolu resaluti en %s-n por aktivigi la þanøojn."
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"Bonvole adiaýu kaj sekve uzu Kontrol-Alt-Retropaþo (Ctrl-Alt-Backspace)."
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X Fenestro æe komenco"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Mi povas konfiguri vian komputilon tiel ke øi aýtomate lanæos X kiam øi\n"
-"ekfunkcias.  Æu vi deziras ke X aýtomate lanæos?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 koloroj (8 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil koloroj (15 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil koloroj (16 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milionoj koloroj (24 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardoj koloroj (32 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB aý pli"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Normala VGA, 640x480 æe 60 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Supera VGA, 800x600 æe 56 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr ""
-"8514 kongrua karto, 1024x768 æe 87 hercoj (Hz) interplektita (neniu 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr ""
-"Supera VGA, 1024x768 æe 87 hercoj (Hz) interplektita, 800x600 æe 56 hercoj"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Etendita Supera VGA, 800x600 æe 60 hercoj (Hz), 640x480 æe 72 hercoj"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr ""
-"Neinterplektita Supera VGA, 1024x768 æe 60 hercoj (Hz), 640x480 æe 72 hercoj"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Altfrekvenca Supera VGA, 1024x768 æe 70 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Plurfrekvenca kiu povas fari 1024x768 æe 60 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Plurfrekvenca kiu povas fari 1280x1024 æe 74 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Plurfrekvenca kiu povas fari 1280x1024 æe 76 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Ekrano kiu povas fari 1600x1200 æe 70 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Ekrano kiu povas fari 1600x1200 æe 76 hercoj (Hz)"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Unua sektoro de starta subdisko"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Unu sektoro de drajvo (ÆefStartRikordo)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILO Instalado"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Kie vi deziras instali la startþargilon?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "LILO/grub Instalado"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Startþargilo æefaj opcioj"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Startþargilo por uzi"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Startþargila instalado"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Starta aparato"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne funkcias kun malnovaj BIOSoj)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Kompakta"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "kompakta"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Grafika reøimo"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Prokrastoperiodo antaý starti defaýltan sistemon"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Pasvorto"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Pasvorto (denove)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Limigu komandliniajn opciojn"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "limigu"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Purigu /tmp dum æiuj startadoj"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Preciza kvanto de memoro se bezonata (trovis %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Ebligu multoblajn profilojn"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Donu kvanton de memoro en MB"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcio ``Limigu komandliniajn opciojn'' ne estas utila sen pasvorto"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Bonvole provu denove"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "La pasvortoj ne egalas"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Defaýlta Mastruma Sistemo?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Jen la diversaj enskriboj.\n"
-"Vi povas aldoni pli aý þanøi la ekzistantajn."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Aldonu"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Finata"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Þanøu"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Kiun specon de enskribo vi deziras aldoni"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linukso"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Alia Mastruma Sistemo (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Alia Mastruma Sistemo (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Alia Mastruma Sistemo (Vindozo...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Kerna bildo"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Radiko"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Alfiksu"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Lega-skriba"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tabelo"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Danøera"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Etikedo"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Defaýlta"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-grandeco"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Forigu enskribon"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Malplena etikedo ne estas permesata"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Æi tiu etikedo estas jam uzata"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Trovis %s %s interfacojn"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Æu vi havas alian?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Æu vi havas iun %s interfacon?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Jes"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Vidu hardvaran informon"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalas pelilon por %s karto %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(modulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kiun %s pelilon devus mi provi?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Iuokaze, la %s pelilo bezonas havi aldonan informon por øuste funkcii,\n"
-"kvankam øi normale funkcias bone sen la informo.  Æu vi deziras specifi\n"
-"aldonajn opciojn por øi aý permesi al la pelilo esplori vian komputilon\n"
-"por la informo øi bezonas?  Kelkfoje, esplori svenas komputilon, sed\n"
-"øi ne devus kaýzi difekton."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Aýtomate esploru"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Specifu opciojn"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Nun vi povas provizi øiajn opciojn al modulo %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Nun vi povas provizi øiajn opciojn al modulo %s.\n"
-"Opcioj estas en la formo ``nomo=valoro nomo2=valoro2 ...''.\n"
-"Ekzemple, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Modulaj opcioj:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Þargado de modulo %s malsukcesis.\n"
-"Æu vi deziras trovi denove kun aliaj parametroj?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(jam aldonis %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Æi tiu pasvorto estas tro simpla"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Bonvole donu salutnomon"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Salutnomo devas enhavi nur minusklojn, ciferojn, `-' kaj `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Æi tiu salutnomo estas jam aldonita"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Aldonu uzanto"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Enigu uzanton\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Akceptu uzanto"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Vera nomo"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Salutnomo"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Þelo"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Piktogramo"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Aýtomata-enregistrado"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Mi povas konfiguri vian komputilon por aýtomate enregistri unu uzulon kiam\n"
-"øi startas.  Se vi ne deziras uzi æi tion, alklaku la `Nuligu' butonon."
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Elektu la defaýltan uzulon:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Elektu la fenestro-administrilon por lanæi:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Vi povas elektu aliajn lingvojn kiujn estos uzeblaj malantaý la instalado"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Æiuj"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Bonvenon al %s, la mastruma sistema elektilo!\n"
-"\n"
-"Elektu mastruman sistemon de la supra listo aý\n"
-"atendu dum %d sekundoj por defaýlta starto.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bonvenon al GRUB la elektilo por mastrumaj sistemoj!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Uzu la %c kaj %c klavoj por elekti kiun enskribon estas emfazata."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Premu la enenklavon por starti la elektatan mastruman sistemon, 'e' por\n"
-"redakti la"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ordonoj antaux startado, aux 'c' por uzi komandan linion."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "La emfazata enskribo startos auxtomate post %d sekundoj."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "mankas sufiæe da spaco en /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Kie vi deziras instali la startþargilon?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "Post-instala konfigurado"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Dosiero"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Dosiero/_Eliru"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>E"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NovStila Ekrano"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradicia Ekrano"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradicia Gtk+ Ekrano"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modalo"
-
-#: ../../bootlook.pm_.c:102
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Konfiguru"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Starta modalo"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Sistema modalo"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "Jes"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Nuligu"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr ""
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Instalado de LILO malsukcesis.  La sekvanta eraro okazis:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutoj"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundoj"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Bonvolu fari rezervan kopion de via dateno antaýe"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Legu zorge"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Se vi intencas uzi \"aboot\", zorgu lasi liberan spacon (2048 sektoroj "
-"sufiæas)\n"
-"æe la komenco de la disko"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Eraro"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Soræisto"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Nova"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "Malproksima printvico"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Surmetingo"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Opcioj"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Malmuntu"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Muntu"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Elektu agon"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Vi havas unu grandan FAT subdiskon.\n"
-"(øenerale uzata de MicroSoft DOS/Vindozo).\n"
-"Mi sugestas ke vi unue regrandecigi tiun subdiskon\n"
-"(klaku sur øin, kaj poste klaku sur \"Regrandecigu\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Bonvolu klaki sur subdiskon"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Bonvolu klaki sur subdiskon"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Bonvolu klaki sur subdiskon"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Detaloj"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "2a Etendata (Ext2)"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "Dosierlokigtabelo (FAT)"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "muntado malsukcesis"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Interþanøa"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Malplena"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Alia"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Specoj de dosiersistemoj:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Kreu"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Uzu ``%s'' anstataýe"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Forigu"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Uzu ``Malmuntu'' antaýe"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Post vi þanøas la specon de subdisko %s, æiuj datenoj en æi tiu subdisko "
-"estos\n"
-"perdata"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kie vi deziras munti aparato %s?"
-
-#: ../../diskdrake.pm_.c:500
-#, fuzzy
-msgid "Mount options"
-msgstr "Modulaj opcioj:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:525
-#, fuzzy
-msgid "Removable media"
-msgstr "Aýtomata muntado de demetebla medio"
-
-#: ../../diskdrake.pm_.c:532
-#, fuzzy
-msgid "Change type"
-msgstr "Þanøu subdiskspecon"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Kiun dosierosistemo vi deziras uzi?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Servilo"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Elektu agon"
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Kreu novan subdiskon"
-
-#: ../../diskdrake_interactive.pm_.c:188
-#, fuzzy
-msgid "Exit"
-msgstr "2a Etendata (Ext2)"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Þanøu al Spertula reøimo"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Þanøu al Normala reøimo"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Malfaru"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Æu mi devus daýri malgraýe?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Æu eliru sen konservi"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Æu eliru sen skribi la subdisktabelon?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Aýtomate disponigu"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Forviþu æion"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Plu"
-
-#: ../../diskdrake_interactive.pm_.c:250
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Detektado de fiksdisko(j)"
-
-#: ../../diskdrake_interactive.pm_.c:267
-#, fuzzy
-msgid "Not enough space for auto-allocating"
-msgstr "Mankas sufiæan da libera spaco por disponigi novajn subdiskojn"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Æiuj el la subdiskoj estas uzata"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Mi ne povas aldoni plu da subdiskoj"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Por havi plu da subdiskoj, bonvole forigu unu por povi krei etendigitan\n"
-"subdiskon"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Skribu subdiskotabelon"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Sava subdiskotabelo"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Sava subdiskotabelo"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Sava subdiskotabelo"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Aýtomata muntado de demetebla medio"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Elektu dosieron"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La rezerva subdisktabelo ne estas la sama grandeco\n"
-"Æu daýras tamen?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Averto"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Enþovu disketon en drajvo\n"
-"Æiuj datenoj sur tiu disketo estos perdata"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Provas savi subdisktabelon"
-
-#: ../../diskdrake_interactive.pm_.c:340
-#, fuzzy
-msgid "Detailed information"
-msgstr "Montru informon"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Regrandecigu"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Movu"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formatu"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Aktiva"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Aldonu al RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Aldonu al LVM (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Forigu de RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Forigu de LVM (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Þanøu RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Uzu por retrokonektado"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Kreu novan subdiskon"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Komenca sektoro: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Grandeco en MB: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Speco de dosiersistemo: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Surmetingo: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Prefero: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatas retrokonektan dosieron %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Þanøu subdiskspecon"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kie vi deziras munti retrokonektan dosieron %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ne povas malfiksi surmetingon æar æi tiu subdisko estas uzata por\n"
-"retrokonektado.  Unue forigu la retrokonektadon."
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Kalkulas FAT dosiersistemajn limojn"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Regrandecigas"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Æi tiu subdisko ne estas regrandecigebla"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Æiuj datenoj en æi tiu subdisko devus esti rezervata"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Post vi regrandecigas subdiskon %s, æiuj datenoj en æi tiu subdisko estos\n"
-"perdata"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Elektu la novan grandecon"
-
-#: ../../diskdrake_interactive.pm_.c:591
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Grandeco en MB: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Al kiu disko vi deziras movi?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sektoro"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Al kiu sektoro vi deziras movi?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Movante"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Movas subdisko..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "nova"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr ""
-"Elektu ekzistantan RAID (Redundanca Aro de Malmultekostaj Diskoj) por\n"
-"aldoni al"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Vi ne povas uzi æi tiun subdiskon por retrokonektado"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Retrokonektado"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Retrokonekta dosieronomo: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Vera nomo"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Alia retrokonektado jam uzas tiun dosieron, elektu alian"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Dosiero jam ekzistas.  Æu vi deziras uzi øin?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "aparato"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "nivelo"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "grandeco de pecoj"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Zorgu: æi tiu operacio estas danøera."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Kiun specon de subdiskado?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Bedaýrinde mi ne kreas /boot tiom longe sur la drajvon (æe cilindro > "
-"1024).\n"
-"Aý vi uzos LILO kaj øi ne funkcios, aý vi ne uzos LILO kaj vi ne bezonas\n"
-"/boot."
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"La subdiskon vi elektis por aldoni kiel la radiko (root, /) estas fizike\n"
-"situanta preter la 1024a cilindro de la drajvo, kaj vi ne havas /boot\n"
-"subdiskon.  Se vi intencas uzi la LILO startadministranto, zorgu aldoni\n"
-"/boot subdiskon."
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Vi elektis softvaran RAID-an subdiskon por la radika dosiersistemo (/).\n"
-"Neniu startþargilo povas trakti tiun sen /boot subdisko.\n"
-"Do zorgu aldoni /boot subdiskon."
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "La subdisktabelo de drajvo %s estos skribata al disko!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Vi bezonos restarti antaý ol la þanøo povas efektiviøi"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Post vi formatas la subdiskon %s, æiuj datenoj en æi tiu subdisko estos\n"
-"perdata"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Formatas"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatas retrokonektan dosieron %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatas subdiskon %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid malsukcesis"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Mankas sufiæan da libera spaco por disponigi novajn subdiskojn"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Mankas sufiæan da libera spaco por disponigi novajn subdiskojn"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Distingivo: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Aparato: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-a diskingolitero: %s (nur konjekto)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Speco: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Nomo: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Komenco: sektoro %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Grandeco: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektoroj"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "De cilindro %d al cilindro %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Formatita\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Ne formatita\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Muntita\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID (Redundanca Aro de Malmultekostaj Diskoj) md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Retrokonekta(j) dosiero(j): %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Subdisko startata defaýlte\n"
-"    (por MS-DOS starto, ne por \"lilo\")\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivelo %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Grandeco de pecoj %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Retrokonekta dosieronomo: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Grandeco: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrio: %s cilindroj, %s kapoj, %s sektoroj\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Informo: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Subdiskotabelospeco: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "æe buso %d identiga¼o %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Opcioj: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatado de %s malsukcesis"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ne scias kiel formati %s kiel speco %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "muntado malsukcesis"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "muntado malsukcesis: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "eraro dum malmunti %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simpla"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servilo"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Vi ne povas uzi JFS por subdisko pli malgranda ol 16MB"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Vi ne povas uzi ReiserFS por subdisko pli malgranda ol 32MB"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Surmetingoj devas komenci kun antaýa /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Jam estas subdisko kun surmetingo æe %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Æi tiu dosierujo devus resti interne de la radika dosierosistemo (/)"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "Vi bezonas veran dosiersistemon (ext2, reiserfs) por tiu surmetingo\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Eraro dum malfermado de %s por skribi: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Eraro okazis - neniuj validaj aparatoj estis trovata sur kiuj vi povas krei "
-"novajn dosiersistemojn.  Bonvolu kontroli vian ekipa¼on por la kaýzo de æi "
-"tiu problemo."
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Vi ne havas iujn ajn subdiskojn!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Nun vi povas elekti kiujn servojn vi deziras starti kiam vi startas\n"
-"vian komputilon.  Kiam via muso estas supre de ero, malgranda balono\n"
-"ekaperas por helpi vin.  Øi priskribas la rolon de la servo.\n"
-"\n"
-"Zorgegu en æi tiu paþo se vi intencas uzi vian komputilon kiel servilo:\n"
-"ne startu servojn kiujn vi ne deziras uzi."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linukso administras tempon en GMT aý \"Grenviæa Meza Tempo\" kaj "
-"tradukas øin\n"
-"en lokan tempon laý la horzono vi elektis."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Bonvolu elekti la øustan pordon.  Ekzemple, la COM1-a\n"
-"pordo sub MS Vindozo estas nomata ttyS0 sub GNU/Linukso."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (la Linuksa Þargilo) kaj Grub estas startþargiloj: ili povas starti\n"
-"aý GNU/Linukson aý iun ajn mastruman sistemon æeestanta æe via komputilo.\n"
-"Normale, æi tiuj aliaj mastrumaj sistemoj estas øuste detektata kaj\n"
-"instalada.  Se tiel ne estas, vi povas aldoni enskribon mane per æi tiu\n"
-"ekrano.  Zorgu elekti la øustajn parametrojn.\n"
-"\n"
-"\n"
-"Eble vi ankaý ne deziras doni atingon al æi tiuj aliaj mastrumaj sistemoj\n"
-"al iu ajn.  Æiokaze vi povas forstreki la respondajn enskribojn.  Sed\n"
-"æiokaze, vi bezonos startdiskon por starti ilin!"
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Vi bezonas indiki kie vi deziras meti la informon postulata\n"
-"por starti GNU/Linukson.\n"
-"\n"
-"\n"
-"Krom se vi scias precize kion vi faras, elektu \"Unua sektoro de\n"
-"drajvo (MBR)\""
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX provos seræi PCI-a(j)n SCSI-a(j)n adaptilo(j)n\n"
-"Se DrakX trovas SCSI-an adaptilon kaj scias kiun pelilon øi devas uzi\n"
-"øi aýtomate instalos øin (aý ilin).\n"
-"\n"
-"Se vi havas neniom da SCSI-aj adaptiloj, ISA-an SCSI-an adapilon, aý\n"
-"PCI-an SCSI-an adaptilon kiun DrakX ne rekonas DrakX demandos al vi\n"
-"se vi havas SCSI-an adaptilon sur via komputilo.  Se vi ne havas adaptilon\n"
-"vi povas nur klaki 'Ne'.  Se vi klakos 'Jes', DrakX montros al vi liston de\n"
-"peliloj.  Vi povos elekti vian specifan pelilon de la listo.\n"
-"\n"
-"\n"
-"Se vi devas permane elekti vian adaptilon, DrakX demandos\n"
-"æu vi deziras specifi opciojn por øi.  Vi devus permesi al DrakX\n"
-"esplori la aparaton por la opcioj.  Æi tiu kutime bone funkcias.\n"
-"\n"
-"Se ne, vi bezonos provizi opciojn al la pelilo.\n"
-"Reviziu la Instalgvidlibron por sugestoj pri ekstrakado de æi tiu\n"
-"informo de Vindozo (se vi havas øin sur via komputilo),\n"
-"de dokumenta¼o de aparato, aý de la TTT-ejo de la fabrikanto\n"
-"(se vi havas atingon al la reto)."
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Enþovu disketon en drajvo %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Eraro legante dosiero %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Jeso"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Iuj aparatoj sur via komputilo bezonas \"proprietajn\" pelilojn por "
-"funkcii.\n"
-"Vi povas trovi iun informon pri ili æe: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Vi devas havi radikan subdiskon.\n"
-"Por æi tiu, kreu subdiskon (aý klaku estantan).\n"
-"Sekve elektu la agon \"Surmetingo\" kaj faru øin '/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Vi devas havi interþanøan subdiskon"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Vi ne havas interþanøan subdiskon\n"
-"\n"
-"Æu vi deziras daýri tamen?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Vi devas havi interþanøan subdiskon"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Uzu liberan spacon"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Mankas sufiæan da libera spaco por disponigi novajn subdiskojn"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Uzu ekzistantajn subdiskojn"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Ne ekzistas subdiskojn por uzi"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Uzu la Vindoza subdiskon por retrokonektado"
-
-#: ../../install_interactive.pm_.c:98
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kiun subdiskon vi deziras uzi por meti Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Elektu la grandecojn"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Radikosubdiska grandeco en MB: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Interþanøa subdiska grandeco en MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Uzu la liberan spacon sur la Vindoza subdisko"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Kiun subdiskon vi deziras regrandecigi?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Kalkulas Vindozajn dosiersistemajn limojn"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"La regrandecigilo por la FAT (Dosiero-Atingo-Tablo) ne povas trakti\n"
-"vian subdiskon, la sekvanta eraro okazis: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Via Vindoza subdisko estas tro fragmentigata, bonvole uzu ``defrag'' antaýe"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"AVERTO!\n"
-"\n"
-"DrakX nun regrandecigas vian Vindozan subdiskon.  Zorgu: æi tiu operacio "
-"estas\n"
-"danøera.  Se vi ne jam faris øin, vi devus antaýe eliru el la instalado, "
-"uzi\n"
-"\"scandisk\" sub Vindozo (kaj laývole \"defrag\"), kaj sekve relanæu la\n"
-"instaladon.  Ankaý vi devus fari rezervan kopion de via dateno.\n"
-"Kiam vi estas certa, klaku \"Jeso\"."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Kiun grandecon vi deziras teni por Vindozo?"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "subdisko: %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Regrandeciøo de FAT malsukcesis: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ne ekzistas FAT-ajn (Dosiero-Atingo-Tablo) subdiskojn por regrandecigi\n"
-"aý uzi kiel retrokonektaj subdiskoj (aý ne estas sufiæa da spaco)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Forviþu la tutan diskon"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Forigu Vindozon"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Vi havas pli ol unu fiksdisko, sur kiu vi deziras instali Linukson?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Æiuj ekzistantaj subdiskoj kaj iliaj datenoj estos perdata sur drajvo %s"
-
-#: ../../install_interactive.pm_.c:174
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "Uzu ekzistantajn subdiskojn"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Uzu fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Nun vi povas dispartigi %s.\n"
-"Kiam vi finiøos, ne forgesu savi kun `w'."
-
-#: ../../install_interactive.pm_.c:210
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Uzu la liberan spacon sur la Vindoza subdisko"
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Mi ne povas aldoni plu da subdiskoj"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "La Dispartigsoræilo de DrakX trovis æi tiujn solvojn:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Dispartigado malsukcesis: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Startado de la reto"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Haltas de la reto"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Eraro okazis, sed mi ne scias kiel trakti øin bone.\n"
-"Daýri je via propra risko."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duobla surmetingo %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Iuj gravaj paka¼oj ne estis taýge instalata.\n"
-"Aý via KDROM drajvo aý via KDROM disko estas difektita.\n"
-"Kontrolu la KDROM sur instalata komputilo per\n"
-"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bonvenon al %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Neniu disketilo havebla"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Eniras paþon `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Elektu la grandecon kiu vi deziras instali"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Tuta grandeco: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versio: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Grandeco: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Elektu la paka¼ojn kiuj vi deziras instali"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Informo"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Instalu"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Instalanta"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Bonvolu atendi"
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Tempo restanta "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Tuta tempo "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Preparas instaladon"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalanta paka¼o %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Æu vi deziras daýri tamen?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Estis eraro ordigi paka¼ojn:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Uzu ekzistantan konfiguron de X11 (X-fenestroj)?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Via sistemo havas malmulte da risurcoj.  Eble vi havos problemojn pri\n"
-"instali Linuks-Mandrejkon.  Se tio okazos, vi povos anstataý provi tekstan\n"
-"instaladon.  Por æi tio, premu `F1' kiam vi startas de KDROM, kaj sekve\n"
-"tajpu `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Instalklaso"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Bonvole, elektu unu el la sekvantaj specoj de instalado:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "La totala grandeco de la grupoj vi elektis estas proksimume %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Se vi volas instali malpli ol æi tiu grandeco,\n"
-"elektu la procenton el la paka¼oj kiuj vi deziras instali.\n"
-"\n"
-"Malalta procento instalos nur la plej gravajn paka¼ojn;\n"
-"100%% instalos æiujn paka¼ojn."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Vi havas spacon æe via disko por nur %d%% da æi tiuj paka¼oj.\n"
-"\n"
-"Se vi deziras instali malpli ol tiom,\n"
-"elektu la procenton el la paka¼oj kiun vi deziras instali.\n"
-"Malalta procento instalos nur la plej gravajn paka¼ojn;\n"
-"%d%% instalos tiom paka¼ojn kiom eblajn."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Vi povos elekti ilin pli precize en la sekvanta paþo."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procento da paka¼oj por instali"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Elektado de Paka¼aj Grupoj"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Elektado de individuaj paka¼oj"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tuta grandeco: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Malbona paka¼o"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nomo: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Graveco: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Vi ne povas elekti æi tiun paka¼on æar ne estas sufiæe da spaco por instali\n"
-"øin."
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "La sekvaj paka¼oj estos instalataj"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "La sekvaj paka¼oj estos malinstalataj"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Vi ne povas elektu/malelektu æi tiun paka¼on"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Æi tiu estas deviga paka¼o, vi ne povas malelekti øin"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Vi ne povas malelekti æi tiun paka¼on.  Øi estas jam instalita."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Æi tiu paka¼o devus esti promociata.\n"
-"Æu vi certas ke vi deziras malelekti øin?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Vi ne povas malelekti æi tiun paka¼on.  Øi devus esti promociata."
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Þargu/Konservu sur disketo"
-
-#: ../../install_steps_gtk.pm_.c:461
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Elektado de individuaj paka¼oj"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Minimal install"
-msgstr "Eliru instalprogramon"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Taksas"
-
-#: ../../install_steps_gtk.pm_.c:522
-#, fuzzy
-msgid "Please wait, preparing installation"
-msgstr "Preparas instaladon"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d paka¼oj"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Akceptu"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Malakceptu"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Þanøu vian KDROM!\n"
-"\n"
-"Bonvole, enþovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
-"\"\n"
-"kiam vi finos.\n"
-"Se vi ne havas øin, klaku \"Nuligu\" por eviti la instaladon de æi tiu KDROM."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Estis eraro dum instalado de paka¼oj:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Eraro okazis"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Licenca kontrakto"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klavaro"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Bonvole, elektu vian klavaran aranøon."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Kiun instalklaso deziras vi?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Instalu/Øisdatigu"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Æu tiu æi estas instalado aý øisdatigado?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Rekomendata"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Spertulo"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Øisdatigu"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Muspordo"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via muso konektata."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfiguras PCMCIA kartojn..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Konfiguras IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "neniuj haveblaj subdiskoj"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Elektu surmetingojn"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Mi ne povas legi vian subdisktabelon, øi estas tro difektita por mi :(\n"
-"Mi povas peni daýri per blankigi difektitajn subdiskojn (ÆIOM DA DATUMO\n"
-"pereos!).  La alia solvo estas malpermesi al DrakX þanøi la subdisktabelon.\n"
-"(la eraro estas %s)\n"
-"\n"
-"Æu vi konsentas perdi æiujn subdiskojn?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake malsukcesis øuste legi la subdisktabelon.\n"
-"Daýri je via propra risko!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:349
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Elektu la subdiskoj kiuj vi deziras formati"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Radikosubdisko"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Kiu estas la radikosubdisko (/) æe via sistemo?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Vi bezonas restarti por la þanøoj al la subdisktabelo efektivigi"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Elektu la subdiskoj kiuj vi deziras formati"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Æu kontrolas malbonajn blokojn?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Formatas subdiskojn"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Kreas kaj formatas dosieron %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nesufiæa interþanøospaco por plenumi instalado, bonvolu aldoni iom"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Seræas haveblajn paka¼ojn"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Trovadas paka¼ojn por promocii"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Via komputilo ne havas sufiæe da spaco por instalado aý promocio (%d > %d)."
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Kompleta (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimuma (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Rekomendata (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Akomodata"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Þargu de disketo"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Þargas de disketo"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Elektado de Paka¼oj"
-
-#: ../../install_steps_interactive.pm_.c:532
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Enþovu disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Konservu sur disketo"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se vi havas æiujn de la KDROM-oj en la listo sube, klaku \"Jes\".\n"
-"Se vi havas neniujn de æi tiuj KDROM-oj, klaku \"Nuligu\".\n"
-"Se vi mankas nur iujn de la KDROM-oj, malelektu ilin, kaj poste klaku \"Jes"
-"\"."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "KDROM etikedata \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalas paka¼o %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Post-instala konfigurado"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Enþovu disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Enþovu malplenan disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Nun vi havas la þancon elþuti softvaron por æifrado.\n"
-"\n"
-"AVERTO:\n"
-"\n"
-"Pro malsamaj øeneralaj kondiæoj aplikeblaj al æi tiu softvaro kaj trudata\n"
-"de diversaj jurisdikcioj, la kliento kaj/aý fina uzanto de tiu softvaro\n"
-"devus certigi ke la leøoj de lia/ilia jurisdikcio permesas li/ili elþuti,\n"
-"stoki kaj/aý uzi tiun softvaron.\n"
-"\n"
-"Plue, la kliento kaj/aý fina uzanto scios specife atentos ne malobei la\n"
-"leøojn de lia/ilia jurisdikcio.  Se la kliento kaj/aý la fina uzanto\n"
-"malobeas tiujn aplikeblajn leøojn, li/ili altiros sur sin gravajn "
-"sankciojn.\n"
-"\n"
-"Neniuokaze aý Mandrakesoft aý øiaj fabrikistoj responsigos por specialaj,\n"
-"nerektaj aý hazardaj reparacioj kiuj ajn (inkluzive, sed ne limigite al\n"
-"perdo de profitoj, interrompo de komerco, perdo de komerca dateno kaj\n"
-"aliaj monaj malprofitoj, kaj rezultaj þuldoj kaj indemizo pagenda konforme\n"
-"al prijuøo) rezulte el uzado, posedado, aý sole elþutado de tiu softvaro, "
-"al\n"
-"kiu la kliento kaj/aý fina uzanto ne povis atingi post subskribi la nunan\n"
-"kontrakton.\n"
-"\n"
-"Por iuj demandoj rilate al tiu kontrakto, bonvole demandu de\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Elektu spegulon de kiu havigi la paka¼ojn"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Kontaktu la spegulon por havigi la liston de havebla paka¼oj"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Bonvole, elektu la paka¼ojn kiujn vi deziras instali."
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "kio estas vian horzonon?"
-
-#: ../../install_steps_interactive.pm_.c:813
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Æu via hardvara horloøo estas øustigata en GMT?"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "NTP Servilo"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Malproksima CUPS-a servilo"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Neniu printilo"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Muso"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Printilo"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDN-karto"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Sonkarto"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Lokaj dosieroj"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Difinu pasvorton de root"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Neniu pasvorto"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Æi tiu pasvorto ests tro simpla (øi devas esti almenaý %d signoj longa)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Aýtentikigado"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "Aýtentikiga LDAP"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "LDAP Servilo"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "Aýtentikiga NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS Domajno"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS Servilo"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Akomodita startdisketo provizas manieron de starti via Linuksa sistemo\n"
-"sendepende de la normala startþargilo.  Æi tiu estas utila se vi ne deziras\n"
-"instali SILO sur via sistemo, aý alia mastruma sistemo forigas SILO,\n"
-"aý SILO ne funkcias kun via aparato-konfigura¼o.  Akomodita startdisketo "
-"ankaý\n"
-"povas esti uzata kun la Mandrejka savdisko, kiu plifaciligas resaniøi de\n"
-"severaj sistemaj paneoj.\n"
-"\n"
-"Se vi deziras krei startdisketon por via sistemo, enþovu disketon en la\n"
-"unua drajvo kaj klaku \"JES\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Unua disketa drajvo"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Dua disketa drajvo"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Ellasu"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Akomodita startdisketo provizas manieron de starti via Linuksa sistemo\n"
-"sendepende de la normala startþargilo.  Æi tiu estas utila se vi ne deziras\n"
-"instali LILO (aý grub) sur via sistemo, aý alia mastruma sistemo forigas "
-"LILO,\n"
-"aý LILO ne funkcias kun via komputilo.  Akomodita startdisketo ankaý povas\n"
-"esti uzata kun la Mandrejka savdisko, kiu plifaciligas resaniøi de severaj\n"
-"sistemaj paneoj.  Æu vi deziras krei startdisketo por via sistemo?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Bedaýrinde, neniu disketdrajvo havebla"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Elektu la disketdrajvo vi deziras uzi por krei la startdisketon"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Enþovu disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Kreas startdisketon"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Preparas startþargilon"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Æu vi deziras uzi aboot-on?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Eraro daýre mi instalis \"aboot\",\n"
-"Æu mi devus provi perforte instali eæ se tio detruas la unuan subdiskon?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Instalu restart-þargilon"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalado de startþargilo malsukcesis.  La sekvanta eraro okazis:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Malalta"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Meza"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Alta"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Elektu sekurnivelon?"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Enþovu malplenan disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Kreas aýtoinstalan disketon"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Kreu aýtoinstalan disketon"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Aýtomata"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Reludu"
-
-#: ../../install_steps_interactive.pm_.c:1182
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Elektado de individuaj paka¼oj"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Linuks-Mandrejka Instalado %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr "  <Tabo>/<Alt-Tabo> inter eroj | <Spaco> elektas | <F12> sekva ekrano "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu mankas"
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "Elektu agon"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Bonvole atendu"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Etendu Arbon"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Maletendu Arbon"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Þanøu inter ebena kaj ordigita je grupoj"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Ambigueco (%s), esti pli preciza\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Malbona elekta¼o, provu denove\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (defaýlto estas %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Via elekta¼o? (defaýlo estas %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Via elekta¼o (defaýlto estas %s  enigu `neniu' por elekti neniu) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Æe¶a (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Germana"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak-a"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Hispana"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Finna"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Franca"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norvega"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Pola"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Rusa"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Sveda"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Unuiøinta Regna klavaro"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "Usona klavaro"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Albana"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armena (malnova)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armena (skribmaþina)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armena (fonetika)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbajøana (latina)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulgara"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazila (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Belarusa"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Svisa (germana aranøo)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Svisa (franca aranøo)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Æe¶a (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Germana (neniom da mortaj klavoj)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Dana"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak-a (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak-a (Norvega)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estona"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Kartvela (\"Rusa\" aranøo)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Kartvela (\"Latina\" aranøo)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Greka"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Hungara"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Kroata"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Israela"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Israela (fonetika)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Irana"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islanda"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Itala"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japana 106 klavoj"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Korea klavaro"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latinamerika"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litova AZERTY-a (malnova)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litova AZERTY-a (nova)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litova \"numero-vica\" QWERTY-a"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litova \"fonetika\" QWERTY-a"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "Loko"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Macedona"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Nederlanda"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Pola (qwerty aranøo)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Pola (qwertz aranøo)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugala"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Kebeka)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Rumana (qwertz-a)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Rumana (qwerty-a)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Rusa (Yawerty-a)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Slovena"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaka (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbajøana (cirila)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Taja klavaro"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Taja klavaro"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turka (tradicia \"F\" modelo)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turka (moderna \"Q\" modelo)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukrajna"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "Usona klavaro (internacia)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vjetnama \"numero-vica\" QWERTY-a"
-
-#: ../../keyboard.pm_.c:240
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslava (latina/cirila)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cirklaj surmetingoj %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Muso"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Laýnorma"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Loøiteka MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Nespecifa PS2 RadoMuso"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 butona"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Genera"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Rado"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "seria"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Nespecifa 2 Butona Muso"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Nespecifa 3 Butona Muso"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Mikrosofta IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Loøiteka MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Loøiteka CC serio"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Loøiteka MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Serio"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Loøiteka Muso (seria, malnova C7 speco)"
-
-#: ../../mouse.pm_.c:65
-#, fuzzy
-msgid "busmouse"
-msgstr "Neniu Muso"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 butonoj"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 butonoj"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "neniu"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Neniu Muso"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Bonvole, provu la muson"
-
-#: ../../mouse.pm_.c:483
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "Bonvole, provu la muson"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVU VIAN RADON!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Finu"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Sekvanta ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Antaýa"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Æu tio æi pravas?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Konektu al la Interreto"
-
-#: ../../network/adsl.pm_.c:20
-#, fuzzy
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"La plej ofte uzata maniero por konekti kun ADSL estas dhcp + pppoe.\n"
-"Tamen, ekzistas konektojn kiuj nur uzas dhcp.\n"
-"Se vi ne scias, elektu 'uzu pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "uzu dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "uzu pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "uzu pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Kiun dhcp-an klienton vi deziras uzi?\n"
-"La defaýlto estas dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-#, fuzzy
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Mi ne detektas eterretan retadaptilom sur via sistemo.  Bonvole lanæu la\n"
-"aparatokonfigurilon."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Elektu la retan interfacon"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Bonvole elektu kiun retadaptilon vi deziras uzi por konekti al la interreto"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "neniu retkarto trovita"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Konfiguras reto"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Bonvole enigu vian poþtejon se vi scias øin.\n"
-"Iuj DHCP-aj serviloj bezonas poþtejon por funkcii.\n"
-"Via poþtejo devus esti plene specifita poþtejo,\n"
-"ekzemple ``miakomputilo.mialaborejo.miafirmao.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Poþtejo"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "ISDN-a Konfigura¼on"
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "Interna ISDN-karto"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interna ISDN-karto"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Kia estas via ISDN-a konekta¼o?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Konfigura¼o de barilo detektata!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Konfigura¼o de barilo detektata!"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN-a Konfigura¼on"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Elektu vian interretprovizanton.\n"
-" Se øin ne estas en la listo, elektu Nelistiøitan"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protokolo"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Eýropo (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "La cetero de la mondo"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"La cetero de la mondo \n"
-" neniom da D-Kanelo (lukontraktataj lineoj)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Kiun protokolon vi deziras uzi?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Kiun specon de karto vi havas?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Mi ne scias"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Se via havas ISA-an karton, la valoro sur la sekvanta ekrano devus esti "
-"øusta.\n"
-"\n"
-"Se vi havas PCMCIA-an karton, vi bezonas scii la IRQ-o kaj I/O (Eneligo)\n"
-"por via karto.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Æesigu"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Æu mi devus daýri?"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Kiu estas via ISDN-a karto?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Mi detektis ISDN-an PCI-an Karton, sed mi ne scias la specon.  Bonvole "
-"elektu\n"
-"unu el la PCI-aj kartojn sur la sekvanta ekrano."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Neniu ISDN-a PCI-a karto trovata.  Bonvole elektu unu el la PCI-aj kartojn "
-"sur\n"
-"la sekvanta ekrano."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Telefon-konektaj opcioj"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Nomo de konekto"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Telefonnumero"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Salutnomo"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP (Pasvorta Aýtentikigada Protokolo)"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Programeto-bazata"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Finaparato-bazata"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Domajna nomo"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Unu DNS-a Servilo (nedeviga)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Du DNS-a Servilo (nedeviga)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Konfiguru interretan konekta¼on"
-
-#: ../../network/netconnect.pm_.c:33
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Kiel vi deziras konekti al la Interreto?"
-
-#: ../../network/netconnect.pm_.c:36
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr "Konektu al la Interreto / Konfiguru lokan Reton"
-
-#: ../../network/netconnect.pm_.c:36
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "Kiel vi deziras konekti al la Interreto?"
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Konektu al la Interreto"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Malkonektu el la Interreto"
-
-#: ../../network/netconnect.pm_.c:44
-#, fuzzy
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Konfiguru interretan konekta¼on"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Interreta konekta¼o kaj konfiguro"
-
-#: ../../network/netconnect.pm_.c:96
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Konfiguru interretan konekta¼on"
-
-#: ../../network/netconnect.pm_.c:105
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr "Konfiguru interretan konekta¼on"
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Reta Konfigura¼o"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:157
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Elektu la defaýltan uzulon:"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Detektas aparatojn..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "Konfiguru interretan konekta¼on"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Duobla surmetingo %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Konfiguru interretan konekta¼on"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, fuzzy
-msgid "ADSL connection"
-msgstr "LAN Konfigura¼o"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, fuzzy, c-format
-msgid "detected on interface %s"
-msgstr "Reta interfaco"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-#, fuzzy
-msgid "Cable connection"
-msgstr "Konfiguru interretan konekta¼on"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Konfiguru interretan konekta¼on"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "LAN Konfigura¼o"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:190
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Elektu la ilon kiun vi deziras instali"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:215
-#, fuzzy
-msgid "Internet connection"
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Æu vi deziras starti vian konekta¼on je startado de la sistemo?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Reta Konfigura¼o"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-
-#: ../../network/network.pm_.c:283
-#, fuzzy
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"AVERTO: Æi tiu aparato estis antaýe konfigurata por konekti al la "
-"Interreto.\n"
-"Simple klaki JES por teni la konfiguron de æi tiu aparato.\n"
-"Se vi modifos la subajn kampojn, vi þanøos æi tiun konfiguron."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Bonvole enigu la IP-an konfigurâjon por æi tiu komputilo.\n"
-"Æiu ero devus esti enigata kiel IP-adreson en punktita-decimala notacio\n"
-"(ekzemple, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfiguras retan aparaton %s"
-
-#: ../../network/network.pm_.c:298
-#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr "XFree86 pelilo: %s\n"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP-adreso"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Retmasko"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Aýtomata IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adreso devus esti en la notacio 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Bonvole enigu vian poþtejon.\n"
-"Via poþtejo devus esti plene specifita poþtejo,\n"
-"ekzemple ``miakomputilo.mialaborejo.miafirmao.com''.\n"
-"Vi ankaý povas enigi la IP-adreson de la prokura kluzo se via havas unu."
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNA servilo"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Kluzo"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Prokura kluzaparato"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Konfigurado de prokuraj serviloj"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP prokura servilo"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP prokura servilo"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Prokura servilo devus esti http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Prokura servilo devus esti ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Æu vi deziras provi konekti al la interreto nun?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "Konfiguru interretan konekta¼on"
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "Kiel vi deziras konekti al la Interreto?"
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr "Konektu al la Interreto / Konfiguru lokan Reton"
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Konfigurado de Konekto"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Bonvole plenigu aý marku la suban kampon"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ de Karto"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Memoro de Karto (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "I/O (Eneligo) de Karto"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "I/O 0 (Eneligo 0) de Karto"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "I/O 1 (Eneligo 1) de Karto"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Via persona telefonnumero"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Nomo de interretprovizanto (ekz-e provizanto.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Telefonnumero de interretprovizanto"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "Provizanto DNS 1 (nedeviga)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "Provizanto DNS 2 (nedeviga)"
-
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "Elektu vian klavaron"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Diskuma modalo"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-#, fuzzy
-msgid "Connection speed"
-msgstr "Speco de konekto"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Speco de konekto"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Konta Salutnomo (uzula nomo)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Konta Pasvorto"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Æi tiu platformo ne subtenas etendatajn subdiskojn"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Vi havas truon en via subdisktabelo sed mi ne povas uzi øin.\n"
-"La sola solvo estas movi viajn æefajn subdiskojn por situigi la truon\n"
-"apud la etendataj subdiskoj."
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restaýris el dosiero %s malsukcesis: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Eraro skribante al dosiero %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "havenda"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "grava(j)"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "tre agrabla(j)"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "agrabla(j)"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "elbe"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Loka printilo"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Malproksima printilo"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Malproksima CUPS-a servilo"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Malproksimaj lpd servilo"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Reta Printilo (ingo)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Vindozo 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Printservilo"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Printila Aparato URI"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modulo %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Elektu Printilan Konekton"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kiel estas la printilo konektata?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"Kun malproksima CUPS servilo, vi ne devas konfiguri iun printilon\n"
-"æi tie; printiloj estos aýtomate dektektataj.  Se vi havas dubojn,\n"
-"elektu \"Malproksima CUPS servilo\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-#, fuzzy
-msgid "None"
-msgstr "Finata"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Elektu la defaýltan uzulon:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Malfermu"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-adreso devus esti en la notacio 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "Loka printilo"
-
-#: ../../printerdrake.pm_.c:146
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "IP de SMB servilo"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Pordo"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Post-instala konfigurado"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Detektas aparatojn..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Provu pordojn"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Printilo, tipo \"%s\", estas detektita æe "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Loka Printila Aparato"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Al kiu aparato estas via printilo konektata\n"
-"(notu ke /dev/lp0 egalas LPT1:)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Printila Aparato"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Malproksimaj lpd Printilaj Opcioj"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Por uzi malproksima lpd printvico, vi devas provizi la poþtejon de la\n"
-"printservilo kaj la printviconomon æe tiu servilo en kiun taskoj devus\n"
-"esti metata."
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "Malproksima poþtejo"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:320
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Malproksima poþtejo"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Malproksima poþtejo"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Vindozo 9x/NT) Printilaj Opcioj"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Por printi al SMB-a printilo, vi devas provizi la SMB poþtejon (Notu! Øi "
-"eble\n"
-"estas malsama de øia TCP/IP nomo!) kaj eble la IP-adreson de la "
-"printservilo,\n"
-"aldone al la opuzan nomon de la printilo vi deziras atingi kaj iun ajn\n"
-"taýgan salutnomon, pasvorton, kaj laborgrupan informon."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "Poþtejo de SMB servilo"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "IP de SMB servilo"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Opuza nomo"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Laborgrupo"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "NetWare Printilaj Opcioj"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Por print al NetWare printilo, vi devas provizi la NetWare printservilan\n"
-"nomon (Notu! Øi eble estas malsama de øia TCP/IP nomo!) aldone al la\n"
-"printvican nomon por la printilo vi deziras atingi kaj iun ajn taýgan\n"
-"salutnomon kaj pasvorton."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Printservilo"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Printvica Nomo"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Ing-Printilaj Opcioj"
-
-#: ../../printerdrake.pm_.c:528
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Por printi al inga printilo, vi bezonas provizi la\n"
-"poþtejon de la printilo kaj opcie la pordnumeron."
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "Printilaj Poþtejo"
-
-#: ../../printerdrake.pm_.c:537
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Printilaj Poþtejo"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Printila Aparato URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Nomo de printilo"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Priskribo"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Loko"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:793
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Printilan Konekton"
-
-#: ../../printerdrake.pm_.c:794
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Kiun specon de printilo vi havas?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Æu vi deziras provi printado?"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "Provu pordojn"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-#, fuzzy
-msgid "No test pages"
-msgstr "Jes, printu ambaý de la provpaøojn"
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "Printilo"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "Laýnorma"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Printas provpaøo(j)n..."
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "Printas provpaøo(j)n..."
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Printas provpaøo(j)n..."
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Provpaøo(j)n estis sendataj al la printila demono.\n"
-"Æi tiu eble postulas iom da tempo antaý ol la printilo komencas.\n"
-"Printada stato:\n"
-"%s\n"
-"\n"
-"Æu øi øuste funkcias?"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Provpaøo(j)n estis sendataj al la printila demono.\n"
-"Æi tiu eble postulas iom da tempo antaý ol la printilo komencas.\n"
-"Æu øi øuste funkcias?"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Neniu printilo"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Haltas de la reto"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "Printilaj opcioj"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "Neniu printilo"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Startas vian konekta¼on..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Konfiguru retumon"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Ekrano ne estas konfigurata"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Konfiguras reto"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Kiun printsistemo vi deziras uzi?"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Alta"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoja"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Kiun printsistemo vi deziras uzi?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Elektu Printilan Konekton"
-
-#: ../../printerdrake.pm_.c:1728
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Kiun printsistemo vi deziras uzi?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfiguru Printilon"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Printilaj opcioj"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:1845
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Æu vi deziras konfiguri printilon?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Normala Modalo"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Defaýlta)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Malproksima CUPS-a servilo"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "Malproksima CUPS-a servilo"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-#, fuzzy
-msgid "Add printer"
-msgstr "Neniu printilo"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Printilan Konekton"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "Printas provpaøo(j)n..."
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Konfigurado de prokuraj serviloj"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "porto"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Prokura servilo devus esti http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Prokura servilo devus esti ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Aýtomata-enregistrado"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "pasvorto"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Neniu pasvorto"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "La pasvortoj ne egalas.  Provu denove!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ne povas aldoni subdiskon al _formatita_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ne povas skribi dosieron %s."
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid malsukcesis"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid malsukcesis (eble raidtools mankas)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ne estas sufiæaj subdiskoj por RAID nivelo %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, perioda ordonvicigilo."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd estas uzata por monitori la bateriostaton kaj registri øin en la\n"
-"sistemlogdosiero (syslog).  Vi ankaý povas uzi øin por halti la komputilon\n"
-"kiam la baterioþargo estas malgranda."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Lanæas ordonojn vicigitajn per la 'at' ordono je la horo specifita kiam\n"
-"'at' estis uzata, kaj lanæas baæajn ordonojn kiam la þargmezo estas\n"
-"sufiæe malgranda."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron estas norma Uniksa programo kiu lanæas programojn kiujn la uzulo\n"
-"specifas je periodaj tempoj.  vixie cron aldonas kelkajn trajtojn al la\n"
-"baza Uniksa cron, inkluzive de pli bona sekureco kaj pli fortaj\n"
-"konfiguraj opcioj."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM aldonas subtenon por musoj al teksta-reøimaj Linuksaj aplikoj ekzemple\n"
-"la 'Midnight Commander' (Meznokta Estro).  Ankaý øi permesas uzi la muson\n"
-"por transpoþigi æe la konzolo (Sen X Fenestroj)."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache estas Tut-Tera Teksa¼a servilo.  Øi liveras HTML-ajn dosierojn\n"
-"kaj CGI (komunakluza interfaco)."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"La interreta superservila demono (kutime nomata inetd) lanæas sortimenton\n"
-"da aliaj interretaj servoj laýbezone.  Øi respondas por la lanæo de multaj\n"
-"servoj, inkluzive de telnet, ftp, rsh, kaj rlogin.  Se vi malþaltas inetd,\n"
-"ve malþaltas æiujn el la servoj por kiuj øi respondas."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Æi tiu paka¼o þargas la elektitan klavarmapon laý /etc/sysconfig/keyboard.\n"
-"Vi povas elekti æi tion per la kbdconfig utilprogramo.  Vi lasus æi tion\n"
-"ebligatan por la plejmulto da sistemoj."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd estas la printvica dajmono bezonata por lpr taýge funkcii.  Øi estas\n"
-"baze servilo kiu arbitracias printajn taskojn al printilo(j)."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"'named' (BIND) estas Domajna NomServilo (DNS) kiun vi uzas por trovi\n"
-"poþtejojn de IP adresoj."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Muntas kaj malmuntas æiujn RetDosierSistemajn (NFS), SMB (Lan\n"
-"Manager/Vindozaj), kaj NCP (NetWare) surmetingojn."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Þaltas/Malþaltas æiujn retajn interfacojn konfiguratajn por lanæi\n"
-"dum sistemstartado."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
-"Æi tiu servo provizas NFS dosierþlosado, kiun vi konfiguras per la\n"
-"/etc/exports dosiero."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
-"Æi tiu servo provizas NFS dosierþlosado."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA subteno kutime estas subteno de a¼o kiel ethernet kaj modemoj en\n"
-"tekkomputiloj.  Øi ne estos lanæata krom se vi konfiguras øi por ke øi\n"
-"estu sendanøera æe komputiloj kiuj ne bezonas øin."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"La pordmapilo direktas RPC konektojn, kiujn protokoloj kiel NFS kaj NIS "
-"uzas.\n"
-"La pordmapservilo devas esti uzata æe komputiloj kiuj agas kiel serviloj\n"
-"por protokoloj kiuj uzas la RPC mekanismon."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"\"Postfix\" estas PoþtTransportPerilo, kiu estas la programo kiu movas\n"
-"retpoþton de unu komputilo al alia."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Savas kaj restaýras sisteman entropikomuna¼on por pli altkvalita\n"
-"generado de aleatoraj nombroj."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"La routed dajmono permesas aýtomatan øisdatigon de la IP enkursigila tabelo\n"
-"per la RIP protokolo.  Kvankam RIP estas vaste uzata je malgrandaj retoj,\n"
-"pli malsimplaj enkursigaj protokoloj estas bezonataj por malsimplaj retoj."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"La rstat protokolo permesas al uzuloj sur reto ekstrakti metrikojn\n"
-"pri la rapideco de iu ajn komputilo sur tiu reto."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"La ruser protokolo permesas al uzuloj sur reto identigi kiujn estas\n"
-"konektataj æe aliaj respondantaj komputiloj."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"La rwho protokolo permesas al uzuloj havigi liston de æiuj el la uzuloj\n"
-"konektataj æe komputilo kiu estas uzanta la rwho dajmono (simila al finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog (sistemlogilo) estas la rimedo per kiu multaj dajmonoj registras\n"
-"mesaøojn al diversaj sistemlogdosieroj.  Øi estas bona ideo æiam uzi\n"
-"syslog."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:88
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Startas kaj æesigas la X Tiparan Servilon je starttempo kaj æesiga tempo."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "Printilo"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Interreto"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "Sistema modalo"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Malproksimaj lpd Printilaj Opcioj"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Datumbazoj"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "Servilo"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Averto"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Alfiksu"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Yaboot"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instalanta paka¼o %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Mi ne povas legi vian subdisktabelon, øi estas tro difektita por mi :(\n"
-"Mi penos daýri per blankigi difektitajn subdiskojn"
-
-#: ../../standalone/drakautoinst_.c:44
-#, fuzzy
-msgid "Error!"
-msgstr "Eraro"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Post-instala konfigurado"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Post-instala konfigurado"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Gratulojn!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-
-#: ../../standalone/drakgw_.c:120
-#, fuzzy
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "malebligu"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "forsendu"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "rekonfiguru"
-
-#: ../../standalone/drakgw_.c:127
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "Detektas aparatojn..."
-
-#: ../../standalone/drakgw_.c:135
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
-
-#: ../../standalone/drakgw_.c:145
-#, fuzzy
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "ebligu"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:161
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-
-#: ../../standalone/drakgw_.c:182
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Nun kiam via Interreta konekto estas konfigurata,\n"
-"vi povas konfiguri vian komputilon por disdividi øian Interretan konekton.\n"
-"Notu: vi bezonas dediæan Retadaptilon por konfiguri Lokan Reton (LAN).\n"
-"\n"
-"Æu vi deziras konfiguri Disdividadon de Interreta Konekto?\n"
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Interfaco %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Mi ne detektas eterretan retadaptilom sur via sistemo.  Bonvole lanæu la\n"
-"aparatokonfigurilon."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Reta interfaco"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Ekzitas nur unu konfigurita retadaptilo sur via sistemo:\n"
-"\n"
-"%s\n"
-"\n"
-"Æu vi deziras konfiguri vian Lokan Reton (LAN) kun æi tiu adaptilo?"
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Bonvole elektu kiun retadaptilon estos konektata al via Loka Reto (LAN)."
-
-#: ../../standalone/drakgw_.c:243
-#, fuzzy
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Averto, la retadaptilo estas jam konfigurata.\n"
-"Æu vi deziras rekonfiguri øin?"
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Ebla konflikto pri Loka-Reta adreso trovata en nuna konfiguro de %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Konfigura¼o de barilo detektata!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Averto.  Ekzistanta konfigura¼o de barilo detektata.  Vi eble devas permane\n"
-"fiksi øin poste de la instalado."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Mi konfiguras..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Mi konfiguras komandodosierojn, instalas programojn, startas servilojn..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemoj instalante paka¼on %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:617
-#, fuzzy
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: ../../standalone/drakgw_.c:618
-#, fuzzy
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: ../../standalone/drakgw_.c:619
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-
-#: ../../standalone/drakgw_.c:624
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Interreta konekta¼o kaj konfiguro"
-
-#: ../../standalone/drakgw_.c:631
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../standalone/draknet_.c:79
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ISDN-a Konfigura¼on"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-#, fuzzy
-msgid "Profile: "
-msgstr "muntado malsukcesis: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Poþtejo: "
-
-#: ../../standalone/draknet_.c:167
-#, fuzzy
-msgid "Internet access"
-msgstr "Interreto"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Speco:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Kluzo:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-#, fuzzy
-msgid "Interface:"
-msgstr "Interreto"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Stato:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Konektita"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Ne konektita"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Konektu..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Malkonektu..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Startas vian konekta¼on..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Fermas vian konekta¼on..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "The system is now disconnected."
-msgstr "Kiel vi deziras konekti al la Interreto?"
-
-#: ../../standalone/draknet_.c:243
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Konfiguru servojn"
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "LAN Konfigura¼o"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Pelilo"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Interfaco"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protokolo"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "State"
-msgstr "Stato:"
-
-#: ../../standalone/draknet_.c:267
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Konfiguru lokan reton"
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Apliku"
-
-#: ../../standalone/draknet_.c:325
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Provu konfigura¼on"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "LAN Konfigura¼o"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptilo %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "activate now"
-msgstr "Aktiva"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "desactivate now"
-msgstr "Aktiva"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:562
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Interreta konekta¼o kaj konfiguro"
-
-#: ../../standalone/draknet_.c:566
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Interreta konekta¼o kaj konfiguro"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Speco de konekto"
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Bonvenon Al Rompistoj"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Malbona"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoja"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"vi devus uzi æi tiun nivelon zorge. Øi faras vian komputilon pli facila\n"
-"por uzi, sed delikatega: vi devus neniam uzi øi surrete.\n"
-"Øi ne havas pasvortojn."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Pasvortoj nun estas ebligataj, sed uzado kiel reta komputilo estas ankoraý\n"
-"ne rekomendita."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Malmultaj plibonigoj æe æi tiu sekurnivelo, la æefa estas ke øi havas pli\n"
-"multajn sekurecajn avertojn kaj kontrolojn."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Æi tiu estas la normala sekureco rekomendata por komputilo kiu estos uzata\n"
-"por konekti al la Interreto kiel kliento.  Nun estas sekurecaj kontroloj."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Kun æi tiu sekurnivelo, uzado de æi tiu komputilo kiel servilo ebliøas.\n"
-"La sekureco nun estas sufiæe alta por uzi la sistemon kiel servilo kiu\n"
-"akceptas konektojn de multaj klientoj."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Ni uzas aspektojn de la kvara nivelo, sed nun la komputilo estas tute\n"
-"malfermita.  Sekurecaj aspektoj estas æe iliaj maksimumoj."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "Elektas sekurnivelon"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Elektu opciojn por servilo"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Elektas sekurnivelon"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Konekti al la interreto"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Elektu la ilon kiun vi deziras instali"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uzado: keyboarddrake [--expert] [klavaro]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Þanøu KD-ROM-on"
-
-#: ../../standalone/livedrake_.c:24
-#, fuzzy
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Þanøu vian KDROM!\n"
-"\n"
-"Bonvole, enþovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
-"\"\n"
-"kiam vi finos.\n"
-"Se vi ne havas øin, klaku \"Nuligu\" por eviti la instaladon de æi tiu KDROM."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "neniu serial_usb (seria USB) trovita\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Æu vi deziras emuli trian musbutonon?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Konfigura¼o de barilo"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Konfigura¼o de barilo"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Elektu vian lingvon"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Elektu instalklason"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detektado de fiksdisko(j)"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfiguru muson"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Elektu vian klavaron"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr ""
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Dosiersistemo konfiguro"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatu subdiskojn"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Elektu paka¼ojn"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalu sistemon"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Aldonu uzulon"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfiguru retumon"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfiguru servojn"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Kreu praþargdisketon"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Instalu restart-þargilon"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfiguru X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Eliru instalprogramon"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ne povis malfermi %s por skribi: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "TTT/FTP"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Reta Printilo (ingo)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Oficejo"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnoma Laborstacio"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Laborstacio"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE Laborstacio"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Plurmedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Database"
-msgstr "Datumbazoj"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Plurmedia - Sono"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentaro"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Interreta Konfigurado"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Plurmedia - Sono"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN Konfigura¼o"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Development"
-msgstr "Programisto"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "Laborstacio"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C kaj C++ programadaj bibliotekoj, programoj kaj æapdosieroj"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Reta Printilo (ingo)"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Dokumentaro"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Plurmedia - Grafiko"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Interreto"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Redaktiloj, þeloj, dosieriloj, terminaloj"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Ludoj"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Plurmedia - KD-ROM Kreado"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Laborstacio"
-
-#, fuzzy
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Æu vi konsentas?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Krom se vi scias precize alie, la kutima elekto estas \"/dev/hda\"\n"
-#~ " (unua æefa IDE-a disko) aý \"/dev/sda\" (unua SCSI-a disko)."
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Jen la sekvantaj printvicoj.\n"
-#~ "Vi povas aldoni pli aý þanøi la ekzistantajn."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Speco de konekto"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Elektu la defaýltan uzulon:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Bonvole, provu la muson"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "Bonvole elektu vian preferatan lingvon por instalado kaj sistema uzado."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Elektu la aranøon de via klavaro el la listo supre"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Elektu:\n"
-#~ "\n"
-#~ "  - Akomodata: Se vi sufiæe konas GNU/Linukson, vi povas elektu la æefan\n"
-#~ "    uzadon por via komputilo.  Vidu malantaýe por detaloj.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Spertulo: Æi tio supoza ke vi flue konas GNU/Linukson kaj deziras "
-#~ "fari\n"
-#~ "    treege akomodatan instaladon.  Simile kiel \"Akomodata\" instalado, "
-#~ "vi povos\n"
-#~ "    elekti la uzado por via komputilo.\n"
-#~ "    Sed bonvolege, NE ELEKTU ÆI TION KROM SE VI SCIAS KION VI FARAS!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Nun vi devas elekti la uzadon por via komputilo.  Jen la elektoj:\n"
-#~ "\n"
-#~ "* Laborstacio: æi tio estas la ideala opcio se vi intencas uzi vian\n"
-#~ "  komputilon æefe por æiutaga uzado æe la oficejo aý hejme.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Programado: se vi intencas uzi vian komputilon æefe por programado,\n"
-#~ "  æi tio estas bona opcio.  Vi havos plenan aron de programiloj por\n"
-#~ "  kompili, erarseræi, formati programfontojn, kaj krei\n"
-#~ "  programpaka¼ojn.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Servilo: se vi intencas uzi æi tiun komputilon kiel servilo, æi tio\n"
-#~ "  estas bona opcio.  Aý dosierservilo (NFS aý SMB), printservilo\n"
-#~ "  (Uniksa stilo aý Mikrosofta Vindoza stilo), aýtentikada servilo\n"
-#~ "  (NIS), aý datumbaza servilo, ktp.  Kiel tia, ne atendu umojn (KDE,\n"
-#~ "  GNOME, ktp.) estas instalotaj."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Nun vi povas elekti la paka¼aron kiun vi deziras instali aý promocii.\n"
-#~ "\n"
-#~ "Tiam DrakX kontrolos æu vi havas sufiæe da spaco por instali æiujn de "
-#~ "ili.\n"
-#~ "Se ne, øi informas vin pir øi.  Se vi deziras antaýeniri malgraýe, øi\n"
-#~ "antaýeniros je la instalado de æiuj de la elektitaj paka¼aroj sed lasos\n"
-#~ "fali iujn paka¼ojn kiujn estas malpli interesaj.  Suben de la listo vi\n"
-#~ "povas elekti la opcion \"Elektado de apartaj paka¼oj\"; æiokaze vi devus\n"
-#~ "foliumi tra pli ol 1000 paka¼oj..."
-
-#, fuzzy
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Se vi havas æiujn de la KDROM-oj en la listo sube, klaku \"Jes\".\n"
-#~ "Se vi havas neniujn de æi tiuj KDROM-oj, klaku \"Nuligu\".\n"
-#~ "Se vi mankas nur iujn de la KDROM-oj, malelektu ilin, kaj poste klaku "
-#~ "\"Jes\"."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Nun vi povas enigi telefon-konektajn opciojn.  Se vi ne estas certa kio "
-#~ "enigi,\n"
-#~ "vi povas havigi la øustan informon de via interretprovizanto."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Enigu:\n"
-#~ "\n"
-#~ "  - IP-adreson: Se vi ne scias, demandu al via retadministranto.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Retmaskon: \"255.255.255.0\" øenerale estas bona elekta¼o.  Se vi ne\n"
-#~ "estas certa, demandu al via retadministranto aý interretprovizanto.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Aýtomata IP-adreson: Se via reto uzas BOOTP-an aý DHCP-an "
-#~ "protokolon,\n"
-#~ "elektu æi tiun opcion.  Se elektita, neniu valoro estas bezonata en\n"
-#~ "\"IP-adreson\".  Se vi ne estas certa, demandu al via retadministranto\n"
-#~ "aý interretprovizanto.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Se via reto uzas NIS, elektu \"Uzu NIS\".  Se vi ne scias, demandu al "
-#~ "via\n"
-#~ "retadministranto."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Nun vi povas enigi telefon-konektajn opciojn.  Se vi ne estas certa kio "
-#~ "enigi,\n"
-#~ "vi povas havigi la øustan informon de via interretprovizanto."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Se vi uzos prokurajn servilojn, bonvolu konfiguri ilin nune.  Se vi ne\n"
-#~ "scias æu vi uzos prokurajn servilojn, demandu al via retadministranto aý\n"
-#~ "interretprovizanto."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Vi povas instali kriptografian paka¼on se via interreta konekto estas "
-#~ "øuste\n"
-#~ "pretigita.  Unue elektu spegulon de kie vi deziras elþuti paka¼ojn kaj "
-#~ "poste\n"
-#~ "elektu la paka¼ojn por instali.\n"
-#~ "\n"
-#~ "Notu ke vi devas elekti spegulon kaj kriptografiajn paka¼ojn laý la "
-#~ "leødonoj\n"
-#~ "de via lando."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Nun vi povas enigi la \"root\" (radiko) pasvorto por via Linuks-"
-#~ "Mandrejka\n"
-#~ "sistemo.  Vi devas enigi la pasvorton dufoje por konfirmi ke ambaý fojoj\n"
-#~ "estas identaj.\n"
-#~ "\n"
-#~ "\n"
-#~ "La \"root\"-a uzanto estas la administranto de la sistemo, kaj estas la "
-#~ "sola\n"
-#~ "uzanto permesata þanøi la sisteman konfigura¼on.  Tial, elektu æi tiun\n"
-#~ "pasvorton zorge!  Nepermesata uzado de la \"root\"-a uzanto povas esti\n"
-#~ "treege danøera al la sistema integreco kaj dateno, kaj al aliaj sistemoj\n"
-#~ "konektata al øi.  La pasvorto devus esti miksa¼o de literciferaj signoj "
-#~ "kaj\n"
-#~ "almenaý 8 signoj longa.  *Neniam* surpaperigu øin.  Tamen, ne elektu tro\n"
-#~ "longan aý komplikan pasvorton: vi devas povi memori øin sen tro multe da\n"
-#~ "peno."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Nun vi povas krei unu aý pli \"ordinara(j)\" uzanto(j), male al la\n"
-#~ "\"privilegia\" uzanto, \"root\".  Vi povas krei unu aý pli uzanto(j) por\n"
-#~ "æiu persono vi deziras permesi uzi la komputilon.  Notu ke æiu uzanto\n"
-#~ "havos viajn proprajn preferojn (grafikan medion, programajn aranøojn,\n"
-#~ "ktp.) kaj øian propran \"hejman dosierujon\", kie æi tiuj preferoj estas\n"
-#~ "konservata.\n"
-#~ "\n"
-#~ "\n"
-#~ "Antaý æio, krei uzanton por vi mem!  Eæ se vi estos la sola uzulo æe la\n"
-#~ "komputilo, vi ne devus konekti kiel \"root\" por æiutaga uzado de la\n"
-#~ "sistemo: øi estas tre alta sekureca risko.  Fari la sistemon neuzebla\n"
-#~ "estas oftege nur unu misklavo fora.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tial, vi devus konekti al la sistemo per ordinara uzanto vi kreos æi "
-#~ "tie,\n"
-#~ "kaj saluti kiel \"root\" nur por administraj kaj flegadaj kialoj."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO kaj Grub æefaj opcioj estas:\n"
-#~ "  - Startaparato: Fiksas la nomon de la aparato (ekz-e subdisko de "
-#~ "fiksdisko)\n"
-#~ "tiu enhavas la startsektoron.  Krom se vi scias specife alie, elektu\n"
-#~ "\"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Prokrastoperiodo antaý starti defaýltan sistemon: Elektas la nombron\n"
-#~ "da dekonoj de sekundo ke la startþargilo devus atendi antaý starti la\n"
-#~ "unuan sistemon.  Æi tiu utilas æe sistemoj kiuj tuj startas de la\n"
-#~ "fiksdisko malantaý ili ebligas la klavaron.  La startþargilo ne atendas "
-#~ "se\n"
-#~ "\"delay\" (prokrastoperiodo) estas ellasita aý estas fiksita al nul.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Grafika reøimo: Æi tiu specifas la VGA tekstan reøimon por uzi dum\n"
-#~ "start.  La sekvantaj valoroj estas uzeblaj:\n"
-#~ "    * normala: elektu normalan 80 per 25 tekstan reøimon.\n"
-#~ "    * <numero>: uzu la respondan tekstan reøimon."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO estas startþargilo por Sparc: øi povas starti aý Linukson aý iun "
-#~ "ajn\n"
-#~ "mastruman sistemon æeestanta æe via komputilo.  Normale, æi tiuj aliaj\n"
-#~ "mastrumaj sistemoj estas øuste detektata kaj instalada.  Se tiel ne "
-#~ "estas,\n"
-#~ "vi povas aldoni enskribon mane per æi tiu ekrano.  Zorgu elekti la "
-#~ "øustajn\n"
-#~ "parametrojn.\n"
-#~ "\n"
-#~ "\n"
-#~ "Eble vi ankaý ne deziras doni atingon al æi tiuj aliaj mastrumaj "
-#~ "sistemoj\n"
-#~ "al iu ajn.  Æiokaze vi povas forstreki la respondajn enskribojn.  Sed\n"
-#~ "æiokaze, vi bezonos startdiskon por starti ilin!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO æefaj opcioj estas:\n"
-#~ "  - Instalado de Startþargilo: Indiki kie vi deziras meti la informon\n"
-#~ "bezonata por start GNU/Linukso.  Krom se vi scias specife kion vi faras,\n"
-#~ "elektu \"Unua sektoro de drajvo (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Prokrastoperiodo antaý starti defaýltan sistemon: Elektas la nombron\n"
-#~ "da dekonoj de sekundo ke la startþargilo devus atendi antaý starti la\n"
-#~ "unuan sistemon.  Æi tiu utilas æe sistemoj kiuj tuj startas de la\n"
-#~ "fiksdisko malantaý ili ebligas la klavaron.  La startþargilo ne atendas "
-#~ "se\n"
-#~ "\"delay\" (prokrastoperiodo) estas ellasita aý estas fiksita al nul."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Nun estas tempo por konfiguri la X Fenestra Sistemo, kiu estas la kerno\n"
-#~ "de la GNU/Linuksa GUI (Grafika UzulInterfaco).  Por tiu celo, vi devas\n"
-#~ "konfiguri vian grafikan karton kaj ekranon.  La plejparto de æi tiuj "
-#~ "paþoj\n"
-#~ "estas aýtomatitaj, tamen, do via laboro eble konsistos en konfirmi kion\n"
-#~ "estis farata kaj akcepti la aranøojn. :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Kiam la konfigurado estas kompleta, X lanæiøos (krom se vi demandas al\n"
-#~ "DrakX ne fari tion) pro ke vi kontrolu øin la observu se la aranøojn\n"
-#~ "taýgas por vi.  Se ne, vi povas reveni kaj þanøi ilin, tiom da tempoj "
-#~ "kiom\n"
-#~ "estas necesa."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Se iu misas en la X-a konfigura¼o, uzu æi tiujn opciojn por øuste "
-#~ "konfiguri\n"
-#~ "la X Fenestran Sistemon."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Se vi preferas uzi grafikan saluton, elektu \"Jes\".  Aliokaze, elektu "
-#~ "\"Ne\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Via sistemo restartos.\n"
-#~ "\n"
-#~ "Post restartado, via nova Linuks-Mandrejka sistemo þargiøos aýtomate.  Se "
-#~ "vi\n"
-#~ "deziras starti en alian ekzistanta mastruman sistemon, bonvole legu la\n"
-#~ "pluan instrukcion."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Æe¶a (Programistoj)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovaka (Programistoj)"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Skribu /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "Restaýru de dosiero"
-
-#~ msgid "Save in file"
-#~ msgstr "Konservu en dosiero"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Restaýru de disketo"
-
-#~ msgid "Format all"
-#~ msgstr "Formatu æion"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Post formatado de æiuj subdisko,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "æiuj datenoj sur tiuj subdisko estos perdata"
-
-#~ msgid "Reload"
-#~ msgstr "Reþargu"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Æu vi deziras krei aýtoinstalan disketon por replikado de Linukso?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL Konfigura¼o"
-
-#, fuzzy
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Kun malproksima CUPS servilo, vi ne devas konfiguri iun printilon\n"
-#~ "æi tie; printiloj estos aýtomate dektektataj.  Se vi havas dubojn,\n"
-#~ "elektu \"Malproksima CUPS servilo\"."
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Malproksima printvico"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Domajna nomo"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Neniu printilo"
-
-#, fuzzy
-#~ msgid "start it"
-#~ msgstr "limigu"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "ISDN-a Konfigura¼on"
-
-#, fuzzy
-#~ msgid "Profile "
-#~ msgstr "muntado malsukcesis: "
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Sendrapideco: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Ricevrapideco: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Speco de konekto"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Konektas al la Interreto"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Malkonektas el la Interreto"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Malkonektado el la Interreto malsukcesis."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Malkonektado el la Interreto finis."
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "Nomo de konekto"
-
-#, fuzzy
-#~ msgid "Color configuration"
-#~ msgstr "Konfigura¼on"
-
-#~ msgid "sent: "
-#~ msgstr "sendita(j): "
-
-#~ msgid "received: "
-#~ msgstr "ricevita(j): "
-
-#~ msgid "Connect"
-#~ msgstr "Konektu"
-
-#~ msgid "Disconnect"
-#~ msgstr "Malkonektu"
-
-#~ msgid "/File/_New"
-#~ msgstr "/Dosiero/_Nova"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>N"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/Dosiero/_Malfermu"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>M"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/Dosiero/_Savu"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/Dosiero/Savu _Kiel"
-
-#~ msgid "/File/-"
-#~ msgstr "/Dosiero/-"
-
-#~ msgid "/_Options"
-#~ msgstr "/_Opcioj"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/Opcioj/Provu"
-
-#~ msgid "/_Help"
-#~ msgstr "/_Helpo"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/Helpo/_Pri..."
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Defaýlta"
-
-#~ msgid "Europe"
-#~ msgstr "Eýropo"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "Malinstalu printvicon"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Mi ne povas kompreni la enhavon de la konfigurodosiero."
-
-#~ msgid "Adapter"
-#~ msgstr "Adaptilo"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "Malebligu"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Ebligu"
-
-#, fuzzy
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Konfiguru interretan konekta¼on"
-
-#~ msgid "Choose"
-#~ msgstr "Elektu"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Vi povas specifi rekte la URI por atingi la printilon per CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Jes, printu Askian provpaøon"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Jes, printu PostSkriban provpaøon"
-
-#~ msgid "Paper Size"
-#~ msgstr "Papergrandeco"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "El¼etu paøon post tasko?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint-aj pelilaj opcioj"
-
-#~ msgid "Color depth options"
-#~ msgstr "Kolorprofunecaj opcioj"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Printu tekston kiel PostScripto?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Riparu þtuparan tekston?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Nombro de paøoj en eliga paøo"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr ""
-#~ "Dekstra/Maldrekstra marøenoj en punktoj (1/72 de colo, proksimume 1/3 mm)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr ""
-#~ "Supra/Malsupra marøenoj en punktoj (1/72 de colo, proksimume 1/3 mm)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Aldonaj GhostScript-aj opcioj"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Aldonaj Tekstaj opcioj"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Inversigu ordon de paøoj"
-
-#~ msgid "CUPS starting"
-#~ msgstr "CUPS startas"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Elektu Malproksiman Printilan Konekton"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Æiuj printilo bezonas nomon (ekzemple lp).\n"
-#~ "Aliaj parametroj, ekzemple la priskribon de la printilo aý øian lokon\n"
-#~ "vi povas difini.  Kiu nomo devus uzata por æi tiu printilo kaj kiel\n"
-#~ "øi estas konektata?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Æiuj printvico (al kiu printajn taskojn estas direktata) bezonas nomon\n"
-#~ "(ofte lp) kaj fonan eneligan dosierujon asociata kun øi.  Kiu nomo kaj\n"
-#~ "dosierujo devus uzata por æi tiu printvico?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nomo de printvico"
-
-#~ msgid "Spool directory"
-#~ msgstr "Fona eneliga dosierujo"
diff --git a/perl-install/share/po/es.po b/perl-install/share/po/es.po
deleted file mode 100644
index 59008bf84..000000000
--- a/perl-install/share/po/es.po
+++ /dev/null
@@ -1,9479 +0,0 @@
-# Translation file (spanish) of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# Pablo Saratxaga <pablo@mandrakesoft.com>, 1999-2000
-# Fabian Mandelbaum <fabman@mandrakesoft.com>, 2000, 2001
-# Juan Manuel García Molina <juanmagm@mail.com>, 2000, 2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-09-23 19:28GMT\n"
-"Last-Translator: Juan Manuel García Molina <juanmagm@mail.com>\n"
-"Language-Team: Spanish <cooker-i18n@linux-mandrake.com>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Configurar los monitores independientemente"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Usar extensión Xinerama"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configurar sólo la tarjeta \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Configuración multi-monitor"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Su sistema soporta configuración multi-monitor.\n"
-"¿Qué desea hacer?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Tarjeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Seleccione una tarjeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Elija un servidor X"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "Servidor X"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "¿Qué tipo de configuración de XFree desea tener?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Su tarjeta puede admitir aceleración 3D pero sólo con XFree %s.\n"
-"XFree %s admite su tarjeta y puede tener mejor comportamiento en 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Su tarjeta puede admitir aceleración 3D por hardware con XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s con aceleración 3D por hardware"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Su tarjeta puede admitir aceleración 3D por hardware con XFree %s,\n"
-"ADVIERTA QUE ESTO ES EXPERIMENTAL Y PUEDE COLGAR SU ORDENADOR."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s con aceleración 3D EXPERIMENTAL por hardware"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Su tarjeta sólo puede admitir aceleración de 3D por hardware con XFree %s,\n"
-"ADVIERTA QUE ESTO ES EXPERIMENTAL Y PUEDE COLGAR SU ORDENADOR.\n"
-"XFree %s admite su tarjeta y puede tener un mejor comportamiento en 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalación del controlador de la pantalla)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "Configuración de XFree"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Seleccione la cantidad de memoria de su tarjeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Elija las opciones para el servidor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Elija un monitor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Los dos parámetros críticos son la frecuencia de barrido vertical, que "
-"indica la frecuencia\n"
-"a la cual se refresca la pantalla entera, y más importante aún, la "
-"frecuencia de sincronización\n"
-"horizontal, la cual es la frecuencia de las líneas de barrido horizontal.\n"
-"\n"
-"Es MUY IMPORTANTE que no especifique un tipo de monitor con una\n"
-"frecuencia de sincronización superior a la capacidad real de su monitor:\n"
-"puede dañar su monitor.\n"
-" En caso de duda, elija una configuración conservadora."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Frecuencia de barrido horizontal"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Frecuencia de barrido vertical"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "El monitor no está configurado"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "La tarjeta gráfica todavía no está configurada"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Aún no ha elegido las resoluciones"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "¿Desea probar la configuración?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Advertencia: probar con esta tarjeta de vídeo puede colgar su ordenador"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Probar la configuración"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"intente cambiar algunos parámetros"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Ocurrió un error:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Saliendo en %d segundos"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "¿Es ésta la configuración correcta?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ocurrió un error, intente cambiar algunos parámetros"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Resolución"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Elija la resolución y la profundidad de colores"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Tarjeta gráfica: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Servidor XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Modo experto"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Mostrar todo"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Resoluciones"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Distribución del teclado: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo de ratón: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo del ratón: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frecuencia horizontal del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Frecuencia vertical del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Tarjeta gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identificación de la tarjeta gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memoria de la tarjeta gráfica: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profundidad de color: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolución: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Controlador XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Preparando la configuración de X-Window"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "¿Qué desea hacer?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Cambiar el monitor"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Cambiar la tarjeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Cambiar las opciones del servidor X"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Cambiar la resolución"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Mostrar información"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Probar de nuevo"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Salir"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"¿Conservar los cambios?\n"
-"La configuración actual es:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Abra de nuevo una sesión %s para activar los cambios"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Por favor salga de la sesión y luego pulse Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X al arrancar"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Puede configurar su computadora para que inicie X automáticamente\n"
-"al arrancar. ¿Desea que se lance X cuando reinicie?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 colores (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil colores (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil colores (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 millones de colores (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 billones de colores (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB or más"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA estándar, 640x480 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatible 8514, 1024x768 a 87 Hz entrelazado (sin 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz entrelazado, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA extendido, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA no-entrelazado, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA alta-frecuencia, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Monitor multi-frecuencia que soporta 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Monitor multi-frecuencia que soporta 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Monitor multi-frecuencia que soporta 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor que soporta 1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor que soporta 1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Primer sector de la partición de arranque"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Primer sector del disco (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "Instalación de SILO"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "¿Dónde quiere instalar el cargador de arranque?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "Instalación de LILO/grub"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO con menú de texto"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO con menú gráfico"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Arrancar desde DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Opciones principales del cargador de arranque"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Cargador de arranque a usar"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Instalación del cargador de arranque"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Dispositivo de arranque"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (no funciona con BIOS antiguos)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Compacto"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "compacto"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Modo de vídeo"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Demora antes de arrancar la imagen predeterminada"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Contraseña"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Contraseña (de nuevo)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Restringir las opciones de la línea de comandos"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "restringir"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Limpiar /tmp en cada inicio del equipo"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precise el tamaño de la RAM si es necesario (se encontraron %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Activar perfiles múltiples"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Proporcione el tamaño de la RAM en MB"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"La opción \"Restringir las opciones de la línea de comandos\"\n"
-"no tiene sentido sin contraseña"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Vuelva a intentarlo, por favor"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Las contraseñas no coinciden"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Mensaje de inicio"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Demora de open firmware"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Tiempo de espera de arranque del núcleo"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "¿Habilitar el arranque desde CD?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "¿Habilitar el arranque de OF?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "¿SO predeterminado?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Aquí están las diferentes entradas.\n"
-"Puede añadir otras o cambiar las que ya existen."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Añadir"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Hecho"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Modificar"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "¿Qué tipo de entrada desea añadir?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Otro SO (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Otro SO (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Otro SO (windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Imagen"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Raíz"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Añadir"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Lectura/Escritura"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tabla"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Inseguro"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Etiqueta"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Por defecto"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Tamaño de initrd"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Quitar entrada"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "No se admite una etiqueta vacía"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Esta etiqueta ya está en uso"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s interfaces %s encontradas"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "¿Tiene alguna otra?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "¿Tiene alguna interfaz %s?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "No"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Sí"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Ver información sobre el hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalando controlador para la tarjeta %s %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(módulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "¿Qué controlador de %s debo probar?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"En algunos casos, el controlador de %s necesita información extra\n"
-"para funcionar correctamente, aunque normalmente funcione sin ella.\n"
-"¿Desea especificar información extra para el controlador o dejar que el "
-"mismo\n"
-"pruebe su equipo y encuentre la información que necesita? A veces,\n"
-"el probar el equipo puede provocar que éste se cuelgue, pero no debería\n"
-"causar ningún daño."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Autodetección"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Especificar las opciones"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Ahora puede suministrar las opciones para el módulo %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Aquí deben ir las diferentes opciones para el módulo %s.\n"
-"Las opciones son de la forma \"nombre=valor nombre2=valor2 ...\".\n"
-"Por ejemplo, \"io=0x300 irq=7\""
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Opciones de los módulos:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Error al cargar el módulo %s.\n"
-"¿Desea intentarlo de nuevo con otros parámetros?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s ya fue añadido)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Esta contraseña es demasiado sencilla"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Introduzca el nombre de usuario"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"El nombre de usuario (login) sólo debe contener letras, números, `-' y `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Este nombre de usuario ya fue añadido"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Añadir un usuario"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introduzca un usuario\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Aceptar el usuario"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Nombre y apellidos"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Nombre del usuario"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Icono"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Entrada automática"
-
-#: ../../any.pm_.c:757
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Puede configurar su computadora para que entre automáticamente\n"
-"en sesión con un usuario dado al arrancar. ¿Desea esa funcionalidad?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Elija el usuario predeterminado:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Elija el gestor de ventanas a ejecutar:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Por favor, elija el idioma a usar."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Puede elegir otros idiomas, que estarán disponibles después de la instalación"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Todo"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"¡Bienvenido a %s, el selector de SO de arranque!\n"
-"\n"
-"Elija un sistema operativo de la lista o espere %d segundos\n"
-"para que arranque el sistema predeterminado.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "¡Bienvenido a GRUB, el selector de SO de arranque!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use las teclas %c y %c para seleccionar una entrada."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pulse intro para iniciar el SO elegido, pulse 'e' para editar"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "los comandos antes de iniciar, o pulse 'c' para una linea de comandos."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Se va a iniciar la entrada resaltada en %d segundos."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "no hay espacio suficiente en /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Escritorio"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Menú inicio"
-
-#: ../../bootloader.pm_.c:972
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "No puede instalar el cargador de arranque en una partición %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "todavía no está implementada la ayuda.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuración del estilo de arranque"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Archivo"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Archivo/_Salir"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>S"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Monitor categorizante de estilo nuevo"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor de estilo nuevo"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor tradicional"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor tradicional Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Iniciar Aurora en el momento del arranque"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Modo de lilo/grub"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"En este momento está usando %s como gestor de arranque.\n"
-"Haga click sobre configurar para lanzar el asistente de configuración."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Configurar"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Modo de arranque"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Modo del sistema"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Lanzar el sistema X-Window al comenzar"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "No, no deseo entrada automática"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Sí, deseo entrada automática con este (usuario, escritorio)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "Aceptar"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "¡no se puede abrir /etc/inittab para lectura: %s !"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Falló la instalación de LILO. Ocurrió el siguiente error:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutos"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d segundos"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Por favor, haga primero una copia de seguridad de sus datos"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "¡Lea con cuidado!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Si piensa usar aboot, no olvide dejar espacio libre (2048 sectores es\n"
-"suficiente) al principio del disco"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Error"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Asistente"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Nuevo"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "Remoto"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Punto de montaje"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Opciones"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Desmontar"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Montar"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Elija una acción"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tiene una partición FAT de gran tamaño\n"
-"(generalmente usada por DOS/Windows de MicroSoft).\n"
-"Le sugiero que primero cambie el tamaño de la misma\n"
-"(para eso haga clic sobre ella, y luego sobre \"Redimensionar\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Por favor, haga clic sobre una partición"
-
-#: ../../diskdrake.pm_.c:240
-msgid "Please click on a media"
-msgstr "Por favor, haga clic sobre un medio"
-
-#: ../../diskdrake.pm_.c:243
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr ""
-"Por favor, haga clic sobre un botón de arriba\n"
-"\n"
-"o utilice \"Nuevo\""
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr "Usar \"Nuevo\""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Detalles"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Journalised FS"
-msgstr "Sist. arch. con journal"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Intercambio"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Vacío"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Otros"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Tipos de sistemas de archivos:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Crear"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Use \"%s\" en su lugar"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Borrar"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Use \"Desmontar\" primero"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Se perderán todos los datos de la partición %s después de cambiar su tipo"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "¿Dónde desea montar el dispositivo %s?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "Opciones de montaje"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "Varios"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "Soportes removibles"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "Cambiar tipo"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "¿Qué sistema de archivos desea?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "Buscando recurso compartido NFS disponible"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "Buscando recurso compartido NFS del servidor %s"
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-"Si la lista superior no contiene la entrada deseada, introdúzcala aquí:"
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Servidor"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "Recurso compartido"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "Buscando recurso compartido Samba disponible"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "Buscando recurso compartido Samba del servidor %s"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "Elija una partición"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Elija otra partición"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Salir"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Cambiar al modo experto"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Cambiar al modo normal"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Deshacer"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "¿Seguir adelante?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Salir sin grabar"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "¿Salir del programa sin grabar la tabla de particiones?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "¿Desea guardar las modificaciones en /etc/fstab?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Asignación automática"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Borrar todas"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Más"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "Información del disco rígido"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "No hay espacio libre suficiente para la asignación automática"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Todas las particiones primarias están usadas"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "No se pueden agregar más particiones"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Por favor, para tener más particiones borre alguna para poder crear una "
-"partición extendida"
-
-#: ../../diskdrake_interactive.pm_.c:285
-msgid "Save partition table"
-msgstr "Guardar la tabla de particiones"
-
-#: ../../diskdrake_interactive.pm_.c:286
-msgid "Restore partition table"
-msgstr "Restaurar la tabla de particiones"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Rescatar la tabla de particiones"
-
-#: ../../diskdrake_interactive.pm_.c:289
-msgid "Reload partition table"
-msgstr "Volver a cargar la tabla de particiones"
-
-#: ../../diskdrake_interactive.pm_.c:293
-msgid "Removable media automounting"
-msgstr "Montaje automático de dispositivos extraíbles"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Elija un archivo"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La tabla de particiones de respaldo no tiene\n"
-"el mismo tamaño.  ¿Desea continuar de todas formas?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Advertencia"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Inserte un disquete en la unidad\n"
-"Se perderán todos los datos del disquete"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Tratando de rescatar la tabla de particiones"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "Información detallada"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Redimensionar"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Desplazar"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formatear"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Activar"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Añadir al RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Añadir al LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Quitar del RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Quitar del LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Modificar el RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Usar para loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Crear una partición nueva"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Sector de comienzo: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Tamaño en MB: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Tipo sist. archivos: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Punto de montaje: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Preferencia: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-msgid "Remove the loopback file?"
-msgstr "¿Borrar el archivo de loopback?"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Cambiar el tipo de partición"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "Cambiando de ext2 a ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "¿Donde desea montar el archivo de loopback %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"No se puede deseleccionar el punto de montaje ya que esta partición\n"
-"se usa para un montaje en loopback.\n"
-"Quite el montaje de loopback primero"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Calculando los límites del sistema de archivos FAT"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Redimensionando"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Esta partición no es redimensionable"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"Debería hacer una copia de seguridad de todos los datos de esta partición"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Se perderán todos los datos de la partición %s tras cambiar su tamaño"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Eligiendo el tamaño nuevo"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "Tamaño nuevo en MB: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "¿A qué disco desea desplazarla?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "¿A qué sector desea desplazarla?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Desplazando"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Desplazando una partición..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Elegir un RAID existente al que añadir"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "nuevo"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Elegir un LVM existente al que añadir"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "¿nombre de LVM?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Esta partición no puede usarse para el loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Nombre del archivo de loopback: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-msgid "Give a file name"
-msgstr "Indique el nombre de un archivo"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"El archivo ya lo utiliza otro dispositivo loopback.\n"
-"Elija otro archivo, por favor"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "El archivo ya existe. ¿Desea usarlo?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "dispositivo"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "nivel"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "tamaño de los bloques"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Cuidado: esta operación es peligrosa."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "¿Qué tipo de particionamiento?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Disculpe, pero no se permite la creación de una partición /boot tan lejos\n"
-"en el disco (en un cilindro > 1024). Puede usar lilo LILO (y es probable "
-"que\n"
-"no funcione), o bien no utiliza LILO (y entonces no necesita /boot)"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"La partición que escogió para usar como raíz (/) está físicamente ubicada\n"
-"después del 1024º cilindro del disco rígido, y no tiene partición /boot.\n"
-"Si piensa usar el cargador de arranque LILO, tenga en cuenta que tiene\n"
-"que añadir una partición /boot"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Eligió una partición RAID en software como partición raíz (/).\n"
-"Ningún cargador de arranque es capaz de manejarlo sin una partición /boot.\n"
-"Así que tenga en cuenta que tiene que añadir una partición /boot."
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "¡Se escribirá al disco la tabla de particiones de la unidad %s!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Necesita reiniciar el equipo para que la modificación tenga efecto"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Se perderán todos los datos de la partición %s después de formatearla"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Formateando"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formateando el archivo de loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formateando la partición %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Hide files"
-msgstr "Ocultar archivos"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Move files to the new partition"
-msgstr "Mover los archivos a la nueva partición"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"El directorio %s ya tiene algunos datos\n"
-"(%s)"
-
-#: ../../diskdrake_interactive.pm_.c:906
-msgid "Moving files to the new partition"
-msgstr "Moviendo los archivos a la nueva partición"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr "Copiando %s"
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, c-format
-msgid "Removing %s"
-msgstr "Borrando %s"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Dispositivo: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Letra DOS: %s (simplemente una adivinanza)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Tipo: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Nombre: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Comienzo: sector %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Tamaño: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectores"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Cilindro %d a cilindro %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Formateado\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "No formateado\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Montado\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Archivo(s) de loopback:\n"
-"   %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partición predeterminada de arranque\n"
-"    (para arranque de MS-DOS, no para lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivel %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Tamaño de los bloques %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discos-RAID %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nombre del archivo de loopback: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Es probable que esta partición sea\n"
-"una partción de Controlador, probablemente\n"
-"debería dejarla como está.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Esta partición especial de Bootstrap\n"
-"es para el arranque\n"
-"dual de su sistema.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Tamaño: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometría: %s cilindros, %s cabezas, %s sectores\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discos-LVM %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo de la tabla de particiones: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "en el bus %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Opciones: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formateo de %s falló"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "No sé cómo formatear %s en el tipo %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "mount falló"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck falló con código de salida %d o señal %d"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "mount falló: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "error desmontando %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simple"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servidor"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "No se puede usar JFS para particiones menores de 32MB"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "No se puede usar ReiserFS para particiones menores de 32MB"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Los puntos de montaje deben comenzar con una /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ya existe una partición con el punto de montaje %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "No puede usar un Volumen Lógico LVM para el punto de montaje %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Este directorio debería permanecer dentro del sistema de archivos raíz"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Necesita un sistema de archivos verdadero (ext2, reiserfs) para este punto "
-"de montaje\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Error al abrir %s para escribir: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ocurrió un error - no se encontró ningún dispositivo válido para crear los "
-"nuevos sistemas de archivos. Por favor, verifique su equipo para saber la "
-"razón de este fallo"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "¡No tiene ninguna partición!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux es un sistema multiusuario, y esto significa que cada usuario\n"
-"puede tener sus preferencias propias, sus archivos propios, y así\n"
-"sucesivamente. Puede leer la \"Guía del Usuario\" para aprender más. Pero,\n"
-"a diferencia de \"root\", que es el administrador, los usuarios que agregue\n"
-"aquí no podrán cambiar nada excepto su configuración y sus archivos\n"
-"propios. Tendrá que crear al menos un usuario no privilegiado para Ud.\n"
-"mismo. Esa cuenta es donde debería conectarse para el uso diario. Aunque es\n"
-"muy práctico ingresar como \"root\" diariamente, ¡también puede ser muy\n"
-"peligroso! El error más leve podría significar que su sistema deje de\n"
-"funcionar. Si comete un error serio como usuario no privilegiado, sólo\n"
-"puede llegar a perder algo de información, pero no todo el sistema.\n"
-"\n"
-"Primero tendrá que ingresar su nombre real. Esto no es obligatorio, por\n"
-"supuesto - ya que, en realidad, puede ingresar lo que desee. DrakX tomará\n"
-"entonces la primer palabra que ingresó y la copiará al campo \"Nombre de\n"
-"usuario\". Este es el nombre que este usuario en particular usará para\n"
-"ingresar al sistema. Lo puede cambiar. Luego tendrá que ingresar una\n"
-"contraseña aquí. La contraseña de un usuario no privilegiado (regular) no\n"
-"es tan crucial como la de \"root\" desde el punto de vista de la seguridad,\n"
-"pero esto no es razón alguna para obviarla - después de todo, son sus\n"
-"archivos los que están en riesgo.\n"
-"\n"
-"Si hace clic sobre \"Aceptar usuario\", entonces puede agregar tantos como\n"
-"desee. Agregue un usuario para cada uno de sus amigos: por ejemplo su padre\n"
-"o su hermana. Cuando haya terminado de agregar todos los usuarios que\n"
-"desee, seleccione \"Hecho\".\n"
-"\n"
-"Hacer clic sobre el botón \"Avanzadas\" le permite cambiar el \"shell\"\n"
-"predeterminado para ese usuario (bash por defecto)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Arriba se listan las particiones Linux existentes que se detectaron en su\n"
-"disco rígido. Puede mantener las elecciones hechas por el asistente, las\n"
-"mismas son buenas para las instalaciones más comunes. Si hace cambios, al\n"
-"menos debe definir una partición raíz (\"/\"). No elija una partición muy\n"
-"pequeña o no podrá instalar software suficiente. Si desea almacenar sus\n"
-"datos en una partición separada, también puede necesitar crear una\n"
-"partición para \"/home\" (sólo es posible si tiene más de una partición\n"
-"Linux disponible).\n"
-"\n"
-"Cada partición se lista como sigue: \"Nombre\", \"Capacidad\".\n"
-"\n"
-"\"Nombre\" está estructurado: \"tipo de disco rígido\", \"número de disco\n"
-"rígido\", \"número de partición\" (por ejemplo, \"hda1\").\n"
-"\n"
-"\"Tipo de disco rígido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n"
-"el mismo es un disco SCSI.\n"
-"\n"
-"\"Número de disco rígido\" siempre es una letra que sigue a \"hd\" o a\n"
-"\"sd\". Para los discos IDE:\n"
-"\n"
-" * \"a\" significa \"disco rígido maestro en la controladora IDE primaria"
-"\",\n"
-"\n"
-" * \"b\" significa \"disco rígido esclavo en la controladora IDE primaria"
-"\",\n"
-"\n"
-" * \"c\" significa \"disco rígido maestro en la controladora IDE\n"
-"secundaria\",\n"
-"\n"
-" * \"d\" significa \"disco rígido esclavo en la controladora IDE\n"
-"secundaria\".\n"
-"\n"
-"Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n"
-"significa \"segunda SCSI ID menor\", etc."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"La instalación Mandrake Linux se divide en varios CD-ROMs. DrakX sabe si un\n"
-"paquete seleccionado se encuentra en otro CD-ROM y expulsará el CD\n"
-"corriente y le pedirá que inserte uno diferente cuando sea necesario."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Ahora es el momento de especificar los programas que desea instalar en su\n"
-"sistema. Hay miles de paquetes disponible para Mandrake Linux, y no se\n"
-"supone que los conozca a todos de memoria.\n"
-"\n"
-"Si está realizando una instalación estándar desde el CD-ROM, primero se le\n"
-"pedirá que especifique los CDs que tiene (sólo en modo Experto). Marque las\n"
-"casillas que corresponden a los CDs que tiene disponibles para la\n"
-"instalación. Haga clic sobre \"Aceptar\" cuando esté listo para continuar.\n"
-"\n"
-"Los paquetes se ordenan en grupos que corresponden a un uso particular de\n"
-"su máquina. Los grupos en sí mismos están ordenados en cuatro secciones:\n"
-"\n"
-" * \"Estación de trabajo\": si planea utilizar su máquina como una estación\n"
-"de trabajo, seleccione uno o más grupos correspondientes.\n"
-"\n"
-" * \"Desarrollo\": si la máquina se utilizará para programación, elija\n"
-"el(los) grupo(s) deseado(s).\n"
-"\n"
-" * \"Servidor\": finalmente, si se pretende usar la máquina como un\n"
-"servidor, aquí puede seleccionar los servicios más comunes que desea que se\n"
-"instalen en la máquina.\n"
-"\n"
-" * \"Entorno gráfico\": seleccione aquí su entorno gráfico preferido. Si\n"
-"desea tener una estación de trabajo gráfica, ¡seleccione al menos uno!\n"
-"\n"
-"Si mueve el cursor del ratón sobre el nombre de un grupo se mostrará un\n"
-"pequeño texto explicativo acerca de este grupo.\n"
-"\n"
-"Puede marcar la opción \"Selección por paquetes individuales\" que es útil\n"
-"si está familiarizado con los paquetes que se ofrecen o si desea tener un\n"
-"control total sobre lo que se instalará.\n"
-"\n"
-"Si inició la instalación en el modo \"Actualizar\", puede deseleccionar\n"
-"todos los grupos para evitar instalar cualquier paquete nuevo y simplemente\n"
-"reparar o actualizar un sistema existente."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Finalmente, dependiendo de si Ud. elige seleccionar los paquetes\n"
-"individuales o no, se le presentará un árbol que contiene a todos los\n"
-"paquetes clasificados por grupos y subgrupos. Mientras navega por el árbol,\n"
-"puede seleccionar grupos enteros, subgrupos, o simplemente paquetes.\n"
-"\n"
-"Tan pronto como selecciona un paquete en el árbol, aparece una descripción\n"
-"del mismo sobre la derecha. Cuando ha finalizado con su selección, haga\n"
-"clic sobre el botón \"Instalar\" que lanzará el proceso de instalación.\n"
-"Dependiendo de la velocidad de su hardware y de la cantidad de paquetes que\n"
-"se deben instalar, el proceso puede tardar un rato en completarse. En la\n"
-"pantalla se muestra una estimación del tiempo necesario para completar la\n"
-"instalación para ayudarlo a considerar si tiene tiempo suficiente par\n"
-"disfrutar una taza de café.\n"
-"\n"
-"!! Si ha sido seleccionado un paquete de servidor ya sea intencionalmente o\n"
-"porque era parte de un grupo completo, se le pedirá que confirme que\n"
-"realmente desea que se instalen esos servidores. Bajo Mandrake Linux,\n"
-"cualquier servidor instalado se inicia de manera predeterminada al momento\n"
-"del arranque. Aunque estos son seguros y no tienen problemas conocidos al\n"
-"momento en que se publicó la distribución, puede ocurrir que más tarde se\n"
-"descubran vulnerabilidades en la seguridad. En particular, si no sabe que\n"
-"es lo que se supone que hace un servicio o la razón por la cual se está\n"
-"instalando, entonces haga clic sobre \"No\". Si hace clic sobre \"Sí\" se\n"
-"instalarán todos los servicios listados y de manera predeterminada los\n"
-"mismos arrancarán automáticamente. !!\n"
-"\n"
-"La opción \"Dependencias automáticas\" simplemente deshabilita el diálogo\n"
-"de advertencia cuando el instalador selecciona automáticamente un paquete.\n"
-"Esto ocurre porque se determina que es necesario para satisfacer una\n"
-"dependencia con otro paquete para poder completar la instalación\n"
-"satisfactoriamente.\n"
-"\n"
-"El pequeño icono del disquete al final de la lista le permite cargar la\n"
-"lista de paquetes elegida durante una instalación previa. Haga clic sobre\n"
-"este icono y se le pedirá que inserte un disquete creado con anterioridad\n"
-"al final de otra instalación. Vea el segundo consejo del último paso para\n"
-"información sobre como crear dicho disquete."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Si desea conectar su computadora a la Internet o a una red de área local,\n"
-"por favor elija la opción correcta. Por favor, encienda su dispositivo\n"
-"antes de elegir la opción correcta para permitir que DrakX lo detecte\n"
-"automáticamente.\n"
-"\n"
-"Durante la instalación Mandrake Linux propone la configuración de una\n"
-"conexión a la Internet. Las conexiones disponibles son: módem tradicional,\n"
-"módem RDSI, conexión ADSL, cable módem, y finalmente una simple conexión\n"
-"LAN (Ethernet).\n"
-"\n"
-"Aquí no entraremos en detalle en cada configuración. Simplemente debe\n"
-"asegurarse que su Proveedor de Servicios de Internet o su administrador del\n"
-"sistema le proporcionaron todos los parámetros de configuración.\n"
-"\n"
-"Puede consultar el capítulo del manual sobre las conexiones a la Internet\n"
-"para detalles acerca de la configuración, o simplemente esperar hasta que\n"
-"su sistema esté instalado y usar el programa que se describe aquí para\n"
-"configurar su conexión.\n"
-"\n"
-"Si desea configurar la red más tarde, luego de la instalación, o si ha\n"
-"finalizado de configurar su conexión de red, haga clic sobre \"Cancelar\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Ahora puede elegir los servicios que desea iniciar durante el arranque.\n"
-"\n"
-"Aquí se presentan todos los servicios disponible con la instalación\n"
-"corriente. Debe revisarlos con cuidado y desmarcar aquellos que no siempre\n"
-"son necesarios al arrancar.\n"
-"\n"
-"Puede obtener un pequeño texto explicativo acerca de un servicio\n"
-"seleccionando un servicio específico. Sin embargo, si no está seguro si un\n"
-"servicio es útil o no, es más seguro dejar el comportamiento\n"
-"predeterminado.\n"
-"\n"
-"Tenga mucho cuidado en esta etapa si pretende usar su máquina como un\n"
-"servidor: probablemente no deseará arrancar servicios que no necesita. Por\n"
-"favor recuerde que varios servicios pueden ser peligrosos si se habilitan\n"
-"en un servidor. En general, seleccione sólo aquellos servicios que\n"
-"realmente necesita."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux administra la hora en GMT (Hora de Greenwich) y la traduce a la\n"
-"hora local de acuerdo al huso horario que Ud. seleccionó."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-"X (por X Window System) es el corazón de la interfaz gráfica de GNU/Linux\n"
-"en el que se apoyan todos los entornos gráficos (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) que se incluyen con Mandrake Linux. En esta sección, DrakX\n"
-"intentará configurar a X automáticamente.\n"
-"\n"
-"Es extremadamente raro que esto falle, a menos que el hardware sea muy\n"
-"antiguo (o muy nuevo). Si no falla, arrancará X automáticamente con la\n"
-"mejor resolución posible dependiendo del tamaño de su monitor. Luego\n"
-"aparecerá una ventana que le pregunta si la puede ver.\n"
-"\n"
-"Si está haciendo una instalación en modo \"Experto\", ingresará al\n"
-"asistente de configuración de X. Para más información sobre este asistente\n"
-"vea la sección correspondiente del manual.\n"
-"\n"
-"Si puede ver el mensaje y responde \"Sí\", entonces DrakX continuará con el\n"
-"paso siguiente. Si no puede ver el mensaje, simplemente significa que la\n"
-"configuración no era la correcta y la prueba terminará automáticamente\n"
-"luego de 10 segundos, restaurando la pantalla."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"La primera vez que intenta la configuración de X Ud. puede no estar muy\n"
-"satisfecho con el resultado (la pantalla es muy pequeña, está corrida hacia\n"
-"la izquierda o hacia la derecha...). Es por esto que, incluso si X arranca\n"
-"correctamente, DrakX le preguntará si la configuración le conviene. También\n"
-"propondrá cambiarla mostrando una lista de modos válidos que pudo\n"
-"encontrar, y le pedirá que seleccione alguno.\n"
-"\n"
-"Como último recurso, si todavía no puede hacer que X funcione, elija\n"
-"\"Cambiar la tarjeta gráfica\", seleccione \"Tarjeta no listada\", y cuando\n"
-"se le pregunte acerca de que servidor desea elija \"FBDev\". Esta es una\n"
-"opción a prueba de fallos que funciona con cualquier tarjeta gráfica\n"
-"moderna. Luego elija \"Probar nuevamente\" para estar seguro que funciona."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Finalmente, se le preguntará si desea ver la interfaz gráfica en el\n"
-"arranque. Note que esta pregunta se le formula incluso si eligió no probar\n"
-"la configuración. Obviamente, querrá responder \"No\" si su máquina va a\n"
-"actuar como un servidor, o si no tuvo éxito con la configuración de la\n"
-"pantalla."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"El CD-ROM de Mandrake Linux tiene un modo de rescate incorporado. Ud. puede\n"
-"acceder al mismo arrancando desde el CD-ROM, presionando la tecla >>F1<<\n"
-"durante el arranque y tecleando >>rescue<< en el prompt. Pero en caso que\n"
-"su computadora no pueda arrancar desde el CD-ROM, debería recurrir a este\n"
-"paso al menos en dos situaciones:\n"
-"\n"
-" * cuando instala el cargador de arranque, DrakX sobreescribirá el sector "
-"de\n"
-"arranque (MBR) de su disco principal (a menos que esté utilizando otro\n"
-"administrador de arranque) de forma tal que pueda iniciar o bien Windows o\n"
-"bien GNU/Linux (asumiendo que tiene Windows en su sistema). Si necesita\n"
-"volver a instalar Windows, el proceso de instalación de Microsoft\n"
-"sobreescribirá el sector de arranque, y entonces ¡Ud. no podrá iniciar\n"
-"GNU/Linux!\n"
-"\n"
-" * si surge un problema y Ud. no puede iniciar GNU/Linux desde el disco\n"
-"rígido, este disquete será la única manera de iniciar GNU/Linux. El mismo\n"
-"contiene una buena cantidad de herramientas del sistema para restaurar un\n"
-"sistema que colapsó debido a una falla de energía, un error de tecleo\n"
-"infortunado, un error en una contraseña, o cualquier otro motivo.\n"
-"\n"
-"Cuando haga clic sobre este paso se le pedirá que inserte un disquete\n"
-"dentro de la disquetera. El disquete que insertará debe estar vacío o\n"
-"contener datos que no necesite. No tendrá que formatearlo ya que DrakX\n"
-"sobreescribirá el disquete por completo."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Ahora necesita elegir el lugar de su disco rígido donde se instalará su\n"
-"sistema operativo Mandrake Linux. Si su disco rígido está vacío o si un\n"
-"sistema operativo existente está utilizando todo el espacio disponible,\n"
-"necesitará particionar el disco. Básicamente, particionar un disco rígido\n"
-"consiste en dividirlo lógicamente para crear espacio para instalar su\n"
-"sistema Mandrake Linux nuevo.\n"
-"\n"
-"Debido a que los efectos del particionado por lo general son irreversibles,\n"
-"el particionado puede ser intimidante y estresante si Ud. es un usuario\n"
-"inexperto. Por fortuna, hay un asistente que simplifica este proceso. Antes\n"
-"de comenzar, por favor consulte el manual y tómese su tiempo.\n"
-"\n"
-"Si está corriendo la instalación en modo Experto, ingresará a DiskDrake, la\n"
-"herramienta de particionado de Mandrake Linux, que le permite un ajuste\n"
-"fino de sus particiones. Vea el capítulo DiskDrake del manual. Desde la\n"
-"interfaz de instalación, puede utilizar los asistentes como se describe\n"
-"aquí haciendo clic sobre el botón \"Asistente\" del diálogo.\n"
-"\n"
-"Si ya se han definido particiones, ya sea de una instalación previa o por\n"
-"medio de otra herramienta de particionado, simplemente seleccione esas para\n"
-"instalar su sistema Linux.\n"
-"\n"
-"Si no hay particiones definidas, necesitará crearlas usando el asistente.\n"
-"Dependiendo de la configuración de su disco rígido, están disponibles\n"
-"varias opciones:\n"
-"\n"
-" * \"Usar espacio libre\": esta opción simplemente llevará a un "
-"particionado\n"
-"automático de su(s) disco(s) vacío(s). No se le pedirán más detalles ni se\n"
-"le formularán más preguntas.\n"
-"\n"
-" * \"Usar partición existente\": el asistente ha detectado una o más\n"
-"particiones Linux existentes en su disco rígido. Si desea utilizarlas,\n"
-"elija esta opción.\n"
-"\n"
-" * \"Usar el espacio libre en la partición Windows\": si Microsoft Windows\n"
-"está instalado en su disco rígido y ocupa todo el espacio disponible en el\n"
-"mismo, Ud. tiene que liberar espacio para Linux. Para hacerlo, puede borrar\n"
-"su partición y datos Microsoft Windows (vea las soluciones \"Borrar el\n"
-"disco completo\" o \"Modo experto\") o cambie el tamaño de su partición\n"
-"Microsoft Windows. El cambio de tamaño se puede realizar sin la pérdida de\n"
-"datos. Se recomienda esta solución si desea utilizar tanto Mandrake Linux\n"
-"como Microsoft Windows en la misma computadora.\n"
-"\n"
-"   Antes de elegir esta opción, por favor comprenda que después de este\n"
-"procedimiento, el tamaño de su partición Microsoft Windows será más pequeño\n"
-"que ahora. Tendrá menos espacio bajo Microsoft Windows para almacenar sus\n"
-"datos o instalar software nuevo.\n"
-"\n"
-" * \"Borrar el disco entero\": si desea borrar todos los datos y todas las\n"
-"particiones presentes en su disco rígido y reemplazarlas con su nuevo\n"
-"sistema Mandrake Linux, elija esta opción. Tenga cuidado con esta solución\n"
-"ya que no podrá revertir su elección después de confirmarla.\n"
-"\n"
-"   !! Si elige esta opción, se perderán todos los datos en su disco. !!\n"
-"\n"
-" * \"Quitar Windows\": simplemente esto borrará todo en el disco y "
-"comenzará\n"
-"particionando todo desde cero. Se perderán todos los datos en su disco.\n"
-"\n"
-"   !! Si elige esta opción, se perderán todos los datos en su disco. !!\n"
-"\n"
-" * \"Modo experto\": elija esta opción si desea particionar manualmente su\n"
-"disco rígido. Tenga cuidado - esta es una elección potente pero peligrosa.\n"
-"Puede perder todos sus datos con facilidad. Por lo tanto, no elija esta\n"
-"opción a menos que sepa lo que está haciendo."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Aquí está. Ahora la instalación está completa y su sistema GNU/Linux está\n"
-"listo para ser utilizado. Simplemente haga clic sobre \"Aceptar\" para\n"
-"volver a arrancar el sistema. Puede iniciar GNU/Linux o Windows, cualquiera\n"
-"que prefiera (si está usando el arranque dual) tan pronto como su máquina\n"
-"haya vuelto a arrancar.\n"
-"\n"
-"El botón \"Avanzadas\" (sólo en modo Experto) le muestra dos botones más\n"
-"para:\n"
-"\n"
-" * \"Generar un disquete de instalación automática\": para crear un "
-"disquete\n"
-"de instalación que realizará una instalación completa sin la asistencia de\n"
-"un operador, similar a la instalación que ha configurado recién.\n"
-"\n"
-"   Note que hay dos opciones diferentes disponibles después de hacer clic\n"
-"sobre el botón:\n"
-"\n"
-"    * \"Reproducir\". Esta es una instalación parcialmente automatizada ya "
-"que\n"
-"la etapa de particionado (y sólo esta etapa) permanece interactiva.\n"
-"\n"
-"    * \"Automatizada\". Instalación completamente automatizada: el disco "
-"rígido\n"
-"se sobreescribe por completo, y se pierden todos los datos.\n"
-"\n"
-"   Esta característica es muy útil cuando se instala una cantidad grande de\n"
-"máquinas similares. Vea la sección Auto install (en inglés) en nuestro\n"
-"sitio web.\n"
-"\n"
-" * \"Guardar selección de paquetes\"(*): guarda la selección de paquetes\n"
-"como se hizo con anterioridad. Luego, cuando haga otra instalación, inserte\n"
-"el disquete en la disquetera y ejecute la instalación yendo a la pantalla\n"
-"de ayuda con [F1], e ingrese >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Necesita un disquete formateado con FAT (para crear uno bajo GNU/Linux\n"
-"teclee \"mformat a:\")"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Cualquier partición nueva que ha sido definida se debe formatear para su\n"
-"uso (formatear significa crear un sistema de archivos).\n"
-"\n"
-"Ahora puede querer volver a formatear algunas particiones ya existentes\n"
-"para borrar cualquier dato que pudieran contener. Si desea hacerlo, por\n"
-"favor seleccione también dichas particiones.\n"
-"\n"
-"Por favor note que no es necesario volver a formatear todas las particiones\n"
-"pre-existentes. Deber volver a formatear las particiones que contienen al\n"
-"sistema operativo (tales como \"/\", \"/usr\" o \"/var\") pero no tiene que\n"
-"volver a formatear particiones que contienen datos que desea preservar\n"
-"(típicamente \"/home\").\n"
-"\n"
-"Por favor, tenga cuidado cuando selecciona las particiones. Después de\n"
-"formatear, se borrarán todos los datos en las particiones seleccionadas y\n"
-"no podrá recuperarlos en absoluto.\n"
-"\n"
-"Haga clic sobre \"Aceptar\" cuando esté listo para formatear las\n"
-"particiones.\n"
-"\n"
-"Haga clic sobre \"Cancelar\" si desea elegir otra partición para la\n"
-"instalación de su sistema operativo Mandrake Linux nuevo.\n"
-"\n"
-"Haga clic sobre \"Avanzado\" si desea seleccionar las particiones en las\n"
-"que se buscarán bloques defectuosos en el disco."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"En este momento se está instalando su sistema operativo Mandrake Linux\n"
-"nuevo. Dependiendo de la cantidad de paquetes que instalará y de la\n"
-"velocidad de su computadora, esta operación puede tomar desde unos pocos\n"
-"minutos hasta una cantidad de tiempo significativa.\n"
-"\n"
-"Por favor, tenga paciencia."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"Antes de continuar, debería leer cuidadosamente los términos de la\n"
-"licencia. Los mismos cubren a toda la distribución , y si Ud. no está de\n"
-"acuerdo con todos los términos en la misma, haga clic sobre el botón\n"
-"\"Rehusar\". Esto terminará la instalación inmediatamente. Para continuar\n"
-"con la instalación, haga clic sobre el botón \"Aceptar\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"En este punto, es tiempo de elegir el nivel de seguridad deseado para su\n"
-"máquina. Como regla general, cuanto más expuesta está la máquina, y cuantos\n"
-"más datos tenga almacenados es crucial que el nivel de seguridad en la\n"
-"misma sea más alto. Sin embargo, un nivel de seguridad más alto\n"
-"generalmente se obtiene a expensas de la facilidad de uso. Consulte el\n"
-"capítulo MSEC del \"Manual de Referencia\" para obtener más información\n"
-"sobre el significado de dichos niveles.\n"
-"\n"
-"Si no sabe que elegir, mantenga la opción predeterminada."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Ahora necesita elegir qué particiones se utilizarán para la instalación de\n"
-"su sistema Mandrake Linux. Si las particiones ya han sido definidas, ya sea\n"
-"por una instalación previa de Linux o con otra herramienta de particionado,\n"
-"puede utilizarlas. En caso contrario se deben definir particiones en el\n"
-"disco rígido.\n"
-"\n"
-"Para crear particiones, primero debe seleccionar un disco rígido. Puede\n"
-"seleccionar el disco a particionar haciendo clic sobre \"hda\" para el\n"
-"primer disco IDE, \"hdb\" para el segundo, \"sda\" para el primer disco\n"
-"SCSI y así sucesivamente.\n"
-"\n"
-"Para particionar el disco rígido seleccionado, puede utilizar estas\n"
-"opciones:\n"
-"\n"
-" * \"Borrar todo\": esta opción borra todas las particiones sobre el disco\n"
-"seleccionado.\n"
-"\n"
-" * \"Asignación automática\": esta opción le permite crear particiones Ext2\n"
-"y swap automáticamente en el espacio libre de su disco rígido.\n"
-"\n"
-" * \"Rescatar tabla de particiones\": si su tabla de particiones está\n"
-"dañada, puede intentar recuperarla usando esta opción. Por favor, tenga\n"
-"cuidado y recuerde que puede fallar.\n"
-"\n"
-" * \"Deshacer\": use esta opción para cancelar sus cambios.\n"
-"\n"
-" * \"Volver a cargar\": puede usar esta opción si desea deshacer todos los\n"
-"cambios y cargar su tabla de particiones inicial.\n"
-"\n"
-" * \"Asistente\": use esta opción si desea utilizar un asistente para\n"
-"particionar su disco rígido. Se recomienda esto si no tiene un buen\n"
-"conocimiento del particionado.\n"
-"\n"
-" * \"Restaurar desde disquete\": esta opción le permitirá restaurar una\n"
-"tabla de particiones guardada previamente en un disquete.\n"
-"\n"
-" * \"Guardar a disquete\": guarda la tabla de particiones en un disquete.\n"
-"Útil para recuperar la tabla de particiones más adelante en caso que sea\n"
-"necesario. Es altamente recomendable realizar este paso.\n"
-"\n"
-" * \"Hecho\": cuando ha terminado de particionar su disco rígido, esto\n"
-"guardará sus cambios en el disco.\n"
-"\n"
-"Nota: todas las opciones son accesibles por medio del teclado. Navegue a\n"
-"través de las particiones usando [Tab] y las flechas [Arriba/Abajo].\n"
-"\n"
-"Cuando se selecciona una partición, puede utilizar:\n"
-"\n"
-" * Ctrl-c para crear una partición nueva (cuando está seleccionada una\n"
-"partición vacía);\n"
-"\n"
-" * Ctrl-d para borrar una partición;\n"
-"\n"
-" * Ctrl-m para configurar el punto de montaje.\n"
-"\n"
-"Si está instalando en una máquina PPC, querrá crear una pequeña partición\n"
-"HFS de \"bootstrap\" de al menos 1MB que será utilizada por el cargador de\n"
-"arranque yaboot. Si opta por hacer la partición un poco más grande, digamos\n"
-"50MB, puede ver que es un lugar útil para almacenar un núcleo y ramdisk\n"
-"alternativos para arrancar en situaciones de emergencia."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Se ha detectado más de una partición Microsoft Windows en su disco rígido.\n"
-"Por favor, elija aquella a la cual desea cambiarle el tamaño para poder\n"
-"instalar su sistema operativo Mandrake Linux.\n"
-"\n"
-"Cada partición se lista como sigue: \"Nombre Linux\", \"Nombre Windows\"\n"
-"\"Capacidad\".\n"
-"\n"
-"\"Nombre Linux\" está estructurado: \"tipo de disco rígido\", \"número de\n"
-"disco rígido\", \"número de partición\" (por ejemplo, \"hda1\").\n"
-"\n"
-"\"Tipo de disco rígido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n"
-"el mismo es un disco SCSI.\n"
-"\n"
-"\"Número de disco rígido\" siempre es una letra que sigue a \"hd\" o a\n"
-"\"sd\". Para los discos IDE:\n"
-"\n"
-" * \"a\" significa \"disco rígido maestro en la controladora IDE primaria"
-"\",\n"
-"\n"
-" * \"b\" significa \"disco rígido esclavo en la controladora IDE primaria"
-"\",\n"
-"\n"
-" * \"c\" significa \"disco rígido maestro en la controladora IDE\n"
-"secundaria\",\n"
-"\n"
-" * \"d\" significa \"disco rígido esclavo en la controladora IDE\n"
-"secundaria\".\n"
-"\n"
-"Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n"
-"significa \"segunda SCSI ID menor\", etc.\n"
-"\n"
-"\"Nombre Windows\" es la letra de su unidad de disco bajo Windows (el\n"
-"primer disco o partición se denomina \"C:\")."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Por favor, tenga paciencia. Esta operación puede tomar varios minutos."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"DrakX ahora necesita saber si desea realizar una instalación por defecto\n"
-"(\"Recomendada\") o si desea tener un control mayor (\"Experto\"). También\n"
-"tiene la opción de realizar una instalación nueva o una actualización de un\n"
-"sistema Mandrake Linux existente. Al hacer clic sobre \"Instalar\" el\n"
-"sistema anterior se borrará por completo. Seleccione \"Actualizar\" si está\n"
-"actualizando o reparando un sistema existente.\n"
-"\n"
-"Por favor, elija \"Instalar\" si no hay una versión previa de Mandrake\n"
-"Linux instalada o si desea arrancar entre varios sistemas operativos.\n"
-"\n"
-"Por favor, elija \"Actualizar\" si desea actualizar o reparar una versión\n"
-"ya instalada de Mandrake Linux.\n"
-"\n"
-"Dependiendo de su conocimiento de GNU/Linux, por favor elija uno de los\n"
-"siguientes para instalar o actualizar su sistema operativo Mandrake Linux:\n"
-"\n"
-" * Recomendada: elija esta si nunca ha instalado un sistema operativo\n"
-"GNU/Linux. La instalación será muy fácil y sólo se le formularán unas pocas\n"
-"preguntas.\n"
-"\n"
-" * Experto: si tiene un conocimiento bueno de GNU/Linux, puede elegir esta\n"
-"clase de instalación. La instalación experta le permitirá realizar una\n"
-"instalación altamente personalizada. Contestar a algunas de las preguntas\n"
-"puede ser difícil si no tiene un buen conocimiento de GNU/Linux; entonces\n"
-"no elija esto a menos que sepa lo que está haciendo."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalmente, DrakX selecciona el teclado adecuado para Ud. (dependiendo del\n"
-"idioma que eligió) y Ud. ni siquiera verá este paso. Sin embargo, podría no\n"
-"tener un teclado que se corresponde exactamente con su idioma: por ejemplo,\n"
-"si Ud. es una persona hispano-parlante que está en Argentina o Méjico, su\n"
-"teclado será un teclado Latinoamericano, pero si está en España será uno\n"
-"Español. En ambos casos, Ud. tendrá que volver a este paso de la\n"
-"instalación y elegir un teclado apropiado de la lista.\n"
-"\n"
-"Haga clic sobre el botón \"Más\" para que se le presente la lista completa\n"
-"de los teclados soportados."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-"Por favor, elija su idioma preferido para la instalación y el uso del\n"
-"sistema.\n"
-"\n"
-"Al hacer clic sobre el botón \"Avanzado\" podrá seleccionar otros idiomas\n"
-"para instalar en su estación de trabajo. Seleccionar otros idiomas\n"
-"instalará los archivos específicos para la documentación del sistema y las\n"
-"aplicaciones. Por ejemplo, si albergará a gente de Francia en su máquina,\n"
-"seleccione Español como idioma principal en la vista de árbol y en la\n"
-"sección avanzada haga clic sobre la estrella gris que corresponde a\n"
-"\"Francés|Francia\".\n"
-"\n"
-"Note que se pueden instalar múltiples idiomas. Una vez que ha seleccionado\n"
-"cualquier idioma adicional haga clic sobre el botón \"Aceptar\" para\n"
-"continuar."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-"DrakX asume que, predeterminadamente, Ud. tiene un ratón de dos botones y\n"
-"lo configurará para que emule el tercer botón. DrakX sabrá automáticamente\n"
-"si es un ratón PS/2, serie o USB.\n"
-"\n"
-"Si desea especificar un tipo de ratón diferente, seleccione el tipo\n"
-"apropiado de la lista que se proporciona.\n"
-"\n"
-"Si elije un ratón distinto al predeterminado, se le presentará una pantalla\n"
-"de prueba. Use los botones y la rueda para verificar que la configuración\n"
-"es correcta. Si el ratón no está funcionando correctamente, presione la\n"
-"barra espaciadora o INTRO para \"Cancelar\" y vuelva a elegir."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Por favor seleccione el puerto correcto. Por ejemplo, el puerto COM1 bajo\n"
-"MS Windows se denomina ttyS0 bajo GNU/Linux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Este es el punto de decisión más crucial para la seguridad de su sistema\n"
-"GNU/Linux: tendrá que ingresar la contraseña de \"root\". \"root\" es el\n"
-"administrador del sistema y es el único autorizado a hacer actualizaciones,\n"
-"agregar usuarios, cambiar la configuración general del sistema, etc.\n"
-"Resumiendo, ¡\"root\" puede hacer de todo!. Es por esto que deberá elegir\n"
-"una contraseña que sea difícil de adivinar - DrakX le dirá si la que eligió\n"
-"es demasiado fácil. Como se muestra, puede elegir no ingresar una\n"
-"contraseña, pero le recomendamos encarecidamente que ingrese una, aunque\n"
-"sea sólo por una razón: no piense que debido a que Ud. arrancó GNU/Linux,\n"
-"sus otros sistemas operativos están seguros contra los errores. Eso no es\n"
-"cierto debido a que \"root\" puede sobrepasar todas las limitaciones y\n"
-"borrar, sin intención, todos los datos que se encuentran en las particiones\n"
-"accediendo a las mismas sin el cuidado suficiente. Es por esto que es\n"
-"importante que sea difícil convertirse en \"root\".\n"
-"\n"
-"La contraseña debería ser una mezcla de caracteres alfanuméricos y tener al\n"
-"menos una longitud de 8 caracteres. Nunca escriba la contraseña de \"root\"\n"
-"- eso hace que sea muy fácil comprometer a un sistema.\n"
-"\n"
-"Sin embargo, por favor no haga la contraseña muy larga o complicada debido\n"
-"a que Ud. debe poder recordarla sin realizar mucho esfuerzo.\n"
-"\n"
-"La contraseña no se mostrará en la pantalla a medida que Ud. la teclee. Por\n"
-"lo tanto, tendrá que teclear la contraseña dos veces para reducir la\n"
-"posibilidad de un error de tecleo. Si ocurre que Ud. comete dos veces el\n"
-"mismo error de tecleo, tendrá que utilizar esta contraseña \"incorrecta\"\n"
-"la primera vez que se conecte.\n"
-"\n"
-"En modo experto, se le preguntará si se conectará a un servidor de\n"
-"autenticación, por ejemplo NIS o LDAP.\n"
-"\n"
-"Si su red usa el protocolo LDAP (o NIS) para la autenticación, seleccione\n"
-"\"LDAP\" (o \"NIS\") como autenticación. Si no sabe, pregunte al\n"
-"administrador de su sistema.\n"
-"\n"
-"Si su computadora no está conectada a alguna red administrada, querrá\n"
-"elegir \"Archivos locales\" para la autenticación."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-"LILO y GRUB son cargadores de arranque para GNU/Linux. Normalmente, esta\n"
-"etapa está completamente automatizada. De hecho, DrakX analiza el sector de\n"
-"arranque del disco y actúa en función de lo que encuentre allí:\n"
-"\n"
-" * si encuentra un sector de arranque de Windows, lo reemplazará con un\n"
-"sector de arranque de GRUB/LILO de forma tal que Ud. pueda arrancar\n"
-"GNU/Linux u otro sistema operativo;\n"
-"\n"
-" * si encuentra un sector de arranque de GRUB o LILO, lo reemplazará con "
-"uno\n"
-"nuevo;\n"
-"\n"
-"En caso de duda, DrakX mostrará un diálogo con varias opciones.\n"
-"\n"
-" * \"Cargador de arranque a usar\": tiene tres opciones:\n"
-"\n"
-"    * \"LILO con menú gráfico\": si prefiere a LILO con su interfaz "
-"gráfica.\n"
-"\n"
-"    * \"GRUB\": si prefiere a GRUB (menú de texto).\n"
-"\n"
-"    * \"LILO con menú de texto\": si prefiere a LILO con su interfaz de "
-"texto.\n"
-"\n"
-" * \"Dispositivo de arranque\": en la mayoría de los casos, no cambiará lo\n"
-"predeterminado (\"/dev/hda\"), pero si lo prefiere, el cargador de arranque\n"
-"se puede instalar en el segundo disco rígido (\"/dev/hdb\"), o incluso en\n"
-"un disquete (\"/dev/fd0\").\n"
-"\n"
-" * \"Demora antes de arrancar la imagen predeterminada\": cuando vuelve a\n"
-"arrancar la computadora, esta es la demora que se garantiza al usuario para\n"
-"elegir - en el menú del cargador de arranque, una entrada distinta a la\n"
-"predeterminada.\n"
-"\n"
-"!! Tenga presente que si no elige instalar un cargador de arranque\n"
-"(seleccionando \"Cancelar\"), ¡Debe asegurarse que tiene una forma de\n"
-"arrancar a su sistema Mandrake Linux! También debe asegurarse que sabe lo\n"
-"que hace antes de cambiar cualquier opción. !!\n"
-"\n"
-"Haciendo clic sobre el botón \"Avanzadas\" en este diálogo se le ofrecerán\n"
-"muchas opciones avanzadas que están reservadas para el usuario experto.\n"
-"\n"
-"Mandrake Linux instala su propio cargador de arranque, el cual le permite\n"
-"arrancar ya sea GNU/Linux como cualquier otro sistema operativo que puede\n"
-"tener en su sistema.\n"
-"\n"
-"Si hay otro sistema operativo instalado en su máquina, se agregará al mismo\n"
-"automáticamente al menú de arranque. Aquí puede elegir ajustar las opciones\n"
-"existentes. Hacer un doble clic sobre una entrada existente le permite\n"
-"cambiar los parámetros de la misma o quitarla; \"Añadir\" crea una entrada\n"
-"nueva; y \"Hecho\" va al paso de instalación siguiente."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (el LInux LOader) y GRUB son cargadores de arranque: permiten arrancar\n"
-"ya sea GNU/Linux como cualquier otro sistema operativo presente en su\n"
-"computadora. Normalmente, estos otros sistemas operativos se detectan e\n"
-"instalan correctamente. Si este no es el caso, puede añadir una entrada a\n"
-"mano en esta pantalla. Tenga cuidado de elegir los parámetros correctos.\n"
-"\n"
-"También puede no desear dar acceso a estos otros sistemas operativos a\n"
-"cualquiera. En ese caso, puede borrar las entradas correspondientes. Pero\n"
-"entonces, ¡necesitará un disquete de arranque para poder arrancar esos\n"
-"otros sistemas operativos!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Debe indicar donde desea colocar la información necesaria para arrancar en\n"
-"GNU/Linux.\n"
-"\n"
-"A menos que sepa exactamente lo que está haciendo, elija \"Primer sector\n"
-"del disco (MBR)\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Aquí seleccionamos un sistema de impresión para que use su computadora.\n"
-"Otros sistemas operativos pueden ofrecerle uno, pero Mandrake le ofrece\n"
-"tres.\n"
-"\n"
-" * \"pdq\" - que significa \"print, don't queue\", es la elección si Ud.\n"
-"tiene una conexión directa a su impresora y desea evitar el pánico de los\n"
-"papeles trabados, y no tiene impresora en red alguna. Manejará sólo casos\n"
-"de red muy simples y es algo lento para las redes. Elija \"pdq\" si esta es\n"
-"su luna de miel con GNU/Linux. Después de la instalación puede cambiar sus\n"
-"elecciones ejecutando PrinterDrake desde el Centro de Control Mandrake y\n"
-"haciendo clic sobre el botón experto.\n"
-"\n"
-" * \"CUPS\" - \"Common Unix Printing System\" es excelente imprimiendo en "
-"su\n"
-"impresora local y también en la otra punta del planeta. Es simple y puede\n"
-"actuar como servidor o cliente para el sistema de impresión antiguo\n"
-"\"lpd\", por lo que es compatible con los sistemas anteriores. Puede hacer\n"
-"muchas cosas, pero la configuración básica es tan simple como la de\n"
-"\"pdq\". Si necesita que emule a un servidor \"lpd\", debe encender el\n"
-"demonio \"cups-lpd\". Tiene interfaces gráficas para imprimir o elegir las\n"
-"opciones de la impresora.\n"
-"\n"
-" * \"lprNG\" - \"line printer daemon New Generation\". Este sistema puede\n"
-"hacer aproximadamente las mismas cosas que los otros, pero imprimirá en\n"
-"impresoras montadas sobre una red Novell, debido a que soporta el protocolo\n"
-"IPX, y puede imprimir directamente a comandos del shell. Si necesita Novell\n"
-"o imprimir a comandos de sin utilizar tuberías, utilice lprNG. De no ser\n"
-"así, se prefiere a CUPS ya que es más simple y es mejor al trabajar sobre\n"
-"redes."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX ahora está detectando cualquier dispositivo IDE presente en su\n"
-"computadora. También buscará una o más tarjetas SCSI PCI en su sistema. Si\n"
-"se encuentra una tarjeta SCSI DrakX instalará el controlador apropiado\n"
-"automáticamente.\n"
-"\n"
-"Debido a que la detección de hardware a veces no detectará algún hardware\n"
-"DrakX le pedirá que confirme si tiene una tarjeta SCSI PCI. Haga clic sobre\n"
-"\"Sí\" si sabe que hay una tarjeta SCSI instalada en su máquina. Se le\n"
-"presentará una lista de tarjetas SCSI de la cual elegir. Haga clic sobre\n"
-"\"No\" si no tiene hardware SCSI. Si no está seguro puede verificar la\n"
-"lista de hardware detectado en su máquina seleccionando \"Ver información\n"
-"sobre el hardware\" y haciendo clic sobre \"Aceptar\". Examine la lista de\n"
-"hardware y luego haga clic sobre el botón \"Aceptar\" para volver a la\n"
-"pregunta sobre la interfaz SCSI.\n"
-"\n"
-"Si tiene que seleccionar su adaptador manualmente, DrakX le preguntará si\n"
-"desea especificar opciones para el mismo. Debería permitir que DrakX sondee\n"
-"el hardware buscando las opciones específicas que necesita el hardware para\n"
-"inicializarse. Por lo general esto funciona bien.\n"
-"\n"
-"Si DrakX no puede sondear las opciones que deben pasarse, necesitará\n"
-"proporcionar manualmente las opciones al controlador. Por favor revise la\n"
-"\"Guía del Usuario\" (capítulo 3, sección \"Recopilando información acerca\n"
-"de su hardware\") en busca de consejos para recopilar los parámetros\n"
-"necesarios a partir de la documentación del hardware, desde el sitio web\n"
-"del fabricante (si tiene acceso a la Internet) o desde Microsoft Windows\n"
-"(si utilizaba este hardware con Windows en su sistema)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Puede agregar entradas adicionales para yaboot, ya sea para otros sistemas\n"
-"operativos, núcleos alternativos, o para una imagen de arranque de\n"
-"emergencia.\n"
-"\n"
-"Para otros sistemas operativos, la entrada consiste sólo de una etiqueta y\n"
-"la partición raíz.\n"
-"\n"
-"Para Linux, hay algunas opciones posibles:\n"
-"\n"
-" * Etiqueta: esta es simplemente el nombre que deberá teclear en el prompt\n"
-"de yaboot para seleccionar esta opción de arranque.\n"
-"\n"
-" * Imagen: esta debería ser el nombre del núcleo a arrancar. Típicamente,\n"
-"vmlinux o una variación de vmlinux con una extensión.\n"
-"\n"
-" * Raíz: el dispositivo \"root\" o \"/\" para su instalación Linux.\n"
-"\n"
-" * Añadir: la opción de añadir al núcleo se usa bastante sobre el hardware\n"
-"Apple para asistir en la inicialización del hardware de vídeo, o para\n"
-"habilitar la emulación de los botones del ratón con el teclado para los\n"
-"botones 2do y 3ro del ratón que por lo general no tienen los ratones\n"
-"estándar de Apple. Algunos ejemplos son los siguientes:\n"
-"\n"
-"   video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"   video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: esta opción se puede usar o bien para cargar los módulos\n"
-"iniciales, antes que esté disponible el dispositivo de arranque, o bien\n"
-"cargar una imagen de ramdisk para una situación de arranque de emergencia.\n"
-"\n"
-" * Tamaño de Initrd: generalmente el tamaño por defecto del ramdisk es 4096\n"
-"bytes. Puede usar esta opción si necesita asignar un ramdisk mayor.\n"
-"\n"
-" * Lectura-Escritura: normalmente la partición \"root\" se levanta en modo\n"
-"de sólo lectura, para permitir una verificación del sistema de archivos\n"
-"antes que el sistema se levante por completo. Aquí puede cambiar esta\n"
-"opción.\n"
-"\n"
-" * NoVideo: en caso que el hardware de vídeo de Apple sea excepcionalmente\n"
-"problemático, puede seleccionar esta opción para arrancar en el modo\n"
-"\"novideo\", con soporte nativo para el frame-buffer.\n"
-"\n"
-" * Predeterminada: selecciona a esta entrada como la opción Linux por\n"
-"defecto, que se puede elegir simplemente presionando INTRO en el prompt de\n"
-"yaboot. Esta entrada también se marcará con un \"*\", si presiona [Tab]\n"
-"para ver las selecciones del arranque."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"yaboot es un cargador de arranque para el hardware NewWorld MacIntosh. El\n"
-"mismo puede arrancar o GNU/Linux, o MacOS o MacOSX si se encuentran en su\n"
-"computadora. Normalmente, estos sistemas operativos se detectan e instalan\n"
-"correctamente. Si este no es el caso, puede agregar una entrada a mano en\n"
-"esta pantalla. Tenga cuidado de elegir los parámetros correctos.\n"
-"\n"
-"Las opciones principales de yaboot son:\n"
-"\n"
-" * Mensaje de Init: un mensaje de texto simple que se muestra antes del\n"
-"prompt de arranque.\n"
-"\n"
-" * Dispositivo de arranque: indica donde desea colocar la información\n"
-"necesaria para arrancar en GNU/Linux. Generalmente, se configura una\n"
-"partición bootstrap con anterioridad para contener esta información.\n"
-"\n"
-" * Demora de Open Firmware: a diferencia de LILO, hay dos demoras\n"
-"disponibles con yaboot. La primera se mide en segundos y aquí puede elegir\n"
-"entre CD, arranque OF, MacOS o Linux.\n"
-"\n"
-" * Demora de arranque del núcleo: esta demora es similar a la demora de\n"
-"arranque de LILO. Luego de seleccionar Linux, tendrá esta demora en décimas\n"
-"de segundo antes que se seleccione su descripción del núcleo\n"
-"predeterminada.\n"
-"\n"
-" * ¿Habilitar arranque desde el CD?: marcando esta opción Ud. puede elegir\n"
-"\"C\" para el CD en el primer prompt de arranque.\n"
-"\n"
-" * ¿Habilitar arranque OF?: marcando esta opción Ud. puede elegir \"N\" "
-"para\n"
-"Open Firmware en el primer prompt de arranque.\n"
-"\n"
-" * SO predeterminado: puede seleccionar qué sistema operativo arrancará por\n"
-"defecto cuando expira la demora de Open Firmware."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-"Aquí se le presentan varios parámetros que conciernen a su máquina.\n"
-"Dependiendo de su hardware instalado, puede - o no, ver las entradas\n"
-"siguientes:\n"
-"\n"
-" * \"Ratón\": ratón verifique la configuración del ratón y haga clic sobre\n"
-"el botón para cambiarla, si es necesario.\n"
-"\n"
-" * \"Teclado\": teclado verifique la configuración del mapeo del teclado y\n"
-"haga clic sobre el botón para cambiarla, si es necesario.\n"
-"\n"
-" * \"Huso horario\": huso horarioDrakX, de manera predeterminada, adivina "
-"su\n"
-"huso horario a partir del idioma que Ud. ha elegido. Pero nuevamente, al\n"
-"igual que con la elección del teclado, puede ocurrir que no se encuentre en\n"
-"el país que sugiere el idioma elegido. De ser así, puede necesitar hacer\n"
-"clic sobre el botón \"Huso horario\" para configurar el reloj de acuerdo al\n"
-"huso horario en el que se encuentre.\n"
-"\n"
-" * \"Impresora\": al hacer clic sobre el botón \"Sin impresora\" se abrirá\n"
-"el asistente de configuración de la impresora.\n"
-"\n"
-" * \"Tarjeta de sonido\": si se detecta una tarjeta de sonido en su "
-"sistema,\n"
-"la misma se muestra aquí. Durante la instalación no es posible modificación\n"
-"alguna.\n"
-"\n"
-" * \"Tarjeta de TV\": se se detecta una tarjeta de TV en su sistema, la\n"
-"misma se muestra aquí. Durante la instalación no es posible modificación\n"
-"alguna.\n"
-"\n"
-" * \"Tarjeta RDSI\": si se detecta una tarjeta RDSI en su sistema, la misma\n"
-"se muestra aquí. Puede hacer clic sobre el botón para cambiar los\n"
-"parámetros asociados a la misma."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Elija la unidad de disco que desea borrar para instalar su partición\n"
-"Mandrake Linux nueva. Tenga cuidado, ¡se perderán todos los datos de la\n"
-"misma y no se podrán recuperar!."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Haga clic sobre \"Aceptar\" si desea borrar todos los datos y particiones\n"
-"presentes en esta unidad de disco. Tenga cuidado, luego de hacer clic sobre\n"
-"\"Aceptar\", no podrá recuperar los datos y las particiones presentes en\n"
-"esta unidad de disco, incluyendo los datos de Windows.\n"
-"\n"
-"Haga clic sobre \"Cancelar\" para cancelar esta operación sin perder los\n"
-"datos y las particiones presentes en esta unidad de disco."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-"No se puede acceder a los módulos del núcleo correspondientes a su núcleo "
-"(no se encuentra el archivo %s)"
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Ha seleccionado los siguientes servidores: %s\n"
-"\n"
-"\n"
-"Estos servidores se activan por defecto. No se les conocen problemas de\n"
-"seguridad, pero se pueden encontrar problemas nuevos. En ese caso, "
-"debeasegurarse de\n"
-"actualizarlos tan pronto como sea posible.\n"
-"\n"
-"\n"
-"¿Realmente desea instalar estos servidores?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "No se puede usar difusión sin un dominio NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Inserte un disquete formateado con FAT en la disquetera %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Este disquete no está formateado con FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Para utilizar esta selección de paquetes salvada, arranque la instalación "
-"con \"linux defcfg=floppy\""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Error al leer el archivo %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Aceptar"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Algún hardware de su computadora necesita controladores \"propietarios\" "
-"para funcionar.\n"
-"Puede encontrar información sobre ellos en: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Debe tener una partición raíz.\n"
-"Para ello, cree una partición (o haga clic sobre una que ya existe).\n"
-"Luego elija la acción \"Punto de montaje\" y defínalo como '/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Debe tener una partición de intercambio"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"No dispone de una partición de intercambio\n"
-"\n"
-"¿Desea continuar de todas formas?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Debe tener una partición FAT montada en /boot/efi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Usar el espacio libre"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "No hay espacio libre suficiente para asignar las particiones nuevas"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Usar la partición existente"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "No hay ninguna partición existente para usar"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Usar la partición de Windows para loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "¿Qué partición desea usar para Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Elija los tamaños"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Tamaño de la partición raíz en MB: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Tamaño de la partición de intercambio en MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Usar el espacio libre de la partición Windows"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "¿A qué partición desea cambiarle el tamaño?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Calculando los límites del sistema de archivos Windows"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"El redimensionador de tamaño de la FAT no puede gestionar su partición, \n"
-"occurrió el error siguiente: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Su partición Windows está muy fragmentada, por favor primero ejecute \"defrag"
-"\""
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"¡ADVERTENCIA!\n"
-"\n"
-"Ahora DrakX cambiará el tamaño a su partición Windows. Proceda con cuidado:\n"
-"esta operación es peligrosa. Si aún no lo hizo, primero debería salir de\n"
-"la instalación, ejecutar scandisk bajo Windows (y opcionalmente el defrag),\n"
-"y luego volver a iniciar la instalación. También debería hacer una copia de\n"
-" seguridad de sus datos.\n"
-"Cuando esté seguro, pulse sobre \"Aceptar\"."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "¿Qué tamaño desea conservar para windows en la"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "partición %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Falló el redimensionado de la FAT: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"No hay particiones FAT para redimensionar o para usar como loopback (o no "
-"queda espacio suficiente)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Borrar el disco entero"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Quitar Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Tiene más de un disco rígido, ¿sobre cuál desea instalar Linux?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Se perderán TODAS las particiones y sus datos en la unidad  %s"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Particionamiento de disco personalizado"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Usar fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Ahora puede particionar %s.\n"
-"Cuando haya terminado, no se olvide de guardar usando 'w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "No queda espacio libre suficiente en la partición de Windows"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "No se puede encontrar nada de espacio para instalar"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"El asistente de particionamiento de DrakX encontró las siguientes soluciones:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Falló el particionamiento: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Levantando la red"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Bajando la red"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ocurrió un error y no se puede gestionar de forma adecuada.\n"
-"Continúe bajo su propio riesgo."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Punto de montaje %s duplicado"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Algunos paquetes importantes no fueron instalados correctamente.\n"
-"Seguramente su lector de CD o su CD de instalación sean defectuosos.\n"
-"Compruebe el CD de instalación en un sistema ya existente con el comando:\n"
-"  rpm -qpl Mandrake/RPMS/*.rpm\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bienvenido a %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Ninguna disquetera disponible"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entrando en la etapa '%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Elija el tamaño de lo que desea instalar"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Tamaño total: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versión: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tamaño: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Elija los paquetes que desea instalar"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Info"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Instalar"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Instalando"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Espere por favor, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Tiempo restante "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Tiempo total "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Preparando la instalación"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalando el paquete %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "¿Seguir adelante?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Hubo un error al ordenar los paquetes:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "¿Usar la configuración existente para X11?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Su sistema tiene pocos recursos. Puede tener algún problema instalando\n"
-"Mandrake Linux. Si eso ocurre, puede intentar una instalación tipo texto.\n"
-"Para ello, presione 'F1' cuando arranque desde el CDROM, e introduzca 'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Tipo de instalación"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Por favor, elija uno de los siguentes tipos de instalación:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"El tamaño total para los grupos que seleccionó es de aproximadamente %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Si desea instalar un tamaño total inferior,\n"
-"elija el porcentaje de paquetes que desea instalar.\n"
-"\n"
-"Un porcentaje bajo instalará sólo los paquetes más importantes;\n"
-"un porcentaje de 100%% instalará todos los paquetes seleccionados."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Tiene espacio en disco para sólo %d%% de esos paquetes.\n"
-"\n"
-"Si desea instalar menos de esto,\n"
-"elija el porcentaje de paquetes que desea instalar.\n"
-"Un porcentaje bajo instalará sólo los paquetes más importantes;\n"
-"un porcentaje de %d%% instalará todos los que sea posible."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Podrá elegirlos más detalladamente en la etapa siguiente"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Porcentaje de paquetes a instalar"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Selección de grupos de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Selección de paquetes individuales"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tamaño total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Paquete incorrecto"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nombre: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importancia: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"No puede seleccionar este paquete porque no hay espacio suficiente para "
-"instalarlo"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Se van a instalar los siguientes paquetes"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Se van a quitar los siguientes paquetes"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "No puede seleccionar/deseleccionar este paquete"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Este es un paquete obligatorio, no puede desmarcarlo"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "No puede desmarcar este paquete. Ya está instalado"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Se debe actualizar este paquete\n"
-"¿Está seguro que quiere desmarcarlo?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "No puede desmarcar este paquete. Debe ser actualizado"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Mostrar los paquetes seleccionados automáticamente"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Cargar/Guardar en un disquete"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "Actualizando la selección de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "Instalación mínima"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Estimando"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Preparando la instalación. Espere, por favor"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d paquetes"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Importante\n"
-"\n"
-"Haga el favor de leer cuidadosamente el presente documento. En caso de "
-"desacuerdo\n"
-"con el presente documento, no está autorizado a instalar los demás\n"
-"CDs.  En este caso seleccione 'Rechazar' para seguir la instalación sin\n"
-"estos CDs.\n"
-"\n"
-"\n"
-"Algunos componentes de software contenidos en los siguientes CDs no\n"
-"están sometidos a las licencias GPL o similares que permitan la copia,\n"
-"adaptación o redistribución.  Cada uno de los componentes de software\n"
-"esta distribuido bajo los términos y condiciones de un acuerdo de\n"
-"licencia propio. Por favor, dirájase a éste y acéptelo antes de instalarlo,\n"
-"usarlo o redistribuirlo. Generalmente, estas licencias no autorizan la\n"
-"copia (salvo las destinadas a copias de seguridad), la distribución, "
-"decompilación,\n"
-"desensamblado, ingeniería inversa, reconstitución de la lógica del\n"
-"programa y/o modificación, salvo en la medida y para las necesidades\n"
-"autorizadas por las leyes vigentes.  Toda violación de la licencia\n"
-"vigente implica generalmente la caducidad de está, sin perjuicio a\n"
-"todos los demás derechos o acciones dirigidos en contra de Ud. Salvo si\n"
-"el acuerdo de licencia lo autoriza, no puede instalar estos programas\n"
-"en más de una máquina, ni adaptarlos para un uso en red. Si fuese\n"
-"necesario, contacte con el distribuidor de cada programa para\n"
-"obtener licencias adicionales. La distribución a terceros de copias de\n"
-"los programas o de la documentación que lo acompaña generalmente\n"
-"suele estar prohibida.\n"
-"\n"
-"\n"
-"Todos los derechos, títulos e intereses de esos programas son la\n"
-"propiedad exclusiva de sus autores respectivos y están protegidos por el\n"
-"derecho de la propiedad intelectual y otras leyes aplicables al derecho\n"
-"del software.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Aceptar"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Rechazar"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"¡Cambie su CD-ROM!\n"
-"\n"
-"Inserte el CD-ROM etiquetado como \"%s\" en la unidad y pulse Aceptar cuando "
-"lo  haya hecho.\n"
-"Si no lo posee, pulse Cancelar para cancelar la instalación desde este CD-"
-"ROM."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Hubo un error al instalar los paquetes:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Ocurrió un error"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Acuerdo de licencia"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"EL PRESENTE TEXTO ES UNA TRADUCCIÓN A PROPÓSITO EXCLUSIVAMENTE\n"
-"INFORMATIVO DE LOS TÉRMINOS DE LA LICENCIA DE MANDRAKE LINUX. EN\n"
-"NINGÚN CASO LA PRESENTE TRADUCCIÓN TIENE VALOR LEGAL SIENDO OFICIAL\n"
-"EXCLUSIVAMENTE LA VERSIÓN EN FRANCÉS DE LA LICENCIA DE LINUX-MANDRAKE.\n"
-"No obstante, esperamos que esta traducción ayudará a los que hablan\n"
-"castellano a entenderla mejor.\n"
-"\n"
-"\n"
-"Introducción\n"
-"\n"
-"El conjunto de elementos que incluye el sistema operativo y los\n"
-"diferentes componentes disponibles en la distribución Mandrake Linux\n"
-"se denominarán en adelante \"Programas\". Los programas incluyen en\n"
-"particular, pero de manera no limitativa, el conjunto de programas,\n"
-"procedimientos, reglas y documentaciones relativas al sistema\n"
-"operativo y a los diferentes componentes de la distribución\n"
-"Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Licencia\n"
-"\n"
-"Le rogamos leer cuidadosamente este documento. Éste constituye un\n"
-"contrato de licencia entre Ud. (persona física o persona moral) y\n"
-"MandrakeSoft S.A. aplicado a los programas.  El hecho de instalar, \n"
-"duplicar o usar los programas de cualquier manera, indica\n"
-"que acepta explícitamente los términos y condiciones de esta licencia\n"
-"y que está totalmente de acuerdo en lo referente a los términos de la "
-"misma.\n"
-"En caso de no estar de acuerdo con el presente documento, no está\n"
-"autorizado a instalar, duplicar ni usar de ninguna manera\n"
-"este producto. El contrato de licencia sera automáticamente anulado\n"
-"sin aviso previo en el caso que no se cumplan las disposiciones\n"
-"de este documento. En caso de anulación Ud. tendrá que anular\n"
-"inmediatamente todo ejemplar y todas las copias de todos los programas\n"
-"y de todas las documentaciones que constituyen el sistema operativo y\n"
-"los diferentes componentes disponibles en en la distribución\n"
-"Mandrake Linux.\n"
-"\n"
-"\n"
-"2. Garantía y limitaciones de garantía\n"
-"\n"
-"Los programas y la documentación que los acompaña son proporcionados\n"
-"tal cual y sin ninguna garantía.  MandrakeSoft S.A.\n"
-"no se responsabiliza de las consecuencias de un daño directo,\n"
-"especial, indirecto o accesorio, de cualquiera naturaleza que sea, en\n"
-"relación con la utilización de los programas, en particular y de\n"
-"manera no limitada, todos daños resultados por perdidas de\n"
-"beneficio, interrupción de actividad, pérdida de informaciones\n"
-"comerciales u otras perdidas financieras, así que por eventuales\n"
-"condenaciones e indemnizaciones debidas como consecuencia de una decisión "
-"de\n"
-"la justicia, y eso incluso si MandrakeSoft S.A. hubiera sido informada de "
-"la\n"
-"aparición o eventualidad de tales daños.\n"
-"\n"
-"ADVERTENCIA EN CUANTO A LA POSESIÓN O USO DE PROGRAMAS PROHIBIDOS\n"
-"EN CIERTOS PAÍSES\n"
-"\n"
-"En ningún caso, ni MandrakeSoft S.A. ni sus proveedores podrán ser\n"
-"responsabilizados por un perjuicio especial, directo, indirecto o\n"
-"accesorio, de cualquier naturaleza (en particular y de manera\n"
-"no limitada, pérdidas de beneficio, interrupción de actividad,\n"
-"pérdida de informaciones comerciales u otras pérdidas financieras, así\n"
-"como por posibles condenaciones e indemnizaciones debidas\n"
-"consecuentes a una decisión de justicia) que resultaría de la\n"
-"utilización, detención o simple descarga desde uno de los sitios de\n"
-"transferencia de Mandrake Linux de programas prohibidos por la\n"
-"legislación a la que está sometido. Esta advertencia se aplica en\n"
-"particular a algunos componentes de criptografía fuerte incluídos en los\n"
-"programas.\n"
-"\n"
-"\n"
-"3. Licencia GPL y otras licencias\n"
-"\n"
-"Los Programas están constituidos por módulos de programas creados por\n"
-"diversas personas (físicas o legales). Muchos de ellos se\n"
-"distribuyen bajo los términos de la Licencia Pública General GNU\n"
-"(denominada a partir de ahora \"GPL\") u otras licencias parecidas. La "
-"mayoría\n"
-"de estas licencias le permiten copiar, adaptar o redistribuir los\n"
-"módulos de los programas que cubren.  Haga el favor de leer y de aceptar los "
-"términos y\n"
-"condiciones de las licencias que acompañan a cada uno de ellos antes de\n"
-"usarlos. Toda pregunta relativa a la licencia se debe dirigir al autor\n"
-"(o su representante) de dicho programa, y no a MandrakeSoft.  Los\n"
-"programas desarrollados por MandrakeSoft están sometidos a la licencia\n"
-"GPL.  La documentación escrita por MandrakeSoft esta sometida a una\n"
-"licencia especifica.  Haga el favor de dirigirse a la documentación para\n"
-"obtener más información.\n"
-"\n"
-"\n"
-"4. Propiedad intelectual\n"
-"\n"
-"Todos los derechos, títulos e intereses de los diferentes programas\n"
-"son propiedad exclusiva de sus autores respectivos y están protegidos\n"
-"por el derecho de la propiedad intelectual y otras leyes aplicadas a los\n"
-"derechos de los programas.  Las marcas \"Mandrake\" y \"Mandrake Linux\" "
-"así\n"
-"como los logótipos asociados son registrados por MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. Disposiciones diversas\n"
-" \n"
-"Si alguna disposición de este contrato de licencia fuera declarada\n"
-"nula, ilegal o inaplicable por un tribunal competente, esta\n"
-"disposición sería excluida del presente contrato.  Sin embargo\n"
-"Ud. seguirá sometido a las otras disposiciones, que tendrán\n"
-"plenos efectos.  El contrato de licencia está regido por las leyes\n"
-"francesas. Toda disputa relativa a los presentes términos será\n"
-"resuelta, preferentemente, por vía amigable.  En caso de desacuerdo con\n"
-"MandrakeSoft S.A., el litigio será tramitado a los tribunales\n"
-"competentes de París, Francia.  Para cualquier pregunta relacionada con\n"
-"este documento, por favor, póngase en contacto con MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teclado"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Seleccione la distribución de su teclado."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Aquí tiene la lista completa de teclados disponibles"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "¿Qué tipo de instalación desea?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Instalación/Actualización"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "¿Es una instalación o una actualización?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Recomendada"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Experto"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Actualización"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Seleccione el tipo de su ratón, por favor."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Puerto del ratón"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Seleccione el puerto serie al que está conectado el ratón, por favor."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Emulación de los botones"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Emulación del botón 2"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Emulación del botón 3"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Configurando tarjetas PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Configurando dispositivos IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "no hay particiones disponibles"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Rastreando las particiones para encontrar los puntos de montaje"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Seleccione los puntos de montaje"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"No se puede leer su tabla de particiones, está demasiado deteriorada :(\n"
-"Se intentará seguir y vaciar las particiones malas (¡se perderán TODOS LOS "
-"DATOS!).\n"
-"La otra solución es no permitir que DrakX modifique la tabla de "
-"particiones.\n"
-"(el error es %s)\n"
-"\n"
-"¿Está de acuerdo en perder todas las particiones?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake no pudo leer correctamente la tabla de particiones.\n"
-"¡Continúe bajo su propio riesgo!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"¡No hay 1MB de espacio para bootstrap! La instalación continuará, pero para "
-"arrancar su sistema, necesitará crear la partición bootstrap en DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "No se encontró partición raíz para efectuar la actualización"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Partición raíz"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "¿Cual es la partición raíz (/) de su sistema?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Necesita reiniciar el equipo para que se efectúe la modificación de la tabla "
-"de particiones"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Elija las particiones que desea formatear"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "¿Verificar el disco en busca de bloques malos?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Formateando las particiones"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Creando y formateando el archivo %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Espacio de intercambio insuficiente para completar la instalación, añada un "
-"poco más"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Buscando los paquetes disponibles"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Encontrando los paquetes a actualizar"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Su sistema no tiene espacio suficiente para instalar o actualizar (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completa (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Mínima (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomendada (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Personalizada"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Por favor, seleccione cargar o guardar la selección de paquetes en "
-"disquete.\n"
-"El formato es el mismo que los disquetes generados para la instalación "
-"automática."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Cargar desde un disquete"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Cargando desde un disquete"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Selección de paquetes"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "Introduzca un disquete que contenga la selección de paquetes"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Guardar en un disquete"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "El tamaño seleccionado es mayor que el disponible"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Si tiene todos los CDs de la lista siguiente, haga clic sobre \"Aceptar\".\n"
-"Si no tiene ningún CD, haga clic sobre \"Cancelar\".\n"
-"Si sólo le faltan algunos CDs, desmárquelos y haga clic sobre \"Aceptar\"."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM etiquetado como \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalando el paquete %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Configuración posterior a la instalación"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Por favor, inserte el disquete de arranque en la unidad %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Por favor, inserte el disquete de módulos actualizados en la unidad %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Ahora tiene la posibilidad de bajar por la red paquetes específicos\n"
-"durante el procedimiento de instalación, incuídos programas de cifrado.\n"
-"\n"
-"ADVERTENCIA:\n"
-"\n"
-"Debido a las diferencias de los requisitos aplicables a ese tipo de\n"
-"programas por las distintas jurisdicciones, es el cliente y/o el usuario "
-"final\n"
-"de dichos programas quien debe verificar que las leyes de su jurisdicción "
-"le\n"
-"permitan bajar, guardar y/o utilizar dichos programas.\n"
-"\n"
-"En particular el cliente y/o usuario final debe tener un cuidado especial\n"
-"de no violar las leyes de su de su jurisdicción. En el caso de que el "
-"cliente y/o\n"
-"el usuario final no respetase las condiciones de las leyes que le son\n"
-"aplicables, es posible que sea severamente sancionado por la ley.\n"
-"\n"
-"En ningún caso MandrakeSoft ni ninguno de sus fabricantes y/o\n"
-"distribuidores se puede considerar responsanble por daños especiales, "
-"directos\n"
-"o inderectos de cualquier tipo (incluyendo, pero sin limitarse a ello, "
-"pérdida\n"
-"de beneficios, ruptura de negocios, pérdida de datos comerciales u otras\n"
-"pérdidas pecuniarias, o eventuales responsabilidades e indemnizaciones\n"
-"a pagar debido a decisiones de la justicia) que puedan ocurrir mediante el\n"
-"uso, posesión o el sólo hecho de descargar de Internet o por otro medio, "
-"programas\n"
-"a los cuales el cliente y/o usuario final tenga accesso después de haber\n"
-"firmado el presente convenio.\n"
-"\n"
-"Para preguntas relativas a este convenio, póngase en contacto con\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Elija un sitio de réplica del que bajar los paquetes"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Contactando con el sitio de réplica para obtener la lista de los paquetes "
-"disponibles"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Elija los paquetes que desea instalar"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "¿Cuál es su zona horaria?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "Reloj interno puesto a GMT"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Sincronización automática de tiempo (usando NTP)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "Servidor NTP"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Sin impresora"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Resumen"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Ratón"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Zona horaria"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Impresora"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "Tarjeta RDSI"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Tarjeta de sonido"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "Tarjeta de TV"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Archivos locales"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Contraseña de root"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Sin contraseña"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Esta contraseña es demasiado simple\n"
-"(tiene que tener por lo menos una longitud de %d caracteres)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Autentificación"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "Autentificación LDAP"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "Servidor LDAP"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "Autentificación NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "Dominio NIS"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Un disquete de arranque personalizado da la posibilidad de arrancar su "
-"equipo\n"
-"bajo Linux sin depender del cargador de arranque normal. Esto puede ser "
-"útil\n"
-"si no desea instalar SILO en su sistema, o si cualquier otro sistema "
-"operativo borra\n"
-"SILO, o si SILO no funciona con su configuración de hardware. Un disquete\n"
-"de arranque personalizado también se puede usar con la imagen de rescate de\n"
-" Mandrake haciendo así mucho más fácil la recuperación en caso de fallo\n"
-"grave del sistema.\n"
-"\n"
-"Si desea crear un disquete de arranque para su sistema, inserte un disquete\n"
-"en la primer disquetera y presione \"Aceptar\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Primera disquetera"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Segunda disquetera"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Omitir"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Un disquete de arranque personalizado da la posibilidad de arrancar su "
-"equipo\n"
-"bajo Linux sin depender del cargador de arranque normal. Esto puede ser "
-"útil\n"
-"si no desea instalar LILO (o grub) en su sistema, o si cualquier otro "
-"sistema operativo borra\n"
-"LILO, o si LILO no funciona con su configuración de hardware. Un disquete\n"
-"de arranque personalizado también se puede usar con la imagen de rescate de\n"
-"Mandrake haciendo así mucho más fácil la recuperación en caso de fallo\n"
-"grave del sistema. ¿Desea crear un disquete de arranque para su sistema?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Disculpe, pero no hay ninguna disquetera disponible"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Elija la disquetera que desea usar para crear el disco de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Inserte un disquete en la disquetera %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Creando el disquete de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Preparando el cargador de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Parece que tiene una máquina desconocida o demasiado\n"
-"antigua. El gestor de arranque yaboot no funcionará.\n"
-"La instalación continuará, pero necesitará\n"
-"utilizar BootX para arrancar su máquina."
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "¿Desea usar aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Ocurrió un error al instalar aboot, \n"
-"¿desea forzar la instalación incluso si ello implicara la destrucción de la "
-"primera partición?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-msgid "Installing bootloader"
-msgstr "Instalando cargador de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Falló la instalación del cargador de arranque. Ocurrió el siguiente error:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Puede necesitar cambiar el dispositivo de arranque de Open Firmware para\n"
-" activar el cargador de arranque. Si no ve el prompt del cargador de\n"
-" arranque al reiniciar, mantenga presionado Command-Option-O-F al\n"
-" reiniciar e introduzca:\n"
-" setenv boot-device %s, \\\\:tbxi\n"
-" Luego escriba: shut-down\n"
-"La próxima vez que arranque debería ver el prompt del cargador de arranque."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Baja"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Media"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Alta"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Elegir el nivel de seguridad"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Inserte un disquete en blanco en la unidad %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Creando el disquete de instalación automática"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Algunas de las etapas no fueron completadas.\n"
-"\n"
-"¿Realmente desea salir ahora?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Felicidades, la instalación ha concluido.\n"
-"Extraiga el disco de arranque de la unidad y presione intro para reiniciar.\n"
-"\n"
-"Para obtener información sobre correcciones disponibles para esta versión\n"
-"de Mandrake Linux, consulte el archivo de erratas disponible en\n"
-"http://www.mandrakelinux.com.\n"
-"\n"
-"Hay información disponible sobre cómo configurar su sistema en el capítulo "
-"de\n"
-"configuración tras la instalación de la guía de usuario oficial de Mandrake "
-"Linux."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Generar un disquete de instalación automática"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"La instalación automática puede automatizarse por completo si lo desea,\n"
-"¡¡en ese caso se adueñará del disco rígido!!\n"
-"(la intención de esto es instalarlo en otro ordenador).\n"
-"\n"
-"Puede preferir reproducir la instalación.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automatizada"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Reproducir"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Guardar la selección de paquetes"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalación %s de Mandrake Linux"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> entre elementos  | <espacio> seleccionar | <F12> pantalla "
-"sig. "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "no se encuentra kdesu"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "Elija un archivo"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Avanzada"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Espere, por favor"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Expandir el árbol"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Contraer el árbol"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Cambiar entre vista plana y ordenada por grupos"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Ambigüedad (%s), sea más preciso\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Elección incorrecta, inténtelo de nuevo\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (por defecto %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "¿Su elección? (por defecto %s)"
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "¿Su elección? (por defecto %s, teclee `none' para ninguno) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Checo (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Alemán"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Español"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Finlandés"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Francés"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Noruego"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Polaco"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Ruso"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Sueco"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Británico"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "Estadounidense"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Albano"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armenio (antiguo)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armenio (nuevo)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armenio (fonético)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbadján (latín)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Búlgaro"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasileño (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Bielorruso"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Suizo (germánico)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Suizo (francés)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Checo (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Alemán (sin teclas muertas)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Danés"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noruego)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estonio"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiano (estilo \"ruso\")"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiano (estilo \"latín\")"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Griego"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Húngaro"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Israelí"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Israelí (fonético)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iraní"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islandés"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Italiano"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japonés de 106 teclas"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Coreano"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latinoamericano"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituano AZERTY (antiguo)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituano AZERTY (nuevo)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituano \"numérico\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituano \"fonético\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-msgid "Latvian"
-msgstr "Letón"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Macedonio"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Holandés"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Polaco (distribución qwerty)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Polaco (distribución qwertz)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugués"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Canadiense (Quebec)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Rumano (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Rumano (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Ruso (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Esloveno"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovaco (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovaco (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "Serbio (cirílico)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Tailandés"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr "Teclado tajik"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turco (modelo \"F\" tradicional)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turco (modelo \"Q\" moderno)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ucraniano"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "Estadounidense (internacional)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"numérico\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavo (latín)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Montajes circulares %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Quite los volúmenes lógicos primero\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Ratón Sun"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Estándar"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Ratón genérico PS2 con rueda"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 botón"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Genérico"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Rueda"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "serie"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Ratón de 2 botones genérico"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Ratón de 3 botones genérico"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Ratón Logitech (serie, antiguo tipo C7)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "ratón bus"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 botones"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 botones"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "ninguno"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Sin ratón"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Pruebe su ratón, por favor."
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Para activar el ratón,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "¡MUEVA SU RUEDA!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Finalizar"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Siguiente ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "¿Es correcto?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Conectar a Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"La forma más común de conexión ADSL es con pppoe.\n"
-"Algunas conexiones usan pptp, otras pocas usan dhcp.\n"
-"Si no lo sabe con seguridad, elija 'usar pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "usar dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "usar pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "usar pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"¿Qué cliente dhcp desea utilizar?\n"
-"dhcpcd es el predeterminado"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"No se ha detectado ningún adaptador de red ethernet en su sistema.\n"
-"No se puede configurar este tipo de conexión."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Elija la interfaz de red"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Por favor, elija el adaptador de red que desea usar para conectarse a "
-"Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "no se encontró ninguna tarjeta de red"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Configurando la red"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Por favor introduzca el nombre de su máquina (host) si lo conoce.\n"
-"Algunos servidores DHCP necesitan del nombre de la máquina para funcionar.\n"
-"El nombre de su máquina debería ser un nombre de máquina clasificado "
-"completamente,\n"
-"como \"mimaquina.milabo.micompa.com\"."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Nombre de la máquina"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Asistente para la configuración de la red"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Módem RDSI externo"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Tarjeta RDSI interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "¿De qué tipo es su conexión RDSI?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"¿Qué configuración de RDSI prefiere?\n"
-"\n"
-"* La configuración antigua utiliza isdn4net. Tiene herramientas\n"
-"  poderosas, pero es algo complicada de configurar para un recién \n"
-"  llegado, y no es estándar.\n"
-"* La configuración nueva es más fácil de entender, más estándar,\n"
-"  pero con menos herramientas.\n"
-"\n"
-"Le recomendamos la configuración ligera (esto es, la nueva).\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Configuración nueva (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Configuración antigua (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "Configuración de RDSI"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Seleccione su proveedor.\n"
-" Si no está en la lista, elija No listado"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "Protocolo de Europa"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "Protocolo de Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "Protocolo para el resto del mundo"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protocolo para el resto del mundo \n"
-" sin canal D (líneas alquiladas)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "¿Qué protocolo desea utilizar?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "¿Qué tipo de tarjeta tiene?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "No lo sé"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Si tiene una tarjeta ISA, los valores de la próxima pantalla deberían ser "
-"correctos.\n"
-"\n"
-"Si tiene una tarjeta PCMCIA, tiene que saber la irq y la e/s de su tarjeta.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Abortar"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Continuar"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "¿Cuál es su tarjeta RDSI?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Se ha detectado una tarjeta RDSI PCI, pero no se conoce el tipo. Por favor, "
-"seleccione una tarjeta PCI en la pantalla siguiente."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"No se encontró tarjeta PCI RDSI. Por favor, seleccione una en la pantalla "
-"siguiente."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Seleccione el puerto serie al que está conectado su módem."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Opciones de llamada por módem"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Nombre de la conexión"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Número de teléfono"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "ID de conexión"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Por script"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Por terminal"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Nombre de dominio"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Primer servidor DNS (opcional)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Segundo servidor DNS (opcional)"
-
-# ../../netconnect.pm_.c:567msgid ""
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Puede desconectarse o volver a configurar su conexión."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Puede volver a configurar su conexión."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Ahora está conectado a Internet."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Se puede conectar a Internet o volver a configurar su conexión."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Ahora no está conectado a Internet."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Conectar a Internet"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Desconectar de Internet"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Configurar la conexión a la red (local o Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Configuración y conexión a Internet"
-
-# ../../netconnect.pm_.c:567msgid ""
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ahora vamos a configurar la conexión %s."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Ahora vamos a configurar la conexión %s.\n"
-"\n"
-"\n"
-"Pulse siguiente para continuar."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Configuración de la red"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Puesto que está realizando una instalación por red, su red ya está "
-"configurada.\n"
-"Haga clic sobre aceptar para mantener su configuración, o pulse cancelar "
-"para\n"
-"volver a configurar sus conexiones de red y a Internet.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Bienvenido al asistente para la configuración de la red\n"
-"\n"
-"Estamos a punto de configurar su conexión de red/Internet.\n"
-"Si no desea usar la detección automática, deseleccione la casilla.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Elija el perfil a configurar"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Usar detección automática"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Detectando los dispositivos..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Conexión normal por módem"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "detectada en el puerto %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "Conexión RDSI"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "detectada %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "Conexión ADSL"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "detectada en la interfaz %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Conexión por cable"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "detectada conexión por cable"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "Conexión a la red local"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "tarjeta(s) de red detectada(s)"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Elija la conexión que desea configurar"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Ha configurado múltiples formas de conectarse a Internet.\n"
-"Seleccione la que quiere utilizar.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Conexión a Internet"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "¿Desea iniciar su conexión al arrancar?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Configuración de la red"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr "La red necesita ser reiniciada"
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Ocurrió un problema mientras se reiniciaba la red: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Felicidades, la configuración de la red y de Internet ha terminado.\n"
-"\n"
-"Ahora se aplicará la configuración a su sistema.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Después de esto, se recomienda que reinicie su entorno X\n"
-"para evitar el problema del cambio del nombre de la máquina."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ADVERTENCIA: Previamente se ha configurado este dispositivo para conectarse "
-"con Internet.\n"
-"Simplemente acepte para mantener la configuración del dispositivo.\n"
-"Al modificar los campos de abajo se ignorará esta configuración."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Por favor, introduzca la dirección IP de esta máquina.\n"
-"Cada valor tiene que introducirse como una dirección IP en notación\n"
-"decimal con puntos (por ejemplo: 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Configurando el dispositivo de red %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (controlador %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "Dirección IP"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Máscara de red"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Dirección IP automática"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Las direcciones IP deben estar en el formato 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Por favor, defina el nombre de su máquina.\n"
-"El nombre de su máquina debería ser un nombre de máquina clasificado "
-"completamente,\n"
-"como \"mimaquina.milabo.micompa.com\".También puede introducir la dirección "
-"IP de la pasarela si tiene una"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "Servidor DNS"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Pasarela"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Dispositivo de pasarela de red"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Configuración de los proxies"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr "Id tarjeta de red (útil para portátiles)"
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "El nombre del proxy debe ser http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "El nombre del proxy debe ser ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Configuración de Internet"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "¿Desea intentar conectarse a Internet ahora?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Probando su conexión..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Ahora no está conectado a Internet."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Por motivos de seguridad, ahora será desconectado."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"El sistema no parece estar conectado al Internet.\n"
-"Intente volver a configurar su conexión."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Configuración de la conexión"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Por favor, complete o verifique el campo de abajo"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ de la tarjeta"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Mem (DMA) de la tarjeta"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "E/S de la tarjeta"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "E/S_0 de la tarjeta"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "E/S_1 de la tarjeta"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Su número de teléfono personal"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Nombre del proveedor (ej proveedor.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Número de teléfono del proveedor"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 del proveedor (opcional)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 del proveedor (opcional)"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "Elija su país"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Modo de marcación"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Velocidad de la conexión"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "Demora de la conexión (en seg)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Usuario de la cuenta (nombre de usuario)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Contraseña de la cuenta"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "La partición extendida no está disponible en esta plataforma"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Tiene un hueco en la tabla de particiones, pero no se puede usar.\n"
-"La única solución es desplazar sus particiones primarias para que el hueco "
-"esté después de las particiones extendidas"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Falló la restauración a partir del archivo %s: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Archivo de respaldo incorrecto"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Error al escribir en el archivo %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Está ocurriendo algo malo en su disco. \n"
-"Ha fallado una prueba para verificar la integridad de los datos. \n"
-"Esto significa que escribir cualquier cosa en el disco terminará produciendo "
-"basura al azar"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "necesario"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "importante"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "muy bueno"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bueno"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "quizás"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-"CUPS - Common Unix Printing System (Sistema de impresión común de Unix)"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR de nueva generación"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon (Demonio de impresora de líneas)"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue (Imprimir, no encolar)"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Impresora local"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Impresora remota"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "Impresora en un servidor CUPS remoto"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "Impresora en un servidor lpd remoto"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Impresora de red (socket)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Impresora en un servidor SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "Impresora en un servidor NetWare"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "Introduzca el URI del dispositivo de impresión"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "Filtrar el trabajo en un comando"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "Modelo desconocido"
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr "Impresora \"en crudo\" (sin controlador)"
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(en %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "(en esta máquina)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Seleccione la conexión de la impresora"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "¿Como está conectada la impresora?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"Las impresoras de los servidores CUPS remotos no se configuran\n"
-"aquí; estas impresoras se detectarán automáticamente. Por favor\n"
-"seleccione \"Impresora en un servidor CUPS remoto\" en este caso."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Ninguno"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-msgid "Choose a default printer!"
-msgstr "¡Seleccione una impresora por defecto!"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-"Con servidores CUPS remotos, no tiene que configurar impresora \n"
-"alguna aquí; los servidores CUPS informan automáticamente a su máquina\n"
-"sobre sus impresoras. En el campo \"Impresora predeterminada\" se listan\n"
-"todas las impresoras que su máquina conoce. Elija la impresora\n"
-"predeterminada para su máquina allí y haga clic sobre el botón\n"
-"\"Aplicar/Re-leer impresoras\". Haga clic sobre el mismo botón para\n"
-"refrescar la lista (puede tomar hasta 30 segs. luego del inicio de CUPS\n"
-"hasta que estén visibles todas las impresoras remotas).\n"
-"Cuando su servidor CUPS está en una red diferente, debe proporcionar la\n"
-"dirección IP del servidor CUPS y, opcionalmente, el número de puerto para\n"
-"obtener la información de la impresora desde el servidor, de lo contrario,\n"
-"deje estos campos en blanco."
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalmente, CUPS se configura automáticamente de acuerdo con su\n"
-"entorno de red, para que pueda acceder a las impresoras de los\n"
-"servidores CUPS de su red local. Si esto no funciona correctamente,\n"
-"desactive la \"Configuración automática de CUPS\" y edite manualmente\n"
-"su archivo /etc/cups/cupsd.conf. No olvide reiniciar CUPS tras esto\n"
-"(comando: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Cerrar"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "Aplicar/Re-leer impresoras"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Las direcciones IP deberían parecerse a 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "¡El número de puerto debe ser un número entero!"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "Impresora predeterminada"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "IP del servidor CUPS"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Puerto"
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr "Configuración automática de CUPS"
-
-#: ../../printerdrake.pm_.c:217
-msgid "Detecting devices ..."
-msgstr "Detectando dispositivos..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Probar puertos"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Se detectó una impresora, modelo \"%s\", en "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Dispositivo de impresión local"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"¿A qué dispositivo está conectada su impresora\n"
-"(tenga en cuenta que /dev/lp0 es equivalente a LPT1:)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Dispositivo de impresión"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "¡No se encuentra el nombre del dispositivo/fichero!"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-msgid "Reading printer database ..."
-msgstr "Leyendo los datos de la impresora ..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Opciones de la impresora remota lpd"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Para utilizar una cola de impresión remota lpd, es necesario\n"
-"que indique el nombre del host del servidor de impresión y el nombre\n"
-"de la impresora en ese servidor."
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "Nombre del host del servidor remoto"
-
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "Nombre de la impresora remota"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "¡Falta el nombre del host remoto!"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "¡Falta el nombre de la impresora remota!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opciones de la impresora SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Para imprimir en una impresora SMB, es necesario escribir el\n"
-"nombre del servidor SMB (que no siempre es el mismo que el nombre de\n"
-"la máquina en TCP/IP) y posiblemente la dirección IP del servidor de\n"
-"impresión, así como el nombre del recurso compartido para la impresora\n"
-"que se quiere usar y cualquier otra información del nombre de usuario,\n"
-"contraseña y grupo de trabajo que haga falta."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "Máquina del servidor SMB"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "IP del servidor SMB"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Nombre del recurso compartido"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Grupo de trabajo"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "¡Debe indicar el nombre o la dirección IP del servidor!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "¡No se encuentra el nombre del recurso compartido de Samba!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "Opciones de la impresora NetWare"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Para imprimir en una impresora NetWare, es necesario escribir el nombre\n"
-"del servidor de impresión NetWare (que no siempre es el mismo que\n"
-"el nombre de la máquina en TCP/IP) así como el nombre de la cola\n"
-"de impresión que desea usar y el nombre de usuario y la contraseña "
-"apropiados."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Servidor de impresión"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Nombre de la cola de impresión"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "¡No se encuentra el nombre del servidor NCP!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "¡No se encuentra la cola del servidor NCP!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Opciones de la impresora por socket"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Para imprimir en una impresora por socket, necesita proporcionar\n"
-"el nombre de host de la impresora y opcionalmente el número de puerto.\n"
-"En servidores HP JetDirect el número de puerto por lo general es 9100,\n"
-"en otros servidores puede variar. Consulte el manual de su hardware."
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "Nombre de host de la impresora"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "¡No se encuentra el nombre de la máquina de la impresora!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "URI del dispositivo de impresión"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Puede especificar directamente el URI para acceder a la impresora. El URI "
-"debe cumplir con las especificaciones Foomatic o CUPS. Recuerde que no todos "
-"los sistemas de impresión admiten URIs."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "¡Debe introducir un URI válido!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Cada impresora necesita un nombre (por ejemplo, lp).\n"
-"No tiene por qué rellenar los campos de descripción ni\n"
-"ubicación. Sólo son comentarios para los usuarios."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Nombre de la impresora"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Descripción"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Ubicación"
-
-#: ../../printerdrake.pm_.c:701
-msgid "Preparing printer database ..."
-msgstr "Preparando base de datos de impresoras ..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "Selección del modelo de impresora"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "¿Qué modelo de impresora tiene?"
-
-#: ../../printerdrake.pm_.c:866
-msgid "OKI winprinter configuration"
-msgstr "Configuración de impresora de windows OKI"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-"Va a configurar una impresora de windows láser OKI. Estas\n"
-"impresoras utilizan un protocolo de comunicación muy especial\n"
-"y sólo funcionan cuando se conectan al primer puerto paralelo.\n"
-"Si su impresora está conectada a otro puerto o a un servidor\n"
-"de impresión, por favor, conéctela al primer puerto paralelo\n"
-"antes de imprimir una página de prueba. En otro caso, la\n"
-"impresora no funcionará. El controlador ignorará la configuración\n"
-"del tipo de conexión."
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-msgid "Lexmark inkjet configuration"
-msgstr "Configuración de impresora de inyección de tinta Lexmark"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-"Los controladores de impresión de inkjet que proporciona Lexmark\n"
-"sólo admiten impresoras locales, no impresoras en máquinas\n"
-"remotas o servidores de impresión. Por favor, conecte su impresora\n"
-"a un puerto local o configúrelo en la máquina a la que está\n"
-"conectada."
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-"Para permitir imprimir con su impresora de inyección de\n"
-"tinta Lexmark y esta configuración, necesita los controladores\n"
-"de impresoras de inyección de tinta proporcionados por\n"
-"Lexmark (http://www.lexmark.com/). Vaya al sitio de EEUU\n"
-"y haga clic en el botón \"Drivers\". Luego, seleccione su\n"
-"modelo y posteriormente \"Linux\" como sistema operativo.\n"
-"Los controladores vienen vienen como paquetes RPM o como\n"
-"scripts de la shell con instalación gráfica interactiva.\n"
-"No necesita hacer esta configuración con los interfaces\n"
-"gráficos. Cancele directamente tras el acuerdo de licencia.\n"
-"Luego imprima páginas alineadas con la cabeza de impresión\n"
-"\"lexmarkmaintain\" y ajuste la configuración de la\n"
-"alineación de la cabeza con este programa."
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"Configuraciones predeterminadas de la impresora\n"
-"Debería asegurarse que el tamaño de página y el\n"
-"tipo de tinta (si corresponde) sean adecuados.\n"
-"Note que una calidad de impresión extremadamente\n"
-"alta puede ser bastante lenta."
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "¡La opción %s debe ser un número entero!"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "¡La opción %s debe ser un número!"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "¡La opción %s está fuera de rango"
-
-#: ../../printerdrake.pm_.c:1136
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"¿Quiere configurar esta impresora (\"%s\")\n"
-"como la impresora predeterminada?"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "Páginas de prueba"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"Por favor, selecciones las páginas de prueba que quiere imprimir.\n"
-"Aviso: la página de prueba de foto puede tardar mucho tiempo en ser impresa\n"
-"e incluso en impresoras láser con muy poca memoria puede que no salga.\n"
-"En la mayoría de los casos, basta con imprimir la página de prueba estándar."
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "No hay páginas de prueba"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "Imprimir"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "Página de prueba estándar"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr "Página de prueba alternativa (Letter)"
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr "Página de prueba alternativa (A4)"
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "Página de prueba de foto"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Imprimir la(s) página(s) de prueba..."
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"La(s) página(s) de prueba se enviaron a la impresora.\n"
-"Puede que pase algo de tiempo antes de que comience la impresión.\n"
-"Estado de la impresión:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"La(s) página(s) de prueba se enviaron al demonio de impresión.\n"
-"Puede que pase algo de tiempo antes de que comience la impresión.\n"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "¿Funcionó adecuadamente?"
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-msgid "Raw printer"
-msgstr "Impresora en crudo"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Para imprimir un archivo desde la línea de comando (ventana de terminal) "
-"utilice el comando \"%s <archivo>\" o una herramienta de impresión gráfica: "
-"\"xpp <archivo>\" o \"qtcups <archivo>\". Las herramientas gráficas le "
-"permiten seleccionar la impresora y modificar las opciones de configuración "
-"fácilmente.\n"
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Estos comando también se utilizan en el campo \"Comando de impresión\" de "
-"los diálogos de impresión de muchas aplicaciones, pero aquí no se indica el "
-"nombre del archivo porque el archivo a imprimir lo proporciona la "
-"aplicación.\n"
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"El comando \"%s\" también permite modificar las opciones de configuración "
-"para un trabajo de impresión determinado. Simplemente, añada las "
-"configuraciones deseadas a la línea de comando, por ejemplo \"%s <archivo>"
-"\". "
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-"Para obtener una lista con las opciones disponibles para la impresora actual "
-"lea la lista que se muestra debajo o haga clic en el botón \"Imprimir lista "
-"de opciones\".\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Para imprimir un archivo desde la líne de comando (ventana de terminal) use "
-"el comando \"%s <archivo>\".\n"
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Este comando también se utiliza en el campo \"Comando de impresión\" de los "
-"diálogos de impresión de muchas aplicaciones. Pero aquí no se da el nombre "
-"del archivo porque el nombre del archivo a imprimir lo proporciona la "
-"aplicación.\n"
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-"Para obtener una lista de las opciones disponibles para la impresora actual, "
-"haga clic en el botón \"Imprimir lista de opciones\".\n"
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Para imprimir un archivo desde la líne de comando (ventana de terminal) use "
-"el comando \"%s <archivo>\" o \"%s <archivo>\".\n"
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"También puede utilizar el interfaz gráfico \"xpdq\" para configurar las "
-"opciones y manipular los trabajos de impresión.\n"
-"Si está usando KDE como entorno de escritorio tiene un \"botón de pánico\", "
-"un icono en su escritorio etiquetado como \"¡DETENER impresora!\", que "
-"detiene todos los trabajos de impresión inmediatamente cuando hace clic en "
-"él. Esto es útil, por ejemplo, para atascos de papel.\n"
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-" Los comandos \"%s\" y \"%s\" también permiten modificar las opciones de "
-"configuración para un trabajo de impresión particular. Simplemente añada las "
-"opciones deseadas a la línea de comando, por ejemplo \"%s <archivo>\".\n"
-
-#: ../../printerdrake.pm_.c:1292
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Imprimiendo en la impresora \"%s\""
-
-#: ../../printerdrake.pm_.c:1294
-msgid "Print option list"
-msgstr "Imprimir lista de opciones"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "Leyendo los datos de la impresora ..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "Transferir configuración de la impresora"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-"Puede copiar la configuración de la impresora que ha realizado \n"
-"para la cola %s a %s, su cola corriente. Todos los datos de\n"
-"configuración (nombre de la impresora, descripción, ubicación, \n"
-"tipo de conexión, y opciones predeterminadas) se transfieren,\n"
-"pero los trabajos de impresión no se transfieren.\n"
-"Debido a las siguientes razones no todas las colas se pueden \n"
-"transferir:\n"
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-"CUPS no soporta impresoras en servidores Novell o impresoras\n"
-"que envian los datos en un comando formado libremente.\n"
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-"PDQ sólo soporta impresoras locales, impresoras LPD remotas,\n"
-"e impresoras Socket/TCP.\n"
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD y LPRng no soportan impresoras IPP.\n"
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-"Además, las colas no creadas con este programa o con\n"
-"\"foomatic-configure\" no se pueden transferir."
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-"\n"
-"Tampoco se pueden transferir las impresoras configuradas con\n"
-"los archivos PPD provistos por sus fabricantes o con controladores\n"
-"CUPS nativos."
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Marque las impresoras que desea transferir y haga clic \n"
-"sobre \"Transferir\"."
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "No transferir impresoras"
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "Transferir"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Ya existe una impresora denominada \"%s\" bajo %s. \n"
-"Haga clic sobre \"Transferir\" para sobre-escribirla.\n"
-"También puede ingresar un nombre nuevo o saltear esta impresora."
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"El nombre de la impresora sólo debería contener letras, números y el guión "
-"bajo"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"La impresora \"%s\" ya existe,\n"
-"¿realmente desea sobre-escribir la configuración de la misma?"
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "Nuevo nombre de la impresora"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Transfiriendo %s ..."
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-"Ha transferido su anterior impresora por defecto (\"%s\").\n"
-"¿Debería ser también la impresora por defecto bajo el\n"
-"nuevo sistema de impresión %s?"
-
-#: ../../printerdrake.pm_.c:1423
-msgid "Refreshing printer data ..."
-msgstr "Refrescando datos de impresora ..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr "Configuración de una impresora remota"
-
-#: ../../printerdrake.pm_.c:1432
-msgid "Starting network ..."
-msgstr "Iniciando la red ..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-msgid "Configure the network now"
-msgstr "Configurar la red ahora"
-
-#: ../../printerdrake.pm_.c:1455
-msgid "Network functionality not configured"
-msgstr "Funcionalidad de red no configurada"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-"Va a configurar una impresora remota. Para esto, se necesita\n"
-"un acceso a la red funcionando, pero aún no ha configurado\n"
-"su red. Si sigue sin configuración de red, no podrá utilizar la\n"
-"impresoara que está configurando ahora. ¿Cómo quiere proceder?"
-
-#: ../../printerdrake.pm_.c:1463
-msgid "Go on without configuring the network"
-msgstr "Continuar sin configurar la red"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-"La configuración de la red hecha durante la instalación no se\n"
-"puede iniciar ahora. Por favor, verifique si la red se hace\n"
-"accesible tras reiniciar su sistema y corrija la configuración\n"
-"usando el Centro de control de Mandrake, sección \"Red e\n"
-"Internet\"/\"Conexión\", y tras esto configure la impresora,\n"
-"también utilizando el Centro de Control de Mandrake, sección\n"
-"\"Hardware\"/\"Impresora\"."
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-"El acceso a la red no estaba corriendo y no se puede\n"
-"iniciar. Por favor, verifique su configuración y su hardware.\n"
-"Luego, intente configurar su impresora remota de nuevo."
-
-#: ../../printerdrake.pm_.c:1516
-msgid "Restarting printing system ..."
-msgstr "Reiniciando el sistema de impresión ..."
-
-#: ../../printerdrake.pm_.c:1548
-msgid "high"
-msgstr "Alta"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "paranoid"
-msgstr "Paranoica"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instalando un sistema de impresión en el nivel de seguridad %s"
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-"Va a instalar el sistema de impresión %s sobre\n"
-"un sistema corriendo en el nivel de seguridad %s.\n"
-"\n"
-"Este sistema de impresión ejecuta un demonio (proceso en\n"
-"segundo plano) que espera trabajos de impresión y los\n"
-"gestiona. Las máquinas remotas pueden acceder también\n"
-"a este demonio a través de la red, así que es un potencial\n"
-"punto de ataque. Por eso, sólo unos pocos demonios\n"
-"selecionados se inician por defecto en este nivel de\n"
-"seguridad.\n"
-"\n"
-"¿Seguro que quiere configurar la impresión para esta\n"
-"máquina?"
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Starting the printing system at boot time"
-msgstr "Iniciar el sistema de impresión al arrancar"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-"El sistema de impresión (%s) no se iniciará automáticamente\n"
-"cuando arranque la máquina.\n"
-"\n"
-"Es posible que el inicio automático se desactivara al cambiar\n"
-"a un nivel de seguridad mayor, porque el sistema de impresión\n"
-"es un potencial punto de ataques.\n"
-"\n"
-"¿Quiere que se vuelva a activar el inicio automático de la\n"
-"impresión cuando el sistema se inicie de nuevo?"
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "Verificando software instalado..."
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "Quitando LPRng..."
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "Quitando LPD..."
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Seleccione sistema de impresión (spooler)"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "¿Qué sistema de impresión (spooler) desea usar?"
-
-#: ../../printerdrake.pm_.c:1759
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configuración la impresora \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Opciones de impresión"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr "Preparando PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "¿Desea configurar la impresión?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr "Sistema de impresión: "
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-"Las impresoras siguientes están configuradas.\n"
-"Haga clic sobre una de ellas para modificarla\n"
-"o para obtener información sobre ella o sobre\n"
-"\"Añadir impresora\" para añadir una impresora nueva."
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Modo normal"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Por defecto)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Impresora(s) en servidor(es) CUPS remoto(s)"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-msgid "Printer(s) on remote server(s)"
-msgstr "Impresora(s) en servidor(es) remoto(s)"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Añadir una impresora"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-msgid "Do you want to configure another printer?"
-msgstr "¿Quiere configurar otra impresora?"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "Modificar configuración de la impresora"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Impresora %s: %s %s\n"
-"¿Qué desea modificar de esta impresora?"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "¡Hacerlo!"
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "Tipo de conexión de la impresora"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "Nombre de la impresora, descripción, ubicación"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "Fabricante de la impresora, modelo, controlador"
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "Fabricante de la impresora, modelo"
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr "Poner esta impresora como predeterminada"
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "Imprimir la(s) página(s) de prueba"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr "Se sabe cómo imprimir con esta impresora"
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "Borrar impresora"
-
-#: ../../printerdrake.pm_.c:2071
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Borrando la impresora antigua \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "La impresora \"%s\" ahora es la impresora predeterminada."
-
-#: ../../printerdrake.pm_.c:2103
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "¿Seguro que quiere borrar la impresora \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2105
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Borrando la impresora \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Configuración del proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Bienvenido a la herramienta de configuración del proxy.\n"
-"\n"
-"Aquí podrá configurar sus proxies http y ftp con o sin\n"
-"usuario y contraseña.\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Por favor, rellene las informaciones del proxy http.\n"
-"Déjelo en blanco si no quiere un proxy http."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "puerto"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "La Url debería empezar por 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "La parte del puerto debería ser numérica"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Por favor, rellene las informaciones del proxy ftp.\n"
-"Déjelo en blanco si no quiere un proxy ftp."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "La Url debería empezar por 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Por favor, introduzca usuario y contraseña del proxy, si es necesario.\n"
-"Déjelo en blanco si no desea usuario/contraseña."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "usuario"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "contraseña"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "contraseña (otra vez)"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Las contraseñas no coinciden. ¡Inténtelo de nuevo!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "No se puede añadir una partición al RAID md%d _ya formateado_"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "No se puede escribir el archivo %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "Falló mkraid"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "Falló mkraid (¿quizás no estén las herramientas de raid (raidtools)?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "No hay suficientes particiones para un RAID de nivel %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-"Lanzar el sistema de sonido ALSA (Arquitectura avanzada de sonido de Linux)"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, un planificador de comandos periódicos."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd se usa para monitorizar el estado de las baterías y enviar esa\n"
-"información a syslogd. También puede usarse para apagar el equipo cuando\n"
-"la batería está casi descargada."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Ejecuta los comandos programados por el comando at en el momento\n"
-"especificado al lanzar at, y ejecuta comandos por lotes (batch) cuando\n"
-"la carga promedio del sistema es suficientemente baja."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron es un programa UNIX estándar que ejecuta programas especificados por\n"
-"el usuario periódicamente. El cron de Vixie añade varias funcionalidades al "
-"cron de Unix \n"
-"básico, incluyendo una mayor seguridad y opciones de configuración más "
-"potentes."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM añade soporte del ratón para los programas Linux en modo texto, como\n"
-"el Midnight Commander. También permite operaciones de cortar-y-pegar con\n"
-"el ratón en la consola, e incluye soporte para menúes emergentes en la "
-"consola."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake lanza una prueba del hardware, y opcionalmente configura\n"
-"el hardware nuevo/cambiado."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache es un servidor de páginas web. Se usa para servir archivos HTML\n"
-"y programas CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"El demonio para el superservidor de internet (normalmente llamado inetd) "
-"inicia\n"
-"una variedad de servicios adicionales de internet según sea necesario.\n"
-"Es el responsable de iniciar varios servicios, incluyendo telnet, ftp, rsh\n"
-"y rlogin. Al desactivar inetd, se desactivan todos los servicios que "
-"dependen de él."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Lanza el filtrado de paquetes para los núcleos de Linux de la serie 2.2,\n"
-"para configurar un cortafuegos que protege a su máquina de los ataques de la "
-"red."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Este paquete carga la definición de teclado que se indica en\n"
-"/etc/sysconfig/keyboard.  Puede ser configurado con el programa kbdconfig.\n"
-"Debe dejarse activo en la mayoría de las máquinas."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Regeneración automática de la cabecera del núcleo en /boot para\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Detección y configuración automática del hardware al arrancar."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf a veces realizará varias tareas al arrancar para\n"
-"mantener la configuración del sistema."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd es el demonio de impresión, necesario para que lpr funcione\n"
-"correctamente. Básicamente, es un servidor que coloca las tareas de\n"
-"impresión en las colas de impresión adecuadas para cada impresora."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"El servidor virtual de Linux (LVS) se usa para construir servidores de alto\n"
-"rendimiento y alta disponibilidad."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) es un servidor de nombres de dominio (DNS) usado para\n"
-"convertir los nombres de máquinas en direcciones IP."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monta y desmonta todos los puntos de montaje de sistemas de archivos\n"
-"compartidos por medio de la red; como NFS (Network File System),\n"
-"SMB (Lan Manager/Windows) y NCP (Netware)"
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/desactiva todas las interfaces de red configuradas para iniciarse\n"
-"en el arranque del sistema."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS es un protocolo muy popular para compartir archivos en redes TCP/IP.\n"
-"Este servicio proporciona la funcionalidad de servidor NFS, que se "
-"configura\n"
-"a través del archivo /etc/exports."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS es un protocolo muy popular para compartir archivos en redes TCP/IP.\n"
-"Este servicio proporciona la funcionalidad de bloqueo de archivos por NFS."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Activar el bloqueo numérico automáticamente bajo la consola y\n"
-"XFree al arrancar."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Admitir las win-impresoras OKI 4w y compatibles."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"El soporte PCMCIA se usa por lo general para admitir cosas como tarjetas\n"
-"de red o módems en ordenadores portátiles.  No se iniciará salvo que\n"
-"esté configurado, por lo que no es un problema tenerlo instalado\n"
-"en máquinas que no lo necesiten."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"El portmapper gestiona las conexiones RPC; que usan protocolos como\n"
-"NFS y NIS. El servidor portmap se debe estar ejecutando en los sistemas que "
-"actúan\n"
-"como servidores para protocolos que usan el mecanismo RPC."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix es un agente de transporte de correo (MTA), es decir el programa\n"
-"encargado de enviar el correo electrónico de una máquina a otra."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Guarda y recupera el mecanismo de entropía del sistema; usado para la\n"
-"generación de números aleatorios de gran calidad."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Asignar dispositivos 'crudos' a dispositivos de bloque (como las "
-"particiones\n"
-"de los discos), para usar aplicaciones como Oracle"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"El demonio routed permite actualizar automáticamente las tablas de "
-"enrutamiento IP\n"
-"gracias al protocolo RIP. Mientras que RIP se usa bastante en redes "
-"pequeñas,\n"
-"para redes más complejas, se necesitan protocolos de enrutamiento más "
-"complejos."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"El protocolo rstat permite a los usuarios de una red recoger\n"
-"información sobre el rendimiento de cualquier máquina de dicha red."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"El protocolo rusers permite que los usuarios de una red identifiquen\n"
-"quien está conectado en otras máquinas que respondan."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"El protocolo rwho permite que los usuarios remotos obtengan una lista\n"
-"de todos los usuarios conectados a una máquina que ejecuta el demonio rwho\n"
-"(similar al finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Lanza el sistema de sonido en su máquina"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog es el servicio a través del que varios demonios van a enviar\n"
-"sus mensajes de registro, que syslog va a redirigir a varios archivos\n"
-"de registro(log).  Es una buena idea ejecutar siempre syslog."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Carga los controladores para sus dispositivos USB."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Inicia el servidor de tipografías X11 (obligatorio para correr XFree)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Seleccione qué servicios se deben iniciar automáticamente al arrancar"
-
-#: ../../services.pm_.c:126
-msgid "Printing"
-msgstr "Imprimiendo"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr "Compartir archivos"
-
-#: ../../services.pm_.c:132
-msgid "System"
-msgstr "Sistema"
-
-#: ../../services.pm_.c:137
-msgid "Remote Administration"
-msgstr "Administración remota"
-
-#: ../../services.pm_.c:145
-msgid "Database Server"
-msgstr "Servidor de base de datos"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servicios: %d activados de %d registrados"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Servicios"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "corriendo"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "parado"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servicios y demonios"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"No hay información adicional para\n"
-"este servicio. Disculpe."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Al iniciar"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Instalando paquetes..."
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"No se puede leer su tabla de particiones, está demasiado deteriorada :-(\n"
-"Se intentará ir poniendo en blanco las particiones malas"
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "¡Error!"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "No se encuentra el archivo de imagen `%s' necesario."
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "Configurador de Instalación Automática"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Está a punto de configurar el un disquete de Instalación Automática. Esta "
-"característica es algo peligrosa y debe ser utilizada con cuidado.\n"
-"\n"
-"Con esa característica, podrá repetir la instalación que ha realizado en "
-"esta computadora, y se le consultará interactivamente en algunos pasos, para "
-"poder cambiar los valores de los mismos.\n"
-"\n"
-"Para máxima seguridad, el particionado y formateado nunca será realizado "
-"automáticamente, sin importar lo que eligió durante la instalación de esta "
-"computadora.\n"
-"\n"
-"¿Desea continuar?"
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "Configuración de pasos automáticos"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Por favor, elija para cada paso si desea que se repita como su instalación, "
-"o el mismo será manual"
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "¡Felicidades!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"El disquete ha sido generado satisfactoriamente.\n"
-"Ahora puede repetir su instalación."
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Compartir la conexión a Internet"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Ahora, la conexión compartida a Internet está activada ahora"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ya se ha realizado la configuración de la conexión compartida a Internet.\n"
-"Ahora está activa.\n"
-"\n"
-"¿Qué desea hacer?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "desactivar"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "rechazar"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "reconfigurar"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Desactivando los servidores..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Ahora, la conexión compartida a Internet está inactiva."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Ahora, la conexión compartida a Internet está desactivada"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ya se ha realizado la configuración de la conexión compartida a Internet.\n"
-"Ahora está inactiva.\n"
-"\n"
-"¿Qué desea hacer?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "activar"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Activando los servidores..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Ahora, la conexión compartida a Internet está activa."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Puede configurar su ordenador para compartir su conexión a Internet.\n"
-"Con esta característica, otras máquinas de su red local podrán usar la "
-"conexión a Internet de este ordenador.\n"
-"\n"
-"Aviso: necesita un adaptador de red dedicado para configurar una red de área "
-"local (LAN)."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfaz %s (usando el módulo %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Interfaz %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "¡No hay ningún adaptador de red en su sistema!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"No se ha detectado ningún adaptador de red en su sistema. Por favor, ejecute "
-"la herramienta de configuración del hardware."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Interfaz de red"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Sólo hay un adaptador de red configurado en su sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Se va a configurar su red de área local con ese adaptador."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Por favor, elija qué adaptador de red estará conectado a su red de área "
-"local."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Advertencia, el adaptador de red ya está configurado. Se volverá a "
-"configurar."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"¡Se encontró un conflicto potencial de direcciones LAN en la configuración "
-"de %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "¡Se detectó la configuración del cortafuegos!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"¡Atención! Se ha detectado la configuración del cortafuegos existente. Puede "
-"que necesite algún ajuste manual tras la instalación."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Configurando..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Configurando los scripts, instalando el software, iniciando los servidores..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemas al instalar el paquete %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Se ha configurado todo.\n"
-"Ahora puede compartir su conexión a Internet con otros ordenadores de su red "
-"de área local, usando la configuración automática de la red (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "La configuración ya se ha hecho, pero ahora está desactivada."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "La configuración ya se ha hecho, y ahora está activada."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "No se ha configurado la conexión compartida a Internet."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Configuración de la conexión compartida a Internet"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"¡Bienvenido a la herramienta para compartir la conexión a Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Haga click sobre Configurar para lanzar el asistente de configuración."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuración de la red (%d adaptadores)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Perfil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Borrar perfil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Perfil a borrar:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Nuevo perfil..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Nombre del perfil a crear (el perfil nuevo se crea como copia del actual):"
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Nombre de la máquina: "
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Acceso a Internet"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Tipo:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Pasarela:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Interfaz:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Estado:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Conectado"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "No conectado"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Conectar..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Desconectar..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Iniciando su conexión..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Cerrando su conexión..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"La conexión no está cerrada.\n"
-"Intente hacerlo manualmente ejecutando\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"como root."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Ahora el sistema está desconectado."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Configurar el acceso a Internet..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "Configuración de la red local"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Controlador"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Interfaz"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protocolo"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "Estado"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Configurar la red de área local..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr "Haga clic aquí para lanzar el asistente ->"
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Aplicar"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Espere, por favor... Aplicando la configuración"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"No tiene configurada ninguna interfaz.\n"
-"Configure la primera haciendo clic sobre 'Configurar'"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "Configuración LAN"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Protocolo de arranque"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Iniciado al arranque"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "cliente DHCP"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "activar ahora"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "desactivar ahora"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"No tiene ninguna conexión a Internet.\n"
-"Primero debe crear una haciendo clic sobre 'Configurar'"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Configuración de la conexión a Internet"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Configuración de la conexión a Internet"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Tipo de conexión: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parámetros"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Tarjeta ethernet"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Bienvenidos, crackers"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Pobre"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoica"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Este nivel se debe usar con mucho cuidado. Hace su sistema más simple de\n"
-"usar, pero también mucho más vulnerable: no debe usarse para una máquina\n"
-"conectada en red con otras o a Internet. No hay contraseñas de acceso."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Las contraseñas están activadas, pero tampoco se recomienda usar este\n"
-"nivel para un ordenador conectado a una red."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Pocos cambios para este nivel de seguridad, el principal es que hay más\n"
-"mensajes de advertencia y verificaciones relativas a la seguridad."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Éste es el nivel de seguridad estándar recomendado para una máquina que se\n"
-"utilizará para conectarse a Internet como cliente. Ahora hay verificaciones "
-"de seguridad."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Con este nivel, es posible usar el sistema como un servidor.\n"
-"La seguridad es lo suficientemente alta como para usar el sistema como un\n"
-"servidor que acepte conexiones de múltiples clientes. "
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Se toman las propiedades del nivel 4, pero ahora el sistema está totalmente\n"
-"cerrado. Las características de seguridad están al máximo."
-
-#: ../../standalone/draksec_.c:65
-msgid "Security level"
-msgstr "Nivel de seguridad"
-
-#: ../../standalone/draksec_.c:67
-msgid "Use libsafe for servers"
-msgstr "Utilizar libsafe para los servidores"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Una biblioteca que le defiende ante ataques de desbordamiento de búfer y "
-"ataques con cadenas de formato."
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Definiendo el nivel de seguridad"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centro de control"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Elija la herramienta que desea usar"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uso: keyboarddrake [--expert] [teclado]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "¿Desea que la tecla BackSpace envíe un Delete en la consola?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Cambie el CD-ROM"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Por favor, inserte el CD-ROM de la instalación en su unidad y presione "
-"Aceptar.\n"
-"Si no lo tiene, presione Cancelar para evitar la actualización en vivo."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "¡¡¡ No se puede iniciar la actualización en vivo !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "no se encontró ningún usb_serie\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "¿Emular el tercer botón?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Configuración del cortafuegos"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Configuración del cortafuegos"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Cortafuegos\n"
-"\n"
-"Ya tiene configurado un cortafuegos.\n"
-"Haga clic sobre Configurar para cambiar o quitar el cortafuegos"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Cortafuegos\n"
-"\n"
-"Haga clic sobre Configurar para configurar un cortafuegos estándar"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Elija su idioma"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Tipo de instalación"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detección del disco rígido"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configuración del ratón"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Elija su teclado"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Seguridad"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Sistemas de archivos"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formateo de particiones"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Elija los paquetes a instalar"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalar el sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Añadir un usuario"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configurar la red"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Servicios al inicio"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Crear un disco de arranque"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Instalar cargador de arranque"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configuración de X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Salir de la instalación"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"configurador de tinyfirewall\n"
-"\n"
-"Esto configura un cortafuegos personal para esta máquina Mandrake Linux.\n"
-"Para una solución potente de cortafuegos dedicada, por favor eche un "
-"vistazo\n"
-"a la distribución especializada MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Ahora le preguntaremos a qué servicios quiere permitir conectarse desde\n"
-"Internet. Por favor, piense cuidadosamente las respuestas, ya que la\n"
-"seguridad de su ordenador es importante.\n"
-"Por favor, si en este momento no está usando alguno de estos servicios,\n"
-"protéjalos. ¡Puede cambiar esta configuración cuando quiera\n"
-"volviendo a ejecutar esta aplicación!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"¿Está corriendo un servidor web en esta máquina que quiere que vea toda\n"
-"Internet? Si está corriendo un servidor web al que sólo necesita acceder\n"
-"desde esta máquina, aquí puede responder con seguridad NO.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"¿Está corriendo un servidor de nombres en esta máquina? Si no configuró uno\n"
-"para entregar información de IP y de la zona a toda Internet, por favor\n"
-"responda no.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"¿Desea permitir conexiones de entrada de Secure Shell (ssh)? Este es un\n"
-"reemplazo de telnet que puede usar para la entrada al sistema. Si ahora está "
-"usando\n"
-"telnet, definitivamente debería cambiar a ssh. telnet no está cifrado, por\n"
-"lo tanto algunos atacantes pueden robarle su contraseña si lo usa. ssh está\n"
-"cifrado y no permite este tipo de ataque."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"¿Desea permitir conexiones entrantes por telnet?\n"
-"Esto es terriblemente inseguro, como explicamos en la pantalla anterior. Es\n"
-"altamente recomendable responder No aquí y usar ssh en lugar de\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"¿Está corriendo un servidor FTP que debe ser accesible desde Internet?\n"
-"En ese caso, es altamente recomendable que sólo lo use para transferencias\n"
-"anónimas. Algunos atacantes pueden robar cualquier contraseña enviada por "
-"FTP,\n"
-"ya que FTP tampoco usa cifrado para transferir las contraseñas.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"¿Está corriendo un servidor de correo? Si envía sus mensajes con pine, "
-"mutt \n"
-"o cualquier otro cliente de correo de modo texto, probablemente sí.\n"
-"En caso contrario, debería proteger esto con el cortafuegos.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"¿Está corriendo un servidor POP o IMAP? Estos deberían ser\n"
-"usados para almacenar cuentas de correo no basadas en web para las\n"
-"personas en esta máquina.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Parece que está ejecutando un núcleo 2.2. Si una computadora en su casa\n"
-"o en la oficina configura su dirección IP de red automáticamente\n"
-"(asignación dinámica), debemos permitir esto. ¿Es este el caso?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"¿El reloj de su computadora está sincronizado al reloj de otra computadora?\n"
-"Mayormente, esto es lo que usan las organizaciones con servidores Unix/"
-"Linux\n"
-"medianamente grandes para sincronizar los tiempos de conexión y cosas así.\n"
-"Si no es parte de una oficina grande y nunca escuchó nada acerca de esto,\n"
-"probablemente no sea su situación."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Configuración completa. ¿Se pueden escribir estos cambios al disco?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "No se puede abrir %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "No se puede abrir %s para escribir: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Servidor, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Computadora de Red (cliente)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Servidor NFS, servidor SMB, servidor proxy, servidor SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Oficina"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Estación de trabajo GNOME"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Herramientas para su Palm Pilot o su Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Estación de trabajo"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Servidor, Cortafuegos/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Servidor de Información de Red y de Nombres de Dominio"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programas de Oficina: procesadores de palabras (kword, abiword), planillas "
-"de cálculo (kspread, gnumeric), visualizadores PDF, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Herramientas de audio: reproductores mp3 o midi, mezcladores, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Libros y COMOs sobre Linux y Software Libre"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Estación de trabajo KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedios - Vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Conjunto de herramientas para correo, noticias, web, transferencia de "
-"archivos, y chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Servidor, Bases de Datos"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Servidor de base de datos PostgreSQL o MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Herramientas para facilitar la configuración de su computadora"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedios - Sonido"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilitarios"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentación"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Herramientas para la consola"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Servidor de correo Postfix, servidor de noticias Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Estación Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Estación Multimedios"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configuración"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Más escritorios gráficos (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"El K Desktop Environment, el entorno gráfico básico con una colección de "
-"herramientas que lo acompañan"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Entorno gráfico"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Desarrollo"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache y Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Herramientas para crear y grabar CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Estación de trabajo de Oficina"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programas gráficos, tales como El Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Bibliotecas de desarrollo C y C++, programas y archivos *.h"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Computadora servidor de red"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Servidor, Correo/Groupware/Noticias"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Estación de Juegos"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Reproductores y editores de vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedios - Gráficos"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programas de entretenimiento: arcade, tableros, estrategia, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Conjunto de herramientas para leer y enviar correo y noticiar (pine, mutt, "
-"tin...) y para navegar por la Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivado, emuladores, monitoreo"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanzas personales"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Entorno gráfico con un conjunto de herramientas de escritorio y aplicaciones "
-"amigables"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clientes para los distintos protocolos incluyendo a ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Pasarela de acceso a Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programas de reproducción/edición de sonido y vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Otros entornos gráficos"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editores, shells, manipulación de archivos, terminales"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programas para administrar sus finanzas, tales como gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Juegos"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Administración de la información personal"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedios - Grabación de CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Estación de trabajo Científica"
diff --git a/perl-install/share/po/et.po b/perl-install/share/po/et.po
deleted file mode 100644
index 927cf908f..000000000
--- a/perl-install/share/po/et.po
+++ /dev/null
@@ -1,11391 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# Riho Kurg <rx@linux.ee>, 1999-2001.
-# 
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 1999-10-28 19:54+0200\n"
-"Last-Translator: Riho Kurg <rx@linux.ee>\n"
-"Language-Team: Estonian <et@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-15\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Seadista kõik monitorid sõltumatult"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Kasuta Xinerama laiendusi"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Seadista ainult kaart \"%s\" (%s)"
-
-#
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Mitme monitori seadistamine"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Süsteemis on võimalik kasutada mitut monitori.\n"
-"Mida Te soovite teha?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Graafikakaart"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Valige graafikakaart"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Valige X server"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree86 %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Millise XFree konfiguratsiooni soovite kasutada?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Teie videokaardi 3D graafikakiirendit saab kasutada vaid koos XFree %s-ga.\n"
-"XFree %s toetab Teie videokaarti ja võib omada paremat 2D tuge."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Teie kaardi 3D graafikakiirendit toetab XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s koos 3D graafikakiirendi toega"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Teie videokaardi 3D graafikakiirendit saab kasutada koos XFree %s-ga.\n"
-"SEE ON AGA EKSPERIMENTAALNE JA VÕIB OLLA EBASTABIILNE."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s koos EKSPERIMENTAALSE 3D kiirendi toega"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Teie videokaardi 3D graafikakiirendit saab kasutada vaid koos XFree %s-ga.\n"
-"SEE ON AGA EKSPERIMENTAALNE JA VÕIB OLLA EBASTABIILNE.\n"
-"Teie kaarti toetab ka XFree %s, millel on ehk parem 2D tugi."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree sätted"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Valige graafikamälu suurus"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Valige X server"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Valige monitor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Kaks kriitilist suurust on ekraanisagedus, mis määrab kogu kuva\n"
-"uuendamise aja ja realaotussagedus\n"
-"\n"
-"On VÄGA TÄHTIS, et Te ei määraks siinkohal monitori, mille realaotus on\n"
-"suurem kui Teie monitor võimaldab. Vastasel juhul võib Teie monitor hävida.\n"
-"Kui kahtlete, valige pigem väiksem väärtus."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Realaotussagedus"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Ekraaniuuendussagedus"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Monitor ei ole seadistatud"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Graafikakaart ei ole veel seatud"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Kuvatihedus ei ole veel seatud"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Hoiatus: testimine võib Teie arvuti peatada"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Proovime seadistusi"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"proovige mõnd parameetrit muuta"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Tekkis mingi viga:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Jätkub %d sekundi pärast"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Kas see on õige?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Tekkis mingi viga, proovige mõnd parameetrit muuta"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Kuvatihedus"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Valige kuvatihedus ja värvisügavus"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Graafikakaart: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Ekspertresiim"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Näita kõike"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Kuvatihedused"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klaviatuuriasetus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Hiire tüüp: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Hiire port: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Realaotussagedus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Ekraanisagedus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Graafikakaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Graafikakaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Videomälu: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Värvisügavus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Kuvatihedus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 juhtprogramm: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Valmistume X-i seadistamiseks"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Mida Te soovite teha?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Muuda monitori"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Muuda graafikakaardi"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Muuda serveri parameetreid"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Muuda kuvatihedust"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Näita lisainfot"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Proovi veel"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Välju"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Säilita muutused?\n"
-"Olemasolevad sätted:\n"
-"\n"
-"%s"
-
-# c-format
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Muudatuste aktiveerimiseks käivitage %s uuesti"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Palun väljuge ja vajutage siis Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X stardib nüüd"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Teie arvutis on võimalik käivitada X juba alglaadimisel.\n"
-"Kas soovite nii teha?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 värvi (8 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tuhat värvi (15 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tuhat värvi (16 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljonit värvi (24 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljardit värvi (32 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB või rohkem"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA, 640x400 sagedusel 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "SVGA, 800x600 sagedusel 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-ühilduv, 1024x768, 87 Hz vahelejätuga "
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "SVGA, 1024x768, 87 Hz vahelejätuga, 800x600, 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "SVGA, 800x600 sagedusel 60 Hz, 640x480 sagedusel 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA, 1024x768 sagedusel 60 Hz, 800x600 sagedusel 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Kõrgsageduslik SVGA, 1024x768, 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Mitmesageduslik, 1280x1024 sagedusel 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Mitmesageduslik, 1280x1024 sagedusel 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Mitmesageduslik, 1280x1024 sagedusel 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Kuvatihedus saab olla 1600x1200 sagedusel 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Kuvatihedus saab olla 1600x1200 sagedusel 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Partitsiooni algusesse"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Ketta algusesse (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILO installimine"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Kuhu soovite alglaaduri installida"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "LILO/grub installimine"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO tekstiresiimis"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO graafikaresiimis"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Laadimine DOS/Windowsist (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Alglaaduri peasätted"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Eelistatav alglaadur"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Alglaaduri peasätted"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Alglaadimisseade"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ei tööta vanema BIOSi korral)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Kompaktne"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "kompaktne"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Graafikamood"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Ooteaeg alglaadimisel"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Salasõna"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Salasõna (uuesti)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Piira käsurea suvandeid"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "piiratud"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Puhasta /tmp igal laadimisel"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Kui vaja, täpsusta RAM suurust (leitud %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Võimalda mitut profiili"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Anna mälu suurus megabaitides"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Säte ``Piira käsurea suvandeid'' on ilma salasõnata mittekasutatav"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Palun proovige veel"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Salasõnad ei klapi"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Initsialiseerimisteade"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Open Firmware viivitus"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Ajapiirang kerneli laadimisel"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "CD-lt laadimine lubatud?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "OF laadimine lubatud?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Vaikimisi OS?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Praegu on kasutusel sellised kirjed.\n"
-"Te võite neid lisada ning olemasolevaid muuta."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Lisa"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Tehtud"
-
-#: ../../any.pm_.c:217
-#, fuzzy
-msgid "Modify"
-msgstr "Modifitseeri RAIDi"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Millisele sektorile soovite seda tõsta?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Muu OS (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Muu OS (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Muu OS (windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Laadefail"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Juur"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Lisada"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Read-write"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Ebaturvaline"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Tähis"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Vaikimisi"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd suurus"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Eemalda kirje"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Tühi kirjetähis ei ole lubatud"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Selline tähis on juba kasutusel"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Leiti %s %s liidest"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "On Teil veel kaarte?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Kas Teil on ikka mõni %s liides?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Ei"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Jah"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Info riistvara kohta"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installime juhtprogrammil %s kaardile %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(moodul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Millist %s juhtprogrammi peaksime proovima?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Mõnedel juhtudel vajab %s juhtprogramm tööks lisainformatsiooni\n"
-"kuigi tavaliselt saab ka ilma hakkama. Kas soovite eraldi parameetreid\n"
-"määratleda või lasta juhtprogrammil ise Teie arvutit kompida? Võib juhtuda,\n"
-"et see viib arvuti segadusse kuid ei tohiks mingit jäävat kahju teha."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Proovida niisama"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Määrake parameetrid"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Nüüd võite moodulile %s parameetreid määrata"
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Nüüd võite moodulile %s parameetreid määrata.\n"
-"Parameetrid on vormingus \"nimi=väärtus nimi2=väärtus2 ...\".\n"
-"Näiteks: \"io=0x300 irq=7\""
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Mooduli parameetrid:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Moodule %s laadimine ei õnnestunud.\n"
-"Kas soovite proovida parameetreid muuta?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(juba lisatud %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Salasõna on liiga lihtne"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Palun andke kasutajatunnus"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Kasutajatunnus tohib sisaldada ainult väikesi tähti, numbreid, - ja _"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "See kasutajatunnus on juba lisatud"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Lisa kasutaja"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Sisesta kasutaja\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Kasutaja õige"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Pärisnimi"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Kasutajatunnus"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Käsurida"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Ikoon"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Vaikimisi sisenemine"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Teie arvutit saab seada vaikimisi kasutaja sisenemisele.\n"
-"Kui Te seda ei soovi, valige <Katkesta>"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Valige uus vaikimisi kasutaja :"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Valige palun käivitatav aknahaldur:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Palun valige kasutatav keel"
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "Teisi keeli saab valida pärast installimist"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Kõik"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Tere tulemast! Laadimisel aitab Teid %s!\n"
-"\n"
-"Valige nimekirjast eelistatav OS,\n"
-"vaikimisi oodake %d sekundit.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Tere tulemast! Laadimisel aitab Teid GRUB!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Kasutage valiku tegemiseks %c ja %c klahve"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Enter laeb Teie valiku, 'e' laseb muuta"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "suvandeid enne laadimist ja 'c' veel enam."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Valik laetakse automaatselt %d sekundi jooksul"
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "/boot on liiga täis"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Töölaud"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Startmenüü"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Kuhu soovite alglaaduri installida"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "selle kohta (veel) abi ei saa.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Alglaaduri stiil"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Fail"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Fail/_Välju"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle kategoriseeritud jälgimine"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle jälgimine"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tavaline jälgimine"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Traditsiooniline Gtk+ jälgimine"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Käivita alglaadimisel Aurora"
-
-#: ../../bootlook.pm_.c:100
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Valimisviis"
-
-#: ../../bootlook.pm_.c:102
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Internetiühenduse jagamise Abimees!\n"
-"\n"
-"%s\n"
-"\n"
-"Valige Abimehe käivitamiseks ``OK''"
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Seadista"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Alglaadimismood"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Töömood"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Käivita X-Windows alglaadimisel"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Ei taha automaatselt siseneda"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"Jah, soovin automaatset sisselogimist sellele (kasutajale, keskkonnale)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Katkesta"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ei saa lugeda faili /etc/inittab: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "LILO installimine ebaõnnestus. Tekkis järgnev viga:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutit"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minut"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundit"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Palun tehke oma andmetest enne tagavarakoopia"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Lugege hoolega!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Kui soovite kasutada aboot-i, jätke palun ketta algusesse vähemalt 2048 \n"
-"sektorit vaba ruumi"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Viga"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Abimees"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Uus"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "Eemalda"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Ühenduspunkt"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Eelistused"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Tüüp"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Ühenda lahti"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Ühenda"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Valige tegevus"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Teil on üks suur FAT partitsioon.\n"
-"(tavaliselt kasutab sellist MS DOS/Windows)\n"
-"Soovitame teil esmalt selle suurust muuta\n"
-"(klikkige ja siis valige \"Muuda\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Palun valige partitsioon"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Palun valige partitsioon"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Palun valige partitsioon"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Üksikasjad"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "ühendamine ebaõnnestus"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Saaleala"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Tühi"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Muu"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Failisüsteemi tüübid: "
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Tekita"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Kasutage pigem ``%s''"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Kustuta"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Kasutage enne \"Ühenda lahti\""
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Partitsiooni %s tüübi muutmisel hävivad kõik seal olnud andmed"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kuhu soovite seadme %s ühendada?"
-
-#: ../../diskdrake.pm_.c:500
-#, fuzzy
-msgid "Mount options"
-msgstr "Mooduli parameetrid:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:525
-#, fuzzy
-msgid "Removable media"
-msgstr "CD/flopi/.. autoühendamine"
-
-#: ../../diskdrake.pm_.c:532
-#, fuzzy
-msgid "Change type"
-msgstr "Muuda partitsiooni tüüp"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Mis failisüsteemi soovite kasutada?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Server"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Valige tegevus"
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Looge uus partitsioon"
-
-#: ../../diskdrake_interactive.pm_.c:188
-#, fuzzy
-msgid "Exit"
-msgstr "ext2"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Tavakasutaja > Ekspert"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Ekspert > Tavakasutaja"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Tagasi"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Jätkate ikkagi?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Lõpeta ilma salvestamata"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Lõpetate ilma partitsioonitabelit salvestamata?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Paiguta ise"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Kustuta kõik"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Veel.."
-
-#: ../../diskdrake_interactive.pm_.c:250
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Meili informatsioon"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Ei ole piisavalt ruumi automaatpaigutuseks"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Kõik primaarsed partitsioonid on kasutusel"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Partitsioone ei saa enam lisada"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Et saada rohkem partitsioone, kustutage palun üks, et luua laiendatud "
-"partitsioon"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Kirjuta partitsioonitabel"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Päästa partitsioonitabel"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Päästa partitsioonitabel"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Päästa partitsioonitabel"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "CD/flopi/.. autoühendamine"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Valige fail"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Tabeli tagavarakoopia ei ole sama suurusega\n"
-"Soovite jätkata?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Hoiatus"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Pange tühi flopi masinasse\n"
-"Kõik andmed sellel hävivad"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Proovin päästa partitsioonitabelit"
-
-#: ../../diskdrake_interactive.pm_.c:340
-#, fuzzy
-msgid "Detailed information"
-msgstr "Meili informatsioon"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Muuda suurust"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Liiguta"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Vorminda"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Aktiivne"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Lisa RAIDi"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Lisa LVMi"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Eemalda RAIDist"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Eemalda LVMist"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Modifitseeri RAIDi"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Kasuta loopback-ina"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Looge uus partitsioon"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Algsektor: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Suurus (MB): "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Failisüsteemi tüüp: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Ühenduspunkt:"
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Eelistus: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Vormindan loopback faili %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Muuda partitsiooni tüüp"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kuhu soovite loopback-faili %s ühendada?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Seda ühenduspunkti ei saa eemaldada, kuna partitsioon on kasutusel.\n"
-"loopback-ina. Eemaldage enne loopback"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Arvutan FAT failisüsteemi piire"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Muudan suurust"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "See partitsioon ei ole muudetav"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Selle partitsiooni andmetest võiks olla tagavarakoopia"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Partitsiooni %s suuruse muutmisel hävivad sellel kõik andmed"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Valige uus suurus"
-
-#: ../../diskdrake_interactive.pm_.c:591
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Suurus (MB): "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Millisele kettale soovite seda ümber paigutada?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Millisele sektorile soovite seda ümber paigutada?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Paigutan ümber"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Liigutan partitsiooni..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Vali olemasolev RAID, millele lisada"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "uus"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Vali olemasolev LVM, millele lisada"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "LVM nimi?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Seda partitsiooni ei saa loopback-ina kasutada"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "loopback faili nimi:"
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Pärisnimi"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "See fail on juba loopback-ina kasutusel, valige mõni muu"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Fail on juba olemas. Kas kasutan seda?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "seade"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "tase"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "ühiku suurus"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Vaadake ette: see võib olla ohtlik."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Mis tüüpi partitsioonid teete?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Vabandan, aga ei saa nõustuda /boot kataloogi paigutamisega kaugemale 1024-"
-"st silindrist.\n"
-"Kui kasutate LILO-t, ei tööta see sel moel, kui aga ei kasuta, ei ole Teile "
-"ka /boot vajalik"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Partitsioon, mida soovite kasutada juurkataloogi (/) hoidmiseks, asub\n"
-"füüsiliselt tagapool 1024-t silindrit ja Teil ei ole /boot partitsiooni.\n"
-"Kui plaanite kasutada LILO alglaadurit, lisage kindlasti /boot partitsioon"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Olete valinud juurpartitsiooniks (/) tarkvaralise RAID-i.\n"
-"Ilma /boot partitsioonita ei ole võimalik sellist süsteemi laadida.\n"
-"Lisage kindlasti /boot partitsioon!"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Ketta %s partitsioonitabel salvestatakse!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Muudatuste jõustamiseks vajate alglaadimist"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Partitsiooni %s vormindamisel hävivad sellel kõik andmed"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Vormindan"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Vormindan loopback faili %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Vormindan partitsiooni %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid ebaõnnestus"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Ei ole piisavalt ruumi uute partitsioonide jaoks"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Ei ole piisavalt ruumi uute partitsioonide jaoks"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Kuvatihedus: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Seade: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS kettatähis: %s (arvatavasti)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Tüüp: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Nimi: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Algus: sektor %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Suurus: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorit"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Silindrid %d kuni %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Vormindatud\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Vormindamata\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Ühendatud\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "loopback fail(id): %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partitsioonilt toimub alglaadimine\n"
-"    (MS-DOS-i, mitte lilo jaoks)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Tase %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Ühiku suurus %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-kettad %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "loopback faili nimi: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Võimalik, et on tegemist\n"
-"juhtpartitsiooniga, parem oleks\n"
-"seda mitte puutuda.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"See on eriline, alglaadimisel\n"
-"kasutatav partitsioon, mis\n"
-"võimaldab mitme operratsioonisüsteemi\n"
-"laadimist.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Suurus: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geomeetria: %s silindrit, %s pead, %s sektorit\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-kettad %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitsioonitabeli tüüp: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "siinil %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Eelistused: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s vormindamine seadmel %s ebaõnnestus"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ei oska seadet %s vormindada tüüpi %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "ühendamine ebaõnnestus"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "ühendamine ebaõnnestus: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "viga %s lahti ühendamisel: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "lihtne"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "JFS ei ole kasutatav alla 16MB partisioonidel"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "ReiserFS ei ole kasutatav alla 32MB partisioonidel"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Ühenduspunktid peavad algama kaldkriipsuga (/)"
-
-# c-format
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ühenduspunktile %s on juba üks partitsioon määratud\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Te ei saa ühenduspunkti %s jaoks LVM loogilist ketast kasutada"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "See kataloog peab jääma kokku juurfailisüsteemiga"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "See ühenduspunkt vajab tõelist (ext2, reiserfs) failisüsteemi\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Seadme %s avamine kirjutamiseks ebaõnnestus: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Tekkis viga: failisüsteemi loomiseks ei leitud ühtki seadet. Palun\n"
-"kontrollige oma riistvara."
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Teil ei ole ühtki partitsiooni!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ülalpool on toodud kõik Teie kõvakettal olemasolevad Linuxi partitsioonid\n"
-"Vaikimisi on need enamasti üsna mõistlikud. Kui teete nendes muutusi,\n"
-"pidage meeles, et kindlasti vajate juurpartitsiooni (\"/\"). Liiga väikeste\n"
-"partitsioonide puhul võib tekkida raskusi piisava hulga tarkvara "
-"installimisel\n"
-"Kasutajate jaoks on sageli mõistlik luua eraldi \"/home\" partitsioon.\n"
-"\n"
-"\n"
-"Iga partitsiooni juures on toodud abiinfona \"Nimi\" ja \"Mahutavus\".\n"
-"\n"
-"\n"
-"\"Nimi\" koosneb kõvakettatüübist, selle numbrist ja partitsiooni\n"
-"numbrist (näiteks \"hda1\").\n"
-"\n"
-"\n"
-"Kõvaketta tüüp on \"hd\" kui on tegemist IDE kettaga ja \"sd\" kui on\n"
-"tegemist SCSI kettaga.\n"
-"\n"
-"\n"
-"Kõvaketta number on alati täht \"hd\" või \"sd\" järel. IDE ketastel:\n"
-"\n"
-"   * \"a\" - esmase IDE kontrolleri ülem,\n"
-"\n"
-"   * \"b\" - esmase IDE kontrolleri alluv,\n"
-"\n"
-"   * \"c\" - teisase IDE kontrolleri ülem,\n"
-"\n"
-"   * \"d\" - teisase IDE kontrolleri alluv.\n"
-"\n"
-"SCSI ketaste puhul on \"a\" esimene, \"b\" teine ja nii edasi."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Nüüd saate valida, milliseid teenused peaks süsteemi laadimisel käivitama.\n"
-"\n"
-"\n"
-"Abiinfo balloonis antakse lühike kirjeldus igaühe kohta neist.\n"
-"\n"
-"Kui kavatsete oma süsteemi kasutada serverina, olge eriti tähelepanelik:\n"
-"tõenäoliselt ei soovi te käivitada mittevajalikke teenuseid."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"Linuxil on kombeks hoida sisemist kella Greenwichi (GMT) ajas ja muuta\n"
-"vajadusel süsteemi kella vastavalt Teie valitud ajavööndile."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-#, fuzzy
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Olete jõudnud punkti, kus peate otsustama, kuhu täpselt Mandrake Linux oma\n"
-"kõvakettal paigaldada. Kui kõvaketas on tühi või kui mõni muu \n"
-"operatsioonisüsteem seda täielikult kasutab, on vaja partitsioneerida.\n"
-"Partitsioneerimine on tegevus, mille käigus tekitatakse kettale loogilised\n"
-"piirkonnad Teie uue Mandrake Linux süsteemi installimiseks.\n"
-"\n"
-"\n"
-"Kuna partitsioneerimine ei ole pööratav protsess, siis peab kogemusteta\n"
-"kasutaja olema iseäranis ettevaatlik! Selle tegevuse lihtsustamiseks ja\n"
-"vigade vähendamiseks on Teie jaoks loodudki käesolev abimees. Siiski,\n"
-"palun varuga natuke ettevalmistusaega\n"
-"\n"
-"\n"
-"Mandrake Linux jaoks on Teil vaja vähemalt kaht partitsiooni. Ühele "
-"paigutatakse\n"
-"operatsioonisüsteem ise ja teisele luuakse virtuaalmälu (saaleala e. swap).\n"
-"\n"
-"\n"
-"Kui partitsioonid on juba loodud (eelmise installi või mõne muu vahendi\n"
-"abil), siis peate need lihtsalt Linuxi paigaldamise jaoks välja valima.\n"
-"\n"
-"\n"
-"Kui partitsioone ei ole varem loodud, peate kasutama ülalttoodud abimeest.\n"
-"Abimees hindab Teie kõvaketast ja pakub järgmised valikud:\n"
-"\n"
-"* Kasuta olemasolevaid partitsioone: abimees leidis kettalt Linuxi "
-"partitsioonid.\n"
-"  Kui soovite neid kasutada, valige see.\n"
-"\n"
-"\n"
-"* Puhasta kogu ketas: kui soovite alustada Mandrake Linux installimist "
-"täiesti tühjale kettale.\n"
-"  Tähelepanu: kõik andmed, mis enne kettal olid, hävivad!\n"
-"\n"
-"\n"
-"* Kasuta vaba ruumi Windowsi partitsioonil: kui Microsoft Windows kasutab "
-"kogu Teie kõvaketta vaba pinna,\n"
-"  saate luua lisaruumi Windowsi partitsiooni suuruse muutmisel.\n"
-"  Sageli on see mõistlik, kui soovite kasutada ka Windowst.\n"
-"\n"
-"* Asjatundja: kui soovite ise oma kõvaketast jagada, valige see. Nii on Teil "
-"kõige rohkem võimalusi,\n"
-"  aga ka kõige rohkem ohtusid! Ärge valige seda, kui Te täpselt ei tea, mida "
-"teete."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Kõik värskelt loodud partitsioonid tuleb enne kasutamist vormindada\n"
-"ehk sinna tuleb luua failisüsteemid.\n"
-"\n"
-"\n"
-"Samuti võib vormindada varem olemas olnud partitsioonid, kui soovite\n"
-"seal leiduvad andmed ära kustutada.\n"
-"\n"
-"\n"
-"Paneme tähele, et alati ei ole kõigi vanade partitsioonide vormindamine\n"
-"vajalik.\n"
-"Kindlasti võib vormindada partitsioone, kus varem asus \"/\", \"/usr\"\n"
-"või \"/var\" aga kasutajate faile sisaldav \"/home\" võiks jääda\n"
-"alles.\n"
-"\n"
-"\n"
-"Klikkige \"OK\", kui olete vormindamiseks valmis."
-
-#: ../../help.pm_.c:376
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Teie Mandrake Linux süsteemi hakati nüüd installima. Selleks võib\n"
-"olenevalt Teie poolt valitud pakettide arvust ja Teie arvuti kiirusest\n"
-"kuluda mõnikümmend minutit.\n"
-"\n"
-"\n"
-"Palun veidi kannatlikkust."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-#, fuzzy
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Nüüd peate valima partitsiooni(d), kuhu soovite Mandrake Linux installida.\n"
-"\n"
-"Partitsioon on loogiliselt eraldatud kõvaketta piirkond, mille suurust\n"
-"ei ole võimalik hiljem, töötavas süsteemis enam muuta. Samuti hävivad\n"
-"partitsiooni kustutamisel kõik sellel sisalduvad andmed.\n"
-"\n"
-"Et muuta seda tegevust lihtsamaks, on loodud Abimees, mille soovitused\n"
-"on harilikult mõistlikud.\n"
-"\n"
-"\n"
-"Partitsioonide loomiseks valige esmalt kõvaketas.\n"
-"\n"
-"\n"
-"Valitud ketta partitsioneerimiseks on järgmised võimalused:\n"
-"\n"
-"   * Puhasta kõik: kustutatakse kõik olemasolevad partitsioonid sellel "
-"kettal\n"
-"\n"
-"\n"
-"   * Paiguta ise: sel juhul tekitatakse Linuxi jaoks vajalikud partitsioonid "
-"vabale kettapinnale automaatselt.\n"
-"\n"
-"\n"
-"   * Päästa partitsioonitabel: kui partitsioonitabel on vigastatud, võib "
-"proovida seda parandada. \n"
-"     Palun ärge sellega igaks juhuks palju arvestage.\n"
-"\n"
-"\n"
-"   * Lae uuesti: kui soovite tühistada kõik enda tehtud muutused ja alustada "
-"algse partitsioonitabeliga\n"
-"\n"
-"\n"
-"   * Abimees: kui soovite uue partitsioonitabeli loomisel samm-sammulist "
-"juhatust.\n"
-"     Soovitav, kui ei ole varem midagi sellist teinud.\n"
-"\n"
-"\n"
-"   * Taasta flopilt: kui olete varem salvestanud koopia "
-"partitsioonitabelist\n"
-"     flopile, tuleb see nüüd kasuks\n"
-"\n"
-"\n"
-"   * Salvesta flopile: kui soovite salvestada partitsioonitabeli flopile, "
-"et\n"
-"     vajadusel oleks võimalik sealt taastada.\n"
-"\n"
-"\n"
-"   * Tehtud: kui olete partitsioneerimise lõpetanud, siis saate muutused "
-"nüüd salvestada\n"
-"\n"
-"\n"
-"Valitud partitsioonil on võimalikud järgmised tegevused:\n"
-"\n"
-"           * Ctrl-c uue partitsiooni loomine\n"
-"\n"
-"           * Ctrl-d partitsiooni kustutamine\n"
-"\n"
-"           * Ctrl-m ühenduspunkti seadmine"
-
-#: ../../help.pm_.c:460
-#, fuzzy
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Teie arvuti kõvakettal on rohkem kui üks Microsoft Windows partitsioon.\n"
-"Palun valige välja see, mille suurust soovite Mandrake Linux jaoks muuta.\n"
-"\n"
-"\n"
-"Teie abistamiseks on iga partitsioonidel näidatud \"Nimi Linuxis\", \"Nimi "
-"Windowsis\" ja \"Mahutavus\".\n"
-"\n"
-"\"Nimi Linuxis\" koosneb kõvakettatüübist, selle numbrist ja partitsiooni\n"
-"numbrist (näiteks \"hda1\").\n"
-"\n"
-"\n"
-"Kõvaketta tüüp on \"hd\" kui on tegemist IDE kettaga ja \"sd\" kui on\n"
-"tegemist SCSI kettaga.\n"
-"\n"
-"\n"
-"Kõvaketta number on alati täht \"hd\" või \"sd\" järel. IDE ketastel:\n"
-"\n"
-"   * \"a\" - esmase IDE kontrolleri ülem,\n"
-"\n"
-"   * \"b\" - esmase IDE kontrolleri alluv,\n"
-"\n"
-"   * \"c\" - teisase IDE kontrolleri ülem,\n"
-"\n"
-"   * \"d\" - teisase IDE kontrolleri alluv.\n"
-"\n"
-"SCSI ketaste puhul on \"a\" esimene, \"b\" teine ja nii edasi.\n"
-"\n"
-"\n"
-"\"Nimi Windowsis\" on täht, millega Microsoft Windows vastavat seadet\n"
-"tähistab."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Palun natuke kannatust. Selleks võib kuluda mõnigi minut."
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Palun valige \"Installimine\" kui Teie arvutis ei ole varasemat Mandrake "
-"Linux\n"
-"versiooni.\n"
-"\n"
-"\n"
-"Palun valige \"Uuendamine\" kui soovite uuendada varasemat Mandrake Linux "
-"versiooni.\n"
-"\n"
-"\n"
-"Sõltuvalt Teie GNU/Linuxi alastest teadmistest saate valida erineva tasemega "
-"installi- või uuendusmeetodi:\n"
-"\n"
-"* Soovituslik: Te ei ole varem GNU/Linuxit installinud. Kõik tehakse "
-"lihtsaks ja esitatakse vähe küsimusi\n"
-"\n"
-"\n"
-"* Isetehtud: Olete Linuxiga tuttav ja soovite süsteemi kohandada vastavalt\n"
-"  Teie vajadustele. Järgmisena saate teha valikud sõltuvalt Teie arvuti \n"
-"  edaspidisest kasutusalast.\n"
-"\n"
-"\n"
-"* Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
-"  süsteemi, mis sobiks nagu valatult Teie täpsete ootustega.\n"
-"  Aga palun, palun: ÄRGE VALIGE SEDA, KUI TE TÄPSELT EI TEA, MIDA TEETE!"
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Palun valige õige port. Näiteks MS Windows-i COM1 kannab GNU/Linuxis\n"
-"nime ttyS0."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (ehk LInux LOader) ja Grub on alglaadurid: nad võimaldavad laadida\n"
-"kas GNU/Linuxi või mõne muu Teie arvutis olevad operatsioonisüsteemi.\n"
-"Tavaliselt tuvastakse teised operatsioonisüsteemid õigesti ja seadistatakse\n"
-"ka alglaadur. Kui Teil aga ei ole õnne, tuleb parameetrid seada\n"
-"käsitsi. Olge sel juhul hoolas valima õiged."
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Nüüd peate valima, milliselt kettaosalt soovite GNU/Linuxit laadida.\n"
-"\n"
-"Valige \"Kõvaketta esimene sektor (MBR)\", kui ei tea täpselt, mida\n"
-"teha."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"Esmalt otsib DrakX PCI siini SCSI liideseid. Kui neid leitakse, ja \n"
-"vastav(ad) juhtprogramm(id) on teada, siis laetakse ja installitakse \n"
-"kõik vajalik automaatselt.\n"
-"\n"
-"\n"
-"Kui Teie SCSI liides kasutab ISA siini või kui DrakX ei tea,\n"
-"millist juhtprogrammi kasutada või Teil ei ole üldse SCSI liidest,\n"
-"siis küsitakse Teilt selle kohta.\n"
-"Kui Teil SCSI liidest tõesti ei ole, vastake \"Ei\". Kui Teil aga siiski\n"
-"on, siis vastake \"Jah\". Seejärel lastakse Teil nimekirjast sobiv\n"
-"juhtprogramm valida.\n"
-"\n"
-"\n"
-"Kui olete juhtprogrammi välja valinud, on Teil võimalus anda sellele\n"
-"ka parameetreid. Siiski, enamasti läheb kõik kenasti ka ilma neid\n"
-"sisestamata: vastavad andmed leiab juhtprogramm ise.\n"
-"\n"
-"Kui automaatne parameetrite otsimine ei tööta, tutvuge palun lähemalt\n"
-"oma SCSI liidese dokumentatsiooniga või küsige abi riistvara müüjalt.\n"
-"Vaadake ka User Guide'i (peatükk 2, lõik \"Collective informations on your\n"
-"hardware\")\n"
-"Ka samas masinas olev Windows oskab vahel SCSI kohta kasulikku \n"
-"informatsiooni anda."
-
-#: ../../help.pm_.c:720
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"You can add additional entries for yaboot, either for other operating "
-"systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"\n"
-"For other OS's - the entry consists only of a label and the root partition.\n"
-"\n"
-"\n"
-"For Linux, there are a few possible options: \n"
-"\n"
-"\n"
-"  - Label: This is simply the name will type at the yaboot prompt to select "
-"this \n"
-"boot option.\n"
-"\n"
-"\n"
-"  - Image: This would be the name of the kernel to boot.  Typically vmlinux "
-"or\n"
-"a variation of vmlinux with an extension.\n"
-"\n"
-"\n"
-"  - Root: The root device or '/' for your Linux installation.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: On Apple hardware, the kernel append option is used quite often "
-"to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button "
-"emulation\n"
-"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The "
-"following \n"
-"are some examples:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: This option can be used either to load initial modules, before "
-"the boot \n"
-"device is available, or to load a ramdisk image for an emergency boot "
-"situation.\n"
-"\n"
-"\n"
-"  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you "
-"should need\n"
-"to allocate a large ramdisk, this option can be used.\n"
-"\n"
-"\n"
-"  - Read-write: Normally the 'root' partition is initially brought up read-"
-"only, to allow\n"
-"a filesystem check before the system becomes 'live'.  You can override this "
-"option here.\n"
-"\n"
-"\n"
-"  - NoVideo: Should the Apple video hardware prove to be exceptionally "
-"problematic, you can\n"
-"select this option to boot in 'novideo' mode, with native framebuffer "
-"support.\n"
-"\n"
-"\n"
-"  - Default: Selects this entry as being the default Linux selection, "
-"selectable by just\n"
-"pressing ENTER at the yaboot prompt.  This entry will also be highlighted "
-"with a '*', if you\n"
-"press TAB to see the boot selections."
-
-#: ../../help.pm_.c:765
-#, fuzzy
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n"
-"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"Yaboot main options are:\n"
-"\n"
-"\n"
-"  - Init Message: A simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-"\n"
-"  - Boot Device: Indicate where you want to place the information required "
-"to \n"
-"boot to GNU/Linux. Generally, you will have setup a bootstrap partition "
-"earlier \n"
-"to hold this information.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: Unlike LILO, there are two delays available with \n"
-"yaboot.  The first delay is measured in seconds and at this point you can \n"
-"choose between CD, OF boot, MacOS, or Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: This timeout is similar to the LILO boot delay.  "
-"After \n"
-"selecting Linux, you will have this delay in 0.1 seconds before your "
-"default\n"
-"kernel description is selected.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: Checking this option will allow you to choose 'C' for "
-"CD at\n"
-"the first boot prompt.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: Checking this option will allow you to choose 'N' for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-"\n"
-"  - Default OS: You can select which OS will boot by default when the Open "
-"Firmware \n"
-"Delay expires."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Valige kõvaketas, mida soovite Mandrake Linux installimiseks puhastada\n"
-"Ettevaatust, kõik sellel leiduvad andmed hävitatakse ja ei ole enam\n"
-"taastatavad."
-
-#: ../../help.pm_.c:832
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Valige \"OK\" kui soovite kustutada kõik sellel kettal asuvad "
-"partitsioonid.\n"
-"Ettevaatust, peale \"OK\" klikkimist ei ole enam võimalik sellelt kettalt\n"
-"andmeid taastada.\n"
-"\n"
-"\n"
-"Katkestamiseks valige \"Katkesta\"."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Üldlevi kasutamine on ilma NIS domeenita võimatu"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Pane FAT formaadis flopi seadmesse %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "See flopi ei ole FAT formaadis"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Et kasutada seda paketivalikut, alustage installimist käsureaga \"linux "
-"defcfg=floppy\""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Viga faili %s lugemisel"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "OK"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Osa teie riistvarast nõuab tarnijapoolseid juhtprogramme.\n"
-"Informatsiooni nende kohta saate: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Teil peab olema juurpartitsioon.\n"
-"Selleks looge uus partitsioon (või valige üks olemasolevatest).\n"
-"Siis valige tegevus \"Ühenduspunkt\" ja seadke see kui '/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Teil peab olema saaleala"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Saaleala ei ole määratud\n"
-"\n"
-"Jätkate ikkagi?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Teil peab olema saaleala"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Kasuta vaba ruumi"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ei ole piisavalt ruumi uute partitsioonide jaoks"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Kasuta olemasolevat partitsiooni"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Kasutatavat partitsiooni ei leitud"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Kasuta Windowsi partitsiooni loopback-ina"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Millisele partitsioonile soovite installida Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Valige suurused"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Juurpartitsiooni suurus (MB): "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Saaleala suurus (MB): "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Kasuta vaba ruumi Windowsi partitsioonil"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Mis partitsiooni soovite muuta?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Arvutan Windowsi failisüsteemi piire"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT partitsiooni suurust ei õnnestu muuta, \n"
-"ilmnes selline viga: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Teie Windowsi partitsioon on fragmenteerunud, palun kasutada 'defrag'-i"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"HOIATUS!\n"
-"\n"
-"DrakX hakkab Teie Windowsi partitsiooni suurust muutma. Olge ettevaatlik:\n"
-"see operatsioon võib olla ohtlik Teie failidele. Palun kasutage enne\n"
-"scandisk-i, defrag-i ja tehke tagavarakoopia.\n"
-"Kui olete oma otsuses kindel, vajutage OK."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Kui palju ruumi jätate Windowsi jaoks?"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "Partitsioon %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Suuruse muutmine ebaõnnestus: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr "Sobivat FAT partitsiooni ei leitud (ei ole piisavalt ruumi)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Tühjenda kogu ketas"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Eemalda Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Teil on rohkem kui üks kõvaketas, millisele neis installite Linuxi?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Kettal %s hävivad KÕIK partitsioonid ja andmed"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Partitsioneerin ise"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Kasuta fdisk-i"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Nüüd saate partitsioneerida %s kõvaketta\n"
-"Kui olete valmis, salvestage käsuga 'w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Teil ei ole piisavalt vaba ruumi Windowsi partitsioonil"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Installimiseks ei ole üldse ruumi"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX kettajagamise abimees leidis sellised lahendused:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ketta jagamine ebaõnnestus: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Käivitame võrguliidesed"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Seiskame võrguliidesed"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Tekkis mingi viga, aga seda ei suuda programm ise klaarida.\n"
-"Jätkake omal vastutusel."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Ühenduspunkt %s on määratud topelt"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Mõned tähtsad paketid ei saanud korralikult paika.\n"
-"Teie CD-lugeja või CD on ilmselt vigane.\n"
-"Paketifaile CD-l saate kontrollida käsuga \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "See ongi %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Flopiseade ei ole kättesaadav"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Järgmine samm: '%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Valige paigalduse maht"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Suurus kokku: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versioon: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Suurus: %d kB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Valige paketid installimiseks"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Info"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Installimine"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Installin"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Palun oodake, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Aega jäänud "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Aega kokku "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Valmistun installimiseks"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Paketi %s installimine"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Ikkagi edasi?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Pakettide tellimisel tekkis viga:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Kasutada olemasolevat X-i seadistust?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Teie süsteemil on ressursiprobleeme ja installimine võib ebaõnnestuda.\n"
-"Kui nii juhtub, proovige palun tekstipõhjalist paigaldust. Selleks \n"
-"vajutaga laadimisel F1 ja sisestage 'text'"
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Installi klass"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Palun valige üks järgnevatest paigaldusklassidest"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Teie poolt valitud gruppide kogusuurus on umbes %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Kui soovite installida sellest vähem, valige vastav protsent.\n"
-"\n"
-"Madalama protsendi puhul installitakse vaid kõige tähtsamad paketid;\n"
-"100%% tähendab kõige valitud pakettide installimist."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, fuzzy, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Teil on kettal ruumi vaid %d%% pakettide jaoks.\n"
-"\n"
-"Kui soovite sellest vähem, valige väiksem protsent ja installimisele\n"
-"kuuluvad vaid olulisemad paketid."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Täpsemalt saate valida järgmisel sammul"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Installitavate pakettide protsent"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Paketigruppide valik"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Valik paketthaaval"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Suurus kokku: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Vigane pakett"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nimi: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Tähtsus: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Seda paketti ei saa valida, kettaruumi ei ole paigalsuseks piisavalt"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Installimiseks on valitud järgmised paketid"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Eemaldamiseks on valitud järgmised paketid"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Seda paketti ei saa (mitte) valida"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "See pakett on kohustuslik"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "See pakett on juba installitud"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Selle paketi peaks uuendame\n"
-"Olete kindel, et Te ei vali seda?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Selle paketi peate valima, sest selle uuendamine on kohustuslik"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Näita automaatselt valitud pakette"
-
-#: ../../install_steps_gtk.pm_.c:460
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Salvesta flopile"
-
-#: ../../install_steps_gtk.pm_.c:461
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Salvest paketivalik"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Minimal install"
-msgstr "Eemaldamine"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Oletan"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Palun oodake, valmistun installimiseks"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d paketti"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Hoiatus\n"
-"\n"
-"Palun lugege hoolega alltoodud teksti. Kui Te ei ole kõigi alljärgnevate\n"
-"väidetega, on installimine järgmise CD pealt keelatud. Vajutage 'Keeldun', \n"
-"et jätkata installimist ilma selle CD-ta.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Nõus"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Keeldun"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Vahetage CD!\n"
-"\n"
-"Palun sisestage CD pealdisega \"%s\" lugejasse ja vajutage <OK>.\n"
-"Kui teil säherdust ei ole, vajutage <Katkesta>"
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Pakettide installimisel tekkis viga:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Tekkis mingi viga"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Lõppkasutaja litsentsileping"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Järgnev lõppkasutaja litsents on eksimuste vältimiseks originaalkeeles\n"
-"\n"
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klaviatuur"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Palun valige klaviatuuriasetus"
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Võimalike klaviatuuride täielik nimekiri"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Millist installi klassi Te soovite"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Installimine/Uuendus"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "On see installimine või taastamine?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Soovituslik"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Uuendus"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Palun valige hiire tüüp"
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Hiire port"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Millisesse seerialporti on Teie hiir ühendatud?"
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Nuppude teesklemine"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Teeskle 2 hiirenupp"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Teeskle 3 hiirenuppu"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA kaartide seadmine..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "IDE seadistamine"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "ei leia partitsioone"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Otsin partitsioonidelt ühenduspunkte"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Valige ühenduspunktid"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Partitsioonitabel on loetamatu, liiga rikutud DrakX-i jaoks :(\n"
-"Proovin loetamatud kirjed puhastada kuid ANDMED NENDEL HÄVIVAD.\n"
-"Teine võimalus on keelata DrakX-il partitsioonitabeli muutmine.\n"
-"(Viga oli selline: %s)\n"
-"Kas olete nõus partitsioonide kaotamisega?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ei saanud partitsioonitabeli lugemisega hakkama.\n"
-"Jätkate omal vastutusel!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:349
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Juurpartitsiooni ei leitud"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Juurpartitsioon"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Millisel partitsioonil hoiate juurkataloogi (/)?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Partitsioonitabeli säilitamiseks vajate alglaadimist"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Valige partitsioonid, mida soovite vormindada"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Blokkide kontroll?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Vormindan partitsioone"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Loon ja vormindan faili %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Saaleala on installimiseks liiga väike, palun lisage"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Otsin kättesaadavaid pakette"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Otsin uuendatavaid pakette"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "Teie kõvakettal ei ole piisavalt vaba ruumi (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Täielik (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimaalne (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Soovitatav (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Isetehtud"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:525
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Taasta flopilt"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Taasta flopilt"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Package selection"
-msgstr "Paketigruppide valik"
-
-#: ../../install_steps_interactive.pm_.c:532
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Pane flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Salvesta flopile"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Kui Teil on olemas kõik alltoodud CD-d, klikkige <OK>.\n"
-"Kui Teil ei ole ühtki neist, klikkige <Katkesta>.\n"
-"Kui puuduvad mõned CD-d, märkige vaid olemasolevad ja siis <OK>."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD pealdisega \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Paketi %s installimine\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Paigaldusjärgsed sätted"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Pane flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Pange palun tühi flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Nüüd on Teil võimalik oma süsteemi laadida krüptotarkvara.\n"
-"\n"
-"HOIATUS:\n"
-"\n"
-"Lähtuvalt erinevatest sellisele tarkvarale kohaldavatest nõuetest ja \n"
-"mõjutatuna eri jurisdiktsioonide normidest peavad kliendid ja/või \n"
-"lõppkasutajad olema kindlad, et nende asukohamaa jurisdiktsiooni "
-"õiguslikud \n"
-"aktid lubavad neil alla laadida, säilitada ja/või kasutada \n"
-"krüptograafiliste algoritmide realisatsioone sisaldavat tarkvara.\n"
-"\n"
-"Lisaks sellele peavad kliendid ja/või lõppkasutajad jälgima asukohamaa \n"
-"juriidiliste normide täitmist. Kui klient ja/või lõppkasutaja rikub "
-"kehtivaid \n"
-"õigusnorme, kohaldatakse karistus vastavalt asukohamaa seadustele.\n"
-"\n"
-"Mitte mingil juhul ei kanna Mandrakesoft S.A. ega tarkvara tarnija \n"
-"vastutust ei otseselt ega kaudselt tekkinud kahjude eest (kaasa arvatud, \n"
-"kuid mitte ainult, saamatajäänud tulu, äritegevuse katkestamine, äriinfo \n"
-"kaotsimine ja muud rahalised kaotused ning võimalikud kohtu poolt välja \n"
-"mõistetud hüvitused), mis tulenevad tarkvara, mis on kasutatav pärast \n"
-"käesoleva lepingu tingimustega nõustumist, alla laadimisest, hoidmisest \n"
-"või kasutamisest.\n"
-"\n"
-"Kõigi lepinguga seotud küsimuste asjus pöörduge palun aadressil: \n"
-"Mandrakesoft, Inc. \n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Valige peegel, millelt lugeda pakettide nimekiri"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Proovin lugeda peeglilt pakettide nimekirja"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Palun valige paketid installimiseks"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Millises ajavöötmes asute?"
-
-#: ../../install_steps_interactive.pm_.c:813
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Kas Teie arvuti sisekell on seatud GMT ajale?"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:821
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS server:"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "CUPS printserver"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Printerit ei ole"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Kokkuvõte"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Hiir"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Ajavööde"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Printer"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDN kaart"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Helikaart"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV kaart"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-#, fuzzy
-msgid "NIS"
-msgstr "Kasuta NIS-i"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-#, fuzzy
-msgid "Local files"
-msgstr "Kohalik printer"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Juurkasutaja salasõna"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Salasõna puudub"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Salasõna on liiga lihtne (peaks olema vähemalt %d tähemärki)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Autentimisviis"
-
-#: ../../install_steps_interactive.pm_.c:949
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autentimisviis"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:951
-#, fuzzy
-msgid "LDAP Server"
-msgstr "NIS server:"
-
-#: ../../install_steps_interactive.pm_.c:957
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "NIS autentimine"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS domeen"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS server:"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Isetehtud alglaadimisketas annab Teile võimaluse laadida Linux flopilt\n"
-"sõltumata tavaliselt alglaadijast. See võib abiks olla, kui Te ei soovi\n"
-"SILO-t kõvakettale kirjutada või mõni muu operatsioonisüsteem SILO\n"
-"ära kustutab või ei õnnestu SILO-t Teie riistvara peal kasutada.\n"
-"Alglaadmisflopi on kasutatav ka hädaabikettana, kui kõvakettal oleva\n"
-"failisüsteemiga peaks mingi õnnetus juhtuma. Hoidke end ja Teid hoiab\n"
-"ka Jumal!\n"
-"\n"
-"Alglaadimisketta loomiseks asetage flopi esimesse seadmesse ning vajutage\n"
-"\"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Esimene flopiseade"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Teine flopiseade"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Jäta vahele"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Isetehtud alglaadimisketas annab Teile võimaluse laadida Linux flopilt\n"
-"sõltumata tavaliselt alglaadijast. See võib abiks olla, kui Te ei soovi\n"
-"LILO-t (grubi) kõvakettale kirjutada või mõni muu operatsioonisüsteem LILO\n"
-"ära kustutab või ei õnnestu LILO-t Teie riistvara peal kasutada.\n"
-"Alglaadmisflopi on kasutatav ka hädaabikettana, kui kõvakettal oleva\n"
-"failisüsteemiga peaks mingi õnnetus juhtuma. Hoidke end ja Teid hoiab\n"
-"ka Jumal!"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Flopiseade ei ole kättesaadav"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Vali flopiseade, mida kasutad alglaadimisketta tegemiseks"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Pane flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Loome alglaadimisketta"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Alglaaduri sätted"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Soovite aboot-i kasutada?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Viga aboot-i installimisel, \n"
-"kas forseerida, riskides esimese partitsiooni hävinguga?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Alglaaduri sätted"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Alglaaduri installimine ebaõnnestus. Tekkis järgnev viga:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"You will need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  Hold down Command-Option-O-F\n"
-" at reboot and enter:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Madal"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Keskmine"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Kõrge"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Valige turvatase"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Pange palun tühi flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Loon kiirpaigaldusflopi"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Mõned sammud ei ole lõpule viidud\n"
-"\n"
-"Olete kindel, et väljute programmist?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Õnnitlen, installimine on edukalt lõpetatud.\n"
-"Võtke palun välja flopi ja/või CD ja vajutage Enter alglaadimiseks.\n"
-"\n"
-"Informatsiooni selle distributsiooni paranduste kohta (Errata) saab\n"
-"Mandrake Linux koduleheküljelt http://www.mandrakelinux.com/.\n"
-"\n"
-"Abi süsteemi edasiseks konfigureerimiseks saab eelkõige dokumendist\n"
-"\"Official Mandrake Linux User's Guide\""
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Loo kiirpaigaldusflopi"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Automaatne install võib olla ka sedavõrd tegija,\n"
-"et kasutab ära kogu kõvaketta !!\n"
-"\n"
-"Võite valida ka lihtsalt installi kordamise.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automaatne"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Korda"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Salvest paketivalik"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux installimine %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr " <Tab>/<Alt-Tab> väljade vahel  | <Space> valib | <F12> järgmine samm "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu puudub"
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "Valige tegevus"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Edasijõudnud"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Palun oodake"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Ava puu"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Sule puu"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Sorteeritud või sorteerimata"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Mitmeselt mõistetav (%s), palun täpsustage\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Halb valik, proovige palun uuesti\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (vaikimisi %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Teie valik? (vaikimisi %s)"
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Teie valik? (vaikimisi %s, `none' - ei midagi)"
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "T¨ehhi (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Saksa"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "DVORAK"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Hispaania"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Soome"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Prantsuse"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norra"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Poola"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Vene"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Rootsi"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Briti"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "US"
-
-#: ../../keyboard.pm_.c:159
-#, fuzzy
-msgid "Albanian"
-msgstr "Iraani"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armeenia (vanem)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armeenia (trükimasin)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armeenia (foneetiline)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Aserbaidþaani (ladina)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belgia"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulgaaria"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiilia (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Valgevene"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Ðveitsi (Saksa asetus)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Ðveitsi (Prantsuse asetus)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Tðehhi (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Saksa (ilma sammuta)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Taani"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "DVORAK (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "DVORAK (Norra)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Eesti"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruusia (vene)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruusia (ladina)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Kreeka"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Ungari"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Kroaadi"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Iisraeli"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Iisraeli foneetiline"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iraani"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islandi"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Itaalia"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Jaapani 106 klahviga"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Korea"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Ladina-Ameerika"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Leedu AZERTY (vanem)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Leedu AZERTY (uuem)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Leedu numbrireaga QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Leedu foneetiline QWERTY"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "Asukoht"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Makedoonia"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Hollandi"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Poola (QWERTY)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Poola (QWERTZ)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugali"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Quebec)"
-
-#: ../../keyboard.pm_.c:217
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Vene (Yawerty)"
-
-#: ../../keyboard.pm_.c:218
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Vene (Yawerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Vene (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Sloveenia"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaki (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaki (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Aserbaidþaani (kirillitsa)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Tai"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Tai"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Türgi (\"F\" mudel)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Türgi (\"Q\" mudel)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukraina"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "US (rahvusvaheline)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnami numbrireaga QWERTY"
-
-#: ../../keyboard.pm_.c:240
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslaavia (koos kirillitsaga)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Ringühendus %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Eemalda enne kettarühmad (logical volumes)\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Suni hiir"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Tavahiir"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Lihtsalt PS2 rattaga hiir"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 nupp"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Tavaline"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Ratas"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "seerial"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Lihtsalt 2-nupuline hiir"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Lihtsalt 3-nupuline hiir"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC seeria (seerial)"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech (seerial, vana C7 tüüpi)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "siinihiir"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 nuppu"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 nuppu"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "ei soovi"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Hiirt ei ole"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Palun testige hiirt"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Hiire aktiveerimiseks"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "KEERUTAGE RATTAKEST!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Lõpeta"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Järgmine ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Eelmine"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Kas see on sobiv?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Loo internetiühendus"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Kõige tavalisem ühendusviis ADSL jaoks on pppoe.\n"
-"Mõnel juhul aga kasutatakse pptp-d, harva dhcp-d.\n"
-"Kui Te ei tea, kasutage pppoe-d"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Mis DHCP klienti soovite kasutada?\n"
-"Vaikimisi on dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ühtki võrgukaarti ei õnnestunud tuvastada\n"
-"Seega ei saa ka sellist ühendust seadistada."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Valige võrguliides"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Palun valige, millist võrguliidest soovite internetiühenduse jaoks kasutada"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "võrgukaarti ei leitud"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Võrguseadistused"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Palun sisestage oma masina nimi.\n"
-"Seda nõuavad ka mõned DHCP serverid.\n"
-"Masina nimi peab olema esitatud täiskujul,\n"
-"nagu ``minumasin.minufirma.ee''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Masinanimi"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Võrgu sätete abimees"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Väline ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Sisemine ISDN kaart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Millist ISDN ühendust kasutate?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Leitud tulemüüri sätted!"
-
-#
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Leitud tulemüüri sätted!"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN sätted"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Vali oma teenusepakkuja.\n"
-" Kui see ei ole nimekirjas, vali Tundmatu"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Laadimisprotokoll"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Euroopa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Ülejäänud maailm"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Ülejäänud maailm \n"
-" ilma D-kanalita"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Mis protokolli soovite kasutada?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Mis tüüpi kaart Teil on?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Ei tea"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Kui Teil on ISA kaart, siis peaks järgmised väärtused olema õiged.\n"
-"\n"
-"Kui Teil on PCMCIA kaart, peaksite Te ise teadma selle IRQ ning IO "
-"väärtusi.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Katkesta"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Jätka"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Milline on Teie ISDN kaart?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Leidsin küll PCI ISDN kaardi, kui selle tüüp on tundmatu. Palun valige üks "
-"PCI kaart järgmisel sammul."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "PCI ISDN kaarti ei leitud. Palun valige üks järgmisel sammul."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Millisesse seerialporti on Teie modem ühendatud?"
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "DialUp parameetrid"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Ühenduse nimi"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Sissehelistamiskeskuse number"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Kasutajakonto"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Skriptipõhine"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Terminalipõhine"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Domeeninimi"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Esimene nimeserver (soovituslik)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Teine nimeserver (soovituslik)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Saate ühenduse katkestada või uuesti seadistada."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Saate seadistada ühenduse uuesti."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Hetkel olete Internetiga ühendatud."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Saate ühenduda Internetti või seadistada ühendus uuesti."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Hetkel ei ole Te Internetti ühendatud."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Loo internetiühendus"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Katkesta internetiühendus"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Seadista võrguühendus (kohtvõrk või Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Internetiühenduse seadistamine"
-
-#: ../../network/netconnect.pm_.c:96
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Saate ühenduse katkestada või uuesti seadistada."
-
-#: ../../network/netconnect.pm_.c:105
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Saate ühenduse katkestada või uuesti seadistada."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Võrgu sätted"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Võrguühendus on juba seadistatud, sest installitakse ju võrgust.\n"
-"Kui soovite neid seadistusi säilitada, valige OK, muidu katkestage ja saate "
-"seadistada uuesti.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Internetiühenduse Abimees\n"
-"\n"
-"Nüüd hakkame internetiühendust seadistama.\n"
-"Kui Te ei soovi automaatset tuvastamist siis jätke see märkimata.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Valige profiil, mida seadistada"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Kasuta automaattuvastust"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Otsin printerit..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Tavaline modemiühendus"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "leiti port %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN ühendus"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "tuvastati %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, fuzzy
-msgid "ADSL connection"
-msgstr "LAN ühendus"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "leiti liidesel %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Kaabliühendus"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Kaabliühendus"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "LAN ühendus"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "võrgukaart(i) leiti üles"
-
-#: ../../network/netconnect.pm_.c:190
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Valige kasutatav vahend"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:215
-#, fuzzy
-msgid "Internet connection"
-msgstr "Internetiühenduse jagamine"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Kas soovite luua ühenduse juba alglaadimisel?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Võrgusätted"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Kas soovite võrguühendust taaskäivitada?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Õnnitleme, võrgundus ja internetiühendus on seadistatud.\n"
-"\n"
-"Sätted salvestatakse nüüd.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Soovitame taaskäivitada ka X keskkonna, et vältida võimalikke\n"
-"masinanime muutmisest tingitud probleeme."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"HOIATUS: See seade on juba seadistatud Interneti jaoks.\n"
-"Valige lihtsalt OK, et sätteid mitte muuta."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Palun andke IP parameetrid selle masina jaoks.\n"
-"Kõik read tuleb sisestada IP-aadressi kujul\n"
-"(Näiteks 12.34.56.78)"
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Seadistame võrgukaardi %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (juhtprogramm %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP-aadress"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Võrgu mask"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Automaatne IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-aadress peab olema formaadis 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Palun sisestage oma masina nimi.\n"
-"Masina nimi peab olema esitatud täiskujul,\n"
-"nagu ``minumasin.minufirma.ee''.\n"
-"Kui Teil on vaikimisi lüüs, siis sisestage ka selle IP-aadress"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "Nimeserver"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Vaikelüüs"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Lüüsipoolne seade"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Vahendajate sätted"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP vahendaja"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP vahendaja"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Vahendaja peab olema kujul http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Vahendaja peab olema kujul ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Interneti sätted"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Kas soovite oma internetiühendust proovida?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Testime Teie ühendust..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Süsteem on nüüd Internetti ühendatud"
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Turvakaalutlusel katkestan nüüd ühenduse."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Paistab, et süsteem ei ole Internetti ühendatud.\n"
-"Palun seadistage ühendus uuesti."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Internetiühenduse sätted"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Palun täida allpool olev väli"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "Kaardi IRQ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Kaardi mälu (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "Kaardi IO"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "Kaardi IO_0"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "Kaardi IO_1"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Teie telefoninumber"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Teenusepakkuja tunnus (näiteks minuisp.ee)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Sissehelistamiskeskuse number"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 (võib jätta tühjaks)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 (võib jätta tühjaks)"
-
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "Klaviatuuri valik"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Valimisviis"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-#, fuzzy
-msgid "Connection speed"
-msgstr "Ühenduse tüüp: "
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Ühenduse tüüp: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Kasutajatunnus"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Salasõna"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Sellel platformil ei saa laiendatud partitsiooni luua"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Partitsioonitabelis on miskipärast tühi koht, aga see ei ole kasutatav.\n"
-"Ainuke lahendus on nihutada primaarset partitsiooni, et auk satuks "
-"laiendatud partitsioonide kõrvale"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Taastamine failist %s ebaõnnestus: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Kõlbmatu tagavarakoopia"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Viga faili %s kirjutamisel"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Teie kõvakettal juhtub imelikke asju. \n"
-"Andmete pidevuse kontroll ebaõnnestus. \n"
-"See tähendab, et kettale kirjutamisel tekivad jamad"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "vajalik"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "tähtis"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "väga kena"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "kena"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "võib olla"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Kohalik printer"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Võrguprinter"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "CUPS printserver"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "lpd printserver"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Võrguprinter (socket)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Printserver:"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Printeri seadme URI"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(moodul %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Vali printeri ühendusviis"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kuidas on see printer ühendatud?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"Kui võrgus on CUPS server, siis ei ole Teil vaja siin\n"
-"printereid seadistada, need leitakse automaatselt.\n"
-"Kui kahtlete, valige \"CUPS printserver\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Ei soovi"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Valige uus vaikimisi kasutaja :"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-#, fuzzy
-msgid "Close"
-msgstr "Hiir"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "Võrguprinter"
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-aadress peab olema formaadis 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Pordi number peab olema ikkagi number"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "Kohalik printer"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "CUPS serveri IP"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Alglaaduri stiil"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Otsin printerit..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Proovin porte"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Leiti printer, nimega \"%s\" "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Otse ühendatud printer"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Mis porti on Teie printer ühendatud? \n"
-"(paneme tähele, et /dev/lp0 on sama mis LPT1:)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Printeri seade"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Võrguprinteri sätted"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Et kasutada teise masina lpd printerit, peate sisestama\n"
-"printserveri nime ja prindijärjekorra nime, mida soovite\n"
-"serveril kasutada."
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "Printserveri nimi:"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Võrguprinter"
-
-#: ../../printerdrake.pm_.c:320
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Printserveri nimi:"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Printserveri nimi:"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) printeri sätted"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Et printida SMB printerile, peate andma vastava server SMB nimi\n"
-"(NB! See ei pruugi kokku langeda TCP/IP nimega!) ja võibolla ka\n"
-"printserveri IP-aadressi, samuti ka serveri poolt jagatava printeri\n"
-"nime ning serveri poolt aktsepteeritud kasutajatunnuse, salasõna ja töögrupi"
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "SMB serveri nimi"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "SMB serveri IP"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Jagatav printer"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Töögrupp"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "NetWare printeri sätted"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Et kasutada NetWare printerit, peate sisestama NetWare printserveri\n"
-"nime (NB! See võib olla erinev tema TCP/IP nimest!) samuti nagu ka\n"
-"prindijärjekorra nime serveril ning kasutajatunnuse ja salasõna"
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Printserver:"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Prindijärjekorra nimi:"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Pistikprinteri sätted"
-
-#: ../../printerdrake.pm_.c:528
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Sisestage palun printeri masinanimi ja võimaluse\n"
-"korral pordi number"
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "Printeri nimi"
-
-#: ../../printerdrake.pm_.c:537
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Printeri nimi"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Printeri seadme URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Printeri nimi"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Kirjeldus"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Asukoht"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:793
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Printeri ühendusviis"
-
-#: ../../printerdrake.pm_.c:794
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Mis tüüpi printer see on?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Interneti sätted"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Interneti sätted"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "Proovin porte"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-#, fuzzy
-msgid "No test pages"
-msgstr "Jah, trüki mõlemad testleheküljed"
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "Printer"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standardtööriistad"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Trükitakse testlehekülg(i)..."
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "Trükitakse testlehekülg(i)..."
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Trükitakse testlehekülg(i)..."
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testlehekülg on saadetus trükideemonile.\n"
-"Nüüd võib minna natuke aega.\n"
-"Staatus:\n"
-"%s\n"
-"\n"
-"Kas tulemust on juba näha?"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testlehekülg on saadetud trükideemonile.\n"
-"Nüüd võib minna natuke aega.\n"
-"Staatus:\n"
-"%s\n"
-"\n"
-"Kas tulemust on juba näha?"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Printerit ei ole"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Seiskame võrguliidesed"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "Otse ühendatud printeri sätted"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Interneti sätted"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Printeri nimi tohib sisaldada vaid tähti, numbreid ja alakriipsu"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "Printerit ei ole"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Sea printer"
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Testime Teie ühendust..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Võrgusätted"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor ei ole seadistatud"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Võrguseadistused"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Millist printimissüsteemi soovite kasutada?"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Kõrge"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoiline"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Millist printimissüsteemi soovite kasutada?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Vali printeri ühendusviis"
-
-#: ../../printerdrake.pm_.c:1728
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Millist printimissüsteemi soovite kasutada?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Printeri sätted"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Otse ühendatud printeri sätted"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:1845
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Kas soovite printerit seadistada?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Tavakasutus"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Vaikimisi)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "CUPS printserver"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "CUPS printserver"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-#, fuzzy
-msgid "Add printer"
-msgstr "Printerit ei ole"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Interneti sätted"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Internetiühenduse jagamine"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Printeri ühendusviis"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "Trükitakse testlehekülg(i)..."
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "Võrguprinter"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Kas soovite võrguühendust taaskäivitada?"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Vahendajate sätted"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Port"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Vahendaja peab olema kujul http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "Pordi number peab olema ikkagi number"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Vahendaja peab olema kujul ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Vaikimisi sisenemine"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Salasõna"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Salasõna puudub"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Salasõnad ei klapi"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Juba vormindatud RAID-ile (md%d) ei saa partitsiooni lisada"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ei saa kirjutada faili %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ebaõnnestus"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ebaõnnestus (puudub 'raidtools'?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ei ole piisavalt partitsiooni RAID-%d jaoks\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-"Anacron käivitab programme perioodiliselt analoogiliselt cron-ile.\n"
-"Kasutage seda juhul kui Teie arvuti ei tööta 24h."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd on kasutusel põhiliselt sülearvutites, akude täituvuse jälgimiseks.\n"
-"Samuti suudab see aku tühjenemisel süsteemi viisakalt maha võtta."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Laseb käivitada ühekordseid käske etteantud ajal või ootab süsteemi\n"
-"koormuse laskumist käsu käivitamiseks piisavale tasemele."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron on UNIXi süsteemide standardvahend kasutaja programmide perioodiliseks\n"
-"käivitamiseks. Vixie cron sisaldab lisaks veel turvalisust ja kasutus-\n"
-"mugavust tõstvaid omadusi. Soovitav süsteemile mis töötab 24h"
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM annab võimaluse kasutada hiirt ka tekstikonsoolil. Lisaks tavalisele\n"
-"lõikamisele/kleepimisele saab kasutada ka menüüsüsteeme."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache on maailma juhtiv veebiserveri programm. Tõenäoliselt\n"
-"ka võimsaim."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Interneti \"superserver\", nimega inetd laseb käivitada mitmeid võrgu-\n"
-"teenustel, nagu telnet, ftp, rsh, rlogin jne."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"See programm laeb süsteemi käivitumisel klaviatuuripaigutuse vastavalt\n"
-"failis /etc/sysconfig/keyboard kirjeldatule."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr "lpd on trükideemon, ilma selleta ei ole võimalik printida."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) on kasutusel nimeserverites, mis teenindavad DNS\n"
-"hierarhiat, tõlkimaks nimesid IP-aadressideks"
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Ühendab ja lahutab kõiki võrgufailisüsteeme (nii NFS, SMB\n"
-"kui ka NCP)"
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr "Aktiveerib süsteemi laadimisel Teile vajalikud võrguliidesed."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS on UNIXi keskkonna standardne failijaotusprotokoll. See programm täidab\n"
-"NFS serveri funktsioone, ja konfigureeritakse failis /etc/exports."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS on UNIXi keskkonna standardne failijaotusprotokoll. See programm täidab\n"
-"NFS failide lukustamise funktsioone. Vajalik serveerimisel."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA tugi on tavaliselt vajalik sülearvutitele võrgu- ja modemiliideste\n"
-"lisamiseks."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper haldab RPC ühendusi, mida kasutavad NFS ja NIS. Neil \n"
-"serveritel on see hädavajalik."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix on meili transpordiagent, see tähendab programm, mis\n"
-"toimetab meili ühest masinast teise."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Salvestab ja taastab juhuarvude genereerimiseks vajaliku süsteemse\n"
-"entroopiasalve."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed on RIP deemon, mis vahetab selle protokolli alusel marsruutimis-\n"
-"infot. Kui Teil on RIP kasutusel, on vajalik ka routed."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokoll laseb üle võrgu saada informatsiooni süsteemi\n"
-"töö kohta. Ettevaatust!"
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokoll laseb üle võrgu saada informatsiooni süsteemi\n"
-"kasutajate kohta. Ettevaatust!"
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokoll laseb üle võrgu saada informatsiooni süsteemi\n"
-"kasutajate kohta. Ettevaatust!"
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Käivita X-Windows alglaadimisel"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr "syslog-i kaudu toimub süsteemis toimiva logimine. Vajalik!"
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:88
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Stardib X fondiserveri, selleta X ei käivitu."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Valige, millised teenused tuleks alglaadimisel käivitada"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "Printer"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "Töömood"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Võrguprinteri sätted"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Server, Andmebaasid"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "seade"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "käimas"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "peatatud"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Teenused ja deemonid"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Selle teenuse kohta ei oska\n"
-"lisainformatsiooni anda."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Alglaadimisel"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Paketi %s installimine"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Partitsioonitabel on loetamatu, liiga rikutud DrakX-i jaoks :(\n"
-"Proovin loetamatud kirjed puhastada"
-
-#: ../../standalone/drakautoinst_.c:44
-#, fuzzy
-msgid "Error!"
-msgstr "Viga"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Paigaldusjärgsed sätted"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Alglaaduri stiil"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Õnnitleme!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Internetiühenduse jagamine"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetiühenduse jagamine töötab"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetiühenduse jagamine on juba seadistatud ja see on\n"
-"ka praegu aktiivne.\n"
-"\n"
-"Mida Te soovite teha?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "keela"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "tühista"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "seadista uuesti"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Peaten serverid..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Internetiühendust nüüd enam ei jagata"
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internetiühendust hetkel ei jagata"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetiühenduse jagamine on juba seadistatud aga hetkel\n"
-"on see keelatud.\n"
-"\n"
-"Mida Te soovite teha?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "luba"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Käivitan serverid..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Internetiühenduse jagamine nüüd töötab"
-
-#: ../../standalone/drakgw_.c:182
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Nüüd on Teil võimalik seadistada oma arvutit internetiühendust jagama.\n"
-"\n"
-"Märkus: kohtvõrgu (LAN) jaoks on vajalik eraldi võrgukaardi olemasolu."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Liides %s (kasutab moodulit %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Liides %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Teie süsteemis ei ole võrgukaarti!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ühtki võrgukaarti ei ole hetkel seadistatud. Palun kasutage selleks "
-"riistvara sätteseadjat."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Võrguliides"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Teil on vaid üks seadistatud võrguliides:\n"
-"\n"
-"%s\n"
-"\n"
-"Kohtvõrgu sätted seotakse selle liidesga."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Palun valige millist võrguliidest soovite kasutada kohtvõrgu\n"
-"jaoks."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Hoiatan, võrguliides on juba seadistatud. Järgnevalt seadistame selle uuesti."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Võimalik kohtvõrgu aadressi konflikt %s konfiguratsioonis!\n"
-
-#
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Leitud tulemüüri sätted!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Hoiatus! Leiti olemasolevad tulemüüri sätted. Tõenäoliselt peaksite need "
-"hiljem üle vaatame."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Seadistan..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Häälestan skriptid, installin tarkvara, käivitan serverid..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Probleemid paketi %s installimisel"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Kõik on seadistatud.\n"
-"Nüüd saate internetiühendust jagada teistele kohtvõrgu arvutitele, kasutades "
-"neil automaatset konfigureerimist (DHCP)"
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Internetiühenduse jagamine on juba seadistatud aga hetkel keelatud."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"Internetiühenduse jagamine on juba seadistatud ja see on praegu aktiivne."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Internetiühenduse jagamist ei ole kunagi seadistatud"
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Interneti jagamise seadistamine"
-
-#: ../../standalone/drakgw_.c:631
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Internetiühenduse jagamise Abimees!\n"
-"\n"
-"%s\n"
-"\n"
-"Valige Abimehe käivitamiseks ``OK''"
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Võrgusätted (%d liidest)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profiil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Kustuta profiil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Profiil kustutamiseks:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Uus profiil..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Masinanimi: "
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Internetiühendus"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Tüüp: "
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Vaikelüüs:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Liides:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Olek:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Ühendatud"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Ei ole ühendatud"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Ühenda..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Lahuta..."
-
-#: ../../standalone/draknet_.c:215
-#, fuzzy
-msgid "Starting your connection..."
-msgstr "Testime Teie ühendust..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Sulgeme nüüd ühenduse..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Võrguühendus ei ole suletud.\n"
-"Proovige seda teha käsitsi, käivitades\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"juurkasutajana."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Süsteem on nüüd Internetist lahutatud."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Seadiste internetiühendus..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "LAN sätted"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Juhtprogramm"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Liides"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protokoll"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "State"
-msgstr "Olek:"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Seadista kohtvõrk (LAN) ..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Rakenda"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Palun oodake... Rakendan seadistusi"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "LAN sätted"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Võrgukaart %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Laadimisprotokoll"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Käivitub laadimisel"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "activate now"
-msgstr "Aktiivne"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "desactivate now"
-msgstr "Aktiivne"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Internetiühenduse seadistamine"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Internetiühenduse seadistamine"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Ühenduse tüüp: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parameetrid"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Võrgukaart"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Tere tulemast, kräkkerid"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Vähene"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoiline"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Seda tase muudab küll süsteemi lihtsalt kasutatavaks, kui väga\n"
-"haavatavaks: ligipääsupiirangute puudumise tõttu ei peaks arvutit ühendama\n"
-"ei teiste arvutitega ega ka mitte Internetti."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Salasõnad on nüüd kasutusel, kuid võrku ühendamine ei ole siiski soovitav."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr "Turvataset on parandatud, lisatud on hoiatusi ja piiranguid."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"See on sobilik turvatase arvutile, mis ühendatakse Internetti kui klient."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr "Sellel turvatasemel võib süsteemi kasutada Internetis ka serverina."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Süsteem on täielikult suletud. Võrgust kasutamine on võimalik ainult\n"
-"spetsiaalselt loodud juurdepääsuteid kasutades."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "Turvataseme seadmine"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Valige X server"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Turvataseme seadmine"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Juhtimiskeskus"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Valige kasutatav vahend"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "kasutamiseks: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Kas soovite konsoolil kasutada BackSpace-i kui Delete?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Vaheta CD plaat"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Palun sisestage installeerimise CD pealdisega lugejasse ja vajutage <OK>.\n"
-"Kui teil säherdust ei ole, vajutage <Katkesta>, et kiiruendust vältida."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ei saa kiiruuendust alustada !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "ei leitud: serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Teeskleme keskmist hiirenuppu?"
-
-#
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Tulemüüri sätted"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Tulemüüri sätted"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Tulemüür\n"
-"\n"
-"Tulemüüri olete juba seadistanud.\n"
-"Valige 'Seadista', et midagi muuta"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Tulemüür\n"
-"\n"
-"Valige 'Seadista', selle seadistamiseks nüüd"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Valige sobiv keel"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Valige paigaldusmeetod"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Kõvaketta leidmine"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Hiire seadmine"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Klaviatuuri valik"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Turvalisus"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Failisüsteemid"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Vormindamine"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Pakettide valik"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Süsteemi installimine"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Tavakasutaja"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Võrgusätted"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Teenuste sätted"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Loo alglaadimisflopi"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Alglaaduri sätted"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Seadista X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Välju programmist"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall seadistamine\n"
-"\n"
-"Selle vahendiga saate luua lihtsa kaitse Interneti ohtude vastu.\n"
-"Kui vajate võimsat tulemüüri, vaadake palun\n"
-"spetsiaalset MandrakeSecurity Firewall distributsiooni."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Nüüd küsitakse Teilt millistele teenustele soovite lubada ligipääsu\n"
-"Internetist. Palun mõelge hoolega, nende vastuste üle, sest tegu on\n"
-"ju Teie arvuti turvalisusega.\n"
-"\n"
-"Palun, kui te ei soovi hetkel mõnd neist kasutada, pange see igaks\n"
-"juhuks tulemüüri taha. Hiljem on Teil soovi korral vaba voli kõike\n"
-"uuesti lubada."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Kas sellel arvutil hakkab tööle veebiserver, mida külastatakse kogu\n"
-"Internetist? Kui vajate ligipääsu vaid samast arvutist, vastake\n"
-"siin EI.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Kas sellel arvutil hakkab tööle nimeserver? Kui Te seda ei soovi\n"
-"siis vastake palun ei.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Kas soovite sisenevaid SSH ühendusi? SSH on turvaline asendus telnetile.\n"
-"Telneti kaudu üle võrgu masinasse sisenemine on äärmisel ebaturvaline\n"
-"kuna sel teel on lihtsate vahenditega võimalik võrgus paroole varastada.\n"
-"SSH korral on ühendus krüptitud ja pealtkuulamine praktiliselt välistatud."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Kas soovite lubada sisenevaid telneti ühendusi?\n"
-"See on tõeliselt ebaturvaline, vastake siin palun Ei ja kasutage\n"
-"telneti asemel SSH-d.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Kas soovite sellel arvuti käivitada avaliku FTP serveri? Kui see on\n"
-"tõesti Teie soov, siis lubage palun ainult anonüümne ligipääs, sest\n"
-"muul juhul tekib jälle paroolide varastamise oht, sest FTP ei tunne\n"
-"krüptimist.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Kas Teil on jooksmas avalik meiliserver? Vastasel juhul on\n"
-"palju turvalisem siia tulemü ette panna.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Kas vajate sellel masinal POP või IMAP serverit?\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Teil on kasutusel 2.2 kernel. Kui IP aadress antakse Teie arvutile\n"
-"dünaamiliselt, siis peaks seda siinkohal lubama.\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Kas see arvuti kuulub võrku, millest masinad sünkroniseerivad\n"
-"omavahel kellaaega? Tõenäoliselt võite selle rahulikult keelata."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Seadistused tehtud. Kas salvestada sätted kettale?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, fuzzy, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Võrgukaart %s: %s"
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Seadme %s avamine kirjutamiseks ebaõnnestus: %s"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Server, Veeb/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Võrguarvuti (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS, SMB, SSH server, vahendaja (proxy)"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kontor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome tööjaam"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Suhtlus Palmi või Visoriga"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Tööjaam"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Tulemüür/marsruuter"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kontoriprogrammid: tekstitöötlus (kword, abiword), tabelarvutus (kspread, "
-"gnumeric), PDF eelvaade jne"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio-värgid: mp3 ja midi, mikserid jms"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Raamatud ja Howto-d Linux ja vabavara kohta"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE tööjaam"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm jt"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimeedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Meili, uudiste, veebi, jututamise ja failiülekande programmid"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Server, Andmebaasid"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Vahendid lihtsamaks süsteemi administreerimiseks"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimeedia - Heli"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utiliidid"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentatsioon"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsooliprogrammid"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Interneti tööjaam"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimeedia tööjaam"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN sätted"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Veel graafilisi töölaudu (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, graafiline töökeskkond ja rida seonduvaid rakendusi"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Graafiline keskkond"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Arendus"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache ja Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Vahendid CD-de kirjutamiseks"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kontori tööjaam"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm jne"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Graafikaprogrammid nagu Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C ja C++ arendusteegid, programmid ja päisefailid"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Failiserver"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Server, Meil/grupitöö/uudised"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Mänguvahend"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video esitamine ja redigeerimine"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimeedia - Graafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Meelelahutus: arcade, boards, strategy jne"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr "Komplekt programme meili ja uudiste lugemiseks ning veebi brausimiseks"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arhiveerimine, emuleerimine, monitoorimine"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Isiklikud finantsid"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Graafiline töökeskkond koos kasutajasõbralike rakendustega"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Mitmete protokollide, sealhulgas ssh kliendid"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Internetiühendus"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Heli ja video esitamine ja redigeerimine"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Muud graafilised töölauad"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editorid, shellid, terminalid, failihaldus"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Isiklike finantside haldusvahendid"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Mängud"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Isikliku info haldamine"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimeedia - CD kirjutamine"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Teadustööjaam"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "ei saa lugeda faili /etc/sysconfig/autologin: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Kas soovite võrguühendust taaskäivitada?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Kas olete nõus?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Nüüd taaskäivitan võrguliidese:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Kas olete valmis võrguliidese %s taaskäivitamiseks?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Tavaline valik on \"/dev/hda\" (esimese IDE kanali master), kui Te ei\n"
-#~ "tea täpselt, et tahate teisiti teha."
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Kirjeldatud on järgnevad prindijärjekorrad.\n"
-#~ "Te võite neid lisada ning olemasolevaid muuta."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Ühenduse tüüp: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Valige uus vaikimisi kasutaja :"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Palun testige hiirt"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Valige keel süsteemi installimiseks ja kasutamiseks."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Et installimist jätkata, peate nõustuma ülaltoodud "
-#~ "litsentsitingimustega.\n"
-#~ "\n"
-#~ "\n"
-#~ "Palun valige \"Nõus\", kui nõustute nendega.\n"
-#~ "\n"
-#~ "\n"
-#~ "Palun valige \"Keeldun\", kui ei pea neile tingimistele allumist "
-#~ "võimalikuks. Installimine lõpetatakse, tegemata Teie süsteemis muutusi."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Valige klaviatuuripaigutus ülaltoodud nimekirjast"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Kui soovite, et peale installimist oleks võimalik kasutada veel "
-#~ "erinevaid\n"
-#~ "keeli, valige need ülaltoodud nimekirjast. Valik \"Kõik\" lisab toe\n"
-#~ "kõigile keeltele."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Valige:\n"
-#~ "\n"
-#~ "  - Isetehtud: Olete Linuxiga tuttav ja soovite süsteemi kohandada "
-#~ "vastavalt\n"
-#~ "   Teie vajadustele. Järgmisena saate teha valikud sõltuvalt Teie "
-#~ "arvuti \n"
-#~ "   edaspidisest kasutusalast.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
-#~ "   süsteemi, mis sobiks nagu valatult Teie täpsete ootustega.\n"
-#~ "   Aga palun, palun: ÄRGE VALIGE SEDA, KUI TE TÄPSELT EI TEA, MIDA TEETE!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Nüüd määrake oma arvuti peamne kasutusala. Valikud on:\n"
-#~ "\n"
-#~ "* Tööjaam: valige, kui kavatsete oma arvutit rakendada igapäevategemiste "
-#~ "tarvis (kontorirakendused,\n"
-#~ "  graafika ja muu selline).\n"
-#~ "\n"
-#~ "\n"
-#~ "* Arendus: installitakse täiskomplekt vahendeid eri programmeerimiskeelte "
-#~ "kasutamiseks, allikkoodi loomiseks,\n"
-#~ "  kompileerimiseks, silumiseks jne.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: valige see, kui vajate Mandrake Linux serverit. Saate "
-#~ "serveerida faile (NFS või SMB), printida\n"
-#~ "  (Unixi stiilis lp või Windowsi SMB), lisaks andmebaasid, "
-#~ "veebirakendused jms. Installimata\n"
-#~ "  jäetakse graafiline kasutajaliides (KDE, GNOME...)."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Nüüd võite valida paketigruppe installimiseks või uuendamiseks\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX kontrollib, kas Teil on ikka piisavalt vaba ruumi nende kõigi "
-#~ "jaoks.\n"
-#~ "kui mitte, hoiatab ta Teid. Kui Te hoiatusest ei hooli jäetakse "
-#~ "automaatselt\n"
-#~ "kõrvale vähemolulised paketid.\n"
-#~ "Nimekirja lõpus saate valida \"Valik paketthaaval\"; sel juhul aga peate\n"
-#~ "läbi sirvima üle 1000 üksiku paketi..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Nüüd saate pakette ükshaaval installimiseks valida\n"
-#~ "\n"
-#~ "\n"
-#~ "Paketipuud saate avada ja sulgeda vasakpoolses nurgas asuvatest nuppudest."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Kui Teil on olemas kõik ülaltoodud CD-d, klikkige <OK>.\n"
-#~ "Kui Teil ei ole ühtki neist, klikkige <Katkesta>.\n"
-#~ "Kui puuduvad mõned CD-d, jätke märgituks vaid olemasolevad ja siis <OK>."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Kui soovite oma arvuti ühendada Internetti või kohtvõrku, tehke palun\n"
-#~ "õige valik. Välise seadme korrektseks tuvastamiseks on vajalik, et see "
-#~ "oleks\n"
-#~ "sisse lülitatud ja arvutiga ühendatud\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Te ei soovi võrguühendust kasutada, valige \"Keela võrguühendus\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite võrguühenduse seadistada hiljem, valige \"Tehtud\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Modemit ei leitud. Palun valige seerialport, kuhu see on ühendatud.\n"
-#~ "\n"
-#~ "\n"
-#~ "Igaks juhuks: esimese seerialpordi (\"COM1\" Microsoft Windowsis) nimi\n"
-#~ "on GNU/Linux süsteemis \"ttyS0\"."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Sisestage sissehelistamiskeskuse andmed. Kui Te neid ei tea\n"
-#~ "või kahtlete, saate oma teenusepakkujalt (ISP-l) kindlasti abi.\n"
-#~ "Näiteks info nimeserveri (DNS) kohta saab tavaliselt ühenduse\n"
-#~ "loomise ajal automaatselt"
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Kui Teil on väline modem, siis lülitage see palun nüüd sisse, et DrakX "
-#~ "saaks seda tuvastada."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Palun lülitage modem sisse ja valige nimekirjast õige."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Kui Te ei ole kindlad, et ülaltoodud informatsioon vastab tõele\n"
-#~ "või Te ei tea, mida sisestada, küsige abi oma internetiteenuse pakkujalt\n"
-#~ "(ISP-lt). Näiteks info nimeserveri (DNS) kohta saab tavaliselt ühenduse\n"
-#~ "loomise ajal automaatselt"
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Nüüd sisestage oma arvuti nimi, kui see on vajalik. Kui kahtlete, siis "
-#~ "peaksite küsima lisainformatsiooni oma ISP käest."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Võrguliidese seadistamiseks on vajalik:\n"
-#~ "\n"
-#~ "   * IP-aadress: kui Te seda ei teha, küsige oma võrguhaldurilt või\n"
-#~ "internetiteenuse pakkujalt (ISP).\n"
-#~ "\n"
-#~ "   * Võrgumask: \"255.255.255.0\" on tavaliselt sobiv. Igaks juhuks "
-#~ "võite\n"
-#~ "võrguhalduri või ISP käest üle küsida.\n"
-#~ "\n"
-#~ "   * Automaatne IP: Kui Teie võrgus on kasutusel BOOTP või DHCP.\n"
-#~ "Selle valimisel ei pea välja \"IP-aadress\" täitma. Kui kahtlete\n"
-#~ "küsige jällegi oma võrguhaldurilt või ISP-lt."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Kui Teie võrgus on kasutusel NIS, valige \"Kasuta NIS-i\". Kahtluse "
-#~ "korral\n"
-#~ "küsige võrguhaldurilt."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Kui vaja, sisestage oma süsteemi nimi. Kui Teil ei\n"
-#~ "ole ühtki head mõtet, jätke see rida tühjaks"
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Nüüd sisestage oma sissehelistamisteenuse pakkuja andmed. Kui ei ole "
-#~ "kindel,\n"
-#~ "mida kuhu sisestada, küsige oma ISP käest üle."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Kui peate kasutama vahendajaid (tulemüüri vms), seadistage need nüüd. "
-#~ "Kui\n"
-#~ "kahtlete, on abiks võrguhaldur või ISP"
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Krüptopakette saate installida pärast Internetiühenduse seadistamist.\n"
-#~ "Esmalt valige peegel, kust soovite pakette alla laadida ja seejärel\n"
-#~ "valige paketid.\n"
-#~ "\n"
-#~ "\n"
-#~ "Märkus: krüptopakettide valimisel peate arvesse võtma ka võimalikke\n"
-#~ "õiguslikke piiranguid oma asukohamaal."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Nüüd saate valida ajavõõtme vastavalt oma asukohale."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Teil on võimalus seadistada kas kohalik (Teie arvutiga ühendatud) või\n"
-#~ "võrguprinter (Unix, Netware või Microsoft Windows võrgus)"
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Kui soovite vahetevahel printida, valige palun selleks sobiv meetod, "
-#~ "CUPS\n"
-#~ "või LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS on uus, võimas ja paindlik printimissüsteem Unix keskkonnas (CUPS -\n"
-#~ "Common Unix Printing System). Mandrake Linux kasutab vaikimisi seda.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR on vanem meetod, mis oli kasutusel ka eelmistest Mandrake Linux\n"
-#~ "distributsioonides.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Teil ei olegi printerit, valige \"Ei soovi\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux oskab toimetada mitut tüüpi printeritega. Igaüht neist "
-#~ "seadistatakse\n"
-#~ "erinevalt.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Teie printer on füüsiliselt arvutiga ühendatud, valige \"Kohalik "
-#~ "printer\"\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite kasutada võrguprinterit Unix serveril, valige \"Võrguprinter"
-#~ "\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite kasutada võrguprinteri Windows serveril (või muidu üle SMB\n"
-#~ "protokolli), valige  \"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Palun lülitage oma printer sisse ja laske DrakX-il seda tuvastade.\n"
-#~ "\n"
-#~ "Samuti on vaja sisestada lisainformatsiooni:\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printeri nimi: spuuler kasutab vaikimisi printerit \"lp\". Seega "
-#~ "peab Teil olema vähemalt ühe printeri nimi \"lp\".\n"
-#~ "     Kui Teil ongi ainult üks printer, saate sellele anda ka mitu nime. "
-#~ "Nimed peavad olema eraldatud sümboliga \"|\"\n"
-#~ "     Seega, kui soovite, et nimel oleks ka mingi tähendus, kirjutage "
-#~ "nimeks midagi niisugust: \"Minu printer|lp\".\n"
-#~ "     Printer, mille nimede hulgas on \"lp\", saab olema Teie süsteemi "
-#~ "jaoks vaikimisi printeriks.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * Kirjeldus: see ei ole kohustuslik, kuid võib osutuda vajalikuks, kui "
-#~ "Teil on näiteks mitu kohalikku printerit ja soovite neid võrgus välja "
-#~ "jagada\n"
-#~ "\n"
-#~ "\n"
-#~ "  * Asukoht: kui soovite anda täiendavat informatsiooni printeri "
-#~ "asukohast\n"
-#~ "    Näiteks: \"Teise korruse keskel\".\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Nüüd on vaja lisainformatsiooni.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printeri nimi: spuuler kasutab vaikimisi printerit \"lp\". Seega "
-#~ "peab Teil olema vähemalt ühe printeri nimi \"lp\".\n"
-#~ "     Kui Teil ongi ainult üks printer, saate sellele anda ka mitu nime. "
-#~ "Nimed peavad olema eraldatud sümboliga \"|\"\n"
-#~ "     Seega, kui soovite, et nimel oleks ka mingi tähendus, kirjutage "
-#~ "nimeks midagi niisugust: \"Minu printer|lp\".\n"
-#~ "     Printer, mille nimede hulgas on \"lp\", saab olema Teie süsteemi "
-#~ "jaoks vaikimisi printeriks.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * Spuulkataloog: kataloog, kus spuuler hoiab ajutisi faile enne "
-#~ "printimist. Seda ei ole soovitav muuta.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * Printeri ühendusviis: Kui Teie printer on füüsiliselt Teie arvuti "
-#~ "küljes, valige \"Kohalik printer\".\n"
-#~ "    Kui soovite kasutada printerit UNIX serveri küljes, valige \"lpd "
-#~ "printserver\".\n"
-#~ "\n"
-#~ "\n"
-#~ "   Kui soovite kasutada printerit Microsoft Windows võrgus (või SMB "
-#~ "serveril) valige \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "   Kui soovite kasutada NetWare serveril asuvat printerit, valige "
-#~ "\"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Teie printerit ei õnnestunud tuvastada. Palun abistavat infot võimaliku\n"
-#~ "ühenduspistiku kohta.\n"
-#~ "\n"
-#~ "\n"
-#~ "Enamasti on printer ühendatud esimesse paralleelporti. GNU/Linuxis on "
-#~ "selle\n"
-#~ "nimeks \"/dev/lp0\" ja Microsoft Windowsis \"LPT1\"."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Valige printer ülaltoodud nimekirjast."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Palun valige oma printerile sobivad sätted.\n"
-#~ "Abi saate ilmselt ka printeri dokumentatsioonist.\n"
-#~ "\n"
-#~ "\n"
-#~ "Järgmisel sammul saate oma seadistusi testida ja soovi korral muuta, kui "
-#~ "midagi ei tööta nagu vaja."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Nüüd peate sisestama süsteemi juurkasutaja (root) parooli. Et vähendada\n"
-#~ "eksimisvõimalust, tehke seda kaks korda.\n"
-#~ "\n"
-#~ "\n"
-#~ "Juurkasutaja on süsteemi tähtsaim kasutaja ja ainuke, kes tohib teha\n"
-#~ "muudatusi süsteemi sätetesse. Seepärast valige juurkasutaja parooli "
-#~ "erilise\n"
-#~ "hoolega.\n"
-#~ "\n"
-#~ "Hea salasõna peaks olema kombinatsioon tähtedest ja numbritest \n"
-#~ "ning vähemalt 8 märki pikk. Ärge *kunagi* kirjutage oma parooli üles!\n"
-#~ "\n"
-#~ "\n"
-#~ "Samas ei peaks see olema liiga pikk ja keeruline meelde jätmiseks."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Nüüd saate luua ühe või rohkem \"tavakasutaja\" kontot. Äärmiselt "
-#~ "soovitav\n"
-#~ "on luua igale arvuti kasutajale eraldi konto(d). Sel viisi saab iga "
-#~ "kasutaja\n"
-#~ "valida ise endale sobiva graafilise keskkonna kujunduse ja programmide "
-#~ "sätted.\n"
-#~ "Kõik kasutaja failid saavad hoitud ja kaitstud tema isiklikus "
-#~ "kodukataloogis.\n"
-#~ "\n"
-#~ "\n"
-#~ "Esmalt looge konto iseendale, ka siis kui olete süsteemi ainuke "
-#~ "kasutaja.\n"
-#~ "Ärge tehke oma igapäevatoimetusi juurkasutajana, suurendades sel viisil\n"
-#~ "turvariski! Vale juurkasutaja näpuliigutus võib süsteemi kergesti\n"
-#~ "kasutuskõlbmatuks muuta!\n"
-#~ "\n"
-#~ "\n"
-#~ "Juurkasutaja õigused on ainult administreerimiseks ja hoolduseks,\n"
-#~ "kõike muud tehke palun tavakasutajana"
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Alglaadimisketta loomine on äärmiselt soovitatav. Kui peaks kunagi\n"
-#~ "tekkima probleeme süsteemi laadimisel, või alglaadmisketas olla Teie\n"
-#~ "ainuke pääsetee uue installimise kõrval."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO ja grub-i peamised suvandid on:\n"
-#~ "  - Alglaadimisseade: määratakse kõvaketas või partitsioon, kus asub\n"
-#~ "alglaadimissektor. Kui Te just täpselt ei tea, mida teete,\n"
-#~ "\"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ooteaeg alglaadimisel: määratakse ooteaeg sekundikümnendikes enne\n"
-#~ "vaikimisi laadimist.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Graafikamood: määratakse VGA tekstmood süsteemi laadimisel. "
-#~ "Võimalikud\n"
-#~ "on järgmised valikud:\n"
-#~ "\n"
-#~ "    * normal: tavaline 80x25 tekstimood\n"
-#~ "\n"
-#~ "    * <number>:  numbrile vastav tekstimood.  - Puhasta /tmp "
-#~ "alglaadimisel: kui soovite kustutada süsteemi alglaadimisel,\n"
-#~ "valige see\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Täpsust RAM hulk kui vajalik: kahjuks ei ole ühtki standardset "
-#~ "meetodit Teie\n"
-#~ "arvutis leiduva operatiivmälu (RAM) koguse äraarvamiseks. Kui siinkohal "
-#~ "on eksimine\n"
-#~ "2 või 4 MB, siis ei maksa sellele väga tähelepanu pöörata."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO on alglaadur SPARC arhitektuurile: see võimaldab laadida\n"
-#~ "kas GNU/Linuxi või mõne muu Teie arvutis oleva operatsioonisüsteemi.\n"
-#~ "Tavaliselt tuvastakse teised operatsioonisüsteemid õigesti ja seadista-\n"
-#~ "takse ka alglaadur. Kui Teil aga ei ole õnne, tuleb parameetrid seada\n"
-#~ "käsitsi. Olge sel juhul hoolas valima õiged."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO peamised suvandid on:\n"
-#~ "  - Alglaaduri paigaldus: määratakse kõvaketas või partitsioon, kus "
-#~ "soovite\n"
-#~ "hoida GNU/Linuxi laadimiseks vajalikku infot. Kui Te just täpselt ei "
-#~ "tea,\n"
-#~ "mida teete, valige \"Kõvaketta esimene sektor (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ooteaeg alglaadimisel: määratakse aeg sekundikümnendikes enne "
-#~ "vaikimisi\n"
-#~ "laadimist."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "On aeg konfigureerida \"X Window System\" ehk lihtsalt X. X on\n"
-#~ "GNU/Linuxi graafilise kasutajaliidese süda. Sel eesmärgil peame koos\n"
-#~ "seadistama Teie graafikakaardi ja monitori. Enamus sellest protsessist\n"
-#~ "on automatiseeritud ja Teie ülesandeks on ainult DrakX-i\n"
-#~ "valikutega nõustuda (või mitte :))\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui saame seadistamisega hakkama, käivitakse X (kui Te ei anna\n"
-#~ "eraldi käsku mitte nii teha)."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Kui midagi on X-i seadistustega valesti, saab siinkohal võimalikke vigu\n"
-#~ "parandada."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Kui eelistate graafilist süsteemi sisenemist, valige \"Jah\". "
-#~ "Konsoolimoodi\n"
-#~ "eelistamisel valige \"Ei\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Nüüd saate valida oma süsteemis kasutatava turvataseme. Palun vaadake "
-#~ "lisainfot selle kohta ka\n"
-#~ " kasutajajuhendist. Üldiselt, kui Te ei tea, mida teete, jätke siia "
-#~ "vaikimisi valik.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Teie süsteem sooritab alglaadimise.\n"
-#~ "\n"
-#~ "Taaskäivitumisel laaditakse Teie uus Mandrake Linux süsteem "
-#~ "automaatselt.\n"
-#~ "Kui soovite laadida mõnd muud operatsioonisüsteemi, lugege palun\n"
-#~ "lisainformatsiooni."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Tðehhi (programmeerijad)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovaki (programmeerijad)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Loodava profiili nimi:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Kirjuta /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "Taasta failist"
-
-#~ msgid "Save in file"
-#~ msgstr "Salvesta faili"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Taasta flopilt"
-
-#~ msgid "Format all"
-#~ msgstr "Vorminda kõik"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Pärast kõigi partitsioonide vormindamist"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "on kõik andmed neil partitsioonidel hävivad"
-
-#~ msgid "Reload"
-#~ msgstr "Laadi uuesti"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Kas soovite luua kiirpaigaldusflopi (abiks korduval paigaldusel)?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL sätted"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Kui võrgus on CUPS server, siis ei ole Teil vaja siin\n"
-#~ "printereid seadistada, need leitakse automaatselt.\n"
-#~ "Kui server asub kuskil kaugemal, peate sisestama CUPS serveri\n"
-#~ "IP-aadress ning soovitavalt ka pordi numbri."
-
-#~ msgid "Remote queue"
-#~ msgstr "Prindijärjekorra nimi"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Prindijärjekorra nimi"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Domeeninimi"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Printerit ei ole"
-
-#, fuzzy
-#~ msgid "start it"
-#~ msgstr "piiratud"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "Võrgusätted"
-
-#~ msgid "Profile "
-#~ msgstr "Profiil "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Ühenduse tüüp: "
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "Loo internetiühendus"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Katkesta internetiühendus"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Katkesta internetiühendus"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Katkesta internetiühendus"
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "Ühenduse nimi"
-
-#, fuzzy
-#~ msgid "Color configuration"
-#~ msgstr "Seadistused"
-
-#, fuzzy
-#~ msgid "average"
-#~ msgstr "rämps"
-
-#, fuzzy
-#~ msgid "Connect"
-#~ msgstr "Ühendatud"
-
-#, fuzzy
-#~ msgid "Disconnect"
-#~ msgstr "Lahuta..."
-
-#~ msgid "/File/_New"
-#~ msgstr "/Fail/_Uus"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>N"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/Fail/_Ava"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>O"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/Fail/_Salvesta"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/Fail/Salvesta _Kui"
-
-#~ msgid "/File/-"
-#~ msgstr "/Fail/-"
-
-#~ msgid "/_Options"
-#~ msgstr "/_Eelistused"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/Eelistused/Test"
-
-#~ msgid "/_Help"
-#~ msgstr "/_Abi"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/Abi/_Misvärk"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Vaikimisi"
-
-#~ msgid "Europe"
-#~ msgstr "Euroopa"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "Eemalda prindijärjekord"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Sätete fail ei ole arusaadav."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Tundmatu sättefaili"
-
-#~ msgid "Adapter"
-#~ msgstr "Võrgukaart"
-
-#~ msgid "Disable network"
-#~ msgstr "Keela võrguühendus"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Keela võrguühendus"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Nüüd saate oma hiirt testida. Kasutage nii nuppe kui ratast. Kui tundub\n"
-#~ "midagi valesti olevat, klikkige <Katkesta> uue juhtprogrammi valimiseks."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (või ADSL) ühendus"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Hiir"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Võite anda ette ka URI, mille järgi CUPS printeri leiab."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Jah, trüki ASCII testlehekülg"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Jah, trüki PostSript testlehekülg"
-
-#~ msgid "Paper Size"
-#~ msgstr "Paberi suurus"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Töö lõpetamisel väljasta kogu leht?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Kas optimiseerime kõvaketast?"
-
-#~ msgid "Color depth options"
-#~ msgstr "Mooduli parameetrid:"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Trükkida tekst PostScriptina?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Paranda trepitud tekst?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Lehekülgi ühel paberil"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Lehe laiuse märgid punktides (1/72 tollile)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Lehe kõrguse märgid punktides (1/72 tollile)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Lisa GhostScript parameetrid"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Lisa teksti parameetrid"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Viimane leht enne"
-
-#~ msgid "CUPS starting"
-#~ msgstr "CUPS käivitatakse"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Vali võrguprinteri ühendusviis"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Masinal võib olla mitu printerit, millest igaüks vajab nime\n"
-#~ "(sageli lp) ja printkataloogi. Millist nime peaks kasutama\n"
-#~ "kasutama selle printeri puhul ja kuidas see on ühendatud?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Masinal võib olla mitu prindijärjekorda, millest igaüks vajab nime\n"
-#~ "(sageli lp) ja spuulkataloogi (ajutiste failide jaoks). Millist nime\n"
-#~ "ja kataloogi peaks kasutama selle printeri puhul ja kuidas see on "
-#~ "ühendatud?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Printeri nimi"
-
-#~ msgid "Spool directory"
-#~ msgstr "Spuulkataloog"
-
-#~ msgid "Disable"
-#~ msgstr "Keela"
-
-#~ msgid "Enable"
-#~ msgstr "Luba"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "LAN sätted"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Teenusepakkuja DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Teenuspakkuja DNS 2"
-
-#, fuzzy
-#~ msgid "fsck failed: "
-#~ msgstr "ühendamine ebaõnnestus: "
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Turvalisema süsteemi saamiseks peaksite valima \"Kasuta varjutatud \n"
-#~ "paroolifaili\" ja \"Kasuta parooli kaitsmiseks MD5 algoritmi\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Kui Teie võrgus on kasutusel NIS, valige \"Kasuta NIS-i\". Kahtluse "
-#~ "korral\n"
-#~ "küsige võrguhaldurilt."
-
-#~ msgid "yellow pages"
-#~ msgstr "NIS YP"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Kuidas soovite luua internetiühendust?"
-
-#~ msgid "Configure..."
-#~ msgstr "Seadista..."
-
-#, fuzzy
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "LAN sätted"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Valitud suurus %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Testime Teie ühendust..."
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Seadistused: Lisa asukoht"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "See skript proovib seadistada USB hiirt"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Alglaadimise stiil"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Nüüd on internetiühendus seadistatud aga Teie arvutit\n"
-#~ "saab panna ka seda jagama teistele arvutitele kohtvõrgus.\n"
-#~ "Märkus: kohtvõrgu jaoks on vajalik eraldi võrgukaardi olemasolu\n"
-#~ "\n"
-#~ "Kas soovite internetiühendust jagada?\n"
-
-#~ msgid "Welcome to the Internet Connection Sharing utility!"
-#~ msgstr "Internetiühenduse jagamine"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Automaatsed sõltuvused"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "LILO/GRUB seadistamine"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Loo alglaadimisflopi"
-
-#~ msgid "Format floppy"
-#~ msgstr "Vorminda flopi"
-
-#~ msgid "Choice"
-#~ msgstr "Valik"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "horisontaalne kena aurora"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "vertikaalne tavaline aurora"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Nüüd saate valida mitmesuguseid süsteemi käitumise võimalusi.\n"
-#~ "\n"
-#~ "* Optimiseeri kõvaketast: selle variandi puhul saate kiirendada\n"
-#~ "  kõvaketta poole pöördumist, kuid teatud vigaste emaplaatide puhul \n"
-#~ "  võite kõvaketta rikkuda. Valige, kui olete endas kindel.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Valige turvatase: saate valida oma süsteemi turvalisuse taseme.\n"
-#~ "  Palun vaadake manuaali, et saada turvatasemetest täielik ülevaade.\n"
-#~ "  Kui kahtlete, valige \"Keskmine\", et saada tõesti turvalist süsteemi,\n"
-#~ "  valige \"Paranoiline\" aga olge ettevaatlik, näiteks EI SAA SELLEL "
-#~ "TASEMEL\n"
-#~ "  JUURKASUTAJA SISSE LOGIDA! Peate kasutama käsku 'su'. Mida "
-#~ "turvalisem, \n"
-#~ "  seda keerulisem kasutada!\n"
-#~ "\n"
-#~ "* Täpsusta operatiivmälu mahtu: võib esineda olukord, kus GNU/Linux ei\n"
-#~ "  ole suuteline detekteerima täpselt operatiivmälu suurust. Kui see on\n"
-#~ "  nii juhtunud, saate öelda ette tegeliku mäluhulga. Paneme tähele, et\n"
-#~ "  erinevus 2-4MB tuvastatud ja tegeliku mälu hulga vahel on normaalne.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Irdandmekandjate automaatne ühendamine (supermount): Teie flopid, CD-d\n"
-#~ "  ja Zip-kettad ühendatakse automaatselt (ilma mount/umount kasutamata)\n"
-#~ "\n"
-#~ "\n"
-#~ "* Puhasta \"/tmp\" alglaadimisel: süsteemi laadimisel kustutatakse kõik   "
-#~ "failid \"/tmp\" kataloogist.\n"
-#~ "\n"
-#~ "* Võimalda NumLock alglaadimisel: süsteemi laadimisel muudetakse\n"
-#~ "  konsoolimoodis NumLock aktiivseks"
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr "Vabandan, aga meili seadistamine ei ole praegu veel võimalik."
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "See siin on võrguühenduse abimees.\n"
-#~ "Mis komponente soovite seadistada?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Internetiühendus"
-
-#~ msgid "Firewall Configuration Wizard"
-#~ msgstr "Võrgu sätete abimees"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Muud sätted"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Muud küsimused"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Kõrgel turvatasemel ei saa supermount-i kasutada"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "SELLEL TURVATASEMEL EI OLE VÕIMALIK SÜSTEEMI SISENEDA JUURKASUTAJANA!\n"
-#~ "Juurkasutaja õiguste saamiseks tuleb siseneda tavakasutajana ja siis \n"
-#~ "kasutada \"su\"-d.\n"
-#~ "Serveri puhul on selline piirang täiesti mõistlik.\n"
-#~ "Teid on igal juhul hoiatatud."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Olge ettevaatlik, NumLock-i kasutamine võib põhjustada (eriti kantavatel\n"
-#~ "arvutitel) probleeme."
-
-#~ msgid "not connected"
-#~ msgstr "ei ole ühendatud"
-
-#~ msgid "Actions"
-#~ msgstr "Tegevused"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Teadusrakendused"
-
-#~ msgid "toot"
-#~ msgstr "tuut"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Server, Faili/prindi/samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Server, DNS/DHCP"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Esimene nimeserver:"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Teine nimeserver:"
-
-#~ msgid "using module"
-#~ msgstr "kasutades moodulit"
-
-#~ msgid "Development, Database"
-#~ msgstr "Arendus, Andmebaasid"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Arendus, Graafilised keskkonnad"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Arendus, standardvahendid"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "Hoiatus:\n"
-#~ "Muudatuste rakendamine võib X keskkonna endast välja viia."
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "Jätkamisel olen sunnitud Teie %s keskkonna seiskama"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Millist alglaadurit soovite kasutada?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Kiirpaigaldusflopi"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Kas otsida modemit?"
-
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "Seadista ISDN ühendus"
-
-#~ msgid "Configure a cable connection"
-#~ msgstr "Seadista TV-kaabli ühendus"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Keela ühendus Internetti"
-
-#~ msgid "Configure local network"
-#~ msgstr "Kohtvõrgu seadistamine"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Seadista internetiühendus / Seadista kohtvõrk"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Kohtvõrk on juba seadistatud.\n"
-#~ "Kas soovite:"
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Seadistan uuesti abimehega..."
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Graafikaprogrammid"
-
-#~ msgid "Multimedia"
-#~ msgstr "Multimeedia"
-
-#~ msgid "Sciences"
-#~ msgstr "Teadused"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Jututamise (IRC või IM) programmid xchat, licq, gaim ja failiülekande "
-#~ "vahendid"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Suhtlemisvahendid"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Interneti värgid"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Andmebaasiserveri ja -kliendid (mysql ja postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "C/C++ arendus"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Ajavöötme määramine"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Esimene võrguliides (eth0)"
-
-#~ msgid "isdn_internal"
-#~ msgstr "isdn_internal"
-
-#~ msgid "ippp0"
-#~ msgstr "ippp0"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(võib tekitada andmete hävimist)"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "Kas optimiseerime kõvaketast?"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Lülita Num Lock käivitamisel sisse"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Salasõna uuesti"
-
-#~ msgid "default"
-#~ msgstr "tavaline"
-
-#~ msgid "Type :"
-#~ msgstr "Tüüp: "
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Milline on Teie süsteemi kasutusala?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Valige paigalduse maht"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Kasuta diskdrake-i"
-
-#~ msgid "Customized"
-#~ msgstr "Isetehtud"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Olete ikka kindlasti ekspert? \n"
-#~ "Hei, ilma naljata, eksperdi valikud on laiemad kuid sellevõrra "
-#~ "ohtlikumad.\n"
-#~ "\n"
-#~ "Teilt küsitakse küsimusi näiteks 'paroolifaili varjutamise' jms kohta,\n"
-#~ "olete Te selleks valmis?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Kasuta varjutatud paroolifaili"
-
-#~ msgid "shadow"
-#~ msgstr "varjutatud"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Kasuta parooli kaitsmiseks MD5 algoritmi"
-
-#~ msgid "Search"
-#~ msgstr "Otsi"
-
-#~ msgid "Package"
-#~ msgstr "Pakett"
-
-#~ msgid "Text"
-#~ msgstr "Tekst"
-
-#~ msgid "Tree"
-#~ msgstr "Puu"
-
-#~ msgid "Sort by"
-#~ msgstr "Sortimine"
-
-#~ msgid "Category"
-#~ msgstr "Kategoori"
-
-#~ msgid "See"
-#~ msgstr "Vaata"
-
-#~ msgid "Installed packages"
-#~ msgstr "Installitud paketid"
-
-#~ msgid "Available packages"
-#~ msgstr "Kättesaadavad paketid"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Näita ainult üksikuid"
-
-#~ msgid "Expand all"
-#~ msgstr "Ava kõik"
-
-#~ msgid "Collapse all"
-#~ msgstr "Sule kõik"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Lisa pakettide asukoht"
-
-#~ msgid "Update location"
-#~ msgstr "Uuenda asukoht"
-
-#~ msgid "Find Package"
-#~ msgstr "Leia pakett"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Leia pakett faili järgi"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Installitud/Saadaval"
-
-#~ msgid "Choose package to install"
-#~ msgstr "Valige pakett installimiseks"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Kontrollin sõltuvusi"
-
-#~ msgid "Wait"
-#~ msgstr "Oodake"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Eemaldatakse järgmised paketid"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "RPM-ide eemaldamine"
-
-#~ msgid "Regexp"
-#~ msgstr "Regulaaravaldis"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Milline pakett vajab ressurssi"
-
-#~ msgid "%s not found"
-#~ msgstr "%s ei leitud"
-
-#~ msgid "No match"
-#~ msgstr "Ei leitud sobivat"
-
-#~ msgid "No more match"
-#~ msgstr "Ei leitud enam sobivaid"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake on hetkel \"säästuresiimil\".\n"
-#~ "Failide otsimiseks käivitan rpmdrake uuesti"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Millist faili Te otsite?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Mida Te otsite?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Andke nimi (nagu: 'extra, 'commercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Kataloog"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "CD-d ei leitud (vähemalt mitte /mnt/cdrom all)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL kataloogile, kus paiknevad RPM-id"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "FTP ja HTTP jaoks on vaja ka hdlist-i asukohta\n"
-#~ "See peab olema antud eelmise URLi suhtes"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Palun järgmist informatsiooni"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s on juba kasutusel"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Uuendan RPM andmebaasi"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Eemaldan kirje %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Leian ülejäägid"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Ülejääkide leidmine võtab veidi aega"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Leitud ISDN kaart:\n"
-
-#~ msgid "France"
-#~ msgstr "Prantsusmaa"
-
-#~ msgid "Other countries"
-#~ msgstr "Muud maad"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "Millisel maal Te praegu olete ?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Alcatel modem"
-
-#~ msgid "ECI modem"
-#~ msgstr "ECI modem"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr "Kui teil on Alcatel-i modem, valige Alcatel. Muidu aga ECI"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "ära kasuta pppoe-d"
-
-#~ msgid "mandatory"
-#~ msgstr "kohustuslik"
-
-#~ msgid "interesting"
-#~ msgstr "huvitav"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (tähtis)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (väga kena)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (kena)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Millisesse seerialporti on Teie hiir ühendatud?"
-
-#~ msgid "Czech"
-#~ msgstr "T¨ehhi"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovaki"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "Ei saa installida 'ipchains' paketti urpmi abil."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "Ei saa installida DHCP paketti urpmi abil."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "Ei saa installida linuxconf-i urpmi abil."
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "Ei saa installida 'bind' paketti urpmi abil."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "Ei saa installida nimeserveri vahendajat urpmi abil."
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Seadista kohtvõrk uuesti"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Teie arvutit saab seadistada internetiühenduse jagajana.\n"
-#~ "\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "Kõik sai seadistatud.\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Kasuta Interneti jaoks tavamodemit"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Kasuta Interneti jaoks ISDN modemit"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Kasuta Interneti jaoks DSL (või ADSL) modemit"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Kasuta Interneti jaoks DOC kaablimodemit"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "Mittekasutamise aeg, mille jooksul ühendus\n"
-#~ "katkestatakse. (vaikimisi ei katkestata)"
-
-#~ msgid "Germany"
-#~ msgstr "Saksa"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Saksa (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Mida Te soovite teha?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Installi/Taasta"
-
-#~ msgid "Rescue"
-#~ msgstr "Taasta"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Mis tüüpi partitsiooni soovite?"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Valige \"Installimine\" kui varem sellele masinale GNU/Linuxit ei ole "
-#~ "pandud\n"
-#~ "või soovite kasutada mitut distributsiooni\n"
-#~ "\n"
-#~ "Valige \"Taastamine\" kui soovite taastada mõnd eelmist Mandrake "
-#~ "Linuxit:\n"
-#~ "%s või %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Valige:\n"
-#~ "\n"
-#~ "  - Soovitatav: Te pole kunagi varem GNU/Linuxit installinud. \n"
-#~ "\n"
-#~ "  - Isetehtud: Olete Linuxiga tuttav ja soovite süsteemi kohandada "
-#~ "vastavalt\n"
-#~ "    Teie vajadustele. Järgmisena saate teha valikud sõltuvalt Teie "
-#~ "arvuti\n"
-#~ "    edaspidisest kasutusalast.\n"
-#~ "\n"
-#~ "  - Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
-#~ "    süsteemi, mis sobiks nagu valatult Teie täpsete ootustega.\n"
-#~ "    Aga palun, palun: ÄRGE VALIGE SEDA, KUI TE TÄPSELT EI TEA, MIDA "
-#~ "TEETE!\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "SEAL\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "Nüüd peaksite valima partitsioon(id) Mandrake Linux installimiseks\n"
-#~ "kui need on juba varem kettale defineeritud. Kui Te varem ei ole oma\n"
-#~ "kõvaketast Linuxi jaoks partitsioneerinud, saate seda järgmises etapis\n"
-#~ "teha. Partitsioneerimine tähendab füüsilise ketta jaotamist loogiliselt\n"
-#~ "eraldatud osadeks.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui ei tunne ennast sel alal kindlalt, valige \"Paiguta ise\", et\n"
-#~ "automaatselt luua Linuxile vajalikud partitsioonid.\n"
-#~ "Linuxi maailmas tähendab \"hda\" esimest, \"hdb\" teist IDE kõvaketast,\n"
-#~ "\"sda\" esimest. \"sdb\" teist SCSI kõvaketast jne. Partitsioneerimiseks\n"
-#~ "valige kettaseade lihtsalt sellel klikkides.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kaks tavalist partitsiooni on juurpartitsioon (/), kus asub "
-#~ "failisüsteemi\n"
-#~ "hierarhia algus ja /boot, mis sisaldab arvuti alglaadimiseks vajalikke "
-#~ "faile, sealhulgas Linuxi kernelit.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kuna partitsioneerimine ei ole pööratav protsess, võib see tekitada\n"
-#~ "algajas kerget kõhedust. DiskDrake on selle teinud küll lihtsamaks,\n"
-#~ "aga kindlasti tuleks enne iga liigutust sügavalt järele mõtelda ja\n"
-#~ "soovitavalt ka dokumentatsiooniga tutvuda.\n"
-#~ "\n"
-#~ "Kõiki tegevusi saate teha ka ainult klaviatuuri kasutades: liikuge\n"
-#~ "partitsioonidel <TAB> ja üles-alla noolte abil. Partitsiooni valikul\n"
-#~ "\n"
-#~ "- Ctrl-C  loob uue partitsiooni (valige selleks vaba kettaala)\n"
-#~ "- Ctrl-D  kustutab partitsiooni\n"
-#~ "\n"
-#~ "- Ctrl-M  seab ühenduspunkti\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Kõik Teie poolt värskelt loodud partitsioonid tuleb kasutamiseks "
-#~ "vormindada\n"
-#~ "(luua failisüsteemid). Partitsiooni vormindamisel hävitatakse kõik "
-#~ "andmed,\n"
-#~ "mis seal iganes leiduvad. Pange tähele, et varem vormindatud ja "
-#~ "vajalikke\n"
-#~ "andmeid sisaldavaid partitsioone, tüüpiliselt /home ja /usr/local, ei "
-#~ "ole\n"
-#~ "mõistlik üle vormindada, vaid need võib jätta nii nagu on."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Nüüd hakkan Teie valitud pakette installima. Selleks peaks kuluma\n"
-#~ "mõnikümmend minutit. Süsteemi uuendamisel kulub aega küll veidi rohkem,\n"
-#~ "sest siis tuleb enne olemasolevaid pakette analüüsida."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Kui DrakX ei suutnud Teie hiirt tuvastada, või soovite vaadata, mida\n"
-#~ "leiti, kuvatakse Teile ülalpool \"hiiretõugude\" nimekiri.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui olete valikuga nõus, minge lihtsalt vasakpoolses menüüs edasi.\n"
-#~ "Vastasel juhul valige hiire tüüp, mis Teie arvates kõige paremini Teie\n"
-#~ "hiirt iseloomustab\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui tegemist on seerialpordi hiirega, peate ütlema ka, mis porti ta on\n"
-#~ "ühendatud."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "See sektsioon on pühendatud kohtvõrgu (LAN) või sissehelistamisteenuse\n"
-#~ "(DialUp) sätete paikapanemisele.\n"
-#~ "\n"
-#~ "Kui vastate \"LAN\", siis proovitakse Teie arvutist leida võrgukaarti.\n"
-#~ "Kui Teie võrgukaart töötab PCI siinil, peaks ta olema leitav ja "
-#~ "kasutatav\n"
-#~ "automaatselt. ISA kaardi puhul, võib automaatne otsing alt vedada ja Te\n"
-#~ "peate juhtprogrammi ise nimekirjast valima.\n"
-#~ "\n"
-#~ "\n"
-#~ "SCSI kaartide puhul peab juhtprogramm esmalt leidma SCSI liidese, "
-#~ "vastasel\n"
-#~ "juhul peate pöörduma kaardi müüja poole.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui installite Mandrake Linux süsteemi masinale, mis on osake juba "
-#~ "töötavast\n"
-#~ "kohtvõrgust, annab võrgu haldaja Teile kogu vajaliku informatsiooni (IP-\n"
-#~ "aadressi, alamvõrgu maski ja masina nime). Kui seate üles oma privaatset\n"
-#~ "võrku, peaksite ise valima aadressid \n"
-#~ "\n"
-#~ "Kui soovite Internetti kasutada modemi ja sissehelistamisteenuse kaudu,\n"
-#~ "valige \"DialUp\" ja DrakX proovib otsida Teie arvutist modemit. Kui\n"
-#~ "modemit ei leita, peate sisestama seerialpordi, kuhu kavatsete modemi\n"
-#~ "ühendada."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "Linuxi all saate kasutada mitmesuguseid printereid. Igaüks neist nõuab\n"
-#~ "erinevaid sätteid töötamiseks. Siiski tasub tähele panna, et süsteem\n"
-#~ "kasutab nime 'lp' vaikimisi printeri jaoks; seega peab Teil üks \n"
-#~ "selliselt tähistatud, kuigi printeri(te)le võib panna '|' märgiga "
-#~ "eraldatult\n"
-#~ "mitu nime. Kui eelistate \"tähendusega\" nimesid, pange nimeks\n"
-#~ "näiteks \"Minu printer|lp\" ja see saab olema Teie vaikimisi printer.\n"
-#~ "\n"
-#~ "Kui Teie printer on otse arvuti külge ühendatud, valige \"Kohalik printer"
-#~ "\".\n"
-#~ "Siis saate valida pordi kuhu see on ühendatud ja printerile vastava "
-#~ "filtri.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite kasutada printerit, mis on ühendatud Un*x serveriga, peate\n"
-#~ "Valima \"lpd võrguprinter\". Niisugusel juhul ei vaja Te kasutajatunnust\n"
-#~ "ega salasõna, vaid ainult serveri nime ja printimisjärje nime serveril.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite kasutada SMB printserverit (st. printerit, mida jagab välja\n"
-#~ "Windows 9x/NT, peate ära näitama serveri SMB nime (mis ei pea olema sama\n"
-#~ "TCP/IP nimega) ja kindluse mõttes ka IP-aadressi. Loomulikult on vaja "
-#~ "teada\n"
-#~ "ka serveri poolt jagatava printeri nime ning kasutajatunnust, salasõna "
-#~ "ja\n"
-#~ "töögrupi nime. Sama, välja arvatud töögrupp, on vaja teada ka NetWare\n"
-#~ "printserveri kasutamise korral."
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "On äärmiselt soovitatav vastata siin \"Jah\"! Näiteks, kui installite\n"
-#~ "samasse masinasse hiljem MS Windowsi, kirjutab see üle bootsektori.\n"
-#~ "Ilma alglaadimisflopita ei ole Teil siis enam võimalik GNU/Linuxit\n"
-#~ "laadida."
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Liigutage ratast!"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Muutusi ei teinudki?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Mis tüüpi hiirt kasutate?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Väljapakutavad kuvatihedused"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Et leida võimalikke kuvatihedusi, testin erinevaid variante.\n"
-#~ "Ekraan Teie ees hakkab vilkuma...\n"
-#~ "Kui soovite, lülitage monitor välja. Kui valmis saan, kostab piiks"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Me võime proovida leida kuvatihedust, näiteks 800x600.\n"
-#~ "Siiski, vahel ajab see arvuti segadusse.\n"
-#~ "Soovite proovida?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Sobivat olekut ei leitud\n"
-#~ "Proovige palun muud graafikakaarti või monitori"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Automaatne kuvatiheduste otsing"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-client"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB hiir"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB hiir (2 nuppu)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB hiir (3+ nuppu)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB hiir"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB hiir (2 nuppu)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB hiir (3+ nuppu)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Bus hiir"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft Bus hiir"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech Bus hiir"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB hiir (3 või enam nuppu)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A või kõrgem (seerial)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (seerial)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (seerial)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (seerial)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Lihtsalt hiir (seerial)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsofti ühilduv (seerial)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Lihtsalt 3-nupuline hiir (seerial)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (seerial)"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr "Internetiühenduse jaoks on vaja seadistada võrguliides."
-
-#~ msgid ""
-#~ "Please choose which network adapter do you want to use to connect to "
-#~ "internet.\n"
-#~ "If you don't know, choose eth0.\n"
-#~ msgstr ""
-#~ "Palun valige millist võrguliidest soovite kasutada kohtvõrgu\n"
-#~ "jaoks.\n"
-#~ "Kui Te ei tea, valige eth0.\n"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "NFS ühendamine ebaõnnestus"
-
-#~ msgid "Socket"
-#~ msgstr "Pistik"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX saab luua sättefailid nii XFree 3.3 kui ka XFree 4.0. \n"
-#~ "Vaikimisi kasutatakse 4.0, kui see toetab Teie riistvara\n"
-#~ "\n"
-#~ "Kas soovite jääda XFree versiooni 3.3 juurde?"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Krüpto"
-
-#~ msgid "Configure LAN"
-#~ msgstr "Seadista X"
-
-#~ msgid "End configuration"
-#~ msgstr "ISDN sätted"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "Ei seadista võrku"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Kas soovite kasutada kohtvõrku?"
-
-#~ msgid "Show less"
-#~ msgstr "Näita vähem"
-
-#~ msgid "Show more"
-#~ msgstr "Näita rohkem"
-
-#~ msgid "Take over the hard drive"
-#~ msgstr "Kasuta kogu ketast"
-
-#~ msgid "URI for Local printer"
-#~ msgstr "Kohalik printer"
-
-#~ msgid "URI for Network printer"
-#~ msgstr "Võrguliides"
-
-#~ msgid "Local Printer Device (URI)"
-#~ msgstr "Otse ühendatud printer"
-
-#~ msgid ""
-#~ "What URI device is your printer connected to\n"
-#~ "(nte that parallel:/dev/lp0 is equivalent to LPT1:)?"
-#~ msgstr ""
-#~ "Mis porti on Teie printer ühendatud? \n"
-#~ "(paneme tähele, et /dev/lp0 on sama mis LPT1:)?"
-
-#~ msgid "tie"
-#~ msgstr "pintsaklips"
-
-#~ msgid "brunette"
-#~ msgstr "brünett"
-
-#~ msgid "girl"
-#~ msgstr "neiu"
-
-#~ msgid "woman-blond"
-#~ msgstr "blondiin"
-
-#~ msgid "automagic"
-#~ msgstr "automaagiline"
-
-#~ msgid "Have you been provided with a hostname?"
-#~ msgstr "Anti Teile masinanimi"
-
-#~ msgid "Local Area Network specification"
-#~ msgstr "Kohtvõrgu seaded"
-
-#~ msgid "You may now decide which class C network to use.\n"
-#~ msgstr "Millist C-klassi võrku soovite kasutada.\n"
-
-#~ msgid "Network:"
-#~ msgstr "Võrgu mask:"
-
-#~ msgid "Internet Connection Sharing - setup of %s"
-#~ msgstr "Internetiühenduse jagamine - liides %s"
-
-#~ msgid ""
-#~ "The following interface is about to be configured:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Seatakse sätted järgmisele võrguliidesele:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-
-#
-#~ msgid "Everything configured!"
-#~ msgstr "Kõik seadistatud!"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Milline on Teie klaviatuuriasetus"
-
-#~ msgid ""
-#~ "\n"
-#~ "I recommend that you abort, and then launch this internet wizard after "
-#~ "installation.It will then be able to setup ISA or PCMCIA cards easier.\n"
-#~ "\n"
-#~ "But, if you know the irq, dma, io of your card, you can still configure "
-#~ "your card."
-#~ msgstr ""
-#~ "\n"
-#~ "Soovitan teil praegu katkestada ja käivitada võrguühenduse abimees pärast "
-#~ "installimist uuesti. Siis on võimalik Teie ISA või PCMCIA kaarte lihtsam\n"
-#~ "seadistada\n"
-#~ "Muidugi, kui teil on teada oma kaardi IRQ, DMA ja IO, ei ole probleemi."
-
-#~ msgid "pptp alcatel"
-#~ msgstr "Paiguta ise"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Kas otsida PCMCIA kaarte?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Kas otsida %s seadmeid?"
-
-#~ msgid "Small(%dMB)"
-#~ msgstr "Väike (%d MB)"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "Kas soovite kasutada DialUp ühendust modemi kaudu?"
-
-#~ msgid "Do you want to configure a ISDN connection for your system?"
-#~ msgstr "Kas soovite kasutada ISDN ühendust?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Kas otsida PCI seadmeid?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "Otsin juurpartitsiooni.."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: See ei ole juurpartitsioon, palun valige mõni muu."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "Millist partitsiooni soovite kasutada juurkataloogi jaoks?"
-
-#~ msgid "Autologin at startup"
-#~ msgstr "X stardib nüüd"
-
-#~ msgid "Autologin - Choose default user"
-#~ msgstr "Valige uus suurus"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "Teil ei ole ühtki Windowsi partitsiooni!"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Teil ei ole piisavalt ruumi Lnx4win jaoks"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Tere tulemast! Laadimisel aitab Teid LILO!\n"
-#~ "\n"
-#~ "Valikud kuvab <Tab>.\n"
-#~ "\n"
-#~ "Valimiseks sisestage eelistatava nimi ja vajutage <Enter>\n"
-#~ "vaikimisi oodake %d sekundit.\n"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Tere tulemast! Laadimisel aitab Teid SILO!\n"
-#~ "\n"
-#~ "Valikud kuvab <Tab>.\n"
-#~ "\n"
-#~ "Valimiseks sisestage eelistatava nimi ja vajutage <Enter>\n"
-#~ "vaikimisi oodake %d sekundit.\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "SILO peasätted"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Praegu on SILO jaoks kirjeldatud alltoodud kirjed.\n"
-#~ "Te võite neid lisada ning olemasolevaid muuta."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Selline tähis on juba kasutusel"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "SILO installimine ebaõnnestus. Tekkis järgnev viga:"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX proovib esmalt leida Teie süsteemist SCSI liideseid PCI siinil.\n"
-#~ "Kui neid leitakse, ja vastav juhtprogramm on teada, siis laetakse\n"
-#~ "see mällu automaatselt.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Teie SCSI liides kasutab ISA siini või kui DrakX ei tea,\n"
-#~ "millist juhtprogrammi kasutada või Teil ei ole üldse SCSI liidest,\n"
-#~ "siis küsitakse Teilt selle kohta.\n"
-#~ "Kui Teil SCSI liidest tõesti ei ole, vastake \"Ei\". Kui Teil aga siiski\n"
-#~ "on, siis vastake \"Jah\". Seejärel lastakse Teil nimekirjast sobiv\n"
-#~ "juhtprogramm valida.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui olete juhtprogrammi välja valinud, on Teil võimalus anda sellele\n"
-#~ "ka parameetreid. Siiski, enamasti läheb kõik kenasti ka ilma neid\n"
-#~ "sisestamata: vastavad andmed leiab juhtprogramm ise.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui automaatne parameetrite otsimine ei tööta, pöörduge palun\n"
-#~ "oma SCSI liidese dokumentatsiooni poole. Ka samas masinas olev Windows\n"
-#~ "oskab vahel SCSI kohta vajalikku informatsiooni anda."
-
-#~ msgid "Shutting down"
-#~ msgstr "Sulgemine"
-
-#~ msgid "useless"
-#~ msgstr "kasutu"
-
-#~ msgid ""
-#~ "Some true type fonts from windows have been found on your computer.\n"
-#~ "Do you want to use them? Be sure you have the right to use them under "
-#~ "Linux."
-#~ msgstr ""
-#~ "Teie arvutist mõned hulk Windowsi TrueType fondid.\n"
-#~ "Soovite Te neid ka Linuxis kasutada (eeldusel, et Teil on need legaalsed)?"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Valige \"Installimine\" kui varem sellele masinale Linuxit ei ole pandud\n"
-#~ "või soovite kasutada mitut distributsiooni\n"
-#~ "\n"
-#~ "\n"
-#~ "Valige \"Uuendamine\" kui soovite uuendada mõnd eelmist Mandrake "
-#~ "Linuxit:\n"
-#~ "5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios),\n"
-#~ "Gold 2000 või 7.0 (Air)."
-
-#~ msgid "Creating and formatting loopback file %s"
-#~ msgstr "Loon ja vormindan loopback faili %s"
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "Soovite LILO-t kasutada?"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "Nüüd võite valida paketigrupi, mida soovite installida või uuendada.\n"
-#~ "Soovi korral saate valida pakette ka lisaks vastavalt oma äranägemisele\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui olete valinud paigaldusviisi \"Ekspert\", saate pakette ükshaaval\n"
-#~ "Tähelepanu! Mõned paketid võivad nõuda, et oleks installitud ka mõned\n"
-#~ "teised. Neid nimetatakse paketi sõltuvusteks. Paketi valimisel valitakse\n"
-#~ "automaatselt ka kõik tema sõltuvused. Paketi installimine ilma kõiki\n"
-#~ "sõltuvusi rahuldamata, on võimatu."
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (LInux LOader) oskab laadida erinevaid Teie arvuti leiduvaid\n"
-#~ "operatsioonisüsteeme. Tavaliselt tuvastatakse need installimise käigus.\n"
-#~ "Kui Te ei näe neid tuvastatuna, saate need nüüd lisada.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Te ei soovi mõnd neist laadida, võite selle kohe eemaldada. Sellisel\n"
-#~ "juhul vajate selle laadimiseks vastavat alglaadimisflopit."
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "Pakettide valik"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Valige:\n"
-#~ "\n"
-#~ "  - Soovitatav: Te pole kunagi varem Linuxit installinud.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Oma segu: Olete Linuxiga tuttav ja soovite süsteemi kohandada "
-#~ "vastavalt\n"
-#~ "Teie vajadustele. Järgmisena saate teha valikud \"Tööjaam\", \"Arendus\"\n"
-#~ "ja \"Server\", sõltuvalt Teie arvuti edaspidisest kasutusalast.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
-#~ "süsteemi, mis sobiks nagu valatult Teie täpsete ootustege."
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "Laadime krüptopakette"
-
-#~ msgid "Setup SCSI"
-#~ msgstr "SCSI seadistamine"
-
-#~ msgid "Which packages do you want to install"
-#~ msgstr "Valige paketid mida soovite installida"
-
-#~ msgid "Local LAN"
-#~ msgstr "LAN"
-
-#~ msgid "expert"
-#~ msgstr "ekspert"
-
-#~ msgid "developer"
-#~ msgstr "arendaja"
-
-#~ msgid "beginner"
-#~ msgstr "algaja"
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "lineaarne (vajalik mõnedel SCSI ketastel)"
-
-#~ msgid "linear"
-#~ msgstr "linearne"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Pärast %s partitsioneeri %s,"
-
-#~ msgid "changing type of"
-#~ msgstr "tüübi muutmine"
-
-#~ msgid "formatting"
-#~ msgstr "vormindatakse"
-
-#~ msgid "resizing"
-#~ msgstr "suuruse muutumine"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Suurus: %s MB"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "Loetamatu kickstart fail %s (%s viga)"
-
-#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
-#~ msgstr "Valitud on liiga palju pakette: %dMB ei mahu %dMB-le"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr "Paigalduseks valitud %d MB. Võite veel programme juurde valida"
-
-#~ msgid "Enter a floppy (all data will be lost)"
-#~ msgstr "Pange tühi flopi masinasse (andmed sellel hävivad)"
-
-#~ msgid "Password:"
-#~ msgstr "Salasõna:"
-
-#~ msgid "User name:"
-#~ msgstr "Kasutajatunnus:"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "HTP alglaadimisketta loomine ebaõnnestus.\n"
-#~ "Taasalustage installimist, andes parameetriks ``%s''"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "Peate taasalustama installimist uute parameetritega"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "Peate taasalustama installimist, laadides flopikettalt"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "Sisesta flopi HTP alglaadimisketta loomiseks\n"
-#~ "(kõik andmed flopil hävivad)"
-
-#~ msgid "A entry %s already exists"
-#~ msgstr "Kirje %s on juba olemas"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "Paigaldus või uuendamine"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "Mis kasutusala soovite?"
diff --git a/perl-install/share/po/eu.po b/perl-install/share/po/eu.po
deleted file mode 100644
index de12b3f2f..000000000
--- a/perl-install/share/po/eu.po
+++ /dev/null
@@ -1,11325 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-# Joseba Bidaurrazaga van Dierdonck <jbv@euskalnet.net>, 1999-2001.
-# Iñigo Salvador Azurmendi <xalba@euskalnet.net>, 2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 1999-12-20 11:28+0100\n"
-"Last-Translator: Joseba Bidaurrazaga van Dierdonck <jbv@ej-gv.es>\n"
-"Language-Team: Euskara <linux-eu@chanae.alphanet.ch>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Konfiguratu buru guztiak banan-banan"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Erabili Xinerama estentsioa"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfiguratu bakarrik \"%s\" (%s) txartela"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Buru-anitz konfigurazioa"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Zure sistemak buru anitzezko konfigurazioaz balia daiteke.\n"
-"Zer egin nahi duzu?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Grafikoen txartela"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Hautatu grafikoen txartela"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Hautatu X zerbitzaria"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X zerbitzaria"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "XFree-ren zein konfigurazio izan nahi duzu?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Zure txartelak 3D azelerazioa izan lezake, baina soilik XFree %s-z.\n"
-"XFree %s-ek zure txartela onar lezake, honek dena den, 2D-tan hobeto lan "
-"egin lezake."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Zure txartelak harware bidezko 3D azelerazioa onar lezake XFree %s-z"
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s hardwarearen 3D azelerazioaz"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Zure txartelak 3D azelerazioa izan lezake XFree %s-z.\n"
-"KASU: EXPERIMENTAZIOAN DAGOEN ONARPENA DA ETA KONPUTAGAILUA IZOZTU LEZAKE."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s harware bidezko 3D azelerazioaz; EXPERIMENTALA"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Zure txartelak harware bidezko 3D azelerazioa onar lezake baina soilik XFree "
-"%s-z.KASU: EXPERIMENTAZIOAN DAGOEN ONARPENA DA ETA KONPUTAGAILUA IZOZTU "
-"LEZAKE.\n"
-"XFree %s-ek zure txartela onar lezake, honek dena den, 2D-tan hobeto lan "
-"egin lezake."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (pantailaren instalazio gidaria)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree-ren konfigurazioa"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Hatatu zure grafikoen txartelerako memoriaren tamaina"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Hautatu zerbitzariarentzako aukerak"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Hautatu monitorea"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitorea"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Parametro kritiko dira freskatze maiztasun bertikala, pantailaren "
-"freskatzemaiztasuna\n"
-"ematen duena, eta garrantzitzuagoa daitekeen horizontal sync maiztasuna,\n"
-"eskaneatutako lerroak erakusteko maiztasuna.\n"
-"\n"
-"Monitorearen ahalmenaren gainetik dagoen sync maiztasuna gainditzen duen "
-"espezifikaziorikez ematea\n"
-"OSO GARRANTZITSUA da: monitorea kaltetudezakezu.\n"
-" Dudatan bazaude izan kontserbakorra."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Freskatze horizontalaren maiztasuna"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Freskatze bertikalaren maiztasuna"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Monitorea konfiguratu gabe"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Grafikoen txartela konfiguratu gabe oraindik"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Oraindik erresoluzioak hautatu gabe"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Konfigurazioa frogatu nahi duzu?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Kasu: txartel grafiko honen saiakerak konputagailua izoztu lezake"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Frogatu konfigurazioa"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"saia zaitez beste parametruez"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Errorea gertatu da:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d segundu barru irtengo naiz"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Zuzenak dira hautuak?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Errorea gertatu da, saia zaitez zenbait parametro aldatuz"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Erresoluzioa"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Hautatu erresoluzioa eta kolore sakontasuna"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafikoen txartela: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 zerbitzaria: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Aditu Modua"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Erakutsi dena"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Erresoluzioak"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Teklatuaren itxura: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Sagu mota: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Saguaren tresna (device): %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitorea: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitorearen HorizSync: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitorearen VertRefresh: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafikoen txartela: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafikoen txartela: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memoria grafikoa: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kolore sakontasuna: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Erresoluzioa: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 zerbitzaria: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 gidaria: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "X-Windows-en konfigurazioa prestatzen"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Zer egin nahi duzu?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Aldatu monitorea"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Aldatu grafikoen txartela"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Aldatu zerbitzariaren aukerak"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Aldatu erresoluzioa"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Erakutsi informazioa"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Saia zaitez berriro"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Irten"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Aldaketak mantendu?\n"
-"Oraingo konfigurazioa:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Mesedez, log egin berriro %s-n aldaketak indarrean sartzeko"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Mesedez log out egin eta gero Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X abiatzerakoan"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Zure konputagailua abiatzerakoan X-en sartzeko egokitu dezaket.\n"
-"X-en sartu nahi al duzu abiatzerakoan?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 kolore (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 milaka kolore (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 milaka kolore (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miloi kolore (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 biloi kolore (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB edo gehiago"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA standarra, 640x480 60 Hz-tan"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 56 Hz-tan"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr ""
-"8514arekin bat datorrena, 1024x768 87 Hz-tan txirikordatuak (ez 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 87 Hz-tan txirikordatua, 800x600 56 Hz-tan"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 60 Hz-tan, 640x480 72 Hz-tan"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 60 Hz-tan, 800x600 72 Hz-tan"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Frekuentzia handiko SVGA, 1024x768 70 Hz-tan"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "1280x1024 60 Hz-tan egin lezakeen frekuentzia anitzekoa"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "1280x1024 74 Hz-tan egin lezakeen frekuentzia anitzekoa"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "1280x1024 76 Hz-tan egin lezakeen frekuentzia anitzekoa"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "1600x1200 70 Hz-tan egin lezakeen pantaila"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "1600x1200 76 Hz-tan egin lezakeen pantaila"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Boot partizioaren lehenengo sektorea"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Diskoaren lehenengo sektorea (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILOren instalazioa"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Non instalatu nahi duzu abiarazlea?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "LILO/grub Instalazioa"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO textu menuarekin"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO menu grafikoarekin"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Abiatu DOS/Windows-etik (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Abiarazlearen aukera nagusiak"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Erabiltzeko abiarazlea"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Abiarazlearen instalazioa"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Abiarzsteko unitatea"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ez dabil BIOS zaharretan"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Trinkoa"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "trinkoa"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Bideo modua"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Imagina arrunta abiarazteko itxaron denbora"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Pasahitza"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Pasahitza (berriz)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Komando lerroaren aukerak murriztu"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "murriztu"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Abiarazte bakoitzean /tmp garbitu"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Behar izanez gero RAM tamaina zehatza(%d MB aurkituta)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Gaitu multi profilak"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Ram tamaina Mb-etan"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Aukera ``Komando lerroaren aukerak murriztu'' ezin erabili pasahitz gabe"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Mesedez saia zaitez berriro"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Pasahitza ez dator bat"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Init mezua"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Open Firmwarearen atzerapena"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Kernelaren abiaratzea denboraz landa"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "CDtik abiarazgai?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "OFz abiarazgai?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Jatorrizko SEa?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hemen daude sarrera desberdinak.\n"
-"Zenbait gehitu edo daudenak aldatu ditzakezu."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Gehitu"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Eginda"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Aldatu"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Zelako sarrera mota gehitu nahi duzu"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Beste OS (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Beste OS (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Beste OS (windows..."
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Imagina"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Jarraitu (Append)"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Irakur-idatz"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Taula"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Unsafe"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Etiketa"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Jatorrizkoa"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-tamaina"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "VideorikEZ"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Ezabatu sarrera"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Etiketa kentzea ez dau onartzen"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Etiketa hau dagoeneko erabilia"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s inteface-ak aurkituta"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Besterik daukazu?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "%s interface-rik duzu?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Ez"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Bai"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Ikus harwarearen informazioa"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%s-ko %s txartelen driver-ak instalatzen"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(%s modulua)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Zein %s driver-an saia naiteke?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Zenbaitetan, %s driver-ak egokiro lan egiteko informazio gehigarria behar "
-"du\n"
-",naiz eta gehienetan ondo ibili hau gabe. Aukera extra hauek espezifikatuko "
-"zenuke\n"
-"edo utziko zenuke driver-ari lortzen saiatzen? Batzutan saiaketak "
-"konputagailua\n"
-"eskegi lezake, honek ez du kalterik eragin beharrik."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Autofroga"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Aukerak espezifikatu"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Orain %s moduluari bere aukerak ezarri diezaiokezu."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"%s moduluari bere aukerak ezardiezaiokezu.\n"
-"Aukeren formatua: ``izena=balioa izena2=balioa2 ...''.\n"
-"Adibidez, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Muduluaren aukerak:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"%s moduluare kargak porrot egin du.\n"
-"Beste parametro batuzuez saiatu nahi al duzu?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s dagoeneko gehitua)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Pasahitza sinpleegia da"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Mesedez erabiltzaile izena eman"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Erabiltzailearen izenean soilik hizki txikiak, zenbakiak, `-' eta `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Erabiltzaile izen hau dagoeneko gehituta dago"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Gehitu erabiltzailea"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Erabiltzailea sartu\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Onartu erabiltzailea"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Benetako izena"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Erabiltzailearen izena"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Maskorra"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Ikonoa"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Zure konputagailua abiatzerakoan erabiltzailea log on egiteko egokitu "
-"dezaket.\n"
-"Ez baduzu aukera hau erabili, etsi botoia klikatu"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Hautatu jatorrizko erabiltzailea:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Hauta abiarazterakoan nahi duzun lehio kudeatzailea:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Mesedez, hauta hizkuntza."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Instalazioaren ondoren erabilgarriak izan daitezkeen beste hizkuntzak hauta "
-"dezakezu"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Denak"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Ongi etorria %sra, sistema eragilearen hautatzailera!\n"
-"\n"
-"Hauta aukeren zerrendan sistema eragilea edo\n"
-"edo itxaron %d segundu jatorriz hautatutakoa abiatzeko.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Ongi etorri GRUBera, sistema eragilearen hautatzailea!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "%c eta %c tekla erabili hautatutakoa aukeratzeko"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Hautatutako OSa abiarazteko enter sakatu, 'e' editatzeko"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "abiatze aurretiko komandoak, edo 'c' komando-lerroa izateko"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Hautatutakoa abiaraziko da %d segundu barru."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "ez dago leku nahikorik /boot-en"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Idazmahaia"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Abiatze Menua"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Non instalatu nahi duzu abiarazlea?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ez da oraindik laguntzarik prestatu.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Abiaratze konfigurazioa"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Fitxategiak"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Fitxategi/_Irten"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>I"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle monitore-sailkatzea"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitorea"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Ohiko monitorea"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Ohiko Gtk+ Monitorea"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Aurora piztu abiaratzerakoan"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modua"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Abiapen Kudeatzaile bezela %s erabiltzen ari zera.\n"
-"Egin klik Ezarri gainean ezarketa aztia jaurtitzeko."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Konfiguratu"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Abiarazteko modua"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Sistema modua"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "X-Windows ezarri sistema abiaratzerakoan"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Ez, autologinik ez"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Bai, autologina nahi dut horrela (erabiltzaile, idazmahai)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "Ados"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Etsi"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ezin ireki /etc/inittab hau irakurtzeko: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "LILOren instalazioak porrot egin du. Errore hau izan da:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutu"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "minutu 1"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d segundu"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Mesedez, aurretik datuen backup-a egin"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Arretaz irakur"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"aboot erabiliko baduza, tokia utzi (diskoaren hasierako 2048 sektore\n"
-"nahikoak dira)"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Errorea"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Gidaria"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Berria"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "Urrutiko isatsa"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Muntatze puntua"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Aukerak"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Mota"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Desmuntatu"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Muntatu"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Hautatu akzioa"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Fat partizio handi bakarra duzu\n"
-"(MicroSoft Dos/Windows-k erabilia gehienetan).\n"
-"Beharrezko zenuke partizio hau egokitzea\n"
-"(gainean klikatu, eta gero \"Egokitu\"-n)"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Partizio baten gainean klikatu"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Partizio baten gainean klikatu"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Partizio baten gainean klikatu"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Ezaugarriak"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "muntaketak porrot egin du"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Hutsik"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Bestelakoa"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Fitxategi-sistemen motak:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Eratu"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Bestela ``%s'' erabili"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Ezabatu"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Lehenengo ``Unmount'' erabili"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"%s partizio mota aldatzerakoan, partizio honetako datu guztiak galduko dira"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "%s tresna non instalatu nahi duzu?"
-
-#: ../../diskdrake.pm_.c:500
-#, fuzzy
-msgid "Mount options"
-msgstr "Muduluaren aukerak:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:525
-#, fuzzy
-msgid "Removable media"
-msgstr "Medio eramangarrien automuntaia"
-
-#: ../../diskdrake.pm_.c:532
-#, fuzzy
-msgid "Change type"
-msgstr "Aldatu partizio mota"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Zein fitxategi sistema nahi duzu?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Zerbitzari"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Hautatu akzioa"
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Eratu partizio berriak"
-
-#: ../../diskdrake_interactive.pm_.c:188
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Zoaz aditu modura"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Zoaz ohiko modura"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Ez egin"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Jarraitu dena den?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Irten gorde gabe"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Irten partizio taula idatzi gabe?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Konfigurazioa frogatu nahi duzu?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Berez egokitu"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Garbitu dena"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Gehiago"
-
-#: ../../diskdrake_interactive.pm_.c:250
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Disko zurrunaren detekzioa"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Ez dago lekurik berezko egokitzapenerako"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Partizio primario guztiak erabiltzen"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Ezin dut partizio gehiagorik gehitu"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Partizio gehiago edukitzeko, mesedez ezabatu bat hedatutako partizioa eratu "
-"ahalizateko"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Partizio taula idatzi"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Partizio taula berreskuratu"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Partizio taula berreskuratu"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Partizio taula berreskuratu"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Medio eramangarrien automuntaia"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Hautatu fitxategia"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Backup-aren partizio taulak ez du neurri berdina\n"
-"Jarraituko dut?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Kontuz"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Disketea sartu unitatean\n"
-"Disketeko datu guztiak galduko dira"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Partizio taula berreskuratzeko saioan"
-
-#: ../../diskdrake_interactive.pm_.c:340
-#, fuzzy
-msgid "Detailed information"
-msgstr "Erakutsi informazioa"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Berregokitu"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Mugitu"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formatua"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Aktibatu"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Gehitu RAIDi"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Gehitu LVMi"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "RAIDtik ken"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "LVMtik ken"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Aldatu RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Loopback erabili"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Eratu partizio berriak"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Haste sektorea: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Tamaina MBetan: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Fitxategi-sistema mota: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Muntatze puntua: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Hobespena: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "%s loopback fitxategia formateatzen"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Aldatu partizio mota"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "ext2-tik ext3-ra aldatzen"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "%s loopback fitxategia non eraiki nahi duzu?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ezin kendu muntai puntua hemendik, loop back-ek erabiltzen du.\n"
-"Aurretik loopback kendu"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "fat-aren fitxategi-sistemen loturak zenbatzen"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Egokitzen"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Ezinezko da partizio hau berregokitzea."
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Partizio honetako datu guztien backup-a beharrezkoa litzateke"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"%s partizioa egokitzerakoan, partizio honetako datu guztiak galduko dira"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Hautatu tamaina berria"
-
-#: ../../diskdrake_interactive.pm_.c:591
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Tamaina MBetan: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Zein diskotara mugitu nahi duzu?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sektore"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Zein sektore mugitu nahi duzu?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Mugituz"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Partizioa mugitzen..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Hautatu esistitzen den RAIDa hona gehitzeko"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "berria"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Hautatu esistitzen den LVMa hona gehitzeko"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "LVM izena?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Partizio hau ezin du loopback-ek erabili"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Loopback-en fitxategi izena: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Benetako izena"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Beste loopback batek erabilitako fitxategia, hauta besteren bat"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "%s fitxategia esistitzen da. Erabili?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "tresna (device)"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "maila"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "xerraren tamaina"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Kontuz: arrizkutsua izan daiteke."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Zein partizio mota?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Parkatu baina ezin dut onartu /boot unitatean hain urruti ( zilindroa > "
-"1024).\n"
-"LILO erabiliz gero ez du funtzionatuko, edo LILO erabili ezean ez duzu /boot-"
-"en beharrik"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Root (/)modura hautatutako partizioa disko zurrunaren 1024. zilindrotik "
-"goradago\n"
-"eta ez duzu /boot partiziorik.\n"
-"LILO abiarazle modura erabiliko baduzu, /boot partizioa gehitu"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"RAID partizioa zuztar(root) bezala hautatu duzu (/).\n"
-"Abiarazleak ezin du hau kudeatu /boot partiziorik gabe.\n"
-"Beraz habil kontuz eta gehitu /boot partizioa"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "%s unitatearen partizio taula diskoan idatziko da!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Aldaketak indarrean jar daitezen breabiatu behar duzu ordenadorea"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"%s partizioa formateatuz gero, partizio honetako datu guztiak galduko dira"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Formateatzen"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "%s loopback fitxategia formateatzen"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "%s partizioa formateatzen"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid-ek huts egin du"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Ez dago lekurik partizio berririk ezartzeko"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Ez dago lekurik partizio berririk ezartzeko"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Erresoluzioa: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Device-a: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS unitatearen hizkia: %s (iragarpena basterik)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Mota: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Izena: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Hasi: %s sektorea\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Tamaina: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektore"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "%d zilindrotik %d zilindrora arte\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Formateatuta\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Formateatu gabe\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Muntatua\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback fitxategia(k): %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Jatorrizko partizioa abiaraztua\n"
-"    (MS-DOS abiarazteko, ez lilo-rako)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Maila %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Xerraren tamaina %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diska %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback fitxategiaren izena: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Baliteke partizio hau Gidari\n"
-"partizio bat izatea, hobe zenuke\n"
-"dagoenean uztea.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Bootstrap partizio berezi hau\n"
-"zure sistemaren\n"
-"abiapen dualerako da.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Tamaina: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s zilindro, %s buru, %s sektore\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diska %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partizio taularen mota: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "on bus %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Aukerak: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s-ren %s formateatzeak porrot egin du"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ez dakit nola formateatu %s %s motan"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "muntaketak porrot egin du"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck-ek hutsegin du %d irteera kode edo %d seinalearekin"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "muntaketak porrot egin du: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "%s desmuntatzen errorea: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "erraza"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "zerbitzaria"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Ezin duzu JFS erabili 16 MB baino txikiago diren partizioetan"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Ez erabili ReiserFS 32MB baino gutxiagoko partizioak eratzeko"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Muntaia puntuak /-z hasi behar dira"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Jadanik esistitzen da %s muntaketa puntua duen partizioa\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ezin duzu LVM Bolumen Logiko bat %s muntatze puntu bezela erabili"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Direktorio hau erroko fitxategi sisteman mantendu behar da"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Benetako fitxategi sistema behar duzu (ext2, reiserfs) muntai puntu "
-"honetarako\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "%s irekitzerakoan errorea: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Errorea gertatu da - sistemaren fitxategiak eraikitzeko unitate "
-"baliogarririkez da aurkitu. Hardwarea aztertu mesedez."
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Partiziorik ez duzu!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Gainean, zure unitate zurrunean aurkitu diren Linux partizioak\n"
-"zerrendaratu dira. Aztiak eginiko aukerak gorde ditzakezu, erabilera "
-"arrunterako baliagarri\n"
-"dira. Aukera hauek aldatzen badituzu, gutxienez erro partizio bat zehaztu "
-"behar\n"
-"duzu (\"/\"). Ez aukeratu partizio txikiegia edo ezingo duzu behar adina "
-"software\n"
-"instalatu. Zure datuak beste partizio batean gorde nahi badituzu, gainera,\n"
-"\"/home\" (soilik Linux partizio bat baino gehiago erabilgarri badaukazu) "
-"partizio\n"
-"bat hautatu beharko duzu.\n"
-"\n"
-"\n"
-"Argibide gisa, partizio bakoitza honela zerrendatzen da: \"Izena\", hedadura "
-"\".\n"
-"\n"
-"\n"
-"\"Izena\" honela kodetzen da: \"unitate zurrun moeta\", \"unitate zurrun "
-"zenbakia\",\n"
-"\"partizio zenbakia\" (adibidez, \"hda1\").\n"
-"\n"
-"\n"
-"\"Unitate zurrun moeta\" \"hd\" da zure unitate zurruna IDE motakoa bada eta "
-"\"sd\"\n"
-"SCSI moetakoa bada.\n"
-"\n"
-"\n"
-"\"Unitate zurrun zenbakia\" \"hd\" edo \"sd\" ondorengo hizkia da. IDE "
-"unitate zurrunekin:\n"
-"\n"
-"\n"
-"   * \"a\"-k esan nahi du \"unitate zurrun nagusia lehenengo IDE "
-"kontrolatzailean\",\n"
-"\n"
-"   * \"b\"-k esan nahi du \"unitate zurrun morroia lehenengo IDE "
-"kontrolatzailean\",\n"
-"\n"
-"   * \"c\"-k esan nahi du \"unitate zurrun nagusia bigarren IDE "
-"kontrolatzailean\",\n"
-"\n"
-"   * \"d\"-k esan nahi du \"unitate zurrun morroia bigarren IDE "
-"kontrolatzailean\".\n"
-"\n"
-"\n"
-"SCSI unitate zurrunekin, \"a\"-k esan nahi du \"lehenengo unitate zurruna\", "
-"\"b\"-k esan nahi du \"bigarren unitate zurruna\", etab..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Abiatzerakoan zein zerbitzu nahi duzun hauta zenezake orain.\n"
-"\n"
-"\n"
-"Sagua item baten gainetik pasatzerakoan, globo txiki batek zerbitzuaren\n"
-"zeregina aipatuko dizu.\n"
-"\n"
-"\n"
-"Makina zerbitzari modura erabiliko baduzu, kontu handiz ibili:\n"
-"erabiliko ez dudun zerbitzuak ez abiarazi."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux-ek GMT edo \"Greenwich Mean Time\" erabiltzen du eta hau\n"
-"zure bizitokira egokitzen du."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-#, fuzzy
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Une honetan zure Mandrake Linux sistema eragilea zure\n"
-"disko gogorraren zein lekutan instalatu aukeratu behar duzu. Hutsik badago\n"
-"edo beste sistema eragile batek leku guztia erabiltzen badu, zatikatu egin\n"
-"behar duzu. Funtsean, disko gogor bat zatikatzea, zure Mandrake Linux\n"
-"sistema berriari lekua egiteko berau logikoki zatitzean datza.\n"
-"\n"
-"\n"
-"Zatikatze prozesuaren ondorioak gehienetan itzulezinak direnez, zatikatzea\n"
-"beldurgarri eta estresagarri izan daiteke trebatu gabeko erabiltzaile "
-"bazara.\n"
-"Azti honek prozesu hau errazten du. Hasi aurretik, irakurri ezazu manuala\n"
-"eta hartu beharrezko duzun denbora.\n"
-"\n"
-"\n"
-"Gutxienez bi partizio behar dituzu. Bat sistema eragile berarentzako eta "
-"bestea\n"
-"alegiazko oroimenarentzako (Swap bezela ezaguna).\n"
-"\n"
-"\n"
-"Partizioak dagoeneko sorturik badaude (aurreko instalazio batean edo beste\n"
-"zatikatze baten bitartez), aukeratu zure Linux sitema instalatzeko "
-"erabiliko\n"
-"dituzunak.\n"
-"\n"
-"\n"
-"Partizioak dagoeneko sortu ez badira, sortu egin behar dituzu. \n"
-"Hori egiteko, erabili gorago erabilgarri duzun aztia. Zure disko gogorraren\n"
-"ezarpenaren arabera, zenbait aukera erabil ditzakezu:\n"
-"\n"
-"* Dagoen partizioa erabili: laguntzaileak zenbait Linux partizio aurkitu "
-"dituzure disko zurrunean. Hauek mantendu nahi\n"
-"  badituzu, hautatu aukera hau.\n"
-"\n"
-"\n"
-"* Disko osoa ezabatu: Zure unitate zurrunean dauden datu eta partizio "
-"guztiak ezabatu eta zure Mandrake Linux sistema berriaz\n"
-"  ordezkatu nahi badituzu, aukera hau hautatu dezakezu. Kontuz erabili "
-"aukera hau, ezin izango duzu atzera egin\n"
-"  baiezkoa eman ondoren.\n"
-"\n"
-"\n"
-"* Erabili Windows partizioko tarte hutsa: Microsoft Windows disko zurrunean "
-"instalaturik baduzu, eta\n"
-"  leku guztia hartzen badu, Linux datuentzako lekua askatu behar duzu. Hori "
-"egiteko zure Microsoft Windows\n"
-"  partizio eta datuak ezabatu ditzakezu (begiratu \"Disko osoa ezabatu\" edo "
-"\"Aditu modua\" aukerak) edo zure\n"
-"  Microsoft Windows partizioaren neurria aldatu. Neurri aldaketa datu "
-"galerarik gabe egin daiteke.\n"
-"  Aukera hau gomendatzen da biak, Mandrake Linux eta Microsoft Windows, "
-"konputagailu berdinean erabili nahi badituzu.\n"
-"\n"
-"\n"
-"  Aukera hau hautatu aurretik, ulertu ezazu zure Microsoft Windows "
-"patizioaorain dana\n"
-"  baino txikiagoa izango dela. Honek esan nahi du tarte huts txikiagoa "
-"izango duzula Microsof Windowsen\n"
-"  zure datuak gorde edo software berria instalatzeko.\n"
-"\n"
-"\n"
-"* Aditu modua: Zure unitate zurruna eskuz zatikatu nahi baduzu, aukera hau "
-"hautatu dezakezu. Kontu izan\n"
-"  aukera hau hautatu aurretik. Oso indartsua da baino oso arriskutsua. Zure "
-"datu guztiak aise galdu ditzakezu. Beraz,\n"
-"  ez hautatu aukera zer egiten ari zaren ez badakizu."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-
-#: ../../help.pm_.c:376
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Zure Mandrake Linux sistema eragile berria instalatzen ari da.\n"
-"Eragiketa honek minutu batzuk behar ditu (instalatu nahi duzunaren eta\n"
-"zure ordenagailuaren abiaduraren arabera).\n"
-"\n"
-"\n"
-"Izan pazientzia."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-#, fuzzy
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Une honetan, erabaki behar duzu zein partizio\n"
-"erabili nahi d(it)uzun zure Mandrake Linux sistema berria instalatzeko. "
-"Baldin eta partizioak\n"
-"jadanik definitu badira (aurreko GNU/Linux instalazio batean edo beste "
-"zatikatze\n"
-"tresna baten bitartez), dauden partizioak erabili ditzakezu. Beste "
-"kasuetan,\n"
-"disko gogorreko partizioak definitu behar dira.\n"
-"\n"
-"\n"
-"Partizioak sortzeko, aurrena disko zurrun bat aukeratu behar duzu. "
-"Zatikatzeko diskoa\n"
-"aukeratu dezakezu bere gainean klik eginez,\"hda\" lehenengo IDE "
-"unitatearentzako, \"hdb\" bigarrena\n"
-" edo \"sda\" lehenengo SCSI unitatearentzako eta horrela gainerakoak ere.\n"
-"\n"
-"\n"
-"Hautatutako disko zurruna zatikatzeko, aukera hauek erabili ditzakezu:\n"
-"\n"
-"   * Guztia garbitu: aukera honek hautatutako diskoan partizio guztiak "
-"ezabatzen ditu.\n"
-"\n"
-"\n"
-"   * Auto alokatu: aukera honek zure disko zurrunaren leku hutsean Ext2 eta "
-"swap partizioak automatikoki sortzea\n"
-"     ahalbidetzen dizu.\n"
-"\n"
-"\n"
-"   * Berreskuratu partizio taula: zure partizio taula hondatu bada, aukera "
-"hau erabiliz berreskuratzen saia zaitezke. Mesedez,\n"
-"     kontu izan eta gogoratu hutsegin dezakela.\n"
-"\n"
-"\n"
-"   * Desegin: aukera hau zure aldaketak galerazteko erabili dezakezu.\n"
-"\n"
-"\n"
-"   * Birzamatu: aukera hau erabili dezakezu aldaketa guztiak desegin eta "
-"hasierako partizioen taula zamatu nahi baduzu.\n"
-"\n"
-"\n"
-"   * Aztia: zure disko zurruna zatikatzeko aztia erabili nahi baduzu, aukera "
-"hau erabili dezakezu. Berau gomendatzen da \n"
-"     zatikatzen ezagutza nahikoa ez badaukazu.\n"
-"\n"
-"\n"
-"   * Berreskuratu disketetik: zure partizio taula disketean gorde baduzu "
-"aurreko instalazio batean, hura berreskuratu\n"
-"     dezakezu aukera hau erabiliz.\n"
-"\n"
-"\n"
-"   * Gorde disketean: zure partizio taula disketean gorde nahi baduzu berau "
-"berreskuratu ahal izateko, aukera hau erabili\n"
-"     dezakezu. Aukera hau erabiltzea gomendatzen da.\n"
-"\n"
-"\n"
-"   * Eginda: zure diska zurruna zatikatzen amaitu duzunean, erabili aukera "
-"hau zure aldaketak gordetzeko.\n"
-"\n"
-"\n"
-"Argibide gisa, edozein aukerara heldu dezakezu teklatua erabiliz: mugitu "
-"partizioetan barrena Tab eta Gora/Bera geziak erabiliz.\n"
-"\n"
-"\n"
-"Partizio bat hautatuta dagoenean, erabili dezakezu:\n"
-"\n"
-"           * Ctrl-c partizio berri bat sortzeko (partizio huts bat hautatu "
-"bada)\n"
-"\n"
-"           * Ctrl-d partizio bat ezabatzeko\n"
-"\n"
-"           * Ctrl-m muntaia puntua ezartzeko\n"
-"           \n"
-"\n"
-"           \n"
-"PCC Makina batean instalatzen ari bazara, HFS 'bootstrap' partizio txiki bat "
-"sortu nahiko duzu, gutxienez 1MB-koa,\n"
-"yaboot abiarazleak erabili dezan. Partizioa haundiagoa egitea erabakitzen "
-"baduzu, 50MB esaterako, larrialdietarako ordezko\n"
-"kernel eta ramdisk irudi bat gordetzeko erabilgarria izan daiteke. "
-
-#: ../../help.pm_.c:460
-#, fuzzy
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Gainean, zure unitate zurrunean aurkitu diren Linux partizioak\n"
-"zerrendaratu dira. Aztiak eginiko aukerak gorde ditzakezu, erabilera "
-"arrunterako baliagarri\n"
-"dira. Aukera hauek aldatzen badituzu, gutxienez erro partizio bat zehaztu "
-"behar\n"
-"duzu (\"/\"). Ez aukeratu partizio txikiegia edo ezingo duzu behar adina "
-"software\n"
-"instalatu. Zure datuak beste partizio batean gorde nahi badituzu, gainera,\n"
-"\"/home\" (soilik Linux partizio bat baino gehiago erabilgarri badaukazu) "
-"partizio\n"
-"bat hautatu beharko duzu.\n"
-"\n"
-"\n"
-"Argibide gisa, partizio bakoitza honela zerrendatzen da: \"Izena\", hedadura "
-"\".\n"
-"\n"
-"\n"
-"\"Izena\" honela kodetzen da: \"unitate zurrun moeta\", \"unitate zurrun "
-"zenbakia\",\n"
-"\"partizio zenbakia\" (adibidez, \"hda1\").\n"
-"\n"
-"\n"
-"\"Unitate zurrun moeta\" \"hd\" da zure unitate zurruna IDE motakoa bada eta "
-"\"sd\"\n"
-"SCSI moetakoa bada.\n"
-"\n"
-"\n"
-"\"Unitate zurrun zenbakia\" \"hd\" edo \"sd\" ondorengo hizkia da. IDE "
-"unitate zurrunekin:\n"
-"\n"
-"\n"
-"   * \"a\"-k esan nahi du \"unitate zurrun nagusia lehenengo IDE "
-"kontrolatzailean\",\n"
-"\n"
-"   * \"b\"-k esan nahi du \"unitate zurrun morroia lehenengo IDE "
-"kontrolatzailean\",\n"
-"\n"
-"   * \"c\"-k esan nahi du \"unitate zurrun nagusia bigarren IDE "
-"kontrolatzailean\",\n"
-"\n"
-"   * \"d\"-k esan nahi du \"unitate zurrun morroia bigarren IDE "
-"kontrolatzailean\".\n"
-"\n"
-"\n"
-"SCSI unitate zurrunekin, \"a\"-k esan nahi du \"lehenengo unitate zurruna\", "
-"\"b\"-k esan nahi du \"bigarren unitate zurruna\", etab..."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Mesedez izan pazientzia. Eragiketa honek zenbait minutu behar ditzake."
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Aukeratu \"Instalatu\" ez badago Mandrake Linuxen bertsio zaharragoa\n"
-"instalaturik edo sistema eragile anitz erabili nahi baduzu.\n"
-"\n"
-"\n"
-"Aukeratu \"Eguneratu\" instalaturik dagoen Mandrake Linux-en bertsio bat "
-"eguneratu nahi baduzu.\n"
-"\n"
-"\n"
-"GNU/Linux inguruan daukazun ezagutzaren arabera, ondorengo Mandrake Linux "
-"sistema eragilearen instalazio edo eguneratze\n"
-"mailetako bat aukeratu dezakezu:\n"
-"\n"
-"* Gomendatua: Sekula GNU/Linux sistema eragilerik instalatu ez baduzu "
-"aukeratu hau. Instalazioa oso erraza\n"
-"  izango da eta galdera gutxi egingo zaizkizu.\n"
-"\n"
-"\n"
-"* Norberarena: GNU/Linux-en ezagutza nahikoa badaukazu, zure sistemaren "
-"erabilera nagusia aukeratu dezakezu\n"
-"  (lanestazioa, zerbitzaria, garapenerako). Instalazio moeta \"Gomendatuan\" "
-"baino galdera gehiago erantzun beharko duzu,\n"
-"  beraz GNU/Linux-ek nola lan eginten duen jakin behar duzu instalazio moeta "
-"hau aukeratzeko.\n"
-"\n"
-"\n"
-"* Aditua: GNU/Linux-en ezagutza ona badaukazu, instalazio moeta hau aukeratu "
-"dezakezu. \"Norberarena\" instalazio\n"
-"  moetan bezala, erabilera nagusia aukeratu ahal izango duzu (lanestazioa, "
-"zerbitzaria, garapenerako). Argi ibili\n"
-"  instalazio moeta hau aukeratu aurretik. Oso instalazio pertsonalizatua "
-"egiteko aukera izango duzu.\n"
-"  Galdera batzu erantzutea oso zaila gerta daiteke ez badaukazu GNU/Linux-i "
-"buruzko ezagutza sakona. Beraz, ez aukeratu\n"
-"  instalazio moeta hau egiten ari zarenaz ziur egon gabe."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Mesedez kai zuzena hautatu. Adibidez, MS Windows-eko COM1 kaia\n"
-"ttyS0 izendatzen da GNU/Linux-en."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) eta Grub abiarazleak dira: biek\n"
-"GNU/Linux edo bestelako sistema eragileak abiarazteko gai dira.\n"
-"Normalean, bestelako sistema eragileak zuzen detektatu eta instalatzen "
-"dituzte.\n"
-"Horrela ez bada, pantaila honetan sarrera eskuz gehitu zenezake.\n"
-"Kontuz ibili eta parametro egokiak hautatu.\n"
-"\n"
-"\n"
-"Beste sistema eragile batzuetarako sarrera kendu nahiko duzu,\n"
-" orduan dagokion sarrerak ezabatu. Hau egitekotan, \n"
-"diskete abiarazlea beharko duzu, bestelako sistema eragilerik erabili nahiez "
-"gero!"
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"GNU/Linux abiarazteko beharrezkoa den informazioa\n"
-"non kokatu nahi duzun galdetuko zaizu.\n"
-"\n"
-"\n"
-"Ziur ez bazaude, hautatu \"Honen lehenengo sektorea\n"
-"unitatez (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX-ek PCI SCSI egokitzaileak bilatuko ditu. \n"
-"DrakX-ek SCSI egokitzailerik aurkitzekoatan, driver-a ezagutuz gero\n"
-"automatikoki instalatuko d(it)u.\n"
-"\n"
-"Ez baduzu SCSI egokitzailerik, ISA SCSI egokitzaile, edo \n"
-"PCI SCSI egokitzailerik galdetuko zaizu ia\n"
-"SCSI egokitzailerik baduzu zure sisteman. Ez baduzu\n"
-"'Ez' klikatu. 'Bai' klikatuz gero, driver zerrenda\n"
-"erakutziko zaizi, eta bertatik hautatu beharko duzu zure egokitzailea.\n"
-"\n"
-"\n"
-"Eskuz egokitu behar baduzu zure egokitzailea, DrakX-ek\n"
-"harren aukerak galdetuko dizu. DrakX-i frogatzeko aukera\n"
-"eman beharko diozu. Gehienetan ongi doa.\n"
-"\n"
-"Horrela ez bada, driver-aren aukerak eman beharko duzu.\n"
-"Berrikuzi Instalazio Gida, eta Windows-en arakatu informazioa\n"
-"(windows baduzu noski),\n"
-"hardwarearen dokumentaziorako, edo fabrikatzailearen webgunera\n"
-"jo (Internet baduzu)."
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Aukeratu zure Mandrake Linux partizio berria instalatzeko\n"
-"ezabatu nahi duzun disko gogorra. Kontuz, bertan dauden datu guztiak galdu "
-"egingo dira\n"
-"eta ezingo dira berreskuratu."
-
-#: ../../help.pm_.c:832
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Sakatu \"Ados\" disko zurrun honetan dauden datu eta\n"
-"partizio guztiak ezabatu nahi badituzu. Kontuz, \"Ados\" sakatu ondoren, "
-"ezin\n"
-"izango dituzu unitate zurrunean dauden datu eta partizioak berreskuratu,\n"
-"edozein Windows datu barne.\n"
-"\n"
-"\n"
-"Sakatu \"Etsi\" unitate zurrunean dagoen datu eta partiziorik galdu gabe\n"
-"eragiketa hau bertan behera uzteko."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Hautatu duzun zerbitzaria(k): %s\n"
-"\n"
-"\n"
-"Zerbitzari hauek jatorriz aktibatuta daude. Ez dute segurtasunezko inolako\n"
-"informaziorik, baina berriak aurki daitezke. Horrela bada, lehen bait lehen "
-"eguneratu.\n"
-"\n"
-"\n"
-"Benetan instalatu nahi dituzu zerbitzariok?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "NIS domeinurik gabe ezin erabili broadcast"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "%s-n diskoa sartu, FAT formatuduna"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Diskete hau ez dago FATekin eratua"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Gordetako paketeen aukera erabiltzeko,``linux defcfg=floppy'' "
-"instalazioaabiarazi"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "%s fitxategia irakurtzean errorea"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Ados"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Zure konputagailuaren harwareren baten batek lanerako ``proprietary'' "
-"gidariak behar ditu.\n"
-"Horri buruzko informazioa hemen duzu: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"root partizioa behar duzu izan.\n"
-"Honetarako, partizioa eratu (edo existitzen deneko batean klikatu).\n"
-"Geru hauta ``Muntai puntua'' eta `/' ezarri"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "swap partizioa beharrezko duzu"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Ez duzu swap partiziorik\n"
-"\n"
-"Jarraitu?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "\"/boot/efi\"-n FAT partizio bat muntatuta eduki behar duzu"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Erabili toki librea"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ez dago lekurik partizio berririk ezartzeko"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Erabili dauden partizioak"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Ez dago partizio erabilgarririk"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Loopback-erako erabili Windows partizioa"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Zein partizio erabili nahi duzu Linux4Win ezartzeko?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Hautatu tamainak"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Root partizioaren tamaina MBetan: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Swap partizzioaren tamaina MBetan: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Erabili Windows partizioako toki librea"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Zein partizio berregokitu nahi duzu?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Windows-aren fitxategi-sistemen loturak zenbatzen"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FATaren berregokitzaileak ezin du zure partizioan eragin, \n"
-"hurrengo errorea gertatu da: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Zure windows partizioa oso zatikatua, mesedez ``defrag'' egin"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"KASU!\n"
-"\n"
-"DrakX-ek zure Windows partizioa egokitu behar du. Kontuz: operazio hau\n"
-"arriskutsua da. Ez baduzu oraindik egin, aurretik scandisk abiarazi (eta\n"
-"aukeran defrag) partizio honetan eta egizu backupa.\n"
-"Ziur bazaude, sakatu Ados."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Zein tamaina gorde nahi duzu windowserako?"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "partizioa %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT tamaina egokierak huts egin du: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ez dao FAT partiziorik berregokitzeko edo loopback bezala erabiltzeko (edo "
-"ez da lekurik geratzen)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Ezabatu disko osoa"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Ezabatu Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Disko zurrun bat baino gehiago duzu, zeinetan instalatu nahi duzu linux?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Dauden partizio GUZTIAK eta hauetako datuak galduko dira %s-n"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Norberaren araberako partizioak"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Erabili fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"%s partizioa egin dezakezu orain\n"
-"Eginda dagoenean, ez ahaztu, gorde `w' erabiliz"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Ez duzu Windows partizioan toki libre nahikorik"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Ezin dut intalaziorako lekurik aurkitu"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DraX-en partiziorako tresnak hurrengo soluzioak aurkitu ditu:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partizioak huts egin du: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Sarea eraikitzen"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Sarea beheratzen"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Errorea eman da eta ezin dezaket egokiro kudeatu.\n"
-"Jarraitu zure kabuz."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "%s muntaia puntua bikoiztu"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Zenbait pakete garrantzitsu ez dira ongi instalatu.\n"
-"Cdrom tresna edo cd-a gaizki leudeke.\n"
-"Saiatu cd-a instalatutako konputagailuren batean \"rpm -qpl Mandrake/RPMS/*."
-"rpm\" erabiliaz\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Ongi etorri %s-ra"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Ez dago disketerik"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "`%s' urratsean sartzen\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Instalatu nahi duzunaren tamaina hautatu"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Tamaina guztira: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Bertsioa: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tamaina: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Instalatu nahi dituzun paketeak hautatu"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Info"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Instalatu"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Instalatzen"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Mesedez itxaron, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Falta den denbora "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Denbora guztira"
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Instalazioa prestatzen"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "%s paketea instalatzen"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Jarraitu dena den?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Paketeak antolatzerakoan errorea izan da:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "X11-rako dagoen konfigurazioa erabili?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Zure sistemak ahalmen gutxi du. Mandrake Linuxren instalazioak arazoak eman\n"
-" ditzazke. Horrela bada, Testu bidezko instalazioe egin zenezake. Hartarako, "
-"sakatu,\n"
-"`F1' CDROMa abiatzerakoan, eta gero sartu `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Instalazio mota"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Mesedez, hurrengoetatik instalazio mota hautatu"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Hautatutako taldeen tamaina gutxigorabehera %d MBekoa da.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Tamaina hau baino txikiagoa nahi baduzu,\n"
-"hauta instalatu nahi duzun paketeen ehunekoa.\n"
-"100%%ekoak pakete guztiak instalatuko du."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Zure diskoan, paketeen %d%%rako tokia duzu.\n"
-"\n"
-"Gutxiago nahi baduzu,\n"
-"hauta instalatu nahi duzun paketeen ehunekoa.\n"
-"Ehuneko txikiak pakete nagusiak instalatuko ditu;\n"
-"%d%% ehunekoak ahal bezain besteko paketeak instalatuko ditu."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Hurrengo hurratsean zehatzago hauta dezakezu"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Instalatu beharreko paketeen ehunekoa"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Pakete Taldearen aukeraketa"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Banan-banako pakete hautapena"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tamaina guztira: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Pakete okerra"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Izena: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Garrantzia: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Ez dago lekurik pakete honetarako"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Hurrengo paketeak instalatuko dira"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Hurrengo paketeak ezabatuko dira"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Ezin hauta/kendu pakete hau"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ezinbesteko paketea da, ezin zaio huatapena kendu"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Ezin duzu hautatutako hau kendu. Dagoeneko instalatua"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Pakete hau eguneratu behar da\n"
-"Aukera kendu nahi?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ezin duzu hautatutakoa kendu. Eguneratu behar da"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Erakutsi automatikoki aukeraturiko paketeak"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Zamatu/Gorde disketean"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "Pakete aukera eguneratzen"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "Gutxieneko instalazioa"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Neurtzen"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Instalazioa prestatzen, itzaron mesedez"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d pakete"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Adi\n"
-"\n"
-"Mesedez behean dauden zehazpenak arretaz irakur. Edozerekin\n"
-"e bazaude ados, ezin duzu hurrengo CDak instalatu. Saka 'Ez onartu' \n"
-"instalazioarekin jarraitzeko Cd horiek erabili gabe.\n"
-"\n"
-"\n"
-"Hurrengo CDetako zenbait atal ez daude GPL lizentzia edo\n"
-"antzekoez arautuak. Osagai horietako bakoitzak bere zehazpen eta\n"
-"baldintza bereziak ditu. \n"
-"Mesedez arretaz irakur eta bete lizentziotako zehaztapen eta baldintzak \n"
-"inolako osagaion erabilpen edo banaketa egingo baduzu. \n"
-"Lizentziok gehienetan debekatzen dute transferentzia,  bikoizpena \n"
-"(backup-erako ez bada), berbanaketa, reverse engineering, \n"
-"de-assembly, de-compilation edo aldaketarik osagaietan. \n"
-"Akordioaren edozein apurketak, lizentziarekiko dituzun ahalmenak \n"
-"ezabatuko ditu. Lizentzia berezi bakoitzak ez badizu baimen berezirik\n"
-"ematen sisteman zein sarean erabiltzeko. Dudatan bazaude, mesedez "
-"osagaiaren \n"
-"editore edo banatzailearengana zuzenean jo. \n"
-"Gehienetan transferentziak eta kopak debekatuta daude.\n"
-"\n"
-"\n"
-"Hurrengo CDetako osagaien jabetza, dagokion jabearena da eta \n"
-"bere jabetza intelektuala eta copyright'a  babesttuta daude \n"
-"software programetaz arduratzen diren legeez.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Onartu"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Ez onartu"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Aldatu Cd-Rom-a!\n"
-"\n"
-"Mesedez, \"%s\" izena duen Cd-Rom-a sartu unitatean eta gero Ados "
-"sakaegizu.\n"
-"Ez baldin baduzu Etsi sakatu Cd-Rom-etiko instalazioa ezeztatzeko."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Paketeak instalatzerakoan errorea izan da:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Errorea gertatu da"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Lizentzia adostasuna"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teklatua"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Mesedez, hauta zure teklatuaren itxura."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Hemen dago aukeratu daitezkeen teklatuen zerrenda osoa"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Zein instalazio mota nahi duzu?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Instalatu/Eguneratu"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Instalazioa edo eguneraketa da?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Gomendatua"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Aditua"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Eguneratu"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Mesedez, hauta da zure sagu mota."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Saguaren kaia(port)"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Mesedez, hauta zure sagua serieko zein kaietara konektatua dagoen."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Botoien emulazioa"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "2. Botoiaren Emulazioa"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "3. Botoiaren Emulazioa"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA txartelak konfiguratzen..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "IDE Konfiguratzen"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "ez dago partizio erabilgarririk"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Partizioak azterkatzen muntaia puntu bila"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Muntai puntuak hautatu"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Partizio taula ezin irakurri, zeharo galduta:(\n"
-"Partizio txarrak hustutzen saiatuko naiz eta DATU GUZTIAK galduko dira\n"
-"(Akatsa: %s)\n"
-"\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake-k ezin izan du partizio taula irakurrri.\n"
-"Zure kontura jarraitu!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "Ez da eguneratzea gauzatzeko erro partizioa aurkitu"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Root partizioa"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Zure sisteman zein da root (/) partizioa?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Aldaketak indarrean jar daitezen breabiatu behar duzu ordenadorea"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Hautatu formateatu nahi duzun partizioak"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Bloke txarrak txekeatu?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Partizioak formateatzen"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s fitxategia eratzen eta formateatzen"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Instalazioa burutzeko swap nahikorik ez, mesedez gehitu pixka bat"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Erabilgarri dauden paketeak bilatzen"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Eguneratu beharreko paketeak bilatzen"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Zure sistemak ez du leku nahikorik instalaziorako edo eguneratzerako (%d > %"
-"d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Osoa (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimoa (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Gomendatua (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Norberarena"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Disketetik zamatu"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Disketetik zamatzen"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Pakete aukeraketa"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "Sartu pakete aukeraketa daukan diskete bat"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Floppy-an gorde"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Aukeraturiko neurria leku eskuragarria baino handiagoa da"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Beheko zerrendako CD guztiak badituzu, Ados klikatu.\n"
-"Ez badituzu, Etsi klikatu.\n"
-"Ez duzuna ezaba dezakezu, eta gero Ados klikatu."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom etiketan %s"
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"%s paketea instalatzen\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Postinstalazioaren konfigurazioa"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Mesedez, sartu Eguneratze Moduluen disketea %s unitatean"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Enkriptaziorako softwarea lor dezakezu.\n"
-"\n"
-"KASU:\n"
-"\n"
-"Soft hau erabiltzeko eskakizun desberdinak indarrean daudenez,legedi\n"
-"ezberdinak, beseroak edo/eta sofwarearen erabiltzaileakbere jurizdikzioko\n"
-"legedian oinarritutako erabilpenaz jabetubehar\n"
-"da, eta horren arabera erabili.\n"
-"\n"
-"Honezgain bezeroak edo/eta erabiltzaileak bere jurizdikzioaren legeaez "
-"urratzearekin\n"
-"kontua izan behar du. Lege hauek urratuz gero\n"
-"larriki zigortua izan\n"
-"zaitezke.\n"
-"\n"
-"Inolaz ere, Mandrakesoft ez eta bere langileak eta/edo hornitzaileak, "
-"ezdute\n"
-"inolako erantzunkizunik onartuko edozen dela kaltea (mozkinen galera,\n"
-"enpresaren etetea,datu komertzialen galeraeta\n"
-"bestelako diru galerak, eta egon daitezkeen indemnizazio ordain enerantzuna "
-"epaiek\n"
-"erabakiz gero) software hau eduki edo erabiltzeagaitik\n"
-"edo soilik kargatzeagatik. Bezeroak edo/eta langileak akordio\n"
-"honen berri izan dutela onartzen dute.\n"
-"\n"
-"\n"
-"Akordio honetaz galderarik izanez gero jo honengana:\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Hautatu paketeak lortzeko erabiliko duzun mirror-a"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Mirror-arekin kontaktazen eskuragai dauden pakete zerrenda lortzeko"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Mesedea hauta instalatu nahi dituzun paketeak."
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Zein da zure ordu eremua?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "Hardware ordularia GTMra egokituta"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Denbora sinkronizazio automatikoa (NTP erabiliz)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "NTP Zerbitzaria"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Urrutiko CUPS zerbitzaria"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Irarkolarik ez"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Laburpena"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Sagua"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Ordu-eremua"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Irarkola"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDAN txarela"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Soinu txartela"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TB txartela"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Bertako fitxategiak"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "root-aren pasahitza ezarri"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Pasahitzik ez"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Pasahitza sinpleegia da (gutxienez %d karaktere izan behar ditu)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Egiaztapena"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "LDAP autentifikazioa"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP dn Oinarria"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "LDAP Zerbitzaria"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "NIS Autentifikazioa"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS Domeinua"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS Zerbitzaria:"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Norberaren disko abiarazleaz (bootdisk) Linux-an sar zintezke abiarazle\n"
-"arrunta erabili ordez. Hau batez ere balio du zure sisteman SILOrik ezarri\n"
-"nahi ez duzunerako edo beste sistema batek SILOa ezabatzen duenerako edo "
-"zure\n"
-"hardware konfigurazioarekin SILO bat ez daterrenerako. Disko abiarazleak "
-"ere\n"
-"Mandrakeren erreskate imaginaren ordezkoarena egin lezake, eta horrela "
-"sistema\n"
-"porrotetatik berreskura dezake. Zure sistemarako disko abiarazlerik egin "
-"nahi baduzu \"Ados\" klikatu."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Lehenengo diskete unitatea"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Bigarren diskete unitatea"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Ahaztu"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Norberaren disko abiarazleaz (bootdisk) Linux-an sar zintezke abiarazle\n"
-"arrunta erabili ordez. Hau batez ere balio du zure sisteman LILOrik ezarri\n"
-"nahi ez duzunerako edo beste sistema batek LILOa (edo grub) ezabatzen "
-"duenerako edo zure\n"
-"hardware konfigurazioarekin LILO bat ez daterrenerako. Disko abiarazleak "
-"ere\n"
-"Mandrakeren erreskate imaginaren ordezkoarena egin lezake, eta horrela "
-"sistema\n"
-"porrotetatik berreskura dezake. Zure sistemarako disko abiarazlerik egin "
-"nahi duzu?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Parkatu, ez dago disko unitate erabilgarririk"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Hautatu disko abiarazlea egiteko erabiliko den unitatea"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "%s-n diskoa sartu"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Disko abiarazlea eraikitzen"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Abiarazlea prestatzen"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Dirudienez makina ezezaguna edo oso zaharra\n"
-"daukazu, yaboot abiarazlea ez da zurean ibiliko.\n"
-"Instalazioak jarraituko du, baino BootX\n"
-"erabili beharko duzu zure makina abiatzeko."
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "aboot erabili nahi duzu?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"aboot instalatzerakoan errorea, \n"
-"indarrez ezarri instalazioa nahiz eta lehen partizioa urratzeko arriskua "
-"egon?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Instalatu bootloader-ra"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "abiarazlearen instalazioak porrot egin du. Errore hau izan da:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Gutxi"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Ertaina"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Handia"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Hautatu segurtasun neurria"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "%s-n disko hutsa sartu"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Berez instalatzeko disketea prestatzen"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Zenbait hurrats ez dira burutu.\n"
-"\n"
-"Benetan irten nahi duzu?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Zorionak, instalazioa osotu duzu.\n"
-"Abiarazlea (boot media) kendu eta return sakatu berrabiatzeko.\n"
-"\n"
-"Mandrake Linux honentzako beharrezko litzatezken konpoketetaz jabetzeko,\n"
-"http://www.mandrakelinux.com/-n dauden Erratak begiratu.\n"
-"\n"
-"Systemaren post instalaziozko konfiguraziorako beharrezkoa den informazioa\n"
-"Mandrake Linux Erabiltzailearen Gida Ofizialean dagoen instalazio kapitulura "
-"jo."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Berez instalatzeko disketea prestatu"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Nahi izanez gero autoinstall guztiz automatikoa izan daiteke.\n"
-"Horrela izatekotan disko zurruna bere gain hartudo du!!\n"
-"(beste kutxa bateko instalazioaz ari gara).\n"
-"\n"
-"Instalazioa berriz abiariazi nahi zenezake.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automatikoa"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Berabiatu"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Pakete hautapena gorde"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux-ren %s instalazioa"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> elementuen artean  | <Space> hautatzeko | <F12> hurrengo "
-"pantaila "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu galduta"
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "Hautatu akzioa"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Aurreratua"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Mesedez itxaron"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Zabaldu adarrak"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Batu adarrak"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Toggle between flat and group sorted"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Anbiguitatea (%s), zehatzago izan\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Aukera okerra, saia zaitez berriro\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (jatorrizkoa %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Zure aukera? (jatorrizkoa %s"
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Zure aukera? (jatorrizko % sar `none' ezer denean"
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Txekoa (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Germaniarra"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Hegoko Euskalduna edo Espaniarra"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Finlandarra"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Iparreko Euskalduna edo Frantziarra"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norbegiarra"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Polonesa"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Errusiarra"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Suediarra"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Erresuma Batukoa"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "Estatu Batuetakoa"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Albaniarra"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armeniarra (zaharra)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armeniarra (teklatuzkoa)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armeniarra (fonetikoa)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjan-era (latinoa)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belgikarra"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulgariarra"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazildarra"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Bielorrusiarra"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Suitzarra (Germaniarra)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Suitzarra (Frantseza)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Txekoa (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Alemana (alferrikako teklarik ez)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Daniarra"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norbegiarra)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estoniarra"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiarra (\"Errusiarra\")"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiarra (\"Latindarra\")"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "grekoa"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Hungariarra"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Kroata"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Israeldarra"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Israeldarra (fonetikoa)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iraniarra"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islandiarra"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Italiarra"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japoniarra 106 tekla"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Korearra"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Amerika latindarra"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituaniako AZERTY (zaharra)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituaniako AZERTY (berria)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituaniako \"lerro zenbakia\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituaniako \"fonetikoa\"QWERTY"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "Kokapena"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Mazedoniarra"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Holandarra"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Poloniarra (QWERTY)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Poloniarra (QWERTZ)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugaldarra"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Kanadakoa (Quebec)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Errumaniarra (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Errumaniarra (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Errusiarra (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Eslobeniarra"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslobakiarra (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Eslobakiarra (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaidjan-era (zirilikoa)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Tailandarra"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Tailandarra"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turkiarra (ohiko \"F\" modeloa"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turkiarra (modernoa \"Q\" modeloa"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukraniarra"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "Estatu Batuetakoa (nazioartekoa)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnameko \"lerro zenbakia\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Iugoslabiarra (latinoa/kyrilikoa)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Muntai zirkularrak %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Lehenengo bolumen logikoak ezabatu\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Sagua"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Ohiko sagua, PS2 pilotaduna"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "botoi 1"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Generikoa"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Pilotatxoa"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "seriekoa"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Ohiko sagua, 2 botoiduna"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Ohiko sagua, 3 botoiduna"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Segidakoa"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serial, zaharra C7 motakoa)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "bus sagua"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 botoi"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 botoi"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "batez"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Sagurik ez"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Mesedez testatu sagua"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Sagua pizteko,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "GURPILA BIRA ARAZI!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Finlandiarra"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Hurrengoa ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Aurrekoa"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Zuzena da?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Internetera konektatu"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Gehienetan adsl konektatzeko pppoe da.\n"
-"Zenbaitzuk pptp erabiltzen dute, eta gutxi batzuk dhcp.\n"
-"Ez badakizu, hauta 'pppoe erabili'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "dhcp erabili"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pppoe erabili"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pptp erabili"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Zein dhcp bezero erabili nahi duzu?\n"
-"Jatorrizkoa dhcpcd da"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ez duzu Ethernet egokitzailerik zure sisteman.Ezin dut konexioa egokitu."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Hautatu sareko interfacea"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Mesedez hauta interneterako erabili nahi duzun sare-egokitzailea."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ez da sare txartelik aurkitu"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Sarea konfiguratzen"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Ostalariaren izena sartu mesedez.\n"
-"Zenbait DHCP zerbitzariek ostalariaren izena behar dute.\n"
-"Ostalariaren izena guztiz osatutakoa behar du izan,\n"
-"hnakoa bezala ``nirekutxa.niregela.nirelantegia.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Ostalariaren izena"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Sare Konfiguraziorako Aztia"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Kanpoko ISDN modema"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Barneko ISDAN txarela"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Zure ISDN konexioa zein motatakoa da?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Zein RDSI ezarpen duzu nahiago?\n"
-"\n"
-"* Ezarpen zaharrak isdn4net erabiltzen du. Tresna indartsuak\n"
-"  erabiltzen ditu, baino ezartzea latza izan daiteke hasberri\n"
-"  batentzako, eta ez da estandarra.\n"
-"\n"
-"* Ezarpen berria ulerterrazagoa da, estandarragoa, baino tresna\n"
-"  gutxiago ditu.\n"
-"\n"
-"Ezarpen arina gomendatzen dugu.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Ezarpen berria (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Ezarpen zaharra (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN Konfigurazioa"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Ornitzailea hautatu.\n"
-"Zerrendan ezbalego, hauta Unlisted"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Abiatze Protokoloa"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Munduko beste guztia"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Eropatik at \n"
-" ez D-Channel-ik (leased lines)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Zein protokolo erabili nahi duzu?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Zein da zure txartel mota?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Ez dakit"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"ISA txartel baduzu, hurrengo pantailan agertzen diren balioak egokiak izan "
-"beharko liratekez.\n"
-"\n"
-"PCMCIA txartela baduzu, txartelaren irq eta io-a jakin behar duzu.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Eten"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Jarraitu"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Zein da zure ISDN txartela?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"ISDN PCI txartela aurkitu dut, baina ez dakit zein motakoa. Mesedez hauta "
-"PCI txartel mota hurrengo pantailan."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Ez dut ISDN PCI txartelik aurkitu. Mesedez hauta hurrengo pantailakoren bat."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Mesedez hauta serieko zein kaira dago zure modema konektatua."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Markatze aukerak"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Konexioaren izena"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Telefono zenbakia"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Scipt-ean oinarritua"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Terminalean oinarritua"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Domeinuaren izena"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Lehenengo DNS zerbitzaria (aukerakoa)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Bigarren DNS zerbitzaria (aukerakoa)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Deskonektatu edo konexioa berkonfiguratu zenzake."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Internet konexioa berregokitu zenezake."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Interneten zaude."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Internetera konektatu edo konexioa berregokitu zenezake."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Internetera konektatu gabe zabiltza."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Internetera konektatu"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Irteneteko konexioa eten"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Konfiguratu sare konexioa (Bertoko sarea edo Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Internet konexioa  & konfigurazioa"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Orain %s lotura ezarriko dugu."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Orain %s lotura ezarriko dugu.\n"
-"\n"
-"\n"
-"Sakatu Ados hasteko."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Sare Konfigurazioa"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Sare instalazioa egiten ari zarenez, zure sarea dagoeneko konfiguraturik "
-"da.\n"
-"Ados sakatu konfigurazioa mantentzeko, edo etsi Internet eta sarerako "
-"konexioa ezagutarazteko.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Ongi etorri sare konfiguraziorako aztira\n"
-"\n"
-"Zure Internet/Sare lotura konfiguratzen ari zara.\n"
-"Autodetekziorik erabili nahi ez baduzu, hautua ezaba egizu.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Hautatu konfiguratu beharreko profila"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Erabili autodetekzioa"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Unitateak ezabatzen..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Modem konexio arrunta"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "%s-n kaia kausitua"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN konexioa"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "kausitua %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ADSL lotura"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "kausitua: %s interfazea"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Kable konexioa"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "Kable bidezko lotura detektatu da"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "LAN konexioa"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "ethernet txartela(k) kausituak"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Hautatu ezarri nahi duzun lotura"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Internetera lotzeko bide ugari ezarri duzu.\n"
-"Hautatu erabili nahi duzuna.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Internetera lotura"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Abiatzerakoan zure konexioa abiarazi nahi duzu?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Sare Konfigurazioa"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Arazoa sarea abiaraztean: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Zorionak. interneten zaude.\n"
-"\n"
-"Konfigurazioa zure sisteman egokituko da.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr "Ondoren, X berrabiarazi, problemarik egon ez daitean."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"KASU: Tresna hau aurretik Interneten erabiltzeko egokita duzu.\n"
-"Ados sakatu tresna dagoen moduan mantentzeko.\n"
-"Aldaketak eginez gero konfigurazioa aldatuko da."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Makina honetarako IP konfigurazioa ezarri mesedez.\n"
-"Item bakoitze zenbaki eta puntuz sartu behar da IPan bezala\n"
-"(adibidez, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "% sarerako tresna konfiguratzen"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (%s gidaria)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP helbidea"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Maskara (Netmask)"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "IP automatikoa"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP helbidea hurrengo formatuan 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Ostalariaren izena sartu mesedez.\n"
-"Zure ostalariaren izena guztiz gaitua behar du izan,\n"
-"honakoa bezala ``nirekutxa.niregela.nirelantegia.com''.\n"
-"Atariaren (gateway) IP helbidea sar dezakezu horrelakorik baduzu"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS zerbitzaria"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Ataria (gateway)"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Atariko tresna (gateway device)"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Proxien konfigurazioa"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Proxy-a honelakoa http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Proxy-a honelakoa ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Interneten konfigurazioa"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Internetera konektatze saiorik egin nahi orain?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Konexioa frogatzen..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Internetera konektatuta zaude."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Segurtasunagatik, orain deskonektatuko da."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Internetera konektatu ezinik.\n"
-"Egokitu konexioa."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Konexioaren Konfigurazioa"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Mesedez beheko eremua bete edo berrikusi"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "Txartelaren IRQ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Txartelaren memoria (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "Txartelaren IO"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "Txartelaren IO_0"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "Txartelaren IO_1"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Zure telefono zenbakia"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Ornitzailearen izena (adb: ornitzaile.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Ornitzailearen telefono zenbakia"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "Ornitzailearen dns 1 (aukerakoa)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "Ornitzailearen dns 2 (aukerakoa)"
-
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "Aukeratu teklatua"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Markatze modua"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Loturaren abiadura"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Lotura Denbora "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Kontuaren login-a (erabiltzailearen izena)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Kontuaren Pasahitza"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Plataforma honek ez du onartzen hedatutako(extended) partiziorik"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Partizio taulan erabil ez dezakedan zuloa duzu.\n"
-"Soluzio bakarra da lehen mailako partizioak mugitzea eta zuloa hedatutako"
-"(extended) partizioen parean uztea"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "%s fitxategitik berreskuratzen: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Backup fitxategi kaxkarra"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "%s fitxategia idazterakoan errorea"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "beharrezko"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "garrantzitzu"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "oso ederra"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "ederra"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "litekeena"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Inprimatu, Ez jarri ilaran"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Bertoko irarkola"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Urrutiko irarkola"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Urrutiko CUPS zerbitzaria"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Urrutiko lpd zerbitzaria"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Sareko irarkola (socket)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Inprimatze zerbitzaria"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Irarkolaren Tresna URI"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(%s modulua)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Irarkolaren konexioa hautatu"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Zelan dago irarkola konektatua?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"Urrutiko CUPS zerbitzariaz, ez duzu hemen inolako irarkola konfiguraziorik\n"
-"egin behar; irarkolak automatikoki detektatuko dira.\n"
-"Bestelako zerbitzarikik baduzu beste sare batetan, CUPS zerbitzariaren\n"
-"IP helbidea eman beharko duzu, eta aukeran, kai zenbakia."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Batez"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Hautatu jatorrizko erabiltzailea:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Itxi"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "Urrutiko irarkola"
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP helbidea hurrengo formatuan 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Kai zenbakia, zenbaki behar du izan."
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "Bertoko irarkola"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "CUPS zerbitzariaren IP"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Kaia"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Abiaratze konfigurazioa"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Unitateak ezabatzen..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Kaiak saiatzen"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Irarkola, \"%s\" modelokoa, hurrengo tokian aurkitua:"
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Bertoko Irarkolaren Tresna"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Zein tresnetara konektatzen da zure irarkola \n"
-"(kasu! /dev/lp0 eta LPT1 gauza bera dira:)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Irarkolaren Tresna"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "Gailu/fitxategi izena falta da!"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "CUPSen gidari databasea irakurtzen..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Urrutiko lpd Irarkolaren Aukerak"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Urritiko lpt irarkola isatsa erabiltzeko, irarkola zerbitzariaren ostalari "
-"izena\n"
-"eta isatsaren izena eman behar duzu.\n"
-"Lanak bertatik inprimatu daitezen."
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "Urrutiko ostalari izena"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Urrutiko irarkola"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "Urruneko ostalari izena falta da!"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Urruneko ostalari izena falta da!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Irarkolaren Aukerak"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"SMB irarkola batean inprimatzekotan SMB ostalari izena\n"
-"eman behar duzu (Kasu! TCP/IP ostalari izenaren ezberdina izan daiteke!) \n"
-"eta agian inprimatze zerbitzariaren IP helbidea, honezgain erabili nahi "
-"duzun\n"
-"irarkolaren banatze izena, erabiltzailearen izena,\n"
-"pasahitza eta lantaldearen informazioa."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "SMB zerbitzariaren ostalaria"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "SMB zerbitzariaren IP"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Banatze izena"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Lantaldea"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Zerbitzaria izena edo zerbitzariaren IP eman behar da!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "NetWare Irarkolen Aukerak"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"NetWare irarkola batean inprimatzeko, honako datu hauek behar dituzu:\n"
-"NetWare inprimatze zerbitzariaren izena (Kasu! TCI/IParen bestelakoa izan "
-"daiteke!)\n"
-", erabili nahi duzun irarkolaren izena eta beharrezko daitezken\n"
-"erabiltzaile izena eta pasahitza."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Inprimatze zerbitzaria"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Inprimatze isatsaren izena"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "NCP zerbitzari izena falta da!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "NCP ilara izena falta da!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Socket-eko Inprimagailu Aukerak"
-
-#: ../../printerdrake.pm_.c:528
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Socket irarkolan inprimitzeko, irarkolaren ostalari izena\n"
-"eta aukeran, kaiaren zenbakia."
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "Irarkolaren ostalari izena"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "Inprimagailuaren ostalari izena falta da!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Irarkolaren Tresna URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Inprimagailu guztiek behar dute izena (adibidez lp).\n"
-"Azalpen eta Kokapen eremuak betetzea ez da beharrezkoa\n"
-"Erabiltzailearentzako aipamenak dira."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Irarkolaren izena"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Deskripzioa"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Kokapena"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "CUPSen gidari databasea irakurtzen..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "Inprimagailu eredu aukeraketa"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "Zein inprimagailu eredu daukazu?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Interneten konfigurazioa"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Interneten konfigurazioa"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, fuzzy, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Portua zenbaki osoa izan behar da!"
-
-#: ../../printerdrake.pm_.c:1094
-#, fuzzy, c-format
-msgid "Option %s must be a number!"
-msgstr "Portua zenbaki osoa izan behar da!"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Froga orria inprimatu nahi duzu?"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "Kaiak saiatzen"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "Irarkola"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standard"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Test orria(k) inprimatzen ..."
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "Test orria(k) inprimatzen ..."
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Test orria(k) inprimatzen ..."
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Inprimatze deabrura bialdu da/dira test orria/k.\n"
-"Irarkola lanean hasteko denboratxoa behar lezake.\n"
-"Inprimatze egoera:\n"
-"%s\n"
-"\n"
-"Egokiro dabil?"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Inprimatze deabrura bialdu da/dira test orria/k.\n"
-"Irarkola lanean hasteko denboratxoa behar lezake.\n"
-"Egokiro dabil?"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Irarkolarik ez"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Sarea beheratzen"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "Inprimagailu aukerak"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Interneten konfigurazioa"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Inprimagailu izenak hizkiak, zenbakiak eta azpikomarra soilik izan behar "
-"lituzke"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "Irarkolarik ez"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "CUPSen gidari databasea irakurtzen..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Konfiguratu irarkola"
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Lotura abiatzen..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Konfiguratu sare lana"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitorea konfiguratu gabe"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Sarea konfiguratzen"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Zein inprimaketa sistema erabili nahi duzu?"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Handia"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoidea"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Zein inprimaketa sistema erabili nahi duzu?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Aukeratu Inprimagailu %s Spoolerra"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Zein inprimaketa sistema (spooler) erabili nahi duzu?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfiguratu irarkola"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Inprimagailu aukerak"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "Inprimagailua ezarri nahi duzu?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Arrunta"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Jatorrizkoa)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Urrutiko CUPS zerbitzaria"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "Urrutiko CUPS zerbitzaria"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Inprimagailua gehitu"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Konfigurazioa frogatu nahi duzu?"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Interneten konfigurazioa"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Internetera lotura"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Inprimagailu eredu aukeraketa"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "Test orria(k) inprimatzen ..."
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "Urrutiko irarkola"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Urrutiko irarkola"
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Sarea berrabiarazi nahi duzu?"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Urrutiko irarkola"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy ezarpena"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Ongi etorri proxy ezarketa tresnara.\n"
-"\n"
-"Hemen, zure http eta ftp proxiak ezartzeko aukera izango duzu\n"
-"login eta pasahitzarekin edo gabe.\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Mesedez bete http proxy informazioak.\n"
-"Utzi hutsik http proxyrik nahi ez baduzu."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "portua"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url-a 'http:'-az hasi beharko litzateke"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Portu zatia zenbakizkoa izan beharko litzateke"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Bete ftp proxiari buruzko informazioak\n"
-"Utzi hutsik ez baduzu ftp proxirik nahi"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url-a 'ftp:'-az hasi beharko litzateke"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Sartu proxiaren erabiltzaile eta pasahitza, beharrezkoa bada.\n"
-"Utzi hutsik ez baduzu erabiltzaile/pasahitza nahi"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "pasahitza"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "berridatzi pasahitza"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Pasahitzak ez datoz bat. Saiatu berriro!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Formateatutako RAID md%d-i ezin partiziorik gehitu"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Fitxategia ezin idatz: %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid-ek huts egin du"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid-ek huts egin du (agian raidtools-ak galdu egin dira?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ez dago partizio nahikorik %d RAID mailarako\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Jaurti ALSA (Advanced Linux Sound Architecture) soinu sistema"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, aldiroko komando programatzailea"
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd bateriaren egoera aztertzeko da eta syslog-en bitartez lortzeko.\n"
-"Bateria gutxi dagoenean makina itzaltzeko erabil daiteke ere."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"atindarrean dagoenean at komandoan esan bezala, komandoak abiarazten ditu,\n"
-"eta batch komandoak abiarazten ditu karga gutxi dagoenean."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron, erabiltzaileak hautatutako programak, finkatutako orduan abiarazten "
-"duen \n"
-"UNIX programa standarra da. vixie cron ezaugarriak gehitzen dituoinarriko\n"
-"UNIX cron-era, segurtasun hobea eta konfigurazio tresna ahalmentsuak."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM-k sagua gehitzen du testuan oinarritutako Linux aplikazioae, bide\n"
-"Midnight Commander. Honezgain saguan oinarritutako konsola eta ebaki-eta-"
-"itsatsi operazioak,\n"
-"eta konsolako pop-up menuentzako soportea ematen du."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrakek hardware froga egiten du, eta hardware berri/aldatua\n"
-"ezartzeko aukera emanten du."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache World Wide Web zerbitzaria da. HTML eta CGI fitxategiak "
-"zerbitzatzeko\n"
-"erabilgarri."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superzerbitzariaren deabrua (inetd deitua) behar izanez gero\n"
-"bestelako internet zerbitzuak abiaraz lezake. Zerbitzuak "
-"abiaratzearenerantzule\n"
-"hoien artean telnet, ftp, rsh, eta rlogin. inetd itzaltzeakbere "
-"erantzunkizun\n"
-"diren zerbitzu guztiak etetzen ditu."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Jaurti Linux Kernel 2.2 seriearentzako pakete iragazkia, zure\n"
-"makina sareko erasoengatik babestuko duen suhesia ezartzeko."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Pakete hau teklatuaren mapa kargatzen du \n"
-"/etc/sysconfig/keyboard helbidean azaltzen den arabera. kbdconfig utilitatea "
-"erabiliaz hauta genezake.\n"
-"Makina gehienentzako ezinbestekoa da."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Berreratze automatikoa erner header-arena /boot-en\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Hardware detekzio eta ezarpen automatikoa abiapenean."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd irarkolaren deabrua da, beharrezko lpr-ek egokiro lan egin dezan. "
-"Irarkolara\n"
-"doazen lanak kudeatzen duen zerbitzaria da."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Alegiazko Zerbitzaria, errendimendu haundiko eta erabilgarritasun\n"
-"haundiko zerbitzaria eraikitzeko erabilia."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) Domain Name Server-a (DNS) da, honek ostalarien izenak\n"
-"IP helbidetan bihurtzen ditu."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Network File System-ak (NFS) muntatu eta desmontatzen ditu, SMB (Lan\n"
-"Manager/Windows), eta NCP (NetWare) muntai puntuak."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Abiaratzekoan hasteko dauden sare interfazeak aktibatu/desaktibatu\n"
-"egiten ditu."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS, TCP/IP sareetan fitxategiak banatzeko protokoloa da.\n"
-"Zerbitzu honek, NFS zerbitzariaren funtzioa ematen du,\n"
-"/etc/exports fitxategiak konfiguratua."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS, TCP/IP sareetan fitxategiak banatzeko protokoloa da.\n"
-"Zerbitzu honek, NFS fitxategi-giltza funtzioa ematen du."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "OKI 4w eta wininprimagailu baterabarriei euskarria eman."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA soportea, ethernet eta modemak erabiltzeko izan ohi\n"
-"da. Ez da hasiko ez badago konfiguratua, beraz gomendagarria da\n"
-"beharrezko ez duten maniketan instalatzea."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper-ek RPC konekzioak kudeatzen ditu, NFS eta NIS protokoloak\n"
-"erabiltzen dutena. Portmap zerbitzaria erabili beharda\n"
-"RPC mekanismoa erabiltzen duten zerbitzarietan."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix Mail Transport Agentea da, makinen arteko postari\n"
-"lana egiten duen porgrama da."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Sistemaren entropia putzua gorde eta berreaikitzen du, kalitatezko zorizko "
-"zenbakien\n"
-"sorrerarako."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Egokitu raw gailuak bloke gailuei (hala nola unitate zurrun\n"
-"partizioak), Oracle bezalako aplikazioekin erabiltzeko"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed deabruak IP router-aren IP taula eguneratzen du\n"
-"RIP protokoloa erabiliaz. RIP sare txikietan erabili ohi da, sare "
-"handientzako\n"
-"routing protokolo konplexuagoak behar dira."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Rstat protokoloak sareko edozein makinaren\n"
-"funtzionamendua neur lezake."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Rusers protokoloak sareko edozein makina darabilen\n"
-"erabiltzaileak identifikatu lezake."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Rwho protokoloak kanpoko erabiltzaileei, rwho deabrua erabiltzen dutenen\n"
-"zerrenda lortzen du (finger-en antzekoa)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Jaurtiki soinu sistema zure makinan"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog-a deabruek erabiltzen dute sistemen log fitxategietan\n"
-"log mezuak uzteko. Komenigarria da beti indarrean izatea."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Zamatu zure usb gailuentzako gidariak."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "X-Font Zerbitzaria abiatzen du (ezinbestekoa da XFree erabiltzeko)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Hautatu zein zerbitzu hasiko den automatikoki abiatzerakoan"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "Irarkola"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "Sistema modua"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Urrutiko lpd Irarkolaren Aukerak"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Zerbitzari, Datubase"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "tresna (device)"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "abian"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "etanda"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Yaboot"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "%s paketea instalatzen"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Partizio taula ezin irakurri, zeharo galduta:(\n"
-"Partizio txarrak hustutzen saiatuko naiz"
-
-#: ../../standalone/drakautoinst_.c:44
-#, fuzzy
-msgid "Error!"
-msgstr "Errorea"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Postinstalazioaren konfigurazioa"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Abiaratze konfigurazioa"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Zorionak!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Internet konexio banatua"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internet konexioare banaketa gaitua"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internet konexiaren banaketaren egokierak eginda.\n"
-"Erabilgarri dago.\n"
-"\n"
-"Zer egin nahi duzu?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "ezgaitu"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "etsi"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "berregokitu"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Zerbitzariak ezereztatzen..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Internet konexioaren banaketa ezgaitua."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internet konexioaren banaketa ezgaitua"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internet konexiaren banaketaren egokierak eginda.\n"
-"Orain ez dabil.\n"
-"\n"
-"Zer egin nahi duzu?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "gaitu"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Zerbitzariak gaitzen..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Internet konexioaren banaketa gaitua."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Internet konexioa banatzekotan zara.\n"
-"Konputagailuak Internet konexioa banatu dezake, horrela beste "
-"batzuekkonputagailu honen konexioa erabil dezakete.\n"
-"\n"
-"Oharra: Sare Egokitzaile berezia beharko duzu bertako sarea eraikitzeko."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (using module %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Ez duzu sare-egokitzailerik zure sisteman!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ez duzu konfiguratutako Ethernet egokitzailerik zure sisteman. Mesedez "
-"harwarearen konfigurazio tresna erabili."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Sarearen interfazea"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Konfiguratutako sare-egokitzaile bakarra duzu:\n"
-"\n"
-"%s\n"
-"\n"
-"Zure LANa egokitzaile horrekin konfiguratuko dut."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Mesedez hauta zein sare-egokitzaile izango duzuzure LANerako."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr "Adi, sare egokitzailea dagoeneko konfiguratua. Berkonfiguratuko dut."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Litekeen LAN helbidearen konfliktoa oraingo %s-ren konfigurazioan!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Firewall konfigurazioa aurkitua!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Kasu! Esistitzen den firewall konfigurazioa aurkitu da. Agian\n"
-"eskuzko finkapena egin beharko duzu instalazioa eta gero."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Konfiguratzen..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Konfigurazioko script-ak, softwarea instalatzen, zerbitzariak abiarazten..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Arazoa %s instalatzean"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Dena egokiturik.\n"
-"Internet konexioa banatu zenezake, DHCP erabiliaz."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Internet konexiaren banaketaren egokierak eginda, baina orain ez dabil."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Internet konexiaren banaketaren egokierak eginda. Erabilgarri dago."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Internet konexioaren banaketa ez da inoiz konfiguratu."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Internet konexioaren banaketaren konfigurazioa"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Internet konexio banatua!\n"
-"\n"
-"%s\n"
-"\n"
-"Konfiguratun saka egokitzapenak egiteko."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Sare Konfigurazioa (%d egokitzaileak)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profila: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Ezaba profila..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Ezabatzeko profila:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Profil berria..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Ostalari-izena:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Internet lotura"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Mota:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Ataria (gateway):"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Interface:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Konektaturik"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Konektatu gabe"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Konektatu..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Eten..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Lotura abiatzen..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Konexioa ixten..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Konexioa itxita.\n"
-"Eskuz ireki root-en:\n"
-"/etc/sysconfig/network-scripts/net_cnx_down"
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Sistema deskonektatuta."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Konfiguratu Internet Lotura..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "LAN konfigurazioa"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Gidaria"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protokolo"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "State"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Konfiguratu bertoko sarea LAN..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Ezarri"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Zain egon...konfigurazioa ezartzen"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Ez daukazu interfaze batere ezarrita.\n"
-"Ezarri itzazu 'Ezarri' gainean sakatuz"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "LAN konfigurazioa"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Egokitzaile %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Abiatze Protokoloa"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Abiatzerakoan hasia"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP bezeroa"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "activate now"
-msgstr "aktibatu"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "desactivate now"
-msgstr "aktibatu"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Ez daukazu interneterako loturarik.\n"
-"Sortu ezazu bat 'Ezarri' gainean sakatuz"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Internet konexioaren konfigurazioa"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Internet konexioaren konfigurazioa"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Konexioaren mota: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parametroak"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Ethernet txartela"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP bezeroa"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Ongi etorri Crackers-era"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Txiroa"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoidea"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Kontuz erabili beharreko maila. Sistema erabilterraza egiten du,\n"
-"baina oso sentsiblea: internetez lotutako makinetan ez da erabili behar.\n"
-"Pasahitz bidezko sarrerarik ez baitauka."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Pasahitzak indarrean, baina sarean sartutako konputagailu bezala ez "
-"erabiltzea gomendatzen da."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Hobekuntza gutxi segurtasun maila honetarako, batez ere segurtasun\n"
-"mezu eta saio gehiago."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Internetera kliente modura lotutako makinentzeko gomendatutako segurtasun "
-"maila\n"
-"estandarra. Ez du segurtasun saiorik egiten. "
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Segurtasun maila honekin, sistema zerbitzari modura erabilzenezake.\n"
-"Hanbat klienteen loturak onartzeko moduan den\n"
-"segurtasun maila. "
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"4. mailaren ezaugarriak, baina orain sistema guztiz hertsia.\n"
-"Segurtasun maila maximoa."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "Hautatu segurtasun neurria"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Hautatu zerbitzariarentzako aukerak"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Hautatu segurtasun neurria"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrol Zentroa"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Instalatu nahi duzun tresna hautatu"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "erabilera: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "BackSpace eta Delete bat bera console-n?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Aldatu Cd-Rom-a"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Mesedez, \"%s\" izena duen Cd-Rom-a sartu unitatean eta gero Ados "
-"sakaegizu.\n"
-"Ez baldin baduzu Etsi sakatu Cd-Rom-etiko instalazioa ezeztatzeko."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ezin da eguneratze bizia abiatu !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "ez dut aurkitu serieko_usb-rik\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Emulatu hirugarren botoia?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Firewall konfigurazioa"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Firewall konfigurazioa"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"Dagoeneko firewall ezarria duzu.\n"
-"Konfiguratun saka aldaketarik egin nahi baduzu."
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"Konfiguratun saka standarra nahi baduzu."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Hautatu hizkuntza"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Hautatu instalazio mota"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Disko zurrunaren detekzioa"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfiguratu sagua"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Aukeratu teklatua"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Segurtasuna"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Fitxategi sistemak egokitu"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Partizioak formateatu"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Aukeratu instalatu beharreko paketeak"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalatu sitema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Gehitu erabiltzailea"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfiguratu sare lana"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfiguratu zerbitzuak"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Bootdisk-a eraiki"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Instalatu bootloader-ra"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfiguratu X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Instalaziotik irten"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall configurator\n"
-"\n"
-"Mandrake Linux makinarako norberarentzako firewalla ezartzen du.\n"
-"Segurtasun handiago nahi baduzu: MandrakeSecurity Firewall distribution;\n"
-"banaketa berezikoa."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Zein zerbitzubaimendu nahi duzun galdetuko zaizu.\n"
-"Ganoraz erantzun.\n"
-"\n"
-"Behar izanez gero edozein momentutan berkonfiguratu zenezake\n"
-"zerbitzuok."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Internet osorako Web zerbitzari legez ari zara?\n"
-"Zure Web zerbitzaria makina honetarako soilik bada, ezeztz\n"
-"erantzeun zenezake.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Izen zerbitzari legez ari zara?\n"
-"Ezetz erantzun IP informazioa gorde nahi izanez gero.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Kanpotik datozen telnet loturak baimendu nahi dituzu?\n"
-"Hau izugarri arriskutsua da, aurreko pantailan azaldu dugun bezala. Guk\n"
-"irmoki gomendatzen dugu galdera honi Ezetz erantzutea eta telnet ordez\n"
-"ssh erabiltzea.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Internetetik eskuragarri dagoen FTP zerbitzari bat korritzen ari zera?\n"
-"Ala bada, irmoki gomendatzen dizugu transferentzia anonimoetarako\n"
-"soilik erabiltzea. FTP bitartez bidalitako edozein pasahitz erasotzaileek\n"
-"lapurtu dezakete, FTP-k ez duelako pasahitzak bidaltzeko enkriptaziorik "
-"erabiltzen.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Hemen posta zerbitzaria exekutatzen ari zara? Zure mezuak\n"
-"pine, mutt edo beste edozein testu-oinarridun posta bezero bitartez\n"
-"bidaltzen baduzu ziurrenik hala da. Bestela, suhesiaz babestu behar zenuke.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"POP edo IMAP zerbitzaria exekutatzen ari zara? Hau erabiliko\n"
-"litzateke makina honen bitartez jendearentzako web oinarrigabeko\n"
-"posta kontuei ostatu emateko\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Dirudienez 2.2 kernela erabiltzen ari zara. Zure sare IPa\n"
-"automatikoki ezartzen bada zure etxe edo bulegoan duzun\n"
-"konputagailu baten bitartez (dinamikoki egokitua), hau gaitu\n"
-"behar dugu. Zure kasua da?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Zure konputagailuak beste batekin denbora sinkronizatzen du?\n"
-"Gehienbat, Unix/Linux erakunde ertain-haundietan erabiltzen da hau\n"
-"sesioan sarrera eta halakoetarako denbora sinkronizatzeko. Ez bazara\n"
-"bulego haundi bateko partaide eta honi buruz ezer entzun ez baduzu\n"
-"ziurrenik ez duzu egiten."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Ezarpena amaitu da.  Aldaketa hauek diskora idatziko ditugu?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ezin ireki %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ezin ireki %s idazteko: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Zerbitzaria, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Sareko Konputagailu (bezeroa)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome Lan estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Palm edo Visor-entzako tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Lan estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Zerbitzari, Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr "Bulego programak"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio tresnak: mp3 edo midi jotzeko, nahasleak, eta abar"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Liburuak eta Linux laguntza"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE Lan estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Trenak posta, berri, web, fitxategi igorrtze eta txaterako"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Zerbitzari, Datubase"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Konfigurazioa errazteko tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Soinua"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Laguntzaileak"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentazioa"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Consola tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Interneten estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedia estazioa"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN konfigurazioa"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Idazmahi grafikoak (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "KDE idazmahi giroa"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Garatzaile"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache eta Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "CDak erreteko"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Office estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafikoentzako programak, Gimp barne."
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C eta C++ garatzeko liburutegiak, programak eta abar"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Sare Zerbitzaria"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Zerbitzari, Posta/Taldeware/Berriak"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Joku estazio"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videoa editatu eta ikusteko"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafikoak"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Denborapasa: arcade, taulakoak, estrategia..."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"posta eta berriak irakurtzeko eta bialtzeko tresnak: pine, mutt, tin... eta "
-"Amarauna arakatzeko"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Gordailuak, emuladoreak, monitoreak"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Norberaren Finantzak"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Giro grafikoa"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Protokolo desberdinetareko bezeroak, ssh barne"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Internet lotura"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Saoinua eta bideoa"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Bestelako idazmahi grafikoak"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editoreak, maskorrak, fitxategi tresnak, terminalak"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Finantzetarakoak: gnucash..."
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Jokuak"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Norberaren Informazioaren Kudeatzeileak"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD erretzaileak"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Zientzirako lanestazioa"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "ezin ireki etc/sysconfig/autologin irakurtzeko: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Sarea berrabiarazi nahi duzu?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Ados zaude?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Sarerako tresna berabiaraziko dut:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Zure %s sare tresna berrabiaraziko dut. Ados?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Bestelakorik ez badakizu, ohikoena \"/dev/hda\" da\n"
-#~ " (IDE disko nagusia) edo \"/dev/sda\" (lehen SCSI diskoa)."
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Hemen daude  hurrengo irarkola isatsak.\n"
-#~ "Zenbait gehitu edo daudenak aldatu dezakezu."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Lotura Denbora "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Hautatu jatorrizko erabiltzailea:"
-
-#~ msgid "Spooler: "
-#~ msgstr "Inprimaketa ilara:"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Frogatu sagua hemen."
-
-#~ msgid "Press next to continue."
-#~ msgstr "Sakatu hurrengoa jarraitzeko."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "Mesedez hauta hobestutako hizkuntza instalaziorako eta sistemaren "
-#~ "erabilerako"
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Gaineko lizentzian aipaturikoa onartu behar duzu instalazioarekin "
-#~ "jarraitzeko.\n"
-#~ "\n"
-#~ "\n"
-#~ "Mesedez egin klik \"Onartu\" gainean lizentziarekin ados bazaude.\n"
-#~ "\n"
-#~ "\n"
-#~ "Egin klik \"Errefusatu\" gaienan lizentziarekin ados ez bazaude. "
-#~ "Instalazioa orain duzun ezarpena aldatu gabe\n"
-#~ "amaituko da."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Hautatu zureari dagokion teklatuaren itxura goiko listan"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Gainerako hizkuntzarik nahi baduzu (instalazioaren hasieran\n"
-#~ "aukeraturikoez gain) eskuragarri izango dituzu instalazioaren ondoren, "
-#~ "mesedez aukeratu\n"
-#~ "itzazu gaineko zerrendan. Guztiak aukeratu nahi badituzu, aukeratu "
-#~ "\"Guztiak\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Hauta:\n"
-#~ "\n"
-#~ "  - Norberarena: GNU/Linux ezagutzen baduzu. Gero, makinaren erabiera "
-#~ "nagusia hautatzeko aukera izango duzu. Beherago ikus azalpenak.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Aditua: GNU/Linux sakonki ezagutuz gero, eta oso instalazio berezia\n"
-#~ "egin nahi baduzu,instalazio modu hau zuretzako da. Zure sistemaren\n"
-#~ "erabilera honela egin beharko duzu \"Norberarena\".\n"
-#~ "    Baina mesedez, EGITEN ZABILTZANA ZERTAN DATZAN EZ BADAKIZU, EZ HAUTA "
-#~ "AUKERA HAU!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Makinaren erabilera desberdinak hauta zenezake. Aukerak:\n"
-#~ "\n"
-#~ "* Arrunta: egunerako erabilerarako (bulego lana, irudiketa, eta abar). "
-#~ "Ez\n"
-#~ "  duzu konplikaziorik edo garatzale lanerako tresnarik edukiko.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Garatzaile: sofwarearen garapenerako erabiliko baduzu makina. Orduan "
-#~ "software\n"
-#~ "  bilduma osoa izango duzu konpilatu, debug eta jatorrizko\n"
-#~ "kodearen formateaoa, edo software paketeak eratzeko.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Zerbitzari: hauta hau zure Mandrake Linux instalazioa zerbitzari modura "
-#~ "erabiltzeko. Hau da fitxategi zerbitzari  (NFS edo SMB),  irarkola "
-#~ "zerbitzari (Unix edo Microsoft bezalako inpresioa), egiaztatze zerbitzari "
-#~ "(NIS), datubase zerbitzari eta abar.  Hemen, ez duzu gimmicks-k izango "
-#~ "(KDE, GNOME...)."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Orain instalatu edo eguneratu nahi duzun paketa taldea\n"
-#~ "hauta dezakezu.\n"
-#~ "\n"
-#~ "DrakX-ek instalaziorako tokirik baduzu begiratuko du. Ez baduzu,\n"
-#~ "ohartuko dizu. Aurrera jarraitu nahi baduzu, hautatutakoen artean "
-#~ "instalazioak\n"
-#~ "garrantzi handiagoko paketeak hobestuko ditu eta leku faltan garrantzi\n"
-#~ "gutxiagokoak bastertuko ditu.Zerrendaren behealdeko\n"
-#~ "\"Banan banako pakete hautaketa\" erabil zenezake; kasu honetan\n"
-#~ "1000 baino gehiagoko pakete zerrendan murgildu beharko zara..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Orain, banan-banan aukeratu ditzakezu instalatu nahi dituzun\n"
-#~ "paketeak.\n"
-#~ "\n"
-#~ "\n"
-#~ "Zuhaitza zabaldu edo estutu dezakezu pakete leihoaren ezker ertzeko "
-#~ "aukeretan\n"
-#~ "klik eginez\n"
-#~ "\n"
-#~ "\n"
-#~ "Paketeak alfabetikoki antolaturik ikustea nahiago baduzu, egin ezazu "
-#~ "klik\n"
-#~ "\"Laua eta taldeka antolaturik\" ikonoak.\n"
-#~ "\n"
-#~ "\n"
-#~ "Menpekotasun oharrik jaso nahi ez baduzu, klik \"Menpekotasu automatikoak"
-#~ "\"\n"
-#~ "gainean. Hau egiten baduzu, kontutan izan pakete bat aukeratik kentzean, "
-#~ "isilean,\n"
-#~ "honen menpekotasuna duten beste bakete batzu kendu daitezkeela."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Goiko zerrendako CD guztiak badituzu, Ados klikatu.\n"
-#~ "Batere ez baduzu, Etsi klikatu.\n"
-#~ "Baten bat faltatuz gero, hautatuetatik atera eta ondoren,\n"
-#~ "Ados klikatu."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "Orain zure sagua frogatu dezakezu. Erabili botoiak eta gurpila\n"
-#~ "ezarpenak ongi dauden egiaztatzeko. Ala ez bada, \"Etsi\" sakatu "
-#~ "dezakezu\n"
-#~ "beste gidari bat aukeratzeko.\n"
-#~ "\n"
-#~ "\n"
-#~ "Botoi bakarreko sagu bat duen Apple makina batean instalatzen ari "
-#~ "bazara,\n"
-#~ "2. eta 3. sagu botoiak emulatzeko teklatu botoi batzu zehazteko aukera\n"
-#~ "emango zaizu. Honela, bai Linux kontsolan baita X Window GUIan ere "
-#~ "saguaren\n"
-#~ "funtzionalitate osoa erabili ahal izango duzu.\n"
-#~ "\n"
-#~ "ADB sagua badaukazu, mesedez, aukeratu USB, honela Linux kernelak hartuko "
-#~ "du\n"
-#~ "zure sagu hardwarea behar bezela mapeatzeko ardura."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Zure konputagailua Internet edo beste bertoko sare batera\n"
-#~ "lotu nahi baduzu , mesedez hautatu aukera zuzena. Mesedez, piztu zure "
-#~ "gailua\n"
-#~ "aukera zuzena hautatu aurretik DrakXek automatikoki detektatu dezan.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ez badaukazu Internet edo bertako sare batera loturarik, aukeratu\n"
-#~ "\"Ezgaitu sarea\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Sarea, instalazioa amaitu ondoren, ezarri nahi baduzu edo zure\n"
-#~ "sare loturaren ezarpena burutu baduzu, hautatu \"Eginda\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Ez da modemik detektatu. Mesedez, hautatu loturik dagoen portua.\n"
-#~ "\n"
-#~ "\n"
-#~ "Lagungarri gisa, lehenengo serie portua (Microsoft Windowsek \"COM1\"\n"
-#~ "deitzen duena) \"ttyS0\" deitzen da Linuxen."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "markatze aukerak sar zenezake. ez badakizu\n"
-#~ "edo ez bazaude zihur zer sartuz, informazio uzena zure Internet "
-#~ "ornitzailearieskatu\n"
-#~ "Ornitzailea, indarrean dagoen konexioarena."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Modema kanpokoa baduzu, piztu egizu DrakX-ek automatikoki ezar dezan"
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Piztu modem-a eta hauta zuzena."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Goiko informazioa ez baduzu, edo honetaz zihur ez bazaude\n"
-#~ "eska egiozu Internet ornitzaileari. Ez baduzu DNSren informaziorik\n"
-#~ "hori berori ere Internet ornitzaileak eman diezazuke."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Ostalari izena ezar zenezake behar izanez gero. Ez baduzu\n"
-#~ "ezagutzen, edo ez badakizu zer sartu, Internet Zerbitzu emaleari "
-#~ "galdeiozu."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Orain sarerako tresna egokitu zenezake:\n"
-#~ "\n"
-#~ "  * IP helbidea: ez badakizu, sare administrariari edo Internet "
-#~ "Zerbitzu \n"
-#~ " emaleari galdeiozu.\n"
-#~ "    Behean \"IP Automatikoa\" hautatuko baduzu, ez duzu IPrik ezarri "
-#~ "behar\n"
-#~ "  * Netmask: \"255.255.255.0\" ohikoena da. Ziur ez bazaude\n"
-#~ "administratzaileari edo Internet Zerbitzu emaleari galdetu.\n"
-#~ "\n"
-#~ "  * Automatic IP: Sareak BOOTP edo DHCP protokoloak erabiliz gero, "
-#~ "hautatu \n"
-#~ "aukera hau. Hautatuz gero, \"IP helbidea\"-rako ez de baliorik eman "
-#~ "behar.\n"
-#~ "Ziur ez bazaude, galdetu administrariari edo ISP-ari."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Orain, behar izanez gero, ostalari izena ezar zenezake.\n"
-#~ "Ez badakizu zer jarri administrariari edo Internet Zerbitzu emaleari "
-#~ "galdeiozu."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Orain, behar izanez gero, ostalari izena ezar zenezake.\n"
-#~ "Ez badakizu zer jarri, hutsik laga."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Markatze opziotan sar zintezke. Sartu beharreko informazioa\n"
-#~ "zure ISP-tik lor dezakezu."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Proxy-rik erabiliz gero, mesedez orain konfiguratu. Ez badakizu\n"
-#~ "ISP-ari edo sareko administrariari galdetu."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Pakete kriptografikoa instalatu dezakezu zure interneteko konexioa zuzen\n"
-#~ "badabil. Lehenengo hautatu zein mirror-etik jaitsi nahi dituzu paketeak "
-#~ "eta gero\n"
-#~ "instalatu beharreko paketeak hautatu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Mirror ete pakete kriptografikoak zure tokiko legeen arabera hautatu\n"
-#~ "behar dituzu."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Bizitokira egokitu zenezake orain ordu eremua."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Bertako irarkola (konputagailuari konektatua) edo urrutikoa\n"
-#~ "(Unix, Netware edo Microsoft Windows sareetakoa) egokitu zenezake orain."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Inprimatu ahal izan nahi baduzu, mesedez, aukeratu inprimaketa sistema "
-#~ "bat CUPS eta LPR artean.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS Unix sistementzako inprimaketa sistema berri, indartsu eta malgua "
-#~ "da\n"
-#~ "(CUPSen esanahia da \"Common Unix Printing System\"). Mandrake Linuxen "
-#~ "inprimaketa\n"
-#~ "sistema lehenetsia da.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR aurreko Mandrake Linux banaketetan erabiltzen zen inprimaketa sistema "
-#~ "zarra da.\n"
-#~ "\n"
-#~ "\n"
-#~ "Inprimagailurik ez baduzu, sakatu \"Batere ez\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linuxek inprimagailu moeta askorekin tratatu dezake. Hauetariko "
-#~ "bakoitzak\n"
-#~ "ezarpen desberdina behar du.\n"
-#~ "\n"
-#~ "\n"
-#~ "Zure inprimagailua zure konputagailura fisikoki loturik badago, aukeratu\n"
-#~ "\"bertoko inprimagailua\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Urruneko Unix makina batean kokaturiko inprimagailua erabili nahi "
-#~ "baduzu,\n"
-#~ "aukeratu \"Urruneko inprimagailua\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Urruneko Microsoft Windows makina batean kokaturiko inprimagailua (edo "
-#~ "SMB protokoloa darabilen\n"
-#~ "Unix makina) erabili nahi baduzu, aukeratu \"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Mesedez, piztu zure inprimagailua DrakX-ek detektatzen jarraitu "
-#~ "aurretik.\n"
-#~ "\n"
-#~ "Zenbait datu sartu behar dituzu hemen.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Inprimagailuaren izena: inprimagailu hilarak \"lp\" erabiltzen du "
-#~ "inprimagailu izen lehenetsi gisa. Beraz, \"lp\" izeneko inprimagailu bat "
-#~ "izan behar duzu.\n"
-#~ "     Inprimagailu bakarra badaukazu, izen ugari erabil ditzakezu "
-#~ "beretzako. Tutu hizki baten bidez (\"|\") banatu behar\n"
-#~ "     dituzu izenak. Beraz izen esanguratsuagoa nahi baduzu, hura jarri "
-#~ "behar duzu lehenbizi, adib: \"Nere inprimagailua|lp\".\n"
-#~ "     Bere izene(t)an \"lp\" duen inprimagailua izango da lehenetsia.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Azalpena: aukerakoa da, baino erabilgarria gerta daiteke zenbait "
-#~ "inprimagailu zure konputagailura loturik badaude edo\n"
-#~ "     beste konputagailuei inprimagailu hau erabiltzen uzten badiezu.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Kokapena: zure inprimagailuaren kokapenari buruzko informaziorik\n"
-#~ "     jarri nahi baduzu, hemen jarri (nahi duzuna idatzi dezakezu, "
-#~ "adibidez\n"
-#~ "     \"2. solairua\").\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Zure inprimagailua ez da detektatu. Mesedez, sartu loturik dagoen "
-#~ "gailuaren\n"
-#~ "izena.\n"
-#~ "\n"
-#~ "\n"
-#~ "Argibide gisa, inprimagailu gehienak lehenengo portu paralelora lotzen "
-#~ "dira. Honi \"/dev/lp0\" deitzen zaio GNU/Linux barruan eta \"LPT1\" "
-#~ "Microsoft Windows barruan."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Goiko zerrendakoetatik, irarkola hauta zenezake."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Irarkolari dagozkion aukerak hauta.\n"
-#~ "Haren dokumentazioa aztertu, aukerak ez badituzu ezagutzen.\n"
-#~ "\n"
-#~ "\n"
-#~ "Konfigurazioa saia zenezake hurrengo hurratsean, eta adatu erebehar den "
-#~ "modura ez badabil"
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Orain zure Mandrake Linux sistemarako pasahitza sar dezakezu.\n"
-#~ "Pasahitza birritan tekleatu beharko duzu, bigarrenean\n"
-#~ "lehena baieztatzeko.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root sistemaren administratzailea da eta sistemaren konfigurazioa\n"
-#~ "aldatu dezakeen bakarra. Beraz, kontuz hautatu\n"
-#~ "pasahitz hau! root kontuaren erabilpen maltzurrak\n"
-#~ "zure sistema eta datuentzako arriskutsua izan daiteke,\n"
-#~ "eta baita bertara konetatuta egon litezkeentzako.\n"
-#~ "Pasahitza gutxienez 8 hizkien luzera duen hitz eta zenbaki nahastea izan "
-#~ "beharko\n"
-#~ "litzateke. Inoiz ez idatzi inon.\n"
-#~ "\n"
-#~ "\n"
-#~ "Luzeegia edo konplikatuegia ere ez du izan behar, hau da: neke "
-#~ "handiegirik gabe gogora dezakezuna\n"
-#~ "behar du izan."
-
-#~ msgid ""
-#~ "If your network uses LDAP (or NIS) protocol for authentication, select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "Zure sareak autentifikaziorako LDAP (edo NIS) protokoloa erabiltzen "
-#~ "badu,\n"
-#~ "hautatu \"LDAP\" (edo \"NIS\") autentifikazio gisa. Ez badakizu, "
-#~ "galdeiozu zure sare\n"
-#~ "kudeatzaileari.\n"
-#~ "\n"
-#~ "Zure konputagailua ez badago kudeatutako sare batera loturik, "
-#~ "autentifikaziorako \"Betako tixategiak\" hautatu nahi ditzakezu."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Orain \"ohiko\" erabiltzaile kontua(k) egin dezakezu,\n"
-#~ "\"pribilegiatua\" root da. Pertsona bakoitzeko\n"
-#~ "kontu bat baino gehiago egin dezakezu, konputagailuaren erabileraren\n"
-#~ "arabera. Kontuan izan kontu bakoitzak bere aukerak erabiliko dituela\n"
-#~ "(entorno grafikoa, programen aukerak, etab.)\n"
-#~ "eta berezkoa den \"home direktorioa\", non hobespenak gordeko\n"
-#~ "diren.\n"
-#~ "\n"
-#~ "\n"
-#~ "Lehenengo eta behi, zurea den kontua egizu! Nahiz eta makinaren "
-#~ "erabiltzaile bakarraizan\n"
-#~ ", eguneroko erabileran ezin zintezke root modura konektatu: Oso a\n"
-#~ "arriskutsua izan daitekelako. Sistema izorratudezakezu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Beraz, sistemara ezarritako erabiltzaile kontuaz konektatuko zara\n"
-#~ ", eta root login-a bakarrik administraziorako eta mantenurako\n"
-#~ "erabiliko duzu."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Abiapen diska sortzea oso gomendagarria da. Ezin baduzu Zure\n"
-#~ "konputagailua abiatu, hau da berrinstalatu gabe berau berreskuratzeko\n"
-#~ "era bakarra."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO eta grub-en aukera nagusiak dira:\n"
-#~ "  - Abiarazteko unitatea: boot sektorea non (e.g. disko zurruna edo\n"
-#~ "non partizioadagoen esaten du). Bestera ez bada,\n"
-#~ "hauta \"/dev/hda\" .\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Atzerapena, jatorrizko imagina abiarazi aurretik: segunduen \n"
-#~ "hamarrekotan imagina abiarazi aurretik behar den itxaron denbora.\n"
-#~ "Erabilgarria teklatua ezagutu eta gero abiarazten diren sistemetan.\n"
-#~ "Abiarazlea ez du itzarongo ez baduzu \"atzerapen\"-en ezer edo zero "
-#~ "jarriz gero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video modua: Hau abiatzerakoan zein VGA testu modua hautatzeko da\n"
-#~ "Hurrengo balioak izan dezake: \n"
-#~ "    * arrunta: hauta 80x25 testu modua.\n"
-#~ "\n"
-#~ "    * <zenbakia>:  erabili dagokion testu modua.\n"
-#~ "\n"
-#~ "  - Garbitu \"/tmp\" abialdi bakoitzeko: \"/tmp\"en direktorio eta "
-#~ "fitxategi guztiak\n"
-#~ "ezabatu nahi baduzu, boot-ean gordeta dudenak, hauta auketra hau.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Zehaztu RAM beharrezko bada: zoritxarrez, BIOSek ez dute ematen modu "
-#~ "standarrean RAMaz\n"
-#~ "duten informazioa ematen. Beraz, Linux-ek akatsak egin ditzake RAMa "
-#~ "zenbatzerakoan.\n"
-#~ "Hala bada, duzun RAMaren tamaina hemen zehaztu zenezake. Kasu, 2-4 Mb-en "
-#~ "gorabeherak\n"
-#~ "normaltzat hartu behar dira."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO SPARC-en abiarazlea da: GNU/Linux eta bestelako\n"
-#~ "sistema eragileak abiarazi dezake.\n"
-#~ "Normalean, bestelako sistema eragileak zuzen detektatu eta instalatzen "
-#~ "dituzte.\n"
-#~ "Horrela ez bada, pantaila honetan sarrera eskuz gehitu zenezake.\n"
-#~ "Kontuz ibili eta parametro egokiak hautatu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Beste sistema eragile batzuetarako sarrera kendu nahiko duzu,\n"
-#~ " orduan dagokion sarrerak ezabatu. Hau egitekotan, \n"
-#~ "diskete abiarazlea beharko duzu, bestelako sistema eragilerik erabili "
-#~ "nahiez gero!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILOren aukera nagusiak dira:\n"
-#~ "  - Abiarazlearen instalazioa: Hauta GNU/Linux abiarazteko informazioa "
-#~ "non\n"
-#~ "ezarri nahi duzun. Egiten duzuna zehatz ez badakizu,\n"
-#~ "hauta \"diskoaren lehen sektorea (MBR)\"\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Atzerapena, jatorrizko imagina abiarazi aurretik: segunduen "
-#~ "hamarrekotan\n"
-#~ "imagina abiarazi aurretik behar den itxaron denbora.\n"
-#~ "Erabilgarria teklatua ezagutu eta gero abiarazten diren sistemetan.\n"
-#~ "Abiarazlea ez du itzarongo ez baduzu \"atzerapen\"-en ezer edo zero "
-#~ "jarriz gero."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Orain X Window Sistem konfiguratu behar duzu, hau\n"
-#~ "GNU/Linux GUIren (Graphical User Interface) muina da. Honetarako,\n"
-#~ "monitorea eta bideo txartela konfiguratu behar dituzu. Hurrats\n"
-#~ "gehienak automatikoak dira, beraz, zure lana hautatutakoa\n"
-#~ "baieztatzea eta onartzearena izango da :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Konfigurazioa bukatzerakoan, X abiaraziko da(kontrakoa\n"
-#~ "DrakX-i eskatzen ez badiozu) eta horrela frogatu dezakezu\n"
-#~ "aukeren egokiera. Ez bazaude konforme atzera jo dezakezu,\n"
-#~ "aukerak aldatu eta berriz frogatu."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "X konfigurazioan zerbait gaizki izanez gero, aukera hauek erabili\n"
-#~ "X Window Sistema konfiguratzeko."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Login grafikoa nahi baduzu \"Bai\" hautatu. Bestela, hautatu\n"
-#~ "\"Ez\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Zure sistemarentzako segurtasun maila bat aukeratu dezakezu. Begiratu "
-#~ "eskuliburua\n"
-#~ "  informazio zabala jasotzeko. Oinarrian, ez badakizu zer hautatu, "
-#~ "mantendu aukera lehenetsiak.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Zure sistema berabiaraziko da.\n"
-#~ "\n"
-#~ "Berabiarazi ondoren, Mandrake Linux sistema automatikoki kargatuko da.\n"
-#~ "Bestelako sistema eragilerik erabili nahi izanez gero mesedez irakurri\n"
-#~ "instrukzio gehigarriak."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Txekiarra (Programatzaileak)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Eslobakiarra (Programatzaileak)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Eratu beharreko profilaren izena:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Idatzi /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "Fitxategitik berreskuratu"
-
-#~ msgid "Save in file"
-#~ msgstr "Fitxategian gorde"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Floppy-tik berreskuratu"
-
-#~ msgid "Format all"
-#~ msgstr "Dena formateatu"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Partizio guztiak formateatu ondoren,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "partizio hoietako datu guztiak galduko dira"
-
-#~ msgid "Reload"
-#~ msgstr "Berkargatu"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Linuxaren replikazioarako auto install floppya egin nahi duzu?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL konfigurazioa"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Urrutiko CUPS zerbitzariaz, ez duzu hemen inolako irarkola "
-#~ "konfiguraziorik\n"
-#~ "egin behar; irarkolak automatikoki detektatuko dira.\n"
-#~ "Bestelako zerbitzarikik baduzu beste sare batetan, CUPS zerbitzariaren\n"
-#~ "IP helbidea eman beharko duzu, eta aukeran, kai zenbakia."
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "Sartu Inprimagailua Izena eta Aipamenak"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Urruneko ilara izena falta da!"
-
-#~ msgid "Command line"
-#~ msgstr "Agindu lerroa"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Irarkolarik ez"
-
-#, fuzzy
-#~ msgid "start it"
-#~ msgstr "murriztu"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Sare Ikuskapena"
-
-#~ msgid "Settings"
-#~ msgstr "Ezarpenak"
-
-#~ msgid "Profile "
-#~ msgstr "Profila "
-
-#~ msgid "Statistics"
-#~ msgstr "Estatistikak"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Bidaltze abiadura: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Jasotze abiadaura: "
-
-#~ msgid "Connection Time: "
-#~ msgstr "Lotura Denbora "
-
-#~ msgid "Logs"
-#~ msgstr "Erregistroak"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Internetera konektatzen"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Irteneteko konexioa etetzen"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Irteneteko konexioa ezin eten"
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Irteneteko konexioa etenda."
-
-#~ msgid "Connection complete."
-#~ msgstr "Konexio osoa."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Konexioaren akatsa.\n"
-#~ "Mandrake Control Center-en konfigurazioa begiratu."
-
-#~ msgid "Color configuration"
-#~ msgstr "Margo ezarpena"
-
-#~ msgid "sent: "
-#~ msgstr "bidali: "
-
-#~ msgid "received: "
-#~ msgstr "jasota: "
-
-#~ msgid "average"
-#~ msgstr "batazbeste"
-
-#~ msgid "Connect"
-#~ msgstr "Konektatu"
-
-#~ msgid "Disconnect"
-#~ msgstr "Eten konexioa"
-
-#~ msgid "/File/_New"
-#~ msgstr "/Fitxategi/_Barria"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>B"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/Fitxategi/_Ireki"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>I"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/Fitxategi/_Gorde"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>G"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/Fitxategi/Gorde _Horrela"
-
-#~ msgid "/File/-"
-#~ msgstr "/Fitxategi/-"
-
-#~ msgid "/_Options"
-#~ msgstr "/_Aukerak"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/Aukerak/Saioa"
-
-#~ msgid "/_Help"
-#~ msgstr "/_Laguntza"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/Laguntza/_Zerari buruz"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Ejekuzio Maila Lehenetsia"
-
-#~ msgid "Europe"
-#~ msgstr "Europa"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "Kendu isatsa"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Config fitxategia ezin ulertu."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Ezarpen fitxategi ulertezina"
-
-#~ msgid "Adapter"
-#~ msgstr "Egokitzailea"
-
-#~ msgid "Disable network"
-#~ msgstr "Sarea ezgaitu"
-
-#~ msgid "Enable network"
-#~ msgstr "Sarea gaitu"
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (edo ADSL) konexioa"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Itxi"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Zuzenean URI eman dezakezu, CUPS duen irarkola erabiltzeko."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Bai, ASCII orria inprimatu test modura"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Bai, PostScript orria inprimatu test modura"
-
-#~ msgid "Yes, print both test pages"
-#~ msgstr "Bai, orri biak inprimatu"
-
-#~ msgid "Paper Size"
-#~ msgstr "Paperaren tamaina"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Lana bukatzerakoan papera kanporatu?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint driver-aren aukerak"
-
-#~ msgid "Color depth options"
-#~ msgstr "Kolore sakontzsunaren aukerak"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Testua PostScript bezala inprimatu?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Mailada-hurrats testu finkoa?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Orrialdeen kopurua, irtendako orrialdeen arabera"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Eskubi/Ezker marginak puntuetan (erpuruaren 1/72)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Goi/Beheko marginak puntutan (erpuruaren 1/72)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "GostScript aukera estrak"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Testu aukera estrak"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Orriak atzetik aurrerako ordenean"
-
-#~ msgid "CUPS starting"
-#~ msgstr "CUPS abiarazten"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Irarkolaren urrutiko konexioa hautatu"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected.\n"
-#~ "In case of doubt, select \"Remote CUPS server\"."
-#~ msgstr ""
-#~ "Urrutiko CUPS zerbitzariaz, ez duzu hemen inolako irarkola "
-#~ "konfiguraziorik\n"
-#~ "egin behar; irarkolak automatikoki detektatuko dira.\n"
-#~ "Dudan bazaude, hauta \"Urrutiko CUPS zerbitzaria\"."
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Irarkola oro izena behar du( lp adibidez).\n"
-#~ "Betelako parametroak, kokapena, deskripzioa eman daitezke.\n"
-#~ "Zein izen du eta nola dago konektatua irarkola?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Irarkolen isats (inprimaketa lanak bideratzen diren tokia) oro izena\n"
-#~ "(maiz lp) eta honeri dagokion metaketa direktorioa behar du. Zein\n"
-#~ "izen eta direktorio erabili behar dira isats honetarako?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Isatsaren izena"
-
-#~ msgid "Spool directory"
-#~ msgstr "Metaketa direktorioa"
-
-#~ msgid "Disable"
-#~ msgstr "Ezgaitu"
-
-#~ msgid "Enable"
-#~ msgstr "Gaitu"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "LAN konfigurazioa"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Ornitzailearen dns 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Ornitzailearen dns 2"
-
-#, fuzzy
-#~ msgid "fsck failed: "
-#~ msgstr "muntaketak porrot egin du: "
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Sistema seguruago izan daitean, hautatu \"Fitxategi itzaldua erabili\" "
-#~ "eta\n"
-#~ "\"MD5 pasahitzak erabili\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Sareak NIS erabiliz gero, hautatu \"Erabil NIS\". Ez badakizu, sarearen "
-#~ "administrariari\n"
-#~ "galde egiozu."
-
-#~ msgid "yellow pages"
-#~ msgstr "orri horiak"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Zelan nahi duzu interneten sartu?"
-
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Kanfigurazioa, Lilo/Grub-ena"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Hautatutako tamaina %d%s"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr ""
-#~ "Abiatzeko script honek zure usb saguarentzako moduluak kargatzen saiatuko "
-#~ "da."
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Konexioa irekitzen..."
-
-#~ msgid "Configure..."
-#~ msgstr "Konfiguratu..."
-
-#~ msgid "cannot fork: "
-#~ msgstr "ezin sardexkatu: "
-
-#~ msgid "Standard tools"
-#~ msgstr "Tresna Standard-ak"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Abiatzeearen konfigurazioa"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Interneterako konexioa egokitua duzu, \n"
-#~ "konputagailua konexioa banatu dezake beste batzuekin.\n"
-#~ "Oharra: Sare Egokitzailea beharrezko duzu, bertako sarea egokitzeko.\n"
-#~ "\n"
-#~ "Banatu nahi al duzu zure konexioa?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Dependentzia automatikoak"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Konfiguratu LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Abiaratze flppy-a eraiki"
-
-#~ msgid "Format floppy"
-#~ msgstr "Formateatu floppy-a"
-
-#~ msgid "Choice"
-#~ msgstr "Aukera"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "aurora zeharkako ikuspegi dotorean"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "ohiko aurora bertikala"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitorea"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Zure sistemaren zenbait aukera gehigarri hauta dezakezu orain.\n"
-#~ "\n"
-#~ "  * disko zurrunaren optimizatzaileak erabili: Aukera hau\n"
-#~ "erabiltzaile adituentzat bakarrik, gaizki erabili izanez gero\n"
-#~ "disko zurruna urratu lezake. Ezagutuz gero bakarrik erabili.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * Hautatu segurtasun maila: Zure sistemarako segurtasun maila hauta\n"
-#~ "dezakezu. Ez badakizu \"Ertaina\" hautatu.\n"
-#~ "    Informazio gehiagorako gidaliburua aztertu.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * RAM tamaina zehatza: Zenbaitetan, GNU/Linux-ek ez du ongi "
-#~ "detektatzen\n"
-#~ "sisteman dagoen RAM guztia. Hau gertatuz gero,\n"
-#~ "adierazi tamaina zehatza. Oharra:  2 edo 4 Mb arteko diferentzia\n"
-#~ "normala da.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * Removable media automounting: Unitate eramangarriak (CD-ROM, Floppy, "
-#~ "Zip)\n"
-#~ "eskuz muntatu nahi ez baduzu, hau da, \"mount\" eta \"umount\",\n"
-#~ "tekleatu nahi ez baduzu hautatu atal hau. \n"
-#~ "\n"
-#~ "\n"
-#~ "  * Num Lock abiatzerakoan: Number Lock abiatzerakoan ezarrita\n"
-#~ "nahi izanez gero, hautatu hau (Oharra: Num Lock ez dabil X-en)."
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Internet/Sare sarrera"
-
-#~ msgid "Mail information"
-#~ msgstr "Posta informazioa"
-
-#~ msgid "Firewall Configuration Wizard"
-#~ msgstr "Firewall Konfiguraziorako Aztia"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Denetarik"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Denetariko galderak"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Segurtasun neurri altuetan ezin da supermount erabili"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "kasu: SEGURTASUN MAILA HONETAN, KONSOLAN EZIN DUZU ROOT LOGIN-IK EGIN!\n"
-#~ "Root izan nahi baduzu, erabiltzaile bezala login egin behar duzu eta gero "
-#~ "\"s\" erabili.\n"
-#~ "Orokorrero, zure makina zerbitzari bezala lan egingo du.\n"
-#~ "Abisatuta zaude."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Kasu, numlock-a piztuta izatean zenbait tekla zenbaikak ematen\n"
-#~ "dituzte, hizkien ordez (ad: sakatu `p' eta lortu `6')"
-
-#~ msgid "not connected"
-#~ msgstr "konektatu gabe"
-
-#~ msgid "Actions"
-#~ msgstr "Ekimenak"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Zientziako aplikazioak"
-
-#~ msgid "toot"
-#~ msgstr "toot"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Zerbitzari, Fitxategi/Irarkola/Samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Zerbitzaria, DNS/DHCP"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Lehenengo DNS zerbitzaria"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Bigarren DNS zerbitzaria"
-
-#~ msgid "using module"
-#~ msgstr "modulua erabiltzen"
-
-#~ msgid "Development, Database"
-#~ msgstr "Garatzea, Datubasea"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Garatzaile, Integratutako ingurua"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Garatzeile, ohiko tresnak"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "Kasu:\n"
-#~ "Aldaketak ezartzeak X izorra lezake."
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "Jarraitzekotan, %s ingurua itzaliko dut"
-
-#~ msgid "eth$_"
-#~ msgstr "eth$_"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Zein abiarazle erabili nahi duzu?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Auto instalatu disketea"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Aurkitu modema?"
-
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "ISDN konexioa egokitu"
-
-#~ msgid "Configure a cable connection"
-#~ msgstr "Konfiguratu kable bidezko konexioa"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Internet konexioa ezgaitu"
-
-#~ msgid "Configure local network"
-#~ msgstr "Konfiguratu bertoko sarea"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Interneterako konexioa egokitu / Bertoko sarea egokitu"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Bertoko sarea konfiguratua dago.\n"
-#~ "Nahi al duzu:"
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Aztiaz berkonfiguratu..."
-
-#~ msgid "Multimedia"
-#~ msgstr "Multimedia"
-
-#~ msgid "Sciences"
-#~ msgstr "Zientzia"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Chat (IRC edo berehalako mezuak) programak: xchat,licq, gaim eta FTP "
-#~ "tresnak"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Komunikatzeko errazgarriak"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Internet tresnak"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Datubaseen bezero eta zerbitzariak(mysql eta postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Garatzailearena C/C++"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Konfiguratu ordu eremua"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Sare egokitzailea 1 (eth0)"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(datuak galaraz lezake)"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "Disko zurrunaren optimizatzaileak erabili nahi?"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Hasterakoan zenbakien finkaketa (num lock) baimendu"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Biaeztatu Pasahitza"
-
-#~ msgid "default"
-#~ msgstr "Jatorrizkoa"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Zein da zure sistemaren erabilera?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Hauta instalatu nahi duzun tamaina"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Erabili diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "Norberarena"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Ziur zaude aditua zarela? \n"
-#~ "Txantxarik ez, arriskutsuak izan daitezkeenak egin ditzakezu hemen.\n"
-#~ "Honako galderei aurre eginbeharko duzu: ``Erabili fitxategi itzalduak "
-#~ "pasahitzentzako?'',\n"
-#~ "Horrelakoak erantzuteko prest?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Itzalpeko fitxategia erabili"
-
-#~ msgid "shadow"
-#~ msgstr "itzalpea"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "MD5 pasahitzak erabili"
-
-#~ msgid "Search"
-#~ msgstr "Bilatu"
-
-#~ msgid "Package"
-#~ msgstr "Paketea"
-
-#~ msgid "Text"
-#~ msgstr "Testua"
-
-#~ msgid "Tree"
-#~ msgstr "Zuhaitza"
-
-#~ msgid "Sort by"
-#~ msgstr "Honen arabera ordenatu"
-
-#~ msgid "Category"
-#~ msgstr "Kategoria"
-
-#~ msgid "See"
-#~ msgstr "Begiratu"
-
-#~ msgid "Installed packages"
-#~ msgstr "Instalatutako paketeak"
-
-#~ msgid "Available packages"
-#~ msgstr "Erabilgarri dauden paketeak"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Oztoak bakarrik erakutsi"
-
-#~ msgid "Expand all"
-#~ msgstr "Dena zabaldu"
-
-#~ msgid "Collapse all"
-#~ msgstr "Batu dena"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Paketeen kokapena gehitu"
-
-#~ msgid "Update location"
-#~ msgstr "Eguneratu kokapena"
-
-#~ msgid "Remove"
-#~ msgstr "Ezabatu"
-
-#~ msgid "Find Package"
-#~ msgstr "Bilatu paketea"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Fitxategia duen paketea bilatu"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Aldatu instalatu eta aukeran daudenen artean"
-
-#~ msgid "Choose package to install"
-#~ msgstr "Aukeratu instalatu beharreko paketea"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Dependentziak saiatzen"
-
-#~ msgid "Wait"
-#~ msgstr "Itxaron"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Hurrengo paketeak desinstalatuko dira"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "RPMak desinstalatzen"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Zein paketeaz ari zara"
-
-#~ msgid "%s not found"
-#~ msgstr "%s ezin aurkitu"
-
-#~ msgid "No match"
-#~ msgstr "Ez dago"
-
-#~ msgid "No more match"
-#~ msgstr "Ez dago gahiagorik"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake ``memoria gutxi''-ko moduan dago.\n"
-#~ "rpmdrake berabiaraziko dut fitxategiak bilatzeko aukera izan dezan"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Zein fitxategi bilatu nahi duzu?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Zer ari zara bilatzen?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Eman izena (ad: `extra', `commercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Direktorioa"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Ez dago cdrom-ik (/mnt/cdrom hutsik)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "RPMak duen direktorioaren URLa"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "FTP eta HTTP-rako, hdlist-erako kokapena eman behar duzu\n"
-#~ "Gaineko URL-arekin lotua izan behar du"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Mesedez hurrengo informazioa igorri"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s dagoeneko erabiltzen"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "RPMn basea eguneratzen"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "%s sarrera ezabatuko dut"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Oztoak bilatzen"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Oztoen bilaketak denbora hartzen du"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "ISDAN txartela aurkitu dut:\n"
-
-#~ msgid "France"
-#~ msgstr "Frantzia"
-
-#~ msgid "Other countries"
-#~ msgstr "Beste herrialdeak"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "Zein herrialdetan zaude?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Alcatel modema"
-
-#~ msgid "ECI modem"
-#~ msgstr "ECI modema"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr "Zure adsl modem-a alcatel-ekoa bada, hauta Alcatel. Bestela, ECI."
-
-#~ msgid "mandatory"
-#~ msgstr "ezinbesteko"
-
-#~ msgid "interesting"
-#~ msgstr "interesgarria"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (garrantzitsua)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (oso ederra)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (ederra)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Zure sagua serieko zein kaietara dago konektatua?"
-
-#~ msgid "Czech"
-#~ msgstr "Txekoa"
-
-#~ msgid "Slovakian"
-#~ msgstr "Eslobakiarra"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "Ezin instalatu ipchains RPM urpmi-z."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "Ezin instalatu dhcp RPM urpmi-z."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "Ezin instalatu linuxconf RPM urpmi-z."
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "Ezin instalatu bind RPM urpmi-z."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "Ezin instalatu caching-nameserver RPM urpmi-z"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Berkonfiguratu bertoko sarea"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Zure konputagailuaren Internet konexioa banatu dezakezu.\n"
-#~ "\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "Dana konfiguratua izan da.\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Internetera konektatu modem arruntaz"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Interentera konektatu ISDN-z"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Internetera konektatu DSL-z (edo ADSL-z)"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Internetera konektatu kablez"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Zein partizio mota nahi duzu?"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Hautatu \"Instalatu\" GNU/Linux-en aurretiko bertsiorik ez badago "
-#~ "instalatuta,\n"
-#~ "edo distribuzio edo bertsio bat baino gehiago erabili nahi baduzu.\n"
-#~ "\n"
-#~ "Hautatu \"Eguneratu\" Mandrake-ren aurretiko bertsioren bat eguneratu "
-#~ "nahi izanez gero.\n"
-#~ "\n"
-#~ "\n"
-#~ "Hauta:\n"
-#~ "\n"
-#~ "  - Gomendatua: inoiz ez baduzu Linux-ik instalatu.\n"
-#~ "\n"
-#~ "  - Norberarena: GNU/Linux ezagutzen baduzu, gero makinaren erabilera "
-#~ "nagusia hauta\n"
-#~ " dezakezu. behean ikus.\n"
-#~ "\n"
-#~ "  - Aditua: GNU/Linux menperatzen duzula suposatzen da eta\n"
-#~ "    oso berezitua de instalazioa egin nahi duzula. \"Norberarena\"\n"
-#~ "    instalazio motan bezala, zure makinaren erabilera hautatu ahal izango "
-#~ "duzu zure sistemarako.\n"
-#~ "    Baina mesedez, EZ HAUTA HAU ZERTAN ZABIZENEN EZ BADAKIZU!\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "Orain, Mandrake Linux sistema zein partiziotan instalatu nahi duzun\n"
-#~ "hauta dezakezu, aldez aurretik partizioak eginak badituzu (aurretikfrom "
-#~ "a\n"
-#~ "instalatutako GNU/Linux-an edo bestelako partizio tresna batek "
-#~ "egindakoak).\n"
-#~ "Bestera, disko zurrunaren partizioak definitu behar dira. Hau "
-#~ "egoterakoan\n"
-#~ "konputagailuaren disko zurruna erabilera desberdinetarako area "
-#~ "desberdinetan\n"
-#~ "zatitzen da.\n"
-#~ "\n"
-#~ "\n"
-#~ "Partizio berriak egin nahi izanez gero, erabili \"Auto allocate\" "
-#~ "etahorrela\n"
-#~ "Linux-ek partizio berriak egingo ditu automatikoki. Zatitu beharreko "
-#~ "diskoa\n"
-#~ "hautatzuko \"hda\" kliklatu lehenengo IDE diskorako,\n"
-#~ "\"hdb\" bigarrenerako edo \"sda\" lehenengo SCSI diskorako eta horrela "
-#~ "ere urrengokoak.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ohiko partizioak dira: root (/), direktorioen ierarkian sistemaren "
-#~ "fitxategien hasiera\n"
-#~ "puntua dena, eta /boot,konputagailua pizterakoan\n"
-#~ "sistema eragilea abiarazteko beharrezko diren\n"
-#~ "fitxategiak duena.\n"
-#~ "\n"
-#~ "\n"
-#~ "Partizio prozeduraren ekintzak atzerako biderik izan ohi ez dutenez,\n"
-#~ "esperientziarik ez duenarengan beldurra eta larritasuna eragin diezaioke. "
-#~ "DiskDrake-k\n"
-#~ "prozedura errazten du izua uxatzeko. Dokumentazioa kontsultatu eta\n"
-#~ "har ezazu behar duzun denbora hasi aurretik.\n"
-#~ "Teklatua erabiliz edozien aukeraz baliatu zaitezke: "
-#~ "partizioetatiknabigatu\n"
-#~ "Tab eta Gora/Bera geziez. Behin partizioa hautatua, zera erabil "
-#~ "zenezake:\n"
-#~ "\n"
-#~ "- Ctrl-c  partizio berria eraikitzeko (partizio hutsa hautatzekotan)\n"
-#~ "\n"
-#~ "- Ctrl-d  partizioa ezabatzeko\n"
-#~ "\n"
-#~ "- Ctrl-m  muntai puntua ezartzeko\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Berriki ezarritako edozein partizio formateatu beharko da erabilgarria\n"
-#~ "izateko (formateatu esan nahi du sistemen fitxategiak ezartzea). Orain, "
-#~ "agian\n"
-#~ "esistitzen direnetako zenbait partizio formateatu nahiko duzu, bertako "
-#~ "datuak\n"
-#~ "ezabatzeko. Oharra: aurretik zeuden partizioak formateatzea ez da "
-#~ "beharrezkoa\n"
-#~ "batez ere, mantendu nahi dituzun fitxategi eta datuak gordetzen baditu.\n"
-#~ "Normalean /home eta /usr/local dira gordetzen direnak."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Hautatutako paketeak instalatzen ari dira. Operazio honek\n"
-#~ "minutu gutxi batzuk iraun lezake, baina sistema eguneratzea hautatu\n"
-#~ "baduzu are gehiago iraun lezake operazioak eguneratzea egin beharko\n"
-#~ "delako."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "DrakX-ek ez du sagurik aurkitzen ez badu, edo egindakoa\n"
-#~ "aztertu nahi baduzu, gainean duzun saguen zerrenda duzu\n"
-#~ "eskura.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX'-en aukerekin ados bazaude settings, 'Ados' sakatu.\n"
-#~ "Bestela, zure saguarekin antza handiena zukeen sagua hautatu\n"
-#~ "menuan.\n"
-#~ "\n"
-#~ "\n"
-#~ "Seriean konektatutako sagua izanez gero, DrakX-i\n"
-#~ "serie-kaia adierazi beharko diozu."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Atal hau bertoko sarea (LAN) edo modem-a konfiguratzeko\n"
-#~ "da\n"
-#~ "\n"
-#~ "Hautatu \"Bertoko LAN\" eta DrakX-ek\n"
-#~ "zure makinako Ethernet egokitzailea bilatzen saiatuko da. PCI "
-#~ "egokitzaileak\n"
-#~ "automatikoki bilatu eta abiarazten dira.\n"
-#~ "Dena den, zure periferikoa ISA bada, autodetekzioak huts egingo du,\n"
-#~ "eta orduan agertuko zaizun zerrendatik hautatu beharko duzu driver-a.\n"
-#~ "\n"
-#~ "\n"
-#~ "SCSI egokitzaileentzat gertatzen den moduan, lehen aldian driverrak\n"
-#~ "egokitzailea frogatu lezake bere kabuz, bestela aukerak adierazi\n"
-#~ "beharko dizkiozu driver-ari, aukerak dokumentazioan edo harwarean\n"
-#~ "aurki ditzakezu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Mandrake Linux sistema sare batean dagoen konputagailuan\n"
-#~ "instalatuz gero, sare administrariak beharrezko duzun informazioa eman "
-#~ "beharko dizu\n"
-#~ "(IP helbidea, sareko submaskara\n"
-#~ "edo netmask, eta ostalariaren izena). Zure sare pribatua\n"
-#~ "instalatzen ari bazara helbidea hautatu beharko\n"
-#~ "duzu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Hautatu \"Deitu modem-ez\" eta modem bitarteko internet\n"
-#~ "konexioa konfiguratuko da. DrakX-ek, zure modem-a bilatzen saiatuko da\n"
-#~ "hau huts eginez gero aukeratu beharko duzu modem-aren serieko kaia\n"
-#~ "zein den."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "GNU/Linux-ek irarkola mota ugari erabil ditzake. Bakoitzak\n"
-#~ "bere egokiera behar du. Dena den kontuan izan irarkolaren isatsak\n"
-#~ " 'lp' izena jatorriz ezartzen duela; beraz izen hau duen irarkola\n"
-#~ "beharko duzu; baina zenbait izen eman ditzakezu irarkola berari\n"
-#~ "izenok '|' karaktereaz banatuz gero.\n"
-#~ "Beraz esanguratsua egingo zaizun izena eman nahi badiozu irarkolari "
-#~ "aurretik\n"
-#~ "jarri, adibidea: \"Nire irarkola|lp\".\n"
-#~ "Izenean \"lp\" duen irarkola jatorrizkoa izanen da.\n"
-#~ "\n"
-#~ "\n"
-#~ "Irarkola zuzenean konputagailuari lotuta egonez gero hautatu\n"
-#~ "\"Bertoko irarkola\". Gero zein kaietara lotuta dagoen adierazi\n"
-#~ "beharko duzu, eta iragazki egokia hautatu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Urruneko Unix makinari lotutako irarkola erabili nahi izanez gero,\n"
-#~ "hautatu \"Urruneko lpd\". Indarrean sartzeko\n"
-#~ ", ez da beharrezko erabiltzaile izena ez eta pasahitzik, baina\n"
-#~ "zerbitzariaren inprimitze isatsaren izena jakin beharko duzu.\n"
-#~ "\n"
-#~ "\n"
-#~ "SMB irarkola erabili nahi izanez gero (hau da,\n"
-#~ "urruneko Windows 9x/NT makinan kokatutakoa),\n"
-#~ "SMB izena (ez TCP/IP izena)eman beharko duzu, eta agian IP helbidea ere,\n"
-#~ "gehi erabiltzaile izena, lantaldea eta irakola erabiltzeko beharrezkoa\n"
-#~ "den pasahitza, eta, nola ez, irarkolaren izena. Bardin\n"
-#~ "NetWare irarkolentzako, baina kasu honetan ez duzu lantalde izenik eman "
-#~ "beharrik."
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "Oso gomendatua da hemen \"Bai\" erantzutea. Microsoft Windows\n"
-#~ "gerorago instalatzekotan boot sektorea ezabatuko dizu.\n"
-#~ "Esan zaizun bezala boot diskorik egin ez baduzu ezin izango duzu\n"
-#~ "GNU/Linux abiatu."
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Higiarazi pilotatxoa!"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Instalatu/Berreskuratu"
-
-#~ msgid "Rescue"
-#~ msgstr "Berreskuratu"
-
-#~ msgid "Germany"
-#~ msgstr "Germaniarra"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Germaniarra (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Zer egin nahiko zenuke?"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Aldaketak ahaztu?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Zein da zure sagu mota?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Erresoluzio automatikoak"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Eskuragarri dauden erresoluzioak bilatzearren, zenbaitzuk frogatuko "
-#~ "ditut.\n"
-#~ "Pantailak kliskatuko du...\n"
-#~ "Irten zaitezke nahi baduzu, bukatzerakoan beep-a entzengo duzu"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Eskuragarri dauden erresoluzioak aurkitzen saia naiteke (eg: 800x600).\n"
-#~ "Batzutan honen ondorioz makina eskegi daiteke.\n"
-#~ "Saiatuko naiz??"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Modu egokirik ezin aurkitu\n"
-#~ "Bestelako txartel edo monitoreaz saia zaitez"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Bilatu erresoluzio automatikoak"
-
-#~ msgid "tie"
-#~ msgstr "gorbata"
-
-#~ msgid "brunette"
-#~ msgstr "brunette"
-
-#~ msgid "girl"
-#~ msgstr "neska"
-
-#~ msgid "woman-blond"
-#~ msgstr "ile-horia"
-
-#~ msgid "automagic"
-#~ msgstr "automagikoa"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "nfs-aren muntaiak porrot egin du"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Enkriptatua"
-
-#~ msgid "Take over the hard drive"
-#~ msgstr "Hartu disko zurrun osoa"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "Sare lana ez egokitu"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Zure sistemarako bertoko LAN sarea konfiguratu nahi duzu?"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX-ek, XFree 3.3 eta XFree 4.0.-rako konfigurazio fitxategiak eratuko "
-#~ "ditu.\n"
-#~ "Jatorriz, 4.0 zerbitzaria erabiltzen da zure txartelak berau jasanez "
-#~ "gero.\n"
-#~ "\n"
-#~ "XFree 3.3 mantendu nahi?"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB Sagua"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB sagua (2 botoi)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB sagua(3 botoi edo gehiago)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB sagua"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "USB sagua (2 botoi)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB sagua (3 botoi edo gehiago)"
-
-#~ msgid "Logitech MouseMan/FirstMouse"
-#~ msgstr "Logitech MouseMan/FirstMouse"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Bus Mouse"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft Bus Mouse"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech Bus Mouse"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB Mouse (3 botoi edo gehiago)"
-
-#~ msgid "Have you been provided with a hostname?"
-#~ msgstr "Ostalari izenik baduzu?"
-
-#~ msgid "Show less"
-#~ msgstr "Gutxiago erakutsi"
-
-#~ msgid "Show more"
-#~ msgstr "Gehiago erakutsi"
-
-#~ msgid "Local Area Network specification"
-#~ msgstr "LANen espezifikazioak"
-
-#~ msgid "You may now decide which class C network to use.\n"
-#~ msgstr "Orain erabaki dezakezu zein C motako sarea erabili.\n"
-
-#~ msgid "Network:"
-#~ msgstr "Sarea:"
-
-#~ msgid "Internet Connection Sharing - setup of $device"
-#~ msgstr "Internet konexioaren banaketa - $tresnaren egokiera"
-
-#~ msgid ""
-#~ "The following interface is about to be configured:\n"
-#~ "\n"
-#~ "$interface\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Hurrengo interfacea konfiguratuko da:\n"
-#~ "\n"
-#~ "$interface\n"
-#~ "\n"
-
-#~ msgid "Everything configured!"
-#~ msgstr "Dana konfiguratua!"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Zein da zure teklatuaren itxura?"
-
-#~ msgid "pptp alcatel"
-#~ msgstr "pptp alcatel"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Saiatuko naiz PCMCIA txartelak bilatzen?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Saiatuko naiz %s unitateen bilaketan?"
-
-#~ msgid "Small(%dMB)"
-#~ msgstr "Txikia (%dMB)"
-
-#~ msgid "Modem Configuration"
-#~ msgstr "Modem-aren konfigurazioa"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr ""
-#~ "Zure sistemarako modem-markazioaren bitartezko sare-lana konfiguratu nahi "
-#~ "duzu?"
-
-#~ msgid "Do you want to configure a ISDN connection for your system?"
-#~ msgstr "Zure sistemarako bertoko ISDN konexioa konfiguratu nahi duzu?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Saiatuko naiz PCI unitateen bilaketan?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "root partizioaren bila."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: hau ez da root partizioa, mesedez aukeratu besteren bat."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "Mesedez hauta zein partizio erabili nahi duzu root partizio modura."
-
-#~ msgid "Autologin at startup"
-#~ msgstr "Autologin abiatzerakoan"
-
-#~ msgid "Autologin - Choose default user"
-#~ msgstr "Autologin - Hauta jatorrizko erabiltzailea"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "Windows partiziorik ez duzu!"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Linux4win-erako leku nahikorik ez duzu"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Ongi etorria LILOra, sistema eragilearen hautatzailera!\n"
-#~ "\n"
-#~ "Aukeren zerrenda ikusteko <TAB> sakatu.\n"
-#~ "\n"
-#~ "Kargatzeko, izena idatzi eta <ENTER> sakatu <ENTER> edo itxaron %d "
-#~ "segundu jatorriz hautatutakoa abiatzeko.\n"
-#~ "\n"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Ongi etorria SILOra, sistema eragilearen hautatzailera!\n"
-#~ "\n"
-#~ "Aukeren zerrenda ikusteko <TAB> sakatu.\n"
-#~ "\n"
-#~ "Kargatzeko, izena idatzi eta <ENTER> sakatu <ENTER> edo itxaron %d "
-#~ "segundu jatorriz hautatutakoa abiatzeko.\n"
-#~ "\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "SILOren aukera nagusiak"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Hemen daude SILOko hurrengo sarrerak.\n"
-#~ "Zenbait gehitu edo daudenak aldatu dezakezu."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Etiketa hau dagoeneko erabiltzen da"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "SILOren instalazioak porrot egin du. Errore hau izan da:"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX-ek PCI edo SCSI egokitzaileak bilatzen saiatuko da aldez aurretik.\n"
-#~ "Aurkitzekotan eta drivera(k) ezagutz geronautomatikoki ezarriko ditu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Zure SCSI egokitzailea ISA bada, edo DrakX-ek ezagutzen ez duen\n"
-#~ "PCIa bada, edo SCSI egokitzailerik ez baduzu, orduan zera galdetuko "
-#~ "zaizu;\n"
-#~ "ia SCSI egokitzailerik duzun ala ez.\n"
-#~ "Ez badaukazu \"Ez\" erantzun. Bat edo gehiago baduzu,\n"
-#~ "erantzun \"Bai\". driver zerrenda agertuko zaizu, eta bertatik bat "
-#~ "hautatu\n"
-#~ "beharko duzu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Driver-a hautatu ondoren, DrakX-ek aukerak eman nahi badiozu\n"
-#~ "galdetuko dizu. Lehenengo, utzi driver-ari harwarea frogatzen:\n"
-#~ "gehienetan ongi dabil.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ez badabil, zure Windows-aren (hau bada zure sistema) harwarearen "
-#~ "informazioa\n"
-#~ "dokumentaziotik lor dezakezu, instalazio gidan iradokitzen denez.\n"
-#~ "Hor izango dira driver-ari eman beharreko\n"
-#~ "aukerak."
-
-#~ msgid "Shutting down"
-#~ msgstr "Itzaltzen"
-
-#~ msgid "useless"
-#~ msgstr "erabileza"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Hautatu \"Instalatu\" Linux-en aurretiko bertsiorik ez badago "
-#~ "instalatuta,\n"
-#~ "edo distribuzio edo bertsio bat baino gehiago erabili nahi baduzu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Hautatu \"Eguneratu\" Mandrake-ren aurretiko bertsioren bat eguneratu "
-#~ "nahi izanez gero.\n"
-#~ "Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus),\n"
-#~ "6.1 (Helios), Gold 2000 edo 7.0 (Air)."
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "LILO erabili nahi duzu?"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "Orain, instalatu nahi dituzun paketeak hautatu ditzakezu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Lehenengo instalatu edo eguneratu nahi duzun pakete taldea hauta "
-#~ "dezakezu.\n"
-#~ "Hau eta gero, aukeratu nahi duzun tamainerako egokitutako pakete "
-#~ "gehigarriak hauta\n"
-#~ "dezakezu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Aditu moduan bazabiltza, paketeak banan-banan hauta ditzakezu.\n"
-#~ "Kontuan izan zenbait paketeen instalaziorako beste batzuen instalazioa "
-#~ "eskatzen dutela.\n"
-#~ "Hauek paketeen arteko dependentziak dira. Hautatzen duzun paketeak,\n"
-#~ "eta hauek eskatzen dituztenak automatikoki hautatuko dira\n"
-#~ "instalatzerakoan. Ezinezkoa da paketea instalatzea bere dependientzia "
-#~ "guztiak instalatu gabe."
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (Linux kargatzailea) Linux eta bestelako sistema eragileak abiaraz "
-#~ "lezake.\n"
-#~ "Gehienetan instalazioak detektatzen ditu. Zureak aurkitutakoen artean\n"
-#~ "ikusten ez badituzu, orain gehitu ditzakezu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Eskuragai izan nahi ez badituzu ere, orain ezabatu ditzakezu\n"
-#~ "(boot disketea beharko duzu orduan)."
-
-#~ msgid ""
-#~ "Now that you've selected desired groups, please choose \n"
-#~ "how many packages you want, ranging from minimal to full \n"
-#~ "installation of each selected groups."
-#~ msgstr ""
-#~ "Behin taldeak aukeratuta, mesedez hauta  \n"
-#~ "zenbat pakete nahi duzun, talde bakoitzeko minimotik \n"
-#~ "guztirarte."
-
-#~ msgid ""
-#~ "You need %dMB for a full install of the groups you selected.\n"
-#~ "You can go on anyway, but be warned that you won't get all packages"
-#~ msgstr ""
-#~ "%dMB beharko duzu hautatutako taldeak instalatzeko.\n"
-#~ "Aurrera jarrai dezakezu, baina pakete guztiak ez dituzu lortuko"
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "Instalatzeko aukeratu beste CDa"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Gomendatua: inoiz ez baduzu Linux-ik instalatu.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Norberarena: Linux ezagutzen baduzu, normal, garatzaile edo aditu\n"
-#~ "moduko instalazioak hauta dezakezu. Hautatu \"Arrunta\" ohiko "
-#~ "instalazioa\n"
-#~ "egitekotan. Hauta dezakezu \"Garatzailearena\" modua konputagailua "
-#~ "softwarea\n"
-#~ "garatzeko erabiliko baduzu batez ere, edo hautatu \"Zerbitzariarena\" "
-#~ "ohiko\n"
-#~ "zerbitzari (posta, inprimaketa,...) instalazioa egin nahi baduzu.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Aditua: GNU/Linux sakonki ezagutuz gero eta oso instalazio berezia\n"
-#~ "egin nahi baduzu,instalazio modu hau zuretzako da. Zure sistemaren\n"
-#~ "erabilera honela egin beharko duzu \"Norberarena\"."
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "Pakete kriptografikoak behera kargatzen"
-
-#~ msgid "Setup SCSI"
-#~ msgstr "SCSI-ren egokiera"
-
-#~ msgid "Installation CD Nr %s"
-#~ msgstr "Instalazioko CD Nr %s"
-
-#~ msgid ""
-#~ "Update installation image!\n"
-#~ "\n"
-#~ "Ask your system administrator or reboot to update your installation image "
-#~ "to include\n"
-#~ "the Cd-Rom image labelled \"%s\". Press Ok if image has been updated or "
-#~ "press Cancel\n"
-#~ "to avoid installation from this Cd-Rom image."
-#~ msgstr ""
-#~ "Instalazioaren imagina eguneratu!\n"
-#~ "\n"
-#~ "Administratzileari eskatu edo berabiatu instalazioaren imagina "
-#~ "eguneratzeko.\n"
-#~ "Horrela, \"%s\" izena duen Cd-Rom-a lortuko duzu. Ok sakatu imagina "
-#~ "eguneratu\n"
-#~ "bada edo Etsi sakatu Cd-Rom imagina honetatik instalazioa ezeztatzeko."
-
-#~ msgid "Which language do you want?"
-#~ msgstr "Zein hizkuntz nahi duzu?"
-
-#~ msgid "Hurt me plenty"
-#~ msgstr "Dena niretzat"
-
-#~ msgid "Which packages do you want to install"
-#~ msgstr "Zeintzuk pakete instalatu nahi duzu"
-
-#~ msgid "Local LAN"
-#~ msgstr "Bertoko LAN"
-
-#~ msgid "Installation CD Nr 1"
-#~ msgstr "Instalazioko CD Nr 1"
-
-#~ msgid "Password:"
-#~ msgstr "Pasahitza"
-
-#~ msgid "User name:"
-#~ msgstr "Erabiltzailearen izena"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr ""
-#~ "%d MB instalatzera noa. Programa gehiago instalatzea hautatu dezakezu"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "%s kickstart fitxategi txarra (%s-ren porrota)"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Tamaina: %s MB"
-
-#~ msgid "US Keyboard"
-#~ msgstr "Estatu Batuetako teklatua"
-
-#~ msgid "resizing"
-#~ msgstr "egokitzen"
-
-#~ msgid "formatting"
-#~ msgstr "formateatzen"
-
-#~ msgid "changing type of"
-#~ msgstr "honen mota aldatuz"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "%s partizioaren ondoren %s,"
-
-#~ msgid "linear"
-#~ msgstr "lineala"
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "Lineala (zenbait SCSIk horrelakoa behar dute)"
-
-#~ msgid "beginner"
-#~ msgstr "hasberria"
-
-#~ msgid "developer"
-#~ msgstr "garatzailea"
-
-#~ msgid "expert"
-#~ msgstr "aditua"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "HTP boot disketea ezin eraiki.\n"
-#~ "Instalazioa berabiarazi eta idatzi ``%s'' prompt-ean"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "Instalazioa berabiarazi behar duzu parametro berriekin"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "Instalazioa berabiarazi behar duzu, disketea erabiliaz"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "Disketea sartu unitatean HTP boot-a eratzeko\n"
-#~ "(Disketeko datu guztiak galduko dira)"
-
-#~ msgid ""
-#~ "Linux does not yet fully support ultra dma 66.\n"
-#~ "As a work-around i can make a custom floppy giving access the hard drive "
-#~ "on ide2 and ide3"
-#~ msgstr ""
-#~ "Linux-ek oraindik ez du ultra dma 66 jasatzen.\n"
-#~ "Konponbide modura disketea egin diezaizuket ide2 eta ide3 disko "
-#~ "zurrunerakosarbidea emanez"
-
-#~ msgid "A entry %s already exists"
-#~ msgstr "%s sarrera esistitzen da"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "Aukeratu instalatu edo "
-
-#~ msgid "What usage do you want?"
-#~ msgstr "Zein erabilera nahi duzu?"
diff --git a/perl-install/share/po/fake_c.pl b/perl-install/share/po/fake_c.pl
deleted file mode 100755
index 21cf25b04..000000000
--- a/perl-install/share/po/fake_c.pl
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/usr/bin/perl -lp
-
-s|^(__?\()| $1|;		# add a blank at the beginning (?!)
-
-s|_\(\[(.*),\s*(.*),\s*(.*)\]|ngettext($2,$3,$1)|; # special plural form handling
-
-s,\Qs/#.*//,,;			# ugly special case
-
-s,(^|[^\$])#([^+].*),"$1/*" . simpl($2) . "*/",e; 
-                                # rewrite comments to C format except for:
-                                # - ``#+ xxx'' comments which are kept
-                                # - ``$#xxx'' which are not comments
-
-s|//|/""/|g;			# ensure // or not understood as comments
-
-s|$|\\n\\|;			# multi-line strings not handled in C
-
-sub simpl {
-    local $_ = $_[0];
-    s,\*/,,g;
-    $_;
-}
diff --git a/perl-install/share/po/fi.po b/perl-install/share/po/fi.po
deleted file mode 100644
index 2103d5a89..000000000
--- a/perl-install/share/po/fi.po
+++ /dev/null
@@ -1,9966 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999, 2001 Mandrakesoft
-# Kim Enkovaara <kim.enkovaara@iki.fi>, 1999, 2000
-# Matias Griese <mahagr@utu.fi>, 2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-04-24 17:52+0200\n"
-"Last-Translator: Matias Griese <mahagr@utu.fi>\n"
-"Language-Team: Finnish\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-15\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.6\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Aseta kaikki näytöt erikseen"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Käytä Xinerama-laajennusta"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Määrittele vain kortin \"%s\" (%s) asetukset"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Monen näytön asettaminen"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Järjestelmäsi tukee monen näytön laitteistokokoonpanoa.\n"
-"Mitä haluat tehdä?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Näytönohjain"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Valitse näytönohjain"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Valitse X-palvelin"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X-palvelin"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Mitä versiota XFree-serveristä haluat käyttää?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Näytönohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit vain XFree %s:"
-"ssa.\n"
-"Korttisi on tuettu myös XFree %s:ssa, jossa on mahdollisesti parempi 2D-tuki."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Näytönohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit XFree %s:ssa."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s laitteistokiihdytetyllä 3D-tuella"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Näytönohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit XFree %s:ssa.\n"
-"HUOMAA, ETTÄ TUKI ON KOKEELLINEN JA VOI JUMITTAA TIETOKONEESI."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s KOKEELLISELLA laitteistokiihdytetyllä 3D-tuella"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Näytönohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit vain XFree %s:"
-"ssa.\n"
-"HUOMAA, ETTÄ TUKI ON KOKEELLINEN JA VOI JUMITTAA TIETOKONEESI.Korttisi on "
-"tuettu myös XFree %s:ssa, jossa on mahdollisesti parempi 2D-tuki."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFreen asentaminen"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Valitse näytönohjaimen muistin määrä"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Valitse optioita palvelimelle"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Valitse monitori"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Näyttö"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Sinun tulee valita vaakavirkistystaajuus näytöllesi. Voit joko valita "
-"jonkin\n"
-"allaolevista alueista, jotka vastaavat teollisuusstandardityyppejä tai "
-"syöttää\n"
-"jonkin muun alueen.\n"
-"\n"
-"On HYVIN TÄRKEÄÄ, että et valitse näyttötyyppiä, jonka "
-"vaakavirkistystaajuus\n"
-"on suurempi kuin oman näyttösi. Jos epäröit, valitse pienempi taajuus."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Vaakavirkistystaajuus"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Pystyvirkistystaajuus"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Näyttöä ei ole asetettu"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Näytönohjainta ei ole vielä asetettu"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Näytön resoluutiota ei ole vielä valittu"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Haluatko kokeilla asetuksia?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Varoitus: näytönohjaimesi testaaminen voi jumittaa tietokoneen"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Kokeile asetuksia"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"kokeile joidenkin parametrien muuttamista"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Tapahtui virhe:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Lopetan %d sekunnissa"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Onko tämä oikea asetus?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Tapahtui virhe, kokeile joidenkin parametrien vaihtamista"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Resoluutio"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Valitse resoluutio ja värisyvyys"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Näytönohjain: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 palvelin: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Asiantuntijatila"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Näytä kaikki"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Resoluutiot"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Näppäinasettelu: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Hiiren tyyppi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Hiiren laite: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Näyttö: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Näytön vaakajuovataajuus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Näytön virkistystaajuus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Näytönohjain: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Näytönohjain: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafiikkamuisti: %s kt\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Värisyvyys: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resoluutio: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 palvelin: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ajurit: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Valmistelen X-Windowin asetuksia"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Mitä haluat tehdä?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Vaihda näyttöä"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Vaihda näytönohjainta"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Vaihda palvelimen optioita"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Vaihda resoluutiota"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Näytä tiedot"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Kokeile uudelleen"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Lopeta"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Säilytä muutokset?\n"
-"Nykyiset asetukset ovat:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Kirjaudu uudelleen %s:een aktivoidaksesi muutokset"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Kirjaudu ulos ja kirjoita sitten Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "Käynnistettäessä X:ää"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"X voidaan laittaa käynnistymään automaattisesti käynnistyksen yhteydessä.\n"
-"Haluatko käynnistää X:n automaattisesti?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 väriä (8 bittiä)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tuhatta väriä (15 bittiä)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tuhatta väriä (16 bittiä)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljoonaa väriä (24 bittiä)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljardia väriä (32 bittiä)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kt"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kt"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-#, fuzzy
-msgid "16 MB"
-msgstr "1 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-#, fuzzy
-msgid "32 MB"
-msgstr "2 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 Mt tai enemmän"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Perus-VGA,  640x480 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "SVGA, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-yhteensopiva, 1024x768 @ 87 Hz lomitettu (ei 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "SVGA, 1024x768 @ 87 Hz lomitettu, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Laajennettu SVGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Lomittamaton SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Korkeataajuuksinen SVGA, 1024x768 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Näyttö, joka pystyy 1280x1024 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Näyttö, joka pystyy 1280x1024 @ 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Näyttö, joka pystyy 1280x1024 @ 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Näyttö, joka pystyy 1600x1200 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Näyttö, joka pystyy 1600x1200 @ 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Ensimmäinen sektori käynnistysosiolla"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Levyn ensimmäinen sektori (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILOn asennus"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Minne haluat asentaa käyttöjärjestelmän lataajan?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "LILO/grub asennus"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO tekstipohjaisella valikolla"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO graafisella valikolla"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Käynnistä DOSista/Windowsista (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Käyttöjärjestelmän lataajan pääasetukset"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Käytettävä käyttöjärjestelmän lataaja"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Käyttöjärjestelmän lataajan asennus"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Käynnistyslaite"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ei toimi vanhoissa BIOSeissa)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Tiivis"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "tiivis"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Näyttötila"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Tauko ennen oletusjärjestelmän käynnistystä"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Salasana"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Salasana (uudelleen)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Rajoita komentorivioptioita"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "rajoita"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Tyhjennä /tmp jokaisella käynnistyskerralla"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Tarkka muistin koko, jos tarpeen (löydettiin %d Mt)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Käytä montaa profiilia"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Anna muistin koko megatavuina"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Asetus ``Rajoita komentorivioptioita'' ei ole hyödyllinen ilman salasanaa"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Yritä uudelleen"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Salasanat poikkeavat toisistaan"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Käynnistysviesti"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Vapaa Firmware-viive"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Timeout ytimen käynnistyksessä"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Mahdollista käynnistys CD:ltä"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Mahdollista käynnistys OFilta"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Oletuskäyttöjärjestelmä?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Tässä ovat asetustietueet.\n"
-"Voit lisätä uusia tai muuttaa olemassaolevia."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Lisää"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Valmis"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Muokkaa"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Minkä tyyppisen tietueen haluat lisätä"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Muu käyttöjärjestelmä (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Muu käyttöjärjestelmä (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Muu käyttöjärjestelmä (Windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Kuva"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Juuri"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Liitä"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Luku-kirjoitus"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Taulukko"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Turvaton"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Otsikko"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Oletus"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd:n koko"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "Ei Näyttöä"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Poista tietue"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Tyhjää otsikkoa ei sallita"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Otsikko on jo käytössä"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Löysin %s %s liitäntää"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Onko sinulla muita?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Onko koneessa %s liityntää?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Ei"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Kyllä"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Katso laitteistotietoja"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Asetan ajuria %s ohjaimelle %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(moduli %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Mitä %s-ajuria kokeillaan?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Joissakin tapauksissa %s-ajuri tarvitsee lisätietoja toimiakseen kunnolla,\n"
-"joskin tavallisesti se toimii hyvin ilmankin. Haluaisitko antaa ajurille\n"
-"lisämääreitä vai annatko sen itse etsiä tarvitsemansa tiedot? Joskus haku\n"
-"voi jumittaa tietokoneen, mutta se ei aiheuta vahinkoa."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Automaattihaku"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Lisäasetukset"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Voit antaa lisäasetuksia modulille %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Voit antaa lisäasetuksia modulille %s.\n"
-"Asetukset ovat muotoa ``nimi=arvo nimi2=arvo2 ...''.\n"
-"Esimerkiksi, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Moduulin optiot:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Modulin %s lataaminen epäonnistui.\n"
-"Haluatko yrittää muilla asetuksilla?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(jo lisätty %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Salasana on liian yksinkertainen"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Anna käyttäjätunnus"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Käyttäjätunnus saa sisältää vain pieniä kirjaimia, numeroita, `-' ja `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Käyttäjätunnus on jo lisätty"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Lisää käyttäjä"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Aseta käyttäjä\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Hyväksy käyttäjä"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Oikea nimi"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Käyttäjätunnus"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Komentotulkki"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Kuvake"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Automaattinen kirjautuminen"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Tietokoneen saa automaattisesti kirjoittautumaan sisään oletuskäyttäjänä.\n"
-"Jos et halua käyttää tätä ominaisuutta, paina peruuta-nappia."
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Valitse oletuskäyttäjä:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Valitse käytettävä ikkunointijärjestelmä:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Valitse käytettävä kieli."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "Voit valita kielet jotka ovat käytettävissä asennuksen jälkeen"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Kaikki"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Tervetuloa %s kayttojarjestelmanvalitsijaan!\n"
-"\n"
-"Valitse k~^Dytt~^Tj~^Drjestelm~^D yll~^D olevasta listasta tai\n"
-"odota %d sekuntia oletusk~^Dynnistyst~^D.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Tervetuloa GRUB k~^Dytt~^Tj~^Drjestelm~^Dnvalitsijaan!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Kayt~^D %c- ja %c-napp~^Dimi~^D valitaksesi korostetun tietueen"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Paina enter kaynnist~^D~^Dksesi valitun kaytt”j„rjestelm„n, 'e' muokataksesi"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komennot ennen k„ynnistyst„, tai 'c' komentoriville"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Korostettu tietue k„ynnistet„„n automaattisesti %d sekunnissa."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "ei tarpeeksi tilaa /boot-hakemistossa"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Työpöytä"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Käynnistysvalikko"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Minne haluat asentaa käyttöjärjestelmän lataajan?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ohjeita ei ole vielä olemassa.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Käynnistyksen tavan asetus"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Tiedosto"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Tiedosto/_Poistu"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Uuden tyylin kategoroiva tarkkailija"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Uuden tyylin tarkkailija"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Perinteinen tarkkailija"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Perinteinen Gtk+ tarkkailija"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Käytä Auroraa käynnistyksen aikana"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub-tila"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Tällä hetkellä käytössä oleva järjestelmälataaja on %s.\n"
-"Valitse Aseta käynnistääksesi asennusohjelman."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Määrittele"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Käynnistila"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Järjestelmän tila"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Käytä X-Window-järjestelmää"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Ei, en halua autologinia"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Kyllä, haluan autologinin (käyttäjä, ympäristö)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Peruuta"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ei voi lukea tiedostoa /etc/inittab: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "LILO:n asennus epäonnistu. Seuraava virhe tapahtui:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "Gt"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "Kt"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "Mt"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "Tt"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuuttia"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minuutti"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekuntia"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Tee ensin varmuuskopio tiedoistasi"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Lue tarkkaan!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Jos aiot käyttää aboot:ia, varmista että jätät vapaata tilaa levyn alkuun\n"
-"(2048 sektoria on tarpeeksi)"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Virhe"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Velho"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Uusi"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "Etäjonon nimi:"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Liitospaikka"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Optiot"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Tyyppi"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Irroita"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Liitä"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Valitse toiminta"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Sinulla on yksi suuri FAT-osio.\n"
-"(Yleensä Microsoft DOS/Windowsin käytössä).\n"
-"Ehdotus: muuta ensimmäiseksi osion kokoa\n"
-"(klikkaa osiota ja valitse sitten \"Uusi koko\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Klikkaa osiota"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Klikkaa osiota"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Klikkaa osiota"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Yksityiskohdat"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "liittäminen epäonnistui"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Tyhjä"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Muu"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Tiedostojärjestelmien tyypit:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Luo"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Käytä sen sijaan ``%s'':ää"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Poista"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Käytä ensin komentoa ``Irroita''"
-
-# mat
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Vaihdettuasi osion %s tyyppiä kaikki sillä olevat tiedot häviävät"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Minne haluat liittää laitteen %s?"
-
-#: ../../diskdrake.pm_.c:500
-#, fuzzy
-msgid "Mount options"
-msgstr "Moduulin optiot:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:525
-#, fuzzy
-msgid "Removable media"
-msgstr "Vaihdettavien medioiden automaattinen liittäminen"
-
-#: ../../diskdrake.pm_.c:532
-#, fuzzy
-msgid "Change type"
-msgstr "Muuta osiotyyppiä"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Minkä tiedostojärjestelmän haluat?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Palvelin"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Valitse toiminta"
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Luo uusi osio"
-
-#: ../../diskdrake_interactive.pm_.c:188
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Vaihda asiantuntijatilaan"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Vaihda normaalitilaan"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Peruuta"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Jatka joka tapauksessa?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Lopeta tallentamatta"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Lopeta kirjoittamatta osiotalua?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Haluatko kokeilla asetuksia?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Automaattinen varaus"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Tyhjennä kaikki"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Lisäasetukset"
-
-#: ../../diskdrake_interactive.pm_.c:250
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Kiintolevyjen tunnistus"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Ei tarpeeksi tilaa automaattiseen tilanvaraukseen"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Kaikki primääriosiot käytetty"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Uusia osioita ei voida lisätä"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Voidaksesi luoda lisää osioita tuhoa yksi olemassaoleva osio jotta voisit "
-"luoda laajennetun osion"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Kirjoita osiotaulu"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Pelasta osiotaulu"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Pelasta osiotaulu"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Pelasta osiotaulu"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Vaihdettavien medioiden automaattinen liittäminen"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Valitse tiedosto"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Osiotaulun varmuuskopio ei ole saman kokoinen\n"
-"Jatka silti?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Varoitus"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Aseta levyke asemaan\n"
-"Kaikki levykkeen tiedot häviävät"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Yritän osiotalulun palautusta"
-
-#: ../../diskdrake_interactive.pm_.c:340
-#, fuzzy
-msgid "Detailed information"
-msgstr "Näytä tiedot"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Uusi koko"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Siirrä"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Alusta"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Aktiivinen"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Lisää RAIDiin"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Lisää LVM:iin"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Poista RAIDista"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Poista LVM:stä"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Muokkaa RAIDia"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Käytä loopback-tiedostoa"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Luo uusi osio"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Aloitussektori: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Koko Mt: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Tiedostojärjestelmä: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Liitospaikka: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Etuoikeus: "
-
-# mat
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Alustan loopback-osiota %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Muuta osiotyyppiä"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-# mat
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Minne haluat liittää loopback-tiedoston %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ei voida poistaa liitospaikkaa koska osiota käytetään loopback-tilassa.\n"
-"Poista loopback-tiedosto ensin"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Lasken FAT-tiedostojärjestelmän rajoja"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Muutan kokoa"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Tämän osion kokoa ei voi muuttaa"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Kaikki osion tiedot tulee varmuuskopioida"
-
-# mat
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Osion %s koon muuttamisen jälkeen kaikki osion tiedot tuhoutuvat"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Valitse uusi koko"
-
-#: ../../diskdrake_interactive.pm_.c:591
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Koko Mt: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Mille levylle haluat siirtää?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sektori"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Mille sektorille haluat siirtää?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Siirrän"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Siirrän osiota..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Valitse olemassaoleva RAID johon lisätään"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "uusi"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Valitse olemassaoleva LVM johon lisätään"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "LVM:n nimi?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Osiota ei voida käyttää loopback-osiona"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Loopback tiedostonimi: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Oikea nimi"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Tiedosto on jo käytössä toiselle loopbackille, valitse toinen"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Tiedosto on jo olemassa. Käytä sitä?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "laite"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "taso"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "palan koko"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Varo: tämä on vaarallinen toiminto"
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Minkä tyyppinen osiointi?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"/boot hakemistoa ei voida luoda näin kauas levyn alusta (sylinterille joka "
-"on > 1024).\n"
-"Joko käytät LILOa ja se ei toimi, tai et käytä LILOa, jolloin et tarvitse /"
-"boot -hakemistoa"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Osio jolle valitsit juuren (/) on fyysisesti yli 1024 sylinterin levyllä,\n"
-"eikä sinulla ole /boot osiota.\n"
-"Jos haluat käyttää LILO-käynnistyksenhallintaa, lisää Linuxille /boot osio."
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Olet valinnut ohjelmallisen RAID-osion juuriosioksi (/).\n"
-"Mikään käynnistyslataaja ei osaa käsitellä tätä ilman /boot -osiota.\n"
-"Lisää /boot -osio, jos haluat käyttää liloa tai grubia"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Levyn %s osiotaulu kirjotetaan levylle!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Sinun täytyy käynnistää kone uudelleen ennen kuin muutos tulee voimaan"
-
-# mat
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Kaikki osiolla %s olevat tiedot häviävät osion alustuksen yhteydessä"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Alustan"
-
-# mat
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Alustan loopback-osiota %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Alustan osiota %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid epäonnistui"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Ei tarpeeksi tilaa uusien osioiden luomiseksi"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Ei tarpeeksi tilaa uusien osioiden luomiseksi"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Resoluutio: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Laite: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-asema: %s (vain arvaus)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Tyyppi: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Nimi: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Alkaa: sektori %s\n"
-
-# mat
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Koko: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektoria"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Sylinteristä %d sylinteriin %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Alustettu\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Ei alustettu\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Liitetty\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback tiedostot: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Osiolta käynnistetään oletuksena\n"
-"    (MS-DOS käynnistys, ei lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Taso %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Palan koko %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-levyt %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback-tiedoston nimi: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"On mahdollista, että tämä osio on\n"
-"ajuriosio. Sinun olisi kaiketi\n"
-"parasta jättää se rauhaan.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Tämä erityinen Bootsrap-\n"
-"osio on järjestelmäsi\n"
-"kaksoiskäynnistämiseksi.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Koko: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s sylinteriä, %s lukupäätä, %s sektoria\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Tietoja: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-levyt %s\n"
-
-# mat
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Osion tyyppi: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "väylässä %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Optiot: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s:n alustus %s:ta epäonnistui"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "en osaa alustaa %s:ää tyyppiä %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "liittäminen epäonnistui"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "liittäminen epäonnistui: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "virhe irroitettaessa %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "yksinkertainen"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "palvelin"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Et voi käyttää JFS:ää alle 16 Mt osioilla"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Et voi käyttää ReiserFS:ää alle 32 Mt osioilla"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Liitospaikan pitää alkaa /-merkillä."
-
-# mat
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "On jo olemassa osio, jonka liitospaikka on %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Et voi käyttää LVM loogista taltiota liitekohtana %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Tämän hakemiston pitäisi olla juuritiedostojärjestelmässä"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Tarvitset tähän liitoskohtaan oikean tiedostojärjestelmän (ext2, reiserfs)\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Virhe kirjoitettaessa tiedostoon %s: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"On tapahtunut virhe - ei löytynyt ainuttakaan laitetta, joille voi luoda "
-"uuden tiedostojärjestelmän. Tarkista laitteistosi korjataksesi ongelman"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Sinulla ei ole yhtään osiota!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Yllä on lueteltu kiintolevyillä olevat Linux-osiot. Voit pitää velhon "
-"tekemät\n"
-"valinnat, jotka ovat sopivat tavalliseen käyttöön. Jos muutat näitä "
-"valintoja,\n"
-"sinun täytyy määritellä vähintään juuriosio (\"/\").  Älä valitse liian "
-"pientä osiota\n"
-"sillä silloin kaikkia ohjelmia ei voida asentaa. Jos haluat tallettaa "
-"tietosi erilliselle\n"
-"osiolle, sinun täytyy valita myös \"/home\" (mikä on mahdollista vain, jos \n"
-"sinulla on enemmän kuin yksi Linux-osio).\n"
-"\n"
-"\n"
-"Tiedoksi: jokaisesta osiosta on listattu seuraavat tiedot: \"Nimi\", "
-"\"Kapasiteetti\".\n"
-"\n"
-"\n"
-"\"Nimi\" on koodattu seuraavalla tavalla: \"Kiintolevyn tyyppi\", "
-"\"Kiintolevyn numero\",\n"
-"\"Osion numero\" (esimerkiksi \"hda1\").\n"
-"\n"
-"\n"
-"\"Kiintolevyn tyyppi\" on \"hd\" jos kiintolevysi on IDE-levy ja \"sd\" jos "
-"se on\n"
-"SCSI-levy.\n"
-"\n"
-"\n"
-"\"Kiintolevyn kirjain\" on aina kirjain heti \"hd\":n tai \"sd\":n jälkeen. "
-"IDE-asemilla:\n"
-"\n"
-"   * \"a\" tarkoittaa \"herraksi määritelty kiintolevy ensisijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"   * \"b\" tarkoittaa \"orjaksi määritelty kiintolevy ensisijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"   * \"c\" tarkoittaa \"herraksi määritelty kiintolevy toissijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"   * \"d\" tarkoittaa \"orjaksi määritelty kiintolevy toissijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"\n"
-"SCSI-levyillä \"a\" tarkoittaa \"ensisijainen kiintolevy\", \"b\" "
-"puolestaan\n"
-"\"toissijainen kiintolevy\", jne..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Voit nyt valita mitä palveluita haluat käynnistää koneen käynnistyessä.\n"
-"\n"
-"\n"
-"Kun siirrät hiiren osoittimen palvelun päälle, pieni ohje tulee esiin\n"
-"ja kertoo palvelun tarkoituksen.\n"
-"0\n"
-"Ole varovainen näissä asetuksissa, jos aiot käyttää konettasi palvelimena: "
-"et\n"
-"varmaankaan halua käynnistää niitä palveluita, joita et tarvitse. Muista "
-"myös,\n"
-"että jotkin palvelut voivat olla vaarallisia, jos ne ovat käytössä "
-"palvelimessa.\n"
-"Yleensä kannattaa valita vain ne palvelut, joita todella tarvitset."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux hallitsee aikaa GMT:n (Greenwich Meridian Time) mukaan\n"
-"ja muuttaa sen paikalliseen aikaan valitsemasi aikavyöhykkeen mukaan."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-#, fuzzy
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Tässä vaiheessa sinun pitää valita mihin haluat asentaa Mandrake Linux\n"
-"-käyttöjärjestelmän. Jos kiintolevysi on tyhjä tai olemassaoleva "
-"käyttöjärjestelmä\n"
-"käyttää kaiken siinä olevan tilan, sinun pitää osioida kiintolevysi. "
-"Pohjimmiltaan\n"
-"kiintolevyn osiointi koostuu levytilan jakamisesta loogisiin osiin tilan "
-"saamiseksi\n"
-"Mandrake Linux -järjestelmälle.\n"
-"\n"
-"\n"
-"Koska osiointiprosessin vaikutukset ovat tavallisesti peruuttamattomia, voi\n"
-"osiointi olla pelottavaa ja stressaavaa kokemattomalle käyttäjälle. Tämä "
-"velho\n"
-"helpottaa prosessia. Ennen kuin aloitat, käytä riittävästi aikaa ohjekirjan\n"
-"osiointia koskevien kohtien lukemiseen.\n"
-"\n"
-"\n"
-"Tarvitset vähintään kaksi osiota. Toinen on käyttöjärjestelmää itseään,\n"
-"toinen virtuaalimuisia varten.\n"
-"\n"
-"\n"
-"Jos osiot on jo määritelty (edellisessä asennuksessa tai jonkin toisen\n"
-"osiointiohjelman toimesta), sinun tarvitsee vain valita ne käytettäväksi\n"
-"asentaaksesi Linux-järjestelmän koneeseesi.\n"
-"\n"
-"\n"
-"Jos osioita ei ole vielä määritelty, sinun pitää luoda ne. Käytä siihen "
-"tätä\n"
-"velhoa. Riippuen kiintolevysi asetuksista, sinulla voi olla useitakin "
-"vaihtoehtoja:\n"
-"\n"
-"\n"
-"* Tyhjennä koko lavy: jos haluat tuhota kaikki levyllä olevan tiedon sekä "
-"sillä olevat osiot ja asentaa Mandrake Linux -järjestelmän\n"
-"  näiden tilalle, voit valita tänän option. Ole varovainen tämän vaihtoehdon "
-"kanssa, sillä et pysty enää palauttamaan levyn sisältöä\n"
-"  ennalleen sen jälkeen, kun olet hyväksynyt toiminnon.\n"
-"\n"
-"\n"
-"* Käytä tyhjää tilaa Windows-osiossa: Jos Microsoft Windows on asennettuna "
-"kiintolevyllesi ja se käyttää kaiken levyllä\n"
-"  olevan tilan, sinun täytyy tehdä vapaata tilaa asentaaksesi Linuxin. "
-"Tehdäksesi sen, voit tuhota Microsoft Windowsin\n"
-"  käyttämän osion ja tiedot (katso kohta \"Tyhjennä koko lavy\" tai "
-"\"Asiantuntijatila\") tai voit muuttaa Microsoft Windowsin\n"
-"  käyttämän osion kokoa. Koon muuttaminen voidaan tehdä hävittämättä mitään "
-"levyllä olevista tiedoista.\n"
-"  Tämä vaihtoehto on suositeltu, mikäli haluat käyttää sekä Mandrake Linuxa "
-"että Microsoft Windowsia samalla tietokoneella.\n"
-"\n"
-"\n"
-"* Ennen kuin valitset edellisen vaihtoehdon, sinun tulee tietää, että "
-"Microsoft Windowsin käyttämän osion\n"
-"  koko tulee olemaan pienempi kuin nykyään. Sinulla tulee siis olemaan "
-"vähemmän tilaa uusien ohjelmien\n"
-"  asentamiseen ja tietojen tallentamiseen Microsoft Windowsin alla.\n"
-"\n"
-"\n"
-"* Asiantuntijatila: jos haluat osioida kiintolevysi itse, voit valita tämän "
-"vaihtoehdon. Älä valitse tätä ratkaisua,\n"
-"  ellet tiedä, mitä olet tekemässä. Tehokkuutensa lisäksi vaihtoehto on myös "
-"vaarallinen: voit helposti\n"
-"  menettää kaiken levylläsi olevan tiedon."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Kaikki uudet osiot täytyy alustaa käyttöä varten (jossa alustaminen \n"
-"tarkoittaa tiedostojärjestelmän luontia).\n"
-"\n"
-"\n"
-"Samalla voit haluta alustaa uudelleen myös olemassaolevia osioita\n"
-"poistaaksesi niissä jo olevat tiedot. Jos haluat haluat tehdä niin,\n"
-"valitse ne osiot, jotka haluat alustaa.\n"
-"\n"
-"\n"
-"Huomaa, että sinun ei ole pakko alustaa kaikkia jo olemassa olevia \n"
-"osioita. Mutta sinun olisi syytä alustaa ne osiot, joilla "
-"käyttöjärjestelmä \n"
-"sijaitsee (kuten \"/\", \"/usr\" ja \"/var\"). Voit säilyttää ne osiot, \n"
-"joilla henkilökohtaiset tiedostosi sijaitsevat (tavallisesti /home).\n"
-"\n"
-"\n"
-"Ole huolellinen, mitkä osiot valitset alustettavaksi, sillä alustamisen\n"
-"jälkeen kaikki niillä oleva tieto on poissa etkä voi enää palauttaa niitä.\n"
-"\n"
-"\n"
-"Valitse \"Ok\", kun olet valmis alustamaan osiot.\n"
-"\n"
-"\n"
-"Valitse \"Peruuta\", jos haluat valita eri osiot Mandrake Linuxn\n"
-"asentamiseen."
-
-#: ../../help.pm_.c:376
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Uutta Mandrake Linux -käyttöjärjestelmääsi asennetaan parasta aikaa.\n"
-"Tämä vaihe vie kymmeniä minuutteja (riippuen asennuksesi koosta\n"
-"ja tietokoneesi nopeudesta).\n"
-"\n"
-"\n"
-"Kärsivällisyyttä."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-#, fuzzy
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Tässä vaiheessa sinun pitää valita mille osioille haluat asentaa Mandrake "
-"Linux\n"
-"-käyttöjärjestelmän. Jos osiot on jo määritelty (edellisessä asennuksessa \n"
-"tai jonkin toisen osiointiohjelman toimesta), voit käyttää olemassaolevia "
-"osioita.\n"
-"Muuten kiintolevyosiot täytyy määrittää.\n"
-"\n"
-"\n"
-"Luodaksesi osioita, sinun täytyy ensiksi valita kiintolevy. Voit valita \n"
-"levyn osioitavaksi painamalla \"hda\" ensimmäille IDE-asemalle, \"hdb\"\n"
-"toiselle tai \"sda\" ensimmäiselle SCSI-levylle ja niin edelleen.\n"
-"\n"
-"\n"
-"Osioidaksesi valitun kiintolevyn, voit käyttää seuraavia vaihtoehtoja:\n"
-"\n"
-"\n"
-"   * Tyhjennä kaikki: tämä valinta tuhoaa kaikki osiot valitulla "
-"kiintolevyllä.\n"
-"\n"
-"\n"
-"   * Automaattinen varaus: Tämä valinta luo automaattisesti Ext2- ja "
-"virtuaalimuistiosiot kiintolevysi käyttämättömästä osasta.\n"
-"\n"
-"\n"
-"   * Pelasta osiointitaulu: jos osiointitaulu on vaurioitunut, voit yrittää "
-"toipua vaurioista käyttämällä tätä valintaa.\n"
-"     Muista, että tämä toimenpide voi myös epäonnistua.\n"
-"\n"
-"\n"
-"   * Peruuta: voit käyttää tätä valintaa peruaksesi tehdyt muutokset.\n"
-"\n"
-"\n"
-"   * Palauta: voit käyttää tätä valintaa, jos haluat perua kaikki muutokset "
-"ja palauttaa alkuperäisen osiointitaulun.\n"
-"\n"
-"\n"
-"   * Velho: jos haluat käyttää velhoa kiintolevysi osiointiin, voit käyttä "
-"tätä valintaa. Tämä on \n"
-"     suositeltu valinta, jos sinulla ei ole paljoa kokemusta osioinnista.\n"
-"\n"
-"\n"
-"   * Palauta levykkeeltä: jos olet tallentanut osiointitaulun levykkeelle, "
-"voit palauttaa tallennushetkellä \n"
-"     voimassa olleet asetukset.\n"
-"\n"
-"\n"
-"   * Tallenna levykkeelle: jos haluat tallentaa osiointitaulun levylle "
-"pystyäksesi palauttamaan sen,\n"
-"     voit käyttää tätä valintaa. Suosittelen, että teet tämän ennen kuin "
-"muutat osiointitietoja.\n"
-"\n"
-"\n"
-"   * Valmis: kun olet osioinut kiintolevysi, käytä tätä valintaa "
-"tallentaaksesi muutokset levylle.\n"
-"\n"
-"\n"
-"Kun osio on valittuna voit käyttää:\n"
-"\n"
-"\n"
-"           * Ctrl-c luodaksesi uuden osion (kun tyhjä osio on valittuna)\n"
-"\n"
-"           * Ctrl-d tuhotaksesi osion\n"
-"\n"
-"           * Ctrl-m asettaaksesi osion liitoskohdan tiedostojärjestelmässä\n"
-"\n"
-"\n"
-"Mikäli asennat järjestelmää PPC-koneelta, haluat luoda pienen HFS "
-"'bootstrap'-osion, jonka koko on vähintään \n"
-"1 Mt yaboot-järjestelmänlataajan käyttöön. Jos haluat, voit tehdä "
-"tuostaosiosta myös suuremman, sanotaan 50 Mt, \n"
-"käyttääksesi sitä varaytimen ja ramdisk-imagen tallentamiseksi järjestelmän "
-"latauksen hätätilanteita varten."
-
-#: ../../help.pm_.c:460
-#, fuzzy
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Kiintolevyltä on löytynyt useampia kuin yksi Microsoft Windows -osio.\n"
-"Valitse niistä se, jonka kokoa haluat muuttaa pystyäksesi asentamaan\n"
-"Mandrake Linuxn tietokoneeseesi.\n"
-"\n"
-"\n"
-"Tiedoksi: jokaisesta osiosta on listattu seuraavat tiedot: \"Nimi Linuxissa"
-"\", \n"
-"\"Nimi Windowsissa\", \"Kapasiteetti\".\n"
-"\n"
-"\n"
-"\"Nimi Linuxissa\" on koodattu seuraavalla tavalla: \"Kiintolevyn tyyppi"
-"\", \n"
-"\"Kiintolevyn numero\", \"Osion numero\" (esimerkiksi \"hda1\").\n"
-"\n"
-"\n"
-"\"Kiintolevyn tyyppi\" on \"hd\" jos kiintolevysi on IDE-levy ja \"sd\" jos "
-"se on\n"
-"SCSI-levy.\n"
-"\n"
-"\n"
-"\"Kiintolevyn kirjain\" on aina kirjain heti \"hd\":n tai \"sd\":n jälkeen. "
-"IDE-asemilla:\n"
-"\n"
-"   * \"a\" tarkoittaa \"herraksi määritelty kiintolevy ensisijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"   * \"b\" tarkoittaa \"orjaksi määritelty kiintolevy ensisijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"   * \"c\" tarkoittaa \"herraksi määritelty kiintolevy toissijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"   * \"d\" tarkoittaa \"orjaksi määritelty kiintolevy toissijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"\n"
-"SCSI-levyillä \"a\" tarkoittaa \"ensisijainen kiintolevy\", \"b\" "
-"puolestaan\n"
-"\"toissijainen kiintolevy\", jne...\n"
-"\n"
-"\"Nimi Windowsissa\" on kiintolevysi kirjain Windowsin alla ( ensimmäinen "
-"levy\n"
-"tai osio on nimetty \"C:\":ksi)."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Kärsivällisyyttä. Tämä toiminto voi kestää useita minuutteja."
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Valitse \"Asenna\", jos sinulla ei ole aikaisempaa versiota Mandrake "
-"Linuxsta\n"
-"asennettuna tai haluat käyttää useaa käyttöjärjestelmää.\n"
-"\n"
-"\n"
-"Valitse \"Päivitä\", jos haluat päivittää olemassaolevan version Mandrake "
-"Linuxsta.\n"
-"\n"
-"\n"
-"Riippuen osaamisestasi GNU/Linux-järjestelmissä, voit valita jonkin "
-"seuraavista tasoista Mandrake Linux -käyttöjärjestelmän asentamiseen tai "
-"päivittämiseen:\n"
-"\n"
-"\n"
-"* Suositeltu: jos et ole ikinä asentanut GNU/Linux-käyttöjärjestelmää, "
-"valitse tämä vaihtoehto.\n"
-"  Asennus tulee olemaan helppo ja sinulta tullaan kysymään vain muutama "
-"kysymys.\n"
-"\n"
-"\n"
-"* Mukautettu: jos tunnet GNU/Linuxin tarpeeksi hyvin, voit valita "
-"järjestelmän tyypin käytön mukaan\n"
-"  (työasema, palvelin, kehitys). Sinun tarvitsee vastata useampaan "
-"kysymykseen, kuin \"Suositellussa\" asennuksessa,\n"
-"  joten sinun täytyy tietää miten GNU/Linux toimii, jos haluat valita tämän "
-"asennusluokan.\n"
-"\n"
-"\n"
-"* Asiantuntija: jos tunnet GNU/Linux-järjestelmän hyvin, voit valita tämän "
-"asennusluokan. Kuten\n"
-"  \"Mukautetussa\" asennuksessa, sinun täytyy valita ensisijainen "
-"käyttökohde (työasema,\n"
-"  palvelin, kehitys). Tämä asennusluokka tarjoaa joustavimman asennuksen, "
-"mutta jotkin kysymykset\n"
-"  voivat osoittautua erittäin vaikeiksi niille, jotka eivät tunne GNU/"
-"Linuxia riittävän hyvin.\n"
-"  Älä valitse tätä asennusluokkaa, ellet ole aivan varma, mitä olet "
-"tekemässä."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Valitse oikea portti. Esimerkiksi MS Windowsin portti COM1\n"
-"on nimetty ttyS0:ksi GNU/Linuxissa."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the Linux LOader) ja Grup ovat järjestelmälataajia: niiden avulla voit "
-"käynnistää\n"
-"joko GNU/Linuxin tai mikä tahansa käyttöjärjestelmän, joka on "
-"tietokoneellasi.\n"
-"Tavallisesti kaikki käyttöjärjestelmät tunnistuvat ja asentuvat oikein. Jos "
-"jokin\n"
-"käyttöjärjestelmistä jää kuitenkin asentamatta, voit lisätä kyseisen "
-"järjestelmän itse.\n"
-"Ole kuitenkin huolellinen, että tulet valinneeksi oikeat parametrit.\n"
-"\n"
-"\n"
-"Jos et halua kenenkään saavan oikeuksia johonkin käyttöjärjestelmistä,\n"
-"tuhoa kyseinen kohta. Mutta huomaa, että siinä tapauksessa tarvitset itse\n"
-"käynnistyslevykettä päästäksesi kyseiseen käyttöjärjestelmään!"
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Sinun tulee kertoa minne haluat\n"
-"sijoittaa tarvittavat tiedot GNU/Linuxin käynnistämiseksi.\n"
-"\n"
-"\n"
-"Jos et todella tiedä mitä teet, valitse \"Levyn ensimmäinen\n"
-"sektori (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX hakee koneeseen asennettuja PCI-väyläisiä SCSI-laitteita. \n"
-"Jos SCSI-laite löytyy ja DrakX tietää mitä ajuria käyttää, laite otetaan \n"
-"automaattisesti käyttöön.\n"
-"\n"
-"\n"
-"Jos tietokoneessasi ei ole SCSI-laitetta tai DrakX ei tunnista sinulla \n"
-"olevaa ISA- tai PCI-väyläistä SCSI-laitetta, DrakX kysyy onko koneessasi\n"
-"SCSI-liityntää. Jos ei, voit vallita \"Ei\". Jos valitset \"Kyllä\", tulee \n"
-"näkyviin lista ajureista, josta voit valita sinulla olevan laitteen.\n"
-"\n"
-"\n"
-"Jos sinun täytyy valita ajuri manuaalisesti, DrakX kysyy, haluaisitko "
-"määrittää\n"
-"sille lisäoptioita. Sinun kannattaa antaa DrakX:n tutkia laitteistosi "
-"optioiden\n"
-"löytämiseksi, sillä yleensä kyseinen toiminto toimii hyvin.\n"
-"\n"
-"\n"
-"Jos ei, sinun pitää itse antaa optiot kyseiselle ajurille. Katso lisätietoja "
-"käyttöohjeesta\n"
-"(luku 3, osa \"Collective informations on your hardware\"), jossa on "
-"vinkkejä\n"
-"miten nämä tiedot löytyvät laitteiston ohjekirjoista, "
-"laittteistovalmistajan\n"
-"webbisivuilta (jos sinulla on internetyhteys) tai Microsoft Windowsista "
-"(jos\n"
-"se on asennettu tietokoneeseesi)."
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Valitse levyasema, jolle haluat asentaa uuden Mandrake Linux -osion.\n"
-"Ole varovainen, sillä kaikki tieto tällä asemalla tuhoutuu,\n"
-"eikä ole enää palautettavissa."
-
-#: ../../help.pm_.c:832
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Paina \"OK\", jos haluat tuhota kaiken tiedon ja osiot tältä\n"
-"kiintolevyltä. Myös levyllä olleet Windowsin tiedostot tuhoutuvat.\n"
-"Valittuasi \"OK\" et voi enää palauttaa näitä tietoja ennalleen,\n"
-"joten ole varovainen.\n"
-"\n"
-"\n"
-"Paina \"Peruuta\" peruuttaaksesi tämän toiminnon. Peruuttamalla\n"
-"toiminnon et menetä mitään levyllä olevia tietoja tai osioita."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Olet valinnut seuraavat palvelimet: %s\n"
-"\n"
-"\n"
-"Nämä palvelimet otetaan oletuksena käyttöön. Niissä ei ole tunnettuja \n"
-"turvallisuusaukkoja, mutta sellaisia voi löytyä ajan mittaan. Mikäli niin \n"
-"tapahtuu, pitäisi sinun päivittää kyseiset palvelimet niin nopeasti kuin \n"
-"suinkin mahdollista.\n"
-"\n"
-"\n"
-"Haluatko todella asentaa nämä palvelimet?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Aseta tyhjä FAT-alustettu levyke levyasemaan %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Tämä levyke ei ole FAT-alustettu"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Käyttääksesi tätä \"tallennetut paketit\" valintaa, käynnistä asennus "
-"optiolla \"linux defcfg=floppy\""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Virhe lukiessa tiedostoa %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Jokin osa laitteistoasi tarvitsee laitteistovalmistajan ajurit toimiakseen "
-"kunnolla.\n"
-"Voit löytää lisätietoja edellämainituista täältä: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Sinulla tulee olla juuriosio.\n"
-"Tätä varten luo osio (tai klikkaa olemassaolevaa).\n"
-"Valitse sitten toiminto ``Liitospaikka'' ja aseta se arvoon `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Sinulla tulee olla heittovaihtotiedosto"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Sinulla ei ole heittovaihto-osiota\n"
-"\n"
-"Jatka kuitenkin?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Sinulla tulee olla heittovaihtotiedosto"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Käytä tyhjää tilaa"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ei tarpeeksi tilaa uusien osioiden luomiseksi"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Käytä olemassa olevia osioita"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Ei ole olemassa olevaa osiota käytettäväksi"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Käytä Windows-osiota loopback-tiedostona"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Mille osiolle haluat laittaa Linux4Win:in?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Valitse koot"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Juuriosion koko Mt: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Sivutusosion koko Mt: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Käytä tyhjää tilaa Windows-osiolla"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Minkä osion kokoa haluat muuttaa?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Lasken Windows-tiedostojärjestelmän rajoja"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT-järjestelmän koon muuttaja ei osaa käsitellä osiotasi,\n"
-"saatiin seuraava virhe: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Windows-osiosi on liian pirstoutunut, mene Windowsiin ja aja \"defrag\" ensin"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"VAROITUS!\n"
-"\n"
-"DrakX aikoo muuttaa Windows-osiosi kokoa. Ole varovainen: tämä toimenpide\n"
-"on vaarallinen. Ellet ole vielä tarkistanut ja eheyttänyt Windows-osioitasi, "
-"poistu\n"
-"asennuksesta Windowsiin ja eheytä asema (scandisk ja defrag). Sinun olisi "
-"syytä\n"
-"samalla ottaa varmuuskopio tiedostoistasi. Kun olet tehnyt tämän, voit "
-"käynnistää\n"
-"asennusohjelman uudelleen, edetä tähän kohtaan ja painaa Ok."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Kuinka paljon tilaa haluat säilyttää Windowsilla"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "osio %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT-tiedostojärjestelmän koon muuttaminen epäonnistui: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ei ole FAT-osioita, joiden kokoa voisi muuttaa tai käyttää loopback-"
-"tiedostoina (tai osiot ovat täynnä)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Tyhjennä koko levy"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Poista Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Sinulla on enemmän kuin yksi kiintolevy. Mille haluat asentaa Linuxin?"
-
-# mat
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "KAIKKI olemassaolevat osiot ja niissä oleva tieto tuhoutuu asemalta %s"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Mukautettu levyn osiointi"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Käytä fdiskiä"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Voit nyt osioda kiintolevysi %s\n"
-"Kun olet valmis, älä unohda tallettaa asetuksia komennolla `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Sinulla ei ole tarpeeksi tilaa Windows-osiollasi"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Ei ole tarpeeksi tilaa asentamiseen"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX-Osiointivelho löysi seuraavat ratkaisut:"
-
-# mat
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Osiointi epäonnistui: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Käynnistän verkkoa"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Ajan alas verkkoa"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Tapahtui virhe, sitä ei voida käsitellä kunnolla.\n"
-"Jatka omalla riskilläsi."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Kahdentunut liitospaikka %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Osa tärkeistä paketeista jäi asentamatta loppuun asti.\n"
-"Joko cdrom-asemasi tai levy on viallinen.\n"
-"Tarkista cdrom Linux-koneessa käyttämällä \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-# mat
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Tervetuloa %s:n"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Ei levykeasemaa käytettävissä"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Siirryn vaiheeseen `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Valitse asennuksen koko"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Kokonaiskoko: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versio: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Koko: %d Kt\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Valitse asennettavat paketit"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Tietoja"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Asenna"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Asennan"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Odota hetki, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Jäljellä "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Kokonaisaika "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Valmistelen asennusta"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Asennan pakettia %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Jatka kuitenkin?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Tapahtu virhe järjestettäessä paketteja:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Käytä olemassaolevia asetuksia X11:ta?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Järjestelmäsi resurssit ovat lopussa. Voit kohdata ongelmia Mandrake Linuxa "
-"asentaessasi.\n"
-"Jos näin tapahtuu, voit kokeilla tekstipohjaista asennusta. Tehdäksesi niin "
-"paina `F1' kun\n"
-"käynnistät asennusohjelmaa CDROM-asemasta. Tämän jälkeen kirjoita `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Asennusluokka"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Valitse yksi seuraavista asennusluokista:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Valitsemiesi ryhmien kokonaiskoko on suunnilleen %d Mt.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Jos haluat asentaa vähemmän kuin tämä koko,\n"
-"valitse prosenttiosuus paketeista jonka haluat asentaa.\n"
-"\n"
-"Pieni prosenttiosuus asentaa vain tärkeimmät paketit,\n"
-"100%% osuus asentaa kaikki paketit."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Sinulla on levyllä tilaa vain %d%% paketeista\n"
-".Jos haulat asentaa vähemmän kuin tämän osan,\n"
-"valitse prosenttiosuus paketeista jotka haluat asentaa.\n"
-"Pieni prosentti asentaa vain tärkeimmät paketit, %d%%\n"
-" prosenttiosuus asentaa niin monta pakettia kuin on mahdollista."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Voit valita paketit tarkemmin seuraavassa vaiheessa"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Prosenttiosuus asennettavista paketeista"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Pakettiryhmien valinta"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Yksittäisten pakettien valinta"
-
-# mat
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Koko yhteensä: %d / %d Mt"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Viallinen paketti"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nimi: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Tärkeys: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Et voi asentaa tätä pakettia, koska levyllä ei ole tarpeeksi tilaa sen "
-"asentamiseksi"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Seuraavat paketit asennetaan"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Seuraavat paketit poistetaan"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Et voi valita/poistaa tätä pakettia"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Tämä on pakollinen paketti, sitä ei voida poistaa valinnoista"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Et voi poistaa tämän paketin valintaa. Se on jo asennettu"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Tämä paketti tulee päivittää\n"
-"Oletko varma että haluat poistaa valinnan?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Et voi poistaa tämän paketin valintaa. Paketti pitää päivittää."
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Näytä automaattisesti valitut paketit"
-
-#: ../../install_steps_gtk.pm_.c:460
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Tallenna levykkeelle"
-
-#: ../../install_steps_gtk.pm_.c:461
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Yksittäisten pakettien valinta"
-
-# Asennuksen sivuvalikko
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Minimal install"
-msgstr "Lopeta asennus"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Arvioin aikaa"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Valmistelen asennusta"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d pakettia"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Varoitus\n"
-"\n"
-"Lue huolellisesti alla olevat ehdot. Jos et ole samaa mieltä kaikkien\n"
-"ehtojen kanssa, sinulla ei ole oikeuksia asentaa seuraavaa CD-levyä.\n"
-"Paina 'Kieltäydyn' jos haluat jatkaa asennusta käyttämättä näitä osia.\n"
-"\n"
-"\n"
-"Jotkin seuraavalla CD-levyllä olevat komponentit eivät ole GPL:n tai \n"
-"vastaavanlaisen lisenssin alaisia. Jokaisen tällaisen komponentin ehdot \n"
-"on määritelty erikseen niiden omien lisenssien mukaan. Tutustu näihin \n"
-"lisensseihin huolellisesti ennen kuin käytät tai levität näitä "
-"komponentteja \n"
-"eteenpäin. Tällaiset lisenssit kieltävät tavallisesti siirtämisen, "
-"kopioimisen\n"
-"(lukuunottamatta varmuuskopioita), uudelleenlevityksen, "
-"käänteissuunnittelun \n"
-"binäärikoodin kääntämisen tai muokkaamisen. Jokainen rike sopimusta \n"
-"vastaan päättää oikeutesi kyseiseen lisenssiin. Ellei ole olemassa "
-"erityisiä \n"
-"ehtoja, jotka sallivat ohjelmiston asentamisen useaan koneeseen tai \n"
-"niiden käyttämistä verkon yli, et saa myöskään tehdä niin. Jos et ole \n"
-"varma kaikista ehdoista, ota yhteys suoraan kyseisen komponentin \n"
-"tekijään tai jakelijaan. Yllä mainittujen komponenttien tai niiden \n"
-"dokumentaation saattaminen kolmannen osapuolen käsiin on tavallisesti \n"
-"kieletty.\n"
-"\n"
-"\n"
-"Kaikki oikeudet seuraavan levyn komponentteihin kuuluvat niiden \n"
-"asianomaisille tekijöille ja ne on suojattu yksityisen omaisuuden ja \n"
-"ohjelmiston tekijänoikeuslakien avulla.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Hyväksy"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Hylkää"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Vaihda CD-levyä!\n"
-"\n"
-"Aseta CD-levy nimeltään \"%s\" CD-asemaan ja paina Ok kun olet valmis.\n"
-"Jos sinulla ei ole levyä, paina Peruuta välttääksesi asennukset tältä "
-"levyltä."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Tapahtu virhe asennettaessa paketteja:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Tapahtui virhe"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Lisenssin hyväksyminen"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Näppäimistö"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Valitse näppäimistösi asettelu."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Tässä on koko lista olemassa olevista näppäimistöistä"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Valitse asennuksen luokka?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Asenna/Päivitä"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Onko tämä asennus vai päivitys?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Suositeltu"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Asiantuntija"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Päivitä"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Valitse hiiren tyyppi."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Hiiren portti"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Mihin sarjaporttiin hiiresi on liitetty."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Näppäinemulaatio"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "2. näppäimen emulaatio"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "3. näppäimen emulaatio"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Asetan PCMCIA kortteja...."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Asetan IDE-levyä"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "ei vapaita osioita"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Tarkistan osioita löytääkseni liitoskohdat"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Valitse liitospaikat"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Osiotaulua ei voida lukea, siinä on liikaa virheitä :(\n"
-"Asennusta voidaan jatkaa yrittämällä tyhjentää virheelliset osiot\n"
-"(KAIKKI TIETO tuhoutuu!). Toinen vaihtoehto on kieltää DrakX:ää\n"
-"muokkaamasta osiointitaulua. (virhe on: %s)\n"
-"\n"
-"Hyväksytkö kaikkien osioiden menettämisen?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ei pystynyt lukemaan osiotaulua oikein.\n"
-"Jatka omalla vastuullasi!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:349
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Valitse alustettavat osiot"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Juuriosio"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Mikä on järjestelmäsi juuriosio (/) ?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Sinun tulee käynnistää järjestelmä uudelleen jotta muutokset tulevat voimaan"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Valitse alustettavat osiot"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Tarkista vialliset lohkot?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Alustan osioita"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Luon ja alustan tiedostoa %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Heittovaihtotiedosto ei ole riittävän suuri, suurenna sitä"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Etsin saatavilla olevia paketteja"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Etsin päivitettäviä paketteja"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Järjestelmässäsi ei ole riittävästi tilaa asennukseen tai päivitykseen (%d > "
-"%d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Täydellinen (%dMt)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimi (%dMt)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Suositeltu (%dMt)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Mukautettu"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:525
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Palauta levykkeeltä"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Palauta levykkeeltä"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Package selection"
-msgstr "Pakettiryhmien valinta"
-
-#: ../../install_steps_interactive.pm_.c:532
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Aseta tyhjä levyke levyasemaan %s"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Tallenna levykkeelle"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Valittu koko on suurempi kuin olemassa oleva levytila"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Jos sinulla on kaikki CD.levyt allaolevalta listalta, paina OK.\n"
-"Jos sinulla ei ole mitään levyistä, paina Peruuta.\n"
-"Jos jotkut levyistä puuttuvat, poista niiden valinnat, ja paina OK."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom nimeltään \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Asennan pakettia %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Asennuksen jälkeiset toiminnot"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Aseta tyhjä levyke levyasemaan %s"
-
-# mat
-#: ../../install_steps_interactive.pm_.c:725
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Aseta tyhjä levyke levyasemaan %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Sinulla on nyt mahdollisuus hakea internetistä ne ohjelmistot, jotka on \n"
-"suunnattu tiedon salakirjoittamiseen.\n"
-"\n"
-"VAROITUS:\n"
-"\n"
-"Näitä ohjelmistoja koskevien eri tasoisten vaatimusten ja eri "
-"lainsäädäntöjen \n"
-"määräysten vuoksi näiden ohjelmistojen asiakkaan ja/tai loppukäyttäjän \n"
-"pitää varmistaa, että hänen maansa lainsäädäntö sallii hänen hakea, "
-"tallentaa \n"
-"ja käyttää näitä ohjelmistoja.\n"
-"\n"
-"Lisäksi asiakkaan ja/tai loppukäyttäjän tulee olla erityisen varmoja siitä, "
-"etteivät \n"
-"he riko maansa lainsäädäntöä vastaan.Mikäli asiakas ja/tai loppukäyttäjä "
-"ei \n"
-"noudata näiden lakien määräyksiä, heille voidaan langettaa vakaviakin \n"
-"rangaistuksia.\n"
-"\n"
-"Missään tilanteissa ei Mandrakesoft tai sen valmistajat ja/tai "
-"jälleenmyyjät \n"
-"ole vastuuvelvollisia erityisiin, epäsuoriin tai satunnaisiin vahinkoihin, "
-"jotka\n"
-"voivat aiheutua (mukaan lukien, mutta ei rajoittuen: tulonmenetykset, \n"
-"yritystoiminnan katkeaminen, kaupallisten tietojen menetys ja muut \n"
-"rahalliset menetykset, sekä mahdolliset vahingonkorvaukset, jotka oikeus \n"
-"päättää langettaa). ohjelmiston käyttämisestä, hallussapidosta, tai "
-"pelkästä \n"
-"internetistä hakemisesta, jossa asiakas ja/tai loppukäyttäjä voi saada \n"
-"haltuunsa nämä ohjelmistot hyväksyttyään tämän sopimuksen.\n"
-"\n"
-"\n"
-"Mihin tahansa tätä sopimusta koskeviin tiedusteluihin, ota yhteys:"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Valitse peilijärjestelmä josta paketit haetaan"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Yhdistän peilijärjestelmään hakeakseni uusimman pakettilistan"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Valitse asennettavat paketit."
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Mikä on järjestelmäsi aikavyöhyke?"
-
-#: ../../install_steps_interactive.pm_.c:813
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Onko koneen kello asetettu GMT aikaan?"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:821
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS-palvelin"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Ulkoinen CUPS-palvelin"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Ei kirjoitinta"
-
-# Asennuksen sivuvalikko
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Johtopäätös"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Hiiri"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Aikavyöhyke"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Kirjoitin"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDN-kortti"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Äänikortti"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV-kortti"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-#, fuzzy
-msgid "NIS"
-msgstr "Käytä NIS:iä"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-#, fuzzy
-msgid "Local files"
-msgstr "Paikallinen kirjoitin"
-
-# Asennuksen sivuvalikko
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Ylläpitäjän salasana"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Ei salasanaa"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Salasana on liian yksinkertainen (sen tulee olla ainakin %d merkkiä pitkä)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Tunnistustapa"
-
-#: ../../install_steps_interactive.pm_.c:949
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Tunnistustapa"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:951
-#, fuzzy
-msgid "LDAP Server"
-msgstr "NIS-palvelin"
-
-#: ../../install_steps_interactive.pm_.c:957
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Tunnistus NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS-alue"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS-palvelin"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Mukautetulla käynnistyslevykkeellä voit käynnistää järjestelmän ilman\n"
-"tavanomaisen käyttöjärjestelmälataajan apua. Tästä on hyötyä, jos et halua\n"
-"asentaa SILOa järjestelmääsi, toinen käyttöjärjestelmä poistaa SILOn,\n"
-"tai SILO ei toimi laitteistossasi. Mukautettua käynnistyslevykettä voidaan\n"
-"käyttää myös Mandraken vikasietolevykkeen kanssa, jolloin vakavista\n"
-"järjestelmän virhetilanteista on helpompi toipua.\n"
-"\n"
-"Jos haluat luoda käynnistyslevykkeen järjestelmääsi, aseta levyke\n"
-"ensimmäiseen asemaan ja paina \"Ok\","
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Ensimmäinen levyasema"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Toinen levyasema"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Ohita"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Mukautetulla käynnistyslevykkeellä voit käynnistää järjestelmän ilman\n"
-"tavanomaisen käyttöjärjestelmälataajan apua. Tästä on hyötyä, jos et halua\n"
-"asentaa LILOa (tai grubia) järjestelmääsi, toinen käyttöjärjestelmä poistaa\n"
-"LILOn, tai LILO ei toimi laitteistossasi. Mukautettua käynnistyslevykettä "
-"voidaan\n"
-"käyttää myös Mandraken vikasietolevykkeen kanssa, jolloin vakavista\n"
-"järjestelmän virhetilanteista on helpompi toipua.\n"
-"Haluatko luoda käynnistyslevykkeen järjestelmääsi?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Levyajuria ei ole saatavilla"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Valitse levyasema jolla luot käynnistyslevykkeen"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Aseta tyhjä levyke levyasemaan %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Luon käynnistyslevykettä"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Valmistelen käyttöjärjestelmän lataajaa"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Haluatko käyttää aboot:ia?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Virhe asennettaessa aboot:a,\n"
-"yritä pakkoasennusta vaikka se tuhoaa ensimmäisen osion?"
-
-# Asennuksen sivuvalikko
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Lataajan asetus"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Järjestelmälataajan asennus epäonnistu. Seuraava virhe tapahtui:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Sinun täytyy muuttaa Open Firmware -käynnistyslaitetta\n"
-"saadaksesi järjeslelmälataajan päälle. Paina Command-Option-O-F\n"
-"uudelleenkäynnistyksen yhteydessä ja kirjoita:\n"
-"setenv boot-device $of_boot,\\\\:tbxi\n"
-"sitten kirjoita: shut-down\n"
-"Seuraavalla käynnistyskerralla sinun pitäisi nähdä käynnistyslataajan\n"
-"komentokehoite."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Matala"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Keski"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Korkea"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Valitse turvataso"
-
-# mat
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Aseta tyhjä levyke levyasemaan %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Valmistelen automaattiasennuslevykettä"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Joitain vaiheita ei ole saatettu loppuun.\n"
-"\n"
-"Haluatko todella lopettaa?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Onnittelut, asennus on valmis.\n"
-"Poista levyke asemasta ja paina Enter käynnistääksesi koneen uudelleen.\n"
-"\n"
-"Löydät tähän Mandrake Linuxn versioon olemassaolevat korjaukset ja\n"
-"korjattujen virheiden listan osoitteesta http://www.mandrakelinux.com.\n"
-"\n"
-"Järjestelmän asetusten muuttamisesta saat tietoja virallisen Mandrake "
-"Linuxn\n"
-"oppaan luvusta \"Asennuksen jälkeinen konfigurointi\""
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Valmistelen automaattista asennuslevykettä"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Automaattinen asennus voi olla täysin automatisoitu,\n"
-"jos niin halutaan. Siinä tapauksessa asennus täyttää\n"
-"koko kiintolevyn! (tarkoitettu toisen koneen asentamiseksi),\n"
-"\n"
-"Ehkä haluat mieluummin toistaa asennuksen.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automaattinen"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Toista"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Yksittäisten pakettien valinta"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Asennus %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> vaihtaa elementtiä  | <Space> valitsee | <F12> seuraava "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu puuttuu"
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "Valitse toiminta"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Lisäasetukset"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Odota hetki"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Laajenna puu"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Sulje puu"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Vaihda tasaisen ja ryhmäjärjestyksen välillä"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Epätarkka (%s), ole tarkempi\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Huono valinta, yritä uudelleen\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (oletus %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Valintasi? (oletus %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Valintasi? (oletus %s anna `ei mikään' jos et halua mitään) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Tsekki (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Saksa"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Espanja"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Suomi"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Ranska"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norja"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Puola"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Venäjä"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Ruotsi"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "UK näppäimistö"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "US näppäimistö"
-
-#: ../../keyboard.pm_.c:159
-#, fuzzy
-msgid "Albanian"
-msgstr "Iran"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armeenia (vanha)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armeenia (kirjoituskone)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armeenia (foneettinen)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belgia"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulgaria"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilia"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Valkovenäjä"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Sveitsi (Saksalainen järjestys)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Sveitsi (Ranskalainen järjestys)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Tsekki (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Saksa (ei kuolleita näppäimiä)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Tanska"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Norja (Dvorak)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Eesti"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgia (\"Venäläinen\"-järjestys)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgia (\"Latin\"-järjestys)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Kreikka"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Unkari"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Kroatia"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Israeli"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Israeli (Foneettinen)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iran"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islanti"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Italia"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japani 106-näppäiminen"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Korealainen näppäimistö"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latinalainen amerikka"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Liettua AZERTY (vanha)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Liettua AZERTY (uusi)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Liettua \"numerorivi\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Liettua \"foneettinen\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "Paikka"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Makedonia"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Hollanti"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Puola (qwerty järjestys)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Puola (qwertz järjestys)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugali"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Quebec)"
-
-#: ../../keyboard.pm_.c:217
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Venäjä (Yawerty)"
-
-#: ../../keyboard.pm_.c:218
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Venäjä (Yawerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Venäjä (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Slovenia"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakia (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakia (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Jugoslavia (latin/cyrillic)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Thai-näppäimistö"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Thai-näppäimistö"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turkki (perinteinen \"F\"-malli)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turkki (perinteinen \"Q\"-malli)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukraina"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "US näppäimistö (kansainvälinen)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamilainen \"numerorivi\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavia (latin/cyrillic)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Rengasmaisia liitoksia %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Poista loogiset osiot ensin\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Hiiri"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standardi"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Yleinen PS2 rullahiiri"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 näppäin"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Yleinen"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Rulla"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "sarja"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Yleinen 2-nappinen hiiri"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Yleinen 3-nappinen hiiri"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (sarja, vanha C7 tyyppi)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "väylähiiri"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 näppäintä"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 näppäintä"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "ei mikään"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Ei hiirtä"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Testaa hiiri"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Aktivoidaksesi hiiren,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "PYÖRITÄ HIIREN RULLAA!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Loppu"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Seuraava ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Edellinen"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Onko tämä oikein?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Ota yhteys internettiin"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Yleisin tapa liittyä asdl-verkkoon on käyttää pppoe:a.\n"
-"Jotkin yhteydet käyttävät pptp:tä, muutamat dhcp:tä.\n"
-"Jos et tiedä, mitä valita, valitse 'käytä pppoe:a'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "käytä dhpc:tä"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "käytä pppoe:a"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "käytä pptp:tä"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Mitä dhcp-asiakasohjelmaa haluat käyttää?\n"
-"Oletus on dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ethernet-verkkokorttia ei löytynyt järjestelmästä.\n"
-"Ei voida asentaa tämän tyyppistä yhteyttä."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Valitse verkkoliittymä"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Valitse mitä verkkokorteista haluat käyttää internetiin liittymiseen"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "verkkokorttia ei löytynyt"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Asetan verkkoa"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Syötä koneesi nimi, jos tiedät sen.\n"
-"Jotkin DHCP-palvelimet tarvitsevat koneen nimen toimiakseen.\n"
-"Koneesi nimen pitäisi olla täysin laillinen nimi, kuten\n"
-"\" minunkone.omapaikka.net\"."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Koneen nimi"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Verkkoasetusten velho"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Ulkoinen ISDN-modeemi"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Sisäinen ISDN-kortti"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Minkälainen ISND-yhteytesi on?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Palomuuri löydetty!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Palomuuri löydetty!"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN:n asetus"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Valitse palveluntarjoajasi.\n"
-" Jos se ei ole listassa, valitse `Ei listattu'"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Käynnistysprotokolla"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Eurooppa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Muu maailma"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Muu maailma \n"
-" ei D-kanavaa (leased lines)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Mitä protokollaa haluat käyttää?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Millainen kortti sinulla on?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "En tiedä"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Jos sinulla on ISA-kortti, seuraavien arvojen pitäisi olla oikeat.\n"
-"\n"
-"Jos sinulla on PCMIA-kortti sinun täytyy tietää korttisi IRQ ja IO.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Hylkää"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Jatka"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Mikä ISDN-kortti sinulla on?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Olen havainnut ISDN PCI-kortin, mutta en tunnista tyyppiä. Valitseyksi "
-"seuraavassa ruudussa olevista korteista."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "ISDN PCI-korttia ei löydetty. Valitse yksi seuraavasta ruudusta."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Valitse sarjaportti, johon modeemisi on kytketty."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Soittoasetukset"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Yhteyden nimi"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Puhelinnumero"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Käyttäjä ID"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Script-pohjainen"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Terminaalipohjainen"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Verkkoalueen nimi"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Ensimmäinen nimipalvelin (ei pakollinen)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Toinen nimipalvelin (ei pakollinen)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Voit joko katkaista yhteyden tai asettaa sen uudelleen."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Voit asettaa yhteytesi uudelleen."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Olet parasta aikaa yhteydessä internettiin."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Voit joko ottaa yhteyden internettiin tai asettaa yhteyden uudelleen."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Et ole juuri nyt yhteydessä internettiin."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Ota yhteys internettiin"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Katkaise internetyhteys"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Aseta verkkoasetukset (lähiverkko tai internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Internetyhteyden muodostus ja asetukset"
-
-#: ../../network/netconnect.pm_.c:96
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Voit joko katkaista yhteyden tai asettaa sen uudelleen."
-
-#: ../../network/netconnect.pm_.c:105
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Voit joko katkaista yhteyden tai asettaa sen uudelleen."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Verkon asetukset"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Koska asennat käyttöjärjestelmää verkon yli, verkkon asetukset ovat jo "
-"tehty.\n"
-"Paina Ok säilyttääksesi nykyiset asetukset tai peruuta asettaaksesi "
-"internet- ja verkkoasetukset uudelleen.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Tervetuloa verkon asettamisvelhoon\n"
-"\n"
-"Seuraavassa vaiheessa määritellään sinun internet- / verkkoasetukset.\n"
-"Jos et halua käyttää automaattista tunnistusta, poista kyseinen valinta.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Valitse uusi asetusprofiili"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Käytä automaattista tunnistusta"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Etsin laitteita...."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Tavallinen modeemiyhteys"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "löydetty portista %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN-yhteys"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "löydetty %s:sta"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Lähiverkko"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "löydetty seuraavasta liitännästä: %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Kaapeliyhteys"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Kaapeliyhteys"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "Lähiverkko"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "seuraavat ethernet-verkkokortit löydetty"
-
-#: ../../network/netconnect.pm_.c:190
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Valitse haluamasi työkalu"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:215
-#, fuzzy
-msgid "Internet connection"
-msgstr "Internetyhteyden jakaminen"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Haluatko ottaa yhteyden koneen käynnistyksen yhteydessä?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Verkon asetukset"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Ongelma käynnistettäessä verkkoa uudelleen: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Onnittelut, verkko- ja internetyhteyksien asetus valmis.\n"
-"\n"
-"Asetukset tulevat käyttöön myös itse järjestelmässä.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Kun tämä on tehty, suosittelemme käynnistämään X-ympäristön\n"
-"uudelleen välttääksesi järjestelmän nimen vaihdoksesta tulevat ongelmat."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"VAROITUS: Tämä laite on aikaisemmin määritelty internetyhteyden ottoon.\n"
-"Hyväksy, jos haluat pitää laitteen asetukset sellaisina, kun ne olivat.\n"
-"Alla olevien kohtien muokkaaminen korvaa voimassa olevat asetukset."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Anna koneen IP-asetukset. Kukin kohta tulee syöttää IP-osoitteena,\n"
-"pisteillä eroteltuna nelinumeroisena lukuna (esim. 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Asetan verkkolaitetta %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (ajuri %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP-osoite"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Verkkopeite"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Automaattinen IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-osoitteen tullee olla muotoa 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Syötä koneesi nimi.\n"
-"Koneesi nimen pitäisi olla täydellinen, kuten ``minunkone.yritys.fi''.\n"
-"Voit antaa myös yhdyskäytävän IP.osoitten jos sinulla on sellainen."
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "Nimipalvelin"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Yhdyskäytävä"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Yhdyskäytävän laite"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Proxyjen asettaminen"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP-välityspalvelin:"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP-välityspalvelin:"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Välityspalvelimen tulee olla muotoa http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Välityspalvelimen tulee olla muotoa ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Internetin asetukset"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Haluatko kokeilla internetyhteyttä nyt?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Testaan yhteyttäsi..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Järjestelmä on nyt internetissä."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Turvallisuussyistä yhteys suljetaan nyt."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Järjestelmä ei näytä olevan internetissä.\n"
-"Yritä muuttaa internet-asetuksia."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Yhteyden asetus"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Valitse alla olevista kohdista"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "Kortin IRQ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Kortin muisti (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "Kortin IO"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "Kortin IO_0"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "Kortin IO_1"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Henkilökohtainen puhelinnumerosi"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Palveluntarjoajan nimi (esim: tarjoaja.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Palveluntarjoajan puhelinnumero"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "Yhteydentarjoajan dns 1 (vapaaehtoinen)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "Yhteydentarjoajan dns 2 (vapaaehtoinen)"
-
-# Asennuksen sivuvalikko
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "Näppäimistön valinta"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Soittotila"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-#, fuzzy
-msgid "Connection speed"
-msgstr "Yhteyden nimi: "
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Yhteyden nimi: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Käyttäjätunnus (käyttäjän nimi)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Salasana"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Laajennettua osiotyyppiä ei ole tuettu tässä ympäristössä"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Sinulla on reikä osiotaulussasi eikä sitä voida käyttää.\n"
-"Ainoa ratkaisu on siirtää primääriosioita siten että reikä on ennen "
-"laajennettuja osioita"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Palautus tiedostosta %s epäonnistui: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Huono varmuuskopiotiedosto"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Virhe kirjoitettaessa tiedostoon %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Jotakin kamalaa on tapahtunut kiintolevyllesi.\n"
-"Tiedon oikeellisuuden tarkistus epäonnistui.\n"
-"Kaikki asemalle kirjoitettu tieto muuttuu tunnistamattomaksi"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "pakollinen"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "tärkeä"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "erittäin hyvä"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "hyvä"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ehkä"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Paikallinen kirjoitin"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Ulkoinen kirjoitin"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Ulkoinen CUPS-palvelin"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Ulkoinen lpd-palvelin"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Verkkokirjoitin (socket)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Tulostuspalvelin"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Kirjoitinlaitteen osoite (URI)"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(moduli %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Valitse kirjoitinyhteys"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Miten kirjoitin on liitetty?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"Ulkoisella CUPS-palvelimella sinun ei tarvitse määrittää\n"
-"kirjoittimen tyyppiä; kaikki kirjoittimet tunnistuvat automaattisesti.\n"
-"Jos epäilet, valitse \"Ulkoinen CUPS-palvelin\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-#, fuzzy
-msgid "None"
-msgstr "Valmis"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Valitse oletuskäyttäjä:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Sulje"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "Ulkoinen kirjoitin"
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-osoitteen tullee olla muotoa 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Portin numeron pitäisi olla numeerinen"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "Paikallinen kirjoitin"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "CUPS-palvelimen IP"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Portti"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Käynnistyksen tavan asetus"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Etsin laitteita...."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Kokeile portteja"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Mallia \"%s\" oleva kirjoitin löydettiin "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Paikallinen kirjoitin"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Mihin laitteeseen kirjoitin on kytketty  \n"
-"(huomaa, että /dev/lp0 vastaa LPT1:tä)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Kirjoitinlaite"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Luetaan CUPS-ajurien tietokantaa..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Ulkoisen lpd-palvelimen kirjoittimen parametrit"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Jotta voisit käyttää palvelimen lpd-tulostusjonoja, sinun\n"
-"tulee syöttää tulostuspalvelimen ja jonon nimi jolle työt\n"
-"siirretään."
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "Palvelimen nimi"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Ulkoinen kirjoitin"
-
-#: ../../printerdrake.pm_.c:320
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Palvelimen nimi"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Palvelimen nimi"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) -kirjoittimen parametrit"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"SMB-palvelimen kirjoittimelle tulostaaksesi sinun pitää syöttää\n"
-"SMB-koneen nimi (joka ei aina ole sama kuin koneen TCP/IP nimi)\n"
-"ja mahdollisesti tulostuspalvelimen IP-osoite, kirjoittimen jakonimi\n"
-"sekä soveltuva käyttäjätunnus, salasana ja työryhmä-tieto."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "SMB-palvelimen nimi"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "SMB-palvelimen IP"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Jakonimi"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Työryhmä"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "NetWare-palvelimen kirjoittimen parametrit"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"NetWare-palvelimen kirjoittimelle tulostaaksesi sinun pitää syöttää\n"
-"NetWare-palvelinkoneen nimi (joka ei aina ole sama kuin koneen TCP/IP nimi)\n"
-"ja mahdollisesti tulostusjonon nimi sille kirjoittimelle, jota haluat\n"
-"käyttää, sekä soveltuva käyttäjätunnus ja salasana."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Tulostuspalvelin"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Tulostusjonon nimi"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Verkkokirjoittimen optiot (socket)"
-
-#: ../../printerdrake.pm_.c:528
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Tulostaaksesi verkkokirjoittimella (socket), sinun täytyy\n"
-"antaa kirjoittimen verkkonimi ja mahdollisesti portin numero."
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "Kirjoitinlaitteen verkkonimi"
-
-#: ../../printerdrake.pm_.c:537
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Kirjoitinlaitteen verkkonimi"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Kirjoitinlaitteen osoite (URI)"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Kirjoittimen nimi"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Kuvaus"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Paikka"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Luetaan CUPS-ajurien tietokantaa..."
-
-#: ../../printerdrake.pm_.c:793
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Kirjoitinyhteys"
-
-#: ../../printerdrake.pm_.c:794
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Mikä kirjoitin sinulla on?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Internetin asetukset"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Internetin asetukset"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Haluatko kokeilla tulostusta?"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "Kokeile portteja"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-#, fuzzy
-msgid "No test pages"
-msgstr "Kyllä, tulosta molemmat sivut"
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "Kirjoitin"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standardi"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Tulostan testisivua..."
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "Tulostan testisivua..."
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Tulostan testisivua..."
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testisivu on lähetetty tulostuspalvelimelle.\n"
-"Voi kestää hetken ennenkuin tulostus alkaa.\n"
-"Tulostuksen tila:\n"
-"%s\n"
-"\n"
-"Toimiko tulostus oikein?"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testisivu on lähetetty tulostuspalvelimelle.\n"
-"Voi kestää hetken ennenkuin tulostus alkaa.\n"
-"Toimiko tulostus oikein?"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Ei kirjoitinta"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Ajan alas verkkoa"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "Kirjoittimen asetukset"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Luetaan CUPS-ajurien tietokantaa..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Internetin asetukset"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Tulostimen nimi saa sisältää vain kirjaimia, numeroita ja alaviivan"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "Ei kirjoitinta"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Luetaan CUPS-ajurien tietokantaa..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Käynnistän yhteyttä..."
-
-# Asennuksen sivuvalikko
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Verkkoasetukset"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Näyttöä ei ole asetettu"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Asetan verkkoa"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Mitä tulostusjärjestelmää haluat käyttää?"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Korkea"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoidi"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Mitä tulostusjärjestelmää haluat käyttää?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Valitse kirjoitinyhteys"
-
-#: ../../printerdrake.pm_.c:1728
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Mitä tulostusjärjestelmää haluat käyttää?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Aseta kirjoitin"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Kirjoittimen asetukset"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Luetaan CUPS-ajurien tietokantaa..."
-
-#: ../../printerdrake.pm_.c:1845
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Haluatko asettaa kirjoittimen?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Perustila"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Oletus)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Ulkoinen CUPS-palvelin"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "Ulkoinen CUPS-palvelin"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-#, fuzzy
-msgid "Add printer"
-msgstr "Ei kirjoitinta"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Haluatko kokeilla asetuksia?"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Internetin asetukset"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Internetyhteyden jakaminen"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Kirjoitinyhteys"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "Tulostan testisivua..."
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "Ulkoinen kirjoitin"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Luetaan CUPS-ajurien tietokantaa..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Haluatko käynnistää verkon uudelleen"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Luetaan CUPS-ajurien tietokantaa..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Proxyjen asettaminen"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Portti"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Välityspalvelimen tulee olla muotoa http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "Portin numeron pitäisi olla numeerinen"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Välityspalvelimen tulee olla muotoa ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Automaattinen kirjautuminen"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Salasana"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Ei salasanaa"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Salasanat poikkeavat toisistaan"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "En voi lisätä osiota _alustetulle_ RAID:lle md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "En voi kirjoittaa tiedostoa %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid epäonnistui"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid epäonnistui (ehkä raid-työkalut puuttuvat?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ei riittävästi osioita RAID tasolle %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Käynnistä ALSA (Advanced Linux Sound Architecture) äänijärjestelmä"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron on jaksottainen komentojen ajastaja."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd:ta käytetään valvomaan paristojen tilaa ja raportoimaan siitä syslogin\n"
-"kautta. apmd:tä voidaan myös käyttää sulkemaan kone patterien ollessa tyhjiä."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Ajaa komentoja määrätyillä ajanhetkillä, jotka on määritelty at-komennolla.\n"
-"Ajaa myös eräajoja, kun järjestelmän kuormitus on riittävän matala."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron on UNIX:n perusohjelma joka ajaa määriteltyjä ohjelmia määrätyillä\n"
-"ajanhetkillä. vixie cron lisää monia omianisuuksia verrattuna normaaliin\n"
-"UNIX:n cron ohjelmaan, kuten paremman turvallisuuden ja laajemmat asetukset."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM lisää hiirituen tekstipohjaisiin Linux-sovelluksiin kuten Midnight\n"
-"Commander. GPM mahdollistaa myös leikkaa/liimaa toiminnot hiirellä,\n"
-"ja sisältää tuen valikoille konsolissa."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache on WWW-palvelin. Palvelinta käytetään jakamaan HTML-\n"
-"tiedostoja ja ajamaan CGI-ohjelmia."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet pääpalvelin (yleensä inetd) käynnistää useita eri\n"
-"internet palveluita tarpeen mukaan. Palvelin käynnistää useita\n"
-"palveluita, kuten telnet, ftp, rsh ja rlogin. inetd:n poistaminen\n"
-"poistaa myös nämä palvelut käytöstä."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Paketti lataa valitun näppäinkartan /etc/sysconfig/keyboard\n"
-"tiedoston asetusten mukaisesti.  Asetukset voidaan valita kbdconfig "
-"työkalulla.\n"
-"Tämä tulisi ottaa käyttöön lähes kaikissa järjestelmissä."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd on tulostuspalvelin, jonka lpr ohjelma vaatii toimiakseen.\n"
-"lpd on palvelin joka jakaa tulostustöitä kirjoittimille."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) on nimipalvelin (DNS) jota käytetään selvittämään\n"
-"koneen nimiä sekä IP-osoitteita."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Liittää ja irroittaa NFS (Network File System), SMB (Lan\n"
-"Manager/Windows) ja NCP (NetWare) liitospaikat."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivoi/Poistaa kaikki verkkoliittymät jotka on asetettu\n"
-"käynnistyksessä."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS on yleinen protokolla tiedostojen jakoon TCP/IP-\n"
-"verkoissa. Tämä palvelu mahdollistaa NFS-palvelimen\n"
-"käynnistyksen, jakoa ohjataan tiedostosta /etc/exports."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS on yleinen protokolla tiedostojen jakoon TCP/IP-\n"
-"verkoissa. Tämä palvelu mahdollistaa NSF-tiedostolukot."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMIA tukea käytetään yleensä kannettavissa ethernet- ja modeemi-\n"
-"korttien tukemiseen. Palvelu ei käynnisty ellei sitä ole asetettu, joten\n"
-"sen voi asentaa myös koneisiin jotka eivät sitä tarvitse."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper hallitsee RPC-yhteyksiä, joita käyttävät esimerkiksi\n"
-"NFS ja NIS-protokollat. portmap-palvelin on oltava käynnissä\n"
-"järjestelmissä jotka haluavat tarjota näitä protokollia."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix on sähköpostinvälitysohjelma, eli ohjelma joka\n"
-"välittää postia koneelta toiselle."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Tallentaa ja palauttaa järjestelmän satunnaislukualtaan, tämä parantaa\n"
-"satunnaislukujen laatua."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed-palvelin mahdollistaa automaattiset IP-reititystaulun päivitykset\n"
-"RIP-protokollalla. Vaikka RIP-protokolla on paljon käytetty pienissä "
-"verkoissa,\n"
-"monimutkaisemmat verkot vaativat parempia reititysprotokollia."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstart-protokolla mahdollistaa verkkokäyttäjille\n"
-"eri koneiden tilatietojen haun."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers-protokolla verkon käyttäjille mahdollisuuden tunnistaa, ketkä\n"
-"ovat sisällä eri koneissa."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho-protokollalla etäkäyttäjät voivat listata kaikki koneella\n"
-"olevat käyttäjät (vastaa fingeriä)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Käynnistä äänijärjestelmä tietokoneessasi"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog on tapa jolla monet palvelimet kirjottavat viestinsä talteen\n"
-"useisiin lokitiedostoihin.  On järkevää käyttää syslog-ohjelmaa."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:88
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Käynnistää ja pysäyttää X kirjasinpalvelimen käynnistyksessä ja lopetuksessa"
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Valitse mitkä palvelut käynnistetään automaattisesti"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "Kirjoitin"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "Järjestelmän tila"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Ulkoisen lpd-palvelimen kirjoittimen parametrit"
-
-# ../../share/compssUsers
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Tietokanta"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "laite"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "käynnissä"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "pysähtynyt"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Palvelut ja demonit"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Ei lisätietoja\n"
-"tälle palvelulle."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Käynnistyksen yhteydessä"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Asennan pakettia %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Osiotaulua ei voida lukea, siinä on liikaa virheitä :(\n"
-"Taulu yritetään korjata nollaamalla se"
-
-#: ../../standalone/drakautoinst_.c:44
-#, fuzzy
-msgid "Error!"
-msgstr "Virhe"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Asennuksen jälkeiset toiminnot"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Käynnistyksen tavan asetus"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Onnittelut!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Internetyhteyden jakaminen"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetyhteyden jakaminen on käytössä"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetyhteyden jakaminen on jo asetettu.\n"
-"Sen nykyinen tila on: käytössä.\n"
-"\n"
-"Mitä haluat tehdä?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "poista käytöstä"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "lopeta"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "aseta uudelleen"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Poistan palvelut käytöstä..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Internetyhteyden jakaminen ei ole enää käytössä."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internetyhteyden jakaminen ei ole käytössä"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetyhteyden jakaminen on jo asetettu.\n"
-"Sen nykyinen tila on .ei käytössä\n"
-"\n"
-"Mitä haluat tehdä?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "ota käyttöön"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Otan palvelut käyttöön.."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Internetyhteyden jakaminen on nyt käytössä."
-
-#: ../../standalone/drakgw_.c:182
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Valmistellaan internetyhteyden jakamista.\n"
-"\n"
-"Huomaa: tarvitset verkkokortin asettaaksesi paikallisverkon."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Liittymä %s (käyttäen moduulia %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Liittymä %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Koneessasi ei ole verkkokorttia!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Koneestasi ei löytynyt yhtään verkkokorttia. Aja laitteistonhakutyökalu."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Verkkoliittymä"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Tietokoneessasi on vain yksi verkkokortti:\n"
-"\n"
-"%s\n"
-"\n"
-"Valmistaudun asettamaan lähiverkkosi asetukset kyseiselle laitteelle."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Valitse verkkokortti, joka on kytketty paikallisverkkoon."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Varoitus. Verkkokortti on jo asetettu. Uudet asetukset korvaavat vanhat."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Mahdollinen lähiverkon osoitetörmäys löydetty nykyisillä asetuksilla %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Palomuuri löydetty!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Varoitus! Olemassaoleva palomuuri löydetty. Tarvitset mahdollisesti käsin "
-"tehtäviäkorjauksia asennuksen jälkeen."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Määrittelen..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Määrittelen komentotiedostot, asennan ohjelmistot, käynnistän palvelimet..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Asennan pakettia %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Kaikki asetettu.\n"
-"Voit nyt jakaa internetyhteyden muiden lähiverkon koneiden kanssakäyttämällä "
-"automaattista lähiverkon määrittelyä (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Asetukset on jo tehty, mutta ne ovat tällä hetkellä poistettu käytöstä."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Asetukset on jo tehty ja ne ovat käytössä."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Internetyhteyden jakamista ei ole koskaan asetettu."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Internetyhteyden jakamisen asetukset"
-
-#: ../../standalone/drakgw_.c:631
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Tervetuloa internetyhteyden jakamisen apuohjelmaan!\n"
-"\n"
-"%s\n"
-"\n"
-"Paina \"Ok\", jos haluat käynnistää asennusohjelman."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Verkon asetukset (%d-laitteille)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profiili: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Poista profiili..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Valitse poistettava profiili:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Uusi profiili..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Koneen nimi:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Internetyhteys"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Tyyppi:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Yhdyskäytävä:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Liitäntä:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Tila:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Yhteys muodostettu"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Ei yhteyttä"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Yhdistä..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Katkaise yhteys..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Käynnistän yhteyttä..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Katkaisen yhteyden..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Yhteyttä ei olla katkaistu.\n"
-"Voit yrittää katkaista yhteyden käsin kirjoittamalla:\n"
-"etc/sysconfig/network-scripts/net_cnx_down\n"
-"ollessasi roottina."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Yhteys internettiin on nyt katkaistu."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Määrittele internetyhteys..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "Lähiverkon asetukset"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Ajurit"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Liitäntä"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protokolla"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "State"
-msgstr "Tila:"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Aseta paikallisverkko..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Odota hetki... Otetaan asetukset käyttöön"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "Lähiverkon asetukset"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Laite %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Käynnistysprotokolla"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Käynnistetty koneen käynnistämisen yhteydessä"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP-asiakas"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "activate now"
-msgstr "Aktiivinen"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "desactivate now"
-msgstr "Aktiivinen"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Internetyhteyden asetus"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Internetyhteyden asetus"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Yhteyden nimi: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parametrit"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Verkkokortti"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP-asiakas"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Tervetuloa murtautujat"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Huono"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoidi"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Tätä tasoa tulee käyttää varoen. Se tekee järjestelmästäsi helpomman "
-"käyttää,\n"
-"mutta hyvin herkän: sitä ei tule käyttää koneessa joka on kytketty muihin "
-"koneisiin\n"
-"tai Internettiin. Koneessa ei ole salasanoja."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Salasanat ovat nyt käytössä mutta koneen käyttö verkossa ei ole suositeltua."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Muutamia parannuksia tällä turvaasolla, suurimpana se että järjestelmässä\n"
-"on enemmän turvallisuusvaroituksia ja tarkistuksia."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Tämä on normaaliturvallisuustaso jota suositellaan tietokoneelle jota\n"
-"käytetään Internettiin liitettynä. Järjestelmässä on "
-"turvallisuustarkastuksia."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Tällä turvallisuustasolla järjestelmän käyttö palvelimena on mahdollista.\n"
-"Järjestelmää voidaan käyttää palvelimena joka hyväksyy yhteyksiä monilta\n"
-"asiakkailta. "
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Systeemi on nyt täysin suljettu.\n"
-"Turvallisuusasetukset ovat tiukimmillaan."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "Asetan turvatasoa"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Valitse optioita palvelimelle"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Asetan turvatasoa"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrollipaneeli"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Valitse haluamasi työkalu"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "käyttö: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Haluatko BackSpace-näppäimen toimivan kuten Delete konsolissa?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Vaihda CD-levyä"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Aseta asennuslevy CD-asemaan ja paina Ok.\n"
-"Jos sinulla ei ole levyä, paina Peruuta estääksesi järjestelmän päivityksen."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Järjestelmän päivitystä ei voida aloittaa!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "serial_usb:ta ei löytynyt\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Emuloi kolmatta näppäintä?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Palomuurin asetukset"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Palomuurin asetukset"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Palomuurin asettaminen\n"
-"\n"
-"Olet jo määritellyt palomuurin. Paina \"Määrittele\" \n"
-"poistaaksesi palomuurin tai muuttaaksesi sen asetuksia"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Palomuurin asettaminen\n"
-"\n"
-"Paina \"Määrittele\" pystyyttääksesi palomuurin"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Kieliasetukset"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Asennuksen luokka"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Kiintolevyjen tunnistus"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Hiiren määrittely"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Näppäimistön valinta"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Tietoturva"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Tiedostojärjestelmät"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Levyjen osiointi"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Asennettavat paketit"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Asenna järjestelmä"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Käyttäjien lisääminen"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Verkkoasetukset"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Palvelujen asettaminen"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Käynnistyslevyke"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Lataajan asetus"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X:n asentaminen"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Lopeta asennus"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewallin asettaminen\n"
-"\n"
-"Tämä vaihe asettaa henkilökohtaisen palomuurin Mandrake Linux\n"
-"-järjestelmääsi. Mikäli haluat tehokkaan palomuuriratkaisun, hae\n"
-"lisätietoja MandrakeSecurity Firewall distribuutiosta."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Tässä vaiheessa kysytään mitä palveluita haluat haluat sallia muille\n"
-"internetin käyttäjille siksi aikaa kun tietokoneesi on internetissä. \n"
-"Harkitse huolellisesti, ennen kuin vastaat näihin kysymyksiin,\n"
-"sillä nämä vaikuttavat tietokoneesi tietoturvaan.\n"
-"\n"
-"Jos et käytä tällä hetkellä ainoatakaan seuraavista palveluista,\n"
-"suojaa tietokoneesi palomuurilla. Voit muuttaa näitä asetuksia milloin \n"
-"haluat vain käynnistämällä tämän ohjelman uudelleen."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Onko tietokoneessasi webbisivuja, joiden haluat näkyvän kaikkialle\n"
-"internettiin? Jos ajat webbipalvelinta, jonka tarvitsee näkyä väin\n"
-"omalle tietokoneellesi, voit turvallisesti vastata EI tähän kysymykseen.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Haluatko koneesi toimivan nimipalvelimena? Jos et halua pystyttää \n"
-"nimipalvelinta  jakamaan IP- ja vyöhyketietoja internettiin, vastaa ei.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Haluatko sallia koneellesi tulevat Secure Shell (ssh) -yhteydet? Tämä\n"
-"on telnetin korvaava palvelu, jota voit käyttää kirjoittautuaksesi sisään\n"
-"internetin kautta. Jos käytät vielä telnetiä, sinun pitäisi vaihtaa se \n"
-"ssh:iin. Telnet-yhteydet eivät ole suojattuja -- hyökkääjä voi varastaa\n"
-"salasanasi, jos käytät sitä. Ssh-yhteys on sitävastoin suojattu, joten\n"
-"kukaan ei pysty salakuuntelemaan sitä."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Haluatko sallia sisään tulevat telnet-yhteydet?\n"
-"Tämä on hirvittävän vaarallista, kuten edellinen kohta osoitti.\n"
-"Suosittelemme että vastaisit Ei tähän kohtaan ja käyttäisit\n"
-"telnetin sijaan ssh:ta.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Ajatko tietokoneellasi FTP-palvelinta, jonka haluat näkyvän myös\n"
-"internettiin? Jos vastasit kyllä, suosittelemme, että käyttäisit sitä\n"
-"vain anonyymeihin siirtoihin. Mikä tahansa salasana voidaan varastaa,\n"
-"mikäli se siirretään FTP-protokollan kautta, sillä FTP ei suojaa\n"
-"siirrettäviä salasanoja.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Toimiiko tietokoneesi postipalvelimena? Jos lähetät sähköpostiviestisi\n"
-"pinen, muttin tai minkä tahansa tekstipohjaisen postinlukuohjelmiston\n"
-"avulla, se on todennäköistä. Muussa tapauksessa sinun pitäisi suojata\n"
-"ominaisuus pois palomuurin avulla.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Ajatko POP- tai IMAP-palvelinta koneellasi? Näitä palvelimia\n"
-"käytetään ylläpitämään ei-webbipohjaisia sähköpostitunnuksia\n"
-"ihmisille, jotka haluavat hakea postinsa tältä koneelta omillensa.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Käytät 2.2-sarjan Linuxin ydintä. Jos internetosoite (IP),\n"
-"jota tietokoneesi käyttää, asetetaan automaattisesti\n"
-"toisesta kotonasi tai työpaikallasi olevasta tietokoneesta\n"
-"(eli se on dynaamisesti määrätty), ominaisuuden käyttö \n"
-"pitää sallia. Pitääkö paikkaansa?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Onko tietokoneesi kello synkronoitu toisen tietokoneen kanssa?\n"
-"Useimmiten tätä ominaisuutta käytetään keskisuurissa Unix/Linux\n"
-"-organisaatioissa esimerkiksi lokin synkronointiin. Jos tietokoneesi\n"
-"ei ole osa suurempaa toimistoa tai et ole kuullut tällaisesta, \n"
-"järjestelmä ei luultavasti ole synkronoitu."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Asetukset tehty. Kirjoitetaanko muutokset levylle?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "En voi avata %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Tiedostoa %s ei voi avata kirjoittamista varten: %s\n"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Verkkopääte (asiakas)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-, SMB-, SSH- ja välipalvelin"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Toimistosovellukset"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome-työasema"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Työkalut Palm Pilotin tai Visorin liittämiseksi"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Työasema"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Palomuuri / Reititys"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Nimipalvelin ja tietoverkon informaatiopalvelin"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Office-ohjelmistot: tekstinkäsittely (kword, abiword), taulukkolaskenta "
-"(kspread,gnumeric), pdf-lukijat jne"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Äänenkäsittely: mp3, midi, mikserit, jne"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Kirjoja ja ohjeita Linuxista sekä vapaan lähdekoodin ohjelmista"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE-työasema"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, jne"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Kokoelma työkaluja sähköpostiin, nyytisiin, webiin, tiedostonsiirtoon ja "
-"jutusteluun"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Tietokanta"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL tai MySQL tietokantapalvelin"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Työkalut, jotka helpottavat tietokoneesi asetusten muokkaamista"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Ääni"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Apuohjelmat"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentaatio"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Komentorivityökalut"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix-postipalvelin, Inn-nyytispalvelin"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet-asema"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedia-asema"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Lähiverkon asetukset"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Lisää graafisia työpöytiä (Gnome, IceWM)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K-työpöytäympäristö. Graafinen perusympäristö ja sen mukana tulevat työkalut"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Graafinen ympäristö"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Kehitysympäristö"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache WWW-palvelin ja Pro-ftpd FTP-palvelin"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Työkalut CD:iden luomiseen ja polttamiseen"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Toimistotyöasema"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, jne"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafiikkaohjelmistot, kuten Gimp"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C ja C++ ohjelmointityökalut, kirjastot ja include-tiedostot"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Verkkotietokone (palvelin)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Sähköposti/Groupware/Nyytiset"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Pelikone"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videon katselu ja editointi"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafiikka"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Pelit: tasohyppely, korttipelit, strategia, jne"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Valikoima työkaluja sähköpostin ja nyytisten lukemiseen (pine, mutt, tin...) "
-"sekä internetissä surffailuun"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Varmuuskopiointi, emulaattorit, järjestelmän tarkkailu"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Henkilökohtainen kirjanpito"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Graafinen ympäristö käyttäjäystävällisellä ohjelmistolla ja työkaluilla."
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Asiakasohjelmat eri protokollille (ssh jne)"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internetyhdyskäytävä"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Äänen sekä videon soitto- ja editointiohjelmat"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Muut graafiset käyttöympäristöt"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editorit, komentotulkit, tiedostotyökalut, terminaalit"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Tilinpito-ohjelmia, kuten gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Pelit"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Henkilökohteisen tiedon hallinta"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD:n poltto"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Tieteelliinen työasema"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "ei voi lukea tiedostoa /etc/sysconfig/autologin: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Haluatko käynnistää verkon uudelleen"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Hyväksytkö?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Uudelleenkäynnistetään verkkokorttia:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Käynnistän verkkolaitteen %s uudelleen. Haluatko jatkaa?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Jos et tiedä tarkemmin, niin yleinen valinta on \"/dev/hda\"\n"
-#~ "(primäärinen master IDE-levyn ).tai \"/dev/sda\" (ensimmäinen SCSI-levy)."
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Tässä ovat tulostusjonot.\n"
-#~ "Voit lisätä uusia tai muuttaa olemassaolevia."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Yhteyden nimi: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Valitse oletuskäyttäjä:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Testaa hiiri"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Valitse haluttu kieli asennukseen ja järjestelmän käyttöön."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Jatkaaksesi asennusta sinun täytyy hyväksyä yllä olevan lisenssin ehdot.\n"
-#~ "\n"
-#~ "\n"
-#~ "Valitse \"Hyväksy\", jos hyväksyt ehdot.\n"
-#~ "\n"
-#~ "\n"
-#~ "Valitse \"Kieltäydy\", jos et hyväksy ehtoja. Tällöin asennus päättyy "
-#~ "muuttamatta nykyisiä asetuksia."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Valitse näppäinasettelu allaolevasta listasta"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Jos haluat asennuksen jälkeen vaihtaa järjestelmän käyttämää kieltä\n"
-#~ "(asennuksen alussa valitsemiesi lisäksi), valitse ne ylläolevasta "
-#~ "listasta.\n"
-#~ "Jos haluat valita kaikki, sinun ei tarvitse valita muita kuin \"Kaikki\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Valitse:\n"
-#~ "\n"
-#~ "  - Mukautettu: Jos tunnet GNU/Linuxin ennestään, voit valita erikseen "
-#~ "koneen käyttötarkoituksen.\n"
-#~ "    Katso alta lisätietoja.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Asiantuntija: Valinta edellyttää, että tunnet GNU/Linuxin ennestään "
-#~ "hyvin ja haluat tehdä\n"
-#~ "    erittäin mukautetun asennuksen. Myös tässä luokassa voit valita "
-#~ "koneesi käyttötarkoituksen.\n"
-#~ "    Mutta älä valitse tätä, JOS ET TODELLA TIEDÄ MITÄ OLET TEKEMÄSSÄ!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Sinun tulee nyt valita koneesi ensisijainen käyttötarkoitus. Valinnat "
-#~ "ovat:\n"
-#~ "\n"
-#~ "* Työasema: ideaali valinta, jos aiot käyttää tietokonettasi "
-#~ "jokapäiväisissä tehtävissä, joko työpaikalla\n"
-#~ "  tai kotona.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Kehitysympäristö: hyvä valinta, jos aiot käyttää tietokonettasi "
-#~ "ensisijaisesti ohjelmistokehitykseen.\n"
-#~ "  Tämän asennuksen myötä sinulla on täydellinen valikoima työkaluja niin "
-#~ "kääntämiseen, debuggaamiseen,\n"
-#~ "lähdekoodin muotoiluun kuin ohjelmistopakettien tekoon.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Palvelin: jos aiot käyttää tätä tietokonetta internet-palvelimena, tämä "
-#~ "valinta on paras mahdollinen.\n"
-#~ "Vaihtoehtoja ovat mm: tiedostopalvelin (NFS, SBM), tulostuspalvelin "
-#~ "(Unix- tai Microsoft Windows -tyyppinen),\n"
-#~ "autentikointipalvelin (NIS), tietokantapalvelin ja niin edelleen. "
-#~ "Graafisiakäyttöliittymiä ei asenneta oletuksena."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Voit nyt valita ne ohjelmistoryhmät, jotka haluat asentaa tai päivittää.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tämän vaiheen jälkeen DrakX tarkistaa, onko sinulla tarpeeksi vapaata "
-#~ "tilaa\n"
-#~ "niiden kaikkien asentamiseksi. Jos ei, niin ohjelma varoittaa sinua "
-#~ "siitä. Jos\n"
-#~ "haluat siitä huolimatta jatkaa, DrakX jatkaa asennusvaiheeseen, mutta "
-#~ "jättää\n"
-#~ "asentamatta joitakin vähemmän tärkeitä paketteja. Listan lopusta voit "
-#~ "valita\n"
-#~ "myös vaihtoehdon \"Yksittäisten pakettien valinta\", minkä jälkeen voit\n"
-#~ "asentaa haluamasi yksittäiset ohjelmistopaketit yli tuhannesta "
-#~ "vaihtoehdosta."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Voit nyt valita yksittäin kaikki ne paketit, jotka haluat asentaa.\n"
-#~ "\n"
-#~ "\n"
-#~ "Voit laajentaa tai pienentää puuta painamalla valintanappia paketti-"
-#~ "ikkunan \n"
-#~ "vasemmasta kulmasta.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jos haluat mieluummin valita paketit aakkosjärjestyksessä olevasta \n"
-#~ "listasta, paina ikonia \"Vaihda tasaisen ja ryhmäjärjestyksen välillä\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Jos et halua, että sinua varoitetaan pakettien riippuvuussuhteista, "
-#~ "valitse \n"
-#~ "\"Näytä automaattisesti valitut paketit\". Huomaa, että tällöin "
-#~ "poistamalla yhden \n"
-#~ "paketin voit huomaamattasi poistaa useita muitakin paketteja, jotka \n"
-#~ "ovat riippuvaisia poistetusta paketista."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Jos sinulla on kaikki ylläolevan listan CD:t, paina Ok.\n"
-#~ "Jos sinulla ei ole yhtään em. levyistä, paina Peruuta.\n"
-#~ "Jos vain jotkin levyistä puuttuvat, poista niiden valinnat, ja paina Ok"
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Jos haluat yhdistää tietokoneesi internettiin tai paikalliseen "
-#~ "lähiverkkoon,\n"
-#~ "valitse haluamasi optio. Kytke kuitenkin kyseinen laite päälle, ennen "
-#~ "kuin\n"
-#~ "valitset, sillä tällöin DrakX voi tunnistaa laitteen automaattisesti.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jos sinulla ei ole internetliittymää tai lähiverkkoa, valitse \"Kytke "
-#~ "pois\n"
-#~ "verkkoyhteydet\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Jos haluat asettaa verkkoyhteydet myöhemmin tai olet jo asettanut\n"
-#~ "koneesi verkkoasetukset, valitse \"Valmis\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Modeemia ei löydetty. Valitse sarjaportti, johon modeemi on kytketty.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tiedoksi: ensimmäinen sarjaportti (\"COM1\" Microsoft Windowsissa)\n"
-#~ "on \"ttyS0\" Linuxissa."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Voit nyt antaa soiton asetukset. Jos et tiedä tai et ole varma, mitä\n"
-#~ "sinun pitäisi kirjoittaa tähän, saat oikeat tiedot internetyhteyden\n"
-#~ "palveluntarjoajaltasi. Jos et anna DNS (nimipalvelu) -tiedoja,\n"
-#~ "ne haetaan internetyhteyden tarjoajaltasi yhteyttä muodostettaessa."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Jos modeemisi on ulkoinen, kytke se päälle nyt, jotta DrakX "
-#~ "tunnistaisisen automaattisesti."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Kytke modeemisi päälle ja valitse oikea vaihtoehto."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Jos et ole varma, että yllä olevat tiedot ovat\n"
-#~ "oikeita tai jos et ole varma, mitä sinun pitäisi kirjoittaa,\n"
-#~ "saat oikeat tiedot omalta internet-palveluntarjoajaltasi.\n"
-#~ "Jos et syötä DNS-tietoja (nimipalvelin) tänne, tuo tieto\n"
-#~ "saadaan palveluntarjoajalta yhteydenoton aikana."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Voit antaa nyt koneesi nimen, jos haluat. Jos et ole\n"
-#~ "varma, mitä sinun pitäisi kirjoittaa tähän, oikeat tiedot saat\n"
-#~ "omalta internet-palveluntarjoajaltasi."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Voit nyt asettaa verkkokorttisi.\n"
-#~ "\n"
-#~ "   - IP-osoite: jos et tiedä osoitetta, voit kysyä sitä "
-#~ "verkkoylläpitäjältäsi.\n"
-#~ "     Sinun ei pidä syöttää IP-osoitetta, jos valitset \"Automaattinen IP"
-#~ "\" alta.\n"
-#~ "\n"
-#~ "  - Verkkopeite: \"255.255.255.0\" on yleensä hyvä valinta. Jos et ole "
-#~ "täysin\n"
-#~ "     varma verkkopeitteestä, voit kysyä sitä verkkoylläpitäjältäsi.\n"
-#~ "\n"
-#~ "  - Automaattinen IP: Jos verkkosi käyttää BOOTP- tai DHCP-protokollaa,\n"
-#~ "     valitse tämä optio. Jos valitset tämän, kohtaa \"IP-osoite\" ei "
-#~ "tarvitse täyttää.\n"
-#~ "     Jos et ole varma, pitäisikö sinun valita tämä vaihtoehto, kysy "
-#~ "verkkoylläpitäjältäsi."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Voit nyt kirjoittaa koneesi nimen. Jos et tiedä, mitä\n"
-#~ "sinun pitäisi kirjoittaa, kysy lisää verkkoylläpitäjältäsi."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Voit nyt kirjoittaa koneesi nimen. Jos et ole varma,\n"
-#~ "mitä sinun pitäisi kirjoittaa, jätä tämä kohta tyhjäksi."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Voit antaa nyt soittoyhteyden asetukset. Jos et ole varma mitä kenttiin\n"
-#~ "kirjotetaan oikeat tiedot saat Internet palveluntarjoajaltasi."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Jos käytät välityspalvelimia aseta ne nyt. Jos et tiedä käytätkö\n"
-#~ "välityspalvelimia kysy verkkoylläpitäjältäsi tai Internet\n"
-#~ "palveluntarjoajaltasi."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Voit asentaa kryptograafiset ohjelmistot jos internetyhteytesi on luotu\n"
-#~ "oikein. Valitse ensiksi peilijärjestelmä, jota haluat käyttää ja valitse "
-#~ "sitten\n"
-#~ "ne paketit, jotka haluat asentaa.\n"
-#~ "\n"
-#~ "\n"
-#~ "Huomaa että sinun tulee valita peilijärjestelmä ja paketit oman maasi\n"
-#~ "lainsäädännön mukaan."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Voit nyt asentaa aikavyöhykkeen sen mukaan, missä päin asut."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Voit asettaa paikallisen kirjoittimen (liitetty omaan koneeseesi) tai "
-#~ "ulkoisen\n"
-#~ "kirjoittimen (käytettävissä Unix-, Netware- tai MS Windows -verkon yli)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Jos haluat mahdollistaa paperille tulostamisen, valitse toinen "
-#~ "seuraavista \n"
-#~ "tulostusjärjestelmistä: CUPS tai LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS on uusi, tehokas ja joustava tulostusjärjestelmä Unix-koneissa \n"
-#~ "(CUPS tulee sanoista: \"Common Unix Printing System\"). Se on Linux-\n"
-#~ "Mandraken käyttämä oletusjärjestelmä.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR on Mandrake Linuxn aikaisempien versioiden käyttämä vanha \n"
-#~ "tulostusjärjestelmä.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jos sinulla ei ole kirjoitinta, valitse \"Ei kumpaakaan\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux voi käyttää useaa eri tyyppistä kirjoitinta. Jokainen näistä \n"
-#~ "tarvitsee erilaiset asetukset.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jos kirjoittimesi on fyysisesti kiinni tietokoneessasi, valitse "
-#~ "\"Paikallinen \n"
-#~ "kirjoitin\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Jos haluat käyttää kirjoitinta, joka on toisella Unix-koneella, valitse\n"
-#~ "\"Ulkoinen kirjoitin\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Jos haluat käyttää kirjoitinta, joka sijaitsee ulkoisella Microsoft "
-#~ "Windows\n"
-#~ "-koneella, (tai Unix-koneessa, joka käyttää SMB-protokollaa),\n"
-#~ "valitse \"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Kytke kirjoittimesi päälle ennen kuin jatkat seuraavaan vaiheeseen.\n"
-#~ "Tämä antaa DrakX:lle mahdollisuuden havaita sen.\n"
-#~ "\n"
-#~ "Sinun täytyy antaa joitakin tietoja tähän.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Kirjoittimen nimi: tulostusjono käyttää \"lp\":tä kirjoittimen "
-#~ "oletusnimenä, joten sinulla täytyy olla kirjoitin, jonka nimi on \"lp\".\n"
-#~ "     Jos sinulla on vain yksi kirjoitin, voit nimetä sen useaan kertaan. "
-#~ "Sinun täytyy vain erottaa nimet putki-merkillä (\"|\"). \n"
-#~ "     Joten jos pidät enemmän merkityksellisemmästä nimestä, sinun täytyy "
-#~ "laittaa se ensimmäiseksi, esim: \"Minun kirjoitin|lp\".\n"
-#~ "     Kirjoitin, jonka jokin nimi on \"lp\" toimii oletuskirjoittimena.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Kuvaus: tämä on vapaaehtoinen, mutta käyttökelpoinen, jos "
-#~ "tiekoneellasi on useampia kirjoittimia tai \n"
-#~ "     jos haluat jakaa kirjoittimen muille tietokoneille.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Sijainti: Jos haluat antaa tietoa kirjoittimesi sijainnista, \n"
-#~ "     kirjoita se tähän (voit kirjoittaa tähän mitä tahansa, kuten \n"
-#~ "     esimerkiksi \"2. kerros\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Sinun täytyy antaa joitakin tietoja tähän.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Kirjoittimen nimi: tulostusjono käyttää \"lp\":tä kirjoittimen "
-#~ "oletusnimenä, joten sinulla täytyy olla kirjoitin, jonka nimi on \"lp\".\n"
-#~ "     Jos sinulla on vain yksi kirjoitin, voit nimetä sen useaan kertaan. "
-#~ "Sinun täytyy vain erottaa nimet putki-merkillä (\"|\"). \n"
-#~ "     Joten jos pidät enemmän merkityksellisemmästä nimestä, sinun täytyy "
-#~ "laittaa se ensimmäiseksi, esim: \"Minun kirjoitin|lp\".\n"
-#~ "     Kirjoitin, jonka jokin nimi on \"lp\" toimii oletuskirjoittimena.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Kirjoittimen yhteystapa: jos kirjoittimesi on fyysisesti liitetty "
-#~ "tietokoneeseesi, valitse \"Paikallinen kirjoitin\".\n"
-#~ "     Jos haluat käyttää kirjoitinta, joka on kiinni toisessa Unix-"
-#~ "koneessa, valitse \"Ulkoinen lpd-kirjoitin\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Jos haluat käyttää kirjoitinta, joka sijaitsee ulkoisella Microsoft "
-#~ "Windows -koneella, (tai Unix-koneessa, \n"
-#~ "joka käyttää SMB-protokollaa), valitse \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Jos haluat käyttää kirjoitinta, joka sijaitsee NetWare-verkossa, "
-#~ "valitse \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Kirjoitintasi ei voitu tunnistaa. Valitse mihin laitteeseen kirjoitin on "
-#~ "kytketty.\n"
-#~ "\n"
-#~ "\n"
-#~ "Lisätietoja: suurin osa kirjoittimista on kytketty tietokoneen "
-#~ "ensimmäiseen\n"
-#~ "rinnakkaisporttiin. Sen nimi Linuxissa on \"/dev/lp0\" ja \"LPT1\" "
-#~ "Microsoft\n"
-#~ "Windowsissa."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Valitse kirjoitin yllä olevasta listasta."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Valitse oikeat optiot kirjoittimellesi.\n"
-#~ "Lue kirjoittimesi dokumentaatio, jos haluat tietää, mitä valita täällä.\n"
-#~ "\n"
-#~ "\n"
-#~ "Sinulla on mahdollisuus testata asetuksia seuraavassa vaiheessa ja "
-#~ "korjata niitä, jos kirjoitin ei toimi haluamallasi tavalla."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Voit antaa nyt ylläpitäjän (root) salasanan Mandrake Linux "
-#~ "järjestelmällesi. \n"
-#~ "Kirjoitusvirheiden estämiseksi salasana tulee antaa kaksi kertaa. \n"
-#~ "\n"
-#~ "\n"
-#~ "Root on järjestelmän ylläpitäjä ja samalla ainoa käyttäjä, jolla on "
-#~ "oikeudet \n"
-#~ "muuttaa järjestelmän asetuksia. Tämän vuoksi valitse salasana "
-#~ "huolellisesti! \n"
-#~ "Root-tunnuksen huolimaton käyttö voi olla hyvin vaarallista "
-#~ "järjestelmälle, \n"
-#~ "sille tallennetuille tiedoille sekä muille siihen kytketyille "
-#~ "järjestelmille. \n"
-#~ "Salasanan tulee olla sekoitus kirjaimia ja numeroita sekä vähintään 8 "
-#~ "merkkiä pitkä. \n"
-#~ "Salasanaa ei saa koskaan kirjoittaa paperille. \n"
-#~ "\n"
-#~ "\n"
-#~ "Älä tee salasanastasi liian pitkää tai monimutkaista, sillä sinun täytyy "
-#~ "muistaa \n"
-#~ "se ilman turhia ponnistuksia."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Voit nyt luoda yhden tai useamman \"tavallisen\" käyttäjätunnuksen,\n"
-#~ "joiden vastakohtana on \"pääkäyttäjä\" käyttäjätunnus, root. Voit\n"
-#~ "luoda yhden tai useampia tunnuksia jokaiselle henkilölle jolle annat\n"
-#~ "oikeuden käyttää järjestelmää. Huomaa että jokaisella "
-#~ "käyttäjätunnuksella\n"
-#~ "on omat asetuksensa (graafinen käyttöliittymä, ohjelmien asetukset jne.)\n"
-#~ "ja oma \"kotihakemisto\" jonne asetukset talletetaan.\n"
-#~ "\n"
-#~ "\n"
-#~ "Luo ensin tunnus itsellesi! Vaikka olisit ainoa käyttäjä sinun ei tule\n"
-#~ "käyttää root tunnusta päivittäin, se on erittäin suuri tietoturvariski.\n"
-#~ "Pääkäyttäjä voi sekoittaa järjestelmän erittäin helpolla.\n"
-#~ "\n"
-#~ "\n"
-#~ "Eli sinun tulee kirjautua järjestelmään tunnuksella jonka luot täällä ja\n"
-#~ "käyttää root tunnusta vain järjestelmän ylläpitoon."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Käynnistyslevykkeen luominen on suositeltavaa. Jos kone ei jostain\n"
-#~ "syystä käynnistykään, tämä on ainoa keino pelastaa järjestelmä\n"
-#~ "ilman hankalaa uudelleenasennusta."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILOn ja grubin pääasetukset ovat:\n"
-#~ "  - Käynnistyslaite: Asettaa laitteen (esim. kiintolevyn osion)\n"
-#~ "joka sisältää käynnistyslohkon. Ellet aivan erityisesti halua jotakin\n"
-#~ "muuta, valitse \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Viive ennen oletusjärjestelmän käynnistämistä: Määrittelee sekunnin\n"
-#~ "kymmenyksinä ajan, jonka järjestelmänlataaja odottaa ennen "
-#~ "oletusjärjestelmän\n"
-#~ "käynnistämistä. Tämä on hyödyllinen niissä järjestelmissä, joissa "
-#~ "käynnistyksen\n"
-#~ "halutaan tapahtuvan heti, kun näppäimistö on käytettävissä. Lataaja ei "
-#~ "odota,\n"
-#~ "jos \"viive\" puuttuu tai on nolla.\n"
-#~ "\n"
-#~ "  - Näyttötila: Tämä määrittää VGA-tekstitilan, joka valitaan koneen\n"
-#~ "käynnistämisen yhteydessä. Seuraavat arvot ovat mahdollisia:\n"
-#~ "    * normaali: valitse normaali 80x25 tekstitila.\n"
-#~ "\n"
-#~ "    * <numero>:  käytä numeroa vastaavaa tekstitilaa."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO on SPARCin järjestelmälataaja: se pystyy käynnistämään jokoGNU/"
-#~ "Linuxin\n"
-#~ "tai mikä tahansa käyttöjärjestelmän, joka on tietokoneellasi. "
-#~ "Tavallisesti kaikki\n"
-#~ "käyttöjärjestelmät tunnistuvat ja asentuvat oikein. Jos jokin "
-#~ "käyttöjärjestelmistä\n"
-#~ "jää kuitenkin asentamatta, voit lisätä kyseisen järjestelmän itse. "
-#~ "Ole kuitenkinnhuolellinen, että tulet valinneeksi oikeat parametrit.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jos et halua kenenkään saavan oikeuksia johonkin käyttöjärjestelmistä,\n"
-#~ "tuhoa kyseinen kohta. Mutta huomaa, että siinä tapauksessa tarvitset itse\n"
-#~ "käynnistyslevykettä päästäksesi kyseiseen käyttöjärjestelmään!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILOn pääasetukset ovat:\n"
-#~ "  - Järjestelmälataajan asennus: Osoita, minne haluat tallentaa tiedot\n"
-#~ "GNU/Linuxin käynnistämiseksi. Jos et ole varma, mitä teet, valitse:\n"
-#~ "\"Levyn ensimmäinen sektori (MBR)\"\n"
-#~ "\n"
-#~ "\n"
-#~ "    - Viive ennen oletusjärjestelmän käynnistämistä: Määrittelee "
-#~ "sekunnin\n"
-#~ "    kymmenyksinä ajan, jonka järjestelmänlataaja odottaa ennen "
-#~ "oletusjärjestelmän\n"
-#~ "käynnistämistä. Tämä on hyödyllinen niissä järjestelmissä, joissa "
-#~ "käynnistyksen\n"
-#~ "halutaan tapahtuvan heti, kun näppäimistö on käytettävissä. Lataaja ei "
-#~ "odota,\n"
-#~ "jos \"viive\" puuttuu tai on nolla."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Nyt on X Window -järjestelmän asetusten vuoro. X Window on Linuxin\n"
-#~ "graafisen käyttöliittymän ydin. Tämän vuoksi sinun tulee asettaa sekä\n"
-#~ "näytönohjain että näyttö. Suurin osa vaiheista on automatisoituja\n"
-#~ "ja sinun tulee lähinnä varmistaa mitä on tehty ja hyväksyä valmiit\n"
-#~ "asetukset. :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Kun asetukset on tehty, X käynnistetään (ellet käskenyt\n"
-#~ "DrakX:ää tekemään toisin), jotta voit tarkistaa että asetukset\n"
-#~ "ovat kunnossa. Jos ne eivät ole, voit palata takaisin ja muuttaa\n"
-#~ "niitä niin monta kertaa kuin on tarpeen."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Jos jotain meni vikaan X:n asetuksissa, käytä näitä valintoja X:n "
-#~ "asettamiseksi\n"
-#~ "oikein."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Jos haluat käyttää graafista sisäänkirjoittautumista valitse \"Kyllä\".\n"
-#~ "Muuten valitse \"Ei\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Voit valita järjestelmäsi turvatason. Katso ohjekirjasta "
-#~ "yksityiskohtaisempia \n"
-#~ "tietoja turvatasojen vaikutuksesta. Tavallisesti jos et tiedä, mitä "
-#~ "valita, käytä \n"
-#~ "oletusvalintaa.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Järjestelmäsi käynnistetään nyt uudelleen.\n"
-#~ "\n"
-#~ "\n"
-#~ "Koneen päällekytkemisen jälkeen Mandrake Linux käynnistetään "
-#~ "automaattisesti.\n"
-#~ "Jos haluat käyttää myös muita koneessa olevia käyttöjärjestelmiä, katso "
-#~ "asianomaisia\n"
-#~ "lisäohjeita."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Tsekki (ohjelmoijat)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovakia (Ohjelmoijat)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Luotavan profiilin nimi:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Kirjoita /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "Palauta tiedostosta"
-
-#~ msgid "Save in file"
-#~ msgstr "Tallenna tiedostoon"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Palauta levykkeeltä"
-
-#~ msgid "Format all"
-#~ msgstr "Alusta kaikki"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Osioiden alustuksen jälkeen,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "kaikki tieto näillä osioilla on hävinnyt"
-
-#~ msgid "Reload"
-#~ msgstr "Uudelleenlataa"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Haluatko luoda automaattisen asennuslevyn linuxin monistamiseksi?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ASDL-asetukset"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Ulkoisella CUPS-palvelimella sinun ei tarvitse määrittää\n"
-#~ "kirjoittimen tyyppiä; kaikki kirjoittimet tunnistuvat automaattisesti\n"
-#~ "paitsi jos tulostusserveri sijaitsee eri verkossa. Jälkimmäisessä\n"
-#~ "tapauksessa sinun täytyy antaa CUPS-palvelimen IP-osoite\n"
-#~ "ja mahdollisesti portin numero."
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Etäjonon nimi:"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Verkkoalueen nimi"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Ei kirjoitinta"
-
-#, fuzzy
-#~ msgid "start it"
-#~ msgstr "rajoita"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Verkon monitorointi"
-
-#~ msgid "Profile "
-#~ msgstr "Profiili "
-
-#~ msgid "Statistics"
-#~ msgstr "Statistiikka"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Lähetysnopeus: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Vastaanottonopeus: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Yhteyden nimi: "
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Otan yhteyden internettiin "
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Katkaisen internetyhteyden"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Internetyhteyden katkaiseminen epäonnistui."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Internetyhteys katkaistu."
-
-#~ msgid "Connection complete."
-#~ msgstr "Yhteys muodostettu."
-
-#, fuzzy
-#~ msgid "Color configuration"
-#~ msgstr "Asetusten muokkaus"
-
-#~ msgid "sent: "
-#~ msgstr "lähetetty: "
-
-#~ msgid "received: "
-#~ msgstr "vastaanotettu: "
-
-#~ msgid "Connect"
-#~ msgstr "Yhdistä"
-
-#~ msgid "Disconnect"
-#~ msgstr "Katkaise yhteys"
-
-#~ msgid "/File/_New"
-#~ msgstr "/Tiedosto/_Uusi"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>N"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/Tiedosto/_Avaa"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>O"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/Tiedosto/_Tallenna"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/Tiedosto/Tallenna _Nimellä"
-
-#~ msgid "/File/-"
-#~ msgstr "/Tiedosto/-"
-
-#~ msgid "/_Options"
-#~ msgstr "/_Optiot"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/Optiot/Testi"
-
-#~ msgid "/_Help"
-#~ msgstr "/_Apua"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/Apua/_Tietoja..."
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Oletus"
-
-#~ msgid "Europe"
-#~ msgstr "Eurooppa"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "Poista jono"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Asetustiedoston sisältöä ei voida tulkita."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Tunnistamaton asetustiedosto"
-
-#~ msgid "Adapter"
-#~ msgstr "Laite"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "Poista käytöstä"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Ota käyttöön"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Voit nyt testata hiirtäsi. Käytä hiiren painikkeita ja rullaa "
-#~ "varmistaaksesi\n"
-#~ "että asetukset ovat kunnossa. Jos eivät ole, voit painaa \"Peruuta\"\n"
-#~ "valitaksesi toisen ajurin."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (tai ASDL) -yhteys"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Sulje"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Voit antaa suoraan URIn käyttääksesi kirjoitinta CUPS:in kanssa."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Kyllä, tulosta ASCII-testisivu"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Kyllä, tulosta PostScript-testisivu"
-
-#~ msgid "Paper Size"
-#~ msgstr "Paperikoko"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Poista sivu työn jälkeen?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint ajurin asetukset"
-
-#~ msgid "Color depth options"
-#~ msgstr "Värisyvyysasetukset"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Tulosta teksti postscript muodossa?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Korjaa askelmainen rivinvaihto?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Sivujen määrä tulostettavalla sivulla"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Vasen/Oikea mariginaali pisteinä (1/72 tuuma)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Ylä/Ala-mariginaalit pisteinä (1/72 tuumina)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Lisäasetukset GhostScriptille"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Lisätekstiasetukset"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Käänteinen sivujärjestys"
-
-#~ msgid "CUPS starting"
-#~ msgstr "CUPS käynnistyy"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Valitse ulkoinen kirjoitinyhteys"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Jokainen kirjoitin tarvitsee nimen (usein lp). Myös muita parametreja,\n"
-#~ "kuten kirjoittimen kuvaus tai sen sijainti, voidaan määrittää.\n"
-#~ "Mitä nimeä haluat käyttää tälle kirjoittimelle ja miten se on liitetty\n"
-#~ "koneeseen?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Jokainen tulostusjono (johon tulostustöitä ohjataan) tarvitsee\n"
-#~ "nimen (usein lp) ja jonohakemiston joka liittyy nimeen. Mitä\n"
-#~ "nimeä ja hakemistoa käytetään tälle jonolle ja miten kirjoitin\n"
-#~ "on liitetty?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Jonon nimi"
-
-#~ msgid "Spool directory"
-#~ msgstr "Jonohakemisto"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Lähiverkon asetukset"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Palveluntarjoajan dns 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Palveluntarjoajan dns 2"
-
-#, fuzzy
-#~ msgid "fsck failed: "
-#~ msgstr "liittäminen epäonnistui: "
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Tehdäksesi järjestelmästäsi turvallisemman valitse \"Käytä shadow-"
-#~ "tiedostoa\" ja\n"
-#~ "\"Käytä MD5-salasanoja\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Jos verkkosi käyttää NIS:ä, valita \"Käytä NIS:iä\". Jos et ole varma "
-#~ "asiasta\n"
-#~ "kysy verkkoylläpitäjältäsi."
-
-#~ msgid "yellow pages"
-#~ msgstr "keltaiset sivut"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Miten haluat liittyä internettiin?"
diff --git a/perl-install/share/po/fr.po b/perl-install/share/po/fr.po
deleted file mode 100644
index edf77f8e7..000000000
--- a/perl-install/share/po/fr.po
+++ /dev/null
@@ -1,11902 +0,0 @@
-# Translatrion file of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# David BAUDENS <baudens@mandrakesoft.com>, 1999-2001
-# David ODIN <odin@mandrakesoft.com>, 2000
-# Pablo Saratxaga <pablo@mandrakesoft.com>, 2001
-# KAtiOS <katios@nolabel.net>, 2001
-#
-# Veuillez ne pas mettre à jour ce fichier à moins d'être
-# certain tant de vos traductions que de votre grammaire et
-# de votre orthographe. Ces dernières sont trop souvents
-# approximatives. Elles nécessitent alors des relectures et
-# des corrections qui n'ont d'autre conséquence que de faire
-# perdre du temps à tout le monde (à vous si votre travail est
-# imparfait et aux relecteurs qui doivent rechercher puis corriger
-# vos éventuelles fautes).
-#
-# VEUILLEZ RESPECTER LA TYPHOGRAPHIE FRANÇAISE !
-# Les majuscules doivent être accentuées si besoin est. Respectez
-# les espaces nécessaires pour la ponctuation (espace après la virgule et
-# le point, espace avant les points d'interrogation et d'exclamation,
-# espace avant et après le point virgule).
-#
-# Les guillemets françaises sont « et » et non ". La guillemet ouvrante
-# « est suivie d'un espace insécable et la guillemet fermante » est
-# précédée du même type d'espace.
-#
-# Enfin, traduisez INTELLIGEMMENT et non mot à mot. Certaines traductions
-# n'ont aucun sens en français.
-#
-# Nous vous remercions de votre compréhension.
-# ###
-# ### NOTES sur les traductions de KAtiOS
-# ###	* traduction de 'bootstrap' ?
-# ###	* OldWorld == ancien monde ?
-# ###	* 'light configuration' -> 'config «light»' ou 'config légère'
-# ###	* traduire dscriptifs pour CUPS,LPR,PDQ,... ?
-# ###	* traduire 'URI' ?
-# ### le reste est OK -- pablo
-# ###
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX for MDK 8.1\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-09-19 15:46+0200\n"
-"Last-Translator: David BAUDENS <baudens@mandrakesoft.com>\n"
-"Language-Team: french\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-15\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Configurer toutes les têtes indépendamment"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Utiliser l'extension Xinerama"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configurer seulement la carte « %s » (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Configuration multi-têtes"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Votre système supporte la configuration de plusieurs têtes.\n"
-"Que souhaitez-vous faire ?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Carte graphique"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Choisissez une carte graphique"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Choisissez un serveur X"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "serveur X"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Quelle configuration d'XFree désirez-vous utiliser ?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Votre carte vidéo peut utiliser l'accélération 3D matérielle mais\n"
-"uniquement en utilisant XFree %s.\n"
-"Votre carte vidéo est supportée par XFree %s. Ce dernier peut être plus\n"
-"performant en 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Votre carte vidéo peut utiliser l'accélération 3D matérielle avec XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s avec accélération 3D matérielle"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Votre carte vidéo peut utiliser l'accélération 3D matérielle en utilisant\n"
-"XFree %s.\n"
-"Veuillez noter que ce support est EXPÉRIMENTAL et qu'il peut FIGER VOTRE\n"
-"ORDINATEUR."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s avec support EXPÉRIMENTAL de l'accélération 3D matérielle"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Votre carte vidéo peut utiliser l'accélération 3D matérielle mais\n"
-"uniquement en utilisant XFree %s.\n"
-"Attention, veuillez noter que ce support est EXPÉRIMENTAL et peut FIGER\n"
-"VOTRE ORDINATEUR.\n"
-"\n"
-"Votre carte vidéo est supportée par XFree %s. Ce dernier peut être plus\n"
-"performant en 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installation du pilote d'affichage)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "Configuration d'XFree"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr ""
-"Veuillez préciser la quantité de mémoire vidéo de votre carte graphique"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Choisissez les options du serveur"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Choisissez un moniteur"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Moniteur"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Les deux paramètres importants sont la fréquence de rafraîchissement\n"
-"verticale (qui détermine la vitesse à laquelle l'écran est rafraîchi)\n"
-"et, surtout, la fréquence de synchronisation horizontale (qui détermine\n"
-"la vitesse à laquelle les lignes sont tracées).\n"
-"\n"
-"Il est important que vous ne spécifiiez pas un type de moniteur pouvant\n"
-"utiliser une fréquence de rafraîchissement excédant les capacités de votre\n"
-"moniteur. Vous risqueriez de l'endommager.\n"
-"En cas de doute, choisissez un réglage peu performant mais sans risque pour\n"
-"votre matériel."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Fréquence horizontale"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Fréquence verticale"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Le moniteur n'est pas configuré"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "La carte graphique n'est pas encore configurée"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "La résolution n'a pas encore été choisie"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Désirez-vous tester la configuration ?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Attention : le test de cette carte vidéo peut geler votre ordinateur"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Test de la configuration"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"essayez de modifier quelques paramètres"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Une erreur est survenue :"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Fin du test dans %d secondes"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Êtes-vous satisfait ?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr ""
-"Une erreur est survenue, essayez de modifier\n"
-"quelques paramètres"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Résolution"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Choix de la résolution et du nombre de couleurs"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Carte graphique : %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Serveur XFree86 : %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Mode expert"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Tout montrer"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Résolutions"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Disposition du clavier : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Type de souris : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Périphérique : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Moniteur : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Fréquence horizontale : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Fréquence verticale : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Carte graphique : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Indentification de la carte graphique : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Mémoire vidéo : %s ko\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Nombre de couleurs : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Résolution : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Serveur XFree86 : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Pilote XFree86 : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Préparation de la configuration de X Window"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Que désirez-vous faire ?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Changer le moniteur"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Changer la carte graphique"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Changer les options du serveur"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Changer la résolution"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Afficher les informations"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Tester à nouveau"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Quitter"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Désirez-vous conserver les changements ?\n"
-"La configuration actuelle est :\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Veuillez relancer %s pour activer les changements"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"Veuillez vous déconnecter puis presser simultanément les touches Ctrl-Alt-"
-"BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "Interface graphique lors du démarrage"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Le système peut être configuré pour que l'interface graphique soit\n"
-"automatiquement activée lors du démarrage.\n"
-"Le souhaitez-vous ?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 couleurs (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mille couleurs (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mille couleurs (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 millions de couleurs (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milliards de couleurs (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 ko"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 ko"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 Mo ou plus"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 à 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 à 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatible 8514, 1024x768 à 87 Hz entrelacés (sans 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 à 87 Hz entrelacés, 800x600 à 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA étendu, 800x600 à 60 Hz, 640x480 à 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA non entrelacé, 1024x768 à 60 Hz, 800x600 à 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA haute fréquence, 1024x768 à 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-fréquences supportant le 1280x1024 à 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-fréquences supportant le 1280x1024 à 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-fréquences supportant le 1280x1024 à 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Moniteur supportant le 1600x1200 à 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Moniteur supportant le 1600x1200 à 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Premier secteur de la partition de démarrage"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Premier secteur du disque (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "Installation de SILO"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Où désirez-vous installer le chargeur de démarrage ?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "Installation de LILO/Grub"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO avec menu texte"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO avec menu graphique"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Démarrer à partir de DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Principales options du chargeur de démarrage"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Chargeur de démarrage à utiliser"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Installation du chargeur de démarrage"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Périphérique de démarrage"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne fonctionne pas avec des BIOS anciens)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Compact"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "compact"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Mode vidéo"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Délai avant l'activation du choix par défaut"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Mot de passe"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Confirmation"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Directive « restrict »"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "restrict"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Purger « /tmp » à chaque démarrage"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Précisez la taille mémoire si nécessaire (%d Mo trouvés)"
-
-#  ???
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Autoriser les profils multiples"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Indiquez la quantité de mémoire en Mo"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"La directive « restrict » est inutile si vous ne spécifiez pas un mot de "
-"passe"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Veuillez réessayer"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Les mots de passe ne correspondent pas"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Message de démarrage"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Délai de l'Open Firmware"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Délai du démarrage du noyau"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Autoriser le démarrage sur CD ?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Autoriser le démarrage sur l'OF ?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "OS par défaut ?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Les entrées suivantes sont celles déjà présentes.\n"
-"Vous pouvez les modifier ou en ajouter."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Ajouter"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Terminer"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Modifier"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Quel type d'entrée voulez-vous ajouter ?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Autres systèmes (SunOS, etc.)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Autres systèmes (MacOS, etc.)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Autres systèmes (Windows, etc.)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Image"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Lecture/Écriture"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Table"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Peu sûr"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Label"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Défaut"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-size"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Supprimer l'entrée"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Un label vide n'est pas autorisé"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Ce label est déjà utilisé"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Interface(s) %s %s détectée(s)"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "En possédez-vous d'autres ?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Possédez-vous des interfaces %s ?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Non"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Oui"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Voir les informations sur le matériel"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installation du pilote pour la carte %s %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Quel pilote %s faut-il essayer ?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Dans certains cas, le pilote %s a besoin\n"
-"d'informations supplémentaires pour trouver son matériel, bien que\n"
-"ce ne soit généralement pas nécessaire. Il peut arriver que la\n"
-"recherche automatique gèle la machine, sans dommage cependant pour\n"
-"l'ordinateur. Désirez-vous lui passer ces informations ?"
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Détection automatique"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Spécifier les options"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Vous pouvez maintenant préciser les options du module %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Vous devez maintenant préciser les options pour le module %s.\n"
-"Les options sont de la forme « nom=valeur nom2=valeur2 ... ».\n"
-"Par exemple, « io=0x300 irq=7 »"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Options du module :"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Le chargement du module %s a échoué.\n"
-"Désirez-vous réessayer avec d'autres paramètres ?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "Utilisateur(s) existant(s) : %s"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Ce mot de passe est trop simple"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Un nom d'utilisateur est requis"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Le nom de login ne peut contenir que des lettres minuscules,\n"
-"des nombres, ainsi que les caractères « - » et « _ »"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Ce nom d'utilisateur est déjà utilisé"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Ajouter un utilisateur"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Créer un compte utilisateur\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Accepter"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Nom et prénom"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Nom de login"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Icône"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Connexion automatique"
-
-#: ../../any.pm_.c:757
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Le système peut être configuré de tel façon que vous n'ayez pas\n"
-"à vous identifier (un utilisateur par défaut sera utilisé).\n"
-"Désirez-vous utiliser cette fonctionnalité ?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Choisissez l'utilisateur par défaut :"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Choisissez le gestionnaire de fenêtres à utiliser :"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Veuillez choisir la langue à utiliser."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Vous pouvez choisir d'autres langues.\n"
-"Elles seront disponibles après l'installation."
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Tout"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Bienvenue dans %s, le chargeur de systemes d'exploitation.\n"
-"\n"
-"Choisissez un systeme d'exploitation dans la \n"
-"liste ci-dessus ou attendez %d secondes pour \n"
-"le demarrage par defaut.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bienvenue dans GRUB, le chargeur de systemes d'exploitation"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Utilisez les touches %c et %c pour sélectionner l'entrée en surbrillance."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Appuyez sur Entrée pour démarrer le SE sélectionné, sur « e » pour modifier "
-"les"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-"commandes avant de démarrer ou sur « c » pour utiliser la ligne de commande."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Le SE en surbrillance sera automatiquement demarré dans %d secondes."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "il n'y a pas assez de place dans /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Bureau"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Menu Démarrer"
-
-#: ../../bootloader.pm_.c:972
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr ""
-"Vous ne pouvez pas installer le chargeur de démarrage\n"
-"sur une partition %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pas d'aide disponible pour l'instant.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuration du style de démarrage"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Fichier"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Fichier/_Quitter"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Moniteur nouveau style avec catégorisation"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Moniteur nouveau style"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Moniteur traditionnel"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Moniteur traditionnel Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Utiliser Aurora au démarrage"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Mode de lilo/grub"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Vous utilisez actuellement %s comme gestionnaire de démarrage.\n"
-"Cliquez sur Configurer pour lancer l'assistant de configuration."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Configurer"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Mode de démarrage"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Mode système"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Lancer X-Window au démarrage"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Non, je ne souhaite pas autologin"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Oui, je veux autologin avec cela (utilisateur, bureau)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Annuler"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "échec de l'ouverture de /etc/inittab en lecture : %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "L'installation de LILO a échoué pour la raison suivante :"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "Go"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "Ko"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "Mo"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "To"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutes"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minute"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d secondes"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Veuillez effectuer une copie de sauvegarde de vos données avant tout"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Lisez attentivement !"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Si vous avez l'intention d'utiliser aboot, veuillez laisser\n"
-"un espace libre au début du disque (2048 secteurs sont suffisants)."
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Erreur"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Assistant"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Nouveau"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "Distant"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Point de montage"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Options"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Type"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Démonter"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Monter"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Choisissez une action"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Vous possédez une seule partition. Cette dernière est de type FAT (format\n"
-"généralement utilisé par Microsoft DOS ou Windows) et est de grande taille.\n"
-"Il vous est suggéré de la redimensionner dans un premier temps (cliquez\n"
-"dessus puis sur « Redimensionner »)."
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Veuillez cliquer sur une partition"
-
-#: ../../diskdrake.pm_.c:240
-msgid "Please click on a media"
-msgstr "Veuillez cliquer sur une source"
-
-#: ../../diskdrake.pm_.c:243
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr ""
-"Veuillez cliquer sur l'un des boutons ci-dessus\n"
-"\n"
-"ou utilisez « Nouveau »"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr "Utilisez « New »"
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Détails"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Journalised FS"
-msgstr "SF journalisé"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Vide"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Autre"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Types des systèmes de fichiers :"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Créer"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Utilisez plutôt « %s »"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Supprimer"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Utilisez « Démonter » d'abord"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Après avoir modifié le type de la partition %s, toutes les données\n"
-"présentes sur cette partition seront perdues."
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Où désirez-vous monter la partition %s ?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "Options de montage"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "Divers"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "Périphériques amovibles"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "Changer le type"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Quel système de fichiers désirez-vous utiliser ?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "Recherche des partages nfs disponibles"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "Recherche des partages nfs disponibles sur le serveur %s"
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-"Si l'entrée désirée ne figure pas dans la liste ci-dessus, veuillez "
-"l'indiquer ici :"
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Serveur"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "Resource partagée"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "Recherche des partages samba disponibles"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "Recherche des partages samba disponibles sur le serveur %s"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "Choisissez une partition"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Choisissez une autre partition"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Quitter"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Passer en mode expert"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Passer en mode normal"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Défaire"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Désirez-vous tout de même continuer ?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Quitter sans sauvegarder"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Désirez-vous réellement quitter sans écrire la table des partitions ?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Désirez-vous sauvegarder les modifications de /etc/fstab"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Partitionnement automatique"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Tout supprimer"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Davantage"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "Informations sur les disques durs"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Pas assez d'espace libre pour l'allocation automatique"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Toutes les partitions primaires sont utilisées"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Impossible d'ajouter une partition"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Pour pouvoir utiliser plus de partitions, vous devez d'abord en supprimer "
-"une pour la remplacer par une partition étendue."
-
-#: ../../diskdrake_interactive.pm_.c:285
-msgid "Save partition table"
-msgstr "Écrire la table des partitions"
-
-#: ../../diskdrake_interactive.pm_.c:286
-msgid "Restore partition table"
-msgstr "Restaurer la table des partitions"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Restaurer la table des partitions"
-
-#: ../../diskdrake_interactive.pm_.c:289
-msgid "Reload partition table"
-msgstr "Recharger la table des partitions"
-
-#: ../../diskdrake_interactive.pm_.c:293
-msgid "Removable media automounting"
-msgstr "Auto-montage des périphériques amovibles"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Sélectionnez un fichier"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La table de partitions contenue sur la sauvegarde\n"
-"n'a pas la même taille que le disque.\n"
-"Désirez-vous tout de même continuer ?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Attention"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Insérez une disquette dans le lecteur.\n"
-"Toutes les données présentes sur cette disquette seront perdues."
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Tentative de restauration de la table des partitions"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "Informations détaillées"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Redimensionner"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Déplacer"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formater"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Activer"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Ajouter au RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Ajouter au LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Supprimer du RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Supprimer du LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Modifier le RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Utiliser pour loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Création d'une nouvelle partition"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Secteur de début : "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Taille en Mo : "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Type du système de fichiers : "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Point de montage : "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Préférence : "
-
-#: ../../diskdrake_interactive.pm_.c:462
-msgid "Remove the loopback file?"
-msgstr "Supprimer le fichier loopback ?"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Changement du type de la partition"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "Passage de ext2 à ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Où désirez-vous monter le fichier loopback %s ?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Il est impossible de désélectionner ce point de montage car il est\n"
-"utilisé pour le loopback. Veuillez supprimer ce dernier d'abord."
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Calcul des limites du système de fichiers FAT en cours"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Redimensionnement"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Cette partition ne peut pas être redimensionnée"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"Toutes les données présentes sur cette partition\n"
-"devraient avoir été sauvegardées."
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Après avoir redimensionné la partition %s, toutes les données présentes\n"
-"sur cette partition seront perdues"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Choisissez la nouvelle taille"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "Nouvelle taille en Mo : "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Sur quel disque voulez-vous la déplacer ?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Secteur"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Sur quel secteur voulez-vous la déplacer ?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Déplacement"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Déplacement de la partition en cours"
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Choisissez un RAID existant pour l'ajout"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "Nouveau"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Choisissez un LVM existant pour l'ajout"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "Nom LVM ?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Cette partition ne peut être utilisée pour du loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Nom du fichier loopback :"
-
-#: ../../diskdrake_interactive.pm_.c:736
-msgid "Give a file name"
-msgstr "Donnez un nom de fichier"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Ce fichier est déjà utilisé par un autre loopback.\n"
-"Veuillez en choisir un autre."
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Le fichier existe déjà. Faut-il l'utiliser ?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "Périphérique"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "Niveau"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "Taille des blocs"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Soyez prudent : cette opération est dangeureuse"
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Quel type de partitionnement ?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Désolé, mais il est impossible de placer le répertoire /boot si loin sur\n"
-"le disque : le numéro du dernier cylindre est supérieur à 1024.\n"
-"Si vous utilisez LILO, il ne fonctionnera pas, et si vous ne l'utilisez pas, "
-"vous n'avez pas besoin de partition /boot."
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"La partition que vous avez choisie pour être la partition racine se\n"
-"situe au-delà du 1024° cylindre du disque, et vous n'avez pas de\n"
-"partition /boot. Si vous comptez utiliser LILO, n'oubliez pas de créer\n"
-"une partition /boot."
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Vous avez choisi une partition RAID logicielle en tant que partition\n"
-"racine (/). Aucun chargeur de démarrage n'est capable de gérer une telle\n"
-"situation si une partition /boot n'existe pas. Veillez donc à ajouter une\n"
-"telle partition."
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "La table de partitions de %s va maintenant être écrite sur le disque !"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Vous devez redémarrer pour que les modifications soient prises en compte"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Après avoir formaté la partition %s, toutes les données présentes\n"
-"sur cette partition seront perdues"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Formatage"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatage du fichier loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatage de la partition %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Hide files"
-msgstr "Cacher les fichiers"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Move files to the new partition"
-msgstr "Déplacer les fichiers sur la nouvelle partition"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Le répertoire %s contient déjà des données\n"
-"(%s)"
-
-#: ../../diskdrake_interactive.pm_.c:906
-msgid "Moving files to the new partition"
-msgstr "Déplacement des fichiers sur la nouvelle partition"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr "Copie de %s"
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, c-format
-msgid "Removing %s"
-msgstr "Suppression de %s"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Périphérique : "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Identifiant DOS supposé : %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Type : "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Nom : "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Début : secteur %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Taille : %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s secteurs"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Cylindre %d à cylindre %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Formatée\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Non formatée\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Montée\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Fichier(s) loopback :\n"
-"   %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partition de démarrage par défaut\n"
-"(pour DOS/Windows, pas pour LILO)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Niveau %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Taille des blocs %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "disques RAID %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nom du fichier loopback : %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Il y a des chances que cette partition\n"
-"soit une partition contenant des pilotes\n"
-"systèmes, vous devriez la laisser de côté.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Cette partition spéciale de Bootstrap\n"
-"est utile pour le multi-boot.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Taille : %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Géométrie : %s cylindres, %s têtes, %s secteurs\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Information : "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "disques LVM %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Table des partitions de type : %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "sur bus %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Options : %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "le formatage au format %s de %s a échoué"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Impossible de formater %s au format %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "Le montage a échoué"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck a échoué avec le code de sortie %d ou le signal %d"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "Le montage a échoué : "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "Le démontage de %s a échoué : %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simple"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "serveur"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Vous ne pouvez utiliser JFS pour des partitions de moins de 16 Mo"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Vous ne pouvez utiliser ReiserFS pour des partitions de moins de 32 Mo"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Les points de montage doivent commencer par /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Le point de montage %s est déjà utilisé par une partition\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-"Vous ne pouvez pas utiliser une partition logique LVM pour le point de "
-"montage %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Ce répertoire devrait rester dans le système de fichiers racine"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Vous avez besoin d'un vrai système de fichiers (ext2, reiserfs) pour ce "
-"point de montage\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Erreur lors de l'ouverture de %s en écriture : %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Une erreur est survenue : aucun périphérique valide n'a été trouvé pour\n"
-"créer de nouvelles partitions. Veuillez vérifier votre matériel."
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Vous n'avez défini aucune partition !"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux est un système multi-utilisateurs, ce qui signifie généralement\n"
-"que chaque utilisateur peut avoir des préférences différences, ses propres\n"
-"fichiers, etc. Pour plus d'informations, consultez le manuel d'utilisation.\n"
-"Contrairement à « root » qui a tous les droits, les utilisateurs que vous\n"
-"ajouterez ici n'auront que des permissions pour agir sur leurs propres\n"
-"fichiers exclusivement.\n"
-"\n"
-"L'utilisateur/administrateur devrait également se créer un compte\n"
-"« normal ». C'est à travers cet utilisateur que celui-ci devrait se\n"
-"connecter pour accomplir ses tâches quotidiennes. Car, bien qu'il soit\n"
-"pratique d'avoir tous les accès, cette situation peut également engendrer\n"
-"des situations désastreuses si un fichier est détruit par inadvertance. Un\n"
-"utilisateur normal n'ayant pas accès aux fichiers sensibles, ne peut causer\n"
-"de dommages majeurs.\n"
-"\n"
-"Il faut d'abord entrer le vrai nom de la personne. Évidemment, vous pouvez\n"
-"y inscrire n'importe quoi. DrakX prendra le premier mot inséré et le\n"
-"transposera comme « Nom de login ». C'est le nom qui sera utilisé pour se\n"
-"connecter au système. Vous pouvez le modifier. Il faut maintenant entrer un\n"
-"mot de passe. Celui-ci n'est pas aussi crucial que le mot de passe de\n"
-"« root », mais ce n'est pas une raison pour rentrer 123456. Après tout,\n"
-"ceci mettrait vos fichiers en péril.\n"
-"\n"
-"Si vous cliquez « Accepter », il vous sera possible d'ajouter d'autres\n"
-"utilisateurs. Créez un utilisateur différent pour chaque personne (votre\n"
-"petit ami, votre soeur, etc) devant utiliser votre ordinateur. Une fois\n"
-"chaque utilisateur défini, cliquez sur « Terminer ».\n"
-"\n"
-"En cliquant sur « Avancé », vous pourrez sélectionner un « shell »\n"
-"différent pour cet utilisateur (bash est assigné par défaut)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Les partitions listées ci-dessus sont les partitions Linux existantes "
-"détectées\n"
-"sur votre disque dur. Vous pouvez conserver les choix effectués par "
-"l'assistant,\n"
-"ils sont adaptés à un usage courant. Si vous désirez modifier ces choix, "
-"sachez\n"
-"que vous devez au moins définir une partition comme partition racine "
-"(« / »).\n"
-"Ne choisissez pas une partition trop petite car vous ne pourrez alors pas\n"
-"installer suffisament de logiciels. Si vous désirez stocker vos partitions\n"
-"sur une partition différente, vous devez également définir une partition\n"
-"« /home » (ce n'est possible que si vous possédez plus d'une partition "
-"Linux\n"
-"sur votre système.\n"
-"\n"
-"\n"
-"Pour information, chaque partition est décrite comme suit : « Nom »,\n"
-"« Capacité ».\n"
-"\n"
-"\n"
-"Le champ « Nom » est codé comme suit : « type du disque dur », « numéro du\n"
-"disque dur », « numéro de la partition » (par exemple, « hda1 »).\n"
-"\n"
-"\n"
-"Le champ « type du disque dur » correspond à « hd » si voutre disque dur est "
-"un\n"
-"disque dur IDE ou « sd » s'il s'agit d'un disque SCSI.\n"
-"\n"
-"\n"
-"Avec un disque dur IDE,\n"
-"   * « a » signifie « disque maître sur la première nappe IDE »,\n"
-"   * « b » signifie « disque esclave sur la première nappe IDE »,\n"
-"   * « c » signifie « disque maître sur la seconde nappe IDE »,\n"
-"   * « d » signifie « disque esclave sur la seconde nappe IDE ».\n"
-"\n"
-"\n"
-"Avec un disque dur SCSI, un « a » signifie « premier disque dur », « b »\n"
-"signfie « second disque dur », etc. »"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Les paquetages requis à l'installation de Mandrake Linux sont distribués\n"
-"sur plusieurs CDROM. Heureusement, DrakX connaît l'emplacement de chacun\n"
-"des paquetages. Il éjectera celui présent dans le lecteur et vous demandera\n"
-"d'insérer le CDROM approprié, selon le cas."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"C'est maintenant le moment de choisir les paquetages qui seront installés\n"
-"sur votre système. Sachez que Mandrake Linux contient plusieurs milliers de\n"
-"paquetages à installer, et qu'il n'est pas nécessaire de tous les connaître\n"
-"par coeur.\n"
-"\n"
-"Si vous êtes en train de faire une installation normale à partir d'un\n"
-"CDROM, il vous sera d'abord demandé de spécifier quel CD vous avez (en mode\n"
-"Expert). Vérifier les étiquettes et cliquez sur les boîtes leur étant\n"
-"associées. Cliquez sur « OK », lorsque vous êtes prêt à continuer.\n"
-"\n"
-"Les paquetages sont regroupés selon la nature de l'installation. Les\n"
-"groupes sont divisés en quatre sections principales:\n"
-"\n"
-" * « Station de travail »: si vous comptez utiliser votre machine ainsi,\n"
-"sélectionner un ou plusieurs groupes y correspondant.\n"
-"\n"
-" * « Environnement graphique »: ce groupe vous permettra de déterminer quel\n"
-"environnement graphique vous voulez avoir sur votre système. Évidemment, il\n"
-"vous en faut au moins un pour utiliser votre station en mode graphique.\n"
-"\n"
-" * « Développement »: si votre système sera utilisé pour la programmation,\n"
-"choisissez les groupes désirés.\n"
-"\n"
-" * « Serveur »: finalement, si vous système doit agir en tant que serveur,\n"
-"vous pourrez sélectionner les services que vous voulez installer.\n"
-"\n"
-" * « Environnement graphique »: ce groupe vous permettra de déterminer quel\n"
-"environnement graphique vous voulez avoir sur votre système. Évidemment, il\n"
-"vous en faut au moins un pour utiliser votre station en mode graphique.\n"
-"\n"
-"En plaçant votre souris au dessus d'un nom de groupe, vous verrez\n"
-"apparaître une courte description de ce groupe.\n"
-"\n"
-"Vous pouvez finalement cocher l'option « Sélection individuelle des\n"
-"paquetages ». Cette option est à utiliser si vous connaissez exactement le\n"
-"paquetage désiré ou si vous voulez avoir le contrôle total de votre\n"
-"installation.\n"
-"\n"
-"Si vous avez démarré l'installation en mode \"mise à jour\", vous pouvez\n"
-"\"dé-sélectionner\" tous les groupes afin d'éviter l'installation de\n"
-"nouveaux programmes. Cette option est très utile pour restaurer un système\n"
-"défectueux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Finalement, si vous avez choisi de sélectionner individuellement les\n"
-"paquetages à installer, DrakX vous présentera un arbre contenant tous les\n"
-"paquetages, classés par groupe et sous-groupe. En naviguant à travers\n"
-"l'arbre, vous pouvez sélectionner des groupes, des sous-groupes ou des\n"
-"paquetages individuels.\n"
-"\n"
-"Dès que vous sélectionnez un paquetage dans l'arbre, une descriptions\n"
-"apparaît à droite. Une fois votre sélection complétée, cliquez sur\n"
-"« Installation » pour lancer le processus. Soyez patient, car en fonction\n"
-"du type d'installation choisi ou du nombre de paquetages sélectionnés, le\n"
-"temps requis peut être substantiellement différent. Une estimation du temps\n"
-"requis est présentée sur l'écran en cours d'opération afin de vous\n"
-"permettre d'évaluer de combien de temps vous disposez pour prendre votre\n"
-"déjeuner.\n"
-"\n"
-"!! Si un logiciel serveur a été sélectionné, vous devrez confirmer que vous\n"
-"voulez vraiment que celui-ci soit installé. Sous Mandrake, par défaut, tous\n"
-"les serveurs installés sont lancés au démarrage. Malgré tous les efforts\n"
-"investis pour vous livrer une distribution Linux sécuritaire, il est\n"
-"possible que certaines failles de sécurité affectes les serveurs installés\n"
-"au-delà de la date de publication. Si vous ne savez pas précisément à quoi\n"
-"sert un serveur en particulier ou pourquoi il est installé, cliquez sur\n"
-"« NON ». En cliquant sur « OUI », le serveur sera installé et le service\n"
-"rendu disponible au démarrage. !!\n"
-"\n"
-"L'option « Dépendances automatiques » désactive les avertissements qui\n"
-"apparaissent à chaque fois que l'installeur sélectionne un nouveau paquet.\n"
-"Ces avertissements surviennent parce que DrakX a déterminé que pour qu'un\n"
-"paquetage soit fonctionnel, il lui en faut un autre dont il est dépendant.\n"
-"\n"
-"La petite icône de disquette qui apparaît au bas de la liste permet de\n"
-"récupérer une liste de paquetages sélectionnés durant une autre\n"
-"installation. En cliquant dessus, on vous demandera d'insérer la disquette\n"
-"créée lors d'une installation précédente. Voir la deuxième note de la\n"
-"dernière étape afin de savoir comment créer une telle disquette."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Si vous désirez connecter votre système à un réseau ou à l'Internet,\n"
-"veuillez choisir l'option appropriée. Veuillez également mettre vos\n"
-"périphériques externes sous tension pour que DrakX puisse les détecter\n"
-"automatiquement.\n"
-"\n"
-"Mandrake Linux vous propose de configurer votre connexion à Internet au\n"
-"moment de l'installation. Voici les types de connexion supportées: modem\n"
-"téléphonique, modem ISDN, connexion ADSL, modem câble ou simplement LAN\n"
-"(réseau ethernet).\n"
-"\n"
-"Nous ne détaillerons pas ici chacune des configurations possible. Assurez\n"
-"vous seulement que vous avez toutes les informations de votre fournisseur\n"
-"de service Internet à portée de main.\n"
-"\n"
-"Vous pouvez consulter le chapitre du manuel concernant les connexions à\n"
-"Internet pour plus de détails à propos des configurations spécifiques de\n"
-"chaque type de connexion. Vous pouvez également configurer votre connexion\n"
-"à Internet une fois l'installation terminée.\n"
-"\n"
-"Si vous désirez configurer votre réseau plus tard ou si vous avez terminé\n"
-"l'installation de votre réseau, cliquez sur « Annuler »."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Vous pouvez maintenant choisir les services disponibles au démarrage de\n"
-"votre système.\n"
-"\n"
-"Ici sont présentés tous les services disponibles avec l'installation en\n"
-"place. Faites une bonne vérification et enlevez tout ce qui n'est pas\n"
-"absolument nécessaire au démarrage du système.\n"
-"\n"
-"Vous pouvez obtenir une courte explication des service en les sélectionnant\n"
-"spécifiquement. Cela dit, si vous n'êtes pas certain de l'application d'un\n"
-"service, conservez les paramètres par défaut\n"
-"\n"
-"À cette étape, soyez particulièrement attentif dans le cas d'un système\n"
-"destiné à agir comme serveur. Dans ce cas, vous voudrez probablement\n"
-"permettre exclusivement les services nécessaires."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU-Linux gère l'heure en temps GMT (« Greenwich Mean Time ») et la\n"
-"convertit dans l'heure locale à partir du fuseau horaire sélectionné."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-"X (pour le X Window system) est le coeur de votre interface graphique sous\n"
-"GNU/Linux. Tous les environnement graphiques (Gnome, KDE, Afterstep, ...)\n"
-"présents sur Mandrake Linux dépendent de X. A cette étape, DrakX, va tenter\n"
-"de le configurer automatiquement.\n"
-"\n"
-"Il est très rare que cette étape échoue, à moins d'avoir un équipement\n"
-"obsolète (ou trop récent). Si le processus réussit, il va démarrer X\n"
-"automatiquement avec la meilleur résolution d'écran possible, en fonction\n"
-"de la taille du moniteur. Une fenêtre apparaît alors vous demandant si\n"
-"cette configuration vous convient.\n"
-"\n"
-"Si vous faites une installation « Expert », vous entrerez dans\n"
-"l'information de configuration de X. Voir les sections correspondantes du\n"
-"manuel pour plus d'information.\n"
-"\n"
-"Si vous pouvez voir le message et cliquez sur oui, DrakX continuera à la\n"
-"prochaine étape. Si vous ne pouvez voir la fenêtre, ceci signifie que le\n"
-"test a échoué et vous serez ramené à l'écran précédant en 10 secondes."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Il se peut que vous ne soyez pas entièrement satisfait à la première\n"
-"tentative de configuration graphique (écran trop petit, peu de\n"
-"couleurs...). Ainsi, même si X démarre correctement, DrakX vous demande si\n"
-"la configuration vous convient. Il proposera aussi de la changer en\n"
-"affichant une liste des modes valides, si possible.\n"
-"\n"
-"En dernier recours, si vous ne pouvez pas faire fonctionner X, choisissez\n"
-"« Changer la carte graphique », sélectionnez « carte non listée », et\n"
-"lorsqu'il vous sera demandé le serveur graphique, choisissez « FBDev ».\n"
-"c'est une option de secours qui fonctionnera sur n'importe quelle carte\n"
-"graphique moderne. Choisissez ensuite « Tester à nouveau » pour vous\n"
-"assurer que tout va bien."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Finalement, il vous sera demandé si vous souhaitez obtenir l'interface\n"
-"graphique dès le démarrage ou non. Notez que cette question sera posée,\n"
-"mais même si vous choisissez de ne pas tester la configuration. Il est\n"
-"évidemment souhaitable de répondre « Non » si cette machine est un serveur\n"
-"sur laquelle personne n'est censée travailler en mode graphique."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Le CDROM d'installation de Mandrake Linux a un mode de récupération\n"
-"pré-défini. Vous pouvez y accéder en démarrant l'ordinateur sur le CDROM.\n"
-"Selon la version de votre « BIOS », il faut lui spécifier de démarrer sur\n"
-"le CDROM. Vous devriez revenir au disquette de démarrage dans deux cas\n"
-"précis :\n"
-"\n"
-" * Au moment d'installer le « Programme d'amorce », DrakX va ré-écrire sur\n"
-"le secteur (MBR) contenant le programme d'amorce (boot loader) afin de vous\n"
-"permettre de démarrer avec Linux ou Windows (en prenant pour acquis que\n"
-"vous avez deux systèmes d'exploitation installé. Si vous réinstallez\n"
-"Windows, celui-ci va ré-écrire sur le MBR et il vous sera désormais\n"
-"impossible de démarrer Linux.\n"
-"\n"
-" * Si un problème survient et qu'il vous est impossible de démarrer\n"
-"GNU/Linux à partir du disque dur, cette disquette deviendra votre seul\n"
-"moyen de démarrer votre système Linux. Elle contient un bon nombre d'outils\n"
-"pour récupérer un système défectueux, peu importe la source du problème.\n"
-"\n"
-"En cliquant sur cette étape, on vous demandera d'insérer une disquette. La\n"
-"disquette insérée sera complètement effacée et DrakX se chargera de la\n"
-"formater et d'y insérer les fichiers nécessaires."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Cette étape vous permet de déterminer précisément l'emplacement de votre\n"
-"installation de Mandrake Linux. Si votre disque est vide ou utilisé par un\n"
-"autre système d'exploitation, vous devrez repartitionner votre disque.\n"
-"Partitionner un disque signifie de le diviser précisément afin de créer un\n"
-"espace pour votre installation.\n"
-"\n"
-"Comme les effets du partition sont irréversibles (l'ensemble du disque est\n"
-"effacé), le partitionnement est généralement intimidant et stressant pour\n"
-"un utilisateur inexpérimenté. Heureusement, une interface a été prévue à\n"
-"cet effet. Avant de commencer, réviser vos manuels et, surtout, prenez\n"
-"votre temps.\n"
-"\n"
-"Si vous êtes en mode expert, l'application DiskDrake, l'outil de\n"
-"partitionnement de Mandrake Linux, vous permettra de déterminer précisément\n"
-"l'emplacement de chacune de vos partitions. À partir de l'interface\n"
-"d'installation, vous pouvez lancer les assistants en cliquant sur\n"
-"« Assistant ».\n"
-"\n"
-"Si des partitions ont déjà été définies, peu importe qu'elles proviennent\n"
-"d'une autre installation ou d'un autre outil de partitionnement, il vous\n"
-"suffit de simplement choisir sur quelle partition vous voulez installer\n"
-"Mandrake.\n"
-"\n"
-"Si vos partitions ne sont pas définies, vous devrez les créer en utilisant\n"
-"le assistant. Selon la configuration de votre disque, plusieurs options\n"
-"sont disponibles :\n"
-"\n"
-" * « Utilisez l'espace disponible »: cette option tentera simplement de\n"
-"partitionner automatiquement l'espace inutilisé sur votre disque. Il n'y\n"
-"aura pas d'autres question.\n"
-"\n"
-" * « Utiliser les partitions existantes »: le assistant a détecté une ou\n"
-"plusieurs partitions existants sur votre disque. Si vous voulez les\n"
-"utiliser, choisissez cette option.\n"
-"\n"
-" * « Utilisez l'espace libre sur une partition Windows » : si Microsoft\n"
-"Windows est installé sur votre disque et prend l'ensemble de l'espace vous\n"
-"devez créer une place pour votre installation Mandrake. Pour ce faire, vous\n"
-"pouvez tout effacer (voir \"effacer tout le disque\" ou \"Mode expert\") ou\n"
-"vous pouvez redimensionner l'espace utilisé par Windows. Cette seconde\n"
-"option peut être accomplie sans perte de donnée. Cette solution est\n"
-"recommandée pour faire cohabiter Linux et Windows sur le même ordinateur.\n"
-"\n"
-"   Avant de choisir cette option, il faut comprendre qu'après cette "
-"procédure\n"
-"l'espace disponible pour Windows sera réduit. Vous aurez moins d'espace\n"
-"pour installer des logiciels ou sauvegarder de l'information avec Windows.\n"
-"\n"
-" * « Effacer tout le disque »: si vous voulez effacer toutes les données et\n"
-"les applications installée sur votre système et les remplacer par votre\n"
-"nouveau système Mandrake Linux, choisissez cette option. Soyez prudent, car\n"
-"ce choix est irréversible et permanent. Il vous sera impossible de\n"
-"retrouver vos données effacées.\n"
-"\n"
-"   !! En choisissant cette options, l'ensemble du contenu de votre disque "
-"sera\n"
-"détruit. !!\n"
-"\n"
-" * « Supprimer Microsoft Windows »: ce choix effacera tout simplement ce "
-"que\n"
-"contient le disque et recommencera à zéro. Toutes les données et les\n"
-"programmes contenu sur le disque seront effacées.\n"
-"\n"
-"   !! En choisissant cette option, l'ensemble de votre disque sera "
-"effacer. !!\n"
-"\n"
-" * « Mode expert »: permet de partitionner manuellement votre disque. Soyez\n"
-"prudent, parce que bien que plus puissante, cette option est dangereuse.\n"
-"Vous pouvez facilement perdre l'ensemble du contenu d'un disque. Donc, ne\n"
-"choisissez pas cette option si vous ne savez pas exactement ce que vous\n"
-"devez faire."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Voilà, vous y êtes! Votre installation de Mandrake Linux est maintenant\n"
-"terminée et votre système est prêt à être utilisé. Cliquez sur « OK » pour\n"
-"redémarrer votre système. Vous aurez alors le choix de démarrer GNU/Linux\n"
-"ou Windows (s'il est présent).\n"
-"\n"
-"Le bouton « Avancée » (en mode Expert uniquement) permet deux autres\n"
-"options:\n"
-"\n"
-" * « Générer une disquette d'auto-install »: Pour créer une disquette\n"
-"d'installation qui permettra de reproduire l'installation que vous venez de\n"
-"réaliser sans l'aide d'un administrateur.\n"
-"\n"
-"   Notez que les deux options suivantes apparaissent après avoir cliqué sur "
-"le\n"
-"bouton:\n"
-"\n"
-"    * « Replay ». C'est une installation partiellement automatique où il "
-"est\n"
-"possible de personnaliser le partitionnement du disque (exclusivement).\n"
-"\n"
-"    * « Automatique ». Complètement automatique, cette installation "
-"reformate\n"
-"le disque au complet.\n"
-"\n"
-"   Cette fonctionnalité est particulièrement pratique pour l'installation "
-"de\n"
-"multiples systèmes. Voir le sectionAuto install de notre site Web.\n"
-"\n"
-" * « Sauvegarder les paquetages sélectionnés »(*) sauve la sélection des\n"
-"paquetages installés. Puis, lorsque vous ferez une autre installation,\n"
-"insérer la disquette dans le lecteur et accéder au menu d'aide en tapant\n"
-"[f1], et entrez la commande suivante: « linux defcfg=\"floppy\" ».\n"
-"\n"
-"(*) Vous avez besoin d'une disquette formatée avec FAT (pour la créer sous\n"
-"Linux, tapez « mformat a: »)"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Chaque partition nouvellement définie doit être formatée, c'est à dire\n"
-"qu'un système de fichier (filesystem) doit y être créé.\n"
-"\n"
-"À cette étape, vous pouvez également choisir de reformater d'autres\n"
-"partitions existantes afin d'effacer les données qu'elle contiennent. Si\n"
-"c'est ce que vous désirez, il faut également choisir ces partitions.\n"
-"\n"
-"Sachez qu'il n'est pas nécessaire de reformater toutes les partitions\n"
-"existantes. Vous devez reformater les partitions contenant le système\n"
-"d'exploitation, (tel que : « / », « /usr » ou « /var ») mais vous n'avez\n"
-"pas à reformater les partitions de données que vous voulez garder,\n"
-"habituellement « /home ».\n"
-"\n"
-"Restez prudent au moment de sélectionner les partitions. Une fois formatée,\n"
-"toute les données contenues sur les partitions sélectionnées seront\n"
-"détruites et il sera impossible de les récupérer.\n"
-"\n"
-"Cliquez sur « OK » lorsque vous être prêt à formater vos partitions.\n"
-"\n"
-"Cliquez sur « Annuler » si vous voulez choisir d'autres partitions pour\n"
-"votre installation.\n"
-"\n"
-"Cliquez sur « Avancé », si vous désirez choisir les partitions qui seront\n"
-"vérifiés pour des secteurs corrompus."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Votre nouveau système Mandrake Linux est maintenant en cours\n"
-"d'installation. Selon le nombre de paquetages à installer et la puissance\n"
-"de votre ordinateur, cette opération peur prendre de quelques minutes à\n"
-"quelques heures.\n"
-"\n"
-"Merci d'être patient."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"Avant d'aller plus loin, il est fortement recommandé de lire attentivement\n"
-"les termes et conditions d'utilisations de la licence. Celle-ci régit\n"
-"l'ensemble de la distribution Mandrake Linux. Si, pour une raison ou une\n"
-"autre, vous n'acceptez pas ces conditions, cliquez sur « Refuser ».\n"
-"L'installation sera alors immédiatement interrompue. Pour continuer,\n"
-"cliquez sur « Accepter »."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"À cette étape, vous devrez déterminer le niveau de sécurité requis par\n"
-"votre système. Le niveau de sécurité requis se détermine en fonction de\n"
-"l'exposition du système à d'autres utilisateurs (s'il est connecté\n"
-"directement sur interne par exemple) et selon le niveau de sensibilité de\n"
-"l'information contenu dans le système (des numéros de carte de crédit par\n"
-"exemple). Sachez que, de manière générale, plus la sécurité d'un système\n"
-"est élevée, plus il est complexe à opérer. Référez-vous au chapitre\n"
-"chapitre MSEC du Manuel de références pour obtenir plus d'informations sur\n"
-"les niveaux de sécurité.\n"
-"\n"
-"Si vous ne savez pas quel niveau choisir, gardez la sélection par défaut."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Vous devez maintenant choisir sur quelle(s) partition(s) vous désirez\n"
-"installer votre nouveau système Mandrake Linux. Si des partitions ont été\n"
-"précédemment créées (lors de l'installation d'un système GNU/Linux ou à\n"
-"l'aide d'un autre outil de partitionnement), vous pouvez utiliser ces\n"
-"partitions. Si aucune partition n'a été créée, vous devez le faire\n"
-"maintenant.\n"
-"\n"
-"Si vous possédez plus d'un disque dur, vous devez tout d'abord en\n"
-"sélectionner un. Pour ce, cliquez sur « hda » pour le disque maître\n"
-"sur la première nappe IDE, « hdb » pour le disque esclave sur la seconde\n"
-"nappe IDE, « sda » pour le premier disque SCSI, etc.\n"
-"\n"
-"Pour partitionner le disque sélectionné, vous pouvez utiliser les options\n"
-"suivantes :\n"
-"\n"
-"   * Tout supprimer : pour supprimer toutes les partitions présentes\n"
-"sur votre disque dur.\n"
-"\n"
-"   * Partitionnement automatique : pour créer automatiquement des\n"
-"partitions Ext2 et swap dans l'espace libre de votre disque dur.\n"
-"\n"
-"   * Restaurer la table des partitions : si votre table des partitions est\n"
-"endommagée, vous pouvez essayer de la restaurer en utilisant cette option.\n"
-"Soyez très prudent en l'utilisant et ayez à l'esprit que la restauration\n"
-"peut échouer.\n"
-"\n"
-"   * Défaire : vous pouvez utiliser cette option pour annuler vos\n"
-"modifications.\n"
-"\n"
-"   * Recharger : vous pouvez utiliser cette option si vous désirez annuler\n"
-"tous vos modifications en rechargeant votre table des partitions initiale.\n"
-"\n"
-"   * Assistant : si vous désirez utiliser un assistant pour partitionner\n"
-"votre disque dur, vous pouvez utiliser cette option. Cette dernière est\n"
-"recommandée si vous n'avez pas une grande expérience en partitionnement.\n"
-"\n"
-"   * Restaurer à partir d'une disquette : si vous avez sauvegardé votre\n"
-"table des partitions sur une disquette lors d'une précédente installation,\n"
-"vous pouvez la restaurer en utilisant cette option.\n"
-"\n"
-"   * Sauvegarder sur une disquette : si vous désirez enregistrer votre\n"
-"table des partitions sur une disque afin d'avoir la possibilité de la\n"
-"restaurer, vous pouvez utiliser cette option. Il vous est fortement\n"
-"recommandé de procéder à une telle sauvegarde.\n"
-"\n"
-"   * Terminer : lorsque vous aurez fini de partitionner votre disque dur,\n"
-"utilisez cette option pour enregistrer vos modifications.\n"
-"\n"
-"Pour information, vous pouvez accéder à toutes ces options en utilisant le\n"
-"clavier. Pour passer d'une partition à une autre, vous pouvez utiliser les\n"
-"touches « Tab », « haut » et « bas ».\n"
-"\n"
-"Lorsqu'une partition est sélectionnée, vous pouvez utiliser les\n"
-"combinaisons de touches suivantes :\n"
-"\n"
-"   * Ctrl-c pour créer une nouvelle partition (lorsqu'une partition vide "
-"est\n"
-"     sélectionnée),\n"
-"   * Ctrl-d pour supprimer une partition,\n"
-"   * Ctrl-m pour lui attribuer un point de montage.\n"
-"\n"
-"Si vous installez sur une machine PowerPC, vous devrez créer une petite\n"
-"partition HFS de « bootstrap » d'au moins 1 Mo pour le chargeur de\n"
-"démarrage yaboot. Si vous choisissez de créer la partition avec une taille\n"
-"un peu plus importante, par exemple 50 Mo, vous pourrez trouver cet endroit\n"
-"pratique pour stocker un autre kernel et une image ramdisk de secours,\n"
-"par exemple."
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Plus d'une partition Microsoft Windows a été détectée sur votre disque dur.\n"
-"Veuillez choisir celle que vous désirez redimensionner pour installer votre\n"
-"nouveau système d'exploitation Mandrake Linux.\n"
-"\n"
-"Pour information, chaque partition est décrite comme suit :\n"
-"« Nom Linux », « Nom Windows », « Capacité ».\n"
-"\n"
-"Le champ « Nom linux  » est codé comme suit : « type du disque dur »,\n"
-"« numéro du disque dur », « numéro de la partition » (par exemple,\n"
-"« hda1 »).\n"
-"\n"
-"Le champ « type du disque dur » correspond à « hd » si votre disque dur\n"
-"est un disque dur IDE ou « sd » s'il s'agit d'un disque SCSI.\n"
-"\n"
-"Avec un disque dur IDE,\n"
-"   * « a » signifie « disque maître sur la première nappe IDE »,\n"
-"   * « b » signifie « disque esclave sur la première nappe IDE »,\n"
-"   * « c » signifie « disque maître sur la seconde nappe IDE »,\n"
-"   * « d » signifie « disque esclave sur la seconde nappe IDE ».\n"
-"\n"
-"Avec un disque dur SCSI, un « a » signifie « premier disque dur »,\n"
-"« b » signifie « second disque dur », etc. »\n"
-"\n"
-"Le champ « Nom Windows » correspond à la lettre identifiant votre disque\n"
-"dur sous Microsoft Windows (le premier disque (ou la première partition)\n"
-"est appelé « C: »)."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Veuillez patienter. Cette opération peut prendre plusieurs minutes."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"DrakX doit maintenant savoir quel type d'installation vous désirez\n"
-"réaliser. Deux types d'installation sont proposés : Par défaut (« \n"
-"Recommandée »), qui limite le nombre de questions à l'utilisateur au\n"
-"minimum ou « Expert » qui vous permet de sélectionner individuellement\n"
-"chacune des composantes à installées. Également, on vous propose de faire\n"
-"une « Installation » ou une « Mise à jour ». L'installation effacera\n"
-"complètement ce qui est inscrit sur le disque d'installation, alors que la\n"
-"mise à jour tentera de trouver un système Linux et, essayera d'installer la\n"
-"version la plus récente des applications en place. Vous pouvez également\n"
-"utiliser le mode « Mise à jour » pour restaurer un système défectueux\n"
-"\n"
-"Veuillez choisir «  Installation » s'il n'y a aucune installation de Linux\n"
-"Mandrake présente sur votre ordinateur ou si vous voulez pouvoir démarrer\n"
-"plusieurs systèmes d'exploitation sur le même PC.\n"
-"\n"
-"Selon votre niveau d'expertise avec les systèmes d'exploitations GNU/Linux,\n"
-"il faut choisir l'un des deux types d'installation suivants:\n"
-"\n"
-" * « Recommandée »: choisissez cette option si vous n'avez jamais installée\n"
-"un système d'exploitation GNU/Linux. C'est la méthode la plus facile, la\n"
-"plupart des choix ont déjà été fait pour vous.\n"
-"\n"
-" * Expert: si vous avez une bonne connaissance de GNU/Linux, vous pouvez\n"
-"choisir ce type d'installation. Cette méthode vous permettra de\n"
-"personnaliser l'ensemble des composantes de votre système. Ces questions\n"
-"peuvent s'avérer complexes, particulièrement en matière de partitionnement\n"
-"et du choix des paquetages installés. En conséquence, il n'est pas\n"
-"recommandé de s'y aventurer sans de bonnes connaissances au préalable."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalement, DrakX sélectionne le clavier approprié en fonction de la\n"
-"langue choisie et vous ne devriez pas voir cette étape. Cela dit, il est\n"
-"possible que vous ayez un clavier ne correspondant pas exactement à votre\n"
-"langue d'utilisation. Par exemple, si vous habitez le Québec et parlez le\n"
-"français et l'anglais, vous pouvez vouloir avoir votre clavier anglais pour\n"
-"les tâches d'administration système et votre clavier français pour écrire\n"
-"de la poésie. Dans ces cas, il vous faudra revenir à cette étape\n"
-"d'installation et sélectionner un autre clavier à partir de la liste.\n"
-"\n"
-"Vous n'avez qu'a choisir la disposition de clavier qui vous convient.\n"
-"\n"
-"Cliquez sur « More » pour voir toutes les options proposées."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-"Veuillez choisir votre langue de communication. Celle-ci sera utilisée\n"
-"durant le processus d'installation, ainsi que durant les mises à jour de\n"
-"votre système.\n"
-"\n"
-"En cliquant sur « Avancé », le programme vous proposera également d'autres\n"
-"langues pouvant être installées sur votre station de travail. En\n"
-"choisissant d'autres langues, le programme vous installera toute la\n"
-"documentation et les applications nécessaires à l'utilisation de cette\n"
-"autre langue. Par exemple, si vous prévoyez accueillir des utilisateurs\n"
-"d'Espagne sur votre serveur, choisissez l'anglais comme langue principale,\n"
-"et, dans la section avancée, cliquez sur l'étoile grise correspondant à\n"
-"Spanish|Spain.\n"
-"\n"
-"Sachez que plusieurs langues peuvent être installées. Une fois votre\n"
-"sélection complète terminée, cliquez sur « OK » pour continuer."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-"Par défaut, DrakXprend pour acquis que vous avez une souris à deux boutons\n"
-"et, configurera l'émulation du troisième bouton. Également, DrakX saura\n"
-"automatiquement, si vous avez une souris PS/2, série ou USB.\n"
-"\n"
-"Si vous désirez installer une souris différente, veuillez la sélectionner à\n"
-"partir de la liste qui vous est proposée.\n"
-"\n"
-"Si vous sélectionnez une souris différente de celle choisie par défaut,\n"
-"DrakX vous présentera un écran de test. Utilisez les boutons et la roue\n"
-"pour vous assurer que tout fonctionne correctement. Si votre souris ne\n"
-"fonctionne par normalement, appuyer sur la barre d'espacement ou RETURN ou\n"
-"encore annuler, puis, sélectionner une autre souris."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Veuillez sélectionner le bon port. Par exemple, le port « COM1 » sous\n"
-"Microsoft Windows se nomme « ttyS0 » sous GNU-Linux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Vous avez à prendre ici une décision cruciale pour la sécurité de votre\n"
-"système. L'utilisateur « root » est l'administrateur du système qui a tous\n"
-"les droits d'accès au fichiers de configurations, etc. Il est donc\n"
-"impératif de choisir un mot de passe difficile à deviner (pensez aux\n"
-"systèmes prévus à cet effet qui anticipent les combinaisons communes des\n"
-"utilisateurs). DrakX vous avertira si le mot de passe entré est trop facile\n"
-"à deviner. Comme vous pouvez le voir, il est également possible de ne pas\n"
-"entrer de mot de passe. Nous déconseillons fortement cette pratique. Comme\n"
-"l'erreur est humaine, un utilisateur avec tous les droits peut tout\n"
-"détruire sur votre système, c'est pourquoi le mot de passe doit agir comme\n"
-"barrière à l'entrée.\n"
-"\n"
-"Le mot de passe choisi devrait contenir au moins 8 caractères\n"
-"alphanumériques. Ne jamais écrire un mot de passe, forcez-vous à vous en\n"
-"souvenir par coeur. Il faut donc ménager accessibilité et mémoire, donc un\n"
-"mot de passe de 30 caractères est presque impossible à mémoriser.\n"
-"\n"
-"Afin d'éviter les regards indiscrets, le mot de passe n'apparaîtra pas à\n"
-"l'écran. Il vous faudra donc l'inscrire deux fois afin d'éviter les erreurs\n"
-"de frappe. Évidemment, si vous faites deux fois la même erreur, celle-ci\n"
-"sera sauvegardée et vous devrez la reproduire afin d'accéder à votre\n"
-"système pour la première fois.\n"
-"\n"
-"En mode expert, on vous demandera si vous comptez vous connecter sur un\n"
-"serveur d'authentification, tel que NIS ou LDAP. Si votre réseau utilise un\n"
-"de ces protocoles, il faut le sélectionner. Si vous n'en avez aucune idée,\n"
-"demandez à votre administrateur de réseau.\n"
-"\n"
-"Si votre ordinateur n'est pas connecté sur un réseau administré, vous devez\n"
-"choisir « Fichiers Locaux » pour l'authentification."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-"LILO et GRUB sont deux programmes d'amorce pour GNU/Linux. Cette étape est\n"
-"normalement complètement automatique. En fait, DrakX analyse de le secteur\n"
-"de démarrage (master boot record) et agit en fonction de ce qu'il peut y\n"
-"lire:\n"
-"\n"
-" * Si un secteur de démarrage Windows est détecté, il va être remplacer par\n"
-"LILO/GRUB. Donc, vous serez capable de démarrer GNU/Linux et tout autre\n"
-"système d'exploitation.\n"
-"\n"
-" * si GRUB ou LILO est détecté, il sera remplacé par la nouvelle version;\n"
-"\n"
-"En cas de doute, DrakX affiche différentes options.\n"
-"\n"
-" * « Principales option du chargeur de démarrage »: vous propose trois\n"
-"choix:\n"
-"\n"
-"    * « LILO avec des menus graphiques »: si vous préférez l'interface\n"
-"graphique.\n"
-"\n"
-"    * « GRUB »: si vous préférer GRUB (menu texte).\n"
-"\n"
-"    * « LILO avec des menus textes »: si vous préférer la version texte de\n"
-"LILO.\n"
-"\n"
-" * « Périphériques de démarrage »: dans la plupart des cas, vous n'aurez "
-"pas\n"
-"à changer le disque par défaut (« /dev/hda », mais si vous le désirez, le\n"
-"programme d'amorce peut être installé sur un second disque, « /dev/hdb »,\n"
-"ou même sur une disquette, « /dev/fd0 ».\n"
-"\n"
-" * « Délais avant l'activation du choix par défaut »: au redémarrage de\n"
-"l'ordinateur, il s'agit du temps accordé à l'utilisateur pour démarrer un\n"
-"autre système d'exploitation.\n"
-"\n"
-"!! Prenez garde, si vous décider de ne pas installer de programme d'amorce\n"
-"(en cliquant sur « Annuler »), vous devez vous assurez d'avoir une méthode\n"
-"pour démarrer le système. Aussi, assurez vous de bien savoir ce que vous\n"
-"faites si vous modifiez les options. !!\n"
-"\n"
-"En cliquant sur « Avancée », vous aurez accès à plusieurs autres options de\n"
-"configuration. Sachez que celles-ci sont réservées aux experts en la\n"
-"matière.\n"
-"\n"
-"Si vous avez d'autres systèmes d'exploitation installés sur votre\n"
-"ordinateur, ils seront automatiquement détectés et ajouter à vos menus de\n"
-"démarrage. À cette étape, vous pouvez décider de préciser ces options. En\n"
-"double-cliquant sur une entrée existante vous pourrez la paramétrer à votre\n"
-"guise, ou l'enlever. « Ajouter » permet de créer de nouvelles entrées, et\n"
-"« terminer » vous conduit à la prochaine étape d'installation."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) et Grub sont des chargeurs de démarrage : ils sont\n"
-"capables de démarrer GNU-Linux ou tout autre système d'exploitation présent\n"
-"sur votre ordinateur. La plupart du temps, ces autres systèmes\n"
-"d'exploitation sont correctement détectés et installés. Si tel n'est pas\n"
-"le cas, vous avez maintenant la possibilité d'indiquer les paramètres\n"
-"requis. Faîtes attention à l'exactitude des paramètres.\n"
-"\n"
-"Vous pouvez également souhaiter que tout un chacun ne puisse pas démarrer\n"
-"ces systèmes d'exploitation. Si tel est le cas vous pouvez supprimer les\n"
-"entrées correspondantes. Veuillez noter que vous aurez alors besoin d'une\n"
-"disquette de démmarage appropriée pour démarrer les systèmes d'exploitation\n"
-"dont vous aurez supprimé les entrées."
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Vous devez maintenant indiquer où vous désirez placer l'information\n"
-"requise au démarrage de GNU-Linux.\n"
-"\n"
-"À moins que vous ne sachiez exactement ce que vous faites, choisissez\n"
-"toujours « Premier secteur du disque (MBR) »."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX détecte maintenant tous les périphériques IDE présents sur votre\n"
-"système. Également, DrakX recherchera les périphériques SCSI. Finalement,\n"
-"selon les composantes détectées, DrakX installera tous les pilotes\n"
-"nécessaires à son fonctionnement.\n"
-"\n"
-"Compte tenu de la vaste gamme de périphériques disponibles sur le marché,\n"
-"dans certain cas la détection de matériel ne fonctionnera pas. Dans ce cas,\n"
-"DrakX vous demandera de confirmer si des composantes SCSI sont présentes\n"
-"sur votre système. Cliquez sur « Oui » si vous êtes certain d'avoir un\n"
-"périphérique SCSI sur votre système. DrakX vous présentera alors une liste\n"
-"de carte SCSI disponibles. Sélectionnez la vôtre. Évidement, cliquez sur\n"
-"« Non », si vous n'en avez pas. Si vous n'êtes pas certain, cliquez sur\n"
-"« Voir les informations sur le matériel », puis sur « OK ». Vérifiez la\n"
-"liste du matériel, puis cliquez sur « OK » pour retourner à la question\n"
-"concernant les périphériques SCSI.\n"
-"\n"
-"Si vous devez spécifier votre carte SCSI manuellement, DrakX vous demandera\n"
-"de confirmer les options du périphérique. Vous devriez permettre à DrakX de\n"
-"vérifier automatiquement votre carte pour les options nécessaires à\n"
-"déterminer. Le processus fonctionne généralement bien.\n"
-"\n"
-"Il peut arriver que DrakX soit incapable de vérifier les options\n"
-"nécessaires. Dans ce cas, vous devrez les déterminer manuellement.\n"
-"Consultez le guide d'utilisation (Chapitre 3, section \"Obtenir des\n"
-"informations sur votre matériel\") pour quelques astuces pour retrouver les\n"
-"paramètres nécessaires dans la documentation de vos périphériques, sur le\n"
-"site du fabricant (si vous avez un accès à Internet) ou à partir des menus\n"
-"de Microsoft Windows (si vous utilisiez ce périphérique avec Windows)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Vous pouvez ajouter des entrées additionnelles pour yaboot, pour\n"
-"d'autres systèmes d'exploitation, des noyaux alternatifs, ou pour\n"
-"une disquette de démarrage de secours.\n"
-"\n"
-"\n"
-"Pour les autres systèmes, l'entrée consiste seulement en un titre et \n"
-"la partition de démarrage.\n"
-"\n"
-"Pour Linux, il y a quelques options possibles :\n"
-"\n"
-"\n"
-"  - Label : C'est simplement le nom à taper à l'invité yaboot pour choisir\n"
-"cette option de démarrage.\n"
-"\n"
-"\n"
-"  - Image : C'est le nom du noyau à démarrer. Habituellement vmlinux\n"
-"ou une variation de vmlinux avec une extension\n"
-"\n"
-"\n"
-"  - Root : Le périphérique racine ou « / » pour votre installation Linux\n"
-"\n"
-"\n"
-"  - Append : Sur le matériel Apple, l'option append du noyau est utilisée\n"
-"assez souvent pour aider à l'initialisation du matériel graphique, ou pour\n"
-"activer l'émulation par le clavier des boutons de la souris quand les "
-"deuxième\n"
-"et troisième boutons sont absents, comme souvent sur les souris Apple.\n"
-"Ci-dessous quelques exemples :\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-"\n"
-"  - Initrd : Cette option peut être utilisée soit pour charger initialement\n"
-"des modules, avant la disponibilité du périphérique de démarrage, soit\n"
-"pour charger une image ramdisk for une situation de démarrage de secours\n"
-"\n"
-"\n"
-"  - Initrd-size : La taille par défaut de l'image ramdisk est généralement "
-"de\n"
-"4096 octets. Si vous avez besoin d'allouer un grand ramdisk, cette option "
-"peut\n"
-"être utilisée.\n"
-"\n"
-"  - Lecture/Écriture : Normalement la partition racine est appelée "
-"initialement en\n"
-"lecture seule, cela pour permettre une vérification du système de fichier "
-"avant\n"
-"que le système soit actif. Vous pouvez forcer cette option ici.\n"
-"\n"
-"\n"
-"  - NoVideo : Puisque le matériel vidéo Apple se montre particulièrement\n"
-"problématique, si vous rencontrez des difficultés, vous pouvez sélectionner\n"
-"cette option pour démarrer en « novideo » mode, avec support du framebuffer\n"
-"natif.\n"
-"\n"
-"\n"
-"  - Défaut : Donne à cette entrée le statut « par défaut », sélectionnable\n"
-"simplement en pressant ENTRÉE à l'invité yaboot. Cette entrée sera aussi\n"
-"mise en valeur par un « * », si vous pressez TAB pour voir les choix de\n"
-"démarrage."
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot est un chargeur de démarrage pour les machines de type NewWorld\n"
-"MacIntosh. Il est capable to démarrer GNU/Linux, MacOS, ou MacOSX, si\n"
-"ces systèmes sont présents sur votre ordinateur. Normalement, ces autres\n"
-"systèmes d'exploitation sont correctement détectés et installés. Si ce\n"
-"n'est pas le cas, vous pouvez ajouter l'entrée correspondante à la main\n"
-"sur cet écran. Veuillez faire attention de choisir les bons paramètres.\n"
-"\n"
-"\n"
-"Les principales options de Yaboot sont :\n"
-"\n"
-"\n"
-"  - Message de démarrage : un simple message texte, affiché avant l'invite\n"
-"de démarrage.\n"
-"\n"
-"\n"
-"  - Périphérique de démarrage : indique où vous souhaitez mettre les\n"
-"informations nécessaires au démarrage de GNU/Linux. Généralement, vous\n"
-"aurez configuré auparavant une partition de « bootstrap » pour contenir\n"
-"ces informations.\n"
-"\n"
-"\n"
-"  - Délai de l'Open Firmware : à la différence de LILO, il y a deux\n"
-"délais disponibles avec Yaboot. Le premier est mesuré en secondes,\n"
-"et à ce moment-là vous pouvez choisir parmi CD, OF, MacOS, ou Linux.\n"
-"\n"
-"\n"
-"  - Délai du démarrage du noyau : ce délai est similaire à celui de\n"
-"LILO. Après avoir sélectionné Linux, vous aurez ce délai (en dixièmes\n"
-"de seconde) avant d'accepter les paramètres noyau par défaut.\n"
-"\n"
-"\n"
-"  - Autoriser le démarrage sur CD ? : si vous activez cette option, vous\n"
-"pourrez choisir 'C', pour le CD, à la première invite de démarrage.\n"
-"\n"
-"\n"
-"  - Autoriser le démarrage sur l'OF ? : si vous activez cette option, vous\n"
-"pourrez choisir 'N' pour l'Open Firmware à la première invite de\n"
-"démarrage.\n"
-"\n"
-"\n"
-"  - OS par défaut : vous pouvez sélectionner quel OS démarrera par\n"
-"défaut lorsque le délai de l'Open Firmware expirera."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-"On vous présente ici les différents paramètres de votre système. Selon le\n"
-"matériel installé, certaines entrées seront présentes et d'autres pas.\n"
-"\n"
-" * « Souris »: Souris pour vérifier la configuration actuelle de la souris.\n"
-"Cliquez sur le bouton pour modifier les options.\n"
-"\n"
-" * « Clavier »: Clavier vérifie la configuration choisie pour le clavier.\n"
-"Cliquez sur le bouton pour la modifier.\n"
-"\n"
-" * « Fuseau horaire »: Fuseau horaireDrakX, par défaut, essaie de trouver "
-"le\n"
-"fuseau horaire dans lequel vous êtes. Encore une fois, il est possible que\n"
-"vous ne soyez pas dans le fuseau horaire qui vous convient. Donc, vous\n"
-"aurez peut-être à cliquer sur le bouton « fuseau horaire » pour identifier\n"
-"précisément l'heure qui doit apparaître dans vos horloges.\n"
-"\n"
-" * « Imprimante »: en cliquant sur « Pas d'imprimante », l'outil de\n"
-"configuration sera démarré.\n"
-"\n"
-" * « Carte son »: si une carte son a été détectée, elle apparaîtra ici.\n"
-"Aucune modification n'est possible à cette étape.\n"
-"\n"
-" * « Carte TV »: si une carte d'entrée/sortie vidéo (carte TV) a été\n"
-"détectée, elle apparaîtra ici. Aucune modification possible à cette étape.\n"
-"\n"
-" * « Carte ISDN »: si une carte ISDN est détectée, elle apparaîtra ici. "
-"Vous\n"
-"pouvez cliquer sur le bouton pour en modifier les paramètres."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Choisissez le disque dur que vous souhaitez effacer pour installer votre\n"
-"nouvelle partition Mandrake Linux. Soyez prudent, toutes les données\n"
-"présentes sur ce disque seront perdues et ne seront pas récupérables !"
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Cilquez sur « OK » si vous désirez supprimer toutes les données et\n"
-"partitions présentes sur ce disque dur. Soyez prudent. Après avoir cliqué\n"
-"sur « OK », vous n'aurez aucun moyen de récupérer ces données et\n"
-"partitions. Cet avertissement concerne également les données de Microsoft\n"
-"Windows."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-"Impossible d'accèder aux modules noyau correspondants à votre noyau (le "
-"fichier %s est manquant)"
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Vous avez sélectionné le(s) serveur(s) suivant(s) : %s\n"
-"\n"
-"\n"
-"Ces serveurs sont activés par défaut. Ils n'ont pas de trou\n"
-"de sécurité connu, mais de nouveaux problèmes peuvent\n"
-"apparaître. Dans ce cas, vous devez vous assurer de mettre\n"
-"à jour vos serveurs le plus rapidement possible.\n"
-"\n"
-"\n"
-"Voulez-vous vraiment installer ces serveurs ?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "On ne peut pas utiliser l'option broadcast sans domaine NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Insérez une disquette formattée en FAT dans le lecteur %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Cette disquette n'est pas formattée en FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Pour utiliser cette sauvegarde de la sélection des paquetages, veuillez "
-"démarrer l'installation avec « linux defcfg=floppy »"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Erreur lors de la lecture du fichier %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Certains périphériques présents sur votre système nécessitent des pilotes\n"
-"« propriétaires » pour pouvoir fonctionner. Vous pouvez trouver plus\n"
-"d'informations les concernant ici : %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Vous devez avoir une partition racine.\n"
-"Pour la définir, créez une partition (ou choisissez-en une déjà\n"
-"existante) puis, dans la rubrique « Choisissez une action », cliquez\n"
-"sur « Point de montage » et choisissez « / »."
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Vous devez créer une partition de swap"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Vous n'avez pas de partition de swap.\n"
-"\n"
-"Désirez-vous tout de même continuer ?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Vous devez disposer d'une partition FAT monté en /boot/efi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Utiliser l'espace disque"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Pas assez d'espace libre pour créer de nouvelles partitions"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Utiliser les partitions existantes"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Pas de partitions existantes à utiliser"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Utiliser la partition Windows pour le loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Quelle partition désirez-vous utiliser pour Linux4Win ?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Choix des tailles"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Taille de la partition racine en Mo : "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Taille de la partition de swap en Mo : "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Utiliser l'espace libre sur la partition de Microsoft Windows"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Quelle partition désirez-vous redimensionner ?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr ""
-"Calcul des limites du système de fichiers de Microsoft Windows en cours"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Le programme de redimensionnement des partitions FAT ne peut manipuler "
-"votre\n"
-"partition. L'erreur suivante est survenue : %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Votre partition Microsoft Windows est trop fragmentée. Veuillez exécuter\n"
-"« defrag » avant."
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATTENTION !\n"
-"\n"
-"DrakX va maintenant réduire la taille de votre partition Windows.\n"
-"\n"
-"Soyez prudent : cette opération est dangereuse. Si vous ne l'avez pas déjà\n"
-"fait, vous devriez tout d'abord sauvegarder vos données et exécuter le\n"
-"programme scandisk (et éventuellement defrag) fourni avec Microsoft Windows\n"
-"sur cette partition.\n"
-"\n"
-"Si vous êtes sûr de vous, cliquez sur OK."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Quelle taille désirez-vous allouer à Microsoft Windows ?"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "partition %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Le redimensionnement de la partition FAT a échoué: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Il n'y a aucune partition FAT à redimensionner ou à utiliser en tant que "
-"loopback (ou trop peu d'espace est disponible)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Effacer tout le disque"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Supprimer Microsoft Windows"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Vous possédez plus d'un disque dur.\n"
-"Sur lequel désirez vous installer Linux ?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"TOUTES les partitions et les données présentes sur le disque %s seront "
-"perdues"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Partitionnement personnalisé"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Utiliser Fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Vous pouvez maintenant partitionner %s.\n"
-"\n"
-"Lorsque vous aurez terminé, n'oubliez pas d'enregistrer vos\n"
-"modifications en appuyant sur la touche « w »."
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Utiliser l'espace libre sur la partition de Microsoft Windows"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Pas de place disponible pour l'installation"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"L'assistant de partitionnement de DrakX\n"
-"a trouvé les solutions suivantes :"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Le partitionnement a échoué %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Démarrage de l'interface réseau"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Arrêt de l'interface réseau"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Une erreur est survenue et il est impossible de la gérer de façon fiable.\n"
-"Vous pouvez continuer, mais à vos risques et périls."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Point de montage dupliqué : %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Quelques paquetages importants n'ont pas été correctement installés. Il se\n"
-"peut que le lecteur de CD-ROM ou le CD-ROM lui-même soit défectueux. Vous\n"
-"pouvez vous assurer du bon état de ce dernier en exécutant la commande "
-"suivante\n"
-"sur un ordinateur fonctionnant correctement : « rmp -qpl Mandrake/RPMS/*."
-"rpm »\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bienvenue sur %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Aucun lecteur de disquette disponible"
-
-#
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Démarrage de l'étape « %s »\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Choisissez l'espace que vous voulez utiliser"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Taille totale : "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Version : %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Taille : %d Ko\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Choisissez les paquetages que vous souhaitez installer"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Information"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Installation"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Installation"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Veuillez patienter, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Temps restant "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Temps total "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Préparation de l'installation"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Installation du paquetage %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Souhaitez-vous tout de même continuer ?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Une erreur est survenue lors du tri des paquetages :"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Utiliser la configuration de X existante ?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Votre ordinateur possède peu de mémoire. Vous aurez peut-être quelques\n"
-"problèmes pour installer Mandrake Linux. Si cela se produit, vous pouvez\n"
-"essayer de procéder à une installation en mode texte. Pour cela, appuyez\n"
-"sur la touche « F1 » lors du démarrage du CD-ROM puis entrez « text »."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Classe d'installation"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Veuillez choisir une des classes d'installation ci-dessous :"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"La taille totale pour les groupes sélectionnés est approximativement de %d "
-"Mo.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Si vous voulez installer moins que cette taille,\n"
-"choisissez le pourcentage de paquetages que vous souhaitez installer.\n"
-"\n"
-"Un faible pourcentage ne permet l'installation que des paquetages les plus "
-"importants.\n"
-"Un pourcentage de 100%% permet l'installation de tous les paquetages "
-"sélectionnés."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Vous avez de l'espace sur votre disque pour seulement %d%% de ces "
-"paquetages.\n"
-"\n"
-"Si vous souhaitez en installer moins que ce cela,\n"
-"choisissez le pourcentage de paquetages que vous voulez installer.\n"
-"\n"
-"Un faible pourcentage ne permet l'installation que des paquetages les plus "
-"importants.\n"
-"Un pourcentage de %d%% permet l'installation de tous les paquetages "
-"sélectionnés."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-"Vous pourrez afiner la sélection des paquetages lors de la prochaine étape."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Pourcentage des paquetages à installer"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Sélection des groupes de paquetages"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Sélection individuelle des paquetages"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Taille totale : %d / %d Mo"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Mauvais paquetage"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nom : %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importance : %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Vous ne pouvez pas sélectionner ce paquetage car il ne reste pas assez de "
-"place pour l'installer"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Les paquetages suivants vont être installés"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Les paquetages suivants vont être désinstallés"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Vous ne pouvez pas sélectionner/désélectionner ce paquetage"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ce paquetage est requis, vous ne pouvez pas le désélectionner."
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Vous ne pouvez pas désélectionner ce paquetage. Il est déja installé."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ce paquetage doit être mis à jour.\n"
-"Êtes-vous certain de vouloir le désélectionner ?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-"Vous ne pouvez pas désélectionner ce paquetage, il doit être mis à jour."
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Montrer les paquetages sélectionnés automatiquement"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Charger/Sauvegarder sur disquette"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "Mettre à jour la sélection des paquetages"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "Installation minimale"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Estimation en cours"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Veuillez patienter, préparation de l'installation"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d paquetages"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Important\n"
-"\n"
-"Veuillez lire attentivement le présent document. En cas de désaccord \n"
-"avec le présent document vous n'êtes pas autorisé à installer les \n"
-"medias suivants. Dans ce cas, sélectionnez 'Refuser' pour continuer \n"
-"l'installation sans ces medias.\n"
-"\n"
-"Certains composants logiciels contenus dans les medias suivants ne \n"
-"sont pas soumis aux licences GPL ou similaires permettant la copie, \n"
-"l'adaptation ou la redistribution. Chacun de ces composants logiciels \n"
-"est distribué sous les termes et conditions d'un accord de licence \n"
-"lui étant propre. Veuillez vous y référer et y agréer avant de les \n"
-"installer, utiliser ou redistribuer. Généralement, sauf dans la mesure \n"
-"et pour les besoins autorisés par les lois en vigueur, ces licences \n"
-"n'autorisent pas la copie (autre qu'à titre de sauvegarde), la \n"
-"distribution, la décompilation, le désassemblage, l'ingénierie à \n"
-"rebours, la reconstitution de la logique du logiciel et/ou leur \n"
-"modification. Toute violation de la licence applicable entraîne \n"
-"généralement la résiliation de la licence qui vous est accordée, sans \n"
-"préjudice de tous autres droits ou actions à votre encontre. À moins \n"
-"que l'accord de licence ne vous l'y autorise, vous ne pouvez pas \n"
-"installer ces Logiciels sur plus d'une machine ni adapter les Logiciels \n"
-"pour une utilisation en réseau. Le cas échéant, veuillez contacter le \n"
-"distributeur de chaque programme pour acquérir des licences \n"
-"additionnelles. La distribution à des tiers de copies des Logiciels ou \n"
-"de la documentation qui les accompagne est généralement interdite.\n"
-"\n"
-"Tous les droits, titres et intérêt de cess logiciels sont la propriété \n"
-"exclusive de leurs auteurs respectifs et sont protégés au titre des \n"
-"droits de propriété intellectuelle et autres lois régissant le droit \n"
-"des Logiciels.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Accepter"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Refuser"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Changement de CD-ROM\n"
-"\n"
-"Veuillez insérer le CD-ROM nommé « %s » dans votre lecteur.\n"
-"Ceci fait, cliquez sur « OK ».\n"
-"\n"
-"Si vous ne le possédez pas, cliquez sur « Annuler »."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Une erreur est survenue lors de l'installation du paquetage :"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Une erreur est survenue"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Licence"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"Le système d'exploitation et les divers composants disponibles dans la \n"
-"distribution Mandrake Linux sont ci-après dénommés ensemble les \n"
-"\"Logiciels\". Les Logiciels comprennent notamment, mais de façon non \n"
-"limitative, l'ensemble des programmes, procédés, règles et documentations \n"
-"relatifs au système d'exploitation et aux divers composants de la \n"
-"distribution Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Licence\n"
-"\n"
-"Veuillez lire attentivement le présent document. Ce document constitue \n"
-"un contrat de licence entre vous (personne physique ou personne morale) et \n"
-"MandrakeSoft S.A. portant sur les Logiciels.\n"
-"Le fait d'installer, de reproduire ou d'utiliser les Logiciels de quelque \n"
-"manière que ce soit indique que vous reconnaissez avoir préalablement eu \n"
-"connaissance et que vous acceptez de vous conformer aux termes et "
-"conditions \n"
-"du présent contrat de licence. En cas de désaccord avec le présent "
-"document \n"
-"vous n'êtes pas autorisé à installer, reproduire et utiliser de quelque \n"
-"manière que ce soit ce produit.\n"
-"Le contrat de licence sera résilié automatiquement et sans préavis dans le \n"
-"cas où vous ne vous conformeriez pas aux dispositions du présent document. \n"
-"En cas de résiliation vous devrez immédiatement détruire tout exemplaire "
-"et \n"
-"toute copie de tous programmes et de toutes documentations qui constituent \n"
-"le système d'exploitation et les divers composants disponibles dans la \n"
-"distribution Mandrake Linux.\n"
-"\n"
-"\n"
-"2. Garantie et limitations de garantie\n"
-"\n"
-"Les Logiciels et la documentation qui les accompagne sont fournis en "
-"l'état \n"
-"et sans aucune garantie. MandrakeSoft S.A. décline toute responsabilité \n"
-"découlant d'un dommage direct, spécial, indirect ou accessoire, de quelque \n"
-"nature que ce soit, en relation avec l'utilisation des Logiciels, "
-"notamment \n"
-"et de façon non limitative, tout dommage entraîné par les pertes de \n"
-"bénéfices, interruptions d'activité, pertes d'informations commerciales ou \n"
-"autres pertes pécuniaires, ainsi que des éventuelles condamnations et \n"
-"indemnités devant être versées par suite d'une décision de justice, et ce \n"
-"même si MandrakeSoft S.A. a été informée de la survenue ou de \n"
-"l'éventualité de tels dommages.\n"
-"\n"
-"AVERTISSEMENT QUANT A LA DETENTION OU L'UTILISATION DE LOGICIELS \n"
-"PROHIBES DANS CERTAINS PAYS \n"
-"\n"
-"En aucun cas, ni MandrakeSoft S.A. ni ses fournisseurs ne pourront être \n"
-"tenus responsable à raison d'un préjudice spécial, direct, indirect ou \n"
-"accessoire, de quelque nature que ce soit (notamment et de façon non \n"
-"limitative les pertes de bénéfices, interruptions d'activité, pertes \n"
-"d'informations commerciales ou autres pertes pécuniaires, ainsi que \n"
-"des éventuelles condamnations et indemnités devant être versées par suite \n"
-"d'une décision de justice) qui ferait suite à l'utilisation, la détention \n"
-"ou au simple téléchargement depuis l'un des sites de téléchargement de \n"
-"Mandrake Linux de logiciels prohibés par la législation à laquelle vous \n"
-"êtes soumis. Cet avertissement concerne notamment certains logiciels de \n"
-"cryptographie fournis avec les Logiciels.\n"
-"\n"
-"\n"
-"3. Licence GPL et autres licences\n"
-"\n"
-"Les Logiciels sont constitués de modules logiciels créés par diverses \n"
-"personnes (physiques ou morales). Nombre d'entre eux sont distribués sous \n"
-"les termes de la GNU General Public Licence (ci-après dénommée \"GPL\") ou \n"
-"d'autres licences similaires. La plupart de ces licences vous permettent \n"
-"de copier, d'adapter ou de redistribuer les modules logiciels qu'elles \n"
-"régissent. Veuillez lire et agréer les termes et conditions des licences \n"
-"accompagnant chacun d'entre eux avant de les utiliser. Toute question \n"
-"concernant la licence de chaque Logiciel est à soumettre à l'auteur (ou \n"
-"ses représentants) du Logiciel et non à MandrakeSoft. \n"
-"Les programmes conçus par MandrakeSoft sont régis par la licence GPL. \n"
-"La documentation rédigée par MandrakeSoft fait l'objet d'une licence \n"
-"spécifique. Veuillez vous référez à la documentation pour obtenir plus \n"
-"de précisions.\n"
-"\n"
-"\n"
-"4. Propriété intellectuelle\n"
-"\n"
-"Tous les droits, titres et intérêts des différents Logiciels sont la \n"
-"propriété exclusive de leurs auteurs respectifs et sont protégés au titre \n"
-"des droits de propriété intellectuelle et autres lois régissant le droit \n"
-"des Logiciels. Les marques \"Mandrake\" et \"Mandrake Linux\" ainsi que "
-"les \n"
-"logotypes associés sont déposés par MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Dispositions diverses\n"
-"\n"
-"Si une disposition de ce contrat de licence devait être déclarée nulle, \n"
-"illégale ou inapplicable par un tribunal compétent, cette disposition sera \n"
-"exclue du présent contrat. Vous continuerez à être liés aux autres \n"
-"dispositions, qui recevront leurs pleins effets. Le contrat de licence \n"
-"est soumis à la Loi française. Toute contestation relative aux présentes \n"
-"sera réglée préalablement par voie amiable. A défaut d'accord avec \n"
-"MandrakeSoft S.A., les tribunaux compétents de Paris seront saisis du \n"
-"litige. Pour toute question relative au présent document, veuillez \n"
-"contacter MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Clavier"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Veuillez choisir la disposition de votre clavier."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Voici la liste complète des claviers disponibles"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Quelle classe d'installation désirez-vous utiliser ?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Installation/Mise à jour"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Désirez-vous faire une installation ou mise à jour ?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Recommandée"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Mise à jour"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Veuillez choisir le type de votre souris."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Port souris"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Veuillez choisir le port série sur lequel votre souris est connectée."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Émulation des boutons"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Émulation du bouton 2"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Émulation du bouton 3"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Configuration des cartes PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Configuration IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "Aucune partition disponible"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Examen des partitions afin d'identifier les points de montage"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Choix des points de montage"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"La table des partitions ne peut être lue car elle est trop endommagée.\n"
-"Il est possible de réinitialiser les partitions endommagées (TOUTES LES\n"
-"DONNÉES seront perdues). Une autre solution consiste a ne pas autoriser "
-"DrakX à modifier la table\n"
-"des partitions (l'erreur est %s)\n"
-"\n"
-"Étes-vous d'accord pour perdre toutes les partitions ?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ne peut lire la table des partitions de façon satisfaisante.\n"
-"Vous pouvez continuer, mais à vos risques et périls."
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Pas de place libre pour le bootstrap de 1 Mo. L'installation va continuer, "
-"mais pour démarrer votre système, vous aurez besoin de créer la partition "
-"bootstrap avec DiskDrake."
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "Pas de partition racine trouvée pour procéder à une mise à jour."
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Partition racine"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Quelle est la partition racine (/) de votre système ?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Vous devez redémarrer pour que les modifications apportées à la\n"
-"table des partitions soient prises en compte"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Sélectionnez les partitions que vous souhaitez formater"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Vérifier la présence de blocs endommagés ?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Formatage des partitions"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Création et formatage du fichier %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Le swap est insuffisant pour achever l'installation, veuillez en ajouter"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Recherche des paquetages disponibles en cours"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Recherche des paquetages à mettre à jour"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Votre système ne dispose pas d'assez d'espace libre pour l'installation ou "
-"la mise à jour (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Complète (%d Mo)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%d Mo)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recommandée (%d Mo)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Personnalisée"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Veuillez préciser si vous voulez charger ou sauver la sélection de "
-"paquetages sur la disquette.\n"
-"Le format est le même que celui des disquettes générées pour l'installation "
-"automatisée."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Charger à partir d'une disquette"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Chargement depuis la disquette"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Sélection des paquetages"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "Insérez une disquette contenant la sélection des paquetages"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Sauvegarder sur disquette"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "La taille sélectionnée est plus importante que la place disponible"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Si vous possédez tous les CD mentionnés dans la liste ci-dessous, cliquez "
-"sur « OK ». Si vous n'en possédez aucun, cliquez sur « Annuler ». S'il ne "
-"vous en manque que quelques un, déselectionnez les, puis cliquez sur « OK »."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM « %s »"
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installation du paquetage %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Configuration post-installation"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Insérez la disquette de démarrage utilisée dans le lecteur %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Insérez la disquette de mise à jour de modules dans le lecteur %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Vous avez maintenant la possibilité de télécharger des paquetages contenant "
-"des logiciels faisant usage de cryptographie si votre connexion à Internet "
-"est correctement configurée.\n"
-"\n"
-"\n"
-"ATTENTION : EN RAISON DE LA DIVERSITÉ DES RÉGLEMENTATIONS CONCERNANT CES "
-"LOGICIELS, VOUS DEVEZ VOUS ASSURER QUE LES LOIS ET RÉGLEMENTS AUXQUELS VOUS "
-"ÊTES SOUMIS VOUS AUTORISENT À LES TÉLÉCHARGER, LES STOCKER ET/OU LES "
-"UTILISER.\n"
-"\n"
-"\n"
-"NOUS ATTIRONS TOUT PARTICULIÈREMENT VOTRE ATTENTION SUR LE RESPECT DE LA "
-"RÉGLEMENTATION EN VIGUEUR DANS VOTRE PAYS. VOUS VOUS EXPOSEZ À DE GRAVES "
-"SANCTIONS EN CAS DE VIOLATION DESDITES RÈGLES.\n"
-"\n"
-"\n"
-"EN AUCUN CAS, NI MANDRAKESOFT NI SES FOURNISSEURS NE POURRONT ÊTRE TENUS "
-"RESPONSABLES À RAISON D'UN PRÉJUDICE SPÉCIAL, INDIRECT OU ACCESSOIRE, DE "
-"QUELQUE NATURE QUE CE SOIT (NOTAMMENT LES PERTES DE BÉNÉFICES, INTERRUPTIONS "
-"D'ACTIVITÉ, PERTES D'INFORMATIONS COMMERCIALES OU AUTRES PERTES PÉCUNIAIRES, "
-"AINSI QUE DES ÉVENTUELLES CONDAMNATIONS ET INDEMNITÉS DEVANT ÊTRE VERSÉES "
-"PAR SUITE D'UNE DÉCISION DE JUSTICE) QUI FERAIT SUITE À L'UTILISATION, LA "
-"DÉTENTION OU AU SIMPLE TÉLÉCHARGEMENT DES LOGICIELS CRYPTOGRAPHIQUES "
-"AUXQUELS VOUS POURREZ ÉVENTUELLEMENT ACCÉDER APRÈS AVOIR VALIDÉ LE PRÉSENT "
-"ACCORD.\n"
-"\n"
-"\n"
-"Si vous résidez en France, le présent accord est soumis à loi française. Si "
-"vous résidez hors de France, le droit local pourra, le cas échéant, "
-"s'appliquer.\n"
-"\n"
-"\n"
-"Au cas vous auriez des questions concernant cet accord, veuillez vous mettre "
-"en rapport avec :\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Choisissez un miroir où télécharger les paquetages"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Téléchargement de la liste des paquetages disponibles en cours"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Veuillez choisir les paquetages que vous souhaitez installer"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Quelle est votre zone horaire ?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "Horloge système réglée sur GMT"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Synchronisation automatique de l'horloge (via NTP)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "Serveur NTP"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Serveur CUPS distant"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Pas d'imprimante"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Résumé"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Souris"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Zone horaire"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Imprimante"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "Carte ISDN/RNIS"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Carte son"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "Carte TV"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Fichiers locaux"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Mot de passe root"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Pas de mot de passe"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Ce mot de passe est trop court (il doit comprendre au moins %d caractères)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Authentification"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "Authentification LDAP"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "Racine (dn) LDAP"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "Serveur LDAP"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "Authentification NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "Domaine NIS"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "Serveur NIS"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Une disquette de démarrage fournit un moyen de démarrer votre système Linux\n"
-"indépendamment du chargeur de démarrage habituel.\n"
-"\n"
-"C'est utile si vous ne voulez pas installer SILO sur votre système,\n"
-"si un autre système d'exploitation supprime le chargeur de démarrage, ou "
-"encore\n"
-"si ce dernier ne peut être installé sur votre machine.\n"
-"\n"
-"Vous pouvez également utiliser cette disquette avec l'image de secours "
-"Mandrake\n"
-"Cela permet une récupération plus aisée du système en cas de problèmes "
-"majeurs.\n"
-"\n"
-"Si vous voulez créer une disquette de démarrage pour votre système, insérer "
-"une disquette dans le premier lecteur et appuyer sur \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Premier lecteur de disquettes"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Second lecteur de disquettes"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Abandonner"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Une disquette de démarrage fournit un moyen de démarrer votre système Linux\n"
-"indépendamment du chargeur de démarrage habituel.\n"
-"\n"
-"C'est utile si vous ne voulez pas installer LILO (ou Grub) sur votre "
-"système,\n"
-"si un autre système d'exploitation supprime le chargeur de démarrage, ou "
-"encore\n"
-"si ce dernier ne peut être installé sur votre machine.\n"
-"\n"
-"Vous pouvez également utiliser cette disquette avec l'image de secours "
-"Mandrake\n"
-"Cela permet une récupération plus aisée du système en cas de problèmes "
-"majeurs.\n"
-"\n"
-"Désirez-vous créer une disquette de démarrage pour votre système ?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Désolé, aucun lecteur de disquettes ne semble disponible"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Choisissez le lecteur de disquettes que vous voulez utiliser pour\n"
-"créer votre disquette de démarrage."
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Insérez une disquette dans le lecteur %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Création de la disquette de démarrage en cours"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Préparation du chargeur de démarrage"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Il semble que vous ayez une machine de l'ancien monde, ou inconnue,\n"
-"le chargeur de démarrage yaboot ne fonctionnera pas pour vous.\n"
-"L'installation va continuer, mais vous aurez besoin de BootX pour démarrer\n"
-"votre machine."
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Désirez-vous utiliser aboot ?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Une erreur est survenue lors de l'installation de aboot.\n"
-"Désirez-vous forcer l'installation au risque de détruire la\n"
-"première partition du disque ?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-msgid "Installing bootloader"
-msgstr "Installation du chargeur de démarrage"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"L'installation du chargeur de démarrage a échoué pour la raison suivante :"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Vous aurez peut-être besoin de changer le périphérique de démarrage\n"
-"de l'Open Firmware pour activer le chargeur de démarrage. Si vous\n"
-"ne voyez pas apparaître l'invite du chargeur de démarrage lorsque\n"
-"vous redémarrerez, appuyez sur Command-Option-O-F au démarrage et\n"
-"entrez :\n"
-"setenv boot-device %s,\\\\:tbxi\n"
-"Puis tappez : shut-down\n"
-"Au prochain démarrage vous devriez voir apparaître l'invite du\n"
-"chargeur de démarrage."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Faible"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Moyenne"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Élevée"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Choisissez le niveau de sécurité"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Insérez une disquette formatée dans le lecteur %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Création de la disquette d'auto-installation"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Certaines étapes ne sont pas terminées.\n"
-"\n"
-"Voulez-vous vraiment quitter maintenant ?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Félicitations, l'installation est terminée.\n"
-"Enlevez le medium de boot et appuyez sur « Entrée » pour redémarrer.\n"
-"\n"
-"Pour toutes informations sur les corrections disponibles pour cette version "
-"de Mandrake Linux, consulter les Errata disponibles depuis http://www.linux-"
-"mandrake.com/.\n"
-"\n"
-"Des informations sur la configuration de votre système sont \n"
-"disponibles dans le Guide de l'Utilisateur de Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Créer une disquette d'auto-installation"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"L'auto-installation peut être complètement automatique si nécessaire,\n"
-"dans ce cas-là elle prend le contrôle du disque dur !!\n"
-"(prévu pour l'installation d'une autre machine).\n"
-"\n"
-"Vous pouvez préferer rejouer l'installation.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automatique"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Rejouer"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Sauvegarder la sélection des paquetages"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Installation de Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> Élément suivant | <Espace> Sélectionner | <F12> Écran "
-"suivant "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu est introuvable"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "Choisissez un fichier"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Avancé"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Veuillez patienter"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Développer l'arborescence"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Réduire l'arborescence"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Basculer d'un affichage alphabétique à un tri par groupes"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Ambiguïté (%s), soyez plus précis\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Choix erroné. Veuillez recommencer\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (%s par défaut) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Que choisissez-vous ? (%s par défaut) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Que choisissez-vous ? (%s par défaut, entrez « none » si rien) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Tchèque (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Allemand"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Espagnol"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Finlandais"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Français"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norvégien"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Polonais"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Russe"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Suédois"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Anglais"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "Américain (États-Unis)"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Albanais"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Arménien (ancien)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Arménien (machine à écrire)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Arménien (phonétique)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjan (latin)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belge"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulgare"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brésilien"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Bielorusse"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Suisse (allemand)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Suisse (français)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Tchèque (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Allemand (sans touches mortes)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Danois"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norvégien)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estonien"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Géorgien (disposition « russe »)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Géorgien (disposition « latine »)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Grec"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Hongrois"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Croate"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Israélien"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Israélien (phonétique)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iranien"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islandais"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Italien"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Clavier japonais 106 touches"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Clavier coréen"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Amérique latine"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lithuanien (AZERTY, ancien modèle)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lithuanien (AZERTY, nouveau modèle)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lithuanien « Ligne de nombres » QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lithuanien « phonétique » QWERTY"
-
-#: ../../keyboard.pm_.c:208
-msgid "Latvian"
-msgstr "Letton"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Macédonien"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Hollandais"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Polonais (QWERTY)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Polonais (QWERTZ)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugais"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Canadien (Québec)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Roumain (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Roumain (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Russe (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Slovénien"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaque (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaque (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "Serbe (cyrillique)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Clavier Thaï"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr "Clavier Tajik"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turque (modèle traditionnel « F »)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turque (modèle moderne « Q »)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukrainien"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "Américain (international)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamien « colone numérique » QWERTY"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "Yougoslave (latin)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Points de montage circulaires %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Enlever les volumes logiques tout d'abord\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Souris SUN"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Souris standard PS2 à molette"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 bouton"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Générique"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Roulette"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "série"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Souris standard à 2 boutons"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Souris standard à 3 boutons"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Souris Logitech (série, ancien modèle C7)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "souris bus"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 boutons"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 boutons"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "aucun"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Pas de souris"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Veuillez tester votre souris"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Pour activer la souris,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "veuillez faire tourner la molette"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Terminer"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Suivant ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Précédent"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Êtes-vous satisfait ?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Connexion à Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"La façon la plus courante de se connecter à Internet en utilisant\n"
-"ADSL est d'utiliser pppoe.\n"
-"\n"
-"Certaines connexions utilisent pptp, et d'autres, uniquement DHCP.\n"
-"\n"
-"Si vous ne savez pas quoi choisir, utilisez pppoe."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "utiliser dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "utiliser pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "utiliser pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Quel client DHCP désirez-vous utiliser ?\n"
-"\n"
-"Le client par défaut est dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Aucune carte réseau n'a été détectée sur votre système.\n"
-"La connexion ne peut être configurée."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Choisissez la carte réseau"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Veuillez choisir la carte réseau que vous désirez utiliser pour vous "
-"connecter à Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "Aucune carte réseau n'a été identifiée"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Configuration du réseau"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Veuillez indiquer le nom de votre machine si vous le connaissez.\n"
-"Certains serveurs DHCP ont besoin d'un nom de machine pour fonctionner.\n"
-"Votre nom d'hôte doit être pleinenement qualifié, de façon similaire\n"
-"à « mamachine.monlabo.masociete.com »."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Nom de machine :"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Assistant de configuration réseau"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem ISDN/RNIS externe"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Carte ISDN/RNIS interne"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Quel est le type de votre connexion ISDN/RNIS ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Quelle configuration RNIS préférez-vous?\n"
-"\n"
-"* L'ancienne configuration utilise isdn4net. Il contient\n"
-"des outils puissants, mais est difficile à configurer, et\n"
-"non standard.\n"
-"\n"
-"* La nouvelle configuration est plus facile à comprendre,\n"
-"plus standard, mais avec moins d'outils.\n"
-"\n"
-"Nous recommandons la configuration « light »\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nouvelle configuration (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Ancienne configuration (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "Configuration RNIS/ISDN"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Veuillez choisir votre fournisseur d'accès.\n"
-"S'il ne figure pas dans la liste, choisissez « Non listé »."
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "Protocole pour l'Europe"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "Protocole pour l'Europe (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "Protocole pour le reste du monde"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protocole pour le reste du monde \n"
-" Pas de D-Channel (lignes louées)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Quel protocole désirez-vous utiliser ?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Quel type de carte possédez-vous ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Je ne sais pas"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Si vous possédez une carte ISA, les données du prochain écran devraient\n"
-"être correctes.\n"
-"\n"
-"Si vous possédez une carte PCMCIA, vous devez connaître l'IRQ de votre "
-"carte.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Arrêter"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Continuer"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Quel est le modèle de votre carte RNIS/ISDN ?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Une carte RNIS/ISDN a été détectée mais son type est inconnu. Veuillez "
-"sélectionner une carte PCI dans le prochain écran."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Aucune carte RNIS/ISDN identifiée. Veuillez en sélectionner une dans le\n"
-"prochain écran."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Veuillez choisir le port série sur lequel votre modem est connecté."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Options d'appel"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Nom de la connexion"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Numéro de téléphone"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Identifiant de connexion"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Basée sur un script"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Basée sur un terminal"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Nom de domaine"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Premier serveur de noms (DNS) (optionnel)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Deuxième serveur de noms (DNS) (optionnel)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Vous pouvez vous déconnecter ou reconfigurer votre connexion."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Vous pouvez reconfigurer votre connexion."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Vous êtes actuellement connecté à Internet."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Vous pouvez vous connecter à Internet ou reconfigurer votre connexion."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Vous n'êtes pas actuellement connecté à Internet."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Connexion à Internet"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Déconnexion d'Internet"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Configurer la connexion réseau (Réseau local ou Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Connexion à Internet et configuration"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Nous allons configurer la connexion %s."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Nous allons maintenant configurer la connexion %s.\n"
-"\n"
-"\n"
-"Appuyez sur OK pour continuer."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Configuration du réseau"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Parce que vous faites une installation réseau, votre réseau est déjà "
-"configuré.\n"
-"Cliquez sur Ok pour conserver la configuration, ou Annuler pour reconfigurer "
-"votre connexion Internet et réseau.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Bienvenue dans l'assistant de configuration réseau.\n"
-"\n"
-"Nous sommes sur le point de configurer votre connexion Internet et réseau.\n"
-"Si vous ne souhaitez pas utiliser la détection automatique, déselectionnez "
-"la case correspondante.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Choisissez le profil à configurer"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Utiliser la détection automatique"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Détection des périphériques en cours"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Connexion traditionnelle par modem"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "détecté sur le port %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "Connexion par ISDN"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "détecté %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "Connexion ADSL"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "détecté sur l'interface %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Connexion par cable"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "Connexion par cable détectée"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "Connection par LAN (réseau local)"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "carte(s) ethernet détectée(s)"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Choisissez la connexion que vous voulez configurer"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Vous avez configuré plusieurs moyens d'accès à Internet.\n"
-"Choisissez celui que vous voulez utiliser.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Connexion Internet"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Désirez-vous activer la connexion lors du démarrage ?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Configuration du réseau"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Un problème est survenu pendant le redémarrage du réseau : \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Félicitations, votre configuration Internet et réseau est terminée.\n"
-"\n"
-"La configuration va maintenant être appliquée sur votre système.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Après, nous vous recommandons de redémarrer votre environnement X,\n"
-"afin d'éviter les problèmes liés au changement de nom de machine."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"Attention ! Ce périphérique a été précédemment configuré pour la connexion à "
-"Internet.\n"
-"\n"
-"Cliquez sur « OK » pour conserver la configuration de ce périphérique.\n"
-"La configuration actuelle sera supprimée si vous modifiez les champs\n"
-"ci-dessous disponibles."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Veuillez indiquer la configuration IP de cette machine.\n"
-"Chaque champ doit être complété avec une adresse IP en notation\n"
-"décimale pointée (par exemple, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Configuration du périphérique réseau %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (pilote %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "Adresse IP"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Masque de sous-réseau"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(BOOTP/DHCP)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Attribution automatique de l'adresse IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "L'adresse IP doit être au format 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Veuillez indiquer le nom de la machine.\n"
-"Celui-ci doit être un nom de machine pleinement qualifié, par exemple "
-"« mamachine.monlabo.masociete.com ».\n"
-"Vous pouvez également indiquer l'adresse IP de la passerelle si vous en avez "
-"une."
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "Serveur DNS"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Passerelle"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Périphérique d'accès à la passerelle"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Configuration des serveurs mandataires"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "Serveur mandataire HTTP (proxy)"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "Serveur mandataire FTP (proxy)"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr "Identifiant de la carte réseau (utile pour les portables)"
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "La syntaxe doit être http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "La syntaxe doit être ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Configuration de l'accès à Internet"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Désirez-vous vous connecter à Internet maintenant ?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Je teste votre connexion..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Le système est à présent connecté à Internet."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Pour des raisons de Sécurité, il va être déconnecté maintenant."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Le système ne paraît pas connecté à Internet.\n"
-"Essayez de reconfigurer votre connection."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Configuration de la connexion"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Veuillez compléter ou vérifier les champs ci-dessous"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ de la carte"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Plage mémoire (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "E/S de la carte"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "E/S_O de la carte"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "E/S_1 de la carte"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Votre numéro de téléphone personnel"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Fournisseur d'accès (ex. provider.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Numéro de téléphone du fournisseur d'accès"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 du provider (optionnel)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 du provider (optionnel)"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "Choisissez votre pays"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Numérotation"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Vitesse de connexion"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "Délai pour la déconnexion (en sec.)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Identifiant du compte (nom d'utilisateur)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Mot de passe du compte"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Les partitions étendues ne sont pas supportée par cette plateforme"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Il existe un espace vide dans la table des partitions mais il est\n"
-"inutilisable. La seule solution disponible est de déplacer vos partitions\n"
-"de telle façon que cet espace se situe au-delà des partitions étendues."
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Échec lors de la restauration depuis le fichier %s : %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Mauvais fichier de sauvegarde"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Erreur lors de l'écriture dans le fichier %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Quelque chose de mauvais se passe sur votre disque dur. \n"
-"Le test pour vérifier l'intégrité des données a échoué. \n"
-"Cela veut dire qu'écrire sur le disque finira par des pertes de données\n"
-"au hasard"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "devrait avoir"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "important"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "très utile"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "utile"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "éventuellement"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Nouvelle Génération"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LpRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "Lpd"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Imprimante locale"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Imprimante distante"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "Imprimante sur serveur CUPS distant"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "Imprimante sur serveur lpd distant"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Imprimante réseau (socket)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Imprimante sur serveur SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "Imprimante sur serveur NetWare"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "Indiquez un URI pour le périphérique d'impression"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "Reconduire le travail sur une commande"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "Modèle inconnu"
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr "Imprimante brute (pas de pilote)"
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(sur %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "(sur cette machine)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Type de connexion de l'imprimante"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Quel est le type de connexion de l'imprimante ?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"Si vous utilisez un serveur CUPS distant, vous n'avez pas besoin\n"
-"de configurer d'imprimante ici. Elles seront automatiquement détectées.\n"
-"Si vous hésitez, sélectionnez « Imprimante sur serveur CUPS distant »."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Aucun"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Choisissez l'utilisateur par défaut:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-"Avec les serveurs CUPS distants, vous n'avez pas besoin de configurer\n"
-"d'imprimante ici ; les serveurs CUPS informeront votre machine\n"
-"automatiquement à propos de leurs imprimantes. Pour l'instant, toutes\n"
-"les imprimantes connues sur votre ordinateur sont listées dans le\n"
-"champ « Imprimante par défaut ». Choisissez l'imprimante par défaut\n"
-"pour votre machine, puis cliquez sur le bouton\n"
-"« Appliquer/Rafraichir la liste des imprimantes ». Cliquez sur le\n"
-" même bouton pour remettre la liste à jour (il peut se passer jusqu'à\n"
-"30 secondes entre le moment de l'appel de CUPS et celui où toutes les\n"
-"imprimantes sont visibles). Si votre serveur CUPS est sur un réseau\n"
-"différent, vous devrez donner son adresse IP, et éventuellement le\n"
-"numéro de port afin d'obtenir les informations sur les imprimantes,\n"
-"sinon, laissez ces champs vides."
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalement, CUPS est configuré automatiquement en fonction de\n"
-"votre environnement réseau, de sorte que vous puissiez accèder\n"
-"aux imprimantes des serveurs CUPS depuis votre réseau local.\n"
-"Si cela ne fonctionne pas correctement, désactivez « configuration\n"
-"automatique du serveur CUPS » et éditez le fichier\n"
-"« /etc/cups/cupsd.conf » manuellement. N'oubliez pas de relancer\n"
-" CUPS après cela (à l'aide de la commande :\n"
-"« service cups restart »)."
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Fermer"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "Appliquer/Rafraichir la liste des imprimantes"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "L'adresse IP doit ressembler à 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "Le numéro de port doit être un entier !"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "Imprimante par défaut"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "Adresse IP du serveur CUPS"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr "Configuration automatique du serveur CUPS"
-
-#: ../../printerdrake.pm_.c:217
-msgid "Detecting devices ..."
-msgstr "Détection des périphériques..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Test des ports"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Une imprimante de modèle « %s » a été détectée sur "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Périphérique de l'imprimante locale"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Sur quel périphérique votre imprimante est-elle connectée \n"
-"(veuillez noter que « /dev/lp0 » est équivalent à LPT1) ?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Port imprimante : "
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "Nom de périphérique/fichier manquant!"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-msgid "Reading printer database ..."
-msgstr "Lecture de la base de données des imprimantes..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Configuration d'une imprimante Unix (lpd) distante"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Afin de pouvoir utiliser une imprimante Unix distante, vous\n"
-"devez indiquer les noms du serveur et de l'imprimante\n"
-"sur ce serveur."
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "Nom de machine distante"
-
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "Nom de l'imprimante distante"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "Nom du serveur distant manquant !"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "Le nom de l'imprimante distante est manquant !"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Configuration d'une imprimante SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Ain de pouvoir accéder à une imprimante connectée à un serveur SMB, vous\n"
-"devez indiquer le nom SMB du serveur (attention, ce dernier peut être\n"
-"différent de son nom TCP/IP) et, éventuellement, son adresse IP ainsi\n"
-"que le nom de l'imprimante et toute information applicable quant au nom\n"
-"d'utilisateur, mot de passe et groupe de travail nécessaires pour\n"
-"accéder à l'imprimante."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "Nom du serveur SMB"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "Adresse IP du serveur SMB"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Nom de partage"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Groupe de travail"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Le nom du serveur ou son adresse IP doivent être donnés !"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "Nom de partage Samba manquant !"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "Options de l'imprimante NetWare"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Pour accéder à une imprimante connectée à un serveur NetWare, vous aurez\n"
-"besoin d'indiquer le nom NetWare du serveur (attention, ce dernier peut\n"
-"être un nom différent de son nom TCP/IP), le nom de la file d'impression,\n"
-"ainsi que les nom d'utilisateur et mot de passe nécessaires pour accéder à\n"
-"cette file d'impression."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Serveur d'impression"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Nom de la file d'impression"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "Nom du serveur NCP manquant!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "Nom de la file d'attente NCP manquant!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Options de l'imprimante socket"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Pour imprimer sur une imprimante socket, vous devez indiquer le\n"
-"nom d'hôte de l'imprimante et, optionellement, le numéro du port.\n"
-"Pour les serveurs d'impression « HP JetDirect », le numéro du\n"
-"port est habituellement 9100, mais cela peut être différent pour\n"
-"d'autres serveurs. Veuillez consulter le manuel de votre imprimante."
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "Nom d'hôte de l'imprimante"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "Nom d'hôte de l'imprimante manquant !"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "URI du périphérique d'impression"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Vous pouvez spécifier directement l'URI pour accéder à l'imprimante. L'URI "
-"doit respecter les spécifications CUPS ou Foomatic. Notez que tous les types "
-"d'URI ne sont pas supportés par tous les gestionnaires d'impression."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "Une adresse URI valide doit être entrée !"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Chaque imprimante a besoin d'un nom (par exemple lpr).\n"
-"Les champs « Description » et « Emplacement » n'ont pas besoin\n"
-"d'être remplis. Ce sont des commentaires pour les utilisateurs."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Nom de l'imprimante"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Description"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Localisation"
-
-#: ../../printerdrake.pm_.c:701
-msgid "Preparing printer database ..."
-msgstr "Préparation de la base de données des imprimantes..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "Sélection du modèle de l'imprimante"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "Quel modèle d'imprimante possédez-vous ?"
-
-#: ../../printerdrake.pm_.c:866
-msgid "OKI winprinter configuration"
-msgstr "Configuration de l'imprimante Windows OKI"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-"Vous êtes en train de configurer une imprimante laser Windows\n"
-"OKI. Ces imprimantes utilisent un protocole de communication\n"
-"très spécial, et elles ne fonctionnent que si elles sont\n"
-"connectées au premier port parallèle. Si votre imprimante est\n"
-"connectée à un autre port ou à un serveur d'impression,\n"
-"veuillez la connecter au premier port parallèle avant l'impression\n"
-"de la page de test. Sans cela, l'imprimante ne fonctionnera pas\n"
-"Vos paramètres de connexion seront ignorés par le pilote."
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-msgid "Lexmark inkjet configuration"
-msgstr "Configuration de l'imprimante Lexmark inkjet"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-"Les pilotes d'impression inkjet fournis par Lexmark ne\n"
-"permettent que l'utilisation des imprimantes locales, et pas\n"
-"des imprimantes distantes ou des serveurs d'impression.\n"
-"Veuillez connecter votre imprimante sur un port local ou\n"
-"configurez-la sur la machine à laquelle elle est connectée."
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-"Afin de pouvoir imprimer avec votre imprimante Lexmark\n"
-"inkjet et la configuration actuelle, vous avez besoin des\n"
-"pilotes d'impression inkjet fournis par Lexmark\n"
-"(http://www.lexmark.com/). Allez sur le site américain et\n"
-"cliquez sur le bouton « Drivers ». Puis choisissez\n"
-"votre modèle et enfin « Linux » comme système\n"
-"d'exploitation. Les pilotes sont des paquetages RPM ou\n"
-"des scripts shell avec une installation graphique\n"
-"interactive. Vous n'avez pas besoin de faire cette\n"
-"configuration par les frontaux graphiques. Annulez\n"
-"directement après l'acceptation de la license. Ensuite,\n"
-"imprimez les pages d'alignement des têtes d'impression\n"
-"avec « lexmarkmaintain » et ajustez les paramètres de\n"
-"ces têtes à l'aide de ce programme."
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"Paramétrage de l'imprimante par défaut\n"
-"Assurez-vous que la taille de la page et le type\n"
-"d'encre (si disponible) sont correctement indiqués.\n"
-"Notez qu'une très grande qualité d'impression peut\n"
-"impliquer une impression très lente."
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "L'option %s doit être un nombre entier !"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "L'option %s être un nombre !"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "L'option %s est en dehors des limites !"
-
-#: ../../printerdrake.pm_.c:1136
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Désirez-vous que l'imprimante « %s » soit l'imprimante\n"
-"par défaut ?"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "Pages de test"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"Merci de sélectionner les pages de test que vous voulez imprimer.\n"
-"Note : la page de test photo peut prendre un temps assez long pour\n"
-"s'imprimer, et sur les imprimantes laser avec trop peu de mémoire, elle\n"
-"peut même ne pas sortir.\n"
-"Dans la plupart des cas, l'impression de la page de test standard suffit."
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "Pas de page de test"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "Imprimer"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "Page de test standard"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr "Page de test alternative (Letter)"
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr "Page de test alternative (A4)"
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "Page de test photo"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Impression des pages de test en cours"
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Les pages de test ont été envoyées à l'imprimante.\n"
-"Il peut y avoir un délai avant que l'imprimante commence l'impression.\n"
-"Statut de l'impression :\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Les pages de test ont été envoyées à l'imprimante.\n"
-"Il peut y avoir un délai avant que l'imprimante commence l'impression.\n"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "Êtes-vous satisfait du résultat ?"
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-msgid "Raw printer"
-msgstr "Imprimante brute"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Pour imprimer un fichier depuis la ligne de commande (une fenêtre de "
-"terminal), vous pouvez soit utiliser la commande « %s <fichier> » ou un "
-"utilitaire d'impression graphique: « xpp <fichier> » ou « qtcups "
-"<fichier> ». Les utilitaires graphiques vous permettent de choisir "
-"l'imprimante et de modifier les paramètres d'impression facilement.\n"
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Vous pouvez également utiliser ces commands dans le champ « commande "
-"d'impression » des boîtes de dialogue d'impression dans de nombreuses "
-"applications, simplement n'indiquez pas le nom du fichier puisqu'il sera "
-"fourni par l'application elle-même.\n"
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"La commande « %s » permet également de modifier les paramètres d'impression "
-"pour une impression particulière. Il suffit pour cela d'ajouter les "
-"paramètres voulus sur la ligne de commande. Par exemple, « %s <fichier> ». "
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-"Pour obtenir la liste des paramètres disponibles pour l'imprimante courante, "
-"lisez la liste ci-dessous ou cliquez sur le bouton « liste des options "
-"d'impression ».\n"
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Pour imprimer un fichier depuis la ligne de commande (une fenêtre de "
-"terminal), utilisez la commande « %s <fichier>».\n"
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Cette commande peut également être utilisée dans le champ « commande "
-"d'impression » des boîtes de dialogue d'impression dans de nombreuses "
-"applications, simplement n'indiquez pas le nom du fichier à imprimer puisque "
-"celui-ci sera fourni par l'application elle-même.\n"
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-"Pour obtenir la liste des paramètres disponibles pour l'imprimante courante, "
-"cliquez sur le bouton « liste des options d'impression ».\n"
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Pour imprimer un fichier depuis la ligne de commande (une fenêtre de "
-"terminal), utilisez la commande « %s <fichier> » ou « %s <fichier> ».\n"
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Vous pouvez également utiliser l'interface graphique « xpdq » pour "
-"positionner des options d'impression et administrer les travaux "
-"d'impression.\n"
-"Si vous utiliser le bureau KDE, vous disposez d'un « bouton panique », un "
-"icone sur le bureau, nommé « STOP Imprimante ! », qui suspend tous les "
-"travaux d'impression dès que vous le cliquez. Ceci peut être utile en cas de "
-"bourrage papier, par exemple.\n"
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Les commandes « %s » et « %s » permettent également de modifier les "
-"paramètres d'impression pour une impression particulière. Il suffit pour "
-"cela d'ajouter les paramètres voulus sur la ligne de commande, par exemple "
-"« %s <fichier> ».\n"
-
-#: ../../printerdrake.pm_.c:1292
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Impression sur l'imprimante « %s »"
-
-#: ../../printerdrake.pm_.c:1294
-msgid "Print option list"
-msgstr "List des options de l'imprimante"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "Lecture des données de l'imprimante..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "Transfert de la configuration de l'imprimante"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-"Vous pouvez copier la configuration de l'imprimante faite\n"
-"pour le gestionnaire %s vers votre gestionnaire actuel %s.\n"
-"Toutes les données de configuration (nom de l'imprimante,\n"
-"description, emplacement, type de connexion, et paramètres\n"
-"par défaut) sont récupérées, mais les travaux ne seront pas\n"
-"transférés.\n"
-"Toutes les files d'attente n'ont pas pu être transférées à\n"
-"cause des raisons suivantes :\n"
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-"CUPS ne supporte pas les imprimantes sur les serveurs Novell ou\n"
-"les imprimantes qui envoient les données dans une commande\n"
-"« à forme libre ».\n"
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-"PDQ ne supporte que les imprimantes locales, les imprimantes\n"
-"LPD distantes, et les imprimantes Socket/TCP.\n"
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD et LPRng ne supportent pas les imprimantes IPP.\n"
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-"De plus, les files d'attente qui n'ont pas été créées\n"
-"avec ce programme ou «foomatic-configure» ne peuvent\n"
-"pas être transférées."
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-"\n"
-"Aussi, les imprimantes configurées avec les fichiers PPD\n"
-"fournis par leur fabriquant ou avec des pilotes CUPS\n"
-"natifs ne peuvent pas être transférées."
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Cochez les imprimantes que vous voulez transférer, et\n"
-"cliquez sur « Transfert »."
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "Ne pas transférer les imprimantes"
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "Transfert"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Une imprimante nommée « %s » existe déjà sous %s.\n"
-"Cliquez sur « Transfert » pour la remplacer.\n"
-"Vous pouvez également taper un nouveau nom ou\n"
-"simplement ignorer cette imprimante."
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Le nom de l'imprimante ne devrait contenir que des lettres, des nombres et "
-"des tirets bas (_)"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"L'imprimante « %s » existe déjà,\n"
-"voulez-vous vraiment remplacer sa configuration ?"
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "Nouveau nom de l'imprimante"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Transfert de %s..."
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-"Vous avez transféré votre précédente imprimante par\n"
-"défaut(« %s »), doit-elle être également l'imprimante\n"
-"par défaut de votre nouveau système d'impression %s ?"
-
-#: ../../printerdrake.pm_.c:1423
-msgid "Refreshing printer data ..."
-msgstr "Mise à jour des données de l'imprimante..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Configuration de l'imprimante"
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Démarrage de votre connexion..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-msgid "Configure the network now"
-msgstr "Configurez le réseau maintenant"
-
-#: ../../printerdrake.pm_.c:1455
-msgid "Network functionality not configured"
-msgstr "Les fonctionnalités du réseau ne sont configurées"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-msgid "Go on without configuring the network"
-msgstr "Continuer sans configurer le réseau"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Activation du système d'impression au démarrage"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "high"
-msgstr "élevée"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "paranoid"
-msgstr "paranoïaque"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Starting the printing system at boot time"
-msgstr "Activation du système d'impression au démarrage"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-"Le système d'impression (%s) ne sera pas activé automatiquement\n"
-"lors du démarrage de la machine.\n"
-"\n"
-"Il est possible que l'activation automatique ait été supprimée\n"
-"par l'utilisation d'un plus grand niveau de sécurité, car les\n"
-"systèmes d'impression sont des points d'attaques potentiels.\n"
-"\n"
-"Voulez-vous rétablir l'activation automatique du système\n"
-"d'impression ?"
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "Vérification du logiciel installé..."
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "Suppression de LPRng..."
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "Suppression de LPD..."
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Choisissez le gestionnaire d'impression"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Quel système d'impression (gestionnaire) désirez-vous utiliser ?"
-
-# Attention à la largeur autorisée (colone de gauche dans DrakX). Ajout
-# du « des » interdit pour cause de manque de place
-#: ../../printerdrake.pm_.c:1759
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configuration de l'imprimante « %s »..."
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Options de l'imprimante"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr "Préparation de PrinterDrake..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "Désirez-vous configurer l'impression ?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr "Système d'impression : "
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-"Les imprimantes suivantes sont configurées.\n"
-"Cliquez sur l'une d'entre elles pour la modifier\n"
-"ou pour obtenir des informations, ou cliquez sur\n"
-"« Ajouter une imprimante » pour ajouter une nouvelle\n"
-"imprimante."
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Mode normal"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Défaut)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Imprimante(s) sur serveur(s) CUPS distant(s)"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-msgid "Printer(s) on remote server(s)"
-msgstr "Imprimante(s) sur serveur(s) distant(s)"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Ajouter une imprimante"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Désirez-vous tester la configuration ?"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "Modifier la configuration de l'imprimante"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Imprimante %s : %s %s\n"
-"Que souhaitez-vous modifier sur cette imprimante ?"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "Faire"
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "Type de connexion à l'imprimante"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "Nom de l'imprimante, description, emplacement"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "Constructeur de l'imprimante, modèle, pilote"
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "Constructeur de l'imprimante, modèle"
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr "Faire de cette imprimante celle par défaut"
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "Imprimer des pages de test"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr "Savoir comment imprimer avec cette imprimante"
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "Enlever l'Imprimante"
-
-#: ../../printerdrake.pm_.c:2071
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Enlever l'ancienne imprimante « %s »..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "L'imprimante « %s » est maintenant l'imprimante par défaut."
-
-#: ../../printerdrake.pm_.c:2103
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Désirez-vous vraiment enlever l'imprimante « %s »?"
-
-#: ../../printerdrake.pm_.c:2105
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Suppression de l'imprimante « %s »..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Configuration des serveurs mandataires"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Bienvenue dans la configuration du serveur mandataire.\n"
-"\n"
-"Vous allez pouvoir configurer ici vos serveurs mandataires http et ftp\n"
-"avec ou sans identifiant et mot de passe\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Veuillez entrer les informations concernant le mandataire http\n"
-"ou laissez-les vide si vous ne voulez pas de ce mandataire"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "L'URL doit commencer par 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Le numéro de port doit être numérique"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Veuillez entrer les informations concernant le mandataire ftp\n"
-"ou laissez-les vide si vous ne voulez pas de ce mmandataire"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "L'URL doit commencer par 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Veuillez entrer l'identifiant et le mot de passe pour le mandataire,\n"
-"si nécessaire.\n"
-"Laissez-les vide si vous n'en voulez-pas"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Mot de passe"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "Ré-entrer le mot de passe"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Les mots de passe ne correspondent pas. Réessayez !"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-"Impossible d'ajouter une partition au RAID md%d car\n"
-"celui-ci est déjà formaté"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Impossible d'écrire le fichier %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid a échoué"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid a échoué (les « raidtools » sont-ils installés ?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Trop peu de partitions pour du RAID niveau %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Démarrer le système sonore ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, un gestionnaire de commandes périodiques."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Apmd est utilisé pour surveiller et journaliser (via syslog) l'état de la\n"
-"batterie. Il peut également être utilisé pour arrêter la machine lorsque\n"
-"la batterie est très faible."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Exécute des commandes planifiées par la commande « at » à l'heure spécifiée\n"
-"lorsque cette commande activée. Permet également d'exécuter des commandes\n"
-"de traitement par lots lorsque la charge du système est basse."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Cron est un programme UNIX standard permettant d'éxécuter des programmes\n"
-"à des heures planifiées. Vixie cron ajoute des fonctionnalités au cron UNIX\n"
-"de base (notamment une meilleure sécurité et des options de configuration\n"
-"plus complètes."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM permet d'utiliser la souris dans des applications (telles Midnight\n"
-"Commander) fonctionnant en mode console. Il permet également d'utiliser le\n"
-"copier-coller et inclut le support des menus contextuels sur la console."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake effectue une détection matérielle, et configure\n"
-"éventuellement le nouveau matériel."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache est un serveur World Wide Web. Il est utilisé pour fournir des\n"
-"fichiers HTML et exécuter des CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Le super serveur Internet (habituellement appelé inetd) démarre d'autres\n"
-"services Internet lorsque cela est nécessaire. Il est responsable du\n"
-"démarrage de nombreux services (parmis lesquels telnet, ftp, rsh et "
-"rlogin).\n"
-"Le désactiver revient à désactiver tous les services qu'il gère."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Démarrer le filtrage des paquets pour la série 2.2 des noyaux Linux,\n"
-"afin de mettre en place un pare-feu (firewall) pour protéger votre\n"
-"machine des attaques en provenance du réseau. "
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ce paquetage charge la table de clavier définie dans le fichier\n"
-"/etc/sysconfig/keyboard. Cette table peut être modifiée en utilisant\n"
-"l'outil kbdconfig. Ce service devrait être activé sur la plupart des\n"
-"machines."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Re-génération automatique des en-têtes noyau dans /boot pour\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Détection automatique et configuration du matériel au démarrage."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf effectuera certaines tâches au démarrage afin\n"
-"de maintenir la configuration du système."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Lpd est le serveur d'impression. Il est nécessaire au bon fonctionnement\n"
-"de lpr. Shématiquement, il permet d'attribuer les travaux d'impression\n"
-"à (ou aux) l'imprimante."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Le Linux Virtual Server, utilisé pour créer un réseau haute-performance\n"
-"et haute disponibilité."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"Named (BIND) est un Domain Name Server (DNS - un serveur de noms) utilisé\n"
-"pour résoudre les noms d'hôtes en adresses IP."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monte et démonte les points de montage de type Network File System (NFS),\n"
-"SMB (couramment appelé LanManager sous Windows) et NCP (NetWare)."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Active / désactive les interfaces réseau configurées pour démarrer lors\n"
-"de l'initialisation du système."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS est un protocole très utilisé pour partager des fichiers sur des\n"
-"réseaux TCP/IP. Ce service fournit les fonctionnalités serveur de NFS,\n"
-"telles qu'elles sont configurées dans le fichier /etc/exports."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS est un protocole très utilisé pour partager des fichiers sur des\n"
-"réseaux TCP/IP. Ce service permet l'utilisation des fonctionnalités de\n"
-"verrouillage des fichiers."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Activation de la touche numlock du pavé numérique, pour\n"
-"la console et XFree, au démarrage."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Support des imprimantes winprinter OKI 4w et compatibles."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA permet d'utiliser des périphériques tels des cartes Ethernet ou des\n"
-"modems avec des ordinateurs portables. Ce service ne sera pas démarré à\n"
-"moins qu'il soit correctement configuré. Il peut donc être activé sans\n"
-"danger sur des machines ne possédant pas ce type de périphériques."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Le portmapper gère les connexions RPC. Ces dernières sont utilisées\n"
-"par des protocoles tels NFS et NIS. Le serveur portmap doit être activé\n"
-"sur des machines jouant le rôle de serveur pour des protocoles utilisant\n"
-"le mécanisme RPC."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix est un agent de transport du courrier (Mail Transport Agent - MTA)\n"
-"permettant l'échange de courriers électroniques entre machines."
-
-#  ???
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Sauvegarde et restaure l'entropie du système pour une meilleure\n"
-"génération de nombres aléatoires."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Assigner des périphériques à accès direct (raw devices) aux\n"
-"périphériques bloc (comme des partitions de disque dur), pour\n"
-"les applications comme Oracle."
-
-#  ???
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Le démon routed autorise la mise à jour automatique des tables de\n"
-"routage IP grâce au protocole RIP. Bien que RIP soit très utilisé\n"
-"sur les petits réseaux, des protocoles de routage plus complets sont\n"
-"nécessaires pour les réseaux de plus grande taille."
-
-#  ???
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Le protocole rstat permet aux utilisateurs sur un même réseau\n"
-"d'obtenir des mesures de la performance de n'importe quelle\n"
-"machine sur ce réseau."
-
-#  ???
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Le protocole rusers permet aux utilisateurs de connaître tous\n"
-"les utilisateurs connectés aux machines supportant ce protocole."
-
-#  ???
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Le protocole rwho permet aux utilisateurs distants d'obtenir une\n"
-"liste des utilisateurs connectés à une machine qui fait tourner\n"
-"le démon rwho (similaire à finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Démarrer le système de gestion du son sur votre machine"
-
-#  ???
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog est un service utilisé par beaucoup de démons pour enregistrer\n"
-"des messages dans différents fichiers de journalisation. C'est une\n"
-"très bonne idée de toujours l'activer."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Charger les pilotes de périphériques usb."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Démarre le serveur de polices de X (c'est indispensable au fonctionnement\n"
-"de XFree)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Choisissez les services à démarrer automatiquement lors du démarrage du "
-"système"
-
-#: ../../services.pm_.c:126
-msgid "Printing"
-msgstr "Impression"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr "Partage de fichiers"
-
-#: ../../services.pm_.c:132
-msgid "System"
-msgstr "Système"
-
-#: ../../services.pm_.c:137
-msgid "Remote Administration"
-msgstr "Administration à distance"
-
-#: ../../services.pm_.c:145
-msgid "Database Server"
-msgstr "Serveur de base de données"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Services : %d activés sur %d enregistrés"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Services"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "actif"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "arrêté"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Services et démons"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Pas d'autre information\n"
-"au sujet de ce service, désolé."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Au démarrage"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Installation des paquetages..."
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"La table des partitions ne peut être lue car elle est trop endommagée.\n"
-"Une réinitialisation des partitions endommagées va être tentée."
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "Erreur !"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Je n'arrive pas à trouver le fichier image « %s »."
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "Configurateur d'installation automatisée"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Vous êtes sur le point de configurer une disquette d'auto-installation. "
-"Cette fonctionnalité est relativement dangereuse, et doit donc être utilisée "
-"avec soin.\n"
-"\n"
-"À l'aide de cette fonctionnalité, vous allez pouvoir rejouer l'installation "
-"que vous avez effectuée sur cet ordinateur, tout en ayant le choix de "
-"répondre à certaines questions à votre convenance, afin de changer les "
-"paramètres des étapes incriminées.\n"
-"\n"
-"Pour une sûreté maximale, les étapes de partitionnement et de formatage ne "
-"seront jamais faites automatiquement, quelque soit les choix que vous aviez "
-"fait lors de la première installation de cet ordinateur.\n"
-"\n"
-"Souhaitez-vous continuer ?"
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "Configuration des étapes automatiques"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Veuillez choisir, pour chaque étape, si celle-ci doit être rejouée comme "
-"pendant votre installation, ou si elle doit s'effectuer manuellement"
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Félicitations !"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"La disquette a été générée avec succès.\n"
-"Vous pouvez maintenant rejouer votre installation."
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Partage de la connexion Internet"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Le partage de la connexion Internet est activé"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuration du partage de la connexion à Internet a déjà été\n"
-"effectuée. Elle est actuellement activée.\n"
-"\n"
-"Que voulez-vous faire ?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "désactiver"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "ne rien faire"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "reconfigurer"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Désactivation des serveurs..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Le partage de la connexion à Internet est maintenant désactivé."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Le partage de la connexion à Internet est désactivé"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuration du partage de la connexion à Internet a déjà été\n"
-"effectuée. Elle est actuellement désactivée.\n"
-"\n"
-"Que voulez-vous faire ?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "activer"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Activation des serveurs..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Le partage de la connexion Internet est maintenant activé."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Votre ordinateur peut être paramétré afin de partager sa connexion à\n"
-"Internet.\n"
-"Avec cette fonctionnalité, d'autres ordinateurs sur votre réseau local\n"
-"pourront utiliser la connexion Internet de cet ordinateur.\n"
-"\n"
-"Veuillez noter que vous avez besoin d'une carte réseau dédiée à votre "
-"réseau\n"
-"local."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (utilisant le module %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Aucune carte réseau n'est présente dans votre système"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Aucune carte réseau n'a été détectée sur votre système. Veuillez utiliser "
-"l'outil de configuration du matériel."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Carte réseau"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Une seule carte réseau est configurée sur votre système :\n"
-"\n"
-"%s\n"
-"\n"
-"Je vais configurer votre réseau local avec cette carte réseau."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Veuillez choisir quelle carte réseau sera connectée à votre réseau local"
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Attention, la carte réseau est déjà configurée. Je vais la reconfigurer."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Conflit potentiel d'adresses du réseau local trouvé dans la configuration de "
-"%s !\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Configuration du Firewall détectée"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Attention ! Une configuration existante du Firewall a été détectée. Vous "
-"devrez peut-être modifier la configuration manuellement après l'installation."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Configuration en cours..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Configuration des scripts, installation des logiciels, démarrage des "
-"serveurs..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Des problèmes sont apparus en installant le paquetage %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Tout a été configuré.\n"
-"Vous pouvez maintenant partager votre connexion à Internet avec d'autres "
-"ordinateurs sur votre réseau local, en utilisant la configuration réseau "
-"automatique (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"La configuration a déjà été effectuée, mais elle est actuellement désactivée."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"La configuration a déjà été effectuée, et elle est actuellement activée."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Le partage de la connexion Internet n'a encore jamais été configuré."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Configuration du partage de la connexion Internet"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Bienvenue dans l'utilitaire de partage de connexion Internet !\n"
-"\n"
-"%s\n"
-"\n"
-"Cliquez sur Configurer pour lancer l'assistant de configuration."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuration du réseau (%d cartes réseaux)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profil : "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Effacer le profil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Profil à effacer :"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Nouveau profil..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Nom du profil à créer (le nouveau profil est créé comme une copie du profil "
-"courant :"
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Nom de machine : "
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Accès Internet"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Type :"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Passerelle :"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Interface :"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "État :"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Connecté"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Non connecté"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Se connecter..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Se déconnecter..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Démarrage de votre connexion..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Arrêt de votre connexion..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"La connexion n'est pas arrêtée.\n"
-"Essayez de le faire manuellement en exécutant\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"en tant que root."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Le système est à présent déconnecté."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Configurer l'accès à Internet..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "Configuration LAN (réseau local)"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Pilote"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protocole"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "État"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Configurer le réseau local..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr "Cliquez ici pour lancer l'assistant ->"
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Appliquer"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Veuillez patienter... mise en place de la configuration"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Vous n'avez aucune interface réseau configurée.\n"
-"Vous pouvez en configurer une en cliquant sur « Configurer »"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "Configuration du LAN (réseau local)"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Carte réseau %s : %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Protocole de démarrage"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Lancer au démarrage"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "activer maintenant"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "désactiver maintenant"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Vous n'avez aucune connection à Internet.\n"
-"Vous pouvez en créer une en cliquant sur « Configurer »"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Configuration de la connexion Internet"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Configuration de la connexion Internet"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Type de connexion : "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Paramètres"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Carte ethernet"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Bienvenue aux pirates"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Très faible"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoïaque"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ce niveau de sécurité doit être utilisé avec précaution. Il rend votre\n"
-"système plus facile à utiliser, aux dépens de la sécurité. Il ne devrait\n"
-"donc pas être utilisé sur une machine connectée à un réseau ou à Internet.\n"
-"Aucun mot de passe n'est requis."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Les mots de passe sont maintenant requis. Pour autant, il n'est pas\n"
-"recommandé d'utiliser cette machine sur un réseau."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Ce niveau de sécurité contient quelques améliorations. La principale est\n"
-"qu'il y a plus d'avertissements et de vérifications quant à la sécurité."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Ceci est le niveau de sécurité recommandé pour un ordinateur devant être\n"
-"utilisé pour se connecter à Internet en tant que client. Les vérifications\n"
-"de sécurité sont maintenant activées."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Avec ce niveau de sécurité, l'utilisation de cette machine en tant que\n"
-"serveur devient envisageable. La sécurisation est suffisament forte pour\n"
-"accepter les connexions de nombreux clients."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Avec ce niveau, la sécurité est maximale, mais le système est entièrement "
-"clos."
-
-#: ../../standalone/draksec_.c:65
-msgid "Security level"
-msgstr "Niveau de sécurité"
-
-#: ../../standalone/draksec_.c:67
-msgid "Use libsafe for servers"
-msgstr "Utilisation de libsate pour les serveurs"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Une bibliothèque qui défend contre les attaques de type « dépassement de\n"
-"capacité » ou « chaîne de format »."
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Mise en place du niveau de sécurité"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centre de contrôle"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Choisissez l'outil que vous voulez utiliser"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "utilisation : keyboarddrake [--expert] [clavier]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Voulez-vous que la touche BackSpace retourne Delete en console ?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Changer de Cd-Rom"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Changement de CD-ROM\n"
-"\n"
-"Veuillez insérer le CD-ROM d'Installation dans votre lecteur.\n"
-"Ceci fait, cliquez sur « OK ».\n"
-"\n"
-"Si vous ne le possédez pas, cliquez sur « Annuler » pour annuler la mise à "
-"jour."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Impossible de démarrer la mise à jour !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "aucun périphérique USB série trouvé\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Émuler le troisième bouton ?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Configuration du Firewall"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Configuration du Firewall"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall (pare-feu)\n"
-"\n"
-"Vous avez déjà configuré un firewall.\n"
-"Cliquez sur « Configurer » pour changer ou supprimer le firewall"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Pare-feu (Firewall)\n"
-"\n"
-"Cliquez sur Configurer pour mettre en place un pare-feu standard"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Choix de la langue"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Classe d'installation"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Détection des disques durs"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configuration de la souris"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Choix du clavier"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sécurité"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Systèmes de fichiers"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatage des partitions"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Choix des paquetages"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installation du système"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Ajout des utilisateurs"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configuration du réseau"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configuration des services"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Disquette de démarrage"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Chargeur de démarrage"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configuration de X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Fin de l'installation"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Configuration d'un mini-firewall\n"
-"\n"
-"Cela configure un firewall (pare-feu) personnel pour votre machine Mandrake "
-"Linux.\n"
-"Si vous souhaitez un firewall plus puissant ou dédié, veuillez plutôt "
-"utiliser\n"
-"la distribution spécialisée « MandrakeSecurity »."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Nous allons maintenant vous poser des questions sur quels services vous\n"
-"souhaitez pouvoir connecter à Internet. Veuillez réfléchir avec soin sur\n"
-"chacune de ces questions, car la sécurité de votre ordinateur est\n"
-"importante.\n"
-"\n"
-"S'il vous plaît, si vous n'utilisez par l'un de ces services,\n"
-"désactivez-le. Vous pouvez changer cette configuration n'importe quand, en\n"
-"redémarrant cette application !"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Utilisez-vous un serveur web sur cette machine, que vous avez besoin de\n"
-"rendre visible depuis tout Internet ? Si vous utilisez un serveur web\n"
-"pour seulement cette machine, vous pouvez répondre NON ici.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Utilisez-vous un serveur de nom sur cette machine ? Si vous n'avez pas\n"
-"configuré un tel serveur pour donner des informations d'IP et de zone\n"
-"pour tout Internet, veuillez répondre NON.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Voulez-vous permettre les connexions sécurisées entrantes (par le\n"
-"protocole ssh) ? C'est un remplacement de telnet que vous pouvez utiliser\n"
-"pour vous connecter sur une machine distante. Si vous utilisez telnet en\n"
-"ce moment, vous devriez vraiment passer à ssh. telnet n'est pas encrypté\n"
-"-- par exemple des pirates peuvent voler votre mot de passe. ssh est\n"
-"encrypté et interdit les écoutes clandestines (eavesdropping)."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Voulez-vous permettre les connexions entrantes en telnet ?\n"
-"C'est très dangereux, comme nous l'avons expliqué dans l'écran précédent.\n"
-"Nous recommandons fortement de répondre NON ici et d'utiliser ssh à\n"
-"la place de telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Utilisez-vous un serveur FTP, que vous voulez visible depuis Internet ?\n"
-"Si c'est le cas, nous recommandons fortement de ne l'utiliser que\n"
-"pour les transferts en mode anonyme. Tous les mots de passe envoyés\n"
-"par FTP peuvent être volés par des pirates, car FTP n'utilise pas\n"
-"non plus d'encryption pour transférer les mots de passe.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Utilisez-vous un serveur de mail (courrier électronique) ? Si vous\n"
-"envoyez des messages avec pine, mutt ou d'autres clients mail texte,\n"
-"vous en utilisez probablement un. Sinon, vous devriez répondre NON.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Utilisez-vous un serveur POP ou IMAP ? C'est utilisé pour\n"
-"héberger des comptes mail qui ne sont pas basés sur des interfaces\n"
-"web.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Vous utilisez un noyau en version 2.2. Si votre adresse IP réseau est\n"
-"attribuée automatiquement par un ordinateur sur votre réseau (adresse\n"
-"dynamique), nous avons besoin d'autoriser cela. Est-ce le cas ?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Est-ce que l'heure de votre ordinateur est synchronisée avec un\n"
-"autre ordinateur ? La plupart du temps, c'est utilisé par des\n"
-"sociétés de taille moyenne ou grande, basées sur Unix/Linux,\n"
-"pour synchroniser les heures de connexion, etc. Si vous ne\n"
-"faites pas partie d'une telle société et n'avez pas entendu\n"
-"parler de ce problème, vous n'avez probablement pas besoin\n"
-"de ce service."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"La configuration est terminée. Devons-nous écrire ces changements sur "
-"disque ?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Échec de l'ouverture de %s : %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Echec de l'ouverture de %s en écriture : %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Ordinateur réseau (client)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Serveur NFS, serveur SMB, serveur Proxy (mandataire), serveur SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Bureautique"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Station de travail Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Outils pour votre Palm Pilot ou votre Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Station de travail"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Routeur"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Serveur de Nom et serveur d'Information Réseau"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programmes pour la bureautique : traitements de texte (kword, abiword), "
-"tableurs (kspread, gnumeric), visualiseur pdf, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Outils audio : lecteurs mp3 ou midi, mixeurs, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Livres et Howto's sur Linux et le Logiciel Libre"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Station de travail KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimédia - Vidéo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Utilitaires pour le courrier électronique, les news, le web, le transfert de "
-"fichiers, les discussions en ligne"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Base de Données"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Serveurs de bases de données PostgreSQL ou MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Outils pour faciliter la configuration de votre ordinateur"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimédia - Son"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilitaires"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentation"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Utilitaires console"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Serveur de courrier Postfix, serveur de news Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimédia"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configuration"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Plus d'Environnements de Bureau (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Le K Desktop Environement, l'environnement de bureau de base avec sa "
-"collection d'outils"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Environnement graphique"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Développement"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache et Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Outils pour créer et graver des CD's"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Station de travail bureautique"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programmes de graphisme comme The gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-"Bibliothèques de développement C et C++, programmes et fichiers d'entête"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Serveur réseau"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "E-mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Jeux"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Lecteurs et éditeurs vidéo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimédia - Graphisme"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-"Programmes de divertissement : jeux d'arcade, de plateaux, de stratégie, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Ensemble d'outils pour lire ou envoyer des courriers électronique (pine, "
-"mutt), des news (tin), et pour naviguer sur le Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivage, émulateurs, surveillance"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Gestion Financière"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Un environnement de bureau avec un ensemble d'applications et d'outils "
-"intuitifs"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clients pour différents protocoles dont ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Passerelle Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programmes pour jouer/éditer du son et de la vidéo"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Autres Environnements de Bureau"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Éditeurs, interpréteurs, utilitaires fichiers, terminaux"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programmes pour gérer votre finance, comme gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Jeux"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Gestionnaire d'Information Personnel"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimédia - Gravage de CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Applications scientifiques"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "échec de l'ouverture de /etc/sysconfig/autologin en lecture : %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Désirez-vous relancer la configuration du réseau ?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Êtes vous d'accord ?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Je vais redémarrer le périphérique réseau:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Le périphérique réseau %s doit être redémarré. Êtes-vous d'accord ?"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "À moins de savoir exactement ce que vous faites, choisissez toujours\n"
-#~ "« /dev/hda » (premier disque dur situé sur la première nappe IDE) ou\n"
-#~ "« /dev/sda » (premier disque SCSI)."
-
-#~ msgid ""
-#~ "The printing system which you are going to use (%s) needs basic \n"
-#~ "network functionality, but your network functionality is not\n"
-#~ "configured yet. If you go on without network configuration, your\n"
-#~ "printing system will set up a network only consisting of the \n"
-#~ "local machine which does not allow the usage of remote printers\n"
-#~ "or the sharing of a local printer with remote clients, but you\n"
-#~ "can set up local printers usable from your local machine. How do\n"
-#~ " you want to proceed?"
-#~ msgstr ""
-#~ "Le système d'impression que vous allez utiliser (%s) a besoin\n"
-#~ "de certaines fonctionnalités réseau, mais votre réseau n'a pas\n"
-#~ "encore été configuré. Si vous continuez sans aucune configuration\n"
-#~ "réseau, votre système d'impression mettra en place un réseau\n"
-#~ "réduit à votre seule machine locale. Ceci ne permettra pas\n"
-#~ "l'utilisation d'imprimantes distantes ou le partage de l'imprimante\n"
-#~ "avec des clients distants. Néanmoins, vous pouver configurer\n"
-#~ "l'imprimante locale pour qu'elle fonctionne avec votre machine\n"
-#~ "locale.\n"
-#~ "Que voulez-vous faire ?"
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Les imprimantes suivantes sont configurées.\n"
-#~ "Vous pouvez les modifier ou en ajouter."
-
-#~ msgid "Spooler: "
-#~ msgstr "Gestionnaire d'impression"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Veuillez tester votre souris ici."
-
-#~ msgid "Press next to continue."
-#~ msgstr "Appuyez sur suivant pour continuer."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "Choisissez votre langue préférée pour l'installation et l'utilisation du "
-#~ "système."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Vous devez accepter les termes de la licence ci-dessus pour continuer "
-#~ "l'installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Veuillez cliquer sur « Accepter » si vous être d'accord avec ses termes.\n"
-#~ "\n"
-#~ "\n"
-#~ "Veuillez cliquer sur « Refuser » si vous n'acceptez pas ses termes. "
-#~ "L'installation\n"
-#~ "prendra fin sans modifier votre configuration actuelle."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Choisissez la disposition de votre clavier dans la liste ci-dessus."
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Si vous désirez que d'autres langues que celle que vous avez choisie au\n"
-#~ "début de l'installation soient disponibles après l'installtion, veuillez\n"
-#~ "les choisir dans la liste ci-dessus."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Choisissez :\n"
-#~ "\n"
-#~ "  - Personnalisée : si vous connaissez déja GNU-Linux, vous pouvez "
-#~ "choisir quelle sera l'utilisation principale de cette machine. Voyez ci-"
-#~ "après pour plus de détails.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert : si vous connaissez déja tout de GNU-Linux et que vous voulez "
-#~ "conserver l'entière maîtrise de l'installation, cette classe est faite "
-#~ "pour vous. Vous pourrez sélectionner le type d'utilisation du système de "
-#~ "la même manière que pour l'installation personnalisée.\n"
-#~ "\n"
-#~ "Attention : l'utilisation de cette classe d'installation nécessite une "
-#~ "bonne connaissance de GNU-Linux. NE L'UTILISEZ DONC PAS À MOINS DE SAVOIR "
-#~ "CE QUE VOUS FAÎTES."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Les différents choix quant à l'utilisation de votre machine (si vous "
-#~ "avez\n"
-#~ "choisi « Personnalisé » ou « Expert ») sont les suivants :\n"
-#~ "\n"
-#~ "  - Normal : choisissez cette option si cet ordinateur est "
-#~ "principalement\n"
-#~ "    destiné à un travail quotidien (travail de bureau, manipulation "
-#~ "d'images\n"
-#~ "    et autres). Aucun outil de développement ou compilateur ne sera "
-#~ "installé.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Développement : comme son nom l'indique, cette option configure cet\n"
-#~ "    ordinateur pour le développement logiciel. Une collection complète "
-#~ "de\n"
-#~ "    logiciels destinés à la compilation, au déverminage, au formatage du\n"
-#~ "    code source et la création de paquetages logiciels seront installés.\n"
-#~ "\n"
-#~ "  - Serveur : choisissez cette option si vous souhaitez utiliser cet "
-#~ "ordinateur\n"
-#~ "    en tant que serveur. Ce dernier peut être un serveur de fichiers (NFS "
-#~ "ou\n"
-#~ "    SMB), un serveur d'impression (protocole « lp » d'Unix ou impression "
-#~ "SMB\n"
-#~ "    (principalement utilisé avec Microsoft Windows)), d'authentification "
-#~ "(NIS),\n"
-#~ "    de bases de données ou tout autre chose pouvant être utilisé en mode\n"
-#~ "    serveur. En raison de la destination de cette machine, aucun logiciel "
-#~ "non\n"
-#~ "    indispensable (tels KDE ou GNOME) ne seront installés."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Vous pouvez sélectionner les groupes de paquetages que vous voulez\n"
-#~ "installer ou mettre à jour.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX vérifiera que vous avez assez de place pour tous les installer. Si "
-#~ "tel n'est pas le cas, il vous préviendra. Si vous ne tenez pas compte de "
-#~ "cet avertissement, il installera les paquetages sélectionnés mais "
-#~ "supprimera quelques paquetages de moindre intérêt. Une option située en "
-#~ "bas de la liste vous permet de choisir de sélectionner les paquetages "
-#~ "« individuellement ». Si vous faîtes ce choix une liste de plus de mille "
-#~ "(1000) paquetages vous sera présentée."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Vous pouvez maintenant choisir individuellement chaque paquetage que "
-#~ "vous\n"
-#~ "désirez installer.\n"
-#~ "\n"
-#~ "\n"
-#~ "Vous pouvez étendre ou refermer l'arbre en cliquant sur les icônes "
-#~ "disponibles\n"
-#~ "en bas à gauche de la fenêtre des paquetages.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si vous préférez afficher la liste des paquetages en la triant par ordre\n"
-#~ "alphabétique, cliquez sur l'icône « Basculer d'un affichage alphabétique "
-#~ "à un\n"
-#~ "tri par groupes ».\n"
-#~ "\n"
-#~ "\n"
-#~ "Si vous ne désirez pas être averti sur les dépendances, cliquez sur "
-#~ "« Gestion\n"
-#~ "automatique des dépendances ». Si vous activez cette option, veuillez "
-#~ "noter que\n"
-#~ "la désélection d'un paquetage peut en désélectionner plusieurs autres "
-#~ "(dépendants\n"
-#~ "de celui-ci) sans que vous en soyez avertis."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Si vous possédez tous les CD mentionnés dans la liste ci-dessus, cliquez "
-#~ "sur « OK ». Dans le cas contraire, cliquez sur sur « Annuler ». Si seuls "
-#~ "quelques CD manquent, désélectionnez les puis cliquez sur « OK »."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "Vous pouvez maintenant tester votre souris. Utilisez les boutons\n"
-#~ "et la molette pour vérifier si les paramètres sont corrects. Si non,\n"
-#~ "vous pouvez cliquer sur « Annuler » pour choisir un autre pilote.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si vous faites une installation sur une machine Apple avec une\n"
-#~ "souris à un bouton, il vous sera donné la possibilité de définir\n"
-#~ "des touches du clavier pour émuler les deuxième et troisième\n"
-#~ "boutons de la souris. Cela vous permettra d'avoir accès à toutes\n"
-#~ "les fonctionnalités de la souris à la fois dans la console Linux et\n"
-#~ "sous l'interface X Window.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si vous avez une souris ADB, merci de choisir USB, car le noyau\n"
-#~ "Linux va prendre en charge de configurer votre souris correctement."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Si vous désirez connecter votre ordinateur à Internet ou à un réseau "
-#~ "local,\n"
-#~ "veuillez choisir l'option appropriée. Veuillez mettre sous tension le\n"
-#~ "périphérique avant de choisir l'option appropriée si vous désirez que "
-#~ "DrakX\n"
-#~ "le détecte automatiquement.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si vous ne possédez pas d'accès à Internet ou à un réseau local, "
-#~ "choisissez\n"
-#~ "\"désactiver le réseau\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Si vous désirez configurer le réseau après avoir installé votre nouveau "
-#~ "système,\n"
-#~ "ou si vous avez fini de configurer le réseau, choisissez « Terminer »."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Aucun modem n'a été détecté. Veuillez sélectionner le port série sur "
-#~ "lequel\n"
-#~ "il est branché.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pour information, le premier port série (appelé « COM1 » sous Microsoft\n"
-#~ "Windows) est appelé « ttyS0 » sous Linux."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Vous pouvez maintenant indiquer les options de connexion. Si vous ne "
-#~ "savez\n"
-#~ "pas quoi indiquer ou n'êtes pas certain de l'exactitude des données en "
-#~ "votre\n"
-#~ "possession, vous pouvez obtenir les informations correctes\n"
-#~ "auprès de votre fournisseur d'accès. Si vous n'entrez pas le DNS (serveur "
-#~ "denoms), cette information sera obtenue au moment de la connexion."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Si votre modem est un modem externe, veuillez le mettre sous tension "
-#~ "maintenant\n"
-#~ "si vous désirez que DrakX essaye de le détecter automatiquement."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Veuillez allumer votre modem et choisir le modèle approprié."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Si vous n'êtes pas certain de l'exactitude des informations ci-dessus\n"
-#~ "ou si vous ne savez pas quoi indiquer, veuillez noter que les\n"
-#~ "informations appropriées peuvent être obtenues auprès de votre "
-#~ "fourniseur\n"
-#~ "d'accès. De plus, si vous n'indiquez pas les informations\n"
-#~ "relatives aux DNS (serveurs de noms), ces dernières seront obtenues "
-#~ "auprès\n"
-#~ "de votre fournisseur d'accès lors de la connexion."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Vous pouvez maintenant configurer votre accès Internet. Si vous ne savez\n"
-#~ "pas quoi indiquer ou n'êtes pas certain de vos choix, veuillez contacter\n"
-#~ "votre fournisseur d'accès à Internet."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Veuillez indiquer :\n"
-#~ "\n"
-#~ "   * L'adresse IP : si vous ne la connaissez pas, contactez votre "
-#~ "administrateur\n"
-#~ "réseau ou votre fournisseur d'accès à Internet.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Netmask : « 255.255.255.0 » est générallement un bon choix. Si vous "
-#~ "n'en\n"
-#~ "êtes pas certain(e), contactez votre administrateur réseau ou fournisseur "
-#~ "à\n"
-#~ "Internet.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Attribution automatique de l'adresse IP : Si votre réseau vous "
-#~ "permet\n"
-#~ "d'utiliser les protocoles « bootp » ou « dhcp », activez cette option. "
-#~ "Si\n"
-#~ "vous l'activez, aucune valeur n'est requise dans la rubrique « Adresse IP "
-#~ "».\n"
-#~ "Si vous n'êtes pas certain de pouvoir l'utiliser, contactez votre\n"
-#~ "administrateur réseau ou votre fournisseur d'accès à Internet."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Vous pouvez maintenant indiquer votre nom d'hôte si ce dernier est "
-#~ "nécessaire.\n"
-#~ "Si vous ne savez pas quoi indiquer ou n'êtes pas certain des paramêtres "
-#~ "à\n"
-#~ "indiquer, veuillez contacter votre administrateur réseau."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Vous pouvez maintenant indiquer votre nom d'hôte si ce dernier est "
-#~ "nécessaire.\n"
-#~ "Si vous ne savez pas quoi indiquer ou n'êtes pas certain du nom à "
-#~ "indiquer,\n"
-#~ "veuillez contacter votre administrateur réseau."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Vous pouvez maintenant configurer votre accès Internet. Si vous ne savez\n"
-#~ "pas quoi indiquer, contacter votre fournisseur d'accès à Internet."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Si vous désirez utiliser des serveurs mandataires (proxy), vous pouvez\n"
-#~ "les configurer maintenant. Si vous ignorez si vous pouvez en utiliser "
-#~ "un,\n"
-#~ "contactez votre administrateur réseau ou votre fournisseur d'accès à "
-#~ "Internet."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Si votre connexion à Internet a été correctement configurée, vous pouvez\n"
-#~ "maintenant installer des logiciels relatifs à la cryptographie. La "
-#~ "première\n"
-#~ "étape sera de choisir un serveur depuis lequel télécharger les logiciels\n"
-#~ "que vous voulez installer. Il vous faudra ensuite choisir les paquetages "
-#~ "à\n"
-#~ "installer.\n"
-#~ "\n"
-#~ "\n"
-#~ "VEUILLEZ NOTER QUE VOUS NE POUVEZ INSTALLER DE LOGICIELS RELATIFS À LA\n"
-#~ "CRYPTOGRAPHIE QUE SI LA LÉGISLATION À LAQUELLE VOUS ÊTES SOUMIS(E) VOUS "
-#~ "L'Y\n"
-#~ "AUTORISE."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr ""
-#~ "Vous pouvez maintenant sélectionner votre zone horaire, en fonction de "
-#~ "celle\n"
-#~ "dans laquelle vous vivez."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Vous pouvez configurer une imprimante locale (connectée à votre "
-#~ "ordinateur)\n"
-#~ "ou distante (accessible via un réseau Unix, NetWare ou Microsoft Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Si vous souhaitez pouvoir imprimer, veuillez choisir un système "
-#~ "d'impression.\n"
-#~ "Vous avez le choix entre LPR et CUPS.\n"
-#~ "\n"
-#~ "CUPS est un nouveau système d'impression, souple et puissant pour les\n"
-#~ "systèmes Unix (CUPS signifie « Common Unix Printing System). Il est le\n"
-#~ "système d'impression par défaut de Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR est l'ancien système d'impression disponible dans les précédentes "
-#~ "versions\n"
-#~ "de Mandrake Linux."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU-Linux peut manipuler plusieurs types d'imprimantes. Chacune d'entre "
-#~ "elles\n"
-#~ "requiert une configuration différente.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si votre imprimante est physiquement connectée à votre ordinateur, "
-#~ "sélectionnez\n"
-#~ "« Imprimante locale ».\n"
-#~ "\n"
-#~ "\n"
-#~ "Si vous désirez accéder à une imprimante accessible via un serveur Unix,\n"
-#~ "sélectionnez « Imprimante distante ».\n"
-#~ "\n"
-#~ "\n"
-#~ "Si vous désirez accéder à une imprimante accessible via un serveur "
-#~ "Microsoft\n"
-#~ "Windows (ou via une machine Unix utilisant le protocole SMB), "
-#~ "sélectionnez\n"
-#~ "« SMB/Windows 95/98/NT »."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Veuillez mettre votre imprimante sous tension si vous désirez que DrakX "
-#~ "la\n"
-#~ "détecte.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nom de l'imprimante : la file d'impression utilise « lp » comme nom\n"
-#~ "d'imprimante par défaut.\n"
-#~ "     Si vous possédez une seule imprimante, vous pouvez lui attribuer "
-#~ "plusieurs\n"
-#~ "noms. Vous devez néanmoins les séparer par un « | ». Si vous désirez "
-#~ "utiliser\n"
-#~ "un nom plus significatif, vous devez le mettre en premier (comme ceci "
-#~ "« mon\n"
-#~ "imprimante|lp », par exemple).\n"
-#~ "L'imprimante ayant « lp » dans son/ses nom(s) sera l'imprimante par "
-#~ "défaut.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description : ce champ est optionnel mais il peut être utile si "
-#~ "plusieurs\n"
-#~ "imprimantes sont connectées à votre ordinateur ou si vous désirez "
-#~ "autoriser\n"
-#~ "d'autres ordinateurs à accéder à votre imprimante.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Localisation : si vous désirez indiquer des informations sur "
-#~ "l'endroit où\n"
-#~ "votre imprimante est située, entrez les ici (vous êtes libre d'écrire ce "
-#~ "que\n"
-#~ "vous désirez (« 2° étage », par exemple).\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Vous devez indiquer quelques informations ici.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nom de la file d'impression : la file d'impression utilise « lp » "
-#~ "comme\n"
-#~ "nom d'imprimante par défaut. Par conséquent, si vous avez besoin d'une\n"
-#~ "ainsi dénommée. Si vous possédez une seule imprimante, vous pouvez lui\n"
-#~ "attribuer plusieurs noms. Vous devez néanmoins les séparer par un « | ».\n"
-#~ "Si vous préférez utiliser un nom plus significatif vous devez le mettre "
-#~ "en\n"
-#~ "premier (par exemple, comme ceci : « Mon imprimante|lp ». L'imprimante "
-#~ "ayant\n"
-#~ "« lp » dans son nom sera l'imprimante par défaut.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Répertoire de la file d'impression : les impressions en attente "
-#~ "sont\n"
-#~ "stockées dans ce répertoire. Conservez le choix par défaut si vous ne "
-#~ "savez\n"
-#~ "pas ce que vous devez utiliser.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Connexion de l'imprimante : si votre imprimante est physiquement "
-#~ "connectée\n"
-#~ "à votre ordinateur, sélectionnez « Imprimante locale ». Si vous désirez "
-#~ "utiliser\n"
-#~ "une imprimante connectée à une machine Unix distante, sélectionnez "
-#~ "« Imprimante\n"
-#~ "lpd distante ».\n"
-#~ "\n"
-#~ "\n"
-#~ "     Si vous désirez imprimer sur une imprimante connectée à une machine "
-#~ "distante\n"
-#~ "utilisant Microsoft Windows (ou à une machine Unix utilisant le protocol "
-#~ "SMB,\n"
-#~ "sélectionnez « SMB/Windows 95/98/NT ».\n"
-#~ "\n"
-#~ "\n"
-#~ "     Si vuos désirez accéder à une imprimante accessible via un réseau "
-#~ "NetWare,\n"
-#~ "sélectionnez NetWare.\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Votre imprimante n'a pas été détectée. Veuillez entrer le nom du "
-#~ "périphérique\n"
-#~ "sur lequel elle est branchée.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pour information, la plupart des imprimantes sont connectées sur le "
-#~ "premier\n"
-#~ "port parallèle. Ce dernier est appelé « /dev/lp0 » sous GNU-Linux et "
-#~ "« LPT 1 »\n"
-#~ "sous Microsoft Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr ""
-#~ "Vous pouvez maintenant sélectionner votre imprimante dans la liste ci-"
-#~ "dessus."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Veuillez sélectionner les options appropriées à votre imprimante.\n"
-#~ "Veuillez vous référer à sa documentation si vous ne savez pas quoi "
-#~ "choisir ici.\n"
-#~ "\n"
-#~ "\n"
-#~ "Vous aurez la possibilité de tester votre configuration dans la prochaine "
-#~ "étape et vous pourrez la modifier si vous n'êtes pas satisfait du "
-#~ "résultat."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Vous devez maintenant choisir le mot de passe root de votre système\n"
-#~ "Mandrake Linux. Le mot de passe doit être entré deux fois afin d'être\n"
-#~ "certain qu'aucune faute de frappe ne vous empéchera de l'utiliser.\n"
-#~ "\n"
-#~ "\n"
-#~ "L'utilisateur « root » est l'administrateur du système. Il est le seul\n"
-#~ "autorisé à modifier la configuration du système. Par conséquent, "
-#~ "choisissez\n"
-#~ "ce mot de passe avec soin. Une utilisation non autorisée du compte root "
-#~ "peut\n"
-#~ "être très dangereuse pour l'intégrité du système et des données qu'il "
-#~ "héberge,\n"
-#~ "ainsi que pour les autres machines qui sont connectées au système. Dans "
-#~ "l'idéal,\n"
-#~ "le mot de passe devrait être un mélange de majuscules, de minuscules et "
-#~ "de\n"
-#~ "chiffres. Le tout devrait avoir au moins huit (8) caractères de long. Il "
-#~ "ne\n"
-#~ "doit JAMAIS être écrit sur un quelconque bout de papier. Pour autant, ne "
-#~ "le\n"
-#~ "choisissez pas trop long ou trop compliqué : vous devez être capable de "
-#~ "vous\n"
-#~ "en souvenir sans trop d'effort."
-
-#~ msgid ""
-#~ "If your network uses LDAP (or NIS) protocol for authentication, select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "Si votre réseau utilise LDAP (ou NIS) comme protocole pour\n"
-#~ "l'authentification, sélectionnez « LDAP » (ou « NIS ») comme\n"
-#~ "authentification. Si vous ne savez pas, consultez votre\n"
-#~ "administrateur réseau.\n"
-#~ "\n"
-#~ "Si votre ordinateur n'est connecté à aucun réseau administré,\n"
-#~ "vous devriez choisir « Fichiers locaux » pour authentification."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Vous avez maintenant la possibilité de créer un ou plusieurs comptes\n"
-#~ "utilisateurs non privilégiés (à opposer à l'utilisateur « privilégié »,\n"
-#~ "root). Vous pouvez créer un ou plusieurs comptes pour chaque personne "
-#~ "que\n"
-#~ "vous désirez autoriser à utiliser le système. Veuillez noter que chaque\n"
-#~ "compte aura ses propres préférences (environnement graphique, "
-#~ "préférences\n"
-#~ "des applications, etc.) ainsi que son répertoire personnel (« home »), "
-#~ "dans\n"
-#~ "lequel seront stockées ces préférences.\n"
-#~ "\n"
-#~ "\n"
-#~ "Avant tout, créez un compte pour vous-même. Même si vous êtes le seul\n"
-#~ "utilisateur de cet ordinateur, vous NE DEVEZ PAS vous connecter en tant\n"
-#~ "que root pour une utilisation du système au quotidien. Cela représente "
-#~ "un\n"
-#~ "gros risque pour la sécurité. Rendre le système inutilisable tient à "
-#~ "aussi\n"
-#~ "peu de choses qu'une faute de frappe. Par conséquent, vous devriez "
-#~ "toujours\n"
-#~ "vous connecter au système en utilisant le compte que vous aurez créé ici "
-#~ "et\n"
-#~ "n'utiliser le compte de l'administrateur système que pour effectuer des "
-#~ "tâches\n"
-#~ "d'administration et de maintenance du système."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Il vous est fortement recommandé de créer une disquette de démarrage. Si "
-#~ "vous\n"
-#~ "ne pouvez pas démarrer votre ordinateur, il s'agit du seul moyen à votre\n"
-#~ "disposition pour réparer votre système sans avoir à le réinstaller."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Les principales options de LILO et Grub sont :\n"
-#~ "\n"
-#~ "  - Périphérique de démarrage : indique le nom du périphérique (ex : une\n"
-#~ "partition de disque dur) qui contient le secteur de démarrage. À moins "
-#~ "que\n"
-#~ "vous ne sachiez ce que vous faites, choisissez « /dev/hda ».\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Délai avant le démarrage de l'image par défaut : indique la durée\n"
-#~ "(en dixièmes de secondes) pendant laquelle le chargeur de démarrage "
-#~ "attend\n"
-#~ "avant de démarrer le système d'exploitation par défaut. Ceci est utilisé "
-#~ "sur\n"
-#~ "les systèmes qui démarrent immédiatement sur le disque dur après avoir "
-#~ "activé\n"
-#~ "le clavier. Si « delay » est absent, ou si sa valeur est nulle, le "
-#~ "chargeur\n"
-#~ "de démarrage n'attend pas.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Mode vidéo : ceci précise le mode texte VGA à utiliser pendant le\n"
-#~ "démarrage. Les valeurs suivantes sont disponibles :\n"
-#~ "    * normal   : utilise le mode texte normal de 80x25.\n"
-#~ "    * <nombre> : utilise le mode texte correspondant.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Purger « /tmp » à chaque démarrage : choisissez cette option si vous "
-#~ "désirez\n"
-#~ "éffacer tous les fichiers et répertoires sous « /tmp » à chaque démarrage "
-#~ "du système.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Préciser la quantité de RAM si nécessaire : il n'existe pas "
-#~ "actuellement\n"
-#~ "pas de méthode standard pour détecter la quantité de mémoire présente "
-#~ "dans\n"
-#~ "les ordinateurs de type PC. Par conséquent, il se peut que GNU-Linux ne "
-#~ "détecte\n"
-#~ "pas correctement la quantité présente dans votre machine. Si tel est le "
-#~ "cas,\n"
-#~ "vous pouvez spécifier la quantité correcte de RAM ici. Veuillez noter "
-#~ "qu'une\n"
-#~ "différence de 2 à 4 Mo est normale."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO est un chargeur de démarrage pour SPARC: il est\n"
-#~ "capables de démarrer GNU-Linux ou tout autre système d'exploitation "
-#~ "présent\n"
-#~ "sur votre ordinateur. La plupart du temps, ces autres systèmes\n"
-#~ "d'exploitation sont correctement détectés et installés. Si tel n'est pas\n"
-#~ "le cas, vous avez maintenant la possibilité d'indiquer les paramètres\n"
-#~ "requis. Faîtes attention à l'exactitude des paramètres.\n"
-#~ "\n"
-#~ "\n"
-#~ "Vous pouvez également souhaiter que tout un chacun ne puisse pas "
-#~ "démarrer\n"
-#~ "ces systèmes d'exploitation. Si tel est le cas vous pouvez supprimer les\n"
-#~ "entrées correspondantes. Veuillez noter que vous aurez alors besoin "
-#~ "d'une\n"
-#~ "disquette de démmarage appropriée pour démarrer les systèmes "
-#~ "d'exploitation\n"
-#~ "dont vous aurez supprimé les entrées."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Les principales options de SILO sont :\n"
-#~ "\n"
-#~ "  - Installation du chargeur de démarrage : Indique où vous désirez\n"
-#~ "placer l'information requise au démarrage de GNU-Linux. À moins que vous\n"
-#~ "ne sachiez exactement ce que vous faites, choisissez toujours\n"
-#~ "« Premier secteur du disque (MBR) ».\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Délai avant le démarrage de l'image par défaut : indique la durée "
-#~ "(en\n"
-#~ "dixièmes de secondes) pendant laquelle le chargeur de démarrage attend "
-#~ "avant\n"
-#~ "de démarrer le système d'exploitation par défaut. Ceci est utilisé sur "
-#~ "les\n"
-#~ "systèmes qui démarrent immédiatement sur le disque dur après avoir activé "
-#~ "le\n"
-#~ "clavier. Si « delay » est absent, ou si sa valeur est nulle, le chargeur "
-#~ "de\n"
-#~ "démarrage n'attend pas."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Il est maintenant temps de configurer X, le coeur de l'interface "
-#~ "graphique de\n"
-#~ "GNU-Linux. Pour ce, vous devez configurer votre carte vidéo et votre "
-#~ "moniteur.\n"
-#~ "La plupart de ces étapes étant automatisées, votre travail pourrait donc "
-#~ "se\n"
-#~ "limiter à vérifier ce qui a été fait et accepter les réglages.\n"
-#~ "\n"
-#~ "\n"
-#~ "Une fois la configuration achevée, X sera démarré (sauf si vous demandez "
-#~ "à\n"
-#~ "DrakX de ne pas le faire) afin que vous puissiez vérifier si les "
-#~ "réglages\n"
-#~ "sont corrects. Si ce n'est pas le cas, vous aurez la possibilité de les\n"
-#~ "modifier, ce autant de fois qu'il vous le désirerez."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Si vous n'êtes pas satisfait par la configuration de X, vous pouvez "
-#~ "utiliser\n"
-#~ "ces options pour configurer correctement le système X Window."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Si vous désirez pouvoir vous connecter en mode graphique, sélectionnez "
-#~ "« Oui ».\n"
-#~ "Dans le cas contraire, sélectionnez « Non »."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Vous pouvez choisir un niveau de sécurité pour votre système. Veuillez "
-#~ "vous réferer au\n"
-#~ "manuel pour de plus amples informations. En résumé, si vous ne savez pas "
-#~ "quoi choisir,\n"
-#~ "gardez le choix par défaut.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Votre système va maintenant redémarrer.\n"
-#~ "\n"
-#~ "Après le redémarrage, votre nouveau système Mandrake Linux sera\n"
-#~ "automatiquement activé. Si vous souhaitez démarrer un autre système\n"
-#~ "d'exploitation, veuillez lire les informations qui s'afficheront à\n"
-#~ "l'écran."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Tchèque (programmeurs)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovaque (programmeurs)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Nom du profil à créer"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Écrire /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "Restaurer à partir d'un fichier"
-
-#~ msgid "Save in file"
-#~ msgstr "Sauvegarder dans un fichier"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Restaurer à partir d'une disquette"
-
-#~ msgid "Format all"
-#~ msgstr "Tout formater"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Après avoir formaté toutes les partitions,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "toutes les données présentes sur ces partitions seront perdues"
-
-#~ msgid "Reload"
-#~ msgstr "Recharger"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Désirez-vous créer une disquette vous permettant d'installer "
-#~ "automatiquement\n"
-#~ "une réplication de cette installation ?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Configuration ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Si vous utilisez un serveur CUPS distant, vous n'avez pas besoin\n"
-#~ "de configurer d'imprimante ici. Elles seront automatiquement\n"
-#~ "détectées à moins que le serveur soit sur un réseau différent;\n"
-#~ "dans ce dernier cas, vous devez indiquer l'adresse IP du serveur\n"
-#~ "CUPS et éventuellement le numéro de port."
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "Entrez le nom de l'imprimante et les commentaires"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Nom de la file distante manquant!"
-
-#~ msgid "Pipe into command"
-#~ msgstr "Reconduire sur une commande"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "Ici vous pouvez spécifier n'importe quelle commande sur laquelle le "
-#~ "travail peut être reconduit plutôt que d'être envoyé directement à une "
-#~ "imprimante."
-
-#~ msgid "Command line"
-#~ msgstr "Ligne de commande"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "Une ligne de commande doit être entrée!"
-
-#~ msgid "Modify printer"
-#~ msgstr "Modifier l'imprimante"
-
-#~ msgid "start it"
-#~ msgstr "lancer"
-
-#~ msgid "stop it"
-#~ msgstr "arrêter"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Surveillance du réseau"
-
-#~ msgid "Settings"
-#~ msgstr "Paramètres"
-
-#~ msgid "Profile "
-#~ msgstr "Profil "
-
-#~ msgid "Statistics"
-#~ msgstr "Statistiques"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Vitesse d'envoi :"
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Vitesse de réception :"
-
-#~ msgid "Connection Time: "
-#~ msgstr "Durée de connexion :"
-
-#~ msgid "Logs"
-#~ msgstr "Logs"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Connexion à Internet..."
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Déconnexion d'Internet..."
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "La déconnexion d'Internet a échoué."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Déconnexion d'Internet effectuée."
-
-#~ msgid "Connection complete."
-#~ msgstr "Connexion effectuée."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "La connexion a échoué.\n"
-#~ "Veuillez vérifier votre configuration dans le Centre de Contrôle Mandrake."
-
-#~ msgid "Color configuration"
-#~ msgstr "Configuration des couleurs"
-
-#~ msgid "sent: "
-#~ msgstr "envoyé : "
-
-#~ msgid "received: "
-#~ msgstr "reçu : "
-
-#~ msgid "average"
-#~ msgstr "moyenne"
-
-#~ msgid "Connect"
-#~ msgstr "Se connecter"
-
-#~ msgid "Disconnect"
-#~ msgstr "Se déconnecter"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Vous pouvez maintenant tester votre souris. Utilisez les boutons et la "
-#~ "molette\n"
-#~ "pour vérifier qu'elle est correctement paramétrée. Si tel n'est pas le "
-#~ "cas,\n"
-#~ "vous pouvez cliquer (ou actionner à l'aide du clavier) le bouton "
-#~ "« Annuler »\n"
-#~ "pour choisir un autre pilote."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Connexion par ADSL"
-
-#~ msgid "Choose"
-#~ msgstr "Choississez"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Vous pouvez indiquer directement l'URI pour accéder à l'imprimante avec "
-#~ "CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Oui, imprimer la page de test ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Oui, imprimer la page de test PostScript"
-
-#~ msgid "Yes, print both test pages"
-#~ msgstr "Oui, imprimer les deux pages de test"
-
-#~ msgid "Paper Size"
-#~ msgstr "Taille du papier"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Éjecter la page après chaque impression ?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Options pour le pilote Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Nombre de couleurs"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Imprimer le texte en tant que PostScript ?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Corriger l'effet d'escalier ?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Nombre de pages par feuille"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Taille des marges gauche et droite (en 1/72e de pouce)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Taille des marges haut et bas (en 1/72e de pouce)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Options supplémentaires pour GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Options supplémentaires pour le mode texte"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Inverser l'odre des pages"
-
-#~ msgid "CUPS starting"
-#~ msgstr "Démarrage de CUPS"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Sélectionnez la connexion de l'imprimante distante"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected.\n"
-#~ "In case of doubt, select \"Remote CUPS server\"."
-#~ msgstr ""
-#~ "Si vous utilisez un serveur CUPS distant, vous n'avez pas besoin\n"
-#~ "de configurer d'imprimante ici. Elles seront automatiquement\n"
-#~ "détectées. Si vous hésitez, sélectionnez « Serveur CUPS distant »."
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Chaque file d'impression (file à laquelle sont envoyés les travaux \n"
-#~ "d'impression) a besoin d'un nom associé (en général, « lp »).\n"
-#~ "D'autres paramètres tels la description de l'imprimante ou sa "
-#~ "localisation\n"
-#~ "peuvent être définis.\n"
-#~ "\n"
-#~ "Quel nom doit être utilisé pour cette imprimante et comment est-ell "
-#~ "connectée ?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Chaque file d'impression (file à laquelle sont envoyés les travaux \n"
-#~ "d'impression) a besoin d'un nom associé (en général, « lp ») ainsi\n"
-#~ "qu'un répertoire de spool associé. Veuillez indiquer les nom et\n"
-#~ "répertoire de spool que vous souhaitez utiliser pour cette file,\n"
-#~ "ainsi que le type de connexion de votre imprimante."
-
-#~ msgid "Name of queue"
-#~ msgstr "Nom de la file"
-
-#~ msgid "Spool directory"
-#~ msgstr "Répertoire de spool"
-
-#~ msgid "Disable"
-#~ msgstr "Désactiver"
-
-#~ msgid "Enable"
-#~ msgstr "Activer"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2"
-
-#~ msgid "fsck failed: "
-#~ msgstr "La vérfication du système de fichier a échoué : "
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Pour pouvoir bénéficier d'un système plus sécurisé, activez les options\n"
-#~ "« Utiliser les shadows passwords » et « Utiliser les mots de passe MD5 »."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Si le réseau auquel vous êtes raccordé utilise le protocole NIS, "
-#~ "sélectionnez\n"
-#~ "« Utiliser NIS ». Si vous ne savez pas si vous devez utiliser ce "
-#~ "protocole,\n"
-#~ "consultez votre administrateur réseau."
-
-#~ msgid "yellow pages"
-#~ msgstr "Yellow Pages"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Comment désirez-vous vous connecter à Internet ?"
-
-#~ msgid "cannot fork: "
-#~ msgstr "fork a échoué :"
-
-#~ msgid "Configure..."
-#~ msgstr "Configurer..."
-
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "Configuration de Lilo/Grub"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Taille sélectionnée %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Démarrage de votre connexion..."
-
-#~ msgid "Standard tools"
-#~ msgstr "Outils standard"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr ""
-#~ "Ce script tente de charger les modules utilisés par votre souris USB."
-
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Configuration de Lilo/Grub: ajouter un emplacement"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Maintenant que votre connextion à Internet est configurée, votre "
-#~ "ordinateur\n"
-#~ "peut être paramétré afin de partager cette dernière.\n"
-#~ "\n"
-#~ "Veuillez noter que vous avez besoin d'une carte réseau pour paramétrer "
-#~ "votre\n"
-#~ "réseau local.\n"
-#~ "\n"
-#~ "Désirez-vous configurer le partage de la connexion Internet ?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Gestion automatique des dépendances"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Configuration de LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Créer une disquette de démarrage"
-
-#~ msgid "Format floppy"
-#~ msgstr "Formater la disquette"
-
-#~ msgid "Choice"
-#~ msgstr "Choix"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Vous pouvez maintenant sélectionner diverses options :\n"
-#~ "\n"
-#~ "  - Utiliser les optimisations pour les disques durs : cette option peut\n"
-#~ "    améliorer les performances de votre disque dur, mais elle est "
-#~ "réservée\n"
-#~ "    aux utilisateurs confirmés. Quelques circuits de cartes mères bogués\n"
-#~ "    peuvent détruire vos données. Par conséquent, n'activez cette option "
-#~ "que\n"
-#~ "    si vous êtes certain qu'il n'y aura pas de problèmes avec votre "
-#~ "matériel.\n"
-#~ "    Veuillez noter que bien que le noyau possède une liste noire des "
-#~ "disques\n"
-#~ "    durs et circuits à problèmes, il est prudent de laisser cette option\n"
-#~ "    désactivée si vous désirez éviter les mauvaises surprises.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Niveau de sécurité : vous pouvez choisir le niveau de sécurité pour\n"
-#~ "    votre système. Veuillez vous référer au manuel d'utilisation pour "
-#~ "des\n"
-#~ "    explications complètes. Pour un bon compromis entre sécurité et "
-#~ "confort\n"
-#~ "    d'utilisation, choisissez « Moyen ». Si vous désirez une machine "
-#~ "vraiment\n"
-#~ "    sécurisée, choisissez « Paranoïaque ». Veuillez noter que ce niveau "
-#~ "de\n"
-#~ "    sécurité interdit toute connexion à la console en tant "
-#~ "qu'administrateur\n"
-#~ "    système (root). Si vous désirez utiliser ce compte, vous devrez vous\n"
-#~ "    connecter en tant qu'utilisateur puis utiliser la commande  « su ». "
-#~ "Cette\n"
-#~ "    option ne devrait être sélectionnée que si vous destinez cette "
-#~ "machine à\n"
-#~ "    une utilisation de type serveur.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Préciser la quantité de RAM si nécessaire : il n'existe pas "
-#~ "actuellement\n"
-#~ "    pas de méthode standard pour détecter la quantité de mémoire présente "
-#~ "dans\n"
-#~ "    les ordinateurs de type PC. Par conséquent, il se peut que GNU-Linux "
-#~ "ne détecte\n"
-#~ "    pas correctement la quantité présente dans votre machine. Si tel est "
-#~ "le cas,\n"
-#~ "    vous pouvez spécifier la quantité correcte de RAM ici. Veuillez noter "
-#~ "qu'une\n"
-#~ "    différence de 2 à 4 Mo est normale.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Montage automatique des périphériques amovibles : si vous désirez ne "
-#~ "pas\n"
-#~ "    avoir à monter manuellement les périphériques amovibles (CD-ROM, "
-#~ "ZIP,\n"
-#~ "    disquettes) en utilisant les commandes « mount » et « umount », "
-#~ "activez\n"
-#~ "    cette option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - NumLock au démarrage : si vous souhaitez que le pavé numérique soit "
-#~ "activé\n"
-#~ "    au moment du démarrage, sélectionnez cette option. Veuillez noter que "
-#~ "cela\n"
-#~ "    peut ne pas fonctionner avec le système X Window."
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Divers"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Questions diverses"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Supermount n'est pas compatible avec un haut niveau de sécurité"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Attention ! DANS CE NIVEAU DE SÉCURITÉ, LA CONNEXION EN TANT QUE ROOT SUR "
-#~ "LA\n"
-#~ "CONSOLE N'EST PAS AUTORISÉE. Si vous désirez être root, vous devrez vous\n"
-#~ "connecter en tant que simple utilisateur puis utiliser la commande "
-#~ "« su ».\n"
-#~ "\n"
-#~ "D'une façon plus générale, n'espérez pas pouvoir utiliser votre machine "
-#~ "pour\n"
-#~ "autre chose qu'un serveur.\n"
-#~ "Vous aurez été prévenu."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Soyez prudent. Avoir la touche NumLock activée peut causer de nombreux\n"
-#~ "problèmes : des chiffres peuvent être affichés à la place de lettres "
-#~ "normales\n"
-#~ "(appuyer sur la touche « p » peut provoquer l'affichage d'un « 6 »."
-
-#~ msgid "Scientific applications"
-#~ msgstr "Applications scientifiques"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Premier serveur de noms (DNS)"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Deuxième serveur de noms (DNS)"
-
-#~ msgid "using module"
-#~ msgstr "module noyau"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Quel chargeur de démarrage voulez-vous utiliser ?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Disquette auto-installation"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Essayer d'identifier un modem ?"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Désactiver la connexion à Internet"
-
-#~ msgid "Configure local network"
-#~ msgstr "Configurer le réseau local"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Configurer la connexion à Internet / Configurer le réseau local"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Le réseau local a déjà été configuré.\n"
-#~ "\n"
-#~ "Désirez-vous :"
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Graphisme"
-
-#~ msgid "Multimedia"
-#~ msgstr "Multimédia"
-
-#~ msgid "Sciences"
-#~ msgstr "Sciences"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Programmes de discussion en ligne (IRC ou messagerie instantanée) comme "
-#~ "xchat, licq, gaim, et outils de transfert de fichiers"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Outils de Communication"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Outils pour utiliser Internet"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Clients et serveurs de bases de données"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Développement - C/C++"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Configuration de l'horloge"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(peut provoquer des pertes de données)"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "Utiliser les optimisations pour le disque dur ?"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Activer le pavé numérique au démarrage"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Confirmation du mot de passe"
-
-#~ msgid "default"
-#~ msgstr "défaut"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "À quel usage destinez-vous votre ordinateur ?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Choisissez la taille que vous désirez installer"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Utiliser DiskDrake"
-
-#~ msgid "Customized"
-#~ msgstr "Personnalisée"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Êtes-vous certain d'être un expert ?\n"
-#~ "Vous serez autorisé à faire des choses puissantes mais dangeureuses.\n"
-#~ "\n"
-#~ "Des questions telles « Utiliser les fichiers shadow pour les mots de "
-#~ "passe ? »\n"
-#~ "vous seront posées. Êtes-vous prêts à répondre à ce genre de questions ?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Utiliser un fichier shadow"
-
-#~ msgid "shadow"
-#~ msgstr "shadow"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Utiliser les mots de passe MD5"
-
-#~ msgid "Search"
-#~ msgstr "Rechercher"
-
-#~ msgid "Package"
-#~ msgstr "Paquetage"
-
-#~ msgid "Text"
-#~ msgstr "Texte"
-
-#~ msgid "Tree"
-#~ msgstr "Arborescence"
-
-#~ msgid "Sort by"
-#~ msgstr "Trier par"
-
-#~ msgid "Category"
-#~ msgstr "Catégorie"
-
-#~ msgid "See"
-#~ msgstr "Visualiser"
-
-#~ msgid "Installed packages"
-#~ msgstr "Paquetages installés"
-
-#~ msgid "Available packages"
-#~ msgstr "Paquetages disponibles"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Afficher uniquement les feuilles"
-
-#~ msgid "Expand all"
-#~ msgstr "Tout développer"
-
-#~ msgid "Collapse all"
-#~ msgstr "Tout réduire"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Ajouter un emplacement de paquetages"
-
-#~ msgid "Update location"
-#~ msgstr "Mettre à jour l'emplacement"
-
-#~ msgid "Remove"
-#~ msgstr "Supprimer"
-
-#~ msgid "Find Package"
-#~ msgstr "Rechercher un paquetage"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Rechercher les paquetages contenant le fichier"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Basculer d'Installés vers Disponibles"
-
-#~ msgid "Choose package to install"
-#~ msgstr "Choix du paquetage à installer"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Vérification des dépendances"
-
-#~ msgid "Wait"
-#~ msgstr "Patientez"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Les paquetages suivants seront désinstallés"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "Désinstallation des paquetages"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Quels paquetages rechercher"
-
-#~ msgid "%s not found"
-#~ msgstr "%s non trouvé(s)."
-
-#~ msgid "No match"
-#~ msgstr "Pas d'occurence correspondante"
-
-#~ msgid "No more match"
-#~ msgstr "Plus d'occurence correspondante"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "Rpmdrake fonctionne en mode « Faible utilisation de la mémoire ».\n"
-#~ "Il va être redémarré pour pouvoir rechercher les fichiers."
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Quel fichier recherchez-vous ?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Que recherchez-vous ?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Veuillez donner un nom (tel « extra », « commercial »)"
-
-#~ msgid "Directory"
-#~ msgstr "Répertoire"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Aucun CDROM n'est disponible (rien dans /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "L'URL du répertoire contient les RPM"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Pour les protocoles FTP et HTTP, vous devez indiquer l'endroit où se "
-#~ "trouve\n"
-#~ "hdlist. Cette localisation doit correspondre à l'URL"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Veuillez préciser l'information suivante"
-
-# c-format
-#~ msgid "%s is already in use"
-#~ msgstr "%s est déjà utilisé"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Mise à jour de la base des RPM"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "%s va être supprimé"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Recherche des dépendances non satisfaites"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr ""
-#~ "La recherche des dépendances non satisfaites peut prendre un certain temps"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Une carte RNIS/ISDN a été identifiée :\n"
-
-#~ msgid "France"
-#~ msgstr "France"
-
-#~ msgid "Other countries"
-#~ msgstr "Autres pays"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "Dans quel pays résidez-vous ?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Modem Alcatel"
-
-#~ msgid "ECI modem"
-#~ msgstr "Modem ECI"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "Si votre modem est un modem Alcatel, choisissez Alcatel. Dans le cas "
-#~ "contraire, choisissez ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "ne pas utiliser pppoe"
-
-#~ msgid "mandatory"
-#~ msgstr "obligatoire"
-
-#~ msgid "interesting"
-#~ msgstr "intéressant"
-
-#~ msgid "i18n (important)"
-#~ msgstr "internationalisation (important)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "internationalisation (très utile)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "internationalisation (utile)"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, bibliothèques, outils"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Sur quel port série votre souris est-elle connectée ?"
-
-#~ msgid "Czech"
-#~ msgstr "Tchèque"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovaque"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "Impossible d'installe le RPM d'ipchains en utilisant urpmi"
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "Impossible d'installer le RPM de dhcp en utilisant urpmi"
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "Impossible d'installer le RPM de linuxconf en utilisant urpmi"
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "Impossible d'installer le RPM de bind en utilitsant urpmi"
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr ""
-#~ "Impossible d'installer le RPM de caching-namerserver en utilisant urpmi"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Reconfigurer le réseau local"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Votre ordinateur peut être configuré afin de partager la connexion "
-#~ "Internet.\n"
-#~ "\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "Tout a été installé.\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Connexion à Internet en utilisant un modem normal"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Connexion à Internet en utilisant ISDN/RNIS"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Se connecter à Internet en utilisant le protocole DSL (ou ADSL)"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Se connecter à Internet en utilisant le cable"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "Temps (en secondes) d'inactivité après\n"
-#~ "lequel la connexion sera interrompue\n"
-#~ "(ne rien indiquer pour désactiver cette\n"
-#~ "fonctionnalité)"
-
-#~ msgid "Germany"
-#~ msgstr "Allemangne"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Allemangne (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Que désirez-vous faire ?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Installation/Mise à jour"
-
-#~ msgid "Rescue"
-#~ msgstr "Mise à jour"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Quel type de système de fichiers désirez-vous utiliser ?"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Choisissez « Installation » si vous n'avez jamais installé de système GNU/"
-#~ "Linux sur cet ordinateur ou si vous voulez en installer plusieurs sur "
-#~ "cette machine.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choisissez « Mise à jour » si vous souhaitez mettre à jour un système "
-#~ "Mandrake Linux précédemment installée.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choisissez :\n"
-#~ "\n"
-#~ "  - Recommandée : si vous n'avez jamais installé de système GNU-Linux, "
-#~ "choisissez cette option.\n"
-#~ "\n"
-#~ "  - Personnalisée : si vous connaissez déja GNU-Linux, vous pouvez "
-#~ "choisir quelle sera l'utilisation principale de cette machine. Voyez ci-"
-#~ "après pour plus de détails.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert : si vous connaissez déja tout de GNU-Linux et que vous voulez "
-#~ "conserver l'entière maîtrise de l'installation, cette classe est faite "
-#~ "pour vous. Vous pourrez sélectionner le type d'utilisation du système de "
-#~ "la même manière que pour l'installation personnalisée.\n"
-#~ "Attention : l'utilisation de cette classe d'installation nécessite une "
-#~ "bonne connaissance de GNU-Linux. Ne l'utilisez donc pas à moins de savoir "
-#~ "ce que vous faîtes.\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "Vous pouvez maintenant choisir sur quelle(s) partition(s) vous désirez\n"
-#~ "installer votre système Mandrake Linux. Si vous aviez auparavant créé "
-#~ "des\n"
-#~ "partitions (lors d'une précédente installation ou à l'aide d'un autre "
-#~ "outil\n"
-#~ "de partionnement), vous pouvez les utiliser. Dans le cas contraire, vous\n"
-#~ "devez partitionner votre (vos) disque(s) dur(s). Cette étape revient à «\n"
-#~ "découper » votre disque en plusieurs zones distinctes.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si vous devez créer de nouvelles partitions, utilisez « Partitionnement\n"
-#~ "automatique ». Vous pouvez sélectionner le disque à partitionner en "
-#~ "cliquant\n"
-#~ "sur « hda » pour le premier disque IDE, « hdb » pour le deuxième ou "
-#~ "« sda »\n"
-#~ "pour le premier disque SCSI (et ainsi de suite).\n"
-#~ "\n"
-#~ "\n"
-#~ "Deux partitions courantes sont : la partition racine (« / »), qui est le\n"
-#~ "point de départ de toute l'arborescence du système de fichiers, et aussi\n"
-#~ "« /boot », qui contient tous les fichiers nécessaires au démarrage du\n"
-#~ "système d'exploitation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Le partitionnement étant un processus irréversible, partitionner peut "
-#~ "s'avérer\n"
-#~ "intimidant et stressant aux yeux d'un utilisateur non expérimenté. "
-#~ "DiskDrake\n"
-#~ "simplifie ce processus pour que cela ne soit pas le cas. Consultez la\n"
-#~ "documentation et prenez votre temps avant de commencer.\n"
-#~ "\n"
-#~ "\n"
-#~ "Vous pouvez utiliser des raccourcis clavier : sélectionner les "
-#~ "partitions\n"
-#~ "peut se faire avec la touche TAB ou les flèches haut et bas. Quand une\n"
-#~ "partition est sélectionnée, vous pouvez utiliser :\n"
-#~ "\n"
-#~ " - Ctrl-c pour créer une nouvelle partition (quand une zone vide est\n"
-#~ "   sélectionnée),\n"
-#~ "\n"
-#~ " - Ctrl-d pour effacer une partition,\n"
-#~ "\n"
-#~ " - Ctrl-m pour sélectionner le point de montage.\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Les partitions nouvellement créées doivent être maintenant formatées "
-#~ "pour\n"
-#~ "que le système puisse les utiliser. Outre les nouvelles partitions, vous\n"
-#~ "pouvez également formater des partitions préalablement créées et "
-#~ "utilisées\n"
-#~ "si vous désirez supprimer toutes les données qu'elles contiennent.\n"
-#~ "\n"
-#~ "\n"
-#~ "Veuillez noter qu'il n'est pas nécessaire de formater les partitions\n"
-#~ "préalablement créées et utilisées si elles contiennent des données\n"
-#~ "auxquelles vous tenez (cas typiques : /home et /usr/local)."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Les paquetages sélectionnés sont à présent installés sur votre système.\n"
-#~ "Cette opération ne devrait prendre que quelques minutes à moins que vous\n"
-#~ "n'ayez choisi de mettre à jour un système existant. Dans ce cas, cela "
-#~ "peut\n"
-#~ "prendre plus de temps avant même que la mise à jour ne commence vraiment."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Si DrakX n'a pas pu trouver votre souris, ou si vous voulez vérifier ce "
-#~ "qu'il\n"
-#~ "a fait, une liste de souris vous sera présentée.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si vous êtes d'accord avec DrakX, vous pouvez vous rendre à l'étape que "
-#~ "vous\n"
-#~ "souhaitez en la sélectionnant dans la liste situé sur la gauche de votre "
-#~ "écran.\n"
-#~ "Dans le cas contraire, choisissez le modèle de souris que vous pensez "
-#~ "être le\n"
-#~ "plus proche de celle que vous possédez.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si votre souris est connecté à un port série, vous devrez également "
-#~ "indiquer\n"
-#~ "sur quel port série elle est connectée."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Cette section est dédiée à la configuration d'un réseau local, LAN\n"
-#~ "(Local Area Network) en anglais, ou d'une connexion par modem.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si vous choisissez « Réseau local », DrakX essaiera de trouver une\n"
-#~ "carte Ethernet sur votre machine. Les cartes PCI sont en principe\n"
-#~ "reconnues et installées automatiquement. Toutefois, si votre\n"
-#~ "périphérique est une carte ISA, l'autodétection ne fonctionnera pas.\n"
-#~ "Vous devrez alors choisir un pilote dans la liste qui apparaîtra.\n"
-#~ "\n"
-#~ "\n"
-#~ "De même que pour les adaptateurs SCSI, vous pouvez laissez le pilote\n"
-#~ "chercher son matériel. S'il échoue vous devrez lui spécifier les options\n"
-#~ "adéquates (options que vous aurez obtenues dans la documentation de "
-#~ "votre\n"
-#~ "matériel).\n"
-#~ "\n"
-#~ "\n"
-#~ "Si vous installez Mandrake Linux sur une machine faisant partie d'un "
-#~ "réseau\n"
-#~ "existant, l'administrateur réseau est en mesure de vous fournir les\n"
-#~ "informations nécessaires (adresse IP, masque de réseau et nom d'hôte).\n"
-#~ "Si vous mettez en place un réseau privé (par exemple à la maison), vous\n"
-#~ "devrez choisir ces adresses vous-même.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si vous n'avez besoin que d'une connexion par modem (par exemple pour "
-#~ "Internet),\n"
-#~ "choisissez « Connexion par modem ». DrakX essayera alors de détecter "
-#~ "votre modem. S'il échoue, vous devrez indiquer sur quel port il est "
-#~ "connecté."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "GNU/Linux peut manipuler plusieurs types d'imprimantes. Chacune d'entre "
-#~ "elles\n"
-#~ "requiert une configuration différente. Faîtes attention au fait que le\n"
-#~ "programme de gestion des imprimantes utilise « lp » comme nom "
-#~ "d'imprimante\n"
-#~ "par défaut. Par conséquent, aucune imprimante ne doit porter ce nom. "
-#~ "Vous\n"
-#~ "pouvez donner plusieurs noms à une même imprimante. Ils doivent être "
-#~ "séparés\n"
-#~ "par le caractère « | ». Ainsi, si vous désirez donner un nom plus parlant "
-#~ "à une\n"
-#~ "imprimante, vous devez le mettre en première position. Par exemple : \n"
-#~ "« Mon imprimante|lp ».\n"
-#~ "\n"
-#~ "\n"
-#~ "Si votre imprimante est physiquement connectée à votre machine, "
-#~ "sélectionnez\n"
-#~ "« Imprimante locale ». Vous devrez alors indiquer sur quel port elle est\n"
-#~ "connectée et sélectionner le filtre approprié.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si vous souhaitez accéder à une imprimante connectée à une machine Unix\n"
-#~ "distante, sélectionnez « Imprimante lpd distante ». Bien qu'aucun nom\n"
-#~ "d'utilisateur ou mot de passe ne soit requis, vous devez connaître le\n"
-#~ "de la file d'impression distante.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si vous souhaitez utiliser une imprimante SMB (i.e. une imprimante "
-#~ "desservie\n"
-#~ "par une machine distante fonctionnant avec Microsoft Windows 9x/NT) vous "
-#~ "devrez\n"
-#~ "spécifier le nom SMB de cette machine (qui n'est pas son nom TCP/IP) et, "
-#~ "si\n"
-#~ "possible, son adresse IP ainsi que les nom d'utilisateur, du groupe de "
-#~ "travail\n"
-#~ "et le mot de passe requis pour utiliser l'imprimante. Le nom de "
-#~ "l'imprimante\n"
-#~ "est également requis. Il en est de même pour une imprimante Netware, à "
-#~ "la\n"
-#~ "différence près que le nom du groupe de travail n'est pas nécessaire."
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "Il vous est fortement recommandé de répondre  « Oui ». Si vous installez\n"
-#~ "Microsoft Windows après avoir installé Mandrake Linux, ce dernier\n"
-#~ "effacera le secteur de démarage. Si vous n'avez pas créé de disquette de\n"
-#~ "démarrage, vous ne pourrez plus démarrez GNU/Linux sans le réinstaller."
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Veuillez utiliser votre roulette"
diff --git a/perl-install/share/po/ga.po b/perl-install/share/po/ga.po
deleted file mode 100644
index f7ffe8d86..000000000
--- a/perl-install/share/po/ga.po
+++ /dev/null
@@ -1,7367 +0,0 @@
-# Irish translations for DrakX, the Mandrake Installer.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Irish Linux Users Group <ilug@linux.ie>, 1999
-#
-# Credits where due:
-#   Proinnsias Breathnach <breatpro@dublin.ml.com-nospam>
-#   Donncha Ó'Caoimh <donncha.ocaoimh@tradesignals.com-nospam>
-#   Barra Ó'Caoimh <Care of donncha.ocaoimh@tradesignals.com-nospam>
-#   John McDonnell <johnmc@student.nuigalway.ie-nospam>
-#   Alastair McKinstry <mckinstry@computer.org>
-# Who've all contributed so far. 
-# Proinnsias 16-Dec-1999
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-06-02 17:16+0200\n"
-"PO-Revision-Date: 1999-12-16 10:33+0100\n"
-"Last-Translator: Proinnsias Breathnach <breatpro@dublin.ml.com>\n"
-"Language-Team: Gaeilge <ga@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Configure all heads independantly"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:233
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:236
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:239
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "ag leámh cumraíocht"
-
-#: ../../Xconfigurator.pm_.c:240
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Graphic card"
-msgstr "Carta Grafach"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Select a graphic card"
-msgstr "Roghnaigh carta grafachach"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "Choose a X server"
-msgstr "Roghnaigh freastalaí X"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "X server"
-msgstr "X freastalaí"
-
-#: ../../Xconfigurator.pm_.c:309 ../../Xconfigurator.pm_.c:316
-#: ../../Xconfigurator.pm_.c:366
-#, c-format
-msgid "XFree %s"
-msgstr "XFree86 %s"
-
-#: ../../Xconfigurator.pm_.c:312
-#, fuzzy
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Cén sort iontráil a suimigh do"
-
-#: ../../Xconfigurator.pm_.c:324
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:326 ../../Xconfigurator.pm_.c:359
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:328 ../../Xconfigurator.pm_.c:361
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:336 ../../Xconfigurator.pm_.c:350
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:338 ../../Xconfigurator.pm_.c:352
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:371
-msgid "XFree configuration"
-msgstr "Cumraíocht XFree"
-
-#: ../../Xconfigurator.pm_.c:416
-msgid "Select the memory size of your graphic card"
-msgstr "Roghnaigh an méid cuimhne atá id' charta grafachach"
-
-#: ../../Xconfigurator.pm_.c:463
-msgid "Choose options for server"
-msgstr "Roghnaigh cumraíocht an freastalaí"
-
-#: ../../Xconfigurator.pm_.c:480
-msgid "Choose a monitor"
-msgstr "Roghnaigh scáileán"
-
-#: ../../Xconfigurator.pm_.c:480
-msgid "Monitor"
-msgstr "Scáileán"
-
-#: ../../Xconfigurator.pm_.c:483
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:490
-msgid "Horizontal refresh rate"
-msgstr "Ráta athnuachana cothrománach"
-
-#: ../../Xconfigurator.pm_.c:491
-msgid "Vertical refresh rate"
-msgstr "Ráta athnuachana ingearach"
-
-#: ../../Xconfigurator.pm_.c:528
-msgid "Monitor not configured"
-msgstr "Níl aon scáileán cumraithe"
-
-#: ../../Xconfigurator.pm_.c:531
-msgid "Graphic card not configured yet"
-msgstr "Níl aon carta grafachach cumraithe"
-
-#: ../../Xconfigurator.pm_.c:534
-msgid "Resolutions not chosen yet"
-msgstr "Níl aoin réiteach cumraithe"
-
-#: ../../Xconfigurator.pm_.c:551
-msgid "Do you want to test the configuration?"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../Xconfigurator.pm_.c:555
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:558
-msgid "Test of the configuration"
-msgstr "Trialaigh an cumraíocht"
-
-#: ../../Xconfigurator.pm_.c:597
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"bain trial as roinnt paraiméadair a athrú"
-
-#: ../../Xconfigurator.pm_.c:597
-msgid "An error has occurred:"
-msgstr "Tharla Earráid:"
-
-#: ../../Xconfigurator.pm_.c:619
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Ag éalú i %d siocand"
-
-#: ../../Xconfigurator.pm_.c:630
-msgid "Is this the correct setting?"
-msgstr "An bhfuil seo ceart?"
-
-#: ../../Xconfigurator.pm_.c:638
-msgid "An error has occurred, try to change some parameters"
-msgstr "Tharla earráid, bain trial as roinnt paraiméadair a athrú"
-
-#: ../../Xconfigurator.pm_.c:684 ../../printerdrake.pm_.c:277
-#: ../../services.pm_.c:125
-msgid "Resolution"
-msgstr "Réiteach"
-
-#: ../../Xconfigurator.pm_.c:731
-msgid "Choose the resolution and the color depth"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:733
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Carta Grafach: %s"
-
-#: ../../Xconfigurator.pm_.c:734
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Freastalaí XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:750 ../../standalone/draknet_.c:280
-#: ../../standalone/draknet_.c:283
-#, fuzzy
-msgid "Expert Mode"
-msgstr "Mód Saineolaí"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "Show all"
-msgstr "Taispéan gach ceann"
-
-#: ../../Xconfigurator.pm_.c:794
-msgid "Resolutions"
-msgstr "Réiteachaí"
-
-#: ../../Xconfigurator.pm_.c:1330
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Leagan amach eocharchlára: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1331
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Cineál luchóg: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1332
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Gaireas luchóige: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1333
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Scáileán: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1334
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Scáileán HorizSync: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1335
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Scáileán VertRefresh: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1336
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Carta Grafach: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1337
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Cuimhne grafach: %s kb\n"
-
-#: ../../Xconfigurator.pm_.c:1339
-#, fuzzy, c-format
-msgid "Color depth: %s\n"
-msgstr "Scáileán VertRefresh: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1340
-#, fuzzy, c-format
-msgid "Resolution: %s\n"
-msgstr "Réiteachaí"
-
-#: ../../Xconfigurator.pm_.c:1342
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Freastalaí XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1343
-#, fuzzy, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Freastalaí XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1362
-msgid "Preparing X-Window configuration"
-msgstr "Ag ullmhú cumraíocht X-Windows"
-
-#: ../../Xconfigurator.pm_.c:1382
-msgid "What do you want to do?"
-msgstr "Céard a theastaíonn uait a dhéanamh?"
-
-#: ../../Xconfigurator.pm_.c:1387
-msgid "Change Monitor"
-msgstr "Athraigh Scáileán"
-
-#: ../../Xconfigurator.pm_.c:1388
-msgid "Change Graphic card"
-msgstr "Athraigh carta grafach"
-
-#: ../../Xconfigurator.pm_.c:1390
-msgid "Change Server options"
-msgstr "Athraigh cumraíocht an freastalaí"
-
-#: ../../Xconfigurator.pm_.c:1391
-msgid "Change Resolution"
-msgstr "Athraigh Réiteach"
-
-#: ../../Xconfigurator.pm_.c:1392
-msgid "Show information"
-msgstr "Taispeán Eolas"
-
-#: ../../Xconfigurator.pm_.c:1393
-msgid "Test again"
-msgstr "Bain trial as arís"
-
-#: ../../Xconfigurator.pm_.c:1394 ../../bootlook.pm_.c:238
-msgid "Quit"
-msgstr "Éalaigh"
-
-#: ../../Xconfigurator.pm_.c:1402
-#, fuzzy, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr "Coimead an cumraíocht IP atá ann"
-
-#: ../../Xconfigurator.pm_.c:1423
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1443
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1446
-msgid "X at startup"
-msgstr "X ag tús"
-
-#: ../../Xconfigurator.pm_.c:1447
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Is féidir linn do ríomhaire a shocrú le X a thosnú i ndhiadh bootáil.\n"
-"An dteastaíonn uait go dtosnófar X nuair a aththosnítear an ríomhaire?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 dath (8 giotáin)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 míle dath (15 giotáin)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 míle dath (16 giotáin)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milliún dath (24 giotáin)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 billiún dath (32 giotáin)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB or more"
-msgstr "16 MB nó níos mó"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Gnáth VGA, 640x480 ag 60Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 ag 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Cinéal 8514, 1024x768 ag 87 Hz Idirdhuillith (gan 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ag 87 Hz Idirdhuillithe, 800x600 ag 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "SVGA Leathnaithe, 800x600 ag 60 Hz, 640x480 ag 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA Neamh-idirdhuillithe, 1024x768 ag 60 Hz, 800x600 ag 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA d'árd minicíocht, 1024x768 ag 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Scáileán ilmhinicíocht a bhfuil in ann do 1280x1024 ag 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Scáileán ilmhinicíocht a bhfuil in ann do 1280x1024 ag 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Scáileán ilmhinicíocht a bhfuil in ann do 1280x1024 ag 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Scáileán a bhfuil in ann do 1600x1200 ag 70Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Scáileán a bhfuil in ann do 1600x1200 ag 76Hz"
-
-#: ../../any.pm_.c:99 ../../any.pm_.c:124
-msgid "First sector of boot partition"
-msgstr ""
-
-#: ../../any.pm_.c:99 ../../any.pm_.c:124 ../../any.pm_.c:197
-msgid "First sector of drive (MBR)"
-msgstr ""
-
-#: ../../any.pm_.c:103
-msgid "SILO Installation"
-msgstr "Roghnaigh rang feistiú"
-
-#: ../../any.pm_.c:104 ../../any.pm_.c:117
-msgid "Where do you want to install the bootloader?"
-msgstr ""
-
-#: ../../any.pm_.c:116
-msgid "LILO/grub Installation"
-msgstr "Feistiú LILO/grub"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:142
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:130
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:131 ../../any.pm_.c:142
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:134
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:138
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:140 ../../any.pm_.c:142
-#, fuzzy
-msgid "Yaboot"
-msgstr "Root"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:180
-msgid "Bootloader main options"
-msgstr "Príomhroghanna bootáil"
-
-#: ../../any.pm_.c:149 ../../any.pm_.c:181
-#, fuzzy
-msgid "Bootloader to use"
-msgstr "Príomhroghanna bootáil"
-
-#: ../../any.pm_.c:151
-msgid "Bootloader installation"
-msgstr "Feistiú cód tosnaithe"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:183
-msgid "Boot device"
-msgstr "Gaireas bootáil"
-
-#: ../../any.pm_.c:154
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr ""
-
-#: ../../any.pm_.c:155
-msgid "Compact"
-msgstr "Compact"
-
-#: ../../any.pm_.c:155
-msgid "compact"
-msgstr "compact"
-
-#: ../../any.pm_.c:156 ../../any.pm_.c:256
-msgid "Video mode"
-msgstr "Mód fís"
-
-#: ../../any.pm_.c:158
-msgid "Delay before booting default image"
-msgstr ""
-
-#: ../../any.pm_.c:160 ../../any.pm_.c:741
-#: ../../install_steps_interactive.pm_.c:904 ../../netconnect.pm_.c:629
-#: ../../printerdrake.pm_.c:98 ../../printerdrake.pm_.c:132
-#: ../../standalone/draknet_.c:569
-msgid "Password"
-msgstr "Pasfhocal"
-
-#: ../../any.pm_.c:161 ../../any.pm_.c:742
-#: ../../install_steps_interactive.pm_.c:905
-msgid "Password (again)"
-msgstr "Pasfhocal (arís)"
-
-#: ../../any.pm_.c:162
-msgid "Restrict command line options"
-msgstr ""
-
-#: ../../any.pm_.c:162
-msgid "restrict"
-msgstr "teorannaigh"
-
-#: ../../any.pm_.c:164
-msgid "Clean /tmp at each boot"
-msgstr "Glan /tmp nuair a thosnaigh an coráis"
-
-#: ../../any.pm_.c:165
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr ""
-
-#: ../../any.pm_.c:167
-msgid "Enable multi profiles"
-msgstr ""
-
-#: ../../any.pm_.c:171
-msgid "Give the ram size in MB"
-msgstr ""
-
-#: ../../any.pm_.c:173
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:718
-#: ../../install_steps_interactive.pm_.c:899
-msgid "Please try again"
-msgstr "Aththrialaigh"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:718
-#: ../../install_steps_interactive.pm_.c:899
-msgid "The passwords do not match"
-msgstr "Ní mar a chéile na pasfhocail"
-
-#: ../../any.pm_.c:182
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:184
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:185
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:186
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:187
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:188
-#, fuzzy
-msgid "Default OS?"
-msgstr "Gnáth"
-
-#: ../../any.pm_.c:210
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-
-#: ../../any.pm_.c:220 ../../printerdrake.pm_.c:356
-msgid "Add"
-msgstr "Suim"
-
-#: ../../any.pm_.c:220 ../../any.pm_.c:729 ../../diskdrake.pm_.c:46
-#: ../../printerdrake.pm_.c:356
-msgid "Done"
-msgstr "Críochnithe"
-
-#: ../../any.pm_.c:220
-#, fuzzy
-msgid "Modify"
-msgstr "Athraigh RAID"
-
-#: ../../any.pm_.c:228
-msgid "Which type of entry do you want to add?"
-msgstr "Cén sort iontráil a suimigh do?"
-
-#: ../../any.pm_.c:229
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:229
-msgid "Other OS (SunOS...)"
-msgstr "CO Eile (SunOS...)"
-
-#: ../../any.pm_.c:230
-msgid "Other OS (MacOS...)"
-msgstr "CO Eile (MacOS...)"
-
-#: ../../any.pm_.c:230
-msgid "Other OS (windows...)"
-msgstr "CO Eile (windows...)"
-
-#: ../../any.pm_.c:250 ../../any.pm_.c:252
-msgid "Image"
-msgstr "Iomha"
-
-#: ../../any.pm_.c:253 ../../any.pm_.c:264
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:254 ../../any.pm_.c:283
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:258
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:259
-msgid "Read-write"
-msgstr "Léamh-Scríobh"
-
-#: ../../any.pm_.c:266
-msgid "Table"
-msgstr "Table"
-
-#: ../../any.pm_.c:267
-msgid "Unsafe"
-msgstr "Baolach"
-
-#: ../../any.pm_.c:274 ../../any.pm_.c:279 ../../any.pm_.c:282
-msgid "Label"
-msgstr "Lipéad"
-
-#: ../../any.pm_.c:276 ../../any.pm_.c:287
-msgid "Default"
-msgstr "Gnáth"
-
-#: ../../any.pm_.c:284
-#, fuzzy
-msgid "Initrd-size"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:286
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:294
-msgid "Remove entry"
-msgstr "Scrios iontráil"
-
-#: ../../any.pm_.c:297
-msgid "Empty label not allowed"
-msgstr "Níl ceadaigh an lipéad folamh ann"
-
-#: ../../any.pm_.c:298
-msgid "This label is already used"
-msgstr "Is ann cheana don ainm úsáideora seo"
-
-#: ../../any.pm_.c:317
-#, fuzzy
-msgid "What type of partitioning?"
-msgstr "Cén sort printéir atá ort?"
-
-#: ../../any.pm_.c:608
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Fuair %s %s comhéadan"
-
-#: ../../any.pm_.c:609
-msgid "Do you have another one?"
-msgstr "An bhfuil ceann eile agat?"
-
-#: ../../any.pm_.c:610
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "An bhfuil comhéadan %s agat?"
-
-#: ../../any.pm_.c:612 ../../interactive.pm_.c:104 ../../my_gtk.pm_.c:616
-#: ../../printerdrake.pm_.c:237
-msgid "No"
-msgstr "Níl"
-
-#: ../../any.pm_.c:612 ../../interactive.pm_.c:104 ../../my_gtk.pm_.c:616
-msgid "Yes"
-msgstr "Tá"
-
-#: ../../any.pm_.c:613
-msgid "See hardware info"
-msgstr "Leámh an t-eolais crua-earra"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:648
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Ag feistáil tiomanaí do %s, carta %s"
-
-#: ../../any.pm_.c:649
-#, c-format
-msgid "(module %s)"
-msgstr "(modíl %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:660
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr ""
-
-#: ../../any.pm_.c:668
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-
-#: ../../any.pm_.c:673
-msgid "Autoprobe"
-msgstr ""
-
-#: ../../any.pm_.c:673
-msgid "Specify options"
-msgstr "Cumraigh roghanna"
-
-#: ../../any.pm_.c:677
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr ""
-
-#: ../../any.pm_.c:683
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-
-#: ../../any.pm_.c:686
-msgid "Module options:"
-msgstr "Roghachais modúil:"
-
-#: ../../any.pm_.c:697
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid "(already added %s)"
-msgstr ""
-
-#: ../../any.pm_.c:719
-msgid "This password is too simple"
-msgstr "Tá an pasfhocal seo ro-shimplí"
-
-#: ../../any.pm_.c:720
-msgid "Please give a user name"
-msgstr ""
-
-#: ../../any.pm_.c:721
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-
-#: ../../any.pm_.c:722
-msgid "This user name is already added"
-msgstr "Is ann cheana don ainm úsáideora seo"
-
-#: ../../any.pm_.c:726
-msgid "Add user"
-msgstr "Suimigh úsáideoir"
-
-#: ../../any.pm_.c:727
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-
-#: ../../any.pm_.c:728
-msgid "Accept user"
-msgstr ""
-
-#: ../../any.pm_.c:739
-msgid "Real name"
-msgstr "Fíor ainm"
-
-#: ../../any.pm_.c:740 ../../printerdrake.pm_.c:97
-#: ../../printerdrake.pm_.c:131
-msgid "User name"
-msgstr "Ainm úsáideora"
-
-#: ../../any.pm_.c:743
-msgid "Shell"
-msgstr "Blaosc"
-
-#: ../../any.pm_.c:745
-msgid "Icon"
-msgstr "Dealbh"
-
-#: ../../any.pm_.c:766
-msgid "Autologin"
-msgstr "Uath-Logann"
-
-#: ../../any.pm_.c:767
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"If you don't want to use this feature, click on the cancel button."
-msgstr ""
-"Is féidir linn do ríomhaire a shocrú le X a thosnú i ndhiadh bootáil.\n"
-"An dteastaíonn uait go dtosnófar X nuair a aththosnítear an ríomhaire?"
-
-#: ../../any.pm_.c:769
-msgid "Choose the default user:"
-msgstr "Roghnagih an úsáidoer gneás:"
-
-#: ../../any.pm_.c:770
-#, fuzzy
-msgid "Choose the window manager to run:"
-msgstr "Roghnaigh an Bainistéoir Fhuinneoga a úsásd:"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:262 ../../bootloader.pm_.c:608
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:809
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:812
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:815
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:818
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:821
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-
-#: ../../bootloader.pm_.c:825
-msgid "not enough room in /boot"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:918
-msgid "Desktop"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:920
-msgid "Start Menu"
-msgstr "Clár Tosnú"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "Trialaigh an cumraíocht"
-
-#: ../../bootlook.pm_.c:79
-#, fuzzy
-msgid "/_File"
-msgstr "Comhaid:\n"
-
-#: ../../bootlook.pm_.c:81
-msgid "/File/_New"
-msgstr ""
-
-#: ../../bootlook.pm_.c:82
-msgid "<control>N"
-msgstr ""
-
-#: ../../bootlook.pm_.c:84
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../bootlook.pm_.c:85
-msgid "<control>O"
-msgstr ""
-
-#: ../../bootlook.pm_.c:87
-msgid "/File/_Save"
-msgstr ""
-
-#: ../../bootlook.pm_.c:88
-msgid "<control>S"
-msgstr ""
-
-#: ../../bootlook.pm_.c:90
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "/File/-"
-msgstr ""
-
-#: ../../bootlook.pm_.c:93
-msgid "/File/_Quit"
-msgstr ""
-
-#: ../../bootlook.pm_.c:94
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:96
-msgid "/_Options"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-msgid "/Options/Test"
-msgstr ""
-
-#: ../../bootlook.pm_.c:99
-msgid "/_Help"
-msgstr ""
-
-#: ../../bootlook.pm_.c:101
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../bootlook.pm_.c:111 ../../standalone/drakgw_.c:634
-#: ../../standalone/draknet_.c:262 ../../standalone/tinyfirewall_.c:57
-#, fuzzy
-msgid "Configure"
-msgstr "Cumraigh X"
-
-#: ../../bootlook.pm_.c:114
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../bootlook.pm_.c:121
-msgid "Lilo/grub mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:131
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:134
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Scáileán"
-
-#: ../../bootlook.pm_.c:137
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Athraigh Scáileán"
-
-#: ../../bootlook.pm_.c:140
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:144
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:169
-#, fuzzy
-msgid "Boot mode"
-msgstr "Gaireas bootáil"
-
-#: ../../bootlook.pm_.c:179
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:187
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:193
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:210
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:228
-#, fuzzy
-msgid "Default Runlevel"
-msgstr "Gnáth"
-
-#: ../../bootlook.pm_.c:236 ../../standalone/draknet_.c:88
-#: ../../standalone/draknet_.c:120 ../../standalone/draknet_.c:184
-#: ../../standalone/draknet_.c:302 ../../standalone/draknet_.c:396
-#: ../../standalone/draknet_.c:473 ../../standalone/draknet_.c:509
-#: ../../standalone/draknet_.c:617
-msgid "OK"
-msgstr ""
-
-#: ../../bootlook.pm_.c:238 ../../install_steps_gtk.pm_.c:576
-#: ../../interactive.pm_.c:114 ../../interactive.pm_.c:269
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:357
-#: ../../my_gtk.pm_.c:360 ../../my_gtk.pm_.c:617
-#: ../../standalone/drakgw_.c:639 ../../standalone/draknet_.c:95
-#: ../../standalone/draknet_.c:127 ../../standalone/draknet_.c:295
-#: ../../standalone/draknet_.c:485 ../../standalone/draknet_.c:631
-#: ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Cealaigh"
-
-#: ../../bootlook.pm_.c:315
-msgid "can not open /etc/inittab for reading: $!"
-msgstr ""
-
-#: ../../bootlook.pm_.c:369
-msgid "can not open /etc/sysconfig/autologin for reading: $!"
-msgstr ""
-
-#: ../../bootlook.pm_.c:435 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:21 ../../diskdrake.pm_.c:462
-msgid "Create"
-msgstr "Cruthaigh"
-
-#: ../../diskdrake.pm_.c:22
-msgid "Unmount"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:464
-msgid "Delete"
-msgstr "Dealaigh"
-
-#: ../../diskdrake.pm_.c:23
-msgid "Format"
-msgstr "Formáidigh"
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:653
-msgid "Resize"
-msgstr "Athméidigh"
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:462
-#: ../../diskdrake.pm_.c:518
-msgid "Type"
-msgstr "Cineál"
-
-#: ../../diskdrake.pm_.c:24 ../../diskdrake.pm_.c:539
-msgid "Mount point"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:38
-msgid "Write /etc/fstab"
-msgstr "Scríobh /etc/fstab"
-
-#: ../../diskdrake.pm_.c:39
-msgid "Toggle to expert mode"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:40
-msgid "Toggle to normal mode"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:41
-msgid "Restore from file"
-msgstr "Aisig ó comhad"
-
-#: ../../diskdrake.pm_.c:42
-msgid "Save in file"
-msgstr "Sabháil i gcomhad"
-
-#: ../../diskdrake.pm_.c:43
-msgid "Wizard"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:44
-msgid "Restore from floppy"
-msgstr "Aisig ó dhiosca flapach"
-
-#: ../../diskdrake.pm_.c:45
-msgid "Save on floppy"
-msgstr "Sabháil ar dhiosca flapach"
-
-#: ../../diskdrake.pm_.c:49
-msgid "Clear all"
-msgstr "Glan gach ceann"
-
-#: ../../diskdrake.pm_.c:54
-msgid "Format all"
-msgstr "Formáidigh gach ceann"
-
-#: ../../diskdrake.pm_.c:55
-msgid "Auto allocate"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:59
-msgid "All primary partitions are used"
-msgstr "Tá na ranna príofa uilig úsáidthe"
-
-#: ../../diskdrake.pm_.c:59
-msgid "I can't add any more partition"
-msgstr "Ní féidir liom rann eile a cur isteach"
-
-#: ../../diskdrake.pm_.c:59
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Le breis ranna a bheith agat, dealaigh ceann amháin le bheith in ann "
-"rannsínithe a cruthú"
-
-#: ../../diskdrake.pm_.c:61
-msgid "Not enough space for auto-allocating"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:63
-msgid "Undo"
-msgstr "Cealaigh"
-
-#: ../../diskdrake.pm_.c:64
-msgid "Write partition table"
-msgstr "Scriobh clár-ranna"
-
-#: ../../diskdrake.pm_.c:65 ../../install_steps_interactive.pm_.c:185
-#, fuzzy
-msgid "More"
-msgstr "Bog"
-
-#: ../../diskdrake.pm_.c:116
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:116
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:116
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:116
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:116
-msgid "Swap"
-msgstr "Malairte"
-
-#: ../../diskdrake.pm_.c:117
-msgid "Empty"
-msgstr "Folamh"
-
-#: ../../diskdrake.pm_.c:117 ../../install_steps_gtk.pm_.c:407
-#: ../../mouse.pm_.c:145
-msgid "Other"
-msgstr "Eile"
-
-#: ../../diskdrake.pm_.c:123
-msgid "Filesystem types:"
-msgstr "Cineál córais-comhadlanna"
-
-#: ../../diskdrake.pm_.c:132 ../../install_steps_gtk.pm_.c:577
-msgid "Details"
-msgstr "Sonraí"
-
-#: ../../diskdrake.pm_.c:147
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tá rann mór FAT amháin agat.\n"
-"Molaim dhuit an rann sin a athmhéadú ar dtús\n"
-"(roghnaigh an rann agus brú ar \"Athméidigh\")"
-
-#: ../../diskdrake.pm_.c:152
-msgid "Please make a backup of your data first"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:152 ../../diskdrake.pm_.c:170
-#: ../../diskdrake.pm_.c:179 ../../diskdrake.pm_.c:570
-#: ../../diskdrake.pm_.c:592
-msgid "Read carefully!"
-msgstr "Léigh go curamach"
-
-#: ../../diskdrake.pm_.c:155
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:170
-msgid "Be careful: this operation is dangerous."
-msgstr ""
-
-#: ../../diskdrake.pm_.c:214 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:322 ../../standalone/diskdrake_.c:66
-msgid "Error"
-msgstr "Earráid"
-
-#: ../../diskdrake.pm_.c:238 ../../diskdrake.pm_.c:748
-msgid "Mount point: "
-msgstr ""
-
-#: ../../diskdrake.pm_.c:239 ../../diskdrake.pm_.c:298
-msgid "Device: "
-msgstr "Gaireas: "
-
-#: ../../diskdrake.pm_.c:240
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Litir Dioscthiománt DOS: %s (buile faoi thuraim)\n"
-
-#: ../../diskdrake.pm_.c:244 ../../diskdrake.pm_.c:251
-#: ../../diskdrake.pm_.c:301
-msgid "Type: "
-msgstr "Cineál: "
-
-#: ../../diskdrake.pm_.c:248
-msgid "Name: "
-msgstr "Ainm: "
-
-#: ../../diskdrake.pm_.c:253
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Tús: teascán %s\n"
-
-#: ../../diskdrake.pm_.c:254
-#, c-format
-msgid "Size: %s"
-msgstr "Méid: %s"
-
-#: ../../diskdrake.pm_.c:256
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s teascáin"
-
-#: ../../diskdrake.pm_.c:258
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Sorcóir %d go sorcóir %d\n"
-
-#: ../../diskdrake.pm_.c:259
-msgid "Formatted\n"
-msgstr "Formáidithe\n"
-
-#: ../../diskdrake.pm_.c:260
-msgid "Not formatted\n"
-msgstr "Neamhformáidithe\n"
-
-#: ../../diskdrake.pm_.c:261
-msgid "Mounted\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:262
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake.pm_.c:264
-#, c-format
-msgid "Loopback file(s): %s\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:265
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Rann tosaithe de ghnáth\n"
-"    (do thosnú MS-DOS, ní lilo)\n"
-
-#: ../../diskdrake.pm_.c:267
-#, c-format
-msgid "Level %s\n"
-msgstr "Leibhéal %s\n"
-
-#: ../../diskdrake.pm_.c:268
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Méid smután %s\n"
-
-#: ../../diskdrake.pm_.c:269
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Dioscaí RAID %s\n"
-
-#: ../../diskdrake.pm_.c:271
-#, c-format
-msgid "Loopback file name: %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:274
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:277
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:294
-msgid "Please click on a partition"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:299
-#, c-format
-msgid "Size: %s\n"
-msgstr "Méid: %s\n"
-
-#: ../../diskdrake.pm_.c:300
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Céimseasamh: %s sorcóir, %s ceann, %s teascán\n"
-
-#: ../../diskdrake.pm_.c:302
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Dioscaí LVM %s\n"
-
-#: ../../diskdrake.pm_.c:303
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Cinéal tabla rann: %s\n"
-
-#: ../../diskdrake.pm_.c:304
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "ar bhús %d, id %d\n"
-
-#: ../../diskdrake.pm_.c:320
-msgid "Mount"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:322
-msgid "Active"
-msgstr "Gníomhach"
-
-#: ../../diskdrake.pm_.c:324
-msgid "Add to RAID"
-msgstr "Cur le RAID"
-
-#: ../../diskdrake.pm_.c:326
-msgid "Remove from RAID"
-msgstr "Bain ó RAID"
-
-#: ../../diskdrake.pm_.c:328
-msgid "Modify RAID"
-msgstr "Athraigh RAID"
-
-#: ../../diskdrake.pm_.c:330
-msgid "Add to LVM"
-msgstr "Cur le LVM"
-
-#: ../../diskdrake.pm_.c:332
-msgid "Remove from LVM"
-msgstr "Bain ó LVM"
-
-#: ../../diskdrake.pm_.c:334
-msgid "Use for loopback"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:341
-msgid "Choose action"
-msgstr "Roghnaigh gníomh"
-
-#: ../../diskdrake.pm_.c:435
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Níl mé sasta /boot a cruthú comh fada sin isteach sa diosca, (ar sorcóir > "
-"1024).\n"
-"Má tá tú ag úsáid LILO ní oibróidh sé, nó níl /boot uait muna n-úsáideann tú "
-"LILO"
-
-#: ../../diskdrake.pm_.c:439
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Tá an rann atá roghnaithe agat don fréamh (/) suitithe i ndhiadh an 1024ú\n"
-"sorcóir ar an dhiosca, agus níl aon rann /boot agat.\n"
-"Má tá tú chun LILO a úsáid, beidh ort rann /boot a cruthú ar ball."
-
-#: ../../diskdrake.pm_.c:445
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:462 ../../diskdrake.pm_.c:464
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:468
-msgid "Use ``Unmount'' first"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:469 ../../diskdrake.pm_.c:513
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:481
-msgid "Continue anyway?"
-msgstr "Lean ar aghaidh ar aon nós?"
-
-#: ../../diskdrake.pm_.c:486
-msgid "Quit without saving"
-msgstr "Éalaigh gan sabháil"
-
-#: ../../diskdrake.pm_.c:486
-msgid "Quit without writing the partition table?"
-msgstr "Éalaigh gan an clár-ranna a scríobh?"
-
-#: ../../diskdrake.pm_.c:516
-msgid "Change partition type"
-msgstr "Athraigh cineál ranna"
-
-#: ../../diskdrake.pm_.c:517
-#, fuzzy
-msgid "Which filesystem do you want?"
-msgstr "Cén rann atá uait?"
-
-#: ../../diskdrake.pm_.c:520 ../../diskdrake.pm_.c:780
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:537
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:538
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:542
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:561
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:563
-msgid "Formatting"
-msgstr "Ag formáidiú"
-
-#: ../../diskdrake.pm_.c:564
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:565 ../../install_steps_interactive.pm_.c:430
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Ag formáidiú rann %s"
-
-#: ../../diskdrake.pm_.c:570
-msgid "After formatting all partitions,"
-msgstr "I ndhiadh na rann ar fad formáidiú,"
-
-#: ../../diskdrake.pm_.c:570
-msgid "all data on these partitions will be lost"
-msgstr "caillfear gach sonra ar na ranna"
-
-#: ../../diskdrake.pm_.c:576
-msgid "Move"
-msgstr "Bog"
-
-#: ../../diskdrake.pm_.c:577
-msgid "Which disk do you want to move it to?"
-msgstr "Cén diosca ag a dteastaíonn uait é a bhogadh?"
-
-#: ../../diskdrake.pm_.c:578
-msgid "Sector"
-msgstr "Teascán"
-
-#: ../../diskdrake.pm_.c:579
-msgid "Which sector do you want to move it to?"
-msgstr "Cén tescán ag a dteastaíonn uait é a bhogadh?"
-
-#: ../../diskdrake.pm_.c:582
-msgid "Moving"
-msgstr "Ag bogadh"
-
-#: ../../diskdrake.pm_.c:582
-msgid "Moving partition..."
-msgstr "Ag bogadh rann..."
-
-#: ../../diskdrake.pm_.c:592
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Scríobhfar clár diosca %s go dhiosca!"
-
-#: ../../diskdrake.pm_.c:594
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Beidh ort an ríomhaire a aththosnú sula ndéanfar an athrú"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Computing FAT filesystem bounds"
-msgstr "Ag ríomhadh teorainn na córais-comhadlanna FAT"
-
-#: ../../diskdrake.pm_.c:615 ../../diskdrake.pm_.c:680
-#: ../../install_interactive.pm_.c:107
-msgid "Resizing"
-msgstr "Ag athméadú"
-
-#: ../../diskdrake.pm_.c:643
-#, fuzzy
-msgid "This partition is not resizeable"
-msgstr "Scriobh clár-ranna"
-
-#: ../../diskdrake.pm_.c:648
-#, fuzzy
-msgid "All data on this partition should be backed-up"
-msgstr "caillfear gach sonra ar an rann seo"
-
-#: ../../diskdrake.pm_.c:650
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:660
-msgid "Choose the new size"
-msgstr "Roghnaigh an méid nua"
-
-#: ../../diskdrake.pm_.c:660 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../diskdrake.pm_.c:714
-msgid "Create a new partition"
-msgstr "Cruthaigh rann nua"
-
-#: ../../diskdrake.pm_.c:740
-msgid "Start sector: "
-msgstr "Teascán tosasch: "
-
-#: ../../diskdrake.pm_.c:744 ../../diskdrake.pm_.c:819
-msgid "Size in MB: "
-msgstr "Méid i MB: "
-
-#: ../../diskdrake.pm_.c:747 ../../diskdrake.pm_.c:822
-msgid "Filesystem type: "
-msgstr "Cineál córas-comhadlanna"
-
-#: ../../diskdrake.pm_.c:750
-msgid "Preference: "
-msgstr "Tosaíocht: "
-
-#: ../../diskdrake.pm_.c:798
-msgid "This partition can't be used for loopback"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:808
-msgid "Loopback"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:818
-msgid "Loopback file name: "
-msgstr ""
-
-#: ../../diskdrake.pm_.c:844
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:845
-msgid "File already exists. Use it?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:867 ../../diskdrake.pm_.c:883
-msgid "Select file"
-msgstr "Roghnaigh Comhad"
-
-#: ../../diskdrake.pm_.c:876
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Níl an méid céanna ar an rann cúltaca\n"
-"Lean ar aghaidh ar aon nós?"
-
-#: ../../diskdrake.pm_.c:884
-msgid "Warning"
-msgstr "Rabhadh"
-
-#: ../../diskdrake.pm_.c:885
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Cur diosca flapach sa dioscthiomant\n"
-"Caillfear gach sonra ar an dhiosca seo"
-
-#: ../../diskdrake.pm_.c:896
-msgid "Trying to rescue partition table"
-msgstr "Ag iarraidh an clár-ranna a tarrtháil"
-
-#: ../../diskdrake.pm_.c:905
-msgid "device"
-msgstr "gaireas"
-
-#: ../../diskdrake.pm_.c:906
-msgid "level"
-msgstr "leibhéal"
-
-#: ../../diskdrake.pm_.c:907
-msgid "chunk size"
-msgstr "méid smután"
-
-#: ../../diskdrake.pm_.c:919
-msgid "Choose an existing RAID to add to"
-msgstr "Roghnaigh RAID atá ann le méadú"
-
-#: ../../diskdrake.pm_.c:920 ../../diskdrake.pm_.c:946
-msgid "new"
-msgstr "nua"
-
-#: ../../diskdrake.pm_.c:944
-msgid "Choose an existing LVM to add to"
-msgstr "Roghnaigh LVM atá ann le méadú"
-
-#: ../../diskdrake.pm_.c:949
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:976
-msgid "Removable media automounting"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:977
-msgid "Rescue partition table"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:979
-msgid "Reload"
-msgstr "Athlódaigh"
-
-#: ../../fs.pm_.c:88 ../../fs.pm_.c:95 ../../fs.pm_.c:101 ../../fs.pm_.c:107
-#: ../../fs.pm_.c:113
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "Formáidiú %s de %s teipithe"
-
-#: ../../fs.pm_.c:143
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "níl a fhios agam conas %s a formáidiú go %s"
-
-#: ../../fs.pm_.c:230
-msgid "mount failed: "
-msgstr ""
-
-#: ../../fs.pm_.c:242
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:21
-#, fuzzy
-msgid "simple"
-msgstr "Comhad"
-
-#: ../../fsedit.pm_.c:30
-#, fuzzy
-msgid "server"
-msgstr "X freastalaí"
-
-#: ../../fsedit.pm_.c:262
-msgid "Mount points must begin with a leading /"
-msgstr ""
-
-#: ../../fsedit.pm_.c:265
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:273
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:285
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:286
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:287
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:369
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Earráid ag oscailt %s do scríobh: %s"
-
-#: ../../fsedit.pm_.c:453
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Tharla earráid - ní fhuaireadh aon gaireas ar a bhféadfaí córais-comhadlanna "
-"nua a cruthu. Ba chóir duit do chuid crua-earraí a seiceáil le cúis an fadhb "
-"a aimsiú"
-
-#: ../../fsedit.pm_.c:467
-msgid "You don't have any partitions!"
-msgstr "Níl aon ranna agat!"
-
-#: ../../help.pm_.c:9
-msgid ""
-"Please choose your preferred language for installation and system usage."
-msgstr ""
-
-#: ../../help.pm_.c:12
-msgid ""
-"You need to accept the terms of the above license to continue installation.\n"
-"\n"
-"\n"
-"Please click on \"Accept\" if you agree with its terms.\n"
-"\n"
-"\n"
-"Please click on \"Refuse\" if you disagree with its terms. Installation will "
-"end without modifying your current\n"
-"configuration."
-msgstr ""
-
-#: ../../help.pm_.c:22
-msgid "Choose the layout corresponding to your keyboard from the list above"
-msgstr ""
-
-#: ../../help.pm_.c:25
-msgid ""
-"If you wish other languages (than the one you choose at\n"
-"beginning of installation) will be available after installation, please "
-"chose\n"
-"them in list above. If you want select all, you just need to select \"All\"."
-msgstr ""
-
-#: ../../help.pm_.c:30
-msgid ""
-"Please choose \"Install\" if there are no previous version of Linux-"
-"Mandrake\n"
-"installed or if you wish to use several operating systems.\n"
-"\n"
-"\n"
-"Please choose \"Update\" if you wish to update an already installed version "
-"of Linux-Mandrake.\n"
-"\n"
-"\n"
-"Depend of your knowledge in GNU/Linux, you can choose one of the following "
-"levels to install or update your\n"
-"Linux-Mandrake operating system:\n"
-"\n"
-"\t* Recommended: if you have never installed a GNU/Linux operating system "
-"choose this. Installation will be\n"
-"\t  be very easy and you will be asked only on few questions.\n"
-"\n"
-"\n"
-"\t* Customized: if you are familiar enough with GNU/Linux, you may choose "
-"the primary usage (workstation, server,\n"
-"\t  development) of your system. You will need to answer to more questions "
-"than in \"Recommended\" installation\n"
-"\t  class, so you need to know how GNU/Linux works to choose this "
-"installation class.\n"
-"\n"
-"\n"
-"\t* Expert: if you have a good knowledge in GNU/Linux, you can choose this "
-"installation class. As in \"Customized\"\n"
-"\t  installation class, you will be able to choose the primary usage "
-"(workstation, server, development). Be very\n"
-"\t  careful before choose this installation class. You will be able to "
-"perform a higly customized installation.\n"
-"\t  Answer to some questions can be very difficult if you haven't a good "
-"knowledge in GNU/Linux. So, don't choose\n"
-"\t  this installation class unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:56
-msgid ""
-"Select:\n"
-"\n"
-"  - Customized: If you are familiar enough with GNU/Linux, you may then "
-"choose\n"
-"    the primary usage for your machine. See below for details.\n"
-"\n"
-"\n"
-"  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-"    perform a highly customized installation. As for a \"Customized\"\n"
-"    installation class, you will be able to select the usage for your "
-"system.\n"
-"    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-"DOING!"
-msgstr ""
-
-#: ../../help.pm_.c:68
-msgid ""
-"You must now define your machine usage. Choices are:\n"
-"\n"
-"\t* Workstation: this the ideal choice if you intend to use your machine "
-"primarily for everyday use, at office or\n"
-"\t  at home.\n"
-"\n"
-"\n"
-"\t* Development: if you intend to use your machine primarily for software "
-"development, it is the good choice. You\n"
-"\t  will then have a complete collection of software installed in order to "
-"compile, debug and format source code,\n"
-"\t  or create software packages.\n"
-"\n"
-"\n"
-"\t* Server: if you intend to use this machine as a server, it is the good "
-"choice. Either a file server (NFS or\n"
-"\t  SMB), a print server (Unix style or Microsoft Windows style), an "
-"authentication server (NIS), a database\n"
-"\t  server and so on. As such, do not expect any gimmicks (KDE, GNOME, etc.) "
-"to be installed."
-msgstr ""
-
-#: ../../help.pm_.c:84
-msgid ""
-"DrakX will attempt to look for PCI SCSI adapter(s). If DrakX\n"
-"finds an SCSI adapter and knows which driver to use, it will be "
-"automatically\n"
-"installed.\n"
-"\n"
-"\n"
-"If you have no SCSI adapter, an ISA SCSI adapter or a PCI SCSI adapter that\n"
-"DrakX doesn't recognize, you will be asked if a SCSI adapter is present in "
-"your\n"
-"system. If there is no adapter present, you can click on \"No\". If you "
-"click on\n"
-"\"Yes\", a list of drivers will be presented from which you can select your\n"
-"specific adapter.\n"
-"\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for "
-"the\n"
-"options. This usually works well.\n"
-"\n"
-"\n"
-"If not, you will need to provide options to the driver. Please review the "
-"User\n"
-"Guide (chapter 3, section \"Collective informations on your hardware) for "
-"hints\n"
-"on retrieving this information from hardware documentation, from the\n"
-"manufacturer's Web site (if you have Internet access) or from Microsoft "
-"Windows\n"
-"(if you have it on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:108
-msgid ""
-"At this point, you need to choose where to install your\n"
-"Linux-Mandrake operating system on your hard drive. If it is empty or if an\n"
-"existing operating system uses all the space available on it, you need to\n"
-"partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Linux-Mandrake system.\n"
-"\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced "
-"user.\n"
-"This wizard simplifies this process. Before beginning, please consult the "
-"manual\n"
-"and take your time.\n"
-"\n"
-"\n"
-"You need at least two partitions. One is for the operating system itself and "
-"the\n"
-"other is for the virtual memory (also called Swap).\n"
-"\n"
-"\n"
-"If partitions have been already defined (from a previous installation or "
-"from\n"
-"another partitioning tool), you just need choose those to use to install "
-"your\n"
-"Linux system.\n"
-"\n"
-"\n"
-"If partitions haven't been already defined, you need to create them. \n"
-"To do that, use the wizard available above. Depending of your hard drive\n"
-"configuration, several solutions can be available:\n"
-"\n"
-"\t* Use existing partition: the wizard has detected one or more existing "
-"Linux partitions on your hard drive. If\n"
-"\t  you want to keep them, choose this option. \n"
-"\n"
-"\n"
-"\t* Erase entire disk: if you want delete all data and all partitions "
-"present on your hard drive and replace them by\n"
-"\t  your new Linux-Mandrake system, you can choose this option. Be careful "
-"with this solution, you will not be\n"
-"\t  able to revert your choice after confirmation.\n"
-"\n"
-"\n"
-"\t* Use the free space on the Windows partition: if Microsoft Windows is "
-"installed on your hard drive and takes\n"
-"\t  all space available on it, you have to create free space for Linux data. "
-"To do that you can delete your\n"
-"\t  Microsoft Windows partition and data (see \"Erase entire disk\" or "
-"\"Expert mode\" solutions) or resize your\n"
-"\t  Microsoft Windows partition. Resizing can be performed without loss of "
-"any data. This solution is\n"
-"\t  recommended if you want use both Linux-Mandrake and Microsoft Windows on "
-"same computer.\n"
-"\n"
-"\n"
-"\t  Before choosing this solution, please understand that the size of your "
-"Microsoft\n"
-"\t  Windows partition will be smaller than at present time. It means that "
-"you will have less free space under\n"
-"\t  Microsoft Windows to store your data or install new software.\n"
-"\n"
-"\n"
-"\t* Expert mode: if you want to partition manually your hard drive, you can "
-"choose this option. Be careful before\n"
-"\t  choosing this solution. It is powerful but it is very dangerous. You can "
-"lose all your data very easily. So,\n"
-"\t  don't choose this solution unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:160
-msgid ""
-"At this point, you need to choose what\n"
-"partition(s) to use to install your new Linux-Mandrake system. If "
-"partitions\n"
-"have been already defined (from a previous installation of GNU/Linux or "
-"from\n"
-"another partitioning tool), you can use existing partitions. In other "
-"cases,\n"
-"hard drive partitions must be defined.\n"
-"\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select "
-"the\n"
-"disk for partitioning by clicking on \"hda\" for the first IDE drive, \"hdb"
-"\" for\n"
-"the second or \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-"   * Clear all: this option deletes all partitions available on the selected "
-"hard drive.\n"
-"\n"
-"\n"
-"   * Auto allocate: this option allows you to automatically create Ext2 and "
-"swap partitions in free space of your\n"
-"     hard drive.\n"
-"\n"
-"\n"
-"   * Rescue partition table: if your partition table is damaged, you can try "
-"to recover it using this option. Please\n"
-"     be careful and remember that it can fail.\n"
-"\n"
-"\n"
-"   * Undo: you can use this option to cancel your changes.\n"
-"\n"
-"\n"
-"   * Reload: you can use this option if you wish to undo all changes and "
-"load your initial partitions table\n"
-"\n"
-"\n"
-"   * Wizard: If you wish to use a wizard to partition your hard drive, you "
-"can use this option. It is recommended if\n"
-"     you do not have a good knowledge in partitioning.\n"
-"\n"
-"\n"
-"   * Restore from floppy: if you have saved your partition table on a floppy "
-"during a previous installation, you can\n"
-"     recover it using this option.\n"
-"\n"
-"\n"
-"   * Save on floppy: if you wish to save your partition table on a floppy to "
-"be able to recover it, you can use this\n"
-"     option. It is strongly recommended to use this option\n"
-"\n"
-"\n"
-"   * Done: when you have finished partitioning your hard drive, use this "
-"option to save your changes.\n"
-"\n"
-"\n"
-"For information, you can reach any option using the keyboard: navigate "
-"trough the partitions using Tab and Up/Down arrows.\n"
-"\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-"           * Ctrl-c to create a new partition (when a empty partition is "
-"selected)\n"
-"\n"
-"           * Ctrl-d to delete a partition\n"
-"\n"
-"           * Ctrl-m to set the mount point\n"
-"           \n"
-"\n"
-"           \n"
-"If you are installing on a PPC Machine, you will want to create a small HFS "
-"'bootstrap' partition of at least 1MB for use\n"
-"by the yaboot bootloader. If you opt to make the partition a bit larger, say "
-"50MB, you may find it a useful place to store \n"
-"a spare kernel and ramdisk image for emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Above are listed the existing Linux partitions detected on\n"
-"your hard drive. You can keep choices make by the wizard, they are good for "
-"a\n"
-"common usage. If you change these choices, you must at least define a root\n"
-"partition (\"/\"). Don't choose a too little partition or you will not be "
-"able\n"
-"to install enough software. If you want store your data on a separate "
-"partition,\n"
-"you need also to choose a \"/home\" (only possible if you have more than "
-"one\n"
-"Linux partition available).\n"
-"\n"
-"\n"
-"For information, each partition is listed as follows: \"Name\", \"Capacity"
-"\".\n"
-"\n"
-"\n"
-"\"Name\" is coded as follow: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and "
-"\"sd\"\n"
-"if it is an SCSI hard drive.\n"
-"\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE "
-"hard drives:\n"
-"\n"
-"   * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-"   * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"\n"
-"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means "
-"\"secondary hard drive\", etc..."
-msgstr ""
-
-#: ../../help.pm_.c:258
-msgid ""
-"Choose the hard drive you want to erase to install your\n"
-"new Linux-Mandrake partition. Be careful, all data present on it will be "
-"lost\n"
-"and will not be recoverable."
-msgstr ""
-
-#: ../../help.pm_.c:263
-msgid ""
-"Click on \"OK\" if you want to delete all data and\n"
-"partitions present on this hard drive. Be careful, after clicking on \"OK\", "
-"you\n"
-"will not be able to recover any data and partitions present on this hard "
-"drive,\n"
-"including any Windows data.\n"
-"\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../help.pm_.c:273
-msgid ""
-"More than one Microsoft Windows partition have been\n"
-"detected on your hard drive. Please choose the one you want resize to "
-"install\n"
-"your new Linux-Mandrake operating system.\n"
-"\n"
-"\n"
-"For information, each partition is listed as follow; \"Linux name\", "
-"\"Windows\n"
-"name\" \"Capacity\".\n"
-"\n"
-"\"Linux name\" is coded as follow: \"hard drive type\", \"hard drive number"
-"\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and \"sd"
-"\"\n"
-"if it is an SCSI hard drive.\n"
-"\n"
-"\n"
-"\"Hard drive number\" is always a letter putted after \"hd\" or \"sd\". With "
-"IDE hard drives:\n"
-"\n"
-"   * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-"   * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means "
-"\"secondary hard drive\", etc.\n"
-"\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first "
-"disk\n"
-"or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:306
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:309
-msgid ""
-"Any partitions that have been newly defined must be\n"
-"formatted for use (formatting meaning creating a filesystem).\n"
-"\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to "
-"erase\n"
-"the data they contain. If you wish do that, please also select the "
-"partitions\n"
-"you want to format.\n"
-"\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing "
-"partitions.\n"
-"You must reformat the partitions containing the operating system (such as \"/"
-"\",\n"
-"\"/usr\" or \"/var\") but do you no have to reformat partitions containing "
-"data\n"
-"that you wish to keep (typically /home).\n"
-"\n"
-"\n"
-"Please be careful selecting partitions, after formatting, all data will be\n"
-"deleted and you will not be able to recover any of them.\n"
-"\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"\n"
-"Click on \"Cancel\" if you want to choose other partitions to install your "
-"new\n"
-"Linux-Mandrake operating system."
-msgstr ""
-
-#: ../../help.pm_.c:335
-msgid ""
-"You may now select the group of packages you wish to\n"
-"install or upgrade.\n"
-"\n"
-"\n"
-"DrakX will then check whether you have enough room to install them all. If "
-"not,\n"
-"it will warn you about it. If you want to go on anyway, it will proceed onto "
-"the\n"
-"installation of all selected groups but will drop some packages of lesser\n"
-"interest. At the bottom of the list you can select the option \n"
-"\"Individual package selection\"; in this case you will have to browse "
-"through\n"
-"more than 1000 packages..."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"You can now choose individually all the packages you\n"
-"wish to install.\n"
-"\n"
-"\n"
-"You can expand or collapse the tree by clicking on options in the left "
-"corner of\n"
-"the packages window.\n"
-"\n"
-"\n"
-"If you prefer to see packages sorted in alphabetic order, click on the icon\n"
-"\"Toggle flat and group sorted\".\n"
-"\n"
-"\n"
-"If you want not to be warned on dependencies, click on \"Automatic\n"
-"dependencies\". If you do this, note that unselecting one package may "
-"silently\n"
-"unselect several other packages which depend on it."
-msgstr ""
-
-#: ../../help.pm_.c:364
-msgid ""
-"If you have all the CDs in the list above, click Ok. If you have\n"
-"none of those CDs, click Cancel. If only some CDs are missing, unselect "
-"them,\n"
-"then click Ok."
-msgstr ""
-
-#: ../../help.pm_.c:369
-msgid ""
-"Your new Linux-Mandrake operating system is currently being\n"
-"installed. This operation should take a few minutes (it depends on size you\n"
-"choose to install and the speed of your computer).\n"
-"\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:377
-msgid ""
-"You can now test your mouse. Use buttons and wheel to verify\n"
-"if settings are good. If not, you can click on \"Cancel\" to choose another\n"
-"driver."
-msgstr ""
-
-#: ../../help.pm_.c:382
-msgid ""
-"Please select the correct port. For example, the COM1\n"
-"port under MS Windows is named ttyS0 under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:386
-msgid ""
-"If you wish to connect your computer to the Internet or\n"
-"to a local network please choose the correct option. Please turn on your "
-"device\n"
-"before choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"\n"
-"If you do not have any connection to the Internet or a local network, "
-"choose\n"
-"\"Disable networking\".\n"
-"\n"
-"\n"
-"If you wish to configure the network later after installation or if you "
-"have\n"
-"finished to configure your network connection, choose \"Done\"."
-msgstr ""
-
-#: ../../help.pm_.c:399
-msgid ""
-"No modem has been detected. Please select the serial port on which it is "
-"plugged.\n"
-"\n"
-"\n"
-"For information, the first serial port (called \"COM1\" under Microsoft\n"
-"Windows) is called \"ttyS0\" under Linux."
-msgstr ""
-
-#: ../../help.pm_.c:406
-msgid ""
-"You may now enter dialup options. If you don't know\n"
-"or are not sure what to enter, the correct informations can be obtained "
-"from\n"
-"your Internet Service Provider. If you do not enter the DNS (name server)\n"
-"information here, this information will be obtained from your Internet "
-"Service\n"
-"Provider at connection time."
-msgstr ""
-
-#: ../../help.pm_.c:413
-msgid ""
-"If your modem is an external modem, please turn on it now to let DrakX "
-"detect it automatically."
-msgstr ""
-
-#: ../../help.pm_.c:416
-msgid "Please turn on your modem and choose the correct one."
-msgstr ""
-
-#: ../../help.pm_.c:419
-msgid ""
-"If you are not sure if informations above are\n"
-"correct or if you don't know or are not sure what to enter, the correct\n"
-"informations can be obtained from your Internet Service Provider. If you do "
-"not\n"
-"enter the DNS (name server) information here, this information will be "
-"obtained\n"
-"from your Internet Service Provider at connection time."
-msgstr ""
-
-#: ../../help.pm_.c:426
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, the correct informations can be\n"
-"obtained from your Internet Service Provider."
-msgstr ""
-
-#: ../../help.pm_.c:431
-msgid ""
-"You may now configure your network device.\n"
-"\n"
-"   * IP address: if you don't know or are not sure what to enter, ask your "
-"network administrator.\n"
-"     You should not enter an IP address if you select the option \"Automatic "
-"IP\" below.\n"
-"\n"
-"   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-"know or are not sure what to enter,\n"
-"     ask your network administrator.\n"
-"\n"
-"   * Automatic IP: if your network uses BOOTP or DHCP protocol, select this "
-"option. If selected, no value is needed in\n"
-"    \"IP address\". If you don't know or are not sure if you need to select "
-"this option, ask your network administrator."
-msgstr ""
-
-#: ../../help.pm_.c:443
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, ask your network administrator."
-msgstr ""
-
-#: ../../help.pm_.c:447
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, leave blank."
-msgstr ""
-
-#: ../../help.pm_.c:451
-msgid ""
-"You may now enter dialup options. If you're not sure what to enter, the\n"
-"correct information can be obtained from your ISP."
-msgstr ""
-
-#: ../../help.pm_.c:455
-msgid ""
-"If you will use proxies, please configure them now. If you don't know if\n"
-"you should use proxies, ask your network administrator or your ISP."
-msgstr ""
-
-#: ../../help.pm_.c:459
-msgid ""
-"You can install cryptographic package if your internet connection has been\n"
-"set up correctly. First choose a mirror where you wish to download packages "
-"and\n"
-"after that select the packages to install.\n"
-"\n"
-"\n"
-"Note you have to select mirror and cryptographic packages according\n"
-"to your legislation."
-msgstr ""
-
-#: ../../help.pm_.c:468
-msgid "You can now select your timezone according to where you live."
-msgstr ""
-
-#: ../../help.pm_.c:471
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage\n"
-"Time) and translates it in local time according to the time zone you have\n"
-"selected.\n"
-"\n"
-"\n"
-"If you use Microsoft Windows on this computer, choose \"No\"."
-msgstr ""
-
-#: ../../help.pm_.c:479
-msgid ""
-"You may now choose which services you want to start at boot time.\n"
-"\n"
-"\n"
-"When your mouse comes over an item, a small balloon help will popup which\n"
-"describes the role of the service.\n"
-"\n"
-"\n"
-"Be very careful in this step if you intend to use your machine as a server: "
-"you\n"
-"will probably want not to start any services that you don't need. Please\n"
-"remember that several services can be dangerous if they are enable on a "
-"server.\n"
-"In general, select only the services that you really need."
-msgstr ""
-
-#: ../../help.pm_.c:492
-msgid ""
-"You can configure a local printer (connected to your computer) or remote\n"
-"printer (accessible via a Unix, Netware or Microsoft Windows network)."
-msgstr ""
-
-#: ../../help.pm_.c:496
-msgid ""
-"If you wish to be able to print, please choose one printing system between\n"
-"CUPS and LPR.\n"
-"\n"
-"\n"
-"CUPS is a new, powerful and flexible printing system for Unix systems (CUPS\n"
-"means \"Common Unix Printing System\"). It is the default printing system "
-"in\n"
-"Linux-Mandrake.\n"
-"\n"
-"\n"
-"LPR is the old printing system used in previous Linux-Mandrake "
-"distributions.\n"
-"\n"
-"\n"
-"If you don't have printer, click on \"None\"."
-msgstr ""
-
-#: ../../help.pm_.c:511
-msgid ""
-"GNU/Linux can deal with many types of printer. Each of these types requires\n"
-"a different setup.\n"
-"\n"
-"\n"
-"If your printer is physically connected to your computer, select \"Local\n"
-"printer\".\n"
-"\n"
-"\n"
-"If you want to access a printer located on a remote Unix machine, select\n"
-"\"Remote printer\".\n"
-"\n"
-"\n"
-"If you want to access a printer located on a remote Microsoft Windows "
-"machine\n"
-"(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-msgstr ""
-
-#: ../../help.pm_.c:527
-msgid ""
-"Please turn on your printer before continuing to let DrakX detect it.\n"
-"\n"
-"You have to enter some informations here.\n"
-"\n"
-"\n"
-"   * Name of printer: the print spooler uses \"lp\" as default printer name. "
-"So, you must have a printer named \"lp\".\n"
-"     If you have only one printer, you can use several names for it. You "
-"just need to separate them by a pipe\n"
-"     character (a \"|\"). So, if you prefer a more meaningful name, you have "
-"to put it first, eg: \"My printer|lp\".\n"
-"     The printer having \"lp\" in its name(s) will be the default printer.\n"
-"\n"
-"\n"
-"   * Description: this is optional but can be useful if several printers are "
-"connected to your computer or if you allow\n"
-"     other computers to access to this printer.\n"
-"\n"
-"\n"
-"   * Location: if you want to put some information on your\n"
-"     printer location, put it here (you are free to write what\n"
-"     you want, for example \"2nd floor\").\n"
-msgstr ""
-
-#: ../../help.pm_.c:548
-msgid ""
-"You need to enter some informations here.\n"
-"\n"
-"\n"
-"   * Name of queue: the print spooler uses \"lp\" as default printer name. "
-"So, you need have a printer named \"lp\".\n"
-"    If you have only one printer, you can use several names for it. You just "
-"need to separate them by a pipe\n"
-"    character (a \"|\"). So, if you prefer to have a more meaningful name, "
-"you have to put it first, eg: \"My printer|lp\".\n"
-"    The printer having \"lp\" in its name(s) will be the default printer.\n"
-"\n"
-"  \n"
-"   * Spool directory: it is in this directory that printing jobs are stored. "
-"Keep the default choice\n"
-"     if you don't know what to use\n"
-"\n"
-"\n"
-"   * Printer Connection: If your printer is physically connected to your "
-"computer, select \"Local printer\".\n"
-"     If you want to access a printer located on a remote Unix machine, "
-"select \"Remote lpd printer\".\n"
-"\n"
-"\n"
-"     If you want to access a printer located on a remote Microsoft Windows "
-"machine (or on Unix machine using SMB\n"
-"     protocol), select \"SMB/Windows 95/98/NT\".\n"
-"\n"
-"\n"
-"     If you want to acces a printer located on NetWare network, select "
-"\"NetWare\".\n"
-msgstr ""
-
-#: ../../help.pm_.c:573
-msgid ""
-"Your printer has not been detected. Please enter the name of the device on\n"
-"which it is connected.\n"
-"\n"
-"\n"
-"For information, most printers are connected on the first parallel port. "
-"This\n"
-"one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-"Windows."
-msgstr ""
-
-#: ../../help.pm_.c:581
-msgid "You must now select your printer in the above list."
-msgstr ""
-
-#: ../../help.pm_.c:584
-msgid ""
-"Please select the right options according to your printer.\n"
-"Please see its documentation if you don't know what choose here.\n"
-"\n"
-"\n"
-"You will be able to test your configuration in next step and you will be "
-"able to modify it if it doesn't work as you want."
-msgstr ""
-
-#: ../../help.pm_.c:591
-msgid ""
-"You can now enter the root password for your Linux-Mandrake system.\n"
-"The password must be entered twice to verify that both password entries are "
-"identical.\n"
-"\n"
-"\n"
-"Root is the system's administrator and is the only user allowed to modify "
-"the\n"
-"system configuration. Therefore, choose this password carefully. \n"
-"Unauthorized use of the root account can be extemely dangerous to the "
-"integrity\n"
-"of the system, its data and other system connected to it.\n"
-"\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. It should never be written down.\n"
-"\n"
-"\n"
-"Do not make the password too long or complicated, though: you must be able "
-"to\n"
-"remember it without too much effort."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"To enable a more secure system, you should select \"Use shadow file\" and\n"
-"\"Use MD5 passwords\"."
-msgstr ""
-
-#: ../../help.pm_.c:613
-msgid ""
-"If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n"
-"network administrator."
-msgstr ""
-
-#: ../../help.pm_.c:617
-msgid ""
-"You may now create one or more \"regular\" user account(s), as\n"
-"opposed to the \"privileged\" user account, root. You can create\n"
-"one or more account(s) for each person you want to allow to use\n"
-"the computer. Note that each user account will have its own\n"
-"preferences (graphical environment, program settings, etc.)\n"
-"and its own \"home directory\", in which these preferences are\n"
-"stored.\n"
-"\n"
-"\n"
-"First of all, create an account for yourself! Even if you will be the only "
-"user\n"
-"of the machine, you may NOT connect as root for daily use of the system: "
-"it's a\n"
-"very high security risk. Making the system unusable is very often a typo "
-"away.\n"
-"\n"
-"\n"
-"Therefore, you should connect to the system using the user account\n"
-"you will have created here, and login as root only for administration\n"
-"and maintenance purposes."
-msgstr ""
-
-#: ../../help.pm_.c:636
-msgid ""
-"Creating a boot disk is strongly recommended. If you can't\n"
-"boot your computer, it's the only way to rescue your system without\n"
-"reinstalling it."
-msgstr ""
-
-#: ../../help.pm_.c:641
-msgid ""
-"You need to indicate where you wish\n"
-"to place the information required to boot to GNU/Linux.\n"
-"\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of\n"
-"drive (MBR)\"."
-msgstr ""
-
-#: ../../help.pm_.c:649
-msgid ""
-"Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-" (primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-msgstr ""
-
-#: ../../help.pm_.c:653
-msgid ""
-"LILO (the LInux LOader) and Grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"You may also want not to give access to these other operating systems to\n"
-"anyone, in which case you can delete the corresponding entries. But\n"
-"in this case, you will need a boot disk in order to boot them!"
-msgstr ""
-
-#: ../../help.pm_.c:665
-msgid ""
-"LILO and grub main options are:\n"
-"  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-"partition) that contains the boot sector. Unless you know specifically\n"
-"otherwise, choose \"/dev/hda\".\n"
-"\n"
-"\n"
-"  - Delay before booting default image: Specifies the number in tenths\n"
-"of a second the boot loader should wait before booting the first image.\n"
-"This is useful on systems that immediately boot from the hard disk after\n"
-"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-"omitted or is set to zero.\n"
-"\n"
-"\n"
-"  - Video mode: This specifies the VGA text mode that should be selected\n"
-"when booting. The following values are available: \n"
-"\n"
-"    * normal: select normal 80x25 text mode.\n"
-"\n"
-"    * <number>:  use the corresponding text mode.\n"
-"\n"
-"\n"
-"  - Clean \"/tmp\" at each boot: if you want delete all files and "
-"directories\n"
-"stored in \"/tmp\" when you boot your system, select this option.\n"
-"\n"
-"\n"
-"  - Precise RAM if needed: unfortunately, there is no standard method to ask "
-"the\n"
-"BIOS about the amount of RAM present in your computer. As consequence, Linux "
-"may\n"
-"fail to detect your amount of RAM correctly. If this is the case, you can\n"
-"specify the correct amount or RAM here. Please note that a difference of 2 "
-"or 4\n"
-"MB between detected memory and memory present in your system is normal."
-msgstr ""
-
-#: ../../help.pm_.c:697
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n"
-"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"Yaboot main options are:\n"
-"\n"
-"\n"
-"  - Init Message: A simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-"\n"
-"  - Boot Device: Indicate where you want to place the information required "
-"to \n"
-"boot to GNU/Linux. Generally, you will have setup a bootstrap partition "
-"earlier \n"
-"to hold this information.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: Unlike LILO, there are two delays available with \n"
-"yaboot.  The first delay is measured in seconds and at this point you can \n"
-"choose between CD, OF boot, MacOS, or Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: This timeout is similar to the LILO boot delay.  "
-"After \n"
-"selecting Linux, you will have this delay in 0.1 seconds before your "
-"default\n"
-"kernel description is selected.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: Checking this option will allow you to choose 'C' for "
-"CD at\n"
-"the first boot prompt.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: Checking this option will allow you to choose 'N' for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-"\n"
-"  - Default OS: You can select which OS will boot by default when the Open "
-"Firmware \n"
-"Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:738
-msgid ""
-"You can add additional entries for yaboot, either for other operating "
-"systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"\n"
-"For other OS's - the entry consists only of a label and the root partition.\n"
-"\n"
-"\n"
-"For Linux, there are a few possible options: \n"
-"\n"
-"\n"
-"  - Label: This is simply the name will type at the yaboot prompt to select "
-"this \n"
-"boot option.\n"
-"\n"
-"\n"
-"  - Image: This would be the name of the kernel to boot.  Typically vmlinux "
-"or\n"
-"a variation of vmlinux with an extension.\n"
-"\n"
-"\n"
-"  - Root: The root device or '/' for your Linux installation.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: On Apple hardware, the kernel append option is used quite often "
-"to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button "
-"emulation\n"
-"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The "
-"following \n"
-"are some examples:\n"
-"\n"
-"\n"
-"\t\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: This option can be used either to load initial modules, before "
-"the boot \n"
-"device is available, or to load a ramdisk image for an emergency boot "
-"situation.\n"
-"\n"
-"\n"
-"  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you "
-"should need\n"
-"to allocate a large ramdisk, this option can be used.\n"
-"\n"
-"\n"
-"  - Read-write: Normally the 'root' partition is initially brought up read-"
-"only, to allow\n"
-"a filesystem check before the system becomes 'live'.  You can override this "
-"option here.\n"
-"\n"
-"\n"
-"  - NoVideo: Should the Apple video hardware prove to be exceptionally "
-"problematic, you can\n"
-"select this option to boot in 'novideo' mode, with native framebuffer "
-"support.\n"
-"\n"
-"\n"
-"  - Default: Selects this entry as being the default Linux selection, "
-"selectable by just\n"
-"pressing ENTER at the yaboot prompt.  This entry will also be highlighted "
-"with a '*', if you\n"
-"press TAB to see the boot selections."
-msgstr ""
-
-#: ../../help.pm_.c:793
-msgid ""
-"SILO is a bootloader for SPARC: it is able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"You may also want not to give access to these other operating systems to\n"
-"anyone, in which case you can delete the corresponding entries. But\n"
-"in this case, you will need a boot disk in order to boot them!"
-msgstr ""
-
-#: ../../help.pm_.c:805
-msgid ""
-"SILO main options are:\n"
-"  - Bootloader installation: Indicate where you want to place the\n"
-"information required to boot to GNU/Linux. Unless you know exactly\n"
-"what you are doing, choose \"First sector of drive (MBR)\".\n"
-"\n"
-"\n"
-"  - Delay before booting default image: Specifies the number in tenths\n"
-"of a second the boot loader should wait before booting the first image.\n"
-"This is useful on systems that immediately boot from the hard disk after\n"
-"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-"omitted or is set to zero."
-msgstr ""
-
-#: ../../help.pm_.c:818
-msgid ""
-"Now it's time to configure the X Window System, which is the\n"
-"core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-"you must configure your video card and monitor. Most of these\n"
-"steps are automated, though, therefore your work may only consist\n"
-"of verifying what has been done and accept the settings :)\n"
-"\n"
-"\n"
-"When the configuration is over, X will be started (unless you\n"
-"ask DrakX not to) so that you can check and see if the\n"
-"settings suit you. If they don't, you can come back and\n"
-"change them, as many times as necessary."
-msgstr ""
-
-#: ../../help.pm_.c:831
-msgid ""
-"If something is wrong in X configuration, use these options to correctly\n"
-"configure the X Window System."
-msgstr ""
-
-#: ../../help.pm_.c:835
-msgid ""
-"If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n"
-"\"No\"."
-msgstr ""
-
-#: ../../help.pm_.c:839
-msgid ""
-"You can choose a security level for your system. Please refer to the manual "
-"for complete\n"
-"  information. Basically, if you don't know what to choose, keep the default "
-"option.\n"
-msgstr ""
-
-#: ../../help.pm_.c:844
-msgid ""
-"Your system is going to reboot.\n"
-"\n"
-"After rebooting, your new Linux Mandrake system will load automatically.\n"
-"If you want to boot into another existing operating system, please read\n"
-"the additional instructions."
-msgstr ""
-
-#: ../../install2.pm_.c:37
-msgid "Choose your language"
-msgstr "Roghnaigh do theanga"
-
-#: ../../install2.pm_.c:38
-msgid "Select installation class"
-msgstr "Roghnaigh rang feistiú"
-
-#: ../../install2.pm_.c:39
-msgid "Hard drive detection"
-msgstr ""
-
-#: ../../install2.pm_.c:40
-msgid "Configure mouse"
-msgstr "Cumraigh luchóg"
-
-#: ../../install2.pm_.c:41
-msgid "Choose your keyboard"
-msgstr "Roghnaigh mhéarchlár"
-
-#: ../../install2.pm_.c:42
-msgid "Security"
-msgstr ""
-
-#: ../../install2.pm_.c:43
-msgid "Setup filesystems"
-msgstr "Socraigh córas chomhad"
-
-#: ../../install2.pm_.c:44
-msgid "Format partitions"
-msgstr "Formáidigh ranna"
-
-#: ../../install2.pm_.c:45
-msgid "Choose packages to install"
-msgstr "Roghnaigh pacáistí ..."
-
-#: ../../install2.pm_.c:46
-msgid "Install system"
-msgstr "Feistigh córas"
-
-#: ../../install2.pm_.c:47 ../../install_steps_interactive.pm_.c:894
-#: ../../install_steps_interactive.pm_.c:895
-msgid "Set root password"
-msgstr "Socraigh pasfhocal root"
-
-#: ../../install2.pm_.c:48
-msgid "Add a user"
-msgstr "Suimigh úsáideoir"
-
-#: ../../install2.pm_.c:49
-msgid "Configure networking"
-msgstr "Cumraigh gréasánú"
-
-#: ../../install2.pm_.c:51 ../../install_steps_interactive.pm_.c:818
-msgid "Summary"
-msgstr ""
-
-#: ../../install2.pm_.c:52
-msgid "Configure services"
-msgstr "Cumraigh seirbhisí"
-
-#: ../../install2.pm_.c:54
-msgid "Create a bootdisk"
-msgstr "Cruthaigh an diosca "
-
-#: ../../install2.pm_.c:56
-msgid "Install bootloader"
-msgstr "Feistigh cód tosnaithe"
-
-#: ../../install2.pm_.c:57
-msgid "Configure X"
-msgstr "Cumraigh X"
-
-#: ../../install2.pm_.c:58
-msgid "Exit install"
-msgstr "Eirigh as Feistiú"
-
-#: ../../install_any.pm_.c:402
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:433
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:676
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
-
-#: ../../install_any.pm_.c:680
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:690
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:712
-msgid "Error reading file $f"
-msgstr "Earráid ag léamh comhad $f"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:310
-#: ../../interactive.pm_.c:99 ../../interactive.pm_.c:114
-#: ../../interactive.pm_.c:269 ../../interactive_newt.pm_.c:166
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:356
-#: ../../my_gtk.pm_.c:617 ../../my_gtk.pm_.c:640
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../install_gtk.pm_.c:423
-msgid "Please test the mouse"
-msgstr ""
-
-#: ../../install_gtk.pm_.c:424 ../../standalone/mousedrake_.c:132
-msgid "To activate the mouse,"
-msgstr ""
-
-#: ../../install_gtk.pm_.c:425 ../../standalone/mousedrake_.c:133
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:41
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:46 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:47 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Níl aon ranna malairte agat\n"
-"\n"
-"x1Lean ar aghaidh ar aon nós?"
-
-#: ../../install_interactive.pm_.c:68
-msgid "Use free space"
-msgstr "Úsáid spás saor"
-
-#: ../../install_interactive.pm_.c:70
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:78
-msgid "Use existing partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:80
-#, fuzzy
-msgid "There is no existing partition to use"
-msgstr "Ag iarraidh an clár-ranna a tarrtháil"
-
-#: ../../install_interactive.pm_.c:87
-msgid "Use the Windows partition for loopback"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:90
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Cén rann a bhfuil tú ag iarraidh úsáid mar rann fréamhach"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Choose the sizes"
-msgstr "Roghnaigh an méid nua"
-
-#: ../../install_interactive.pm_.c:93
-msgid "Root partition size in MB: "
-msgstr "Méid i MB do Rhann Fréamhach:"
-
-#: ../../install_interactive.pm_.c:94
-msgid "Swap partition size in MB: "
-msgstr "Méid i MB do rhann malairte:"
-
-#: ../../install_interactive.pm_.c:102
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:105
-msgid "Which partition do you want to resize?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:107
-#, fuzzy
-msgid "Computing Windows filesystem bounds"
-msgstr "Ag ríomhadh teorainn na córais-comhadlanna FAT"
-
-#: ../../install_interactive.pm_.c:110
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:113
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:114
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-
-#: ../../install_interactive.pm_.c:123
-msgid "Which size do you want to keep for windows on"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:124
-#, c-format
-msgid "partition %s"
-msgstr "rann %s"
-
-#: ../../install_interactive.pm_.c:130
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Theip ar uathathmhéadú FAT: %s"
-
-#: ../../install_interactive.pm_.c:145
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:151
-msgid "Erase entire disk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:151
-msgid "Remove Windows(TM)"
-msgstr "Dealaigh Windows(TM)"
-
-#: ../../install_interactive.pm_.c:154
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:157
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:165
-msgid "Custom disk partitioning"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:169
-msgid "Use fdisk"
-msgstr "Úsáid fdisk"
-
-#: ../../install_interactive.pm_.c:172
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:201
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Níl aon ranna agat!"
-
-#: ../../install_interactive.pm_.c:217
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Ní féidir liom rann eile a cur isteach"
-
-#: ../../install_interactive.pm_.c:221
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:226
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Theip ar rannú: %s"
-
-#: ../../install_interactive.pm_.c:232
-msgid "Bringing up the network"
-msgstr "Ag tosnú suas an ghréasán"
-
-#: ../../install_interactive.pm_.c:237
-msgid "Bringing down the network"
-msgstr "Ag dúnadh síos an ghreasán"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ta earraid ann, níl a fhios agam conas é a cheartú.\n"
-"Lean ort, ar do phriacal féin."
-
-#: ../../install_steps.pm_.c:203
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Pointe taca dublach %s"
-
-#: ../../install_steps.pm_.c:385
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-
-#: ../../install_steps.pm_.c:451
-#, c-format
-msgid "Welcome to %s"
-msgstr "Fáilte go %s"
-
-#: ../../install_steps.pm_.c:634
-msgid "No floppy drive available"
-msgstr "Níl dioscthiománt flapach ar fáil"
-
-#: ../../install_steps_auto_install.pm_.c:51
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Ag tosnú ar céim `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-#, fuzzy
-msgid "Choose the size you want to install"
-msgstr "Roghnaigh na ranna atá le formáidiú"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Méid iomlán: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:437
-#, c-format
-msgid "Version: %s\n"
-msgstr "Leagan: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:438
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Méid: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:337
-#: ../../install_steps_interactive.pm_.c:520
-msgid "Choose the packages you want to install"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:465 ../../install_steps_gtk.pm_.c:340
-msgid "Info"
-msgstr "Eolas"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:345
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install"
-msgstr "Feistiú"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:558
-#: ../../install_steps_interactive.pm_.c:675
-msgid "Installing"
-msgstr "Ag Feistiú"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Fan tamall, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:570
-msgid "Time remaining "
-msgstr "Am fagtha "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Am iomlán "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:675
-msgid "Preparing installation"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:618
-#, c-format
-msgid "Installing package %s"
-msgstr "Ag feistiál  pacáiste %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:695
-#: ../../install_steps_gtk.pm_.c:699
-msgid "Go on anyway?"
-msgstr "Lean ar aghaidh ar aon nós?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:695
-msgid "There was an error ordering packages:"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Bain úsáid as an cumraíocht X11 atá ann?"
-
-#: ../../install_steps_gtk.pm_.c:142
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Linux-Mandrake. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:156
-msgid "Please, choose one of the following classes of installation:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:222
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:224
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:229
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:235
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:237
-msgid "Percentage of packages to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:285 ../../install_steps_interactive.pm_.c:599
-msgid "Package Group Selection"
-msgstr "Roghnú Grúpa Pacáistí"
-
-#: ../../install_steps_gtk.pm_.c:305 ../../install_steps_interactive.pm_.c:614
-#, fuzzy
-msgid "Individual package selection"
-msgstr "Roghnú Grúpa Pacáistí"
-
-#: ../../install_steps_gtk.pm_.c:349
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "Expand Tree"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "Collapse Tree"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:418
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "Bad package"
-msgstr "Pacáiste mícheart"
-
-#: ../../install_steps_gtk.pm_.c:436
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ainm: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:439
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Tábhacht: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:448 ../../install_steps_interactive.pm_.c:578
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Méid iomlán: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:471
-#, fuzzy
-msgid "The following packages are going to be installed"
-msgstr "Roghnaigh pacáistí ..."
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "The following packages are going to be removed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:482
-msgid "You can't select/unselect this package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:501
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:507
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:510
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:563
-msgid "Estimating"
-msgstr "Ag meastú"
-
-#: ../../install_steps_gtk.pm_.c:582
-msgid "Please wait, preparing installation"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:613
-#, c-format
-msgid "%d packages"
-msgstr "%d pacáistí"
-
-#: ../../install_steps_gtk.pm_.c:652
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:680 ../../install_steps_interactive.pm_.c:163
-msgid "Accept"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:680 ../../install_steps_interactive.pm_.c:163
-#, fuzzy
-msgid "Refuse"
-msgstr "Athméidigh"
-
-#: ../../install_steps_gtk.pm_.c:681
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:699
-msgid "There was an error installing packages:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Tharla earráid"
-
-#: ../../install_steps_interactive.pm_.c:55
-msgid "Please, choose a language to use."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:56
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:68
-#: ../../install_steps_interactive.pm_.c:613
-msgid "All"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:86
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:87
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Linux-"
-"Mandrake distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Linux-Mandrake distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Linux-Mandrake sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:182
-#: ../../install_steps_interactive.pm_.c:822
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Eocharclár"
-
-#: ../../install_steps_interactive.pm_.c:183
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Cén leagan amach atá ar d'eocharchlársa"
-
-#: ../../install_steps_interactive.pm_.c:184
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:201
-msgid "Install Class"
-msgstr "Rann Feistiú"
-
-#: ../../install_steps_interactive.pm_.c:201
-msgid "Which installation class do you want?"
-msgstr "Cén rann feistiú atá uait?"
-
-#: ../../install_steps_interactive.pm_.c:203
-#, fuzzy
-msgid "Install/Update"
-msgstr "Feistiú"
-
-#: ../../install_steps_interactive.pm_.c:203
-#, fuzzy
-msgid "Is this an install or an update?"
-msgstr "Is iad an Feistigh nó tarrtháil ?"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Recommended"
-msgstr "Molta"
-
-#: ../../install_steps_interactive.pm_.c:215
-#: ../../install_steps_interactive.pm_.c:218
-msgid "Expert"
-msgstr "Saineolaí"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Update"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:238 ../../standalone/mousedrake_.c:41
-msgid "Please, choose the type of your mouse."
-msgstr "Cén cinéal luchóg atá agat?"
-
-#: ../../install_steps_interactive.pm_.c:244 ../../standalone/mousedrake_.c:57
-msgid "Mouse Port"
-msgstr "Gaireas luchóige"
-
-#: ../../install_steps_interactive.pm_.c:245 ../../standalone/mousedrake_.c:58
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:253
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:255
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:256
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:275
-msgid "Configuring PCMCIA cards..."
-msgstr "Cumraigh Cártaí PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:275
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:280
-msgid "Configuring IDE"
-msgstr "Ag cumraigh IDE"
-
-#: ../../install_steps_interactive.pm_.c:280
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:295
-msgid "no available partitions"
-msgstr "níl aon ranna saora ann"
-
-#: ../../install_steps_interactive.pm_.c:298
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:306
-msgid "Choose the mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:323
-#, fuzzy, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ni féidir liom an tábla rainn a léamh, tá máchaillí ann :(\n"
-"Leanfaidh mé orm ag cealú droch rainn"
-
-#: ../../install_steps_interactive.pm_.c:336
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Theip ar DiskDrake an tabla rainn a léamh i gceart.\n"
-"Lean ort, ar do phriacal féin!"
-
-#: ../../install_steps_interactive.pm_.c:361
-msgid "Root Partition"
-msgstr "Rann Fréamhach"
-
-#: ../../install_steps_interactive.pm_.c:362
-msgid "What is the root partition (/) of your system?"
-msgstr "Céard é an rann fréamhach (/) ded' chóras?"
-
-#: ../../install_steps_interactive.pm_.c:376
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Beidh ort an ríomhaire a aththosnú sula ndéanfar an athrú"
-
-#: ../../install_steps_interactive.pm_.c:403
-msgid "Choose the partitions you want to format"
-msgstr "Roghnaigh na ranna atá le formáidiú"
-
-#: ../../install_steps_interactive.pm_.c:404
-msgid "Check bad blocks?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Formatting partitions"
-msgstr "Ag formáidiú ranna"
-
-#: ../../install_steps_interactive.pm_.c:429
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:432
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nil dothain spas malartu chun insealbhu, chuir leis an spas"
-
-#: ../../install_steps_interactive.pm_.c:438
-msgid "Looking for available packages"
-msgstr "Ag curdach do na pacáistí atá ar fáil"
-
-#: ../../install_steps_interactive.pm_.c:444
-msgid "Finding packages to upgrade"
-msgstr "Ag cúrdach pacáistí le húasgrádú"
-
-#: ../../install_steps_interactive.pm_.c:461
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:480
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Críochnaithe (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:480
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Íosta (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:480
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Molta (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:486
-#, fuzzy
-msgid "Custom"
-msgstr "Socraithe"
-
-#: ../../install_steps_interactive.pm_.c:585
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:650
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:655
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:684
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Ag feisteáil pacáiste %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:693
-msgid "Post-install configuration"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:718
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid "Choose a mirror from which to get the packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:761
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:764
-msgid "Please choose the packages you want to install."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:776
-msgid "Which is your timezone?"
-msgstr "Cén ceann do chrois ama"
-
-#: ../../install_steps_interactive.pm_.c:778
-msgid "Is your hardware clock set to GMT?"
-msgstr "An bhfuil an clog cruaearrach ar GMT?"
-
-#: ../../install_steps_interactive.pm_.c:806 ../../printer.pm_.c:22
-#: ../../printerdrake.pm_.c:415
-msgid "Remote CUPS server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:807
-#, fuzzy
-msgid "No printer"
-msgstr "Ainm Printéir"
-
-#: ../../install_steps_interactive.pm_.c:821
-#, fuzzy
-msgid "Mouse"
-msgstr "Luchóg USB"
-
-#: ../../install_steps_interactive.pm_.c:823
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:824 ../../printerdrake.pm_.c:344
-msgid "Printer"
-msgstr "Printéir"
-
-#: ../../install_steps_interactive.pm_.c:826
-#, fuzzy
-msgid "ISDN card"
-msgstr "Carta ISDN inmheánamach"
-
-#: ../../install_steps_interactive.pm_.c:829
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:832
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:862
-msgid "Which printing system do you want to use?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:896
-msgid "No password"
-msgstr "Gan pasfhocal"
-
-#: ../../install_steps_interactive.pm_.c:901
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:907
-msgid "Use NIS"
-msgstr "Bain úsáid as NIS"
-
-#: ../../install_steps_interactive.pm_.c:907
-msgid "yellow pages"
-msgstr "leathanaigh buí"
-
-#: ../../install_steps_interactive.pm_.c:914
-msgid "Authentification NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:915
-msgid "NIS Domain"
-msgstr "Fearannas NIS"
-
-#: ../../install_steps_interactive.pm_.c:916
-msgid "NIS Server"
-msgstr "Freastalaí NIS"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "First floppy drive"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:968
-#, fuzzy
-msgid "Second floppy drive"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
-
-#: ../../install_steps_interactive.pm_.c:969
-msgid "Skip"
-msgstr "Scipeáil"
-
-#: ../../install_steps_interactive.pm_.c:974
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:983
-msgid "Sorry, no floppy drive available"
-msgstr "Brón orm, níl aon dioscthiománt flapach ar fáil"
-
-#: ../../install_steps_interactive.pm_.c:987
-#, fuzzy
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Roghnaigh na ranna atá le formáidiú"
-
-#: ../../install_steps_interactive.pm_.c:991
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid "Creating bootdisk"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1001
-#, fuzzy
-msgid "Preparing bootloader"
-msgstr "Feistigh córas"
-
-#: ../../install_steps_interactive.pm_.c:1010
-#, fuzzy
-msgid "Do you want to use aboot?"
-msgstr "Céard a theastaíonn uait a dhéanamh?"
-
-#: ../../install_steps_interactive.pm_.c:1013
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1038 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Bun"
-
-#: ../../install_steps_interactive.pm_.c:1039 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Gnáth"
-
-#: ../../install_steps_interactive.pm_.c:1040 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Árd"
-
-#: ../../install_steps_interactive.pm_.c:1044 ../../standalone/draksec_.c:49
-msgid "Choose security level"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1080
-msgid "Do you want to generate an auto install floppy for linux replication?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1082
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Cur isteach diosca folamh sa dioscthiomant %s"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "Creating auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1156
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1167
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Linux-"
-"Mandrake,\n"
-"consult the Errata available from http://www.linux-mandrake.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Linux-Mandrake User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1179
-#, fuzzy
-msgid "Generate auto install floppy"
-msgstr "Cruthaigh flapach bootáil"
-
-#: ../../install_steps_interactive.pm_.c:1181
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1186
-#, fuzzy
-msgid "Automated"
-msgstr "Uath-IP"
-
-#: ../../install_steps_interactive.pm_.c:1186
-#, fuzzy
-msgid "Replay"
-msgstr "Athlódaigh"
-
-#: ../../install_steps_interactive.pm_.c:1189
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Roghnú Grúpa Pacáistí"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Linux-Mandrake Installation %s"
-msgstr "Feistiú Linux-Mandrake %s"
-
-#: ../../install_steps_newt.pm_.c:33
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-
-#: ../../interactive.pm_.c:65
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:267
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:290
-msgid "Please wait"
-msgstr "Fan tamall"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Débhríoch (%s), bí níos cruinn\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Droch rogha, aththrialaigh\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (gnás %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Do rogha? (gnás %s)"
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Do rogha? (gnás %s úsáid `none' do ceann ar bith) "
-
-#: ../../keyboard.pm_.c:124 ../../keyboard.pm_.c:155
-msgid "Czech (QWERTZ)"
-msgstr "Ceichís (QWERTZ)"
-
-#: ../../keyboard.pm_.c:125 ../../keyboard.pm_.c:138 ../../keyboard.pm_.c:158
-msgid "German"
-msgstr "Gearmáinis"
-
-#: ../../keyboard.pm_.c:126
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:127 ../../keyboard.pm_.c:164
-msgid "Spanish"
-msgstr "Spáinnis"
-
-#: ../../keyboard.pm_.c:128 ../../keyboard.pm_.c:165
-msgid "Finnish"
-msgstr "Fionnlainnis"
-
-#: ../../keyboard.pm_.c:129 ../../keyboard.pm_.c:139 ../../keyboard.pm_.c:166
-msgid "French"
-msgstr "Francais"
-
-#: ../../keyboard.pm_.c:130 ../../keyboard.pm_.c:187
-msgid "Norwegian"
-msgstr "Ioruais"
-
-#: ../../keyboard.pm_.c:131
-msgid "Polish"
-msgstr "Polainnis"
-
-#: ../../keyboard.pm_.c:132 ../../keyboard.pm_.c:192
-msgid "Russian"
-msgstr "Ruislís"
-
-#: ../../keyboard.pm_.c:133 ../../keyboard.pm_.c:203
-msgid "UK keyboard"
-msgstr "Méarchlár UK"
-
-#: ../../keyboard.pm_.c:134 ../../keyboard.pm_.c:137 ../../keyboard.pm_.c:204
-msgid "US keyboard"
-msgstr "Meárchlár US"
-
-#: ../../keyboard.pm_.c:141
-msgid "Armenian (old)"
-msgstr "Airméinis (sean)"
-
-#: ../../keyboard.pm_.c:142
-#, fuzzy
-msgid "Armenian (typewriter)"
-msgstr "Airméinis (typewriter)"
-
-#: ../../keyboard.pm_.c:143
-#, fuzzy
-msgid "Armenian (phonetic)"
-msgstr "Airméinis (phonetic)"
-
-#: ../../keyboard.pm_.c:147
-msgid "Azerbaidjani (latin)"
-msgstr "Asarbaidseánais (laidin)"
-
-#: ../../keyboard.pm_.c:148
-#, fuzzy
-msgid "Azerbaidjani (cyrillic)"
-msgstr "Asarbaidseánais (cyrillic)"
-
-#: ../../keyboard.pm_.c:149
-msgid "Belgian"
-msgstr "Beilgeach"
-
-#: ../../keyboard.pm_.c:150
-msgid "Bulgarian"
-msgstr "Bulgáiris"
-
-#: ../../keyboard.pm_.c:151
-msgid "Brazilian (ABNT-2)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:152
-msgid "Belarusian"
-msgstr "Bealarúisis"
-
-#: ../../keyboard.pm_.c:153
-msgid "Swiss (German layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:154
-msgid "Swiss (French layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:156
-msgid "Czech (QWERTY)"
-msgstr "Ceichís (QWERTY)"
-
-#: ../../keyboard.pm_.c:157
-msgid "Czech (Programmers)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:159
-msgid "German (no dead keys)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:160
-msgid "Danish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:161
-msgid "Dvorak (US)"
-msgstr "Dvorak (Meiriceá)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Dvorak (Norwegian)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:163
-msgid "Estonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:167
-msgid "Georgian (\"Russian\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:168
-msgid "Georgian (\"Latin\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:169
-msgid "Greek"
-msgstr "Greicís"
-
-#: ../../keyboard.pm_.c:170
-msgid "Hungarian"
-msgstr "Ungáiris"
-
-#: ../../keyboard.pm_.c:171
-msgid "Croatian"
-msgstr "Cróitis"
-
-#: ../../keyboard.pm_.c:172
-msgid "Israeli"
-msgstr ""
-
-#: ../../keyboard.pm_.c:173
-msgid "Israeli (Phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174
-msgid "Iranian"
-msgstr "Peirsis"
-
-#: ../../keyboard.pm_.c:175
-msgid "Icelandic"
-msgstr "Íoslainnis"
-
-#: ../../keyboard.pm_.c:176
-msgid "Italian"
-msgstr "Iodáilis"
-
-#: ../../keyboard.pm_.c:177
-msgid "Japanese 106 keys"
-msgstr "Seapáinis (106 eochair)"
-
-#: ../../keyboard.pm_.c:178
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Méarchlár UK"
-
-#: ../../keyboard.pm_.c:179
-msgid "Latin American"
-msgstr ""
-
-#: ../../keyboard.pm_.c:180
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:181
-msgid "Dutch"
-msgstr "Ísiltíris"
-
-#: ../../keyboard.pm_.c:182
-msgid "Lithuanian AZERTY (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:184
-msgid "Lithuanian AZERTY (new)"
-msgstr "Liotuáinis AZERTY (nua)"
-
-#: ../../keyboard.pm_.c:185
-#, fuzzy
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Liotuáinis \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:186
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Liotuáinis \"phonetic\" QWERTY"
-
-#: ../../keyboard.pm_.c:188
-msgid "Polish (qwerty layout)"
-msgstr "Polainnis (qwerty)"
-
-#: ../../keyboard.pm_.c:189
-msgid "Polish (qwertz layout)"
-msgstr "Polainnis (qwertz)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Portuguese"
-msgstr "Portaingéilis"
-
-#: ../../keyboard.pm_.c:191
-msgid "Canadian (Quebec)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:193
-msgid "Russian (Yawerty)"
-msgstr "Rúisis (Yawerty)"
-
-#: ../../keyboard.pm_.c:194
-msgid "Swedish"
-msgstr "Sualainnis"
-
-#: ../../keyboard.pm_.c:195
-msgid "Slovenian"
-msgstr "Slóbhéinis"
-
-#: ../../keyboard.pm_.c:196
-msgid "Slovakian (QWERTZ)"
-msgstr "Slóbaicis (QWERTZ)"
-
-#: ../../keyboard.pm_.c:197
-msgid "Slovakian (QWERTY)"
-msgstr "Slóbaicis (QWERTY)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Slovakian (Programmers)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:199
-msgid "Thai keyboard"
-msgstr "Téalainnis"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Turkish (traditional \"F\" model)"
-msgstr "TUircis (traditional \"F\" model)"
-
-#: ../../keyboard.pm_.c:201
-#, fuzzy
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Tuircis (modern \"Q\" model)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Ukrainian"
-msgstr "Úcráinis"
-
-#: ../../keyboard.pm_.c:205
-msgid "US keyboard (international)"
-msgstr "Mearchlár US (idirnaisiúnta)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Bhítneamis"
-
-#: ../../keyboard.pm_.c:207
-msgid "Yugoslavian (latin/cyrillic)"
-msgstr ""
-
-#: ../../lvm.pm_.c:70
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Luchóg - Sun"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../mouse.pm_.c:32
-#, fuzzy
-msgid "Logitech MouseMan+"
-msgstr "Luchóg Bus Logitech"
-
-#: ../../mouse.pm_.c:33
-#, fuzzy
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Luchóg 3-cnaipe (PS/2)"
-
-#: ../../mouse.pm_.c:34
-#, fuzzy
-msgid "GlidePoint"
-msgstr "ALPS GlidePoint (PS/2)"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-#, fuzzy
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse (PS/2)"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-#, fuzzy
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse (PS/2)"
-
-#: ../../mouse.pm_.c:38
-#, fuzzy
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll (PS/2)"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Gnáth"
-
-#: ../../mouse.pm_.c:45
-#, fuzzy
-msgid "Wheel"
-msgstr "leibhéal"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr ""
-
-#: ../../mouse.pm_.c:50
-#, fuzzy
-msgid "Generic 2 Button Mouse"
-msgstr "Luchóg 3-cnaipe (PS/2)"
-
-#: ../../mouse.pm_.c:51
-#, fuzzy
-msgid "Generic 3 Button Mouse"
-msgstr "Luchóg 3-cnaipe (PS/2)"
-
-#: ../../mouse.pm_.c:52
-#, fuzzy
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse (PS/2)"
-
-#: ../../mouse.pm_.c:53
-#, fuzzy
-msgid "Logitech MouseMan"
-msgstr "Luchóg Bus Logitech"
-
-#: ../../mouse.pm_.c:54
-#, fuzzy
-msgid "Mouse Systems"
-msgstr "Mouse Systems (srathach)"
-
-#: ../../mouse.pm_.c:56
-#, fuzzy
-msgid "Logitech CC Series"
-msgstr "Luchóg Logitech CC (srathach)"
-
-#: ../../mouse.pm_.c:57
-#, fuzzy
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+ (PS/2)"
-
-#: ../../mouse.pm_.c:59
-#, fuzzy
-msgid "MM Series"
-msgstr "MM Series (srathach)"
-
-#: ../../mouse.pm_.c:60
-#, fuzzy
-msgid "MM HitTablet"
-msgstr "MM HitTablet (srathach)"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Luchóg Logitech (srathach, séan cinéal C7)"
-
-#: ../../mouse.pm_.c:65
-#, fuzzy
-msgid "busmouse"
-msgstr "Luchóg ar bith"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "ar bith"
-
-#: ../../mouse.pm_.c:74
-#, fuzzy
-msgid "No mouse"
-msgstr "Luchóg ar bith"
-
-#: ../../my_gtk.pm_.c:356
-#, fuzzy
-msgid "Finish"
-msgstr "Fionnlainnis"
-
-#: ../../my_gtk.pm_.c:356
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:357
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:617
-msgid "Is this correct?"
-msgstr "An bhfuil seo ceart?"
-
-#: ../../netconnect.pm_.c:143
-msgid "Internet configuration"
-msgstr "Cumraigh Idirlíon"
-
-#: ../../netconnect.pm_.c:144
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../netconnect.pm_.c:148
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../netconnect.pm_.c:154 ../../standalone/draknet_.c:196
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../netconnect.pm_.c:155
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../netconnect.pm_.c:156 ../../standalone/draknet_.c:196
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-
-#: ../../netconnect.pm_.c:161 ../../netconnect.pm_.c:904
-#: ../../netconnect.pm_.c:934 ../../netconnect.pm_.c:1012
-msgid "Network Configuration"
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../netconnect.pm_.c:222 ../../netconnect.pm_.c:266
-#: ../../netconnect.pm_.c:276 ../../netconnect.pm_.c:283
-#: ../../netconnect.pm_.c:293
-msgid "ISDN Configuration"
-msgstr "Cumraigh ISDN"
-
-#: ../../netconnect.pm_.c:222
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../netconnect.pm_.c:236
-#, fuzzy
-msgid "Connection Configuration"
-msgstr "Cumraíocht Idirlíon."
-
-#: ../../netconnect.pm_.c:237
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../netconnect.pm_.c:239 ../../standalone/draknet_.c:552
-msgid "Card IRQ"
-msgstr "IRQ na Carta"
-
-#: ../../netconnect.pm_.c:240 ../../standalone/draknet_.c:553
-msgid "Card mem (DMA)"
-msgstr "Cuimhne Charta (DMA)"
-
-#: ../../netconnect.pm_.c:241 ../../standalone/draknet_.c:554
-msgid "Card IO"
-msgstr "I/A Carta"
-
-#: ../../netconnect.pm_.c:242 ../../standalone/draknet_.c:555
-msgid "Card IO_0"
-msgstr "I/A_0 Carta"
-
-#: ../../netconnect.pm_.c:243 ../../standalone/draknet_.c:556
-msgid "Card IO_1"
-msgstr "I/A_1 Carta"
-
-#: ../../netconnect.pm_.c:244 ../../standalone/draknet_.c:557
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../netconnect.pm_.c:245 ../../standalone/draknet_.c:558
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:246 ../../standalone/draknet_.c:559
-msgid "Provider phone number"
-msgstr "Uimhir fón"
-
-#: ../../netconnect.pm_.c:247
-msgid "Provider dns 1"
-msgstr ""
-
-#: ../../netconnect.pm_.c:248
-msgid "Provider dns 2"
-msgstr ""
-
-#: ../../netconnect.pm_.c:249 ../../standalone/draknet_.c:564
-msgid "Dialing mode"
-msgstr ""
-
-#: ../../netconnect.pm_.c:250 ../../standalone/draknet_.c:562
-msgid "Account Login (user name)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:251 ../../standalone/draknet_.c:563
-msgid "Account Password"
-msgstr "Pasfhocal"
-
-#: ../../netconnect.pm_.c:261
-#, fuzzy
-msgid "Europe"
-msgstr "Eorap (EDS11)"
-
-#: ../../netconnect.pm_.c:261
-msgid "Europe (EDSS1)"
-msgstr "Eorap (EDS11)"
-
-#: ../../netconnect.pm_.c:263
-#, fuzzy
-msgid "Rest of the world"
-msgstr "Trialaigh an cumraíocht"
-
-#: ../../netconnect.pm_.c:263
-msgid ""
-"Rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:267
-msgid "Which protocol do you want to use ?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:277
-msgid "What kind of card do you have?"
-msgstr "Cén cinéal c atá uait?"
-
-#: ../../netconnect.pm_.c:278
-msgid "I don't know"
-msgstr "Níl fhíos agam"
-
-#: ../../netconnect.pm_.c:278
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../netconnect.pm_.c:278
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../netconnect.pm_.c:284
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:288
-msgid "Abort"
-msgstr "Tobscoir"
-
-#: ../../netconnect.pm_.c:288
-msgid "Continue"
-msgstr "Lean"
-
-#: ../../netconnect.pm_.c:294
-msgid "Which is your ISDN card ?"
-msgstr "Cén sort carta ISDN atá uait?"
-
-#: ../../netconnect.pm_.c:314
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../netconnect.pm_.c:323
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../netconnect.pm_.c:371
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../netconnect.pm_.c:375 ../../standalone/drakgw_.c:232
-msgid "Choose the network interface"
-msgstr "Roghnaigh an cláréadan ghréasán"
-
-#: ../../netconnect.pm_.c:376
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-
-#: ../../netconnect.pm_.c:385 ../../netconnect.pm_.c:700
-#: ../../netconnect.pm_.c:845 ../../standalone/drakgw_.c:223
-msgid "Network interface"
-msgstr "Cláréadan Gréasán"
-
-#: ../../netconnect.pm_.c:386
-msgid ""
-"\n"
-"Do you agree?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:386
-#, fuzzy
-msgid "I'm about to restart the network device:\n"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../netconnect.pm_.c:484
-msgid "ADSL configuration"
-msgstr "Cumraigh ADSL"
-
-#: ../../netconnect.pm_.c:485
-#, fuzzy
-msgid "Do you want to start your connection at boot?"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../netconnect.pm_.c:620
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-
-#: ../../netconnect.pm_.c:625
-msgid "Dialup options"
-msgstr "Roghanna 'Dialup'"
-
-#: ../../netconnect.pm_.c:626 ../../standalone/draknet_.c:566
-msgid "Connection name"
-msgstr "Ainm Nasc"
-
-#: ../../netconnect.pm_.c:627 ../../standalone/draknet_.c:567
-msgid "Phone number"
-msgstr "Uimhir fón"
-
-#: ../../netconnect.pm_.c:628 ../../standalone/draknet_.c:568
-msgid "Login ID"
-msgstr "Ainm Login:"
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Authentication"
-msgstr "Deimniú"
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Script-based"
-msgstr "Script-bhunaithe"
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Terminal-based"
-msgstr "Teirminéal-bhunaithe"
-
-#: ../../netconnect.pm_.c:631 ../../standalone/draknet_.c:571
-msgid "Domain name"
-msgstr "Ainm Fearannas"
-
-#: ../../netconnect.pm_.c:632 ../../standalone/draknet_.c:572
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Cead Freastalaí DNS"
-
-#: ../../netconnect.pm_.c:633 ../../standalone/draknet_.c:573
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Dara Freastalaí DNS"
-
-#: ../../netconnect.pm_.c:701
-msgid ""
-"I'm about to restart the network device $netc->{NET_DEVICE}. Do you agree?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:745
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../netconnect.pm_.c:745 ../../netconnect.pm_.c:748
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../netconnect.pm_.c:745
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../netconnect.pm_.c:748
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-
-#: ../../netconnect.pm_.c:748
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../netconnect.pm_.c:752 ../../standalone/net_monitor_.c:81
-#, fuzzy
-msgid "Connect to Internet"
-msgstr "Bainteach le hIdirlíon"
-
-#: ../../netconnect.pm_.c:754
-#, fuzzy
-msgid "Disconnect from Internet"
-msgstr "Bainteach le hIdirlíon"
-
-#: ../../netconnect.pm_.c:756
-#, fuzzy
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../netconnect.pm_.c:759
-msgid "Internet connection & configuration"
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../netconnect.pm_.c:811 ../../netconnect.pm_.c:961
-#: ../../netconnect.pm_.c:971 ../../netconnect.pm_.c:986
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../netconnect.pm_.c:812
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "Móideam seantrach"
-
-#: ../../netconnect.pm_.c:812
-msgid "Internal ISDN card"
-msgstr "Carta ISDN inmheánamach"
-
-#: ../../netconnect.pm_.c:812
-msgid "What kind is your ISDN connection?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:833 ../../netconnect.pm_.c:882
-msgid "Connect to the Internet"
-msgstr ""
-
-#: ../../netconnect.pm_.c:834
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../netconnect.pm_.c:836
-#, fuzzy
-msgid "use dhcp"
-msgstr "dhcpd"
-
-#: ../../netconnect.pm_.c:836
-msgid "use pppoe"
-msgstr "úsáid pppoe"
-
-#: ../../netconnect.pm_.c:836
-#, fuzzy
-msgid "use pptp"
-msgstr "úsáid pppoe"
-
-#: ../../netconnect.pm_.c:846
-#, fuzzy, c-format
-msgid "I'm about to restart the network device %s. Do you agree?"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../netconnect.pm_.c:883
-#, fuzzy
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "Cén sort iontráil a suimigh do?"
-
-#: ../../netconnect.pm_.c:900
-#, fuzzy
-msgid "Network configuration"
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../netconnect.pm_.c:901
-#, fuzzy
-msgid "Do you want to restart the network"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../netconnect.pm_.c:904
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../netconnect.pm_.c:935
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:962
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:964
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Roghnagih an úsáidoer gneás:"
-
-#: ../../netconnect.pm_.c:965
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../netconnect.pm_.c:971 ../../printerdrake.pm_.c:19
-msgid "Detecting devices..."
-msgstr ""
-
-#: ../../netconnect.pm_.c:978
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../netconnect.pm_.c:978
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Pointe taca dublach %s"
-
-#: ../../netconnect.pm_.c:979
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../netconnect.pm_.c:979
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../netconnect.pm_.c:980
-#, fuzzy
-msgid "DSL (or ADSL) connection"
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../netconnect.pm_.c:980
-#, fuzzy, c-format
-msgid "detected on interface %s"
-msgstr "Cláréadan Gréasán"
-
-#: ../../netconnect.pm_.c:981
-#, fuzzy
-msgid "Cable connection"
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../netconnect.pm_.c:982
-#, fuzzy
-msgid "LAN connection"
-msgstr "Cumraigh ADSL"
-
-#: ../../netconnect.pm_.c:982
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../netconnect.pm_.c:987
-msgid "How do you want to connect to the Internet?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:1004
-msgid ""
-"Congratulation, The network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system."
-msgstr ""
-
-#: ../../netconnect.pm_.c:1007
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-
-#: ../../network.pm_.c:253
-msgid "no network card found"
-msgstr "ní fuaireathas cárta gréasánú"
-
-#: ../../network.pm_.c:277 ../../network.pm_.c:387
-msgid "Configuring network"
-msgstr "Cumraigh gréasánú"
-
-#: ../../network.pm_.c:278
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-
-#: ../../network.pm_.c:282 ../../network.pm_.c:392
-msgid "Host name"
-msgstr "Óstainm"
-
-#: ../../network.pm_.c:319
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network.pm_.c:324
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-
-#: ../../network.pm_.c:333 ../../network.pm_.c:334
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Ag cumrú gléas gréasánú %s"
-
-#: ../../network.pm_.c:334
-msgid " (driver $module)"
-msgstr ""
-
-#: ../../network.pm_.c:336 ../../standalone/draknet_.c:231
-#: ../../standalone/draknet_.c:427
-msgid "IP address"
-msgstr "Seoladh IP"
-
-#: ../../network.pm_.c:337 ../../standalone/draknet_.c:428
-msgid "Netmask"
-msgstr ""
-
-#: ../../network.pm_.c:338
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network.pm_.c:338
-msgid "Automatic IP"
-msgstr "Uath-IP"
-
-#: ../../network.pm_.c:359 ../../printerdrake.pm_.c:102
-#: ../../printerdrake.pm_.c:425
-msgid "IP address should be in format 1.2.3.4"
-msgstr ""
-
-#: ../../network.pm_.c:388
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-
-#: ../../network.pm_.c:393
-msgid "DNS server"
-msgstr "freastalaí DNS"
-
-#: ../../network.pm_.c:394 ../../standalone/draknet_.c:565
-msgid "Gateway"
-msgstr "Inneal Geata"
-
-#: ../../network.pm_.c:396
-msgid "Gateway device"
-msgstr "Gaireas na hInneal Geata"
-
-#: ../../network.pm_.c:407
-msgid "Proxies configuration"
-msgstr "Cumraigh seach-freastalaí"
-
-#: ../../network.pm_.c:408
-msgid "HTTP proxy"
-msgstr "Seach-HTTP"
-
-#: ../../network.pm_.c:409
-msgid "FTP proxy"
-msgstr "Seach-FTP"
-
-#: ../../network.pm_.c:412
-msgid "Proxy should be http://..."
-msgstr ""
-
-#: ../../network.pm_.c:413
-msgid "Proxy should be ftp://..."
-msgstr ""
-
-#: ../../partition_table.pm_.c:563
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:581
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-
-#: ../../partition_table.pm_.c:675
-#, c-format
-msgid "Error reading file %s"
-msgstr "Earráid ag léamh comhad %s"
-
-#: ../../partition_table.pm_.c:682
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr ""
-
-#: ../../partition_table.pm_.c:684
-msgid "Bad backup file"
-msgstr "Droch comhad chúltaca"
-
-#: ../../partition_table.pm_.c:706
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Earráidh ag scríobh comhad %s"
-
-#: ../../partition_table_raw.pm_.c:161
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "riachtanas"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "tábhachtach"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "an-dheas"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "deas"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "b'fhéidir"
-
-#: ../../printer.pm_.c:20
-msgid "Local printer"
-msgstr "Printéir áitiúl"
-
-#: ../../printer.pm_.c:21
-#, fuzzy
-msgid "Remote printer"
-msgstr "Scrios iontráil"
-
-#: ../../printer.pm_.c:23
-msgid "Remote lpd server"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "Network printer (socket)"
-msgstr "Printéir Gréasán (soicéad)"
-
-#: ../../printer.pm_.c:25
-msgid "SMB/Windows 95/98/NT"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:26
-msgid "NetWare"
-msgstr "NetWare"
-
-#: ../../printer.pm_.c:27 ../../printerdrake.pm_.c:158
-#: ../../printerdrake.pm_.c:160
-msgid "Printer Device URI"
-msgstr "URI Gaireas Printéir"
-
-#: ../../printerdrake.pm_.c:19
-msgid "Test ports"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:40
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:52
-msgid "Local Printer Device"
-msgstr "Gaireas na Printéir Áitiúl"
-
-#: ../../printerdrake.pm_.c:53
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:55
-msgid "Printer Device"
-msgstr "Gaireas Printéir"
-
-#: ../../printerdrake.pm_.c:74
-msgid "Remote lpd Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:75
-msgid ""
-"To use a remote lpd print queue, you need to supply\n"
-"the hostname of the printer server and the queue name\n"
-"on that server which jobs should be placed in."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:78
-msgid "Remote hostname"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:79
-msgid "Remote queue"
-msgstr "Scrios ciú"
-
-#: ../../printerdrake.pm_.c:88
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Roghanna Printéir SMB (Fuinneoga 9x/NT)"
-
-#: ../../printerdrake.pm_.c:89
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:94
-msgid "SMB server host"
-msgstr "freastalaí óstann SMB"
-
-#: ../../printerdrake.pm_.c:95
-msgid "SMB server IP"
-msgstr "IP freastalaí SMP"
-
-#: ../../printerdrake.pm_.c:96
-msgid "Share name"
-msgstr "Comh. ainm"
-
-#: ../../printerdrake.pm_.c:99
-msgid "Workgroup"
-msgstr "Grupa na hOibre"
-
-#: ../../printerdrake.pm_.c:124
-msgid "NetWare Printer Options"
-msgstr "Roghanna Printéir NetWare"
-
-#: ../../printerdrake.pm_.c:125
-msgid ""
-"To print to a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:129
-msgid "Printer Server"
-msgstr "Freastalaí Printéir"
-
-#: ../../printerdrake.pm_.c:130
-msgid "Print Queue Name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:142
-msgid "Socket Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:143
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"hostname of the printer and optionally the port number."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:145
-msgid "Printer Hostname"
-msgstr "Óstainm Printéir"
-
-#: ../../printerdrake.pm_.c:146 ../../printerdrake.pm_.c:422
-msgid "Port"
-msgstr "Poirt"
-
-#: ../../printerdrake.pm_.c:159
-msgid "You can specify directly the URI to access the printer with CUPS."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:192 ../../printerdrake.pm_.c:244
-msgid "What type of printer do you have?"
-msgstr "Cén sort printéir atá ort?"
-
-#: ../../printerdrake.pm_.c:204 ../../printerdrake.pm_.c:305
-#, fuzzy
-msgid "Do you want to test printing?"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../printerdrake.pm_.c:207 ../../printerdrake.pm_.c:316
-msgid "Printing test page(s)..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:214 ../../printerdrake.pm_.c:324
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer daemon.\n"
-"This may take a little time before printer start.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-"Does it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:218 ../../printerdrake.pm_.c:328
-msgid ""
-"Test page(s) have been sent to the printer daemon.\n"
-"This may take a little time before printer start.\n"
-"Does it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:234
-msgid "Yes, print ASCII test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:235
-msgid "Yes, print PostScript test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:236
-msgid "Yes, print both test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:243
-msgid "Configure Printer"
-msgstr "Cumraigh Printéir"
-
-#: ../../printerdrake.pm_.c:273
-msgid "Printer options"
-msgstr "Roghanna Printéir"
-
-#: ../../printerdrake.pm_.c:274
-msgid "Paper Size"
-msgstr "Méid Páipéir"
-
-#: ../../printerdrake.pm_.c:275
-msgid "Eject page after job?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:280
-msgid "Uniprint driver options"
-msgstr "Roghanna tiománaí Uniprint"
-
-#: ../../printerdrake.pm_.c:281
-msgid "Color depth options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:283
-msgid "Print text as PostScript?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:285
-msgid "Fix stair-stepping text?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:287
-msgid "Number of pages per output pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:288
-msgid "Right/Left margins in points (1/72 of inch)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:289
-msgid "Top/Bottom margins in points (1/72 of inch)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:291
-msgid "Extra GhostScript options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:293
-msgid "Extra Text options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:295
-msgid "Reverse page order"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:345
-msgid "Would you like to configure a printer?"
-msgstr "An dteastaìonn uait printéir a chumrú?"
-
-#: ../../printerdrake.pm_.c:351
-msgid ""
-"Here are the following print queues.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:370
-#, fuzzy
-msgid "CUPS starting"
-msgstr "Ag meastú"
-
-#: ../../printerdrake.pm_.c:370
-msgid "Reading CUPS drivers database..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:384 ../../printerdrake.pm_.c:450
-#: ../../printerdrake.pm_.c:471 ../../printerdrake.pm_.c:479
-msgid "Select Printer Connection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:385 ../../printerdrake.pm_.c:472
-msgid "How is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:392
-#, fuzzy
-msgid "Select Remote Printer Connection"
-msgstr "Nasc Printéir"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"With a remote CUPS server, you do not have to configure\n"
-"any printer here; printers will be automatically detected.\n"
-"In case of doubt, select \"Remote CUPS server\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-"With a remote CUPS server, you do not have to configure\n"
-"any printer here; printers will be automatically detected\n"
-"unless you have a server on a different network; in the\n"
-"latter case, you have to give the CUPS server IP address\n"
-"and optionally the port number."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "IP freastalaí SMP"
-
-#: ../../printerdrake.pm_.c:429
-msgid "Port number should be numeric"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:451 ../../printerdrake.pm_.c:480
-msgid "Remove queue"
-msgstr "Scrios ciú"
-
-#: ../../printerdrake.pm_.c:454
-msgid ""
-"Name of printer should contains only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:461
-msgid ""
-"Every printer need a name (for example lp).\n"
-"Other parameters such as the description of the printer or its location\n"
-"can be defined. What name should be used for this printer and\n"
-"how is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:465
-msgid "Name of printer"
-msgstr "Ainm Printéir"
-
-#: ../../printerdrake.pm_.c:466
-msgid "Description"
-msgstr "Cuntas"
-
-#: ../../printerdrake.pm_.c:467
-msgid "Location"
-msgstr "Áit"
-
-#: ../../printerdrake.pm_.c:482
-msgid ""
-"Every print queue (which print jobs are directed to) needs a\n"
-"name (often lp) and a spool directory associated with it. What\n"
-"name and directory should be used for this queue and how is the printer "
-"connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:489
-msgid "Name of queue"
-msgstr "Ainm ciú"
-
-#: ../../printerdrake.pm_.c:490
-msgid "Spool directory"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:491
-msgid "Printer Connection"
-msgstr "Nasc Printéir"
-
-#: ../../raid.pm_.c:33
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-
-#: ../../raid.pm_.c:103
-msgid "Can't write file $file"
-msgstr ""
-
-#: ../../raid.pm_.c:128
-msgid "mkraid failed"
-msgstr "teip ar 'mkraid'"
-
-#: ../../raid.pm_.c:128
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr ""
-
-#: ../../raid.pm_.c:144
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:17
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-
-#: ../../services.pm_.c:18
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: ../../services.pm_.c:20
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:22
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: ../../services.pm_.c:25
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: ../../services.pm_.c:28
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:30
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-
-#: ../../services.pm_.c:32
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: ../../services.pm_.c:36
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:44
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:46
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: ../../services.pm_.c:48
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:52
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:54
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:56
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:61
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:64
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:67
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:70
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-
-#: ../../services.pm_.c:72
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:74
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:79
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:83
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:85
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:86
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:88
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:89
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-
-#: ../../services.pm_.c:118
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "running"
-msgstr "Rabhadh"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "stopped"
-msgstr "Append"
-
-#: ../../services.pm_.c:151
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:156
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:163
-#, fuzzy
-msgid "On boot"
-msgstr "Root"
-
-#: ../../standalone/diskdrake_.c:67
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ni féidir liom an tábla rainn a léamh, tá máchaillí ann :(\n"
-"Leanfaidh mé orm ag cealú droch rainn"
-
-#: ../../standalone/drakgw_.c:37 ../../standalone/drakgw_.c:180
-msgid "Internet Connection Sharing"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:118
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:119
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:123
-#, fuzzy
-msgid "disable"
-msgstr "Table"
-
-#: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148
-#, fuzzy
-msgid "reconfigure"
-msgstr "Cumraigh X"
-
-#: ../../standalone/drakgw_.c:126
-msgid "Disabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:134
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../standalone/drakgw_.c:143
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:144
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:148
-#, fuzzy
-msgid "enable"
-msgstr "Table"
-
-#: ../../standalone/drakgw_.c:155
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:160
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../standalone/drakgw_.c:168
-msgid "Config file content could not be interpreted."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-msgid "Unrecognized config file"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:181
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:207
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:208
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "suimiúil"
-
-#: ../../standalone/drakgw_.c:216
-msgid "No network adapter on your system!"
-msgstr "Níl aon gaireas ghreasán san do chorás!"
-
-#: ../../standalone/drakgw_.c:217
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:224
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:233
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:242
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid "Potential LAN address conflict found in current config of $_!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:261 ../../standalone/drakgw_.c:267
-msgid "Firewalling configuration detected!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:276
-#, fuzzy
-msgid "Configuring..."
-msgstr "Ag cumraigh IDE"
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:307
-#, fuzzy
-msgid "Problems installing package $_"
-msgstr "Ag feistiál  pacáiste %s"
-
-#: ../../standalone/drakgw_.c:590
-msgid "Congratulations!"
-msgstr "Comhghairdeas!"
-
-#: ../../standalone/drakgw_.c:591
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:608
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:609
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:610
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../standalone/drakgw_.c:615
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../standalone/drakgw_.c:622
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:59
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../standalone/draknet_.c:66 ../../standalone/draknet_.c:539
-msgid "Profile: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:74
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:108
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:114
-msgid "Name of the profile to create:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:140
-#, fuzzy
-msgid "Hostname: "
-msgstr "Ainm úsáideora"
-
-#: ../../standalone/draknet_.c:147
-#, fuzzy
-msgid "Internet access"
-msgstr "suimiúil"
-
-#: ../../standalone/draknet_.c:160
-#, fuzzy
-msgid "Type:"
-msgstr "Cineál: "
-
-#: ../../standalone/draknet_.c:163 ../../standalone/draknet_.c:354
-msgid "Gateway:"
-msgstr "Inneal Geata:"
-
-#: ../../standalone/draknet_.c:163 ../../standalone/draknet_.c:354
-#, fuzzy
-msgid "Interface:"
-msgstr "suimiúil"
-
-#: ../../standalone/draknet_.c:168
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:170 ../../standalone/draknet_.c:357
-#: ../../standalone/net_monitor_.c:122 ../../standalone/net_monitor_.c:224
-#, fuzzy
-msgid "Connected"
-msgstr "Ainm Nasc"
-
-#: ../../standalone/draknet_.c:170 ../../standalone/draknet_.c:357
-#: ../../standalone/net_monitor_.c:83 ../../standalone/net_monitor_.c:122
-#: ../../standalone/net_monitor_.c:224
-#, fuzzy
-msgid "Not connected"
-msgstr "Cumraigh ADSL"
-
-#: ../../standalone/draknet_.c:173 ../../standalone/draknet_.c:358
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:173 ../../standalone/draknet_.c:358
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:191
-#, fuzzy
-msgid "Starting your connection..."
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../standalone/draknet_.c:199
-#, fuzzy
-msgid "Closing your connection..."
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../standalone/draknet_.c:204
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-
-#: ../../standalone/draknet_.c:207
-#, fuzzy
-msgid "The system is now disconnected."
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../standalone/draknet_.c:219
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Cumraigh seirbhisí"
-
-#: ../../standalone/draknet_.c:226 ../../standalone/draknet_.c:411
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Cumraigh ADSL"
-
-#: ../../standalone/draknet_.c:231
-msgid "Adapter"
-msgstr ""
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "Driver"
-msgstr "Freastalaí"
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "Interface"
-msgstr "suimiúil"
-
-#: ../../standalone/draknet_.c:231
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:250
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Cumraigh gréasánú áitiúl"
-
-#: ../../standalone/draknet_.c:283
-msgid "Normal Mode"
-msgstr ""
-
-#: ../../standalone/draknet_.c:288
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:307
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Trialaigh an cumraíocht"
-
-#: ../../standalone/draknet_.c:391
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:415
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "Cumraigh ADSL"
-
-#: ../../standalone/draknet_.c:423
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:429
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:430
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:466 ../../standalone/draknet_.c:470
-#, fuzzy
-msgid "Disable"
-msgstr "Table"
-
-#: ../../standalone/draknet_.c:466 ../../standalone/draknet_.c:470
-#, fuzzy
-msgid "Enable"
-msgstr "Table"
-
-#: ../../standalone/draknet_.c:504
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:528
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../standalone/draknet_.c:532
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../standalone/draknet_.c:541
-#, fuzzy
-msgid "Connection type: "
-msgstr "Ainm Nasc"
-
-#: ../../standalone/draknet_.c:547
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-#, fuzzy
-msgid "Provider dns 1 (optional)"
-msgstr "Roghanna Printéir"
-
-#: ../../standalone/draknet_.c:561
-#, fuzzy
-msgid "Provider dns 2 (optional)"
-msgstr "Roghanna Printéir"
-
-#: ../../standalone/draknet_.c:574
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:575
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr ""
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Bocht"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranóid"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-
-#: ../../standalone/draksec_.c:52
-msgid "Setting security level"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:44
-#, fuzzy
-msgid "Control Center"
-msgstr "Bainteach le hIdirlíon"
-
-#: ../../standalone/drakxconf_.c:45
-msgid "Choose the tool you want to use"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:23
-#, fuzzy
-msgid "Change Cd-Rom"
-msgstr "Athraigh Réiteach"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:50
-msgid "no serial_usb found\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:54
-msgid "Emulate third button?"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:131
-msgid "Test the mouse here."
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:40 ../../standalone/net_monitor_.c:52
-#, fuzzy
-msgid "Network Monitoring"
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../standalone/net_monitor_.c:56
-msgid "Statistics"
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:59
-msgid "Sending Speed: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:61
-msgid "Receiving Speed: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:66
-#, fuzzy
-msgid "Close"
-msgstr "Luchóg USB"
-
-#: ../../standalone/net_monitor_.c:100 ../../standalone/net_monitor_.c:104
-#, fuzzy
-msgid "Connecting to Internet "
-msgstr "Bainteach le hIdirlíon"
-
-#: ../../standalone/net_monitor_.c:100 ../../standalone/net_monitor_.c:104
-#, fuzzy
-msgid "Disconnecting from Internet "
-msgstr "Bainteach le hIdirlíon"
-
-#: ../../standalone/net_monitor_.c:114
-#, fuzzy
-msgid "Disconnection from Internet failed."
-msgstr "Bainteach le hIdirlíon"
-
-#: ../../standalone/net_monitor_.c:115
-#, fuzzy
-msgid "Disconnection from Internet complete."
-msgstr "Bainteach le hIdirlíon"
-
-#: ../../standalone/net_monitor_.c:117
-#, fuzzy
-msgid "Connection complete."
-msgstr "Ainm Nasc"
-
-#: ../../standalone/net_monitor_.c:118
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:188
-msgid "sent: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:191
-msgid "received: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:222
-#, fuzzy
-msgid "Connect"
-msgstr "Ainm Nasc"
-
-#: ../../standalone/net_monitor_.c:222
-#, fuzzy
-msgid "Disconnect"
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../standalone/tinyfirewall_.c:29
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../standalone/tinyfirewall_.c:42
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:10
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Linux Mandrake machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:15
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:22
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:27
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:32
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:37
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:42
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:47
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:52
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:57
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:62
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:67
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:83
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:85
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Earráid ag oscailt %s do scríobh: %s"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Development"
-msgstr "Forbairt"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "Stáisiún Oibre"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Graphics"
-msgstr "Ilmheánach"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet"
-msgstr "suimiúil"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Printéir Gréasán (soicéad)"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Cumraigh Idirlíon"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Oifig"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Ilmheánach"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Doiciméid KDE agus Mandrake"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Sound"
-msgstr "Ilmheánach"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Stáisiún Oibre"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Games"
-msgstr "Gnome"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Video"
-msgstr "Ilmheánach"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Printéir Gréasán (soicéad)"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "Stáisiún Oibre"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - CD Burning"
-msgstr "Ilmheánach"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "X freastalaí"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "cumraíocht"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "KDE Workstation"
-msgstr "Stáisiún Oibre"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "Stáisiún Oibre"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "suimiúil"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Doiciméid KDE agus Mandrake"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#~ msgid "%d minutes"
-#~ msgstr "%d noiméaid"
-
-#~ msgid "1 minute"
-#~ msgstr "1 noiméad"
-
-#~ msgid "%d seconds"
-#~ msgstr "%d soicínd"
-
-#, fuzzy
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "Cumraigh ADSL"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Roghnaigh Comhad"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Cumraigh nasc ghréasán"
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "Ag cumraigh IDE"
-
-#, fuzzy
-#~ msgid "Standard tools"
-#~ msgstr "Forbairt"
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "cumraíocht"
-
-#, fuzzy
-#~ msgid "Boot style configuration"
-#~ msgstr "Trialaigh an cumraíocht"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Cumraigh LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Cruthaigh flapach bootáil"
-
-#~ msgid "Format floppy"
-#~ msgstr "Formadaigh flapach"
-
-#~ msgid "Choice"
-#~ msgstr "Rogha"
-
-#, fuzzy
-#~ msgid "gMonitor"
-#~ msgstr "Scáileán"
-
-#, fuzzy
-#~ msgid "Internet/Network access"
-#~ msgstr "suimiúil"
-
-#, fuzzy
-#~ msgid "Mail information"
-#~ msgstr "Taispeán Eolas"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Eile"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Ceisteanna eile"
-
-#, fuzzy
-#~ msgid "Actions"
-#~ msgstr "Áit"
-
-#, fuzzy
-#~ msgid "toot"
-#~ msgstr "Root"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Cead Freastalaí DNS"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Dara Freastalaí DNS"
-
-#, fuzzy
-#~ msgid "using module"
-#~ msgstr "Luchóg ar bith"
-
-#, fuzzy
-#~ msgid "Development, Database"
-#~ msgstr "Forbairt"
-
-#~ msgid "None"
-#~ msgstr "Ar bith"
-
-#, fuzzy
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Cén tescán ag a dteastaíonn uait é a bhogadh?"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Déan iarracht móideam a aimsiú?"
-
-#, fuzzy
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Cumraigh nasc ghréasán"
-
-#~ msgid "Configure local network"
-#~ msgstr "Cumraigh gréasánú áitiúl"
-
-#, fuzzy
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#, fuzzy
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr "Tá gréasánú lóganta cumraithe cheana féin. An dteastaíonn uait:"
-
-#, fuzzy
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Ag cumraigh IDE"
-
-#~ msgid "Multimedia"
-#~ msgstr "Ilmheánach"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#, fuzzy
-#~ msgid "Internet Tools"
-#~ msgstr "Cumraigh Idirlíon"
-
-#, fuzzy
-#~ msgid "Development C/C++"
-#~ msgstr "Forbairt"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Cumraigh crios ama"
-
-#~ msgid "Configure printer"
-#~ msgstr "Cumraigh printéir"
-
-#, fuzzy
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Printéir Gréasán (soicéad)"
-
-#, fuzzy
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "Athraigh cumraíocht an freastalaí"
-
-#, fuzzy
-#~ msgid "Enable num lock at startup"
-#~ msgstr "X ag tús"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Pasfhocal (arís)"
-
-#~ msgid "Gateway device:"
-#~ msgstr "Gaireas na hInneal Geata:"
-
-#, fuzzy
-#~ msgid "default"
-#~ msgstr "Gnáth"
-
-#, fuzzy
-#~ msgid "What is your system used for?"
-#~ msgstr "Cén ceann do chrois ama"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Úsáid diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "Socraithe"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Bain úsáid as scáilcomhad"
-
-#~ msgid "shadow"
-#~ msgstr "scáil"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Bain úsáid as pasfhocail MD5"
-
-#~ msgid "Search"
-#~ msgstr "Cuardaigh"
-
-#~ msgid "Package"
-#~ msgstr "Pacáiste"
-
-#~ msgid "Text"
-#~ msgstr "Teacs"
-
-#~ msgid "Tree"
-#~ msgstr "Crann"
-
-#~ msgid "Category"
-#~ msgstr "Saghas"
-
-#~ msgid "See"
-#~ msgstr "Amharc"
-
-#~ msgid "Installed packages"
-#~ msgstr "Pacáistí feistiú"
-
-#~ msgid "Available packages"
-#~ msgstr "Pacáistí le fáil"
-
-#~ msgid "Remove"
-#~ msgstr "Scríos"
-
-#~ msgid "Find Package"
-#~ msgstr "Cuardaigh Pacáiste"
-
-#~ msgid "Uninstall"
-#~ msgstr "Eirigh as Feistiú"
-
-#~ msgid "Choose package to install"
-#~ msgstr "Roghnaigh pacáistí a feistiú ..."
-
-#~ msgid "Wait"
-#~ msgstr "Fan tamall"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "%s not found"
-#~ msgstr "Teip ag cuardach %s"
-
-#~ msgid "Directory"
-#~ msgstr "Fillteán"
-
-#~ msgid "France"
-#~ msgstr "Fraince"
-
-#~ msgid "Other countries"
-#~ msgstr "Tír Eile"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "móideim alcatel"
-
-#~ msgid "ECI modem"
-#~ msgstr "móideim ECI"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "ná úsáid pppoe"
-
-#~ msgid "mandatory"
-#~ msgstr "sainordaitheach"
-
-#~ msgid "interesting"
-#~ msgstr "suimiúil"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (tábhachtach)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (an-dheas)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (deas)"
-
-#~ msgid "Czech"
-#~ msgstr "Ceichís"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slóbaicis"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Athchumraigh an gréasánú anois"
-
-#, fuzzy
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Bainteach le hIdirlíon"
-
-#, fuzzy
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Bainteach le hIdirlíon"
-
-#, fuzzy
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Bainteach le hIdirlíon"
-
-#, fuzzy
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Bainteach le hIdirlíon"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Uath-Réiteach"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Uath-cuardaigh réiteach"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Feistiú/Tarrtháil"
-
-#~ msgid "Rescue"
-#~ msgstr "Tarrtháil"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Luchóg ADB Apple"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Luchóg ADB Apple (2 Cnaipí)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Luchóg Apple ADB (3+ Cnaipí)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Luchóg USB  Apple"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Luchóg USB Apple (2 Cnaipí)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Luchóg USB  Apple (3+ Cnaipí)"
-
-#~ msgid "Generic Mouse (PS/2)"
-#~ msgstr "Mouse Gnáth (PS/2)"
-
-#~ msgid "Logitech MouseMan/FirstMouse (ps/2)"
-#~ msgstr "Logitech MouseMan/FirstMouse (ps/2)"
-
-#~ msgid "ASCII MieMouse (PS/2)"
-#~ msgstr "ASCII MieMouse (PS/2)"
-
-#~ msgid "Genius NetMouse Pro (PS/2)"
-#~ msgstr "Genius NetMouse Pro (PS/2)"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "Luchóg Bus ATI"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Luchóg Bus Microsoft"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "Luchóg USB (3 cnaipí nó níos mó)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A nó barr (srathach)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (srathach)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (srathach)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (srathach)"
-
-#~ msgid "Microsoft IntelliMouse (serial)"
-#~ msgstr "Microsoft IntelliMouse (srathach)"
-
-#~ msgid "Logitech MouseMan/FirstMouse (serial)"
-#~ msgstr "Logitech MouseMan/FirstMouse (srathach)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Luchóg de gnáth (srathach)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft nó comhoriúnach (srathach)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Luchóg 3-cnaipe de gnáth (srathach)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (srathach)"
-
-#~ msgid "CHAP"
-#~ msgstr "CHAP"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Céard a theastaíonn uait a dhéanamh?"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-client"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Cén cinéal luchóg atá agat?"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Rúnscríobhach"
-
-#~ msgid "Configure LAN"
-#~ msgstr "Cumraigh LAN"
-
-#~ msgid "End configuration"
-#~ msgstr "Éirigh  as cumraíocht"
-
-#, fuzzy
-#~ msgid "Do not set up networking"
-#~ msgstr "Cumraigh gréasánú"
-
-#, fuzzy
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "An dteastaíonn uait gréasánú a chumrú ded' chóras?"
-
-#~ msgid "Show less"
-#~ msgstr "Taispéan níos lú"
-
-#~ msgid "Show more"
-#~ msgstr "Taispeán níos mo"
diff --git a/perl-install/share/po/gl.po b/perl-install/share/po/gl.po
deleted file mode 100644
index bd89c56e0..000000000
--- a/perl-install/share/po/gl.po
+++ /dev/null
@@ -1,9687 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999, 2000 Mandrakesoft.
-# Copyright (C) 2000 Jesús Bravo Álvarez.
-# José Manuel Cambre <asforber@asforber.com>, 1999
-# Jesús Bravo Álvarez <jba@pobox.com>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2000-06-08 18:14+0200\n"
-"Last-Translator: Jesús Bravo Álvarez (mdk) <jba@pobox.com>\n"
-"Language-Team: Galician <trasno@ceu.fi.udc.es>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:232
-#, fuzzy
-msgid "Use Xinerama extension"
-msgstr "Usar detección automática"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:238
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "lendo a configuración"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Tarxeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Seleccione unha tarxeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Escolla un servidor X"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "Servidor X"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "¿Que configuración de XFree quere usar?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A súa tarxeta pode ter soporte de aceleración 3D por hardware, pero só con\n"
-"XFree %s. A tarxeta está soportada por XFree %s, que pode ter un mellor\n"
-"soporte en 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"A súa tarxeta pode ter soporte de aceleración 3D por hardware con XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s con aceleración 3D por hardware"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"A súa tarxeta pode ter soporte de aceleración 3D por hardware, pero só con\n"
-"XFree %s, ADVIRTA QUE ESTE SOPORTE É EXPERIMENTAL E PODE COLGAR O SISTEMA."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s con aceleración 3D por hardware EXPERIMENTAL"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A súa tarxeta pode ter soporte de aceleración 3D por hardware, pero só con\n"
-"XFree %s, ADVIRTA QUE ESTE SOPORTE É EXPERIMENTAL E PODE COLGAR O SISTEMA.\n"
-"A súa tarxeta está soportada por XFree %s, que pode ter un mellor soporte en "
-"2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "Configuración de XFree"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Seleccione a cantidade de memoria da tarxeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Escolla as opcións para o servidor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Escolla o monitor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Os dous parámetros críticos son a taxa de actualización vertical, que\n"
-"indica a frecuencia coa que a pantalla completa é actualizada, e máis\n"
-"importante aínda é a taxa de sincronismo horizontal, que é a\n"
-"frecuencia coa que se mostran as liñas de barrido horizontal.\n"
-"\n"
-"É MOI IMPORTANTE que non especifique un tipo de monitor cun intervalo\n"
-"de frecuencias de sincronismo superior á capacidade real do seu monitor,\n"
-"xa que pode danalo.\n"
-"No caso de dúbida, escolla unha configuración conservadora."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Frecuencia de actualización horizontal"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Frecuencia de actualización vertical"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "O monitor non está configurado"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "A tarxeta gráfica aínda non está configurada"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Resolucións aínda non escollidas"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "¿Desexa probar a configuración?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Aviso: probar esta tarxeta gráfica pode colgar o ordenador"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Proba da configuración"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"probe a cambiar algúns parámetros"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Ocorreu un erro:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Saíndo en %d segundos"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "¿É esta a configuración correcta?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ocorreu un erro, probe a cambiar algúns parámetros"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Resolución"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Escolla a resolución e a profundidade de cor"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Tarxeta gráfica: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Servidor XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Modo experto"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Ver todo"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Resolucións"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Disposición do teclado: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo de rato: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo do rato: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frecuencia horizontal do monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Frecuencia vertical do monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Tarxeta gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Tarxeta gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memoria da tarxeta gráfica: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profundidade de cor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolución: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Controlador de XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Preparando a configuración de X-Window"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "¿Qué desexa facer?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Mudar o monitor"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Mudar a tarxeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Mudar as opcións do servidor"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Mudar a resolución"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Mostrar información"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Probar de novo"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Saír"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"¿Manter os cambios?\n"
-"A configuración actual é:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Entre de novo en %s para activar os cambios"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Saia da sesión e use Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "Lanzar X11 ó arrincar"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Pódese configurar o seu ordenador para que entre automaticamente\n"
-"en X ó arrincar. ¿Desexa que se execute X ó reiniciar?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 cores (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil cores (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil cores (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 millóns de cores (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 mil millóns de cores (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB ou máis"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA estándar, 640x480 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatible 8514, 1024x768 a 87 Hz entrelazado (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz entrelazado, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA estendido, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA non-entrelazado, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA alta-frecuencia, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Monitor multi-frecuencia soportando 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Monitor multi-frecuencia soportando 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Monitor multi-frecuencia soportando 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor soportando 1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor soportando 1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Primeiro sector da partición de arranque"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Primeiro sector do disco (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "Instalación do SILO"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "¿Onde quere instalar o cargador de arrinque?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "Instalación do LILO/grub"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO con menú de texto"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO con menú gráfico"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Arrincar dende DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Opcións principais do cargador de arrinque"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Cargador de arrinque que usar"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Instalación do cargador de arrinque"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Dispositivo de arrinque"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (non funciona en BIOS antigas)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Compacto"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "compacto"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Modo de vídeo"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Retardo antes de arrincar a imaxe por omisión"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Contrasinal"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Contrasinal (de novo)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Restrinxir opcións da liña de comandos"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "restrinxir"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Baleirar /tmp en cada arrinque"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Tamaño exacto de memoria se for necesario (atopáronse %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Activar perfís múltiples"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Indicar o tamaño da memoria en MB"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"A opción ``restrinxir opcións da liña de comandos'' non ten sentido sen "
-"contrasinal"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Tente de novo"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Os contrasinais non coinciden"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Mensaxe inicial"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "¿Permitir o arrinque de CD?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "¿SO por omisión?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Estas son as diferentes entradas.\n"
-"Pode engadir algunhas máis ou cambiar as que xa existen."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Engadir"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Feito"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Modificar"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "¿Que tipo de entrada desexa engadir?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Outros SO (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Outros SO (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Outros SO (windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Imaxe"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Raíz"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Agregar"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Lectura-escritura"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Táboa"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Inseguro"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Etiqueta"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Por omisión"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr ""
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Quitar entrada"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Etiqueta baleira non permitida"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Esta etiqueta xa se está a usar"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s interfaces %s atopadas"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "¿Ten algunha outra?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "¿Ten algunha interface %s?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Non"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Si"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Mire a información sobre o hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalando o controlador para a tarxeta %s %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(módulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "¿Que controlador de %s desexa probar?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Nalgúns casos, o controlador de %s necesita información extra\n"
-"para funcionar correctamente, aínda que normalmente funcione sen ela.\n"
-"¿Desexa especificar información extra para o controlador ou deixar que el\n"
-"analice o seu equipo e atope a información que necesita? Ás veces,\n"
-"analizar o equipo pode provocar que se pare, pero non debería\n"
-"causar ningún dano."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Autodetección"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Especificar as opcións"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Agora pode indicar as opcións para o módulo %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Aquí deben ir as diferentes opcións para o módulo %s.\n"
-"As opcións son da forma «nome=valor nome2=valor2 ...».\n"
-"Por exemplo pode ter «io=0x300 irq=7»"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Opcións do módulo:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Fallo o cargar o módulo %s\n"
-"¿Desexa retentalo con outros parámetros?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s xa foi engadido)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Este contrasinal é demasiado simple"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Indique o nome de usuario"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "O nome de usuario (login) só debe conter letras, números, '-' e '_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Este nome de usuario xa está engadido"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Engadir usuario"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introduza un usuario\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Aceptar usuario"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Nome real"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Nome de usuario"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Icona"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Login automático"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Pódese configurar o ordenador para que se autentique automaticamente\n"
-"como un usuario.  Se non quere usar esta característica, prema o botón\n"
-"cancelar."
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Escolla o usuario por defecto:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Escolla o xestor de fiestras para executar:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Escolla a lingua que desexe usar."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "Pode escoller outras linguas que estarán dispoñibles trala instalación"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Todas"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Benvido ao %s, o selector de sistema operativo!\n"
-"\n"
-"Escolla un sistema operativo na lista de enriba, ou\n"
-"agarde %d segundos para que se arrinque o sistema por defecto.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "­Benvido ao GRUB, o selector de sistemas operativos!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use as teclas %c e %c para seleccionar a entrada marcada."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Prema enter para arrincar o SO seleccionado, 'e' para editar os"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "comandos antes de arrincar, ou 'c' para a li¤a de comandos."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "A entrada marcada arrincarase automaticamente en %d segundos."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "non hai espacio dabondo en /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Escritorio"
-
-# Manter o 'ú' en iso-8859-1
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Menú Inicio"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "¿Onde quere instalar o cargador de arrinque?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "axuda aínda non implementada.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuración do estilo de arrinque"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Ficheiro"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Ficheiro/_Saír"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Monitor"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Mudar o monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:100
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Modo de marcación"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-#, fuzzy
-msgid "Configure"
-msgstr "Configurar as X"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Modo de arrinque"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Lanzar o sistema X-Window ó iniciar"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Non, non quero login automático"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Si, quero login automático con este (usuario, escritorio)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "Aceptar"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "non se pode abrir /etc/inittab para lectura: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Fallou a instalación do LILO. Ocorreu o erro seguinte:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutos"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d segundos"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Faga primeiro unha copia de seguridade dos seus datos"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "¡Lea coidadosamente!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Se ten pensado usar aboot, teña coidado de deixar un espacio libre (2048\n"
-"sectores abondan) no inicio do disco"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Erro"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Axudante"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Novo"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "Quitar"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Punto de montaxe"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Opcións"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Desmontar"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Montar"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Escolla a acción"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Ten unha partición FAT grande\n"
-"(xeralmente usada por Microsoft Dos/Windows).\n"
-"Aconséllase que primeiro a redimensione\n"
-"(prema nela, e logo en \"Redimensionar\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Prema nunha partición"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Prema nunha partición"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Prema nunha partición"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Detalles"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "mount fallou"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Intercambio"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Baleiro"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Outros"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Tipos de sist. de ficheiros:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Crear"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Use ``%s'' no seu lugar"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Borrar"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Use ``Desmontar'' primeiro"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Ó mudar o tipo da partición %s, perderanse tódolos datos desta partición"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "¿Onde desexa montar o dispositivo %s?"
-
-#: ../../diskdrake.pm_.c:500
-#, fuzzy
-msgid "Mount options"
-msgstr "Opcións do módulo:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:525
-#, fuzzy
-msgid "Removable media"
-msgstr "Automonta-las unidades extraíbles"
-
-#: ../../diskdrake.pm_.c:532
-#, fuzzy
-msgid "Change type"
-msgstr "Mudar o tipo de partición"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "¿Qué sistema de ficheiros desexa?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Servidor"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Escolla a acción"
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Crear unha nova partición"
-
-#: ../../diskdrake_interactive.pm_.c:188
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Mudar a modo experto"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Mudar a modo normal"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Refacer"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "¿Continuar de calquera xeito?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Saír sen gardar"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "¿Saír do programa sen gardar a táboa de particións?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "¿Desexa probar a configuración?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Asignación automática"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Borrar todas"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Máis"
-
-#: ../../diskdrake_interactive.pm_.c:250
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Información do correo"
-
-#: ../../diskdrake_interactive.pm_.c:267
-#, fuzzy
-msgid "Not enough space for auto-allocating"
-msgstr "Non hai espacio libre dabondo para asignar novas particións"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Tódalas particións primarias están usadas"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Non é posible engadir máis particións"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Para ter máis particións, borre unha para poder crear unha partición "
-"estendida"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Escribir táboa de particións"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Táboa de particións de rescate"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Táboa de particións de rescate"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Táboa de particións de rescate"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Automonta-las unidades extraíbles"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Seleccione un ficheiro"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"A táboa de particións de rescate non ten\n"
-"o mesmo tamaño.  ¿Continuar de calquera xeito?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Advertencia"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Insira un disquete na unidade\n"
-"Perderanse tódolos datos no disquete"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Tentando recuperar a táboa de particións de rescate"
-
-#: ../../diskdrake_interactive.pm_.c:340
-#, fuzzy
-msgid "Detailed information"
-msgstr "Información do correo"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Redimensionar"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Desprazar"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formatar"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Activar"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Engadir ó RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Engadir ó LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Quitar do RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Quitar do LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Modificar o RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Usar para loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Crear unha nova partición"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Sector inicial: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Tamaño en MB: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Tipo de sist. de ficheiros: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Punto de montaxe: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Preferencia: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatando o ficheiro loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Mudar o tipo de partición"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "¿Onde desexa montar o ficheiro loopback %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Non se pode quitar o punto de montaxe porque esta partición estase a\n"
-"usar de loopback.\n"
-"Quite primeiro o loopback"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Calculando os límites do sistema de ficheiros FAT"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Redimensionando"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Esta partición non se pode redimensionar"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Debería facer unha copia de seguridade dos datos desta partición"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Ó redimensionar a partición %s, perderanse tódolos datos desta partición"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Escoller o novo tamaño"
-
-#: ../../diskdrake_interactive.pm_.c:591
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Tamaño en MB: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "¿A que disco desexa desprazala?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "¿A que sector desexa desprazala?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Desprazando"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Desprazando partición..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Escolla un dos RAID para engadirlle"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "novo"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Escolla un dos LVM para engadirlle"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "¿Nome do LVM?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Esta partición non pode usarse para loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Nome do ficheiro loopback: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nome real"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "O ficheiro xa está a ser usado por outro loopback, escolla outro"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "O ficheiro xa existe. ¿Usalo?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "dispositivo"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "nivel"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "tamaño do bloque de datos"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Teña coidado: esta operación é perigosa."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "¿Qué tipo de particionamento quere?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Desculpe, mais non se pode crear o directorio /boot tan lonxe no disco\n"
-"(nun cilindro > 1024). Se usa o LILO, non funcionará, e se non o\n"
-"usa, non necesita /boot"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"A partición que escolleu para usar como raíz (/) está fisicamente ubicada\n"
-"despois do cilindro 1024 do disco duro, e non ten partición /boot.\n"
-"Se pensa usar o selector de SO de arrinque LILO, lembre engadir unha\n"
-"partición /boot"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Seleccionou unha partición RAID software como raíz (/).\n"
-"Non hai ningún cargador de arrinque que funcione deste xeito sen unha\n"
-"partición /boot.\n"
-"Lembre polo tanto engadir unha partición /boot"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "¡Escribirase ó disco a táboa de particións da unidade %s!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Necesitará reiniciar o equipo para que a modificación sexa tomada en conta"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Ó formatar a partición %s, perderanse tódolos datos desta partición"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Formatando"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatando o ficheiro loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatando a partición %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid fallou"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Non hai espacio libre dabondo para asignar novas particións"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Non hai espacio libre dabondo para asignar novas particións"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Resolución: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Dispositivo: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Letra de unidade DOS: %s (aproximación)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Tipo: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Nome: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Inicio: sector %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Tamaño: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectores"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Cilindro %d a cilindro %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Formatado\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Non formatado\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Montado\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Ficheiro(s) loopback: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partición de arrinque por omisión\n"
-"    (para arrincar en MS-DOS, non para lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivel %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Tamaño do bloque de datos %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discos RAID %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nome do ficheiro loopback: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Tamaño: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Xeometría: %s cilindros, %s cabezas, %s sectores\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discos LVM %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo de táboa de particións: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "no bus %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Opcións: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "O formato %s de %s fallou"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Descoñécese o xeito de formatar %s de tipo %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "mount fallou"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "mount fallou: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "erro desmontando %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simple"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servidor"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Non pode usar JFS para particións máis pequenas que 16MB"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Non pode usar ReiserFS para particións máis pequenas que 32MB"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Os puntos de montaxe deben empezar por /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Xa existe unha partición co punto de montaxe %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Non pode usar un volume lóxico LVM para o punto de montaxe %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Este directorio debería permanecer dentro do sistema de ficheiros raíz"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Necesita un sistema de ficheiros real (ext2, reiserfs) para este punto de "
-"montaxe\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Erro ó abrir %s para escritura: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ocorreu un erro - non se atopou ningún dispositivo válido para crear novos "
-"sistemas de ficheiros. Verifique o seu equipo para ver a razón deste problema"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "¡Non ten ningunha partición!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Agora poderá escoller que servicios quere que sexan arrincados ó inicio.\n"
-"Cando o seu rato pasa por riba dun elemento, unha pequena axuda aparecerá\n"
-"describindo o cometido do servicio.\n"
-"\n"
-"Sexa especialmente coidadoso neste paso se pretende utiliza-la súa máquina\n"
-"coma un servidor: probablemente non quererá iniciar servicios que non "
-"precisa."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"Linux xestiona a hora en GMT ou \"Hora do Meridiano de Greenwich\", e a\n"
-"traslada á hora local dependendo da zona que vostede escolla."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-#, fuzzy
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Neste punto, ten que escoller onde quere instalar o sistema operativo\n"
-"Mandrake Linux no disco duro. Se está baleiro, ou se hai outro sistema\n"
-"ocupando todo o espacio dispoñible, terá que particionalo. Basicamente,\n"
-"particionar un disco duro consiste en dividilo loxicamente para crear o\n"
-"espacio para instalar o seu novo sistema Mandrake Linux.\n"
-"\n"
-"\n"
-"Como os efectos do proceso de particionamento son normalmente "
-"irreversibles,\n"
-"o particionamento pode intimidar e resultar estresante para un usuario\n"
-"non experimentado.\n"
-"Este axudante simplifica o proceso. Antes de continuar, consulte o\n"
-"manual e tome o seu tempo.\n"
-"\n"
-"\n"
-"Necesita polo menos dúas particións. Unha é para o propio sistema operativo\n"
-"e a outra é para a memoria virtual (tamén chamada Intercambio ou Swap).\n"
-"\n"
-"\n"
-"Se as particións xa foron definidas (nunha instalación previa ou con outra\n"
-"ferramenta de particionamento), simplemente terá que escoller cales delas\n"
-"usar no seu sistema Linux.\n"
-"\n"
-"\n"
-"Se as particións aínda non foron definidas, terá que crealas. Para facelo,\n"
-"use o axudante dispoñible enriba. Dependendo da configuración do seu disco\n"
-"duro, hai varias solucións dispoñibles:\n"
-"\n"
-"* Usar a partición existente: o axudante detectou unha ou máis particións de "
-"Linux existentes no seu disco duro. Se\n"
-"  quere mantelas, escolla esta opción.\n"
-"\n"
-"\n"
-"* Borrar o disco completo: Se quere borrar tódolos datos e tódalas "
-"particións existentes no disco duro e substituílas\n"
-"  polo seu novo sistema Mandrake Linux, pode escoller esta opción. Teña "
-"coidado con esta solución, xa que non poderá\n"
-"  reverter o proceso despois de confirmar.\n"
-"\n"
-"\n"
-"* Usar o espacio libre na partición de Windows: se Microsoft Windows está "
-"instalado no seu disco duro e ocupa todo o espacio\n"
-"  dispoñible, ten que crear espacio libre para o Linux. Para facelo, pode "
-"borrar a partición de\n"
-"  Microsoft Windows e os datos (mire \"Borrar o disco completo\" ou as "
-"solucións do \"Modo experto\"), ou redimensionar\n"
-"  a partición de Microsoft Windows. O redimensionamento pódese realizar sen "
-"perda de datos. Esta solución é\n"
-"  a recomendada se quere usar Mandrake Linux e Microsoft Windows no mesmo "
-"ordenador.\n"
-"\n"
-"\n"
-"  Antes de escoller esta solución, advirta que o tamaño da súa partición de "
-"Microsoft Windows\n"
-"  será máis pequeno do que é agora. Isto significa que terá menos espacio "
-"libre en Microsoft Windows para\n"
-"  almacenar os seus datos ou instalar novo software.\n"
-"\n"
-"\n"
-"* Modo experto: se quere particionar manualmente o seu disco duro, pode "
-"escoller esta opción. Teña coidado\n"
-"  ó escoller esta solución. É potente pero moi perigosa. Pode perder os seus "
-"datos moi facilmente. Polo tanto,\n"
-"  non a escolla a menos que saiba o que está a facer."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Por favor, sexa paciente. Esta operación pode levar varios minutos."
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Escolla \"Instalar\" se non hai ningunha versión previa de Mandrake Linux\n"
-"instalada ou se quere usar varios sistemas operativos.\n"
-"\n"
-"\n"
-"Escolla \"Actualizar\" se quere actualizar unha versión xa instalada de\n"
-"Mandrake Linux.\n"
-"\n"
-"\n"
-"Dependendo do seu coñecemento de GNU/Linux, pode escoller un dos seguintes\n"
-"niveis para instalar ou actualizar o seu sistema operativo Mandrake Linux:\n"
-"\n"
-"* Recomendada: se nunca instalou un sistema operativo GNU/Linux, escolla\n"
-"isto. A instalación será moi\n"
-"  sinxela e apenas se lle preguntarán unhas poucas cuestións.\n"
-"\n"
-"\n"
-"* Personalizada: se ten familiaridade dabondo con GNU/Linux, pode escoller o "
-"uso principal (estación de traballo,\n"
-"  servidor, desenvolvemento) do seu sistema. Terá que responder a máis "
-"cuestións que na clase de instalación\n"
-"  \"Recomendada\", polo que necesitará saber como funciona GNU/Linux para "
-"escoller esta opción.\n"
-"\n"
-"\n"
-"* Experto: se ten un bo coñecemento de GNU/Linux, pode escoller esta clase "
-"de instalación. Do mesmo xeito que en\n"
-"  \"Personalizada\", poderá escoller o uso principal (estación de traballo, "
-"servidor, desenvolvemento). Teña\n"
-"  moito coidado ó escoller este nivel. Vaille permitir facer unha "
-"instalación altamente personalizada.\n"
-"  Responder algunhas cuestións pode ser moi difícil se non ten un bo "
-"coñecemento de GNU/Linux. Polo tanto, non\n"
-"  escolla esta clase de instalación a menos que saiba o que está a facer."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Seleccione o porto correcto. Por exemplo, o porto\n"
-"COM1 en MS Windows chámase ttyS0 en GNU/Linux."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (O LInux LOader) e Grub son cargadores de arrinque: poden arrincar\n"
-"Linux ou outro sistema operativo presente no seu ordenador.\n"
-"Normalmente, estes outros sitemas son detectados correctamente e "
-"instalados.\n"
-"Se non é o caso, pode engadir unha entrada a man nesta pantalla. Sexa\n"
-"coidadoso na escolla dos parámetros correctos.\n"
-"\n"
-"\n"
-"Tamén pode non querer dar acceso a eses outros sitemas operativos a "
-"calquera,\n"
-"poidendo borrar as entradas correspondentes. Pero neste caso, precisará\n"
-"un disquete de arrinque para poder usalos."
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Debe indicar onde desexa poñer a información\n"
-"necesaria para arrincar Linux.\n"
-"\n"
-"\n"
-"A menos que sepa exactamente o que fai, elixa sempre\n"
-"\"Primeiro sector do disco (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Insira un disquete formatado con FAT na unidade %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Para usar esta selección de paquetes gardada, arrinque a instalación con "
-"``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Erro lendo o ficheiro %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Aceptar"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Algún hardware do seu ordenador necesita controladores ``propietarios''\n"
-"para funcionar. Pode atopar máis información sobre eles en: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Ten que ter unha partición raíz.\n"
-"Para iso, faga unha partición (ou prema nunha que xa exista).\n"
-"Entón escolla a acción ``Punto de montaxe'', e asócieo a `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Debe ter unha partición de intercambio"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Non dispón de partición de intercambio\n"
-"\n"
-"¿Desexa continuar de calquera xeito?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Debe ter unha partición de intercambio"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Usar espacio libre"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Non hai espacio libre dabondo para asignar novas particións"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Usar partición existente"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Non hai ningunha partición existente para usar"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Usar a partición de Windows para loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "¿Que partición desexa usar para Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Escolla os tamaños"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Tamaño da partición raíz en MB: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Tamaño da partición de intercambio en MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Usar o espacio libre da partición de Windows"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "¿Que partición desexa redimensionar?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Calculando os límites do sistema de ficheiros de Windows"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"O redimensionador de FAT non é capaz de manexar a súa partición,\n"
-"ocorreu o seguinte erro: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"A partición de Windows está demasiado fragmentada, execute primeiro o "
-"``defrag''"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"¡AVISO!\n"
-"\n"
-"O DrakX vai agora redimensionar a partición de Windows. Teña coidado:\n"
-"esta operación é perigosa. Se aínda non o fixo, debería executar primeiro\n"
-"o scandisk no Windows (e opcionalmente o defrag), e reiniciar a "
-"instalación.\n"
-"Tamén é aconsellable facer unha copia de seguridade dos seus datos.\n"
-"Cando estea seguro, prema Aceptar."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "¿Que tamaño desexa manter para o Windows en"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "partición %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "O redimensionamento da FAT fallou: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Non hai particións FAT para redimensionar ou para usar como loopback (ou non "
-"hai espacio libre dabondo)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Borrar o disco completo"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Borrar Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Ten máis dunha unidade de disco duro, ¿en cal delas desexa instalar linux?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Perderanse TODAS as particións existentes e os seus datos na unidade %s"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Particionamento de disco personalizado"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Usar fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Pode agora particionar %s.\n"
-"Cando remate, non esqueza gravar usando `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Non ten espacio libre dabondo na partición de Windows"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Non se pode atopar espacio para a instalación"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "O axudante de particionamento do DrakX atopou as seguintes solucións:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "O particionamento fallou: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Activando a rede"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Desactivando a rede"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ocorreu un erro, e o programa non sabe como manexalo de\n"
-"maneira limpa. Continúe ó seu propio risco."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Punto de montaxe %s duplicado"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Algúns paquetes importantes non se instalaron correctamente.\n"
-"A unidade de cdrom ou o cdrom están defectuosos.\n"
-"Comprobe o cdrom nun ordenador xa instalado usando \"rpm -qpl Mandrake/RPMS/"
-"*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Benvido a %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Ningunha disqueteira dispoñible"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entrando na etapa '%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Escolla o tamaño que quere instalar"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Tamaño total: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versión: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tamaño: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Escolla os paquetes que desexa instalar"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Info"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Instalar"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Instalando"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Agarde, por favor, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Tempo restante "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Tempo total "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Preparando a instalación"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalando o paquete %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "¿Seguir adiante?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Houbo un erro ó ordenar os paquetes:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "¿Usar a configuración existente para X11?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"O seu sistema ten poucos recursos. Pode que teña algún problema\n"
-"instalando Mandrake Linux. Se iso acontece, pode tentar unha instalación\n"
-"en modo texto.  Para iso, prema 'F1' cando arrinque o CDROM, e escriba\n"
-"'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Clase de instalación"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Escolla unha das seguintes clases de instalación:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "O tamaño total dos grupos que seleccionou é aproximadamente %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Se quere instalar menos deste tamaño,\n"
-"seleccione a porcentaxe de paquetes que desexe.\n"
-"\n"
-"Unha porcentaxe baixa instalará só os paquetes máis importantes;\n"
-"unha porcentaxe dun 100%% instalará tódolos paquetes seleccionados."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Ten espacio no seu disco para unicamente o %d%% destes paquetes.\n"
-"\n"
-"Se desexa instalar menos ca isto,\n"
-"seleccione a porcentaxe de paquetes que quere instalar.\n"
-"Unha porcentaxe baixa instalará só os paquetes máis importantes;\n"
-"unha porcentaxe de %d%% instalará tódolos paquetes posibles."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Vostede poderá escollelos máis especificamente na seguinte etapa."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Porcentaxe de paquetes a instalar"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Selección dos grupos de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Selección individual de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tamaño total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Paquete erróneo"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nome: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importancia: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Non pode seleccionar este paquete xa que non hai espacio dabondo para "
-"instalalo"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Vanse instalar os seguintes paquetes"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Vanse eliminar os seguintes paquetes"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Non pode seleccionar/deseleccionar este paquete"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Este é un paquete obrigatorio, non se pode deseleccionar"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Non pode deseleccionar este paquete. Xa está instalado"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Este paquete ten que ser actualizado\n"
-"¿Está seguro de que quere deseleccionalo?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Non pode deseleccionar este paquete. Ten que ser actualizado"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:460
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Gardar nun disquete"
-
-#: ../../install_steps_gtk.pm_.c:461
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Gardar a selección de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Minimal install"
-msgstr "Desinstalar"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Estimando"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Por favor, agarde, preparando a instalación"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d paquetes"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Aceptar"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Rexeitar"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"¡Mude o Cd-Rom!\n"
-"\n"
-"Por favor, insira o Cd-Rom etiquetado \"%s\" na unidade e prema Aceptar. Se "
-"non o ten, prema Cancelar para omitir a instalación deste Cd-Rom."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Houbo un erro ó instalar os paquetes:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Ocorreu un erro"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Acordo da licencia"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teclado"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Escolla a disposición do seu teclado."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Esta é a lista completa de teclados dispoñibles"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "¿Qué clase de instalación desexa?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Instalar/Actualizar"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "¿É isto unha instalación ou unha actualización?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Recomendada"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Experto"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Actualización"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Escolla o seu tipo de rato."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Porto do rato"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Escolla o porto serie onde está conectado o seu rato."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Configurando tarxetas PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Configurando o IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "ningunha partición dispoñible"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Examinando as particións para atopar os puntos de montaxe"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Seleccione os puntos de montaxe"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Non se pode ler a táboa de particións, está demasiado deteriorada :(\n"
-"Pódese probar baleirando as particións erróneas (¡Perderanse TODOS os "
-"datos!).\n"
-"A outra solución é impedir que o DrakX modifique a táboa de particións.\n"
-"(o erro é %s)\n"
-"\n"
-"¿Concorda coa perda de tódalas particións?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"O DiskDrake non puido ler correctamente a táboa de particións.\n"
-"¡Continúe ó seu propio risco!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:349
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Elixa as particións que desexa formatar"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Partición raíz"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "¿Cal é a partición raíz (/) do seu sistema?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Necesita reiniciar o equipo para que a modificación da táboa\n"
-"de particións se tome en conta"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Elixa as particións que desexa formatar"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "¿Comprobar os bloques erróneos?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Formatando as particións"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Creando e formatando o ficheiro %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Non hai espacio de intercambio dabondo para finalizar a instalación,\n"
-"por favor, engada algún"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Buscando os paquetes dispoñibles"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Atopando os paquetes para actualizar"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"O seu sistema non ten espacio libre dabondo para a instalación ou "
-"actualización (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completo (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Mínimo (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomendado (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Personalizado"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:525
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Restaurar a partir dun disquete"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Restaurar a partir dun disquete"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Package selection"
-msgstr "Selección dos grupos de paquetes"
-
-#: ../../install_steps_interactive.pm_.c:532
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Insira un disquete na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Gardar nun disquete"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se ten tódolos CDs na lista inferior, prema Aceptar.\n"
-"Se non ten ningún deses CDs, prema Cancelar.\n"
-"Se só faltan algúns dos CDs, desmárqueos, e prema Aceptar."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom etiquetado \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalando o paquete %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Configuración trala instalación"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Insira un disquete na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Insira un disquete baleiro na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Vostede terá agora a posibilidade baixar programas de criptografía.\n"
-"\n"
-"AVISO:\n"
-"\n"
-"Por mor de requirimentos xerais aplicables a estes programas, e impostos\n"
-"por varias xurisdiccións, o cliente e/ou o usuario final destes programas "
-"ten\n"
-"que se asegurar de que as leis da súa xurisdicción lle permiten baixar,\n"
-"almacenar e/ou usar estes programas.\n"
-"\n"
-"Ademais, o cliente e/ou o usuario final ten que ter especial coidado en non\n"
-"infrinxi-las leis da súa xurisdicción. Se o cliente e/ou o usuario final "
-"non\n"
-"respeta estas leis aplicables, incorrerá en sancións graves.\n"
-"\n"
-"De ningún xeito Mandrakesoft nin os seus fabricantes e/ou provedores serán\n"
-"responsables de danos especiais, indirectos ou incidentais, sexan o que "
-"foren\n"
-"(incluindo, pero non limitando a, perda de beneficios, interrupción dos\n"
-"negocios, perda de datos comerciais e outras perdas pecuniarias, e nas\n"
-"eventuais responsabilidades e indemnizacións a seren pagadas por decisión\n"
-"dun tribunal) procedentes do uso, posesión, ou simplemente o feito de "
-"baixar\n"
-"este software, ó cal o cliente e/ou o usuario final tivese eventualmente\n"
-"acceso despois de asinar este acordo.\n"
-"\n"
-"Para calquera pregunta acerca de este acordo, por favor póñase en contacto "
-"con\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Escoller un espello do que coller os paquetes"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Contactando co espello para obter a lista dos paquetes dispoñibles"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "¿Cal é a súa zona horaria?"
-
-#: ../../install_steps_interactive.pm_.c:813
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "¿O reloxo interno do seu ordenador usa a hora GMT?"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:821
-#, fuzzy
-msgid "NTP Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Sen impresora"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Resume"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Rato"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Zona horaria"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Impresora"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "Tarxeta RDSI"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Tarxeta de son"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "Tarxeta de TV"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-#, fuzzy
-msgid "NIS"
-msgstr "Usar NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-#, fuzzy
-msgid "Local files"
-msgstr "Impresora local"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Contrasinal de root"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Sen contrasinal"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Este contrasinal é demasiado simple (ten que ter polo menos %d caracteres)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Autenticación"
-
-#: ../../install_steps_interactive.pm_.c:949
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autenticación"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:951
-#, fuzzy
-msgid "LDAP Server"
-msgstr "Servidor"
-
-#: ../../install_steps_interactive.pm_.c:957
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Autenticación NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "Dominio NIS"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:994
-#, fuzzy
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Un disco de arrinque personalizado dálle a posibilidade de arrincar o seu\n"
-"equipo baixo Linux sen depender do cargador de arrinque normal. Isto pode "
-"ser\n"
-"útil se non desexa instalar LILO (ou grub) no seu sistema, ou se outro "
-"sistema\n"
-"operativo o borra ou se LILO non funciona coa configuración do seu equipo.\n"
-"Un disco de arrinque personalizado tamén pode ser usado coa imaxe de "
-"rescate\n"
-"de Mandrake, facendo así moito máis fácil a recuperación no caso de fallo\n"
-"grave do sistema. ¿Desexa crear un disco de arrinque para o seu sistema?"
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Primeira unidade de disquete"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Segunda unidade de disquete"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Omitir"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Un disco de arrinque personalizado dálle a posibilidade de arrincar o seu\n"
-"equipo baixo Linux sen depender do cargador de arrinque normal. Isto pode "
-"ser\n"
-"útil se non desexa instalar LILO (ou grub) no seu sistema, ou se outro "
-"sistema\n"
-"operativo o borra ou se LILO non funciona coa configuración do seu equipo.\n"
-"Un disco de arrinque personalizado tamén pode ser usado coa imaxe de "
-"rescate\n"
-"de Mandrake, facendo así moito máis fácil a recuperación no caso de fallo\n"
-"grave do sistema. ¿Desexa crear un disco de arrinque para o seu sistema?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Desculpe, pero non hai ningunha disqueteira dispoñible"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Escolla a disqueteira que quere usar para crear o disco de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Insira un disquete na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Creando o disco de arrinque"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Preparando o cargador de arrinque"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "¿Desexa usar aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Erro instalando aboot, \n"
-"¿probar a forzar a instalación mesmo se iso destrúe a primeira partición?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Cargador de arrinque"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "A instalación do xestor de arrinque fallou. Ocorreu o seguinte erro:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Baixo"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Medio"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Alto"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Escola o nivel de seguridade"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Insira un disquete baleiro na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Creando un disquete de auto-instalación"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Algunhas das etapas non foron completadas.\n"
-"\n"
-"¿Desexa realmente saír agora?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Noraboa, a instalación rematou.\n"
-"Quite o disco de arrinque da unidade e prema [enter] para reiniciar.\n"
-"\n"
-"Para información sobre parches dispoñibles para esta versión\n"
-"de Mandrake Linux, consulte o ficheiro de erratas dispoñibles en\n"
-"http://www.mandrakelinux.com.\n"
-"\n"
-"Para información sobre a configuración do seu sistema, despois\n"
-"da instalación, hai un capítulo na Guía do Usuario Oficial\n"
-"de Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Xerar disquete de auto-instalación"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"A auto-instalación pode ser moi automatizada se así\n"
-"se desexa, nese caso adquirirá o control do disco duro\n"
-"(isto vale para a instalación noutro equipo).\n"
-"\n"
-"Pode preferir realizar novamente a instalación.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automatizada"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Reproducir"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Gardar a selección de paquetes"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalación de Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> entre elementos  |  <Space> escoller  |  <F12> seguinte "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "falla o kdesu"
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "Escolla a acción"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Avanzado"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Agarde, por favor"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Expandir árbore"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Pechar árbore"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Mudar entre lista completa e ordenada por grupos"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Ambigüidade (%s), sexa máis preciso\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Elección incorrecta, tente de novo\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (por omisión %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "¿A súa escolla? (por omisión %s)"
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "¿A súa escolla? (por omisión %s, escriba 'none' para ningunha)"
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Checo (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Alemán"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Teclado dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Español"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Finlandés"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Francés"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Noruegués"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Polaco"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Ruso"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Sueco"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Británico"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "Estadounidense"
-
-#: ../../keyboard.pm_.c:159
-#, fuzzy
-msgid "Albanian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armenio (antigo)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armenio (máquina de escribir)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armenio (fonético)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaianí (latín)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Búlgaro"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasileiro (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Bielorruso"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Suízo (alemán)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Suízo (francés)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Checo (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Alemán (sen teclas acentuadas)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Dinamarqués"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (EUA)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noruegués)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estonio"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Xeorxiano (\"ruso\")"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Xeorxiano (\"latino\")"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Grego"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Húngaro"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Israelí"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Israelí (Fonético)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islandés"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Italiano"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Xaponés de 106 teclas"
-
-#: ../../keyboard.pm_.c:201
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Británico"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latinoamericano"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituano AZERTY (antigo)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituano AZERTY (novo)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituano \"ringleira de números\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituano \"fonético\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "Localización"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Macedonio"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Holandés"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Polaco (disposición qwerty)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Polaco (disposición qwertz)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugués"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Canadiano (Québec)"
-
-#: ../../keyboard.pm_.c:217
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Ruso (Yawerty)"
-
-#: ../../keyboard.pm_.c:218
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Ruso (Yawerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Ruso (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Esloveno"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovaco (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovaco (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaianí (cirílico)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Teclado Thai"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Teclado Thai"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turco (tradicional modelo \"F\")"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turco (moderno modelo \"Q\")"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ucraíno"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "Estadounidense (internacional)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"ringleira de números\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Iugoslavo (latín/cirílico)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Puntos de montaxe circulares %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Quitar primeiro os volumes lóxicos\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Rato Sun"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Estándar"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Rato de roda PS2 xenérico"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 botón"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Xenérico"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Roda"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "serie"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Rato de 2 botóns xenérico"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Rato de 3 botóns xenérico"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Rato Logitech (serie, antigo tipo C7)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 botóns"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 botóns"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "ningún"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Ningún rato"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Probe o seu rato"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Para activar o rato,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "¡MOVA A RODA!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Finalizar"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Seguinte ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "¿É isto correcto?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Conectar á Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"O xeito máis habitual de conectar con adsl é con pppoe.\n"
-"Algunhas conexións usan pptp, e algunhas usan dhcp.\n"
-"Se non o sabe con certeza, escolla 'usar pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "usar dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "usar pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "usar pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"¿Que cliente dhcp desexa usar?\n"
-"Por omisión é o dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Non se detectou ningún adaptador de rede ethernet no seu sistema.\n"
-"Non se pode configurar este tipo de conexión."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Escolla a interface de rede"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Escolla o adaptador de rede que desexa usar para conectar á Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "non se atopou ningunha tarxeta de rede"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Configurando a rede"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Introduza o nome da súa máquina se o coñece.\n"
-"Algúns servidores DHCP precisan o nome da máquina para funcionar.\n"
-"Este nome debe ser completamente cualificado,\n"
-"como ``miñamaquina.meulab.miñacomp.es''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Nome de máquina"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Axudante da configuración de rede"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Módem RDSI externo"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Tarxeta RDSI interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "¿Que tipo de conexión RDSI ten?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "¡Detectouse unha configuración de firewall!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "¡Detectouse unha configuración de firewall!"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "Configuración da RDSI"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Seleccione o seu provedor.\n"
-" Se non está na lista, escolla 'Unlisted'"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protocolo de arrinque"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Resto do mundo"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Resto do mundo \n"
-" sen canle-D (liñas dedicadas)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "¿Qué protocolo desexa usar?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "¿Qué tipo de tarxeta ten?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Non sei"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Se ten unha tarxeta ISA, os valores na seguinte pantalla deberían ser os "
-"correctos.\n"
-"\n"
-"Se ten unha tarxeta PCMCIA, ten que coñecer a irq e a e/s da tarxeta.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Abortar"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Continuar"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "¿Cal é a sua tarxeta RDSI?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Detectouse unha Tarxeta RDSI PCI, pero se descoñece o tipo. Seleccione unha "
-"tarxeta PCI na seguinte pantalla."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Non se atopou ningunha tarxeta RDSI PCI. Seleccione unha na próxima pantalla."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Escolla o porto serie onde está conectado o seu módem."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Opcións de chamada"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Nome da conexión"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Número de teléfono"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "ID do login"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Baseado nun script"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Baseado nun terminal"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Nome de dominio"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Primeiro Servidor DNS (opcional)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Segundo Servidor DNS (opcional)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Pode desconectar ou reconfigurar a súa conexión."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Pode reconfigurar a súa conexión."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Está neste intre conectado á internet."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Pode conectar á Internet ou reconfigurar a súa conexión."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Non está neste intre conectado á Internet."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Conectar á Internet"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Desconectar de Internet"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Configurar a conexión de rede (LAN ou Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Conexión e configuración de Internet"
-
-#: ../../network/netconnect.pm_.c:96
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Pode desconectar ou reconfigurar a súa conexión."
-
-#: ../../network/netconnect.pm_.c:105
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Pode desconectar ou reconfigurar a súa conexión."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Configuración da rede"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Como está a facer unha instalación de rede, esta xa está configurada.\n"
-"Prema Aceptar para manter a configuración, ou Cancelar para reconfigurar a "
-"conexión de rede e Internet.\n"
-
-#: ../../network/netconnect.pm_.c:155
-#, fuzzy
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Conexión á Internet\n"
-"\n"
-"Vaise configurar a súa conexión á internet/rede.\n"
-"Se non quere usar a detección automática, desmarque a caixa.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Escolla o perfil para configurar"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Usar detección automática"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Detectando os dispositivos..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Conexión normal por módem"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "detectado no porto %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "conexión por RDSI"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "detectouse %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Conexión LAN"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "detectouse na interface %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Conexión por cable"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Conexión por cable"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "Conexión LAN"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "tarxeta(s) ethernet detectada(s)"
-
-#: ../../network/netconnect.pm_.c:190
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Elixa a ferramenta que queira usar"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:215
-#, fuzzy
-msgid "Internet connection"
-msgstr "Compartición da conexión á Internet"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "¿Desexa que a conexión se inicie ó arrincar?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Configuración da rede"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "¿Desexa reiniciar a rede?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Noraboa. A configuración da rede e de internet está rematada.\n"
-"\n"
-"Agora vai ser aplicada ó seu sistema.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Tras facer iso, aconséllase reiniciar o sistema X para\n"
-"evitar os problemas de mudar o nome de máquina."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"AVISO: Este dispositivo foi configurado previamente para conectar á "
-"Internet.\n"
-"Simplemente acepte para manter o dispositivo configurado.\n"
-"Se modifica os campos de embaixo, subsituirá esta configuración."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Introduza o enderezo IP desta máquina, por favor.\n"
-"Cada valor ten que ser introducido coma un enderezo IP en\n"
-"notación decimal con puntos (por exemplo: 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Configurar o dispositivo de rede %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (controlador %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "Enderezo IP"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Máscara de rede"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "IP automático"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Os enderezos IP deben estar no formato 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Introduza o nome da súa máquina.\n"
-"Ese nome debe ser un nome completamente cualificado,\n"
-"como ``miñamaquina.meulab.miñacomp.es''.\n"
-"Pode tamén introducir o enderezo IP da pasarela se usa unha"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "Servidor DNS"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Pasarela"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Dispositivo de pasarela"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Configuración dos proxys"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "O proxy debería ser http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "O proxy debería ser ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Configuración de Internet"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "¿Quere probar agora a conexión á Internet?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Probando a conexión..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "O sistema está conectado á Internet."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Semella que o sistema non está conectado á internet.\n"
-"Probe reconfigurando a conexión."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Configuración da conexión"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Encha ou marque os campos de embaixo"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ da tarxeta"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Memoria da tarxeta (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "E/S da tarxeta"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "E/S_0 da tarxeta"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "E/S_1 da tarxeta"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "O seu número de teléfono persoal"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Nome do provedor (p.ex provider.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Número de teléfono do provedor"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "Dns 1 do provedor (opcional)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "Dns 2 do provedor (opcional)"
-
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "Escoller teclado"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Modo de marcación"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-#, fuzzy
-msgid "Connection speed"
-msgstr "Tipo de conexión: "
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Tipo de conexión: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Login da conta (nome de usuario)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Contrasinal da conta"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "As particións estendidas non están soportadas nesta plataforma"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Ten un burato na táboa de particións, pero non se pode usar.\n"
-"A única solución é desprazar as particións primarias para que\n"
-"o burato esté despois das particións estendidas"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Fallou a restauración a partir do ficheiro %s: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Erro escribindo ó ficheiro %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Está a acontecer algo grave coa súa unidade.\n"
-"A proba para verificar a integridade dos datos fallou.\n"
-"Isto significa que calquera escritura no disco producirá lixo aleatorio"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "debe telo"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "importante"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "moi bo"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bo"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "indiferente"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Impresora local"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Impresora remota"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Servidor lpd remoto"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Impresora de rede (socket)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Impresora SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Servidor de impresión"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "URI do dispositivo de impresión"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(módulo %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Selección da conexión da impresora"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "¿Como está conectada a impresora?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"Cun servidor CUPS remoto, non terá que configurar aquí\n"
-"ningunha impresora, xa que serán detectadas automaticamente.\n"
-"No caso de dúbida, seleccione \"Servidor CUPS remoto\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Ningún"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Escolla o usuario por defecto:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-#, fuzzy
-msgid "Close"
-msgstr "Rato"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Os enderezos IP deben estar no formato 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "O número de porto debe ser numérico"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "Impresora local"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "IP do servidor CUPS"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Porto"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Configuración do estilo de arrinque"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Detectando os dispositivos..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Probar portos"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Unha impresora, de modelo \"%s\", foi detectada en "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Dispositivo de impresión local"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"¿A que dispositivo está conectada a súa impresora?\n"
-"(advirta que /dev/lp0 é equivalente a LPT1:)\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Dispositivo da impresora"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Opcións da impresora remota lpd"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Para utilizar unha fila de impresión remota lpd, é necesario\n"
-"que indique o nome do servidor de impresión e o nome da fila\n"
-"nese servidor."
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nome do servidor"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:320
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Nome do servidor"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nome do servidor"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcións de impresora SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Para imprimir nunha impresora SMB, é necesario escribir o\n"
-"nome do servidor SMB (que non sempre é o mesmo que o nome de\n"
-"máquina TCP/IP) e posiblemente o enderezo IP do servidor de\n"
-"impresoras, ademais é necesario o nome do recurso compartido\n"
-"da impresora que quere usar, así como calquera nome de usuario,\n"
-"grupo de traballo ou contrasinal que for necesario."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "Servidor de SMB"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "IP do servidor SMB"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Nome de recurso compartido"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Grupo de traballo"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "Opcións de impresora NetWare"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Para imprimir nunha impresora NetWare, é necesario escribir o nome\n"
-"do servidor de impresión NetWare (que non sempre é o mesmo que\n"
-"o nome de máquina TCP/IP), ademais do nome da fila de impresión\n"
-"que desexa usar, así como calquera nome de usuario ou contrasinal\n"
-"que for necesario."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Servidor de impresión"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Nome da fila de impresión"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Opcións da impresora de socket"
-
-#: ../../printerdrake.pm_.c:528
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Para imprimir nunha impresora de socket, ten que fornecer\n"
-"o nome do servidor da impresora, e opcionalmente o número do porto."
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "Servidor de impresión"
-
-#: ../../printerdrake.pm_.c:537
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Servidor de impresión"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "URI do dispositivo de impresión"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Nome da impresora"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Descrición"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Localización"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:793
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Conexión da impresora"
-
-#: ../../printerdrake.pm_.c:794
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "¿Qué tipo de impresora ten?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Configuración de Internet"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Configuración de Internet"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "¿Desexa probar a impresión?"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "Probar portos"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-#, fuzzy
-msgid "No test pages"
-msgstr "Si, imprimir ambas páxinas de proba"
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "Impresora"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "Ferramentas estándar"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Imprimindo páxina(s) de proba..."
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "Imprimindo páxina(s) de proba..."
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Imprimindo páxina(s) de proba..."
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"A(s) páxina(s) de proba enviáronse ó servidor de impresión.\n"
-"Pode que lle leve un pouco ata que a impresora comece.\n"
-"Estado da impresión:\n"
-"%s\n"
-"\n"
-"¿Funciona correctamente?"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"A(s) páxina(s) de proba enviáronse ó servidor de impresión.\n"
-"Pode que lle leve un pouco ata que a impresora comece.\n"
-"¿Funciona correctamente?"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Sen impresora"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Desactivando a rede"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "Opcións da impresora"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Configuración de Internet"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "Sen impresora"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Configurar a impresora"
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Probando a conexión..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Configurar a rede"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "O monitor non está configurado"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Configurando a rede"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "¿Que sistema de impresión desexa usar?"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Alto"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoico"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "¿Que sistema de impresión desexa usar?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Selección da conexión da impresora"
-
-#: ../../printerdrake.pm_.c:1728
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "¿Que sistema de impresión desexa usar?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configurar impresora"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Opcións da impresora"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:1845
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "¿Desexa configurar unha impresora?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Por omisión)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Servidor CUPS remoto"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "Servidor CUPS remoto"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-#, fuzzy
-msgid "Add printer"
-msgstr "Sen impresora"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "¿Desexa probar a configuración?"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Configuración de Internet"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Compartición da conexión á Internet"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Conexión da impresora"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "Imprimindo páxina(s) de proba..."
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "¿Desexa reiniciar a rede?"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Configuración dos proxys"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Porto"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "O proxy debería ser http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "O número de porto debe ser numérico"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "O proxy debería ser ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Login automático"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Contrasinal"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Sen contrasinal"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Os contrasinais non coinciden"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Non se pode engadir unha partición ó RAID _formatado_ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Non se pode escribir o ficheiro %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid fallou"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid fallou (¿pode que non estean as raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Non hai particións dabondo para o nivel RAID %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, un xestor de comandos periódicos."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd úsase para monitorizar o estado da batería e rexistralo a través do\n"
-"syslog. Tamén pode usarse para apagar a máquina cando a batería está baixa."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Executa os comandos programados polo comando at á hora indicada cando\n"
-"se executou at, e lanza comandos de lotes cando a carga media é baixa\n"
-"dabondo."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"O cron é un programa estándar de UNIX que executa programas especificados\n"
-"polo usuario en datas periódicas programadas. O vixie cron engade algunhas\n"
-"características ó cron básico de UNIX, incluindo mellor seguridade e\n"
-"opcións de configuración máis potentes."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM engade soporte para o rato ás aplicacións de texto de Linux, como\n"
-"o Midnight Commander. Tamén permite operacións de cortar e pegar co rato\n"
-"na consola, así como inclúe soporte para menús."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache é un servidor de World Wide Web.  Úsase para servir ficheiros HTML\n"
-"e CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"O daemon superservidor de internet (usualmente chamado inetd) lanza varios\n"
-"outros servicios de internet cando se precisan. É o responsable de iniciar\n"
-"moitos servicios, incluíndo telnet, ftp, rsh, e rlogin. Desactivando inetd\n"
-"desactívanse tódolos servicios de internet dos que é responsable."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Este paquete carga o mapa de teclado seleccionado en /etc/sysconfig/"
-"keyboard.\n"
-"Este pode escollerse usando a utilidade kbdconfig. Debería deixar isto\n"
-"activado para a maioría dos sistemas."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd é o daemon de impresión requirido para que o lpr funcione\n"
-"correctamente. É basicamente un servidor que distribúe os traballos de\n"
-"impresión á(s) impresora(s)."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) é un servidor de nomes de dominio (DNS), que se emprega\n"
-"para converter os nomes de máquinas a enderezos IP."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monta e desmonta tódolos puntos de montaxe de sistemas de\n"
-"ficheiros de Rede (NFS), SMB (Lan Manager/Windows) e NCP (NetWare)."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/desactiva tódalas interfaces de rede configuradas para\n"
-"seren activadas no arrinque."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS é un protocolo popular para compartir ficheiros a través de redes TCP/"
-"IP.\n"
-"Este servicio fornece funcionalidade de servidor NFS, que se configura co\n"
-"ficheiro /etc/exports."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS é un protocolo popular para compartir ficheiros a través de\n"
-"redes TCP/IP. Este servicio fornece funcionalidade de bloqueo de ficheiros."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"O soporte PCMCIA é normalmente para cousas como ethernet e módems en\n"
-"portátiles.  Non será arrincado ata que non estea configurado de xeito\n"
-"que non haxa problemas ó telo instalado en máquinas que non o precisan."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"O portmapper xestiona as conexións RPC, que son usadas por protocolos\n"
-"como NFS e NIS. O servidor portmap ten que estar a se executar en máquinas\n"
-"que actúan de servidores de protocolos que usan o mecanismo RPC."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix é un axente de transporte de correo (MTA), que é o programa\n"
-"que move o correo dunha máquina a outra."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Garda e restaura o estado da entropía do sistema para unha xeración\n"
-"de números aleatorios de calidade."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"O daemon routed permite actualizacións automáticas da táboa de\n"
-"encamiñamento IP mediante o protocolo RIP. Mentres RIP se usa amplamente\n"
-"en redes pequenas, outros protocolos máis complexos de encamiñamento\n"
-"precísanse para redes máis complexas."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"O protocolo rstat permite ós usuarios dunha rede obter\n"
-"métricas de rendemento de calquera máquina desa rede."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"O protocolo rusers permite ós usuarios dunha rede identificar quen\n"
-"está conectado noutras máquinas activas."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"O protocolo rwho permite que os usuarios remotos obteñan unha lista de\n"
-"tódolos usuarios conectados a unha máquina que está a executar o daemon\n"
-"rwho (similar ó finger)."
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Lanzar o sistema X-Window ó iniciar"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"O syslog é o método que usan moitos daemons para rexistrar mensaxes\n"
-"nos diversos ficheiros de rexistro do sistema.  É unha boa idea executar\n"
-"sempre o syslog."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:88
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Executa e para o Servidor de Fontes X ó arrincar e apagar."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Escolla os servicios que deben ser lanzados no arrinque do sistema"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "Impresora"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "Mouse Systems"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Opcións da impresora remota lpd"
-
-# ../../share/compssUsers
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Bases de datos"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "dispositivo"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "a se executar"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "parado"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servicios e daemons"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Non hai información adicional\n"
-"sobre este servicio, desculpe."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ó arrincar"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instalando o paquete %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Non se pode ler a táboa de particións, está demasiado deteriorada :-(\n"
-"Probarase a ir poñendo en branco as particións erróneas"
-
-#: ../../standalone/drakautoinst_.c:44
-#, fuzzy
-msgid "Error!"
-msgstr "Erro"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Configuración trala instalación"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Configuración do estilo de arrinque"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "¡Noraboa!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Compartición da conexión á Internet"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "A compartición da conexión á Internet está activada"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configuración da compartición da conexión á Internet xa foi feita.\n"
-"Actualmente está activada.\n"
-"\n"
-"¿Que desexa facer?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "desactivar"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "reconfigurar"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Desactivando os servidores..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "A compartición da conexión á Internet está agora desactivada."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "A compartición da conexión á Internet está desactivada"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configuración da compartición da conexión á Internet xa foi feita.\n"
-"Actualmente está desactivada.\n"
-"\n"
-"¿Que desexa facer?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "activar"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Activando os servidores..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "A compartición da conexión á Internet está agora activada."
-
-#: ../../standalone/drakgw_.c:182
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Está a piques de configurar o seu ordenador para que comparta a conexión á "
-"Internet.\n"
-"\n"
-"Nota: necesita un adaptador de rede dedicado para configurar unha rede de "
-"área local (LAN)."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (usando o módulo %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "¡Non hai ningún adaptador de rede no seu sistema!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Non se detectou ningún adaptador de rede ethernet no seu sistema. Execute a "
-"ferramenta de configuración de hardware."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Interface de rede"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Só hai un adaptador de rede configurado no seu sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Vaise configurar a rede de área local usando ese adaptador."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Escolla o adaptador de rede que vai estar conectado á rede de área local."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Atención, o adaptador de rede xa está configurado. Vai ser reconfigurado."
-
-#: ../../standalone/drakgw_.c:254
-#, fuzzy, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"¡Atopouse un conflicto potencial de enderezos da LAN na configuración actual "
-"de %_!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "¡Detectouse unha configuración de firewall!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"¡Atención! Detectouse unha configuración de firewall existente. Pode que "
-"teña que facer algún arranxo manual trala instalación."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Configurando..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Configurando os scripts, instalando o software, iniciando os servidores..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemas instalando o paquete %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Xa está todo configurado.\n"
-"Agora pode compartir a conexión á Internet con outros ordenadores da rede de "
-"área local, usando a configuración automática de rede (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-#, fuzzy
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"A configuración da compartición da conexión á Internet xa foi feita.\n"
-"Actualmente está desactivada.\n"
-"\n"
-"¿Que desexa facer?"
-
-#: ../../standalone/drakgw_.c:618
-#, fuzzy
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"A configuración da compartición da conexión á Internet xa foi feita.\n"
-"Actualmente está activada.\n"
-"\n"
-"¿Que desexa facer?"
-
-#: ../../standalone/drakgw_.c:619
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "A compartición da conexión á Internet está activada"
-
-#: ../../standalone/drakgw_.c:624
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Conexión e configuración de Internet"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuración de rede (%d adaptadores)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Perfil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Borrar perfil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Perfil para borrar:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Novo perfil..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Nome de máquina: "
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Acceso á Internet"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Tipo:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Pasarela:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Interface:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Estado:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-#, fuzzy
-msgid "Connected"
-msgstr "Conectar..."
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Non conectado"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Conectar..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-#, fuzzy
-msgid "Disconnect..."
-msgstr "Conectar..."
-
-#: ../../standalone/draknet_.c:215
-#, fuzzy
-msgid "Starting your connection..."
-msgstr "Probando a conexión..."
-
-#: ../../standalone/draknet_.c:223
-#, fuzzy
-msgid "Closing your connection..."
-msgstr "Probando a conexión..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "The system is now disconnected."
-msgstr "O sistema está conectado á Internet."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Configurar o acceso á Internet..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "Configuración da LAN"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Controlador"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protocolo"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "State"
-msgstr "Estado:"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Configurar a rede de área local..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Por favor, agarde... Aplicando a configuración"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "Configuración da LAN"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Protocolo de arrinque"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Iniciado o arrincar"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "activate now"
-msgstr "Activar"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "desactivate now"
-msgstr "Activar"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Configuración da conexión á Internet"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Configuración da conexión á Internet"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Tipo de conexión: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parámetros"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Tarxeta Ethernet"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Benvida ós crackers"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Pobre"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoico"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Este nivel hai que usalo con coidado. Fai que o seu sistema sexa máis\n"
-"sinxelo de utilizar, pero é moi sensible: non debe usarse nunha máquina\n"
-"conectada a outras ou á Internet. Non hai contrasinais de acceso."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Os contrasinais están activados, pero o uso como ordenador de rede aínda\n"
-"non se recomenda."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Poucas melloras neste nivel de seguridade, a principal é que hai máis\n"
-"avisos e comprobacións de seguridade."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Esta é a seguridade recomendada para un ordenador usado para conectar\n"
-"á Internet como cliente. Agora hai más comprobacións de seguridade."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Con este nivel de seguridade, é posible usar este sistema coma servidor.\n"
-"A seguridade é agora alta dabondo para usar o sistema coma un servidor\n"
-"que acepta conexións de múltiples clientes."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Tómanse características do nivel 4, pero agora o sistema está completamente\n"
-"pechado. As características de seguridade están ó máximo nivel."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "Establecendo o nivel de seguridade"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Escolla as opcións para o servidor"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Establecendo o nivel de seguridade"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centro de control"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Elixa a ferramenta que queira usar"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uso: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "¿Quere que a tecla de Borrar devolva Suprimir na consola?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Mude o Cd-Rom"
-
-#: ../../standalone/livedrake_.c:24
-#, fuzzy
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Por favor, insira o Cd-Rom de instalación na unidade e prema Aceptar.\n"
-"Se non o ten, prema Cancelar para evitar a actualización "
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "non se atopou ningún serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "¿Emular o terceiro botón?"
-
-#: ../../standalone/tinyfirewall_.c:29
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "lendo a configuración"
-
-#: ../../standalone/tinyfirewall_.c:42
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "lendo a configuración"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Escoller a lingua"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Clase de instalación"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detectar discos duros"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configurar o rato"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Escoller teclado"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr ""
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Sistemas de ficheiros"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatar particións"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Seleccionar paquetes"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalar sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Engadir usuario"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configurar a rede"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configurar servicios"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Crear disquete de arrinque"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Cargador de arrinque"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configurar as X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Saír da instalación"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, fuzzy, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Adaptador %s: %s"
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Erro ó abrir %s para escritura: %s"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Ordenador de rede (cliente)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Estación de traballo Gnome"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Ferramentas para o seu Palm Pilot ou o seu Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Estación de traballo"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Encamiñador"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programas de oficina: procesadores de texto (kword, abiword), follas de "
-"cálculo (kspread, gnumeric), visualizadores de pdf, etc"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Ferramentas de audio: reproductores de mp3 ou midi, mesturadores, etc"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Libros e howtos sobre Linux e o software libre"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Estación de traballo KDE"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Vídeo"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Conxunto de ferramentas para correo, novas, web, transferencia de ficheiros "
-"e chat"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Bases de datos"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "¿Desexa probar a configuración?"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Son"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilidades"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentación"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Ferramentas de consola"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Estación Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Estación multimedia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Configuración da LAN"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Máis escritorios gráficos (Gnome, IceWM)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"O ambiente de escritorio KDE, o ambiente gráfico básico cunha colección de "
-"ferramentas que o acompañan"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Desenvolvemento"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Ferramentas para crear e gravar CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Estación de traballo de oficina"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programas gráficos como o Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-"Bibliotecas de desenvolvemento en C e C++, programas e ficheiros include"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Servidor de ordenadores de rede"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Correo/Groupware/Novas"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Estación de xogos"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Reproductores e editores de vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Gráficos"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programas de divertimentos: arcade, taboleiros, estratexia, etc"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Conxunto de ferramentas para ler e enviar correo e novas (pine, mutt, tin..) "
-"e para navegar na Web"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arquivado, emuladores, monitorizaxe"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanzas persoais"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Un ambiente gráfico cun conxunto de aplicacións amigables e ferramentas de "
-"escritorio"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Acceso á Internet"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programas de reproducción/edición de son e vídeo"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Outros escritorios gráficos"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editores, shells, ferramentas de ficheiro, terminais"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programas para xestionar as súas finanzas, como o gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Xogos"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Xestión de información persoal"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - Gravación de CD"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Estación de traballo científica"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "non se pode abrir /etc/sysconfig/autologin para lectura: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "¿Desexa reiniciar a rede?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "¿Concorda?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Está a piques de se reiniciar o dispositivo de rede:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Está a piques de se reiniciar o dispositivo de rede %s. ¿Concorda?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "A menos que vostede saiba que é outra especificamente, a escolla habitual "
-#~ "é\n"
-#~ "\"/dev/hda\" (a unidade mestra da canle primaria) ou \"/dev/sda"
-#~ "\" (primeiro\n"
-#~ "disco SCSI)."
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Estas son as filas de impresión.\n"
-#~ "Pode engadir unha nova ou cambiar as que xa existen."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Tipo de conexión: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Escolla o usuario por defecto:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Probe o seu rato"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Escolla a lingua que prefira para a instalación e para o sistema."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Ten que aceptar os termos da licencia de enriba para continuar coa "
-#~ "instalación.\n"
-#~ "\n"
-#~ "\n"
-#~ "Por favor, prema \"Aceptar\" se concorda con eses termos.\n"
-#~ "\n"
-#~ "\n"
-#~ "Por favor, prema \"Rexeitar\" se non concorda con eses termos. A "
-#~ "instalación rematará sen modificar a súa configuración actual."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Escolla a disposición do teclado que corresponda ó seu na lista"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Se desexa ter outras linguas (á parte da que escolleu ó principio da\n"
-#~ "instalación) dispoñibles trala instalación, escóllaas na lista de "
-#~ "enriba.\n"
-#~ "Se quere seleccionar todas, só ten que usar \"Todas\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Seleccione:\n"
-#~ "\n"
-#~ "  - Personalizada: Se xa está familiarizado con GNU/Linux, pode entón "
-#~ "escoller\n"
-#~ "    o uso principal da súa máquina. Mire embaixo para os detalles.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Experto: Isto supón que vostede manexa ben GNU/Linux e quere facer\n"
-#~ "    unha instalación altamente personalizada. Do mesmo xeito que coa\n"
-#~ "    clase de instalación \"Personalizada\", poderá escoller o uso do seu\n"
-#~ "    sistema. Pero, por favor, ¡NON ESCOLLA ISTO A MENOS QUE SAIBA O QUE\n"
-#~ "    ESTÁ A FACER!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Agora ten que definir o uso da súa máquina. As escollas son:\n"
-#~ "\n"
-#~ "* Estación de traballo: esta é a escolla ideal se pretende usar a súa "
-#~ "máquina principalmente para o uso cotián,\n"
-#~ "  na oficina ou na casa.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Desenvolvemento: se pretende usar a súa máquina principalmente para o "
-#~ "desenvolvemento de software, esta é unha boa escolla.\n"
-#~ "  Terá unha completa colección de software instalado para compilar, "
-#~ "depurar e formatar código fonte, ou\n"
-#~ "  para crear paquetes de software.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Servidor: se pretende usar esta máquina coma servidor, é a escolla "
-#~ "correcta. Sexa un servidor de ficheiros (NFS\n"
-#~ "  ou SMB), un servidor de impresión (estilo Unix ou Microsoft Windows), "
-#~ "un servidor de autenticación (NIS), un servidor\n"
-#~ "  de bases de datos, etc... Como tal, non espere que haxa cousas como "
-#~ "KDE, GNOME, etc. instaladas."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Agora pode selecciona-lo grupo de paquetes que desexa instalar\n"
-#~ "ou actualizar.\n"
-#~ "\n"
-#~ "DrakX comprobará se ten espacio dabondo para instalalos todos. Se non,\n"
-#~ "avisaralle diso. Se quere seguir aínda así, procederá coa instalación\n"
-#~ "de tódolos grupos seleccionados, pero deixará algún de menor interese.\n"
-#~ "Ó final da lista pode marca-la opción \"Selección individual de paquetes"
-#~ "\";\n"
-#~ "neste caso terá que percorrer máis de 1000 paquetes..."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Se ten tódolos CDs da lista superior, prema Aceptar. Se non ten\n"
-#~ "ningún deses CDs, prema Cancelar. Se só faltan algúns dos CDs,\n"
-#~ "desmárqueos, e prema Aceptar."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Acenda o seu módem e escolla o correcto."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Vostede pode agora introduci-las opcións de chamada. Se non está seguro "
-#~ "de\n"
-#~ "que escribir, a información correcta pode obtela do seu ISP."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Introduza:\n"
-#~ "\n"
-#~ "  - Dirección IP: se non a coñece, pregúntelle ó seu administrador de "
-#~ "rede\n"
-#~ "ou ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Máscara de Rede: \"255.255.255.0\" é normalmente unha boa elección. "
-#~ "Se\n"
-#~ "non está seguro, pregunte ó seu administrador de rede ou ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - IP automática: Se a súa rede usa o protocolo bootp ou dhcp, escolla\n"
-#~ "esta opción. Neste caso, non é necesario ningún valor en \"Dirección IP"
-#~ "\".\n"
-#~ "Se non está seguro, pregunte ó seu administrador de rede ou ISP.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Se a súa rede usa NIS, escolla \"Usar NIS\". Se non o sabe, pregúntelle "
-#~ "ó\n"
-#~ "seu administrador de rede."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Agora pode introducir as opcións de marcado. Se non está seguro do\n"
-#~ "que escribir, a información correcta pode obtela do seu ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Se vai usar proxys, configúreos agora. Se non sabe se vai usar proxys,\n"
-#~ "pregunte ó seu administrador de rede ou ó seu ISP."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Pode instalar paquetes de criptografía se xa configurou a súa conexión a\n"
-#~ "internet correctamente. Primeiro escolla un espello do que quere baixa-"
-#~ "los\n"
-#~ "paquetes, e entón escolla os paquetes que desexa instalar.\n"
-#~ "\n"
-#~ "Percátese de que ten que escolle-lo espello e os paquetes criptográficos\n"
-#~ "de acordo coa súa lexislación."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr ""
-#~ "Agora pode seleccionar a zona horaria dependendo do lugar onde viva."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Agora pode introduci-lo contrasinal do superusuario para o seu sistema\n"
-#~ "Mandrake Linux. O contrasinal deberá ser tecleado dúas veces para\n"
-#~ "comprobar que ámbolos dous son idénticos.\n"
-#~ "\n"
-#~ "\n"
-#~ "O superusuario (root) é o administrador do sistema, e é o único usuario\n"
-#~ "ó que se lle permete modifica-la configuración do sistema. ¡Por tanto,\n"
-#~ "escolla o contrasinal con coidado! O uso non autorizado da conta de root\n"
-#~ "pode ser extremadamente perigoso para a integridade do sistema e os seus\n"
-#~ "datos, e para os outros sistemas conectados a el. O contrasinal debería\n"
-#~ "ser unha mestura de caracteres alfanuméricos e de 8 caracteres de longo,\n"
-#~ "polo menos. NUNCA debe ser anotado. Non escolla un contrasinal longo\n"
-#~ "de máis ou complicado: ten que ser capaz de lembralo sen moito esforzo."
-
-# Non é realmente fuzzy, é só para revisala. :)
-#, fuzzy
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Pode agora crear unha ou varias contas de usuarios «normais», como\n"
-#~ "contraposición á conta de usuario «privilexiado», root. Vostede\n"
-#~ "pode crear unha ou máis contas para cada persoa á que vostede queira\n"
-#~ "permitirlle o uso do ordenador. Note que cada conta de usuario terá\n"
-#~ "as súas preferencias (ambiente gráfico, configuración dos programas, "
-#~ "etc.)\n"
-#~ "e o seu propio directorio (chamado \"home\"), no que se almacenan esas\n"
-#~ "preferencias.\n"
-#~ "\n"
-#~ "\n"
-#~ "Antes que nada, ¡cree unha conta para vostede mesmo! Aínda se é a única\n"
-#~ "persoa que vai usa-la máquina, NON debe entrar como root para o uso\n"
-#~ "diario do sistema: é un risco de seguridade elevado. Facer que o\n"
-#~ "sistema fique totalmente inoperante, pode ser moitas veces causa dun\n"
-#~ "simple erro ó teclear.\n"
-#~ "\n"
-#~ "\n"
-#~ "Polo tanto, debe entrar no sistema usando a conta de usuario normal que\n"
-#~ "vai crear aquí, e entrar como root só para as tarefas de administración\n"
-#~ "que o precisen."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "As opcións principais do LILO e do grub son:\n"
-#~ "  - Dispositivo de arrinque: Establece o nome do dispositivo (p.ex unha\n"
-#~ "partición dun disco duro) que contén o sector de arrinque. A menos que\n"
-#~ "saiba específicamente que é outro, escolla \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Retardo antes de arrinca-la imaxe por omisión: Indica o número de\n"
-#~ "décimas de segundo que agardará o cargador de inicio antes de arrincar a\n"
-#~ "primeira imaxe. Isto é útil nos sistemas que arrincan inmediatamente do\n"
-#~ "disco duro tras activa-lo teclado. O boot loader non agarda se o \"retardo"
-#~ "\"\n"
-#~ "é cero ou non se indica.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Modo de vídeo: Indica o modo de texto VGA que será utilizado ó\n"
-#~ "arrincar. Os seguintes valores están dispoñibles:\n"
-#~ "    * normal: escoller modo de texto normal 80x25.\n"
-#~ "    * <número>: usa-lo modo de texto correspondente."
-
-#, fuzzy
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "LILO (O LInux LOader) e Grub son cargadores de arrinque: poden arrincar\n"
-#~ "Linux ou outro sistema operativo presente no seu ordenador.\n"
-#~ "Normalmente, estes outros sitemas son detectados correctamente e "
-#~ "instalados.\n"
-#~ "Se non é o caso, pode engadir unha entrada a man nesta pantalla. Sexa\n"
-#~ "coidadoso na escolla dos parámetros correctos.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tamén pode non querer dar acceso a eses outros sitemas operativos a "
-#~ "calquera,\n"
-#~ "poidendo borrar as entradas correspondentes. Pero neste caso, precisará\n"
-#~ "un disquete de arrinque para poder usalos."
-
-#, fuzzy
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "As opcións principais do LILO e do grub son:\n"
-#~ "  - Dispositivo de arrinque: Establece o nome do dispositivo (p.ex unha\n"
-#~ "partición dun disco duro) que contén o sector de arrinque. A menos que\n"
-#~ "saiba específicamente que é outro, escolla \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Retardo antes de arrinca-la imaxe por omisión: Indica o número de\n"
-#~ "décimas de segundo que agardará o cargador de inicio antes de arrincar a\n"
-#~ "primeira imaxe. Isto é útil nos sistemas que arrincan inmediatamente do\n"
-#~ "disco duro tras activa-lo teclado. O boot loader non agarda se o \"retardo"
-#~ "\"\n"
-#~ "é cero ou non se indica.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Modo de vídeo: Indica o modo de texto VGA que será utilizado ó\n"
-#~ "arrincar. Os seguintes valores están dispoñibles:\n"
-#~ "    * normal: escoller modo de texto normal 80x25.\n"
-#~ "    * <número>: usa-lo modo de texto correspondente."
-
-#, fuzzy
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Agora é o momento de configura-lo sistema de fiestras X, que é\n"
-#~ "o centro da interface gráfica de Linux. Para iso necesita configura-\n"
-#~ "-la súa tarxeta de vídeo e o seu monitor. A maioría deses pasos están\n"
-#~ "automatizados, así que probablemente a súa tarea limitarase a verificar\n"
-#~ "o que se fixo e aceptar a configuración proposta :-)\n"
-#~ "\n"
-#~ "\n"
-#~ "Cando a configuración estea rematada, lanzarase o servidor X\n"
-#~ "(a menos que vostede lle pida a DrakX que non), de xeito que\n"
-#~ "poida comprobar se todo está ben e corresponde ó que desexa.\n"
-#~ "Se non, pode voltar atrás e troca-la configuración; tantas\n"
-#~ "veces como sexa necesario."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Se algo vai mal coa configuración de X, use estas opcións para "
-#~ "configurar\n"
-#~ "correctamente o sistema X Window."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Se prefire usar un login gráfico, escolla \"Si\". Doutro xeito,\n"
-#~ "seleccione \"Non\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "O sistema vaise reiniciar.\n"
-#~ "\n"
-#~ "Despois de reiniciar, o seu novo sistema Mandrake Linux cargarase\n"
-#~ "automaticamente. Se vostede quere iniciar outro sistema operativo que xa\n"
-#~ "exista, lea as instruccións adicionais."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Checo (Programadores)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Eslovaco (Programadores)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Nome do perfil para crear:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Escribir /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "Restaurar a partir dun ficheiro"
-
-#~ msgid "Save in file"
-#~ msgstr "Gardar nun ficheiro"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Restaurar a partir dun disquete"
-
-#~ msgid "Format all"
-#~ msgstr "Formatar todas"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Logo de formatar tódalas particións,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "perderanse os datos nesas particións"
-
-#~ msgid "Reload"
-#~ msgstr "Recargar"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "¿Quere realmente xerar un disquete de instalación para replicar linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Configuración de ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Cun servidor CUPS remoto, non terá que configurar aquí\n"
-#~ "ningunha impresora, xa que serán detectadas automaticamente,\n"
-#~ "a menos que teña un servidor nunha rede diferente. Neste\n"
-#~ "caso, terá que indicar o enderezo IP do servidor de CUPS\n"
-#~ "e opcionalmente o número de porto."
-
-#~ msgid "Remote queue"
-#~ msgstr "Fila de impresión remota"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Fila de impresión remota"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Nome de dominio"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Sen impresora"
-
-#, fuzzy
-#~ msgid "start it"
-#~ msgstr "restrinxir"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "Configuración da rede"
-
-#~ msgid "Profile "
-#~ msgstr "Perfil "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Tipo de conexión: "
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "Conectar á Internet"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Desconectar de Internet"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Desconectar de Internet"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Desconectar de Internet"
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "Nome da conexión"
-
-#, fuzzy
-#~ msgid "Color configuration"
-#~ msgstr "Configuración"
-
-#~ msgid "Connect"
-#~ msgstr "Conectar"
-
-#, fuzzy
-#~ msgid "Disconnect"
-#~ msgstr "conexión por RDSI"
-
-#~ msgid "/File/_New"
-#~ msgstr "/Ficheiro/_Novo"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>N"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/Ficheiro/_Abrir"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>A"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/Ficheiro/_Gardar"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>G"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/Ficheiro/Gardar _como"
-
-#~ msgid "/File/-"
-#~ msgstr "Ficheiro/-"
-
-#~ msgid "/_Options"
-#~ msgstr "/_Opcións"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/Opcións/Proba"
-
-#~ msgid "/_Help"
-#~ msgstr "/A_xuda"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/Axuda/_Acerca..."
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Por omisión"
-
-#~ msgid "Europe"
-#~ msgstr "Europa"
-
-#~ msgid "NetWare"
-#~ msgstr "Impresora Netware"
-
-#~ msgid "Remove queue"
-#~ msgstr "Eliminar fila"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Non foi posible interpretar o contido do ficheiro de configuración."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Ficheiro de configuración non recoñecido"
-
-#~ msgid "Adapter"
-#~ msgstr "Adaptador"
-
-#~ msgid "Disable network"
-#~ msgstr "Desactivar a rede"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Desactivar a rede"
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Conexión DSL (ou ADSL)"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Rato"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Pode especificar directamente o URI para acceder á impresora co CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Si, imprimir unha páxina ASCII de proba"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Si, imprimir unha páxina PostScript de proba"
-
-#~ msgid "Paper Size"
-#~ msgstr "Tamaño do papel"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "¿Extraer a páxina trala impresión?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Opcións do controlador Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Opcións da profundidade de cor"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "¿Imprimir texto como PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "¿Corrixir o efecto escaleira?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Número de páxinas por páxina de saída"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Marxes dereita/esquerda en puntos (1/72 dunha polgada)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Marxes superior/inferior en puntos (1/72 dunha polgada)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Opcións extra do Ghostscript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Opcións extra para texto"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Inverter a orde das páxinas"
-
-#~ msgid "CUPS starting"
-#~ msgstr "CUPS iniciando"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Seleccionar a conexión á impresora remota"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Cada impresora necesita un nome (por exemplo lp).\n"
-#~ "Pódense definir outros parámetros como a descrición da\n"
-#~ "impresora ou a súa localización. ¿Que nome quere usar para\n"
-#~ "esta impresora e como está conectada?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Cada fila de impresión (á que se dirixen os traballos de impresión)\n"
-#~ "necesita un nome (frecuentemente lp) e un directorio spool asociado\n"
-#~ "a el. ¿Qué nome e directorio quere que se utilicen para esta fila e como\n"
-#~ "está conectada a impresora?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nome da fila"
-
-#~ msgid "Spool directory"
-#~ msgstr "Directorio spool"
-
-#~ msgid "Disable"
-#~ msgstr "Desactivar"
-
-#~ msgid "Enable"
-#~ msgstr "Activar"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Para ter un sistema máis seguro, debería seleccionar \"Usar ficheiro "
-#~ "shadow\"\n"
-#~ "e \"Usar contrasinais MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Se a súa rede usa NIS, escolla \"Usar NIS\". Se non o sabe, pregúntelle "
-#~ "ó\n"
-#~ "seu administrador de rede."
-
-#~ msgid "yellow pages"
-#~ msgstr "páxinas amarelas (yp)"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Configuración da LAN"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Dns 1 do provedor"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Dns 2 do provedor"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "¿Como quere conectar á Internet?"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Configuración do estilo de arrinque"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Vostede pode agora escoller algunhas opcións diversas para o sistema.\n"
-#~ "\n"
-#~ "  - Usar optimizacións de disco duro: esta opción pode mellora-lo "
-#~ "rendemento\n"
-#~ "    do disco duro, pero é só para usuarios avanzados: algúns chipsets que "
-#~ "non\n"
-#~ "    funcionan ben poden estraga-los seus datos. O kernel ten unha lista "
-#~ "negra\n"
-#~ "    de unidades e chipsets, pero se quere evitar sorpresas "
-#~ "desagradables,\n"
-#~ "    deixe esta opción desactivada.\n"
-#~ "\n"
-#~ "  - Escoller un nivel de seguridade: pode escoller un nivel de "
-#~ "seguridade\n"
-#~ "    para o seu sistema. Vaia ó manual para información completa. "
-#~ "Basicamente:\n"
-#~ "    se non sabe cal, escolla \"Medio\"; se quere realmente ter unha "
-#~ "máquina\n"
-#~ "    segura, escolla \"Paranoico\", pero teña coidado: ¡NESTE NIVEL, ROOT "
-#~ "NON\n"
-#~ "    PODE FACER LOGIN NA CONSOLA! Se quere ser root, terá que facer login "
-#~ "como\n"
-#~ "    usuario e entón usar \"su\". Máis xeralmente, non agarde usa-la súa\n"
-#~ "    máquina para outra cousa que non sexa un servidor. Xa foi avisado.\n"
-#~ "\n"
-#~ "  - Tamaño exacto da memoria se se necesita: por desgracia, no mundo "
-#~ "actual\n"
-#~ "    de PCs, non hai un método estándar para preguntarlle á BIOS acerca "
-#~ "da\n"
-#~ "    cantidade de RAM no seu ordenador. Por iso, Linux pode non ser capaz "
-#~ "de\n"
-#~ "    detectar correctamente a cantidade de RAM. Se é o caso, indique a\n"
-#~ "    cantidade correcta. Nota: unha diferencia de 2 ou 4 MB é normal.\n"
-#~ "\n"
-#~ "  - Automonta-las unidades extraíbles: Se vostede prefere non montar\n"
-#~ "    manualmente as unidades extraíbles (CD-ROM, disquete, Zip), "
-#~ "escribindo\n"
-#~ "    \"mount\" e \"umount\", escolla esta opción.\n"
-#~ "\n"
-#~ "  - Activar Bloq Num ó iniciar: Se quere que Bloq Num estea activado\n"
-#~ "    tralo arrinque, escolla esta opción (Nota: Bloq Num pode ou non pode\n"
-#~ "    funcionar nas X)."
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Varios"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Dependencias automáticas"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Tamaño seleccionado %d%s"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Preguntas varias"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Non se pode usar o supermount no nivel de seguridade alto"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "atención: NESTE NIVEL DE SEGURIDADE, A AUTENTICACIÓN DO ROOT NA CONSOLA\n"
-#~ "NON ESTÁ PERMITIDA!  Se quere ser root, terá que conectar coma\n"
-#~ "usuario e logo usar o \"su\".  De xeito máis xeral, non agarde que a\n"
-#~ "máquina actúe doutro modo distinto a un servidor.\n"
-#~ "Xa foi avisado."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Teña coidado, ter o bloqueo numérico activado causa que moitas teclas\n"
-#~ "dean díxitos en vez de letras normais (p.ex: premer `p' dá un `6')"
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "Desculpe, a configuración do correo aínda non está implementada. Sexa "
-#~ "paciente."
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "Benvido ó axudante da configuración de rede.\n"
-#~ "¿Que compoñentes desexa configurar?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Acceso a Internet/Rede"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Agora que a conexión á Internet está configurada,\n"
-#~ "o seu ordenador pode ser configurado para compartila.\n"
-#~ "Nota: Necesita un adaptador de rede dedicado para configurar unha rede de "
-#~ "área local (LAN).\n"
-#~ "\n"
-#~ "¿Desexa configurar a compartición da conexión á Internet?\n"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr ""
-#~ "Este script de inicialización tenta cargar os módulos para o rato usb."
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Configuración do LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Creación dun disquete de arrinque"
-
-#~ msgid "Format floppy"
-#~ msgstr "Formatar disquete"
-
-#~ msgid "Choice"
-#~ msgstr "Escolla"
-
-#~ msgid "Actions"
-#~ msgstr "Accións"
-
-# ../../share/compssUsers
-#~ msgid "Scientific applications"
-#~ msgstr "Aplicacións científicas"
-
-# ../../share/compssUsers
-#~ msgid "File/Print/Samba"
-#~ msgstr "Ficheiro/Impresión/Samba"
-
-# ../../share/compssUsers
-#~ msgid "DNS/DHCP "
-#~ msgstr "DNS/DHCP "
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "¿Que cargador(es) de arrinque quere usar?"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Zona horaria"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Disquete de auto-instalación"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Usar diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "Personalizada"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "¿Está seguro de que é un experto? \n"
-#~ "Permitiráselle facer cousas máis potentes pero perigosas.\n"
-#~ "Vánselle preguntar cuestións como: ``¿Usar ficheiro shadow para os "
-#~ "contrasinais?'', ¿está preparado para responder a este tipo de cuestións?"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "¿Cal é o uso do seu sistema?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Escolla o tamaño que quere instalar"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Usar ficheiro shadow"
-
-#~ msgid "shadow"
-#~ msgstr "shadow"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Usar contrasinais MD5"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(pode provocar corrupción dos datos)"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "Usar optimizacións de disco duro"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Activar Bloq Num ó iniciar"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Confirmar Contrasinal"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Atopouse unha tarxeta RDSI:\n"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "¿Desexa que se tente atopar un módem?"
-
-#~ msgid "France"
-#~ msgstr "Francia"
-
-#~ msgid "Other countries"
-#~ msgstr "Outros países"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "¿En que país se atopa vostede?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Módem alcatel"
-
-#~ msgid "ECI modem"
-#~ msgstr "Módem ECI"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr "Se o seu módem adsl é Alcatel, escolla Alcatel. Doutro xeito, ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "non usar pppoe"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Desactivar a Conexión a Internet"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Configurar a conexión a Internet / Configurar a Rede local"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "A rede local xa foi configurada.\n"
-#~ "Desexa:"
-
-#~ msgid "mandatory"
-#~ msgstr "obrigatorio"
-
-#~ msgid "interesting"
-#~ msgstr "interesante"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (importante)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (moi bo)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (bo)"
-
-#~ msgid "using module"
-#~ msgstr "usando un módulo"
-
-#~ msgid "Search"
-#~ msgstr "Buscar"
-
-#~ msgid "Package"
-#~ msgstr "Paquete"
-
-#~ msgid "Text"
-#~ msgstr "Texto"
-
-#~ msgid "Tree"
-#~ msgstr "Árbore"
-
-#~ msgid "Sort by"
-#~ msgstr "Ordenar por"
-
-#~ msgid "Category"
-#~ msgstr "Categoría"
-
-#~ msgid "See"
-#~ msgstr "Mirar"
-
-#~ msgid "Installed packages"
-#~ msgstr "Paquetes instalados"
-
-#~ msgid "Available packages"
-#~ msgstr "Paquetes dispoñibles"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Amosar só as pólas"
-
-#~ msgid "Expand all"
-#~ msgstr "Expandir todos"
-
-#~ msgid "Collapse all"
-#~ msgstr "Pechar todos"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Engadir localización dos paquetes"
-
-#~ msgid "Update location"
-#~ msgstr "Actualizar lugar"
-
-#~ msgid "Configuration: Add Location"
-#~ msgstr "Configuración: Engadir Lugar"
-
-#~ msgid "Find Package"
-#~ msgstr "Buscar Paquete"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Buscar paquete que conteña un ficheiro"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Trocar entre Instalado e Dispoñible"
-
-#~ msgid "Files:\n"
-#~ msgstr "Ficheiros:\n"
-
-#~ msgid "Choose package to install"
-#~ msgstr "Elixa o paquete a instalar"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Comprobando dependencias"
-
-#~ msgid "Wait"
-#~ msgstr "Agarde"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Os seguintes paquetes van ser desinstalados"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "Desinstalando os RPMs"
-
-#~ msgid "Regexp"
-#~ msgstr "Expr.Reg"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Que paquetes buscar"
-
-#~ msgid "%s not found"
-#~ msgstr "%s non atopado"
-
-#~ msgid "No match"
-#~ msgstr "Sen coincidencias"
-
-#~ msgid "No more match"
-#~ msgstr "Non hai máis coincidencias"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake está en modo ``baixa memoria''.\n"
-#~ "Vaise reiniciar rpmdrake para permitir a busca de ficheiros"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "¿Que ficheiro está a buscar?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "¿Que está a buscar?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Dea un nome (ex: `extra', `commercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Directorio"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Non hai cdrom dispoñible (nada en /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL do directorio que contén os RPMs"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Para FTP e HTTP, ten que indicar o lugar de hdlist\n"
-#~ "Ten que ser relativo á URL anterior"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Por favor, envíe a seguinte información"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s xa está en uso"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Actualizando a base de RPMs"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Vaise borra-la entrada %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Buscando as pólas"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "A busca das pólas leva un tempo"
-
-# ../../share/compssUsers
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Manipulación de Gráficos"
-
-# ../../share/compssUsers
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-# ../../share/compssUsers
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, bibliotecas, ferramentas"
-
-#~ msgid "Development applications"
-#~ msgstr "Aplicacións de desenvolvemento"
-
-#~ msgid "Multimedia"
-#~ msgstr "Multimedia"
-
-# ../../share/compssUsers
-#~ msgid "Sciences"
-#~ msgstr "Ciencias"
-
-# ../../share/compssUsers
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Programas de Chat (IRC ou mensaxería instantánea) como o xchat, licq, "
-#~ "gaim e ferramentas de transferencia de ficheiros"
-
-# ../../share/compssUsers
-#~ msgid "Communication facilities"
-#~ msgstr "Facilidades de Comunicación"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Development other"
-#~ msgstr "Outros de desenvolvemento"
-
-# ../../share/compssUsers
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Clientes e servidores de Bases de Datos (mysql e postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Desenvolvemento en C/C++"
-
-#~ msgid "Czech"
-#~ msgstr "Checo"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "¿A qué porto serie está conectado o rato?"
diff --git a/perl-install/share/po/help_xml2pm.pl b/perl-install/share/po/help_xml2pm.pl
deleted file mode 100755
index 249a4efe5..000000000
--- a/perl-install/share/po/help_xml2pm.pl
+++ /dev/null
@@ -1,209 +0,0 @@
-#!/usr/bin/perl
-
-use XML::Parser;
-use MDK::Common;
-
-my $help;
-my $dir = "doc/manual/literal/drakx";
-my @langs = grep { /^..$/ && -e "$dir/$_/drakx-help.xml" } all($dir) or die "no XML help found in $dir\n";
-
-my %helps = map {
-    my $lang = $_;
-    my $p = new XML::Parser(Style => 'Tree');
-    my $tree = $p->parsefile("$dir/$lang/drakx-help.xml");
-
-    $lang => rewrite2(rewrite1(@$tree), $lang);
-} @langs;
-
-my $base = delete $helps{en} || die;
-save_help($base);
-
-foreach my $lang (keys %helps) {
-    local *F;
-    my ($charset) = cat_("$lang.po") =~ /charset=([^\\]+)/ or die "missing charset in $lang.po\n";
-    open F, "| iconv -f utf8 -t $charset//TRANSLIT > help-$lang.pot";
-    #open F, "|cat - > help-$lang.pot";
-    print F "\n";
-    foreach my $id (keys %{$helps{$lang}}) {
-	$base->{$id} or die "$lang:$id doesn't exist in english\n";
-	print F qq(# DO NOT BOTHER TO MODIFY HERE, SEE:\n# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/$lang/drakx-help.xml\n);
-	print F qq(msgid ""\n");
-	print F join(qq(\\n"\n"), split "\n", $base->{$id});
-	print F qq("\nmsgstr ""\n");
-	print F join(qq(\\n"\n"), split "\n", $helps{$lang}{$id});
-	print F qq("\n\n);
-    }
-}
-
-
-sub save_help {
-    my ($help) = @_;
-    local *F;
-    open F, "| LC_ALL=fr iconv -f utf8 -t ascii//TRANSLIT > ../../help.pm";
-    print F q{package help;
-use common;
-
-# IMPORTANT: Don't edit this File - It is automatically generated 
-#            from the manuals !!! 
-#            Write a mail to <doc@linux-mandrake.com> if you want 
-#            it changed.
-
-%steps = (
-empty => '',
-};
-    print F qq(
-$_ => 
-__("$help->{$_}"),
-) foreach sort keys %$help;
-    print F ");\n";
-}
-
-# i don't like the default tree format given by XML::Parser,
-# rewrite it in my own tree format
-sub rewrite1 {
-    my ($tag, $tree) = @_;
-    my ($attr, @nodes) = @$tree;
-    my @l;
-    while (@nodes) {
-	my ($tag, $tree) = splice(@nodes, 0, 2);
-	if ($tag eq '0') {
-	    foreach ($tree) {
-		s/\s+/ /gs;
-		s/"/\\"/g;
-	    }
-	    push @l, $tree
-	} elsif ($tag eq 'screen') {
-	    $tree->[1] eq '0' or die "screen tag contains non CDATA\n";
-	    push @l, $tree->[2];
-	} else {
-	    push @l, rewrite1($tag, $tree);
-	}
-    }
-    { attr => $attr, tag => lc $tag, children => \@l };
-}
-
-# return the list of nodes named $tag
-sub find {
-    my ($tag, $tree) = @_;
-    if (!ref($tree)) {
-	();
-    } elsif ($tree->{tag} eq $tag) {
-	$tree;
-    } else {
-	map { find($tag, $_) } @{$tree->{children}};
-    }
-}
-
-sub rewrite2 {
-    use utf8;
-    my ($tree, $lang) = @_;
-    our $i18ned_open_text_quote  = $ {{ 
-	fr => "« ",
-	de => "„",
-	es => "\\\"",
-	it => "''",
-	}}{$lang};
-    our $i18ned_close_text_quote = $ {{ 
-	fr => " »",
-	de => "“",
-	es => "\\\"",
-	it => "''",
-	}}{$lang};
-    our $i18ned_open_label_quote  = $ {{ fr => "« ", de => "„"}}{$lang};
-    our $i18ned_close_label_quote = $ {{ fr => " »", de => "“"}}{$lang};
-    our $i18ned_open_command_quote  = $ {{ fr => "« ", de => "„"}}{$lang};
-    our $i18ned_close_command_quote = $ {{ fr => " »", de => "“"}}{$lang};
-    our $i18ned_open_input_quote  = $ {{ fr => "« ", de => "»"}}{$lang};
-    our $i18ned_close_input_quote = $ {{ fr => " »", de => "«"}}{$lang};
-    our $i18ned_open_key_quote  = $ {{ de => "["}}{$lang};
-    our $i18ned_close_key_quote = $ {{ de => "]"}}{$lang};
-    # rewrite2_ fills in $help
-    $help = {};
-    rewrite2_($tree);
-    $help;
-}
-
-sub rewrite2_ {
-    my ($tree) = @_;
-    ref($tree) or return $tree;
-
-    my $text = do {
-	my @l = map { rewrite2_($_) } @{$tree->{children}};
-	my $text;
-	foreach (grep { !/^\s*$/ } @l) {
-	    s/^ // if $text =~ /\s$/;
-	    $text =~ s/ $// if /^\s/;
-	    $text =~ s/\n+$// if /^\n/;
-	    $text .= $_;
-	}
-	$text;
-    };
-
-    if (0) {
-    } elsif (member($tree->{tag}, 'para', 'itemizedlist', 'orderedlist')) {
-	$text =~ s/^\s(?!\s)//;
-	$text =~ s/^( ?\n)+//;
-	$text =~ s/\s+$//;
-	qq(\n$text\n);
-    } elsif (member($tree->{tag}, 'quote', 'citetitle', 'foreignphrase')) {
-	($i18ned_open_text_quote || "``") . $text . ($i18ned_close_text_quote || "''");
-    } elsif (member($tree->{tag}, 'guilabel', 'guibutton', 'guimenu', 'literal')) {
-	($i18ned_open_label_quote || "\\\"") . $text . ($i18ned_close_label_quote || "\\\"");
-    } elsif ($tree->{tag} eq 'command') {
-	($i18ned_open_command_quote || "\\\"") . $text . ($i18ned_close_command_quote || "\\\"");
-    } elsif ($tree->{tag} eq 'userinput') {
-	($i18ned_open_input_quote || ">>") . $text . ($i18ned_close_input_quote || "<<");
-    } elsif ($tree->{tag} eq 'keycap') {
-	($i18ned_open_key_quote || "[") . $text . ($i18ned_close_key_quote || "]");
-    } elsif (member($tree->{tag}, 'keysym')) {
-	qq($text);
-    } elsif (member($tree->{tag}, 'footnote')) {
-	'(*)'
-    } elsif ($tree->{tag} eq 'warning') {
-	$text =~ s/^(\s+)/$1!! /;
-	$text =~ s/(\s+)$/ !!$1/;
-	$text;
-    } elsif ($tree->{tag} eq 'listitem') {
-	my $cnt;
-	$text =~ s/^\s+//;
-	$text =~ s/^/' ' . ($cnt++ ? '  ' : '* ')/emg;
-	"\n$text\n";
-
-    } elsif (member($tree->{tag},  
-		    'acronym', 'application', 'emphasis',  
-		    'keycombo', 'note', 
-		    'superscript', 'systemitem', 
-		    'tip', 'ulink', 'xref' 
-		   )) {
-	# ignored tags
-	$text;
-    } elsif (member($tree->{tag},
-		    'title', 'article', 'primary', 'secondary', 
-		    'indexterm', 
-		   )) {
-	# dropped tags
-	'';
-    } elsif ($tree->{tag} eq 'sect1') {
-	$text =~ s/^\s+//;
-
-	my @footnotes = map { 
-	    my $s = rewrite2_({ %$_, tag => 'para' });
-	    $s =~ s/^\s+//;
-	    "(*) $s";
-	} find('footnote', $tree);
-	$help->{$tree->{attr}{id}} = aerate($text . join('', @footnotes));
-	'';
-    } elsif ($tree->{tag} eq 'screen') {
-	qq(\n$text\n);
-    } else {
-	die "unknown tag $tree->{tag}\n";
-    }
-}
-
-sub aerate {
-    my ($s) = @_;
-    #- the warp_text column is adjusted so that xgettext do not wrap text around
-    #- which cause msgmerge to add a lot of fuzzy
-    my $s2 = join("\n\n", map { join("\n", warp_text($_, 75)) } split "\n", $s);
-    $s2;
-}
diff --git a/perl-install/share/po/hr.po b/perl-install/share/po/hr.po
deleted file mode 100644
index 6f3204898..000000000
--- a/perl-install/share/po/hr.po
+++ /dev/null
@@ -1,10944 +0,0 @@
-# KTranslator Generated File
-# Copyright (c) 1999 MandrakeSoft
-# Vladimir Vuksan <vuksan@veus.hr>, 1999.
-# Vlatko Kosturjak <kost@iname.com>, 2001.
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-09-15  12:52:56+0200\n"
-"Last-Translator: Vlatko Kosturjak <kost@iname.com>\n"
-"Language-Team: Croatian <lokalizacija@linux.hr>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KTranslator v 0.6.0\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Podesi sve zaslone nezavisno"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Koristi Xinerama pro¹irenje"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Podesi samo karticu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Vi¹e-zaslonska postava"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Va¹ sustav podr¾ava postavu sa vi¹e zaslona.\n"
-"©to ¾elite napraviti?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Grafièka kartica"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Odaberite grafièku karticu"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Odaberite X poslu¾itelj"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X poslu¾itelj"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Koju konfiguraciju XFree-a ¾elite imati?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹a video kartica mo¾e imati 3D ubrzanje samo sa XFree %s.\n"
-"Va¹a kartica je podr¾ana od XFree %s koji mo¾da ima bolju podr¹ku u 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Va¹a kartica mo¾e imati 3D hardware-sku akceleraciju sa XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s sa 3D hardware akceleracijom"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Va¹a kartica mo¾e imati 3D hadware akceleraciju podr¾anu od XFree %s,\n"
-"UPOZORAVAMO VAS DA JE OVO EKSPERIMENTALNA PODR©KA I MO®E ZAMRZNUTI VA©E "
-"RAÈUNALO."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s sa EXPERIMENTALNOM 3D hardware akceleracijom"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹a video kartica mo¾e imati 3D ubrzanje samo sa XFree %s,\n"
-"UPOZORAVAMO VAS DA JE OVO EKSPERIMENTALNA PODR©KA I MO®E ZAMRZNUTI VA©E "
-"RAÈUNALO.Va¹a kartica je podr¾ana od XFree %s koja mo¾e imati bolju podr¹ku "
-"u 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree postavke"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Odaberite kolièinu memorije na grafièkoj kartici"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Postavke poslu¾itelja"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Odaberite monitor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva kritièna parametra su vertikalna vrijednost osvje¾avanja, koja je "
-"vrijednost\n"
-"u kojoj se cijeli zaslon osvje¾ava, i najva¾nije horizontalna\n"
-"vrijednost osvje¾avanja koja ja vrijednost u kojoj se svaka linija "
-"prikazuje.\n"
-"\n"
-"JAKO JE VA®NO da ne specifirate tip monitora kod kojega je raspon "
-"osvje¾avanja\n"
-"veæi od moguænosti va¹eg monitora jer mo¾ete o¹tetiti va¹ monitor.\n"
-" Ukoliko ste u nedoumici, izaberite konzervativne postavke."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Horizontalna vrijednost osvje¾avanja"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Vertikalna vrijednost osvje¾avanja"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Niste podesili monitor"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Niste podesili grafièku karticu"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Niste podesili rezoluciju"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Da li ¾elite isku¹ati postavu ?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Upozorenje: testiranje grafièke kartice mo¾e zamrzunti va¹e raèunalo"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Isku¹aj postavu"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"provjerite parametre koje ste unjeli"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Pojavila se gre¹ka:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Zatvaram nakon %d sekundi"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Da li je ovo ispravno?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Pojavila se gre¹ka, provjerite parametre koje ste unjeli"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Rezolucija"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Odaberite rezoluciju  i color depth"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafièka kartica: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 poslu¾itelj: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Ekspertni mod"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Poka¾i sve"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Rezolucije"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Raspored tipkovnice: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Vrsta mi¹a: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Ureðaj mi¹a: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Horizontalna Sinkronizacija Monitora: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Vertikalno Osvje¾enje Monitora: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafièka kartica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafièka kartica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafièka memorija: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Dubina boje: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolucija: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 poslu¾itelj: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 upravljaèki program: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Pripremam X-Window postavu"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "©to ¾elite napraviti?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Promijeni monitor"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Promijeni grafièku karticu"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Promijeni postavke poslu¾itelja"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Promijeni rezoluciju"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Prika¾i informacije"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Isku¹aj ponovo"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Zavr¹i"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Zadr¾i promjene?\n"
-"Trenutna postava je:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Molim ponovo se logirajte u %s kako bi aktivirali promjenjeno"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Molim prvo se odjavite te pritisnite Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X kod pokretanja sustava"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Mogu podesiti da se X podigne automatski kod podizanja sustava.\n"
-"Da li ¾elite da se X automatski pokreæe?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 boja (8 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tisuæa boja (15 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tisuæa boja (16 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milijuna boja (24 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijarde boja (32 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB ili vi¹e"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standardni VGA, 640x480 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibilan, 1024x768 na 87 Hz s preplitanjem (bez 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 na 87 Hz s preplitanjem, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Pro¹ireni Super VGA, 800x600 na 60 Hz, 640x480 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Bez preplitanja SVGA, 1024x768 na 60 Hz, 800x600 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Visoko frekvencijski SVGA, 1024x768 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frekvencijski koji ide do 1280x1024 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frekvencijski koji ide do 1280x1024 na 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frekvencijski koji ide do 1280x1024 na 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor koji ide do 1600x1200 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor koji ide do 1600x1200 na 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Prvi sektor boot particije"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Prvi sektor pogona (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILO instalacija"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Gdje ¾elite instalirati bootloader?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalacija"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO sa tekstualnim menijem"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO sa grafièkim menijem"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Podizanje sa DOS/Windows-a (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Glavne postavke bootloadera"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Koristiti Bootloader"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Bootloader instalacija"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Boot ureðaj"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne radi na starim BIOSima)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Zbijeno"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "zbijeno"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Video mod"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Odgoda prije bootiranja uobièajenog imagea"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Lozinka"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Lozinka (provjera)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Ogranièene opcije na komandnoj liniji"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "ogranièi"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Oèisti /tmp na svakom podizanju"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precizna velièina RAMa (pronaðeno %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Omoguæi vi¹e obrazaca"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Upi¹ite velièinu RAM u Mb"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Postavka ``Ogranièene opcije na komandnoj liniji'' nema svrhe ako ne unesete "
-"lozinku"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Molim poku¹ajte ponovo"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Lozinke se ne podudaraju"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Init poruka"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Pauza Otvorenog Firmware-a"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Vrijeme èekanja podizanja kernela"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Omoguæi CD podizanje?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Omoguæi podizanje?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Uobièajeni OS?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Ovo su trenutni zapisi.\n"
-"Mo¾ete dodati jo¹ koji ili urediti postojeæi."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Dodaj"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Gotov"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Promjeni"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Kakvu vrstu zapisa ¾elite dodati"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Drugi OS (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Drugi OS (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Drugi OS (Windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Slika (image)"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Dodaj na kraj"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Èitaj-pi¹i"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tablica"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Nesigurno"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Oznaka"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Uobièajeno"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-velièina"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "NemaVidea"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Ukloni zapis"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Prazna oznaka nije dozvoljena"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Ova oznaka veæ postoji"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Prona¹ao sam %s %s meðusklopova"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Da li imate jo¹ koji?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Da li imate %s meðusklopova?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Da"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Poka¾i info o hardveru"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaliram upravljaèki program %s za karticu %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Koji %s upravljaèki program ¾elite isprobati?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"U nekim sluèajevima, %s upravljaèki program treba dodatne informacije da bi "
-"radio\n"
-"ispravno, iako normalno radi i bez toga. Da li ¾elite specifirati te "
-"dodatne\n"
-"opcije za njega ili ¾elite dozvoliti upravljaèkom programu da isproba va¹e\n"
-"raèunalo za informacije koje treba? Ponekad, isprobavanje mo¾e zamrznuti\n"
-"va¹e raèunlo, ali ne bi trebalo izazvati nikakvu ¹tetu."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Auto. ispitaj"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Odredi postavke"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Sada mo¾ete unijeti postavke za modul %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sada mo¾ete unijeti postavke za modul %s.\n"
-"Postavke su formata ``ime=vrijednost ime2=vrijednost2...''.\n"
-"Na primjer, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Postavke modula:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Uèitavanje modula %s nije uspjelo.\n"
-"Da li ¾elite poku¹ati ponovo sa drugim parametrima?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(veæ postoji %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Lozinka je prejednostavna"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Molim dajte korisniku korisnièko ime"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Korisnièko ime mo¾e sadr¾avati samo mala slova, brojeve, `-' i `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Ovaj korisnik veæ postoji"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Dodaj korisnika"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Unesite korisnika\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Prihvati korisnika"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Puno ime"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Korisnièko ime"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Ljuska"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Auto-prijava"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Raèunalo se mo¾e podesiti da se automatski prijavi kod podizanja sustava "
-"npr. neæe biti potrebno unositi nikakvu korisnièko ime ili lozinku.\n"
-"Pritisnite Odustani ako ne ¾elite aktivirati automatsku prijavu ?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Izaberite uobièajenog korisnika:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Izaberite prozorski upravitelj koji ¾elite pokrenuti:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Molim izaberite jezik koji ¾elite koristiti."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "Mo¾ete izabrati druge jezike koji æe biti dostupni nakon instalacije"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Sve"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Dobro dosli u %s izbornik operativnih sustava!\n"
-"\n"
-"Izaberite operativni sustav u popisu iznad ili\n"
-"prièekajte %d sekundi za uobièajeno podizanje.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Dobro dosli u GRUB izbornik operativnih sustava!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Za mijenjanje izabranog sustava pritisnite tipke %c i %c."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite ENTER za bootiranje izabranog OS, 'e' za promjenu"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "naredbe prije bootiranja ili 'c' za komandnu liniju."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Osvjetljeni zapis biti æe bootiran automatski za %d sekundi."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "nema dovoljno mjesta u /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Radna povr¹ina"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Gdje ¾elite instalirati bootloader?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "nema jo¹ implementirane pomoæi.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Postava Stila Podizanja"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Datoteka"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Novi stil kategoriziranja Monitora"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NoviStil Monitora"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradicionalni Monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradicionalni Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Pokreni Auroru pri podizanju"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub mod"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Trenutno koristite %s kao Upravitelj Boot-a.\n"
-"Pritisnite na Podesi za pokretanje èarobnjaka za postavljanje."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Podesi"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Boot mod"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Sistemski mod"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Pokreni X-Window sustav pri podizanju"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Ne, ne ¾elim automatsko prijavljivanje"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Da, ¾elim automatsko prijavljivanje sa ovim korisnikom i okru¾jem"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "U redu"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Odustani"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ne mogu otvoriti /etc/inittab za èitanje: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Instalacija LILO-a nije uspjela. Prijavljena je slijedeæa gre¹ska:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuta"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minuta"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundi"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Prvo napravite backup podataka"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Proèitajte pa¾ljivo!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ukoliko ¾elite koristiti aboot morate ostaviti dovoljno mjesta (npr. 2048 "
-"sektora) na\n"
-"poèetku diska"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Gre¹ka"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Èarobnjak"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Novi"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "Ukloni"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Toèka montiranja"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Opcije"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Vrsta"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Demontiraj"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Montiraj"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Izaberite akciju"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Va¹ sustav sadr¾i samo jednu veliku particiju.\n"
-"(Microsoft DOS/Windows obièno koristi jednu particiju).\n"
-"Preporuèam da promijenite velièinu particije\n"
-"(kliknite prvo na particiju te onda na \"Promijeni velièinu\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Molim kliknite na particiju"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Molim kliknite na particiju"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Molim kliknite na particiju"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Detalji"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "montiranje nije uspjelo"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Prazno"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Ostali"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Vrste datoteènih sustava:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Napravi"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Umjesto toga koristi ``%s''"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Obri¹i"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Prvo pritisnite ``Demontiraj''"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon mijenjanja tipa particije %s svi podaci na ovoj particiji biti æe "
-"obrisani"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Gdje ¾elite montirati ureðaj %s?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "Opcije montiranja"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "Razno"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "Uklonjivi medij"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "Promijeni tip"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Koji datoteèni sustav ¾elite?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Poslu¾itelj"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "Dijeljeni resurs"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Izaberite akciju"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Izaberite drugu particiju"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Izlaz"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Normalno > Ekspert"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Prebaci u normalni mod"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Vrati"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Da ipak nastavim?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Da zavr¹im bez spremanja"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Da zavr¹im bez zapisivanje particijske tablice?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Da li ¾elite spremiti /etc/fstab promjene?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Raspodijeli automatski"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Oèisti sve"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Vi¹e"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "Hard disk informacije"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Nema dovoljno prostora za auto-alokaciju"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Sve primarne particije su iskori¹tene"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Ne mogu dodati niti jednu dodatnu particiju"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Ako ¾elite dodati jo¹ koju particiju molim obri¹ite jednu od particija kako "
-"bi\n"
-"mogli stvoriti jednu extended particiju."
-
-#: ../../diskdrake_interactive.pm_.c:285
-msgid "Save partition table"
-msgstr "Spremi particijsku tabelu"
-
-#: ../../diskdrake_interactive.pm_.c:286
-msgid "Restore partition table"
-msgstr "Vrati particijsku tabelu"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Spasi particijsku tabelu"
-
-#: ../../diskdrake_interactive.pm_.c:289
-msgid "Reload partition table"
-msgstr "Ponovno uèitaj particijsku tabelu"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Automatsko montiranje uklonjivog (removable) medija"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Odaberite datoteku"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Backup particijske tablice nema istu velièinu\n"
-"Da ipak nastavim?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Upozorenje"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Umetnite disketu u pogon\n"
-"Svi podaci na disketi biti æe izbrisani"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Poku¹avam spasiti particijsku tablicu"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "Detaljne informacije"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Promijeni velièinu"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Premjesti"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formatiraj"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Aktivno"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Dodaj RAID-u"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Dodaj LVM-u"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Ukloni sa RAID-a"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Ukloni sa LVM-a"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Promijeni RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Koristi za loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Stvori novu particiju"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Poèetni sektor:"
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Velièina u MB:"
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Vrsta datoteènog sustava:"
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Mjesto montiranja:"
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Postavke:"
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatiram loopback datoteku %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Mijenjam tip particije"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Gdje ¾elite montirati loopback datoteku %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ne mogu maknuti toèku za montiranje zato ¹to se ova particija koristi za "
-"loop back.\n"
-"Uklonite loopback prvo"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Izraèunavam granice fat datoteènog sustava"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Mijenjam velièinu"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Ova particija nije promjenjiva u velièini"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Preporuèam da prvo backupirate sve podatke s ove particije"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon mijenjanja velièine particije %s svi podaci na ovoj particiji biti æe "
-"izgubljeni"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Odaberite novu velièinu"
-
-#: ../../diskdrake_interactive.pm_.c:591
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Velièina u MB:"
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Na koji disk se ¾elite premjestiti?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Na koji se sektor ¾elite premjestiti?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Premje¹tam"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Premje¹tam particiju..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Izaberite postojeæi RAID na koji ¾elite dodati "
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "novi"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Izaberite postojeæi LVM na koji ¾elite dodati "
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "LVM ime?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Ova particija se ne mo¾e koristiti za loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Ime loopback datoteke:"
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Puno ime"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Datoteku koristi neki drugi loopback. Molim izaberite neku drugu datoteku"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Datoteka veæ postoji. Da li da nju upotrijebim?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "ureðaj"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "razina"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "chunk velièina"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Budite oprezni: ova operacija je opasna"
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Kakav tip particioniranja?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"®alim meðutim ne mogu napraviti /boot toliko daleko na disku\n"
-"(cilindar > 1024).\n"
-"Imate dvije opcije ili æete koristiti LILO pa neæe raditi ili neæete\n"
-"koristiti LILO pa vam /boot neæe ni trebati."
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Particiju koju ste odabrali kao root (/) je fizièki locirana poslije 1024-"
-"tog cilindra va¹eg hard diska, a nemate /boot particiju.\n"
-"Ukoliko planirate koristiti LILO boot menad¾er, budite pa¾ljivi da dodate/"
-"boot particiju"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Izabrali ste softwaresku RAID particiju kao root (/).\n"
-"Nema bootloader-a koji je u moguænosti to podr¾ati bez /boot particije.\n"
-"Zato budite pa¾ljivi da dodate /boot particiju"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Particijska tablica pogona %s æe sada biti zapisana na disk!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Trebate ponovo pokrenuti sustav prije nego promjene postanu aktivne"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon formatiranja particije %s svi podaci na ovoj particiji biti æe obrisani"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Formatiram"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatiram loopback datoteku %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiram particiju %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid nije uspio"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Rezolucija: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Ureðaj:"
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS ureðaj slovo: %s (nagaðanje)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Vrsta: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Ime: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Poèetak: sektor %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Velièina: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektora"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Cilindar %d do cilindra %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Formatiran\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Nije formatiran\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Montiran\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback datoteka(e): %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Podrazumijevana boot particija\n"
-"  (za MS-DOS boot, ne za LILO)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Razina %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Chunk velièina %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskovi %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Ime loopback datoteke: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"©anse su, da je ova particija\n"
-"ustvari particija upravljaèkog programa, vjerojatno\n"
-"biste ju trebali ostaviti.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ova specijalna bootstrap\n"
-"particija je za\n"
-"dvostruko-podizanje (dual-boot) va¹eg sustava.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Velièina: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskovi %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Vrsta particijske tabele: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na sabirnici %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Opcije: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatiranje %s nije uspjelo"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ne znam kako formatirati %s kao vrstu %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "montiranje nije uspjelo"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck neuspje¹an sa izlaznim kodom %d ili signalom %d"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "montiranje nije uspjelo: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "gre¹ka kod demontiranja %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jednostavno"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "poslu¾itelj"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "JFS se ne mo¾e koristiti na particijama koje su manje od 16 MB"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "ReiserFS se ne mo¾e koristiti na particijama koje su manje od 32 MB"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Mjesto montiranja mora poèeti sa /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Veæ postoji particija sa mjestom montiranja %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ne mo¾ete koristiti LVM logièki prostor za mjesto montiranja %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Ovaj direktorij bi trebao ostati unutar root datoteènog sustava"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Treba vam istinski datoteèni sustav (ex2, reiserfs) za ovo mjesto "
-"montiranja\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Gre¹ka prilikom otvaranja %s za pisanje: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Pojavila se gre¹ka - ne mogu pronaæi niti jedan valjani ureðaj na kojem\n"
-"bih mogao instalirati datoteèni sustav. Provjerite da li je sa va¹im "
-"hardverom sve u redu."
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Nemate niti jednu particiju!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Gore su popisane postojeæe Linux particije pronaðene na\n"
-"va¹em hard disku. Mo¾ete zadr¾ati izbore napravljene od strane èarobnjaka, "
-"one su dobre za\n"
-"uobièajenu upotrebu. Ukoliko promjenite izbore, morate barem definirati "
-"root\n"
-"particiju (\"/\"). Nemojte izabrati premalu particiju jer neæete moæi \n"
-"instalirati dovoljno software-a. Ako ¾elite spremati va¹e podatke na "
-"posebnoj particiji,\n"
-"trebate takoðer izabrati \"/home\" (jedino moguæe ako imate vi¹e od jedne\n"
-"raspolo¾ive Linux particije).\n"
-"\n"
-"\n"
-"Za informaciju, svaka particija je popisana kako slijedi: \"Ime\", "
-"\"Kapacitet\".\n"
-"\n"
-"\n"
-"\"Ime\" je kodirano kako slijedi: \"tip hard diska\", \"broj hard diska\",\n"
-"\"broj particije\" (naprimjer, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tip hard diska\" je \"hd\" ukoliko je hard disk - IDE hard disk i \"sd\"\n"
-"ukoliko je on SCSI hard disk.\n"
-"\n"
-"\n"
-"\"Broj hard diska\" je uvijek slovo poslije \"hd\" ili \"sd\". Sa IDE hard "
-"diskovima:\n"
-"\n"
-"   * \"a\" znaèi \"master hard disk na primarnom IDE kontroleru\",\n"
-"\n"
-"   * \"b\" znaèi \"slave hard disk na primarnom IDE kontroleru\",\n"
-"\n"
-"   * \"c\" znaèi \"master hard disk na sekundarnom IDE kontroleru\",\n"
-"\n"
-"   * \"d\" znaèi \"slave hard disk na sekundarnom IDE kontroleru\".\n"
-"\n"
-"\n"
-"Sa SCSI hard diskovima, \"a\" znaèi \"primarni hard disk\", \"b\" znaèi "
-"\"sekundarni hard disk\", itd..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Sada mo¾ete izabrati servise koje ¾elite pokreniti pri podizanju.\n"
-"\n"
-"\n"
-"Kada va¹ mi¹ preðe preko jedinke, mala balonska pomoæ æe se pojaviti koja "
-"æe\n"
-"opisati ulogu tog servisa.\n"
-"\n"
-"\n"
-"Budite vrlo pa¾ljivi u ovom koraku ako planirate koristiti ovo raèunalo kao "
-"poslu¾itelj: vjerojatno\n"
-"neæete ¾eliti pokrenuti neke servise koje ne trebate. Molimo\n"
-"zapamtite da neki servisi mogu biti opasni ukoliko su omoguæeni na "
-"poslu¾itelju.\n"
-"Opæenito, izaberite samo one servise koje æe te zaista trebati."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"Linux koristi GMT (Srednje vrijeme po Greenwichu) koje onda preraèunava\n"
-"u lokalno vrijeme u va¹oj vremenskoj zoni koje ste odabrali."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-#, fuzzy
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"U ovom trenutku, trebate izabrati gdje æete instalirati va¹\n"
-"Mandrake Linux operativni sustav na va¹ hard disk. Ukoliko je prazan ili "
-"ako\n"
-"postojeæi operativni sustav koristi èitav prostor na disku, trebate ga\n"
-"particionirati. Jednostavno, particioniranje hard diska sastoji se od "
-"logièkog\n"
-"dijeljenja kako bi napravili prostor za instalaciju va¹eg novog Mandrake "
-"Linux sustava.\n"
-"\n"
-"\n"
-"Zato ¹to su posljedice procesa particioniranja obièno ireverzibilne,\n"
-"particioniranje mo¾e biti stra¹no i stresno ukoliko ste korisnik bez "
-"iskustva.\n"
-"Ovaj èarobnjak pojednostavljuje proces. Prije poèetka, molimo konzultirajte "
-"upute\n"
-"i uzmite vremena koliko vam je potrebno.\n"
-"\n"
-"\n"
-"Trebate najmanje dvije particije. Jedna je za sam operativni sustav, a\n"
-"druga je za virtualnu memoriju (takoðer zvanu Swap).\n"
-"\n"
-"\n"
-"Ukoliko su particije veæ definirane (iz prija¹nje instalacije iliiz\n"
-"drugih particijskih alata), trebate samo izbarati te particije za "
-"instalaciju va¹eg\n"
-"Linux sustava.\n"
-"\n"
-"\n"
-"Ukoliko particije nisu veæ definirane, trebate ih napraviti. \n"
-"Da biste to napravili, koristite èarobnjak gore raspolo¾iv. U zavisnosti od "
-"va¹ih hard disk\n"
-"postavki, nekoliko rje¹enja je raspolo¾ivo:\n"
-"\n"
-"* Kori¹tenje postojeæe particije: èarobnjak je detektirao jednu ili vi¹e "
-"postojeæih Linux particija na va¹em hard disku. Ukoliko\n"
-"  ih ¾elite zadr¾ati, izaberite ovu opciju.\n"
-"\n"
-"\n"
-"* Obri¹i cijeli disk: ukoliko ¾elite obrisati sve podatke i sve particije "
-"koje postoje na va¹em hard disku i zamjeniti ih sa\n"
-"  va¹im novim Mandrake Linux sustavom, mo¾ete izabrati ovu opciju. Budite "
-"pa¾ljivi sa ovim rje¹enjem, neæete moæi\n"
-"  povratiti va¹ izbor nakon potvrde.\n"
-"\n"
-"\n"
-"* Koristiti slobodan prostor na Windows particiji: ukoliko je Microsoft "
-"Windows instaliran na va¹em hard disku i zauzima\n"
-"  cjeli raspolo¾iv prostor na njemu, trebate napraviti slobodan prostor za "
-"Linux podatke. Da biste to napravili mo¾ete obrisati va¹u\n"
-"  Microsoft Windows particiju i podatke (pogledajte \"Brisanje cijelog diska"
-"\" ili \"Ekspert mod\" rje¹enja) ili mjenjati velièinu va¹e\n"
-"  Microsoft Windows particije. Mjenjanje velièine mo¾e se obaviti bez "
-"gubitka bilo kakvih podataka. Ovo rje¹enje je\n"
-"  preporuèeno ukoliko ¾elite koristiti zajedno Mandrake Linux i Microsoft "
-"Windows-e na istom raèunalu.\n"
-"\n"
-"\n"
-"  Prije izabiranja ovog rje¹enja, molimo razumite da æe velièina va¹e "
-"Microsoft\n"
-"  Windows partiticije biti manja nego ¹to je sada. To znaèi da æete imati "
-"manje slobodnog prostora pod\n"
-"  Microsoft Windows-ima za spremanje va¹ih podataka ili instaliranje novog "
-"software-a.\n"
-"\n"
-"\n"
-"* Ekspertni mod: Ukoliko ¾elite particionirati ruèno va¹ hard disk, mo¾ete "
-"izabrati ovu opciju. Budite pa¾ljivi prije\n"
-"  izabiranja ovog rje¹enja. Vrlo je moæno, ali i vrlo opasno. Mo¾ete "
-"izgubiti sve va¹e podatke vrlo lako. Zato,\n"
-"  nemojte izabrati ovo rje¹enje ukoliko ne znate ¹to radite."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Svaka particija koja je novo definirana mora biti\n"
-"formatirana za kori¹tenje (formatiranje znaèi pravljenje datoteènog "
-"sustava).\n"
-"\n"
-"\n"
-"Trenutno, mo¾ete htjeti ponovno formatirati neke veæ postojeæe particije "
-"kako bi obrisali\n"
-"podatke koje one posjeduju. Ukoliko ¾elite to napraviti, molimo takoðer "
-"izaberite particije\n"
-"koje ¾elite formatirati.\n"
-"\n"
-"\n"
-"Molimo primjetite da nije nu¾no ponovno formatirati sve veæ postojeæe "
-"particije.\n"
-"Morate ponovno formatirati particije koje sadr¾e operativni sustav (poput \"/"
-"\",\n"
-"\"/usr\" ili \"/var\") ali ne morate ponovno formatirati particije koje "
-"sadr¾e podatke\n"
-"koje ¾elite zadr¾ati (tipièno /home).\n"
-"\n"
-"\n"
-"Molimo budite pa¾ljivi odabirom particija, poslije formatiranja, svi podaci "
-"æe biti\n"
-"obrisani i neæete ih moæi povratiti.\n"
-"\n"
-"\n"
-"Pritisnite na \"U redu\" kada ste spremni za formatiranje particije.\n"
-"\n"
-"\n"
-"Pritisnite na \"Odustani\" kada ¾elite izabrati druge particije za "
-"instalaciju va¹eg novog\n"
-"Mandrake Linux operativnog sustava."
-
-#: ../../help.pm_.c:376
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Va¹ novi Mandrake Linux operativni sustav se trenutno instalira.\n"
-"Ova operacija bi trebala trajati nekoliko minuta (ovisi o velièini\n"
-"instalacije koju ste odabrali i brzini va¹eg raèunala).\n"
-"\n"
-"\n"
-"Molimo budite strpljivi."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-#, fuzzy
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"U ovoj toèki instalacije, trebate izabrati koje\n"
-"partiticije æete koristiti za instalaciju va¹eg novog Mandrake Linux "
-"sustava. Ukoliko su\n"
-"particije veæ definirane (iz prethodne instalacije GNU/Linux-a ili iz\n"
-"drugih particijskih alata), mo¾ete koristiti postojeæe particije. U drugim "
-"sluèajevima,\n"
-"hard disk particije moraju biti definirane.\n"
-"\n"
-"\n"
-"Za pravljenje particija, morate prvo izabrati hard disk. Mo¾ete izabrati \n"
-"disk za particioniranje klikanjem na \"hda\" za prvi IDE disk, \"hdb\" za\n"
-"drugi ili \"sda\" za prvi SCSI disk i tako dalje.\n"
-"\n"
-"\n"
-"Za particioniranje izabranog hard diska, mo¾ete izabrati ove opcije:\n"
-"\n"
-"   * Obri¹i sve: ova opcija æe obrisati sve raspolo¾ive particije na "
-"odabranom hard disku.\n"
-"\n"
-"\n"
-"   * Auto alokacija: ova opcija vam dozvoljava da automatski napravite Ext2 "
-"i swap particije u slobodnom prostoru va¹eg\n"
-"     hard diska.\n"
-"\n"
-"\n"
-"   * Spasi particijsku tablicu: ukoliko je va¹a particijska tablica "
-"o¹teæena, mo¾ete probati spasiti ju koristeæi ovu opciju. Molimo\n"
-"     budite pa¾ljivi i zapamtite da ne mora biti uspje¹na.\n"
-"\n"
-"\n"
-"   * Povrati: mo¾ete koristiti ovu opciju za odustajanje od va¹ih promjena.\n"
-"\n"
-"\n"
-"   * Ponovno uèitaj: mo¾ete koristiti ovu opciju ukoliko ¾elite vratiti "
-"unazad sve promjene i uèitati va¹u inicijalnu particijsku tablicu\n"
-"\n"
-"\n"
-"   * Èarobnjak: ukoliko ¾elite koristiti èarobnjak za particioniranje va¹eg "
-"hard diska, mo¾ete koristiti ovu opciju. Preporuèeno je ukoliko \n"
-"     nemate dovoljno znanja oko particioniranja.\n"
-"\n"
-"\n"
-"   * Vrati sa diskete: ukoliko ste spremili va¹u particijsku tablicu na "
-"disketu tijekom prija¹nje instalacije, mo¾ete\n"
-"     ju vratiti koristeæi ovu opciju.\n"
-"\n"
-"\n"
-"   * Spremi na disketu: ukoliko ¾elite spremiti va¹u particijsku tablicu na "
-"disketu kako biste ju mogli kasnije vratiti, mo¾ete koristiti ovu\n"
-"     opciju. Jako je preporuèljivo koristiti ovu opciju\n"
-"\n"
-"\n"
-"   * Zavr¹i: kada ste zavr¹ili s particioniranjem va¹eg hard diska, "
-"koristite ovu opciju za spremanje va¹ih promjena.\n"
-"\n"
-"\n"
-"Za informaciju, mo¾ete dohvatiti bilo koju opciju koristeæi tastaturu: "
-"navigiranje kroz particije se obavlja koristeæi Tab i Up/Down strelice.\n"
-"\n"
-"\n"
-"Kada je particija odabrana, mo¾ete koristiti:\n"
-"\n"
-"           * Ctrl-c za pravljenje novih particija (kada je prazna particija "
-"izabrana)\n"
-"\n"
-"           * Ctrl-d za brisanje particije\n"
-"\n"
-"           * Ctrl-m za postavljanje toèke montiranja\n"
-"           \n"
-"\n"
-"           \n"
-"Ukoliko instalirate na PPC raèunalo, ¾eliti æe te napraviti malu HFS "
-"'bootstrap' particiju od najmanje 1MB za kori¹tenje\n"
-"od strane yaboot bootloader-a. Ukoliko se odluèite za pravljenje malo veæe "
-"particije, recimo 50MB, mo¾ete ju pronaæi korisnom za stavljanje\n"
-"dodatnog kernela i ramdisk slike u sluèaju nu¾de."
-
-#: ../../help.pm_.c:460
-#, fuzzy
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Vi¹e od jedne Microsoft Windows particije su pronaðene\n"
-"na va¹em hard disku. Molimo izaberite jednu kojoj ¾elite promjeniti velièinu "
-"kako bi instalirali\n"
-"va¹ novi Mandrake Linux operativni sustav.\n"
-"\n"
-"\n"
-"Za informaciju, svaka particija je popisana kako slijedi; \"Linux ime\", "
-"\"Windows\n"
-"ime\" \"Kapacitet\".\n"
-"\n"
-"\"Linux ime\" je kodirano kako slijedi: \"tip hard diska\", \"broj hard diska"
-"\",\n"
-"\"broj particije\" (naprimjer, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tip hard diska\" je \"hd\" ukoliko je hard disk - IDE hard disk i \"sd\"\n"
-"ukoliko je on SCSI hard disk.\n"
-"\n"
-"\n"
-"\"Broj hard diska\" je uvijek slovo poslije \"hd\" ili \"sd\". Sa IDE hard "
-"diskovima:\n"
-"\n"
-"   * \"a\" znaèi \"master hard disk na primarnom IDE kontroleru\",\n"
-"\n"
-"   * \"b\" znaèi \"slave hard disk na primarnom IDE kontroleru\",\n"
-"\n"
-"   * \"c\" znaèi \"master hard disk na sekundarnom IDE kontroleru\",\n"
-"\n"
-"   * \"d\" znaèi \"slave hard disk na sekundarnom IDE kontroleru\".\n"
-"\n"
-"\n"
-"Sa SCSI hard diskovima, \"a\" znaèi \"primarni hard disk\", \"b\" znaèi "
-"\"sekundarni hard disk\", itd...\n"
-"\n"
-"\"Windows ime\" je slovo va¹eg hard diska pod Windows-ima (prvi disk\n"
-"ili particija se zove \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Molimo budite strpljivi. Ova operacija mo¾e potrajati nekoliko minuta."
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Molimo izaberite \"Instalacija\" ukoliko nemate prethodne verzijeMandrake "
-"Linux-a\n"
-"instalirano ili ako ¾elite koristiti nekoliko operativnih sustava.\n"
-"\n"
-"\n"
-"Molimo izaberite \"Dogradnja\" ukoliko ¾elite dograditi veæ postojeæu "
-"verzijuMandrake Linux-a.\n"
-"\n"
-"\n"
-"U zavisnosti od znanja u GNU/Linux, mo¾ete izabrati jednu od slijedeæih "
-"razina za instalaciju ili dogradnju\n"
-"va¹eg Mandrake Linux operativnog sustava:\n"
-"\n"
-"* Preporuèeno: ukoliko nikad niste instalirali GNU/Linux operativni sustav "
-"izaberite ovo. Instalacija æe biti\n"
-"  vrlo laka i pitati æe vas samo nekoliko pitanja.\n"
-"\n"
-"\n"
-"* Prilagoðeno: ukoliko ste veæ upoznati sa GNU/Linux, mo¾ete izabrati "
-"primarnu upotrebu (radna stanica, poslu¾itelj,\n"
-"  razvoj) za va¹ sustav. Trebati æete odgovoriti na vi¹e pitanja nego u "
-"\"Preporuèenoj\" instalacijskoj\n"
-"  klasi, zato trebate znati vi¹e o tome kako GNU/Linux radi kako bi izabrali "
-"ovu instalacijsku klasu.\n"
-"\n"
-"\n"
-"* Struènjak: ukoliko imate dobro znanje o GNU/Linux-u, mo¾ete izabrati ovu "
-"instalacijsku klasu. Kao u \"Prilagoðenoj\"\n"
-"  instalacijskoj klasi, moæi æete izabrati primarnu upotrebu za va¹ sustav "
-"(radna stanica, poslu¾itelj, razvoj). Budite jako\n"
-"  pa¾ljivi prije nego ¹to odaberete ovu instalacijsku klasu. Moæi æete "
-"izvr¹iti visoko prilagoðenu instalaciju.\n"
-"  Odgovori na neka pitanja mogu biti jako te¹ki ukoliko nemate dobro znanje "
-"GNU/Linux. Dakle, nemojte izabrati\n"
-"  ovu instalacijsku klasu ukoliko ne znate ¹to radite."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Molim odaberite ispravni port. Npr. COM1 port pod MS Windows-ima\n"
-"je imenovan ttyS0 pod GNU/Linux-om."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) i Grub su bootloaderi: oni su u moguænosti podiæi\n"
-"ili GNU/Linux ili bilo koji drugi postojeæi operativni sustav na va¹em "
-"raèunalu.\n"
-"Normalno, ti drugi operativni sustavi su ispravno pronaðeni i\n"
-"instalirani. Ako to nije sluèaj, mo¾ete ga dodati ruèno na ovom\n"
-"zaslonu. Budite pa¾ljivi da izaberete ispravne parametre.\n"
-"\n"
-"\n"
-"Takoðer æete po¾eliti ne dati pristup tim drugim operativnim sustavima\n"
-"drugima, u tom sluèaju mo¾ete obrisati odgovarajuæe unose. Ali\n"
-"u tom sluèaju, trebati æete boot disketu kako bi ih mogli podiæi!"
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Sada mo¾ete odabrati gdje ¾elite\n"
-"staviti informacije potrebne za bootiranje Linuxa.\n"
-"\n"
-"\n"
-"Ako ne znate ¹to odabrati odaberite \"Prvi sektor \n"
-"diska (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX æe poku¹ati pronaæi PCI SCSI adapter(e). Ukoliko DrakX\n"
-"pronaðe SCSI adapter i zna koji upravljaèki program da koristi, on æe "
-"automatski biti\n"
-"instaliran.\n"
-"\n"
-"\n"
-"Ukoliko nemate SCSI adapter, ISA SCSI adapter ili PCI SCSI adapter koji\n"
-"DrakX ne mo¾e prepoznati, biti æete pitani da li imate SCSI adapter u va¹em\n"
-"sustavu. Ukoliko nemate adapter, mo¾ete kliknuti na \"Ne\". Ukoliko kliknete "
-"na\n"
-"\"Da\", dobiti æete popis upravljaèkih programa odakle mo¾ete izabrati va¹\n"
-"specifièan adapter.\n"
-"\n"
-"\n"
-"Ako trebate ruèno specifirati va¹ adapter, DrakX æe pitati da li ¾elite \n"
-"specifirati opcije za njega. Trebali biste dozvoliti DrakX-u da isproba "
-"opcije za\n"
-"hardware. Ovo obièno radi dobro.\n"
-"\n"
-"\n"
-"Ako ne, trebati æete navesti opcije za upravljaèki program. Molimo "
-"pregledajte User\n"
-"Guide (poglavlje 3, sekciju \"Collective informations on your hardware\") za "
-"preporuke\n"
-"o pribavljanju ovih informacija iz dokumentacije hardware-a, sa \n"
-"proizvoðaèevog Web site-a (ukoliko imate Internet pristup) ili iz Microsoft "
-"Windows-a\n"
-"(ukoliko ga imate na va¹em sustavu)."
-
-#: ../../help.pm_.c:720
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Mo¾ete dodati dodatne unose za yaboot, ili za drugi operativni sustav,\n"
-"alternativne kernele, ili za spasonosnu boot sliku.\n"
-"\n"
-"\n"
-"Za druge OS-ove - unos se sastoji samo od labele i root particije.\n"
-"\n"
-"\n"
-"Za Linux, postoji nekoliko moguæih opcija: \n"
-"\n"
-"\n"
-"  - Labela: Ovo je jednostavno ime koje æete napisati u yaboot promptu za "
-"odabir ove \n"
-"boot opcije.\n"
-"\n"
-"\n"
-"  - Slika: Ovo æe biti ime kernela pri podizanju. Tipièno vmlinux ili\n"
-"varijacija vmlinux-a sa ekstenzijom.\n"
-"\n"
-"\n"
-"  - Root: root ureðaj ili '/' za va¹u Linux instalaciju.\n"
-"\n"
-"\n"
-"  \n"
-"  - Dodatak: Na Apple hardware-u, kernel dodatak opcija se koristi vrlo "
-"èesto za\n"
-"pomoæ pri inicijaliziranju video hardware-a, ili za omoguæavanje emulacije "
-"tastaturnih mi¹jih gumba\n"
-"zbog èestog nedostatka 2-og ili 3-eg mi¹jeg gumba na Apple mi¹evima. "
-"Slijedeæe \n"
-"su neki primjeri:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: Ova opcija se mo¾e koristiti ili za uèitavanje inicijalnih "
-"modula, prijenego ¹to je boot\n"
-"ureðaj raspolo¾iv, ili za uèitavanje ramdisk slike za spasonosne boot "
-"situacije.\n"
-"\n"
-"\n"
-"  - Initrd-velièina: Podrazumijevana velièina ramdisk-a je opæenito 4096 "
-"byte-ova. Ukoliko trebate\n"
-"alocirati veæi ramdisk, ova opcija mo¾e biti kori¹tena.\n"
-"\n"
-"\n"
-"  - Èitaj-Pi¹i: Normalno je 'root' particija inicijalno podignuta u èitaj-"
-"samo, za moguænost\n"
-"provjere datoteènog sustava prije nego sustav postane '¾iv'. Mo¾ete "
-"nadjaèati ovu opciju ovdje.\n"
-"\n"
-"\n"
-"  - NoVideo: Ako se Apple hardware poka¾e kao iznimno problematièan, mo¾ete\n"
-"izabrati ovu opciju za podizanje u 'novideo' modu, sa native framebuffer "
-"podr¹kom.\n"
-"\n"
-"\n"
-"  - Podrazumijevano: Izabire ovaj unos kao podrazumijevani Linux izbor, "
-"moguæe izbirati sa samo\n"
-"pritiskom ENTER-a na yaboot pitanju. Ovaj unos æe takoðer biti oznaèen sa "
-"'*', ukoliko\n"
-"koristite TAB za pregledavanje boot izbora."
-
-#: ../../help.pm_.c:765
-#, fuzzy
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot je bootloader za NewWorld MacIntosh hardware. U moguænosti je\n"
-"podiæi ili GNU/Linux, MacOS, ili MacOSX, ukoliko postoje na va¹em raèunalu.\n"
-"Normalno, ti drugi operativni sustavi su ispravno pronaðeni i\n"
-"instalirani. Ukoliko to nije sluèaj, mo¾ete dodati unos ruèno na ovom\n"
-"zaslonu. Budite pa¾ljivi da izaberete ispravne parametre.\n"
-"\n"
-"\n"
-"Yaboot glavne opcije su:\n"
-"\n"
-"\n"
-"  - Init Poruka: Jednostavna tekst poruka koja se prika¾e prije pitanja o\n"
-"podizanju.\n"
-"\n"
-"\n"
-"  - Boot Ureðaj: Oznaèava gdje ¾elite staviti informaciju potrebnu za \n"
-"podizanje GNU/Linux-a. Opæenito, morati æete imati postavljenu bootstrap "
-"particiju prije, \n"
-"da mo¾e dr¾ati ovu informaciju.\n"
-"\n"
-"\n"
-"  - Otvorena Firmware Pauza: Za razliku od LILO-a, postoje dvije raspolo¾ive "
-"pauze sa\n"
-"yaboot-om.  Prva pauza se mjeru sekundama i na tom mjestu mo¾ete \n"
-"birati izme¾u CD-a, OF boot-a, MacOS-a ili Linux-a.\n"
-"\n"
-"\n"
-"  - Kernel Boot Èekanje: Ovo èekanje je slièno LILO boot èekanju. Poslije \n"
-"izabiranja Linux-a, imati æete pauzu od 0.1 sekunde prije nego "
-"podrazumijevani\n"
-"kernel opis bude odabran.\n"
-"\n"
-"\n"
-"  - Omoguæi CD Boot?: Postavljanje ove opcije æe vam dozvoliti da mo¾ete "
-"izabrati 'C' za CD na\n"
-"prvom pitanju pri podizanju.\n"
-"\n"
-"\n"
-"  - Omoguæi OF Boot?: Postavljanje ove opcije æe vam dozvoliti da mo¾ete "
-"izabrati 'N' za Open\n"
-"Firmware prvi prvom pitanju pri podizanju.\n"
-"\n"
-"\n"
-"  - Podrazumijevani OS: Mo¾ete izabrati koji OS æete podiæi podrazumijevano "
-"kada Open Firmware \n"
-"pauza istekne."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Izaberite hard disk kojeg ¾elite obrisati kako bi instalirali va¹u\n"
-"novu Mandrake Linux particiju. Budite pa¾ljivi, svi postojeæi podaci biti æe "
-"izgubljeni\n"
-"i neæe se moæi povratiti."
-
-#: ../../help.pm_.c:832
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Izaberite \"U redu\" ukoliko ¾elite obrisati sve podatke i\n"
-"postojeæe particije na navedenom hard disku. Budite pa¾ljivi, nakon "
-"klikanja\n"
-"na \"U redu\", neæete moæi povratiti bilo kakve postojeæe podatke ili "
-"particije\n"
-"na ovom hard disku, ukljuèujuæi Windows podatke.\n"
-"\n"
-"\n"
-"Pritisnite na \"Odustani\" za prekidanje ove operacije bez gubljenja bilo\n"
-"kakvih postojeæih podataka i particija na ovom hard disku."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Izabrali ste slijedeæe poslu¾itelje: %s\n"
-"\n"
-"\n"
-"Ti poslu¾itelji biti æe postavljeno aktivirani. Oni nemaju poznatih "
-"sigurnosnih\n"
-"propusta, ali neki novi mogu biti pronaðeni. U tom sluèaju, morate ga "
-"nadograditi\n"
-"¹to prije moguæe.\n"
-"\n"
-"\n"
-"Da li zaista ¾elite instalirati te poslu¾itelje?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Ne mogu koristiti broadcast bez NIS domene"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Umetnite FAT formatiranu disketu u pogon %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Ova disketa nije FAT formatirana"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Za kori¹tenje spremljenog odabira paketa, podignite instalaciju sa ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Gre¹ka prilikom èitanja datoteke %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "U redu"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Neki hardware na va¹em raèunalu treba ``vlasnièke'' upravljaèke programe\n"
-"kako bi proradio. Mo¾ete naæi vi¹e informaciju o tome na: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Morate imati root particiju.\n"
-"Prvo napravite particiju (ili kliknite na postojeæu) te\n"
-"odaberite akciju ``Mjesto monitranja'' te odaberite `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Morate imati swap particiju"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Swap particija ne postoji\n"
-"\n"
-"Da ipak nastavim?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Morate imati FAT particiju montiranu na /boot/efi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Koristi slobodan prostor"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Koristi postojeæe particije"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Nema postojeæih particija koje bih mogao upotrijebiti"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Koristi Windows particiju za loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Koju particiju ¾elite koristiti za Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Odaberite velièinu"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Velièina korijenske particije u MB: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Velièina swap particiju u MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Iskoristi slobodan prostor na Windows particiji"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Kojoj particiji ¾elite promijeniti velièinu?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Izraèunavam granice Windows datoteènog sustava"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Program koji mjenja velièinu FAT-a ne mo¾e rukovati va¹om particijom, \n"
-"slijedeæa gre¹ka se dogodila: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Va¹a Windows particija je prefragmentirana, molim pokrenite ``defrag'' prvo."
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"UPOZORENJE!\n"
-"\n"
-"DrakX sada mora promijeniti velièinu va¹e Windows particije\n"
-"Budite vrlo oprezni buduæi da je ova operacija\n"
-"izuzetno opasna. Ukoliko jo¹ niste mijenjali velièinu particije molim\n"
-"pokrenite scandisk (a preporuèamo i defrag) i provjerite particiju koju\n"
-"¾elite mijenjati. Takoðer preporuèljivo je da backupirati sve podatke sa "
-"Windows particije.\n"
-"Kada ste sigurni da ¾elite nastaviti, pritisnite U redu."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Koliku velièinu ¾elite zadr¾ati za windowse"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "particija %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Mijenjanje FAT velièine nije uspjelo: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nema FAT particije za mjenjanje velièine ili za kori¹tenje loopback-a (ili "
-"nema dovoljno prostora)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Obri¹i cijeli disk"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Ukloni Windowse(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Imate vi¹e od jednog hard diska, na koji ¾elite instalirati Linux?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "SVE postojeæe particije i podaci biti æe izgubljeni na disku %s"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Proizvoljno particioniranje diska"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Koristi fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Sada mo¾ete razdijeliti %s.\n"
-"Kada ste gotovi ne zaboravite spremiti postavu sa `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nemate dovoljno slobodnog prostora na va¹oj Windows particiji"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Ne mogu pronaæi bilo kakvo mjesto za instaliranje"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX èarobnjak za particioniranje je prona¹ao slijedeæa rje¹enja:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Particioniranje neuspjelo: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Podi¾em mre¾u"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Onemoguæujem mre¾u"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Dogodila se gre¹ka, ali neznam kako s njom lijepo rukovati.\n"
-"Nastavite dalje na vlastiti rizik."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dupliciraj mjesto monitranja %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Neki va¾ni paketi nisu se instalirali pravilno.\n"
-"Ili je va¹ cdrom pogon ili cd medij u defektu.\n"
-"Provjerite cdrom na instaliranom raèunalu koristeæi \"rpm -qpl Mandrake/RPMS/"
-"*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Dobrodo¹li u %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Disketni pogon nije dostupan"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Pokreæem korak `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Izaberite velièinu koji ¾elite instalirati"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Ukupna velièina:"
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Inaèica: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Velièina: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Odaberite pakete koje ¾elite instalirati"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Info"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Instaliraj"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Instaliram"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Molim prièekajte, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Preostalo vrijeme"
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Ukupno vrijeme"
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Pripremam instalaciju"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaliram paket %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Da ipak nastavim?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Javila se gre¹ka prilikom sortiranja paketa:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Da koristim postojeæu postavu X11?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Va¹ sustav je slab na resursima. Mo¾ete imati nekih problem prilikom\n"
-"instalacije Mandrake Linux-a. Ukoliko se to desi, mo¾ete probati tekstualnu\n"
-"instalaciju. Za to, pritisnite `F1' kada podi¾ete CDROM, i unesite `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Instalacijski razred"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Molim izaberite jedan od slijedeæih razreda instalacije:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ukupna velièina izabranih grupa je otprilike %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ukoliko ¾elite instalirati manje od ove velièine,\n"
-"izaberite postotak paketa koliko ¾elite instalirati.\n"
-"\n"
-"Mali postotak æe instalirati samo najva¾nije pakete;\n"
-"dok postotak od 100%% æe instalirati sve odabrane pakete."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Imate mjesta na va¹em disku za samo %d%% paketa.\n"
-"\n"
-"Ukoliko ¾elite instalirati manje od ovoga,\n"
-"izaberite postotak paketa koliko ¾elite instalirati.\n"
-"Mali postotak æe instalirati samo najva¾nije pakete;\n"
-"dok postotak od %d%% æe instalirati koliko god je paketa moguæe."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Detaljniji izbor nalazi se u slijedeæem koraku."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Odaberite postotak paketa koje ¾elite instalirati"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Odabir grupe paketa"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Individualan odabir paketa"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ukupna velièina: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Lo¹ paket"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ime: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Znaèaj: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Ne mo¾ete oznaèiti ovaj paket buduæi da nema dovoljno mjesta gdje ga se mo¾e "
-"instalirati"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Slijedeæi paketi æe biti instalirani"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Slijedeæi paketi æe biti uklonjeni"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Ne mo¾ete oznaèiti/odznaèiti ovaj paket"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Buduæi da je ovo obvezni paket ne mo¾ete ga odznaèiti"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Ne mo¾ete odznaèiti ovaj paket buduæi da je veæ instaliran"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ovaj paket treba nadograditi\n"
-"Da li ste sigurni da ga ¾elite odznaèiti?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ne mo¾ete odznaèiti ovaj paket buduæi da ga treba nadograditi"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Prika¾i automatski odabrane pakete"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Uèitaj/Spremi na disketu"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "Dograðujem izbor paketa"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Minimal install"
-msgstr "Deinstaliraj"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Procjenjujem"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Molimo prièekajte, Pripremam instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d paketa"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Upozorenje\n"
-"\n"
-"Molimo proèitajte pa¾ljivo èinjenice ni¾e. Ukoliko se ne sla¾ete sa bilo\n"
-"kojim dijelom, nemate dozvolu instalirati slijedeæi CD medij. Pritisnite "
-"'Odbij' \n"
-"za nastavak instalacije bez kori¹tenja ovog medija.\n"
-"\n"
-"\n"
-"Neke komponente sadr¾ane u slijedeæem CD mediju nisu pokrivene\n"
-"GPL licencom ili sliènim ugovorom. Svaka takva komponenta je tada\n"
-"pokrivena stavkama i uvjetima svojim vlastitim specifiènim licencama. \n"
-"Molimo proèitajte pa¾ljivo i slo¾ite se specifiènim licencama prije \n"
-"va¹eg kori¹tenja ili redistribuiranja navedenih komponenti. \n"
-"Takve licence opæenito zabranjuju prijenos, dupliciranje \n"
-"(osim za spasonosne kopije), redistribuciju, reverzno in¾enjerstvo, \n"
-"disasembliranje, dekompilaciju ili promjenu komponente. \n"
-"Svako kr¹enje ugovora æe odmah prekinuti va¹a prava kod\n"
-"specifiène licence. Ako vam stavke specifiène licence ne odobre takva\n"
-"prava, obièno ne mo¾ete instalirati programe na vi¹e od jednog\n"
-"sustava, ili prilagoditi ga za kori¹tenje na mre¾i. Ako ste u nedoumici,\n"
-"kontaktirajte direktno distributera ili urednika komponente. \n"
-"Prijenos treæim osobama ili kopiranje takvih komponenti ukljuèujuæi \n"
-"dokumentaciju je obièno zabranjeno.\n"
-"\n"
-"\n"
-"Sva prava na komponente slijedeæeg CD medija pripadaju njihovim \n"
-"uva¾enim autorima i za¹tiæeni su intelektualnim vlasni¹tvom i \n"
-"autorskim zakonima primjenjivim na software-ske programe.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Prihvati"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Odbij"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Promjenite va¹ Cd-Rom!\n"
-"\n"
-"Ubacite Cd-Rom oznaèen \"%s\" u va¹ pogon i pritisnite U redu kada "
-"zavr¹ite.\n"
-"Ukoliko ga nemate, pritisnite Odustani kako bi izbjegli instalaciju sa ovog "
-"Cd-Rom-a."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Pojavila se gre¹ka kod instalacije paketa:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Pojavila se gre¹ka"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Licencni dogovor"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Uvod\n"
-"\n"
-"Operativni sustav i njegove razlièite komponente raspolo¾ive u Mandrake "
-"Linux distribuciji \n"
-"æe se zvati \"Software-ski Produkti\" daljnje u tekstu. Software-ski "
-"Produkti  ukljuèuju, ali nisu \n"
-"ogranièeni na, skup programa, metoda, zakona i dokumentacija vezanih uz "
-"operativni\n"
-"sustav i razlièite komponente Mandrake Linux distribucije.\n"
-"\n"
-"\n"
-"1. Licencni Dogovor\n"
-"\n"
-"Molimo pa¾ljivo proèitajte ovaj dokument. Ovaj dokument je licenci dogovor "
-"izmeðu vas i \n"
-"MandrakeSoft S.A. koji se primjenjuje na Software-ske produkte.\n"
-"Instaliranjem, dupliciranjem ili kori¹tenjem Software-skih Produkata u bilo "
-"kojem obliku,eksplicitno \n"
-"prihvaæate i potpuno se sla¾ete da æete prihvatiti stavke i uvjete ove "
-"Licence. \n"
-"Ukoliko se ne sla¾ete sa bilo kojim dijelom licence, nije vam dozvoljeno "
-"instalirati, duplicirati ili koristiti \n"
-"Software-ski produkt. \n"
-"Svaki poku¹aj instalacije, dupliciranja ili kori¹tenja Software-skog "
-"Produkta u obliku kojem ne prilièi \n"
-"sa stavkama i uvjetima ove licence je prazno i uni¹titi æe va¹a prava pod "
-"ovom\n"
-"Licencom. Uslijed uni¹tenja licence, morate odmah uni¹ititi sve kopije \n"
-"Software-skog Produkta.\n"
-"\n"
-"\n"
-"2. Ogranièeno Jamstvo\n"
-"\n"
-"Software-ski Produkt i pripadajuæa dokumentacija je pru¾ena \"kako je\", bez "
-"jamstva, do \n"
-"mjere dozvoljene zakonom.\n"
-"MandrakeSoft S.A. neæe, u bilo kojim sluèajevima i do te mjere dozvoljene "
-"zakonom, biti odgovaran za bilo kakvu specijalnu,\n"
-"nesretnu, direktnu ili indirektnu ¹tetu bilo kakvu (ukljuèujuæi granice "
-"¹tete od gubitka\n"
-"posla, prestanka posla, financijskih gubitaka, legalnih plaæanja i kazni "
-"posljedica sudskih \n"
-"presuda, ili bilo kakvih drugih posljedica gubitka) ¹to je posljedica "
-"kori¹tenja ili nemoguænosti kori¹tenja Software-skog \n"
-"Produkta, iako je MandrakeSoft S.A. bio upozoren od moguænosti takve \n"
-"¹tete.\n"
-"\n"
-"OGRANIÈENA ODGOVORNOST POVEZANA SA POSJEDOVANJEM ILI KORI©TENJEM ZABRANJENOG "
-"SOFTWARE-A U NEKIM ZEMLJAMA\n"
-"\n"
-"Do granice dozvoljene zakonom, MandrakeSoft S.A. ili njegovi distributori "
-"neæe, u bilo kakvim sluèajevima, biti \n"
-"odgovaran za bilo kakvu specijalnu, nesretnu, direktnu ili indirektnu ¹tetu "
-"bilo kako (ukljuèujuæi \n"
-"ogranièene ¹tete zbog gubitka posla, prekida posla, financijskog gubitka, "
-"legalnih plaæanja \n"
-"i kazni posljedica sudskih presuda, ili bilo kakvih drugih "
-"posljedicagubitka) ¹to je posljedica \n"
-"posjedovanja ili kori¹tenja software-skih komponenti ili kao posljedica "
-"skidanja (download-a) software-skih komponenti \n"
-"sa jednog od Mandrake Linux site-ova koja su zabranjena ili ogranièena u "
-"nekim zemljama po lokalnim zakonima.\n"
-"Ova ogranièena odgovornost se primjenjuje na, ali nije ogranièena, jake "
-"kriptografske komponente \n"
-"ukljuèene u Software-ski Produkt.\n"
-"\n"
-"\n"
-"3. GPL Licenca i sliène licence\n"
-"\n"
-"Software-ski Prodkt se sastoji od komponenti napravljenih od raznih ljudi "
-"ili entiteta.  Veliki \n"
-"broj tih komponenti je pokriveno pod stavkama i uvjetima GNU Opæe Javne \n"
-"Licence, u daljnjem tekstu zvana \"GPL\", ili  sliènih licenci. Veliki broj "
-"tih licenci dozvoljava vam kori¹tenje, \n"
-"dupliciranje, prilagoðavanje ili redistribuciju komponenti koju ona pokriva. "
-"Molimo proèitajte pa¾ljivo stavke \n"
-"i uvjete licencnog dogovora svake komponente prije kori¹tenja bilo koje "
-"komponente. Bilo koje pitanje \n"
-"o licenci komponente trebao bi biti adresiran autoru komponente a ne "
-"MandrakeSoft-u.\n"
-"Programe razvijeni od strane MandrakeSoft S.A. su pokriveni GPL licencom. "
-"Dokumentacija napisana \n"
-"od strane MandrakeSoft S.A. je pokrivena specifiènom licencom. Molimo "
-"pogledajte dokumentaciju za \n"
-"vi¹e detalja.\n"
-"\n"
-"\n"
-"4. Prava na intelektualno vlasni¹tvo\n"
-"\n"
-"Sva prava komponenti Software-skog Produkta pripada njihovim uva¾enim "
-"autorima i \n"
-"za¹tiæeni su intelektualnim vlasni¹tvom i autorskim zakonima primjenjivim na "
-"software-ske programe.\n"
-"MandrakeSoft S.A. zadr¾ava svoje pravo za izmjenu ili prilagoðavanje "
-"Software-skog Produkta, kao cijelinu ili u\n"
-"dijelovima, u svim sluèajevima za sve namjene.\n"
-"\"Mandrake\", \"Mandrake Linux\" i pripadajuæi logoi su za¹tiæeni prodajni "
-"znaci MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Dr¾avni zakoni \n"
-"\n"
-"Ukoliko neki dio ovog dogovora govori ni¹ta, ilegalan ili neprikladan "
-"sudstvu, taj \n"
-"dio mo¾e se iskljuèiti iz ovog ugovora. Ali ostajete obveznu drugim "
-"primjenjivim sekcijama\n"
-"ugovora.\n"
-"Za stavke i uvjete ove Licence je nadle¾an zakon Francuske.\n"
-"Sve sporove oko stavaka licence æe preferirano biti ureðeno sudom. Kao "
-"zadnji \n"
-"izlaz, spor æe biti predan odgovarajuæem Sudu u Parizu - Francuska.\n"
-"Za bilo kakva pitanja o ovom dokumentu, molimo kontaktirajte MandrakeSoft S."
-"A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tipkovnica"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Molim izaberite raspored tipkovnice."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Ovdje je cijeli popis raspolo¾ivih tipkovnica"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Koji instalacijski razred ¾elite?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Instaliraj/Nadogradi"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Da li je ovo instalacija ili nadogradnja?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Preporuèeno"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Dogradnja"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Molim izaberite koju vrstu mi¹a koristite."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Port mi¹a"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Izaberite na kojem serijskom portu je mi¹ prikljuèen."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Emulacija gumbova"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Emulacija 2 gumba"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Emulacija 3 gumba"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Pode¹avam PCMCIA kartice..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Pode¹avam IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "nema dostupnih particija"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Tra¾im particije kako bi prona¹ao mjesta montiranja"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Odaberite mjesta montiranja"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ne mogu proèitati particijsku tablicu, previ¹e je koruptirana za mene :(\n"
-"Mogu poku¹ati sa brisanjem lo¹ih particija (SVI PODACI æe biti "
-"izgubljeni!).\n"
-"Drugo rje¹enje je onemoguæiti DrakX-u da mjenja particijsku tablicu.\n"
-"(gre¹ka je %s)\n"
-"\n"
-"Da li se sla¾ete da izgubite sve particije?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake nije uspio proèitati va¹u particijsku tablice.\n"
-"Nastavite o vlastitoj odgovornosti."
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nema slobodnog mjesta za 1 MB bootstrap! Instalacija æe nastaviti, ali za "
-"podizanje va¹eg sustava, trebati æete napraviti bootstrap particiju u "
-"DiskDrake-u"
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "Niti jedna root particija nije pronaðena da se obavi dogradnja"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Korijenska particija"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Koja je korijenska particija  (/) va¹eg sustava?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Morate ponovo pokrenuti sustav kako bi se aktivirala promjena particijske "
-"tablice"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Izaberite particije koje ¾elite formatirati"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Provjeri za lo¹e blokove?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Formatiram particije"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Stvaram i formatiram datoteku %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nema dovoljno swapa za zavr¹etak instalacije, molim dodajte jo¹"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Tra¾im dostupne pakete"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Tra¾im pakete koje mogu nadograditi"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Va¹ sustav nema dovoljno prostora za instalaciju ili dogradnju (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Kompletno (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Preporuèeno (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Prilagoðeno"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Molimo izaberite uèitivanje ili spremanje izbora paketa na disketu.\n"
-"Format je isto kao auto_install napravljene diskete."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Uèitaj sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Uèitavam sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Odabir paketa"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "Umetnite disketu koja sadr¾ava izbor paketa"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Spremi na disketu"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Izabrana velièina je veæa nego raspolo¾iv prostor"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ako imate sve dolje navedene CDove kliknite U redu.\n"
-"Ako nemate niti jedan od navedenih CD kliknite Odustani.\n"
-"Ako imate samo neke od dolje navedenih CDa odznaèite one koje nemate i "
-"kliknite U redu."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom naslovljen \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instaliram paket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Postava nakon instalacije"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Umetnite disketu u pogon %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Umetnite praznu disketu u pogon %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Sada imate moguænost za skidanje software-a za enkripciju.\n"
-"\n"
-"UPOZORENJE:\n"
-"\n"
-"Zbog razlièitih opæih zahtjeva primjenjivih na ovaj software i presuda\n"
-"raznih sudova, kupac i/ili krajnji korisnik ovog software-a treba se\n"
-"uvjeriti da zakoni njegovog/e sudstva dozvoljava mu/joj da skine, spremi\n"
-"i/ili koristi ovaj software.\n"
-"\n"
-"U dodatku kupac i/ili krajnji korisnik mora dijelom biti svjestan da ne "
-"prekr¹i\n"
-"zakon svoga sudstva. Ukoliko kupac i/ili krajnji korisnik ne \n"
-"po¹tuje stavke tih primjenjivih zakona, mo¾e ga dovesti do ozbiljnih\n"
-"sankcija.\n"
-"\n"
-"U bilo kojem sluèaju Mandrakesoft ili njegovi proizvoðaèi i/ili nabavljaèine "
-"mogu biti odgovorni\n"
-"za specijalne, indirektne ili sluèajne ¹tete bilo kako (ukljuèujuæi, ali ne\n"
-"ogranièana na gubitak profita, prekid posla, gubitak komercijalnih podataka\n"
-"i\n"
-"drugih novèanih gubitaka, i eventualne odgovornosti i isplate naknade ¹to "
-"treba biti plaæeno\n"
-"odlukom suda) ¹to je posljedica kori¹tenja, posjedovanja ili samog\n"
-"skidanja ovog software-a, kojemu æe kupac i/ili krajnji korisnik mo¾e\n"
-"eventualno imati pristup poslije potpisivanja postojeæeg ugovora/dogovora.\n"
-"\n"
-"\n"
-"Za bilo kakve upite u svezi ovog ugovora, molimo kontaktirajte \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Izaberite mirror sa kojeg ¾elite skinuti pakete"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Spajam se na mirror kako bih pribavio popis dostupnih paketa"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Odaberite pakete za instalaciju."
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Koja je va¹a vremenska zona?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "Va¹ hardverski sat namje¹ten je na GMT"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatska vremenska sinkronizacija (koristeæi NTP)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "NTP Poslu¾itelj"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Udaljeni CUPS poslu¾itelj"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Nema pisaèa"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Sumarno"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Mi¹"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Vremenska zona"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Pisaè"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDN kartica"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Zvuèna kartica"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV kartica"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Lokalne datoteke"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Pode¹avanje root lozinke"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Bez lozinke"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Ova lozinka je prejednostavna (lozinka mora sadr¾avati barem %d znakova)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Provjera autentiènosti"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "LDAP Autentifikacija"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "LDAP Poslu¾itelj"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "NIS Autentifikacija"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS domena"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS Poslu¾itelj"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Proizvoljna boot disketa omoguæava naèin podizanja va¹eg Linux sustava bez\n"
-"ovisnosti o normalnom bootloader-u. Ovo je korisno ukoliko ne ¾elite "
-"instalirati\n"
-"SILO na va¹ sustav, ili je drugi operativni sustav uklonio SILO, ili SILO "
-"ne\n"
-"¾eli raditi sa va¹om konfiguracijom hardware-a. Proizvoljna boot disketa "
-"takoðer mo¾e biti kori¹tena sa\n"
-"Mandrake spasonosnom slikom, omoguæavajuæi tako lak¹e spa¹avanje od raznih "
-"sustavskih\n"
-"gre¹aka.\n"
-"\n"
-"Ako ¾elite napraviti boot disketu za va¹ sustav, ubacite disketu u prvi\n"
-" pogon i pritisnite \"U redu\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Prvi disketni pogon"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Drugi disketni pogon"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Preskoèi"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Proizvoljna boot disketa omoguæava naèin podizanja va¹eg Linux sustava bez\n"
-"ovisnosti o normalnom bootloader-u. Ovo je korisno ukoliko ne ¾elite "
-"instalirati\n"
-"LILO (ili grub) na va¹ sustav, ili je drugi operativni sustav uklonio LILO, "
-"ili LILO ne\n"
-"¾eli raditi sa va¹om konfiguracijom hardware-a. Proizvoljna boot disketa "
-"takoðer mo¾e biti kori¹tena sa\n"
-"Mandrake spasonosnom slikom, omoguæavajuæi tako lak¹e spa¹avanje od raznih\n"
-" sustavskih gre¹aka.\n"
-"Da li ¾elite napraviti proizvoljnu boot disketu za va¹ sustav?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "®alim, meðutim disketni pogon nije dostupan"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Izaberite disketni pogon koji ¾elite koristiti za izradu boot diskete"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Umetnite disketu u pogon %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Stvaram boot disketu"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Pripremam bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Èini se da imate OldWorld ili Nepoznato\n"
-" raèunalo, yaboot bootloader neæe moæi raditi kod vas.\n"
-"Instalacija æe nastaviti, ali æete morati\n"
-" koristiti BootX da podignete va¹e raèunalo"
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Da li ¾elite koristiti aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Gre¹ka prilikom instalacije aboot-a, \n"
-"probati nasilno instalirati iako to mo¾e uni¹titi prvu particiju?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Instaliraj bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Instalacija bootloader-a nije uspjela. Prijavljena je slijedeæa gre¹ska:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Trebati æete promjeniti Otvoreni Firmware boot-ureðaj kako bi\n"
-" omoguæili bootloader. Ukoliko ne ¾elite vidjeti bootloader prompt pri\n"
-" podizanju, pritisnite Command-Option-O-F pri podizanju i unesite:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Tada napi¹ite: shut-down\n"
-"Pri slijedeæem podizanju trebali biste vidjeti prompt bootloader-a."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Nizak"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Srednji"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Visok"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Izaberite sigurnosni nivo"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Umetnite praznu disketu u pogon %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Pravim auto instalacijsku disketu"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Niste zavr¹ili sve korake.\n"
-"\n"
-"®elite li zaista zavr¹iti?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Èestitam, instalacija je kompletna.\n"
-"Uklonite boot medij i pritisnite return za ponovno podizanje.\n"
-"\n"
-"Za informacije o popravcima koji su raspolo¾ivi za ovo izdanje Mandrake "
-"Linux-a,\n"
-"konzultirajte Eratu raspolo¾ivu na http://www.mandrakelinux.com/.\n"
-"\n"
-"Informacije o konfiguriranju va¹eg sustava je raspolo¾ivo u poslije\n"
-"instalacijskom poglavlju od Official Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Napravi auto instalacijsku disketu"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Auto instalacija mo¾e biti potpuno automatska ukoliko ¾elite,\n"
-"u tom sluèaju æe preuzeti hard disk!!\n"
-"(ovo znaèi za instalaciju na drugo raèunalo).\n"
-"\n"
-"Mo¾ete preferirati da ponovite instalaciju.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automatski"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Ponovno prika¾i"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Spremi odabir paketa"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux instalacija %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> izmeðu elemenata  | <Space> bira | <F12> slijedeæi zaslon"
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu nedostaje"
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "Izaberite akciju"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Napredno"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Molim prièekajte"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Pro¹iri stablo"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Sa¾mi stablo"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Prebaci izmeðu ravno i grupno sortiranog"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Dvosmislenost (%s), budite precizniji\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Krivi izbor, poku¹ajte ponovo\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (uobièajeno %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Va¹ izbor? (uobièajeno %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Va¹ izbor? (uobièajeno %s unesite `none' za nijedan)"
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Èe¹ka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Njemaèka"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "©panjolska"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Finska"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Francuska"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norve¹ka"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Poljska"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Ruska"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "©vedska"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "UK tipkovnica"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "US tipkovnica"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Albanska"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armenska (stara)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armenska (pisaæa ma¹ina)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armenska (fonetska)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbejd¾anska (latinica)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belgijska"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bugarska"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilska (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Bjeloruska"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "©vicarska (Njemaèki raspored)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "©vicarska (francuski raspored)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Èe¹ka (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Njemaèka (bez mrtvih tipaka)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Danska"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (USA)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norve¹ka)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estonska"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzijska  (\"Ruski\" raspored)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzijska  (\"Latin\" raspored)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Grèka"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Maðarska"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Hrvatska"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Izraelska"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Izraelska (fonetska)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iranska"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islandska"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Talijanska"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japanska (106 tipaka)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Korejska tipkovnica"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latino amerièka"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituanska AZERTY (stara)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituanska AZERTY (nova)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituanska \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituanska \"fonetska\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "Lokacija"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Makedonska"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Nizozemska"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Poljska (qwerty raspored)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Poljska (qwertz raspored)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugalska"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Kanadska (Quebec)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Rumunjska (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Rumunjska (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Ruska (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Slovenska"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaèka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaèka (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbejd¾anska (æirilica)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Tajlandska tipkovnica"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Tajlandska tipkovnica"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turska (tradicionalni \"F\" model)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turska (moderna  \"Q\" model)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukrajinska"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "US keyboard (internacionalna)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vijetnamska \"numeric row\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavenska (latinièno/èirilièno)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Kru¾no montiranje %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Ukloni logièki volumen prvo\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - mi¹"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standardno"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generièki PS2 mi¹ s kotaèiæem"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 gumb"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Generièki"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Kotaèiæ"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "serijski"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Generièki mi¹ s 2 gumba"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Generièki mi¹ s 3 gumba"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC serije"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Serije"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mi¹ (serijski, stari C7 tip)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmi¹"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 gumba"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 gumba"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "niti jedan"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Nema mi¹a"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Molimo istestirajte mi¹a."
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Za aktiviranje mi¹a,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "POMAKNITE VA© KOTAÈIÆ!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Zavr¹i"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Slijedeæe ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Prija¹nje"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Da li je ovo ispravno?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Spoji se na Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Najèe¹æi naèin da se pove¾ete sa adsl-om je pppoe.\n"
-"Neke veze koriste pptp, a nekoliko koriste dhcp.\n"
-"Ukoliko neznate, izaberite 'koristi pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "koristi dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "koristi pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "koristi pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Koji dhcp klijent ¾elite koristiti?\n"
-"Pretpostavljeni je dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nije pronaðen niti jedan mre¾ni adapter na va¹em sustavu.\n"
-"Ne mogu postaviti ovu vrstu veze."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Odaberite mre¾ni meðusklop"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Molimo izaberite sa kojim mre¾nim adapterom se ¾elite prikljuèiti na Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ne mogu pronaæi niti jednu mre¾nu karticu"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Pode¹avam mre¾u"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Molim unesite ime raèunala ukoliko ga znate.\n"
-"Neki DHCP serveri zahtjevaju specifiranje imena raèunala da bi radili.\n"
-"Va¹e ime raèunala bi trebalo biti potpuno-kvalificirano ime raèunala,\n"
-"kao ¹to je ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Ime raèunala"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Èarobnjak mre¾nih postavki"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Vanjski ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interna ISDN kartica"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Kakav tip ISDN veze koristite ?"
-
-#: ../../network/isdn.pm_.c:45
-#, fuzzy
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Koju ISDN konfiguraciju preferirate?\n"
-"\n"
-"* Potpuna konfiguracija koristi isdn4net. Ona sadr¾ava sna¾ne alate, ali je "
-"te¾a poèetnicima za konfiguriranje, i nije standardna.\n"
-"\n"
-"* Laka konfiguracija je lak¹a za razumjeti, standardnija, ali sa manje "
-"alata.\n"
-"\n"
-"Preporuèamo laku konfiguraciju.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Potpuna konfiguracija (isdn4net)"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Potpuna konfiguracija (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN postavke"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Izaberite va¹eg pru¾atelja Internet usluga.\n"
-" Ako nije na popisu odaberite Drugi"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Boot protokol"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Ostatak svijeta"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Ostatak svijeta \n"
-" bez D-kanala (za iznajmljene linije)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Koji protokol ¾elite koristiti ?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Kakvu karticu posjedujete?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Ne znam"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Ukoliko imate ISA karticu, vrijednosti na slijedeæem zaslonu trebale bi biti "
-"dobre.\n"
-"\n"
-"Ukoliko imate PCMCIA karticu, morate znati irq i io va¹e kartice.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Prekini"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Nastavi"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Kakvu ISDN karticu imate?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Prona¹ao sam ISDN PCI karticu meðutim ne znam kojeg je tipa. Molim izaberite "
-"va¹u PCI karticu na slijedeæem ekranu."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nisam na¹ao niti jednu ISDN PCI karticu. Molim izaberite va¹u PCI karticu na "
-"slijedeæem ekranu."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Izaberite serijski port na kojemu se nalazi modem."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Podesi dialup"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Ime veze"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Telefonski broj"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Prijavno ime"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Temeljem skripta"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Terminal-zasnovano"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Ime domene"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Prvi DNS poslu¾itelj (opciono)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Drugi DNS poslu¾itelj (opciono)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Mo¾ete iskljuèiti ili ponovno konfigurirati va¹u vezu."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Mo¾ete ponovno konfigurirati va¹u vezu."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Trenutno ste spojeni na internet."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Mo¾ete se spojiti na Internet ili ponovno konfigurirati va¹u vezu."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Niste trenutno spojeni na Internet."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Spoji se na Internet"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Prekini vezu na Internet"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Postavke mre¾nih veza (LAN ili Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Internet veza i postava"
-
-#: ../../network/netconnect.pm_.c:96
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Mo¾ete iskljuèiti ili ponovno konfigurirati va¹u vezu."
-
-#: ../../network/netconnect.pm_.c:105
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Mo¾ete iskljuèiti ili ponovno konfigurirati va¹u vezu."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Mre¾ne postavke"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Po¹to radite mre¾nu instalaciju, va¹a mre¾a je veæ konfigurirana.\n"
-"Pritisnite U redu da zadr¾ite postojeæe postavke, ili Odustani za ponovno "
-"konfiguriranje va¹e mre¾ne/Internet veze.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Dobro Do¹li u Èarobnjak za pode¹avanje mre¾e\n"
-"\n"
-"Sada æemo konfigurirati va¹u internet/mre¾nu vezu.\n"
-"Ukoliko ne ¾elite koristiti auto detekciju, odselektirajte kvadratiæ s "
-"potvrdom.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Izaberite profil za konfiguriranje"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Koristi auto detekciju"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Otkrivanje ureðaja..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Normalna modemska veza"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "detektiran na portu %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN veza"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "detektirano %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, fuzzy
-msgid "ADSL connection"
-msgstr "LAN veza"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "detektirano na meðusklopu %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Kablovska veza"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "detektirana kablovska veza"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "LAN veza"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "ethernet kartica(e) pronaðene"
-
-#: ../../network/netconnect.pm_.c:190
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Izaberite alat koje ¾elite koristiti"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:215
-#, fuzzy
-msgid "Internet connection"
-msgstr "Dijeljenje Internet Veze"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Da li ¾elite pokreniti va¹u vezu kod svakog podizanja (boot) sustava ?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Mre¾ne postavke"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Problem se pojavio prilikom ponovnog pokretanja mre¾e: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Èestitam, mre¾na i internet konfiguracija je zavr¹ena.\n"
-"\n"
-"Konfiguracija æe sada biti primjenjena na va¹em sustavu.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Nakon ¹to je to napravljeno, preporuèamo da ponovno pokrenete va¹e X\n"
-"okru¾je kako bi izbjegli probleme prilikom promjene imena raèunala."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"UPOZORENJE: Ovaj ureðaj je bio prethodno konfiguriran za spajanje na "
-"Internet.\n"
-"Jednostavno prihvatite ovaj ureðaj konfiguriran.\n"
-"Promjena polja ni¾e æe prepisati ovu konfiguraciju."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Molim unesite IP postavke za ovaj stroj.\n"
-"Svaka stavka treba biti unesena kao  IP adresa odvojena\n"
-"toèkama (npr. 1.2.3.4)"
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Pode¹avam mre¾ni ureðaj %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (upravljaèki program %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP adresa"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Netmaska"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Automatski IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa treba biti oblika 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Molim unesite ime raèunala.\n"
-"Ime raèunala treba biti puno ime raèunala,\n"
-"primjerice mojeracunalo.odjel.domena.hr.\n"
-"Takoðer unesite IP adresu gateway raèunala ako gateway postoji"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS poslu¾itelj"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Gateway ureðaj"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Postava proxy-a"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Proxy treba biti http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Proxy treba biti ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Postava Interneta"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Da li ¾elite poku¹ati spajanje na Internet ?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Testiram va¹u vezu..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Sustav je sada spojen na Internet."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Zbog sigurnosnih razloga, biti æe sada odspojen."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Èini se kako sustav nije spojen na internet.\n"
-"Probajte ponovno podesiti va¹u vezu."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Postava Veze"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Molim ispunite ili provjerite vrijednost doljnjeg polja"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ kartice"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Memorija kartice (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "IO kartice"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "IO_0 kartice"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "IO_1 kartice"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Va¹ osobni telefonski broj"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Ime ISP pru¾atelja (npr. provider.hr)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Telef. broj pru¾atelja"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "Pru¾ateljev DNS 1 (opciono)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "Pru¾ateljev DNS 2 (opciono)"
-
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "Odaberite tipkovnicu"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Naèin biranja"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-#, fuzzy
-msgid "Connection speed"
-msgstr "Tip veze: "
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Tip veze: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Korisnièko ime"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Korisnièka Lozinka"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Pro¹irene particije nisu podr¾ane na ovoj platformi"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Imate rupu u svojoj particijskoj tablici meðutim ja je ne mogu iskoristiti.\n"
-"Jedino rje¹enje je da pomaknete va¹u primarnu particiju kako bi rupa bila\n"
-"odmah do pro¹irenih particija."
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Vraæanje iz datoteke %s nije uspjelo: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Lo¹a backup datoteka"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Gre¹ka prilikom pisanja u datoteku %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Ne¹to lo¹e se de¹ava sa va¹im pogonom. \n"
-"Test za provjeru integriteta podataka je neuspje¹an. \n"
-"To znaèi da pisanje bilo èega na va¹ disk rezultira sluèajnim smeæem"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "potrebno"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "va¾no"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "vrlo lijepo"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "lijepo"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "mo¾da"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Lokalni pisaè"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Postavke udaljenog pisaèa"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Udaljeni CUPS poslu¾itelj"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Udaljeni lpd poslu¾itelj"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Mre¾ni pisaè (socket)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Ispisni poslu¾itelj"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "URI Ureðaja pisaèa"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modul %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Odaberite vezu pisaèa"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kako je pisaè povezan?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"Sa udaljenim CUPS poslu¾iteljem, ne morate konfigurirati\n"
-"nijedan pisaè ovdje; pisaèi æe biti automatski detektirani.\n"
-"U sluèaju nedoumice. izaberite \"Udaljeni CUPS poslu¾itelj\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Niti jedan"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Izaberite uobièajenog korisnika:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Zatvori"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "Postavke udaljenog pisaèa"
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresa treba biti oblika 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Broj porta bi trebao biti numerièki"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "Lokalni pisaè"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "IP CUPS poslu¾itelja"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Postava Stila Podizanja"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Otkrivanje ureðaja..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Isku¹aj portove"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Pisaè, model \"%s\", je otkriven na "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Ureðaj lokalnog pisaèa"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Na koji ureðaj je va¹ pisaè spojen \n"
-"(napomena: /dev/lp0 je jednak LPT1:)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Ureðaj pisaèa"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Èitam CUPS bazu upravljaèkih programa..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Postavke udaljenog lpd pisaèa"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Ukoliko ¾elite koristiti udaljeni lpd red morate unijeti\n"
-"ime ispisnog poslu¾itelja te ime reda na poslu¾itelju\n"
-"na koji ¾elite ispisivati."
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "Udaljeno raèunalo"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Postavke udaljenog pisaèa"
-
-#: ../../printerdrake.pm_.c:320
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Udaljeno raèunalo"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Udaljeno raèunalo"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Postavke SMB (Windows 9x/NT) pisaèa"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Za ispis na SMB pisaè, trebate navesti\n"
-"ime SMB domaæina (Primjetite da mo¾e biti razlièit od TCP/IP imena "
-"raèunala)\n"
-"i vjerojatno IP adresu poslu¾itelja pisaèa, kao i\n"
-"ime dijeljenog resursa za pisaè kojem ¾elite pristupiti i bilo koje\n"
-"primjenjivo korisnièko ime, lozinku ili informacije o radnoj grupi."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "SMB poslu¾itelj"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "IP SMB poslu¾itelja"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Ime sharea"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Radna grupa"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "Postavke NetWare pisaèa"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Za ispis na NetWare pisaè, trebate navesti\n"
-"NetWare ime poslu¾itelja pisaèa (Primjetite da mo¾e biti razlièit od\n"
-"njegovog TCP/IP imena raèunala!) kao i ime ispisnog reda za piaè koji\n"
-"¾elite pristupiti kao i primjenjivo korisnièko ime i lozinku."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Ispisni poslu¾itelj"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Ime reda pisaèa"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Opcije socket pisaèa"
-
-#: ../../printerdrake.pm_.c:528
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Za ispis na socket pisaè, trebate navesti \n"
-"ime poslu¾itelja od printera te opciono broj porta."
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "Ime poslu¾itelja printera"
-
-#: ../../printerdrake.pm_.c:537
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Ime poslu¾itelja printera"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "URI Ureðaja pisaèa"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Ime pisaèa"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Opis"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Lokacija"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Èitam CUPS bazu upravljaèkih programa..."
-
-#: ../../printerdrake.pm_.c:793
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Veza pisaèa"
-
-#: ../../printerdrake.pm_.c:794
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Kakav tip pisaèa posjedujete?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Postavke modema"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Postava Interneta"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Da li ¾elite isku¹ati pisaè?"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "Isku¹aj portove"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-#, fuzzy
-msgid "No test pages"
-msgstr "Da, ispi¹i obje probne stranice"
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "Pisaè"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standardni alati"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Ispisujem probnu stranicu(e)..."
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "Ispisujem probnu stranicu(e)..."
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Ispisujem probnu stranicu(e)..."
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Probna stranica(e) poslana je na pisaè.\n"
-"Ponekad je potrebno par sekundi prije nego pisaè poène s ispisom.\n"
-"Stanje ispisa:\n"
-"%s\n"
-"\n"
-"Da li sve radi kako treba?"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Probna stranica(e) poslana je na pisaè.\n"
-"Ponekad je potrebno par sekundi prije nego pisaè poène s ispisom.\n"
-"Da li sve radi kako treba?"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Nema pisaèa"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Onemoguæujem mre¾u"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "Postavke pisaèa"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Èitam CUPS bazu upravljaèkih programa..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Postava Interneta"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Ime pisaèa mo¾e sadr¾avati samo slova, brojeve i podvlaku"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "Nema pisaèa"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Èitam CUPS bazu upravljaèkih programa..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Postavke pisaèa"
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Pokreæem va¹u vezu..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Podesi mre¾u"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Niste podesili monitor"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Pode¹avam mre¾u"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Koji ispisni sustav ¾elite koristiti?"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Visok"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoidan"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Koji ispisni sustav ¾elite koristiti?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Odaberite vezu pisaèa"
-
-#: ../../printerdrake.pm_.c:1728
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Koji ispisni sustav ¾elite koristiti?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Podesi pisaè"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Postavke pisaèa"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Èitam CUPS bazu upravljaèkih programa..."
-
-#: ../../printerdrake.pm_.c:1845
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Da li ¾elite podesiti pisaè?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Normalni mod"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Uobièajeno)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Udaljeni CUPS poslu¾itelj"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "Udaljeni CUPS poslu¾itelj"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-#, fuzzy
-msgid "Add printer"
-msgstr "Nema pisaèa"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Da li ¾elite isku¹ati postavu ?"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Postavke modema"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Dijeljenje Internet Veze"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Veza pisaèa"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "Ispisujem probnu stranicu(e)..."
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "Postavke udaljenog pisaèa"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Èitam CUPS bazu upravljaèkih programa..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Da li ¾elite ponovno pokrenuti mre¾u?"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Èitam CUPS bazu upravljaèkih programa..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Postava proxy-a"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Dobro do¹li u pomoæni program za konfiguriranje proxy-a.\n"
-"\n"
-"Ovdje æete moæi postaviti va¹ http i ftp proxi-e\n"
-"sa ili bez logina i lozinke\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Molimo popunite http proxy informacije\n"
-"Molimo ostavite prazno ukoliko ne ¾elite http proxy"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url treba poèeti sa 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Broj porta bi trebao biti numerièki"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Molimo unesite ftp proxy informacije\n"
-"Ostavite prazno ukoliko ne ¾elite ftp proxy"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url treba poèeti sa 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Molimo unesite proxy login i lozinku ukoliko postoje.\n"
-"Ostavite prazno ako ne ¾elite login/lozinku"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "lozinka"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "ponovno unesite lozinku"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Lozinke se ne podudaraju. Poku¹ajte ponovno!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ne mogu dodati particiju na _formatirani_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ne mogu pisati u datoteku %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid nije uspio"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid nije uspio (mo¾da niste instalirali raidtools alate?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nema dovoljno particija za RAID nivo %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Pokreni ALSA (Naprednu Linux Zvuènu Arhitekturu) zvuèni sustav"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron periodno zakazivanje komandi"
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd slu¾i za monitoriranje statusa i baterije i njegovo logiranje putem "
-"syslog-a.\n"
-"Takoðer mo¾e biti kori¹ten za ga¹enje raèunala kada je baterija slaba."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Pokreæe komande zakazane sa at komandom u specifirano vrijeme kada\n"
-"je at pokrenut, i pokreæe batch komande kada je prosjeèna zauzetost dovoljno "
-"niska."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je standardan UNIX program koji pokreæe korisnièki definirane programe\n"
-"u periodièno zakazana vremena. vixie cron dodaje veliki broj korisnih "
-"funkcija obiènom UNIX cron-u, ukljuèujuæi bolju sigurnost i veæu snagu "
-"konfiguracijskih opcija."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM dodaje podr¹ku za mi¹u tekst baziranim Linux aplikacijama kao ¹to je\n"
-"Midnight Commander. Takoðer pru¾a mi¹ baziranim konzolama odre¾i-i-zalijepi "
-"operacije,\n"
-"i ukljuèuje podr¹ku za iskoèive menije u konzoli."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake pokreæe isprobavanje hardware-a, i opciono konfigurira\n"
-"novi/promjenjeni hardware."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache je World Wide Web poslu¾itelj. Koristi se za poslu¾ivanje HTML\n"
-"dokumenata i CGI skripti."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver demon (najèe¹æe zvan inetd) pokreæe \n"
-"razne druge internet servise po potrebi. Odgovoran je za pokretanje \n"
-"mnogo servisa, ukljuèujuæi telnet, ftp, rsh, i rlogin. Iskljuèivanje inetd-"
-"a\n"
-"onemoguèuje sve servise za koje je zadu¾en."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Pokreæe paketno filtriranje za Linux kernel 2.2 serije, za postavljanje\n"
-"vatrozida za za¹titu va¹eg raèunala od mre¾nih napada."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ovaj paket uèitava odabranu tastaturnu mapu kao ¹to je postavljenu u\n"
-"/etc/sysconfig/keyboard. Ona se mo¾e odabrati koristeæi kbdconfig alat.\n"
-"Trebali biste ostaviti ovo ukljuèeno za veæinu raèunala."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatsko regeneriranje kernel header-a u /boot za\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatska detekcija i konfiguracija hardware-a pri podizanju."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf æe ponekada urediti izvr¹avanje raznih radnji\n"
-"pri samom podizanju kako bi odr¾ao sustavsku konfiguraciju."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je daemon za ispis koji je potreban od lpr-a kako bi radio ispravno.\n"
-"On je pojednostavljeno poslu¾itelj koji ¹alje ispisne poslove pisaèu(ima)."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtualni Poslu¾itelj, koristi se za pravljenje visoko raspolo¾ivog\n"
-"poslu¾itelja visokih performansi."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) je Domain Name Server (DNS) poslu¾itelj koji se upotrebljava\n"
-"za razluèivanje imena raèunala u IP adrese."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Montira i Demontira sve Mre¾ne datoteène sustave (NFS), SMB (Lan\n"
-"Manager/Windows), i NCP (NetWare) toèke montiranja."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivira/Deaktivira sva pode¹ena mre¾na suèelja prilikom pokretanja\n"
-"sustava."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka putem TCP/IP mre¾a.\n"
-"Ovaj servis pru¾a NFS poslu¾iteljsku funkcionalnost, koji se konfigurira\n"
-"putem /etc/exports datoteke."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka putem TCP/IP mre¾a.\n"
-"Ovaj servis pru¾a funkcionalnost NFS datoteènog zakljuèavanja."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatski ukljuèuje numlock tipku u konzoli i\n"
-"XFree-u pri podizanju."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podr¾ava OKI 4w i kompaktibilne win pisaèe."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA podr¹ka je obièno za podr¾avanje stvari poput ethernet i\n"
-"modema u laptopima. Ona neæe biti pokrenuta ukoliko nije tako\n"
-" konfigurirana zato je sigurno pokrenuti ju iako na instaliranom\n"
-" raèunalu ne treba."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper ureðuje RPC vezama, koje su kori¹tene u protokolima\n"
-"poput NFS-a ili NIS-a. Portmap poslu¾itelj mora biti pokrenut na raèunalima\n"
-"koji su poslu¾itelji za protokole koji se slu¾e RPC mehanizmima."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix je Mail Transport Agent, koji je program koji\n"
-"¹alje mail-ove sa jedne ma¹ine na drugu."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Sprema i vraæa sustavsku entropiju za veæu kvalitetu generiranja\n"
-"sluèajnih brojeva."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Dodjeljuje raw ureðaje (kao ¹to su hard disk\n"
-"particije), za uporabu u aplikacijama kao ¹to su Oracle"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed daemon omoguæava automatsku IP ruter tablicu koja se obnavlja\n"
-"putem RIP protokola. Dok se RIP naj¹ire koristi na malim mre¾ama, vi¹e "
-"kompleksniji\n"
-"ruting protokoli su potrebni za kompleksnije mre¾e."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Rstat protokol omoguæava korisnicima na mre¾i da dohvate\n"
-"mjerljive performanse za svako raèunalo koje je na mre¾i."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Rusers protokol omoguæava korisnicima na mre¾i da identificira tko je\n"
-"prijavljen na drugim raèunalima koja odgovaraju."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Rwho protokol omoguæava udaljenim korisnicima da dobiju popis svih\n"
-"korisnika prijavljenih na raèunalo na kojima je pokrenut rwho (slièno finger-"
-"u)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Pokreni zvuèni sustav na va¹em raèunalu"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog je resurs kojega koriste mnogi demoni kako bi logirali poruke\n"
-"u razlièite sustavske log datoteke. Dobra je ideja uvijek imati pokrenuti "
-"syslog."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Uèitava upravljaèke programe za va¹e usb ureðaje."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Pokreæe X Pismovni Poslu¾itelj (ovo je nu¾no za XFree da se pokrene)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Izaberite koji servisi trebaju biti startani automatski kod boot-a"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "Pisaè"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "Sistemski mod"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Postavke udaljenog lpd pisaèa"
-
-# ../../share/compssUsers
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Baze"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "ureðaj"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "pokreæem"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "zaustavljen"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servisi i daemoni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Nema dodatnih informacija\n"
-"o ovom servisu, ¾alim."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Pri pokretanju"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instaliram paket %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ne mogu proèitati va¹u particijsku tablicu, previ¹e je uni¹tena za mene :(\n"
-"Poku¹ati æu sa brisanjem lo¹ih particija"
-
-#: ../../standalone/drakautoinst_.c:44
-#, fuzzy
-msgid "Error!"
-msgstr "Gre¹ka"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Postava nakon instalacije"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Postava Stila Podizanja"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Èestitke!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Dijeljenje Internet Veze"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Dijeljenje veze prema internetu je trenutno omoguæeno"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Postavljanje dijeljenja veze prema internetu je veæ napravljeno.\n"
-"Trenutno je omoguæeno.\n"
-"\n"
-"©to ¾elite napraviti?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "onemoguæi"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "odustani"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "ponovno postavi"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Onemoguæujem poslu¾itelje..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Dijeljenje veze prema Internetu je trenutno onemoguæeno."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Dijeljenje veze prema Internetu je trenutno onemoguæeno"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Postavljanje dijeljenja veze prema Internetu je veæ napravljeno.\n"
-"Trenutno je onemoguæeno.\n"
-"\n"
-"©to ¾elite napraviti?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "omoguæi"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Omoguæujem poslu¾itelje..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Dijeljenje veze prema internetu je trenutno omoguæeno."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Va¹e raèunalo mo¾e biti konfigurirano da dijeli vlastitu Internet vezu.\n"
-"Sa tom znaèajkom, druga raèunala na va¹oj lokalnoj mre¾i mogu koristiti "
-"Internet vezu ovog raèunala.\n"
-"\n"
-"Upozorenje: trebati æete primjenjeni Mre¾ni Ureðaj za postavljanje lokalne "
-"mre¾e (LAN)."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Meðusklop %s (koristi modul %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Meðusklop %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Nema mre¾nog adaptera na va¹em sustavu!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nije pronaðen niti jedan mre¾ni adapter na va¹em sustavu. Molimo pokrenite "
-"hardware-ski konfiguracijski alat."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Mre¾ni meðusklop"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Postoji samo jedan konfigurirani mre¾ni adapter na va¹em sustavu:\n"
-"\n"
-"%s\n"
-"\n"
-"Postaviti æu lokalnu mre¾u (LAN) sa tim adapterom."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Molimo odaberite koji mre¾ni adapter æe biti povezan na va¹u lokalnu mre¾u."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Upozorenje, va¹ mre¾ni adapter je veæ konfiguriran. Ponovno æu ga "
-"konfigurirati."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potencijalni LAN adresni konflikt je pronaðen u trenutnoj konfiguraciji %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Detektirana je vatrozidna konfiguracija!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Upozorenje! Postojeæa vatrozidna konfiguracija je pronaðena. Morati æete "
-"ruèno popraviti neke dijelove nakon instalacije."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Pode¹avam..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Pode¹avam skriptove, instaliram softver, pokreæem poslu¾itelje..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problem prilikom instaliranja paketa %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Sve je konfigurirano.\n"
-"Sada mo¾ete dijeliti va¹u internet vezu sa drugim raèunalima na va¹oj "
-"lokalnoj mre¾i, koristeæi automatsku mre¾nu konfiguraciju (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Postavljanje je veæ uraðeno, ali je trenutno onemoguæeno."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Postavljanje je veæ uraðeno, ali je trenutno omoguæeno."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Dijeljenje veze prema internetu nije bilo konfigurirano."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Postavke dijeljenja internet veze"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Dobro do¹li u alat za konfiguriranje dijeljenja Internet veze!\n"
-"\n"
-"%s\n"
-"\n"
-"Kliknite na Postavke ukoliko ¾elite pokreniti èarobnjak za postavljanja."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Mre¾ne postavke (%d adaptera)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Obri¹i profil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Profil za obrisati:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Novi profil..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Ime raèunala: "
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Internet pristup"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Tip:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Meðusklop:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Povezan"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Nije povezan"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Pove¾i..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Odspoji..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Pokreæem va¹u vezu..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Zatvaram va¹u vezu..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Veza nije zatvorena.\n"
-"Da li da ju poku¹am ruèno pokretanjem\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"u root-u."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Sustav je sada odspojen sa Interneta."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Pode¹avanje Internet Pristupa..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "LAN postavke"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Upravljaèki program"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Meðusklop"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "State"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Podesi lokalnu mre¾u..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Primjeni"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Molimo prièekajte... Primjenjujem konfiguraciju"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nemate niti jedan konfigurirani meðusklop.\n"
-"Konfigurirajte ga prvo klikanjem na 'Postavljanje'"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "LAN postavke"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Boot protokol"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Pokrenuto pri podizanju"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "activate now"
-msgstr "Aktivno"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "desactivate now"
-msgstr "Aktivno"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nemate niti jednu internet vezu.\n"
-"Napravite jednu klikanjem na 'Podesi'"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Postava Internet veze"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Postava Internet veze"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Tip veze: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parametri"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Ethernet kartica"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Dobrodo¹li Crackeri"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Slab"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoidan"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ova razina se treba koristiti sa pa¾njom. Ona èini va¹ sustav mnogo lak¹im "
-"za kori¹tenje,\n"
-"ali vrlo osjetljiv: ne smije biti kori¹ten za raèunala koja su povezana u "
-"mre¾i ili na Internet. Naime, nema lozinke za pristup."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Lozinke su sada ukljuèene meðutim jo¹ ne preporuèam kori¹tenje ovog raèunala "
-"u mre¾nom okoli¹u."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Nekoliko pobolj¹anja za ovu sigurnosnu razinu, glavno pobolj¹anje je \n"
-"da postoji vi¹e sigurnosnih upozorenja i provjera."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Ovo je standardna sigurnosna razina preporuèena za raèunala koja èe biti "
-"kori¹tena\n"
-"za spajanje na Internet kao klijent. Sada postoje sigurnosne provjere. "
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Sa ovom sigurnosnom razinom, kori¹tenje ovog sustava kao poslu¾itelj postaje "
-"moguæe.\n"
-"Sigurnost je sada toliko visoka da se sustav mo¾e koristiti kao poslu¾itelj\n"
-"koji prima konekcije od mnogo klijenta. "
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Uzimamo znaèajke 4 razine, ali sada je sustav potpuno zatvoren.\n"
-"Sigurnosne znaèajke su na njihovim maksimumima."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "Pode¹avam sigurnosni nivo"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Postavke poslu¾itelja"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Pode¹avam sigurnosni nivo"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrolni Centar"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Izaberite alat koje ¾elite koristiti"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uporaba: keyboarddrake [--exper] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Da li ¾elite da BackSpace vrati Delete u konzoli?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Promjeni Cd-Rom"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Molimo ubacite Instalacijski Cd-Rom u va¹ pogon i pritisnite U redu kada ste "
-"zavr¹ili.\n"
-"Ukoliko ga nemate, pritisnite Odustani kako bi izbjegli ¾ivu nadogradnju."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ne mogu pokrenuti ¾ivu nadogradnju !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "niti jedan serial_usb nije pronaðen\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Emuliranje treæe tipke?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Vatrozidne postave"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Vatrozidne postave"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Vatrozidi\n"
-"\n"
-"Veæ ste postavili vatrozid.\n"
-"Kliknite na Podesi za promjenu ili brisanje vatrozida"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Vatrozidi\n"
-"\n"
-"Kliknite na Podesi za postavljanje standardnog vatrozida"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Odaberite jezik"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Odaberite razred instalacije"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Otkrivanje hard diskova"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Podesi mi¹"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Odaberite tipkovnicu"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sigurnost"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Podesi datoteène sustave"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatiraj particije"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Izabir instaliranih paketa"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instaliraj sustav"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Dodaj korisnika"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Podesi mre¾u"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Pode¹avanje servisa"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Napravi boot disketu"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Instaliraj bootloader"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Podesi X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Izlaz iz instalacije"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall pode¹avanje\n"
-"\n"
-"Ovo pode¹ava osobni vatrozid za ovo Mandrake Linux raèunalo.\n"
-"Za sna¾no primjenjena vatrozidna rje¹enja, molimo pogledajte\n"
-"specijaliziranu MandrakeSecurity Firewall distribuciju."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Sada æemo vas pitati nekoliko pitanja o servisima koje ¾elite dozvoliti\n"
-"Internetu da se spoji. Molimo razmislite pa¾ljivo o tim\n"
-"pitanjima, jer sigurnost va¹eg raèunala je va¾na.\n"
-"\n"
-"Molimo, ukoliko ne koristite trenutno jedan od tih servisa, postavite\n"
-"vatrozid. Mo¾ete promjeniti ovu konfiguraciju bilo kad za¾elite\n"
-"pokretanjem ponovno ove aplikacije!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut web poslu¾itelj na ovom raèunalu kojeg treba cijeli\n"
-"Internet vidjeti? Ukoliko trebate web poslu¾itelj kojemu æe biti pristupan\n"
-"samo sa ovog raèunala, mo¾ete sigurno odgovoriti NE ovdje.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut imenski poslu¾itelj na ovom raèunalu? Ukoliko niste "
-"postavili jedan\n"
-"da daje IP i informacije o zoni cijelom Internet-u, molimo\n"
-"odgovorite ne.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Da li ¾elite omoguæiti dolazeæe Secure Shell (ssh) veze? To je\n"
-"je telnet zamjena ¹to mo¾ete koristiti za prijavljivanje. Ako sada "
-"koristite\n"
-"telnet, trebali biste definitivno se prebaciti na ssh. telnet nije\n"
-"enkriptiran -- tako da neki napadaèi mogu ukrasti va¹e lozinke ako ga "
-"koristite\n"
-"ssh je enkriptiran i nedozvoljava prislu¹kivanje (sniffanje)."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Da li ¾elite dopustiti dolazeæe telnet veze?\n"
-"Ovo je u¾asno nesigurno, kao ¹to smo objasnili na prethodnom zaslonu. Mi\n"
-"jako preporuèamo odgovaranjem Ne ovdje i kori¹tenjem ssh-a umjesto\n"
-"telnet-a.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Da li imate pokrenut FTP poslu¾itelj ovdje koji treba biti dostupan\n"
-"Internet-u? Ukoliko da, jako preporuèamo da ga koristite samo za\n"
-"anonimni prijenos. Svaka lozinka prenesena FTP-om mo¾e biti ukradena od\n"
-"nekih napadaèa, jer FTP takoðer ne koristi enkripciju za prijenos lozinki.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut mail poslu¾itelj ovdje? Ako ¹aljete va¹e \n"
-"poruke kroz pine, mutt ili neki drugi tekst-bazirani mail klijent,\n"
-"vjerojatno ga koristite. Ako ne, trebali biste ga odijeliti vatrozidom.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut POP ili IMAP poslu¾itelj ovdje? Ovo mo¾e\n"
-"koristiti za poslu¾ivanje ne-web-baziranih mail raèuna za osobe preko\n"
-"ovog raèunala.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Èini se da imate pokrenut 2.2 kernel. Ukoliko je va¹a IP\n"
-"adresa automatski postavljena u va¹em domu ili uredu\n"
-"(dinamièki dodjeljenja), moramo to dozvoliti. Da\n"
-"li je to sluèaj?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Da li se va¹e raèunalo vremenski sinkronizira sa drugim raèunalom?\n"
-"Veæinom, ovo se koristi kod srednje-velikih Unix/Linux organizacija\n"
-"za sinkronizaciju vremena za zapisivanje/logiranje i slièno. Ukoliko\n"
-"niste dio veæeg ureda ili niste èuli za ovo, vjerojatno\n"
-"ne."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Pode¹avanje zavr¹eno. Mo¾emo li zapisati ove promjene na disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ne mogu otvoriti %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ne mogu otvoriti %s za pisanje: %s\n"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Mre¾no raèunalo (klijent)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS poslu¾itelj, SMB poslu¾itelj, Proxy poslu¾itelj, SSH poslu¾itelj"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Ured"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome radna stanica"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Alati za va¹ Palm Pilot ili va¹ Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Radna stanica"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Vatrozid/Ruter"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Ime Domene i Mre¾ni Informacijki Poslu¾itelj (NIS)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Uredski programi: tekst procesori (kword, abiword), tablièni kalkulatori "
-"(kspread, gnumeric), pdf preglednici, itd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio-namjenjeni alati: mp3 ili midi sviraèi, mikseri, itd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knjige i Howto-i o Linux-u i slobodnom software-u"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE radna stanica"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itd"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedija - Video"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Skup alata za mail, news, web, datoteèni prijenos, i razgovor"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Baze"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL ili MySQL poslu¾itelj baza"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Alati za lako pode¹avanje va¹eg raèunala"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedija - Zvuk"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Pomoæni programi"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentacija"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konzolni Alati"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix mail poslu¾itelj, Inn news poslu¾itelj"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet stanica"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedijska stanica"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN postavke"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Vi¹e grafièkih radnih okru¾ja (Gnome, IceWM)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Radno Okru¾je, osnovno grafièko okru¾je sa kolekcijom pripadajuæih alata"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafièko Okru¾je"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Razvoj"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache i Pro-ftpd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Alati za pravljenje i pr¾enje CD-a"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Uredska radna stanica"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, itd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafièki programi poput Gimp-a"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C i C++ razvojne biblioteke, programi i ukljuèujuæe datoteke"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Mre¾ni raèunalni poslu¾itelj"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Igraèka radna stanica"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video playeri i ureðivaèi"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedija - Grafika"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Zabavni programi: arkade, ploèe, strategije, itd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Pribor alata za èitanje i slanje mail-a i news-a (pine, mutt, tin..) i za "
-"pregled Web-a"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arhiviranje, emulatori, praæenje"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Osobne financije"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafièka okru¾ja sa korisnièki prijateljskim skupom aplikacija i alatima za "
-"radno okru¾je"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klijenti za razne protokole ukljuèujuæi ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet gateway"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Zvuèni i video sviraèki/ureðivaèki programi"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Druga grafièka radna okru¾ja"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Ureðivaèi, ljuske, datoteèni alati, terminali"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programi za ureðivanje va¹ih financija, poput gnucash-a"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Igre"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Osobni informacijski menad¾ment"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedija - CD pr¾enje"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Znanstvena radna stanica"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "ne mogu otvoriti /etc/sysconfig/autologin za èitanje: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Da li ¾elite ponovno pokrenuti mre¾u?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Da li se sla¾ete?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Poku¹avam ponovno pokrenuti mre¾ni ureðaj:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Poku¹avam ponovno pokrenuti mre¾ni ureðaj %s. Da li se sla¾ete?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Ako niste sigurni uobièajeni izbor je \"/dev/hda\" (primarni \n"
-#~ "master IDE disk) ili \"/dev/sda\" (prvi SCSI disk)."
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Slijedeæe su redovi pisaèa.\n"
-#~ "Mo¾ete dodati jo¹ koji ili urediti postojeæi."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Tip veze: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Izaberite uobièajenog korisnika:"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Molimo istestirajte mi¹a ovdje."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "Molimo, izaberite preferirani jezik za instalaciju i kori¹tenje sustava."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Trebate prihvatiti stavke gorenje licence da bi nastavili instalaciju.\n"
-#~ "\n"
-#~ "\n"
-#~ "Molimo kliknite na \"Prihvati\" ukoliko se sla¾ete sa njezinim stavkama.\n"
-#~ "\n"
-#~ "\n"
-#~ "Molimo kliknite na \"Odbij\" ukoliko se ne sla¾ete sa njezinim stavkama.\n"
-#~ "Instalacija æe zavr¹iti bez ikakvih promjena na va¹oj trenutnoj postavi."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr ""
-#~ "Izaberite raspored tipkovnice koji se podudara sa va¹om na gornjem popisu"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Ukoliko ¾elite drugi jezik (od onoga kojega ste odabrali\n"
-#~ "na poèetku instalacije) da bude raspolo¾iv poslije instalacije, molimo "
-#~ "odaberite ga u popisu gore. Ako ¾elite odabrati sve, izaberite samo \"Sve"
-#~ "\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Odaberite:\n"
-#~ "\n"
-#~ "  - Prilagoðeno: Ukoliko ste upoznati s Linuxom kori¹tenjem ove\n"
-#~ "opcije moæi æe te odabrati kakvu instalaciju ¾elite npr. normalna, "
-#~ "programer\n"
-#~ "ili poslu¾itelj. Odaberite \"Normalna\" za sustav opæe namjene.\n"
-#~ "Odaberite \"Programer\" ako ¾elite koristiti raèunalo primarno za razvoj\n"
-#~ "softvera ili odaberite \"Poslu¾itelj\" ako ¾elite koristiti raèunalo kao\n"
-#~ "poslu¾itelj opæe namjene npr. za mail, web, ispisivanje itd.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Struènjak: Ukoliko ste vrlo dobro upoznati sa Linuxom i ¾elite\n"
-#~ "imati potpunu kontrolu nad instalacijom Linuxa odaberite opciju\n"
-#~ "\"Struènjak\". Slièno kao i sa \"Prilagoðeno-m\" instalacijom moæi\n"
-#~ "æe te odabrati kako æe se sustav upotrebljavati meðutim sa dodatnim "
-#~ "opcijama."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Sada morate definirati upotrebu va¹eg raèunala. Izbori su:\n"
-#~ "\n"
-#~ "* Radna stanica: ovo je idealan izbor ukoliko planirate koristiti va¹e "
-#~ "raèunalo primarno za svakodnevno kori¹tenje, u uredu ili\n"
-#~ "  kod kuæe.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Razvoj: ukoliko planirate koristiti va¹e raèunalo primarno za razvoj "
-#~ "software-a, to je dobar izbor. Tada\n"
-#~ "  æete imati kompletnu kolekciju instaliranog software-a u pravilu da "
-#~ "kompajlirate, uklanjate gre¹ke, i formatirate izvorni kod,\n"
-#~ "  ili za pravljenje softwareskih paketa.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Poslu¾itelj: ukoliko planirate koristiti ovo raèunalo kao poslu¾itelj, "
-#~ "ovo je dobar izbor. Ili kao datoteèni poslu¾itelj (NFS ili\n"
-#~ "  SMB), poslu¾itelj pisaèa (Unix stil ili Microsoft Windows stil), "
-#~ "autentifikacijski poslu¾itelj (NIS), poslu¾itelj\n"
-#~ "  baze podataka i tako dalje. Kao takav, ne oèekujte da æe biti ljepote "
-#~ "(KDE, GNOME, itd.) instalirane."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Sada mo¾ete odabrati grupu paketa koje ¾elite\n"
-#~ "instalirati ili nadograditi.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX æe tada provjeriti da li imate dovoljno mjesta za instalaciju svih "
-#~ "odabranih. Ako ne,\n"
-#~ "upozoriti æe vas o tome. Ukoliko ¾elite nastaviti svejedno, on æe "
-#~ "nastaviti sa\n"
-#~ "instalacijom svih odabranih grupa, ali neæe instalirati neke pakete od "
-#~ "manjeg\n"
-#~ "interesa. Na kraju popisa mo¾ete izabrati opciju \n"
-#~ "\"Individualan izbor paketa\"; u tom sluèaju morati æete pregledati \n"
-#~ "vi¹e od 1000 paketa..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Sada mo¾ete izabrati individualno sve pakete koje\n"
-#~ "¾elite instalirati.\n"
-#~ "\n"
-#~ "\n"
-#~ "Mo¾ete pro¹iriti ili skupiti drvo klikajuæi na opcije u lijevom kutu\n"
-#~ "prozora od paketa.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko preferirate da vidite pakete sortirane po abecednom redu, "
-#~ "pritisnite na ikonu\n"
-#~ "\"Promjeni ravno i grupno sortirano\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko ne ¾elite biti upozoreni o ovisnosti, pritisnite na \"Automatsku\n"
-#~ "ovisnost\". Ako ¾elite to, primjetite da odznaèivanje jednog paketa mo¾e "
-#~ "tiho\n"
-#~ "odznaèiti nekoliko drugih paketa koji ovise o njemu."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Ako imate sve gore navedene CDove kliknite U redu.\n"
-#~ "Ako nemate niti jedan od tih navedenih CDa kliknite Odustani.\n"
-#~ "Ako imate samo neke od navedenih CDa odznaèite one koje nemate i kliknite "
-#~ "U redu."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Ukoliko ¾elite spojiti va¹e raèunalo na Internet ili\n"
-#~ "na lokalnu mre¾u molimo izaberite ispravnu opciju. Molimo ukljuèite va¹ "
-#~ "ureðaj\n"
-#~ "prije nego izaberete ispravnu opciju kako bi ga DrakX automatski "
-#~ "prepoznao.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ako nemate niti jednu vezu na Internet ili na lokalnu mre¾u, izaberite\n"
-#~ "\"Onemoguæi umre¾avanje\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko ¾elite konfigurirati mre¾u kasnije poslije instalacije ili ako "
-#~ "ste \n"
-#~ "zavr¹ili sa konfiguriranjem va¹e mre¾ne veze, izaberite \"Zavr¹i\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Nije pronaðen modem. Molimo izaberite serijski port na kojem je "
-#~ "prikljuèen.\n"
-#~ "\n"
-#~ "\n"
-#~ "Za informaciju. prvi serijski port (nazvan \"COM1\" pod Microsoft\n"
-#~ "Windows-ima) se zove \"ttyS0\" pod Linux-om."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Sada mo¾ete unijeti opcije za pozivanje ISP-a. Ukoliko neznate\n"
-#~ "ili niste sigurni ¹to unijeti, ispravne informacije mogu se dobiti od "
-#~ "va¹eg\n"
-#~ "pru¾atelja Internet usluga. Ukoliko ne unesete DNS (imenski poslu¾itelj)\n"
-#~ "informacije ovdje, te informacije æe biti dobivene od va¹eg pru¾atelja "
-#~ "Internet\n"
-#~ "usluga pri samom spajanju."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Ukoliko je va¹ modem vanjski modem, molimo ukljuèite ga sada kako bi ga "
-#~ "DrakX prona¹ao automatski."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Molimo ukljuèite va¹ modem i izaberite ispravan model."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Ukoliko niste sigurni da li su podaci gore\n"
-#~ "toèni ili neznate ¹to treba unijeti, ispravne informacije\n"
-#~ "mo¾ete dobiti od va¹eg pru¾atelja internet usluga. Ukoliko ne unesete\n"
-#~ "DNS (imenski poslu¾itelj) informacije ovdje, ta æe informacije biti "
-#~ "dobivena\n"
-#~ "od va¹eg pru¾atelja Internet usluga pri samom spajanju."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Sada mo¾ete unijeti ime va¹eg raèunala ukoliko je potrebno. Ukoliko ne\n"
-#~ "znate ili niste sigurni ¹to trebate unijeti, ispravne informacije mogu\n"
-#~ "biti dobivene od va¹eg pru¾atelja Internet usluga."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Sada mo¾ete konfigurirati va¹ mre¾ni ureðaj.\n"
-#~ "\n"
-#~ "  * IP adresu: ukoliko ne znate adresu pitajte svojeg mre¾nog "
-#~ "administratora ili  ISP-a.\n"
-#~ "    Ne biste trebali unijeti IP adresu ukoliko ste izabrali opciju "
-#~ "\"Automatskog IP-a\" ispod.\n"
-#~ "\n"
-#~ "  * Mre¾na maska: Obièno je maska \"255.255.255.0\" dobar izbor. Ako "
-#~ "niste sigurni \n"
-#~ "raspitajte se kod mre¾nog administratora.\n"
-#~ "\n"
-#~ "  * Automatski IP: Ukoliko va¹a mre¾a koristi BOOTP ili DHCP protokol, "
-#~ "odaberite ovu\n"
-#~ "opciju. U ovom sluèaju ne morate unijeti ni¹ta pod \"IP adresa\". Ako "
-#~ "niste sigurni\n"
-#~ "raspitajte se kod mre¾nog administratora."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Sada mo¾ete unijeti ime va¹eg raèunala ukoliko je potrebno. Ukoliko\n"
-#~ "ne znate ili niste sigurni ¹to unijeti, pitajte va¹eg mre¾nog "
-#~ "administratora."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Sada mo¾ete unijeti ime va¹eg raèunala ukoliko je potrebno. Ukoliko\n"
-#~ "ne znate ili niste sigurni ¹to unijeti, ostavite prazno."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Sada mo¾ete podesiti dial-up postavke. Ako niste sigurni ¹to treba\n"
-#~ "unijeti, raspitajte se kod svog ISP-a."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Ako ¾elite koristiti proxye unesite ih sada. Ako niste sigurni\n"
-#~ "da li imate proxye raspitajte se kod mre¾nog administratora ili ISP-a."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Sada mo¾ete instalirati kriptografske pakete ukoliko imate dobro pode¹enu "
-#~ "internetu vezu.\n"
-#~ "Prvo morate odabrati mirror sa kojeg æe te skinuti pakete i\n"
-#~ "nakon toga izabrati pakete koje ¾elite izabrati.\n"
-#~ "\n"
-#~ "\n"
-#~ "Primjetite da morate izabrati mirror i kriptografske pakete prema va¹em\n"
-#~ "zakonodavstvu."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Sada mo¾ete izabrati va¹u vremensku zonu po tome gdje ¾ivite."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Mo¾ete podesiti lokalni pisaè (spojen na va¹e raèunalo) ili udaljeni\n"
-#~ "pisaè (dostupan preko Unix, Netware ili Microsoft Windows mre¾e)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Ukoliko ¾elite biti u moguænosti ispisivati, molimo izaberite jedan od "
-#~ "ispisnih sustava izmeðu\n"
-#~ "CUPS i LPR-a.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS je novi, moæan i fleksibilan ispisni sustav za Unix sustave (CUPS\n"
-#~ "znaèi \"Common Unix Printing System\"). On je podrazumijevani ispisni "
-#~ "sustav u\n"
-#~ "Mandrake Linux-u.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR je stari ispisni sustav kori¹ten u prija¹njim Mandrake Linux "
-#~ "distribucijama.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko nemate pisaè, izaberite \"Niti jedan\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux mo¾e raditi sa mnogim tipovima pisaèa. Svaki od njih zahtjeva\n"
-#~ "razlièito postavljanje.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ako je va¹ pisaè fizièki povezan na va¹e raèunalo, izaberite \"Lokalni\n"
-#~ "pisaè\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko prisitupate pisaèu koji se nalazi na udaljenom Unix raèunalu, "
-#~ "izaberite\n"
-#~ "\"Udaljeni pisaè\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ako ¾elite pristupiti pisaèu koji se nalazi na udaljenom Microsoft "
-#~ "Windows raèunalu\n"
-#~ "(ili na Unix raèunalu koje koristi SMB protokol), izaberite \"SMB/Windows "
-#~ "95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Molimo ukljuèite va¹ pisaè prije nego nastaviti kako bi dopustili DrakX-u "
-#~ "da ga pronaðe.\n"
-#~ "\n"
-#~ "Trebate unijeti neke informacije ovdje.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Ime pisaèa: ispisni red koristi \"lp\" kao podrazumijevano ime "
-#~ "pisaèa. Zato, morate imati pisaè imenovan \"lp\".\n"
-#~ "     Ukoliko imate samo jedan pisaè, mo¾ete mu dati nekoliko imena. Samo "
-#~ "ih trebate odvojiti sa cijev\n"
-#~ "     karakterom (\"|\"). Zato, ako preferirate neko bolje ime, morate ga "
-#~ "staviti prije, primjer: \"Moj printer|lp\".\n"
-#~ "     Pisaè koji ima \"lp\" u svom imenu biti æe podrazumijevani pisaè.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Opis: Ovo je opcionalno, ali mo¾e biti korisno ukoliko imate "
-#~ "nekoliko pisaèa spojenih na va¹e raèunalo ili ako dozvoljavate\n"
-#~ "     drugim raèunalim da pristupe ovom pisaèu.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Lokacija: ako ¾elite staviti neke informacije o va¹em\n"
-#~ "     polo¾aju pisaèa, stavite ju ovdje (slobodni ste napisati ¹to\n"
-#~ "     ¾elite. naprimjer \"2 kat\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Trebate unijeti neke informacije ovdje.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Ime reda: ispisni red koristi \"lp\" kao podrazumijevano ime pisaèa. "
-#~ "Zato, trebate imati pisaè imenom \"lp\".\n"
-#~ "     Ako imate samo jedan pisaè, mo¾ete koristiti nekoliko imena za "
-#~ "njega. Samo ih trebate odvojiti cijev\n"
-#~ "     karakterom (\"|\"). Zato, ako preferirate da imate neko bolje ime, "
-#~ "morate ga staviti prije, primjer: \"Moj printer|lp\".\n"
-#~ "     Pisaè koji ima \"lp\" u svom imenu æe biti podrazumijevani pisaè.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Veza pisaèa: Ukoliko je va¹ pisaè fizièki spojen na va¹e raèunalo, "
-#~ "izaberite \"Lokalni pisaè\".\n"
-#~ "     Ukoliko ¾elite pristupiti pisaèu koji se nalazi na udaljenom Unix "
-#~ "raèunalu, izaberite \"Udaljeni lpd pisaè\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Ako ¾elite pristupiti pisaèu koji se nalazi na udaljenom Microsoft "
-#~ "Windows ralunalo (ili na Unix raèunalu koji koristi SMB\n"
-#~ "     protokol), izaberite \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Ukoliko ¾elite pristupiti pisaèu koji se nalazi na NetWare mre¾i, "
-#~ "izaberite \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Va¹ pisaè nije pronaðen. Molimo unesite ime ureðaja na\n"
-#~ "koji je spojen.\n"
-#~ "\n"
-#~ "\n"
-#~ "Za informaciju, veæina pisaèa je spojena na prvi paralelni port. On\n"
-#~ "se zove \"/dev/lp0\" pod GNU/Linux-om i \"LPT1\" pod Microsoft Windows-"
-#~ "ima."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Sada morate izabrati va¹ pisaè u gornjem popisu."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Molimo izaberite pravu opciju prema va¹em pisaèu.\n"
-#~ "Molimo pogledajte njegovu dokumentaciju ako neznate ¹to izabrati ovdje.\n"
-#~ "\n"
-#~ "\n"
-#~ "Moæi æete testirati va¹u konfiguraciju u slijedeæem koraku i moæi æete ju "
-#~ "promjeniti ako ne radi kako ¾elite."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Sada mo¾ete unijeti root lozinku za va¹ Mandrake Linux sustav.\n"
-#~ "Lozinka mora biti unijeta dva puta kako bi provjerili da su obje unijete "
-#~ "lozinke identiène.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root je sustavski administrator i jedini je korisnik kojemu je dozvoljeno "
-#~ "mjenjanje \n"
-#~ "sustavske konfiguracije. Dakle, izaberite lozinku pa¾ljivo. \n"
-#~ "Neautorizirano kori¹tenje root raèuna mo¾e biti jako opasno za "
-#~ "integritet\n"
-#~ "sustava, za njegove podatke i druge sustave koji su povezani s njim.\n"
-#~ "\n"
-#~ "\n"
-#~ "Lozinka bi trebala biti pomje¹ana od alfanumerièkih karaktera i mora "
-#~ "biti\n"
-#~ "najmanje 8 karaktera dugaèka. Nikada ne smije biti zapisana.\n"
-#~ "\n"
-#~ "\n"
-#~ "Nemojte postaviti lozinku previ¹e dugaèku ili kompliciranu, jer je se "
-#~ "morate moæi \n"
-#~ "sjetiti bez previ¹e napora."
-
-#~ msgid ""
-#~ "If your network uses LDAP (or NIS) protocol for authentication, select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "Ukoliko va¹a mre¾a koristi LDAP (ili NIS) protokol za autentifikaciju, "
-#~ "izaberite\n"
-#~ "\"LDAP\" (ili \"NIS\") kao autentifikaciju. Ukoliko ne znate, pitajte "
-#~ "va¹eg mre¾nog\n"
-#~ "administratora.\n"
-#~ "\n"
-#~ "Ukoliko va¹e raèunalo nije spojeno na nekakvu administriranu mre¾u, mo¾da "
-#~ "¾elite \n"
-#~ "izabrati \"Lokalne datoteke\" za autentifikaciju."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Sada mo¾ete napraviri jedan ili vi¹e \"regularnog\" korisnièkog raèuna, \n"
-#~ "suprotno od \"privilegiranog\" korisnièkog raèuna, root. Mo¾ete "
-#~ "napraviti\n"
-#~ "jedan ili vi¹e raèuna za svaku osobu kojoj ¾elite dozvoliti kori¹tenje\n"
-#~ "raèunala. Primjetite da æe svaki korisnièki raèuna imati svoje vlastite\n"
-#~ "postavke (grafièko okru¾je, postavke programa, itd.)\n"
-#~ "i svoj vlastiti \"kuæni direktorij\", u kojem su te postavke\n"
-#~ "pohranjene.\n"
-#~ "\n"
-#~ "\n"
-#~ "Prije svega, napravite raèun za sebe! Iako æete biti samo jedan korisnik\n"
-#~ "raèunala, ne smijete se prijavljivati kao root za dnevno kori¹tenje "
-#~ "sustava: to je\n"
-#~ "jako velik sigurnosni rizik. Napraviti sustav nekorisnim je obièno samo "
-#~ "tipku daleko.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dakle, trebali biste se prijaviti na sustav koristeæi korisnièki raèun\n"
-#~ "i kojega ste ovdje napravili, i prijaviti se kao root samo za "
-#~ "administriranje\n"
-#~ "i namjene odr¾avanja."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Pravljenje boot diskete je visoko preporuèeno. Ako ne mo¾ete\n"
-#~ "podiæi va¹e raèunalo, to je jedini naèin za spa¹avanje va¹eg sustava bez\n"
-#~ "ponovnog instaliranja."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO i grub glavne opcije su:\n"
-#~ "  - Boot ureðaj: postavlja se ime ureðaja (npr. hard disk\n"
-#~ "particija) koja sadr¾i boot sektor. Ukoliko neznate specifièno,\n"
-#~ "izaberite \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pauza prije podizanja podrazumijevane slike: Specifira broj destinke\n"
-#~ "sekunde koliko æe boot loader èekati prije podizanja prve slike.\n"
-#~ "Ovo je korisno na sustavima na kojima se odmah podi¾e sa hard diska "
-#~ "poslije\n"
-#~ "omoguæavanje tastature. Boot loader ne èeka ukoliko je \"pauza\" "
-#~ "izostavljena\n"
-#~ "ili postavljena na nulu.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mod: ovo specifira VGA tekst mod koji æe biti odabran\n"
-#~ "prilikom podizanja. Slijedeæe vrijednosti su raspolo¾ive: \n"
-#~ "\n"
-#~ "    * normalno: izabire normalan 80x25 tekst mod.\n"
-#~ "\n"
-#~ "    * <broj>:  koristi odgovarajuæi tekst mod.  - Obri¹i \"/tmp\" prvi "
-#~ "svakom podizanju: ukoliko ¾elite obrisati sve datoteke i direktorije\n"
-#~ "spremljene u \"/tmp\" kada podi¾ete va¹ sustav, izaberite ovu opciju.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precizan RAM ako je potrebno: na nesreæu, nema standardne metode za "
-#~ "pitati \n"
-#~ "BIOS o velièini RAM-a koji se nalazi u va¹em raèunalu. Kao posljedica, "
-#~ "Linux mo¾e\n"
-#~ "pogre¹no pronaæi ispravnu velièinu RAM-a. Ukoliko je to sluèaj, mo¾ete\n"
-#~ "specifirati ispravnu velièinu RAM-a ovdje.Molimo primjetite da je razlika "
-#~ "od 2 ili 4\n"
-#~ "MB izmeðu pronaðene memorije i memorije koja se nalazi u va¹em sustavu je "
-#~ "normalna."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO je bootloader za SPARC: on je u moguænosti podignuti\n"
-#~ "ili GNU/Linux ili bilo koji drugi postojeæi operativni sustav na va¹em "
-#~ "raèunalu.\n"
-#~ "Normalno, ti drugi operativni sustavi su ispravno detektirani i\n"
-#~ "instalirani. Ukoliko to nije sluèaj, mo¾ete dodati unos ruèno na ovom\n"
-#~ "zaslonu. Budite pa¾ljivi da izaberete ispravne parametre.\n"
-#~ "\n"
-#~ "\n"
-#~ "Takoðer æete mo¾da po¾eljeti nedati pristup tim drugim operativnim "
-#~ "sustavima\n"
-#~ "nikome, u tom sluèaju mo¾ete obrisati odgovarajuæe unose. Ali\n"
-#~ "u tom sluèaju, trebati æete boot disketu da bi ih podigli!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO glavne opcije su:\n"
-#~ "  - Bootloader instalacija: Oznaèava gdje ¾elite postaviti\n"
-#~ "zahtjevane informacije za podizanje GNU/Linux-a. Ukoliko ne znate toèno\n"
-#~ "¹to radite, izaberite \"Prvi sektor diska (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pauza prije bootiranja podrazumijevane slike: Specifira broj u "
-#~ "desetinkama\n"
-#~ "sekunde koliko æe boot loader èekati prije nego podigne prvu sliku.\n"
-#~ "Ovo je korisno na sustavima na kojima se sustav podi¾e odmah sa hard "
-#~ "diska poslije\n"
-#~ "omoguæivanja tastature. Boot loader ne èeka ukoliko je \"pauza\"\n"
-#~ "izostavljena ili postavljena na nulu."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Sada je vrijeme za konfiguriranje X Window Sustava, ¹to je\n"
-#~ "jezgra GNU/Linux GUI-a (Grafièkog Korisnièkog Suèelja). Za ovu namjenu,\n"
-#~ "morate konfigurirati va¹u video karticu i monitor. Veæina tih\n"
-#~ "koraka je automatizirano, dakle, va¹ rad se mo¾e sastojati\n"
-#~ "od samog provjeravanja ¹to je uraðeno i prihvaæanja postavki :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Kada je konfiguracija zavr¹ena, X-i æe biti pokrenuti (ako DrakX-u\n"
-#~ "niste rekli suprotno) tako da mo¾ete provjeriti i vidjeti da li\n"
-#~ "vam postavke odgovaraju. Ukoliko ne, mo¾ete doæi kasnije i\n"
-#~ "promjeniti ih, koliko god puta je potrebno."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Ukoliko je X pogre¹no pode¹en kori¹tenjem ovih opcija mo¾ete\n"
-#~ "ispravno podesiti X Window sustav."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Ukoliko preferirate grafièku prijavu odaberite \"Da\". U protivnom, "
-#~ "odaberite \"Ne\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Mo¾ete izabrati sigurnosnu razinu za va¹ sustav. Molimo pogledajte upute "
-#~ "za kompletnu\n"
-#~ "  informaciju. Jednostavno, ako ne znate ¹to izabrati, zadr¾ite "
-#~ "postavljenu opciju.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Va¹ sustav æe sada rebootirati.\n"
-#~ "\n"
-#~ "Nakon reboot-a va¹ novi Mandrake Linux sustav æe se automatski uèitati.\n"
-#~ "Ukoliko ¾elite bootirati neki drugi postojeæi operativni sustav molim "
-#~ "proèitajte\n"
-#~ "dodatne upute."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Èe¹ka (Programerska)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovaèka (Programerska)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Ime profila za napraviti:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Zapi¹i u /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "Vrati postavke iz datoteke"
-
-#~ msgid "Save in file"
-#~ msgstr "Spremi u datoteku"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Vrati postavke sa diskete"
-
-#~ msgid "Format all"
-#~ msgstr "Formatiraj sve"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Poslije formatiranja svih particija,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "svi podaci na ovim particijama biti æe izgubljeni"
-
-#~ msgid "Reload"
-#~ msgstr "Ponovo uèitaj"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Da li ¾elite generirati auto instalacijsku disketu za replikaciju linux-a?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL postavke"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Sa udaljenim CUPS poslu¾iteljem, ne morate konfigurirati\n"
-#~ "nijedan pisaè ovdje; pisaèi æe biti automatski detektirani\n"
-#~ "ukoliko nemate poslu¾itelj na drugoj mre¾i; u tom sluèaju,\n"
-#~ "morate dati IP adresu CUPS poslu¾itelja i opciono broj porta."
-
-#~ msgid "Remote queue"
-#~ msgstr "Udaljeni red"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Udaljeni red"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Ime domene"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Nema pisaèa"
-
-#, fuzzy
-#~ msgid "start it"
-#~ msgstr "ogranièi"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Praæenje mre¾e"
-
-#~ msgid "Profile "
-#~ msgstr "Profil "
-
-#~ msgid "Statistics"
-#~ msgstr "Statistike"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Brzina Slanja: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Brzina Primanja: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Tip veze: "
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Spajam se na Internet "
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Prekidam vezu na Internet "
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Prekidanje veze prema Internetu neuspje¹no."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Prekidanje veze prema Internetu zavr¹eno."
-
-#~ msgid "Connection complete."
-#~ msgstr "Veza uspostavljena."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Veza neuspje¹no uspostavljena.\n"
-#~ "Provjerite va¹e postavke u Mandrake kontrolnom centru."
-
-#, fuzzy
-#~ msgid "Color configuration"
-#~ msgstr "Postavke"
-
-#~ msgid "sent: "
-#~ msgstr "poslano: "
-
-#~ msgid "received: "
-#~ msgstr "primljeno: "
-
-#, fuzzy
-#~ msgid "average"
-#~ msgstr "smeæe"
-
-#~ msgid "Connect"
-#~ msgstr "Pove¾i"
-
-#~ msgid "Disconnect"
-#~ msgstr "Odspoji"
-
-#~ msgid "/File/_New"
-#~ msgstr "/Datoteka/_Nova"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>N"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/Datoteka/_Otvori"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>O"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/Datoteka/_Spremi"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/Datoteka/Spremi K_ao"
-
-#~ msgid "/File/-"
-#~ msgstr "/Datoteka/-"
-
-#~ msgid "/_Options"
-#~ msgstr "/_Opcije"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/Opcije/Test"
-
-#~ msgid "/_Help"
-#~ msgstr "/_Pomoæ"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/_Pomoæ/_O programu..."
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Uobièajena razina pokretanja"
-
-#~ msgid "Europe"
-#~ msgstr "Europa"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "Ukloni red"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Sadr¾aj konfiguracijske datoteke ne mo¾e biti interpretiran."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Neprepoznata konfiguracijska datoteka"
-
-#~ msgid "Adapter"
-#~ msgstr "Adapter"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "Onemoguæi"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Omoguæi"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Sada mo¾ete istestirati va¹eg mi¹a. Koristite tipke i kotaèiæ kako bi\n"
-#~ "provjerili da li su postavke dobre. Ukoliko nisu, kliknite na \"Odustani"
-#~ "\"\n"
-#~ "za odabir nekih drugih upravljaèkih programa."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (ili ADSL) veza"
-
-#~ msgid "Choose"
-#~ msgstr "Izaberite"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Mo¾ete specifirati direktno URI za pristup pisaèu sa CUPS-om."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Da, ispi¹i ASCII probnu stranicu"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Da, ispi¹i PostScript probnu stranicu"
-
-#~ msgid "Paper Size"
-#~ msgstr "Velièina papira"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Izbaci stranu poslije posla?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Postavke uniprinter pokretaèkog programa"
-
-#~ msgid "Color depth options"
-#~ msgstr "Opcije dubine boje"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Ispi¹i tekst kao PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Popravi stepenasti tekst?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Broj stranica po izlaznim stranicama"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Desna/lijeva margina u toèkama (1/72 inèa)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Gornja/donja margina u toèkama (1/72 inèa)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Dodatne GhostScript opcije"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Dodatne Tekst opcije"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Obrni redoslijed stranica"
-
-#~ msgid "CUPS starting"
-#~ msgstr "CUPS pokretanje"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Odaberite vezu udaljenog pisaèa"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Svaki pisaè treba ime (naprimjer lp).\n"
-#~ "Drugi parametri kao opis pisaèa ili njegova lokacija\n"
-#~ "mo¾e biti definirana. Koje ime æe biti kori¹teno za ovaj pisaè i\n"
-#~ "kako je pisaè povezan?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Svaki ispisni red (gdje se ¹alju poslovi ispisa) treba\n"
-#~ "ime (èesto lp) i posrednièki direktorij vezan uz njega. Koje\n"
-#~ "ime i direktorij æe se koristiti za ovaj red i kako je pisaè povezan?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Ime reda"
-
-#~ msgid "Spool directory"
-#~ msgstr "Posrednièki direktorij"
-
-#~ msgid "Light configuration"
-#~ msgstr "Laka konfiguracija"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Pru¾ateljev DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Pru¾ateljev DNS 2"
-
-#, fuzzy
-#~ msgid "fsck failed: "
-#~ msgstr "montiranje nije uspjelo:"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Ako ¾elite dodatnu sigurnost na sustavu odaberite \"Koristi shadow "
-#~ "datoteku\" i\n"
-#~ "\"Koristi MD5 lozinke\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Ukoliko va¹a mre¾a koristi NIS odaberite \"Koristi NIS\". Ako niste "
-#~ "sigurni\n"
-#~ "raspitajte se kod svog mre¾nog administratora."
-
-#~ msgid "yellow pages"
-#~ msgstr "¾ute stranice"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Kako se ¾elite spojiti na Internet?"
-
-#~ msgid "cannot fork: "
-#~ msgstr "ne mogu napraviti fork: "
-
-#~ msgid "Configure..."
-#~ msgstr "Pode¹avanje..."
-
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Postavke Lilo-a/Grub-a"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Odabrana velièina %d%s"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Ova startup skripta poku¹ava uèitati module za va¹ usb mi¹."
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Otvaram va¹u vezu..."
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Postava stila podizanja"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Sada kada je va¹a Internet veza konfigurirana,\n"
-#~ "va¹e raèunalo mo¾e biti konfigurirano da dijeli vlastitu Internet vezu s "
-#~ "drugim raèunalima.\n"
-#~ "Pa¾nja: trebate imati primjenjiv mre¾ni adapter za postavljanje lokalne "
-#~ "mre¾e (LAN).\n"
-#~ "\n"
-#~ "®elite li postaviti dijeljenje internet veze?\n"
-
-#~ msgid "Welcome to the Internet Connection Sharing utility!"
-#~ msgstr "Dobro do¹li u alat za Dijeljenje Internet Veze"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Automatski odabir ovisnosti"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Podesi LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Napravi boot disketu"
-
-#~ msgid "Format floppy"
-#~ msgstr "Formatiraj disketu"
-
-#~ msgid "Choice"
-#~ msgstr "Izbor"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "horizontalna lijepog izgleda aurora"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "vertikalna tradicionalna aurora"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Sada mo¾ete izabrati neke razne opcije za va¹ sustav.\n"
-#~ "\n"
-#~ "* Koristi hard disk optimizacije: ova opcija mo¾e pobolj¹ati hard disk "
-#~ "performanse, ali samo za napredne korisnike. Neki chipseti\n"
-#~ "  s gre¹kom mogu uni¹titi va¹e podatke, zato pazite. Upamtite da kernel "
-#~ "ima ugraðeni crni popis pogona i chipseta, ali ako\n"
-#~ "  ¾elite izbjeæi lo¹a iznenaðenja, ostavite ovu opciju nepostavljenu.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Izabir sigurnosne razine: mo¾ete izabrati sigurnosnu razinu za va¹ "
-#~ "sustav. Molimo pogledajte upute za kompletnu\n"
-#~ "  informaciju. Jednostavno, ako ne znate ¹to izabrati, zadr¾ite veæ "
-#~ "postavljenu opciju.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precizan RAM ako je potrebno: na nesreæu, nema standardne metode za "
-#~ "pitanje BIOS-a oko velièine RAM-a koji se nalazi u\n"
-#~ "  va¹em raèunalu. Kao posljedica, Linux mo¾e neuspjelo detektirati "
-#~ "velièinu va¹eg RAM-a ispravno. Ukoliko je to sluèaj, mo¾ete\n"
-#~ "  specifirati toènu velièinu RAM-a ovdje. Molimo primjetite da je razlika "
-#~ "od 2 ili 4 MB izmeðu pronaðene memroije i stvarne\n"
-#~ "  memorije u va¹em sustavu normalna.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Montiranje prenosivih medija: ukoliko preferirate da ruèno ne montirate "
-#~ "prijenosne medije (CD-Rom, floppy, Zip, itd.) \n"
-#~ "  tipkajuæi \"mount\" ili \"umount\", izaberite ovu opciju.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Oèisti \"/tmp\" prvi svakom podizanju: ukoliko ¾elite obrisati sve "
-#~ "datoteke i direktorije sadr¾ane u \"/tmp\" kada podi¾ete va¹ sustav,\n"
-#~ "  izaberite ovu opciju.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Omoguæi num lock pri podizanju: ako ¾elite ukljuèiti va¹ NumLock "
-#~ "poslije podizanja, izaberite ovu opciju. Molimo primjetite da \n"
-#~ "  ne biste trebali omoguæiti ovu opciju na laptopima jer NumLock mo¾e ili "
-#~ "ne mora raditi pod X-ima."
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "®alim, postavljanje mail-a jo¹ nije implementirano. Budite strpljivi."
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "Dobro do¹li u Èarobnjak za mre¾nu konfiguraciju.\n"
-#~ "Koje komponente ¾elite konfigurirati?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Internet/Mre¾ni pristup"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Razna pitanja"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Ne mo¾ete koristiti supermount u najvi¹em sigurnosnom nivou"
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Budite oprezni, imajuæi numlock omoguæen uzrokuje mnogo tipaka da\n"
-#~ "daje brojeve umjesto normalnih slova (eg: pritiskajuæi `p' daje `6')"
-
-#~ msgid "using module"
-#~ msgstr "koristeæi modul"
-
-#~ msgid "not connected"
-#~ msgstr "nije povezan"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "Upozorenje:\n"
-#~ "Primjenjivanjem promjena dok je pokrenuto mo¾e sru¹iti va¹e X okru¾je."
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "Ukoliko ¾elite nastaviti, ugasiti æu va¹e %s okru¾je"
-
-#~ msgid "Development, Database"
-#~ msgstr "Razvoj, Baze"
-
-# ../../share/compssUsers
-#~ msgid "Scientific applications"
-#~ msgstr "Znanstvene aplikacije"
-
-# ../../share/compssUsers
-#~ msgid "Server, DNS/DHCP "
-#~ msgstr "Poslu¾itelj, DNS/DHCP"
-
-#~ msgid "toot"
-#~ msgstr "trubiti"
-
-# ../../share/compssUsers
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Razvoj, Integrirana Okru¾ja"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Razvoj, Standardni alati"
-
-# ../../share/compssUsers
-#~ msgid "Server, File/Print/Samba"
-#~ msgstr "Poslu¾itelj, Datoteèni/Ispisni/Samba"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Koji bootloader(e) ¾elite koristiti?"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Da poku¹am pronaæi modem?"
-
-#~ msgid "Multimedia"
-#~ msgstr "Multimedija"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Podesi vremensku zonu"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Razno"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(mo¾e uzrokovati o¹teæenje podataka)"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "Koristi optimizacije hard diska?"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Ukljuèi NumLock kod pokretanja"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Potvrda lozinke"
-
-#~ msgid "DNS server:"
-#~ msgstr "DNS poslu¾itelj:"
-
-#~ msgid "Gateway device:"
-#~ msgstr "Gateway ureðaj:"
-
-#~ msgid "default"
-#~ msgstr "uobièajeno"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Koristi diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "Prilagoðeno"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Koristi shadow datoteku"
-
-#~ msgid "shadow"
-#~ msgstr "shadow"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Koristi MD5 lozinke"
-
-#~ msgid "Search"
-#~ msgstr "Tra¾i"
-
-#~ msgid "Package"
-#~ msgstr "Paket"
-
-#~ msgid "Text"
-#~ msgstr "Tekst"
-
-#~ msgid "Tree"
-#~ msgstr "Stablo"
-
-#~ msgid "Sort by"
-#~ msgstr "Sortiraj"
-
-#~ msgid "Category"
-#~ msgstr "Kategorija"
-
-#~ msgid "Installed packages"
-#~ msgstr "Instalirani paketi"
-
-#~ msgid "Available packages"
-#~ msgstr "Dostupni paketi"
-
-#~ msgid "Expand all"
-#~ msgstr "Pro¹iri sve"
-
-#~ msgid "Collapse all"
-#~ msgstr "Sa¾mi sve"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Dodaj lokaciju paketa"
-
-#~ msgid "Update location"
-#~ msgstr "Osvje¾i lokaciju"
-
-#~ msgid "Find Package"
-#~ msgstr "Pronaði paket"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Pronaði paket koji sadr¾i datoteku"
-
-#~ msgid "Choose package to install"
-#~ msgstr "Odaberite pakete za instaliranje"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Provjeravam ovisnosti"
-
-#~ msgid "Wait"
-#~ msgstr "Prièekaj"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Slijedeæi paketi æe biti deinstalirani"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "Deinstalacija RPMova u toku"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Koje pakete tra¾ite"
-
-#~ msgid "%s not found"
-#~ msgstr "%s nije naðen"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Koje datoteke tra¾ite?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "©to tra¾ite?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Pridjelite ime (npr. `dodatno', `komercijalno')"
-
-#~ msgid "Directory"
-#~ msgstr "Direktorij"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "cdrom nije dostupan (nema nièega u /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL direktorija koji sadr¾i RPMove"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s se veæ koristi"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Uklanjam zapis %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Tra¾im listove"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Prona¹ao sam ISDN karticu:\n"
-
-#~ msgid "France"
-#~ msgstr "Francuska"
-
-#~ msgid "Other countries"
-#~ msgstr "Ostale zemlje"
-
-#~ msgid "mandatory"
-#~ msgstr "obvezno"
-
-#~ msgid "interesting"
-#~ msgstr "interesantno"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (va¾no)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (vrlo lijepo)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (lijepo)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Na koji serijski port je mi¹ prikljuèen?"
-
-#~ msgid "Czech"
-#~ msgstr "Èe¹ka"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovaèka"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "Ne mogu instalirati ipchains RPM s urpmi-em."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "Ne mogu instalirati dhcp RPM s urpmi-em."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "Ne mogu instalirati linuxconf RPM s urpmi-em."
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "Ne mogu instalirati bind RPM s urpmi-em."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "Ne mogu instalirati caching-nameserver RPM s urpmi-em"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Njemaèka (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "©to ¾elite napraviti?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Odaberite \"Instaliraj\" ukoliko nemate Linux instaliran ili ako\n"
-#~ "¾elite imati vi¹e razlièitih distribucija ili inaèica Linux na sustavu.\n"
-#~ "\n"
-#~ "Odaberite \"Dogradnja\" ako ¾elite nadograditi postojeæu inaèicu Mandrake "
-#~ "Linuxa:\n"
-#~ "%s ili %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Odaberite:\n"
-#~ "\n"
-#~ "  - Automatski: Ukoliko nikada niste instalirali Linux.\n"
-#~ "\n"
-#~ "  - Prilagoðeno: Ukoliko ste upoznati sa Linuxom  kori¹tenjem ove\n"
-#~ "opcije moæi æe te odabrati kakvu instalaciju ¾elite npr. normalna, "
-#~ "programer\n"
-#~ "ili poslu¾itelj. Odaberite \"Normalna\" za sustav opæe namjene.\n"
-#~ "Odaberite \"Programer\" ako ¾elite koristiti raèunalo primarno za razvoj\n"
-#~ "softvera ili odaberite \"Poslu¾itelj\" ako ¾elite koristiti raèunalo kao\n"
-#~ "poslu¾itelj npr. za mail, web, fileserver, ispis itd.\n"
-#~ "\n"
-#~ "  - Struènjak: Ukoliko ste vrlo dobro upoznati sa Linuxom i ¾elite\n"
-#~ "imati potpunu kontrolu nad instalacijom Linuxa odaberite opciju\n"
-#~ "\"Struènjak\".\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Sve novo definirane particije moraju biti formatirane za\n"
-#~ "uporabu tj. moraju imati ispravni datoteèni sustav. Takoðer ukoliko\n"
-#~ "¾elite obrisati podatke s odreðene particije odaberite reformatiranje.\n"
-#~ "Opaska: nije potrebno reformatirati postojeæe particije osobito\n"
-#~ "ako sadr¾e datoteke ili podatke koje ¾elite saèuvati.\n"
-#~ "Na primjer obièno /home i /usr/local sadr¾e podatke koje treba saèuvati."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Poèela je instalacija paketa koje ste odabrali. Ova\n"
-#~ "operacija æe potrajati par minuta osim ako ste odabrali\n"
-#~ "nadogradnju postojeæeg sustava. U tom sluèaju instalacija\n"
-#~ "æe izvr¹iti odreðene provjere prije same nadogradnje."
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Odbaci promjene?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Koja je vrsta va¹eg mi¹a?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Automatski odabir rezolucije"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Kako bih prona¹ao dostupne rezolucije moram poku¹ati par razlièitih.\n"
-#~ "Monitor æe tokom pretrage treptati...\n"
-#~ "Ukoliko ¾elite slobodno iskljuèite monitor. Nakon ¹to je sve gotovo èuti "
-#~ "æe te pip."
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Mogu poku¹ati pronaæi dostupnu rezoluciju (npr. 800x600).\n"
-#~ "Meðutim ponekad takva pretraga mo¾e zamrznuti raèunalo.\n"
-#~ "Da li ste sigurni da ¾elite nastaviti?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Niti jedan valjan mode nije naðen\n"
-#~ "Probajte sa drugom grafièkom karticom ili monitorom"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Automatski tra¾i rezoluciju"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB mi¹"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB mi¹ (2 gumba)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB mi¹ (3 gumba i vi¹e)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB mi¹"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB mi¹ (2 gumba)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB mi¹ (3 gumba i vi¹e)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Bus mi¹"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft Bus mi¹"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech Bus mi¹"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB mi¹ (3 gumba i vi¹e)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A ili vi¹e (serijski)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (serijski)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (serijski)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (serijski)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Generièki Mi¹ (serijski)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft compatible (serial)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Generic 3 Button Mouse (serial)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (serijski)"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "nfs montiranje nije uspjelo"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Kriptografski"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Da li ¾elite podesiti mre¾ne postavke sustava?"
-
-#~ msgid "Show less"
-#~ msgstr "Prika¾i manje"
-
-#~ msgid "Show more"
-#~ msgstr "Prika¾i vi¹e"
-
-#~ msgid "Take over the hard drive"
-#~ msgstr "Preuzmi cijeli hard disk"
-
-#~ msgid "tie"
-#~ msgstr "tie"
-
-#~ msgid "brunette"
-#~ msgstr "crnka"
-
-#~ msgid "girl"
-#~ msgstr "djevojka"
-
-#~ msgid "woman-blond"
-#~ msgstr "plavu¹a"
-
-#~ msgid "automagic"
-#~ msgstr "automagijski"
-
-#~ msgid "Have you been provided with a hostname?"
-#~ msgstr "Da li imate ime raèunala ?"
-
-#~ msgid "Network:"
-#~ msgstr "Network:"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Koji raspored tipkovnice imate?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Da li da tra¾im PCMCIA kartice?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Da li tra¾im %s ureðaje?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Da li tra¾im PCI ureðaje?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "Tra¾im root particiju."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: Ovo nije root particija, molim odaberite drugu."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr ""
-#~ "Izaberite particiju koju ¾elite koristiti kao korijensku particiju (/)."
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "Nemate niti jednu Windows particiju!"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Nemate dovoljno mjesta za Lnx4win"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Dobrodosli u LILO izbornik operativnih sustava!\n"
-#~ "\n"
-#~ "Za popis dostupnih sustava pritisnite <TAB>.\n"
-#~ "\n"
-#~ "Ako zelite ucitati neki od operativnih sustava upisite njegovo ime\n"
-#~ "i pritisnite <ENTER> oili pricekajte %d sekundi za podrazumijevani\n"
-#~ "operativni sustav.\n"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Dobrodosli u SILO izbornik operativnih sustava!\n"
-#~ "\n"
-#~ "Za popis dostupnih sustava pritisnite <TAB>.\n"
-#~ "\n"
-#~ "Ako zelite ucitati neki od operativnih sustava upisite njegovo ime\n"
-#~ "i pritisnite <ENTER> oili pricekajte %d sekundi za podrazumijevani\n"
-#~ "operativni sustav.\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "SILO glavne postavke"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Ovo su trenutni zapisi u SILO-u.\n"
-#~ "Mo¾ete dodati jo¹ koji ili urediti postojeæi."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Ova oznaka veæ postoji"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "Instalacija SILO-a nije uspjela. Prijavljena je slijedeæa gre¹ska:"
-
-#~ msgid "Shutting down"
-#~ msgstr "Ga¹enje sustava"
-
-#~ msgid "useless"
-#~ msgstr "beskorisno"
diff --git a/perl-install/share/po/hu.po b/perl-install/share/po/hu.po
deleted file mode 100644
index 3c4efa421..000000000
--- a/perl-install/share/po/hu.po
+++ /dev/null
@@ -1,9418 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 2000 Mandrakesoft
-# KOVACS Emese Alexandra <emese@itp.hu>, 2000, 2001
-# Kultsar Kadosa Atilla <kadi@kadi.emg.hu>, 2000
-# Takacs Sandor <taki@dfmk.hu>, 2000
-# Timar Andras <atimar@itp.hu>, 2000
-# Sari Gabor <saga@tux.hu>, 2000
-# Tamas Szanto <tszanto@mol.hu>, 2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-09-22 22:18+0100\n"
-"Last-Translator: Arpad Biro <biro_arpad@yahoo.com>\n"
-"Language-Team: Hungarian\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "A képernyõk egymástól független beállítása"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "A Xinerama kiterjesztés használata"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Csak a(z) \"%s\" (%s) kártya beállítása"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "A többképernyõs mód beállítása"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"A grafikus kártya lehetõvé teszi több képernyõ használatát.\n"
-"Mit szeretne tenni?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Grafikus kártya"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Válasszon egy grafikus kártyát"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Válasszon egy X-kiszolgálót"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X-kiszolgáló"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Melyik XFree-t szeretné használni?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A kártya támogat hardveres 3D-s gyorsítást, de csak az XFree %s verzióban.\n"
-"Az XFree %s is használható; elképzelhetõ, hogy abban jobb a 2D-s támogatás."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "A kártya támogat hardveres 3D-s gyorsítást az XFree %s verzióval."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s hardveres 3D-s gyorsítással"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"A kártya támogat hardveres 3D-s gyorsítást az XFree %s verzióban,\n"
-"DE EZ KÍSÉRLETI JELLEGÛ, HASZNÁLATA AKÁR A GÉP LEFAGYÁSÁHOZ IS VEZETHET!"
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s KÍSÉRLETI JELLEGÛ hardveres 3D-s gyorsítással"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A kártya támogat hardveres 3D-s gyorsítást, de csak az XFree %s verzióban.\n"
-"EZ KÍSÉRLETI JELLEGÛ; HASZNÁLATA AKÁR A GÉP LEFAGYÁSÁHOZ IS VEZETHET.\n"
-"Az XFree %s verzió is használható; elképzelhetõ, hogy ebben jobb a 2D-s\n"
-"támogatás."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (telepítési meghajtóprogram)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree-beállítások"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Válassza ki a grafikus kártyán található memória mennyiségét"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Az X beállításai"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "A monitor kiválasztása"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"A két legfontosabb paraméter a függõleges frissítés frekvenciája (a teljes\n"
-"képernyõ frissítési gyorsasága) és a vízszintes frissítés frekvenciája (a\n"
-"vízszintes sorok megjelenítésének gyorsasága).\n"
-"\n"
-"NAGYON FONTOS, hogy egyik se lépje túl a monitorhoz engedélyezett\n"
-"felsõ határértéket, mert ilyenkor esetleg a monitor megsérülhet.\n"
-"Ha nem ismeri a monitor jellemzõit, válasszon egy biztonságosan\n"
-"alacsony értéket!"
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Vízszintes frissítés"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Függõleges frissítés"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "A monitor nincs beállítva"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "A grafikus kártya még nincs beállítva"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "A felbontások még nincsenek beállítva"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Ki szeretné próbálni a beállításokat?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Vigyázat! A grafikus kártya kipróbálása esetleg a gép lefagyásához is "
-"vezethet!"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "A beállítások kipróbálása"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"változtasson meg néhány paramétert"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Hiba történt:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Kilépés %d másodperc múlva"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Megfelelõ ez a beállítás?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Hiba történt, változtasson meg néhány paramétert"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Felbontás"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Válassza ki a felbontásokat és a színmélységet"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafikus kártya: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Szakértõi mód"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Mindent mutasson"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Felbontások"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Billentyûzetkiosztás: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Az egér típusa: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Az egeret kezelõ eszköz: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "A vízsz. frissítési frekvencia: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "A függ. frissítési frekvencia: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "A grafikus kártya: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "A grafikus kártya azonosítója: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "A kártya memóriája: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Színmélység: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Felbontás: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86-meghajtó: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Az X beállításának elõkészítése"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Mit szeretne tenni?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "A monitor módosítása"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "A grafikus kártya módosítása"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Az X beállításainak módosítása"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "A felbontás módosítása"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Az adatok megjelenítése"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Még egy próba"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Kilépés"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Meg szeretné tartani a módosításokat?\n"
-"A jelenlegi beállítás:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
-"A módosítások csak a(z) %s programba való következõ bejelentkezéskor lépnek "
-"érvénybe"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"Jelentkezzen ki, majd nyomja meg a Ctrl+Alt+BackSpace billentyûkombinációt"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "Grafikus módú bejelentkezés"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Beállítható, hogy rendszerindításkor az X automatikusan elinduljon.\n"
-"Szeretne grafikus módú bejelentkezést?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 szín (8-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ezer szín (15-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ezer szín (16-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 millió szín (24-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milliárd szín (32-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB vagy több"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480, 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600, 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-kompatibilis, 1024x768, 87 Hz, váltottsoros (nincs 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768, 87 Hz, váltottsoros, 800x600 56 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600, 60 Hz, 640x480 72 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Nem váltottsoros SVGA, 1024x768, 60 Hz, 800x600 72 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Magas frekvenciájú SVGA, 1024x768, 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multisync monitor, amely képes 1280x1024-re 60 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multisync monitor, amely képes 1280x1024-re 74 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multisync monitor, amely képes 1280x1024-re 76 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Olyan monitor, amely képes 1600x1200-ra 70 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Olyan monitor, amely képes 1600x1200-ra 76 Hz-en"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "A rendszerindítási partíció elsõ szektora"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "A lemezmeghajtó legelsõ szektora (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "A SILO telepítése"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Hová kerüljön a rendszerindító program (bootloader)?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "A LILO/GRUB telepítése"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO, szöveges menüvel"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO, grafikus menüvel"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "GRUB"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Indítás DOS-ból vagy Windows-ból (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Rendszerindítási beállítások"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "A használni kívánt rendszerbetöltõ"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "A rendszerindító program telepítése"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Rendszerindítási eszköz"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nem mûködik régi BIOS-okkal)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "kompakt"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Képernyõmód"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Várakozási idõ az alapértelmezett rendszer betöltése elõtt"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Jelszó"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Jelszó (még egyszer)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "A parancssorban átadható paraméterek korlátozása"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "korlátozás"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "A /tmp törlése minden újraindulásnál"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "A RAM mérete, ha szükséges (%d MB-ot detektáltam)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Több profil engedélyezése"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "A fizikai memória mérete MB-ban"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"\"A parancssorban átadható paraméterek korlátozása\" beállításnak jelszó "
-"nélkül nincs értelme"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Próbálja meg újra"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "A jelszavak nem egyeznek"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Indítási üzenet"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Késleltetés Open Firmware-nél"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Várakozási idõ rendszerindításkor"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "CD-rõl történhet rendszerindítás?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "OF-rõl történhet rendszerindítás?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Az alapértelmezett op. rendszer?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Itt láthatók a jelenlegi bejegyzések.\n"
-"Új bejegyzések vehetõk fel, illetve módosíthatók a meglevõk."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Hozzáadás"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Kész"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Módosítás"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Milyen bejegyzést szeretne felvenni?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Egyéb op. rendszer (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Egyéb op. rendszer (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Egyéb op. rendszer (Windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Indítófájl"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Gyökér"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Hozzáfûzés"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Kezdeti RAM-diszk"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Írható-olvasható"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tábla"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Nem biztonságos"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Címke"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Alapértelmezés"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "A RAM-diszk mérete"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Bejegyzés eltávolítása"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "A címke nem lehet üres"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Már van ilyen nevû címke"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s csatolót találtam"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Van még másik is?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Van valamilyen %s csatoló?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Nem"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Igen"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "A hardverjellemzõk megjelenítése"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Meghajtóprogram telepítése ehhez a(z) %s-kártyához: %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(%s modul)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Melyik %s-meghajtóprogramot próbáljam meg?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Bizonyos esetekben a(z) %s meghajtóprogramnak további paraméterekre van\n"
-"szüksége a helyes mûködéshez. Szeretne további paramétereket megadni a\n"
-"meghajtóprogramnak, vagy hagyja, hogy az lekérdezze a szükséges\n"
-"információkat? Bizonyos körülmények esetén az automatikus detektálás\n"
-"a gép lefagyásához vezethet, de komolyabb kárt nem okozhat."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Automatikus detektálás"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Paraméterek megadása"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Adja meg a(z) %s modul paramétereit."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Itt lehet megadni a(z) %s modul paramétereit\n"
-"a következõ formátumban: \"név1=érték1 név2=érték2 ...\".\n"
-"Például: \"io=0x300 irq=7\""
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "A modul paraméterei:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"A(z) %s modul betöltése nem sikerült.\n"
-"Megpróbálja a betöltést más paraméterekkel?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(már fel van véve: %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Ez a jelszó túl egyszerû"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Adjon meg egy felhasználónevet"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"A felhasználónév csak a következõket tartalmazhatja: kisbetûk, számok, \"-\" "
-"és \"_\""
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Már létezik ilyen felhasználónév"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Felhasználó hozzáadása"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Adjon meg egy felhasználónevet\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Név elfogadása"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Valódi név"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Felhasználónév"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Parancsértelmezõ"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Ikon"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Automatikus bejelentkezés"
-
-#: ../../any.pm_.c:757
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Beállítható, hogy indításkor egy felhasználó automatikusan bejelentkezzen.\n"
-"Szeretné használni ezt a lehetõséget?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Adja meg az alapértelmezett felhasználónevet:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Válassza ki a használni kívánt ablakkezelõt:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Válasszon nyelvet."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "Választhat más nyelveket is, ezek a telepítés után lesznek elérhetõk."
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Mind"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Udvozoljuk a(z) %s rendszerinditoban!\n"
-"\n"
-"Valasszon egy operacios rendszert a listabol, vagy varjon\n"
-"%d masodpercig, amig az alapertelmezett elindul.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Udvozoljuk a GRUB rendszerindito programban!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "A(z) %c es a(z) %c billentyukkel lehet a bejegyzesek kozott lepegetni."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Nyomja meg az Enter billentyut a kijelolt rendszer inditasahoz, az 'e'-t "
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "az inditasi parancsok modositasahoz, vagy a 'c'-t a parancssorhoz."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "A kijelolt operacios rendszer %d masodperc mulva elindul."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "nincs elég hely a /boot partíción"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Asztal"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Start menü"
-
-#: ../../bootloader.pm_.c:972
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "A rendszerindító program nem tehetõ %s partícióra\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "még nem használható a segítség\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "A rendszerindítás beállításai"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Fájl"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Fájl/Ki_lépés"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Új stílusú kategorizáló monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Új stílusú monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Hagyományos monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Hagyományos GTK+-monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Az Aurora indítása rendszerindításkor"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "LILO/GRUB mód"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Jelenleg a(z) %s rendszerindító programot használja.\n"
-"Kattintson a Beállítás gombra a beállításvarázsló elindításához."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Beállítás"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Rendszerindítási mód"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Rendszer-mód"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Az X induljon el rendszerindításkor"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Ne legyen automatikus bejelentkezés"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Legyen automatikus bejelentkezés (felhasználónév, grafikus környezet)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Mégsem"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Az /etc/inittab fájlt nem sikerült olvasásra megnyitni: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "A LILO telepítése nem sikerült a következõ hiba miatt:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d perc"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 perc"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d másodperc"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Elõször készítsen biztonsági mentést az adatokról"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Olvassa el figyelmesen!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ha az aboot-ot fogja használni, elõször ellenõrizze, hogy maradt-e elég\n"
-"hely (legalább 2048 szektor) a lemez elején"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Hiba"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Varázsló"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Új"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "Távoli"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Csatlakoztatási pont"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Beállítások"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Típus"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Leválasztás"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Csatlakoztatás"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Válasszon"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Egy nagy FAT partíció van\n"
-"(ez gyakran egy Microsoft DOS/Windows partíció).\n"
-"Célszerû elõször átméretezni a partíciót\n"
-"(kattintson a partícióra, majd az \"Átméretezés\" gombra)."
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Kattintson egy partícióra"
-
-#: ../../diskdrake.pm_.c:240
-msgid "Please click on a media"
-msgstr "Kattintson egy médiára"
-
-#: ../../diskdrake.pm_.c:243
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr ""
-"Kattintson egy gombra fentebb\n"
-"\n"
-"Vagy használja az \"Új\" funkciót"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr "Használja az \"Új\" funkciót"
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Részletek"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Journalised FS"
-msgstr "Naplózott fájlrendszer"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Lapozóterület (swap)"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Üres"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Egyéb"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Fájlrendszer-típusok:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Létrehozás"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Használja inkább ezt: \"%s\""
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Törlés"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Használja elõször a \"Leválasztás\"-t"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"A(z) %s partíció típusának módosítása után a partíción levõ adatok elvesznek"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Hová szeretné csatlakoztatni a(z) %s eszközt?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "Csatlakoztatási (mount) opciók"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "Vegyes"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "Cserélhetõ lemez"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "A típus megváltoztatása"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Melyik fájlrendszert szeretné?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "Az elérhetõ NFS-megosztások felismerése"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "Az elérhetõ NFS-megosztások felismerése a(z) %s kiszolgálón"
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr "Ha a fenti lista nem tartalmazza a kívánt elemet, adja meg itt:"
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Kiszolgáló"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "Megosztás"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "Az elérhetõ Samba-megosztások felismerése"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "A(z) %s kiszolgálón elérhetõ Samba-megosztások felismerése"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "Válasszon egy partíciót"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Válasszon egy másik partíciót"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Kilépés"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Átváltás szakértõi módba"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Átváltás normál módba"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Visszavonás"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Folytassam a mûveletet?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Kilépés mentés nélkül"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Ki akar lépni a programból a partíciós tábla mentése nélkül?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "El szeretné menteni az /etc/fstab fájlban végrehajtott módosításokat?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Automatikus helyfoglalás"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Teljes törlés"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Egyéb"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "Merevlemez-jellemzõk"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Nincs elég szabad terület az automatikus helyfoglaláshoz"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Mindegyik elsõdleges partíció foglalt"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Nem hozható létre több partíció"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"További partíciók létrehozásához törölni kell egyet (hogy egy kiterjesztett "
-"partíciót létre lehessen hozni)"
-
-#: ../../diskdrake_interactive.pm_.c:285
-msgid "Save partition table"
-msgstr "A partíciós tábla mentése"
-
-#: ../../diskdrake_interactive.pm_.c:286
-msgid "Restore partition table"
-msgstr "A partíciós tábla visszatöltése"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "A partíciós tábla helyreállítása"
-
-#: ../../diskdrake_interactive.pm_.c:289
-msgid "Reload partition table"
-msgstr "A partíciós tábla újratöltése"
-
-#: ../../diskdrake_interactive.pm_.c:293
-msgid "Removable media automounting"
-msgstr "Cserélhetõ lemez automatikus csatlakoztatása"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Fájlválasztás"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"A partíciós tábla két példányának mérete eltér!\n"
-"Folytassam a mûveletet?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Figyelmeztetés"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Helyezzen be egy floppylemezt a meghajtóba!\n"
-"A lemezen található adatok elvesznek"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Megpróbálom helyrehozni a partíciós táblát"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "Részletes információ"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Átméretezés"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Áthelyezés"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formázás"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Aktív"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Hozzáadás RAID-hez"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Hozzáadás LVM-hez"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Eltávolítás RAID-bõl"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Eltávolítás LVM-bõl"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "RAID módosítása"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Loopback-hez használva"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Új partíció létrehozása"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Kezdõszektor: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Méret (MB): "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "A fájlrendszer típusa: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Csatlakoztatási pont: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Beállítások: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-msgid "Remove the loopback file?"
-msgstr "El szeretné távolítani a loopback fájlt?"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "A partíciótípus megváltoztatása"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "Konvertálás ext2-rõl ext3-ra"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Hová szeretné csatlakoztatni a(z) %s loopback fájlt?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nem lehet megszüntetni a csatlakoztatási pontot, mert ez egy loopback\n"
-"partíció. Elõször távolítsa el a loopback-et."
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "A FAT fájlrendszer jellemzõinek kiszámítása"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Átméretezés"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Ezt a partíciót nem lehet átméretezni"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Készítsen biztonsági mentést errõl a partícióról"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"A(z) %s partíció átméretezésekor a partíción található adatok elvesznek"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Adja meg az új méretet"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "Az új méret (MB-ban): "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Melyik lemezre szeretné áthelyezni?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Szektor"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Melyik szektorra szeretné áthelyezni?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Áthelyezés"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Partíció áthelyezése..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Válassza ki azt a RAID-et, amelyikhez hozzá szeretné adni a lemezt"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "új"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Válassza ki azt az LVM-et, amelyhez hozzá szeretné adni a lemezt"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "Az LVM neve?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Ez a partíció nem használható loopback-hez"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "A loopback fájl neve: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-msgid "Give a file name"
-msgstr "Adjon meg egy fájlnevet"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Ez a fájl már egy másik loopback-hez van rendelve, válasszon egy másikat"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "A fájl már létezik, használjam?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "eszköz"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "szint"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "szeletméret"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Vigyázat! Ez a mûvelet adatvesztést okozhat."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Milyen típusú partícionálást szeretne?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Nem hozhatom létre a /boot-ot ennyire távol a merevlemez elejétõl (cilinder\n"
-"> 1024). Ha a LILO-t használja, akkor az nem fog mûködni, ha pedig nem\n"
-"használja a LILO-t, akkor nincs szükség a /boot-ra."
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Az a partíció, amelyet gyökérpartíciónak (/) jelölt ki, fizikailag az 1024.\n"
-"cilinder után található, és a rendszerben nincs /boot partíció.\n"
-"Ha a LILO-t szeretné használni, hozzon létre egy /boot partíciót."
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Szoftveres RAID partíciót választott ki gyökérpartíciónak (/).\n"
-"Egyik rendszerindító program sem tudja ezt kezelni /boot partíció nélkül,\n"
-"ezért mindenképpen hozzon létre egy /boot partíciót."
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "A(z) %s meghajtó partíciótáblájának mentése következik!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "A változások csak a rendszer újraindításakor lépnek életbe"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "A(z) %s partíció formázásakor a partíción található adatok elvesznek!"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Formázás"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "A(z) %s loopback fájl formázása"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "A(z) %s partíció formázása"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Hide files"
-msgstr "Fájlok elrejtése"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Move files to the new partition"
-msgstr "Fájlok áthelyezése az új partícióra"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"A(z) %s könyvtár már tartalmaz adatot\n"
-"(%s)"
-
-#: ../../diskdrake_interactive.pm_.c:906
-msgid "Moving files to the new partition"
-msgstr "Fájlok áthelyezése az új partícióra"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr "%s másolása"
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, c-format
-msgid "Removing %s"
-msgstr "%s eltávolítása"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Eszköz: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-meghajtó betûjele: %s (ez csak egy tipp)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Típus: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Név: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Kezdõszektor: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Méret: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s szektor"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "A(z) %d. cilindertõl a(z) %d. cilinderig\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Formázva\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Nincs formázva\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Csatlakoztatva\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback fájl(ok):\n"
-"   %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Az alapértelmezett indítási partíció\n"
-"    (a DOS-nak, nem a LILO-nak)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "%s. szint\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "A szelet mérete: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID lemezek: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "A loopback fájl neve: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Ez a partíció valószínûleg\n"
-"meghajtóknak van fenntartva,\n"
-"ne módosítson rajta.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ez egy speciális rendszerindítási\n"
-"partíció (hogy többféle operációs\n"
-"rendszert lehessen indítani).\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Méret: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilinder, %s fej, %s szektor\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Információ: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-lemezek: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "A partíciós tábla típusa: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "busz: %d, id: %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Beállítások: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formázás sikertelen a(z) %s eszközön"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nem tudom, hogyan kell megformázni a(z) %s eszközt %s típusúra"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "a csatlakoztatás nem sikerült"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "Az fsck kilépett %d hibakóddal vagy %d. szignállal"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "a csatlakoztatás nem sikerült: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "hiba történt a(z) %s leválasztásakor: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "egyszerû"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "kiszolgáló"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Nem lehet JFS-t használni 16 MB-nál kisebb partíción"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Nem lehet ReiserFS-t használni 32 MB-nál kisebb partíción"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "A csatlakoztatási pontoknak /-rel kell kezdõdni"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Már van egy partíció amelynek %s a csatlakoztatási pontja\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Nem használható LVM logikai kötet a(z) %s csatlakoztatási ponthoz"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Ennek a könyvtárnak a gyökér-fájlrendszeren belül kell maradnia"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Valódi fájlrendszert (ext2, ReiserFS) kell használni ennél a csatlakoztatási "
-"pontnál\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Hiba történt %s írásra való megnyitásánál: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Hiba történt - nincs olyan meghajtó, amelyen új fájlrendszert lehetne "
-"létrehozni. Ellenõrizze a gépben található eszközöket."
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Egyetlen partíció sincs!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"A GNU/Linux többfelhasználós rendszer; ez azt jelenti, hogy minden\n"
-"felhasználónak lehetnek például külön beállításai és saját fájljai.\n"
-"További információkat a Felhasználói Kézikönyvbõl lehet megtudni.\n"
-"A \"root\" nevû felhasználótól (ez az azonosító a rendszergazdát jelöli)\n"
-"eltérõen az itt felvett felhasználóknak csak a saját fájljaikat és a saját\n"
-"beállításaikat lesz joguk módosítani. Javasolt legalább egy \"normál\"\n"
-"felhasználót felvenni az Ön saját használatára. Ezen normál felhasználói\n"
-"azonosítóval érdemes elvégezni az olyan tevékenységeket, amelyek nem\n"
-"igényelnek rendszergazdai jogosultságot. Bár nagyon praktikus minden\n"
-"alkalommal rendszergazdaként jelentkezni be, ez nagyon veszélyes is.\n"
-"Rendszergazdaként használva a legapróbb hiba hatására is meghibásodhat\n"
-"a rendszer. Ha normál felhasználóként követ el hibát, akkor esetleg\n"
-"elveszít bizonyos adatokat, de a rendszert nem teheti tönkre.\n"
-"\n"
-"Elõször is meg kell adnia a valódi nevét. Ez természetesen nem kötelezõ;\n"
-"bármit be lehet írni névként. A telepítõ a megadott név elsõ szavát\n"
-"ajánlja fel a \"Felhasználónév\" mezõben. Ez utóbbi az a név, amellyel\n"
-"az adott felhasználó be tud majd jelentkezni a rendszerbe. A felkínált név\n"
-"módosítható. A felhasználónév megadása után meg kell adni az ahhoz tartozó\n"
-"kívánt jelszót. Egy normál felhasználó jelszava biztonsági szempontból nem\n"
-"annyira kritikus, mint a rendszergazdáé; ez viszont nem ok arra, hogy\n"
-"felületesen legyen kezelve - végül is az Ön fájljairól van szó.\n"
-"\n"
-"A \"Név elfogadása\" gombbal vehetõ fel újabb felhasználó. Bármennyi\n"
-"felhasználó létrehozható. Vegyen fel egy-egy felhasználónevet mindazok\n"
-"számára, akik a gépet használni fogják. Amikor végzett a felhasználónevek\n"
-"létrehozásával, kattintson a \"Kész\" gombra.\n"
-"\n"
-"Ha a \"Speciális\" gombra kattint, módosíthatja az adott felhasználó\n"
-"alapértelmezett parancsértelmezõjét (alapértelmezés szerint ez a \"bash\")."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Fent láthatók a lemezen talált, már létezõ linuxos partíciók.\n"
-"A varázsló javaslatai általában elfogadhatók, általános célú telepítésnél\n"
-"általában megfelelnek. Ha megváltoztatja a beállításokat, mindenképpen\n"
-"jelölje ki a gyökérpartíciót (\"/\"). Ne válassza túl kicsire, mert akkor\n"
-"nem lesz elég hely a szoftverek telepítéséhez. Ha külön partícióra\n"
-"szeretné helyezni a felhasználói adatokat, jelöljön ki egy külön \"/home\"\n"
-"partíciót (ez csak akkor lehetséges, ha legalább két Linux partíció\n"
-"létezik).\n"
-"\n"
-"A partíciók listájának mezõi: \"név\", \"kapacitás\".\n"
-"\n"
-"A \"név\" képzési szabálya: \"a merevlemez típusa\", \"a lemez\n"
-"azonosítója\", \"a partíció azonosítója\" (például \"hda1\").\n"
-"\n"
-"\"A merevlemez típusa\" \"hd\", ha a lemez IDE-csatolós, és \"sd\",\n"
-"ha SCSI-csatolós.\n"
-"\n"
-"\"A lemez azonosítója\" egy betû a \"hd\" illetve az \"sd\" után.\n"
-"IDE-csatolós merevlemezek esetén:\n"
-"\n"
-"  - \"a\" jelentése: \"elsõ (master) meghajtó az elsõ IDE-vezérlõn\"\n"
-"\n"
-"  - \"b\" jelentése: \"második (slave) meghajtó az elsõ IDE-vezérlõn\"\n"
-"\n"
-"  - \"c\" jelentése: \"elsõ meghajtó a második IDE-vezérlõn\"\n"
-"\n"
-"  - \"d\" jelentése: \"második meghajtó a második IDE-vezérlõn\"\n"
-"\n"
-"SCSI-csatolós lemezeknél az \"a\" jelentése: \"a legalacsonyabb\n"
-"SCSI-azonosító\", \"b\" jelentése: \"a második legalacsonyabb\n"
-"SCSI-azonosító\", ..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"A Mandrake Linux telepítõanyag több CD-n helyezkedik el. Ha egy "
-"kiválasztott\n"
-"csomag egy másik CD-n található, akkor a DrakX (a telepítõ) kiadja az\n"
-"aktuális CD-t, és megkéri Önt, hogy helyezzen be egy másikat."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Most meg kell adnia, mely programokat kívánja telepíteni a rendszerére.\n"
-"Több ezer program létezik Mandrake Linuxhoz; természetesen Önnek nem\n"
-"szükséges mindet ismernie.\n"
-"\n"
-"Ha szabványos telepítést végez CD-rõl, akkor elõször meg kell adnia, mely\n"
-"CD-kkel rendelkezik (csak a szakértõi módra igaz). Nézze át a CD-k címeit,\n"
-"és jelölje be az elérhetõ CD-ket a listában. Ha készen áll a folytatásra,\n"
-"kattintson az \"OK\" gombra.\n"
-"\n"
-"A csomagok a gép lehetséges felhasználási területei szerint csoportokba\n"
-"vannak rendezve. Maguk a csoportok négy szakaszba vannak sorolva:\n"
-"\n"
-"  - \"Munkaállomás\": ha munkaállomásként tervezi használni a gépet, akkor\n"
-"    válasszon az ennek megfelelõ csoportok közül.\n"
-"\n"
-"  - \"Fejlesztés\": ha a gép programozásra is lesz használva, akkor\n"
-"    válassza ki a kívánt csoportokat.\n"
-"\n"
-"  - \"Kiszolgáló\": ha a gép kiszolgálóként lesz használva, itt lehetõség\n"
-"    van annak kiválasztására, hogy a gyakrabban használt szolgáltatások\n"
-"    közül melyeket kívánja telepíteni a gépre.\n"
-"\n"
-"  - \"Grafikus környezet\": itt választható ki a kívánt grafikus környezet.\n"
-"    Ha grafikus munkaállomást szeretne, akkor legalább egyet ki kell\n"
-"    választani.\n"
-"\n"
-"Ha az egérkurzort egy csoport neve fölé viszi, akkor megjelenik egy rövid\n"
-"magyarázat az adott csoportról.\n"
-"\n"
-"Bejelölheti a \"Csomagok egyedi kiválasztása\" opciót; ez akkor hasznos,\n"
-"ha Ön ismeri a felkínált csomagokat, illetve ha teljes mértékben\n"
-"ellenõrizni kívánja, mi lesz a gépre feltelepítve.\n"
-"\n"
-"Ha a telepítést \"Frissítés\" üzemmódban indította el, megszüntetheti akár\n"
-"az összes csoport kijelölését is, hogy elkerülje új programok telepítését.\n"
-"Ez különösen a rendszer helyreállításakor illetve frissítésekor lehet\n"
-"hasznos."
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Végül, attól függõen, hogy kívánt-e egyedi csomagkiválasztást használni,\n"
-"megjelenik egy fa, amely az összes telepíthetõ programcsomagot tartalmazza\n"
-"csoportokba és alcsoportokba kategorizálva. A fa böngészése közben\n"
-"nem csak csomagokat jelölhet ki, hanem egész csoportokat illetve\n"
-"alcsoportokat is.\n"
-"\n"
-"Amikor kiválaszt egy csomagot a fában, a jobb oldalon megjelenik egy leírás\n"
-"az adott csomagról. Ha végzett a kijelölésekkel, kattintson a \"Telepítés\"\n"
-"gombra; ennek hatására megkezdõdik a programok telepítése. A gép\n"
-"sebességétõl illetve a telepítendõ csomagok számától függõen a folyamat\n"
-"jelentõs idõt vehet igénybe. A telepítõ megjelenít egy becslést arra\n"
-"vonatkozóan, hogy mennyi idõ van hátra a telepítés befejeztéig.\n"
-"\n"
-"Ha kiszolgálócsomagok is ki lettek választva - akár közvetlenül, akár\n"
-"bizonyos csoportok tagjaként -, a telepítõ megerõsítést kér Öntõl arra\n"
-"vonatkozóan, hogy valóban telepíteni kívánja-e azon kiszolgálószoftvereket.\n"
-"A Mandrake Linux rendszerben alapértelmezésben az összes feltelepített\n"
-"kiszolgálóprogram elindításra kerül a rendszer indulásakor. Még ha azok\n"
-"biztonságosak is illetve nem rendelkeznek ismert problémákkal, akkor is\n"
-"elõfordulhat, hogy utóbb biztonsági problémák merülnek fel velük\n"
-"kapcsolatban. Ha nem tudja, hogy egy bizonyos - telepítésre kijelölt -\n"
-"szolgáltatásnak mi a feladata illetve miért kerül telepítésre, akkor\n"
-"kattintson a \"Nem\" gombra. Ha az \"Igen\" gombra kattint, akkor a\n"
-"felsorolt szolgáltatások telepítésre kerülnek, és alapértelmezés szerint\n"
-"automatikusan elindításra kerülnek majd.\n"
-"\n"
-"\"Az automatikusan kijelölt csomagok mutatása\" opció bejelölésének\n"
-"hatására a telepítõ jelezni fogja, ha automatikusan jelöl ki csomagokat\n"
-"telepítésre. Ilyesmi azért fordul elõ, mert bizonyos függõségek miatt\n"
-"szükség lehet további csomagok telepítésére is.\n"
-"\n"
-"A lista alatt levõ, floppylemezt ábrázoló ikon lehetõvé teszi egy korábbi\n"
-"telepítés során elmentett csomaglista betöltését. Ezen ikonra kattintva a\n"
-"telepítõ megkéri Önt, hogy tegyen be egy floppyt, amely egy korábbi\n"
-"telepítés végén készült. Ha szeretné megtudni, hogyan lehet ilyen floppyt\n"
-"készíteni, tekintse meg a telepítés utolsó lépésében szereplõ tippet."
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Ha szeretné a gépét az internetre vagy egy helyi hálózatra csatlakoztatni,\n"
-"válassza ki a megfelelõ opciót. Ha nincs bekapcsolva a megfelelõ eszköz,\n"
-"akkor kapcsolja be azt - még mielõtt kiválasztaná az adott opciót; ez\n"
-"lehetõvé teszi, hogy a telepítõ automatikusan felismerje az adott eszközt.\n"
-"\n"
-"A Mandrake Linux a telepítés közben felajánlja egy internetkapcsolat\n"
-"beállítását. A lehetséges kapcsolatok: hagyományos modem, ISDN-modem,\n"
-"ADSL-kapcsolat, kábelmodem, egyszerû helyi hálózati (LAN) kapcsolat\n"
-"(Ethernet).\n"
-"\n"
-"A lehetséges beállítások itt nem kerülnek részletezésre. A szükséges\n"
-"paramétereket az internet-szolgáltatótól illetve a\n"
-"rendszeradminisztrátortól tudhatja meg.\n"
-"\n"
-"A beállításokkal kapcsolatban a kézikönyv internetkapcsolatokkal foglalkozó\n"
-"fejezetébõl szerezhet további információkat. A kapcsolat beállítását nem\n"
-"szükséges a telepítés közben elvégezni; a kézikönyv leírja, hogyan lehet\n"
-"azt megtenni egy feltelepített rendszeren.\n"
-"\n"
-"Ha a hálózat beállítását a telepítés után kívánja elvégezni, illetve ha\n"
-"befejezte a hálózati kapcsolat beállítását, akkor kattintson a \"Mégsem\"\n"
-"gombra."
-
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Most lehet kijelölni az automatikusan elindítandó szolgáltatásokat.\n"
-"\n"
-"Itt látható a jelenleg telepített összes szolgáltatás listája.\n"
-"Vizsgálja meg a listát alaposan, és törölje a kijelölést azok mellõl,\n"
-"amelyek automatikus elindítására nincs szükség.\n"
-"\n"
-"Egy szolgáltatás kiválasztásakor mindig megjelenik a hozzá tartozó rövid\n"
-"leírás. Ha nem tudja biztosan, hogy a szolgáltatásra szükség van-e vagy\n"
-"sem, akkor ne változtassa meg az alapértelmezett indítási módot.\n"
-"\n"
-"Gondosan járjon el, ha a gépet kiszolgálónak fogja használni,\n"
-"ne indítson el egy olyan szolgáltatást sem automatikusan, amelyre nincs\n"
-"szükség. A feleslegesen elindított szolgáltatások biztonsági kockázatot\n"
-"jelentenek. Csak a tényleges feladatot ellátó szolgáltatásokat engedélyezze."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"A GNU/Linux az idõt a GMT (Greenwich Mean Time) alapján kezeli, és a\n"
-"kiválasztott helyi idõzónához igazítja a számolást."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-"Az X (teljes néven: X Window System) a GNU/Linux grafikus felületét nyújtó\n"
-"rendszer. A Mandrake Linuxban levõ grafikus környezetek (KDE, GNOME,\n"
-"AfterStep, WindowMaker, ...) ezen grafikus rendszert használják.\n"
-"A telepítõ most megkísérli automatikusan beállítani az X rendszert.\n"
-"\n"
-"Bizonyos - ritkán elõforduló - esetekben az automatikus beállítás nem\n"
-"hajtható végre; ez általában a nagyon régi illetve a nagyon új\n"
-"hardverelemek esetén van így.\n"
-"\n"
-"Ha sikeres a mûvelet, akkor az X rendszer automatikusan elindításra kerül\n"
-"a legmegfelelõbb grafikus felbontással (ez utóbbi a monitor méretétõl is\n"
-"függ). Egy ablaknak kell megjelennie, amelyben a telepítõ megkérdi Önt,\n"
-"hogy az ablak látható-e.\n"
-"\n"
-"Amennyiben \"Szakértõ\" módban végzi a telepítést, a telepítõ elindítja\n"
-"az X beállítási varázslót. A varázslóval kapcsolatban további információk\n"
-"a kézikönyvben találhatók.\n"
-"\n"
-"Ha látható az ablakban megjelenõ üzenet, akkor nyomja le az \"Igen\"\n"
-"gombot; a telepítõ ekkor a következõ lépésre ugrik. Ha viszont az üzenet\n"
-"nem látható, az azt jelenti, hogy a beállítás nem megfelelõ. A beállítás\n"
-"tesztelése 10 másodperc múlva automatikusan véget ér, a telepítõ ezután\n"
-"visszaállítja a képernyõt a korábbi üzemmódba."
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Amikor elõször próbálja ki az X beállításait, elképzelhetõ, hogy nem lesz\n"
-"megelégedve azokkal (például a képernyõ túl kicsi, vagy oldalirányban el\n"
-"van tolódva). Ezért a DrakX még abban az esetben is megkérdi Öntõl, hogy\n"
-"megfelelnek-e a beállítások, ha az X rendben elindul. A program megjelenít\n"
-"egy listát az általa felismert érvényes üzemmódokról. A listából\n"
-"kiválasztható egy megfelelõ grafikus mód.\n"
-"\n"
-"Végsõ esetben - ha az X rendszert nem sikerül mûködésbe hozni - válassza\n"
-"\"A grafikus kártya módosítása\" funkciót, majd az \"Unlisted\" (a\n"
-"listában nem szereplõ kártya) bejegyzést, amikor pedig a program megkérdi,\n"
-"hogy Ön melyik kiszolgálót szeretné, akkor válassza az \"FBDev\"-et.\n"
-"Ez egy biztonsági opció, amely bármely modern grafikus kártyával mûködik.\n"
-"Ezután válassza a \"Még egy próba\" funkciót a biztonság kedvéért."
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Végül el kell dönteni, hogy a rendszer grafikus módban induljon-e vagy sem.\n"
-"A program akkor is felteszi ezt a kérdést, ha Ön kihagyta a beállítások\n"
-"kipróbálását. Ha a gép kiszolgálóként fog üzemelni, vagy nem sikerült\n"
-"beállítani a grafikus módot, akkor a \"Nem\"-et érdemes választani."
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"A Mandrake Linux CD-nek van egy beépített helyreállítási üzemmódja. Ezen\n"
-"üzemmód a következõképpen érhetõ el: indítsa a rendszert a CD-rõl, majd\n"
-"nyomja le az \"F1\" billentyût, és gépelje be a megjelenõ parancssorban\n"
-"azt, hogy \"rescue\". Ha viszont a gép nem képes CD-rõl való\n"
-"rendszerindításra, vissza kell lépnie ezen lépésre segítségért - ez\n"
-"legalább két esetben szükséges lehet:\n"
-"\n"
-"  - A rendszerbetöltõ telepítésekor (hacsak Ön nem használ más\n"
-"    rendszerindító programot) a telepítõ módosítja a fõ lemez\n"
-"    betöltõszektorát (boot sector; más néven: MBR) annak érdekében, hogy\n"
-"    többféle operációs rendszert is be lehessen tölteni (például: GNU/Linux\n"
-"    és Windows). Ha Ön újratelepíti a Windowst, akkor a Microsoft-féle\n"
-"    telepítõ át fogja írni a betöltõszektort, és emiatt Ön nem lesz képes\n"
-"    GNU/Linuxt indítani.\n"
-"\n"
-"  - Ha probléma merül fel, és Ön nem tudja elindítani a GNU/Linux rendszert\n"
-"    a merevlemezrõl, akkor ezen floppy fogja jelenteni az egyetlen\n"
-"    lehetõséget arra, hogy elindítsa a rendszert. A floppy programokat\n"
-"    tartalmaz a rendszer helyreállításához (arra az esetre, ha például\n"
-"    áramkimaradás történt).\n"
-"\n"
-"Ha kéri ennek a lépésnek a végrehajtását, akkor a telepítõ megkéri Önt\n"
-"arra, hogy tegyen be egy floppyt a meghajtóba. Ügyeljen arra, hogy a\n"
-"floppylemezen ne legyen megõrzésre szánt adat. A lemezt nem szükséges\n"
-"elõzetesen formázni, mivel a telepítõ felülírja a teljes lemez tartalmát."
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Most kell megadni, hogy a Mandrake Linux telepítése a merevlemez melyik\n"
-"részére történjen. Ha a lemez még teljesen üres, vagy a korábban telepített\n"
-"operációs rendszer(ek) miatt nincs elég szabad hely, akkor újra kell\n"
-"partícionálni a lemezt. A partícionálás a lemezterület logikai\n"
-"újrafelosztását jelenti - erre a Mandrake Linux telepítéséhez szükséges\n"
-"hely létrehozása érdekében van szükség.\n"
-"\n"
-"A partícionálás veszélyes mûvelet. Hiba esetén adatvesztéssel járhat,\n"
-"ráadásul általában nincs lehetõség visszatérni egy korábbi állapothoz.\n"
-"Emiatt kezdõ felhasználóknak sok nehézséget okozhat. Ez a varázsló\n"
-"megkönnyíti a mûvelet végrehajtását, de mielõtt elindítaná, érdemes\n"
-"alaposan átolvasni a kézikönyv idevágó részét.\n"
-"\n"
-"Ha a telepítést szakértõi módban futtatja, el fog indulni a DiskDrake nevû\n"
-"program, amely a Mandrake Linux rendszer partícionálóeszköze. Ezen program\n"
-"lehetõvé teszi a partíciók módosítását. További információkat a kézikönyv\n"
-"DiskDrake-rõl szóló fejezetében olvashat. Az ott ismertetett varázslók a\n"
-"telepítõbõl is elindíthatók, ehhez a \"Varázsló\" gombot kell lenyomni.\n"
-"\n"
-"Ha a partíciók már definiálva vannak - akár egy korábbi telepítés által,\n"
-"akár egy másféle partícionálóeszköz által -, akkor egyszerûen válassza ki\n"
-"azokat a Linux rendszer telepítése számára.\n"
-"\n"
-"Ha a szükséges partíciók még nem állnak rendelkezésre, létre kell hozni\n"
-"azokat a varázslóval. A lemezek tartalmától függõen többféle módon lehet\n"
-"eljárni:\n"
-"\n"
-"  - \"A szabad terület felhasználása\": ez a lehetõség az üres meghajtók\n"
-"    automatikus partícionálását jelenti. További kérdést nem tesz fel a\n"
-"    telepítõ.\n"
-"\n"
-"  - \"Már létezõ partíció használata\": a varázsló talált egy vagy több\n"
-"    linuxos partíciót a lemezen. Ha ezeket szeretné használni a\n"
-"    telepítéshez, válassza ezt a lehetõséget.\n"
-"\n"
-"  - \"A Windows partíción található szabad hely felhasználása\": ha a\n"
-"    Windows úgy van feltelepítve a lemezre, hogy elfoglalja az összes\n"
-"    elérhetõ területet, akkor annak egy részét fel kell szabadítani a Linux\n"
-"    számára. Ez történhet a Windows-partíció törlésével (lásd \"A teljes\n"
-"    lemez törlése\" és a \"Szakértõi mód\" lehetõségeket) vagy\n"
-"    átméretezésével. Az átméretezés végrehajtható a lemezen levõ adatok\n"
-"    elvesztése nélkül. Ez utóbbi a javasolt megoldás abban az esetben, ha\n"
-"    a Mandrake Linuxt és a Microsoft Windowst ugyanazon a gépen szeretné\n"
-"    használni.\n"
-"\n"
-"    Ha ezt a lehetõséget választja, ne feledkezzen meg arról, hogy ennek\n"
-"    hatására a Microsoft Windows partíció mérete a mostaninál kisebb lesz,\n"
-"    tehát a Windows használatakor kevesebb hely lesz az adatok tárolására\n"
-"    és új szoftverek telepítésére.\n"
-"\n"
-"  - \"A teljes lemez törlése\": ha minden adatot és minden partíciót\n"
-"    törölni szeretne a lemezrõl, és a telepítéshez az így felszabaduló\n"
-"    helyet szeretné használni, akkor válassza ezt a lehetõséget. Legyen\n"
-"    nagyon óvatos ezzel a lehetõséggel, mert az adott partíciókon levõ\n"
-"    adatok véglegesen elvesznek a megerõsítés után.\n"
-"\n"
-"    Ha ezt a lehetõséget választja, a lemezen levõ összes adat elvész.\n"
-"\n"
-"  - \"A Windows(TM) eltávolítása\": ez a funkció egyszerûen letöröl mindent\n"
-"    a lemezrõl, és újrapartícionálja azt. A lemezen levõ összes adat\n"
-"    elvész.\n"
-"\n"
-"    Ha ezt a lehetõséget választja, a lemezen levõ összes adat elvész.\n"
-"\n"
-"  - \"Szakértõi mód\": ha közvetlenül (varázsló nélkül) szeretné elvégezni\n"
-"    a partícionálást, válassza ezt a lehetõséget. Legyen óvatos - sok\n"
-"    minden elvégezhetõ ebben az üzemmódban, de a használata veszélyes.\n"
-"    Könnyen elveszítheti a lemezen levõ összes adatot ennek a\n"
-"    használatával, ezért csak indokolt esetben válassza ezt a funkciót."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"A telepítés befejezõdött; a GNU/Linux rendszer készen áll a használatra.\n"
-"A rendszer újraindításához kattintson az \"OK\" gombra. Amikor a gép\n"
-"újraindul, elindíthatja a GNU/Linuxt vagy más operációs rendszert (ha több\n"
-"operációs rendszer van a gépen).\n"
-"\n"
-"A \"Speciális\" gomb (csak szakértõi módban) lenyomására két újabb gomb\n"
-"jelenik meg:\n"
-"\n"
-"  - \"Automatikus telepítõfloppy készítése\": olyan telepítõfloppy\n"
-"    készítése, amelynek használatával emberi közremûködés nélkül végezhetõ\n"
-"    a rendszer telepítése. Az így végzett telepítések a jelenlegi telepítés\n"
-"    beállításait használják.\n"
-"\n"
-"    Két lehetõség közül lehet választani a gomb lenyomása után:\n"
-"\n"
-"      - \"Újrajátszás\". Ez részben automatizált telepítést jelent;\n"
-"        a partícionálási lépés (csak az az egy) interaktív marad.\n"
-"\n"
-"      - \"Automatikus\". Teljesen automatizált telepítés; a merevlemez\n"
-"        tartalma felülíródik, az összes korábbi adat elvész.\n"
-"\n"
-"    Ez a lehetõség jól használható akkor, amikor nagyobb számú azonos gépre\n"
-"    kell a rendszert feltelepíteni. Az automatikus telepítéssel\n"
-"    kapcsolatban a Mandrake honlapján találhatók további információk.\n"
-"\n"
-"  - \"Csomagösszeállítás mentése\"(*): elmenti a korábban tett\n"
-"    csomagkijelölést (a kijelölt csomagok listáját). Ha egy újabb telepítés\n"
-"    alkalmával fel kívánja használni az elmentett listát, akkor helyezze be\n"
-"    az azt tartalmazó floppyt a telepítés megkezdésekor, majd nyomjon\n"
-"    \"F1\"-et, ezután pedig adja ki a következõ parancsot:\n"
-"    linux defcfg=\"floppy\"\n"
-"\n"
-"\n"
-"(*) Ehhez szükség lesz egy FAT fájlrendszerre formázott floppyra.\n"
-"    A formázás GNU/Linux alatt a következõ paranccsal végezhetõ el:\n"
-"    \"mformat a:\""
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Az újonnan létrehozott partíciók csak formázás után lesznek használhatók\n"
-"(a \"formázás\" lényegében egy fájlrendszer létrehozását jelenti).\n"
-"\n"
-"Most újraformázhat bizonyos, már létezõ partíciókat (ha azok tartalmát\n"
-"teljesen le kívánja törölni). Ha ezt kívánja tenni, jelölje ki azon\n"
-"partíciókat is.\n"
-"\n"
-"Nem szükséges újraformázni az összes, korábban létrehozott partíciót.\n"
-"Az operációs rendszernek szánt partíció(ka)t mindenképpen le kell formázni\n"
-"(például a \"/\", \"/usr\" és \"/var\" partíciókat), de a felhasználói\n"
-"és egyéb adatokat tartalmazó partíciókat nem szükséges újraformázni (ilyen\n"
-"például a \"/home\").\n"
-"\n"
-"Gondosan ellenõrizze, mely partíciókat jelöli ki, mert a formázás során az\n"
-"adott partíciókon levõ adatok törlõdnek, és késõbb nem nyerhetõk vissza.\n"
-"\n"
-"Kattintson az \"OK\" gombra a formázás megkezdéséhez.\n"
-"\n"
-"Kattintson a \"Mégsem\" gombra, ha más partícióra szeretné telepíteni a\n"
-"Mandrake Linux operációs rendszert.\n"
-"\n"
-"Kattintson a \"Speciális\" gombra, ha bizonyos partíciókat ellenõriztetni\n"
-"kíván (hibás blokkok keresése)."
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"A Mandrake Linux operációs rendszer telepítése folyik.\n"
-"A telepítendõ szoftverek mennyiségétõl és a gép sebességétõl\n"
-"függõen a telepítés igen sokáig eltarthat.\n"
-"\n"
-"Egy kis türelmet kérek..."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"Mielõtt továbblépne, olvassa át alaposan a licencegyezményt, mely az\n"
-"egész Mandrake Linux disztribúcióra érvényes, és ha nem fogadja el\n"
-"valamelyik feltételt, kattintson a \"Nem fogadom el\" gombra. Ekkor a\n"
-"telepítés azonnal félbeszakad. A telepítés folytatásához kattintson\n"
-"az \"Elfogadom\" gombra."
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Most ki kell választani egy biztonsági szintet a gép számára. Alapszabály,\n"
-"hogy minél inkább elérhetõ a gép, illetve minél több kritikus adat van azon\n"
-"tárolva, annál magasabbra érdemes venni a biztonsági szintet. Magasabb "
-"szint\n"
-"esetén viszont általában nehézkesebb a gép használata. A szintek "
-"jelentésével\n"
-"kapcsolatban a kézikönyv \"MSEC\" fejezetében találhatók további "
-"információk.\n"
-"\n"
-"Ha nem biztos benne, hogy mit volna érdemes választani, válassza az\n"
-"alapértelmezés szerinti lehetõséget."
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Most kell kiválasztani a Mandrake Linux rendszer telepítéséhez használni\n"
-"kívánt partíciókat. Ha a kívánt partíciók már létre lettek hozva (egy\n"
-"korábbi GNU/Linux-telepítés vagy valamilyen partícionálási segédprogram\n"
-"által), akkor felhasználhatók a már létezõ partíciók. Ha viszont még nem\n"
-"léteznek, akkor elõször definiálni kell a partíciókat.\n"
-"\n"
-"Partíció létrehozásánál elõször ki kell választani egy merevlemezt.\n"
-"Ehhez kattintson a megfelelõ azonosítóra: \"hda\" az elsõ IDE-csatolós\n"
-"lemez, \"hdb\" a második; \"sda\" az elsõ SCSI-csatolós lemez, és így\n"
-"tovább.\n"
-"\n"
-"A kijelölt merevlemez partícionálásánál az alábbi lehetõségek közül lehet\n"
-"választani:\n"
-"\n"
-"  - Teljes törlés: ennek hatására a kijelölt merevlemezen található összes\n"
-"    partíció törlésre kerül.\n"
-"\n"
-"  - Automatikus helyfoglalás: ez lehetõvé teszi Ext2 és lapozási partíciók\n"
-"    automatikus létrehozását a rendelkezésre álló üres területen.\n"
-"\n"
-"  - A partíciós tábla helyreállítása: ha a partíciós tábla megsérült, akkor\n"
-"    ezzel lehet megpróbálni annak kijavítását. Legyen nagyon óvatos, mert\n"
-"    a javítás nem mindig sikerül.\n"
-"\n"
-"  - Visszavonás: ezzel lehet a módosításokat visszavonni.\n"
-"\n"
-"  - Újratöltés: ennek hatására az összes módosítás elvész; a program\n"
-"    ismét betölti a kiindulási partíciós táblát.\n"
-"\n"
-"  - Varázsló: akkor válassza ezt a lehetõséget, ha a partícionálást "
-"varázsló\n"
-"    segítségével szeretné végrehajtani. Ha nem ismeri a partícionálás\n"
-"    technikai részleteit, akkor érdemes ezt választania.\n"
-"\n"
-"  - Visszatöltés: egy korábban elmentett partíciós tábla visszatöltése\n"
-"    floppyról.\n"
-"\n"
-"  - Mentés: a partíciós tábla mentése floppyra. A floppy használatával\n"
-"    késõbb - szükség esetén - helyre lehet állítani (vissza lehet tölteni)\n"
-"    a partíciós táblát. Erõsen ajánljuk, hogy használja ezt a lehetõséget.\n"
-"\n"
-"  - Kész: a partícionálás befejezése után ezzel lehet a módosításokat\n"
-"    elmenteni a lemezre.\n"
-"\n"
-"Az összes funkció elérhetõ a billentyûzetrõl is. A partíciók között a Tab\n"
-"billentyûvel és a fel/le nyilakkal lehet mozogni.\n"
-"\n"
-"Ha egy partíció ki van jelölve, használni lehet a következõket:\n"
-"\n"
-"  - Ctrl+C: új partíció létrehozása (ha üres partíció van kijelölve)\n"
-"\n"
-"  - Ctrl+D: partíció törlése\n"
-"\n"
-"  - Ctrl+M: csatlakoztatási (mount) pont megadása\n"
-"\n"
-"Ha a telepítés egy PowerPC gépre történik, akkor érdemes létrehozni egy\n"
-"kisméretû HFS rendszerindítási partíciót (legalább 1 MB) a \"yaboot\"\n"
-"rendszerbetöltõ program számára. Ha nagyobbra veszi a partíciót (például\n"
-"50 MB méretûre), akkor eltárolható lesz rajta például egy tartalék kernel\n"
-"illetve RAM-diszk képfájlok (image-ek) esetleges rendszerhibák esetére."
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Egynél több Microsoft Windows partíciót találtam a lemezen.\n"
-"Válassza ki azt, amelyiket át szeretné méretezni, hogy a\n"
-"Mandrake Linux feltelepíthetõ legyen.\n"
-"\n"
-"A partíciólista a következõ mezõket tartalmazza: \"linuxos név\",\n"
-"\"windowsos név\", \"kapacitás\".\n"
-"\n"
-"A \"linuxos név\" formátuma a következõ: \"a merevlemez típusa\",\n"
-"\"a lemez azonosítója\", \"a partíció azonosítója\" (például \"hda1\").\n"
-"\n"
-"Ha a lemez IDE-csatolós, akkor \"a merevlemez típusa\" \"hd\",\n"
-"ha pedig SCSI-csatolós, akkor \"sd\".\n"
-"\n"
-"\"A lemez azonosítója\" mindig egy betû a \"hd\" illetve az \"sd\" után.\n"
-"IDE-csatolós meghajtók esetén:\n"
-"\n"
-"  - \"a\" jelentése: \"elsõ (master) meghajtó az elsõ IDE-vezérlõn\"\n"
-"\n"
-"  - \"b\" jelentése: \"második (slave) meghajtó az elsõ IDE-vezérlõn\"\n"
-"\n"
-"  - \"c\" jelentése: \"elsõ meghajtó a második IDE-vezérlõn\"\n"
-"\n"
-"  - \"d\" jelentése: \"második meghajtó a második IDE-vezérlõn\"\n"
-"\n"
-"SCSI-csatolós meghajtóknál az \"a\" jelentése: \"a legalacsonyabb\n"
-"SCSI-azonosító\", \"b\" jelentése: \"a második legalacsonyabb\n"
-"SCSI-azonosító\", és így tovább.\n"
-"\n"
-"A \"windowsos név\" a meghajtó Windows alatt használt azonosítója\n"
-"(az elsõ lemez vagy partíció neve \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Egy kis türelmet kérek, a mûvelet több percet is igénybe vehet."
-
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Most közölnie kell a telepítõvel, hogy alapértelmezés szerinti\n"
-"(\"Ajánlott\") telepítést szeretne-e végezni, vagy pedig nagyobb befolyást\n"
-"szeretne a telepítési folyamat felett (\"Szakértõ\"). Választhat továbbá\n"
-"a következõ két lehetõség közül: új telepítés illetve egy meglevõ Mandrake\n"
-"Linux rendszer frissítése. Ha a \"Telepítés\" lehetõséget választja, a\n"
-"korábbi rendszere felülírásra kerül. Ha egy meglevõ rendszert szeretne\n"
-"frissíteni illetve helyreállítani, akkor a \"Frissítés\" funkciót válassza.\n"
-"\n"
-"Válassza a \"Telepítés\" lehetõséget, ha nincsen korábbi Mandrake Linux\n"
-"telepítve, vagy ha több operációs rendszert szeretne a gépen.\n"
-"\n"
-"Válassza a \"Frissítés\" lehetõséget, ha egy korábban telepített Mandrake\n"
-"Linux rendszert szeretne frissíteni vagy helyreállítani.\n"
-"\n"
-"A GNU/Linuxszal kapcsolatos tudásától függõen válassza ki a következõ\n"
-"lehetõségek közül a Mandrake Linux operációs rendszer telepítésének illetve\n"
-"frissítésének módját:\n"
-"\n"
-"  - \"Ajánlott\": válassza ezt, ha még nem telepített GNU/Linux operációs\n"
-"    rendszert. A telepítés nagyon egyszerû lesz; csak néhány kérdést fog\n"
-"    Önnek feltenni a telepítõ.\n"
-"\n"
-"  - \"Szakértõ\": ha több ismerettel rendelkezik a GNU/Linux rendszerrel\n"
-"    kapcsolatban, akkor érdemes lehet ezt a telepítési módot választania.\n"
-"    A szakértõi mód lehetõvé teszi, hogy Ön testreszabott telepítést\n"
-"    végezzen. Bizonyos kérdések megválaszolása nehéz lehet, ha Ön nem\n"
-"    rendelkezik alaposabb GNU/Linux-ismeretekkel; ezért fontolja meg, hogy\n"
-"    ezt a lehetõséget választja-e."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normál esetben a DrakX kiválasztja a megfelelõ billentyûzetet (a választott\n"
-"nyelvtõl függõen), és Ön nem is fogja látni ezt a lépést. Viszont\n"
-"elképzelhetõ, hogy Önnek nem a nyelvének megfelelõ billentyûzete van;\n"
-"például ha Ön egy angolul beszélõ magyar ember, akkor lehet, hogy magyar\n"
-"billentyûzetkiosztást szeretne. Hasonló helyzet adódhat, ha az Ön nyelve\n"
-"magyar, de Ön Quebecben tartózkodik. Mindkét esetben vissza kell lépnie\n"
-"erre a telepítési lépésre és ki kell választania egy megfelelõ\n"
-"billentyûzetet a listából.\n"
-"\n"
-"Hogy megjelenjen a támogatott billentyûzetek teljes listája, kattintson\n"
-"az \"Egyéb\" nyomógombra."
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-"Válassza ki a telepítéshez és a telepített rendszerhez használandó nyelvet.\n"
-"\n"
-"A \"Speciális\" nyomógombra kattintva kiválaszthatók további telepítendõ\n"
-"nyelvek. További nyelvek választása esetén telepítésre kerülnek az adott\n"
-"nyelvekhez tartozó fájlok is - a rendszerdokumentáció és az alkalmazások\n"
-"szövegei. Ha például a gépet spanyol felhasználók is használni fogják,\n"
-"akkor a fõ nyelvnek (például magyar) a fában történõ kiválasztását követõen\n"
-"a Speciális részben kattintson a \"Spanish|Spain\" (spanyol|Spanyolország)\n"
-"bejegyzéshez tartozó szürke csillagra.\n"
-"\n"
-"Több nyelv is telepíthetõ. Ha kijelölte az összes kívánt nyelvet,\n"
-"kattintson az \"OK\" gombra a folytatáshoz."
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-"Alapértelmezésben a DrakX feltételezi, hogy Ön kétgombos egérrel\n"
-"rendelkezik, és alapértelmezésként a program beállítja a harmadik egérgomb\n"
-"emulálását. A program felismeri, hogy milyen fajtájú az egér: PS/2, soros\n"
-"vagy USB.\n"
-"\n"
-"Ha Ön másféle egértípust szeretne megadni, válassza ki a megfelelõ típust\n"
-"a listából.\n"
-"\n"
-"Ha az alapértelmezettõl eltérõ egeret választ, akkor megjelenik egy\n"
-"tesztelési képernyõ. Használja az egérgombokat és a görgõt, hogy\n"
-"ellenõrizze a beállítások helyességét. Ha az egér nem mûködik helyesen,\n"
-"akkor nyomja le a Szóköz vagy az Enter (Return) billentyût, és válasszon\n"
-"egy másik fajta egeret."
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Válassza ki a megfelelõ portot. Például a windowsos COM1 soros portot\n"
-"GNU/Linux alatt ttyS0-nak hívják."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Ez a legkritikusabb pont a GNU/Linux rendszer biztonságára vonatkozóan:\n"
-"meg kell adni a \"root\" nevû felhasználó jelszavát. A \"root\" azonosító\n"
-"a rendszeradminisztrátort jelöli; ez az egyetlen olyan felhasználó,\n"
-"amelynek joga van rendszerfrissítést végezni, felhasználókat létrehozni,\n"
-"módosítani a rendszerbeállításokat illetve hasonló tevékenységeket végezni.\n"
-"Röviden szólva: a \"root\" felhasználó bármit megtehet a rendszeren.\n"
-"Ez az, amiért a jelszót úgy kell megválasztani, hogy azt minél nehezebb\n"
-"legyen kitalálni. A telepítõ jelzi az Ön számára, ha a jelszót könnyen\n"
-"kitalálhatónak tartja. Nem kötelezõ megadni jelszót, de erõsen javasolt;\n"
-"ha másért nem is, a következõ miatt: ne gondolja, hogy ha Ön GNU/Linux\n"
-"rendszert indít, akkor a gépen levõ többi operációs rendszer feltétlenül\n"
-"védve van az esetlegesen elkövetett hibáktól. A \"root\" felhasználóra nem\n"
-"vonatkoznak a korlátozások; ha például óvatlanul kezeli a partíciókat,\n"
-"akkor akár le is törölheti az azokon levõ adatokat; ezért fontos, hogy\n"
-"a rendszeradminisztrátori azonosító védve legyen.\n"
-"\n"
-"A jelszónak betûkbõl és számokból kell állni, és legalább 8 karakter\n"
-"hosszúságúnak kell lenni. Soha ne írja le a rendszeradminisztrátori\n"
-"jelszót - ez veszélyt jelenthetne a rendszerre.\n"
-"\n"
-"A fentiek ellenére ne válasszon túl hosszú vagy túl bonyolult jelszót, mert\n"
-"Önnek fejben kell tartania azt.\n"
-"\n"
-"A jelszó nem jelenik meg a képernyõn, amikor Ön begépeli azt. Emiatt\n"
-"kétszer kell azt beírni - ezáltal csökken az esélye annak, hogy Ön elgépeli\n"
-"a jelszót. Ha esetleg ugyanazt a gépelési hibát követi el a jelszó elsõ\n"
-"és második megadásánál, akkor ezen - helytelenül írt - jelszóval kell majd\n"
-"bejelentkezni a rendszerbe.\n"
-"\n"
-"Szakértõi mód esetén a telepítõ megkérdi, hogy szükség van-e azonosítási\n"
-"kiszolgáló (authentication server) használatára (NIS, LDAP, ...).\n"
-"\n"
-"Ha az Ön hálózata LDAP protokollt (illetve NIS-t) használ azonosításhoz,\n"
-"akkor válassza az \"LDAP\" (illetve \"NIS\") lehetõséget azonosítási\n"
-"módszerként. Ha nem tudja, mit kellene megadni, kérdezze meg a\n"
-"rendszergazdát.\n"
-"\n"
-"Ha a számítógép nem kapcsolódik semmilyen adminisztrált hálózathoz, akkor\n"
-"válassza a \"Helyi fájlok\" lehetõséget."
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-"A LILO és a GRUB rendszerindító programok a GNU/Linuxhoz. Ez a fázis\n"
-"általában teljesen automatikus. A telepítõ elemzi a lemez betöltõszektorát,\n"
-"és annak megfelelõen cselekszik, hogy ott mit talál:\n"
-"\n"
-"  - Ha windowsos betöltõszektort talál, akkor azt helyettesíteni fogja egy\n"
-"    GRUB/LILO betöltõszektorral. Ezért Önnek lehetõsége lesz arra is, hogy\n"
-"    GNU/Linuxt indítson, és arra is, hogy egy másik operációs rendszert.\n"
-"\n"
-"  - Ha GRUB vagy LILO betöltõszektort talál, helyettesíti azt egy új\n"
-"    példánnyal.\n"
-"\n"
-"Ha a telepítõ nem tud dönteni, akkor megjelenít egy párbeszédablakot\n"
-"különféle lehetõségekkel.\n"
-"\n"
-"  - \"A használni kívánt rendszerbetöltõ\": három lehetõség van:\n"
-"\n"
-"      - \"LILO, grafikus menüvel\": ha grafikus felületû LILO-t szeretne.\n"
-"\n"
-"      - \"GRUB\": ha a GRUB-ot szeretné használni (szöveges menü).\n"
-"\n"
-"      - \"LILO, szöveges menüvel\": ha szöveges felületû LILO-t szeretne.\n"
-"\n"
-"  - \"Rendszerindítási eszköz\": a legtöbb esetben nincs szükség az\n"
-"    alapértelmezett érték (\"/dev/hda\") módosítására, de ha kívánja, a\n"
-"    rendszerbetöltõ telepíthetõ a második merevlemezre is (\"/dev/hdb\"),\n"
-"    vagy akár floppylemezre is (\"/dev/fd0\").\n"
-"\n"
-"  - \"Várakozási idõ az alapértelmezett rendszer betöltése elõtt\": a gép\n"
-"    újraindításakor ennyi ideje van a felhasználónak a rendszerbetöltõ\n"
-"    menüjének megjelenését követõen arra, hogy kiválassza, melyik rendszert\n"
-"    kívánja elindítani (ha nem az alapértelmezettet).\n"
-"\n"
-"Legyen óvatos: ha nem telepít rendszerbetöltõt (azaz a \"Mégsem\" gombot\n"
-"nyomja le), biztosítania kell egy másféle módszert a Mandrake Linux\n"
-"rendszer elindítására. Továbbá: csak akkor módosítsa az opciókat, ha biztos\n"
-"abban, hogy tisztában van a funkciójukkal.\n"
-"\n"
-"A párbeszédablak \"Speciális\" gombjára kattintva további opciók válnak\n"
-"elérhetõvé - ezek a szakértõ felhasználók számára lesznek lényegesek.\n"
-"\n"
-"A Mandrake Linux a saját rendszerbetöltõjét telepíti, amellyel elindítható\n"
-"akár a GNU/Linux, akár más feltelepített operációs rendszer.\n"
-"\n"
-"Ha van másik operációs rendszer a gépen, az automatikusan fel lesz véve a\n"
-"betöltési menübe. Itt módosíthatók az aktuális beállítások. Egy meglevõ\n"
-"elemre duplán kattintva lehetõvé válik az adott bejegyzés paramétereinek\n"
-"módosítása illetve a bejegyzés eltávolítása. Új elemet a \"Hozzáadás\"\n"
-"funkcióval lehet felvenni. A telepítés következõ lépésére való ugrás a\n"
-"\"Kész\" gombbal lehetséges."
-
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"A LILO (a \"LInux LOader\" rövidítése) és a GRUB rendszerindító programok:\n"
-"a gép bekapcsolása után el tudják indítani a GNU/Linuxt vagy egy másik\n"
-"operációs rendszert. A telepítésekor a felismert operációs rendszerek\n"
-"bejegyzései általában létrejönnek. Ha valamilyen ok miatt ez nem történt\n"
-"meg, akkor itt kézzel létre lehet hozni õket. Ügyeljen a megfelelõ\n"
-"paraméterezésre!\n"
-"\n"
-"Ha valamelyik operációs rendszert nem akarja elérhetõvé tenni, akkor\n"
-"törölheti annak rendszerbetöltési bejegyzéseit, de ebben az esetben\n"
-"késõbb csak indítólemezzel tudja majd azt az operációs rendszert elindítani."
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Itt kell megadni, hogy hová kerüljenek a GNU/Linux\n"
-"operációs rendszer betöltéséhez szükséges adatok.\n"
-"\n"
-"Válassza \"A lemez elsõ szektora (MBR)\" opciót, ha\n"
-"nincs kizáró ok."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Itt lehet nyomtatórendszert választani a gép számára. Más operációs\n"
-"rendszerekben általában csak egy van, a Mandrake-ben viszont három is.\n"
-"\n"
-"  - \"pdq\": \"print, don't queue\", azaz sorba tevés nélkül történõ\n"
-"    nyomtatás. Akkor válassza ezt, ha közvetlen kapcsolat van a\n"
-"    nyomtatóval, és a nyomtató nincs hálózatba kötve. Ha ezt használja,\n"
-"    bizonyos problémákat (például papírberagadás) egyszerûbben tud kezelni.\n"
-"    Ez a módszer csak a legegyszerûbb hálózati szolgáltatásokat nyújtja, és\n"
-"    hálózaton eléggé lassú. Válassza a \"pdq\" módszert, ha nem rendelkezik\n"
-"    komolyabb GNU/Linux ismeretekkel. Lehetõsége van arra, hogy telepítés\n"
-"    után módosítsa ezt a beállítást; ehhez a PrinterDrake programot kell\n"
-"    futtatni a Mandrake Vezérlõközpontban - a szakértõi beállításokat kell\n"
-"    módosítani.\n"
-"\n"
-"  - \"CUPS\": \"Common Unix Printing System\", azaz általános Unix\n"
-"    nyomtatórendszer. Helyi és távoli nyomtatókra való nyomtatáshoz remekül\n"
-"    használható. Ez egy egyszerû rendszer, és képes a régi \"lpd\"\n"
-"    nyomtatórendszer kiszolgálójaként vagy klienseként funkcionálni -\n"
-"    vagyis kompatibilis a régebbi rendszerekkel. Nagy tudású rendszer,\n"
-"    viszont az alapvetõ beállítások majdnem olyan egyszerûen elvégezhetõk\n"
-"    benne, mint a \"pdq\" esetében. Ha arra használja, hogy egy \"lpd\"\n"
-"    kiszolgálót emuláljon vele, akkor aktiválnia kell a \"cups-lpd\"\n"
-"    szolgáltatást. Rendelkezik grafikus felülettel, amely nyomtatásra\n"
-"    illetve a nyomtatóparaméterek kiválasztására használható.\n"
-"\n"
-"  - \"lprNG\": \"line printer daemon New Generation\", azaz új-generációs\n"
-"    nyomtatószolgáltatás. Ez a rendszer nagyjából azt tudja, amit a többi\n"
-"    hasonló, de képes Novell hálózatra kötött nyomtatókra is nyomtatni,\n"
-"    mivel támogatja az IPX protokollt. Lehetõséget nyújt konzolos parancsok\n"
-"    felé történõ nyomtatásra is. Ha Önnek szüksége van a Novellre, illetve\n"
-"    ha parancsok felé kíván nyomtatni anélkül, hogy csõvezetéket használna,\n"
-"    akkor használja az lprNG rendszert. Ettõl eltérõ esetekben a CUPS\n"
-"    használata javasolt, mivel egyszerûbb és a hálózatkezelése is jobb."
-
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"A DrakX (a telepítõ) most megkeresi a gépben levõ IDE-eszközöket. Felderíti\n"
-"a PCI SCSI-kártyákat is. A program a felismert SCSI-kártyákhoz\n"
-"automatikusan feltelepíti a megfelelõ meghajtóprogramokat.\n"
-"\n"
-"Mivel a hardverfelderítés nem mindig ismeri fel a gépben levõ eszközöket,\n"
-"ezért a telepítõ rá fog kérdezni, van-e a gépben PCI SCSI-kártya.\n"
-"Ha tudja, hogy van a gépben SCSI-kártya, kattintson az \"Igen\"-re.\n"
-"Ez esetben egy listából lehet kijelölni a kártyát. Ha nincsen SCSI\n"
-"hardver a gépben, akkor kattintson a \"Nem\" gombra. Ha nem biztos a\n"
-"válaszban, megtekintheti a megtalált hardverelemek listáját\n"
-"\"A hardverjellemzõk megjelenítése\" funkciót kiválasztva, majd\n"
-"az \"OK\"-ra kattintva. Vizsgálja meg a listát, majd kattintson az\n"
-"\"OK\" gombra a SCSI-val kapcsolatos kérdéshez való visszatéréshez.\n"
-"\n"
-"Ha kézzel kell megadnia a kártya típusát, a telepítõ megkérdezi, hogy\n"
-"szeretné-e megadni a kártya jellemzõit. Általában erre nincs szükség,\n"
-"mivel a program le tudja kérdezni a megfelelõ beállításokat. A legtöbb\n"
-"esetben ez jól mûködik.\n"
-"\n"
-"Ha a telepítõ nem tudja meghatározni a szükséges jellemzõket, akkor\n"
-"Önnek kell megadnia a meghajtóprogram paramétereit. Olvassa el a\n"
-"Felhasználói Kézikönyv 3. fejezetének \"Hardverinformációk összegyûjtése\"\n"
-"címû szakaszát, ahonnan megtudhatja, hogyan lehet információt szerezni\n"
-"a szükséges paraméterekkel kapcsolatban a hardver dokumentációjából, a\n"
-"gyártó honlapjáról (ha rendelkezik internet-hozzáféréssel) illetve a\n"
-"Microsoft Windowsból (ha használta azzal az illetõ hardvert)."
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"További bejegyzéseket lehet felvenni a yaboot-ba, például más operációs\n"
-"rendszereket, további kerneleket vagy hibajavítási kernelt.\n"
-"\n"
-"Más operációs rendszereknél a bejegyzés egy címkébõl és az indítási\n"
-"partíció nevébõl áll.\n"
-"\n"
-"Linux esetén a következõ beállítások lehetnek:\n"
-"\n"
-"  - Címke: ezt a nevet a yaboot-ba begépelve lehet majd elindítani a\n"
-"    megadott operációs rendszert.\n"
-"\n"
-"  - Indítófájl: a rendszer indítási fájljának neve. Általában \"vmlinux\",\n"
-"    vagy ugyanez valamilyen kiterjesztéssel.\n"
-"\n"
-"  - Gyökér: a telepített Linux rendszer gyökérpartíciója (\"/\").\n"
-"\n"
-"  - Hozzáfûzés: Apple gépeknél ez az opciót gyakran használják a\n"
-"    videókártya inicializálásához illetve a gyakran hiányzó második és\n"
-"    harmadik egérgomb billentyûzetrõl történõ emulálásának beállításához.\n"
-"    Néhány példa látható az alábbiakban:\n"
-"\n"
-"      video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"      video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-"  - Kezdeti RAM-diszk: ez az opció használható modulok betöltésére még\n"
-"    azelõtt, hogy a rendszerindítási eszköz elérhetõ lenne, vagy egy\n"
-"    RAM-diszkes fájl betöltésére hibaelhárításnál.\n"
-"\n"
-"  - A RAM-diszk mérete: az alapértelmezett RAM-diszk-méret általában 4096\n"
-"    bájt. Ha nagyobb méretet szeretne, használja ezt a lehetõséget.\n"
-"\n"
-"  - Írható-olvasható: általában a gyökérpartíció csatlakoztatása elõször\n"
-"    csak-olvasható módban történik, hogy az aktiválás elõtt ellenõrizni\n"
-"    lehessen a fájlrendszer integritását. Itt lehet felülbírálni ezt az\n"
-"    eljárást.\n"
-"\n"
-"  - NoVideo: ha például egy Apple gép videókártyáját nem sikerül mûködésre\n"
-"    bírni, válassza ezt az opciót a \"novideo\" módú indításhoz (natív\n"
-"    framebuffer-támogatással).\n"
-"\n"
-"  - Alapértelmezés: az ezzel megjelölt bejegyzés lesz az alapértelmezett\n"
-"    operációs rendszer, melynek kiválasztásához elég megnyomni az Enter\n"
-"    billentyût a yaboot promptnál. A bejegyzés mellett megjelenik egy\n"
-"    \"*\" karakter, ha Ön megjeleníti a lehetõségek listáját a Tab\n"
-"    billentyûvel."
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"A Yaboot egy rendszerindító program a \"NewWorld\" Macintosh gépekhez.\n"
-"Elindíthatók vele a gépen található GNU/Linux, MacOS és MacOS X példányok.\n"
-"Általában a telepítõprogram felismeri ezeket az operációs rendszereket és\n"
-"létrehozza a megfelelõ bejegyzéseket. De ha nem így történik, akkor kézzel,\n"
-"utólag is létrehozható a megfelelõ bejegyzés. Gondosan ellenõrizze a\n"
-"megadott paramétereket.\n"
-"\n"
-"A Yaboot legfontosabb paraméterei:\n"
-"\n"
-"  - Indítási üzenet: egyszerû szöveges üzenet, amely az indítási prompt\n"
-"    elõtt jelenik meg.\n"
-"\n"
-"  - Rendszerindítási eszköz: ezzel adható meg, hogy hova kerüljön a\n"
-"    rendszerindításhoz szükséges információ. Általában egy elõzõleg már\n"
-"    létrehozott rendszerindítási partícióra mutat.\n"
-"\n"
-"  - Késleltetés Open Firmware-nél: a LILO-tól eltérõen a yaboot-nál kétféle\n"
-"    várakozási idõ létezik. Az elsõt másodpercben mérik, és akkor érvényes,\n"
-"    amikor a CD, az OF boot, a MacOS és a Linux közül választani lehet.\n"
-"\n"
-"  - Várakozási idõ rendszerindításkor: ez a késleltetési idõ a LILO-belihez\n"
-"    hasonló jellegû. A Linux kiválasztása után ennyi tizedmásodpercig vár\n"
-"    majd a program az alapértelmezett kernel betöltése elõtt.\n"
-"\n"
-"  - CD-rõl történhet rendszerindítás?: ennek bejelölésének hatására a \"C\"\n"
-"    is választható lesz a rendszerindítási promptnál (CD-rõl való indítás).\n"
-"\n"
-"  - OF-rõl történhet rendszerindítás?: ennek bejelölésének hatására az\n"
-"    \"N\" is választható lesz (Open Firmware-rõl való indítás) a\n"
-"    rendszerindítási promptnál.\n"
-"\n"
-"  - Az alapértelmezett op. rendszer?: itt lehet megadni, hogy melyik\n"
-"    operációs rendszer induljon el az Open Firmware várakozási idejének\n"
-"    letelte után."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-"Itt a gépének a különbözõ tulajdonságait láthatja. A telepített hardvertõl\n"
-"függõen a következõk jelenhetnek meg:\n"
-"\n"
-"  - \"Egér\": ellenõrizze a jelenlegi egérbeállításokat; a módosításukhoz\n"
-"    kattintson a gombra.\n"
-"\n"
-"  - \"Billentyûzet\": ellenõrizze a jelenlegi billentyûzet-kiosztást; a\n"
-"    módosításához kattintson a gombra.\n"
-"\n"
-"  - \"Idõzóna\": a telepítõ alapértelmezésben felkínál egy általa\n"
-"    megfelelõnek tartott idõzóna-beállítást, amelyet az Ön által választott\n"
-"    nyelv alapján határoz meg. Ugyanúgy, mint a billentyûzet esetén, itt\n"
-"    is elképzelhetõ, hogy Ön nem abban az országban tartózkodik, amelyre\n"
-"    a kiválasztott nyelv alapján következtetni lehet. Ezért szükség lehet\n"
-"    arra, hogy az \"Idõzóna\" gombra kattintson - hogy az órát a megfelelõ\n"
-"    idõzónához igazítsa.\n"
-"\n"
-"  - \"Nyomtató\": nyomtatóbeállítási varázsló elindítása.\n"
-"\n"
-"  - \"Hangkártya\": ha a telepítõ hangkártyát észlel a gépben, az itt fog\n"
-"    megjelenni. A telepítés során nincs lehetõség ennek a módosítására.\n"
-"\n"
-"  - \"TV-tuner kártya\": ha a telepítõ TV-kártyát észlel a gépben, az itt\n"
-"    fog megjelenni. A telepítés során nincs lehetõség ennek a módosítására.\n"
-"\n"
-"  - \"ISDN-kártya\": ha a telepítõ ISDN-kártyát észlel a gépben, az itt fog\n"
-"    megjelenni. Ha a gombra kattint, módosíthatja a paramétereit."
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Válassza ki azt a lemezt, amelyet törölni szeretne a Mandrake Linux\n"
-"telepítéséhez. Figyelem! A lemezen található adatok elvesznek, és\n"
-"késõbb nem nyerhetõk vissza!"
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Kattintson az \"OK\" gombra, ha a lemezen található összes adatot\n"
-"és partíciót törölni szeretné. Figyelem! Az \"OK\" gomb megnyomása után\n"
-"nincs mód a törölt adatok és partíciók visszaállítására, természetesen\n"
-"akkor sem, ha egy Windows-partíció törlõdött.\n"
-"\n"
-"Kattintson a \"Mégsem\" gombra, ha nem kívánja végrehajtani a mûveletet\n"
-"(a lemezen található partíciók és adatok ez esetben nem változnak)."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr "Nem érhetõk el a megfelelõ kernelmodulok (hiányzó fájl: %s)"
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"A következõ kiszolgálóprogramo(ka)t választotta ki: %s\n"
-"\n"
-"\n"
-"Alapértelmezés szerint ezek lesznek aktiválva. Nem tartozik hozzájuk ismert\n"
-"biztonsági javítás, de újak megjelenhetnek. Ha ez bekövetkezik, akkor minél\n"
-"hamarabb el kell végezni a frissítést.\n"
-"\n"
-"\n"
-"Biztosan telepíteni szeretné a kiszolgálóprogramo(ka)t?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Nem lehet broadcast-ot használni NIS tartomány nélkül"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Helyezzen egy FAT fájlrendszerre formázott floppyt a(z) %s meghajtóba"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Ezen a floppyn nincs FAT fájlrendszer"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Ha fel akarja késõbb használni ezt a csomagkijelölést, akkor a telepítést "
-"\"linux defcfg=floppy\" paraméterrel indítsa el."
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Hiba a(z) %s fájl olvasása közben"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "OK"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"A gép bizonyos hardverelemei speciális meghajtóprogramot igényelnek.\n"
-"Információk: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Feltétlenül kell lennie root partíciónak.\n"
-"Hozzon létre egy partíciót (vagy kattintson egy meglévõre).\n"
-"Utána adja meg csatolási pontnak a \"/\"-t."
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Kell legalább egy lapozási (swap) partíció"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nincs egy lapozási (swap) partíció sem.\n"
-"\n"
-"Ennek ellenére tovább szeretne lépni?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Kell egy FAT partíció a /boot/efi ponthoz csatlakoztatva"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "A szabad terület felhasználása"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nincs elég szabad terület új partíció létrehozásához"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Már létezõ partíció használata"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Nincs olyan már létezõ partíció, amit használhatnék"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "A loopback-hez a windowsos partíció használata"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Melyik partícióra szeretné a Linux4Win-t telepíteni?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Adja meg a méreteket"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "A root partíció mérete MB-ban: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "A lapozási (swap) partíció mérete MB-ban: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "A Windows partíción található szabad hely felhasználása"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Melyik partíciót szeretné átméretezni?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "A windowsos fájlrendszer jellemzõinek kiszámítása"
-
-# msgstr "A Windows fájlrendszer bounds kiszámítása"
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"A FAT-átméretezõ nem tudja kezelni a partíciót.\n"
-"A következõ hiba keletkezett: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"A windowsos partíció túlzottan töredezett. Futtassa elõbb a \"defrag\" "
-"programot."
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"FIGYELEM!\n"
-"\n"
-"A DrakX most átméretezi a windowsos partíciót. Ez a mûvelet veszélyes.\n"
-"Ha még nem tette meg, futtassa le a scandisk-et a windowsos partíción\n"
-"(esetleg a defrag programot is). Ehhez ki kell lépnie a telepítõbõl.\n"
-"Mentse le az adatokat, majd indítsa újra a telepítõt.\n"
-"Ha tudja, hogy mit tesz, nyomja meg az \"OK\"-t."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Mekkora helyet szeretne fenntartani a Windowsnak itt:"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "%s partíció"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "A FAT átméretezése nem sikerült: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nincs átméretezhetõ illetve loopback-ként használható FAT partíció, vagy "
-"nincs elég hely"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "A teljes lemez törlése"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "A Windows(TM) eltávolítása"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Több merevlemeze van. Melyikre telepítsem a Linuxot?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "MINDEN létezõ partíció és rajtuk minden adat elvész a(z) %s meghajtón"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Egyéni lemezpartícionálás"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Az fdisk használata"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Most partícionálható a(z) %s.\n"
-"Ha kész, ne feledje elmenteni a változásokat a \"w\"-vel"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nincs elég szabad hely a windowsos partíción"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Nincs elég szabad hely a telepítéshez"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "A DrakX partícionálási varázslója a következõket javasolja:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partícionálási hiba: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "A hálózatkezelés elindítása"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "A hálózatkezelés leállítása"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Hiba történt, de nem tudom megfelelõen lekezelni.\n"
-"Folytatás az Ön saját felelõsségére."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "A következõ csatolási pont kétszer van megadva: %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Néhány fontos csomagot nem tudtam telepíteni.\n"
-"Ez azt jelenti, hogy vagy a CD-ROM meghajtó, vagy a CD lemez\n"
-"hibás. A CD lemezt egy, már feltelepített gépen a következõ\n"
-"parancs segítségével tesztelheti le:\n"
-"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Üdvözöljük - %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Nincs elérhetõ floppy-meghajtó"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "A következõ lépés: `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Válassza ki a telepítendõ méretet"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Összméret: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Verzió: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Méret: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Válassza ki a telepítendõ csomagokat"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Információ"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Telepítés"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Telepítés"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Egy kis türelmet kérek, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Hátralévõ idõ "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Idõ összesen "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "A telepítés elõkészítése"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "A(z) %s csomag telepítése"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Ettõl függetlenül folytassam?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Hiba történt a csomagok rendezésekor:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Használjam a már meglévõ X11 beállításokat?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"A rendszer gyenge erõforrásokkal rendelkezik. Elõfordulhat, hogy problémái\n"
-"lesznek a Mandrake Linux telepítésével. Ha így történik, próbálkozzon\n"
-"szöveges módú telepítéssel: CD-rõl való rendszerindítást követõen nyomjon\n"
-"\"F1\"-et, majd írja be azt, hogy \"text\"."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Telepítési mód"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Válasszon a következõ telepítési módok közül:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Az Ön által kiválasztott csomagcsoportok összmérete kb. %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ha ennél kevesebb helyet szán a rendszernek,\n"
-"adjon meg egy százalékos értéket.\n"
-"\n"
-"Ha alacsony értéket ad meg, akkor a kiválasztott csomagok közül\n"
-"csak a fontosabbak kerülnek telepítésre; ha 100%%-ot ad meg,\n"
-"a DrakX minden kijelölt csomagot telepít."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"A merevlemezen csak a csomagok %d%%-ának van hely.\n"
-"\n"
-"Ha ennél kevesebbet kíván telepíteni,\n"
-"változtassa meg a kijelzett százalék értékét.\n"
-"Ha alacsony százalék-értéket ad meg, a telepítõ csak a\n"
-"legfontosabb csomagokat telepíti; ha %d%%-ot ad meg,\n"
-"akkor a lehetõ legtöbb csomag kerül telepítésre."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Részletesebben válogathat a következõ lépés részeként."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Telepítendõ csomagok százaléka"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Csomag-csoportok kiválasztása"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Csomagok egyedi kiválasztása"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Összméret: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Hibás csomag"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Név: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Fontosság: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Nem választhatja ki ezt a csomagot, mert nincs elég hely a merevlemezen."
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "A telepítõ a következõ csomagokat fogja telepíteni"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "A telepítõ a következõ csomagokat távolítja el"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Ez a csomag nem jelölhetõ ki illetve nem törölhetõ a kijelölése"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ez egy kötelezõ csomag, nem lehet megszüntetni a kijelölését"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Nem törölhetõ ennek a csomagnak a kijelölése, mert már telepítve van"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ezt a csomagot frissíteni kell!\n"
-"Biztos, hogy törölni kívánja a kijelölését?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-"Nem törölheti ennek a csomagnak a kijelölését. Ez a csomag frissítendõ!"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Az automatikusan kijelölt csomagok mutatása"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Betöltés/floppyra mentés"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "A csomagkiválasztás frissítése"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "Minimális telepítés"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Becslés"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Egy kis türelmet kérek; a telepítés elõkészítése folyik"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d csomag"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Figyelmeztetés\n"
-"\n"
-"Olvassa el alaposan az alábbi licencfeltételeket. Ha valamelyik részt nem\n"
-"fogadja el, akkor nem kezdheti el a telepítést a következõ CD-rõl. Ha a\n"
-"'Nem fogadom el' lehetõséget választja, akkor a telepítést ezen adathordozó\n"
-"kihagyásával kell folytatnia.\n"
-"\n"
-"\n"
-"A következõ CD-n található néhány szoftverkomponens nem a GPL\n"
-"(vagy más hasonló) licenc alá tartozik. Mindegyik ilyen komponens\n"
-"saját, egyéni licencegyezménnyel rendelkezik.\n"
-"Olvassa el és fogadja el ezeket a licencfeltételeket a komponens\n"
-"használatba vétele vagy továbbadása elõtt.\n"
-"Ezek a feltételek általában nem engedélyezik a komponens továbbadását,\n"
-"lemásolását (kivéve biztonsági másolatként), forgalomba hozását,\n"
-"visszafejtését, gépi kódú kilistázását, visszafordítását és módosítását.\n"
-"Bármelyik feltétel be nem tartása esetén a licenc érvényét veszti.\n"
-"Ha a licencegyezmény külön nem engedélyez többet, akkor a telepítés\n"
-"csak egy rendszerre engedélyezett, és a komponens nem használható\n"
-"közösen, a hálózaton. Ha pontosabb információra van szüksége,\n"
-"lépjen kapcsolatba a komponens forgalmazójával vagy készítõjével.\n"
-"A komponensek átadása, róluk másolat készítése harmadik fél részére\n"
-"általában nem engedélyezett (beleértve a dokumentációt is).\n"
-"\n"
-"\n"
-"A következõ CD-n található komponensek minden joga azok szerzõit illeti\n"
-"meg, és a szoftvertermékekre vonatkozó szellemi és szerzõi jogi\n"
-"törvények érvényesek rájuk.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Elfogadom"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Nem fogadom el"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Cserélje ki a CD-t a meghajtóban!\n"
-"\n"
-"Tegye be a(z) \"%s\" feliratú lemezt, és nyomja meg az \"OK\" gombot.\n"
-"Ha nincs ilyen lemeze, nyomja meg a \"Mégsem\" gombot, így errõl a CD-rõl\n"
-"nem történik telepítés."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Hiba történt a csomagok telepítésekor:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Hiba lépett fel"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Licencegyezmény"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Bevezetés\n"
-"\n"
-"A továbbiakban az operációs rendszerre és a Mandrake Linux disztribúcióban "
-"elérhetõ\n"
-"különféle komponensekre \"Szoftvertermékek\" néven hivatkozunk. A "
-"Szoftvertermékek körébe - nem\n"
-"kizárólagosan - beletartoznak az operációs rendszerhez és a Mandrake Linux "
-"disztribúció\n"
-"különféle komponenseihez kapcsolódó programok, módszerek, szabályok és "
-"dokumentáció.\n"
-"\n"
-"\n"
-"1. Licencegyezmény\n"
-"\n"
-"Kérjük, olvassa el jelen dokumentumot figyelmesen. Ezen dokumentum egy, a "
-"Szoftvertermékekre\n"
-"vonatkozó licencegyezmény Ön és a MandrakeSoft S.A. között.\n"
-"Ha a Szoftvertermékeket bármiféle módon telepíti, sokszorosítja vagy "
-"felhasználja,\n"
-"azzal Ön elfogadja jelen licenc kikötéseit és feltételeit, továbbá "
-"beleegyezik abba, hogy\n"
-"azoknak teljes mértékben megfelel.\n"
-"Ha Ön a Licenc bármely részével nem ért egyet, akkor az Ön számára nem "
-"engedélyezett a\n"
-"Szoftvertermékek telepítése, sokszorosítása illetve felhasználása.\n"
-"Bármely olyan kísérlet, amely a Szoftvertermékeknek a jelen licenc "
-"kikötéseitõl és feltételeitõl\n"
-"eltérõen való telepítésére, sokszorosítására illetve felhasználására "
-"irányul, érvénytelenítõ\n"
-"jellegû, és megvonja az Önnek ezen licenc által adott jogokat. A licencjogok "
-"megszûnését\n"
-"követõen Önnek azonnali hatállyal meg kell semmisítenie a Szoftvertermékek "
-"összes, Ön által\n"
-"birtokolt példányát.\n"
-"\n"
-"\n"
-"2. Korlátozott garancia\n"
-"\n"
-"A Szoftvertermékek és az azokhoz tartozó dokumentáció \"olyan amilyen\" "
-"állapotban állnak\n"
-"rendelkezésre. Garancia nincsen azokra - a törvények által engedélyezett "
-"mértékben.\n"
-"A MandrakeSoft S.A. - a törvények által engedélyezett mértékben - semmilyen "
-"körülmények\n"
-"között sem vonható felelõsségre a Szoftvertermékek használatából vagy "
-"használhatatlanságából\n"
-"származó speciális, elõre nem látott, közvetlen vagy közvetett károkért "
-"(korlátozás nélkül\n"
-"beleértve a következõket: üzleti veszteség, üzleti tevékenység megszakadása, "
-"pénzügyi\n"
-"veszteség, jogi díjak illetve bírósági ítéletbõl származó büntetés, vagy "
-"bármilyen\n"
-"származékos veszteség); még abban az esetben sem, ha a MandrakeSoft S.A. "
-"tájékoztatva lett\n"
-"az ilyesféle károk bekövetkezésének lehetõségérõl.\n"
-"\n"
-"KORLÁTOZOTT FELELÕSSÉG A BIZONYOS ORSZÁGOKBAN TILTOTT SZOFTVEREK "
-"BIRTOKLÁSÁVAL ILLETVE\n"
-"HASZNÁLATÁVAL KAPCSOLATBAN\n"
-"\n"
-"A MandrakeSoft S.A. és disztribútorai - a törvények által engedélyezett "
-"mértékben - semmilyen\n"
-"körülmények között sem vonhatók felelõsségre az olyan - speciális, elõre nem "
-"látott, közvetlen\n"
-"vagy közvetett - károkért (korlátozás nélkül beleértve a következõket: "
-"üzleti veszteség,\n"
-"üzleti tevékenység megszakadása, pénzügyi veszteség, jogi díjak illetve "
-"bírósági\n"
-"ítéletbõl származó büntetés, vagy bármilyen származékos veszteség), amely "
-"károk a\n"
-"szoftverkomponensek birtoklásából vagy használatából illetve a helyi "
-"törvények által\n"
-"tiltott vagy korlátozott szoftverkomponenseknek egy Mandrake Linux címrõl "
-"való\n"
-"letöltésébõl származnak.\n"
-"Ezen korlátozott felelõsség vonatkozik többek közt a Szoftvertermékekben "
-"levõ titkosító\n"
-"komponensekre is.\n"
-"\n"
-"\n"
-"3. A GPL és az ahhoz kapcsolódó licencek\n"
-"\n"
-"A Szoftvertermékek különbözõ személyek és intézmények által készített "
-"komponensekbõl állnak.\n"
-"A legtöbb komponensre a GNU General Public Licence (GNU Általános Nyilvános "
-"Licenc; a\n"
-"továbbiakban: GPL) és hasonló licencek kikötései és feltételei vonatkoznak.\n"
-"Ezen licencek java része lehetõvé teszi a megfelelõ komponensek használatát, "
-"sokszorosítását,\n"
-"módosítását illetve terjesztését. Bármely komponens használata elõtt olvassa "
-"el figyelmesen\n"
-"a komponensre vonatkozó licenc kikötéseit és feltételeit. Egy komponens "
-"licencére vonatkozó\n"
-"kérdést nem a MandrakeSoft céghez, hanem az adott komponens szerzõjéhez kell "
-"irányítani.\n"
-"A MandrakeSoft S.A. által fejlesztett programok a GPL licenc hatálya alá "
-"tartoznak.\n"
-"A MandrakeSoft S.A. által írt dokumentációs anyagokra egy speciális licenc "
-"vonatkozik.\n"
-"További részletek a dokumentációban.\n"
-"\n"
-"\n"
-"4. Szellemi tulajdonra vonatkozó jogok\n"
-"\n"
-"A Szoftvertermékek komponenseire vonatkozó összes jog az adott komponensek "
-"szerzõit illeti meg,\n"
-"és a szoftverekre vonatkozó szellemi tulajdoni illetve szerzõi jogi "
-"(copyright) törvények\n"
-"védelme alatt áll.\n"
-"A MandrakeSoft S.A. fenntartja a jogot arra, hogy módosítsa illetve "
-"átalakítsa a\n"
-"Szoftvertermékeket - teljes egészében vagy részben, bármilyen módon illetve "
-"bármilyen célra.\n"
-"A \"Mandrake\", a \"Mandrake Linux\" és az azokhoz tartozó logók a "
-"MandrakeSoft S.A. védjegyei.\n"
-"\n"
-"\n"
-"5. Vonatkozó törvények\n"
-"\n"
-"Ha jelen egyezmény bármely része bírósági ítélet alapján semmisnek, "
-"törvénytelennek vagy\n"
-"alkalmazhatatlannak van nyilvánítva, akkor azon rész jelen szerzõdésbõl "
-"kizárásra kerül.\n"
-"Az egyezmény többi - alkalmazható - részét Önnek továbbra is be kell "
-"tartania.\n"
-"Jelen licenc kikötései és feltételei Franciaország törvényeinek hatálya alá "
-"tartoznak.\n"
-"A jelen licenc kikötéseivel kapcsolatos viták lezárásának legelõnyösebb "
-"módja egy\n"
-"bíróságon kívül történõ megegyezés. Végsõ lehetõségként a vitás ügy a "
-"megfelelõ\n"
-"párizsi (Franciaország) bíróságra kerül.\n"
-"Ha jelen dokumentummal kapcsolatban kérdése van, vegye fel a kapcsolatot a "
-"MandrakeSoft S.A.\n"
-"céggel.\n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Billentyûzet"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Válasszon billentyûzetkiosztást."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Itt található a billentyûzetek listája"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Melyik telepítési módot választja?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Telepítés/frissítés"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Új telepítés vagy frissítés?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Ajánlott"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Szakértõ"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Frissítés"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Adja meg az egér típusát."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Egér port"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Válassza ki, hogy melyik soros porthoz csatlakozik az egere."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Egérgomb-emuláció"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "A 2. gomb emulálása"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "A 3. gomb emulálása"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA kártyák beállítása..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "IDE beállítások"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "nincs elérhetõ partíció"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Csatolási pontok keresése a partíciókon"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Válassza ki a csatolási pontokat"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Nem sikerült beolvasni a partíciós táblát, túl rossz állapotban van.\n"
-"Meg lehet próbálni a hibás partíciók alapállapotba hozását (MINDEN ADAT\n"
-"ELVÉSZ EZEKRÕL!). Ha ezt nem fogadja el, akkor a DrakX nem fogja módosítani\n"
-"a partíciós táblát (a hiba: %s).\n"
-"\n"
-"Törölni szeretné az összes partíciót?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"A DiskDrake nem tudta rendesen beolvasni a partíciós táblát.\n"
-"Folytatás az Ön saját felelõsségére."
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nincs elég szabad hely az 1 MB-os betöltõprogramnak! A telepítés "
-"folytatható, de a rendszer indításához létre kell hozni egy rendszerindító "
-"partíciót a DiskDrake-kel."
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "A gyökérpartíció nem található, ezért nem lehet elvégezni a frissítést"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Gyökérpartíció"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Melyik a gyökérpartíció (/) a rendszerben?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"A partíciós tábla változásai csak a gép újraindítása után lépnek érvénybe"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Válassza ki a formázandó partíciókat"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Ellenõrizzem a rossz blokkokat?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "A partíciók formázása"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s fájl létrehozása és formázása"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Betelt a lapozóterület, növelje meg a telepítés befejezéséhez"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "A rendelkezésre álló csomagok keresése"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "A frissítendõ csomagok keresése"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"A rendszeren nem maradt elég hely a telepítéshez vagy frissítéshez (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Teljes (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimális (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Javasolt (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Egyéni"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Válasszon egy funkciót annak megfelelõen, hogy betölteni kíván egy\n"
-"csomagkijelölést vagy a jelenlegi kijelölést szeretné elmenteni.\n"
-"A formátum ugyanaz, mint az automatikus telepítõfloppyknál."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Betöltés floppyról"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Betöltés floppyról"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Csomagkijelölés"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "Tegye be a csomagkijelölést tartalmazó floppyt a meghajtóba"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Mentés floppyra"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "A kijelölt összméret nagyobb, mint a rendelkezésre álló hely"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ha a felsorolt CD-k rendelkezésre állnak, kattintson az OK gombra.\n"
-"Ha egy CD sem áll rendelkezésre a felsoroltak közül, akkor kattintson\n"
-"a Mégsem gombra.\n"
-"Ha a felsoroltak közül néhány CD hiányzik, törölje a kijelölésüket, majd\n"
-"kattintson az OK gombra."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "A(z) \"%s\" címkéjû CD"
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"A(z) %s csomag telepítése\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Telepítés utáni beállítások"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Tegye be a rendszerindító floppyt a(z) %s meghajtóba"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Tegye be a frissítõmodulokat tartalmazó floppyt a(z) %s meghajtóba"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Most lehetõség nyílik arra, hogy titkosítással foglalkozó szoftverrészeket\n"
-"töltsön le.\n"
-"\n"
-"FIGYELEM:\n"
-"\n"
-"Mivel a titkosítással foglalkozó szoftvermodulok használatát különbözõ\n"
-"törvények szabályozzák, kizárólag a fogyasztó és/vagy felhasználó\n"
-"felelõssége eldönteni, hogy jogosult-e letölteni, tárolni és/vagy használni\n"
-"a kérdéses szoftvert.\n"
-"\n"
-"Továbbá, a fogyasztó és/vagy felhasználó különös figyelmet kell fordítson a\n"
-"helyi törvények és rendeletek betartására. Amennyiben a fogyasztó és/vagy\n"
-"felhasználó nem tartja be ezeket a törvényeket, súlyos büntetés szabható ki\n"
-"rá.\n"
-"\n"
-"A Mandrakesoft, a gyártók, vagy a szállítók semmilyen körülmények között\n"
-"sem tehetõk felelõssé azon speciális, közvetett vagy járulékos károk\n"
-"keletkezéséért (beleértve, de nem kizárólagosan, a következõket:\n"
-"profitveszteség, üzletmenetben bekövetkezett zavarok, kereskedelmi adatok\n"
-"vesztése, valamint bármilyen más anyagi kár és esetlegesen bíróság által\n"
-"megítélt kártérítés), amik azon szoftverek használatából, birtoklásából "
-"vagy\n"
-"csak a letöltésébõl erednek, amelyekhez a felhasználó és/vagy fogyasztó "
-"ezen\n"
-"megállapodás aláírása után hozzáférhet.\n"
-"\n"
-"\n"
-"Ha bármilyen kérdése van a fenti szerzõdéssel kapcsolatban, vegye fel\n"
-"a kapcsolatot a Mandrakesoft irodájával:\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Válasszon tükörkiszolgálót, ahonnan letölti a csomagokat"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Kapcsolatfelvétel a tükörkiszolgálóval, elérhetõ csomagok listájának "
-"letöltése"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Válassza ki a telepítendõ csomagokat."
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Melyik idõzónát választja?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "A gép órája GMT-idõt mutat"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatikus idõszinkronizáció (NTP-vel)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "NTP-kiszolgáló"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Távoli CUPS-kiszolgáló"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Nincs nyomtató"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Összefoglalás"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Egér"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Idõzóna"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Nyomtató"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDN-kártya"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Hangkártya"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV-tuner kártya"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Helyi fájlok"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Rendszergazdai (root) jelszó beállítása"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Nincs jelszó"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Ez a jelszó túl egyszerû (legalább %d karakter hosszúnak kell lennie)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Felhasználóazonosítás"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "LDAP-alapú azonosítás"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP alap-DN"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "LDAP-kiszolgáló"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "NIS-alapú azonosítás"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS-tartomány"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS-kiszolgáló"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Az indítólemez segítségével a Linux rendszer akkor is elindítható, ha a\n"
-"merevlemezrõl történõ indítás nem mûködik. Ez például akkor hasznos, ha\n"
-"nem kíván rendszerindító programot telepíteni, vagy egy másik operációs\n"
-"rendszer eltávolította a SILO-t, vagy ha a program nem tudja lekezelni a\n"
-"gép hardverét. Az indítólemez a Mandrake helyreállítólemezzel is\n"
-"használható, hogy súlyos meghibásodás esetén a rendszer állapota könnyen\n"
-"visszaállítható legyen.\n"
-"\n"
-"Ha szeretne indítólemezt készíteni, helyezzen be egy floppyt az\n"
-"elsõ meghajtóba és nyomja meg az \"OK\" gombot."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Elsõ floppy-meghajtó"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Második floppy-meghajtó"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Kihagyás"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Az indítólemez lehetõvé teszi, hogy a Linux operációs rendszert a normál\n"
-"rendszerindító program nélkül is el lehessen indítani. Ez akkor hasznos,\n"
-"ha nem kíván LILO-t (illetve GRUB-ot) telepíteni a gépre, vagy egy másik\n"
-"operációs rendszer letörli a LILO-t, vagy a LILO nem mûködik az adott\n"
-"hardver-konfigurációval. Az indítólemezt használhatja a Mandrake\n"
-"helyreállítólemezzel együtt is, így sokkal egyszerûbb a helyreállítás egy\n"
-"rendszerhiba után. Szeretne most indítólemezt készíteni a rendszerhez?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Nincs elérhetõ floppy-meghajtó"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Válassza ki azt a floppy-meghajtót, amelyet az indítólemez elkészítéséhez "
-"használni kíván"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Tegyen egy floppyt a(z) %s meghajtóba"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Indítólemez készül"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Rendszerbetöltõ elõkészítése"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"A gép típusa feltehetõen OldWorld vagy Ismeretlen,\n"
-"ezért a yaboot rendszerindító program nem fog mûködni.\n"
-"A telepítés folytatható, de az indításhoz\n"
-"a BootX-et kell majd használni."
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Szeretné az aboot-ot használni?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Hiba az aboot telepítésekor.\n"
-"Próbáljam újra a telepítést akkor is, ha ez esetleg tönkreteszi az elsõ\n"
-"partíciót?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-msgid "Installing bootloader"
-msgstr "Rendszerindító program telepítése"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "A rendszerbetöltõ telepítése nem sikerült. A hiba a következõ:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Lehet, hogy módosítani kell az Open Firmware rendszerindítási eszköz\n"
-" beállításain a rendszerindító program használatához. Ha újraindítás után\n"
-" nem jelenik meg a prompt, nyomja le a Command-Option-O-F-et induláskor\n"
-" és írja be ezt: setenv boot-device %s,\\\\:tbxi\n"
-" Majd gépelje be ezt: shut-down\n"
-"A következõ indítás után meg kell jelennie a promptnak."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Alacsony"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Közepes"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Magas"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Válassza ki a biztonsági szintet"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Tegyen egy üres floppyt a(z) %s meghajtóba"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Automatikus telepítõfloppy készítése"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"A telepítés nem teljes, mivel egyes lépések kimaradtak.\n"
-"\n"
-"Biztos, hogy ki akar lépni?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratulálunk, a telepítés sikeresen befejezõdött. Vegye ki a médiát, amirõl\n"
-"a rendszer indítása történt (CD, floppylemez, ...), és nyomjon Enter-t a\n"
-"rendszer újraindításához.\n"
-"\n"
-"Az ehhez a Mandrake Linux verzióhoz elérhetõ javításokról a\n"
-"http://www.mandrakelinux.com/ címen olvashat.\n"
-"\n"
-"A rendszer beállításával kapcsolatban a Hivatalos Mandrake Linux\n"
-"Felhasználói Kézikönyvben talál további információkat."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Automatikus telepítõfloppy készítése"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Az automatikus telepítés akár teljesen automatikus is lehet,\n"
-"ebben az esetben az egész merevlemez tartalmát módosíthatja.\n"
-"Elsõsorban akkor ajánlott, ha másik gépre is telepíteni kívánja\n"
-"a rendszert.\n"
-"\n"
-"Lehetõség van a telepítés újrajátszására is.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automatikus"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Újrajátszás"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Csomagösszeállítás mentése"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux telepítés %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"<Tab>/<Alt+Tab> lépegetés | <Szóköz> kiválasztás | <F12> következõ képernyõ "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "nincs kdesu"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "Válasszon egy fájlt"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Speciális"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Egy kis türelmet kérek"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "A fa kibontása"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "A fa összecsukása"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Váltás sima és csoportok szerint rendezett nézet között"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Nem egyértelmû választás (%s), legyen pontosabb\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Nem megfelelõ választás, próbálja meg újra\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (az alapértelmezés: %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Melyiket választja? (az alapértelmezés: %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr ""
-"Melyiket választja? (alapértelmezés: %s; írjon 'none'-t, ha egyiket sem) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "cseh (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "német"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak-féle"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "spanyol"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "finn"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "francia"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "norvég"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "lengyel"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "orosz"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "svéd"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "angol (UK) billentyûzet"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "USA-billentyûzet"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "albán"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "örmény (régi)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "örmény (írógép)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "örmény (fonetikus)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "azerbajdzsáni (latin)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "belga"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "bolgár"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "brazil (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "fehérorosz"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "svájci (német kiosztás)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "svájci (francia kiosztás)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "cseh (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "német (\"dead key\" nélkül)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "dán"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak-féle (USA)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak-féle (norvég)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "észt"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "grúz (\"orosz\" kiosztás)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "grúz (\"latin\" kiosztás)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "görög"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "magyar"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "horvát"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "izraeli"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "izraeli (fonetikus)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "iráni"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "izlandi"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "olasz"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "japán 106-billentyûs"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "koreai billentyûzet"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "latin-amerikai"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "litván AZERTY (régi)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "litván AZERTY (új)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "litván \"számsor\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "litván \"fonetikus\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-msgid "Latvian"
-msgstr "lett"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "macedón"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "holland"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "lengyel (qwerty)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "lengyel (qwertz)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "portugál"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "kanadai (Quebec)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "román (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "román (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "orosz (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "szlovén"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "szlovák (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "szlovák (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "szerb (cirill)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "thaiföldi billentyûzet"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr "tadzsik billentyûzet"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "török (hagyományos \"F\" modell)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "török (modern \"Q\" modell)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "ukrán"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "USA-billentyûzet (nemzetközi)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "vietnámi \"számsor\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "jugoszláv (latin)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Körkörös csatlakoztatás - %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Elõször törölje az összes logikai kötetet\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun egér"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Szabványos"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Általános PS/2-es görgõs egér"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 gombos"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Általános"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Görgõs"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "Soros"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Általános 2 gombos egér"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Általános 3 gombos egér"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (soros, régi C7 típus)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 gombos"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 gombos"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "egyik sem"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "nincs egér"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Az egér letesztelése"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Az egér aktiválásához "
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOZGASSA AZ EGÉRGÖRGÕT!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Befejezés"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Következõ ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Elõzõ"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Elfogadja?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Csatlakozás az internethez"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Az ADSL-en keresztüli csatlakozás legtöbbször PPPOE-vel történik,\n"
-"de elõfordul a PPTP és a DHCP is.\n"
-"A PPPOE-t válassza, ha nem biztos a válaszban."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speed Touch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "DHCP használata"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "PPPOE használata"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "PPTP használata"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Melyik DHCP-klienst szeretné használni?\n"
-"Az alapértelmezés: dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nem található Ethernet hálózati kártya a rendszerben.\n"
-"Nem tudom beállítani ezt a kapcsolattípust."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Hálózati csatoló kiválasztása"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Válassza ki, hogy melyik hálózati adapteren keresztül szeretne csatlakozni "
-"az internetre."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nem találtam hálózati kártyát"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Hálózat beállítása"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Most adja meg a gép nevét (ha ismeri).\n"
-"Néhány DHCP-kiszolgáló csak a gépnév megadása után használható.\n"
-"A teljes nevet kell beírni, például: \"gep.vallalat.hu\"."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Gépnév"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Hálózatbeállító varázsló"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Külsõ ISDN-modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Belsõ ISDN-kártya"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Milyen típusú az ISDN-kapcsolat?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Milyen típusú ISDN-beállításokat szeretne használni?\n"
-"\n"
-"  - A régi típusú beállítás az isdn4net-re épül. Ez igen hatékony\n"
-"    eszközöket tartalmaz, de beállítása nehézkes, és nem szabványos.\n"
-"\n"
-"  - Az új típusú beállítás könnyen átlátható, szabványos,\n"
-"    de kevesebb segédeszköz tartozik hozzá.\n"
-"\n"
-"Ha nincs kizáró ok, akkor inkább az utóbbit válassza.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Új beállítás (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Régi beállítás (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN-beállítások"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Adja meg a szolgáltatója nevét.\n"
-"Ha az nincs benne a listában, válassza az \"Unlisted\"-et"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "Európai protokoll"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "Európa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "A világ többi része"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokoll a világ többi részén \n"
-" D csatorna nélkül (bérelt vonal)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Melyik protokollt szeretné használni?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Milyen típusú kártyával rendelkezik?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Nem tudom"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Amennyiben ISA kártyája van, a következõ képernyõn látható értékek\n"
-"beállítása lényeges.\n"
-"\n"
-"Ha PCMCIA kártyája van, tudnia kell a kártya IRQ és IO értékeit.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Megszakítás"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Folytatás"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Milyen ISDN-kártyája van?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Érzékeltem egy ISDN PCI kártyát, de nem ismertem fel a típusát. Kérem, "
-"válasszon ki egy PCI kártyát a következõ képernyõn."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nem találtam ISDN PCI kártyát. Válasszon ki egyet a következõ képernyõn."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Válassza ki, hogy melyik soros portra csatlakozik a modeme."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Modemes csatlakozás beállításai"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Csatlakozás neve"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Telefonszám"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Felhasználónév"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Szkript-alapú"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Terminál-alapú"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Tartománynév"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Elsõdleges DNS-kiszolgáló (nem kötelezõ)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Másodlagos DNS-kiszolgáló (nem kötelezõ)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Bonthatja a kapcsolatot vagy újra elvégezheti a beállításokat."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"A kapcsolat újból beállítható."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Jelenleg csatlakozva van az internethez."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Csatlakozás az internethez vagy a kapcsolat újbóli beállítása."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Jelenleg nincs csatlakozva az internethez."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Csatlakozás az internethez"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Az internetkapcsolat bontása"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "A hálózati kapcsolat beállítása (helyi hálózat vagy internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Az internetkapcsolat beállítása"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "A(z) %s kapcsolat beállítása következik."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"A(z) %s kapcsolat beállítása következik.\n"
-"\n"
-"\n"
-"A továbblépéshez nyomja meg az OK gombot."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Hálózatbeállítás"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Mivel a hálózaton keresztül telepít, a hálózat beállítása már megtörtént.\n"
-"Kattintson az OK gombra a beállítások megtartásához, vagy a Mégsem gombra\n"
-"a hálózat és az internetkapcsolat újbóli beállításához.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Üdvözöljük a hálózatbeállító varázslóban!\n"
-"\n"
-"A hálózat és az internetkapcsolat beállítása következik.\n"
-"Törölje a kijelölést az opció mellõl, ha nem kér automatikus felismerést.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Adja meg a beállítani kívánt profil nevét"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Automatikus detektálás"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Eszközök keresése..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Normál modemes kapcsolat"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "detektálva ezen a porton: %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN-kapcsolat"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "detektálva: %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ADSL-kapcsolat"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "detektálva a(z) %s csatlakozón"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Kábeles kapcsolat"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "kábeles kapcsolat detektálva"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "Helyi hálózatos kapcsolat"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "Ethernet-kártya/kártyák detektálva"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Válassza ki a beállítani kívánt eszközt"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Egynél több internetkapcsolatot hozott létre.\n"
-"Válassza ki azt, amelyiket használni szeretné.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Internetkapcsolat"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Jöjjön létre a kapcsolat a rendszer indulásakor?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Hálózatbeállítás"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr "A hálózatkezelést újra kell indítani"
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Hiba történt a hálózatkezelés újraindításakor: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Gratulálunk! A hálózat és az internet-hozzáférés beállítása befejezõdött.\n"
-"\n"
-"Most érvényesítem az új beállításokat.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Annak elvégzése után érdemes újraindítani az X környezetet,\n"
-"hogy a gépnév módosításából eredõ problémák elkerülhetõk legyenek."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"Figyelem! Ez az eszköz már be lett állítva internet-hozzáféréshez.\n"
-"Elég elfogadni a már meglévõ beállításokat.\n"
-"A lenti mezõk módosításával felül lehet bírálni a beállításokat."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Kérem, adja meg a gép IP-beállításait.\n"
-"Minden mezõbe IP-címet írjon pontozott decimális formátumban\n"
-"(pl.: 192.169.10.11)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "A(z) %s hálózati eszköz beállítása"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (meghajtó - %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP-cím"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Hálózati maszk"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(BOOTP/DHCP)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Automatikus IP-cím"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Az IP-cím formátuma 1.2.3.4 legyen"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Adja meg a gépe nevét.\n"
-"A teljes nevet kell beírni, például: \"mybox.mylab.myco.com\".\n"
-"Megadhatja az átjáró (gateway) IP-címét is, ha van olyan."
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS-kiszolgáló"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Átjáró (gateway)"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Átjáró-eszköz"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Proxy-beállítások"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP-proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP-proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr "A hálózati kártya azonosítójának követése (laptopoknál hasznos)"
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "A proxy valami ilyen kell, hogy legyen: http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "A proxy valami ilyen kell, hogy legyen: ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Internet-beállítások"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Kipróbáljuk az internetkapcsolatot most?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "A kapcsolat ellenõrzése..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "A rendszer internetes kapcsolata él."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Biztonsági okokból lebontom a kapcsolatot."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Az internetkapcsolat feltehetõen nem aktív.\n"
-"Próbálja meg újból elvégezni a beállítást."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "A kapcsolat beállítása"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Töltse ki vagy ellenõrizze az alábbi mezõket"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "Kártya IRQ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Kártya DMA"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "Kártya IO"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "Kártya IO_0"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "Kártya IO_1"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Az Ön saját telefonszáma"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "A szolgáltató neve (pl. provider.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "A szolgáltató telefonszáma"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "Elsõdleges DNS-kiszolgáló (nem kötelezõ)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "Másodlagos DNS-kiszolgáló (nem kötelezõ)"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "Válassza ki az országot"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Tárcsázási mód"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Csatlakozási sebesség"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "A csatlakozás várakozási ideje (másodpercben)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Felhasználónév"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Jelszó"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "A kiterjesztett (extended) partíció nem támogatott ezen a platformon"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"A partíciós táblában van egy üres tartomány, de nem tudom használni.\n"
-"Az egyetlen megoldás az elsõdleges partíció áthelyezése úgy, hogy\n"
-"a kiterjesztett partíciók mellé kerüljön az üres hely."
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "A(z) %s fájlból való visszaállítás sikertelen: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Hibás mentésfájl"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Hiba a(z) %s fájl írása közben"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Valamilyen probléma van a meghajtóval. \n"
-"Az adatintegritási teszt végrehajtása nem sikerült. \n"
-"Ez azt jelenti, hogy a lemezre való írás tönkreteheti a meghajtó \n"
-"adattartalmát."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "nagyon fontos"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "fontos"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "erõsen ajánlott"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "ajánlott"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "opcionális"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Helyi nyomtató"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Távoli nyomtató"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "Távoli CUPS-nyomtató"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "Távoli lpd-nyomtató"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Hálózati nyomtató (socket-alapú)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT-nyomtató"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "NetWare-nyomtató"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "A nyomtatóeszköz URI-ja"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "A feladat kimenetének átirányítása egy parancsba"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "Ismeretlen modell"
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr "\"Nyers\" nyomtató (nincs meghajtóprogram)"
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(itt: %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "(ezen a gépen)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Válassza ki a nyomtató csatlakozásának típusát"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hogyan van a nyomtató csatlakoztatva?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"A távoli CUPS-nyomtatókat nem kell beállítani, azokat\n"
-"a program automatikusan felismeri. Ha nem tudja biztosan,\n"
-"mit kell beírni, válassza a \"Távoli CUPS-nyomtató\"-t."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Egyik sem"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-msgid "Choose a default printer!"
-msgstr "Adja meg az alapértelmezett nyomtatót."
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-"Távoli CUPS kiszolgálók esetén Önnek itt nem szükséges beállítania\n"
-"semmiféle nyomtatót; a CUPS kiszolgálók automatikusan informálják\n"
-"az Ön gépét a rajtuk keresztül elérhetõ nyomtatókról. Az Ön gépe\n"
-"által ismert nyomtatók listája \"Az alapértelmezett nyomtató\"\n"
-"mezõben látható. Válassza ki az alapértelmezés szerinti nyomtatót,\n"
-"majd kattintson az \"Alkalmazás/a nyomtatók újraolvasása\" gombra.\n"
-"A lista frissítéséhez kattintson ugyanezen gombra (a CUPS\n"
-"elindulása után akár 30 másodpercet is igénybe vehet a távoli\n"
-"nyomtatók listájának lekérdezése).\n"
-"Ha a CUPS kiszolgáló egy másik hálózaton van, akkor meg kell adni\n"
-"a CUPS kiszolgáló IP-címét és - opcionálisan - a portszámot\n"
-"ahhoz, hogy a kiszolgálótól le lehessen kérdezni a\n"
-"nyomtatóinformációkat. Máskülönben hagyja üresen ezen mezõket."
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"A CUPS beállítása általában automatikusan megtörténik a hálózat\n"
-"jellemzõinek megfelelõen, hogy a helyi hálózaton található CUPS-nyomtatók\n"
-"használhatók legyenek. Ha a beállítás nem megfelelõ, akkor\n"
-"kapcsolja ki az \"Automatikus CUPS-beállítás\" opciót és módosítsa\n"
-"kézzel az /etc/cups/cupsd.conf fájlt. Ne felejtse ezután újraindítani a\n"
-"CUPS szolgáltatást (például a \"service cups restart\" paranccsal)."
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Bezárás"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "Alkalmazás/a nyomtatók újraolvasása"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Az IP-cím formátuma 192.168.1.20 legyen"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "A portnak egész számnak kell lennie!"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "Az alapértelmezett nyomtató"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "CUPS-kiszolgáló IP-címe"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr "Automatikus CUPS-beállítás"
-
-#: ../../printerdrake.pm_.c:217
-msgid "Detecting devices ..."
-msgstr "Eszközök keresése..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "A portok ellenõrzése"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "\"%s\" típusú nyomtatót találtam: "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Helyi nyomtatóeszköz"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Melyik eszközre van a nyomtató csatlakoztatva\n"
-"(megjegyzés: /dev/lp0 megfelel az LPT1:-nek)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Nyomtatóeszköz"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "Az eszköz/fájlnév hiányzik."
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-msgid "Reading printer database ..."
-msgstr "A nyomtató-adatbázis beolvasása..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Távoli lpd nyomtató beállításai"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Távoli lpd nyomtató használatához meg kell adni a\n"
-"nyomtatókiszolgáló nevét és a nyomtató nevét."
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "A távoli gép neve"
-
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "A távoli nyomtató neve"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "A távoli gép neve nem lehet üres!"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "A távoli nyomtató neve nem lehet üres!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) nyomtatási beállítások"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Ahhoz, hogy SMB-nyomtatóra tudjon nyomtatni, meg kell adnia a nyomtató-\n"
-"kiszolgáló SMB-nevét (nem biztos, hogy ugyanaz, mint a TCP/IP-gépnév!)\n"
-"és IP-címét, a megosztott nyomtató nevét és egy megfelelõ jogosultságokkal\n"
-"rendelkezõ felhasználó nevét, jelszavát és munkacsoportját."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "Az SMB-kiszolgáló neve"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "Az SMB-kiszolgáló IP-címe"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Megosztásnév"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Munkacsoport"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "A kiszolgáló nevét vagy IP-címét meg kell adni!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "A Samba megosztásnév üres!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "NetWare nyomtatóbeállítások"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Ahhoz, hogy NetWare nyomtatóra tudjon nyomtatni, meg kell adnia a NetWare\n"
-"nyomtató-kiszolgáló nevét (ez nem biztos, hogy megegyezik a TCP/IP\n"
-"gépnévvel!), a nyomtatási sor nevét, és egy megfelelõ jogosultságokkal\n"
-"rendelkezõ felhasználói nevet és jelszót."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Nyomtatókiszolgáló"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "A nyomtatási sor neve"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "Az NCP-kiszolgáló neve üres!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "Az NCP-sor neve üres!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Socket-alapú nyomtatási beállítások"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Ahhoz, hogy egy socket-alapú nyomtatóra nyomtathasson, meg kell adnia a\n"
-"nyomtatóhoz tartozó gépnevet és opcionálisan a nyomtató portszámát.\n"
-"HP JetDirect kiszolgálókon a port száma általában 9100; más\n"
-"kiszolgálókon ez más érték lehet. A hardver kézikönyvében valószínûleg\n"
-"talál további információt."
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "A nyomtató gépneve"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "A nyomtató gépneve üres!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "A nyomtatóeszköz URI-ja"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Közvetlenül megadható a nyomtató elérési URI-ja. Az URI-nak meg kell "
-"felelnie a CUPS vagy a Foomatic elõírásainak. Nem minden URI-típust támogat "
-"minden sorkezelõ."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "Érvényes URI-t kell megadni."
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Minden nyomtatóhoz meg kell adni egy nevet (például: lp).\n"
-"A Leírás és Hely mezõket nem kötelezõ\n"
-"kitölteni, csak tájékoztatási célt szolgálnak."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "A nyomtató neve"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Leírás"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Hely"
-
-#: ../../printerdrake.pm_.c:701
-msgid "Preparing printer database ..."
-msgstr "A nyomtató-adatbázis elõkészítése..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "A nyomtató típusának kiválasztása"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "Milyen típusú a nyomtató?"
-
-#: ../../printerdrake.pm_.c:866
-msgid "OKI winprinter configuration"
-msgstr "OKI windowsos nyomtató beállítása"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-"Ön egy OKI windowsos lézernyomtató beállítását végzi. Ezek a\n"
-"nyomtatók egy speciális kommunikációs protokollt használnak,\n"
-"ami miatt csak akkor képesek mûködni, ha az elsõ párhuzamos\n"
-"portra vannak csatlakoztatva. Ha az Ön nyomtatója egy másik\n"
-"portra vagy egy nyomtatókiszolgálóhoz csatlakozik, akkor\n"
-"tegye azt át az elsõ párhuzamos portra, még mielõtt tesztoldalt\n"
-"nyomtatna - máskülönben a nyomtató nem fog mûködni.\n"
-"A kapcsolattípus-beállítást a meghajtóprogram figyelmen kívül\n"
-"hagyja."
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark tintasugaras nyomtató beállítása"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-"A Lexmark által biztosított tintasugarasnyomtató-meghajtóprogramok\n"
-"csak helyi nyomtatókat támogatnak, tehát távoli gépen vagy\n"
-"nyomtatókiszolgálón levõket nem. Csatlakoztassa a nyomtatót egy\n"
-"helyi portra, vagy állítsa azt be azon a gépen, amelyhez az\n"
-"csatlakoztatva van."
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-"Ahhoz, hogy nyomtatni tudjon a Lexmark tintasugaras\n"
-"nyomtatóval ezen a gépen, szüksége lesz a Lexmark\n"
-"(http://www.lexmark.com/) által biztosított megfelelõ\n"
-"meghajtóprogramokra. Látogasson el az USA-beli honlapra,\n"
-"és kattintson a \"Drivers\" (meghajtóprogramok) gombra.\n"
-"Ezután válassza ki a megfelelõ nyomtatótípust, majd\n"
-"operációs rendszerként a \"Linux\"-t. A meghajtóprogramok\n"
-"RPM csomagok illetve interaktív grafikus telepítést\n"
-"lehetõvé tevõ szkriptek formájában érhetõk el. Nem\n"
-"szükséges a grafikus felületen végezni a beállítást.\n"
-"Lépjen ki a licencegyezmény után. Ezután nyomtasson\n"
-"nyomtatófej-igazítási oldalakat \"lexmarkmaintain\"-nel,\n"
-"és szükség esetén módosítsa a fej-igazítási beállításokat\n"
-"ezzel a programmal."
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"A nyomtató alapértelmezései\n"
-"Ellenõrizze, hogy a papírméret és a tinta típusa\n"
-"(ha van) helyesen van-e beállítva. Ha a nyomtatási\n"
-"minõséget nagyon magasra állítja, akkor a nyomtatási\n"
-"idõ jelentõsen megnõhet."
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "A(z) %s értéknek egész számnak kell lennie!"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "A(z) %s értéknek számnak kell lennie!"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "A(z) %s érték nem esik a megfelelõ tartományba!"
-
-#: ../../printerdrake.pm_.c:1136
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Be szeretné állítani a(z) \"%s\"\n"
-"nyomtatót alapértelmezettnek?"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "Tesztoldalak"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"Válassza ki a kinyomtatni kívánt tesztoldalakat.\n"
-"Megjegyzés: a fényképes tesztoldal kinyomtatása sokáig eltarthat,\n"
-"sõt egyes, kevés memóriával ellátott lézernyomtatókon el sem fog készülni.\n"
-"Általában elég a normál tesztoldalt kinyomtatni."
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "Nem kell tesztoldal"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "Nyomtatás"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "Normál tesztoldal"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr "Más tesztoldal (Letter)"
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr "Más tesztoldal (A4)"
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "Fényképes tesztoldal"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "A tesztoldal(ak) nyomtatása folyik..."
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"A tesztoldal(aka)t elküldtem a nyomtatóra.\n"
-"Eltarthat egy ideig, amíg a nyomtatás elindul.\n"
-"Nyomtatási állapot:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"A tesztoldal(aka)t elküldtem a nyomtatóra.\n"
-"Eltarthat egy ideig, amíg a nyomtatás elindul.\n"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "Sikerült a nyomtatás?"
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-msgid "Raw printer"
-msgstr "\"Nyers\" nyomtató"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Egy fájl parancssorból (terminálablakból) való nyomtatásához használhatja a "
-"következõ parancsot: \"%s <fájl>\" vagy egy grafikus felületû "
-"nyomtatóeszközt: \"xpp <fájl>\" illetve \"qtcups <fájl>\". A grafikus "
-"eszközök lehetõvé teszik a nyomtató kijelölését és a beállítások egyszerû "
-"módosítását.\n"
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ezeket a parancsokat használhatja számos alkalmazás nyomtatási "
-"párbeszédablakában is (a nyomtatási parancsot megadó mezõben), de ott ne "
-"adjon meg fájlnevet, mert a fájlt az alkalmazás fogja biztosítani.\n"
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"A(z) \"%s\" parancs szintén lehetõvé teszi a beállítások módosítását egy "
-"bizonyos nyomtatási feladatra vonatkozóan. Egyszerûen adja hozzá a kívánt "
-"paramétereket a parancshoz, például: \"%s <fájl>\". "
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-"Ha szeretne egy listát az aktuális nyomtatóhoz használható opciókról, akkor "
-"olvassa el a lentebbi listát, vagy kattintson a \"Nyomtatási beállítások "
-"listája\" gombra.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Egy fájl parancssorból (terminálablakból) való nyomtatásához használja a "
-"következõ parancsot: \"%s <fájl>\".\n"
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ezt a parancsot használhatja számos alkalmazás nyomtatási párbeszédablakában "
-"is (a nyomtatási parancsot megadó mezõben), de ott ne adjon meg fájlnevet, "
-"mert a fájlt az alkalmazás fogja biztosítani.\n"
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-"Ha szeretne egy listát az aktuális nyomtatóhoz használható opciókról, akkor "
-"kattintson a \"Nyomtatási beállítások listája\" gombra.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Egy fájl parancssorból (terminálablakból) való nyomtatásához használja a "
-"következõ parancsot: \"%s <fájl>\" vagy ezt: \"%s <fájl>\".\n"
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Az opciók beállításához és a nyomtatási feladatok kezeléséhez használhatja "
-"az \"xpdq\" grafikus felületet is.\n"
-"Ha munkaasztali környezetként a KDE-t használja, akkor rendelkezésére áll "
-"egy \"pánikgomb\" - egy \"Nyomtató leállítása\" feliratú ikon a "
-"munkaasztalon, amellyel azonnali jelleggel leállítható az összes nyomtatási "
-"feladat. Ez például papírberagadás esetén hasznos.\n"
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"A(z) \"%s\" és a(z) \"%s\" parancs lehetõvé teszi egy adott nyomtatási "
-"feladat beállításainak módosítását is. Adja hozzá a kívánt beállításokat a "
-"parancshoz, például: \"%s <fájl>\".\n"
-
-#: ../../printerdrake.pm_.c:1292
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Nyomtatás a(z) \"%s\" nyomtatóra"
-
-#: ../../printerdrake.pm_.c:1294
-msgid "Print option list"
-msgstr "Nyomtatási beállítások listája"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "A nyomtató adatainak beolvasása..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "A nyomtatóbeállítások átvitele"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-"A(z) %s sorkezelõ nyomtatóbeállításai átmásolhatók a(z)\n"
-"%s sorkezelõ (amely az aktuális sorkezelõ) számára. Az\n"
-"összes beállítás (nyomtatónév, leírás, hely, kapcsolódási\n"
-"típus illetve alapértelmezett beállítások) át lesz véve,\n"
-"de a nyomtatási feladatok nem kerülnek át.\n"
-"A következõ okok miatt nem minden nyomtatási sor vihetõ át:\n"
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-"A CUPS nem támogatja a Novell-alapú és a\n"
-"kötetlen parancsformátumú nyomtatókat.\n"
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-"A PDQ csak a helyi nyomtatókat valamint a távoli LPD- és\n"
-"Socket/TCP-alapú nyomtatókat támogatja.\n"
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "Az LPD és az LPRng nem támogatja az IPP-nyomtatókat.\n"
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-"Nem vihetõk át azon nyomtatási sorok, amelyek nem ezzel\n"
-"a programmal és nem a \"foomatic-configure\"-rel készültek."
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-"\n"
-"Továbbá a gyártó által adott PPD fájllal beállítható\n"
-"nyomtatók és a közvetlen CUPS-meghajtóval ellátott nyomtatók\n"
-"beállításai nem vihetõk át."
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Jelölje ki az átviendõ nyomtatókat, majd kattintson az \n"
-"\"Átvitel\" gombra."
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "Az átvitel kihagyása"
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "Átvitel"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"A(z) \"%s\" nevû nyomtató már létezik itt: %s. \n"
-"Kattintson az \"Átvitel\" gombra annak felülírásához.\n"
-"Esetleg adjon meg egy másik nevet vagy hagyja ki a nyomtatót."
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"A nyomtató nevében csak angol betû, számjegy és az aláhúzás szerepelhet."
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"\"%s\" nevû nyomtató már létezik,\n"
-"felül szeretné írni annak beállításait?"
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "Új nyomtatónév"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "%s átvitele..."
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-"A korábbi alapértelmezett nyomtató (\"%s\") beállításait\n"
-"vitte át. Az új %s nyomtatási rendszerben is ez legyen\n"
-"az alapértelmezett nyomtató?"
-
-#: ../../printerdrake.pm_.c:1423
-msgid "Refreshing printer data ..."
-msgstr "A nyomtató adatainak frissítése..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr "Távoli nyomtató beállítása"
-
-#: ../../printerdrake.pm_.c:1432
-msgid "Starting network ..."
-msgstr "A hálózat elindítása..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-msgid "Configure the network now"
-msgstr "Hálózat beállítása most"
-
-#: ../../printerdrake.pm_.c:1455
-msgid "Network functionality not configured"
-msgstr "Hálózati funkciók nincsenek beállítva"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-"Egy távoli nyomtató beállítása következik. Ehhez mûködõ hálózati\n"
-"hozzáférés szükséges, viszont az Ön hálózata még nincsen beállítva.\n"
-"Ha továbblép a hálózat beállítása nélkül, akkor nem lesz lehetõsége\n"
-"a most beállítandó nyomtató használatára. Mit szeretne tenni?"
-
-#: ../../printerdrake.pm_.c:1463
-msgid "Go on without configuring the network"
-msgstr "Folytatás a hálózat beállítása nélkül"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-"A telepítés közben végezhetõ hálózatbeállítás nem indítható\n"
-"el. A gép újraindítása után vizsgálja meg, hogy a hálózat\n"
-"elérhetõ-e, és javítsa ki a beállításokat a Mandrake\n"
-"Vezérlõközpont \"Hálózat és internet\"/\"Kapcsolat\"\n"
-"részében, azután állítsa be a nyomtatót a Mandrake\n"
-"Vezérlõközpont \"Hardver\"/\"Nyomtató\" részében."
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-"A hálózati hozzáférés nem volt elindítva, és az\n"
-"elindítása sem lehetséges. Ellenõrizze a beállításokat\n"
-"és a hardvert, majd próbálkozzon újra a távoli nyomtató\n"
-"beállításával."
-
-#: ../../printerdrake.pm_.c:1516
-msgid "Restarting printing system ..."
-msgstr "A nyomtatási rendszer újraindítása..."
-
-#: ../../printerdrake.pm_.c:1548
-msgid "high"
-msgstr "magas"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "paranoid"
-msgstr "paranoiás"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Nyomtatórendszer telepítése a következõ biztonsági szinten: %s"
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-"Most a(z) %s nyomtatási rendszer telepítése következik egy\n"
-"\"%s\" biztonsági szinten mûködõ gépre.\n"
-"\n"
-"Ez a nyomtatási rendszer egy szolgáltatást (háttérfolyamatot)\n"
-"futtat, amely nyomtatási feladatokra vár és kezeli azokat.\n"
-"Ez a szolgáltatás elérhetõ távoli gépekrõl is a hálózaton\n"
-"keresztül, ezért támadási felületet nyújthat. Emiatt\n"
-"alapértelmezésben csak néhány kiválasztott szolgáltatás kerül\n"
-"elindításra ezen a biztonsági szinten.\n"
-"\n"
-"Biztos abban, hogy be szeretne állítani nyomtatást ezen a gépen?"
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Starting the printing system at boot time"
-msgstr "A nyomtatási rendszer elindítása a rendszer indulásakor"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-"A nyomtatási rendszer (%s) nem kerül automatikus elindításra\n"
-"a gép indulásakor.\n"
-"\n"
-"Elképzelhetõ, hogy az automatikus indítás ki lett kapcsolva\n"
-"egy magasabb biztonsági szintre való váltással, mivel a\n"
-"nyomtatási rendszer támadási felületet nyújthat.\n"
-"\n"
-"Szeretné a nyomtatási rendszer automatikus indítását ismét\n"
-"bekapcsolni?"
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "A telepített szoftverek ellenõrzése..."
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "Az LPRng eltávolítása..."
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "Az LPD eltávolítása..."
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Válassza ki a nyomtatási rendszert"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Melyik nyomtatási rendszert (sorkezelõt) szeretné használni?"
-
-#: ../../printerdrake.pm_.c:1759
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "A(z) \"%s\" nyomtató beállítása..."
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Nyomtatóbeállítások"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr "A PrinterDrake elõkészítése..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "Szeretné beállítani a nyomtatókezelést?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr "Nyomtatási rendszer: "
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-"A következõ nyomtatók vannak beállítva.\n"
-"Módosításhoz illetve információszerzéshez\n"
-"kattintson a megfelelõre; új nyomtató\n"
-"felvételéhez pedig a \"Nyomtató hozzáadása\"\n"
-"gombra."
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Normál mód"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (alapértelmezés)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "A távoli CUPS-kiszolgáló(ko)n található nyomtató(k)"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-msgid "Printer(s) on remote server(s)"
-msgstr "A távoli kiszolgáló(ko)n található nyomtató(k)"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Nyomtató hozzáadása"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-msgid "Do you want to configure another printer?"
-msgstr "Szeretne beállítani egy másik nyomtatót?"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "A nyomtatóbeállítás módosítása"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"%s nyomtató: %s %s\n"
-"Mit szeretne megváltoztatni ennél a nyomtatónál?"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "Mehet!"
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "A nyomtató kapcsolódási típusa"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "Nyomtatónév, leírás, hely"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "A nyomtató gyártója, típusa, meghajtóprogramja"
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "A nyomtató gyártója, típusa"
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr "Legyen ez a nyomtató az alapértelmezett"
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "Tesztoldalak nyomtatása"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr "Hogyan kell nyomtatni ezen a nyomtatón"
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "Nyomtató eltávolítása"
-
-#: ../../printerdrake.pm_.c:2071
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "A régi \"%s\" nyomtató eltávolítása..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "A(z) \"%s\" nyomtató lesz ezután az alapértelmezett nyomtató."
-
-#: ../../printerdrake.pm_.c:2103
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Biztosan el szeretné távolítani a(z) \"%s\" nyomtatót?"
-
-#: ../../printerdrake.pm_.c:2105
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "A(z) \"%s\" nyomtató eltávolítása..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy-beállítások"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Üdvözöljük a proxy-beállító segédprogramban!\n"
-"\n"
-"Itt lehet megadni a HTTP- és FTP-proxy adatait,\n"
-"a bejelentkezési információval együtt\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Adja meg a HTTP-proxy adatait.\n"
-"Hagyja üresen, ha nem kíván HTTP-proxyt használni."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Az URL-nek így kell kezdõdnie: \"http:\""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "A portnak számnak kell lennie"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Adja meg az FTP-proxy adatait.\n"
-"Hagyja üresen, ha nem kíván FTP-proxyt használni."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Az URL-nek így kell kezdõdnie: \"ftp:\""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Adja meg a proxy használatához szükséges nevet és jelszót.\n"
-"Hagyja üresen, ha erre nincs szükség."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "felhasználónév"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "jelszó"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "a jelszó még egyszer"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "A jelszavak nem egyeznek meg, adja meg õket még egyszer!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nem tudok partíciót hozzáadni a _formázott_ RAID md%d bejegyzéshez"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Nem tudom írni a(z) %s fájlt"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid sikertelen"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "Az mkraid végrehajtása nem sikerült (talán hiányzik a raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nincs elég partíció a RAID %d szinthez\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Az ALSA (Advanced Linux Sound Architecture) hangrendszer elindítása"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, a parancsidõzítõ."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Az apmd monitorozza a telepek állapotát és naplóz a syslog-ba.\n"
-"Segítségével leállítható a gép, mielõtt a telep lemerül."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Az \"at\" parancs által ütemezett utasításokat hajtja végre a megadott\n"
-"idõpontban, valamint kötegelt (batch-elt) parancsokat futtat, amikor\n"
-"a gép terhelése alacsony."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"A cron a szabványos parancsütemezõ program a UNIX operációs rendszereken.\n"
-"Segítségével programokat lehet futtatni megadott idõpontokban. A vixie cron\n"
-"az alap cron-nál fejlettebb; biztonságosabb és több beállítási lehetõséggel\n"
-"rendelkezik annál."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"A GPM egértámogatást biztosít a szöveg-alapú (konzolos) linuxos\n"
-"alkalmazások (mint például a Midnight Commander) számára. Lehetõséget\n"
-"nyújt egérrel való másolásra illetve beillesztésre, valamint\n"
-"felbukkanó menük használatára (konzolon)."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"A HardDrake a gép hardverének ellenõrzésére szolgál. Lehetõvé teszi az új\n"
-"vagy megváltozott hardver megfelelõ beállítását."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Az Apache egy WWW szerver. HTML fájlokat és CGI-t tesz elérhetõvé\n"
-"a hálózaton keresztül."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Az \"internet szuperszerver szolgáltatás\" (inetd) felelõs sok hálózati\n"
-"szolgáltatás indításáért, mint például telnet, ftp, rsh és rlogin. Az inetd\n"
-"leállításával minden általa irányított szolgáltatás leáll."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"A csomagszûrés bekapcsolása a Linux kernel 2.2-es változatához.\n"
-"Lehetõvé teszi tûzfal beállítását, hogy a hálózat felõli támadások\n"
-"kivédhetõk legyenek."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ez a csomag tölti be a billentyûzetkiosztást, ami a\n"
-"/etc/sysconfig/keyboard -ban állítható be. A beállítás megváltoztatható\n"
-"a kbdconfig programmal. Ezt bekapcsolva kell hagyni a legtöbb rendszeren."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"A kernel fejlécének automatikus újragenerálása a /boot-ban a\n"
-"/usr/include/linux/{autoconf,version}.h alapján"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"A hardvereszközök automatikus felismerése és beállítása a rendszer "
-"indulásakor."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"A Linuxconf elvégez bizonyos feladatokat a rendszer indításakor,\n"
-"hogy a beállítások konzisztensek maradjanak."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Az lpd nyomtatószolgáltatás szükséges az lpr rendes mûködéséhez. Az lpd\n"
-"alapjában véve egy nyomtatószerver, elrendezi a nyomtatásokat a különbözõ\n"
-"nyomtatók között."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, nagyteljesítményû, nagy rendelkezésre állású\n"
-"kiszolgáló kialakításához használható."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"A named (BIND) egy DNS, azaz tartománynév-kiszolgáló, ennek segítségével\n"
-"feleltetik meg a gépek az IP-címeket és a gépneveket."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Fel- illetve lecsatolja (mount-olja illetve unmount-olja) a különbözõ\n"
-"hálózati fájlrendszereket, mint például az NFS, az SMB\n"
-"(LAN Manager/Windows) és az NCP (NetWare)."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiválja vagy deaktiválja a rendszerindításnál automatikusan induló\n"
-"hálózati csatolókat."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"Az NFS egy népszerû, TCP/IP hálózaton használatos fájlmegosztási protokoll.\n"
-"Ez a szolgáltatás egy NFS-kiszolgáló, konfigurálása a /etc/exports\n"
-"fájlon át történik."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"Az NFS egy népszerû, TCP/IP hálózaton használatos fájlmegosztási protokoll.\n"
-"Ez a szolgáltatás az NFS lock-olást oldja meg."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"A NumLock automatikus bekapcsolása indításkor a konzolon és az\n"
-"XFree-ben."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Az OKI 4w és az azzal kompatibilis windowsos nyomtatók támogatása."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"A PCMCIA-támogatásra általában azoknak a laptop-felhasználóknak van\n"
-"szükségük, akik PCMCIA modemet vagy hálózati kártyát használnak a gépükben.\n"
-"A szolgáltatás nem indul el, ha nincs beállítva, tehát nyugodtan fel lehet\n"
-"telepíteni olyan gépre is, ahol nincs rá szükség."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"A portmapper kezeli az RPC kapcsolatokat, ezekre többek között a NIS-nek és\n"
-"az NFS-nek van szüksége. A portmap szerverre csak a (NIS vagy NFS) szerver\n"
-"gépeken van szükség."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"A Postfix egy levéltovábbító (MTA) program, amely a leveleket továbbítja\n"
-"a különbözõ gépek között."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Elmenti és visszaállítja a rendszer entrópia-tárolóját, így jobb\n"
-"véletlenszámokat lehet generálni."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Közvetlen elérésû (raw) eszközök blokkeszközökhöz való rendelése (például\n"
-"merevlemezes partíciókhoz), hogy az alkalmazásokból (pl. Oracle)\n"
-"hozzáférhetõk legyenek."
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"A routed szolgáltatás lehetõvé teszi, hogy a RIP protokoll segítségével\n"
-"automatikusan frissüljön az IP protokoll által használt útválasztó tábla\n"
-"(IP routing table).\n"
-"A RIP elterjedt a kis hálózatokon; a nagyobb, bonyolultabb hálózatok más\n"
-"útválasztó protokollokat igényelnek."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Az rstat protokoll segítségével a felhasználók információt kaphatnak a\n"
-"(lokális) hálózaton mûködõ gépekrõl."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Az rusers protokoll segítségével a felhasználók lekérdezhetik, hogy melyik\n"
-"gépre ki van bejelentkezve."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Az rwho protokoll segítségével távoli felhasználók kaphatnak egy listát\n"
-"az rwho szolgáltatást futtató gép aktuális felhasználóiról (olyan, mint a\n"
-"finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "A gép hangrendszerének elindítása"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"A syslog-on keresztül naplóznak a szolgáltatások különbözõ naplófájlokba.\n"
-"A syslog használata mindig ajánlott."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Az USB-eszközök meghajtóinak betöltése."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Elindítja az X betûtípus-kiszolgálóját (erre szükség van az XFree "
-"használatához)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Válassza ki, mely szolgáltatások induljanak el rendszerindításkor"
-
-#: ../../services.pm_.c:126
-msgid "Printing"
-msgstr "Nyomtatás"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr "Fájlmegosztás"
-
-#: ../../services.pm_.c:132
-msgid "System"
-msgstr "Rendszer"
-
-#: ../../services.pm_.c:137
-msgid "Remote Administration"
-msgstr "Távoli adminisztráció"
-
-#: ../../services.pm_.c:145
-msgid "Database Server"
-msgstr "Adatbázis-kiszolgáló"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Szolgáltatások: %d aktivált, %d regisztrált"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Szolgáltatások"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "fut"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "leállítva"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Szolgáltatások és démonok"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Nem érhetõ el további információ\n"
-"errõl a szolgáltatásról."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Indításkor"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Csomagok telepítése..."
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Nem tudom beolvasni a partíciós táblát, túl rossz állapotban van.\n"
-"Megpróbálom törölni a rossz partíciókat"
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "Hiba!"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Nem található a(z) '%s' képfájl."
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "Az automatikus telepítés beállításai"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Egy automatikus telepítõfloppy beállítása következik. Ez veszélyes lehet, "
-"ezért körültekintéssel használandó.\n"
-"\n"
-"Ennek segítségével újrajátszható az Ön által ezen gépen végrehajtott "
-"telepítés - közben bizonyos lépéseknél kérdéseket tesz majd fel a program "
-"egyes értékek módosítása érdekében.\n"
-"\n"
-"A maximális biztonság kedvéért a partícionálási és formázási mûveletek soha "
-"nem lesznek automatikusan végrehajtva, bármit is választott Ön ezen gép "
-"telepítése során.\n"
-"\n"
-"Kívánja folytatni?"
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "Az automatikus lépések beállításai"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Adja meg mindegyik lépésnél, hogy újrajátszással vagy kézi vezérléssel "
-"történjen"
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Gratulálunk!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"A floppy létrehozása sikeresen befejezõdött.\n"
-"A telepítés újralejátszása elvégezhetõ."
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Internetkapcsolat megosztása"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Az internetkapcsolat megosztása engedélyezve van"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Az internetkapcsolat megosztása már megtörtént.\n"
-"A megosztott kapcsolat használható.\n"
-"\n"
-"Mit szeretne tenni?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "Letiltás"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "Mégsem"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "Beállítás újból"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "A kiszolgálók letiltása..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Az internetkapcsolat-megosztás letiltása megtörtént."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Az internetkapcsolat megosztása nincs engedélyezve"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Az internetkapcsolat megosztása korábban már megtörtént.\n"
-"A megosztott kapcsolat használata nincs engedélyezve.\n"
-"\n"
-"Mit szeretne tenni?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "Engedélyezés"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "A kiszolgálók engedélyezése..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Az internetkapcsolat megosztása most már engedélyezett."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Az internetkapcsolat megosztásának beállítása következik.\n"
-"Ennek segítségével a helyi hálózat más gépei is elérhetik az internetet\n"
-"ezen a kapcsolaton keresztül.\n"
-"\n"
-"Megjegyzés: a helyi hálózat (LAN) használatához legalább egy hálózati\n"
-"csatolókártya szükséges."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "%s csatoló (a(z) %s modul felhasználásával)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "%s csatoló"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Nem található hálózati csatolókártya a számítógépben."
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nem található Ethernet hálózati adapter a rendszerben. Futtassa a "
-"hardverkonfigurációs eszközt."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Hálózati csatolófelület"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Egyetlen beállított hálózati csatolókártya található a gépben:\n"
-"\n"
-"%s\n"
-"\n"
-"A helyi hálózat paramétereit ehhez a csatolóhoz fogom beállítani."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Válassza ki, hogy milyen kártyával csatlakozik a helyi hálózathoz."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Figyelem! A hálózati csatolókártya már be van állítva. Beállítás újból..."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Hálózati címhibát észleltem az aktuális konfigurációban: %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "A tûzfal beállításait sikerült felismerni."
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Figyelem! Egy már létezõ tûzfalbeállítást találtam. Néhány apróbb "
-"módosításra szükség lehet a telepítés elvégzése után."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Beállítás..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Beállítószkriptek, szoftvertelepítés, szerverek indítása..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "A(z) %s csomag telepítésénél hiba történt"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"A beállítás sikeresen befejezõdött.\n"
-"Az internetkapcsolat most már bármelyik, a helyi hálózaton található géppel "
-"megosztható az automatikus hálózati címkiosztás (DHCP) segítségével."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "A megosztás már megtörtént, de a kapcsolat használata le van tiltva."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "A megosztás már megtörtént, a kapcsolat használható."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Az internetkapcsolat megosztása még nem történt meg."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Az internetkapcsolat megosztásának beállítása"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Üdvözöljük az internetkapcsolat-megosztás beállítóprogramjában!\n"
-"\n"
-"%s\n"
-"\n"
-"Kattintson a Beállítás gombra a beállításvarázsló elindításához."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Hálózatbeállítás (%d csatoló)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Profil törlése..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "A törölni kívánt profil:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Új profil..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"A létrehozandó profil neve (az új profil az aktuális pontos másolata lesz) :"
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Gépnév: "
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Internet-hozzáférés"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Típus:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Átjáró (gateway):"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Csatoló:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Állapot:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Csatlakozva"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Nincs csatlakozva"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Csatlakozás..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "A kapcsolat bontása..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "A kapcsolat elindítása..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "A kapcsolat bezárása..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"A kapcsolat nincs lezárva.\n"
-"A lezárás kézzel is elvégezhetõ, az\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"parancsfájl rendszergazdaként történõ futtatásával."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "A kapcsolat bontása sikeresen megtörtént."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Az internet-hozzáférés beállítása..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "A helyi hálózat beállítása"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Meghajtó"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Csatoló"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protokoll"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "Állapot"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "A helyi hálózat beállítása..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr "A varázsló indításához kattintson ide ->"
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Alkalmazás"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Egy kis türelmet kérek, végrehajtom a kért módosításokat"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Egyetlen csatoló sincs beállítva.\n"
-"A beállítás elvégzéséhez kattintson a 'Beállítás' gombra."
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "A helyi hálózat beállítása"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "%s csatoló: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Rendszerindítási protokoll"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Automatikus indítás"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP-kliens"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "aktiválás most"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "deaktiválás most"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nincs beállítva egyetlen internetkapcsolat sem.\n"
-"Kapcsolat létrehozásához kattintson a 'Beállítás' gombra."
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Internetkapcsolat beállítása"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Internetkapcsolat beállítása"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "A csatlakozás típusa: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Paraméterek"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Ethernet-kártya"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP-kliens"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Üdvözlet a cracker-eknek"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Gyenge"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoiás"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ezt a szintet csak körültekintéssel használja. Egyszerûbben tudja általa a\n"
-"rendszert használni, de így az sebezhetõbb is lesz: ne válassza ezt a\n"
-"szintet, ha a gép hálózatba van kötve, vagy az internethez csatlakozik.\n"
-"A hozzáférés nem jelszó által védett."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"A jelszavak be vannak kapcsolva, de hálózatra kapcsolódó gép esetén\n"
-"ez a konfiguráció még mindig nem ajánlott."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Néhány biztonsági kiegészítés lép életbe ezen a szinten, több a biztonsági\n"
-"ellenõrzés és figyelmeztetés."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Ezt a biztonsági szintet javasoljuk, ha a gépe kliensként csatlakozik az\n"
-"internethez. A biztonsági ellenõrzések életbe lépnek."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Ezzel a biztonsági szinttel használhatja a gépét kiszolgálóként.\n"
-"Ez a biztonsági szint elég magas ahhoz, hogy a rendszer sok, hálózaton\n"
-"keresztül csatlakozó klienst szolgáljon ki."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Megtartjuk a 4. szint beállításait, de most a rendszer teljesen zárt.\n"
-"Ez a legbiztonságosabb szint."
-
-#: ../../standalone/draksec_.c:65
-msgid "Security level"
-msgstr "Biztonsági szint"
-
-#: ../../standalone/draksec_.c:67
-msgid "Use libsafe for servers"
-msgstr "A libsafe használata kiszolgálókhoz"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Könyvtár, amely védelmet nyújt a puffertúlcsordulásos és a formátumsztringes "
-"támadások ellen."
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Biztonsági szint beállítása"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Vezérlõközpont"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Válassza ki a használni kívánt eszközt"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "használat: keyboarddrake [--expert] [billentyûzet]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Parancsértelmezõben a BackSpace billentyû \"Delete\"-et jelentsen?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Cserélje ki a CD-ROM lemezt"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Helyezze be a telepítési CD-t a meghajtóba és nyomja meg az OK gombot.\n"
-"Ha nincs ilyen lemeze, akkor nyomja meg a \"Mégsem\" gombot a frissítés\n"
-"kihagyásához."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Nem sikerült elindítani a frissítést!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "nem találtam serial_usb-t\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Emuláljam a harmadik gombot?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "A tûzfal beállításai"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "A tûzfal beállításai"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Tûzfal-beállítások\n"
-"\n"
-"Már elvégezte a tûzfal beállítását. Kattintson a Beállítás\n"
-"gombra a tûzfal módosításához vagy megszüntetéséhez."
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Tûzfal-beállítások\n"
-"\n"
-"Kattintson a Beállítás gombra a tûzfal beállításához"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Válasszon nyelvet"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Válasszon telepítési módot"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Merevlemez keresése"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Egér beállítása"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Billentyûzet kiválasztása"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Biztonság"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Fájlrendszerek beállítása"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Partíciók formázása"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Csomagok kiválasztása"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Rendszer telepítése"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Felhasználó hozzáadása"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Hálózat beállítása"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Szolgáltatások beállítása"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Indítólemez készítése"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Rendszerindító program telepítése"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Az X beállítása"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Kilépés a telepítõbõl"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Személyes tûzfal beállítása\n"
-"\n"
-"Ezzel egy személyes felhasználásra szánt mini tûzfalat lehet beállítani.\n"
-"Ha egy sokfelhasználós, vállalati szintû megoldást szeretne, szerezze\n"
-"be a speciális MandrakeSecurity Firewall disztribúciót."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"A következõ kérdésekre adott válaszok határozzák meg, hogy az internetrõl\n"
-"mely szolgáltatásokhoz lehet majd csatlakozni. Gondolja át a válaszokat,\n"
-"mert a hálózati biztonság elsõrendûen fontos.\n"
-"\n"
-"Ha nem használja a felsorolt szolgáltatások valamelyikét, ne engedélyezze\n"
-"a hozzáférést. A beállításokat késõbb ebbõl a programból bármikor meg\n"
-"lehet változtatni."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Használ olyan internetkiszolgálót (webszervert) ezen a gépen, amelyet\n"
-"elérhetõvé kell tenni az internetrõl? Ha csak a helyi géprõl kell\n"
-"hozzáférni a kiszolgálóhoz, akkor válaszoljon nemmel.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Használ valamilyen névkiszolgálót (DNS-szervert) ezen a gépen? Csak\n"
-"akkor válaszoljon igennel, ha a cím- és zónainformáció lekérdezését az\n"
-"egész internetrõl lehetõvé szeretné tenni.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Szeretné engedélyezni a bejövõ SSH (Secure Shell) kapcsolatokat? Ez\n"
-"egy telnet-szerû távoli bejelentkezési lehetõség. Ha még a telnetet\n"
-"használja, akkor mindenképpen váltson át az SSH használatára.\n"
-"A telnet-forgalom nincs titkosítva, ezért az abban átvitt jelszavak\n"
-"nincsenek védve illetéktelen elolvasás ellen. Az SSH egy biztonságosabb\n"
-"megoldás, ugyanis titkosítást használ."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Szeretné engedélyezni a bejövõ telnet-kapcsolatokat?\n"
-"A telnet-adatforgalom nem titkosított; biztonsági kockázatot jelent.\n"
-"Erõsen javasoljuk, hogy itt a \"Nem\"-et válassza, és SSH-t használjon\n"
-"telnet helyett.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Használ ezen a gépen olyan FTP-kiszolgálót, amelyet elérhetõvé kell tenni\n"
-"az internetrõl? Ha igen, akkor erõsen javasoljuk, hogy csak anonymous\n"
-"adatátvitelt engedélyezzen. Az FTP-vel továbbított jelszavak nem\n"
-"biztonságosak, mert az FTP nem használ semmilyen titkosítást\n"
-"adatátvitelnél.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Használ ezen a gépen e-mail-kiszolgálót (mail-szervert)? Ha az\n"
-"elektronikus üzeneteit ezen a gépen keresztül továbbítja,\n"
-"akkor feltehetõen igen. Máskülönben ne engedélyezze.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Használ ezen a gépen POP- vagy IMAP-kiszolgálót? Ezeken\n"
-"keresztül lehet a beérkezõ levelekhez hagyományos\n"
-"(nem Web-alapú) levelezõprogrammal hozzáférni.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Úgy tûnik, hogy a Linux kernel 2.2-es változatát használja. Ha az\n"
-"IP-címek kiosztásához helyi dinamikus címkiosztó szolgáltatást használ,\n"
-"akkor ezt ebben az esetben külön engedélyezni kell. Használ\n"
-"dinamikus címkiosztást?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Részt vesz a gép automatikus idõszinkronizációban?\n"
-"A közepes és nagyobb vállalatok így biztosítják, hogy a különféle\n"
-"gépek órái ne térjenek el egymástól (például a naplózásnál fontos).\n"
-"Ha nem tud ilyesmirõl, és nem nagy cégnél használja a gépet, akkor\n"
-"valószínûleg nemleges a válasz."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"A beállítás befejezõdött. Elmenthetem a lemezre a módosításokat?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "%s megnyitása nem sikerült: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "%s írásra való megnyitása nem sikerült: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Hálózati számítógép (kliens)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-, SMB-, proxy- és SSH-kiszolgáló"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Iroda"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "GNOME-munkaállomás"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Segédprogramok a Palmhoz és a Visorhoz"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Munkaállomás"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Tûzfal/útválasztó (router)"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "DNS- és NIS-kiszolgáló"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Irodai programok: szövegszerkesztõk (KWord, AbiWord), táblázatkezelõk "
-"(KSpread, Gnumeric), PDF-nézegetõk, ..."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Hangkezelõ eszközök: MP3- és MIDI-lejátszók, hangkeverõk, ..."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Könyvek és HOGYAN-ok a Linuxról és a szabad szoftverekrõl"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE-munkaállomás"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "IceWM, WindowMaker, Enlightenment, Fvwm, ..."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimédia - videó"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "E-mail-eszközök, hírkezelés, web-eszközök, fájlátvitel és csevegés"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Adatbázis"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL vagy MySQL adatbázis-kiszolgáló"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Segédprogramok a számítógép beállításához"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimédia - hang"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Segédprogramok"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentáció"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Parancssoros eszközök"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix e-mail-kiszolgáló, Inn hírkiszolgáló"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internetes munkaállomás"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimédiás munkaállomás"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Beállítás"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "További grafikus környezetek (GNOME, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"A K Desktop Environment - az alapvetõ grafikus környezet - az ahhoz tartozó "
-"eszközökkel együtt"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafikus környezet"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Fejlesztés"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Segédprogramok CD-íráshoz"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Irodai munkaállomás"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "GNOME, IceWM, WindowMaker, Enlightenment, Fvwm, ..."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafikus programok (például a GIMP)"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C/C++ fejlesztõkönyvtárak, programok és include fájlok"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Kiszolgáló hálózati számítógépekhez"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "E-mail/csoportmunka/hírek"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Játékgép"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videólejátszók és -szerkesztõk"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimédia - grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Játékprogramok: lövöldözõs, táblás, stratégiai, ..."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Eszközök levelezéshez, hírkezeléshez (pine, mutt, tin, ...) és a Web "
-"böngészéséhez"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archiválás, emulátorok, monitorozó programok"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Személyes pénzügyek"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafikus környezet felhasználóbarát alkalmazásokkal és segédprogramokkal"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Kliensprogramok különféle protokollokhoz (például: ssh)"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet-átjáró"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Hang/videólejátszó és -szerkesztõ programok"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Más grafikus környezetek"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Szövegszerkesztõk, parancsértelmezõk, fájlkezelõk, terminálprogramok"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programok a személyes pénzügyek kezeléséhez (például: GnuCash)"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Játékok"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Személyes információkezelés"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimédia - CD-írás"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Tudományos munkaállomás"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr ""
-#~ "Az /etc/sysconfig/autologin fájlt nem sikerült olvasásra megnyitni: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Újra szeretné indítani a hálózatkezelést?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Elfogadja?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Újra kell indítanom a hálózati eszközt:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr ""
-#~ "Újra kell indítani a(z) %s hálózati eszközt. Elvégezhetem a mûveletet?"
-
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "A leggyakoribb választások a \"/dev/hda\" (az elsõ IDE-csatolós lemez)\n"
-#~ "és a \"/dev/sda\" (az elsõ SCSI-csatolós lemez)."
-
-#~ msgid ""
-#~ "The printing system which you are going to use (%s) needs basic \n"
-#~ "network functionality, but your network functionality is not\n"
-#~ "configured yet. If you go on without network configuration, your\n"
-#~ "printing system will set up a network only consisting of the \n"
-#~ "local machine which does not allow the usage of remote printers\n"
-#~ "or the sharing of a local printer with remote clients, but you\n"
-#~ "can set up local printers usable from your local machine. How do\n"
-#~ " you want to proceed?"
-#~ msgstr ""
-#~ "Az Ön által használni kívánt nyomtatási rendszer (%s) hálózati\n"
-#~ "funkciókat igényel, azok viszont még nincsenek beállítva. Ha Ön\n"
-#~ "továbblép hálózatbeállítás nélkül, akkor a nyomtatási rendszer\n"
-#~ "egy olyan hálózatot állít be, amelyben csak a helyi gép szerepel;\n"
-#~ "így tehát sem távoli nyomtatók használatára nem lesz lehetõség,\n"
-#~ "sem pedig arra, hogy a helyi nyomtatót távoli gépek használják;\n"
-#~ "lehetõség lesz viszont a helyi géprõl helyi nyomtatókra nyomtatni.\n"
-#~ "Mit szeretne tenni?"
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Itt láthatók az eddig beállított nyomtatók.\n"
-#~ "Újakat lehet létrehozni, vagy a meglevõket módosítani."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr ""
-#~ "A kapcsolat várakozási ideje (másodpercben) [béta-szintû, még nincs "
-#~ "befejezve]"
diff --git a/perl-install/share/po/i18n_compssUsers b/perl-install/share/po/i18n_compssUsers
deleted file mode 100644
index f6dc1ef7d..000000000
--- a/perl-install/share/po/i18n_compssUsers
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/usr/bin/perl
-
-use MDK::Common;
-
-sub get {
-    my ($meta_class) = @_;
-    my @l;
-
-    local *F;
-    open F, "../compssUsers$meta_class" or return; #die "can't open file ../compssUsers$meta_class";
-    foreach (<F>) {
-	/^\s*$/ || /^#/ and next;
-
-	if (/^(\S.*)/) {
-	    my ($icon, $path, $descr);
-	    /^(.*?)\s*\[icon=(.*?)\](.*)/  and $_ = "$1$3", $icon  = $2;
-	    /^(.*?)\s*\[path=(.*?)\](.*)/  and $_ = "$1$3", $path  = $2;
-	    /^(.*?)\s*\[descr=(.*?)\](.*)/ and $_ = "$1$3", $descr = $2;
-	    push @l, $_, $descr, $path;
-	}
-    }
-    close F;
-
-    @l;
-}
-
-my @l = map { if_(/msgid "(.*)"/, $1) } cat_("DrakX.pot");
-my %l; @l{@l} = ();
-
-foreach (uniq(get(''), get('.desktop'))) {
-    if ($_) {
-        s/"/\"/g;
-        s/\n//g;
-	next if exists $l{$_};
-        print qq(
-#: ../../share/compssUsers:999
-msgid "$_"
-msgstr ""
-);
-    }
-}
diff --git a/perl-install/share/po/id.po b/perl-install/share/po/id.po
deleted file mode 100644
index 89c5726ea..000000000
--- a/perl-install/share/po/id.po
+++ /dev/null
@@ -1,10158 +0,0 @@
-# Instal Grafis Mandrake
-# Copyright (C) 1999 Mandrakesoft
-# Budi Rachmanto <rac@linux-mandrake.com>, 2001
-# Linux Indonesia <http://www.linux.or.id>, 1999-2001
-# Mohammad DAMT <mdamt@cdl2000.com>, 1999-2001
-# Andy <chandy@indo.net.id>, 1999
-# Kelana <nk@telkom.net>, 1999
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX 0.1\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-06-21 21:55+09:00\n"
-"Last-Translator: Budi Rachmanto <rac@linux-mandrake.com>\n"
-"Language-Team: Bahasa Indonesia <id@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.6\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Konfigurasikan semua monitor secara terpisah"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Gunakan ekstensi Xinerama"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigurasikan kard ini sja \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Konfigurasi monitor lebih dari satu"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Sistem Anda mendukung penggunaan monitor lebih dari satu.\n"
-"Silakan pilih"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Card Grafik"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Pilih kartu grafis"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Pilih server X"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "Server X"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Konfigurasi XFree mana yang Anda inginkan?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Card Anda memiliki akselerasi hardware 3D, namun hanya bisa digunakan pada "
-"XFree %s.\n"
-"Card Anda ini bisa digunakan pada XFree %s yang memiliki dukungan baik dalam "
-"2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Card Anda dapat menggunakan akselerasi hardware 3D pada XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s dengan akselerasi hardware 3D"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Card Anda dapat menggunakan akselerasi hardware 3D pada XFree %s,\n"
-"NAMUN INI BARU DALAM TAHAP PERCOBAAN DAN DAPAT MEMBUAT KOMPUTER ANDA HANG."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s dengan akselerasi hardware 3D PERCOBAAN"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Card Anda dapat menggunakan akselerasi hardware 3D pada XFree %s,\n"
-"NAMUN INI BARU DALAM TAHAP PERCOBAAN DAN DAPAT MEMBUAT KOMPUTER ANDA HANG.\n"
-"Card Anda ini dapat digunakan XFree %s yang lebih baik dalam 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalasi driver display)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "Konfigurasi XFree"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Pilih memori kartu grafis Anda"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Pilih opsi server"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Pilih monitor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Ada dua parameter penting, yaitu laju refresh vertikal, yaitu laju\n"
-"kecepatan saat seluruh layar direfresh, dan yang lebih penting lagi adalah\n"
-"laju sync horisontal, yaitu laju kecepatan saat menanyangkan scan line.\n"
-"\n"
-"Anda TIDAK BOLEH mengisi parameter tadi yang tidak dapat\n"
-"diimbangi dengan kemampuan monitor Anda, karena monitor\n"
-"Anda akan rusak berat.\n"
-"Kalau Anda ragu, gunakan setting yang umum saja."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Laju refresh horisontal"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Laju refresh vertikal"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Monitor tidak dikonfigurasi"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Kartu grafis belum dikonfigurasi"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Resolusi belum ditentukan"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Anda ingin test konfigurasi ini?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Awas: testing ini bisa membuat card komputer Anda hang"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Test konfigurasi"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"coba ubah beberapa parameter"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Ada error nih:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Cabut dalam %d detik"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Apa sudah sesuai settingnya?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ada kesalahan, coba ubah beberapa parameter"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Resolusi"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Pilih resolusi dan kedalaman warna"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Card Grafik: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Mode Pakar"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Tunjukan seluruhnya"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Resolusi"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Layout Keyboard: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Jenis Mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Device Mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "HorizSync Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "VertRefresh Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Card Grafik: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Card Grafik: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memori Grafik: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Pilihan kedalaman warna: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolusi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Server XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Driver XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Siap-siap konfigurasikan X "
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Apa yang akan anda mau?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Ubah Monitor"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Ubah kartu grafis"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Ubah Parameter Server"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Ubah Resolusi"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Lihat info"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Test lagi"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Keluar"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Lakukan perubahan?\n"
-"Konfigurasi sekarang adalah:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Silakan masuk lagi ke %s untuk mengaktifkan perubahan"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Silakan log out dan tekan Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X saat startup"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Saya bisa bikin komputermu akan menjalankan X saat booting.\n"
-"Anda mau fasilitas ini ?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 warna (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ribu warna (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ribu warna (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 juta warna (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milyar warna (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB atau lebih"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA Standar, 640x480 pada 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "VGA Super, 800x600 pada 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Kompatibel, 1024x768 pada 87 Hz interlaced (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 pada 87 Hz interlaced, 800x600 pada 56 hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 pada 60 Hz, 640x480 pada 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 pada 60 Hz, 800x600 pada 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 pada 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency yang dapat mencapai 1280x1024 pada 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency yang dapat mencapai 1280x1024 pada 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency yang dapat mencapai 1280x1024 pada 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor yang dapat mencapai 1600x1200 pada 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor yang dapat mencapai 1600x1200 pada 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Sektor pertama di partisi boot"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Sektor pertama di drive (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "Instalasi SILO"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Bootloader akan diinstall di mana?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "Instalasi LILO/grub"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO dengan menu teks"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO dengan menu grafik"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Boot dari DOS/windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Parameter Bootloader utama"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Bootloader yang hendak digunakan"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Instalasi Bootloader"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Device boot"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (tidak bisa dipakai pada BIOS kuno)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Compact"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "compact"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Mode video"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Delay sebelum boot ke image default"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Password"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Password (lagi)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Batasi parameter command line"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "batasi"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Hapus /tmp saat boot"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ukuram RAM yg tepat (saya nemu %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Buat multi profil"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Berikan jumlah RAM dalam satuan MB"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Pilihan ``Batasi parameter command line'' tidak ada gunanya tanpa password"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Silakan ulangi"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Password tidak sama"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Pesan Init"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Delay Open Firmware"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Timeout Kernel Boot"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Aktifkan boot dari CD?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Aktifkan boot dari OF?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Default OS?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Ini adalah entri yang lain lagi.\n"
-"Anda boleh tambahkan atau mengubah yang sudah ada."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Tambah"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Selesai"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Modifikasi"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Tipe entri mana yang hendak ditambahkan"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "OS Lain (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "OS Lain (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "OS Lain (windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Image"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Sambung"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Read-write"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Table"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Tidak aman"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Label"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Default"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-size"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Hapus entri"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Label tidak boleh kosong"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Label ini sudah dipakai"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Ketemu interface %s %s"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Anda punya lagi?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Punya %s interface?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Tidak"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Ya"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Lihat info hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Menginstall driver untuk card %s %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Driver %s mana yang hendak saya coba?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Kadangkala, driver %s butuh informasi tambahan agar dapat bekerja normal\n"
-"walaupun kadangkala juga ini tidak perlu. Nah, apakah Anda ingin untuk\n"
-"memberikan parameter tambahan tadi atau biarkan saja drivernya melakukan\n"
-"deteksi sendiri parameternya? Biasanya, autodetek akan membuat kompputer\n"
-"jadi hengki (baca: hang), tapi biasanya sih tak ngerusak hardwarenya."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Probe otomatis"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Tuliskan optionnya"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Sekarang Anda boleh berikan parameter untuk module %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Silakan berikan parameter untuk modul %s ini.\n"
-"Parameter biasanya dalam format ``nama=nilai nama2=nilai2...''.\n"
-"Misalnya, ``io=0x300 irq=8''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Pilihan Module:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Module %s gagal diload.\n"
-"Mau coba lagi dengan parameter yang lain?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(Sudah ditambahkan %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Password ini terlalu sederhana"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Silakan tuliskan nama user"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Nama user hanya boleh terdiri dari huruf, angka, `-' dan `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "User ini sudah ada sebelumnya"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Tambah user"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Masukkan user\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Buat user"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Nama Lengkap"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Nama user"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Ikon"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Saya bisa bikin komputermu akan langsung login dengan suatu user.\n"
-"Kalau tidak ingin pakai fasilitas ini, tekan tombol Batal"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Pilih user default:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Pilih window manager yang hendak digunakan"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Pilih dulu bahasanya dong bow"
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "Anda bisa pilih bahasa lain yang akan tersedia setelah install selesai"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Semua"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Selamat datang di Sang Pemilih Sistem Operasi, %s!\n"
-"\n"
-"pilih sistem operasi pada daftar di atas atau tunggu %d detik untuk boot ke "
-"default.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Selamat datang di sang pemilih sistem operasi, GRUB"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Gunakan tombol %c dan %c untuk memilih entri yang disorot"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Tekan enter untuk memboot OS yang terpilih, atau tekan 'e' untuk edit"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "perintah sebelum booting, atau 'c' untuk command line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Entri yang dipilih akan diboot secara otomatis dalam %d detik."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "Waah /boot tak cukup spacenya nih"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Bootloader akan diinstall di mana?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr " belom ada help-nya nih.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfigurasi Tipe Boot"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_File"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/File/_Keluar"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Kategori Monitor Gaya Baru"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor GayaBaru"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor Biasa"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor Biasa Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Jalankan aurora saat boot"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "mode Lilo/Grub"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Manajer Boot: %s. Klik Configure untuk memanggil pakar setup."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Konfigurasikan"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Mode boot"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "mode sistem"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Jalankan X-Window saat sistem dimulai"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Tidak jack, saya tidak mau autologin"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Iya dong, saya mau pakai autologin (user,desktop)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Batalkan"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "aduh, Ik ngga bisa baca file /etc/inittab nih: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Instalasi LILO gagal. Ada kesalahan berikut:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d menit"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 menit"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d detik"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Mohon untuk membackup data Anda dulu"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Baca dengan seksama!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Kalau Anda mau pakai aboot, sisakan free space dulu (2048 sektor sih cukup "
-"deh)\n"
-"di awal disk"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Ada Kesalahan"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Wizard"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Baru"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "Antrian remote"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Posisi mount"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Pilihan"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Tipe"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Unmount"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Mount"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Pilih maunya apa"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Anda punya satu partisi fat yang besar.\n"
-"(dipakai oleh Microsoft Dos/windows yah ?).\n"
-"Saya sarankan untuk meresize partisi ini\n"
-"(click di situ, dan pilih \"Ubah ukuran\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Silakan pilih partisinya"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Silakan pilih partisinya"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Silakan pilih partisinya"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Detil"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "gagal melakukan mount"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Kosong"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Lainnya"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Tipe filesystem:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Buat"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Gunakan ``%s'' saja"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Hapus"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Gunakan ``unmount'' terlebih dahulu"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Setelah mengganti tipe partisi %s, semua data pada partisi ini akan hilang"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Mount device %s akan di mount ke mana?"
-
-#: ../../diskdrake.pm_.c:500
-#, fuzzy
-msgid "Mount options"
-msgstr "Pilihan Module:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:525
-#, fuzzy
-msgid "Removable media"
-msgstr "automounting media removable"
-
-#: ../../diskdrake.pm_.c:532
-#, fuzzy
-msgid "Change type"
-msgstr "Mengubah tipe partisi"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Filesystem apa yang anda inginkan"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Server"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Pilih maunya apa"
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Membuat partisi baru"
-
-#: ../../diskdrake_interactive.pm_.c:188
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Berubah ke modus ahli"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Berubah ke modus normal"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Tak Jadi (undo)"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Jalan terus?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Keluar tanpa menyimpan"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Keluar dari program tanpa menyimpan dalam tabel partisi?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Anda ingin test konfigurasi ini?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Pengalokasian otomatis"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Hapus semua"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Lagi"
-
-#: ../../diskdrake_interactive.pm_.c:250
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Deteksi hard disk"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Tidak ada cukup ruangan untuk mengalokasikan partisi otomatis"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Semua partisi primary telah digunakan"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Aku tak bisa menambah partisi lagi"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Untuk menambahkan partisi lagi, hapus satu agar dapat membuat partisiextended"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Tulis tabel partisi"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Selamatkan dulu tabel partisi"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Selamatkan dulu tabel partisi"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Selamatkan dulu tabel partisi"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "automounting media removable"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Pilih file"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Backup tabel partisi tidak memiliki ukuran yg sama\n"
-"Jalan terus?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Awas"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Maukkan disket di drive\n"
-"semua data pada disket ini akan hilang"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Sedang mencoba menyelamatkan tabel partisi"
-
-#: ../../diskdrake_interactive.pm_.c:340
-#, fuzzy
-msgid "Detailed information"
-msgstr "Lihat info"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Ubah ukuran"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Pindah"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Format"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Aktif"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Tambahkan ke RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Tambahkan ke LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Hapus dari RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Hapus dari LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Ganti RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "digunakan untuk loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Membuat partisi baru"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Sektor awal: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Ukuran dalam MB: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Tipe filesystem: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Posisi mount: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Seting:"
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Sekarang sedang memformat file loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Mengubah tipe partisi"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "Pindah dari ext2 ke ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Device loopback %s akan di mount ke mana?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Tak bisa unset mount point karena partisi ini sudah digunakan untuk\n"
-"loopback. Hapus dulu loopbacknya kalau mau begitu."
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Sedang menghitung bound filesystem fat"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Sedang mengubah ukuran"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Ukuran partisi ini tidak dapat diubah"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "semua data pada partisi ini sebaiknya dibackup dulu"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Sehabis meresize partisi %s, semua data pada partisi ini akan hilang"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Pilih ukuran baru"
-
-#: ../../diskdrake_interactive.pm_.c:591
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Ukuran dalam MB: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Disk mana yang hendak dipindah?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Sektor mana yang hendak dipindah"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Pindah"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Memindahkan partisi..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Pilih RAID yang ada untuk ditambahkan ke"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "baru"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Pilih LVM yang ada untuk ditambahkan ke"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "nama LVM?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Partisi ini tak bisa dipakai sebagai loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Nama file loopback: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nama Lengkap"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "File sudah digunakan loopback yang lain, pilih yang lainnya dong"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "File sudah ada. Gunakan file ini ?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "device"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "level"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "ukuran chunk"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Hati-hati nih: operasi ini sangat berbuahayyya"
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Tipe partisi apa yang hendak digunakan?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Maaf, Saya tidak mau membuat /boot di drive ini (silindernya > 1024).\n"
-"Kalau Anda pakai LILO dan tak jalan, atau Anda tak mau LILO dan tak mau /"
-"boot juga"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Anda menambahkan partisi root diluar silinder 1024,\n"
-"dan anda tidak memiliki partisi /boot. Apabila anda akan menggunakan lilo\n"
-"(boot manager), hati-hati dalam menambahkan partisi /boot"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Anda memilih partisi RAID software sebagai root (/).\n"
-"Sekarang bootloader tak ada yang bisa handel tanpa partisi /boot.\n"
-"Jadi hati-hati yah untuk tambahkan partisi /boot"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Tabel partisi pada drive %s akan ditulis ke disk!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Anda harus reboot agar perubahan table partisi dapat berlaku"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Sehabis memformat partisi %s semua data pada partisi ini akan hilang"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "sedang memformat"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Sekarang sedang memformat file loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Melakukan format partisi %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid gagal"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Tidak ada cukup ruangan untuk mengalokasikan partisi baru"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Tidak ada cukup ruangan untuk mengalokasikan partisi baru"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Resolusi: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Device: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS letter: %s (hanya tebakan)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Tipe: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Nama: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Mulai: sektor %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Ukuran: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektor"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Dari silinder %d sampai silinder %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Telah diformat\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Belum diformat\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Telah di-mount\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "File loopback: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partisi di-boot secara default\n"
-"    (untuk MS-DOS boot, bukan untuk lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Level %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Ukuran chunk %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Disk RAID %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nama file loopback: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Mungkin partisi ini adalah \n"
-"partisi driver, jadi sebaiknya\n"
-"jangan diapa-apain deh.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"partisi ini adalah partisi bootstrap\n"
-"yang khusus digunakan \n"
-"oleh sistem dual boot.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Ukuran: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ukuran: %s silinber, %s head, %s sektor\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Disk LVM %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partisi tipe: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "pada bus %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Pilihan: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s proses format dari %s gagal"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "tidak bisa melakukan format %s dengan tipe %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "gagal melakukan mount"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck gagal dg kode keluar %d / sinyal %d"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "gagal melakukan mount: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "error melakukan unmount %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simple"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Tak dapat pakai JFS utk partisi berukuran di bawah 16MB"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Tak dapat pakai ReiserFS utk partisi berukuran di bawah 32MB"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Mount point harus diawali dengan /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Partisi dengan mount poin %s sudah ada\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Anda tidak bisa menggunakan LVM Logical Volume untuk titik mount %s."
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Direktori ini harus ada di filesystem root"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "Anda perlu filesystem yg benar (ext2, reiserfs) utk titik mount ini\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "error membuka file %s untuk ditulisi: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Error - tidak ada device yang valid untuk membuat filesystem baru.Periksa "
-"kembali hardware untuk mencari penyebabnya"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Anda tak punya partisi!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Di atas telah terdaftar partisi Linux yang sudah ada yang saya deteksi pada "
-"hard drive Anda. Anda dapat tetap menggunakannya nanti. Bila Anda mengubah "
-"pilihan ini, Anda paling tidak perlu memberikan lokasi partisi root\n"
-"(\"/\"). Jangan pilih partisi yang terlalu kecil agar bisa menginstall "
-"software dengan leluasa. Bila Anda ingin\n"
-"menyimpan data pada partisi lain, Anda perlu memilih partisi \"/home"
-"\" (Hanya bisa dibuat bila punya lebih\n"
-"dari satu partisi Linux.)\n"
-"\n"
-"\n"
-"Sebagai Informasi, tiap-tiap partisi terdaftar dengan cara berikut: \"Nama"
-"\", \"Kapasitas\".\n"
-"\n"
-"\n"
-"\"Nama\" dituliskan dalam bentuk kode sebagai berikut: \"tipe hard drive\","
-"\"nomor hard drive\",\n"
-"\"nomor partisi\" (misalnya \"hda1\").\n"
-"\n"
-"\n"
-"\"Tipe hard drive\" adalah \"hd\" bila drive tersebut bertipe IDE dan "
-"bernilai \"sd\"\n"
-"bila berupa drive SCSI.\n"
-"\n"
-"\n"
-"\"Nomor Hard Drive\", selalu berupa huruf setelah \"hd\" atau \"sd\". Bila "
-"berupa IDE,\n"
-"maka:\n"
-"\n"
-"   *\"a\" berarti \"hard drive master pada kontroller IDE primer\",\n"
-"\n"
-"   *\"b\" berarti \"hard drive slave pada kontroler IDE primer\",\n"
-"\n"
-"   *\"c\" berarti \"hard drive master pada kontroler IDE sekunder\",\n"
-"\n"
-"   *\"d\" berarti \"hard drive slave pada kontroler IDE sekunder\",\n"
-"\n"
-"\n"
-"Pada drive SCSI, \"a\" berarti \"hard drive utama, \"b\" berarti \"hard "
-"drive kedua\", dsb..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Anda boleh pilih service mana aja yang mau dijalankan saat boot.\n"
-"Anda bisa lihat keterangan servicenya pada baloon help kecil yang akan "
-"muncul\n"
-"kalau Anda geserkan mousenya ke atas nama servicenya.\n"
-"\n"
-"Hati-hati pilihnya ya, apalagi kalau mau pakai sistem ini sebagai server\n"
-"jangan sembarang nyalakan service yang tak perlu. Mohon diingat\n"
-"bahwa ada service yang berbahaya bila dinyalakan pada server\n"
-"Pokoknya, pilih saja service yang Anda anggap penting."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux mengatur jam dengan GMT atawa \"Greenwich Mean Time\" dan \n"
-"menterjemahkannya ke waktu lokal sesuai dengan timezone yang Anda pilih."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-#, fuzzy
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Pada tahap ini, pilihlah tempat Linux Mandrake akan diinstal di harddisk.\n"
-"Bila harddisk masih kosong / ada sistem operasi lain yg mengisi seluruhnya,\n"
-"Anda perlu melakukan proses partisi. Pada dasarnya, proses partisi harddisk\n"
-"adalah membagi harddisk secara logika, dg membuat ruang kosong utk "
-"instalasi\n"
-"sistem Linux Mandrake.\n"
-"\n"
-"\n"
-"Karena bersifat satu arah (tak dapat dikembalikan ke partisi awal), proses\n"
-"partisi dapat membuat stres dan pusing kepala, apalagi jika Anda belum\n"
-"berpengalaman. Kini saya akan mempermudah proses ini.\n"
-"Sebelum dimulai, baca dan pelajari dulu buku manual dengan baik.\n"
-"\n"
-"\n"
-"Anda perlu sedikitnya dua partisi. Satu utk sistem operasi itu sendiri dan\n"
-"satu lagi utk virtual memory (juga dikenal dengan istilah Swap).\n"
-"\n"
-"\n"
-"Bila partisi-partisi tersebut sudah ada sebelumnya (hasil instal "
-"sebelumnya/\n"
-"dibuat oleh program partisi lain), Anda bisa memilih partisi-partisi tsb "
-"utk\n"
-"digunakan sbg tempat instalasi sistem Linux ini.\n"
-"\n"
-"\n"
-"Jika belum ada, Anda harus membuatnya. Gunakan program wizard di atas. Ada\n"
-"bbrp cara yg dapat Anda gunakan tergantung konfigurasi harddisk yg Anda\n"
-"pakai:\n"
-"\n"
-"* Gunakan partisi yang ada: wizard mendeteksi satu/lebih partisi Linux di\n"
-" harddisk ini. Bila Anda ingin tetap menggunakannya, pilihlah ini.\n"
-"\n"
-"\n"
-"* Hapus seluruh disk: Pilih ini bila Anda ingin hapus semua data dan\n"
-" partisi di harddisk Anda utk kemudian digantikan semuanya oleh sistem\n"
-" Linux Mandrake. Hati-hati, Anda tak dapat kembali setelah konfirmasi.\n"
-"\n"
-"\n"
-"* Gunakan ruang kosong di partisi windows: bila wicrosoft mindows\n"
-" terinstal dan memakan seluruh kapasitas disk, Anda perlu membuat ruang\n"
-" kosong untuk data Linux dg menghapus partisi dan data wicrosoft mindows\n"
-" (silakan baca \"Hapus seluruh disk\" atau solusi mode \"Pakar\") atau\n"
-" bisa juga mengubah ukuran partisi wicrosoft mindows. Cara ini dapat\n"
-" digunakan tanpa harus kehilangan data. Cara ini disarankan bila Anda\n"
-" ingin memakai Linux Mandrake dan wicrosoft mindows dlm satu komputer.\n"
-"\n"
-"\n"
-" Sebelum memilih cara ini, mohon maklum bahwa partisi wicrosoft mindows\n"
-" sekarang ukurannya lebih kecil. Artinya, ruang dlm wicrosoft mindows utk\n"
-" menyimpan data / menginstall software baru menjadi kecil.\n"
-"\n"
-"\n"
-"* Mode pakar: pilih bila Anda ingin secara manual mempartisi harddisk.\n"
-" Awas! Cara ini amat perkasa tapi juga berbahaya. Anda bisa kehilangan\n"
-" data dg mudah. Jangan pilih kecuali Anda tahu yg Anda lakukan."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Tiap-tiap partisi yang telah dibuat perlu diformat agar dapat digunakan\n"
-"(format berarti membuat filesystem).\n"
-"\n"
-"\n"
-"Sekarang Anda bisa mem-format ulang partisi yg ada utk dihapus datanya.\n"
-"BIla ini hendak Anda lakukan, pilih dulu partisi yang hendak diformat.\n"
-"\n"
-"\n"
-"Ingat, Anda tak perlu melakukan format ulang ini pada semua partisi yg ada.\n"
-"Anda perlu mem-format ulang partisi yg akan diisi sistem operasi (misalnya\n"
-"pada partisi \"/\", \"./usr\", atau \"/var\"), tapi tak perlu melakukannya\n"
-"pada partisi berisi data yang masih akan digunakan (misalnya \"/home\").\n"
-"\n"
-"\n"
-"Hati-hati dalam memilih partisi. Setelah diformat semua data akan hilang "
-"dan\n"
-"tak dapat dikembalikan ke kondisi semula.\n"
-"\n"
-"\n"
-"Pilihlah \"OK\" untuk melakukan format partisi\n"
-"\n"
-"\n"
-"Klik \"Batal\" untuk memilih partisi lain guna instalasi Linux Mandrake."
-
-#: ../../help.pm_.c:376
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Sistem operasi Linux Mandrake Anda yang baru sedang di-instal.\n"
-"Proses ini memakan waktu beberapa menit (tergantung ukuran yang\n"
-"Anda install dan kecepatan komputer Anda).\n"
-"\n"
-"\n"
-"Sabar..."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-#, fuzzy
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Pada tahap ini, Anda harus memilih partisi yg hendak dipakai utk instalasi\n"
-"sistem Linux Mandrake. Bila partisi sudah dibuat (dg instalasi GNU/Linux\n"
-"sebelumnya/dg program partisi lain), Anda bisa memakai partisi-partisi tsb.\n"
-"Jika belum ada, buat terlebih dahulu.\n"
-"\n"
-"\n"
-"Utk membuat partisi, pertama pilihlah harddisk. Anda dapat memilih disk utk\n"
-"dipartisi dg mengklik \"hda\" utk harddisk IDE pertama, \"hdb\" utk disk "
-"IDE\n"
-"kedua, atau \"sda\" bila drive itu adalah drive SCSI pertama dst.\n"
-"\n"
-"\n"
-"Untuk mempartisi harddisk, gunakan pilihan berikut:\n"
-"\n"
-"   * Hapus semua: pilihan ini menghapus semua partisi pada harddisk "
-"terpilih\n"
-"\n"
-"\n"
-"   * Alokasi otomatis: pilihan ini untuk konfigurasi otomatis dlm pembuatan\n"
-"     partisi swap dan Ext2 pada ruang kosong di harddisk.\n"
-"\n"
-"\n"
-"   * Selamatkan tabel partisi: Bila tabel partisi rusak, Anda bisa mencoba\n"
-"     mengembalikannya dg cara ini. Hati-hati dan ingatlah akan resiko "
-"gagal.\n"
-"\n"
-"\n"
-"   * Tak jadi: Anda bisa gunakan untuk membatalkan aksi ini\n"
-"\n"
-"\n"
-"   * Reload: Anda bisa gunakan pilihan ini untuk membatalkan partisi dan\n"
-"     mengembalikan tabel partisi semula.\n"
-"\n"
-"\n"
-"   * Wizard: Bila Anda ingin menggunakan wizard untuk mempartisi harddisk,\n"
-"     pilihlah ini. Cara ini disarankan bila Anda tak faham ttg partisi.\n"
-"\n"
-"\n"
-"   * Restore dari Disket: Bila Anda pernah menyimpan partisi ke disket, "
-"Anda\n"
-"     bisa kembalikan menjadi semula dengan cara ini.\n"
-"\n"
-"\n"
-"   * Simpan ke disket: Pilih ini bila Anda hendak menyimpan tabel partisi "
-"ke\n"
-"     disket utk keperluan di kemudian hari. Amat disarankan Anda melakukan\n"
-"     hal ini.\n"
-"\n"
-"\n"
-"   * Selesai: pilih saat usai mempartisi harddisk dan ingin menyimpannya.\n"
-"\n"
-"\n"
-"Sebagai informasi, Anda bisa mengakses pilihan-pilihan di atas dengan\n"
-"memakai keyboard saja, pilihlah partisi dg tombol Tab dan panah Atas/Bawah.\n"
-"\n"
-"\n"
-"Saat partisi dipilih, Anda bisa gunakan:\n"
-"\n"
-"         * Ctrl C utk membuat partisi baru pada partisi yg masih kosong\n"
-"         * Ctrl D utk menghapus partisi\n"
-"         * Ctrl M utk menset titik mount\n"
-"         \n"
-"\n"
-"\n"
-"Bila Anda menginstal pada komputer PPC, Anda perlu membuat partisi bootstrap "
-"HFS kecil sebesar paling tidak 1 MB untuk\n"
-"digunakan oleh bootloader yaboot. Bila Anda ingin membuat partisi itu lebih "
-"besar lagi, semisal 50MB, Anda bisa memanfaatkannya utk menyimpan\n"
-"kernel cadangan dan image ramdisk utk situasi boot darurat."
-
-#: ../../help.pm_.c:460
-#, fuzzy
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Ada lebih dari satu partisi wicrosoft mindows terdeteksi pada harddisk "
-"Anda.\n"
-"Pilih partisi yang hendak Anda ubah ukurannya untuk instalasi sistem "
-"operasi\n"
-"Linux Mandrake.\n"
-"\n"
-"\n"
-"Sebagai Informasi, tiap-tiap partisi terdaftar dengan cara berikut: \"Nama "
-"di Linux\",\"Nama di windows\", \"Kapasitas\".\n"
-"\n"
-"\n"
-"\"Nama di Linux\" dituliskan dalam bentuk kode sebagai berikut: \"tipe hard "
-"drive\",\"nomor hard drive\",\n"
-"\"nomor partisi\" (misalnya \"hda1\").\n"
-"\n"
-"\n"
-"\"Tipe hard drive\" adalah \"hd\" bila drive tersebut bertipe IDE dan "
-"bernilai \"sd\"\n"
-"bila berupa drive SCSI.\n"
-"\n"
-"\n"
-"\"Nomor Hard Drive\", selalu berupa huruf setelah \"hd\" atau \"sd\". Bila "
-"berupa IDE,\n"
-"maka:\n"
-"\n"
-"   *\"a\" berarti \"hard drive master pada kontroller IDE primer\",\n"
-"\n"
-"   *\"b\" berarti \"hard drive slave pada kontroler IDE primer\",\n"
-"\n"
-"   *\"c\" berarti \"hard drive master pada kontroler IDE sekunder\",\n"
-"\n"
-"   *\"d\" berarti \"hard drive slave pada kontroler IDE sekunder\",\n"
-"\n"
-"\n"
-"Pada drive SCSI, \"a\" berarti \"hard drive utama, \"b\" berarti \"hard "
-"drive kedua\", dsb...\n"
-"\n"
-"\n"
-"\"Nama pada windows\" adalah huruf hard drive Anda pada windows (disk "
-"pertama pada partisi disebut \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Sabar... Proses ini akan makan waktu beberapa menit"
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Pilih \"Instal\" bila Anda belum pernah menginstall Linux Mandrake\n"
-"atau bila Anda ingin menginstall banyak sistem operasi.\n"
-"\n"
-"\n"
-"Pilih \"Update\" bila ingin meng-update Linux Mandrake yang sudah ada.\n"
-"\n"
-"\n"
-"Anda bisa pilih tingkat instal/update sesuai pengetahuan Anda ttg GNU/"
-"Linux:\n"
-"\n"
-"* Disarankan: pilih ini bila Anda belum pernah menginstal OS GNU/Linux.\n"
-" proses instalasi amat mudah dan Anda hanya ditanya bbrp pertanyaan.\n"
-"\n"
-"\n"
-"* Custom: pilih bila Anda familiar dg GNU/Linux dan bisa membuat sistem\n"
-" menjadi sesuai kebutuhan Anda (workstation, server, atau development).\n"
-" Anda akan ditanya lebih banyak dari instalasi \"Disarankan\". Anda perlu\n"
-" tahu bagaimana GNU/Linux bekerja bila memilih kelas instalasi ini.\n"
-"\n"
-"\n"
-"* Pakar: pilih ini bila Anda tahu banyak ttg GNU/Linux. Seperti di kelas\n"
-" \"Custom\", Anda bisa menentukan kegunaan utama sistem ini (workstation,\n"
-" server, atau development). Hati-hati bila memilih kelas ini karena Anda\n"
-" akan dapat melakukan instalasi bebas. Bbrp pertanyaan sulit dijawab jika\n"
-" Anda tak berpengetahuan GNU/Linux yg kuat. Jangan pilih kelas ini kecuali\n"
-" Anda tahu apa yang Anda lakukan."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Pilih port yang betul. Misalnya COM1 di Windows sama dengan ttyS0 di \n"
-"GNU/Linux."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) dan Grub adalah bootloader. Dua-duanya akan memboot\n"
-"GNU/Linux atau sistem operasi lain yang ada di komputer ini.\n"
-"Biasanya, sistem operasi yang sudah ada akan secara normal di deteksi dan\n"
-"diinstallkan. Bila ternyata nanti tak bisa, Anda bisa tambahkan sendiri\n"
-"secara manual di sini. Hati-hati yah nanti waktu kasih parameternya.\n"
-"\n"
-"\n"
-"Anda juga bisa menutup akses ke sistem operasi tertentu. Caranya gampang "
-"aja\n"
-"Anda bisa hapus entrinya disini. Tapi untuk bisa masuk ke sistem operasi "
-"itu\n"
-"Anda perlu bootdisk nantinya."
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Sekarang saya ingin tanya kepada Anda\n"
-"tempat saya bisa meletakkan informasi yang akan dipakai GNU/Linux saat "
-"boot.\n"
-"\n"
-"\n"
-"Kalau Anda kurang tahu, yah pilih saja \"Sektor pertama di \n"
-"drive (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX akan coba cari adapter SCSI PCI.\n"
-"Kalau DrakX menemukan adapter SCSI dan punya drivernya, maka\n"
-"drivernya akan secara otomatis diinstalkan.\n"
-"\n"
-"Bila Anda tidak punya adapter SCSI, SCSI ISA, atau SCSI PCI yang\n"
-"DrakX tak punya drivernya, maka DrakX akan konfirmasi lagi.\n"
-"Bila memang tak ada adapternya, klik aja 'Tak'. Bila klik 'Ya'\n"
-"maka daftar driver akan ditampilkan, dan ente silakan pilih.\n"
-"\n"
-"\n"
-"Kalau Anda ingin menentukan sendiri adapternya, DrakX akan \n"
-"menanyakan apakah ada option lagi. Anda harus perbolehkan DrakX\n"
-"mendeteksi hardwarenya. Biasanya sih bisa kalau begini.\n"
-"\n"
-"Kalau Anda tidak mau, Anda bisa coba kasih optionnya\n"
-"Coba baca Buku Petunjuk (bab 3, bagian: \"Collective Informations on your "
-"hardware\") untuk trik mendapatkan informasi\n"
-"ini dari windows (itu juga kalau Anda install yaaa),\n"
-"dari dokumentasi hardware, atau dari website pabriknya\n"
-"(kalau ada akses ke Internet)."
-
-#: ../../help.pm_.c:720
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Anda bisa menambahkan entri tambahan untuk yaboot, baik untuk sistem operasi "
-"yang\n"
-"lain, atau kernel yang berbeda, atau untuk image boot darurat.\n"
-"\n"
-"\n"
-"Untuk sistem operasi lain, entri ini berisi label dan partisi root saja.\n"
-"\n"
-"\n"
-"untuk sistem Linux, ada beberapa pilihan:\n"
-"\n"
-"\n"
-"  - Label: ini adalah nama yang bisa dipilih saat prompt yaboot.\n"
-"\n"
-"\n"
-"  - image: ini adalah nama kernel untuk diboot. Biasanya bernama vmlinux "
-"atau\n"
-"nama lain yang mirip dengan vmlinux atau ditambahkan ekstensi lain.\n"
-"\n"
-"\n"
-"  - root: device root atau / pada instalasi LInux di sistem \n"
-"\n"
-"\n"
-"\n"
-"  - append: pada hardware Apple, pilihan kernel append sering digunakan\n"
-"untuk membantu inisialisasi hardware video, atau untuk mengaktifkan emulasi "
-"tombol mouse pada keyboard\n"
-"ini berguna untuk mouse Apple yang tidak memiliki tombol kedua dan ketiga.\n"
-"Ini ada beberapa contohnya:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103.111 "
-"hda=autotone\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-"\n"
-"  - initrd: pilihan ini untuk meload module pada saat boot pertama, sesaat "
-"sebelum\n"
-"device boot aktif, atau untuk meload image ramdisk untuk situasi boot "
-"darurat.\n"
-"\n"
-"\n"
-"  - initrd-size: ukuran ramdisk default biasanya adalah 4096 byte. bila Anda "
-"ingin\n"
-"mengalokasikan ramdisk dengan nilai yang lebih besar, maka gunakanlah "
-"pilihan ini.\n"
-"\n"
-"\n"
-"  - read-write: biasanya partisi 'root' dimount secara read-only agar bisa "
-"mengecek filesystem\n"
-"sebelum dimount. Anda bisa mengganti kelakuan aslinya di sini.\n"
-"\n"
-"\n"
-"  - NoVideo: Bila hardware video Apple bertingkah aneh, Anda bisa "
-"menggunakan\n"
-"pilihan ini, dengan dukungan native framebuffer.\n"
-"\n"
-"\n"
-"  - Default: Pilihan ini adalah untuk menjadikan entri ini dapat terpilih "
-"pada yaboot\n"
-"hanya dengan menekan tombol ENTER pada prompt. Entri yang dijadikan default\n"
-"juga akan diberi tanda dengan tanda '*' pada saat Anda menekan tombol TAB "
-"untuk\n"
-"memilih pilihan boot."
-
-#: ../../help.pm_.c:765
-#, fuzzy
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot adalah bootloader untuk hardware Macintosh NewWorld. Yaboot\n"
-"dapat memboot GNU/Linux, MacOS, atau MacOSX bila ada di dalam komputer ini.\n"
-"Biasanya yaboot dapat mendeteksi keberadaan sistem operasi tersebut di dalam "
-"komputer\n"
-"dengan tepat dan langsung menginstallnya. Bila ternyata hal ini tidak "
-"berlaku di komputer Anda\n"
-"silakan tambahkan saja entri sistem operasi yang Anda miliki itu secara "
-"manual pada layar ini.\n"
-"Mohon hati-hati dalam menambahkan parameter-parameter dengan benar.\n"
-"\n"
-"\n"
-"Pilihan utama Yaboot adalah:\n"
-"\n"
-"\n"
-"  - Pesan Init: pesan teks yang akan ditampilkan sebelum boot prompt.\n"
-"\n"
-"\n"
-" - Device boot: Ini adalah tempat Anda hendak memboot GNU/LInux Anda. "
-"Biasanya Anda sudahmemilki\n"
-"partisi bootstrap yang sudah disiapkan untuk keperluan ini.\n"
-"\n"
-"\n"
-" - Delay Open Firmware: Tidak seperti LILO, ada dua macam delay yang "
-"tersedia untuk yaboot.\n"
-"delay pertama diukur dalam detik dan di sini Anda bissa memilih CD, boot OF, "
-"MacOS, atau Linux\n"
-"\n"
-"\n"
-" - Timeout boot kernel: Timeout ini mirip dengan delay boot pada LILO.\n"
-"Setelah memilih Linux, Anda akan disuguhkan pada delay ini yang diukur dalam "
-"0.1 detik sebelum\n"
-"kernel default akan dipilih secara otomatis.\n"
-"\n"
-"\n"
-" - Aktifkan boot CD?: Bila Anda memilih ini, Anda akan diperkenankan untuk "
-"memilih 'C' (singkatan dari CD)\n"
-"saat prompt boot pertama.\n"
-"\n"
-"\n"
-" - Aktifkan boot OF?: Bila Anda memilih ini, Anda bisa memilih 'N' untuk "
-"memilih Open Firmware saat \n"
-"boot pertama\n"
-"\n"
-"\n"
-" - OS Default: Anda dapat memilih OS yang akan diboot secara default bila "
-"delay Open Firmware telah\n"
-"terlampaui."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Pilih harddrive yg akan dihapus utk disediakan bagi partisi\n"
-"Linux Mandrake. Hati-hati, semua data di situ akan hilang dan\n"
-"tak dapat dikembalikan seperti semula."
-
-#: ../../help.pm_.c:832
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Pilih \"OK\" bila Anda ingin menghapus semua data dan partisi yang ada di "
-"hard drive ini. Hati\n"
-"hati setelah mengklik \"OK\" Anda tidak dapat mengembalikan data dan partisi "
-"yang ada di drive\n"
-"ini termasuk data windows.\n"
-"\n"
-"\n"
-"Pilih \"Batal\" untuk membatalkan aksi ini tanpa kehilangan data dan partisi "
-"yang ada dalam\n"
-"hard drive ini."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Anda memilih server berikut: %s\n"
-"\n"
-"Server ini aktif sesuai standar. Sementara ini tiada kabar ttg sekuritas,\n"
-"tapi mungkin ada yg telah ditemukan. Jika terjadi, upgrade-lah selekas "
-"mungkin.\n"
-"\n"
-"Jadi instal server ini?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Tanpa domain NIS, broadcast tak dapat dipakai"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Masukkan disket yang sudah diformat dengan tipe FAT di drive %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Disketnya belum diformat dengan sistem FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Untuk menggunakan pilihan paket yang sudah disimpan sebelumnya, bootlah "
-"instalasi dengan pilihan ''linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Error saat membaca file %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Ada hardwaare di komputer ini yang membutuhkan driver ``proprietary''.\n"
-"Anda bisa mencari informasinya di: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Pilih dulu partisi rootnya.\n"
-"Caranya, buatlah partisi (atau pilih di yang sudah ada).\n"
-"Lalu pilih ``Mount point'' dan set ke `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Anda harus buat partisi swap"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Anda belum punya partisi swap\n"
-"\n"
-"Jalan terus?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Anda harus punya partisi FAT termount pada /boot/efi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Gunakan space bebas"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Tidak ada cukup ruangan untuk mengalokasikan partisi baru"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Gunakan partisi yang sudah ada"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Tidak ada partisi yang bisa digunakan"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Gunakan partisi windows untuk loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Partisi mana yang hendak dipakai oleh Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Pilih ukurannya"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Ukuran partisi root dalam MB: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Ukuran partisi swap dalam MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Gunakan space bebas pada partisi windows"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "partisi mana yang mau Anda ubah ukurannya?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Sedang menghitung bound filesystem windows"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Saya tidak dapat mengubah ukuran partisi FAT ini,\n"
-"Ada error ini yang terjadi: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Partisi windows Anda terlalu terfragmen, jalankan ``defrag'' dulu"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"AWAS!\n"
-"\n"
-"DrakX sekarang hendak mengubah ukuran partisi windows Anda. Hati-hati:\n"
-"proses ini amat berbahaya. Bila Anda belum melakukannya, silakan\n"
-"keluar dari proses instalasi ini, lalu reboot ke windows\n"
-"untuk scandisk dulu (dan defrag juga) di partisi ini lalu backup datanya.\n"
-"Habis itu yakin dulu, baru tekan Ok."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Tentukan ukuran untuk menyimpan windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "Partisi %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Resize FAT gagal: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Tidak ada partisi FAT untuk diubah ukurannya atau untuk digunakan sebagai "
-"loopback (atau tidak ada cukup ruangan)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Hapus semua disk"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Buang windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Anda punya beberapa harddisk, yang mana yang ingin di-instal linux?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "SEMUA partisi yang ada beserta data pada drive %s akan hilang"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Lakukan partisi disk secara custom"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "gunakan fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Anda bisa buat partisi %s \n"
-"Habis itu, jangan lupa simpan dengan menekan tombol `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Eh, Anda tak punya cukup ruangan pada partisi windows!"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Aduh, ruangannya tak cukup nih untuk menginstall"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Wizard partisi DrakX menemukan solusi berikut:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Proses partisi gagal: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Up-kan Jaringan"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Matikan Jaringan"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ada error nih, tapi aku tak tahu cara mengatasinya.\n"
-"Lanjutkan saja, tapi resiko tanggung sendiri yah."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Lokasi mount %s ada dua"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Ada paket yang penting tak benar diinstalnya.\n"
-"Mungkin saja drive cdrom atau cdromnya yang rusak.\n"
-"Cek dulu cdromnya di komputer yang sudah terinstall Linux dengan\n"
-"perintah \"rpm -qpl Mandrake/RPMS/*.rpm\" dulu gih\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Selamat Datang di %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Wah maaf nih, tak ada floppy drive yah ?"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Memulai langkah `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Pilih ukuran yang akan diinstal"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Ukuran total: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versi: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Ukuran: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Pilih paket yang akan diinstal"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Info"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Instal"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Sedang melakukan instal"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Silakan tunggu, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Sisa waktu "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Total waktu"
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Sedang menyiapkan instalasi"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Sedang instal paket %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Cuek aja?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Ada error mengurutkan paket"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Gunakan konfigurasi X11 yang ada?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Sumber daya sistem Anda rendah. Nantinya Anda akan sulit menginstal\n"
-"Linux-Mandrake. Cobalah instalasi text. Untuk hal ini silakan\n"
-"tekan `F1' saat booting pada CDROM, lalu ketikkan `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Kelas Instal"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Ehm, silakan pilih kelas instalasi di bawah:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ukuran total grup yang dipilih kira-kira %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Kalau Anda mau nginstall dengan ukuran yang lebih kecil dari ini,\n"
-"pilih dulu persentase paket yang hendak diinstall.\n"
-"\n"
-"Persentasi kecil berarti akan install paket yang penting-penting saja;\n"
-"dan sebaliknya persentase 100%% akan install semua paket yang tadi sudah\n"
-"dipilih"
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Anda punya hard disk cuma cukup untuk sekitar %d%% dari seluruh paketini.\n"
-"\n"
-"Kalau Anda mau nginstall dengan ukuran yang lebih kecil dari ini,\n"
-"pilih dulu persentase paket yang hendak diinstall.\n"
-"Persentasi kecil berarti akan install paket yang penting-penting saja;\n"
-"dan sebaliknya persentase %d%% akan install paket yang tadi sudah\n"
-"dipilih sebanyak-banyaknya"
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Anda akan bisa memilih dengan lebih lengkap nanti"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Persentase paket yang akan diinstall"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Pilihan Grup Paket"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Pilih paket sendiri"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ukuran total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Paket Error"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nama: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Derajat: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Anda tak bisa pilih paket ini sebab tak ada ruang kosong untuk menginstallnya"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Paket ini yang akan diinstall"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Paket berikut adalah yang akan dihapus"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Anda tak bisa pilih/buang paket ini"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Paket ini harus diinstall, tak bisa dibuang"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Anda tak bisa buang paket ini, sebab dia sudah diinstall"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Paket ini mesti diupgrade\n"
-"Benar tak mau dipilih?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Anda tak bisa buang paket ini. dia mesti diupgrade"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Tunjukkan paket yang sudah dipilih secara otomatis"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Muat/Simpan di floppy"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "Update pilihan paket"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "Instalasi minimal"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Perkiraan"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Tunggu ya, saya sedang menyiapkan instalasi"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d paket"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Peringatan\n"
-"\n"
-"Mohon dibaca dulu semua ketentuan di bawah. Bila Anda tidak setuju dengan "
-"salah satu bagiannya\n"
-"Anda tidak dapat menginstal media CD berikutnya. Silakan tekan 'Tolak' untuk "
-"melanjutkan instalasi\n"
-"tanpa menggunakan media ini.\n"
-"\n"
-"\n"
-"Ada beberapa komponen yang ada di media CD berikutnya tidak dilepas dalam "
-"lisensi GPL atau perjanjian\n"
-"sejenis. Komponen-komponen itu diatur dalam ketentuan dan kondisi dalam "
-"lisensi yang bersangkutan.\n"
-"Baca dengan hati-hati dan penuhi setiap lisensi sebelum Anda menyebarkan "
-"komponen tersebut.\n"
-"Model lisensi tersebut akan melarang proses transfer, duplikasi (kecuali "
-"untuk alasan backup), penyebaran\n"
-"kembali, rekayasa ulang, de-assembly, de-kompilasi, atau modifikasi pada "
-"komponen tersebut.\n"
-"Tiap pelanggaran pada perjanjian akan segera mengakhiri hak-hak Anda dalam "
-"lisensi tersebut.\n"
-"Kecuali bila dibolehkan, Anda tidak dapat menginstall program ini dalam "
-"lebih dari satu sistem\n"
-"atau menggunakannya di jaringan. Bila Anda masih ragu, silakan huibungi "
-"langsung distributor\n"
-"atau editor komponen ini. Anda dilarang mentransfer komponen ini ke pihak "
-"ketiga atau mengkopinya.\n"
-"\n"
-"\n"
-"Semua hak pada komponen di media CD berikutnya dimiliki oleh pembuatnya "
-"masing-masing\n"
-"dan dilindungi oleh hukum hak cipta dan hak intelektual khusus untuk program "
-"komputer.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Baiklah"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Tolak"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Ganti CDROM!\n"
-"\n"
-"Silakan masukkan CDROM berlabel \"%s\" di drive Anda dan tekan OK\n"
-"Kalau Anda tak punya CDROM ini, tekan Batal aja untuk membatalkan instalasi "
-"dari CD ini."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Ada error saat menginstall paket"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Ada error"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Persetujuan Lisensi"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Linux-"
-"Mandrake distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Linux-Mandrake distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Linux-Mandrake sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Keyboard"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Pilih keyboard Anda"
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Ini adalah daftar keyboard yang tersedia"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Kelas instalasi yang anda diinginkan?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Instal/Update"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Akan instal atau update?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Disarankan"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Pakar"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Update"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Tipe mouse yang anda punya?"
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Port Mouse"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Di serial port mana mouse Anda dicolokkan ?"
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Emulasi tombol"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Emulasi 2 tombol"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Emulasi tombol 3"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurasikan card PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "konfigurasi IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "Tidak ada partisi"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Mendeteksi partisi untuk mencari lokasi mount"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Pilih lokasi mount"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Saya tak bisa baca tabel partisi, udah hancur lebur nih :(\n"
-"Aku akan coba hapus partisi yg jeleknya (SEMUA DATA akan HILANG).\n"
-"Solusi lainnya adalah jangan biarkan saya memodifikasi tabel partisi.\n"
-"(pesan errornya adalah %s)\n"
-"\n"
-"Anda setuju untuk menghapus semua partisi?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake gagal membaca tabel partisi Anda.\n"
-"Lanjutkan tapi resiko tanggung sendiri!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Tiada ruang 1MB utk bootstrap! Instal akan berlanjut, tetapi utk mem-boot "
-"sistem, Anda perlu membuat partisi bootstrap di DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "Tiada partisi root tertemukam utk upgrade"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Partisi root"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Manakah partisi root (/) di sistem Anda?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Anda harus reboot agar perubahan table partisi dapat berlaku"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Pilih partisi yang akan diformat"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Periksa bad blok?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Melakukan format partisi"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Membuat dan memformat file %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Instalasi tidak bisa diteruskan karena swap kurang, tambahin dong"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Sedang mencari paket yang tersedia"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Mencari paket untuk diupgrade"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "Sistem ini tak punya cukup space untuk install atawa upgrade (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Lengkap (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Disarankan (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Customized"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Pilih muat/simpan seleksi paket di floppy.\n"
-"Formatnya sama dengan floppy buatan auto_install."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Muat dari floppy"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Memuat dari floppy"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Pilihan paket"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "Masukkan disket yg berisi seleksi paket"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Simpan di floppy"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Ukuran terpilih melebihi area yg ada"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Kalau Anda punya semua CD pada daftar di bawah, tekan OK.\n"
-"Kalau tak punya sama sekali, click Cancel.\n"
-"Kalau cuma punya beberapa aja, pilih aja, trus klik Ok."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Label CD-ROM \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Sedang instal paket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Konfigurasi Instalasi akhir"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Masukkan floppy boot ke drive %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Masukkan disket Update Modules ke drive %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Anda sekarang bisa mendownload software khusus untuk enkripsi.\n"
-"\n"
-"PERHATIAN:\n"
-"\n"
-"Berhubung adanya peraturan yang berbeda di berbagai lokasi berkenaan\n"
-"dengan penggunaan software ini, Anda dan/atau end user yang akan\n"
-"menggunakan software ini harus memastikan bahwa dirinya boleh untuk\n"
-"mendownload dan/atau menggunakan software ini sesuai dengan hukum\n"
-"yang berlaku di lokasinya.\n"
-"\n"
-"Juga ditekankan bahwa Anda dan/atau end user harus sadar bahwa dirinya\n"
-"tidak diperkenankan untuk melanggar hukum tersebut. Apabila melanggar\n"
-"akan dikenakan sangsi yang berat.\n"
-"\n"
-"Mandrakesoft dan para pembuat software dan/atau penyedianya sama sekali "
-"tidak\n"
-"bertanggung jawab baik untuk segala kerusakan khusus, tidak langsung, dan\n"
-"insidentil apapun (termasuk namun tidak terbatas pada kehilangan keuntungan\n"
-"gangguan bisnis, kehilangan data komersial dan kerugian lain dan \n"
-"segala kewajiban yang harus dibayarkan sesuai hukum) yang disebabkan\n"
-"oleh penggunaan, kepemilikan, atau penjualan dari software yang\n"
-"didownload ini, setelah Anda dan/atau end user memiliki akses\n"
-"ke software tersebut setelah menandatangani perjanjian yang ada.\n"
-"\n"
-"Apabila ada pertanyaan mengenai perjanjian ini, silakan hubungi\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Pilih mirror tempat Anda ingin mengambil paket program"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Saya sedang mencek mirror untuk mengambil daftar paket yang tersedia"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Pilih paket yang akan diinstal"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Pilih timezone Anda"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "Jam hardware diset ke GMT"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "sinkronisasi waktu otomatis (dg NTP)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "Server NTP"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "server CUPS remote"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Tidak ada printer"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Ringkasan"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Mouse"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Timezone"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Printer"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "kartu ISDN"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Sound Card"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV Card"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "File lokal"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Set password root"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Tak berpassword"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Passwordnya terlalu mudah (harus paling tidak %d karakter)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Autentikasi"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "Otentikasi LDAP"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "Basis dn LDAP"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "Server LDAP"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "Otentikasi NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "Domain NIS"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "Server NIS"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Bootdisk baru membantu Anda untuk melakukan boot sistem Linux tanpa\n"
-"tergantung pada bootloader. Kadang ini berguna bila Anda tidak mau install\n"
-"SILO  di sistem Anda, atau saat sistem operasi lain menghapus SILO, atau "
-"SILO\n"
-"tidak bisa digunakan pada konfigurasi hardware Anda. Bootdisk ini juga bisa "
-"digunakan\n"
-"dengan image rescue Mandrake, yang memudahkan kita untuk merecover sistem\n"
-"dari kegagalan. Sekarang, saya mau tanya nih... mau bikin bootdisk nggak ?"
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Drive Disket Pertama"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Drive disket kedua"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Lewatkan"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Bootdisk baru membantu Anda untuk melakukan boot sistem Linux tanpa\n"
-"tergantung pada bootloader. Kadang ini berguna bila Anda tidak mau install\n"
-"lilo (ataw grub) di sistem Anda, atau saat sistem operasi lain menghapus "
-"lilo, atau lilo\n"
-"tidak bisa digunakan pada konfigurasi hardware Anda. Bootdisk ini juga bisa "
-"digunakan\n"
-"dengan image rescue Mandrake, yang memudahkan kita untuk merecover sistem\n"
-"dari kegagalan. Sekarang, saya mau tanya nih... mau bikin bootdisk nggak ?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Tiada floppy drive tersedia"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Pilih drive floppy untuk membuat bootdisk"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Masukkan disket di drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Membuat bootdisk"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Membuat bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Nampaknya Anda punya mesin DuniaLama/TakJelas.\n"
-"Bootloader yaboot takkan bekerja.\n"
-"Instal akan berlanjut, tapi Anda perlu memakai\n"
-"BootX utk mem-boot mesin Anda"
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Ingin pakai aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Ada error saat install aboot,\n"
-"paksakan instalasi walau merusak partisi awal?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Install bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalasi bootloader gagal. Ada kesalahan berikut:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Ganti dulu bootdevice Open Firmware untuk mengaktifkan bootloader.\n"
-"Jika Anda ngga ngeliat prompt bootloadernya waktu reboot,tekan Command-"
-"Option-O-F saat reboot lalu tekan Enter\n"
-"setenv boot-device $of_boot,\\\\:tbxi\n"
-"lalu ketikkan: shut-down\n"
-"Pada boot selanjutnya prompt bootloader akan ditampilkan deh."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Lemah"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Sedang"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Kuat"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Pilih Tingkat Security"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Masukkan disket kosong di drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Lagi buat disket auto install"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Ada tahapan yang tidak diselesaikan.\n"
-"\n"
-"Anda ingin keluar sekarang?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Selamat, instalasi selesai.\n"
-"Sekarang cabut media boot dan pencet Return/Enter untuk reboot.\n"
-"Untuk informasi update program untuk rilis Linux Mandrake ini,\n"
-"silakan lihat Errata di http://www.linux-mandrake.com/.\n"
-"Informasi untuk konfigurasi sistem juga tersedia di \n"
-"bab Instalasi di Buku Petunjuk Resmi Linux Mandrake."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Buat floppy instalasi otomatis"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Bila Anda mau, auto install bisa dilakukan secara otomatis penuh,\n"
-"jadi instalasinya akan mengusai hard drive!\n"
-"(ini dimaksudkan untuk menginstall pada komputer lain)\n"
-"\n"
-"Mungkin Anda perlu mengulangi instalasinya.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Otomatis"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Ulang"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Simpan paket yang sudah dipilih"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalasi Linux Mandrake %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> untuk pindah | <Spasi> untuk pilih | <F12> Layar berikut"
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu hilang"
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "Pilih maunya apa"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Advanced"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Tunggulah"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Buka Tree"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Tutup Tree"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Togel tampilan rata dan terurut grupnya"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Tak jelas (%s), coba lebih detil\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Pilihan salah, silakan ulangi\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (default %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Pilihan anda? (default %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Pilihan anda? (default %s  pilih 'none' untuk tidak ada) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Ceko (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Jerman"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Spanyol"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Finland"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Perancis"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norwegia"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Polandia"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Rusia"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Swedia"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Keyboard UK"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "Keyboard US"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Albania"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armenia (lama)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armenia (mesintik)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armenia (fonetik)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaijan (latin)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belgia"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulgaria"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazil (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Belarusia"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Swis (layout Jerman)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Swis (layout Prancis)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Ceko (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Jerman (tanpa dead key)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Denmark"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegia)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estonia"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgia (layout \"Rusia\")"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgia (layout \"Latin\")"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Yunani"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Hungaria"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Kroasia"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Ibrani"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Ibrani (fonetik)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iran"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islandia"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Itali"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Jepang 106 tombol"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Keyboard Korea"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Amerika Latin"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lithuania AZERTY (lama)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lithuania AZERTY (baru)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lithuania \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lithuania \"phonetic\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "Lokasi"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Macedonia"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Belanda"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Polandia (layout qwerty)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Polandia (layout qwertz)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugis"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Quebec)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Romanian (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Romanian (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Rusia (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Slovenia"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakia (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakia (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaijan (cyrillic)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Keyboard Thailand"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Keyboard Thailand"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turki (model \"F\" tradisional)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turki (model \"Q\" modern)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukrania"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "Keyboard US (internasional)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnam \"numeric row\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavia (latin/cyrillic)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Mount melingkar %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Hapus dulu volume logiknya\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Mouse Sun"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standar"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Mouse PS2 wheel generik"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 tombol"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Generik"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "wheel"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "serial"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Mouse Generik 2 Tombol"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Mouse Generik 3 Tombol"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Sistem Mouse (serial)"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serial, old C7 type)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 tombol"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 tombol"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "tiada"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Tidak pakai mouse"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Silakan di test mousenya"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Untuk mengaktifkan mouse,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "gerakan rodanya!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Selesai"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Lanjutkan ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Tahap sebelumnya"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Apa sudah sesuai?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Hubungan ke Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Cara yang umum untuk terkoneksi ke adsl adalah dengan menggunakan pppoe.\n"
-"Namun ada juga yang menggunakan pptp, dan ada yang pakai dhcp saja.\n"
-"Bila ragu, pilih saja 'gunakan pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "gunakan dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "gunakan pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "gunakan pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Klien dhcp mana yang ingin Anda pakai?\n"
-"defaultnya adalah dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Tidak ada adapter jaringan ethernet yang terdeteksi di sistem ini.\n"
-"Saya jadinya tidak dapat mengkonfigurasikan tipe koneksi ini deh."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Pilih interface jaringan"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Pilih adapter jaringan yang akan digunakan untuk terhubung ke Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "Tidak ada card network ya?"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Konfigureasi jaringan"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Masukkan nama komputernya karena ada server DHCP yang mengharuskan adanya "
-"hostname ini.\n"
-"Hostname (nama komputer) sebaiknya merupakan nama host yg fully-qualified\n"
-"misalnya ``samson.ciawi.mdamt.net''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Nama Host"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Wizard Konfigurasi Jaringan"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem ISDN external"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "card ISDN Internal"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Tipe koneksi ISDN apa yang Anda miliki?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Konfigurasi ISDN mana yg Anda suka?\n"
-"\n"
-"* Konfigurasi lama menggunakan isdn4net, berisi alat perkasa,\n"
-"  tetapi tricky bagi pemula, dan tidak standar.\n"
-"\n"
-"* Konfigurasi baru lebih mudah dimengerti, lebih standar,\n"
-"  tapi dg alat lebih sedikit.\n"
-"\n"
-"Kami sarankan konfigurasi ringan.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Konfigurasi baru (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Konfigurasi lama (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "konfigurasi ISDN"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Pilih provider Anda.\n"
-"Bila tidak ada dalam daftar, pilih Tidak Terdaftar"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protokol Boot"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Eropa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Tempat-tempat lain"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Tempat-tempat lain \n"
-" tanpa D-Channel (leased lines)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Protokol apa yang ingin Anda gunakan?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Tipe card mana yang anda punya?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Saya tak tahu"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Bila Anda punya card ISA, konfigurasi pada layar berikut nanti harusnya "
-"sudah benar.\n"
-"\n"
-"Bila Anda punya card PCMCIA, Anda harus mengetahui irq dan io card Anda "
-"itu.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Batal"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Lanjut"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Manakah card ISDN Anda?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Saya mendeteksi adanya sebuah card ISDN PCI, tapi saya tidak tahu tipenya. "
-"Silakan pilih card PCI tersebut pada layar berikutnya."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Tiada kartu PCI ISDN ditemukan. Pilihlah satu pd layar berikut."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Di serial port mana modem Anda terhubung?"
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Parameter Dialup"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Nama koneksi"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Nomor telepon"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Script-based"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Terminal-based"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Nama domain"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Server DNS Primary (boleh diisi/tidak)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Server DNS Sekondari (boleh tidak diisi)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Anda bisa putuskan atau konfigurasi koneksi yang ada sekarang."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Anda bisa mengkonfigurasikan ulang koneksi ini"
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Sekarang Anda sedang terhubung ke Internet."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Anda bisa sambungkan koneksi ke Internet atau mengkonfigurasikan ulang."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Anda sedang tidak terhubung ke Internet."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Sambungkan koneksi Internet"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Putuskan koneksi Internet"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Konfigureasikan koneksi jaringan (LAN atau Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Koneksi dan konfigurasi Internet"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Kita akan mengkonfigurasi koneksi %s."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Konfigurasi koneksi %s.\n"
-"\n"
-"\n"
-"Tekan OK utk mulai."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Konfigurasi Jaringan"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Jaringan Anda sudah terkonfigurasi lho\n"
-"Silakan klik OK untuk rekonfigurasi ulang koneksi jaringan/internet ini, "
-"atau batal jika Anda berubah pikiran.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Selamat Datang di Wizard Koneksi Jaringan\n"
-"\n"
-"Sekarang kita akan mengkonfigurasikan internet/jaringan.\n"
-"Bila Anda tidak mau menggunakan deteksi otomatis, mohon untuk tidak memilih "
-"checkbox.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Pilih profil yang hendak Anda konfigurasikan"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Gunakan deteksi otomatis"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Mendeteksi alat..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Konfigurasi koneksi modem biasa "
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "dideteksi pada port %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "Konfigurasi koneksi ISDN"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "%s telah terdeteksi"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "Koneksi ADSL"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "telah dideteksi ada pada interface %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Konfigurasi jaringan kabel"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "Koneksi kabel terdeteksi"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "konfigurasi LAN"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "ada ethernet card yang terdeteksi"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Pilih koneksi yg hendak dikonfigurasi"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Anda mengkonfigurasi bbrp jalan utk koneksi Internet.\n"
-"Pilih yg ingin Anda pakai.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Koneksi Internet"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Anda mau jalankan koneksi ini saat boot?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Konfigurasi Jaringan"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Problem terjadi saat restart netword:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Selamat deh., jaringan dan internet telah dikonfigurasikan.\n"
-"\n"
-"Konfigurasi yang tadi telah dilakukan sekarang akan dijalankan di sistem "
-"ini.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Setelah itu, silakan restart X Anda agar bebas dari masalah pergantian\n"
-"nama host."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"AWAS: device ini sebelumnya telah dikonfigurasikan untuk terhubung ke "
-"Internet.\n"
-"Tekan OK untuk tetap menggunakan konfigurasi lama.\n"
-"Bila ingin menggantinya, silakan ganti isi pada kolom-kolom di konfigurasi "
-"ini."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Masukkan konfigurasi IP untuk mesin ini.\n"
-"Tiap item harus diberikan sebagai alamat IP dalam notasi decimal\n"
-"bertitik (misalnya 202.159.35.32)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurasi perangkat jaringan %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "Alamat IP"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "IP otomatis"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Alamat IP harus dalam format 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Masukkan nama komputernya.\n"
-"Hostname (nama komputer) sebaiknya merupakan nama host yg fully-qualified\n"
-"misalnya ``mdamt.fdns.net''.\n"
-"Anda juga bisa masukkan alamat IP gatewaynya kalau ada"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "Server DNS"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Device Gateway"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Konfigurasi proxy"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Proxy biasanya http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Proxy biasanya ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Konfigurasi Internet"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Anda ingin tes koneksi Internet sekarang?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Testing koneksi ini..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Sistem ini sekarang terhubung ke Internet."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Untuk alasan keamanan, sekarang akan diputus koneksinya"
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Sistem ini sepertinya tidak terhubung ke Internet deh.\n"
-"Cobalah konfigurasikan ulang koneksinya."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Konfigurasi Koneksi"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Silakan isi atau cek kolom berikut"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ card"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Mem card (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "IO Card"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "IO_0 card"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "IO_1 card"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Nomor telepon Anda"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Nama provider (misalnya provider.net.id)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Nomor telepon provider"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "DNS Provider 1 (boleh diisi boleh tidak)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "DNS Provider 2 (boleh diisi boleh tidak)"
-
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "Pilih keyboard"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "mode dial"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Laju koneksi"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Waktu koneksi: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Login Account (username)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Password Account"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Partisi extended tak bisa dipakai di platform ini"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Anda punya tabel partisi tapi tidak bisa saya gunakan.\n"
-"Satu-satunya cara adalah memindahkan partisi primary Anda ke partisi\n"
-"extended selanjutnya"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Proses restore dari file %s gagal: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "File backup rusak"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Error pada saat menulis file %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Ada sesuatu yang buruk terjadi pada drive Anda,\n"
-"hal ini saya ketahui saat gagal mengecek integritas data di situ.\n"
-"Artinya, data apapun yang ditulis ke situ akan gagal."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "harus ada"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "penting"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "bagus deh"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bagus"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "hmm.."
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Printer lokal"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "printer remote"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "server CUPS remote"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Server lpd remote"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Printer jaringan (socket)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Server Printer"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Device Printer URI"
-
-#: ../../printer.pm_.c:48
-#, fuzzy
-msgid "Pipe job into a command"
-msgstr "Pipe ke perintah"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(module %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Pilih koneksi Printer"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Bagaimana printer ini disambung ke komputer?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"Dengan server CUPS remote, Anda tidak perlu mengkonfigurasikan\n"
-"printer di sini; printer akan secara otomatis dideteksi.\n"
-"Bila ragu, pilih saja \"server CUPS Remote\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-#, fuzzy
-msgid "None"
-msgstr "Selesai"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Pilih user default:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Tutup"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "printer remote"
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Alamat IP harus dalam format 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Nomor port harus berupa angka"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "Printer lokal"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "IP server CUPS"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Konfigurasi Tipe Boot"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Mendeteksi alat..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Tes port"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Printer dengan tipe \"%s\" telah terdeteksi di "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Alat printer lokal"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Device mana yang terhubung ke printer\n"
-"(ingat, /dev/lp0 = LPT1:) ?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Device Printer"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "Nama device/file hilang!"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Saya sedang membaca database driver CUPS..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Pilihan printer lpd remote"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Untuk dapat mencetak ke antrian lpd remote, Anda perlu\n"
-"tuliskan nama host server printer dan nama antrian\n"
-"di server itu."
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nama Host Remote"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "printer remote"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "Nama host remote hilang!"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nama host remote hilang!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Pilihan printer SMB (windows 95/NT)"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Untuk dapat mencetak ke Printer SMB, Anda perlu \n"
-"memberitahu saya nama host SMB (biasanya tidak selalu\n"
-"sama dengan nama host TCP/IPnya) dan juga alamat IP server printer,\n"
-"dan juga nama share printer tersebut, oh iya...\n"
-"nama user, password, dan info workgroupnya juga."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "Host server SMB"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "IP server SMB"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Nama share"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Workgroup"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Harus ada nama/IP server!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "Nama share Samba hilang!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "Pilihan printer NetWare"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Kalau ingin mencetak pakai printer NetWare, sekarang coba\n"
-"beritahu saya nama server printer NetWarenya (tidak selalu sama \n"
-"dengan nama TCP/IPnya lho) juga nama antrian printer yang \n"
-"Anda ingin gunakan beserta nama user dan passwordnya."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Server Printer"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Nama antrian printer"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "Nama server NCP hilang!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "Nama antrian NCP hilang!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Pilihan printer socket"
-
-#: ../../printerdrake.pm_.c:528
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Untuk mencetak ke printer soket, Anda perlu menuliskan\n"
-"hostname printer itu dan juga nomor portnya."
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "Hostname Printer"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "Nama host printer hilang!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Device Printer URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Anda dapat menset langsung URI utk akses printer. URI harus memenuhi "
-"spesifikasi CUPS/Foomatic. Ingat, tak semua tipe URI di-support oleh semua "
-"spooler."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "Harus diisi URI valid!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Tiap printer perlu nama (misal: lp).\n"
-"Kolom Penjelasan / Lokasi tak harus terisi.\n"
-"Itu komentar utk user."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Nama Printer"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Keterangan"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Lokasi"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Saya sedang membaca database driver CUPS..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "Seleksi model printer"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "Anda punya model printer mana?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Konfigurasi Internet"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Konfigurasi Internet"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, fuzzy, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Port harus berupa integer"
-
-#: ../../printerdrake.pm_.c:1094
-#, fuzzy, c-format
-msgid "Option %s must be a number!"
-msgstr "Port harus berupa integer"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Ingin tes cetak?"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "Tes port"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-#, fuzzy
-msgid "No test pages"
-msgstr "Ya, Test cetak postscript dan text ascii"
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "Printer"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "Tool Standard"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Saya sedang tes cetak..."
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "Saya sedang tes cetak..."
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Saya sedang tes cetak..."
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Halaman test telah dikirim ke daemon printer.\n"
-"Akan butuh waktu sebentar untuk mulai mencetak.\n"
-"Status cetak:\n"
-"%s\n"
-"\n"
-"Tercetak baik?"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Halaman test telah dikirim ke daemon printer.\n"
-"Akan butuh waktu sebentar untuk mulai mencetak.\n"
-"Tercetak baik?"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Tidak ada printer"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Matikan Jaringan"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "Opsi printer"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Saya sedang membaca database driver CUPS..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Konfigurasi Internet"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Nama printer harus hanya berupa huruf, angka, atau garisbawah"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "Tidak ada printer"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Saya sedang membaca database driver CUPS..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "konfigurasi Lilo/Grub"
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Mulai koneksi..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Konfigurasi jaringan"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor tidak dikonfigurasi"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Konfigureasi jaringan"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Sistem printer mana yang ingin digunakan?"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Kuat"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Pengecut"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Sistem printer mana yang ingin digunakan?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Pilih spooler printer"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Sistem (spooler) printer mana yang ingin digunakan?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigurasi Printer"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Opsi printer"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Saya sedang membaca database driver CUPS..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "Ingin konfigurasi printer?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Modus normal"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Default)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "server CUPS remote"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "server CUPS remote"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Tambah printer"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Anda ingin test konfigurasi ini?"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Konfigurasi Internet"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Koneksi Internet"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Seleksi model printer"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "Saya sedang tes cetak..."
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "printer remote"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Saya sedang membaca database driver CUPS..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Anda ingin restart konfigurasi ini?"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Saya sedang membaca database driver CUPS..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Konfigurasi proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Selamat datang di konfigurator proxy.\n"
-"\n"
-"Anda dapat mengeset proxy http/ftp dengan/tanpa login dan katakunci\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr "Isilah info proxy http, kosongkan jika tak perlu"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url harus berformat 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Bagian port harus berupa angka"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr "Isilah info proxy ftp, kosongkan jika tak perlu"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url harus berformat 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Ketik login proxy dan katakuncinya, jika ada.\n"
-"Biarkan kosong jika tak ingin login/passwd"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "katakunci"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "tulis lagi katakunci"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Katakunci tak sama, coba lagi!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Tidak dapat menambah partisi ke RAID md%d yang terformat"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Tidak bisa menulis ke file %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid gagal"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid gagal (mungkin raidtoolsnya tak ada?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Partisi tidak cukup untuk level RAID %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Luncurkan sistem suara ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Skeduler command periodik, Anacron"
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd digunakan untuk monitoring status batere dan mencatatnya di syslog.\n"
-"apmd juga bisa untuk mematikan mesin waktu baterenya habis."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Menjalankan perintah terjadwal dengan perintah at pada waktu tertentu\n"
-"saat at dijalankan, dan memulai perintah secara batch waktu rata-rata load\n"
-"sedang rendah."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Cron adalah program UNIX standar yang menjalankan program user\n"
-"pada waktu yang terjadwal. vixie cron memiliki fitur yang lebih lengkap\n"
-"dari cron UNIX biasa, termasuk pembenahan sekuriti yang lebih baik dan\n"
-"lebih mantapnya option pada konfigurasinya."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM memberikan akses ke mouse pada aplikasi Linux yang text based semacam\n"
-"Midnight Commander. Dia juga bisa bikin cut-and-paste dengan mouse pada "
-"konsol\n"
-"dan juga bikin menu pop-up di konsol."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake mendeteksi hardware, dan mengkonfigurasi yg baru/berubah bila "
-"perlu."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache adalah server World Wide Web. Dia dipakai untuk menyediakan file\n"
-"HTML dan CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"daemon superserver internet (biasa dipanggil inetd) bertugas untuk\n"
-"menjalankan servis-servis internet yang dibutuhkan. Dia bertanggung jawab\n"
-"atas banyak server, misalnya telnet, ftp, rsh, dan rlogin. Menonaktifkan\n"
-"inetd berarti menonaktifkan semua servis-servis tadi."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Luncurkan filter paket Linux kernel seri 2.2, untuk set-up\n"
-"firewall yang melindungi mesin Anda dari serangan network."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Paket ini akan meload map keyboard yang dipilih di file\n"
-"/etc/sysconfig/keyboard. Mapnya bisa dipilih dari utility kbdconfig.\n"
-"Mending Anda aktifkan aja deh ini."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Regenerasi otomatis header kernel di /boot utk\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Deteksi dan konfigurasi otomatis hardware saat boot."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf kadang bekerja keras saat boot utk perawatan konfigurasi sistem."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd adalah daemon printer yang jadi tulang punggung lpr. Dia\n"
-"bertugas sebagai server yang memberi perintah kepada printer untuk mencetak."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, digunakan utk membangun server dg performans dan\n"
-"kapasitas tinggi."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) adalah Domain Name Server (DNS) yang digunakan untuk\n"
-"menterjemahkan nama host ke IP address."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Mount dan unmount semua Network File System (NFS), SMB (Lan\n"
-"Manager/windows), dan NCP (Netware)."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktif/nonaktifkan semua interface network yang terkonfigurasi nyala\n"
-"pada saat boot."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS adalah protokol populer untuk file sharing lewat network TCP/IP.\n"
-"Servis ini dinyalakan untuk membuat NFS server bisa jalan dengan "
-"menggunakan\n"
-"konfigurasi pada file /etc/exports."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS adalah protokol populer untuk file sharing di TCP/IP\n"
-"Servis ini memberikan fungsi file lock pada NFS."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr "Secara otomatis nyalakan numlock saat boot pada console/XFree."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Support OKI 4w and winprinter kompatibel."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA digunakan untuk menjalankan perangkat semacam ethernet atau modem "
-"pada laptop.\n"
-"Dia tak bisa jalan kecuali dikonfigurasikan di sini, jadi tak apa-apa\n"
-"kalau tak diinstall di mesin yang tak perlu PCMCIA."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper mengelola koneksi RPC, yang digunakan oleh protokol seperti\n"
-"NFS dan NIS. Server portmap harus jalan di mesin yang bertindak sebagai\n"
-"server untuk protokol yang menggunakan mekanisme RPC."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix adalah Mail Transport Agent yang berupa program yang bertugas\n"
-"mengantarkan surat dari suatu mesin ke mesin yang lain."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Menyimpan dan mengembalikan pool entropi sistem untuk membuat\n"
-"angka acak dengan kualitas sangat acak."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Tunjuk raw device ke block devices (misalnya partisi hard drive),\n"
-"utk digunakan oleg aplikasi semacam Oracle"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Daemon routed digunakan untuk update tabel routing IP otomatis liwat\n"
-"protokol RIP. RIP dipakai di jaringan kecil, dan semakin besar jaringannya\n"
-"maka protokol routing yang canggih pun semakin dibutuhkan."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Protokol rstat digunakan pada jaringan untuk mengambil\n"
-"ukuran kinerja sistem di network."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Protokol ruser digunakan di jaringan untuk mengidentifikasi siapa\n"
-"yang lagi login di jaringan."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Protokol rwho digunakan untuk melihat daftar user yang sedang login\n"
-"di suatu sistem yang juga menjalankan daemon rwho (mirip dengan finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Aktifkan sistem suara"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog adalah fasilitas yang digunakan para daemon untuk mencatat\n"
-"pesan log sistem di file. Hidupkan aja deh syslognya."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Muat driver piranti USB"
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Aktifkan Server Font X (agar XFree dapat berjalan)"
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Pilih service mana yang hendak dijalankan saat boot scr otomatis"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "Printer"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "mode sistem"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Pilihan printer lpd remote"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Server, Database"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "servis"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "sedang jalan"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "dihentikan"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Services dan daemon"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Mohon maaf, informasi lengkap\n"
-"tentang layanan ini tidak tersedia."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Saat boot"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Sedang instal paket %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Saya tak bisa baca tabel partisi, udah hancur lebur nih :(\n"
-"Aku akan coba hapus partisi yg jeleknya"
-
-#: ../../standalone/drakautoinst_.c:44
-#, fuzzy
-msgid "Error!"
-msgstr "Ada Kesalahan"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Konfigurasi Instalasi akhir"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Konfigurasi Tipe Boot"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Wah Selamat nih!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Internet Connection Sharing"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internet Connection Sharing sudah aktif"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Konfigurasi Internet Connection Sharing telah seleasi.\n"
-"Namun sekarang sudah aktif.\n"
-"\n"
-"Apa yang ingin Anda lakukan?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "Matikan"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "Selesai"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "Konfigurasi ulang"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Server-server sedang dimatikan"
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Internet Connection Sharing telah dimatikan"
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internet Connection Sharing masih dimatikan"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Konfigurasi Internet Connection Sharing telah seleasi.\n"
-"Namun sekarang masih dimatikan.\n"
-"\n"
-"Apa yang ingin Anda lakukan?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "Aktifkan"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Server-server akan dinyalakan"
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Internet Connection Sharing sudah aktif"
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Komputer ini bisa dikonfigurasikan agar bisa membagi koneksi Internetnya.\n"
-"Dengan cara ini, komputer lain di jaringan lokal bisa menggunakn koneksi\n"
-"Internet milik komputer ini.\n"
-"\n"
-"Perhatikan: Anda mesti punya adapter jaringan untuk mensetup Local Area "
-"Network (LAN)."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (pakai module %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Tidak ada adapter jaringan di sistem ini!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Aduh, tiada adapter jaringan ethernet yang berhasil saya cari di sistem ini. "
-"Silakan jalankan tool konfigurasi hardware deh."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Interface jaringan"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Hanya ada satu adapter jaringan yang dikonfigurasikan di sistem ini:\n"
-"\n"
-"%s\n"
-"\n"
-"Apakah Anda mau melakukan setup Local Area Network untuk adapter itu?"
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Silakan pilih adapter jaringan yang hendak disambung ke Local Area Network "
-"Anda."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Awas, adapter jaringannya sudah dikonfigurasikan nih. Mau dikonfigurasikan "
-"ulang?"
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Ada konflik alamat yang potensial pada LAN yang ada pada konfigurasi "
-"sekarang di %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Saya mendeteksi adanya konfigurasi firewall"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Awas! Ada konfigurasi firewall yang sudah ada nih. Anda nanti perlu mengecek "
-"dan membetulkan dengan cara manual setelah instalasi."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Sedang membuat konfigurasi..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Mengkonfigurasikan skrip, menginstall software, menjalankan server..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Aduh, saya ada masalah saat menginstall paket %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Semuanya sudah dikonfigurasikan.\n"
-"Anda sekarang bisa membagi koneksi Internet dengan komputer-komputer lain "
-"pada Local Area Network di tempat Anda, dengan menggunakan konfigurasi "
-"jaringan otomatis (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Konfigurasi telah seleasi.Namun sekarang masih dimatikan."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Konfigurasi telah selesai.Namun sekarang sudah aktif."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Internet Connection Sharing belum pernah dikonfigurasikan"
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Koneksi dan konfigurasi sharing Internet"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Selamat datang di utiliti Internet Connection Sharing!\n"
-"\n"
-"%s\n"
-"\n"
-"Silakan pencet Konfigurasikan untuk mulai."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Konfigurasi Jaringan (adapter %d)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Hapus profil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Profil yang hendak dihapus:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Buat profil baru..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Nama Host: "
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Akses Internet"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Tipe: "
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Interface: "
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Status: "
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Tersambung"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Belum tersambung"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Sambungkan..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Koneksi diputus"
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Mulai koneksi..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Tutup koneksi..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Koneksi belum ditutup.\n"
-"Cobalah lakukan secara manual sebagai root lalu ketikkan\n"
-"/etc/sysconfig/network-scripts/net_cnx_down"
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Sistem ini sekarang diputus koneksinya"
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Konfigurasi Akses Internet..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "konfigurasi LAN"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Konfigurasi Local Area Network..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Pasang"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Tunggu ya, sedang mengaktifkan konfigurasi"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Tiada interface terkonfigurasi.\n"
-"Konfigurasi dulu dg meng-klik 'Configure'"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "konfigurasi LAN"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Protokol Boot"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Dijalankan saat boot"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "Klien DHCP"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "activate now"
-msgstr "Aktif"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "desactivate now"
-msgstr "Aktif"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Tiada koneksi internet.\n"
-"Buat dulu dg meng-klik 'Configure'"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "konfigurasi koneksi Internet"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "konfigurasi koneksi Internet"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Tipe koneksi"
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parameter"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Card Ethernet"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "Klien DHCP"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Selamat Datang di Crackers"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Lemah"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Pengecut"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Level ini harus hati-hati. Level ini akan membuat sistem Anda akan mudah\n"
-"digunakan, tapi sangat sensitif: mesin ini tidak boleh digunakan untuk\n"
-"mesin yang terhubung ke mesin lain atau ke ke Internet. Tidak akan ada\n"
-"akses password."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr "Password akan diaktifkan, tapi mohon jangan disambungkan ke jaringan."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Ada beberapa peningkatan level security, yang utama adalah ada lebih banyak\n"
-"peringatan dan cek sekuriti yang lebih ketat."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Ini adalah standard sekuriti yang dianjurkan untuk komputer yang akan\n"
-"digunakan untuk terkoneksi ke Internet sebagai klien. Akan ada cek sekuriti\n"
-"dulu nih."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Dengan level sekuriti ini, sistem akan dapat digunakan sebagai server.\n"
-"Sekuritinya akan lebih tinggi lagi untuk dapat melayani koneksi klien\n"
-"dengan lebih aman."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Kita akan pakai fitur 4 level, tapi sekarang sistem akan sepenuhnya "
-"ditutup.\n"
-"Fitur sekuriti sekarang sudah maksimum."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "Pilih Tingkat Security"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Pilih opsi server"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Pilih Tingkat Security"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Pusat Kontrol"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Pilih tool yang hendak digunakan"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "cara pakai: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Ingin membuat tombol BackSpace menjadi Delete dalam konsol?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Ganti CDROM"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Masukkan CDROM Instalasi di drive Anda dan tekan OK\n"
-"Jika tak punya, tekan Batal untuk hindari upgrade live."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Gagal memulai upgrade live !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "tiada serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Emulasikan tombol ketiga?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "konfigurasi firewall"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "konfigurasi firewall"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Anda sudah ada firewall.\n"
-"Silakan tekan Konfigurasikan untuk mengganti atau menghapus firewall"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Silakan tekan Konfigurasikan untuk mensetup firewall standar"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Pilih bahasa Anda"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Pilih kelas instalasi"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Deteksi hard disk"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfigurasi mouse"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Pilih keyboard"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sekuriti"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Setup filesystem"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Melakukan format partisi"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Paket yang akan diinstal"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instal sistem"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Tambahkan user"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfigurasi jaringan"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfigurasi service"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Membuat bootdisk"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Install bootloader"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfigurasi X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Keluar dari proses instal"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"konfigurator tinyfirewall\n"
-"\n"
-"Program ini mengkonfigurasi firewall pribadi sistem Linux Mandrake.\n"
-"Untuk membuat solusi firewall yang lebih baik, cobalah\n"
-"distribusi Mandrake Security Firewall"
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Sekarang saya akan tanyakan layanan mana saja yang hendak Anda bolehkan\n"
-"untuk dapat diakses dari Internet. Silakan fikirkan dulu masak-masak akan\n"
-"hal ini, karena keamanan komputer Anda sangat penting kan.\n"
-"\n"
-"Ayo, bila Anda tidak pakai layanan-layanan ini, matikan saja lewat "
-"firewall.\n"
-"Anda bisa ubah konfigurasikan lagi kapan-kapan dengan menjalankan\n"
-"aplikasi ini lagi nantinya."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Apakah Anda ingin webserver Anda juga dapat diakses dari Internet ??\n"
-"Bila Anda ingin webserver Anda HANYA ingin diakses dari KOMPUTER INI SAJA\n"
-"maka jawab saja TIDAK di sini\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Apakah Anda menjalankan Name server di komputer ini? Bila Anda\n"
-"tidak menjalankan nameserver untuk menjawab informasi IP dan zone untuk "
-"Internet\n"
-"silakan jawab TIDAK.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Apakah Anda ingin membuka koneksi Secure Shell (ssh) ?\n"
-"SSH adalah pengganti telnet yang mungkin hendak Anda gunakan.\n"
-"Bila Anda hanya menggunakan telnet sekarang, silakan ganti ke ssh.\n"
-"telnet tidak dienkripsi loh -- jadi orang lain bisa mencuri password Anda\n"
-"saat telnet. SSH dienkripsi dan tidak bisa disadap."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Apakah Anda ingin membuka koneksi telnet?\n"
-"Tapi ini sangatlah tidak aman sebagaimana dijelaskan pada layar sebelumnya.\n"
-"Ayo deh jawab TIDAK dan gunakan SSH saja.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Apakah Anda hendak membuka koneksi FTP yang ingin diakses dari Internet?\n"
-"Bila ya, silakan gunakan saja untuk transfer anonimous. Password yang "
-"dikirimkan\n"
-"oleh FTP bisa dicuri oleh cracker, karena FTP tidak diacak saat pertukaran "
-"password terjadi.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Apakah Anda menjalankan server mail ? Bila Anda mengirimkan email\n"
-"dengan menggunakan pine, mutt, atau klien mail teks, maka sebaiknya iya.\n"
-"Selainnya, matikan saja deh.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Apakah Anda menjalankan server POP atau IMAP ?\n"
-"Fasilitas ini bisa digunakan untuk menampung account email non web untuk\n"
-"umum.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Wah, Anda pakai kernel 2.2 yah... Bila IP jaringan Anda diset sendiri\n"
-"oleh komputer di kantor atau rumah (secara dinamis)\n"
-"maka kita harus jawab YA di sini. Benar tak demikian?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Apakah komputer Anda mendapatkan informasi jam dari komputer lain?\n"
-"Biasanya, fasilitas ini digunakan oleh organisasi sedang/besar Unix/Linux\n"
-"untuk sinkronisasi waktu untuk logging dan sebagainya. Bila Anda\n"
-"tidak tergabung dari kantor yang besar atau belum pernah dengar ini "
-"sebelumnya.\n"
-"jawab TIDAK deh"
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurasi tamat. Simpan perubahan ini ke disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Tidak bisa buka %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "error membuka file %s untuk ditulisi: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Server, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Komputer Jaringan (klien)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, SSH server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Aplikasi Perkantoran"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Workstation Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Tool untuk Palm Pilot ataupun Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Workstation"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Server, Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Nama Domain dan Server Info Network (NIS)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Program office: pengolah kata (kword, abiword), spreadsheet (kspread, "
-"gnumeric), viewer pdf,dsb"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Tool untuk audio: player mp3 atau midi, mixer, dsb"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Buku dan Howto untuk Linux dan Free Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Workstation KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, dsb"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Kumpulan tool untuk mail, news, web, transfer file, dan chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Server, Database"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Server database PostgreSQL atau MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Tools untuk memudahkan konfigurasi komputer."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Sound"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Peralatan"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentasi"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Tool untuk konsol"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Server mail Postfix, server news Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Komputer Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Komputer Multimedia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "konfigurasi LAN"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Desktop Grafis tambahan (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"The K Desktop Environment, environment grafis dasar dengan kumpulan tool-"
-"tool yang menyertainya"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Mode Grafis"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Development"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache dan Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Tool untuk membuat dan memburn CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Komputer kantoran"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, dsb"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Program Grafis, misalnya The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Librari, program, dan file include untuk pemrograman C dan C++"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Komputer Server Jaringan"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Server, Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Game"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Editor dan Player Video"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafik"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Program permainan: arcade, board, strategi, dsb"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Kumpulan tool untuk membaca dan mengirimkan email dan news (pine, mutt, "
-"tin..) dan untuk membrowse Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archive, emulator, monitoring"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Keuangan Pribadi"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Environment grafis dengan kumpulan aplikasi dan tool desktop yang mudah "
-"digunakan"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klien untuk berbagai protokol, termasuk ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Gerbang Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Program untuk memainkan/mengedit suara dan video"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Desktop Grafis lainnya"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editor, shell, tool untuk file, terminal"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Program untuk mengelola keuangan, misalnya gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Game"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Pengelolaan Informasi Pribadi"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD Burning"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Aplikasi Ilmu pengetahuan"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "aduh, saya ngga bisa baca file /etc/sysconfig/autologin: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Anda ingin restart konfigurasi ini?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Setuju?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Saya akan merestart device jaringan ini:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Sekarang saya mau restart device jaringan %s. Setuju ?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Biasanya orang pilih \"/dev/hda\", kecuali kalau Anda pilih yang lain "
-#~ "(yaitu drive master IDE) atau \"/dev/sda\" (disk SCSI utama)."
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Ini adalah antrian print\n"
-#~ "Anda boleh tambahkan atau mengubah yang sudah ada."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Waktu koneksi: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Pilih user default:"
-
-#~ msgid "Spooler: "
-#~ msgstr "Spooler: "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Silakan tes mouse Anda"
-
-#~ msgid "Press next to continue."
-#~ msgstr "Tekan Lanjutkan utk melanjutkan"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Pilihlan bahasa yang ingin Anda gunakan untuk instalasi dan sistem."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Anda harus menerima ketentuan dalam lisensi di atas untuk melanjutkan "
-#~ "proses instalasi.\n"
-#~ "\n"
-#~ "\n"
-#~ "Silakan tekan \"Baiklah\" bila Anda setuju dengan persyaratan di atas.\n"
-#~ "\n"
-#~ "\n"
-#~ "dan silakan tekan \"Tidak Mau\" bila Anda tidak setuju. Proses instalasi "
-#~ "akan dihentikan tanpa mengubah konfigurasi yang sudah ada."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Pilih layout keyboard yg dipakai dari daftar di atas"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Bila Anda menginginkan bahasa-bahasa lain selain bahasa yang Anda tadi "
-#~ "pilih pada saat setelah instalasi, silakan pilih pada daftar di atas. "
-#~ "Bila Anda mau semuanya, pilih saja \"Semuanya\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Pilih:\n"
-#~ "\n"
-#~ "  - Customized:  Bila Anda familiar dengan Linux, Anda akan dapat\n"
-#~ " memilih penggunaan sistem ini, yaitu normal, development, atau server.\n"
-#~ " Pilih \"Normal\" untuk instalasi secara umum yang biasanya. Atau pilih\n"
-#~ " \"Development\" untuk membuat software dengan Linux Anda, atau pilih\n"
-#~ " \"Server\" bila hendak menginstall server serbaguna (mail, print, dsb)\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pakar    :  Bila Anda sangat dekat dengan GNU/Linux dan ingin\n"
-#~ " menginstall Linux sesuka hati, ini adalah kelas instalasi yang pas\n"
-#~ " untuk Anda, dan Anda bisa memilih penggunaan sistem ini sebagaimana\n"
-#~ " pada kelas \"Customized\". JANGAN COBA-COBA PAKAI MODUS INI KALAO\n"
-#~ " belom cukup makan asam garam di dunia PERLINUXAN"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Berikut adalah pilihan penggunaan mesin Anda :\n"
-#~ "\n"
-#~ "*Workstation: pilih ini kalau Anda hendak menggunakan mesin Anda untuk "
-#~ "mengerjakan\n"
-#~ " pekerjaan sehari-hari di kantor atau di rumah\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: pilih ini bila Anda hendak menggunakan mesin ini untuk "
-#~ "pembuatan software.\n"
-#~ " Anda akan saya kasih kumpulan software yang berguna untuk melakukan "
-#~ "kompilasi,\n"
-#~ " debug, dan format source code, atau untuk membuat paket software\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server : Pilih ini bila Anda hendak menggunakan mesin ini sebagai\n"
-#~ " server. Entah itu file server (NFS ataw SMB), print server\n"
-#~ " (pakai protokol Unix lp (Line Printer) atau model windows SMB)\n"
-#~ " authentication server (NIS), database server dsb dsb.\n"
-#~ " Karena itu jangan mengharapken saya menyediakan rupa-rupa\n"
-#~ " software yang ngejreng (KDE,GNOME...) di sini."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Sekarang Anda pilih dulu grup paket yang mau Anda install\n"
-#~ "atau yang mau diupgrade.\n"
-#~ "\n"
-#~ "DrakX sekarang akan cek apakah Anda masih punya sisa space kosong untuk\n"
-#~ "menginstall ini semua, kalau tidak nanti Anda akan diberitahu kok.\n"
-#~ "Tapi kalau Anda mau cuek aja mau install walaupun spacenya tidak cukup\n"
-#~ "gua akan menginstall semua paketnya, tapi ada beberapa paket yang aku "
-#~ "rasa\n"
-#~ "kurang penting akan tidak diinstall. Pada daftar di bawah ini Anda bisa\n"
-#~ "pilih \"Pilih paket sendiri\"; kalau-kalau Anda pingin melihat \n"
-#~ "paket-paket yang ada (ada 1000an lebih lho...)"
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Anda dapat memilih tiap-tiap paket yang hendak Anda install\n"
-#~ "\n"
-#~ "\n"
-#~ "Anda dapat membuka atau menutup tree dengan mengklik pada pilihan di "
-#~ "sudut kiri pada\n"
-#~ "windows paket\n"
-#~ "\n"
-#~ "\n"
-#~ "Bila Anda hendak melihat daftar paket yang diurut secara alfabet, pilih "
-#~ "ikon \"Togel flat dan urut grup\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Bila Anda tidak hendak diberitahu tentang dependensi paket, pilih "
-#~ "\"Dependensi otomatis\"\n"
-#~ "Dengan cara ini bila Anda membuang suatu paket, maka paket-paket terkait "
-#~ "lainnya akan dibuang\n"
-#~ "juga secara otomatis tanpa pemberitahuan."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Kalau Anda punya semua CD pada daftar di atas, tekan OK.\n"
-#~ "Kalau tidak punya sama sekali, click Baal.\n"
-#~ "Kalau cuma punya beberapa aja, pilih aja, trus klik Ok."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "Anda kini dapat mencoba mouse. Gunakan tombol dan roda utk mencek\n"
-#~ "setting. Jika hasilnya buruk, klik \"Batal\" utk memilih driver lain.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jika Anda sedang menginstal mesin Apple dg mouse 1-tombol, ada "
-#~ "kesempatan\n"
-#~ "mendefinisikan keyboard utk mengemulasi tombol ke-2 dan ke-3.\n"
-#~ "Ini menjadikan Anda dapat mengakses fungsi penuh mouse dalam\n"
-#~ "konsol Linux dan GUI Window X.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jika Anda punya mouse ADB, pilihlah USB, karena kernel Linux akan "
-#~ "melakukan\n"
-#~ "mapping hardware mouse Anda."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Bila Anda hendak menghubungkan komputer ini ke Internet atau ke jaringan\n"
-#~ "lokal, silakan pilih konfigurasi yang benar. Nyalakan perangkat terkait "
-#~ "sebelum\n"
-#~ "memilih konfigurasi agar dapat dideteksi oleh DrakX secara otomatis.\n"
-#~ "\n"
-#~ "\n"
-#~ "BIla anda tidak memiliki koneksi ke Internet atau jaringan lokal, pilih "
-#~ "saja\n"
-#~ "\"Matikan Jaringan\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Bila Anda hendak mengkonfigurasikan jaringan nanti setelah proses "
-#~ "instalasi selesai,atau bila Anda sudah selesai mengkonfigurasikan koneksi "
-#~ "jaringan, pilih \"Selesai\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Saya tidak dapat menemukan modem di komputer ini. Silakan pilih port "
-#~ "serial mana\n"
-#~ "modem Anda dicolokkan.\n"
-#~ "\n"
-#~ "\n"
-#~ "sebagai misal, port serial pertama (pada Microsoft windows dikenal dengan "
-#~ "\"COM1\")\n"
-#~ "adalah \"ttyS0\" di GNU/Linux."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Sekarang Anda bisa memasukan pilihan dialup. Bila Anda tidak tahu\n"
-#~ "atau ragu-ragu, informasi yang benar bisa Anda tanyakan kepada\n"
-#~ "Internet Service Provider tempat Anda berlangganan. Bila Anda tidak\n"
-#~ "memasukan DNS (name server) di sini, informasi tersebut akan\n"
-#~ "saya cari sendiri pada Internet Service Provider Anda saat melakukan "
-#~ "koneksi nanti."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Bila modem yang Anda punya adalah modem eksternal, maka tolong dong "
-#~ "dinyalakan supaya DrakXbisa mendeteksinya secara otomatis."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Silakan nyalakan modemnya dan pilih mana modem yang Anda punya"
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Bila Anda tidak yakin dengan informasi di atas apakah benar atau tidak\n"
-#~ "atau bahkan bila Anda sangat tidak tahu atau ragu mau isi apa, tenang "
-#~ "saja\n"
-#~ "informasi di atas bisa Anda tanyakan kepada Internet Service Provider "
-#~ "Anda.\n"
-#~ "Bila Anda tidak mengisi DNS (name server) di sini, nanti akan saya cari "
-#~ "sendiri\n"
-#~ "dari Internet Service Provider saat melakukan koneksi ke Internet."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Anda bisa masukkan nama host Anda sekarang. Bila Anda tidak yakin apa "
-#~ "yang harus dimasukkan,\n"
-#~ "informasi ini bisa diperoleh dari ISP."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Silakan konfigurasikan device jaringan Anda:\n"
-#~ "\n"
-#~ "  * Alamat IP: Kalau Anda tak tahu, tanyakan sana pada network "
-#~ "administratornya.\n"
-#~ "     Jangan masukkan alamat IP kalau Anda pilih \"IP Otomatis\" di "
-#~ "bawah.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Netmask: Pilih aja \"255.255.255.0\", kecuali kalau ragu tanya juga "
-#~ "ke\n"
-#~ " network administratornya.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - IP otomatis: Bila network Anda menggunakan bootp atau protokol dhcp, "
-#~ "pilih\n"
-#~ " ini. Bila Anda pilih ini, tak usah masukkan alamat IP di \"Alamat IP\". "
-#~ "Bila\n"
-#~ " Anda ragu juga, tanya lagi ke network administrator."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Anda sekarang bisa memasukan nama host. Bila Anda tidak tahu atau ragu\n"
-#~ "silakan kontak network administrator Anda saja."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Sekarang Anda boleh memasukan nama host. Bila tidak tahu\n"
-#~ "atau tidak pasti, kosongkan saja deh."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Anda bisa masukkan dialup sekarang. Bila Anda tak yakin apa yang harus "
-#~ "dimasukkan,\n"
-#~ "informasi ini bisa diperoleh dari ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Bila Anda mau pakai proxy, sekarang saatnya untuk mengkonfigurasi. Bila "
-#~ "Anda\n"
-#~ "tak tahu pakai proxy apa tak, tanya gih ke network administratornya atau "
-#~ "ISP."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Anda bisa install paket kriptografi bila koneksi Internet Anda telah\n"
-#~ "dikonfig dengan benar. Sekarang pilih mirror tempat Anda ingin download\n"
-#~ "paket kriptografinya dan kemudian pilih paketnya.\n"
-#~ "\n"
-#~ "Perhatikan bahwa Anda harus pilih mirror dan kriptografi sesuai "
-#~ "ketentuan\n"
-#~ "yang berlaku di daerah Anda."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Sekarang pilih zonawaktu tempat Anda tinggal"
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Sekarang Anda bisa mengkonfigurasikan printer lokal (terhubung ke "
-#~ "komputer Anda) atau\n"
-#~ "printer remote (yang diakses via jaringan Unix, Netware, atau Microsoft "
-#~ "windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Bila Anda ingin dapat mencetak, silakan pilih sistem cetak CUPS atau LPR\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS adalah sistem cetak baru dan powerfull di Unix (CUPS = \"Common "
-#~ "Unix\n"
-#~ "Printing System\"). Ini adalah sistem cetak standar Linux Mandrake.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR adalah sistem cetak kuno, masih dipakai pada versi lama Linux "
-#~ "Mandrake.\n"
-#~ "\n"
-#~ "\n"
-#~ "Bila Anda tak punya printer, pilih \"Tidak Ada\""
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux dapat menggunakan berbagai jenis printer. Tiap-tiap tipe "
-#~ "memerlukan setup\n"
-#~ "yang berbeda\n"
-#~ "\n"
-#~ "\n"
-#~ "Bila printer tersambung secara fisik dalam komputer ini, pilih\n"
-#~ "\"Printer Lokal\". \n"
-#~ "\n"
-#~ "Bila Anda menggunakan printer Unix jarak jauh, pilih\n"
-#~ "\"Printer remote\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Bila Anda hendak menggunakan printer pada mesin Microsoft windows (atau\n"
-#~ "pada mesin Unix dengan SMB), maka pilih \"SMB/WIndows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Silakan nyalakan printer sebelum DrakX mendeteksinya.\n"
-#~ "\n"
-#~ "Anda perlu mengisi beberapa informasi di sini.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nama printer: spooler cetak menggunakan nama \"lp\" sebagai nama "
-#~ "printer default\n"
-#~ "Jadi Anda pelru punya sebuah printer dengan nama \"lp\". Bila Anda "
-#~ "memiliki cuma \n"
-#~ "satu buah printer saja, Anda bisa menggunakan beberapa nama. Tuliskan "
-#~ "saja nama\n"
-#~ "itu dan pisahkan dengan karakter pipe \"|\". Jadi untuk memberi nama "
-#~ "printer dengan\n"
-#~ "nama yang mudah dimengerti, Anda bisa tuliskan: \"Printer saya|lp\".\n"
-#~ "   Printer yang memiliki \"lp\" pada namanya akan menjadi printer "
-#~ "default.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Deskripsi: ini boleh diisi boleh tidak, tapi bila diisi akan lebih "
-#~ "memudahkan Anda\n"
-#~ "untuk membedakan antara printer bila Anda memiliki printer lebih dari "
-#~ "satu buah atau bila\n"
-#~ "printer ini akan diakses oleh banyak orang.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Lokasi: Anda bisa menuliskan informasi lebih detil tentang lokasi "
-#~ "printer ini.\n"
-#~ "(misalnya \"Printer yang ada di lantai 2\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Anda perlu memasukkan beberapa informasi di sini.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nama antrian: spooler cetak menggunakan nama \"lp\" sebagai nama "
-#~ "printer default\n"
-#~ "Jadi Anda pelru punya sebuah printer dengan nama \"lp\". Bila Anda "
-#~ "memiliki cuma \n"
-#~ "satu buah printer saja, Anda bisa menggunakan beberapa nama. Tuliskan "
-#~ "saja nama\n"
-#~ "itu dan pisahkan dengan karakter pipe \"|\". Jadi untuk memberi nama "
-#~ "printer dengan\n"
-#~ "nama yang mudah dimengerti, Anda bisa tuliskan: \"Printer saya|lp\".\n"
-#~ "   Printer yang memiliki \"lp\" pada namanya akan menjadi printer "
-#~ "default.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Direktori Spool: Dalam direktori ini semua job printer akan "
-#~ "disimpan. BIla Anda tidak\n"
-#~ "mengerti biarkan saja terisi dalam nilai defaultnya.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Koneksi Printer: Bila printer tersambung secara fisik dalam komputer "
-#~ "ini, pilih\n"
-#~ "\"Printer Lokal\". Namun bila Anda menggunakan printer Unix jarak jauh, "
-#~ "pilih\n"
-#~ "\"Printer lpd remote\".\n"
-#~ "\n"
-#~ "\n"
-#~ "   Bila Anda hendak menggunakan printer pada mesin Microsoft windows "
-#~ "(atau\n"
-#~ "pada mesin Unix dengan SMB), maka pilih \"SMB/WIndows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "   Bila Anda hendak mengakses printer pada jaringan Netware, pilih "
-#~ "\"Netware\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Printer Anda tidak dapat dideteksi. Silakan tuliskan nama device atau di "
-#~ "mana printer Anda\n"
-#~ "tersambung.\n"
-#~ "\n"
-#~ "\n"
-#~ "Sebagai contoh, printer yang disambung ke port parallel pertma komputer "
-#~ "disebut\n"
-#~ "\"/dev/lp0\" pada GNU/Linux, dan disebut \"LPT1\" pada Microsoft windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Anda harus pilih printer yang Anda punya pada daftar di atas."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Silakan pilih konfigurasi yang tepat bergantung tipe printer yang Anda "
-#~ "punya.\n"
-#~ "Silakan baca dokumentasinya bila Anda tidak tahu harus pilih apa di "
-#~ "sini.\n"
-#~ "\n"
-#~ "\n"
-#~ "Anda akan dapat melakukan test pada konfigurasi ini nanti dan bisa juga\n"
-#~ "mengubah konfigurasi ini bila tidak berjalan sebagaimana mestinya."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Sekarang Anda mesti berikan password root untuk\n"
-#~ "sistem Linux-Mandrake ini. Password harus diketikkan dua kali untuk\n"
-#~ "verifikasi bahwa Anda tidak salah ketik.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root adalah sistem administrator. Hanya orang yang punya akses ke\n"
-#~ "account administrator saja yang dapat mengatur dan mengelola sistem.\n"
-#~ "Awas, account administrator yang disalahgunakan atau dipakai\n"
-#~ "tanpa izin akan sangat membahayakan integritas sistem, data,\n"
-#~ "dan sistem lain yang terhubung. \n"
-#~ "\n"
-#~ "\n"
-#~ "Password haruslah campuran dari\n"
-#~ "karakter alfanumerik dan panjangnya minimal 8 karakter. Jangan\n"
-#~ "pernah menuliskan password Anda di kertas atau di mana saja. \n"
-#~ "\n"
-#~ "Jangan buat password Anda terlalu panjang atau rumit, nanti bisa lupa."
-
-#~ msgid ""
-#~ "If your network uses LDAP (or NIS) protocol for authentication, select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "Jika jaringan Anda memakai protokol otentikasi LDAP/NIS, pilih\n"
-#~ "\"LDAP\" (atau \"NIS\") . Jika Anda tak tahu, tanyalah admin jaringan "
-#~ "Anda.\n"
-#~ "\n"
-#~ "Jika komputer tak terhubung jaringan, Anda dapat memilih\n"
-#~ "\"File lokal\" utk otentikasi."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Silakan Anda buat satu atau lebih user \"biasa\", setelah Anda\n"
-#~ "membuat user \"pihak berwenang\", yaitu root. Anda bisa buat\n"
-#~ "user untuk tiap orang yang Anda perbolehkan untuk mengakses komputer\n"
-#~ "ini. Perhatikan bahwa tiap account user akan memiliki preferesi\n"
-#~ "sendiri-sendiri (environment grafis, seting program dsb)\n"
-#~ "dan juga punya \"direktori home\" sendiri, tempat preferensi tadi\n"
-#~ "disimpan\n"
-#~ "\n"
-#~ "\n"
-#~ "Pertama-tama, buatlah account untuk Anda sendiri! Buatlah walau Anda\n"
-#~ "adalah satu-satunya orang yang mengakses mesin ini. Anda nanti tidak\n"
-#~ "BOLEH mengakses mesin ini untuk keperluan sehari-hari, karena merupakan\n"
-#~ "resiko besar bila Anda sering login sebagai root. Biasanya ini "
-#~ "disebabkan\n"
-#~ "karena salah ketik, dsb.\n"
-#~ "\n"
-#~ "\n"
-#~ "Karena itu, biasakan untuk konek ke msein ini dengan menggunakan account\n"
-#~ "yang telah Anda buat disini, dan login sebagai root, hanya untuk \n"
-#~ "keperluan administratif dan maintenance saja yah."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Sangat disarankan Anda membuat bootdisk. Bila Anda gagal\n"
-#~ "memboot komputer, bootdisk adalah satu-satunya cara untuk\n"
-#~ "menyelamatkan sistem tanpa instal ulang."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Pilihan LILO dan grub adalah:\n"
-#~ "  - Boot device: Set nama devicenya (misalnya hard disk partisi) yang "
-#~ "berisi boot sector\n"
-#~ "                 pilih \"/dev/hda\", kecuali kalau Anda tahu yang "
-#~ "pastinya.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay sebelum boot ke image default: Menentukan waktu dalam "
-#~ "sepersepuluh detik\n"
-#~ " sebelum boot loader akan meload image yang default (pertama). Ini "
-#~ "berguna\n"
-#~ " pada sistem yang boot dari hard disk dan keyboardnya dinyalakan. Boot "
-#~ "loader\n"
-#~ " tidak menunggu bila \"delay\" dihilangkan atau diset ke nol.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Video mode: Menentukan mode text VGA yang dipilih saat booting. \n"
-#~ " Setting yang bisa dipakai: \n"
-#~ "  * normal: pilih mode text 80x25\n"
-#~ "  * <angka>: gunakan mode text.\n"
-#~ "\n"
-#~ "\n"
-#~ "   - Hapus \"/tmp\" saat boot bila Anda ingin menghapus semua file-file "
-#~ "di dalam direktori\n"
-#~ "\"/tmp\" saat boot sistem dimulai.\n"
-#~ "\n"
-#~ "\n"
-#~ "   - Ukuran RAM yang tepat. Duh, ngga ada metode standar untuk "
-#~ "mendapatkan \n"
-#~ "angka jumlah RAM yang tepat di komputer tertentu. Jadi, Linux mungkin "
-#~ "akan\n"
-#~ "salah mendeteksi jumlah RAM yang Anda punya sekarang. Bila benar, saya "
-#~ "salah\n"
-#~ "tebak angka RAMnya di sini, silakan masukkan angka yang benar. Oh ya,\n"
-#~ "beda 2 atau 4 MB sih ngga masalah loh."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO adalah bootloader untuk SPARC: Dianya akan memboot\n"
-#~ "GNU/Linux atau sistem operasi lain yang ada di komputer ini.\n"
-#~ "Biasanya, sistem operasi yang sudah ada akan secara normal di deteksi "
-#~ "dan\n"
-#~ "diinstallkan. Bila ternyata nanti tak bisa, Anda bisa tambahkan sendiri\n"
-#~ "secara manual di sini. Hati-hati yah nanti waktu kasih parameternya.\n"
-#~ "\n"
-#~ "\n"
-#~ "Anda juga bisa menutup akses ke sistem operasi tertentu. Caranya gampang "
-#~ "aja\n"
-#~ "Anda bisa hapus entrinya disini. Tapi untuk bisa masuk ke sistem operasi "
-#~ "itu\n"
-#~ "Anda perlu bootdisk nantinya."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Pilihan SILO dan grub adalah:\n"
-#~ "  - Instalasi Bootloader: Tempat Anda hendak meletakkan informasi boot\n"
-#~ " ke GNU/Linux. Pilih aja \"Sektor pertama di drive (MBR)\", kecuali\n"
-#~ " elu udah tau tempatnya\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay sebelum boot ke image default: Menentukan waktu dalam "
-#~ "sepersepuluh detik\n"
-#~ " sebelum boot loader akan meload image yang default (pertama). Ini "
-#~ "berguna\n"
-#~ " pada sistem yang boot dari hard disk dan keyboardnya dinyalakan. Boot "
-#~ "loader\n"
-#~ " tidak menunggu bila \"delay\" dihilangkan atau diset ke nol."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Sekarang Anda akan mengkonfigurasikan X Window System, yang merupakan\n"
-#~ "inti GUI (Graphical User Interface) bagi GNU/Linux. Sekarang,\n"
-#~ "Anda harus konfigurasikan video card dan monitor. Biasanya\n"
-#~ "tahapan ini akan otomatis, tapi Anda perlu verifikasi\n"
-#~ "hasil deteksi dan memeriksanya, benar apa tidak:)\n"
-#~ "\n"
-#~ "\n"
-#~ "Setelah itu, X akan dijalankan (kecuali kalau Anda bilang jangan)\n"
-#~ "dan periksa apakah settingnya sudah cocok atau belum.\n"
-#~ "Kalau tidak cocok, Anda bisa kembali lagi dan mengubah konfigurasi\n"
-#~ "lalu coba lagi."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Bila ada yang ngaco pada konfigurasi Xnya, silaken pakai pilihan ini "
-#~ "untuk\n"
-#~ "membuat X Window System lebih bagus."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Bila Anda ingin menggunakan login grafik, pilih \"Ya\". Sebaliknya,\n"
-#~ "pilih \"Tidak\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Silakan pilih tingkat keamanan sistem ini. Baca dulu manualnya untuk info "
-#~ "lebihlengkap\n"
-#~ "Kalau Anda tak tahu, pilih saja default.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Sistem Anda akan diboot ulang.\n"
-#~ "\n"
-#~ "Setelah itu, Linux Mandrake akan di-load otomatis.\n"
-#~ "Bila Anda ingin boot ke sistem operasi lain, silakan baca instruksi\n"
-#~ "tambahan."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Ceko (Programmer)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovakia (Programmer)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Beri nama profil yang hendak dibuat:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Tulis /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "Baca dari file"
-
-#~ msgid "Save in file"
-#~ msgstr "Simpan di file"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Pulihkan dari floppy"
-
-#~ msgid "Format all"
-#~ msgstr "Format semua"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Setelah melakukan format semua partisi,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "seluruh data dalam partisi-partisi ini akan hilang"
-
-#~ msgid "Reload"
-#~ msgstr "Reload"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Mau buat disket auto install untuk replikasi linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "konfigurasi ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Dengan server CUPS remote, Anda tidak perlu mengkonfigurasikan\n"
-#~ "printer di sini; printer nantinya akan secara otomatis dideteksi\n"
-#~ "kecuali servernya ada di jaringan lain; dalam hal ini, Anda perlu\n"
-#~ "memasukan alamat IP server CUPS itu dan nomor portnya kalau ada."
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "Isi Nama Printer dan Komentar"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Nama antrian remote hilang!"
-
-#~ msgid "Pipe into command"
-#~ msgstr "Pipe ke perintah"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "Di sini Anda dapat menentukan perintah sebarang di mana job harus "
-#~ "disodorkan, bukannya dikirim langsung ke printer."
-
-#~ msgid "Command line"
-#~ msgstr "Perintah"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "Harus diisi perintah"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Monitoring Jaringan"
-
-#~ msgid "Settings"
-#~ msgstr "Setting"
-
-#~ msgid "Profile "
-#~ msgstr "Profil "
-
-#~ msgid "Statistics"
-#~ msgstr "Statistik"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Kecepatan Kirim"
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Kecepatan Terima: "
-
-#~ msgid "Connection Time: "
-#~ msgstr "Waktu koneksi: "
-
-#~ msgid "Logs"
-#~ msgstr "Log"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Sambung koneksi Internet"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Putuskan koneksi Internet"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "koneksi Internet gagal diputus"
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "koneksi Internet selesai diputus"
-
-#~ msgid "Connection complete."
-#~ msgstr "Koneksi selesai"
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Koneksi gagal\n"
-#~ "Silakan periksa konfigurasinya di Mandrake Control Center"
-
-#~ msgid "Color configuration"
-#~ msgstr "Konfigurasi warna"
-
-#~ msgid "sent: "
-#~ msgstr "terkirim: "
-
-#~ msgid "received: "
-#~ msgstr "diterima: "
-
-#~ msgid "average"
-#~ msgstr "rata-rata"
-
-#~ msgid "Connect"
-#~ msgstr "Tersambung"
-
-#~ msgid "Disconnect"
-#~ msgstr "Putus"
-
-#~ msgid "/File/_New"
-#~ msgstr "/File/_Baru"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>N"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/File/_Buka"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>O"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/File/_Simpan"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/File/Simpan _Dengan nama lain"
-
-#~ msgid "/File/-"
-#~ msgstr "/File/-"
-
-#~ msgid "/_Options"
-#~ msgstr "/_Pilihan"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/Pilihan/Test"
-
-#~ msgid "/_Help"
-#~ msgstr "/_Help"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/Help/_About..."
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Runlevel standar"
-
-#~ msgid "Europe"
-#~ msgstr "Eropa"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "Hapus Antrian"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Isi file konfigurasi tidak dapat dibaca"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Config file tidak dikenal"
-
-#~ msgid "Adapter"
-#~ msgstr "Adapter"
-
-#~ msgid "Disable network"
-#~ msgstr "Matikan jaringan"
-
-#~ msgid "Enable network"
-#~ msgstr "Aktifkan jaringan"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Sekarang Anda bisa test mousenya. Tekan tombol mousenya dan gerakan "
-#~ "mousenya juga\n"
-#~ "untuk mencoba apakah sudah bisa atau belum. Bila belum, silakan pilih "
-#~ "\"Batal\" untuk kembali\n"
-#~ "memilih driver yang lain."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Konfigurasi koneksi DSL (atau ADSL)"
-
-#~ msgid "Choose"
-#~ msgstr "Pilih"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Anda bisa memasukan URI untuk mengakses printer dengan CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Ya, Test cetak ascii"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Ya, Test cetak postscript"
-
-#~ msgid "Paper Size"
-#~ msgstr "Ukuran Kertas"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Kertas di eject habis ngeprint?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Parameter driver Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Pilihan kedalaman warna"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Cetak text dalam PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Betulkan efek tangga pada teks ?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Jumlah halaman per output"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Margin Kiri/Kanan dalam point (1/72 inci)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Margin Atas/Bawah dalam point (1/72 inci)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Extra option pada GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Pilihan text extra"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Balikkan urutan halaman"
-
-#~ msgid "CUPS starting"
-#~ msgstr "CUPS dijalankan"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Pilih koneksi Printer remote"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Tiap antrian cetak harus punya nama (biasanya lp).\n"
-#~ "Parameter lain seperti keterangan dan lokasi printer bisa ditambahkan.\n"
-#~ "Sekarang saya mau tanya,\n"
-#~ "nama printer yang digunakan ini apa yah ?\n"
-#~ "Juga saya mau tanya bagaimana printernya disambungkan ke situ?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Tiap antrian cetak harus punya nama (biasanya lp) dan direktori spool\n"
-#~ "yang dialokasikan untuknya. Sekarang saya mau tanya,\n"
-#~ "nama antrian dan direktori yang digunakan apa yah ?\n"
-#~ "Juga saya mau tanya bagaimana printernya disambungkan ke situ?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nama Antrian"
-
-#~ msgid "Spool directory"
-#~ msgstr "Direktori spool"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Agar sistem Anda lebih secure, silakan pilih \"Gunakan file shadow\" "
-#~ "dan \n"
-#~ "\"Password Pakai MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Bila network Anda menggunakan NIS, pilih \"Gunakan NIS\". Kalau tak tahu, "
-#~ "tanya\n"
-#~ "network admin Anda dong."
-
-#~ msgid "yellow pages"
-#~ msgstr "yellow pages"
-
-#~ msgid "Light configuration"
-#~ msgstr "Konfigurasi ringan"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS Provider 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS Provider 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Pilih cara yang Anda inginkan untuk terhubung ke Internet"
-
-#~ msgid "cannot fork: "
-#~ msgstr "tidak bisa fork: "
-
-#~ msgid "Configure..."
-#~ msgstr "Konfigurasikan ..."
-
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "Konfigurasi LILO/GRUB"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Ukuran yang dipilih %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Buka koneksi ini..."
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Skrip ini akan meload modul untuk mouse usb"
diff --git a/perl-install/share/po/is.po b/perl-install/share/po/is.po
deleted file mode 100644
index 596de7017..000000000
--- a/perl-install/share/po/is.po
+++ /dev/null
@@ -1,8476 +0,0 @@
-# Translation file for Mandrake graphic install, DrakX
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (C) 1999 Mandrakesoft
-# Jóhann Þorvarðarson <johann.torvardarson@lais.is>, 1999-2000
-# Þórarinn (Tony) R. Einarsson <thori@mindspring.com>, 1999-2000
-#
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-06-02 17:16+0200\n"
-"PO-Revision-Date: 2000-01-05 18:53-0500\n"
-"Last-Translator: Thorarinn Einarsson <thori@mindspring.com>\n"
-"Language-Team: Icelandic\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Configure all heads independantly"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:233
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:236
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:239
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "Les uppsetningarskrá"
-
-#: ../../Xconfigurator.pm_.c:240
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Graphic card"
-msgstr "Skjákort"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Select a graphic card"
-msgstr "Veldu skjákort"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "Choose a X server"
-msgstr "Veldu X þjón"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "X server"
-msgstr "X þjónn"
-
-#: ../../Xconfigurator.pm_.c:309 ../../Xconfigurator.pm_.c:316
-#: ../../Xconfigurator.pm_.c:366
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:312
-#, fuzzy
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Hverju viltu bæta við?"
-
-#: ../../Xconfigurator.pm_.c:324
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:326 ../../Xconfigurator.pm_.c:359
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:328 ../../Xconfigurator.pm_.c:361
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:336 ../../Xconfigurator.pm_.c:350
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:338 ../../Xconfigurator.pm_.c:352
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:371
-#, fuzzy
-msgid "XFree configuration"
-msgstr "Lokauppsetning"
-
-#: ../../Xconfigurator.pm_.c:416
-msgid "Select the memory size of your graphic card"
-msgstr "Veldu minnisstærð skjákortsins"
-
-#: ../../Xconfigurator.pm_.c:463
-msgid "Choose options for server"
-msgstr "Veldu valmöguleika fyrir þjón"
-
-#: ../../Xconfigurator.pm_.c:480
-msgid "Choose a monitor"
-msgstr "Veldu skjá"
-
-#: ../../Xconfigurator.pm_.c:480
-msgid "Monitor"
-msgstr "Skjár"
-
-#: ../../Xconfigurator.pm_.c:483
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Hér þarf að gefa upp 'horizontal sync' tíðni skjásins þíns. Þú getur\n"
-"valið tíðnisvið að neðan sem passar við staðlaða skjái eða gefið upp\n"
-"eitthvað annað.\n"
-"\n"
-"það er MJÖG MIKILVÆGT að velja ekki of hátt tíðnisvið fyrir skjáinn. Hafir\n"
-"þú einhverjar efasemdir, veldu þá lægri stillingar."
-
-#: ../../Xconfigurator.pm_.c:490
-msgid "Horizontal refresh rate"
-msgstr "Lárétt tíðni"
-
-#: ../../Xconfigurator.pm_.c:491
-msgid "Vertical refresh rate"
-msgstr "Lóðrétt tíðni"
-
-#: ../../Xconfigurator.pm_.c:528
-msgid "Monitor not configured"
-msgstr "Skjár ekki skilgreindur"
-
-#: ../../Xconfigurator.pm_.c:531
-msgid "Graphic card not configured yet"
-msgstr "Skjákort ekki skilgreint enn"
-
-#: ../../Xconfigurator.pm_.c:534
-msgid "Resolutions not chosen yet"
-msgstr "Upplausn ekki valin enn"
-
-#: ../../Xconfigurator.pm_.c:551
-msgid "Do you want to test the configuration?"
-msgstr "Viltu prófa skilgreininguna"
-
-#: ../../Xconfigurator.pm_.c:555
-#, fuzzy
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Aðvörun: Prófanir eru varasamar með þetta skjákort"
-
-#: ../../Xconfigurator.pm_.c:558
-msgid "Test of the configuration"
-msgstr "Prófunar skilgreining"
-
-#: ../../Xconfigurator.pm_.c:597
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"prófaðu að breyta stillingum"
-
-#: ../../Xconfigurator.pm_.c:597
-msgid "An error has occurred:"
-msgstr "Villa átti sér stað"
-
-#: ../../Xconfigurator.pm_.c:619
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Hætti eftir %d sekúndur"
-
-#: ../../Xconfigurator.pm_.c:630
-#, fuzzy
-msgid "Is this the correct setting?"
-msgstr "Er þetta rétt?"
-
-#: ../../Xconfigurator.pm_.c:638
-msgid "An error has occurred, try to change some parameters"
-msgstr "Villa kom upp, reyndu að breyta færibreytum"
-
-#: ../../Xconfigurator.pm_.c:684 ../../printerdrake.pm_.c:277
-#: ../../services.pm_.c:125
-msgid "Resolution"
-msgstr "Upplausn"
-
-#: ../../Xconfigurator.pm_.c:731
-msgid "Choose the resolution and the color depth"
-msgstr "Veldu upplausn og fjölda lita"
-
-#: ../../Xconfigurator.pm_.c:733
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Skjákort: %s"
-
-#: ../../Xconfigurator.pm_.c:734
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 þjónn: %s"
-
-#: ../../Xconfigurator.pm_.c:750 ../../standalone/draknet_.c:280
-#: ../../standalone/draknet_.c:283
-#, fuzzy
-msgid "Expert Mode"
-msgstr "F. snillinga"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "Show all"
-msgstr "Sýna alla"
-
-#: ../../Xconfigurator.pm_.c:794
-msgid "Resolutions"
-msgstr "Upplausnir"
-
-#: ../../Xconfigurator.pm_.c:1330
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tegund lyklaborðs: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1331
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tegund músar: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1332
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Mús: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1333
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Skjár: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1334
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Lárétt tíðni skjás: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1335
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Lóðrétt tíðni skjás: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1336
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Skjákort: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1337
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Skjákortsminni: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1339
-#, fuzzy, c-format
-msgid "Color depth: %s\n"
-msgstr "Stillingar á litadýpt"
-
-#: ../../Xconfigurator.pm_.c:1340
-#, fuzzy, c-format
-msgid "Resolution: %s\n"
-msgstr "Upplausnir"
-
-#: ../../Xconfigurator.pm_.c:1342
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 þjónn: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1343
-#, fuzzy, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 þjónn: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1362
-msgid "Preparing X-Window configuration"
-msgstr "Undirbý X-Window skilgreiningu"
-
-#: ../../Xconfigurator.pm_.c:1382
-msgid "What do you want to do?"
-msgstr "Hvað viltu gera?"
-
-#: ../../Xconfigurator.pm_.c:1387
-msgid "Change Monitor"
-msgstr "Skipta um skjá"
-
-#: ../../Xconfigurator.pm_.c:1388
-msgid "Change Graphic card"
-msgstr "Skipta um skjákort"
-
-#: ../../Xconfigurator.pm_.c:1390
-msgid "Change Server options"
-msgstr "Breyta þjóns möguleikum"
-
-#: ../../Xconfigurator.pm_.c:1391
-msgid "Change Resolution"
-msgstr "Breyta upplausn"
-
-#: ../../Xconfigurator.pm_.c:1392
-msgid "Show information"
-msgstr "Sýna upplýsingar"
-
-#: ../../Xconfigurator.pm_.c:1393
-msgid "Test again"
-msgstr "Prófa aftur"
-
-#: ../../Xconfigurator.pm_.c:1394 ../../bootlook.pm_.c:238
-msgid "Quit"
-msgstr "Hætta"
-
-#: ../../Xconfigurator.pm_.c:1402
-#, fuzzy, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr "Halda núverandi IP stillingum"
-
-#: ../../Xconfigurator.pm_.c:1423
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Stimplaðu þig aftur inn í %s til að virkja breytingarnar"
-
-#: ../../Xconfigurator.pm_.c:1443
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Stimplaðu þig út og sláðu á Ctrl-Alt-Backspace"
-
-#: ../../Xconfigurator.pm_.c:1446
-msgid "X at startup"
-msgstr "X í ræsingu"
-
-#: ../../Xconfigurator.pm_.c:1447
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ég get stillt tölvuna þína til að kveikja sjálfvirkt á X við ræsingu\n"
-"Vilt þú kveikja á X við endurræsingu?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 litir (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 þúsund litir (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 þúsund litir (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljón litir (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljarðar lita (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB or more"
-msgstr "16 MB eða meira"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Staðlað VGA, 640x480 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Samhæft, 1024x768 @ 87 Hz samtvinnað (ekkert 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 @ 87 Hz samtvinnað, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Ósamtvinnað SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Hátíðni SVGA, 1024x768 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Skjár sem ræður við 1280x1024 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Skjár sem ræður við 1280x1024 @ 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Skjár sem ræður við 1280x1024 @ 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Skjár sem ræður við 1600x1200 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Skjár sem ræður við 1600x1200 @ 76 Hz"
-
-#: ../../any.pm_.c:99 ../../any.pm_.c:124
-msgid "First sector of boot partition"
-msgstr "Á fyrsta geira ræsidisksneiðar"
-
-#: ../../any.pm_.c:99 ../../any.pm_.c:124 ../../any.pm_.c:197
-msgid "First sector of drive (MBR)"
-msgstr "Í ræsifærsluna (MBR)"
-
-#: ../../any.pm_.c:103
-#, fuzzy
-msgid "SILO Installation"
-msgstr "Uppsetning LILO"
-
-#: ../../any.pm_.c:104 ../../any.pm_.c:117
-msgid "Where do you want to install the bootloader?"
-msgstr "Hvert viltu setja ræsistjórann?"
-
-#: ../../any.pm_.c:116
-#, fuzzy
-msgid "LILO/grub Installation"
-msgstr "Uppsetning LILO"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:142
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:130
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:131 ../../any.pm_.c:142
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:134
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:138
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:140 ../../any.pm_.c:142
-#, fuzzy
-msgid "Yaboot"
-msgstr "Rót"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:180
-#, fuzzy
-msgid "Bootloader main options"
-msgstr "Stillingar LILO"
-
-#: ../../any.pm_.c:149 ../../any.pm_.c:181
-#, fuzzy
-msgid "Bootloader to use"
-msgstr "Stillingar LILO"
-
-#: ../../any.pm_.c:151
-#, fuzzy
-msgid "Bootloader installation"
-msgstr "Stillingar LILO"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:183
-msgid "Boot device"
-msgstr "Ræsitæki"
-
-#: ../../any.pm_.c:154
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr ""
-
-#: ../../any.pm_.c:155
-msgid "Compact"
-msgstr "Samþjappað"
-
-#: ../../any.pm_.c:155
-msgid "compact"
-msgstr "samþjappað"
-
-#: ../../any.pm_.c:156 ../../any.pm_.c:256
-msgid "Video mode"
-msgstr "Skjáhamur"
-
-#: ../../any.pm_.c:158
-msgid "Delay before booting default image"
-msgstr "Töf áður en sjálfgefin ræsing byrjar"
-
-#: ../../any.pm_.c:160 ../../any.pm_.c:741
-#: ../../install_steps_interactive.pm_.c:904 ../../netconnect.pm_.c:629
-#: ../../printerdrake.pm_.c:98 ../../printerdrake.pm_.c:132
-#: ../../standalone/draknet_.c:569
-msgid "Password"
-msgstr "Lykilorð"
-
-#: ../../any.pm_.c:161 ../../any.pm_.c:742
-#: ../../install_steps_interactive.pm_.c:905
-msgid "Password (again)"
-msgstr "Lykilorð (aftur)"
-
-#: ../../any.pm_.c:162
-msgid "Restrict command line options"
-msgstr "Takmarka alla rofa á skipanlínu"
-
-#: ../../any.pm_.c:162
-msgid "restrict"
-msgstr "takmarka"
-
-#: ../../any.pm_.c:164
-msgid "Clean /tmp at each boot"
-msgstr ""
-
-#: ../../any.pm_.c:165
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Nákvæm stærð vinnsluminnis (fann %d MB)"
-
-#: ../../any.pm_.c:167
-msgid "Enable multi profiles"
-msgstr ""
-
-#: ../../any.pm_.c:171
-msgid "Give the ram size in MB"
-msgstr "Sláðu inn vinnsluminni í MB"
-
-#: ../../any.pm_.c:173
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Valkosturinn ``Takmarka alla rofa á skipanalínu'' gerir ekkert án lykilorðs"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:718
-#: ../../install_steps_interactive.pm_.c:899
-msgid "Please try again"
-msgstr "Reyndu aftur"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:718
-#: ../../install_steps_interactive.pm_.c:899
-msgid "The passwords do not match"
-msgstr "Mismunandi lykilorð"
-
-#: ../../any.pm_.c:182
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:184
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:185
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:186
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:187
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:188
-#, fuzzy
-msgid "Default OS?"
-msgstr "Sjálfgefið"
-
-#: ../../any.pm_.c:210
-#, fuzzy
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hérna eru núverandi stillingar LILO .\n"
-"Þú getur bætt við fleirum eða breytt þessum."
-
-#: ../../any.pm_.c:220 ../../printerdrake.pm_.c:356
-msgid "Add"
-msgstr "Bæta við"
-
-#: ../../any.pm_.c:220 ../../any.pm_.c:729 ../../diskdrake.pm_.c:46
-#: ../../printerdrake.pm_.c:356
-msgid "Done"
-msgstr "Búið"
-
-#: ../../any.pm_.c:220
-#, fuzzy
-msgid "Modify"
-msgstr "Breyta RAID"
-
-#: ../../any.pm_.c:228
-msgid "Which type of entry do you want to add?"
-msgstr "Hverju viltu bæta við?"
-
-#: ../../any.pm_.c:229
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:229
-msgid "Other OS (SunOS...)"
-msgstr "Öðru stýrikerfi (SunOS...)"
-
-#: ../../any.pm_.c:230
-msgid "Other OS (MacOS...)"
-msgstr "Öðru stýrikerfi (MacOS...)"
-
-#: ../../any.pm_.c:230
-msgid "Other OS (windows...)"
-msgstr "Öðru stýrikerfi (Windows...)"
-
-#: ../../any.pm_.c:250 ../../any.pm_.c:252
-msgid "Image"
-msgstr "Ræsikjarna"
-
-#: ../../any.pm_.c:253 ../../any.pm_.c:264
-msgid "Root"
-msgstr "Rót"
-
-#: ../../any.pm_.c:254 ../../any.pm_.c:283
-msgid "Append"
-msgstr "Bæta aftan við"
-
-#: ../../any.pm_.c:258
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:259
-msgid "Read-write"
-msgstr "Les-skrif"
-
-#: ../../any.pm_.c:266
-msgid "Table"
-msgstr "Tafla"
-
-#: ../../any.pm_.c:267
-msgid "Unsafe"
-msgstr "Óöruggt"
-
-#: ../../any.pm_.c:274 ../../any.pm_.c:279 ../../any.pm_.c:282
-msgid "Label"
-msgstr "Nafn"
-
-#: ../../any.pm_.c:276 ../../any.pm_.c:287
-msgid "Default"
-msgstr "Sjálfgefið"
-
-#: ../../any.pm_.c:284
-#, fuzzy
-msgid "Initrd-size"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:286
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:294
-msgid "Remove entry"
-msgstr "Fjarlægja"
-
-#: ../../any.pm_.c:297
-msgid "Empty label not allowed"
-msgstr "Autt er ekki leyft"
-
-#: ../../any.pm_.c:298
-#, fuzzy
-msgid "This label is already used"
-msgstr "Þetta nafn er nú þegar í notkun."
-
-#: ../../any.pm_.c:317
-#, fuzzy
-msgid "What type of partitioning?"
-msgstr "Hvernig prentara ertu með?"
-
-#: ../../any.pm_.c:608
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Fann %s %s tengi"
-
-#: ../../any.pm_.c:609
-msgid "Do you have another one?"
-msgstr "Er kannski eitt enn í vélinni?"
-
-#: ../../any.pm_.c:610
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Eru einhver %s tengi í tölvunni?"
-
-#: ../../any.pm_.c:612 ../../interactive.pm_.c:104 ../../my_gtk.pm_.c:616
-#: ../../printerdrake.pm_.c:237
-msgid "No"
-msgstr "Nei"
-
-#: ../../any.pm_.c:612 ../../interactive.pm_.c:104 ../../my_gtk.pm_.c:616
-msgid "Yes"
-msgstr "Já"
-
-#: ../../any.pm_.c:613
-msgid "See hardware info"
-msgstr "Skoðaðu vélbúnaðarupplýsingar"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:648
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Set inn rekil fyrir %s kortið %s"
-
-#: ../../any.pm_.c:649
-#, c-format
-msgid "(module %s)"
-msgstr "(eining %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:660
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hvaða %s rekil viltu prófa?"
-
-#: ../../any.pm_.c:668
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Í sumum tilfellum þarf rekillinn %s auka viðföng svo hann virki rétt,\n"
-" þó hann virki vel í flestum tilfellum án þeirra.  Viltu setja inn auka\n"
-" viðföng eða leyfa reklinum sjálfum að leita að þeim upplýsingum sem\n"
-" hann þarf?  Stundum frystir sjálfvirk stilling vélina en það ætti ekki\n"
-"að skemma neitt."
-
-#: ../../any.pm_.c:673
-msgid "Autoprobe"
-msgstr "Stilla sjálfvirkt"
-
-#: ../../any.pm_.c:673
-msgid "Specify options"
-msgstr "Stilla handvirkt"
-
-#: ../../any.pm_.c:677
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Þú getur núna gefið upp viðföng fyrir %s eininguna."
-
-# ## skrytid
-#: ../../any.pm_.c:683
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Þú getur núna gefið upp viðföng fyrir eininguna %s.\n"
-"Viðföng eru gefin upp sem ``viðfang=gildi viðfang2=gildi2 ...''.\n"
-"Til dæmis: ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:686
-msgid "Module options:"
-msgstr "Stillingar kjarnaeininga:"
-
-#: ../../any.pm_.c:697
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Innsetning á einingu %s mistókst.\n"
-"Viltu prófa aftur með ólík viðföng?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s er nú þegar til)"
-
-#: ../../any.pm_.c:719
-msgid "This password is too simple"
-msgstr "Þetta lykilorð er of einfalt"
-
-#: ../../any.pm_.c:720
-msgid "Please give a user name"
-msgstr "Vinsamlega sláðu inn notandanafn"
-
-#: ../../any.pm_.c:721
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Notandanafnið má bara innihalda litla stafi, tölustafi, `-' og `_'"
-
-#: ../../any.pm_.c:722
-msgid "This user name is already added"
-msgstr "Þetta notandanafn er nú þegar til"
-
-#: ../../any.pm_.c:726
-msgid "Add user"
-msgstr "Bæta við notanda"
-
-#: ../../any.pm_.c:727
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Sláðu inn notanda\n"
-"%s"
-
-#: ../../any.pm_.c:728
-msgid "Accept user"
-msgstr "Samþykkja notanda"
-
-#: ../../any.pm_.c:739
-msgid "Real name"
-msgstr "Nafn notanda"
-
-#: ../../any.pm_.c:740 ../../printerdrake.pm_.c:97
-#: ../../printerdrake.pm_.c:131
-msgid "User name"
-msgstr "Notandanafn:"
-
-#: ../../any.pm_.c:743
-msgid "Shell"
-msgstr "Skel"
-
-#: ../../any.pm_.c:745
-msgid "Icon"
-msgstr ""
-
-#: ../../any.pm_.c:766
-msgid "Autologin"
-msgstr ""
-
-#: ../../any.pm_.c:767
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"If you don't want to use this feature, click on the cancel button."
-msgstr ""
-"Ég get stillt tölvuna þína til að kveikja sjálfvirkt á X við ræsingu\n"
-"Vilt þú kveikja á X við endurræsingu?"
-
-#: ../../any.pm_.c:769
-#, fuzzy
-msgid "Choose the default user:"
-msgstr "Veldu nýja stærð"
-
-#: ../../any.pm_.c:770
-#, fuzzy
-msgid "Choose the window manager to run:"
-msgstr "Veldu forritið sem þú vilt nota"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:262 ../../bootloader.pm_.c:608
-#, fuzzy, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Velkomin(n) i %s styrikerfisraesistjorann!\n"
-"\n"
-"Sladu a <TAB> til ad fa lista yfir moegulega valkosti.\n"
-"\n"
-"Til raesa einn af theim, sl du inn nafnid og sidan a <ENTER>\n"
-"eda biddu i %d sekundur thar til sjalfgefin raesing hefst.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:809
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:812
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:815
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:818
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:821
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-
-#: ../../bootloader.pm_.c:825
-msgid "not enough room in /boot"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:918
-msgid "Desktop"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:920
-msgid "Start Menu"
-msgstr ""
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "Lokauppsetning"
-
-#: ../../bootlook.pm_.c:79
-#, fuzzy
-msgid "/_File"
-msgstr "Skrár:\n"
-
-#: ../../bootlook.pm_.c:81
-msgid "/File/_New"
-msgstr ""
-
-#: ../../bootlook.pm_.c:82
-msgid "<control>N"
-msgstr ""
-
-#: ../../bootlook.pm_.c:84
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../bootlook.pm_.c:85
-msgid "<control>O"
-msgstr ""
-
-#: ../../bootlook.pm_.c:87
-msgid "/File/_Save"
-msgstr ""
-
-#: ../../bootlook.pm_.c:88
-msgid "<control>S"
-msgstr ""
-
-#: ../../bootlook.pm_.c:90
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "/File/-"
-msgstr ""
-
-#: ../../bootlook.pm_.c:93
-msgid "/File/_Quit"
-msgstr ""
-
-#: ../../bootlook.pm_.c:94
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:96
-msgid "/_Options"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-msgid "/Options/Test"
-msgstr ""
-
-#: ../../bootlook.pm_.c:99
-#, fuzzy
-msgid "/_Help"
-msgstr "Hjálp"
-
-#: ../../bootlook.pm_.c:101
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../bootlook.pm_.c:111 ../../standalone/drakgw_.c:634
-#: ../../standalone/draknet_.c:262 ../../standalone/tinyfirewall_.c:57
-#, fuzzy
-msgid "Configure"
-msgstr "Stilla X"
-
-#: ../../bootlook.pm_.c:114
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Veldu prenttengingu"
-
-#: ../../bootlook.pm_.c:121
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Hringja inn með mótaldi"
-
-#: ../../bootlook.pm_.c:131
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:134
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Skjár"
-
-#: ../../bootlook.pm_.c:137
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Skipta um skjá"
-
-#: ../../bootlook.pm_.c:140
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:144
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:169
-#, fuzzy
-msgid "Boot mode"
-msgstr "Ræsitæki"
-
-#: ../../bootlook.pm_.c:179
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:187
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:193
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:210
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:228
-#, fuzzy
-msgid "Default Runlevel"
-msgstr "Sjálfgefið"
-
-#: ../../bootlook.pm_.c:236 ../../standalone/draknet_.c:88
-#: ../../standalone/draknet_.c:120 ../../standalone/draknet_.c:184
-#: ../../standalone/draknet_.c:302 ../../standalone/draknet_.c:396
-#: ../../standalone/draknet_.c:473 ../../standalone/draknet_.c:509
-#: ../../standalone/draknet_.c:617
-msgid "OK"
-msgstr ""
-
-#: ../../bootlook.pm_.c:238 ../../install_steps_gtk.pm_.c:576
-#: ../../interactive.pm_.c:114 ../../interactive.pm_.c:269
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:357
-#: ../../my_gtk.pm_.c:360 ../../my_gtk.pm_.c:617
-#: ../../standalone/drakgw_.c:639 ../../standalone/draknet_.c:95
-#: ../../standalone/draknet_.c:127 ../../standalone/draknet_.c:295
-#: ../../standalone/draknet_.c:485 ../../standalone/draknet_.c:631
-#: ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Hætta við"
-
-#: ../../bootlook.pm_.c:315
-msgid "can not open /etc/inittab for reading: $!"
-msgstr ""
-
-#: ../../bootlook.pm_.c:369
-msgid "can not open /etc/sysconfig/autologin for reading: $!"
-msgstr ""
-
-#: ../../bootlook.pm_.c:435 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Innsetning LILO brást sökum eftirfarandi villu:"
-
-#: ../../diskdrake.pm_.c:21 ../../diskdrake.pm_.c:462
-msgid "Create"
-msgstr "Búa til"
-
-#: ../../diskdrake.pm_.c:22
-msgid "Unmount"
-msgstr "Aftengja"
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:464
-msgid "Delete"
-msgstr "Eyða"
-
-#: ../../diskdrake.pm_.c:23
-msgid "Format"
-msgstr "Forsníða"
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:653
-msgid "Resize"
-msgstr "Endurstækka"
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:462
-#: ../../diskdrake.pm_.c:518
-msgid "Type"
-msgstr "Tegund"
-
-#: ../../diskdrake.pm_.c:24 ../../diskdrake.pm_.c:539
-msgid "Mount point"
-msgstr "Tengipunktur"
-
-#: ../../diskdrake.pm_.c:38
-msgid "Write /etc/fstab"
-msgstr "Skrifa /etc/fstab"
-
-#: ../../diskdrake.pm_.c:39
-msgid "Toggle to expert mode"
-msgstr "Færa í snillingsham"
-
-#: ../../diskdrake.pm_.c:40
-msgid "Toggle to normal mode"
-msgstr "Fara í venjulegan ham"
-
-#: ../../diskdrake.pm_.c:41
-msgid "Restore from file"
-msgstr "Endurheimta frá skrá"
-
-#: ../../diskdrake.pm_.c:42
-msgid "Save in file"
-msgstr "Vista í skrá"
-
-#: ../../diskdrake.pm_.c:43
-msgid "Wizard"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:44
-msgid "Restore from floppy"
-msgstr "Endurheimta frá diskling"
-
-#: ../../diskdrake.pm_.c:45
-msgid "Save on floppy"
-msgstr "Vista á diskling"
-
-#: ../../diskdrake.pm_.c:49
-msgid "Clear all"
-msgstr "Hreinsa allt"
-
-#: ../../diskdrake.pm_.c:54
-msgid "Format all"
-msgstr "Forsníð"
-
-#: ../../diskdrake.pm_.c:55
-msgid "Auto allocate"
-msgstr "Ráðstafa skjálfkrafa"
-
-#: ../../diskdrake.pm_.c:59
-msgid "All primary partitions are used"
-msgstr "Öll aðal skráarsnið eru í notkun"
-
-#: ../../diskdrake.pm_.c:59
-msgid "I can't add any more partition"
-msgstr "Get ekki bætt við disksneiðum"
-
-#: ../../diskdrake.pm_.c:59
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Til að fá fleiri disksneiðar, vinsamlega eyddu einni til að búa til "
-"viðbótarsneið"
-
-#: ../../diskdrake.pm_.c:61
-msgid "Not enough space for auto-allocating"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:63
-msgid "Undo"
-msgstr "Endurheimta"
-
-#: ../../diskdrake.pm_.c:64
-msgid "Write partition table"
-msgstr "Skrifa sneiðatöflu"
-
-#: ../../diskdrake.pm_.c:65 ../../install_steps_interactive.pm_.c:185
-#, fuzzy
-msgid "More"
-msgstr "Færa"
-
-#: ../../diskdrake.pm_.c:116
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:116
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:116
-msgid "HFS"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:116
-msgid "SunOS"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:116
-msgid "Swap"
-msgstr "Diskminni"
-
-#: ../../diskdrake.pm_.c:117
-msgid "Empty"
-msgstr "Tóm"
-
-#: ../../diskdrake.pm_.c:117 ../../install_steps_gtk.pm_.c:407
-#: ../../mouse.pm_.c:145
-msgid "Other"
-msgstr "Annað"
-
-#: ../../diskdrake.pm_.c:123
-msgid "Filesystem types:"
-msgstr "Tegundir skráakerfa:"
-
-#: ../../diskdrake.pm_.c:132 ../../install_steps_gtk.pm_.c:577
-msgid "Details"
-msgstr "Ítarleg atriði"
-
-#: ../../diskdrake.pm_.c:147
-#, fuzzy
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Þú hefur eina stóra FAT disksneið.\n"
-"(venjulega notuð af Microsoft DOS/Windows).\n"
-"Ég legg til að þú endursníðir hana\n"
-"(smelltu á hana, síðan á \"Endursníða\")"
-
-#: ../../diskdrake.pm_.c:152
-msgid "Please make a backup of your data first"
-msgstr "Vinsamlega taktu fyrst afrit af öllum gögnum"
-
-#: ../../diskdrake.pm_.c:152 ../../diskdrake.pm_.c:170
-#: ../../diskdrake.pm_.c:179 ../../diskdrake.pm_.c:570
-#: ../../diskdrake.pm_.c:592
-msgid "Read carefully!"
-msgstr "Lestu vandlega!"
-
-#: ../../diskdrake.pm_.c:155
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:170
-msgid "Be careful: this operation is dangerous."
-msgstr ""
-
-#: ../../diskdrake.pm_.c:214 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:322 ../../standalone/diskdrake_.c:66
-msgid "Error"
-msgstr "Villa"
-
-#: ../../diskdrake.pm_.c:238 ../../diskdrake.pm_.c:748
-msgid "Mount point: "
-msgstr "Tengipunktur: "
-
-#: ../../diskdrake.pm_.c:239 ../../diskdrake.pm_.c:298
-msgid "Device: "
-msgstr "Tæki: "
-
-#: ../../diskdrake.pm_.c:240
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS drifstafur: %s (bara ágiskun)\n"
-
-#: ../../diskdrake.pm_.c:244 ../../diskdrake.pm_.c:251
-#: ../../diskdrake.pm_.c:301
-msgid "Type: "
-msgstr "Tegund: "
-
-#: ../../diskdrake.pm_.c:248
-msgid "Name: "
-msgstr ""
-
-#: ../../diskdrake.pm_.c:253
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Byrja: geiri %s\n"
-
-#: ../../diskdrake.pm_.c:254
-#, c-format
-msgid "Size: %s"
-msgstr "Stærð: %s"
-
-#: ../../diskdrake.pm_.c:256
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s geirar"
-
-#: ../../diskdrake.pm_.c:258
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Sívalningur %d til %d\n"
-
-#: ../../diskdrake.pm_.c:259
-msgid "Formatted\n"
-msgstr "Forsniðinn\n"
-
-#: ../../diskdrake.pm_.c:260
-msgid "Not formatted\n"
-msgstr "Ekki forsniðinn\n"
-
-#: ../../diskdrake.pm_.c:261
-msgid "Mounted\n"
-msgstr "Tengdur\n"
-
-#: ../../diskdrake.pm_.c:262
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake.pm_.c:264
-#, c-format
-msgid "Loopback file(s): %s\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:265
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Sjálfgefin disksneið ræst\n"
-"    (fyrir MS-DOS ræsingu, ekki fyrir LILO)\n"
-
-#: ../../diskdrake.pm_.c:267
-#, c-format
-msgid "Level %s\n"
-msgstr "Stig %s\n"
-
-#: ../../diskdrake.pm_.c:268
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Hlunkastærð %s\n"
-
-#: ../../diskdrake.pm_.c:269
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskar %s\n"
-
-#: ../../diskdrake.pm_.c:271
-#, c-format
-msgid "Loopback file name: %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:274
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:277
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:294
-msgid "Please click on a partition"
-msgstr "Smelltu á disksneið"
-
-#: ../../diskdrake.pm_.c:299
-#, c-format
-msgid "Size: %s\n"
-msgstr "Stærð: %s\n"
-
-#: ../../diskdrake.pm_.c:300
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Skilgreining: %s sívalningar, %s hausar, %s geirar\n"
-
-#: ../../diskdrake.pm_.c:302
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskar %s\n"
-
-#: ../../diskdrake.pm_.c:303
-#, fuzzy, c-format
-msgid "Partition table type: %s\n"
-msgstr "Rótardisksneið"
-
-#: ../../diskdrake.pm_.c:304
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "á gagnabraut %d id %d\n"
-
-#: ../../diskdrake.pm_.c:320
-msgid "Mount"
-msgstr "Tengipunktur"
-
-#: ../../diskdrake.pm_.c:322
-msgid "Active"
-msgstr "Virk"
-
-#: ../../diskdrake.pm_.c:324
-msgid "Add to RAID"
-msgstr "Bæta við RAID"
-
-#: ../../diskdrake.pm_.c:326
-msgid "Remove from RAID"
-msgstr "Taka úr RAID"
-
-#: ../../diskdrake.pm_.c:328
-msgid "Modify RAID"
-msgstr "Breyta RAID"
-
-#: ../../diskdrake.pm_.c:330
-msgid "Add to LVM"
-msgstr "Bæta við LVM"
-
-#: ../../diskdrake.pm_.c:332
-msgid "Remove from LVM"
-msgstr "Taka úr LVM"
-
-#: ../../diskdrake.pm_.c:334
-msgid "Use for loopback"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:341
-msgid "Choose action"
-msgstr "Veldu aðgerð"
-
-#: ../../diskdrake.pm_.c:435
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Því miður get ég ekki sett /boot svona innarlega á drifið (á sívalning > "
-"1024).\n"
-"Annaðhvort notar þú LILO og það mun ekki virka, eða þú notar ekki LILO og "
-"sleppir því að hafa /boot"
-
-#: ../../diskdrake.pm_.c:439
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Disksneiðin sem þú hefur valið til að nota sem rót (/) er utan\n"
-"1024. sívalnings á harða disknum og þú hefur enga /boot sneið.\n"
-"Ef þú ætlar að nota LILO ræsistjórann skaltu muna að bæta við /boot sneið"
-
-#: ../../diskdrake.pm_.c:445
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:462 ../../diskdrake.pm_.c:464
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Nota ``%s'' í staðinn"
-
-#: ../../diskdrake.pm_.c:468
-msgid "Use ``Unmount'' first"
-msgstr "Nota ``Aftengja'' fyrst"
-
-#: ../../diskdrake.pm_.c:469 ../../diskdrake.pm_.c:513
-#, fuzzy, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "öll gögn á þessari disksneið tapast"
-
-#: ../../diskdrake.pm_.c:481
-msgid "Continue anyway?"
-msgstr "Halda samt áfram?"
-
-#: ../../diskdrake.pm_.c:486
-msgid "Quit without saving"
-msgstr "Hætta án þess að vista"
-
-#: ../../diskdrake.pm_.c:486
-msgid "Quit without writing the partition table?"
-msgstr "Hætta án þess að skrifa sneiðatöfluna?"
-
-#: ../../diskdrake.pm_.c:516
-msgid "Change partition type"
-msgstr "Breyta tegund sneiðar"
-
-#: ../../diskdrake.pm_.c:517
-#, fuzzy
-msgid "Which filesystem do you want?"
-msgstr "Hvaða sneiðtegund viltu?"
-
-#: ../../diskdrake.pm_.c:520 ../../diskdrake.pm_.c:780
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:537
-#, fuzzy, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Hvar viltu tengja tæki %s?"
-
-#: ../../diskdrake.pm_.c:538
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Hvar viltu tengja tæki %s?"
-
-#: ../../diskdrake.pm_.c:542
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:561
-#, fuzzy, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "öll gögn á þessari disksneið tapast"
-
-#: ../../diskdrake.pm_.c:563
-msgid "Formatting"
-msgstr "Forsníðing"
-
-#: ../../diskdrake.pm_.c:564
-#, fuzzy, c-format
-msgid "Formatting loopback file %s"
-msgstr "Forsníð disksneið %s"
-
-#: ../../diskdrake.pm_.c:565 ../../install_steps_interactive.pm_.c:430
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Forsníð disksneið %s"
-
-#: ../../diskdrake.pm_.c:570
-msgid "After formatting all partitions,"
-msgstr "Eftir forsníðingu allra sneiða"
-
-#: ../../diskdrake.pm_.c:570
-msgid "all data on these partitions will be lost"
-msgstr "munu öll gögn á þessum disksneiðum tapast"
-
-#: ../../diskdrake.pm_.c:576
-msgid "Move"
-msgstr "Færa"
-
-#: ../../diskdrake.pm_.c:577
-msgid "Which disk do you want to move it to?"
-msgstr "Hvaða disk viltu færa til?"
-
-#: ../../diskdrake.pm_.c:578
-msgid "Sector"
-msgstr "Geiri"
-
-#: ../../diskdrake.pm_.c:579
-msgid "Which sector do you want to move it to?"
-msgstr "Hvaða geira viltu færa gögn til?"
-
-#: ../../diskdrake.pm_.c:582
-msgid "Moving"
-msgstr "Færi"
-
-#: ../../diskdrake.pm_.c:582
-msgid "Moving partition..."
-msgstr "Færi disksneið..."
-
-#: ../../diskdrake.pm_.c:592
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Disksneiðatafla drifs %s mun verða skrifuð á disk!"
-
-#: ../../diskdrake.pm_.c:594
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Þú þarft að endurræsa áður en breytingar taka gildi"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Computing FAT filesystem bounds"
-msgstr "Reikna takmarkanir FAT skráarkerfis..."
-
-#: ../../diskdrake.pm_.c:615 ../../diskdrake.pm_.c:680
-#: ../../install_interactive.pm_.c:107
-msgid "Resizing"
-msgstr "Endursníð"
-
-#: ../../diskdrake.pm_.c:643
-#, fuzzy
-msgid "This partition is not resizeable"
-msgstr "Hvaða sneiðtegund viltu?"
-
-#: ../../diskdrake.pm_.c:648
-#, fuzzy
-msgid "All data on this partition should be backed-up"
-msgstr "öll gögn á þessari disksneið tapast"
-
-#: ../../diskdrake.pm_.c:650
-#, fuzzy, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "öll gögn á þessari disksneið tapast"
-
-#: ../../diskdrake.pm_.c:660
-msgid "Choose the new size"
-msgstr "Veldu nýja stærð"
-
-#: ../../diskdrake.pm_.c:660 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../diskdrake.pm_.c:714
-msgid "Create a new partition"
-msgstr "Búa til nýja disksneið"
-
-#: ../../diskdrake.pm_.c:740
-msgid "Start sector: "
-msgstr "Byrjunar geiri"
-
-#: ../../diskdrake.pm_.c:744 ../../diskdrake.pm_.c:819
-msgid "Size in MB: "
-msgstr "Stærð í MB: "
-
-#: ../../diskdrake.pm_.c:747 ../../diskdrake.pm_.c:822
-msgid "Filesystem type: "
-msgstr "Tegund skráakerfis:"
-
-#: ../../diskdrake.pm_.c:750
-msgid "Preference: "
-msgstr "Valkostur:"
-
-#: ../../diskdrake.pm_.c:798
-msgid "This partition can't be used for loopback"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:808
-msgid "Loopback"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:818
-msgid "Loopback file name: "
-msgstr ""
-
-#: ../../diskdrake.pm_.c:844
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:845
-#, fuzzy
-msgid "File already exists. Use it?"
-msgstr "Nafnið %s er þegar í notkun"
-
-#: ../../diskdrake.pm_.c:867 ../../diskdrake.pm_.c:883
-msgid "Select file"
-msgstr "Veljið skrá"
-
-#: ../../diskdrake.pm_.c:876
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Disksneiðin sem var tekin sem afrit er ekki af sömu stærð\n"
-"Halda áfram?"
-
-#: ../../diskdrake.pm_.c:884
-msgid "Warning"
-msgstr "Aðvörun"
-
-#: ../../diskdrake.pm_.c:885
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Settu diskling í drifið\n"
-"Öll gögn á þessum diskling tapast"
-
-#: ../../diskdrake.pm_.c:896
-msgid "Trying to rescue partition table"
-msgstr "Reyni að endurheimta disksneiðatöfluna"
-
-#: ../../diskdrake.pm_.c:905
-msgid "device"
-msgstr "tæki"
-
-#: ../../diskdrake.pm_.c:906
-msgid "level"
-msgstr "stig"
-
-#: ../../diskdrake.pm_.c:907
-msgid "chunk size"
-msgstr "stærð hlutar"
-
-#: ../../diskdrake.pm_.c:919
-msgid "Choose an existing RAID to add to"
-msgstr "Veldu RAID sem til er fyrir til að bæta við"
-
-#: ../../diskdrake.pm_.c:920 ../../diskdrake.pm_.c:946
-msgid "new"
-msgstr "ný"
-
-#: ../../diskdrake.pm_.c:944
-msgid "Choose an existing LVM to add to"
-msgstr "Veldu LVM sem til er fyrir til að bæta við"
-
-#: ../../diskdrake.pm_.c:949
-msgid "LVM name?"
-msgstr ""
-
-# ## skrytid
-#: ../../diskdrake.pm_.c:976
-msgid "Removable media automounting"
-msgstr "Sjálfvirk tenging aukatækja"
-
-#: ../../diskdrake.pm_.c:977
-msgid "Rescue partition table"
-msgstr "Bjarga sneiðatöflunni"
-
-#: ../../diskdrake.pm_.c:979
-msgid "Reload"
-msgstr "Endurhlaða"
-
-#: ../../fs.pm_.c:88 ../../fs.pm_.c:95 ../../fs.pm_.c:101 ../../fs.pm_.c:107
-#: ../../fs.pm_.c:113
-#, fuzzy, c-format
-msgid "%s formatting of %s failed"
-msgstr "gat ekki forsniðið %s"
-
-#: ../../fs.pm_.c:143
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "kann ekki að forsníða %s af tegundinni %s"
-
-#: ../../fs.pm_.c:230
-msgid "mount failed: "
-msgstr "tókst ekki að tengja: "
-
-#: ../../fs.pm_.c:242
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "villa við að aftengja %s: %s"
-
-#: ../../fsedit.pm_.c:21
-#, fuzzy
-msgid "simple"
-msgstr "Skrá"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "netþjónn"
-
-#: ../../fsedit.pm_.c:262
-msgid "Mount points must begin with a leading /"
-msgstr "Heiti tengipunkta verða að byrja á /."
-
-#: ../../fsedit.pm_.c:265
-#, fuzzy, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Það er þegar disksneið með tengipunktinn %s"
-
-#: ../../fsedit.pm_.c:273
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:285
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:286
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:287
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:369
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Villa við að opna %s til skriftar: %s"
-
-#: ../../fsedit.pm_.c:453
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Það kom upp villa. Engin tæki fundust sem unnt er að búa til ný skráakerfi "
-"á. Vinsamlegast athugaðu vélbúnaðinn í leit að orsök vandamálsins."
-
-#: ../../fsedit.pm_.c:467
-msgid "You don't have any partitions!"
-msgstr "Þú hefur ekki neinar disksneiðar"
-
-#: ../../help.pm_.c:9
-#, fuzzy
-msgid ""
-"Please choose your preferred language for installation and system usage."
-msgstr "Veldu tungumál til að nota við innsetningu og kerfisnotkun."
-
-#: ../../help.pm_.c:12
-msgid ""
-"You need to accept the terms of the above license to continue installation.\n"
-"\n"
-"\n"
-"Please click on \"Accept\" if you agree with its terms.\n"
-"\n"
-"\n"
-"Please click on \"Refuse\" if you disagree with its terms. Installation will "
-"end without modifying your current\n"
-"configuration."
-msgstr ""
-
-#: ../../help.pm_.c:22
-msgid "Choose the layout corresponding to your keyboard from the list above"
-msgstr "Veldu snið sem passar við lyklaborðið þitt frá listanum að ofan"
-
-#: ../../help.pm_.c:25
-msgid ""
-"If you wish other languages (than the one you choose at\n"
-"beginning of installation) will be available after installation, please "
-"chose\n"
-"them in list above. If you want select all, you just need to select \"All\"."
-msgstr ""
-
-#: ../../help.pm_.c:30
-msgid ""
-"Please choose \"Install\" if there are no previous version of Linux-"
-"Mandrake\n"
-"installed or if you wish to use several operating systems.\n"
-"\n"
-"\n"
-"Please choose \"Update\" if you wish to update an already installed version "
-"of Linux-Mandrake.\n"
-"\n"
-"\n"
-"Depend of your knowledge in GNU/Linux, you can choose one of the following "
-"levels to install or update your\n"
-"Linux-Mandrake operating system:\n"
-"\n"
-"\t* Recommended: if you have never installed a GNU/Linux operating system "
-"choose this. Installation will be\n"
-"\t  be very easy and you will be asked only on few questions.\n"
-"\n"
-"\n"
-"\t* Customized: if you are familiar enough with GNU/Linux, you may choose "
-"the primary usage (workstation, server,\n"
-"\t  development) of your system. You will need to answer to more questions "
-"than in \"Recommended\" installation\n"
-"\t  class, so you need to know how GNU/Linux works to choose this "
-"installation class.\n"
-"\n"
-"\n"
-"\t* Expert: if you have a good knowledge in GNU/Linux, you can choose this "
-"installation class. As in \"Customized\"\n"
-"\t  installation class, you will be able to choose the primary usage "
-"(workstation, server, development). Be very\n"
-"\t  careful before choose this installation class. You will be able to "
-"perform a higly customized installation.\n"
-"\t  Answer to some questions can be very difficult if you haven't a good "
-"knowledge in GNU/Linux. So, don't choose\n"
-"\t  this installation class unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:56
-#, fuzzy
-msgid ""
-"Select:\n"
-"\n"
-"  - Customized: If you are familiar enough with GNU/Linux, you may then "
-"choose\n"
-"    the primary usage for your machine. See below for details.\n"
-"\n"
-"\n"
-"  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-"    perform a highly customized installation. As for a \"Customized\"\n"
-"    installation class, you will be able to select the usage for your "
-"system.\n"
-"    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-"DOING!"
-msgstr ""
-"Select:\n"
-"\n"
-"  - Eftir óskum: Ef þú hefur þó nokkra reynslu meðiar with Linux, you will "
-"be able to \n"
-"select the usage for the installed system between normal, development or\n"
-"server. Choose \"Normal\" for a general purpose installation of your\n"
-"computer. You may choose \"Development\" if you will be using the computer\n"
-"primarily for software development, or choose \"Server\" if you wish to\n"
-"install a general purpose server (for mail, printing...).\n"
-"\n"
-"\n"
-"  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-"a highly customized installation, this Install Class is for you. You will\n"
-"be able to select the usage of your installed system as for \"Customized\".\n"
-
-#: ../../help.pm_.c:68
-msgid ""
-"You must now define your machine usage. Choices are:\n"
-"\n"
-"\t* Workstation: this the ideal choice if you intend to use your machine "
-"primarily for everyday use, at office or\n"
-"\t  at home.\n"
-"\n"
-"\n"
-"\t* Development: if you intend to use your machine primarily for software "
-"development, it is the good choice. You\n"
-"\t  will then have a complete collection of software installed in order to "
-"compile, debug and format source code,\n"
-"\t  or create software packages.\n"
-"\n"
-"\n"
-"\t* Server: if you intend to use this machine as a server, it is the good "
-"choice. Either a file server (NFS or\n"
-"\t  SMB), a print server (Unix style or Microsoft Windows style), an "
-"authentication server (NIS), a database\n"
-"\t  server and so on. As such, do not expect any gimmicks (KDE, GNOME, etc.) "
-"to be installed."
-msgstr ""
-
-#: ../../help.pm_.c:84
-msgid ""
-"DrakX will attempt to look for PCI SCSI adapter(s). If DrakX\n"
-"finds an SCSI adapter and knows which driver to use, it will be "
-"automatically\n"
-"installed.\n"
-"\n"
-"\n"
-"If you have no SCSI adapter, an ISA SCSI adapter or a PCI SCSI adapter that\n"
-"DrakX doesn't recognize, you will be asked if a SCSI adapter is present in "
-"your\n"
-"system. If there is no adapter present, you can click on \"No\". If you "
-"click on\n"
-"\"Yes\", a list of drivers will be presented from which you can select your\n"
-"specific adapter.\n"
-"\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for "
-"the\n"
-"options. This usually works well.\n"
-"\n"
-"\n"
-"If not, you will need to provide options to the driver. Please review the "
-"User\n"
-"Guide (chapter 3, section \"Collective informations on your hardware) for "
-"hints\n"
-"on retrieving this information from hardware documentation, from the\n"
-"manufacturer's Web site (if you have Internet access) or from Microsoft "
-"Windows\n"
-"(if you have it on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:108
-msgid ""
-"At this point, you need to choose where to install your\n"
-"Linux-Mandrake operating system on your hard drive. If it is empty or if an\n"
-"existing operating system uses all the space available on it, you need to\n"
-"partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Linux-Mandrake system.\n"
-"\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced "
-"user.\n"
-"This wizard simplifies this process. Before beginning, please consult the "
-"manual\n"
-"and take your time.\n"
-"\n"
-"\n"
-"You need at least two partitions. One is for the operating system itself and "
-"the\n"
-"other is for the virtual memory (also called Swap).\n"
-"\n"
-"\n"
-"If partitions have been already defined (from a previous installation or "
-"from\n"
-"another partitioning tool), you just need choose those to use to install "
-"your\n"
-"Linux system.\n"
-"\n"
-"\n"
-"If partitions haven't been already defined, you need to create them. \n"
-"To do that, use the wizard available above. Depending of your hard drive\n"
-"configuration, several solutions can be available:\n"
-"\n"
-"\t* Use existing partition: the wizard has detected one or more existing "
-"Linux partitions on your hard drive. If\n"
-"\t  you want to keep them, choose this option. \n"
-"\n"
-"\n"
-"\t* Erase entire disk: if you want delete all data and all partitions "
-"present on your hard drive and replace them by\n"
-"\t  your new Linux-Mandrake system, you can choose this option. Be careful "
-"with this solution, you will not be\n"
-"\t  able to revert your choice after confirmation.\n"
-"\n"
-"\n"
-"\t* Use the free space on the Windows partition: if Microsoft Windows is "
-"installed on your hard drive and takes\n"
-"\t  all space available on it, you have to create free space for Linux data. "
-"To do that you can delete your\n"
-"\t  Microsoft Windows partition and data (see \"Erase entire disk\" or "
-"\"Expert mode\" solutions) or resize your\n"
-"\t  Microsoft Windows partition. Resizing can be performed without loss of "
-"any data. This solution is\n"
-"\t  recommended if you want use both Linux-Mandrake and Microsoft Windows on "
-"same computer.\n"
-"\n"
-"\n"
-"\t  Before choosing this solution, please understand that the size of your "
-"Microsoft\n"
-"\t  Windows partition will be smaller than at present time. It means that "
-"you will have less free space under\n"
-"\t  Microsoft Windows to store your data or install new software.\n"
-"\n"
-"\n"
-"\t* Expert mode: if you want to partition manually your hard drive, you can "
-"choose this option. Be careful before\n"
-"\t  choosing this solution. It is powerful but it is very dangerous. You can "
-"lose all your data very easily. So,\n"
-"\t  don't choose this solution unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:160
-msgid ""
-"At this point, you need to choose what\n"
-"partition(s) to use to install your new Linux-Mandrake system. If "
-"partitions\n"
-"have been already defined (from a previous installation of GNU/Linux or "
-"from\n"
-"another partitioning tool), you can use existing partitions. In other "
-"cases,\n"
-"hard drive partitions must be defined.\n"
-"\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select "
-"the\n"
-"disk for partitioning by clicking on \"hda\" for the first IDE drive, \"hdb"
-"\" for\n"
-"the second or \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-"   * Clear all: this option deletes all partitions available on the selected "
-"hard drive.\n"
-"\n"
-"\n"
-"   * Auto allocate: this option allows you to automatically create Ext2 and "
-"swap partitions in free space of your\n"
-"     hard drive.\n"
-"\n"
-"\n"
-"   * Rescue partition table: if your partition table is damaged, you can try "
-"to recover it using this option. Please\n"
-"     be careful and remember that it can fail.\n"
-"\n"
-"\n"
-"   * Undo: you can use this option to cancel your changes.\n"
-"\n"
-"\n"
-"   * Reload: you can use this option if you wish to undo all changes and "
-"load your initial partitions table\n"
-"\n"
-"\n"
-"   * Wizard: If you wish to use a wizard to partition your hard drive, you "
-"can use this option. It is recommended if\n"
-"     you do not have a good knowledge in partitioning.\n"
-"\n"
-"\n"
-"   * Restore from floppy: if you have saved your partition table on a floppy "
-"during a previous installation, you can\n"
-"     recover it using this option.\n"
-"\n"
-"\n"
-"   * Save on floppy: if you wish to save your partition table on a floppy to "
-"be able to recover it, you can use this\n"
-"     option. It is strongly recommended to use this option\n"
-"\n"
-"\n"
-"   * Done: when you have finished partitioning your hard drive, use this "
-"option to save your changes.\n"
-"\n"
-"\n"
-"For information, you can reach any option using the keyboard: navigate "
-"trough the partitions using Tab and Up/Down arrows.\n"
-"\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-"           * Ctrl-c to create a new partition (when a empty partition is "
-"selected)\n"
-"\n"
-"           * Ctrl-d to delete a partition\n"
-"\n"
-"           * Ctrl-m to set the mount point\n"
-"           \n"
-"\n"
-"           \n"
-"If you are installing on a PPC Machine, you will want to create a small HFS "
-"'bootstrap' partition of at least 1MB for use\n"
-"by the yaboot bootloader. If you opt to make the partition a bit larger, say "
-"50MB, you may find it a useful place to store \n"
-"a spare kernel and ramdisk image for emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Above are listed the existing Linux partitions detected on\n"
-"your hard drive. You can keep choices make by the wizard, they are good for "
-"a\n"
-"common usage. If you change these choices, you must at least define a root\n"
-"partition (\"/\"). Don't choose a too little partition or you will not be "
-"able\n"
-"to install enough software. If you want store your data on a separate "
-"partition,\n"
-"you need also to choose a \"/home\" (only possible if you have more than "
-"one\n"
-"Linux partition available).\n"
-"\n"
-"\n"
-"For information, each partition is listed as follows: \"Name\", \"Capacity"
-"\".\n"
-"\n"
-"\n"
-"\"Name\" is coded as follow: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and "
-"\"sd\"\n"
-"if it is an SCSI hard drive.\n"
-"\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE "
-"hard drives:\n"
-"\n"
-"   * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-"   * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"\n"
-"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means "
-"\"secondary hard drive\", etc..."
-msgstr ""
-
-#: ../../help.pm_.c:258
-msgid ""
-"Choose the hard drive you want to erase to install your\n"
-"new Linux-Mandrake partition. Be careful, all data present on it will be "
-"lost\n"
-"and will not be recoverable."
-msgstr ""
-
-#: ../../help.pm_.c:263
-msgid ""
-"Click on \"OK\" if you want to delete all data and\n"
-"partitions present on this hard drive. Be careful, after clicking on \"OK\", "
-"you\n"
-"will not be able to recover any data and partitions present on this hard "
-"drive,\n"
-"including any Windows data.\n"
-"\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../help.pm_.c:273
-msgid ""
-"More than one Microsoft Windows partition have been\n"
-"detected on your hard drive. Please choose the one you want resize to "
-"install\n"
-"your new Linux-Mandrake operating system.\n"
-"\n"
-"\n"
-"For information, each partition is listed as follow; \"Linux name\", "
-"\"Windows\n"
-"name\" \"Capacity\".\n"
-"\n"
-"\"Linux name\" is coded as follow: \"hard drive type\", \"hard drive number"
-"\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and \"sd"
-"\"\n"
-"if it is an SCSI hard drive.\n"
-"\n"
-"\n"
-"\"Hard drive number\" is always a letter putted after \"hd\" or \"sd\". With "
-"IDE hard drives:\n"
-"\n"
-"   * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-"   * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means "
-"\"secondary hard drive\", etc.\n"
-"\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first "
-"disk\n"
-"or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:306
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:309
-msgid ""
-"Any partitions that have been newly defined must be\n"
-"formatted for use (formatting meaning creating a filesystem).\n"
-"\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to "
-"erase\n"
-"the data they contain. If you wish do that, please also select the "
-"partitions\n"
-"you want to format.\n"
-"\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing "
-"partitions.\n"
-"You must reformat the partitions containing the operating system (such as \"/"
-"\",\n"
-"\"/usr\" or \"/var\") but do you no have to reformat partitions containing "
-"data\n"
-"that you wish to keep (typically /home).\n"
-"\n"
-"\n"
-"Please be careful selecting partitions, after formatting, all data will be\n"
-"deleted and you will not be able to recover any of them.\n"
-"\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"\n"
-"Click on \"Cancel\" if you want to choose other partitions to install your "
-"new\n"
-"Linux-Mandrake operating system."
-msgstr ""
-
-#: ../../help.pm_.c:335
-msgid ""
-"You may now select the group of packages you wish to\n"
-"install or upgrade.\n"
-"\n"
-"\n"
-"DrakX will then check whether you have enough room to install them all. If "
-"not,\n"
-"it will warn you about it. If you want to go on anyway, it will proceed onto "
-"the\n"
-"installation of all selected groups but will drop some packages of lesser\n"
-"interest. At the bottom of the list you can select the option \n"
-"\"Individual package selection\"; in this case you will have to browse "
-"through\n"
-"more than 1000 packages..."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"You can now choose individually all the packages you\n"
-"wish to install.\n"
-"\n"
-"\n"
-"You can expand or collapse the tree by clicking on options in the left "
-"corner of\n"
-"the packages window.\n"
-"\n"
-"\n"
-"If you prefer to see packages sorted in alphabetic order, click on the icon\n"
-"\"Toggle flat and group sorted\".\n"
-"\n"
-"\n"
-"If you want not to be warned on dependencies, click on \"Automatic\n"
-"dependencies\". If you do this, note that unselecting one package may "
-"silently\n"
-"unselect several other packages which depend on it."
-msgstr ""
-
-#: ../../help.pm_.c:364
-msgid ""
-"If you have all the CDs in the list above, click Ok. If you have\n"
-"none of those CDs, click Cancel. If only some CDs are missing, unselect "
-"them,\n"
-"then click Ok."
-msgstr ""
-
-#: ../../help.pm_.c:369
-msgid ""
-"Your new Linux-Mandrake operating system is currently being\n"
-"installed. This operation should take a few minutes (it depends on size you\n"
-"choose to install and the speed of your computer).\n"
-"\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:377
-msgid ""
-"You can now test your mouse. Use buttons and wheel to verify\n"
-"if settings are good. If not, you can click on \"Cancel\" to choose another\n"
-"driver."
-msgstr ""
-
-#: ../../help.pm_.c:382
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1\n"
-"port under MS Windows is named ttyS0 under GNU/Linux."
-msgstr ""
-"Veldu tengið sem þú vilt nota.  Tengið COM1 í MS Windows er kallað\n"
-"ttyS0 í Linux, COM2 er ttyS1, o.s.frv."
-
-#: ../../help.pm_.c:386
-msgid ""
-"If you wish to connect your computer to the Internet or\n"
-"to a local network please choose the correct option. Please turn on your "
-"device\n"
-"before choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"\n"
-"If you do not have any connection to the Internet or a local network, "
-"choose\n"
-"\"Disable networking\".\n"
-"\n"
-"\n"
-"If you wish to configure the network later after installation or if you "
-"have\n"
-"finished to configure your network connection, choose \"Done\"."
-msgstr ""
-
-#: ../../help.pm_.c:399
-msgid ""
-"No modem has been detected. Please select the serial port on which it is "
-"plugged.\n"
-"\n"
-"\n"
-"For information, the first serial port (called \"COM1\" under Microsoft\n"
-"Windows) is called \"ttyS0\" under Linux."
-msgstr ""
-
-#: ../../help.pm_.c:406
-msgid ""
-"You may now enter dialup options. If you don't know\n"
-"or are not sure what to enter, the correct informations can be obtained "
-"from\n"
-"your Internet Service Provider. If you do not enter the DNS (name server)\n"
-"information here, this information will be obtained from your Internet "
-"Service\n"
-"Provider at connection time."
-msgstr ""
-
-#: ../../help.pm_.c:413
-msgid ""
-"If your modem is an external modem, please turn on it now to let DrakX "
-"detect it automatically."
-msgstr ""
-
-#: ../../help.pm_.c:416
-msgid "Please turn on your modem and choose the correct one."
-msgstr ""
-
-#: ../../help.pm_.c:419
-msgid ""
-"If you are not sure if informations above are\n"
-"correct or if you don't know or are not sure what to enter, the correct\n"
-"informations can be obtained from your Internet Service Provider. If you do "
-"not\n"
-"enter the DNS (name server) information here, this information will be "
-"obtained\n"
-"from your Internet Service Provider at connection time."
-msgstr ""
-
-#: ../../help.pm_.c:426
-#, fuzzy
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, the correct informations can be\n"
-"obtained from your Internet Service Provider."
-msgstr ""
-"Hérna geturðu stillt innhringitengingu. Ef þú ert ekki viss um hvað þú "
-"þarft,\n"
-"hafðu þá samband við þjónustuveituna til að fá þær upplýsingar."
-
-#: ../../help.pm_.c:431
-#, fuzzy
-msgid ""
-"You may now configure your network device.\n"
-"\n"
-"   * IP address: if you don't know or are not sure what to enter, ask your "
-"network administrator.\n"
-"     You should not enter an IP address if you select the option \"Automatic "
-"IP\" below.\n"
-"\n"
-"   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-"know or are not sure what to enter,\n"
-"     ask your network administrator.\n"
-"\n"
-"   * Automatic IP: if your network uses BOOTP or DHCP protocol, select this "
-"option. If selected, no value is needed in\n"
-"    \"IP address\". If you don't know or are not sure if you need to select "
-"this option, ask your network administrator."
-msgstr ""
-"Sláðu inn:\n"
-"\n"
-"  - IP vistfang: Ef þú veist ekki hvað það er, spurðu þá kerfisstjóra eða "
-"fulltrúa hjá þjónustuveitu.\n"
-"\n"
-"\n"
-"  - Netsía: \"255.255.255.0\" er mjög algeng sía. Ef þú ert ekki viss hvaða\n"
-"síu skal nota, spurðu þá kerfisstjóra eða fulltrúa þjónustuveitu.\n"
-"\n"
-"\n"
-"  - Sjálfvirkt vistfang: Ef þú ert á neti sem notar bootp eða dhcp "
-"reglurnar, veldu \n"
-"þá þennan kost. Í slíkum tilfellum þarf ekki að gefa upp neitt \"IP vistfang"
-"\".  Eins \n"
-"og með aðrar stillingar, þá væri ekki slæm hugmynd að hafa samband við "
-"kerfisstjóra.\n"
-
-#: ../../help.pm_.c:443
-#, fuzzy
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, ask your network administrator."
-msgstr ""
-"Ef NIS er notað á netinu sem þú ert á, veldu þá \"Nota NIS\". Ef þú ert "
-"ekki\n"
-"viss hvort það sé notað, spurðu þá kerfisstjóra netsins."
-
-#: ../../help.pm_.c:447
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, leave blank."
-msgstr ""
-
-#: ../../help.pm_.c:451
-msgid ""
-"You may now enter dialup options. If you're not sure what to enter, the\n"
-"correct information can be obtained from your ISP."
-msgstr ""
-"Hérna geturðu stillt innhringitengingu. Ef þú ert ekki viss um hvað þú "
-"þarft,\n"
-"hafðu þá samband við þjónustuveituna til að fá þær upplýsingar."
-
-#: ../../help.pm_.c:455
-msgid ""
-"If you will use proxies, please configure them now. If you don't know if\n"
-"you should use proxies, ask your network administrator or your ISP."
-msgstr ""
-"Ef þú notar einhverskonar sel (e. proxy), stilltu þau þá núna. Ef þú veist "
-"ekki\n"
-"hvort þú þarft að still þau, hafðu þá samband við kerfisstjóra eða "
-"þjónustuveitu."
-
-#: ../../help.pm_.c:459
-#, fuzzy
-msgid ""
-"You can install cryptographic package if your internet connection has been\n"
-"set up correctly. First choose a mirror where you wish to download packages "
-"and\n"
-"after that select the packages to install.\n"
-"\n"
-"\n"
-"Note you have to select mirror and cryptographic packages according\n"
-"to your legislation."
-msgstr ""
-"Þú getur núna náð í dulritunarhugbúnað ef Internet tengingin þín er rétt\n"
-"upp sett.  Fyrst velur þú þá spegilvél þaðan sem þú vilt sækja hugbúnaðinn\n"
-"og síðan velur þú þá pakka sem þú vilt sækja og setja inn.\n"
-"\n"
-"Athugaðu að velja spegilvél og dulritunarhugbúnað samkvæmt því sem lög "
-"leyfa\n"
-"á Íslandi eða hvar sem þú ert núna að nota tölvuna."
-
-#: ../../help.pm_.c:468
-msgid "You can now select your timezone according to where you live."
-msgstr ""
-
-#: ../../help.pm_.c:471
-#, fuzzy
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage\n"
-"Time) and translates it in local time according to the time zone you have\n"
-"selected.\n"
-"\n"
-"\n"
-"If you use Microsoft Windows on this computer, choose \"No\"."
-msgstr ""
-"Hérna velur þú tímasvæðið sem gildir þar sem þú býrð.\n"
-"\n"
-"\n"
-"Linux notar GMT eða \"Greenwich Mean Time\" og breytir þeim tíma\n"
-"síðan í staðartíma samkvæmt því tímasvæði sem þú velur."
-
-#: ../../help.pm_.c:479
-msgid ""
-"You may now choose which services you want to start at boot time.\n"
-"\n"
-"\n"
-"When your mouse comes over an item, a small balloon help will popup which\n"
-"describes the role of the service.\n"
-"\n"
-"\n"
-"Be very careful in this step if you intend to use your machine as a server: "
-"you\n"
-"will probably want not to start any services that you don't need. Please\n"
-"remember that several services can be dangerous if they are enable on a "
-"server.\n"
-"In general, select only the services that you really need."
-msgstr ""
-
-#: ../../help.pm_.c:492
-msgid ""
-"You can configure a local printer (connected to your computer) or remote\n"
-"printer (accessible via a Unix, Netware or Microsoft Windows network)."
-msgstr ""
-
-#: ../../help.pm_.c:496
-msgid ""
-"If you wish to be able to print, please choose one printing system between\n"
-"CUPS and LPR.\n"
-"\n"
-"\n"
-"CUPS is a new, powerful and flexible printing system for Unix systems (CUPS\n"
-"means \"Common Unix Printing System\"). It is the default printing system "
-"in\n"
-"Linux-Mandrake.\n"
-"\n"
-"\n"
-"LPR is the old printing system used in previous Linux-Mandrake "
-"distributions.\n"
-"\n"
-"\n"
-"If you don't have printer, click on \"None\"."
-msgstr ""
-
-#: ../../help.pm_.c:511
-msgid ""
-"GNU/Linux can deal with many types of printer. Each of these types requires\n"
-"a different setup.\n"
-"\n"
-"\n"
-"If your printer is physically connected to your computer, select \"Local\n"
-"printer\".\n"
-"\n"
-"\n"
-"If you want to access a printer located on a remote Unix machine, select\n"
-"\"Remote printer\".\n"
-"\n"
-"\n"
-"If you want to access a printer located on a remote Microsoft Windows "
-"machine\n"
-"(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-msgstr ""
-
-#: ../../help.pm_.c:527
-msgid ""
-"Please turn on your printer before continuing to let DrakX detect it.\n"
-"\n"
-"You have to enter some informations here.\n"
-"\n"
-"\n"
-"   * Name of printer: the print spooler uses \"lp\" as default printer name. "
-"So, you must have a printer named \"lp\".\n"
-"     If you have only one printer, you can use several names for it. You "
-"just need to separate them by a pipe\n"
-"     character (a \"|\"). So, if you prefer a more meaningful name, you have "
-"to put it first, eg: \"My printer|lp\".\n"
-"     The printer having \"lp\" in its name(s) will be the default printer.\n"
-"\n"
-"\n"
-"   * Description: this is optional but can be useful if several printers are "
-"connected to your computer or if you allow\n"
-"     other computers to access to this printer.\n"
-"\n"
-"\n"
-"   * Location: if you want to put some information on your\n"
-"     printer location, put it here (you are free to write what\n"
-"     you want, for example \"2nd floor\").\n"
-msgstr ""
-
-#: ../../help.pm_.c:548
-msgid ""
-"You need to enter some informations here.\n"
-"\n"
-"\n"
-"   * Name of queue: the print spooler uses \"lp\" as default printer name. "
-"So, you need have a printer named \"lp\".\n"
-"    If you have only one printer, you can use several names for it. You just "
-"need to separate them by a pipe\n"
-"    character (a \"|\"). So, if you prefer to have a more meaningful name, "
-"you have to put it first, eg: \"My printer|lp\".\n"
-"    The printer having \"lp\" in its name(s) will be the default printer.\n"
-"\n"
-"  \n"
-"   * Spool directory: it is in this directory that printing jobs are stored. "
-"Keep the default choice\n"
-"     if you don't know what to use\n"
-"\n"
-"\n"
-"   * Printer Connection: If your printer is physically connected to your "
-"computer, select \"Local printer\".\n"
-"     If you want to access a printer located on a remote Unix machine, "
-"select \"Remote lpd printer\".\n"
-"\n"
-"\n"
-"     If you want to access a printer located on a remote Microsoft Windows "
-"machine (or on Unix machine using SMB\n"
-"     protocol), select \"SMB/Windows 95/98/NT\".\n"
-"\n"
-"\n"
-"     If you want to acces a printer located on NetWare network, select "
-"\"NetWare\".\n"
-msgstr ""
-
-#: ../../help.pm_.c:573
-msgid ""
-"Your printer has not been detected. Please enter the name of the device on\n"
-"which it is connected.\n"
-"\n"
-"\n"
-"For information, most printers are connected on the first parallel port. "
-"This\n"
-"one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-"Windows."
-msgstr ""
-
-#: ../../help.pm_.c:581
-msgid "You must now select your printer in the above list."
-msgstr ""
-
-#: ../../help.pm_.c:584
-msgid ""
-"Please select the right options according to your printer.\n"
-"Please see its documentation if you don't know what choose here.\n"
-"\n"
-"\n"
-"You will be able to test your configuration in next step and you will be "
-"able to modify it if it doesn't work as you want."
-msgstr ""
-
-#: ../../help.pm_.c:591
-#, fuzzy
-msgid ""
-"You can now enter the root password for your Linux-Mandrake system.\n"
-"The password must be entered twice to verify that both password entries are "
-"identical.\n"
-"\n"
-"\n"
-"Root is the system's administrator and is the only user allowed to modify "
-"the\n"
-"system configuration. Therefore, choose this password carefully. \n"
-"Unauthorized use of the root account can be extemely dangerous to the "
-"integrity\n"
-"of the system, its data and other system connected to it.\n"
-"\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. It should never be written down.\n"
-"\n"
-"\n"
-"Do not make the password too long or complicated, though: you must be able "
-"to\n"
-"remember it without too much effort."
-msgstr ""
-"Hérna býrðu til rótarlykilorð fyrir Linux Mandrake kerfið (lykilorð\n"
-"ofurpaursins :-). Þú verður að slá lykilorðið inn tvisvar til að \n"
-"staðfesta það (svo það verði örugglega það lykilorð sem þú ætlast til).\n"
-"\n"
-"\n"
-"Rótin (root) er stjórnandi kerfisins (kerfisstjóri) og eini notandinn\n"
-"sem breytt getur stýriskrám.  Veldu lykilorðið því vandlega.  Óheimil\n"
-"notkun á rótaraðgangi að kerfinu getur orðið mjög skaðleg uppsetningu\n"
-"og gögnum í kerfinu ásamt öðrum tölvum sem eru tengdar við þessa.\n"
-"Lykilorðið ætti að vera hæfileg blanda af bókstöfum og tölustöfum og\n"
-"minnst 8 stafa langt.  Þú ættir *ekki* að skrifa það niður og ættir\n"
-"því ekki að hafa það of langt eða of flókið því þá eykst hættan á\n"
-"á því að þú gleymir því.  Þú þarft að geta munað hvaða lykilorð\n"
-"gefur rótaraðgang til að geta breytt uppsetningu og stillingum."
-
-#: ../../help.pm_.c:609
-msgid ""
-"To enable a more secure system, you should select \"Use shadow file\" and\n"
-"\"Use MD5 passwords\"."
-msgstr ""
-"Ef þú vilt gera kerfið öruggara þá ættir þú að velja \"Nota skuggaskrá\" og\n"
-"\"Nota MD5 lykilorð\"."
-
-#: ../../help.pm_.c:613
-msgid ""
-"If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n"
-"network administrator."
-msgstr ""
-"Ef NIS er notað á netinu sem þú ert á, veldu þá \"Nota NIS\". Ef þú ert "
-"ekki\n"
-"viss hvort það sé notað, spurðu þá kerfisstjóra netsins."
-
-# ## skrytid
-#: ../../help.pm_.c:617
-msgid ""
-"You may now create one or more \"regular\" user account(s), as\n"
-"opposed to the \"privileged\" user account, root. You can create\n"
-"one or more account(s) for each person you want to allow to use\n"
-"the computer. Note that each user account will have its own\n"
-"preferences (graphical environment, program settings, etc.)\n"
-"and its own \"home directory\", in which these preferences are\n"
-"stored.\n"
-"\n"
-"\n"
-"First of all, create an account for yourself! Even if you will be the only "
-"user\n"
-"of the machine, you may NOT connect as root for daily use of the system: "
-"it's a\n"
-"very high security risk. Making the system unusable is very often a typo "
-"away.\n"
-"\n"
-"\n"
-"Therefore, you should connect to the system using the user account\n"
-"you will have created here, and login as root only for administration\n"
-"and maintenance purposes."
-msgstr ""
-"You may now create one or more \"regular\" user account(s), as\n"
-"opposed to the \"privileged\" user account, root. You can create\n"
-"one or more account(s) for each person you want to allow to use\n"
-"the computer. Note that each user account will have its own\n"
-"preferences (graphical environment, program settings, etc.)\n"
-"and its own \"home directory\", in which these preferences are\n"
-"stored.\n"
-"\n"
-"\n"
-"First of all, create an account for yourself! Even if you will be the only "
-"user\n"
-"of the machine, you may NOT connect as root for daily use of the system: "
-"it's a\n"
-"very high security risk. Making the system unusable is very often a typo "
-"away.\n"
-"\n"
-"\n"
-"Therefore, you should connect to the system using the user account\n"
-"you will have created here, and login as root only for administration\n"
-"and maintenance purposes."
-
-#: ../../help.pm_.c:636
-msgid ""
-"Creating a boot disk is strongly recommended. If you can't\n"
-"boot your computer, it's the only way to rescue your system without\n"
-"reinstalling it."
-msgstr ""
-
-#: ../../help.pm_.c:641
-#, fuzzy
-msgid ""
-"You need to indicate where you wish\n"
-"to place the information required to boot to GNU/Linux.\n"
-"\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of\n"
-"drive (MBR)\"."
-msgstr ""
-"Hér gefur þú upp hvar þú vilt láta þær upplýsingar sem\n"
-"þarf til að ræsa Linux.\n"
-"\n"
-"\n"
-"Veldu \"Í ræsifærsluna (MBR)\" nema þú vitir nákvæmlega\n"
-"hvað þú ert að gera."
-
-#: ../../help.pm_.c:649
-#, fuzzy
-msgid ""
-"Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-" (primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-msgstr ""
-"Ef um algengar aðstæður er að ræða þá er rétt svar \"/dev/hda\"\n"
-"(aðal diskurinn á aðal IDE rásinni)."
-
-#: ../../help.pm_.c:653
-msgid ""
-"LILO (the LInux LOader) and Grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"You may also want not to give access to these other operating systems to\n"
-"anyone, in which case you can delete the corresponding entries. But\n"
-"in this case, you will need a boot disk in order to boot them!"
-msgstr ""
-
-# ## skrytid
-#: ../../help.pm_.c:665
-#, fuzzy
-msgid ""
-"LILO and grub main options are:\n"
-"  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-"partition) that contains the boot sector. Unless you know specifically\n"
-"otherwise, choose \"/dev/hda\".\n"
-"\n"
-"\n"
-"  - Delay before booting default image: Specifies the number in tenths\n"
-"of a second the boot loader should wait before booting the first image.\n"
-"This is useful on systems that immediately boot from the hard disk after\n"
-"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-"omitted or is set to zero.\n"
-"\n"
-"\n"
-"  - Video mode: This specifies the VGA text mode that should be selected\n"
-"when booting. The following values are available: \n"
-"\n"
-"    * normal: select normal 80x25 text mode.\n"
-"\n"
-"    * <number>:  use the corresponding text mode.\n"
-"\n"
-"\n"
-"  - Clean \"/tmp\" at each boot: if you want delete all files and "
-"directories\n"
-"stored in \"/tmp\" when you boot your system, select this option.\n"
-"\n"
-"\n"
-"  - Precise RAM if needed: unfortunately, there is no standard method to ask "
-"the\n"
-"BIOS about the amount of RAM present in your computer. As consequence, Linux "
-"may\n"
-"fail to detect your amount of RAM correctly. If this is the case, you can\n"
-"specify the correct amount or RAM here. Please note that a difference of 2 "
-"or 4\n"
-"MB between detected memory and memory present in your system is normal."
-msgstr ""
-"LILO main options are:\n"
-"  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-"partition) that contains the boot sector. Unless you know specifically\n"
-"otherwise, choose \"/dev/hda\".\n"
-"\n"
-"\n"
-"  - Linear: Generate linear sector addresses instead of\n"
-"sector/head/cylinder addresses. Linear addresses are translated at run\n"
-"time and do not depend on disk geometry. Note that boot disks may not be\n"
-"portable if \"linear\" is used, because the BIOS service to determine the\n"
-"disk geometry does not work reliably for floppy  disks. When using\n"
-"\"linear\" with large disks, /sbin/lilo may generate references to\n"
-"inaccessible disk areas, because 3D sector addresses are not known\n"
-"before boot time.\n"
-"\n"
-"\n"
-"  - Compact: Tries to merge read requests for adjacent sectors into a\n"
-"single read request. This drastically reduces load time and keeps the\n"
-"map smaller. Using \"compact\" is especially recommended when booting from\n"
-"a floppy disk.\n"
-"\n"
-"\n"
-"  - Delay before booting default image: Specifies the number in tenths\n"
-"of a second the boot loader should wait before booting the first image.\n"
-"This is useful on systems that immediately boot from the hard disk after\n"
-"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-"omitted or is set to zero.\n"
-"\n"
-"\n"
-"  - Video mode: This specifies the VGA text mode that should be selected\n"
-"when booting. The following values are available: \n"
-"    * normal: select normal 80x25 text mode.\n"
-"    * <number>:  use the corresponding text mode."
-
-#: ../../help.pm_.c:697
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n"
-"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"Yaboot main options are:\n"
-"\n"
-"\n"
-"  - Init Message: A simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-"\n"
-"  - Boot Device: Indicate where you want to place the information required "
-"to \n"
-"boot to GNU/Linux. Generally, you will have setup a bootstrap partition "
-"earlier \n"
-"to hold this information.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: Unlike LILO, there are two delays available with \n"
-"yaboot.  The first delay is measured in seconds and at this point you can \n"
-"choose between CD, OF boot, MacOS, or Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: This timeout is similar to the LILO boot delay.  "
-"After \n"
-"selecting Linux, you will have this delay in 0.1 seconds before your "
-"default\n"
-"kernel description is selected.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: Checking this option will allow you to choose 'C' for "
-"CD at\n"
-"the first boot prompt.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: Checking this option will allow you to choose 'N' for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-"\n"
-"  - Default OS: You can select which OS will boot by default when the Open "
-"Firmware \n"
-"Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:738
-msgid ""
-"You can add additional entries for yaboot, either for other operating "
-"systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"\n"
-"For other OS's - the entry consists only of a label and the root partition.\n"
-"\n"
-"\n"
-"For Linux, there are a few possible options: \n"
-"\n"
-"\n"
-"  - Label: This is simply the name will type at the yaboot prompt to select "
-"this \n"
-"boot option.\n"
-"\n"
-"\n"
-"  - Image: This would be the name of the kernel to boot.  Typically vmlinux "
-"or\n"
-"a variation of vmlinux with an extension.\n"
-"\n"
-"\n"
-"  - Root: The root device or '/' for your Linux installation.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: On Apple hardware, the kernel append option is used quite often "
-"to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button "
-"emulation\n"
-"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The "
-"following \n"
-"are some examples:\n"
-"\n"
-"\n"
-"\t\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: This option can be used either to load initial modules, before "
-"the boot \n"
-"device is available, or to load a ramdisk image for an emergency boot "
-"situation.\n"
-"\n"
-"\n"
-"  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you "
-"should need\n"
-"to allocate a large ramdisk, this option can be used.\n"
-"\n"
-"\n"
-"  - Read-write: Normally the 'root' partition is initially brought up read-"
-"only, to allow\n"
-"a filesystem check before the system becomes 'live'.  You can override this "
-"option here.\n"
-"\n"
-"\n"
-"  - NoVideo: Should the Apple video hardware prove to be exceptionally "
-"problematic, you can\n"
-"select this option to boot in 'novideo' mode, with native framebuffer "
-"support.\n"
-"\n"
-"\n"
-"  - Default: Selects this entry as being the default Linux selection, "
-"selectable by just\n"
-"pressing ENTER at the yaboot prompt.  This entry will also be highlighted "
-"with a '*', if you\n"
-"press TAB to see the boot selections."
-msgstr ""
-
-#: ../../help.pm_.c:793
-msgid ""
-"SILO is a bootloader for SPARC: it is able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"You may also want not to give access to these other operating systems to\n"
-"anyone, in which case you can delete the corresponding entries. But\n"
-"in this case, you will need a boot disk in order to boot them!"
-msgstr ""
-
-# ## skrytid
-#: ../../help.pm_.c:805
-#, fuzzy
-msgid ""
-"SILO main options are:\n"
-"  - Bootloader installation: Indicate where you want to place the\n"
-"information required to boot to GNU/Linux. Unless you know exactly\n"
-"what you are doing, choose \"First sector of drive (MBR)\".\n"
-"\n"
-"\n"
-"  - Delay before booting default image: Specifies the number in tenths\n"
-"of a second the boot loader should wait before booting the first image.\n"
-"This is useful on systems that immediately boot from the hard disk after\n"
-"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-"omitted or is set to zero."
-msgstr ""
-"LILO main options are:\n"
-"  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-"partition) that contains the boot sector. Unless you know specifically\n"
-"otherwise, choose \"/dev/hda\".\n"
-"\n"
-"\n"
-"  - Linear: Generate linear sector addresses instead of\n"
-"sector/head/cylinder addresses. Linear addresses are translated at run\n"
-"time and do not depend on disk geometry. Note that boot disks may not be\n"
-"portable if \"linear\" is used, because the BIOS service to determine the\n"
-"disk geometry does not work reliably for floppy  disks. When using\n"
-"\"linear\" with large disks, /sbin/lilo may generate references to\n"
-"inaccessible disk areas, because 3D sector addresses are not known\n"
-"before boot time.\n"
-"\n"
-"\n"
-"  - Compact: Tries to merge read requests for adjacent sectors into a\n"
-"single read request. This drastically reduces load time and keeps the\n"
-"map smaller. Using \"compact\" is especially recommended when booting from\n"
-"a floppy disk.\n"
-"\n"
-"\n"
-"  - Delay before booting default image: Specifies the number in tenths\n"
-"of a second the boot loader should wait before booting the first image.\n"
-"This is useful on systems that immediately boot from the hard disk after\n"
-"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-"omitted or is set to zero.\n"
-"\n"
-"\n"
-"  - Video mode: This specifies the VGA text mode that should be selected\n"
-"when booting. The following values are available: \n"
-"    * normal: select normal 80x25 text mode.\n"
-"    * <number>:  use the corresponding text mode."
-
-#: ../../help.pm_.c:818
-#, fuzzy
-msgid ""
-"Now it's time to configure the X Window System, which is the\n"
-"core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-"you must configure your video card and monitor. Most of these\n"
-"steps are automated, though, therefore your work may only consist\n"
-"of verifying what has been done and accept the settings :)\n"
-"\n"
-"\n"
-"When the configuration is over, X will be started (unless you\n"
-"ask DrakX not to) so that you can check and see if the\n"
-"settings suit you. If they don't, you can come back and\n"
-"change them, as many times as necessary."
-msgstr ""
-"Nú er kominn tími til að stilla X, sem er undirstaða Linux notenda- \n"
-"viðmótsins (GUI). Til að X virki, þá þarf að stilla skjákortið\n"
-"og velja viðkomandi skjá.  Þessi atriði er þó oftast stillt\n"
-"sjálfkrafa þannig að þú gætir aðeins þurft að staðfesta það\n"
-"sem Linux Mandrake vill gera :)\n"
-"\n"
-"\n"
-"Þegar uppsetningu X er lokið þá verður X þjónninn ræstur (nema\n"
-"þú biðjir DrakX að gera það ekki) svo þú getir staðfest að\n"
-"stillingarnar séu viðunnandi. Ef þú ert ekki sátt(ur) við þær X\n"
-"stillingar sem eru valdar, þá getur þú breytt þeim að eigin vild."
-
-#: ../../help.pm_.c:831
-msgid ""
-"If something is wrong in X configuration, use these options to correctly\n"
-"configure the X Window System."
-msgstr ""
-"Ef eitthvað kemur upp á í X, notaðu þá þessar stillingar til að stilla\n"
-"það aftur."
-
-#: ../../help.pm_.c:835
-msgid ""
-"If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n"
-"\"No\"."
-msgstr ""
-"Ef þú vilt myndrænt innstimplunarviðmót, veldu þá \"Já\". Ef ekki, veldu\n"
-"þá \"Nei\"."
-
-#: ../../help.pm_.c:839
-msgid ""
-"You can choose a security level for your system. Please refer to the manual "
-"for complete\n"
-"  information. Basically, if you don't know what to choose, keep the default "
-"option.\n"
-msgstr ""
-
-#: ../../help.pm_.c:844
-msgid ""
-"Your system is going to reboot.\n"
-"\n"
-"After rebooting, your new Linux Mandrake system will load automatically.\n"
-"If you want to boot into another existing operating system, please read\n"
-"the additional instructions."
-msgstr ""
-"Tölvan verður núna endurræst.\n"
-"\n"
-"Linux Mandrake verður sjálfkrafa keyrt upp.  Ef þú vilt hinsvegar\n"
-"keyra upp eitthvað annað stýrikerfi, lestu þá leiðbeiningarnar\n"
-"sem fylgja."
-
-#: ../../install2.pm_.c:37
-msgid "Choose your language"
-msgstr "Veldu tungumál"
-
-#: ../../install2.pm_.c:38
-msgid "Select installation class"
-msgstr "Veldu innsetningarflokk"
-
-#: ../../install2.pm_.c:39
-#, fuzzy
-msgid "Hard drive detection"
-msgstr "Nota fínstillingar á hörðum disk(um)"
-
-#: ../../install2.pm_.c:40
-msgid "Configure mouse"
-msgstr "Tilgreindu mús"
-
-#: ../../install2.pm_.c:41
-msgid "Choose your keyboard"
-msgstr "Veldu lyklaborð"
-
-#: ../../install2.pm_.c:42
-msgid "Security"
-msgstr ""
-
-#: ../../install2.pm_.c:43
-msgid "Setup filesystems"
-msgstr "Setja upp skráarkerfi"
-
-#: ../../install2.pm_.c:44
-msgid "Format partitions"
-msgstr "Forsníða disksneiðar"
-
-#: ../../install2.pm_.c:45
-msgid "Choose packages to install"
-msgstr "Veldu pakka til að setja inn"
-
-#: ../../install2.pm_.c:46
-msgid "Install system"
-msgstr "Setja kerfið inn"
-
-#: ../../install2.pm_.c:47 ../../install_steps_interactive.pm_.c:894
-#: ../../install_steps_interactive.pm_.c:895
-msgid "Set root password"
-msgstr "Ákveða rótarlykilorð"
-
-#: ../../install2.pm_.c:48
-msgid "Add a user"
-msgstr "Bæta við notanda"
-
-#: ../../install2.pm_.c:49
-msgid "Configure networking"
-msgstr "Stilla nettengingu"
-
-#: ../../install2.pm_.c:51 ../../install_steps_interactive.pm_.c:818
-msgid "Summary"
-msgstr ""
-
-#: ../../install2.pm_.c:52
-#, fuzzy
-msgid "Configure services"
-msgstr "Setja upp prentara"
-
-#: ../../install2.pm_.c:54
-msgid "Create a bootdisk"
-msgstr "Búa til ræsidiskling"
-
-#: ../../install2.pm_.c:56
-msgid "Install bootloader"
-msgstr "Setja inn ræsihlaðara"
-
-#: ../../install2.pm_.c:57
-msgid "Configure X"
-msgstr "Stilla X"
-
-#: ../../install2.pm_.c:58
-msgid "Exit install"
-msgstr "Hætta innsetningu"
-
-#: ../../install_any.pm_.c:402
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:433
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Get ekki notað útsendingu án NIS léns"
-
-#: ../../install_any.pm_.c:676
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Settu tóman diskling í drif %s"
-
-#: ../../install_any.pm_.c:680
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:690
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:712
-msgid "Error reading file $f"
-msgstr "Villa við lestur skráarinnar $f"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:310
-#: ../../interactive.pm_.c:99 ../../interactive.pm_.c:114
-#: ../../interactive.pm_.c:269 ../../interactive_newt.pm_.c:166
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:356
-#: ../../my_gtk.pm_.c:617 ../../my_gtk.pm_.c:640
-msgid "Ok"
-msgstr "Í lagi"
-
-#: ../../install_gtk.pm_.c:423
-#, fuzzy
-msgid "Please test the mouse"
-msgstr "Hvernig mús ertu með?"
-
-#: ../../install_gtk.pm_.c:424 ../../standalone/mousedrake_.c:132
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "Hvernig mús ertu með?"
-
-#: ../../install_gtk.pm_.c:425 ../../standalone/mousedrake_.c:133
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:41
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Þú verður að hafa rótarsneið fyrir Linux.  Búðu því annaðhvort\n"
-"til rótarsneið eða veldu sneið sem nú þegar er til á disknum.\n"
-"Veldu síðan ``Tengipunktur'' og sláðu inn `/'"
-
-#: ../../install_interactive.pm_.c:46 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Þú verður að hafa diskminni"
-
-#: ../../install_interactive.pm_.c:47 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Þú hefur ekkert diskminni\n"
-"\n"
-"Halda samt áfram?"
-
-#: ../../install_interactive.pm_.c:68
-#, fuzzy
-msgid "Use free space"
-msgstr "Notandanafn:"
-
-#: ../../install_interactive.pm_.c:70
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:78
-#, fuzzy
-msgid "Use existing partition"
-msgstr "Forsníð disksneið %s"
-
-#: ../../install_interactive.pm_.c:80
-#, fuzzy
-msgid "There is no existing partition to use"
-msgstr "Reyni að endurheimta disksneiðatöfluna"
-
-#: ../../install_interactive.pm_.c:87
-msgid "Use the Windows partition for loopback"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:90
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Hvaða disksneið vilt þú nota sem rótardisksneið"
-
-#: ../../install_interactive.pm_.c:92
-#, fuzzy
-msgid "Choose the sizes"
-msgstr "Veldu nýja stærð"
-
-#: ../../install_interactive.pm_.c:93
-#, fuzzy
-msgid "Root partition size in MB: "
-msgstr "Rótardisksneið"
-
-#: ../../install_interactive.pm_.c:94
-#, fuzzy
-msgid "Swap partition size in MB: "
-msgstr "Stærð í MB: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:105
-#, fuzzy
-msgid "Which partition do you want to resize?"
-msgstr "Hvaða sneiðtegund viltu?"
-
-#: ../../install_interactive.pm_.c:107
-#, fuzzy
-msgid "Computing Windows filesystem bounds"
-msgstr "Reikna takmarkanir FAT skráarkerfis..."
-
-#: ../../install_interactive.pm_.c:110
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:113
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:114
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"AÐVÖRUN\n"
-"\n"
-"DrakX þarf núna að endurgera Windows sneiðina. Athugið: Þetta getur haft "
-"alvarlegar\n"
-"afleiðingar í för með sér. Ef þú ert ekki búin(n) að því, þá ættir þú fyrst "
-"að\n"
-"keyra scandisk (og jafnvel líka defrag) á þessa sneið og taka síðan afrit "
-"af\n"
-"gögnunum þínum.\n"
-"Sláðu á 'Í lagi' til að halda áfram."
-
-#: ../../install_interactive.pm_.c:123
-#, fuzzy
-msgid "Which size do you want to keep for windows on"
-msgstr "Hvaða geira viltu færa gögn til?"
-
-#: ../../install_interactive.pm_.c:124
-#, fuzzy, c-format
-msgid "partition %s"
-msgstr "Rótardisksneið"
-
-#      ******************************************
-#      *****   Byrjaði hérna 4. jan 2000  *******
-#      ***  ATH: Það er sumt eftir fyrir ofan ***
-#      ******************************************
-#
-#: ../../install_interactive.pm_.c:130
-#, fuzzy, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Sjálfvirk endurstækkun brást"
-
-#: ../../install_interactive.pm_.c:145
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:151
-msgid "Erase entire disk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:151
-msgid "Remove Windows(TM)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:154
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:157
-#, fuzzy, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "öll gögn á þessari disksneið tapast"
-
-#: ../../install_interactive.pm_.c:165
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "Forsníð disksneið %s"
-
-#: ../../install_interactive.pm_.c:169
-msgid "Use fdisk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:172
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:201
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Þú hefur ekki neinar disksneiðar"
-
-#: ../../install_interactive.pm_.c:217
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Get ekki bætt við disksneiðum"
-
-#: ../../install_interactive.pm_.c:221
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy, c-format
-msgid "Partitioning failed: %s"
-msgstr "Rótardisksneið"
-
-#: ../../install_interactive.pm_.c:232
-msgid "Bringing up the network"
-msgstr "Keyri upp netið"
-
-#: ../../install_interactive.pm_.c:237
-#, fuzzy
-msgid "Bringing down the network"
-msgstr "Keyri upp netið"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Óþekkt villa kom upp sem ekki er hægt að meðhöndla.\n"
-"Haltu áfram á eigin ábyrgð."
-
-#: ../../install_steps.pm_.c:203
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "%s tengipunktur er nú þegar til"
-
-#: ../../install_steps.pm_.c:385
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-
-#: ../../install_steps.pm_.c:451
-#, fuzzy, c-format
-msgid "Welcome to %s"
-msgstr "Velkomin(n) í tölvuþrjótinn"
-
-#: ../../install_steps.pm_.c:634
-msgid "No floppy drive available"
-msgstr "Ekkert disklingadrif aðgengilegt"
-
-#: ../../install_steps_auto_install.pm_.c:51
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Hef skref `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Veldu þá stærð sem þú vilt setja inn"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Heildarstærð: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:437
-#, c-format
-msgid "Version: %s\n"
-msgstr "Útgáfa: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:438
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Stærð: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:337
-#: ../../install_steps_interactive.pm_.c:520
-msgid "Choose the packages you want to install"
-msgstr "Veldu pakkana sem þú vilt setja inn"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../install_steps_gtk.pm_.c:340
-msgid "Info"
-msgstr "Upplýsingar"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:345
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install"
-msgstr "Innsetning"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:558
-#: ../../install_steps_interactive.pm_.c:675
-msgid "Installing"
-msgstr "Set inn"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Vinsamlegast hinkrið, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:570
-msgid "Time remaining "
-msgstr "Tími eftir "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Heildar tími "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:675
-msgid "Preparing installation"
-msgstr "Undirbý innsetningu"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:618
-#, c-format
-msgid "Installing package %s"
-msgstr "Set inn pakka %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:695
-#: ../../install_steps_gtk.pm_.c:699
-msgid "Go on anyway?"
-msgstr "Viltu samt halda áfram?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:695
-msgid "There was an error ordering packages:"
-msgstr "Það kom upp villa við að raða pökkum:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Nota þá X uppsetningu sem er til?"
-
-#: ../../install_steps_gtk.pm_.c:142
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Linux-Mandrake. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:156
-#, fuzzy
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Vinsamlega tilgreindu eftirfarandi"
-
-#: ../../install_steps_gtk.pm_.c:222
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:224
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:229
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:235
-#, fuzzy
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Þú munt geta valið af meiri nákvæmni í næsta skrefi"
-
-#: ../../install_steps_gtk.pm_.c:237
-#, fuzzy
-msgid "Percentage of packages to install"
-msgstr "Veldu pakka til að setja inn"
-
-#: ../../install_steps_gtk.pm_.c:285 ../../install_steps_interactive.pm_.c:599
-msgid "Package Group Selection"
-msgstr "Val á pakkahóp"
-
-#: ../../install_steps_gtk.pm_.c:305 ../../install_steps_interactive.pm_.c:614
-#, fuzzy
-msgid "Individual package selection"
-msgstr "Val á pakkahóp"
-
-#: ../../install_steps_gtk.pm_.c:349
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "Expand Tree"
-msgstr "Opna tré"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "Collapse Tree"
-msgstr "Loka tré"
-
-#: ../../install_steps_gtk.pm_.c:418
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "Bad package"
-msgstr "Skemmdur pakki"
-
-#: ../../install_steps_gtk.pm_.c:436
-#, c-format
-msgid "Name: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:439
-#, c-format
-msgid "Importance: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:448 ../../install_steps_interactive.pm_.c:578
-#, fuzzy, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Heildarstærð: "
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:471
-#, fuzzy
-msgid "The following packages are going to be installed"
-msgstr "Eftirfarandi pakkar verða fjarlægðir"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "The following packages are going to be removed"
-msgstr "Eftirfarandi pakkar verða fjarlægðir"
-
-#: ../../install_steps_gtk.pm_.c:482
-msgid "You can't select/unselect this package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:501
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:507
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:510
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:563
-msgid "Estimating"
-msgstr "Áætla"
-
-#: ../../install_steps_gtk.pm_.c:582
-#, fuzzy
-msgid "Please wait, preparing installation"
-msgstr "Undirbý innsetningu"
-
-#: ../../install_steps_gtk.pm_.c:613
-#, c-format
-msgid "%d packages"
-msgstr "%d pakkar"
-
-#: ../../install_steps_gtk.pm_.c:652
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:680 ../../install_steps_interactive.pm_.c:163
-#, fuzzy
-msgid "Accept"
-msgstr "Samþykkja notanda"
-
-#: ../../install_steps_gtk.pm_.c:680 ../../install_steps_interactive.pm_.c:163
-#, fuzzy
-msgid "Refuse"
-msgstr "Endurstækka"
-
-#: ../../install_steps_gtk.pm_.c:681
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:699
-#, fuzzy
-msgid "There was an error installing packages:"
-msgstr "Það kom upp villa við að raða pökkum:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Villa kom upp"
-
-#: ../../install_steps_interactive.pm_.c:55
-#, fuzzy
-msgid "Please, choose a language to use."
-msgstr "Hvernig mús ertu með?"
-
-#: ../../install_steps_interactive.pm_.c:56
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:68
-#: ../../install_steps_interactive.pm_.c:613
-msgid "All"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:86
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:87
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Linux-"
-"Mandrake distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Linux-Mandrake distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Linux-Mandrake sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:182
-#: ../../install_steps_interactive.pm_.c:822
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Lyklaborð"
-
-#: ../../install_steps_interactive.pm_.c:183
-#: ../../standalone/keyboarddrake_.c:29
-#, fuzzy
-msgid "Please, choose your keyboard layout."
-msgstr "Hvaða lyklaborðsuppsetningu viltu?"
-
-#: ../../install_steps_interactive.pm_.c:184
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:201
-msgid "Install Class"
-msgstr "Innsetningaraðferð"
-
-#: ../../install_steps_interactive.pm_.c:201
-#, fuzzy
-msgid "Which installation class do you want?"
-msgstr "Hverskonar innsetningaraðferð viltu?"
-
-#: ../../install_steps_interactive.pm_.c:203
-#, fuzzy
-msgid "Install/Update"
-msgstr "Innsetning/Uppfærsla"
-
-#: ../../install_steps_interactive.pm_.c:203
-#, fuzzy
-msgid "Is this an install or an update?"
-msgstr "Er þetta innsetning eða uppfærsla?"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Recommended"
-msgstr "Auðvelda"
-
-#: ../../install_steps_interactive.pm_.c:215
-#: ../../install_steps_interactive.pm_.c:218
-msgid "Expert"
-msgstr "F. snillinga"
-
-#: ../../install_steps_interactive.pm_.c:226
-#, fuzzy
-msgid "Update"
-msgstr "Uppfærsla"
-
-#: ../../install_steps_interactive.pm_.c:238 ../../standalone/mousedrake_.c:41
-#, fuzzy
-msgid "Please, choose the type of your mouse."
-msgstr "Hvernig mús ertu með?"
-
-#: ../../install_steps_interactive.pm_.c:244 ../../standalone/mousedrake_.c:57
-msgid "Mouse Port"
-msgstr "Músartengi"
-
-#: ../../install_steps_interactive.pm_.c:245 ../../standalone/mousedrake_.c:58
-#, fuzzy
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Við hvaða raðtengi er músin þín tengd?"
-
-#: ../../install_steps_interactive.pm_.c:253
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:255
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:256
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:275
-msgid "Configuring PCMCIA cards..."
-msgstr "Stilli PCMCIA kort..."
-
-#: ../../install_steps_interactive.pm_.c:275
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:280
-#, fuzzy
-msgid "Configuring IDE"
-msgstr "Uppsetning"
-
-#: ../../install_steps_interactive.pm_.c:280
-msgid "IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:295
-msgid "no available partitions"
-msgstr "engar reiðubúnar disksneiðar"
-
-#: ../../install_steps_interactive.pm_.c:298
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:306
-msgid "Choose the mount points"
-msgstr "Veldu tengipunktana"
-
-#: ../../install_steps_interactive.pm_.c:323
-#, fuzzy, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ég get ekki lesið disksneiðatöflu þína, hún er of skemmd fyrir mig :-(\n"
-"Ég mun reyna að halda áfram með því að hreinsa skemmdar disksneiðar"
-
-#: ../../install_steps_interactive.pm_.c:336
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake gat ekki lesið sneiðatöfluna.\n"
-"Haltu áfram á eigin ábyrgð!"
-
-#: ../../install_steps_interactive.pm_.c:361
-msgid "Root Partition"
-msgstr "Rótardisksneið"
-
-#: ../../install_steps_interactive.pm_.c:362
-msgid "What is the root partition (/) of your system?"
-msgstr "Hver er rótardisksneið (/) kerfisins?"
-
-#: ../../install_steps_interactive.pm_.c:376
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Þú verður að ræsa tölvuna aftur svo breytingar á sneiðatöflunni taki gildi"
-
-#: ../../install_steps_interactive.pm_.c:403
-msgid "Choose the partitions you want to format"
-msgstr "Veldu þær disksneiðar sem á að forsníða"
-
-#: ../../install_steps_interactive.pm_.c:404
-msgid "Check bad blocks?"
-msgstr "Athuga skemmdar blokkir?"
-
-#: ../../install_steps_interactive.pm_.c:427
-#, fuzzy
-msgid "Formatting partitions"
-msgstr "Forsníð disksneið %s"
-
-#: ../../install_steps_interactive.pm_.c:429
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:432
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Ekki nægjanlegt diskminni fyrir innsetningu.  Bættu við það"
-
-#: ../../install_steps_interactive.pm_.c:438
-msgid "Looking for available packages"
-msgstr "Leita að fáanlegum pökkum"
-
-#: ../../install_steps_interactive.pm_.c:444
-msgid "Finding packages to upgrade"
-msgstr "Leita að pökkum til að uppfæra"
-
-#: ../../install_steps_interactive.pm_.c:461
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:480
-#, fuzzy, c-format
-msgid "Complete (%dMB)"
-msgstr "Venjulega"
-
-#: ../../install_steps_interactive.pm_.c:480
-#, fuzzy, c-format
-msgid "Minimum (%dMB)"
-msgstr "(%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:480
-#, fuzzy, c-format
-msgid "Recommended (%dMB)"
-msgstr "Auðvelda"
-
-#: ../../install_steps_interactive.pm_.c:486
-#, fuzzy
-msgid "Custom"
-msgstr "Sérlagaða"
-
-#: ../../install_steps_interactive.pm_.c:585
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:650
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:655
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:684
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Set inn pakka %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:693
-msgid "Post-install configuration"
-msgstr "Lokauppsetning"
-
-#: ../../install_steps_interactive.pm_.c:718
-#, fuzzy
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Nú gefst þér tækifæri til að sækja hugbúnað sem ætlaður er til dulritunar.\n"
-"\n"
-"AÐVÖRUN:\n"
-"\n"
-"Þar sem lög um dulritunarhugbúnað eru mjög mismunandi eftir löndum og reglur "
-"sem settar\n"
-"eru af yfirvöldum oft strangar, þá þarf notandi slíks hugbúnaðar að ganga úr "
-"skugga\n"
-"um að viðkomandi lögsagnarumdæmi leyfi þessa gagnaflutninga, ásamt "
-"varðveislu og\n"
-"notkun á slíkum hugbúnaði.\n"
-"\n"
-"Viðskiptavinir Mandrake og/notendur Linux Mandrake skulu því sjá til þess að "
-"þeir brjóti ekki\n"
-"þau lög sem sett hafa verið í landi viðkomandi.  Ef viðkiptavinir og/eða "
-"notendur\n"
-"virða ekki þessi lög þá mega þeir búast við þeim refsiaðgerðum sem slíkar "
-"athafnir\n"
-"hafa í för með sér.\n"
-"\n"
-"Hvorki Mandrakesoft né framleiðsluaðilar eða dreifingaraðilar þeirra bera "
-"ábyrgð á\n"
-"sérstökum, óbeinum eða beinum, skaða (þ.m.t. en ekki takmarkað af,\n"
-"hagnaðartapi, viðskiptabanni eða truflun, gagnatapi og\n"
-"öðru fjárhagslegu tapi, skaðabótum eða öðrum bótum sem fyrirskipað er af "
-"dómstóli\n"
-"að skuli borgast) sökum notkunar, varðveislu, eða flutnings\n"
-"af slíkum hugbúnaði, sem viðskiptavinur og/eða notandi hafði aðgang að "
-"eftir\n"
-"að hafa samþykkt þennan samning..\n"
-"\n"
-"Þessi samningur fellur undir og skal vera túlkaður af lögum Frakklands nema\n"
-"þar sem krafist er notkun laga viðkomandi yfirvalda. \n"
-"Þessi samningur inniheldur hinsvegar ekki hverskonar lög sem bjóða upp á "
-"árekstra, \n"
-"undirstöðuatriði eða lagaákvæði sem mæla á móti. Frönsk lög\n"
-"skulu í þeim tilfellum gilda fram yfir lög viðkomandi lands.\n"
-"\n"
-"Frekari upplýsingar um þennan samning fást hjá \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena, California, 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid "Choose a mirror from which to get the packages"
-msgstr "Veldu spegilvélina þaðan sem á að sækja pakkanna"
-
-#: ../../install_steps_interactive.pm_.c:761
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Hef samband við vélina til að sækja lista yfir fáanlega pakka"
-
-#: ../../install_steps_interactive.pm_.c:764
-#, fuzzy
-msgid "Please choose the packages you want to install."
-msgstr "Veldu pakkana sem þú vilt setja inn"
-
-#: ../../install_steps_interactive.pm_.c:776
-#, fuzzy
-msgid "Which is your timezone?"
-msgstr "Á hvaða tímasvæði ertu?"
-
-#: ../../install_steps_interactive.pm_.c:778
-msgid "Is your hardware clock set to GMT?"
-msgstr "Veltu stilla tölvuklukkuna á GMT?"
-
-#: ../../install_steps_interactive.pm_.c:806 ../../printer.pm_.c:22
-#: ../../printerdrake.pm_.c:415
-#, fuzzy
-msgid "Remote CUPS server"
-msgstr "Fjartengd prentröð"
-
-#: ../../install_steps_interactive.pm_.c:807
-#, fuzzy
-msgid "No printer"
-msgstr "Staðbundinn prentari"
-
-#: ../../install_steps_interactive.pm_.c:821
-#, fuzzy
-msgid "Mouse"
-msgstr "USB mús"
-
-#: ../../install_steps_interactive.pm_.c:823
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:824 ../../printerdrake.pm_.c:344
-msgid "Printer"
-msgstr "Prentari"
-
-#: ../../install_steps_interactive.pm_.c:826
-msgid "ISDN card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:829
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:832
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:862
-#, fuzzy
-msgid "Which printing system do you want to use?"
-msgstr "Hvaða sneiðtegund viltu?"
-
-#: ../../install_steps_interactive.pm_.c:896
-msgid "No password"
-msgstr "Ekkert lykilorð"
-
-#: ../../install_steps_interactive.pm_.c:901
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Þetta lykilorð er of einfalt (verður að vera minnst %d stafa langt)"
-
-#: ../../install_steps_interactive.pm_.c:907
-msgid "Use NIS"
-msgstr "Nota NIS"
-
-#: ../../install_steps_interactive.pm_.c:907
-msgid "yellow pages"
-msgstr "Gular síður (yp)"
-
-#: ../../install_steps_interactive.pm_.c:914
-msgid "Authentification NIS"
-msgstr "Auðkenning NIS"
-
-#: ../../install_steps_interactive.pm_.c:915
-msgid "NIS Domain"
-msgstr "NIS lén"
-
-#: ../../install_steps_interactive.pm_.c:916
-msgid "NIS Server"
-msgstr "NIS þjónn"
-
-#: ../../install_steps_interactive.pm_.c:951
-#, fuzzy
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Sérsmíðaður ræsidisklingur gerir þér kleyft að ræsa Linux án þess að nota "
-"ræsistjóra\n"
-" eins og LILO. Þetta kemur að gagni ef þú vilt ekki setja upp LILO á vélinni "
-"eða ef\n"
-" annað stýrikerfi hefur fjarlægt LILO eða LILO virkar ekki með þínum "
-"vélbúnaðarstillingum.\n"
-" Ræsidiskling má einnig nota með Linux Mandrake 'rescue' disklingnum svo "
-"hægt sé að bjarja\n"
-" vélinni ef alvarleg vandamál koma upp.\n"
-"Viltu búa til ræsidiskling fyrir vélina þína?"
-
-#: ../../install_steps_interactive.pm_.c:967
-#, fuzzy
-msgid "First floppy drive"
-msgstr "Fyrsta drif"
-
-#: ../../install_steps_interactive.pm_.c:968
-#, fuzzy
-msgid "Second floppy drive"
-msgstr "Annað drif"
-
-#: ../../install_steps_interactive.pm_.c:969
-msgid "Skip"
-msgstr "Sleppa"
-
-#: ../../install_steps_interactive.pm_.c:974
-#, fuzzy
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Sérsmíðaður ræsidisklingur gerir þér kleyft að ræsa Linux án þess að nota "
-"ræsistjóra\n"
-" eins og LILO. Þetta kemur að gagni ef þú vilt ekki setja upp LILO á vélinni "
-"eða ef\n"
-" annað stýrikerfi hefur fjarlægt LILO eða LILO virkar ekki með þínum "
-"vélbúnaðarstillingum.\n"
-" Ræsidiskling má einnig nota með Linux Mandrake 'rescue' disklingnum svo "
-"hægt sé að bjarja\n"
-" vélinni ef alvarleg vandamál koma upp.\n"
-"Viltu búa til ræsidiskling fyrir vélina þína?"
-
-#: ../../install_steps_interactive.pm_.c:983
-msgid "Sorry, no floppy drive available"
-msgstr "Ekkert disklingadrif til staðar"
-
-#: ../../install_steps_interactive.pm_.c:987
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Veldu disklingadrifið sem þú vilt nota til að gera ræsidisk"
-
-#: ../../install_steps_interactive.pm_.c:991
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Settu tóman diskling í drif %s"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid "Creating bootdisk"
-msgstr "Bý til ræsidiskling..."
-
-#: ../../install_steps_interactive.pm_.c:1001
-msgid "Preparing bootloader"
-msgstr "Set upp ræsistjórann..."
-
-#: ../../install_steps_interactive.pm_.c:1010
-#, fuzzy
-msgid "Do you want to use aboot?"
-msgstr "Viltu nota SILO?"
-
-#: ../../install_steps_interactive.pm_.c:1013
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1022
-#, fuzzy
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Innsetning LILO brást sökum eftirfarandi villu:"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1038 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Lágt"
-
-#: ../../install_steps_interactive.pm_.c:1039 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Miðlungs"
-
-#: ../../install_steps_interactive.pm_.c:1040 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Hátt"
-
-#: ../../install_steps_interactive.pm_.c:1044 ../../standalone/draksec_.c:49
-msgid "Choose security level"
-msgstr "Veldu öryggisstig"
-
-#: ../../install_steps_interactive.pm_.c:1080
-msgid "Do you want to generate an auto install floppy for linux replication?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1082
-#, fuzzy, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Settu tóman diskling í drif %s"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "Creating auto install floppy"
-msgstr "Undirbý innsetningu"
-
-#: ../../install_steps_interactive.pm_.c:1156
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Sum skref eru ennþá eftir.\n"
-"\n"
-"Viltu virkilega hætta núna?"
-
-#: ../../install_steps_interactive.pm_.c:1167
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Linux-"
-"Mandrake,\n"
-"consult the Errata available from http://www.linux-mandrake.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Linux-Mandrake User's Guide."
-msgstr ""
-"Til hamingju! Innsetningu er lokið.\n"
-"Taktu disklinginn eða geisladiskinn úr drifinu og sláðu á ENTER.\n"
-"\n"
-"Á http://www.linux-mandrake.com má finna viðbætur og/eða lagfæringar\n"
-"á göllum sem gætu verið til staðar í þessari útgáfu af Linux Mandrake\n"
-" \n"
-"Frekari upplýsingar um hvernig á að stilla vélina eftir innsetninguna er að\n"
-"finna í viðeigandi kafla í Official Linux Mandrake User's Guide bókinni."
-
-#: ../../install_steps_interactive.pm_.c:1179
-#, fuzzy
-msgid "Generate auto install floppy"
-msgstr "Undirbý innsetningu"
-
-#: ../../install_steps_interactive.pm_.c:1181
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1186
-#, fuzzy
-msgid "Automated"
-msgstr "Sjálfvirkt IP"
-
-#: ../../install_steps_interactive.pm_.c:1186
-#, fuzzy
-msgid "Replay"
-msgstr "Endurhlaða"
-
-#: ../../install_steps_interactive.pm_.c:1189
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Val á pakkahóp"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Linux-Mandrake Installation %s"
-msgstr "Linux Mandrake innsetning %s"
-
-#: ../../install_steps_newt.pm_.c:33
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> milli hluta   |   <Bilslá> velur   |   <F12> næsti skjár "
-
-#: ../../interactive.pm_.c:65
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:267
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:290
-msgid "Please wait"
-msgstr "Augnablik..."
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Óljóst (%s), vertu nákvæmari\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Slæm hugmynd, reyndu aftur\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (sjálfgefið %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Þitt val? (sjálfgefið %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Þitt val? (sjálfgefið %s  sláðu inn  `none' fyrir engan) "
-
-#: ../../keyboard.pm_.c:124 ../../keyboard.pm_.c:155
-msgid "Czech (QWERTZ)"
-msgstr "Tékkneskt (QWERTZ)"
-
-#: ../../keyboard.pm_.c:125 ../../keyboard.pm_.c:138 ../../keyboard.pm_.c:158
-msgid "German"
-msgstr "Þýskt"
-
-#: ../../keyboard.pm_.c:126
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:127 ../../keyboard.pm_.c:164
-msgid "Spanish"
-msgstr "Spænskt"
-
-#: ../../keyboard.pm_.c:128 ../../keyboard.pm_.c:165
-msgid "Finnish"
-msgstr "Finnskt"
-
-#: ../../keyboard.pm_.c:129 ../../keyboard.pm_.c:139 ../../keyboard.pm_.c:166
-msgid "French"
-msgstr "Franskt"
-
-#: ../../keyboard.pm_.c:130 ../../keyboard.pm_.c:187
-msgid "Norwegian"
-msgstr "Norkst"
-
-#: ../../keyboard.pm_.c:131
-msgid "Polish"
-msgstr "Pólskt"
-
-#: ../../keyboard.pm_.c:132 ../../keyboard.pm_.c:192
-msgid "Russian"
-msgstr "Rússneskt"
-
-#: ../../keyboard.pm_.c:133 ../../keyboard.pm_.c:203
-msgid "UK keyboard"
-msgstr "Breskt lyklaborð"
-
-#: ../../keyboard.pm_.c:134 ../../keyboard.pm_.c:137 ../../keyboard.pm_.c:204
-msgid "US keyboard"
-msgstr "Bandarískt lyklaborð"
-
-#: ../../keyboard.pm_.c:141
-#, fuzzy
-msgid "Armenian (old)"
-msgstr "Armenískt"
-
-#: ../../keyboard.pm_.c:142
-#, fuzzy
-msgid "Armenian (typewriter)"
-msgstr "Armenískt (hljóðfræðilegt)"
-
-#: ../../keyboard.pm_.c:143
-msgid "Armenian (phonetic)"
-msgstr "Armenískt (hljóðfræðilegt)"
-
-#: ../../keyboard.pm_.c:147
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:148
-msgid "Azerbaidjani (cyrillic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:149
-msgid "Belgian"
-msgstr "Belgískt"
-
-#: ../../keyboard.pm_.c:150
-msgid "Bulgarian"
-msgstr "Búlgarskt"
-
-#: ../../keyboard.pm_.c:151
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilískt"
-
-#: ../../keyboard.pm_.c:152
-#, fuzzy
-msgid "Belarusian"
-msgstr "Búlgarskt"
-
-#: ../../keyboard.pm_.c:153
-msgid "Swiss (German layout)"
-msgstr "Svissneskt (þýsk uppsetn.)"
-
-#: ../../keyboard.pm_.c:154
-msgid "Swiss (French layout)"
-msgstr "Svissneskt (frönsk uppsetn.)"
-
-#: ../../keyboard.pm_.c:156
-msgid "Czech (QWERTY)"
-msgstr "Tékkneskt (QWERTY)"
-
-#: ../../keyboard.pm_.c:157
-msgid "Czech (Programmers)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:159
-msgid "German (no dead keys)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:160
-msgid "Danish"
-msgstr "Danskt"
-
-#: ../../keyboard.pm_.c:161
-#, fuzzy
-msgid "Dvorak (US)"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:162
-#, fuzzy
-msgid "Dvorak (Norwegian)"
-msgstr "Norkst"
-
-#: ../../keyboard.pm_.c:163
-msgid "Estonian"
-msgstr "Eistlenskt"
-
-#: ../../keyboard.pm_.c:167
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgískt (\"Rússneskt\")"
-
-#: ../../keyboard.pm_.c:168
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgískt (\"Latínu\")"
-
-#: ../../keyboard.pm_.c:169
-msgid "Greek"
-msgstr "Grískt"
-
-#: ../../keyboard.pm_.c:170
-msgid "Hungarian"
-msgstr "Ungverskt"
-
-#: ../../keyboard.pm_.c:171
-msgid "Croatian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:172
-msgid "Israeli"
-msgstr "Ísraelískt"
-
-#: ../../keyboard.pm_.c:173
-msgid "Israeli (Phonetic)"
-msgstr "Ísraelískt (hljóðfr.)"
-
-#: ../../keyboard.pm_.c:174
-#, fuzzy
-msgid "Iranian"
-msgstr "Úkraínkst"
-
-#: ../../keyboard.pm_.c:175
-msgid "Icelandic"
-msgstr "Íslenskt"
-
-#: ../../keyboard.pm_.c:176
-msgid "Italian"
-msgstr "Ítalskt"
-
-#: ../../keyboard.pm_.c:177
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:178
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Breskt lyklaborð"
-
-#: ../../keyboard.pm_.c:179
-msgid "Latin American"
-msgstr "Suður amerískt"
-
-#: ../../keyboard.pm_.c:180
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:181
-msgid "Dutch"
-msgstr "Hollenskt"
-
-#: ../../keyboard.pm_.c:182
-#, fuzzy
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litháenískt AZERTY"
-
-#: ../../keyboard.pm_.c:184
-#, fuzzy
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litháenískt AZERTY"
-
-#: ../../keyboard.pm_.c:185
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litháenískt \"töluröð\" QWERTY"
-
-#: ../../keyboard.pm_.c:186
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litháenískt \"hljóðfræðilegt\" QWERTY"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Polish (qwerty layout)"
-msgstr "Svissneskt (þýsk uppsetn.)"
-
-#: ../../keyboard.pm_.c:189
-#, fuzzy
-msgid "Polish (qwertz layout)"
-msgstr "Svissneskt (þýsk uppsetn.)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Portuguese"
-msgstr "Portúgískt"
-
-#: ../../keyboard.pm_.c:191
-msgid "Canadian (Quebec)"
-msgstr "Kanadískt (Quebec)"
-
-#: ../../keyboard.pm_.c:193
-msgid "Russian (Yawerty)"
-msgstr "Rússneskt (Yawerty)"
-
-#: ../../keyboard.pm_.c:194
-msgid "Swedish"
-msgstr "Sænskt"
-
-#: ../../keyboard.pm_.c:195
-msgid "Slovenian"
-msgstr "Slóvenskt"
-
-#: ../../keyboard.pm_.c:196
-msgid "Slovakian (QWERTZ)"
-msgstr "Slóvakískt (QWERTZ)"
-
-#: ../../keyboard.pm_.c:197
-msgid "Slovakian (QWERTY)"
-msgstr "Slóvakískt (QWERTY)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Slovakian (Programmers)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:199
-msgid "Thai keyboard"
-msgstr "Thælenskt lyklaborð"
-
-#: ../../keyboard.pm_.c:200
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Tyrkneskt (hefðbundið \"F\" módel)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Tyrkneskt (nútíma \"Q\" módel)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Ukrainian"
-msgstr "Úkraínkst"
-
-#: ../../keyboard.pm_.c:205
-msgid "US keyboard (international)"
-msgstr "Bandarískt (alþjóðlegt)"
-
-#: ../../keyboard.pm_.c:206
-#, fuzzy
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Litháenískt \"töluröð\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-#, fuzzy
-msgid "Yugoslavian (latin/cyrillic)"
-msgstr "Júgoslavneskt (Latínu upps.)"
-
-#: ../../lvm.pm_.c:70
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-#, fuzzy
-msgid "Sun - Mouse"
-msgstr "USB mús"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-#, fuzzy
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Almenn mús"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr ""
-
-#: ../../mouse.pm_.c:45
-#, fuzzy
-msgid "Wheel"
-msgstr "stig"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "raðtengd"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Almenn þriggja hnappa mús"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mús (raðtengd, gömul C7 tegund)"
-
-#: ../../mouse.pm_.c:65
-#, fuzzy
-msgid "busmouse"
-msgstr "Engin mús"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:72
-#, fuzzy
-msgid "none"
-msgstr "Búið"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Engin mús"
-
-#: ../../my_gtk.pm_.c:356
-#, fuzzy
-msgid "Finish"
-msgstr "Finnskt"
-
-#: ../../my_gtk.pm_.c:356
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:357
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:617
-msgid "Is this correct?"
-msgstr "Er þetta rétt?"
-
-#: ../../netconnect.pm_.c:143
-#, fuzzy
-msgid "Internet configuration"
-msgstr "Sel stillingar"
-
-#: ../../netconnect.pm_.c:144
-#, fuzzy
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Viltu prófa skilgreininguna"
-
-#: ../../netconnect.pm_.c:148
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "Stilla nettengingu"
-
-#: ../../netconnect.pm_.c:154 ../../standalone/draknet_.c:196
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "Hvaða disk viltu færa til?"
-
-#: ../../netconnect.pm_.c:155
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../netconnect.pm_.c:156 ../../standalone/draknet_.c:196
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr "Nafn tengingar"
-
-#: ../../netconnect.pm_.c:161 ../../netconnect.pm_.c:904
-#: ../../netconnect.pm_.c:934 ../../netconnect.pm_.c:1012
-msgid "Network Configuration"
-msgstr "Netstillingar"
-
-#: ../../netconnect.pm_.c:222 ../../netconnect.pm_.c:266
-#: ../../netconnect.pm_.c:276 ../../netconnect.pm_.c:283
-#: ../../netconnect.pm_.c:293
-#, fuzzy
-msgid "ISDN Configuration"
-msgstr "Uppsetning"
-
-#: ../../netconnect.pm_.c:222
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../netconnect.pm_.c:236
-#, fuzzy
-msgid "Connection Configuration"
-msgstr "Sel stillingar"
-
-#: ../../netconnect.pm_.c:237
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../netconnect.pm_.c:239 ../../standalone/draknet_.c:552
-msgid "Card IRQ"
-msgstr ""
-
-#: ../../netconnect.pm_.c:240 ../../standalone/draknet_.c:553
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:241 ../../standalone/draknet_.c:554
-msgid "Card IO"
-msgstr ""
-
-#: ../../netconnect.pm_.c:242 ../../standalone/draknet_.c:555
-msgid "Card IO_0"
-msgstr ""
-
-#: ../../netconnect.pm_.c:243 ../../standalone/draknet_.c:556
-msgid "Card IO_1"
-msgstr ""
-
-#: ../../netconnect.pm_.c:244 ../../standalone/draknet_.c:557
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../netconnect.pm_.c:245 ../../standalone/draknet_.c:558
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:246 ../../standalone/draknet_.c:559
-#, fuzzy
-msgid "Provider phone number"
-msgstr "Símanúmer"
-
-#: ../../netconnect.pm_.c:247
-msgid "Provider dns 1"
-msgstr ""
-
-#: ../../netconnect.pm_.c:248
-msgid "Provider dns 2"
-msgstr ""
-
-#: ../../netconnect.pm_.c:249 ../../standalone/draknet_.c:564
-#, fuzzy
-msgid "Dialing mode"
-msgstr "Hringja inn með mótaldi"
-
-#: ../../netconnect.pm_.c:250 ../../standalone/draknet_.c:562
-#, fuzzy
-msgid "Account Login (user name)"
-msgstr "Tengipunktur"
-
-#: ../../netconnect.pm_.c:251 ../../standalone/draknet_.c:563
-#, fuzzy
-msgid "Account Password"
-msgstr "Lykilorð"
-
-#: ../../netconnect.pm_.c:261
-msgid "Europe"
-msgstr ""
-
-#: ../../netconnect.pm_.c:261
-msgid "Europe (EDSS1)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:263
-#, fuzzy
-msgid "Rest of the world"
-msgstr "Prófunar skilgreining"
-
-#: ../../netconnect.pm_.c:263
-msgid ""
-"Rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:267
-#, fuzzy
-msgid "Which protocol do you want to use ?"
-msgstr "Hvaða sneiðtegund viltu?"
-
-#: ../../netconnect.pm_.c:277
-#, fuzzy
-msgid "What kind of card do you have?"
-msgstr "Hvernig prentara ertu með?"
-
-#: ../../netconnect.pm_.c:278
-msgid "I don't know"
-msgstr ""
-
-#: ../../netconnect.pm_.c:278
-#, fuzzy
-msgid "ISA / PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../netconnect.pm_.c:278
-#, fuzzy
-msgid "PCI"
-msgstr "PCMCIA"
-
-#: ../../netconnect.pm_.c:284
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:288
-msgid "Abort"
-msgstr ""
-
-#: ../../netconnect.pm_.c:288
-#, fuzzy
-msgid "Continue"
-msgstr "Halda samt áfram?"
-
-#: ../../netconnect.pm_.c:294
-#, fuzzy
-msgid "Which is your ISDN card ?"
-msgstr "Á hvaða tímasvæði ertu?"
-
-#: ../../netconnect.pm_.c:314
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../netconnect.pm_.c:323
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../netconnect.pm_.c:371
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../netconnect.pm_.c:375 ../../standalone/drakgw_.c:232
-#, fuzzy
-msgid "Choose the network interface"
-msgstr "Veldu nýja stærð"
-
-#: ../../netconnect.pm_.c:376
-#, fuzzy
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Við hvaða raðtengi er músin þín tengd?"
-
-#: ../../netconnect.pm_.c:385 ../../netconnect.pm_.c:700
-#: ../../netconnect.pm_.c:845 ../../standalone/drakgw_.c:223
-msgid "Network interface"
-msgstr ""
-
-#: ../../netconnect.pm_.c:386
-msgid ""
-"\n"
-"Do you agree?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:386
-#, fuzzy
-msgid "I'm about to restart the network device:\n"
-msgstr "Viltu prófa skilgreininguna"
-
-#: ../../netconnect.pm_.c:484
-#, fuzzy
-msgid "ADSL configuration"
-msgstr "Uppsetning"
-
-#: ../../netconnect.pm_.c:485
-#, fuzzy
-msgid "Do you want to start your connection at boot?"
-msgstr "Viltu nota aboot?"
-
-#: ../../netconnect.pm_.c:620
-#, fuzzy
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Hvaða raðtengi er mótaldið tengt við?"
-
-#: ../../netconnect.pm_.c:625
-msgid "Dialup options"
-msgstr "Innhringistillingar"
-
-#: ../../netconnect.pm_.c:626 ../../standalone/draknet_.c:566
-msgid "Connection name"
-msgstr "Nafn tengingar"
-
-#: ../../netconnect.pm_.c:627 ../../standalone/draknet_.c:567
-#, fuzzy
-msgid "Phone number"
-msgstr "Símanúmer"
-
-#: ../../netconnect.pm_.c:628 ../../standalone/draknet_.c:568
-msgid "Login ID"
-msgstr "Notendanafn"
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Authentication"
-msgstr "Auðkenning"
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Script-based"
-msgstr "Með skriftu"
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Terminal-based"
-msgstr "Með skjáhermi"
-
-#: ../../netconnect.pm_.c:631 ../../standalone/draknet_.c:571
-msgid "Domain name"
-msgstr "Nafn léns"
-
-#: ../../netconnect.pm_.c:632 ../../standalone/draknet_.c:572
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Aðal nafnamiðlari"
-
-#: ../../netconnect.pm_.c:633 ../../standalone/draknet_.c:573
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Vara nafnamiðlari"
-
-#: ../../netconnect.pm_.c:701
-msgid ""
-"I'm about to restart the network device $netc->{NET_DEVICE}. Do you agree?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:745
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../netconnect.pm_.c:745 ../../netconnect.pm_.c:748
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Stilla nettengingu"
-
-#: ../../netconnect.pm_.c:745
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Hvaða disk viltu færa til?"
-
-#: ../../netconnect.pm_.c:748
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr "Nafn tengingar"
-
-#: ../../netconnect.pm_.c:748
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "Hvaða disk viltu færa til?"
-
-#: ../../netconnect.pm_.c:752 ../../standalone/net_monitor_.c:81
-#, fuzzy
-msgid "Connect to Internet"
-msgstr "Nafn tengingar"
-
-#: ../../netconnect.pm_.c:754
-#, fuzzy
-msgid "Disconnect from Internet"
-msgstr "Nafn tengingar"
-
-#: ../../netconnect.pm_.c:756
-#, fuzzy
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Stilla nettengingu"
-
-#: ../../netconnect.pm_.c:759
-#, fuzzy
-msgid "Internet connection & configuration"
-msgstr "Veldu prenttengingu"
-
-#: ../../netconnect.pm_.c:811 ../../netconnect.pm_.c:961
-#: ../../netconnect.pm_.c:971 ../../netconnect.pm_.c:986
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "Netstillingar"
-
-#: ../../netconnect.pm_.c:812
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "F. snillinga"
-
-#: ../../netconnect.pm_.c:812
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../netconnect.pm_.c:812
-#, fuzzy
-msgid "What kind is your ISDN connection?"
-msgstr "Við hvaða raðtengi er músin þín tengd?"
-
-#: ../../netconnect.pm_.c:833 ../../netconnect.pm_.c:882
-#, fuzzy
-msgid "Connect to the Internet"
-msgstr "Nafn tengingar"
-
-#: ../../netconnect.pm_.c:834
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../netconnect.pm_.c:836
-msgid "use dhcp"
-msgstr ""
-
-#: ../../netconnect.pm_.c:836
-msgid "use pppoe"
-msgstr ""
-
-#: ../../netconnect.pm_.c:836
-msgid "use pptp"
-msgstr ""
-
-#: ../../netconnect.pm_.c:846
-#, fuzzy, c-format
-msgid "I'm about to restart the network device %s. Do you agree?"
-msgstr "Viltu prófa skilgreininguna"
-
-#: ../../netconnect.pm_.c:883
-#, fuzzy
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "Hvaða sneiðtegund viltu?"
-
-#: ../../netconnect.pm_.c:900
-#, fuzzy
-msgid "Network configuration"
-msgstr "Netstillingar"
-
-#: ../../netconnect.pm_.c:901
-#, fuzzy
-msgid "Do you want to restart the network"
-msgstr "Viltu prófa skilgreininguna"
-
-#: ../../netconnect.pm_.c:904
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Viltu prófa skilgreininguna"
-
-#: ../../netconnect.pm_.c:935
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:962
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:964
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Veldu nýja stærð"
-
-#: ../../netconnect.pm_.c:965
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../netconnect.pm_.c:971 ../../printerdrake.pm_.c:19
-msgid "Detecting devices..."
-msgstr "Leita að tækjum..."
-
-#: ../../netconnect.pm_.c:978
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "Stilla nettengingu"
-
-#: ../../netconnect.pm_.c:978
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "%s tengipunktur er nú þegar til"
-
-#: ../../netconnect.pm_.c:979
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../netconnect.pm_.c:979
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../netconnect.pm_.c:980
-#, fuzzy
-msgid "DSL (or ADSL) connection"
-msgstr "Stilla nettengingu"
-
-#: ../../netconnect.pm_.c:980
-#, c-format
-msgid "detected on interface %s"
-msgstr ""
-
-#: ../../netconnect.pm_.c:981
-#, fuzzy
-msgid "Cable connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../netconnect.pm_.c:982
-#, fuzzy
-msgid "LAN connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../netconnect.pm_.c:982
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../netconnect.pm_.c:987
-#, fuzzy
-msgid "How do you want to connect to the Internet?"
-msgstr "Hvaða disk viltu færa til?"
-
-#: ../../netconnect.pm_.c:1004
-msgid ""
-"Congratulation, The network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system."
-msgstr ""
-
-#: ../../netconnect.pm_.c:1007
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-
-#: ../../network.pm_.c:253
-msgid "no network card found"
-msgstr "ekkert netkort fannst"
-
-#: ../../network.pm_.c:277 ../../network.pm_.c:387
-msgid "Configuring network"
-msgstr "Stilli staðarnetstenginu"
-
-#: ../../network.pm_.c:278
-#, fuzzy
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Sláðu inn heiti vélarinnar.  Vélarheitið þarf að vera fullt \n"
-"heiti, t.d. odinn.grimsey.is  Þú mátt líka slá inn IP \n"
-"vistfang gáttarinnar ef þú veist hvað það vistfang er.\n"
-"Gáttin gefur þér aðgang út úr staðarnetinu (t.d. á Internetið)."
-
-#: ../../network.pm_.c:282 ../../network.pm_.c:392
-#, fuzzy
-msgid "Host name"
-msgstr "Vélarheiti:"
-
-#: ../../network.pm_.c:319
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network.pm_.c:324
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Sláðu inn IP uppsetningu þessarar vélar. Hver færsla\n"
-"á að vera IP tala rituð með punkt á milli.\n"
-"(dæmi 192.168.1.13)"
-
-#: ../../network.pm_.c:333 ../../network.pm_.c:334
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Stilli nettæki %s"
-
-#: ../../network.pm_.c:334
-msgid " (driver $module)"
-msgstr ""
-
-#: ../../network.pm_.c:336 ../../standalone/draknet_.c:231
-#: ../../standalone/draknet_.c:427
-#, fuzzy
-msgid "IP address"
-msgstr "IP vistfang:"
-
-#: ../../network.pm_.c:337 ../../standalone/draknet_.c:428
-#, fuzzy
-msgid "Netmask"
-msgstr "Netsía:"
-
-#: ../../network.pm_.c:338
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network.pm_.c:338
-msgid "Automatic IP"
-msgstr "Sjálfvirkt IP"
-
-#: ../../network.pm_.c:359 ../../printerdrake.pm_.c:102
-#: ../../printerdrake.pm_.c:425
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP vistfang á að vera á sniðinu 192.168.1.10"
-
-#: ../../network.pm_.c:388
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Sláðu inn heiti vélarinnar.  Vélarheitið þarf að vera fullt \n"
-"heiti, t.d. odinn.grimsey.is  Þú mátt líka slá inn IP \n"
-"vistfang gáttarinnar ef þú veist hvað það vistfang er.\n"
-"Gáttin gefur þér aðgang út úr staðarnetinu (t.d. á Internetið)."
-
-#: ../../network.pm_.c:393
-msgid "DNS server"
-msgstr "Nafnamiðlari"
-
-#: ../../network.pm_.c:394 ../../standalone/draknet_.c:565
-msgid "Gateway"
-msgstr "Gátt"
-
-#: ../../network.pm_.c:396
-msgid "Gateway device"
-msgstr "Gátt (tækið)"
-
-#: ../../network.pm_.c:407
-#, fuzzy
-msgid "Proxies configuration"
-msgstr "Lokauppsetning"
-
-#: ../../network.pm_.c:408
-msgid "HTTP proxy"
-msgstr "HTTP sel:"
-
-#: ../../network.pm_.c:409
-msgid "FTP proxy"
-msgstr "FTP Sel:"
-
-#: ../../network.pm_.c:412
-msgid "Proxy should be http://..."
-msgstr "Sel á að vera http://..."
-
-#: ../../network.pm_.c:413
-msgid "Proxy should be ftp://..."
-msgstr "Sel á að vera ftp://..."
-
-#: ../../partition_table.pm_.c:563
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:581
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Það er gat í sneiðatöflunni þinni sem ekki er hægt að nota.\n"
-"Eina lausnins er að færa aðalsneiðar svo að gatið verði við hliðina á "
-"viðbótasneið"
-
-#: ../../partition_table.pm_.c:675
-#, c-format
-msgid "Error reading file %s"
-msgstr "villa við lestur úr skránni %s"
-
-#: ../../partition_table.pm_.c:682
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Villa við lestur úr skránni %s: %s"
-
-#: ../../partition_table.pm_.c:684
-msgid "Bad backup file"
-msgstr "Skemmd afritsskrá"
-
-#: ../../partition_table.pm_.c:706
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Villa við að skrifa í skrána %s"
-
-#: ../../partition_table_raw.pm_.c:161
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr ""
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr ""
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:27
-#, fuzzy
-msgid "nice"
-msgstr "tæki"
-
-#: ../../pkgs.pm_.c:28
-#, fuzzy
-msgid "maybe"
-msgstr "Ræsikjarna"
-
-#: ../../printer.pm_.c:20
-msgid "Local printer"
-msgstr "Staðbundinn prentari"
-
-#: ../../printer.pm_.c:21
-#, fuzzy
-msgid "Remote printer"
-msgstr "Viðföng fyrir fjartengda lpd prentara"
-
-#: ../../printer.pm_.c:23
-#, fuzzy
-msgid "Remote lpd server"
-msgstr "Fjartengdur"
-
-#: ../../printer.pm_.c:24
-#, fuzzy
-msgid "Network printer (socket)"
-msgstr "Viðföng NetWare prentara"
-
-#: ../../printer.pm_.c:25
-msgid "SMB/Windows 95/98/NT"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:26
-msgid "NetWare"
-msgstr "NetWare"
-
-#: ../../printer.pm_.c:27 ../../printerdrake.pm_.c:158
-#: ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Printer Device URI"
-msgstr "Prenttæki:"
-
-#: ../../printerdrake.pm_.c:19
-msgid "Test ports"
-msgstr "Prófa tengi"
-
-#: ../../printerdrake.pm_.c:40
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Prentari af gerðinni \"%s\" fannst á "
-
-#: ../../printerdrake.pm_.c:52
-msgid "Local Printer Device"
-msgstr "Staðbundið prenttæki"
-
-#: ../../printerdrake.pm_.c:53
-#, fuzzy
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Við hvaða tæki er prentarinn þinn tengdur\n"
-" (Athugaðu að /dev/lp0 er það sama og LPT1:)?\n"
-
-#: ../../printerdrake.pm_.c:55
-#, fuzzy
-msgid "Printer Device"
-msgstr "Prenttæki:"
-
-#: ../../printerdrake.pm_.c:74
-msgid "Remote lpd Printer Options"
-msgstr "Viðföng fyrir fjartengda lpd prentara"
-
-#: ../../printerdrake.pm_.c:75
-msgid ""
-"To use a remote lpd print queue, you need to supply\n"
-"the hostname of the printer server and the queue name\n"
-"on that server which jobs should be placed in."
-msgstr ""
-"Til þess að nota fjartengda lpd prentröð þarftu að gefa\n"
-"upp vélarheiti prentþjónsins og prentröðina á þeim sem\n"
-"þú vilt senda prentverkin í."
-
-#: ../../printerdrake.pm_.c:78
-#, fuzzy
-msgid "Remote hostname"
-msgstr "Prentþjónn:"
-
-#: ../../printerdrake.pm_.c:79
-msgid "Remote queue"
-msgstr "Fjartengd prentröð"
-
-#: ../../printerdrake.pm_.c:88
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB/Windows 9x/NT prentviðföng"
-
-#: ../../printerdrake.pm_.c:89
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Til þess að geta prentað á SMB prentara þarftu að gefa\n"
-"upp SMB vélarheiti þjónsins (sem er ekki endilega það\n"
-"sama og TCP/IP vélarheitið en oftast) og jafnvel IP vistfang prentþjónsins\n"
-"ásamt samnýtingarheiti prentarans, notandaheiti, lykilorði og\n"
-"vinnuhópsupplýsingum fyrir prentarann."
-
-#: ../../printerdrake.pm_.c:94
-msgid "SMB server host"
-msgstr "Heiti SMB þjóns"
-
-#: ../../printerdrake.pm_.c:95
-msgid "SMB server IP"
-msgstr "Vistfang SMB þjóns"
-
-#: ../../printerdrake.pm_.c:96
-msgid "Share name"
-msgstr "Samnýtingarheiti"
-
-#: ../../printerdrake.pm_.c:99
-msgid "Workgroup"
-msgstr "Vinnuhópur"
-
-#: ../../printerdrake.pm_.c:124
-msgid "NetWare Printer Options"
-msgstr "Viðföng NetWare prentara"
-
-#: ../../printerdrake.pm_.c:125
-msgid ""
-"To print to a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Til þess að geta prentað á NetWare prentara þarftu að gefa upp NetWare\n"
-"vélarheiti þjónsins (sem er ekki endilega það sama og TCP/IP vélarheitið)\n"
-"ásamt heiti prentaraðar, notandaheiti og lykilorði fyrir\n"
-"prentarann."
-
-#: ../../printerdrake.pm_.c:129
-msgid "Printer Server"
-msgstr "Prentþjónn"
-
-#: ../../printerdrake.pm_.c:130
-msgid "Print Queue Name"
-msgstr "Heiti prentraðar"
-
-#: ../../printerdrake.pm_.c:142
-#, fuzzy
-msgid "Socket Printer Options"
-msgstr "Viðföng staðbundinna prentara"
-
-#: ../../printerdrake.pm_.c:143
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"hostname of the printer and optionally the port number."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:145
-#, fuzzy
-msgid "Printer Hostname"
-msgstr "Stillingar á prentara"
-
-#: ../../printerdrake.pm_.c:146 ../../printerdrake.pm_.c:422
-#, fuzzy
-msgid "Port"
-msgstr "Lélegt"
-
-#: ../../printerdrake.pm_.c:159
-msgid "You can specify directly the URI to access the printer with CUPS."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:192 ../../printerdrake.pm_.c:244
-msgid "What type of printer do you have?"
-msgstr "Hvernig prentara ertu með?"
-
-#: ../../printerdrake.pm_.c:204 ../../printerdrake.pm_.c:305
-msgid "Do you want to test printing?"
-msgstr "Viltu prenta út prufublaðsíðu?"
-
-#: ../../printerdrake.pm_.c:207 ../../printerdrake.pm_.c:316
-msgid "Printing test page(s)..."
-msgstr "Prenta út prufublaðsíðu(r)..."
-
-#: ../../printerdrake.pm_.c:214 ../../printerdrake.pm_.c:324
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer daemon.\n"
-"This may take a little time before printer start.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-"Does it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:218 ../../printerdrake.pm_.c:328
-msgid ""
-"Test page(s) have been sent to the printer daemon.\n"
-"This may take a little time before printer start.\n"
-"Does it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:234
-msgid "Yes, print ASCII test page"
-msgstr "Já, prenta ASCII prufusíðu"
-
-#: ../../printerdrake.pm_.c:235
-msgid "Yes, print PostScript test page"
-msgstr "Já, prenta PostScript prufusíðu"
-
-#: ../../printerdrake.pm_.c:236
-msgid "Yes, print both test pages"
-msgstr "Já, prenta báðar prufusíður"
-
-#: ../../printerdrake.pm_.c:243
-msgid "Configure Printer"
-msgstr "Stilla prentara"
-
-#: ../../printerdrake.pm_.c:273
-msgid "Printer options"
-msgstr "Stillingar á prentara"
-
-#: ../../printerdrake.pm_.c:274
-msgid "Paper Size"
-msgstr "Pappírsstærð"
-
-#: ../../printerdrake.pm_.c:275
-msgid "Eject page after job?"
-msgstr "Koma blaðsíðu út eftirá?"
-
-#: ../../printerdrake.pm_.c:280
-msgid "Uniprint driver options"
-msgstr "Uniprint rekilvalkostir"
-
-#: ../../printerdrake.pm_.c:281
-msgid "Color depth options"
-msgstr "Stillingar á litadýpt"
-
-#: ../../printerdrake.pm_.c:283
-msgid "Print text as PostScript?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:285
-msgid "Fix stair-stepping text?"
-msgstr "Afstalla texta (tröppurnar)?"
-
-#: ../../printerdrake.pm_.c:287
-msgid "Number of pages per output pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:288
-msgid "Right/Left margins in points (1/72 of inch)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:289
-msgid "Top/Bottom margins in points (1/72 of inch)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:291
-msgid "Extra GhostScript options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:293
-#, fuzzy
-msgid "Extra Text options"
-msgstr "Stillingar á litadýpt"
-
-#: ../../printerdrake.pm_.c:295
-msgid "Reverse page order"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:345
-msgid "Would you like to configure a printer?"
-msgstr "Viltu setja upp prentara?"
-
-#: ../../printerdrake.pm_.c:351
-#, fuzzy
-msgid ""
-"Here are the following print queues.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hérna eru núverandi stillingar LILO .\n"
-"Þú getur bætt við fleirum eða breytt þessum."
-
-#: ../../printerdrake.pm_.c:370
-#, fuzzy
-msgid "CUPS starting"
-msgstr "Áætla"
-
-#: ../../printerdrake.pm_.c:370
-msgid "Reading CUPS drivers database..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:384 ../../printerdrake.pm_.c:450
-#: ../../printerdrake.pm_.c:471 ../../printerdrake.pm_.c:479
-msgid "Select Printer Connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../printerdrake.pm_.c:385 ../../printerdrake.pm_.c:472
-msgid "How is the printer connected?"
-msgstr "Hvernig er þessi prentari tengdur?"
-
-#: ../../printerdrake.pm_.c:392
-#, fuzzy
-msgid "Select Remote Printer Connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"With a remote CUPS server, you do not have to configure\n"
-"any printer here; printers will be automatically detected.\n"
-"In case of doubt, select \"Remote CUPS server\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-"With a remote CUPS server, you do not have to configure\n"
-"any printer here; printers will be automatically detected\n"
-"unless you have a server on a different network; in the\n"
-"latter case, you have to give the CUPS server IP address\n"
-"and optionally the port number."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "Vistfang SMB þjóns"
-
-#: ../../printerdrake.pm_.c:429
-msgid "Port number should be numeric"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:451 ../../printerdrake.pm_.c:480
-#, fuzzy
-msgid "Remove queue"
-msgstr "Fjartengd prentröð"
-
-#: ../../printerdrake.pm_.c:454
-msgid ""
-"Name of printer should contains only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:461
-#, fuzzy
-msgid ""
-"Every printer need a name (for example lp).\n"
-"Other parameters such as the description of the printer or its location\n"
-"can be defined. What name should be used for this printer and\n"
-"how is the printer connected?"
-msgstr ""
-"Allar prentraðir (sem taka við prentverkum) þurfa heiti\n"
-"(oft bara lp) og möppu. Hvaða heiti og möppu viltu nota fyrir\n"
-"þessa prentröð?"
-
-#: ../../printerdrake.pm_.c:465
-#, fuzzy
-msgid "Name of printer"
-msgstr "Staðbundinn prentari"
-
-#: ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Description"
-msgstr "Stilla handvirkt"
-
-#: ../../printerdrake.pm_.c:467
-#, fuzzy
-msgid "Location"
-msgstr "Upplýsingar"
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid ""
-"Every print queue (which print jobs are directed to) needs a\n"
-"name (often lp) and a spool directory associated with it. What\n"
-"name and directory should be used for this queue and how is the printer "
-"connected?"
-msgstr ""
-"Allar prentraðir (sem taka við prentverkum) þurfa heiti\n"
-"(oft bara lp) og möppu. Hvaða heiti og möppu viltu nota fyrir\n"
-"þessa prentröð?"
-
-#: ../../printerdrake.pm_.c:489
-#, fuzzy
-msgid "Name of queue"
-msgstr "Heiti prentraðar:"
-
-#: ../../printerdrake.pm_.c:490
-#, fuzzy
-msgid "Spool directory"
-msgstr "Mappa prentraðar:"
-
-#: ../../printerdrake.pm_.c:491
-#, fuzzy
-msgid "Printer Connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../raid.pm_.c:33
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-
-#: ../../raid.pm_.c:103
-msgid "Can't write file $file"
-msgstr ""
-
-#: ../../raid.pm_.c:128
-msgid "mkraid failed"
-msgstr ""
-
-#: ../../raid.pm_.c:128
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr ""
-
-#: ../../raid.pm_.c:144
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ekki nógu margar disksneiðar fyrir RAID %d\n"
-
-#: ../../services.pm_.c:16
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:17
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-
-#: ../../services.pm_.c:18
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: ../../services.pm_.c:20
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:22
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: ../../services.pm_.c:25
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: ../../services.pm_.c:28
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:30
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-
-#: ../../services.pm_.c:32
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: ../../services.pm_.c:36
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:44
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:46
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: ../../services.pm_.c:48
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:52
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:54
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:56
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:61
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:64
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:67
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:70
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-
-#: ../../services.pm_.c:72
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:74
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:79
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:83
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:85
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:86
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:88
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:89
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-
-#: ../../services.pm_.c:118
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Veldu þær þjónustur sem skal sjálfkrafa keyra við ræsingu"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "running"
-msgstr "Aðvörun"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "stopped"
-msgstr "Bæta aftan við"
-
-#: ../../services.pm_.c:151
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:156
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:163
-#, fuzzy
-msgid "On boot"
-msgstr "Rót"
-
-#: ../../standalone/diskdrake_.c:67
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ég get ekki lesið disksneiðatöflu þína, hún er of skemmd fyrir mig :-(\n"
-"Ég mun reyna að halda áfram með því að hreinsa skemmdar disksneiðar"
-
-#: ../../standalone/drakgw_.c:37 ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet Connection Sharing"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/drakgw_.c:118
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:119
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:123
-#, fuzzy
-msgid "disable"
-msgstr "Tafla"
-
-#: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148
-#, fuzzy
-msgid "reconfigure"
-msgstr "Stilla X"
-
-#: ../../standalone/drakgw_.c:126
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "Leita að tækjum..."
-
-#: ../../standalone/drakgw_.c:134
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/drakgw_.c:143
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:144
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:148
-#, fuzzy
-msgid "enable"
-msgstr "Tafla"
-
-#: ../../standalone/drakgw_.c:155
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:160
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/drakgw_.c:168
-msgid "Config file content could not be interpreted."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-msgid "Unrecognized config file"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:181
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:207
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:208
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Endursníð..."
-
-#: ../../standalone/drakgw_.c:216
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:217
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:224
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:233
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:242
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid "Potential LAN address conflict found in current config of $_!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:261 ../../standalone/drakgw_.c:267
-#, fuzzy
-msgid "Firewalling configuration detected!"
-msgstr "Les uppsetningarskrá"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:276
-#, fuzzy
-msgid "Configuring..."
-msgstr "Uppsetning"
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:307
-#, fuzzy
-msgid "Problems installing package $_"
-msgstr "Set inn pakka %s"
-
-#: ../../standalone/drakgw_.c:590
-msgid "Congratulations!"
-msgstr "Til hamingju!"
-
-#: ../../standalone/drakgw_.c:591
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:608
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:609
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:610
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/drakgw_.c:615
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/drakgw_.c:622
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/draknet_.c:59
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netstillingar"
-
-#: ../../standalone/draknet_.c:66 ../../standalone/draknet_.c:539
-#, fuzzy
-msgid "Profile: "
-msgstr "tókst ekki að tengja: "
-
-#: ../../standalone/draknet_.c:74
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:108
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:114
-msgid "Name of the profile to create:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:140
-#, fuzzy
-msgid "Hostname: "
-msgstr "Vélarheiti:"
-
-#: ../../standalone/draknet_.c:147
-#, fuzzy
-msgid "Internet access"
-msgstr "Endursníð..."
-
-#: ../../standalone/draknet_.c:160
-#, fuzzy
-msgid "Type:"
-msgstr "Tegund: "
-
-#: ../../standalone/draknet_.c:163 ../../standalone/draknet_.c:354
-msgid "Gateway:"
-msgstr "Gátt:"
-
-#: ../../standalone/draknet_.c:163 ../../standalone/draknet_.c:354
-#, fuzzy
-msgid "Interface:"
-msgstr "Endursníð..."
-
-#: ../../standalone/draknet_.c:168
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:170 ../../standalone/draknet_.c:357
-#: ../../standalone/net_monitor_.c:122 ../../standalone/net_monitor_.c:224
-#, fuzzy
-msgid "Connected"
-msgstr "Nafn tengingar"
-
-#: ../../standalone/draknet_.c:170 ../../standalone/draknet_.c:357
-#: ../../standalone/net_monitor_.c:83 ../../standalone/net_monitor_.c:122
-#: ../../standalone/net_monitor_.c:224
-#, fuzzy
-msgid "Not connected"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/draknet_.c:173 ../../standalone/draknet_.c:358
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:173 ../../standalone/draknet_.c:358
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:191
-#, fuzzy
-msgid "Starting your connection..."
-msgstr "Stilla nettengingu"
-
-#: ../../standalone/draknet_.c:199
-#, fuzzy
-msgid "Closing your connection..."
-msgstr "Stilla nettengingu"
-
-#: ../../standalone/draknet_.c:204
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-
-#: ../../standalone/draknet_.c:207
-#, fuzzy
-msgid "The system is now disconnected."
-msgstr "Hvaða disk viltu færa til?"
-
-#: ../../standalone/draknet_.c:219
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Setja upp prentara"
-
-#: ../../standalone/draknet_.c:226 ../../standalone/draknet_.c:411
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Uppsetning"
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "Adapter"
-msgstr "Uppfærsla"
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "Driver"
-msgstr "Sem þjón"
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "Interface"
-msgstr "Endursníð..."
-
-#: ../../standalone/draknet_.c:231
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:250
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Stilla nettengingu"
-
-#: ../../standalone/draknet_.c:283
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Venjulega"
-
-#: ../../standalone/draknet_.c:288
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:307
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Prófunar skilgreining"
-
-#: ../../standalone/draknet_.c:391
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:415
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "Uppsetning"
-
-#: ../../standalone/draknet_.c:423
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:429
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:430
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:466 ../../standalone/draknet_.c:470
-#, fuzzy
-msgid "Disable"
-msgstr "Tafla"
-
-#: ../../standalone/draknet_.c:466 ../../standalone/draknet_.c:470
-#, fuzzy
-msgid "Enable"
-msgstr "Tafla"
-
-#: ../../standalone/draknet_.c:504
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:528
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/draknet_.c:532
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/draknet_.c:541
-#, fuzzy
-msgid "Connection type: "
-msgstr "Nafn tengingar"
-
-#: ../../standalone/draknet_.c:547
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-#, fuzzy
-msgid "Provider dns 1 (optional)"
-msgstr "Stillingar á prentara"
-
-#: ../../standalone/draknet_.c:561
-#, fuzzy
-msgid "Provider dns 2 (optional)"
-msgstr "Stillingar á prentara"
-
-#: ../../standalone/draknet_.c:574
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:575
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Velkomin(n) í tölvuþrjótinn"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Lélegt"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Taugaveiklað"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Þetta er hið hefðbundna öryggi sem mælt er með fyrir tölvu sem verður notuð\n"
-"til að tengja við netið sem biðill. Öryggisathuganir eru núna í gangi. "
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Á þessu öryggisstigi er orðið mögulegt að nota tölvuna sem þjón.\n"
-"Öryggið er nógu nógu mikið til að taka við fyrirspurnum frá\n"
-"mörgum biðlum. "
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Kerfið er komið á 4. stig og er nú alveg lokað.\n"
-"Öryggið er á hæsta stigi."
-
-#: ../../standalone/draksec_.c:52
-msgid "Setting security level"
-msgstr "Stilli öryggisþrep"
-
-#: ../../standalone/drakxconf_.c:44
-#, fuzzy
-msgid "Control Center"
-msgstr "Nafn tengingar"
-
-#: ../../standalone/drakxconf_.c:45
-msgid "Choose the tool you want to use"
-msgstr "Veldu forritið sem þú vilt nota"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:23
-#, fuzzy
-msgid "Change Cd-Rom"
-msgstr "Breyta upplausn"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:50
-msgid "no serial_usb found\n"
-msgstr "ekkert serial_usb fannst\n"
-
-#: ../../standalone/mousedrake_.c:54
-msgid "Emulate third button?"
-msgstr "Herma eftir þriðja hnapp?"
-
-#: ../../standalone/mousedrake_.c:131
-#, fuzzy
-msgid "Test the mouse here."
-msgstr "Hvernig mús ertu með?"
-
-#: ../../standalone/net_monitor_.c:40 ../../standalone/net_monitor_.c:52
-#, fuzzy
-msgid "Network Monitoring"
-msgstr "Netstillingar"
-
-#: ../../standalone/net_monitor_.c:56
-msgid "Statistics"
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:59
-msgid "Sending Speed: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:61
-msgid "Receiving Speed: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:66
-#, fuzzy
-msgid "Close"
-msgstr "USB mús"
-
-#: ../../standalone/net_monitor_.c:100 ../../standalone/net_monitor_.c:104
-#, fuzzy
-msgid "Connecting to Internet "
-msgstr "Nafn tengingar"
-
-#: ../../standalone/net_monitor_.c:100 ../../standalone/net_monitor_.c:104
-#, fuzzy
-msgid "Disconnecting from Internet "
-msgstr "Nafn tengingar"
-
-#: ../../standalone/net_monitor_.c:114
-#, fuzzy
-msgid "Disconnection from Internet failed."
-msgstr "Nafn tengingar"
-
-#: ../../standalone/net_monitor_.c:115
-#, fuzzy
-msgid "Disconnection from Internet complete."
-msgstr "Nafn tengingar"
-
-#: ../../standalone/net_monitor_.c:117
-#, fuzzy
-msgid "Connection complete."
-msgstr "Nafn tengingar"
-
-#: ../../standalone/net_monitor_.c:118
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:188
-msgid "sent: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:191
-msgid "received: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:222
-#, fuzzy
-msgid "Connect"
-msgstr "Nafn tengingar"
-
-#: ../../standalone/net_monitor_.c:222
-#, fuzzy
-msgid "Disconnect"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/tinyfirewall_.c:29
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Les uppsetningarskrá"
-
-#: ../../standalone/tinyfirewall_.c:42
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Les uppsetningarskrá"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:10
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Linux Mandrake machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:15
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:22
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:27
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:32
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:37
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:42
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:47
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:52
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:57
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:62
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:67
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:83
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:85
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Villa við að opna %s til skriftar: %s"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Development"
-msgstr "Forritun"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "Upplýsingar"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Graphics"
-msgstr "Margmiðlun"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet"
-msgstr "Endursníð..."
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Viðföng NetWare prentara"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Sel stillingar"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office"
-msgstr "tæki"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Margmiðlun"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Leiðbeiningar"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Sound"
-msgstr "Margmiðlun"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Upplýsingar"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Video"
-msgstr "Margmiðlun"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Viðföng NetWare prentara"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "Upplýsingar"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - CD Burning"
-msgstr "Margmiðlun"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "netþjónn"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Uppsetning"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "KDE Workstation"
-msgstr "Upplýsingar"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "Upplýsingar"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Endursníð..."
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Leiðbeiningar"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Viltu prófa skilgreininguna"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#, fuzzy
-#~ msgid "%d seconds"
-#~ msgstr "Hætti eftir %d sekúndur"
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "Uppsetning"
-
-#, fuzzy
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "Uppsetning"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Veljið skrá"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Standard tools"
-#~ msgstr "Forritun"
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Uppsetning: Bæta slóð við"
-
-#, fuzzy
-#~ msgid "Boot style configuration"
-#~ msgstr "Lokauppsetning"
-
-#, fuzzy
-#~ msgid "Automatic dependencies"
-#~ msgstr "Athuga tengsli milli pakka"
-
-#, fuzzy
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Stilla X"
-
-#, fuzzy
-#~ msgid "Create a boot floppy"
-#~ msgstr "Búa til ræsidiskling"
-
-#, fuzzy
-#~ msgid "Format floppy"
-#~ msgstr "Forsníð"
-
-#, fuzzy
-#~ msgid "Choice"
-#~ msgstr "tæki"
-
-#, fuzzy
-#~ msgid "gMonitor"
-#~ msgstr "Skjár"
-
-# ## skrytid
-#, fuzzy
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "  - Use hard drive optimizations: This option can improve hard disk\n"
-#~ "accesses but is only for advanced users, it can ruin your hard drive if\n"
-#~ "used incorrectly. Use it only if you know how.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Choose security level: You can choose a security level for your\n"
-#~ "system.\n"
-#~ "    Please refer to the manual for more information.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM size if needed: In some cases, Linux is unable to\n"
-#~ "correctly detect all the installed RAM on some systems. If this is the\n"
-#~ "case, specify the correct quantity. Note: a difference of 2 or 4 Mb is\n"
-#~ "normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Removable media automounting: If you would prefer not to manually\n"
-#~ "mount removable drives (CD-ROM, Floppy, Zip) by typing \"mount\" and\n"
-#~ "\"umount\", select this option. \n"
-#~ "\n"
-#~ "\n"
-#~ "  - Enable Num Lock at startup: If you want Number Lock enabled after\n"
-#~ "booting, select this option (Note: Num Lock will still not work under\n"
-#~ "X)."
-
-#, fuzzy
-#~ msgid "Internet/Network access"
-#~ msgstr "Endursníð..."
-
-#, fuzzy
-#~ msgid "Mail information"
-#~ msgstr "Sýna upplýsingar"
-
-#, fuzzy
-#~ msgid "Firewall Configuration Wizard"
-#~ msgstr "Netstillingar"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Ýmislegt"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Ýmsar spurningar:"
-
-#, fuzzy
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Stilli öryggisþrep"
-
-#, fuzzy
-#~ msgid "Actions"
-#~ msgstr "Upplýsingar"
-
-#, fuzzy
-#~ msgid "toot"
-#~ msgstr "Rót"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Aðal nafnamiðlari"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Vara nafnamiðlari"
-
-#, fuzzy
-#~ msgid "using module"
-#~ msgstr "Hringja inn með mótaldi"
-
-#, fuzzy
-#~ msgid "Development, Database"
-#~ msgstr "Forritun"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "Búið"
-
-#, fuzzy
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Hverju viltu bæta við?"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Reyna að finna mótald?"
-
-#, fuzzy
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Configure a cable connection"
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Configure local network"
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Disable networking"
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr "LAN netuppsetning er þegar til staðar. Hvað viltu gera?"
-
-#, fuzzy
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Uppsetning"
-
-#~ msgid "Multimedia"
-#~ msgstr "Margmiðlun"
-
-#, fuzzy
-#~ msgid "Gnome"
-#~ msgstr "Búið"
-
-#, fuzzy
-#~ msgid "Internet Tools"
-#~ msgstr "Sel stillingar"
-
-#, fuzzy
-#~ msgid "Development C/C++"
-#~ msgstr "Forritun"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Tilgreina tímasvæði"
-
-#~ msgid "Configure printer"
-#~ msgstr "Setja upp prentara"
-
-#, fuzzy
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Viðföng NetWare prentara"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(getur skaðað vistuð gögn)"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "Nota fínstillingar á hörðum disk(um)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Kveikja á NUMLOCK við eftir ræsingu"
-
-#, fuzzy
-#~ msgid "Confirm Password"
-#~ msgstr "Lykilorð"
-
-#~ msgid "DNS server:"
-#~ msgstr "Nafnamiðlari:"
-
-#~ msgid "Gateway device:"
-#~ msgstr "Gátt (tækið):"
-
-#, fuzzy
-#~ msgid "default"
-#~ msgstr "Sjálfgefið"
-
-#, fuzzy
-#~ msgid "What is your system used for?"
-#~ msgstr "Á hvaða tímasvæði ertu?"
-
-#, fuzzy
-#~ msgid "Select the size you want to install"
-#~ msgstr "Veldu þá stærð sem þú vilt setja inn"
-
-#~ msgid "Customized"
-#~ msgstr "Sérlagaða"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Nota skuggaskrá"
-
-#~ msgid "shadow"
-#~ msgstr "skuggi"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Nota MD5 lykilorð"
-
-#~ msgid "Search"
-#~ msgstr "Leita"
-
-#~ msgid "Package"
-#~ msgstr "Pakka"
-
-#~ msgid "Text"
-#~ msgstr "Texta"
-
-#~ msgid "Tree"
-#~ msgstr "Tré"
-
-#~ msgid "Sort by"
-#~ msgstr "Raða eftir"
-
-#~ msgid "Category"
-#~ msgstr "Flokk"
-
-#~ msgid "See"
-#~ msgstr "Skoða"
-
-#~ msgid "Installed packages"
-#~ msgstr "Pakkar sem eru inni"
-
-#~ msgid "Available packages"
-#~ msgstr "Tiltækir pakkar"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Sýna aðeins laufblöð"
-
-#~ msgid "Expand all"
-#~ msgstr "Opna allt"
-
-#~ msgid "Collapse all"
-#~ msgstr "Loka öllu"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Bæta slóð pakkanna við"
-
-#~ msgid "Update location"
-#~ msgstr "Uppfærsluslóð"
-
-#~ msgid "Remove"
-#~ msgstr "Fjarlægja"
-
-#~ msgid "Find Package"
-#~ msgstr "Finna pakka"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Finna pakka sem inniheldur skrá"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Skipta á milli innsettra og tiltækra"
-
-#~ msgid "Uninstall"
-#~ msgstr "Fjarlægja"
-
-#~ msgid "Choose package to install"
-#~ msgstr "Veldu pakka til að setja inn"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Athuga tengsli milli pakka"
-
-#~ msgid "Wait"
-#~ msgstr "Augnablik"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Eftirfarandi pakkar verða fjarlægðir"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "Fjarlægji RPM pakkana"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Hvaða pakka ertu að leita að?"
-
-#~ msgid "%s not found"
-#~ msgstr "%s fannst ekki"
-
-#~ msgid "No match"
-#~ msgstr "Ekkert fannst"
-
-#~ msgid "No more match"
-#~ msgstr "Fleira fannst ekki"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake er núna í ``lágminnis'' ham.\n"
-#~ "Það verður eyrt aftur til að leyfa skráarleit."
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Hvaða skrá ertu að leita að?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Hverju ertu að leita að?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Gefðu upp nafn (t.d. `extra', `commercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Mappa"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Ekkert geisladrif til staðar (ekkert í /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "Slóð í möppu sem inniheldur RPM pakka"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Fyrir FTP og HTTP, þá þarftu að gefa upp staðsetningu hdlist.\n"
-#~ "Staðsetningin verður að vera miðuð við slóðina hér að ofan."
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Vinsamlega tilgreindu eftirfarandi"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s er nú þegar í notkun."
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Uppfæri RPM gagnaskrána"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Fjarlægji nafnið %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Leita að \"laufblöðum\"."
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Þessi leit mun taka dálítinn tíma"
-
-#, fuzzy
-#~ msgid "France"
-#~ msgstr "Hætta við"
-
-#, fuzzy
-#~ msgid "ECI modem"
-#~ msgstr "F. snillinga"
-
-#, fuzzy
-#~ msgid "interesting"
-#~ msgstr "Endursníð..."
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Við hvaða raðtengi er músin þín tengd?"
-
-#~ msgid "Czech"
-#~ msgstr "Tékkneskt"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slóvakískt"
-
-#, fuzzy
-#~ msgid "Reconfigure local network"
-#~ msgstr "Endurstilla netstillingar núna"
-
-#, fuzzy
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Germany"
-#~ msgstr "Þýskt"
-
-#, fuzzy
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Þýskt"
-
-#, fuzzy
-#~ msgid "What do you wish to do?"
-#~ msgstr "Hvað viltu gera?"
-
-#, fuzzy
-#~ msgid "Install/Rescue"
-#~ msgstr "Innsetning"
-
-#, fuzzy
-#~ msgid "Rescue"
-#~ msgstr "Endurstækka"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Hvaða sneiðtegund viltu?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Linux-Mandrake "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Veldu \"Innsetning\" ef það eru engar fyrri útgáfur af Linux á tölvunni\n"
-#~ "eða ef þú vilt nota fleiri en eina dreifingu af Linux.\n"
-#~ "\n"
-#~ "Veldu \"Uppfærsla\" ef þú vilt uppfæra fyrri innsetningu af Linux "
-#~ "Mandrake:\n"
-#~ "%s eða %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Ráðlagt: Ef þú hefur aldrei sett Linux inn áður.\n"
-#~ "\n"
-#~ "  - Eftir óskum: Ef þú hefur þó nokkra reynslu meðiar with Linux, you "
-#~ "will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\".\n"
-
-#          ***********************************************
-#          ***   Hér fyrir neðan er þýðingin mín, en   ***
-#  ***********   ég fór líka aðeins yfir það sem var   ************
-#          ***   þýtt fyrir ofan.  :-)  - Þórarinn     ***
-#          *** (Ég klára þetta seinnipartinn á morgun) ***
-#          ***********************************************
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Linux-Mandrake system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Þessi hluti hefur að geyma uppsetningu á staðarnetstengingu\n"
-#~ "(LAN) eða mótaldstengingu.\n"
-#~ "\n"
-#~ "Ef þú velur \"Staðarnetstenging\" þá mun DrakX\n"
-#~ "reyna að finna Ethernet netkortið í vélinni.  Í flestum tilvikum\n"
-#~ "finnast PCI netkort og er þá kortið strax tilbúið fyrir netuppsetningu.\n"
-#~ "Ef netkortið þitt er hinsvegar ISA kort þá er sjálfvirk uppsetning á því\n"
-#~ "ekki möguleg og þú þarft því að velja rekil af listanum sem birtist.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef þú ert með SCSI kort þá getur þú látið leita að því fyrst en síðan\n"
-#~ "gefið upp viðföng ef það finnst ekki.  Viðföngin sem þú þarft að nota\n"
-#~ "ættir þú að finna í leiðbeiningunum sem komu með kortinu.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef þú ert að setja Linux Mandrake á tölvu sem er hluti af staðarneti\n"
-#~ "þá ættir þú að fá nauðsynlegar upplýsingar fyrir tengingu hjá "
-#~ "kerfisstjóra.\n"
-#~ "Upplýsingarnar sem þú þarft til að tengjast staðarneti með TCP/IP eru:\n"
-#~ "IP vistfang, undirnetssía (netsía) og tölvunafn. Ef þú ert að\n"
-#~ "setja upp einkanet þá getur þú sjálf(ur) ákveðið hvaða vistfang,\n"
-#~ "netsíu og nafn þú notar á tölvuna.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef þú velur \"Mótaldstenging\" þá verður mótaldstengingin gerð klár.\n"
-#~ "DrakX mun reyna að finna mótaldið þitt en ef sú leit ber ekki árangur\n"
-#~ "þá verður þú sjálf(ur) að velja raðtengið (COM port) sem mótaldið er\n"
-#~ "tengt við."
-
-#, fuzzy
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "Linux getur notað margar gerðir prentara.  Prentararnir krefjast\n"
-#~ "mismunandi uppsetninga.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef prentarinn þinn er tengdur beint við tölvuna veldu þá \n"
-#~ "\"Staðbundinn prentari\". Þú þarft síðan að tilgreina við\n"
-#~ "hvaða tengi prentarinn er tengdur og velja viðeigandi síu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef þú vilt hafa aðgang að prentara sem tengdur er við fjarlæga UNIX vél\n"
-#~ "(eða Windows NT með LPD) þá verður þú að velja \"Fjartengdur prentari\".\n"
-#~ "Þú þarft ekki að gefa upp notandanafn eða lykilorð en þarft að vita \n"
-#~ "nafnið á prentröðinni á þeim þjón.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef þú vilt hafa aðgang að SMB prentara (prentara sem er tengdur við\n"
-#~ "fjarlæga Windows 9x/NT vél), þá þarftu að gefa upp SMB nafn þjónsins\n"
-#~ "sem oftast er sama og TCP/IP nafn (en þarf ekki að vera).  Einnig þarftu\n"
-#~ "IP vistfang, notandanafn, lykilorð, nafn vinnuhóps og auðvitað sjálft\n"
-#~ "nafn prentarans.  Sama gildir um NetWare prentara, nema þú þarft\n"
-#~ "ekkert vinnuhópsnafn."
-
-#, fuzzy
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "Það er stranglega mælt með því að þú svarir \"Já\" hérna. Ef þú setur\n"
-#~ "Microsoft Windows inn síðar þá skrifar það yfir ræsihluta disksins og\n"
-#~ "gerir þér þar með ókleyft að ræsa Linux nema þú hafir verið búin(n)\n"
-#~ "að útbúa ræsidiskling."
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Eyða breytingum?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Hvernig mús ertu með?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Sjálfvirk upplausn"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Til að finna mögulegar upplausnir munu nokkrar verða prófaðar.\n"
-#~ "Skjárinn þinn mun blikka...\n"
-#~ "Þú getur slökkt á honum ef þú vilt, tölvan flautar þegar því er lokið"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Ég get reynt að finna mögulegar upplausnir (t.d: 800x600).\n"
-#~ "Stundum getur tölvan frosið við það.\n"
-#~ "Viltu prófa?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Engar leyfilegar upplausnir fundust\n"
-#~ "Prófaðu að velja annað skjákort eða skjá"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Sjálfvirk leit upplausna"
-
-#, fuzzy
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "ATI brautarmús"
-
-#, fuzzy
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "USB mús (3 eða fleiri takkar)"
-
-#, fuzzy
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "USB mús (3 eða fleiri takkar)"
-
-#, fuzzy
-#~ msgid "Apple USB Mouse"
-#~ msgstr "USB mús"
-
-#, fuzzy
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "USB mús (3 eða fleiri takkar)"
-
-#, fuzzy
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "USB mús (3 eða fleiri takkar)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI brautarmús"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft brautarmús"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech brautarmús"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB mús (3 eða fleiri takkar)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft útgáfa 2.1A eða nýrri (raðtengd)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (raðtengd)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (raðtengd)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (raðtengd)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Almenn mús (raðtengd)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft samhæfð (raðtengd)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Almenn þriggja hnappa mús (raðtengd)"
-
-#, fuzzy
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "tókst ekki að tengja nfs"
-
-#~ msgid "CHAP"
-#~ msgstr "CHAP"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Dulkóðun"
-
-#~ msgid "Show less"
-#~ msgstr "Sýna færri"
-
-#~ msgid "Show more"
-#~ msgstr "Sýna fleiri"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Hvaða lyklaborðsuppsetningu viltu?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Viltu leita að PCMCIA kortun?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Leita að %s kortum?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Leita að PCI kortum?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "Leita að rótardisksneið"
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: Þetta er ekki rótardisksneið.  Veldu aðra."
-
-#~ msgid "No root partition found"
-#~ msgstr "Engin rótarsneið fannst"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# When possible cp437 accentuated letters can be used too.
-#
-# '\240' is 'á' (aacute) in cp437 encoding
-# '\224' is 'ö' (odiaeresis) in cp437 encoding.
-# '\221' is 'æ' (ae) in cp437 encoding
-# '\241' is 'í' (iacute) in cp437 encoding
-# '\242' is 'ó' (oacute) in cp437 encoding
-# '\230' is 'ý' (yacute) in cp437 encoding
-# '\243' is 'ú' (oacute) in cp437 encoding
-# there is no 'þ' nor 'ð' in cp437; changed respectively to 'th' and 'd'
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Velkomin(n) ¡ LILO st˜rikerfisr‘sistj¢rann!\n"
-#~ "\n"
-#~ "Sl du   <TAB> til ad f  lista yfir m”gulega valkosti.\n"
-#~ "\n"
-#~ "Til r‘sa einn af theim, sl du inn nafnid og s¡dan   <ENTER>\n"
-#~ "eda b¡ddu ¡ %d sek£ndur thar til sj lfgefin r‘sing hefst.\n"
-#~ "\n"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Velkomin(n) i SILO styrikerfisraesistjorann!\n"
-#~ "\n"
-#~ "Sladu a <TAB> til ad fa lista yfir moegulega valkosti.\n"
-#~ "\n"
-#~ "Til raesa einn af theim, sl du inn nafnid og sidan a <ENTER>\n"
-#~ "eda biddu i %d sekundur thar til sjalfgefin raesing hefst.\n"
-#~ "\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "Stillingar SILO"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Hérna eru núverandi stillingar SILO .\n"
-#~ "Þú getur bætt við fleirum eða breytt þessum."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Þetta nafn er nú þegar í notkun."
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "Innsetning SILO brást sökum eftirfarandi villu:"
-
-#~ msgid "Shutting down"
-#~ msgstr "Slekk á tölvunni"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Veldu \"Innsetning\" ef það eru engar fyrri útgáfur af Linux á tölvunni\n"
-#~ "eða ef þú vilt nota fleiri en eina dreifingu af Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "Veldu \"Uppfærsla\" ef þú vilt uppfæra fyrri innsetningu af Linux "
-#~ "Mandrake:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios),\n"
-#~ "Gold 2000 eða 7.0 (Air)."
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "Viltu nota LILO?"
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (LInux LOader) getur ræst Linux og önnur stýrikerfi.\n"
-#~ "Venjulega finnast þau við innsetningu á Linux.  Ef þú sérð\n"
-#~ "ekki þitt kerfi þá getur þú bætt því við núna ásamt öðrum.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef þú vilt ekki að aðrir hafi aðgang að einhverju kerfanna þá getur\n"
-#~ "þú einfaldlega fjarlægt það núna (en þá þarf ræsidiskling til að ræsa "
-#~ "það)."
-
-#~ msgid ""
-#~ "Now that you've selected desired groups, please choose \n"
-#~ "how many packages you want, ranging from minimal to full \n"
-#~ "installation of each selected groups."
-#~ msgstr ""
-#~ "Nú þegar flokkar hafa verið valdir skaltu velja hve marga \n"
-#~ "þú vilt sitja inn.  Þú getur tilgreint litla eða fulla \n"
-#~ "innsetningu af pökkum úr þeim flokkum sem þú valdir."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Ráðlagt: Ef þú hefur aldrei sett Linux inn áður.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Eftir óskum: Ef þú hefur þó nokkra reynslu meðiar with Linux, you "
-#~ "will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "Sæki dulritunarpakkana"
-
-#~ msgid "Setup SCSI"
-#~ msgstr "Setja upp SCSI"
-
-#~ msgid "Which packages do you want to install"
-#~ msgstr "Hvaða pakka viltu setja inn"
-
-#~ msgid "Local LAN"
-#~ msgstr "Staðarnet(LAN)"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Stærð: %s MB"
-
-#~ msgid "formatting"
-#~ msgstr "forsníð"
-
-#~ msgid "changing type of"
-#~ msgstr "breyti tegund"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Eftir %s disksneiðar %s,"
-
-#~ msgid "linear"
-#~ msgstr "línulegan"
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "Nota línulegan ham (nauðsynlegt fyrir sum SCSI drif)"
-
-#~ msgid "User name:"
-#~ msgstr "Notandaheiti:"
-
-#~ msgid "Password:"
-#~ msgstr "Lykilorð:"
-
-#~ msgid "expert"
-#~ msgstr "snillingur"
-
-#~ msgid "developer"
-#~ msgstr "forritari"
-
-#~ msgid "beginner"
-#~ msgstr "byrjandi"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "Smíði HTP ræsidisks mistókst.\n"
-#~ "Þú gætir þurft að endurræsa og slá inn ``%s'' á skipanalínuna"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "Það þarf að byrja innsetningu upp á nýtt með nýju viðföngunum"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "Það þarf að byrja innsetninguna upp á nýtt og ræsa með diskling"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "Settu diskling í drifið til að búa til HTP ræsingu\n"
-#~ "(Öll gögn á þessum diskling tapast)"
-
-#~ msgid "A entry %s already exists"
-#~ msgstr "Nafnið %s er þegar í notkun"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "Veldu innsetningu eða uppfærslu"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "Hverskyns notkun viltu?"
diff --git a/perl-install/share/po/it.po b/perl-install/share/po/it.po
deleted file mode 100644
index 563690826..000000000
--- a/perl-install/share/po/it.po
+++ /dev/null
@@ -1,12142 +0,0 @@
-# Italian Translation of DrakX
-# Copyright (C) 1999 Mandrakesoft
-# Paolo Lorenzin <pasusu@tin.it>, 1999-2000.
-# Roberto Rosselli Del Turco <rosselli@ling.unipi.it>, 2000-2001
-# 8.0 Tech/Lang proofreading by Roberto Rosselli Del Turco
-# <rosselli@ling.unipi.it>
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX 0.1\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 1999-09-12 05:33+0200\n"
-"Last-Translator:  Roberto Rosselli Del Turco <rosselli@ling.unipi.it>\n"
-"Language-Team: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Configura tutte le testine indipendentemente"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Usa l'estensione Xinerama"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configura solo la scheda \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Configurazione multi-testine"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Il tuo sistema supporta la configurazione di più testine.\n"
-"Cosa vuoi fare?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Scheda grafica"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Scegli una scheda grafica"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Scegli un server X"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "Server X"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Che configurazione di XFree vuoi avere?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"La tua scheda può avere accelerazione 3D hardware, ma solo con XFree %s.\n"
-"La tua scheda è supportata da XFree %s che potrebbe avere un miglior "
-"supporto in 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"La tua scheda può avere il supporto per l'accelerazione 3D hardware con "
-"XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s con accelerazione 3D hardware"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"La tua scheda può avere l'accelerazione 3D hardware con XFree %s,\n"
-"NOTA CHE È UN SUPPORTO SPERIMENTALE E POTREBBE BLOCCARE IL TUO COMPUTER."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s con accelerazione 3D hardware SPERIMENTALE"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"La tua scheda può avere accelerazione 3D hardware, ma solo con XFree %s,\n"
-"NOTA CHE È UN SUPPORTO SPERIMENTALE E POTREBBE BLOCCARE IL TUO COMPUTER.\n"
-"La tua scheda è supportata da XFree %s che potrebbe avere un miglior "
-"supporto in 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installazione driver video)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "Configurazione di XFree"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Scegli la quantità di memoria della tua scheda grafica"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Scegli le opzioni per il server"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Scegli un monitor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"I due parametri critici sono la frequenza di refresh verticale, che è la "
-"frequenza\n"
-"con cui l'intero schermo è aggiornato, e ancora più importante la frequenza\n"
-"di sincronia orizzontale, che è la frequenza con cui le line di scansione "
-"sono mostrate. \n"
-"\n"
-"È MOLTO IMPORTANTE che tu non specifichi un tipo di monitor con una gamma di "
-"sincronia che vada oltre le capacità del tuo monitor: potresti "
-"danneggiarlo.\n"
-"Se hai dubbi, scegli un settaggio prudente."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Frequenza di refresh orizzontale"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Frequenza di refresh verticale"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Monitor non configurato"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Scheda grafica non ancora configurata"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Risoluzioni non ancora selezionate"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Vuoi provare la configurazione ?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Attenzione: il test di questa scheda video può bloccare il computer"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Test della configurazione"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"prova a modificare alcuni parametri"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Si è verificato un errore:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Uscita in %d secondi"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "È il settaggio corretto?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Si è verificato un errore, prova a modificare alcuni parametri"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Risoluzione"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Seleziona risoluzione e profondità di colore"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Scheda grafica: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Modo Esperto"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Mostra tutto"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Risoluzioni"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tipo di tastiera: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo di mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo del mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frequenza orizzontale del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Refresh verticale del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Scheda grafica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Scheda grafica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memoria scheda grafica: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profondità di colore: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Risoluzione: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Server XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Driver XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Sto preparando la configurazione di X-Window"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Cosa vuoi fare?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Cambia monitor"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Cambia scheda grafica"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Cambia opzioni server"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Cambia risoluzione"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Mostra informazioni"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Nuovo test"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Esci"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Mantieni le modifiche?\n"
-"La configurazione corrente è:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Per favore rientra come %s per attivare le modifiche"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Per favore esci e usa Ctrl-Alt-Backspace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X all'avvio"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Posso configurare il tuo computer per eseguire X automaticamente all'avvio.\n"
-"Vuoi che X venga eseguito quando riavvierai?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 colori (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mila colori (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mila colori (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milioni di colori (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardi di colori (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 Kb"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 Kb"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 Mb o più"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA standard, 640x480 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatibile 8514, 1024x768 a 87 Hz interlacciato (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz interlacciato, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA estesa, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA non-interlacciato, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA alta frequenza, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequenza che raggiunge 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequenza che raggiunge 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequenza che raggiunge 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor che raggiunge 1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor che raggiunge 1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Primo settore della partizione di boot"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Primo settore del disco rigido (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "Installazione di SILO"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Dove vuoi installare il bootloader?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "Installazione di LILO/grub"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO con menu in modo testo"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO con menu grafico"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Avvia da DOS/Windows (usando loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Opzioni principali del bootloader"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Bootloader da usare"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Installazione del bootloader"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Dispositivo di boot"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (non funziona con vecchi BIOS)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Compatta"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "compatta"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Modo video"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Ritardo prima di avviare con l'immagine predefinita"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Password"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Password (ripeti)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Limita opzioni della linea di comando"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "limita"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Pulisci /tmp ad ogni avvio"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precisa la dimensione RAM se necessario (trovati %d Mb)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Abilita profili multipli"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Specifica dimensione RAM in Mb"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"L'opzione ''Limita opzioni della linea di comando'' è inutile\n"
-"senza una password"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Per favore prova di nuovo"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Le password non corrispondono"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Messaggio di init"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Attesa dell'Open Firmware"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Attesa per il boot del kernel"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Abilita l'avvio da CD-ROM?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Abilita boot OF?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Sistema operativo predefinito?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Queste sono le voci attuali.\n"
-"Puoi aggiungerne altre o cambiare quelle esistenti."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Aggiungi"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Fatto"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Modifica"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Che tipo di voce vuoi aggiungere"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Altro OS (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Altro OS (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Altro OS (windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Immagine"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Aggiungi"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Lettura-scrittura"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tabella"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Non sicuro"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Etichetta"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Predefinito"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Dimensioni Initrd"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "No Video"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Rimuovi voce"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Etichetta vuota non ammessa"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Questa etichetta è già stata usata"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Trovate %s interfacce %s"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Ne hai un'altra?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Hai una qualsiasi interfaccia %s?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "No"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Sì"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Vedi informazioni hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installazione driver per scheda %s %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(modulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Quale driver %s dovrei provare?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"in alcuni casi, il driver %s ha bisogno di informazioni extra per "
-"funzionare\n"
-"correttamente, anche se normalmente può farne a meno. Vorresti specificare\n"
-"opzioni extra o lasciare che il driver cerchi sulla tua macchina le\n"
-"informazioni di cui ha bisogno? Occasionalmente, la ricerca bloccherà il\n"
-"computer, ma non dovrebbe causare alcun danno."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Investgazione automatica"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Specifica opzioni"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Adesso puoi passare le sue opzioni al modulo %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Adesso puoi passare le sue opzioni al modulo %s.\n"
-"Le opzioni sono in formato ''nome=valore nome2=valore2 ...''.\n"
-"Per esempio, ''io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Opzioni del modulo:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Caricamento del modulo %s fallito.\n"
-"Vuoi riprovare con altri parametri?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s già aggiunto)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Questa password è troppo semplice"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Per favore fornisci un nome utente"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Il nome utente deve contenere solo lettere minuscole, numeri, '-' e '_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Questo nome utente è già stato aggiunto"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Aggiungi utente"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Inserisci un utente\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Accetta utente"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Vero nome"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Nome utente"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Icona"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Posso configurare il tuo computer per eseguire X automaticamente all'avvio.\n"
-"Vuoi che X venga eseguito quando riavvierai?"
-
-#: ../../any.pm_.c:761
-#, fuzzy
-msgid "Choose the default user:"
-msgstr "Scegli la nuova dimensione"
-
-#: ../../any.pm_.c:762
-#, fuzzy
-msgid "Choose the window manager to run:"
-msgstr "Scegli l'utilità che vuoi usare"
-
-#: ../../any.pm_.c:771
-#, fuzzy
-msgid "Please, choose a language to use."
-msgstr "Per favore, scegli il tipo del tuo mouse."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-#, fuzzy
-msgid "Start Menu"
-msgstr "Status:"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Dove vuoi installare il bootloader?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "Configurazione metodo di avvio"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_File"
-
-#: ../../bootlook.pm_.c:80
-#, fuzzy
-msgid "/File/_Quit"
-msgstr "/File/-"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Monitoraggio della rete"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Cambia monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:100
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Modalità di chiamata"
-
-#: ../../bootlook.pm_.c:102
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Benvenuti nell'utilità di condivisione della connessione a Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Cliccate su ``Configura'' se volete lanciare il Wizard di configurazione."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Configura"
-
-#: ../../bootlook.pm_.c:108
-#, fuzzy
-msgid "Boot mode"
-msgstr "Dispositivo di boot"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:138
-#, fuzzy
-msgid "Launch the X-Window system at start"
-msgstr "Lancia il sistema audio sulla tua macchina"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr ""
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-#, fuzzy
-msgid "Cancel"
-msgstr "Francia"
-
-#: ../../bootlook.pm_.c:224
-#, fuzzy, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Non riesco ad aprire %s in scrittura: %s\n"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-#, fuzzy
-msgid "Installation of LILO failed. The following error occured:"
-msgstr ""
-"Installazione del bootloader fallita. Si è verificato il seguente errore:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr ""
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr ""
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "Mb"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr ""
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr ""
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d secondi"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Errore"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Nuovo"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "Rimuovi"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Punto di mount"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Opzioni"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Esegui unmount"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Esegui mount"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Scegli un'azione"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Hai una grossa partizione\n"
-"(generalmente usata da Microsoft Dos/Windows).\n"
-"Per prima cosa suggerisco di ridimensionare quella partizione\n"
-"(clicca su di essa, poi clicca su \"Ridimensiona\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Per favore clicca su una partizione"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Per favore clicca su una partizione"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Per favore clicca su una partizione"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Dettagli"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "mount fallito"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Vuoto"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Altro"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Tipo di filesystem:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Crea"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Usa ''%s'' invece"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Cancella"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Prima usa ''Unmount''"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Dopo aver cambiato tipo di partizione %s, tutti i dati su questa partizione "
-"saranno persi"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Dove vuoi fare il mount del dispositivo %s?"
-
-#: ../../diskdrake.pm_.c:500
-#, fuzzy
-msgid "Mount options"
-msgstr "Opzioni del modulo:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:525
-#, fuzzy
-msgid "Removable media"
-msgstr "Automounting di media rimovibili"
-
-#: ../../diskdrake.pm_.c:532
-#, fuzzy
-msgid "Change type"
-msgstr "Cambia il tipo di partizione"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Quale filesystem vuoi?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Server"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Scegli un'azione"
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Crea una nuova partizione"
-
-#: ../../diskdrake_interactive.pm_.c:188
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Passa a modo Esperto"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Passa a modo Normale"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Un passo indietro"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Continuo comunque?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Esci senza salvare"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Esci senza scrivere la tabella delle partizioni?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Vuoi provare la configurazione ?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Alloca automaticamente"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Azzera tutto"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Ancora"
-
-#: ../../diskdrake_interactive.pm_.c:250
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Ricerca del disco fisso"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Non c'è abbastanza spazio libero per l'allocazione automatica"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Tutte le partizioni primarie sono usate"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Non posso aggiungere altre partizioni"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Per avere più partizioni, per favore eliminarne una per essere in grado di "
-"crearne una estesa"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Scrivi la tabella delle partizioni"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Recupera tabella delle partizioni"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Recupera tabella delle partizioni"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Recupera tabella delle partizioni"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Automounting di media rimovibili"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Scegli file"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La copia di sicurezza della tabella delle partizioni non ha la stessa\n"
-"dimensione. Continuo comunque?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Attenzione"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Inserisci un floppy nel drive\n"
-"Tutti i dati su questo floppy saranno persi"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Provo a recuperare la tabella delle partizioni"
-
-#: ../../diskdrake_interactive.pm_.c:340
-#, fuzzy
-msgid "Detailed information"
-msgstr "Mostra informazioni"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Ridimensiona"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Sposta"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formatta"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Attivo"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Aggiungi a RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Aggiungi a LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Rimuovi da RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Rimuovi da LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Modifica RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Usa per loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Crea una nuova partizione"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Settore iniziale: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Dimensione in Mb: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Tipo di filesystem: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Punto di mount:"
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Preferenza: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formattazione file di loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Cambia il tipo di partizione"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "Passo da ext2 a ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Dove vuoi fare il mount del file loopback %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Non puoi deselezionare punti di mount perché questa partizione è usata\n"
-"per il loopback. Prima rimuovi il loopback"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Calcolo dei vincoli del filesystem FAT"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Ridimensionamento"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Questa partizione non è ridimensionabile"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Dovresti eseguire il backup di tutti i dati su questa partizione"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Dopo aver ridimensionato la partizione %s, tutti i dati su questa partizione "
-"saranno persi"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Scegli la nuova dimensione"
-
-#: ../../diskdrake_interactive.pm_.c:591
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Dimensione in Mb: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Su quale disco vuoi spostarlo?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Settore"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Su che settore vuoi spostarlo?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Spostamento"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Spostamento partizione..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Scegli un RAID esistente a cui effettuare l'aggiunta"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "nuovo"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Scegli un LVM esistente a cui effettuare l'aggiunta"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "Nome LVM?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Questa partizione non può essere usata per il loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Nome file loopback: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Vero nome"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "File già usato da un altro loopback, selezionane uno diverso"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Il file esiste già. Lo uso?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "dispositivo"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "livello"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "dimensione del blocco"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Fai attenzione: questa operazione è pericolosa."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Che tipo di partizionamento?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Spiacente ma non accetterò di creare /boot così avanti sul drive (su un "
-"cilindro > 1024).\n"
-"Nel caso tu usassi LILO non funzionerebbe, o se non usassi LILO non ti "
-"servirebbe /boot"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"La partizione che hai scelto di aggiungere come root (/) si trova\n"
-"fisicamente oltre il 1024esimo cilindro del disco fisso, e non hai una\n"
-"partizione /boot. Se hai intenzione di usare LILO come boot manager, "
-"accertati di creare una partizione /boot"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Hai selezionato una partizione RAID software come root (/).\n"
-"Nessun bootloader può gestirla senza una partizione /boot.\n"
-"Perciò accertati di aggiungere una partizione /boot."
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr ""
-"La tabella delle partizioni del disco %s sta per essere scritta su disco!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Sarà necessario riavviare il sistema prima che le modifiche diventino "
-"effettive!"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Dopo aver formattato la partizione %s, tutti i dati su questa partizione "
-"saranno persi"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Formattazione"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formattazione file di loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formattazione partizione %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid fallito"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Non c'è abbastanza spazio libero per allocare nuove partizioni"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Non c'è abbastanza spazio libero per allocare nuove partizioni"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Risoluzione: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Dispositivo: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lettera di drive DOS: %s (solo una supposizione)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Tipo: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Nome: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Inizia: settore %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Dimensione: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s settori"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Da cilindro %d a cilindro %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Formattato\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Non formattato\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "In linea\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"File di loopback:\n"
-"   %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partizione di boot predefinita\n"
-"    (per boot MS-DOS, non per lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Livello %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Dimensione del blocco %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Dischi RAID %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nome file di loopback: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Molto probabilmente questa partizione è\n"
-"una partizione Driver, è meglio\n"
-"non toccarla.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Questa speciale partizione di boot\n"
-"viene utilizzata per effettuare\n"
-"il dual-boot del tuo sistema.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Dimensione: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilindri, %s testine, %s settori\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Dischi LVM %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo tabella delle partizioni: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "su bus %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Opzioni: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formattazione di %s fallita"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Non so come formattare %s in tipo %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "mount fallito"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck è fallito con codice di uscita %d o segnale %d"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "mount fallito: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "errore in fase di unmount di %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "semplice"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Non puoi usare JFS per partizioni più piccole di 16 Mb"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Non puoi usare ReiserFS per partizioni più piccole di 32MB"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "I punti di mount devono iniziare con /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "C'è già una partizione con il punto di mount %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Non puoi usare un Volume Logico LVM per il punto di mount %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Questa directory dovrebbe rimanere all'interno del filesystem root"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "è un vero filesystem (ext2, reiserfs) per questa punto di mount\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Errore aprendo %s in scrittura: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Si è verificato un errore - non è stato trovata alcuna unità valida su cui "
-"creare nuovi filesystem. Per favore controlla il tuo hardware per stabilire "
-"la causa di questo problema"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Non hai alcuna partizione!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux è un sistema operativo multiutente, e questo significa che\n"
-"ciascun utente può disporre di una configurazione personalizzata, di uno\n"
-"spazio per i propri file, e così via; consultate il ''Manuale dell'utente''\n"
-"per saperne di più. Ma, a differenza di \"root\", che è l'amministratore\n"
-"del sistema, gli utenti che aggiungerete adesso non avranno il diritto di\n"
-"cambiare nulla, se non i propri file e la propria configurazione. Dovrete\n"
-"crearne almeno uno per voi stessi, e dovreste usare quello per l'uso\n"
-"quotidiano: per quanto sia molto comodo entrare nel sistema come \"root\"\n"
-"tutti i giorni, potrebbe anche essere molto pericoloso! Anche un errore\n"
-"banale potrebbe significare un sistema non più in grado di funzionare\n"
-"correttamente. Se, invece, commettete un errore, anche grave, in qualità di\n"
-"utente normale, potreste perdere parte dei vostri dati, ma non\n"
-"compromettere l'intero sistema.\n"
-"\n"
-"Prima di tutto, inserite il vostro nome reale. Naturalmente questo non è\n"
-"obbligatorio: potete digitare quello che volete. Fatto questo, DrakX\n"
-"prenderà la prima parola che avete inserito nel campo di testo e la copierà\n"
-"alla voce \"Nome utente\". Questo è il nome che l'utente dovrà usare per\n"
-"accedere al sistema, ma potete cambiarlo. Poi digitate una password per\n"
-"questo utente. La password di un utente non privilegiato dal punto di vista\n"
-"della sicurezza non è cruciale come quella di \"root\", ovviamente, ma non\n"
-"c'è motivo di essere frettolosi: dopo tutto, si tratta dei vostri file.\n"
-"\n"
-"Se cliccate su \"Accetta utente\", potrete poi aggiungerne un altro, e\n"
-"altri ancora, a vostra discrezione. Aggiungete un utente per ciascuno dei\n"
-"vostri amici, oppure per vostro padre e vostro fratello, ad esempio. Dopo\n"
-"aver aggiunto tutti gli utenti che volete, selezionate \"Fatto\".\n"
-"\n"
-"Cliccando sul pulsante \"Avanzato\" potrete cambiare la \"shell\" per\n"
-"quell'utente (come opzione predefinita è bash)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Qui sopra sono elencate le partizioni Linux esistenti individuate sul tuo\n"
-"disco rigido. Puoi tenere le scelte fatte dal wizard, sono buone per un\n"
-"uso comune. Se cambi queste scelte, devi definire almeno una partizione\n"
-"root (\"/\"). Non scegliere una partizione troppo piccola on non potrai\n"
-"installare abbastanza software. Se vuoi salvare i tuoi dati su una\n"
-"partizione separata, hai bisogno anche di una \"/home\" (possibile solo\n"
-"se hai più di una partizione Linux disponibile).\n"
-"\n"
-"\n"
-"Per informazione, ogni partizione è elencata come segue: \"Nome\", \"Capacità"
-"\".\n"
-"\n"
-"\n"
-"\"Nome\" è codificato come segue: \"tipo hard disk\", \"numero hard disk\",\n"
-"\"numero partizione\" (per esempio, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tipo hard disk\" è \"hd\" se il tuo disco fisso è di tipo IDE e \"sd\" se\n"
-"è uno SCSI.\n"
-"\n"
-"\n"
-"\"Numero hard disk\" è sempre una lettera dopo \"hd\" o \"sd\". Con dischi\n"
-"fissi IDE:\n"
-"\n"
-"   * \"a\" significa \"disco fisso master sul controller IDE primario\",\n"
-"\n"
-"   * \"b\" significa \"disco fisso slave sul controller IDE primario\",\n"
-"\n"
-"   * \"c\" significa \"disco fisso master sul controller IDE secondario\",\n"
-"\n"
-"   * \"d\" significa \"disco fisso slave sul controller IDE secondario\",\n"
-"\n"
-"\n"
-"Con dischi fissi SCSI, una \"a\" significa \"disco fisso primario\", una \"b"
-"\"\n"
-"significa \"disco fisso secondario\", etc."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"La distribuzione Mandrake Linux è suddivisa su più CDROM. DrakX sa se uno\n"
-"dei pacchetti selezionati si trova su un altro CDROM, pertanto provvederà a\n"
-"espellere il CDROM attualmente inserito nel lettore e a chiedervi di\n"
-"inserire quello corretto."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Adesso è il momento di indicare i programmi che volete siano installati sul\n"
-"vostro sistema. Ci sono migliaia di programmi disponibili per Mandrake\n"
-"Linux, e nessuno si aspetta che li conosciate tutti a memoria.\n"
-"\n"
-"Se state effettuando un'installazione standard da CDROM, per prima cosa vi\n"
-"verrà chiesto di specificare i CD in vostro possesso: controllate i CD\n"
-"della distribuzione, cliccate sulle caselle corrispondenti ai CD che avete\n"
-"e infine sul pulsante \"Ok\" quando siete pronti per continuare.\n"
-"\n"
-"I pacchetti sono organizzati in gruppi corrispondenti a usi particolari\n"
-"della vostra macchina. I gruppi sono a loro volta divisi in quattro\n"
-"sezioni:\n"
-"\n"
-" * \"Workstation\": scegliete uno o più dei gruppi di questa sezione se la\n"
-"vostra macchina verrà utilizzata prevalentemente come workstation.\n"
-"\n"
-" * \"Ambiente grafico\": scegliete qui il vostro ambiente grafico "
-"preferito.\n"
-"Indicatene almeno uno se desiderate avere una workstation grafica!\n"
-"\n"
-" * \"Sviluppo\": se la macchina verrà usata per lo sviluppo di software\n"
-"scegliete i gruppi appropriati.\n"
-"\n"
-" * \"Server\": se la macchina sarà usata come server, infine, qui potrete\n"
-"scegliere i servizi più comuni che verranno installati.\n"
-"\n"
-"Spostando il puntatore del mouse sul nome di un gruppo verrà mostrato un\n"
-"breve testo di informazioni riguardo quest'ultimo.\n"
-"\n"
-"Se lo desiderate, potete scegliere l'opzione \"Selezione individuale dei\n"
-"pacchetti\". Questa è utilissima se conoscete bene i pacchetti presenti\n"
-"nella distribuzione o se desiderate avere il totale controllo di ciò che\n"
-"verrà installato.\n"
-"\n"
-"Se avete cominciato l'installazione in modalità \"Aggiornamento\", potete\n"
-"deselezionare tutti i gruppi per evitare di installare nuovi pacchetti, in\n"
-"questo modo effettuerete soltanto il ripristino o l'aggiornamento del\n"
-"sistema esistente."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Ora, se avete scelto di indicare i pacchetti su base individuale, potete\n"
-"vedere una struttura ad albero contenente tutti i pacchetti organizzati in\n"
-"gruppi e sotto-gruppi. Mentre sfogliate questa lista gerarchica potete\n"
-"selezionare interi gruppi, sotto-gruppi o singoli pacchetti.\n"
-"\n"
-"Quando selezionate un pacchetto all'interno dell'albero, ne compare una\n"
-"descrizione sulla destra. Una volta terminata la scelta, cliccate sul\n"
-"pulsante \"Installa\" che provvederà a far partire l'installazione vera e\n"
-"propria. Il tempo necessario varia in base al numero di pacchetti che\n"
-"devono essere installati e alla velocità del vostro hardware, l'attesa\n"
-"potrebbe anche essere lunga. Una stima del tempo richiesto per finire\n"
-"l'installazione è visibile sullo schermo, in questo modo potrete sapere se\n"
-"avete tempo a sufficienza per godervi una tazza di caffé.\n"
-"\n"
-"!! Se avete selezionato un pacchetto che offre un servizio come server\n"
-"(intenzionalmente, oppure perché faceva parte di un gruppo), vi verrà\n"
-"chiesta conferma riguardo una sua effettiva installazione. Come opzione\n"
-"predefinita, in Mandrake Linux tutti i servizi installati vengono avviati\n"
-"automaticamente al momento del boot. Anche se si tratta di servizi sicuri\n"
-"al momento in cui è stata rilasciata questa versione della distribuzione,\n"
-"potrebbe succedere che vengano scoperte delle falle di sicurezza in un\n"
-"momento successivo. Se poi non avete proprio idea di quale sia la funzione\n"
-"di uno di questi pacchetti, cliccate sul pulsante \"No\". Cliccando su\n"
-"\"Sì\" i servizi elencati verranno installati e saranno attivati in maniera\n"
-"automatica. !!\n"
-"\n"
-"Disattivando l'opzione \"Mostra i pacchetti selezionati automaticamente\"\n"
-"potete disabilitare la finestra di dialogo che compare tutte le volte che\n"
-"il programma di installazione seleziona automaticamente uno o più\n"
-"pacchetti. Il programma determina in modo automatico, infatti, quali sono i\n"
-"pacchetti che sono indispensabili a un dato pacchetto (''dipendenze'')\n"
-"perché quest'ultimo possa essere installato con successo.\n"
-"\n"
-"Il piccolo dischetto floppy in fondo alla lista vi permette di caricare una\n"
-"lista di pacchetti scelti durante una precedente installazione. Cliccando\n"
-"su questa icona vi verrà chiesto di inserire un floppy che avrete creato\n"
-"alla fine di un'altra installazione. Consultate le informazioni che\n"
-"riguardano l'ultimo passo del processo di installazione per sapere come\n"
-"creare questo dischetto."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Se desiderate connettere il vostro computer a Internet o a una rete locale,\n"
-"assicuratevi di scegliere l'opzione corretta. Accendete la periferica che\n"
-"dovrete usare per connettervi prima di scegliere l'opzione adeguata, per\n"
-"permettere a DrakX di individuarla automaticamente.\n"
-"\n"
-"Mandrake Linux vi permette di configurare la vostra connessione a Internet\n"
-"durante il processo di installazione. Le connessioni disponibili sono:\n"
-"modem tradizionale, modem ISDN, connessione ADSL, connessione via cavo, e\n"
-"infine una semplice connessione a una LAN (Ethernet).\n"
-"\n"
-"Non possiamo descrivere in dettaglio le caratteristiche di ogni\n"
-"configurazione. In ogni caso, accertatevi di avere a portata di mano tutti\n"
-"i parametri indicati dal vostro fornitore di servizi internet o dal vostro\n"
-"amministratore di sistema.\n"
-"\n"
-"Per maggiori dettagli riguardo la configurazione della connessione a\n"
-"Internet potete consultare il capitolo che tratta specificamente questo\n"
-"argomento; in alternativa potete attendere di aver portato a termine\n"
-"l'installazione e usare poi il programma descritto in tale capitolo per\n"
-"configurare la connessione.\n"
-"\n"
-"Se desiderate configurare la rete dopo aver terminato l'installazione, o se\n"
-"avete già configurato la vostra rete, cliccate su \"Annulla\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"A questo punto potete scegliere i servizi da lanciare automaticamente\n"
-"all'avvio del sistema.\n"
-"\n"
-"Qui sono elencati tutti i servizi disponibili con l'installazione attuale.\n"
-"Esaminateli attentamente e disabilitate quelli che non sono sempre\n"
-"necessari all'avvio.\n"
-"\n"
-"Selezionando un servizio comparirà un breve testo di aiuto che ne spiega le\n"
-"caratteristiche. Se non siete realmente sicuri dell'utilità o meno di un\n"
-"servizio, è più prudente non modificare le impostazioni predefinite.\n"
-"\n"
-"In questa fase dell'installazione dovete fare le vostre scelte con\n"
-"particolare attenzione nel caso intendiate usare il vostro computer come\n"
-"server: probabilmente non volete che siano abilitati servizi di cui non\n"
-"avete bisogno. Ricordate che numerosi servizi sono potenzialmente\n"
-"pericolosi se attivi su un server. Come regola generale, selezionate\n"
-"soltanto quelli di cui avete effettivamente bisogno."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux gestisce il tempo in GMT, o \"Greenwich Mean Time\", e lo traduce\n"
-"in tempo locale secondo la fascia oraria da te scelta."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-"X (che sta per X Window System) è il cuore dell'interfaccia grafica di\n"
-"GNU/Linux, sulla quale sono basati tutti gli ambienti grafici che sono\n"
-"inclusi in Mandrake Linux (KDE, GNOME, Afterstep, Windowmaker...). In\n"
-"questa sezione, DrakX tenterà di configurare X automaticamente.\n"
-"\n"
-"È molto raro che non abbia successo: l'unico caso in cui ciò potrebbe\n"
-"accadere è se l'hardware in questione è molto vecchio (o molto recente). Se\n"
-"l'operazione riesce, DrakX lancerà X automaticamente, con la miglior\n"
-"risoluzione possibile, in base alle dimensioni del monitor. A quel punto,\n"
-"comparirà una finestra che vi chiederà se potete vederla.\n"
-"\n"
-"Se state effettuando un'installazione in modo \"Esperto\", verrà lanciato\n"
-"l'assistente di configurazione di X. Consultate la sezione del manuale\n"
-"dedicata a questo assistente per avere più informazioni al riguardo.\n"
-"\n"
-"Se potete vedere il messaggio e rispondete \"Sì\", allora DrakX passerà\n"
-"alla fase successiva. Se non potete vedere il messaggio, significa che la\n"
-"configurazione non andava bene, e il test terminerà automaticamente dopo 10\n"
-"secondi, riportandovi alla schermata precedente."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Può verificarsi il caso che il primo tentativo non sia quello giusto (lo\n"
-"schermo è troppo piccolo, spostato a destra o a sinistra...). Questo è il\n"
-"motivo per cui, anche se X viene lanciato correttamente, DrakX vi chiederà\n"
-"subito dopo se la configurazione va bene, e vi proporrà di cambiarla\n"
-"elencando una lista di modi video validi (in base a quello che ha potuto\n"
-"accertare) chiedendovi di sceglierne uno.\n"
-"\n"
-"Come ultima risorsa, se proprio non riuscite a far funzionare X, scegliete\n"
-"\"Cambia scheda grafica\", selezionate \"Unlisted card\", e quando vi verrà\n"
-"chiesto quale server desiderate utilizzare, scegliete \"FBDev\": si tratta\n"
-"di un'opzione a prova d'errore, che funziona con qualsiasi scheda grafica\n"
-"moderna. Quindi scegliete \"Nuovo test\" per essere sicuri."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Infine DrakX vi chiederà se desiderate utilizzare l'interfaccia grafica una\n"
-"volta terminato il processo di avvio del sistema. Notate che questa domanda\n"
-"verrà fatta anche se avete deciso di non provare la configurazione.\n"
-"Ovviamente dovrete scegliere \"No\" se la vostra macchina dovrà svolgere il\n"
-"ruolo di server, o se non siete riusciti a ottenere una configurazione\n"
-"corretta."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Il CDROM di Mandrake Linux ha una modalità ''salvataggio'' preconfigurata.\n"
-"Potete accedervi effettuando il boot dal CDROM, premendo il tasto >>F1<<\n"
-"all'avvio e digitando >>rescue<< dal prompt. Ma se il vostro computer non\n"
-"può essere avviato dal CDROM, dovete effettuare questa operazione (la\n"
-"creazione di un disco di avvio) per almeno due ragioni:\n"
-"\n"
-" * DrakX riscriverà il settore di boot (MBR) del vostro disco principale (a\n"
-"meno che voi non usiate un altro gestore del boot), in modo che possiate\n"
-"avviare sia Windows che GNU/Linux, se avete anche Windows sul vostro\n"
-"sistema. Tuttavia, se in futuro si renderà necessario re-installare\n"
-"Windows, il programma di installazione Microsoft riscriverà il settore di\n"
-"boot, e di conseguenza non sarete più in grado di avviare GNU/Linux!\n"
-"\n"
-" * se si verifica un problema per cui non potete più lanciare GNU/Linux dal\n"
-"disco rigido, questo disco floppy sarà l'unico mezzo per avviare GNU/Linux:\n"
-"contiene un buon numero di programmi di amministrazione del sistema per\n"
-"rimettere in sesto un'installazione che ha subito abbia crash per\n"
-"un'interruzione di corrente, uno sfortunato errore di battitura o qualsiasi\n"
-"altra ragione.\n"
-"\n"
-"Quando cliccherete su \"Sì\", vi verrà chiesto di inserire un disco in un\n"
-"lettore di floppy. Naturalmente il dischetto che utilizzerete deve essere\n"
-"vuoto o contenere soltanto dati di cui non avete più bisogno. Non sarà\n"
-"necessario formattarlo: DrakX riscriverà l'intero disco."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"A questo punto dovete scegliere dove installare il vostro sistema operativo\n"
-"Mandrake Linux sul disco rigido. Se il vostro disco è vuoto, oppure se un\n"
-"sistema operativo esistente sta usando tutto lo spazio disponibile, allora\n"
-"dovrete partizionarlo. In breve, partizionare un disco rigido consiste nel\n"
-"suddividerlo logicamente in maniera da creare lo spazio sufficiente per\n"
-"installare il vostro nuovo sistema operativo Mandrake Linux.\n"
-"\n"
-"Dato che gli effetti del partizionamento sono di solito irreversibili,\n"
-"questa operazione può intimidire e rivelarsi stressante per un utente\n"
-"inesperto. Fortunatamente, avete a vostra disposizione un assistente che\n"
-"semplifica questo passo. Prima di iniziare leggete attentamente il manuale,\n"
-"e prendete tutto il tempo che vi serve.\n"
-"\n"
-"Se state effettuando l'installazione in modalità Esperto, verrà lanciato\n"
-"DiskDrake, il programma di gestione e partizionamento dei dischi rigidi di\n"
-"Mandrake Linux, che vi permetterà di configurare accuratamente le vostre\n"
-"partizioni. Consultate il capitolo relativo a DiskDrake (''Gestione delle\n"
-"partizioni'') nel manuale. Potete usare gli assistenti descritti qui di\n"
-"seguito cliccando sul pulsante \"Assistente\" (ingl. \"Wizard\").\n"
-"\n"
-"Se le partizioni sono già state definite (per una precedente installazione,\n"
-"o da un'altra utilità di partizionamento), dovrete solo scegliere quelle da\n"
-"usare per installare il vostro sistema Linux.\n"
-"\n"
-"Se le partizioni non sono ancora state definite, dovete crearle usando\n"
-"l'assistente. In base alla configurazione del vostro disco rigido, saranno\n"
-"disponibili diverse soluzioni:\n"
-"\n"
-" * \"Usa spazio disponibile\": questa opzione causerà un partizionamento\n"
-"automatico del vostro disco rigido (o dischi, se ne avete più di uno). Non\n"
-"vi verrà posta nessun'altra domanda.\n"
-"\n"
-" * \"Usa partizioni esistenti\": l'assistente ha trovato una o più\n"
-"partizioni Linux sul vostro disco rigido. Se desiderate usarle scegliete\n"
-"questa opzione.\n"
-"\n"
-" * \"Usa lo spazio libero nella partizione Windows\": se Microsoft Windows "
-"è\n"
-"installato sul vostro disco rigido e occupa tutto lo spazio disponibile,\n"
-"dovrete creare spazio libero per i dati relativi a Linux. Per farlo potete\n"
-"cancellare la vostra partizione Microsoft Windows e i dati che contiene\n"
-"(usando le soluzioni \"Cancella l'intero disco\" o \"Modo Esperto\"),\n"
-"oppure ridimensionare la vostra partizione Microsoft Windows. Il\n"
-"ridimensionamento può essere effettuato evitando la perdita di dati. Questa\n"
-"è la soluzione consigliata se desiderate usare sia Mandrake Linux sia\n"
-"Microsoft Windows sullo stesso computer.\n"
-"\n"
-"   Prima di scegliere questa soluzione, tenete presente che la dimensione\n"
-"della partizione su cui risiede Microsoft Windows sarà ridotta rispetto a\n"
-"quella attuale. Significa che avrete meno spazio libero per archiviare i\n"
-"vostri dati o installare nuovo software su Windows.\n"
-"\n"
-" * \"Cancella l'intero disco\": se desiderate cancellare tutti i dati e\n"
-"tutte le partizioni presenti sul vostro disco rigido e rimpiazzarli con il\n"
-"vostro nuovo sistema Mandrake Linux, potete selezionare questa opzione.\n"
-"Fate attenzione nello scegliere questa soluzione, dopo la conferma non\n"
-"potrete più tornare indietro.\n"
-"\n"
-"   !! Se scegliete questa opzione, tutti i dati sul vostro disco andranno\n"
-"persi. !!\n"
-"\n"
-" * \"Cancella Windows\": l'effetto di questa opzione sarà di cancellare\n"
-"tutto quello che si trova sul disco e di ricominciare da capo, creando le\n"
-"partizioni su un disco vuoto. Tutti i dati presenti sul vostro disco\n"
-"andranno persi.\n"
-"\n"
-"   !! Se scegliete questa opzione, tutti i dati sul vostro disco andranno\n"
-"persi. !!\n"
-"\n"
-" * \"Modo Esperto\": se volete partizionare manualmente il vostro disco\n"
-"rigido potete scegliere questa opzione. Fate attenzione prima di optare per\n"
-"questa soluzione: è potente, ma molto pericolosa. Potreste facilmente\n"
-"causare la perdita di tutti i vostri dati. Quindi, non scegliete questa\n"
-"soluzione se non sapete cosa state facendo."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Ecco fatto: l'installazione è terminata, e il vostro sistema GNU/Linux è\n"
-"pronto per essere usato. Dovete soltanto cliccare sul pulsante \"OK\" per\n"
-"riavviare il sistema. Potete lanciare GNU/Linux o Windows (se presente),\n"
-"qualunque preferiate dei due, non appena il computer avrà terminato di\n"
-"effettuare il boot.\n"
-"\n"
-"Cliccando sul pulsante \"Avanzato\" avrete altri due pulsanti a vostra\n"
-"disposizione:\n"
-"\n"
-" * \"Crea il floppy di auto installazione\": per creare un floppy di\n"
-"installazione che permette di eseguire automaticamente un' installazione\n"
-"completa, del tutto simile a quella che avete appena finito di configurare,\n"
-"senza che sia necessario l'intervento di un operatore.\n"
-"\n"
-"   Notate che, dopo aver cliccato sul pulsante, saranno disponibili due\n"
-"opzioni diverse:\n"
-"\n"
-"    * \"Ripeti\": questa è un'installazione automatizzata solo in parte, in\n"
-"quanto la fase di partizionamento del disco (e solo quella) resta\n"
-"interattiva.\n"
-"\n"
-"    * \"Automatizzata\": l'installazione è completamente automatizzata: il\n"
-"disco rigido viene riscritto per intero, tutti i dati andranno persi.\n"
-"\n"
-"   Questa caratteristica è molto utile quando si deve installare il sistema "
-"su\n"
-"un gran numero di macchine dalle caratteristiche simili. Si veda la sezione\n"
-"Installazione automatica sul nostro sito web.\n"
-"\n"
-" * \"Salva scelta pacchetti\"(*): salva la selezione dei pacchetti\n"
-"effettuata in precedenza. Al momento di effettuare un'altra installazione,\n"
-"potrete inserire il dischetto nel lettore e installare il sistema\n"
-"richiamando lo schermo di aiuto (premendo [F1]) e digitando >>linux\n"
-"defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Sarà necessario un dischetto formattato con il filesystem FAT: per\n"
-"formattarne uno sotto GNU/Linux digitate \"mformat a:\""
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Qualsiasi partizione appena definita deve essere formattata prima di poter\n"
-"essere usata (formattare significa creare un filesystem).\n"
-"\n"
-"Potreste anche voler riformattare alcune partizioni preesistenti, per\n"
-"cancellare i dati che contengono. Se desiderate farlo, scegliete qui le\n"
-"partizioni che intendete formattare.\n"
-"\n"
-"Tenete presente che non è assolutamente necessario riformattare tutte le\n"
-"partizioni preesistenti. Dovete formattare le partizioni che contengono il\n"
-"sistema operativo (come \"/\", \"/usr\" o \"/var\"), ma potete evitare di\n"
-"riformattare partizioni che contengono dati che desiderate conservare\n"
-"(tipicamente \"/home\").\n"
-"\n"
-"Fate molta attenzione nella scelta delle partizioni, dopo la formattazione\n"
-"tutti i dati saranno cancellati e non potrete recuperarli.\n"
-"\n"
-"Cliccate su \"Ok\" quando siete pronti a formattare le partizioni.\n"
-"\n"
-"Cliccate su \"Annulla\" se desiderate scegliere altre partizioni sulle\n"
-"quali installare il vostro nuovo sistema operativo Mandrake Linux.\n"
-"\n"
-"Cliccate su \"Avanzato\" se desiderate che le partizioni selezionate\n"
-"vengano controllate per accertare la presenza di eventuali blocchi\n"
-"rovinati."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Il vostro sistema operativo Mandrake Linux è in corso d'installazione. In\n"
-"base al numero di pacchetti che devono essere installati e alla velocità\n"
-"del vostro computer, questa operazione potrebbe durare pochi minuti o\n"
-"richiedere un tempo molto lungo.\n"
-"\n"
-"Abbiate pazienza, per favore."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"Prima di proseguire dovreste leggere con attenzione le condizioni d'uso;\n"
-"queste riguardano l'intera distribuzione Mandrake Linux, e se non siete\n"
-"d'accordo con qualche punto della licenza cliccate sul pulsante\n"
-"\"Rifiuta\": la procedura di installazione sarà immediatamente interrotta.\n"
-"Per proseguire con l'installazione, invece, cliccate sul pulsante\n"
-"\"Accetta\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Ora è il momento di scegliere il livello di sicurezza desiderato per il\n"
-"vostro sistema. Come regola generale, quanto più esposta è la macchina e\n"
-"quanto più sono importanti i dati che contiene, tanto più alto dovrebbe\n"
-"essere il livello di sicurezza. Tenete presente, tuttavia, che un livello\n"
-"di sicurezza molto alto in genere viene ottenuto a spese della facilità\n"
-"d'uso. Consultate il capitolo su msec nel ''Manuale di riferimento'' per\n"
-"avere ulteriori informazioni in merito al significato di tali livelli.\n"
-"\n"
-"Se non sapete cosa scegliere, mantenete l'opzione predefinita."
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"A questo punto, devi scegliere quale(i) partizione(i) usare per installare\n"
-"il tuo nuovo sistema Mandrake Linux. Se hai già definito delle partizioni\n"
-"(per una precedente installazione di GNU/Linux o con un'altra utilità di\n"
-"partizionamento), puoi usare le partizioni esistenti. In altri casi, devono\n"
-"essere definite alcune partizioni sul disco rigido.\n"
-"\n"
-"\n"
-"Per creare partizioni, devi prima selezionare un disco fisso. Puoi "
-"selezionare\n"
-"il disco da partizionare cliccando su \"hda\" per il primo disco IDE, \"hdb"
-"\" \n"
-"per il secondo o \"sda\" per il primo disco SCSI, e così via.\n"
-"\n"
-"\n"
-"Per partizionare il disco selezionato, puoi usare queste opzioni:\n"
-"\n"
-"   * Pulisci tutto: questa opzione cancella tutte le partizioni presenti\n"
-"sul disco fisso selezionato.\n"
-"\n"
-"\n"
-"   * Assegnazione automatica: questa opzione ti permette di creare in "
-"maniera automatica delle\n"
-"partizioni Ext2 e swap nello spazio libero del tuo disco rigido.\n"
-"\n"
-"\n"
-"   * Recupera tabella partizioni: se la tua tabella delle partizioni è "
-"danneggiata, puoi provare a recuperarla usando\n"
-"     questa opzione. Fai attenzione, e ricorda che può non funzionare.\n"
-"\n"
-"\n"
-"   * Annulla: puoi usare questa opzione per cancellare le tue modifiche.\n"
-"\n"
-"\n"
-"   * Ricarica: puoi usare questa opzione se desideri annullare tutte le "
-"modifiche e caricare la tabella delle partizioni iniziale\n"
-"\n"
-"\n"
-"   * Wizard: se desideri usare un wizard per partizionare il tuo disco "
-"fisso, puoi utilizzare questa opzione. È raccomandata se\n"
-"     non sei un esperto nel partizionamento.\n"
-"\n"
-"\n"
-"   * Ripristina da floppy: se hai salvato la tua tabella delle partizioni su "
-"un floppy durante una precedente installazione,\n"
-"     puoi ripristinarla usando questa opzione.\n"
-"\n"
-"\n"
-"   * Salva su floppy: se desideri salvare la tua tabella della partizioni su "
-"un floppy per poterla rispristinare in seguito, puoi usare\n"
-"     questa opzione. È fortemente raccomandato utilizzare questa opzione.\n"
-"\n"
-"\n"
-"   * Fatto: quando hai finito di partizionare il tuo disco fisso, usa questa "
-"opzione per salvare le modifiche.\n"
-"\n"
-"\n"
-"Un'informazione utile, puoi raggiungere qualsiasi opzione usando la "
-"tastiera: naviga tra le partizioni utilizzando Tab e le frecce Su/Giù.\n"
-"\n"
-"\n"
-"Quando hai selezionato una partizione, puoi usare:\n"
-"\n"
-"               * Ctrl-c per creare una nuova partizione (quando hai "
-"selezionato una partizione vuota)\n"
-"\n"
-"               * Ctrl-d per cancellare una partizione\n"
-"\n"
-"               * Ctrl-m per assegnare il punto di mount           \n"
-"\n"
-"           \n"
-"Se stai installando Linux su una macchina PPC, è opportuno creare una "
-"piccola partizione 'bootstrap' HFS di almeno 1 Mb che verrà usata\n"
-"dal bootloader yaboot. Se decidi di farla più grande, diciamo 50 Mb, "
-"potrebbe rappresentare un utile magazzino dove stivare \n"
-"un kernel di riserva e un'immagine ramdisk per situazioni di emergenza."
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Sul tuo disco rigido è stata trovata più di una partizione Microsoft "
-"Windows.\n"
-"Per favore, scegli quella che vuoi ridimensionare per installare il tuo "
-"nuovo\n"
-"sistema operativo Mandrake Linux.\n"
-"\n"
-"Per tua informazione, ogni partizione è elencata come segue: \"Nome Linux"
-"\", \n"
-"\"Nome Windows\", \"Capacità\".\n"
-"\n"
-"\"Nome Linux\" è codificato come segue: \"tipo di disco\", \"numero del disco"
-"\",\n"
-"\"numero della partizione\" (per esempio, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tipo di disco\" è \"hd\" se il tuo disco rigido è di tipo IDE e \"sd\" se\n"
-"è uno SCSI.\n"
-"\n"
-"\n"
-"\"Numero del disco\" è sempre una lettera dopo \"hd\" o \"sd\". Con dischi\n"
-"rigidi IDE:\n"
-"\n"
-"   * \"a\" significa \"disco rigido master sul controller IDE primario\",\n"
-"\n"
-"   * \"b\" significa \"disco rigido slave sul controller IDE primario\",\n"
-"\n"
-"   * \"c\" significa \"disco rigido master sul controller IDE secondario\",\n"
-"\n"
-"   * \"d\" significa \"disco rigido slave sul controller IDE secondario\",\n"
-"\n"
-"\n"
-"Per i dischi SCSI, una \"a\" significa \"disco rigido primario\", una \"b\"\n"
-"significa \"disco rigido secondario\", etc.\"Nome Windows\" è la lettera del "
-"tuo disco rigido sotto Windows (il primo \n"
-"disco o partizione è chiamato \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-"Per favore, abbi pazienza. Questa operazione può durare parecchi minuti"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"A questo punto DrakX deve sapere se intendete effettuare un'installazione\n"
-"in modalità predefinita (\"Raccomandata\") o se preferite avere un maggior\n"
-"controllo su di essa (\"Esperto\"). Inoltre potete scegliere se effettuare\n"
-"una nuova installazione o un aggiornamento di un sistema Mandrake Linux\n"
-"esistente.\n"
-"\n"
-"Scegliete una delle seguenti modalità di installazione, in base alla vostra\n"
-"conoscenza di GNU/Linux:\n"
-"\n"
-" * Raccomandata: se non avete mai installato il sistema operativo GNU/"
-"Linux,\n"
-"scegliete questa; l'installazione sarà molto semplice e vi verranno poste\n"
-"solo poche domande;\n"
-"\n"
-" * Esperto: se avete abbastanza familiarità con GNU/Linux potete scegliere\n"
-"questa modalità, che vi permetterà di effettuare un'installazione altamente\n"
-"personalizzata. Rispondere ad alcune delle domande che vi verranno poste\n"
-"potrebbe essere difficile se non avete una buona conoscenza di GNU/Linux,\n"
-"pertanto non fate questa scelta se non sapete bene quello che state\n"
-"facendo.\n"
-"\n"
-"Scegliete quindi \"Installa\" se non sono presenti precedenti versioni di\n"
-"Mandrake Linux, o se desiderate averne più versioni installate\n"
-"contemporaneamente.\n"
-"\n"
-"Scegliete invece \"Aggiorna\" se desiderate aggiornare o ripristinare un\n"
-"sistema su cui è già presente una versione di Mandrake Linux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalmente DrakX provvede a individuare automaticamente la tastiera\n"
-"corretta (in base alla lingua che avete scelto) e voi non vedrete nemmeno\n"
-"questo passo. Tuttavia, potreste avere una tastiera che non corrisponde\n"
-"esattamente alla vostra lingua: se siete un francese che parla italiano, ad\n"
-"esempio, potreste comunque preferire una tastiera francese. Oppure, se\n"
-"parlate italiano ma vivete nel Québec, potreste trovarvi nella stessa\n"
-"situazione. In entrambi i casi, dovrete tornare a questa fase\n"
-"dell'installazione e selezionare una tastiera appropriata dalla lista.\n"
-"\n"
-"Cliccate sul pulsante \"Avanzato\" per vedere una lista completa delle\n"
-"tastiere supportate."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-"Scegliete la lingua che intendete usare per l'installazione e l'uso del\n"
-"sistema.\n"
-"\n"
-"Cliccando sul pulsante \"Avanzato\" potrete scegliere altre lingue da\n"
-"installare sul vostro computer. La selezione di altre lingue comporta\n"
-"l'installazione dei file relativi alla documentazione e alle applicazioni\n"
-"per ciascuna di esse. Se il vostro computer dovrà essere usato, ad esempio,\n"
-"anche da persone di madre lingua spagnola, potete scegliere l'italiano come\n"
-"lingua principale nella struttura ad albero e, nella sezione \"Avanzato\",\n"
-"apporre un segno di spunta sul pulsante grigio corrispondente a\n"
-"\"Spanish|Spain\".\n"
-"\n"
-"È possibile installare i file per più lingue allo stesso tempo. Dopo aver\n"
-"scelto quelle che preferite cliccate sul pulsante \"Ok\" per continuare."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-"Come opzione predefinita, DrakX vede il vostro mouse come un mouse a due\n"
-"tasti e lo imposta in modo da emulare il terzo tasto. DrakX, inoltre,\n"
-"riconosce automaticamente se si tratta di un mouse PS/2, seriale o USB.\n"
-"\n"
-"Se volete specificare un diverso tipo di mouse, scegliete il vostro modello\n"
-"dall'elenco mostrato.\n"
-"\n"
-"Se scegliete un mouse diverso dal tipo predefinito, vi verrà mostrata una\n"
-"finestra dove potrete provarlo. Provate sia i pulsanti che l'eventuale\n"
-"rotellina per controllare che la configurazione sia corretta. Se il mouse\n"
-"non funziona correttamente premete la barra spaziatrice o il tasto [Invio]\n"
-"per chiudere la finestra ed effettuare una nuova scelta."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Per favore scegli la porta corretta. La porta COM1 di MS Windows,\n"
-"ad esempio, è chiamata ttyS0 sotto GNU/Linux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Questo è il punto più critico per la sicurezza del vostro sistema\n"
-"GNU/Linux: state per decidere la password di \"root\". \"root\" è\n"
-"l'amministratore del sistema, ed è l'unico utente autorizzato a compiere\n"
-"aggiornamenti, aggiungere altri utenti, cambiare la configurazione globale\n"
-"del sistema, etc. In breve, può fare tutto ciò che vuole! Questo è il\n"
-"motivo per cui dovete scegliere una password che sia difficile da\n"
-"indovinare: DrakX vi dirà se è troppo facile. Potete anche scegliere di non\n"
-"digitare una password, ma noi vi consigliamo caldamente di farlo, almeno\n"
-"per un motivo: non pensate che, avviando il sistema con GNU/Linux, gli\n"
-"altri sistemi operativi che convivono con esso sulla stessa macchina siano\n"
-"al sicuro da errori; al contrario: \"root\" può scavalcare ogni limitazione\n"
-"e (magari involontariamente) cancellare tutti i dati presenti sulle\n"
-"partizioni accedendo in maniera scorretta a queste ultime! Quindi è molto\n"
-"importante che sia difficile per gli utenti normali diventare \"root\".\n"
-"\n"
-"La password ideale è costituita da un insieme di caratteri alfanumerici\n"
-"lungo almeno 8 caratteri. Non scrivete mai su qualche appunto la password\n"
-"di \"root\", renderebbe troppo facile l'accesso al sistema da parte di\n"
-"estranei.\n"
-"\n"
-"Prestate attenzione, tuttavia, a non scegliere una password troppo lunga o\n"
-"complicata, perché dovete essere in grado di ricordarla senza troppo\n"
-"sforzo.\n"
-"\n"
-"La password non verrà mostrata mentre la digitate. Per questo motivo è\n"
-"necessario che venga inserita due volte, per ridurre il rischio di un\n"
-"errore di battitura. Se per caso commettete lo stesso errore due volte,\n"
-"questa password \"scorretta\" sarà quella che verrà richiesta la prima\n"
-"volta che vi connetterete al sistema.\n"
-"\n"
-"In modalità Esperto vi verrà chiesto se il vostro computer è connesso a un\n"
-"server di autenticazione, secondo il protocollo NIS o LDAP.\n"
-"\n"
-"Se la vostra rete si basa sul protocollo LDAP (o NIS) per l'autenticazione,\n"
-"selezionate il pulsante \"LDAP\" (o \"NIS\") per effettuare\n"
-"l'autenticazione. Se non siete sicuri, chiedete al vostro amministratore di\n"
-"rete.\n"
-"\n"
-"Se il vostro computer non è connesso a una rete soggetta ad autenticazione,\n"
-"scegliete \"File locali\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-"LILO e GRUB sono due ''bootloader'' di GNU/Linux. Un bootloader è un\n"
-"programma per l'avvio di uno o più sistemi operativi. Questa fase, in\n"
-"genere, è del tutto automatica; DrakX, infatti, analizza il settore di boot\n"
-"del disco, e si comporta in base a quello che vi trova:\n"
-"\n"
-" * se trova un settore di boot di Windows, lo rimpiazza con un settore di\n"
-"boot di GRUB o LILO, in modo da permettervi di lanciare GNU/Linux o\n"
-"Windows;\n"
-"\n"
-" * se trova un settore di boot di GRUB o LILO, lo sostituisce con uno "
-"nuovo.\n"
-"\n"
-"In caso di dubbio, DrakX mostrerà una finestra di dialogo con varie\n"
-"opzioni:\n"
-"\n"
-" * \"Bootloader da usare\": avete tre scelte a disposizione:\n"
-"\n"
-"    * \"LILO con menu grafico\": se preferite LILO con la sua interfaccia\n"
-"grafica;\n"
-"\n"
-"    * \"GRUB\": se preferite GRUB (menu in modo testo);\n"
-"\n"
-"    * \"LILO con menu in modo testo\": se preferite LILO nella sua versione "
-"con\n"
-"menu in modo testo.\n"
-"\n"
-" * \"Dispositivo di boot\": nella maggior parte dei casi non sarà "
-"necessario\n"
-"cambiare le impostazioni predefinite (\"/dev/hda\"), ma, se lo preferite,\n"
-"il bootloader può essere installato sul secondo disco rigido\n"
-"(\"/dev/hdb\"), o persino su un floppy (\"/dev/fd0\");\n"
-"\n"
-" * \"Ritardo prima di avviare con l'immagine predefinita\": è il tempo\n"
-"lasciato all'utente per scegliere una voce diversa da quella predefinita\n"
-"nel menu del bootloader.\n"
-"\n"
-"!! Prestate particolare attenzione al fatto che, se scegliete di non\n"
-"installare un bootloader (scegliendo \"Annulla\" nella finestra di cui\n"
-"sopra), dovete essere sicuri di poter avviare il vostro sistema Mandrake\n"
-"Linux in altro modo! Accertatevi anche di sapere quello che fate se\n"
-"modificate qualcuna delle opzioni. !!\n"
-"\n"
-"Cliccando sul pulsante \"Avanzato\" di questa finestra avrete la\n"
-"possibilità di scegliere tra molte opzioni avanzate, riservate agli utenti\n"
-"esperti.\n"
-"\n"
-"Mandrake Linux provvederà a installare il proprio bootloader in modo da\n"
-"permettervi di avviare il sistema con GNU/Linux oppure con qualsiasi altro\n"
-"sistema operativo voi abbiate installato.\n"
-"\n"
-"Se sulla vostra macchina è già installato un altro sistema operativo,\n"
-"quest'ultimo verrà automaticamente aggiunto al menu di avvio. Potete anche\n"
-"scegliere di configurare con precisione le opzioni esistenti: con un doppio\n"
-"click su una delle voci potrete modificarne i parametri o rimuoverla;\n"
-"\"Aggiungi\" crea una nuova voce, mentre cliccando su \"Fatto\" passerete\n"
-"alla fase di installazione successiva."
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"SILO è un bootloader per SPARC: è in grado di caricare\n"
-"indifferentemente GNU/Linux o altri sistemi operativi presenti sul tuo "
-"computer.\n"
-"Normalmente, questi sistemi operativi sono correttamente rilevati e\n"
-"installati. Se non avviene, puoi aggiungere una voce a mano in questo "
-"schermo.\n"
-"Stai attento a scegliere i parametri corretti.\n"
-"\n"
-"\n"
-"Potresti anche non voler dare l'accesso a questi sistemi operativi a "
-"chiunque,\n"
-"nel qual caso puoi cancellare la voci corrispondenti. ma in questo caso, "
-"avrai\n"
-"bisogno di un boot disk per caricarli!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Devi indicare dove vuoi\n"
-"archiviare le informazioni richieste per il boot di GNU/Linux.\n"
-"\n"
-"A meno che tu non sappia esattamente cosa stai facendo, scegli \n"
-"Primo settore del drive (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"Ora DrakX procederà con il rilevamento di tutti i dischi rigidi e altri\n"
-"dispositivi IDE presenti sul vostro computer, e cercherà anche di stabilire\n"
-"se sul vostro sistema sono presenti una o più schede SCSI di tipo PCI. Se\n"
-"verrà individuato un dispositivo di questo tipo, DrakX installerà\n"
-"automaticamente il relativo driver.\n"
-"\n"
-"Dato che il riconoscimento automatico in alcuni casi potrebbe non riuscire\n"
-"a individuare una particolare periferica, vi verrà comunque chiesto se\n"
-"avete una scheda SCSI PCI diversa da quelle eventualmente identificate\n"
-"oppure no. Scegliete \"Sì\" se siete sicuri che nel vostro computer è\n"
-"presente un'altra scheda SCSI: potrete scegliere la vostra scheda da una\n"
-"lista. Scegliete \"No\" se non disponete di nessun tipo di hardware SCSI, o\n"
-"se siete soddisfatti del riconoscimento automatico. Se non siete sicuri,\n"
-"potete anche controllare la lista dell'hardware rilevato nella vostra\n"
-"macchina selezionando \"Vedi informazioni hardware\" e cliccando su \"Ok\".\n"
-"Controllate l'elenco dell'hardware individuato e poi cliccate sul pulsante\n"
-"\"Ok\" per ritornare alla domanda relativa alla scheda SCSI.\n"
-"\n"
-"Se sarete costretti a specificare manualmente il tipo di scheda in vostro\n"
-"possesso, DrakX vi chiederà se intendete indicare delle opzioni da usare\n"
-"con essa. Vi consigliamo di permettere a DrakX di esaminare l'hardware per\n"
-"stabilire le particolari opzioni della scheda che dovranno essere usate\n"
-"all'inizializzazione; questo metodo in genere permette di ottenere buoni\n"
-"risultati.\n"
-"\n"
-"Se DrakX non riesce a stabilire quali sono le opzioni da passare alla\n"
-"scheda, dovrete specificarle manualmente. Se non riuscite a trovare le\n"
-"informazioni necessarie nella documentazione dell'hardware o sul sito web\n"
-"del produttore (se disponete di un accesso a Internet), consultate il\n"
-"capitolo 3, al paragrafo \"Ricerca di informazioni sul vostro hardware\",\n"
-"per qualche suggerimento su come ottenerle da Microsoft Windows (se avete\n"
-"utilizzato la stessa scheda con Windows sul vostro stesso sistema)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot è un bootloader per hardware NewWorld MacIntosh. È in grado di\n"
-"avviare GNU/Linux, MacOS, o MacOSX, se presenti sul vostro computer.\n"
-"Normalmente gli altri sistemi operativi sono identificati e installati\n"
-"correttamente. Se così non fosse, potete aggiungere manualmente una voce\n"
-"in questa schermata. Accertatevi di scegliere i parametri corretti.\n"
-"\n"
-"\n"
-"Le opzioni principali di Yaboot sono:\n"
-"\n"
-"\n"
-"  - Init Message: un semplice messaggio di testo che viene mostrato prima\n"
-"del prompt di boot.\n"
-"\n"
-"\n"
-"  - Boot Device: specificate dove si trovano le informazioni richieste per \n"
-"avviare GNU/Linux. In genere è necessario prima impostare una partizione "
-"di \n"
-"bootstrap che contenga queste informazioni.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: a differenza di LILO, sono possibili due pause \n"
-"diverse. La prima si misura in secondi, e a questo punto potete scegliere \n"
-"CD, OF boot, MacOS, o Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: questa pausa è simile all'attesa di LILO.  Dopo \n"
-"aver selezionato Linux, avrai a disposizione un'attesa misurata in decimi "
-"di\n"
-"secondo prima che venga selezionata la descrizione del kernel predefinita.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: selezionando questa opzione potrai scegliere 'C' per CD "
-"al\n"
-"primo avvio del sistema.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: selezionando questa opzione potrai scegliere 'N' per "
-"Open\n"
-"Firmware al primo avvio del sistema.\n"
-"\n"
-"\n"
-"  - Default OS: puoi scegliere qual è il SO predefinito da avviare quando "
-"termina \n"
-"la pausa dell'Open Firmware."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-"Qui sono riportati vari parametri relativi al vostro sistema. In base\n"
-"all'hardware installato, potrebbero essere visualizzate le seguenti voci:\n"
-"\n"
-" * \"Mouse\": mousecontrollate la configurazione attuale del mouse, e\n"
-"cliccate sul pulsante per cambiarla, se necessario;\n"
-"\n"
-" * \"Tastiera\": tastieracontrollate l'attuale impostazione della tastiera,\n"
-"e cliccate sul pulsante per cambiarla, se necessario;\n"
-"\n"
-" * \"Fuso orario\": fuso orarioDrakX, come opzione predefinita, deduce il\n"
-"vostro fuso orario dalla lingua che avete scelto. Ma anche in questo caso,\n"
-"come per la scelta della tastiera, potreste non trovarvi nella nazione cui\n"
-"corrisponde la lingua che avete scelto; in tal caso sarà necessario\n"
-"cliccare su questo pulsante per poter configurare il fuso orario in base a\n"
-"quello dell'area geografica in cui vivete;\n"
-"\n"
-" * \"Stampante\": cliccando sul pulsante \"Nessuna stampante\" si "
-"richiamerà\n"
-"l'assistente di configurazione della stampante;\n"
-"\n"
-" * \"Scheda audio\": se sul vostro sistema è stata individuata una scheda\n"
-"audio, verrà mostrata qui. Al momento dell'installazione non è possibile\n"
-"apportare alcuna modifica;\n"
-"\n"
-" * \"Scheda TV\": se sul vostro sistema è stata individuata una scheda TV,\n"
-"verrà mostrata qui. Al momento dell'installazione non è possibile apportare\n"
-"alcuna modifica;\n"
-"\n"
-" * \"Scheda ISDN\": se sul vostro sistema è stata individuata una scheda\n"
-"ISDN, verrà mostrata qui. Potete cliccare sul pulsante relativo per\n"
-"cambiarne i parametri."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Scegli il disco rigido che vuoi cancellare per installare la tua \n"
-"nuova partizione Mandrake Linux. Attento, tutti i dati presenti su\n"
-"di esso verranno persi e non saranno recuperabili."
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Clicca su \"OK\" se vuoi cancellare tutti i dati e le partizioni\n"
-"presenti su questo disco fisso. Fai attenzione, dopo aver premuto \"OK\",\n"
-"non potrai recuperare alcun dato o partizione presenti su questo disco\n"
-"rigido, inclusi eventuali dati di Windows.\n"
-"\n"
-"Clicca su \"Cancella\" per annullare questa operazione senza perdere alcun\n"
-"dato o partizione presenti su questo disco rigido."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Hai selezionato i seguenti server: %s\n"
-"\n"
-"\n"
-"Questi server verranno attivati automaticamente. Non presenta problemi di\n"
-"sicurezza conosciuti, ma potrebbero esserne scoperti di nuovi. In tal caso,\n"
-" accertati di effettuare un aggiornamento non appena possibile.\n"
-"\n"
-"\n"
-"Vuoi davvero installare questi server?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Non posso usare broadcast senza un dominio NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Inserisci un floppy MS-DOS nel drive %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Questo floppy non è stato formattato usando MS DOS/Windows"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Per usare la selezione di pacchetti che avete salvato, dovete cominciare "
-"l'installazione digitando ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Errore leggendo il file %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Parte dell'hardware del tuo computer richiede drivers ''proprietari'' per\n"
-"funzionare. Puoi trovare informazioni al riguardo presso: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Devi avere una partizione radice.\n"
-"A questo scopo, crea una partizione (o clicca su una già esistente).\n"
-"Quindi clicca su \"Punto di mount\" e assegna '/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Devi avere una partizione di swap"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Non hai una partizione di swap\n"
-"\n"
-"Continuo comunque?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Devi avere una partizione FAT montata su /boot/efi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Usa lo spazio libero"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Non c'è abbastanza spazio libero per allocare nuove partizioni"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Usa partizione esistente"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Non c'è una partizione esistente da usare"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Usa la partizione Windows per loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Che partizione vuoi usare per Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Scegli le dimensioni"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Dimensione partizione radice in Mb: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Dimensione partizione di swap in Mb: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Usa lo spazio libero della partizione Windows"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Quale partizione vuoi ridimensionare?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Calcolo i confini del filesystem di Windows "
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Il ridimensionatore della FAT non riesce a gestire la tua partizione, \n"
-"si è verificato il seguente errore: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"La tua partizione Windows è troppo frammentata, per favore prima\n"
-"lancia ''defrag''"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATTENZIONE!\n"
-"\n"
-"DrakX ora ridimensionerà la tua partizione Windows. Stai attento: questa\n"
-"operazione è pericolosa. Se non lo hai già fatto, dovresti prima uscire\n"
-"dall'installazione, lanciare scandisk sotto Windows (e opzionalmente "
-"defrag),\n"
-"e poi riavviare l'installazione. Dovresti anche fare il backup dei tuoi "
-"dati.\n"
-"Quando sei sicuro, premi Ok."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Quanto spazio vuoi lasciare per Windows sulla"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "partizione %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Ridimensionamento FAT fallito: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Non c'è una partizione FAT da ridimensionare o da usare come loopback (o \n"
-"non c'è abbastanza spazio su di essa)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Cancella l'intero disco"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Rimuovi Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Hai più di un disco rigido, su quale vuoi installare linux?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"TUTTE le partizioni esistenti e i loro dati verranno persi sul disco %s"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Partizionamento personalizzato del disco"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Usa fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Adesso puoi partizionare %s\n"
-"Quando hai finito, non dimenticare di salvare usando 'w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Non hai sufficiente spazio libero sulla partizione Windows"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Non trovo lo spazio per installare Mandrake Linux"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"Il wizard di partizionamento di DrakX ha trovato le seguenti soluzioni:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partizionamento fallito: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Sto attivando la rete"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Sto disattivando la rete"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"C'è stato un errore, ma non so come gestirlo correttamente.\n"
-"Continua a tuo rischio e pericolo."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Punto di mount doppio: %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Alcuni pacchetti importanti non sono stati installati correttamente.\n"
-"O il lettore di cdrom o il tuo cdrom sono danneggiati.\n"
-"Controlla il cdrom su un sistema già installato digitando \"rpm -qpl "
-"mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Benvenuto a %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Nessun drive floppy disponibile"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Inizio fase '%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Scegli la dimensione dell'installazione"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Domensione totale: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versione: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Dimensioni: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Scegli i pacchetti da installare"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Info"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Installa"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Installazione"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Attendere per favore, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Tempo restante "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Tempo totale "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Sto preparando l'installazione"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Installazione del pacchetto %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Vado avanti comunque?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "C'è stato un errore ordinando i pacchetti:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Usare la configurazione esistente per X11?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Il tuo sistema ha poche risorse. Potresti avere problemi installando\n"
-"Mandrake Linux. In tal caso, in alternativa puoi provare un'installazione \n"
-"testuale. Per questo, premi 'F1' all'avvio da CDROM, poi digita 'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Classe d'installazione"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Per favore, scegli una delle seguenti classi d'installazione:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"La dimensione totale dei gruppi da te scelti è approssimativamente %d Mb.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Se desideri installare occupando una quantità di spazio minore,\n"
-"scegli la percentuale dei pacchetti che vuoi installare.\n"
-"\n"
-"Una bassa percentuale installerà solo i pacchetti più importanti;\n"
-"una percentuale del 100%% installerà tutti i pacchetti scelti."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Hai spazio sul tuo disco rigido solo per %d%% di questi pacchetti.\n"
-"\n"
-"Scegli una percentuale dei pacchetti che vuoi installare.\n"
-"Una bassa percentuale installerà solo i pacchetti più importanti;\n"
-"una percentuale del %d%% installerà tutti i pacchetti possibili."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Potrai scegliere più specificatamente nella prossima fase."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Percentuale dei pacchetti da installare"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Selezione Gruppi di Pacchetti"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Selezione individuale pacchetti"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Domensione totale: %d / %d Mb"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Pacchetto errato"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nome: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importanza: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Non puoi selezionare questo pacchetto perchè non c'è abbastanza spazio \n"
-"rimanente per installarlo"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "I seguenti pacchetti stanno per essere installati"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "I seguenti pacchetti satanno per essere rimossi"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Non puoi selezionare/deselezionare questo pacchetto"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Questo è un pacchetto obbligatorio, non può essere deselezionato"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Non puoi deselezionare questo pacchetto. è già installato"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Questo pacchetto deve essere aggiornato\n"
-"Sei sicuro di volerlo deselezionare?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Non puoi deselezionare questo pacchetto. Deve essere aggiornato"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Mostra i pacchetti selezionati automaticamente"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Carica/Salva su floppy"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "Aggiornamento scelta pacchetti"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "Installazione minima"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Sto valutando"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Per favore attendi, sto preparando l'installazione"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d pacchetti"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Attenzione\n"
-"\n"
-"Per favore leggete con attenzione il documento che segue.\n"
-"Se non siete d'accordo con una qualsiasi parte, non potete installare il CD\n"
-"successivo. Premete 'Rifiuta' per continuare l'installazione senza di esso.\n"
-"\n"
-"\n"
-"Alcune componenti software contenute nel CD successivo non sono\n"
-"soggette alla licenza GPL o a licenze simili. Ciascuna di tali componenti\n"
-"è pertanto soggetta ai termini e alle condizioni della propria\n"
-"licenza specifica. Per favore leggete con attenzione e attenetevi a tali\n"
-"licenze specifiche prima di usare o redistribuire tali\n"
-"componenti software. Tali licenze in genere proibiscono\n"
-"il trasferimento, la duplicazione (eccetto che per scopi di backup),\n"
-"la redistribuzione, il reverse engineering, il deassemblaggio,\n"
-"la decompilazione o la modifica della componente in questione.\n"
-"Qualunque infrazione del contratto porterà alla immediata cancellazione dei "
-"vostri\n"
-"diritti per quanto riguarda la specifica licenza.\n"
-"A meno che la licenza specifica non vi accordi tali diritti,\n"
-"in genere non potete installare i programmi su più di un computer, o "
-"adattarlo in\n"
-"modo che possa essere usato su una rete. In caso di\n"
-"dubbio, per favore contattate direttamente il distributore\n"
-"o il curatore della componente. Il trasferimento a terzi o la copia di tali\n"
-"componenti, documentazione inclusa, è in genere proibito.\n"
-"\n"
-"\n"
-"Tutti i diritti relativi alle componenti del CD successivo appartengono ai\n"
-"loro rispettivi autori e sono protetti dalle leggi relative alla proprietà "
-"intellettuale\n"
-"e al copyright applicabili ai programmi software.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Accetta"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Rifiuta"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Sostituisci il Cd-Rom!\n"
-"\n"
-"Per favore inserisci il Cd-Rom chiamato \"%s\" nel tuo lettore e premi Ok "
-"quando\n"
-"pronto. Se non ce l'hai, premi Annulla per evitare l'installazione da questo "
-"Cd-Rom."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "C'è stato un errore installando i pacchetti:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Si è verificato un errore"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Accordo di licenza"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduzione\n"
-"\n"
-"Nel seguito intendiamo con \"Software\" il sistema operativo e le diverse "
-"componenti disponibili\n"
-"nella distribuzione Mandrake Linux. Il Software include, ma non è limitato "
-"a, l'insieme di\n"
-"programmi, metodi, regole e documentazione relativi al sistema operativo e "
-"alle diverse componenti\n"
-"della distribuzione Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Licenza\n"
-"\n"
-"Per favore leggete con attenzione questo documento.\n"
-"Questo documento costituisce un contratto fra voi e la MandrakeSoft S.A. per "
-"quanto riguarda l'uso del Software. L'azione di installare, duplicare o "
-"usare in qualsiasi modo il Software implica l'esplicita accettazione e il "
-"pieno consenso ad adeguarsi ai termini e alle condizioni di questa Licenza. "
-"Se non siete d'accordo con uno o più punti della Licenza, non avete "
-"l'autorizzazione a installare, duplicare o utilizzare il Software. Qualunque "
-"tentativo di installare, duplicare o utilizzare il Software in modi non "
-"conformi ai termini e alle condizioni della Licenza porterà automaticamente "
-"all'annullamento della licenza e alla revoca dei vostri diritti ai sensi "
-"della stessa. Una volta invalidata la Licenza, avete l'obbligo di "
-"distruggere immediatamente tutte le copie del Software in vostro possesso.\n"
-"\n"
-"\n"
-"2. Garanzia e limiti della garanzia\n"
-"\n"
-"Il Software e la documentazione allegata sono forniti \"come sono\", senza "
-"nessuna garanzia, nei limiti permessi dalla legge. In nessun caso, e nei "
-"limiti permessi dalla legge, la MandrakeSoft S.A. potrà essere ritenuta "
-"responsabile per un qualsiasi danno, speciale, accidentale, diretto o "
-"indiretto (inclusi, senza limitazioni, danni dovuti alla perdita di attività "
-"commerciali, interruzioni dell'attività commerciale, perdite finanziarie, "
-"oneri legali e sanzioni pecuniarie che derivino da sentenze giudiziarie, o "
-"qualsiasi altra perdita conseguente), dovuto all'utilizzo o "
-"all'impossibilità di utilizzo del Software, anche nel caso in cui "
-"MandrakeSoft S.A. sia stata avvertita della possibilità che si verificassero "
-"tali danni.\n"
-"\n"
-"RESPONSABILITÀ LIMITATA IN RELAZIONE AL POSSESSO O ALL'USO DI SOFTWARE "
-"PROIBITO IN ALCUNE NAZIONI\n"
-"\n"
-"Nei limiti di legge, in nessun caso MandrakeSoft S.A. o i suoi distributori "
-"potranno essere ritenuti responsabili per un qualsiasi danno, speciale, "
-"accidentale, diretto o indiretto (inclusi, senza limitazioni, danni dovuti "
-"alla perdita di attività commerciali, interruzioni dell'attività "
-"commerciale, perdite finanziarie, oneri legali e sanzioni pecuniarie che "
-"derivino da sentenze giudiziarie, o qualsiasi altra perdita conseguente), "
-"dovuto al possesso e all'uso di componenti software, o derivante dall'aver "
-"scaricato componenti software da uno dei siti di Mandrake Linux, che "
-"risultino proibiti o soggetti a limitazioni d'uso in alcune nazioni per "
-"effetto di leggi locali. Questa limitazione di responsabilità si applica, ma "
-"non è limitata, alle componenti di crittografia sicura incluse nel "
-"Software.\n"
-"\n"
-"\n"
-"3. La Licenza GPL (\"General Public License\") e altre Licenze collegate\n"
-"\n"
-"Il Software è costituito da componenti create da persone ed enti diversi. La "
-"maggior parte di queste componenti sono soggette ai termini e alle "
-"condizioni della GNU General Public License, d'ora in poi chiamata \"GPL\", "
-"o di licenze simili. La maggior parte di queste licenze vi consente di "
-"usare, duplicare, adattare o redistribuire le componenti software che le "
-"adottano. Per favore leggete con attenzione i termini e le condizioni della "
-"licenza relativa a ciascuna componente prima di utilizzarla. Qualsiasi "
-"domanda relativa alla licenza di una componente software dovrebbe essere "
-"indirizzata all'autore di tale componente, e non alla MandrakeSoft. I "
-"programmi sviluppati dalla MandrakeSoft S.A. sono soggetti alla licenza GPL."
-"La documentazione scritta dalla MandrakeSoft S.A. è soggetta a una licenza "
-"specifica. Per favore consultate la documentazione per ulteriori dettagli.\n"
-"\n"
-"\n"
-"4. Diritti di proprietà intellettuale\n"
-"\n"
-"Tutti i diritti relativi alle componenti del Software appartengono ai "
-"rispettivi autori e sono protetti dalle leggi che disciplinano la proprietà "
-"intellettuale e il copyright applicabili ai programmi software.La "
-"MandrakeSoft S.A. si riserva il diritto di modificare o adattare il "
-"Software, in parte o in tutto, con ogni mezzo e per qualsiasi scopo."
-"\"Mandrake\", \"Mandrake Linux\" e i relativi logo sono proprietà della "
-"MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. Disposizioni diverse\n"
-"\n"
-"Se una qualsiasi parte di questo contratto è ritenuta non valida, illegale o "
-"non applicabile in seguito a sentenza giudiziaria in una determinata "
-"giurisdizione, tale parte è esclusa dal contratto. Rimangono vincolanti le "
-"altre parti applicabili del contratto.I termini e le condizioni di questa "
-"Licenza sono soggetti alle leggi vigenti in Francia.Qualsiasi disputa in "
-"merito ai termini di questa licenza verrà risolta preferibilmente per via "
-"extra-giudiziaria. Come ultima risorsa, la disputa verrà portata "
-"all'attenzione del Tribunale competente di Parigi - Francia.Per qualsiasi "
-"domanda riguardo questo documento, per favore contattate MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastiera"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Per favore, scegli l'impostazione della tastiera."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Ecco la lista completa delle tastiere disponibili"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Che classe di installazione preferisci?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Installa/Aggiorna"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "È un'installazione o un aggiornamento?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Raccomandata"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Esperto"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Aggiorna"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Per favore, scegli il tipo del tuo mouse."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Porta del mouse"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Per favore scegli a che porta seriale è connesso il mouse."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Emulazione pulsanti"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Emulazione pulsante 2"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Emulazione pulsante 3"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Configuro schede PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Sto configurando IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "nessuna partizione disponibile"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Controllo delle partizioni per trovare i punti di mount"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Scegli i punti di mount"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Non posso leggere la tua tabella delle partizioni, è troppo corrotta \n"
-"per me :( . Posso provare a continuare a svuotare le partizioni danneggiate\n"
-"(TUTTI I DATI verranno persi!). L'altra soluzione è di impedire a DrakX di\n"
-"modificare la tabella delle partizioni. (L'errore è %s)\n"
-"\n"
-"Ti va bene liberare tutte le partizioni?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Diskdrake ha fallito la lettura della tabella delle partizioni.\n"
-"Continua a tuo rischio e pericolo!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Non c'è spazio libero per un bootstrap di 1MB! L'installazione continua, ma "
-"per avviare il sistema dovrai creare la partizione di bootstrap con DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "Non ho trovato una partizione root da aggiornare"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Partizione radice"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Qual'è la partizione radice (/) del tuo sistema?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Devi resettare affinché le modifiche alla tabella delle partizioni\n"
-"abbiano effetto"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Scegli le partizioni che vuoi formattare"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Controllo blocchi danneggiati?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Formattazione partizioni"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Sto creando e formattando il file %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Swap insufficiente per completare l'installazione. Per favore, aumentane le "
-"dimensioni"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Sto cercando i pacchetti disponibili"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Sto cercando i pacchetti da aggiornare"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Il tuo sistema non ha abbastanza spazio rimanente per l'installazione o\n"
-"l'aggiornamento (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completa (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minima (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Raccomandata (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Personalizzata"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Per favore scegli di caricare o salvare la selezione pacchetti su floppy.\n"
-"Il formato è lo stesso dei floppy generati con auto_install."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Carica da floppy"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Caricamento da floppy"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Selezione pacchetti"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "Inserisci un floppy contenente la scelta dei pacchetti"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Salva su floppy"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Lo spazio indicato è maggiore dello spazio disponibile"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se hai tutti i CDs nella lista qui sopra, clicca Ok.\n"
-"Se non hai nessuno di questi CDs, clicca su Annulla.\n"
-"Se mancano solo alcuni dei CD, deselezionali, e poi clicca Ok."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom chiamato \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installazione del pacchetto %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Configurazione post installazione"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Per favore inserisci il floppy di avvio utilizzato nel drive %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Per favore inserisci il floppy di aggiornamento moduli nel drive %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Hai ora la possibilità di scaricare software per la cifratura dei dati.\n"
-"\n"
-"ATTENZIONE !\n"
-"A causa dei diversi requisiti generali applicabili a questi software e\n"
-"imposti da varie nazioni, clienti e/o utenti finali di questi software "
-"dovrebbero\n"
-"assicurarsi che le leggi della propria nazione consentano di scaricare, "
-"archiviare\n"
-"e/o usare questo tipo di software.\n"
-"\n"
-"Inoltre clienti e/o utenti finali dovrebbero prestare particolare attenzione "
-"a non infrangere\n"
-"le leggi della propria nazione. Se clienti e/o utenti finali non dovessero\n"
-"rispettare i dettami di tali leggi in vigore, potrebbero incorrere in gravi\n"
-"sanzioni.\n"
-"\n"
-"Sia Mandrakesoft sia i suoi produttori e fornitori non potranno essere "
-"ritenuti responsabili\n"
-"per danni speciali, indiretti o accidentali (inclusi, ma non limitati a, "
-"perdite\n"
-"di guadagni, interruzioni di affari, perdita di dati commerciali e altre "
-"perdite\n"
-"pecuniarie, ed eventuali multe e indennità da pagare a seguito di sentenza "
-"di \n"
-"tribunale) derivanti da uso, possesso, o semplice scaricamento di questi "
-"software,\n"
-"a cui clienti e/o utenti finali abbiano eventuale accesso dopo aver "
-"sottoscritto\n"
-"il presente accordo.\n"
-"\n"
-"Per ogni eventuale delucidazione in relazione a questo argomento, si prega "
-"di\n"
-"contattare\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Scegli un mirror da cui prendere i pacchetti"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Conessione al mirror per avere la lista dei pacchetti disponibili"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Per favore scegli i pacchetti che vuoi installare."
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Qual'è il tuo fuso orario?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "L'orologio del tuo hardware è settato su GMT"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Sincronizzazione automatica dell'ora (usando NTP)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "Server NTP"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Server CUPS remoto"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Nessuna stampante"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Riepilogo"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Mouse"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Fuso orario"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Stampante"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "Scheda ISDN"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Scheda audio"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "Scheda TV"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "File locali"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Scegli password per root"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Nessuna Password"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Questa password è troppo semplice (deve essere almeno di %d caratteri)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Autenticazione"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "Autenticazione LDAP"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "Server LDAP"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "Autenticazione NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "Dominio NIS"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "Server NIS"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Un disco di avvio personalizzato provvede un modo di accesso al tuo sistema\n"
-"Linux senza dipendere dal normale bootloader. Ciò è utile se non vuoi\n"
-"installare SILO sul tuo sistema, o un altro sistema operativo rimuove\n"
-"SILO o SILO non funziona con la tua configurazione hardware. Un disco di "
-"avvio\n"
-"personalizzato può anche essere usato con l'immagine di salvataggio di\n"
-"Mandrake, rendendo molto più facile il ripristino dopo gravi errori\n"
-"del sistema.\n"
-"\n"
-"Se vuoi creare un disco di avvio per il tuo sistema, inserisci un floppy\n"
-"nel primo drive e premi \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Primo drive floppy"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Secondo drive floppy"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Salta"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Un disco di avvio personalizzato provvede un modo di accesso al tuo sistema\n"
-"Linux senza dipendere dal normale bootloader. Ciò è utile se non vuoi\n"
-"installare LILO (o Grub) sul tuo sistema, o un altro sistema operativo "
-"rimuove\n"
-"LILO o LILO non funziona con la tua configurazione hardware. Un disco di "
-"avvio\n"
-"personalizzato può anche essere usato con l'immagine di salvataggio di\n"
-"Mandrake, rendendo molto più facile il ripristino dopo gravi errori\n"
-"del sistema. Vuoi creare un disco di avvio per il tuo sistema?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Spiacente, nessun drive floppy disponibile"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Scegli il drive floppy che vuoi utilizzare per creare il disco di avvio"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Inserisci il floppy nel drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Creazione disco di avvio"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Preparazione del bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Apparentemente disponi di una macchina OldWorld o\n"
-" sconosciuta, il bootloader yaboot non andrà bene per te.\n"
-"L'installazione continuerà, ma dovrai usare\n"
-" BootX per avviare il tuo computer"
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Vuoi usare aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Errore installando aboot, \n"
-"provo a forzare l'installazione anche se ciò distrugge la prima partizione?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Installa bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Installazione del bootloader fallita. Si è verificato il seguente errore:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Potrebbe essere necessario cambiare il dispositivo di boot Open Firmware\n"
-" per abilitare il bootloader. Se non vedete il prompt del bootloader\n"
-" dopo il riavvio, premete Command-Option-O-F al riavvio e digitate:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Poi digitate: shut-down\n"
-"Al boot successivo dovreste vedere il prompt del bootloader."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Basso"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Medio"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Alto"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Scegli livello di sicurezza"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Inserisci un floppy vuoto nel drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Sto creando il floppy di auto installazione"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Alcune fasi non sono completate.\n"
-"\n"
-"Vuoi veramente interrompere adesso?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Congratulazioni, l'installazione è completa.\n"
-"Rimuovi il disco di avvio e premi Invio per riavviare il sistema.\n"
-"Per informazioni su aggiornamenti disponibili per questa release di Linux\n"
-"Mandrake, consulta l'Errata disponibile su http://www.mandrakelinux.com/.\n"
-"Informazioni su come configurare il tuo sistema sono disponibili nel "
-"capitolo\n"
-"sulla post-installazione della Guida Ufficiale dell'Utente Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Crea il floppy di auto installazione"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"L'auto installazione può essere del tutto automatizzata se desiderate,\n"
-"ma in tal caso il programma partizionerà automaticamente il disco!!\n"
-"(questa opzione è pensata per l'installazione su un'altra macchina).\n"
-"\n"
-"Probabilmente preferirete ripetere l'installazione.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automatizzata"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Ripeti"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Salva scelta pacchetti"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Installazione Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> muove il cursore   | <Barra> seleziona | <F12> videata succ."
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu manca"
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "Scegli un'azione"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Avanzato"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Attendere prego"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Espandi struttura"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Raggruppa struttura"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Cambia tra ordinamento semplice o a gruppi"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Ambiguità (%s), cerca di essere più preciso\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Scelta errata, prova di nuovo\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (default %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "La tua scelta? (default %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "La tua scelta? (default %s inserisci 'none' per nessuna) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Ceca (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Tedesca"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Spagnola"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Finlandese"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Francese"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norvegese"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Polacca"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Russa"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Svedese"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Tastiera UK"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "Tastiera US"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Albanese"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armena (vecchia)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armena (macchina da scrivere)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armena (fonetica)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjana (latina)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulgara"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiliana (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Bielorussa"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Svizzera (mappa tedesca)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Svizzera (mappa francese)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Ceca (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Tedesca (nessun tasto morto)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Danese"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norvegese)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estone"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiana (mappa \"Russa\")"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiana (mappa \"Latina\")"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Greca"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Ungherese"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Israeliana"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Israeliana (Fonetica)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iraniana"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islandese"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Italiana"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Giapponese 106 tasti"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Tastiera Coreana"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latino Americana"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituana AZERTY (vecchia)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituana AZERTY (nuova)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituana \"numero riga\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituana \"fonetica\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "Posizione"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Macedone"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Olandese"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Polacca (mappa qwerty)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Polacca (mappa qwertz)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portoghese"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Canadese (Quebec)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Romena (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Romena (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Russa (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Slovena"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovacca (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovacca (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaidjana (cirillica)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Tastiera Thai"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Tastiera Thai"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turca (modulo \"F\" tradizionale)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turca (modello \"Q\" moderno)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ucraina"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "Tastiera US (internazionale)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"riga numerica\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslava (latino)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Mount circolari %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Prima rimuovi i volumi logici\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Normale"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Mouse con rotellina su porta PS2 generico "
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius Netscorll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 pulsante"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Generico"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Ruota"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "seriale"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Mouse generico a 2 Pulsanti"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Mouse generico a 3 Pulsanti"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech serie CC (seriale)"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "Serie MM"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Mouse Logitech (seriale, vecchio tipo C7)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 pulsanti"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 pulsanti"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "nessuno"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Nessun mouse"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Per favore prova il mouse"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Per attivare il mouse"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "MUOVI LA RUOTA!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Finisci"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Avanti ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Indietro"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "È corretto?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Connetti a Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Il modo più comune per connettersi con adsl è pppoe.\n"
-"Alcune connessioni usano pptp, poche usano dhcp.\n"
-"Se non sai, scegli 'usa pppoe'."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "usa dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "usa pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "usa pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Quale cliente dhcp vuoi usare?\n"
-"Quello predefinito è dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nessun adattatore di rete ethernet è stato rilevato nel tuo sistema.\n"
-"Non posso configurare questo tipo di connessione."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Scegli l'interfaccia di rete"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Per favore scegli quale adattatore di rete vuoi usare per connetterti a "
-"Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nessuna scheda di rete trovata"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Sto configurando la rete"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Per favore inserisci il tuo nome host se lo conosci.\n"
-"Alcuni server DHCP richiedono il nome host per funzionare.\n"
-"Il tuo nome host dovrebbe essere un nome pienamente qualificato,\n"
-"come ''mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Nome host"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Wizard della configurazione di rete"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem ISDN esterno"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Scheda ISDN interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Di che tipo è la tua connessione ISDN?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Che configurazione ISDN preferisci?\n"
-"\n"
-"* La Vecchia configurazione usa isdn4net. Contiene strumenti potenti,\n"
-"  ma è difficile da configurare per un principiante, e non standard.\n"
-"\n"
-"* La Nuova configurazione è più facile da capire, più aderente allo\n"
-"  standard, ma dispone di un numero di strumenti inferiore.\n"
-"\n"
-"Raccomandiamo la configurazione leggera.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nuova configurazione (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Vecchia configurazione (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "Configurazione ISDN"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Scegli il tuo provider.\n"
-" Se non è nella lista, scegli Fuori Lista"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "Protocollo per l'Europa"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "Protocollo per l'Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "Protocollo per il resto del mondo"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protocollo per il resto del mondo \n"
-" no D-Channel (linee in affitto)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Quale protocollo vuoi usare?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Che tipo di scheda hai?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Non so"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Se hai una scheda ISA, i valori nella prossima schermata dovrebbero essere "
-"giusti.\n"
-"\n"
-"Se hai una scheda PCMCIA, devi sapere IRQ e I/O della tua scheda.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Annulla"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Continua"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Qual'è la tua scheda ISDN?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ho trovato una scheda ISDN PCI, ma non so di che tipo. Per favore seleziona "
-"una scheda PCI nella prossima schermata."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Non trovo nessuna scheda ISDN PCI. Per favore selezionane una \n"
-"nella prossima schermata."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Per favore scegli a che porta seriale è connesso il tuo modem."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Opzioni di chiamata"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Nome connessione"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Numero telefonico"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "ID di accesso"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Basata su script"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Basata su terminale"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Nome dominio"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Primo server DNS (opzionale)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Secondo server DNS (opzionale)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Puoi disconnetterti o riconfigurare la tua connessione."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Puoi configurare nuovamente la connessione."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Adesso sei connesso a Internet"
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Puoi connetterti a Internet o configurare nuovamente la connessione."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "In questo momento non sei connesso a Internet"
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Connetti a Internet"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Disconnetti da internet"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Configura una connessione di rete (LAN o Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Connessione & configurazione Internet"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Adesso proseguiremo con la configurazione della connessione %s."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Stiamo per configurare la connessione %s.\n"
-"\n"
-"\n"
-"Premi OK per cominciare."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Configurazione della rete"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Dato che stai effettuando una installazione via rete, quest'ultima è già "
-"configurata.\n"
-"Clicca su Ok per mantenere questa configurazione, o su Annulla per "
-"riconfigurare la rete e la connessione a Internet.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Benvenuti nel Wizard di configurazione della Rete!\n"
-"\n"
-"Stiamo per configurare la vostra connessione di rete/a Internet.\n"
-"Se non volete usare il riconoscimento automatico, deselezionate il \n"
-"pulsante d'opzione.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Scegli il profilo da configurare"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Usa il riconoscimento automatico"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Riconoscimento periferiche..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Connessione normale via modem"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "rilevato sulla porta: %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "Connessione ISDN"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "rilevato %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "Connessione ADSL"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "rilevato sull'interfaccia %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Connessione via cavo"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "Rilevata connessione via cavo"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "Connessione LAN"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "rilevata scheda(e) ethernet"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Scegli il tipo di connessione che vuoi configurare"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Hai configurato diversi tipi di connessione a Internet.\n"
-"Scegli quello che vuoi usare.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Connessione a Internet"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Vuoi effettuare la connessione all'avvio?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Configurazione della rete"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Si è verificato un problema al momento di riavviare la rete: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Congratulazioni, la configurazione della rete e di Internet è finita.\n"
-"\n"
-"Adesso questa configurazione verrà applicata al vostro sistema.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Dopo che questo sarà stato fatto, vi raccomandiamo di riavviare il\n"
-"vostro ambiente X per evitare problemi relativi al cambio di hostname."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ATTENZIONE: questo dispositivo è stato precedentemente configurato per\n"
-"connettersi a Internet.\n"
-"Devi solo cliccare su OK per mantenere la precedente configurazione.\n"
-"Modifiche ai campi qui sotto cambieranno questa configurazione."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Per favore inserisci la configurazione IP per questa macchina.\n"
-"Ogni dato dovrebbe essere inserito come un indirizzo IP in notazione\n"
-"decimale puntata (ad esempio 1.2.3.4.)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Sto configurando il dispositivo di rete %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "Indirizzo IP"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "IP automatico"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "L'indirizzo IP deve essere in formato 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Per favore inserisci il tuo nome host.\n"
-"Il tuo nome host dovrebbe essere uno pienamente qualificato,\n"
-"come ''mybox.mylab.myco.com''.\n"
-"Puoi anche inserire l'indirizzo IP del gateway se ne hai uno."
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "Server DNS"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Dispositivo di gateway"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Configurazione dei proxy"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Il proxy dovrebbe essere http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Il proxy dovrebbe essere ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Configurazione di internet"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Vuoi provare a connetterti a Internet adesso?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Sto provando la tua connessione ..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Adesso il sistema è connesso a Internet"
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Per ragioni di sicurezza, adesso verrà disconnesso."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Il sistema non sembra essere connesso a Internet.\n"
-"Prova a configurare nuovamente la connessione."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Configurazione della Connessione"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Per favore riempi o controlla il campo qui sotto"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ della scheda"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Memoria della scheda (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "IO della scheda"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "IO_0 della scheda"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "IO_1 della scheda"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Il tuo numero di telefono personale"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Nome del provider (es. provider.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Numero telefonico del provider"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "Dns 1 del provider (opzionale)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "Dns 2 del provider (opzionale)"
-
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "Scegli la tua tastiera"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Modalità di chiamata"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Velocità della connessione"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Tempo di connessione: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Login dell'account (nome utente)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Password dell'account"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Partizione estesa non supportata su questa piattaforma"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Hai un buco nella tua tabella delle partizioni, ma io non posso usarlo.\n"
-"L'unica soluzione è di muovere le tue partizioni primarie per avere il buco "
-"vicino alle partizioni estese"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Ripristino da file %s fallito: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "File di backup errato"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Errore scrivendo sul file %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Al tuo disco sta accadendo qualcosa di brutto. \n"
-"Un test per verificare l'integrità dei dati è fallito. \n"
-"Significa che scrivere qualsiasi cosa sul disco genererà solo spazzatura a "
-"caso"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "da avere"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "importante"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "molto bello"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bello"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "forse"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Stampante locale"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Stampante remota"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Server CUPS remoto"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Server lpd remoto"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Stampante di rete (socket)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Server della stampante"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "URI della stampante"
-
-#: ../../printer.pm_.c:48
-#, fuzzy
-msgid "Pipe job into a command"
-msgstr "Invia tramite pipe al comando"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modulo %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Scegli Connessione stampante"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Com'è collegata la stampante?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"Con un server remoto CUPS, non devi configurare alcuna stampante\n"
-"adesso: le stampanti saranno individuate automaticamente.\n"
-"In caso di dubbi, scegli \"server remoto CUPS\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Nessuno"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Scegli la nuova dimensione"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Chiudi"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "Stampante remota"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "L'indirizzo IP deve essere in formato 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Il numero della porta dovrebbe essere in cifre"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "Stampante locale"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "IP del server CUPS"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Porta"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Configurazione metodo di avvio"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Riconoscimento periferiche..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Test delle porte"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Una stampante, modello \"%s\", è stata trovata su "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Dispositivo della stampante Locale"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"A quale dispositivo è collegata la tua stampante \n"
-"(nota che /dev/lp0 è equivalente a LPT1:)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Dispositivo della stampante"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "Nome del dispositivo/file assente!"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Sto leggendo l'archivio dei driver CUPS"
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Opzioni stampante lpd remota"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Per usare una coda di stampa lpd remota, devi fornire\n"
-"il nome dell'host del server della stampante e il nome della coda\n"
-"sul server."
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nome host remoto"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Stampante remota"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "Nome host remoto assente!"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nome host remoto assente!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opzioni Stampante SMB (Windows9x/NT)"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Per stampare su una stampante SMB, devi fornire il nome\n"
-"dell'host SMB (non sempre corrisponde al nome host TCP/IP\n"
-"della macchina) e possibimente l'indirizzo IP del server di stampa, così\n"
-"come il nome di condivisione per la stampante cui vuoi accedere e ogni\n"
-"informazione utile riguardo nome dell'utente, password e gruppo di lavoro."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "Host del server SMB"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "IP del server SMB"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Nome di condivisione"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Gruppo di lavoro"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Devi indicare il nome del server o il numero IP dello stesso!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "Il nome della condivisione Samba è assente!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "Opzioni stampante NetWare"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Per stampare su una stampante NetWare, devi fornire il nome\n"
-"del server di stampa NetWare (Nota! potrebbe essere diverso dal nome\n"
-"del suo host TCP/IP) insieme al nome della coda di stampa per la\n"
-"stampante cui vuoi accedere e ogni nome utente e password applicabili."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Server della stampante"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Nome della coda di stampa"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "Il nome del server NCP è assente"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "Il nome dellla coda NCP è assente!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Opzioni del socket della stampante"
-
-#: ../../printerdrake.pm_.c:528
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Per stampare su una stampante di socket, devi indicare il\n"
-"nome host della stampante e opzionalmente il numero di porta."
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "Nome host della stampante"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "Nome host della stampante assente!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "URI della stampante"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Potete indicare direttamente l'URI di accesso alla stampante. Tale URI deve "
-"essere conforme alle specifiche CUPS o Foomatic. Notate che non tutti i i "
-"tipi di URI sono supportati da tutti gli spooler."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "Dev'essere inserito un'URI valido!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Ogni stampante deve avere un nome (ad esempio lp).\n"
-"Non è indispensabile riempire i campi Descrizione e \n"
-"Posizione. Si tratta di commenti per gli utenti."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Nome della stampante"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Descrizione"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Posizione"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Sto leggendo l'archivio dei driver CUPS"
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "Scelta del modello della stampante"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "Che modello di stampante hai?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Configurazione di internet"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Configurazione di internet"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, fuzzy, c-format
-msgid "Option %s must be an integer number!"
-msgstr "La porta dev'essere indicata da un numero intero!"
-
-#: ../../printerdrake.pm_.c:1094
-#, fuzzy, c-format
-msgid "Option %s must be a number!"
-msgstr "La porta dev'essere indicata da un numero intero!"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Vuoi stampare una pagina di prova?"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "Test delle porte"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-#, fuzzy
-msgid "No test pages"
-msgstr "Sì, stampa entrambe le pagine di prova"
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "Stampante"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "Programmi di utilità standard"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Stampa della(e) pagina(e) di prova..."
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "Stampa della(e) pagina(e) di prova..."
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Stampa della(e) pagina(e) di prova..."
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"La pagina(e) di prova è stata inviata alla stampante.\n"
-"Potrebbe occorrere un po' di tempo prima che la stampa inizi.\n"
-"Stato della stampa:\n"
-"%s\n"
-"\n"
-"Funziona correttamente?"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"La pagina(e) di prova è stata inviata alla stampante.\n"
-"potrebbe occorrere un po' di tempo prima che la stampa inizi.\n"
-"Funziona correttamente?"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Nessuna stampante"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Sto disattivando la rete"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "Opzioni stampante"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Sto leggendo l'archivio dei driver CUPS"
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Configurazione di internet"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Il nome della stampante dovrebbe contenere solo lettere, numeri e il "
-"trattino di sottolineatura"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "Nessuna stampante"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Sto leggendo l'archivio dei driver CUPS"
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Configura stampante"
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Sto attivando la tua connessione ..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Configura rete"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor non configurato"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Sto configurando la rete"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Che sistema di stampa vuoi usare?"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "high"
-msgstr "alto"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "paranoid"
-msgstr "paranoico"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Che sistema di stampa vuoi usare?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Scegli il sistema di stampa"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Che sistema di stampa (spooler) vuoi usare?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configura stampante"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Opzioni stampante"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Sto leggendo l'archivio dei driver CUPS"
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "Vorresti configurare la stampa?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Modo Normale"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Predefinito)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Server CUPS remoto"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "Server CUPS remoto"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Aggiungi stampante"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Vuoi provare la configurazione ?"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Configurazione di internet"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Connessione a Internet"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Scelta del modello della stampante"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "Stampa della(e) pagina(e) di prova..."
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "Stampante remota"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Sto leggendo l'archivio dei driver CUPS"
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Vuoi far ripartire la rete?"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Sto leggendo l'archivio dei driver CUPS"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Configurazione dei proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Benvenuto nell'utilità di configurazione dei proxy.\n"
-"\n"
-"Qui potrai configurare i tuoi proxy http e ftp,\n"
-"con o senza login e password\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Per favore completa le informazioni relative al proxy http\n"
-"Lascia in bianco se non desideri un proxy http"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "Porta"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "L'URL dovrebbe cominciare con 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Il numero della porta dovrebbe essere in cifre"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Per favore completa le informazioni relative al proxy ftp\n"
-"Lascia in bianco se non desideri un proxy ftp"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "L'URL dovrebbe cominciare con 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Per favore inserisci il login e la password per il proxy, se esistono.\n"
-"Lascia in bianco se non è necessario."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Password"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "digita ancora la password"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Le password non corrispondono. Prova ancora!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Non posso aggiungere una partizione a _RAID_ formattato md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Non posso scrivere il file %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid fallito"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid fallito (forse manca raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Non ci sono abbastanza partizioni per RAID livello %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Lancia il sistema audio ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, un gestore di comandi periodici."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd è usato per monitorare lo stato delle batterie e fare il log tramite\n"
-"syslog. Può anche essere usato per spegnere la macchina quando la batteria\n"
-"è scarica."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Lancia comandi programmati dal comando at al momento specificato quando\n"
-"at è stato lanciato, e lancia comandi batch quando il carico medio è\n"
-"sufficientemente basso."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron è un programma UNIX standard che lancia programmi definiti dall'utente\n"
-"a intervalli periodici programmati. vixie cron aggiunge un numero di "
-"funzioni\n"
-"al cron UNIX di base, inclusi maggior sicurezza e opzioni di "
-"configurazione \n"
-"più potenti."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM aggiunge il supporto del mouse ad applicazioni Linux basate su testo "
-"come\n"
-"Midnight Commander. Permette anche operazioni taglia/incolla via mouse in \n"
-"console e include supporto per dei menu a scomparsa in console."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake esegue un'indagine riguardo l'hardware, e opzionalmente\n"
-"configura l'hardware nuovo/cambiato."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache è un server per World Wide Web. È usato per gestire files HTML\n"
-"e CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Il demone superserver di Internet (comunemente chiamato inetd) avvia una\n"
-"varietà di altri servizi Internet a richiesta. È responsabile per l'avvio\n"
-"di molti servizi, inclusi telnet, ftp, rsh, e rlogin. Disabilitando inetd\n"
-"si disabilitano tutti i servizi di cui è responsabile."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Lancio del filtro dei pacchetti per la serie di kernel 2.2, allo\n"
-"scopo di impostare un firewall che protegga la tua macchina da intrusioni."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Questo pacchetto carica la mappa di tastiera selezionata come definito in\n"
-"/etc/sysconfig/keyboard, che può essere scelta usando l'utilità kdbconfig.\n"
-"Dovresti lasciarlo abilitato per la maggior parte delle macchine."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Rigenerazione automatica dell'intestazione del kernel /boot per\n"
-"/usr/include/linux/{autoconf,versione}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Individuazione e configurazione automatica dell'hardware al boot."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf talvolta deve eseguire alcune operazioni al momento\n"
-"del boot per gestire la configurazione del sistema."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd è il demone di stampa richiesto perchè lpr funzioni propriamente. È\n"
-"fondamentalmente un server che distribuisce i job di stampa alle stampanti."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, usato per impostare un server ad alte prestazioni\n"
-"e alta disponibilità."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) è un Domain Name Server (DNS) utilizzato per risolvere\n"
-"nomi host in indirizzi IP."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monta e smonta tutti i punti di mount di Network File System (NFS),\n"
-"SMB (Lan Manager/Windows), e NCP (Netware)."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Attiva/Disattiva tutte le interfacce di rete di cui è previsto l'avvio\n"
-"al momento del boot."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS è un popolare protocollo per la condivisione di file attraverso reti\n"
-"TCP/IP. Questo servizio consente funzionalità di server NFS, che sono\n"
-"configurate tramite il file /etc/exports."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS è un popolare protocollo per la condivisione di file attraverso reti TCP/"
-"IP.\n"
-"Questo servizio consente funzionalità di blocco dei file NFS."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Attiva automaticamente il tasto relativo al tastierino numerico\n"
-"per la console e XFree al momento del boot."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Supporto per le stampanti Windows OKI 4w e compatibili."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Il supporto PCMCIA di solito serve per usare dispositivi di tipo ethernet e\n"
-"modem nei portatili. Non sarà lanciato se non è stato configurato, perciò "
-"è \n"
-"sicuro da avere installato anche su macchine che non lo richiedono."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Il portmapper gestisce connessioni RPC, che sono usate da protocolli\n"
-"come NFS e NIS. Il server portmap deve essere in esecuzione su macchine che\n"
-"agiscono come server per protocolli che fanno uso di meccanismi RPC."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix è un Agente di Trasporto di Posta, un programma che\n"
-"sposta messaggi da una macchina ad un'altra."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Salva e ripristina l'entropia del sistema per una generazione di numeri\n"
-"casuali di alta qualità."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Assegna dispositivi raw a dispositivi a blocchi (quali le partizioni\n"
-"di un disco rigido), da usare con applicazioni come Oracle."
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Il demone routed permette tabelle di router IP automatiche aggiornate per\n"
-"mezzo del protocollo RIP. Mentre RIP è largamente usato in piccole reti, \n"
-"protocolli di routing più complessi sono necessari per reti più complesse."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Il protocollo rstat permette agli utenti di una rete di recuperare\n"
-"misurazioni delle prestazioni per ogni macchina di quella rete."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Il protocollo rusers permette agli utenti di una rete di identificare\n"
-"chi è connesso su una macchina interrogata in proposito."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Il protocollo rwho permette a utenti remoti di ottenere una lista di \n"
-"tutti gli utenti connessi a una macchina su cui gira il demone rwho\n"
-"(similarmente a finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Lancia il sistema audio sulla tua macchina"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog è una utilità che molti demoni usano per aggiungere messaggi\n"
-"in vari file di log di sistema. È una buona idea lanciare sempre syslog."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Carica i driver per i tuoi dispositivi USB."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Avvia il server di caratteri (indispensabile per eseguire XFree)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Scegli quali servizi saranno lanciati automaticamente all'avvio."
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "Stampante"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "Mouse Systems"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Opzioni stampante lpd remota"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Database"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "Server"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "in esecuzione"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "fermato"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servizi e demoni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Spiacente, ma non ci sono ulteriori\n"
-"informazioni riguardo questo servizio."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Al boot"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Installazione del pacchetto %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Non posso leggere la tua tabella delle partizioni, è troppo\n"
-"corrotta per me :( . Proverò a cancellare le partizioni rovinate."
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "Errore!"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Configurazione post installazione"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Configurazione metodo di avvio"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Congratulazioni!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Condivisione connessione Internet"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Condivisione della connessione a Internet attualmente abilitata"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Il setup della condivisione della connessione Internet è già stato fatto.\n"
-"È attualmente abilitata.\n"
-"\n"
-"Cosa vorresti fare?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "disabilita"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "abbandona"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "riconfigura"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Sto disattivando i server..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "La condivisione della connessione a Internet ora è disabilitata."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Condivisione connessione Internet attualmente disabilitata"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Il setup della condivisione della connessione internet è già stato fatto.\n"
-"È attualmente disabilitata.\n"
-"\n"
-"Cosa vorresti fare?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "abilita"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Sto attivando i server..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "La condivisione della connessione a Internet ora è abilitata."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Stai per configurare il tuo computer per condividere la sua connessione a "
-"Internet.\n"
-"Grazie a questa caratteristica, altri computer sulla tua rete locale "
-"potranno usare la connessione a Internet di questa macchina.\n"
-"\n"
-"Nota: è necessario un Adattatore di Rete dedicato per realizzare una\n"
-"Rete di Area Locale (LAN)."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfaccia %s (usa il modulo %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Interfaccia %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Nessun adattatore di rete nel tuo sistema!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nessun adattatore di rete ethernet è stato rilevato nel tuo sistema. Per "
-"favore lancia l'utilità di configurazione hardware."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Interfaccia di rete"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"C'è un solo adattatore di rete configurato nel tuo sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Sto per configurare la tua rete locale (LAN) usando quell'adattatore."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Per favore scegli quale adattatore di rete sarà connesso alla tua rete "
-"locale (LAN)."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Attenzione, l'adattatore di rete è già configurato. Procedo a una nuova "
-"configurazione."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Trovato conflitto potenziale dell'indirizzo LAN nella configurazione "
-"corrente di %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Rilevata configurazione di Firewall!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Attenzione! È stata rilevata una configurazione di firewall esistente. "
-"Potrebbe avere bisogno di alcuni aggiustamenti manuali dopo l'installazione."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Sto configurando..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Sto configurando gli script, installando il software, avviando i server..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemi nell'installazione del pacchetto %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Ogni cosa è stata configurata.\n"
-"Ora puoi condividere la connessione a Internet con altri computers sulla tua "
-"rete locale (LAN) usando la configurazione di rete automatica (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Il setup è già stato fatto, ma è attualmente disabilitato."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Il setup è già stato fatto, ed è attualmente abilitato."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr ""
-"Nessuna condivisione della connessione a Internet configurata in precedenza."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Configurazione della connessione a Internet"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Benvenuti nell'utilità di condivisione della connessione a Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Cliccate su ``Configura'' se volete lanciare il Wizard di configurazione."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configurazione della rete (%d adattatori)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profilo: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Cancella profilo..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Profilo da cancellare:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Nuovo profilo..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Nome host: "
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Accesso a Internet"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Tipo:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Interfaccia:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Connesso"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Non connesso"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Connetti..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Disconnetti..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Sto attivando la tua connessione ..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Sto disattivando la tua connessione ..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"La connessione non è stata chiusa.\n"
-"Prova a farlo manualmente lanciando\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"come root."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Adesso il sistema è disconnesso."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Configura l'accesso a Internet"
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "Configurazione LAN (rete locale)"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Interfaccia"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protocollo"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "State"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Configura rete locale (LAN)"
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Applica"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Per favore attendi... sto applicando la configurazione"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Non disponi di nessuna interfaccia configurata.\n"
-"Per prima cosa configurale cliccando su 'Configura'"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "Configurazione rete locale (LAN)"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adattatore %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Protocollo di boot"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Attivato/a al momento del boot"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "activate now"
-msgstr "Attivo"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "desactivate now"
-msgstr "Attivo"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Non disponi di una connessione a Internet.\n"
-"Creane una cliccando su 'Configura'"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Configurazione della connessione a Internet"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Configurazione della connessione a Internet"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Tipo di connessione: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parametri"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Scheda ethernet"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Benvenuti cracker"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Scarso"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoico"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Questo livello va usato con cura. Rende il sistema più facile da usare,\n"
-"ma molto delicato: non deve essere usato per una macchina connessa ad altre\n"
-"o a Internet. Non c'è nessun accesso con password."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Ora le password sono abilitate, ma l'uso come computer di rete è comunque\n"
-"ancora sconsigliato."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Poche migliorie per questo livello di sicurezza, la principale è che ci "
-"sono\n"
-"più avvisi e controlli di sicurezza."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Questa è la sicurezza standard raccomandata per un computer da usare per\n"
-"connettersi a Internet come cliente. Ora ci sono controlli di sicurezza."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Con questo livello di sicurezza, l'uso di questo sistema come server "
-"diventa\n"
-"possibile. La sicurezza è ora abbastanza alta per consentire l'utilizzo\n"
-"del sistema come server che accetta connessioni da molti clienti."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Eredita le caratteristiche del livello 4, ma ora il sistema è completamente\n"
-"chiuso. Le funzioni di sicurezza sono al massimo."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "Sto settando il livello di sicurezza"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Scegli le opzioni per il server"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Sto settando il livello di sicurezza"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centro di Controllo"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Scegli l'utilità che vuoi usare"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uso: keyboarddrake [--expert] [tastiera]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Vuoi che il tasto BackSpace funzioni come Canc nella console?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Cambia il CD-ROM"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Per favore inserisci il Cd-Rom di installazione nel lettore e premi Ok "
-"quando\n"
-"pronto. Se non ce l'hai, premi Annulla per evitare l'aggiornamento diretto."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Non riesco ad avviare l'aggiornamento diretto !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "nessun serial_usb trovato\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Emula il terzo pulsante?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Configurazione del firewall!"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Configurazione del firewall!"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Hai già configurato un firewall.\n"
-"Clicca su Configura per modificare o rimuovere il firewall"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Clicca su Configura per configurare un firewall standard"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Scegli la tua lingua"
-
-# there is no room to put "Scegli classe d'installazione"
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Classe d'installazione"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Ricerca del disco fisso"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configura mouse"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Scegli la tua tastiera"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sicurezza"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Configura il filesystem"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatta partizioni"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Pacchetti da installare"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installa sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Aggiungi un utente"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configura rete"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configura servizi"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Crea disco di boot"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Installa bootloader"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configura X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Termina installazione"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Configuratore di firewall minimo\n"
-"\n"
-"Configurazione di un firewall personale per questo sistema Mandrake Linux.\n"
-"Per una soluzione firewall potente e dedicata, per favore rivolgiti\n"
-"alla distribuzione specializzata MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Adesso ti faremo domande riguardo i servizi che vuoi rendere disponibili\n"
-"durante la connessione a Internet. Rifletti bene prima di rispondere,\n"
-"perché la sicurezza del tuo computer è molto importante.\n"
-"\n"
-"Se attualmente non sfrutti qualcuno di questi servizi, ti invitiamo a\n"
-"disabilitarlo. Potrai cambiare queste impostazioni quando vorrai\n"
-"usando di nuovo questa applicazione!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Su questa macchina è in esecuzione un server web che deve essere visibile\n"
-"da Internet? Se si accede a tale server web soltanto da questa macchina\n"
-"puoi rispondere NO tranquillamente.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Su questa macchina è in esecuzione un server dei nomi? Se non ne hai\n"
-"configurato uno per trasmettere informazioni su IP e domini all'intera\n"
-"Internet, per favore rispondi NO.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Vuoi accettare delle connessioni Secure Shell (ssh) in ingresso? ssh\n"
-"può essere usato al posto di telnet per effettuare il login. Se adesso\n"
-"stai usando telnet, ti consigliamo di passare a ssh: telnet non effettua\n"
-"la cifratura dei dati, pertanto qualche pirata potrebbe intercettare\n"
-"la tua password. Invece ssh effettua la cifratura e non permette che\n"
-"qualcuno origli alle tue spalle."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Vuoi accettare delle connessioni telnet in ingresso?\n"
-"Come vi abbiamo spiegato prima, è un metodo terribilmente insicuro.\n"
-"Ti consigliamo caldamente di rispondere NO in questo caso, e di\n"
-"usare ssh invece di telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Su questa macchina è in esecuzione un server FTP che deve essere reso\n"
-"accessibile via Internet? In tal caso, ti consigliamo vivamente di\n"
-"usarlo soltanto per collegamenti di tipo Anonimo. Qualsiasi password\n"
-"inviata con FTP può essere intercettata da qualche cracker, dato che\n"
-"anche FTP non fa uso di cifratura nel trasmettere le password.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Su questa macchina è in esecuzione un server di posta elettronica? Se\n"
-"inviate messaggi per mezzo di pine, mutt o altri programmi di posta\n"
-"basati su interfaccia a caratteri, allora probabilmente sì. Altrimenti\n"
-"dovreste nasconderlo dietro il firewall.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Su questa macchina è in esecuzione un server POP o IMAP? Questi\n"
-"vengono usati per le necessità di utenti che hanno account di posta\n"
-"(non basata su interfaccia web) su questa macchina.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Apparentemente usi un kernel della serie 2.2. Se il tuo IP di\n"
-"rete è stabilito automaticamente da un computer connesso con\n"
-"questo (assegnazione dinamica), dobbiamo specificare questa\n"
-"impostazione. Il tuo indirizzo IP è assegnato dinamicamente?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"L'orologio di questo computer viene sincronizzato sulla base di\n"
-"un altro? Per lo più questo si verifica in organizzazioni che fanno\n"
-"uso di Unix/Linux di dimensioni medio-grandi, allo scopo di avere\n"
-"dei log di sistema sincronizzati e simili. Se non fai parte di una\n"
-"rete più grande e non hai mai sentito parlare di qualcosa del genere,\n"
-"probabilmente puoi rispondere NO."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Configurazione completa. Possiamo scrivere le modifiche su disco?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Non riesco ad aprire %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Non riesco ad aprire %s in scrittura: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Computer connesso alla rete (cliente)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Server NFS, server SMB, server proxy, server SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Workstation grafica con GNOME"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Utilità per il tuo Palm Pilot o Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Workstation"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Server di nomi di dominio (DNS) e informazioni sulla rete"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programmi Office: wordprocessor (kword, abiword), fogli elettronici "
-"(kspread, gnumeric), visualizzatori pdf, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Utilità audio: riproduttori mp3 o midi, mixer, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Libri e Howto su Linux e il software libero"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Workstation grafica con KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Set di utilità per posta, news, web, file transfer, e chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Database"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Server di database PostgreSQL o MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Strumenti per semplificare la configurazione del computer"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Suono"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Programmi di utilità"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentazione"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Programmi da linea di comando"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Server di posta Postfix, server di news Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Computer con accesso a Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Computer multimediale"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configurazione"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Altri desktop grafici (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Il K Desktop Environment, l'ambiente grafico di base con una collezione di "
-"utilità che lo accompagnano"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ambiente grafico"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Sviluppo"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache e Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Utilità per creare e masterizzare CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Postazione di lavoro con programmi Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programmi grafici come The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Librerie di sviluppo, programmi e file include per C e C++"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Server di rete"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Posta/Groupware/Newsgroup"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Computer predisposto per i giochi"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Riproduttori video e programmi di editing"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafica"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programmi di svago: azione, da tavolo, strategia, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Gruppo di programmi per leggere e inviare posta e news (pine, mutt, tin..) e "
-"per navigare il Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archiviazione, emulatori, monitoraggio"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanza Personale"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Un ambiente grafico con un set di applicazioni user-friendly e utilità per "
-"il desktop"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clienti per vari protocolli, incluso ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Gateway per Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programmi di riproduzione/modifica audio e video"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Altri desktop grafici"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editor, shell, programmi di utilità riguardo i file, terminali"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programmi per gestire le tue finanze, come gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Giochi"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Gestione di informazioni personali"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - Masterizzazione CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Workstation scientifica"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Vuoi far ripartire la rete?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Sei d'accordo?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Sto per riavviare l'interfaccia di rete:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Sto per riavviare l'interfaccia di rete %s. Sei d'accordo?"
-
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "A meno che tu non sia sicuro del contrario, la scelta usuale è \"/dev/hda"
-#~ "\"\n"
-#~ "(il disco IDE principale sul canale primario) o \"/dev/sda\" (il primo "
-#~ "disco SCSI)."
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Ci sono le seguenti code di stampa.\n"
-#~ "Puoi aggiungerne altre o cambiare quelle esistenti."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Tempo di connessione: "
-
-#~ msgid ""
-#~ "GNU/Linux is a multiuser system, and this means that each user can have "
-#~ "his\n"
-#~ "own preferences, his own files and so on. You can read the ``User "
-#~ "Guide''\n"
-#~ "to learn more. But unlike root, which is the administrator, the users "
-#~ "you\n"
-#~ "will add here will not be entitled to change anything except their own\n"
-#~ "files and their own configuration. You will have to create at least one\n"
-#~ "regular user for yourself. That account is where you should log in for\n"
-#~ "routine use. Although it is very practical to log in as root everyday, "
-#~ "it\n"
-#~ "may also be very dangerous! The slightest mistake could mean that your\n"
-#~ "system would not work any more. If you make a serious mistake as a "
-#~ "regular\n"
-#~ "user, you may only lose some information, but not the entire system.\n"
-#~ "\n"
-#~ "First, you have to enter your real name. This is not mandatory, of course "
-#~ "-\n"
-#~ "as you can actually enter whatever you want. DrakX will then take the "
-#~ "first\n"
-#~ "word you have entered in the box and will bring it over to the User "
-#~ "name.\n"
-#~ "This is the name this particular user will use to log into the system. "
-#~ "You\n"
-#~ "can change it. You then have to enter a password here. A non-privileged\n"
-#~ "(regular) user's password is not as crucial as that of root from a "
-#~ "security\n"
-#~ "point of view, but that is no reason to neglect it - after all, your "
-#~ "files\n"
-#~ "are at risk.\n"
-#~ "\n"
-#~ "If you click on Accept user, you can then add as many as you want. Add a\n"
-#~ "user for each one of your friends: your father or your sister, for "
-#~ "example.\n"
-#~ "When you finish adding all the users you want, select Done.\n"
-#~ "\n"
-#~ "Clicking the Advanced button allows you to change the default shell for\n"
-#~ "that user (bash by default)."
-#~ msgstr ""
-#~ "GNU/Linux è un sistema operativo multiutente, e questo significa che\n"
-#~ "ciascun utente può disporre di una configurazione personalizzata, di uno\n"
-#~ "spazio per i propri file, e così via; consultate il ``Manuale "
-#~ "dell'utente''\n"
-#~ "per saperne di più. Ma, a differenza di root, che è l'amministratore del\n"
-#~ "sistema, gli utenti che aggiungerete adesso non avranno il diritto di\n"
-#~ "cambiare nulla, se non i propri file e la propria configurazione. "
-#~ "Dovrete\n"
-#~ "crearne almeno uno per voi stessi, e dovreste usare quello per l'uso\n"
-#~ "quotidiano: per quanto sia molto comodo entrare nel sistema come root "
-#~ "tutti\n"
-#~ "i giorni, potrebbe anche essere molto pericoloso! Anche un errore banale\n"
-#~ "potrebbe significare un sistema non più in grado di funzionare\n"
-#~ "correttamente. Se, invece, commettete un errore, anche grave, in qualità "
-#~ "di\n"
-#~ "utente normale, potreste perdere parte dei vostri dati, ma non\n"
-#~ "compromettere l'intero sistema.\n"
-#~ "\n"
-#~ "Prima di tutto, inserite il vostro nome reale. Naturalmente questo non è\n"
-#~ "obbligatorio: potete digitare quello che volete. Fatto questo, DrakX\n"
-#~ "prenderà la prima parola che avete inserito nel campo di testo e la "
-#~ "copierà\n"
-#~ "alla voce Nome utente. Questo è il nome che userete per accedere al "
-#~ "sistema\n"
-#~ "(non temete, se non andasse bene potrete cambiarlo in un secondo "
-#~ "momento).\n"
-#~ "Adesso digitate una password per questo utente. La password di un utente\n"
-#~ "non privilegiato dal punto di vista della sicurezza non è cruciale come\n"
-#~ "quella di root, ovviamente, ma non c'è motivo di essere frettolosi: dopo\n"
-#~ "tutto, si tratta dei vostri file.\n"
-#~ "\n"
-#~ "Se cliccate su Accetta utente, potrete aggiungerne un altro, e altri\n"
-#~ "ancora, a vostra discrezione. Aggiungete un utente per ciascuno dei "
-#~ "vostri\n"
-#~ "amici, oppure per vostro padre e vostro fratello, ad esempio. Dopo aver\n"
-#~ "aggiunto tutti gli utenti che volete, selezionate Fatto.\n"
-#~ "\n"
-#~ "Cliccando sul pulsante Avanzato potrete cambiare la shell; per "
-#~ "quell'utente\n"
-#~ "(come opzione predefinita è bash)."
-
-#~ msgid ""
-#~ "It is now time to specify which programs you wish to install on your\n"
-#~ "system. There are thousands of packages available for Mandrake Linux, "
-#~ "and\n"
-#~ "you are not supposed to know them all by heart.\n"
-#~ "\n"
-#~ "If you are performing a standard installation from CDROM, you will first "
-#~ "be\n"
-#~ "asked to specify the CDs you currently have. Check the CD labels and\n"
-#~ "highlight the boxes corresponding to the CDs you have available for\n"
-#~ "installation. Click OK when you are ready to continue.\n"
-#~ "\n"
-#~ "Packages are sorted in groups corresponding to a particular use of your\n"
-#~ "machine. The groups themselves are sorted into four sections:\n"
-#~ "\n"
-#~ " * \"Workstation\": if you plant to use your machine as a workstation,\n"
-#~ "select one or more of the corresponding groups.\n"
-#~ "\n"
-#~ " * \"Graphical Environment\": this is where you will choose your "
-#~ "preferred\n"
-#~ "graphical environment. At least one must be selected if you want to have "
-#~ "a\n"
-#~ "graphical workstation!\n"
-#~ "\n"
-#~ " * \"Development\": if the machine is to be used for programming, choose "
-#~ "the\n"
-#~ "desired group(s).\n"
-#~ "\n"
-#~ " * \"Server\": finally, if the machine is intended to be a server, you "
-#~ "will\n"
-#~ "be able to select which of the most common services you wish to see\n"
-#~ "installed on the machine.\n"
-#~ "\n"
-#~ "Moving the mouse cursor over a group name will display a short "
-#~ "explanatory\n"
-#~ "text about that group.\n"
-#~ "\n"
-#~ "Clicking the Advanced button will allow you to select the \"Individual\n"
-#~ "package selection\" option. This is useful if you are familiar with the\n"
-#~ "packages being offered or if you want to have total control over what "
-#~ "will\n"
-#~ "be installed.\n"
-#~ "\n"
-#~ "If you started the installation in \"Update\" mode, you can unselect all\n"
-#~ "groups to avoid installing any new package. This is useful for repairing "
-#~ "or\n"
-#~ "updating an existing system."
-#~ msgstr ""
-#~ "Adesso è il momento di indicare i programmi che volete siano installati "
-#~ "sul\n"
-#~ "vostro sistema. Ci sono migliaia di programmi disponibili per Mandrake\n"
-#~ "Linux, e nessuno si aspetta che li conosciate tutti a memoria.\n"
-#~ "\n"
-#~ "Se state effettuando un'installazione standard da CDROM, per prima cosa "
-#~ "vi\n"
-#~ "verrà chiesto di specificare i CD in vostro possesso: controllate i CD\n"
-#~ "della distribuzione, cliccate sulle caselle corrispondenti ai CD di cui\n"
-#~ "disponete e infine sul pulsante OK quando sarete pronti per continuare.\n"
-#~ "\n"
-#~ "I pacchetti sono organizzati in gruppi corrispondenti a usi particolari\n"
-#~ "della vostra macchina. I gruppi stessi sono divisi in quattro sezioni:\n"
-#~ "\n"
-#~ " * \"Workstation\": scegliete uno o più dei gruppi di questa sezione se "
-#~ "la\n"
-#~ "vostra macchina verrà utilizzata prevalentemente come workstation.\n"
-#~ "\n"
-#~ " * \"Ambiente grafico\": scegliete qui il vostro ambiente grafico "
-#~ "preferito.\n"
-#~ "Indicatene almeno uno se desiderate avere una workstation grafica!\n"
-#~ "\n"
-#~ " * \"Sviluppo\": se la macchina verrà usata per lo sviluppo di software\n"
-#~ "scegliete i gruppi appropriati.\n"
-#~ "\n"
-#~ " * \"Server\": se la macchina verrà sfruttata come server, infine, qui\n"
-#~ "potrete scegliere i servizi più comuni che verranno installati.\n"
-#~ "\n"
-#~ "Spostando il puntatore del mouse sul nome di un gruppo verrà mostrato un\n"
-#~ "breve testo di informazioni riguardo quest'ultimo.\n"
-#~ "\n"
-#~ "Cliccando sul pulsante Avanzato potrete scegliere l'opzione \"Selezione\n"
-#~ "individuale dei pacchetti\". Questa è utilissima se conoscete bene i\n"
-#~ "pacchetti presenti nella distribuzione o se desiderate avere il totale\n"
-#~ "controllo di ciò che verrà installato.\n"
-#~ "\n"
-#~ "Se avete cominciato l'installazione in modalità ``Aggiornamento'', "
-#~ "potete\n"
-#~ "deselezionare tutti i gruppi per evitare di installare nuovi pacchetti, "
-#~ "in\n"
-#~ "questo modo effettuerete soltanto il recupero o l'aggiornamento del "
-#~ "sistema\n"
-#~ "esistente."
-
-#~ msgid ""
-#~ "Finally, depending on your choice of whether or not to select individual\n"
-#~ "packages, you will be presented a tree containing all packages "
-#~ "classified\n"
-#~ "by groups and subgroups. While browsing the tree, you can select entire\n"
-#~ "groups, subgroups, or individual packages.\n"
-#~ "\n"
-#~ "Whenever you select a package on the tree, a description appears on the\n"
-#~ "right. When your selection is finished, click the Install button which "
-#~ "will\n"
-#~ "then launch the installation process. Depending on the speed of your\n"
-#~ "hardware and the number of packages that need to be installed, it may "
-#~ "take\n"
-#~ "a while to complete the process. A time to complete estimate is "
-#~ "displayed\n"
-#~ "on the screen to help you gauge if there is sufficient time to enjoy a "
-#~ "cup\n"
-#~ "of coffee.\n"
-#~ "\n"
-#~ "!! If a server package has been selected either intentionally or because "
-#~ "it\n"
-#~ "was part of a whole group, you will be asked to confirm that you really\n"
-#~ "want those servers to be installed. Under Mandrake Linux, any installed\n"
-#~ "servers are started by default at boot time. Even if they are safe and "
-#~ "have\n"
-#~ "no known issues at the time the distribution was shipped, it may happen\n"
-#~ "that security holes are discovered after this version of Mandrake Linux "
-#~ "was\n"
-#~ "finalized. If you do not know what a particular service is supposed to "
-#~ "do\n"
-#~ "or why it is being installed, then click No. Clicking Yes will install "
-#~ "the\n"
-#~ "listed services and they will be started automatically by default. !!\n"
-#~ "\n"
-#~ "The \"Automatic dependencies\" option simply disables the warning dialog\n"
-#~ "which appears whenever the installer automatically selects a package. "
-#~ "This\n"
-#~ "occurs because it has determined that it needs to satisfy a dependency "
-#~ "with\n"
-#~ "another package in order to successfully complete the installation.\n"
-#~ "\n"
-#~ "The tiny floppy disc icon at the bottom of the list allows to load the\n"
-#~ "packages list chosen during a previous installation. Clicking on this "
-#~ "icon\n"
-#~ "will ask you to insert a floppy disk previously created at the end of\n"
-#~ "another installation. See the second tip of last step on how to create "
-#~ "such\n"
-#~ "a floppy."
-#~ msgstr ""
-#~ "Per finire, a seconda che abbiate scelto di indicare i pacchetti su base\n"
-#~ "individuale o meno, vi verrà mostrata una struttura ad albero contenente\n"
-#~ "tutti i pacchetti organizzati in gruppi e sotto-gruppi. Mentre sfogliate\n"
-#~ "questa lista gerarchica potrete selezionare interi gruppi, sotto-gruppi "
-#~ "o\n"
-#~ "singoli pacchetti.\n"
-#~ "\n"
-#~ "Quando selezionate un pacchetto all'interno dell'albero, compare una\n"
-#~ "descrizione dello stesso sulla destra. Una volta terminata la scelta,\n"
-#~ "cliccate sul pulsante Installa che provvederà a far partire "
-#~ "l'installazione\n"
-#~ "vera e propria. Il tempo necessario varia in base al numero di pacchetti\n"
-#~ "che devono essere installati e alla velocità del vostro hardware, "
-#~ "l'attesa\n"
-#~ "potrebbe anche essere lunga. Una stima del tempo richiesto per finire\n"
-#~ "l'installazione è visibile sullo schermo, in questo modo potrete sapere "
-#~ "se\n"
-#~ "avete tempo a sufficienza per godervi una tazza di caffé.\n"
-#~ "\n"
-#~ "!! Se avete selezionato un pacchetto che offre un servizio come server\n"
-#~ "(intenzionalmente, oppure perché faceva parte di un gruppo), vi verrà\n"
-#~ "chiesta conferma riguardo una sua effettiva installazione. Come opzione\n"
-#~ "predefinita, in Mandrake Linux tutti i servizi installati vengono "
-#~ "avviati\n"
-#~ "automaticamente al momento del boot. Anche se si tratta di servizi "
-#~ "sicuri\n"
-#~ "al momento in cui è stata rilasciata questa versione della "
-#~ "distribuzione,\n"
-#~ "potrebbe succedere che vengano scoperte delle falle di sicurezza in un\n"
-#~ "momento successivo. Se poi non avete proprio idea di quale sia la "
-#~ "funzione\n"
-#~ "di uno di questi pacchetti, cliccate sul pulsante No. Cliccando su Sì i\n"
-#~ "servizi elencati verranno installati e saranno attivati in maniera\n"
-#~ "automatica. !!\n"
-#~ "\n"
-#~ "L'opzione \"Dipendenze automatiche\" disabilita la finestra di dialogo "
-#~ "che\n"
-#~ "compare tutte le volte che il programma di installazione seleziona\n"
-#~ "automaticamente uno o più pacchetti. Il programma determina in modo\n"
-#~ "automatico, infatti, quali sono i pacchetti che sono indispensabili a un\n"
-#~ "dato pacchetto (``dipendenze'') perché quest'ultimo possa essere "
-#~ "installato\n"
-#~ "con successo.\n"
-#~ "\n"
-#~ "Il piccolo dischetto floppy in fondo alla lista vi permette di caricare "
-#~ "la\n"
-#~ "lista di pacchetti scelti durante una precedente installazione. "
-#~ "Cliccando\n"
-#~ "su questa icona vi verrà chiesto di inserire un floppy che avrete creato\n"
-#~ "alla fine di un'altra installazione. Consultate le informazioni che\n"
-#~ "riguardano l'ultimo passo del processo di installazione per sapere come\n"
-#~ "creare questo dischetto."
-
-#~ msgid ""
-#~ "X (for X Window System) is the heart of the GNU/Linux graphical "
-#~ "interface\n"
-#~ "on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-#~ "WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-#~ "will try to configure X automatically.\n"
-#~ "\n"
-#~ "It is extremely rare for it to fail, unless the hardware is very old (or\n"
-#~ "very new). If it succeeds, it will start X automatically with the best\n"
-#~ "resolution possible depending on the size of the monitor. A window will\n"
-#~ "then appear and ask you if you can see it.\n"
-#~ "\n"
-#~ "If you are doing an \"Expert\" install, you will enter the X "
-#~ "configuration\n"
-#~ "wizard. See the corresponding section of the manual for more information\n"
-#~ "about this wizard.\n"
-#~ "\n"
-#~ "If you can see the message and answer Yes, then DrakX will proceed to "
-#~ "the\n"
-#~ "next step. If you cannot see the message, it simply means that the\n"
-#~ "configuration was wrong and the test will automatically end after 10\n"
-#~ "seconds, restoring the screen."
-#~ msgstr ""
-#~ "X (per X-Window) è il cuore dell'interfaccia grafica di GNU/Linux, sulla\n"
-#~ "quale sono basati tutti gli ambienti grafici che sono inclusi in "
-#~ "Mandrake\n"
-#~ "Linux (KDE, GNOME, Afterstep, Windowmaker...). In questa sezione, DrakX\n"
-#~ "tenterà di configurare X automaticamente.\n"
-#~ "\n"
-#~ "È molto raro che non abbia successo: l'unico motivo per cui ciò potrebbe\n"
-#~ "accadere è che l'hardware in questione è molto vecchio (o molto "
-#~ "recente).\n"
-#~ "Se l'operazione riesce, DrakX lancerà X automaticamente, con la miglior\n"
-#~ "risoluzione possibile, in base alle dimensioni del monitor. A quel "
-#~ "punto,\n"
-#~ "comparirà una finestra che vi chiederà se potete vederla.\n"
-#~ "\n"
-#~ "Se state effettuando un'installazione in modo Esperto, verrà lanciato\n"
-#~ "l'assistente di configurazione di X. Consultate la sezione del manuale\n"
-#~ "dedicata a questo assistente per avere più informazioni al riguardo.\n"
-#~ "\n"
-#~ "Se potete vedere il messaggio e rispondete Sì, allora DrakX passerà alla\n"
-#~ "fase successiva. Se non potete vedere il messaggio, significa che la\n"
-#~ "configurazione non andava bene, e il test terminerà automaticamente dopo "
-#~ "10\n"
-#~ "secondi, riportandovi alla schermata precedente."
-
-#~ msgid ""
-#~ "The first time you try the X configuration, you may not be very "
-#~ "satisfied\n"
-#~ "with its display (screen is too small, shifted left or right...). Hence,\n"
-#~ "even if X starts up correctly, DrakX then asks you if the configuration\n"
-#~ "suits you. It will also propose to change it by displaying a list of "
-#~ "valid\n"
-#~ "modes it could find, asking you to select one.\n"
-#~ "\n"
-#~ "As a last resort, if you still cannot get X to work, choose Change "
-#~ "graphics\n"
-#~ "card, select Unlisted card, and when prompted on which server you want,\n"
-#~ "choose FBDev. This is a failsafe option which works with any modern\n"
-#~ "graphics card. Then choose Test again to be sure."
-#~ msgstr ""
-#~ "Può verificarsi il caso che il primo tentativo non sia quello giusto (lo\n"
-#~ "schermo è troppo piccolo, spostato a destra o a sinistra...). Questo è "
-#~ "il\n"
-#~ "motivo per cui, anche se X viene lanciato correttamente, DrakX vi "
-#~ "chiederà\n"
-#~ "subito dopo se la configurazione va bene, e vi proporrà di cambiarla\n"
-#~ "elencando una lista di modi video validi (in base a quello che ha potuto\n"
-#~ "accertare) chiedendovi di sceglierne uno.\n"
-#~ "\n"
-#~ "Come ultima risorsa, se proprio non riuscite a far funzionare X, "
-#~ "scegliete\n"
-#~ "Cambia scheda grafica, selezionate Unlisted card, e quando vi verrà "
-#~ "chiesto\n"
-#~ "quale server desiderate utilizzare, scegliete FBDev: si tratta di\n"
-#~ "un'opzione a prova d'errore, che funziona con qualsiasi scheda grafica\n"
-#~ "moderna. Quindi scegliete Nuovo test per essere sicuri."
-
-#~ msgid ""
-#~ "Finally, you will be asked whether you want to see the graphical "
-#~ "interface\n"
-#~ "at boot. Note this question will be asked even if you chose not to test "
-#~ "the\n"
-#~ "configuration. Obviously, you want to answer No if your machine is to "
-#~ "act\n"
-#~ "as a server, or if you were not successful in getting the display\n"
-#~ "configured."
-#~ msgstr ""
-#~ "Infine DrakX vi chiederà se desiderate utilizzare l'interfaccia grafica "
-#~ "una\n"
-#~ "volta terminato il processo di avvio del sistema. Notate che questa "
-#~ "domanda\n"
-#~ "verrà fatta anche se avete deciso di non provare la configurazione. La\n"
-#~ "scelta più ovvia è No se la vostra macchina dovrà svolgere il ruolo di\n"
-#~ "server, o se non siete riusciti a ottenere una configurazione corretta."
-
-#~ msgid ""
-#~ "At this point you need to choose where on your hard drive to install "
-#~ "your\n"
-#~ "Mandrake Linux operating system. If your hard drive is empty or if an\n"
-#~ "existing operating system is using all the space available, you will "
-#~ "need\n"
-#~ "to partition it. Basically, partitioning a hard drive consists of "
-#~ "logically\n"
-#~ "dividing it to create space to install your new Mandrake Linux system.\n"
-#~ "\n"
-#~ "Because the effects of the partitioning process are usually "
-#~ "irreversible,\n"
-#~ "partitioning can be intimidating and stressful if you are an "
-#~ "inexperienced\n"
-#~ "user. Fortunately, there is a wizard which simplifies this process. "
-#~ "Before\n"
-#~ "beginning, please consult the manual and take your time.\n"
-#~ "\n"
-#~ "If you are running the install in Expert mode, you will enter DiskDrake,\n"
-#~ "the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-#~ "partitions. See the DiskDrake chapter of the manual. From the "
-#~ "installation\n"
-#~ "interface, you can use the wizards as described here by clicking the "
-#~ "Wizard\n"
-#~ "button of the dialog.\n"
-#~ "\n"
-#~ "If partitions have already been defined, either from a previous\n"
-#~ "installation or from another partitioning tool, simply select those to\n"
-#~ "install your Linux system.\n"
-#~ "\n"
-#~ "If partitions are not defined, you will need to create them using the\n"
-#~ "wizard. Depending on your hard drive configuration, several options are\n"
-#~ "available:\n"
-#~ "\n"
-#~ " * Use free space: this option will simply lead to an automatic "
-#~ "partitioning\n"
-#~ "of your blank drive(s). You will not be prompted further.\n"
-#~ "\n"
-#~ " * Use existing partition: the wizard has detected one or more existing\n"
-#~ "Linux partitions on your hard drive. If you want to use them, choose "
-#~ "this\n"
-#~ "option.\n"
-#~ "\n"
-#~ " * Use the free space on the Windows partition: if Microsoft Windows is\n"
-#~ "installed on your hard drive and takes all the space available on it, "
-#~ "you\n"
-#~ "have to create free space for Linux data. To do that, you can delete "
-#~ "your\n"
-#~ "Microsoft Windows partition and data (see \"Erase entire disk\" or "
-#~ "\"Expert\n"
-#~ "mode\" solutions) or resize your Microsoft Windows partition. Resizing "
-#~ "can\n"
-#~ "be performed without the loss of any data. This solution is recommended "
-#~ "if\n"
-#~ "you want to use both Mandrake Linux and Microsoft Windows on same "
-#~ "computer.\n"
-#~ "\n"
-#~ "   Before choosing this option, please understand that after this "
-#~ "procedure,\n"
-#~ "the size of your Microsoft Windows partition will be smaller than at the\n"
-#~ "present time. You will have less free space under Microsoft Windows to\n"
-#~ "store your data or to install new software.\n"
-#~ "\n"
-#~ " * Erase entire disk: if you want to delete all data and all partitions\n"
-#~ "present on your hard drive and replace them with your new Mandrake Linux\n"
-#~ "system, choose this option. Be careful with this solution because you "
-#~ "will\n"
-#~ "not be able to revert your choice after confirmation.\n"
-#~ "\n"
-#~ "   !! If you choose this option, all data on your disk will be lost. !!\n"
-#~ "\n"
-#~ " * Remove Windows: this will simply erase everything on the drive and "
-#~ "begin\n"
-#~ "fresh, partitioning everything from scratch. All data on your disk will "
-#~ "be\n"
-#~ "lost.\n"
-#~ "\n"
-#~ "   !! If you choose this option, all data on your disk will be lost. !!\n"
-#~ "\n"
-#~ " * Expert mode: choose this option if you want to manually partition "
-#~ "your\n"
-#~ "hard drive. Be careful - it is a powerful but dangerous choice. You can\n"
-#~ "very easily lose all your data. Hence, do not choose this unless you "
-#~ "know\n"
-#~ "what you are doing."
-#~ msgstr ""
-#~ "A questo punto dovete scegliere dove installare il vostro sistema "
-#~ "operativo\n"
-#~ "Mandrake Linux sul disco rigido. Se il vostro disco è vuoto, oppure se "
-#~ "un\n"
-#~ "sistema operativo esistente sta usando tutto lo spazio disponibile, "
-#~ "allora\n"
-#~ "dovrete partizionarlo. In breve, partizionare un disco rigido consiste "
-#~ "nel\n"
-#~ "suddividerlo logicamente in maniera da creare lo spazio sufficiente per\n"
-#~ "installare il vostro nuovo sistema operativo Mandrake Linux.\n"
-#~ "\n"
-#~ "Dato che gli effetti del partizionamento sono di solito irreversibili,\n"
-#~ "questa operazione può intimidire e rivelarsi stressante per un utente\n"
-#~ "inesperto. Fortunatamente, avete a vostra disposizione un assistente che\n"
-#~ "semplifica questo passo. Prima di iniziare per favore consultate il\n"
-#~ "manuale, e prendete tutto il tempo che vi serve.\n"
-#~ "\n"
-#~ "Se state effettuando l'installazione in modalità Esperto, verrà lanciato "
-#~ "il\n"
-#~ "programma di gestione e partizionamento dei dischi rigidi di Mandrake\n"
-#~ "Linux, che vi permetterà di configurare accuratamente le vostre "
-#~ "partizioni.\n"
-#~ "Consultate il capitolo relativo a Diskdrake di questo manuale. Potete "
-#~ "usare\n"
-#~ "gli assistenti descritti qui di seguito cliccando sul pulsante "
-#~ "Assistente.\n"
-#~ "\n"
-#~ "Se le partizioni sono già stata definite (per una precedente "
-#~ "installazione,\n"
-#~ "o da un'altra utilità di partizionamento), dovete solo scegliere \n"
-#~ "\"\n"
-#~ "quelle da usare per installare il vostro sistema Linux.\n"
-#~ "\n"
-#~ "Se le partizioni non sono ancora state definite, dovete crearle usando\n"
-#~ "l'assistente. In base alla configurazione del vostro disco rigido, "
-#~ "saranno\n"
-#~ "disponibili diverse soluzioni:\n"
-#~ "\n"
-#~ " * Usa spazio disponibile: questa opzione causerà un partizionamento\n"
-#~ "automatico del vostro disco rigido (o dischi, se ne avete più di uno). "
-#~ "Non\n"
-#~ "vi verrà posta nessun'altra domanda.\n"
-#~ "\n"
-#~ " * Usa partizioni esistenti: l'assistente ha trovato una o più "
-#~ "partizioni\n"
-#~ "Linux sul vostro disco rigido. Se desiderate usarle scegliete questa\n"
-#~ "opzione.\n"
-#~ "\n"
-#~ " * Usa lo spazio libero nella partizione Windows: se Microsoft Windows è\n"
-#~ "installato sul vostro disco rigido e occupa tutto lo spazio disponibile,\n"
-#~ "dovete creare spazio libero per i dati relativi a Linux. Per farlo "
-#~ "potete\n"
-#~ "cancellare la vostra partizione Microsoft Windows e i dati che contiene\n"
-#~ "(come spiegato in \"Cancella l'intero disco\" o \"Modo Esperto\"), "
-#~ "oppure\n"
-#~ "ridimensionare la vostra partizione Microsoft Windows. Il "
-#~ "ridimensionamento\n"
-#~ "può essere effettuato evitando la perdita di dati. Questa è la soluzione\n"
-#~ "raccomandata se desiderate usare sia Mandrake Linux sia Microsoft "
-#~ "Windows\n"
-#~ "sullo stesso computer.\n"
-#~ "\n"
-#~ "   Prima di scegliere questa soluzione, per favore rendetevi conto del "
-#~ "fatto\n"
-#~ "che la dimensione della partizione Microsoft Windows sarà inferiore\n"
-#~ "rispetto a quella attuale. Significa che avrete meno spazio libero sotto\n"
-#~ "Microsoft Windows per archiviare i vostri dati o installare nuovo "
-#~ "software.\n"
-#~ "\n"
-#~ " * Cancella l'intero disco: se desiderate cancellare tutti i dati e tutte "
-#~ "le\n"
-#~ "partizioni presenti sul vostro disco rigido e rimpiazzarli con il vostro\n"
-#~ "nuovo sistema Mandrake Linux, potete selezionare questa opzione. Fate\n"
-#~ "attenzione nello scegliere questa soluzione, dopo la conferma non "
-#~ "potrete\n"
-#~ "tornare indietro.\n"
-#~ "\n"
-#~ "   !! Se scegliete questa opzione, tutti i dati sul vostro disco "
-#~ "andranno\n"
-#~ "persi. !!\n"
-#~ "\n"
-#~ " * Cancella Windows: l'effetto di questa opzione sarà di cancellare "
-#~ "tutto\n"
-#~ "quello che si trova sul disco e di ricominciare da capo, creando le\n"
-#~ "partizioni su un disco vuoto. Tutti i dati presenti sul vostro disco\n"
-#~ "andranno persi.\n"
-#~ "\n"
-#~ "   !! Se scegliete questa opzione, tutti i dati sul vostro disco "
-#~ "andranno\n"
-#~ "persi. !!\n"
-#~ "\n"
-#~ " * Modo Esperto: se volete partizionare manualmente il vostro disco "
-#~ "rigido\n"
-#~ "potete scegliere questa opzione. Fate attenzione prima di optare questa\n"
-#~ "soluzione: è potente, ma molto pericolosa. Potreste facilmente causare "
-#~ "la\n"
-#~ "perdita di tutti i vostri dati. Quindi, non scegliete questa soluzione "
-#~ "se\n"
-#~ "non sapete cosa state facendo."
-
-#~ msgid ""
-#~ "There you are. Installation is now complete and your GNU/Linux system is\n"
-#~ "ready to use. Just click OK to reboot the system. You can start GNU/"
-#~ "Linux\n"
-#~ "or Windows, whichever you prefer (if you are dual-booting), as soon as "
-#~ "the\n"
-#~ "computer has booted up again.\n"
-#~ "\n"
-#~ "The Advanced button shows two more buttons to:\n"
-#~ "\n"
-#~ " * generate auto-install floppy: to create an installation floppy disk "
-#~ "which\n"
-#~ "will automatically perform a whole installation without the help of an\n"
-#~ "operator, similar to the installation you just configured.\n"
-#~ "\n"
-#~ "   Note that two different options are available after clicking the "
-#~ "button:\n"
-#~ "\n"
-#~ "    * Replay. This is a partially automated install as the partitioning "
-#~ "step\n"
-#~ "(and only this one) remains interactive.\n"
-#~ "\n"
-#~ "    * Automated. Fully automated install: the hard disk is completely\n"
-#~ "rewritten, all data is lost.\n"
-#~ "\n"
-#~ "   This feature is very handy when installing a great number of similar\n"
-#~ "machines. See the Auto install section at our web site.\n"
-#~ "\n"
-#~ " * Save packages selection(*): saves the packages selection as made\n"
-#~ "previously. Then, when doing another installation, insert the floppy "
-#~ "inside\n"
-#~ "the driver and run the installation going to the help screen by pressing "
-#~ "on\n"
-#~ "the F1 key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-#~ "\n"
-#~ "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-#~ "\"mformat a:\")"
-#~ msgstr ""
-#~ "Ecco fatto: l'installazione è terminata, e il vostro sistema GNU/Linux è\n"
-#~ "pronto per essere usato. Dovete soltanto cliccare sul pulsante OK per\n"
-#~ "riavviare il sistema. Potete lanciare GNU/Linux o Windows (se presente),\n"
-#~ "qualunque preferiate dei due, non appena il computer avrà terminato di\n"
-#~ "effettuare il boot.\n"
-#~ "\n"
-#~ "Cliccando sul pulsante Avanzato avrete altri due pulsanti a vostra\n"
-#~ "disposizione:\n"
-#~ "\n"
-#~ " * Crea il floppy di auto installazione: per creare un floppy di\n"
-#~ "installazione che permette di eseguire automaticamente un' installazione\n"
-#~ "completa, del tutto simile a quella che avete appena finito di "
-#~ "configurare,\n"
-#~ "senza che sia necessario l'intervento di un operatore.\n"
-#~ "\n"
-#~ "   Notate che, dopo aver cliccato sul pulsante, saranno disponibili due\n"
-#~ "opzioni diverse:\n"
-#~ "\n"
-#~ "    * Ripeti: questa è un'installazione automatizzata solo in parte, in "
-#~ "quanto\n"
-#~ "la fase di partizionamento del disco (e solo quella) resta interattiva.\n"
-#~ "\n"
-#~ "    * Automatizzata: l'installazione è completamente automatizzata: il "
-#~ "disco\n"
-#~ "rigido viene riscritto per intero, tutti i dati andranno persi.\n"
-#~ "\n"
-#~ "   Questa caratteristica è molto utile quando si deve installare il "
-#~ "sistema su\n"
-#~ "un gran numero di macchine dalle caratteristiche simili. Si veda la "
-#~ "sezione\n"
-#~ "Installazione automatica sul nostro sito web.\n"
-#~ "\n"
-#~ " * Salva scelta pacchetti(*): salva la selezione dei pacchetti effettuata "
-#~ "in\n"
-#~ "precedenza. Al momento di effettuare un'altra installazione, potrete\n"
-#~ "inserire il dischetto nel lettore e installare il sistema richiamando lo\n"
-#~ "schermo di aiuto (premendo F1) e digitando >>linux defcfg=\"floppy\"<<.\n"
-#~ "\n"
-#~ "(*) Sarà necessario un dischetto formattato con il filesystem FAT: per\n"
-#~ "formattarne uno sotto GNU/Linux digitate \"mformat a:\""
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for use\n"
-#~ "(formatting means creating a file system).\n"
-#~ "\n"
-#~ "At this time, you may wish to reformat some already existing partitions "
-#~ "to\n"
-#~ "erase any data they contain. If you wish to do that, please select those\n"
-#~ "partitions as well.\n"
-#~ "\n"
-#~ "Please note that it is not necessary to reformat all pre-existing\n"
-#~ "partitions. You must reformat the partitions containing the operating\n"
-#~ "system (such as /, /usr or /var) but you do not have to reformat "
-#~ "partitions\n"
-#~ "containing data that you wish to keep (typically /home).\n"
-#~ "\n"
-#~ "Please be careful when selecting partitions. After formatting, all data "
-#~ "on\n"
-#~ "the selected partitions will be deleted and you will not be able to "
-#~ "recover\n"
-#~ "any of them.\n"
-#~ "\n"
-#~ "Click on OK when you are ready to format partitions.\n"
-#~ "\n"
-#~ "Click on Cancel if you want to choose another partition for your new\n"
-#~ "Mandrake Linux operating system installation.\n"
-#~ "\n"
-#~ "Click on Advanced if you wish to select partitions that will be checked "
-#~ "for\n"
-#~ "bad blocks on the disc."
-#~ msgstr ""
-#~ "Qualsiasi partizione appena definita deve essere formattata prima di "
-#~ "poter\n"
-#~ "essere usata (formattare significa creare un filesystem).\n"
-#~ "\n"
-#~ "A questo punto, potreste voler riformattare alcune partizioni "
-#~ "preesistenti\n"
-#~ "per cancellare i dati che contengono. Se desiderate farlo, per favore\n"
-#~ "scegliete le partizioni che intendete formattare.\n"
-#~ "\n"
-#~ "Per favore notate che non è necessario riformattare tutte le partizioni\n"
-#~ "preesistenti. Dovete riformattare le partizioni che contengono il "
-#~ "sistema\n"
-#~ "operativo (come /, /usr o /var), ma potete non riformattare partizioni "
-#~ "che\n"
-#~ "contengono dati che desiderate conservare (tipicamente /home).\n"
-#~ "\n"
-#~ "Per favore fate attenzione nella scelta delle partizioni, dopo la\n"
-#~ "formattazione tutti i dati saranno cancellati e non potrete recuperarli.\n"
-#~ "\n"
-#~ "Cliccate su OK quando sarete pronti a formattare le partizioni.\n"
-#~ "\n"
-#~ "Cliccate su Annulla se desiderate scegliere altre partizioni sulle quali\n"
-#~ "installare il vostro nuovo sistema operativo Mandrake Linux.\n"
-#~ "\n"
-#~ "Cliccate su Avanzato se desiderate che le partizioni selezionate vengano\n"
-#~ "controllate per accertare la presenza di eventuali blocchi rovinati."
-
-#~ msgid ""
-#~ "Before continuing you should read carefully the terms of the license. It\n"
-#~ "covers the whole Mandrake Linux distribution, and if you do not agree "
-#~ "with\n"
-#~ "all the terms in it, click on the Refuse button which will immediately\n"
-#~ "terminate the installation. To continue with the installation, click the\n"
-#~ "Accept button."
-#~ msgstr ""
-#~ "Prima di proseguire dovreste leggere con attenzione le condizioni d'uso:\n"
-#~ "queste riguardano l'intera distribuzione Mandrake Linux, e se non siete\n"
-#~ "d'accordo con qualche punto della licenza cliccate sul pulsante Rifiuto.\n"
-#~ "Questo interromperà immediatamente il processo di installazione. Per\n"
-#~ "proseguire con l'installazione, cliccate sul pulsante Accetto."
-
-#~ msgid ""
-#~ "Normally, DrakX selects the right keyboard for you (depending on the\n"
-#~ "language you have chosen) and you will not even see this step. However, "
-#~ "you\n"
-#~ "might not have a keyboard that corresponds exactly to your language: for\n"
-#~ "example, if you are an English speaking Swiss person, you may still want\n"
-#~ "your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-#~ "located in Quebec, you may find yourself in the same situation. In both\n"
-#~ "cases, you will have to go back to this installation step and select an\n"
-#~ "appropriate keyboard from the list.\n"
-#~ "\n"
-#~ "Click on the More button to be presented with the complete list of\n"
-#~ "supported keyboards."
-#~ msgstr ""
-#~ "Anche in questo caso DrakX avrà individuato la tastiera corretta (in "
-#~ "base\n"
-#~ "alla lingua che avete scelto) e voi non avrete nemmeno visto questo "
-#~ "punto\n"
-#~ "dell'installazione. Tuttavia, potreste avere una tastiera che non\n"
-#~ "corrisponde esattamente alla vostra lingua: se siete un francese che "
-#~ "parla\n"
-#~ "italiano, ad esempio, potreste avere bisogno di una tastiera francese.\n"
-#~ "Oppure, se parlate italiano ma vivete nel Québec, vi troverete nella "
-#~ "stessa\n"
-#~ "situazione. In entrambi i casi, dovrete tornare a questa fase\n"
-#~ "dell'installazione e selezionare una tastiera dalla lista.\n"
-#~ "\n"
-#~ "Cliccate sul pulsante Avanzato per avere una lista completa delle "
-#~ "tastiere\n"
-#~ "supportate."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage.\n"
-#~ "\n"
-#~ "Clicking on the Advanced button will allow you to select other languages "
-#~ "to\n"
-#~ "be installed on your workstation. Selecting other languages will install\n"
-#~ "the language-specific files for system documentation and applications. "
-#~ "For\n"
-#~ "example, if you will host users from Spain on your machine, select "
-#~ "English\n"
-#~ "as the main language in the tree view and in the Advanced section click "
-#~ "on\n"
-#~ "the grey star corresponding to \"Spanish|Spain\".\n"
-#~ "\n"
-#~ "Note that multiple languages may be installed. Once you have selected "
-#~ "any\n"
-#~ "additional locales click the OK button to continue."
-#~ msgstr ""
-#~ "Per favore scegliete la lingua che intendete usare per l'installazione e\n"
-#~ "l'uso del sistema.\n"
-#~ "\n"
-#~ "Cliccando sul pulsante Avanzato potrete scegliere altre lingue da\n"
-#~ "installare sul vostro computer. La selezione di altre lingue comporta\n"
-#~ "l'installazione dei file relativi alla documentazione e alle "
-#~ "applicazioni\n"
-#~ "per ciascuna di esse. Se il vostro computer, ad esempio, verrà usato da\n"
-#~ "persone di madre lingua spagnola, potete scegliere l'italiano come "
-#~ "lingua\n"
-#~ "principale nella struttura ad albero e, nella sezione Avanzato, apporre "
-#~ "un\n"
-#~ "segno di spunta sul pulsante grigio corrispondente a \"Spanish|Spain\".\n"
-#~ "\n"
-#~ "Notate che è possibile installare file relativi a più lingue. Dopo aver\n"
-#~ "scelto quelle che preferite cliccate sul pulsante OK per continuare."
-
-#~ msgid ""
-#~ "This is the most crucial decision point for the security of your GNU/"
-#~ "Linux\n"
-#~ "system: you have to enter the root password. root is the system\n"
-#~ "administrator and is the only one authorized to make updates, add users,\n"
-#~ "change the overall system configuration, and so on. In short, root can "
-#~ "do\n"
-#~ "everything! That is why you must choose a password that is difficult to\n"
-#~ "guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-#~ "choose not to enter a password, but we strongly advise you against this "
-#~ "if\n"
-#~ "only for one reason: do not think that because you booted GNU/Linux that\n"
-#~ "your other operating systems are safe from mistakes. Since root can\n"
-#~ "overcome all limitations and unintentionally erase all data on "
-#~ "partitions\n"
-#~ "by carelessly accessing the partitions themselves, it is important for "
-#~ "it\n"
-#~ "to be difficult to become root.\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. Never write down the root password - it makes it too "
-#~ "easy\n"
-#~ "to compromise a system.\n"
-#~ "\n"
-#~ "However, please do not make the password too long or complicated because\n"
-#~ "you must be able to remember it without too much effort.\n"
-#~ "\n"
-#~ "The password will not be displayed on screen as you type it in. Hence, "
-#~ "you\n"
-#~ "will have to type the password twice to reduce the chance of a typing\n"
-#~ "error. If you do happen to make the same typing error twice, this\n"
-#~ "\"incorrect\" password will have to be used the first time you connect.\n"
-#~ "\n"
-#~ "In expert mode, you will be asked if you will be connecting to an\n"
-#~ "authentication server, like NIS or LDAP.\n"
-#~ "\n"
-#~ "If your network uses LDAP (or NIS) protocol for authentication, select "
-#~ "LDAP\n"
-#~ "(or NIS) as authentication. If you do not know, ask your network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you will\n"
-#~ "want to choose Local files for authentication."
-#~ msgstr ""
-#~ "Questo è il punto più critico per la sicurezza del vostro sistema\n"
-#~ "GNU/Linux: state per decidere la password di root. root è "
-#~ "l'amministratore\n"
-#~ "del sistema, ed è l'unico utente autorizzato a compiere aggiornamenti,\n"
-#~ "aggiungere altri utenti, cambiare la configurazione globale del sistema,\n"
-#~ "etc. In breve, può fare tutto ciò che vuole! Questo è il motivo per cui\n"
-#~ "dovete scegliere una password che sia difficile da indovinare: DrakX vi\n"
-#~ "dirà se è troppo facile. Come si può vedere, potete scegliere di non\n"
-#~ "digitare una password, ma noi vi consigliamo caldamente di farlo. A "
-#~ "parte\n"
-#~ "ogni altro motivo, considerate questo fatto: non pensate che, poiché "
-#~ "avete\n"
-#~ "effettuato il boot con GNU/Linux, gli altri sistemi operativi che "
-#~ "convivono\n"
-#~ "con esso sulla stessa macchina siano al sicuro da errori. Al contrario:\n"
-#~ "root può scavalcare ogni limitazione e (involontariamente) cancellare "
-#~ "tutti\n"
-#~ "i dati presenti sulle partizioni accedendo in maniera scorretta a queste\n"
-#~ "ultime! Quindi è molto importante che sia difficile per gli utenti "
-#~ "normali\n"
-#~ "diventare root.\n"
-#~ "\n"
-#~ "La password ideale è costituita da un insieme di caratteri alfanumerici\n"
-#~ "lungo almeno 8 caratteri. Non scrivete mai su qualche appunto la "
-#~ "password\n"
-#~ "di root, renderebbe troppo facile accedere al sistema.\n"
-#~ "\n"
-#~ "Prestate attenzione, tuttavia, a non scegliere una password troppo lunga "
-#~ "o\n"
-#~ "complicata, perché dovete essere in grado di ricordarla senza troppo\n"
-#~ "sforzo.\n"
-#~ "\n"
-#~ "La password non verrà mostrata mentre la digitate. Per questo motivo è\n"
-#~ "necessario che venga inserita due volte, per ridurre il rischio di un\n"
-#~ "errore di battitura. Se per caso commettete lo stesso errore due volte,\n"
-#~ "questa password \"scorretta\" sarà quella che verrà richiesta la prima\n"
-#~ "volta che vi connetterete al sistema.\n"
-#~ "\n"
-#~ "In modo esperto vi verrà chiesto se il vostro computer è connesso a un\n"
-#~ "server di autenticazione, secondo il protocollo NIS o LDAP.\n"
-#~ "\n"
-#~ "Se la vostra rete si basa sul protocollo LDAP (o NIS) per "
-#~ "l'autenticazione,\n"
-#~ "selezionate il pulsante LDAP (o NIS) per effettuare l'autenticazione. Se\n"
-#~ "non siete sicuri, chiedete al vostro amministratore di rete.\n"
-#~ "\n"
-#~ "Se il vostro computer non è connesso a una rete soggetta ad "
-#~ "autenticazione,\n"
-#~ "scegliete File locali."
-
-#~ msgid ""
-#~ "DrakX is now detecting any IDE devices present in your computer. It will\n"
-#~ "also scan for one or more PCI SCSI card(s) on your system. If a SCSI "
-#~ "card\n"
-#~ "is found DrakX will automatically install the appropriate driver.\n"
-#~ "\n"
-#~ "Because hardware detection will sometimes not detect a piece of hardware\n"
-#~ "DrakX will ask you to confirm if a PCI SCSI card is present. Click Yes "
-#~ "if\n"
-#~ "you know that there is a SCSI card installed in your machine. You will "
-#~ "be\n"
-#~ "presented a list of SCSI cards to choose from. Click No if you have no "
-#~ "SCSI\n"
-#~ "hardware. If you are unsure you can check the list of hardware detected "
-#~ "in\n"
-#~ "your machine by selecting \"See hardware info\" and clicking OK. Examine\n"
-#~ "the list of hardware and then click on the OK button to return to the "
-#~ "SCSI\n"
-#~ "interface question.\n"
-#~ "\n"
-#~ "If you have to manually specify your adapter, DrakX will ask if you want "
-#~ "to\n"
-#~ "specify options for it. You should allow DrakX to probe the hardware for\n"
-#~ "the card-specific options that the hardware needs to initialize. This\n"
-#~ "usually works well.\n"
-#~ "\n"
-#~ "If DrakX is not able to probe for the options that need to be passed, "
-#~ "you\n"
-#~ "will need to manually provide options to the driver. Please review the\n"
-#~ "``User Guide'' (chapter 3, section \"Collecting information on your\n"
-#~ "hardware\") for hints on retrieving the parameters required from "
-#~ "hardware\n"
-#~ "documentation, from the manufacturer's web site (if you have Internet\n"
-#~ "access) or from Microsoft Windows (if you used this hardware with "
-#~ "Windows\n"
-#~ "on your system)."
-#~ msgstr ""
-#~ "A questo punto, DrakX proseguirà con il rilevamento di tutti i dischi\n"
-#~ "rigidi e altri dispositivi IDE presenti sul vostro computer. Cercherà "
-#~ "anche\n"
-#~ "di stabilire se sul vostro sistema è presente una o più schede SCSI di "
-#~ "tipo\n"
-#~ "PCI. Se verrà individuato un dispositivo di questo tipo, DrakX "
-#~ "installerà\n"
-#~ "automaticamente il driver relativo.\n"
-#~ "\n"
-#~ "Dato che il riconoscimento automatico in alcuni casi potrebbe non "
-#~ "riuscire\n"
-#~ "a individuare un dispositivo hardware, vi verrà comunque chiesto se "
-#~ "avete\n"
-#~ "una scheda SCSI PCI o no. Cliccate su Sì se siete sicuri che nel vostro\n"
-#~ "computer è presente una scheda SCSI: potrete scegliere la vostra scheda "
-#~ "da\n"
-#~ "una lista. Cliccate su No se non disponete di nessun tipo di hardware "
-#~ "SCSI.\n"
-#~ "Se non siete sicuri, potete anche controllare la lista dell'hardware\n"
-#~ "rilevato nella vostra macchina selezionando \"Vedi informazioni hardware"
-#~ "\"\n"
-#~ "e cliccando su OK. Controllate la lista relativa all'hardware individuato "
-#~ "e\n"
-#~ "poi cliccate sul pulsante OK per ritornare alla domanda relativa alla\n"
-#~ "scheda SCSI.\n"
-#~ "\n"
-#~ "Se sarete costretti a specificare manualmente il tipo di adattatore in\n"
-#~ "vostro possesso, DrakX vi chiederà se intendete indicare delle opzioni\n"
-#~ "relative ad esso. Vi consigliamo di permettere a DrakX di interrogare\n"
-#~ "l'hardware per stabilire le opzioni specifiche per quella scheda che\n"
-#~ "dovranno essere inizializzate. In genere questo metodo offre buoni\n"
-#~ "risultati.\n"
-#~ "\n"
-#~ "Se DrakX non riesce a stabilire quali sono le opzioni da passare alla\n"
-#~ "scheda, dovrete specificarle manualmente. Per favore consultate il\n"
-#~ "``Manuale dell'utente'' (capitolo 3, paragrafo \"Ricerca di informazioni\n"
-#~ "sul vostro hardware\") per qualche suggerimento su come recuperare i\n"
-#~ "parametri richiesti dalla documentazione dell'hardware, dal sito web del\n"
-#~ "produttore (se disponete di un accesso a Internet) oppure da Microsoft\n"
-#~ "Windows (se avete utilizzato quest'hardware sul vostro sistema con\n"
-#~ "Windows)."
-
-#~ msgid ""
-#~ "Here are presented various parameters concerning your machine. Depending "
-#~ "on\n"
-#~ "your installed hardware, you may - or not, see the following entries:\n"
-#~ "\n"
-#~ " * \"Mouse\": mouse check the current mouse configuration and click on "
-#~ "the\n"
-#~ "button to change it if necessary.\n"
-#~ "\n"
-#~ " * \"Keyboard\": keyboard check the current keyboard map configuration "
-#~ "and\n"
-#~ "click on the button to change that if necessary.\n"
-#~ "\n"
-#~ " * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-#~ "the\n"
-#~ "language you have chosen. But here again, as for the choice of a "
-#~ "keyboard,\n"
-#~ "you may not be in the country for which the chosen language should\n"
-#~ "correspond. Hence, you may need to click on the Timezone button in order "
-#~ "to\n"
-#~ "configure the clock according to the time zone you are in.\n"
-#~ "\n"
-#~ " * \"Printer\": clicking on the No Printer button will open the printer\n"
-#~ "configuration wizard.\n"
-#~ "\n"
-#~ " * \"Sound card\": if a sound card is detected on your system, it is\n"
-#~ "displayed here. No modification possible at installation time.\n"
-#~ "\n"
-#~ " * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-#~ "here. No modification possible at installation time.\n"
-#~ "\n"
-#~ " * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-#~ "displayed here. You can click on the button to change the parameters\n"
-#~ "associated to it."
-#~ msgstr ""
-#~ "Qui sono riportati vari parametri relativi alla vostra macchina. In base\n"
-#~ "all'hardware installato sulla vostra macchina potrete vedere (oppure no) "
-#~ "le\n"
-#~ "voci che seguono:\n"
-#~ "\n"
-#~ " * \"Mouse\": mouse controllate la configurazione attuale del mouse, e\n"
-#~ "cliccate sul pulsante per cambiarla, se necessario.\n"
-#~ "\n"
-#~ " * \"Tastiera\": tastiera controllate l'attuale mappa della tastiera, e\n"
-#~ "cliccate sul pulsante per cambiarla, se necessario.\n"
-#~ "\n"
-#~ " * \"Fuso orario\": fuso orarioDrakX, come opzione predefinita, deduce "
-#~ "il\n"
-#~ "vostro fuso orario dalla lingua che avete scelto. Ma anche in questo "
-#~ "caso,\n"
-#~ "come per la scelta della tastiera, potreste non trovarvi nella nazione "
-#~ "cui\n"
-#~ "corrisponde la lingua che avete scelto, in tal caso sarà necessario\n"
-#~ "cliccare su questo pulsante per poter configurare il fuso orario in base "
-#~ "a\n"
-#~ "quello dell'area geografica in cui vivete.\n"
-#~ "\n"
-#~ " * \"Stampante\": cliccando sul pulsante Nessuna stampante si richiamerà\n"
-#~ "l'assistente di configurazione della stampante.\n"
-#~ "\n"
-#~ " * \"Scheda audio\": se sul vostro sistema è stata individuata una "
-#~ "scheda\n"
-#~ "audio, verrà mostrata qui. Al momento dell'installazione non è possibile\n"
-#~ "apportare alcuna modifica.\n"
-#~ "\n"
-#~ " * \"Scheda TV\": se sul vostro sistema è stata individuata una scheda "
-#~ "TV,\n"
-#~ "verrà mostrata qui. Al momento dell'installazione non è possibile "
-#~ "apportare\n"
-#~ "alcuna modifica.\n"
-#~ "\n"
-#~ " * \"Scheda ISDN\": se sul vostro sistema è stata individuata una scheda\n"
-#~ "ISDN, verrà mostrata qui. Potete cliccare sul pulsante relativo per\n"
-#~ "cambiare i suoi parametri."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now choose which services you want to start at boot time.\n"
-#~ "\n"
-#~ "Here are presented all the services available with the current "
-#~ "installation.\n"
-#~ "Review them carefully and uncheck those that are not always needed at "
-#~ "boot time.\n"
-#~ "\n"
-#~ "You can get a short explanatory text on a service by placing the mouse "
-#~ "cursor on\n"
-#~ "the service name. If you are not sure whether a service is useful or not, "
-#~ "it is\n"
-#~ "safer to leave the default behavior though.\n"
-#~ "\n"
-#~ "Be very careful in this step if you intend to use your machine as a "
-#~ "server: you\n"
-#~ "will probably want not to start any services that you don't need. Please\n"
-#~ "remember that several services can be dangerous if they are enable on a "
-#~ "server.\n"
-#~ "In general, select only the services that you really need."
-#~ msgstr ""
-#~ "Ora puoi scegliere i servizi che devono essere avviati al momento del "
-#~ "boot.\n"
-#~ "\n"
-#~ "\n"
-#~ "Quando il tuo mouse passa sopra un oggetto, apparirà un piccolo testo di "
-#~ "aiuto\n"
-#~ "che descrive la funzione del servizio.\n"
-#~ "\n"
-#~ "\n"
-#~ "Presta particolare attenzione a questa fase se intendi usare la tua "
-#~ "macchina\n"
-#~ "come server: probabilmente non vorrai avviare alcun servizio di cui non\n"
-#~ "hai bisogno. Ricorda che numerosi servizi possono essere pericolosi\n"
-#~ "se attivati su un server. Come regola generale, seleziona solo i servizi "
-#~ "di cui hai davvero bisogno."
-
-#~ msgid ""
-#~ "Your new Mandrake Linux operating system is currently being installed. "
-#~ "This\n"
-#~ "operation should take a few minutes (it depends on size you choose to "
-#~ "install\n"
-#~ "and the speed of your computer).\n"
-#~ "\n"
-#~ "Please be patient."
-#~ msgstr ""
-#~ "Il tuo nuovo sistema operativo Mandrake Linux è in fase\n"
-#~ "di installazione. Questa operazione dovrebbe richiedere alcuni minuti "
-#~ "(dipende\n"
-#~ "dalla dimensione che hai scelto di installare e dalla velocità del tuo "
-#~ "computer).\n"
-#~ "\n"
-#~ "\n"
-#~ "Per favore pazienta."
-
-#~ msgid "Spooler: "
-#~ msgstr "Spooler: "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Prova il mouse qui."
-
-#~ msgid "Press next to continue."
-#~ msgstr "Premi avanti per continuare"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "Seleziona la lingua desiderata per l'installazione e l'uso del sistema."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Devi accettare i termini della licenza qui sopra per continuare "
-#~ "l'installazione.\n"
-#~ "\n"
-#~ "\n"
-#~ "Per favore clicca su \"Accetta\" se sei d'accordo con i suoi termini.\n"
-#~ "\n"
-#~ "\n"
-#~ "Per favore clicca su \"Rifiuta\" se non sei d'accordo con i suoi "
-#~ "termini.\n"
-#~ "L'installazione finirà senza modificare la configurazione corrente."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Scegli l'impostazione della tua tastiera dalla lista qui sopra"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Se lo desideri, altre lingue (oltre a quella da te scelto all'inizio\n"
-#~ "dell'installazione) saranno disponibili dopo l'installazione, per favore\n"
-#~ "sceglile dalla lista qui sopra. Se vuoi sceglierle tutte, devi solo\n"
-#~ "selezionare \"Tutte\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Seleziona:\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Personalizzata: sei hai familiarità con GNU/Linux, sarai in grado "
-#~ "di \n"
-#~ "scegliere l'utilizzo normale del tuo computer. Vedi più avanti per \n"
-#~ "ulteriori dettagli.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Esperto: se conosci bene GNU/Linux e vuoi effettuare una "
-#~ "installazione\n"
-#~ "altamente personalizzata, questa classe d'installazione è per te. Sarai "
-#~ "in\n"
-#~ "grado di scegliere l'utilizzo del tuo sistema installato come per \n"
-#~ "\"Personalizzata\"."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Adesso devi indicare l'uso principale per questa macchina. Puoi scegliere "
-#~ "tra:\n"
-#~ "\n"
-#~ "* Workstation: la scelta ideale se intendi usare questo computer "
-#~ "principalmente per\n"
-#~ "  l'uso di ogni giorno, in ufficio o a casa.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Sviluppatore: se intendi usare la tua macchina soprattutto per lo "
-#~ "sviluppo di software, questa è\n"
-#~ "  una buona scelta. Verrà installata una raccolta completa del software "
-#~ "necessario a formattare, compilare ed effettuare\n"
-#~ "  il debug del tuo codice sorgente, come pure per creare pacchetti "
-#~ "software.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: la scelta migliore se intendi usare questa macchina come "
-#~ "server. Può trattarsi di un server\n"
-#~ "  di file (NFS o SMB), un server di stampa (in stile Unix o Windows),\n"
-#~ "  un server di autentificazione (NIS), un server di database, e così "
-#~ "via.\n"
-#~ "  Trattandosi di un server, non aspettarti che vengano installati "
-#~ "fronzoli di vario tipo (KDE, GNOME, etc.)."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Ora puoi scegliere il gruppo di pacchetti che vuoi installare o "
-#~ "aggiornare.\n"
-#~ "\n"
-#~ "Quindi DrakX controllerà se hai abbastanza spazio per installarli tutti. "
-#~ "In \n"
-#~ "caso negativo, ti avvertirà. Se vuoi continuare lo stesso, procederà "
-#~ "alla\n"
-#~ "installazione dei gruppi selezionati, ma tralascerà alcuni pacchetti di "
-#~ "minore\n"
-#~ "interesse. Alla fine della lista puoi scegliere l'opzione\n"
-#~ "\"Selezione individuale pacchetti\"; in questo caso dovrai sfogliare una "
-#~ "lista\n"
-#~ "di più di 1000 pacchetti..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Puoi ora scegliere individualmente tutti i pacchetti\n"
-#~ "che desideri installare.\n"
-#~ "\n"
-#~ "\n"
-#~ "Puoi espandere o raggruppare la struttura cliccando sulle opzioni "
-#~ "nell'angolo\n"
-#~ "a sinistra della finestra dei pacchetti.\n"
-#~ "\n"
-#~ "\n"
-#~ "Se preferisci vedere i pacchetti ordinati alfabeticamente, clicca sulla\n"
-#~ "icona \"Cambia ordinamento semplice o a gruppi\".\n"
-#~ "\n"
-#~ "Se non vuoi essere avvertito per le dipendenze, clicca su \"Dipendenze\n"
-#~ "in automatico\". Se lo fai, nota che deselezionare un pacchetto potrebbe\n"
-#~ "silenziosamente deselezionare alcuni altri pacchetti che da esso "
-#~ "dipendono."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Se hai tutti i CD elencati nella lista qui sopra, clicca Ok.\n"
-#~ "Se non hai nessuno di quei CD, clicca Cancel.\n"
-#~ "Se mancano solo alcuni CDs, deselezionali, e clicca Ok."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "Adesso puoi provare il tuo mouse. Usa i pulsanti e la ruotina per "
-#~ "verificare\n"
-#~ "l'esattezza delle impostazioni. Se non vanno bene, clicca su \"Cancel\" "
-#~ "per\n"
-#~ "scegliere un altro driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "Se stai effettuando l'installazione su un computer Apple con mouse a un "
-#~ "pulsante,\n"
-#~ "avrai la possibilità di specificare dei tasti per emulare il secondo e il "
-#~ "terzo\n"
-#~ "pulsante del mouse. Questo ti permetterà di godere di una completa "
-#~ "funzionalità\n"
-#~ "del mouse sia nella console di Linux sia nella GUI di X Window.\n"
-#~ "\n"
-#~ "\n"
-#~ "Se possiedi un mouse ADB, per favore scegli USB, e il kernel si prenderà "
-#~ "cura\n"
-#~ "di configurare correttamente l'hardware del mouse."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Se desideri connettere il tuo computer a Internet o\n"
-#~ "a una rete locale, per favore scegli l'opzione corretta. Per favore "
-#~ "accendi\n"
-#~ "il tuo dispositivo prima di scegliere l'opzione corretta per permettere\n"
-#~ "a DrakX di individuarlo automaticamente.\n"
-#~ "\n"
-#~ "\n"
-#~ "Se non hai alcuna connessione ad Internet o a una rete locale, scegli\n"
-#~ "\"Disabilita rete\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Se desideri configurare la rete più tardi dopo l'installazione, o se hai\n"
-#~ "finito di configurare la tua connessione di rete, scegli \"Fatto\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Nessun modem individuato. Per favore seleziona la porta seriale a cui è "
-#~ "connesso.\n"
-#~ "\n"
-#~ "\n"
-#~ "Per tua informazione, la prima porta seriale (chiamata \"COM1\" sotto MS\n"
-#~ "Windows) è chiamata \"ttyS0\" sotto Linux."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Ora puoi inserire le opzioni di chiamata. Se non le sai o\n"
-#~ "non sei sicuro di cosa inserire, le informazioni esatte possono essere\n"
-#~ "ottenute dal tuo Internet Service Provider. Se non immetti "
-#~ "l'informazione\n"
-#~ "DNS (nome server) qui, sarà ottenuta dal tuo Internet Service Provider\n"
-#~ "in fase di connessione."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Se il tuo modem è esterno, per favore accendilo e lascia che DrakX lo "
-#~ "riconosca in automatico."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Per favore accendi il tuo modem e scegli quello corretto."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Se non sei sicuro che le informazioni qui sopra\n"
-#~ "siano corrette, o se non sai o sei sicuro di cosa immettere, le "
-#~ "informazioni\n"
-#~ "corrette possono essere ottenute dal tuo Internet Service Provider. Se "
-#~ "non\n"
-#~ "inserisci l'informazione DNS (server dei nomi) qui, verrà ottenuta dal "
-#~ "tuo \n"
-#~ "Internet Service Provider in fase di connessione."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Adesso puoi inserire il nome del tuo host se necessario. Se non sei "
-#~ "sicuro di cosa\n"
-#~ "inserire, le informazioni corrette possono essere reperite presso il tuo "
-#~ "ISP (Internet Service Provider)."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Adesso puoi configurare il dispositivo di rete.\n"
-#~ "\n"
-#~ "   * Indirizzo IP: se non lo conosci o non sei sicuro, chiedi al tuo "
-#~ "amministratore di rete.\n"
-#~ "     Se più avanti scegli l'opzione \"IP automatico\", non dovresti "
-#~ "inserire un indirizzo IP qui.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" è generalmente una buona scelta. Se non "
-#~ "sei\n"
-#~ "sicuro, chiedi all'amministratore di rete.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * IP automatico: se la tua rete usa i protocolli BOOTP o DHCP, "
-#~ "scegli \n"
-#~ "questa opzione. Se selezionata, nessun valore è necessario in \"indirizzo "
-#~ "IP\".\n"
-#~ "Se non sei sicuro, o non sai se è necessario attivare questa opzione, "
-#~ "chiedi al tuo amministratore di rete."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Adesso puoi inserire il nome del tuo host se necessario. Se non\n"
-#~ "lo sai o non sei sicuro, chiedi al tuo amministratore di rete."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Adesso puoi inserire il nome del tuo host se necessario. Se non\n"
-#~ "lo sai o non sei sicuro, lascia in bianco."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Puoi ora inserire le opzioni di connessione. Se non sei sicuro di cosa\n"
-#~ "inserire, le informazioni corrette possono essere reperite presso il tuo "
-#~ "ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Se userai dei proxy, per favore configurali ora. Se non sai se userai\n"
-#~ "dei proxy, chiedi al tuo amministratore di rete o all'ISP."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Puoi installare i pacchetti di crittografia, se la tua connessione "
-#~ "Internet\n"
-#~ "è stata configurata correttamente. Per prima cosa scegli un mirror da cui "
-#~ "scaricare\n"
-#~ "i pacchetti, e poi scegli i pacchetti da installare.\n"
-#~ "\n"
-#~ "\n"
-#~ "Nota che devi scegliere mirror e pacchetti di crittografia in conformità "
-#~ "con\n"
-#~ "quanto previsto dalla tua legislazione."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Puoi ora scegliere il tuo fuso orario in base a dove vivi."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Puoi configurare una stampante locale (connessa al tuo computer) o una\n"
-#~ "remota (accessibile via una rete Unix, Netware o Microsoft Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Se desideri essere in grado di stampare, per favore scegli uno dei due\n"
-#~ "sistemi di stampa, CUPS o LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS è un sistema di stampa per sistemi Unix nuovo, potente e flessibile "
-#~ "(CUPS\n"
-#~ "significa \"Common Unix Printing System\"). È il sistema predefinito in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR è il vecchio sistema di stampa usato in precedenti distribuzioni "
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "Se non hai una stampante, clicca su \"Nessuno\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux può gestire molti tipi di stampanti. Ognuno di essi richiede "
-#~ "un\n"
-#~ "differente settaggio.\n"
-#~ "\n"
-#~ "\n"
-#~ "Se la tua stampante è fisicamente connessa al computer, scegli \n"
-#~ "\"Stampante locale\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Se vuoi accedere a una stampante che si trova su una macchina remota "
-#~ "Microsoft\n"
-#~ "Windows (o una macchina Unix che usa il protocollo SMB), scegli\n"
-#~ "\"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Per favore, accendi la tua stampante prima di continuare per permettere a "
-#~ "DrakX\n"
-#~ "di identificarla.\n"
-#~ "\n"
-#~ "Qui devi inserire alcune informazioni.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nome stampante: lo spooler di stampa usa \"lp\" come nome "
-#~ "predefinito. Perciò devi avere una stampante chiamata \"lp\".\n"
-#~ "     Se hai solo una stampante, puoi assegnarle diversi nomi. Devi solo "
-#~ "separarli con un carattere pipe\n"
-#~ "     (un \"|\"). Così, se preferisci un nome più significativo, devi "
-#~ "metterlo per primo, es: \"Mia Stampante|lp\".\n"
-#~ "     La stampante che ha \"lp\" nel(i) nome(i) sarà quella predefinita.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Descrizione: è opzionale, ma può essere utile se hai diverse "
-#~ "stampanti connesse al tuo computer o se permetti ad\n"
-#~ "     altri computers di accedere a questa stampante.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Posizione: se vuoi inserire qualche informazione su dove\n"
-#~ "si trova la tua stampante, mettila qui (sei libero di scrivere ciò\n"
-#~ "     che vuoi, per esempio \"2ndo piano\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Qui devi inserire alcune informazioni.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nome della coda: lo spooler di stampa usa \"lp\" come nome "
-#~ "predefinito. Perciò devi avere una stampante chiamata \"lp\".\n"
-#~ "     Se hai solo una stampante, puoi assegnarle diversi nomi. Devi solo "
-#~ "separarli con un carattere pipe\n"
-#~ "     (un \"|\"). Così, se preferisci un nome più significativo, devi "
-#~ "metterlo per primo, es: \"Mia Stampante|lp\".\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Directory di spool: è la directory in cui sono immagazzinati i "
-#~ "lavori di stampa. Mantieni le\n"
-#~ "impostazioni predefinite se non sai cosa usare\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Connessione Stampante: se la tua stampante è fisicamente connessa al "
-#~ "tuo computer, scegli \"Stampante locale\".\n"
-#~ "     Se vuoi accedere ad una stampante che si trova su una macchina Unix "
-#~ "remota, scegli \"Stampante lpd remota\".\n"
-#~ "\n"
-#~ "\n"
-#~ "    Se vuoi accedere a una stampante che si trova su una macchina "
-#~ "Microsoft Windows remota (o su una Unix che\n"
-#~ "    usa il protocollo SMB), scegli \"SMB/Windows95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "    Se vuoi accedere a una stampante che fa parte di una rete NetWare, "
-#~ "scegli \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "La tua stampante non è stata individuata. Per favore, inserisci il nome "
-#~ "del\n"
-#~ "dispositivo al quale è connessa.\n"
-#~ "\n"
-#~ "\n"
-#~ "Per tua informazione, la maggior parte delle stampanti è connessa alla "
-#~ "prima porta\n"
-#~ "parallela. È chiamata \"/dev/lp0\" sotto GNU/Linux e \"LPT1\" sotto "
-#~ "Microsoft\n"
-#~ "Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Ora puoi scegliere la tua stampante dalla lista qui sopra."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Per favore seleziona le opzioni corrette per la tua stampante.\n"
-#~ "Se non sai cosa scegliere, consulta la sua documentazione.\n"
-#~ "\n"
-#~ "\n"
-#~ "Potrai provare la tua configurazione nella prossima fase e sarai in "
-#~ "grado\n"
-#~ "di modificarla se non funziona come vuoi."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Ora puoi inserire la password di root per il tuo sistema Mandrake Linux.\n"
-#~ "La password deve essere digitata due volte per verificare che\n"
-#~ "entrambi gli inserimenti siano uguali.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root è l'amministratore del sistema, ed è l'unico utente\n"
-#~ "abilitato alla modifica della configurazione del sistema. Perciò, scegli\n"
-#~ "la password attentamente! L'uso non autorizzato dell'account root può\n"
-#~ "essere estremamente pericoloso per l'integrità del sistema, i dati che\n"
-#~ "contiene, e altri sistemi cui è connesso. La password dovrebbe essere un\n"
-#~ "insieme di caratteri alfanumerici, e lunga almeno 8 caratteri. Non\n"
-#~ "dovrebbe *mai* essere scritta su carta. Non creare una password troppo "
-#~ "lunga\n"
-#~ "o complicata, ad ogni modo: devi essere in grado di ricordarla senza "
-#~ "troppo\n"
-#~ "sforzo."
-
-#~ msgid ""
-#~ "If your network uses LDAP (or NIS) protocol for authentication, select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "Se la tua rete usa il protocollo LDAP (o NIS) per l'autenticazione, "
-#~ "scegli\n"
-#~ "\"LDAP\" (o \"NIS\") come autenticazione. Se non sei sicuro, chiedi al "
-#~ "tuo amministratore\n"
-#~ "di rete.\n"
-#~ "\n"
-#~ "Se il tuo computer non è connesso a reti con autenticazione, potresti "
-#~ "preferire la\n"
-#~ "scelta di \"File locali\" per l'autenticazione."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Ora puoi creare uno o più account per utenti \"normali\", come "
-#~ "controparte\n"
-#~ "dell'account dell'utente \"privilegiato\", root. Puoi creare uno o più\n"
-#~ "account per ogni persona cui vuoi permettere di usare il computer.\n"
-#~ "Nota che ogni utente avrà le sue proprie preferenze (ambiente\n"
-#~ "grafico, impostazioni dei programmi, etc.) e la sua \"directory home\" "
-#~ "in\n"
-#~ "cui sono archiviate queste preferenze.\n"
-#~ "\n"
-#~ "\n"
-#~ "Prima di tutto, crea un account per te stesso! Anche se sarai l'unico "
-#~ "utente\n"
-#~ "della macchina, NON dovresti connetterti come root per uso giornaliero "
-#~ "del sistema: è un\n"
-#~ "alto rischio per la sicurezza. Rendere il sistema inutilizzabile è molto "
-#~ "spesso questione di un solo tasto sbagliato.\n"
-#~ "\n"
-#~ "\n"
-#~ "Perciò dovresti connetterti al sistema usando l'accesso utente che avrai\n"
-#~ "creato qui, e fare il login come root solo per scopi di amministrazione\n"
-#~ "e manutenzione."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "È fortemente consigliato creare un disco di avvio. Se non puoi\n"
-#~ "avviare il tuo computer, è l'unico modo per recuperarlo senza doverlo\n"
-#~ "reinstallare."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Le opzioni principali di LILO e grub sono:\n"
-#~ "  - Boot device: specifica il nome del dispositivo (es. una partizione\n"
-#~ "del disco rigido) che contiene il settore di boot. A meno che tu non sia "
-#~ "sicuro di un'impostazione diversa, scegli \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ritardo prima di caricare l'immagine di default: specifica il tempo "
-#~ "(in\n"
-#~ "decimi di secondo) che il boot loader deve attendere prima di caricare "
-#~ "la \n"
-#~ "prima immagine.\n"
-#~ "È utile su sistemi che effettuano subito il boot dal disco rigido dopo "
-#~ "avere\n"
-#~ "abilitato la tastiera. Il boot loader non aspetta se \"ritardo\" è "
-#~ "omesso\n"
-#~ "o se è fissato a zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Modo Video: specifica il modo testo VGA che dovrebbe essere "
-#~ "selezionato\n"
-#~ "al momento del boot. Sono disponibili i valori seguenti: \n"
-#~ "\n"
-#~ "    * normale: seleziona il normale modo testo 80x25.\n"
-#~ "\n"
-#~ "    * <numero>: usa il modo testo corrispondente.\n"
-#~ "\n"
-#~ "  - Pulisci \"/tmp\" ad ogni boot: se vuoi cancellare tutti i file e le "
-#~ "directory\n"
-#~ "contenute in \"/tmp\" all'avvio del sistema selezionate questa opzione.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precisa RAM se necessario: sfortunatamente non esiste un metodo "
-#~ "standard per\n"
-#~ "interrogare il BIOS riguardo la quantità di RAM presente. Di conseguenza, "
-#~ "Linux può\n"
-#~ "fallire nel tentare di determinare tale quantità. In tal caso puoi\n"
-#~ "specificare qui la cifra corretta. Nota che una differenza di 2 or 4\n"
-#~ "Mb tra memoria individuata e memoria presente nel sistema è normale."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Le opzioni principali di SILO sono:\n"
-#~ "  - Installazione bootloader: Indica dove vuoi posizionare le "
-#~ "informazioni\n"
-#~ "richieste per avviare GNU/Linux. A meno che tu non sappia esattamente "
-#~ "cosa\n"
-#~ "stai facendo, scegli \"Primo settore del drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ritardo prima di caricare l'immagine di default: Specifica il tempo "
-#~ "in\n"
-#~ "decimi di secondo che il boot loader deve attendere prima di caricare "
-#~ "la \n"
-#~ "prima immagine.\n"
-#~ "È utile su sistemi che caricano immediatamente dall'hard disk dopo avere\n"
-#~ "abilitato la tastiera. Il boot loader non aspetta se \"ritardo\" è "
-#~ "omesso\n"
-#~ "o se è fissato a zero."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Adesso è il momento di configurare il sistema X-Windows, che è il cuore\n"
-#~ "della GUI (Interfaccia Grafica Utente) di GNU/Linux. A questo scopo,\n"
-#~ "devi configurare la tua scheda video e il monitor. La maggior parte\n"
-#~ "di queste fasi è automatizzata, però, perciò il tuo lavoro consisterà\n"
-#~ "solo nel verificare cosa è stato fatto e accettare le impostazioni :)\n"
-#~ "\n"
-#~ "Quando la configurazione è finita, sarà lanciato X (a meno che\n"
-#~ "tu dica a DrakX di non farlo) così che tu possa controllare se le\n"
-#~ "impostazioni sono corrette. Se non vanno bene, puoi tornare indietro e\n"
-#~ "cambiarle tutte le volte che è necessario."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Se qualcosa è sbagliato nella configurazione di X, usa queste opzioni "
-#~ "per\n"
-#~ "configurare correttamente il Sistema X Window."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Se preferisci usare un login grafico, scegli \"Sì\". Altrimenti, scegli\n"
-#~ "\"No\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Puoi scegliere un livello di sicurezza per il sistema. Consulta il "
-#~ "manuale per ulteriori\n"
-#~ "  informazioni. Come regola generale, se non sai cosa scegliere mantieni "
-#~ "l'opzione \n"
-#~ "predefinita.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Il sistema sta per essere riavviato.\n"
-#~ "\n"
-#~ "Dopo il riavvio, il tuo sistema Mandrake Linux sarà caricato "
-#~ "automaticamente.\n"
-#~ "Se vuoi avviare un altro sistema operativo, per favore leggi le "
-#~ "istruzioni\n"
-#~ "aggiuntive."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Ceca (Programmatori)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovacca (Programmatori)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Nome del profilo da creare:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Scrivi /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "Ripristina da file"
-
-#~ msgid "Save in file"
-#~ msgstr "Salva su file"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Ripristina da floppy"
-
-#~ msgid "Format all"
-#~ msgstr "Formatta tutto"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Dopo la formattazione di tutte le partizioni,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "tutti i dati su queste partizioni saranna persi"
-
-#~ msgid "Reload"
-#~ msgstr "Ricarica"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Vuoi generare un floppy di installazione automatica per replicare\n"
-#~ "questa installazione di Linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Configurazione ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Con un server remoto CUPS non devi configurare alcuna stampante\n"
-#~ "adesso: le stampanti saranno individuate automaticamente,\n"
-#~ "a meno che non dipendano da un server su una rete\n"
-#~ "diversa. In quest'ultimo caso è necessario\n"
-#~ "specificare l'indirizzo IP del server CUPS e, se vuoi, il numero della "
-#~ "porta."
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "Inserisci il nome della stampante ed eventuali commenti"
-
-#~ msgid "Remote queue"
-#~ msgstr "Nome coda remota"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Nome coda remota assente!"
-
-#~ msgid "Pipe into command"
-#~ msgstr "Invia tramite pipe al comando"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "Qui potete indicare un qualsiasi comando arbitrario al quale il job "
-#~ "dovrebbe essere inviato per mezzo di una pipe invece di mandarlo "
-#~ "direttamente alla stampante."
-
-#~ msgid "Command line"
-#~ msgstr "Linea di comando"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "Dev'essere inserita una linea di comando!"
-
-#~ msgid "Settings"
-#~ msgstr "Impostazioni"
-
-#~ msgid "Profile "
-#~ msgstr "Profilo "
-
-#~ msgid "Statistics"
-#~ msgstr "Statistiche"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Velocità in trasmissione: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Velocità in ricezione: "
-
-#~ msgid "Connection Time: "
-#~ msgstr "Tempo di connessione: "
-
-#~ msgid "Logs"
-#~ msgstr "Log"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Mi sto connettendo a Internet "
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Mi sto disconnettendo da internet "
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "La disconnessione da internet è fallita"
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "La disconnessione da internet è stata effettuata"
-
-#~ msgid "Connection complete."
-#~ msgstr "Connessione effettuata"
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "La connessione è fallita.\n"
-#~ "Verifica la tua configurazione nel Centro di Controllo Mandrake."
-
-#~ msgid "Color configuration"
-#~ msgstr "Configurazione colori"
-
-#~ msgid "sent: "
-#~ msgstr "inviato/a: "
-
-#~ msgid "received: "
-#~ msgstr "ricevuto/a: "
-
-#~ msgid "average"
-#~ msgstr "media"
-
-#~ msgid "Connect"
-#~ msgstr "Connetti"
-
-#~ msgid "Disconnect"
-#~ msgstr "Disconnetti"
-
-#~ msgid "/File/_New"
-#~ msgstr "/File/_Nuovo"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/File/_Apri"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>O"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/File/_Salva"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/File/Save _come"
-
-#~ msgid "/_Options"
-#~ msgstr "/_Opzioni"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/Opzioni/Test"
-
-#~ msgid "/_Help"
-#~ msgstr "/_Aiuto"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/Aiuto/_Riguardo..."
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Runlevel predefinito"
-
-#~ msgid "Europe"
-#~ msgstr "Europa"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "Rimuovi coda"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr ""
-#~ "Non è stato possibile interpretare il contenuto del file di "
-#~ "configurazione."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "File di configurazione sconosciuto"
-
-#~ msgid "Adapter"
-#~ msgstr "Adattatore"
-
-#~ msgid "Disable network"
-#~ msgstr "Disabilita rete"
-
-#~ msgid "Enable network"
-#~ msgstr "Abilita rete"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Ora puoi provare il tuo mouse. Usa i pulsanti e la rotella per\n"
-#~ "verificare che i settaggi siano corretti. Se non lo sono, puoi cliccare "
-#~ "su\n"
-#~ "\"Annulla\" per scegliere un altro driver."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Connessione DSL (o ADSL)"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Puoi specificare direttamente l'URI per accedere alla stampante con CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Sì, stampa la pagina di prova ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Sì, stampa la pagina di prova Postscript"
-
-#~ msgid "Paper Size"
-#~ msgstr "Formato carta"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Espulsione pagina dopo il job?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Opzioni driver Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Opzioni profondità colore"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Stampa testo come PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Correggi lo stair-stepping del testo?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Numero di pagine per pagine di output"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Margine destro/sinistro in punti (1/72 di pollice)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Margine superiore/inferiore in punti (1/72 di pollice)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Opzioni GhostScript supplementari"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Opzioni testo supplementari"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Ordine pagine inverso"
-
-#~ msgid "CUPS starting"
-#~ msgstr "Sto avviando CUPS"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Scegli connessione stampante remota"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Ogni stampante ha bisogno di un nome (per esempio lp).\n"
-#~ "Possono essere definiti altri parametri, come la descrizione della "
-#~ "stampante \n"
-#~ "o dove si trova. Che nome dovrebbe essere usato per questa\n"
-#~ "stampante e in che modo è connessa?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Ogni coda di stampa (a cui sono diretti i job di stampa) ha bisogno di\n"
-#~ "un nome (spesso lp) e una directory di spool associata ad esso. Che\n"
-#~ "nome e directory dovranno essere usati per questa coda e come è connessa\n"
-#~ "la stampante?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nome della coda"
-
-#~ msgid "Spool directory"
-#~ msgstr "Directory di spool"
-
-#~ msgid "Disable"
-#~ msgstr "Disabilita"
-
-#~ msgid "Enable"
-#~ msgstr "Abilita"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Per avere un sistema più sicuro, dovresti scegliere \"Usa shadow file\" "
-#~ "e\n"
-#~ "\"Usa passwords MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Se la tua rete usa NIS, scegli \"Usa NIS\". Se non sai, chiedi al tuo\n"
-#~ "amministratore di rete."
-
-#~ msgid "yellow pages"
-#~ msgstr "pagine gialle"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Dns 1 del Provider"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Dns 2 del provider"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Come vuoi connetterti a Internet?"
-
-#~ msgid "cannot fork: "
-#~ msgstr "non ho potuto sdoppiare: "
-
-#~ msgid "Configure..."
-#~ msgstr "Configura..."
-
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "Configurazione di Lilo/Grub"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Dimensione selezionata %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Sto attivando la tua connessione ..."
-
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Configurazione di Lilo/Grub"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr ""
-#~ "Questo script di avvio prova a caricare i moduli per il tuo\n"
-#~ "mouse usb."
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Ora che la tua connessione Internet è configurata, il tuo computer\n"
-#~ "può essere configurato per condividere la sua connessione Internet.\n"
-#~ "Nota: hai bisogno di un adattatore di rete dedicato per realizzare una\n"
-#~ "Rete di Area Locale (LAN).\n"
-#~ "\n"
-#~ "Vuoi configurare la condivisione della connessione Internet?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Dipendenze automatiche"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Configura LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Crea floppy di boot"
-
-#~ msgid "Format floppy"
-#~ msgstr "Formatta floppy"
-
-#~ msgid "Choice"
-#~ msgstr "Scelta"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Puoi ora selezionare alcune opzioni varie per il tuo sistema.\n"
-#~ "\n"
-#~ "* Abilita ottimizzazione disco rigido: questa opzione può migliorare le "
-#~ "prestazioni\n"
-#~ "  del disco rigido, ma è solo per utenti avanzati: alcuni chipset "
-#~ "malfunzionanti\n"
-#~ "  possono rovinare i tuoi dati, perciò attento. Nota che il kernel ha al "
-#~ "suo interno\n"
-#~ "  una lista nera di dischi e chipset, ma se vuoi evitare brutte sorprese "
-#~ "lascia questa\n"
-#~ "  opzione non selezionata.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Scegli livello di sicurezza: puoi scegliere un livello di sicurezza\n"
-#~ "  per il tuo sistema.\n"
-#~ "  Per favore fai riferimento al manuale per avere informazioni complete.\n"
-#~ "  Come regola generale, se non sei sicuro lascia l'opzione predefinita.\n"
-#~ "\n"
-#~ "* Precisa dimensione RAM se necessario: sfortunatamente, nel mondo "
-#~ "attuale\n"
-#~ "  dei PC non c'è nessun metodo standard per chiedere al BIOS quanta "
-#~ "memoria\n"
-#~ "  è installata nel computer. Come conseguenza, GNU/Linux può fallire nel "
-#~ "determinare\n"
-#~ "  correttamente la quantità di RAM. In questo caso, puoi specificare qui "
-#~ "la giusta \n"
-#~ "  dimensione della RAM. Nota che una differenza di 2 o 4 Mb tra memoria "
-#~ "individuata\n"
-#~ "  e memoria effetivamente presente nel sistema è normale.\n"
-#~ "\n"
-#~ "* Automounting di media rimovibili: se preferisci non eseguire "
-#~ "manualmente\n"
-#~ "  il mount di dischi rimovibili (CD-ROM, Floppy, Zip) scrivendo \"mount\" "
-#~ "e\n"
-#~ "  \"umount\", scegli questa opzione.\n"
-#~ "\n"
-#~ "* Abilita Num Lock all'avvio: se vuoi abilitare il Number Lock dopo\n"
-#~ "  il boot, scegli questa opzione Nota: non dovreste abilitare questa "
-#~ "opzione su un portatile,\n"
-#~ "  inoltre Num Lock potrebbe non funzionare sotto X."
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Varie"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Questioni varie"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Non puoi usare supermount in alto livello di sicurezza"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "attenzione: A QUESTO LIVELLO DI SICUREZZA, IL LOGIN COME ROOT IN CONSOLE "
-#~ "NON\n"
-#~ "È CONSENTITO! Se vuoi essere root, devi fare il login come utente e poi\n"
-#~ "usare \"su\". Più in generale, non aspettarti di usare la tua macchina "
-#~ "se\n"
-#~ "non come server. Sei stato avvertito."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Fai molta attenzione, avere il numlock attivato fa sì che molti tasti\n"
-#~ "quando premuti diano un risultato diverso dalle lettere normali \n"
-#~ "(es: premere 'p' da come risultato '6')"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Applicazioni scientifiche"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Primo server DNS"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Secondo server DNS"
-
-#~ msgid "using module"
-#~ msgstr "usando il modulo"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Quale bootloader(s) vuoi usare?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Floppy di auto installazione"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "provo a cercare un modem?"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Disabilita la connessione a Internet"
-
-#~ msgid "Configure local network"
-#~ msgstr "Configura rete locale"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Configura la connessione a Internet / Configura una rete locale"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "La rete locale è già stata configurata.\n"
-#~ "Desideri:"
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Manipolazione Grafica"
-
-#~ msgid "Multimedia"
-#~ msgstr "Multimedia"
-
-#~ msgid "Sciences"
-#~ msgstr "Scienze"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Programmi Chat (IRC o messaggerie istantanee) come xchat, licq, gaim, e "
-#~ "utilità per trasferimento files"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Utilità di comunicazione"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Utilità Internet"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Clients e servers di database (mysql e postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Sviluppo software con C/C++"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Configura fuso orario"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(può causare danni ai dati)"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "Usa le ottimizzazioni per disco fisso?"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Abilita num lock all'avvio"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Conferma Password"
-
-#~ msgid "default"
-#~ msgstr "predefinito"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Per cosa usi il tuo sistema?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Scegli la dimensione dell'installazione che vuoi"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Usa diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "Personalizzata"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Sei sicuro di essere un esperto? \n"
-#~ "Ti sarà concesso di fare cose potenti ma pericolose qui.\n"
-#~ "\n"
-#~ "Ti saranno poste domande come: ''Usa file shadow per le passwords?'',\n"
-#~ "sei pronto a rispondere a quel tipo di domande?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Usa file shadow"
-
-#~ msgid "shadow"
-#~ msgstr "shadow"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Usa password MD5"
-
-#~ msgid "Search"
-#~ msgstr "Cerca"
-
-#~ msgid "Package"
-#~ msgstr "Pacchetto"
-
-#~ msgid "Text"
-#~ msgstr "Testo"
-
-#~ msgid "Tree"
-#~ msgstr "Struttura"
-
-#~ msgid "Sort by"
-#~ msgstr "Riordina per"
-
-#~ msgid "Category"
-#~ msgstr "Categoria"
-
-#~ msgid "See"
-#~ msgstr "Vedi"
-
-#~ msgid "Installed packages"
-#~ msgstr "Pacchetti installati"
-
-#~ msgid "Available packages"
-#~ msgstr "Pacchetti disponibili"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Mostra solo singoli pacchetti"
-
-#~ msgid "Expand all"
-#~ msgstr "Espandi tutto"
-
-#~ msgid "Collapse all"
-#~ msgstr "Raggruppa tutto"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Aggiungi posizione dei pacchetti"
-
-#~ msgid "Update location"
-#~ msgstr "Aggiorna posizione"
-
-#~ msgid "Find Package"
-#~ msgstr "Trova Pacchetto"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Trova Pacchetto contenente il file"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Scegli tra Installato e Disponibile"
-
-#~ msgid "Choose package to install"
-#~ msgstr "Scegli pacchetti da installare"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Controllo dipendenze"
-
-#~ msgid "Wait"
-#~ msgstr "Attendi"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "I seguenti pacchetti saranno disinstallati"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "Disintallazione degli RPMs"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Quali pacchetti richiedono"
-
-#~ msgid "%s not found"
-#~ msgstr "%s non trovato"
-
-#~ msgid "No match"
-#~ msgstr "Nessuna corrispondenza"
-
-#~ msgid "No more match"
-#~ msgstr "Nessun'altra corrispondenza"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake è attualmente in modo ''poca memoria''.\n"
-#~ "Sto per rilanciare rpmdrake per permettere la ricerca dei files"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Quale file stai cercando?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Cosa stai cercando?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Dai un nome (es. 'extra', 'commerciale')"
-
-#~ msgid "Directory"
-#~ msgstr "Directory"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Nessun cdrom disponibile (niente in /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL della directory contenente gli RPMs"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Per FTP e HTTP, hai bisogno di inserire la locazione per hdlist\n"
-#~ "Deve essere relativa all'URL indicato sopra"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Per favore inserisci le seguenti informazioni"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s è già in uso"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Aggiornamento dell'archivio degli RPMs"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Sto per rimuovere la voce %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Ricerca dei singoli pacchetti"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "La ricerca dei singoli pacchetti richiede un pò di tempo"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Ho trovato una scheda ISDN:\n"
-
-#~ msgid "Other countries"
-#~ msgstr "Altri paesi"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "In quale stato ti trovi?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Modem Alcatel"
-
-#~ msgid "ECI modem"
-#~ msgstr "Modem ECI"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr "Se il tuo modem adsl è un Alcatel, scegli Alcatel. Altrimenti, ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "non usare pppoe"
-
-#~ msgid "mandatory"
-#~ msgstr "obbligatorio"
-
-#~ msgid "interesting"
-#~ msgstr "interessante"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (importante)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (molto bello)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (bello)"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, librerie, strumenti"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "A che porta seriale è connesso il mouse ?"
diff --git a/perl-install/share/po/ja.po b/perl-install/share/po/ja.po
deleted file mode 100644
index ba7e76394..000000000
--- a/perl-install/share/po/ja.po
+++ /dev/null
@@ -1,12255 +0,0 @@
-# DrakX Japanese Translation.
-# Copyright (c) 1999 MandrakeSoft
-# Junichi Kimura <jun@kde.gr.jp>, 1999-2000
-# YAMAGATA Hiroo <hiyori13@alum.mit.edu>, 1999-2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 1999-12-10 16:27+0100\n"
-"Last-Translator: YAMAGATA Hiroo <hiyori13@alum.mit.edu>\n"
-"Language-Team: Japanese\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=euc-jp\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "¥Ø¥Ã¥É¤ò¤½¤ì¤¾¤ìÆÈΩ¤ËÀßÄê"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Xinerama ³ÈÄ¥¤ò»È¤¦"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "°Ê²¼¤Î¥«¡¼¥É¤À¤±¤òÀßÄꡧ \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "¥Þ¥ë¥Á¥Ø¥Ã¥ÉÀßÄê"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"¤¢¤Ê¤¿¤Î¥·¥¹¥Æ¥à¤Ï¥Þ¥ë¥Á¥Ø¥Ã¥É¤ÎÀßÄ꤬¤Ç¤­¤Þ¤¹¡£\n"
-"¤É¤¦¤·¤Þ¤¹¤«¡©"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥«¡¼¥É"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥«¡¼¥É¤òÁªÂò¤·¤Æ²¼¤µ¤¤"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "X ¥µ¡¼¥Ð¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X ¥µ¡¼¥Ð"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "¤É¤Î¹½À®¤ÎXFree ¤Ë¤·¤Þ¤¹¤«"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"¤³¤Î¥«¡¼¥É¤ÏXFree %s ¤Ç¤Î¤ß3D¥¢¥¯¥»¥é¥ì¡¼¥·¥ç¥ó²Äǽ¤Ç¤¹¡£\n"
-"XFree %s ¤Ç¤Î¤³¤Î¥«¡¼¥É¤Î¥µ¥Ý¡¼¥È¤Ï¡¢2D ¤Î¤Û¤¦¤¬¤¹¤°¤ì¤Æ¤¤¤Þ¤¹¡£"
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "¤³¤Î¥«¡¼¥É¤ÏXFree %s ¤Ç3D¥¢¥¯¥»¥é¥ì¡¼¥·¥ç¥ó²Äǽ¤Ç¤¹¡£"
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "¥Ï¡¼¥É¥¦¥§¥¢3D¥¢¥¯¥»¥é¥ì¡¼¥·¥ç¥ó¤Ä¤­¤ÎXFree %s"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"¤³¤Î¥«¡¼¥É¤ÏXFree %s ¤Ç3D¥¢¥¯¥»¥é¥ì¡¼¥·¥ç¥ó²Äǽ¤Ç¤¹¡£\n"
-"¤¿¤À¤·¤¢¤¯¤Þ¤Ç¡¢¼Â¸³Åª¤Ê¥µ¥Ý¡¼¥È¤Ç¡¢¥Þ¥·¥ó¥Õ¥ê¡¼¥º¤Î²ÄǽÀ­¤¬¤¢¤ê¤Þ¤¹¡£"
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "¼Â¸³Ãʳ¬¤Î¥Ï¡¼¥É¥¦¥§¥¢3D¥¢¥¯¥»¥é¥ì¡¼¥·¥ç¥ó¤Ä¤­¤ÎXFree %s"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"¤³¤Î¥«¡¼¥É¤Ï¥Ï¡¼¥É3D¥¢¥¯¥»¥é¥ì¡¼¥·¥ç¥ó¤¬²Äǽ¤Ç¤¹¤¬¡¢XFree %s¤¬É¬ÍפǤ¹¡£\n"
-"¤¿¤À¤·¤¢¤¯¤Þ¤Ç¡¢¼Â¸³Åª¤Ê¥µ¥Ý¡¼¥È¤Ç¡¢¥Þ¥·¥ó¥Õ¥ê¡¼¥º¤Î²ÄǽÀ­¤¬¤¢¤ê¤Þ¤¹¡£\n"
-"XFree %s ¤Ç¤Î¤³¤Î¥«¡¼¥É¤Î¥µ¥Ý¡¼¥È¤Ï¡¢2D ¤Î¤Û¤¦¤¬¤¹¤°¤ì¤Æ¤¤¤Þ¤¹¡£"
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (¥¤¥ó¥¹¥È¡¼¥ë¥Ç¥£¥¹¥×¥ì¥¤¥É¥é¥¤¥Ð)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree¤ÎÀßÄê"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥«¡¼¥É¤Î¥á¥â¥ê¥µ¥¤¥º¤òÁªÂò¤·¤Æ²¼¤µ¤¤"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "¥µ¡¼¥Ð¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "¥â¥Ë¥¿¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "¥â¥Ë¥¿"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Âç»ö¤Ê¥Ñ¥é¥á¡¼¥¿¤¬2¤Ä¤¢¤ê¤Þ¤¹¡£¿âľ¥ê¥Õ¥ì¥Ã¥·¥å¥ì¡¼¥È(¥¹¥¯¥ê¡¼¥óÁ´ÂÎ\n"
-"¤òºÆÉÁ²è¤¹¤ë¼þ´ü)¤È¿åÊ¿¥ê¥Õ¥ì¥Ã¥·¥å¥ì¡¼¥È(ÁöººÀþ¤Îɽ¼¨¼þ´ü¡¤¤â¤Ã¤È¤â\n"
-"½ÅÍ×)¤Ç¤¹¡£\n"
-"\n"
-"*½ÅÍ×* ¥â¥Ë¥¿¤ÎµöÍÆÈÏ°ÏÆâ¤Î¿âľ¡¤¿åʿƱ´üÈϰϤò»ØÄꤷ¤Ê¤¤¤È¡¤\n"
-"¥â¥Ë¥¿¤¬¥À¥á¡¼¥¸¤ò¼õ¤±¤ë¤«¤âÃΤì¤Þ¤»¤ó¡£\n"
-"ʬ¤«¤é¤Ê¤¤¾ì¹ç¤Ï, Äã¤á¤ÎÀßÄê¤Ë¤·¤Æ²¼¤µ¤¤¡£"
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "¿åÊ¿¥ê¥Õ¥ì¥Ã¥·¥å¥ì¡¼¥È"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "¿âľ¥ê¥Õ¥ì¥Ã¥·¥å¥ì¡¼¥È"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "¥â¥Ë¥¿¤¬ÀßÄꤵ¤ì¤Æ¤Þ¤»¤ó"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥«¡¼¥É¤¬ÀßÄꤵ¤ì¤Æ¤Þ¤»¤ó"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "²òÁüÅÙ¤¬ÁªÂò¤µ¤ì¤Æ¤Þ¤»¤ó"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "¤³¤ÎÀßÄê¤Ç»î¤·¤Æ¤ß¤Þ¤¹¤«¡©"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"·Ù¹ð¡§¤³¤Î¥°¥é¥Õ¥£¥Ã¥¯¥«¡¼¥É¤ò¥Æ¥¹¥È¤¹¤ë¤È¥Þ¥·¥ó¤¬¥Õ¥ê¡¼¥º¤¹¤ë¤«¤â¤·¤ì¤Þ¤»¤ó"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "ÀßÄê¤ò»î¤·¤Þ¤¹"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"¤¤¤¯¤Ä¤«¥Ñ¥é¥á¡¼¥¿¤òÊѤ¨¤Æ¤ß¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "¥¨¥é¡¼È¯À¸"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "¤¢¤È %d ÉäÇÌá¤ê¤Þ¤¹"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "ÀßÄê¤Ï¤³¤ì¤Ç¤¤¤¤¤Ç¤¹¤«¡©"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "¥¨¥é¡¼È¯À¸¡¤¤¤¤¯¤Ä¤«¤Î¥Ñ¥é¥á¡¼¥¿¤òÊѤ¨¤Æ¤ß¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "²òÁüÅÙ"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "²òÁüÅ٤ȿ§¿¼ÅÙ"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥«¡¼¥É: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 ¥µ¡¼¥Ð: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "¥¨¥­¥¹¥Ñ¡¼¥È¥â¡¼¥É"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Á´¤Æ¤òɽ¼¨"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "²òÁüÅÙ"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "¥­¡¼¥Ü¡¼¥É¥ì¥¤¥¢¥¦¥È: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "¥Þ¥¦¥¹¤Î¼ïÎà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "¥Þ¥¦¥¹¥Ç¥Ð¥¤¥¹: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "¥â¥Ë¥¿: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "¥â¥Ë¥¿¿åʿƱ´ü: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "¥â¥Ë¥¿¿âľ¥ê¥Õ¥ì¥Ã¥·¥å: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥«¡¼¥É: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥«¡¼¥É id: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥á¥â¥ê: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "¿§¿¼ÅÙ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "²òÁüÅÙ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 ¥µ¡¼¥Ð: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ¥É¥é¥¤¥Ð: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "X Window System ¤ÎÀßÄê¤Î½àÈ÷"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "¤É¤¦¤·¤Þ¤¹¤«¡©"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "¥â¥Ë¥¿¤ÎÊѹ¹"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥«¡¼¥É¤ÎÊѹ¹"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "¥µ¡¼¥Ð¥ª¥×¥·¥ç¥ó¤ÎÊѹ¹"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "²òÁüÅÙ¤ÎÊѹ¹"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "¾ðÊó¤òɽ¼¨"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "¤â¤¦°ì²ó¥Æ¥¹¥È"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "½ªÎ»"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Êѹ¹¤òÊݸ¤·¤Þ¤¹¤«?\n"
-"¸½ºß¤ÎÀßÄê¤Ï°Ê²¼¤ÎÄ̤ê¤Ç¤¹:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Êѹ¹¤òÍ­¸ú¤Ë¤¹¤ë¤Ë¤Ï %s ¤Ë¥í¥°¥¤¥ó¤·¤Ê¤ª¤·¤Æ²¼¤µ¤¤"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "¥í¥°¥¢¥¦¥È¤·¤¿¾å¤Ç Ctrl-Alt-BackSpace ¤ò²¡¤·¤Æ²¼¤µ¤¤"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X ¤Îµ¯Æ°"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"¥³¥ó¥Ô¥å¡¼¥¿¤ò¥Ö¡¼¥È¤·¤¿»þ¡¤¼«Æ°Åª¤Ë X ¤¬Î©¤Á¾å¤¬¤ëÀßÄê¤Ë¤Ç¤­¤Þ¤¹¡£\n"
-"¥ê¥Ö¡¼¥È¤·¤¿»þ X ¤òΩ¤Á¾å¤²¤Þ¤¹¤«¡©"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ¿§(8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "3Ëü2À鿧 (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "6Ëü5À鿧 (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "1600Ëü¿§ (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "40²¯¿§ (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB °Ê¾å"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "¥¹¥¿¥ó¥À¡¼¥É VGA, 640x480 at 60Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "¥¹¡¼¥Ñ¡¼ VGA, 800x600 at 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 ¸ß´¹, 1024x768 at 87 Hz interlaced (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "¥¹¡¼¥Ñ¡¼ VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "³ÈÄ¥ ¥¹¡¼¥Ñ¡¼ VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "1024x768 at 60 Hz, 800x600 at 72 Hz¤Î¥Î¥ó¥¤¥ó¥¿¡¼¥ì¥¹SVGA"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "1280x1024 at 70 Hz¤ÎHigh Frequency SVGA"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "1280x1024 at 60 Hz¤¬²Äǽ¤Ê¥Þ¥ë¥Á¥¹¥­¥ã¥ó¥â¥Ë¥¿"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "1280x1024 at 74 Hz¤¬²Äǽ¤Ê¥Þ¥ë¥Á¥¹¥­¥ã¥ó¥â¥Ë¥¿"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "1280x1024 at 76 Hz¤¬²Äǽ¤Ê¥Þ¥ë¥Á¥¹¥­¥ã¥ó¥â¥Ë¥¿"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "1600x1200 at 70 Hz ¤¬²Äǽ¤Ê¥â¥Ë¥¿"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "1600x1200 at 76 Hz ¤¬²Äǽ¤Ê¥â¥Ë¥¿"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "¥Ö¡¼¥È¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ÎºÇ½é¤Î¥»¥¯¥¿"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "¥É¥é¥¤¥Ö¤ÎºÇ½é¤Î¥»¥¯¥¿ (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILO ¤Î¥¤¥ó¥¹¥È¡¼¥ë"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "¥Ö¡¼¥È¥í¡¼¥À¤ò¤É¤³¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "LILO/grub ¤Î¥¤¥ó¥¹¥È¡¼¥ë"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "¥Æ¥­¥¹¥È¥á¥Ë¥å¡¼ÈÇ LILO"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥á¥Ë¥å¡¼ÈÇ LILO"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "DOS/Windows¤«¤éµ¯Æ° (loadlin »ÈÍÑ)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "¥Ö¡¼¥È¥í¡¼¥À¤Î¥á¥¤¥ó¥ª¥×¥·¥ç¥ó"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "»ÈÍѤ¹¤ë¥Ö¡¼¥È¥í¡¼¥À"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "¥Ö¡¼¥È¥í¡¼¥À¤Î¥¤¥ó¥¹¥È¡¼¥ë"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "¥Ö¡¼¥È¥Ç¥Ð¥¤¥¹"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (¸Å¤¤ BIOS ¤Ç¤ÏÆ°¤«¤Ê¤¤)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "¥³¥ó¥Ñ¥¯¥È"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "¥³¥ó¥Ñ¥¯¥È"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "¥Ó¥Ç¥ª¥â¡¼¥É"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "¥Ç¥Õ¥©¥ë¥È¥¤¥á¡¼¥¸µ¯Æ°¤ÎÂÔ¤Á»þ´Ö"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "¥Ñ¥¹¥ï¡¼¥É"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "¥Ñ¥¹¥ï¡¼¥É (¤â¤¦°ìÅÙ)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "¥³¥Þ¥ó¥É¥é¥¤¥ó¥ª¥×¥·¥ç¥ó¤ÎÀ©¸Â"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "À©¸Â"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "³Æ¥Ö¡¼¥È»þ¤Ë /tmp °Ê²¼¤ò¾Ã¤¹"
-
-# added a \n to the translation to avoid that the dialog window
-# in which it appears to be tooooo laaaaarge
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr ""
-"ɬÍפʤéÀµ³Î¤ÊRAM¥µ¥¤¥º¤òÆþ¤ì¤Æ¤¯¤À¤µ¤¤\n"
-"¡Ê%d MB¤¬¸«¤Ä¤«¤ê¤Þ¤·¤¿¡Ë"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "¥Þ¥ë¥Á¥×¥í¥Õ¥¡¥¤¥ë¤òÍ­¸ú¤Ë"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Ram¥µ¥¤¥º¤òMB¤ÇÆþÎÏ"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"¡È¥³¥Þ¥ó¥É¥é¥¤¥ó¥ª¥×¥·¥ç¥ó¤ÎÀ©¸Â¡É¥ª¥×¥·¥ç¥ó¤Ï¥Ñ¥¹¥ï¡¼¥É¤¬¤Ê¤¤¤È\n"
-"Ìò¤Ë¤¿¤Á¤Þ¤»¤ó¡£"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "¤â¤¦°ìÅٻ¤Æ²¼¤µ¤¤"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "¥Ñ¥¹¥ï¡¼¥É¤¬°ìÃפ·¤Þ¤»¤ó"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "½é´ü²½¥á¥Ã¥»¡¼¥¸"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "¥ª¡¼¥×¥ó¥Õ¥¡¡¼¥à¥¦¥§¥¢¤Î¥Ç¥£¥ì¥¤"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "¥«¡¼¥Í¥ë¥Ö¡¼¥È¤Î¥¿¥¤¥à¥¢¥¦¥È"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "CD ¤«¤é¤Îµ¯Æ°¤òÍ­¸ú¤Ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "OF ¤«¤é¤Îµ¯Æ°¤òÍ­¸ú¤Ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "¥Ç¥Õ¥©¥ë¥È¤Î OS ¤Ï¡©"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"¥¨¥ó¥È¥ê¤Ï°Ê²¼¤Î¤È¤ª¤ê¤Ç¤¹¡£\n"
-"Äɲá¦Êѹ¹¤Ç¤­¤Þ¤¹¡£"
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "²Ã¤¨¤ë"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "½ªÎ»"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Êѹ¹"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "¤É¤Î¥¿¥¤¥×¤òÄɲä·¤Þ¤¹¤«"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "¾¤Î OS (SunOS¤Ê¤É...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "¾¤Î OS (MacOS¤Ê¤É...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "¾¤Î OS (¥¦¥£¥ó¥É¥¦¥º¤Ê¤É...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "¥¤¥á¡¼¥¸"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "¥ë¡¼¥È"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "ÄɲÃ"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Æɤ߽ñ¤­"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "¥Æ¡¼¥Ö¥ë"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "´í¸±"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "¥é¥Ù¥ë"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "¥Ç¥Õ¥©¥ë¥È"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd¥µ¥¤¥º"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "¥Ó¥Ç¥ª¤Ê¤·"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "¥¨¥ó¥È¥ê¤ò¾Ã¤¹"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "¶õÇò¤Î¥é¥Ù¥ë¤Ïµö¤µ¤ì¤Æ¤¤¤Þ¤»¤ó"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "¤³¤Î¥é¥Ù¥ë¤Ï¤¹¤Ç¤Ë»È¤ï¤ì¤Æ¤¤¤Þ¤¹"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s ¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¤¬¸«¤Ä¤«¤ê¤Þ¤·¤¿"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Ê̤Τâ¤Î¤Ï¤¢¤ê¤Þ¤¹¤«¡©"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "%s ¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¤Ï¤¢¤ê¤Þ¤¹¤«¡©"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "¤¤¤¤¤¨"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "¤Ï¤¤"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "¥Ï¡¼¥É¥¦¥§¥¢¤Î¾ðÊó¤ò¸«¤Æ²¼¤µ¤¤"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%s ¥«¡¼¥É %s ¤Î¥É¥é¥¤¥Ð¥¤¥ó¥¹¥È¡¼¥ëÃæ"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(¥â¥¸¥å¡¼¥ë %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "¤É¤Î %s ¥É¥é¥¤¥Ð¤ò»î¤·¤Þ¤·¤ç¤¦¤«¡©"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"%s ¥É¥é¥¤¥Ð¤Ï¡¢Àµ¤·¤¯Æ°ºî¤¹¤ë¤Î¤ËÆÃÊ̤ʾðÊó¤¬Íפë¾ì¹ç¤¬¤¢¤ê¤Þ¤¹¡£¤¿¤À¤·\n"
-"¤Õ¤Ä¤¦¤Ï¡¢¤Ê¤Ë¤â¤Ê¤·¤ÇÀµ¾ï¤ËÆ°¤¯¾ì¹ç¤¬¤Û¤È¤ó¤É¤Ç¤¹¡£ÆÃÊ̤ʥª¥×¥·¥ç¥ó¤ò\n"
-"»ØÄꤷ¤Þ¤¹¤«¡©¡¡¤½¤ì¤È¤â¥É¥é¥¤¥Ð¤Ë¥Þ¥·¥ó¤ò¥×¥í¡¼¥Ö¤µ¤»¤ÆɬÍ×¾ðÊó¤ò¼èÆÀ\n"
-"¤µ¤»¤Æ¤ß¤Þ¤¹¤«¡©¡¡¥×¥í¡¼¥ÖÃæ¤Ë¥³¥ó¥Ô¥å¡¼¥¿¤¬Ää»ß¤¹¤ë¤«¤âÃΤì¤Þ¤»¤ó¤¬¡¤\n"
-"¥Þ¥·¥ó¤¬¤³¤ï¤ì¤¿¤ê¤¹¤ë¤³¤È¤Ï¤¢¤ê¤Þ¤»¤ó¡£"
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "¥ª¡¼¥È¥×¥í¡¼¥Ö"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "¥ª¥×¥·¥ç¥ó»ØÄê"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "¥â¥¸¥å¡¼¥ë %s ¤Î¥ª¥×¥·¥ç¥ó¤ò»ØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"¥â¥¸¥å¡¼¥ë %s ¤Ø¤Î¥ª¥×¥·¥ç¥ó¤Î»ØÄê¡£\n"
-"¥ª¥×¥·¥ç¥ó¤Î¥Õ¥©¡¼¥Þ¥Ã¥È¤Ï¡È̾Á°=ÃÍ Ì¾Á°2=ÃÍ2 ...¡É¤Ç¤¹¡£\n"
-"Îã: ¡Èio=0x300 irq=7¡É"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "¥â¥¸¥å¡¼¥ë¤Î¥ª¥×¥·¥ç¥ó"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"¥â¥¸¥å¡¼¥ë %s ¤Î¥í¡¼¥É¤¬¤Ç¤­¤Þ¤»¤ó¤Ç¤·¤¿¡£\n"
-"¥Ñ¥é¥á¡¼¥¿¤òÊѤ¨¤Æ¤ä¤ê¤Ê¤ª¤·¤Æ¤ß¤Þ¤¹¤«¡©"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(¤¹¤Ç¤Ë %s ¤Ï²Ã¤ï¤Ã¤Æ¤¤¤Þ¤¹)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "¥Ñ¥¹¥ï¡¼¥É¤¬´Êñ¤¹¤®¤Þ¤¹"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "¥æ¡¼¥¶Ì¾¤òÍ¿¤¨¤Æ²¼¤µ¤¤"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "¥æ¡¼¥¶Ì¾¤Ë¤Ï±Ñ¾®Ê¸»ú¡¤¿ô»ú¡¢¡Ö-¡×¤ä¡Ö_¡×¤·¤«»È¤¨¤Þ¤»¤ó¡£"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "¤³¤Î¥æ¡¼¥¶Ì¾¤Ï¤¹¤Ç¤Ë¸ºß¤·¤Þ¤¹"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "¥æ¡¼¥¶¤òÄɲÃ"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"¥æ¡¼¥¶Ì¾¤òÆþÎϤ·¤Æ²¼¤µ¤¤\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "¼õ¤±ÉÕ¤±¤ë¥æ¡¼¥¶"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "¼ÂºÝ¤Î»á̾"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "¥æ¡¼¥¶Ì¾"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "¥·¥§¥ë"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "¥¢¥¤¥³¥ó"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "¼«Æ°¥í¥°¥¤¥ó"
-
-#: ../../any.pm_.c:757
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"¼«Æ°Åª¤ËÆÃÄê¥æ¡¼¥¶¤¬¥í¥°¥ª¥ó¤¹¤ë¤è¤¦¤Ë¥³¥ó¥Ô¥å¡¼¥¿¤òÀßÄê¤Ç¤­¤Þ¤¹¡£\n"
-"¤³¤Îµ¡Ç½¤ò»È¤¤¤Þ¤¹¤«¡©"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "¥Ç¥Õ¥©¥ë¥È¥æ¡¼¥¶¤ÎÁªÂò:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "»È¤¦¥¦¥£¥ó¥É¥¦¥Þ¥Í¡¼¥¸¥ã¤òÁª¤ó¤Ç²¼¤µ¤¤¡§"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "¤É¤Î¸À¸ì¤ò»È¤¦¤«Áª¤ó¤Ç¤¯¤À¤µ¤¤¤Í¡£"
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¸å»ÈÍѲÄǽ¤Ë¤Ê¤ë¤Û¤«¤Î¸À¸ì¤òÁªÂò¤Ç¤­¤Þ¤¹"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "¤¼¤ó¤Ö"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"%s operating system chooser-he youkosou!\n"
-"\n"
-"Ichiran kara erande <ENTER> wo oshimasu. %d byou de Default ni narimasu.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "GRUB operating system chooser-he youkosou!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "%c, %c key wo tukatte entry wo shitei shite kudasai."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Kono OS wo kidou suru nara Enter, Kidou mae no jikkou command"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "no henshuu niha 'e', command line nara 'c' wo oshi masu."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Sentaku shita OS ga %d byou de jidoutekini kidou shimasu."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "/boot ¤ÎÍÆÎÌÉÔ­¤Ç¤¹"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "¥Ç¥¹¥¯¥È¥Ã¥×"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "¥¹¥¿¡¼¥È¥á¥Ë¥å¡¼"
-
-#: ../../bootloader.pm_.c:972
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "¥Ö¡¼¥È¥í¡¼¥À¤Ï %s ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë¤Ï¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤­¤Þ¤»¤ó\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "¥Ø¥ë¥×¤Ï¤Þ¤À¼ÂÁõ¤µ¤ì¤Æ¤¤¤Þ¤»¤ó¡£\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "µ¯Æ°Êý¼°¤ÎÀßÄê"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/¥Õ¥¡¥¤¥ë(F)"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/¥Õ¥¡¥¤¥ë(F)/½ªÎ»(Q)"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "¿·¥¹¥¿¥¤¥ë¤ËʬÎव¤ì¤ë¥â¥Ë¥¿"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "¿·¥¹¥¿¥¤¥ë¥â¥Ë¥¿"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "¤Õ¤Ä¤¦¤Î¥â¥Ë¥¿"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "¤Õ¤Ä¤¦¤Î Gtk+ ¥â¥Ë¥¿"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "µ¯Æ°»þ¤ËAurora¤ò¼Â¹Ô"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub ¥â¡¼¥É"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"¤¤¤Þ¡¢¥Ö¡¼¥È¥Þ¥Í¡¼¥¸¥ã¤Ë¤Ï %s ¤ò¤ª»È¤¤¤Ç¤¹¡£\n"
-"ÀßÄꥦ¥£¥¶¡¼¥É¤òµ¯Æ°¤¹¤ë¤Ë¤Ï¡ÖÀßÄê¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£"
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "ÀßÄê"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "¥Ö¡¼¥È¥â¡¼¥É"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "¥·¥¹¥Æ¥à¥â¡¼¥É"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "µ¯Æ°»þ¤Ë X ¥¦¥£¥ó¥É¥¦¤ò¼Â¹Ô"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "¼«Æ°¥í¥°¥¤¥ó¤Ï¤·¤Ê¤¤"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "¤³¤Î (¥æ¡¼¥¶¡¢¥Ç¥¹¥¯¥È¥Ã¥×¡Ë¤Ç¼«Æ°¥í¥°¥¤¥ó¤¹¤ë"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "¥­¥ã¥ó¥»¥ë"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "/etc/inittab ¤¬ÆɤߤȤêÍѤ˳«¤±¤Þ¤»¤ó: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "LILO ¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ë¼ºÇÔ¤·¤Þ¤·¤¿¡£°Ê²¼¤Î¥¨¥é¡¼¤¬È¯À¸:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "¤¢¤È %d ʬ"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "¤¢¤È 1 ʬ"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "¤¢¤È %d ÉÃ"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "¥Ç¡¼¥¿¤Î¥Ð¥Ã¥¯¥¢¥Ã¥×¤ò¼è¤Ã¤Æ²¼¤µ¤¤"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "¤è¤¯Æɤó¤Ç²¼¤µ¤¤¡ª"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"¤â¤· aboot ¤ò»È¤¦¤Ä¤â¤ê¤Ê¤é¡¢¥Ç¥£¥¹¥¯¤ÎÀèƬ¤Ë¶õ¤­Îΰè (2048¥»¥¯¥¿¤¯¤é¤¤)\n"
-"¤ò»Ä¤¹¤è¤¦µ¤¤òÉÕ¤±¤Æ²¼¤µ¤¤¡£"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "¥¨¥é¡¼"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "¥¦¥£¥¶¡¼¥É"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "¿·µ¬"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "¥ê¥â¡¼¥È"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "¥ª¥×¥·¥ç¥ó"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "¥¿¥¤¥×"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "¥¢¥ó¥Þ¥¦¥ó¥È"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "¥Þ¥¦¥ó¥È"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Æ°ºî¤òÁªÂò"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"¥Ï¡¼¥É¥Ç¥£¥¹¥¯Á´ÂΤ¬Â礭¤Ê FAT ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó°ì¤Ä¤À¤±¤Ç¤¹¤Í\n"
-"¡Ê¤¿¤Ö¤óMS Dos/¥¦¥£¥ó¥É¥¦¥º¤Î¤â¤Î¤Ç¤¹¡Ë¡£\n"
-"¤Þ¤º¤Ï¤³¤¤¤Ä¤ò¥ê¥µ¥¤¥º¤¹¤ë¤Î¤¬¤¤¤¤¤Ç¤·¤ç¤¦\n"
-"¡Ê¤½¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¡¢¼¡¤Ë¡Ö¥ê¥µ¥¤¥º¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Æ²¼¤µ¤¤)"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Êѹ¹¤¹¤ë¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../diskdrake.pm_.c:240
-msgid "Please click on a media"
-msgstr "¥á¥Ç¥£¥¢¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../diskdrake.pm_.c:243
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr ""
-"¾å¤Î¥Ü¥¿¥ó¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤«\n"
-"\n"
-"\"New\"¤ò»È¤¤¤Þ¤¹"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr "\"New\"¤ò»È¤¤¤Þ¤¹"
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "¾ÜºÙ"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Journalised FS"
-msgstr "¥¸¥ã¡¼¥Ê¥ê¥ó¥°¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "¥¹¥ï¥Ã¥×"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "¶õ"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "¤½¤Î¾"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à ¥¿¥¤¥×:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "ºîÀ®"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Âå¤ï¤ê¤Ë¡È%s¡É¤ò»È¤Ã¤Æ²¼¤µ¤¤"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "ºï½ü"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "ºÇ½é¤Ë¡Ö¥¢¥ó¥Þ¥¦¥ó¥È¡×¤ò»È¤Ã¤Æ²¼¤µ¤¤"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Î·¿¤ò %s ¤ËÊѹ¹¤·¤¿¸å¡¢¤³¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¾å¤Î¥Ç¡¼¥¿¤Ï¼º¤ï¤ì¤Þ"
-"¤¹"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "¥Ç¥Ð¥¤¥¹ %s ¤ò¤É¤³¤Ë¥Þ¥¦¥ó¥È¤·¤Þ¤¹¤«¡©"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "¥Þ¥¦¥ó¥È¥ª¥×¥·¥ç¥ó"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "¤½¤Î¾"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "¥ê¥à¡¼¥Ð¥Ö¥ë¥á¥Ç¥£¥¢"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "¥¿¥¤¥×¤ÎÊѹ¹"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "¤É¤Î¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤Ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "nfs ¶¦Í­¥ê¥½¡¼¥¹¤Ç»È¤¨¤ë¤â¤Î¤ò¥¹¥­¥ã¥óÃæ"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "¥µ¡¼¥Ð %s ¤Î nfs ¶¦Í­¥ê¥½¡¼¥¹¤Ç»È¤¨¤ë¤â¤Î¤ò¥¹¥­¥ã¥óÃæ"
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr "¾å¤Î°ìÍ÷¤Ë´õ˾¤Î¥¨¥ó¥È¥ê¤¬¤Ê¤±¤ì¤Ð¤³¤³¤ËÆþÎϤ·¤Þ¤·¤ç¤¦:"
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "¥µ¡¼¥Ð"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "¶¦Í­¥ê¥½¡¼¥¹"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "samba ¶¦Í­¥ê¥½¡¼¥¹¤Ç»È¤¨¤ë¤â¤Î¤ò¥¹¥­¥ã¥óÃæ"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "¥µ¡¼¥Ð %s ¤Î samba ¶¦Í­¥ê¥½¡¼¥¹¤Ç»È¤¨¤ë¤â¤Î¤ò¥¹¥­¥ã¥óÃæ"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁªÂò"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Ê̤Υѡ¼¥Æ¥£¥·¥ç¥ó¤òÁª¤Ö"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "½ªÎ»"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "¥¨¥­¥¹¥Ñ¡¼¥È¥â¡¼¥É¤Ë°Ü¤ë"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "¥Î¡¼¥Þ¥ë¥â¡¼¥É¤Ë°Ü¤ë"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "¤â¤È¤ËÌ᤹"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "¤½¤ì¤Ç¤â³¤±¤Þ¤¹¤«¡©"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "¥»¡¼¥Ö¤»¤º½ªÎ»"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤ò¹¹¿·¤»¤º¤Ë½ªÎ»¡©"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr " /etc/fstab ¤ÎÊѹ¹¤òÊݸ¤·¤Þ¤¹¤«¡©"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "¼«Æ°³ä¤êÅö¤Æ"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Á´¤Æ¤ò¥¯¥ê¥¢"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "¼¡"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "¥Ï¡¼¥É¥É¥é¥¤¥Ö¤Î¾ðÊó"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "¼«Æ°³ä¤êÅö¤Æ¤¬¤Ç¤­¤ë¤Û¤É¶õ¤­ÍÆÎ̤¬¤¢¤ê¤Þ¤»¤ó"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Á´¤Æ¤Î¥×¥é¥¤¥Þ¥ê¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬»È¤ï¤ì¤Æ¤¤¤Þ¤¹"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "¤³¤ì°Ê¾å¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ÏÄɲäǤ­¤Þ¤»¤ó"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁý¤ä¤·¤¿¤¤¤Ê¤é¡¤³ÈÄ¥¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬\n"
-"ºî¤ì¤ë¤è¤¦¤Ë¤É¤³¤«¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¾Ã¤·¤Æ²¼¤µ¤¤¡£"
-
-#: ../../diskdrake_interactive.pm_.c:285
-msgid "Save partition table"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤òÊݸ"
-
-#: ../../diskdrake_interactive.pm_.c:286
-msgid "Restore partition table"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤òºÆÀ¸"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤ò»Ä¤¹"
-
-#: ../../diskdrake_interactive.pm_.c:289
-msgid "Reload partition table"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤òºÆÆɹþ"
-
-#: ../../diskdrake_interactive.pm_.c:293
-msgid "Removable media automounting"
-msgstr "¥ê¥à¡¼¥Ð¥Ö¥ë¥á¥Ç¥£¥¢¼«Æ°ºÆ¥Þ¥¦¥ó¥ÈÃæ"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "¥Õ¥¡¥¤¥ë¤òÁªÂò"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"¥Ð¥Ã¥¯¥¢¥Ã¥×¤¹¤ë¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤Î¥µ¥¤¥º¤¬°ã¤¤¤Þ¤¹\n"
-"³¤±¤Þ¤¹¤«¡©"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "·Ù¹ð"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"¥Õ¥í¥Ã¥Ô¡¼¤ò¥É¥é¥¤¥Ö¤ËÁÞÆþ¤·¤Æ¤¯¤À¤µ¤¤\n"
-"¥Õ¥í¥Ã¥Ô¡¼¾å¤ÎÁ´¤Æ¤Î¥Ç¡¼¥¿¤Ï¼º¤ï¤ì¤Þ¤¹"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤òµß½Ð¤·¤Æ¤ß¤Þ¤¹"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "¾ÜºÙ¤Ê¾ðÊó"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "¥ê¥µ¥¤¥º"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "°ÜÆ°"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "¥Õ¥©¡¼¥Þ¥Ã¥È"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "¥¢¥¯¥Æ¥£¥Ö"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "RAID ¤Ë²Ã¤¨¤ë"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "LVM ¤Ë²Ã¤¨¤ë"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "RAID ¤«¤é½ü¤¯"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "LVM ¤«¤é½ü¤¯"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "RAID¤ÎÊѹ¹"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "¥ë¡¼¥×¥Ð¥Ã¥¯¤Î»ÈÍÑ"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "¿·¤·¤¤¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òºîÀ®"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "³«»Ï¥»¥¯¥¿: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "MB ¤Ç¤Î¥µ¥¤¥º: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¥¿¥¤¥×: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "¥×¥ê¥Õ¥¡¥ì¥ó¥¹: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-msgid "Remove the loopback file?"
-msgstr "¥ë¡¼¥×¥Ð¥Ã¥¯¥Õ¥¡¥¤¥ë¤òºï½ü¤·¤Þ¤¹¤«¡©"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥¿¥¤¥×¤ÎÊѹ¹"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "ext2 ¤«¤é ext3 ¤ËÊѹ¹¤·¤Æ¤¤¤Þ¤¹"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "¥ë¡¼¥×¥Ð¥Ã¥¯¥Õ¥¡¥¤¥ë %s ¤ò¤É¤³¤Ë¥Þ¥¦¥ó¥È¤·¤Þ¤¹¤«¡©"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"¤³¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¥ë¡¼¥×¥Ð¥Ã¥¯¤Ç»È¤ï¤ì¤Æ¤¤¤ë¤Î¤Ç¡¢\n"
-"¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È¤«¤é¼è¤ê½¢¤¯¤³¤È¤¬½ÐÍè¤Þ¤»¤ó¡£\n"
-"¤Þ¤º¥ë¡¼¥×¥Ð¥Ã¥¯¤ò²ò½ü¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "fat ¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤Î¶­³¦¤ò·×»»"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "¥ê¥µ¥¤¥ºÃæ"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "¤³¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¥ê¥µ¥¤¥º¤Ç¤­¤Þ¤»¤ó"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "¤³¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¾å¤Î¥Ç¡¼¥¿¤Ï¥Ð¥Ã¥¯¥¢¥Ã¥×¤¹¤ë¤Ù¤­¤Ç¤¹"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "¥ê¥µ¥¤¥º¸å¤Ë¤Ï¡¢¥Ñ¡¼¥Æ¥£¥·¥ç¥ó %s ¾å¤Î¥Ç¡¼¥¿¤Ï¼º¤ï¤ì¤Þ¤¹"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "¿·¤·¤¤¥µ¥¤¥º¤òÁªÂò"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "MB ¤Ç¤Î¥µ¥¤¥º: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "¤É¤Î¥Ç¥£¥¹¥¯¤Ë°ÜÆ°¤·¤Þ¤¹¤«?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "¥»¥¯¥¿"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "¤É¤Î¥»¥¯¥¿¤ò°ÜÆ°¤·¤Þ¤¹¤«¡©"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "°ÜÆ°Ãæ"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò°ÜÆ°Ãæ..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Äɲ乤ë´û¸¤Î RAID ¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "¿·µ¬"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Äɲ乤ë´û¸¤Î LVM ¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "LVM ̾¤Ï¡©"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "¤³¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¥ë¡¼¥×¥Ð¥Ã¥¯¤Ë¤Ï»È¤¨¤Þ¤»¤ó"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "¥ë¡¼¥×¥Ð¥Ã¥¯"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "¥ë¡¼¥×¥Ð¥Ã¥¯¥Õ¥¡¥¤¥ë̾: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-msgid "Give a file name"
-msgstr "¥Õ¥¡¥¤¥ë̾¤òÆþÎÏ"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "¥Õ¥¡¥¤¥ë¤Ï¤¹¤Ç¤ËÊ̤Υ롼¥×¥Ð¥Ã¥¯¤Ç»ÈÍÑÃ档¾¤Î¤òÁª¤Ó¤Þ¤·¤ç¤¦"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "¥Õ¥¡¥¤¥ë¤Ï¤¹¤Ç¤Ë¸ºß¤·¤Þ¤¹¡£¤¤¤Þ¤¢¤ë¤Î¤ò»È¤¤¤Þ¤¹¤«¡©"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "¥Ç¥Ð¥¤¥¹"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "¥ì¥Ù¥ë"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "¥Á¥ã¥ó¥¯¥µ¥¤¥º"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Ãí°Õ: ¤³¤ÎÁàºî¤Ï´í¸±¤Ç¤¹¡£"
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "¤É¤ó¤Ê¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ç¤¹¤«¡©"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"¤´¤á¤ó¤Ê¤µ¤¤¡¤¤½¤³¤Ï¥É¥é¥¤¥Ö¤Î¤«¤Ê¤ê±ü¤Î¤Û¤¦(¥·¥ê¥ó¥À>1024)¤Ê¤Î¤Ç\n"
-"¤½¤³¤Ë /boot ¤Ïºî¤ì¤Þ¤»¤ó¡£/boot¤¬¤½¤³¤À¤È¡¢LILO ¤¬¤¦¤Þ¤¯Æ¯¤«¤Ê¤¤¤·¡¤\n"
-"LILO ¤ò»È¤ï¤Ê¤¤¤Ê¤é /boot ¤ÏÍפê¤Þ¤»¤ó¤«¤é"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"¤¤¤Þ¥ë¡¼¥È(/)ÍѤËÁª¤ó¤À¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¡¤ÊªÍýŪ¤Ë¥É¥é¥¤¥Ö¤ÎÀèƬ¤«¤é\n"
-"1024 ¥·¥ê¥ó¥À¤è¤ê±ó¤¯¤Ë¤¢¤Ã¤Æ¡¤¤µ¤é¤Ë¤¢¤Ê¤¿¤Ï/boot ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò\n"
-"»ý¤Ã¤Æ¤¤¤Þ¤»¤ó¤Í¡£LILO ¤ò¥Ö¡¼¥È¥Þ¥Í¡¼¥¸¥ã¤Ë»È¤¦¤Ê¤é¡¤/boot ¥Ñ¡¼¥Æ¥£\n"
-"¥·¥ç¥ó¤ÎÄɲäò¤ªËº¤ì¤Ê¤¯¡£"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"¤¢¤Ê¤¿¤Ï¥ë¡¼¥È(/)¤È¤È¤·¤Æ¥½¥Õ¥È¥¦¥§¥¢RAID¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁª¤Ó¤Þ¤·¤¿¤Í¡£\n"
-"/boot ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó̵¤·¤Ç¤³¤ì¤òÁàºî½ÐÍè¤ë¥Ö¡¼¥È¥í¡¼¥À¤Ï¤¢¤ê¤Þ¤»¤ó¡£\n"
-"¤Ç¤¹¤«¤é /boot ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ÎÄɲäò¤ªËº¤ì¤Ê¤¯¡£"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "¥É¥é¥¤¥Ö %s ¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤ò¥Ç¥£¥¹¥¯¤Ë½ñ¤­¹þ¤ß¤Þ¤¹¡ª"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "¥ê¥Ö¡¼¥È¤·¤Æ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤ÎÊѹ¹¤òÈ¿±Ç¤µ¤»¤ëɬÍפ¬¤¢¤ê¤Þ¤¹"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "¥Õ¥©¡¼¥Þ¥Ã¥È¤·¤¿¤é¡¢¥Ñ¡¼¥Æ¥£¥·¥ç¥ó %s ¾å¤Î¥Ç¡¼¥¿¤Ï¼º¤ï¤ì¤Þ¤¹¡£"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "¥Õ¥©¡¼¥Þ¥Ã¥ÈÃæ"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "¥ë¡¼¥×¥Ð¥Ã¥¯¥Õ¥¡¥¤¥ë %s ¤ò¥Õ¥©¡¼¥Þ¥Ã¥ÈÃæ"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó %s ¤ò¥Õ¥©¡¼¥Þ¥Ã¥ÈÃæ"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Hide files"
-msgstr "¥Õ¥¡¥¤¥ë¤ò±£¤¹"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Move files to the new partition"
-msgstr "¿·¤·¤¤¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë¥Õ¥¡¥¤¥ë¤ò°ÜÆ°"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"¥Ç¥£¥ì¥¯¥È¥ê %s ¤Ë¤Ï¤¹¤Ç¤Ë¥Ç¡¼¥¿¤¬¤¢¤ê¤Þ¤¹\n"
-"(%s)"
-
-#: ../../diskdrake_interactive.pm_.c:906
-msgid "Moving files to the new partition"
-msgstr "¿·¤·¤¤¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë¥Õ¥¡¥¤¥ë¤ò°ÜÆ°Ãæ"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr "%s ¥³¥Ô¡¼Ãæ"
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, c-format
-msgid "Removing %s"
-msgstr "%s ºï½üÃæ"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "¥Ç¥Ð¥¤¥¹: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS ¥Ç¥Ð¥¤¥¹¥ì¥¿¡¼: %s (¿äÄê)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "¥¿¥¤¥×: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "̾Á°: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "³«»Ï: ¥»¥¯¥¿ %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "¥µ¥¤¥º: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ¥»¥¯¥¿"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "¥·¥ê¥ó¥À %d ¤«¤é¥·¥ê¥ó¥À %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "¥Õ¥©¡¼¥Þ¥Ã¥ÈºÑ¤ß\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "̤¥Õ¥©¡¼¥Þ¥Ã¥È\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "¥Þ¥¦¥ó¥ÈºÑ¤ß\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"¥ë¡¼¥×¥Ð¥Ã¥¯¥Õ¥¡¥¤¥ë:\n"
-"   %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"¥Ç¥Õ¥©¥ë¥È¤Ç¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Ö¡¼¥È\n"
-"    (MS-DOS ¤Î¥Ö¡¼¥È, lilo ¤Ç¤Ï¤Ê¤¤)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "¥ì¥Ù¥ë %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "¥Á¥ã¥ó¥¯¥µ¥¤¥º %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID¥Ç¥£¥¹¥¯ %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "¥ë¡¼¥×¥Ð¥Ã¥¯¥Õ¥¡¥¤¥ë̾: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"¤³¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¤É¤¦¤â\n"
-"¥É¥é¥¤¥Ð¡¦¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤é¤·¤¤¤Ç¤¹¤è¡£\n"
-"¤¤¤¸¤é¤Ê¤¤¤Û¤¦¤¬¤¤¤¤¤Ç¤·¤ç¤¦¡£\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"¤³¤ÎÆÃÊÌ¤Ê Bootstrap\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¡¢\n"
-"¥Ç¥å¥¢¥ë¥Ö¡¼¥È¥·¥¹¥Æ¥àÍѤǤ¹¡£\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "¥µ¥¤¥º: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "¥¸¥ª¥á¥È¥ê: %s ¥·¥ê¥ó¥À, %s ¥Ø¥Ã¥É, %s ¥»¥¯¥¿\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "¾ðÊó: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM¥Ç¥£¥¹¥¯ %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¥¿¥¤¥×: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "¥Ð¥¹ %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "¥ª¥×¥·¥ç¥ó: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ¥Õ¥©¡¼¥Þ¥Ã¥È, %s ¼ºÇÔ"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "%s ¤ò ¥¿¥¤¥× %s ¤Ç¥Õ¥©¡¼¥Þ¥Ã¥È¤¹¤ëÊýË¡¤òÃΤê¤Þ¤»¤ó"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "¥Þ¥¦¥ó¥È¤Ë¼ºÇÔ"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck ¼ºÇÔ¡¢exit code  %d ¤Þ¤¿¤Ï signal %d"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "¥Þ¥¦¥ó¥È¤Ë¼ºÇÔ: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "%s ¤ò¥¢¥ó¥Þ¥¦¥ó¥ÈÃæ¤Ë¥¨¥é¡¼: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "´Êñ¤Ë"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "¥µ¡¼¥Ð"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "16MB°Ê²¼¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë JFS ¤Ï»È¤¨¤Þ¤»¤ó"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "32MB°Ê²¼¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë ReiserFS ¤Ï»È¤¨¤Þ¤»¤ó"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È¤Ï / ¤Ç»Ï¤Þ¤ëɬÍפ¬¤¢¤ê¤Þ¤¹"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È %s ¤Ë¥Þ¥¦¥ó¥ÈºÑ¤ß\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "LVM ÏÀÍý¥Ü¥ê¥å¡¼¥à¤Ï¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È %s ¤Ë¤Ï»È¤¨¤Þ¤»¤ó"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "¤³¤Î¥Ç¥£¥ì¥¯¥È¥ê¤Ï root ¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥àÆâ¤Ë»Ä¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"¤³¤Î¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È¤Ë¤Ï¡¢¼Âºß¤¹¤ë¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à (ext2, reiserfs) \n"
-"¤¬É¬ÍפǤ¹¡£\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "½ñ¤­¹þ¤ß¤Î¤¿¤á %s ¤ò³«¤¯¤È¤­¥¨¥é¡¼¤¬È¯À¸: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"¥¨¥é¡¼È¯À¸ - ¿·¤·¤¤¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤ò¹½ÃۤǤ­¤ë¤è¤¦¤Ê¥Ç¥Ð¥¤¥¹¤¬\n"
-"¸«ÉÕ¤«¤ê¤Þ¤»¤ó¡£¤Ê¤Ë¤¬¸¶°ø¤«¡¢¥Ï¡¼¥É¥¦¥§¥¢¤ò¥Á¥§¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux ¤Ï¥Þ¥ë¥Á¥æ¡¼¥¶¥·¥¹¥Æ¥à¤Ç¤¹¡£¤Ä¤Þ¤ê³Æ¥æ¡¼¥¶¤Ï¼«Ê¬¤Î¹¥¤­¤ÊÀßÄê¤ä\n"
-"¥Õ¥¡¥¤¥ë¤ò¤â¤Æ¤Þ¤¹¡£¾Ü¤·¤¯¤Ï¡¢¥æ¡¼¥¶¡¼¥¬¥¤¥É¤òÆɤó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"¤Ç¤â´ÉÍý¼Ô¤Ç¤¢¤ë root ¤È¤Ï¤Á¤¬¤Ã¤Æ¡¢¤¢¤Ê¤¿¤¬¤³¤³¤ÇÄɲ乤ë¥æ¡¼¥¶¤Ï¡¢¼«Ê¬\n"
-"¤Î¥Õ¥¡¥¤¥ë¤È¼«Ê¬¤ÎÀßÄê°Ê³°¤Î¤â¤Î¤ÏÊѤ¨¤ë¸¢¸Â¤¬¤¢¤ê¤Þ¤»¤ó¡£¼«Ê¬ÍѤ˾¯¤Ê¤¯\n"
-"¤È¤â°ì¤Ä°ìÈ̥桼¥¶¤òºî¤Ã¤Æ¤¯¤À¤µ¤¤¡£¤Õ¤Ä¤¦»È¤¦¤È¤­¤Ë¤Ï¡¢¤½¤Î¥¢¥«¥¦¥ó¥È¤ò\n"
-"»È¤¤¤Þ¤¹¡£ËèÆü root ¤Ç¥í¥°¥¤¥ó¤¹¤ë¤È¼ê´Ö¤Ï¾Ê¤±¤Þ¤¹¤¬¡¢¤È¤Ã¤Æ¤â´í¸±¤Ç¤¹!\n"
-"¤Á¤ç¤Ã¤È¤·¤¿¤Þ¤Á¤¬¤¤¤Ç¥·¥¹¥Æ¥à¤¬Æ°¤«¤Ê¤¯¤Ê¤ê¤«¤Í¤Þ¤»¤ó¡£¤â¤·°ìÈ̥桼¥¶¤Ç\n"
-"Çɼê¤Ê¥ß¥¹¤ò¤·¤Æ¤â¡¢°ìÉô¾ðÊó¤ò¼º¤¦¤«¤â¤·¤ì¤Þ¤»¤ó¤¬¡¢¥·¥¹¥Æ¥àÁ´ÂΤˤϱƶÁ\n"
-"¤·¤Þ¤»¤ó¡£\n"
-"\n"
-"¤Þ¤º¡¢ËÜ̾¤òÆþ¤ì¤Þ¤¹¡£¤³¤ì¤Ïɬ¤º¤·¤âɬÍפ¢¤ê¤Þ¤»¤ó¡£¼ÂºÝ¤Ë¤Ï¹¥¤­¤Ê¤â¤Î¤ò\n"
-"Æþ¤ì¤é¤ì¤Þ¤¹¡£¤¹¤ë¤È drakX ¤Ï¤¢¤Ê¤¿¤ÎÆþÎϤ·¤¿ºÇ½é¤Îñ¸ì¤ò¤È¤Ã¤Æ¡¢¤½¤ì¤ò\n"
-"¥æ¡¼¥¶Ì¾¤Ç»È¤¤¤Þ¤¹¡£¤³¤ì¤Ï¡¢¤½¤Î¥æ¡¼¥¶¤¬¥·¥¹¥Æ¥à¤Ë¥í¥°¥ª¥ó¤¹¤ë¤È¤­¤Î̾Á°\n"
-"¤Ë¤Ê¤ê¤Þ¤¹¡£¤³¤ì¤ÏÊѤ¨¤ë¤³¤È¤â¤Ç¤­¤Þ¤¹¡£¤½¤ì¤«¤é¥Ñ¥¹¥ï¡¼¥É¤òÆþÎϤ·¤Þ¤¹¡£\n"
-"Æø¢¤Ê¤·¤Î¡Ê°ìÈ̡˥桼¥¶¤Î¥Ñ¥¹¥ï¡¼¥É¤Ï¡¢¥»¥­¥å¥ê¥Æ¥£¤Î´ÑÅÀ¤«¤é¤Ï root ¤Î\n"
-"¥Ñ¥¹¥ï¡¼¥É¤Û¤É½ÅÍפǤϤ¢¤ê¤Þ¤»¤ó¤¬¡¢¤À¤«¤é¤È¤¤¤Ã¤Æ°Â°×¤Ê¤³¤È¤Ï¤·¤Ê¤¤¤Ç¤¯\n"
-"¤À¤µ¤¤¡£¤¢¤Ê¤¿¤Î¥Õ¥¡¥¤¥ë¤¬´í¸±¤Ë¤µ¤é¤µ¤ì¤Þ¤¹¡£\n"
-"\n"
-"¡Ö¥æ¡¼¥¶¤òÄɲáפò¥¯¥ê¥Ã¥¯¤·¤¿¤é¡¢¹¥¤­¤Ê¤À¤±¥æ¡¼¥¶¤òÄɲäǤ­¤Þ¤¹¡£Ãç´Ö¤Î\n"
-"¤½¤ì¤¾¤ì¤Ë¥¢¥«¥¦¥ó¥È¤ò¤Ä¤¯¤ê¤Þ¤·¤ç¤¦¡£¤ªÉ㤵¤ó¤äËå¤Îʬ¤Ç¤â¡£¹¥¤­¤Ê¤À¤±¤Î\n"
-"¥æ¡¼¥¶¤òÄɲä·½ª¤¨¤¿¤é¡¢¡Ö´°Î»¡×¤ò²¡¤·¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"¡Ö¹âÅÙ¤ÊÁªÂò¡×¥Ü¥¿¥ó¤ò²¡¤¹¤È¡¢¤½¤Î¥æ¡¼¥¶¤Î¥Ç¥Õ¥©¥ë¥È¤Î¥·¥§¥ë¤òÊѤ¨¤é¤ì¤Þ\n"
-"¤¹¡Ê¥Ç¥Õ¥©¥ë¥È¤Ï bash¡Ë"
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"¥Ï¡¼¥É¥Ç¥£¥¹¥¯¾å¤Ë¸¡½Ð¤µ¤ì¤¿¡¢´û¸¤Î Linux ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¾å¤Ë\n"
-"¼¨¤·¤Þ¤¹¡£¥¦¥£¥¶¡¼¥É¤ÎÁªÂò¤ò¤½¤Î¤Þ¤Þ¤Ë¤·¤Æ¤ª¤¤¤Æ¤â¤¤¤¤¤Ç¤·¤ç¤¦¡£\n"
-"Ä̾ï¤ÎÍøÍѤˤÏÌäÂꤢ¤ê¤Þ¤»¤ó¡£ÁªÂò¤òÊѤ¨¤¿¤é¡¢ºÇÄã¤Ç¤â root\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¡Ê¡Ö/¡×¡Ë¤ò»ØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£¤¢¤Þ¤ê¾®¤µ¤¤¥Ñ¡¼¥Æ¥£¥·¥ç¥ó\n"
-"¤ò¤³¤³¤ÇÁª¤Ö¤È¡¢¥½¥Õ¥È¤¬Æþ¤êÀÚ¤é¤Ê¤¯¤Ê¤ê¤Þ¤¹¤è¡£¤Þ¤¿¡¢¥Ç¡¼¥¿¤òÊ̤Î\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ëµ¯¤­¤¿¤±¤ì¤Ð¡¢¡Ö/home¡×¤â»ØÄꤷ¤Þ¤·¤ç¤¦¡Ê¤³¤ì¤Ï¡¢\n"
-"Linux ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬Ê£¿ô¤Ê¤¤¤ÈÉÔ²Äǽ¤Ç¤¹¤¬¡Ë¡£\n"
-"\n"
-"\n"
-"¤Á¤Ê¤ß¤Ë³Æ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï°Ê²¼¤Î½ñ¼°¤Çµó¤¬¤Ã¤Æ¤¤¤Þ¤¹: ¡Ö̾Á°¡×¡ÖÍÆÎÌ¡×\n"
-"\n"
-"\n"
-"¡Ö̾Á°¡×¤Ï¼¡¤Î½ñ¼°¤Ç¤¹: ¡Ö¥Ï¡¼¥É¥Ç¥£¥¹¥¯¼ïÎà¡×¡Ö¥É¥é¥¤¥ÖÈÖ¹æ¡×\n"
-"¡Ö¥Ñ¡¼¥Æ¥£¥·¥ç¥óÈÖ¹æ¡×¡Ê¤¿¤È¤¨¤Ð¡Öhda1¡×)\n"
-"\n"
-"\n"
-"¡Ö¥Ï¡¼¥É¥Ç¥£¥¹¥¯¼ïÎà¡×¤Ï¡¢IDE ¥Ç¥£¥¹¥¯¤Ê¤é¡Öhd¡×¤Ç¡¢SCSI ¤Ê¤é¡Ösd¡×\n"
-"¤Ç¤¹¡£\n"
-"\n"
-"\n"
-"¡Ö¥É¥é¥¤¥ÖÈÖ¹æ¡×¤Ï¡¢¡Öhd¡×¤ä¡Ösd¡×¤Î¸å¤Ë¤Ä¤¯Ê¸»ú¤Ç¤¹¡£IDE¤Ê¤é:\n"
-"\n"
-"   * ¡Öa¡×¤Ï¥×¥é¥¤¥Þ¥ê¥³¥ó¥È¥í¡¼¥é¾å¤Î¥Þ¥¹¥¿¥Ç¥£¥¹¥¯\n"
-"\n"
-"   * ¡Öb¡×¤Ï¥×¥é¥¤¥Þ¥ê¥³¥ó¥È¥í¡¼¥é¾å¤Î¥¹¥ì¡¼¥Ö¥Ç¥£¥¹¥¯\n"
-"\n"
-"   * ¡Öc¡×¤Ï¥»¥«¥ó¥À¥êIDE¥³¥ó¥È¥í¡¼¥é¾å¤Î¥Þ¥¹¥¿¥Ç¥£¥¹¥¯\n"
-"\n"
-"   * ¡Öd¡×¤Ï¥»¥«¥ó¥À¥êIDE¥³¥ó¥È¥í¡¼¥é¾å¤Î¥¹¥ì¡¼¥Ö¥Ç¥£¥¹¥¯\n"
-"\n"
-"\n"
-"SCSI ¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Î¾ì¹ç¡¢¡Öa¡×¤¬SCSI IDÈÖ¹æºÇ¾®¤Î¥Ç¥£¥¹¥¯¡¢\n"
-"¡Öb¡×¤Ï¤½¤Î¼¡¤ÎIDÈֹ桢¤È¤¤¤¦¶ñ¹ç¤Ç¤¹"
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux ¥¤¥ó¥¹¥È¡¼¥ë¤ÏCDROM¿ôËç¤Ë¤Þ¤¿¤¬¤ê¤Þ¤¹¡£DrakX\n"
-"¤Ï¡¢Áª¤ó¤À¥Ñ¥Ã¥±¡¼¥¸¤¬Ê̤ÎCDROM¾å¤Ë¤¢¤ë¤È¤­¤Ï¡¢¤¤¤Þ¤ÎCD¤ò\n"
-"ÅǤ­½Ð¤·¤Æ¡¢É¬ÍפÊÊ̤ΠCD ¤òÆþ¤ì¤ë¤è¤¦Í׵ᤷ¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"¤Ç¤Ï¡¢¥·¥¹¥Æ¥à¤Ë¤É¤ó¤Ê¥½¥Õ¥È¤ò¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¤«»ØÄꤷ¤Þ¤·¤ç¤¦¡£\n"
-"Mandrake Linux ¤Ç»È¤¨¤ë¥½¥Õ¥È¤Ï²¿Àé¤È¤¢¤ê¤Þ¤¹¤·¡¢Á´Éô¤ò³Ð¤¨¤é¤ì¤ë¿Í¤Ï\n"
-"¤¤¤Þ¤»¤ó¡£\n"
-"\n"
-"CDROM ¤«¤é¤Îɸ½à¥¤¥ó¥¹¥È¡¼¥ë¤ò¤·¤Æ¤¤¤ë¤Ê¤é¡¢¤Þ¤º¼ê»ý¤Á¤ÎCD¤ò¶µ¤¨¤ë¤è¤¦\n"
-"¸À¤ï¤ì¤Þ¤¹¡£¼ê»ý¤ÁCD¤Î¥é¥Ù¥ë¤òÄ´¤Ù¤Æ¡¢¥¤¥ó¥¹¥È¡¼¥ëÍѤ˻Ȥ¨¤ëCD¤Î¥Á¥§¥Ã¥¯\n"
-"¥Ü¥Ã¥¯¥¹¤ò¥Ï¥¤¥é¥¤¥È¤·¤Þ¤·¤ç¤¦¡£Á´Éô¤¹¤ó¤À¤éOK¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤¹¡£\n"
-"\n"
-"¥Ñ¥Ã¥±¡¼¥¸¤Ï¡¢¥Þ¥·¥ó¤Î»È¤¤Êý¤Ë±þ¤¸¤Æ¥°¥ë¡¼¥×¤´¤È¤Ë¤Þ¤È¤á¤é¤ì¤Æ¤¤¤Þ¤¹¡£\n"
-"¥°¥ë¡¼¥×¼«ÂΤ⣴¤Ä¤ÎÉôʬ¤ÇÀ°Íý¤µ¤ì¤Æ¤¤¤Þ¤¹:\n"
-"\n"
-" * ¥ï¡¼¥¯¥¹¥Æ¡¼¥·¥ç¥ó: ¥ï¡¼¥¯¥¹¥Æ¡¼¥·¥ç¥ó¤È¤·¤Æ¥Þ¥·¥ó¤ò»È¤¦¤Ê¤é¡¢°Ê²¼¤Î\n"
-"¥°¥ë¡¼¥×¤Ç»È¤¦¤â¤Î¤òÁ´ÉôÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-" * ¥°¥é¥Õ¥£¥Ã¥¯´Ä¶­: ¤³¤³¤Ç¤Ï¹¥¤ß¤Î¥°¥é¥Õ¥£¥Ã¥¯´Ä¶­¤òÁª¤Ó¤Þ¤¹¡£\n"
-"¥°¥é¥Õ¥£¥Ã¥¯¥ï¡¼¥¯¥¹¥Æ¡¼¥·¥ç¥ó¤¬¤Û¤·¤±¤ì¤Ð¡¢ºÇÄã°ì¤Ä¤ÏÁª¤Ó¤Þ¤·¤ç¤¦!\n"
-"\n"
-" * ³«È¯: ¥Þ¥·¥ó¤ò¥×¥í¥°¥é¥ß¥ó¥°¤Ë»È¤¦¤Ê¤é¡¢°Ê²¼¤«¤é¤Û¤·¤¤¥°¥ë¡¼¥×¤ò\n"
-"¤¤¤¯¤Ä¤Ç¤âÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-" * ¥µ¡¼¥Ð: ºÇ¸å¤Ë¡¢¤³¤ì¤¬¥µ¡¼¥ÐÍÑ¥Þ¥·¥ó¤Ë¤Ê¤ë¤Ê¤é¡¢¥Þ¥·¥ó¤Ë¥¤¥ó¥¹\n"
-"¥È¡¼¥ë¤·¤¿¤¤°ìÈÌŪ¤Ê¥µ¡¼¥Ó¥¹¤ò¤³¤³¤ÇÁª¤Ù¤Þ¤¹¡£\n"
-"\n"
-"¥Þ¥¦¥¹¤Î¥«¡¼¥½¥ë¤ò¥°¥ë¡¼¥×̾¾å¤ËÆ°¤«¤¹¤È¡¢¤½¤Î¥°¥ë¡¼¥×¤Ë¤Ä¤¤¤Æ¤Îû¤¤\n"
-"ÀâÌÀ¤¬¤Ç¤Þ¤¹¡£\n"
-"\n"
-"¡Ö¹âÅÙ¤ÊÁªÂò¡×¥Ü¥¿¥ó¤ò²¡¤¹¤È¡¢¡Ö¸ÄÊ̥ѥ屡¼¥¸¤ÎÁªÂò¡×¥ª¥×¥·¥ç¥ó\n"
-"¤¬»È¤¨¤ë¤è¤¦¤Ë¤Ê¤ê¤Þ¤¹¡£Ä󶡤µ¤ì¤Æ¤¤¤ë¥Ñ¥Ã¥±¡¼¥¸¤ò½ÏÃΤ·¤Æ¤¤¤ë¤«¡¢\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤ë¤â¤Î¤ò´°Á´¤ËÇÄ°®¤·¤¿¤±¤ì¤Ð¤³¤ì¤ò»È¤¤¤Þ¤¹¡£\n"
-"\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¤ò¡Ö¹¹¿·¡×¥â¡¼¥É¤Ç³«»Ï¤·¤¿¤é¡¢Á´¥°¥ë¡¼¥×¤òÈóÁªÂò¤Ë¤¹¤ë\n"
-"¤È¿·¤·¤¤¥Ñ¥Ã¥±¡¼¥¸¤ÏÆþ¤ì¤º¤Ë¡¢´û¸¥·¥¹¥Æ¥à¤Î½¤Éü¹¹¿·¤ò¤¹¤ë¤À¤±¤Ë¤Ê\n"
-"¤ê¤Þ¤¹¡£\n"
-"\n"
-"ºÇ¸å¤Ë¡¢¸ÄÊ̥ѥ屡¼¥¸¤òÁª¤ó¤À¾ì¹ç¤Ë¤Ï¡¢¤¹¤Ù¤Æ¤Î¥Ñ¥Ã¥±¡¼¥¸¤ò¥°¥ë¡¼¥×\n"
-"¤È¥µ¥Ö¥°¥ë¡¼¥×Ê̤ˤޤȤ᤿¥Ä¥ê¡¼¤¬É½¼¨¤µ¤ì¤Þ¤¹¡£¤³¤Î¥Ä¥ê¡¼¤ò¸«¤Ê¤¬¤é\n"
-"¥°¥ë¡¼¥×´Ý¤´¤È¡¢¥µ¥Ö¥°¥ë¡¼¥×´Ý¤´¤È¡¢¥Ñ¥Ã¥±¡¼¥¸¸ÄÊ̤ËÄɲúï½ü¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"¥Ä¥ê¡¼¤Î¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤Ö¤È¡¢¤½¤ÎÀâÌÀ¤¬±¦¤Ë½Ð¤Þ¤¹¡£\n"
-"ÁªÂò¤¬½ª¤ï¤Ã¤¿¤é¡Ö¥¤¥ó¥¹¥È¡¼¥ë¡×¥Ü¥¿¥ó¤ò²¡¤·¤Þ¤·¤ç¤¦¡£¥¤¥ó¥¹¥È¡¼¥ë¤¬\n"
-"»Ï¤Þ¤ê¤Þ¤¹¡£¥Ñ¥Ã¥±¡¼¥¸¤ò¤¿¤¯¤µ¤óÁª¤ó¤À¿Í¤Ï¡¢»þ´Ö¤¬¤«¤«¤ë¤Î¤Ç¤ªÃã¤Ç¤â\n"
-"¤É¤¦¤¾¡£\n"
-"\n"
-"!! ¥µ¡¼¥Ð¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤ó¤À¤é¡¢¤½¤ì¤¬°Õ¿ÞŪ¤Ç¤â²¿¤«¥°¥ë¡¼¥×¤Î°ìÉô\n"
-"¤Ç¤â¡¢ËÜÅö¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤¤¤«³Îǧ¤òµá¤á¤é¤ì¤Þ¤¹¡£Mandrake Linux\n"
-"¤Ç¤Ï¡¢¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¥µ¡¼¥Ð¤Ïµ¯Æ°»þ¤Ë¥Ç¥Õ¥©¥ë¥È¤Çµ¯Æ°¤µ¤ì¤Þ¤¹¡£\n"
-"½Ð²Ù»þ¤Ë¤Ï°ÂÁ´¤Ç¤â¡¢¸å¤«¤é¥»¥­¥å¥ê¥Æ¥£¥Û¡¼¥ë¤¬¸«¤Ä¤«¤ë¤³¤È¤â¤¢¤ê\n"
-"¤Þ¤¹¡£¶ñÂÎŪ¤Ë¤Ï¡¢¤â¤·¤½¤ì¤¬¤É¤ó¤Ê¥µ¡¼¥Ó¥¹¤«¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢¡ÖNo¡×¤ò\n"
-"¥¯¥ê¥Ã¥¯¤¹¤ì¤Ð¤¤¤¤¤Ç¤·¤ç¤¦¡£¡ÖYes¡×¤ò¥¯¥ê¥Ã¥¯¤·¤¿¤é¡¢¥Ç¥Õ¥©¥ë¥È¤Ç\n"
-"Í­¸ú¤Ë¤Ê¤ê¤Þ¤¹¡£ !!\n"
-"\n"
-"¼«Æ°°Í¸´Ø·¸¥ª¥×¥·¥ç¥ó¤Ï¡¢¤¢¤Ê¤¿¤ÎÁªÂò¤·¤¿¥Ñ¥Ã¥±¡¼¥¸¤òÍ­¸ú¤Ë¤¹¤ë¤¿¤á¤Ë¡¢\n"
-"¥¤¥ó¥¹¥È¡¼¥é¤¬¼«Æ°Åª¤Ë¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤ó¤À¤È¤­¤Ë½Ð¤ë·Ù¹ð¤ò¾Ã¤¹¤À¤±¤Ç¤¹¡£"
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"ºÇ¸å¤Ë¡¢¡Ö¸ÄÊ̥ѥ屡¼¥¸¤ÎÁªÂò¡×¤òÁª¤ó¤À¤«¤É¤¦¤«¤Ë¤è¤Ã¤Æ¤Ï\n"
-"¤¹¤Ù¤Æ¤Î¥Ñ¥Ã¥±¡¼¥¸¤¬¥°¥ë¡¼¥×¤´¤È¤ËʬÎव¤ì¤Æ¥Ä¥ê¡¼É½¼¨¤µ¤ì¤Þ¤¹¡£\n"
-"¤³¤Î¥Ä¥ê¡¼¤ò¸«¤Ê¤¬¤é¡¢¥°¥ë¡¼¥×¤ä¥µ¥Ö¥°¥ë¡¼¥×ñ°Ì¡¢¤Þ¤¿¤Ï¸ÄÊÌ\n"
-"¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤ó¤À¤ê½ü³°¤·¤¿¤ê¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"¥Ä¥ê¡¼¤Î¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤Ö¤È¡¢±¦¤Ë¤½¤ÎÀâÌÀ¤¬½Ð¤Þ¤¹¡£Áª¤Ó½ª¤ï¤Ã¤¿¤é\n"
-"¡Ö¥¤¥ó¥¹¥È¡¼¥ë¡×¥Ü¥¿¥ó¤ò²¡¤·¤Þ¤·¤ç¤¦¡£¥¤¥ó¥¹¥È¡¼¥ë¤¬»Ï¤Þ¤ê¤Þ¤¹¡£\n"
-"¥Ï¡¼¥É¥¦¥§¥¢¤Î®ÅÙ¤ÈÁª¤ó¤À¥Ñ¥Ã¥±¡¼¥¸¤Î¿ô¤Ë¤è¤Ã¤Æ¤Ï¡¢¥¤¥ó¥¹¥È¡¼¥ë\n"
-"´°Î»¤Þ¤Ç¤Ë¤«¤Ê¤ê»þ´Ö¤¬¤«¤«¤ê¤Þ¤¹¡£´°Î»¤Þ¤Ç¤Î¿äÄê»þ¹ï¤¬É½¼¨¤µ¤ì¤ë\n"
-"¤Î¤Ç¡¢¤½¤ì¤ò¸«¤Æ¤Ê¤ó¤Ç¤·¤¿¤é¤ªÃã¤Ç¤â¤É¤¦¤¾¡£\n"
-"\n"
-"!! ¥µ¡¼¥Ð¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤ó¤À¤ê¡¢¤¢¤ë¤¤¤Ï¤½¤ì¤¬¤É¤³¤«¤Î¥°¥ë¡¼¥×¤Ë\n"
-"´Þ¤Þ¤ì¤Æ¤¤¤¿¾ì¹ç¤Ë¤Ï¡¢¤½¤Î¥µ¡¼¥Ð¤òËÜÅö¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤¤¤«¡¢\n"
-"³Îǧ¤òµá¤á¤é¤ì¤Þ¤¹¡£Mandrake Linux¤Ç¤Ï¡¢¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤¿¥µ¡¼¥Ð\n"
-"¤Ï¥Ç¥Õ¥©¥ë¥È¤Çµ¯Æ°»þ¤Ë¤¿¤Á¤¢¤¬¤ê¤Þ¤¹¡£¤³¤Î¥Ç¥£¥¹¥È¥ê¥Ó¥å¡¼¥·¥ç¥ó\n"
-"½Ð²Ù»þ¤Ë¤Ï°ÂÁ´¤ÇÌäÂ꤬ÃΤé¤ì¤Æ¤¤¤Ê¤¯¤Æ¤â¡¢¤³¤Î¥Ð¡¼¥¸¥ç¥ó´°À®¸å¤Ë\n"
-"¥»¥­¥å¥ê¥Æ¥£¥Û¡¼¥ë¤¬¸«¤Ä¤«¤ë¤«¤â¤·¤ì¤Þ¤»¤ó¡£¤â¤·¤½¤Î¥µ¡¼¥Ó¥¹¤¬²¿¤Î\n"
-"¤¿¤á¤Î¤â¤Î¤«¡¢¤Ê¤¼¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤ë¤Î¤«¤¬¤ï¤«¤é¤Ê¤±¤ì¤Ð¡Ö¤¤¤¤¤¨¡×\n"
-"¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£¡Ö¤Ï¤¤¡×¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤È¡¢°ìÍ÷¤Î¥µ¡¼¥Ó¥¹¤Ï\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Æ¡¢¥Ç¥Õ¥©¥ë¥È¤Çµ¯Æ°»þ¤Ë¤¿¤Á¤¢¤¬¤ê¤Þ¤¹¡£ !!\n"
-"\n"
-"¡Ö°Í¸´Ø·¸¤Î¼«Æ°²ò·è¡×¥ª¥×¥·¥ç¥ó¤òÁª¤Ö¤È¡¢¥¤¥ó¥¹¥È¡¼¥é¤¬¼«Æ°Åª¤Ë\n"
-"¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤ó¤À¤È¤­¤Ë¤â·Ù¹ð¥À¥¤¥¢¥í¥°¤¬½Ð¤Þ¤»¤ó¡£¤Ê¤¼¾¡¼ê¤Ë¥Ñ\n"
-"¥Ã¥±¡¼¥¸¤òÁª¤Ö¤«¤È¸À¤¦¤È¡¢¤Û¤«¤Î¥Ñ¥Ã¥±¡¼¥¸¤ò¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¤È¤­\n"
-"¤ËɬÍפȤʤë¥Ñ¥Ã¥±¡¼¥¸¤¬¤¢¤Ã¤Æ¡¢¤½¤ì¤¬¤Ê¤¤¤È¥¤¥ó¥¹¥È¡¼¥ë¤¬´°Î»¤·\n"
-"¤Ê¤¤¤«¤é¤Ç¤¹¡£\n"
-"\n"
-"°ìÍ÷¤Î²¼¤Ë¤¢¤ë¾®¤µ¤Ê¥Õ¥í¥Ã¥Ô¡¼¥Ç¥£¥¹¥¯¤Î¥¢¥¤¥³¥ó¤Ï¡¢°ÊÁ°¤Î¥¤¥ó¥¹\n"
-"¥È¡¼¥ë»þ¤ËÁª¤ó¤À¥Ñ¥Ã¥±¡¼¥¸°ìÍ÷¤òÆɤ߹þ¤à¤¿¤á¤Î¤â¤Î¤Ç¤¹¡£¤³¤Î¥¢¥¤\n"
-"¥³¥ó¤òÁª¤Ö¤È¡¢°ÊÁ°¤Î¥¤¥ó¥¹¥È¡¼¥ë¤ÎºÇ¸å¤Ëºî¤Ã¤¿¥Õ¥í¥Ã¥Ô¡¼¤òÆþ¤ì¤ë\n"
-"¤è¤¦¤Ë»Ù»ý¤¬½Ð¤Þ¤¹¡£¤³¤¦¤¤¤¦¥Õ¥í¥Ã¥Ô¡¼¤Îºî¤êÊý¤Ï¡¢¤µ¤¤¤´¤Î¥¹¥Æ¥Ã¥×\n"
-"¤ÎÆóÈÖÌܤΥҥó¥È¤òÆɤó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"¥Þ¥·¥ó¤ò¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤äLAN¤Ë¤Ä¤Ê¤®¤¿¤¤¤Ê¤é¡¢Àµ¤·¤¤¥ª¥×¥·¥ç¥ó¤òÁª¤ó¤Ç\n"
-"¤¯¤À¤µ¤¤¡£¤¢¤é¤«¤¸¤á¤½¤Î¥Ç¥Ð¥¤¥¹¤Î¥¹¥¤¥Ã¥Á¤òÆþ¤ì¤Æ¡¢DrakX¤¬¤½¤ì¤ò¼«Æ°\n"
-"¸¡½Ð¤Ç¤­¤ë¤è¤¦¤Ë¤·¤Æ¤ª¤­¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"Mandrake Linux ¤Ï¥¤¥ó¥¹¥È¡¼¥ë»þ¤Ë¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤ÎÀßÄê¤â¤Ç¤­¤Þ¤¹¡£\n"
-"²Äǽ¤ÊÀܳ¤Ï¡¢ÉáÄ̤Υâ¥Ç¥à¡¢ISDN¥â¥Ç¥à¡¢ADSLÀܳ¡¢¥±¡¼¥Ö¥ë¥â¥Ç¥à¡¢¤½¤·¤Æ\n"
-"Ä̾ï¤ÎLANÀܳ¡Ê¥¤¡¼¥µ¥Í¥Ã¥È¡Ë¤Ç¤¹¡£\n"
-"\n"
-"¤³¤³¤Ç¤ÏÀßÄê¤ÎºÙ¤«¤¤ÏäϤ·¤Þ¤»¤ó¡£¤¿¤À¡¢¥¤¥ó¥¿¡¼¥Í¥Ã¥È¥µ¡¼¥Ó¥¹¥×¥í¥Ð¥¤¥À\n"
-"¤ä¥·¥¹¥Æ¥à´ÉÍý¼Ô¤Ë¤â¤é¤Ã¤¿¥Ñ¥é¥á¡¼¥¿¤ÏÁ´ÉôÍÑ°Õ¤·¤Æ¤ª¤¤¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"ÀßÄê¤Î¾ÜºÙ¤Ï¡¢¥Þ¥Ë¥å¥¢¥ë¤Î¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤Î¾Ï¤ò¸«¤ë¤«¡¢¤¢¤ë¤¤¤Ïñ¤Ë\n"
-"¥·¥¹¥Æ¥àÀßÄ꤬¤¹¤ó¤Ç¤«¤é¡¢¤½¤³¤ÇÀâÌÀ¤¹¤ë¥×¥í¥°¥é¥à¤ò»È¤Ã¤ÆÀܳ¤òÀßÄꤷ\n"
-"¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"¥Í¥Ã¥È¥ï¡¼¥¯¤ÎÀßÄê¤Ï¥¤¥ó¥¹¥È¡¼¥ë¸å¤Ë¤ä¤ê¤¿¤¤¡¢¤¢¤ë¤¤¤Ï¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄ꤬\n"
-"¤¹¤ó¤Ç¤¤¤ë¤Ê¤é¡Ö¥­¥ã¥ó¥»¥ë¡×¤ò²¡¤·¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"¤Ç¤Ï¥Þ¥·¥ó¤Îµ¯Æ°»þ¤Ë¼«Æ°Åª¤Ë³«»Ï¤·¤¿¤¤¥µ¡¼¥Ó¥¹¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"¤³¤³¤Ë¤Ï¸½ºß¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ç»È¤¨¤ë¥µ¡¼¥Ó¥¹¤¬Á´Éôµó¤¬¤Ã¤Æ¤¤¤Þ¤¹¡£\n"
-"¤è¤¯¸«¤Æ¡¢µ¯Æ°»þ¤Ëɬ¤º¤·¤âɬÍפʤ¤¤â¤Î¤Î¥Á¥§¥Ã¥¯¤ò¤Ï¤º¤·¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"¹àÌܤξå¤Ë¥Þ¥¦¥¹¤ò¤â¤Ã¤Æ¤¯¤ë¤È¡¢¤½¤ì¤¬²¿¤Î¥µ¡¼¥Ó¥¹¤«ÀâÌÀ¤¹¤ë\n"
-"¾®¤µ¤Ê¿á¤­½Ð¤·¤¬½Ð¤Æ¤­¤Þ¤¹¡£¤Ç¤â¡¢¤½¤Î¥µ¡¼¥Ó¥¹¤¬Ìò¤ËΩ¤Ä¤«¤ï¤«¤é\n"
-"¤Ê¤±¤ì¤Ð¡¢¥Ç¥Õ¥©¥ë¥È¤Î¤Þ¤Þ¤Ë¤·¤Æ¤ª¤¯¤Û¤¦¤¬ÌµÆñ¤Ç¤¹¡£\n"
-"\n"
-"¤³¤Î¥Þ¥·¥ó¤ò¥µ¡¼¥Ð¤Ë¤¹¤ë¤Ä¤â¤ê¤Ê¤é¡¢¤³¤³¤Ç¤ÏÆä˵¤¤ò¤Ä¤±¤Þ¤·¤ç¤¦¡£\n"
-"»È¤ï¤Ê¤¤¥µ¡¼¥Ó¥¹¤ò¤à¤ä¤ß¤Ë³«»Ï¤µ¤»¤Æ¤Ï¤¤¤±¤Þ¤»¤ó¡£°ìÉô¤Î¥µ¡¼¥Ó¥¹¤Ï¡¢\n"
-"¥µ¡¼¥Ð¾å¤Ç»È¤¦¤È´í¸±¤À¤È¤¤¤¦¤Î¤ò¤ªËº¤ì¤Ê¤¯¡£\n"
-"°ìÈ̤ˡ¢ËÜÅö¤ËɬÍפʥµ¡¼¥Ó¥¹¤À¤±Áª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"Linux ¤Ï»þ´Ö¤òGMT¡¢¤Ä¤Þ¤ê¡Ö¥°¥ê¥Ë¥Ã¥¸É¸½à»þ¡×¤Ç´ÉÍý¤·¤Æ¤¤¤Æ¡¢¤½¤ì¤ò\n"
-"¤¢¤Ê¤¿¤ÎÁª¤ó¤À»þ´ÖÂӤˤ¢¤ï¤»¤ÆÊÑ´¹¤·¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-"X (X ¥¦¥£¥ó¥É¥¦¥·¥¹¥Æ¥à) ¤Ï¡¢GNU/Linux ¥°¥é¥Õ¥£¥Ã¥¯¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¤Î\n"
-"¥­¥â¤Ç¡¢Mandrake Linux ¤Ë¤Ä¤¤¤Æ¤¤¤ë¥°¥é¥Õ¥£¥Ã¥¯´Ä¶­ (KDE, Gnome, \n"
-"AfterStep, WindowMaker...)¤Ï¤¹¤Ù¤Æ¤³¤ì¤Ë°Í¸¤·¤Þ¤¹¡£¤³¤³¤Ç¤Ï¡¢drakX\n"
-"¤Ï¼«Æ°Åª¤Ë X ¤òÀßÄꤷ¤è¤¦¤È¤·¤Þ¤¹¡£\n"
-"\n"
-"¤³¤ì¤¬¼ºÇÔ¤¹¤ë¤³¤È¤Ï¤Þ¤º¤¢¤ê¤Þ¤»¤ó¡£¼ºÇÔ¤¹¤ë²ÄǽÀ­¤È¤·¤Æ¹Í¤¨¤é¤ì¤ë¤Î\n"
-"¤Ï¡¢¥Ï¡¼¥É¥¦¥§¥¢¤¬¤È¤Æ¤â¸Å¤¤¡Ê¤«¿·¤·¤¹¤®¡Ë¤È¤¤¤¦¤³¤È¤Ç¤¹¡£À®¸ù¤¹¤ì¤Ð\n"
-"¥â¥Ë¥¿¤Ë²Äǽ¤ÊºÇÂç¤Î²òÁüÅ٤Ǽ«Æ°Åª¤ËX¤¬µ¯Æ°¤·¤Þ¤¹¡£¤½¤·¤Æ¥¦¥£¥ó¥É¥¦\n"
-"¤¬½Ð¤Æ¤­¤Æ¡¢¤³¤Î²èÌ̤¬¸«¤¨¤ë¤«¤È³Îǧ¤·¤Þ¤¹¡£\n"
-"\n"
-"¡Ö¥¨¥­¥¹¥Ñ¡¼¥È¡×¥¤¥ó¥¹¥È¡¼¥ë¤Î¾ì¹ç¤Ë¤Ï¡¢X ÀßÄꥦ¥£¥¶¡¼¥É¤ËÆþ¤ê¤Þ¤¹¡£\n"
-"¤³¤Î¥¦¥£¥¶¡¼¥É¤Ë¤Ä¤¤¤Æ¾Ü¤·¤¯¤Ï¡¢¥Þ¥Ë¥å¥¢¥ë¤ò¸«¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¥á¥Ã¥»¡¼¥¸¤¬¸«¤¨¤Æ¡¢¤½¤ì¤Ë¡Ö¤Ï¤¤¡×¤ÈÅú¤¨¤¿¤é¡¢drakX¤Ï¼¡¤Ë¿Ê¤ß¤Þ¤¹¡£\n"
-"¥á¥Ã¥»¡¼¥¸¤¬¸«¤¨¤Ê¤±¤ì¤Ð¡¢ÀßÄ꤬¤Þ¤Á¤¬¤Ã¤Æ¤¤¤ë¤È¤¤¤¦¤³¤È¤Ê¤Î¤Ç¡¢¤½¤Î\n"
-"¥Æ¥¹¥È¤Ï10ÉäǽªÎ»¤·¤Æ¡¢¤â¤È¤Î²èÌ̤ËÌá¤ê¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"°ìȯÌܤÀ¤È¡¢¤¢¤Þ¤ê²èÌ̤ζñ¹ç¤¬¤è¤¯¤Ê¤¤¤«¤â¤·¤ì¤Þ¤»¤ó¡£\n"
-"²èÌ̤¬¾®¤µ¤¹¤®¤ë¤È¤«¡¢º¸±¦¤Ë¤º¤ì¤Æ¤¤¤ë¤È¤«¡Ë¡£¤À¤«¤éX¤¬Àµ¤·¤¯\n"
-"µ¯Æ°¤·¤¿¾ì¹ç¤Ë¤Ç¤â¡¢DrakX ¤ÏÀßÄ꤬ŬÀÚ¤«¤É¤¦¤«¤­¤¤¤Æ¡¢²Äǽ¤Ê³Æ¼ï¤Î\n"
-"¥â¡¼¥É¤òɽ¼¨¤·¤Æ¡¢¹¥¤­¤Ê¤Î¤òÁª¤Ù¤È¸À¤¦¤ï¤±¤Ç¤¹¡£\n"
-"\n"
-"ºÇ¸å¤Î¼êÃʤȤ·¤Æ¡¢ÁêÊѤï¤é¤ºX¤¬Æ°¤«¤Ê¤±¤ì¤Ð¡Ö¥°¥é¥Õ¥£¥Ã¥¯¥¹¥«¡¼¥É¤ÎÊѹ¹¡×\n"
-"¤òÁª¤Ó¡Ö°ìÍ÷¤Ë¤Ê¤¤¥«¡¼¥É¡×¤òÁªÂò¡¢¤É¤Î¥µ¡¼¥Ð¤ò»È¤¦¤«¤­¤«¤ì¤¿¤é FBDev¤ò\n"
-"Áª¤Ó¤Þ¤¹¡£¤³¤ì¤Ï¥Õ¥§¡¼¥ë¥»¡¼¥Õ¤ÊÁªÂò»è¤Ç¡¢ºÇ¶á¤Î¤¹¤Ù¤Æ¤Î¥°¥é¥Õ¥£¥Ã¥¯¥¹\n"
-"¥«¡¼¥É¤Ç»È¤¨¤Þ¤¹¡£¤½¤ì¤«¤é¡ÖºÆ¥Æ¥¹¥È¡×¤òÁª¤ó¤Ç³Îǧ¤·¤Þ¤·¤ç¤¦¡£"
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"ºÇ¸å¤Ë¡¢µ¯Æ°»þ¤Ë¥°¥é¥Õ¥£¥Ã¥¯¥æ¡¼¥¶¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¤¬¤Û¤·¤¤¤«Ê¹¤«¤ì¤Þ¤¹¡£\n"
-"ÀßÄê¤ò»î¤·¤Æ¤¤¤Ê¤¤¤È¤­¤Ç¤â¡¢¤³¤Î¼ÁÌä¤Ï½Ð¤Þ¤¹¡£¥Þ¥·¥ó¤ò¥µ¡¼¥Ð¤È¤·¤Æ»È¤¦¤«\n"
-"¥Ç¥£¥¹¥×¥ì¥¤¤ÎÀßÄ꤬¤¦¤Þ¤¯¤¤¤«¤Ê¤«¤Ã¤¿»þ¤Ë¤Ï¡¢¤³¤³¤Ç¤Ï¤â¤Á¤í¤ó¡Ö¤¤¤¤¤¨¡×\n"
-"¤ÈÅú¤¨¤Þ¤·¤ç¤¦¡£"
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux CDROM ¤Ë¤Ï¥ì¥¹¥­¥å¡¼¥â¡¼¥É¤¬ÁȤ߹þ¤ó¤Ç¤¢¤ê¤Þ¤¹¡£¤³¤ì¤ò\n"
-"»È¤¦¤Ë¤Ï CDROM ¤«¤éµ¯Æ°¤·¤Æ¡¢µ¯Æ°»þ¤Ë >>F1<< ¥­¡¼¤ò²¡¤·¡¢¥×¥í¥ó¥×¥È¤Ç\n"
-">>rescue<< ¤È¥¿¥¤¥×¤¹¤ë¤³¤È¤Ç¤¹¡£¤Ç¤â¡¢CDROM¤«¤éµ¯Æ°¤Ç¤­¤Ê¤¤¾ì¹ç¤Ë¤Ï¡¢\n"
-"2¼ïÎà¤Î¾ì¹ç¤Ë¤³¤³¤ËÌá¤Ã¤Æ¤¯¤ëɬÍפ¬¤¢¤ë¤Ç¤·¤ç¤¦:\n"
-"\n"
-" * ¥Ö¡¼¥È¥í¡¼¥À¤Î¥¤¥ó¥¹¥È¡¼¥ë»þ¤Ë¤Ï¡¢drakX ¤Ï¼ç¥Ç¥£¥¹¥¯¤Î¥Ö¡¼¥È¥»¥¯¥¿\n"
-" (MBR) ¤ò½ñ¤­´¹¤¨¤Þ¤¹¡ÊÊ̤Υ֡¼¥È¥Þ¥Í¡¼¥¸¥ã¤ò»È¤Ã¤Æ¤¤¤Ê¤¤¸Â¤ê¡Ë¡£¤³¤¦\n"
-"¤¹¤ë¤³¤È¤Ç¡¢¥¦¥£¥ó¥É¥¦¥º¤È GNU/Linux ¤Î¤É¤Ã¤Á¤Ç¤âµ¯Æ°¤Ç¤­¤ë¤è¤¦¤Ë¤Ê¤ê\n"
-"¤Þ¤¹¡Ê¥·¥¹¥Æ¥à¤Ë¥¦¥£¥ó¥É¥¦¥º¤¬Æþ¤Ã¤Æ¤¤¤ë¾ì¹ç¡Ë¡£\n"
-"¡¡¥¦¥£¥ó¥É¥¦¥º¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Ê¤ª¤¹¤È¡¢¥Þ¥¤¥¯¥í¥½¥Õ¥È¤Î¥¤¥ó¥¹¥È¡¼¥ë\n"
-"¥×¥í¥»¥¹¤¬¥Ö¡¼¥È¥»¥¯¥¿¤ò½ñ¤­´¹¤¨¤ë¤Î¤Ç¡¢GNU/Linux¤¬µ¯Æ°¤Ç¤­¤Þ¤»¤ó!\n"
-"\n"
-" * ¤â¤·²¿¤«ÌäÂ꤬µ¯¤­¤Æ¡¢¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤«¤é GNU/Linux ¤òµ¯Æ°¤Ç¤­¤Ê¤¤\n"
-"¾ì¹ç¤Ë¤Ï¡¢GNU/Linux ¤òµ¯Æ°¤¹¤ë¤Ë¤Ï¤³¤Î¥Õ¥í¥Ã¥Ô¡¼¤·¤«¼ê¤¬¤¢¤ê¤Þ¤»¤ó¡£\n"
-"¤³¤Î¥Ç¥£¥¹¥¯¤Ë¤Ï¡¢ÄäÅŤȤ«¤Á¤ç¤Ã¤È¤·¤¿¥¿¥¤¥×¥ß¥¹¡¢¥Ñ¥¹¥ï¡¼¥É¤Î´Ö°ã¤¤\n"
-"¤Ê¤É¤Ë¤è¤ë¥¯¥é¥Ã¥·¥å¤«¤é¥·¥¹¥Æ¥à¤ò²óÉü¤µ¤»¤ë¤Î¤Ë»È¤¨¤ë¡¢³Æ¼ï¤Î¥Ä¡¼¥ë\n"
-"¤¬Æþ¤Ã¤Æ¤¤¤Þ¤¹¡£\n"
-"\n"
-"¤³¤Î¥¹¥Æ¥Ã¥×¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤È¡¢¥Õ¥í¥Ã¥Ô¡¼¥Ç¥£¥¹¥¯¤ò¥É¥é¥¤¥Ö¤ËÆþ¤ì¤í¤È\n"
-"Í׵ᤵ¤ì¤Þ¤¹¡£\n"
-"ÁÞÆþ¤¹¤ë¥Õ¥í¥Ã¥Ô¡¼¥Ç¥£¥¹¥¯¤Ï¡¢¶õ¤«¡¢ÉÔÍפʥǡ¼¥¿¤·¤«Æþ¤Ã¤Æ¤¤¤Ê¤¤¤â¤Î\n"
-"¤Ë¤·¤Þ¤·¤ç¤¦¡£¥Õ¥©¡¼¥Þ¥Ã¥È¤¹¤ëɬÍפϤ¢¤ê¤Þ¤»¤ó¡£DrakX¤¬´°Á´¤Ë¤½¤ì¤ò\n"
-"½ñ¤­´¹¤¨¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"¤µ¤Æ¤³¤ó¤É¤Ï¡¢¥Ï¡¼¥É¥Ç¥£¥¹¥¯¾å¤ÇMandrake Linux OS ¤ò¤É¤³¤Ë¥¤¥ó¥¹¥È¡¼¥ë\n"
-"¤¹¤ë¤«Áª¤Ö¤³¤È¤Ë¤Ê¤ê¤Þ¤¹¡£¤â¤·¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤¬¶õ¤«¡¢¤¹¤Ç¤ËÊ̤ΠOS ¤¬\n"
-"¥¹¥Ú¡¼¥¹¤òÁ´Éô»È¤Ã¤Æ¤·¤Þ¤Ã¤Æ¤¤¤¿¤é¡¢¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÀڤäƤä¤ëɬÍפ¬\n"
-"¤¢¤ê¤Þ¤¹¡£°ì¸À¤Ç¡¢¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÀÚ¤ë¤È¤¤¤¦¤Î¤Ï¡¢¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤òÏÀÍý\n"
-"Ū¤Ëʬ³ä¤·¤Æ¤ä¤ë¤³¤È¤Ç¤¹¡£¤½¤¦¤ä¤Ã¤Æ¡¢¿·¤·¤¯ Mandrake Linux ¥·¥¹¥Æ¥à¤ò\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¶èÀÚ¤ê¤ò¤³¤·¤é¤¨¤Æ¤ä¤ë¤ï¤±¤Ç¤¹¡£\n"
-"\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÀÚ¤ë¤Î¤Ï¡¢¤ä¤ê¤Ê¤ª¤·¤ä¸åÌá¤ê¤¬¤­¤­¤Þ¤»¤ó¡£¤À¤«¤é\n"
-"½é¿´¼Ô¤Ë¤Ï¤ª¤Ã¤«¤Ê¤¤¤·¡¢µ¤Èè¤ì¤¹¤ëºî¶È¤Ç¤Ï¤¢¤ê¤Þ¤¹¡£\n"
-"¤³¤Î¥¦¥£¥¶¡¼¥É¤Ï¥×¥í¥»¥¹¤ò´Êñ¤Ë¤¹¤ë¤¿¤á¤Î¤â¤Î¤Ç¤¹¡£»Ï¤á¤ëÁ°¤Ë¡¢\n"
-"¥Þ¥Ë¥å¥¢¥ë¤ò¤¸¤Ã¤¯¤êÆɤó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¥¨¥­¥¹¥Ñ¡¼¥È¥â¡¼¥É¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤ò¤·¤Æ¤¤¤¦¤Ê¤é¡¢Mandrake Linux \n"
-"¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Ä¡¼¥ë DiskDrake ¤¬µ¯Æ°¤·¤Þ¤¹¡£¤³¤ì¤ò»È¤¦¤È¡¢¥Ñ¡¼\n"
-"¥Æ¥£¥·¥ç¥ó¤ÎºÙ¤«¤¤ÀßÄ꤬¤Ç¤­¤Þ¤¹¡£¥Þ¥Ë¥å¥¢¥ë¤Î DiskDrake ¤Î¾Ï¤ò \n"
-"»²¾È¤·¤Æ¤¯¤À¤µ¤¤¡£»È¤¤Êý¤ÏƱ¤¸¤Ç¤¹¡£¥¤¥ó¥¹¥È¡¼¥ë¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹ \n"
-"¤«¤é¤Ï¡¢¤³¤³¤ÇÀâÌÀ¤¹¤ë¥¦¥£¥¶¡¼¥É¤¬»È¤¨¤Þ¤¹¡£¤³¤ì¤Ë¤Ï¡¢¥¤¥ó¥¿¡¼ \n"
-"¥Õ¥§¡¼¥¹¤Ç¡Ö¥¦¥£¥¶¡¼¥É¡×¥Ü¥¿¥ó¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"¤â¤·¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¤¹¤Ç¤ËÀڤäƤ¢¤ë¤Ê¤é¡ÊÁ°¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤³ \n"
-"¤È¤¬¤¢¤ë¤È¤«¡¢Ê̤Υѡ¼¥Æ¥£¥·¥ç¥ó¥Ä¡¼¥ë¤ò»È¤Ã¤¿¤È¤«¡Ë¡¢¤¢¤È¤Ïñ¤Ë \n"
-"Linux ¥·¥¹¥Æ¥à¤ò¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ì¤Ð¤¤¤¤¤À¤±¤Ç¤¹¡£\n"
-"\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¤Þ¤ÀÄêµÁ¤µ¤ì¤Æ¤¤¤Ê¤±¤ì¤Ð¡¢¿·¤·¤¯ºî¤ê¤Þ¤·¤ç¤¦¡£\n"
-"¤½¤ì¤Ë¤Ï¡¢¾å¤ÇÍÑ°Õ¤·¤¿¥¦¥£¥¶¡¼¥É¤ò»È¤Ã¤Æ¤¯¤À¤µ¤¤¡£¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤ÎÀßÄê\n"
-"¤Ë±þ¤¸¤Æ¡¢¤¤¤¯¤Ä¤«¤ä¤êÊý¤¬¤¢¤ê¤Þ¤¹:\n"
-"\n"
-" * ¶õ¤­¥¹¥Ú¡¼¥¹¤ò»È¤¦¡§¤³¤ì¤Ï¶õ¤­¥Ç¥£¥¹¥¯¤ò¼«Æ°Åª¤Ë¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤·¤Æ \n"
-"¤¯¤ì¤Þ¤¹¡£¤³¤ì°Ê¾å²¿¤â¤¹¤ëɬÍפϤ¢¤ê¤Þ¤»¤ó¡£\n"
-"\n"
-"* ´û¸¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò»È¤¦: ¥¦¥£¥¶¡¼¥É¤¬´û¸¤ÎLinux ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò \n"
-"¥Ç¥£¥¹¥¯¾å¤Ç¸«¤Ä¤±¤Þ¤·¤¿¡£¤â¤·¤³¤ì¤ò»È¤¦¤Ê¤é¡¢¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤Ó¤Þ¤¹¡£\n"
-"\n"
-" * ¥¦¥£¥ó¥É¥¦¥º¤Î¶õ¤­Éôʬ¤ò»È¤¦: ¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Ë¥¦¥£¥ó¥É¥¦¥º¤¬\n"
-"  ¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Æ¤¤¤Æ¡¢¥Ç¥£¥¹¥¯Á´ÂΤò»È¤Ã¤Æ¤¤¤ë¤Ê¤é¡¢\n"
-"  Linux ¤Î¥Ç¡¼¥¿ÍѤ˶õ¤­¤ò¤Ä¤¯¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£¤³¤ì¤Ë¤Ï¡¢\n"
-"  ¥¦¥£¥ó¥É¥¦¥º¤ò¾Ã¤·¤Æ¤·¤Þ¤Ã¤Æ¤â¤¤¤¤¤Ç¤¹¤·¡Ê¾å¤Î¡ÖÁ´¥Ç¥£¥¹¥¯¾Ãµî¡×\n"
-"  ¤«¡Ö¥¨¥­¥¹¥Ñ¡¼¥È¥â¡¼¥É¡×¤ò¸«¤Æ¤¯¤À¤µ¤¤¡Ë¡¢¥¦¥£¥ó¥É¥¦¥º¤Î\n"
-"  ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥ê¥µ¥¤¥º¤¹¤ëÊýË¡¤â¤¢¤ê¤Þ¤¹¡£¥ê¥µ¥¤¥º¤Î¾ì¹ç¡¢\n"
-"  ¥Ç¡¼¥¿¤Ï¤¹¤Ù¤Æ»Ä¤ê¤Þ¤¹¡£ Mandrake Linux ¤È¥¦¥£¥ó¥É¥¦¥º¤òƱ¤¸\n"
-"  ¥Þ¥·¥ó¤Ç»È¤¤¤¿¤±¤ì¤Ð¤³¤ì¤¬¤ª¾©¤á¤Ç¤¹¡£\n"
-"\n"
-"  ¤³¤ÎÊýË¡¤òÁª¤ÖÁ°¤Ë¡¢¤³¤ì¤ò¤ä¤ë¤È¥¦¥£¥ó¥É¥¦¥º¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï\n"
-"  Á°¤è¤ê¾®¤µ¤¯¤Ê¤ë¤Î¤Ï¾µÃΤ·¤Æ¤ª¤¤¤Æ¤¯¤À¤µ¤¤¡£\n"
-"  ¤Ä¤Þ¤ê¡¢¥¦¥£¥ó¥É¥¦¥º¤Î¤Û¤¦¤Ç¤Ï¡¢¥Ç¡¼¥¿¤òÊݸ¤·¤¿¤ê¿·¤·¤¤¥½¥Õ¥È¤ò\n"
-"  ¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¤È¤­¤Ë¡¢»È¤¨¤ë¶õ¤­¤¬¾¯¤Ê¤¯¤Ê¤ë¤ï¤±¤Ç¤¹¡£\n"
-"\n"
-" * ¥Ç¥£¥¹¥¯Á´ÂΤò¾Ãµî: ¥Ï¡¼¥É¥É¥é¥¤¥Ö¾å¤ÎÁ´¥Ç¡¼¥¿¤ä¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò\n"
-"  ¾Ãµî¤·¤Æ¡¢¿·¤·¤¯ Mandrake Linux ¤Ç¾å½ñ¤­¤·¤¿¤±¤ì¤Ð¡¢¤³¤Î¥ª¥×¥·¥ç¥ó¤ò\n"
-"  Áª¤Ó¤Þ¤·¤ç¤¦¡£¤³¤Î¾ì¹ç¡¢¿µ½Å¤Ë¤·¤Æ¤¯¤À¤µ¤¤¡£¤¤¤Ã¤¿¤ó³Îǧ¥Ü¥¿¥ó¤ò\n"
-"  ²¡¤·¤¿¤é¡¢¤â¤¦¤ä¤ê¤Ê¤ª¤·¤Ï¤­¤­¤Þ¤»¤ó¡£\n"
-"\n"
-" !! ¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤Ö¤È¡¢¥Ç¥£¥¹¥¯¾å¤Î¥Ç¡¼¥¿¤Ï¤¹¤Ù¤Æ¾Ã¤¨¤Þ¤¹¤è !!\n"
-"\n"
-" * ¥¦¥£¥ó¥É¥¦¥º¤òºï½ü: ¥É¥é¥¤¥Ö¾å¤Î¤â¤Î¤¹¤Ù¤Æ¤ò¾Ãµî¤·¤Æ¡¢Çò»æ¤Î¾õÂÖ \n"
-"¤«¤é¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¤ä¤êľ¤·¤Þ¤¹¡£¥Ç¥£¥¹¥¯¾å¤Î¥Ç¡¼¥¿¤ÏÁ´Éô¾Ã¤¨¤Þ¤¹¡£\n"
-"\n"
-"   !! ¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤Ö¤È¡¢¥Ç¥£¥¹¥¯¾å¤Î¥Ç¡¼¥¿¤ÏÁ´Éô¾Ã¤¨¤Þ¤¹¤è !!\n"
-"\n"
-" * ¥¨¥­¥¹¥Ñ¡¼¥È¥â¡¼¥É: ¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤ò¼êÆ°¤Ç¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤·¤¿¤±¤ì¤Ð¡¢\n"
-"  ¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£¤Ç¤â¡¢Ãí°Õ¤·¤Æ¤¯¤À¤µ¤¤¡£¶¯ÎϤʤÀ¤±¤Ë¡¢\n"
-"  ´í¸±¤ÊÁªÂò¤Ç¤â¤¢¤ê¤Þ¤¹¡£¥Ç¥£¥¹¥¯¾å¤ÎÁ´¥Ç¡¼¥¿¤ò¤¢¤Ã¤µ¤ê¾Ã¤·¤Æ¤·¤Þ¤¨¤Þ¤¹¡£\n"
-"  ¤è¤¯¤è¤¯¤ï¤«¤Ã¤¿¤¦¤¨¤Ç¤Ê¤±¤ì¤Ð¡¢¤³¤ì¤ÏÁª¤Ð¤Ê¤¤¤Ç¤¯¤À¤µ¤¤¡£"
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"¤Ï¡¼¤¤¡¢¤Ç¤­¤Þ¤·¤¿¡£¥¤¥ó¥¹¥È¡¼¥ë¤¬´°Î»¤·¤Æ¡¢GNU/Linux¥·¥¹¥Æ¥à¤¬»È¤¨¤ë\n"
-"¤è¤¦¤Ë¤Ê¤ê¤Þ¤·¤¿¤è¡£OK ¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤È¥·¥¹¥Æ¥à¤¬ºÆµ¯Æ°¤·¤Þ¤¹¡£¤â¤·\n"
-"¥Ç¥å¥¢¥ë¥Ö¡¼¥È¤Ë¤·¤Æ¤¤¤¿¤é¡¢¥¦¥£¥ó¥É¥¦¥º¤Ç¤âLinux¤Ç¤âÁª¤Ù¤Þ¤¹¡£\n"
-"\n"
-"¡Ö¹âÅ١ץܥ¿¥ó¤ò²¡¤¹¤È¡¢¤µ¤é¤ËÆó¤Ä¥Ü¥¿¥ó¤¬½Ð¤Æ¤­¤Þ¤¹:\n"
-"\n"
-" * ¼«Æ°¥¤¥ó¥¹¥È¡¼¥ë¥Õ¥í¥Ã¥Ô¡¼¤òºî¤ë: ²¿¤â¼ê½Ð¤·¤·¤Ê¤¯¤Æ¤â¼«Æ°Åª¤Ë¡¢\n"
-"¤¤¤Þ¤ä¤Ã¤¿¤Î¤È¤Û¤È¤ó¤ÉƱ¤¸¥¤¥ó¥¹¥È¡¼¥ë¤ò¤·¤Æ¤¯¤ì¤ë¥Õ¥í¥Ã¥Ô¡¼¤òºîÀ®¡£\n"
-"\n"
-"   ¤³¤Î¥Ü¥¿¥ó¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤È¡¢Æó¤Ä¤Î¥ª¥×¥·¥ç¥ó¤¬Áª¤Ù¤ë¤Þ¤¹:\n"
-"\n"
-"    * ºÆ¸½: ¤³¤ì¤Ï¼ç¤Ë¼«Æ°¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤¹¡£¥Ñ¡¼¥Æ¥£¥·¥ç¥óÀÚ¤ê¤À¤±¤Ï\n"
-"ÂÐÏ÷¿¤Ç¹Ô¤ï¤ì¤Þ¤¹¡£\n"
-"\n"
-"    * ¼«Æ°²½: ´°Á´¤Ë¼«Æ°²½¤µ¤ì¤¿¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤¹¡£¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Ï\n"
-"´°Á´¤Ë¾å½ñ¤­¤µ¤ì¤Æ¥Ç¡¼¥¿¤ÏÁ´Éô¾Ã¤¨¤Þ¤¹¡£\n"
-"\n"
-"   »÷¤¿¤è¤¦¤Ê¥Þ¥·¥ó¿¿ô¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¤È¤­¤Ë¤Ï¤È¤Æ¤âÊØÍø¤Ç¤¹¡£\n"
-"ÊÀ¼Ò¤Î¥¦¥§¥Ö¥µ¥¤¥È¤Ç¡¢Auto install ¤Î¹à¤ò¸«¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-" * ¥Ñ¥Ã¥±¡¼¥¸ÁªÂò¤òÊݸ(*): ¤¤¤ÞÁª¤ó¤À¥Ñ¥Ã¥±¡¼¥¸¤Î¥ê¥¹¥È¤òÊݸ¡£\n"
-"¤³¤¦¤·¤Æ¤ª¤¯¤È¡¢Ê̤Υ¤¥ó¥¹¥È¡¼¥ë»þ¤Ë¤â¥É¥é¥¤¥Ö¤Ë¤³¤Î¥Õ¥í¥Ã¥Ô¡¼¤ò\n"
-"Æþ¤ì¤Æ¡¢¥Ø¥ë¥×²èÌÌ F1 ¤Ç >>linux defcfg=\"floppy\"<<¡¡¤Ç¤¹¤ß¤Þ¤¹¡£\n"
-"\n"
-"(*) FAT ·Á¼°¤Î¥Õ¥í¥Ã¥Ô¡¼¤¬É¬ÍסÊGNU/Linux ¤Çºî¤ë¤Ë¤Ï\"mformat a:\"\n"
-"¤È¥¿¥¤¥×¤·¤Þ¤¹¡£)"
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"¿·¤·¤¯¤Ä¤¯¤Ã¤¿¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¡¢¤¹¤Ù¤Æ¥Õ¥©¡¼¥Þ¥Ã¥È¤·¤Ê¤¤¤È»È¤¨¤Þ¤»¤ó\n"
-"¡Ê¥Õ¥©¡¼¥Þ¥Ã¥È¤È¤Ï¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤ò¤Ä¤¯¤ë¤È¤¤¤¦¤³¤È¤Ç¤¹¡Ë¡£\n"
-"\n"
-"¤³¤³¤Ç¡¢´û¸¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤â¥Õ¥©¡¼¥Þ¥Ã¥È¤·¤Æ¡¢Ãæ¿È¤Î¥Ç¡¼¥¿¤ò¾Ãµî\n"
-"¤·¤Æ¤ª¤¯¤³¤È¤â¤Ç¤­¤Þ¤¹¡£¤³¤Î¾ì¹ç¤Ë¤Ï¡¢¥Õ¥©¡¼¥Þ¥Ã¥È¤·¤¿¤¤¥Ñ¡¼¥Æ¥£¥·¥ç¥ó\n"
-"¤âÁª¤ó¤Ç¤ª¤¤¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"Ê̤˴û¸¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò̵Íý¤Ë¥Õ¥©¡¼¥Þ¥Ã¥È¤¹¤ëɬÍפϤ¢¤ê¤Þ¤»¤ó¡£\n"
-"OS ¤ÎÆþ¤Ã¤¿¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¡Ê¤¿¤È¤¨¤Ð¡Ö/¡×¡Ö/usr¡×¡Ö/var¡×¤Ê¤É¡Ë¤Ï\n"
-"¥Õ¥©¡¼¥Þ¥Ã¥È¤¬É¬ÍפǤ¹¤¬¡¢¤È¤Ã¤Æ¤ª¤­¤¿¤¤¥Ç¡¼¥¿¤ÎÆþ¤Ã¤¿\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¡ÊÄ̾ï¤Ï¡Ö/home¡×¡Ë¤Ï¤½¤Î¤Þ¤Þ¤Ç¤À¤¤¤¸¤ç¤¦¤Ö¤Ç¤¹¡£\n"
-"\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥óÁª¤Ó¤Ë¤ÏÃí°Õ¤·¤Þ¤·¤ç¤¦¡£¥Õ¥©¡¼¥Þ¥Ã¥È¤·¤¿¤é¡¢¥Ç¡¼¥¿¤Ï\n"
-"Á´Éô¾Ãµî¤µ¤ì¤Æ¡¢ÆóÅ٤ȲóÉü¤Ç¤­¤Þ¤»¤ó¡£\n"
-"\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Î¥Õ¥©¡¼¥Þ¥Ã¥È¤ò³«»Ï¤¹¤ë¤Ë¤Ï¡ÖOK¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤¹¡£\n"
-"\n"
-"¾¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁª¤ó¤Ç¤½¤Á¤é¤ËMandrake Linux OS ¤òÆþ¤ì¤ë¤Ê¤é¡¢\n"
-"¡Ö¥­¥ã¥ó¥»¥ë¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"ÉÔÎÉ¥Ö¥í¥Ã¥¯¤Î¥Á¥§¥Ã¥¯¤ò¤·¤¿¤±¤ì¤Ð¡Ö¹âÅÙ¤ÊÁªÂò¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"¿·¤·¤¤ Mandrake Linux os ¤ò¥¤¥ó¥¹¥È¡¼¥ëÃæ¤Ç¤¹¡£¤·¤Ð¤é¤¯»þ´Ö¤¬\n"
-"¤«¤«¤ê¤Þ¤¹¡Ê¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¥µ¥¤¥º¤È¥³¥ó¥Ô¥å¡¼¥¿¤Î®Å٤ˤâ¤è¤ê¤Þ¤¹¡Ë¡£\n"
-"\n"
-"¤·¤Ð¤é¤¯¤ªÂÔ¤Á¤ò¡£"
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"Àè¤Ë¿Ê¤àÁ°¤Ë¥é¥¤¥»¥ó¥¹¾ò·ï¤ò¿µ½Å¤ËÆɤó¤Ç¤¯¤À¤µ¤¤¡£¤³¤ì¤Ï Mandrake Linux\n"
-"Á´ÂΤò¥«¥Ð¡¼¤¹¤ë¤â¤Î¤Ç¤¹¡£°ì¤Ä¤Ç¤âƱ°Õ¤Ç¤­¤Ê¤¤¾ò¹à¤¬¤¢¤ì¤Ð¡¢¡ÖµñÈÝ¡×\n"
-"¤ò²¡¤·¤Æ¤¯¤À¤µ¤¤¡£¤¹¤ë¤È¥¤¥ó¥¹¥È¡¼¥ë¤¬¤¹¤°¤Ë½ª¤ï¤ê¤Þ¤¹¡£¥¤¥ó¥¹¥È¡¼¥ë¤ò\n"
-"³¤±¤ë¤Ë¤Ï¡¢¡ÖƱ°Õ¤¹¤ë¡×¥Ü¥¿¥ó¤ò²¡¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"¤µ¤Æ¡¢¤³¤ó¤É¤Ï¤³¤Î¥Þ¥·¥ó¤Ëµá¤á¤ë¥»¥­¥å¥ê¥Æ¥£¿å½à¤òÁª¤ÖÃʳ¬¤Ç¤¹¡£¸¶Â§¤È¤·¤Æ\n"
-"¥Þ¥·¥ó¤¬³°Éô¤Ë¤µ¤é¤µ¤ì¤Æ¤¤¤ëÅٹ礤¤¬¹â¤¤¤Û¤É¡¢¤½¤·¤Æ¥Þ¥·¥óÆâ¤Î¥Ç¡¼¥¿¤Î½ÅÍ×\n"
-"À­¤¬¹â¤¤¤Û¤É¡¢¥»¥­¥å¥ê¥Æ¥£¿å½à¤â¹â¤¯¤·¤Þ¤¹¡£\n"
-"¤Ç¤â¡¢¹â¤¤¥»¥­¥å¥ê¥Æ¥£¤Ï¡¢°ìÈ̤˥ޥ·¥ó¤Î»È¤¤¤ä¤¹¤µ¤òµ¾À·¤Ë¤·¤Þ¤¹¡£\n"
-"³Æ¿å½à¤Ë¤Ä¤¤¤Æ¾Ü¤·¤¯¤Ï¡¢¥ì¥Õ¥¡¥ì¥ó¥¹¥Þ¥Ë¥å¥¢¥ë¤Î MSEC ¤Î¾Ï¤ò»²¾È¤Î¤³¤È¡£\n"
-"\n"
-"²¿¤òÁª¤Ù¤Ð¤¤¤¤¤«¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢¥Ç¥Õ¥©¥ë¥È¤Î¤Þ¤Þ¤Ë¤·¤Æ¤ª¤­¤Þ¤·¤ç¤¦¡£"
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"¤µ¤Æ¤³¤³¤Ç¡¢¿·¤·¤¤ Mandrake Linux ¥·¥¹¥Æ¥à¤Î\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¤Ë¤É¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò»È¤¦¤«»ØÄꤷ¤Þ¤¹¡£¤â¤·\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬ÄêµÁºÑ¤ß¤Ê¤é¡ÊÁ°¤Ë GNU/Linux ¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿\n"
-"¤³¤È¤¬¤¢¤Ã¤¿¤êÊ̤Υġ¼¥ë¤ò»È¤Ã¤¿¤ê¤·¤¿¾ì¹ç¡Ë¡¢¤½¤ì¤ò¤½¤Î¤Þ¤Þ»È¤¦\n"
-"¤³¤È¤â¤Ç¤­¤Þ¤¹¡£¤½¤ì°Ê³°¤Ï¡¢¥Ñ¡¼¥Æ¥£¥·¥ç¥óÄêµÁ¤¬É¬ÍפǤ¹¡£\n"
-"\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¤Ä¤¯¤ë¤Ë¤Ï¡¢¤Þ¤º¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤òÁª¤Ó¤Þ¤¹¡£¤â¤·\n"
-"ºÇ½é¤Î IDE ¥É¥é¥¤¥Ö¤òÁª¤Ö¤Ê¤é¡Öhda¡×¡¢ÆóÈÖÌܤΠIDE ¤Ê¤é¡Öhdb¡×¡¢\n"
-"ºÇ½é¤Î SCSI ¥Ç¥£¥¹¥¯¤Ê¤é¡Ösda¡×¤È¤¤¤¦¶ñ¹ç¤Ë¥¯¥ê¥Ã¥¯¤·¤ÆÁª¤Ó¤Þ¤¹¡£\n"
-"\n"
-"¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÀÚ¤ë¤Ë¤Ï¡¢°Ê²¼¤Î¥ª¥×¥·¥ç¥ó¤¬»È¤¨¤Þ¤¹:\n"
-"\n"
-"   * Á´¾Ãµî: Áª¤ó¤À¥Ï¡¼¥É¥Ç¥£¥¹¥¯¾å¤ÎÁ´¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¾Ãµî¤·¤Þ¤¹¡£\n"
-"\n"
-"   * ¼«Æ°³ä¤êÅö¤Æ: ¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Î¶õ¤­Éôʬ¤Ë¡¢¼«Æ°Åª¤Ë Ext2 ¤È\n"
-"     ¥¹¥ï¥Ã¥×¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¤Ä¤¯¤ê¤Þ¤¹¡£\n"
-"\n"
-"   * ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë½¤Éü: ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤¬Ç˲õ¤µ¤ì\n"
-"     ¤¿¤é¡¢¤³¤Î¥ª¥×¥·¥ç¥ó¤Ç¤½¤ì¤ò½¤Éü¤·¤Æ¤ß¤ë¤³¤È¤¬¤Ç¤­¤Þ¤¹¡£\n"
-"     ¿µ½Å¤Ë»È¤Ã¤Æ¡¢¤³¤ì¤¬Ëüǽ¤Ç¤Ê¤¤¤³¤È¤Ï¾µÃΤ·¤Æ¤ª¤¤¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"   * ¼è¤ê¾Ã¤·: Êѹ¹¤ò¼è¤ê¾Ã¤·¤Þ¤¹¡£\n"
-"\n"
-"   * ¥ê¥í¡¼¥É: Êѹ¹¤òÁ´Éô¼è¤ê¾Ã¤·¤Æ¡¢¤â¤È¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤òÆɤ߹þ¤ß¤Þ"
-"¤¹¡£\n"
-"\n"
-"   * ¥¦¥£¥¶¡¼¥É: ¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥¦¥£¥¶¡¼¥É¤ò»È¤¦¤È¤­¤Î\n"
-"     ¥ª¥×¥·¥ç¥ó¤Ç¤¹¡£¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë¤Ä¤¤¤Æ¤ÎÃ챤¬¤Ê¤¤¿Í¤Ï¡¢¤³¤ì¤¬\n"
-"     ¤ª¾©¤á¤Ç¤¹¡£\n"
-"\n"
-"   * ¥Õ¥í¥Ã¥Ô¡¼¤«¤é²óÉü: °ÊÁ°¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ç¡¢¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤ò\n"
-"     ¥Õ¥í¥Ã¥Ô¡¼¤ËÊݸ¤³¤ì¤Ç¤½¤ì¤ò²óÉü¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"   * ¥Õ¥í¥Ã¥Ô¡¼¤ËÊݸ: ²óÉüÍѤ˥ѡ¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤ò¥Õ¥í¥Ã¥Ô¡¼¤Ë\n"
-"     Êݸ¤·¤¿¤¤¤È¤­¤Ë»È¤¤¤Þ¤¹¡£¤³¤ì¤ò»È¤¦¤è¤¦¶¯¤¯¤ª¾©¤á¤·¤Þ¤¹¡£\n"
-"\n"
-"   * ´°Î»: ¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥óÀڤ꤬½ª¤ï¤Ã¤¿¤é¡¢¤³¤Î¥ª¥×¥·¥ç¥ó¤ò\n"
-"     »È¤Ã¤ÆÊѹ¹¤òÊݸ¤·¤Þ¤¹¡£\n"
-"\n"
-"»²¹Í¤Þ¤Ç¤Ë¡¢¥­¡¼¥Ü¡¼¥É¤«¤é³Æ¥ª¥×¥·¥ç¥ó¤¬Áª¤Ù¤Þ¤¹¡£¥¿¥Ö¤È¾å²¼Ìð°õ¤ò»È¤Ã¤Æ\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁª¤ó¤À¤é¡¢°Ê²¼¤¬»È¤¨¤Þ¤¹:\n"
-"\n"
-"     * Ctrl-c¡§¿·µ¬¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¤Ä¤¯¤ë¡Ê¶õ¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁª¤ó¤À¤È¤­)\n"
-"\n"
-"     * Ctrl-d¡§¥Ñ¡¼¥Æ¥£¥·¥ç¥óºï½ü\n"
-"\n"
-"     * Ctrl-m¡§¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È¤ò¥»¥Ã¥È\n"
-"\n"
-"PPC ¥Þ¥·¥ó¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤·¤Æ¤¤¤ë¾ì¹ç¤Ë¤Ï¡¢yaboot ¥Ö¡¼¥È¥í¡¼¥ÀÍѤˡ¢ºÇÄã 1 MB "
-"¤Î¾®¤µ¤Ê HFS¡Ö¥Ö¡¼¥È¥¹¥È¥é¥Ã¥×¡×¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òºî¤ê¤Þ¤·¤ç¤¦¡£\n"
-"¤³¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¡¢¤¿¤È¤¨¤Ð 50 MB ¤È¤«Â礭¤á¤Ë¤·¤Æ¤ª¤¯¤È¡¢¤½¤³¤ËͽÈ÷¤Î¥«¡¼"
-"¥Í¥ë¤äramdisk ¥¤¥á¡¼¥¸¤òÊݸ¤·¤Æ¤ª¤±¤Æ¡¢¶ÛµÞµ¯Æ°¤Ë»È¤¨¤ÆÊØÍø¤Ç¤¹¡£"
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"¥¦¥£¥ó¥É¥¦¥º¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¤¤¤¯¤Ä¤«¥Ï¡¼¥É¥Ç¥£¥¹¥¯¾å¤Ë¸«¤Ä¤«¤ê¤Þ¤·¤¿¡£\n"
-"Mandrake Linux OS ¤Î¥¤¥ó¥¹¥È¡¼¥ëÍѤ˥ꥵ¥¤¥º¤·¤¿¤¤¤â¤Î¤òÁª¤ó¤Ç\n"
-"¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"³Æ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï°Ê²¼¤Î½ñ¼°¤Ç¤¹: ¡ÖLinux̾¡×¡Ö¥¦¥£¥ó¥É¥¦¥ºÌ¾¡×¡ÖÍÆÎÌ¡×\n"
-"\n"
-"¡ÖLinux ̾¡×¤Ï¼¡¤Î½ñ¼°¤Ç¤¹: ¡Ö¥Ï¡¼¥É¥Ç¥£¥¹¥¯¼ïÎà¡×¡Ö¥É¥é¥¤¥ÖÈÖ¹æ¡×\n"
-"¡Ö¥Ñ¡¼¥Æ¥£¥·¥ç¥óÈÖ¹æ¡×¡Ê¤¿¤È¤¨¤Ð¡Öhda1¡×)\n"
-"\n"
-"\n"
-"¡Ö¥Ï¡¼¥É¥Ç¥£¥¹¥¯¼ïÎà¡×¤Ï¡¢IDE ¥Ç¥£¥¹¥¯¤Ê¤é¡Öhd¡×¤Ç¡¢SCSI ¤Ê¤é¡Ösd¡×\n"
-"¤Ç¤¹¡£\n"
-"\n"
-"\n"
-"¡Ö¥É¥é¥¤¥ÖÈÖ¹æ¡×¤Ï¡¢¡Öhd¡×¤ä¡Ösd¡×¤Î¸å¤Ë¤Ä¤¯Ê¸»ú¤Ç¤¹¡£IDE¤Ê¤é:\n"
-"\n"
-"   * ¡Öa¡×¤Ï¥×¥é¥¤¥Þ¥ê¥³¥ó¥È¥í¡¼¥é¾å¤Î¥Þ¥¹¥¿¥Ç¥£¥¹¥¯\n"
-"\n"
-"   * ¡Öb¡×¤Ï¥×¥é¥¤¥Þ¥ê¥³¥ó¥È¥í¡¼¥é¾å¤Î¥¹¥ì¡¼¥Ö¥Ç¥£¥¹¥¯\n"
-"\n"
-"   * ¡Öc¡×¤Ï¥»¥«¥ó¥À¥êIDE¥³¥ó¥È¥í¡¼¥é¾å¤Î¥Þ¥¹¥¿¥Ç¥£¥¹¥¯\n"
-"\n"
-"   * ¡Öd¡×¤Ï¥»¥«¥ó¥À¥êIDE¥³¥ó¥È¥í¡¼¥é¾å¤Î¥¹¥ì¡¼¥Ö¥Ç¥£¥¹¥¯\n"
-"\n"
-"\n"
-"SCSI ¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Î¾ì¹ç¡¢¡Öa¡×¤¬SCSI IDÈÖ¹æºÇ¾®¤Î¥Ç¥£¥¹¥¯¡¢\n"
-"¡Öb¡×¤Ï¤½¤Î¼¡¤ÎIDÈֹ桢¤È¤¤¤¦¶ñ¹ç¤Ç¤¹\n"
-"¡Ö¥¦¥£¥ó¥É¥¦¥ºÌ¾¡×¤Ï¡¢¥¦¥£¥ó¥É¥¦¥º¤Ç¤Î¥É¥é¥¤¥Öʸ»ú¤Ç¤¹¡ÊºÇ½é¤Î¥Ç¥£¥¹¥¯\n"
-"¤ä¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¡ÖC:¡×¥É¥é¥¤¥Ö¤Ç¤¹)¡£"
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "¤·¤Ð¤é¤¯¤ªÂÔ¤Á¤ò¡£¤³¤ÎÁàºî¤Ï¤·¤Ð¤é¤¯¤«¤«¤ê¤Þ¤¹¤Î¤Ç¡£"
-
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"DrakX¤Ï¤³¤ó¤É¤Ï¡¢¤É¤ó¤Ê¼ïÎà¤Î¥¤¥ó¥¹¥È¡¼¥ë¤ò¤·¤¿¤¤¤«¿Ò¤Í¤Þ¤¹¡£¥Ç¥Õ¥©¥ë¥È\n"
-"¡Ê¿ä¾©¡Ë¥¤¥ó¥¹¥È¡¼¥ë¤«¡¢¤â¤Ã¤È¥³¥ó¥È¥í¡¼¥ë¤·¤¿¤¤¤«¡Ê¡Ö¥¨¥­¥¹¥Ñ¡¼¥È¡×¡Ë\n"
-"¤Ç¤¹¡£¤Þ¤¿¿·µ¬¥¤¥ó¥¹¥È¡¼¥ë¤«´û¸¤ÎMandrake Linux¤ò¹¹¿·¤¹¤ë¤Î¤«¤âÁª¤Ù¤Þ¤¹¡£\n"
-"¡Ö¥¤¥ó¥¹¥È¡¼¥ë¡×¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤È¸Å¤¤¥·¥¹¥Æ¥à¤Ï¤¹¤Ù¤Æ¾Ã¤¨¤Þ¤¹¡£¹¹¿·¤ä¡¢\n"
-"´û¸¥·¥¹¥Æ¥à¤Î½¤Éü¤Ê¤é¡Ö¥¢¥Ã¥×¥°¥ì¡¼¥É¡Ê¹¹¿·¡Ë¡×¤òÁª¤Ó¤Þ¤¹¡£\n"
-"\n"
-"Mandrake Linux¤ÎµìÈǤ¬¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Æ¤¤¤Ê¤¤¤«¡¢Ê£¿ô¤Î OS¤òʹÔ\n"
-"¤·¤Æ»È¤¦¾ì¹ç¤Ë¤Ï¡¢¡Ö¥¤¥ó¥¹¥È¡¼¥ë¡×¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"¸Å¤¤Mandrake Linux¤ò¹¹¿·¤·¤¿¤¤¤Î¤Ê¤é¡Ö¹¹¿·¡×¤òÁª¤Ó¤Þ¤¹¡£\n"
-"\n"
-"GNU/Linux ¤Ø¤Î½¬½ÏÅ٤˱þ¤¸¤Æ¡¢°Ê²¼¤Î¥¤¥ó¥¹¥È¡¼¥ë¡¦¹¹¿·¥ì¥Ù¥ë¤¬\n"
-"Áª¤Ù¤Þ¤¹:\n"
-"\n"
-"* ¿ä¾©: GNU/Linux  ¤Î¥¤¥ó¥¹¥È¡¼¥ë¤¬½é¤á¤Æ¤Ê¤é¤³¤ì¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"¤¦¤ë¤µ¤¤¼ÁÌä¤â¤¢¤Þ¤ê¤Ê¤¯¡¢¤È¤Æ¤â´Êñ¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"* ¥«¥¹¥¿¥Þ¥¤¥º: GNU/Linux ¤Î¤³¤È¤ò¤è¤¯ÃΤäƤ¤¤ë¿Í¤Ï¡¢¥·¥¹¥Æ¥à¤Î\n"
-"¼ç¤Ê»È¤¤Êý¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡Ê¥ï¡¼¥¯¥¹¥Æ¡¼¥·¥ç¥ó¡¢¥µ¡¼¥Ð¡¢³«È¯¡Ë¡£\n"
-"¡Ö¿ä¾©¡×¤è¤ê¤Ï¤¿¤¯¤µ¤ó¼ÁÌä¤ËÅú¤¨¤ë¤³¤È¤Ë¤Ê¤ë¤Î¤Ç¡¢¤³¤Î¥¯¥é¥¹¤ò\n"
-"Áª¤Ö¤Ë¤Ï GNU/Linux ¤Î»ÅÁȤߤˤĤ¤¤ÆÃ챤¬¤¤¤ê¤Þ¤¹¡£\n"
-"\n"
-"* ¥¨¥­¥¹¥Ñ¡¼¥È: GNU/Linux ¤Ë¾Ü¤·¤¤¿Í¤Ï¡¢¤³¤Î¥¤¥ó¥¹¥È¡¼¥ë¥¯¥é¥¹¤ò\n"
-"Áª¤Ù¤Þ¤¹¡£¡Ö¥«¥¹¥¿¥Þ¥¤¥º¡×¤ÈƱ¤¸¤¯¡¢¼ç¤ÊÍÑÅӡʥ¥¯¥¹¥Æ¡¼¥·¥ç¥ó¡¢\n"
-"¥µ¡¼¥Ð¡¢³«È¯¡Ë¤òÁª¤Ù¤Þ¤¹¡£¤³¤Î¥¤¥ó¥¹¥È¡¼¥ë¥¯¥é¥¹¤òÁª¤ÖÁ°¤Ë\n"
-"¤è¤¯¹Í¤¨¤Æ¤¯¤À¤µ¤¤¡£¤­¤ï¤á¤Æ¥«¥¹¥¿¥à²½¤·¤¿¥¤¥ó¥¹¥È¡¼¥ë¤¬¤Ç¤­¤Þ¤¹¡£\n"
-"GNU/Linux¤Ë¤Ä¤¤¤Æ¤è¤Û¤É¾Ü¤·¤¯¤Ê¤¤¤È¡¢¤Ê¤«¤Ê¤«Åú¤¨¤é¤ì¤Ê¤¤¼ÁÌ䤬\n"
-"¤¢¤ê¤Þ¤¹¡£¤ï¤«¤Ã¤¿¿Í°Ê³°¤Ï¡¢¤³¤Î¥¯¥é¥¹¤ÏÁª¤Ð¤Ê¤¤¤³¤È¡£"
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"¤Õ¤Ä¤¦¡¢drakX¤Ï¤¢¤Ê¤¿ÍѤÎÀµ¤·¤¤¥­¡¼¥Ü¡¼¥É¤ò¼«Æ°Åª¤ËÁª¤Ó¤Þ¤¹¡Ê¸À¸ì¤ÎÁªÂò\n"
-"¤ò¤â¤È¤ËȽÃǤ·¤Þ¤¹¡Ë¡£¤À¤«¤é¤³¤Î¥¹¥Æ¥Ã¥×¤Ï¤Õ¤Ä¤¦¤Ï½Ð¤Æ¤­¤Þ¤»¤ó¡£¤¬¡¢¼«Ê¬\n"
-"¤Î¸À¸ì¤Ë¤­¤Ã¤Á¤êÂбþ¤·¤¿¥­¡¼¥Ü¡¼¥É¤ò»È¤Ã¤Æ¤¤¤Ê¤¤¤«¤â¤·¤ì¤Þ¤»¤ó¡£¤¿¤È¤¨¤Ð\n"
-"±Ñ¸ì¤òÏä¹¥¹¥¤¥¹¿Í¤Ê¤é¡¢¥­¡¼¥Ü¡¼¥É¤Ï¥¹¥¤¥¹¼°¤Î¤Û¤¦¤¬¤¤¤¤¤È»×¤¦¤«¤â¤·¤ì¤Þ\n"
-"¤»¤ó¡£¤¢¤ë¤¤¤Ï±Ñ¸ì¤Ä¤«¤¤¤Ç¤â¥±¥Ù¥Ã¥¯ºß½»¤Ê¤é¡¢»÷¤¿¾õ¶·¤Ë¤Ê¤ë¤Ç¤·¤ç¤¦¡£\n"
-"¤¤¤º¤ì¤Î¾ì¹ç¤Ç¤â¡¢¤³¤Î¥¤¥ó¥¹¥È¡¼¥ëÃʳ¬¤ËÌá¤Ã¤Æ¡¢°ìÍ÷¤«¤éŬÀڤʥ­¡¼¥Ü¡¼¥É\n"
-"¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¡Ö¤â¤Ã¤È¡×¥Ü¥¿¥ó¤ò²¡¤¹¤È¡¢¥µ¥Ý¡¼¥È¤µ¤ì¤ë¥­¡¼¥Ü¡¼¥É¤¬¤¹¤Ù¤Æɽ¼¨¤µ¤ì¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-"¥¤¥ó¥¹¥È¡¼¥ë¤È¥·¥¹¥Æ¥àÍøÍѤǻȤ¦¸À¸ì¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¡Ö¹âÅÙ¤ÊÁªÂò¡×¥Ü¥¿¥ó¤Ç¡¢¤Û¤«¤Î¸À¸ì¤âÁª¤Ù¤Þ¤¹¡£¤³¤ì¤Ï¥Þ¥·¥ó¤ËÆþ¤Ã¤Æ¡¢¸å¤Ç\n"
-"ɬÍפ˱þ¤¸¤Æ»È¤¨¤Þ¤¹¡£¤¿¤È¤¨¤Ð¤³¤Î¥Þ¥·¥ó¤ò¥¹¥Ú¥¤¥ó¤Î¿Í¤Ë¤â»È¤Ã¤Æ¤â¤é¤¦¤Ê\n"
-"¤é¡¢¥Ä¥ê¡¼É½¼¨¤Î¼çÍ׸À¸ì¤Ë¤Ï±Ñ¸ì¤òÁª¤ó¤Ç¡¢¡Ö¹âÅÙ¤ÊÁªÂò¡×¤Ç¥¹¥Ú¥¤¥ó¸ì/¥¹\n"
-"¥Ú¥¤¥ó¤ËÂбþ¤¹¤ë¥Ü¥Ã¥¯¥¹¤Ë¥Á¥§¥Ã¥¯¤òÆþ¤ì¤Þ¤¹¡£\n"
-"\n"
-"¸À¸ì¤ÏÊ£¿ôÁª¤Ù¤Þ¤¹¡£ÄɲäθÀ¸ì¡Ê¥í¥±¡¼¥ë¡Ë¤òÁª¤ó¤Ç¡¢OK¤ò²¡¤·¤Æ³Îǧ¤·¤¿¤é¡¢\n"
-"¼«Æ°Åª¤Ë¼¡¤Î¥¹¥Æ¥Ã¥×¤Ë¿Ê¤ß¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-"¥Ç¥Õ¥©¥ë¥È¤À¤È¡¢DrakX ¤Ï£²¥Ü¥¿¥ó¥Þ¥¦¥¹¤òÁÛÄꤷ¤Æ¡¢Ãæ±û¥Ü¥¿¥ó¤ò¥¨¥ß¥å¥ì¡¼¥È\n"
-"¤¹¤ëÀßÄê¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£DrakX ¤Ï¡¢¤½¤ì¤¬PS/2¥Þ¥¦¥¹¤«USB¥Þ¥¦¥¹¤«¤ò¼«Æ°È½Äê\n"
-"¤·¤Þ¤¹¡£\n"
-"\n"
-"Ê̼ï¤Î¥Þ¥¦¥¹¤ò»ØÄꤹ¤ë¤Ë¤Ï¡¢°ìÍ÷¤«¤éÊ̤Υޥ¦¥¹¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¥Ç¥Õ¥©¥ë¥È°Ê³°¤Î¥Þ¥¦¥¹¤òÁª¤ó¤À¤é¡¢¥Þ¥¦¥¹¤Î¥Æ¥¹¥È²èÌ̤¬½Ð¤Æ¤­¤Þ¤¹¡£\n"
-"¥Ü¥¿¥ó¤ä¥Û¥¤¡¼¥ë¤ò»È¤Ã¤Æ¤ß¤Æ¡¢¤³¤ÎÀßÄê¤Ç¤¤¤¤¤«¤ò³Îǧ¤·¤Þ¤·¤ç¤¦¡£¤¦¤Þ¤¯\n"
-"Æ°¤«¤Ê¤±¤ì¤Ð¡¢¥¹¥Ú¡¼¥¹¤«¡Ö¥ê¥¿¡¼¥ó¡×¤ò²¡¤·¤Æ¥­¥ã¥ó¥»¥ë¤·¤Æ¡¢Áª¤Ó¤Ê¤ª¤·\n"
-"¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Àµ¤·¤¤¥Ý¡¼¥È¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£¤¿¤È¤¨¤Ð¡¢MS ¥¦¥£¥ó¥É¥¦¥º¤Ç¤Î\n"
-"COM1¥Ý¡¼¥È¤Ï¡¢GNU/Linux¤Ç¤Ï ttyS0 ¤È¤¤¤¦Ì¾Á°¤Ë¤Ê¤ê¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"¤µ¤¢¡¢GNU/Linux¥·¥¹¥Æ¥à¤Î¥»¥­¥å¥ê¥Æ¥£¾å¤Ç°ìÈ֤Υ­¥â¤Ë¤ä¤Ã¤Æ¤­¤Þ¤·¤¿¡£\n"
-"root ¥Ñ¥¹¥ï¡¼¥É¤ÎÁªÂò¤Ç¤¹¡£root ¤Ï¥·¥¹¥Æ¥à´ÉÍý¼Ô¤Ç¡¢¥·¥¹¥Æ¥à¤ò¹¹¿·¤·\n"
-"¤¿¤ê¡¢¥æ¡¼¥¶¤òÄɲä·¤¿¤ê¡¢¥·¥¹¥Æ¥àÁ´ÂΤÎÀßÄê¤òÊѤ¨¤¿¤ê¤Ç¤­¤ëÍ£°ì¤Î¸ºß\n"
-"¤Ç¤¹¡£root ¤Ï¤³¤Î¥·¥¹¥Æ¥à¤Ç¤ÏËüǽ¤Ê¤Î¤Ç¤¹¡ª\n"
-"¤À¤«¤é¤³¤½¡¢Â¾¿Í¤Ë¿ä¬¤µ¤ì¤Ê¤¤¥Ñ¥¹¥ï¡¼¥ÉÁª¤Ó¤¬É¬ÍפǤ¹¡£´Êñ¤¹¤®¤¿¤é\n"
-"drakX ¤¬·Ù¹ð¤·¤Þ¤¹¡£¤³¤³¤Ç¼¨¤¹¤è¤¦¤Ë¡¢¥Ñ¥¹¥ï¡¼¥É¤òÆþÎϤ·¤Ê¤¤¤³¤È¤Ï²Äǽ\n"
-"¤Ç¤¹¤¬¡¢¤Ç¤âÀßÄꤹ¤ë¤³¤È¤ò¶¯¤¯¤ª´«¤á¤·¤Þ¤¹¡£¤½¤¦¤¹¤Ù¤­Íýͳ¤¬°ì¤Ä¡§\n"
-"GNU/Linux ¤òµ¯Æ°¤·¤¿¤«¤é¤È¤¤¤Ã¤Æ¡¢¤Û¤«¤Î¥ª¥Ú¥ì¡¼¥Æ¥£¥ó¥°¥·¥¹¥Æ¥à¤¬\n"
-"²¿¤ò¤ä¤Ã¤Æ¤â̵»ö¤È»×¤Ã¤Á¤ã¤¤¤±¤Ê¤¤¡¢¤È¤¤¤¦¤³¤È¤Ç¤¹¡£root¤Ê¤é¤¢¤é¤æ¤ë\n"
-"À©¸Â¤òÆÍÇˤ·¤Æ¡¢¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤½¤Î¤â¤Î¤ò¥¢¥¯¥»¥¹¤·¤Æ¡¢Á´¥Ç¥£¥¹¥¯¤Î\n"
-"¥Ç¡¼¥¿¤ò¤¦¤Ã¤«¤êºï½ü¤·¤Æ¤·¤Þ¤¨¤Þ¤¹¡ª ¤À¤«¤é¡¢root¤Ë¤Ê¤ë¤Î¤Ï¤à¤º¤«¤·¤¯\n"
-"¤·¤Æ¤ª¤¯¤Î¤¬Âç»ö¤Ç¤¹¡£\n"
-"\n"
-"¥Ñ¥¹¥ï¡¼¥É¤Ï¡¢¥¢¥ë¥Õ¥¡¥Ù¥Ã¥È¤È¿ô»ú¤òº®¤¼¤¿¤â¤Î¤Ç¡¢ºÇÄã¤Ç¤â8ʸ»ú¤¬\n"
-"ɬÍפǤ¹¡£·è¤·¤Æ½ñ¤­Î±¤á¤¿¤ê¤·¤Ê¤¤¤Ç¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¥Ñ¥¹¥ï¡¼¥É¤Ï¡¢Ä¹¤¹¤®¤¿¤ê¤ä¤ä¤³¤·¤¹¤®¤¿¤ê¤·¤Æ¤â¤¤¤±¤Þ¤»¤ó¡£³Ú¤Ë³Ð¤¨\n"
-"¤Æ¤ª¤±¤ë¤â¤Î¤Ë¤·¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"¥Ñ¥¹¥ï¡¼¥É¤ÏÆó²óÆþÎϤ·¤Þ¤¹¡£¤³¤Î¤È¤­¤Ë¤Þ¤Á¤¬¤¤¤ò¤¹¤ë¤È¡¢¤Þ¤Á¤¬¤Ã¤¿\n"
-"¤â¤Î¤¬ÅÐÏ¿¤µ¤ì¤Æ¤·¤Þ¤¦¤Î¤Ç¡¢º¤¤Ã¤¿¤³¤È¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-"\n"
-"¥í¡¼¥«¥ë¥Í¥Ã¥È¥ï¡¼¥¯¤ÎÀßÄê¤Ë¤è¤Ã¤Æ¤Ï¡¢NIS ¤ò»È¤¦¤«¤â¤·¤ì¤Þ¤»¤ó¡£\n"
-"¤ï¤«¤é¤Ê¤±¤ì¤Ð¥·¥¹¥Æ¥à´ÉÍý¼Ô¤Ë¤­¤¤¤Æ¤¯¤À¤µ¤¤¡£NIS¤ò»È¤¦¾ì¹ç¤Ë¤Ï\n"
-"¡ÖNIS¤ò»È¤¦¡×¥ª¥×¥·¥ç¥ó¤òÁª¤Ó¤Þ¤¹¡£¡ÖOK¡×¤ò²¡¤·¤¿¤é¡¢É¬ÍפʾðÊó\n"
-"¤òÆþÎϤ·¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-"LILO ¤È GRUB ¤Ï GNU/Linux ¤Îµ¯Æ°¤Ë»È¤ï¤ì¤ë¥Ö¡¼¥È¥í¡¼¥À¤Ç¤¹¡£¤³¤ÎÃʳ¬¤Ï\n"
-"¤Õ¤Ä¤¦¡¢´°Á´¤Ë¼«Æ°²½¤µ¤ì¤Æ¤¤¤Þ¤¹¡£DrakX¤Ï¥Ç¥£¥¹¥¯¤Î¥Ö¡¼¥È¥»¥¯¥¿¤òʬÀϤ·¤Æ\n"
-"¤½¤Î·ë²Ì¤Ë±þ¤¸¤ÆÂбþ¤¹¤ë¤è¤¦¤Ë¤·¤Þ¤¹:\n"
-"\n"
-" * ¤â¤·¥¦¥£¥ó¥É¥¦¥º¤Î¥Ö¡¼¥È¥»¥¯¥¿¤¬¤¢¤ì¤Ð¡¢¤½¤ì¤Ï GRUB/LILO ¥Ö¡¼¥È\n"
-"¥»¥¯¥¿¤Ë½ñ¤­´¹¤¨¤é¤ì¡¢GNU/Linux ¤È Windows¤ÎξÊý¤¬µ¯Æ°²Äǽ¤Ë¤Ê¤ë;\n"
-"\n"
-" * ¤â¤· GRUB ¤« LILO ¥Ö¡¼¥È¥»¥¯¥¿¤¬¸«¤Ä¤«¤ì¤Ð¡¢ºÇ¿·ÈǤ˹¹¿·;\n"
-"\n"
-"¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢drakX ¤Ï³Æ¼ï¥ª¥×¥·¥ç¥ó¤òµó¤²¤¿¥À¥¤¥¢¥í¥°¤òɽ¼¨¤·¤Þ¤¹¡£\n"
-"\n"
-" * »È¤¦¥Ö¡¼¥È¥í¡¼¥À: ÁªÂò»è¤Ï3¤Ä¤¢¤ê¤Þ¤¹:\n"
-"\n"
-"    * LILO¡¢¥°¥é¥Õ¥£¥Ã¥¯¥á¥Ë¥å¡¼¤Ä¤­: ¥°¥é¥Õ¥£¥Ã¥¯¥á¥Ë¥å¡¼¤Ä¤­¤Î LILO ¤¬¤è¤±"
-"¤ì¤Ð¤³¤ì¤ò¡£\n"
-"\n"
-"    * Grub: GRUB (¥Æ¥­¥¹¥È¥á¥Ë¥å¡¼)¤Î¾ì¹ç¡£\n"
-"\n"
-"    * LILO ¥Æ¥­¥¹¥È¥á¥Ë¥å¡¼: ¥Æ¥­¥¹¥È¥á¥Ë¥å¡¼¤Ä¤­ LILO ¤Î¾ì¹ç¡£\n"
-"\n"
-" * ¥Ö¡¼¥È¥Ç¥Ð¥¤¥¹: ¤Û¤È¤ó¤É¤Ï¡¢¥Ç¥Õ¥©¥ë¥È (/dev/hda) ¤Î¤Þ¤Þ¤Ç¤¹¤¬\n"
-"¾ì¹ç¤Ë¤è¤Ã¤Æ¤Ï¥Ö¡¼¥È¥í¡¼¥À¤òÆóÈÖÌܤΥϡ¼¥É¥Ç¥£¥¹¥¯ (/dev/hdb)¤ä¡¢\n"
-"¥Õ¥í¥Ã¥Ô¡¼¥Ç¥£¥¹¥¯¤ËÃÖ¤±¤Þ¤¹ (/dev/fd0)¡£\n"
-"\n"
-" * ¥Ç¥Õ¥©¥ë¥È¥¤¥á¡¼¥¸µ¯Æ°¤ÎÂÔ¤Á»þ´Ö: ¥³¥ó¥Ô¥å¡¼¥¿¤òºÆµ¯Æ°¤·¤¿¤È¤­¡¢\n"
-"¥Ö¡¼¥È¥í¡¼¥À¤Î¥Ç¥Õ¥©¥ë¥È°Ê³°¤Î¥á¥Ë¥å¡¼¤òÁª¤Ö¤¿¤á¤Î»þ´Ö¤ò»ØÄꤷ¤Þ¤¹¡£\n"
-"\n"
-"!! ¥Ö¡¼¥È¥í¡¼¥À¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Ê¤¤¤È¡Ê¤³¤³¤Ç¡Ö¥­¥ã¥ó¥»¥ë¡×¤òÁª¤ó¤À\n"
-"¾ì¹ç¡Ë¡¢¤Û¤«¤ËMandrake Linux¤òµ¯Æ°¤¹¤ëÊýË¡¤ò³ÎÊݤ¹¤ë¤Î¤ò˺¤ì¤Ê¤¤¤Ç\n"
-"¤¯¤À¤µ¤¤¡ª\n"
-"¤Þ¤¿¡¢¤³¤³¤Ç¤Î¥ª¥×¥·¥ç¥ó¤òÊѤ¨¤ë¤Î¤Ï¡¢¤½¤Î°ÕÌ£¤¬Ê¬¤«¤Ã¤Æ¤¤¤ë¿Í¤À¤±¤Ë\n"
-"¤·¤Æ¤¯¤À¤µ¤¤ !!\n"
-"\n"
-"¤³¤Î¥À¥¤¥¢¥í¥°¤Ç¡Ö¹âÅÙ¤ÊÁªÂò¡×¥Ü¥¿¥ó¤ò²¡¤¹¤È¡¢¹âÅ٤ʥ桼¥¶ÀìÍѤÎ\n"
-"³Æ¼ï¾ÜºÙ¥ª¥×¥·¥ç¥ó¤¬½Ð¤Æ¤­¤Þ¤¹¡£\n"
-"\n"
-"Mandrake Linux ¤ÏÆȼ«¤Î¥Ö¡¼¥È¥í¡¼¥À¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¡£¤³¤ì¤Ï\n"
-"GNU/Linux ¤Ç¤â¤½¤Î¾¥·¥¹¥Æ¥à¾å¤Î¤¹¤Ù¤Æ¤Î OS ¤Ç¤âµ¯Æ°¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"Ê̤Υª¥Ú¥ì¡¼¥Æ¥£¥ó¥°¥·¥¹¥Æ¥à¤¬¥·¥¹¥Æ¥à¾å¤Ë¤¢¤ì¤Ð¡¢¼«Æ°Åª¤Ëµ¯Æ°\n"
-"¥á¥Ë¥å¡¼¤ËÄɲ䵤ì¤Þ¤¹¡£´û¸¤Î¥ª¥×¥·¥ç¥ó¤ÎºÙ¤«¤¤ÀßÄê¤â¤Ç¤­¤Þ¤¹¡£\n"
-"´û¸¥¨¥ó¥È¥ê¤ò¥À¥Ö¥ë¥¯¥ê¥Ã¥¯¤¹¤ë¤È¡¢¥Ñ¥é¥á¡¼¥¿¤òÊѤ¨¤¿¤êºï½ü¤·\n"
-"¤¿¤ê¤Ç¤­¤Þ¤¹¡£¡Ö´°Î»¡×¤ò²¡¤»¤Ð¡¢¥¤¥ó¥¹¥È¡¼¥ë¤Î¼¡¤Î¥¹¥Æ¥Ã¥×¤Ø¿Ê¤ß\n"
-"¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) ¤È Grub ¤Ï¥Ö¡¼¥È¥í¡¼¥À¤Ç¤¹¡£¥³¥ó¥Ô¥å¡¼¥¿¾å¤ÎGNU/Linux\n"
-"¤Ê¤É³Æ¼ïOS¤òµ¯Æ°¤Ç¤­¤Þ¤¹¡£\n"
-"ÉáÄ̤ϡ¢¤³¤ì¤é¤ÎOS¤Ï¼«Æ°Åª¤Ë¤­¤Á¤ó¤È¸¡½Ð¤µ¤ì¤Æ¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Þ¤¹¡£\n"
-"¤³¤ì¤¬¥À¥á¤Ê¤é¡¢¤³¤³¤Ç¼êÆ°¤Ç¥¨¥ó¥È¥ê¤òÄɲä·¤Þ¤·¤ç¤¦¡£¥Ñ¥é¥á¡¼¥¿¤ò\n"
-"¤Þ¤Á¤¬¤¨¤Ê¤¤¤è¤¦Ãí°Õ¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¾¤ÎOS¤Ë¤Ï¾¤Î¿Í¤¬¥¢¥¯¥»¥¹¤Ç¤­¤Ê¤¤¤è¤¦¤Ë¤·¤¿¤¤¤³¤È¤â¤¢¤ê¤Þ¤¹¡£¤³¤Î\n"
-"¾ì¹ç¤Ë¤Ï¤½¤ÎOS¤Î¥¨¥ó¥È¥ê¤òºï½ü¤·¤Æ¤ª¤­¤Þ¤·¤ç¤¦¡£¤¿¤À¤·¤³¤Î¾ì¹ç¤Ï¡¢\n"
-"¤½¤ÎOS¤ò»È¤¦¤È¤­¤Ë¤Ïµ¯Æ°¥Ç¥£¥¹¥¯¤¬Íפê¤Þ¤¹¤è¡ª"
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"GNU/Linux¤ò¤¿¤Á¤¢¤²¤ë¤Î¤ËɬÍפʾðÊó¤ò¡¢¤É¤³¤ËÃÖ¤­¤¿¤¤¤«»ØÄꤷ¤Þ¤¹¡£\n"
-"\n"
-"¤è¤¯¤ï¤«¤é¤Ê¤¤¤Ê¤é¡Ö¥É¥é¥¤¥Ö¤ÎºÇ½é¤Î¥»¥¯¥¿(MBR)¡×¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"¤³¤³¤Ç¤Ï¥³¥ó¥Ô¥å¡¼¥¿ÍѤΰõºþ¥·¥¹¥Æ¥à¤òÁª¤Ó¤Þ¤¹¡£Â¾¤ÎOS¤Ç¤Ï°ì¤Ä¤·¤«\n"
-"Ä󶡤µ¤ì¤Ê¤¤°õºþ¥·¥¹¥Æ¥à¤¬¡¢¤³¤³¤Ç¤Ï3¤Ä¤â¤¢¤ê¤Þ¤¹¡£\n"
-"\n"
-" * \"pdq\" - ¤³¤ì¤Ï¡Öprint, don't queue¡Ê°õºþ¤·¤Æ¥­¥å¡¼¤Ï¤·¤Ê¤¤¡Ë¡×\n"
-"¤Ç¤¹¡£¥×¥ê¥ó¥¿¤¬¥Þ¥·¥ó¤Ëľ·ë¤·¤Æ¤¤¤Æ¡¢»æµÍ¤Þ¤ê¤Î¤È¤­¤Ë¤¹¤°ÃæÃǤǤ­\n"
-"¤Æ¡¢¥Í¥Ã¥È¥ï¡¼¥¯¥×¥ê¥ó¥¿¤¬¤Ê¤¤¾ì¹ç¤Ë¤Ï¤³¤ì¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£¥Í¥Ã¥È¥ï¡¼¥¯\n"
-"¤Ï¤´¤¯´Êñ¤Ê¤â¤Î¤·¤«Âбþ¤Ç¤­¤Ê¤¤¤·¡¢¤½¤ì¤Ë¥Í¥Ã¥È¥ï¡¼¥¯¤Ç»È¤¦¤ÈÃÙ¤¯¤Ê¤ê\n"
-"¤Þ¤¹¡£GNU/Linux¤¬½é¤á¤Æ¤Ê¤é¡¢\"pdq\" ¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£¥¤¥ó¥¹¥È¡¼¥ë¸å¤Ç\n"
-"¤âPrinterDrake¤òMandrake ¥³¥ó¥È¥í¡¼¥ë¥»¥ó¥¿¡¼¤«¤éÁª¤ó¤Ç¡Ö¥¨¥­¥¹¥Ñ¡¼¥È¡×\n"
-"¥Ü¥¿¥ó¤ò²¡¤»¤Ð¡¢¸å¤«¤éÁªÂò¤ÏÊѤ¨¤é¤ì¤Þ¤¹¡£\n"
-"\n"
-" * \"CUPS\" - ¡ÖCommon Unix Printing System¡Ê¶¦ÄÌUnix°õºþ¥·¥¹¥Æ¥à¡Ë¡×\n"
-"¤Ï¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¤Ø¤Î°õºþ¤â¡¢Ãϵå¤Î΢¦¤Î¥×¥ê¥ó¥¿¤Ø¤Î°õºþ¤â¸«»ö¤Ë½èÍý\n"
-"¤·¤Þ¤¹¡£¥µ¡¼¥Ð¾õ¤Ë¤â»È¤¨¤ë¤·¡¢ÀΤʤ¬¤é¤Î \"lpd\" °õºþ¥·¥¹¥Æ¥à¤Î¥¯¥é¥¤\n"
-"¥¢¥ó¥È¤Ë¤â¤Ê¤ë¤Î¤Ç¡¢¸Å¤¤¥·¥¹¥Æ¥à¤È¸ß´¹À­¤â¤¢¤ê¤Þ¤¹¡£¤¤¤í¤¤¤í·Ý¤â¤Ç¤­¤Þ\n"
-"¤¹¤¬¡¢´ðËÜŪ¤ÊÀßÄê¤Ï \"pdq\" ¤ÈƱ¤¸¤¯¤é¤¤´Êñ¤Ç¤¹¡£¤³¤ì¤Ë \"lpd\" ¥µ¡¼¥Ð\n"
-"¤ò¥¨¥ß¥å¥ì¡¼¥È¤·¤Æ¤Û¤·¤±¤ì¤Ð¡¢\"cups-lpd\" ¥Ç¡¼¥â¥ó¤òÍ­¸ú¤Ë¤·¤Þ¤·¤ç¤¦¡£\n"
-"°õºþ¤ä¥×¥ê¥ó¥¿¥ª¥×¥·¥ç¥óÁªÂòÍѤ˥°¥é¥Õ¥£¥Ã¥¯¥Õ¥í¥ó¥È¥¨¥ó¥É¤â¤¢¤ê¤Þ¤¹¡£\n"
-"\n"
-" * \"lprNG\" - ¡Öline printer daemon New Generation¡Ê¥é¥¤¥ó¥×¥ê¥ó¥¿¥Ç¡¼¥â¥ó\n"
-"¥Ë¥å¡¼¥¸¥§¥Í¥ì¡¼¥·¥ç¥ó¡Ë¡×¡£¤³¤ì¤Ï¾¤Î¥ª¥×¥·¥ç¥ó¤È¤Û¤ÜƱ¤¸¤³¤È¤¬¤Ç¤­¤Þ¤¹¤¬\n"
-"IPX¥×¥í¥È¥³¥ë¤ò¥µ¥Ý¡¼¥È¤·¤Æ¤¤¤ë¤Î¤ÇNovell Network¾å¤Î¥×¥ê¥ó¥¿¤Ç¤â°õºþ¤Ç¤­\n"
-"¤ë¤·¡¢¥·¥§¥ë¥³¥Þ¥ó¥É¤ØľÀÜ°õºþ¤â¤Ç¤­¤Þ¤¹¡£Novell ¤¬É¬ÍפÀ¤Ã¤¿¤ê¡¢¥Ñ¥¤¥×\n"
-"¤ò»È¤ï¤º¤Ë¥³¥Þ¥ó¥É¤Ø°õºþ¤·¤¿¤±¤ì¤Ð lprNG¤ò»È¤¤¤Þ¤·¤ç¤¦¡£\n"
-"¤µ¤â¤Ê¤±¤ì¤Ð¡¢CUPS ¤Î¤Û¤¦¤¬´Êñ¤À¤·¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Ç¤ÎÀ­Ç½¤¬Í¥¤ì¤Æ¤¤¤ë¤Î¤Ç\n"
-"CUPS¤Ë¤·¤Þ¤·¤ç¤¦¡£"
-
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX¤Ï¥Þ¥·¥ó¾å¤ÎIDE¥Ç¥Ð¥¤¥¹¤òÁ´Éô¸«¤Ä¤±¤è¤¦¤È¤·¤Þ¤¹¡£¤Þ¤¿PCI SCSI\n"
-"¥¢¥À¥×¥¿¤â¤¢¤ì¤Ð¸¡½Ð¤·¤è¤¦¤È¤·¤Þ¤¹¡£SCSI¥«¡¼¥É¤ß¤Ä¤±¤¿¤é¡¢Å¬Àڤʥɥ饤¥Ð\n"
-"¤ò¼«Æ°Åª¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¡£\n"
-"\n"
-"¥Ï¡¼¥É¥¦¥§¥¢¸¡½Ð¤Ï¤È¤­¤É¤­¼ºÇÔ¤¹¤ë¤³¤È¤â¤¢¤ë¤Î¤Ç¡¢DrakX¤ÏPCI SCSI¥¢¥À\n"
-"¥×¥¿¤¬¥·¥¹¥Æ¥à¤Ë¤¢¤ë¤«¤É¤¦¤«³Îǧ¤¹¤ë¤è¤¦Ê¹¤¤¤Æ¤­¤Þ¤¹¡£¤â¤·Â¸ºß¤¹¤ë¤Ê¤é\n"
-"¡Ö¤Ï¤¤¡×¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤È¡¢¥¢¥À¥×¥¿¤Î¥É¥é¥¤¥Ð°ìÍ÷¤òɽ¼¨¤¹¤ë¤Î¤Ç¡¢¤½\n"
-"¤³¤«¤éÁª¤Ó¤Þ¤·¤ç¤¦¡£SCSI ¤¬¤Ê¤±¤ì¤Ð¡Ö¤¤¤¤¤¨¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤¹¡£\n"
-"¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢¡Ö¥Ï¡¼¥É¥¦¥§¥¢¾ðÊó¤ò¸«¤ë¡×¤òÁª¤ó¤ÇOK¤ò¥¯¥ê¥Ã¥¯¤·¡¢\n"
-"¥Ï¡¼¥É¥¦¥§¥¢°ìÍ÷¤ò¸«¤ë¤³¤È¤â¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"¼êÆ°¤Ç¥¢¥À¥×¥¿¤ò»ØÄꤷ¤¿¾ì¹ç¤Ë¤Ï¡¢DrakX¤Ï¥ª¥×¥·¥ç¥ó»ØÄê¤ò¤·¤¿¤¤¤«¤É¤¦¤«\n"
-"¼ÁÌ䤷¤Æ¤­¤Þ¤¹¡£DrakX¤Ë¥Ï¡¼¥É¥¦¥§¥¢¤ò¥×¥í¡¼¥Ö¤µ¤»¤Æ¡¢¥ª¥×¥·¥ç¥ó¤ò·è¤á¤µ¤»\n"
-"¤Þ¤·¤ç¤¦¡£¤¿¤¤¤Æ¤¤¤³¤ì¤Ç¤¦¤Þ¤¯Æ¯¤­¤Þ¤¹¡£\n"
-"\n"
-"¤â¤·É¬Í×¥ª¥×¥·¥ç¥ó¤òDrakX¤¬¼«Æ°Åª¤Ë¼èÆÀ¤Ç¤­¤Ê¤±¤ì¤Ð¥À¥á¤Ê¤é¡¢¥É¥é¥¤¥Ð¤Ë\n"
-"¼«Ê¬¤Ç¥ª¥×¥·¥ç¥ó¤òÍ¿¤¨¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£\n"
-"¥æ¡¼¥¶¥¬¥¤¥É¡Ê3¾Ï¡¢¡Ö¥Ï¡¼¥É¥¦¥§¥¢¤Ë¤Ä¤¤¤Æ¤Î¾ðÊó¼ý½¸¡×¡Ë¤«¤é¡¢¤³¤ì¤Ë´Ø¤ï¤ë\n"
-"¾ðÊó¤ò¥Ï¡¼¥É¤Î¥Þ¥Ë¥å¥¢¥ë¤ä¥á¡¼¥«¡¼ Web ¥µ¥¤¥È¡Ê¥Í¥Ã¥È¤Ë¥¢¥¯¥»¥¹¤Ç¤­¤ì¤Ð¡Ë\n"
-"¤¢¤ë¤¤¤Ï¡Ê¥·¥¹¥Æ¥à¾å¤Ë¤¢¤ì¤Ð¡ËMS Windows ¤«¤é¤É¤¦¤ä¤Ã¤ÆɬÍ×¾ðÊó¤òÆÀ¤ë¤«\n"
-"¤òÄ´¤Ù¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"yabootÍѤÎÄɲ娥ó¥È¥ê¤ò¤³¤³¤ÇÄɲäǤ­¤Þ¤¹¡£Â¾¤ÎOS¤Î¾ì¹ç¤Ç¤â¡¢Â¾¤Î\n"
-"¥«¡¼¥Í¥ë¤Ç¤â¡¢¶ÛµÞÍѵ¯Æ°¥¤¥á¡¼¥¸¤Ç¤â²Äǽ¤Ç¤¹¡£\n"
-"\n"
-"¤Û¤«¤ÎOS¤Î¾ì¹ç - ¥¨¥ó¥È¥ê¤Ï¡¢¥é¥Ù¥ë¤Èroot¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤À¤±¤Ç¤¹¡£\n"
-"\n"
-"Linux ¤Î¾ì¹ç¡¢²Äǽ¤Ê¥ª¥×¥·¥ç¥ó¤¬¤¤¤¯¤Ä¤«¤¢¤ê¤Þ¤¹: \n"
-"\n"
-"  * ¥é¥Ù¥ë: ¤³¤Îµ¯Æ°¥ª¥×¥·¥ç¥ó¤òÁª¤Ö¤È¤­¤Ë¡¢yaboot¥×¥í¥ó¥×¥È¤Ç¥¿¥¤¥×\n"
-"¤¹¤ë̾¾Î¡£\n"
-"\n"
-"  * ¥¤¥á¡¼¥¸: µ¯Æ°¤¹¤ë¥«¡¼¥Í¥ë¤Î̾¾Î¡£ÉáÄÌ¤Ï vmlinux¡¢¤Þ¤¿¤Ï\n"
-"¤½¤ì¤Ë¤Ê¤Ë¤«³ÈÄ¥»Ò¤¬¤Ä¤¤¤¿¤â¤Î¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-"\n"
-"  * µ¯Æ°: Linux¥¤¥ó¥¹¥È¡¼¥ëÍѤÎroot¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Þ¤¿¤Ï¡Ö/¡×\n"
-"\n"
-"  \n"
-"  * ÄɲÃ: Apple ¤Î¥Ï¡¼¥É¥¦¥§¥¢¤Ç¤Ï¡¢¥«¡¼¥Í¥ëÄɲ媥ץ·¥ç¥ó¤Ï¤«¤Ê¤ê¤Î¾ì¹ç\n"
-"¥Ó¥Ç¥ª¥Ï¡¼¥É¥¦¥§¥¢¤Î½é´ü²½¤Ë»È¤Ã¤¿¤ê¡¢1¥Ü¥¿¥ó¥Þ¥¦¥¹ÍѤ˥­¡¼¥Ü¡¼¥É¤Ë¤è¤ë\n"
-"¥Þ¥¦¥¹¥Ü¥¿¥ó¤Î¥¨¥ß¥å¥ì¡¼¥·¥ç¥ó¤Ë»È¤Ã¤¿¤ê¤·¤Þ¤¹¡£°Ê²¼¤ËÎã¤òµó¤²¤Þ¤¹:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-"  * Initrd: ¤³¤Î¥ª¥×¥·¥ç¥ó¤Ï¡¢µ¯Æ°¥Ç¥Ð¥¤¥¹¤¬Í­¸ú¤Ë¤Ê¤ëÁ°¤Ë½é´ü¥â¥¸¥å¡¼¥ë\n"
-"¤Î¥í¡¼¥É¤«¡¢¤¢¤ë¤¤¤Ï¶ÛµÞµ¯Æ°»þ¤Îramdisk ¥¤¥á¡¼¥¸¤Î¥í¡¼¥É¤Ë»È¤¤¤Þ¤¹¡£\n"
-"\n"
-"  * Initrd-size: ¥Ç¥Õ¥©¥ë¥È¤Î ramdisk ¥µ¥¤¥º¤Ï4096 ¥Ð¥¤¥È¤Ç¤¹¡£\n"
-"¤â¤Ã¤ÈÂ礭¤Ê ramdisk ¤ò»È¤¦¤È¤­¤Ë¡¢¤³¤Î¥ª¥×¥·¥ç¥ó¤ò»ÈÍѤ·¤Þ¤¹¡£\n"
-"\n"
-"  * Read-write: Ä̾¡Öroot¡×¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ÏÆɤ߽Ф·ÀìÍѤǵ¯Æ°¤·¡¢\n"
-"¥·¥¹¥Æ¥à¤¬¡ÖΩ¤Á¾å¤¬¤ë¡×Á°¤Ë¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤Î¥Á¥§¥Ã¥¯¤ò¤·¤Þ¤¹¡£¤³¤Î\n"
-"¥ª¥×¥·¥ç¥ó¤Ç¤³¤ì¤ò¥ª¡¼¥Ð¡¼¥é¥¤¥É¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"  * NoVideo: Apple ¤Î¥Ó¥Ç¥ª²óÏ©¤¬¶Ëü¤ËÌäÂê¤òµ¯¤³¤¹¤è¤¦¤Ê¤é¡¢¤³¤Î\n"
-"¥ª¥×¥·¥ç¥ó¤òÁª¤ó¤Ç¡Ö¥Ó¥Ç¥ª¤Ê¤·¡×¥â¡¼¥É¤Çµ¯Æ°¤Ç¤­¤Þ¤¹¡£¤³¤Î¾ì¹ç¤Ë¤Ï\n"
-"¥Í¥¤¥Æ¥£¥Ö¤Î¥Õ¥ì¡¼¥à¥Ð¥Ã¥Õ¥¡¤Çµ¯Æ°¤·¤Þ¤¹¡£\n"
-"\n"
-"  * ¥Ç¥Õ¥©¥ë¥È: ¥Ç¥Õ¥©¥ë¥È¤Î Linux ¤ÎÁªÂò¤È¤·¤Æ¤³¤Î¥¨¥ó¥È¥ê¤¬»È¤ï¤ì\n"
-"¤Þ¤¹¡£¤³¤ì¤Ïñ¤Ë¡¢yaboot ¥×¥í¥ó¥×¥È¤Ç ENTER ¤ò²¡¤»¤ÐÁª¤Ù¤Þ¤¹¡£¤³¤Î\n"
-"¥¨¥ó¥È¥ê¤Ï¤Þ¤¿¡¢TAB¤ò²¡¤·¤Æµ¯Æ°»þ¤ÎÁªÂò»è¤òɽ¼¨¤µ¤»¤¿¤È¤­¤Ë¤Ï¡¢\n"
-"¡Ö*¡×¤¬¤Ä¤¤¤Æ¥Ï¥¤¥é¥¤¥È¤µ¤ì¤Æ¤¤¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot ¤Ï¡¢NewWorld MacIntosh ¥Ï¡¼¥É¥¦¥§¥¢ÍѤΥ֡¼¥È¥í¡¼¥À¤Ç¤¹¡£¤³¤ì¤¬\n"
-"¤¢¤ë¤È¡¢¥Þ¥·¥ó¾å¤ÎGNU/Linux, MacOS, MacOSX ¤òµ¯Æ°»þ¤ËÁª¤Ù¤Þ¤¹¡£\n"
-"¤Õ¤Ä¤¦¡¢¤³¤¦¤·¤¿ GNU/Linux °Ê³°¤Î OS ¤Ï¼«Æ°Åª¤Ë¤­¤Á¤ó¤È¸¡½Ð¤µ¤ì¤Æ\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Þ¤¹¡£¤â¤·¥À¥á¤Ê¤é¡¢¤³¤Î²èÌ̤ǡ¢¼«Ê¬¤Ç¥¨¥ó¥È¥ê¤òÄɲÃ\n"
-"¤Ç¤­¤Þ¤¹¡£Àµ¤·¤¤¥Ñ¥é¥á¡¼¥¿¤òÁª¤Ö¤è¤¦Ãí°Õ¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"Yaboot ¤Î¼ç¥ª¥×¥·¥ç¥ó¤Ï:\n"
-"\n"
-"  * µ¯Æ°¥á¥Ã¥»¡¼¥¸: boot¥×¥í¥ó¥×¥ÈÁ°¤Ëɽ¼¨¤µ¤ì¤ë´Êñ¤Ê¥á¥Ã¥»¡¼¥¸\n"
-"\n"
-"  * µ¯Æ°¥Ç¥Ð¥¤¥¹: GNU/Linux µ¯Æ°ÍѤξðÊó¤ò¤É¤³¤ËÃÖ¤¯¤«»Ø¼¨¡£\n"
-"ÉáÄ̤ϡ¢¤³¤Î¾ðÊóÍѤ˥֡¼¥È¥¹¥È¥é¥Ã¥×ÍѤΥѡ¼¥Æ¥£¥·¥ç¥ó¤ò\n"
-"¤³¤ÎÁ°¤ÎÃʳ¬¤Çºî¤Ã¤Æ¤¢¤ë¤Ï¤º¤Ç¤¹¡£\n"
-"\n"
-"  * ¥ª¡¼¥×¥ó¥Õ¥¡¡¼¥à¥¦¥§¥¢¤ÎÂÔ¤Á»þ´Ö: LILO ¤È¤Á¤¬¤Ã¤Æ¡¢yaboot¤Ë¤ÏÂÔ¤Á»þ´Ö\n"
-"¤¬Æó¼ïÎàÀßÄê¤Ç¤­¤Þ¤¹¡£ºÇ½é¤ÎÂÔ¤Á»þ´Ö¤ÏÉÃñ°Ì¤Ç¡¢¤³¤ÎÂÔ¤Á»þ´Ö¤Î´Ö¤Ë¡¢\n"
-"CD, OF boot, MacOS, Linux¤Î¤É¤ì¤òµ¯Æ°¤¹¤ë¤«Áª¤Ù¤Þ¤¹¡£\n"
-"\n"
-"  * ¥«¡¼¥Í¥ëµ¯Æ°¥¿¥¤¥à¥¢¥¦¥È: ¤³¤Î¥¿¥¤¥à¥¢¥¦¥È¤Ï LILO µ¯Æ°ÂÔ¤Á»þ´Ö¤È»÷¤Æ¤¤¤Þ"
-"¤¹¡£Linux ¤òÁª¤ó¤À¤é¡¢¤³¤ÎÂÔ¤Á»þ´Ö¤¬0.1ÉÃñ°Ì¤Ç¼Â¹Ô¤µ¤ì¤Æ¡¢¤½¤Î¤Þ¤Þ\n"
-"¤À¤È¥Ç¥Õ¥©¥ë¥È¤Î¥«¡¼¥Í¥ëµ­½Ò¤¬Áª¤Ð¤ì¤Þ¤¹¡£\n"
-"\n"
-"  - CD µ¯Æ°¤òÍ­¸ú¤Ë¤·¤Þ¤¹¤«?: ¤³¤Î¥ª¥×¥·¥ç¥ó¤ò¥Á¥§¥Ã¥¯¤¹¤ë¤È¡¢ºÇ½é¤Îµ¯Æ°¥×¥í"
-"¥ó¥×¥È¤Ç¡ÖC¡×¤òÁª¤ó¤ÇCD¤«¤éµ¯Æ°¤Ç¤­¤ë¤è¤¦¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-"\n"
-"  * OF µ¯Æ°¤òÍ­¸ú¤Ë¤·¤Þ¤¹¤«?: ¤³¤Î¥ª¥×¥·¥ç¥ó¤ò¥Á¥§¥Ã¥¯¤¹¤ë¤È¡¢ºÇ½é¤Îµ¯Æ°¥×¥í"
-"¥ó¥×¥È¤Ç¡ÖN¡×¤òÁª¤ó¤Ç¥ª¡¼¥×¥ó¥Õ¥¡¡¼¥à¥¦¥§¥¢¤«¤éµ¯Æ°¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"  * ¥Ç¥Õ¥©¥ë¥È OS: ¥ª¡¼¥×¥ó¥Õ¥¡¡¼¥à¥¦¥§¥¢¤ÎÂÔ¤Á»þ´Ö¤¬²á¤®¤¿¤È¤­¡¢¤É¤Î\n"
-"OS¤¬µ¯Æ°¤¹¤ë¤«¤ò»ØÄꤷ¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-"¤¢¤Ê¤¿¤Î¥Þ¥·¥ó¤Ë´Ø¤¹¤ë³Æ¼ï¤Î¥Ñ¥é¥á¡¼¥¿¤ò¼¨¤·¤Þ¤¹¡£¥Ï¡¼¥É¥¦¥§¥¢¤Ë¤â\n"
-"¤è¤ê¤Þ¤¹¤¬¡¢°Ê²¼¤Î¤è¤¦¤Ê¹àÌܤ¬½Ð¤Æ¤¯¤ë¤Ï¤º¤Ç¤¹:\n"
-"\n"
-" * ¥Þ¥¦¥¹: ¥Þ¥¦¥¹¡£¸½ºß¤Î¥Þ¥¦¥¹ÀßÄê¤ò¸«¤Æ¡¢É¬Íפʤé¥Ü¥¿¥ó¤ò¥¯¥ê¥Ã¥¯¤·¤ÆÊѹ¹¤·"
-"¤Þ¤¹¡£\n"
-"\n"
-" * ¥­¡¼¥Ü¡¼¥É¡§¥­¡¼¥Ü¡¼¥É¡£¤¤¤Þ¤Î¥­¡¼¥Ü¡¼¥É¤Î³äÉÕÀßÄê¤ò¸«¤Æ¡¢É¬Íפʤé\n"
-"¥Ü¥¿¥ó¤ò¥¯¥ê¥Ã¥¯¤·¤ÆÊѹ¹¤·¤Þ¤¹¡£\n"
-"\n"
-" * »þ´ÖÂÓ: »þ´ÖÂÓ¡¡DrakX ¤Ï¥Ç¥Õ¥©¥ë¥È¤Ç¡¢¤¢¤Ê¤¿¤ÎÁª¤ó¤À¸À¸ì¤Ë±þ¤¸¤Æ\n"
-"»þ´ÖÂÓ¤ò¿äÄꤷ¤Þ¤¹¡£¤Ç¤â¤³¤³¤Ç¤â¥­¡¼¥Ü¡¼¥É¤ÎÁªÂò¤ÈƱ¤¸¤Ç¡¢¸À¸ì¤È¤Ï\n"
-"¤Á¤¬¤¦¹ñ¤Ë¤¤¤ë¤È¤­¤Ë¤Ï¡¢»þ´ÖÂӥܥ¿¥ó¤ò²¡¤·¤Æ¡¢¼«Ê¬¤Î»þ´ÖÂӤˤ¢¤ï¤»¤¿\n"
-"ÀßÄê¤Ë¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-" * ¥×¥ê¥ó¥¿: ¡Ö¥×¥ê¥ó¥¿¤Ê¤·¡×¥Ü¥¿¥ó¤ò²¡¤¹¤È¡¢¥×¥ê¥ó¥¿ÀßÄꥦ¥£¥¶¡¼¥É\n"
-"¤¬³«¤­¤Þ¤¹¡£\n"
-"\n"
-" * ¥µ¥¦¥ó¥É¥«¡¼¥É: ¥µ¥¦¥ó¥É¥«¡¼¥É¤¬¸¡½Ð¤µ¤ì¤¿¤é¤³¤³¤Ëɽ¼¨¤µ¤ì¤Þ¤¹¡£\n"
-"¥¤¥ó¥¹¥È¡¼¥ë»þ¤Ë¤ÏÊѹ¹¤Ç¤­¤Þ¤»¤ó¡£\n"
-"\n"
-" * TV ¥«¡¼¥É: TV ¥«¡¼¥É¤¬¸¡½Ð¤µ¤ì¤¿¤é¤³¤³¤Ëɽ¼¨¤µ¤ì¤Þ¤¹¡£\n"
-"¥¤¥ó¥¹¥È¡¼¥ë»þ¤Ë¤ÏÊѹ¹¤Ç¤­¤Þ¤»¤ó¡£\n"
-"\n"
-" * ISDN ¥«¡¼¥É: ISDN ¸¡½Ð¤µ¤ì¤¿¤é¤³¤³¤Ëɽ¼¨¤µ¤ì¤Þ¤¹¡£\n"
-"¥Ü¥¿¥ó¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤È´ØÏ¢¥Ñ¥é¥á¡¼¥¿¤¬ÊѤ¨¤é¤ì¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"¿·¤·¤¤ Mandrake Linux ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Î¥¤¥ó¥¹¥È¡¼¥ëÍѤ˾õ¤¿¤¤\n"
-"¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£¤½¤Î¥Ï¡¼¥É¥Ç¥£¥¹¥¯¾å¤Î¥Ç¡¼¥¿¤ÏÁ´Éô\n"
-"¾Ã¤¨¤Æ²óÉü¤Ç¤­¤Þ¤»¤ó¡£Ãí°Õ¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"¤³¤Î¥Ï¡¼¥É¥Ç¥£¥¹¥¯¾å¤Î¤¹¤Ù¤Æ¤Î¥Ç¡¼¥¿¤ä¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò\n"
-"¾Ãµî¤¹¤ë¤Ê¤é¡ÖOK¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£¡ÖOK¡×¤ò¥¯¥ê¥Ã¥¯¤·¤¿¤é¡¢\n"
-"¤³¤Î¥Ï¡¼¥É¥Ç¥£¥¹¥¯¾å¤Ëº£¤¢¤ë¥Ç¡¼¥¿¤ä¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¡¢¥¦¥£¥ó¥É¥¦¥º\n"
-"¤Î¤â¤Î¤ò´Þ¤á¡¢¤¹¤Ù¤Æ¾Ãµî¤µ¤ì¤Æ²óÉüÉÔ²Äǽ¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-"\n"
-"¤³¤ÎÁàºî¤ò¼è¤ê¤ä¤á¤Æ¡¢¥Ï¡¼¥É¥Ç¥£¥¹¥¯¾å¤Î¥Ç¡¼¥¿¤ä¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò\n"
-"¤½¤Î¤Þ¤Þ¤Ë¤·¤Æ¤ª¤¯¤Ë¤Ï¡Ö¥­¥ã¥ó¥»¥ë¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£"
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-"¥«¡¼¥Í¥ë¤ËÂбþ¤·¤¿¥«¡¼¥Í¥ë¥â¥¸¥å¡¼¥ë¤ò¥¢¥¯¥»¥¹¤Ç¤­¤Þ¤»¤ó¡Ê¥Õ¥¡¥¤¥ë%s¤¬¤¢¤ê¤Þ"
-"¤»¤ó)"
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"°Ê²¼¤Î¥µ¡¼¥Ð¤òÁª¤Ó¤Þ¤·¤¿¤Í: %s\n"
-"\n"
-"\n"
-"¤³¤ì¤é¤Î¥µ¡¼¥Ð¤Ï¥Ç¥Õ¥©¥ë¥È¤ÇÍ­¸ú¤Ë¤Ê¤ê¤Þ¤¹¡£Æä˥»¥­¥å¥ê¥Æ¥£¾å¤Î\n"
-"ÌäÂê¤Ï¤Ê¤¤¤è¤¦¤Ç¤¹¤¬¡¢¤³¤ÎÀèȯÀ¸¤¹¤ë¤³¤È¤â¤¢¤ê¤Þ¤¹¡£¤½¤Î¾ì¹ç¤Ë¤Ï\n"
-"¤¹¤°¤Ë¥¢¥Ã¥×¥°¥ì¡¼¥É¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"\n"
-"ËÜÅö¤Ë¤³¤Î¥µ¡¼¥Ð¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Æ¤¤¤¤¤Ç¤¹¤Í¡©\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "NIS ¥É¥á¥¤¥ó¤¬¤Ê¤¤¤Î¤Ç¥Ö¥í¡¼¥É¥­¥ã¥¹¥È¤¬»È¤¨¤Þ¤»¤ó"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "FAT·Á¼°¤Î¥Õ¥í¥Ã¥Ô¡¼¤ò¥É¥é¥¤¥Ö %s ¤ËÁÞÆþ"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "¤³¤Î¥Õ¥í¥Ã¥Ô¡¼¤Ï FAT¥Õ¥©¡¼¥Þ¥Ã¥È¤¸¤ã¤¢¤ê¤Þ¤»¤ó"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"¤³¤ÎÊݸ¤·¤¿¥Ñ¥Ã¥±¡¼¥¸ÁªÂò¤ò»È¤¦¤Ë¤Ï¡¢¥¤¥ó¥¹¥È¡¼¥ë¤Îµ¯Æ°»þ¤Ë¡Ölinux "
-"defcfg=floppy¡×¤È»ØÄꤷ¤Þ¤¹¡£"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "¥Õ¥¡¥¤¥ë %s ¤ÎÆɤߤȤꥨ¥é¡¼¤Ç¤¹"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "OK"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"¤¢¤Ê¤¿¤Î¥Þ¥·¥ó¾å¤Î¥Ï¡¼¥É¤ÎÃæ¤Ë¤Ï¡¢¡ÖÈó¸ø³«¤Î¡×¥É¥é¥¤¥Ð¤¬É¬Íפʤâ¤Î¤¬\n"
-"¤¢¤ê¤Þ¤¹¡£°Ê²¼¤Î¾ðÊó¤ò¸«¤Æ¤¯¤À¤µ¤¤: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"root ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¸«¤¢¤¿¤ê¤Þ¤»¤ó¤Í¡£¤³¤ì¤ÏÀäÂФËɬÍפǤ¹¡£\n"
-"¿·¤·¤¯¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¤Ä¤¯¤ë¤«¡¢´û¸¤Î¤â¤Î¤ò¥¯¥ê¥Ã¥¯¤·¤ÆÁª¤Ó¤Þ¤¹¡£\n"
-"¤½¤·¤Æ¡È¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È¡É¥¢¥¯¥·¥ç¥ó¤òÁª¤Ó¡¢¡Ö/¡×¤Ë¥»¥Ã¥È¤·¤Þ¤¹"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "¥¹¥ï¥Ã¥×¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬É¬ÍפǤ¹"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"¥¹¥ï¥Ã¥×¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¤¢¤ê¤Þ¤»¤ó\n"
-"\n"
-"¹½¤ï¤º¤Ë³¤±¤Þ¤¹¤«¡©"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "/boot/efi ¤Ë FAT ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥Þ¥¦¥ó¥È¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "¥Õ¥ê¡¼¥¹¥Ú¡¼¥¹¤Î»ÈÍÑ"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "¿·¤·¤¤¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë³ä¤êÅö¤Æ¤ë½½Ê¬¤Ê¥Õ¥ê¡¼¥¹¥Ú¡¼¥¹¤¬¤¢¤ê¤Þ¤»¤ó"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "´û¸¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò»ÈÍÑ"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "¸ºß¤·¤Ê¤¤¥Ñ¡¼¥Æ¥£¥·¥ç¥ó"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Windows ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥ë¡¼¥×¥Ð¥Ã¥¯¤Ë»ÈÍÑ"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "¤É¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ËLinux4Win¤òÆþ¤ì¤Þ¤¹¤«"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "¥µ¥¤¥º¤òÁªÂò"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "¥ë¡¼¥È¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Î¥µ¥¤¥º (MB)"
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "¥¹¥ï¥Ã¥×¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Î¥µ¥¤¥º (MB): "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "¥¦¥£¥ó¥É¥¦¥º¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¾å¤Î¥Õ¥ê¡¼¥¹¥Ú¡¼¥¹¤ò»ÈÍÑ"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "¤É¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥ê¥µ¥¤¥º¤·¤Þ¤¹¤«¡©"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "¥¦¥£¥ó¥É¥¦¥º¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤Î¶­³¦¤ò·×»»"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT ¥ê¥µ¥¤¥¶¡¼¤Ï¥Ñ¡¼¥Æ¥£¥·¥ç¥óÁàºî¤¬¤Ç¤­¤Þ¤»¤ó¡£\n"
-"°Ê²¼¤Î¥¨¥é¡¼¤¬È¯À¸: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "¥¦¥£¥ó¥É¥¦¥º¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬ÃÇÊÒ²½¤·¤¹¤®¤Ç¤¹¡£¡È¥Ç¥Õ¥é¥°¡É¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"Ãí°Õ¡ª\n"
-"\n"
-"DrakX ¤Ï¤³¤ì¤«¤é¥¦¥£¥ó¥É¥¦¥º¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥µ¥¤¥º¤òÊѹ¹¤·¤Þ¤¹¡£\n"
-"Ãí°Õ:¤³¤ÎÁàºî¤Ï´í¸±¤Ç¤¹¡£¤Þ¤À¥ê¥µ¥¤¥º¤·¤Æ¤¤¤Ê¤¤¤Î¤Ê¤é¡¢¤¤¤Á¤É¥¤¥ó¥¹¥È¡¼¥ë¤ò\n"
-"ÃæÃǤ·¡¢scandisk¤ò¤«¤±¤Þ¤·¤ç¤¦¡Ê¤µ¤é¤Ëdefrag¤â¤«¤±¤¿¤Û¤¦¤¬¤¤¤¤¤Ç¤¹)¡£\n"
-"¥Ç¡¼¥¿¤â¥Ð¥Ã¥¯¥¢¥Ã¥×¤·¤Æ¤¢¤ê¤Þ¤¹¤«¡©¡¡¤¤¤Þ¤Î¤¦¤Á¤Ë¤·¤Æ\n"
-"¤ª¤¤¤Æ¤¯¤À¤µ¤¤¡£\n"
-"Âç¾æÉפʤé Ok ¤ò²¡¤·¤Æ²¼¤µ¤¤¡£"
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "¥¦¥£¥ó¥É¥¦¥ºÍѤˤɤΤ¯¤é¤¤¤Î¥µ¥¤¥º¤ò»Ä¤·¤Æ¤ª¤­¤Þ¤¹¤¬"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT ¤Î¥ê¥µ¥¤¥º¤Ë¼ºÇÔ: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"¥ê¥µ¥¤¥º¤ä¥ë¡¼¥×¥Ð¥Ã¥¯ÍѤÎFAT¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¤¢¤ê¤Þ¤»¤ó (¤Þ¤¿¤Ï½½Ê¬¤Ê¥¹¥Ú¡¼¥¹"
-"¤¬Ìµ¤¤)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Á´¥Ç¥£¥¹¥¯¾Ãµî"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Windows(TM) ¤òºï½ü"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Ê£¿ô¤Î¥Ï¡¼¥É¥É¥é¥¤¥Ö¤ò»ý¤Ã¤Æ¤¤¤Þ¤¹¤Í¡¢¤É¤ì¤Ë linux ¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "¥É¥é¥¤¥Ö %s ¾å¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ª¤è¤Ó¥Ç¡¼¥¿¤ÏÁ´Éô¼º¤ï¤ì¤Þ¤¹"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¼«Ê¬¤Ç»ØÄê"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "fdisk¤ò»È¤¦"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"%s ¤ò¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ç¤­¤Þ¤¹¡£\n"
-"½ª¤ï¤Ã¤¿¤é¡¢É¬¤º¡Öw¡×¤ò»È¤Ã¤ÆÊݸ¤·¤Þ¤·¤ç¤¦¡£"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "¥¦¥£¥ó¥É¥¦¥º¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¾å¤Î¥Õ¥ê¡¼¥¹¥Ú¡¼¥¹¤¬Â­¤ê¤Þ¤»¤ó"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ëÍѤζõ¤­¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó¤¬"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥¦¥£¥¶¡¼¥É¤Ï°Ê²¼¤Î²òË¡¤ò¸«ÉÕ¤±¤Þ¤·¤¿:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥Ë¥ó¥°¤Ë¼ºÇÔ: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤ò¤¿¤Á¤¢¤²¤ë"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤òÄä»ß¤¹¤ë"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"¥¨¥é¡¼È¯À¸¡¤¤¦¤Þ¤¯½èÍý¤¹¤ëÊýË¡¤¬¤ï¤«¤ê¤Þ¤»¤ó¡£\n"
-"¼«Ê¬¤ÎÀÕǤ¤Ç³¤±¤Æ²¼¤µ¤¤¡£"
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È %s ¤¬½Å¤Ê¤Ã¤Æ¤¤¤Þ¤¹"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"¤À¤¤¤¸¤Ê¥Ñ¥Ã¥±¡¼¥¸¤¬¤¤¤¯¤Ä¤«¤­¤Á¤ó¤È¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Þ¤»¤ó¤Ç¤·¤¿¡£\n"
-"CD-ROM¤«¡¢CD-ROM¤Î¥É¥é¥¤¥Ö¤¬¤ª¤«¤·¤¤¤è¤¦¤Ç¤¹¡£\n"
-"¥¤¥ó¥¹¥È¡¼¥ëºÑ¤ß¤Î¥³¥ó¥Ô¥å¡¼¥¿¤Ç¡¢°Ê²¼¤Î¥³¥Þ¥ó¥É¤ÇCD-ROM¤ò¥Á¥§¥Ã¥¯\n"
-"¤·¤Æ¤ß¤Æ¤¯¤À¤µ¤¤¡§\n"
-"¡Ö rpm -qpl Mandrake/RPMS/*.rpm ¡×\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "%s ¤Ø¤è¤¦¤³¤½"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Í­¸ú¤Ê¥Õ¥í¥Ã¥Ô¡¼¥É¥é¥¤¥Ö¤¬¤¢¤ê¤Þ¤»¤ó"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "¥¹¥Æ¥Ã¥× ¡Ö%s¡×¤ò»Ï¤á¤Þ¤¹\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¥µ¥¤¥º¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "¹ç·×¥µ¥¤¥º: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "¥Ð¡¼¥¸¥ç¥ó: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "¥µ¥¤¥º: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤¤¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "¾ðÊó"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ëÃæ"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "¤·¤Ð¤é¤¯¤ªÂÔ¤Á²¼¤µ¤¤¡¤"
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "»Ä¤ê»þ´Ö "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "¹ç·×»þ´Ö "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤Î½àÈ÷"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸ %s ¤Î¥¤¥ó¥¹¥È¡¼¥ë"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "¤«¤Þ¤ï¤ºÀè¤Ë¿Ê¤ß¤Þ¤¹¤«¡©"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸¤ÎÀ°Îó¤Ç¥¨¥é¡¼¤¬È¯À¸:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "¤¹¤Ç¤Ë¤¢¤ë X11 ¤ÎÀßÄê¤ò»È¤¤¤Þ¤¹¤«¡©"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"¥·¥¹¥Æ¥à¥ê¥½¡¼¥¹¤¬Â­¤ê¤Þ¤»¤ó¡£ Mandrake Linux ¤ò¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¤Ë¤Ï\n"
-"¤¤¤¯¤Ä¤«ÌäÂ꤬¤¢¤ê¤Þ¤¹¡£\n"
-"¤³¤Î¾É¾õ¤¬µ¯¤­¤¿¤È¤­¡¢¤«¤ï¤ê¤Ë¥Æ¥­¥¹¥È¥¤¥ó¥¹¥È¡¼¥ë¤ò»î¤»¤Þ¤¹¡£\n"
-"¤³¤ì¤ò¤¹¤ë¤Ë¤Ï¡¢CDROM ¤«¤é¥Ö¡¼¥È¤·¤¿¤È¤­¡¢¡ÖF1¡×¤ò²¡¤·¡¢¡Ötext¡×¤ÈÆþÎϤ·¤Æ\n"
-"¤¯¤À¤µ¤¤¡£"
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¥¯¥é¥¹"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "°Ê²¼¤Î¥¤¥ó¥¹¥È¡¼¥ë¥¯¥é¥¹¤ò¤É¤ì¤«Áª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "¤¢¤Ê¤¿¤ÎÁª¤ó¤À¥°¥ë¡¼¥×¤ÎÁí¥µ¥¤¥º¤Ï¡¢¤À¤¤¤¿¤¤ %d MB¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"¥¤¥ó¥¹¥È¡¼¥ëÎ̤ò¸º¤é¤·¤¿¤±¤ì¤Ð¡¢¥Ñ¥Ã¥±¡¼¥¸¤Î¥Ñ¡¼¥»¥ó¥È¿ô¤ò\n"
-"»ØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¤³¤ì¤ò²¼¤²¤ë¤È¡¢¤¤¤Á¤Ð¤ó½ÅÍפʤâ¤Î¤À¤±¤¬¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Þ¤¹¡£\n"
-"100%% ¤ò»ØÄꤹ¤ë¤È¡¢Áª¤ó¤À¥Ñ¥Ã¥±¡¼¥¸¤ò¤¹¤Ù¤Æ¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¡£"
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"¥Ç¥£¥¹¥¯¾å¤Ë¶õ¤­Îΰè¤Ë¤Ï¡¢¤³¤ì¤é¤Î¥Ñ¥Ã¥±¡¼¥¸¤Î %d%% ¤·¤«Æþ¤ê¤Þ¤»¤ó¡£\n"
-"\n"
-"¥¤¥ó¥¹¥È¡¼¥ëÎ̤ò¸º¤é¤·¤¿¤±¤ì¤Ð¡¢¥Ñ¡¼¥»¥ó¥È¿ô¤ò»ØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£\n"
-"¤³¤ì¤ò²¼¤²¤ë¤È¡¢¤¤¤Á¤Ð¤ó½ÅÍפʤâ¤Î¤À¤±¤¬¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Þ¤¹¡£\n"
-"%d%% ¤ò»ØÄꤹ¤ë¤È¡¢ºÇÂç¸Â¤Î¥Ñ¥Ã¥±¡¼¥¸¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¡£"
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "¼¡¤Î¥¹¥Æ¥Ã¥×¤Ç¤Ï¤â¤Ã¤ÈºÙ¤«¤¤ÁªÂò¤¬½ÐÍè¤Þ¤¹"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¥Ñ¥Ã¥±¡¼¥¸Ãæ¤Î³ä¹ç"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸¥°¥ë¡¼¥×¤òÁªÂò"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "¸ÄÊ̥ѥ屡¼¥¸¤ÎÁªÂò"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "¹ç·×¥µ¥¤¥º: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸¤¬²õ¤ì¤Æ¤¤¤Þ¤¹"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "̾Á°: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "½ÅÍ×: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "¤³¤Î¥Ñ¥Ã¥±¡¼¥¸¤ÏÁªÂò¤Ç¤­¤Þ¤»¤ó¡£¥Ç¥£¥¹¥¯¤Î¶õ¤­ÍÆÎ̤¬ÉÔ­¤Ç¤¹¡£"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "°Ê²¼¤Î¥Ñ¥Ã¥±¡¼¥¸¤¬¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Þ¤¹"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "°Ê²¼¤Î¥Ñ¥Ã¥±¡¼¥¸¤¬¼è¤ê½ü¤«¤ì¤Þ¤¹"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "¤³¤Î¥Ñ¥Ã¥±¡¼¥¸¤ÏÁªÂò¡¦ÈóÁªÂò¤Ç¤­¤Þ¤»¤ó"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "¤³¤ì¤ÏÉԲķç¤Ê¥Ñ¥Ã¥±¡¼¥¸¤Ç¤¹¡£ÈóÁªÂò¤Ë¤Ï¤Ç¤­¤Þ¤»¤ó"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "¤³¤Î¥Ñ¥Ã¥±¡¼¥¸¤ÏÈóÁªÂò¤Ë¤Ç¤­¤Þ¤»¤ó¡£¤¹¤Ç¤Ë¥¤¥ó¥¹¥È¡¼¥ëºÑ¤ß¤Ç¤¹"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"¤³¤Î¥Ñ¥Ã¥±¡¼¥¸¤Ï¥¢¥Ã¥×¥°¥ì¡¼¥É¤¬É¬ÍפǤ¹¡£\n"
-"ËÜÅö¤ËÁªÂò²ò½ü¤·¤Æ¤¤¤¤¤ó¤Ç¤¹¤«¡©"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "¤³¤Î¥Ñ¥Ã¥±¡¼¥¸¤ÏÁªÂò²ò½ü¤Ç¤­¤Þ¤»¤ó¡£¥¢¥Ã¥×¥°¥ì¡¼¥É¤¬É¬ÍפǤ¹"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "¼«Æ°ÁªÂò¤µ¤ì¤¿¥Ñ¥Ã¥±¡¼¥¸¤òɽ¼¨"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "¥Õ¥í¥Ã¥Ô¡¼¤Ë¥»¡¼¥Ö/¥í¡¼¥É¤¹¤ë"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸ÁªÂò¤Î¹¹¿·"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "ºÇ¾®¥¤¥ó¥¹¥È¡¼¥ë"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "»î»»¤·¤Æ¤¤¤Þ¤¹"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤Î½àÈ÷Ãæ¡¢¾¯¡¹¤ªÂÔ¤Á¤ò"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d ¥Ñ¥Ã¥±¡¼¥¸"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"·Ù¹ð\n"
-"\n"
-"°Ê²¼¤Î¾ò¹à¤ò¤·¤Ã¤«¤êÆɤó¤Ç¤¯¤À¤µ¤¤¡£¾¯¤·¤Ç¤âƱ°Õ¤Ç¤­¤Ê¤¤Éôʬ¤¬\n"
-"¤¢¤ì¤Ð¼¡¤Î CD ¥á¥Ç¥£¥¢¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ïǧ¤á¤é¤ì¤Þ¤»¤ó¡£¤³¤Î¥á¥Ç¥£¥¢¤ò\n"
-"»È¤ï¤º¥¤¥ó¥¹¥È¡¼¥ë¤ò³¤±¤ë¤Ë¤Ï¡ÖµñÈݡפò²¡¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"\n"
-"¼¡¤Î CD ¥á¥Ç¥£¥¢¤Ë´Þ¤Þ¤ì¤ë¥³¥ó¥Ý¡¼¥Í¥ó¥È¤Î°ìÉô¤Ï¡¢GPL¤äÎà»÷¥é¥¤¥»¥ó¥¹\n"
-"¤¬Å¬ÍѤµ¤ì¤Þ¤»¤ó¡£¤½¤Î¾ì¹ç¡¢¤½¤ì¤¾¤ì¤¬Æȼ«¤Î¥é¥¤¥»¥ó¥¹¾ò¹à¤ä¾ò·ï¤Ç\n"
-"¥«¥Ð¡¼¤µ¤ì¤ë¤³¤È¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-"³ºÅö¤¹¤ë¥³¥ó¥Ý¡¼¥Í¥ó¥È¤ò»ÈÍѤ·¤¿¤êºÆÇÛÉÛ¤·¤¿¤ê¤¹¤ë¾ì¹ç¤Ë¤Ï¡¢¤½¤¦¤·¤¿\n"
-"¸ÄÊ̥饤¥»¥ó¥¹¤òÆɤó¤Ç¤½¤ì¤Ë¤·¤¿¤¬¤¦¤è¤¦¤Ë¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"¤½¤¦¤·¤¿¥é¥¤¥»¥ó¥¹¤Ï¤ª¤ª¤à¤Í¡¢Åö³º¥³¥ó¥Ý¡¼¥Í¥ó¥È¤Î°Üž¡¢Ê£À½¡Ê¥Ð¥Ã¥¯\n"
-"¥¢¥Ã¥×ÌÜŪ¤Î¤â¤Î¤ò½ü¤¯¡Ë¡¢ºÆÇÛÉÛ¡¢¥ê¥Ð¡¼¥¹¥¨¥ó¥¸¥Ë¥¢¥ê¥ó¥°¡¢Ê¬²ò¡¢\n"
-"µÕ¥³¥ó¥Ñ¥¤¥ë¡¢Êѹ¹¤Ê¤É¤ò¶Ø¤¸¤Æ¤¤¤ë¤Î¤¬¤Õ¤Ä¤¦¤Ç¤¹¡£\n"
-"¹ç°Õ¤ËÂФ¹¤ë°ãÈ¿¤Ï¤¿¤À¤Á¤Ë¡¢¤½¤ÎÅö³º¥é¥¤¥»¥ó¥¹²¼¤Ç¤Î¤¢¤Ê¤¿¤Î¸¢Íø¤ò\n"
-"¾Ã¼º¤µ¤»¤Þ¤¹¡£Åö³º¥é¥¤¥»¥ó¥¹¤Î¾ò¹à¤¬¤½¤¦¤·¤¿¸¢Íø¤òǧ¤á¤Æ¤¤¤Ê¤¤¸Â¤ê\n"
-"Ê£¿ô¤Î¥·¥¹¥Æ¥à¤Ë¤½¤Î¥×¥í¥°¥é¥à¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤ê¡¢¥Í¥Ã¥È¥ï¡¼¥¯¾å\n"
-"¤Ç»È¤¦¤è¤¦¤Ë¤·¤¿¤ê¤Ï¤Ç¤­¤Þ¤»¤ó¡£ÉÔÌÀÅÀ¤¬¤¢¤ë¤È¤­¤Ë¤Ï¡¢¤½¤Î¥³¥ó¥Ý¡¼\n"
-"¥Í¥ó¥È¤ÎÇÛÉÛ¼Ô¤«ÊÔ½¸¼Ô¤ËľÀÜÌ䤤¹ç¤ï¤»¤Æ¤¯¤À¤µ¤¤¡£\n"
-"¤½¤¦¤·¤¿¥³¥ó¥Ý¡¼¥Í¥ó¥È¤Î¡¢Âè»°¼Ô¤Ø¤Î°Üž¤äÊ£À½¤Ï¡¢¥É¥­¥å¥á¥ó¥Æ¡¼¥·¥ç¥ó\n"
-"¤â´Þ¤áÄ̾ï¤Ï¶Ø»ß¤µ¤ì¤Æ¤¤¤Þ¤¹¡£\n"
-"\n"
-"\n"
-"¼¡¤ÎCD ¥á¥Ç¥£¥¢¤Î¥³¥ó¥Ý¡¼¥Í¥ó¥È¤Ë´Ø¤¹¤ë¸¢Íø¤Î¤¹¤Ù¤Æ¤Ï¡¢¤½¤ì¤¾¤ì¤Î\n"
-"ºî¼Ô¤Ë°¤·¡¢¥½¥Õ¥È¥¦¥§¥¢¥×¥í¥°¥é¥à¤ËŬÍѤµ¤ì¤ëÃÎŪºâ»º¤ÈÃøºî¸¢Ë¡¤Ë\n"
-"¤è¤Ã¤ÆÊݸ¤ì¤Æ¤¤¤Þ¤¹¡£\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "ǧ¤á¤ë"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "µñÈÝ"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Cd-Rom ¤ò¸ò´¹¤·¤Æ¤¯¤À¤µ¤¤¡ª\n"
-"¡Ö %s ¡×¤È¤¤¤¦ Cd-Rom ¤ò¥É¥é¥¤¥Ö¤Ë¤¤¤ì¤Æ¡¢ Ok ¤ò²¡¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"CD¤¬¤Ê¤±¤ì¤Ð¡¢Cancel ¤ò²¡¤·¤Æ¤³¤Î Cd-Rom ¤«¤é¤Î¥¤¥ó¥¹¥È¡¼¥ë¤ò²óÈò¤·¤Æ²¼¤µ¤¤¡£"
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ç¥¨¥é¡¼¤¬È¯À¸:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "¥¨¥é¡¼È¯À¸"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "¥½¥Õ¥È»ÈÍѥ饤¥»¥ó¥¹¾ò¹à"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"¤Ï¤¸¤á¤Ë\n"
-"\n"
-"ËÜ¥ª¥Ú¥ì¡¼¥Æ¥£¥ó¥°¥·¥¹¥Æ¥à¤ª¤è¤ÓMandrake Linux¥Ç¥£¥¹¥È¥ê¥Ó¥å¡¼¥·¥ç¥ó¤Ç\n"
-"Ä󶡤µ¤ì¤ë³Æ¼ï¤Î¥³¥ó¥Ý¡¼¥Í¥ó¥È¤ò¡¢°Ê²¼¤Ç¤Ï¡Ö¥½¥Õ¥È¥¦¥§¥¢À½ÉʡפȸƤ֡£\n"
-"¥½¥Õ¥È¥¦¥§¥¢À½Éʤϡ¢¥ª¥Ú¥ì¡¼¥Æ¥£¥ó¥°¥·¥¹¥Æ¥à¤ª¤è¤ÓMandrake Linux¥Ç¥£¥¹\n"
-"¥È¥ê¥Ó¥å¡¼¥·¥ç¥ó¤ÇÄ󶡤µ¤ì¤ë³Æ¼ï¤Î¥³¥ó¥Ý¡¼¥Í¥ó¥È¤Ë´ØÏ¢¤¹¤ë¥×¥í¥°¥é¥à·²\n"
-"¤ä¥á¥½¥Ã¥É¡¢¤­¤½¤¯¤ä¥É¥­¥å¥á¥ó¥Æ¡¼¥·¥ç¥ó¤ò´Þ¤à¤¬¡¢¤½¤ì¤Ë¸Â¤é¤ì¤ë¤â¤Î¤Ç\n"
-"¤Ï¤Ê¤¤¡£\n"
-"\n"
-"\n"
-"1. ¥é¥¤¥»¥ó¥¹Æ±°Õ»ö¹à\n"
-"\n"
-"¤³¤Îʸ½ñ¤ò¿µ½Å¤ËÆɤó¤Ç¤¯¤À¤µ¤¤¡£ËÜʸ½ñ¤Ï¤¢¤Ê¤¿¤ÈMandrake S.A.¤È¤Î´Ö¤Ç\n"
-"Äù·ë¤µ¤ì¤ë¡¢¥½¥Õ¥È¥¦¥§¥¢À½ÉʤËŬÍѤµ¤ì¤ë¥é¥¤¥»¥ó¥¹Æ±°Õ»ö¹à¤Ç¤¹¡£\n"
-"¥½¥Õ¥È¥¦¥§¥¢À½Éʤò¤¤¤«¤Ê¤ë·Á¤Ç¤¢¤ì¥¤¥ó¥¹¥È¡¼¥ë¡¢Ê£À½¡¢»ÈÍѤ¹¤ë¤³¤È¤Ç\n"
-"¤¢¤Ê¤¿¤ÏÌÀ¼¨Åª¤Ë¡¢Ëܥ饤¥»¥ó¥¹¤ÎÁ´¾ò·ï¤ä¾ò¹à¤Ë½¾¤¦¤³¤È¤ò¼õ¤±Æþ¤ì\n"
-"´°Á´¤ËƱ°Õ¤·¤¿¤â¤Î¤È¤µ¤ì¤Þ¤¹¡£\n"
-"Ëܥ饤¥»¥ó¥¹¤Î¤¤¤«¤Ê¤ëÉôʬ¤Ç¤¢¤ìƱ°Õ¤Ç¤­¤Ê¤±¤ì¤Ð¡¢¥½¥Õ¥È¥¦¥§¥¢À½ÉʤÎ\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¡¢Ê£À½¡¢»ÈÍѤÏǧ¤á¤é¤ì¤Þ¤»¤ó¡£\n"
-"Ëܥ饤¥»¥ó¥¹¤Î¾ò¹à¤ä¾ò·ï¤ËŬ¹ç¤·¤Ê¤¤·Á¤Ç¥½¥Õ¥È¥¦¥§¥¢À½Éʤò¥¤¥ó¥¹¥È¡¼¥ë\n"
-"Ê£À½¡¢ÍøÍѤ·¤è¤¦¤È¤¹¤ë»î¤ß¤Ï̵¸ú¤Ç¤¢¤ê¡¢Ëܥ饤¥»¥ó¥¹²¼¤Ç¤Î¤¢¤Ê¤¿¤Î¸¢Íø\n"
-"¤òÇíÃ¥¤¹¤ë¤³¤È¤È¤Ê¤ê¤Þ¤¹¡£¥é¥¤¥»¥ó¥¹¤ÎÇË´þ¤Ëȼ¤¤¡¢¤¢¤Ê¤¿¤Ï¥½¥Õ¥È¥¦¥§¥¢\n"
-"À½ÉʤÎÊ£À½¤¹¤Ù¤Æ¤ò¨ºÂ¤ËÇ˲õ¤·¤Ê¤±¤ì¤Ð¤Ê¤ê¤Þ¤»¤ó¡£\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "¥­¡¼¥Ü¡¼¥É"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "¥­¡¼¥Ü¡¼¥É¥ì¥¤¥¢¥¦¥È¤Ï²¿¤Ç¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "»È¤¨¤ë¥­¡¼¥Ü¡¼¥É¥ì¥¤¥¢¥¦¥È¤Î°ìÍ÷¤òɽ¼¨¤·¤Þ¤¹¡£"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "¤É¤Î¥¤¥ó¥¹¥È¡¼¥ë¥¯¥é¥¹¤ò˾¤ß¤Þ¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë/¹¹¿·"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤¹¤«¡¤¹¹¿·¤Ç¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "¿ä¾©"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "¥¨¥­¥¹¥Ñ¡¼¥È"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "¹¹¿·"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "¥Þ¥¦¥¹¤Î·¿¤Ï¤Ê¤ó¤Ç¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "¥Þ¥¦¥¹¥Ý¡¼¥È"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "¥Þ¥¦¥¹¤Ï¤É¤Î¥·¥ê¥¢¥ë¥Ý¡¼¥È¤Ë¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤Þ¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "¥Ü¥¿¥ó¥¨¥ß¥å¥ì¡¼¥·¥ç¥ó"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "¥Ü¥¿¥ó2¤Î¥¨¥ß¥å¥ì¡¼¥·¥ç¥ó"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "¥Ü¥¿¥ó3¤Î¥¨¥ß¥å¥ì¡¼¥·¥ç¥ó"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA¥«¡¼¥É¤ÎÀßÄêÃæ..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "IDE ¤ÎÀßÄê"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "»È¤¨¤ë¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¤¢¤ê¤Þ¤»¤ó"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥¹¥­¥ã¥ó¤·¤Æ¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È¤òõ¤·¤Æ¤¤¤Þ¤¹"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È¤ÎÁªÂò"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤¬Æɤá¤Þ¤»¤ó¡¤²õ¤ì¤Æ¤¤¤ë¤è¤¦¤Ç¤¹:(\n"
-"ÉÔÀµ¤Ê¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¾Ã¤·¤Æ¤ß¤Þ¤·¤ç¤¦¤«¡©¡Ê¤³¤ì¤À¤È¥Ç¡¼¥¿¤¬Á´Éô¾Ã¤¨¤Þ"
-"¤¹¡ª¡Ë\n"
-"¤¢¤ë¤¤¤Ï¡¢DrakX¤Ë¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤òÊѹ¹¤µ¤»¤Ê¤¤¼ê¤¬¤¢¤ê¤Þ¤¹¡£\n"
-"(¥¨¥é¡¼¤Ï%s¤Ç¤¹)\n"
-"\n"
-"Á´¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¾Ãµî¤·¤Æ¤è¤í¤·¤¤¤Ç¤¹¤Í¡©\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ¤Ï¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤òÀµ¤·¤¯Æɤá¤Þ¤»¤ó¤Ç¤·¤¿¡£\n"
-"¤³¤³¤«¤éÀè¤Ï²¿¤¬µ¯¤­¤Æ¤â¤·¤ê¤Þ¤»¤ó¤è¡ª"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"1MB ¥Ö¡¼¥È¥¹¥È¥é¥Ã¥×ÍѤζõ¤­¥¹¥Ú¡¼¥¹¤¬¤¢¤ê¤Þ¤»¤ó¡ª¡¡¥¤¥ó¥¹¥È¡¼¥ë¤Ï³¤±¤Þ¤¹"
-"¤¬¡¢¥·¥¹¥Æ¥à¤Îµ¯Æ°¤Ë¤Ï DiskDrake ¤Ç¥Ö¡¼¥Ä¥¹¥È¥é¥Ã¥×¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òºî¤Ã¤Æ¤¯¤À"
-"¤µ¤¤."
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "¹¹¿·¤Ç¤­¤ë¥ë¡¼¥È¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "¥ë¡¼¥È¥Ñ¡¼¥Æ¥£¥·¥ç¥ó"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "¥·¥¹¥Æ¥à¤Î¥ë¡¼¥È¥Ñ¡¼¥Æ¥£¥·¥ç¥ó(/) ¤Ï¤Ê¤ó¤Ç¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤ÎÊѹ¹¤òÈ¿±Ç¤¹¤ë¤Ë¤Ï¥ê¥Ö¡¼¥È¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "¥Õ¥©¡¼¥Þ¥Ã¥È¤¹¤ë¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "ÉÔÎÉ¥Ö¥í¥Ã¥¯¤ò¸¡ºº¤·¤Þ¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥Õ¥©¡¼¥Þ¥Ã¥È"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "¥Õ¥¡¥¤¥ë %s ¤ÎºîÀ®¤È¥Õ¥©¡¼¥Þ¥Ã¥È"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤Ë½½Ê¬¤Ê¥¹¥ï¥Ã¥×¤¬¤¢¤ê¤Þ¤»¤ó¡¤¥¹¥ï¥Ã¥×¤ò²Ã¤¨¤Æ²¼¤µ¤¤"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "¼ê»ý¤Á¤Î¥Ñ¥Ã¥±¡¼¥¸¤ò¤µ¤¬¤·¤Æ¤¤¤Þ¤¹"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "¥¢¥Ã¥×¥°¥ì¡¼¥É¤¹¤ë¥Ñ¥Ã¥±¡¼¥¸¤ò¤µ¤¬¤·¤Æ¤¤¤Þ¤¹"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"¥¤¥ó¥¹¥È¡¼¥ë¤ä¥¢¥Ã¥×¥°¥ì¡¼¥É¤ËɬÍפʥǥ£¥¹¥¯¤Î¶õ¤­ÍÆÎ̤¬ÉÔ­¤Ç¤¹¡£ (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "´°Á´ (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "ºÇ¾® (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "¿ä¾© (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "¥«¥¹¥¿¥à"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"¥Õ¥í¥Ã¥Ô¡¼¤Ø¤Î¥Ñ¥Ã¥±¡¼¥¸ÁªÂò¤ÎÊݸ¤«Æɤ߹þ¤ß¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"·Á¼°¤Ï auto_install ¤ÇÀ¸À®¤·¤¿¥Õ¥í¥Ã¥Ô¡¼¤ÈƱ¤¸¤Ç¤¹¡£"
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "¥Õ¥í¥Ã¥Ô¡¼¤«¤éÆɤ߹þ¤à"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "¥Õ¥í¥Ã¥Ô¡¼¤«¤éÆɤ߹þ¤ßÃæ"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸¤òÁªÂò"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸ÁªÂò¤ÎÆþ¤Ã¤¿¥Õ¥í¥Ã¥Ô¡¼¤òÁÞÆþ"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "¥Õ¥í¥Ã¥Ô¡¼¤Ë¥»¡¼¥Ö¤¹¤ë"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Áª¤ó¤À¤â¤Î¤Î¥µ¥¤¥º¤Ï¶õ¤­¥¹¥Ú¡¼¥¹¤ò±Û¤¨¤Æ¤¤¤Þ¤¹"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"¾åµ­¤Î°ìÍ÷¤ÎCD¤¬¤¹¤Ù¤Æ¤½¤í¤Ã¤Æ¤¤¤ì¤Ð¡¢Ok¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£\n"
-"CD¤¬°ì¤Ä¤â¤Ê¤±¤ì¤Ð¡¢¥­¥ã¥ó¥»¥ë¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"¼ê¸µ¤Ë¤Ê¤¤CD¤¬¤¢¤ì¤Ð¡¢¤½¤ì¤òÁªÂò¤«¤é¤Ï¤º¤·¤Æ¤«¤éOk¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤¹¡£"
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "¡Ö %s ¡×¤È¤¤¤¦Cd-Rom"
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"¥Ñ¥Ã¥±¡¼¥¸ %s ¤ò¥¤¥ó¥¹¥È¡¼¥ë\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ëÀßÄê¤ò³ÎÄê"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "»È¤Ã¤¿µ¯Æ°¥Õ¥í¥Ã¥Ô¡¼¤ò¥É¥é¥¤¥Ö %s ¤ËÁÞÆþ"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "¹¹¿·¥â¥¸¥å¡¼¥ë¥Õ¥í¥Ã¥Ô¡¼¤ò¥É¥é¥¤¥Ö %s ¤ËÁÞÆþ¤·¤Æ²¼¤µ¤¤"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"¤µ¤¢¡¢°Å¹æ²½ÍѤΥ½¥Õ¥È¤ò¥À¥¦¥ó¥í¡¼¥É¤¹¤ë½àÈ÷¤¬¤Ç¤­¤Þ¤·¤¿¡£\n"
-"\n"
-"·Ù¹ð:\n"
-"\n"
-"¤³¤ì¤é¤Î¥½¥Õ¥È¤ËÂФ¹¤ëÍ×·ï¤ä¡¢³ÆÃϤÎË¡À©Å٤ΤÁ¤¬¤¤¤¬¤¤¤í¤¤¤í¤¢¤ë¤Î¤Ç¡¢\n"
-"¤³¤Î¥½¥Õ¥È¤Î¤ªµÒÍͤ䥨¥ó¥É¥æ¡¼¥¶¤Ï¡¢¼«Ê¬¤Î½ê°¤¹¤ëË¡À©Å٤Τâ¤È¤Ç¡¢¤³¤¦\n"
-"¤·¤¿¥½¥Õ¥È¤Î¥À¥¦¥ó¥í¡¼¥É¤äÊݸ¡¢»ÈÍѤʤɤ¬Ç§¤á¤é¤ì¤Æ¤¤¤ë¤«¤É¤¦¤«¤ò¼«Ê¬\n"
-"¤Ç³Îǧ¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¤µ¤é¤Ë¤ªµÒÍͤ䥨¥ó¥É¥æ¡¼¥¶¤Ï¡¢¼«Ê¬¤Î½ê°¤¹¤ëË¡À©ÅÙ¤ÎË¡µ¬À©¤Ë°ãÈ¿¤·¤Ê¤¤\n"
-"¤è¤¦¤è¤¯Ãí°Õ¤·¤Æ¤¯¤À¤µ¤¤¡£¤ªµÒÍͤ䥨¥ó¥É¥æ¡¼¥¶¤¬³ºÅö¤¹¤ëË¡µ¬À©¤Îµ¬Äê¤ò\n"
-"º½Å¤·¤Ê¤¤¾ì¹ç¤Ë¤Ï¡¢¿¼¹ï¤Ê½èȳÂоݤȤʤë´í¸±¤ò¤ª¤«¤¹¤³¤È¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-"\n"
-"¤³¤ÎƱ°Õ½ñ¤Ë½ð̾¤·¤¿¸å¤Ë¸ÜµÒ¤ä¥¨¥ó¥É¥æ¡¼¥¶¤¬¥¢¥¯¥»¥¹¤¹¤ë¸«¹þ¤ß¤Î¤¢¤ë¡¢\n"
-"¤³¤ì¤é¤Î¥½¥Õ¥È¥¦¥§¥¢¤ò»È¤¤¡¢ÊÝ»ý¤·¡¢¤¢¤ë¤¤¤Ï¥À¥¦¥ó¥í¡¼¥É¤¹¤ë¤³¤È¤Ë¤è¤ë\n"
-"Æü졢´ÖÀÜ¡¢¶öȯ¤Ê¤É°ìÀڤλ³²¡Ê¤³¤ì¤Ë¤ÏÇä¾å»¼º¡¢¶È̳¤ÎÄä»ß¡¢¾¦Íѥǡ¼¥¿¤Î\n"
-"ÁÓ¼º¤ä´ØϢ»¼º¤ÈË¡ÄîȽÃǤ˴ð¤Å¤¯Â»³²Çå½þ¤äÊä½þ¶â»Ùʧ¤¤¤Ê¤É¤¬´Þ¤Þ¤ì¤ë¤¬\n"
-"¤³¤ì¤Ë¸Â¤é¤ì¤ë¤â¤Î¤Ç¤Ï¤Ê¤¤¡Ë¤Ë¤Ä¤¤¤Æ¡¢Mandrakesoft ¤ä¤½¤ÎÀ½Â¤¶È¼Ô¤ä\n"
-"¥µ¥×¥é¥¤¥ä¤Ï¤¤¤«¤Ê¤ë¾ì¹ç¤Ë¤â¤Ê¤ó¤éÀÕǤ¤ò»ý¤¿¤Ê¤¤¡£\n"
-"\n"
-"°Ê¾å¤Î¼è¤ê·è¤á¤Ë¤Ä¤¤¤Æ¤ÎÌ䤤¹ç¤ï¤»¤Ï¡¢°Ê²¼¤ËÏ¢Íí¤Î¤³¤È¡§\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "¤É¤Î¥µ¥¤¥È¤«¤é¥Ñ¥Ã¥±¡¼¥¸¤ò»ý¤Ã¤Æ¤¯¤ë¤«¤òÁªÂò"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "¥µ¥¤¥È¤ËÀܳ¤·¤Æ¥Ñ¥Ã¥±¡¼¥¸°ìÍ÷¤ò¼èÆÀ¤·¤Æ¤¤¤Þ¤¹"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤¤¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "¤¢¤Ê¤¿¤Î»þ´ÖÂӤϤɤì¤Ç¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "¥Ï¡¼¥É¥¦¥§¥¢¥¯¥í¥Ã¥¯¤Ï GMT ¤Ë¥»¥Ã¥È¤·¤Æ¤¢¤ê¤Þ¤¹"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "¼«Æ°»þ´Ö¤¢¤ï¤»¡ÊNTP¤ò»È¤¦¡Ë"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "NTP ¥µ¡¼¥Ð"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "¥ê¥â¡¼¥ÈCUPS ¥µ¡¼¥Ð"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "¥×¥ê¥ó¥¿¤Ê¤·"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "¤Þ¤È¤á"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "¥Þ¥¦¥¹"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "»þ´ÖÂÓ"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "¥×¥ê¥ó¥¿"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDN¥«¡¼¥É"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "¥µ¥¦¥ó¥É¥«¡¼¥É"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "¥Æ¥ì¥Ó¥«¡¼¥É"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "¥í¡¼¥«¥ë¥Õ¥¡¥¤¥ë"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "¥ë¡¼¥È¥Ñ¥¹¥ï¡¼¥É"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "¥Ñ¥¹¥ï¡¼¥É¤Ê¤·"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "¤³¤Î¥Ñ¥¹¥ï¡¼¥É¤Ï´Êñ¤¹¤®¤Þ¤¹¡ÊºÇÄã¤Ç¤â %d ʸ»ú»È¤Ã¤Æ¤¯¤À¤µ¤¤¡Ë"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "ǧ¾Ú"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "ǧ¾ÚLDAP"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP¥Ù¡¼¥¹dn"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "LDAP¥µ¡¼¥Ð"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "ǧ¾ÚNIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS ¥É¥á¥¤¥ó"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS ¥µ¡¼¥Ð"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"¥«¥¹¥¿¥à¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤¬¤¢¤ë¤È¡¢Ä̾ï¤Î¥Ö¡¼¥È¥í¡¼¥À¤ò»È¤ï¤º¤Ë Linux ¤ò\n"
-"µ¯Æ°¤Ç¤­¤Þ¤¹¡£SILO ¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤¯¤Ê¤¤¾ì¹ç¤ä¡¢Â¾¤Î OS ¤¬\n"
-" SILO ¤òºï½ü¤¹¤ë¾ì¹ç¡¢¤Þ¤¿¤Ï¥Ï¡¼¥É¥¦¥§¥¢ÀßÄê¤Î¤¿¤á SILO ¤¬¤¦¤Þ¤¯ºîÆ°\n"
-"¤·¤Ê¤¤¾ì¹ç¤Ë»ÈÍѤǤ­¤Þ¤¹¡£\n"
-"¥«¥¹¥¿¥à¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤Ï¡¢Mandrake ¤Î¥·¥¹¥Æ¥àÉüµìÍѤΥ쥹¥­¥å¡¼¥¤¥á¡¼¥¸\n"
-"¤È¤·¤Æ¤â»ÈÍѤǤ­¤Þ¤¹¡£¤³¤ì¤¬¤¢¤ì¤Ð¥·¥¹¥Æ¥à¤¬´íµ¡¤Ë¤ª¤Á¤¤¤Ã¤¿¤È¤­¤Ë\n"
-"Éüµì¤¹¤ë¤Î¤¬³Ú¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-"¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤òºî¤ë¤Ê¤é¤Ð¡¢¥Õ¥í¥Ã¥Ô¥£¥Ç¥£¥¹¥¯¤ò¥É¥é¥¤¥Ö¤ËÁÞÆþ¤·¡¢\n"
-"¡ÖOK¡×¤ò²¡¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "ºÇ½é¤Î¥Õ¥í¥Ã¥Ô¡¼¥É¥é¥¤¥Ö"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "ÆóÈÖÌܤΥեí¥Ã¥Ô¡¼¥É¥é¥¤¥Ö"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "¥¹¥­¥Ã¥×"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"¥«¥¹¥¿¥à¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤¬¤¢¤ë¤È¡¢Ä̾ï¤Î¥Ö¡¼¥È¥í¡¼¥À¤ò»È¤ï¤º¤Ë Linux ¤ò\n"
-"µ¯Æ°¤Ç¤­¤Þ¤¹¡£LILO (¤Þ¤¿¤ÏGRUB)¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤¯¤Ê¤¤¾ì¹ç¤ä¡¢Â¾¤Î OS ¤¬\n"
-" LILO ¤òºï½ü¤¹¤ë¾ì¹ç¡¢¤Þ¤¿¤Ï¥Ï¡¼¥É¥¦¥§¥¢ÀßÄê¤Î¤¿¤á LILO ¤¬¤¦¤Þ¤¯ºîÆ°\n"
-"¤·¤Ê¤¤¾ì¹ç¤Ë»ÈÍѤǤ­¤Þ¤¹¡£\n"
-"¥«¥¹¥¿¥à¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤Ï¡¢Mandrake ¤Î¥·¥¹¥Æ¥àÉüµìÍѤΥ쥹¥­¥å¡¼¥¤¥á¡¼¥¸\n"
-"¤È¤·¤Æ¤â»ÈÍѤǤ­¤Þ¤¹¡£¤³¤ì¤¬¤¢¤ì¤Ð¥·¥¹¥Æ¥à¤¬´íµ¡¤Ë¤ª¤Á¤¤¤Ã¤¿¤È¤­¤Ë\n"
-"Éüµì¤¹¤ë¤Î¤¬³Ú¤Ë¤Ê¤ê¤Þ¤¹¡£¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤òºî¤ê¤Þ¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Í­¸ú¤Ê¥Õ¥í¥Ã¥Ô¡¼¥É¥é¥¤¥Ö¤¬¤¢¤ê¤Þ¤»¤ó¡¤¤´¤á¤ó¤Ê¤µ¤¤"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤òºî¤ê¤¿¤¤¥Õ¥í¥Ã¥Ô¥£¥É¥é¥¤¥Ö¤òÁªÂò"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "¥Õ¥í¥Ã¥Ô¡¼¤ò¥É¥é¥¤¥Ö %s ¤ËÁÞÆþ"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤ÎºîÀ®"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "¥Ö¡¼¥È¥í¡¼¥À¤Î½àÈ÷"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"¤È¤Æ¤â¸Å¤¤¤«¡¢Ì¤ÃΤΥޥ·¥ó¤ò»È¤Ã¤Æ¤¤¤ë¤è¤¦¤Ç¤¹¤Í¡£\n"
-"yaboot ¥Ö¡¼¥È¥í¡¼¥À¤Ï¤³¤ì¤Ç¤Ï»È¤¨¤Þ¤»¤ó¡£\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¤Ï³¤±¤Þ¤¹¤¬¡¢¥Þ¥·¥ó¤Îµ¯Æ°¤Ë¤Ï\n"
-"BootX ¤ò»È¤Ã¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "aboot ¤ò»È¤¤¤Þ¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"aboot ¥¤¥ó¥¹¥È¡¼¥ë»þ¤Ë¥¨¥é¡¼È¯À¸¡£\n"
-"̵Íý¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤·¤Æ¤ß¤Þ¤¹¤«¡©¡¡¤¿¤À¤·ºÇ½é¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬Ç˲õ¤µ¤ì¤Þ¤¹¡£"
-
-#: ../../install_steps_interactive.pm_.c:1070
-msgid "Installing bootloader"
-msgstr "¥Ö¡¼¥È¥í¡¼¥À¥¤¥ó¥¹¥È¡¼¥ëÃæ"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "¥Ö¡¼¥È¥í¡¼¥À¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ë¼ºÇÔ¤·¤Þ¤·¤¿¡£°Ê²¼¤Î¥¨¥é¡¼¤¬È¯À¸:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"¥ª¡¼¥×¥ó¥Õ¥¡¡¼¥à¥¦¥§¥¢µ¯Æ°¥Ç¥Ð¥¤¥¹¤òÊѹ¹¤·¤Ê¤¤¤È¡¢¥Ö¡¼¥È¥í¡¼¥À¤¬\n"
-"Í­¸ú¤Ë¤Ê¤é¤Ê¤¤¤«¤â¤·¤ì¤Þ¤»¤ó¡£ºÆµ¯Æ°¤·¤Æ¥Ö¡¼¥È¥í¡¼¥À¤Î¥×¥í¥ó¥×¥È\n"
-"¤¬½Ð¤Ê¤«¤Ã¤¿¤é¡¢ºÆµ¯Æ°»þ¤Ë Command-Option-O-F ¤ò²¡¤·¤Æ¤³¤¦ÆþÎϤ·¤Þ¤¹:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" ¤½¤ì¤«¤é¤³¤¦¥¿¥¤¥×¤·¤Þ¤¹: shut-down\n"
-"¼¡¤Îµ¯Æ°»þ¤Ë¤Ï¥Ö¡¼¥È¥í¡¼¥À¤Î¥×¥í¥ó¥×¥È¤¬½Ð¤ë¤Ï¤º¤Ç¤¹¡£"
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Ä㤤"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "¤Û¤É¤Û¤É"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "¹â¤¤"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "¥»¥­¥å¥ê¥Æ¥£¤Î¿å½à¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "¶õ¤Î¥Õ¥í¥Ã¥Ô¡¼¤ò¥É¥é¥¤¥Ö %s ¤ËÁÞÆþ¤·¤Æ²¼¤µ¤¤"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¥Õ¥í¥Ã¥Ô¡¼¤Î¼«Æ°ºîÀ®"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"¤¤¤¯¤Ä¤«¤Î¥¤¥ó¥¹¥È¡¼¥ë¥¹¥Æ¥Ã¥×¤¬ÉÔ´°Á´¤Ç¤¹¡£\n"
-"\n"
-"ËÜÅö¤Ë½ªÎ»¤·¤Þ¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"¤ª¤á¤Ç¤È¤¦¤´¤¶¤¤¤Þ¤¹!¡¡¥¤¥ó¥¹¥È¡¼¥ë´°Î»¤Ç¤¹¡£\n"
-"¥Ö¡¼¥ÈÍÑ¥á¥Ç¥£¥¢¤òÈ´¤¤¤Æ¡¢¥ê¥¿¡¼¥ó¤ò²¡¤·¤ÆºÆµ¯Æ°¤·¤Æ²¼¤µ¤¤¡£\n"
-"\n"
-"¤³¤Î¥Ð¡¼¥¸¥ç¥ó¤Î Mandrake Linux ¤Î¥Ð¥°½¤Àµ¾ðÊó¤Ï¡¢\n"
-"http://www.linux-mandrake/ ¤ÇÄ´¤Ù¤é¤ì¤Þ¤¹¡£\n"
-"\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¸å¤ÎÀßÄê¤Ë¤Ä¤¤¤Æ¤Ï¥æ¡¼¥¶¥¬¥¤¥É¤Î¡Ö¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¸å¡×¤Î\n"
-"¾Ï¤ò»²¾È¤·¤Æ²¼¤µ¤¤¡£"
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¥Õ¥í¥Ã¥Ô¡¼¤Î¼«Æ°ºîÀ®"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"¼«Æ°¥¤¥ó¥¹¥È¡¼¥ë¤Ï¡¢´õ˾¼¡Âè¤ÇÅ°ÄìŪ¤Ë¼«Æ°²½¤Ç¤­¤Þ¤¹¡£\n"
-"¤³¤Î¾ì¹ç¡¢¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Ï´°Á´¤Ë½ñ¤­´¹¤¨¤é¤ì¤Þ¤¹¤è¡ª\n"
-"(¤³¤ì¤ÏÊ̤Υޥ·¥ó¤Ø¤Î¥¤¥ó¥¹¥È¡¼¥ëÍѤΤâ¤Î¤Ç¤¹).\n"
-"\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Á´¼«Æ°"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "ºÆÀ¸"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸ÁªÂò¤ÎÊݸ"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux ¥¤¥ó¥¹¥È¡¼¥ë %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr "  <Tab>/<Alt-Tab> Í×ÁǴ֤ΰÜÆ°  | <Space> ÁªÂò | <F12> ¼¡¤Î²èÌÌ "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu ¤¬¤¢¤ê¤Þ¤»¤ó"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "¥Õ¥¡¥¤¥ë¤òÁªÂò"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "¹âÅÙ¤ÊÁªÂò"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "¤ªÂÔ¤Á²¼¤µ¤¤"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "¥Ä¥ê¡¼¤ò¤Î¤Ð¤¹"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "¥Ä¥ê¡¼¤ò½Ì¤á¤ë"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "¤½¤Î¤Þ¤Þ¤È¥°¥ë¡¼¥×Ê̤òÀÚ¤êÂؤ¨"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "ÉÔÌÀ (%s)¡¤¤â¤Ã¤ÈÀµ³Î¤Ë\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "ÉÔÀµ¤ÊÁªÂò¡¤¤â¤¦°ìÅٻ¤Æ²¼¤µ¤¤\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr "? (¥Ç¥Õ¥©¥ë¥È¤Ï %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "¤É¤ì¤Ë¤·¤Þ¤¹¤«¡©¡Ê¥Ç¥Õ¥©¥ë¥È¤Ï %s¡Ë"
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "¤É¤ì¤Ë¤·¤Þ¤¹¤«¡©¡Ê¥Ç¥Õ¥©¥ë¥È¤Ï %s¡¢Áª¤Ð¤Ê¤¤¤Ê¤é¡Ö¤Ê¤·¡×¡Ë"
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "¥Á¥§¥³ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "¥É¥¤¥Ä"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "¥¹¥Ú¥¤¥ó"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "¥Õ¥£¥ó¥é¥ó¥É"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "¥Õ¥é¥ó¥¹"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "¥Î¥ë¥¦¥§¡¼"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "¥Ý¡¼¥é¥ó¥É"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "¥í¥·¥¢"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "¥¹¥¦¥§¡¼¥Ç¥ó"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "¥¤¥®¥ê¥¹¼°¥­¡¼¥Ü¡¼¥É"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "¥¢¥á¥ê¥«¼°¥­¡¼¥Ü¡¼¥É"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "¥¢¥ë¥Ð¥Ë¥¢"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "¥¢¥ë¥á¥Ë¥¢¡Ê¸Å¤¤¡Ë"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "¥¢¥ë¥á¥Ë¥¢¡Ê¥¿¥¤¥×¥é¥¤¥¿¡¼¡Ë"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "¥¢¥ë¥á¥Ë¥¢¡Êȯ²»µ­¹æ¡Ë"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "¥¢¥¼¥ë¥Ð¥¤¥¸¥ã¥ó(¥é¥Æ¥ó)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "¥Ù¥ë¥®¡¼"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "¥Ö¥ë¥¬¥ê¥¢"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "¥Ö¥é¥¸¥ë"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "¥Ù¥é¥ë¡¼¥·"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "¥¹¥¤¥¹¡Ê¥É¥¤¥Ä¼°ÇÛÎó¡Ë"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "¥¹¥¤¥¹¡Ê¥Õ¥é¥ó¥¹¼°ÇÛÎó¡Ë"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "¥Á¥§¥³ (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "¥É¥¤¥Ä¡Ê¥Ç¥Ã¥É¥­¡¼¤Ê¤·¡Ë"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "¥Ç¥ó¥Þ¡¼¥¯"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (¥Î¥ë¥¦¥§¡¼)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "¥¨¥¹¥È¥Ë¥¢"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "¥°¥ë¥¸¥¢¡Ê¡Ö¥í¥·¥¢¼°¡×ÇÛÎó¡Ë"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "¥°¥ë¥¸¥¢¡Ê¡Ö¥é¥Æ¥ó¡×ÇÛÎó¡Ë"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "¥®¥ê¥·¥ã"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "¥Ï¥ó¥¬¥ê¡¼"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "¥¯¥í¥¢¥Á¥¢"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "¥¤¥¹¥é¥¨¥ë"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "¥¤¥¹¥é¥¨¥ë¡Êȯ²»µ­¹æ¡Ë"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "¥¤¥é¥ó"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "¥¢¥¤¥¹¥é¥ó¥É"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "¥¤¥¿¥ê¥¢"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "ÆüËܸì106¥­¡¼¥Ü¡¼¥É"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Ä«Á¯¼°¥­¡¼¥Ü¡¼¥É"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "¥é¥Æ¥ó¥¢¥á¥ê¥«"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "¥ê¥È¥¢¥Ë¥¢ AZERTY (µì)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "¥ê¥È¥¢¥Ë¥¢ AZERTY (¿·)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "¥ê¥È¥¢¥Ë¥¢ ¡Ö¿ô»úÎó¡× QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "¥ê¥È¥¢¥Ë¥¢ ¡Öȯ²»¡× QWERTY"
-
-#: ../../keyboard.pm_.c:208
-msgid "Latvian"
-msgstr "¥é¥È¥ô¥£¥¢"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "¥Þ¥±¥É¥Ë¥¢"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "¥ª¥é¥ó¥À"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "¥Ý¡¼¥é¥ó¥É¡Êqwerty ÇÛÎó¡Ë"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "¥Ý¡¼¥é¥ó¥É¡ÊqwertzÇÛÎó¡Ë"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "¥Ý¥ë¥È¥¬¥ë"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "¥«¥Ê¥À¡Ê¥±¥Ù¥Ã¥¯¡Ë"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "¥ë¡¼¥Þ¥Ë¥¢¡Êqwertz¡Ë"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "¥ë¡¼¥Þ¥Ë¥¢¡Êqwerty¡Ë"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "¥í¥·¥¢¡ÊYawerty¡Ë"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "¥¹¥í¥Ù¥Ë¥¢"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "¥¹¥í¥Ð¥­¥¢ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "¥¹¥í¥Ð¥­¥¢ (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "¥»¥ë¥Ó¥¢(cyrillic)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "¥¿¥¤¡¡¥­¡¼¥Ü¡¼¥É"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr "¥¿¥¸¥¯¡¡¥­¡¼¥Ü¡¼¥É"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "¥È¥ë¥³¡ÊÅÁÅýŪ¡Ö£Æ¡×¥â¥Ç¥ë¡Ë"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "¥È¥ë¥³¡Ê¸½Âå¡Ö£Ñ¡×¥â¥Ç¥ë¡Ë"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "¥¦¥¯¥é¥¤¥Ê"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "¥¢¥á¥ê¥«¼°¥­¡¼¥Ü¡¼¥É¡Ê¹ñºÝ¼°¡Ë"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "¥Ù¥È¥Ê¥à ¡Ö¿ô»úÎó¡× QWERTY"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "¥æ¡¼¥´¥¹¥é¥Ó¥¢¡Ê¥é¥Æ¥ó¡Ë"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "½ä²ó¥Þ¥¦¥ó¥È %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "¤Þ¤ºÏÀÍý¥Ü¥ê¥å¡¼¥à¤òºï½ü¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - ¥Þ¥¦¥¹"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "ɸ½à"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "ÈÆÍÑ PS/2 ¥Û¥¤¡¼¥ë¥Þ¥¦¥¹"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 ¥Ü¥¿¥ó"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "ÈÆÍÑ"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "¥Û¥¤¡¼¥ë"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "¥Þ¥¤¥¯¥í¥½¥Õ¥È¡¦¥¤¥ó¥Æ¥ê¥Þ¥¦¥¹¡Ê¥·¥ê¥¢¥ë¡Ë"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "ÈÆÍѤÎ2¥Ü¥¿¥ó¥Þ¥¦¥¹"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "ÈÆÍѤÎ3¥Ü¥¿¥ó¥Þ¥¦¥¹"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "¥Þ¥¤¥¯¥í¥½¥Õ¥È¡¦¥¤¥ó¥Æ¥ê¥Þ¥¦¥¹¡ÊPS/2¡Ë"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC ¥·¥ê¡¼¥º (¥·¥ê¥¢¥ë)"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (¥·¥ê¥¢¥ë, ¸Å¤¤ C7 ¥¿¥¤¥×)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "¥Ð¥¹¥Þ¥¦¥¹"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2¥Ü¥¿¥ó"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3¥Ü¥¿¥ó"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "¤Ê¤·"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "¥Þ¥¦¥¹¤Ê¤·"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "¥Þ¥¦¥¹¤ò¥Æ¥¹¥È¤·¤Æ¤ß¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "¥Þ¥¦¥¹¤òÍ­¸ú¤Ë¤¹¤ë¤Ë¤Ï¡¢"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "¥Û¥¤¡¼¥ë¤òÆ°¤«¤·¤Æ¤¯¤À¤µ¤¤¡ª"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "´°Î»"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "¼¡ ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- ¤â¤É¤ë"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Àµ¤·¤¯É½¼¨½ÐÍè¤Þ¤·¤¿¤«¡©"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ØÀܳ"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"adsl ¤ËÀܳ¤¹¤ë¤Õ¤Ä¤¦¤Î¤ä¤êÊý¤Ï¡¢pppoe¤Ç¤¹¡£\n"
-"¤Ç¤â¡¢pptp¤ä¡¢dhcp¤·¤«»È¤ï¤Ê¤¤Àܳ¤â¤¢¤ê¤Þ¤¹¡£\n"
-"¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢¡Öpppoe¤ò»È¤¦¡×¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "dhcp¤ò»È¤¦"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pppoe¤ò»È¤¦"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pptp¤ò»È¤¦"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"¤É¤Îdhcp¥¯¥é¥¤¥¢¥ó¥È¤ò»È¤¤¤Þ¤¹¤«¡©\n"
-"¥Ç¥Õ¥©¥ë¥È¤Ï dhcpcd¤Ç¤¹"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"¥·¥¹¥Æ¥à¾å¤Ë¥¤¡¼¥µ¥Í¥Ã¥È¥¢¥À¥×¥¿¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó¡£¤³¤Î¼ïÎà¤Î\n"
-"Àܳ¤ÏÀßÄê¤Ç¤­¤Þ¤»¤ó¡£"
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥¤¥ó¥¿¡¼¥Õ¥§¥¤¥¹¤ÎÁªÂò"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤Ë»È¤¦¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥À¥×¥¿¤òÁª¤Ó¤Þ¤·¤ç¤¦"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥«¡¼¥É¤¬¸«ÉÕ¤«¤ê¤Þ¤»¤ó"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤ÎÀßÄê"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"¥Û¥¹¥È̾¤¬Ê¬¤«¤ë¤Ê¤é¡¢¤½¤ì¤òÆþÎϤ·¤Æ²¼¤µ¤¤¡£\n"
-"¤¤¤¯¤Ä¤«¤ÎDHCP¥µ¡¼¥Ð¤ÏÆ°ºî¤¹¤ë¤Î¤Ë¥Û¥¹¥È̾¤òɬÍפȤ·¤Þ¤¹¡£\n"
-"¥Û¥¹¥È̾¤Ï¡Èmybox.mylab.myco.com¡É¤Î¤è¤¦¤ËÀ©¸Â¤·¤Æ²¼¤µ¤¤¡£"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "¥Û¥¹¥È̾:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄꥦ¥£¥¶¡¼¥É"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "³°ÉÕ ISDN ¥â¥Ç¥à"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Æâ¢ISDN¥«¡¼¥É"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "¤É¤Î¼ïÎà¤ÎISDNÀܳ¤Ç¤¹¤«¡©"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"¤É¤ÎISDN ÀßÄ꤬¤¤¤¤¤Ç¤¹¤«?\n"
-"\n"
-"* ¸Å¤¤ÀßÄê¤Ï isdn4net ¤ò»È¤¤¤Þ¤¹¡£¶¯ÎϤʥġ¼¥ë¤¬¤¢¤ê¤Þ¤¹¤¬¡¢\n"
-"  ½é¿´¼Ô¤Ë¤ÏÀßÄ꤬¤à¤º¤«¤·¤¤¤·¡¢É¸½à¤Ç¤Ï¤¢¤ê¤Þ¤»¤ó¡£\n"
-"\n"
-"* ¿·¤·¤¤ÀßÄê¤Ï¤ï¤«¤ê¤ä¤¹¤¤¤·É¸½àŪ¤Ç¤¹¤¬¡¢¥Ä¡¼¥ë¤Ï¾¯¤Ê¤¤¤Ç¤¹¡£\n"
-"\n"
-"¤ª´«¤á¤Ï¡¢¸å¼Ô¤Î·Ú¤¤ÀßÄê¤Î¤Û¤¦¤Ç¤¹¡£\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "¿·¤·¤¤ÀßÄê¡Êisdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "¸Å¤¤ÀßÄê (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN¤ÎÀßÄê"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"¥×¥í¥Ð¥¤¥À¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"¤â¤·¥ê¥¹¥È¤Ë¤Ê¤±¤ì¤Ð¡¢Unlisted¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "¥è¡¼¥í¥Ã¥Ñ¤Î¥×¥í¥È¥³¥ë"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "¥è¡¼¥í¥Ã¥Ñ¥×¥í¥È¥³¥ë (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "À¤³¦¤Î¤½¤Î¾ÍÑ¥×¥í¥È¥³¥ë"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"À¤³¦¤Î¤½¤Î¾ÍÑ¥×¥í¥È¥³¥ë \n"
-" D-Channel ¤Ç¤Ê¤¤(¥ê¡¼¥¹¤µ¤ì¤¿²óÀþ)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "¤É¤Î¥×¥í¥È¥³¥ë¤ò»È¤¤¤Þ¤¹¤«¡©"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "¤É¤ó¤Ê¥«¡¼¥É¤ò»È¤Ã¤Æ¤¤¤Þ¤¹¤«¡©"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "ʬ¤«¤é¤Ê¤¤"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"¤â¤·ISA¥«¡¼¥É¤ò»ý¤Ã¤Æ¤¤¤¿¤é¡¢¼¡¤Î²èÌ̤ÎÃͤ¬Å¬ÀڤǤ·¤ç¤¦¡£\n"
-"\n"
-"¤â¤·PCMCIA¥«¡¼¥É¤ò»ý¤Ã¤Æ¤¤¤¿¤é¡¢¥«¡¼¥É¤Îirq¤Èio¤òÃΤëɬÍפ¬¤¢¤ê¤Þ¤¹¡£\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "̾̂"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "³¤±¤ë"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "¤¢¤Ê¤¿¤ÎISDN¥«¡¼¥É¤Ï¤É¤ì¤Ç¤¹¤«¡©"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"ISDN ¥«¡¼¥É¤ò¸¡½Ð¤·¤Þ¤·¤¿¤¬¡¢¥¿¥¤¥×¤¬Ê¬¤«¤ê¤Þ¤»¤ó¡£¼¡¤Î²èÌ̤«¤é PCI ¥«¡¼¥É¤ò"
-"Áª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "ISDN PCI ¥«¡¼¥É¤Ï¸«ÉÕ¤«¤ê¤Þ¤»¤ó¤Ç¤·¤¿¡£¼¡¤Î²èÌ̤«¤éÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "¥â¥Ç¥à¤Ï¤É¤Î¥·¥ê¥¢¥ë¥Ý¡¼¥È¤Ë¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤Þ¤¹¤«¡©"
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "¥À¥¤¥¢¥ë¥¢¥Ã¥×¥ª¥×¥·¥ç¥ó"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Àܳ̾"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "ÅÅÏÃÈÖ¹æ"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "¥í¥°¥¤¥ó ID"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "¥¹¥¯¥ê¥×¥È¤ò»È¤¦Ç§¾Ú"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "¥¿¡¼¥ß¥Ê¥ë¤«¤é¤Îǧ¾Ú"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "¥É¥á¥¤¥ó̾"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "DNS ¥µ¡¼¥Ð¡Ê¥ª¥×¥·¥ç¥ó¡Ë"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "¥»¥«¥ó¥É DNS ¥µ¡¼¥Ð¡Ê¥ª¥×¥·¥ç¥ó¡Ë"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Àܳ¤òÀڤ뤫¡¢¤¢¤ë¤¤¤ÏºÆÀßÄꤷ¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤òºÆÀßÄê¤Ç¤­¤Þ¤¹¡£"
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ¤µ¤ì¤Æ¤¤¤Þ¤¹¡£"
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ØÀܳ¤¹¤ë¤«Àܳ¤òºÆÀßÄꤷ¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "¸½ºß¤Ï¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ¤·¤Æ¤¤¤Þ¤»¤ó¡£"
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤Ø¤ÎÀܳ"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤«¤éÀÚÃÇ"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯Àܳ (LAN/¥¤¥ó¥¿¡¼¥Í¥Ã¥È)¤ÎÀßÄê"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤ÈÀßÄê"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "¤Ç¤Ï %s Àܳ¤òÀßÄꤷ¤Þ¤·¤ç¤¦¡£"
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"¤Ç¤Ï %s Àܳ¤òÀßÄꤷ¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"\n"
-"¡ÖOK¡×¤ò²¡¤·¤Æ»Ï¤á¤Þ¤·¤ç¤¦¡£"
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤ÎÀßÄê"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"¥Í¥Ã¥È¥ï¡¼¥¯¥¤¥ó¥¹¥È¡¼¥ë¤ò¤·¤Æ¤¤¤ë¤Î¤Ç¡¢¥Í¥Ã¥È¥ï¡¼¥¯¤ÏÀßÄêºÑ¤ß¤Ç¤¹¡£\n"
-"¤¤¤Þ¤ÎÀßÄê¤ò¤½¤Î¤Þ¤Þ»È¤¦¤Ë¤Ï OK ¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£¥Í¥Ã¥È¥ï¡¼¥¯/¥¤¥ó¥¿¡¼"
-"¥Í¥Ã¥È¤òºÆÀßÄꤹ¤ë¤Ë¤Ï¥­¥ã¥ó¥»¥ë¤ò²¡¤·¤Þ¤¹¡£\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄꥦ¥£¥¶¡¼¥É¤Ø¤è¤¦¤³¤½\n"
-"\n"
-"¤³¤³¤Ï¥¤¥ó¥¿¡¼¥Í¥Ã¥È/¥Í¥Ã¥È¥ï¡¼¥¯Àܳ¤òÀßÄꤹ¤ë¤È¤³¤í¤Ç¤¹¡£\n"
-"¼«Æ°¸¡½Ð¤ò»È¤¤¤¿¤¯¤Ê¤±¤ì¤Ð¡¢¥Á¥§¥Ã¥¯¤ò¤Ï¤º¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "ÀßÄꤹ¤ë¥×¥í¥Õ¥£¡¼¥ë¤ÎÁªÂò"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "¼«Æ°¸¡½Ð¤ò»È¤¦"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "¥Ç¥Ð¥¤¥¹¤Î¸¡½ÐÃæ¤Ç¤¹¡Ä¡Ä"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "¤Õ¤Ä¤¦¤Î¥â¥Ç¥àÀܳ¤òÀßÄê"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "¥Ý¡¼¥È %s ¤Ç¸¡½Ð¤·¤Þ¤·¤¿"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN Àܳ"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "%s ¤ò¸¡½Ð"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ADSL Àܳ"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹ %s ¤Ç¸¡½Ð"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "¥±¡¼¥Ö¥ëÀܳ"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "¥±¡¼¥Ö¥ëÀܳ¤¬¸¡½Ð¤µ¤ì¤Þ¤·¤¿"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "LAN Àܳ"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "¥¤¡¼¥µ¥Í¥Ã¥È¥«¡¼¥É¤¬¸¡½Ð¤µ¤ì¤Þ¤·¤¿"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "ÀßÄꤷ¤¿¤¤Àܳ¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳÊýË¡¤òÊ£¿ôÀßÄꤷ¤Þ¤·¤¿¤Í¡£\n"
-"¤É¤ì¤ò»È¤¦¤«Áª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "¥Ö¡¼¥È»þ¤ËÀܳ¤ò³«»Ï¤·¤Þ¤¹¤«¡©"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄê"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤òºÆµ¯Æ°¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"¥Í¥Ã¥È¥ï¡¼¥¯¤òºÆµ¯Æ°»þ¤Ë¥¨¥é¡¼È¯À¸: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"¤ª¤á¤Ç¤È¤¦¤´¤¶¤¤¤Þ¤¹¡£¥Í¥Ã¥È¥ï¡¼¥¯¤È¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤¬´°Î»¤Ç¤¹¡£\n"
-"\n"
-"ÀßÄê¤ò¤³¤ì¤«¤é¥·¥¹¥Æ¥à¤ËÈ¿±Ç¤µ¤»¤Þ¤¹¡£\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"¤³¤ì¤¬½ª¤ï¤Ã¤¿¤é¡¢X ¥¦¥£¥ó¥É¥¦´Ä¶­¤òºÆµ¯Æ°¤µ¤»¤Æ¡¢¥Û¥¹¥È̾Êѹ¹¤Ëȼ¤¦\n"
-"ÌäÂê¤ò²óÈò¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"·Ù¹ð¡ª: ¤³¤Î¥Ç¥Ð¥¤¥¹¤Ï¡¢¤¹¤Ç¤Ë¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳÍѤËÀßÄꤵ¤ì¤Æ¤¤¤Þ¤¹¡£\n"
-"¤â¤È¤ÎÀßÄê¤ò»Ä¤·¤¿¤±¤ì¤Ð¡¢¤³¤Î¤Þ¤Þ OK ¤ò²¡¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"°Ê²¼¤Î¥Õ¥£¡¼¥ë¥É¤òÊѹ¹¤¹¤ë¤È¡¢ÀßÄ꤬ÊѤï¤Ã¤Æ¤·¤Þ¤¤¤Þ¤¹¡£"
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"¤³¤Î¥Þ¥·¥ó¤Î IP ¥¢¥É¥ì¥¹¤òÆþÎϤ·¤Æ²¼¤µ¤¤¡£\n"
-"³Æ¡¹¤Î¹àÌܤˤϥɥåȤǶèÀÚ¤é¤ì¤¿½½¿Ê¿ô(Î㡤1.2.3.4)¤¬IP ¥¢¥É¥ì¥¹¤È¤·¤ÆÆþÎϤµ"
-"¤ì¤Þ¤¹¡£"
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥Ç¥Ð¥¤¥¹ %s ¤ÎÀßÄê"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (¥É¥é¥¤¥Ð %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP ¥¢¥É¥ì¥¹:"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "¥Í¥Ã¥È¥Þ¥¹¥¯:"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "IP ¤Î¼«Æ°ÀßÄê"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ¥¢¥É¥ì¥¹¤Ï 1.2.3.4 ¤Î¤è¤¦¤ËÆþÎϤ·¤Æ²¼¤µ¤¤"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"¥Û¥¹¥È̾¤òÆþÎϤ·¤Æ²¼¤µ¤¤¡£\n"
-"¥Û¥¹¥È̾¤Ï¡Èmybox.mylab.myco.com¡É¤Î¤è¤¦¤Ë¤·¤Æ²¼¤µ¤¤¡£\n"
-"¤â¤·¥²¡¼¥È¥¦¥§¥¤¤¬¤¢¤ì¤Ð¡¤¤½¤Î IP ¥¢¥É¥ì¥¹¤âÆþÎϤ·¤Æ²¼¤µ¤¤¡£"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS ¥µ¡¼¥Ð"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "¥²¡¼¥È¥¦¥§¥¤"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "¥²¡¼¥È¥¦¥§¥¤¥Ç¥Ð¥¤¥¹"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "¥×¥í¥­¥·¤ÎÀßÄê"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥«¡¼¥É¤Îid¤òÄÉÀסʥé¥Ã¥×¥È¥Ã¥×¤ÇÊØÍø¡Ë"
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Proxy ¤Ï http://... ¤Ç¤¹"
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Proxy ¤Ï ftp://... ¤Ç¤¹"
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ÎÀßÄê"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "º£¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ¤·¤Þ¤¹¤«¡©"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Àܳ¤ò¥Æ¥¹¥È¤·¤Æ¤¤¤Þ¤¹..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "¥·¥¹¥Æ¥à¤Ï¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ¤·¤Þ¤·¤¿¡£"
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "¥»¥­¥å¥ê¥Æ¥£¾å¤ÎÍýͳ¤Ç¡¢Àܳ¤òÀÚ¤ê¤Þ¤¹¡£"
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"¤³¤Î¥Þ¥·¥ó¤Ï¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤Ø¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤Ê¤¤¤è¤¦¤Ç¤¹¤Í¡£\n"
-"Àܳ¤ÎÀßÄê¤ò¤ä¤ê¤Ê¤ª¤·¤Æ¤ß¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Àܳ¤ÎÀßÄê"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "²¼¤Î¥Õ¥£¡¼¥ë¥É¤òËä¤á¤ë¤«¥Á¥§¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "¥«¡¼¥É IRQ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "¥«¡¼¥É mem (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "¥«¡¼¥É IO"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "¥«¡¼¥É IO_0"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "¥«¡¼¥É IO_1"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "¤¢¤Ê¤¿¤ÎÅÅÏÃÈÖ¹æ"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "¥×¥í¥Ð¥¤¥À¤Î̾Á° (Îã provider.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "¥×¥í¥Ð¥¤¥À¤ÎÅÅÏÃÈÖ¹æ"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "¥×¥í¥Ð¥¤¥À¤Î dns 1 (¥ª¥×¥·¥ç¥ó)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "¥×¥í¥Ð¥¤¥À¤Î dns 2 (¥ª¥×¥·¥ç¥ó)"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "¹ñ¤ÎÁªÂò"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "¥À¥¤¥¢¥ë¥â¡¼¥É"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Àܳ¤Î®ÅÙ: "
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "Àܳ¤Î¥¿¥¤¥à¥¢¥¦¥È¡ÊÉáË"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "¥¢¥«¥¦¥ó¥È¥í¥°¥¤¥ó¡Ê¥æ¡¼¥¶Ì¾¡Ë"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "¥¢¥«¥¦¥ó¥È¥Ñ¥¹¥ï¡¼¥É"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "¤³¤Î¥Þ¥·¥ó¤Ç¤Ï¡¢³ÈÄ¥¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¥µ¥Ý¡¼¥È¤µ¤ì¤Æ¤¤¤Þ¤»¤ó"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤Ë̤»ØÄê¤Î·ê¤¬¤¢¤ê¤Þ¤¹¤¬¡¢»È¤¨¤Þ¤»¤ó¡£\n"
-"¤É¤¦¤·¤Æ¤â»È¤¤¤¿¤±¤ì¤Ð¡¢¥×¥é¥¤¥Þ¥ê¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò°ÜÆ°¤·¤Æ¡¢Ì¤»ØÄê¤Î·ê¤ò\n"
-"³ÈÄ¥¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ÎÎ٤ˤâ¤Ã¤Æ¤­¤Þ¤·¤ç¤¦¡£"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "%s ¥Õ¥¡¥¤¥ë¤«¤é¤ÎÉü¸µ¤¬¼ºÇÔ¤·¤Þ¤·¤¿¡§ %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "¥Ð¥Ã¥¯¥¢¥Ã¥×¥Õ¥¡¥¤¥ë¤¬²õ¤ì¤Æ¤¤¤Þ¤¹"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "¥Õ¥¡¥¤¥ë %s ¤Ø¤Î½ñ¤­¹þ¤ß¥¨¥é¡¼"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"¥É¥é¥¤¥Ö¤¬¤É¤¦¤â¤Þ¤º¤¤¤³¤È¤Ë¤Ê¤Ã¤Æ¤¤¤ë¤è¤¦¤Ç¤¹¡£\n"
-"¥Ç¡¼¥¿¤ÎÀ°¹çÀ­¥Á¥§¥Ã¥¯¤¬Ä̤ê¤Þ¤»¤ó¡£\n"
-"¤Ä¤Þ¤ê¥Ç¥£¥¹¥¯¤Ø½ñ¤­¹þ¤ß¤ò¤·¤Æ¤â¥Ç¡¼¥¿¤¬¤á¤Á¤ã¤¯¤Á¤ã¤Ë¤Ê¤ê¤Þ¤¹¡£"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ɬ¿Ü"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "½ÅÍ×"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "¤¢¤ë¤ÈºÇ¹â"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "¤¢¤ë¤È¤¦¤ì¤·¤¤"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "¤¢¤Ã¤Æ¤â¤¤¤¤"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - ¶¦ÄÌ Unix °õºþ¥·¥¹¥Æ¥à"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation¡Ê¿·À¤Âå¡Ë"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - ¥é¥¤¥ó¥×¥ê¥ó¥¿¥Ç¡¼¥â¥ó"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue¡Ê¥­¥å¡¼¤Ê¤·¤Ç°õºþ¡Ë"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "¥í¡¼¥«¥ë¥×¥ê¥ó¥¿"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "¥ê¥â¡¼¥È¥×¥ê¥ó¥¿"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "¥ê¥â¡¼¥ÈCUPS ¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "¥ê¥â¡¼¥È lpd¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥×¥ê¥ó¥¿¡Ê¥½¥±¥Ã¥È¡Ë"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/¥¦¥£¥ó¥É¥¦¥º 95/98/NT¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "NetWare ¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "¥×¥ê¥ó¥¿¥Ç¥Ð¥¤¥¹¤ÎURI¤òÆþÎÏ"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "¥¸¥ç¥Ö¤ò¥³¥Þ¥ó¥É¤Ø¥Ñ¥¤¥×"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "̤ÃΤΥâ¥Ç¥ë"
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr "À¸¤Î¥×¥ê¥ó¥¿¡Ê¥É¥é¥¤¥Ð¤Ê¤·¡Ë"
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(%s¾å¤Ç)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "¡Ê¤³¤Î¥Þ¥·¥ó¾å¤Ç¡Ë"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "¥×¥ê¥ó¥¿¤ÎÀܳ¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "¥×¥ê¥ó¥¿¤Ï¤É¤¦¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"¥ê¥â¡¼¥È CUPS ¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿¤Ï¡¢¤³¤³¤Ç¤ÏÀßÄêÉÔÍפǤ¹¡£\n"
-"¥×¥ê¥ó¥¿¤Ï¼«Æ°¸¡½Ð¤µ¤ì¤Þ¤¹¡£¤â¤·¿®ÍѤǤ­¤Ê¤¤¤È»×¤Ã¤¿¤é¡¢\n"
-"¡Ö¥ê¥â¡¼¥ÈCUPS ¥µ¡¼¥Ð¡×¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£"
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "¤Ê¤·"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-msgid "Choose a default printer!"
-msgstr "¥Ç¥Õ¥©¥ë¥È¥×¥ê¥ó¥¿¤òÁª¤Ó¤Þ¤·¤ç¤¦¡ª"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-"¥ê¥â¡¼¥È¤Î CUPS ¥µ¡¼¥Ð¤Ê¤é¡¢¤³¤³¤Ç¤Ï¥×¥ê¥ó¥¿ÀßÄê¤ÏÉÔÍפǤ¹¡£\n"
-"CUPS ¥µ¡¼¥Ð¤Ï¥Þ¥·¥ó¤Ë¼«Æ°Åª¤Ë¥×¥ê¥ó¥¿¾ðÊó¤òÅϤ·¤Þ¤¹¡£¤¤¤Þ¡¢\n"
-"¤¢¤Ê¤¿¤Î¥Þ¥·¥ó¤¬ÃΤäƤ¤¤ë¥×¥ê¥ó¥¿¤¬ \"¥Ç¥Õ¥©¥ë¥È¥×¥ê¥ó¥¿\"\n"
-"¤Ë½Ð¤Æ¤¤¤Þ¤¹¡£¥Þ¥·¥ó¤Î¥Ç¥Õ¥©¥ë¥È¥×¥ê¥ó¥¿¤òÁª¤ó¤Ç¡¢\n"
-"\"¥×¥ê¥ó¥¿¤òŬÍÑ/ºÆÆɹþ\" ¥Ü¥¿¥ó¤ò²¡¤·¤Æ¤¯¤À¤µ¤¤¡£°ìÍ÷¤Î¹¹¿·\n"
-"¤Ë¤â¤³¤Î¥Ü¥¿¥ó¤ò²¡¤·¤Þ¤¹¡Ê¥ê¥â¡¼¥È¥×¥ê¥ó¥¿¤¬¸«¤¨¤ë¤Þ¤Ç¡¢CUPS \n"
-"³«»Ï¤«¤éºÇÂç30É䫤«¤ê¤Þ¤¹¡£\n"
-"CUPS ¥µ¡¼¥Ð¤¬Ê̤Υͥåȥ¥¯¤Ë¤¢¤ë¤Ê¤é¡¢CUPS¥µ¡¼¥Ð¤ÎIP¥¢¥É¥ì¥¹\n"
-"¤È¡¢¾ì¹ç¤Ë¤è¤Ã¤Æ¤Ï¥Ý¡¼¥ÈÈÖ¹æ¤ò»ØÄꤷ¤Ê¤¤¤È¥µ¡¼¥Ð¤«¤é¥×¥ê¥ó¥¿¾ð\n"
-"Ê󤬤â¤é¤¨¤Þ¤»¤ó¡£¤½¤¦¤Ç¤Ê¤±¤ì¤Ð¡¢¤³¤³¤Ï¶õÍó¤Ë¤·¤Þ¤¹¡£"
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Ä̾ï¤Ï¡¢CUPS ¤Ï¼«Æ°Åª¤Ë¥Í¥Ã¥È¥ï¡¼¥¯´Ä¶­¤Ë¤¢¤ï¤»¤ÆÀßÄꤵ¤ì¤Æ¡¢\n"
-"¥í¡¼¥«¥ë¥Í¥Ã¥È¥ï¡¼¥¯¤Î CUPS ¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿¤Ë¥¢¥¯¥»¥¹¤Ç¤­¤ë\n"
-"¤è¤¦¤Ë¤Ê¤ê¤Þ¤¹¡£¤Ç¤âÀµ¤·¤¯µ¡Ç½¤·¤Ê¤¤¤Ê¤é¡¢¡Ö¼«Æ°CUPSÀßÄê¡×¤ò\n"
-"¥ª¥Õ¤Ë¤·¤Æ¡¢/etc/cups/cupsd.conf ¤ò¼ê¤Ç½ñ¤­´¹¤¨¤Æ¤ä¤ê¤Þ¤¹¡£\n"
-"½ª¤ï¤Ã¤¿¤é¡¢CUPS ¤òºÆµ¯Æ°¤¹¤ë¤Î¤ò¤ªËº¤ì¤Ê¤¯¡ª\n"
-"¡Ê¥³¥Þ¥ó¥É: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "ÊĤ¸¤ë"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "¥×¥ê¥ó¥¿¤òŬÍÑ/ºÆÆɹþ"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ¥¢¥É¥ì¥¹¤Ï 192.168.1.20 ¤Î¤è¤¦¤ËÆþÎϤ·¤Æ²¼¤µ¤¤"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "¥Ý¡¼¥ÈÈÖ¹æ¤ÏÀµ¿ô¤Ç¤¹¡ª"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "¥Ç¥Õ¥©¥ë¥È¥×¥ê¥ó¥¿"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "CUPS ¥µ¡¼¥Ð¤ÎIP"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "¥Ý¡¼¥È"
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr "¼«Æ° CUPS ÀßÄê"
-
-#: ../../printerdrake.pm_.c:217
-msgid "Detecting devices ..."
-msgstr "¥Ç¥Ð¥¤¥¹¤Î¸¡½ÐÃæ¤Ç¤¹¡Ä¡Ä"
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "¥Ý¡¼¥È¤Î¥Æ¥¹¥È"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "¡Ö%s¡×¥×¥ê¥ó¥¿¤¬¡¢¼¡¤Î¤È¤³¤í¤Ç¸«¤Ä¤«¤ê¤Þ¤·¤¿"
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¥Ç¥Ð¥¤¥¹"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"¥×¥ê¥ó¥¿¤¬¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤ë¥Ç¥Ð¥¤¥¹¤Ï²¿¤Ç¤¹¤«\n"
-"(Ãí°Õ /dev/lp0 ¤Ï LPT1: ¤Ë¤Ê¤ê¤Þ¤¹)¡©\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "¥×¥ê¥ó¥¿¥Ç¥Ð¥¤¥¹"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "¥Ç¥Ð¥¤¥¹/¥Õ¥¡¥¤¥ë̾¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-msgid "Reading printer database ..."
-msgstr "¥×¥ê¥ó¥¿¥Ç¡¼¥¿¥Ù¡¼¥¹¤òÆɤó¤Ç¤¤¤Þ¤¹..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "¥ê¥â¡¼¥Èlpd¥×¥ê¥ó¥¿¥ª¥×¥·¥ç¥ó"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"¥ê¥â¡¼¥È¤Î lpd ¤Î ¥×¥ê¥ó¥È¥­¥å¡¼¤ò»È¤¦¤Ë¤Ï¡¤¥×¥ê¥ó¥¿¥µ¡¼¥Ð¤Î\n"
-"¥Û¥¹¥È̾¤È¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿Ì¾¤¬É¬Íפˤʤê¤Þ¤¹¡£."
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "¥ê¥â¡¼¥È¥Û¥¹¥È̾"
-
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "¥ê¥â¡¼¥È¥×¥ê¥ó¥¿Ì¾"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "¥ê¥â¡¼¥È¥Û¥¹¥È̾¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "¥ê¥â¡¼¥È¥Û¥¹¥È̾¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (¥¦¥£¥ó¥É¥¦¥º 9x/NT) ¥×¥ê¥ó¥¿¤Î¥ª¥×¥·¥ç¥ó"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"SMB ¥×¥ê¥ó¥¿¤ò»È¤¦¤Ë¤Ï¡¤SMB ¥Û¥¹¥È̾(Ãí¡ªTCP/IP ¥Û¥¹¥È̾¤È¤ÏÊÌ¡ª)¤È¡¤\n"
-"¿ʬ¥×¥ê¥ó¥È¥µ¡¼¥Ð¤Î IP ¥¢¥É¥ì¥¹¡¤¥¢¥¯¥»¥¹¤·¤¿¤¤¥×¥ê¥ó¥¿¤Î¶¦Í­Ì¾¡¤\n"
-"ŬÀڤʥ桼¥¶Ì¾¡¤¥Ñ¥¹¥ï¡¼¥É¤ª¤è¤Ó¥ï¡¼¥¯¥°¥ë¡¼¥×¤Î¾ðÊó¤¬É¬Íפˤʤê¤Þ¤¹¡£"
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "SMB¥µ¡¼¥Ð¥Û¥¹¥È"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "SMB¥µ¡¼¥Ð¤ÎIP"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "¥·¥§¥¢Ì¾"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "¥ï¡¼¥¯¥°¥ë¡¼¥×"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "¥µ¡¼¥Ð̾¤«¡¢¥µ¡¼¥Ð¤ÎIP¤Ï¤É¤¦¤·¤Æ¤âÍפê¤Þ¤¹¡ª"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "Samba¥·¥§¥¢Ì¾¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "Netware ¥×¥ê¥ó¥¿¤Î¥ª¥×¥·¥ç¥ó"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Netware ¥×¥ê¥ó¥¿¤ò»È¤¦¤Ë¤Ï¡¤NetWare ¥Û¥¹¥È̾(Ãí¡ªTCP/IP ¥Û¥¹¥È̾¤È¤Ï°ã¤¦¡ª)"
-"¤È¡¤\n"
-"¥¢¥¯¥»¥¹¤·¤¿¤¤¥×¥ê¥ó¥¿¤Î¥×¥ê¥ó¥È¥­¥å¡¼Ì¾¡¤Å¬Àڤʥ桼¥¶Ì¾¤ª¤è¤Ó\n"
-"¥Ñ¥¹¥ï¡¼¥É¤¬É¬Íפˤʤê¤Þ¤¹¡£"
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "¥×¥ê¥ó¥¿¥µ¡¼¥Ð"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "°õºþ¥­¥å¡¼¤Î̾Á°"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "NCP ¥µ¡¼¥Ð̾¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr " NCP ¥­¥å¡¼Ì¾¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "¥½¥±¥Ã¥È¥×¥ê¥ó¥¿¤Î¥ª¥×¥·¥ç¥ó"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"¥½¥±¥Ã¥È¥×¥ê¥ó¥¿¤Ç°õºþ¤¹¤ë¤Ê¤é¡¢¥×¥ê¥ó¥¿¤Î¥Û¥¹¥È̾¤È¡¢¾ì¹ç¤Ë\n"
-"¤è¤Ã¤Æ¤Ï¥Ý¡¼¥ÈÈֹ椬ɬÍפˤʤê¤Þ¤¹¡£HP JetDirect ¥µ¡¼¥Ð¤Ç¤Ï¡¢¥Ý¡¼¥ÈÈÖ¹æ¤ÏÄ̾ï"
-"9100¤Ç¤¹¤¬¡¢¤Û¤«¤Î\n"
-"¥µ¡¼¥Ð¤À¤È¤Þ¤Á¤Þ¤Á¤Ç¤¹¡£¥Ï¡¼¥É¥¦¥§¥¢¤Î¥Þ¥Ë¥å¥¢¥ë¤ò¸«¤Þ¤·¤ç¤¦¡£"
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "¥×¥ê¥ó¥¿¥Û¥¹¥È̾"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "¥×¥ê¥ó¥¿¥Û¥¹¥È̾¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "¥×¥ê¥ó¥¿¥Ç¥Ð¥¤¥¹¤ÎURI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"¥×¥ê¥ó¥¿¤ò¥¢¥¯¥»¥¹¤¹¤ë¤Î¤ËľÀÜ URI ¤ò»ØÄꤹ¤ë¤³¤È¤â¤Ç¤­¤Þ¤¹¡£¤³¤ÎURI¤ÏCUPS»Å"
-"Íͤ«Foomatic»ÅÍͤǻØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£¤Ê¤ª¡¢¤¹¤Ù¤Æ¤ÎURI¥¿¥¤¥×¤¬Á´¥¹¥×¡¼¥é¤Ç¥µ"
-"¥Ý¡¼¥È¤µ¤ì¤Æ¤¤¤ë¤ï¤±¤¸¤ã¤Ê¤¤¤Ç¤¹¡£"
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "Í­¸ú¤ÊURI¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤¡ª"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"¥×¥ê¥ó¥¿¤Ï¤½¤ì¤¾¤ì¤Ê¤Þ¤¨¤¬É¬ÍפǤ¹¡Ê¤¿¤È¤¨¤Ð lp¡Ë\n"
-"ÀâÌÀ¤ä¾ì½ê¤ÎÍó¤Ï¶õÍó¤Ç¤â¤«¤Þ¤¤¤Þ¤»¤ó¡£¤³¤ì¤Ï\n"
-"¥æ¡¼¥¶¤Ë¤ï¤«¤ê¤ä¤¹¤¯¤¹¤ë¤¿¤á¤Î¤â¤Î¤Ç¤¹¡£"
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "¥×¥ê¥ó¥¿¤Î̾Á°"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "¥×¥ê¥ó¥¿¤ÎÀâÌÀ"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "¥×¥ê¥ó¥¿¤Î¾ì½ê"
-
-#: ../../printerdrake.pm_.c:701
-msgid "Preparing printer database ..."
-msgstr "¥×¥ê¥ó¥¿¥Ç¡¼¥¿¥Ù¡¼¥¹¤ò½àÈ÷Ãæ..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "¥×¥ê¥ó¥¿¤Îµ¡¼ï¤òÁª¤Ö"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "¤É¤Îµ¡¼ï¤Î¥×¥ê¥ó¥¿¤ò»È¤Ã¤Æ¤¤¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:866
-msgid "OKI winprinter configuration"
-msgstr "OKI win¥×¥ê¥ó¥¿¤ÎÀßÄê"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-"OKI ¤Î¥ì¡¼¥¶win¥×¥ê¥ó¥¿¤òÀßÄꤷ¤è¤¦¤È¤·¤Æ¤¤¤Þ¤¹¤Í¡£¤³¤Î\n"
-"¥×¥ê¥ó¥¿¤ÏÈó¾ï¤ËÆüì¤Ê¥×¥í¥È¥³¥ë¤ò»È¤¦¤Î¤Ç¡¢ºÇ½é¤Î¥Ñ¥é¥ì¥ë\n"
-"¥Ý¡¼¥È¤Ë¤Ä¤Ê¤¬¤Ê¤¤¤Èµ¡Ç½¤·¤Þ¤»¤ó¡£¤â¤·Ê̤Υݡ¼¥È¤ËÀܳ¤µ¤ì\n"
-"¤Æ¤¤¤¿¤ê¡¢¥×¥ê¥ó¥¿¥µ¡¼¥Ð¤Ë¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤¿¤ê¤¹¤ë¾ì¹ç¤Ë¤Ï¡¢¥Æ\n"
-"¥¹¥È¥Ú¡¼¥¸°õºþ¤ÎÁ°¤Ë¡¢ºÇ½é¤Î¥Ñ¥é¥ì¥ë¥Ý¡¼¥È¤Ë¤Ä¤Ê¤®¤Ê¤ª¤·¤Æ\n"
-"¤¯¤À¤µ¤¤¡£¤µ¤â¤Ê¤¤¤È»È¤¨¤Þ¤»¤ó¡£Àܳ¼ïÎà¤ÎÀßÄê¤Ï̵»ë¤µ¤ì¤Þ\n"
-"¤¹¡£"
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark¥¤¥ó¥¯¥¸¥§¥Ã¥È¤ÎÀßÄê"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-"Lexmark¤¬Ä󶡤¹¤ë¥¤¥ó¥¯¥¸¥§¥Ã¥È¥×¥ê¥ó¥¿¥É¥é¥¤¥Ð¤Ï¡¢¥í¡¼¥«¥ë\n"
-"¥×¥ê¥ó¥¿¤·¤«¥µ¥Ý¡¼¥È¤·¤Þ¤»¤ó¡£¥ê¥â¡¼¥È¥Þ¥·¥ó¤ä¥×¥ê¥ó¥¿¥µ¡¼¥Ð\n"
-"¾å¤Î¥×¥ê¥ó¥¿¤Ï»È¤¨¤Þ¤»¤ó¡£¥×¥ê¥ó¥¿¤ò¥í¡¼¥«¥ë¥Ý¡¼¥È¤Ë¤Ä¤Ê¤°¤«\n"
-"Àܳ¤µ¤ì¤Æ¤¤¤ë¥Þ¥·¥ó¤ÇÀßÄꤷ¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-"Lexmark ¥¤¥ó¥¯¥¸¥§¥Ã¥È¤È¤³¤ÎÀßÄê¤Ç°õºþ¤¹¤ë¤Ë¤Ï¡¢Lexmark\n"
-"(http://www.lexmark.com/) ¤ÎÄ󶡤¹¤ë¥¤¥ó¥¯¥¸¥§¥Ã¥È¥×¥ê¥ó¥¿\n"
-"¥É¥é¥¤¥Ð¤¬É¬ÍפǤ¹¡£¥¢¥á¥ê¥«¥µ¥¤¥È¤Ë¹Ô¤Ã¤Æ¡¢¡Ö¥É¥é¥¤¥Ð¡×¤ò\n"
-"¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£¤½¤ì¤«¤é¼«Ê¬¤Îµ¡¼ï¤òÁª¤ó¤Ç¡¢OS¤ÎÍó¤Ç\n"
-"\"Linux\" ¤òÁª¤Ó¤Þ¤¹¡£¥É¥é¥¤¥Ð¤Ï RPM ¥Ñ¥Ã¥±¡¼¥¸¤«¡¢¥°¥é\n"
-"¥Õ¥£¥Ã¥¯¥¤¥ó¥¹¥È¡¼¥ëÍѤΥ·¥§¥ë¥¹¥¯¥ê¥×¥È¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£\n"
-"¤³¤ÎÀßÄê¤Ï¥°¥é¥Õ¥£¥Ã¥¯¥Õ¥í¥ó¥È¥¨¥ó¥É¤ò»È¤ï¤Ê¤¯¤Æ¤â¤Ç¤­¤Þ¤¹¡£\n"
-"¥é¥¤¥»¥ó¥¹Æ±°Õ¤Î¤¢¤È¤Ç¤¹¤°¤Ë¥­¥ã¥ó¥»¥ë¤·¤Æ¤¯¤À¤µ¤¤¡£¤½¤ì¤«¤é\n"
-"°õºþ¥Ø¥Ã¥É¤Î¥¢¥é¥¤¥ó¥á¥ó¥È¥Ú¡¼¥¸¤ò\"lexmarkmaintain\" ¤Ç°õºþ\n"
-"¤·¤Æ¡¢¤³¤Î¥×¥í¥°¥é¥à¤Ç¥Ø¥Ã¥É¤Î¥¢¥é¥¤¥ó¥á¥ó¥È¤òÄ´À°¤·¤Þ¤¹¡£"
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"¥×¥ê¥ó¥¿¤Î¥Ç¥Õ¥©¥ë¥ÈÀßÄê\n"
-"¥Ú¡¼¥¸¤ÎÂ礭¤µ¤È¥¤¥ó¥¯¤Î¼ïÎà¡Ê³ºÅö¤¹¤ë¾ì¹ç¤Î¤ß¡Ë¤¬\n"
-"Àµ¤·¤¯ÀßÄꤵ¤ì¤Æ¤¤¤ë¤«¤ò³Îǧ¤·¤Þ¤·¤ç¤¦¡£¤Ê¤ª¡¢Ä¶¹â\n"
-"ÉʼÁ°õºþ¤Ï¤¹¤´¤¯»þ´Ö¤¬¤«¤«¤ë¤³¤È¤¬¤¢¤ê¤Þ¤¹¡£"
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "¥ª¥×¥·¥ç¥ó %s ¤ÏÀ°¿ô¤Ç¤¹¡ª"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "¥ª¥×¥·¥ç¥ó %s ¤Ï¿ô»ú¤Ç¤¹¡ª"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "¥ª¥×¥·¥ç¥ó %s Èϰϳ°¤Ç¤¹!"
-
-#: ../../printerdrake.pm_.c:1136
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"¤³¤Î¥×¥ê¥ó¥¿ (\"%s\") ¤ò\n"
-"¥Ç¥Õ¥©¥ë¥È¥×¥ê¥ó¥¿¤Ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "¥Æ¥¹¥È¥Ú¡¼¥¸"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"°õºþ¤·¤¿¤¤¥Æ¥¹¥È¥Ú¡¼¥¸¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"Ãí¡§¼Ì¿¿¥Æ¥¹¥È¥Ú¡¼¥¸¤Ï¡¢°õºþ¤Ë¤«¤Ê¤ê»þ´Ö¤¬¤«¤«¤ë¤³¤È¤¬¤¢¤ê¤Þ¤¹¤·¡¢\n"
-"¥á¥â¥ê¤Î¾¯¤Ê¤¤¥ì¡¼¥¶¥×¥ê¥ó¥¿¤Ç¤Ï½ÐÎϤǤ­¤Ê¤¤¤³¤È¤â¤¢¤ê¤Þ¤¹¡£\n"
-"¿¤¯¤Î¾ì¹ç¤Ïɸ½à¥Ú¡¼¥¸¤¬°õºþ¤Ç¤­¤ì¤ÐÂç¾æÉפǤ¹¡£"
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "¥Æ¥¹¥È¥Ú¡¼¥¸¤Ê¤·"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "°õºþ"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "ɸ½à¥Æ¥¹¥È¥Ú¡¼¥¸"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr "Ê̤Υƥ¹¥È¥Ú¡¼¥¸ (¥ì¥¿¡¼)"
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr "Ê̤Υƥ¹¥È¥Ú¡¼¥¸ (A4)"
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "¼Ì¿¿¥Æ¥¹¥È¥Ú¡¼¥¸"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "¥Æ¥¹¥È¥Ú¡¼¥¸°õºþÃæ¡Ä¡Ä"
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"¥Æ¥¹¥È¥Ú¡¼¥¸¤ò¥×¥ê¥ó¥¿¥Ç¡¼¥â¥ó¤ËÁ÷¤ê¤Þ¤·¤¿¡£\n"
-"¥×¥ê¥ó¥¿¤¬Æ°¤­½Ð¤¹¤Þ¤Ç¡¢¤Á¤ç¤Ã¤È»þ´Ö¤¬¤«¤«¤ê¤Þ¤¹¡£\n"
-"°õºþ¤Î¥¹¥Æ¡¼¥¿¥¹¡§\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"¥Æ¥¹¥È¥Ú¡¼¥¸¤ò¥×¥ê¥ó¥¿¥Ç¡¼¥â¥ó¤ËÁ÷¤ê¤Þ¤·¤¿¡£\n"
-"¥×¥ê¥ó¥¿¤¬Æ°¤­½Ð¤¹¤Þ¤Ç¡¢¤Á¤ç¤Ã¤È»þ´Ö¤¬¤«¤«¤ê¤Þ¤¹¡£\n"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "¤¦¤Þ¤¯Æ°¤­¤Þ¤·¤¿¤«¡©"
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-msgid "Raw printer"
-msgstr "À¸¤Î¥×¥ê¥ó¥¿"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"¥³¥Þ¥ó¥É¥é¥¤¥ó¡Ê¥¿¡¼¥ß¥Ê¥ë¥¦¥£¥ó¥É¥¦¡Ë¤«¤é¥Õ¥¡¥¤¥ë¤ò°õºþ¤¹¤ë¤Ë¤Ï¡¢\n"
-"¥³¥Þ¥ó¥É¡Ö%s <file>¡×¤«¡¢¥°¥é¥Õ¥£¥Ã¥¯°õºþ¥Ä¡¼¥ë: ¡Öxpp <file>¡×¤«\n"
-"¡Öqtcups <file>¡×¤ò»È¤¤¤Þ¤¹¡£¥°¥é¥Õ¥£¥Ã¥¯¥Ä¡¼¥ë¤Ï¡¢\n"
-"¥×¥ê¥ó¥¿ÁªÂò¤È¥ª¥×¥·¥ç¥óÀßÄê¤ò´Êñ¤Ë¤·¤Æ¤¯¤ì¤Þ¤¹¡£\n"
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"¤³¤¦¤·¤¿¥³¥Þ¥ó¥É¤Ï¡¢Â¿¤¯¤Î¥¢¥×¥ê¥±¡¼¥·¥ç¥ó¤Î°õºþ¥À¥¤¥¢¥í¥°¤ÎÃæ¤Î\n"
-"¡Ö°õºþ¥³¥Þ¥ó¥É¡×¥Õ¥£¡¼¥ë¥É¤Ç¤â»È¤¨¤Þ¤¹¤¬¡¢¤½¤Î¾ì¹ç¤Ï¥Õ¥¡¥¤¥ë̾¤ÏÍפê¤Þ¤»"
-"¤ó¡£\n"
-"°õºþ¤¹¤ë¥Õ¥¡¥¤¥ë¤Ï¥¢¥×¥ê¥±¡¼¥·¥ç¥ó¤«¤é¤¯¤ë¤«¤é¤Ç¤¹¡£\n"
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"¡Ö%s¡×¥³¥Þ¥ó¥É¤Ï¤Þ¤¿¡¢°õºþ¥¸¥ç¥Ö¤´¤È¤Ë¥ª¥×¥·¥ç¥óÀßÄê¤òÊѤ¨¤µ¤»¤Æ¤¯¤ì¤Þ¤¹¡£\n"
-"¥³¥Þ¥ó¥É¥é¥¤¥ó¤Ë´õ˾¤ÎÀßÄê¤òÄɲ乤ë¤À¤±¤Ç¤¹¡£\n"
-"¤¿¤È¤¨¤Ð¡Ö%s <file>¡×¤È¤¤¤¦¶ñ¹ç¤Ç¤¹¡£ "
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-"¤¤¤Þ¤Î¥×¥ê¥ó¥¿¤Ç»È¤¨¤ë¥ª¥×¥·¥ç¥ó°ìÍ÷¤ò¸«¤ë¤Ë¤Ï¡¢²¼¤Î°ìÍ÷¤òÆɤफ¡¢\n"
-"¤¢¤ë¤¤¤Ï¡Ö¥ª¥×¥·¥ç¥ó°ìÍ÷¤ò°õºþ¡×¥Ü¥¿¥ó¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"¥³¥Þ¥ó¥É¥é¥¤¥ó¡Ê¥¿¡¼¥ß¥Ê¥ë¥¦¥£¥ó¥É¥¦¡Ë¤«¤é¥Õ¥¡¥¤¥ë¤ò°õºþ¤¹¤ë¤Ë¤Ï¡¢\n"
-"¥³¥Þ¥ó¥É¡Ö%s <file>¡×¤ò»È¤¤¤Þ¤¹¡£\n"
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"¤³¤¦¤·¤¿¥³¥Þ¥ó¥É¤Ï¡¢Â¿¤¯¤Î¥¢¥×¥ê¥±¡¼¥·¥ç¥ó¤Î°õºþ¥À¥¤¥¢¥í¥°¤ÎÃæ¤Î\n"
-"¡Ö°õºþ¥³¥Þ¥ó¥É¡×¥Õ¥£¡¼¥ë¥É¤Ç¤â»È¤¨¤Þ¤¹¤¬¡¢¤½¤Î¾ì¹ç¤Ï¥Õ¥¡¥¤¥ë̾¤ÏÍפê¤Þ¤»"
-"¤ó¡£\n"
-"°õºþ¤¹¤ë¥Õ¥¡¥¤¥ë¤Ï¥¢¥×¥ê¥±¡¼¥·¥ç¥ó¤«¤é¤¯¤ë¤«¤é¤Ç¤¹¡£\n"
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-"¤¤¤Þ¤Î¥×¥ê¥ó¥¿¤Ç»È¤¨¤ë¥ª¥×¥·¥ç¥ó°ìÍ÷¤ò¸«¤ë¤Ë¤Ï¡¢²¼¤Î°ìÍ÷¤òÆɤफ¡¢\n"
-"¤¢¤ë¤¤¤Ï¡Ö¥ª¥×¥·¥ç¥ó°ìÍ÷¤ò°õºþ¡×¥Ü¥¿¥ó¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£\n"
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"¥³¥Þ¥ó¥É¥é¥¤¥ó¡Ê¥¿¡¼¥ß¥Ê¥ë¥¦¥£¥ó¥É¥¦¡Ë¤«¤é¥Õ¥¡¥¤¥ë¤ò°õºþ¤¹¤ë¤Ë¤Ï¡¢\n"
-"¥³¥Þ¥ó¥É¡Ö%s <file>¡×¤Þ¤¿¤Ï¡Ö%s <file>¡×¤ò»È¤¤¤Þ¤¹¡£\n"
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"¤Þ¤¿¥ª¥×¥·¥ç¥óÀßÄê¤ä°õºþ¥¸¥ç¥Ö¤Î½èÍý¤Ë¤Ï¥°¥é¥Õ¥£¥Ã¥¯¤Î¡Öxpdq¡×¤â»È¤¨¤Þ¤¹¡£\n"
-"¥Ç¥¹¥¯¥È¥Ã¥×´Ä¶­¤¬ KDE ¤Ê¤é¡¢¡Ö¥Ñ¥Ë¥Ã¥¯¥Ü¥¿¥ó¡×¤È¤¤¤¦¥¢¥¤¥³¥ó¤¬¥Ç¥¹¥¯¥È¥Ã¥×"
-"¤Ë\n"
-"¤¢¤ë¤Ç¤·¤ç¤¦¡£¤³¤ì¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤È¡¢°õºþ¥¸¥ç¥Ö¤¬Á´Éô¤¹¤°¤Ë»ß¤Þ¤ê¤Þ¤¹¡£\n"
-"¤³¤ì¤Ï¤¿¤È¤¨¤Ð»æµÍ¤Þ¤ê¤Î¤È¤­¤ËÊØÍø¤Ç¤¹¡£\n"
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"¡Ö%s¡×¤È¡Ö%s¡×¥³¥Þ¥ó¥É¤Ï¤Þ¤¿¡¢°õºþ¥¸¥ç¥Ö¤´¤È¤Ë¥ª¥×¥·¥ç¥óÀßÄê¤ò\n"
-"ÊѤ¨¤µ¤»¤Æ¤¯¤ì¤Þ¤¹¡£¥³¥Þ¥ó¥É¥é¥¤¥ó¤Ë´õ˾¤ÎÀßÄê¤òÄɲ乤ë¤À¤±¤Ç¤¹¡£\n"
-"¤¿¤È¤¨¤Ð¡Ö%s <file>¡×¤È¤¤¤¦¶ñ¹ç¤Ç¤¹¡£\n"
-
-#: ../../printerdrake.pm_.c:1292
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "°Ê²¼¤Î¥×¥ê¥ó¥¿¤Ç°õºþÃ桧 \"%s\""
-
-#: ../../printerdrake.pm_.c:1294
-msgid "Print option list"
-msgstr "¥×¥ê¥ó¥¿¥ª¥×¥·¥ç¥ó°ìÍ÷"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "¥×¥ê¥ó¥¿¤Î¾ðÊó¤òÆɤó¤Ç¤¤¤Þ¤¹..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "¥×¥ê¥ó¥¿¤ÎÀßÄê¤ò°ÜÆ°"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-"¥¹¥×¡¼¥é %s ¤«¤é¤¤¤Þ¤Î¥¹¥×¡¼¥é %s ¤Ø¡¢¥×¥ê¥ó¥¿¤ÎÀßÄê¤ò°ÜÆ°¤Ç¤­¤Þ¤¹¡£\n"
-"ÀßÄê¥Ç¡¼¥¿¤¹¤Ù¤Æ¡Ê¥×¥ê¥ó¥¿Ì¾¡¢ÀâÌÀ¡¢¾ì½ê¡¢Àܳ¼ïÎà¡¢¥Ç¥Õ¥©¥ë¥È¤Î\n"
-"¥ª¥×¥·¥ç¥óÀßÄê¡Ë¤Ï¤½¤Á¤é¤Ë¼è¤é¤ì¤Þ¤¹¤¬¡¢¥¸¥ç¥Ö¤Ï°ÜÆ°¤·¤Þ¤»¤ó¡£\n"
-"°Ê²¼¤ÎÍýͳ¤Ç¡¢°ÜÆ°¤Ç¤­¤Ê¤¤¥­¥å¡¼¤â¤¢¤ê¤Þ¤¹¡§\n"
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-"CUPS ¤Ï Novell ¥µ¡¼¥Ð¤Î¥×¥ê¥ó¥¿¤ä¡¢¼«Í³·Á¼°¤Î¥³¥Þ¥ó¥É¤Ë¥Ç¡¼¥¿\n"
-"¤òÁ÷¤ë¥×¥ê¥ó¥¿¤Ï¥µ¥Ý¡¼¥È¤·¤Þ¤»¤ó¡£\n"
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-"PDQ ¤Ï¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¤È¥ê¥â¡¼¥È¤Î LPD ¥×¥ê¥ó¥¿¡¢¥½¥±¥Ã¥È/TCP \n"
-"¥×¥ê¥ó¥¿¤·¤«¥µ¥Ý¡¼¥È¤·¤Þ¤»¤ó¡£\n"
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ¤È LPRng ¤ÏIPP ¥×¥ê¥ó¥¿¤ò¥µ¥Ý¡¼¥È¤·¤Þ¤»¤ó¡£\n"
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-"¤µ¤é¤Ë¤³¤Î¥×¥í¥°¥é¥à¤ä\"foomatic-configure\" ¤Çºî¤Ã¤Æ¤¤¤Ê¤¤\n"
-"¥­¥å¡¼¤Ï°ÜÆ°¤Ç¤­¤Þ¤»¤ó¡£"
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-"\n"
-"¤Þ¤¿¥á¡¼¥«¡¼Ä󶡤ΠPPD ¥Õ¥¡¥¤¥ë¤ä¥Í¥¤¥Æ¥£¥Ö¤Î CUPS ¥É¥é¥¤¥Ð\n"
-"¤ÇÀßÄꤵ¤ì¤¿¥×¥ê¥ó¥¿¤Ï°ÜÆ°¤Ç¤­¤Þ¤»¤ó¡£"
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"°ÜÆ°¤·¤¿¤¤¥×¥ê¥ó¥¿¤òÁª¤ó¤Ç \"T°ÜÆ°\"¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "¥×¥ê¥ó¥¿¤ò°ÜÆ°¤·¤Ê¤¤"
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "°ÜÆ°"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"\"%s\" ¤È¤¤¤¦¥×¥ê¥ó¥¿¤Ï¤¹¤Ç¤Ë %s ¤Î²¼¤Ë¸ºß¤·¤Þ¤¹¡£\n"
-"¾å½ñ¤­¤¹¤ë¤Ë¤Ï \"°ÜÆ°\" ¤ò²¡¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"¿·¤·¤¤Ì¾Á°¤ò¥¿¥¤¥×¤¹¤ë¤«¡¢¤³¤Î¥×¥ê¥ó¥¿¤ò¤È¤Ð¤¹¤³¤È¤â¤Ç¤­¤Þ¤¹¡£"
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "¥×¥ê¥ó¥¿Ì¾¤Ï¡¢Ê¸»ú¤È¿ô»ú¤È¥¢¥ó¥À¡¼¥¹¥³¥¢ (_)¤·¤«»È¤¨¤Þ¤»¤ó"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"¥×¥ê¥ó¥¿ \"%s\" ¤Ï¤¹¤Ç¤Ë¸ºß¤·¤Þ¤¹¡£\n"
-"¤¤¤Þ¤ÎÀßÄê¤ò¾å½ñ¤­¤·¤Æ¤·¤Þ¤¤¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "¿·¤·¤¤¥×¥ê¥ó¥¿¤Î̾Á°"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "%s °ÜÆ°Ãæ¡Ä¡Ä"
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-"Á°¤Î¥Ç¥Õ¥©¥ë¥È¥×¥ê¥ó¥¿ (\"%s\")¤ò°ÜÆ°¤·¤Þ¤·¤¿¡£\n"
-"¥³¥ì¤Ï¿·¤·¤¤°õºþ¥·¥¹¥Æ¥à%s¤Ç¤â¥Ç¥Õ¥©¥ë¥È¤Î¥×¥ê¥ó¥¿¤Ë\n"
-"¤·¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:1423
-msgid "Refreshing printer data ..."
-msgstr "¥×¥ê¥ó¥¿¥Ç¡¼¥¿¹¹¿·Ãæ..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr "¥ê¥â¡¼¥È¥×¥ê¥ó¥¿¤ÎÀßÄê"
-
-#: ../../printerdrake.pm_.c:1432
-msgid "Starting network ..."
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯µ¯Æ°Ãæ..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-msgid "Configure the network now"
-msgstr "º£¤¹¤°¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄê¤ò¤¹¤ë"
-
-#: ../../printerdrake.pm_.c:1455
-msgid "Network functionality not configured"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯µ¡Ç½¤¬ÀßÄꤵ¤ì¤Æ¤Þ¤»¤ó"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-"¥ê¥â¡¼¥È¥×¥ê¥ó¥¿¤ÎÀßÄê¤ò¤·¤Þ¤¹¡£¤³¤ì¤Ï¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥¯¥»¥¹¤Î²ÔƯ\n"
-"¤¬É¬¿Ü¤Ç¤¹¤¬¡¢¤¢¤Ê¤¿¤Î¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄê¤Ï¤¹¤ó¤Ç¤¤¤Þ¤»¤ó¡£¥Í¥Ã¥È\n"
-"¥ï¡¼¥¯ÀßÄê¤Ê¤·¤Ç¿Ê¤à¤È¡¢¤¤¤ÞÀßÄêÃæ¤Î¥×¥ê¥ó¥¿¤Ï»È¤¨¤Þ¤»¤ó¡£¤µ¤Æ\n"
-"¤É¤¦¿Ê¤á¤Þ¤·¤ç¤¦¤«¡©"
-
-#: ../../printerdrake.pm_.c:1463
-msgid "Go on without configuring the network"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤ÎÀßÄê¤ò¤È¤Ð¤·¤ÆÀè¤Ë¿Ê¤à"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-"¥¤¥ó¥¹¥È¡¼¥ëÃæ¤Ë¤ä¤Ã¤¿¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄ꤬µ¯Æ°¤Ç¤­¤Þ¤»¤ó¡£\n"
-"µ¯Æ°»þ¤Ë¥Í¥Ã¥È¥ï¡¼¥¯¤¬Í­¸ú¤Ë¤Ê¤Ã¤Æ¤¤¤ë¤«Ä´¤Ù¤Æ¡¢É¬Íפʤé\n"
-"Mandrake¥³¥ó¥È¥í¡¼¥ë¥»¥ó¥¿¤Î¡Ö¥Í¥Ã¥È¥ï¡¼¥¯&¥¤¥ó¥¿¡¼¥Í¥Ã¥È/\n"
-"Àܳ¡×¤ÎÉôʬ¤ÇÀßÄê¤ò¤Ê¤ª¤·¤Æ¤¯¤À¤µ¤¤¡£¤½¤ì¤¬½»¤ó¤Ç¤«¤é¡¢\n"
-"Ʊ¤¸¤¯Mandrake¥³¥ó¥È¥í¡¼¥ë¥»¥ó¥¿¤Î¡Ö¥Ï¡¼¥É¥¦¥§¥¢/¥×¥ê¥ó¥¿¡×\n"
-"¤ÎÉôʬ¤Ç¥×¥ê¥ó¥¿¤ÎÀßÄê¤ò¤·¤Þ¤·¤ç¤¦¡£"
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-"¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥¯¥»¥¹¤¬Íî¤Á¤Æ¤¤¤Æ¡¢µ¯Æ°¤Ç¤­¤Þ¤»¤ó¤Ç¤·¤¿¡£\n"
-"¥Ï¡¼¥É¥¦¥§¥¢¤ÎÀßÄê¤ò¥Á¥§¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£¤½¤ì¤«¤é¥ê¥â¡¼¥È\n"
-"¥×¥ê¥ó¥¿¤ÎÀßÄê¤ò¤ä¤ê¤Ê¤ª¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../printerdrake.pm_.c:1516
-msgid "Restarting printing system ..."
-msgstr "¥×¥ê¥ó¥¿¥·¥¹¥Æ¥àºÆµ¯Æ°Ãæ..."
-
-#: ../../printerdrake.pm_.c:1548
-msgid "high"
-msgstr "¹â¤¤"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "paranoid"
-msgstr "¿À·Ð¼Á¤Ê¤Û¤É¹â¿å½à"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "°õºþ¥·¥¹¥Æ¥à¤ò¥»¥­¥å¥ê¥Æ¥£¿å½à %s ¤Ç¥¤¥ó¥¹¥È¡¼¥ëÃæ"
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-"¤³¤ì¤«¤é¡¢°õºþ¥·¥¹¥Æ¥à %s ¤ò¥»¥­¥å¥ê¥Æ¥£¿å½à %s ¤Î¥Þ¥·¥ó¤Ë\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¡£\n"
-"\n"
-"¤³¤Î°õºþ¥·¥¹¥Æ¥à¤Ï¡¢¥Ç¡¼¥â¥ó¡Ê¥Ð¥Ã¥¯¥°¥é¥¦¥ó¥É¤Î¥×¥í¥»¥¹¡Ë\n"
-"¤ò¼Â¹Ô¤·¤Þ¤¹¡£¤³¤ì¤Ï°õºþ¥¸¥ç¥Ö¤òÂԤäơ¢¤½¤ì¤¬¤­¤¿¤é½èÍý¤·\n"
-"¤Þ¤¹¡£¤³¤Î¥Ç¡¼¥â¥ó¤Ï¥Í¥Ã¥È¥ï¡¼¥¯·Ðͳ¤Ç¡¢¥ê¥â¡¼¥È¥Þ¥·¥ó¤«¤é\n"
-"¤â¥¢¥¯¥»¥¹¤Ç¤­¤ë¤Î¤Ç¡¢¹¶·â¤µ¤ì¤ë²ÄǽÀ­¤¬¤¢¤ê¤Þ¤¹¡£¤Ç¤¹¤«¤é\n"
-"¤³¤Î¥»¥­¥å¥ê¥Æ¥£¿å½à¤Ç¤Ï¡¢¥Ç¥Õ¥©¥ë¥È¤Çµ¯Æ°¤¹¤ë¥Ç¡¼¥â¥ó¤Ï¤´\n"
-"¤¯¾¯¿ô¤Ç¤¹¡£\n"
-"\n"
-"¤³¤Î¥Þ¥·¥ó¤Ç°õºþ¤ÎÀßÄê¤òËÜÅö¤Ë¤ä¤Ã¤Æ¤¤¤¤¤Ç¤¹¤Í¡©"
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Starting the printing system at boot time"
-msgstr "µ¯Æ°»þ¤Ë°õºþ¥·¥¹¥Æ¥à¤ò¥¹¥¿¡¼¥È"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-"°õºþ¥·¥¹¥Æ¥à (%s) ¤Ï¡¢¥Þ¥·¥óµ¯Æ°»þ¤Ë¼«Æ°¥¹¥¿¡¼¥È¤·¤Þ¤»¤ó¡£\n"
-"\n"
-"¥»¥­¥å¥ê¥Æ¥£¿å½à¤ò¾å¤²¤¿¤¿¤á¤Ë¡¢¼«Æ°¥¹¥¿¡¼¥È¤¬Ìµ¸ú¤Ë¤Ê¤Ã¤¿\n"
-"¤Î¤«¤â¤·¤ì¤Þ¤»¤ó¡£°õºþ¥·¥¹¥Æ¥à¤Ï¡¢¹¶·â¤µ¤ì¤ë²ÄǽÀ­¤¬¤¢¤ë¤«¤é\n"
-"¤Ç¤¹¡£\n"
-"\n"
-"°õºþ¥·¥¹¥Æ¥à¤Î¼«Æ°¥¹¥¿¡¼¥È¤ò¤â¤¦°ìÅÙÍ­¸ú¤Ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "¥¤¥ó¥¹¥È¡¼¥ëºÑ¤ß¥½¥Õ¥È¤ò¥Á¥§¥Ã¥¯Ãæ¡Ä¡Ä"
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "LPRng ºï½üÃæ¡Ä¡Ä"
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "LPD ºï½üÃæ¡Ä¡Ä"
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "¥×¥ê¥ó¥¿¤Î¥¹¥×¡¼¥é¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "¤É¤Î°õºþ¥·¥¹¥Æ¥à¡Ê¥¹¥×¡¼¥é¡Ë¤ò»È¤¤¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:1759
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "¥×¥ê¥ó¥¿ \"%s\" ¤ÎÀßÄêÃæ..."
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "¥×¥ê¥ó¥¿¥ª¥×¥·¥ç¥ó"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr "PrinterDrake½àÈ÷Ãæ..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "°õºþ¤ÎÀßÄê¤ò¤·¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr "°õºþ¥·¥¹¥Æ¥à:"
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-"°Ê²¼¤Î¥×¥ê¥ó¥¿¤¬ÀßÄꤵ¤ì¤Æ¤¤¤Þ¤¹¡£\n"
-"Êѹ¹¤ä¾ðÊó¤ò»²¾È¤¹¤ë¤Ë¤Ï¡¢¤½¤Î¥×¥ê¥ó¥¿¤ò\n"
-"¥¯¥ê¥Ã¥¯¤·¤Þ¤¹¡£¤Þ¤¿¡¢¿·¤·¤¤¥×¥ê¥ó¥¿¤Î\n"
-"Äɲäˤϡ֥ץê¥ó¥¿Äɲáפò¥¯¥ê¥Ã¥¯¤·¤Þ¤¹¡£"
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "¥Î¡¼¥Þ¥ë¥â¡¼¥É"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (¥Ç¥Õ¥©¥ë¥È)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "¥ê¥â¡¼¥ÈCUPS ¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-msgid "Printer(s) on remote server(s)"
-msgstr "¥ê¥â¡¼¥È¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "¥×¥ê¥ó¥¿ÄɲÃ"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-msgid "Do you want to configure another printer?"
-msgstr "Ê̤Υץê¥ó¥¿¤òÀßÄꤷ¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "¥×¥ê¥ó¥¿ÀßÄê¤ÎÊѹ¹"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Printer %s: %s %s\n"
-"¤³¤Î¥×¥ê¥ó¥¿¤Î²¿¤òÊѹ¹¤·¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "¤ä¤ì¡ª"
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "¥×¥ê¥ó¥¿Àܳ¤Î¼ïÎà"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "¥×¥ê¥ó¥¿¤Î̾Á°¡¢ÀâÌÀ¡¢¾ì½ê"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "¥×¥ê¥ó¥¿¤Î¥á¡¼¥«¡¼¡¢µ¡¼ï¡¢¥É¥é¥¤¥Ð"
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "¥×¥ê¥ó¥¿¤Î¥á¡¼¥«¡¼¡¢µ¡¼ï"
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr "¤³¤Î¥×¥ê¥ó¥¿¤ò¥Ç¥Õ¥©¥ë¥È¤Ë¤¹¤ë"
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "¥Æ¥¹¥È¥Ú¡¼¥¸°õºþ"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr "¤³¤Î¥×¥ê¥ó¥¿¤Ç¤Î°õºþÊýË¡¤òÄ´¤Ù¤ë"
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "¥×¥ê¥ó¥¿ºï½ü"
-
-#: ../../printerdrake.pm_.c:2071
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "¸Å¤¤¥×¥ê¥ó¥¿ \"%s\" ¤òºï½üÃæ..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "¥×¥ê¥ó¥¿ %s ¤¬¥Ç¥Õ¥©¥ë¥È¥×¥ê¥ó¥¿¤Ë¤Ê¤ê¤Þ¤·¤¿¡£"
-
-#: ../../printerdrake.pm_.c:2103
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "¥×¥ê¥ó¥¿ %s ¤òËÜÅö¤Ëºï½ü¤·¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:2105
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "¥×¥ê¥ó¥¿ \"%s\" ¤òºï½üÃæ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "¥×¥í¥­¥·¤ÎÀßÄê"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"¥×¥í¥¯¥·ÀßÄê¥æ¡¼¥Æ¥£¥ê¥Æ¥£¤Ø¤¤¤é¤Ã¤·¤ã¤¤¤Þ¤»¡Á¡£\n"
-"\n"
-"¤³¤³¤Ç¤Ï http ¤È ftp ¤Î¥×¥í¥¯¥·¤òÀßÄꤷ¤Þ¤¹¡£\n"
-"¥í¥°¥¤¥ó¤ä¥Ñ¥¹¥ï¡¼¥É¤â¡¢É¬ÍפʤéÀßÄê¤Ç¤­¤Þ¤¹¡£\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"http ¥×¥í¥¯¥·¾ðÊó¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤\n"
-"http proxy¤ò»È¤ï¤Ê¤¤¤Ê¤é¶õÍó¤Ë¤·¤Æ¤ª¤¤¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "¥Ý¡¼¥È"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url ¤Ï http://... ¤Ç¤Ï¤¸¤Þ¤ê¤Þ¤¹"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "¥Ý¡¼¥ÈÈÖ¹æ¤Ï¿ô»ú¤Ç¤¹¡£"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"ftp ¥×¥í¥¯¥·¾ðÊó¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤\n"
-"ftp proxy¤ò»È¤ï¤Ê¤¤¤Ê¤é¶õÍó¤Ë¤·¤Æ¤ª¤¤¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url ¤Ï ftp://... ¤Ç¤Ï¤¸¤Þ¤ê¤Þ¤¹"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"¥×¥í¥¯¥·¤Î¥í¥°¥¤¥ó̾¤È¥Ñ¥¹¥ï¡¼¥É¤¬¤¢¤ì¤ÐÆþÎϤ·¤Þ¤¹¡£\n"
-"¥í¥°¥¤¥ó/¥Ñ¥¹¥ï¡¼¥É¤¬¤Ê¤±¤ì¤Ð¶õÍó¤Î¤Þ¤Þ¤Ç¤¹"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "¥í¥°¥¤¥ó"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "¥Ñ¥¹¥ï¡¼¥É"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "¥Ñ¥¹¥ï¡¼¥É¤ò¤â¤¦°ìÅÙÆþ¤ì¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "¥Ñ¥¹¥ï¡¼¥É¤¬°ìÃפ·¤Þ¤»¤ó¡£¤â¤¦°ìÅÙÆþ¤ì¤Æ¤¯¤À¤µ¤¤¡ª"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "¥Õ¥©¡¼¥Þ¥Ã¥ÈºÑ¤ß¤Î RAID md%d ¤Ë¤Ï¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÄɲäǤ­¤Þ¤»¤ó"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "%s ¥Õ¥¡¥¤¥ë¤¬½ñ¤­¹þ¤á¤Þ¤»¤ó"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ¤Ë¼ºÇÔ"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ¤Ë¼ºÇÔ (raidtools ¤¬Æþ¤Ã¤Æ¤Ê¤¤¤Î¤«¤â?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "RAID ¥ì¥Ù¥ë %d ¤Î¤¿¤á¤Ë¤Ï¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬ÉÔ­¤Ç¤¹\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ALSA (Àè¿ÊLinux ¥µ¥¦¥ó¥É¥¢¡¼¥­¥Æ¥¯¥Á¥ã) ¥µ¥¦¥ó¥É¥·¥¹¥Æ¥àµ¯Æ°"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron ¤ÏÄê´üŪ¤Ê¥³¥Þ¥ó¥É¥¹¥±¥¸¥å¡¼¥é¤Ç¤¹¡£"
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd ¤Ï¥Ð¥Ã¥Æ¥ê¡¼¤Î¾õÂÖ¤òÄ´¤Ù¤Æ¤½¤ì¤òsyslog·Ðͳ¤Çµ­Ï¿¤·¤Þ¤¹¡£\n"
-"ÅÅÃÓ¤¬¤Ê¤¯¤Ê¤Ã¤¿¤È¤­¤Ë¥Þ¥·¥ó¤ò¥·¥ã¥Ã¥È¥À¥¦¥ó¤¹¤ë¤Î¤Ë¤â»È¤¨¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"at¥³¥Þ¥ó¥É¤Ç¥¹¥±¥¸¥å¡¼¥ë¤µ¤ì¤¿¥³¥Þ¥ó¥É¤ò¡¢at¼Â¹Ô»þ¤Ë»ØÄꤷ¤¿»þ´Ö¤Ë\n"
-"¼Â¹Ô¤·¤Æ¡¢Ê¿¶ÑÉé²Ù¤¬Ä㤤¤È¤­¤Ë¥Ð¥Ã¥Á¥³¥Þ¥ó¥É¤ò¼Â¹Ô¤·¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron¤ÏUNIXɸ½à¤Î¥×¥í¥°¥é¥à¤Ç¡¢¥æ¡¼¥¶»ØÄê¤Î¥×¥í¥°¥é¥à¤òÄê´üŪ¤Ë\n"
-"¼Â¹Ô¤·¤Þ¤¹¡£vixie cron¤Ïɸ½à¤ÎUNIX cron¤Ë¹âÅ٤ʥ»¥­¥å¥ê¥Æ¥£¤ä\n"
-"¶¯ÎϤÊÀßÄꥪ¥×¥·¥ç¥ó¤Ê¤É¤Îµ¡Ç½¤òÄɲ䷤Ƥ¤¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ¤ÏMidnight Commander¤Ê¤É¥Æ¥­¥¹¥È¥Ù¡¼¥¹¤ÎLinux¥½¥Õ¥È¤Ç¥Þ¥¦¥¹¤¬\n"
-"»È¤¨¤ë¤è¤¦¤Ë¤·¤Þ¤¹¡£¥Þ¥¦¥¹¤Ë¤è¤ë¥³¥ó¥½¡¼¥ë¤Ç¤Î¥«¥Ã¥È¡¦¥Ú¡¼¥¹¥È\n"
-"¤ä¡¢¥Ý¥Ã¥×¥¢¥Ã¥×¥á¥Ë¥å¡¼¤â»È¤¨¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake ¤Ï¥Ï¡¼¥É¥¦¥§¥¢¤òõ¤·¤Æ¡¢²Äǽ¤Ê¤é¿·¤·¤¤¥Ï¡¼¥É¥¦¥§¥¢¤äÊѹ¹¤·¤¿\n"
-"¥Ï¡¼¥É¥¦¥§¥¢¤ÎÀßÄê¤ò¤·¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr "Apache¤ÏWorld Wide Web¥µ¡¼¥Ð¤Ç¡¢HTML ¥Õ¥¡¥¤¥ë¤äCGI¤Î¸ø³«¤Ë»È¤¤¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"¥¤¥ó¥¿¡¼¥Í¥Ã¥È¡¦¥¹¡¼¥Ñ¡¼¥µ¡¼¥Ð¡¦¥Ç¡¼¥â¥ó (Ä̾Îinetd) ¤Ï¡¢É¬ÍפË\n"
-"±þ¤¸¤Æ¤½¤Î¾³Æ¼ï¥¤¥ó¥¿¡¼¥Í¥Ã¥È¥µ¡¼¥Ó¥¹¤ò³«»Ï¤·¤Þ¤¹¡£telnet¡¢ftp¡¢\n"
-"rsh¡¢rlogin¤Ê¤É¤Î¥µ¡¼¥Ó¥¹³«»Ï¤òôÅö¤·¤Þ¤¹¡£inetd¤ò̵¸ú¤Ë¤¹¤ë¤È¡¢\n"
-"¤³¤¦¤·¤¿³Æ¼ï¥µ¡¼¥Ó¥¹¤¹¤Ù¤Æ¤¬Ìµ¸ú¤Ë¤Ê¤ê¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"¥Í¥Ã¥È¥ï¡¼¥¯¹¶·â¤«¤é¥Þ¥·¥ó¤ò¼é¤ë¤¿¤á¤Î¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë¤ò\n"
-"ÀßÄꤹ¤ë¤Ë¤Ï¡¢Linux ¥«¡¼¥Í¥ë2.2 ¤Î¥Ñ¥±¥Ã¥È¥Õ¥£¥ë¥¿¤òµ¯Æ°¤·¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"¤³¤Î¥Ñ¥Ã¥±¡¼¥¸¤Ï¡¢/etc/sysconfig/keyboard¤«¤éÀßÄꤷ¤¿¥­¡¼¥Ü¡¼¥É¥Þ¥Ã¥×¤ò\n"
-"¥í¡¼¥É¤·¤Þ¤¹¡£¤³¤ì¤Ïkbdconfig¥æ¡¼¥Æ¥£¥ê¥Æ¥£¤ò»È¤Ã¤ÆÀßÄꤷ¤Þ¤¹¡£Ä̾ï¤Ï\n"
-"Í­¸ú¤Ë¤·¤Æ¤ª¤­¤Þ¤·¤ç¤¦¡£"
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"/usr/include/linux/{autoconf,version}.h ÍѤË\n"
-"/boot ¤Î¥«¡¼¥Í¥ë¥Ø¥Ã¥À¤òºÆÀ¸À®¤·¤Þ¤¹"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "µ¯Æ°»þ¤Ë¥Ï¡¼¥É¥¦¥§¥¢¤Î¼«Æ°¸¡½Ð¤ÈÀßÄê¤ò¤¹¤ë¡£"
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf ¤Ï¤È¤­¤É¤­¡¢¥·¥¹¥Æ¥àÀßÄê°Ý»ý¤Î¤¿¤á¤Ëµ¯Æ°»þ¤Ë\n"
-"³Æ¼ïºî¶È¤ò¤·¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd ¤Ï¥×¥ê¥ó¥¿¥Ç¡¼¥â¥ó¤Ç¡¢lpr¤ÎÆ°ºî¤ËɬÍפǤ¹¡£´ðËÜŪ¤Ë\n"
-"¤Ï¥×¥ê¥ó¥¿¤Ë°õºþ¥¸¥ç¥Ö¤ò¿¶¤êʬ¤±¤ë¥µ¡¼¥Ð¤Ç¤¹¡£"
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux ¥Ð¡¼¥Á¥ã¥ë¥µ¡¼¥Ð¤Ï¡¢¹âÀ­Ç½¤Ç¤¤¤Ä¤Ç¤â»È¤¨¤ë¥µ¡¼¥Ð¤Î\n"
-"¹½Ãۤ˻Ȥ¤¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) ¤Ï¡¢IP¥¢¥É¥ì¥¹¤È¥Û¥¹¥È̾¤ò·ë¤Ó¤Ä¤±¤ë¤¿¤á¤Î¥É¥á¥¤¥ó̾\n"
-"¥µ¡¼¥Ð¡ÊDomain Name Server, DNS) ¤Ç¤¹¡£"
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"¥Í¥Ã¥È¥ï¡¼¥¯¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à (NFS), SMB (LanManager/Windows),\n"
-"NCP (NetWare) ¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È¤ò¤¹¤Ù¤Æ¥Þ¥¦¥ó¥È¡¦¥¢¥ó¥Þ¥¦¥ó¥È¤·¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"µ¯Æ°»þ¤ËÍ­¸ú¤Ë¤¹¤ëÀßÄê¤Î¥Í¥Ã¥È¥ï¡¼¥¯¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¤ò¤¹¤Ù¤Æ¡¢\n"
-"Í­¸ú¡¦Ìµ¸ú¤Ë¤·¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ¤ÏTCP/IP¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Ç¥Õ¥¡¥¤¥ë¶¦Í­¤ò¤¹¤ë¤Î¤Ë¤è¤¯»È¤¦¥×¥í¥È¥³¥ë\n"
-"¤Ç¤¹¡£¤³¤Î¥µ¡¼¥Ó¥¹¤Ï NFS ¥µ¡¼¥Ðµ¡Ç½¤òÄ󶡤·¤Þ¤¹¡£ÀßÄê¤Ë¤Ï/etc/exports \n"
-"¥Õ¥¡¥¤¥ë¤ò»È¤¤¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ¤ÏTCP/IP¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Ç¥Õ¥¡¥¤¥ë¶¦Í­¤ò¤¹¤ë¤Î¤Ë¤è¤¯»È¤¦¥×¥í¥È¥³¥ë\n"
-"¤Ç¤¹¡£¤³¤Î¥µ¡¼¥Ó¥¹¤Ï NFS ¥Õ¥¡¥¤¥ë¥í¥Ã¥¯µ¡Ç½¤òÄ󶡤·¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr "µ¯Æ°»þ¤Ë¥³¥ó¥½¡¼¥ë¤È XFree ¤Ç¼«Æ°Åª¤Ë numlock ¤òÍ­¸ú¤Ë¤¹¤ë¡£"
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "OKI 4w ¸ß´¹¤Îwin¥×¥ê¥ó¥¿¤ò¥µ¥Ý¡¼¥È"
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA ¥µ¥Ý¡¼¥È¤Ï¡¢¥é¥Ã¥×¥È¥Ã¥×¥³¥ó¥Ô¥å¡¼¥¿¤ÇEthernet¤ä¥â¥Ç¥à\n"
-"¤Ê¤É¤ÎPC¥«¡¼¥É¤ò»È¤¨¤ë¤è¤¦¤Ë¤¹¤ë¤¿¤á¤Î¤â¤Î¤Ç¤¹¡£ÀßÄꤹ¤ë¤Þ¤Ç\n"
-"¤Ïµ¯Æ°¤·¤Ê¤¤¤Î¤Ç¡¢É¬Íפʤ¤¥Þ¥·¥ó¤ËÆþ¤ì¤Æ¤¢¤Ã¤Æ¤â°ÂÁ´¤Ç¤¹¡£"
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper ¤Ï RPC Àܳ¤ò´ÉÍý¤·¤Þ¤¹¡£¤³¤ì¤ÏNFS¤äNIS¤Ê¤É¤Î¥×¥í¥È¥³¥ë¤Ç\n"
-"»ÈÍѤµ¤ì¤Þ¤¹¡£RPCµ¡¹½¤ò»È¤¦¥×¥í¥È¥³¥ë¤Î¥µ¡¼¥Ð¤È¤Ê¤ë¥Þ¥·¥ó¤Ç¤Ï¡¢¤³¤Î\n"
-"portmap ¥µ¡¼¥Ð¤¬Æ°¤¤¤Æ¤¤¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix ¤Ï¥á¡¼¥ëžÁ÷¥¨¡¼¥¸¥§¥ó¥È¤Ç¤¹ (MTA) ¤Ç¤¹¡£¤³¤ì¤Ï¡¢¥Þ¥·¥ó´Ö¤Ç\n"
-"¥á¡¼¥ë¤ò¤ä¤ê¤È¤ê¤¹¤ë¥×¥í¥°¥é¥à¤Ç¤¹¡£"
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Íð¿ôȯÀ¸¤Î¼Á¤ò¾å¤²¤ë¤¿¤á¤Ë¡¢¥·¥¹¥Æ¥à¤Î¥¨¥ó¥È¥í¥Ô¡¼¥×¡¼¥ë¤òÊݸ¡¦\n"
-"Éü³è¤µ¤»¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Oracle ¤Ê¤É¤Î¥¢¥×¥ê¥±¡¼¥·¥ç¥ó¤Ç»È¤¨¤ë¤è¤¦¤Ë¡¢¥Ö¥í¥Ã¥¯¥Ç¥Ð¥¤¥¹\n"
-"¤¿¤È¤¨¤Ð¥Ï¡¼¥É¥É¥é¥¤¥Ö¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¡Ë¤òÀ¸¥Ç¥Ð¥¤¥¹¤Ë³ä¤ê¤Ä¤±¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed ¥Ç¡¼¥â¥ó¤Ï¡¢RIP¥×¥í¥È¥³¥ë¤ò»È¤Ã¤ÆIP¥Æ¡¼¥Ö¥ë¤Î¼«Æ°¹¹¿·¤ò\n"
-"²Äǽ¤Ë¤·¤Þ¤¹¡£RIP ¤Ï¾®µ¬Ìϥͥåȥ¥¯¤Ç¤ÏÊØÍø¤Ç¤è¤¯»È¤ï¤ì¤Þ¤¹¤¬¡¢\n"
-"¥Í¥Ã¥È¥ï¡¼¥¯¤¬Ê£»¨¤Ë¤Ê¤Ã¤Æ¤¯¤ë¤È¡¢¤³¤ì¤Ç¤ÏÉÔ½½Ê¬¤Ç¤¹¡£"
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat¥×¥í¥È¥³¥ë¤ò»È¤¦¤È¡¢¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Î¥æ¡¼¥¶¤¬¡¢¤½¤Î¥Í¥Ã¥È¥ï¡¼¥¯\n"
-"¤ËÀܳ¤·¤¿¥Þ¥·¥ó¤Î¤¹¤Ù¤Æ¤Ë¤Ä¤¤¤Æ¡¢À­Ç½»Øɸ¤òÆÀ¤é¤ì¤ë¤è¤¦¤Ë¤Ê¤ê¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers¥×¥í¥È¥³¥ë¤Ç¤Ï¡¢¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Î¥æ¡¼¥¶¤¬¡¢±þÅú¤¹¤ë¤Û¤«¤Î¥Þ¥·¥ó\n"
-"¤Ë¥í¥°¥¤¥ó¤·¤Æ¤¤¤ë¿Í¤¿¤Á¤ò¸«¤ë¤³¤È¤¬¤Ç¤­¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho ¥Ç¡¼¥â¥ó¤¬Áö¤Ã¤Æ¤¤¤ë¥Þ¥·¥ó¤Ç¤Ï¡¢¤½¤Î¥Þ¥·¥ó¤Ë¥í¥°¥¤¥óÃæ¤Î\n"
-"¥æ¡¼¥¶°ìÍ÷¤òrwho¥×¥í¥È¥³¥ë·Ðͳ¤Ç¸«¤é¤ì¤Þ¤¹ (finger¤Ë»÷¤Æ¤¤¤Þ¤¹)¡£"
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "¥µ¥¦¥ó¥É¥·¥¹¥Æ¥à¤òµ¯Æ°"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog ¤Ï¡¢³Æ¼ï¤Î¥Ç¡¼¥â¥ó¤¬¤¤¤í¤ó¤Ê¥í¥°¥Õ¥¡¥¤¥ë¤Ë¥á¥Ã¥»¡¼¥¸¤òµ­Ï¿\n"
-"¤¹¤ë¤È¤­¤Ë»È¤¤¤Þ¤¹¡£¤º¤Ã¤Èµ¯Æ°¤·¤Æ¤ª¤¯¤Û¤¦¤¬¤¤¤¤¤Ç¤·¤ç¤¦¡£"
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "usb ¥Ç¥Ð¥¤¥¹ÍѤΥɥ饤¥Ð¤òÆɤ߹þ¤ß¤Þ¤·¤ç¤¦¡£"
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "X¥Õ¥©¥ó¥È¥µ¡¼¥Ð¤ò³«»Ï¤·¤Þ¤¹¡ÊXFree »ÈÍѤˤÏɬ¿Ü¡Ë¡£"
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "µ¯Æ°»þ¤Ë¼«Æ°Åª¤Ë¤¿¤Á¤¢¤²¤ë¥µ¡¼¥Ó¥¹¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#: ../../services.pm_.c:126
-msgid "Printing"
-msgstr "°õºþ"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr "¥Õ¥¡¥¤¥ë¶¦Í­"
-
-#: ../../services.pm_.c:132
-msgid "System"
-msgstr "¥·¥¹¥Æ¥à"
-
-#: ../../services.pm_.c:137
-msgid "Remote Administration"
-msgstr "¥ê¥â¡¼¥È´ÉÍý"
-
-#: ../../services.pm_.c:145
-msgid "Database Server"
-msgstr "¥Ç¡¼¥¿¥Ù¡¼¥¹¥µ¡¼¥Ð"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "¥µ¡¼¥Ó¥¹: %d ¤¬ %d ÍѤ˵¯Æ°¤·¤¿¤Î¤òÅÐÏ¿"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "¥µ¡¼¥Ó¥¹"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "¼Â¹ÔÃæ"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "Ää»ßÃæ"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "¥µ¡¼¥Ó¥¹¤È¥Ç¡¼¥â¥ó"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"¤³¤Î¥µ¡¼¥Ó¥¹¤Ë¤Ä¤¤¤Æ¤Ï¡¢ÄɲäÎ\n"
-"¾ðÊó¤Ï¤¢¤ê¤Þ¤»¤ó¡£¤´¤á¤ó¤Ê¤µ¤¤¡£"
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "µ¯Æ°»þ¤ÎÆ°ºî"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "¥Ñ¥Ã¥±¡¼¥¸¤Î¥¤¥ó¥¹¥È¡¼¥ëÃæ..."
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤¬Æɤá¤Þ¤»¤ó¡¤²õ¤ì¤Æ¤¤¤ë¤è¤¦¤Ç¤¹:(\n"
-"ÉÔÀµ¤Ê¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¶õÇò¤ÇËä¤á¤è¤¦¤È¤·¤Þ¤¹"
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "¥¨¥é¡¼¡ª"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "ɬÍפʲèÁü¥Õ¥¡¥¤¥ë %s ¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó¡£"
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "¼«Æ°¥¤¥ó¥¹¥È¡¼¥ëÀßÄê"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"¤³¤ì¤«¤é¼«Æ°¥¤¥ó¥¹¥È¡¼¥ë¥Õ¥í¥Ã¥Ô¡¼¤òÀßÄꤷ¤Þ¤¹¡£¤³¤Îµ¡Ç½¤Ï¤¤¤µ¤µ¤«´í¸±¤Ê¤Î¤Ç"
-"¿µ½Å¤Ë»È¤Ã¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¤³¤Îµ¡Ç½¤Ç¤Ï¡¢¤³¤Î¥³¥ó¥Ô¥å¡¼¥¿¤Ç¤ä¤Ã¤¿¥¤¥ó¥¹¥È¡¼¥ë¤òÊ̤Υޥ·¥ó¤ÇºÆ¸½¤Ç¤­¤Þ"
-"¤¹¡£¤¿¤À¤·¤È¤­¤É¤­¥×¥í¥ó¥×¥È¤¬½Ð¤Æ¡¢Ãͤ¬Êѹ¹¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"¤¤¤Á¤Ð¤ó°ÂÁ´¤Ë¤ä¤ë¤Ë¤Ï¡¢¥Ñ¡¼¥Æ¥£¥·¥ç¥óÀÚ¤ê¤È¥Õ¥©¡¼¥Þ¥Ã¥È¤Ï¼«Æ°²½¤·¤Æ¤Ï¤¤¤±¤Þ"
-"¤»¤ó¡£¤É¤ó¤Ê¥Ñ¡¼¥Æ¥£¥·¥ç¥óÊý¼°¤Ë¤·¤¿¾ì¹ç¤Ç¤â¤½¤¦¤Ç¤¹¡£\n"
-"\n"
-"³¤±¤Þ¤¹¤«¡©"
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "µ¯Æ°¥¹¥Æ¥Ã¥×ÀßÄê"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"³Æ¥¹¥Æ¥Ã¥×¤Ç¡¢¤¢¤Ê¤¿¤Î¥¤¥ó¥¹¥È¡¼¥ë¤ÈƱ¤¸¤Ë¤¹¤ë¤«¡¢¼êÆ°ÀßÄꤹ¤ë¤«¤òÁª¤Ó¤Þ¤¹¡£"
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "¤ª¤á¤Ç¤È¤¦¤´¤¶¤¤¤Þ¤¹¡ª"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"¥Õ¥í¥Ã¥Ô¡¼¤¬Àµ¤·¤¯ºî¤é¤ì¤Þ¤·¤¿¡£\n"
-"¤³¤ì¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤¬ºÆ¸½¤Ç¤­¤Þ¤¹¡£"
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "¥×¥ê¥ó¥¿¤Î¶¦Í­Àܳ"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¶¦Í­¤Ï¸½ºßÍ­¸ú"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¶¦Í­¤Î¥»¥Ã¥È¥¢¥Ã¥×¤Ï¤¹¤Ç¤Ë´°Î»¡£\n"
-"Í­¸ú¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£\n"
-"\n"
-"¤É¤¦¤·¤Þ¤¹¤«¡©"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "̵¸ú¤Ë"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "̵»ë"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "ºÆÀßÄê"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "¥µ¡¼¥Ð¤ò̵¸ú¤Ë¤·¤Æ¤¤¤Þ¤¹¡Ä¡Ä"
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¶¦Í­¤Ï̵¸ú¤Ë¤Ê¤ê¤Þ¤·¤¿¡£"
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¶¦Í­¤Ï¸½ºß̵¸ú¤Ç¤¹"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¶¦Í­¤Î¥»¥Ã¥È¥¢¥Ã¥×¤Ï¤¹¤Ç¤Ë´°Î»¡£\n"
-"̵¸ú¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£\n"
-"\n"
-"¤É¤¦¤·¤Þ¤¹¤«¡©"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "Í­¸ú¤Ë"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "¥µ¡¼¥Ð¤òÍ­¸ú¤Ë¤·¤Æ¤¤¤Þ¤¹¡Ä¡Ä"
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¶¦Í­¤¬Í­¸ú¤Ç¤¹¡£"
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"¤³¤Î¥Þ¥·¥ó¤Î¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤ò¶¦Í­¤¹¤ë¤è¤¦¤ËÀßÄꤷ¤Þ¤¹¡£\n"
-"¤³¤Îµ¡Ç½¤¬¤¢¤ë¤È¡¢¥í¡¼¥«¥ë¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Î¾¤Î¥³¥ó¥Ô¥å¡¼¥¿¤¬¡¢\n"
-"¤³¤Î¥³¥ó¥Ô¥å¡¼¥¿¤Î¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤ò»È¤¨¤Þ¤¹¡£\n"
-"Ãí¡§¥í¡¼¥«¥ë¥¨¥ê¥¢¥Í¥Ã¥È¥ï¡¼¥¯ (LAN) ¤ò¤Ä¤¯¤ë¤Ë¤Ï¡¢ÀìÍѤΥͥåȥ¥¯¥¢¥À¥×¥¿"
-"¤¬Íפê¤Þ¤¹¡£"
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹ %s (¥â¥¸¥å¡¼¥ë %s ¤ò»ÈÍÑ)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹ %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥À¥×¥¿¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"¥·¥¹¥Æ¥à¾å¤Ë¥¤¡¼¥µ¥Í¥Ã¥È¥¢¥À¥×¥¿¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó¡£ ¥Ï¡¼¥É¥¦¥§¥¢ÀßÄê¥Ä¡¼¥ë¤ò¼Â"
-"¹Ô¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥¤¥ó¥¿¡¼¥Õ¥§¥¤¥¹"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"¥·¥¹¥Æ¥à¤Ë¤ÏÀßÄꤵ¤ì¤¿¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥À¥×¥¿¤¬¤Ò¤È¤Ä¤·¤«¤¢¤ê¤Þ¤»¤ó¡§\n"
-"\n"
-"%s\n"
-"\n"
-"¤³¤Î¥¢¥À¥×¥¿¤Ç LAN ¤ËÀܳ¤·¤Þ¤¹¤Í¡£"
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"¥í¡¼¥«¥ë¥¨¥ê¥¢¥Í¥Ã¥È¥ï¡¼¥¯¤Ë¤Ä¤Ê¤¬¤ë¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥À¥×¥¿¤ò\n"
-"Áª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"·Ù¹ð¡¢¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥À¥×¥¿¤Ï¤â¤¦ÀßÄ꤬¤¹¤ó¤Ç¤¤¤Þ¤¹¡£\n"
-"ÀßÄê¤ò¤ä¤ê¤Ê¤ª¤·¤Þ¤¹¤è¡£"
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "¸½ºß¤Î %s ¤ÎÀßÄê¤Ç¤ÏLAN¥¢¥É¥ì¥¹¤¬¾×Æͤ¹¤ë¤«¤â¤·¤ì¤Þ¤»¤ó¡ª\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "¥Õ¥¡¥¤¥¢¥¦¥©¡¼¥ë¤ÎÀßÄê¤ò¸¡½Ð¡ª"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"·Ù¹ð¡ª´û¸¥Õ¥¡¥¤¥ä¥¦¥©¡¼¥ë¤ÎÀßÄê¤ò¸¡½Ð¡£\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¸å¤Ë¡¢¼êÆ°¤Ç½¤Àµ¤¬Íפ뤫ð⤷¤ì¤Þ¤»¤ó¡£"
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "ÀßÄêÃæ..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "¥¹¥¯¥ê¥×¥È¤ÎÀßÄê¡¢¥½¥Õ¥È¥¦¥§¥¢¤Î¥¤¥ó¥¹¥È¡¼¥ë¡¢¥µ¡¼¥Ð¤Îµ¯Æ°..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸ %s ¤Î¥¤¥ó¥¹¥È¡¼¥ë¤ÇÌäÂêȯÀ¸"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"ÀßÄ꤬¤¹¤Ù¤Æ½ª¤ï¤ê¤Þ¤·¤¿¡£\n"
-"¤³¤ì¤Ç¼«Æ°¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄê¡Êdhcp) ¤ò»È¤Ã¤Æ¡¢LAN ¾å¤Î¾¤Î¥Þ¥·¥ó¤È¥¤¥ó¥¿¡¼¥Í¥Ã"
-"¥ÈÀܳ¤ò¶¦Í­¤Ç¤­¤Þ¤¹¡£"
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "ÀßÄê¤Ï¤¹¤ó¤Ç¤¤¤Þ¤¹¤¬¡¢¤¤¤Þ¤Ï̵¸ú¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£"
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "ÀßÄê¤Ï¤¹¤ó¤Ç¤¤¤Æ¡¢¤¤¤Þ¤ÏÍ­¸ú¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£"
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¶¦Í­¤Ï¤Þ¤Ã¤¿¤¯ÀßÄꤵ¤ì¤Æ¤¤¤Þ¤»¤ó¡£"
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤ÎÀßÄê"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¶¦Í­¥æ¡¼¥Æ¥£¥ê¥Æ¥£¤Ø¤è¤¦¤³¤½¡ª\n"
-"\n"
-"%s\n"
-"\n"
-"ÀßÄꥦ¥£¥¶¡¼¥É¤òµ¯Æ°¤¹¤ë¤Ë¤Ï¡ÖÀßÄê¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£"
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄê (%d ¥¢¥À¥×¥¿)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "¥×¥í¥Õ¥£¡¼¥ë: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "¥×¥í¥Õ¥£¡¼¥ëºï½ü¡Ä¡Ä"
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "ºï½ü¤·¤¿¤¤¥×¥í¥Õ¥£¡¼¥ë¡§"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "¿·µ¬¥×¥í¥Õ¥£¡¼¥ë¡Ä¡Ä"
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr "ºîÀ®¤¹¤ë¥×¥í¥Õ¥£¡¼¥ë¤Î̾Á°¡Ê¿·¥×¥í¥Õ¥¡¥¤¥ë¤Ï¸½ºß¤Î¤â¤Î¤Î¥³¥Ô¡¼¤Ç¤¹¡Ë¡§"
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "¥Û¥¹¥È̾:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "¥¿¥¤¥×: "
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "¥²¡¼¥È¥¦¥§¥¤:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "¥¹¥Æ¡¼¥¿¥¹: "
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Àܳ´°Î»"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Àܳ¤µ¤ì¤Æ¤¤¤Þ¤»¤ó"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Àܳ¡Ä¡Ä"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Àܳ¤òÀÚÃÇ¡Ä¡Ä"
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Àܳ¤·¤Æ¤¤¤Þ¤¹..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Àܳ¤òÊĤ¸¤Æ¤¤¤Þ¤¹..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Àܳ¤¬ÊĤ¸¤Æ¤¤¤Þ¤»¤ó¡£\n"
-"root ¤Ë¤Ê¤Ã¤Æ¡¢°Ê²¼¤ò¼Â¹Ô¤·¤Æ¤ß¤Æ¤¯¤À¤µ¤¤¡§\n"
-"/etc/sysconfig/network-scripts/net_cnx_down"
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "¥·¥¹¥Æ¥à¤ÎÀܳ¤ÏÀÚÃǤµ¤ì¤Þ¤·¤¿¡£"
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¥¢¥¯¥»¥¹¤ÎÀßÄê"
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "LAN¤ÎÀßÄê"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "¥É¥é¥¤¥Ð"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "¥×¥í¥È¥³¥ë"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "¾õÂÖ"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "LAN ÀßÄê¡Ä¡Ä"
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr "¥¦¥£¥¶¡¼¥É¤Îµ¯Æ°¤Ë¤Ï¤³¤Á¤é¤ò¥¯¥ê¥Ã¥¯ -->"
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "ŬÍÑ"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "¾¯¡¹¤ªÂÔ¤Á¤ò¡Ä¡ÄÀßÄê¤òŬÍѤ·¤Æ¤¤¤Þ¤¹"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"ÀßÄêºÑ¤ß¤Î¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¤¬¤¢¤ê¤Þ¤»¤ó¡£\n"
-"¡ÖÀßÄê¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤Þ¤º¤½¤ì¤é¤òÀßÄꤷ¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "LAN¤ÎÀßÄê"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "¥¢¥À¥×¥¿ %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "¥Ö¡¼¥È¥×¥í¥È¥³¥ë"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "µ¯Æ°»þ¤Ë³«»Ï"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP ¥¯¥é¥¤¥¢¥ó¥È"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "¤¤¤Þ¤¹¤°Í­¸ú¤Ë"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "¤¤¤Þ¤¹¤°Ìµ¸ú¤Ë"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤¬¤¢¤ê¤Þ¤»¤ó¡£\n"
-"¡ÖÀßÄê¡×¤ò¥¯¥ê¥Ã¥¯¤·¤ÆºîÀ®¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳÀßÄê"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳÀßÄê"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Àܳ¤Î¼ïÎà: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "¥Ñ¥é¥á¡¼¥¿"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "¥¤¡¼¥µ¥Í¥Ã¥È¥«¡¼¥É"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP ¥¯¥é¥¤¥¢¥ó¥È"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "°­¼Á¤Ê¥¯¥é¥Ã¥«¡¼Íͤ⿯Æþ¤·¤Û¤¦¤À¤¤"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "¤­¤ï¤á¤ÆÄ㤤"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "¿À·Ð¼Á¤Ê¤Û¤É¹â¿å½à"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"¤³¤Î¥ì¥Ù¥ë¤ò»È¤¦¤Ê¤éÃí°Õ¤¬É¬ÍפǤ¹¡£¥·¥¹¥Æ¥à¤ò»È¤¦¤Î¤Ï´Êñ¤Ë¤Ê¤ê¤Þ¤¹¤¬¡¢\n"
-"¤À¤ì¤Ë¤Ç¤â¥¢¥¯¥»¥¹¤Ç¤­¤Æ¤·¤Þ¤¤¤Þ¤¹¡£Â¾¤Î¥Þ¥·¥ó¤ä¥¤¥ó¥¿¡¼¥Í¥Ã¥È\n"
-"¤Ë¤Ä¤Ê¤¬¤Ã¤¿¥Þ¥·¥ó¤Ç¤Ï»È¤ï¤Ê¤¤¤Ç¤¯¤À¤µ¤¤¡£¥Ñ¥¹¥ï¡¼¥ÉÀ©¸Â¤â¤¢¤ê¤Þ¤»¤ó¡£"
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"¥Ñ¥¹¥ï¡¼¥É¤¬Í­¸ú¤Ë¤Ê¤ê¤Þ¤·¤¿¤¬¡¢¥Í¥Ã¥È¥ï¡¼¥¯¤Ë¤Ä¤Ê¤°¤Î¤Ï¤Þ¤À\n"
-"¤ª¾©¤á¤Ç¤­¤Þ¤»¤ó¡£"
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"¤³¤Î¥»¥­¥å¥ê¥Æ¥£¥ì¥Ù¥ë¤Ï¤Á¤ç¤Ã¤È¤è¤¯¤Ê¤Ã¤Æ¤¤¤Æ¡¢·Ù¹ð¤ä¥Á¥§¥Ã¥¯¤¬\n"
-"Áý¤¨¤Æ¤¤¤Þ¤¹¡£"
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"¤³¤ì¤Ïɸ½à¤Î¥»¥­¥å¥ê¥Æ¥£¤Ç¡¢¥¯¥é¥¤¥¢¥ó¥È¤È¤·¤Æ¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤¹¤ë\n"
-"¥Þ¥·¥ó¤Ç¤Î¿ä¾©¥ì¥Ù¥ë¤Ç¤¹¡£¥»¥­¥å¥ê¥Æ¥£¥Á¥§¥Ã¥¯¤¬¹Ô¤ï¤ì¤Þ¤¹¡£"
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"¤³¤Î¥»¥­¥å¥ê¥Æ¥£¥ì¥Ù¥ë¤À¤È¡¢¥·¥¹¥Æ¥à¤ò¥µ¡¼¥Ð¤È¤·¤Æ»È¤¨¤ë¤è¤¦¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-"¿¿ô¤Î¥¯¥é¥¤¥¢¥ó¥È¤«¤éÀܳ¤ò¼õ¤±¤ë¥µ¡¼¥Ð¤È¤·¤Æ¤â»È¤¨¤ë¤À¤±¤Î¥»¥­¥å¥ê¥Æ¥£\n"
-"¿å½à¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£"
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"¥ì¥Ù¥ë4 ¤Î¥»¥­¥å¥ê¥Æ¥£µ¡Ç½¤Ë¤·¤Þ¤·¤¿¤¬¡¢¤³¤ì¤Ç¥·¥¹¥Æ¥à¤Ï´°Á´¤Ë¤È¤¸¤¿¾õÂÖ\n"
-"¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£¥»¥­¥å¥ê¥Æ¥£¤ÏºÇÂç¤Ç¤¹¡£"
-
-#: ../../standalone/draksec_.c:65
-msgid "Security level"
-msgstr "¥»¥­¥å¥ê¥Æ¥£¿å½à"
-
-#: ../../standalone/draksec_.c:67
-msgid "Use libsafe for servers"
-msgstr "¥µ¡¼¥Ð¤Ëlibsafe¤ò»È¤¦"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"¥Ð¥Ã¥Õ¥¡¥ª¡¼¥Ð¡¼¥Õ¥í¡¼¤ä¥Õ¥©¡¼¥Þ¥Ã¥È¥¹¥È¥ê¥ó¥°¹¶·â¤òËɸ椹¤ë¥é¥¤¥Ö¥é¥ê¡£"
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "¥»¥­¥å¥ê¥Æ¥£¥ì¥Ù¥ë¤ÎÀßÄêÃæ"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "¥³¥ó¥È¥í¡¼¥ë¥»¥ó¥¿¡¼"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "»ÈÍѤ¹¤ë¥Ä¡¼¥ë¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "»È¤¤Êý: keyboarddrake [--expert] [¥­¡¼¥Ü¡¼¥É]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "BackSpace¥­¡¼¤¬¥³¥ó¥½¡¼¥ë¤Ç¾Ãµî¤ò¤¹¤ë¤è¤¦¤Ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "CD-ROM¤òÆþ¤ìÂؤ¨¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"¥¤¥ó¥¹¥È¡¼¥ëCD ¤ò¥É¥é¥¤¥Ö¤Ë¤¤¤ì¤Æ¡¢ Ok ¤ò²¡¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"CD¤¬¤Ê¤±¤ì¤Ð¡¢Cancel ¤ò²¡¤·¤Æ¥é¥¤¥Ö¥¢¥Ã¥×¥°¥ì¡¼¥É¤ò²óÈò¤·¤Æ²¼¤µ¤¤¡£"
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "¥é¥¤¥Ö¥¢¥Ã¥×¥°¥ì¡¼¥É¤ò³«»Ï¤Ç¤­¤Þ¤»¤ó!!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "serial_usb¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "¿¿Ãæ¥Ü¥¿¥ó¤ò¥¨¥ß¥å¥ì¡¼¥È¤·¤Þ¤¹¤«¡©"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "¥Õ¥¡¥¤¥¢¥¦¥©¡¼¥ë¤ÎÀßÄê"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "¥Õ¥¡¥¤¥¢¥¦¥©¡¼¥ë¤ÎÀßÄê"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë\n"
-"\n"
-"¤¹¤Ç¤Ë¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë¤ÏÀßÄêºÑ¤ß¤Ç¤¹¡£\n"
-"¤½¤ì¤òÊѹ¹¡¦ºï½ü¤¹¤ë¤Ë¤Ï¡ÖÀßÄê¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë\n"
-"\n"
-"¡ÖÀßÄê¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Æɸ½à¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë¤òÀßÄꤷ¤Þ¤¹"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "¸À¸ì¤ÎÁªÂò"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "ƳÆþ¥¯¥é¥¹¤ÎÁªÂò"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "¥Ç¥£¥¹¥¯¤Î¸¡½Ð"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "¥Þ¥¦¥¹¤ÎÀßÄê"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "¥­¡¼¥Ü¡¼¥É¤ÎÁªÂò"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "¥»¥­¥å¥ê¥Æ¥£"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "¥Õ¥©¡¼¥Þ¥Ã¥È"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸¤ÎÁªÂò"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "¥·¥¹¥Æ¥à¤ÎƳÆþ"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "¥æ¡¼¥¶¤ÎÅÐÏ¿"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄê"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "¥µ¡¼¥Ó¥¹¤ÎÀßÄê"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "µ¯Æ°¥Ç¥£¥¹¥¯ºîÀ®"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "¥Ö¡¼¥È¥í¡¼¥ÀÀßÄê"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X ¤ÎÀßÄê"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "ƳÆþºî¶È¤ò½ªÎ»"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"¥ß¥Ë¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ëÀßÄê\n"
-"\n"
-"¤³¤Î Mandrake Linux ¥Þ¥·¥óÍѤθĿÍÍÑ¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ëÀßÄê¤ò¤·¤Þ¤¹¡£\n"
-"¶¯ÎϤÊÀìÍÑ¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë¸þ¤±¤Ë¤Ï¡¢ÀìÍѤΠMandrakeSecurity\n"
-"¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë¥Ñ¥Ã¥±¡¼¥¸¤ò¸¡Æ¤¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"¤µ¤Æ¡¢¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤·¤¿¤¤¥µ¡¼¥Ó¥¹¤Ë¤Ä¤¤¤Æ¤¤¤í¤¤¤í¤ª¿Ò¤Í¤·¤Þ¤¹¡£\n"
-"Åú¤¨¤ë¤È¤­¤Ë¤Ï¤è¤¯¹Í¤¨¤Æ¤¯¤À¤µ¤¤¡£¤¢¤Ê¤¿¤Î¥³¥ó¥Ô¥å¡¼¥¿¤Î¥»¥­¥å¥ê¥Æ¥£\n"
-"¤Ë´Ø¤ï¤ëÌäÂê¤Ç¤¹¤«¤é¡£\n"
-"\n"
-"¤³¤¦¤·¤¿¥µ¡¼¥Ó¥¹¤Ç¡¢¤¤¤Þ¼«Ê¬¤Ç»È¤Ã¤Æ¤¤¤Ê¤¤¤â¤Î¤Ï¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë\n"
-"¤Ç±£¤·¤Æ¤·¤Þ¤¤¤Þ¤·¤ç¤¦¡£¤³¤Î¥¢¥×¥ê¥±¡¼¥·¥ç¥ó¤ò¼Â¹Ô¤¹¤ì¤Ð¡¢ÀßÄê¤Ï\n"
-"¤¤¤Ä¤Ç¤âÊѹ¹¤Ç¤­¤Þ¤¹¡£"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"¤³¤Î¥Þ¥·¥ó¤Ç¡¢Á´¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤«¤é¸«¤¨¤ë¥¦¥§¥Ö¥µ¡¼¥Ð¤ò¼Â¹Ô¤·¤Þ¤¹¤«¡©\n"
-"¼«Ê¬¤Î¥Þ¥·¥ó¤À¤±¤Ç»È¤¦¥¦¥§¥Ö¥µ¡¼¥Ð¤·¤«¤Ê¤¤¤Ê¤é¡¢¤³¤³¤Ç¡Ö¤¤¤¤¤¨¡×¤È\n"
-"Åú¤¨¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"¤³¤Î¥Þ¥·¥ó¤Ç¥Í¡¼¥à¥µ¡¼¥Ð¡ÊDNS) ¤ò¼Â¹Ô¤·¤Þ¤¹¤«¡©¡¡Á´¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤Ë\n"
-"IP ¤ä¥¾¡¼¥ó¾ðÊó¤ò¸ø³«¤¹¤ë¤è¤¦ÀßÄꤷ¤Æ¤¤¤Ê¤±¤ì¤Ð¡¢¡Ö¤¤¤¤¤¨¡×¤ÈÅú¤¨¤Æ\n"
-"¤¯¤À¤µ¤¤¡£\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"³°¤«¤é¤Î Secure Shell (ssh) Àܳ¤òµö²Ä¤·¤Þ¤¹¤«¡©¡¡ssh¤Ï\n"
-"telnet¤ËÂå¤ï¤ë¤â¤Î¤Ç¡¢¥í¥°¥¤¥ó¤Ë»È¤¨¤Þ¤¹¡£¤¤¤Þ telnet ¤ò»È¤Ã¤Æ¤¤¤¿¤é\n"
-"ÀäÂÐ¤Ë ssh ¤ËÀÚ¤êÂؤ¨¤Þ¤·¤ç¤¦¡£telnet ¤Ï°Å¹æ²½¤µ¤ì¤Æ¤¤¤Þ¤»¤ó¡£¤À¤«¤é\n"
-"¥Ñ¥¹¥ï¡¼¥É¤òÅð¤Þ¤ì¤ë´í¸±¤¬¤¢¤ê¤Þ¤¹¡£ssh¤Ï°Å¹æ²½¤µ¤ì¤Æ¤¤¤ë¤Î¤Ç¡¢¤³¤¦\n"
-"¤¤¤Ã¤¿Åð¤ßÄ°¤­¤¬¤Ç¤­¤Þ¤»¤ó"
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"³°¤«¤é¤Î telnet Àܳ¤òµö²Ä¤·¤Þ¤¹¤«¡©\n"
-"¤µ¤Ã¤­ÀâÌÀ¤·¤¿¤È¤ª¤ê¡¢¤³¤ì¤Ï¤È¤ó¤Ç¤â¤Ê¤¯´í¸±¤Ê¤³¤È¤Ç¤¹¡£¤³¤³¤Ç¤Ï\n"
-"ÀäÂФˡ֤¤¤¤¤¨¡×¤ÈÅú¤¨¤Æ¡¢ssh ¤ò»È¤¦¤è¤¦¤Ë¤ª´«¤á¤·¤Þ¤¹¡£\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤Ç¥¢¥¯¥»¥¹¤Ç¤­¤ë FTP ¥µ¡¼¥Ð¤ò¼Â¹Ô¤·¤Þ¤¹¤«¡©\n"
-"¤â¤·¤½¤¦¤Ê¤é¡¢¤Ê¤ë¤Ù¤¯ Anonymous žÁ÷¤Ë¤À¤±»È¤¦¤è¤¦¤ª´«¤á¤·¤Þ¤¹¡£\n"
-"FTP ¤ÇÁ÷¿®¤¹¤ë¥Ñ¥¹¥ï¡¼¥É¤Ï¡¢¤¹¤Ù¤ÆÅðÄ°¤Ç¤­¤Þ¤¹¡£FTP ¤Ï¥Ñ¥¹¥ï¡¼¥ÉÁ÷¿®¤Ë\n"
-"°Å¹æ¤ò»È¤ï¤Ê¤¤¤«¤é¤Ç¤¹¡£\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"¥á¡¼¥ë¥µ¡¼¥Ð¤ò¼Â¹Ô¤·¤Þ¤¹¤«¡©¡¡¥á¡¼¥ë¤ÎÁ÷¿®¤Ë pine¡¢mutt¤Ê¤É¤Î\n"
-"¥Æ¥­¥¹¥È¥Ù¡¼¥¹¤Î¥á¡¼¥ë¥¯¥é¥¤¥¢¥ó¥È¤ò»È¤¦¿Í¤Ï¡¢¤¿¤Ö¤ó¥á¡¼¥ë¥µ¡¼¥Ð\n"
-"¤¬É¬ÍפǤ¹¡£¤µ¤â¤Ê¤±¤ì¤Ð¡¢¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë¤Ç±£¤·¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"POP ¥µ¡¼¥Ð¤« IMAP ¥µ¡¼¥Ð¤Ï»È¤¤¤Þ¤¹¤«¡©\n"
-"¤³¤Î¥Þ¥·¥ó·Ðͳ¤Ç¡¢web¥á¡¼¥ë°Ê³°¤Î¥á¡¼¥ë¥¢¥«¥¦¥ó¥È¤òÀßÄꤹ¤ë\n"
-"¤Ê¤éɬÍפǤ¹¡£\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"2.2 ¥«¡¼¥Í¥ë¤ò»È¤Ã¤Æ¤¤¤Þ¤¹¤Í¡£¤â¤·¥Í¥Ã¥È¥ï¡¼¥¯ IP ¤¬\n"
-"²ÈÄí¤ä¥ª¥Õ¥£¥¹¤Ç¼«Æ°³ä¤êÅö¤Æ¤Ë¤Ê¤Ã¤Æ¤¤¤ë¤Ê¤é¡¢¤½¤ì¤Ë\n"
-"±þ¤¸¤¿ÀßÄê¤ò¤·¤Þ¤¹¡£¼«Æ°³ä¤êÅö¤Æ¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¤«¡©\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"¤¢¤Ê¤¿¤Î¥³¥ó¥Ô¥å¡¼¥¿¤Ï¡¢¤Û¤«¤Î¥³¥ó¥Ô¥å¡¼¥¿¤È»þ·×¤¢¤ï¤»¤ò¤·¤Æ\n"
-"¤¤¤Þ¤¹¤«¡©¡¡¤³¤ì¤Ï¤Õ¤Ä¤¦¡¢Ã浬ÌϤ«¤éÂ絬ÌϤΠLinux/Unix ÁÈ¿¥\n"
-"¤Ç¡¢¥í¥°¥¤¥ó¤Ê¤É¤ÎƱ´ü¤ò¤È¤ë¤Î¤Ë»È¤ï¤ì¤Þ¤¹¡£¤½¤¦¤¤¤¦Â礭¤Ê\n"
-"ÁÈ¿¥¤Î°ìÉô¤Ç¤Ï¤Ê¤¯¡¢»þ·×¤¢¤ï¤»¤Ê¤ó¤«Ä°¤¤¤¿¤³¤È¤¬¤Ê¤±¤ì¤Ð¡¢\n"
-"¤¿¤Ö¤óÉÔÍפǤ¹"
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"ÀßÄ괰λ¡£Êѹ¹¤ò¥Ç¥£¥¹¥¯¤Ë½ñ¤­¹þ¤ß¤Þ¤¹¤«¡©\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "%s ¤¬³«¤±¤Þ¤»¤ó: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "½ñ¤­¹þ¤ßÍÑ¤Ë %s ¤¬³«¤±¤Þ¤»¤ó: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "¥µ¡¼¥Ð¡¢Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥³¥ó¥Ô¥å¡¼¥¿ (¥¯¥é¥¤¥¢¥ó¥È)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS ¥µ¡¼¥Ð, SMB ¥µ¡¼¥Ð, Proxy ¥µ¡¼¥Ð, SSH ¥µ¡¼¥Ð"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "¥ª¥Õ¥£¥¹´ØÏ¢"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome ¥ï¡¼¥¯¥¹¥Æ¡¼¥·¥ç¥ó"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Palm Pilot ¤ä VisorÍѥġ¼¥ë"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "¥ï¡¼¥¯¥¹¥Æ¡¼¥·¥ç¥ó"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "¥µ¡¼¥Ð¡¢¥Õ¥¡¥¤¥¢¥¦¥©¡¼¥ë/¥ë¡¼¥¿"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "¥É¥á¥¤¥ó̾¥µ¡¼¥Ð (DNS) ¤È¥Í¥Ã¥È¥ï¡¼¥¯¾ðÊ󥵡¼¥Ð¡ÊNIS)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"¥ª¥Õ¥£¥¹·Ï¥½¥Õ¥È: ¥ï¡¼¥×¥í (kword, abiword), ɽ·×»» (kspread, gnumeric), pdf"
-"¥Ó¥å¡¼¥¢¤Ê¤É"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "¥ª¡¼¥Ç¥£¥ª´ØÏ¢¥Ä¡¼¥ë¡§mp3, midi, ¥ß¥­¥µ¡¼¤Ê¤É"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Linux ¤ä¥Õ¥ê¡¼¥½¥Õ¥È´ØÏ¢¤ÎËܤä¥Ï¥¦¥Ä¡¼Ê¸½ñ"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE ¥ï¡¼¥¯¥¹¥Æ¡¼¥·¥ç¥ó"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm¤Ê¤É"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "¥Þ¥ë¥Á¥á¥Ç¥£¥¢¡§¥Ó¥Ç¥ª"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "¥á¡¼¥ë¡¢¥Ë¥å¡¼¥¹¡¢web, ¥Õ¥¡¥¤¥ëžÁ÷¡¢¥Á¥ã¥Ã¥È¤Ê¤É¤Î¥Ä¡¼¥ë"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "¥Ç¡¼¥¿¥Ù¡¼¥¹"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL ¤« MySQL ¥Ç¡¼¥¿¥Ù¡¼¥¹¥µ¡¼¥Ð"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "¥Þ¥·¥ó¤ÎÀßÄê¤ò³Ú¤Ë¤¹¤ë¥Ä¡¼¥ë"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "¥Þ¥ë¥Á¥á¥Ç¥£¥¢¡¡¥µ¥¦¥ó¥É"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "¥æ¡¼¥Æ¥£¥ê¥Æ¥£"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "¥É¥­¥å¥á¥ó¥Æ¡¼¥·¥ç¥ó"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "¥³¥ó¥½¡¼¥ë¥Ä¡¼¥ë"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix ¥á¡¼¥ë¥µ¡¼¥Ð, Inn ¥Ë¥å¡¼¥¹¥µ¡¼¥Ð"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¡¦¥¹¥Æ¡¼¥·¥ç¥ó"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "¥Þ¥ë¥Á¥á¥Ç¥£¥¢¡¦¥¹¥Æ¡¼¥·¥ç¥ó"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "ÀßÄê"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "¥°¥é¥Õ¥£¥«¥ë¤Ê¥Ç¥¹¥¯¥È¥Ã¥×¤ò¤â¤Ã¤È"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "K ¥Ç¥¹¥¯¥È¥Ã¥×´Ä¶­¡£´ðËÜŪ¤Ê¥°¥é¥Õ¥£¥¹¥¯´Ä¶­¤Ë¡¢´ØÏ¢¥Ä¡¼¥ëµÍ¤á¹ç¤ï¤»"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯´Ä¶­"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "³«È¯ÍÑ"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache ¤È Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "CD ¤ò¤Ä¤¯¤Ã¤Æ¾Æ¤¯¥Ä¡¼¥ë"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "¥ª¥Õ¥£¥¹¥ï¡¼¥¯¥¹¥Æ¡¼¥·¥ç¥ó"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm ¤Ê¤É"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "The Gimp¤Ê¤É¤Î²èÁü½èÍý¥½¥Õ¥È"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C ¤È C++ ³«È¯¥é¥¤¥Ö¥é¥ê¡¢¥×¥í¥°¥é¥à¤ä include ¥Õ¥¡¥¤¥ë"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥³¥ó¥Ô¥å¡¼¥¿¡¦¥µ¡¼¥Ð"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "¥µ¡¼¥Ð¡¢¥á¡¼¥ë/¥°¥ë¡¼¥×¥¦¥§¥¢/¥Ë¥å¡¼¥¹"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "¥²¡¼¥à¥¹¥Æ¡¼¥·¥ç¥ó"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "¥Ó¥Ç¥ª¥×¥ì¡¼¥ä¤äÊÔ½¸¥½¥Õ¥È"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "¥Þ¥ë¥Á¥á¥Ç¥£¥¢¡¡²èÁü"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "¸ä³Ú¥½¥Õ¥È¡§¥Æ¥ì¥Ó¥²¡¼¥à¡¢¥Ü¡¼¥É¥²¡¼¥à¡¢Àïά¥²¡¼¥à¤Ê¤É"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"¥á¡¼¥ë¤ä¥Ë¥å¡¼¥¹¤ÎÁ÷¼õ¿®Íѥġ¼¥ë (pine, mutt, tin..) ¤È¡¢Web¥Ö¥é¥¦¥ºÍѥġ¼¥ë"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "¥¢¡¼¥«¥¤¥Ö¥½¥Õ¥È¡¢¥¨¥ß¥å¥ì¡¼¥¿¡¢¥â¥Ë¥¿ÍÑ¥½¥Õ¥È"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "¸Ä¿Í¤Îºâ̳´ÉÍý"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "»È¤¤¤ä¤¹¤¤¥¢¥×¥ê¥±¡¼¥·¥ç¥ó¤ä¥Ç¥¹¥¯¥È¥Ã¥×¥Ä¡¼¥ë¤ò»ý¤Ä¡¢¥°¥é¥Õ¥£¥¯¥¹´Ä¶­"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "ssh ¤Ê¤É³Æ¼ï¥×¥í¥È¥³¥ëÍÑ¥¯¥é¥¤¥¢¥ó¥È"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¥²¡¼¥È¥¦¥§¥¤"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "¥µ¥¦¥ó¥É¤ä¥Ó¥Ç¥ª¤ÎºÆÀ¸ÊÔ½¸¥½¥Õ¥È"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "¤½¤Î¾¥°¥é¥Õ¥£¥Ã¥¯¥Ç¥¹¥¯¥È¥Ã¥×"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "¥¨¥Ç¥£¥¿¡¢¥·¥§¥ë¡¢¥Õ¥¡¥¤¥ë´ØÏ¢¥Ä¡¼¥ë¡¢¥¿¡¼¥ß¥Ê¥ë"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "gnucash¤Ê¤É¤Î²È·×´ÉÍý¥½¥Õ¥È"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "¥²¡¼¥à"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "¸Ä¿Í¾ðÊó´ÉÍý"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "¥Þ¥ë¥Á¥á¥Ç¥£¥¢¡¡CD ¤ò¾Æ¤¯"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "²Ê³Ø¥ï¡¼¥¯¥¹¥Æ¡¼¥·¥ç¥ó"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "/etc/sysconfig/autologin ¤¬ÆɤߤȤêÍѤ˳«¤±¤Þ¤»¤ó: %s"
-
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "¤Õ¤Ä¤¦¤Ï¡Ö/dev/hda¡×¡Ê¥×¥é¥¤¥Þ¥ê¥Á¥ã¥Í¥ë¤Î¥Þ¥¹¥¿¡¼¥É¥é¥¤¥Ö¡Ë¤«¡¢\n"
-#~ "¡Ö/dev/sda¡× (ºÇ½é¤Î SCSI ¥Ç¥£¥¹¥¯) ¤òÁª¤Ó¤Þ¤¹¡£\n"
-#~ "¼«¿®¤¬¤¢¤ë¾ì¹ç¤Ë¤À¤±Â¾¤ÎÃͤòÆþ¤ì¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥Ç¥Ð¥¤¥¹ %s ¤òºÆµ¯Æ°¤·¤Þ¤¹¡£¤¤¤¤¤Ç¤¹¤Í¡©"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤òºÆµ¯Æ°¤·¤Æ¤ß¤Þ¤¹¤«¡©"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "¤è¤í¤·¤¤¤Ç¤¹¤Í¡©"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥Ç¥Ð¥¤¥¹¤òºÆµ¯Æ°¤·¤Þ¤¹¤è:\n"
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "°Ê²¼¤Î°õºþ¥­¥å¡¼¤¬ÀßÄêºÑ¤ß¤Ç¤¹¡£\n"
-#~ "°õºþ¥­¥å¡¼¤òÄɲá¦Êѹ¹¤Ç¤­¤Þ¤¹¡£"
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Àܳ¥¿¥¤¥à¥¢¥¦¥È (ÉÃ) [ ¥Ù¡¼¥¿¡¢Ì¤¼ÂÁõ ]"
-
-#~ msgid ""
-#~ "The Mandrake Linux spreads among several CDROMs. It may be that drakX "
-#~ "has\n"
-#~ "selected packages on another CDROM than the installation CDROM, and when "
-#~ "it\n"
-#~ "needs that you put another one into the drive, it will eject the current "
-#~ "CDROM\n"
-#~ "and ask you for another one."
-#~ msgstr ""
-#~ "Mandrake Linux ¤ÏÊ£¿ô¤Î CDROM ¤Ë¤Þ¤¿¤¬¤Ã¤Æ¤¤¤Þ¤¹¡£¤Ç¤¹¤«¤é drakX ¤¬\n"
-#~ "¥¤¥ó¥¹¥È¡¼¥ëCDROM°Ê³°¤ÎCDROM¤ËÆþ¤Ã¤¿¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤ó¤À¤«¤â¤·¤ì¤Þ¤»¤ó¡£\n"
-#~ "Ê̤ÎCDROM¤¬É¬Íפˤʤ俤顢¤¤¤Þ¤ÎCDROM¤Ï¥¤¥¸¥§¥¯¥È¤µ¤ì¤Æ¡¢Ê̤ΤòÆþ¤ì¤Æ\n"
-#~ "¤¯¤ì¤ÈºÅÂ¥¤¬¤Ç¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "drakX just skips this test unless you purposely click on the "
-#~ "corresponding step\n"
-#~ "on the left. By default, drakX sees your mouse as a two-button mouse and\n"
-#~ "emulates the third button, and knows whether it's PS/2, serial or USB.\n"
-#~ "\n"
-#~ "Perhaps this is not what you want. In that case, you just have to select "
-#~ "the\n"
-#~ "right type for your mouse in the list which appears.\n"
-#~ "\n"
-#~ "You can now test your mouse. Use buttons and wheel to verify if settings "
-#~ "are\n"
-#~ "good. If not, you can click on \"Cancel\" to choose another driver."
-#~ msgstr ""
-#~ "drakX ¤Ï¡¢º¸¤ÎÂбþ¤¹¤ë¥¹¥Æ¥Ã¥×¤ò°Õ¿ÞŪ¤Ë¥¯¥ê¥Ã¥¯¤·¤Æ¤¤¤Ê¤¤¸Â¤ê¡¢¤³¤Î\n"
-#~ "¥Æ¥¹¥È¤ò¤È¤Ð¤·¤Þ¤¹¡£¥Ç¥Õ¥©¥ë¥È¤Ç¤Ï drakX ¤Ï¡¢¥Þ¥¦¥¹¤¬2¥Ü¥¿¥ó¥Þ¥¦¥¹¤À\n"
-#~ "¤ÈȽÃǤ·¤ÆÃæ±û¥Ü¥¿¥ó¤Ï¥¨¥ß¥å¥ì¡¼¥È¤·¤Þ¤¹¤·¡¢¤½¤ì¤¬ PS/2, ¥·¥ê¥¢¥ë¡¢ USB\n"
-#~ "¤Î¤É¤ì¤«¤Ï¼«Æ°È½Äꤷ¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "¤Ç¤â¡¢¤³¤ì¤Ï¤¢¤Ê¤¿¤Î¤Û¤·¤¤ÀßÄê¤Ç¤Ï¤Ê¤¤¤«¤â¤·¤ì¤Þ¤»¤ó¡£¤½¤Î¾ì¹ç¤Ë¤Ï¡¢\n"
-#~ "½Ð¤Æ¤¯¤ë°ìÍ÷¤«¤éŬÀڤʥޥ¦¥¹¤Î¼ïÎà¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "¤µ¤¢¡¢¥Þ¥¦¥¹¤ò¥Æ¥¹¥È¤·¤Æ¤ß¤Æ¤¯¤À¤µ¤¤¡£¥Ü¥¿¥ó¤ä¥Û¥¤¡¼¥ë¤ò»È¤Ã¤ÆÀßÄ꤬\n"
-#~ "Âç¾æÉפ«³Îǧ¤·¤Þ¤¹¡£¤À¤á¤Ê¤é¡Ö¥­¥ã¥ó¥»¥ë¡×¤òÁª¤ó¤ÇÊ̤Υɥ饤¥Ð¤Ë¤·¤Þ¤¹¡£"
-
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "%s ¤ò¥Ç¥Õ¥©¥ë¥È¥×¥ê¥ó¥¿¤Ë¤Ç¤­¤Þ¤»¤ó¤Ç¤·¤¿¡ª"
-
-#~ msgid "Spooler: "
-#~ msgstr "¥¹¥×¡¼¥é: "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "¥Þ¥¦¥¹¤ò¥Æ¥¹¥È¤·¤Æ¤ß¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid "Press next to continue."
-#~ msgstr "¡Ö¼¡¡×¤ò²¡¤·¤ÆÀè¤Ë¿Ê¤ß¤Þ¤·¤ç¤¦¡£"
-
-#~ msgid "/File/_New"
-#~ msgstr "/¥Õ¥¡¥¤¥ë(F)/¿·µ¬(N)"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>N"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/¥Õ¥¡¥¤¥ë(F)/³«¤¯(O)"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>O"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/¥Õ¥¡¥¤¥ë(F)/Êݸ(S)"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/¥Õ¥¡¥¤¥ë(F)/Ê̤Î̾Á°¤ÇÊݸ(A)"
-
-#~ msgid "/File/-"
-#~ msgstr "/¥Õ¥¡¥¤¥ë(F)/-"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/¥ª¥×¥·¥ç¥ó(O)/¥Æ¥¹¥È"
-
-#~ msgid "/_Help"
-#~ msgstr "/¥Ø¥ë¥×(H)"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/¥Ø¥ë¥×(H)/¤³¤Î¥½¥Õ¥È¤Ë¤Ä¤¤¤Æ(A)"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "¥Ç¥Õ¥©¥ë¥È¤Î¥é¥ó¥ì¥Ù¥ë"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "/etc/fstab ¤ò¹¹¿·"
-
-#~ msgid "Restore from file"
-#~ msgstr "¥Õ¥¡¥¤¥ë¤«¤é¥ê¥¹¥È¥¢¤¹¤ë"
-
-#~ msgid "Save in file"
-#~ msgstr "¥Õ¥¡¥¤¥ë¤Ë¥»¡¼¥Ö¤¹¤ë"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "¥Õ¥í¥Ã¥Ô¡¼¤«¤é¥ê¥¹¥È¥¢¤¹¤ë"
-
-#~ msgid "Format all"
-#~ msgstr "Á´¤Æ¤ò¥Õ¥©¡¼¥Þ¥Ã¥È"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Á´¤Æ¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥Õ¥©¡¼¥Þ¥Ã¥È¤·¤¿¸å,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "¤³¤ì¤é¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥óÃæ¤Î¥Ç¡¼¥¿¤Ï¼º¤ï¤ì¤Þ¤¹"
-
-#~ msgid "Reload"
-#~ msgstr "¥ê¥í¡¼¥É"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤Î»þ¤È¥·¥¹¥Æ¥àÍøÍÑ»þ¤Ë»È¤¤¤¿¤¤¸À¸ì¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "¥¤¥ó¥¹¥È¡¼¥ë¤ò³¤±¤ë¤Ë¤Ï¡¢¾å¤Î¥é¥¤¥»¥ó¥¹¤Î¾ò¹à¤ËƱ°Õ¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¾ò¹à¤ËƱ°Õ¤¹¤ë¤Ê¤é¡ÖƱ°Õ¤¹¤ë¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "Ʊ°Õ¤Ç¤­¤Ê¤±¤ì¤Ð¡ÖµñÈݡפòÁª¤Ó¤Þ¤¹¡£¥¤¥ó¥¹¥È¡¼¥ë¤Ï½ªÎ»¤·¡¢¸½ºß¤ÎÀßÄê¤Ï\n"
-#~ "¤½¤Î¤Þ¤Þ¤Ç¤¹"
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "¾å¤Î¥ê¥¹¥È¤«¤é¡¢¼«Ê¬¤Î¥­¡¼¥Ü¡¼¥ÉÇÛÃÖ¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "¤Û¤«¤Î¤³¤È¤Ð¡Ê¥¤¥ó¥¹¥È¡¼¥ë³«»Ï»þ¤ËÁª¤ó¤À¤Î¤È¤ÏÊ̤Τ³¤È¤Ð¡Ë¤ò˾¤à\n"
-#~ "¤Ê¤é¡¢¾å¤Î°ìÍ÷¤«¤éÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£Á´ÉôÁª¤Ö¤È¤­¤Ë¤Ï¡¢¡ÖÁ´Éô¡×¤ò\n"
-#~ "Áª¤Ù¤Ð¤À¤¤¤¸¤ç¤¦¤Ö¤Ç¤¹¡£"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "ÁªÂò:\n"
-#~ "\n"
-#~ "  - ¥«¥¹¥¿¥Þ¥¤¥º: GNU/Linux ¤Ë¾Ü¤·¤±¤ì¤Ð¡¢¼«Ê¬¤Î¥Þ¥·¥ó¤Î¼ç¤Ê»È¤¤Êý¤Ë\n"
-#~ "    ¤¢¤ï¤»¤ÆÁª¤Ó¤Þ¤·¤ç¤¦¡£¾Ü¤·¤¯¤Ï°Ê²¼¤ò»²¾È¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥¨¥­¥¹¥Ñ¡¼¥È: ¤³¤ì¤ÏËÜÅö¤ËGNU/Linux¤Ë¾Ü¤·¤¤¿Í¤¬¡¢Èó¾ï¤ËÆüì¤Ê\n"
-#~ "    ¥¤¥ó¥¹¥È¡¼¥ë¤ò¤·¤¿¤¤¾ì¹ç¤ËÁª¤Ó¤Þ¤¹¡£¡Ö¥«¥¹¥¿¥Þ¥¤¥º¡×\n"
-#~ "    ¤Î¥¤¥ó¥¹¥È¡¼¥ë¤ÈƱ¤¸¤¯¡¢¼«Ê¬¤Î¥·¥¹¥Æ¥à¤Î»È¤¤Êý¤òÁª¤Ù¤Þ¤¹¡£\n"
-#~ "    ¤Ç¤â¡¢´°Á´¤Ë¼«¿®¤¬¤Ê¤¤¤Ê¤é¡¢ÀäÂФˤ³¤ì¤Ï»È¤ï¤Ê¤¤¤Ç¤¯¤À¤µ¤¤¡ª"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "¥Þ¥·¥ó¤Î»È¤¤Êý¤ÎÁªÂò»è¡Ê¤³¤ì¤Ï¤Ä¤Þ¤ê¡¢¤¢¤Ê¤¿¤¬¥¤¥ó¥¹¥È¡¼¥ë¤ÎÁªÂò¤Ç\n"
-#~ "¡Ö¥«¥¹¥¿¥à¡×¤«¡Ö¥¨¥­¥¹¥Ñ¡¼¥È¡×¤òÁª¤ó¤À¤é»È¤¤¤Þ¤¹¡Ë¤Ï°Ê²¼¤ÎÄ̤ê:\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥ï¡¼¥¯¥¹¥Æ¡¼¥·¥ç¥ó: ¥Þ¥·¥ó¤ò¼ç¤Ë¥Ç¥¹¥¯¥È¥Ã¥×¤Î°ìÈÌÍøÍѤǻȤ¦¤Ê\n"
-#~ "    ¤é¡¢¤³¤ì¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£¥ª¥Õ¥£¥¹¶È̳¡¢²èÁü¤ÎÊÔ½¸¤Ê¤É¤Ç¥Þ¥·¥ó\n"
-#~ "    ¤ò»È¤¦¾ì¹ç¤Ë¤Ï¤³¤ì¤Ç¤¹¡£¥³¥ó¥Ñ¥¤¥é¤ä³«È¯ÍѤΥ桼¥Æ¥£¥ê¥Æ¥£¤ÏÆþ\n"
-#~ "    ¤ì¤Þ¤»¤ó¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ³«È¯ÍÑ: ̾Á°¤Î¤È¤ª¤ê¡£¤³¤Î¥Þ¥·¥ó¤ò¼ç¤Ë¥½¥Õ¥È³«È¯¤Ç»È¤¦¤Î¤Ê¤é¡¢\n"
-#~ "    ¤³¤ì¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£¥½¡¼¥¹¥³¡¼¥É¤ò¥³¥ó¥Ñ¥¤¥ë¡¢¥Ç¥Ð¥Ã¥°¡¢À°·Á\n"
-#~ "    ¤·¤¿¤ê¡¢¥½¥Õ¥È¥Ñ¥Ã¥±¡¼¥¸¤òºî¤Ã¤¿¤ê¤¹¤ë¤Î¤Ë»È¤¦¥½¥Õ¥È½¸¤¬¤¹¤Ù¤Æ\n"
-#~ "    ¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥µ¡¼¥ÐÍÑ: Mandrake Linux¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤è¤¦¤È¤·¤Æ¤¤¤ë¥Þ¥·¥ó¤ò¡¢\n"
-#~ "    ¥µ¡¼¥ÐÀìÍѤǻȤ¦¤Ä¤â¤ê¤Ê¤é¤³¤ì¤Ç¤¹¡£¥Õ¥¡¥¤¥ë¥µ¡¼¥Ð (NFS¤äSMB)¡¢\n"
-#~ "    ¥×¥ê¥ó¥¿¥µ¡¼¥Ð¡ÊUnix¤Îlp (¥é¥¤¥ó¥×¥ê¥ó¥¿) ¥×¥í¥È¥³¥ë¤«¥¦¥£¥ó¥É¥¦¥º\n"
-#~ "    ¼°¤ÎSMB·Ðͳ¤Î°õºþ¡Ë¡¢Ç§¾Ú¥µ¡¼¥Ð (NIS)¡¢¥Ç¡¼¥¿¥Ù¡¼¥¹¥µ¡¼¥Ð¤Ê¤É¤Ç¤¹¡£\n"
-#~ "    ¤³¤Î¾ì¹ç¤Ë¤Ï¡¢KDE¤äGNOME¤Ê¤É¤Î¤³¤¶¤«¤·¤¤Âåʪ¤Ï¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤»¤ó¡£"
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "¤Ç¤Ï¥¤¥ó¥¹¥È¡¼¥ë¡¦¥¢¥Ã¥×¥°¥ì¡¼¥É¤·¤¿¤¤¥Ñ¥Ã¥±¡¼¥¸·²¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "Áª¤ó¤À¤é¡¢DrakX ¤Î¤Û¤¦¤Ç¡¢¤½¤ì¤ò¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¤À¤±¤Î;͵¤¬¤¢¤ë¤«\n"
-#~ "¥Á¥§¥Ã¥¯¤·¤Þ¤¹¡£ÉÔ­¤Ê¤é·Ù¹ð¤ò½Ð¤·¤Þ¤¹¡£¤½¤ì¤Ç¤â³¤±¤¿¤±¤ì¤Ð¡¢DrakX\n"
-#~ "¤Ï¼ÂºÝ¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ë¿Ê¤ß¤Þ¤¹¤¬¡¢½ÅÍפǤʤ¤¥Ñ¥Ã¥±¡¼¥¸¤ÏÍî¤È¤·¤Þ¤¹¡£\n"
-#~ "°ìÍ÷¤ÎºÇ¸å¤Ë¡Ö¸ÄÊ̤Υѥ屡¼¥¸¤òÁªÂò¡×¤È¤¤¤¦¤Î¤¬¤¢¤ê¤Þ¤¹¡£¤³¤ì¤ò\n"
-#~ "Áª¤Ö¤È¡¢1000¸Ä°Ê¾å¤Î¥Ñ¥Ã¥±¡¼¥¸¤ò¤º¤Ã¤È¸«¤Æ¤¤¤¯¤³¤È¤Ë¤Ê¤ê¤Þ¤¹¤è..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "¤³¤³¤Ç¤Ï¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤¤¥Ñ¥Ã¥±¡¼¥¸¤ò¸ÄÊ̤ËÁª¤Ù¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥Ñ¥Ã¥±¡¼¥¸¥¦¥£¥ó¥É¥¦¤Îº¸¤¹¤ß¤Ë¤¢¤ë¥ª¥×¥·¥ç¥ó¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤È¡¢¥Ä¥ê¡¼¤ò\n"
-#~ "¤Î¤Ð¤·¤¿¤ê½Ì¤á¤¿¤ê¤Ç¤­¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥Ñ¥Ã¥±¡¼¥¸¤ò abc ½ç¤ËʤÙÂؤ¨¤¿¤±¤ì¤Ð¡¢¡Öabc½ç¤È¥°¥ë¡¼¥×½çÀÚ¤êÂؤ¨¡×\n"
-#~ "¥¢¥¤¥³¥ó¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "°Í¸´Ø·¸¤Ë¤Ä¤¤¤Æ¤Î·Ù¹ð¤¬¤¤¤é¤Ê¤±¤ì¤Ð¡¢¡Ö°Í¸´Ø·¸¼«Æ°½èÍý¡×¤ò\n"
-#~ "¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£¤³¤ì¤òÁª¤Ö¤È¡¢¤¢¤ë¥Ñ¥Ã¥±¡¼¥¸¤òÁªÂò²ò½ü\n"
-#~ "¤·¤¿¤é¡¢¤½¤ì¤Ë°Í¸¤¹¤ë¥Ñ¥Ã¥±¡¼¥¸¤â¤À¤Þ¤Ã¤Æ²ò½ü¤µ¤ì¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "¾åµ­¤Î°ìÍ÷¤ÎCD¤¬¤¹¤Ù¤Æ¤½¤í¤Ã¤Æ¤¤¤ì¤Ð¡¢Ok¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£\n"
-#~ "CD¤¬°ì¤Ä¤â¤Ê¤±¤ì¤Ð¡¢¥­¥ã¥ó¥»¥ë¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "¼ê¸µ¤Ë¤Ê¤¤CD¤¬¤¢¤ì¤Ð¡¢¤½¤ì¤òÁªÂò¤«¤é¤Ï¤º¤·¤Æ¤«¤éOk¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "¤Ç¤Ï¥Þ¥¦¥¹¤ò¥Æ¥¹¥È¤·¤Æ¤ß¤Þ¤·¤ç¤¦¡£¥Ü¥¿¥ó¤ä¥Û¥¤¡¼¥ë¤ò»È¤Ã¤Æ¤ß¤Æ\n"
-#~ "¤³¤ÎÀßÄ꤬¤¤¤¤¤«»î¤·¤Æ¤¯¤À¤µ¤¤¡£¥À¥á¤Ê¤é¡Ö¥­¥ã¥ó¥»¥ë¡×¤ò¥¯¥ê¥Ã¥¯\n"
-#~ "¤·¤ÆÊ̤Υɥ饤¥Ð¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤â¤·¥¢¥Ã¥×¥ë¤Î¥Þ¥·¥ó¤Ç¥Þ¥¦¥¹¥Ü¥¿¥ó¤¬°ì¤Ä¤·¤«¤Ê¤±¤ì¤Ð¡¢2ÈÖÌܤÈ3ÈÖÌÜ\n"
-#~ "¤Î¥Þ¥¦¥¹¥Ü¥¿¥ó¤ò¥¨¥ß¥å¡¼¥ì¡¼¥È¤¹¤ë¥­¡¼¤ÎÁȤ߹ç¤ï¤»¤¬»ØÄê¤Ç¤­¤Þ¤¹¡£\n"
-#~ "¤³¤ì¤Ç Linux ¥³¥ó¥½¡¼¥ë¤Ç¤â X ¥¦¥£¥ó¥É¥¦ GUI ¤Ç¤â¡¢¥Þ¥¦¥¹¤Îµ¡Ç½¤ò\n"
-#~ "´°Á´¤Ë»È¤¨¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "ADB ¥Þ¥¦¥¹¤ò»È¤Ã¤Æ¤¤¤ë¤È¤­¤Ï USB ¤òÁªÂò¤·¤Æ¤¯¤À¤µ¤¤¡£Linux ¥«¡¼¥Í¥ë\n"
-#~ "¤Î¤Û¤¦¤Ç¡¢¥Þ¥¦¥¹¤Î¥Ï¡¼¥É¥¦¥§¥¢¤Î¥Þ¥Ã¥Ô¥ó¥°¤ò¤­¤Á¤ó¤È½èÍý¤·¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "¥Þ¥·¥ó¤ò¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ä LAN ¤Ë¤Ä¤Ê¤®¤¿¤¤¤Ê¤é¡¢Âбþ¤¹¤ë\n"
-#~ "¥ª¥×¥·¥ç¥ó¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡¢Àµ¤·¤¤¥ª¥×¥·¥ç¥ó¤òÁª¤ÖÁ°¤Ë¡¢¤½¤Î¥Ç¥Ð¥¤¥¹\n"
-#~ "¤ÎÅŸ»¤ò¤¤¤ì¤Æ¡¢DrakX ¤Ë¼«Æ°¸¡½Ð¤µ¤»¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ä LAN ¤ËÀܳ¤·¤Ê¤¤¤Ê¤é¡¢¡Ö¥Í¥Ã¥È¥ï¡¼¥¯¤ò»È¤ï¤Ê¤¤¡×¤ò\n"
-#~ "Áª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄê¤ò¤¢¤È¤Þ¤ï¤·¤Ë¤¹¤ë¤«¡¢¤¢¤ë¤¤¤Ï¤â¤¦ÀßÄꤷ½ª¤ï¤Ã¤Æ¤¤¤ë\n"
-#~ "¤Ê¤é¡Ö´°Î»¡×¤òÁª¤Ó¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "¥â¥Ç¥à¤¬¸¡½Ð¤Ç¤­¤Þ¤»¤ó¡£¥â¥Ç¥à¤Î¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤ë¥·¥ê¥¢¥ë¥Ý¡¼¥È¤ò\n"
-#~ "Áª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "»²¹Í¤Þ¤Ç¤Ë¡¢ºÇ½é¤Î¥·¥ê¥¢¥ë¥Ý¡¼¥È¡Ê¥¦¥£¥ó¥É¥¦¥º¤Ç¤Ï¡ÖCOM1¡×¡Ë¤Ï¡¢\n"
-#~ "Linux ¤Ç¤Ï¡ÖttyS0¡×¤È¸Æ¤Ð¤ì¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "¤µ¤¢¥À¥¤¥ä¥ë¥¢¥Ã¥×¤ÎÀßÄê¤ò¤·¤Þ¤¹¡£²¿¤òÆþÎϤ·¤Æ¤¤¤¤¤«¤ï¤«¤é¤Ê¤¤¡¢\n"
-#~ "¤Þ¤¿¤Ï¼«¿®¤¬¤Ê¤¤¤È¤­¤Ï¡¢Àµ¤·¤¤¾ðÊó¤ò¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤Î¥×¥í¥Ð¥¤¥À¤Ë\n"
-#~ "¶µ¤ï¤Ã¤Æ¤¯¤À¤µ¤¤¡£DNS (¥Í¡¼¥à¥µ¡¼¥Ð) ¾ðÊó¤ò¤³¤³¤ÇÆþÎϤ·¤Ê¤±¤ì¤Ð¡¢\n"
-#~ "¤³¤Î¾ðÊó¤ÏÀܳ»þ¤Ë¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤Î¥×¥í¥Ð¥¤¥À¤«¤é¼èÆÀ¤µ¤ì¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "¥â¥Ç¥à¤¬³°ÉÕ¤±¤Ê¤é¡¢¤¤¤ÞÅŸ»¤òÆþ¤ì¤Æ¡¢DrakX¤Ë¼«Æ°Åª¤Ë¸¡½Ð¤µ¤»¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "¥â¥Ç¥à¤ÎÅŸ»¤òÆþ¤ì¤Æ¡¢Àµ¤·¤¤¤â¤Î¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "¾å¤Î¾ðÊó¤¬Àµ¤·¤¤¤«¤É¤¦¤«¤ï¤«¤é¤Ê¤¤¡¢¤¢¤ë¤¤¤Ï²¿¤òÆþÎϤ¹¤ë¤«\n"
-#~ "¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢Àµ¤·¤¤¾ðÊó¤ò¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤Î¥×¥í¥Ð¥¤¥À¡ÊISP) ¤Ë\n"
-#~ "¶µ¤ï¤Ã¤Æ¤¯¤À¤µ¤¤¡£DNS (¥Í¡¼¥à¥µ¡¼¥Ð) ¾ðÊó¤ò¤³¤³¤ÇÆþÎϤ·¤Ê¤±¤ì¤Ð¡¢\n"
-#~ "¤³¤Î¾ðÊó¤ÏÀܳ»þ¤Ë¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤Î¥×¥í¥Ð¥¤¥À¤«¤é¼èÆÀ¤µ¤ì¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "¤Ç¤Ï¡¢É¬Íפʤé¥Û¥¹¥È̾¤òÆþ¤ì¤Æ¤¯¤À¤µ¤¤¡£¤â¤·¤ï¤«¤é¤Ê¤¤¤«¡¢\n"
-#~ "²¿¤òÆþÎϤ·¤Æ¤¤¤¤¤«¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢ISP¤ËÀµ¤·¤¤¾ðÊó¤ò¶µ¤ï¤Ã¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "¤½¤ì¤Ç¤Ï¥Í¥Ã¥È¥ï¡¼¥¯¥Ç¥Ð¥¤¥¹¤òÀßÄꤷ¤Þ¤·¤ç¤¦:\n"
-#~ "\n"
-#~ "  - IP ¥¢¥É¥ì¥¹: ¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢¥Í¥Ã¥È¥ï¡¼¥¯´ÉÍý¼Ô¤Ë¤­¤¤¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "    ²¼¤Ç¡Ö¼«Æ° IP¡× ¥ª¥×¥·¥ç¥ó¤òÁª¤Ö¤Ê¤é¡¢ÆþÎϤ·¤Ê¤¤¤Ç¤¯¤À¤µ¤¤\n"
-#~ "\n"
-#~ "  - ¥Í¥Ã¥È¥Þ¥¹¥¯: ¡Ö255.255.255.0¡×¤Ë¤·¤Æ¤ª¤¯¤Î¤¬ÌµÆñ¤Ç¤¹¡£¼«¿®¤¬¤Ê¤±¤ì"
-#~ "¤Ð\n"
-#~ "¥Í¥Ã¥È¥ï¡¼¥¯´ÉÍý¼Ô¤Ë¤­¤¤¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¼«Æ° IP: ¥Í¥Ã¥È¥ï¡¼¥¯¤Ç BOOTP ¤« DHCP ¥×¥í¥È¥³¥ë¤ò»È¤Ã¤Æ¤¤¤¿¤é\n"
-#~ "¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£¤³¤ì¤òÁª¤Ö¤È¡¢¡ÖIP ¥¢¥É¥ì¥¹¡×¤ò»ØÄê\n"
-#~ "¤¹¤ëɬÍפϤ¢¤ê¤Þ¤»¤ó¡£¼«¿®¤¬¤Ê¤±¤ì¤Ð¡¢¥Í¥Ã¥È¥ï¡¼¥¯´ÉÍý¼Ô¤Ë¤­¤¤¤Æ\n"
-#~ "¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "¤µ¤Æ¡¢É¬Íפʤ鼫ʬ¤Î¥Û¥¹¥È̾¤òÆþÎϤ·¤Þ¤·¤ç¤¦¡£\n"
-#~ "¤ï¤«¤é¤Ê¤¤¤«¼«¿®¤¬¤Ê¤±¤ì¤Ð¥Í¥Ã¥È¥ï¡¼¥¯´ÉÍý¼Ô¤Ë¤­¤¤¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "¤³¤³¤ÇɬÍפʤ顢¥Û¥¹¥È̾¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤¡£¤â¤·\n"
-#~ "¤ï¤«¤é¤Ê¤¤¤«¼«¿®¤¬¤Ê¤±¤ì¤Ð¡¢¶õ¤±¤Æ¤ª¤­¤Þ¤·¤ç¤¦¡£"
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "¤Ç¤Ï¥À¥¤¥ä¥ë¥¢¥Ã¥×¤ÎÀßÄê¤ò¤·¤Þ¤¹¡£²¿¤òÆþÎϤ·¤Æ¤¤¤¤¤«¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢\n"
-#~ "ISP¤ËÀµ¤·¤¤¾ðÊó¤ò¶µ¤ï¤Ã¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "¥×¥í¥­¥·¤ò»È¤¦¤Ê¤é¡¢¤³¤³¤ÇÀßÄꤷ¤Þ¤·¤ç¤¦¡£¥×¥í¥­¥·¤ò»È¤¦¤«¤É¤¦¤«\n"
-#~ "¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢¥Í¥Ã¥È¥ï¡¼¥¯´ÉÍý¼Ô¤«ISP¤Ë¤­¤¤¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤ÎÀßÄ꤬Àµ¤·¤±¤ì¤Ð¡¢¤³¤³¤Ç°Å¹æ¥Ñ¥Ã¥±¡¼¥¸¤ò¥¤¥ó¥¹¥È¡¼¥ë\n"
-#~ "¤Ç¤­¤Þ¤¹¡£¤Þ¤º¥Ñ¥Ã¥±¡¼¥¸¤ò¤È¤Ã¤Æ¤¯¤ë¥µ¥¤¥È¤òÁª¤ó¤Ç¡¢¤½¤ì¤«¤é¥¤¥ó¥¹¥È¡¼¥ë\n"
-#~ "¤¹¤ë¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤Ó¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "¤Ê¤ª¡¢¥µ¥¤¥È¤ÎÁªÂò¤È°Å¹æ¥Ñ¥Ã¥±¡¼¥¸¤ÎÁªÂò¤Ï¡¢¼«Ê¬¤Î¤È¤³¤í¤ÎË¡µ¬À©¤Ë¤¢¤Ã¤¿\n"
-#~ "¤â¤Î¤Ë¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "¤µ¤Æ¡¢¼«Ê¬¤Îµï¾ì½ê¤Ë¤¢¤ï¤»¤¿¥¿¥¤¥à¥¾¡¼¥ó¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£"
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "ÀßÄꤹ¤ë¥×¥ê¥ó¥¿¤Ï¡¢¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¡Ê¤³¤Î¥Þ¥·¥ó¤ËľÀܤĤʤ¬¤Ã¤¿¤â¤Î¡Ë¤Ç"
-#~ "¤â\n"
-#~ "¥ê¥â¡¼¥È¥×¥ê¥ó¥¿ (Unix, Netware, MS Windows ¤Î¥Í¥Ã¥È¥ï¡¼¥¯·Ðͳ¤Î¤â¤Î¡Ë¤Ç"
-#~ "¤â\n"
-#~ "¤«¤Þ¤¤¤Þ¤»¤ó¡£"
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "°õºþ¤Ç¤­¤ë¤è¤¦¤Ë¤·¤¿¤¤¤Ê¤é¤Ð¡¢CUPS ¤È LPR¤Î¤É¤Á¤é¤«¤Î°õºþ¥·¥¹¥Æ¥à¤ò\n"
-#~ "Áª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS ¤Ï¿·¤·¤¤¡¢¶¯ÎϤǽÀÆð¤Ê Unix ÍÑ°õºþ¥·¥¹¥Æ¥à¤Ç¤¹ (CUPS¤È¤¤¤¦¤Î¤Ï\n"
-#~ "¡ÖCommon Unix Printing System¡×¤Îά)¡£Mandrake Linux¤Ç¤Ï¤³¤ì¤¬¥Ç¥Õ¥©¥ë¥È\n"
-#~ "¤Ç¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR ¤Ï¸Å¤¤°õºþ¥·¥¹¥Æ¥à¤Ç¡¢ÀΤΠMandrake Linux ¤Ç»È¤Ã¤Æ¤¤¤Þ¤·¤¿¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥×¥ê¥ó¥¿¤ò»ý¤Ã¤Æ¤¤¤Ê¤±¤ì¤Ð¡¢¡Ö¤Ê¤·¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£"
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux ¤Ï³Æ¼ï¤Î¥×¥ê¥ó¥¿¤ò°·¤¨¤Þ¤¹¡£¤½¤ì¤¾¤ìÀßÄ꤬¤Á¤¬¤Ã¤Æ¤­¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤â¤·¥×¥ê¥ó¥¿¤¬¥Þ¥·¥ó¤ËľÀܤĤʤ¬¤Ã¤Æ¤¤¤ë¤Ê¤é¡¢¡Ö¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¡×¤ò\n"
-#~ "Áª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥ê¥â¡¼¥È¤Î Unix ¥Þ¥·¥ó¤Ë¤Ä¤Ê¤¬¤Ã¤¿¥×¥ê¥ó¥¿¤ò¥¢¥¯¥»¥¹¤·¤¿¤¤¾ì¹ç¤Ë¤Ï¡¢\n"
-#~ "¡Ö¥ê¥â¡¼¥È¥×¥ê¥ó¥¿¡×¤òÁª¤Ó¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥ê¥â¡¼¥È¤Î MS Windows ¥Þ¥·¥ó¤Ë¤Ä¤Ê¤¬¤Ã¤¿¥×¥ê¥ó¥¿¤ò¥¢¥¯¥»¥¹¤¹¤ë¤Ê¤é\n"
-#~ "(¤¢¤ë¤¤¤Ï SMB ¥×¥í¥È¥³¥ë¤ò»È¤Ã¤¿ Unix ¥Þ¥·¥ó¤Î¥×¥ê¥ó¥¿¡Ë¡¢Áª¤Ö¤Î¤Ï\n"
-#~ "¡ÖSMB/Windows 95/98/NT¡×¤Ç¤¹¡£"
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "¤³¤³¤Ç¤Þ¤º¥×¥ê¥ó¥¿¤ÎÅŸ»¤òÆþ¤ì¤Æ¡¢DrakX ¤¬¸¡½Ð¤Ç¤­¤ë¤è¤¦¤Ë¤·¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "¤µ¤é¤Ë¤¤¤¯¤Ä¤«¾ðÊó¤¬Íפê¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ¥×¥ê¥ó¥¿Ì¾: ¥×¥ê¥ó¥¿¤Î¥¹¥×¡¼¥é¤Ï¡¢¥Ç¥Õ¥©¥ë¥È¤Î¥×¥ê¥ó¥¿Ì¾¤È¤·¤Æ¡Ölp¡×"
-#~ "¤ò\n"
-#~ "     »È¤¤¤Þ¤¹¡£¤À¤«¤é¡Ölp¡×¤È¤¤¤¦¥×¥ê¥ó¥¿¤¬É¬ÍפǤ¹¡£¤â¤·¥×¥ê¥ó¥¿¤¬\n"
-#~ "     °ìÂæ¤À¤±¤Ç¤â¡¢Ì¾Á°¤ÏÊ£¿ô»ý¤¿¤»¤é¤ì¤Þ¤¹¡£¤¿¤À¡¢¤½¤ì¤ò¥Ñ¥¤¥×ʸ»ú¡Ö¡Ã¡×"
-#~ "¤Ç\n"
-#~ "     ¶èÀÚ¤ì¤Ð¤¤¤¤¤Î¤Ç¤¹¡£¤Ç¤¹¤«¤é¡¢¤â¤Ã¤È°ÕÌ£¤Î¤¢¤ë̾Á°¤Ë¤·¤¿¤±¤ì¤Ð¡¢\n"
-#~ "     ¤½¤ì¤ò¤Þ¤º»ý¤Ã¤Æ¤­¤Þ¤·¤ç¤¦¡£¡ÖMy printer|lp¡×¤È¤¤¤¦¶ñ¹ç¡£\n"
-#~ "     ̾Á°¤Ë¡Ölp¡×¤Î¤Ä¤¤¤¿¥×¥ê¥ó¥¿¤¬¥Ç¥Õ¥©¥ë¥È¤Î¥×¥ê¥ó¥¿¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ÀâÌÀ: ¤³¤ì¤Ï¤Ê¤¯¤Æ¤â¤¤¤¤¤Ç¤¹¤¬¡¢Ê£¿ô¤Î¥×¥ê¥ó¥¿¤ò»ý¤Ã¤Æ¤¤¤¿¤ê¡¢¤Û¤«"
-#~ "¤Î\n"
-#~ "     ¥Þ¥·¥ó¤¬¤³¤Î¥×¥ê¥ó¥¿¤Ë¥¢¥¯¥»¥¹¤¹¤ë¤È¤­¤ËÊØÍø¤Ç¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ¾ì½ê: ¤â¤·¥×¥ê¥ó¥¿¤Î¾ì½ê¤Ë¤Ä¤¤¤Æ¾ðÊó¤òÆþ¤ì¤¿¤±¤ì¤Ð¡¢¤³¤³¤Ë\n"
-#~ "     ÆþÎϤ·¤Þ¤·¤ç¤¦¡Ê¡ÖÆ󳬡פȤ«¹¥¤­¤Êµ­½Ò¤Ç¤«¤Þ¤¤¤Þ¤»¤ó¡Ë¡£\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "¤³¤³¤Ç¤¤¤í¤¤¤í¾ðÊó¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ¥­¥å¡¼¤Î̾Á°: ¥×¥ê¥ó¥¿¤Î¥¹¥×¡¼¥é¤Ï¡¢¥Ç¥Õ¥©¥ë¥È¤Ç¤Ï¡Ölp¡×¤ò»È¤¤¤Þ"
-#~ "¤¹¡£\n"
-#~ "     ¤À¤«¤é¡Ölp¡×¤È¤¤¤¦¥×¥ê¥ó¥¿¤¬É¬ÍפǤ¹¡£\n"
-#~ "     ¤â¤·¥×¥ê¥ó¥¿¤¬°ìÂæ¤À¤±¤Ç¤â¡¢Ì¾Á°¤ÏÊ£¿ô»ý¤¿¤»¤é¤ì¤Þ¤¹¡£¤¿¤À¡¢¤½¤ì¤ò\n"
-#~ "     ¥Ñ¥¤¥×ʸ»ú¡Ö¡Ã¡×¤Ç¶èÀÚ¤ì¤Ð¤¤¤¤¤Î¤Ç¤¹¡£¤Ç¤¹¤«¤é¡¢¤â¤Ã¤È°ÕÌ£¤Î¤¢¤ë\n"
-#~ "     ̾Á°¤Ë¤·¤¿¤±¤ì¤Ð¡¢¤½¤ì¤ò¤Þ¤º»ý¤Ã¤Æ¤­¤Þ¤·¤ç¤¦¡£¡ÖMy printer|lp¡×¤È\n"
-#~ "     ¤¤¤¦¶ñ¹ç¡£\n"
-#~ "     ̾Á°¤Ë¡Ölp¡×¤Î¤Ä¤¤¤¿¥×¥ê¥ó¥¿¤¬¥Ç¥Õ¥©¥ë¥È¤Î¥×¥ê¥ó¥¿¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ¥¹¥×¡¼¥ë¥Ç¥£¥ì¥¯¥È¥ê: ¤³¤Î¥Ç¥£¥ì¥¯¥È¥ê¤Ë°õºþ¥¸¥ç¥Ö¤¬Êݸ¤µ¤ì¤Þ¤¹¡£\n"
-#~ "     ²¿¤ò»È¤¦¤Ù¤­¤«¤ï¤«¤é¤Ê¤±¤ì¤Ð¥Ç¥Õ¥©¥ë¥È¤Î¤Þ¤Þ¤Ë¤·¤Æ¤ª¤­¤Þ¤·¤ç¤¦\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ¥×¥ê¥ó¥¿Àܳ: ¥×¥ê¥ó¥¿¤¬¥Þ¥·¥ó¤ËľÀܤĤʤ¬¤Ã¤Æ¤¤¤ë¾ì¹ç¤Ï¡¢\n"
-#~ "     ¡Ö¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¡×¤òÁª¤Ó¤Þ¤¹¡£¥ê¥â¡¼¥È¤ÎUnix¥Þ¥·¥ó¾å¤Î¥×¥ê¥ó¥¿¤ò\n"
-#~ "     »È¤¦¤Ë¤Ï¡¢¡Ö¥ê¥â¡¼¥Èlpd¥×¥ê¥ó¥¿¡×¤òÁª¤Ó¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "     ¥ê¥â¡¼¥È¤Î¥¦¥£¥ó¥É¥¦¥º¥Þ¥·¥ó¡Ê¤Þ¤¿¤ÏSMB ¥×¥í¥È¥³¥ë»ÈÍѤÎUnix¥Þ¥·¥ó\n"
-#~ "     ¾å¤Î¥×¥ê¥ó¥¿¤ò¥¢¥¯¥»¥¹¤¹¤ë¤Ë¤Ï¡¢¡ÖSMB/Windows 95/98/NT¡×¤òÁª¤Ó¤Þ"
-#~ "¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "     NetWare ¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Î¥×¥ê¥ó¥¿¤ò¥¢¥¯¥»¥¹¤·¤¿¤±¤ì¤Ð¡¢\n"
-#~ "     ¡ÖNetWare¡×¤òÁª¤Ó¤Þ¤¹¡£\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "¥×¥ê¥ó¥¿¤¬¸¡½Ð¤Ç¤­¤Þ¤»¤ó¡£¥×¥ê¥ó¥¿¤¬Àܳ¤µ¤ì¤¿¥Ç¥Ð¥¤¥¹Ì¾¤òÆþÎϤ·¤Æ\n"
-#~ "¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤Á¤Ê¤ß¤Ë¡¢¥×¥ê¥ó¥¿¤Ï¤Õ¤Ä¤¦¤ÏºÇ½é¤Î¥Ñ¥é¥ì¥ë¥Ý¡¼¥È¤Ë¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤ë¤â¤Î¤Ç"
-#~ "¤¹¡£\n"
-#~ "¤³¤ì¤ÏGNU/Linux ¤Ç¤Ï¡Ö/dev/lp0¡×¤À¤·¡¢¥¦¥£¥ó¥É¥¦¥º¤Ç¤Ï¡ÖLPT1¡×¤Ë¤Ê¤ê¤Þ¤¹¡£"
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "¤µ¤¢¾å¤Î°ìÍ÷¤«¤é¼«Ê¬¤Î¥×¥ê¥ó¥¿¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "¼«Ê¬¤Î¥×¥ê¥ó¥¿¤Ë¤¢¤Ã¤¿¡¢Àµ¤·¤¤¥ª¥×¥·¥ç¥ó¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "¤Ê¤Ë¤òÁª¤Ö¤«¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢¥×¥ê¥ó¥¿¤Î»ñÎÁ¤ò¸«¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¼¡¤Î¥¹¥Æ¥Ã¥×¤ÇÀßÄê¤ò¥Æ¥¹¥È¤Ç¤­¤Þ¤¹¤·¡¢¤½¤ì¤¬»×¤¤Ä̤ê¤Ëµ¡Ç½¤·¤Ê¤±¤ì¤Ð\n"
-#~ "¤½¤³¤ÇÊѤ¨¤é¤ì¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "¤Ç¤ÏMandrake Linux¥·¥¹¥Æ¥à¤Îroot¥Ñ¥¹¥ï¡¼¥É¤òÀßÄꤷ¤Þ¤·¤ç¤¦¡£\n"
-#~ "¥Ñ¥¹¥ï¡¼¥É¤Ï 2 ²óÆþÎϤ·¤Æ¡¢¥¿¥¤¥×¥ß¥¹¤¬¤Ê¤¤¤«¤É¤¦¤«¤ò³Îǧ¤·¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "Root¤È¤¤¤¦¤Î¤Ï¥·¥¹¥Æ¥à¤Î´ÉÍý¼Ô¤Ç¡¢¥·¥¹¥Æ¥à¤ÎÀßÄê¤òÊѤ¨¤é¤ì¤ëÍ£°ì¤Î\n"
-#~ "¿Íʪ¤Ç¤¹¡£¤Ç¤¹¤«¤é¡¢¤³¤Î¥Ñ¥¹¥ï¡¼¥É¤òÆþÎϤ¹¤ë¤È¤­¤ÏÃí°Õ¤·¤Æ¤¯¤À¤µ¤¤¡ª\n"
-#~ "root¸¢¸Â¤òÉÔÀµ¤Ë»È¤¦¤È¡¢¤³¤Î¥·¥¹¥Æ¥à¤ä¡¢¥Í¥Ã¥È¥ï¡¼¥¯¤Ç¤Ä¤Ê¤¬¤Ã¤¿Â¾¤Î\n"
-#~ "¥·¥¹¥Æ¥à¤ä¤½¤Î¥Ç¡¼¥¿¤Ë½ÅÂç¤Ê´í¸±¤òµÚ¤Ü¤¹¤³¤È¤Ë¤Ê¤ê¤«¤Í¤Þ¤»¤ó¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥Ñ¥¹¥ï¡¼¥É¤Ï¡¢¥¢¥ë¥Õ¥¡¥Ù¥Ã¥È¤ä¿ô»ú¤òº®¤¼¤¿¤â¤Î¤Ë¤·¤Æ¡¢ºÇÄã¤Ç¤â 8 ʸ»ú\n"
-#~ "ɬÍפǤ¹¡£*ÀäÂФË*¥á¥â¤Ã¤Æ¤ª¤¤¤¿¤ê¤·¤Æ¤Ï¤¤¤±¤Þ¤»¤ó¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤Ç¤âŤ¹¤®¤¿¤ê¤ä¤ä¤³¤·¤¹¤®¤¿¤ê¤¹¤ë¥Ñ¥¹¥ï¡¼¥É¤â¥À¥á¤Ç¤¹¤è¡£¼«Ê¬¤Ç¤Ï\n"
-#~ "³Ú¤Ë»×¤¤¤À¤»¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "If your network uses LDAP (or NIS) protocol for authentication, select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "¥Í¥Ã¥È¥ï¡¼¥¯¤Çǧ¾Ú¤Ë LDAP (¤Þ¤¿¤Ï NIS) ¤ò»È¤Ã¤Æ¤¤¤ë¤Ê¤é¡¢Ç§¾Ú¤Î¤È¤³¤í¤Ç\n"
-#~ "\"LDAP\" (¤Þ¤¿¤Ï \"NIS\") ¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢¥Í¥Ã¥È¥ï¡¼¥¯\n"
-#~ "¤Î´ÉÍý¼Ô¤Ë¤­¤­¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "¤â¤·¥³¥ó¥Ô¥å¡¼¥¿¤¬´ÉÍý¼Ô¤Ä¤­¥Í¥Ã¥È¥ï¡¼¥¯¤Ë¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤Ê¤¤¤Ê¤é\n"
-#~ "ǧ¾Ú¤Ë¤Ï \"¥í¡¼¥«¥ë¥Õ¥¡¥¤¥ë\" ¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£"
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "¤Ç¤Ï¤³¤³¤Ç¡¢¡ÖÄ̾ï¤Î¡×¥æ¡¼¥¶¥¢¥«¥¦¥ó¥È¤ò¤Ä¤¯¤ê¤Þ¤¹¡£\n"
-#~ "¤³¤ì¤Ï¡ÖÆø¢¡×¥æ¡¼¥¶¥¢¥«¥¦¥ó¥È¤Îroot ¤È¤Ï¤Á¤¬¤¤¤Þ¤¹¡£¤³¤Î¥·¥¹¥Æ¥à¤ò\n"
-#~ "»È¤¦¿Í¤¿¤Á¤Ë¡¢¤½¤ì¤¾¤ìÊÌ¡¹¤Î¥¢¥«¥¦¥ó¥È¤ò¤Ä¤¯¤ë¤è¤¦¤Ë¤·¤Þ¤¹¡£³Æ¥¢¥«¥¦\n"
-#~ "¥ó¥È¤ÏÆȼ«¤Î´Ä¶­ÀßÄê¡Ê¥°¥é¥Õ¥£¥Ã¥¯´Ä¶­¡¢¥×¥í¥°¥é¥àÀßÄê¤Ê¤É¡Ë¤ò»ý¤Á¡¢\n"
-#~ "¤½¤ì¤¾¤ì¼«Á°¤Î¡Ö¥Û¡¼¥à¥Ç¥£¥ì¥¯¥È¥ê¡×¤ò»ý¤Ã¤Æ¤½¤³¤Ë¤³¤¦¤¤¤¦ÀßÄê¤òÊݸ\n"
-#~ "¤·¤Æ¤ª¤­¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤Þ¤º¤Ï¼«Ê¬ÍѤΥ¢¥«¥¦¥ó¥È¤ò¤Ä¤¯¤Ã¤Æ¤¯¤À¤µ¤¤¡ª¡¡¥æ¡¼¥¶¤¬¤¢¤Ê¤¿°ì¿Í¤Ç¤â¡¢\n"
-#~ "¤Õ¤À¤ó¥·¥¹¥Æ¥à¤ò»È¤¦¤È¤­¤Ë¤Ï¡¢root¤ò»È¤Ã¤Æ¤Ï*¤¤¤±¤Þ¤»¤ó¡ª*\n"
-#~ "¤³¤ì¤ò¤ä¤ë¤È¡¢¥»¥­¥å¥ê¥Æ¥£¾å¤Î¥ê¥¹¥¯¤¬¤­¤ï¤á¤ÆÂ礭¤¯¤Ê¤ê¤Þ¤¹¡£¤Á¤ç¤Ã¤È\n"
-#~ "¤·¤¿¥¿¥¤¥×¥ß¥¹¤Ç¡¢¥·¥¹¥Æ¥à¤ò²õ¤¹¤ª¤½¤ì¤â½Ð¤Æ¤­¤Þ¤¹¤è¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤·¤¿¤¬¤Ã¤Æ¡¢¤Õ¤Ä¤¦¤Ï¤³¤³¤Ç¤Ä¤¯¤ë¥æ¡¼¥¶¥¢¥«¥¦¥ó¥È¤Ç¥·¥¹¥Æ¥à¤ò»È¤¤¤Þ¤·¤ç\n"
-#~ "¤¦¡£root¤Ç¥í¥°¥¤¥ó¤¹¤ë¤Î¤Ï¡¢¥·¥¹¥Æ¥à´ÉÍý¤È¥á¥ó¥Æ¥Ê¥ó¥¹¤Î¤È¤­¤À¤±¤Ç¤¹¡£"
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "µ¯Æ°¥Ç¥£¥¹¥¯¤ÏÀ§Èó¤È¤â¤Ä¤¯¤Ã¤Æ¤ª¤¤¤Æ¤¯¤À¤µ¤¤¡£¥Þ¥·¥ó¤òµ¯Æ°¤Ç¤­¤Ê¤¯\n"
-#~ "¤Ê¤Ã¤¿¤é¡¢¤³¤ì¤¬ºÆ¥¤¥ó¥¹¥È¡¼¥ë¤»¤º¤Ë¥Ç¥£¥¹¥¯¤òµß¤¦Í£°ì¤Î¼êÃʤǤ¹¡£"
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO ¤È grub ¤Î¼çÍ×¥ª¥×¥·¥ç¥ó¤Ï°Ê²¼¤Î¤È¤ª¤ê¤Ç¤¹:\n"
-#~ "  - ¥Ö¡¼¥È¥Ç¥Ð¥¤¥¹: ¥Ö¡¼¥È¥»¥¯¥¿¤ò»ý¤Ä¥Ç¥Ð¥¤¥¹Ì¾¤òÀßÄê¡Ê¤¿¤È¤¨¤Ð¥Ï¡¼¥É\n"
-#~ "¥Ç¥£¥¹¥¯¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¡Ë¡£¼«¿®¤¬¤Ê¤¤¸Â¤ê¡¢¡Ö/dev/hda¡×¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥Ç¥Õ¥©¥ë¥È¥¤¥á¡¼¥¸µ¯Æ°¤ÎÂÔ¤Á»þ´Ö: ¥Ö¡¼¥È¥í¡¼¥À¤¬ºÇ½é¤Î¥¤¥á¡¼¥¸¤òµ¯Æ°\n"
-#~ "¤¹¤ë¤Þ¤Ç¤ÎÂÔ¤Á»þ´Ö¤ò1/10ÉÃñ°Ì¤Ç»ØÄꤷ¤Þ¤¹¡£¤³¤ì¤Ï¡¢¥­¡¼¥Ü¡¼¥É¤¬Í­¸ú¤Ë\n"
-#~ "¤Ê¤Ã¤Æ¤¹¤°¤Ë¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤«¤éµ¯Æ°¤¹¤ë¥·¥¹¥Æ¥à¤Ê¤É¤ÇÊØÍø¤Ç¤¹¡£¤³¤Î\n"
-#~ "¡ÖÂÔ¤Á»þ´Ö¡×¤¬Ìµµ­Æþ¤À¤Ã¤¿¤ê¥¼¥í¤À¤Ã¤¿¤ê¤·¤¿¤é¡¢¥Ö¡¼¥È¥í¡¼¥À¤ÏÂÔ¤Á¤Þ¤»"
-#~ "¤ó¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥Ó¥Ç¥ª¥â¡¼¥É¡§µ¯Æ°»þ¤Ë»È¤¦ VGA ¥Æ¥­¥¹¥È¥â¡¼¥É¤ò»ØÄꤷ¤Þ¤¹¡£»È¤¨¤ë¤Î"
-#~ "¤Ï\n"
-#~ "°Ê²¼¤ÎÃͤǤ¹¡§\n"
-#~ "\n"
-#~ "    * ¥Î¡¼¥Þ¥ë: Ä̾ï¤Î 80x25 ¤Î¥Æ¥­¥¹¥È¥â¡¼¥É\n"
-#~ "\n"
-#~ "    * <¿ô»ú>:  ¿ô»ú¤ËÂбþ¤·¤¿¥Æ¥­¥¹¥È¥â¡¼¥É\n"
-#~ "\n"
-#~ "  - µ¯Æ°¤Î¤¿¤Ó¤Ë \"/tmp\" ¤ò¥¯¥ê¥¢: ¥·¥¹¥Æ¥àµ¯Æ°»þ¤Ë \"/tmp\" Æâ¤ÎÁ´¥Õ¥¡¥¤"
-#~ "¥ë¤ä¥Ç¥£¥ì¥¯¥È¥ê¤ò\n"
-#~ "¾Ãµî¤·¤¿¤±¤ì¤Ð¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤Ó¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ɬÍפ˱þ¤¸¤Æ¸·Ì©¤Ê RAM »ØÄê: »ÄÇ°¤Ê¤¬¤é¡¢BIOS ¤Ë¥Þ¥·¥ó¾å¤Î RAM ¤Î\n"
-#~ "Àµ³Î¤ÊÎ̤ò¤­¤¯ÊýË¡¤ÏÅý°ì¤µ¤ì¤Æ¤¤¤Þ¤»¤ó¡£¤³¤Î¤¿¤á Linux ¤Ï¡¢RAM¤Î\n"
-#~ "Î̤òÀµ³Î¤Ë¸¡½Ð¤Ç¤­¤Ê¤¤¤«¤â¤·¤ì¤Þ¤»¤ó¡£¤³¤Î¾ì¹ç¡¢¤³¤³¤ÇÀµ³Î¤Ê RAM ¤Î\n"
-#~ "Î̤ò¤³¤³¤Ç»ØÄê¤Ç¤­¤Þ¤¹¡£¤Ê¤ª¡¢¸¡½Ð¤µ¤ì¤¿RAM¤È¼ÂºÝ¤ÎRAM¤¬ 2-4 MB ¤Û¤É\n"
-#~ "¤º¤ì¤Æ¤¤¤ë¤Î¤Ï¤Þ¤Ã¤¿¤¯ÌäÂê¤Ê¤¤¼«Á³¤Ê¤³¤È¤Ç¤¹¡£"
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO ¤ÏSPARCÍѤΥ֡¼¥È¥í¡¼¥À¤Ç¤¹¡£¥³¥ó¥Ô¥å¡¼¥¿¾å¤ÎGNU/Linux\n"
-#~ "¤Ê¤É³Æ¼ïOS¤òµ¯Æ°¤Ç¤­¤Þ¤¹¡£\n"
-#~ "ÉáÄ̤ϡ¢¤³¤ì¤é¤ÎOS¤Ï¼«Æ°Åª¤Ë¤­¤Á¤ó¤È¸¡½Ð¤µ¤ì¤Æ¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Þ¤¹¡£\n"
-#~ "¤³¤ì¤¬¥À¥á¤Ê¤é¡¢¤³¤³¤Ç¼êÆ°¤Ç¥¨¥ó¥È¥ê¤òÄɲä·¤Þ¤·¤ç¤¦¡£¥Ñ¥é¥á¡¼¥¿¤ò\n"
-#~ "¤Þ¤Á¤¬¤¨¤Ê¤¤¤è¤¦Ãí°Õ¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¾¤ÎOS¤Ë¤Ï¾¤Î¿Í¤¬¥¢¥¯¥»¥¹¤Ç¤­¤Ê¤¤¤è¤¦¤Ë¤·¤¿¤¤¤³¤È¤â¤¢¤ê¤Þ¤¹¡£¤³¤Î\n"
-#~ "¾ì¹ç¤Ë¤Ï¤½¤ÎOS¤Î¥¨¥ó¥È¥ê¤òºï½ü¤·¤Æ¤ª¤­¤Þ¤·¤ç¤¦¡£¤¿¤À¤·¤³¤Î¾ì¹ç¤Ï¡¢\n"
-#~ "¤½¤ÎOS¤ò»È¤¦¤È¤­¤Ë¤Ïµ¯Æ°¥Ç¥£¥¹¥¯¤¬Íפê¤Þ¤¹¤è¡ª"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO ¤Î¼çÍ×¥ª¥×¥·¥ç¥ó¤Ï°Ê²¼¤Î¤È¤ª¤ê¤Ç¤¹:\n"
-#~ "  - ¥Ö¡¼¥È¥í¡¼¥À¤ÎƳÆþ: GNU/Linux ¤òµ¯Æ°¤¹¤ë¤Î¤ËɬÍפȤʤë¾ðÊó¤òÃÖ¤¯¾ì½ê"
-#~ "¤ò\n"
-#~ "Æþ¤ì¤Æ¤¯¤À¤µ¤¤¡£¤Ê¤Ë¤ò¤¹¤ì¤Ð¤¤¤¤¤«¤Ï¤Ã¤­¤ê¤Èʬ¤«¤é¤Ê¤¤¾ì¹ç¤Ï¡¢\n"
-#~ "¡Ö¥É¥é¥¤¥Ö¤ÎºÇ½é¤Î¥»¥¯¥¿(MBR)¡×¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥Ç¥Õ¥©¥ë¥È¥¤¥á¡¼¥¸µ¯Æ°¤ÎÂÔ¤Á»þ´Ö: ¥Ö¡¼¥È¥í¡¼¥À¤¬ºÇ½é¤Î¥¤¥á¡¼¥¸¤òµ¯Æ°\n"
-#~ "¤¹¤ë¤Þ¤Ç¤ÎÂÔ¤Á»þ´Ö¤ò1/10ÉÃñ°Ì¤Ç»ØÄꤷ¤Þ¤¹¡£¤³¤ì¤Ï¡¢¥­¡¼¥Ü¡¼¥É¤¬Í­¸ú¤Ë\n"
-#~ "¤Ê¤Ã¤Æ¤¹¤°¤Ë¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤«¤éµ¯Æ°¤¹¤ë¥·¥¹¥Æ¥à¤Ê¤É¤ÇÊØÍø¤Ç¤¹¡£¤³¤Î\n"
-#~ "¡ÖÂÔ¤Á»þ´Ö¡×¤¬Ìµµ­Æþ¤À¤Ã¤¿¤ê¥¼¥í¤À¤Ã¤¿¤ê¤·¤¿¤é¡¢¥Ö¡¼¥È¥í¡¼¥À¤ÏÂÔ¤Á¤Þ¤»¤ó¡£"
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "¤Ç¤ÏX¥¦¥£¥ó¥É¥¦¥·¥¹¥Æ¥à¤ÎÀßÄê¤ò¤·¤Þ¤·¤ç¤¦¡£¤³¤ì¤ÏGNU/Linux GUI (¥°¥é¥Õ¥£¥«"
-#~ "¥ë\n"
-#~ "¥æ¡¼¥¶¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¡Ë¤Î³Ë¿´Éôʬ¤Ç¤¹¡£¤³¤Î¤¿¤á¤Ë¤Ï¤Þ¤º¡¢¥Ó¥Ç¥ª¥«¡¼¥É¤È\n"
-#~ "¥â¥Ë¥¿¤ÎÀßÄê¤ò¤·¤Þ¤¹¡£¤¬¡¢ÅÓÃæ¡¢¤Û¤È¤ó¤É¤Ï¼«Æ°²½¤µ¤ì¤Æ¤¤¤ë¤Î¤Ç¡¢Ä̾ï¤Ê¤é\n"
-#~ "ñ¤Ë¡¢·ë²Ì¤ò¸«¤Æ¤½¤ÎÀßÄê¤ò¾µÇ§¤¹¤ë¤À¤±¤Ç¤¹¤ß¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "ÀßÄ꤬½ª¤ï¤Ã¤¿¤é¡¢X¤¬¤¿¤Á¤¢¤¬¤ê¤Þ¤¹¡Ê¤¢¤Ê¤¿¤¬¤½¤¦¤¹¤ë¤Ê¤ÈDrakX¤ËÌ¿Îᤷ¤Ê"
-#~ "¤¤\n"
-#~ "¸Â¤ê¡Ë¡£¤³¤ì¤ÇÀßÄ꤬Àµ¤·¤¤¤«¤ò³Îǧ¤Ç¤­¤Þ¤¹¡£Àµ¤·¤¯¤Ê¤±¤ì¤Ð¡¢Ìá¤Ã¤Æ¤­¤Æ\n"
-#~ "¤ä¤ê¤Ê¤ª¤»¤Þ¤¹¡£¤³¤ì¤Ï²¿Å٤Ǥ⹥¤­¤Ê¤À¤±¤Ç¤­¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "X ¤ÎÀßÄ꤬¤ª¤«¤·¤±¤ì¤Ð¡¢¤³¤Î¥ª¥×¥·¥ç¥ó¤ò»È¤Ã¤Æ¡¢X¥¦¥£¥ó¥É¥¦¥·¥¹¥Æ¥à¤ò\n"
-#~ "Àµ¤·¤¯ÀßÄꤷľ¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "¥°¥é¥Õ¥£¥«¥ë¡¦¥í¥°¥¤¥ó¤¬¹¥¤­¤Ê¤é¡¢¡Ö¤Ï¤¤¡×¤òÁª¤Ó¤Þ¤¹¡£¤½¤¦¤Ç¤Ê¤±¤ì¤Ð\n"
-#~ "¡Ö¤¤¤¤¤¨¡×¤òÁª¤Ó¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "¥Þ¥·¥ó¤Î¥»¥­¥å¥ê¥Æ¥£¤Î¥ì¥Ù¥ë¤òÁª¤Ù¤Þ¤¹¡£¾Ü¤·¤¤ÀâÌÀ¤Ï¥Þ¥Ë¥å¥¢¥ë¤ò»²¾È¡£\n"
-#~ "´ðËÜŪ¤Ë¤Ï¡¢¤É¤ì¤òÁª¤Ù¤Ð¤¤¤¤¤«¤ï¤«¤é¤Ê¤±¤ì¤Ð¥Ç¥Õ¥©¥ë¥È¤Î¤Þ¤Þ¤Ë¤·¤Þ¤¹¡£\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "¥·¥¹¥Æ¥à¤òºÆµ¯Æ°¤·¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "ºÆµ¯Æ°¤·¤¿¤é¡¢¿·¤·¤¤ Mandrake Linux ¥·¥¹¥Æ¥à¤¬¼«Æ°Åª¤Ë¤¿¤Á¤¢¤¬¤ê¤Þ¤¹¡£\n"
-#~ "Ê̤ÎOS¤ò¤¿¤Á¤¢¤²¤¿¤¤¤È¤­¤Ë¤Ï¡¢ÄɲäÎÀâÌÀ¤òÆɤó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "linux¤ÎÊ£À½ÍѤˡ¢¼«Æ°¥¤¥ó¥¹¥È¡¼¥ë¥Ç¥£¥¹¥¯¤ò¤Ä¤¯¤ê¤Þ¤¹¤«¡©"
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "¥Á¥§¥³¡Ê¥×¥í¥°¥é¥Þ¡Ë"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "¥¹¥í¥Ð¥­¥¢¡Ê¥×¥í¥°¥é¥Þ¡Ë"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL¤ÎÀßÄê"
-
-#~ msgid "Europe"
-#~ msgstr "¥è¡¼¥í¥Ã¥Ñ"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remote queue"
-#~ msgstr "¥ê¥â¡¼¥È¥­¥å¡¼"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "¥ê¥â¡¼¥È¥­¥å¡¼Ì¾¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "¤³¤³¤Ç¤Ï¡¢¥¸¥ç¥Ö¤ò¥×¥ê¥ó¥¿¤ËÁ÷¤ëÁ°¤Ë¡¢Ç¤°Õ¤Î¥³¥Þ¥ó¥É¤Ë¥Ñ¥¤¥×¤¹¤ë¤è¤¦»ØÄê¤Ç"
-#~ "¤­¤Þ¤¹¡£"
-
-#~ msgid "Command line"
-#~ msgstr "¥³¥Þ¥ó¥É¥é¥¤¥ó"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "¥³¥Þ¥ó¥É¥é¥¤¥ó¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤¡ª"
-
-#~ msgid "Option $printer->{ARGS}[$i]{'comment'} must be an integer number!"
-#~ msgstr "Option $printer->{ARGS}[$i]{'comment'} ¤ÏÀµ¿ô¤Ë¤·¤Æ¤¯¤À¤µ¤¤!"
-
-#~ msgid "Option $printer->{ARGS}[$i]{'comment'} must be a number!"
-#~ msgstr "Option $printer->{ARGS}[$i]{'comment'} ¤Ï¿ô»ú¤Ë¤·¤Æ¤¯¤À¤µ¤¤!"
-
-#~ msgid "Option $printer->{ARGS}[$i]{'comment'} out of range!"
-#~ msgstr "Option $printer->{ARGS}[$i]{'comment'} ¤¬Èϰϳ°¤Ç¤¹!"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "¥ê¥â¡¼¥È CUPS ¥µ¡¼¥Ð¤Î¾ì¹ç¡¢¤³¤³¤Ç¤Ï¥×¥ê¥ó¥¿¤ÎÀßÄê¤ÏÉÔÍפǤ¹¡£\n"
-#~ "¥×¥ê¥ó¥¿¤Ï¼«Æ°¸¡½Ð¤µ¤ì¤Þ¤¹¡£¤¿¤À¤·¥µ¡¼¥Ð¤¬Ê̤Υͥåȥ¥¯¾å¤Ë\n"
-#~ "¤¢¤ë¤È¥À¥á¤Ç¤¹¡£¤³¤Î¤È¤­¤Ï¡¢CUPS¥µ¡¼¥Ð¤ÎIP¥¢¥É¥ì¥¹¤È¡¢É¬Íפʤé\n"
-#~ "¥Ý¡¼¥ÈÈÖ¹æ¤ò»ØÄꤷ¤Þ¤·¤ç¤¦¡£"
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "¥×¥ê¥ó¥¿¤Î̾Á°¤È¥³¥á¥ó¥È¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤"
-
-#~ msgid "Remove queue"
-#~ msgstr "¥­¥å¡¼¤Îºï½ü"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "ÀßÄê¥Õ¥¡¥¤¥ë¤ÎÆâÍƤ¬²ò¼á¤Ç¤­¤Þ¤»¤ó¡£"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "ÀßÄê¥Õ¥¡¥¤¥ë¤¬ÊѤǤ¹"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "ÁϤë¥×¥í¥Õ¥£¡¼¥ë̾:"
-
-#~ msgid "Adapter"
-#~ msgstr "¥¢¥À¥×¥¿"
-
-#~ msgid "Disable network"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤ò̵¸ú¤Ë¤¹¤ë"
-
-#~ msgid "Enable network"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤òÍ­¸ú¤Ë¤¹¤ë"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤Î´Æ»ë"
-
-#~ msgid "Settings"
-#~ msgstr "ÀßÄê"
-
-#~ msgid "Profile "
-#~ msgstr "¥×¥í¥¤¡¼¥ë "
-
-#~ msgid "Statistics"
-#~ msgstr "Åý·×"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Á÷¿®Â®ÅÙ¡§"
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "¼õ¿®Â®ÅÙ¡§"
-
-#~ msgid "Logs"
-#~ msgstr "¥í¥°"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ØÀܳ"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤«¤éÀÚÃÇ"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤«¤é¤ÎÀÚÃǤ˼ºÇÔ"
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤«¤é¤ÎÀÚÃÇ´°Î»"
-
-#~ msgid "Connection complete."
-#~ msgstr "Àܳ´°Î»"
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Àܳ¼ºÇÔ¡£\n"
-#~ "Mandrake ¥³¥ó¥È¥í¡¼¥ë¥»¥ó¥¿¡¼¤ÇÀßÄê¤ò³Îǧ¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid "Color configuration"
-#~ msgstr "¥«¥é¡¼¤ÎÀßÄê"
-
-#~ msgid "sent: "
-#~ msgstr "Á÷¿®ºÑ¤ß¡§"
-
-#~ msgid "received: "
-#~ msgstr "¼õ¿®ºÑ¤ß¡§"
-
-#~ msgid "average"
-#~ msgstr "Ê¿¶Ñ"
-
-#~ msgid "Connect"
-#~ msgstr "Àܳ"
-
-#~ msgid "Disconnect"
-#~ msgstr "ÀÚÃÇ"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "¤µ¤¢¡¢¥Þ¥¦¥¹¤ò¥Æ¥¹¥È¤·¤Æ¤ß¤Þ¤·¤ç¤¦¡¢¥Ü¥¿¥ó¤ä¥Û¥¤¡¼¥ë¤ò»È¤Ã¤Æ¤ß¤Æ¡¢\n"
-#~ "ÀßÄ꤬¤³¤ì¤Ç¤¤¤¤¤«¸«¤Æ¤¯¤À¤µ¤¤¡£¥À¥á¤Ê¤é¡Ö¥­¥ã¥ó¥»¥ë¡×¤ò²¡¤·¤Æ¡¢\n"
-#~ "¥É¥é¥¤¥Ð¤òÁª¤Óľ¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (¤Þ¤¿¤Ï ADSL) Àܳ"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "CUPS ¤Ç¥×¥ê¥ó¥¿¤ò¥¢¥¯¥»¥¹¤¹¤ë¤Ê¤é¡¢Ä¾ÀÜ URI ¤ò»ØÄê¤Ç¤­¤Þ¤¹¡£"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "ASCII¥Æ¥¹¥È¥Ú¡¼¥¸¤ò°õºþ¤·¤Æ¤ß¤ë"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "PostScript¥Æ¥¹¥È¥Ú¡¼¥¸¤ò°õºþ¤·¤Æ¤ß¤ë"
-
-#~ msgid "Paper Size"
-#~ msgstr "Íѻ極¥¤¥º"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "¥¸¥ç¥Ö¤Î¸å¤Ç¥Ú¡¼¥¸ÇӽФ·¤Þ¤¹¤«¡©"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint¥É¥é¥¤¥Ð¥ª¥×¥·¥ç¥ó"
-
-#~ msgid "Color depth options"
-#~ msgstr "¿§¿¼ÅÙ¥ª¥×¥·¥ç¥ó"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "¥Æ¥­¥¹¥È¤òPostScript¤Ç°õºþ¤·¤Þ¤¹¤«¡©"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "ʸ»ú¤Î¥¸¥ã¥®¡¼¤ò¤Ê¤ª¤·¤Þ¤¹¤«¡©"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "½ÐÎÏ¥Ú¡¼¥¸¤¢¤¿¤ê¤Î¥Ú¡¼¥¸¿ô"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "º¸±¦¤Î;Çò¤ò¥Ý¥¤¥ó¥È¿ô¡Ê1/72¥¤¥ó¥Á¡Ë¤Ç»ØÄê"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "¾å²¼¤Î;Çò¤ò¥Ý¥¤¥ó¥È¿ô¡Ê1/72¥¤¥ó¥Á¡Ë¤Ç»ØÄê"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "¤½¤Î¾ GhostScript¥ª¥×¥·¥ç¥ó"
-
-#~ msgid "Extra Text options"
-#~ msgstr "¤½¤Î¾¥Æ¥­¥¹¥È¥ª¥×¥·¥ç¥ó"
-
-#~ msgid "Reverse page order"
-#~ msgstr "ºÇ¸å¤Î¥Ú¡¼¥¸¤«¤é°õºþ"
-
-#~ msgid "CUPS starting"
-#~ msgstr "CUPS ³«»Ï"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "¥ê¥â¡¼¥È¥×¥ê¥ó¥¿¤ÎÀܳ¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "¥×¥ê¥ó¥¿¤Ï¤½¤ì¤¾¤ì̾Á°¤¬Íפê¤Þ¤¹¡Ê¤¿¤È¤¨¤Ðlp)¡£\n"
-#~ "¤Û¤«¤Ë¤â¡¢¥×¥ê¥ó¥¿¤Î¼ïÎà¤ä¥Þ¥·¥ó¤Ø¤Î¤Ä¤Ê¤¬¤ê¤«¤¿¤Ê¤É¤Î¥Ñ¥é¥á¡¼¥¿¤¬\n"
-#~ "ÀßÄê¤Ç¤­¤Þ¤¹¡£¤³¤Î¥×¥ê¥ó¥¿¤Ï¤Ê¤ó¤È¤¤¤¦Ì¾Á°¤Ë¤·¤Þ¤¹¤«¡© ¤½¤·¤Æ¥Þ¥·¥ó¤È¤Ï¤É"
-#~ "¤¦¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤Þ¤¹¤«¡©"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "¤¢¤é¤æ¤ë¥×¥ê¥ó¥È¥­¥å¡¼(¥×¥ê¥ó¥È¥¸¥ç¥Ö¤¬´ÉÍý¤µ¤ì¤ë)¤Ï̾Á°(¤¿¤¤¤Æ¤¤¤Ï\n"
-#~ " lp)¤È¤½¤ì¤Ë´ØÏ¢¤·¤Æ¤¤¤ë¥¹¥×¡¼¥ë¥Ç¥£¥ì¥¯¥È¥ê¤¬É¬ÍפǤ¹¡£¤³¤Î¥­¥å¡¼¤Ç\n"
-#~ "»È¤¦Ì¾Á°¤È¥Ç¥£¥ì¥¯¥È¥ê¤Ï²¿¤Ë¤·¤Þ¤¹¤«¡©\n"
-#~ "¤Þ¤¿¥×¥ê¥ó¥¿¤Ï¤É¤¦Àܳ¤µ¤ì¤Æ¤¤¤Þ¤¹¤«¡©"
-
-#~ msgid "Name of queue"
-#~ msgstr "¥­¥å¡¼¤Î̾Á°¡§"
-
-#~ msgid "Spool directory"
-#~ msgstr "¥¹¥×¡¼¥ë¤Î¥Ç¥£¥ì¥¯¥È¥ê¡§"
-
-#~ msgid "Disable"
-#~ msgstr "̵¸ú¤Ë"
-
-#~ msgid "Enable"
-#~ msgstr "Í­¸ú¤Ë"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "¹â¥»¥­¥å¥ê¥Æ¥£¥·¥¹¥Æ¥à¤Ë¤·¤¿¤±¤ì¤Ð¡¢¡Ö¥·¥ã¥É¥¦¥Õ¥¡¥¤¥ë¤ò»È¤¦¡×¤È\n"
-#~ "¡ÖMD5 ¥Ñ¥¹¥ï¡¼¥É¤ò»È¤¦¡×¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "¤â¤·¥Í¥Ã¥È¥ï¡¼¥¯¤Ç NIS ¤ò»È¤Ã¤Æ¤¤¤ë¤Ê¤é¡ÖNIS ¤ò»È¤¦¡×¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "¤ï¤«¤é¤Ê¤±¤ì¤Ð¥Í¥Ã¥È¥ï¡¼¥¯´ÉÍý¼Ô¤Ë¤­¤¤¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid "yellow pages"
-#~ msgstr "¥¤¥¨¥í¡¼¥Ú¡¼¥¸"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "¥×¥í¥Ð¥¤¥À¤Î dns 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "¥×¥í¥Ð¥¤¥À¤Î dns 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "¤É¤Î¤è¤¦¤Ë¤·¤Æ¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ¤·¤Þ¤¹¤«?"
-
-#~ msgid "cannot fork: "
-#~ msgstr "¥Õ¥©¡¼¥¯ÉÔ²Äǽ¡§"
-
-#~ msgid "Configure..."
-#~ msgstr "ÀßÄêÃæ..."
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Áª¤Ð¤ì¤¿¥µ¥¤¥º¡§%d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Àܳ¤ò³«»Ï..."
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "¤³¤Îµ¯Æ°¥¹¥¯¥ê¥×¥È¤ÏUSB¥Þ¥¦¥¹ÍѤΥ⥸¥å¡¼¥ë¤ò¥í¡¼¥É¤·¤Þ¤¹¡£"
-
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Lilo ¤ÎÀßÄê/Grub"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "µ¯Æ°Êý¼°¤ÎÀßÄê"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "¤µ¤¢¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤ÎÀßÄ꤬½ª¤ï¤ê¤Þ¤·¤¿¡£¤Û¤«¤Î¥Þ¥·¥ó¤¬\n"
-#~ "¤³¤Î¥Þ¥·¥ó·Ðͳ¤Ç¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ¤¹¤ë¤è¤¦¤ËÀßÄê¤Ç¤­¤Þ¤¹\n"
-#~ "Ãí¡§¥í¡¼¥«¥ë¥¨¥ê¥¢¥Í¥Ã¥È¥ï¡¼¥¯ (LAN) ¤ò¤Ä¤¯¤ë¤Ë¤Ï¡¢ÀìÍѤΥͥåȥ¥¯¥¢¥À"
-#~ "¥×¥¿¤¬Íפê¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤Î¶¦Í­¤òÀßÄꤷ¤Þ¤¹¤«¡©\n"
-
-#~ msgid "Welcome to the Internet Connection Sharing utility!"
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¶¦Í­¥æ¡¼¥Æ¥£¥ê¥Æ¥£¤Ø¤è¤¦¤³¤½¡ª"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "°Í¸´Ø·¸¤Î¼«Æ°²ò·è"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "LILO/GRUB ¤ÎÀßÄê"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "µ¯Æ°¥Ç¥£¥¹¥¯ºîÀ®"
-
-#~ msgid "Format floppy"
-#~ msgstr "¥Õ¥í¥Ã¥Ô¡¼¤ò¥Õ¥©¡¼¥Þ¥Ã¥È"
-
-#~ msgid "Choice"
-#~ msgstr "ÁªÂò"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "¿åÊ¿¤Ç¤­¤ì¤¤¤Ë¸«¤¨¤ëaurora"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "½¾Íè·¿¤Î¿âľ¤Ê aurora"
-
-#~ msgid "gMonitor"
-#~ msgstr "g¥â¥Ë¥¿"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "¤Ç¤Ï¤½¤Î¾¤Î¥ª¥×¥·¥ç¥ó¤ò¤¤¤¯¤Ä¤«ÀßÄꤷ¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "  - ¥Ï¡¼¥É¥Ç¥£¥¹¥¯ºÇŬ²½¤ò¤¹¤ë: ¤³¤Î¥ª¥×¥·¥ç¥ó¤Ï¡¢¥Ï¡¼¥É¥Ç¥£¥¹¥¯À­Ç½\n"
-#~ "    ¤ò²þÁ±¤·¤Æ¤¯¤ì¤Þ¤¹¤¬¡¢¹âÅ٤ʥ桼¥¶ÀìÍѤǤ¹¡£°ìÉô¤Î¥Á¥Ã¥×¥»¥Ã¥È¤À¤È\n"
-#~ "    ¥Ç¥£¥¹¥¯¾å¤Î¥Ç¡¼¥¿¤¬²õ¤ì¤Þ¤¹¡£¥«¡¼¥Í¥ë¤Ç¤â¡¢º¤¤Ã¤¿¥Á¥Ã¥×¥»¥Ã¥È¤ä\n"
-#~ "    ¥É¥é¥¤¥Ö¤Î¥Ö¥é¥Ã¥¯¥ê¥¹¥È¤Ï»ý¤Ã¤Æ¤¤¤Þ¤¹¤¬¡¢Äˤ¤Ìܤˤ¢¤¤¤¿¤¯¤Ê¤±¤ì¤Ð\n"
-#~ "    Èò¤±¤¿¤Û¤¦¤¬ÌµÆñ¤Ç¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥»¥­¥å¥ê¥Æ¥£¥ì¥Ù¥ë¤ÎÁªÂò: ¥·¥¹¥Æ¥à¤Î¥»¥­¥å¥ê¥Æ¥£¥ì¥Ù¥ë¤òÁª¤Ù¤Þ¤¹¡£\n"
-#~ "    ¾Ü¤·¤¯¤Ï¥Þ¥Ë¥å¥¢¥ë¤ò»²¾È¤·¤Æ¤¯¤À¤µ¤¤¡£´ðËÜŪ¤Ë¤Ï¡¢¤è¤¯¤ï¤«¤é¤Ê¤±¤ì\n"
-#~ "    ¤Ð¥Ç¥Õ¥©¥ë¥È¤Î¤Þ¤Þ¤Ç¤¤¤­¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ɬÍפʤéÀµ³Î¤ÊRAM¥µ¥¤¥º: »ÄÇ°¤Ê¤¬¤é¤¤¤Þ¤Î¥Ñ¥½¥³¥ó¤ÎÀ¤³¦¤Ç¤Ï¡¢BIOS¤Ë\n"
-#~ "    ¥·¥¹¥Æ¥à¾å¤ÎRAM¤ÎÎ̤ˤĤ¤¤Æ¤Þ¤È¤â¤Ëʹ¤¯ÊýË¡¤¬¤¢¤ê¤Þ¤»¤ó¡£¤³¤Î·ë²Ì¡¢\n"
-#~ "    Linux¤Ï¥Þ¥·¥ó¾å¤ÎRAM¤ò¤­¤Á¤ó¤È¸¡½Ð¤Ç¤­¤Ê¤¤¤³¤È¤¬¤¢¤ê¤Þ¤¹¡£¤³¤Î¾ì¹ç\n"
-#~ "    ¤Ë¤Ï¡¢Àµ¤·¤¤Î̤ò»ØÄꤷ¤Þ¤¹¡£\n"
-#~ "    Ãí°Õ¡§ 2 or 4 MB ¤¯¤é¤¤¤Î¤º¤ì¤Ïµ¤¤Ë¤·¤Ê¤¯¤ÆÂç¾æÉפǤ¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥ê¥à¡¼¥Ð¥Ö¥ë¥á¥Ç¥£¥¢¤Î¼«Æ°¥Þ¥¦¥ó¥È: ¥ê¥à¡¼¥Ð¥Ö¥ë¥É¥é¥¤¥Ö¡ÊCD-ROM¤ä\n"
-#~ "    ¥Õ¥í¥Ã¥Ô¡¼¡¢ZIP¤Ê¤É¡Ë¤ò¡Ömount¡×¤ä¡Öumount¡×¥³¥Þ¥ó¥É¤Ç¼êÆ°¥Þ¥¦¥ó¥È\n"
-#~ "    ¤¹¤ë¤Î¤¬ÌÌÅݤʤ顢¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤Ó¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "* µ¯Æ°¤Î¤¿¤Ó¤Ë¡Ö/tmp¡×¤ò¶õ¤Ë: ¤â¤·¥·¥¹¥Æ¥à¤òµ¯Æ°¤¹¤ë¤¿¤Ó¤Ë¡Ö/tmp¡×¤Î\n"
-#~ "¥Õ¥¡¥¤¥ë¤ä¥Ç¥£¥ì¥¯¥È¥ê¤ò¾Ãµî¤¹¤ë¤Ë¤Ï¡¢¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - µ¯Æ°»þ¤ËNum Lock¤ò¥ª¥ó¤Ë¤¹¤ë: µ¯Æ°»þ¤ËNumber Lock¤ò¥ª¥ó¤Ë¤·¤¿¤±¤ì¤Ð\n"
-#~ "    ¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤Ó¤Þ¤¹¡ÊÃí°Õ¡§¥é¥Ã¥×¥È¥Ã¥×¤Ç¤Ï¡¢¤³¤Î¥ª¥×¥·¥ç¥ó¤ò\n"
-#~ "    ¥ª¥ó¤Ë¤·¤Æ¤Ï¤¤¤±¤Þ¤»¤ó¡£¤Þ¤¿¡¢X¥¦¥£¥ó¥É¥¦¤Ç¤ÏNum Lock¤Ï»È¤¨¤Ê¤¤¤³\n"
-#~ "    ¤È¤¬¤¢¤ê¤Þ¤¹¡Ë¡£"
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr "¤´¤á¤ó¤Ê¤µ¤¤¡¢¥á¡¼¥ë¤ÎÀßÄê¤Ï¤Þ¤À¤Ç¤­¤Þ¤»¤ó¡£¤´ÍƼϤò¡£"
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄꥦ¥£¥¶¡¼¥É¤Ø¤è¤¦¤³¤½¡£\n"
-#~ "¤É¤Î¥³¥ó¥Ý¡¼¥Í¥ó¥È¤òÀßÄꤷ¤¿¤¤¤Ç¤¹¤«?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È/¥Í¥Ã¥È¥ï¡¼¥¯¤Ø¤Î¥¢¥¯¥»¥¹"
-
-#~ msgid "Firewall Configuration Wizard"
-#~ msgstr "¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ëÀßÄꥦ¥£¥¶¡¼¥É"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "¤½¤Î¾¤â¤í¤â¤í"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "¤½¤Î¾¤Î¼ÁÌä"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "¥¹¡¼¥Ñ¡¼¥Þ¥¦¥ó¥È¤Ï¹â¤¤¥»¥­¥å¥ê¥Æ¥£¥ì¥Ù¥ë¤Ç¤Ï»È¤¨¤Þ¤»¤ó"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Ãí°Õ: ¤³¤Î¥»¥­¥å¥ê¥Æ¥£¥ì¥Ù¥ë¤Ç¤Ï¡¢¥³¥ó¥½¡¼¥ë¤Ç¤Î¥ë¡¼¥È¥í¥°¥¤¥ó¤Ï\n"
-#~ "µö²Ä¤µ¤ì¤Þ¤»¤ó¡ª\n"
-#~ "root ¤Ë¤Ê¤ê¤¿¤¤¤È¤­¤Ï¡¢¥æ¡¼¥¶¤Ç¥í¥°¥¤¥ó¤·¤Æ¡Ösu¡×¤ò»È¤¦É¬Íפ¬¤¢¤ê¤Þ¤¹¡£\n"
-#~ "°ìÈÌŪ¤Ë¤Ï¡¢¥µ¡¼¥Ð¤ò½ü¤¯²¿¤«¤¬¥Þ¥·¥ó¤ò»È¤¨¤ë¤È´üÂÔ¤µ¤»¤Ê¤¤¤¿¤á¤Ç¤¹¡£\n"
-#~ "·Ù¹ð¤·¤Þ¤·¤¿¤è¡£"
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Ãí°Õ¡¢numlock ¤òÍ­¸ú¤Ë¤¹¤ë¤È¡¢¤¤¤¯¤Ä¤«¤Î¥­¡¼¥¹¥È¥í¡¼¥¯¤ÏÉáÄ̤Îʸ»ú\n"
-#~ "¤Î¤«¤ï¤ê¤Ë¿ô»ú¤òÊÖ¤·¤Þ¤¹(Î㡧¡Öp¡×¤òÂǤĤȡÖ6¡×¤òÊÖ¤·¤Þ¤¹)"
-
-#~ msgid "not connected"
-#~ msgstr "Àܳ¤µ¤ì¤Æ¤¤¤Þ¤»¤ó"
-
-#~ msgid "Actions"
-#~ msgstr "¤Õ¤ë¤Þ¤¤"
-
-#~ msgid "Scientific applications"
-#~ msgstr "²Ê³Ø¥¢¥×¥ê¥±¡¼¥·¥ç¥ó"
-
-#~ msgid "toot"
-#~ msgstr "toot"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "¥µ¡¼¥Ð¡¢¥Õ¥¡¥¤¥ë/°õºþ/Samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "¥µ¡¼¥Ð¡¢DNS/DHCP"
-
-#~ msgid "First DNS Server"
-#~ msgstr "¥Õ¥¡¡¼¥¹¥È DNS ¥µ¡¼¥Ð"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "¥»¥«¥ó¥É DNS ¥µ¡¼¥Ð"
-
-#~ msgid "using module"
-#~ msgstr "¥â¥¸¥å¡¼¥ë¤ò»ÈÍÑ"
-
-#~ msgid "Development, Database"
-#~ msgstr "¥Ç¡¼¥¿¥Ù¡¼¥¹³«È¯ÍÑ"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "³«È¯¡¢Åý¹ç´Ä¶­"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "³«È¯ÍÑ¡¢É¸½à¥Ä¡¼¥ë"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "·Ù¹ð:\n"
-#~ "¼Â¹ÔÃæ¤ËÊѹ¹¤òŬÍѤ¹¤ë¤È¡¢X ´Ä¶­¤¬¥¯¥é¥Ã¥·¥å¤¹¤ë¤«¤â¤·¤ì¤Þ¤»¤ó¡£"
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "³¤±¤ë¤Ê¤é¡¢%s ´Ä¶­¤ò¥·¥ã¥Ã¥È¥À¥¦¥ó¤·¤Þ¤¹"
-
-#~ msgid "eth$_"
-#~ msgstr "eth$_"
-
-#~ msgid "loopback"
-#~ msgstr "¥ë¡¼¥×¥Ð¥Ã¥¯"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "¤É¤Î¥Ö¡¼¥È¥í¡¼¥À¤ò»È¤¤¤Þ¤¹¤«"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "ƳÆþÀßÄê¥Õ¥í¥Ã¥Ô"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "¥â¥Ç¥à¤ò¸¡º÷¤·¤Þ¤¹¤«¡©"
-
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "ISDN Àܳ¤ÎÀßÄê"
-
-#~ msgid "Configure a cable connection"
-#~ msgstr "¥±¡¼¥Ö¥ë¥Æ¥ì¥ÓÀܳ¤ÎÀßÄê"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤ò̵¸ú¤Ë¤¹¤ë"
-
-#~ msgid "Configure local network"
-#~ msgstr "LAN ÀßÄê"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳÀßÄê¡¿LAN ÀßÄê"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "¥í¡¼¥«¥ë¥Í¥Ã¥È¥ï¡¼¥¯¤ÏÀßÄêºÑ¤ß¤Ç¤¹¡£\n"
-#~ "°Ê²¼¤ò¤·¤¿¤¤¤Ç¤¹¤«¡§"
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "¥¦¥£¥¶¡¼¥É¤ò»È¤Ã¤ÆÀßÄêÃæ..."
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "²èÁüÁàºî"
-
-#~ msgid "Multimedia"
-#~ msgstr "¥Þ¥ë¥Á¥á¥Ç¥£¥¢"
-
-#~ msgid "Sciences"
-#~ msgstr "²Ê³Ø"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "xchat, licq, gaim¤Ê¤É¤Î¥Á¥ã¥Ã¥ÈÍÑ¥½¥Õ¥È (IRC ¤ä¥¤¥ó¥¹¥¿¥ó¥È¥á¥Ã¥»¡¼¥¸) ¤È"
-#~ "¥Õ¥¡¥¤¥ëžÁ÷¥Ä¡¼¥ë"
-
-#~ msgid "Communication facilities"
-#~ msgstr "ÄÌ¿®´ØÏ¢"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¥Ä¡¼¥ë"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "¥Ç¡¼¥¿¥Ù¡¼¥¹¥¯¥é¥¤¥¢¥ó¥È¤È¥µ¡¼¥Ð (mysql, postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "³«È¯ÍÑ C/C++"
-
-#~ msgid "Configure timezone"
-#~ msgstr "¥¿¥¤¥à¥¾¡¼¥óÀßÄê"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥À¥×¥¿ 1¡Êeth0¡Ë"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "¡Ê¥Ç¡¼¥¿¤¬²õ¤ì¤ë¤ª¤½¤ì¤¬¤¢¤ê¤Þ¤¹¡Ë"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤òºÇŬ²½¤·¤Þ¤¹¤«¡©"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "µ¯Æ°»þ¤Ënum lock¤ò¥ª¥ó¤Ë¤¹¤ë"
-
-#~ msgid "Confirm Password"
-#~ msgstr "¥Ñ¥¹¥ï¡¼¥É¤ÎÀßÄê"
-
-#~ msgid "DNS server:"
-#~ msgstr "DNS ¥µ¡¼¥Ð:"
-
-#~ msgid "Gateway device:"
-#~ msgstr "¥²¡¼¥È¥¦¥§¥¤¥Ç¥Ð¥¤¥¹:"
-
-#~ msgid "default"
-#~ msgstr "¥Ç¥Õ¥©¥ë¥È"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "¥·¥¹¥Æ¥à¤Î»È¤¤Êý¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¥µ¥¤¥º¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "diskdrake¤ò»È¤¦"
-
-#~ msgid "Customized"
-#~ msgstr "¥«¥¹¥¿¥Þ¥¤¥º"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "¤¢¤Ê¤¿¡¢ËÜÅö¤Ë¥Û¥ó¥È¤Î¥¨¥­¥¹¥Ñ¡¼¥È¤Ç¤·¤ç¤¦¤Í¤§¡£\n"
-#~ "¤³¤ì¤òÁª¤Ö¤È¡¢¶¯ÎϤʤÀ¤±¤Ë¤¨¤é¤¯´í¸±¤Ê¤Þ¤Í¤¬¤Ç¤­¤Á¤ã¤¤¤Þ¤¹¤è¡£\n"
-#~ "¡Ö¥Ñ¥¹¥ï¡¼¥É¤ò¥·¥ã¥É¥¦¤Ë¤·¤Þ¤¹¤«¡×¤È¤¤¤Ã¤¿¼ÁÌä¤ò¿Ö¤«¤ì¤Þ¤¹¡£ ¤³¤Î¤è¤¦¤Ê¼Á"
-#~ "Ìä¤Ë¥Û¥ó¥È¤ËÅú¤¨¤é¤ì¤ë¤ó¤Ç¤¹¤«¡£"
-
-#~ msgid "Use shadow file"
-#~ msgstr "¥·¥ã¥É¥¦¥Õ¥¡¥¤¥ë¤ò»È¤¦"
-
-#~ msgid "shadow"
-#~ msgstr "¥·¥ã¥É¥¦"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "MD5 ¥Ñ¥¹¥ï¡¼¥É¤ò»È¤¦"
-
-#~ msgid "Search"
-#~ msgstr "¸¡º÷"
-
-#~ msgid "Package"
-#~ msgstr "¥Ñ¥Ã¥±¡¼¥¸"
-
-#~ msgid "Text"
-#~ msgstr "¥Æ¥­¥¹¥È"
-
-#~ msgid "Tree"
-#~ msgstr "¥Ä¥ê¡¼"
-
-#~ msgid "Sort by"
-#~ msgstr "°Ê²¼¤Î¥­¡¼¤Ç¥½¡¼¥È¡§"
-
-#~ msgid "Category"
-#~ msgstr "¼ïÎà"
-
-#~ msgid "See"
-#~ msgstr "°Ê²¼¤ò»²¾È¡§"
-
-#~ msgid "Installed packages"
-#~ msgstr "¥¤¥ó¥¹¥È¡¼¥ëºÑ¤ß¤Î¥Ñ¥Ã¥±¡¼¥¸"
-
-#~ msgid "Available packages"
-#~ msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤·¤Æ¤¤¤Ê¤¤¥Ñ¥Ã¥±¡¼¥¸"
-
-#~ msgid "Show only leaves"
-#~ msgstr "¾ÜºÙÉôʬ¤À¤±É½¼¨"
-
-#~ msgid "Expand all"
-#~ msgstr "¥Ä¥ê¡¼¤ò´°Á´¤Ë¤Î¤Ð¤·¤­¤ë"
-
-#~ msgid "Collapse all"
-#~ msgstr "¥Ä¥ê¡¼¤ò´°Á´¤Ë½Ì¤á¤ë"
-
-#~ msgid "Add location of packages"
-#~ msgstr "¥Ñ¥Ã¥±¡¼¥¸¤Î°ÌÃÖ¤òÄɲÃɽ¼¨"
-
-#~ msgid "Update location"
-#~ msgstr "¥¢¥Ã¥×¥Ç¡¼¥È¤¹¤ë°ÌÃÖ"
-
-#~ msgid "Find Package"
-#~ msgstr "¥Ñ¥Ã¥±¡¼¥¸¤Î¸¡º÷"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "°Ê²¼¤Î¥Õ¥¡¥¤¥ë¤ò´Þ¤à¥Ñ¥Ã¥±¡¼¥¸¤Î¸¡º÷¡§"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "¥¤¥ó¥¹¥È¡¼¥ëºÑ¤ß¤È̤¥¤¥ó¥¹¥È¡¼¥ë¤òÀÚ¤êÂؤ¨"
-
-#~ msgid "Choose package to install"
-#~ msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤¤¥Ñ¥Ã¥±¡¼¥¸¤ÎÁªÂò"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "¥Ñ¥Ã¥±¡¼¥¸¤Î°Í¸´Ø·¸¤òÄ´¤Ù¤Æ¤¤¤Þ¤¹"
-
-#~ msgid "Wait"
-#~ msgstr "¾¯¡¹¤ªÂÔ¤Á¤ò"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "°Ê²¼¤Î¥Ñ¥Ã¥±¡¼¥¸¤Ï¥¢¥ó¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤­¤Þ¤»¤ó"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "¥Ñ¥Ã¥±¡¼¥¸¤ò¤Î¥¢¥ó¥¤¥ó¥¹¥È¡¼¥ë¤·¤Æ¤¤¤Þ¤¹"
-
-#~ msgid "Regexp"
-#~ msgstr "Àµµ¬É½¸½"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "¤É¤Î¥Ñ¥Ã¥±¡¼¥¸¤ò¤µ¤¬¤·¤Æ¤¤¤Þ¤¹¤«"
-
-#~ msgid "%s not found"
-#~ msgstr "%s ¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó"
-
-#~ msgid "No match"
-#~ msgstr "°ìÃפ¹¤ë¤â¤Î¤¬¤¢¤ê¤Þ¤»¤ó"
-
-#~ msgid "No more match"
-#~ msgstr "¤³¤ì°Ê¾å¤Ï¤ß¤Ä¤«¤ê¤Þ¤»¤ó"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake ¤Ï¸½ºß¡¢¥á¥â¥êÉÔ­¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£\n"
-#~ "°ì²órpmdrake¤ò¤¿¤Á¤¢¤²¤Ê¤ª¤·¤Æ¡¢¥Õ¥¡¥¤¥ë¤Î¸¡º÷¤ò³¤±¤Þ¤¹¤Í"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "¤É¤Î¥Õ¥¡¥¤¥ë¤ò¤µ¤¬¤·¤Æ¤¤¤Þ¤¹¤«"
-
-#~ msgid "What are looking for?"
-#~ msgstr "¤Ê¤Ë¤ò¤µ¤¬¤·¤Æ¤¤¤Þ¤¹¤«"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "̾Á°¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤¡ÊÎ㡧¡Ö¥¨¥­¥¹¥È¥é¡×¡Ö¾¦ÍѡסË"
-
-#~ msgid "Directory"
-#~ msgstr "¥Ç¥£¥ì¥¯¥È¥ê"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "CDROM¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó¡Ê/mnt/cdrom¤Ë¤Ê¤Ë¤â¤¢¤ê¤Þ¤»¤ó¡Ë"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "RPM¥Ñ¥Ã¥±¡¼¥¸¤Î¤¢¤ë¥Ç¥£¥ì¥¯¥È¥ê¤ÎURL"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "FTP ¤È HTTP¤Ë¤Ä¤¤¤Æ¤Ï¡¢hdlist¤Î°ÌÃÖ¤ò»ØÄꤷ¤Ê¤¯¤Æ¤Ï¤Ê¤ê¤Þ¤»¤ó¡£\n"
-#~ "¾å¤ÎURL¤È¤ÎÁêÂаÌÃ֤ǻØÄꤷ¤Þ¤¹"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "°Ê²¼¤Î¾ðÊó¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s ¤Ï¤¹¤Ç¤Ë»È¤ï¤ì¤Æ¤¤¤Þ¤¹"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "RPM¤Î¥Ù¡¼¥¹¤ò¹¹¿·Ãæ"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "¥¨¥ó¥È¥ê %s ¤ò¾Ã¤·¤Þ¤¹"
-
-#~ msgid "Finding leaves"
-#~ msgstr "¥Ä¥ê¡¼¤Î¾ÜºÙ¤ò¸¡º÷Ãæ"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "¥Ä¥ê¡¼¤Î¾ÜºÙ¤ò¸«¤Ä¤±¤ë¤Î¤Ï»þ´Ö¤¬¤«¤«¤ê¤Þ¤¹"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "ISDN¥«¡¼¥É¤ò¤ß¤Ä¤±¤Þ¤·¤¿:\n"
-
-#~ msgid "France"
-#~ msgstr "¥Õ¥é¥ó¥¹"
-
-#~ msgid "Other countries"
-#~ msgstr "¾¤Î¹ñ"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "¤¢¤Ê¤¿¤¬¤¤¤ë¤Î¤Ï¤É¤Î¹ñ¤Ç¤¹¤«¡©"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Alcatel¥â¥Ç¥à"
-
-#~ msgid "ECI modem"
-#~ msgstr "ECI ¥â¥Ç¥à"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "¤â¤·adsl¥â¥Ç¥à¤¬alcatelÀ½¤Ê¤é¡¢alcatel¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£¤½¤¦¤Ç¤Ê¤±¤ì¤Ð\n"
-#~ "ECI ¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "pppoe¤ò»È¤ï¤Ê¤¤"
-
-#~ msgid "mandatory"
-#~ msgstr "¶¯À©"
-
-#~ msgid "interesting"
-#~ msgstr "ÌÌÇò¤¤"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (½ÅÍ×)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (¤È¤Æ¤âÁ±¤¤)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (Á±¤¤)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "¥Þ¥¦¥¹¤Ï¤É¤Î¥·¥ê¥¢¥ë¥Ý¡¼¥È¤Ë¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤Þ¤¹¤«¡©"
-
-#~ msgid "Czech"
-#~ msgstr "¥Á¥§¥³"
-
-#~ msgid "Slovakian"
-#~ msgstr "¥¹¥í¥Ð¥­¥¢"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "ipchains RPM ¤ò urpmi ¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤­¤Þ¤»¤ó¡£"
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "dhcp RPM ¤ò urpmi ¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤­¤Þ¤»¤ó¡£"
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "linuxconf RPM ¤ò urpmi ¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤­¤Þ¤»¤ó¡£"
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "bind RPM ¤ò urpmi ¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤­¤Þ¤»¤ó¡£"
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "caching-nameserver RPM ¤ò urpmi ¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤­¤Þ¤»¤ó¡£"
-
-#~ msgid ""
-#~ "The system is now connected to Internet! Congratulation.\n"
-#~ "Feel free to launch draknet at any time to setup your connection.\n"
-#~ msgstr ""
-#~ "¥Þ¥·¥ó¤Ï̵»ö¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ¤µ¤ì¤Þ¤·¤¿¡£¤ª¤á¤Ç¤È¤¦¡ª\n"
-#~ "ÀܳÀßÄê¤Ë¤Ï¡¢¤¤¤Ä¤Ç¤â draknet ¤òµ¯Æ°¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#~ msgid ""
-#~ "Welcome to %s the operating system chooser!\n"
-#~ "\n"
-#~ msgstr ""
-#~ "%s operating system chooser-he youkosou!\n"
-#~ "\n"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "LAN ¤òºÆÀßÄꤹ¤ë"
-
-#~ msgid ""
-#~ " Introduction\n"
-#~ "\n"
-#~ "The operating system and the different components available in the "
-#~ "Mandrake Linux distribution \n"
-#~ "shall be called the \"Software Products\" hereafter. The Software "
-#~ "Products include, but are not \n"
-#~ "restricted to, the set of programs, methods, rules and documentation "
-#~ "related to the operating \n"
-#~ "system and the different components of the Mandrake Linux distribution.\n"
-#~ "\n"
-#~ "\n"
-#~ "1. License Agreement\n"
-#~ "\n"
-#~ "Please read carefully this document. This document is a license agreement "
-#~ "between you and  \n"
-#~ "MandrakeSoft S.A., 43, rue d'Aboukir, 75002 Paris - France, which applies "
-#~ "to the Software Products.\n"
-#~ "By installing, duplicating or using the Software Products in any manner, "
-#~ "you explicitly \n"
-#~ "accept and fully agree to conform to the terms and conditions of this "
-#~ "License. \n"
-#~ "If you disagree with any portion of the License, you are not allowed to "
-#~ "install, duplicate or use \n"
-#~ "the Software Products. \n"
-#~ "Any attempt to install, duplicate or use the Software Products in a "
-#~ "manner which does not comply \n"
-#~ "with the terms and conditions of this License is void and will terminate "
-#~ "your rights under this \n"
-#~ "License. Upon termination of the License,  you must immediately destroy "
-#~ "all copies of the \n"
-#~ "Software Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "2. The GPL License and Related Licenses\n"
-#~ "\n"
-#~ "The Software Products consist of components created by different persons "
-#~ "or entities.  Most \n"
-#~ "of these components are governed under the terms and conditions of the "
-#~ "GNU General Public \n"
-#~ "Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-#~ "licenses allow you to use, \n"
-#~ "duplicate, adapt or redistribute the components which they cover. Please "
-#~ "read carefully the terms \n"
-#~ "and conditions of the license agreement for each component before using "
-#~ "any component. Any question \n"
-#~ "on a component license should be addressed to the component author and "
-#~ "not to MandrakeSoft.\n"
-#~ "The programs developed by MandrakeSoft S.A. are governed by the GPL "
-#~ "License. Documentation written \n"
-#~ "by MandrakeSoft S.A. is governed by a specific license. Please refer to "
-#~ "the documentation for \n"
-#~ "further details.\n"
-#~ "Some versions of the Software Products may contain components which are "
-#~ "not governed by the GPL \n"
-#~ "License or similar agreements. Each such component is then governed by "
-#~ "the terms and conditions \n"
-#~ "of its own specific license. Please read carefully and comply with such "
-#~ "specific licenses before \n"
-#~ "you install, use or redistribute the said components. Such licenses will "
-#~ "in general prevent the \n"
-#~ "transfer,  duplication (except for backup purposes), redistribution, "
-#~ "reverse engineering, \n"
-#~ "de-assembly, \n"
-#~ "de-compilation or modification of the component. Any breach of agreement "
-#~ "will immediately terminate \n"
-#~ "your rights under the specific license. Unless the specific license terms "
-#~ "grant you such rights, \n"
-#~ "you usually cannot install the programs on more than one system, or adapt "
-#~ "it to be used on a \n"
-#~ "network. \n"
-#~ "In doubt, please contact directly the distributor or editor of the "
-#~ "component. Transfer to third \n"
-#~ "parties or copying of such components including the documentation is "
-#~ "usually forbidden.\n"
-#~ "\n"
-#~ "\n"
-#~ "3. Intellectual Property Rights\n"
-#~ "\n"
-#~ "All rights to the components of the Software Products belong to their "
-#~ "respective authors and are \n"
-#~ "protected by intellectual property and copyright laws applicable to "
-#~ "software programs.\n"
-#~ "MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-#~ "Products, as a whole or in \n"
-#~ "parts,\n"
-#~ "by all means and for all purposes.\n"
-#~ "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-#~ "MandrakeSoft S.A.  All rights \n"
-#~ "are \n"
-#~ "reserved. The duplication is forbidden without prior written consent by "
-#~ "MandrakeSoft S.A.\n"
-#~ "\n"
-#~ "\n"
-#~ "4. Limited Warranty\n"
-#~ "\n"
-#~ "The Software Products and attached documentation are provided \"as is\", "
-#~ "with no warranty, to the \n"
-#~ "extent permitted by law. Should the Software Products be defective, "
-#~ "MandrakeSoft S.A. will at its \n"
-#~ "own will either replace the Software Products, or reimburse the paid "
-#~ "fee.\n"
-#~ "This limited warranty is void if you fail to comply to the "
-#~ "recommendations, instructions and \n"
-#~ "conditions \n"
-#~ "of use listed in the documentation or license agreements of the Software "
-#~ "Products.\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. will in no "
-#~ "circumstances be liable for any \n"
-#~ "special, \n"
-#~ "incidental, direct or indirect damages whatsoever (including without "
-#~ "limitation damages for loss of \n"
-#~ "business, interruption of business, financial loss, legal fees and "
-#~ "penalties resulting from a court \n"
-#~ "judgement, or any other consequential loss) arising out of  the use or "
-#~ "inability to use the \n"
-#~ "Software \n"
-#~ "Products, even if MandrakeSoft S.A. has been advised of the possibility "
-#~ "or occurance of such \n"
-#~ "damages.\n"
-#~ "\n"
-#~ "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN "
-#~ "SOME COUNTRIES\n"
-#~ "\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. or its distributors "
-#~ "will, in no circumstances, be \n"
-#~ "liable for any special, incidental, direct or indirect damages whatsoever "
-#~ "(including without \n"
-#~ "limitation \n"
-#~ "damages for loss of business, interruption of business, financial loss, "
-#~ "legal fees and penalties \n"
-#~ "resulting from a court judgement, or any other consequential loss) "
-#~ "arising out of the possession \n"
-#~ "and \n"
-#~ "use of software components or arising out of  downloading software "
-#~ "components from one of \n"
-#~ "Mandrake Linux \n"
-#~ "sites  which are prohibited or restricted in some countries by local "
-#~ "laws. This limited liability \n"
-#~ "applies to, but is not restricted to, the strong cryptography components "
-#~ "included in the Software \n"
-#~ "Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "5. Governing Laws \n"
-#~ "\n"
-#~ "If any portion of this agreement is held void, illegal or inapplicable by "
-#~ "a court judgement, this \n"
-#~ "portion is excluded from this contract. You remain bound by the other "
-#~ "applicable sections of the \n"
-#~ "agreement.\n"
-#~ "The terms and conditions of this License are governed by the Laws of "
-#~ "France.\n"
-#~ "All disputes on the terms of this license will preferably be settled out "
-#~ "of court. As a last \n"
-#~ "resort, \n"
-#~ "the dispute will be referred to the appropriate Courts of Law of Paris - "
-#~ "France.\n"
-#~ "For any question on this document, please contact MandrakeSoft S.A.,  \n"
-#~ "43, rue d'Aboukir, 75002 Paris - France\n"
-#~ msgstr ""
-#~ " Introduction\n"
-#~ "\n"
-#~ "The operating system and the different components available in the "
-#~ "Mandrake Linux distribution \n"
-#~ "shall be called the \"Software Products\" hereafter. The Software "
-#~ "Products include, but are not \n"
-#~ "restricted to, the set of programs, methods, rules and documentation "
-#~ "related to the operating \n"
-#~ "system and the different components of the Mandrake Linux distribution.\n"
-#~ "\n"
-#~ "\n"
-#~ "1. License Agreement\n"
-#~ "\n"
-#~ "Please read carefully this document. This document is a license agreement "
-#~ "between you and  \n"
-#~ "MandrakeSoft S.A., 43, rue d'Aboukir, 75002 Paris - France, which applies "
-#~ "to the Software Products.\n"
-#~ "By installing, duplicating or using the Software Products in any manner, "
-#~ "you explicitly \n"
-#~ "accept and fully agree to conform to the terms and conditions of this "
-#~ "License. \n"
-#~ "If you disagree with any portion of the License, you are not allowed to "
-#~ "install, duplicate or use \n"
-#~ "the Software Products. \n"
-#~ "Any attempt to install, duplicate or use the Software Products in a "
-#~ "manner which does not comply \n"
-#~ "with the terms and conditions of this License is void and will terminate "
-#~ "your rights under this \n"
-#~ "License. Upon termination of the License,  you must immediately destroy "
-#~ "all copies of the \n"
-#~ "Software Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "2. The GPL License and Related Licenses\n"
-#~ "\n"
-#~ "The Software Products consist of components created by different persons "
-#~ "or entities.  Most \n"
-#~ "of these components are governed under the terms and conditions of the "
-#~ "GNU General Public \n"
-#~ "Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-#~ "licenses allow you to use, \n"
-#~ "duplicate, adapt or redistribute the components which they cover. Please "
-#~ "read carefully the terms \n"
-#~ "and conditions of the license agreement for each component before using "
-#~ "any component. Any question \n"
-#~ "on a component license should be addressed to the component author and "
-#~ "not to MandrakeSoft.\n"
-#~ "The programs developed by MandrakeSoft S.A. are governed by the GPL "
-#~ "License. Documentation written \n"
-#~ "by MandrakeSoft S.A. is governed by a specific license. Please refer to "
-#~ "the documentation for \n"
-#~ "further details.\n"
-#~ "Some versions of the Software Products may contain components which are "
-#~ "not governed by the GPL \n"
-#~ "License or similar agreements. Each such component is then governed by "
-#~ "the terms and conditions \n"
-#~ "of its own specific license. Please read carefully and comply with such "
-#~ "specific licenses before \n"
-#~ "you install, use or redistribute the said components. Such licenses will "
-#~ "in general prevent the \n"
-#~ "transfer,  duplication (except for backup purposes), redistribution, "
-#~ "reverse engineering, \n"
-#~ "de-assembly, \n"
-#~ "de-compilation or modification of the component. Any breach of agreement "
-#~ "will immediately terminate \n"
-#~ "your rights under the specific license. Unless the specific license terms "
-#~ "grant you such rights, \n"
-#~ "you usually cannot install the programs on more than one system, or adapt "
-#~ "it to be used on a \n"
-#~ "network. \n"
-#~ "In doubt, please contact directly the distributor or editor of the "
-#~ "component. Transfer to third \n"
-#~ "parties or copying of such components including the documentation is "
-#~ "usually forbidden.\n"
-#~ "\n"
-#~ "\n"
-#~ "3. Intellectual Property Rights\n"
-#~ "\n"
-#~ "All rights to the components of the Software Products belong to their "
-#~ "respective authors and are \n"
-#~ "protected by intellectual property and copyright laws applicable to "
-#~ "software programs.\n"
-#~ "MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-#~ "Products, as a whole or in \n"
-#~ "parts,\n"
-#~ "by all means and for all purposes.\n"
-#~ "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-#~ "MandrakeSoft S.A.  All rights \n"
-#~ "are \n"
-#~ "reserved. The duplication is forbidden without prior written consent by "
-#~ "MandrakeSoft S.A.\n"
-#~ "\n"
-#~ "\n"
-#~ "4. Limited Warranty\n"
-#~ "\n"
-#~ "The Software Products and attached documentation are provided \"as is\", "
-#~ "with no warranty, to the \n"
-#~ "extent permitted by law. Should the Software Products be defective, "
-#~ "MandrakeSoft S.A. will at its \n"
-#~ "own will either replace the Software Products, or reimburse the paid "
-#~ "fee.\n"
-#~ "This limited warranty is void if you fail to comply to the "
-#~ "recommendations, instructions and \n"
-#~ "conditions \n"
-#~ "of use listed in the documentation or license agreements of the Software "
-#~ "Products.\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. will in no "
-#~ "circumstances be liable for any \n"
-#~ "special, \n"
-#~ "incidental, direct or indirect damages whatsoever (including without "
-#~ "limitation damages for loss of \n"
-#~ "business, interruption of business, financial loss, legal fees and "
-#~ "penalties resulting from a court \n"
-#~ "judgement, or any other consequential loss) arising out of  the use or "
-#~ "inability to use the \n"
-#~ "Software \n"
-#~ "Products, even if MandrakeSoft S.A. has been advised of the possibility "
-#~ "or occurance of such \n"
-#~ "damages.\n"
-#~ "\n"
-#~ "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN "
-#~ "SOME COUNTRIES\n"
-#~ "\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. or its distributors "
-#~ "will, in no circumstances, be \n"
-#~ "liable for any special, incidental, direct or indirect damages whatsoever "
-#~ "(including without \n"
-#~ "limitation \n"
-#~ "damages for loss of business, interruption of business, financial loss, "
-#~ "legal fees and penalties \n"
-#~ "resulting from a court judgement, or any other consequential loss) "
-#~ "arising out of the possession \n"
-#~ "and \n"
-#~ "use of software components or arising out of  downloading software "
-#~ "components from one of \n"
-#~ "Mandrake Linux \n"
-#~ "sites  which are prohibited or restricted in some countries by local "
-#~ "laws. This limited liability \n"
-#~ "applies to, but is not restricted to, the strong cryptography components "
-#~ "included in the Software \n"
-#~ "Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "5. Governing Laws \n"
-#~ "\n"
-#~ "If any portion of this agreement is held void, illegal or inapplicable by "
-#~ "a court judgement, this \n"
-#~ "portion is excluded from this contract. You remain bound by the other "
-#~ "applicable sections of the \n"
-#~ "agreement.\n"
-#~ "The terms and conditions of this License are governed by the Laws of "
-#~ "France.\n"
-#~ "All disputes on the terms of this license will preferably be settled out "
-#~ "of court. As a last \n"
-#~ "resort, \n"
-#~ "the dispute will be referred to the appropriate Courts of Law of Paris - "
-#~ "France.\n"
-#~ "For any question on this document, please contact MandrakeSoft S.A.,  \n"
-#~ "43, rue d'Aboukir, 75002 Paris - France\n"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "¥³¥ó¥Ô¥å¡¼¥¿¤Ï¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤ò¶¦Í­¤¹¤ë¤è¤¦¤ËÀßÄê¤Ç¤­¤Þ¤¹¡£\n"
-#~ "\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "ÀßÄ꤬Á´Éô½ª¤ï¤ê¤Þ¤·¤¿¡£\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "ÉáÄ̤Υâ¥Ç¥à¤Ç¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "ISDN¤ò»È¤Ã¤Æ¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "DSL(¤Þ¤¿¤ÏADSL)¤ò»È¤Ã¤Æ¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "¥±¡¼¥Ö¥ë¤ò»È¤Ã¤Æ¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "°ìÄê»þ´Ö¡ÊÉá˳èÆ°¤¬¤Ê¤¤¤È¡¢¼«Æ°Åª¤ËÅÅÏäòÀÚ¤ê¤Þ¤¹¡£\n"
-#~ "Éÿô¤ò»ØÄꤷ¤Þ¤·¤ç¤¦ (¼«Æ°ÀÚÃǤ·¤¿¤¯¤Ê¤±¤ì¤Ð¶õÇò¤Î¤Þ¤Þ¡Ë"
-
-#~ msgid "Germany"
-#~ msgstr "¥É¥¤¥Ä"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "¥É¥¤¥Ä (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "¤É¤¦¤·¤Þ¤¹¤«¡©"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "¥¤¥ó¥¹¥È¡¼¥ë¡¿¥ì¥¹¥­¥å¡¼"
-
-#~ msgid "Rescue"
-#~ msgstr "¥ì¥¹¥­¥å¡¼"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "¤É¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥¿¥¤¥×¤Ë¤·¤Þ¤¹¤«¡©"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "GNU/Linux¤Î¥¤¥ó¥¹¥È¡¼¥ë¤¬½é¤á¤Æ¤«¡¢Ê£¿ô¤Î¥Ç¥£¥¹¥È¥ê¥Ó¥å¡¼¥·¥ç¥ó¤ä\n"
-#~ "¥Ð¡¼¥¸¥ç¥ó¤È¶¦Â¸¤µ¤»¤¿¤¤¤È¤­¤Ë¤Ï¡¢¡Ö¥¤¥ó¥¹¥È¡¼¥ë¡×¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "¤¹¤Ç¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤º¤ß¤ÎMandrake Linux¤òµßºÑ¤·¤¿¤¤¤Ê¤é¡¢¡Ö¥ì¥¹¥­¥å¡¼¡×¤ò\n"
-#~ "Áª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "ÁªÂò¤ÎÌÜ°Â:\n"
-#~ "\n"
-#~ "  - Á´¼«Æ°(¿ä¾©): GNU/Linux¤Î¥¤¥ó¥¹¥È¡¼¥ë¤¬½é¤á¤Æ¤Ê¤é¡¢¤³¤ì¤òÁª¤Ó¤Þ¤·¤ç"
-#~ "¤¦¡£\n"
-#~ "\n"
-#~ "  - ¥«¥¹¥¿¥Þ¥¤¥º: GNU/Linux ¤Ë¾Ü¤·¤±¤ì¤Ð¡¢¼«Ê¬¤Î¥Þ¥·¥ó¤Î¼ç¤Ê»È¤¤Êý¤Ë\n"
-#~ "    ¤¢¤ï¤»¤ÆÁª¤Ó¤Þ¤·¤ç¤¦¡£¾Ü¤·¤¯¤Ï°Ê²¼¤ò»²¾È¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "  - ¥¨¥­¥¹¥Ñ¡¼¥È: ¤³¤ì¤ÏËÜÅö¤ËGNU/Linux¤Ë¾Ü¤·¤¤¿Í¤¬¡¢Èó¾ï¤ËÆüì¤Ê\n"
-#~ "    ¥¤¥ó¥¹¥È¡¼¥ë¤ò¤·¤¿¤¤¾ì¹ç¤ËÁª¤Ó¤Þ¤¹¡£¡Ö¥«¥¹¥¿¥Þ¥¤¥º¡×\n"
-#~ "    ¤Î¥¤¥ó¥¹¥È¡¼¥ë¤ÈƱ¤¸¤¯¡¢¼«Ê¬¤Î¥·¥¹¥Æ¥à¤Î»È¤¤Êý¤òÁª¤Ù¤Þ¤¹¡£\n"
-#~ "    ¤Ç¤â¡¢´°Á´¤Ë¼«¿®¤¬¤Ê¤¤¤Ê¤é¡¢¡ÖÀäÂФˡפ³¤ì¤Ï»È¤ï¤Ê¤¤¤Ç¤¯¤À¤µ¤¤¡ª\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "GNU/LinuxÍѤΥѡ¼¥Æ¥£¥·¥ç¥ó¤Î½àÈ÷¤¬¤Ç¤­¤Æ¤¤¤ì¤Ð¡ÊÁ°¤Ë GNU/Linux \n"
-#~ "¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤ê¡¢\n"
-#~ "Ê̤Υ桼¥Æ¥£¥ê¥Æ¥£¤Ç¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òºî¤Ã¤¿¾ì¹ç¡Ë¡¢¤É¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë\n"
-#~ "Mandrake Linux¥·¥¹¥Æ¥à¤ò¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¤«¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "¤â¤·¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òºî¤Ã¤Æ¤¤¤Ê¤±¤ì¤Ð¡¢¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò\n"
-#~ "¤³¤³¤Çºî¤ê¤Þ¤¹¡£¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤È¤¤¤¦¤Î¤Ï¡¢¥³¥ó¥Ô¥å¡¼¥¿¤Î¥Ï¡¼¥É¥Ç¥£¥¹¥¯\n"
-#~ "¤òÌÜŪ¤Ë¤¢¤ï¤»¤ÆÏÀÍýŪ¤Ë¶èÀڤ뤳¤È¤Ç¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¿·¤·¤¯¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¤Ä¤¯¤ë¤Ê¤é¡¢¡Ö¼«Æ°³ä¤êÅö¤Æ¡×¤òÁª¤Ù¤Ð¡¢¼«Æ°Åª¤Ë\n"
-#~ "LinuxÍѤΥѡ¼¥Æ¥£¥·¥ç¥ó¤¬¤Ç¤­¤¢¤¬¤ê¤Þ¤¹¡£¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¤Ä¤¯¤ë¥Ï¡¼¥É\n"
-#~ "¥Ç¥£¥¹¥¯¤òÁª¤Ö¤È¤­¤Ï¡¢ºÇ½é¤ÎIDE¥É¥é¥¤¥Ö¤¬¡Öhda¡×¡¢2ÈÖÌܤ¬¡Öhdb¡×¡¢ºÇ½é\n"
-#~ "¤ÎSCSI¥É¥é¥¤¥Ö¤¬¡Ösda¡×¡¢¤È¤¤¤¦¶ñ¹ç¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤è¤¯¤¢¤ë¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ÎÀÚ¤êÊý¤È¤·¤Æ¤Ï¡¢root¥Ñ¡¼¥Æ¥£¥·¥ç¥ó(/) ¤È\n"
-#~ "boot¥Ñ¡¼¥Æ¥£¥·¥ç¥ó(/boot) ¤òºî¤ê¤Þ¤¹¡£root¤Ï¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤Î\n"
-#~ "¥Ç¥£¥ì¥¯¥È¥ê¤Î¤Æ¤Ã¤Ú¤ó¤Ç¡¢/boot¤Ë¤Ï¥³¥ó¥Ô¥å¡¼¥¿¤Î¥¹¥¤¥Ã¥Á¤òÆþ¤ì¤¿\n"
-#~ "¤È¤­¤Ëµ¯Æ°¤ËɬÍפʥե¡¥¤¥ë¤¬ÃÖ¤¤¤Æ¤¢¤ë¤È¤³¤í¤Ç¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÀÚ¤ë¤È¡¢¤Õ¤Ä¤¦¤Ï¤½¤³¤Î¥Ç¡¼¥¿¤ÏÁ´Éô¾Ã¤¨¤Æ¡¢¤â¤È¤Ë\n"
-#~ "Ìá¤ê¤Þ¤»¤ó¡£¤À¤«¤é¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÀÚ¤ë¤Î¤Ï¡¢½é¿´¼Ô¤Ë¤Ï¤ª¤Ã¤«¤Ê¤¤\n"
-#~ "¤Ç¤¹¤·¡¢¤È¤Ã¤Æ¤âµ¤Èè¤ì¤¹¤ë¤â¤Î¤Ç¤¹¡£¤½¤¦¤Ê¤é¤Ê¤¤¤è¤¦¤Ë¡¢DiskDrake\n"
-#~ "¤Ï¤³¤Î¥×¥í¥»¥¹¤ò¤Ê¤ë¤Ù¤¯´Êñ¤Ë¤·¤Þ¤¹¡£¤Þ¤º¤Ï¥É¥­¥å¥á¥ó¥Æ¡¼¥·¥ç¥ó¤ò\n"
-#~ "Æɤó¤Ç¡¢Àè¤Ë¿Ê¤àÁ°¤Ë¤¸¤Ã¤¯¤êµ¤¤òÍî¤ÁÃ失¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤É¤Î¥ª¥×¥·¥ç¥ó¤â¡¢¥­¡¼¥Ü¡¼¥É¤ÇÁª¤Ù¤Þ¤¹¡£¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁª¤Ö¤Ë¤Ï¡¢\n"
-#~ "¥¿¥Ö¤È¾å²¼¤Î¥«¡¼¥½¥ë¥­¡¼¤ò»È¤¤¤Þ¤·¤ç¤¦¡£¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁª¤ó¤À¤é¡¢\n"
-#~ "¼¡¤Î¥­¡¼¤¬»È¤¨¤Þ¤¹¡§\n"
-#~ "\n"
-#~ "- Ctrl-c  ¿·¤·¤¤¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òºî¤ë¡Ê¶õ¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁª¤ó¤À¾ì¹ç¡Ë\n"
-#~ "\n"
-#~ "- Ctrl-d  ¤½¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òºï½ü\n"
-#~ "\n"
-#~ "- Ctrl-m  ¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È¤ÎÀßÄê\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "¿·¤·¤¯ºî¤Ã¤¿¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¤¹¤Ù¤Æ¡¢¥Õ¥©¡¼¥Þ¥Ã¥È¤·¤Ê¤¤¤È»È¤¨¤Þ¤»¤ó\n"
-#~ "¡Ê¥Õ¥©¡¼¥Þ¥Ã¥È¤È¤¤¤¦¤Î¤Ï¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤ò¤Ä¤¯¤ë¤³¤È¤Ç¤¹¡Ë¡£¤µ¤é¤Ë\n"
-#~ "´û¸¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥Õ¥©¡¼¥Þ¥Ã¥È¤·¤Æ¡¢¤½¤³¤Î¥Ç¡¼¥¿¤ò¾Ãµî¤â¤Ç¤­¤Þ¤¹¡£\n"
-#~ "Ãí°Õ¡§´û¸¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¡¢¥Õ¥©¡¼¥Þ¥Ã¥È¤·¤Ê¤ª¤¹É¬ÍפϤ¢¤ê¤Þ¤»¤ó¡£\n"
-#~ "ÆäËÊݸ¤·¤¿¤¤¥Ç¡¼¥¿¡Ê/home ¤È /usr/local¤Ê¤É¡Ë¤¬¤¢¤ì¤Ð¡¢¥Õ¥©¡¼¥Þ¥Ã¥È\n"
-#~ "¤·¤Æ¤Ï¤¤¤±¤Þ¤»¤ó¡£"
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Áª¤ó¤À¥Ñ¥Ã¥±¡¼¥¸¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Æ¤¤¤Þ¤¹¡£¤³¤ì¤Ë¤Ï¿ôʬ¤«¤«¤ê¤Þ¤¹¤è¡£\n"
-#~ "´û¸¥·¥¹¥Æ¥à¤Î¥¢¥Ã¥×¥°¥ì¡¼¥É¤òÁª¤ó¤À¾ì¹ç¤Ï¡¢»öÁ°¤ËÄ´¤Ù¤ë¤³¤È¤¬Â¿¤¤¤Î\n"
-#~ "¤Ç¡¢¤â¤Ã¤È¤«¤«¤ê¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "¤â¤· DrakX ¤¬¥Þ¥¦¥¹¤ò¸«¤Ä¤±¤é¤ì¤Ê¤«¤Ã¤¿¤ê¡¢²¿¤¬Áª¤Ð¤ì¤¿¤«¥Á¥§¥Ã¥¯\n"
-#~ "¤·¤¿¤«¤Ã¤¿¤ê¤¹¤ë¤È¤­¤Ï¡¢¾å¤Ë¥Þ¥¦¥¹¤Î°ìÍ÷¤¬½Ð¤Æ¤¯¤ë¤Ï¤º¤Ç¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX ¤Î¤ä¤Ã¤¿ÀßÄê¤Ç¤è¤±¤ì¤Ð¡¢¡ÖOK¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£\n"
-#~ "ÀßÄ꤬¤Á¤¬¤Ã¤Æ¤¤¤¿¤é¡¢¼«Ê¬¤Î¥Þ¥¦¥¹¤Ë¤¤¤Á¤Ð¤ó\n"
-#~ "¶á¤¤¼ïÎà¤Î¥Þ¥¦¥¹¤ò¥á¥Ë¥å¡¼¤«¤éÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥·¥ê¥¢¥ë¥Þ¥¦¥¹¤ò»È¤Ã¤Æ¤¤¤ë¤È¤­¤Ë¤Ï¡¢¤½¤ì¤¬¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤ë¥·¥ê¥¢¥ë¥Ý¡¼¥È\n"
-#~ "¤â»ØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "¤³¤³¤Ç¤Ï¡¢¥í¡¼¥«¥ë¥¨¥ê¥¢¥Í¥Ã¥È¥ï¡¼¥¯¡ÊLAN¡Ë¤«¥â¥Ç¥à¤ÎÀßÄê¤ò¤·¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "¡Ö¥í¡¼¥«¥ë LAN¡×¤òÁª¤Ö¤È¡¢DrakX ¤Ï¥Þ¥·¥ó¤Î¥¤¡¼¥µ¥Í¥Ã¥È¥¢¥À¥×¥¿¤òõ¤·\n"
-#~ "¤Þ¤¹¡£PCI¤Î¥¢¥À¥×¥¿¤Ï¼«Æ°Åª¤Ë¸«¤Ä¤«¤Ã¤ÆÀßÄꤵ¤ì¤ë¤Ï¤º¤Ç¤¹¡£\n"
-#~ "¤â¤·¤ª»È¤¤¤Î¥¢¥À¥×¥¿¤¬ISA ¤Ê¤é¡¢¼«Æ°¤Ç¤Ï¸¡½Ð¤Ç¤­¤Þ¤»¤ó¡£¤³¤Î¾ì¹ç¡¢\n"
-#~ "¤¢¤È¤«¤é°ìÍ÷ɽ¤¬½Ð¤Æ¤¯¤ë¤Î¤Ç¡¢¤½¤³¤«¤éÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "SCSI¥¢¥À¥×¥¿¤Î¾ì¹ç¡¢¤È¤ê¤¢¤¨¤º¥É¥é¥¤¥Ð¤Ë¥¢¥À¥×¥¿¤òõ¤µ¤»¤Æ¤ß¤Þ¤·¤ç¤¦¡£\n"
-#~ "¥À¥á¤Ê¤é¡¢¼«Ê¬¤Ç¥É¥é¥¤¥Ð¤Î¥ª¥×¥·¥ç¥ó¤ò»ØÄꤷ¤Þ¤¹¡£»ØÄꥪ¥×¥·¥ç¥ó¤Ï¡¢\n"
-#~ "¼«Ê¬¤Î¥Ï¡¼¥É¥¦¥§¥¢¤ÎÉÕ°ʸ½ñ¤ÇÄ´¤Ù¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤³¤Î¥Þ¥·¥ó¤¬¤¹¤Ç¤Ë´û¸¤Î¥Í¥Ã¥È¥ï¡¼¥¯¤Ë¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤ë¤Ê¤é¡¢¥Í¥Ã¥È¥ï¡¼¥¯\n"
-#~ "´ÉÍý¼Ô¤ËɬÍפʾðÊó¤ò¶µ¤ï¤Ã¤Æ¤¤¤ë¤Ï¤º¤Ç¤¹(IP ¥¢¥É¥ì¥¹¡¢¥Í¥Ã¥È¥ï¡¼¥¯¤Î\n"
-#~ "¥µ¥Ö¥Þ¥¹¥¯¡ÊÄ̾Υͥåȥޥ¹¥¯¡Ë¡¢¥Û¥¹¥È̾)¡£¼«Âð¤Ê¤É¤Ç¼«Ê¬¤À¤±¤Î¥Í¥Ã¥È\n"
-#~ "¥ï¡¼¥¯¤òºî¤í¤¦¤È¤·¤Æ¤¤¤ë¤Ê¤é¡¢¥¢¥É¥ì¥¹¤Ê¤É¤Ï¼«Ê¬¤ÇÁª¤Ó¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¡Ö¥â¥Ç¥à¤Ë¤è¤ë¥À¥¤¥¢¥ë¥¢¥Ã¥×¡×¤òÁª¤Ö¤È¡¢¥â¥Ç¥à¤Ë¤è¤ë¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ\n"
-#~ "¤¬ÀßÄꤵ¤ì¤Þ¤¹¡£DrakX ¤Ï¥â¥Ç¥à¤òõ¤·¤Þ¤¹¤¬¡¢¤³¤ì¤¬¼ºÇÔ¤·¤¿¤é¡¢¥â¥Ç¥à¤Î\n"
-#~ "¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤ë¥·¥ê¥¢¥ë¥Ý¡¼¥È¤ò¼«Ê¬¤Ç»ØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "GNU/Linux ¤Ç¤Ï¤¤¤í¤ó¤Ê¥×¥ê¥ó¥¿¤¬»È¤¨¤Þ¤¹¡£¤¬¡¢¤½¤ì¤¾¤ìÀßÄ꤬¤Á¤¬¤¤¤Þ¤¹¡£\n"
-#~ "¤¿¤À¤·¡¢°õºþ¥¹¥×¡¼¥é¤Ï¥Ç¥Õ¥©¥ë¥È¤Î¥×¥ê¥ó¥¿Ì¾¤È¤·¤Æ¡Ölp¡×¤ò»È¤¤¤Þ¤¹¡£\n"
-#~ "¤À¤«¤é¡¢lp¤È¤¤¤¦Ì¾Á°¤Î¥×¥ê¥ó¥¿¤¬°ì¤Ä¤ÏɬÍפǤ¹¡£¤Ç¤â¡¢°ì¤Ä¤Î¥×¥ê¥ó¥¿\n"
-#~ "¤ËÊ£¿ô¤Î̾Á°¤ò¤Ä¤±¤ë¤³¤È¤â¤Ç¤­¤Þ¤¹¡£¤³¤Î¤È¤­¤Ï¡Ö|¡×¤Ç¶èÀÚ¤ê¤Þ¤¹¡£\n"
-#~ "¤À¤«¤é¡¢¥×¥ê¥ó¥¿¤Ë¤ï¤«¤ê¤ä¤¹¤¤Ì¾Á°¤ò¤Ä¤±¤¿¤±¤ì¤Ð¡¢¤½¤ì¤òÀè¤Ë½ñ¤¤¤Æ\n"
-#~ "¤ª¤±¤Ð¤¹¤ß¤Þ¤¹¡£¤¿¤È¤¨¤Ð¡ÖMy Printer|lp¡×¤È¤¤¤¦¶ñ¹ç¤Ë¡£\n"
-#~ "̾Á°¤ÎÃæ¤Ë¡Ölp¡×¤¬´Þ¤Þ¤ì¤ë¥×¥ê¥ó¥¿¤¬¥Ç¥Õ¥©¥ë¥È¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥×¥ê¥ó¥¿¤¬Ä¾ÀÜ¥³¥ó¥Ô¥å¡¼¥¿¤Ë¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤ì¤Ð¡¢¡Ö¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¡×¤ò\n"
-#~ "Áª¤Ó¤Þ¤¹¡£¤³¤Î¾ì¹ç¡¢¥×¥ê¥ó¥¿¤Î¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤ë¥Ý¡¼¥È¤ò»ØÄꤷ¤Æ¡¢Å¬ÀÚ¤Ê\n"
-#~ "¥Õ¥£¥ë¥¿¤òÁª¤Ó¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Î¤Û¤«¤ÎUnix¥Þ¥·¥ó¤Ë¤Ä¤Ê¤¬¤Ã¤¿¥×¥ê¥ó¥¿¤ò»È¤¦¤Ê¤é¡¢\n"
-#~ "¡Ö¥ê¥â¡¼¥È lpd¡×¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£¤³¤ì¤ò»È¤¦¤Ë¤Ï¡¢¥æ¡¼¥¶Ì¾¤ä¥Ñ¥¹¥ï¡¼¥É¤Ï\n"
-#~ "¤¤¤ê¤Þ¤»¤ó¤¬¡¢¤½¤Î¥µ¡¼¥Ð¾å¤Î°õºþ¥­¥å¡¼¤Î̾Á°¤¬Íפê¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "SMB¥×¥ê¥ó¥¿¤ò»È¤¦¤Ê¤é¡Ê¤Ä¤Þ¤ê¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Î¥¦¥£¥ó¥É¥¦¥º9x/NT¥Þ¥·¥ó\n"
-#~ "¤Ë¤Ä¤Ê¤¬¤Ã¤¿¥×¥ê¥ó¥¿¤ò»È¤¦¤È¤¤¤¦°ÕÌ£¤Ç¤¹¡Ë¡¢¤½¤Î¥Þ¥·¥ó¤ÎSMB ̾¡Ê¤³¤ì\n"
-#~ "¤ÏTCP/IP̾¤È¤ÏÊÌʪ¤Ç¤¹¡Ë¤È¡¢¾ì¹ç¤Ë¤è¤Ã¤Æ¤ÏIP¥¢¥É¥ì¥¹¤¬É¬Íפˤʤê¤Þ¤¹¡£\n"
-#~ "¤µ¤é¤Ë¥æ¡¼¥¶Ì¾¡¢¥ï¡¼¥¯¥°¥ë¡¼¥×̾¤È¥Ñ¥¹¥ï¡¼¥É¡¢¤µ¤é¤Ë¤Ï¥×¥ê¥ó¥¿Ì¾¤¬\n"
-#~ "¤Ê¤¤¤È¥×¥ê¥ó¥¿¤Ë¥¢¥¯¥»¥¹¤Ç¤­¤Þ¤»¤ó¡£NetWare ¥×¥ê¥ó¥¿¤â¡¢¥ï¡¼¥¯¥°¥ë¡¼¥×¤Ï\n"
-#~ "ÉÔÍפʤÀ¤±¤Ç¡¢¤Û¤È¤ó¤ÉƱ¤¸¤Ç¤¹¡£"
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "¤³¤³¤Ç¤Ï¡Ö¤Ï¤¤¡×¤ÈÅú¤¨¤ë¤Î¤ò¶¯¤¯¿ä¾©¤·¤Þ¤¹¡£¸å¤«¤éMS¥¦¥£¥ó¥É¥¦¥º¤ò\n"
-#~ "¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤é¡¢¥Ö¡¼¥È¥»¥¯¥¿¤Ï¾å½ñ¤­¤µ¤ì¤Þ¤¹¡£¤½¤¦¤Ê¤Ã¤¿¤é¡¢\n"
-#~ "¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤òºî¤Ã¤Æ¤ª¤«¤Ê¤¤¤È¡¢Linux¤¬Î©¤Á¾å¤²¤é¤ì¤Ê¤¯¤Ê¤ê¤Þ¤¹¤è¡£"
-
-#~ msgid "Move your wheel!"
-#~ msgstr "¥Û¥¤¡¼¥ë¤ò¤Þ¤ï¤·¤Æ¤ß¤Þ¤·¤ç¤¦¡ª"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Êѹ¹¤òÁ´ÉôÇË´þ¤·¤Þ¤¹¤«¡©"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "¥Þ¥¦¥¹¤Î·¿¤Ï¤Ê¤ó¤Ç¤¹¤«¡©"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "²òÁüÅ٤μ«Æ°ÀßÄê"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Í­¸ú¤Ê²òÁüÅÙ¤òÆÀ¤ë¤¿¤á¤ËÊ̤ÎÊýË¡¤ò»î¤·¤Æ¤ß¤Þ¤¹¡£\n"
-#~ "¥¹¥¯¥ê¡¼¥ó¤¬ÌÀÌǤ·¤Þ¤¹...\n"
-#~ "¤¤¤ä¤Ê¤é¥â¥Ë¥¿¤Î¥¹¥¤¥Ã¥Á¤òÀڤäƤâ¤À¤¤¤¸¤ç¤¦¤Ö¡£½ª¤ï¤Ã¤¿¤é beep ²»\n"
-#~ "¤ÇÃΤ餻¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Í­¸ú¤Ê²òÁüÅÙ(Îã: 800x600)¤ò¼«Æ°Åª¤Ëõ¤»¤Þ¤¹¡£\n"
-#~ "¤¬¡¢¤³¤ì¤Ç¥Þ¥·¥ó¤¬»ß¤Þ¤Ã¤Æ¤·¤Þ¤¦¤«¤â¤·¤ì¤Þ¤»¤ó¡£\n"
-#~ "õ¤·¤Æ¤ß¤Þ¤·¤ç¤¦¤«¡©"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Í­¸ú¤Ê¥â¡¼¥É¤¬¸«ÉÕ¤«¤ê¤Þ¤»¤ó\n"
-#~ "¾¤Î¥Ó¥Ç¥ª¥«¡¼¥É/¥â¥Ë¥¿¤Ç»î¤·¤Æ²¼¤µ¤¤¡£"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "²òÁüÅ٤μ«Æ°¸¡º÷"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-client"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB ¥Þ¥¦¥¹"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB ¥Þ¥¦¥¹¡Ê2¥Ü¥¿¥ó¡Ë"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB ¥Þ¥¦¥¹¡Ê3¥Ü¥¿¥ó°Ê¾å¡Ë"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB¥Þ¥¦¥¹"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB¥Þ¥¦¥¹¡Ê2¥Ü¥¿¥ó¡Ë"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB¥Þ¥¦¥¹¡Ê3¥Ü¥¿¥ó°Ê¾å¡Ë"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI ¥Ð¥¹¥Þ¥¦¥¹"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "¥Þ¥¤¥¯¥í¥½¥Õ¥È¡¦¥Ð¥¹¥Þ¥¦¥¹"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "¥í¥¸¥Æ¥Ã¥¯¡¦¥Ð¥¹¥Þ¥¦¥¹"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB¥Þ¥¦¥¹¡Ê3¥Ü¥¿¥ó°Ê¾å¡Ë"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A °Ê¾å(serial)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (¥·¥ê¥¢¥ë)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (¥·¥ê¥¢¥ë)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (¥·¥ê¥¢¥ë)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "ÈÆÍÑ¥Þ¥¦¥¹ (¥·¥ê¥¢¥ë)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "¥Þ¥¤¥¯¥í¥½¥Õ¥È¸ß´¹¡Ê¥·¥ê¥¢¥ë¡Ë"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "ÈÆÍѤÎ3¥Ü¥¿¥ó¥Þ¥¦¥¹ (¥·¥ê¥¢¥ë)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (¥·¥ê¥¢¥ë)"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr ""
-#~ "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤Ë¤Ï¡¢¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥À¥×¥¿¤òÀßÄꤹ¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "Please choose which network adapter do you want to use to connect to "
-#~ "internet.\n"
-#~ "If you don't know, choose eth0.\n"
-#~ msgstr ""
-#~ "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤Ë¤Ä¤Ê¤°¤¿¤á¤Î¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥À¥×¥¿¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢eth0 ¤òÁª¤ó¤Ç¤ª¤­¤Þ¤·¤ç¤¦¡£\n"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "nfs ¥Þ¥¦¥ó¥È¤Ë¼ºÇÔ"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX ¤Ï¡¢XFree 3.3¤ÈXFree 4.0ξÊý¤ÎÀßÄê¥Õ¥¡¥¤¥ë¤ò¤Ä¤¯¤ê¤Þ¤¹¡£¤Ç¤â\n"
-#~ "¥Ç¥Õ¥©¥ë¥È¤Ç¤ÏÂбþ¥Ó¥Ç¥ª¥«¡¼¥É¤¬Ìµ¤¤¸Â¤ê¡¢4.0¥µ¡¼¥Ð¤Î¤Û¤¦¤ò»È¤¤¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "XFree 3.3 ¤Î¤Þ¤Þ¤Ë¤·¤Æ¤ª¤­¤Þ¤¹¤«?"
-
-#~ msgid "Cryptographic"
-#~ msgstr "°Å¹æ²½"
-
-#~ msgid "Configure LAN"
-#~ msgstr "LAN ¤ÎÀßÄê"
-
-#~ msgid "End configuration"
-#~ msgstr "ÀßÄê¤ò½ª¤¨¤ë"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄê¤ò¤·¤Ê¤¤"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "¥·¥¹¥Æ¥à¤Î¥í¡¼¥«¥ë LAN ¥Í¥Ã¥È¥ï¡¼¥¯¤òÀßÄꤷ¤Þ¤¹¤«¡©"
-
-#~ msgid "Show less"
-#~ msgstr "³µÎ¬¤Çɽ¼¨"
-
-#~ msgid "Show more"
-#~ msgstr "¾ÜºÙ¤òɽ¼¨"
-
-#~ msgid "Take over the hard drive"
-#~ msgstr "¥Ï¡¼¥É¥É¥é¥¤¥Ö¤ò°ú¤­·Ñ¤°"
-
-#~ msgid "URI for Local printer"
-#~ msgstr "¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¤ÎURI"
-
-#~ msgid "URI for Network printer"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥×¥ê¥ó¥¿¤ÎURI"
-
-#~ msgid "Local Printer Device (URI)"
-#~ msgstr "¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¥Ç¥Ð¥¤¥¹ (URI)"
-
-#~ msgid ""
-#~ "What URI device is your printer connected to\n"
-#~ "(note that parallel:/dev/lp0 is equivalent to LPT1:)?"
-#~ msgstr ""
-#~ "¥×¥ê¥ó¥¿¤¬¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤ë¥Ç¥Ð¥¤¥¹¤Ï²¿¤Ç¤¹¤«\n"
-#~ "(Ãí°Õ ¥Ñ¥é¥ì¥ë¤Î/dev/lp0 ¤Ï LPT1: ¤Ë¤Ê¤ê¤Þ¤¹)¡©\n"
-
-#~ msgid "Network Printer Options (URI)"
-#~ msgstr "Netware ¥×¥ê¥ó¥¿¤Î¥ª¥×¥·¥ç¥ó (URI)"
-
-#~ msgid "tie"
-#~ msgstr "¥Í¥¯¥¿¥¤"
-
-#~ msgid "brunette"
-#~ msgstr "¥Ö¥ë¥Í¥Ã¥È"
-
-#~ msgid "girl"
-#~ msgstr "½÷¤Î»Ò"
-
-#~ msgid "woman-blond"
-#~ msgstr "¥Ö¥í¥ó¥É½÷À­"
-
-#~ msgid "automagic"
-#~ msgstr "¥ª¡¼¥È¥Þ¥¸¥Ã¥¯"
-
-#~ msgid "Have you been provided with a hostname?"
-#~ msgstr "¥Û¥¹¥È¥Í¡¼¥à¤òÄ󶡤µ¤ì¤Æ¤¤¤Þ¤¹¤«¡©"
-
-#~ msgid "Local Area Network specification"
-#~ msgstr "¥í¡¼¥«¥ë¥¨¥ê¥¢¥Í¥Ã¥È¥ï¡¼¥¯¤Î¾ÜºÙ"
-
-#~ msgid "You may now decide which class C network to use.\n"
-#~ msgstr "¤É¤Î¥¯¥é¥¹C¥Í¥Ã¥È¥ï¡¼¥¯¤ò»È¤¦¤«·è¤á¤Æ¤¯¤À¤µ¤¤¡£\n"
-
-#~ msgid "Network:"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯:"
-
-#~ msgid "Internet Connection Sharing - setup of $device"
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¶¦Í­Àܳ - $device ¤ÎÀßÄê"
-
-#~ msgid ""
-#~ "The following interface is about to be configured:\n"
-#~ "\n"
-#~ "$interface\n"
-#~ "\n"
-#~ msgstr ""
-#~ "¼¡¤Î¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¤òÀßÄꤷ¤è¤¦¤È¤·¤Æ¤Þ¤¹¡§\n"
-#~ "\n"
-#~ "$interface\n"
-#~ "\n"
-
-#~ msgid "Everything configured!"
-#~ msgstr "Á´¤Æ¤òÀßÄꤷ¤Þ¤·¤¿¡ª"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "¥­¡¼¥Ü¡¼¥É¥ì¥¤¥¢¥¦¥È¤Ï²¿¤Ç¤¹¤«¡©"
-
-#~ msgid "pptp alcatel"
-#~ msgstr "pptp alcatel"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "PCMCIA¥«¡¼¥É¤ò¤µ¤¬¤·¤Æ¤ß¤Þ¤·¤ç¤¦¤«¡©"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "%s¥Ç¥Ð¥¤¥¹¤ò¤µ¤¬¤·¤Æ¤ß¤Þ¤¹¤«¡©"
-
-#~ msgid "Small(%dMB)"
-#~ msgstr "ºÇ¾®(%dMB)"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "¥·¥¹¥Æ¥à¤Î¥â¥Ç¥à¤Ë¤è¤ë¥À¥¤¥¢¥ë¥¢¥Ã¥×¥Í¥Ã¥È¥ï¡¼¥¯¤òÀßÄꤷ¤Þ¤¹¤«¡©"
-
-#~ msgid "Do you want to configure a ISDN connection for your system?"
-#~ msgstr "¥·¥¹¥Æ¥à¤ÎISDNÀܳ¤òÀßÄꤷ¤Þ¤¹¤«¡©"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "PCI¥Ç¥Ð¥¤¥¹¤ò¤µ¤¬¤·¤Æ¤ß¤Þ¤¹¤«¡©"
-
-#~ msgid "Searching root partition."
-#~ msgstr "¥ë¡¼¥È¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¸¡º÷"
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: ¤³¤ì¤Ï¥ë¡¼¥È¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ç¤Ï¤¢¤ê¤Þ¤»¤ó¡¤¤Û¤«¤òÁª¤ó¤Ç²¼¤µ¤¤¡£"
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "¤É¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥ë¡¼¥È¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë¤·¤Þ¤¹¤«"
-
-#~ msgid "Autologin at startup"
-#~ msgstr "µ¯Æ°»þ¤Î¼«Æ°¥í¥°¥¤¥ó"
-
-#~ msgid "Autologin - Choose default user"
-#~ msgstr "¼«Æ°¥í¥°¥¤¥ó - ¥Ç¥Õ¥©¥ë¥È¥æ¡¼¥¶¤òÁªÂò"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "¥¦¥£¥ó¥É¥¦¥º¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Linux4Win¤¬Æþ¤ë¤À¤±¤Î¶õ¤­¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# When possible cp437 accentuated letters can be used too.
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "LILO operating system chooser-he youkosou!\n"
-#~ "\n"
-#~ "<TAB>: Ichiran Hyouji\n"
-#~ "\n"
-#~ "Ichiran kara erande <ENTER> wo oshimasu. %d byou de Default ni narimasu.\n"
-#~ "\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "SILO ¥á¥¤¥ó¥ª¥×¥·¥ç¥ó"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "SILO ¤Ë¤Ï°Ê²¼¤Î¥¨¥ó¥È¥ê¤¬¤¢¤ê¤Þ¤¹¡£\n"
-#~ "¤Û¤«¤Î¥¨¥ó¥È¥ê¤ò²Ã¤¨¤ë¤«Êѹ¹¤¹¤ë¤³¤È¤¬¤Ç¤­¤Þ¤¹¡£"
-
-#~ msgid "This label is already in use"
-#~ msgstr "¤³¤Î¥é¥Ù¥ë¤Ï¤¹¤Ç¤Ë»È¤ï¤ì¤Æ¤¤¤Þ¤¹"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "SILO ¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ë¼ºÇÔ¤·¤Þ¤·¤¿¡£°Ê²¼¤Î¥¨¥é¡¼¤¬È¯À¸:"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX ¤Ï¤Þ¤º¡¢PCI¥Ð¥¹¤ÎSCSI¥¢¥À¥×¥¿¤òõ¤·¤Ë¤¤¤­¤Þ¤¹¡£¥¢¥À¥×¥¿¤¬¤ß¤Ä\n"
-#~ "¤«¤Ã¤Æ¡¢»È¤¦¥É¥é¥¤¥Ð¤¬¤ï¤«¤ì¤Ð¡¢¤½¤ì¤ò¼«Æ°Åª¤ËÁȤ߹þ¤ß¤Þ¤¹¡£¥¢¥À¥×¥¿\n"
-#~ "¤¬¤¿¤¯¤µ¤ó¤¢¤Ã¤Æ¤âÂç¾æÉפǤ¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤â¤·ISA¥Ð¥¹¤ÎSCSI¥¢¥À¥×¥¿¤ò»È¤Ã¤Æ¤¤¤¿¤ê¡¢PCI¥Ð¥¹¤ÎSCSI¥¢¥À¥×¥¿¤Ç¤â\n"
-#~ "DrakX¤Ë¥É¥é¥¤¥Ð¤¬¤ï¤«¤é¤Ê¤«¤Ã¤¿¤ê¤¹¤ë¤È¤­¡¢¤Þ¤¿¤ÏSCSI¥¢¥À¥×¥¿¤¬¤Ê¤¤\n"
-#~ "¤È¤­¤Ë¤Ï¡¢¥×¥í¥ó¥×¥È¤¬½Ð¤Æ¤­¤Æ¡¢SCSI¥¢¥À¥×¥¿¤¬¤¢¤ë¤«¤É¤¦¤«¤­¤­¤Þ¤¹¡£\n"
-#~ "¤Ê¤±¤ì¤Ð¡Ö¤¤¤¤¤¨¡×¤ÈÅú¤¨¤Æ¤¯¤À¤µ¤¤¡£¤¢¤ì¤Ð¡Ö¤Ï¤¤¡×¤ÈÅú¤¨¤Þ¤·¤ç¤¦¡£\n"
-#~ "¤¹¤ë¤È¥É¥é¥¤¥Ð¤Î°ìÍ÷ɽ¤¬½Ð¤Æ¤¯¤ë¤Î¤Ç¡¢Å¬Àڤʤâ¤Î¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥É¥é¥¤¥Ð¤òÁª¤ó¤À¤é¡¢¤½¤Î¥É¥é¥¤¥Ð¤Ç¥ª¥×¥·¥ç¥ó¤ò»ØÄꤷ¤¿¤¤¤«¤É¤¦¤«¤ò\n"
-#~ "DrakX¤¬¤­¤¤¤Æ¤­¤Þ¤¹¡£ºÇ½é¤Ï¡¢¥É¥é¥¤¥Ð¤Ë¥Ï¡¼¥É¥¦¥§¥¢¤ò¥×¥í¡¼¥Ö¤µ¤»¤Æ\n"
-#~ "¤ß¤Þ¤·¤ç¤¦¡£¤¿¤¤¤¬¤¤¤Ï¤³¤ì¤Ç¤¦¤Þ¤¯¤¤¤­¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤³¤ì¤¬¥À¥á¤Ê¤é¡¢¤½¤Î¥¢¥À¥×¥¿¤Ë¤Ä¤¤¤Æ¥É¥­¥å¥á¥ó¥Æ¡¼¥·¥ç¥ó¤Ë½ñ¤¤¤Æ¤¢¤Ã¤¿\n"
-#~ "¤³¤È¤ä¡¢¥¦¥£¥ó¥É¥¦¥º¤Î¥×¥í¥Ñ¥Æ¥£¤Î¾ðÊó¤Ê¤É¤ò»×¤¤¤À¤·¤Æ¤ß¤Þ¤·¤ç¤¦¡£¥¤¥ó\n"
-#~ "¥¹¥È¡¼¥ë¥¬¥¤¥É¤Ç¤â¡¢¤³¤ì¤ò¹µ¤¨¤Æ¤ª¤¯¤è¤¦¤Ë¤ª¾©¤á¤·¤Þ¤·¤¿¤è¤Í¡£¤½¤Î¾ðÊó\n"
-#~ "¤ò¥É¥é¥¤¥Ð¤Ë¤ï¤¿¤·¤Æ¤ä¤ë¤³¤È¤Ë¤Ê¤ê¤Þ¤¹¡£"
-
-#~ msgid "Shutting down"
-#~ msgstr "¥·¥ã¥Ã¥È¥À¥¦¥óÃæ"
-
-#~ msgid "useless"
-#~ msgstr "̵ÍÑ"
-
-#~ msgid ""
-#~ "Some true type fonts from windows have been found on your computer.\n"
-#~ "Do you want to use them? Be sure you have the right to use them under "
-#~ "Linux."
-#~ msgstr ""
-#~ "¥³¥ó¥Ô¥å¡¼¥¿¾å¤Ë¥¦¥£¥ó¥É¥¦¥º¤«¤é¤Î True Type ¥Õ¥©¥ó¥È¤ò¸«ÉÕ¤±¤Þ¤·¤¿¡£\n"
-#~ "¤³¤ì¤é¤ò»È¤¤¤Þ¤¹¤«? ¤¢¤Ê¤¿¤¬ Linux ¾å¤Ç¤³¤ì¤é¤ò»È¤¦¸¢Íø¤¬¤¢¤ë¤«¤ò³Î¤«¤á¤Æ"
-#~ "²¼¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Linux¤Î¥¤¥ó¥¹¥È¡¼¥ë¤¬½é¤á¤Æ¤«¡¢¤Û¤«¤ÎLinux¥Ç¥£¥¹¥È¥ê¥Ó¥å¡¼¥·¥ç¥ó¤ä\n"
-#~ "¥Ð¡¼¥¸¥ç¥ó¤È¶¦Â¸¤µ¤»¤¿¤¤¤È¤­¤Ë¤Ï¡¢¡Ö¥¤¥ó¥¹¥È¡¼¥ë¡×¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "Mandrake Linux: 5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus),\n"
-#~ "6.1 (Helios), Gold 2000, 7.0 (Air)¤Ê¤É¡¢¸Å¤¤Mandrake Linux¤ò\n"
-#~ "¥¢¥Ã¥×¥°¥ì¡¼¥É¤¹¤ë¤Ê¤é¡Ö¥¢¥Ã¥×¥°¥ì¡¼¥É¡×¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£"
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "LILO ¤ò»È¤¤¤Þ¤¹¤«¡©"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "¤Ç¤Ï¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¥Ñ¥Ã¥±¡¼¥¸¤ÎÁªÂò¤Ë°Ü¤ê¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤Þ¤º¤Ï¡¢¥¤¥ó¥¹¥È¡¼¥ë¤ä¥¢¥Ã¥×¥°¥ì¡¼¥É¤·¤¿¤¤¥Ñ¥Ã¥±¡¼¥¸¤ò¤ª¤ª¤¶¤Ã¤Ñ¤Ë\n"
-#~ "¥°¥ë¡¼¥×¤ÇÁª¤Ó¤Þ¤¹¡£¤½¤Î¸å¤Ç¡¢¥Ñ¥Ã¥±¡¼¥¸¤Î¥µ¥¤¥º¤Ê¤É¤«¤é¤â¤Ã¤ÈºÙ¤«¤¤\n"
-#~ "ÁªÂò¤¬¤Ç¤­¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥¨¥­¥¹¥Ñ¡¼¥È¡¦¥â¡¼¥É¤Ê¤é¡¢¸ÄÊ̤Υѥ屡¼¥¸¤òÁª¤Ù¤Þ¤¹¡£\n"
-#~ "¥Ñ¥Ã¥±¡¼¥¸¤ÎÃæ¤Ë¤Ï¡¢Â¾¤Î¥Ñ¥Ã¥±¡¼¥¸¤¬¤Ê¤¤¤È»È¤¨¤Ê¤¤¤â¤Î¤¬¤¢¤ê¤Þ¤¹¡£\n"
-#~ "¤³¤ì¤ò¥Ñ¥Ã¥±¡¼¥¸¤Î°Í¸´Ø·¸¤È¤¤¤¤¤Þ¤¹¡£¤³¤³¤Ç¤Ï¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤Ö¤È¡¢\n"
-#~ "¤½¤ì¤ËɬÍפʥѥ屡¼¥¸¤â¼«Æ°Åª¤ËÁª¤Ð¤ì¤Æ¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Þ¤¹¡£\n"
-#~ "°Í¸´Ø·¸¤¬´°Á´¤Ë²ò·è¤µ¤ì¤Ê¤¤¤È¡¢¥Ñ¥Ã¥±¡¼¥¸¤Ï¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤­¤Þ¤»¤ó¡£"
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (LInux LOader) ¤Ï¡¢Linux¤ä¤½¤Î¾¤ÎOS¤ò¥Ö¡¼¥È¤Ç¤­¤Þ¤¹¡£\n"
-#~ "¥Ç¥£¥¹¥¯¾å¤Î³Æ¼ï¤ÎOS¤Ï¡¢ÉáÄ̤ϥ¤¥ó¥¹¥È¡¼¥ë¤ÎÃæ¤Ç¤­¤Á¤ó¤È¸¡½Ð¤µ¤ì¤Æ¤¤¤Þ"
-#~ "¤¹¡£\n"
-#~ "¤Ç¤â¸¡½Ð¤µ¤ì¤Æ¤¤¤Ê¤¤¤è¤¦¤Ê¤é¡¢¤³¤³¤ÇÄɲäǤ­¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤ß¤ó¤Ê¤Ë¥¢¥¯¥»¥¹¤·¤Æ¤Û¤·¤¯¤Ê¤¤OS¤¬¤¢¤Ã¤¿¤é¡¢¤³¤³¤«¤é¤Ïºï½ü¤·¤Æ¤ª¤­¤Þ¤¹¡£\n"
-#~ "¡Ê¤½¤ÎOS¤òΩ¤Á¾å¤²¤ë¤Ë¤Ï¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤¬É¬Íפˤʤê¤Þ¤¹¡Ë"
-
-#~ msgid ""
-#~ "Now that you've selected desired groups, please choose \n"
-#~ "how many packages you want, ranging from minimal to full \n"
-#~ "installation of each selected groups."
-#~ msgstr ""
-#~ "º£¡¢Íߤ·¤¤¥°¥ë¡¼¥×¤ÎÁªÂò¤ò¤·¤Æ¤ë¤È¤³¤í¤Ç¤¹¡£\n"
-#~ "ÁªÂò¤·¤¿¤½¤ì¤¾¤ì¤Î¥°¥ë¡¼¥×¤ÇºÇ¾®¡ÁºÇÂ祤¥ó¥¹¥È¥ì¡¼¥·¥ç¥ó¤ÎÈϰϤÇ\n"
-#~ "¤É¤Î¤¯¤é¤¤¤Î¥Ñ¥Ã¥±¡¼¥¸¤¬É¬Íפ«Áª¤ó¤Ç²¼¤µ¤¤¡£"
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤¤Â¾¤Î CD ¤òÁªÂò"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "¤³¤ó¤ÊÊý¿Ë¤òÌܰ¤ËÁª¤ó¤Ç¤¯¤À¤µ¤¤:\n"
-#~ "\n"
-#~ "  - ¿ä¾©: Linux¤Î¥¤¥ó¥¹¥È¡¼¥ë¤¬½é¤á¤Æ¤Ê¤é¤³¤ì¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥«¥¹¥¿¥àÁªÂò: Linux¤Ë¾Ü¤·¤±¤ì¤Ð¡¢¥·¥¹¥Æ¥à¤Î»È¤¤Êý¤Ë±þ¤¸¤Æ¡Ö¥Î¡¼¥Þ"
-#~ "¥ë¡×\n"
-#~ "¡Ö³«È¯Íѡס֥µ¡¼¥Ð¡×¤ÎÃ椫¤éÁª¤Ó¤Þ¤·¤ç¤¦¡£¤Õ¤Ä¤¦¤Î¥·¥¹¥Æ¥à¤Ë¤·¤¿¤±¤ì¤Ð¡¢\n"
-#~ "¡Ö¥Î¡¼¥Þ¥ë¡×¤¬¤¤¤¤¤Ç¤·¤ç¤¦¡£¼ç¤Ë¥½¥Õ¥È³«È¯¤ò¤¹¤ë¤Ä¤â¤ê¤Ê¤é¡¢¡Ö³«È¯Íѡפò\n"
-#~ "Áª¤Ó¤Þ¤¹¡£¤¢¤ë¤¤¤Ï¡¢ÈÆÍÑ¥µ¡¼¥Ð¡Ê¥á¡¼¥ëÍÑ¡¢°õºþÍѤʤɤʤɡˤȤ·¤Æ»È¤¦¤Ê¤é\n"
-#~ "¡Ö¥µ¡¼¥Ð¡×¤¬¤ª¤¹¤¹¤á¤Ç¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥¨¥­¥¹¥Ñ¡¼¥È¡§Expert: GNU/Linux ¥Ð¥ê¥Ð¥ê¤Ç¡¢ºÙ¤«¤¤¥«¥¹¥¿¥Þ¥¤¥º¤ò¤·¤¿\n"
-#~ "¤±¤ì¤Ð¡¢¤³¤Î¥¤¥ó¥¹¥È¡¼¥ë¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£¤³¤Î¤È¤­¡¢¥·¥¹¥Æ¥à¤Î»ÈÅÓ¤Ï\n"
-#~ "¡Ö¥«¥¹¥¿¥Þ¥¤¥º¡×¤Ë¤Ê¤ê¤Þ¤¹¡£"
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "°Å¹æ´ØÏ¢¤Î¥Ñ¥Ã¥±¡¼¥¸¤ò¥À¥¦¥ó¥í¡¼¥ÉÃæ"
-
-#~ msgid "Setup SCSI"
-#~ msgstr "SCSI ¤ÎÀßÄê"
-
-#~ msgid "Installation CD Nr %s"
-#~ msgstr "¥¤¥ó¥¹¥È¥ì¡¼¥·¥ç¥ó CD Nr %s"
-
-#~ msgid "Which language do you want?"
-#~ msgstr "¤É¤Î¸À¸ì¤ò»È¤¤¤Þ¤¹¤«¡©"
-
-#~ msgid "Which packages do you want to install"
-#~ msgstr "¤É¤Î¥Ñ¥Ã¥±¡¼¥¸¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¤«"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "¤É¤Î»ÈÍÑË¡¤òÁª¤Ó¤Þ¤¹¤«¡©"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "ƳÆþ/³ÈÄ¥¤ÎÁªÂò"
-
-#~ msgid "A entry %s already exists"
-#~ msgstr "¥¨¥ó¥È¥ê %s ¤Ï¤¹¤Ç¤Ë¸ºß¤·¤Þ¤¹"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "HTP ¤Î»È¤¨¤ë¥Ö¡¼¥È¥Ç¥£¥¹¥¯ÍѤΥեí¥Ã¥Ô¡¼¤ò¥É¥é¥¤¥Ö¤ËÁÞÆþ¤·¤Æ¤¯¤À¤µ¤¤\n"
-#~ "¥Õ¥í¥Ã¥Ô¡¼¾å¤ÎÁ´¤Æ¤Î¥Ç¡¼¥¿¤Ï¼º¤ï¤ì¤Þ¤¹"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "¥Õ¥í¥Ã¥Ô¡¼¤Çµ¯Æ°¤·¤Æ¥¤¥ó¥¹¥È¡¼¥ë¤ò¤ä¤ê¤Ê¤ª¤·¤Æ¤¯¤À¤µ¤¤"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "¥Ñ¥é¥á¡¼¥¿¤òÊѤ¨¤Æ¥¤¥ó¥¹¥È¡¼¥ë¤ò¤ä¤ê¤Ê¤ª¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "HTP ¥Ö¡¼¥È¥Õ¥í¥Ã¥Ô¡¼¤¬¤Ä¤¯¤ì¤Þ¤»¤ó¤Ç¤·¤¿¡£\n"
-#~ "¥¤¥ó¥¹¥È¡¼¥ë¤ò¤ä¤ê¤Ê¤ª¤·¤Æ¡¢¥×¥í¥ó¥×¥È¤Ç¡È%s¡É¤ÈÆþÎϤ·¤Æ¤ß¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid "User name:"
-#~ msgstr "¥æ¡¼¥¶Ì¾:"
-
-#~ msgid "Password:"
-#~ msgstr "¥Ñ¥¹¥ï¡¼¥É:"
-
-#~ msgid "expert"
-#~ msgstr "¥¨¥­¥¹¥Ñ¡¼¥È"
-
-#~ msgid "developer"
-#~ msgstr "³«È¯¼Ô"
-
-#~ msgid "beginner"
-#~ msgstr "½é¿´¼Ô"
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "¥ê¥Ë¥¢ (SCSI ¥É¥é¥¤¥Ö¤Î°ìÉô¤ÇɬÍ×)"
-
-#~ msgid "linear"
-#~ msgstr "¥ê¥Ë¥¢"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "%s ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤«¤é %s,"
-
-#~ msgid "changing type of"
-#~ msgstr "¥¿¥¤¥×¤ÎÊѹ¹"
-
-#~ msgid "formatting"
-#~ msgstr "¥Õ¥©¡¼¥Þ¥Ã¥ÈÃæ"
-
-#~ msgid "resizing"
-#~ msgstr "¥ê¥µ¥¤¥ºÃæ"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "¥µ¥¤¥º: %s MB"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "ÉÔÀµ¤Ê¥­¥Ã¥¯¥¹¥¿¡¼¥È¥Õ¥¡¥¤¥ë %s (%s ¼ºÇÔ)"
-
-#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
-#~ msgstr "Áª¤ó¤À¥Ñ¥Ã¥±¡¼¥¸¤¬Â¿¤¹¤®¤Þ¤¹¡£%dMB ¤¢¤ë¤Î¤Ç %dMB ¤Ë¤ª¤µ¤Þ¤ê¤Þ¤»¤ó¡£"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr "%d MB ¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¡£¤Û¤«¤Î¥×¥í¥°¥é¥à¤ò¥¤¥ó¥¹¥È¡¼¥ë½ÐÍè¤Þ¤¹"
-
-#~ msgid "Installation CD Nr 1"
-#~ msgstr "¥¤¥ó¥¹¥È¥ì¡¼¥·¥ç¥ó CD Nr 1"
-
-#~ msgid "Local LAN"
-#~ msgstr "¥í¡¼¥«¥ë LAN"
diff --git a/perl-install/share/po/ko.po b/perl-install/share/po/ko.po
deleted file mode 100644
index 49e2c94a4..000000000
--- a/perl-install/share/po/ko.po
+++ /dev/null
@@ -1,8718 +0,0 @@
-# Korean translation of DrakeX.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-# sangkim@dreamwiz.com, 1999.
-# Ricky Jang <ricky@iolinux.co.kr>, 2000
-# Jaegeum Choe <baedaron@hananet.net>, 2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX 1.1.5\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-09-24 01:16--500\n"
-"Last-Translator: Jaegeum Choe <baedaron@hananet.net>\n"
-"Language-Team: Korean <baedaron@hananet.net>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=euc-kr\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "¸ðµç Çìµå¸¦ µ¶¸³ÀûÀ¸·Î ¼³Á¤"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Xinerama È®Àå »ç¿ë"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "¡¸%s¡¹Ä«µå¸¸ ¼³Á¤ (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "´ÙÁß Çìµå ¼³Á¤"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"´ÔÀÇ ½Ã½ºÅÛÀº ´ÙÁß Çìµå ¼³Á¤À» Áö¿øÇÕ´Ï´Ù.\n"
-"¾î¶»°Ô ÇϽðڽÀ´Ï±î?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "±×·¡ÇÈ Ä«µå"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "±×·¡ÇÈ Ä«µå ¼±ÅÃ"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "X ¼­¹ö ¼±ÅÃ"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X ¼­¹ö"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "¾î´À XFree ¼³Á¤À» ¼±ÅÃÇϽðڽÀ´Ï±î?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"´ÔÀÇ Ä«µå´Â XFree %s·Î¸¸ °¡´ÉÇÑ 3D Çϵå¿þ¾î °¡¼Ó±â´ÉÀÌ Áö¿øµË´Ï´Ù.\n"
-"´ÔÀÇ Ä«µå´Â ¾î¼¸é º¸´Ù Çâ»óµÈ 2D ¼º´ÉÀ» º¸ÀÏ ¼ö ÀÖ´Â XFree %sÀ» Áö¿øÇÕ´Ï´Ù."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "´ÔÀÇ Ä«µå´Â XFree %s·Î 3D Çϵå¿þ¾î °¡¼Ó±â´ÉÀ» Áö¿øÇÕ´Ï´Ù."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s¸¦ »ç¿ëÇÑ 3D Çϵå¿þ¾î °¡¼Ó"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"´ÔÀÇ Ä«µå´Â XFree %s·Î¸¸ °¡´ÉÇÑ 3D Çϵå¿þ¾î °¡¼Ó±â´ÉÀÌ Áö¿øµË´Ï´Ù.\n"
-"ÁÖÀÇ: ÀÌ°ÍÀº ½ÇÇèÀûÀÎ Áö¿øÀÌ¸ç ´ÔÀÇ ÄÄÇ»Å͸¦ ¸ØÃß°Ô ÇÒ ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s¸¦ »ç¿ëÇÑ ½ÇÇèÀû 3D Çϵå¿þ¾î °¡¼Ó"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"´ÔÀÇ Ä«µå´Â XFree %s·Î¸¸ °¡´ÉÇÑ 3D Çϵå¿þ¾î °¡¼Ó±â´ÉÀÌ Áö¿øµË´Ï´Ù.\n"
-"ÁÖÀÇ: ÀÌ°ÍÀº ½ÇÇèÀûÀÎ Áö¿øÀÌ¸ç ´ÔÀÇ ÄÄÇ»Å͸¦ ¸ØÃß°Ô ÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-"´ÔÀÇ Ä«µå´Â ¾î¼¸é º¸´Ù Çâ»óµÈ 2D ¼º´ÉÀ» º¸ÀÏ ¼ö ÀÖ´Â XFree %sÀ» Áö¿øÇÕ´Ï´Ù."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (¼³Ä¡ Ç¥½Ã µå¶óÀ̹ö)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree ¼³Á¤"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "±×·¡ÇÈ Ä«µåÀÇ ¸Þ¸ð¸® ¿ë·®À» ¼±ÅÃÇϼ¼¿ä"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "¼­¹ö ¿É¼ÇÀ» ¼±ÅÃÇϼ¼¿ä"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "¸ð´ÏÅ͸¦ ¼±ÅÃÇϼ¼¿ä"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "¸ð´ÏÅÍ"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"¼öÁ÷ ±×¸®°í ´õ¿í Áß¿äÇÑ ¼öÆò ÁÖÆļö¶ó´Â µÎ °³ÀÇ Áß¿äÇÑ ÀÎÀÚ°¡ ÀÖ½À´Ï´Ù. ¼öÁ÷ "
-"ÁÖÆļö´Â \n"
-"Àüüȭ¸éÀÌ °»½ÅµÇ´Â ÁÖ±âÀ̸ç, ¼öÆò ÁÖÆļö´Â ½ºÄµ¶óÀεéÀÌ °»½ÅµÇ´Â ÁÖ±âÀÔ´Ï"
-"´Ù.\n"
-"\n"
-"¸Å¿ì Áß¿ä: ´ÔÀÇ ½ÇÁ¦ ¸ð´ÏÅÍÀÇ ´É·ÂÄ¡¸¦ ³Ñ¾î¼­´Â ¸ðµ¨À» ¼±ÅÃÇÏÁö ¸¶¼¼¿ä: \n"
-"´ÔÀÇ ¸ð´ÏÅÍ°¡ ÈÑ¼ÕµÉ ¼ö ÀÖ½À´Ï´Ù.\n"
-"Àß ¸ð¸£°Ú´Ù¸é, ¾ÈÀüÇÏ°Ô ³·Àº ¼³Á¤°ªÀ» ¼±ÅÃÇϼ¼¿ä"
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "¼öÆò ÁÖÆļö"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "¼öÁ÷ ÁÖÆļö"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "¸ð´ÏÅÍ°¡ ¼³Á¤µÇÁö ¾Ê¾Ò½À´Ï´Ù."
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "±×·¡ÇÈ Ä«µå°¡ ¾ÆÁ÷ ¼³Á¤µÇÁö ¾Ê¾Ò½À´Ï´Ù."
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Çػ󵵰¡ ¼±ÅõÇÁö ¾Ê¾Ò½À´Ï´Ù."
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "ÀÌ ¼³Á¤À» Å×½ºÆ®ÇØ º¸½Ã°Ú½À´Ï±î?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "ÁÖÀÇ : ÀÌ ±×·¡ÇÈ Ä«µå¸¦ Å×½ºÆ®Çϸé ÄÄÇ»ÅÍ°¡ ¸ØÃâÁöµµ ¸ð¸¨´Ï´Ù."
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "¼³Á¤ Å×½ºÆ®"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"ÀϺΠÀÎÀÚ°ªµéÀ» º¯°æÇØ º¸¼¼¿ä."
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "¿À·ù°¡ ¹ß»ýÇß½À´Ï´Ù:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d ÃÊ ³²¾Ò½À´Ï´Ù."
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "ÀÌ ¼³Á¤ÀÌ ¸Â½À´Ï±î?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "¿À·ù°¡ ¹ß»ýÇß½À´Ï´Ù. ÀϺΠÀÎÀÚ°ªÀ» º¯°æÇØ º¸¼¼¿ä."
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "ÇØ»óµµ"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "ÇØ»óµµ¿Í »ö»óÀ» ¼±ÅÃÇϼ¼¿ä"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "±×·¡ÇÈ Ä«µå: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 ¼­¹ö: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Àü¹®°¡ ¸ðµå"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "¸ðµÎ Ç¥½Ã"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "ÇØ»óµµ"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Å°º¸µå ÇüÅÂ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "¸¶¿ì½º Á¾·ù: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "¸¶¿ì½º ÀåÄ¡: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "¸ð´ÏÅÍ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "¸ð´ÏÅÍ ¼öÆòÁÖÆļö: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "¸ð´ÏÅÍ ¼öÁ÷ÁÖÆļö: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "±×·¡ÇÈ Ä«µå: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "±×·¡ÇÈ Ä«µå ID: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "ºñµð¿À ¸Þ¸ð¸®: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "»ö»ó ½Éµµ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "ÇØ»óµµ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 ¼­¹ö: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 µå¶óÀ̹ö: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "X-Window ¼³Á¤ ÁغñÁß"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "¾î¶»°Ô ÇϽðڽÀ´Ï±î?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "¸ð´ÏÅÍ º¯°æ"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "±×·¡ÇÈ Ä«µå º¯°æ"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "¼­¹ö ¿É¼Ç º¯°æ"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "ÇØ»óµµ º¯°æ"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Á¤º¸ º¸±â"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "´Ù½Ã Å×½ºÆ®"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Á¾·á"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"º¯°æ»çÇ×À» ÀúÀåÇÒ±î¿ä?\n"
-"ÇöÀç ¼³Á¤:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "º¯°æ»çÇ×À» Àû¿ëÇÏ·Á¸é %s·Î Àç·Î±×ÀÎ Çϼ¼¿ä."
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "·Î±×¾Æ¿ôÇÏ°í Crtl-Alt-BackSpaceÅ°¸¦ ´©¸£¼¼¿ä."
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "½ÃÀ۽à ¹Ù·Î X ½ÇÇà"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"ºÎÆýÿ¡ ÀÚµ¿À¸·Î XÀ©µµ¿ì°¡ ½ÃÀ۵ǵµ·Ï ÇÒ¼ö ÀÖ½À´Ï´Ù.\n"
-"´Ù½Ã ºÎÆÃÇßÀ»¶§ ÀÚµ¿À¸·Î XÀ©µµ°¡ ½ÃÀÛµÇ±æ ¿øÇϼ¼¿ä?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 »ö»ó (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "3¸¸2õ »ö»ó (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "6¸¸5õ »ö»ó (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "õ6¹é¸¸ »ö»ó  (24bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "40¾ï »ö»ó (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "16 MB ÀÌ»ó"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Ç¥ÁØ VGA, 640x480 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "½´ÆÛ VGA, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 ȣȯ, 1024x768 @ 87 Hz interlaced (800x600 ¾ÈµÊ)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "½´ÆÛ VGA, 1024x768 @ 87 Hz interlaced, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "È®Àå ½´ÆÛ VGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "ºñÀÎÅÍ·¹À̽º SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "°íÁÖÆļö SVGA,  1024x768 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "1280x1024 @ 60 Hz Áö¿ø ´ÙÁßÁÖÆļö ¸ð´ÏÅÍ"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "1280x1024 @ 74 Hz Áö¿ø ´ÙÁßÁÖÆļö ¸ð´ÏÅÍ"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "1280x1024 @ 76 Hz Áö¿ø ´ÙÁßÁÖÆļö ¸ð´ÏÅÍ"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "1600x1200 @ 70 Hz »ç¿ë °¡´É ¸ð´ÏÅÍ"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "1600x1200 @ 76 Hz »ç¿ë °¡´É ¸ð´ÏÅÍ"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "ºÎÆ® ÆÄƼ¼ÇÀÇ Ã¹¹ø° ¼½ÅÍ"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "µå¶óÀ̺êÀÇ Ã¹¹ø° ¼½ÅÍ(MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILO ¼³Ä¡"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "ºÎÆ®·Î´õ¸¦ ¾îµð¿¡ ¼³Ä¡ÇÏ°í ½ÍÀ¸¼¼¿ä?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "LILO/GRUB ¼³Ä¡"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "ÅؽºÆ® ¸Þ´º LILO"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "±×·¡ÇÈ ¸Þ´º LILO"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "µµ½º/À©µµ¿ìÁî¿¡¼­ ºÎÆÃ(loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "ºÎÆ®·Î´õ ÁÖ ¿É¼Çµé"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "»ç¿ëÇÒ ºÎÆ®·Î´õ"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "ºÎÆ®·Î´õ ¼³Ä¡"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "ºÎÆ® ÀåÄ¡"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (¿À·¡µÈ BIOSµé¿¡¼± ÀÛµ¿ÇÏÁö ¾ÊÀ»¼öµµ ÀÖ½À´Ï´Ù.)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "ÄÞÆÑµå ¸ðµå"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "ÄÞÆÑÆ® ¸ðµå"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "ºñµð¿À ¸ðµå"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "±âº» À̹ÌÁö·Î ºÎÆÃµÉ ¶§±îÁö Áö¿¬½Ã°£"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "¾ÏÈ£"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "¾ÏÈ£ (È®ÀÎ)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "¸í·ÉÇà ¿É¼ÇÀ» Á¦ÇÑÇÕ´Ï´Ù."
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "Á¦ÇÑ"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "ºÎÆýà /tmp µð·ºÅ丮 ÀÚµ¿ û¼Ò"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "¿É¼Ç: Á¤È®ÇÑ ¸Þ¸ð¸® ¿ë·® (%d MB ¹ß°ß)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "´ÙÁß profiles Çã¿ë"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "¸Þ¸ð¸® ¿ë·®¸¦ MB·Î ÀÔ·ÂÇϼ¼¿ä"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "¿É¼Ç: ¡¸¸í·ÉÇà ¿É¼ÇÁ¦ÇÑ¡¹Àº ¾ÏÈ£¾øÀÌ »ç¿ëµÉ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "´Ù½Ã ½ÃµµÇϼ¼¿ä."
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "¾ÏÈ£°¡ ÀÏÄ¡ÇÏÁö ¾Ê½À´Ï´Ù."
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "ÃʱâÈ­ ¸Þ½ÃÁö"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Æß¿þ¾î ¿­±â Áö¿¬"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Ä¿³Î ºÎÆ® Á¦Çѽð£"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "CD ºÎÆà Çã¿ë?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "OF ºÎÆà Çã¿ë?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "񃧯 OS?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"¸î °¡Áö Ç׸ñÀÌ ¿©±â¿¡ Ç¥½ÃµÇ°í ÀÖ½À´Ï´Ù.\n"
-"´õ Ãß°¡Çϰųª, ±âÁ¸ÀÇ °ÍµéÀ» ¼öÁ¤ÇÒ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Ãß°¡"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "¿Ï·á"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "º¯°æ"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "¾î¶² Á¾·ùÀÇ Ç׸ñÀ» Ãß°¡ÇϽðڽÀ´Ï±î?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "¸®´ª½º"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "±âŸ OS (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "±âŸ OS (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "±âŸ OS (windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "À̹ÌÁö"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "·çÆ®"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Ãß°¡"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "ÃʱâÈ­ ·¥µð½ºÅ©"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Àбâ-¾²±â"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Å×À̺í"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "À§Çè"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Ç׸ñ¸í"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "±âº»°ª"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "·¥µð½ºÅ© ¿ë·®"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "ºñµð¿À ¾øÀ½"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Ç׸ñ Á¦°Å"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "ºó Ç׸ñ¸íÀº Çã¿ëµÇÁö ¾Ê½À´Ï´Ù."
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "ÀÌ Ç׸ñ¸íÀº ÀÌ¹Ì »ç¿ëµÇ°í ÀÖ½À´Ï´Ù."
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s ÀÎÅÍÆäÀ̽º°¡ °¨ÁöµÇ¾ú½À´Ï´Ù."
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "¶Ç ´Ù¸¥°ÍÀÌ ¼³Ä¡µÇ¾î ÀÖ½À´Ï±î?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "¶Ç ´Ù¸¥ %s ÀÎÅÍÆäÀ̽º°¡ ¼³Ä¡µÇ¾î ÀÖ½À´Ï±î?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "¾Æ´Ï¿À"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "¿¹"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Çϵå¿þ¾î Á¤º¸ º¸±â"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%sÄ«µå µå¶óÀ̹ö %s ¼³Ä¡Áß"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(%s ¸ðµâ »ç¿ë)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "¾î¶² %s µå¶óÀ̹ö¸¦ ½ÃµµÇØ º¾´Ï±î?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"ÀϹÝÀûÀ¸·Î %s µå¶óÀ̹ö´Â Ãß°¡ Á¤º¸ ¾øÀ̵µ Àß ÀÛµ¿ÇÏÁö¸¸, ¾î¶² °æ¿ì¿¡´Â \n"
-"Ãß°¡ Á¤º¸¸¦ ÇÊ¿ä·Î Çϱ⵵ ÇÕ´Ï´Ù. Ãß°¡ ¿É¼ÇÀ» ÁöÁ¤ÇϽðڽÀ´Ï±î, ¾Æ´Ï¸é \n"
-"ÇÊ¿äÇÑ Á¤º¸¸¦ ÀÚµ¿°Ë»öÇÏ°Ô ÇÏ°Ú½À´Ï±î?\n"
-"ÀÚµ¿°Ë»öÀº ¾î¼´Ù°¡ ÄÄÇ»Å͸¦ ¸ØÃß°Ô ÇÒ ¼öµµ ÀÖ½À´Ï´Ù.ÇÏÁö¸¸,\n"
-"ÀåÄ¡¸¦ ÈѼÕÇÏÁö´Â ¾Ê½À´Ï´Ù."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "ÀÚµ¿°Ë»ö"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "¿É¼Ç ÁöÁ¤"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "ÀÌÁ¦ %s µå¶óÀ̹ö¿¡ ¿É¼ÇÀ» ÁöÁ¤ÇÒ ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"ÀÌÁ¦ %s µå¶óÀ̹ö¿¡ ¿É¼ÇÀ» ÁöÁ¤ÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-"¿É¼ÇÀº ``À̸§=°ª À̸§2=°ª2 ...''Çü½ÄÀ¸·Î ÁöÁ¤ÇÕ´Ï´Ù..\n"
-"°¡·É, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "¸ðµâ ¿É¼Çµé:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"%s ¸ðµâÀ» ÀоîµéÀ̴µ¥ ½ÇÆÐÇß½À´Ï´Ù.\n"
-"´Ù¸¥ °ªÀ¸·Î ´Ù½Ã ½ÃµµÇØ º¸½Ã°Ú½À´Ï±î?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(ÀÌ¹Ì %s´Â(Àº) Ãß°¡µÇ¾ú½À´Ï´Ù.)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "ÀÌ ¾ÏÈ£´Â ³Ê¹« ´Ü¼øÇÕ´Ï´Ù."
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "»ç¿ëÀÚ¸íÀ» ÀÔ·ÂÇØ ÁÖ¼¼¿ä"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "»ç¿ëÀÚ¸íÀº ¿µ¹® ¼Ò¹®ÀÚ³ª ¼ýÀÚ, '-' ±×¸®°í '_' ¸¸ Æ÷ÇԵɼö ÀÖ½À´Ï´Ù."
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "ÀÌ »ç¿ëÀÚ¸íÀº ÀÌ¹Ì Ãß°¡µÇ¾î ÀÖ½À´Ï´Ù."
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "»ç¿ëÀÚ Ãß°¡"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"»ç¿ëÀÚ ÀÔ·Â\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "»ç¿ëÀÚ Çã°¡"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "½ÇÁ¦ À̸§"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "»ç¿ëÀÚ¸í"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "¸í·É Çؼ®±â"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "¾ÆÀÌÄÜ"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "ÀÚµ¿·Î±×ÀÎ"
-
-#: ../../any.pm_.c:757
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"ÀÚµ¿À¸·Î ƯÁ¤ »ç¿ëÀڷμ­ ·Î±×Àεǵµ·Ï ÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-"ÀÌ·± Ư¼ºÀ» ¿øÇϼ¼¿ä?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "±âº» »ç¿ëÀÚ¸¦ ¼±ÅÃÇϼ¼¿ä:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "»ç¿ëÇÒ À©µµ¿ì ¸Å´ÏÀú¸¦ ¼±ÅÃÇϼ¼¿ä:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "»ç¿ëÇÒ ¾ð¾î¸¦ ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "¼³Ä¡ÈÄ ´Ù¸¥ ´Ù¸¥ ¾ð¾î¸¦ ¼±ÅÃÇÒ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "¸ðµÎ"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"%s ¿î¿µÃ¼Á¦ ¼±Åñ⿡ ¿À½Å °ÍÀ» ȯ¿µÇÕ´Ï´Ù!\n"
-"\n"
-"À§ ¸®½ºÆ®¿¡¼­ ¿î¿µÃ¼Á¦¸¦ ¼±ÅÃÇϼ¼¿ä.\n"
-"±×·¸Áö ¾ÊÀ¸¸é %dÃÊ ÈÄ¿¡ ±âº»°ªÀ¸·Î ºÎÆÃÇÕ´Ï´Ù.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "¿î¿µÃ¼Á¦ ¼±ÅÃÀÚ GRUB¿¡ ¿À½Å°É ȯ¿µÇÕ´Ï´Ù."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "%cÅ°¿Í %c¸¦ »ç¿ëÇÏ¿© ¹ÝÀüµÈ Ç׸ñÀ» ¼±ÅÃÇϼ¼¿ä."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "¼±ÅÃµÈ ¿î¿µÃ¼Á¦·Î ºÎÆÃÇÒ·Á¸é ¿£Å͸¦, ¼öÁ¤ÇÒ·Á¸é 'e'¸¦ ´­·¯ÁÖ¼¼¿ä."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ºÎÆÃÀü ¸í·Éµé ¶Ç´Â, ¸í·ÉÇàÀ» À§Çؼ­´Â 'c'´­·¯ÁÖ¼¼¿ä."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "¹ÝÀüµÈ Ç׸ñÀ¸·Î %dÃÊÈÄ ÀÚµ¿À¸·Î ºÎÆõ˴ϴÙ."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "/boot¿¡ °ø°£ÀÌ ºÎÁ·ÇÕ´Ï´Ù."
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "µ¥½ºÅ©Å¾"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "½ÃÀÛ ¸Þ´º"
-
-#: ../../bootloader.pm_.c:972
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "¡¸%s¡¹ÆÄƼ¼Ç¿¡ ºÎÆ®·Î´õ¸¦ ¼³Ä¡ÇÒ ¼ö ¾ø½À´Ï´Ù.\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "¾ÆÁ÷ µµ¿ò¸»ÀÌ ÁغñµÇÁö ¾Ê¾Ò½À´Ï´Ù.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "ºÎÆà ½ºÅ¸ÀÏ ¼³Á¤"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/ÆÄÀÏ(_F)"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/ÆÄÀÏ(F)/Á¾·á(_Q)"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "»õ ½ºÅ¸ÀÏ ¹üÁÖÈ­ ¸ð´ÏÅÍ"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "»õ ½ºÅ¸ÀÏ ¸ð´ÏÅÍ"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "ÀüÅëÀû ¸ð´ÏÅÍ"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "ÀüÅëÀû GTK+ ¸ð´ÏÅÍ"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "ºÎÆýà ¿À·Î¶ó ½ÇÇà"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "LILO/Grub ¸ðµå"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"ÇöÀç ºÎÆ® °ü¸®ÀÚ·Î %s¸¦ »ç¿ëÇÏ°í ÀÖ½À´Ï´Ù.\n"
-"¼³Á¤ ¸¶¹ý»ç¸¦ ½ÇÇàÇÏ·Á¸é ¡¸¼³Á¤¡¹À» ´©¸£¼¼¿ä."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "¼³Á¤"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "ºÎÆ® ¸ðµå"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "½Ã½ºÅÛ ¸ðµå"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "½ÃÀÛÇÒ ¶§ X-Window ½ÇÇà"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "¾Æ´Ï¿À, ÀÚµ¿·Î±×ÀÎÀ» »ç¿ëÇÏÁö ¾Ê½À´Ï´Ù."
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "¿¹, ÀÚµ¿·Î±×ÀÎÀ» »ç¿ëÇÕ´Ï´Ù."
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "È®ÀÎ"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Ãë¼Ò"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "¡¸/etc/inittab¡¹ÆÄÀÏÀ» ÀÐÀ» ¼ö ¾ø½À´Ï´Ù: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "LILO ¼³Ä¡ ½ÇÆÐ. ´ÙÀ½°ú °°Àº ¿À·ù°¡ ¹ß»ýÇß½À´Ï´Ù:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d ºÐ"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 ºÐ"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d ÃÊ"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "¸ÕÀú µ¥ÀÌÅ͸¦ ¹é¾÷Çϼ¼¿ä."
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "ÁÖÀDZí°Ô ÀÐÀ¸¼¼¿ä!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"¸¸¾à aboot¸¦ »ç¿ëÇÒ °èȹÀ̶ó¸é, µð½ºÅ©ÀÇ ½ÃÀۺκп¡ ÃæºÐÇÑ °ø°£ (2048 ¼½ÅÍ "
-"¸é ÃæºÐÇÔ)\n"
-"À» ³²±âµµ·Ï ÁÖÀÇÇϼ¼¿ä."
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "¿À·ù"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "¸¶¹ý»ç"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "»õ·Î ¸¸µé±â"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "¿ø°Ý"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "¸¶¿îÆ® À§Ä¡"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "¿É¼Çµé"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "À¯Çü"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "¾ð¸¶¿îÆ®"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "¸¶¿îÆ®"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "ÇൿÀ» ¼±ÅÃÇϼ¼¿ä"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"ÇϳªÀÇ Å« µµ½º ÆÄƼ¼ÇÀ» °¡Áö°í ÀÖ½À´Ï´Ù.\n"
-"(ÀϹÝÀûÀ¸·Î ¸¶ÀÌÅ©·Î¼ÒÇÁÆ®ÀÇ µµ½º/À©µµ¿ìÁî¿¡¼­ »ç¿ë).\n"
-"¸ÕÀú ±× ÆÄƼ¼ÇÀÇ Å©±â¸¦ Á¶Á¤ÇÒ °ÍÀ» ±ÇÀåÇÕ´Ï´Ù.\n"
-"(±×°ÍÀ» Ŭ¸¯ÇÑÈÄ, \"Å©±âÁ¶Á¤\"À» Ŭ¸¯Çϼ¼¿ä.)"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "ÆÄƼ¼ÇÀ» Ŭ¸¯Çϼ¼¿ä"
-
-#: ../../diskdrake.pm_.c:240
-msgid "Please click on a media"
-msgstr "¸Åü¸¦ Ŭ¸¯Çϼ¼¿ä."
-
-#: ../../diskdrake.pm_.c:243
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr ""
-"À§ÀÇ ¹öÆ° Áß Çϳª¸¦ ´©¸£°Å³ª,\n"
-"\n"
-"¡¸»õ·Î ¸¸µé±â¡¹¸¦ ÀÌ¿ëÇϼ¼¿ä."
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr "¡¸»õ·Î ¸¸µé±â¡¹»ç¿ë"
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "»ó¼¼¼³¸í"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Journalised FS"
-msgstr "Àú³ÎÈ­ FS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "½º¿Ò"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "ºó°ø°£"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "±âŸ"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "ÆÄÀϽýºÅÛ À¯Çü:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "»ý¼º"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "´ë½Å¿¡ ¡¸%s¡¹¸¦ »ç¿ëÇÕ´Ï´Ù"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "»èÁ¦"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "¡¸¾ð¸¶¿îÆ®¡¹¸¦ ¸ÕÀú »ç¿ëÇϼ¼¿ä"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "%sÀÇ ÆÄƼ¼Ç À¯ÇüÀ» º¯°æÈÄ ÀÌ ÆÄƼ¼Ç³»ÀÇ ¸ðµç ÀڷḦ ÀÒ°Ô µË´Ï´Ù."
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "ÀåÄ¡ %s¸¦ ¾îµð¿¡ ¸¶¿îÆ® ÇϽðڽÀ´Ï±î?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "¸¶¿îÆ® ¿É¼Çµé:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "´Ù¾çÇÑ"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "Å»Âø½Ä ¹Ìµð¾î"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "À¯Çü º¯°æ"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "¾î¶² ÆÄÀÏ ½Ã½ºÅÛÀ» ¿øÇϼ¼¿ä?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "À¯È¿ÇÑ NFS °øÀ¯ÀÚ¿ø °Ë»ö Áß"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "¼­¹ö %s»óÀÇ À¯È¿ÇÑ NFS °øÀ¯ÀÚ¿ø °Ë»ö Áß"
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr "¸¸¾à À§¿¡¼­ ¿øÇÏ´Â Ç׸ñÀ» ãÀ» ¼ö ¾ø´Ù¸é, ¿©±â¿¡ ÀÔ·ÂÇϼ¼¿ä:"
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "¼­¹ö"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "°øÀ¯µÈ ÀÚ¿ø"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "À¯È¿ÇÑ »ï¹Ù °øÀ¯ÀÚ¿ø °Ë»ö Áß"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "¼­¹ö %s»óÀÇ À¯È¿ÇÑ »ï¹Ù °øÀ¯ÀÚ¿ø °Ë»ö Áß"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "ÆÄƼ¼Ç ¼±ÅÃ"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Ãß°¡ ÆÄƼ¼Ç ¼±ÅÃ"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Á¾·á"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Àü¹®°¡ ¸ðµå·Î Àüȯ"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "ÀÏ¹Ý ¸ðµå·Î Àüȯ"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "µÇµ¹¸®±â"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "°è¼ÓÇϽðڽÀ´Ï±î?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "ÀúÀåÇÏÁö ¾Ê°í Á¾·áÇϽðڽÀ´Ï±î?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "ÆÄƼ¼ÇÀ» ±â·ÏÇÏÁö ¾Ê°í Á¾·áÇϽðڽÀ´Ï±î?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "¡¸/etc/fstab¡¹ÀÇ º¯°æ»çÇ×À» ÀúÀåÇϽðڽÀ´Ï±î?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "ÀÚµ¿ ÇÒ´ç"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "¸ðµÎ »èÁ¦"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Ãß°¡ ¿É¼Ç"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "ÇÏµå µð½ºÅ© Á¤º¸"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "ÀÚµ¿ÇÒ´çÀ» »ç¿ëÇϱ⿡´Â °ø°£ÀÌ ºÎÁ·ÇÕ´Ï´Ù."
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "¸ðµç ÁÖÆÄƼ¼ÇÀÌ »ç¿ëÁßÀÔ´Ï´Ù."
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "´õÀÌ»ó ÆÄƼ¼ÇÀ» Ãß°¡ÇÒ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"´õ ¸¹Àº ÆÄƼ¼ÇÀ» ¸¸µå½Ç·Á¸é, È®Àå ÆÄƼ¼ÇÀ» ¸¸µé¼ö ÀÖµµ·Ï ÁÖÆÄƼ¼Ç Çϳª¸¦ Áö¿ì"
-"¼¼¿ä."
-
-#: ../../diskdrake_interactive.pm_.c:285
-msgid "Save partition table"
-msgstr "ÆÄƼ¼Ç Å×À̺í ÀúÀå"
-
-#: ../../diskdrake_interactive.pm_.c:286
-msgid "Restore partition table"
-msgstr "ÆÄƼ¼Ç Å×ÀÌºí º¹±¸"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "ÆÄƼ¼Ç Å×À̺í ÀÀ±Þóġ"
-
-#: ../../diskdrake_interactive.pm_.c:289
-msgid "Reload partition table"
-msgstr "ÆÄƼ¼Ç Å×ÀÌºí ´Ù½Ã Àбâ"
-
-#: ../../diskdrake_interactive.pm_.c:293
-msgid "Removable media automounting"
-msgstr "Å»Âø½Ä ¹Ìµð¾î ÀÚµ¿ ¸¶¿îÆ®"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "ÆÄÀÏÀ» ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"¹é¾÷ ÆÄƼ¼Ç Å×À̺í Å©±â°¡ °°Áö ¾Ê½À´Ï´Ù.\n"
-"°è¼Ó ÇϽðڽÀ´Ï±î?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "°æ°í"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Ç÷ÎÇÇ µð½ºÅ©¸¦ µå¶óÀ̺꿡 ³ÖÀ¸¼¼¿ä\n"
-"Ç÷ÎÇÇ µð½ºÅ©ÀÇ ¸ðµç ÀڷḦ ÀÒ°Ô µË´Ï´Ù."
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "ÆÄƼ¼Ç Å×ÀÌºí º¹±¸ ½Ãµµ Áß..."
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "ÀÚ¼¼ÇÑ Á¤º¸"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Å©±âÁ¶Á¤"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "À̵¿"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Æ÷¸Ë"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "È°¼ºÈ­"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "RAID¿¡ Ãß°¡"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "LVM¿¡ Ãß°¡"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "RAID·ÎºÎÅÍ Á¦°Å"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "LVMÀ¸·ÎºÎÅÍ Á¦°Å"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "RAID ¼öÁ¤"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "·çÇÁ¹éÀ¸·Î »ç¿ë"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "»õ ÆÄƼ¼Ç ¸¸µé±â"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "½ÃÀÛ ¼½ÅÍ: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Å©±â(MB) :"
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "ÆÄÀϽýºÅÛ À¯Çü: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "¸¶¿îÆ® À§Ä¡: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "»ç¿ëÀÚ Á¤ÀÇ"
-
-#: ../../diskdrake_interactive.pm_.c:462
-msgid "Remove the loopback file?"
-msgstr "·çÇÁ¹é ÆÄÀÏÀ» Á¦°ÅÇմϱî?"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "ÆÄƼ¼Ç À¯Çü º¯°æ"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "EXT2¿¡¼­ EXT3·Î º¯°æ"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "%sÆÄÀÏÀ» ¾îµð¿¡ ·çÇÁ¹éÀ¸·Î ¸¶¿îÆ® ÇϽðڽÀ´Ï±î?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"ÀÌ ÆÄƼ¼ÇÀº loopbackÀ¸·Î ¼³Á¤µÇ¾î ÀÖÀ¸¹Ç·Î ¸¶¿îÆ® Æ÷ÀÎÆ®¸¦ º¯°æÇÒ¼ö ¾ø½À´Ï"
-"´Ù.\n"
-"loopbackÀ» ¸ÕÀú Á¦°ÅÇϼ¼¿ä."
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "µµ½º ÆÄÀϽýºÅÛÀÇ ¹üÀ§ °è»êÁß"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Å©±âº¯°æ"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "ÀÌ ÆÄƼ¼ÇÀº Å©±âº¯°æÀÌ Çã¿ëµÇÁö ¾Ê½À´Ï´Ù."
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "ÀÌ ÆÄƼ¼ÇÀÇ ¸ðµç µ¥ÀÌŸ¸¦ ¹é¾÷ÇÏ¿©¾ß ÇÕ´Ï´Ù."
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "%s ÆÄƼ¼ÇÀÇ Å©±â¸¦ º¯°æÇϸé, ¸ðµç µ¥ÀÌŸ¸¦ ÀҰԵ˴ϴÙ."
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "»õ·Î¿î Å©±â¸¦ ¼±ÅÃÇØ ÁÖ¼¼¿ä"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "»õ·Î¿î ¿ë·®(MB):"
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "¾î¶² µð½ºÅ©¸¦ À̵¿ÇÏ°í ½ÍÀ¸½Ê´Ï±î?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "¼½ÅÍ"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "¾î¶² ¼½Å͸¦ À̵¿ÇÏ°í ½ÍÀ¸½Ê´Ï±î?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "À̵¿ Áß"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "ÆÄƼ¼Ç À̵¿ Áß..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Ãß°¡ÇÒ ±âÁ¸ RAID¸¦ ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "»õ·Î ¸¸µé±â"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Ãß°¡ÇÒ LVM¸¦ ¼±ÅÃÇϼ¼¿ä"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "LVM À̸§?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "ÀÌ ÆÄƼ¼ÇÀº loopbackÀ¸·Î »ç¿ëµÉ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "·çÇÁ¹é"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "·çÇÁ¹é ÆÄÀÏ À̸§: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-msgid "Give a file name"
-msgstr "ÆÄÀÏ À̸§À» ÀÔ·ÂÇϼ¼¿ä."
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "´Ù¸¥ ·çÇÁ¹éÀÌ ÀÌ ÆÄÀÏÀ» »ç¿ëÇÏ°í ÀÖ½À´Ï´Ù, ´Ù¸¥ °ÍÀ» ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "ÆÄÀÏÀÌ ÀÌ¹Ì Á¸ÀçÇÕ´Ï´Ù. ±×°ÍÀ» »ç¿ëÇմϱî?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "ÀåÄ¡"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "·¹º§"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "Å©±â"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "ÁÖÀÇ : ÀÌ Á¶ÀÛÀº À§ÇèÇÕ´Ï´Ù."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "¾î¶² À¯ÇüÀÇ ÆÄƼ¼ÇÀԴϱî?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Á˼ÛÇÕ´Ï´Ù. /boot µð·ºÅ丮°¡ µå¶óÀ̺ê»ó¿¡¼­ Çã¿ë¹üÀ§¸¦ ³Ñ¾î¼­ ÀÖ¾î »ý¼ºÇÒ¼ö "
-"¾ø½À´Ï´Ù. ( 1024 ½Ç¸°´õ ÀÌÇÏ¿¡¼­¸¸ °¡´ÉÇÕ´Ï´Ù.\n"
-"LILO¸¦ »ç¿ëÇÑ´Ù°í ÇÏ´õ¶óµµ µ¿ÀÛÇÏÁö ¾Ê°í, LILO ÀÚü¸¦ »ç¿ëÇÒ¼öµµ ¾ø½À´Ï´Ù."
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"¼±ÅÃÇÑ root(/)°¡ ¹°¸®ÀûÀ¸·Î 1024½Ç¸°´õ µÚ¿¡ ÀÖ½À´Ï´Ù.\n"
-"µû¶ó¼­ /boot ÆÄƼ¼ÇÀ» °¡Áú¼ö ¾ø½À´Ï´Ù.\n"
-"LILO ºÎÆ® ¸Å´ÏÀú¸¦ »ç¿ëÇÏ·Á ÇÑ´Ù¸é, ÁÖÀÇÇؼ­ /boot ÆÄƼ¼ÇÀ» Ãß°¡Çϼ¼¿ä."
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"¼ÒÇÁÆ®¿þ¾î RAID ÆÄƼ¼ÇÀ» ·çÆ®(/)·Î ÁöÁ¤Çß½À´Ï´Ù.\n"
-"¾î¶°ÇÑ ºÎÆ®·Î´õµµ /boot ÆÄƼ¼Ç ¾øÀÌ´Â ÀÌ°ÍÀ» ó¸®ÇÏÁö ¸øÇÕ´Ï´Ù.\n"
-"±×·¯¹Ç·Î /boot ÆÄƼ¼ÇÀ» Ãß°¡ÇÏ´Â °ÍÀ» ÀØÁö ¸¶¼¼¿ä."
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "%s µå¶óÀ̺êÀÇ ÆÄƼ¼Ç Å×À̺íÀ» ÀúÀåÇÕ´Ï´Ù."
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "º¯°æµÈ°ÍÀ» Àû¿ëÇϱâ À§Çؼ± ¸®ºÎÆÃÀÌ ÇÊ¿äÇÕ´Ï´Ù."
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "%s ÆÄƼ¼ÇÀ» Æ÷¸ËÇϸé, ¸ðµç µ¥ÀÌŸ¸¦ ÀÒ°Ô µË´Ï´Ù."
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Æ÷¸Ë Áß"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "loopback ÆÄÀÏ %s Æ÷¸ÅÁß"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "%s ÆÄƼ¼Ç Æ÷¸ËÁß"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Hide files"
-msgstr "ÆÄÀÏ ¼û±â±â"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Move files to the new partition"
-msgstr "»õ ÆÄƼ¼ÇÀ¸·Î ÆÄÀÏ ¿È±â±â"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"µð·ºÅ丮 %s¿¡´Â ÀÌ¹Ì µ¥ÀÌÅÍ°¡ ÀÖ½À´Ï´Ù.\n"
-"(%s)"
-
-#: ../../diskdrake_interactive.pm_.c:906
-msgid "Moving files to the new partition"
-msgstr "»õ ÆÄƼ¼ÇÀ¸·Î ÆÄÀÏ ¿È±â´Â Áß"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr "%s º¹»ç Áß"
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, c-format
-msgid "Removing %s"
-msgstr "%s Á¦°Å Áß"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "ÀåÄ¡: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS µå¶óÀÌºê ¹®ÀÚ: %s (´ÜÁö ÃßÃøÀÏ »ÓÀÓ)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "À¯Çü: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "À̸§:"
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "½ÃÀÛ: ¼½ÅÍ %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Å©±â: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ¼½ÅÍ"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "%d ½Ç¸°´õºÎÅÍ %d ½Ç¸°´õ±îÁö\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Æ÷¸ËµÇ¾úÀ½\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Æ÷¸Ë ¾ÈµÇ¾úÀ½\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "¸¶¿îÆ® µÇ¾úÀ½\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "·¹À̵å ÀåÄ¡ %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"·çÇÁ¹é ÆÄÀÏ(µé):\n"
-"   %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"±âº»ÀûÀ¸·Î ºÎÆõǴ ÆÄƼ¼Ç\n"
-"    (lilo¸¦ À§ÇÑ°ÍÀÌ ¾Æ´Ï¶ó MS-DOS boot¸¦ À§ÇÑ°ÍÀÓ)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "%s µî±Þ\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Å©±â %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "·¹À̵å-µð½ºÅ© %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "·çÇÁ¹é ÆÄÀÏ À̸§: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"ÀÌ ÆÄƼ¼ÇÀº µå¶óÀ̹ö ÆÄƼ¼ÇÀÔ´Ï´Ù.\n"
-"±×³É µÎ´Â °ÍÀÌ ÁÁ½À´Ï´Ù.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"ÀÌ Æ¯º°ÇÑ ºÎÆ®½ºÆ®·¦\n"
-"ÆÄƼ¼ÇÀº ½Ã½ºÅÛÀ» \n"
-"µà¾ó ºÎÆÃÇϱâ À§ÇÑ °ÍÀÔ´Ï´Ù.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Å©±â : %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "À§Ä¡: %s ½Ç¸°ÅÍ, %s Çìµå, %s ¼½ÅÍ\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Á¤º¸: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-µð½ºÅ© %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "ÆÄƼ¼Ç Å×À̺í À¯Çü: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "%d ¹ö½º»ó¿¡¼­ ID %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "¿É¼Çµé: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s Æ÷¸Ë ½ÇÆÐ(µå¶óÀ̺ê %s)"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "%s´Â %s À¯ÇüÀ̹ǷΠÆ÷¸ËÇÒ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "¸¶¿îÆ® ½ÇÆÐ"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "ÆÄÀϽýºÅÛ Á¡°ËÀÌ Á¾·áÄÚµå %d ¶Ç´Â ½Ã±×³Î %d·Î ½ÇÆÐÇÏ¿´½À´Ï´Ù."
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "¸¶¿îÆ® ½ÇÆÐ: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "%s¸¦ ¾ð¸¶¿îÆ®Áß ¿À·ù¹ß»ý: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "´Ü¼øÈ­"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "¼­¹ö"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "16MB ¹Ì¸¸ÀÇ ÆÄƼ¼Ç¿¡´Â JFS ÆÄÀÏ ½Ã½ºÅÛÀ» »ç¿ëÇÒ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "32MB ¹Ì¸¸ÀÇ ÆÄƼ¼Ç¿¡´Â ReiserFS ÆÄÀÏ ½Ã½ºÅÛÀ» »ç¿ëÇÒ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "¸¶¿îÆ® À§Ä¡´Â ¹Ýµå½Ã ¡¸/¡¹·Î ½ÃÀÛÇÏ¿©¾ß ÇÕ´Ï´Ù."
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "¸¶¿îÆ® À§Ä¡ %s°¡ ÀÌ¹Ì Á¸ÀçÇÕ´Ï´Ù.\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr " %s ¸¶¿îÆ® Æ÷ÀÎÆ®·Î LVM ³í¸®º¼·ýÀ» »ç¿ëÇÒ ¼ö´Â ¾ø½À´Ï´Ù. "
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "ÀÌ µð·ºÅ丮´Â ·çÆ® ÆÄÀϽýºÅÛ ¾È¿¡ ÀÖ¾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"ÀÌ ¸¶¿îÆ® À§Ä¡¿¡´Â Æ®·ç ÆÄÀϽýºÅÛ (ext2, reiserfs)ÀÌ ¸¶¿îÆ® µÇ¾î¾ß ÇÕ´Ï´Ù.\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "%s¸¦ ¾²±âÀ§ÇØ ¿©´ÂÁß ¿À·ù¹ß»ý: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"¿À·ù ¹ß»ý - »õ·Î¿î ÆÄÀÏ ½Ã½ºÅÛÀ» ¸¸µé ¾î¶² ¿Ã¹Ù¸¥ ÀåÄ¡µµ ãÀ» ¼ö ¾ø½À´Ï´Ù.ÀÌ "
-"¹®Á¦¸¦ ÇØ°áÇϽ÷Á¸é, Çϵå¿þ¾î¸¦ Á¡°ËÇØ º¸½Ã±â ¹Ù¶ø´Ï´Ù."
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "¾î¶² ÆÄƼ¼Çµµ Á¸ÀçÇÏÁö ¾Ê½À´Ï´Ù."
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"¼±ÅÃµÈ Çϵåµð½ºÅ©»óÀÇ ±âÁ¸ ¸®´ª½º ÆÄƼ¼ÇÀÌ À§¿¡ ¿­°ÅµÇ¾î ÀÖ½À´Ï´Ù.\n"
-"¸¶¹ý»ç¿¡ ÀÇÇØ ÀÌ¹Ì ¼³Á¤µÈ »çÇ×À» º¸Á¸ÇÒ ¼öµµ ÀÖÀ¸¸ç, ÀÌ´Â ´ëºÎºÐÀÇ ÀϹÝ\n"
-"¼³Ä¡¿¡ ÀûÀýÇÑ ¼³Á¤ÀÔ´Ï´Ù. ¸¸¾à Á÷Á¢ º¯°æÇϽðڴٸé, ÃÖ¼ÒÇÑ ·çÆ® ÆÄƼ¼Ç"
-"(¡¸/¡¹)\n"
-"Àº ¹Ýµå½Ã ÁöÁ¤ÇØ¾ß ÇÕ´Ï´Ù. ³Ê¹« ÀÛÀº ÆÄƼ¼ÇÀ» ¼±ÅÃÇÏÁö´Â ¸¶¼¼¿ä. ÃæºÐÇÑ ¼ÒÇÁ"
-"Æ®¿þ¾î\n"
-"¸¦ ¼³Ä¡ÇÏÁö ¸øÇÏ´Â ¼ö°¡ ÀÖ½À´Ï´Ù. ¸¸¾à °³ÀÎ µ¥ÀÌÅÍ°¡ º°µµÀÇ ÆÄƼ¼Ç¿¡ ÀúÀåµÇµµ"
-"·Ï\n"
-"ÇÏ°í ½Í´Ù¸é, ¡¸/home¡¹ÆÄƼ¼ÇÀ» º°µµ·Î ¸¸µå¼¼¿ä.(¿ÀÁ÷ ¸®´ª½º ÆÄƼ¼ÇÀÌ µÑ ÀÌ»ó"
-"ÀÏ\n"
-"°æ¿ì¿¡¸¸ °¡´ÉÇÕ´Ï´Ù.)\n"
-"\n"
-"°¢ ÆÄƼ¼ÇÀº ´ÙÀ½°ú °°ÀÌ ¿­°ÅµË´Ï´Ù: ¡¸À̸§¡¹,¡¸¿ë·®¡¹.\n"
-"\n"
-"¡¸À̸§¡¹¿µ¿ªÀÇ ±¸Á¶: ¡¸Çϵåµð½ºÅ© À¯Çü¡¹,¡¸Çϵåµð½ºÅ© ¹øÈ£¡¹,\n"
-"¡¸ÆÄƼ¼Ç ¹øÈ£¡¹(°¡·É, ¡¸hda1¡¹).\n"
-"\n"
-"¡¸Çϵåµð½ºÅ© À¯Çü¡¹Àº, IDE µð½ºÅ©ÀÏ °æ¿ì¿¡´Â ¡¸hd¡¹À̸ç,\n"
-"SCSI µð½ºÅ©ÀÏ °æ¿ì¿¡´Â ¡¸sd¡¹ÀÔ´Ï´Ù.\n"
-"\n"
-"¡¸Çϵåµð½ºÅ© ¹øÈ£¡¹´Â Ç×»ó ¡¸hd¡¹¶Ç´Â ¡¸sd¡¹µÚ¿¡ ¿À´Â ¹®ÀÚÀÔ´Ï´Ù.\n"
-"IDE Çϵåµð½ºÅ©ÀÇ °æ¿ì:\n"
-"\n"
-"  ¡Û ¡¸a¡¹´Â ¡¸ÁÖ IDE Á¦¾î±â»óÀÇ ÁÖ µð½ºÅ©¡¹¸¦ ÀǹÌÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸b¡¹´Â ¡¸ÁÖ IDE Á¦¾î±â»óÀÇ º¸Á¶ µð½ºÅ©¡¹¸¦ ÀǹÌÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸c¡¹´Â ¡¸º¸Á¶ IDE Á¦¾î±â»óÀÇ ÁÖ µð½ºÅ©¡¹¸¦ ÀǹÌÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸d¡¹´Â ¡¸º¸Á¶ IDE Á¦¾î±â»óÀÇ º¸Á¶ µð½ºÅ©¡¹¸¦ ÀǹÌÇÕ´Ï´Ù.\n"
-"\n"
-"SCSI Çϵåµð½ºÅ©ÀÇ °æ¿ì, ¡¸a¡¹´Â ¡¸ÃÖ¼Ò SCSI ID¡¹, ¡¸b¡¹´Â ¡¸´ÙÀ½ ÃÖ¼Ò SCSI "
-"ID¡¹\n"
-"¿Í °°Àº ½ÄÀ¸·Î Àǹ̸¦ °¡Áý´Ï´Ù."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"¸Çµå·¹ÀÌÅ© ¸®´ª½º ¼³Ä¡ ½Ã½ºÅÛÀº ¿©·¯ ÀåÀÇ CD·Î ±¸¼ºµÇ¾î ÀÖ½À´Ï´Ù.\n"
-"µå·¹ÀÌÅ©X´Â ¼±ÅÃµÈ °¢°¢ÀÇ ÆÑÅ°Áö°¡ ¾î´À CD¿¡ µé¾î ÀÖ´ÂÁö ÀÌ¹Ì ¾Ë°í ÀÖ½À´Ï"
-"´Ù.\n"
-"ÇÊ¿ä½Ã ÇöÀç CD¸¦ ÀÚµ¿À¸·Î ²¨³»°í ´Ù¸¥ CDÀÇ »ðÀÔÀ» ¿äûÇÒ °ÍÀÔ´Ï´Ù."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"ÀÌÁ¦ ½Ã½ºÅÛ»ó¿¡ ¼³Ä¡ÇÒ ÇÁ·Î±×·¥µéÀ» ÁöÁ¤ÇÒ Â÷·ÊÀÔ´Ï´Ù.\n"
-"¸Çµå·¹ÀÌÅ© ¸®´ª½º¿¡´Â ¼³Ä¡ÇÒ ¼ö ÀÖ´Â ¼öõ °³ÀÇ ÇÁ·Î±×·¥µéÀÌ Àֱ⠶§¹®¿¡\n"
-"»ç¿ëÀÚ°¡ ±×°ÍµéÀ» ¸ðµÎ ´Ù ¾ËÁö´Â ¸øÇÒ °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"¸¸¾à Ç¥ÁØ CD ¼³Ä¡¸¦ ¼öÇàÇÏ°í ÀÖ´Â ÁßÀ̶ó¸é, ÇöÀç °¡Áö°í ÀÖ´Â CDµé¿¡ ´ëÇØ\n"
-"Áú¹®ÇÒ °ÍÀÔ´Ï´Ù. °¡Áö°í ÀÖ´Â CDµéÀÇ ¶óº§À» È®ÀÎÇÏ°í ÇöÀç ´ÔÀÇ »óȲ¿¡ ¸Â´Â\n"
-"¼±Åà »óÀÚ¸¦ ÁöÁ¤Çϼ¼¿ä. °è¼ÓÇÒ Áغñ°¡ µÇ¾úÀ¸¸é, ¡¸È®ÀΡ¹À» ´©¸£¼¼¿ä.\n"
-"\n"
-"ÆÑÅ°ÁöµéÀº ¿ëµµ¿¡ µû¶ó ±×·ìÀ¸·Î ³ª¿­µÇ¾î ÀÖ½À´Ï´Ù.\n"
-"±×·ìµé ÀÚü´Â ¶Ç´Ù½Ã ³× °³ÀÇ ¿µ¿ªÀ¸·Î ³ª¿­µÇ¾î ÀÖ½À´Ï´Ù:\n"
-"\n"
-"  ¡Û ¡¸¿öÅ©½ºÅ×À̼ǡ¹: ½Ã½ºÅÛÀ» ¿öÅ©½ºÅ×À̼ÇÀ¸·Î »ç¿ëÇÒ °èȹÀ̶ó¸é,\n"
-"Çϳª ÀÌ»óÀÇ ÇØ´ç ±×·ìÀ» ¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-"  ¡Û ¡¸°³¹ß¡¹: ½Ã½ºÅÛÀ» ÇÁ·Î±×·¡¹ÖÀÇ ¿ëµµ·Î »ç¿ëÇÏ·Á ÇÑ´Ù¸é, ¿øÇÏ´Â ±×·ìµéÀ»\n"
-"¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-"  ¡Û ¡¸¼­¹ö¡¹: ³¡À¸·Î, ½Ã½ºÅÛÀÌ ¼­¹öµÇ±â¸¦ ¿øÇÑ´Ù¸é, ¿©±â¼­ ´ëºÎºÐÀÇ ÀÏ¹Ý ¼­ºñ"
-"½ºµéÀÌ\n"
-"¼³Ä¡µÇµµ·Ï ¼±ÅÃÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸±×·¡ÇÈ È¯°æ¡¹: ¿©±â´Â ´ÔÀÌ ¼±È£ÇÏ´Â ±×·¡ÇÈ È¯°æÀ» ¼±ÅÃÇÏ´Â °÷ÀÔ´Ï´Ù.\n"
-"±×·¡ÇÈ È¯°æ ¿öÅ©½ºÅ×À̼ÇÀ» ¿øÇÑ´Ù¸é, ÃÖ¼ÒÇÑ Çϳª´Â ¼±ÅÃÇØ¾ß ÇÕ´Ï´Ù!\n"
-"\n"
-"¸¶¿ì½º Æ÷ÀÎÅ͸¦ ±×·ì À̸§µé À§·Î ¿Ã¸®¸é, ÇØ´ç ±×·ì¿¡ ´ëÇÑ ÀÛÀº dz¼± µµ¿ò¸»"
-"À»\n"
-"º¸¿© ÁÙ °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"¡¸°³º° ÆÑÅ°Áö ¼±ÅṿɼÇÀ» ¼±ÅÃÇÒ ¼öµµ ÀÖ½À´Ï´Ù.\n"
-"ÀÌ ¿É¼ÇÀº ´ÔÀÌ Á¦°øµÇ¾îÁö´Â ÆÑÅ°Áöµé¿¡ ´ëÇØ Àß ¾Ë°í Àְųª, ¼³Ä¡µÇ´Â ÆÑÅ°Áöµé"
-"¿¡ ´ëÇÑ\n"
-"ÃÑüÀûÀÎ Á¦¾î¸¦ ¿øÇÒ °æ¿ì¿¡ À¯¿ëÇÒ °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"¸¸¾à ´ÔÀÌ ¡¸¾÷µ¥ÀÌÆ®¡¹¸ðµå·Î ¼³Ä¡¸¦ ½ÃÀÛÇß´Ù¸é, ±âÁ¸¿¡ ¼³Ä¡µÇÁö ¾ÊÀº ÆÑÅ°Áöµé"
-"ÀÌ\n"
-"¼³Ä¡µÇ´Â °ÍÀ» ¸·±âÀ§ÇØ ¸ðµç ±×·ìÀ» ¼±ÅÃÇØÁ¦ÇÒ ¼ö ÀÖ½À´Ï´Ù. ÀÌ·¸°Ô ÇÏ´Â °ÍÀº\n"
-"±âÁ¸ ½Ã½ºÅÛÀ» ¾÷µ¥ÀÌÆ®Çϰųª °íÄ¡±â À§ÇÑ ÁÁÀº ¹æ¹ýÀÔ´Ï´Ù."
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"ÀÌ ÄÄÇ»Å͸¦ ÀÎÅͳÝÀ̳ª Áö¿ª ³×Æ®¿ö¿¡ ¿¬°áÇÏ°í ½Í´Ù¸é, ¿Ã¹Ù¸¥ ¿É¼ÇÀ»\n"
-"¼±ÅÃÇϼ¼¿ä. ¿É¼ÇÀ» ¼±ÅÃÇϱâ Àü¿¡ ³×Æ®¿÷ ÀåÄ¡ÀÇ Àü¿øÀÌ µé¾î¿ÍÀÖ´ÂÁö\n"
-"È®ÀÎÇؼ­ µå·¹ÀÌÅ©X°¡ ÀÚµ¿°¨ÁöÇÒ ¼ö ÀÖµµ·Ï Çϼ¼¿ä.\n"
-"\n"
-"¸Çµå·¹ÀÌÅ© ¸®´ª½º¿¡¼­´Â ¼³Ä¡½Ã¿¡ ÀÎÅÍ³Ý ¼³Á¤À» ÇÏ´Â °ÍÀÌ ¿©·¯ ¸ð·Î ÁÁ½À´Ï"
-"´Ù.\n"
-"À¯È¿ÇÑ ¿¬°á À¯Çü: ÀüÅëÀû ¸ðµ©, ISDN ¸ðµ©, ADSL ¿¬°á, ÄÉÀÌºí ¸ðµ©, LAN ¿¬°á(ÀÌ"
-"´õ³Ý)\n"
-"\n"
-"ÀÚ¼¼ÇÑ ¼³Á¤ »çÇ×Àº ¿©±â¼­ ¼³¸íµÇÁö ¾ÊÀ» °ÍÀÔ´Ï´Ù. ¸ðµç ÀÎÀڵ鿡 ´ëÇÑ Á¤º¸´Â\n"
-"ÀÎÅÍ³Ý ¼­ºñ½º °ø±ÞÀÚ³ª ³×Æ®¿÷ °ü¸®ÀÚ¿¡°Ô ¹®ÀÇÇؼ­ ¾Ë¾Æ º¸¼¼¿ä.\n"
-"\n"
-"»ç¿ëÀÚ ¼³¸í¼­¸¦ º¸¸é, ÀÎÅÍ³Ý ¿¬°á¿¡ ´ëÇÑ ÀÚ¼¼ÇÑ Á¤º¸¸¦ ¾òÀ» ¼ö ÀÖ½À´Ï´Ù.\n"
-"¶Ç´Â ½Ã½ºÅÛÀÌ ´Ù ¼³Ä¡µÉ ¶§±îÁö ±â´Ù¸° ÈÄ¿¡, ¼³¸í¼­¿¡ ³ª¿Í ÀÖ´Â ÇÁ·Î±×·¥À» »ç"
-"¿ëÇÏ¿©\n"
-"¿¬°áÀ» ¼³Á¤ÇÒ ¼öµµ ÀÖ½À´Ï´Ù.\n"
-"\n"
-"³×Æ®¿÷ ¼³Á¤À» ¼³Ä¡°¡ ³¡³­ÈÄ¿¡ ÇÏ°í ½Í°Å³ª, ³×Æ®¿÷ ¼³Á¤À» ³¡¸¶Ä£ »óŶó¸é,\n"
-"¡¸Ãë¼Ò¡¹¸¦ ´­·¯¼­ °è¼Ó ÁøÇàÇϼ¼¿ä."
-
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"ÀÌÁ¦ ºÎÆýÿ¡ ¾î¶² ¼­ºñ½º¸¦ ÀÚµ¿À¸·Î ½ÃÀÛÇÏ°Ô ÇÒÁö¸¦ ¼±ÅÃÇØ¾ß ÇÕ´Ï´Ù.\n"
-"\n"
-"ÇöÀç ¼³Ä¡µÈ ¸ðµç ¼­ºñ½ºµéÀÌ ¿©±â¿¡¼­ º¸¿©Áö°í ÀÖ½À´Ï´Ù.\n"
-"½ÅÁßÇÏ°Ô °ËÅäÇؼ­ ºÎÆýÿ¡ Ç×»ó ÇÊ¿ä·ÎÇÏ´Â °ÍÀÌ ¾Æ´Ï¶ó¸é ¼±ÅÃÀ» ÇØÁ¦Çϼ¼¿ä.\n"
-"\n"
-"¸¶¿ì½º¸¦ ¼­ºñ½º À̸§µé À§·Î ¿Ã¸®¸é, °¢ ¼­ºñ½º¿¡ ´ëÇÑ °£´ÜÇÑ ¼³¸íÀ» º¸¿© ÁÙ °Í"
-"ÀÔ´Ï´Ù.\n"
-"¸¸¾à ¾î¶² ¼­ºñ½º°¡ ÇÊ¿äÇÑ °ÍÀÎÁö ¾Æ´ÑÁö¸¦ Àß ¸ð¸£°Ú´Ù¸é,\n"
-"±âº»°ªÀ¸·Î ±×³É µÎ´Â °ÍÀÌ ¾ÈÀüÇÑ ¼±ÅÃÀÔ´Ï´Ù.\n"
-"\n"
-"ÀÌ ÄÄÇ»Å͸¦ ¼­¹ö¿ëÀ¸·Î »ç¿ëÇÏ·Á ÇÑ´Ù¸é, ÀÌ ´Ü°è¿¡¼­ ¸Å¿ì ÁÖÀÇÇØ¾ß ÇÕ´Ï´Ù.\n"
-"ÇÊ¿äÇÏÁö ¾ÊÀº ¼­ºñ½º°¡ ½ÃÀ۵Ǵ °ÍÀº ¹Ù¶÷Á÷ÇÏÁö ¾Ê½À´Ï´Ù. ÀϺΠ¼­ºñ½º´Â \n"
-"¼­¹ö»ó¿¡¼­ ½ÇÇڵȴٸé À§ÇèÇÒ ¼öµµ ÀÖ´Ù´Â °ÍÀ» ¸í½ÉÇϼ¼¿ä. ¿øÄ¢ÀûÀ¸·Î \n"
-"²À ÇÊ¿äÇÑ ¼­ºñ½ºµé¸¸ ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/¸®´ª½º´Â ½Ã°£À» GMT(±×¸®´ÏÄ¡ °ü¸® ½Ã°£)·Î °ü¸®Çϸ鼭, ¼±ÅÃµÈ ½Ã°£´ë¿¡\n"
-"µû¶ó ¹ø¿ªÇÏ¿© Ç¥ÇöÇÕ´Ï´Ù."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-"X(X À©µµ¿ì ½Ã½ºÅÛ)Àº GNU/¸®´ª½º ±×·¡ÇÈ ÀÎÅÍÆäÀ̽ºÀÇ ÇÙ½ÉÀÔ´Ï´Ù.\n"
-"À̸¦ ±â¹ÝÀ¸·Î ¸Çµå·¹ÀÌÅ© ¸®´ª½º¿¡ Æ÷ÇÔµÈ ¸ðµç ±×·¡ÇÈȯ°æ(KDE, ±×³ð,\n"
-"¿¡ÇÁÅͽºÅÜ, À©µµ¿ì¸ÞÀÌÄ¿...)ÀÌ ÀÛµ¿ÇÕ´Ï´Ù. À̹ø ´Ü°è¿¡¼­ µå·¹ÀÌÅ©X´Â\n"
-"XÀÇ Áöµ¿ ¼³Á¤À» ½ÃµµÇÒ °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"¾ÆÁÖ ¿À·¡µÈ(¶Ç´Â ¾ÆÁÖ ÃÖ½ÅÀÇ) Çϵå¿þ¾î°¡ ¾Æ´Ï¶ó¸é, ¼³Á¤¿¡ ½ÇÆÐÇÒ ÀÏÀº\n"
-"°ÅÀÇ ¾øÀ» °ÍÀÔ´Ï´Ù. ¼³Á¤¿¡ ¼º°øÇϸé, ÇØ´ç ¸ð´ÏÅÍÀÇ Å©±â¿¡¼­ °¡´ÉÇÑ\n"
-"ÃÖ°í Çػ󵵷ΠÀÚµ¿ Å×½ºÆ®¸¦ ½ÃÀÛÇÒ °ÍÀÔ´Ï´Ù.\n"
-"Å×½ºÆ®¿¡¼­ âÀ» Çϳª ¶ç¿ì°í ´Ô¿¡°Ô º¸ÀÌ´ÂÁö Áú¹®ÇÒ °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"¸¸¾à ¡¸Àü¹®°¡¡¹¸ðµå·Î ¼³Ä¡ ÁßÀ̶ó¸é, ´ÔÀº X¼³Á¤ ¸¶¹ý»ç·Î\n"
-"¾È³»µÉ °ÍÀÔ´Ï´Ù. ÀÌ ¸¶¹ý»ç¿¡ ´ëÇÑ ´õ ÀÚ¼¼ÇÑ Á¤º¸¸¦ º¸·Á¸é,\n"
-"»ç¿ëÀÚ ¼³¸í¼­ÀÇ ÇØ´ç ºÎºÐÀ» ÂüÁ¶Çϼ¼¿ä.\n"
-"\n"
-"¸¸¾à Å×½ºÆ® âÀÇ ±Û¾¾¸¦ º¼ ¼ö ÀÖ°í ¡¸¿¹¡¹¸¦ ´©¸£¸é, µå·¹ÀÌÅ©X´Â ´ÙÀ½ ´Ü°è·Î\n"
-"ÁøÇàÇÒ °ÍÀÔ´Ï´Ù. ¸¸¾à ±Û¾¾¸¦ ¾Ë¾Æº¼ ¼ö ¾ø´Ù¸é, ¼³Á¤ÀÌ Àß ¸øµÇ¾ú´Ù´Â °ÍÀ»\n"
-"ÀǹÌÇÕ´Ï´Ù. Å×½ºÆ®´Â 10ÃÊÈÄ¿¡ È­¸éÀ» º¹±¸Çϸ鼭 ÀÚµ¿À¸·Î\n"
-"Á¾·áÇÕ´Ï´Ù."
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"óÀ½ X ¼³Á¤À» ½ÃµµÇÒ ¶§, È­¸éÀÌ ÀÌ»óÇÏ°Ô º¸ÀÏ ¼ö ÀÖ½À´Ï´Ù.\n"
-"(È­¸éÀÌ ³Ê¹« À۰ųª, ¿À¸¥ÂÊ È¤Àº ¿ÞÂÊÀ¸·Î Ä¡¿ìÃÄ ÀÖÀ» ¼ö ÀÖ½À´Ï´Ù.)\n"
-"±×·¸±â ¶§¹®¿¡, ºñ·Ï X°¡ Á¤»ó ½ÇÇàµÇ´õ¶óµµ µå·¹ÀÌÅ©X´Â ´Ô²² ÀûÀýÇÑ\n"
-"¼³Á¤ÀÎÁö¸¦ Áú¹®ÇÒ °ÍÀÔ´Ï´Ù. ¶ÇÇÑ ´ÔÀÌ ¼±ÅÃÇÒ ¼ö ÀÖ´Â À¯È¿ÇÑ È­¸é¸ðµåµéÀÇ\n"
-"¸ñ·ÏÀ» Ç¥½ÃÇؼ­ Á÷Á¢ º¯°æÇÒ ¼ö ÀÖ°Ô ÇÒ °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"¾Æ¹«¸® Çصµ X°¡ Á¤»óÀûÀ¸·Î ÀÛµ¿µÇ°Ô ÇÒ ¼ö ¾ø´Ù¸é, ¡¸±×·¡ÇÈ Ä«µå º¯°æ¡¹À» ¼±ÅÃ"
-"ÇÏ°í\n"
-"¡¸¸ñ·Ï¿¡ ¾ø´Â Ä«µå¡¹¸¦ ¼±ÅÃÇϼ¼¿ä. ±×¸®°í ¼­¹ö Á¾·ù¸¦ Áú¹®ÇÒ ¶§, ¡¸FBDev¡¹"
-"¸¦\n"
-"¼±ÅÃÇϼ¼¿ä. ÀÌ°ÍÀº ¾ÈÀü¸ðµå ¿É¼ÇÀ̸ç ÇöÀçÀÇ ¸ðµç ±×·¡ÇÈ Ä«µå¿Í ȣȯµË´Ï´Ù.\n"
-"±×¸®°í ³ª¼­, ¡¸´Ù½Ã Å×½ºÆ®¡¹¸¦ ¼±ÅÃÇÏ¿© È®ÀÎÇϼ¼¿ä."
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"¸¶Áö¸·À¸·Î, ºÎÆýÿ¡ ÀÚµ¿À¸·Î ±×·¡ÇÈ È¯°æÀ» »ç¿ëÇÒ °ÍÀÎÁö¸¦ Áú¹®ÇÒ °ÍÀÔ´Ï"
-"´Ù.\n"
-"ÁÖÀÇ: ÀÌ Áú¹®Àº ¼³Á¤À» Å×½ºÆ®ÇÏÁö ¾Ê¾ÒÀ»Áö¶óµµ ³ªÅ¸³ª°Ô µÉ °ÍÀÔ´Ï´Ù.\n"
-"½Ã½ºÅÛÀ» È®½ÇÈ÷ ¼­¹ö¿ëÀ¸·Î »ç¿ëÇÒ °ÍÀ̰ųª, È­¸é ¼³Á¤¿¡ ¼º°øÇÏÁö ¸øÇÑ °æ¿ì¶ó"
-"¸é\n"
-"¡¸¾Æ´Ï¿À¡¹¸¦ ´©¸£¼¼¿ä."
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"ÀÌÁ¦ Çϵåµð½ºÅ©ÀÇ ¾îµð¿¡ ¸®´ª½º ¸Çµå·¹ÀÌÅ©¸¦ ¼³Ä¡ÇÒÁö¸¦\n"
-"¼±ÅÃÇØ¾ß ÇÕ´Ï´Ù. ¸¸¾à Çϵåµð½ºÅ©°¡ ¿ÏÀüÈ÷ ºñ¾î Àְųª ¶Ç´Â\n"
-"´Ù¸¥ ¿î¿µÃ¼Á¦°¡ Çϵåµð½ºÅ© Àüü¸¦ Á¡À¯ÇÏ°í ÀÖ´Ù¸é, ÆÄƼ¼ÇÀ»\n"
-" ³ª´©¾î¾ß ÇÕ´Ï´Ù. ÆÄƼ¼ÇÀ» ³ª´«´ÙÇÔÀº ¸®´ª½º ¸Çµå·¹ÀÌÅ©°¡\n"
-"¼³Ä¡µÉ °ø°£À» È®º¸Çϱâ À§ÇÏ¿© µð½ºÅ©¸¦ ³í¸®ÀûÀ¸·Î ºÐÇÒÇÑ´Ù´Â ÀǹÌÀÔ´Ï´Ù.\n"
-"\n"
-"ÀϹÝÀûÀ¸·Î ÆÄƼ¼Ç °úÁ¤À» °ÅÃÄ ¹ö¸®¸é ±âÁ¸ µ¥ÀÌÅÍÀÇ º¹±¸°¡ ºÒ°¡´ÉÇØÁö±â\n"
-"¶§¹®¿¡,Ãʺ¸ÀÚ¿¡°Ô´Â °í¹Î½º·´°í °ÆÁ¤½º·¯¿î ÀÛ¾÷ÀÔ´Ï´Ù. ÇÏÁö¸¸ ¸¶¹ý»ç¸¦\n"
-"»ç¿ëÇϸé ÀÌ ÀÛ¾÷À» ½±°Ô ÇÒ ¼ö ÀÖ½À´Ï´Ù. ½ÃÀÛÇϱâ Àü¿¡, ÃæºÐÇÑ ½Ã°£À» °¡Áö°í\n"
-"»ç¿ëÀÚ ¼³¸í¼­¸¦ ÀÐ¾î º¸¼¼¿ä.\n"
-"\n"
-"ÇöÀç Àü¹®°¡ ¸ðµå·Î ¼³Ä¡¸¦ ÁøÇà ÁßÀ̶ó¸é, ¸®´ª½º ¸Çµå·¹ÀÌÅ©ÀÇ ÆÄƼ¼Ç ºÐÇÒ µµ±¸"
-"ÀÎ\n"
-"µð½ºÅ©µå·¹ÀÌÅ©¸¦ ¸¸³ª°Ô µÉ °ÍÀÔ´Ï´Ù. ÀÌ µµ±¸´Â ÆÄƼ¼Çµå¸£ÀÌ ¼¼¹ÐÇÑ Á¶Á¤À» °¡"
-"´ÉÇÏ°Ô\n"
-"ÇÕ´Ï´Ù. ¼³¸í¼­ÀÇ µð½ºÅ©µå·¹ÀÌÅ© ÀåÀ» º¸¼¼¿ä; »ç¿ë¹ýÀÌ µ¿ÀÏÇÕ´Ï´Ù. À§¿¡¼­ ¾ð±Þ"
-"ÇßµíÀÌ\n"
-"È­¸é¿¡ ÀÖ´Â ¡¸¸¶¹ý»ç¡¹¹öÆ°À» ´­·¯¼­, ÆÄƼ¼Ç ºÐÇÒ ÀÛ¾÷À» À§ÇÑ ¸¶¹ý»ç¸¦\n"
-"½ÇÇàÇÒ ¼öµµ ÀÖ½À´Ï´Ù.\n"
-"\n"
-"¸¸¾à ÀÌÀü¿¡ ¸®´ª½º¸¦ ¼³Ä¡ÇÑ ÀûÀÌ Àְųª ´Ù¸¥ ÆÄƼ¼Ç µµ±¸·Î ¸¸µé¾î ³õÀº ¸®´ª½º"
-"¿ë\n"
-"ÆÄƼ¼ÇµéÀÌ ÀÌ¹Ì Á¸ÀçÇÑ´Ù¸é, ¸®´ª½º ¼³Ä¡¿¡ »ç¿ëÇÒ ÆÄƼ¼ÇµéÀ»\n"
-"¼±Åø¸ ÇÏ¸é µË´Ï´Ù.\n"
-"\n"
-"¸¸¾à ¾ÆÁ÷ ¸®´ª½º¿ë ÆÄƼ¼ÇÀÌ ¾ø´Ù¸é, »õ·Î ¸¸µé¾î¾ß ÇÕ´Ï´Ù. ±×·¯±â À§Çؼ­´Â\n"
-"À§¿¡ ÀÖ´Â ¸¶¹ý»ç¸¦ »ç¿ëÇϼ¼¿ä. Çϵåµð½ºÅ©ÀÇ ¼³Á¤¿¡ µû¶ó ´ÙÀ½°ú °°Àº\n"
-"¸î °¡ÁöÀÇ ¹æ¹ýÀÌ ÀÖ½À´Ï´Ù:\n"
-"\n"
-" ¡Û ºó °ø°£ »ç¿ë: ºó µð½ºÅ©ÀÇ ÀÚµ¿ ÆÄƼ¼Ç ºÐÇÒ ÀÛ¾÷À» ÇÏ°Ô µË´Ï´Ù.\n"
-"ÆÄƼ¼Ç ºÐÇÒ ÀÛ¾÷¿¡ ´ëÇØ ´õ ÀÌ»ó ½Å°æ¾µ ÇÊ¿ä°¡ ¾ø°Ô µË´Ï´Ù.\n"
-"\n"
-" ¡Û ±âÁ¸ ÆÄƼ¼Ç »ç¿ë: ¸¶¹ý»ç°¡ ±âÁ¸ÀÇ ¸®´ª½º ÆÄƼ¼ÇÀ» ¹ß°ßÇÑ °æ¿ìÀÔ´Ï´Ù.\n"
-"±âÁ¸ÀÇ ÆÄƼ¼Ç¿¡´Ù°¡ ¸®´ª½º¸¦ ¼³Ä¡ÇÒ·Á¸é, ÀÌ°ÍÀ» ¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-" ¡Û À©µµ¿ìÁî ÆÄƼ¼ÇÀÇ ºó °ø°£ »ç¿ë: ¸¸¾à MS À©µµ¿ìÁî°¡ ¼³Ä¡µÇ¾î ÀÖ°í ¸ðµç µð½º"
-"Å© °ø°£À» »ç¿ëÇÏ°í ÀÖ´Ù¸é,\n"
-"¸®´ª½º¿ë °ø°£À» »õ·Î ¸¸µé¾î¾ß ÇÕ´Ï´Ù. ÀÌ·¸°Ô ÇϱâÀ§Çؼ­´Â, À©µµ¿ìÁî ÆÄƼ¼ÇÀ» "
-"Áö¿ì°Å³ª(¡¸Àüü µð½ºÅ© »èÁ¦¡¹\n"
-"¿Í ¡¸Àü¹®°¡ ¸ðµå¡¹ºÎºÐÀ» ÂüÁ¶Çϼ¼¿ä.), À©µµ¿ìÁî ÆÄƼ¼ÇÀÇ Å©±â¸¦ ÀçÁ¶Á¤ÇÏ¿© °ø"
-"°£À» È®º¸ÇÒ ¼ö ÀÖ½À´Ï´Ù. À©µµ¿ìÁî\n"
-"ÆÄƼ¼ÇÀÇ ÀçÁ¶Á¤Àº ±âÁ¸ÀÇ µ¥ÀÌÅ͸¦ Æı«ÇÏÁö ¾Ê±â ¶§¹®¿¡, À©µµ¿ìÁî¿Í ¸®´ª½º ¸Ç"
-"µå·¹ÀÌÅ©¸¦ ÇÑ ÄÄÇ»ÅÍ¿¡¼­ ÇÔ²²\n"
-"»ç¿ëÇÏ°íÀÚ ÇÑ´Ù¸é  ÀÌ°ÍÀÌ ±ÇÀåµÇ´Â ¹æ¹ýÀÔ´Ï´Ù.\n"
-"\n"
-"ÀÌ ¹æ¹ýÀ» ¼±ÅÃÇÑ´Ù¸é, À©µµ¿ìÁî ÆÄƼ¼ÇÀÇ Å©±â°¡ ÇöÀ纸´Ù ÁÙ¾îµé±â ¶§¹®¿¡ À©µµ"
-"¿ìÁ\n"
-"»ç¿ëÇÒ ¶§¿¡´Â ¼ÒÇÁÆ®¿þ¾î¸¦ ¼³Ä¡Çϰųª µ¥ÀÌÅ͸¦ ÀúÀåÇÒ ºó °ø°£ÀÌ ±×¸¸Å­ Àû¾îÁø"
-"´Ù´Â\n"
-"°ÍÀ» À¯³äÇϼ¼¿ä.\n"
-"\n"
-" ¡Û Àüü µð½ºÅ© »èÁ¦: ¸¸¾à µð½ºÅ©»óÀÇ ¸ðµç ±âÁ¸ ÆÄƼ¼Ç°ú µ¥ÀÌÅ͸¦ »èÁ¦ÇÏ°í\n"
-"¸®´ª½º ¸Çµå·¹ÀÌÅ©¸¦ À§ÇÑ ÆÄƼ¼ÇÀ¸·Î ¹Ù²Ù°í ½Í´Ù¸é, ÀÌ°ÍÀ» ¼±ÅÃÇϼ¼¿ä.\n"
-"ÁÖÀÇÇϼ¼¿ä: ÀÏ´Ü ÀÌ·¸°Ô ÇÏ°í³ª¸é ´Ù½Ã µÇµ¹¸± ¼ö ¾ø½À´Ï´Ù.\n"
-"\n"
-"   !! ÀÌ ¿É¼ÇÀ» ¼±ÅÃÇÏ°Ô µÇ¸é, µð½ºÅ©»óÀÇ ¸ðµç µ¥ÀÌÅÍ°¡ ¼Õ½ÇµË´Ï´Ù. !!\n"
-"\n"
-" ¡Û À©µµ¿ìÁî Á¦°Å: µð½ºÅ©»óÀÇ ¸ðµç ÆÄƼ¼ÇÀ» »èÁ¦ÇÏ°í, ÃʱâÈ­µÈ µð½ºÅ© »óÅ¿¡"
-"¼­\n"
-"ÆÄƼ¼Ç ÀÛ¾÷À» ´Ù½Ã ÇÕ´Ï´Ù. µð½ºÅ©»óÀÇ ¸ðµç µ¥ÀÌÅÍ´Â ¼Õ½ÇµË´Ï´Ù.\n"
-"\n"
-"   !! ÀÌ ¿É¼ÇÀ» ¼±ÅÃÇÏ°Ô µÇ¸é, µð½ºÅ©»óÀÇ ¸ðµç µ¥ÀÌÅÍ°¡ ¼Õ½ÇµË´Ï´Ù. !!\n"
-"\n"
-" ¡Û Àü¹®°¡ ¸ðµå: ¸¸¾à ¼öµ¿À¸·Î ÆÄƼ¼Ç ÀÛ¾÷À» ÇÏ°íÀÚ ÇÑ´Ù¸é, ÀÌ°ÍÀ» ¼±ÅÃÇϼ¼"
-"¿ä.\n"
-"ÀÌ ¹æ¹ýÀº ´ë´ÜÈ÷ °­·ÂÇÏÁö¸¸ ¶ÇÇÑ À§ÇèÇÒ ¼ö ÀÖ´Ù´Â °ÍÀ» ¸í½ÉÇϼ¼¿ä. ½±°Ô µ¥ÀÌ"
-"Å͸¦\n"
-"ÀÒ¾î ¹ö¸± ¼ö ÀÖ½À´Ï´Ù. Àü¹®ÀûÀÎ Áö½ÄÀÌ ¾ø´Ù¸é, ÀÌ ¹æ¹ýÀº Àý´ë ¼±ÅÃÇÏÁö ¸¶¼¼"
-"¿ä."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"¼³Ä¡¸¦ ¿Ï·áÇÏ¿´½À´Ï´Ù. ´ÔÀÇ GNU/¸®´ª½º ½Ã½ºÅÛÀº ÀÌÁ¦ »ç¿ëÇÒ Áغñ°¡\n"
-"µÇ¾ú½À´Ï´Ù. ½Ã½ºÅÛÀ» ´Ù½Ã ºÎÆÃÇÏ·Á¸é ¡¸È®ÀΡ¹À» ´©¸£¼¼¿ä.\n"
-"ÄÄÇ»ÅÍ°¡ ´Ù½Ã ºÎÆõǸé, (´ÙÁß ºÎÆÃÀÌ ¼³Á¤µÇ¾úÀ» °æ¿ì¿¡) ´ÔÀÌ ¼±È£ÇÏ´Â\n"
-"¿î¿µÃ¼Á¦¸¦ ½ÃÀÛÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-"\n"
-"¡¸°í±Þ¡¹¹öÆ°(Á¡¹®°¡ ¸ðµå¿¡¸¸ ÀÖÀ½)À» ´©¸£¸é µÎ °³ÀÇ Ãß°¡ ¹öÆ°ÀÌ ³ªÅ¸³Ò´Ï´Ù:\n"
-"\n"
-"  ¡Û ¡¸ÀÚµ¿ ¼³Ä¡ Ç÷ÎÇÇ »ý¼º¡¹: ´ÔÀÌ Áö±Ý±îÁö ¼³Ä¡ÇÑ ³»¿ëÀ» °ü¸®ÀÚÀÇ º°´Ù¸¥\n"
-"µµ¿ò¾øÀÌ ÀÚµ¿À¸·Î Àüü ¼³Ä¡¸¦ ¼öÇàÇÏ°Ô ÇÏ´Â\n"
-"ÀÚµ¿ ¼³Ä¡ Ç÷ÎÇÇ µð½ºÅ©¸¦ ¸¸µì´Ï´Ù.\n"
-"\n"
-"    ÁÖÀÇ: ¹öÆ°À» ´©¸£¸é µÎ °³ÀÇ °³º°ÀûÀÎ ¿É¼ÇÀÌ ³ªÅ¸³³´Ï´Ù:\n"
-"\n"
-"    ¡Û ¡¸Àç»ý¡¹: ÆÄƼ¼Ç ³ª´©±â ÀÛ¾÷¸¸ Á¦¿ÜÇÏ°í, ³ª¸ÓÁö °úÁ¤Àº ÀÚµ¿¼³Ä¡·Î\n"
-"¼öÇàÇÏ´Â ÀÚµ¿¼³Ä¡ Ç÷ÎÇǸ¦ ¸¸µì´Ï´Ù.\n"
-"\n"
-"    ¡Û ¡¸ÀÚµ¿È­¡¹: µð½ºÅ©»óÀÇ ¸ðµç µ¥ÀÌÅ͸¦ »èÁ¦ÇÏ°í ¸ðµç ÆÄƼ¼ÇÀÌ ´Ù½Ã\n"
-"¸¸µé¾îÁö´Â ¿Ïº®ÇÑ ÀÚµ¿ ¼³Ä¡¸¦ ¼öÇàÇÏ´Â Ç÷ÎÇǸ¦ ¸¸µì´Ï´Ù.\n"
-"\n"
-"    ÀÌ ±â´ÉÀ» »ç¿ëÇϸé, ¸¹Àº ¼öÀÇ ºñ½ÁÇÑ ÄÄÇ»ÅÍ¿¡ ¼³Ä¡ÀÛ¾÷À» ÇÒ ¶§ Æí¸®ÇÕ´Ï"
-"´Ù.\n"
-"    ÀÚ¼¼ÇÑ Á¤º¸´Â ÀúÈñ À¬»çÀÌÆ®ÀÇ ÀÚµ¿¼³Ä¡°ü·Ã ºÎºÐÀ» ÂüÁ¶Çϼ¼¿ä.\n"
-"\n"
-"  ¡Û ¡¸ÆÑÅ°Áö ¼±ÅûçÇ× ÀúÀ塹(*): ¾Õ ´Ü°è¿¡¼­ ¼±ÅÃÇÑ ÆÑÅ°Áö ¸ñ·ÏÀ» ÀúÀåÇÕ´Ï"
-"´Ù.\n"
-"¶Ç ´Ù¸¥ ¼³Ä¡¸¦ ¼öÇàÇÒ ¶§, Ç÷ÎÇǸ¦ µå¶óÀ̺꿡 ³Ö°í, [F1]Å°¸¦ ´­·¯¼­\n"
-"¼³Ä¡ È­¸éÀÌ µµ¿ò¸» È­¸éÀ¸·Î µé¾î°¡°Ô ÇÑÈÄ, ¡¸linux defcfg=\"floppy\"¡¹¶ó°í\n"
-"ÀÔ·ÂÇϼ¼¿ä.\n"
-"\n"
-"(*) ´ÔÀº FATÀ¸·Î Æ÷¸ËµÈ Ç÷ÎÇÇ Çϳª¸¦ °¡Áö°í ÀÖ¾î¾ß ÇÕ´Ï´Ù.\n"
-"      (¸®´ª½º¿¡¼­ Æ÷¸ËÇÏ·Á¸é, ¡¸mformat a:¡¹¸í·ÉÀ» »ç¿ëÇϼ¼¿ä.)"
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"»õ·Î ¸¸µé¾îÁø ÆÄƼ¼ÇµéÀº Æ÷¸ËµÇ¾îÁ®¾ß ÇÕ´Ï´Ù.\n"
-"(Æ÷¸ËÀ̶ó ÇÔÀº ÆÄÀÏ ½Ã½ºÅÛÀ» ¸¸µç´Ù´Â ÀǹÌÀÔ´Ï´Ù.)\n"
-"\n"
-"Áö±Ý ±âÁ¸ÀÇ µ¥ÀÌÅ͸¦ »èÁ¦Çϱâ À§Çؼ­ ±âÁ¸ ÆÄƼ¼ÇµéÀ»\n"
-"´Ù½Ã Æ÷¸ËÇÒ ¼öµµ ÀÖ½À´Ï´Ù. ±×·¸°Ô ÇÏ°í ½Í´Ù¸é, ÇØ´ç ÆÄƼ¼Çµéµµ\n"
-"¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-"ÁÖÀÇ: ¸ðµç ±âÁ¸ ÆÄƼ¼ÇµéÀ» ´Ù½Ã Æ÷¸ËÇÒ ÇÊ¿ä´Â ¾ø½À´Ï´Ù.\n"
-"(¡¸/¡¹,¡¸/usr¡¹,¡¸/var¡¹¿Í °°Àº) ¿î¿µÃ¼Á¦¸¦ ´ã°í ÀÖ´Â ÆÄƼ¼ÇµéÀº\n"
-"´Ù½Ã Æ÷¸ËÇÏ´õ¶óµµ, (¡¸/home¡¹°ú °°Àº) µ¥ÀÌÅ͸¦ ´Ü°í ÀÖ´Â ÆÄƼ¼ÇµéÀº\n"
-", ±âÁ¸ µ¥ÀÌÅ͸¦ º¸Á¸ÇÏ°í ½ÍÀ» °æ¿ì, ´Ù½Ã Æ÷¸ËÇÒ ÇÊ¿ä°¡ ¾ø½À´Ï´Ù.\n"
-"\n"
-"ÆÄƼ¼ÇµéÀ» ¼±ÅÃÇÒ ¶§ ÁÖÀÇÇϼ¼¿ä. ÀÏ´Ü Æ÷ÆÑÀÌ µÇ°í³ª¸é,\n"
-"¼±Åõƴø ÆÄƼ¼Ç»ó¿¡ Á¸ÀçÇß´ø ¸ðµç µ¥ÀÌÅÍ´Â »èÁ¦µÇ¸ç,\n"
-"º¹±¸°¡ ºÒ°¡´ÉÇØ Áý´Ï´Ù.\n"
-"\n"
-"Æ÷¸ËÇÒ Áغñ°¡ µÇ¾úÀ¸¸é, ¡¸È®ÀΡ¹À» ´©¸£¼¼¿ä.\n"
-"\n"
-"¸Çµå·¹ÀÌÅ© ¸®´ª½º ¼³Ä¡¿ë ÆÄƼ¼ÇÀ» ´Ù½Ã ¼±ÅÃÇÏ°í ½Í´Ù¸é,\n"
-"¡¸Ãë¼Ò¡¹¸¦ ´©¸£¼¼¿ä.\n"
-"\n"
-"µð½ºÅ©»óÀÇ ¼Õ»óµÈ ºí·°À» üũÇϸç Æ÷¸ËÇÏ°í ½Í´Ù¸é,\n"
-"¡¸°í±Þ¡¹À» ´©¸£¼¼¿ä."
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Áö±Ý »õ ¸®´ª½º ¸Çµå·¹ÀÌÅ© ¿î¿µÃ¼Á¦¸¦ ¼³Ä¡ÇÏ°í ÀÖ½À´Ï´Ù.\n"
-"ÀÌ ÀÛ¾÷À» ³¡³»±â À§Çؼ­´Â ½Ã°£ÀÌ Á» °É¸³´Ï´Ù.\n"
-"ÃÑ¼Ò¿ä ½Ã°£Àº ¼±ÅÃÇÑ ÆÑÅ°ÁöÀÇ ¾ç°ú ÄÄÇ»ÅÍ ¼º´É¿¡ µû¶ó Å©°Ô ´Þ¶óÁú ¼ö ÀÖ½À´Ï"
-"´Ù.\n"
-"\n"
-"Àγ»½ÉÀ» °¡Áö¼¼¿ä."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"´õ ÁøÇàÇϱâ Àü¿¡ »ç¿ëÀÚ °è¾à¼­¸¦ ÀÚ¼¼ÇÏ°Ô ÀÐ¾î º¸¼¼¿ä.\n"
-"»ç¿ëÀÚ °è¾à¼­´Â Àüü ¸Çµå·¹ÀÌÅ© ¸®´ª½º ¹èÆ÷º»À» Æ÷°ýÇÏ´Â ³»¿ëÀ̸ç,\n"
-"¸¸¾à µ¿ÀÇÇÏÁö ¾ÊÀ¸½Å´Ù¸é ¡¸°ÅºÎ¡¹¹öÆ°À» ´©¸£¼¼¿ä. °ÅºÎ ¹öÆ°Àº ÇöÀç ¼³Ä¡¸¦\n"
-"Áï°¢ Á¾·áÇÏ°Ô ÇÕ´Ï´Ù. ¼³Ä¡¸¦ °è¼ÓÇÏ°í ½Í´Ù¸é ¡¸µ¿ÀÇ¡¹¹öÆ°À» ´©¸£¼¼¿ä."
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"ÀÌÁ¦ ÄÄÇ»ÅÍÀÇ º¸¾È ¼öÁØÀ» ¼±ÅÃÇÒ ´Ü°èÀÔ´Ï´Ù.\n"
-"ÀÚÀ¯·Î¿î »ç¿ëÀ» À§Çؼ­´Â ÄÄÇ»ÅÍ°¡ º¸´Ù ´õ ¸¹ÀÌ °³¹æµÇ¾îÁ®¾ß Çϸç,\n"
-"ÀúÀåµÈ µ¥ÀÌÅÍÀÇ Á߿伺ÀÌ Å©¸é Ŭ¼ö·Ï, ´õ ³ôÀº º¸¾È ¼öÁØÀÌ À¯ÁöµÇ¾î¾ß ÇÕ´Ï"
-"´Ù.\n"
-"±×·¯³ª ÀϹÝÀûÀ¸·Î º¸´Ù ³ôÀº º¸¾È ¼öÁØÀº º¸´Ù ¸¹Àº »ç¿ë»óÀÇ ºÒÆíÇÔÀ» °¨¼öÇؾß"
-"¸¸\n"
-"ÀÌ·ç¾îÁú ¼ö ÀÖÀ½À» À¯³äÇϼ¼¿ä. °¢ º¸¾È ¼öÁØÀÌ ÀǹÌÇÏ´Â ¹Ù¿¡ ´ëÇÑ ÀÚ¼¼ÇÑ Á¤º¸"
-"¸¦\n"
-"¾Ë°í ½Í´Ù¸é ¡¸»ç¿ëÀÚ Áöħ¼­¡¹ÀÇ MSEC ÀåÀ» ÂüÁ¶Çϼ¼¿ä.\n"
-"\n"
-"¾î´À °ÍÀ» ¼±ÅÃÇØ¾ß ÇÒÁö Àß ¸ð¸£°Ú´Ù¸é, ±âº»°ªÀ» À¯ÁöÇϼ¼¿ä."
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"ÀÌÁ¦ ¾î´À ÆÄƼ¼ÇÀÌ ¸Çµå·¹ÀÌÅ© ¸®´ª½ºÀÇ ¼³Ä¡¿ëÀ¸·Î »ç¿ëµÇ¾î¾ß ÇÒÁö¸¦\n"
-"¼±ÅÃÇØ¾ß ÇÕ´Ï´Ù. ÀÌÀü¿¡ ´Ù¸¥ GNU/¸®´ª½º¸¦ ¼³Ä¡ÇÑ ÀûÀÌ Àְųª, ´Ù¸¥ ÆÄƼ¼Ç\n"
-"µµ±¸¸¦ »ç¿ëÇÏ¿© ÀÌ¹Ì ÆÄƼ¼ÇµéÀÌ Á¤ÀǵǾî ÀÖ´Ù¸é, ±âÁ¸ ÆÄƼ¼ÇÀ» ±×´ë·Î »ç¿ë\n"
-"ÇÒ ¼ö ÀÖ½À´Ï´Ù. ±×·¸Áö ¾Ê´Ù¸é Çϵåµð½ºÅ©ÀÇ ÆÄƼ¼ÇµéÀ» Áö±Ý ¸¸µé¾î¾ß ÇÕ´Ï´Ù.\n"
-"\n"
-"ÆÄƼ¼ÇÀ» ¸¸µé·Á¸é, ¸ÕÀú Çϵåµð½ºÅ©¸¦ ¼±ÅÃÇϼ¼¿ä. ÆÄƼ¼ÇÀ» ¸¸µé¿©´Â Çϵåµð½ºÅ©"
-"°¡\n"
-"ù ¹ø° IDE µð½ºÅ©¶ó¸é ¡¸hda¡¹, µÎ ¹ø° IDE µð½ºÅ©¶ó¸é ¡¸hdb¡¹¿Í °°Àº ½ÄÀÌ"
-"¸ç,\n"
-"ù ¹ø° SCSI µð½ºÅ©¶ó¸é ¡¸sda¡¹¿Í °°Àº ½ÄÀÔ´Ï´Ù.\n"
-"\n"
-"ÆÄƼ¼ÇÀ» ³ª´­ ¶§, ´ÙÀ½ ¿É¼ÇÀ» »ç¿ëÇÒ ¼ö ÀÖ½À´Ï´Ù:\n"
-"\n"
-"  ¡Û ¡¸¸ðµÎ »èÁ¦¡¹: ¼±ÅÃµÈ µð½ºÅ©ÀÇ ¸ðµç ±âÁ¸ ÆÄƼ¼ÇÀ» »èÁ¦ÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸ÀÚµ¿ ÇҴ硹: ¼±ÅÃµÈ µð½ºÅ©ÀÇ ºó °ø°£¿¡ ÀÚµ¿À¸·Î EXT2¿Í ½º¿Ò ÆÄƼ¼ÇÀ»\n"
-"ÇÒ´çÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸ÆÄƼ¼Ç Å×ÀÌºí º¹±¸¡¹: ÆÄƼ¼Ç Å×À̺íÀÌ ¼Õ»óµÇ¾î ÀÖÀ» °æ¿ì, ÀÌ ¿É¼ÇÀ¸·Î\n"
-"¼Õ»êµÈ Å×À̺íÀ» º¹±¸ÇÕ´Ï´Ù. !!ÁÖÀÇ!! º¹±¸½Ãµµ°¡ ½ÇÆÐÇÒ ¼öµµ ÀÖ´Ù´Â °ÍÀ»\n"
-"¸í½ÉÇϼ¼¿ä.\n"
-"\n"
-"  ¡Û ¡¸µÇµ¹¸®±â¡¹: º¯°æ »çÇ×À» Ãë¼ÒÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸´Ù½Ã Àб⡹: ¸ðµç º¯°æ »çÇ×À» Ãë¼ÒÇÏ°í, Ãʱâ ÆÄƼ¼Ç Å×À̺íÀ» ´Ù½Ã ÀнÀ"
-"´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸¸¶¹ý»ç¡¹: ¸¶¹ý»ç¸¦ ½ÇÇàÇÏ¿© ÆÄƼ¼ÇÀ» ³ª´¯´Ï´Ù. ÆÄƼ¼Ç ³ª´©±â¿¡ ´ëÇÑ Áö"
-"½ÄÀÌ\n"
-"ºÎÁ·ÇÏ´Ù¸é, ÀÌ ¿É¼ÇÀ» »ç¿ëÇϼ¼¿ä.\n"
-"\n"
-"  ¡Û ¡¸Ç÷ÎÇǷκÎÅÍ º¹±¸¡¹: ÀÌÀü¿¡ Ç÷ÎÇÇ¿¡ ÀúÀåÇصРÆÄƼ¼Ç Á¤º¸À» »ç¿ëÇÏ¿©\n"
-"ÆÄƼ¼Ç Å×À̺íÀ» º¹±¸ÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸Ç÷ÎÇÇ¿¡ ÀúÀ塹: ÆÄƼ¼Ç Á¤º¸¸¦ Ç÷ÎÇÇ¿¡ ÀúÀåÇÕ´Ï´Ù. ´ÙÀ½¿¡ ÆÄƼ¼Ç Å×ÀÌ"
-"ºíÀ» º¹±¸ÇÒ\n"
-"ÀÏÀÌ »ý±æ ¶§ »ç¿ëµË´Ï´Ù. ÀÌ °úÁ¤À» ¼öÇàÇÒ °ÍÀ» ±ÇÀåÇÏ´Â ¹ÙÀÔ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸¿Ï·á¡¹: ÆÄƼ¼Ç ³ª´©±â ÀÛ¾÷À» ³¡¸¶Ä¡¸é, ÀÌ ¿É¼ÇÀ¸·Î º¯°æ »çÇ×À» ÀúÀåÇÕ´Ï"
-"´Ù.\n"
-"\n"
-"Á¤º¸: Å°º¸µå·Î ¿É¼ÇÀ» ¼±ÅÃÇÒ ¼öµµ ÀÖ½À´Ï´Ù. ÆÄƼ¼Çµé°£ÀÇ À̵¿Àº [Tab]Å°¿Í\n"
-"[Up/Down]Å°¸¦ »ç¿ëÇϼ¼¿ä.\n"
-"\n"
-"ÆÄƼ¼ÇÀ» ¼±ÅÃÇÏ°í ³­ ÈÄ¿¡´Â ´ÙÀ½ Å°¸¦ »ç¿ëÇÒ ¼ö ÀÖ½À´Ï´Ù:\n"
-"\n"
-"  ¡Û ¡¸Ctrl + c¡¹: (ºó ÆÄƼ¼ÇÀÌ ¼±ÅÃµÈ °æ¿ì,) »õ ÆÄƼ¼Ç ¸¸µé±â.\n"
-"\n"
-"  ¡Û ¡¸Ctrl + d¡¹: ÆÄƼ¼Ç »èÁ¦Çϱâ.\n"
-"\n"
-"  ¡Û ¡¸Ctrl + m¡¹: ¸¶¿îÆ® À§Ä¡ ÁöÁ¤Çϱâ.\n"
-"\n"
-"¸¸¾à PPC ÄÄÇ»ÅÍ¿¡¼­ ¼³Ä¡ÇÏ°í ÀÖ´Â ÁßÀ̶ó¸é, YABOOT ºÎÆ®·Î´õ°¡ »ç¿ëÇÒ ÃÖ¼Ò "
-"1MB\n"
-"ÀÇ HFS ¡¸ºÎÆ®½ºÆ®·¦¡¹ÆÄƼ¼ÇÀ» ¸¸µé ÇÊ¿ä°¡ ÀÖ½À´Ï´Ù. ¸¸¾à ±× ÆÄƼ¼ÇÀ» º¸´Ù Å©"
-"°Ô\n"
-"(°¡·É, 50MB) ¸¸µé¸é, ÀÀ±Þ »óȲ½Ã¿¡ »ç¿ëÇÒ ¿©ºÐÀÇ Ä¿³Î°ú ·¥µð½ºÅ© À̹ÌÁö¸¦\n"
-"ÀúÀåÇÒ ¼ö ÀÖ´Â À¯¿ëÇÑ Àå¼Ò°¡ µÉ °ÍÀÔ´Ï´Ù."
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"µÑ ÀÌ»óÀÇ MS À©µµ¿ìÁî ÆÄƼ¼ÇÀÌ µð½ºÅ©»ó¿¡¼­ ¹ß°ßµÇ¾ú½À´Ï´Ù.\n"
-"¸Çµå·¹ÀÌÅ© ¸®´ª½º ¿î¿µÃ¼Á¦¸¦ ¼³Ä¡Çϱâ À§ÇØ Å©±â¸¦ Á¶Á¤ÇÒ\n"
-"ÆÄƼ¼ÇÀ» ¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-"°¢ ÆÄƼ¼ÇÀº ´ÙÀ½°ú °°ÀÌ ¿­°ÅµË´Ï´Ù: ¡¸¸®´ª½º À̸§¡¹,¡¸À©µµ¿ìÁî À̸§¡¹,\n"
-"¡¸¿ë·®¡¹.\n"
-"\n"
-"¡¸¸®´ª½º À̸§¡¹¿µ¿ªÀÇ ±¸Á¶: ¡¸Çϵåµð½ºÅ© À¯Çü¡¹,¡¸Çϵåµð½ºÅ© ¹øÈ£¡¹,\n"
-"¡¸ÆÄƼ¼Ç ¹øÈ£¡¹(°¡·É, ¡¸hda1¡¹).\n"
-"\n"
-"¡¸Çϵåµð½ºÅ© À¯Çü¡¹Àº, IDE µð½ºÅ©ÀÏ °æ¿ì¿¡´Â ¡¸hd¡¹À̸ç,\n"
-"SCSI µð½ºÅ©ÀÏ °æ¿ì¿¡´Â ¡¸sd¡¹ÀÔ´Ï´Ù.\n"
-"\n"
-"¡¸Çϵåµð½ºÅ© ¹øÈ£¡¹´Â Ç×»ó ¡¸hd¡¹¶Ç´Â ¡¸sd¡¹µÚ¿¡ ¿À´Â ¹®ÀÚÀÔ´Ï´Ù.\n"
-"IDE Çϵåµð½ºÅ©ÀÇ °æ¿ì:\n"
-"\n"
-"  ¡Û ¡¸a¡¹´Â ¡¸ÁÖ IDE Á¦¾î±â»óÀÇ ÁÖ µð½ºÅ©¡¹¸¦ ÀǹÌÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸b¡¹´Â ¡¸ÁÖ IDE Á¦¾î±â»óÀÇ º¸Á¶ µð½ºÅ©¡¹¸¦ ÀǹÌÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸c¡¹´Â ¡¸º¸Á¶ IDE Á¦¾î±â»óÀÇ ÁÖ µð½ºÅ©¡¹¸¦ ÀǹÌÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸d¡¹´Â ¡¸º¸Á¶ IDE Á¦¾î±â»óÀÇ º¸Á¶ µð½ºÅ©¡¹¸¦ ÀǹÌÇÕ´Ï´Ù.\n"
-"\n"
-"SCSI Çϵåµð½ºÅ©ÀÇ °æ¿ì, ¡¸a¡¹´Â ¡¸ÃÖ¼Ò SCSI ID¡¹, ¡¸b¡¹´Â ¡¸´ÙÀ½ ÃÖ¼Ò SCSI "
-"ID¡¹\n"
-"¿Í °°Àº ½ÄÀ¸·Î Àǹ̸¦ °¡Áý´Ï´Ù.\n"
-"¡¸À©µµ¿ìÁî À̸§¡¹Àº MS À©µµ¿ìÁîÇÏ¿¡¼­ÀÇ À̸§ÀÔ´Ï´Ù.\n"
-"(°¡·É, ù ¹ø° µð½ºÅ© ¶Ç´Â ÆÄƼ¼ÇÀº ¡¸C:¡¹ÀÔ´Ï´Ù.)"
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "±â´Ù·Á ÁÖ¼¼¿ä. ÀÌ ÀÛ¾÷Àº ¸î ºÐÀÇ ½Ã°£ÀÌ °É¸³´Ï´Ù."
-
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"ÀÌÁ¦ ´ÔÀº ±âº»¼³Ä¡(¡¸±ÇÀ塹) ¹æ¹ý°ú º¸´Ù ½ÉµµÀÖ´Â ¼±ÅÃÀ» ÇÒ ¼ö ÀÖ´Â\n"
-"¡¸Àü¹®°¡¡¹¼³Ä¡ ¹æ¹ý Áß Çϳª¸¦ ¼±ÅÃÇÒÁö °áÁ¤ÇØ¾ß¾ß ÇÕ´Ï´Ù. ¶ÇÇÑ »õ·Î¿î ¼³Ä¡"
-"¿Í\n"
-"±âÁ¸ÀÇ ¸®´ª½º ¸Çµå·¹ÀÌÅ© ½Ã½ºÅÛÀÇ ¾÷±×·¹À̵å Áß Çϳª¸¦ ¼±ÅÃÇÒ ¼öµµ ÀÖ½À´Ï"
-"´Ù.\n"
-"ÇöÀç ´ÔÀÇ »óȲ¿¡ ÀûÀýÇÑ °ÍÀ» ¼±ÅÃÇϼ¼¿ä.¡¸¼³Ä¡¡¹¸¦ ¼±ÅÃÇÏ°Ô µÇ¸é\n"
-"±âÁ¸ÀÇ ½Ã½ºÅÛÀ» ¿ÏÀüÈ÷ »èÁ¦ÇÏ°í ´Ù½Ã ¼³Ä¡ÇÏ°Ô µË´Ï´Ù. ¡¸¾÷±×·¹À̵塹¸¦\n"
-"¼±ÅÃÇÏ°Ô µÇ¸é ±âÁ¸ÀÇ ½Ã½ºÅÛÀ» ÃֽŠ½Ã½ºÅÛÀ¸·Î ¾÷±×·¹À̵å ÇÕ´Ï´Ù.\n"
-"\n"
-"¸¸¾à ÀÌÀü ¹öÀüÀÇ ¸®´ª½º ¸Çµå·¹ÀÌÅ©°¡ ¼³Ä¡µÇ¾î ÀÖÁö ¾Ê°Å³ª, \n"
-"¿©·¯ ¿î¿µÃ¼Á¦¸¦ ÇÔ²² »ç¿ëÇÏ°í ½Í´Ù¸é, ¡¸¼³Ä¡¡¹¸¦ ´©¸£¼¼¿ä.\n"
-"\n"
-"¸¸¾à ÀÌ¹Ì ¼³Ä¡µÈ ÀÌÀü ¹öÀüÀÇ ¸®´ª½º ¸Çµå·¹ÀÌÅ©¸¦ ¾÷µ¥ÀÌÆ®ÇÏ·Á¸é,\n"
-" ¡¸¾÷µ¥ÀÌÆ®¡¹¸¦ ´©¸£¼¼¿ä.\n"
-"\n"
-"´ÔÀÇ GNU/Linux¿¡ ´ëÇÑ Áö½Ä ¼öÁØ¿¡ µû¶ó, ´ÔÀÇ ¸®´ª½º ¸Çµå·¹ÀÌÅ©¸¦\n"
-"¼³Ä¡ ¶Ç´Â ¾÷µ¥ÀÌÆ®ÇÏ´Â ´ÙÀ½°ú °°Àº ¹æ¹ýÀ» ¼±ÅÃÇÒ ¼ö ÀÖ½À´Ï´Ù:\n"
-"\n"
-" ¡Û ±ÇÀå: ¸¸¾à ´ÔÀÌ GNU/Linux¸¦ »ç¿ëÇØ º» °æÇèÀÌ ¾ø´Ù¸é, ÀÌ°ÍÀ» ¼±ÅÃÇϼ¼¿ä.\n"
-"¼³Ä¡°úÁ¤Àº ¾ÆÁÖ ½±°í ´ÔÀº ¸î °³ÀÇ Áú¹®¿¡¸¸ ´äÇÏ¸é µË´Ï´Ù.\n"
-"\n"
-" ¡Û Àü¹®°¡: ¸¸¾à ´ÔÀÌ GNU/Linux¿¡ ´ëÇÑ ´ë´ÜÇÑ Áö½ÄÀ» °¡Áö°í ÀÖ´Ù¸é, ÀÌ°ÍÀ» ¼±"
-"ÅÃÇϼ¼¿ä.\n"
-"¡¸»ç¿ëÀÚ Á¤ÀÇ¡¹ ¼³Ä¡Ã³·³ ÁÖ¿ëµµ(¿öÅ©½ºÅ×À̼Ç, ¼­¹ö, °³¹ß)À» ¼±ÅÃÇÒ ¼ö ÀÖ½À´Ï"
-"´Ù. \n"
-"ÀÌ°ÍÀ» ¼±ÅÃÇϱ⿡ ¾Õ¼­ ¸Å¿ì ÁÖÀÇÇϼ¼¿ä. ´ÔÀº °íµµÀÇ »ç¿ëÀÚ Á¤ÀÇ ¼³Ä¡¸¦ ¼öÇàÇÏ"
-"°Ô µË´Ï´Ù.\n"
-"GNU/Linux¿¡ ´ëÇؼ­ Àß ¸ð¸¥´Ù¸é, Áú¹®¿¡ ´äÇϱⰡ ¸Å¿ì ¾î·Á¿ï ¼ö ÀÖ½À´Ï´Ù.\n"
-"µû¶ó¼­ È®½ÅÀÌ ¼­Áö ¾Ê´Â´Ù¸é ÀÌ ¼³Ä¡¹æ¹ýÀ» ¼±ÅÃÇÏÁö ¸¶¼¼¿ä."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"ÀϹÝÀûÀ¸·Î, µå·¹ÀÌÅ©X´Â (´ÔÀÌ ¼±ÅÃÇÑ ¾ð¾î¿¡ ±â¹ÝÇÏ¿©) ¿Ã¹Ù¸¥ Å°º¸µå¸¦\n"
-"ÀÚµ¿À¸·Î ¼±ÅÃÇÕ´Ï´Ù. ±×·¯³ª ´ÔÀÌ »ç¿ëÇÏ´Â ¾ð¾î¿¡ Á¤È®È÷ ÀÏÄ¡ÇÏ´Â Å°º¸µå¸¦\n"
-"°¡Áö°í ÀÖÁö ¾Ê´Â °æ¿ìµµ ÀÖÀ» ¼ö ÀÖ½À´Ï´Ù: °¡·É, ¿µ¾î¸¦ »ç¿ëÇÏ´Â ½ºÀ§½ºÀÎÀº\n"
-"¿©ÀüÈ÷ ½ºÀ§½º Å°º¸µå¸¦ ¿øÇÒ ¼öµµ ÀÖ½À´Ï´Ù. ¶ÇÇÑ ¿µ¾î¸¦ »ç¿ëÇÏÁö¸¸, ij³ª´Ù Äù"
-"º¤ÁÖ¿¡\n"
-"»ì°í ÀÖ´Ù¸é ¶ÇÇÑ ÀÌ·¯ÇÑ °æ¿ì°¡ µÉ °ÍÀÔ´Ï´Ù. ÀÌ·±·ùÀÇ °æ¿ì¶ó¸é, ÀÌ ´Ü°è¿¡¼­\n"
-"Àû´çÇÑ Å°º¸µå¸¦ ¸ñ·Ï¿¡¼­ ¼±ÅÃÇØ¾ß ÇÕ´Ï´Ù.\n"
-"\n"
-"Áö¿øµÇ´Â ¸ðµç Å°º¸µå ¸ñ·ÏÀ» º¸·Á¸é, ¡¸Ãß°¡Á¤º¸¡¹¸¦\n"
-"´©¸£¼¼¿ä."
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-"¼³Ä¡½Ã ±×¸®°í ½Ã½ºÅÛ¿ëÀ¸·Î »ç¿ëÇÒ ¾ð¾î¸¦ ¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-"¡¸°í±Þ¡¹À» ´©¸£¸é, ´Ù¸¥ ¾ð¾îµµ Ãß°¡·Î ¼±ÅÃÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-"´Ù¸¥ ¾ð¾îµµ ¼±ÅÃÇÏ°Ô µÇ¸é, ±× ¾ð¾î¿Í °ü·ÃµÈ ½Ã½ºÅÛ ¹®¼­ ¹× ÇÁ·Î±×·¥ ÆÄÀϵé"
-"µµ\n"
-"¼³Ä¡ÇÏ°Ô µË´Ï´Ù. °¡·É, ´ÔÀÇ ½Ã½ºÅÛÀ» ÀϺ»Àεµ »ç¿ëÇÒ ¼ö ÀÖµµ·Ï ÇÏ°í ½Í´Ù¸é,\n"
-"¸ñ·Ï¿¡¼­ ÁÖ ¾ð¾î·Î ¡¸Çѱ¹¾î¡¹¸¦ ¼±ÅÃÇÏ°í, ¡¸°í±Þ¡¹¿¡¼­ ¡¸ÀϺ»¾î¡¹¿¡ ÇØ´çÇÏ"
-"´Â\n"
-"ȸ»ö º°Ç¥¸¦ ¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-"¿©·¯°³ÀÇ Ãß°¡ ¾ð¾î¸¦ ¼±ÅÃÇÒ ¼öµµ ÀÖ½À´Ï´Ù. ¾ð¾î ¼±ÅÃÀ» ³¡¸¶ÃÆÀ¸¸é,\n"
-"¡¸È®ÀΡ¹À» ´­·¯¼­ °è¼Ó ÁøÇàÇϼ¼¿ä."
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-"±âº»ÀûÀ¸·Î µå·¹ÀÌÅ©X´Â ´ÔÀÌ 2¹öÆ° ¸¶¿ì½º¸¦ »ç¿ëÇÑ´Ù°í °¡Á¤ÇÒ °ÍÀ̸ç,\n"
-"¼¼ ¹ø° ¹öÆ°Àº ¿¡¹Ä·¹À̼ÇÇÒ °ÍÀÔ´Ï´Ù. ¸¶¿ì½º°¡ PS/2, ½Ã¸®¾ó, ȤÀº USB¿ëÀÎÁö"
-"´Â\n"
-"µå·¹ÀÌÅ©X°¡ ÀÚµ¿À¸·Î ¾Ë¾Æ³¾ ¼ö ÀÖ½À´Ï´Ù.\n"
-"\n"
-"¸¸¾à ´Ù¸¥ ¸¶¿ì½º À¯ÇüÀ» ÁöÁ¤ÇÏ°í ½Í´Ù¸é, Á¦°øµÇ´Â ¸ñ·Ï¿¡¼­ Àû´çÇÑ °ÍÀ»\n"
-"¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-"¸¸¾à ´Ù¸¥ ¸¶¿ì½º¸¦  ¼±ÅÃÇÏ°Ô µÇ¸é, ¸¶¿ì½º Å×½ºÆ® È­¸éÀ» º¸°ÔµÉ °ÍÀÔ´Ï´Ù.\n"
-"±×·¯¸é, ¸¶¿ì½º ¹öÆ°°ú ÈÙÀ» Á¶ÀÛÇÏ¿© ¼³Á¤ÀÌ Á¤È®ÇÏ°Ô µÇ¾ú´ÂÁö È®ÀÎÇϼ¼¿ä.\n"
-"¸¸¾à Á¦´ë·Î ÀÛµ¿Çϱ⠾ÊÀ¸¸é,¡¸Ãë¼Ò¡¹¹öÆ° À§¿¡¼­ ½ºÆäÀ̽º Å°³ª ¿£ÅÍ Å°¸¦\n"
-"´©¸£°í ´Ù½Ã ¼±ÅÃÇϽñ⠹ٶø´Ï´Ù."
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Á¤È®ÇÑ Æ÷Æ®¸¦ ¼±ÅÃÇϼ¼¿ä. ¿¹¸¦ µé¾î, MS À©µµ¿ìÁî¿¡¼­ COM1Àº\n"
-"¸®´ª½º¿¡¼­´Â ttyS0·Î ¸í¸íµË´Ï´Ù."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO(¸®´ª½º ·Î´õ)¿Í GRUBÀº ºÎÆ® ·Î´õÀÔ´Ï´Ù: À̰͵éÀº ½Ã½ºÅÛ»óÀÇ\n"
-"GBU/¸®´ª½º ¶Ç´Â ´Ù¸¥ ¿î¿µÃ¼Á¦¸¦ ºÎÆýÃÅ°´Âµ¥ »ç¿ëµË´Ï´Ù.\n"
-"ÀϹÝÀûÀ¸·Î, ¸®´ª½º°¡ ¾Æ´Ñ ´Ù¸¥ ¿î¿µÃ¼Á¦µµ ÀÚµ¿À¸·Î °¨ÁöµÇ¾î\n"
-"¼³Á¤µË´Ï´Ù. ±×·¯³ª ¸¸¾à ±×·¸Áö ¸øÇÑ °æ¿ì, ¿©±â¼­ Á÷Á¢ Ç׸ñÀ»\n"
-"Ãß°¡ÇÒ ¼ö ÀÖ½À´Ï´Ù. Á¤È®ÇÑ ÀÎÀÚ°ªÀ» ¼±ÅÃÇϵµ·Ï ÁÖÀÇÇϼ¼¿ä.\n"
-"\n"
-"¶ÇÇÑ ´Ù¸¥ »ç¶÷ÀÌ Æ¯Á¤ ¿î¿µÃ¼Á¦¸¦ ºÎÆÃÇÏ´Â °ÍÀ» ¸·°í ½ÍÀ» ¼öµµ\n"
-"ÀÖÀ» °ÍÀÔ´Ï´Ù. ±×·± °æ¿ì, ÇØ´ç Ç׸ñÀ» Áö¿ì¼¼¿ä. ±×·¯³ª ±×·¸°ÔÇϸé,\n"
-"±× ¿î¿µÃ¼Á¦¸¦ ºÎÆÃÇϱâ À§Çؼ­´Â ºÎÆà µð½ºÅ©°¡ ÀÖ¾î¾ß ÇÕ´Ï´Ù!"
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"GNU/¸®´ª½º¸¦ ºÎÆÃÇϴµ¥ ÇÊ¿äÇÑ Á¤º¸¸¦  ¾îµð¿¡ À§Ä¡½Ãų °ÍÀÎÁö\n"
-"ÁöÁ¤ÇØ ÁÖ¼¼¿ä.\n"
-"\n"
-"Áö±Ý ¹«¾ùÀ» ¹¯°í ÀÖ´ÂÁö Á¶Â÷ ¸ð¸£°Ú´Ù¸é,\n"
-"¡¸µð½ºÅ©ÀÇ Ã¹ ¼½ÅÍ(MBR)¡¹¸¦ ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"µå·¹ÀÌÅ©X°¡ ½Ã½ºÅÛ»ó¿¡ ÀÖ´Â ¸ðµç ÇÏµå µð½ºÅ©¸¦ °Ë»öÇÏ°í\n"
-"¶ÇÇÑ PCI SCSI ¾î´ðÅÍ Å½Áö¸¦ ½ÃµµÇÒ °ÍÀÔ´Ï´Ù.\n"
-"¸¸¾à µå·¹ÀÌÅ©X°¡ ÀåÄ¡¸¦ ¹ß°ßÇÏ°Ô µÇ¸é ÀÚµ¿À¸·Î\n"
-"¿Ã¹Ù¸¥ µå¶óÀ̹ö¸¦ ¼³Ä¡ÇÒ °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"µå·¹ÀÌÅ©XÀÇ ÀåÄ¡ °Ë»öÀÌ ½ÇÆÐÇÏ´õ¶óµµ, ´Ô²² SCSI ÀåÄ¡ÀÇ À¯¹«¸¦ Áú¹®ÇÏ°Ô µË´Ï"
-"´Ù.\n"
-"¸ñ·Ï¿¡¼­ ÀåÄ¡¸¦ Á÷Á¢ ¼±ÅÃÇÏ·Á¸é ¡¸¿¹¡¹¸¦, SCSI ÀåÄ¡°¡ ¾ø´Ù¸é ¡¸¾Æ´Ï¿À¡¹¸¦ ¼±"
-"ÅÃÇϼ¼¿ä.\n"
-"Àß ¸ð¸£°Ú´Ù¸é, ¡¸Çϵå¿þ¾î Á¤º¸ º¸±â¡¹¸¦ ¼±ÅÃÇÑ ÈÄ ¡¸È®ÀΡ¹À» ´­·¯¼­\n"
-"½Ã½ºÅÛ»ó¿¡ Á¸ÀçÇÏ´Â Çϵå¿þ¾îµéÀ» »ìÆ캼 ¼öµµ ÀÖ½À´Ï´Ù.\n"
-"Çϵå¿þ¾î¿¡ ´ëÇÑ °ËÅä°¡ ³¡³ª¸é ´Ù½Ã ¡¸È®ÀΡ¹¹öÆ°À» ´­·¯¼­ SCSI ÀÎÅÍÆäÀ̽º Áú"
-"¹® È­¸é\n"
-"À¸·Î µ¹¾Æ ¿Ã ¼ö ÀÖ½À´Ï´Ù.\n"
-"\n"
-"Á÷Á¢ ¾î´ðÅ͸¦ ÁöÁ¤ÇØ¾ß ÇÒ ¶§¿¡´Â, µå·¹ÀÌÅ©X°¡ ¿É¼ÇÀ» ÁöÁ¤ÇÒ °ÍÀÎÁö¸¦ ¹°¾î\n"
-"º¼ °ÍÀÔ´Ï´Ù. ÀÌ ¶§´Â µå·¹ÀÌÅ©X°¡ ÇÊ¿äÇÑ ¿É¼ÇÀ» ŽÁöÇϵµ·Ï ÇÏ´Â °ÍÀÌ ÁÁ½À´Ï"
-"´Ù.\n"
-"ÀϹÝÀûÀ¸·Î ÀÌ ¹æ¹ýÀº Àß ÀÛµ¿ÇÕ´Ï´Ù.\n"
-"\n"
-"\n"
-"¸¸¾à ±×·¸Áö ¾Ê´Ù¸é, Á÷Á¢ µå¶óÀ̹ö ¿É¼ÇÀ» ÁöÁ¤ÇØ¾ß ÇÕ´Ï´Ù. »ç¿ëÀÚ ¼³¸í¼­(3"
-"Àå, \n"
-"¡¸Çϵå¿þ¾î¿¡ ´ëÇÑ Á¾ÇÕÁ¤º¸¡¹»ö¼Ç)¸¦ ÂüÁ¶ÇÏ¿©, Çϵå¿þ¾î ¼³¸í¼­, \n"
-"(ÀÎÅͳݿ¡ ¿¬°áÇÒ ¼ö ÀÖ´Ù¸é) Á¦Á¶¾÷ü À¥ »çÀÌÆ®, \n"
-"¶Ç´Â (À©µµ¿ìÁî°¡ ¼³Ä¡µÇ¾î ÀÖ´Ù¸é) MS À©µµ¿ìÁî¿¡¼­ ¾î¶»°Ô ¿©±â¿¡ ÇÊ¿äÇÑ \n"
-"Á¤º¸¸¦ ¾Ë¾Æ ³¾ ¼ö ÀÖ´ÂÁö ã¾Æ º¸¼¼¿ä."
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-"´ÔÀÇ ½Ã½ºÅÛ¿¡ °üÇÑ ´Ù¾çÇÑ ÀÎÀÚµéÀ» º¸ÀÌ°í ÀÖ½À´Ï´Ù. ¼³Ä¡µÈ Çϵå¿þ¿¡ µû¶ó\n"
-"¾Æ·¡¿¡ ¼³¸íµÇ´Â Ç׸ñµé Áß ÀϺδ º¸ÀÌÁö ¾ÊÀ» ¼ö ÀÖ½À´Ï´Ù:\n"
-"\n"
-"  ¡Û ¡¸¸¶¿ì½º¡¹: ÇöÀç ¸¶¿ì½º ¼³Á¤À» È®ÀÎÇÏ°í, ÇÊ¿äÇÏ´Ù¸é Ŭ¸¯ÇÏ¿©\n"
-"¸¶¿ì½º¸¦ º¯°æÇϼ¼¿ä.\n"
-"\n"
-"  ¡Û ¡¸Å°º¸µå¡¹: ÇöÀç Å°º¸µå ¸ÊÀ» È®ÀÎÇÏ°í, ÇÊ¿äÇÏ´Ù¸é Ŭ¸¯ÇÏ¿©\n"
-"Å°º¸µå¸¦ º¯°æÇϼ¼¿ä.\n"
-"\n"
-"  ¡Û ¡¸Áö¿ª½Ã°£´ë¡¹: µå·¹ÀÌÅ©X´Â ´ÔÀÌ ¼±ÅÃÇÑ ¾ð¾î¿¡ µû¶ó ÀÚµ¿À¸·Î\n"
-"Áö¿ª½Ã°£´ë¸¦ ¼±ÅÃÇÕ´Ï´Ù. ±×·¯³ª, Å°º¸µåµµ ±×·¯ÇÏÁö¸¸, ´ÔÀº ÇöÀç ¼±ÅõÈ\n"
-"¾ð¾î¿Í ÀÏÄ¡ÇÏ´Â ±¹°¡¿¡ °ÅÁÖÇÏ°í ÀÖÁö ¾ÊÀ» ¼öµµ ÀÖ½À´Ï´Ù.\n"
-"±×·¯ÇÏ´Ù¸é, ¡¸Áö¿ª½Ã°£´ë¡¹¸¦ Ŭ¸¯ÇÏ¿©, ´ÔÀÌ ÇöÀç °ÅÁÖÇÏ°í ÀÖ´Â\n"
-"Áö¿ªÀÇ ½Ã°£´ë¿¡ ¸Â°Ô ½Ã°£À» ¼³Á¤Çϼ¼¿ä.\n"
-"\n"
-"  ¡Û ¡¸ÇÁ¸°ÅÍ¡¹: ¡¸ÇÁ¸°ÅÍ ¾øÀ½¡¹À» ´©¸£¸é, ÇÁ¸°ÅÍ ¼³Á¤ ¸¶¹ý»ç°¡\n"
-"½ÃÀÛµÉ °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸»ç¿îµå Ä«µå¡¹: ¸¸¾à »ç¿îµå Ä«µå°¡ °¨ÁöµÇ¾ú´Ù¸é, ¿©±â¿¡ ³ªÅ¸³¯\n"
-"°ÍÀÔ´Ï´Ù. ¼³Ä¡ Áß¿¡ º¯°æÇÏ´Â °ÍÀº ºÒ°¡´ÉÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸TV Ä«µå¡¹: ¸¸¾à TV Ä«µå°¡ °¨ÁöµÇ¾ú´Ù¸é, ¿©±â¿¡ ³ªÅ¸³¯ °ÍÀÔ´Ï´Ù.\n"
-"¼³Ä¡ Áß¿¡ º¯°æÇÏ´Â °ÍÀº ºÒ°¡´ÉÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸ISDN Ä«µå¡¹: ¸¸¾à ISDN Ä«µå°¡ °¨ÁöµÇ¾ú´Ù¸é, ¿©±â¿¡ ³ªÅ¸³¯\n"
-"°ÍÀÔ´Ï´Ù. ¹öÆ°À» Ŭ¸¯ÇÏ¿© °ü·Ã ÀÎÀÚÀ» º¯°æÇÒ ¼öµµ\n"
-"ÀÖ½À´Ï´Ù."
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"¸Çµå·¹ÀÌÅ© ¸®´ª½º ÆÄƼ¼ÇÀ» ¸¸µé±â À§Çؼ­ »èÁ¦ÇÒ Çϵåµð½ºÅ¬¸£ ¼±ÅÃÇϼ¼¿ä.\n"
-"ÁÖÀÇ:\n"
-"µð½ºÅ©»óÀÇ ¸ðµç µ¥ÀÌÅÍ´Â ¼Õ½ÇµÇ¸ç, ¿µ¿øÈ÷ º¹±¸°¡ ºÒ°¡´ÉÇØ Áý´Ï´Ù!"
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"ÀÌ Çϵåµð½ºÅ©»óÀÇ ¸ðµç µ¥ÀÌÅÍ¿Í ÆÄƼ¼ÇÀ» »èÁ¦ÇÏ·Á¸é, ¡¸È®ÀΡ¹À» ´©¸£¼¼¿ä.\n"
-"!!ÁÖÀÇÇϼ¼¿ä!!ÀÏ´Ü ¡¸È®ÀΡ¹À» ´©¸£°Ô µÇ¸é, MS À©µµ¿ìÁî µ¥ÀÌÅи£ Æ÷ÇÔÇÏ¿© ÀÌ "
-"µð½ºÆ®»óÀÇ ¸ðµç\n"
-"µ¥ÀÌÅÍ¿Í ÆÄƼ¼ÇÀº º¹±¸°¡ ºÒ°¡´ÉÇØ Áý´Ï´Ù.\n"
-"\n"
-"ÀÌ ÀÛ¾÷À» Ãë¼ÒÇÏ·Á¸é, Áö±Ý ¡¸Ãë¼Ò¡¹¸¦ ´©¸£¼¼¿ä. ¾î¶°ÇÑ µ¥ÀÌÅÍ¿Í ÆÄƼ¼Çµµ\n"
-"¼Õ»óµÇÁö ¾ÊÀ» °ÍÀÔ´Ï´Ù."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr "Ä¿³Î°ú ÀÏÄ¡ÇÏ´Â ¸ðµâ¿¡ Á¢±ÙÇÒ ¼ö ¾ø½À´Ï´Ù.(ÆÄÀÏ %s°¡ ¾ø½¿)"
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"´ÙÀ½°ú °°Àº ¼­¹öµéÀÌ ¼±ÅõǾú½À´Ï´Ù: %s\n"
-"\n"
-"\n"
-"ÀÌ ¼­¹öµéÀº ±âº»ÀûÀ¸·Î È°¼ºÈ­µË´Ï´Ù. ºñ·Ï ¾ÆÁ÷±îÁö ¾Ë·ÁÁø º¸¾È ¹®Á¦´Â ¾øÁö"
-"¸¸,\n"
-"»õ·Î¿î ¹®Á¦Á¡ÀÌ ¹ß°ßµÉ ¼öµµ ÀÖ½À´Ï´Ù. ±×·² °æ¿ì¿¡´Â °¡´ÉÇÑ ÇÑ ½Å¼ÓÇÏ°Ô\n"
-"¾÷±×·¹À̵åÇØ¾ß ÇÕ´Ï´Ù.\n"
-"\n"
-"\n"
-"Á¤¸»·Î ÀÌ ¼­¹öµéÀ» ¼³Ä¡Çմϱî?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "NIS µµ¸ÞÀÎ ¾øÀÌ´Â ºê·ÎµåÄɽºÆ®¸¦ »ç¿ëÇÒ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ç÷ÎÇÇ µð½ºÅ©¸¦ %s µå¶óÀ̺꿡 ³ÖÀ¸¼¼¿ä"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "ÀÌ Ç÷ÎÇÇ µð½ºÅ©´Â FAT Æ÷¸ËÀÌ ¾Æ´Õ´Ï´Ù."
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"ÀÌ ÀúÀåµÈ ÆÑÅ°Áö ¼±Åøñ·ÏÀ» »ç¿ëÇÒ·Á¸é, ``linux defcfg=floppy''¶ó°í ÀÔ·ÂÇÏ¿© "
-"¼³Ä¡À» ½ÃÀÛÇϼ¼¿ä."
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "%s ÆÄÀÏÀ» ÀдÂÁß ¿À·ù°¡ ¹ß»ýÇß½À´Ï´Ù."
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "È®ÀÎ"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"¡¸»ó¾÷¿ë¡¹µå¶óÀ̹ö¸¦ ÇÊ¿ä·ÎÇÏ´Â ÀϺΠÇϵå¿þ¾î°¡ ½Ã½ºÅÛ»ó¿¡ ÀÖ½À´Ï´Ù.\n"
-"ÀÚ¼¼ÇÑ Á¤º¸´Â ´ÙÀ½À» ÂüÁ¶Çϼ¼¿ä: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"·çÆ® ÆÄƼ¼ÇÀÌ ¹Ýµå½Ã ÇÊ¿äÇÕ´Ï´Ù.\n"
-"À̸¦ À§Çؼ­, ÆÄƼ¼ÇÀ» »ý¼ºÇϼ¼¿ä. (ÀÌ¹Ì ÀÖ´Â ÆÄƼ¼ÇÀ» Ŭ¸¯Çϰųª).\n"
-"±×¸®°í ³ª¼­, ``¸¶¿îÆ® À§Ä¡''¸¦ Ŭ¸¯ÇÑÈÄ '/'À¸·Î ¼³Á¤Çϼ¼¿ä."
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "½º¿Ò ÆÄƼ¼ÇÀº ¹Ýµå½Ã ÇÊ¿äÇÕ´Ï´Ù."
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"½º¿Ò ÆÄƼ¼ÇÀÌ ¾ø½À´Ï´Ù.\n"
-"\n"
-"°è¼Ó ÁøÇàÇմϱî?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "¡¸/boot/efi¡¹¿¡ ¸¶¿îÆ®µÈ FAT ÆÄƼ¼ÇÀÌ ÀÖ¾î¾ß¸¸ ÇÕ´Ï´Ù."
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "ºó °ø°£ »ç¿ë"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "»õ·Î¿î ÆÄƼ¼ÇÀ» ¸¸µé ¼ö ÀÖ´Â °ø°£ÀÌ ºÎÁ·ÇÕ´Ï´Ù."
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "±âÁ¸ÀÇ ÆÄƼ¼Ç »ç¿ë"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "»ç¿ëÇÒ ±âÁ¸ÀÇ ÆÄƼ¼ÇÀÌ ¾ø½À´Ï´Ù."
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "À©µµ¿ìÁî ÆÄƼ¼ÇÀ» ·çÇÁ¹éÀ¸·Î »ç¿ë"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "¾î´À ÆÄƼ¼ÇÀ» Linux4Win¿ëÀ¸·Î »ç¿ëÇÏ°Ú½À´Ï±î?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Å©±â ¼±ÅÃ"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "·çÆ® ÆÄƼ¼Ç Å©±â(MB): "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "½º¿Ò ÆÄƼ¼Ç Å©±â(MB): "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "À©µµ¿ìÁî ÆÄƼ¼ÇÀÇ ºó °ø°£ »ç¿ëÇϼ¼¿ä."
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "¾î¶² ÆÄƼ¼ÇÀÇ Å©±â¸¦ Á¶Á¤ÇϽðڽÀ´Ï±î?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "À©µµ¿ìÁî ÆÄÀÏ ½Ã½ºÅÛÀÇ ¹üÀ§ °è»êÁß"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT Å©±â Á¶Á¤±â°¡ ´ÔÀÇ ÆÄƼ¼ÇÀ» ó¸®ÇÒ ¼ö ¾ø½À´Ï´Ù.\n"
-"´ÙÀ½ÀÇ ¿À·ù°¡ ¹ß»ýÇß½À´Ï´Ù: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"À©µµ¿ìÁî ÆÄƼ¼ÇÀÌ ½ÉÇÏ°Ô Á¶°¢³ª ÀÖ½À´Ï´Ù. ¸ÕÀú ``µð½ºÅ© Á¶°¢ ¸ðÀ½''À» Çϼ¼¿ä."
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"°æ°í!\n"
-"\n"
-"µå·¹ÀÌÅ©X°¡ ÀÌÁ¦ À©µµ¿ìÁî ÆÄƼ¼ÇÀÇ Å©±â¸¦ Á¶Á¤ÇÒ °ÍÀÔ´Ï´Ù. ÀÌ ÀÛµ¿Àº \n"
-"À§ÇèÇÕ´Ï´Ù. ¾ÆÁ÷ ½ÃÀÛÇÏÁö ¾Ê¾Ò´Ù¸é, ¼³Ä¡¸¦ Áß´ÜÇÏ°í À©µµ¿ìÁî¿¡¼­\n"
-"µð½ºÅ©°Ë»ç¡¹(°¡´ÉÇÏ´Ù¸é ¶ÇÇÑ ¡¸µð½ºÅ© Á¶°¢¸ðÀ½¡¹)¸¦ ½ÇÇàÇÑ ÈÄ¿¡,\n"
-"¼³Ä¡¸¦ ´Ù½Ã ½ÃÀÛÇϼ¼¿ä. ¶ÇÇÑ µ¥ÀÌÅ͵µ ¹é¾÷ÇØ µÎ¼¼¿ä.\n"
-"ÁغñµÆÀ¸¸é, ¡¸È®ÀΡ¹À» ´©¸£¼¼¿ä."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "À©µµ¿ìÁî¿ëÀ¸·Î ¾î´À ¿ë·®À» À¯ÁöÇϽðڽÀ´Ï±î?"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "ÆÄƼ¼Ç %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FATÅ©±âÁ¶Á¤ ½ÇÆÐ: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"loopback·Î »ç¿ëÇϰųª Å©±â¸¦ Á¶Á¤ÇÒ FAT ÆÄƼ¼ÇÀÌ ¾ø½À´Ï´Ù. (¶Ç´Â µð½ºÅ© °ø°£"
-"ÀÌ ºÎÁ·ÇÕ´Ï´Ù.)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Àüü µð½ºÅ© »èÁ¦"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "À©µµ¿ìÁî(TM) Á¦°Å"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"ÇÏµå µå¶óÀ̺갡 Çϳª ÀÌ»ó ÀÖ½À´Ï´Ù. ¾î´À °Í¿¡ ¸®´ª½º¸¦ ¼³Ä¡ÇϽðڽÀ´Ï±î?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "%s µå¶óÀÌºê »óÀÇ ¸ðµç ±âÁ¸ ÆÄƼ¼Ç°ú µ¥ÀÌÅÍ°¡ ¼Õ½ÇµÉ °ÍÀÔ´Ï´Ù."
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "»ç¿ëÀÚ Á¤ÀÇ ÆÄƼ¼Ç ³ª´©±â"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "fdisk »ç¿ë"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"ÀÌÁ¦ %sÀÇ ÆÄƼ¼Ç ÀÛ¾÷À» ÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-"¸¶Ä£ ÈÄ, 'w'¸¦ ´­·¯ ÀúÀåÇϴ°ÍÀ» ÀØÁö¸¶¼¼¿ä."
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "À©µµ¿ìÁî ÆÄƼ¼Ç¿¡ ÃæºÐÇÑ °ø°£ÀÌ ¾ø½À´Ï´Ù."
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "¼³Ä¡¿¡ ÇÊ¿äÇÑ °ø°£À» ãÀ» ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "µå·¹ÀÌÅ©X ÆÄƼ¼Ç ¸¶¹ý»ç°¡ ´ÙÀ½ÀÇ ¼Ö·ç¼ÇÀ» ¹ß°ßÇß½À´Ï´Ù:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "ÆÄƼ¼Ç ³ª´©±â ½ÇÆÐ: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "³×Æ®¿÷ È°¼ºÈ­ Áß..."
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "³×Æ®¿÷ ÇØÁ¦ Áß..."
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"¿À·ù°¡ ¹ß»ýÇß½À´Ï´Ù. ±×·¯³ª ÀûÀýÈ÷ ó¸®ÇÒ ¼ö ¾ø½À´Ï´Ù.\n"
-"À§ÇëÀ» °¨¼öÇÒ·Á¸é °è¼ÓÇϼ¼¿ä."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "¸¶¿îÆ® Æ÷ÀÎÆ® Áߺ¹ %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"ÀϺΠÁß¿äÇÑ ÆÑÅ°ÁöµéÀÌ ¿Ã¹Ù¸£°Ô ¼³Ä¡µÇÁö ¾Ê¾Ò½À´Ï´Ù.\n"
-"CDROM µå¶óÀÌºê ¶Ç´Â ¹Ìµð¾î°¡ ¼Õ»óµÇ¾ú½À´Ï´Ù.\n"
-"ÀÌ¹Ì ¼³Ä¡°¡ ¿Ï·áµÈ ÄÄÇ»ÅÍ¿¡¼­ ¡¸rpm -qpl Mandrake/RPMS/*.rpm¡¹¸í·ÉÀ¸·Î Á¡°Ë"
-"ÇØ º¸¼¼¿ä.\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "%s¿¡ ¿À½Å°ÍÀ» ȯ¿µÇÕ´Ï´Ù."
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Ç÷ÎÇÇ µå¶óÀ̺긦 »ç¿ëÇÒ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "%s ´Ü°è·Î ³Ñ¾î°©´Ï´Ù.\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "¼³Ä¡ÇÒ ÆÑÅ°ÁöµéÀÇ ÃÑ ¿ë·® ¼±ÅÃ"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Àüü Å©±â: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "¹öÁ¯: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Å©±â: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "¼³Ä¡ÇÏ°íÀÚ ÇÏ´Â ÆÑÅ°Áö¸¦ ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Á¤º¸"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "¼³Ä¡"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "¼³Ä¡Áß"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Àá½Ã¸¸ ±â´Ù¸®¼¼¿ä, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "³²Àº ½Ã°£ "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Àüü ½Ã°£ "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "¼³Ä¡ ÁغñÁßÀÔ´Ï´Ù"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "%s ÆÑÅ°Áö ¼³Ä¡Áß"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "°è¼Ó ÁøÇàÇմϱî?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "ÆÑÅ°Áö¸¦ Á¤·ÄÇÏ´Â Áß ¿À·ù¹ß»ý:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "ÀÌ¹Ì ÀÖ´Â X11 ¼³Á¤À» »ç¿ëÇϽðڽÀ´Ï±î?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"½Ã½ºÅÛÀÇ ÀÚ¿øÀÌ ºÎÁ·ÇÕ´Ï´Ù. ¸®´ª½º ¸Çµå·¹ÀÌÅ©¸¦ ¼³Ä¡Çϴµ¥ ÀϺΠ¹®Á¦°¡ ¹ß»ý"
-"ÇÒ\n"
-"¼öµµ ÀÖ½À´Ï´Ù. ¸¸¾à ¹®Á¦°¡ ¹ß»ýÇϸé, ÅýºÆ® ¸ðµå·Î ¼³Ä¡¸¦ ½ÃµµÇØ º¸¼¼¿ä.\n"
-"ÅؽºÆ® ¸ðµå·Î ¼³Ä¡ÇÏ·Á¸é, CDROMÀ¸·Î ºÎÆÃÈÄ ¡¸F1¡¹À» ´©¸£°í ¡¸text¡¹¶ó°í ÀÔ·Â"
-"Çϼ¼¿ä."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "¼³Ä¡ À¯Çü"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "´ÙÀ½ ¼³Ä¡ À¯ÇüÁß Çϳª¸¦ ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "¼±ÅÃÇÑ ÆÑÅ°Áö ±×·ìÀÇ Àüü Å©±â°¡ %d MB¿¡ °¡±õ½À´Ï´Ù.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"ÀÌ ¿ë·®º¸´Ù Àû°Ô ¼³Ä¡ÇÏ°í ½Í´Ù¸é,\n"
-"¼³Ä¡ÇÏ°íÀÚ ÇÏ´Â ÆÑÅ°ÁöµéÀÇ ¹éºÐÀ²À» ¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-"¹éºÐÀ²ÀÌ ³·À¸¸é, °¡Àå Áß¿äÇÑ ÆÑÅ°Áöµé¸¸ ¼³Ä¡µË´Ï´Ù;\n"
-"¹éºÐÀ² 100%%´Â ¼±ÅÃµÈ ¸ðµç ÆÑÅ°ÁöµéÀ» ¼³Ä¡ÇÕ´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"¼±ÅÃµÈ ÆÑÅ°ÁöµéÀÇ %d%%¿¡ ÇØ´çÇÏ´Â µð½ºÅ© °ø°£¸¸ ³²¾Æ ÀÖ½À´Ï´Ù.\n"
-"\n"
-"ÀÌ ¿ë·®º¸´Ù Àû°Ô ¼³Ä¡ÇÏ°í ½Í´Ù¸é,\n"
-"¼³Ä¡ÇÏ°íÀÚ ÇÏ´Â ÆÑÅ°ÁöµéÀÇ ¹éºÐÀ²À» ¼±ÅÃÇϼ¼¿ä.\n"
-"¹éºÐÀ²ÀÌ ³·À¸¸é, °¡Àå Áß¿äÇÑ ÆÑÅ°Áöµé¸¸ ¼³Ä¡µË´Ï´Ù;\n"
-"¹éºÐÀ² %d%%´Â °¡´ÉÇÑ ¸ðµç ÆÑÅ°ÁöµéÀ» ¼³Ä¡ÇÕ´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "´ÙÀ½ ´Ü°è¿¡¼­ Ãß°¡·Î ÀÚ¼¼È÷ ¼±ÅÃÇÒ ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "¼³Ä¡ÇÒ ÆÑÅ°ÁöÀÇ ¹éºÐÀ²"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "ÆÑÅ°Áö ±×·ì ¼±ÅÃ"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "°³º° ÆÑÅ°Áö ¼±ÅÃ"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Àüü Å©±â: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "À߸øµÈ ÆÑÅ°Áö"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "À̸§: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Á߿伺: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "µð½ºÅ© °ø°£ÀÌ ºÎÁ·Çϱ⠶§¹®¿¡ ÀÌ ÆÑÅ°Áö¸¦ ¼±ÅÃÇÒ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "´ÙÀ½ ÆÑÅ°ÁöµéÀÌ ¼³Ä¡µÉ °ÍÀÔ´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "´ÙÀ½ ÆÑÅ°ÁöµéÀÌ Á¦°ÅµÉ °ÍÀÔ´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "ÀÌ ÆÑÅ°Áö¸¦ ¼±ÅÃ/¹ö¸² ÇÒ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "ÀÌ°ÍÀº ÇʼöÀûÀÎ ÆÑÅ°ÁöÀÔ´Ï´Ù. ¹Ýµå½Ã ¼±ÅõǾî¾ß ÇÕ´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "ÀÌ ÆÑÅ°Áö¸¦ ¼±ÅÃÇØÁ¦ÇÒ ¼ö ¾ø½À´Ï´Ù. ÀÌ¹Ì ¼³Ä¡ µÇ¾ú½À´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"ÀÌ ÆÑÅ°Áö´Â ¹Ýµå½Ã ¾÷±×·¹À̵åµÇ¾î¾ß ÇÕ´Ï´Ù.\n"
-"Á¤¸»·Î ¼±ÅÃÀ» ÇØÁ¦ÇϽðڽÀ´Ï±î?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "ÀÌ ÆÑÅ°Áö¸¦ ¼±ÅÃÇØÁ¦ÇÒ¼ö ¾ø½À´Ï´Ù. ¹Ýµå½Ã ¾÷±×·¹À̵åµÇ¾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "ÀÚµ¿À¸·Î ¼±ÅÃµÈ ÆÑÅ°Áöµé º¸À̱â"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Ç÷ÎÇÇ¿¡ ÀúÀå/ÀûÀç"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "¼±ÅÃµÈ ÆÑÅ°Áö ¸ñ·Ï ¾÷µ¥ÀÌÆ® Áß"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "ÃÖ¼Ò ¼³Ä¡"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "°è»ê Áß"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "¼³Ä¡ ÁغñÁßÀÔ´Ï´Ù. Àá½Ã ±â´Ù¸®¼¼¿ä."
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d ÆÑÅ°Áö"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "µ¿ÀÇ"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "°ÅºÎ"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"CDROMÀ» ¹Ù²ã ÁÖ¼¼¿ä!\n"
-"\n"
-"¡¸%s¡¹¶ó°í ¾²¿©Áø CDROMÀ» µå¶óÀ̺꿡 ³ÖÀº ÈÄ, ¡¸È®ÀΡ¹À» ´­·¯ ÁÖ¼¼¿ä.\n"
-"¸¸¾à CDROMÀ» °¡Áö°í ÀÖÁö ¾Ê´Ù¸é, ¡¸Ãë¼Ò¡¹¸¦ ´­·¯ Ãß°¡ ¼³Ä¡¸¦ Ãë¼ÒÇϼ¼¿ä."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "´ÙÀ½ ÆÑÅ°Áö¸¦ ¼³Ä¡Áß ¿À·ù°¡ ¹ß»ýÇß½À´Ï´Ù: "
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "¿À·ù ¹ß»ý"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "»ç¿ë µ¿ÀǼ­"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Å°º¸µå"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Å°º¸µå ·¹À̾ƿô ¼±ÅÃ"
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Áö¿øµÇ´Â Å°º¸µå ¸ñ·ÏÀÌ ¿©±â¿¡ ÀÖ½À´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "¼³Ä¡ À¯ÇüÀ» ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "¼³Ä¡/¾÷µ¥ÀÌÆ®"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "¼³Ä¡ÇÕ´Ï±î ¾Æ´Ï¸é ¾÷µ¥ÀÌÆ® Çմϱî?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "±ÇÀå"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Àü¹®°¡"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "¾÷µ¥ÀÌÆ®"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "¾î¶² Á¾·ùÀÇ ¸¶¿ì½º¸¦ »ç¿ëÇϽʴϱî?"
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "¸¶¿ì½º Æ÷Æ®"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "¾î¶² ½Ã¸®¾ó Æ÷Æ®¿¡ ¸¶¿ì½º°¡ ¿¬°áµÇ¾î ÀÖ³ª¿ä?"
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "¹öÆ° ¿¡¹Ä·¹À̼Ç"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "¹öÆ° 2 ¿¡¹Ä·¹À̼Ç"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "¹öÆ° 3 ¿¡¹Ä·¹À̼Ç"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIS Ä«µå ȯ°æ¼³Á¤Áß..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "IDE ¼³Á¤Áß"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "»ç¿ë°¡´ÉÇÑ ÆÄƼ¼ÇÀÌ ¾ø½À´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "¸¶¿îÆ® À§Ä¡¸¦ ã±âÀ§ÇØ ÆÄƼ¼ÇµéÀ» °Ë»ö Áß"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "¸¶¿îÆ® À§Ä¡¸¦ ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"ÇÏµå µð½ºÅ©ÀÇ ÆÄƼ¼Ç Å×À̺íÀ» ÀÐÀ»¼ö ¾ø½À´Ï´Ù. ³Ê¹« ¼Õ»óµÇ¾î ÀÖ½À´Ï´Ù:(\n"
-"¹®Á¦ÀÖ´Â ÆÄƼ¼ÇÀ» ºñ¿ì±âÀ§ÇÑ ½Ãµµ¸¦ ÇÒ ¼ö ÀÖ½À´Ï´Ù.(¸ðµç µ¥ÀÌÅÍ°¡ ¼Õ½ÇµË´Ï"
-"´Ù!)\n"
-"´Ù¸¥ ÇØ°áÃ¥Àº DrakX°¡ ÆÄƼ¼Ç Å×À̺íÀ» º¯°æÇÏÁö ¸øÇÏ°Ô ÇÏ´Â °ÍÀÔ´Ï´Ù.\n"
-"(¿À·ù´Â %s ÀÔ´Ï´Ù.)\n"
-"\n"
-"ÆÄƼ¼ÇµéÀ» ÀҾ ÁÁ½À´Ï±î?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"µð½ºÅ©µå·¹Å©°¡ ÆÄƼ¼Ç Å×À̺íÀ» Á¤È®È÷ Àоî¿À´Âµ¥ ½ÇÆÐÇß½À´Ï´Ù.\n"
-"À§ÇèÀ» °¨¼öÇÒ Áغñ°¡ µÈ °æ¿ì¿¡¸¸ °è¼ÓÇϼ¼¿ä!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"1MB ºÎÆ®½ºÆ®·¦ °ø°£ ºÎÁ·! ¼³Ä¡´Â °è¼ÓÇÒ ¼ö ÀÖÁö¸¸, ½Ã½ºÅÛÀ» ºÎÆÃÇϱâ À§Çؼ­"
-"´Â µð½ºÅ©µå·¹ÀÌÅ©¿¡¼­ ºÎÆ®½ºÆ®·¦ ÆÄƼ¼ÇÀ» ¸¸µé¾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "¾÷±×·¹À̵åÇÒ ·çÆ® ÆÄƼ¼ÇÀ» ãÀ» ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "·çÆ® ÆÄƼ¼Ç"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "½Ã½ºÅÛ¿¡¼­ ·çÆ® ÆÄƼ¼Ç(/)Àº ¾î¶²°ÍÀԴϱî?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "ÆÄƼ¼Ç Å×ÀÌºí º¯°æ»çÇ×À» Àû¿ëÇÏ·Á¸é ¸®ºÎÆÃÀ» ÇØ¾ß ÇÕ´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Æ÷¸ËÇÒ ÆÄƼ¼ÇÀ» ¼±ÅÃÇϼ¼¿ä"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "¹èµå ºí·° °Ë»ç¸¦ Çմϱî?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "ÆÄƼ¼Ç Æ÷¸Ë"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s ÆÄÀϸ¦ »ý¼ºÇÏ°í Æ÷¸Ë"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "½º¿Ò ¸Þ¸ð¸®°¡ ºÎÁ·ÇÕ´Ï´Ù. Á» ´õ Ãß°¡Çϼ¼¿ä."
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "À¯È¿ÇÑ ÆÑÅ°Áö¸¦ ã°í ÀÖ½À´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "¾÷±×·¹À̵åÇÒ ÆÑÅ°Áö¸¦ °Ë»öÁßÀÔ´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "¼³Ä¡ ¶Ç´Â ¾÷±×·¹À̵带 À§ÇÑ µð½ºÅ© °ø°£ÀÌ ºÎÁ·ÇÕ´Ï´Ù. (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Àüü (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "ÃÖ¼Ò (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "±ÇÀå (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "»ç¿ëÀÚ Á¤ÀÇ"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Ç÷ÎÇÇ¿¡ ÆÑÅ°Áö ¼±Åøñ·ÏÀ» ÀûÀç ¶Ç´Â ÀúÀåÇÒÁö¸¦ ¼±ÅÃÇϼ¼¿ä.\n"
-"Çü½Ä(Æ÷¸Ë)Àº ÀÚµ¿¼³Ä¡ »ý¼º Ç÷ÎÇÇ¿Í µ¿ÀÏÇÕ´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Ç÷ÎÇÇ¿¡¼­ Àбâ"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Ç÷ÎÇÇ¿¡¼­ Àд Áß"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "ÆÑÅ°Áö ¼±ÅÃ"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "ÆÑÅ°Áö ¼±Åøñ·Ï Ç÷ÎÇÇ µð½ºÅ©¸¦ ³ÖÀ¸¼¼¿ä."
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Ç÷ÎÇÇ¿¡ ÀúÀå"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "¼±ÅÃµÈ ¿ë·®ÀÌ »ç¿ëÇÒ ¼ö ÀÖ´Â °ø°£º¸´Ù Å®´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"¸¸¾à ¾Æ·¡¿¡ ¿­°ÅµÈ ¸ðµç CD¸¦ °¡Áö°í ÀÖ´Ù¸é, ¡¸È®ÀΡ¹À», \n"
-"ÀüÇô °¡Áö°í ÀÖÁö ¾Ê´Ù¸é, ¡¸Ãë¼Ò¡¹¸¦, \n"
-"ÀϺθ¸ °¡Áö°í ÀÖ´Ù¸é, ¾ø´Â CD¸¦ ¼±ÅÃÇØÁ¦ÇÑ ÈÄ¿¡ ¡¸È®ÀΡ¹À» ´©¸£¼¼¿ä."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "¡¸%s¡¹¶ó°í Ç¥½ÃµÈ CDROM"
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-" %s ÆÑÅ°Áö ¼³Ä¡ Áß... \n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "¼³Ä¡Àü ȯ°æ¼³Á¤"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "ºÎÆà Ç÷ÎÇǸ¦ %s µå¶óÀ̺꿡 ³ÖÀ¸¼¼¿ä"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "¾÷µ¥ÀÌÆ® ¸ðµâ Ç÷ÎÇǸ¦ %s µå¶óÀ̺꿡 ³ÖÀ¸¼¼¿ä"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "ÆÑÅ°Áö¸¦ ¹ÞÀ» ¹Ì·¯ »çÀÌÆ®¸¦ ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "»ç¿ë°¡´ÉÇÑ ÆÑÅ°ÁöÀÇ ¸®½ºÆ®¸¦ ¹Ì·¯ »çÀÌÆ®¿¡ Á¢¼ÓÇؼ­ ¹Þ½À´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "¼³Ä¡ÇÒ ÆÑÅ°Áö ¼±ÅÃ"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "´ÔÀÇ ½Ã°£´ë´Â ¾îµðÀԴϱî?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "Çϵå¿þ¾î ½Ã°è GMT ¼³Á¤"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "ÀÚµ¿ ½Ã°£ µ¿±âÈ­ (NTP »ç¿ë)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "NTP ¼­¹ö"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "¿ø°Ý CUPS ¼­¹ö"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "ÇÁ¸°ÅÍ ¾øÀ½"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "¿ä¾à¼³¸í"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "¸¶¿ì½º"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "½Ã°£´ë"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "ÇÁ¸°ÅÍ"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDN Ä«µå"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "»ç¿îµå Ä«µå"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV Ä«µå"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Áö¿ª ÆÄÀϵé"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "root ¾ÏÈ£ ¼³Á¤"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "¾ÏÈ£ ¾øÀ½"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "ÀÌ ¾ÏÈ£´Â ³Ê¹« ´Ü¼øÇÕ´Ï´Ù.( Àû¾îµµ %d ±ÛÀÚ´Â ³Ñ¾î¾ß ÇÕ´Ï´Ù)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "»ç¿ëÀÚ ÀÎÁõ"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "ÀÎÁõ LDAP"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP ±â¹Ý DN"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "LDAP ¼­¹ö"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "ÀÎÁõ NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS µµ¸ÞÀÎ"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS ¼­¹ö"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "ù¹ø° Ç÷ÎÇÇ µå¶óÀ̺ê"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "µÎ¹ø° Ç÷ÎÇÇ µå¶óÀ̺ê"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "°Ç³Ê¶Ù±â"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"ºÎÆ® µð½ºÅ©´Â ÀϹÝÀûÀÎ ºÎÆ®·Î´õ¸¦ »ç¿ëÇÏÁö ¾Ê°í, ¸®´ª½º ½Ã½ºÅÛÀ¸·Î ºÎÆÃÇÏ´Â\n"
-"¹æ¹ýÀ» Á¦°øÇÕ´Ï´Ù. ¸¸¾à LILO(¶Ç´Â Grub)¸¦ »ç¿ëÇÏÁö ¾Ê°Å³ª, ´Ù¸¥ ¿î¿µÃ¼Á¦°¡\n"
-"LILO¸¦ Á¦°ÅÇϰųª ¶Ç´Â LILO°¡ Çϵå¿þ¾î ¼³Á¤°ú ¸ÂÁö ¾ÊÀ» ¶§, À¯¿ëÇÕ´Ï´Ù.\n"
-"ºÎÆ® µð½ºÅ©´Â ¶ÇÇÑ ¸Çµå·¹ÀÌÅ© º¹±¸ À̹ÌÁö¿Í ÇÔ²² »ç¿ëµÇ¾î ½É°¢ÇÑ\n"
-"½Ã½ºÅÛ ¹®Á¦¸¦ ½±°Ô º¹±¸ÇÒ ¼ö ÀÖ½À´Ï´Ù. ´ÔÀÇ ½Ã½ºÅÛÀ» À§ÇÑ ºÎÆ® µð½ºÅ©¸¦\n"
-"¸¸µå½Ã°Ú½À´Ï±î?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Á˼ÛÇÕ´Ï´Ù. »ç¿ë°¡´ÉÇÑ Ç÷ÎÇÇ µå¶óÀ̺갡 ¾ø½À´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "ºÎÆ® µð½ºÅ©¸¦ ¸¸µé¶§ »ç¿ëÇÒ Ç÷ÎÇÇ µå¶óÀ̺긦 ¼±ÅÃÇØ ÁÖ¼¼¿ä"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Ç÷ÎÇÇ µð½ºÅ©¸¦ %s µå¶óÀ̺꿡 ³ÖÀ¸¼¼¿ä"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "ºÎÆ® µð½ºÅ© »ý¼ºÁß"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "ºÎÆ® ·Î´õ ÁغñÁß"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "aboot¸¦ »ç¿ëÇϽðڽÀ´Ï±î?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"aboot ¼³Ä¡ ½ÇÆÐ. \n"
-"ù¹ø° ÆÄƼ¼ÇÀ» ÈѼÕÇÒÁö¶óµµ °­Á¦ ¼³Ä¡ÇÒ±î¿ä?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-msgid "Installing bootloader"
-msgstr "ºÎÆ®·Î´õ ¼³Ä¡ Áß"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "ºÎÆ®·Î´õ ¼³Ä¡°¡ ½ÇÆÐÇß½À´Ï´Ù. ´ÙÀ½°ú °°Àº ¿À·ù°¡ ¹ß»ýÇß½À´Ï´Ù:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"ºÎÆ®·Î´õ°¡ Á¦´ë·Î ÀÛµ¿Çϱâ À§Çؼ­´Â °ø°³ Æß¿þ¾î ºÎÆ® ÀåÄ¡¸¦ º¯°æÇÒ Çʿ伺ÀÌ\n"
-"ÀÖÀ» ¼öµµ ÀÖ½À´Ï´Ù. ¸¸¾à ÀçºÎÆÃÈÄ¿¡ ºÎÆ®·Î´õ ÇÁ·ÒÇÁÆ®°¡ ³ªÅ¸³ªÁö ¾Ê´Â´Ù¸é,\n"
-"ÀçºÎÆýÿ¡ ¸í·É-¿É¼Ç-O-F¸¦ °è¼Ó ´©¸£°í ÀÖ´Ù°¡ ´ÙÀ½°ú °°ÀÌ ÀÔ·ÂÇϼ¼¿ä:\n"
-"setenv boot-device %s,\\\\:tbxi\n"
-"shut-down\n"
-"±×·¯°í³ª¸é ´ÙÀ½ºÎÅÍ´Â ºÎÆ®·Î´õ ÇÁ·ÒÇÁÆ®¸¦ º¼ ¼ö ÀÖÀ» °ÍÀÔ´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "³·À½"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "º¸Åë"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "³ôÀ½"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "º¸¾È ´Ü°è¸¦ ¼±ÅÃÇØ ÁÖ¼¼¿ä"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "%s µå¶óÀ̺꿡 ºó Ç÷ÎÇÇ µð½ºÅ©¸¦ ³ÖÀ¸¼¼¿ä"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "ÀÚµ¿ ¼³Ä¡ Ç÷ÎÇÇ µð½ºÅ© »ý¼º Áß"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"¸î¸î ´Ü°è°¡ ¿ÏÀüÈ÷ ³¡³ªÁö ¾Ê¾Ò½À´Ï´Ù.\n"
-"\n"
-"Á¤¸» Áö±Ý Á¾·á ÇϽðڽÀ´Ï±î?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"ÃàÇÏÇÕ´Ï´Ù. ¼³Ä¡°¡ ¼º°øÀûÀ¸·Î ³¡³µ½À´Ï´Ù.\n"
-"ºÎÆ® ¹Ìµð¾î¸¦ Á¦°ÅÇÏ°í ¸®ÅÏÀ» ´­·¯¼­ ¸®ºÎÆà Çϼ¼¿ä.\n"
-"\n"
-"ÀÌ ¹öÀüÀÇ ¸Çµå·¹ÀÌÅ© ¸®´ª½ºÀÇ ¹ö±×¼öÁ¤ Á¤º¸´Â http://www.mandrakelinux.com\n"
-"¿¡¼­ ¾òÀ¸½Ç ¼ö ÀÖ½À´Ï´Ù.\n"
-"¼³Ä¡ÈÄ ½Ã½ºÅÛ ¼³Á¤¿¡ ´ëÇÑ Á¤º¸´Â °ø½Ä ¸Çµå·¹ÀÌÅ© ¸®´ª½º À¯Àú °¡À̵带\n"
-"Âü°íÇϽñ⠹ٶø´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "ÀÚµ¿ ¼³Ä¡ Ç÷ÎÇÇ µð½ºÅ© »ý¼º"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"ÀÚµ¿ ¼³Ä¡´Â ¿øÇÑ´Ù¸é ¿Ïº®ÇÑ ÀÚµ¿È­°¡ °¡´ÉÇÕ´Ï´Ù.\n"
-"ÀÌ·² °æ¿ì, ÇÏµå µå¶óÀ̺긦 Á¡À¯ÇØ ¹ö¸³´Ï´Ù!\n"
-"(ÀÌ°ÍÀº ¶Ç ´Ù¸¥ ÄÄÇ»ÅÍ¿¡ µ¿ÀÏÇÏ°Ô ¼³Ä¡ÇÒ ¶§¸¦ À§ÇÑ °ÍÀÔ´Ï´Ù.)\n"
-"\n"
-"ÀϹÝÀûÀ¸·Î Á÷Á¢ ¼³Ä¡ÇÏ´Â °ÍÀÌ ÁÁ½À´Ï´Ù.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "ÀÚµ¿"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Àç½Ãµµ"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "¼±ÅÃµÈ ÆÑÅ°Áö ¸ñ·Ï ÀúÀå"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "¸®´ª½º-¸Çµå·¹ÀÌÅ© ¼³Ä¡ %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> Ç׸ñ°£ À̵¿        |  <Space> ¼±Åà      |  <F12> ´ÙÀ½ È­¸é"
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu°¡ ¾øÀ½"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "ÆÄÀÏ ¼±ÅÃ"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "°í±Þ"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "±â´Ù·Á ÁÖ¼¼¿ä"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Æ®¸® È®Àå"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Æ®¸® Á¢±â"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "±×·ìº°/ÆÑÅ°Áöº° Á¤·Ä Àüȯ"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "¾Ö¸ÅÇÑ Ç¥Çö(%s), º¸´Ù ÀÚ¼¼È÷ ±âÀÔÇØ ÁÖ¼¼¿ä.\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "À߸øµÈ ¼±ÅÃÀÔ´Ï´Ù, ´Ù½Ã Çϼ¼¿ä\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (±âº»°ª %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "´ÔÀÇ ¼±ÅÃÀº? (±âº»°ª %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "´ÔÀÇ ¼±ÅÃÀº? (±âº»°ªÀº %s, ¾ø´Ù¸é¡¸none¡¹ÀÔ·Â) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "üÄÚ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "µ¶ÀÏ"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "µåº¸¶ô"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "½ºÆäÀÎ"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Çɶõµå"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "ÇÁ¶û½º"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "³ë¸£¿þÀÌ"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Æú¶õµå"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "·¯½Ã¾Æ"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "½º¿þµ§"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "¿µ±¹"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "¹Ì±¹"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "¾Ë¹Ù´Ï¾Æ"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "¹Ì±¹ (±¸¹öÀü)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "¹Ì±¹ (ŸÀÚ±â)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "¹Ì±¹ (À½¼ºÇÐ)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (¶óƾ)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "º§±â¿¡"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "ºÒ°¡¸®¾Æ"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "ºê¶óÁú (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "º§¶ó·ç½Ã¾Æ"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "½ºÀ§½º (µ¶¾î)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "½ºÀ§½º (ºÒ¾î)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "üÄÚ (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "µ¶ÀÏ (dead Å° ¾øÀ½)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "µ§¸¶Å©"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "µåº¸¶ô(US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "µåº¸¶ô(³ë¸£¿þÀÌ)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "¿¡½ºÅä´Ï¾Æ"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "±×·çÁö¾Æ(·¯½Ã¾Æ¾î)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "±×·çÁö¾Æ (¶óƾ)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "±×¸®½º"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Çë°¡¸®"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Å©·Î¾ÆƼ¾Æ"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "À̽º¶ó¿¤"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "À̽º¶ó¿¤ (À½¼ºÇÐ)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "À̶õ"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "¾ÆÀ̽½·£µå"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "ÀÌÅ»¸®¾Æ"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "ÀϺ» 106Å°"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "ÇÑ±Û Å°º¸µå"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "¶óƾ ¾Æ¸Þ¸®Ä«"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "¸®Åõ¾Æ´Ï¾Æ AZERTY (±¸Çü)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "¸®Åõ¾Æ´Ï¾Æ AZERTY (½ÅÇü)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "¸®Åõ¾Æ´Ï¾Æ (¼ýÀÚ¿­ QWERTY)"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "¸®Åõ¾Æ´Ï¾Æ (À½¼ºÇÐ QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "Latvian"
-msgstr "¶óÆ®¹Ù¾Æ"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "¸¶Äɵµ´Ï¾Æ"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "³×µ¨¶õµå"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Æú¶õµå (QwertY)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Æú¶õµå (QwertZ)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Æ÷·çÅõÄ®"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "ij³ª´Ù (Äùº¤)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "·Î¸¸ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "·Î¸¸ (QWERTY)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "·¯½Ã¾Æ (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "½½·Îº£´Ï¾Æ"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "½½·Î¹ÙÅ°¾Æ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "½½·Î¹ÙÅ°¾Æ (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "¼¼¸£ºñ¾Æ (½Ã¸±)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "ű¹"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr "ŸÁöÅ© Å°º¸µå"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Åͱâ (ÀüÅë ¡¸F¡¹¸ðµ¨"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "ÅÍÅ° (Çö´ë ¡¸Q¡¹¸ðµ¨"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "¿ìÅ©¶óÀ̳ª"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "US Å°º¸µå (±¹Á¦)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "º£Æ®³² (¼ýÀÚ¿­ QWERTY)"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "À¯°í½½¶óºñ¾Æ (¶óƾ)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "¼øȯ ¸¶¿îÆ® %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "³í¸® º¼·ýÀ» ¸ÕÀú Á¦°ÅÇØ ÁÖ¼¼¿ä.\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - ¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Ç¥ÁØ"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "·ÎÁöÅØ ¸¶¿ì½º¸Ç/ÆÛ½ºÆ®¸¶¿ì½º (½Ã¸®¾ó)"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "ÀϹÝÀûÀÎ PS2 ÈÙ ¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "ALPS ±Û¶óÀ̵åÆ÷ÀÎÆ®"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Ä˽ÌÅÏ ¾ÅÅ· ¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Áö´Ï¾î½º ³Ý¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Áö´Ï¾î½º ³Ý½ºÅ©·Ñ"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 ¹öÆ°"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "ÀÏ¹Ý ¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "ÈÙ ¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "½Ã¸®¾ó ¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "ÀϹÝÀûÀÎ 2¹öÆ° ¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "ÀϹÝÀûÀÎ 3¹öÆ° ¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "¸¶ÀÌÅ©·Î¼ÒÇÁÆ® ÀÎÅÚ¸®¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "·ÎÁöÅØ ¸¶¿ì½º¸Ç"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "¸¶¿ì½º ½Ã½ºÅÛ"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "·ÎÁöÅØ CC ½Ã¸®Áî"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "·ÎÁöÅØ ¸¶¿ì½º¸Ç+/ÆÛ½ºÆ®¸¶¿ì½º+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM ½Ã¸®Áî"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM È÷ƮŸºí·¿"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "·ÎÁöÅØ ¸¶¿ì½º (½Ã¸®¾ó, ¿À·¡µÈ C7 ÇüÅÂ)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "¹ö½º¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 ¹öÆ°"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 ¹öÆ°"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "¾øÀ½"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "¸¶¿ì½º ¾øÀ½"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "¸¶¿ì½º¸¦ Å×½ºÆ®Çϼ¼¿ä."
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "¸¶¿ì½º¸¦ È°¼ºÈ­ÇÏ·Á¸é"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "¸¶¿ì½ºÈÙÀ» ¿òÁ÷¿© º¸¼¼¿ä."
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-"-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,-*-gulim-bold-r-"
-"normal--16-*-*-*-c-*-ksc5601.1987-0,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Á¾·á"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "´ÙÀ½ ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- ÀÌÀü"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "ÀÌ°ÍÀÌ ¸Â½À´Ï±î?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "ÀÎÅͳݿ¡ ¿¬°á"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"ADSL ¿¬°áÀº ´ë°³ PPPOE¸¦ »ç¿ëÇÕ´Ï´Ù. \n"
-"ÇÏÁö¸¸, ¾î¶² °æ¿ì¿¡´Â PPTP³ª, ±ØÈ÷ µå¹°°Ô´Â DHCPµµ »ç¿ëµË´Ï´Ù.\n"
-"Àß ¸ð¸£°Ú´Ù¸é, ¡¸PPPOE »ç¿ë¡¹À» ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "¾ËÄ«ÅÚ ½ºÇǵåÅÍÄ¡ USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "DHCP »ç¿ë"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "PPPOE »ç¿ë"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "PPTP »ç¿ë"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"¾î¶² dhcp Ŭ¶óÀ̾ðÆ®¸¦ »ç¿ëÇÏ°Ú½À´Ï±î?\n"
-"dhcpcd°¡ ±âº»°ªÀÔ´Ï´Ù."
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"¾î¶°ÇÑ ³×Æ®¿÷ ¾î´ðÅ͵µ °¨ÁöµÇÁö ¾Ê¾Ò½À´Ï´Ù.\n"
-"¿¬°á ¼³Á¤À» ÇÒ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "³×Æ®¿÷ ÀÎÅÍÆäÀ̽º¸¦ ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "¾î¶² ¾î´ðÅÍ·Î ÀÎÅͳݿ¡ ¿¬°áÇÒ °ÍÀÎÁö ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "³×Æ®¿÷ Ä«µå¸¦ ãÀ»¼ö ¾ø½À´Ï´Ù"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "³×Æ®¿÷ ¼³Á¤"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"È£½ºÆ®¸íÀ» ¾Ë°í ÀÖ´Ù¸é ÀÔ·ÂÇϼ¼¿ä.\n"
-"ÀϺΠDHCP ¼­¹ö´Â È£½ºÆ®¸íÀ» ¿ä±¸ÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-"È£½ºÆ®¸íÀº ¿Ïº®ÇÑ Á¤±ÔÇüÀ̾î¾ß ÇÕ´Ï´Ù.\n"
-"¿¹)¡¸mybox.mylab.myco.com¡¹"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "È£½ºÆ®¸í:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "³×Æ®¿÷ ¼³Á¤ ¸¶¹ý»ç"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "¿ÜÀå ISDN ¸ðµ©"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "³»Àå ISDN Ä«µå"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "¾î¶² Á¾·ùÀÇ ISDN ¿¬°áÀ» »ç¿ëÇմϱî?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"¾î¶² ISDN ¼³Á¤ ¹æ½ÄÀ» ¼±È£ÇϽʴϱî?\n"
-"\n"
-"* ±âÁ¸ÀÇ ¼³Á¤Àº ISDN4NETÀ» »ç¿ëÇÕ´Ï´Ù. °­·ÂÇÏÁö¸¸ Ãʺ¸ÀÚ¿¡°Õ\n"
-"  ¾î·Æ°í ¶ÇÇÑ Ç¥ÁØÀÌ ¾Æ´Õ´Ï´Ù.\n"
-"\n"
-"* »õ·Î¿î ¼³Á¤Àº ½±°í º¸´Ù Ç¥ÁØÀûÀÌÁö¸¸, °­·ÂÇÑ µµ±¸´Â µð¼Ò\n"
-"  ºÎÁ·ÇÕ´Ï´Ù.\n"
-"\n"
-"¡¸ISDN-LIGHT¡¹¸¦ ÃßõÇÕ´Ï´Ù.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "»õ·Î¿î ¼³Á¤ (ISDN-LIGHT)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "±âÁ¸ÀÇ ¼³Á¤ (ISDN4NET)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN ¼³Á¤"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"°ø±ÞÀÚ¸¦ ¼±ÅÃÇϼ¼¿ä.\n"
-"¸ñ·Ï¿¡ ¾øÀ¸¸é, ¡¸¸ñ·Ï¿¡ ¾øÀ½¡¹À» ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "À¯·´ ÇÁ·ÎÅäÄÝ"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "À¯·´ ÇÁ·ÎÅäÄÝ (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "´Ù¸¥ Áö¿ªÀ» À§ÇÑ ÇÁ·ÎÅäÄÝ"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"´Ù¸¥ Áö¿ªÀ» À§ÇÑ ÇÁ·ÎÅäÄÝ\n"
-" Dä³Î (leased lines) ¾Æ´Ô"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "¾î¶² ÇÁ·ÎÅäÄÝÀ» »ç¿ëÇϽðڽÀ´Ï±î?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "¾î¶² Á¾À¯ÀÇ Ä«µå¸¦ °¡Áö°í ÀÖ½À´Ï±î?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "¸ð¸£°ÚÀ½"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"¸¸¾à ISA Ä«µå¸¦ °¡Áö°í ÀÖ´Ù¸é, ´ÙÀ½ È­¸é¿¡¼­ ¼³Á¤°ªÀÌ Á¤È®ÇØ¾ß ÇÕ´Ï´Ù.\n"
-"\n"
-"¸¸¾à PCMCIA Ä«µå¸¦ °¡Áö°í ÀÖ´Ù¸é, IRQ¿Í IO °ªÀ» ¾Ë°í ÀÖ¾î¾ß ÇÕ´Ï´Ù.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "ÁßÁö"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "°è¼Ó"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "¾î´À °ÍÀÌ ´ÔÀÇ ISDN Ä«µåÀԴϱî?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"ISDN PCI Ä«µå°¡ °¨ÁöµÇ¾úÁö¸¸, ±× À¯ÇüÀ» ¾Ë ¼ö ¾ø½À´Ï´Ù. ´ÙÀ½ È­¸é¿¡¼­ PCI Ä«"
-"µå¸¦ ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "ISDN PCI Ä«µå °Ë»ö ½ÇÆÐ. ´ÙÀ½ È­¸é¿¡¼­ Á÷Á¢ ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "¾î¶² ½Ã¸®¾ó Æ÷Æ®¿¡ ¸¶¿ì½º°¡ ¿¬°áµÇ¾î ÀÖ³ª¿ä?"
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "´ÙÀ̾ó¾÷ ¿É¼Ç"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "¿¬°á À̸§"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "ÀüÈ­ ¹øÈ£"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "·Î±×ÀÎ ID"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "½ºÅ©¸³Æ® ±â¹Ý"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Å͹̳¯ ±â¹Ý"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "µµ¸ÞÀÎ À̸§"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "ù¹ø° DNS ¼­¹ö (¿É¼Ç)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "µÎ¹ø° DNS ¼­¹ö (¿É¼Ç)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"¿¬°áÀ» ÇØÁ¦Çϰųª ´Ù½Ã ¼³Á¤ÇÒ ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"¿¬°áÀ» ´Ù½Ã ¼³Á¤ÇÒ ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "ÇöÀç ÀÎÅͳݿ¡ ¿¬°áµÇ¾î ÀÖ½À´Ï´Ù."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"ÀÎÅͳݿ¡ ¿¬°áÇϰųª ¿¬°áÀ» Àç¼³Á¤ÇÒ ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "ÇöÀç ÀÎÅͳݿ¡ ¿¬°áµÇ¾î ÀÖÁö ¾Ê½À´Ï´Ù."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "ÀÎÅͳݿ¡ ¿¬°á"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "ÀÎÅÍ³Ý ¿¬°á ²÷±â"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "³×Æ®¿÷ ¿¬°á ¼³Á¤ (LAN ¶Ç´Â ÀÎÅͳÝ)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "ÀÎÅÍ³Ý ¿¬°á & ¼³Á¤"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "ÀÌÁ¦ ¡¸%s¡¹¿¬°áÀ» ¼³Á¤ÇÒ °ÍÀÔ´Ï´Ù."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"ÀÌÁ¦ ¡¸%s¡¹¿¬°áÀ» ¼³Á¤ÇÒ °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"\n"
-"½ÃÀÛÇÏ·Á¸é ¡¸È®ÀΡ¹À» ´©¸£¼¼¿ä."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "³×Æ®¿÷ ȯ°æ ¼³Á¤"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Áö±Ý ³×Æ®¿÷À» »ç¿ëÇÏ¿© ¼³Ä¡ÇÏ°í ÀÖ´Â ÁßÀ̹ǷÎ, ³×Æ®¿÷ ¼³Á¤Àº ÀÌ¹Ì µÇ¾î ÀÖ½À´Ï"
-"´Ù.\n"
-"¡¸È®ÀΡ¹À» ´­·¯ ÇöÀç ¼³Á¤À» À¯ÁöÇϰųª, ¡¸Ãë¼Ò¡¹¸¦ ´­·¯ ÀÎÅͳÝ/³×Æ®¿÷ ¿¬°áÀ» "
-"´Ù½Ã ¼³Á¤Çϼ¼¿ä.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"³×Æ®¿÷ ¼³Á¤ ¸¶¹ý»ç¿¡ Àß ¿À¼Ì½À´Ï´Ù.\n"
-"\n"
-"Áö±Ý ÀÎÅͳÝ/³×Æ®¿÷ ¿¬°áÀ» ¼³Á¤ÇÏ·Á ÇÕ´Ï´Ù.\n"
-"ÀÚµ¿ °Ë»öÀ» »ç¿ëÇÏ°í ½ÍÁö ¾Ê´Ù¸é, üũ¹Ú½º¸¦ ÇØÁ¦Çϼ¼¿ä.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "¼³Á¤ÇÒ ÇÁ·ÎÆÄÀÏÀ» ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "ÀÚµ¿°Ë»ö »ç¿ë"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "ÀåÄ¡¸¦ °Ë»öÇÏ°í ÀÖ½À´Ï´Ù..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "ÀÏ¹Ý ¸ðµ© ¿¬°á"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "%s Æ÷Æ®¿¡¼­ ¹ß°ß"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN ¿¬°á"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "%s ¹ß°ß"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ADSL ¿¬°á"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "ÀÎÅÍÆäÀ̽º %s»ó¿¡¼­ ¹ß°ß"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "ijÀÌºí ¿¬°á"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "ijÀÌºí ¿¬°á ¹ß°ß"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "LAN ¿¬°á"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "ÀÌ´õ³Ý Ä«µå ¹ß°ß"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "¼³Á¤ÇÒ ¿¬°áÀ» ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"ÀÎÅÍ³Ý Á¢¼Ó¹æ½ÄÀ» ¿©·¯°³ ¼³Á¤Çß½À´Ï´Ù.\n"
-"¿¬°á¿¡ »ç¿ëÇÒ ¹æ½ÄÀ» ¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "ÀÎÅÍ³Ý ¿¬°á"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "ºÎÆýÿ¡ ¿¬°áÇϵµ·Ï ÇÏ°Ú½À´Ï±î?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "³×Æ®¿÷ ¼³Á¤"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr "³×Æ®¿÷À» ´Ù½Ã ½ÃÀÛÇØ¾ß ÇÕ´Ï´Ù."
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"³×Æ®¿÷À» ´Ù½Ã ½ÃÀÛÇÏ´Â µµÁß¿¡ ¹®Á¦°¡ ¹ß»ýÇß½À´Ï´Ù:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"ÃàÇÏÇÕ´Ï´Ù. ³×Æ®¿÷/ÀÎÅÍ³Ý ¼³Á¤ÀÌ ¿Ï·áµÇ¾ú½À´Ï´Ù.\n"
-"\n"
-"ÀÌÁ¦ ¼³Á¤ÀÌ ½Ã½ºÅÛ¿¡ Àû¿ëµÉ °ÍÀÔ´Ï´Ù.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"¿Ï·áµÈ ÈÄ¿¡, X¸¦ ´Ù½Ã ½ÃÀÛÇÏ¿© È£½ºÆ®¸í º¯°æ¿¡ µû¸¥\n"
-"¹®Á¦ ¹ß»ýÀ» ÇÇÇϽñ⠹ٶø´Ï´Ù."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"°æ°í: ÀÌ ÀåÄ¡´Â ÀÌ¹Ì ÀÎÅÍ³Ý ¿¬°á¿ëÀ¸·Î ¼³Á¤µÇ¾î ÀÖ½À´Ï´Ù.\n"
-"±×³É ÇöÀç ¼³Á¤À» À¯ÁöÇϼ¼¿ä.\n"
-"¾Æ·¡ ÀԷ¶õÀ» º¯°æÇϸé ÇöÀç ¼³Á¤À» µ¤¾î¾²°Ô µË´Ï´Ù."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"ÀÌ ½Ã½ºÅÛÀ» À§ÇÑ IP ¼³Á¤À» ÀÔ·ÂÇØ ÁÖ¼¼¿ä.\n"
-"°¢°¢ÀÇ Ç׸ñÀº¡¸.¡¹À¸·Î ±¸ºÐµÈ ½ÊÁø¼ö IP ÁÖ¼Ò·Î ÀÔ·ÂÇØ¾ß ÇÕ´Ï´Ù.\n"
-"(¿¹, 1.2.3.4)"
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "%s ³×Æ®¿÷ Ä«µå ¼³Á¤Áß"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (%s µå¶óÀ̹ö)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP ÁÖ¼Ò"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "³Ý¸¶½ºÅ©"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(BOOTP/DHCP)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "IP ÀÚµ¿ÇÒ´ç"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ÁÖ¼Ò´Â 1.2.3.4°ú °°Àº Çü½ÄÀ̾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"È£½ºÆ® À̸§À» ÀÔ·ÂÇØ ÁÖ¼¼¿ä.\n"
-"È£½ºÆ® À̸§Àº ``mybox.mylab.myco.com''°ú °°ÀÌ ¿ÏÀüÇÑ È£½ºÆ® \n"
-"À̸§À̾î¾ß ÇÕ´Ï´Ù. \n"
-"°ÔÀÌÆ® ¿þÀÌ°¡ ÀÖ´Ù¸é ±× IP ÁÖ¼Òµµ ÀÔ·ÂÇØ¾ß ÇÕ´Ï´Ù."
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS ¼­¹ö"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "°ÔÀÌÆ®¿þÀÌ"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "°ÔÀÌÆ®¿þÀÌ ÀåÄ¡"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "ÇÁ¶ô½Ã ¼³Á¤"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "À¥ ÇÁ¶ô½Ã"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP ÇÁ¶ô½Ã"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr "³×Æ®¿÷Ä«µå ID ÃßÀû (·¦Å¾¿¡ À¯¿ëÇÔ)"
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "ÇÁ¶ô½Ã À̸§Àº httP://... À̾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "ÇÁ¶ô½Ã À̸§Àº ftp://... À̾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "ÀÎÅÍ³Ý ¼³Á¤"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Áö±Ý ÀÎÅÍ³Ý ¿¬°áÀ» ½ÃµµÇØ º¸½Ã°Ú½À´Ï±î?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "¿¬°á Å×½ºÆ® Áß..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Áö±Ý ½Ã½ºÅÛÀÌ ÀÎÅͳݿ¡ ¿¬°áµÇ¾ú½À´Ï´Ù."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "º¸¾È»óÀÇ ÀÌÀ¯·Î ÀÌÁ¦ ¿¬°áÀ» ²÷À» °ÍÀÔ´Ï´Ù."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"½Ã½ºÅÛÀÌ ÀÎÅͳݿ¡ ¿¬°áµÇÁö ¾ÊÀº µíÇÕ´Ï´Ù.\n"
-"¿¬°á ¼³Á¤À» ´Ù½ÃÇØ º¸¼¼¿ä."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "¿¬°á ¼³Á¤"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "¾Æ·¡ ¾ç½ÄÀ» ä¿ö ÁÖ¼¼¿ä."
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "Ä«µå IRQ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Ä«µå ¸Þ¸ð¸® (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "Ä«µå IO"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "Ä«µå IO_0"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "Ä«µå IO_1"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "´ÔÀÇ °³ÀÎ ÀüÈ­ ¹øÈ£"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "°ø±ÞÀÚ À̸§ (¿¹ provider.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "°ø±ÞÀÚ ÀüÈ­¹øÈ£"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "°ø±ÞÀÚ DNS 1 (¿É¼Ç)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "°ø±ÞÀÚ DNS 2 (¿É¼Ç)"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "±¹°¡ ¼±ÅÃ"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "´ÙÀÌ¾ó¸µ ¸ðµå"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "¿¬°á ¼Óµµ"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "¿¬°á ½Ã°£ÃÊ°ú (ÃÊ)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "·Î±×ÀÎ °èÁ¤(»ç¿ëÀÚ¸í)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "°èÁ¤ ¾ÏÈ£"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "ÀÌ ½Ã½ºÅÛ¿¡¼­´Â È®ÀåÆÄƼ¼ÇÀÌ Áö¿øµÇÁö ¾Ê½À´Ï´Ù."
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"ÆÄƼ¼Ç Å×ÀÌºí¿¡¼­ ºó °ø°£ÀÌ ÀÖÁö¸¸ »ç¿ëÇÒ ¼ö ¾ø½À´Ï´Ù.\n"
-"À¯ÀÏÇÑ ÇØ°áÃ¥Àº ÁÖ ÆÄƼ¼ÇµéÀÌ È®Àå ÆÄƼ¼ÇµéÀÇ µÚ¿¡ ÀÖ´Â ºó °ø°£À» Â÷ÁöÇϵµ·Ï "
-"¿È±â´Â °ÍÀÔ´Ï´Ù."
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "%s ÆÄÀϷκÎÅÍÀÇ º¹±¸ ½ÇÆÐ: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "À߸øµÈ ¹é¾÷ ÆÄÀÏ"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "%s ÆÄÀÏ¿¡ ¾²±â ¿À·ù"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Çϵåµå½ºÅ©¿¡ ÀÌ»óÀÌ ¹ß»ýÇß½À´Ï´Ù. \n"
-"µ¥ÀÌÅÍ ¹«°á¼º °Ë»ç°¡ ½ÇÆÐÇß½À´Ï´Ù. \n"
-"ÀÌ°ÍÀº µð½ºÅ©¿¡ ±â·ÏµÇ´Â µ¥ÀÌÅ͸¦ ÀÒ¾î ¹ö¸°´Ù´Â °ÍÀ» ÀǹÌÇÕ´Ï´Ù."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "Çʼö ÆÑÅ°Áö"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "Áß¿äÇÑ ÆÑÅ°Áö"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "ÈǸ¢ÇÑ ÆÑÅ°Áö"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "ÁÁÀº ÆÑÅ°Áö"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "±¦ÂúÀº ÆÑÅ°Áö"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "·ÎÄà ÇÁ¸°ÅÍ"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "¿ø°Ý ÇÁ¸°ÅÍ"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "¿ø°Ý CUPS ¼­¹öÀÇ ÇÁ¸°ÅÍ"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "¿ø°Ý LPD ¼­¹öÀÇ ÇÁ¸°ÅÍ"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "³×Æ®¿÷ ÇÁ¸°ÅÍ (¼ÒÄÏ)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "»ï¹Ù/À©µµ¿ìÁî 95/98/NT»óÀÇ ÇÁ¸°ÅÍ"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "³×Æ®¿þ¾î ¼­¹ö»óÀÇ ÇÁ¸°ÅÍ"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "ÇÁ¸°ÅÍ ÀåÄ¡ URIÀ» ÀÔ·ÂÇϼ¼¿ä."
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "ÀÛ¾÷À» ¸í·ÉÀ¸·Î ÆÄÀÌÇÁ ¿¬°á"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "¾Ë ¼ö¾ø´Â ¸ðµ¨"
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr "³¯(RAW) ÇÁ¸°ÅÍ (µå¶óÀ̹ö »ç¿ë¾ÈÇÔ)"
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(%s¿¡)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "(ÀÌ ¼­¹ö»óÀÇ)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "ÇÁ¸°ÅÍ ¿¬°á¹æ¹ýÀ» ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "ÇÁ¸°ÅÍ°¡ ¾î¶»°Ô ¿¬°áµÇ¾î ÀÖ½À´Ï±î?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"¿ø°Ý CUPS ¼­¹öÀÇ ÇÁ¸°ÅÍ´Â ¿©±â¼­ ¼³Á¤ÇÒ ÇÊ¿ä°¡ \n"
-"¾ø½À´Ï´Ù; ÀÌ·± ÇÁ¸°ÅÍ´Â ÀÚµ¿À¸·Î °¨ÁöµÇ¾î Áý´Ï´Ù. ÀÌ¿Í °°Àº °æ¿ì\n"
-"¡¸¿ø°Ý CUPS ¼­¹öÀÇ ÇÁ¸°ÅÍ¡¹¸¦ ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "¾ø½¿"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-msgid "Choose a default printer!"
-msgstr "±âº» ÇÁ¸°Å͸¦ ¼±ÅÃÇϼ¼¿ä!"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-"¿ø°Ý CUPS ¼­¹ö¿¡ ´ëÇؼ­´Â ¿©±â¼­ ÇÁ¸°Å͸¦ ¼³Á¤ÇÒ ÇÊ¿ä°¡\n"
-"¾ø½À´Ï´Ù; CUPS ¼­¹ö´Â ÀÚµ¿À¸·Î ÇÁ¸°ÅÍ Á¤º¸¸¦ ¾Ë·ÁÁÝ´Ï´Ù.\n"
-"ÇöÀç ¾Ë·ÁÁø ¸ðµç ÇÁ¸°ÅÍ´Â ¡¸±âº» ÇÁ¸°ÅÍ¡¹¿µ¿ª¿¡ ³ª¿­µË´Ï´Ù.\n"
-"±âº» ÇÁ¸°ÅÍ·Î »ç¿ëÇÒ ÇÁ¸°Å͸¦ ¼±ÅÃÇÏ°í ¡¸Àû¿ë/ÇÁ¸°ÅÍ ´Ù½Ã Àб⡹\n"
-"¹öÆ°À» ´©¸£¼¼¿ä. ÇÁ¸°ÅÍ ¸ñ·ÏÀ» °»½ÅÇÏ·Á ÇÒ¶§µµ µ¿ÀÏÇÑ ¹öÆ°À»\n"
-"´©¸£¼¼¿ä. (CUPS°¡ ½ÃÀÛµÈ ÈÄ, ¸ðµç ¿ø°Ý ÇÁ¸°ÅÍ°¡ º¸¿©Áö±â±îÁö´Â\n"
-"30ÃÊ °¡·®ÀÇ ½Ã°£ÀÌ °É¸³´Ï´Ù.)\n"
-"CUPS ¼­¹ö°¡ ´Ù¸¥ ³×Æ®¿÷¿¡ ÀÖ´Ù¸é, CUPS ¼­¹öÀÇ IP ÁÖ¼Ò¿Í\n"
-"Æ÷Æ® ¹øÈ£(¿É¼Ç)¸¦ ÁöÁ¤Çؾ߸¸ ¼­¹ö·ÎºÎÅÍ ÇÁ¸°ÅÍ Á¤º¸¸¦ ¹Þ¾Æ¿Ã ¼ö\n"
-"ÀÖ½À´Ï´Ù. ÀÌ·± °æ¿ì°¡ ¾Æ´Ï¶ó¸é ÀÌ ¿µ¿ªµéÀº ±×³É ºñ¿öµÎ¼¼¿ä."
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"ÀϹÝÀûÀ¸·Î CUPS´Â ³×Æ®¿÷ȯ°æ¿¡ µû¶ó ÀÚµ¿À¸·Î ¼³Á¤µÇ±â\n"
-"¶§¹®¿¡, Áö¿ª ³×Æ®¿÷¿¡ ÀÖ´Â CUPS ¼­¹öÀÇ ÇÁ¸°Å͸¦ »ç¿ëÇÒ\n"
-"¼ö ÀÖ½À´Ï´Ù. ±×·¯³ª ¸¸¾à¿¡ ÀÌ°ÍÀÌ ¿Ã¹Ù¸£°Ô ÀÛµ¿ÇÏÁö ¾ÊÀ¸¸é,\n"
-"¡¸ÀÚµ¿ CUPS ¼³Á¤¡¹À» ÇØÁ¦ÇϽðí, ¡¸/etc/cups/cupsd.conf¡¹\n"
-"¸¦ Á÷Á¢ ¼öÁ¤ÇØ ÁÖ¼¼¿ä. ³ªÁß¿¡ CUPS¸¦ ´Ù½Ã ½ÇÇàÇÏ´Â °ÍÀ»\n"
-"ÀØÁö¸¶¼¼¿ä. (¸í·É¾î: ¡¸service cups restart¡¹ )"
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "´Ý±â"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "Àû¿ë/ÇÁ¸°ÅÍ ´Ù½ÃÀбâ"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ÁÖ¼Ò´Â ¡¸192.168.1.20¡¹°ú °°Àº Çü½ÄÀ̾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "Æ÷Æ® ¹øÈ£´Â Á¤¼öÀ̾î¾ß ÇÕ´Ï´Ù!"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "±âº» ÇÁ¸°ÅÍ"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "CUPS ¼­¹ö IP"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Æ÷Æ®"
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr "ÀÚµ¿ CUPS ¼³Á¤"
-
-#: ../../printerdrake.pm_.c:217
-msgid "Detecting devices ..."
-msgstr "ÀåÄ¡ °Ë»ö Áß ..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Æ÷Æ® °Ë»ç"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "ÇÁ¸°ÅÍ, ¸ðµ¨ \"%s\", ¹ß°ß"
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Áö¿ª ÇÁ¸°ÅÍ ÀåÄ¡"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"¾î´À ÀåÄ¡¿¡ ÇÁ¸°ÅÍ°¡ ¿¬°áµÇ¾î ÀÖ½À´Ï±î? \n"
-"(ÁÖÀÇ: ¡¸/dev/lp0¡¹´Â ¡¸LPT1¡¹¿¡ ÇØ´çÇÕ´Ï´Ù.)\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "ÇÁ¸°ÅÍ ÀåÄ¡"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "ÀåÄ¡/ÆÄÀÏ À̸§À» ãÀ» ¼ö ¾øÀ½!"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-msgid "Reading printer database ..."
-msgstr "ÇÁ¸°ÅÍ µ¥ÀÌÅͺ£À̽º Àд Áß ..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "¿ø°Ý LPD ÇÁ¸°ÅÍ ¿É¼Ç"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"¿ø°Ý LPD ÇÁ¸°Å͸¦ »ç¿ëÇϱâ À§Çؼ­´Â\n"
-"±× ÇÁ¸°ÅÍ ¼­¹öÀÇ È£½ºÆ®¸í°ú ±× ¼­¹ö»óÀÇ ÇÁ¸°ÅÍ À̸§À»\n"
-"ÀÔ·ÂÇØ¾ß ÇÕ´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "¿ø°Ý È£½ºÆ®¸í"
-
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "¿ø°Ý ÇÁ¸°Å͸í"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "¿ø°Ý È£½ºÆ®¸íÀ» ãÀ» ¼ö ¾øÀ½!"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "¿ø°Ý ÇÁ¸°Å͸íÀÌ ºüÁ³½À´Ï´Ù!!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) ÇÁ¸°ÅÍ ¿É¼Ç"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"»ï¹Ù ÇÁ¸°ÅÍ·Î ÀμâÇÏ·Á¸é, »ï¹Ù ¼­¹öÀÇ È£½ºÆ®¸í \n"
-"(ÁÖÀÇ! ±× ¼­¹öÀÇ TCP/IP È£½ºÆ®¸í°ú´Â À̸§ÀÌ ´Ù¸¦ ¼ö ÀÖ½À´Ï´Ù.)°ú, \n"
-"°¡´ÉÇÏ´Ù¸é, ±× ¼­¹öÀÇ IP ÁÖ¼Ò ±×¸®°í ¾×¼¼½ºÇÏ·Á´Â ÇÁ¸°ÅÍÀÇ \n"
-"°øÀ¯ À̸§, Á¤½Ä »ç¿ëÀÚ¸í, ¾ÏÈ£, ÀÛ¾÷±×·ì¸íÀ» \n"
-"ÀÔ·ÂÇØ¾ß ÇÕ´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "SMB ¼­¹ö È£½ºÆ®"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "SMB ¼­¹ö IP"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "°øÀ¯ À̸§"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "ÀÛ¾÷ ±×·ì"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "¼­¹ö À̸§ ¶Ç´Â ¼­¹ö IP¸¦ ÀÔ·ÂÇØ¾ß ÇÕ´Ï´Ù!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "»ï¹Ù °øÀ¯ À̸§À» ãÀ» ¼ö ¾øÀ½!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "³Ý¿þ¾î ÇÁ¸°ÅÍ ¿É¼Ç"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"³Ý¿þ¾î ÇÁ¸°ÅÍ·Î ÀμâÇÏ·Á¸é, ³Ý¿þ¾î ¼­¹öÀÇ È£½ºÆ®¸í \n"
-"(ÁÖÀÇ! ±× ¼­¹öÀÇ TCP/IP È£½ºÆ®¸í°ú´Â À̸§ÀÌ ´Ù¸¦ ¼ö ÀÖ½À´Ï´Ù.)°ú \n"
-"¾×¼¼½ºÇÏ·Á´Â ÇÁ¸°ÅÍÀÇ Å¥ À̸§, Á¤½Ä »ç¿ëÀÚ¸í, ¾ÏÈ£¸¦ \n"
-"ÀÔ·ÂÇØ¾ß ÇÕ´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "ÇÁ¸°ÅÍ ¼­¹ö"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "ÇÁ¸°Æ® Å¥ À̸§"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "NCP ¼­¹ö À̸§À» ãÀ» ¼ö ¾øÀ½!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "NCP Å¥ À̸§À» ãÀ» ¼ö ¾øÀ½!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "¼ÒÄÏ ÇÁ¸°ÅÍ ¿É¼Ç"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"¼ÒÄÏ ÇÁ¸°ÅÍ·Î ÀμâÇϱâ À§Çؼ­´Â, ÇÁ¸°ÅÍÀÇ È£½ºÆ®¸í°ú \n"
-"Æ÷Æ® ¹øÈ£(¿É¼Ç)¸¦ ÁöÁ¤ÇØ¾ß ÇÕ´Ï´Ù. HP JetDirect ¼­¹ö»ó¿¡¼­´Â\n"
-"ÀϹÝÀûÀ¸·Î 9100 Æ÷Æ®¸¦ »ç¿ëÇÏÁö¸¸, ´Ù¸¥ ¼­¹ö»ó¿¡¼­´Â °¢±â\n"
-"´Ù¸¦ ¼ö ÀÖ½À´Ï´Ù. Çϵå¿þ¾î ¼³¸í¼­¸¦ ÂüÁ¶Çϼ¼¿ä."
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "ÇÁ¸°ÅÍ È£½ºÆ®¸í"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "ÇÁ¸°ÅÍ È£½ºÆ®¸íÀ» ãÀ» ¼ö ¾øÀ½!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "ÇÁ¸°ÅÍ ÀåÄ¡ URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"ÇÁ¸°ÅÍ ¾×¼¼½º ÁÖ¼Ò¸¦ Á÷Á¢ ÁöÁ¤ÇÒ ¼ö ÀÖ½À´Ï´Ù. ÁÖ¼Ò´Â CUPS ¶Ç´Â Foomatic ±ÔÁ¤"
-"À» ÁؼöÇØ¾ß ÇÕ´Ï´Ù. ±×·¸Áö ¾ÊÀº ÁÖ¼Ò´Â ¸ðµç ½ºÇ®·¯°¡ Áö¿øÇÏÁö ¾Ê½À´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "À¯È¿ÇÑ ÁÖ¼Ò¸¦ ÀÔ·ÂÇϼ¼¿ä!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"¸ðµç ÇÁ¸°ÅÍ´Â À̸§ÀÌ ÀÖ¾î¾ß ÇÕ´Ï´Ù.(¿¹, lp)\n"
-"¼³¸í°ú À§Ä¡ ºÎºÐÀ» ÀÔ·ÂÇÒ ÇÊ¿ä´Â ¾ø½À´Ï´Ù.\n"
-"±×°ÍµéÀº ´ÜÁö »ç¿ëÀÚµéÀ» À§ÇÑ ºÎ¿¬¼³¸íÀÏ »ÓÀÔ´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "ÇÁ¸°ÅÍ À̸§"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "¼³¸í"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "À§Ä¡"
-
-#: ../../printerdrake.pm_.c:701
-msgid "Preparing printer database ..."
-msgstr "ÇÁ¸°ÅÍ µ¥ÀÌÅͺ£À̽º Áغñ Áß ..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "ÇÁ¸°ÅÍ ¸ðµ¨ ¼±ÅÃ"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "¾î¶² ÇÁ¸°Å͸¦ °¡Áö°í ÀÖ½À´Ï±î?"
-
-#: ../../printerdrake.pm_.c:866
-msgid "OKI winprinter configuration"
-msgstr "OKI À©ÇÁ¸°ÅÍ ¼³Á¤"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-msgid "Lexmark inkjet configuration"
-msgstr "·º½º¸¶Å© À×Å©Á¬ ¼³Á¤"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"ÇÁ¸°ÅÍ ±âº»°ª ¼³Á¤\n"
-"ÆäÀÌÁö Å©±â¿Í (¸¸¾à À¯È¿ÇÏ´Ù¸é) À×Å© À¯ÇüÀÌ ¿Ã¹Ù¸¥Áö\n"
-"Àß È®ÀÎÇϼ¼¿ä. °íÇ°Áú Àμ⹰À» ¾ò±âÀ§Çؼ­´Â Àμ⠼ӵµ°¡\n"
-"±× ¸¸Å­ ´À·ÁÁø´Ù´Â °ÍÀ» ¾Ë°í °è¼¼¿ä."
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "%s ¿É¼ÇÀº Á¤¼ö ¹øÈ£À̾î¾ß ÇÕ´Ï´Ù!"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "%s ¿É¼ÇÀº ¼ýÀÚÀ̾î¾ß ÇÕ´Ï´Ù!"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "%s ¿É¼Ç ¹üÀ§ ÃÊ°ú!"
-
-#: ../../printerdrake.pm_.c:1136
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"ÀÌ ÇÁ¸°ÅÍ(%s)¸¦\n"
-"±âº» ÇÁ¸°ÅÍ·Î ÇϽðڽÀ´Ï±î?"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "½ÃÇè ÆäÀÌÁö"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"ÀμâÇÒ ½ÃÇè ÆäÀÌÁö¸¦ ¼±ÅÃÇϼ¼¿ä.\n"
-"ÁÖÀÇ: »çÁø ½ÃÇè ÆäÀÌÁö¸¦ ÀμâÇϱâ À§Çؼ­´Â ´Ù¼Ò ½Ã°£ÀÌ °É¸± ¼ö ÀÖ½À´Ï´Ù.\n"
-"±×¸®°í Àú¿ë·®ÀÇ ¸Þ¸ð¸®¸¦ °¡Áø ·¹ÀÌÀú ÇÁ¸°ÅÍ¿¡¼­´Â\n"
-"ÆäÀÌÁö°¡ ³ª¿ÀÁö ¾ÊÀ» ¼öµµ ÀÖ½À´Ï´Ù.\n"
-"Ç¥ÁØ ½ÃÇè ÆäÀÌÁö´Â ´ë°³ Àß ÀμâµË´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "½ÃÇè ÆäÀÌÁö ¾øÀ½"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "Àμâ"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "Ç¥ÁØ ½ÃÇè ÆäÀÌÁö"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr "´Ù¸¥ ½ÃÇè ÆäÀÌÁö (Letter)"
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr "½ÃÇè ÆäÀÌÁö È°¼ºÈ­ (A4)"
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "»çÁø ½ÃÇè ÆäÀÌÁö"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "½ÃÇè ÆäÀÌÁö Àμâ Áß..."
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"½ÃÇè Àμâ ÆäÀÌÁö¸¦ ÇÁ¸°ÅÍ·Î º¸³Â½À´Ï´Ù.\n"
-"ÀμâµÇ±â±îÁö ¾à°£ÀÇ ½Ã°£ÀÌ °É¸± ¼ö ÀÖ½À´Ï´Ù.\n"
-"Àμ⠻óȲ: \n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"½ÃÇè Àμâ ÆäÀÌÁö¸¦ ÇÁ¸°ÅÍ·Î º¸³Â½À´Ï´Ù.\n"
-"ÀμâµÇ±â±îÁö ¾à°£ÀÇ ½Ã°£ÀÌ °É¸± ¼ö ÀÖ½À´Ï´Ù.\n"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "¿Ã¹Ù¸£°Ô ÀÛµ¿Çß½À´Ï±î?"
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-msgid "Raw printer"
-msgstr "³¯(RAW) ÇÁ¸°ÅÍ"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"¸í·ÉÇà(Å͹̳ΠÀ©µµ¿ì)¿¡¼­ ÆÄÀÏÀ» ÀμâÇÏ·Á¸é, ¡¸%s <ÆÄÀÏ>¡¹¸í·ÉÀ» »ç¿ëÇϼ¼"
-"¿ä.\n"
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-"ÇöÀç ÇÁ¸°ÅÍ¿¡ »ç¿ëÇÒ ¼ö ÀÖ´Â ¿É¼Ç ¸ñ·ÏÀ» º¸·Á¸é, ¡¸ÀÎ¼â ¿É¼Ç ¸ñ·Ï¡¹À» ´©¸£¼¼"
-"¿ä.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"¸í·ÉÇà(Å͹̳ΠÀ©µµ¿ì)¿¡¼­ ÆÄÀÏÀ» ÀμâÇÏ·Á¸é, ¡¸%s <ÆÄÀÏ>¡¹ ¶Ç´Â ¡¸%s <ÆÄÀÏ>¡¹"
-"¸í·ÉÀ» »ç¿ëÇϼ¼¿ä.\n"
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"¡¸%s¡¹¿Í¡¸%s¡¹¸í·ÉÀº ¶ÇÇÑ Æ¯Á¤ Àμâ ÀÛ¾÷À» À§ÇÑ ¿É¼Ç ¼³Á¤À» ¼öÁ¤ÇÒ ¼ö ÀÖ°Ô ÇÕ"
-"´Ï´Ù. ¸í·ÉÇà¿¡ ¿øÇÏ´Â ¼³Á¤°ªÀ» Ãß°¡Çϼ¼¿ä, ¿¹: ¡¸%s <ÆÄÀÏ>¡¹.\n"
-
-#: ../../printerdrake.pm_.c:1292
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "ÇÁ¸°ÅÍ¡¸%s¡¹»ó¿¡¼­ Àμâ Áß"
-
-#: ../../printerdrake.pm_.c:1294
-msgid "Print option list"
-msgstr "ÇÁ¸°ÅÍ ¿É¼Ç ¸ñ·Ï"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "ÇÁ¸°ÅÍ µ¥ÀÌÅÍ Àд Áß ..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "ÇÁ¸°ÅÍ ¼³Á¤ Àü¼Û"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-"½ºÇ®·¯ %s¸¦ À§ÇØ »ç¿ëÇÑ ÇÁ¸°ÅÍ ¼³Á¤À» ÇöÀç ½ºÇ®·¯ÀÎ %s·Î\n"
-"º¹»çÇÒ ¼ö ÀÖ½À´Ï´Ù. ¸ðµç ¼³Á¤ µ¥ÀÌÅÍ(ÇÁ¸°Å͸í, ¼³¸í, À§Ä¡,\n"
-"¿¬°á À¯Çü, ±×¸®°í ±âº» ¿É¼Ç°ªµé)°¡ ³Ñ°ÜÁú °ÍÀÔ´Ï´Ù.\n"
-"±×·¯³ª ÀÛ¾÷µéÀº Àü¼ÛµÇÁö ¾Ê½À´Ï´Ù.\n"
-"´ÙÀ½°ú °°Àº ÀÌÀ¯·ÎÀÎÇÏ¿© ¸ðµç Å¥°¡ Àü¼ÛµÉ ¼ö´Â ¾ø½À´Ï´Ù:\n"
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-"CUPS´Â ³ëº§ ¼­¹ö»óÀÇ ÇÁ¸°Åͳª ÀÚÀ¯Çü½Ä ¸í·É¾î·Î µ¥ÀÌÅ͸¦ º¸³»´Â\n"
-"ÇÁ¸°ÅÍ´Â Áö¿øÇÏÁö ¾Ê½À´Ï´Ù.\n"
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-"LPQ´Â ´ÜÁö Áö¿ª ÇÁ¸°ÅÍ, ¿ø°Ý LPD ÇÁ¸°ÅÍ ±×¸®°í ¼ÒÄÏ/TCP\n"
-"ÇÁ¸°Å͸¸À» Áö¿øÇÕ´Ï´Ù.\n"
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD¿Í LPRng´Â IPP ÇÁ¸°Å͸¦ Áö¿øÇÏÁö ¾Ê½À´Ï´Ù.\n"
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-"±×¸®°í ¶ÇÇÑ, ÀÌ ÇÁ·Î±×·¥À̳ª ¡¸Foomatic ¼³Á¤¡¹À¸·Î\n"
-"»ý¼ºµÇÁö ¾ÊÀº Å¥´Â Àü¼ÛµÉ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-"\n"
-"¶ÇÇÑ Á¦Á¶¾÷ü°¡ Á¦°øÇÑ PPD ÆÄÀÏÀ̳ª CUPS Æ÷ÇÔ µå¶óÀ̹ö·Î\n"
-"¼³Á¤µÈ ÇÁ¸°Å͵µ Àü¼ÛµÉ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Àü¼ÛÇÏ·Á´Â ÇÁ¸°Å͵éÀ» ¼±ÅÃÇÑ ÈÄ¿¡ ¡¸Àü¼Û¡¹À» ´©¸£¼¼¿ä."
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "ÇÁ¸°ÅÍ Àü¼Û ÇÏÁö¾ÊÀ½"
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "Àü¼Û"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"ÇÁ¸°ÅÍ ¡¸%s¡¹°¡ ÀÌ¹Ì %sÇÏ¿¡ Á¸ÀçÇÔ´Ï´Ù.\n"
-"µ¤¾î ¾µ·Á¸é ¡¸Àü¼Û¡¹À» ´©¸£¼¼¿ä.\n"
-"»õ À̸§À» ÀÔ·ÂÇϰųª ÀÌ ÇÁ¸°Å͸¦ Áö³ªÄ¥ ¼öµµ ÀÖ½À´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "ÇÁ¸°ÅÍ À̸§¿¡´Â ¹®ÀÚ, ¼ýÀÚ ±×¸®°í ¹ØÁÙ(Underscore)¸¸ ÀÖ¾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"ÇÁ¸°ÅÍ ¡¸%s¡¹°¡ ÀÌ¹Ì Á¸ÀçÇÕ´Ï´Ù.\n"
-"Á¤¸»·Î ±âÁ¸ ¼³Á¤À» µ¤¾î ¾µ±î¿ä?"
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "»õ ÇÁ¸°ÅÍ À̸§"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "%s Àü¼Û Áß ..."
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-"ÀÌÀü ±âº» ÇÁ¸°ÅÍ(¡¸%s¡¹)¸¦ Àü¼ÛÇÏ¿´½À´Ï´Ù.\n"
-"»õ ÇÁ¸°Æà ½Ã½ºÅÛ %sÇÏ¿¡¼­ ±×°ÍÀÌ ¶ÇÇÑ ±âº» ÇÁ¸°ÅÍ°¡\n"
-"µÇµµ·Ï ÇϽðڽÀ´Ï±î?"
-
-#: ../../printerdrake.pm_.c:1423
-msgid "Refreshing printer data ..."
-msgstr "ÇÁ¸°ÅÍ µ¥ÀÌÅÍ °»½Å Áß ..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr "¿ø°Ý ÇÁ¸°ÅÍ ¼³Á¤"
-
-#: ../../printerdrake.pm_.c:1432
-msgid "Starting network ..."
-msgstr "³×Æ®¿÷ ¿¬°á Áß..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-msgid "Configure the network now"
-msgstr "Áö±Ý ³×Æ®¿÷ ¼³Á¤"
-
-#: ../../printerdrake.pm_.c:1455
-msgid "Network functionality not configured"
-msgstr "³×Æ®¿÷ ±â´ÉÀÌ ¼³Á¤µÇÁö ¾Ê¾Ò½À´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-"¿ø°Ý ÇÁ¸°Å͸¦ ¼³Á¤ÇÏ·Á ÇÕ´Ï´Ù. ±×·¯±â À§Çؼ­´Â ³×Æ®¿÷ÀÌ\n"
-"µ¿ÀÛÇÏ°í ÀÖ¾î¾ß Çϴµ¥, ¾ÆÁ÷ ³×Æ®¿÷ ¼³Á¤ÀÌ µÇ¾î ÀÖÁö ¾Ê½À´Ï´Ù.\n"
-"³×Æ®¿÷ ¼³Á¤¾øÀÌ °è¼Ó ÁøÇàÇϸé, Áö±Ý ¼³Á¤ÇÏ°í ÀÖ´Â ÇÁ¸°Å͸¦\n"
-"»ç¿ëÇÒ ¼ö ¾ø½À´Ï´Ù.\n"
-"¾î¶»°Ô ÇϽðڽÀ´Ï±î?"
-
-#: ../../printerdrake.pm_.c:1463
-msgid "Go on without configuring the network"
-msgstr "³×Æ®¿÷ ¼³Á¤ ¾øÀÌ °è¼Ó"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-"¼³Ä¡°úÁ¤¿¡¼­ ¼³Á¤ÇÑ ³×Æ®¿÷À» ½ÃÀÛÇÒ ¼ö ¾ø½À´Ï´Ù.\n"
-"½Ã½ºÅÛÀÌ ºÎÆÃµÉ ¶§, ³×Æ®¿÷ÀÌ ÀÚµ¿ ½ÇÇàµÇµµ·Ï µÇ¾î ÀÖ´ÂÁö\n"
-"È®ÀÎÇÏ°í, ¸Çµå·¹ÀÌÅ© Á¦¾î ¼¾ÅÍ(¡¸³×Æ®¿÷°ú ÀÎÅͳݡ¹->¡¸¿¬°á¡¹)\n"
-"¸¦ ÀÌ¿ëÇÏ¿© ¿Ã¹Ù¸£°Ô ¼³Á¤Çϼ¼¿ä.±×¸®°í³ª¼­ ´Ù½Ã ¸Çµå·¹ÀÌÅ© Á¦¾î ¼¾ÅÍ(¡¸Çϵå¿þ"
-"¾î¡¹->¡¸ÇÁ¸°ÅÍ¡¹)\n"
-"¸¦ ÀÌ¿ëÇÏ¿©, ÇÁ¸°ÅÍ ¼³Á¤À»\n"
-"´Ù½Ã ÇØ º¸¼¼¿ä."
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-"³×Æ®¿÷ Á¢±ÙÀÌ ºÒ°¡´ÉÇßÀ¸¸ç, ½ÃÀÛÇÒ ¼öµµ ¾ø¾ú½À´Ï´Ù.\n"
-"³×Æ®¿÷ ¼³Á¤°ú Çϵå¿þ¾î¸¦ Á¡°ËÇØ ÁÖ¼¼¿ä.\n"
-"±×¸®°í³ª¼­ ¿ø°Ý ÇÁ¸°ÅÍ ¼³Á¤À» ´Ù½Ã ½ÃµµÇØ\n"
-"º¸¼¼¿ä."
-
-#: ../../printerdrake.pm_.c:1516
-msgid "Restarting printing system ..."
-msgstr "Àμ⠽ýºÅÛ Àç½ÇÇà Áß ..."
-
-#: ../../printerdrake.pm_.c:1548
-msgid "high"
-msgstr "³ôÀ½"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "paranoid"
-msgstr "ÃÖ°í"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "º¸¾È ¼öÁØ %s·Î Àμ⠽ýºÅÛ ¼³Ä¡ Áß"
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-"Áö±Ý ´ÔÀº º¸¾È¼öÁØ %2$s·Î ¿î¿ëµÇ´Â ½Ã½ºÅÛ¿¡\n"
-"Àμ⠽ýºÅÛ %1$sÀ» ¼³Ä¡ÇÏ·Á°í ÇÕ´Ï´Ù.\n"
-"\n"
-"Àμ⠽ýºÅÛÀº ÀμâÀÛ¾÷À» ±â´Ù·È´Ù°¡ ó¸®ÇÏ´Â\n"
-"´ë¸ó(¹é±×¶ó¿îµå ÇÁ·Î¼¼½º)¸¦ ½ÇÇà½Ãŵ´Ï´Ù.\n"
-"¿ø°Ý ½Ã½ºÅÛ¿¡¼­ ³×Æ®¿÷À¸·Î ÀÌ ´ë¸ó¿¡ Á¢±ÙÇÒ ¼öµµ\n"
-"Àֱ⠶§¹®¿¡, Å©·¡Ä¿µéÀÇ »ç³É°¨ÀÌ µÇ±âµµ ÇÕ´Ï´Ù.\n"
-"µû¶ó¼­ ÇöÀç º¸¾È ¼öÁØ¿¡¼­´Â ´ÜÁö ¸î¸îÀÇ ¸Å¸óµé¸¸\n"
-"½ÇÇàµÇµµ·Ï ¼±ÅõǴ °ÍÀÌ ±âº»ÀÔ´Ï´Ù.\n"
-"\n"
-"Á¤¸»·Î ÀÌ ÄÄÇ»ÅÍ»óÀÇ Àμ⠼³Á¤À»\n"
-"¿øÇϽʴϱî? "
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Starting the printing system at boot time"
-msgstr "ºÎÆýà Àμ⠽ýºÅÛ ÀÚµ¿½ÇÇà"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-"Àμ⠽ýºÅÛ(%s)´Â ÄÄÇ»ÅÍ°¡ ºÎÆÃÇÒ ¶§ ÀÚµ¿À¸·Î ½ÇÇàµÇÁö\n"
-"¾ÊÀ» °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"Àμ⠽ýºÅÛÀº Å©·¡Ä¿µéÀÇ ÀáÀçÀûÀÎ °ø°Ý¸ñÇ¥À̱⠶§¹®¿¡,\n"
-"º¸¾È ¼öÁØÀ» ³ô°Ô ÇÏ¿´À» ½Ã¿¡´Â ÀÚµ¿½ÇÇà ±â´ÉÀÌ ÇØÁ¦µÉ\n"
-"¼öµµ ÀÖµµ·Ï µÇ¾î ÀÖ½À´Ï´Ù.\n"
-"\n"
-"´Ù½Ã Àμ⠽ýºÅÛÀÇ ÀÚµ¿½ÇÇà ±â´ÉÀÌ È°¼ºÈ­µÇµµ·Ï\n"
-"ÇϽðڽÀ´Ï±î?"
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "¼³Ä¡µÈ ¼ÒÇÁÆ®¿þ¾î È®ÀÎ Áß ..."
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "LPRng Á¦°Å Áß ..."
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "LPD Á¦°Å Áß ..."
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "ÇÁ¸°ÅÍ ½ºÇ®·¯À» ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "¾î¶² Àμ⠽ýºÅÛ(½ºÇ®·¯)À» »ç¿ëÇϽðڽÀ´Ï±î?"
-
-#: ../../printerdrake.pm_.c:1759
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "ÇÁ¸°ÅÍ ¡¸%s¡¹ ¼³Á¤ Áß ..."
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "ÇÁ¸°ÅÍ ¿É¼Ç"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr "ÇÁ¸°Å͵巹ÀÌÅ© Áغñ Áß ..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "Àμ⠼³Á¤À» ÇϽðڽÀ´Ï±î?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr "Àμ⠽ýºÅÛ:"
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-"´ÙÀ½ ÇÁ¸°Å͵éÀÌ ¼³Á¤µÇ¾ú½À´Ï´Ù.\n"
-"¼öÁ¤ÇÏ°í ½Í°Å³ª,\n"
-"Á¤º¸¸¦ º¸°í ½Í´Ù¸é ÇÁ¸°Å͸¦ Ŭ¸¯Çϼ¼¿ä.\n"
-"»õ ÇÁ¸°Å͸¦ Ãß°¡ÇÏ°í ½Í´Ù¸é ¡¸ÇÁ¸°ÅÍ Ãß°¡¡¹¸¦ ´©¸£¼¼¿ä."
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "ÀÏ¹Ý ¸ðµå"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (±âº»°ª)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "¿ø°Ý CUPS ¼­¹öÀÇ ÇÁ¸°ÅÍ"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-msgid "Printer(s) on remote server(s)"
-msgstr "¿ø°Ý ¼­¹öÀÇ ÇÁ¸°ÅÍ"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "ÇÁ¸°ÅÍ Ãß°¡"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-msgid "Do you want to configure another printer?"
-msgstr "¶Ç´Ù¸¥ ÇÁ¸°Å͸¦ ¼³Á¤ÇϽðڽÀ´Ï±î?"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "ÀÎÅÍ³Ý ¼³Á¤ º¯°æ"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"ÇÁ¸°ÅÍ %s: %s: %s\n"
-"ÀÌ ÇÁ¸°ÅÍ¿¡ ´ëÇؼ­ ¹«¾ùÀ» ¼öÁ¤ÇϽðڽÀ´Ï±î?"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "½ÇÇà"
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "ÀÎÅÍ³Ý ¿¬°á À¯Çü"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "ÇÁ¸°ÅÍ À̸§, ¼³¸í, À§Ä¡"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "ÇÁ¸°ÅÍ Á¦Á¶¾÷ü, ¸ðµ¨, µå¶óÀ̹ö"
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "ÇÁ¸°ÅÍ Á¦Á¶¾÷ü, ¸ðµ¨"
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr "ÀÌ ÇÁ¸°Å͸¦ ±âº»À¸·Î ¼³Á¤"
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "½ÃÇè ÆäÀÌÁö Àμâ"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr "ÀÌ ÇÁ¸°ÅÍÀÇ Àμâ¹ý ¾Ë±â"
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "ÇÁ¸°ÅÍ Á¦°Å"
-
-#: ../../printerdrake.pm_.c:2071
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "±âÁ¸ ÇÁ¸°ÅÍ ¡¸%s¡¹ Á¦°Å Áß ..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "¡¸%s¡¹ÇÁ¸°ÅÍ°¡ ±âº» ÇÁ¸°ÅÍ·Î ¼³Á¤µÇ¾ú½À´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:2103
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Á¤¸»·Î ¡¸%s¡¹ÇÁ¸°Å͸¦ Á¦°ÅÇմϱî?"
-
-#: ../../printerdrake.pm_.c:2105
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "ÇÁ¸°ÅÍ ¡¸%s¡¹ Á¦°Å Áß ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "ÇÁ¶ô½Ã ¼³Á¤"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"ÇÁ¶ô½Ã ¼³Á¤ µµ±¸¿¡ Àß ¿À¼Ì½À´Ï´Ù.\n"
-"\n"
-"¿©±â¼­ ·Î±×Àΰú ºñ¹Ð¹øÈ£¸¦ ÇÊ¿ä ¶Ç´Â ÇÊ¿ä·ÎÇÏÁö ¾Ê´Â\n"
-"HTTP¿Í FTP ÇÁ¶ô½Ã¸¦ ¼³Á¤ÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"HTTP ÇÁ¶ô½Ã Á¤º¸¸¦ ÀÔ·ÂÇϼ¼¿ä.\n"
-"HTTP ÇÁ¶ô½Ã°¡ ÇÊ¿ä ¾ø´Ù¸é, °ø¶õÀ¸·Î µÎ¼¼¿ä."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "ÁÖ¼Ò"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "Æ÷Æ®"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "ÁÖ¼Ò´Â ¡¸http:¡¹·Î ½ÃÀÛÇØ¾ß ÇÕ´Ï´Ù."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Æ÷Æ® ºÎºÐÀº ¼ýÀÚÀ̾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"FTP ÇÁ¶ô½Ã Á¤º¸¸¦ ÀÔ·ÂÇϼ¼¿ä.\n"
-"FTP ÇÁ¶ô½Ã°¡ ÇÊ¿ä¾ø´Ù¸é, °ø¶õÀ¸·Î µÎ¼¼¿ä."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "ÁÖ¼Ò´Â ¡¸ftp:¡¹·Î ½ÃÀÛÇØ¾ß ÇÕ´Ï´Ù."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"ÇÁ¶ô½Ã ·Î±×Àΰú ºñ¹Ð¹øÈ£¸¦ ÀÔ·ÂÇϼ¼¿ä.\n"
-"·Î±×Àΰú ºñ¹Ð¹øÈ£°¡ ÇÊ¿äÄ¡ ¾Ê´Ù¸é, °ø¶õÀ¸·Î µÎ¼¼¿ä."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "·Î±×ÀÎ"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "ºñ¹Ð¹øÈ£"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "ºñ¹Ð¹øÈ£ È®ÀÎ"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "ºñ¹Ð¹øÈ£°¡ ÀÏÄ¡ÇÏÁö ¾Ê½À´Ï´Ù. ´Ù½Ã ÀÔ·ÂÇϼ¼¿ä!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Æ÷¸ËµÈ RAID md%d¿¡ ÆÄƼ¼ÇÀ» Ãß°¡ÇÒ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "%s ÆÄÀÏ¿¡ ¾µ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ½ÇÆÐ"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ½ÇÆÐ (raidtoolÀÌ ¼³Ä¡µÇ¾î ÀÖÁö ¾ÊÀ» ¼ö ÀÖ½À´Ï´Ù.)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "RAID ·¹º§ %d¸¦ À§ÇÑ ÆÄƼ¼ÇµéÀÌ ÃæºÐÇÏÁö ¾Ê½À´Ï´Ù.\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ALSA (Áøº¸µÈ ¸®´ª½º »ç¿îµå ¾ÆÅ°ÅØó) »ç¿îµå ½Ã½ºÅÛ ½ÇÇà"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "AnancronÀº ÁÖ±âÀûÀÎ ¸í·É ½ºÄÉÁì·¯ ÀÔ´Ï´Ù."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd´Â ¹èÅ͸® »óÅÂ¿Í syslog¸¦ °ÅÃļ­ ·Î±× ±â·ÏÀ» °¨½ÃÇϴµ¥ »ç¿ëµË´Ï´Ù.\n"
-"¶ÇÇÑ ¹èÅ͸®·®ÀÌ ¹Ì¾àÇÒ¶§ ÀÚµ¿À¸·Î ½Ã½ºÅÛÀ» ¼Ë´Ù¿î ½ÃÄÑÁÖ´Â ±â´Éµµ ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Á¤ÇØÁØ ½Ã°£¿¡ Çѹø¿¡ Çϳª¾¿ ½ÇÇà½Ãŵ´Ï´Ù. at´Â batch ¸í·ÉµéÀ» ½Ã½ºÅÛ\n"
-"·ÎµåÀ²ÀÌ ³·À»¶§ ¼öÇà½Ãŵ´Ï´Ù."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cronÀº »ç¿ëÀÚ°¡ ÁöÁ¤ÇÑ ÇÁ·Î±×·¥À» ÁÖ±âÀûÀ¸·Î ƯÁ¤ ½Ã°£¿¡ ½ÇÇà½ÃÅ°´Â \n"
-"Ç¥ÁØ UNIX ÇÁ·Î±×·¥ÀÔ´Ï´Ù. vixie cronÀº ÀÌ ±âº» UNIX Cron¿¡ Çâ»óµÈ º¸¾È°ú \n"
-"´õ °­·ÂÇÑ ¼³Á¤¿É¼Ç µîÀÇ ¸¹Àº Ư¡À» Ãß°¡ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPMÀº ÅؽºÆ® ±â¹Ý ÇÁ·Î±×·¥µé¿¡°Ô ¸¶¿ì½º ±â´ÉÀ» Áö¿øÇÕ´Ï´Ù.\n"
-"¶ÇÇÑ ÄÜ¼Ö È­¸é¿¡¼­ Àß¶ó¼­ ºÙÀ̱â¿Í Æ˾÷ ¸Þ´º ±â´ÉÀ» \n"
-"Áö¿øÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"Çϵåµå·¹ÀÌÅ©´Â Çϵå¿þ¾î °Ë»öÀ» ¼öÇàÇϸç, ÇÊ¿äÇÏ´Ù¸é\n"
-"»õ/º¯°æµÈ Çϵå¿þ¾î¸¦ ¼³Á¤ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"¾ÆÆÄÄ¡(Apache)´Â À¥ ¼­¹öÀÔ´Ï´Ù. ÀÌ°ÍÀº HTMLÀ̳ª CGI ÆÄÀÏ ¼­ºñ½º¸¦\n"
-"Çϴµ¥ »ç¿ëµË´Ï´Ù."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"(Åë»óÀûÀ¸·Î inetd¶ó°í ÇÏ´Â) ÀÎÅÍ³Ý ¼öÆÛ ´ë¸óÀº ´Ù¾çÇÑ ÀÎÅÍ³Ý ¼­¹ö¸¦\n"
-"ÇÊ¿äÇÑ ¶§ ½ÇÇà ½Ãŵ´Ï´Ù. ÅÚ³Ý, FTP, RSH, RLOGIN µî°ú °°Àº ¸¹Àº \n"
-"¼­ºñ½º¸¦ °ü¸®ÇÕ´Ï´Ù. ÀÌ°ÍÀÌ ½ÇÇàµÇ¾î ÀÖÁö ¾ÊÀ¸¸é, ¶ÇÇÑ ÀÌ°ÍÀÌ °ü¸®ÇÏ´Â\n"
-"¿©·¯ ¼­ºñ½ºµµ ¶ÇÇÑ ºÒ°¡´ÉÇÏ°Ô µË´Ï´Ù."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"2.2 Ä¿³Î ½Ã¸®Áî¿ë ÆÐŶ ÇÊÅ͸¦ ½ÇÇà, ³×Æ®¿÷ °ø°ÝÀ¸·ÎºÎÅÍ\n"
-"ÄÄÇ»Å͸¦ º¸È£ÇÏ´Â ¹æÈ­º®À» ±¸ÃàÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"ÀÌ ÆÑÅ°Áö´Â ¡¸/etc/sysconfig/keyboard¡¹¿¡ ¼³Á¤µÇ¾î ÀÖ´Â \n"
-"Å°º¸µå ¸ÊÀ» ÀûÀçÇÕ´Ï´Ù. Å°º¸µå´Â ¡¸kbdconfig¡¹¸í·ÉÀ¸·Î ¼±ÅÃÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-"´ëºÎºÐÀÇ ½Ã½ºÅÛ¿¡¼­ ÇÊ¿äÇÑ °ÍÀÔ´Ï´Ù."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"¡¸/usr/include/linux/{autoconf,version}.h¡¹¿¡ ´ëÇØ\n"
-"¡¸/boot¡¹¿¡ Ä¿³Î Çì´õ¸¦ ÀÚµ¿ »ý¼º."
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "ºÎÆýÿ¡ ÀÚµ¿ Çϵå¿þ¾î °Ë»ö ¹× ¼³Á¤."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"¸®´ª½º ¼³Á¤(Linuxconf)Àº ½Ã½ºÅÛ ¼³Á¤À» À¯ÁöÇϱâ À§ÇÏ¿©\n"
-"ºÎÆýÿ¡ ´Ù¾çÇÑ ÀÛ¾÷ ¼öÇàÀ» ÁغñÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"LPD´Â lpr ¸í·ÉÀÌ ¿Ã¹Ù¸£°Ô ÀÛµ¿Çϱâ À§ÇØ ÇÊ¿äÇÑ Àμ⠴ë¸óÀÔ´Ï´Ù.\n"
-"±Ùº»ÀûÀ¸·Î Àμâ ÀÛ¾÷µéÀ» ÇÁ¸°ÅÍ·Î ÁßÀçÇØ ÁÖ´Â ¼­¹öÀÔ´Ï´Ù."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"¸®´ª½º °¡»ó ¼­¹ö, °í¼º´É ¼­¹ö ±¸Ãà¿¡\n"
-"»ç¿ëµË´Ï´Ù."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"NAMED(BIND)´Â È£½ºÆ® À̸§À¸·Î IP ÁÖ¼Ò¸¦ ã¾Æ³»´Âµ¥ »ç¿ëµÇ´Â\n"
-"µµ¸ÞÀÎ ³×ÀÓ ¼­¹öÀÔ´Ï´Ù."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"³×Æ®¿÷ ÆÄÀÏ ½Ã½ºÅÛ(NFS), »ï¹Ù(SMB/·£ °ü¸®ÀÚ/À©µµ¿ìÁî), ±×¸®°í\n"
-"NCP(³Ý¿þ¾î)¸¦ ¸¶¿îÆ®ÇÏ°í ¾ð¸¶¿îÆ®ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"ºÎÆýÿ¡ ½ÃÀÛÇϵµ·Ï ¼³Á¤µÈ ¸ðµç ³×Æ®¿÷ ÀÎÅ×ÆäÀ̽º¸¦ \n"
-"È°¼ºÈ­/ºñÈ°¼ºÈ­ ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS´Â TCP/IP ³×Æ®¿÷À¸·Î ÆÄÀÏÀ» °øÀ¯ÇÏ´Â ÀαâÀÖ´Â ÇÁ·ÎÅäÄÝÀÔ´Ï´Ù.\n"
-"ÀÌ ¼­ºñ½º´Â /etc/export ÆÄÀÏÀ» ¼³Á¤ÇÔÀ¸·Î½á NFS ¼­¹öÀÇ ±â´ÉÀ» °¡´ÉÇÏ°Ô\n"
-"ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS´Â TCP/IP ³×Æ®¿÷À¸·Î ÆÄÀÏÀ» °øÀ¯ÇÏ´Â ÀαâÀÖ´Â ÇÁ·ÎÅäÄÝÀÔ´Ï´Ù.\n"
-"ÀÌ ¼­ºñ½º´Â NFS ÆÄÀÏ Àá±Ý ±â´ÉÀ» Á¦°øÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"ºÎÆýÿ¡ ÀÚµ¿À¸·Î Äְܼú X ȯ°æ¿¡¼­\n"
-"¼ýÀÚÅ° Àá±Ý ¸ðµå »ç¿ë."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "OKI 4w ¹× ȣȯ ÇÁ¸°ÅÍ Áö¿ø."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA´Â º¸Åë ·¦Å¾(³ëÆ®ºÏ)¿¡ ÀÖ´Â ÀÌ´õ³Ý Ä«µå¿Í ¸ðµ©°°Àº ÀåÄ¡\n"
-"µéÀ» Áö¿øÇϱâ À§ÇÑ °ÍÀÔ´Ï´Ù. Ãß°¡ ¼³Á¤ÀÌ ¾øÀ¸¸é ½ÃÀÛµÇÁö ¾Ê±â ¶§¹®¿¡,\n"
-"ÀÌ·¯ÇÑ ÀåÄ¡°¡ ¾ø´Â ÄÄÇ»ÅÍ¿¡ ¼³Ä¡µÇ¾î À־ ¾ÈÀüÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Æ÷Æ®¸ÊÆÛ(portmapper)´Â NFS¿Í NIS °°Àº ÇÁ·ÎÅäÄÝ¿¡ ÀÇÇØ »ç¿ëµÇ´Â\n"
-"RPC ¿¬°áÀ» °ü¸®ÇÕ´Ï´Ù. Æ÷Æ®¸Ê ¼­¹ö´Â RPC ¸ÞÄ¿´ÏÁòÀ» ÀÌ¿ëÇÏ´Â ÇÁ·ÎÅäÄÝ¿ë ¼­¹ö"
-"·Î\n"
-"»ç¿ëµÇ°í ÀÖ´Â ÄÄÇ»ÅÍ¿¡´Â ¹Ýµå½Ã ½ÇÇàµÇ°í ÀÖ¾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Æ÷½ºÆ®ÇȽº(Postfix)´Â ÄÄÇ»Åäµé°£¿¡ ¸ÞÀÏÀ» ÁÖ°í¹Þ´Â \n"
-"¸ÞÀÏ Àü¼Û ¿¡ÀÌÀüÆ®ÀÔ´Ï´Ù."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"°íÇ°ÁúÀÇ ³­¼ö »ý¼ºÀ» À§ÇØ ½Ã½ºÅÛ ¿£Æ®·ÎÇÇ Ç®À» ÀúÀåÇÏ°í \n"
-"º¹±¸ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"¿À¶óŬ °°Àº ÇÁ·Î±×·¥À» »ç¿ëÇϱâ À§ÇØ ³¯(RAW) ÀåÄ¡¸¦\n"
-"(Çϵåµð½ºÅ© ÆÄƼ¼Ç °°Àº) ºí·Ï ÀåÄ¡·Î ÇÒ´ç."
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed µ¥¸óÀº RIP ÇÁ·ÎÅäÄÝÀ» ÅëÇØ ÀÚµ¿À¸·Î IP ¶ó¿ìÅÍ Å×À̺íÀÌ °»½ÅµÇµµ·Ï ÇÕ´Ï"
-"´Ù.\n"
-"RIP´Â ¼Ò±Ô¸ð ³×Æ®¿÷À» À§ÇÑ °ÍÀ̱⠶§¹®¿¡, ´ë±Ô¸ð ³×Æ®¿÷À» À§Çؼ­´Â º¸´Ù º¹Àâ"
-"ÇÑ\n"
-"¶ó¿ìÆà ÇÁ·ÎÅäÄÝÀÌ ÇÊ¿äÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat ÇÁ·ÎÅäÄÝÀº ³×Æ®¿÷»óÀÇ »ç¿ëÀÚ°¡ ±¸ ³×Æ®¿ö»ó¿¡ ÀÖ´Â \n"
-"¸ðµç ÄÄÇ»ÅÍ¿¡ ´ëÇÏ¿© ¼öÇà´É·Â ¸ÞÆ®¸¯½º¸¦ ¾Ë¾Æ º¼ ¼ö ÀÖ°Ô ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers ÇÁ·ÎÅäÄÝÀº ³×Æ®¿÷»óÀÇ »ç¿ëÀÚµéÀÌ ´Ù¸¥ ÄÄÇ»ÅÍ»ó¿¡ ·Î±×ÀÎÇÑ \n"
-"»ç¿ëÀÚµéÀÇ ½Å¿øÀ» ¾Ë ¼ö ÀÖ°Ô ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho ÇÁ·ÎÅäÄÝÀº (finger¿Í ºñ½ÁÇÏ°Ô) rwho ´ë¸óÀÌ ½ÇÇàµÇ°í\n"
-"ÀÖ´Â ÄÄÇ»ÅÍ¿¡ ·Î±×ÀÎÇÑ »ç¿ëÀÚ ¸ñ·ÏÀ» ¿ø°Ý »ç¿ëÀÚ°¡ º¼ ¼ö ÀÖ°Ô ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "ÀÌ ÄÄÇ»ÅÍ¿¡¼­ »ç¿îµå ½Ã½ºÅÛ ½ÇÇà"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog´Â ¿©·¯ µ¥¸óµéÀÇ ·Î±× ¸Þ¼¼Áö¸¦ ¿©·¯ Á¾·ùÀÇ ½Ã½ºÅÛ ·Î±× ÆÄÀÏ·Î\n"
-"³²±â´Âµ¥ À¯¿ëÇÕ´Ï´Ù. Ç×»ó Syslog¸¦ ½ÇÇà½ÃÅ°´Â°ÍÀÌ ÁÁ½À´Ï´Ù."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "USB ÀåÄ¡¿ë µå¶óÀ̹ö ÀûÀç."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "X ÆùÆ® ¼­¹ö ½ÃÀÛ (X À©µµ¿ì¸¦ ¿î¿µÇϱâ À§Çؼ­´Â ÇʼöÀÔ´Ï´Ù)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "¾î¶² ¼­ºñ½º°¡ ºÎÆýÿ¡ ÀÚµ¿ ½ÇÇàµÇ¾î¾ß ÇÒÁö ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../services.pm_.c:126
-msgid "Printing"
-msgstr "Àμâ"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "ÀÎÅͳÝ"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr "ÆÄÀÏ °øÀ¯"
-
-#: ../../services.pm_.c:132
-msgid "System"
-msgstr "½Ã½ºÅÛ"
-
-#: ../../services.pm_.c:137
-msgid "Remote Administration"
-msgstr "¿ø°Ý °ü¸®"
-
-# ../../share/compssUsers
-#: ../../services.pm_.c:145
-msgid "Database Server"
-msgstr "µ¥ÀÌÅͺ£À̽º ¼­¹ö"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "¼­ºñ½º: µî·ÏµÈ %2$d Áß %1$d È°¼ºÈ­µÊ"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "¼­ºñ½º"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "½ÇÇàÁß"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "Á¤ÁöµÊ"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "¼­ºñ½º¿Í ´ë¸ó"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Á˼ÛÇÕ´Ï´Ù.\n"
-"ÀÌ ¼­ºñ½º¿¡ ´ëÇÑ Ãß°¡Á¤º¸°¡ ¾ø½À´Ï´Ù."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "ÀÚµ¿½ÇÇà"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "ÆÑÅ°Áö ¼³Ä¡ Áß..."
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"ÇÏµå µð½ºÅ©ÀÇ ÆÄƼ¼Ç Å×À̺íÀ» ÀÐÀ»¼ö ¾ø½À´Ï´Ù. ³Ê¹« º¯ÇüµÈ °Í °°½À´Ï´Ù. :(\n"
-"À߸øµÈ ÆÄƼ¼Ç ºñ¿ì±â¸¦ ½ÃµµÇÒ °ÍÀÔ´Ï´Ù."
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "¿À·ù!"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "ÇÊ¿äÇÑ À̹ÌÁö ÆÄÀÏ %s¸¦ ãÀ» ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "ÀÚµ¿ ¼³Ä¡ ¼³Á¤±â"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"ÀÌÁ¦ ÀÚµ¿ ¼³Ä¡ Ç÷ÎÇǸ¦ ¸¸µé °ÍÀÔ´Ï´Ù. ÀÌ°ÍÀº ´Ù¼Ò À§ÇèÇÑ ÀÛ¾÷ÀÌ µÉ ¼ö ÀÖÀ¸"
-"¸ç, ½ÅÁßÇÏ°Ô »ç¿ëµÇ¾îÁ®¾ß ÇÕ´Ï´Ù.\n"
-"\n"
-"ÀÌ°ÍÀÇ Æ¯Â¡Àº, ÀϺΠ°ªÀ» º¯°æÇϱâ À§ÇÏ¿© ÀϺΠ°úÁ¤¿¡¼­ ´ëÈ­¸ðµå°¡ ³ªÅ¸³ª±â´Â "
-"ÇÏÁö¸¸, ±âº»ÀûÀ¸·Î ÀÌ ÄÄÇ»ÅÍ¿¡¼­ ¼öÇàÇÑ ¼³Ä¡ÀÛ¾÷À» ÀÚµ¿¹Ýº¹ÇÏ°Ô ÇÕ´Ï´Ù.\n"
-"\n"
-"¾ÈÀü»óÀÇ ÀÌÀ¯·Î, ÀÌ ÄÄÇ»Åͻ󿡼­ÀÇ ¼³Ä¡°úÁ¤°ú´Â »ó°ü¾øÀÌ, ÆÄƼ¼Ç ³ª´©±â¿Í Æ÷"
-"¸ËÇϱâ´Â ÀÚµ¿À¸·Î ÀÌ·ç¾îÁöÁö ¾Ê½À´Ï´Ù.\n"
-"\n"
-"°è¼Ó ÁøÇàÇմϱî?"
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "ÀÚµ¿ °úÁ¤ ¼³Á¤±â"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr "°¢ °úÁ¤¿¡ ´ëÇÏ¿© ¼öµ¿¼³Ä¡¿Í ÀÚµ¿¹Ýº¹¼³Ä¡¸¦ ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "ÃàÇÏÇÕ´Ï´Ù!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Ç÷ÎÇÇ°¡ ¼º°øÀûÀ¸·Î »ý¼ºµÇ¾ú½À´Ï´Ù.\n"
-"ÀÌÁ¨ ¼³Ä¡°úÁ¤¸¦ ¹Ýº¹ÇÒ ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "ÀÎÅÍ³Ý ¿¬°á °øÀ¯"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "ÇöÀç ÀÎÅÍ³Ý ¿¬°á °øÀ¯°¡ °¡´ÉÇÑ »óÅÂÀÔ´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"ÀÎÅÍ³Ý ¿¬°á°øÀ¯ ¼³Á¤Àº ÀÌ¹Ì ¿Ï·áµÇ¾ú½À´Ï´Ù.\n"
-"ÇöÀç °¡´ÉÇÑ »óÅÂÀÔ´Ï´Ù.\n"
-"\n"
-"¹«½¼ ÀÛ¾÷À» ÇϽðڽÀ´Ï±î?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "ÇØÁ¦"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "Ãë¼Ò"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "Àç¼³Á¤"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "¼­¹ö ÁßÁö Áß..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "ÀÌÁ¦ ÀÎÅÍ³Ý ¿¬°á °øÀ¯°¡ ±ÝÁöµÇ¾ú½À´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "ÇöÀç ÀÎÅÍ³Ý ¿¬°á °øÀ¯°¡ ºÒ°¡´ÉÇÑ »óÅÂÀÔ´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"ÀÎÅÍ³Ý ¿¬°á°øÀ¯ ¼³Á¤Àº ÀÌ¹Ì ¿Ï·áµÇ¾ú½À´Ï´Ù.\n"
-"ÇöÀç ºÒ°¡´ÉÇÑ »óÅÂÀÔ´Ï´Ù.\n"
-"\n"
-"¹«½¼ ÀÛ¾÷À» ÇϽðڽÀ´Ï±î?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "Çã¿ë"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "¼­¹ö Çã¿ë Áß"
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "ÀÌÁ¦ ÀÎÅÍ³Ý ¿¬°á °øÀ¯°¡ Çã¿ëµÇ¾ú½À´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"ÀÌÁ¦ ÀÎÅÍ³Ý ¿¬°á °øÀ¯¸¦ À§Çؼ­ ´ÔÀÇ ÄÄÇ»Å͸¦ ¼³Á¤ÇÏ·Á°í ÇÕ´Ï´Ù.\n"
-"ÀÌ·ÎÀÎÇØ, Áö¿ª ³×Æ®¿÷ÀÇ ´Ù¸¥ ÄÄÇ»Å͵鵵 ÀÌ ÄÄÇ»ÅÍÀÇ ÀÎÅÍ³Ý ¿¬°áÀ» »ç¿ëÇÒ ¼ö "
-"ÀÖ°Ô µË´Ï´Ù.\n"
-"\n"
-"ÁÖÀÇ: Áö¿ª ³×Æ®¿÷(·£)À» ¸ñÀûÀ¸·Î ¼³Ä¡µÈ ³×Æ®¿÷ ¾î´ðÅÍ°¡ ÀÖ¾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "ÀÎÅÍÆäÀ̽º %s (%s ¸ðµâ »ç¿ë)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "ÀÎÅÍÆäÀ̽º %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "³×Æ®¿÷ ¾î´ðÅ͸¦ ãÀ» ¼ö ¾ø½À´Ï´Ù!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"¾î¶°ÇÑ ³×Æ®¿÷ ¾î´ðÅ͵µ ¹ß°ßµÇÁö ¾Ê½À´Ï´Ù. Çϵå¿þ¾î ¼³Á¤ µµ±¸¸¦ ½ÇÇàÇØ º¸¼¼¿ä."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "³×Æ®¿÷ ÀÎÅÍÆäÀ̽º"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"½Ã½ºÅÛ¿¡ ¿ÀÁ÷ ÇϳªÀÇ ¼³Á¤µÈ ³×Æ®¿÷ ¾î´ðÅÍ°¡ ÀÖ½À´Ï´Ù:\n"
-"\n"
-"%s\n"
-"\n"
-"±× ¾î´ðÅÍ·Î Áö¿ª ³×Æ®¿÷À» ¼³Á¤ÇÒ °ÍÀÔ´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "¾î´À ³×Æ®¿÷ ¾î´ðÅÍ°¡ Áö¿ª ³×Æ®¿÷À¸·Î ¿¬°áµÉ °ÍÀÎÁö ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr "°æ°í: ÀÌ¹Ì ¼³Á¤µÈ ³×Æ®¿÷ ÁÖ¼Ò°¡ ÀÖ½À´Ï´Ù. ´Ù½Ã ¼³Á¤ÇÒ °ÍÀÔ´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "ÇöÀç ¼³Á¤ %s¿¡¼­ ÀáÀçÀûÀÎ ·£ ÁÖ¼Ò Ãæµ¹ÀÌ ¹ß°ßµË´Ï´Ù!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "¹æÈ­º® ¼³Á¤ÀÌ °¨ÁöµÇ¾ú½À´Ï´Ù!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"°æ°í! ±âÁ¸ÀÇ ¹æÈ­º® ¼³Á¤ÀÌ °¨ÁöµÇ¾ú½À´Ï´Ù. ¼³Ä¡°¡ ³¡³­ ÈÄ¿¡ Á÷Á¢ ¼öÁ¤ÇÒ ÇÊ¿ä"
-"°¡ ÀÖ½À´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "¼³Á¤ Áß..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "½ºÅ©¸³Æ® ¼³Á¤ Áß, ¼ÒÇÁÆ®¿þ¾î ¼³Ä¡ Áß, ¼­¹ö ½ÃÀÛ Áß..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "ÆÑÅ°Áö ¼³Ä¡Áß ¹®Á¦ ¹ß»ý %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"¸ðµç °ÍÀÌ ¼³Á¤µÇ¾ú½À´Ï´Ù.\n"
-"ÀÌÁ¦ ÀÚµ¿ ³×Æ®¿÷ ¼³Á¤±â´É(DHCP)À¸·Î Áö¿ª ³×Æ®¿ö»óÀÇ ´Ù¸¥ ÄÄÇ»ÅÍ¿Í ÀÎÅÍ³Ý ¿¬"
-"°á °øÀ¯¸¦ ÇÒ ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "¼³Á¤Àº ÀÌ¹Ì ¿Ï·áµÇ¾úÁö¸¸, ÇöÀç ÇØÁ¦µÈ »óÅÂÀÔ´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "¼³Á¤ÀÌ ÀÌ¹Ì ¿Ï·áµÇ¾úÀ¸¸ç, ÇöÀç Çã¿ëµÈ »óÅÂÀÔ´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "¾î¶°ÇÑ ÀÎÅÍ³Ý ¿¬°á °øÀ¯µµ ¼³Á¤µÈ ÀûÀÌ ¾ø½À´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "ÀÎÅÍ³Ý ¿¬°á°øÀ¯ ¼³Á¤"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"ÀÎÅÍ³Ý ¿¬°á°øÀ¯ À¯Æ¿¸®Æ¼¿¡ Àß ¿À¼Ì½À´Ï´Ù!\n"
-"\n"
-"%s\n"
-"\n"
-"¸¶¹ý»ç¸¦ ½ÇÇàÇÏ·Á¸é ¡¸¼³Á¤¡¹À» ´©¸£¼¼¿ä."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "³×Æ®¿÷ ¼³Á¤ (%d ¾îµªÅÍ)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "ÇÁ·ÎÆÄÀÏ: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "ÇÁ·ÎÆÄÀÏ Áö¿ì±â"
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Áö¿ï ÇÁ·ÎÆÄÀÏ"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "»õ ÇÁ·ÎÆÄÀÏ..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"¸¸µé ÇÁ·ÎÆÄÀÏ À̸§ (»õ ÇÁ·ÎÆÄÀÏÀº ÇöÀç ÇÁ·ÎÆÄÀÏÀÇ »çº»À¸·Î¼­ ¸¸µé¾î Áý´Ï´Ù.):"
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "È£½ºÆ®¸í:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "ÀÎÅÍ³Ý ¾×¼¼½º"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "À¯Çü: "
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "°ÔÀÌÆ®¿þÀÌ:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "ÀÎÅÍÆäÀ̽º:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "»óÅÂ:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "¿¬°áµÊ"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "¿¬°á ¾ÈµÊ"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "¿¬°á..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "¿¬°á ²÷±â..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "¿¬°á Áß..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "¿¬°á ²÷´Â Áß..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"¿¬°á ²÷¾îÁ® ÀÖÁö ¾Ê½À´Ï´Ù.\n"
-"·çÆ® »ç¿ëÀÚÀÇ ±ÇÇÑÀ¸·Î Á÷Á¢\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"À» ½ÇÇàÇϼ¼¿ä."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "ÀÌÁ¦ ½Ã½ºÅÛÀÇ ¿¬°áÀÌ ²÷¾îÁø »óÅÂÀÔ´Ï´Ù."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "ÀÎÅÍ³Ý Á¢±Ù ¼³Á¤..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "LAN ¼³Á¤"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "µå¶óÀ̹ö"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "ÀÎÅÍÆäÀ̽º"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "ÇÁ·ÎÅäÄÝ"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "»óÅÂ:"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Áö¿ª ³×Æ®¿÷ ¼³Á¤..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr "¸¶¹ý»ç¸¦ ½ÇÇàÇÏ·Á¸é ¿©±â¸¦ ´©¸£¼¼¿ä. ->"
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Àû¿ë"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "±â´Ù·Á ÁÖ¼¼¿ä... ¼³Á¤À» Àû¿ëÇÏ°í ÀÖ½À´Ï´Ù."
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"¼³Á¤µÈ ÀÎÅÍÆäÀ̽º°¡ ¾ø½À´Ï´Ù.\n"
-"¡¸¼³Á¤¡¹À» ´­·¯ ÀÎÅÍÆäÀ̽º¸¦ ¸ÕÀú ¼³Á¤Çϼ¼¿ä."
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "LAN ¼³Á¤"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "¾î´ðÅÍ %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "ºÎÆ® ÇÁ·ÎÅäÄÝ"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "ºÎÆýà ½ÃÀÛµÊ"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP Ŭ¶óÀ̾ðÆ®"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "Áö±Ý È°¼ºÈ­"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "Áö±Ý ºñÈ°¼ºÈ­"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"ÀÎÅÍ³Ý ¿¬°áÀÌ ¾ø½À´Ï´Ù.\n"
-"¡¸¼³Á¤¡¹À» ´­·¯ ¸ÕÀú ¿¬°áÀ» ¼³Á¤Çϼ¼¿ä."
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "ÀÎÅÍ³Ý ¿¬°á ¼³Á¤"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "ÀÎÅÍ³Ý ¿¬°á ¼³Á¤"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "¿¬°á À¯Çü: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "ÀÎÀÚ"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "ÀÌ´õ³Ý Ä«µå"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP Ŭ¶óÀ̾ðÆ®"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "º¸¾È¿¡ ½Å°æ¾È¾¸"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "ÃÖÀú"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "ÃÖ°í"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"ÀÌ µî±ÞÀ» »ç¿ëÇÒ·Á¸é ¸Å¿ì ÁÖÀÇÇÏ¿©¾ß ÇÕ´Ï´Ù. ½Ã½ºÅÛÀ» »ç¿ëÇϱ⿡´Â \n"
-"¿ëÀÌÇÏ°ÚÁö¸¸ ¸Å¿ì ¹Î°¨ÇÏ°Ô ÀÛµ¿ÇÕ´Ï´Ù: ÀÎÅͳÝÀ̳ª ³×Æ®¿÷¿¡ ¿¬°áµÈ ½Ã½ºÅÛ¿ë\n"
-"À¸·Î´Â »ç¿ëÇÏÁö ¸¶¼¼¿ä. ¾ÏÈ£±â´ÉÀÌ ¾ø½À´Ï´Ù."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"¾ÏÈ£±â´ÉÀÌ Àû¿ëµÇÁö¸¸, ³×Æ®¿÷¿¡ ¿¬°áµÈ ÄÄÇ»ÅÍ·Î »ç¿ëÇϱ⿡´Â ¾ÆÁ÷ ÀûÀýÇÏÁö ¾Ê"
-"½À´Ï´Ù."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"ÀÌ µî±ÞÀº º¸¾È»óÀÇ °³¼±»çÇ×ÀÌ º°·Î ¾ø½À´Ï´Ù. ¸¹Àº º¸¾È °æ°í¿Í Á¡°ËÀÌ\n"
-"³ªÅ¸³³´Ï´Ù."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"ÀÌ µî±ÞÀº Ŭ¶óÀ̾ðÆ®·Î¼­ ÀÎÅͳݿ¡ Á¢¼ÓÇϴµ¥ Àû´çÇÑ Ç¥ÁØ º¸¾Èµî±ÞÀÔ´Ï´Ù.\n"
-"ÀÌ µî±ÞºÎÅÍ ÀûÁ¤ÇÑ ½Ã½ºÅÛ º¸¾È Á¡°Ë±â´ÉÀÌ ÀÖ½À´Ï´Ù. "
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"ÀÌ º¸¾Èµî±ÞÀ¸·Î ÀÌ ½Ã½ºÅÛÀ» ¼­¹ö·Î ¿î¿ëÇÒ ¼ö ÀÖ°Ô µË´Ï´Ù.\n"
-"ÀÌ º¸¾Èµî±ÞÀº ¿ÜºÎÀÇ Å¬¶óÀ̾ðÆ®µéÀÇ Á¢¼ÓÀ» ¹Þ¾ÆµéÀ̴µ¥ À־ \n"
-"ÃæºÐÈ÷ ³ôÀº º¸¾Èµî±ÞÀÔ´Ï´Ù. "
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"º¸¾È 4 µî±ÞÀÌ Àû¿ëµË´Ï´Ù. ½Ã½ºÅÛÀÌ ¿ÏÀüÈ÷ ¿ÜºÎÁ¢±Ù¿¡¼­ °Ý¸®µË´Ï´Ù.\n"
-"ÃÖ°í º¸¾È ¼öÁØÀÔ´Ï´Ù."
-
-#: ../../standalone/draksec_.c:65
-msgid "Security level"
-msgstr "º¸¾È ¼öÁØ"
-
-#: ../../standalone/draksec_.c:67
-msgid "Use libsafe for servers"
-msgstr "¼­¹ö¿¡ ´ëÇØ libsafe »ç¿ë"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "¹öÆÛ ³ÑħÀ̳ª Çü½ÄÈ­ ¹®ÀÚ¿­ °ø°ÝÀ» ¸·´Â ¶óÀ̺귯¸®."
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "º¸¾È ¼öÁØ ¼³Á¤"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "ÄÁÆ®·Ñ ¼¾ÅÍ"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "»ç¿ëÇÒ µµ±¸¸¦ ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "»ç¿ë¹ý: keyboarddrake [--expert] [Å°º¸µå]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Äֿܼ¡¼­ ¹é½ºÆäÀ̽º Å°°¡ Áö¿ì±â¸¦ Çϵµ·Ï ÇϽðڽÀ´Ï±î?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "CDROM ¹Ù²Ù±â"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"¼³Ä¡ CD-ROMÀ» ³ÖÀº ÈÄ¿¡ ¡¸È®ÀΡ¹À» ´©¸£¼¼¿ä.\n"
-"CD-ROMÀÌ ¾ø´Ù¸é, ¡¸Ãë¼Ò¡¹¸¦ ¶óÀÌºê ¾÷±×·¹À̵带 Ãë¼ÒÇϼ¼¿ä."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "¶óÀÌºê ¾÷±×·¹À̵带 ½ÃÀÛÇÒ ¼ö ¾ø½À´Ï´Ù!!! \n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "¹ß°ßµÈ ½Ã¸®¾ó_USB°¡ ¾ø½À´Ï´Ù.\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "3¹öÆ° ¿¡¹Ä·¹ÀÌÆ®?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "¹æÈ­º® ¼³Á¤"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "¹æÈ­º® ¼³Á¤"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"¹æÈ­º®\n"
-"\n"
-"¹æÈ­º®Àº ÀÌ¹Ì ¼³Á¤µÇ¾î ÀÖ½À´Ï´Ù.\n"
-"¹æÈ­º®À» º¯°æ ¶Ç´Â Á¦°ÅÇÏ·Á¸é, ¡¸¼³Á¤¡¹À» ´©¸£¼¼¿ä."
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"¹æÈ­º®\n"
-"\n"
-"Ç¥ÁØ ¹æÈ­º®À» ¼³Á¤ÇÏ·Á¸é, ¡¸¼³Á¤¡¹À» ´©¸£¼¼¿ä."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "¾ð¾î ¼±ÅÃ"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "¼³Ä¡ Ŭ·¡½º ¼±ÅÃ"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "ÇÏµå µð½ºÅ© ¼±ÅÃ"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "¸¶¿ì½º ¼³Á¤"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Å°º¸µå ¼±ÅÃ"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "º¸¾È"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "ÆÄÀϽýºÅÛ Áغñ"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "ÆÄƼ¼Ç Æ÷¸Ë"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "¼³Ä¡ ÆÑÅ°Áö ¼±ÅÃ"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "½Ã½ºÅÛ ¼³Ä¡"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "»ç¿ëÀÚ Ãß°¡"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "³×Æ®¿÷ ¼³Á¤"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "¼­ºñ½º ¼³Á¤"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "ºÎÆ®µð½ºÅ© Á¦ÀÛ"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "ºÎÆ®·Î´õ ¼³Ä¡"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X ¼³Á¤"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "¼³Ä¡ Á¾·á"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"TinyFirewall ¼³Á¤\n"
-"\n"
-"ÀÌ°ÍÀº ¸®´ª½º ¸Çµå·¹ÀÌÅ© ½Ã½ºÅÛÀÇ °³ÀÎ ¹æÈ­º®À» ¼³Á¤ÇÕ´Ï´Ù.\n"
-"°­·ÂÇÑ Àü¹® ¹æÈ­º®À» »ç¿ëÇÏ°í ½Í´Ù¸é, ¸Çµå·¹ÀÌÅ© º¸¾È ¹æÈ­º®\n"
-"¹èÆ÷ÆÇÀ» ±¸ÇϽñ⠹ٶø´Ï´Ù."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"ÀÌÁ¦ ÀÎÅͳÝÀ¸·ÎºÎÅÍ Á¢¼ÓÇÒ ¼ö ÀÖ´Â ¼­ºñ½º¿¡ °üÇÑ Áú¹®À» ÇÒ °ÍÀÔ´Ï´Ù.\n"
-"ÄÄÇ»ÅÍÀÇ º¸¾È»ó Áß¿äÇϹǷΠ°¢ Áú¹®¿¡ ÁÖÀÇÇؼ­ ÀÀÇϽñ⠹ٶø´Ï´Ù.\n"
-"\n"
-"¼­ºñ½º Áß¿¡ »ç¿ëÇÏÁö ¾Ê´Â °ÍÀÌ ÀÖ´Ù¸é, ¹æÈ­º®À¸·Î ¸·½À´Ï´Ù.\n"
-"ÀÌ ¼³Á¤Àº ¾ðÁ¦¶óµµ ÀÌ ÇÁ·Î±×·¥À» ´Ù½Ã ½ÇÇàÇÔÀ¸·Î½á \n"
-"º¯°æÇÒ ¼ö ÀÖ½À´Ï´Ù!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"ÀÎÅ׳ÝÀÇ ¾îµð¼­¶óµµ Á¢¼ÓÇÒ ¼ö ÀÖ´Â À¥¼­¹ö¸¦ ¿î¿ëÇմϱî?\n"
-"¸¸¾à ¿ÀÁ÷ ÀÌ ÄÄÇ»ÅÍ¿¡¼­¸¸ Á¢¼ÓÇÒ ¼ö ÀÖ´Â À¥¼­¹ö¸¦ ¿î¿ëÇÑ´Ù¸é,\n"
-"¾ÈÀüÇÏ°Ô ¡¸¾Æ´Ï¿À¡¹¸¦ ´©¸£¼¼¿ä.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"³×ÀÓ ¼­¹ö¸¦ ¿î¿ëÇմϱî?\n"
-"¸¸¾à IP¿Í Áö¿ª Á¤º¸¸¦ Àüü ÀÎÅͳÝÀ¸·Î º¸³»µµ·Ï ¼³Á¤ÇÏÁö ¾Ê¾Ò´Ù¸é,\n"
-"¡¸¾Æ´Ï¿À¡¹¸¦ ´©¸£¼¼¿ä.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"º¸¾È ½©(SSH) Á¢¼ÓÀ» Çã¿ëÇϽðڽÀ´Ï±î?\n"
-"ÀÌ°ÍÀº ¿ÜºÎ¿¡¼­ ·Î±×ÀÎÇϱâÀ§ÇØ »ç¿ëµÇ´Â ÅÚ³Ý ´ë¿ë ÇÁ·Î±×·¥\n"
-"ÀÔ´Ï´Ù. ¾ÆÁ÷µµ ÅÚ³ÝÀ» »ç¿ëÇÏ°í ÀÖ´Ù¸é, SSH·Î ¹Ù²Ù¼¼¿ä.\n"
-"ÅÚ³ÝÀº ¾Ïȣȭ°¡ µÇ¾î ÀÖÁö ¾Ê±â ¶§¹®¿¡, ´ÔÀÌ ÅÚ³ÝÀ» »ç¿ëÇÒ ¶§,\n"
-"¿ÜºÎ °ø°ÝÀÚ°¡ ¾ÏÈ£¸¦ ÈÉÄ¥ ¼ö ÀÖ½À´Ï´Ù. SSH´Â ¾Ïȣȭ¸¦ »ç¿ëÇϱâ\n"
-"¶§¹®¿¡ ÀÌ·± µµÃ»À¸·ÎºÎÅÍ ¾ÈÀüÇÕ´Ï´Ù."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"¿ÜºÎ ÅÚ³Ý Á¢¼ÓÀ» Çã¿ëÇϽðڽÀ´Ï±î?\n"
-"ÀÌÀü È­¸é¿¡¼­ ¼³¸íÇßµíÀÌ, ÀÌ°ÍÀº Á¤¸» À§ÇèÇÑ °ÍÀÔ´Ï´Ù.\n"
-"¡¸¾Æ´Ï¿À¡¹¸¦ ´©¸£°í SSH¸¦ »ç¿ëÇÒ °ÍÀ» °­·ÂÈ÷\n"
-"±ÇÀåÇÕ´Ï´Ù.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"ÀÎÅͳݿ¡¼­ Á¢¼ÓÇÒ ¼ö ÀÖ´Â FTP ¼­¹ö¸¦ ¿î¿ëÇմϱî?\n"
-"¸¸¾à ±×·¯ÇÏ´Ù¸é, À͸í Á¢¼Ó¸¸À» Çã¿ëÇÒ °ÍÀ» °­·ÂÈ÷\n"
-"±ÇÀåÇÕ´Ï´Ù. FTPµµ ¶ÇÇÑ ¾Ïȣȭ¸¦ »ç¿ëÇÏÁö ¾Ê±â ¶§¹®¿¡\n"
-"FTP·Î Àü¼ÛµÇ´Â ¾î¶°ÇÑ ¾ÏÈ£µµ °ø°ÝÀÚ¿¡°Ô ³ëÃâµÉ ¼ö ÀÖ½À´Ï´Ù.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"¸ÞÀÏ ¼­¹ö¸¦ ¿î¿ëÇմϱî?\n"
-"¸¸¾à pine, mutt ¶Ç´Â ±× ¿ÜÀÇ ÅؽºÆ® ±â¹Ý ¸ÞÀÏ ÇÁ·Î±×·¥À» »ç¿ëÇÑ´Ù¸é, \n"
-"ÇÊ¿äÇÕ´Ï´Ù. ±×·¸Áö ¾Ê´Ù¸é ¹æÈ­º®À¸·Î ¸·À¸¼¼¿ä.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"POP ¶Ç´Â IMAP ¼­¹ö¸¦ ¿î¿ëÇմϱî?\n"
-"ÀÌ°ÍÀº »ç¿ëÀڵ鿡°Ô À¥ ±â¹ÝÀÌ ¾Æ´Ñ ¹æ¹ýÀ¸·Î ¸ÞÀÏ °èÁ¤À» \n"
-"¼­ºñ½ºÇÒ ¶§ »ç¿ëµË´Ï´Ù.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"2.2 Ä¿³ÎÀ» »ç¿ëÇÏ°í ÀÖ´Â µí ÇÕ´Ï´Ù. ³×Æ®¿÷ IP°¡ Áý ¶Ç´Â »ç¹«½Ç\n"
-"µîÀÇ ´Ù¸¥ ÄÄÇ»³Ê¿¡ ÀÇÇØ ÀÚµ¿ ÇÒ´çµÈ´Ù¸é(À¯µ¿ IP),\n"
-"ÀÌ°ÍÀÌ ÇÊ¿äÇÕ´Ï´Ù.\n"
-"ÀÌ¿Í °°Àº ȯ°æ¿¡ ÀÖ½À´Ï±î?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"ÀÌ ÄÄÇ»ÅÍÀÇ ½Ã°£ÀÌ ´Ù¸¥ ÄÄÇ»ÅÍ¿¡ ÀÇÇØ µ¿±âÈ­ µË´Ï±î?\n"
-"´ë°³ ÀÌ°ÍÀº Áß±Þ À¯´Ð½º/¸®´ª½º Áý´Ü¿¡¼­ ·Î±× ±â·Ï ¶Ç´Â\n"
-"±× ¿ÜÀÇ ¿ëµµ·Î¸¦ À§ÇØ »ç¿ëµË´Ï´Ù. ÀÌ ÄÄÇ»ÅÍ°¡ ´ë±Ô¸ð\n"
-"»ç¹«½Ç ³×Æ®¿÷¿¡ Âü¿©ÇÏ°í ÀÖÁö ¾Ê°Å³ª, ÀÌ°Í¿¡ ´ëÇØ Ã³À½\n"
-" µé¾î º»´Ù¸é, ¾Æ¸¶ ÇÊ¿äÇÏÁö ¾ÊÀ» °ÍÀÔ´Ï´Ù."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"¼³Á¤ ¿Ï·á. º¯°æ »çÇ×À» µð½ºÅ©¿¡ ÀúÀåÇÒ±î¿ä?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "%s¸¦ ¿­ ¼ö ¾ø½À´Ï´Ù: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "%s¸¦ ¾²±â ¸ðµå·Î ¿­ ¼ö ¾ø½À´Ï´Ù: %s\n"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "À¥/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "³×Æ®¿÷ ÄÄÇ»ÅÍ (Ŭ¶óÀ̾ðÆ®)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS ¼­¹ö, »ï¹Ù ¼­¹ö, ÇÁ¶ô½Ã ¼­¹ö, SSH ¼­¹ö"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "¿ÀÇǽº"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "GNOME ¿öÅ©½ºÅ×À̼Ç"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Palm pilot ¶Ç´Â Visor¿ë µµ±¸µé"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "¿öÅ©½ºÅ×À̼Ç"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "¹æÈ­º®/¶ó¿ìÅÍ"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "µµ¸ÞÀÎ ³×ÀÓ ¹× ³×Æ®¿÷ Á¤º¸ ¼­¹ö"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"¿ÀÇǽº ÇÁ·Î±×·¥µé: ¿öµåÇÁ·Î¼¼¼­ (kword, abiword), ½ºÇÁ·¹µå½¬Æ® (kspread,"
-"gnumeric), pdf ºä¾î, µîµî"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "¿Àµð¿À °ü·Ã µµ±¸; mp3/midi Ç÷¹À̾î, ¹Í¼­, µîµî"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "¸®´ª½º ¹× ÀÚÀ¯ ¼ÒÇÁÆ®¿þ¾î¿¡ ´ëÇÑ ¼­Àû°ú Howto¹®¼­"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE ¿öÅ©½ºÅ×À̼Ç"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, À©µµ¿ì ¸ÞÀÌÄ¿, ÀζóÀÌÆ°¸ÕÆ®, Fvwm, µîµî"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "¸ÖƼ¹Ìµð¾î - ºñµð¿À"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "¸ÞÀÏ, ´º½º, À¥, ÆÄÀÏÀü¼Û, äÆÃ¿ë µµ±¸¸ðÀ½"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "µ¥ÀÌÅͺ£À̽º"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL ¶Ç´Â MySQL µ¥ÀÌÅͺ£À̽º ¼­¹ö"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "½¬¿î ÄÄÇ»ÅÍ ¼³Á¤À» À§ÇÑ µµ±¸"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "¸ÖƼ¹Ìµð¾î - »ç¿îµå"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "À¯Æ¿·¯Æ¼"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "¹®¼­"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "ÄÜ¼Ö µµ±¸"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "postfix ¸ÞÀÏ ¼­¹ö, Inn ´º½º ¼­¹ö"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "ÀÎÅÍ³Ý ½ºÅ×À̼Ç"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "¸ÖƼ¹Ìµð¾î ½ºÅ×À̼Ç"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "¼³Á¤"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Ãß°¡ ±×·¡ÇÈ µ¥½ºÅ©Å¾ (Gnome, IceWM)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "K Desktop ȯ°æ, ¿©·¯°¡Áö µµ±¸¸¦ ¼ö¹ÝÇÑ ±âº» ±×·¡ÇÈ È¯°æ"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "±×·¡ÇÈ È¯°æ"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "°³¹ß"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "¾ÆÆÄÄ¡¿Í ÇÁ·ÎFTPD"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "CD Á¦ÀÛ ¹× ±Á±â µµ±¸"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "¿ÀÇǽº ¿öÅ©½ºÅ×À̼Ç"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "±×³ð, Icewm, À©µµ¿ì ¸ÞÀÌÄ¿, ÀζóÀÌÆ°¸ÕÆ®, Fvwm, µîµî"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "GIMP °°Àº ±×·¡ÇÈ ÇÁ·Î±×·¥"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C/C++ °³¹ß ¶óÀ̺귯¸®, ÇÁ·Î±×·¥ ¹× Çì´õÆÄÀÏ"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "³×Æ®¿÷ ÄÄÇ»ÅÍ ¼­¹ö"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "¸ÞÀÏ/±×·ì¿þ¾î/´º½º"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "°ÔÀÓ ½ºÅ×À̼Ç"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "ºñµð¿À Ç÷¹ÀÌ¾î ¹× ¿¡µðÅÍ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "¸ÖƼ¹Ìµð¾î - ±×·¡ÇÈ"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Àå³­°¨ ÇÁ·Î±×·¥: arcade, boards, strategy, µîµî"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr "¸ÞÀÏ/´º½º¸¦ ÀÏ°í º¸³»¸ç À¥°Ë»öÀ» À§ÇÑ µµ±¸¸ðÀ½(pine, mutt, tin...)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "¾ÆÄ«À̺ù, ¿¡¹Ä·¹ÀÌÅÍ, ¸ð´ÏÅ͸µ"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "°³ÀÎ ±ÝÀ¶"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "»ç¿ëÀÚ Ä£È­Àû ÇÁ·Î±×·¥°ú µ¥½ºÅ©Å¾ µµ±¸¸¦ °¡Áø ±×·¡ÇÈ È¯°æ"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "SSH ¹× ´Ù¸¥ ÇÁ·ÎÅäÄÝÀÇ Å¬¶óÀ̾ðÆ®"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "ÀÎÅÍ³Ý °ÔÀÌÆ®¿þÀÌ"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "»ç¿îµå ¹× ºñµð¿À ¿¬ÁÖ/ÆíÁý ÇÁ·Î±×·¥"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "±âŸ ±×·¡ÇÈ µ¥½ºÅ©Å¾"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "¿¡µðÅÍ, ½©, ÆÄÀϵµ±¸, Å͹̳Î"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "gnucash °°Àº Àڱݰü¸® ÇÁ·Î±×·¥"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "°ÔÀÓ"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "°³ÀÎ Á¤º¸°ü¸®"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "¸ÖƼ¹Ìµð¾î - CD ±Á±â"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "°úÇÐ ¿öÅ©½ºÅ×À̼Ç"
diff --git a/perl-install/share/po/lt.po b/perl-install/share/po/lt.po
deleted file mode 100644
index 8034d839a..000000000
--- a/perl-install/share/po/lt.po
+++ /dev/null
@@ -1,11184 +0,0 @@
-# Lithuanian transaltion of DrakX
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Kæstutis Kruþikas <DrKestas@takas.lt>, 1999
-# Mykolas Norvaiðas <Myka@centras.lt>, 1999-2001
-# Gediminas Paulauskas <menesis@delfi.lt>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX \n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-03-04 23:55+0200\n"
-"Last-Translator: Mykolas Norvaiðas <Myka@centras.lt>\n"
-"Language-Team: Lithuanian <komp_lt@konferencijos.lt>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-13\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:232
-#, fuzzy
-msgid "Use Xinerama extension"
-msgstr "Naudokite automatiná aptikimà"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:238
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "skaitomi nustatymai"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Vaizdo plokðtë"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Pasirink vaizdo plokðtæ"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Pasirink X serverá"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X serveris"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Kurià XFree konfigûracijà tu nori turëti?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Tavo plokðtë palaiko 3D árenginio akseleracijà, bet tik su XFree %s.\n"
-"Tavo plokðtë dirba su XFree %s, kuris galbût geriau palaiko 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Tavo plokðtë palaiko 3D akseleracijà su XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s su 3D árenginio akseleracija"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Jûsø korta palaiko 3D akseleracija su XFree %s.ATMINKITE, KAD TAI YRA "
-"EKSPERIMENTINIS PALIKYMAS IR GALI PAKABINTI KOMPIUTERÁ."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s su EKSPERIMENTINE 3D árenginio akseleracija"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Jûsø korta palaiko 3D árenginio akseleracija tik su XFree %s,\n"
-"ATMINKITE, KAD TAI YRA EKSPERIMENTINIS PALIKYMAS IR GALI PAKABINTI "
-"KOMPIUTERÁ.\n"
-"Jûsø korta dirba su XFree %s kuris galbût geriau palaiko 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree konfigûravimas"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Pasirink savo vaizdo plokðtës atminties dydá"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Pasirink serverio nuostatas"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Pasirink monitoriø"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitorius"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Du svarbiausi dydþiai yra vertikalaus atnaujinimo daþnis, kuris rodo,\n"
-"kaip daþnai perpieðiamas visas ekranas, ir horizontaliosios skleistinës "
-"daþnis, kuris parodo, kaip greit perpieðiamos eilutës.\n"
-"\n"
-"Tai LABAI SVARBU, kad nenurodytum skleistinës daþnio, didesnio\n"
-"uþ palaikomà monitoriaus, nes gali já sugadinti. Jeigu abejoji,\n"
-"pasirink konservatyvià nuostatà."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Horizontalaus atnaujinimo daþnis"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Vertikalaus atnaujinimo daþnis"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Monitorius nenurodytas"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Vaizdo plokðtë dar nenurodyta"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Dar nepasirinkta skiriamoji geba"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Ar tu nori iðbandyti nustatymus?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Perspëjimas: ðios plokðtës bandymas gali pakabinti kompiuterá"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Nustatymø tikrinimas"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"pabandyk pakeisti kai kuriuos parametrus"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Ávyko klaida:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Baigiu per %d sekundþiø (-es)"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Ar toks nustatymas tave tenkina?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ávyko klaida, bandyk pakeisti kai kuriuos parametrus"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Skiriamoji geba"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Pasirink skiriamàjà gebà ir spalvø gylá"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Vaizdo plokðtë: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 serveris: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Eksperto Reþimas"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Rodyti viskà"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Skiriamosios gebos"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klaviatûros iðdëstymas: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Pelës tipas: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Pelës árenginys: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitorius: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitoriaus horiz. skleistinë: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitoriaus vert. skleistinë: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Vaizdo plokðtë: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Vaizdo plokðtë: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Vaizdo atmintis: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Spalvø gylis: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Skiriamoji geba: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 serveris: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 tvarkyklë: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Ruoðiami X-Window nustatymai"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Kà tu nori daryti?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Pakeisti monitoriø"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Pakeisti vaizdo plokðtæ"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Pakeisti serverio nustatymus"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Pakeisti skiriamàjà gebà"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Rodyti informacijà"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Patikrinti vël"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Iðeiti"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Iðlaikyti pakeitimus?\n"
-"Esama konfigûracija yra:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Praðom ið naujo paleisti %s, kad pakeitimai bûtø aktyvuoti"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Praðom atsisveikinti ir paskui paspausti Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X paleidþiant"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Tu gali nustatyti, kad X startuotø automatiðkai.\n"
-"Ar tu nori, kad X startuotø po kompiuterio perkrovimo?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 spalvos (8 bitai)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tûkst. spalvø (15 bitø)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tûkst. spalvø (16 bitø)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milijonai spalvø (24 bitai)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijardai spalvø (32 bitai)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB ar daugiau"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standartinis VGA 640x480 prie 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA 800x600 prie 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Suderinamas su 8514, 1024x768 prie 87 Hz interlaced (nëra 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 prie 87 Hz interlaced, 800x600 prie 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Iðplëstas Super VGA, 800x600 prie 60 Hz, 640x480 prie 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 prie 60 Hz, 800x600 prie 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Aukðto daþnio SVGA, 1024x768 prie 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Daugiadaþnis, galintis 1280x1024 prie 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Daugiadaþnis, galintis 1280x1024 prie 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Daugiadaþnis, galintis 1280 prie 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitorius, galintis 1600x1200 prie 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitorius, galintis 1600x1200 prie 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Pirmasis ákrovos skirsnio sektorius"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Pirmasis kaupiklio sektorius (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILO Ádiegimas"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Kur nori ádiegti ákrovos tvarkyklæ?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "LILO/GRUB ádiegimas"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO su tekstiniu meniu"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO su grafiniu meniu"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Ákrova su DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Ákrovos tvarkyklës pagrindinës parinktys"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Naudojama ákrovos tvarkyklë"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Ákrovos tvarkyklës ádiegimas"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Ákrovos árenginys"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nedirba su senais BIOS'ais)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Kompaktiðkas"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "kompaktiðkas"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Vaizdo reþimas"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Palaukti prieð ákraunant áprastà atvaizdà"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Slaptaþodis"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Slaptaþodis (vël)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Grieþtos komandinës eilutës parinktys"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "grieþta"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Iðvalyti /tmp kiekvienà kartà ákrovus"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Tikslus RAM atminties dydis (rasta %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Leisti keletà profiliø"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Nurodyk RAM atminties dydá (MB)"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Parinktis ¥Grieþtos komandinës eilutës parinktys´ yra nenaudingà be "
-"slaptaþodþio"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Praðom bandyti vël"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Slaptaþodþiai nesutampa"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:185
-#, fuzzy
-msgid "Default OS?"
-msgstr "Áprastas"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Èia yra skirtingi áraðai.\n"
-"Tu gali pakeisti esamus arba prijungti naujus."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Pridëti"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Atlikta"
-
-#: ../../any.pm_.c:217
-#, fuzzy
-msgid "Modify"
-msgstr "Taisyti RAID"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Kokio tipo áraðà tu nori pridëti?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Kitos OS (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Kitos OS (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Kitos OS (Windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Atvaizdas"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Ðakninis"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Pridurti"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Skaitymui-raðymui"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Lentelë"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Nesaugus"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Þymë"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Áprastas"
-
-#: ../../any.pm_.c:278
-#, fuzzy
-msgid "Initrd-size"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Iðmesti áraðà"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Tuðèia þymë neleidþiama"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Ði þymë jau naudojama"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Rasti %s %s interfeisai"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Ar turi dar vienà?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Ar tu turi koká nors %s interfeisà?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Taip"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Paþiûrëk árangos informacijà"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Ádiegiama tvarkyklë %s plokðtei %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(modulis %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kokià %s tvarkyklæ turëèiau iðbandyti?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Kartais %s tvarkyklei reikia papildomos informacijos, kad dirbtø gerai,\n"
-"nors normaliai turi veikti ir be jos. Ar tu nori jai nurodyti papildomas\n"
-"parinktis, ar leisi pabandyti nusistatyti paèiai. Bandymas gali\n"
-"pakabinti kompiuterá, bet tai neturëtø padaryti þalos."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Automatinis bandymas"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Nurodyti parinktis"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Dabar tu gali nurodyti parinktis moduliui %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Dabar tu gali nustatyti %s modulio nustatymus.\n"
-"Opcijø formatas yra toks : ''vardas=reikðmë vardas2=reikðmë2 ...''.\n"
-"Pvz, ''io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Modulio parinktys:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Modulio %s iðkvietimas nepavyko.\n"
-"Ar nori bandyti su kitais nustatymais?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s jau pridëtas)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Ðis slaptaþodis pernelyg paprastas"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Praðom suteikti vartotojo vardà"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Vartotojo vardas turi susidaryti tik ið maþøjø raidþiø, skaièiø ir simboliø "
-"`-' bei `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Ðis vartotojo vardas jau pridëtas"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Pridëti vartotojà"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Ávesk vartotojà\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Priimti vartotojà"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Tikras vardas"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Vartotojo vardas"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Automatinis pasisveikinimas"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Að galiu nustatyti taip, kad vienas vartotojas pasisveikintø automatiðkai.\n"
-"Jei nenori to naudoti, spausk mygtukà Nutraukti."
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Pasirink áprastà vartotojà:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Pasirink, kurià langø tvarkyklæ naudosi:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Praðom pasirinkti kalbà, kurià naudosi."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "Tu gali pasirinkti kitas kalbas, kurios bus prieinamos po ádiegimo"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Visos"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Sveiki, besinaudojantys %s, operaciju sistemu parinkikliu!\n"
-"\n"
-"Pasirink operaciju sistema is zemiau esancio saraso,\n"
-"arba palauk %d sekundziu, kad butu ikrauta pagal nutylejima\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Sveiki, besinaudojantys GRUB, operaciniu sistemu parinkikliu!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Naudok %c ir %c klavisus, kad pasirinktum, kuris irasas pazymetas"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Spausk enter, noredami ikrauti pasirinkta OS, 'e', noredami keisti"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandas pries ikrova, arba 'c', komandinei eilutei iskviesti "
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Pasirinktas irasas bus ikrautas automatiskai po %d sekundziu."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "nepakanka vietos /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Darbastalis"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Paleidimo meniu"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Kur nori ádiegti ákrovos tvarkyklæ?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pagalba dar nesukurta.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Ádiegimo Tipo Konfiguracija"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/Bylos"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Byla/Iðeiti"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Monitorius"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Pakeisti monitoriø"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Ákrovos metu paleisti Aurora"
-
-#: ../../bootlook.pm_.c:100
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Skambinimo reþimas"
-
-#: ../../bootlook.pm_.c:102
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Interneto jungties dalinimas"
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-#, fuzzy
-msgid "Configure"
-msgstr "Nustatyti X"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Ákrovos reþimas"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Sistemos reþimas"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Startuojant paleisti X_Windows"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Ne, að nenoriu automatinio pasisveikinimo"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Taip, að noriu automatinio pasisveikinimo (vrtotojas, darbastalis)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "Gerai"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Nutraukti"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "negaliu atidaryti /etc/inittab skaitymui: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "LILO ádiegimas nepavyko. Ávyko tokia klaida:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutës"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minutë"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundës"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Pradþiai padaryk atsarginæ savo duomenø kopijà"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Perskaityk ádëmiai!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Jeigu tu planuoji naudoti aboot, nepamirðk palikti tuðèios vietos (2048 "
-"sektoriø pakanka)\n"
-"kaupiklio pradþioje"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Klaida"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Meistras"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Naujas"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "Iðmesti"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Prijungimo vieta"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Pasirinktys"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Rûðis"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Atjungti"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Primontuoti"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Pasirink veiksmà"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tu turi vienà didelá FAT skirsná\n"
-"(daþniausiai naudojamas Microsoft DOS/Windows).\n"
-"Patariu tau pakeisti to skirsnio dydá\n"
-"(spragtelëk ant jo, tada ant ¥Pakeisti dydá´)"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Praðom spragtelëti ant skirsnio"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Praðom spragtelëti ant skirsnio"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Praðom spragtelëti ant skirsnio"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Detalës"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "primontuoti nepavyko"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Tuðèias"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Kitas"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Bylø sistemos tipai:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Sukurti"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Naudok ¥%s´ vietoj to"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Iðtrinti"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Pirmiau naudok ¥Numontuoti´"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Pakeitus skirsnio %s tipà, visi duomenys jame bus prarasti"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kur nori primontuoti árenginá %s?"
-
-#: ../../diskdrake.pm_.c:500
-#, fuzzy
-msgid "Mount options"
-msgstr "Modulio parinktys:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:525
-#, fuzzy
-msgid "Removable media"
-msgstr "Iðimamø laikmenø automatinis montavimas"
-
-#: ../../diskdrake.pm_.c:532
-#, fuzzy
-msgid "Change type"
-msgstr "Pakeisti skirsnio tipà"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Kokios bylø sistemos tu nori?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-#, fuzzy
-msgid "Server"
-msgstr "serveris"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Pasirink veiksmà"
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Sukurti naujà skirsná"
-
-#: ../../diskdrake_interactive.pm_.c:188
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Pakeisti á eksperto reþimà"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Pakeisti á normalø reþimà"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Sugráþti"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Ar vis tiek tæsti?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Iðeiti neiðsaugojus"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Iðeiti neiðsaugojus skirsniø lentelës?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ar tu nori iðbandyti nustatymus?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Automatinis suskirstymas"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Iðvalyti viskà"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Dar"
-
-#: ../../diskdrake_interactive.pm_.c:250
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Paðto informacijà"
-
-#: ../../diskdrake_interactive.pm_.c:267
-#, fuzzy
-msgid "Not enough space for auto-allocating"
-msgstr "Naujiems skirsniams nepakanka laisvos vietos"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Visi pirminiai skirsniai yra naudojami"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Að daugiau negaliu pridëti në vieno skirsnio"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Jei nori turëti daugiau skirsniø, praðom iðtrinti vienà, kad vietoj jo "
-"galëtum sukurti iðplëstiná"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Áraðyti skirsniø lentelæ"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Iðgelbëti skirsniø lentelæ"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Iðgelbëti skirsniø lentelæ"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Iðgelbëti skirsniø lentelæ"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Iðimamø laikmenø automatinis montavimas"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Pasirink bylà"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Atsarginë skirsniø lentelë nëra tokio paties dydþio\n"
-"Vis tiek tæsti?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Dëmesio"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Ádëk diskelá á kaupiklá\n"
-"Visi duomenys diskelyje bus prarasti"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Bandau iðgelbëti skirsniø lentelæ"
-
-#: ../../diskdrake_interactive.pm_.c:340
-#, fuzzy
-msgid "Detailed information"
-msgstr "Paðto informacijà"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Pakeisti dydá"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Perkelti"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formatuoti"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Aktyvus"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Pridëti á RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Pridëti á LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Paðalinti ið RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Paðalinti ið LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Taisyti RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Naudoti loopback'ui"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Sukurti naujà skirsná"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Pradþios sektorius: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Dydis (MB): "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Bylø sistemos tipas: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Montavimo taðkas: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Pirmenybë: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Suþymima loopback byla %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Pakeisti skirsnio tipà"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kur nori primontuoti loopback bylà %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Negaliu nuimti montavimo taðko, nes ðis skirsnis naudojamas loopback'ui.\n"
-"Pirma paðalink loopback'us"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Skaièiuojami FAT bylø sistemos rëþiai"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Keièiamas dydis"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Ðio skirsnio dydþio neina pakeisti"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Pasidaryk atsarginæ duomenø ðiame skirsnyje kopijà"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Pakeitus skirsnio %s dydá, visi duomenys jame bus prarasti"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Pasirink naujà dydá"
-
-#: ../../diskdrake_interactive.pm_.c:591
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Dydis (MB): "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Á kurá diskà tu nori já perkelti?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sektorius"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Á kurá sektoriø tu nori já perkelti?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Perkeliama"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Perkeliamas skirsnis..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Pasirink jau esantá RAID, prie kurio pridëti"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "naujas"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Pasirink jau esantá LVM, prie kurio pridëti"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "LVM vardas?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Ðis skirsnis negali bûti naudojamas loopback'ui"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Loopback bylos vardas: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Tikras vardas"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Byla jau naudojama kitam loopback'ui, pasirink kità"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Ði byla jau yra. Naudoti jà?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "árenginys"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "lygis"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "gabalo dydis"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Bûk atsargus: ði operacija yra pavojinga."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Kokio tipo skirsniø skaidymas?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Deja, neámanoma sukurti /boot taip toli kaupiklyje (cilindre >1024).\n"
-"Arba naudok LILO ir tai neveiks, arba nenaudok LILO ir tau nereikës /boot"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Skirsnis, kurá tu pasirinkai kaip ðakniná (/), fiziðkai yra uþ 1024-to\n"
-"disko kaupiklio cilindro, bet tu neturi /boot skirsnio. Jeigu planuoji\n"
-"naudoti LILO ákrovos programà, neuþmirðk pridëti /boot skirsnio"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Tu pasirinkai programiná RAID skirsná kaip ðakniná (/).\n"
-"Jokia ákrovos tvarkyklë negali su ja dirbti be /boot skirsnio.\n"
-"Taigi, nepamirðk sukurti /boot skirsnio"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Árenginio %s skirsniø lentelë bus áraðyta á diskà!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Tau reikia perkrauti, kad pakeitimai bûtø veiksmingi"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Suþymëjus skirsná %s, visi duomenys jame bus prarasti"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Suþymima"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Suþymima loopback byla %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Suþymimas skirsnis %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid nepavyko"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Naujiems skirsniams nepakanka laisvos vietos"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Naujiems skirsniams nepakanka laisvos vietos"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Skiriamoji geba: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Árenginys: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS kaupiklio raidë: %s (spëjama)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Tipas: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Pavadinimas: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Pradþia: sektorius %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Dydis: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektoriai(-iø)"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Nuo cilindro %d iki cilindro %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Suþymëtas\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Nesuþymëtas\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Primontuotas\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback byla(os): %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Skirsnis, ákraunamas pagal nutylëjimà\n"
-"     (MS-DOS uþkrovimui, ne LILO)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Lygis %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Gabalo dydis %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID kaupikliai %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback bylos vardas: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Galimybës tokios, ðis skirsnis\n"
-"yra Tvarkyklës skirsnis\n"
-"gariau palikite já ramybëje.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ðis specialus Bootstrap\n"
-"skirsnis yra skirtas jûsø\n"
-"sistemos dvigubai ákrovai.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Dydis: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindrø(-ai), %s galvuèiø(-os), %s sektoriø(-iai)\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM kaupikliai %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Skirsniø lentelës tipas: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "ant magistralës %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Pasirinktys: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s %s suþymëjimas nepavyko"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Neþinau, kaip suþymëti %s tipu %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "primontuoti nepavyko"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "primontuoti nepavyko: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "klaida numontuojant %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "paprasta"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "serveris"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Tu negali naudoti JFS skirsniams, maþesniems nei 16MB"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Tu negali naudoti ReiserFS skirsniams, maþesniems nei 32MB"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Montavimo taðkai turi prasidëti /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Jau yra skirsnis su montavimo taðku %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Ðis katalogas turi pasilikti ðakninëje bylø sistemoje"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Tau reikia tikros bylø sistemos (ext2, reiserfs) ðiam montavimo taðkui\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Klaida atidarant %s áraðymui: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ávyko klaida -- nerasta tinkamø árenginiø, kur bûtø galima sukurti naujus "
-"skirsnius. Praðom pasitikrinti savo árangà dël galimo gedimo"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Tu neturi jokiø skirsniø!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Aukðèiau yra sàraðas Linux skirsniø, kuriuos pavyko rasti tavo\n"
-"kietajame diske. Tu gali pasilikti sprendimus, padarytus meistro, jie tinka\n"
-"daugumai atvejø. Jei nori pakeisti ðiuos sprendimus, tu turi nurodyti bent\n"
-"ðakniná skirsná (\"/\"). Nepasirink per maþo skirsnio, nes tuomet tu "
-"negalësi\n"
-"ádiegti pakankamai programinës árangos. Jei tu nori laikyti savo duomenis\n"
-"atskirame skirsnyje, pasirink, kurá naudosi \"/home\" (ámanoma tik jei turi "
-"daugiau\n"
-"nei vienà Linux skirsná).\n"
-"\n"
-"Tavo þiniai, skirsniai raðomi tokiu pavidalu: \"Pavadinimas\", \"Talpa\".\n"
-"\n"
-"\n"
-"\"Pavadinimas\" sudaromas taip: \"kaupiklio tipas\", \"kaupiklio numeris\",\n"
-"\"skirsnio numeris\" (pavyzdþiui \"hda1\").\n"
-"\n"
-"\n"
-"\"Kieto disko tipas\" yra \"hd\", jei tavo kietasis kaupiklis yra IDE tipo, "
-"ir \"sd\", jeigu\n"
-"tai SCSI kaupiklis.\n"
-"\n"
-"\n"
-"\"kaupiklio numeris\" visada yra raidë po \"sd\" arba \"hd\". IDE "
-"kaupikliams:\n"
-"\n"
-"   * \"a\" reiðkia \"pagrindinis (master) diskas, prijungtas prie pirmojo "
-"(primary) IDE valdiklio\",\n"
-"\n"
-"   * \"b\" reiðkia \"ðalutinis (slave) diskas, prijungtas prie pirmojo IDE "
-"valdiklio\",\n"
-"\n"
-"   * \"c\" reiðkia \"pagrindinis diskas, prijungtas prie antrojo (secondary) "
-"IDE valdiklio\",\n"
-"\n"
-"   * \"d\" reiðkia \"ðalutinis diskas, prijungtas prie antrojo IDE valdiklio"
-"\",\n"
-"\n"
-"\n"
-"Su SCSI kaupikliais, \"a\" reiðkia \"pirmasis diskas\", \"b\" reiðkia "
-"\"antrasis diskas\" ir t.t."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Dabar tu gali pasirinkti tarnybas, kurias nori paleisti ákrovos metu.\n"
-"\n"
-"\n"
-"Uþvedus þymeklá ant tarnybos, pasirodys pagalbos uþraðas, kuris apraðo "
-"tarnybos\n"
-"vaidmená tavo sistemoje.\n"
-"\n"
-"\n"
-"Bûk ypaè atidus ðiame þingsnyje, jeigu þadi naudotis savo kompiuteriu kaip\n"
-"serveriu: tu tikriausiai norësi nepaleisti jokiø nereikalingø tarnybø.\n"
-"Prisimink, kad kai kurios tarnybos gali bûti pavojingos, jei naudojamos "
-"serveryje.\n"
-"Apskritai, paþymëk tik tas tarnybas, kuriø tau tikrai reikia."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux tvarko laikà pagal GMT (Greenwich Mean Time),\n"
-"ir paverèia já á vietiná laikà pagal tavo pasirinktà laiko juostà."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-#, fuzzy
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Dabar tu turi nuspræsti, kurioje savo kietojo disko vietoje nori ádiegti\n"
-"Mandrake Linux operacijø sistemà. Jei jis yra tuðèias arba jau esanti\n"
-"operacijø sistema naudoja visà vietà jame, tau reikës sudalinti já. Kietojo\n"
-"disko sudalinimas á skirsnius tiesiog yra jo logiðkas padalinimas taip, kad\n"
-"atsirastø laisvos vietos ádiegti tavo naujajai Mandrake Linux sistemai.\n"
-"\n"
-"\n"
-"Kadangi sudalinimo skirsniais padariniai daþniausiai yra negráþtami,\n"
-"dalinimas gali bûti gàsdinantis ir sunkus, jei tu esi nepatyræs vartotojas.\n"
-"Ðis meistras supaprastina tà procesà. Prieð pradëdamas, praðau, nepagailëk\n"
-"laiko ir paskaityk þinynà.\n"
-"\n"
-"\n"
-"Tau reikia maþiausiai dviejø skirsniø. Vienas yra paèiai operacijø "
-"sistemai,\n"
-"o kitas -- virtualiai atminèiai (vadinamai swap).\n"
-"\n"
-"\n"
-"Jei skirsniai jau buvo apibrëþti (ið praeito ádiegimo arba kitu dalinimo "
-"árankiu),\n"
-"tau tereikia pasirinkti juos, kad ádiegtum savo Linux'à.\n"
-"\n"
-"\n"
-"Jei skirsniai dar nebuvo apibrëþti, tu turi juos sukurti. Kad tai "
-"padarytum,\n"
-"naudokis aukðèiau esanèiu meistru. Priklausomai nuo tavo kietojo disko\n"
-"situacijos, yra keli skirtingi sprendimai:\n"
-"\n"
-"* Naudoti esamà skirsná: meistras rado vienà ar daugiau Linux skirsniø tavo "
-"sistemoje. Jei tu nori juos\n"
-"  naudoti, pasirink tai.\n"
-"\n"
-"\n"
-"* Iðvalyti visà diskà: jei tu nori sunaikinti visus duomenis ir skirsnius, "
-"esanèius kietajame diske, ir pakeisti juos\n"
-"  nauja Mandrake Linux sistema, gali pasirinkti ðá variantà. Bûk atsargus su "
-"ðiuo sprendimu, nes jei sutiksi,\n"
-"  nebegalësi apsigalvoti ir sugráþti.\n"
-"\n"
-"\n"
-"* Naudoti tuðèià vietà Windows skirsnyje: jei Microsoft Windows yra ádiegti "
-"á kietàjá diskà ir uþima visà vietà,\n"
-"  esanèià jame, tau teks atlaisvinti vietos Linux duomenims. Kad tai "
-"padarytum, tu gali iðtrinti Windows skirsná\n"
-"  ir duomenis (þiûrëk \"Iðvalyti visà diskà\" bei \"Eksperto reþimas\" "
-"sprendimus) arba pakeisti Windows skirsnio\n"
-"  dydá. Dydþio pakeitimas gali bûti atliktas be duomenø praradimo. Ðis "
-"sprendimas yra rekomenduojamas, jei\n"
-"  tu nori naudoti tiek Mandrake Linux, tiek Microsoft Windows tame paèiame "
-"kompiuteryje.\n"
-"\n"
-"\n"
-"  Prieð pasirinkdamas ðá sprendimà, suprask, kad Microsoft Windows skirsnio "
-"dydis bus maþesnis, nei yra\n"
-"  dabar. Tai reiðkia, kad tu turësi maþiau laisvos vietos Windows'uose "
-"áraðyti duomenims bei ádiegti naujas\n"
-"  programas.\n"
-"\n"
-"\n"
-"* Eksperto reþimas: jei tu nori rankomis sudalinti skirsniais savo kietàjá "
-"diskà, gali rinktis ðá variantà. Ádëmiai\n"
-"  pagalvok, prieð pasirinkdamas ðá sprendimà. Jis yra galingas, taèiau labai "
-"pavojingas. Tu gali prarasti \n"
-"  visus savo duomenis labai lengvai. Taigi, nesirink ðio sprendimo, nebent "
-"tikrai þinai, kà darai."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Bet kokie naujai sukurti skirsniai turi bûti suþymëti, kad juos\n"
-"bûtø galima naudoti (suþymëjimas reiðkia bylø sistemos sukûrimà).\n"
-"\n"
-"\n"
-"Dabar tu gali norëti ið naujo suþymëti kai kuriuos esamus skirsnius, kad\n"
-"iðtrintum duomenis ið jø. Jei nori tai padaryti, paþymëk ir tuos skirsnius,\n"
-"kuriuos nori suþymëti.\n"
-"\n"
-"\n"
-"Pastaba: nebûtina ið naujo suþymëti visø anksèiau sukurtø skirsniø.\n"
-"Tu privalai suþymëti ið naujo skirsnius, kuriuose bus operacijø sistema\n"
-"(tokius kaip \"/\", \"/usr\" ar \"/var\"), taèiau skirsniø su duomenimis, "
-"kuriuos\n"
-"nori iðlaikyti, suþymëti nereikia (daþniausiai \"/home\").\n"
-"\n"
-"\n"
-"Bûk atsargus, pasirinkdamas skirsnius, kadangi suþymint visi duomenys\n"
-"bus iðtrinti, ir nebebus ámanoma jø atstatyti.\n"
-"\n"
-"\n"
-"Spausk \"Gerai\", kai bûsi pasiruoðæs skirsniø suþymëjimui.\n"
-"\n"
-"\n"
-"Spausk \"Atðaukti\", jei nori pasirinkti kitus skirsnius, á kuriuos ádiegti\n"
-"Mandrake Linux sistemà."
-
-#: ../../help.pm_.c:376
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Tavo naujoji Mandrake Linux operacijø sistema ðiuo metu yra\n"
-"ádiegiama. Ðis veiksmas turëtø keletà minuèiø uþtrukti (tai priklauso nuo\n"
-"ádiegiamø paketø bendro dydþio bei kompiuterio spartos).\n"
-"\n"
-"\n"
-"Praðom turëti kantrybës."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-#, fuzzy
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Dabar tu turi pasirinkti, kuriuos skirsnius naudoti tavo naujai Mandrake "
-"Linux \n"
-"sistemai ádiegti. Jei skirsniai jau buvo apibrëþti (ið praeito ádiegimo arba "
-"kitu dalinimo árankiu),\n"
-"tu gali naudoti esanèius skirsnius. Kitu atveju, skirsniai turi bûti "
-"apibrëþti.\n"
-"\n"
-"\n"
-"Kad sukurtum skirsnius, tu pirmiausia turi pasirinkti kietàjá diskà. Diskà "
-"dalinimui\n"
-"gali pasirinkti, paspaudæs ant \"hda\" jei nori pirmo IDE kaupiklio, \"hdb\" "
-"-- antro,\n"
-"arba \"sda\", jei renkiesi pirmàjá SCSI kaupiklá ir t.t.\n"
-"\n"
-"\n"
-"Kad sudalintum skirsniais pasirinktà kietàjá diskà, gali naudotis vienu ið "
-"ðiø variantø:\n"
-"\n"
-"   * Iðvalyti viskà: ðis variantas iðtrina visus skirsnius, esanèius "
-"pasirinktame kietajame diske.\n"
-"\n"
-"\n"
-"    * Automatiðkai paskirti: ðis variantas leidþia automatiðkai sukurti Ext2 "
-"bei swap skirsnius laisvoje tavo\n"
-"     disko vietoje.\n"
-"\n"
-"\n"
-"   * Iðgelbëti skirsniø lentelæ: jei disko skirsniø lentelë yra sugadinta, "
-"tu gali bandyti atstatyti jà su ðiuo variantu.\n"
-"     Bûk atsargus ir prisimink, kad tai gali nepavykti.\n"
-"\n"
-"\n"
-"   * Atðaukti: tu gali naudoti ðá variantà, kad atðauktum visus tavo "
-"pakeitimus.\n"
-"\n"
-"\n"
-"   * Ið naujo: tu gali rinktis ðá variantà, kad atsisakytum visø savo "
-"pakeitimø ir ákeltum pradinæ skirsniø lentelæ.\n"
-"\n"
-"\n"
-"   * Meistras: jei tu nori, kad meistras tau padëtø sudalinti kietàjá diskà, "
-"rinkis ðá variantà. Tai rekomenduojama, jeigu\n"
-"     tu nelabai iðmanai apie skirsniø dalinimà.\n"
-"\n"
-"\n"
-"   * Atkurti ið diskelio: jei tu iðsaugojai savo skirsniø lentelæ á diskelá "
-"ádiegdamas praeità kartà, tu gali atkurti jà\n"
-"     naudodamasis ðiuo variantu.\n"
-"\n"
-"\n"
-"   * Iðsaugoti á diskelá: jei tu nori iðsaugoti savo skirsniø lentelæ á "
-"diskelá, kad galëtum paskui atkurti jà, rinkis ðá\n"
-"     variantà. labai rekomenduojama, kad tu tai padarytum.\n"
-"\n"
-"\n"
-"   * Atlikta: jei tu baigei dalinti savo kietàjá diskà, rinkis ðá variantà, "
-"kad iðsaugotum visus pakeitimus.\n"
-"\n"
-"\n"
-"Tavo þiniai, tu gali pasiekti bet kurá variantà naudodamasis klaviatûra: "
-"vaikðèiok tarp skirsniø su Tab bei\n"
-"Aukðtyn/Þemyn rodyklëmis.\n"
-"\n"
-"\n"
-"Kai skirsnis yra parinktas, gali naudoti:\n"
-"\n"
-"* Ctrl-c kad sukurtum naujà skirsná (jei parinktas tuðèias skirsnis)\n"
-"\n"
-"* Ctrl-d kad iðtrintum skirsná.\n"
-"\n"
-"* Ctrl-m kad nurodytum prijungimà taðkà."
-
-#: ../../help.pm_.c:460
-#, fuzzy
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Tavo kietajame diske buvo aptiktas vienas ar daugiau Microsoft Windows\n"
-"skirsnis. Praðom pasirinkti, kurio ið jø dydá nori pakeisti, kad ádiegtum "
-"savo\n"
-"naujàjà Mandrake Linux operacijø sistemà.\n"
-"\n"
-"\n"
-"Tavo þiniai, kiekvienas skirsnis sàraðe uþraðomas pavidalu \"Linux "
-"pavadinimas\",\n"
-"\"Windows pavadinimas\" \"Talpa\".\n"
-"\n"
-"\"Linux pavadinimas\" sudaromas taip: \"kaupiklio tipas\", \"kaupiklio "
-"numeris\",\n"
-"\"skirsnio numeris\" (pavyzdþiui \"hda1\").\n"
-"\n"
-"\"Kieto disko tipas\" yra \"hd\", jei tavo kietasis kaupiklis yra IDE tipo, "
-"ir \"sd\", jeigu\n"
-"tai SCSI kaupiklis.\n"
-"\n"
-"\n"
-"\"Kaupiklio numeris\" visada yra raidë po \"sd\" arba \"hd\". IDE "
-"kaupikliams:\n"
-"\n"
-"   * \"a\" reiðkia \"pagrindinis (master) diskas, prijungtas prie pirmojo "
-"(primary) IDE valdiklio\",\n"
-"\n"
-"   * \"b\" reiðkia \"ðalutinis (slave) diskas, prijungtas prie pirmojo IDE "
-"valdiklio\",\n"
-"\n"
-"   * \"c\" reiðkia \"pagrindinis diskas, prijungtas prie antrojo (secondary) "
-"IDE valdiklio\",\n"
-"\n"
-"   * \"d\" reiðkia \"ðalutinis diskas, prijungtas prie antrojo IDE valdiklio"
-"\",\n"
-"\n"
-"\n"
-"Su SCSI kaupikliais, \"a\" reiðkia \"pirmasis diskas\", \"b\" reiðkia "
-"\"antrasis diskas\" ir t.t.\n"
-"\n"
-"\n"
-"\"Windows pavadinimas\" yra raidë, kuria tas skirsnis buvo vadinamas "
-"Windows'uose\n"
-"(pirmasis disko skirsnis vadinamas \"C:\")"
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Praðom turëti kantrybës. Ðis veiksmas gali keletà minuèiø uþtrukti."
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Praðom pasirinkti ¥Ádiegti´, jei á sistemà nëra ádiegta ankstesniø Mandrake "
-"Linux versijø,\n"
-"arba jei nori naudoti kelias operacijø sistemas.\n"
-"\n"
-"Praðom pasirinkti ¥Atnaujinti´, jei nori atnaujinti jau ádiegtà Mandrake "
-"Linux versijà.\n"
-"\n"
-"\n"
-"Priklausomai nuo tavo þiniø apie GNU/Linux, tu gali pasirinkti ðias klases "
-"ádiegti ar atnaujinti \n"
-"Mandrake Linux operacijø sistemà:\n"
-"\n"
-"* Rekomenduojama: jei niekad nesi ádiegæs GNU/Linux operacijø sistemos, "
-"pasirink ðià. Ádiegimas bus labai\n"
-"  lengvas, tavæs bus paklausta tik keletas klausimø.\n"
-"\n"
-"\n"
-"* Prisitaikyta: jei esi pakankamai susipaþinæs su GNU/Linux, tu gali "
-"pasirinkti pagrindinæ sistemos paskirtá\n"
-"(darbo stotis, serveris, kûrimo). Tu turësi atsakyti á daugiau klausimø, nei "
-"¥Rekomenduojamoje´ ádiegimo\n"
-"klasëje, taigi turi þinoti, kaip veikia GNU/Linux, kad pasirinktum ðià "
-"klasæ.\n"
-"\n"
-"\n"
-"* Eksperto: jei gerai iðmanai GNU/Linux, gali pasirinkti ðià ádiegimo klasæ. "
-"kaip ir ¥Prisitaikytoje´ klasëje,\n"
-"  tu galësi pasirinkti pagrindinæ sistemos paskirtá\t(darbo stotis, "
-"serveris, kûrimo). Bûk labai atsargus, prieð \n"
-"  pasirinkdamas ðià ádiegimo klasæ. Tu galësi atlikti smarkiai prisitaikytà "
-"ádiegimà.\n"
-"  Atsakyti á kai kuriuos klausimus gali bûti itin sudëtinga, jei gerai "
-"neiðmanai GNU/Linux. Taigi, nesirink ðios\n"
-"  ádiegimo klasës, nebent tikrai þinai, kà darai."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Praðom pasirinkti teisingà prievadà. Pavyzdþiui COM1\n"
-"MS Windows'uose vadinamas ttyS0 GNU/Linux'e."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) ir GRUB yra ákrovos tvarkyklës: jos gali ákrauti\n"
-"tiek GNU/Linux, tiek bet kokià kità operacijø sistemà, esanèià\n"
-"kompiuteryje. Paprastai tos kitos operacijø sistemos yra teisingai\n"
-"atpaþástamos ir ádiegiamos. Jeigu ne, tu gali pridëti áraðus pats ðiame\n"
-"lange. Bûk atidus ir pasirink teisingus parametrus.\n"
-"\n"
-"\n"
-"Tu taip pat gali uþdrausti priëjimà prie tø kitø operacijø sistemø\n"
-"bet kam, jei iðtrinsi atitinkamus áraðus. Bet tuo atveju, tau prireiks\n"
-"ákrovos diskelio, kad jas ákrautum!"
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Tu turi nurodyti, kur áraðyti GNU/Linux paleidimui reikalingà informacijà\n"
-"\n"
-"\n"
-"Jeigu tu tiksliai neþinai, kà darai, pasirink \"Pirmasis kaupiklio sektorius "
-"(MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX bandys surasti PCI SCSI adapterá(-ius). Jei DrakX\n"
-"ras SCSI adapterá ir þinos, kokià tvarkyklæ naudoti, ji bus automatiðkai\n"
-"ádiegta.\n"
-"\n"
-"\n"
-"Jei tu neturi SCSI adapterio, turi ISA SCSI adapterá ar PCI SCSI adapterá,\n"
-"kurio DrakX nepaþásta, tavæs bus paklausta, ar sistemoje yra SCSI\n"
-"adapteris. Jei nëra në vieno, gali spausti ¥Ne´. Jei paspausi ¥Taip´, bus\n"
-"parodytas tvarkykliø sàraðas, ið kurio galësi pasirinkti tinkamà savo\n"
-"adapteriui.\n"
-"\n"
-"\n"
-"Jei tau teks rankomis nurodyti savo adapterá, DrakX papraðys tavæs\n"
-"nurodyti jo nuostatas. Tu turëtum leisti DrakX bandyti atpaþinti árangos\n"
-"nuostatas. Daþniausiai tai suveikia.\n"
-"\n"
-"\n"
-"Jei ne, tau teks nurodyti tvarkyklës nuostatas. Praðom perþiûrëti User "
-"Guide\n"
-"(chapter 3, section \"Collective informations on your hardware\") dël "
-"patarimø,\n"
-"kaip suþinoti informacijà apie árangos dokumentacijà, ið gamintojo "
-"svetainës\n"
-"tinkle (jei turi priëjimà prie interneto) arba ið Microsoft Windows (jei "
-"turi juos\n"
-"savo sistemoje)."
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:765
-#, fuzzy
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot yra NewWorld MacIntosh geleþies ákrovos programa. Ji gali\n"
-"ákrauti GNU/Linux, MacOS, arba MacOSX (jeigu egzistuoja jûsø kompiuteryje).\n"
-"Paprastai ðios operacinës sistemos aptinkamos ir ádiegiamos\n"
-"normaliai. Jeigu taip neávyko galite ðiame ekrane sukurti áraðà rankiniu "
-"bûdu.\n"
-"Bûkite atsargûs pasirinkdami parametrus.\n"
-"\n"
-"\n"
-"Pagrindiniai Yaboot nustatymai yra:\n"
-"\n"
-"\n"
-"  - Init Message: Praneðimas parodomas prieð ákrovà.\n"
-"\n"
-"\n"
-"\n"
-"  - Boot Device: Nurodykite kur padëti informacija kurios reikësto \n"
-"ákrauti GNU/Linux. Bendrai tariant jûs jau turëjote sukurti bootstrap "
-"skirsná \n"
-"kuri laikys ðià informacijà.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: Skirtingai nuo LILO yaboot turi dvi pauzes\n"
-"Pirmoji pauzë matuojamas sekundëmis. Èia galite pasirinkti\n"
-"tarp CD, OF ákrova, MacOS, arba Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: Ðis uþlaikymas panaðus á LILO ákrovos pauzæ.  "
-"Pasirinkë \n"
-"Linux jus turësite ðià pauzæ 0.1 sekundës dalimis prieð pasirenkantkernelio\n"
-"apraðymà.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: Pasirinkdami ðá nustatymà jums leis pasirinkti 'C' "
-"iðCD \n"
-"pirmoje ákrovos uþklausoje.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: Pasirinkus ðá nustatymà jums leis pasirinkti 'N' Open\n"
-"Firmware pirmoje ákrovos uþklausoje.\n"
-"\n"
-"\n"
-"  - Default OS: Galite pasirinkti kuri OS ásikraus pagal nutylëjimà kai "
-"baigsis Open Firmware \n"
-"uþlaikymas."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Pasirink kietàjá diskà, kurá nori iðtuðtinti, kad ádiegtum naujà\n"
-"Mandrake Linux sistemà. Bûk atsargus, visi duomenys, esantys jame, bus\n"
-"prarasti, ir jø nebebus ámanoma atkurti."
-
-#: ../../help.pm_.c:832
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Spausk \"Gerai\", jei nori iðtrinti visus duomenis ir skirsnius, esanèius\n"
-"ðiame kietajame diske. Bûk atsargus, kai paspausi \"Gerai\", tu nebegalësi\n"
-"atkurti jokiø duomenø nei skirsniø, kurie buvo ðiame diske, áskaitant bet\n"
-"kokius Windows duomenis.\n"
-"\n"
-"\n"
-"Spausk \"Atðaukti\", kad nutrauktum operacijà ir neprarastum jokiø duomenø\n"
-"nei skirsniø, esanèiø ðiame kietajame diske."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Negalima naudoti transliavimo be NIS domeno"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ádëk FAT formatuotà diskelá á kaupiklá %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Kad iðsaugoti ðiø paketø pasirinkimà ákraukite sistemà su ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Klaida skaitant bylà %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Gerai"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Kad kai kurie tavo kompiuterio árenginiai veiktø, jiems reikia\n"
-"taip vadinamø \"proprietary\" tvarkykliø. daugiau informacijos apie jas "
-"gali\n"
-"rasti èia: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Tu turi turëti root skirsná. Tam sukurk skirsná\n"
-"(arba spragtelëk ant jau esamo). Tada pasirink\n"
-"veiksmà ¥Montavimo taðkas´ ir nurodyk jam ¥/´"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Tu privalai turëti swap skirsná"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Tu neturi swap skirsnio\n"
-"\n"
-"Vis tiek tæsti?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Tu privalai turëti swap skirsná"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Naudoti laisvà vietà"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Naujiems skirsniams nepakanka laisvos vietos"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Naudoti esamà skirsná"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Nëra jokio skirsnio, tinkamo naudojimui"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Naudoti Windows skirsná loopback'ui"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kuri skirsná tu nori naudoti Linux4Win ádiegimui?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Pasirink dydþius"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Ðakninio skirsnio dydis, MB: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Swap skirsnio dydis, MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Naudoti laisvà vietà Windows skirsnyje"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Kurio skirsnio dydá tu nori pakeisti?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Skaièiuojami Windows bylø sistemos rëþiai"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT dydþio keitimo programa nesusitvarko su tavo\n"
-"skirsniu, ávyko tokia klaida: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Tavo Windows skirsnis yra pernelyg fragmentuotas, pirma paleisk ¥defrag´"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"PERSPËJIMAS!\n"
-"\n"
-"DrakX dabar pakeis tavo Windows skirsnio dydá. Bûk atsargus: ðis veiksmas\n"
-"yra pavojingas. Jeigu to dar nepadarei, dabar pats laikas iðeiti ið "
-"ádiegimo,\n"
-"paleisti scandisk ið Windows (nepakenktø ir defrag paleisti), o tada ið "
-"naujo\n"
-"pradëti ádiegimà. Taip pat turëtum pasidaryti atsarginæ duomenø kopijà.\n"
-"Kai viskas sutvarkyta, spausk Gerai."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Koká dydá norëtum palikti Windows'ams"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "skirsnyje %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Nepavyko pakeisti FAT dydþio: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nëra jokiø FAT skirsniø, kuriø dydá bûtø galima pakeisti arba naudoti juos "
-"loopback'ui\n"
-"(arba nëra pakankamai laisvos vietos)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Iðtrinti visà diskà"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Iðmesti Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Tu turi daugiau negu vienà kietà diskà, á kurá nori ádiegti Linux?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "VISI kaupiklyje %s esantys skirsniai ir duomenys bus prarasti"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Rankinis diskø skirstymas"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Naudoti fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Tu dabar gali sudalinti %s.\n"
-"Kai baigsi, nepamirðk iðsaugoti su 'w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Windows skirsnyje nëra pakankamai laisvos vietos"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Að niekur negaliu rasti vietos ádiegimui"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX Skirsniø dalinimo meistras rado tokius sprendimus:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Dalinimas á skirsnius nepavyko: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Paleidþiamas tinklas"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Iðjungiamas tinklas"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ávyko klaida, bet að neþinau, kaip su ja graþiai susitvarkyti.\n"
-"Tæsk darbà savo paties rizika."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Pasikartojantis montavimo taðkas %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Kai kurie svarbûs paketai nebuvo tvarkingai ádiegti.\n"
-"Arba tavo CD-ROM kaupiklis, arba CD yra su trûkumais.\n"
-"Patikrink CD ádiegtame kompiuteryje, naudodamas \"rpm -qpl Mandrake/RPMS/*."
-"rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Sveiki atvykæ á %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Neprieinamas në vienas diskeliø kaupiklis"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Áeinama á þingsná ¥%s´\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Pasirink dydá, kiek nori visko ádiegti"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Bendras dydis: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versija: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Dydis: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Pasirink paketus, kuriuos tu nori ádiegti"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Info"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Ádiegti"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Ádiegiama"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Praðom palaukti, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Liko laiko "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Bendra trukmë "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Ruoðiamas ádiegimas"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Ádiegiamas paketas %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Vis tiek tæsti?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Ávyko klaida, bandant sutvarkyti paketus:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Naudoti esamus X11 nustatymus?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Tavo sistemoje maþai resursø. Tu gali susidurti su bëdomis, ádiegdamas\n"
-"Mandrake Linux. Jei taip atsitiktø, gali pabandyti tekstiná diegimo bûdà:\n"
-"Kai uþsikrauna ið CDROM'o, paspausk `F1', o tada ávesk \"text\"."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Ádiegimo klasë"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Praðom pasirinkti vienà ið ðiø ádiegimo klasiø:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Grupiø, kurias tu pasirinkai, bendras dydis yra apie %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Jei tu nori ádiegti maþiau, nei èia nurodyta,\n"
-"pasirink, kiek procentø paketø tu norëtum ádiegti.\n"
-"\n"
-"Jei procentø maþai, bus ádiegti tik patys svarbiausi paketai;\n"
-"su 100% bus ádiegti visi paþymëti paketai."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Tu turi vietos diske tik %d%% ðiø paketø.\n"
-"\n"
-"Jei tu nori ádiegti maþiau, nei èia nurodyta,\n"
-"pasirink, kiek procentø paketø tu norëtum ádiegti.\n"
-"Jei procentø maþai, bus ádiegti tik patys svarbiausi paketai;\n"
-"su %d%% bus ádiegtà tiek paketø, kiek tik ámanoma."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Sekanèiame þingsnyje tu juos galësi pasirinkti tiksliau."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Kiek procentø paketø ádiegti"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Paketø grupiø pasirinkimas"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Atskirø paketø pasirinkimas"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Bendras dydis: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Blogas paketas"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Pavadinimas: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Svarba: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Tu negali pasirinkti ðio paketo, kadangi nebëra pakankamai vietos jam ádiegti"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Ruoðiamasi ádiegti ðiuos paketus"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Ruoðiamasi paðalinti ðiuos paketus"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Tu negali paþymëti/atþymëti ðio paketo"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Tai yra privalomas paketas, jis negali bûti atþymëtas"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Tu negali atþymëti ðio paketo. Jis jau yra ádiegtas"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ðis paketas privalo bûti atnaujintas\n"
-"Ar tu tikrai nori já atþymëti?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Tu negali atþymëti ðio paketo. Jis privalo bûti atnaujintas"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:460
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Iðsaugoti á diskelá"
-
-#: ../../install_steps_gtk.pm_.c:461
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Iðsaugoti paketø pasirinkimà"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Minimal install"
-msgstr "Iðmesti"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Skaièiuojama"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Praðome palaukti. Ruoðiamas ádiegimas"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d paketø"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Perspëjimas\n"
-"\n"
-"Praðau ádëmiai perskaityti ðá susitarimà. Jeigu jûs nesutinkate nors\n"
-"su vienu kunktu jums neleidþiama naudoti ðios laikmenos. Paspauskite "
-"'Atmetu', \n"
-"kad tæsti ádiegimà be ðios laikmenos.\n"
-"\n"
-"\n"
-"Kaikurie CD esantys komponentai nëra paþymëti \n"
-"GPL Licenzija ar kaþkuo panaðiu. Tokiu atveju kiekvienas\n"
-"komponentas turi savo licenzijà. \n"
-"Praðau pirmiau perskaityti ir sutikti su tomis licenzijomis prieð \n"
-"naudojant arba perduodant tuos komponentus. \n"
-"Tokios licenzijos bandrai sulaiko komponentø perdavimà, kopijavimà \n"
-"(iðskyrus rezervinæ kopijà), atvirkðtinæ inþinerijà, \n"
-"de-assembly, de-compilation arba modifikavimà. \n"
-"Bet koks susitarimo lauþymas atima ið jûsø visas ðios licenzijos suteiktas\n"
-"teises. Jeigu jums speciali licenzija nesuteikia ápatinkø ágaliojimø\n"
-"jûs negalite ádiegti ðiø programø á daugiau negu vienà kompiuterá\n"
-"arba pritaikyti naudoti tinkle. Jei abejojate\n"
-"susisiekite tiesiai su gamintoju. \n"
-"Ðiø komponentø arba dokumentacijos  perdavimas treèioms ðalims\n"
-"yra uþdraustas.\n"
-"\n"
-"\n"
-"Visos CD diske esanèiø komponentø teisës priklauso gerbiamiems\n"
-"jø autoriams ir saugomos intelektualios nuosavybës teises\n"
-"sauganèiø ástatymø.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Sutinku"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Atmetu"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Pakeisk CD!\n"
-"\n"
-"Praðom ákiðti CD su uþraðu ¥%s´ á kaupiklá, tada paspausk Gerai.\n"
-"Jei tu jo neturi, spausk Nutraukti, kad iðvengtum ádiegimo ið ðio CD."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Ávyko klaida, ádiegiant paketus:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Ávyko klaida"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Licenzijos patvirtinimas"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klaviatûra"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Praðom pasirinkti klaviatûros iðdëstymà."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Èia yra galimø klaviatûrø sàraðas"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Kurios Ádiegimo klasës tu nori?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Ádiegti/Atnaujinti"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Ar tai ádiegimas, ar atnaujinimas?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Rekomenduojama"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Eksperto"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Atnaujinimas"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Praðom pasirinkti savo pelës rûðá."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Pelës prievadas"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-"Praðom pasirinkti, prie kurios nuosekliosios jungties prijungta tavo pelë."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Nustatomos PCMCIA plokðtes..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Nustatome IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "nëra prieinamø skirsniø"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Perþiûrimi skirsniai, ieðkant montavimo taðkø"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Pasirink montavimo taðkus"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Að negaliu perskaityti skirsniø lentelës, ji pernelyg sugadinta :(\n"
-"Galiu pabandyti iðvalyti blogus skirsnius (VISI DUOMENYS bus prarasti!)\n"
-"Kitas sprendimas -- neleisti DrakX taisyti skirsniø lentelæ.\n"
-"(klaida %s)\n"
-"\n"
-"Ar sutinki prarasti visus skirsnius?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake nesugebëjo teisingai perskaityti skirsniø lentelës.\n"
-"Tæsk savo paties rizika!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:349
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Nerastas pagrindinis skirsnis"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Ðakninis skirsnis"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Kur yra tavo sistemos ðakninis skirsnis (/)?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Tau reikia perkrauti kompiuterá, kad skirsniø lentelës pakeitimai bûtø "
-"naudojami"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Pasirink skirsnius, kuriuos nori suþymëti"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Ieðkoti blogø blokø?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Suþymimi skirsniai"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Sukuriama ir suþymima byla %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nepakanka swap atminties ádiegimo vykdymui, praðom praplësti"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Ieðkomi galimi paketai"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Ieðkoma atnaujintinø paketø"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "Tavo sistemoje neuþtenka vietos ádiegimui arba atnaujinimui (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Pilnai (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimaliai (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Rekomenduojama (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Prisitaikyti"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:525
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Atstatyti ið diskelio"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Atstatyti ið diskelio"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Package selection"
-msgstr "Paketø grupiø pasirinkimas"
-
-#: ../../install_steps_interactive.pm_.c:532
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Ádëk diskelá á kaupiklá %s"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Iðsaugoti á diskelá"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Jei turi visus CD þemiau esanèiame sàraðe, spausk Gerai.\n"
-"Jei neturi në vieno ið ðiø CD, spausk Nutraukti.\n"
-"Jei trûksta tik kai kuriø CD, atþymëk juos, o tada spausk Gerai."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM su uþraðu \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Ádiegiamas paketas %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Konfigûracija po ádiegimo"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Ádëk diskelá á kaupiklá %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Ádëk tuðèià diskelá á kaupiklá %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Dabar jûs turite galimybæ parsisiøsti ðiravimo programà.\n"
-"\"nPERSPËJIMAS:\n"
-"Dël áviariø programiniø juridiniø, teisiniø ir kitø prieþaðèiø jums\n"
-"reikia ásitikinti kad jûs galite parsisiøsti ir naudoti ðità programinæ\n"
-"árangà\n"
-"\n"
-"Prieð vartotojus kurie nesilaikys atitinkamø ástatymø bus gali bûti\n"
-"imtasi sankcijø\n"
-"Mandrakesoft neatsako uþ netiesioginæ arba atsitiktinis arba koks nors\n"
-"kitokià þalà.\n"
-"\n"
-"D4l i6kilusi7 klausim7 susisiekite su: \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Pasirink atvaizdá (mirror), ið kurio imti paketus"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Jungiamasi prie atvaizdþio (mirror), kad gautume prieinamø paketø sàraðà"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Pasirink paketus, kuriuos tu nori ádiegti."
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Kokia tavo laiko juosta?"
-
-#: ../../install_steps_interactive.pm_.c:813
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Ar tavo árangos laikrodis nustatytas GMT?"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:821
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS serveris"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Nutolæs CUPS serveris"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Spausdintuvo nëra"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Apibendrinimas"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Pelë"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Laiko juosta"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Spausdintuvas"
-
-#: ../../install_steps_interactive.pm_.c:875
-#, fuzzy
-msgid "ISDN card"
-msgstr "Vidinë ISDN plokðtë"
-
-#: ../../install_steps_interactive.pm_.c:878
-#, fuzzy
-msgid "Sound card"
-msgstr "Standartinë"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-#, fuzzy
-msgid "NIS"
-msgstr "Naudoti NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-#, fuzzy
-msgid "Local files"
-msgstr "Vietinis spausdintuvas"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Nurodyti root slaptaþodá"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Jokio slaptaþodþio"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Ðis slaptaþodis yra pernelyg paprastas (turi bûti bent %d simboliø ilgio)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Autentikacija"
-
-#: ../../install_steps_interactive.pm_.c:949
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autentikacija"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:951
-#, fuzzy
-msgid "LDAP Server"
-msgstr "serveris"
-
-#: ../../install_steps_interactive.pm_.c:957
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Autentikacijos NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS domenas"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS serveris"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Ákrovos diskelis leidþia pakrauti Linux sistemà be normalaus sistemos "
-"ákroviklio.\n"
-"Tai gali bûti naudinga, jei tu nenori ádiegti SILO á savo sistemà, arba "
-"kita\n"
-"operacijø sistema iðmeta SILO, arba jei SILO nedirba su tokia árangos "
-"konfigûracija.\n"
-"Ákrovos diskelis taip pat gali bûti naudojamas su Mandrake rescue diskeliu, "
-"tokiu\n"
-"bûdu pasidaro daug lengviau atkurti sistemà po smarkiø gedimø.\n"
-"\n"
-"Jei nori sukurti ákrovos diskelá savo sistemai, ákiðk diskelá á pirmàjá\n"
-"árenginá ir spausk \"Gerai\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Pirmasis diskeliø árenginys"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Antrasis diskeliø árenginys"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Praleisti"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Ákrovos diskelis leidþia pakrauti Linux sistemà be normalaus sistemos "
-"ákroviklio.\n"
-"Tai gali bûti naudinga, jeigu tu nenori ádiegti LILO (arba GRUB) á savo "
-"sistemà,\n"
-"arba jei kita operacijø sistema iðmeta LILO, arba jei LILO nedirba su esama "
-"árangos\n"
-"konfigûracija. Ákrovos diskelis taip pat gali bûti naudojamas su Mandrake "
-"rescue\n"
-"diskeliu, tokiu bûdu pasidaro daug lengviau atkurti sistemà po smarkiø "
-"gedimø.\n"
-"\n"
-"Ar tu nori sukurti ákrovos diskelá?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Atleisk, bet neradau jokio diskeliø kaupiklio"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Pasirink kaupiklá, kurá nori naudoti ákrovos diskeliui sukurti"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Ádëk diskelá á kaupiklá %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Kuriamas ákrovos diskelis"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Ruoðiama ákrovos tvarkyklë"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Ar nori naudoti aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Klaida ádiegiant aboot,\n"
-"bandyti ádiegti priverstinai, net jei tai sunaikintø pirmàjá skirsná?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Ádiegti ákrovos tvarkyklæ"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Nepavyko ádiegti ákrovos tvarkyklës. Ávyko tokia klaida:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Þemas"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Vidutinis"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Aukðtas"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Pasirink saugumo lygá"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ádëk tuðèià diskelá á kaupiklá %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Kuriamas automatinio ádiegimo diskelis"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Kai þingsniai buvo nebaigti.\n"
-"\n"
-"Ar tu nori iðeiti dabar?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Sveikiname. Ádiegimas baigtas.\n"
-"Iðtrauk ádiegimo laikmenas ir spausk Enter, kad perkrautum.\n"
-"\n"
-"Kad suþinotum apie pataisymus, kurie prieinami ðiai Mandrake Linux laidai,\n"
-"pasiþiûrëk á Errata, kuris yra http://www.mandrakelinux.com/.\n"
-"\n"
-"Informacija apie tavo sistemos konfigûravimà yra oficialioje\n"
-"Mandrake Linux User's Guide knygoje."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Sukurti automatinio ádiegimo diskelá"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Automatinis ádiegimas reikalui esant gali bûti pilnai\n"
-"automatizuotas. Tokiu atveju jis uþims visà diskà!!\n"
-"(turint omenyje ádiegimà á kità dëþæ).\n"
-"\n"
-"Jûs galbût norësite pakartoti ádiegimà.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automatinis"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Parodyti vël"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Iðsaugoti paketø pasirinkimà"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux ádiegimas %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> tarp elementø  | <Tarpas> parenka | <F12> kitas langas "
-
-#: ../../interactive.pm_.c:73
-#, fuzzy
-msgid "kdesu missing"
-msgstr "nieko"
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "Pasirink veiksmà"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Iðplëstinis"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Praðom palaukti"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Iðskleisti medá"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Suskleisti medá"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Perjungti tarp rikiavimo pagal grupes ar abëcëlæ"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Dviprasmiðkumas (%s), bûk tikslesnis\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Blogas pasirinkimas, bandyk vël\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (pagal nutylëjimà %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Tavo pasirinkimas? (pagal nutylëjimà %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr ""
-"Tavo pasirinkimas? (pagal nutylëjimà %s, ávesk `none' jei nieko nenori) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Èekø (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Vokieèiø"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorako"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Ispanø"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Suomiø"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Prancûzø"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norvegø"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Lenkø"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Rusø"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Ðvedø"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Jungtinës karalystës klaviatûra"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "JAV klaviatûra"
-
-#: ../../keyboard.pm_.c:159
-#, fuzzy
-msgid "Albanian"
-msgstr "Iranieèiø"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armënø (senoji)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armënø (spausd. maðinëlës)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armënø (fonetinë)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidþanieèiø (lotyniðka)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belgø"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulgarø"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilø (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Baltarusiø"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Ðveicarø (Vokiðkas iðdëstymas)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Ðveicarø. (Prancûziðkas iðdëstymas)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Èekø (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Vokieèiø (be mirusiø klaviðø)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Danø"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorako (JAV)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorako (Norvegø)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estø"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzinø (\"Rusiðkas\" iðdëstymas)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzinø (\"Latin\" iðdëstymas)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Graikø"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Vengrø"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Kroatø"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Izraelio"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Þydø (Fonetinë)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iranieèiø"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islandø"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Italø"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japoniðka 106 klaviðø"
-
-#: ../../keyboard.pm_.c:201
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Jungtinës karalystës klaviatûra"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Lotynø Amerikos"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lietuviø ÀÞERTY (sena)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lietuviø ÀÞERTY (nauja)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lietuviø \"skaièiø eilë\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lietuviø \"fonetinë\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "Vieta"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Makedonieèiø"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Olandø"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Lenkø (QWERTY iðdëstymas)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Lenkø (QWERTZ iðdëstymas)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugalø"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Kanadieèiø (Kvebeko)"
-
-#: ../../keyboard.pm_.c:217
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Rusiðka (Yawerty)"
-
-#: ../../keyboard.pm_.c:218
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Rusiðka (Yawerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Rusiðka (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Slovënø"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakø (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakø (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaidþanieèiø (kirilica)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Thai klaviatûra"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Thai klaviatûra"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turkø (tradicinis \"F\" modelis)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turkø (ðiuolaikinis \"Q\" modelis)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukrainieèiø"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "JAV klaviatûra (tarptautinë)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamieèiø \"skaièiø eilë\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavø (lotyniðkas/kirilikos)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Loopback montavimai %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Pirmiausia iðmeskite loginius tomus\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - pelë"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standartinë"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Paprasta PS2 pelë su ratuku"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-#, fuzzy
-msgid "1 button"
-msgstr "2 klaviðø"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Paprasta"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Su ratuku"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "nuoseklioji"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Paprasta 2 klaviðø pelë"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Paprasta 3 klaviðø pelë"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (nuoseklioji, seno C7 tipo)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 klaviðø"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 klaviðø"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "jokios"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Pelës nëra"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Praðom iðbandyti pelæ"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Kad suþadintum pelæ,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "PASUK RATUKÀ!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Suomiø"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Toliau ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Ankstesnis"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Ar taip teisinga?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Prisijungti prie interneto"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Labiausiai paplitæs bûdas prisijungti su ADSL yra pppoe.\n"
-"Vis dëlto, kai kurios jungtys gali naudoti PPTP arba DHCP.\n"
-"Jei neþinai, pasirink 'naudoti pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "naudoti dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "naudoti pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "naudoti pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Kurá DHCP klientà norëtum naudoti?\n"
-"Áprasta yra dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Neradau jokio ethernet tinklo adapterio tavo sistemoje.\n"
-"Að negaliu sutvarkyti ðio jungties tipo."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Pasirink tinklo interfeisà"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Praðom pasirinkti, kurià tinklo plokðtæ tu nori naudoti prisijungimui prie "
-"interneto"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nerasta jokia tinklo plokðtë"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Konfigûruojamas tinklas"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Praðom ávesti savo hosto vardà, jei já þinai.\n"
-"Kai kuriems DHCP reikia, kad hosto vardas galiotø.\n"
-"tai turëtø bûti pilnai apraðytas hosto vardas, panaðus\n"
-"á \"mano.filialas.istaiga.lt\"."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Hosto vardas"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Tinklo Konfigûravimo Meistras"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Iðorinë ISDN plokðtë"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Vidinë ISDN plokðtë"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Kokios rûðies tavo ISDN jungtis?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Aptikta ugniasienës konfigûracija!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Aptikta ugniasienës konfigûracija!"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN konfigûravimas"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Pasirink savo tiekëjà.\n"
-" Jei jo nëra sàraðe, pasirink Unlisted"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Ákrovos Protokolas"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Likæs pasaulis"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Likæs pasaulis \n"
-" be D-Channel (nuomojamos linijos)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Kurá protokolà nori naudoti?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Kokios rûðies plokðtæ tu turi?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Neþinau"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Jei tu turi ISA plokðtæ, reikðmës sekanèiame ekrane turëtø bûti teisingos.\n"
-"\n"
-"Jei turi PCMCIA plokðtæ, tu turi þinoti jos IRQ bei IO.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Nutraukti"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Tæsti"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Kuri yra tavo ISDN plokðtë?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Að aptikau ISDN PCI plokðtæ, taèiau neþinau jos tipo. Pasirink vienà PCI "
-"plokðtæ sekanèiame ekrane."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Jokia ISDN PCI plokðtë nerasta. praðom pasirinkti vienà kitame ekrane."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-"Praðom pasirinkti, prie kurios nuosekliosios jungties yra prijungtas tavo "
-"modemas."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Prisiskambinimo nustatymai"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Jungties pavadinimas"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Telefono numeris"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Pasisveikinimo ID"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Paremtas skriptu"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Paremtas terminalu"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Domeno vardas"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Pirmasis DNS serveris"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Antrasis DNS serveris"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Tu gali atsijungti arba ið naujo nustatyti jungtá."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Tu gali ið naujo nustatyti jungtá."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Tu dabar esi prisijungæs prie interneto."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Tu gali prisijungti prie interneto arba ið naujo nustatyti jungtá."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Tu dabar nesi prisijungæs prie interneto."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Prisijungti prie interneto"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Atsijungti nuo interneto"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Nustatyti tinklo jungtá (LAN arba interneto)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Interneto jungtis ir nustatymas"
-
-#: ../../network/netconnect.pm_.c:96
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Tu gali atsijungti arba ið naujo nustatyti jungtá."
-
-#: ../../network/netconnect.pm_.c:105
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Tu gali atsijungti arba ið naujo nustatyti jungtá."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Tinklo konfigûravimas"
-
-#: ../../network/netconnect.pm_.c:130
-#, fuzzy
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Kadangi jûs diegiate per tinklà jûsø tinklo nustatymai yra padaryti.\n"
-"Spragtelëkite ant Gerai kad perkonfiguruoti Network/Internet pasijungimà "
-"arbaatðaukti, kad praleisti ðá punktà.\n"
-
-#: ../../network/netconnect.pm_.c:155
-#, fuzzy
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Internet Pasijungimas\n"
-"\n"
-"Mes ruoðiamës konfiguruoti jûsø internet/tinkliná pasijungimà.\n"
-"Jeigu nenorite naudoti automatinio aptikimo nuimkite ðià atþymà.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Konfiguravimui pasirinkite prifailà"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Naudokite automatiná aptikimà"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Ieðkoma áranga..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Nustatyti normalià jungtá per modemà"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "aptiktas prievade %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN jungtis"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "aptiktas %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, fuzzy
-msgid "ADSL connection"
-msgstr "LAN jungtis"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "aptiktas interfeise %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Kabelinë jungtis"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Kabelinë jungtis"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "LAN jungtis"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "aptiktos ethernet kortos(a)"
-
-#: ../../network/netconnect.pm_.c:190
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Pasirink kurá áranká norëtum naudoti"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:215
-#, fuzzy
-msgid "Internet connection"
-msgstr "Interneto jungties dalinimas"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Ar tu nori prisijungti tik ájungus?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Tinklo konfigûravimas"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Ar tu nori ið naujo paleisti tinklà"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Sveikiname, jûsø tinklo ir Internet konfiguracija baigta.\n"
-"\n"
-"Dabar konfiguracijà pritaikysime sistemai.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Po to rekomenduojame jums perleisti X aplinkà,\n"
-"kad iðvengti problemø su kompiuterio vardu."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"PERSPËJIMAS: Gis árenginys jau anksèiau buvo sutvarkytas prisijungimui prie\n"
-"interneto. \n"
-"Paprasèiausiai spausk Gerai, jei nori palikti já toká.\n"
-"Jei pakeisi kà nors þemiau esanèiuose laukuose, tai ásigalios vietoj senøjø "
-"nuostatø."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Praðom áraðyti ðio kompiuterio IP konfigûracijà.\n"
-"Kiekvienas laukas turi bûti áraðytas kaip IP adresas\n"
-"deðimtainiais skaièiais su taðkais (pvz. 192.168.2.36)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigûruojamas tinklo árenginys %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (tvarkyklë %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP adresas"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Automatinis IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresas turëtø bûti 1.2.3.4 formato"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Praðom ávesti savo hosto vardà, jei já þinai.\n"
-"tai turëtø bûti pilnai apraðytas hosto vardas, panaðus\n"
-"á \"mano.filialas.istaiga.lt\".\n"
-"Taip pat gali ávesti ðliuzo (gateway) IP adresà, jeigu toká turi"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS serveris"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Ðliuzas (Gateway)"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Ðliuzo (gateway) árenginys"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Proxy konfigûracija"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Proxy turëtø bûti http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Proxy turëtø bûti ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Interneto konfigûravimas"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Ar nori pabandyti prisijungti prie interneto dabar?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Iðbandoma jungtis..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Sistema dabar prijungta prie interneto."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Neatrodo, kad sistema dabar prijungta prie interneto.\n"
-"Bandyk ið naujo konfigûruoti jungtá."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Jungties konfigûravimas"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Praðom uþpildyti arba patikrinti ðá laukelá"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "Plokðtës IRQ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Plokðtës mem (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "Plokðtës IO"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "Plokðtës IO_0"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "Plokðtës IO_1"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Tavo asmeninis tel. numeris"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Tiekëjo pavadinimas (pvz. tiekejas.lt)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Tiekëjo telefono numeris"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "Tiekëjo DNS 1 (pasirinktinai)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "Tiekëjo DNS 2 (pasirinktinai)"
-
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "Pasirink klaviatûrà"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Skambinimo reþimas"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-#, fuzzy
-msgid "Connection speed"
-msgstr "Jungties tipas: "
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Jungties tipas: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Pasisveikinimas (vartotojo vardas)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Slaptaþodis"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Iðplëstiniai skirsniai ðioje platformoje nepalaikomi"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Skirsniø lentelëje yra tuðèios vietos, bet ji negali bûti panaudota.\n"
-"Vienintelis sprendimas yra perkelti pirminius skirsnius taip, kad tuðèia "
-"vieta bûtø ðalia iðplëstiniø skirsniø"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Nepavyko atstatyti ið bylos %s: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Bloga atsarginë byla"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Klaida áraðant á bylà %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Kaþkas blogo nutiko jûsø kaupikliui. \n"
-"Bandymas pabandyti jo vientisumà nepavyko. \n"
-"Tai sako, kad raðymas á já bus visiðkas mëðlas. "
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "turi turëti"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "svarbus"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "labai gerai"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "nuostabu"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "galbût"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Vietinis spausdintuvas"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Nutolæs spausdintuvas"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Nutolæs CUPS serveris"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Nutolæs lpd serveris"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Tinklo spausdintuvas (lizdas)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Spausdinimo serveris"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Spausdintuvo árenginio URI"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modulis %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Pasirink spausdintuvo jungtá"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kaip yra prijungtas spausdintuvas?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"Su nutolusiu CUPS serveriu, tau ðioje vietoje nereikia nustatinëti\n"
-"jokiø spausdintuvø; jie bus automatiðkai atpaþástami.\n"
-"Jeigu abejoji, pasirink \"Nutolæs CUPS serveris\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Jokia"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Pasirink áprastà vartotojà:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-#, fuzzy
-msgid "Close"
-msgstr "Pelë"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "Nutolæs spausdintuvas"
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresas turëtø bûti 1.2.3.4 formato"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Prievado numeris turi bûti skaièius"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "Vietinis spausdintuvas"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "CUPS serverio IP"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Prievadas"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Ádiegimo Tipo Konfiguracija"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Ieðkoma áranga..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Patikrinti prievadus"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "\"%s\" modelio spausdintuvas buvo aptiktas prie "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Vietinio spausdintuvo jungtis"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Prie kurio árenginio yra prijungtas tavo spausdintuvas\n"
-"(atmink, kad /dev/lp0 yra LPT1 ekvivalentas)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Spausdintuvo árenginys"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Skaitoma CUPS tvarkykliø duomenø  bazë"
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Nutolusio lpd spausdintuvo nuostatos"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Norëdamas naudotis nutolusia lpd spausdinimo eile, tu turi\n"
-"nurodyti to serverio hosto vardà ir pavadinimà eilës, kurioje\n"
-"bus talpinami darbai."
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nutolusio hosto vardas"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Nutolæs spausdintuvas"
-
-#: ../../printerdrake.pm_.c:320
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Nutolusio hosto vardas"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nutolusio hosto vardas"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) spausdintuvo nuostatos"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Norëdamas spausdinti á SMB spausdintuvà, tu turi\n"
-"nurodyti SMB hosto vardà, (Atkreipk dëmesá, kad jis gali skirtis nuo\n"
-"jo TCP/IP hosto vardo!) ir galbût spausdinimo serverio IP adresà,\n"
-"spausdintuvo share'o vardà, vartotojo vardà, slaptaþodá ir darbo grupës vardà"
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "SMB serverio hostas"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "SMB serverio IP"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Share'o vardas"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Darbo grupë"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "NetWare spausdintuvo nuostatos"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Norëdamas spausdinti á NetWare spausdintuvà, tu turi\n"
-"nurodyti spausdinimo serverio vardà, (Atkreipk dëmesá, kad jis gali\n"
-"skirtis nuo jo TCP/IP hosto vardo!), spausdintuvo eilës vardà "
-"spausdintuvui,\n"
-"prie kurio nori prieiti, bei reikalingus vartotojo vardà ir slaptaþodá."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Spausdinimo serveris"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Spausdinimo eilës pavadinimas"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Lizdinio spausdintuvo nuostatos"
-
-#: ../../printerdrake.pm_.c:528
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Kad galëtum spausdinti á lizdiná spausdintuvà, turi pateikti\n"
-"spausdintuvo hosto vardà ir, galbût, prievado numerá."
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "Spausdintuvo hosto vardas"
-
-#: ../../printerdrake.pm_.c:537
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Spausdintuvo hosto vardas"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Spausdintuvo árenginio URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Spausdintuvo vardas"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Apraðymas"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Vieta"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Skaitoma CUPS tvarkykliø duomenø  bazë"
-
-#: ../../printerdrake.pm_.c:793
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Spausdintuvo jungtis"
-
-#: ../../printerdrake.pm_.c:794
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Kokio tipo yra tavo spausdintuvas?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Modemo Nustatymai"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Interneto konfigûravimas"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Ar tu nori iðbandyti spausdinimà?"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "Patikrinti prievadus"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-#, fuzzy
-msgid "No test pages"
-msgstr "Taip, spausdinti abu bandomuosius puslapius"
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "Spausdintuvas"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standartinë"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Spausdinamas bandomasis puslapis..."
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "Spausdinamas bandomasis puslapis..."
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Spausdinamas bandomasis puslapis..."
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Bandomasis puslapis buvo nusiøstas spausdinimo demonui.\n"
-"Kol bus pradëta spausdinti, gali tekti palaukti.\n"
-"Spausdinimo bûsena:\n"
-"%s\n"
-"\n"
-"Ar jis veikia teisingai?"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Bandomasis puslapis buvo nusiøstas spausdinimo demonui.\n"
-"Kol bus pradëta spausdinti, gali tekti palaukti.\n"
-"Ar jis veikia teisingai?"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Spausdintuvo nëra"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Iðjungiamas tinklas"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "Spausdintuvo nuostatos"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Skaitoma CUPS tvarkykliø duomenø  bazë"
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Interneto konfigûravimas"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "Spausdintuvo nëra"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Skaitoma CUPS tvarkykliø duomenø  bazë"
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Nustatyti spausdintuvà"
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Iðbandoma jungtis..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Nustatyti tinklà"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitorius nenurodytas"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Konfigûruojamas tinklas"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Kurià spausdinimo sistemà nori naudoti?"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Aukðtas"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranojiðkas"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Kurià spausdinimo sistemà nori naudoti?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Pasirink spausdintuvo jungtá"
-
-#: ../../printerdrake.pm_.c:1728
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Kurià spausdinimo sistemà nori naudoti?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Nustatyti spausdintuvà"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Spausdintuvo nuostatos"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Skaitoma CUPS tvarkykliø duomenø  bazë"
-
-#: ../../printerdrake.pm_.c:1845
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Ar nori nustatyti spausdintuvà?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Normali"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Áprastas)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Nutolæs CUPS serveris"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "Nutolæs CUPS serveris"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-#, fuzzy
-msgid "Add printer"
-msgstr "Spausdintuvo nëra"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Ar tu nori iðbandyti nustatymus?"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Modemo Nustatymai"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Interneto jungties dalinimas"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Spausdintuvo jungtis"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "Spausdinamas bandomasis puslapis..."
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "Nutolæs spausdintuvas"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Skaitoma CUPS tvarkykliø duomenø  bazë"
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ar tu nori ið naujo paleisti tinklà"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Skaitoma CUPS tvarkykliø duomenø  bazë"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Proxy konfigûracija"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Prievadas"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Proxy turëtø bûti http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "Prievado numeris turi bûti skaièius"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Proxy turëtø bûti ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Automatinis pasisveikinimas"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Slaptaþodis"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Jokio slaptaþodþio"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Slaptaþodþiai nesutampa"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Negaliu pridëti skirsnio prie _formatuoto_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Negaliu áraðyti bylos %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid nepavyko"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid nepavyko (gal bût trûksta raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nëra pakankamai srièiø %d lygio RAID\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron yra periodinë komandø tvarkyklë."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd naudojamas akumuliatoriaus bûsenai stebëti ir uþraðyti per\n"
-"syslog. Jis taip pat gali bûti naudojamas kompiuterio iðjungti,\n"
-"kai trûksta energijos akumuliatoriuje."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Paleidþia komandas laiku, nurodytu su at komanda, bei paleidþia\n"
-"susikaupusias komandas tuomet, kai sistema maþai apkrauta."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron yra standartinë UNIX programa, paleidþianti vartotojo nurodytas "
-"programas\n"
-"periodiðkai, nustatytu laiku. vixie cron prideda nemaþai galimybiø prie "
-"paprasto\n"
-"UNIX cron'o, áskaitant didesná saugumà ir galingesnes parinktis."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM prideda pelës palaikymà tekstinëse Linux programose, pvz.\n"
-"Midnight Commander. Ji suteikia galimybæ konsolëje kopijuoti ir ádëti su\n"
-"pele, bei iðkviesti kontekstiná meniu."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache yra World Wide Web serveris. Jis naudojamas pateikti HTML\n"
-"byloms ir CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Interneto superserverio demonas (bendrai vadinamas inetd) paleidþia\n"
-"ávairias interneto paslaugas, kai reikia. Jis atsakingas uþ daugelio\n"
-"paslaugø paleidimà, áskaitant telnet, ftp, rsh ir rlogin. Inetd iðjungimas\n"
-"kartu iðjungia visas paslaugas, uþ kurias jis yra atsakingas."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ðis paketas uþkrauna pasirinktà klaviatûros iðdëstymà, kuris\n"
-"nurodytas /etc/sysconfig/keyboard byloje. Jis gali bûti pasirinktas su\n"
-"kbdconfig priemone. Daugumoje kompiuteriø jis turi bûti ájungtas."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd yra spausdinimo demonas, bûtinas, kad lpr veiktø tvarkingai.\n"
-"Tai yra tiesiog serveris, paskirstantis spausdinimo darbus spausdintuvui"
-"(ams)."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) yra Domenø vardø serveris (DNS), naudojamas\n"
-"iðsiaiðkinti IP adresus pagal hosto vardus."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Primontuoja ir numontuoja visas Network File System (NFS), SMB\n"
-"(Lan Manager/Windows), ir NCP (NetWare) montavimo taðkus."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Ájungia/Iðjungia visas tinklo jungtis, nustatytas paleisti\n"
-"ákrovos metu."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS yra populiarus protokolas dalintis byloms TCP/IP tinkluose.\n"
-"Ði tarnyba teikia NFS serverio funkcionalumà, kuris tvarkomas\n"
-"/etc/exports byloje."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS yra populiarus protokolas dalintis byloms TCP/IP tinkluose.\n"
-"Ði tarnyba teikia NFS bylø uþrakinimo funkcionalumà."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA skirtas palaikyti tokiems neðiojamø kompiuteriø árenginiams,\n"
-"kaip modemai ir tinklo plokðtës. Jis nebus paleidþiamas, jei nëra "
-"sutvarkytas,\n"
-"tad saugu palikti já net kompiuteriuose, kuriems jo nereikia."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper tvarko RPC jungtis, kurios naudojamos protokoluose,\n"
-"tokiuose kaip NFS bei NIS. portmap serveris turi bûti paleistas "
-"kompiuteriuose,\n"
-"kurie veikia kaip serveriai protokolø, naudojanèiø PS jungtis."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix yra paðto siuntimo agentas (MTA), tai yra programa,\n"
-"siunèianti paðtà ið vieno kompiuterio á kità."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Iðsaugo ir atkuria sistemos entropijos tvenkiná aukðtesnës kokybës\n"
-"atsitiktiniø skaièiø generavimui."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed demonas leidþia automatiðkai atnaujinti IP marðrutizavimo lenteles,\n"
-"naudojant RIP protokolà. RIP plaèiai naudojamas maþuose tinkluose, taèiau\n"
-"sudëtinguose tinkluose gali prireikti sudëtingesniø protokolø."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokolas leidþia tinklo vartotojams iðmatuoti\n"
-"vykdymo metrikas bet kuriam kompiuteriui ið tinklo."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokolas leidþia tinklo vartotojams suþinoti, kas yra\n"
-"prisijungæs prie kitø atsakinëjanèiø kompiuteriø."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokolas leidþia nutolusiems vartotojams gauti sàraðà\n"
-"vartotojø, prisijungusiø prie kompiuterio, kuriame veikia rwho demonas\n"
-"(panaðiai kaip finger)."
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Startuojant paleisti X_Windows"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog yra priemonë, kurià daugelis demonø naudoja uþraðyti\n"
-"log áraðams á ávairias sistemos log bylas.  Visada pravartu leisti syslog."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:88
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Paleidþia ir sustabdo X ðriftø serverá pakrovimo metu ir iðjungiant."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Pasirink kokias tarnybas ájungus paleisti automatiðkai"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "Spausdintuvas"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internetas"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "Sistemos reþimas"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Nutolusio lpd spausdintuvo nuostatos"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Serveris, Duomenø baziø"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "árenginys"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Dëmesio"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Pridurti"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Yaboot"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Ádiegiamas paketas %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Að negaliu perskaityti tavo skirsniø lentelës, ji man pernelyg sugadinta :(\n"
-"Pabandysiu iðvalyti blogus skirsnius"
-
-#: ../../standalone/drakautoinst_.c:44
-#, fuzzy
-msgid "Error!"
-msgstr "Klaida"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Konfigûracija po ádiegimo"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Ádiegimo Tipo Konfiguracija"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Sveikiname!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Interneto jungties dalinimas"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Interneto jungties dalinimas ðiuo metu ájungtas"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneto jungties dalinimas jau buvo sutvarkytas.\n"
-"Jis ðiuo metu ájungtas.\n"
-"\n"
-"Tai kà norëtum daryti?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "iðjungti"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "nieko"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "ið naujo nustatyti"
-
-#: ../../standalone/drakgw_.c:127
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "Ieðkoma áranga..."
-
-#: ../../standalone/drakgw_.c:135
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Interneto jungties dalinimas ðiuo metu iðjungtas"
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Interneto jungties dalinimas ðiuo metu iðjungtas"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneto jungties dalinimas jau buvo sutvarkytas.\n"
-"Jis ðiuo metu iðjungtas.\n"
-"\n"
-"Tai kà norëtum daryti?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "ájungti"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:161
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Interneto jungties dalinimas ðiuo metu ájungtas"
-
-#: ../../standalone/drakgw_.c:182
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Tavo kompiuteris gali bûti sutvarkytas taip, kad dalintøsi interneto "
-"jungtimi.\n"
-"\n"
-"Pastaba: tau reikia atskiros tinklo plokðtës, nustatytos vietiniam tinklui "
-"(LAN).\n"
-"\n"
-"Ar norëtum sutvarkyti interneto jungties dalinimà?"
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:209
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Interfeisas"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Tavo sistemoje nerasta jokia tinklo plokðtë!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Tavo sistemoje nerasta jokia tinklo plokðtë. praðom paleisti árangos "
-"nustatymo áranká."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Tinklo interfeisas"
-
-#: ../../standalone/drakgw_.c:225
-#, fuzzy, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Tavo sistemoje yra tik viena sutvarkyta tinklo plokðtë:\n"
-"\n"
-"%s\n"
-"\n"
-"Ar norëtum sutvarkyti savo vietiná tinklà ðiai plokðtei?"
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Praðom pasirinkti, kuri tinklo plokðtë bus prijungta prie vietinio tinklo."
-
-#: ../../standalone/drakgw_.c:243
-#, fuzzy
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Áspëju, ði tinklo plokðtë jau buvo sutvarkyta.\n"
-"Ar norëtum nustatyti jà ið naujo?"
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Rastas galimas LAN adreso konfliktas esamose %s nuostatose!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Aptikta ugniasienës konfigûracija!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Áspëjimas! Aptikta ugniasienës konfigûracija! Tau gali tekti kai kà "
-"iðtaisyti rankomis po ádiegimo."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Konfigûruojama..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Konfigûruojami skriptai, ádiegiamos programos, paleidþiami serveriai..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Yra problemø ádiegiant paketà %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Viskas buvo sukonfigûruota.\n"
-"Tu gali dabar dalintis interneto jungtimi su kitais kompiuteriais vietiniame "
-"tinkle, naudojant automatinæ tinklo konfigûracijà (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-#, fuzzy
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Interneto jungties dalinimas jau buvo sutvarkytas.\n"
-"Jis ðiuo metu iðjungtas.\n"
-"\n"
-"Tai kà norëtum daryti?"
-
-#: ../../standalone/drakgw_.c:618
-#, fuzzy
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"Interneto jungties dalinimas jau buvo sutvarkytas.\n"
-"Jis ðiuo metu ájungtas.\n"
-"\n"
-"Tai kà norëtum daryti?"
-
-#: ../../standalone/drakgw_.c:619
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Interneto jungties dalinimas ðiuo metu ájungtas"
-
-#: ../../standalone/drakgw_.c:624
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Interneto jungtis ir nustatymas"
-
-#: ../../standalone/drakgw_.c:631
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Interneto jungties dalinimas"
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Tinklo konfigûravimas (%d adapteris)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profailas: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Iðtrinti profailà..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Profailas iðtrynimui:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Naujas profailas..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Kompiuterio vardas:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Priëjimas prie Interneto"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Tipas: "
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Ðliuzas (Gateway):"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Interfeisas:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Bûsena:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-#, fuzzy
-msgid "Connected"
-msgstr "Sujungimas..."
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Nepajungtas"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Sujungimas..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-#, fuzzy
-msgid "Disconnect..."
-msgstr "Sujungimas..."
-
-#: ../../standalone/draknet_.c:215
-#, fuzzy
-msgid "Starting your connection..."
-msgstr "Iðbandoma jungtis..."
-
-#: ../../standalone/draknet_.c:223
-#, fuzzy
-msgid "Closing your connection..."
-msgstr "Iðbandoma jungtis..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "The system is now disconnected."
-msgstr "Sistema dabar prijungta prie interneto."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Nustatyti Priëjimà prie Internet..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "LAN konfiguravimas"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Tvarkyklë"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Interfeisas"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "Protocol"
-msgstr "Protokolas"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "State"
-msgstr "Bûsena:"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Nustatyti Vietiná Tinklà..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:325
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Nustatymø tikrinimas"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "LAN Konfiguravimas"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapteris %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Ákrovos Protokolas"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Startavo ákrovos metu"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP klientas"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "activate now"
-msgstr "Aktyvus"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "desactivate now"
-msgstr "Aktyvus"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Interneto jungties konfiguravimas"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Interneto Jungties Konfiguravimas"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Jungties tipas: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parametrai"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Ethernet Korta"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP klientas"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Sveiki atvykæ á cracker'iø ðalá"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Menkas"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranojiðkas"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ðiame lygyje reikia elgtis atsargiai. Tai leidþia lengviau naudoti sistemà,\n"
-"bet labai jautriai: ji turëtø nebûti naudojama kompiuteriuose,\n"
-"sujungtais su kitais arba prie Interneto. Èia nëra slaptaþodþiø."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Dabar slaptaþodþiai yra ájungti bet naudoti kaip tinkliná kompiuterá dar "
-"nerekomenduojama."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr "Ðiame saugumo lygyje yra daugiau perspëjimø ir saugumo patikrinimø."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Ðis saugumo lygis yra standartinis, rekomenduojamas kompiuteriui, kuris\n"
-"naudojamas prisijungti prie interneto kaip klientas. Nëra jokiø saugumo "
-"tikrinimø."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Su ðiuo saugumo lygiu sistemà jau galima naudoti kaip serverá. Saugumas\n"
-"yra pakankamai aukðtas, kad sistemà bûtø galima naudoti serveriui, kuris "
-"priima\n"
-"prisijungimus ið daugybës klientø."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Dabar naudojami 4 lygio privalumai,bet sistema yra visiðkai uþdaryta.\n"
-"Saugumo savybës yra maksimalios."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "Nustatomas saugumo lygis"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Pasirink serverio nuostatas"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Nustatomas saugumo lygis"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Prisijungti prie interneto"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Pasirink kurá áranká norëtum naudoti"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "vartosena: keyboarddrake [--expert] [klaviatûra]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Ar tu nori, kad BackSpace raðytø Delete konsolëje?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Pakeisk CD-ROM"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Praðom ákiðti Installation CD-ROM á kaupiklá ir paspausti Gerai, kai "
-"baigta.\n"
-"Jei tu jo neturi, paspausk mygtukà nutraukti, kad iðvengtum atnaujinimo."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "nepavyko paleisti gyvo atnaujinimo!!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "serial_usb nerasta\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Ar emuliuoti treèià klaviðà?"
-
-#: ../../standalone/tinyfirewall_.c:29
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Aptikta ugniasienës konfigûracija!"
-
-#: ../../standalone/tinyfirewall_.c:42
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Aptikta ugniasienës konfigûracija!"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Pasirink savo kalbà"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Parink ádiegimo klasæ"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Kieto disko nustatymas"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Pelës nustatymas"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Pasirink klaviatûrà"
-
-#: ../../steps.pm_.c:19
-#, fuzzy
-msgid "Security"
-msgstr "curly"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Nustatyti bylø sistemas"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Suþymëti skirsnius"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Pasirinkti paketus"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Ádiegti sistemà"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Pridëti vartotojà"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Nustatyti tinklà"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Nustatyti servisus"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Sukurti ákrovos diskelá"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Ádiegti ákrovos tvarkyklæ"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Nustatyti X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Iðeiti ið ádiegimo"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, fuzzy, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Adapteris %s: %s"
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Klaida atidarant %s áraðymui: %s"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Serveris, Tinklapiø/FTP"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Tinklo Kompiuteris, X klientas"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Biuras"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome darbo stotis"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Árankiai tavo Palm Pilot arba Visor"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "KDE darbo stotis"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Serveris, Firewall/Routeris"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Biuro programos: tekstø redaktoriai (kword, abiword), skaièiuoklës (kspread, "
-"gnumeric), pdf perþiûros programos ir pan."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Su garsu susijæ árankiai: mp3 ir midi grotuvai, mikðeriai ir pan."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knygos ir HOWTO apie Linux ir Free Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE darbo stotis"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "IceWM, Window Maker, Enlightenment, Fvwm ir pan."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedija - Vaizdas"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Árankiø rinkinys paðtui, naujienoms, þiniatinkliui, bylø siuntimui ir "
-"pokalbiams"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Serveris, Duomenø baziø"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Ar tu nori iðbandyti nustatymus?"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedija - Garsas"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Priemonës"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentacija"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsolës árankiai"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Interneto stotis"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedija stotis"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN Konfiguravimas"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Daugiau grafiniø darbalaukiø (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"The K Desktop Environment, pagrindinë grafinë aplinka su dideliu rinkiniu "
-"pritaikytø programø"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Development"
-msgstr "Kûrimo, Tinklapiø"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Árankiai kurti ir kepti CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Biuro darbo stotis"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm ir Pan."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafikos programos, tokios kaip The GIMP"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C bei C++ kûrimo bibliotekos, programos ir include bylos"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Serveris, Tinklo Kompiuterio serveris"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Serveris, Paðto/Grupinio darbo/Naujienø"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Þaidimø stotis"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Vaizdo grotuvai ir redaktoriai"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedija - grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-"Programos pasilinksminimui: lentos, strateginiai, kortø þaidimai ir pan."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Rinkinys árankiø skaityti ir siøsti paðtà bei naujienas (pine, mutt, tin) ir "
-"narðyti þiniatinklá (WWW)"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archyvavimas, emuliatoriai, stebëjimas"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Asmeniniai finansai"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafinë aplinka su vartotojui draugiðkø programø ir darbalaukio árankiø "
-"rinkiniu"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Priëjimas prie Interneto"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Garso ir vaizdo grojimo/redagavimo programos"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Kiti grafiniai darbalaukiai"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Redaktoriai, shell'ai, bylø árankiai, terminalai"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programos, skirtos tvarkyti tavo finansus, pvz. gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Þaidimai"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Asmeninës informacijos tvarkyklë (PIM)"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedija - CD kepimas"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Mokslinës darbo stotis"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "negaliu atidaryti /etc/sysconfig/autologin skaitymui: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Ar tu nori ið naujo paleisti tinklà"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Ar tu sutinki?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Ruoðiamasi ið naujo paleisti tinklo árenginá:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Ruoðiamasi ið naujo ájungti tinklo árenginá %s. Ar tu sutinki?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Nebent tu tiksliai þinai kità variantà, áprastas pasirinkimas bûna \"/dev/"
-#~ "hda\"\n"
-#~ "(tai yra pirminis pagrindinis IDE kaupiklis) arba \"/dev/sda\" (pirmas "
-#~ "SCSI diskas)."
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Èia yra ðios spausdinimo eilës.\n"
-#~ "Tu gali èia pridëti daugiau arba pakeisti esamas."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Jungties tipas: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Pasirink áprastà vartotojà:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Praðom iðbandyti pelæ"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Pasirink norimà kalbà ádiegimui ir sistemos vartojimui"
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Tu turi sutikti su aukðèiau esanèios licenzijos sàlygomis, kad tæstum "
-#~ "ádiegimà.\n"
-#~ "\n"
-#~ "\n"
-#~ "Praðom spausti ¥Sutinku´, jei sutinki su jos sàlygomis.\n"
-#~ "\n"
-#~ "\n"
-#~ "Praðom spausti ¥Atmetu´, jei nesutinki su jos sàlygomis.\n"
-#~ "Ádiegimas bus nutrauktas, nekeièiant esamos konfigûracijos."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Pasirink norimà klaviatûros iðdëstymà ið sàraðo aukðèiau"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Jei nori, kad kitos kalbos (be tos, kurià nurodei ádiegimo pradþioje)\n"
-#~ "bûtø prieinamos ádiegus sistemà, pasirink jas ið aukðèiau esanèio\n"
-#~ "sàraðo. Jei nori visø, tiesiog spausk ¥Visos´."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Pasirink:\n"
-#~ "\n"
-#~ "  - Prisitaikyta: Jeigu esi pakankamai paþástamas su GNU/Linux, galësi "
-#~ "pasirinkti pagrindinæ sistemos paskirtá. Þiûrëk þemiau dël smulkmenø.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Eksperto: Jeigu tau puikiai sekasi su GNU/Linux, ir nori smarkiai "
-#~ "prisitaikyti \n"
-#~ "    ádiegimà. Kaip ir ¥Prisitaikytoje´ klasëje, tu galësi pasirinkti "
-#~ "pagrindinæ \n"
-#~ "    sistemos paskirtá. Bet, labai praðau, NESIRINK ÐITO, NEBENT TIKRAI "
-#~ "ÞINAI, KÀ DARAI!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Tu turi apibrëþti, kam maðina bus naudojama. Pasirinkimai yra:\n"
-#~ "\n"
-#~ "* Darbo stotis: tai geriausias pasirinkimas, jei ruoðiesi maðinà naudoti "
-#~ "daugiausiai kasdieniams darbams,\n"
-#~ "  ástaigoje ar namie.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Kûrimo: jei ruoðiesi ðià maðinà naudoti daugiausiai programinës árangos "
-#~ "kûrimui, tai geras pasirinkimas. Tu\n"
-#~ "  tada turësi ádiegtà pilnà rinkiná programø, skirtø kompiliuoti, derinti "
-#~ "ir formatuoti iðeities tekstus, bei kurti\n"
-#~ "  programø paketus.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Serveris: jei ruoðiesi naudoti ðià maðinà naudoti kaip serverá, tai "
-#~ "geras pasirinkimas. Tiek bylø serverá\n"
-#~ "  (NFS arba SMB), tiek spausdinimo serverá (Unix ar Microsoft Windows "
-#~ "stiliaus), autentikacijos (NIS),\n"
-#~ "  duomenø bazës serverá ir pan. Jei taip, nesitikëk, kad bus ádiegti "
-#~ "visokie graþumai (KDE, GNOME. etc.)"
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Tu dabar gali pasirinkti grupæ paketø, kuriuos nori ádiegti\n"
-#~ "ar atnaujinti.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX tada patikrins, ar yra pakankamai vietos ádiegti juos visus. Jei "
-#~ "ne,\n"
-#~ "perspës tave apie tai. Jei vis tiek norësi tæsti, pasirinktø grupiø "
-#~ "ádiegimas\n"
-#~ "bus pratæstas, taèiau kai kurie maþiau naudingi paketai bus iðmesti. "
-#~ "Sàraðo\n"
-#~ "pabaigoje tu gali pasirinkti variantà \"Atskirø paketø pasirinkimas\", "
-#~ "tuo atveju\n"
-#~ "tu galësi narðyti po daugiau nei 1000 paketø ir pasirinkti juos po "
-#~ "vienà..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Dabar tu gali pasirinkti po vienà paketus, kuriuos\n"
-#~ "nori ádiegti\n"
-#~ "\n"
-#~ "\n"
-#~ "Tu gali iðskleisti ir suskleisti medá, spragtelëdamas mygtukus "
-#~ "kairiajame\n"
-#~ "apatiniame paketø lango kampe.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei labiau norëtum matyti paketus surikiuotus pagal abëcëlæ, spragtelëk "
-#~ "ant\n"
-#~ "ikonos \"Perjungti tarp rikiavimo pagal grupes ar abëcëlæ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei nenori, kad tave áspëtø apie priklausomybes, spragtelëk ant\n"
-#~ "\"Tyliai patenkinti priklausomybes\". Jei taip padarysi, nepamirðk, kad "
-#~ "atþymëjus\n"
-#~ "vienà paketà, gali bûti atþymëti keletas kitø, kurie nuo jo priklauso."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Jei turi visus CD ið aukðèiau esanèio sàraðo, spausk Gerai.\n"
-#~ "Jei neturi në vieno ið ðiø CD, spausk Nutraukti.\n"
-#~ "Jei trûksta tik kai kuriø CD, atþymëk juos ir tada spausk Gerai."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Jei tu nori prijungti savo kompiuterá prie interneto arba\n"
-#~ "vietinio tinklo, pasirink teisingà variantà. Praðom ájungti árenginá "
-#~ "prieð\n"
-#~ "pasirenkant teisingà variantà -- tai leis DrakX automatiðkai já "
-#~ "atpaþinti.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei tu neturi galimybës prisijungti nei prie interneto, nei prie vietinio "
-#~ "tinklo,\n"
-#~ "rinkis \"Iðjungti tinklà\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei nori sutvarkyti tinklà vëliau, baigus ádiegimà, arba jei jau baigei\n"
-#~ "konfigûruoti savo tinklo jungtis, rinkis \"Atlikta\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Nebuvo aptiktas joks modemas. Praðom pasirinkti nuosekløjá prievadà,\n"
-#~ "prie kurio jis yra prijungtas.\n"
-#~ "\n"
-#~ "Þinok, kad pirmasis nuoseklusis prievadas (COM1 MS Windows'uose)\n"
-#~ "vadinamas ttyS0 Linux'e."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Tu dabar gali ávesti prisiskambinimo nuostatas. Jei tu\n"
-#~ "neþinai arba nesi tikras, kà ávesti, teisingà informacijà gali gauti ið "
-#~ "savo\n"
-#~ "Interneto paslaugø tiekëjo (IPT). Jei tu neávesi DNS (vardø serverio)\n"
-#~ "informacijos èia, ji bus gauta ið Interneto paslaugø tiekëjo jungimosi "
-#~ "metu."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Jei tavo modemas yra iðorinis, praðom ájungti já dabar, kad DrakX galëtø "
-#~ "atpaþinti já automatiðkai."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Praðau, ájunk savo modemà ir pasirink teisingà."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Jei tu nesi tikras, ar aukðèiau pateikta informacija yra teisinga,\n"
-#~ "arba tiksliai neþinai, kà ávesti, teisingà informacijà gali gauti ið "
-#~ "savo\n"
-#~ "Interneto paslaugø tiekëjo (IPT). Jei tu neávesi DNS (vardø serverio)\n"
-#~ "informacijos èia, ji bus gauta ið Interneto paslaugø tiekëjo jungimosi "
-#~ "metu."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Tu dabar gali ávesti savo hosto vardà, jei to reikia. Jei tu\n"
-#~ "neþinai arba nesi tikras, kà ávesti, teisingà informacijà gali gauti ið "
-#~ "savo\n"
-#~ "Interneto paslaugø tiekëjo (IPT)."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Tu dabar gali sutvarkyti savo tinklo árenginá:\n"
-#~ "\n"
-#~ "   * IP adresas: jeigu jo neþinai, arba nesi tikras kà ávesti, pasiklausk "
-#~ "savo tinklo administratoriaus.\n"
-#~ "     Tu turëtum neávesti IP adreso, jei pasirenki \"Automatinis IP\" "
-#~ "þemiau.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" daþniausiai yra neblogas pasirinkimas. "
-#~ "Jeigu neþinai, arba nesi tikras\n"
-#~ "     kà ávesti, pasiklausk savo tinklo administratoriaus.\n"
-#~ "\n"
-#~ "   * Automatinis IP: Jeigu tavo tinkle naudojamas BOOTP ar DHCP "
-#~ "protokolas, pasirink ðá variantà.\n"
-#~ "     Jeigu pasirinksi já, nereikës nieko áraðyti prie \"IP adreso\". "
-#~ "Jeigu tu neþinai, arba nesi tikras, ar reikia\n"
-#~ "     pasirinkti ðá variantà, pasiklausk tinklo administratoriaus."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Tu dabar gali ávesti savo hosto vardà. Jeigu jo neþinai,\n"
-#~ "arba nesi tikras kà ávesti, pasiklausk savo tinklo administratoriaus."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Tu dabar gali ávesti savo hosto vardà, jei to reikia. Jei tu neþinai\n"
-#~ "arba nesi tikras, kà ávesti, palik tuðèia."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Dabar tu gali ávesti prisiskambinimo nuostatas. Jeigu tu gerai neþinai,\n"
-#~ "kà áraðyti, teisingà informacijà gali gauti ið savo ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Jeigu tu naudosi proxy, praðom dabar juos nustatyti. Jeigu tu dar "
-#~ "neþinai,\n"
-#~ "ar turëtum naudoti proxy, pasiklausk tinklo administratoriaus arba ISP."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Dabar tu gali ádiegti kriptografijos paketà, jeigu tavo interneto juntis "
-#~ "buvo\n"
-#~ "gerai sutvarkyta. Pradþiai pasirink atvaizdá (mirror), ið kurio parsiøsti "
-#~ "paketus,\n"
-#~ "o po to paþymëk, kuriuos paketus ádiegti.\n"
-#~ "\n"
-#~ "Atmink, kad tu turi pasirinkti atvaizdá ir kriptografijos paketus, "
-#~ "atitinkanèius\n"
-#~ "ástatymø reikalavimus."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr ""
-#~ "Tu dabar gali pasirinkti laiko juostà, priklausomai nuo to, kur gyveni."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Tu gali sukonfigûruoti vietiná spausdintuvà (prijungtà prie tavo "
-#~ "kompiuterio) arba\n"
-#~ "nutolusá spausdintuvà (prieinamà per Unix, Netware arba Microsoft Windows "
-#~ "tinklà)"
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "jei tu nori spausdinimo galimybës, praðom dabar pasirinkti vienà "
-#~ "spausdinimo\n"
-#~ "sistemà ið CUPS ir LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS yra nauja, galinga ir lanksti spausdinimo sistema Unix sistemoms "
-#~ "(CUPS\n"
-#~ "reiðkia \"Common Unix Printing System\"). Tai yra spausdinimo sistema,\n"
-#~ "Mandrake Linux parenkama pagal nutylëjimà.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR yra sena spausdinimo sistema, naudota ankstesnëse Mandrake Linux\n"
-#~ "versijose.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei tu neturi spausdintuvo, pasirink \"Jokia\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux gali susitvarkyti su dauguma spausdintuvø tipø. Kiekvienas ið\n"
-#~ "ðiø tipø reikalauja skirtingo nustatymo.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei tavo spausdintuvas yra fiziðkai prijungtas prie tavo kompiuterio,\n"
-#~ "pasirink \"Vietinis spausdintuvas\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei nori prieiti prie spausdintuvo, kuris yra nutolusioje Unix "
-#~ "sistemoje,\n"
-#~ "pasirink \"Nutolæs spausdintuvas\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei nori prieiti prie spausdintuvo, kuris yra nutolusiame Microsoft "
-#~ "Windows\n"
-#~ "kompiuteryje (arba Unix kompiuteryje, naudojanèiame SMB protokolà), "
-#~ "pasirink\n"
-#~ "\"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Praðau, ájunk savo spausdintuvà prieð leisdamas DrakX já atpaþinti.\n"
-#~ "\n"
-#~ "Tu dabar turi ávesti ðiek tiek informacijos.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Spausdintuvo vardas: spausdinimo kaupykla (spooler) naudoja \"lp\" "
-#~ "kaip áprastà spausdintuvo vardà. Taigi,\n"
-#~ "     tu turi turëti spausdintuvà, pavadintà \"lp\". Jei turi tik vienà "
-#~ "spausdintuvà, gali jam parinkti keletà vardø. Tu \n"
-#~ "     tiesiog turi atskirti juos staèiu brûkðniu (\"|\"). Taigi, jei "
-#~ "patiktø prasmingesnis vardas, tu turi já áraðyti pirmà,\n"
-#~ "     pvz. \"Mano spausdintuvas|lp\". Spausdintuvas, kurio varde yra \"lp"
-#~ "\", bus parenkamas pagal nutylëjimà.\n"
-#~ "\n"
-#~ "\n"
-#~ "    * Apraðymas: jis nebûtinas, bet gali bûti naudingas, jei prie "
-#~ "kompiuterio yra prijungti keli spausdintuvai arba\n"
-#~ "     leidþiama kitiems kompiuteriams prieiti prie ðio spausdintuvo.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Vieta: jei nori áraðyti ðiek tiek informacijos apie tai, kur tas "
-#~ "spausdintuvas yra, áraðyk já èia (gali raðyt\n"
-#~ "     kà tik nori, pavyzdþiui \"ant boso stalo\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Tu dabar turi ávesti ðiek tiek informacijos.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Spausdintuvo vardas: spausdinimo kaupykla (spooler) naudoja \"lp\" "
-#~ "kaip áprastà spausdintuvo vardà.\n"
-#~ "     Taigi, tu turi turëti spausdintuvà, pavadintà \"lp\". Jei turi tik "
-#~ "vienà spausdintuvà, gali jam parinkti keletà\n"
-#~ "     vardø. Tu tiesiog turi atskirti juos staèiu brûkðniu (\"|\"). Taigi, "
-#~ "jei patiktø prasmingesnis vardas, tu turi já\n"
-#~ "     áraðyti pirmà, pvz. \"Mano spausdintuvas|lp\". Spausdintuvas, kurio "
-#~ "varde yra \"lp\", bus parenkamas\n"
-#~ "     pagal nutylëjimà.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Kaupimo (spool) katalogas: tai katalogas, á kurá áraðomi spausdinimo "
-#~ "darbai. Palik áprastà parinktá,\n"
-#~ "     jeigu neþinai kà naudoti.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Spausdintuvo jungtis: jei tavo spausdintuvas yra fiziðkai prijungtas "
-#~ "prie tavo kompiuterio, rinkis\n"
-#~ "     \"Vietinis spausdintuvas\". Jie nori prieiti prie spausdintuvo, "
-#~ "prijungto prie nutolusio Unix kompiuterio,\n"
-#~ "     pasirink \"Nutolæs lpd spausdintuvas\".\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "     Jei nori prieiti prie spausdintuvo, kuris yra nutolusiame Microsoft "
-#~ "Windows kompiuteryje (arba\n"
-#~ "     Unix kompiuteryje, naudojanèiame SMB protokolà), pasirink \"SMB/"
-#~ "Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Jie nori prieiti prie spausdintuvo, esanèio Netware tinkle, pasirink "
-#~ "\"Netware\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Tavo spausdintuvas nebuvo atpaþintas. Praðom ávesti pavadinimà "
-#~ "árenginio,\n"
-#~ "prie kurio jis yra prijungtas.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tavo þiniai, dauguma spausdintuvø bûna prijungti prie pirmos "
-#~ "lygiagreèiosios jungties.\n"
-#~ "Tai vadinama \"/dev/lp0\" GNU/Linux sistemose, ir \"LPT1\" Microsoft "
-#~ "Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Tu dabar turi pasirinkti savo spausdintuvà ið sàraðo aukðèiau."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Praðom pasirinkti teisingas nuostatas, priklausomai nuo spausdintuvo.\n"
-#~ "Pasiþiûrëk á dokumentacijà, jeigu neþinai, kà èia ávesti.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tu galësi iðbandyti nustatymus sekanèiame þingsnyje, ir sugráþæs vël juos "
-#~ "pakeisti,\n"
-#~ "jeigu neveikia taip, kaip tu norëtum."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Dabar tu gali ávesti savo Mandrake Linux sistemos root slaptaþodá.\n"
-#~ "Slaptaþodis turi bûti ávestas du kartus patikrinimui, kad abu áraðai "
-#~ "sutampa.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root yra sistemos administratorius ir vienintelis vartotojas, kuriam "
-#~ "leidþiama\n"
-#~ "konfigûruoti sistemà. Taigi, slaptaþodá pasirink atsargiai. Neteisëtas "
-#~ "root\n"
-#~ "vartojimas gali bûti ypatingai pavojingas ðiai sistemai, duomenims joje "
-#~ "ir kitoms,\n"
-#~ " su ja susijusioms sistemoms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Slaptaþodis turi bûti raidþiø ir skaièiø miðinys, maþiausiai 8 simboliø\n"
-#~ "ilgio. Jis turëtø niekada nebûti uþraðytas ant popieriaus.\n"
-#~ "\n"
-#~ "\n"
-#~ "Nepasidaryk slaptaþodþio pernelyg ilgo ir sudëtingo: tu turëtum já "
-#~ "prisiminti\n"
-#~ "be ypatingø pastangø."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Dabar tu gali sukurti vienà arba daugiau \"paprastø\" vartotojø.\n"
-#~ "Kiekvienam þmogui, kuriam tu nori leisti naudotis ðiuo kompiuteriu,\n"
-#~ "tu gali sukurti vienà ar daugiau sàskaitø (account). Atmink, kad\n"
-#~ "kiekvienas vartotojas turës savus nustatymus (grafinës aplinkos,\n"
-#~ "programø nuostatas, ir t.t. ), bei savo \"namø katalogà\", kuriame\n"
-#~ "tie nustatymai bus laikomi.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pirmiausia, sukurk vartotojà sau paèiam! Net jeigu tu bûsi vienintelis "
-#~ "ðio\n"
-#~ "kompiuterio vartotojas, tu NEGALI prisijungti kaip root vartotojas "
-#~ "sistemos\n"
-#~ "kasdieniam naudojimui: taip iðkiltø didelë saugumo grësmë. Kad padarytum\n"
-#~ "sistemà nebeámanomà naudoti, uþtenka padaryti porà klaidø.\n"
-#~ "\n"
-#~ "\n"
-#~ "Todël, tu turëtum prisijungti prie sistemos, naudodamasis vartotojo "
-#~ "sàskaita,\n"
-#~ "kurià bûsi èia sukûræs, o pasisveikinti kaip root tik administravimo ar\n"
-#~ "prieþiûros darbams."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Sukurti ákrovos diskelá labai rekomenduojama. Jei tau nepavyktø\n"
-#~ "ákrauti kompiuterio, tai vienintelis bûdas iðgelbëti sistemà jos\n"
-#~ "nediegiant ið naujo."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Pagrindinës LILO bei GRUB nuostatos yra ðios:\n"
-#~ "  - Ákrovos árenginys: Nurodo árenginá (pvz. disko skirsná), kuriame\n"
-#~ "yra ákrovos sektorius. Pasirink \"/dev/hda\", nebent þinai tiksliai "
-#~ "kitaip.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pauzë prieð ákeliant áprastà atvaizdá (image): Nurodo deðimtøjø\n"
-#~ "sekundës daliø kieká, kiek reikia palaukti, prieð paleidþiant pirmà "
-#~ "atvaizdá.\n"
-#~ "Tai naudinga sistemoms, kurios kraunasi iðkart po klaviatûros ájungimo.\n"
-#~ "Ákrovos tvarkyklë nelaukia, jeigu \"pauzë\" yra nenurodyta arba lygi "
-#~ "nuliui.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Vaizdo reþimas: Tai nurodo  VGA reþimà, pasirenkamà paleidþiant.\n"
-#~ "Yra galimos ðios reikðmës:\n"
-#~ "\n"
-#~ "    * normal: pasirinkti standartiná 80x25 tekstiná reþimà.\n"
-#~ "\n"
-#~ "    * <skaièius>: naudoti atitinkamà tekstiná reþimà."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO yra ákrovos tvarkyklë SPARC'ams: ji gali ákrauti\n"
-#~ "tiek GNU/Linux, tiek bet kokià kità operacijø sistemà, esanèià\n"
-#~ "kompiuteryje. Paprastai tos kitos operacijø sistemos yra teisingai\n"
-#~ "atpaþástamos ir ádiegiamos. Jeigu ne, tu gali pridëti áraðus pats ðiame\n"
-#~ "lange. Bûk atidus ir pasirink teisingus parametrus.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tu taip pat gali uþdrausti priëjimà prie tø kitø operacijø sistemø\n"
-#~ "bet kam, jei iðtrinsi atitinkamus áraðus. Bet tuo atveju, tau prireiks\n"
-#~ "ákrovos diskelio, kad jas ákrautum!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Pagrindinës SILO nuostatos yra ðios:\n"
-#~ "  - Ákrovos tvarkyklës ádiegimas: Parodo, kur tu nori padëti "
-#~ "informacijà,\n"
-#~ "reikalingà ákrauti GNU/Linux. Pasirink \"Pirmasis kaupiklio sektorius "
-#~ "(MBR)\",\n"
-#~ "nebent þinai tiksliai kitaip.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pauzë prieð ákeliant áprastà atvaizdá (image): Nurodo deðimtøjø\n"
-#~ "sekundës daliø kieká, kiek reikia palaukti, prieð paleidþiant pirmà "
-#~ "atvaizdá.\n"
-#~ "Tai naudinga sistemoms, kurios kraunasi iðkart po klaviatûros ájungimo.\n"
-#~ "Ákrovos tvarkyklë nelaukia, jeigu \"pauzë\" yra nenurodyta arba lygi "
-#~ "nuliui."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Atëjo laikas sukonfigûruoti X Window sistemà, kuri yra GNU/Linux GUI\n"
-#~ "(Grafinës vartotojo sàsajos) pagrindas. Kad tai padarytum, tau\n"
-#~ "reikia sukonfigûruoti vaizdo plokðtæ bei monitoriø. Dauguma þingsniø\n"
-#~ "yra automatizuoti, ir tavo darbas gal bût bus tik patikrinti, kas buvo\n"
-#~ "atlikta, ir pritarti nuostatoms :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Kai konfigûravimas bus baigtas, bus paleisti X'ai (nebent papraðysi\n"
-#~ "DrakX, kad to nedarytø) tam, kad galëtum patikrinti ir pamatytum,\n"
-#~ "ar nuostatos tau tinka. Jeigu ne, tu gali sugráþti ir pakeisti jas,\n"
-#~ "tiek kartø, kiek reikës."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Jeigu kas nors su X konfigûracija yra netvarkoje, naudok ðias parinktis\n"
-#~ "teisingai nustatyti X Window sistemai."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Jeigu tu nori pasisveikinti grafiniam reþime, pasirink \"Taip\".\n"
-#~ "Kitu atveju rinkis \"Ne\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Tavo sistemà ruoðiamasi perkrauti.\n"
-#~ "\n"
-#~ "Po perkrovimo tavo naujoji Mandrake Linux sistema bus ákrauta\n"
-#~ "automatiðkai. Jeigu nori pakrauti kità operacijø sistemà, praðom\n"
-#~ "perskaityti papildomas instrukcijas."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Èekø (Programuotojo)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovakø (Programuotojo)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Kuriamo profailo vardas:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Áraðyti /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "Atstatyti ið bylos"
-
-#~ msgid "Save in file"
-#~ msgstr "Iðsaugoti á bylà"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Atstatyti ið diskelio"
-
-#~ msgid "Format all"
-#~ msgstr "Suþymëti visus skirsnius"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Suþymëjus visus skirsnius,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "visi duomenys, esantys ðiuose skirsniuose, bus prarasti"
-
-#~ msgid "Reload"
-#~ msgstr "Vël ákelti"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Ar tu nori sukurti automatinio ádiegimo diskelá Linux dauginimui?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL nustatymas"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Su nutolusiu CUPS serveriu, tau ðioje vietoje nereikia nustatinëti\n"
-#~ "jokiø spausdintuvø; jie bus automatiðkai atpaþástami,\n"
-#~ "nebent tu turi serverá, kuris yra kitame tinkle; tuomet turi áraðyti\n"
-#~ "CUPS serverio IP adresà ir galbût  prievado numerá."
-
-#~ msgid "Remote queue"
-#~ msgstr "Nutolusi eilë"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Nutolusi eilë"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Domeno vardas"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Spausdintuvo nëra"
-
-#, fuzzy
-#~ msgid "start it"
-#~ msgstr "grieþta"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "Tinklo konfigûravimas"
-
-#~ msgid "Profile "
-#~ msgstr "Profailas "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Jungties tipas: "
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "Prisijungti prie interneto"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Atsijungti nuo interneto"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Atsijungti nuo interneto"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Atsijungti nuo interneto"
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "Jungties pavadinimas"
-
-#, fuzzy
-#~ msgid "Color configuration"
-#~ msgstr "Nustatymai"
-
-#, fuzzy
-#~ msgid "average"
-#~ msgstr "iðkraipymai"
-
-#, fuzzy
-#~ msgid "Connect"
-#~ msgstr "Sujungimas..."
-
-#, fuzzy
-#~ msgid "Disconnect"
-#~ msgstr "Sujungimas..."
-
-#~ msgid "/File/_New"
-#~ msgstr "/Byla/_Nauja"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>N"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/Byla/Atidaryti"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>O"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/Byla/Uþraðyti"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/Byla/Uþraðyti Kaip"
-
-#~ msgid "/File/-"
-#~ msgstr "/Byla/-"
-
-#~ msgid "/_Options"
-#~ msgstr "/Pasirinktys"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/Pasirinkys/Bandymas"
-
-#~ msgid "/_Help"
-#~ msgstr "/Pagalba"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/Pagalba/_Apie..."
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Áprastas"
-
-#~ msgid "Europe"
-#~ msgstr "Europa"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "Paðalinti eilæ"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Nuostatø bylos turinio nepavyko suprasti."
-
-#~ msgid "Adapter"
-#~ msgstr "Adapteris"
-
-#~ msgid "Disable network"
-#~ msgstr "Uþdrausti tinklà"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Uþdrausti tinklà"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Tu dabar gali iðbandyti savo pelæ. Naudok klaviðus ir ratukà,\n"
-#~ "kad patikrintum ar nuostatos geros. Jei ne, spausk ¥Nutraukti´\n"
-#~ "ir pasirink kità tvarkyklæ."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (arba ADSL) jungtis"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Pelë"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Tu gali tiesiog áraðyti URI, kad prieitum prie spausdintuvo su CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Taip, spausdinti ASCII bandomàjá puslapá"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Taip, spausdinti PostScript bandomàjá puslapá"
-
-#~ msgid "Paper Size"
-#~ msgstr "Lapo dydis"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Ar iðstumti lapà po darbo?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint tvarkyklës nuostatos"
-
-#~ msgid "Color depth options"
-#~ msgstr "Spalvø gylio nuostatos"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Spausdinti tekstà kaip PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Taisyti stair-stepping tekstà?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Puslapiø skaièius vienam iðvesties puslapiui"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Kairysis/Deðinysis kraðtai taðkais (1/72 colio)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Virðutinis/Apatinis kraðtas taðkais (1/72 colio)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Papildomos GhostScript nuostatos"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Papildomos teksto nuostatos"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Atbulinë puslapiø seka"
-
-#~ msgid "CUPS starting"
-#~ msgstr "CUPS paleidþiamas"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Pasirink nutolusio spausdintuvo jungtá"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Kiekviena spausdinimo eilë turi turëti pavadinimà (pavyzdþiui, lp).\n"
-#~ "Gali bûti nurodyti kiti parametrai, tokie kaip spausdintuvo apraðymas\n"
-#~ "ar jo vieta. Koks ðio spausdintuvo vardas ir kaip jis yra prijungtas?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Kiekviena spausdinimo eilë (á kurià nukreipiami spaudiniai) turi turëti\n"
-#~ "pavadinimà (daþniausiai lp) ir kaupimo katalogà, susietà su ja. Koks "
-#~ "pavadinimas\n"
-#~ "bei katalogas turëtø bûti naudojami ðiai eilei, ir kaip yra prijungtas "
-#~ "spausdintuvas?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Eilës pavadinimas"
-
-#~ msgid "Spool directory"
-#~ msgstr "Kaupimo katalogas"
-
-#~ msgid "Disable"
-#~ msgstr "Iðjungti"
-
-#~ msgid "Enable"
-#~ msgstr "Ájungti"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Norëdamas padaryti sistemà saugesne, pasirink \"Naudoti ðeðëlinæ bylà\" "
-#~ "ir\n"
-#~ "\"Naudoti MD5 slaptaþodþius\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Jeigu tavo tinklas naudoja NIS, pasirink \"Naudoti NIS\". Jeigu\n"
-#~ "neþinai, paklausk tinklo administratoriaus."
-
-#~ msgid "yellow pages"
-#~ msgstr "geltonieji puslapiai"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "LAN konfiguravimas"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Tiekëjo DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Tiekëjo DNS 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Kaip tu nori prisijungti prie interneto?"
-
-#, fuzzy
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "LAN konfiguravimas"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Pasirink bylà"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Iðbandoma jungtis..."
-
-#~ msgid "Configure..."
-#~ msgstr "Konfigûruojama..."
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Nustatymai: Pridëti suradimo vietà"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Ðis paleidimo skriptas bando ákelti tavo USB pelës modulius."
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Ákrovos stiliaus konfigûracija"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Dabar, kai prisijungimas prie interneto yra sukonfigûruotas,\n"
-#~ "tavo kompiuteris gali bûti sutvarkytas dalintis ðia interneto jungtimi.\n"
-#~ "Pastaba: reikia turëti atskirà tinklo plokðtæ, per kurià bûtø prijungtas\n"
-#~ "vietinis tinklas (LAN).\n"
-#~ "\n"
-#~ "Ar norëtum sutvarkyti interneto jungties dalinimàsi?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Tyliai patenkinti priklausomybes"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Nustatyti LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Sukurti ákrovos diskelá"
-
-#~ msgid "Format floppy"
-#~ msgstr "Suþymëti diskelá"
-
-#~ msgid "Choice"
-#~ msgstr "Pasirinkimas"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "horizontali graþiai atrodanti aurora"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "vertikali tradicinë aurora"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitorius"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Dabar tu gali pasirinkti ávairias savo sistemos nuostatas.\n"
-#~ "\n"
-#~ "* Naudoti diskinio kaupiklio optimizacijas: ði nuostata gali padidinti "
-#~ "kietojo disko spartà, bet\n"
-#~ "skirta naudoti tik\n"
-#~ "  patyrusiems vartotojams. kai kurie lustai su klaidomis gali sugadinti "
-#~ "tavo duomenis, taigi bûk atsargus.\n"
-#~ "  Branduolys turi sàraðà blogø árenginiø, taèiau jei nori iðvengti "
-#~ "nemaloniø siurprizø, palik ðià nuostatà iðjungtà.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Pasirinkti saugumo lygá: tu gali pasirinkti sistemos saugumo lygá.\n"
-#~ "  Plaèiau apie tai skaityk pateiktuose apraðymuose. Paprasèiausiai, jei "
-#~ "neþinai kà pasirinkti, palik\n"
-#~ "  áprastà variantà.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Tikslus RAM atminties kiekis: deja, nëra standartinio bûdo, kaip "
-#~ "uþklausti BIOS, kiek kompiuteryje yra RAM atminties.\n"
-#~ "  Dël ðios prieþasties, Linux'ui gali nepavykti atpaþinti tikslaus RAM "
-#~ "kiekio. Tokiu atveju tau reikia\n"
-#~ "  nurodyti teisingà jos kieká. Atmink, kad 2 ar 4 MB skirtumas tarp "
-#~ "atpaþintos ir esamos atminties yra normalus.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Iðimamø laikmenø automatinis montavimas: jeigu tu nenori montuoti "
-#~ "iðimamø laikmenø (CD, diskeliø, Zip ir pan.)\n"
-#~ "  rankiniu bûdu, raðydamas \"mount\" ir \"umount\" paþymëk ðià parinktá.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Iðvalyti \"/tmp\", kiekvienà kartà ákrovus: jei nori iðtrinti visas "
-#~ "bylas ir katalogus, esanèius \"/tmp\", ákrovos metu,\n"
-#~ "  paþymëk ðià parinktá.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Ákrovos metu ájungti Num Lock: jei nori, kad NumLock bûtø ájungtas "
-#~ "ásikrovus sistemai, paþymëk ðià parinktá.\n"
-#~ "  Atkreipk dëmesá á tai, kad neturëtum to ájungti neðiojamuose "
-#~ "kompiuteriuose, ir kad X'uose NumLock gali veikti arba neveikti."
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr "Atleiskite, bet paðto konfiguracija dar nepadaryta. Bûkite kantrûs."
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "Sveiki atvykæ pas Tinklo Konfiguravimo Meistrà.\n"
-#~ "Kokius komponentus norite konfiguruoti?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Internet/Tinklo priëjimas"
-
-#, fuzzy
-#~ msgid "Firewall Configuration Wizard"
-#~ msgstr "Tinklo Konfigûravimo Meistras"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Ávairûs"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Ávairûs klausimai"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Negalima naudoti supermount su aukðtu saugumo lygiu"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "dëmesio: ÐIAME SAUGUMO LYGYJE, ROOT'ui NELEIDÞIAMA PASISVEIKINTI "
-#~ "KONSOLËJE!\n"
-#~ "jei nori tapti root, turi pasisveikinti kaip vartotojas, o tada naudoti "
-#~ "¥su´.\n"
-#~ "Bendriau paëmus, nemanyk savo kompiuterio naudoti kam nors kitam, nebent "
-#~ "serveriui.\n"
-#~ "Tu buvai áspëtas."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Bûk atsargus, jei numlock bus ájungtas, daugybë klaviðø gali veikti\n"
-#~ "kaip skaièiai vietoj normaliø raidþiø (pvz., paspaudus `p' bus `6')"
-
-#~ msgid "not connected"
-#~ msgstr "nepajungtas"
-
-#, fuzzy
-#~ msgid "Actions"
-#~ msgstr "Vieta"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Mokslinës programos"
-
-#~ msgid "toot"
-#~ msgstr "toot"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Serveris, Bylø/Spausdinimo/Samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Serveris, DNS/DHCP "
-
-#~ msgid "First DNS Server"
-#~ msgstr "Pirmasis DNS serveris"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Antrasis DNS serveris"
-
-#~ msgid "using module"
-#~ msgstr "naudojamas modulis"
-
-#~ msgid "Development, Database"
-#~ msgstr "Kûrimas, Duomenø bazës"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Kûrimo, Integruotos Aplinkos"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Kûrimo, Standartinës priemonës"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "Perspëjimas:\n"
-#~ "Pakeitimø pritaikymas veikiant X gali baigtis avarija."
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "Jeigu tæsite að iðjungsiu jûsø %s aplinkà"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s jau naudojama"
-
-#~ msgid "%s not found"
-#~ msgstr "%s nerastas"
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: Tai ne pagrindinis skirsnis, praðom pasirinkti kità"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(gali sugadinti duomenis)"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (serijinë)"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI pelë"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Pridëti paketø suradimo vietà"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Kada %s skirsnis %s, "
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Alcatel modemas"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Visos naujai nustatytos sritys norint jas naudoti turi bûti "
-#~ "suformatuotos\n"
-#~ "(formatavimas reiðia falinës sistemos sukûrimà). Dabar jûs gal bût "
-#~ "norite\n"
-#~ "iðnaujo suformatuoti jau formatuotas sritis, kad iðtrinti jose esanèius\n"
-#~ "duomenis. Atminkite kad iðnaujo formatuoti jau formatuotas sitis nëra\n"
-#~ "bûtina, nes jose gali bûti reikalinga informacija."
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB pelë"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB pelë (2 klaviðai)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB pelë (3+ klaviðai)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB pelë"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB pelë (2 klaviðai)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB pelë (3+ klaviðai)"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Ar tu tikri, kad esi ekspertas? \n"
-#~ "tau bus leidþiama daryti galingus, bet ir pavojingus dalykus èia.\n"
-#~ "\n"
-#~ "Tavæs bus klausiama, pvz: ¥Naudoti ðeðëlinæ bylà slaptaþodþiams?´,\n"
-#~ "ar esi pasiruoðæ atsakyti á tokius klausimus?"
-
-#~ msgid ""
-#~ "At this point, you need to choose what\n"
-#~ "partition(s) to use to install your new Mandrake Linux system. If "
-#~ "partitions\n"
-#~ "have been already defined (from a previous installation of GNU/Linux or "
-#~ "from\n"
-#~ "another partitioning tool), you can use existing partitions. In other "
-#~ "cases,\n"
-#~ "hard drive partitions must be defined.\n"
-#~ "\n"
-#~ "\n"
-#~ "To create partitions, you must first select a hard drive. You can select "
-#~ "the\n"
-#~ "disk for partitioning by clicking on \"hda\" for the first IDE drive, "
-#~ "\"hdb\" for\n"
-#~ "the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "To partition the selected hard drive, you can use these options:\n"
-#~ "\n"
-#~ "   * Clear all: this option deletes all partitions available on the "
-#~ "selected hard drive.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Auto allocate:: this option allows you to automatically create Ext2 "
-#~ "and swap partitions in free space of your\n"
-#~ "     hard drive.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Rescue partition table: if your partition table is damaged, you can "
-#~ "try to recover it using this option. Please\n"
-#~ "     be careful and remember that it can fail.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Undo: you can use this option to cancel your changes.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Reload: you can use this option if you wish to undo all changes and "
-#~ "load your initial partitions table\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Wizard: If you wish to use a wizard to partition your hard drive, "
-#~ "you can use this option. It is recommended if\n"
-#~ "     you do not have a good knowledge in partitioning.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Restore from floppy: if you have saved your partition table on a "
-#~ "floppy during a previous installation, you can\n"
-#~ "     recover it using this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Save on floppy: if you wish to save your partition table on a floppy "
-#~ "to be able to recover it, you can use this\n"
-#~ "     option. It is strongly recommended to use this option\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Done: when you have finished partitioning your hard drive, use this "
-#~ "option to save your changes.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, you can reach any option using the keyboard: navigate "
-#~ "trough the partitions using Tab and Up/Down arrows.\n"
-#~ "\n"
-#~ "\n"
-#~ "When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "           * Ctrl-c to create a new partition (when a empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "           * Ctrl-d to delete a partition\n"
-#~ "\n"
-#~ "           * Ctrl-m to set the mount point\n"
-#~ "           \n"
-#~ "\n"
-#~ "           \n"
-#~ "If you are installing on a PPC Machine, you will want to create a small "
-#~ "HFS 'bootstrap' partition of at least 1MB for use\n"
-#~ "by the yaboot bootloader. If you opt to make the partition a bit larger, "
-#~ "say 50MB, you may find it a useful place to store \n"
-#~ "a spare kernel and ramdisk image for emgergency boot situations."
-#~ msgstr ""
-#~ "Dabar tu turi pasirinkti, kuriuos skirsnius naudoti tavo naujai Mandrake "
-#~ "Linux \n"
-#~ "sistemai ádiegti. Jei skirsniai jau buvo apibrëþti (ið praeito ádiegimo "
-#~ "arba kitu dalinimo árankiu),\n"
-#~ "tu gali naudoti esanèius skirsnius. Kitu atveju, skirsniai turi bûti "
-#~ "apibrëþti.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kad sukurtum skirsnius, tu pirmiausia turi pasirinkti kietàjá diskà. "
-#~ "Diskà dalinimui\n"
-#~ "gali pasirinkti, paspaudæs ant \"hda\" jei nori pirmo IDE kaupiklio, \"hdb"
-#~ "\" -- antro,\n"
-#~ "arba \"sda\", jei renkiesi pirmàjá SCSI kaupiklá ir t.t.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kad sudalintum skirsniais pasirinktà kietàjá diskà, gali naudotis vienu "
-#~ "ið ðiø variantø:\n"
-#~ "\n"
-#~ "   * Iðvalyti viskà: ðis variantas iðtrina visus skirsnius, esanèius "
-#~ "pasirinktame kietajame diske.\n"
-#~ "\n"
-#~ "\n"
-#~ "    * Automatiðkai paskirti: ðis variantas leidþia automatiðkai sukurti "
-#~ "Ext2 bei swap skirsnius laisvoje tavo\n"
-#~ "     disko vietoje.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Iðgelbëti skirsniø lentelæ: jei disko skirsniø lentelë yra "
-#~ "sugadinta, tu gali bandyti atstatyti jà su ðiuo variantu.\n"
-#~ "     Bûk atsargus ir prisimink, kad tai gali nepavykti.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Atðaukti: tu gali naudoti ðá variantà, kad atðauktum visus tavo "
-#~ "pakeitimus.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Ið naujo: tu gali rinktis ðá variantà, kad atsisakytum visø savo "
-#~ "pakeitimø ir ákeltum pradinæ skirsniø lentelæ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Meistras: jei tu nori, kad meistras tau padëtø sudalinti kietàjá "
-#~ "diskà, rinkis ðá variantà. Tai rekomenduojama, jeigu\n"
-#~ "     tu nelabai iðmanai apie skirsniø dalinimà.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Atkurti ið diskelio: jei tu iðsaugojai savo skirsniø lentelæ á "
-#~ "diskelá ádiegdamas praeità kartà, tu gali atkurti jà\n"
-#~ "     naudodamasis ðiuo variantu.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Iðsaugoti á diskelá: jei tu nori iðsaugoti savo skirsniø lentelæ á "
-#~ "diskelá, kad galëtum paskui atkurti jà, rinkis ðá\n"
-#~ "     variantà. labai rekomenduojama, kad tu tai padarytum.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Atlikta: jei tu baigei dalinti savo kietàjá diskà, rinkis ðá "
-#~ "variantà, kad iðsaugotum visus pakeitimus.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tavo þiniai, tu gali pasiekti bet kurá variantà naudodamasis klaviatûra: "
-#~ "vaikðèiok tarp skirsniø su Tab bei\n"
-#~ "Aukðtyn/Þemyn rodyklëmis.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kai skirsnis yra parinktas, gali naudoti:\n"
-#~ "\n"
-#~ "* Ctrl-c kad sukurtum naujà skirsná (jei parinktas tuðèias skirsnis)\n"
-#~ "\n"
-#~ "* Ctrl-d kad iðtrintum skirsná.\n"
-#~ "\n"
-#~ "* Ctrl-m kad nurodytum prijungimà taðkà."
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Auto ádiegimo diskelis"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Automatinë skiriamoji geba"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Automatinë skiriamosios gebos paieðka"
-
-#~ msgid "Available packages"
-#~ msgstr "Prieinami paketai"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "Bloga kickstart byla %s (nepavyko %s)"
-
-#~ msgid "Cable connecion"
-#~ msgstr "Kabelinë jungtis"
-
-#~ msgid "Category"
-#~ msgstr "Kategorijà"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Pokalbiø (IRC arba instant messaging) programos, kaip xchat, licq, gaim, "
-#~ "ir bylø siuntimo programos"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Tikrinamos priklausomybës"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Pasirinkite \"Ádiegti\" jeigu nebuvo ádiegta ankstesniø GNU/Linux "
-#~ "versijø\n"
-#~ "arba jûs norite turëti jø keletà.\n"
-#~ "\n"
-#~ "Pasirinkite \"Iðgelbëti\" jeigu norite iðgelbëti jau ádiegtà Mandrake "
-#~ "Linux \n"
-#~ "\n"
-#~ "\n"
-#~ "Pasirinkite:\n"
-#~ "\n"
-#~ " - Rekomenduojama: Jeigu jums ansèiau nëra tekæ ádiegti GNU/Linux.\n"
-#~ "\n"
-#~ " - Vartotojiðka: Jeigu jau turëjote reikalø su GNU/Linux. Galësite "
-#~ "pasirinkti\n"
-#~ "pirminæ kompiuterio funkcijà\n"
-#~ "\n"
-#~ " - Eksperto: Jeigu jûs puikiai sekasi su GNU/Linux iðspræsti rimtas "
-#~ "uþduotis.\n"
-#~ "Kaip ir konfiguracijoje \"Vartotojiðka\" jûs galësite pasirinkti koks "
-#~ "bus\n"
-#~ "ðios sistemos panaudojimas.\n"
-#~ "   Bet Praðome, Praðome NESIRINKITE TAI, APIE KÀ JÛS NIEKO NEÞINOTE!\n"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Pasirinkite \"Ádiegti\" jeigu nebuvo ádiegta ankstesniø Linux versijø "
-#~ "arba\n"
-#~ "jûs norite turëti jø keletà.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pasirinkite \"Atnaujinti\" jeigu norite atnaujinti ankstesnes Mandrake\n"
-#~ "Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus),\n"
-#~ "6.1 (Helios), Gold 2000 arba 7.0 (Air)."
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "Ádiegti ar atnaujinti"
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "Pasirinkite kità CD ádiegimui"
-
-#~ msgid "Choose package to install"
-#~ msgstr "Pasirink paketà ádiegimui"
-
-#~ msgid "Collapse all"
-#~ msgstr "Iðskleisti visus"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Bendravimo priemonës"
-
-#~ msgid "Configure local network"
-#~ msgstr "Nustatyti vietiná tinklà"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Nustatyti interneto jungtá / Nustatyti vietiná tinklà"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Nurodyti laiko juostà"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Patvirtink slaptaþodá"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Kriptografija"
-
-#~ msgid "Customized"
-#~ msgstr "Prisitaikyta"
-
-#~ msgid "Czech"
-#~ msgstr "Èekø"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Duomenø baziø klientai ir serveriai (mysql bei postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Kûrimas C/C++"
-
-#~ msgid "Directory"
-#~ msgstr "Katalogas"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Uþdrausti interneto jungtá"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "Ar Jûs norite nustatyti savo modemo dialup prisijungimà?"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Ar Jûs norite nustatyti savo sistemos vietiná tinklà?"
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "Ar norite naudoti LILO?"
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "Parsiunèiami ðifruoti paketai"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "Pirmiausia DrakX pabandys paieðkoti PCI ir SCSI árenginiø. Jeigu jis "
-#~ "suras\n"
-#~ "ir þinos kokias tvarkykles jam (jiems) naudoti jis automatiðkai jas "
-#~ "ádës.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jeigu jûsø SCSI árenginys yra ISA plokðtë arba DrakX neþinos kaip já "
-#~ "valdyti\n"
-#~ "arba jûs iðvis jo neturite jums bus praneðta. Jeigu jûs neturite, "
-#~ "atsakykite\n"
-#~ "\"Ne\". Jeigu turite vienq arba daugiau atsakykite \"Taip\" ir tvarkykliø "
-#~ "sàraðas\n"
-#~ "bus jums parodytas\n"
-#~ "\n"
-#~ "\n"
-#~ "Kai jûs pasirinksite tvarkyklæ, DrakX papraðys nurodyti jos nustatymus.\n"
-#~ "Pirmiausia leiskite árangai paèiai nusistatyti. Daþnai tai puikiai "
-#~ "suveikia\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Jeigu jums nepavyks, nepamirðkite, kad informacijos apie jûsø árangà "
-#~ "gali\n"
-#~ "suteikti dokumentacija arba Windows (jeigu jûs turite ðià sistemà).\n"
-#~ "Tai tuos nustatymus jûs turite perduoti tvarkyklei."
-
-#~ msgid "ECI modem"
-#~ msgstr "ECI modemas"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Startuojant ájungti Num Lock"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "Ádëkite diskelá á kaupiklá, kad sukurti HTP diskelá\n"
-#~ "(Visi duomenys esantys dikelyje bus prarasti)"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "Viskas sukonfiguruota.\n"
-
-#~ msgid "Expand all"
-#~ msgstr "Iðskleisti visus"
-
-#~ msgid "Find Package"
-#~ msgstr "Rasti paketà"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Rasti bylà su atitinkamu paketu"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Ieðkoma lapø"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Lapø ieðkojimas ðiek tiek uþtruks"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "FTP ir HTTP metodams tu turi nurodyti vietà, kur yra hdlist\n"
-#~ "Ji turi bûti nurodyta santykinai aukðèiau esanèiam URL"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Ar pamirðti pakeitimus?"
-
-#~ msgid "France"
-#~ msgstr "Prancûzija"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Paprasta 3 klaviðø pelë (serijinë)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Paprasta pelë (serijinë)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (serijinë)"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "Germany"
-#~ msgstr "Vokieèiø"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Nurodyk vardà (pvz: `extra', `commercial')"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr "Ruoðiamasi ádiegti %d MB. Jûs galite pasirinkti daugiau programø"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Ruoðiamasi iðmesti áraðà %s"
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Grafinë sàsaja"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "SILO turi sekanèius áraðus.\n"
-#~ "Jûs galite pakeisti esamus arba pridëti naujø."
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Að galiu pabandyti surasti prieinamà skiriamàjà gebà (pvz.: 800x600).\n"
-#~ "Bet kompiuteris gali \"pakibti\"\n"
-#~ "Ar Jûs norite pabandyti?"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Að radau ISDN plokðtæ:\n"
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Jeigu DrakX nepavyko surasti jûsø pelës arba jûs pats norite jà\n"
-#~ "nurodyti; jums bus parodytas sàraðas\n"
-#~ "\n"
-#~ "\n"
-#~ "Jeigu jûs sutinkate su DrakX nustatymais tiesiog paspauskite OK.\n"
-#~ "Kitokiu atveju pasirinkite pelæ kuri jums labiausiai tinka.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jeigu pas jus yra pelë su serijine jungtimi jums taip pat reikës "
-#~ "nurodyti\n"
-#~ "prie kokios jungties ji yra prijungta."
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "Jei tavo ADSL modemas yra Alcatel, pasirink Alcatel, kitu atveju -- ECI."
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "Kurioje valstybëje tu dabar esi?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Ádiegti/Iðgelbëti"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "SILO ádiegimas nepavyko. Ávyko sekanti klaida:"
-
-#~ msgid "Installed packages"
-#~ msgstr "Ádiegti paketai"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Interneto árankiai"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "Ádiegimà reikia perstartuoti ið diskelio"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "Ádiegimà reikia perstartuoti su naujais parametrais"
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "Labai rekomenduojama èia pasirinkti \"Taip\". Jeigu jûs vëliau \n"
-#~ "ádieginësite Microsoft Windows ji naujai uþraðys startavimo sektoriø.\n"
-#~ "Tada nepadaræ startavimo diskelio kaip mes patarëje nebegalësite\n"
-#~ "startuoti GNU/Linux."
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (LInux LOader) gali startuoti ir kitas Operacines sistemas.\n"
-#~ "Normaliai jos yra tinkamai nustatomos per ádiegiant. Jeigu jûsø sistema\n"
-#~ "neaptikta jûs dabar galite pridëti vienà arba keletà.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jeigu jûs nenorite kuriø nors naudoti galite iðimti (tada startavimo\n"
-#~ "diskelis gai uþkrauti tà sistemà)."
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "Tiesus (reikalingas keletui SCSI kaupikliø)"
-
-#~ msgid "Local LAN"
-#~ msgstr "Lokalus LAN"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Vietinis tinklas jau buvo sukonfigûruotas.\n"
-#~ "Ar tu nori:"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech pelë"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (serijinë)"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft pelë"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft 2.1A arba vëlesnës Rev (serijinë)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Suderinama su Microsoft (serijinë)"
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Pajudinkite ratukà!"
-
-#~ msgid "Multimedia"
-#~ msgstr "Multimedija"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Tinklo adapteris 1 (eth0):"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Cdrom neprieinamas (nieko nëra /mnt/cdrom)"
-
-#~ msgid "No match"
-#~ msgstr "Nieko nerasta"
-
-#~ msgid "No more match"
-#~ msgstr "Daugiau nieko nerasta"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Nerasta galimø variantø\n"
-#~ "Pabandykite kità video plokðtæ arba monitoriø"
-
-#~ msgid "Other countries"
-#~ msgstr "Kitos valstybës"
-
-#~ msgid "Package"
-#~ msgstr "Paketas"
-
-#~ msgid "Password:"
-#~ msgstr "Slaptaþodis:"
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "Praðome pasirinkti skirsná, kurá Jûs naudosite kaip pagrindiná."
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Praðom patvirtinti sekanèià informacijà"
-
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, bibliotekos, árankiai"
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Konfigûruojama..."
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Rescue"
-#~ msgstr "Iðgelbëti"
-
-#~ msgid "SILO main options"
-#~ msgstr "Bendri SILO nustatymai"
-
-#~ msgid "Sciences"
-#~ msgstr "Mokslai"
-
-#~ msgid "Sciencific Workstation"
-#~ msgstr "Mokslinës darbo stotis"
-
-#~ msgid "Search"
-#~ msgstr "Paieðka"
-
-#~ msgid "Searching root partition."
-#~ msgstr "Ieðkomas pagrindinis skirsnis."
-
-#~ msgid "See"
-#~ msgstr "Pasiþiûrëti"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Pasirink dydá, kiek nori ádiegti"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Pasirinkite:\n"
-#~ "\n"
-#~ " - Rekomenduojama: Jeigu jums ansèiau nëra tekæ ádiegti Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Vartotojiðka: Jeigu jau turëjote reikalø su Linux. Galësite "
-#~ "pasirinkti\n"
-#~ "\"Normali\" bendros reikðmës sistemos ádiegimui, \"Kûrimo\" jeigu "
-#~ "naudojate\n"
-#~ "savo kompiuterá kurti programoms ir \"Serverinë\" jeigu norite turëti "
-#~ "bendros paskirties (pvz. paðto, spausdintuvo...) serverá.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Eksperto: Jeigu jûs puikiai sekasi su GNU/Linux iðspræsti rimtas "
-#~ "uþduotis.\n"
-#~ "Kaip ir konfiguracijoje \"Vartotojiðka\" jûs galësite pasirinkti koks "
-#~ "bus\n"
-#~ "ðios sistemos panaudojimas."
-
-#~ msgid "Setup SCSI"
-#~ msgstr "Nustatyti SCSI"
-
-#~ msgid "Show less"
-#~ msgstr "Rodyti maþiau"
-
-#~ msgid "Show more"
-#~ msgstr "Rodyti daugiau"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Rodyti tik lapus"
-
-#~ msgid "Shutting down"
-#~ msgstr "Bandoma iðjungti"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Dydis: %s MB"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovakø"
-
-#~ msgid "Sort by"
-#~ msgstr "Rûðiuoti pagal"
-
-#~ msgid "Text"
-#~ msgstr "Tekstas"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Sekanèius paketus ruoðiamasi iðmesti"
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Dabar yra ádiegiami paketai, kuriuos jûs pasirinkote. Tai turëtø\n"
-#~ "keletà minuèiø uþtrukti, taèiau jeigu jûs pasirinkote atnaujinti\n"
-#~ "tai turëtø uþtrukti kiek ilgiau."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Ði þymë jau naudojama"
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Ði sekcija yra skirta vietinio tinklo (LAN) nustatymui.\n"
-#~ "\n"
-#~ "Jeigu jûs pasakyrite \"Taip\" DrakX pabandys pats surasti tinklo kortà.\n"
-#~ "PCI árenginys turëtø bûti surastas ir prijungtas automatiðkai. Taèiau\n"
-#~ "jeigu jûsø turite ISA árenginá automatinis aptikimas nesuveiks ir jûs\n"
-#~ "turësite nurodyti tvarkyklæ ið sàraðo, kuris tada pasirodys.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dël SCSI árenginiø, leiskite tvarkyklei pirmiau paèiai pabandyti "
-#~ "árenginá,\n"
-#~ "nes kitokio atveju jums teks nurodyti nustatymus ið Windows Control "
-#~ "Panel\n"
-#~ "konfiguracijos\n"
-#~ "\n"
-#~ "\n"
-#~ "Jeigu jûs ádiegiate Mandrake Linux á kompiuterá, kuris jau yra tinkle\n"
-#~ "tinklo administratorius jums turi nurodyti informacijà apie IP adresà,\n"
-#~ "tinklo subkaukæ ir tinklo kaukæ. Ádiegiant privaèiam tinkle namuose, jums "
-#~ "tai\n"
-#~ "reikës pasirinkti paèiam."
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Að pabandysiu ávairias galimas skiriamasias gebas.\n"
-#~ "Jûsø ekranas mirgës...\n"
-#~ "Jeigu norite, galite já iðjungti, Jûs iðgirsite pyptelëjimà, kai bus "
-#~ "baigta"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Perjungti tarp ádiegtø ir prieinamø"
-
-#~ msgid "Tree"
-#~ msgstr "Medis"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Ar bandyti surasti %s árenginius"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Ar bandyti surasti PCI árenginius"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Ar pabandyti surasti PCMCIA kortas?"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Ar bandyti surasti modemà?"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL katalogo, kuriame yra RPM'ai"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB pelë (su 3 arba daugiau klaviðø)"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "Iðmetami RPM'ai"
-
-#~ msgid "Update location"
-#~ msgstr "Atnaujinti suradimo vietà"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Atnaujinama RPM bazë"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Naudoti MD5 slaptaþodþius"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Naudoti DiskDrake"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "Ar naudoti kieto disko optimizavimà?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Naudoti ðeðëlinæ bylà"
-
-#~ msgid "User name:"
-#~ msgstr "Vartotojo vardas:"
-
-#~ msgid "Wait"
-#~ msgstr "Palauk"
-
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Sveiki, besinaudojantys LILO, operaciniu sistemu ikrovos tvarkykle!\n"
-#~ "\n"
-#~ "Noredami suzinoti pasirinkimu sarasa, spauskite <TAB>.\n"
-#~ "\n"
-#~ "Noredami ijungti viena is ju, irasykite jo pavadinima ir spauskite "
-#~ "<ENTER>\n"
-#~ "arba laukite %d sekundziu ijungimo pagal nutylejima.\n"
-#~ "\n"
-
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Sveiki, besinaudojantys SILO, operaciniu sistemu ikrovos tvarkykle!\n"
-#~ "\n"
-#~ "Noredami suzinoti pasirinkimu sarasa, spauskite <TAB>.\n"
-#~ "\n"
-#~ "Noredami ijungti viena is ju, irasykite jo pavadinima ir spauskite "
-#~ "<ENTER>\n"
-#~ "arba laukite %d sekundziu ijungimo pagal nutylejima.\n"
-#~ "\n"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Ko ieðkai?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Kokia Jûsø pelës rûðis?"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Koks Jûsø klaviatûros iðdëstymas"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Kam bus naudojama tavo sistema?"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "Koks Jûsø vartojimas?"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Kokià ákrovos tvarkyklæ(-es) tu norëtum naudoti?"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Kurios bylos ieðkai?"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Kurio paketo ieðkai"
-
-#~ msgid "Which packages do you want to install"
-#~ msgstr "Kokius jûs norite ádiegti paketus"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Kokio tipo skirsná norite turëti?"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Prie kurios nuosekliosios jungties prijungta tavo pelë?"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Jums neuþtenka vietos Lnx4win"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "Dabar jûs galite pasirinkti kokius norite ádiegti paketus.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pirmiausia jûs galite pasirinkti, kokià paketø grupæ jûs norite ádiegti\n"
-#~ "arba atnaujinti. Po to jûs galite pasirinkti paketus, kurius jûs norite\n"
-#~ "ádiegti priklausomai nuo vietos kiek tam skiriate.\n"
-#~ "\n"
-#~ "\n"
-#~ "Informacija apie konkreèius paketus galite pamatyti lauke, pavadintame\n"
-#~ " \"Info\" kuris yra deðinëje paketø sàraðo pusëje."
-
-#~ msgid "automagic"
-#~ msgstr "Automagic"
-
-#~ msgid "beginner"
-#~ msgstr "pradedantysis"
-
-#~ msgid "brunette"
-#~ msgstr "brunetë"
-
-#~ msgid "changing type of"
-#~ msgstr "keièiamas "
-
-#~ msgid "default"
-#~ msgstr "Pagrindinis"
-
-#~ msgid "developer"
-#~ msgstr "programuotojas"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "nenaudoti pppoe"
-
-#~ msgid "expert"
-#~ msgstr "þiniukas"
-
-#~ msgid "formatting"
-#~ msgstr "suþymimas"
-
-#~ msgid "girl"
-#~ msgstr "mergina"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (svarbu)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (nuostabu)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (labai gerai)"
-
-#~ msgid "interesting"
-#~ msgstr "ádomu"
-
-#~ msgid "linear"
-#~ msgstr "Tiesus"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "mandatory"
-#~ msgstr "privalomas"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "nfs prijungimas nepavyko"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake dabar yra ¥atminties taupymo´ reþime.\n"
-#~ "Að paleisiu rpmdrake ið naujo, kad galëtum ieðkoti bylø"
-
-#~ msgid "shadow"
-#~ msgstr "ðeðëlinis"
-
-#~ msgid "tie"
-#~ msgstr "tie"
-
-#~ msgid "useless"
-#~ msgstr "nenaudinga"
-
-#~ msgid "vertical traditionnal aurora"
-#~ msgstr "vertikali tradicinë aurora"
-
-#~ msgid "woman-blond"
-#~ msgstr "blondinë"
diff --git a/perl-install/share/po/lv.po b/perl-install/share/po/lv.po
deleted file mode 100644
index 8c20503b8..000000000
--- a/perl-install/share/po/lv.po
+++ /dev/null
@@ -1,9965 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 2000 Free Software Foundation, Inc.
-# Copyright (c) 2000 MandrakeSoft
-# Vitauts Stochka <vit@dpu.lv>, 2000.
-# Juris Kudiòð <cooker@inbox.lv>, 2001.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-08-22 00:12+0200\n"
-"Last-Translator: Juris Kudiòð <cooker@inbox.lv>\n"
-"Language-Team: Latvian\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-13\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Konfigurât visus ekrânus neatkarîgi"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Lietot Xinerama piebûvi"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigurât tikai karti \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "N-ekrânu konfigurâcija"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Jûsu sistçma atbalsta n-ekrânu konfigurâciju.\n"
-"Ko nu darîsim?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Grafiskâ karte"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Izvçlieties grafisko karti"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Izvçlieties X serveri"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X serveris"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Kuru XFree konfigurâciju izvçlaties?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Jûsu karte spçj nodroðinât 3D akselerâciju, bet tikai ar XFree %s.\n"
-"Jûsu karti uztur XFree %s, kam var bût labâks 2D atbalsts."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Jûsu karte spçj nodroðinât 3D akselerâciju ar XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ar aparatûras 3D akselerâciju"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Jûsu karte spçj nodroðinât 3D akselerâciju ar XFree %s.\n"
-"ÒEMIET VÇRÂ, KA TAS IR EKSPERIMENTÂLS ATBALSTS, KAS VAR UZKÂRT DATORU."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ar EKSPERIMENTÂLU aparatûras 3D akselerâciju"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Jûsu karte spçj nodroðinât 3D akselerâciju, bet tikai ar XFree %s,\n"
-"ÒEMIET VÇRÂ, KA TAS IR EKSPERIMENTÂLS ATBALSTS, KAS VAR UZKÂRT DATORU.\n"
-"Jûsu karti uztur XFree %s, kam var bût labâks 2D atbalsts."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree konfigurâcija"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Izvçlieties grafiskâs kartes atmiòas apjomu"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Norâdiet servera opcijas"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Norâdiet monitoru"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitors"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Divi svarîgâkie parametri ir vertikâlâ pârzîmçðanas frekvence, kas nosaka\n"
-"visa ekrâna pârzîmçðanas bieþumu, un horizontâlâs sinhronizâcijas\n"
-"frekvence, kas nosaka skançðanas lîniju parâdîðanas bieþumu.\n"
-"\n"
-"Ir ÏOTI SVARÎGI, lai jûs nenorâdîtu monitora tipu, kura sinhronizâcijas\n"
-"frekvence pârsniedz jûsu monitora iespçjas: jûs varat sabojât savu "
-"monitoru.\n"
-" Ja neesat pârliecinâts, izvçlieties konservatîvâko variantu."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Horizontâlâ frekvence"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Vertikâlâ frekvence"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Monitors nav konfigurçts"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Grafiskâ karte vçl nav konfigurçta"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Izðíirtspçjas vçl nav izvçlçtas"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Vai vçlaties izmçìinât ðo konfigurâciju?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Brîdinâjums: ðîs grafiskâs kartes izmçìinâðana var uzkârt datoru"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Konfigurâcijas izmçìinâðana"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"mçìiniet izmainît daþus parametrus"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Atklâta kïûda:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Atliek %d sekundes"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Vai viss ir pareizi?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Atklâta kïûda, mçìiniet izmainît daþus parametrus"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Izðíirtspçja"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Norâdiet izðíirtspçju un krâsu dziïumu"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafiskâ karte: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 serveris: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Eksperta reþîms"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Parâdît visu"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Izðíirtspçjas"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastatûras izkârtojums: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Peles tips: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Peles ierîce: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitors: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitora horiz. frekv.: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitora vert. frekv.: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafiskâ karte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafiskâ karte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafiskâ atmiòa: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Krâsu dziïums: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Izðíirtspçja: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 serveris: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 draiveris: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Gatavoju X-Window konfigurâciju"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Ko jûs vçlaties darît?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Monitora maiòa"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Grafiskâs kartes maiòa"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Servera opciju maiòa"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Izðíirtspçjas maiòa"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Parâdît informâciju"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Mçìinât vçlreiz"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Iziet"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Saglabât izmaiòas?\n"
-"Paðreizçjâ konfigurâcija ir:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Lai aktivizçtu izmaiòas, lûdzu aizveriet un atveriet %s sesiju"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Lûdzu aizveriet sesiju un nospiediet Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X pçc startçðanas"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Datoru var konfigurçt, lai pçc sistçmas ielâdes automâtiski startçtu X.\n"
-"Vai vçlaties, lai pçc pârstartçðanas tiktu palaists X?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 krâsas (8 biti)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tûkstoði krâsu (15 biti)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tûkstoði krâsu (16 biti)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljoni krâsu (24 biti)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljardi krâsu (32 biti)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB vai vairâk"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Parasts VGA, 640x480 pie 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 pie 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 savietojams, 1024x768 pie 87 Hz ar joslâm (nav 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 pie 87 Hz ar joslâm, 800x600 pie 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Uzlabots Super VGA, 800x600 pie 60 Hz, 640x480 pie 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Ne-joslots SVGA, 1024x768 pie 60 Hz, 800x600 pie 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Augstas frekvences SVGA, 1024x768 pie 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frekvenèu, kas uztur 1280x1024 pie 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frekcenèu, kas uztur 1280x1024 pie 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frekvenèu, kas uztur 1280x1024 pie 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitors, kas uztur 1600x1200 pie 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitors, kas uztur 1600x1200 pie 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Sâknçjamâs partîcijas pirmais sektors"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Diska pirmais sektors (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILO instalçðana"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Kur jûs vçlaties instalçt sâknçtâju?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalçðana"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Sâknçtâja galvenâs opcijas"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Kuru OS ielâdçtâju lietot"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Sâknçtâja instalçðana"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Sâknçjamâ ierîce"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nedarbojas ar veciem BIOSiem)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Kompakts"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "kompakts"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Video reþîms"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Pauze pirms noklusçtâs sistçmas ielâdes"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Parole"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Parole (atkârtoti)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Ierobeþot komandrindas opcijas"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "ierobeþot"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Iztîrît /tmp katras sâknçðanas laikâ"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ja nepiecieðams, precizçjiet RAM apjomu (atrasti %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Atïaut multi profilus"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Norâdiet atmiòas apjomu Mb"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcijai ``Ierobeþot komandrindas opcijas'' nav jçgas bez paroles"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Lûdzu mçìiniet vçlreiz"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Paroles nesakrît"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Noklusçtâ OS?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Ðeit ir daþâdi sâknçðanas ieraksti.\n"
-"Jûs varat pievienot jaunus vai izmainît esoðos."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Pievienot"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Izdarîts"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Mainît"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Kâda veida ierakstu gribat pievienot"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Cita OS (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Cita OS (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Cita OS (windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Attçls"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Sakne"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Papildinât"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Lasît-rakstît"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tabula"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Nedroðs"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Nosaukums"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Noklusçts"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-izmçrs"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "BezVideo"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Izdzçst ierakstu"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Tukðs nosaukums nav atïauts"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Ðis nosaukums jau ir izmantots"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Atrasti %s %s interfeisi"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Vai ir vçl kâds?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Vai datorâ ir kâds %s interfeiss?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Nç"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Jâ"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Apskatît dzelþu informâciju"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalçju draiveri %s kartei %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(modulis %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kuru %s draiveri pamçìinât?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Daþos gadîjumos %s draiverim ir jânorâda papildus informâcija, lai tas\n"
-"darbotos pareizi, tomçr parasti tâ nav vajadzîga. Vai vçlaties norâdît\n"
-"papildus parametrus, vai arî ïausit draiverim aptaujât datoru un savâkt\n"
-"nepiecieðamo informâciju? Retos gadîjumos aptaujâðana var uzkârt datoru,\n"
-"taèu tas neradîs nekâdus bojâjumus."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Aptaujât"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Norâdît opcijas"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Tagad jûs varat norâdît parametrus modulim %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Tagad jûs varat norâdît moduïa %s opcijas.\n"
-"Opciju formâts ir ``nosaukums=vçrtîba nosaukums2=vçrtîba2 ...''.\n"
-"Piemçram, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Moduïa opcijas:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Moduïa %s ielâde bija neveiksmîga.\n"
-"Vai vçlaties pamçìinât ar citiem parametriem?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(jau pievienots %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Ðî parole ir pârâk vienkârða"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Lûdzu ievadiet lietotâja vârdu"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Lietotâja vârdâ var bût tikai mazie angïu burti, cipari, `-' un `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Ðâds lietotâja vârds jau ir pievienots"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Pievienot lietotâju"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Ievadiet lietotâju\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Apstiprinât lietotâju"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Vârds un uzvârds"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Lietotâja vârds"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Èaula"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Autoreìistrçðanâs"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Sistçmu var konfigurçt tâ, lai pçc startçðanas automâtiski tiktu\n"
-"atvçrta viena noteikta lietotâja sesija. \n"
-"Ja nevçlaties izmantot ðo iespçju, nospiediet atcelðanas pogu."
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Norâdiet noklusçto lietotâju:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Norâdiet izmantojamo logu menedþeri:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Lûdzu izvçlieties izmantojamo valodu."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "Jûs varat izvçlçties citas valodas, kas bûs pieejamas pçc instalçðanas"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Viss"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Juus sveic %s, opereetaajsisteemu paarsleedzeejs!\n"
-"\n"
-"Sarakstaa izveelieties vajadziigo sisteemu vai gaidiet %d sekundes, liidz "
-"tiks ielaadeeta nokluseetaa sisteema.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Juus sveic GRUB, opereetaajsisteemu izveeles programma!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Izmantojiet taustinus %c un %c, lai izveeleetos vajadziigo ierakstu."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Nospiediet ievadu, lai saakneetu izveeleeto OS, 'e', lai redigeetu"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandas pirms saakneesanas, vai 'c', lai izsauktu komandrindu."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Izdaliitais ieraksts tiks saakneets peec %d sekundeem."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "nepietiek vietas partîcijâ /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Darbavirsma"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Starta izvçlne"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Kur jûs vçlaties instalçt sâknçtâju?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "palîdzîba pagaidâm nav realizçta.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Sâknçðanas stila konfigurçðana"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Fails"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Fails/_Beigt"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Kategorizçjoðs Monitors"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitors"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradicionâlais Monitors"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradicionâlais Gtk+ Monitors"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Palaist Aurora sâknçðanas laikâ"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub reþîms"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Jûs paðlaik lietojat OS ielâdçtâju %s.\n"
-"Spiediet Konfigurçt, lai palaistu uzstâdîðanas meistaru."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Konfigurçt"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Sâknçðanas reþîms"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Sistçmas reþîms"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Palaist X-Window sistçmu sâknçðanas laikâ"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Nç, negribu lietot autologin"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Jâ, gribu lietot autologin ðim lietotâjam un darba virsmai"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "Labi"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Atcelt"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "lasîðanai nevar atvçrt /etc/inittab: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "LILO uzstâdîðana neizdevâs. Uzradâs ðâda kïûda:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minûtes"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minûte"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundes"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Vispirms izveidojiet datu rezerves kopiju"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Lasiet uzmanîgi!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ja gatavojaties izmantot aboot, neaizmirstiet atstât brîvu vietu diska\n"
-"sâkumâ (pietiek ar 2048 sektoriem)"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Kïûda"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Meistars"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Jauns"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "Attâla"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Montçðanas punkts"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Opcijas"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Tips"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Nomontçt"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Montçta"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Izvçlieties darbîbu"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Jums ir viena liela FAT partîcija\n"
-"(parasti to izmanto MicroSoft Dos/Windows).\n"
-"Iesaku vispirms izmainît ðîs partîcijas izmçru\n"
-"(uzklikðíiniet uz tâs, tad uz \"Mainît izmçru\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Lûdzu uzklikðíiniet uz partîcijas"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Lûdzu uzklikðíiniet uz partîcijas"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Lûdzu uzklikðíiniet uz partîcijas"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Detaïas"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "montçðana neizdevâs"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Tukðs"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Cits"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Failu sistçmu tipi:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Izveidot"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Tâ vietâ izmantojiet ``%s''"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Izdzçst"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Vispirms izmantojiet ``Nomontçt''"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Pçc partîcijas %s tipa nomaiòas visi ðajâ partîcijâ esoðie dati tiks "
-"pazaudçti"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kur jûs vçlaties montçt %s ierîci?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "Montçðanas iespçjas:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "Viss kas"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "Izòemams datu nesçjs"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "Mainît tipu"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Kuru failu sistçmu vçlaties?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "Skançju piejamos nfs kopîgos resursus"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "Skançju piejamos nfs kopîgos resursus uz servera %s"
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-#, fuzzy
-msgid "Server"
-msgstr "serveris"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "Skançju piejamos samba kopîgos resursus"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "Skançju piejamos samba kopîgos resursus uz servera %s"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "Izvçlieties partîciju"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Izvçlieties citu partîciju"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Iziet"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Pârslçgt eksperta reþîmâ"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Pârslçgt normâlajâ reþîmâ"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Atsaukt"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Tad turpinât?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Iziet nesaglabâjot"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Iziet neierakstot partîciju tabulau?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Vai vçlaties izmçìinât ðo konfigurâciju?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Izvietot automâtiski"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Visu dzçst"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Vairâk"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "Cietâ diska informâcija"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Nepietiek brîvas vietas, lai izvietotu automâtiski"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Visas primârâs partîcijas izmantotas"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Vairâk partîciju nevar pievienot"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Ja gribat vairâk partîcijas, izdzçsiet kâdu partîciju, lai varçtu izveidot "
-"paplaðinâto partîciju"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Ierakstît partîciju tabulu"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Salabot partîciju tabulu"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Salabot partîciju tabulu"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Salabot partîciju tabulu"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Izòemams datu nesçjs"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Izvçlieties failu"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Partîciju tabulas rezerves kopijai ir atðíirîgs izmçrs\n"
-"Tomçr turpinât, ja?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Uzmanîbu"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Ielieciet disketi\n"
-"Visi uz disketes esoðie dati tiks dzçsti"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Mçìinu saglâbt partîciju tabulu"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "Detalizçta informâcija"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Mainît izmçru"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Pârvietot"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formatçt"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Aktîva"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Pievienot pie RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Pievienot LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Izslçgt no RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Izòemt no LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Mainît RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Izmantot priekð loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Izveidot jaunu partîciju"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Sâkuma sektors: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Izmçrs MB: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Failu sistçmas tips: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Montçðanas punkts: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Priekðroka: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatçju loopback failu %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Nomainît partîcijas tipu"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kur jûs vçlaties montçt loopback failu %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nevaru noòemt montçðanas punktu, jo ðî partîcija tiek izmantota priekð "
-"loopback.\n"
-"Vispirms noòemiet loopback"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Izskaitïoju FAT failsistçmas robeþas"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Mainu izmçru"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Ðîs partîcijas izmçru nevar izmainît"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Visiem ðîs partîcijas datiem jâizveido rezerves kopijas"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Pçc partîcijas %s izmçra maiòas visi ðajâ partîcijâ esoðie dati tiks "
-"pazaudçti"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Norâdiet jauno izmçru"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "Jauns izmçrs MB: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Uz kuru disku vçlaties to pârvietot?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sektors"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Uz kuru sektoru vçlaties to pârvietot?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Pârvietoju"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Pârvietoju partîciju..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Norâdiet eksistçjoðu RAID, kam pievienot"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "jauns"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Norâdiet jau esoðu LVM kam pievienot"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "LVM vârds?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Ðo Partîciju nevar izmantot priekð loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Loopback faila vârds: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Vârds un uzvârds"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Fails jau tiek izmantots citam loopback, norâdiet citu failu"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Fails jau eksistç. Vai to izmantot?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "ierîce"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "lîmenis"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "gabala izmçrs"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Esiet uzmanîgi: ðî operâcija ir bîstama."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Kâds ir sadalîjuma tips?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Diemþçl es neïauðu izveidot /boot tik tâlu uz diska (uz cilindra > 1024).\n"
-"Vai nu jûs izmantojat LILO, un tas nestrâdâs, vai arî jûs neizmantojat LILO, "
-"un /boot jums nav vajadzîgs"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"partîcija, ko jûs izvçlçjâties pievienot kâ sakni (/), fiziski atrodas aiz\n"
-"ðî cietâ diska 1024. cilindra, un jums nav /boot partîcijas.\n"
-"Ja jûs plânojat izmantot LILO, neaizmirstiet pievienot /boot partîciju"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Jûs izvçlçjies programmatûras uzturçtu RAID partîciju kâ saknes partîciju "
-"(/).\n"
-"Neviens sâknçtâjs nespçj to izmantot bez /boot partîcijas.\n"
-"Tâpçc neaizmirstiet izveidot /boot partîciju."
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Iekârtas %s partîciju tabula tiks ierakstîta uz diska!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Lai izmaiòas stâtos spçkâ, jums ir jâpârstartç dators"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Pçc partîcijas %s formatçðanas visi ðajâ partîcijâ esoðie dati tiks pazaudçti"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Formatçju"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatçju loopback failu %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatçju partîciju %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid neizdevâs"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Nepietiek brîvas vietas, lai izvietotu jaunas partîcijas"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Nepietiek brîvas vietas, lai izvietotu jaunas partîcijas"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Izðíirtspçja: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Ierîce: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS iekârtas burts: %s (tikai minçjums)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Tips: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Vârds: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Sâkums: sektors %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Izmçrs: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektori"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "No cilindra %d lîdz cilindram %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Formatçta\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Neformatçta\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Montçta\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback fails(i): %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Noklusçti sâknçjamâ partîcija\n"
-"    (lai sâknçtu MS-DOS, nevis lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Lîmenis %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Gabala izmçrs %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID diski %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback faila nosaukums: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Izmçrs: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ìeometrija: %s cilindri, %s galvas, %s sektori\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diski %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "partîciju tabulas tips: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "uz ðinas %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Opcijas: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatçðana %s neizdevâs"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nezinu, kâ formatçt %s, izmantojot tipu %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "montçðana neizdevâs"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "montçðana neizdevâs: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "kïûda nomontçjot %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "vienkârðs"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "serveris"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Nevarat izmantot JFS partîcijâm, kas mazâkas par 16MB"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Nevarat izmantot ReiserFS pârtîcijâm, kas mazâkas par 32MB"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Montçðanas punktiem jâsâkas ar /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Jau eksistç partîcija ar montçðanas punktu %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Ðim katalogam ir jâpaliek saknes failsistçmâ"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Ðim montçðanas punktam ir nepiecieðama reâla failu sistçma (ext2, reiserfs)\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Kïûda, atverot %s ierakstîðanai: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Atklâta kïûda - nav atrasta neviena ierîce, kas derçtu jaunu failsistçmu "
-"veidoðanai. Lûdzu pârbaudiet dzelþus, lai noskaidrotu problçmas iemeslu"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Jums nav nevienas partîcijas!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Augstâk ir uzskaitîtas eksistçjoðâs Linux partîcijas, kas ir atrastas uz "
-"jûsu\n"
-"cietâ diska. Jûs varat atstât meistara izdarîto izvçli, jo tâ ir laba\n"
-"parastâm vajadzîbâm. Ja jûs izmainât ðo izvçli, jums ir jâdefinç vismaz\n"
-"saknes partîcijâ(\"/\"). Neizvçlieties pârâk mazu partîciju, citâdi jûs "
-"nevarçsit\n"
-"instalçt visas vajadzîgâs programmas. Ja vçlaties datus glabât atseviðíâ\n"
-"partîcijâ, jums ir jânorâda arî \"/home\" (to var izdarît tikai tad, ja jums "
-"ir\n"
-"vairâkas Linux partîcijas).\n"
-"\n"
-"\n"
-"Jûsu zinâðanai, katra partîcija ir uzskaitîta ðâdâ veidâ: \"Nosaukums\", "
-"\"Izmçrs\".\n"
-"\n"
-"\n"
-"\"Nosaukums\" ir kodçts ðâdi: \"cietâ diska tips\", \"cietâ diska numurs\",\n"
-"\"partîcijas numurs\" (piemçram, \"hda1\").\n"
-"\n"
-"\n"
-"\"Cietâ diska tips\" ir \"hd\", ja jûsu cietais disks ir IDE disks, \"sd\",\n"
-"ja tas ir SCSI cietais disks.\n"
-"\n"
-"\n"
-"\"Cietâ diska numurs\" vienmçr ir burts pçc \"hd\" vai \"sd\". IDE diskiem:\n"
-"\n"
-"   * \"a\" nozîmç \"primârâ IDE kontroliera galvenais disks\",\n"
-"\n"
-"   * \"b\" nozîmç \"primârâ IDE konytroliera pakârtotais disks\",\n"
-"\n"
-"   * \"c\" nozîmç \"sekundârâ IDE kontroliera galvenais disks\",\n"
-"\n"
-"   * \"d\" nozîmç \"sekundârâ IDE kontroliera pakârtotais disks\".\n"
-"\n"
-"\n"
-"SCSI diskiem \"a\" nozîmç \"primârais cietais disks\", \"b\" nozîmç\n"
-" \"sekundârais cietais disks\", utt..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Tagad varat norâdît servisus, kurus jûs vçlaties startçt sistçmas\n"
-"palaiðanas laikâ.\n"
-"\n"
-"\n"
-"Kad pele pârvietojas pâr saraksta elementu, parâdâs\n"
-"neliels palîdzîbas balons, kas paskaidro servisa lomu.\n"
-"\n"
-"\n"
-"Esiet îpaði uzmanîgs ðajâ solî, ja vçlaties sistçmu izmantot ka serveri:\n"
-"iespçjams, ka nevçlaties startçt nevienu nevajadzîgu servisu. Atcerieties.\n"
-"ka daþi servisi var bût bîstami, ja darbojas serverî.\n"
-"Parasti izvçlieties tikai tos servisus, kas jums tieðâm nepiecieðami."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux laiku rçíina pçc GMT jeb \"Grînièas Meridiâna Laika\" un pârvçrð\n"
-"to par vietçjo laiku atbilstoði jûsu izvçlçtajai laika joslai."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-#, fuzzy
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Paðlaik jums ir jâizvçlas, kur uz cietâ diska instalçt Mandrake Linux\n"
-"operçtâjsistçmu. Ja disks ir tukðs vai cita operçtâjsistçma aizòem visu\n"
-"vietu uz diska, jums bûs jâveic diska sadalîðana. Îsumâ, cietâ diska\n"
-"sadalîðana nozîmç to sadalît loìiskâs daïâs, lai izveidotu vietu\n"
-"Mandrake Linux sistçmas instalçðanai.\n"
-"\n"
-"\n"
-"Sakarâ ar to, ka diska sadalîðanas process parasti ir neatgriezenisks,\n"
-"nepieredzçjuðam lietotâjam tas var bût nepatîkams un stresa pilns.\n"
-"Ðis meistars vienkârðo procesu. Pirms uzsâkat dalîðanu, izlasiet\n"
-"rokasgrâmatu un visu labi pârdomâjiet.\n"
-"\n"
-"\n"
-"Jums ir nepiecieðamas vismaz divas partîcijas. Viena vajadzîga paðai "
-"sistçmai,\n"
-"otra - virtuâlajai atmiòai (Swap).\n"
-"\n"
-"\n"
-"Ja partîcijas jau izveidotas (agrâkas instalçðanas laikâ vai ar citu diska\n"
-"sadalîðanas rîku), jums tikai jânorâda tâs partîcijas, kurâs vçlaties\n"
-"instalçt Linux sistçmu.\n"
-"\n"
-"\n"
-"Ja partîcijas vçl nav izveidotas, jums tâs ir jâizveido. Lai to izdarîtu,\n"
-"izmantojiet augstâk pieejamo meistaru. Atkarîbâ no jûsu cietâ diska \n"
-"konfigurâcijas ir iespçjami vairâki risinâjumi:\n"
-"\n"
-"* Izmantot esoðu partîciju: meistars uz cietâ diska ir atklâjis vienu vai "
-"vairâkas Linux partîcijas. Ja vçlaties\n"
-" tâs saglabât, izvçlieties ðo opciju. \n"
-"\n"
-"\n"
-"* Izdzçst visu disku: ja vçlaties izdzçst visus uz diska esoðos datus un "
-"partîcijas un aizstât tâs ar jaunu\n"
-"  Mandrake Linux sistçmu, varat izvçlçties ðo opciju. Esiet uzmanîgi, "
-"izvçloties ðo risinâjumu, jo pçc\n"
-"  apstiprinâðanas jûs vairs nevarçsit atteikties no ðîs izvçles.\n"
-"\n"
-"\n"
-"* Izmanto brîvo vietu Windows partîcijâ: ja uz cietâ diska ir instalçts "
-"Microsoft Windows, kas aizòem visu\n"
-"  vietu, jums ir jâatbrîvo vieta Linux datiem. Lai to izdarîtu, jûs varat "
-"nodzçst Microsoft Windows partîciju un\n"
-"  datus (skatît risinâjumus \"Izdzçst visu disku\" vai \"Eksperta reþîms\") "
-"vai izmainît Microsoft\n"
-"  Windows partîcijas izmçru. partîcijas izmçru var izmainît bez datu "
-"zaudçðanas. Ðis risinâjums ir ieteicams, ja\n"
-"  jûs savâ datorâ vçlaties izmantot gan Mandrake Linux, gan Microsoft "
-"Windows.\n"
-"\n"
-"\n"
-"  Pirms izvçlaties ðo risinâjumu, òemiet vçrâ, ka Microsoft Windows "
-"partîcijas izmçrs bûs mazâks, nekâ tas ir\n"
-"  paðlaik. Tas nozîmç, ka jums Microsoft Windows sistçmâ bûs mazâk vietas "
-"datiem vai programmu instalçðanai.\n"
-"\n"
-"\n"
-"* Eksperta reþîms: ja jûs vçlaties patstâvîgi veidot diska partîcijas, varat "
-"izvçlçties ðo variantu. Esiet\n"
-"  uzmanîgi, izveloties ðo risinâjumu. Tas ir ar plaðâm iespçjâm, bet ïoti "
-"bîstams. Jûs varat pazaudçt\n"
-"  visus datus, tâpçc izvçlieties tikai tad, ja zinat, ko darât."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Visas jaunizveidotâs partîcijas ir jâformatç, pirms tâs var izmantot\n"
-"(formatçðana nozîmç failsistçmas izveidoðanu).\n"
-"\n"
-"\n"
-"Tagad jûs arî varat izvçlçties pârformatçt daþas jau esoðas partîcijas, lai\n"
-"izdzçstu tajâs esoðo informâciju. Ja jûs vçlaties to darît, norâdiet\n"
-"partîcijas, kuras vçlaties formatçt.\n"
-"\n"
-"\n"
-"Òemiet vçrâ, ka nav nepiecieðams pârformatçt visas jau eksistçjoðas "
-"partîcijas.\n"
-"Jums ir jâformatç partîcijas, kurâs atrodas operçtâjsistçma (piemçram, \"/"
-"\",\n"
-"\"/usr\" vai \"/var\"), bet nav jâformatç partîcijas, kurâs atrodas dati, "
-"ko\n"
-"jûs vçlaties saglabât (parasti /home).\n"
-"\n"
-"\n"
-"Esiet uzmanîgi, izvçloties partîcijas, jo pçc formatçðanas visi dati bûs\n"
-"iznîcinâti un jûs vairs nevarçsit tos atjaunot.\n"
-"\n"
-"\n"
-"Noklikðíiniet \"Labi\", kad esat gatavi formatçt partîcijas.\n"
-"\n"
-"\n"
-"Noklikðíiniet \"Atcelt\", ja jûs gribat izvçlçties citas partîcijas, kur\n"
-"instalçt jauno Mandrake Linux operçtâjsistçmu."
-
-#: ../../help.pm_.c:376
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Jûsu jaunâ Mandrake Linux operçtâjsistçma paðlaik tiek\n"
-"instalçta. Ðî darbîba aizòems daþas minûtes (tas ir atkarîgs no apjoma,\n"
-"ko jûs izvçlçjâties instalçt, un no jûsu datota âtruma.)\n"
-"\n"
-"\n"
-"Lûdzu esiet pacietîgs."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-#, fuzzy
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Paðlaik jums ir jâizvçlas, kurâ(s) diska partîcijâ(s) instalçt Mandrake "
-"Linux\n"
-"operçtâjsistçmu. Ja partîcijas jau ir izveidotas (agrâkas GNU/Linux "
-"instalçðanas\n"
-"laikâ vai ar citu diska sadalîðanas rîku), jûs varat izmantot esoðâs "
-"dadaïas.\n"
-"Citos gadîjumos ir jâveido jaunas diska partîcijas.\n"
-"\n"
-"\n"
-"Lai veidotu partîcijas, jums vispirms ir jâizvçlas cietais disks. Jûs varat\n"
-"norâdît sadalâmo disku, noklikðíinot uz \"hda\" pirmajam IDE diskam,\n"
-"\"hdb\" - otrajam diskam, \"sda\" - pirmajam SCSI diskam, utt.\n"
-"\n"
-"\n"
-"Lai sadalîtu izvçlçto cieto disku, varat izmantot sekojoðas opcijas:\n"
-"\n"
-"   * Izdzçst visu: ðî opcija izdzçð visas partîcijas, kas atrodas uz "
-"izvçlçtâ cietâ diska.\n"
-"\n"
-"\n"
-"   * Izvietot automâtiski: ðî opcija ïauj jums automâtiski izveidot Ext2 un "
-"swap partîcijas jûsu cietâ diska\n"
-"     brîvajâ vietâ.\n"
-"\n"
-"\n"
-"   * Salabot partîciju tabulu: ja partîciju tabula ir bojâta, jûs varat "
-"mçìinât to autjaunot, izmantojot ðo opciju.\n"
-"     Esiet uzmanîgi un atcerieties, ka tas var neizdoties.\n"
-"\n"
-"\n"
-"   * Atsaukt: jûs varat izmantot ðo opciju, lai atceltu izmaiòas.\n"
-"\n"
-"\n"
-"   * Pârlâdçt: jûs varat izmantot ðo opciju, ja vçlaties atsaukt visas "
-"izmaiòas un ielâdçt sâkotnçjot partîciju tabulu.\n"
-"\n"
-"\n"
-"   * Meistart: Ja cietâ diska sadalîðanai vçlaties izmantot meistaru, varat "
-"lietot ðo opciju. Tâ ir ieteicama,\n"
-"     ja jums nav labu zinâðanu par diska sadalîðanu.\n"
-"\n"
-"\n"
-"   * Atjaunot no disketes: ja iepriekðçjâs instalçðanas laikâ saglabâjât "
-"partîciju tabulu disketç, jûs varat\n"
-"     to atjaunot, izmantojot ðo opciju.\n"
-"\n"
-"\n"
-"   * Saglabât disketç: ja vçlaties partîciju tabulu saglabât disketç, lai "
-"varçtu to atjaunot, izmantojiet ðo\n"
-"     opciju. Ir ïoti ieteicams izmantot ðo opciju.\n"
-"\n"
-"\n"
-"   * Izdarîts: kad esat pabeiguði cietâ diska dalîðanu, izmantojiet ðo "
-"opciju, lai saglabâtu izmaiòas.\n"
-"\n"
-"\n"
-"Jûsu zinâðanai, jebkuru opciju var izsaukt ar tastatûru: pârvietojieties "
-"starp partîcijâm, izmantojot Tab un Auðup/Lejup bultiòas.\n"
-"\n"
-"\n"
-"Kad ir izvçlçta partîcija, jûs varat izmantot:\n"
-"\n"
-"           * Ctrl-c, lai izveidotu jaunu partîciju (kad ir izvçlçta tukða "
-"partîcija)\n"
-"\n"
-"           * Ctrl-d, lai izdzçstu partîciju\n"
-"\n"
-"           * Ctrl-m, lai uzstâdîtu montçðanas punktu"
-
-#: ../../help.pm_.c:460
-#, fuzzy
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Uz jûsu cietâ diska ir atrasta vairâk nekâ viena Microsoft Windows "
-"partîcija.\n"
-"Lûdzu izvçlieties to partîciju, kuras izmçru jûs vçlaties izmainît, lai\n"
-"instalçtu jauno Mandrake Linux operçtâjsistçmu.\n"
-"\n"
-"\n"
-"Jûsu zinâðanai, katra partîcija ir uzskaitîta ðâdâ veidâ: \"Linux nosaukums"
-"\",\n"
-"\"Windows nosaukums\" \"Izmçrs\".\n"
-"\n"
-"\"Linux nosaukums\" ir kodçts ðâdi: \"cietâ diska tips\", \"cietâ diska\n"
-"numurs\", \"partîcijas numurs\" (piemçram, \"hda1\").\n"
-"\n"
-"\n"
-"\"Cietâ diska tips\" ir \"hd\", ja jûsu cietais disks ir IDE disks, \"sd\",\n"
-"ja tas ir SCSI cietais disks.\n"
-"\n"
-"\n"
-"\"Cietâ diska numurs\" vienmçr ir burts pçc \"hd\" vai \"sd\". IDE diskiem:\n"
-"\n"
-"   * \"a\" nozîmç \"primârâ IDE kontroliera galvenais disks\",\n"
-"\n"
-"   * \"b\" nozîmç \"primârâ IDE konytroliera pakârtotais disks\",\n"
-"\n"
-"   * \"c\" nozîmç \"sekundârâ IDE kontroliera galvenais disks\",\n"
-"\n"
-"   * \"d\" nozîmç \"sekundârâ IDE kontroliera pakârtotais disks\".\n"
-"\n"
-"\n"
-"SCSI diskiem \"a\" nozîmç \"primârais cietais disks\", \"b\" nozîmç\n"
-" \"sekundârais cietais disks\", utt...\n"
-"\n"
-"\"Windows nosaukums\" ir jûsu cietâ diska burts Windows vidç (pirmais disks\n"
-"vai partîcija saucas \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Lûdzu esat pacietîgs. Ðî darbîba var ilgt vairâkas minûtes."
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Lûdzu izvçlieties \"Instalçt\", ja nav instalçta vecâka Linux-Mandrak "
-"versija\n"
-"vai jûs vçlaties izmantot vairâkas operçtâjsistçmas.\n"
-"\n"
-"\n"
-"Lûdzu izvçlieties \"Atjauninât\", ja jûs vçlaties atjauninât jau instalçtu\n"
-"Mandrake Linux versiju.\n"
-"\n"
-"\n"
-"Atkarîbâ no jûsu GNU/Linux zinâðanâm, varat izvçlçties vienu no "
-"sekojoðajiem\n"
-"Mandrake Linux instalçðanas vai atjauninâðanas lîmeòiem:\n"
-"\n"
-"* Ieteicama: ja neesat ne reizi instalçjis GNU/Linux operçtâjsistçmu, "
-"izvçlieties ðo lîmeni. Instalçðana bûs\n"
-"  ïoti vienkârða, un jums tiks uzdoti tikai daþi jautâjumi.\n"
-"\n"
-"\n"
-"* Pielâgota: ja pietiekami labi pârzinat GNU/Linux, varat norâdît sistçmas "
-"pamatpielietojumu (darbastacija, serveris,\n"
-"  izstrâdei). Jums bûs jâatbild uz vairâk jautâjumiem nekâ \"Ieteicamas\" "
-"instalçðanas klases gadîjumâ, tâpçc\n"
-"  jums jâzina, kâ darbojas GNU/Linux, ja gribat izvçlçties ðo klasi.\n"
-"\n"
-"\n"
-"* Eksperta: ja jûs labi zinat GNU/Linux, varat izvçlçties ðo instalçðanas "
-"klasi. Tâpat kâ \"Pielâgotas\" klases\n"
-"  gadîjumâ, jûs varçsit norâdît sistçmas pamatpielietojumu (darbastacija, "
-"serveris, izstrâdei). Esiet ïoti\n"
-"  uzmanîgi, pirms izvçlaties ðo klasi. Jûs varçsit veikt ïoti precîzi "
-"pielâgotu instalçðanu.\n"
-"  Uz daþiem jautâjumiem bûs grûti atbildçt, ja jûsu GNU/Linux zinâðanas nav "
-"pietiekoði labas. Tâpçc neizvçlieties\n"
-"  ðo instalçðanas klasi, ja neesat pârliecinâts."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Lûdzu izvçlieties pareizu portu. Piemçram, MS Windows\n"
-"ports COM1 GNU/Linux vidç saucas ttyS0."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) un Grub ir sâknçtâji: tie spçj sâknçt GNU/Linux\n"
-"vai jebkuru citu operçtâjsistçmu, kas ir uzstâdîta jûsu datorâ.\n"
-"Parasti citas operçtâjsistçmas tiek korekti noteiktas un instalçtas.\n"
-"Ja tâ nenotiek, jûs ðajâ ekrânâ varat patstâvîgi pievienot ierakstu. Esiet\n"
-"uzmanîgs, izvçloties pareizus parametrus.\n"
-"\n"
-"\n"
-"Jûs varbût arî vçlaties neïaut nevienam piekïût pârçjâm operçtâjsistçmâm,\n"
-"un ðajâ gadîjumâ jûs varat izdzçst attiecîgos ierakstus. Bet ðajâ\n"
-"gadîjumâ jums bûs nepiecieðama sâknçðanas diskete, lai tâs sâknçtu!"
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Jums ir jânorâda, kur jûs vçlaties novietot\n"
-"GNU/Linux sâknçðanai nepiecieðamo informâciju.\n"
-"\n"
-"\n"
-"Ja vien jûs neesat absolûti pârliecinâts par savu rîcîbu,\n"
-"izvçlieties \"Diska pirmais sektors (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX mçìinâs sameklçt PCI SCSI adapteri(us).\n"
-"Ja DrakX atradîs kâdu SCSI adapteri un zinâs, kuru draiveri izmantot,\n"
-"tas tiks instalçts automâtiski.\n"
-"\n"
-"Ja jums nav SCSI adapteru, ir ISA SCSI adapteris vai PCI SCSI adapteris,\n"
-"ko DrakX neatpazîst, jums tiks pajautâts, vai jûsu sistçmâ ir SCSI\n"
-"adapteris. Ja nav SCSI adapteru, jûs varat vienkârði izvçlçties 'Nç'.\n"
-"Ja jûs izvçlaties 'Jâ', jums tiks parâdîts draiveru saraksts, kurâ\n"
-"varat izvçlçties vajadzîgo adapteri.\n"
-"\n"
-"\n"
-"Ja jums nepiecieðams patstâvîgi norâdît adapteri, DrakX pajautâs, vai\n"
-"vçlaties norâdît adaptera opcijas. Jums bûtu jâïauj DrakX aptaujât\n"
-"dzelþus un noskaidrot opcijas. Parasti tas izdodas bez problçmâm.\n"
-"\n"
-"Ja neizdodas, jums patstâvîgi jânorâda draivera opcijas.\n"
-"Izlasiet Instalçðanas rokasgrâmatu (3. nodaïu, apakðnodaïu \"Informâcijas "
-"savâkðana par jûsu dzelþiem\"), lai uzzinâtu, kâ iegût ðo\n"
-"informâciju no dzelþu dokumentâcijas, raþotâja tîkla lapas\n"
-"(ja jums ir pieejams Internets) vai Windows (ja tas ir uzstâdîts jûsu "
-"datorâ)."
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Norâdiet cieto disku, ko vçlaties izdzçst, lai izveidotu jaunu\n"
-"Mandrake Linux partîciju. Esiet uzmanîgi, jo visi diskâ esoðie dati\n"
-"pazudîs un nebûs atjaunojami."
-
-#: ../../help.pm_.c:832
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Nospiediet \"Labi\", ja vçlaties izdzçst visus datus un\n"
-"partîcijas, kas atrodas uz ðî cietâ diska. Esiet uzmanîgi, pçc \"Labi\" "
-"nospieðanas jûs nevarçsit atjaunot nekâdus datus vai partîcijas, kas "
-"atradâs\n"
-"uz diska, tajâ skaitâ arî Windows datus.\n"
-"\n"
-"\n"
-"Nospiediet \"Atcelt\", lai atceltu ðo operâciju bez jebkâdu uz ðî diska "
-"esoðu datu vai partîciju pazaudçðanas."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ielieciet FAT formatçtu disketi iekârtâ %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Lai izmantotu ðo saglabâto pakotòu izvçli, palaidiet instalâciju ar ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Kïûda, nolasot failu %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Labi"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Daþu jûsu datora dzelþu darbîbai nepiecieðami ``firmas'' draiveri.\n"
-"Papildus informâciju varat atrast ðeit: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Jums ir nepiecieðama saknes partîcija.\n"
-"Ðim nolûkam izveidojiet partîciju (vai uzklikðíiniet uz jau esoðas).\n"
-"Tad izvçlieties darbîbu ``Montçðanas punkts'' un norâdiet, ka tas ir `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Jums ir nepiecieðama swap partîcija"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Jums nav swap partîcijas\n"
-"\n"
-"Vai tomçr turpinât?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Jums ir nepiecieðama swap partîcija"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Izmantot brîvo vietu"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nepietiek brîvas vietas, lai izvietotu jaunas partîcijas"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Izmantot jau esoðu partîciju"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Nav nevienas partîcijas, ko varçtu izmantot"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Izmantot Windows partîciju priekð loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kuru partîciju vçlaties izmantot priekð Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Izvçlieties izmçrus"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Saknes partîcijas izmçrs (MB): "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Swap partîcijas izmçrs (MB): "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Izmantot Windows partîcijas brîvo vietu"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Kuras partîcijas izmçru vçlaties izmainît?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Izskaitïoju Windows failu sistçmas robeþas"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT izmçra mainîtâjs nespçj izmainît jûsu partîciju,\n"
-"atklâta sekojoða kïûda: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Windows partîcija ir pârâk fragmentçta, vispirms palaidiet ``defrag''"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"BRÎDINÂJUMS!\n"
-"\n"
-"Tagad DrakX izmainîs Windows partîcijas izmçru. Esiet uzmanîgs: ðî darbîba\n"
-"ir bîstama. Ja jûs to vçl neesat izdarîjis, jums vispirms ir jâpârtrauc\n"
-"instalçðana, no Windows jâpalaiþ scandisk (ieteicams palaist arî defrag),\n"
-"tad atkârtoti jâsâk instalçðana. Vajadzçtu izveidot arî datu rezerves\n"
-"kopiju. Kad esat pârliecinâts, nospiediet Labi."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Kâdu apjomu vçlaties atstât priekð windows uz"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "partîcija %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT izmçra maiòa neizdevâs: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nav FAT partîciju, lai izmainîto to izmçru vai izmantotu kâ loopback (vai "
-"nepietiek brîvas vietas)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Izdzçst visu disku"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Noòemt Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Jums ir vairâk nekâ viens cietais disks, uz kura jûs instalçjat linux?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "VISAS diska %s partîcijas un tajâs esoðie dati tiks pazaudçti"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Pielâgots disku sadalîjums"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Izmantot fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Tagad jûs varat sadalît diska iekârtu %s.\n"
-"Kad esat pabeiguði, neaizmirstiet saglabât, izmantojot `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Jûsu Windows partîcijâ nav pietiekoði daudz brîvas vietas"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Nevaru atrast vietu instalçðanai"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX partîciju veidoðanas meistars atrada sekojoðus risinâjumus:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Diska sadalîðana neizdevâs: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Iedarbinu tîklu"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Atslçdzu tîklu"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Atklâta kïûda, bet es nezinu, kâ ar to pareizi apieties.\n"
-"Turpiniet, ja vçlaties riskçt."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dublçts montçðanas punkts %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Daþas svarîgas pakotnes neizdevâs pareizi instalçt.\n"
-"Ir bojâta jûsu kompaktdisku iekârta vai instalâcijas disks.\n"
-"Parbaudiet disku uz instalçta datora, izmantojot komandu \"rpm -qpl Mandrake/"
-"RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Jûs sveic %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Nav nevienas diskeðu iekârtas"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Uzsâku soli `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Norâdiet apjomu, ko vçlaties instalçt"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Kopçjais izmçrs: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versija: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Apjoms: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Izvçlieties pakotnes, ko vçlaties instalçt"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Info"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Instalçt"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Instalçju"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Lûdzu uzgaidiet, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Atlikuðais laiks"
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Kopçjais laiks"
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Sagatavoju instalçðanu"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalçju pakotni %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Tomçr turpinât?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Pakotòu kârtoðanas laikâ atklâta kïûda:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Vai izmantot jau esoðo X11 konfigurâciju?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Jûsu sistçmai trûkst resursu. Mandrake Linux instalçðanas laikâ var\n"
-"rasties problçmas. Ja tâ notiek, varat pamçìinât teksta instalçðanu.\n"
-"Lai to izdarîtu, nospiediet`F1', ka notiek ielâde no CDROM, tad ievadiet\n"
-"`text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Instalçðanas klase"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Lûdzu izvçlieties vienu no sekojoðâm instalçðanas klasçm:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Kopçjais jûsu izvçlçto grupu izmçrs ir aptuveni %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ja jûs vçlaties instalçt mazâk nekâ ðo izmçru,\n"
-"procentuâli izvçlieties instalçjamo pakotòu daudzumu.\n"
-"\n"
-"Zems procentu lîmenis instalçs tikai vissvarîgâkâs pakotnes;\n"
-"100% lîmenî tiks instalçtas visas izvçlçtâs pakotnes."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Jums uz diska ir vieta tikai %d%% no ðîm pakotnçm.\n"
-"\n"
-"Ja vçlaties instalçt mazâk, procentuâli izvçlieties instalçjamo pakotòu\n"
-"daudzumu. Zems procentu lîmenis instalçs tikai vissvarîgâkâs pakotnes;\n"
-"%d%% lîmenis instalçs tik daudz pakotòu, cik ir iespçjams."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Nâkamajâ solî jûs varçsit izvçlçties daudz precîzâk."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Instalçjamo pakotòu procentuâlais daudzums"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Pakotòu grupu izvçle"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Atseviðíu pakotòu izvçle"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Kopçjais izmçrs: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Slikta pakotne"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nosaukums: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Svarîgums: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Jûs nevarat izvçlçties ðo pakotni, jo nepietiek vietas tâs instalçðanai"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Tiks instalçtas sekojoðas pakotnes"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Tiks noòemtas sekojoðas pakotnes"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Jûs varat izvçlçties/atteikties no ðîs pakotnes"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ðî ir obligâta pakotne, no tâs nevar atteikties"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Jûs nevarat atteikties no ðîs pakotnes. Tâ jau ir instalçta"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ðo pakotni ir nepiecieðams uzlabot\n"
-"Vai tieðâm vçlaties atteikties no tâs?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Jûs nevarat atteikties no ðîs pakotnes. To ir nepiecieðams uzlabot"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:460
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Saglabât disketç"
-
-#: ../../install_steps_gtk.pm_.c:461
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Saglabât pakotòu izvçli"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Minimal install"
-msgstr "Instalçðanas beigas"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Aprçíinu"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Lûdzu gaidiet, gatavoju instalâciju"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d pakotnes"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Brîdinâjums\n"
-"\n"
-"Lûdzu rûpîgi izlasiet zemâk esoðos nosacîjumus. Ja jûs nepiekrîtat kâdai\n"
-"to daïai, jûs nedrîkstat instalçt no ðî CD. Nospiediet 'Noraidît', lai\n"
-"turpinâtu instalçðanu, neizmantojot ðo datu nesçju.\n"
-"\n"
-"\n"
-"Daþi ðajâ CD datu nesçjâ esoðie komponenti nav pakïauti GPL licencei vai\n"
-"lîdzîgiem lîgumiem. Katra ðâda komponenta izmantoðanu nosaka atseviðías\n"
-"licences noteikumi un nosacîjumi. Lûdzu rûpîgi to izlasiet un ievçrojiet\n"
-"tâs nosacîjumus, pirms izmantot vai izplatît uzskaitîtos komponentus.\n"
-"Ðîs licences pârsvarâ aizliegs jums pârsûtît, dublçt (izòemot rezerves\n"
-"kopçðanas nolûkus), izplatît tâlâk, reversi uzbûvçt, de-asamblçt,\n"
-"de-kompilçt vai modificçt ðo kompomentu. Jebkurð ðîs vienoðanâs pârkâpums\n"
-"jums automâtiski atòems tiesîbas, ko pieðíîrusi attiecîgâ licence. Izòemot\n"
-"gadîjumus, kad konkrçtas lcences nosacîjumi jums dod ðâdas tiesîbas, jûs\n"
-"parasti nedrîkstat instalçt ðâdu programmu uz vairâk nekâ vienas sistçmas\n"
-"vai pielâgot to izmantoðanai tîklâ. Ja ðaubâties, lûdzu sazinieties ar\n"
-"komponenta izplatîtâju vai redaktoru.\n"
-"Ðâdu komponentu, tajâ skaitâ arî iekïautâs dokumentâcijas, nodoðana\n"
-"treðajâm personâm vai kopçðana parasti ir aizliegta.\n"
-"\n"
-"\n"
-"Visas nâkamajâ CD datu nesçjâ iekïauto komponentu tiesîbas pieder to\n"
-"attiecîgajiem autoriem, un tâs aizsargâ intelektuâlâ îpaðuma un\n"
-"autortiesîbu likumi, kas attiecas uz programnodroðinâjumu.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Pieòemt"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Noraidît"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Nomainiet Cd-Rom!\n"
-"\n"
-"Lûdzu ielieciet iekârtâ Cd-Rom \"%s\", kad tas ir izdarîts, nospiediet Labi\n"
-"Ja jums nav ðî diska, nospiediet Atcelt, lai neinstalçtu no ðî Cd-Rom."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Pakotòu instalçðanas laikâ atklâta kïûda:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Atklâta kïûda"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Licences lîgums"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatûra"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Lûdzu izvçlieties jûsu tastatûras izkârtojumu."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Ðeit ir pilns pieejamo tastatûru saraksts"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Kuru instalçðanas klasi vçlaties?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Instalçt/Atjauninât"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Ðî ir instalçðana vai atjauninâðana?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Ieteicama"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Eksperta"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Atjauninât"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Lûdzu izvçlieties jûsu peles tipu."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Peles ports"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Lûdzu izvçlieties, kuram seriâlajam portam ir pieslçgta pele."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurçju PCMCIA kartes..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Konfigurçju IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "nav pieejamu partîciju"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Pârmeklçju partîcijas, lai atrastu montçðanas punktus"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Izvçlieties montçðanas punktus"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Neizdevâs nolasît diska partîciju tabulu, jo tâ bija pârâk stipri bojâta :(\n"
-"Sistçma var mçìinât atslçgts sliktâs partîcijas (VISI DATI pazudîs!).\n"
-"Otrs risinâjums ir aizliegt DrakX izmainît partîciju tabulu.\n"
-"(kïûda ir %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake neizdevâs pareizi nolasît partîciju tabulu.\n"
-"Turpiniet, ja vçlaties riskçt!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:349
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Izvçlieties partîcijas, ko vçlaties formatçt"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Saknes partîcija"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Kura ir jûsu sistçmas saknes partîcija (/)?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Lai partîciju tabulas izmaiòas stâtos spçkâ, jums jâpârstartç dators"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Izvçlieties partîcijas, ko vçlaties formatçt"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Pârbaudît sliktos blokus?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Formatçju partîcijas"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Veidoju un formatçju failu %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Instalçðanas pabeigðanai nepietiek swap, palieliniet swap"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Meklçju pieejamâs pakotnes"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Meklçju uzlabojamâs pakotnes"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Jûsu sistçmâ vairs nav brîvas vietas instalçðanai vai uzlaboðanai (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Pilna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimâla (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Ieteicama (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Pielâgota"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:525
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Atjanot no disketes"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Atjanot no disketes"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Package selection"
-msgstr "Pakotòu grupu izvçle"
-
-#: ../../install_steps_interactive.pm_.c:532
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Ielieciet disketi iekârtâ %s"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Saglabât disketç"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ja jums ir visi ðajâ sarakstâ norâdîtie CD, nospiediet Labi.\n"
-"Ja jums nav neviena no norâdîtajiem CD, nospiediet Atcelt.\n"
-"Ja trûkst tikai daþu CD, sarakstâ atslçdziet tos un nospiediet Labi."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ar nosaukumu \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalçju pakotni %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Pçcinstalçðanas konfigurçðana"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Ielieciet disketi iekârtâ %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Ielieciet tukðu disketi iekârtâ %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Tagad jums ir iespçja ielâdçt ðifrçðanai nepiecieðamâs programmas.\n"
-"\n"
-"BRÎDINÂJUMS:\n"
-"\n"
-"Sakarâ ar to, ka uz ðo programmu izmantoðanu attiecas daþâdas vispârçjas\n"
-"prasîbas un daþâda likumdoðana, ðo programmu saòçmçjam un/vai gala\n"
-"lietotâjam ir jâpârliecinâs, ka viòa likumdoðana ïauj viòam ielâdçt,\n"
-"glabât un/vai izmantot ðîs programmas.\n"
-"\n"
-"Bez tam saòçmçjam un/vai gala lietotâjam ir jâbût îpaði uzmanîgam, lai\n"
-"nepârkâptu ðo likumdoðanu. Ja saòçmçjs un/vai gala lietotâjs neievçros\n"
-"atbilstoðos likumus, pret viòu tiks pielietotas nopietnas sankcijas.\n"
-"\n"
-"Mandrakesoft vai tâ raþotâji un/vai piegâdâtâji nekâdâ gadîjumâ nebûs\n"
-"atbildîgi par tieðiem, netieðiem vai nejauðiem bojâjumiem (ieskaitot, bet\n"
-"neaprobeþojoties ar ienâkumu zaudçðanu, komercdarbîbas apturçðanu,\n"
-"komerciâlu datu zaudçðanu un citiem finansiâliem zaudçjumiem, un iespçjamu\n"
-"atbildîbu un atlîdzinâjumu, kas bûtu jâmaksâ saskaòâ ar tiesas spriedumu),\n"
-"kas varçtu rasties sakarâ ar programmu lietoðanu, glabâðanu vai vienkârðu\n"
-"ielâdçðanu, kurâm saòçmçjs un/vai gala lietotâjs bûs spçjîgs piekïût\n"
-"pçc ðîs vienoðanâs apstiprinâðanas.\n"
-"\n"
-"\n"
-"Ja jums ir jebkâdi jautâjumi sakarâ ar ðo vienoðanos, lûdzu sazinieties ar\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Izvçlieties spoguïserveri, no kura òemt pakotnes"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Pieslçdzos spoguïserverim, lai saòemtu pieejamo pakotòu sarakstu"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Lûdzu izvçlieties pakotnes, ko vçlaties instalçt"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Kâda ir jûsu laika josla?"
-
-#: ../../install_steps_interactive.pm_.c:813
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Vai datora pulkstenis râda GMT laiku?"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:821
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS serveris"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Attâls CUPS serveris"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Nav printera"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Kopsavilkums"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Pele"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Laika josla"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Printeris"
-
-#: ../../install_steps_interactive.pm_.c:875
-#, fuzzy
-msgid "ISDN card"
-msgstr "Iekðçja ISDN karte"
-
-#: ../../install_steps_interactive.pm_.c:878
-#, fuzzy
-msgid "Sound card"
-msgstr "Standarta"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-#, fuzzy
-msgid "NIS"
-msgstr "Izmantot NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-#, fuzzy
-msgid "Local files"
-msgstr "Lokâls printeris"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "root paroles izvçle"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Bez paroles"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Ðî parole ir pârâk vienkârða (jâbût vismaz %d simbolus garai)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Autentifikâcija"
-
-#: ../../install_steps_interactive.pm_.c:949
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autentifikâcija"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:951
-#, fuzzy
-msgid "LDAP Server"
-msgstr "serveris"
-
-#: ../../install_steps_interactive.pm_.c:957
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Autentifikâcijas NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS domçns"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS serveris"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Pielâgotâ sâknçðanas diskete piedâvâ veidu, kâ sâknçt jûsu Linux sistçmu\n"
-"neatkarîgi no parastâ sâknçtâja. Tas ir noderîgi, ja jûs nevçlaties savâ\n"
-"sistçmâ uzstâdît SILO, vai kâda cita operçtâjsistçma izdzçð SILO,\n"
-"vai arî SILO nedarbojas ar jûsu dzelþu konfigurâciju. Pielâgoto\n"
-"sâknçðanas disketi var izmantot arî kopâ ar Mandrake glâbðanas attçlu,\n"
-"atvieglojot atjaunoðanu pçc smagiem sistçmas bojâjumiem.\n"
-"\n"
-"Ja vçlaties izveidot jûsu sistçmai pielâgotu sâknçðanas disketi,\n"
-"ielieciet sisketi pirmajâ iekârtâ un nospiediet \"Labi\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Pirmâ diskeðu iekârta"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Otrâ diskeðu iekârta"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Izlaist"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Pielâgotâ sâknçðanas diskete piedâvâ veidu, kâ sâknçt jûsu Linux sistçmu\n"
-"neatkarîgi no parastâ sâknçtâja. Tas ir noderîgi, ja jûs nevçlaties savâ\n"
-"sistçmâ uzstâdît LILO (vai grub), vai kâda cita operçtâjsistçma izdzçð\n"
-"LILO, vai arî LILO nedarbojas ar jûsu dzelþu konfigurâciju. Pielâgoto\n"
-"sâknçðanas disketi var izmantot arî kopâ ar Mandrake glabðanas attçlu,\n"
-"atvieglojot atjaunoðanu pçc smagiem sistçmas bojâjumiem. Vai vçlaties\n"
-"izveidot jûsu sistçmai pielâgotu sâknçðanas disketi?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Diemþçl nav pieejama neviena diskeðu iekârta"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Norâdiet diskeðu iekârtu, ko izmanto distetes veidoðanai"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Ielieciet disketi iekârtâ %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Gatavoju sâknçðanas disketi"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Sagatavoju sâknçtâju"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Vai vçlaties izmantot aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Kïûda, instalçjot aboot, \n"
-"vai instalçt piespiedu kârtâ pat tad, ja tiks iznîcinâta pirmâ partîcija?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Sâknçtâja instalçðana"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Sâknçtâja instalçðana neizdevâs. Atklâta ðâda kïûda:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Zems"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Vidçjs"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Augsts"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Izvçlieties droðîbas lîmeni?"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ielieciet tukðu disketi iekârtâ %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Sagatavoju auto instalçðanas disketi"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Daþi soïi nav izpildîti.\n"
-"\n"
-"Vai tieðâm vçlaties iziet tûlît?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Apsveicam, instalçðana ir pabeigta.\n"
-"Izòemiet sâknçðanas datu nesçju un nospiediet ievadu, lai pârstartçtu "
-"datoru.\n"
-"\n"
-"Lai saòemtu informâciju par labojumiem, kas ir pieejami ðim Mandrake Linux\n"
-"izdevumam, skatiet Errata failu, kas atrodams http://www.linux-mandrake."
-"com/.\n"
-"\n"
-"Informâcija par jûsu sistçmas konfigurçðanu ir pieejama Oficiâlâs\n"
-"Mandrake Linux rokasgrâmatas pçcinstalçðanas nodaïâ."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Sagatavot auto instalçðanas disketi"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automâtisks"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Atkârtot"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Saglabât pakotòu izvçli"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux instalçðana %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"   <Tab>/<Alt-Tab> pâriet | <Space> izvçlçties | <F12> uz nâkamo ekrânu"
-
-#: ../../interactive.pm_.c:73
-#, fuzzy
-msgid "kdesu missing"
-msgstr "atmest"
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "Izvçlieties darbîbu"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Izvçrsta"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Lûdzu uzgaidiet"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Izvçrst koku"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Sakïaut koku"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Sakârtots vienâ sarakstâ vai pa grupâm"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Nenoteiktîba (%s), esiet precîzâks\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Slikta izvçle, pamçìiniet vçlreiz\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (noklusçti %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Jûsu izvçle? (noklusçti %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Jûsu izvçle? (noklusçti %s  ievadiet `none', ja nav) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Èehijas (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Vâcijas"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvoraka"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Spânijas"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Somijas"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Francijas"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norvçìijas"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Polijas"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Krievijas"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Zviedrijas"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Apvienotâs Karalistes"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "ASV tastatûra"
-
-#: ../../keyboard.pm_.c:159
-#, fuzzy
-msgid "Albanian"
-msgstr "Irânas"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armçnijas (vecâ)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armçnijas (rakstâmmaðîna)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armçnijas (fonçtiskâ)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidþânas (latîòu)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Beïìijas"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulgârijas"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazîlijas (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Baltkrievijas"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Ðveices (vâcu izvietojums)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Ðveices (franèu izvietojums)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Èehijas (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Vâcijas (bez mçmajiem taustiòiem)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Dânijas"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvoraka (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvoraka (Norvçìijas)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Igaunijas"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzijas (\"krievu\" izvietojums)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzijas (\"latîòu\" izvietojums)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Grieíijas"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Ungârijas"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Horvâtijas"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Izraçlas"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Izraçlas (fonçtiskâ)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Irânas"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islandes"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Itâlijas"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japânas 106 taistiòi"
-
-#: ../../keyboard.pm_.c:201
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Apvienotâs Karalistes"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latîòamerikas"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lietuvas AZERTY (vecâ)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lietuvas AZERTY (jaunâ)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lietuvas \"numuru rinda\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lietuvas \"fonçtiskâ\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "Atraðanâs vieta"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Maíedonijas"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Dânijas"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Polijas (qwerty izvietojums)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Polijas (qwertz izvietojums)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugâles"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Kanâdas (Kvebeka)"
-
-#: ../../keyboard.pm_.c:217
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Krievijas (Yawerty)"
-
-#: ../../keyboard.pm_.c:218
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Krievijas (Yawerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Krievijas (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Slovçnijas"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovâkijas (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovâkijas (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaidþânas (kirilica)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Tai tastatûra"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Tai tastatûra"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turcijas (tradicionâlais \"F\" modelis)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turcijas (modernais \"Q\" modelis)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukrainas"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "ASV tastatûra (starptautiskâ)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vjetnamas \"numuru rinda\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Dienvidslâvijas (latîòu/kirilicas)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cikliski montçðanas punkti %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - pele"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standarta"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Parasta PS2 Wheel pele"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-#, fuzzy
-msgid "1 button"
-msgstr "2 pogas"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Vispârçja"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Ritenis"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "seriâla"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Parasta 2 pogu pele"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Parasta 3 pogu pele"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (seriâla, vecs C7 tips)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 pogas"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 pogas"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "neviens"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Nav peles"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Lûdzu notestçjiet peli"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Lai aktivizçtu peli,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "PAKUSTINIET RITENI!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:415
-#, fuzzy
-msgid "Finish"
-msgstr "Somijas"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Tâlâk ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Atpakaï"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Vai tas ir pareizi?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Pieslçgties Internetam"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Parastâkais veids, kâ pieslçgties ar adsl, ir pppoe.\n"
-"Daþi pieslçgumi izmanto pptp, pavisam nedaudzi dhcp.\n"
-"Ja jûs nezinat, izvçlieties 'izmantot pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "izmantot dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "izmantot pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "izmantot pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Kuru dhcp klientu vçlaties izmantot?\n"
-"Noklusçti ir dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Jûsu sistçmâ nav atrasts neviens ethernet tîkla adapteris.\n"
-"Nevaru uzstâdît ðo pieslçguma veidu."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Izvçlieties tîkla interfeisu"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Lûdzu norâdiet, kuru tîkla adapteri vçlaties izmantot Interneta pieslçgumam."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "tîkla karte nav atrasta"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Konfigurçju tîklu"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Lûdzu ievadiet jûsu resursa vârdu, ja to zinat.\n"
-"Daþu DHCP serveru darbîbai ir nepiecieðams resursa vârds.\n"
-"Resursa vârdam ir jâbût pilnam kvalificçtam resursa vârdam,\n"
-"piemçram, ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Resursa vârds:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Tîkla konfigurçðanas meistars"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Ârçjs ISDN modçms"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Iekðçja ISDN karte"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Kâds ir jûsu ISDN pieslçguma veids?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Tika atklâta ugunsmûra konfigurâcija!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Tika atklâta ugunsmûra konfigurâcija!"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN konfigurâcija"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Izvçlieties pakalpojumu sniedzçju.\n"
-" Ja tas nav ðajâ sarakstâ, izvçlietis Nav sarakstâ"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protokols"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Eiropa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Citur pasaulç"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Citur pasaulç \n"
-" nav D-Channel (izdalîtas lînijas)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Kâdu protokolu vçlaties izmantot?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Kâds ir jûsu kartes tips?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Nezinu"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Ja jums ir ISA karte, vçrtîbâm nâkamajâ ekrânâ jâbût pareizâm.\n"
-"\n"
-"Ja jums ir PCMCIA karte, jums ir jâzina kartes irq un io.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Pârtraukt"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Turpinât"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Kura ir jûsu ISDN karte ?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ir atklâta ISDN PCI karte, bet nav zinâms kartes tips. Lûdzu izvçlieties "
-"kâdu no nâkamajâ ekrânâ uzskaitîtajâm PCI kartçm."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nav atrasta neviena ISDN PCI karte. Lûdzu izvçlieties kâdu no saraksta."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Lûdzu norâdiet, kuram seriâlajam portam ir pieslçgts modçms."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Iezvanpieejas opcijas"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Savienojuma nosaukums"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Telefona numurs"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Lietotâja ID"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Ar skriptu"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Izmantojot terminâli"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Domçna nosaukums"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Pirmais DNS serveris"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Otrais DNS serveris"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Varat atslçgties vai pârkonfigurçt pieslçgumu."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Varat pârkonfigurçt pieslçgumu."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Paðlaik jûs esat pieslçdzies Internetam."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Varat pieslçgties Internetam vai pârkonfigurçts pieslçgumu."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Paðlaik jûs neesat pieslçdzies Internetam."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Pieslçgties Internetam"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Atslçgties no Interneta"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Konfigurçt tîkla pieslçgumu (LAN vai Interneta)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Interneta pieslçgums un konfigurâcija"
-
-#: ../../network/netconnect.pm_.c:96
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Varat atslçgties vai pârkonfigurçt pieslçgumu."
-
-#: ../../network/netconnect.pm_.c:105
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Varat atslçgties vai pârkonfigurçt pieslçgumu."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Tîkla konfigurâcija"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Izvçlieties konfigurçjamo profilu"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Noskaidroju ierîces..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Parasts modçma pieslçgums"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "atklâts uz porta %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN pieslçgums"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "atklâts %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, fuzzy
-msgid "ADSL connection"
-msgstr "LAN pieslçgums"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "atklâts uz interfeisa %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Kabeïa pieslçgums"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Kabeïa pieslçgums"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "LAN pieslçgums"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "ethernet karte(s) atrasta"
-
-#: ../../network/netconnect.pm_.c:190
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Izvçlieties izmantojamo rîku"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:215
-#, fuzzy
-msgid "Internet connection"
-msgstr "Interneta pieslçguma koplietoðana"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Vai vçlaties startçt pieslçgumu palaiðanas laikâ?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Tîkla konfigurâcija"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Vai vçlaties pârstartçt tîklu"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"BRÎDINÂJUMS: Ðî ierîce jau agrâk ir konfigurçta, lai pieslçgtos Internetam.\n"
-"Vienkârði apstipriniet, ka vçlaties saglabât ðo konfigurâciju.\n"
-"Tâlâko lauku izmainîðana pârrakstîs ðo konfigurâciju."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Lûdzu ievadiet ðî datora IP konfigurâciju.\n"
-"Visi dati jâievada kâ IP adreses ar punktiem atdalîtu decimâlu\n"
-"skaitïu veidâ (piemçram, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurçju tîkla iekârtu %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (draiveris %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP adrese"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Tîkla maska"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Automâtisks IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adreses formâtam jâbût 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Lûdzu ievadiet resursa vârdu.\n"
-"Resursa vârdam ir jâbût pilnam kvalificçtam resursa vârdam,\n"
-"piemçram, ``mybox.mylab.myco.com''.\n"
-"Jûs varat ievadît arî vârtejas IP adresi, ja tâda ir"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS serveris"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Vârteja"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Vârtejas ierîce"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Proxy serveru konfigurâcija"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Proxy bûtu jâbût http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Proxy bûtu jâbût ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Interneta konfigurâcija"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Vai vçlaties mçìinât pieslçgties internetam tûlît?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Izmçìinu pieslçgumu..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Sistçma paðlaik ir pieslçgta Internetam."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Ðíiet, ja jûsu sistçmu nav pieslçgta Internetam.\n"
-"Mçìiniet pârkonfigurçt pieslçgumu."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Savienojuma konfigurçðana"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Lûdzu aizpieldiet vai izvçlietis lauku"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "Kartes IRQ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Kartes mem (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "Kartes IO"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "Kartes IO_0"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "Kartes IO_1"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Jûsu privâtais telefona numurs"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Pakalpojumu sniedzçja nosaukums (piem., provider.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Pakalpojumu sniedzçja telefona numurs"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "Provaidera dns 1 (nav obligâti)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "Provaidera dns 2 (nav obligâti)"
-
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "Tastatûras izvçle"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Zvanîðanas reþîms"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-#, fuzzy
-msgid "Connection speed"
-msgstr "Savienojuma tips: "
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Savienojuma tips: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Konta nosaukums (lietotâja vârds)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Konta parole"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Ðai platformai paplaðinâtâ partîcija nav pieejama"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Jûsu diska partîciju tabulâ ir caurums, bet es to nevaru izmantot.\n"
-"Vienîgais risinâjums ir pârvietot primâras partîcijas tâ, lai caurums "
-"atrastos blakus paplaðinâtajâm partîcijâm"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Atjaunoðana no faila %s neizdevâs: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Kïûda, ierakstot failâ %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "nepiecieðama"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "svarîga"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "ïoti derîga"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "derîga"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "varbût"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Lokâls printeris"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Attâls printeris"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Attâls CUPS serveris"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Attâls lpd serveris"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Tîkla printeris (socket)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Printera serveris"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Printera ierîces URI"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modulis %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Izvçlieties printera pieslçgumu"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kâ ðis printeris ir pieslçgts?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"Izmantojot attâlu CUPS serveri, ðeit jums nav nepiecieðams\n"
-"konfigurçt printeri; printeri tiks atrasti automâtiski.\n"
-"Ja jûs ðaubaties, izvçlieties \"Attâls CUPS serveris\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Nevienu"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Norâdiet noklusçto lietotâju:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-#, fuzzy
-msgid "Close"
-msgstr "Pele"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "Attâls printeris"
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adreses formâtam jâbût 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Porta numuram ir jâbût skaitlim"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "Lokâls printeris"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "CUPS servera IP"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Ports"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Sâknçðanas stila konfigurçðana"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Noskaidroju ierîces..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Pârbaudît portus"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Printeris, modelis \"%s\", atrasts pie "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Lokâlâ printera ierîce"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Kurai ierîcei ir pieslçgts printeris\n"
-"(atcerieties, ka /dev/lp0 atbilst LPT1:)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Printera ierîce"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Nolasu CUPS draiveru datubâzi..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Attâla lpd printera opcijas"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Lai izmantotu attâlu lpd drukas rindu, jums jânorâda\n"
-"printera servera resursa vârds un tâs servera rindas\n"
-"nosaukums, kurai jâadresç drukas uzdevumi."
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "Attâlâ resursa vârds"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Attâls printeris"
-
-#: ../../printerdrake.pm_.c:320
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Attâlâ resursa vârds"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Attâlâ resursa vârds"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) printera opcijas"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Lai drukâtu ar SMB printeri, jums jânorâda SMB resursa vârds\n"
-"(Piezîme! Tas var atðíirties no datora TCP/IP vârda!)\n"
-"un, iespçjams, ðî servera IP adrese, kâ arî jûs interesçjoðâ printera\n"
-"koplietojuma vârds un atbilstoðs lietotâja vârds, parole un\n"
-"darba grupas informâcija."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "SMB servera resurss"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "SMB servera IP"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Koplietojuma vârds"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Darba grupa"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "NetWare printera opcijas"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Lai drukâtu ar NetWare printeri, jums jânorâda NetWare\n"
-"printera servera vârds (Piezîme! tas var atðíirties no servera\n"
-"TCP/IP resursa vârda!), kâ arî jûsu izvçlçtâ printera rindas\n"
-"nosaukums un jebkurð atbilstoðs lietotâja vârds un parole."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Printera serveris"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Printera rindas nosaukums"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Socket printera opcijas"
-
-#: ../../printerdrake.pm_.c:528
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Lai drukâtu ar socket printeri, jums ir jânorâda printera\n"
-"resursa vârds tîklâ un papildus arî porta numurs."
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "Printera resursa vârds"
-
-#: ../../printerdrake.pm_.c:537
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Printera resursa vârds"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Printera ierîces URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Printera nosaukums"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Apraksts"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Atraðanâs vieta"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Nolasu CUPS draiveru datubâzi..."
-
-#: ../../printerdrake.pm_.c:793
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Printera pieslçgums"
-
-#: ../../printerdrake.pm_.c:794
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Kâds ir jûsu printera tips?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Interneta konfigurâcija"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Interneta konfigurâcija"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Vai vçlaties izmçìinât printeri?"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "Pârbaudît portus"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-#, fuzzy
-msgid "No test pages"
-msgstr "Jâ, izdrukât abas izmçìinâjuma lapas"
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "Printeris"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standarta"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Tiek drukâta(s) izmçìinâjuma lapa(s)..."
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "Tiek drukâta(s) izmçìinâjuma lapa(s)..."
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Tiek drukâta(s) izmçìinâjuma lapa(s)..."
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Izmçìinâjuma lapa(s) ir nosûtîta(s) printera demonam.\n"
-"It may take some time before the printer starts.\n"
-"Var paiet zinâms laiks, pirms printeris sâk drukât.\n"
-"Izdrukas stâvoklis:\n"
-"%s\n"
-"\n"
-"Vai tas darbojas pareizi?"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Izmçìinâjuma lapa(s) ir nosûtîta(s) printera demonam.\n"
-"Var paiet zinâms laiks, pirms printeris sâk drukât.\n"
-"Vai tas darbojas pareizi?"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Nav printera"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Atslçdzu tîklu"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "Printera opcijas"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Nolasu CUPS draiveru datubâzi..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Interneta konfigurâcija"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "Nav printera"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Nolasu CUPS draiveru datubâzi..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Konfigurâcija"
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Izmçìinu pieslçgumu..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Tîkla konfigurçðana"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitors nav konfigurçts"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Konfigurçju tîklu"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Kuru drukâðanas sistçmu vçlaties izmantot?"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Augsts"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoisks"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Kuru drukâðanas sistçmu vçlaties izmantot?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Izvçlieties printera pieslçgumu"
-
-#: ../../printerdrake.pm_.c:1728
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Kuru drukâðanas sistçmu vçlaties izmantot?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigurçt printeri"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Printera opcijas"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Nolasu CUPS draiveru datubâzi..."
-
-#: ../../printerdrake.pm_.c:1845
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Vai vçlaties konfigurçt printeri?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Noklusçts)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Attâls CUPS serveris"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "Attâls CUPS serveris"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-#, fuzzy
-msgid "Add printer"
-msgstr "Nav printera"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Vai vçlaties izmçìinât ðo konfigurâciju?"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Interneta konfigurâcija"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Interneta pieslçguma koplietoðana"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Printera pieslçgums"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "Tiek drukâta(s) izmçìinâjuma lapa(s)..."
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "Attâls printeris"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Nolasu CUPS draiveru datubâzi..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Vai vçlaties pârstartçt tîklu"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Nolasu CUPS draiveru datubâzi..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Proxy serveru konfigurâcija"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Ports"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Proxy bûtu jâbût http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "Porta numuram ir jâbût skaitlim"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Proxy bûtu jâbût ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Autoreìistrçðanâs"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Parole"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Bez paroles"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Paroles nesakrît"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nevar pievienot partîciju _formatçtam_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Neizdodas ierakstît failu %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid neizdevâs"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid neizdevâs (varbût nav uzstâdîti raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nepietiek diska partîciju RAID lîmenim %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron ir periodisku komandu plânotâjs."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd paredzçts baterijas stâvokïa novçroðanai un grâmatoðanai ar syslog.\n"
-"To var izmantot arî datora izslçgðanai, kad baterija ir izlâdçta."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Palaiþ komandas, kas ir ieplânotas noteiktâ laikâ, izmantojot at komandu,\n"
-"kâ arî palaiþ komadu paketes, kad vidçjâ sistçmas noslodze ir pietiekoði\n"
-"zema."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron ir parasta UNIX programma, kas palaiþ lietotâju norâdîtâs programmas\n"
-"periodiski ieplânotos laikos. vixie cron piedâvâ virkni papildus\n"
-"iespçju salîdzinot ar UNIX cron, tajâ skaitâ arî labâku droðîbu un daudz\n"
-"izvçrtstâkas konfigurçðanas iespçjas."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM nodroðina peles atbalstu daþâdâm teksta reþîma Linux programmâm,\n"
-"piemçram, Midnight Commander. Tas arî ïauj no konsoles ar peli veikt\n"
-"izgriezt-un-iespraust operâcijas, kâ arî piedâvâ izlecoðo izvçlòu\n"
-"atbalstu konsolei."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache ir Vispasaules tîmekïa (WWW) serveris. Tas tiek izmantots HTML\n"
-"failu un CGI izplatîðanai."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Interneta superservera demons (parasti saukts par inetd) pçc vajadzîbas\n"
-"startç daþâdus interneta servisus. Tas it atbildîgs par daudzu servisu\n"
-"startçðanu, tajâ skaitâ telnet, ftp, rsh un rlogin. inetd atslçgðana\n"
-"atslçdz arî visus servisus, par kuriem tas atbild."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ðî pakotne ielâdç izvçlçto tastatûras karti, kas norâdîta failâ\n"
-"/etc/sysconfig/keyboard. To var izvçlçties, izmantojot programmu kbdconfig.\n"
-"Vairumâ gadîjumu ðo pakotni ir jâatstâj izvçlçtu."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd ir drukas demons, kas ir nepiecieðams lpr pareizai darbîbai. Tas ir\n"
-"serveris, kas nosûta drukas uzdevumus printeri(e)m."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) ir domçnu vârdu serveris (DNS), kas tiek izmantots resursu\n"
-"vârdiem atbilstoðo IP adreðu noskaidroðanai."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Mounts un unmounts ir Tîkla Failu sistçmas (NFS), SMB (Lan\n"
-"Manager/Windows) un NCP (NetWare) montçðanas punkti."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivizç/Deaktivizç visus tîkla interfeisus, kas ir konfigurçti\n"
-"startçðanai sistçmas sâknçðanas laikâ."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ir populârs protokols failu koplietoðanai TCP/IP tîklos.\n"
-"Ðis serviss nodroðina NFS servera funkcionalitâti, un to var konfigurçt\n"
-"ar faila /etc/exports palîdzîbu."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ir populârs protokols failu koplietoðanai TCP/IP tîklos.\n"
-"Ðis serviss nodroðina NFS failu aizslçgðanas funkcionalitâti."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA atbalsts parasti ir paredzçts, piemçram, tîkla karðu un modçmu\n"
-"uzturçðanai pârnçsâjamos datoros. Tas netiks startçts, ja nav konfigurçts,\n"
-"tâpçc ir droði to instalçt datoros, kam tas nav nepiecieðams."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper apkalpo RPC pieslçgumus, ko izmanto citi protokoli,\n"
-"piemçram, NFS un NIS. portmap serveri ir jâizmanto datoros, kas\n"
-"darbojas kâ RPC protokolus izmantojoðu protokolu serveri."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix ir Pasta Transporta Aìents, un tâ ir programma, kas pârvieto\n"
-"pastu no viena datora uz citu."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Saglabâ un atjauno sistçmas entropijas krâtuvi, lai ìenerçtu\n"
-"kvalitatîvâkus gadîjumskaitïus."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed demons ïauj automâtiski atjauninât IP marðrutizatora tabulu,\n"
-"izmantojot RIP protokolu. Kaut gan RIP tiek plaði izmantots nelielos\n"
-"tîklos, sareþìîtâkiem tîkliem ir nepiecieðami sareþìîtâki marðrutizçðanas\n"
-"protokoli."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokols ïauj tîkla lietotâjiem saòemt veiktspçjas\n"
-"informâciju par jebkuru ðî tîkla datoru."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Protokols rusers tîkla lietotâjiem ïauj noskaidrot, kuru lietotâju\n"
-"sesijas ir atvçrtas citos atbildoðajos datoros."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Protokols rwho attâliem lietotâjiem ïauj saòemt visu atvçrto lietotâju\n"
-"sesiju sarakstu no datora, kurâ darbojas rwho demons (lîdzîgi finger)."
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Palaist X-Window sistçmu startçðanas laikâ"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog ir mehânisms, ko daudzi demoni izmanto ziòojumu grâmatoðanai\n"
-"daudzos sistçmas þurnâlu failos. Ir gudra doma vienmçr darbinât syslog."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:88
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Startç un aptura X Fontu Serveri sâknçðanas un aizvçrðanas laikâ."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Izvçlçties, kurus servisus vajag automâtiski startçt ielâdes laikâ"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "Printeris"
-
-#
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internets"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "Sistçmas reþîms"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Attâla lpd printera opcijas"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Serveris, Datubâzes"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "ierîce"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Uzmanîbu"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Papildinât"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Yaboot"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instalçju pakotni %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Man neizdodas nolasît partîciju tabulu, priekð manis tâ ir pârâk bojâta :(\n"
-"Es mçìinâðu turpinât, atslçdzot sliktâs partîcijas"
-
-#: ../../standalone/drakautoinst_.c:44
-#, fuzzy
-msgid "Error!"
-msgstr "Kïûda"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Pçcinstalçðanas konfigurçðana"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Sâknçðanas stila konfigurçðana"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Apsveicam!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Interneta pieslçguma koplietoðana"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Interneta pieslçguma koplietoðana paðlaik ir ieslçgta"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneta pieslçguma koplietoðana jau ir uzstâdîta.\n"
-"Paðlaik tâ ir ieslçgta.\n"
-"\n"
-"Ko jûs vçlaties darît?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "atslçgt"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "atmest"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "pârkonfigurçt"
-
-#: ../../standalone/drakgw_.c:127
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "Noskaidroju ierîces..."
-
-#: ../../standalone/drakgw_.c:135
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Interneta pieslçguma koplietoðana paðlaik ir atslçgta"
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Interneta pieslçguma koplietoðana paðlaik ir atslçgta"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneta pieslçguma koplietoðana jau ir uzstâdîta.\n"
-"Paðlaik tâ ir atslçgta.\n"
-"\n"
-"Ko jûs vçlaties darît?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "ieslçgt"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:161
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Interneta pieslçguma koplietoðana paðlaik ir ieslçgta"
-
-#: ../../standalone/drakgw_.c:182
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Datoru var konfigurçt tâ, lai kopîgi izmantotu Interneta pieslçgumu.\n"
-"\n"
-"Piezîme: jums ir nepiecieðams atseviðís tîkla adapteris, lai uzstâdîtu "
-"lokâlo datortîklu (LAN).\n"
-"\n"
-"Vai vçlaties uzstâdît Interneta pieslçguma koplietoðanu?"
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#
-#: ../../standalone/drakgw_.c:209
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Interfeiss"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Jûsu sistçmâ nav tîkla adaptera!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Jûsu sistçmâ nav atrasts neviens ethernet tîkla adapteris. Lûdzu izmantojiet "
-"dzelþu konfigurçðanas rîku."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Tîkla interfeiss"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Jûsu sistçmâ ir tikai viens konfigurçts tîkla adapteris:\n"
-"\n"
-"%s\n"
-"\n"
-"Vai vçlaties uzstâdît jûsu lokâlo datortîklu ar ðo adapteri?"
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Lûdzu izvçlieties, kurð tîkla adapteris bûs pieslçgts jûsu lokâlajam "
-"datortîklam."
-
-#: ../../standalone/drakgw_.c:243
-#, fuzzy
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Brîdinâjums, tîkla adapteris jau ir konfigurçts.\n"
-"Vai vçlaties to konfigurçt atkârtoti?"
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Potenciâls LAN adreðu konflikts atklâts ðajâ %s! konfigurâcijâ!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Tika atklâta ugunsmûra konfigurâcija!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Brîdinâjums! Ir atklâta eksistçjoða ugunsmûra konfigurâcija. Pçc "
-"instalçðanas jums varbût vajadzçs patstâvîgi pielabot konfigurâciju."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Konfigurçju..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Tiek konfigurçti skripti, instalçtas programmas, startçti serveri..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problçmas, instalçjot pakotni %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Viss ir konfigurçts.\n"
-"Tagad jûs varat dalîties Interneta pieslçgumâ ar citiem jûsu lokâlajam\n"
-"datortîklam pieslçgtiem datoriem, izmantojot automâtisku tîkla "
-"konfigurçðanu\n"
-"(DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-#, fuzzy
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Interneta pieslçguma koplietoðana jau ir uzstâdîta.\n"
-"Paðlaik tâ ir atslçgta.\n"
-"\n"
-"Ko jûs vçlaties darît?"
-
-#: ../../standalone/drakgw_.c:618
-#, fuzzy
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"Interneta pieslçguma koplietoðana jau ir uzstâdîta.\n"
-"Paðlaik tâ ir ieslçgta.\n"
-"\n"
-"Ko jûs vçlaties darît?"
-
-#: ../../standalone/drakgw_.c:619
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Interneta pieslçguma koplietoðana paðlaik ir ieslçgta"
-
-#: ../../standalone/drakgw_.c:624
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Interneta pieslçgums un konfigurâcija"
-
-#: ../../standalone/drakgw_.c:631
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Interneta pieslçguma koplietoðana"
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Tîkla konfigurâcija (%d adapteri)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profils: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Dzçst profilu..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Dzçðamais profils:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Jauns profils..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Resursa vârds: "
-
-#
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Interneta pieeja"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Tips:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Vârteja:"
-
-#
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "interfeiss:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Stâvoklis:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-#, fuzzy
-msgid "Connected"
-msgstr "Nav pieslçgts"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Nav pieslçgts"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:215
-#, fuzzy
-msgid "Starting your connection..."
-msgstr "Izmçìinu pieslçgumu..."
-
-#: ../../standalone/draknet_.c:223
-#, fuzzy
-msgid "Closing your connection..."
-msgstr "Izmçìinu pieslçgumu..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "The system is now disconnected."
-msgstr "Sistçma paðlaik ir pieslçgta Internetam."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Konfigurçt Interneta pieeju..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "LAN konfigurâcija"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Draiveris"
-
-#
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Interfeiss"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "Protocol"
-msgstr "Protokols"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "State"
-msgstr "Stâvoklis:"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Konfigurçt lokâlo datortîklu..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:325
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Konfigurâcijas izmçìinâðana"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "LAN konfigurâcija"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapteris %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP klients"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "activate now"
-msgstr "Aktîva"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "desactivate now"
-msgstr "Aktîva"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Interneta pieslçguma konfigurâcija"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Interneta pieslçguma konfigurâcija"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Savienojuma tips: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parametri"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Ethernet karte"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP klients"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Sveiciens hakeriem"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Vâjð"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoisks"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ðo lîmeni ir jâizmanto uzmanîgi. Tas padara jûsu sistçmu vieglâk\n"
-"izmantojamu, taèu ïoti nedroðu: to nedrîkst izmantot datoram, kas ir\n"
-"pieslçgts citiem datoriem vai Internetam. Netiek prasîtas paroles."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Tagad tiek izmantota parole, taèu izmantot datoru tîklâ vçl aizvien\n"
-"nav ieteicams."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Daþi uzlabojumi ðim droðîbas lîmenis, un galvenais ir tas, ka tagad ir\n"
-"vairâk droðîbas brîdinâjumu un pârbauþu."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Ðis ir parasts droðîbas lîmenis, kas ir ieteicams datoram, kas tiks\n"
-"izmantots kâ klients Interneta pieslçgumam. Tagad tiek pârbaudîta droðîba. "
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Ar ðo droðîbas lîmeni sistçmu var sâkt izmantot kâ serveri.\n"
-"Droðîba tagad ir pietiekoði augsta, lai izmantotu sistçmu kâ serveri, kas\n"
-"apkalpo pieslçgumus no daudziem klientiem. "
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Mçs izmantojam 4. lîmeòa iespçjas, taèu tagad sistçma ir pilnîbâ\n"
-"aizslçgta. Droðîba tagad ir maksimâlajâ lîmenî."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "Uzstâdu droðîbas lîmeni"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Norâdiet servera opcijas"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Uzstâdu droðîbas lîmeni"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Pieslçgties Internetam"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Izvçlieties izmantojamo rîku"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "pielietojums: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Vai vçlaties, lai BackSpace konsolç darbotos kâ Delete?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Nomainiet Cd-Rom"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Lûdzu ielieciet instalâcijas Cd-Rom un nospiediet Labi, kad tas izdarîts.\n"
-"Ja jums nav ðî diska, nospiediet Atcelt, lai neuzsâktu uzlaboðanu no tîkla."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Neizdodas uzsâkt uzlaboðanu no tîkla !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "nav atrasta seriâla_usb\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Vai emulçt treðo pogu?"
-
-#: ../../standalone/tinyfirewall_.c:29
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Tika atklâta ugunsmûra konfigurâcija!"
-
-#: ../../standalone/tinyfirewall_.c:42
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Tika atklâta ugunsmûra konfigurâcija!"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Valodas izvçle"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Instalçðanas klases izvçle"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Cietâ diska noteikðana"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Peles konfigurçðana"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Tastatûras izvçle"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr ""
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Failu sistçmu uzstâdîðana"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Diska formatçðana"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Instalçjamo pakotòu izvçle"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Sistçmas instalçðana"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Lietotâju pievienoðana"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Tîkla konfigurçðana"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Servisu konfigurçðana"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Sistçmdisketes radîðana"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Sâknçtâja instalçðana"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X konfigurçðana"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Instalçðanas beigas"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, fuzzy, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Adapteris %s: %s"
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Kïûda, atverot %s ierakstîðanai: %s"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Serveris, Tîmeklis/FTP"
-
-#
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Tîkla dators, X klients"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Birojs"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome darbastacija"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Rîki darbam ar Palm Pilot vai Visor"
-
-#
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "KDE darbastacija"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Serveris, Ugunsmûris/Marðrutizators"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Biroja programmas: teksta procesori (kword, abiword), izklâjlapas (lspread, "
-"gnumeric), pdf skatîtâji, u.c."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio rîki: mp3 un midi atskaòotâji, mikðeri u.c."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Grâmatas un Howto faili par Linux un Brîvo programmatûru"
-
-#
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE darbastacija"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm u.c."
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimçdiji - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Rîki pastam, jaunumiem, tîmeklim, failu saòemðanai un èatam"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Serveris, Datubâzes"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Vai vçlaties izmçìinât ðo konfigurâciju?"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimçdiji - Skaòa"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilîti"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentâcija"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsoles rîki"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Interneta dators"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimçdiju dators"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN konfigurâcija"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Citas grafiskas darbavirsmas (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, galvenâ grafiskâ vide kopa ar papildus rîku kolekciju"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Development"
-msgstr "Izstrâde, Tîmeklis"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Rîki CD disku radîðanai un ierakstîðanai"
-
-#
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Biroja dators"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm u.c."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafiskâs programmas, piemçram, The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C un C++ izstrâdes bibliotçkas, programmas un include faili"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Serveris, Tîkla datora serveris"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Serveris, Pasts/Grupu rîki/Jaunumi"
-
-#
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Spçïu dators"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video atskaòotâji un redaktori"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimçdiji - Grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Izklaides programmas: arkâde, galdiòspçles, stratçìija u.c."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Rîku komplekts, lai lasîtu un sûtîtu pastu vai jaunumus (pine, mutt, tin..) "
-"un pârlûkotu Tîmekli"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arhivçðana, emulatori, novçroðana"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Personîgâs finanses"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafiskâ vide ar lietotajiem draudzîgu programmu komplektu un darbavirsmas "
-"rîkiem"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Interneta pieeja"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Skaòas un video atskaòoðanas/rediìçðanas programmas"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Citas grafiskâs darbavirsmas"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Redaktori, èaulas, failu rîki, terminâïi"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programmas jûsu finanðu pârvaldîðanai, piemçram, gnucach"
-
-#
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Spçles"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Personîgâs informâcijas menedþments"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimçdiji - CD ierakstîðana"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Zinâtniskâ darbastacija"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "lasîðanai nevar atvçrt /etc/sysconfig/autologin: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Vai vçlaties pârstartçt tîklu"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Vai jûs piekrîtat?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Gatavojos pârstartçt tîkla ierîci:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Gatavojos pârstartçt tîkla ierîci %s. Vai piekrîtat?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Ja vien jûs neesat pârliecinâts par citu izvçli, parasti ir jâizvçlas\n"
-#~ "\"/dev/hda\" (primârais galvenais IDE disks) vai \"/dev/sda\" (pirmais\n"
-#~ "SCSI disks)."
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Eksistç sekojoðas drukas rindas.\n"
-#~ "Jûs varat pievienot jaunass vai izmainît esoðâs."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Savienojuma tips: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Norâdiet noklusçto lietotâju:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Lûdzu notestçjiet peli"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Lûdzu norâdiet vçlamo instalçðanas un sistçmas izmantoðanas valodu."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Lai turpinâtu instalçðanu, jums ir jâpieòem ðîs licences nosacîjumi.\n"
-#~ "\n"
-#~ "\n"
-#~ "Nospiediet \"Pieòemt\", ja piekrîtat nosacîjumiem.\n"
-#~ "\n"
-#~ "\n"
-#~ "Nospiediet \"Noraidît\", ja nepiekrîtat nosacîjumiem. Instalçðana tiks "
-#~ "pârtraukta bez paðreizçjâs\n"
-#~ "konfigurâcijas izmaiòâm."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Sarakstâ norâdiet jûsu tastatûrai atbilstoðu izkârtojumu"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Ja vçlaties, lai citas valodas (izòemot to, ko norâdîjât instalçðanas\n"
-#~ "sâkumâ) bûtu pieejamas pçc instalçðanas, lûdzu norâdiet tâs augstâk\n"
-#~ "esoðajâ sarakstâ. Ja vçlaties izmantot visas, nospiediet \"Viss\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Izvçlieties:\n"
-#~ "\n"
-#~ "  - Pielâgota: Ja pietiekami labi pârzinat GNU/Linux, jums tiks dota\n"
-#~ "    iespçja norâdît sistçmu pielietojumu. Sîkâka informâcija bûs\n"
-#~ "    pieejam vçlâk.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Eksperta: Noderçs, ja jûs labi pârzinat GNU/Linux un vçlaties veikt\n"
-#~ "    precîzi pielâgotu instalâciju. Tâpat kâ pielâgotas instalâcijas\n"
-#~ "    gadîjumâ, jums tiks dota iespçja norâdît sistçmas pielietojumu.\n"
-#~ "    Tomçr lûdzu, NEIZVÇLIETIES ÐO, JA JÛS NEESAT PÂRLIECINÂTS PAR\n"
-#~ "    SAVU RÎCÎBU!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Tagad jums ir jânorâda maðînas pielietojums. Varat izvçlçties:\n"
-#~ "\n"
-#~ "* Darbastacija: ðî ir ideâla izvçle, ja plânojat sistçmu galvenokârt "
-#~ "izmantot ikdienas vajadzîbâm birojâ vai mâjâs.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Izstrâdei: ja plânojat sistçmu izmantot galvenokârt programmatûras "
-#~ "izstrâdei, ðî ir laba izvçle. Ðajâ\n"
-#~ " gadîjumâ tiks instalçts pilns programmu komplekts, lai jûs varçtu "
-#~ "kompilçt, atkïûdot un formatçt sâkumkodu vai\n"
-#~ " veidot programmatûras pakotnes.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Serveris: ja plânojat sistçmu izmantot kâ serveri, ðî ir laba izvçle. "
-#~ "Tas var bût failu serveris (NFS vai\n"
-#~ " SMB), drukas serveris (Unix stila vai Microsoft Windows stila), "
-#~ "autentificçðanas serveris (NIS),\n"
-#~ " datubâzu serveris utt. Ðajâ gadîjumâ neceriet, ka tiks instalçti kâdi "
-#~ "izskaistinâjumi (KDE, GNOME, un tml.)."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Tagad varat izvçlçties instalçjamo vai uzlabojamo pakotòu grupu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pçc tam DrakX pârbaudîs, vai pietiek vietas to visu instalçðanai.\n"
-#~ "Ja nav vietas, jûs brîdinâs par to. Ja vçlaties turpinât, neskatoties\n"
-#~ "uz to, izvçlçto grupu instalçðana turpinâsies, taèu tiks izlaistas\n"
-#~ "daþas mazâk noderîgas pakotnes. Saraksta apakðâ varat izvçlçties\n"
-#~ "opciju \"Atseviðíu pakotòu izvçle\"; ðajâ gadîjumâ jums vajadzçs\n"
-#~ "caurskatît vairâk nekâ 1000 pakotòu sarakstu..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Tagad jûs varat atseviðíi izvçlçties visas pakotnes, ko gribat "
-#~ "insrtalçt.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jûs varat izvçstr vai sakïaut koku, noklikðíinot uz opcijâm pakotòu loga\n"
-#~ "kreisajâ stûrî.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja jûs vçlaties redzçt visas sakotnes sakârtotas alfabçta secîbâ,\n"
-#~ "noklikðíiniet uz ikonas \"Sakârtots vienâ sarakstâ vai pa grupâm\"\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja jûs nevçlaties, lai jûs brîdina par atkarîbâm, noklikðíiniet uz\n"
-#~ "\"Automâtiskas atkarîbas\". Ja jûs tâ izdarât, òemiet vçrâ, ka "
-#~ "atteikðanâs\n"
-#~ "no vienas pakotnes var izsaukt atteikðanos no vairâkâm citâm pakotnçm,\n"
-#~ "kas ir no tâs atkarîgas."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Ja jums ir visi ðajâ sarakstâ norâdîtie CD, nospiediet Labi.\n"
-#~ "Ja jums nav neviena no norâdîtajiem CD, nospiediet Atcelt.\n"
-#~ "Ja trûkst tikai daþu CD, sarakstâ atslçdziet tos un nospiediet Labi."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Ja vçlaties savu datoru pieslçgt Internetam vai lokâlam datortîklam,\n"
-#~ "lûdzu izvçlieties pareizu opciju. Lûdzu vispirms ieslçdziet attiecîgu\n"
-#~ "ierîci, pirms izvçlaties opciju, lai DrakX noteiktu to automâtiski.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja jums nav nekâda pieslçguma Internetam vai lokâlam datortîklam,\n"
-#~ "izvçlieties \"Atslçgt tîklu\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja jûs vçlaties konfigurçt tîklu vçlâk pçc instalçðanas, vai arî esat\n"
-#~ "jau pabeiguði konfigurçt jûsu tîkla pieslçgumu, izvçlieties \"Izdarîts\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Modçms nav atrasts. Lûdzu norâdiet, kuram seriâlajam portam tas "
-#~ "pieslçgts.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jûsu zinâðanai, pirmais seriâlais ports (ko Microsoft Windows sauc par\n"
-#~ "\"COM1\") Linux vidç tiek saukts par \"ttyS0\"."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Tagad jûs varat ievadît iezvanpieejas opcijas. Ja jûs nezinat vai neesat\n"
-#~ "pârliecinâts, ko ievadît, pareizu informâciju var saòemt no jûsu "
-#~ "Interneta\n"
-#~ "pakalpojumu sniedzçja. Ja jûs ðeit neievadât DNS (vârdu servera) "
-#~ "informâciju,\n"
-#~ "ðî informâcija tiks iegûta no jûsu Interneta pakalpojumu sniedzçja\n"
-#~ "pieslçgðanâs laikâ."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Ja jums ir ârçjs modçms, lûdzu ieslçdziet to un ïaujiet DrakX to noteikt "
-#~ "automâtiski."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Lûdzu ieslçdziet jûsu modçmu un norâdiet pareizo modeli."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Ja jûs neesat pârliecinâts, vai augstâk esoðâ informâcija ir pareiza, "
-#~ "vai\n"
-#~ "arî jûs nezinat vai neesat pârliecinâts, ko ievadît, pareizu informâciju\n"
-#~ "var saòemt no jûsu Interneta pakalpojumu sniedzçja. Ja jûs ðeit "
-#~ "neievadât\n"
-#~ "DNS (vârdu servera) informâciju, ðî informâcija tiks iegûta no jûsu\n"
-#~ "Interneta pakalpojumu sniedzçja pieslçgðanâs laikâ."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Tagad varat ievadît jûsu datora vârdu, ja tas nepiecieðamas.\n"
-#~ "Ja jûs to nezinat vai neesat pârliecinâts, ko ievadît, pareizu "
-#~ "informâciju\n"
-#~ "var saòemt no jûsu Interneta pakalpojumu sniedzçja."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Tagad varat konfigurçt tîkla ierîci.\n"
-#~ "\n"
-#~ "   * IP adrese: ja to nezinat vai neesat pârliecinâts, pajautâjiet tîkla "
-#~ "administratoram.\n"
-#~ "     Jums nav jâievada IP adrese, ja zemâk izvçlaties \"Automâtisks IP"
-#~ "\".\n"
-#~ "\n"
-#~ "  - Tîklamaska: \"255.255.255.0\" parasti ir laba izvçle. Ja nezinat vai "
-#~ "neesat pârliecinâts, pajautâjiet\n"
-#~ "tîkla administratoram.\n"
-#~ "\n"
-#~ "  - Automâtisks IP: ja jûsu datortîkls izmanto BOOTP vai DHCP protokolu, "
-#~ "izvçlieties ðo opciju. Kad tâ izvçlçta,nnav jânorâda \"IP addrese\". Ja "
-#~ "nezinat vai neesat pârliecinâts, pajautâjiet tîkla administratoram."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Tagad varat ievadît jûsu datora vârdu, ja tas nepiecieðamas.\n"
-#~ "Ja jûs to nezinat vai neesat pârliecinâts, pajautâjiet tîkla "
-#~ "administratoram."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Tagad varat ievadît jûsu datora vârdu, ja tas nepiecieðams.\n"
-#~ "Ja nezinat vai neesat pârliecinâts, atstâjiet tukðu."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Tagad jûs varat ievadît iezvanîðanâs opcijas. Ja jûs nezinat, ko "
-#~ "ievadît,\n"
-#~ "vajadzîgo informâciju var saòemt no jûsu ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Ja jûs izmantosit proxy serverus, lûdzu konfigurçjiet tos. Ja jûs\n"
-#~ "nezinat, vai izmantosit proxy, pajautâjiet tîkla administratoram vai\n"
-#~ "savam ISP."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Ja jûsu Interneta pieslçgums ir konfigurçts pareizi, jûs varat instalçt\n"
-#~ "kriptogrâfijas pakotnes. Vispirms norâdiet spoguïserveri, no kura\n"
-#~ "ielâdçt pakotnes, tad izvçlieties instalçjamâs pakotnes.\n"
-#~ "\n"
-#~ "\n"
-#~ "Atcerieties, ka spoguïserveris un kriptogrâfijas pakotnes ir jâizvçlas\n"
-#~ "atbilstoði jûsu valsts likumdoðanai."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Tagad varat norâdît laika joslu, kurâ jûs dzîvojat."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Jûs varat konfigurçt lokâlu printeri (kas pieslçgts jûsu datoram) vai\n"
-#~ "attâlu printeri (pieejami Unix, Netware vai Microsoft Windows tîklâ)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Ja jûs vçlaties izmantot printeri, izvçlieties vienu no drukas sistçmâm "
-#~ "- \n"
-#~ "CUPS vai LRP.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS ir jauna, jaudîga un elastîga drukas sistçma Unix sistçmâm (CUPS\n"
-#~ "nozîmç \"Common Unix Printing System\"). Ðî ir noklusçtâ Mandrake Linux\n"
-#~ "drukas sistçma.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR ir vecâ drukas sistçma, kas tika izmantota iepriekðçjâs Mandrake "
-#~ "Linux\n"
-#~ "versijâs.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja jums nav printera, izvçlieties \"Neviens\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux var strâdât ar daþâdiem printeru tipiem. Katram no ðiem tipiem\n"
-#~ "ir nepiecieðama atðíirîgi uzstâdîjumi.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja jûsu printeris ir fiziski pieslçgts jûsu datoram, izvçlieties "
-#~ "\"Lokâls\n"
-#~ "printeris\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja jûs vçlaties piekïût printerim, kas ir pieslçgts attâlam Microsoft\n"
-#~ "Windows datoram (vai Unix datoram, kas izmanto SMB protokolu), "
-#~ "izvçlieties\n"
-#~ "\"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Lûdzu ieslçdziet jûsu printeri, pirms turpinât un ïaut DrakX to noteikt.\n"
-#~ "\n"
-#~ "Ðeit jums ir jâievada noteikta informâcija.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printera nosaukums: drukas spolçtâjs izmanto \"lp\" kâ noklusçto "
-#~ "printera nosaukumu, tâpçc jums ir jâbût\n"
-#~ "     printerim, kas saucas \"lp\". Ja jums ir tikai viens printeris, jûs "
-#~ "varat tam pieðíirt vairâkus nosaukumus.\n"
-#~ "     Nosaukumi ir jâatdala ar vertikâlas svîtras simbolu (\"|\"). "
-#~ "Tâdçjâdi, ja jûs gribat izmantot saprotamâku\n"
-#~ "     nosaukumu, jûs to varat norâdît pirmo, piemçram, \"Mans printeris|lp"
-#~ "\". Printeris, kura nosaukumâ ir \"lp\",\n"
-#~ "     bûs noklusçtais printeris.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Apraksts: nav obligâts, bet var noderçt, ja jûsu datoram ir "
-#~ "pieslçgti vairâki printeri, vai arî jûs gribat\n"
-#~ "     atïaut citiem datoriem pieslçgties jûsu printerim.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Atraðanâs vieta: ja gribat, varat sniegt informâciju par jûsu "
-#~ "printera\n"
-#~ "     atraðanâs vietu (ðeit jûs varat rakstît visu, ko vçlaties, "
-#~ "piemçram,\n"
-#~ "     \"otrajâ stâvâ\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Ðeit jums ir jâievada noteikta informâcija.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Rindas nosaukums: drukas spolçtâjs izmanto \"lp\" kâ noklusçtâ "
-#~ "printera nosaukumu, tâpçc jums ir jâbût\n"
-#~ "     printerim, kas saucas \"lp\". Ja jums ir tikai viens printeris, jûs "
-#~ "varat tam pieðíirt vairâkus nosaukumus.\n"
-#~ "     Nosaukumi ir jâatdala ar vertikâlas svîtras simbolu (\"|\"). "
-#~ "Tâdçjâdi, ja jûs gribat izmantot saprotamâku\n"
-#~ "     nosaukumu, jûs to varat norâdît pirmo, piemçram, \"Mans printeris|lp"
-#~ "\". Printeris, kura nosaukumâ ir \"lp\",\n"
-#~ "     bûs noklusçtais printeris.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Spolçðanas katalogs: tieði ðajâ katalogâ tiek glabâti drukas "
-#~ "uzdevumi. Ja nezinat, ko ievadît,\n"
-#~ "     atstâjiet noklusçto vçrtîbu\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printera pieslçgums: Ja jûsu printeris fiziski ir pieslçgts jûsu "
-#~ "datoram, izvçlieties \"Lokâls printeris\".\n"
-#~ "     Ja jûs vçlaties piekïût printerim, kas pieslçgts attâlam Unix "
-#~ "datoram, izvçlieties \"Attâls lpd printeris\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Ja jûs vçlaties izmantot printeri, kas pieslçgts attâlam Microsoft "
-#~ "Windows datoram (vai Unix datoram, kas\n"
-#~ "     izmanto SMB protokolu), izvçlieties \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Ja jûs vçlaties izmantot printeri, kas atrodas NetWare tîklâ, "
-#~ "izvçlieties \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Jûsu printeris nav atrasts. Lûdzu ievadiet ierîces nosaukumu, kurai tas "
-#~ "ir\n"
-#~ "pieslçgts.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jûsu zinâðanai, vairums printeru ir pieslçgti pirmajam paralçlajam "
-#~ "portam.\n"
-#~ "Ðo portu GNU/Linux vidç sauc par \"/dev/lp0\" bet Microsoft Windows vidç\n"
-#~ "par \"LPT1\"."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Tagad jums ir jâizvçlâs printeri no augstâk esoðâ saraksta."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Lûdzu izvçlieties jûsu printerim atbilstoðas opcijas.\n"
-#~ "Izlasiet dokumentâciju, ja nezinat, ko izvçlçties.\n"
-#~ "\n"
-#~ "\n"
-#~ "Nâkamajâ solî jûs varçsit pârbaudît izvçlçto konfigurâciju un izmainît "
-#~ "to,\n"
-#~ "ja printeris nedarbosies pareizi."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Tagad varat ievadît jûsu Mandrake Linux sistçmas root paroli.\n"
-#~ "Parole ir jâievada divas reizes, lai pârliecinâtos, ka abas kopijas\n"
-#~ "sakrît un jûs neesat kïûdîjies.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root ir sistçmas administrators un vienîgais lietotâjs, kam ir atïauts\n"
-#~ "izmainît sistçmas konfigurâciju. Ðî iemesla dçï rûpîgi izvçlieties ðo\n"
-#~ "paroli! Neautorizçta root konta izmantoðana var bût ïoti bîstama\n"
-#~ "sistçmas integritâtei, tâs datiem un citâm tai pieslçgtajâm sistçmâm.\n"
-#~ "\n"
-#~ "\n"
-#~ "Parolei ir jâbût vismaz 8 simbolus garai burtu un ciparu kombinâcijai.\n"
-#~ "To nekad nevajadzçtu pierakstît uz papîra.\n"
-#~ "\n"
-#~ "\n"
-#~ "Neizvçlieties pârâk garu vai sareþìîtu paroli: jums to ir\n"
-#~ "jâspçj atcerçties bez pârâk lielas piepûles."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Tagad jûs varat pievienot vienu vai vairâkus \"parastu\" lietotâju\n"
-#~ "kontus kâ pretstatu \"priviliìçta\" lietotâja kontam root. Varat "
-#~ "izveidot\n"
-#~ "vienu vai vairâkus kontus katrai personai, kam bûs atïauts izmantot\n"
-#~ "jûsu datoru. Atcerieties, ka katram lietotâja kontam ir sava\n"
-#~ "konfigurâcija (grafiskâ vide, programmu konfigurâcija un tml.) un savs\n"
-#~ "\"mâjas katalogs\", kurâ ðî konfigurâcija tiek glabâta.\n"
-#~ "\n"
-#~ "\n"
-#~ "Vispirms izveidojiet kontu pats sev! Pat ja jûs bûsit vienîgais\n"
-#~ "datora lietotâjs, jûs NEDRÎKSTAT ikdienâ lietot root kontu: tas ir ïoti\n"
-#~ "liels droðîbas risks. Ïoti bieþi tikai daþi nepareizi nodrukâti burti\n"
-#~ "var padarît jûsu sistçmu nelietojamu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ðî iemesla dçï jums jâiereìistrçjas sistçmâ, izmantojot lietotâja kontu,\n"
-#~ "ko jûs tûlît izveidosit, un jâiereìistrçjas kâ root tikai "
-#~ "administrçðanas\n"
-#~ "un uzturçðanas uzdevumu veikðanai."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Ir ïoti ieteicams izveidot sâknçðanas disketi. Ja jums neizdosies "
-#~ "startçt\n"
-#~ "savu datoru, tâ bûs vienîgais veids, kâ to izglâbt bez pârinstalçðanas."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO un grub galvenâs opcijas ir:\n"
-#~ "  - Sâknçðanas ierîce: Norâda ierîces nosaukumu (t.i., cietâ diska\n"
-#~ "partîciju), uz kuras atrodas sâknçðanas sektors. Ja vien neesat\n"
-#~ "pârliecinâts par ko citu, izvçlieties \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pauze pirms noklusçtâ attçla sâknçðanas: Norâda laiku sekundes\n"
-#~ "desmitdaïâs, ko sâknçtâjs gaida pirms pirmâ attçla ielâdes.\n"
-#~ "Tas ir ieteicams sistçmâm, kas sâknçjas tieði no cietâ diska tûlît pçc\n"
-#~ "tastatûras aktivizçðanas. Sâknçðana sâkas bez pauzes, ja \"pauze\" nav\n"
-#~ "norâdîta vai ir nulle.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video reþîms: Tas norâda VGA teksta reþîmu, kas tiek izvçlçts\n"
-#~ "sâknçðanas laikâ. Ir pieejamas sekojoðas vçrtîbas: \n"
-#~ "    * normâls: izvçlas normâlu 80x25 teksta reþîmu.\n"
-#~ "    * <skaitlis>:  izmanto atbilstoðu teksta reþîmu."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO ir sâknçtâjs SPARC sistçmâm: tas spçj sâknçt GNU/Linux\n"
-#~ "vai jebkuru citu operçtâjsistçmu, kas ir uzstâdîta jûsu datorâ.\n"
-#~ "Parasti citas operçtâjsistçmas tiek korekti noteiktas un instalçtas.\n"
-#~ "Ja tâ nenotiek, jûs ðajâ ekrânâ varat ar roku pievienot ierakstu. Esiet\n"
-#~ "uzmanîgs, izvçloties pareizus parametrus.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jûs varbût arî vçlaties neïaut nevienam piekïût pârçjâm "
-#~ "operçtâjsistçmâm,\n"
-#~ "un ðajâ gadîjumâ jûs varat izdzçst attiecîgos ierakstus. Bet ðajâ\n"
-#~ "gadîjumâ jums bûs nepiecieðama sâknçðanas diskete, lai tâs sâknçtu!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO galvenâs opcijas ir:\n"
-#~ "  - Sâknçtâja instalçðana: Norâda, kur jûs vçlaties novietot "
-#~ "informâciju,\n"
-#~ "kas nepiecieðama GNU/Linux sâknçðanai. Ja vien neesat pârliecinâts\n"
-#~ "par ko citu, izvçlieties \"Diska pirmais sektors (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pauze pirms noklusçtâ attçla sâknçðanas: Norâda laiku sekundes\n"
-#~ "desmitdaïâs, ko sâknçtâjs gaida pirms pirmâ attçla ielâdes.\n"
-#~ "Tas ir ieteicams sistçmâm, kas sâknçjas tieði no cietâ diska tûlît pçc\n"
-#~ "tastatûras aktivizçðanas. Sâknçðana sâkas bez pauzes, ja \"pauze\" nav\n"
-#~ "norâdîta vai ir nulle."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Ir pienâcis laiks konfigurçt X Window System, kas ir GNU/Linux GUI\n"
-#~ "(grafiskâ lietotâja interfeisa) pamats. Lai to izdarîtu, jums ir\n"
-#~ "jâkonfigurç video karte un monitors. Tomçr vairums no ðiem soïiem ir\n"
-#~ "automatizçti, tâpçc jûsu uzdevums var bût tikai pârbaudît izdarîto\n"
-#~ "izvçli un apstiprinât parametrus :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Kad konfigurçðana ir pabeigta, tiks startçts X (ja vien jûs\n"
-#~ "nelûdzat DrakX to nedarît), lai jûs pârbaudîtu un apskatîtu, vai\n"
-#~ "parametri jûs apmierina. Ja tie neder, jûs varat atgriezties un tos\n"
-#~ "nomainît tik reizes, cik bûs nepiecieðams."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Ja ar X konfigurâciju kaut kas nav kârtîbâ, izmantojiet ðîs opcijas,\n"
-#~ "lai pareizi konfigurçtu X Window System."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Ja dodat priekðroku darba uzsâkðanai grafiskâ reþîmâ, izvçlietis \"Jâ\",\n"
-#~ "citâdi izvçlieties \"Nç\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Jûsu sistçma tiks pârstartçta.\n"
-#~ "\n"
-#~ "Pçc pârstartçðanas jûsu jaunâ Mandrake Linux sistçma tiks ielâdçta\n"
-#~ "automâtiski. Ja vçlaties sâknçt kâdu citu jau uzstâdîtu operçtâjsistçmu,\n"
-#~ "lûdzu izlasiet papildus norâdîjumus."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Èehijas (programmçtâju)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovâkijas (programmçtâju)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Veidojamâ profila nosaukums:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Ierakstît /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "Atjaunot no faila"
-
-#~ msgid "Save in file"
-#~ msgstr "Saglabât failâ"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Atjanot no disketes"
-
-#~ msgid "Format all"
-#~ msgstr "Formatçt visu"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Pçc visu partîciju formatçðanas"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "visi ðâjâs partîcijâs esoðie dati tiks pazaudçti"
-
-#~ msgid "Reload"
-#~ msgstr "Pârlâdçt"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Vai vçlaties izveidot auto instalçðanas disketi linux replikâcijai?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL konfigurâcija"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Izmantojot attâlu CUPS serveri, ðeit jums nav nepiecieðams\n"
-#~ "konfigurçt nevienu printeri. Printeri tiks atrasti automâtiski,\n"
-#~ "ja vien serveris nav pieslçgts citam tîklam; tâdâ gadîjumâ jums\n"
-#~ "ir jânorâda CUPS servera IP adrese un, iespçjams, porta numurs."
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Attâlâ rinda"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Domçna nosaukums"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Nav printera"
-
-#, fuzzy
-#~ msgid "start it"
-#~ msgstr "ierobeþot"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "Tîkla konfigurâcija"
-
-#~ msgid "Profile "
-#~ msgstr "Profils "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Savienojuma tips: "
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "Pieslçgties Internetam"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Atslçgties no Interneta"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Atslçgties no Interneta"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Atslçgties no Interneta"
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "Savienojuma nosaukums"
-
-#, fuzzy
-#~ msgid "Color configuration"
-#~ msgstr "Konfigurâcija"
-
-#, fuzzy
-#~ msgid "Connect"
-#~ msgstr "Nav pieslçgts"
-
-#, fuzzy
-#~ msgid "Disconnect"
-#~ msgstr "ISDN pieslçgums"
-
-#~ msgid "/File/_New"
-#~ msgstr "/Fails/_Jauns"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>N"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/Fails/_Atvçrt"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>O"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/Fails/_Saglabât"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/Fails/Saglabât _kâ"
-
-#~ msgid "/File/-"
-#~ msgstr "/Fails/-"
-
-#~ msgid "/_Options"
-#~ msgstr "/_Opcijas"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/Opcijas/Tests"
-
-#~ msgid "/_Help"
-#~ msgstr "/_Palîdzîba"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/Palîdzîba/_Par..."
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Noklusçts"
-
-#~ msgid "Europe"
-#~ msgstr "Eiropa"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "Noòemt rindu"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Konfigurâcijas faila saturu neizdodas saprast."
-
-#~ msgid "Adapter"
-#~ msgstr "Adapteris"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "Atslçgt"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Ieslçgt"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Tagad varat izmçìinât peli. Izmantojiet pogas un riteni, lai\n"
-#~ "pârliecinâtos, ka konfigurâcija ir pareiza. Ja nav, varat nospiest\n"
-#~ "\"Atcelt\" un izvçlçties citu draiveri."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (vai ADSL) pieslçgums"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Pele"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Jûs varat tieði norâdît URI, lai piekïûtu printerim ar CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Jâ, izdrukât ASCII izmçìinâjuma lapu"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Jâ, izdrukât PostScript izmçìinâjuma lapu"
-
-#~ msgid "Paper Size"
-#~ msgstr "Papîra izmçrs"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Vai izmest lapu pçc izdrukas?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint draivera opcijas"
-
-#~ msgid "Color depth options"
-#~ msgstr "Krâsu dziïuma opcijas"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Drukât tekstu kâ PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Vai labot teksta kâpòveida izdruku?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Lappuðu skaits vienâ izdrukas lapâ"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Labâ/Kreisâ mala punktos (1/72 collas daïâs)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Augðçjâ/Apakðçjâ mala punktos (1/72 collas daïâs)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Papildus GhostScript opcijas"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Papildus teksta opcijas"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Aègârna lappuðu secîba"
-
-#~ msgid "CUPS starting"
-#~ msgstr "CUPS startçðana"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Izvçlieties attâla printera pieslçgumu"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Katram printerim ir nepiecieðams nosaukums (piemçram, lp).\n"
-#~ "Var norâdît arî citus parametrus, piemçram, printera aprakstu vai tâ\n"
-#~ "atraðanâs vietu. Kâdu nosaukumu pieðíirt ðim printerim, un kâdâ veidâ\n"
-#~ "printeris ir pieslçgts?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Katrai drukas rindai (uz kuru tiek adresçti drukas uzdevumi) ir "
-#~ "nepiecieðams\n"
-#~ "nosaukums (bieþi lp) un tai piesaistîts spolçðanas katalogs. Kâdu "
-#~ "nosaukumu\n"
-#~ "un katalogu izmantot ðai rindai un kâ ir pieslçgts printeris?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Rindas nosaukums"
-
-#~ msgid "Spool directory"
-#~ msgstr "Spolçðanas katalogs"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Lai palielinâtu sistçmas droðîbu, izvçlieties \"Izmantot shadow failu\"\n"
-#~ "un \"Izmantot MD5 paroles\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Ja jûsu tîklâ lieto NIS, izvçlieties \"Izmantot NIS\". Ja jûs to nezinat\n"
-#~ "pajautâjiet savam tîkla administratoram."
-
-#~ msgid "yellow pages"
-#~ msgstr "dzeltenâs lapas"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "LAN konfigurâcija"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Pakalpojumu sniedzçja dns 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Pakalpojumu sniedzçja dns 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Kâ jûs vçlaties pieslçgties Internetam?"
-
-#, fuzzy
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "LAN konfigurâcija"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Izvçlieties failu"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Izmçìinu pieslçgumu..."
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "Konfigurçju..."
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Ðis startçðanas skripts mçìina ielâdçt moduïus jûsu usb pelei."
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Sâknçðanas stila konfigurçðana"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Tagad, kad ir konfigurçts jûsu Interneta pieslçgums,\n"
-#~ "datoru var konfigurçt tâ, lai kopîgi izmantotu Interneta pieslçgumu.\n"
-#~ "Piezîme: jums ir nepiecieðams atseviðís tîkla adapteris, lai uzstâdîti "
-#~ "lokâlo datortîklu (LAN).\n"
-#~ "\n"
-#~ "Vai vçlaties uzstâdît Interneta pieslçguma koplietoðanu?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Automâtiskas atkarîbas"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "LILO/GRUB konfigurçðana"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Sâknçðanas disketes radîðana"
-
-#~ msgid "Format floppy"
-#~ msgstr "Disketes formatçðana"
-
-#~ msgid "Choice"
-#~ msgstr "Izvçle"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "horizontâla jauka izskata aurora"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "vertikâla tradicionâla aurora"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitors"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Tagad varat izvçlçties daþâdas sistçmas opcijas.\n"
-#~ "\n"
-#~ "* Izmantot cietâ diska optimizâcijas: ðî opcija var uzlabot cietâ diska   "
-#~ "veiktspçju, taèu tâ ir paredzçta tikai pieredzçjuðiem lietotâjiem:\n"
-#~ "  daþas kïûdainas mikroshçmas var iznîcinât jûsu datus, tâpçc jûs esat   "
-#~ "brîdinâts. Atcerieties, ka kodolâ ir iebûvçts disku un mikroshçmu\n"
-#~ "  melnais saraksts, tomçr, ja vçlaties iztikt bez nepatîkamiem\n"
-#~ "  pârsteigumiem, neizvçlieties ðo opciju.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Izvçlieties droðîbas lîmeni: jûs varat izvçlçties sistçmas droðîbas\n"
-#~ "  lîmeni. Pilnîgu informâciju meklçjiet rokasgrâmatâ. Parasti, ja\n"
-#~ "  nezinat, atstâjiet noklusçto vçrtîbu.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precîzs RAM apjoms, ja nepiecieðams: diemþçl mûsdienu datoru\n"
-#~ "  pasaulç nav vienotas metodes, kâ pajautât BIOSam par jûsu datorâ\n"
-#~ "  uzstâdîtâs atmiòas apjomu. Rezultâtâ Linux ne vienmçr pareizi\n"
-#~ "  nosaka jûsu datora RAM apjomu. Ja tâ notiek, jûs ðeit varat\n"
-#~ "  norâdît pareizu RAM apjomu. Òemiet vçrâ, ka 2 vai 4 MB atðíirîba\n"
-#~ "  ir normâla.\n"
-#~ "\n"
-#~ "* Nomainâmu datu nesçju automontçðana: ja nevçlaties katru reizi montçt\n"
-#~ "  nomainâmus datu nesçjus (CD-ROM, disketi, Zip u.c.), drukâjot \"mount"
-#~ "\"   un \"umount\", izvçlieties ðo opciju.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Iztîrît \"/tmp\" katras sâknçðanas laikâ: ja jûs vçlaties sistçmas   "
-#~ "sâknçðanas laikâ izdzçst visus failus un\n"
-#~ "  katalogus, kas atrodas \"/tmp\", izvçlieties ðo opciju.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Ieslçgt NumLock palaiðanas laikâ: ja vçlaties, lai pçc sâknçðanas   "
-#~ "bûtu ieslçgts NumLock, izvçlieties ðo\n"
-#~ "  opciju. Òemiet vçrâ, ka to nevajadzçtu izvçlçties klçpjdatoriem, un "
-#~ "ka   NumLock var strâdât vai nestrâdât X vidç."
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "Atvainojiet, pasta konfigurçðana vçl nav realizçta. Esiet pacietîgi."
-
-#
-#~ msgid "Internet/Network access"
-#~ msgstr "Internets/Pieeja tîklam"
-
-#, fuzzy
-#~ msgid "Firewall Configuration Wizard"
-#~ msgstr "Tîkla konfigurçðanas meistars"
-
-#, fuzzy
-#~ msgid "Miscellaneous"
-#~ msgstr "Daþâdi jautâjumi"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Daþâdi jautâjumi"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Nevar izmantot supermount augstâ droðîbas lîmenî"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "òemiet vçrâ: PIE ÐÎ DROÐÎBAS LÎMEÒA ROOT SESIJAS ATVÇRÐANA NO KONSOLES\n"
-#~ "NAV ATÏAUTA! Ja vçlaties bût root, jums vispirms ir jâatver parasta\n"
-#~ "lietotâja sesija un tad jâizmanto \"su\". Vispârîgi runâjot, neceriet\n"
-#~ "izmantot savu datoru kam citam kâ vien servera uzdevumiem.\n"
-#~ "Jûs esat brîdinâts."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Esiet uzmanîgs, numlock ieslçgðana liek daudziem taustiòiem parasto\n"
-#~ "burtu vietâ râdît ciparus (piemçram, `p' nospieðana dod `6')"
-
-#~ msgid "not connected"
-#~ msgstr "nav pieslçgts"
-
-#, fuzzy
-#~ msgid "Actions"
-#~ msgstr "Atraðanâs vieta"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Zinâtniskâs programmas"
-
-#
-#~ msgid "toot"
-#~ msgstr "toot"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Serveris, Failu/Drukas/Samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Serveris, DNS/DHCP"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Pirmais DNS serveris"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Otrais DNS serveris"
-
-#~ msgid "using module"
-#~ msgstr "izmantojot moduli"
-
-#
-#~ msgid "Development, Database"
-#~ msgstr "Izstrâde, Datubâze"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Izstrâde, Integrçtâ vide"
-
-#
-#~ msgid "Development, Standard tools"
-#~ msgstr "Izstrâde, Standartrîki"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Kuru(s) sâknçtâju(s) vçlaties izmantot?"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
diff --git a/perl-install/share/po/nl.po b/perl-install/share/po/nl.po
deleted file mode 100644
index 96e38fb15..000000000
--- a/perl-install/share/po/nl.po
+++ /dev/null
@@ -1,9668 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999-2000 Mandrakesoft
-# Jo <rainbow@linuxfan.com>, 1999
-# Tom Laermans <sidewinder@linuxfreak.com>, 2000
-# Niels Gras <niels.gras@wanadoo.nl>, 2000
-# Reinout van Schouwen <reinout@cs.vu.nl>, 2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 1999-08-25 11:07+0200\n"
-"Last-Translator: Reinout van Schouwen <reinout@cs.vu.nl>\n"
-"Language-Team: Dutch\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Configureer alle koppen afzonderlijk"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Gebruik Xinerama-uitbreiding"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configureer alleen kaart \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Multi-koppen configuratie"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Uw systeem ondersteunt een configuratie met meerdere koppen.\n"
-"Want wenst u te doen?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Grafische kaart"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Selecteer een grafische kaart"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Selecteer een X-server"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X-Server"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Welke configuratie van XFree wilt u hebben?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Uw kaart kan 3D acceleratie ondersteuning krijgen, maar alleen met XFree %"
-"s.\n"
-"Uw kaart wordt ondersteund door XFree %s, welke betere ondersteuning zou \n"
-"kunnen hebben in 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Uw kaart kan 3D acceleratie ondersteuning krijgen met XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s met 3D hardware acceleratie"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Uw kaart kan 3D acceleratie ondersteuning krijgen met XFree %s.\n"
-"LET OP: DIT IS EEN EXPERIMENTELE ONDERSTEUNING, WELKE UW COMPUTER KAN "
-"LATEN \n"
-"VASTLOPEN."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s met EXPERIMENTELE 3D hardware acceleratie"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Uw kaart kan 3D hardware acceleratie ondersteuning hebben, maar alleen met \n"
-"XFree %s, LET OP: DIT IS EEN EXPERIMENTELE ONDERSTEUNING, WELKE UW "
-"COMPUTER \n"
-"KAN LATEN VASTLOPEN.\n"
-"Uw kaart wordt ondersteund door XFree %s, welke betere ondersteuning zou \n"
-"kunnen hebben in 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installatie beeldscherm-stuurprogramma"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree configuratie"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Selecteer de geheugengrootte van uw grafische kaart"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Selecteer de opties voor de X-server"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Selecteer een monitor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"De twee cruciale parameters zijn de verticale verversingsratio, d.w.z.\n"
-"de snelheid waarmee het volledige scherm wordt ververst en nog "
-"belangrijker \n"
-"de horizontale sync ratio, dit is de snelheid waaraan de scanlijnen worden\n"
-"geschreven\n"
-"\n"
-"Het is UITERMATE BELANGRIJK dat u geen monitor type opgeeft die een sync "
-"bereik\n"
-"heeft die de mogelijkheden van uw monitor overschrijdt: u kan uw monitor\n"
-"beschadigen.\n"
-"Bij twijfel maakt u best een voorzichtige keuze."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Horizontale verversingsratio"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Verticale verversingsratio"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Monitor niet geconfigureerd"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Grafische kaart nog niet geconfigureerd"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Resoluties nog niet gekozen"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Wenst u de configuraties te testen?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Waarschuwing: door deze grafische kaart te testen, kan uw computer vastlopen"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Configuratie Testen"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"probeer enkele parameters aan te passen"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Er is een fout opgetreden:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Verdwijnt binnen %d seconden"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Is dit de juiste instelling?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Er is een fout opgetreden, probeer een aantal parameters aan te passen"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Resolutie"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Kies resolutie en kleurdiepte"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafische kaart: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86-server: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Expert modus"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Toon alles"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Resoluties"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Toetsenbord instelling: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Muistype: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Muis: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor Horizontale Sync: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor verticale verversing: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafische kaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identificatie grafische kaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Videogeheugen: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kleurdiepte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolutie: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86-server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 stuurprogramma: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Bezig met het voorbereiden van de X-Window configuratie"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Wat wenst u te doen?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Verander Monitor"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Verander grafische kaart"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Verander Server-opties"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Resolutie wijzigen"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Informatie tonen"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Opnieuw testen"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Beëindig"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Veranderingen bewaren?\n"
-"De huidige configuratie is:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Gelieve opnieuw in te loggen op %s om de wijzigingen te activeren"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Gelieve uit te loggen en daarna Ctrl-Alt-Backspace te gebruiken"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X bij opstarten"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ik kan uw computer instellen om automatisch X te starten bij opstarten.\n"
-"Wenst u X te starten bij het opstarten?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 kleuren (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32.000 kleuren (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65.000 kleuren (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljoen kleuren (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljard kleuren (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB of meer"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standaard VGA, 640x480 aan 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 aan 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Compatibel, 1024x768 aan 87 Hz interlaced (geen 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 aan 87 Hz interlaced, 800x600 aan 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 aan 60 Hz, 640x480 aan 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 aan 60 Hz, 800x600 aan 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 aan 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency in staat om 1280x1024 aan 60 Hz weer te geven"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency in staat om 1280x1024 aan 74 Hz weer te geven"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency in staat om 1280x1024 aan 76 Hz weer te geven"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Multi-frequency in staat om 1600x1200 aan 70 Hz weer te geven"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Multi-frequency in staat om 1600x1200 aan 76 Hz weer te geven"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Eerste sector van boot-partitie"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Eerste sector van station (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILO Installatie"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Waar wenst u de bootloader te installeren?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "LILO/grub-installatie"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO met tekst-menu"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO met grafisch menu"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Opstarten vanuit DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Bootloader algemene opties"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Welke bootloader te gebruiken"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Bootloader installatie"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Boot-apparaat"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (werkt niet met oude BIOS'en)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Compact"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "compact"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Video-modus"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Pauze voor het opstarten van standaard-beeld"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Wachtwoord"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Wachtwoord (nogmaals)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Commandoregel-opties beperken"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "beperken"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Elke keer bij opstarten /tmp legen"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Juiste RAM-grootte (indien nodig) (%d MB gevonden)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Meerdere profielen inschakelen"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Geef de RAM-grootte in MB"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"De optie ``Commandoregel-opties beperken'' heeft geen nut zonder wachtwoord"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Gelieve opnieuw te proberen"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "De wachtwoorden kloppen niet met elkaar"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Initialisatie-bericht"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Kernel opstart-wachttijd"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Opstarten van CD mogelijk maken?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Opstarten van OF mogelijk maken?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Standaard besturingssysteem?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hier zijn de ingangen voor LILO.\n"
-"U kunt er enkele toevoegen of de bestaande wijzigen."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Toevoegen"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Klaar"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Aanpassen"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Welk type ingang wenst u toe te voegen?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Ander OS (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Ander OS (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Ander OS (Windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Beeld"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Achteraan toevoegen"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Lezen/schrijven"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Onveilig"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Naam"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Standaard"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-grootte"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "Geen Video"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Ingang verwijderen"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Lege naam is niet toegelaten"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Deze naam wordt al gebruikt"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s interfaces gevonden"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Heeft u er nog één?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Heeft u een %s interface?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Nee"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Zie hardware-info"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Bezig met installeren van stuurprogramma voor %s kaart %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Welk %s stuurprogramma moet ik proberen?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"In sommige gevallen heeft het stuurprogramma van %s extra informatie nodig\n"
-"om juist te werken, alhoewel het meestal ook zonder goed werkt. Wil u\n"
-"extra opties invoeren of laat u liever het stuurprogramma zijn informatie\n"
-"zelf zoeken? Soms zal de automatische detectie de computer laten hangen,\n"
-"maar het zou geen schade mogen veroorzaken."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Automatisch Detecteren"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Geef opties"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "U mag nu de opties ingeven voor module %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"U mag nu de opties voor module %s ingeven.\n"
-"Opties staan in het formaat ``naam=waarde naam2=waarde2 ...''.\n"
-"Bijvoorbeeld, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Module-opties:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Het laden van module %s is niet gelukt.\n"
-"Wenst u opnieuw te proberen met andere parameters?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s reeds toegevoegd)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Dit wachtwoord is te eenvoudig"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Gelieve een gebruikersnaam in te geven"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"De gebruikersnaam mag slechts kleine letters, cijfers, `-' en`_' bevatten"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Deze gebruikersnaam werd reeds toegevoegd"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Gebruiker toevoegen"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Geef een gebruiker in\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Gebruiker aanvaarden"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Echte naam"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Gebruikersnaam"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Pictogram"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Automatisch inloggen"
-
-#: ../../any.pm_.c:757
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ik kan uw computer instellen om automatisch bij een bepaalde gebruiker in te "
-"loggen.\n"
-"Wilt u van deze mogelijkheid gebruik maken?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Kies de standaard gebruiker:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Selecteer de 'window manager' die u wilt gebruiken:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Gelieve een taal te kiezen."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "U kunt andere talen kiezen die beschikbaar zullen zijn na installatie"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Alles"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Welkom bij %s - Kies uw besturingssysteem!\n"
-"\n"
-"Kies een ingang uit de bovenstaande lijst\n"
-"of wacht %d seconden voor de standaard-opstartkeuze.\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welkom bij GRUB - Kies uw besturingssysteem!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Gebruik de %c en %c-toetsen om te aangeduide ingang te selecteren."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Druk Enter om het geselecteerde besturingssysteem te booten, druk 'e'"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr " om de ingang eerst te bewerken, of 'c' voor een command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-"De aangeduide ingang zal automatisch gestart worden binnen %d seconden."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "niet genoeg ruimte in /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:972
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "U kunt de opstart-lader niet installeren op een %s-partitie\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "Helaas geen hulp beschikbaar.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuratie van opstart-stijl"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Bestand:"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Bestand/_Beëindig"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Nieuwe stijl (in categorieën)"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Nieuwe stijl"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Traditionele stijl"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Traditionele stijl (Gtk+)"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Aurora gebruiken bij opstarten"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Lilo/Grub modus"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"U gebruikt op dit moment %s als Opstart-manager.\n"
-"Klik op Configureer om de instel-'wizard' te starten."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Configureren"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Opstartvorm"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Systeemvorm"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Open het X-Window systeem bij opstarten"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Nee, ik wil niet automatisch inloggen"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, ik wil automatisch inloggen met deze (gebruiker, werkomgeving)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Annuleren"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "kan /etc/inittab niet openen: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr ""
-"De installatie van LILO is niet gelukt. De volgende fout werd gevonden:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuten"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minuut"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d seconden"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Gelieve eerst een veiligheidskopie van uw gegevens te maken"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Lees aandachtig!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Als u aboot wenst te gebruiken, wees dan voorzichtig en laat vrije ruimte "
-"(2048 sectoren is genoeg)\n"
-"aan het begin van de schijf"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Fout"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Wizard"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Nieuw"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "Op afstand"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Koppelpunt"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Opties"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Type"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Ontkoppelen"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Koppelen"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Kies een actie"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"U heeft één grote FAT-partitie\n"
-"(meestal gebruikt door Microsoft DOS/Windows).\n"
-"Ik stel voor dat u eerst de grootte van die partitie aanpast\n"
-"(klik erop, en klik daarna op \"Grootte Aanpassen\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Gelieve op een nieuwe partitie te klikken"
-
-#: ../../diskdrake.pm_.c:240
-msgid "Please click on a media"
-msgstr "Gelieve op een media-soort te klikken"
-
-#: ../../diskdrake.pm_.c:243
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr ""
-"Gelieve op een knop hierboven te klikken\n"
-"U kunt ook \"Nieuw\" gebruiken."
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr "Gebruik \"Nieuw\""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Details"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Virtueel geheugen"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Leeg"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Ander type"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Bestandssysteem types:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Creëer"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Gebruik ``%s'' in de plaats"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Verwijderen"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Gebruik eerst ``Ontkoppelen''"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Na het veranderen van het type van partitie %s, zullen alle gegevens op deze "
-"partitie verloren gaan"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Waaraan wenst u dit apparaat %s te koppelen?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "Koppel-opties:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "Diversen"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "Verwisselbare media"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "Verander partitietype"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Welk bestandssysteem wenst u?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "Gedeelde NFS-bronnen aan het opzoeken"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "Gedeelde NFS-bronnen van server %s aan het opzoeken"
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-"Als de gewenste ingang niet in de lijst hierboven voorkomt, voer hem dan "
-"hier in:"
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Server"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "Gedeelde bron"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "Gedeelde samba-bronnen aan het opzoeken"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "Gedeelde samba-bronnen van server %s aan het opzoeken"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "Kies een partitie"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Kies een andere partitie"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Afsluiten"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Schakel naar expert-modus"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Schakel naar normale modus"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Ongedaan maken"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Toch doorgaan?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Beëindig zonder opslaan"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Beëindigen zonder de partitietabel weg te schrijven?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Wilt u de /etc/fstab aanpassingen bewaren"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Automatisch toewijzen"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Opnieuw beginnen"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Meer"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "Informatie over harde schijf"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Niet genoeg vrije ruimte voor automatische toewijzing"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Alle primaire partities zijn al toegewezen"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Ik kan geen partitie meer toevoegen"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Om meer partities te kunnen maken, zal u er een moeten verwijderen. Dan kan\n"
-"er een uitgebreide (extended) partitie worden bijgemaakt"
-
-#: ../../diskdrake_interactive.pm_.c:285
-msgid "Save partition table"
-msgstr "Partitietabel schrijven"
-
-#: ../../diskdrake_interactive.pm_.c:286
-msgid "Restore partition table"
-msgstr "Partitietabel terughalen"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Partitietabel redden"
-
-#: ../../diskdrake_interactive.pm_.c:289
-msgid "Reload partition table"
-msgstr "Partitietabel opnieuw laden"
-
-#: ../../diskdrake_interactive.pm_.c:293
-msgid "Removable media automounting"
-msgstr "Automatische koppeling van verwisselbare media"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Selecteer bestand"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"De backup partitietabel heeft niet dezelfde grootte\n"
-"Toch verdergaan?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Waarschuwing"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Plaats een floppy in het station.\n"
-"Alle gegevens op deze floppy zullen verloren gaan"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Proberen om partitietabel te redden"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "Gedetailleerde informatie"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Grootte aanpassen"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Verplaatsen"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formatteren"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Actief"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Toevoegen aan RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Toevoegen aan LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Verwijderen uit RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Verwijderen uit LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "RAID aanpassen"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Voor Loopback gebruiken"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Nieuwe partitie creëren"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Start-sector: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Grootte in MB: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Bestandssysteem-type: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Koppelpunt: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Voorkeur: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-msgid "Remove the loopback file?"
-msgstr "Het loopback-bestand verwijderen?"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Verander partitietype"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "Bezig met omschakelen van ext2 naar ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Waar wenst u dit loopback-apparaat %s aan te koppelen?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kan een koppelpunt niet verzetten omdat deze partitie gebruikt wordt als\n"
-"loopback. Verwijder de loopback eerst."
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Bezig met berekenen van FAT bestandssysteemgrenzen"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Bezig met de grootte aan te passen"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Deze partitie is niet in grootte aanpasbaar"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"Er zou een reservekopie moeten gemaakt worden van alle gegevens op deze "
-"partitie."
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Na het veranderen van de grootte van partitie %s, zullen alle gegevens op "
-"deze partitie verloren gaan"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Kies de nieuwe grootte"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "Nieuwe grootte in MB: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Naar welke schijf wenst u het te verplaatsen?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Naar welke sector wenst u het te verplaatsen?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Aan het verplaatsen"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Partitie aan het verplaatsen..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Kies een bestaande RAID om aan toe te voegen"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "nieuw"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Kies een bestaande LVM om aan toe te voegen"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "Naam van LVM?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Deze partitie kan niet gebruikt worden voor loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Loopback-bestandsnaam: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-msgid "Give a file name"
-msgstr "Voer een bestandsnaam in"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Loopback-bestand is al in gebruik, gelieve een ander te kiezen"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Het bestand bestaat al. Wenst u het te gebruiken?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "apparaat"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "niveau"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "chunk-grootte"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Voorzichtig: deze operatie is gevaarlijk."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Welk type partitionering?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Sorry, het is zinloos om /boot zo ver achteraan de schijf te plaatsen (op "
-"een\n"
-"cylinder > 1024).\n"
-"Ofwel gebruikt u LILO en zal het niet werken, of u gebruikt LILO niet en u "
-"heeft\n"
-"/boot niet nodig."
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"De partitie die u selecteerde als rootpartitie (/) bevindt zich fysiek "
-"voorbij\n"
-"de 1024e cylinder van de harde schijf en u heeft geen /boot partitie.\n"
-"Indien u de LILO boot manager wenst te gebruiken, zorg er dan voor dat u "
-"een\n"
-"/boot partitie toevoegt aan het begin van de schijf"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"U heeft een software RAID partitie als root (/) geselecteerd.\n"
-"Geen bootloader kan dit aan zonder een /boot partitie, dus wees er zeker\n"
-"van ook een /boot-partitie toe te voegen."
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partitietabel van schijf %s wordt weggeschreven!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "U zal moeten herstarten voordat de aanpassing van kracht wordt"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Na het formatteren van partitie %s, zullen alle gegevens op deze partitie "
-"verloren zijn"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Bezig met formatteren"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Bezig met formatteren van loopback-bestand %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Bezig met formatteren van partitie %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Hide files"
-msgstr "Bestanden verbergen"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Move files to the new partition"
-msgstr "Bestanden naar de nieuwe partitie verplaatsen"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-msgid "Moving files to the new partition"
-msgstr "Bezig met verplaatsen van bestanden naar de nieuwe partitie"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr "Bezig met kopiëren van %s"
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, c-format
-msgid "Removing %s"
-msgstr "Bezig met verwijderen van %s"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Apparaat: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS schijfletter: %s (dit is slechts een gok)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Type: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Naam: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Start: sector %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Grootte: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectoren"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Cylinder %d tot cylinder %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Geformatteerd\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Niet geformatteerd\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Gekoppeld\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback-bestand(en):   %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Standaard te starten partitie\n"
-"    (om MS-DOS te booten, niet voor lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Niveau %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Chunk-grootte %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-schijven %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback bestandsnaam: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"De kans is aanwezig dat deze\n"
-"partitie een Driver partitie is, u\n"
-"kunt hem waarschijnlijk beter met\n"
-"rust laten.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Deze speciale Bootstrap\n"
-"partitie is voor het\n"
-"duaal-opstarten van uw systeem.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Grootte: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Indeling: %s cylinders, %s koppen, %s sectoren\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-schijven %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitietabel-type: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "op bus %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Opties: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatteren van %s mislukt"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ik weet niet hoe %s in type %s te formatteren"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "koppelen mislukt"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck is mislukt met afsluitcode %d of signaal %d"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "koppelen mislukt: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fout bij ontkoppelen %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "eenvoudig"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "U kan JFS niet gebruiken op een partitie kleiner dan 16MB"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "U kan ReiserFS niet gebruiken op een partitie kleiner dan 32MB"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Koppelpunten moeten beginnen met een /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Er is al een partitie met als koppelpunt %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "U kunt geen LVM logisch deel voor koppelpunt %s gebruiken"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Deze map zou binnen het root bestandssysteem moeten blijven"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"U benodigt een geavanceerd bestandssysteem (ext2, reiserfs) voor dit "
-"koppelpunt\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fout bij het openen van %s voor schrijfbewerking: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Er is een fout opgetreden - er werden geen geldige apparaten gevonden "
-"waarop\n"
-"nieuwe bestandssystemen konden worden gecreëerd. Gelieve uw hardware na te\n"
-"kijken voor de oorzaak van dit probleem."
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "U heeft helemaal geen partities!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux is een multi-gebruikerssysteem, dit betekent dat iedere "
-"gebruiker \n"
-"haar eigen voorkeuren, bestanden enzovoort kan hebben. U kunt de \n"
-"''Gebruikershandleiding'' lezen om hierover meer te weten te komen. Maar \n"
-"in tegenstelling tot \"root\", de \"administrator\", zullen de gebruikers "
-"die\n"
-" u hier toevoegt geen recht hebben om iets te veranderen behalve hun eigen \n"
-"bestanden en hun eigen configuratie. U zult tenminste één gebruiker voor \n"
-"uzelf aan moeten maken. Deze account is degene waar u voor dagelijks "
-"gebruik \n"
-"op zult inloggen. Alhoewel het erg praktisch is om iedere dag als \"root\" \n"
-"in te loggen, kan het ook erg gevaarlijk zijn! De kleinste vergissing kan \n"
-"ervoor zorgen dat uw hele systeem niet meer werkt. Wanneer u een \n"
-"grote vergissing maakt als een reguliere gebruiker, zou u sommige gegevens \n"
-"kunnen verliezen, maar niet het hele systeem.\n"
-"\n"
-"Eerst voert u uw echte naam in. Dit is uiteraard niet verplicht - u kunt \n"
-"alles invoeren wat u wilt. DrakX neemt dan het eerste woord dat u in het "
-"veld \n"
-"hebt ingevuld en brengt het over naar het veld \"Gebruikersnaam\". Dit is "
-"de \n"
-"naam die deze afzonderlijke gebruiker krijgt om in te loggen op het "
-"systeem. \n"
-"U kunt het veranderen. Dan zal u hier een wachtwoord moeten invoeren. Het \n"
-"wachtwoord van een (reguliere) gebruiker zonder privileges is niet zo \n"
-"cruciaal als dat van de \"root\"-gebruiker vanuit veiligheidsperspectief, \n"
-"maar dat is geen reden om het te verwaarlozen- tenslotte staan uw "
-"bestanden \n"
-"op het spel.\n"
-"\n"
-"Wanneer u klikt op \"Gebruiker aaanvaarden\", dan kunt u daarna zoveel \n"
-"gebruikers toevoegen als u wilt. Voeg een gebruiker toe voor elk van uw \n"
-"vrienden, uw vader of uw zus bijvoorbeeld. Als u klaar bent met het \n"
-"toevoegen van alle gebruikers die u wenst, selecteer dan \"Klaar\".\n"
-"\n"
-"Klikken op de \"Geavanceerd\"-knop stelt u in staat om de standaard \"shell"
-"\"\n"
-"voor een gebruiker te veranderen (standaard is dit bash)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"De Mandrake Linux installatie is verdeeld over meerdere CDROMs. DrakX \n"
-"weet of een geselecteerd pakket te vinden is op een andere CDROM en zal\n"
-"de huidige CD uitwerpen en u vragen om een andere in te leggen wanneer\n"
-"dat nodig is."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"U kan nu kiezen welke diensten u wil gestart hebben bij het opstarten.\n"
-"\n"
-"In dit overzicht staan alle diensten die beschikbaar zijn in de huidige\n"
-"installatie. Kijk ze aandachtig na en de-selecteer degenen die niet altijd\n"
-"nodig zijn bij het opstarten.\n"
-"\n"
-"U kunt een korte uitleg krijgen over een dienst door een specifieke dienst\n"
-"te selecteren. Wanneer u niet zeker bent of een dienst nuttig is of niet,\n"
-"dan is het veiliger om de standaard-instelling over te nemen.\n"
-"\n"
-"Wees vooral voorzichtig in deze stap als u uw machine als een server wil\n"
-"gebruiken: u zal waarschijnlijk de diensten die u niet nodig heeft niet "
-"willen\n"
-"starten. Onthoud alstublieft dat een aantal diensten gevaarlijk kunnen zijn\n"
-"wanneer ze geactiveerd zijn op een server. In het algemeen geldt: kies\n"
-"alleen de services die u echt nodig heeft."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux beheert de tijd in GMT of \"Greenwich Mean Time\" en vertaalt deze "
-"dan\n"
-"in regionale tijd, afhankelijk van de tijdszone die u geselecteerd hebt."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Uw nieuwe Mandrake Linux besturingssysteem wordt nu geïnstalleerd.\n"
-"Afhankelijk van het aantal pakketten dat u zult installeren en de snelheid\n"
-"van uw computer, kan deze operatie enkele minuten tot een behoorlijk lange\n"
-"tijd in beslag nemen.\n"
-"\n"
-"Even geduld alstublieft."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Even geduld a.u.b. Deze operatie kan enkele minuten duren."
-
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"DrakX moet nu weten of u een standaard (\"Aanbevolen\") installatie wilt\n"
-"uitvoeren, of meer controle wilt kunnen uitoefenen (\"Expert\"). U heeft "
-"ook\n"
-"de keus tussen het uitvoeren van een nieuwe installatie en het opwaarderen\n"
-"van een reeds aanwezig Mandrake Linux systeem. Klikken op \"Installeren\"\n"
-"zal een vorig Mandrake Linux-systeem volledig uitwissen.\n"
-"\n"
-"Kies \"Installeren\" als er geen vorige versies van Mandrake Linux "
-"geïnstalleerd\n"
-"zijn, of als u tussen meerdere besturingssystemen wilt kunnen kiezen bij.\n"
-"het opstarten.\n"
-"\n"
-"Kies \"Opwaarderen\" (Upgrade) als u een vorige versie van Mandrake "
-"Linuxwenst te vernieuwen of repareren.\n"
-"\n"
-"Kies, afhankelijk van uw kennis van GNU/Linux, één van de volgende\n"
-"mogelijkheden om uw Mandrake Linux besturingssysteem te installeren\n"
-"of op te waarderen:\n"
-"\n"
-" * Aanbevolen: kies dit als u nog nooit een GNU/Linux besturingssysteem "
-"hebt\n"
-"geïnstalleerd. De installatie zal erg gemakkelijk verlopen en er zullen u\n"
-"slechts enkele vragen gesteld worden.\n"
-"\n"
-" * Expert: als u een goede kennis bezit van GNU/Linux kunt u deze\n"
-"installatieklasse kiezen. De expert-installatie staat u toe een in hoge "
-"mate\n"
-"aangepaste installatie uit te voeren. Het beantwoorden van sommige vragen\n"
-"kan moeilijk zijn als u geen goede kennis van GNU/Linux bezit, dus kies dit\n"
-"niet tenzij u weet wat u doet."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Gelieve de juiste poort te kiezen. COM1 onder MS Windows wordt bijvoorbeeld\n"
-"ttyS0 genoemd onder GNU/Linux."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (de LInux LOader) en GRUB zijn opstart-laders: ze kunnen Linux of\n"
-"eender welk ander besturingssysteem opstarten op uw computer.\n"
-"Normaal gesproken worden deze besturingssystemen correct gedetecteerd en\n"
-"geïnstalleerd. Als dit niet het geval is, kunt u handmatig een ingang "
-"toevoegen\n"
-"op dit scherm. Let goed op dat u de juiste opties kiest.\n"
-"\n"
-"U wil ook misschien niet iedereen toegang geven tot die besturingssystemen,\n"
-"dan kan u de overeenkomstige ingangen verwijderen. Maar, in dit geval,\n"
-"zal u wel een bootdisk nodig hebben om ze nog te kunnen opstarten!"
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Hier moet u ingeven waar u de informatie wenst te\n"
-"plaatsen die nodig is om GNU/Linux op te starten.\n"
-"\n"
-"\n"
-"Tenzij u precies weet wat u doet, kiest u \"Eerste sector van\n"
-"station (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Kies de harde schijf die u wilt wissen om uw nieuwe\n"
-"Mandrake Linux partitie op te installeren. Wees voorzichtig, alle data die\n"
-"op deze schijf staat zal verloren gaan, en niet terug te halen zijn!"
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klik op \"OK\" wanneer u alle gegevens en partities die aanwezig zijn \n"
-"op deze harde schijf wilt wissen. Wees voorzichtig, want na het klikken \n"
-"op \"OK\" zult u niet in staat zijn om wat voor op schijf aanwezige "
-"gegevens \n"
-"of partities dan ook terug te halen, met inbegrip van alle Windows-"
-"gegevens.\n"
-"\n"
-"Klik op \"Annuleren\" om deze operatie te annuleren zonder daarbij \n"
-"gegevens of partities aanwezig op schijf te verliezen."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-"Kan de kernel-modules behorend bij uw kernel niet benaderen (bestand %s \n"
-"is afwezig)"
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kan niet uitzenden zonder NIS-domein"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr ""
-"Plaats een met het FAT-bestandssysteem geformatteerde diskette in station %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Deze diskette is niet FAT-geformatteerd"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Om deze opgeslagen pakketselectie te gebruiken, start u de installatie \n"
-"met ''linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fout bij het lezen van bestand %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Sommige hardware op uw computer heeft ''fabrikantsgebonden'' drivers \n"
-"nodig om te kunnen functioneren. U kunt informatie hierover vinden op: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"U moet een root-partitie hebben.\n"
-"Hiervoor dient u een partitie aan te maken (of op een bestaande partitie "
-"teklikken). Daarna kiest u de actie ``Koppelpunt'' en stelt u dit i nop `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "U moet een swap-partitie hebben"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"U heeft geen swap-partitie!\n"
-"\n"
-"Toch verdergaan?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr ""
-"U moet een partitie met FAT-bestandssysteem gekoppeld hebben aan /boot/efi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Gebruik vrije ruimte"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Niet genoeg vrije ruimte om nieuwe partities te maken"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Gebruik een bestaande partitie"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Er is geen bestaande partitie om te gebruiken"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Gebruik de Windows partitie voor loopback "
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Welke partitie wenst u te gebruiken voor Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Kies de grootte"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Root-partitie-grootte in MB:"
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Swap-partitie-grootte in MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Gebruik de vrije ruimte op de Windows partitie"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Van welke partitie wilt u de grootte veranderen?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Bezig met berekenen van Windows bestandssysteemgrenzen"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"De FAT grootte-aanpasser was niet instaat met uw partitie om te gaan, \n"
-"dit is fout gegaan: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Uw Windows partitie is te gefragmenteerd, start a.u.b. eerst ``defrag'' eerst"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"WAARSCHUWING!\n"
-"\n"
-"DrakX moet nu de grootte van uw Windows-partitie aanpassen. Wees "
-"voorzichtig:\n"
-"deze operatie is gevaarlijk. Als u dit niet reeds gedaan heeft, draait u\n"
-"best eerst scandisk (en eventueel defrag) op deze partitie en maakt u ook\n"
-"best een veiligheidskopie.\n"
-"Als u zeker bent, klik Ok."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Welke grootte wilt u gebruiken om windows op?"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "Partitie %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT grootte-aanpassing mislukt: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Er is geen FAT partitie om de grootte van aan te passen of om als \n"
-"loopback te gebruiken (of er is te weinig ruimte over)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Volledige harde schijf wissen"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Verwijder Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "U heeft meer dan één harde schijf, op welke wilt u Linux installeren?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"ALLE bestaande partities en de data die ze bevatten, zal worden gewist van "
-"schijf %s"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Aangepaste schijf-partitionering"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Gebruik fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"U kan nu uw schijf %s partitioneren.\n"
-"Vergeet niet op te slaan met `w' wanneer u klaar bent."
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "U heeft niet genoeg vrije ruimte op uw Windows partitie"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Ik kan geen partitie meer toevoegen"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "De DrakX partitie wizard heeft de volgende oplossingen gevonden:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partitionering mislukt: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Bezig met opstarten van het netwerk"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Bezig met stoppen van het netwerk"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Er is een fout opgetreden, maar ik weet niet hoe deze te behandelen.\n"
-"Als u verdergaat, is dit op eigen risico."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dubbel koppelpunt %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Sommige belangrijke pakketen werden niet juist\n"
-"geïnstalleerd. Of uw cdrom drive of uw cdrom is defect.\n"
-"Controleer de cdrom op een geïnstalleerde computer met\n"
-"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Welkom bij %s!"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Geen diskettestation beschikbaar"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Overgang naar stap `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Selecteer de grootte die u wenst te installeren"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Totale grootte: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versie: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Grootte: %d kB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Kies de pakketten die u wenst te installeren"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Info"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Installeren"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Bezig met installeren"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Even geduld, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Tijd over "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Totale tijd "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Bezig met voorbereiden van installatie"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Bezig met installeren van pakket %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Toch verdergaan?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Er was een fout bij het sorteren van de pakketten:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Bestaande configuratie gebruiken voor X11?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Uw systeem heeft weinig bronnen beschikbaar. U zou problemen kunnen\n"
-"ondervinden bij het installeren van Mandrake Linux. Als dit gebeurt,\n"
-"kunt u een text installatie proberen. Om dit te doen, drukt u op `F1'\n"
-"terwijl de CDROM opstart, en dan voert u `text' in."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Installatie-klasse"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Gelieve een van de volgende installatieklasses te kiezen:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "De totale grootte voor de geselecteerde groepen is ongeveer %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Als u minder dan deze grootte wenst te installeren,\n"
-"selectere dan het percentage pakketten dat u wenst te installeren.\n"
-"\n"
-"Een laag percentage zal enkel de belangrijkste pakketten installeren;\n"
-"een percentage van 100%% zal alle geselecteerde pakketten installeren."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"U heeft schijfruimte voor slechts %d%% van deze pakketten.\n"
-"\n"
-"Als u minder wenst te installeren,\n"
-"selecteer dan het percentage pakketten dat u wenst te installeren.\n"
-"Een laag percentage zal enkel de belangrijkste pakketten installeren;\n"
-"een percentage van %d%% zal alle geselecteerde pakketten installeren."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Het is mogelijk preciezer te kiezen in de volgende stap."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Percentage pakketten om te installeren"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Pakket-groep Selectie"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Individuele pakketselectie"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Totale grootte: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Slecht pakket"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Naam: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Belangrijkheid: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "U kan dit pakket niet selecteren omdat er te weinig vrije ruimte is"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "De volgende pakketten zullen geïnstalleerd worden"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "De volgende pakketten zullen gedeïnstalleerd worden"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "U kan dit pakket niet (de)selecteren"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dit is een verplicht pakket, het kan niet gedeselecteerd worden"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "U kan dit pakket niet deselecteren. Het is al geinstalleerd."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Dit pakket moet geupgrade worden\n"
-"Bent u zeker dat u het wenst te deselecteren?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "U kan dit pakket niet deselecteren. Het moet geupgrade worden."
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Toon automatisch geselecteerde pakketten"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Laden/Opslaan op diskette"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "Bezig met vernieuwen van pakket-selectie"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "Minimale installatie"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Bezig met schatten"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Bezig met voorbereiden van installatie, even geduld alstublieft"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d pakketten"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Waarschuwing\n"
-"\n"
-"Leest u alstublieft de voorwaarden hieronder. Als u het niet eens bent \n"
-"met eender welk onderdeel, is het u niet toegestaan om de volgende \n"
-"CD-media te installeren. Klik op 'Weigeren' om de installatie voort te \n"
-"zetten zonder deze media te gebruiken.\n"
-"\n"
-"\n"
-"Sommige componenten die op de volgende CD-media staan staan niet \n"
-"onder de GPL-licentie of dergelijke overeenkomsten. Ieder van deze \n"
-"componenten valt onder de regels en voorwaarden van zijn eigen \n"
-"specifieke licentie. Leest u dergelijke licenties alstublieft aandachtig \n"
-"en ga ermee akkoord voordat u de genoemde componenten gebruikt \n"
-"of opnieuw distribueert. \n"
-"Dergelijke licenties zullen in het algemeen het overnemen, dupliceren \n"
-"(behalve voor reservekopie-doeleinden), herdistribueren, reverse \n"
-"engineering, de-assemblage, de-compilatie of aanpassing van het \n"
-"component voorkomen. Het doorbreken van deze overeenkomst zal \n"
-"onmiddelijk uw rechten onder de specifieke licentie opheffen. Tenzij \n"
-"de specifieke licentie u zulke rechten toekent, kunt u in het algemeen \n"
-"de programma's niet op meer dan één machine installeren, of hen \n"
-"aanpassen voor gebruik over een netwerk. Als u twijfelt, neem dan \n"
-"alstublieft rechtstreeks contact op met de distributeur van het \n"
-"component. \n"
-"Het doorgeven aan een derde partij of het kopiëren van dergelijke \n"
-"componenten is in het algemeen verboden.\n"
-"\n"
-"\n"
-"Alle rechten op de componenten van de volgende CD-media behoren \n"
-"aan hun respectievelijke auteurs en zijn beschermd door wetten met \n"
-"betrekking tot intellectueel eigendom en copyright van software- \n"
-"programma's. \n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Accepteren"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Weigeren"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Verwissel uw CD-ROM!\n"
-"\n"
-"\n"
-"Gelieve de CD-ROM met als naam \"%s\" in uw station te plaatsen en Ok te "
-"kiezen wanneer u klaar bent.\n"
-"Als u deze CD niet heeft, klik dan Annuleren om verdere installatie vanaf "
-"deze CD te vermijden."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Er was een fout bij het installeren van de pakketten:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Er is een fout opgetreden"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Licentie overeenkomst"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Toetsenbord"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Wat is uw toetsenbord-layout?"
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Welke installatie-klasse wenst u?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Installatie/Update"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Is dit een installatie of een upgrade?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Aanbevolen"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Update"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Welk type muis heeft u?"
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Muispoort"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Met welke seriële poort is uw muis verbonden?"
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Muisknoppen emuleren"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Emuleren van knop 2"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Emuleren van knop 3"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Bezig met configureren van PCMCIA-kaarten..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "IDE-Configuratie"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "Geen beschikbare partities"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Bezig met scannen van partities om mount punten te vinden"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Selecteer de koppelpunten"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ik kan uw partitietabel niet lezen, ze is te corrupt voor mij :-(\n"
-"Ik kan proberen door te gaan en de slechte partities verwijderen\n"
-"(ALLE DATA zal worden gewist!).\n"
-"De andere oplossing is om DrakX de de partitie tabel niet te laten "
-"aanpassen.\n"
-"(de fout is %s)\n"
-"\n"
-"Gaat u ermee akkoord alle partities te verliezen?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake kon de partitietabel niet correct inlezen.\n"
-"Als u verdergaat, is dit op eigen risico!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Er is geen vrije ruimte voor een \"bootstrap\" van 1MB! De installatie zal "
-"doorgaan, maar om uw systeem op te starten zult u de bootstrap partitie in "
-"DiskDrake moeten creëren."
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "Geen \"root\"-partitie gevonden om op te waarderen"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Root-partitie"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Wat is de root-partitie (/) van uw systeem?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"U dient te herstarten om de wijzigingen in de partitietabel te activeren."
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Kies de partities die u wenst te formatteren"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Slechte blocks checken?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Bezig met formatteren van partities"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Bezig met aanmaken en formatteren van bestand %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Niet genoeg swap voor de installatie, voeg er wat toe"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Bezig met zoeken naar beschikbare pakketten"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Bezig met zoeken naar pakketten om op te waarderen"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Uw systeem heeft niet genoeg ruimte over voor installatie of upgrade (%d > %"
-"d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Volledig (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimaal (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Aanbevolen (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Aangepast"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Laden van diskette"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Bezig met het laden van diskette"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Pakket-selectie"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "Plaats een diskette met de pakket-selectie in diskettestation"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Schrijven naar floppy"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "De geselecteerde grootte is meer dan de beschikbare ruimte"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Als u alle CDs in de lijst hierboven heeft, klik dan Ok.\n"
-"Als u geen enkele van die CDs heeft, klik dan Annuleren.\n"
-"Als maar enkele CDs zoek zijn, deselecteer ze dan, en klik Ok."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-Rom genaamd \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Bezig met installeren van pakket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Installatie na configuratie"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Plaats de gebruikte Opstartdiskette in station %s alstublieft"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Plaats de \"Modules Opwaarderen\"-diskette in station %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Kies een `mirror' om de pakketten van af te halen"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Bezig met de `mirror' te contacteren om de lijst met beschikbarepakketten te "
-"verkrijgen"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Kies de pakketten die u wenst te installeren."
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Wat is uw tijdzone?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "Hardware-klok ingesteld op GMT"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "NTP-server"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Netwerk CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Geen printer"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Overzicht"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Muis"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Tijdzone"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Printer"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "Interne ISDN kaart"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Geluidskaart"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV-kaart"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Bestanden op deze computer"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Root-wachtwoord instellen"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Geen wachtwoord"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Dit wachtwoord is te makkelijk (moet tenminste %d tekens lang zijn)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Authenticatie"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "Authenticatie LDAP"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "LDAP-server"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "Authenticatie NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS-domein"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS-server"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Een bootdiskette zorgt ervoor dat u nog in uw Linux-systeem kan zonder\n"
-"afhankelijk te zijn van de normale bootloader. Dit is handig als u LILO\n"
-"(of grub) niet wil installeren op uw systeem, of als een ander "
-"besturingssysteem\n"
-"LILO verwijdert, of LILO werkt niet met uw hardware-configuratie.\n"
-"Een bootdiskette kan ook gebruikt worden met het Mandrake-reddings-image,\n"
-"waardoor het veel makkelijker wordt om te herstellen van grote systeem-\n"
-"fouten. Wil u nu een bootdiskette aanmaken voor uw systeem?\n"
-"Stop dan een diskette in het station en druk op \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Eerste diskettestation"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Tweede diskettestation"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Overslaan"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Een bootdiskette zorgt ervoor dat u nog in uw Linux-systeem kan zonder\n"
-"afhankelijk te zijn van de normale bootloader. Dit is handig als u LILO\n"
-"(of grub) niet wil installeren op uw systeem, of als een ander "
-"besturingssysteem\n"
-"LILO verwijdert, of LILO werkt niet met uw hardware-configuratie.\n"
-"Een bootdiskette kan ook gebruikt worden met het Mandrake-reddings-image,\n"
-"waardoor het veel makkelijker wordt om te herstellen van grote systeem-\n"
-"fouten. Wil u nu een opstartdiskette aanmaken voor uw systeem?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Sorry, geen diskettestation beschikbaar"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Kies het diskettestation waarmee u de opstart-diskette wenst te maken"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Plaats een diskette in station %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Bezig met het aanmaken van de opstart-diskette"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Bezig met klaarmaken van opstartlader"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Het heeft er alle schijn van dat u een OldWorld-\n"
-" of Onbekende machine heeft. De yaboot opstartlader \n"
-" zal voor u niet werken.\n"
-"De installatie zal doorgaan, maar u zult BootX nodig \n"
-"hebben om uw machine op te starten"
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Wenst u aboot te gebruiken?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fout bij het installeren van aboot,\n"
-"toch proberen te installeren, zelfs als dat de eerste partitie vernietigt?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-msgid "Installing bootloader"
-msgstr "Bezig met opstart-lader installeren"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"De installatie van de bootloader is mislukt. De volgende fout werd gevonden:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Wellicht is het nodig om uw Open Firmware opstart-apparaat \n"
-" te veranderen om de opstartlader te activeren. Wanneer u geen \n"
-" opstartlader-prompt bij het opnieuw opstarten ziet, houdt dan \n"
-" Command-Option-O-F ingedrukt bij het opstarten en voer in: \n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Vervolgens voert u in: shut-down\n"
-"Bij de volgende keer opstarten zou u dan de opstartlader-prompt \n"
-"moeten zien."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Laag"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Medium"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Hoog"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Kies een veiligheids-niveau"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Plaats een lege floppy in station %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Bezig met aanmaken van auto-installatiediskette"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Maak auto-installatiediskette aan"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Desgewenst kan de auto-installatie volledig geautomatiseerd worden,\n"
-"in dat geval zal het de harde schijf overnemen!\n"
-"(Deze functie is bedoeld voor het installeren op een andere machine.)\n"
-"\n"
-"Wellicht geeft u de voorkeur aan het herhalen van de installatie.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Geautomatiseerd"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Herhalen"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Pakket-selectie opslaan"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installatie %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> tussen elementen | <Spatie> selecteert | <F12> volgend "
-"scherm "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu is afwezig!"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "Kies een bestand"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Geavanceerd"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Even geduld"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr ""
-"Boom\n"
-"Uitbreiden"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr ""
-"Boom\n"
-"Inklappen"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Schakelen tussen gewoon en per-groep-gesorteerd"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Verwarring (%s), wees meer precies\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Slechte keuze, probeer nog eens\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (standaard %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Uw keuze? (standaard %s)"
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Uw keuze? (standaard %s, geef `geen' voor geen)"
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Tsjechisch (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Duits"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Spaans"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Fins"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Frans"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Noors"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Pools"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Russisch"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Zweeds"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "UK toetsenbord"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "US toetsenbord"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Albanees"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armeens (oud)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armeens (typmachine)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armeens (fonetisch)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbeidzjan (latin)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belgisch"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulgaars"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Braziliaans (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Belarusiaans"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Zwitsers (Duitse layout)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Zwitsers (Franse layout)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Tsjechisch (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Duits (geen dode toetsen)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Deens"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noorwegen)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Ests"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgisch (\"Russische\" layout)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgisch (\"Latin\" layout)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Grieks"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Hongaars"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Kroatisch"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Israelisch"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Israelisch (Fonetisch)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iraans"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "IJslands"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Italiaans"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japans 106 toetsen"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Koreaans toetsenbord"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latijns-Amerikaans"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lithuaans AZERTY (oud)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lithuaans AZERTY (nieuw)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lithuaans \"nummer-rij\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lithuaans \"fonetisch\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-msgid "Latvian"
-msgstr "Lets"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Macedonisch"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Nederlands"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Pools (qwerty layout)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Pools (qwertz layout)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugees"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Canadees (Quebec)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Roemeens (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Roemeens (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Roemeens (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Sloveens"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaaks (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaaks (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "Servisch (cyrillisch)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Thai-toetsenbord"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr "Tadzjikisch toetsenbord"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turks (traditioneel \"F\"-model)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turks (modern \"Q\"-model)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Oekraïens"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "US toetsenbord (internationaal)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamese \"nummer-rij\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "Joegoslavisch (latin)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Circulaire mounts: %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - muis"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standaard"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Algemene PS/2 wielmuis"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 knop"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Algemeen"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Wiel"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "seriëel"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Algemene 2-knopsmuis"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Algemene 3-knopsmuis"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech-muis (seriëel, oud C7-type)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "bus muis"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 knoppen"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 knoppen"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "geen"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Geen muis"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Test uw muis a.u.b."
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Welk type muis heeft u?"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEWEEG UW WIELTJE"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Fins"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Volgende ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Is dit correct?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Verbinden met het Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"De meest gebruikte manier om te verbinden met adsl is met\n"
-"ppoe. Sommige verbindingen gebruiken pptp, enkele gebruiken\n"
-"dhcp. Als u het niet weet, kiest u 'gebruik pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "gebruik pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "gebruik pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Welke dhcp client wenst u te gebruiken?\n"
-"Standaard is dit dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Er is geen ethernet netwerk adapter op uw systeem gevonden.\n"
-"Ik kan dit type connectie niet opzetten."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Kies de netwerk interface"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Kies a.u.b. met welke netwerkkaart u met het Internet wilt verbinden"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "Geen netwerkkaart gevonden"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Bezig met configureren van netwerk"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Gelieve uw hostnaam in te voeren als u deze kent.\n"
-"Sommige DHCP servers hebben de hostnaam nodig om te werken.\n"
-"Het moet een volledige hostnaam zijn, zoals ``mybox.mylab.myco.com''.\n"
-"U mag ook het IP-adres van de gateway invoeren als u er een heeft."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Host naam:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Netwerk-configuratie wizard"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Extern ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interne ISDN kaart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Wat voor een ISDN connectie heeft u?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nieuwe configuratie (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Oude configuratie (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN Configuratie"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Selecteer uw provider.\n"
-" Als uw provider niet in de lijst staat, kiest u Unlisted"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "Europees protocol (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "Protocol voor de rest van de wereld"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protocol voor de rest van de wereld \n"
-" geen D-Channel (geleasde lijnen)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Welk protocol wenst u te gebruiken?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Welk type kaart heeft u?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Ik weet het niet"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Als u een ISA kaart bezit, zouden de waardes op het volgende scherm moeten "
-"kloppen.\n"
-"\n"
-"Als  u een PCMCIA kaart bezit, moet u het irq en io van uw kaart weten.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Annuleren"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Verder"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Welke is uw ISDN kaart?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ik heb een ISDN PCI kaart gevonden, maar ik ken het merk niet. Selecteer a.u."
-"b. een PCI kaart op het volgende scherm."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Geen ISDN PCI kaart gevonden. Selecteer a.u.b. uw kaart op het volgende "
-"scherm."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Met welke seriële poort is uw modem verbonden?"
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Inbel-opties"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Verbindingsnaam"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Telefoonnummer"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Aanmeldingsnaam"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Gebaseerd op een script"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Gebaseerd op een terminal"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Domeinnaam"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Eerste DNS-server (optioneel)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Tweede DNS-server (optioneel)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"U kunt nu de verbrinding verbreken of uw connectie herconfigureren."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"U kunt uw connectie herconfigureren"
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "U bent op dit moment aangesloten op het Internet."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"U kunt verbinding maken met het Internet of uw connectie herconfigureren"
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "U bent op dit moment niet aangesloten op het Internet."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Verbind met het Internet"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Verbreek verbinding met het Internet"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Configureer uw netwerk connectie(LAN of Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Internet verbinding & configuratie"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "We gaan nu de %s -verbinding configureren."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"We gaan nu de %s -verbinding configureren.\n"
-"\n"
-"\n"
-"Klik op OK om door te gaan."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Netwerk-configuratie"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Kies het profiel om te configureren"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Bezig met het detecteren van apparaten..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Normale modemverbinding"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "gevonden op poort %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN-verbinding"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ADSL-verbinding"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "gevonden op interface %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Kabelverbinding"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "kabelverbinding gevonden"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "LAN-verbinding"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "ethernet kaart(en) gevonden"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Selecteer de verbinding die u wenst te configureren"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"U heeft meerdere manieren om te verbinden met het Internet geconfigureerd.\n"
-"Kies degene die u wenst te gebruiken.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Internetverbinding"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Wenst u bij aboot uw connectie te starten?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Netwerk configuratie"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Een probleem deed zich voor bij het herstarten van het netwerk:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"WAARSCHUWING: Dit apparaat is al geconfigureerd om verbinding te maken met "
-"Internet.\n"
-"Accepteer gewoon de instellingen om dit apparaat geconfigureerd te laten.\n"
-"Als u de onderstaande velden aanpast, wordt het apparaat opnieuw "
-"geconfigureerd"
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Gelieve de IP-configuratie voor deze machine in te geven.\n"
-"Elke ingang moet ingegeven worden als een IP adres in `dotted-decimal'-\n"
-"vorm (bijvoorbeeld 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Bezig met configureren van netwerk-apparaat %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr "(driver %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP adres"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Netmasker"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(BootP/DHCP)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Automatisch IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Het IP-adres moet het formaat 1.2.3.4 hebben"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Gelieve uw hostnaam in te voeren.\n"
-"Het moet een volledige hostnaam zijn, zoals ``mybox.mylab.myco.com''.\n"
-"U mag ook het IP-adres van de gateway invoeren als u er een heeft."
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS server"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Gateway apparaat"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Configuratie van proxie(s)"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP-proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP-proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Proxy moet http://... zijn"
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Proxy moet ftp://... zijn"
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Internet configuratie"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Wenst u nu te proberen een connectie te maken met Internet?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Bezig met testen van uw connectie..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "U bent op dit moment aangesloten op het Internet."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Het lijkt erop dat dit systeem niet aangesloten is met\n"
-"het internet. Probeer uw connectie te herconfigureren."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Connectie configuratie"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Selecteer of vul onderstaand veld a.u.b. in"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ van de kaart"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Mem (DMA) van de kaart"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "IO van de kaart"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "IO_0 van de kaart"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "IO_1 van de kaart"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Uw persoonlijke telefoonnummer"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Naam van uw provider (bijv. provider.nl)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Telefoonnummer van uw provider"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 van uw provider (optioneel)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 van uw provider (optioneel)"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "Kies uw land"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Inbel mode"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Verbindingssnelheid"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "Maximale wachttijd voor verbinding (in seconden)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Account Login (gebruikers-naam)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Wachtwoord"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Extended partitie niet ondersteund op dit platform"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Er zit een gat in uw partitietabel, maar ik kan het niet gebruiken.\n"
-"De enige oplossing is om uw primaire partitie te verplaatsen zodat het gat "
-"naast de extended partitie komt te liggen"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Het herstellen van bestand %s is niet gelukt: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Slechte reservekopie"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fout bij het schrijven naar bestand %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "must-have"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "belangrijk"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "heel leuk"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "leuk"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "misschien"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Lokale printer"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Netwerk printer"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "Printer aan CUPS server op afstand"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "Printer aan lpd server op afstand"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Netwerkprinter (socket)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Printer aan SMB/Windows 95/98/NT server"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "Printer aan NetWare server"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "Voer een apparaat-URI voor de printer in"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "Job doorsluizen naar een commando"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "Onbekend model"
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(aan %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "(aan deze machine)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Selecteer Printer-verbinding"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hoe is de printer verbonden?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"Printers aan een CUPS-server op afstand hoeft u hier niet te configureren;\n"
-"deze printers zullen automatisch gedetecteerd worden.\n"
-"Selecteert u in dit geval \"Printer aan CUPS server op afstand\" alstublieft."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Geen"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-msgid "Choose a default printer!"
-msgstr "Kies alstublieft een standaardprinter!"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-"Met CUPS-servers op afstand, hoeft u hier geen printer te configureren;\n"
-" CUPS-servers informeren uw machine automatisch over hun printers.\n"
-"Alle printers die op dit moment bekend zijn bij uw machine zijn vermeld\n"
-"in het \"Standaard printer\"-veld. Kies de standaard printer voor uw\n"
-"machine dáár en klik op de \"Toepassen/Printers opnieuw inlezen\"-knop.\n"
-"Klik op dezelfde knop om de lijst te verversen (het kan tot 30 seconden\n"
-"na de start van CUPS duren totdat alle printers op afstand zichtbaar zijn.\n"
-"Als uw CUPS-server zich bevindt in een ander netwerk, dan geeft u het\n"
-"CUPS-server IP-adres en optioneel het poortnummer om de printerinformatie\n"
-"van de server te verkrijgen. Anders laat u deze velden leeg."
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normaal gesproken wordt CUPS automatisch geconfigureerd aan\n"
-"de hand van uw netwerkomgeving, zodat u toegang heeft tot de\n"
-"printers op de CUPS-servers in uw netwerk. In het geval dat dit\n"
-"niet goed gaat, zet dan \"Automatische CUPS configuratie\" uit\n"
-"en bewerk uw bestand /etc/cups/cupsd.conf handmatig. Vergeet\n"
-"u niet daarna CUPS te herstarten (commando: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Sluiten"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "Toepassen/Printers opnieuw inlezen"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Het IP-adres zou er uit moeten zien als 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "Standaard printer"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "CUPS-server IP"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Poort"
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr "Automatische CUPS-configuratie"
-
-#: ../../printerdrake.pm_.c:217
-msgid "Detecting devices ..."
-msgstr "Bezig met het zoeken van apparaten..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Poorten testen"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Een printer, model \"%s\", werd gedetecteerd op"
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Lokale Printer"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Met welke poort is uw printer verbonden \n"
-"(/dev/lp0 is equivalent met LPT1:) ?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Printerapparaat:"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-msgid "Reading printer database ..."
-msgstr "Bezig met lezen van printer-database..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "lpd op afstand - Printer-opties"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Om een lpd-printer op afstand te gebruiken, moet u de\n"
-"hostnaam van de printerserver en de printernaam op die\n"
-"server invoeren."
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "Naam van host op afstand:"
-
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "Naam van printer op afstand"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "De naam van de host op afstand is afwezig!"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "De naam van de printer op afstand is afwezig!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Printer-opties"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Om naar een SMB-printer af te drukken, moet u de SMB\n"
-"hostnaam (Deze kan verschillen van de TCP/IP hostnaam) ingeven\n"
-"en mogelijk het IP-adres van de server, alsook de sharenaam van de\n"
-"printer en indien nodig een gebruikersnaam, wachtwoord en werkgroep."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "SMB-server host"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "SMB-server IP"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Naam van gedeelde bron"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Werkgroep"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Ofwel de servernaam ofwel het IP van de server moet ingevoerd worden!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "Naam van de gedeelde Samba-bron is afwezig!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "NetWare Printer-Opties"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Op naar een NetWare-printer af te drukken, moet u de NetWare Printer\n"
-"servernaam opgeven (Deze kan verschillen van de TCP/IP hostnaam!) en ook\n"
-"de printerwachtrij en indien nodig een gebruikersnaam en wachtwoord."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Printer Server"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Naam van de printerwachtrij"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "NCP-servernaam is afwezig!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "NCP-wachtrijnaam is afwezig!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Socket Printer opties"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Om naar een socket printer te printen, moet u de host- \n"
-"naam van de printer en optioneel het poortnummer geven.\n"
-"Op HP JetDirect-servers is het poortnummer in het algemeen\n"
-"9100, op andere servers kan het variëren. U zij verwezen naar\n"
-"het handboek van uw hardware."
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "Printer hostnaam"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "Printer hostnaam is afwezig!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Printerapparaat URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"U kunt de URI om de printer aan te spreken direct opgeven. De URI moet\n"
-"voldoen aan ofwel de CUPS-, ofwel de Foomatic specificaties. Let op dat\n"
-"niet alle URI-typen door alle \"spoolers\" ondersteund worden."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "Een geldige URI moet worden ingevoerd!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Elke printer heeft een naam nodig (bijvoorbeeld lp).\n"
-"De Beschrijving- en Locatie-velden behoeven niet\n"
-"te worden ingevuld. Dit zijn opmerkingen voor de\n"
-"gebruikers."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Naam van de printer"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Beschrijving"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Locatie"
-
-#: ../../printerdrake.pm_.c:701
-msgid "Preparing printer database ..."
-msgstr "Bezig met voorbereiden van printer-database..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "Selectie van printer-model"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "Welk model printer heeft u?"
-
-#: ../../printerdrake.pm_.c:866
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinter-configuratie"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet-configuratie"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"Printer standaard-instellingen\n"
-"Zorgt u ervoor dat de paginagrootte en de\n"
-"inktsoort (wanneer beschikbaar) juist ingesteld zijn.\n"
-"Let op dat een zeer hoge printkwaliteit het\n"
-"afdrukken behoorlijk kan vertragen."
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Optie %s moet een geheel getal zijn!"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Optie %s moet een getal zijn!"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Optie %s valt buiten het bereik!"
-
-#: ../../printerdrake.pm_.c:1136
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Wenst u deze printer (\"%s\")\n"
-"als standaard printer in te stellen?"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "Test-pagina's"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"Gelieve de test-pagina's die u wenst te printen te selecteren.\n"
-"Let op: het kan een nogal lange tijd in beslag\n"
-"nemen voordat de foto-test-pagina is uitgeprint\n"
-"en op laserprinters met onvoldoende geheugen wordt deze wellicht\n"
-"helemaal niet afgedrukt. In de meeste gevallen is het voldoende om\n"
-"de standaard test-pagina af te drukken."
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "Geen test-pagina's"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "Afdrukken"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "Standaard testpagina"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr "Alternatieve test-pagina (Letter-formaat)"
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr "Alternatieve test-pagina (A4-formaat)"
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "Foto-testpagina"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Bezig met afdrukken van testpagina(s)..."
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testpagina('s) werd(en) naar de printer gestuurd.\n"
-"Het kan even duren voordat het eigenlijke afdrukken begint.\n"
-"Print-status:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testpagina's) werd(en) naar de printer gestuurd.\n"
-"Het kan even duren voordat het eigenlijke afdrukken begint.\n"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "Werkt het afdrukken naar behoren?"
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-msgid "Raw printer"
-msgstr "Kale ('raw') printer"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Om een bestand vanaf de commandoregel (terminalvenster) af te drukken, "
-"gebruikt u ofwel het commando \"%s  <bestand>\", ofwel een grafisch "
-"printerhulpprogramma: \"xpp <bestand>\" of \"qtcups <bestand>\". De "
-"grafische hulpprogramma's stellen u in staat om de printer te kiezen en "
-"gemakkelijk de opties te wijzigen.\n"
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Deze commando's kunt u ook invullen in het \"Print-commando\"-veld van "
-"printdialogen van veel applicaties. Maar vul daar dan geen bestandsnaam in "
-"omdat het af te drukken bestand wordt geleverd door de applicatie.\n"
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-"Om een lijst te verkrijgen van alle beschikbare opties voor de huidige "
-"printer, kunt u ofwel de lijsthieronder lezen, ofwel klikken op de knop "
-"\"Lijst van print-opties\".\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Om een bestand vanaf de commandoregel (terminalvenster) af te drukken, \n"
-"gebruikt u het commando \"%s <bestand>\".\n"
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Dit commando kunt u ook invullen in het \"Print-commando\"-veld van "
-"printdialogen van veel applicaties. Maar vul daar dan geen bestandsnaam in "
-"omdat het af te drukken bestand wordt geleverd door de applicatie. \n"
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-"Om een lijst te verkrijgen van alle beschikbare opties voor de huidige "
-"printer, kunt u \n"
-"klikken op de knop \"Lijst van print-opties\".\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Om een bestand vanaf de commandoregel (terminalvenster) af te drukken, \n"
-"gebruikt u het commando \"%s <bestand>\" of \"%s <bestand>\".\n"
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Wanneer u KDE als bureau-omgeving gebruikt dan heeft u de beschikking over "
-"een \"paniek-knop\", een pictogram op het bureaublad, met daarop de tekst "
-"\"STOP Printer!\", welke onmiddelijk alle printtaken stopt wanneer u er op "
-"klikt. Dit is handig bijvoorbeeld in het geval van papierstoringen.\n"
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Bezig met afdrukken op printer \"%s\""
-
-#: ../../printerdrake.pm_.c:1294
-msgid "Print option list"
-msgstr "Lijst van print-opties"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "Bezig met lezen van printer-informatie..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "Printer-configuratie overzetten"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-"U kunt de printerconfiguratie die u voor spooler %s uitgevoerd heeft, \n"
-"kopiëren naar %s, uw huidige spooler. Alle configuratiegegevens \n"
-"(printernaam, beschrijving, locatie, verbindingssoort, en standaard \n"
-"opties) worden dan overgenomen, maar taken zullen niet \n"
-"worden overgezet.\n"
-"Niet alle wachtrijen kunnen worden overgezet, vanwege de \n"
-"volgende redenen:\n"
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-"CUPS ondersteunt geen printers op Novell-servers of printers\n"
-"die gegevens in een vrije vorm-commando versturen.\n"
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-"PDQ ondersteunt alleen printers aan deze computer,\n"
-"LPD printers op afstand, en Socket/TCP printers.\n"
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD en LPRng ondersteunen geen IPP printers.\n"
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-"Daarbij komt dat wachtrijen die niet met dit programma of\n"
-"met \"foomatic-configure\" zijn aangemaakt, niet kunnen\n"
-"worden overgezet."
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-"\n"
-"Ook printers geconfigureerd met door hun fabrikant geleverde \n"
-"PPD-bestanden, of met eigen CUPS drivers, kunnen niet \n"
-"worden overgezet."
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Markeer de printers die u wilt overzetten en klik \n"
-"\"Overzetten\"."
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "De printers niet overzetten"
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "Overzetten"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Een printer met de naam \"%s\" bestaat al onder %s. \n"
-"Klik op \"Overzetten\" om deze te overschrijven.\n"
-"U kunt ook een nieuwe naam ingeven of deze printer overslaan."
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Een printernaam mag alleen letters, getallen en een laag liggend streepje "
-"bevatten"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"De printer \"%s\" bestaat reeds, \n"
-"weet u zeker dat u de configuratie ervan wilt overschrijven?"
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "Nieuwe printernaam"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Bezig met overzetten van %s ..."
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-"U heeft uw vorige standaardprinter (\"%s\")\n"
-" overgezet. Moet dit ook de standaardprinter worden \n"
-"in het nieuwe printsysteem %s?"
-
-#: ../../printerdrake.pm_.c:1423
-msgid "Refreshing printer data ..."
-msgstr "Bezig met verversen van printergegevens..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr "Printer-op-afstand configureren"
-
-#: ../../printerdrake.pm_.c:1432
-msgid "Starting network ..."
-msgstr "Bezig met inschakelen van het netwerk..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-msgid "Configure the network now"
-msgstr "Configureer het netwerk nu"
-
-#: ../../printerdrake.pm_.c:1455
-msgid "Network functionality not configured"
-msgstr "Netwerk-functionaliteit niet geconfigureerd"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-"U staat op het punt een printer-op-afstand te configureren. \n"
-"Hiervoor is een werkende netwerktoegang vereist, maar uw \n"
-"netwerk is nog niet geconfigureerd. Als u verder wilt gaan \n"
-"zonder netwerkconfiguratie, zult u niet in staat zijn om de \n"
-"printer te gebruiken die u nu configureert. Hoe wenst u \n"
-"verder te gaan?"
-
-#: ../../printerdrake.pm_.c:1463
-msgid "Go on without configuring the network"
-msgstr "Doorgaan zonder configureren van netwerk"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-"De netwerk-configuratie die uitgevoerd is tijdens de \n"
-"installatie kan op dit moment niet worden ingeschakeld. \n"
-"Kijkt u alstublieft na of het netwerk toegankelijk is na het \n"
-"opstarten van uw systeem. De configuratie is te corrigeren \n"
-"met het Mandrake Control Center, onderdeel \n"
-"\"Netwerk & Internet\"/\"Verbinding\". Daarna kunt u de \n"
-"printer instellen, ook met het Mandrake Control Center, \n"
-"onderdeel \"Hardware\"/\"Printer\""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-"De netwerktoegang was nog niet actief en kon ook \n"
-"niet worden ingeschakeld. Gelieve uw configuratie en \n"
-"uw hardware na te kijken. Probeert u daarna opnieuw \n"
-"uw printer-op-afstand te configureren."
-
-#: ../../printerdrake.pm_.c:1516
-msgid "Restarting printing system ..."
-msgstr "Bezig met herstarten van het printsysteem..."
-
-#: ../../printerdrake.pm_.c:1548
-msgid "high"
-msgstr "hoog"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "paranoid"
-msgstr "paranoïde"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Starting the printing system at boot time"
-msgstr "Het printsysteem zal bij het opstarten worden ingeschakeld"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "Bezig met nagaan welke software geïnstalleerd is..."
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "Bezig met verwijderen van LPRng..."
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "Bezig met verwijderen van LPD..."
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Selecteer printer-spooler"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Welk printsysteem (\"spooler\")  wilt u gebruiken?"
-
-#: ../../printerdrake.pm_.c:1759
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Bezig met configureren van printer \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Printer-opties"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr "Bezig met het voorbereiden van PrinterDrake..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "Wenst u een printer in te stellen?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr "Printsysteem:"
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-"De volgende printers zijn geconfigureerd.\n"
-"Klik op één ervan om diegene te wijzigen of\n"
-"om informatie erover te verkrijgen. Klik op \n"
-"\"Printer toevoegen\" om een nieuwe printer\n"
-"toe te voegen."
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Normale modus"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Standaard)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Printer(s) aan CUPS server(s) op afstand"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-msgid "Printer(s) on remote server(s)"
-msgstr "Printer(s) aan server(s) op afstand"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Printer toevoegen"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-msgid "Do you want to configure another printer?"
-msgstr "Wenst u een andere printer te configureren?"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "Printerconfiguratie aanpassen"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Printer %s: %s %s\n"
-"Wat wilt u aanpassen aan deze printer?"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "Doe het!"
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "Soort printerverbinding"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "Printernaam, beschrijving, locatie"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "Printerfabrikant, model, aansturingsprogramma"
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "Printerfabrikant, model"
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr "Stel deze printer in als standaardprinter"
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "Druk testpagina('s) af"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr "Weet hoe met deze printer kan worden afgedrukt"
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "Printer verwijderen"
-
-#: ../../printerdrake.pm_.c:2071
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Bezig met verwijderen van oude printer \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "De \"%s\"-printer is nu ingesteld als de standaardprinter."
-
-#: ../../printerdrake.pm_.c:2103
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Weet u zeker dat u de printer \"%s\" wilt verwijderen?"
-
-#: ../../printerdrake.pm_.c:2105
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Bezig met verwijderen van printer \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Configuratie van proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Welkom bij de proxy-configuratie.\n"
-"\n"
-"Hier kunt u uw http en ftp proxy's opgeven, al dan niet\n"
-"met loginnaam en wachtwoord\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Gelieve de http proxy-informatie in te vullen.\n"
-"Laat het leeg in het geval u geen http proxy wenst."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "poort"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Proxy moet beginnen met http:"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Het poort-gedeelte moet numeriek zijn"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Gelieve de ftp-proxy informatie\n"
-"in te vullen. Laat het leeg als u geen ftp proxy wenst"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL moet beginnen met ftp:"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Voer alstublieft de proxy loginnaam en wachtwoord\n"
-"in, als deze er zijn. In andere gevallen laat u dit leeg."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "loginnaam"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "wachtwoord"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "Voer wachtwoord opnieuw in"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "De wachtwoorden kloppen niet met elkaar. Probeert u het opnieuw!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan geen partitie toevoegen aan een _geformatteerde_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Kan niet schrijven naar bestand %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid-fout!"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid-fout! (misschien ontbreken de raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Niet genoeg partities voor RAID-niveau %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, een periodieke commando-planner."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd is gebruikt voor het controleren van de batterijstatus en om dit te "
-"loggen via syslog.\n"
-"Het kan ook gebruikt worden om de machine uit te schakelen als het "
-"spanningsniveau van de batterij laag is."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Start commando's die door het at commando gepland zijn op het moment dat\n"
-"werd opgegeven als at werd gestart, en draait batch-commando's wanneer het "
-"load-average laag genoeg is."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron is een standaard UNIX-programma dat door de gebruiker gespecificeerde "
-"programma's start\n"
-"op periodiek geplande tijden. vixie cron voegt een aantal 'features' toe "
-"aande basis UNIX-cron,\n"
-"waaronder betere veiligheid en krachtigere configuratieopties."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM voegt muisondersteuning toe aan text-based Linux-toepassingen zoals de\n"
-"Midnight Commander. Het laat ook mouse-based console knippen-en-plakken "
-"toe,\n"
-"en biedt ook ondersteuning voor pop-up menu's op de console."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake draait als een hardware-sonde, en eventueel \n"
-"configureert het nieuwe of veranderde hardware."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache is een World Wide Web-server. Het wordt gebruikt om HTML files\n"
-"aan te bieden, en CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"De internet superserver daemon (meestal inetd genoemd) start een hele\n"
-"hoop andere internetdiensten wanneer nodig. Het is verantwoordelijk voor\n"
-"vele diensten, waaronder telnet, ftp, rsh en rlogin. Als u inetd "
-"uitschakelt,\n"
-"schakelt u alle diensten uit waar de daemon verantwoordelijk voor is."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Pakket-filtering inschakelen voor Linux kernel 2.2-serie, om \n"
-"een firewall op te zetten die uw machine beschermt tegen \n"
-"aanvallen vanuit het netwerk."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Dit pakket laadt de geselecteerde toetsenbord-layout als ingesteld in\n"
-"/etc/sysconfig/keyboard. Dit kan geselecteerd worden via de kbdconfig "
-"utility.\n"
-"U laat dit best aanstaan voor de meeste machines."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatisch opnieuw aanmaken van kernel header in \n"
-"/boot voor /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatisch vinden en configureren van hardware bij het opstarten"
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf zal op sommige momenten regelen dat diverse \n"
-"taken worden uitgevoerd bij het opstarten, om de systeem-\n"
-"configuratie te behouden."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd is de print-daemon, die nodig is om lpr goed te laten werken. Het is\n"
-"voornamelijk een server die print-jobs naar printers stuurt en regelt."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, gebruikt om een hoge-prestatie en hoge-\n"
-"beschikbaarheid server te bouwen."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) is een Domain Name Server (DNS) die is gebruikt om hostnamen\n"
-"naar IP-adressen om te zetten."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"(Ont)koppelt alle Network File System (NFS), SMB (Lan Manager/Windows)\n"
-"en NCP (NetWare) koppelpunten."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activeert/Deactiveert alle netwerk-interfaces die geconfigureerd zijn\n"
-"om bij het opstarten ingeschakeld te worden."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS is een populair protocol voor bestandsdeling over TCP/IP-netwerken.\n"
-"Deze dienst geeft u NFS-serverfunctionaliteit, die dan wordt geregeld via "
-"het\n"
-"bestand /etc/exports."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS is een populair protocol voor bestandsdeling over TCP/IP-netwerken.\n"
-"Deze dienst geeft u NFS-bestands'locking'-functionaliteit."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatisch aanzetten van de numlock-toets onder \n"
-"commandovensters en XFree bij het opstarten."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Ondersteun de OKI 4w en compatibele winprinters"
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA-ondersteuning dient meestal om ethernet en modems in laptops te "
-"onder-\n"
-"steunen. Het zal niet gestart worden tenzij het geconfigureerd is, dus het "
-"is\n"
-"veilig om het geïnstalleerd te hebben op machines die het niet nodig hebben."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"De portmapper beheert RPC-verbindingen, die gebruikt worden door protocols\n"
-"zoals NFS en NIS. De portmap-server moet draaien op machines die fungeren\n"
-"als servers voor protocols die het RPC-mechanisme gebruiken."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix is een Mail Transport Agent, een programma dat post verplaatst\n"
-"van de ene machine naar de andere."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Bewaart en herstelt de systeem-entropy pool voor betere generatie\n"
-"van willekeurige cijfers."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Wijs rauwe apparaten toe aan blok-georiënteerde apparaten \n"
-"(zoals partities op een harde schijf), voor het gebruik van \n"
-"applicaties zoals Oracle"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"De routed daemon laat automatische IP-router-tabel updates toe via het RIP-\n"
-"protocol. RIP is vooral gebruikt op kleine netwerken, complexere routing-\n"
-"protocols zijn nodig voor complexere netwerken."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Het rstat-protocol laat gebruikers op een netwerk de prestatie-cijfers\n"
-"voor elke machine op dat netwerk op te vragen."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Het rusers-protocol laat gebruikers op een netwerk toe om de kijken wie er\n"
-"ingelogd is op de andere machines op dat netwerk."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Het rwho-protocol laat gebruikers op afstand een lijst opvragen van alle\n"
-"gebruikers die op een machine ingelogd zijn die de rwho daemon draait.\n"
-"(vergelijkbaar met finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Schakel het geluidssysteem van uw machine in"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog is de manier die vele daemons gebruiken om boodschappen te loggen "
-"naar\n"
-"verscheidene systeem-logbestanden. Het is een goed idee syslog altijd te "
-"draaien."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Laad de stuurprogramma's voor uw USB-apparaten"
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Start de X Font Server (deze is noodzakelijk voor het draaien\n"
-"van XFree)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Selecteer welke diensten automatisch gestart moeten worden bij het opstarten"
-
-#: ../../services.pm_.c:126
-msgid "Printing"
-msgstr "Afdrukken"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr "Bestanden delen"
-
-#: ../../services.pm_.c:132
-msgid "System"
-msgstr "Systeem"
-
-#: ../../services.pm_.c:137
-msgid "Remote Administration"
-msgstr "Beheer op afstand"
-
-#: ../../services.pm_.c:145
-msgid "Database Server"
-msgstr "Database-server"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Diensten: %d geactiveerd van %d geregistreerd"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Diensten"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "actief"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "gestopt"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Diensten en daemons"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Geen extra informatie over\n"
-"deze dienst beschikbaar, sorry."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Bij opstarten"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Bezig met installeren van pakketten..."
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ik kan uw partitietabel niet lezen, ze is te corrupt voor mij :-(\n"
-"Ik zal proberen door te gaan en de slechte partities te verwijderen"
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "Fout!"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ik kan het benodigde beeld-bestand `%s' niet vinden."
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "Configuratieprograma voor auto-installatie"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"U staat op het punt om een auto-installatie diskette te configureren. \n"
-"Deze functie is enigszins risicovol en moet met voorzorg gebruikt worden.\n"
-"\n"
-"Met die functie zult u in staat zijn de installatie die u heeft uitgevoerd "
-"op deze computer te herhalen. Daarbij worden u bij enkele stappen vragen "
-"gesteld, om de bijbehorende waarden aan te passen.\n"
-"\n"
-"Voor een maximale graad van veiligheid, zal het partitioneren en formatteren "
-"nooit automatisch uitgevoerd worden, ongeacht wat u gekozen heeft gedurende "
-"de installatie van deze computer.\n"
-"\n"
-"Wenst u door te gaan?"
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "Configuratie van automatische stappen"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Kiest u alstublieft voor elke stap of deze zich zal herhalen zoals bij uw "
-"installatie, of dat deze handmatig zal zijn"
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Gefeliciteerd!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"De diskette is met succes aangemaakt.\n"
-"U kunt nu uw installatie herhalen."
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Internetverbinding delen"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetverbinding delen staat op dit moment aan"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"De setup van Internet Connectie Delen is al uitgevoerd.\n"
-"Het staat op dit moment aan.\n"
-"\n"
-"Wat wenst u te doen?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "uitschakelen"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "klaar"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "herconfigureren"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Bezig met servers uitzetten..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Internetverbinding delen staat op dit moment uit."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internet Connectie Delen staat niet aan"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Het instellen van Internetverbinding delen is al uitgevoerd.\n"
-"Het staat op dit moment uit.\n"
-"\n"
-"Wat wenst u te doen?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "inschakelen"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Bezig met inschakelen van servers..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Internetverbinding delen staat op dit moment aan"
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"U staat op het punt om uw computer te configureren om zijn Internet-\n"
-"verbinding te delen. Met deze functie zullen andere computers op uw\n"
-"netwerk in staat zijn de internetverbinding van deze computer tegebruiken.\n"
-"\n"
-"Opmerking: u heeft een specifiek hiervoor bestemde netwerk-adapter nodig\n"
-"om een Local Area Network (LAN) op te zetten."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (gebruikt module %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Geen netwerk adapter op uw systeem!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Er is geen ethernet netwerkadapter op uw systeem gevonden. Gelieve het "
-"hardware configuratieprogramma te draaien."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Netwerk Interface"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Er is maar één geconfigureerde netwerkadapter op uw systeem:\n"
-"\n"
-"%s \n"
-"\n"
-"Ik sta op het punt om uw Local Area Network te koppelen aan\n"
-"deze adapter."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Kies alstublieft welke netwerkadapter verbinding zal maken met uw Local Area "
-"Network."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Waarschuwing, de netwerkadapter is al geconfigureerd.\n"
-"Ik zal deze opnieuw configureren."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potentieel LAN-adresconflict gevonden in de huidige configuratie \n"
-"van %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Firewall configuratie gedetecteerd!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Waarschuwing! Een bestaande firewall configuratie is gevonden. U kunt "
-"misschien na de installatie een handmatige aanpassing nodig hebben."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Configureren..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Bezig met het configureren van scripts, installeren van software, starten "
-"vanservers..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemen met installeren van pakket %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Alles is geconfigureerd. \n"
-"U kunt nu uw internetverbinding delen met andere gebruikers op uw Local Area "
-"Network, met gebruikmaking van automatische netwerkconfiguratie (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"De setup van Internetverbinding delen is al uitgevoerd.\n"
-"Het staat op dit moment uit."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"De setup van Internetverbinding delen is al uitgevoerd.\n"
-"Het staat op dit moment aan."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Internetverbinding delen is tot op heden nooit geconfigureerd."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Configuratie van Internetverbinding delen"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Welkom bij Internetverbinding delen! \n"
-"\n"
-"%s\n"
-"\n"
-"Klik op Configureer om de instellingen-wizard in te schakelen."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netwerk-configuratie (%d adapters)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profiel: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Wis profiel..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Te verwijderen profiel:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Nieuw profiel..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Naam van het te creëren profiel (het nieuwe profiel wordt als een kopie van "
-"het huidige aangemaakt) : "
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Hostnaam:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Internet-toegang"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Soort:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Interface:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Verbonden"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Niet verbonden"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Verbinding maken..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Verbinding neerleggen..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Bezig met opzetten van uw verbinding..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Bezig met neerleggen van uw verbinding..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"De verbinding is niet neergelegd. \n"
-"Probeer het handmatig te doen door het draaien van\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"terwijl u ingelogd bent als gebruiker 'root'."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Het systeem is niet langer verbonden."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Configureren van Internet-toegang..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "LAN configuratie"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Stuurprogramma"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protocol"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Configureer Local Area Network..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr "Klik hier om de 'wizard' in te schakelen ->"
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Toepassen"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Even geduld... bezig met toepassen van de configuratie"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"U heeft helemaal geen geconfigureerde interface.\n"
-"Configureer deze eerst door op 'Configureer' te klikken"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "LAN Configuratie"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Opstart-protocol"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Aangezet bij het opstarten"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP client"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "nu activeren"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "nu de-activeren"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"U heeft helemaal geen internetverbinding.\n"
-"Creëer er eerst één door op 'Configureer' te klikken"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Internetverbinding configureren"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Internetverbinding configureren"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Soort verbinding: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parameters"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Ethernet-kaart"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP Client"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Welkom, krakers!"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Zeer laag"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoïde"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Dit niveau moet met voorzichtigheid gebruikt worden. Het maakt uw systeem\n"
-"makkelijker te gebruiken maar erg gevoelig: het moet niet gebruikt worden "
-"als\n"
-"machine die met andere computers of het internet verbonden is. Er worden\n"
-"geen wachtwoorden gebruikt."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Wachtwoorden zijn nu ingeschakeld, maar het gebruik als genetwerkte computer "
-"is nog steeds niet aanbevolen."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Weinige verbeteringen in dit veiligheidsniveau, de grootste is dat er nu\n"
-"meer beveiligingswaarschuwingen en -controles zijn."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Dit is de standaardbeveiliging, aangeraden voor een computer die als client\n"
-"met het Internet verbonden zal worden. Er zijn nu beveiligingscontroles."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Met dit veiligheidsniveau, wordt het mogelijk dit systeem als server te "
-"gebruiken\n"
-"De beveiliging is nu goed genoeg om als server te dienen die verbindingen\n"
-"beheert met vele clients."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"We nemen niveau 4-kenmerken, maar nu is het systeem volledig afgesloten.\n"
-"Beveiligingskenmerken staan op maximum."
-
-#: ../../standalone/draksec_.c:65
-msgid "Security level"
-msgstr "Veiligheids-niveau"
-
-#: ../../standalone/draksec_.c:67
-msgid "Use libsafe for servers"
-msgstr "Gebruik libsafe voor servers"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Een bibliotheek welke bescherming biedt tegen \"buffer-overflow\"- en "
-"\"format string\"-aanvallen."
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Selecteer een veiligheids-niveau"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Controle-Centrum"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Selecteer het programma dat u wenst te gebruiken"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "gebruik: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Wenst u dat de BackSpace toets Delete geeft in het terminalvenster?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Verander Cd-Rom"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Stop a.u.b. de Installatie Cd-Rom in uw Cd-Rom drive en druk daarna op OK.\n"
-"Als u deze niet heeft, drukt u op Annuleren om live upgrade te vermijden."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Niet in staat live upgrade te starten !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "Geen seriële USB gevonden\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Derde knop emuleren?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Firewall configuratie"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Firewall configuratie"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"U heeft reeds een firewall ingesteld.\n"
-"Klik op Configureer om de firewall te wijzigen\n"
-"of te verwijderen."
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Klik op Configureer om een standaard-firewall in te stellen."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Kies uw taal"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Installatieklasse selecteren"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Harde schijf-detectie"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Muis configureren"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Toetsenbord kiezen"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Veiligheid"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Bestandssystemen instellen"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Partities formatteren"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Te installeren pakketten kiezen"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Systeem installeren"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Gebruiker toevoegen"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Netwerk-configuratie"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Diensten configureren"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Boot-diskette aanmaken"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Opstart-lader installeren"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X Configureren"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Installatie afsluiten"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Configuratie van tinyfirewall\n"
-"\n"
-"Dit programma configureert een persoonlijk instelling van de firewall\n"
-"voor deze Mandrake Linux machine. Voor een krachtige, specifieke\n"
-"firewall-oplossing, zie de gespecialiseerde MandrakeSecurity Firewall\n"
-"distributie."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"We zullen u nu enkele vragen stellen over de diensten waar u het \n"
-"Internet toestemming voor wilt geven om mee te verbinden.\n"
-"Denk alstublieft goed na over deze vragen, omdat de veiligheid \n"
-"van uw computer op het spel staat. \n"
-"\n"
-"Wanneer u op dit moment niet één van deze diensten draait,\n"
-"blokkeer deze dan met de firewall. U kunt deze configuratie \n"
-"altijd nog veranderen door dit programma opnieuw \n"
-"te starten!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Draait u een webserver op deze machine waar het hele Internet \n"
-"bij moet kunnen? Wanneer u een webserver draait die alleen door \n"
-"deze machine aangesproken moet kunnen worden, dan kunt u \n"
-"hier veilig 'nee' antwoorden. \n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Draait u een 'name server' op deze machine? Als u er geen hebt \n"
-"ingesteld om IP- en zone-informatie uit te delen naar het hele \n"
-"Internet, antwoordt u dan alstublieft 'nee'. \n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Wilt u binnenkomende Secure Shell (ssh)-verbindingen toestaan?\n"
-"Dit is een vervanging voor telnet welke u kunt gebruiken om in te \n"
-"loggen. Als u op dit moment telnet gebruikt, dan is het ten zeerste \n"
-"aan te raden om over te schakelen naar ssh. Telnet is niet versleuteld \n"
-"-- dus sommige aanvallers kunnen uw wachtwoord stelen als u het \n"
-"gebruikt. Ssh is versleuteld en staat dit soort afluisterpraktijken \n"
-"niet toe."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Draait u een mail-server hier? Als u uw berichten met pine,\n"
-"mutt of een andere tekstgebaseerde mail-client verstuurt,\n"
-"dan is het antwoord waarschijnlijk 'ja'. In andere gevalen\n"
-"kunt u dit het beste blokkeren met de firewall.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Draait u een POP- of IMAP-server hier? Dit zou gebruikt\n"
-"worden om niet-webgebaseerde mail-accounts te hosten\n"
-"via deze machine.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Het heeft er alle schijn van dat u een 2.2-kernel draait. Als\n"
-"uw netwerk-IP automatisch wordt ingesteld door een computer\n"
-"in uw huis of kantoor (dynamische toewijzing), dan moeten\n"
-"we dit toelaten. Is dit het geval?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Wordt de tijd op uw computer gesynchroniseerd met een andere computer?\n"
-"Meestal wordt dit gebruikt door middelgrote Unix/Linux-organisaties\n"
-"om de tijd voor het loggen en dergelijke te synchroniseren. Als u geen\n"
-"deel uitmaakt van een groter kantoor en hier nog nooit van gehoord\n"
-"hebt, dan is dit waarschijnlijk niet het geval."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Configuratie is gereed. Kunnen we deze wijzigingen naar schijf "
-"wegschrijven?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Kan %s niet openen: %s \n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Fout bij het openen van %s voor schrijfbewerking: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Netwerk-computer (client)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, ssh server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kantoor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "GNOME Werkstation"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Gereedschappen voor uw Palm Pilot of uw Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Werkstation"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domeinnaam en Network Information Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kantoorprogramma's: tekstverwerkers (kword, abiword), rekenbladen (kspread, "
-"gnumeric), PDF-lezers, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio-gerelateerde programma's: mp3- of midi afspelen, mengpanelen etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Boeken en Howto's over Linux en Vrije Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE Werkstation"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Verzameling programma's voor post, nieuws, web, bestandsoverdracht en chatten"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Database"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL of MySQL database-server"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Programma's om de configuratie van uw computer te vergemakkelijken"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Geluid"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Hulpprogramma's"
-
-#
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentatie"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Commandoregel-gereedschappen"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix post-server, Inn nieuws-server"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet-station"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedia-station"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configuratie"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Meer grafische bureaubladen (GNOME, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Het K Desktop Environment, de basis-grafische omgeving met een verzameling "
-"van bijbehorende programma's"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafische omgeving"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Ontwikkeling"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Programma's om CD's mee te creëren en te branden"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kantoor Werkstation"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafische programma's zoals The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C and C++ ontwikkelingsbibliotheken, programma's en include-bestanden"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Netwerk-computer server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Post/Groupware/Nieuws"
-
-#
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Game-station"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video-afspeel- en bewerkingsprogramma's"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafisch"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Amusementsprogramma's: arcade, bordspellen, strategie etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Verzameling programma's om e-post en usenet nieuws mee te lezen en te "
-"schrijven, en om het Web mee door te bladeren"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivering, emulators, toezicht houden"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Persoonlijke Financiën"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Een grafische omgeving met gebruikersvriendelijke verzameling applicaties en "
-"bureaublad-programma's"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clients voor verschillende protcollen waaronder ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Geluids- en video-afspeel- en bewerkingsprogramma's"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Andere grafische bureaubladen"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editors, shells, bestandsbeheer, terminals"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programma's om uw financiën mee te beheren, zoals gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Spelletjes"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Persoonlijk Gegevensbeheer"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD branden"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Wetenschappelijk werkstation"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "kan /etc/sysconfig/autologin niet openen: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Wenst u het netwerk te herstarten?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Is dit goed?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Ik sta op het punt het netwerk apparaat te herstarten:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Ik ga het netwerk apparaat %s herstarten. Is dit goed?"
-
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Tenzij u specifiek iets anders nodig hebt, is de keuze meestal \"/dev/hda"
-#~ "\"\n"
-#~ "(de master-drive op het eerste IDE-kanaal) of \"/dev/sda\" (eerste SCSI "
-#~ "schijf)."
-
-#~ msgid ""
-#~ "The printing system which you are going to use (%s) needs basic \n"
-#~ "network functionality, but your network functionality is not\n"
-#~ "configured yet. If you go on without network configuration, your\n"
-#~ "printing system will set up a network only consisting of the \n"
-#~ "local machine which does not allow the usage of remote printers\n"
-#~ "or the sharing of a local printer with remote clients, but you\n"
-#~ "can set up local printers usable from your local machine. How do\n"
-#~ " you want to proceed?"
-#~ msgstr ""
-#~ "Het printsysteem dat u gaat gebruiken (%s) heeft basis-netwerk-\n"
-#~ "functionaliteit nodig, maar uw netwerkfunctionaliteit is nog niet \n"
-#~ "geconfigureerd. Wanneer u doorgaat zonder netwerkconfiguratie,\n"
-#~ "zal uw printsysteem een netwerk instellen dat alleen bestaat uit\n"
-#~ "deze machine, hetgeen het gebruik van printers op afstand uitsluit,\n"
-#~ "evenals het delen van een printer aan deze computer met clients \n"
-#~ "op afstand. U kunt desalniettemin printers aan deze computer \n"
-#~ "instellen om gebruikt te worden vanaf deze computer. Hoe wenst\n"
-#~ "u verder te gaan?"
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "De volgende printers zijn geconfigureerd. \n"
-#~ "U kan er bijvoegen of de bestaande wijzigen."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr ""
-#~ "Wachttijd voor verbinding (in seconden) [beta, niet geïmplementeerd]"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Kies uw gewenste taal voor installatie en systeemgebruik."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Kies uw toetsenbordlayout uit de bovenstaande lijst"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Als u andere talen (dan degene die u kiest bij het begin\n"
-#~ "van de installatie) beschikbaar wilt hebben na de installatie, kiest u "
-#~ "deze\n"
-#~ "a.u.b. in bovenstaande lijst. Als u alle talen wilt selecteren, kiest u \n"
-#~ "gewoon \"Alles\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Selecteer:\n"
-#~ "\n"
-#~ "  - Aangepast: Als u bekend bent met Linux. U zal het gebruik van het\n"
-#~ "systeem kunnen kiezen. Zie lager voor details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: Als u zich vlot een weg baant in GNU/Linux en een volledig "
-#~ "aan\n"
-#~ "    uw wensen aangepase installatie, is deze installatieklasse iets voor "
-#~ "u.\n"
-#~ "    Het zal volledig mogelijk zijn het gebruik van uw systeem te "
-#~ "installeren,\n"
-#~ "    zoals bij \"Aangepast\".\n"
-#~ "    Maar let op, alsjeblief, KIES DIT NIET TENZIJ U COMPLEET WEET WAT U "
-#~ "DOET!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "De verschillende keuzes voor het gebruik van uw machine (tenminste, "
-#~ "wanneer u\n"
-#~ "\"Aangepast\" of \"Expert\" gekozen heeft als installatieklasse) zijn de\n"
-#~ "volgende:\n"
-#~ "\n"
-#~ "  - Normaal: kies dit als u uw machine hoofdzakelijk zal gebruiken voor\n"
-#~ "    dagelijke gebruik (kantoorwerk, beeldbewerking, enz). Er zal geen\n"
-#~ "     enkele compiler, ontwikkelings-tool, etc. geinstalleerd worden.\n"
-#~ "\n"
-#~ "  - Ontwikkeling: zoals de naam zelf het zegt. Kies dit als u uw machine\n"
-#~ "    voor software-ontwikkeling wenst te gebruiken. U zal dan een "
-#~ "complete\n"
-#~ "    collectie software geinstalleerd hebben om de compilen, te debuggen,\n"
-#~ "    broncode op te maken, of softwarepakketten aan te maken.\n"
-#~ "\n"
-#~ "  - Server: kies dit als deze machine gebruikt zal worden als server "
-#~ "(ofwel\n"
-#~ "    een bestandsserver (NFS of SMB), een print server (Unix' lp (Line "
-#~ "Printer)\n"
-#~ "    protocol, of Windows-style SMB-printers, een authenticatieserver "
-#~ "(NIS),\n"
-#~ "    een database server, enzovoorts...\n"
-#~ "    Hier zal dan ook geen enkele gimmick (KDE, GNOME, ...) geinstalleerd\n"
-#~ "    worden."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "U kan nu de groepen pakketten selecteren die u wenst te installeren of\n"
-#~ "te upgraden.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX zal dan controleren of u genoeg ruimte heeft om ze allemaal te "
-#~ "installeren.\n"
-#~ "Als dit niet zo is, zal u een waarschuwing krijgen. Als u toch wil "
-#~ "verdergaan,\n"
-#~ "zal DrakX verdergaan, maar de minder interessante pakketten niet "
-#~ "installeren.\n"
-#~ "Onderaan de lijst kan u de optie \"Individuele pakketselectie\" "
-#~ "selecteren,\n"
-#~ "dan moet u door meer dan 1000 pakketten navigeren..."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Als u alle CDs in de lijst hierboven heeft, klik dan Ok. Als u geen\n"
-#~ "enkele van die CDs heeft, klik dan Annuleren. Als maar enkele CDs zoek\n"
-#~ "zijn, deselecteer ze dan, en klik Ok."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Er is geen modem gevonden. Kiest u a.u.b. de serieële poort waarop het "
-#~ "modem/naangesloten is.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ter informatie: de eerste serieële poort (genaamd \"COM1\" onder MS "
-#~ "Windows)\n"
-#~ "heet \"ttysS0\" onder Linux."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Als uw modem een extern modem is, zet deze dan u aan om DrakX deze "
-#~ "automatischte laten detecteren."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Zet a.u.b. uw modem aan en kies de juiste."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "U kan nu de inbel-opties ingeven. Als u niet zeker bent wat u hier moet\n"
-#~ "invoeren, kan u de correcte informatie aanvragen bij uw ISP."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Hier dient u het volgende in te voeren:\n"
-#~ "\n"
-#~ "  - IP-adres: als u het niet kent, vraag het aan uw netwerkbeheerder.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Netmasker: \"255.255.255.0\" is meestal een goede keuze. Als u niet\n"
-#~ "zeker bent, vraag het aan uw netwerkbeheerder.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Automatisch IP: Als uw netwerk BootP of DHCP gebruikt, selecteer\n"
-#~ "dan deze optie. Als dit geselecteerd is, is er geen invoer nodig in het\n"
-#~ "veld \"IP-adres\". Als u niet zeker bent, vraag het aan uw "
-#~ "netwerkbeheerder."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Als uw netwerk NIS gebruikt, selecteer dan \"NIS Gebruiken\". Als u het "
-#~ "niet\n"
-#~ "zeker weet, vraag het dan aan uw netwerkbeheerder."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "U kunt nu uw host naam ingeven. Als u deze niet kent,\n"
-#~ "of als u niet weet wat u moet invoeren, laat u dit\n"
-#~ "veld leeg"
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "U kan nu de inbel-opties ingeven. Als u niet zeker bent wat u hier moet\n"
-#~ "invoeren, kan u de correcte informatie aanvragen bij uw ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Als u proxies zal gebruiken, configureert u ze best nu. Als u niet weet "
-#~ "of\n"
-#~ "u proxies zal gebruiken, kan u dit best vragen aan uw netwerkbeheerder of "
-#~ "aan uw ISP."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "U kan cryptografische pakketten installeren als uw internetverbinding\n"
-#~ "correct ingesteld is. Eerst kiest u een \"mirror\" waar u de pakketten\n"
-#~ "wenst te downloaden en daarna selecteert u de pakketten om te "
-#~ "installeren.\n"
-#~ "\n"
-#~ "Opmerking: U moet de \"mirror\" en de pakketten selecteren naargelang uw\n"
-#~ "plaatselijke wetgeving."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "U kunt nu uw tijdzone selecteren van de plaats waar u woont."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "U kunt een locale printer (aangesloten op uw computer) of een netwerk\n"
-#~ "printer (aan te sturen via een Unix, Netware of MS Windows netwerk)\n"
-#~ "configureren."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Als u in staat wilt zijn te kunnen printen, kiest u a.u.b. een "
-#~ "printsysteem\n"
-#~ "tussen CUPS en LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is een nieuw, krachtig en flexibel printsysteem voor Unix systemen "
-#~ "(CUPS\n"
-#~ "betekent \"Common Unix Printing System\"). Het is het standaard "
-#~ "printsysteem in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is het oude printsysteem dat gebruikt wordt in vroegere Mandrake "
-#~ "Linux distributies.\n"
-#~ "\n"
-#~ "\n"
-#~ "Als u geen printer heeft, klikt u op \"Geen\"."
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Uw printer werd niet gedetecteerd. Voer a.u.b. de naam in van het "
-#~ "apparaat\n"
-#~ "waar het op is aangesloten.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ter informatie, de meeste printers zijn op de eerste paralelle poort\n"
-#~ "aangesloten.\n"
-#~ "Deze heet onder Linux \"/ev/lp0\" en \"LPT1\" onder MS Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "U moet nu uw printer in bovenstaande lijst selecteren."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Selecteer a.u.b. de juiste opties die overeenkomen met uw printer.\n"
-#~ "Kijkt u a.u.b. in de documentatie als u niet weet wat u hier moet "
-#~ "kiezen.\n"
-#~ "\n"
-#~ "\n"
-#~ "U zult in de volgende stap de configuratie kunnen testen en deze "
-#~ "aanpassen\n"
-#~ "als het niet werkt zoals u dit wilt."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "U kan nu het root-wachtwoord ingeven voor uw Mandrake Linux-systeem.\n"
-#~ "Het wachtwoord moet twee maal ingevoerd worden om te verifiëren dat\n"
-#~ "de beide wachtwoord-ingaven identiek zijn.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is de beheerder van het systeem, en is de enige gebruiker die\n"
-#~ "de systeemconfiguratie kan wijzigen. Daarom moet u dit wachtwoord\n"
-#~ "met zorg uitkiezen! Ongemachtigd gebruik van de root-account kan\n"
-#~ "erg gevaarlijk zijn voor de integriteit van het systeem en zijn "
-#~ "gegevens,\n"
-#~ "en andere systemen die ermee verbonden zijn. Het wachtwoord moet een\n"
-#~ "mengeling zijn van alfanumerieke karakters en minstens 8 tekens lang "
-#~ "zijn.\n"
-#~ "Het mag *nooit* neergeschreven worden. Maak het wachtwoord echter ook "
-#~ "niet\n"
-#~ "te moeilijk, u moet het kunnen onthouden zonder veel moeite."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "U kan nu één of meer \"gewone\" gebruikers-accounts aanmaken (ten "
-#~ "aanzien\n"
-#~ "van de \"bevoorrechte\" account, root). U kan één of meer accounts aan-\n"
-#~ "maken voor elke persoon die u de computer wenst te laten gebruiken. Merk\n"
-#~ "op dat elke gebruikersaccount zijn eigen voorkeuren (grafische omgeving,\n"
-#~ "programma-instellingen, etc.) en zijn eigen \"home directory\" heeft, in\n"
-#~ "welke deze voorkeuren zullen worden opgeslagen.\n"
-#~ "\n"
-#~ "\n"
-#~ "Creëer eerst een account voor uzelf. Zelfs als u de enige gebruiker zal\n"
-#~ "zijn, mag u NIET verbinden als root voor het dagelijkse gebruik van het\n"
-#~ "systeem: dit is een zeer hoog veiligheidsrisico. U kan hierdoor ook met\n"
-#~ "een simpele typfout het gehele systeem onbruikbaar maken.\n"
-#~ "\n"
-#~ "\n"
-#~ "Daarom moet u steeds verbinden met de gebruikersaccount die u hier hebt\n"
-#~ "aangemaakt, en enkel als root inloggen voor administratie en onderhoud."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Een opstart diskette wordt sterkt aanbevolen. Als u uw\n"
-#~ "computer niet kunt opstarten, is dit de enige manier om de computer te\n"
-#~ "`redden' zonder Linux opnieuw te hoeven installeren."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "LILO (de LInux LOader) en Grub zijn bootloaders: ze kunnen Linux of "
-#~ "eender\n"
-#~ "welk ander besturingssysteem opstarten op uw computer.\n"
-#~ "Normaalgezien worden deze besturingssystemen correct gedetecteerd en\n"
-#~ "geinstalleerd. Als dit niet het geval is, kan u handmatig een ingang "
-#~ "toevoegen\n"
-#~ "op dit scherm. Wees voorzichtig bij het kiezen van de juiste opties.\n"
-#~ "\n"
-#~ "\n"
-#~ "U wil ook misschien niet iedereen toegang geven tot die "
-#~ "besturingssystemen,\n"
-#~ "dan kan u de overeenkomstige ingangen verwijderen. Maar, in dit geval,\n"
-#~ "zal u wel een bootdisk nodig hebben om ze nog te kunnen opstarten!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "LILO en grub hoofdopties zijn:\n"
-#~ "  - Boot device: Selecteert de naam van het apparaat (= harde schijf-\n"
-#~ "partitie) die de bootsector bevat. Tenzij u specifiek iets anders nodig\n"
-#~ "heeft, kies \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Wachttijd voor het booten van standaard-image: Geeft het nummer in \n"
-#~ "tienden van een seconde voor de bootloader het standaard-image opstart.\n"
-#~ "Dit is handig op systemsn die rechtstreeks van de harde schijf starten \n"
-#~ "na het inschakelen van het keyboard. De bootloader wacht niet als \"delay"
-#~ "\"\n"
-#~ "niet aanwezig is of op 0 gezet is.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Videomodus: Dit geeft de VGA tekstmodus aan die geselecteerd moet "
-#~ "worden\n"
-#~ "bij het booten. De volgende waarden zijn mogelijk:\n"
-#~ "    * normal: selecteerd normale 80x25 tekstmodus\n"
-#~ "    * <nummer>: gebruikt de overeenkomstige tekstmodus."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Nu is het tijd om het X-Window-System te configureren. Dit is de kern\n"
-#~ "van de Linux GUI (Grafische Gebruikers-Interface). Hiervoor dient u uw\n"
-#~ "grafische kaart en monitor in te stellen. De meeste stappen zijn "
-#~ "automatisch\n"
-#~ "maar uw werk zal eruit bestaan te controleren wat er is gebeurd en of "
-#~ "dit\n"
-#~ "volledig correct is, en de instellingen te accepteren :-)\n"
-#~ "\n"
-#~ "\n"
-#~ "Wanneer de configuratie klaar is, zal X gestart worden (tenzij u DrakX\n"
-#~ "vraagt dit niet te doen) zodat u de instellingen kan controleren en zien "
-#~ "of\n"
-#~ "u het ermee eens bent. Als dit niet het geval is, kan u altijd "
-#~ "terugkomen\n"
-#~ "om deze instellingen aan te passen, zoveel keer als u wenst."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Als er iets verkeerd zit in de X-configuratie, gebruik dan deze opties "
-#~ "om\n"
-#~ "het X-Window Systeem correct te configureren."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Als u liefst een grafische inlogprocedure heeft, kies dan \"Ja\". Anders\n"
-#~ "kiest u \"Nee\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Uw systeem wordt nu herstart.\n"
-#~ "\n"
-#~ "Na het herstarten, zal uw nieuw Mandrake Linux-systeem automatisch "
-#~ "laden.\n"
-#~ "Als u wil starten met een ander bestaand besturingssysteem, gelieve dan "
-#~ "de\n"
-#~ "bijkomende instructies te lezen."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "/etc/fstab schrijven"
-
-#~ msgid "Restore from file"
-#~ msgstr "Herstellen vanuit bestand"
-
-#~ msgid "Save in file"
-#~ msgstr "Schrijven naar bestand"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Herstellen van floppy"
-
-#~ msgid "Format all"
-#~ msgstr "Alles formatteren"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Nadat alle partities geformatteerd zijn,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "zullen alle gegevens op deze partities verloren zijn gegaan."
-
-#~ msgid "Reload"
-#~ msgstr "Herladen"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Wilt u een auto installatie diskette voor Linux replicatie?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL Configuratie"
-
-#~ msgid "Remote queue"
-#~ msgstr "Wachtrij op afstand:"
-
-#~ msgid "Europe"
-#~ msgstr "Europa"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "Wachtrij verwijderen:"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "De inhoud v/h Config bestand kon niet worden geïnterpreteerd."
-
-#~ msgid "Disable network"
-#~ msgstr "Networking uitschakelen"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "U kunt nu uw muis testen. Gebruik de knoppen en het wiel om\n"
-#~ "te controleren of de instellingen correct zijn. Als dit niet zo is, kunt "
-#~ "u\n"
-#~ "op \"Annuleren\" klikken om een andere driver te kiezen."
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "U kunt de URI invoeren om de printer met CUPS te benaderen"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Ja, print een ASCII testpagina"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Ja, print een PostScript testpagina"
-
-#~ msgid "Paper Size"
-#~ msgstr "Papiergrootte"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Pagina uitwerpen na job?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint stuurprogramma-opties"
-
-#~ msgid "Color depth options"
-#~ msgstr "Kleurdiepte-opties"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Text afdrukken als PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Getrapte tekst repareren?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Aantal pagina's per uitvoerpagina's"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Linker/Rechtermarges in punten (1/72 inch)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Boven/Ondermarges in punten (1/72 inch)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Extra GhostScript opties"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Extra tekst-opties"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Pagina-volgorde omdraaien"
-
-#~ msgid "CUPS starting"
-#~ msgstr "Bezig met starten van CUPS"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Selecteer Netwerk Printerverbinding"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Elke printer heeft een naam nodig (bijv. lp).\n"
-#~ "Andere parameters zoals de beschrijving van de printer en zijn locatie\n"
-#~ "kunnen aangegeven worden. Welke naam moet voor deze printer gebruikt "
-#~ "worden\n"
-#~ "en hoe is de printer aangesloten?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Elke wachtrij (waar printjobs naar gestuurd worden) heeft een\n"
-#~ "naam (vaak lp) nodig en een spool-directory. Welke naam en \n"
-#~ "directory moeten gebruikt worden voor deze wachtrij, en hoe is de printer "
-#~ "verbonden?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Naam van de wachtrij:"
-
-#~ msgid "Spool directory"
-#~ msgstr "Spool-directory:"
-
-#~ msgid "Disable"
-#~ msgstr "Uitschakelen"
-
-#~ msgid "Enable"
-#~ msgstr "Inschakelen"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Om een veiliger systeem in te stellen, selecteert u best \"Schaduw-"
-#~ "bestand gebruiken\" en \"MD5-wachtwoorden gebruiken\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Als uw netwerk NIS gebruikt, selecteer dan \"NIS Gebruiken\". Als u het "
-#~ "niet\n"
-#~ "zeker weet, vraag het dan aan uw netwerkbeheerder."
-
-#~ msgid "yellow pages"
-#~ msgstr "Gouden Gids"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1 van uw provider"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2 van uw provider"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Hoe wenst u verbindingte maken met het Internet?"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Dit opstartscript probeert modules te laden voor uw USB-muis."
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Nu uw Internet connectie geconfigureerd is,\n"
-#~ "kan uw computer geconfigureerd worden om zijn Internet connectie\n"
-#~ "te delen. Opmerking: u heeft een Netwerk Adapter nodig om een Local Area\n"
-#~ "op te zetten.\n"
-#~ "\n"
-#~ "Wilt u Internet Connectie Delen nu instellen?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Automatische afhankelijkheden"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "LILO/GRUB Configureren"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Boot-diskette aanmaken"
-
-#~ msgid "Format floppy"
-#~ msgstr "Diskette formatteren"
-
-#~ msgid "Choice"
-#~ msgstr "Keuze"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "U kan nu enkele andere opties voor uw systeem kiezen.\n"
-#~ "\n"
-#~ "  - Harde schijfoptimalisatie gebruiken: deze optie kan de toegangstijd "
-#~ "tot\n"
-#~ "    de harde schijf verbeteren maar is enkel voor geavanceerde "
-#~ "gebruikers\n"
-#~ "    bestemd, slechte chipsets kunnen uw gegevens vernietigen, dus let "
-#~ "op.\n"
-#~ "    Merk op dat de kernel een ingebouwde 'blacklist' heeft van drives en "
-#~ "chipsets,\n"
-#~ "    maar als u niet voor kwade verrassingen wil komen te staan, laat deze "
-#~ "optie\n"
-#~ "    dan uit.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Kies beveiligingsniveau: U kan een beveiligingsniveau kiezen voor uw\n"
-#~ "systeem.\n"
-#~ "    Gelieve de handleiding te consulteren voor meer informatie.\n"
-#~ "    Algemeen: als u het niet weet, kies dan \"Medium\"; als u een echt "
-#~ "beveiligde\n"
-#~ "    machine wil hebben, kies dan \"Paranoid\", maar let op: OP DIT NIVEAU "
-#~ "KAN\n"
-#~ "    ER GEEN ROOT-LOGINPLAATS VINDEN OP DE CONSOLE! Als u root wenst te "
-#~ "zijn,\n"
-#~ "    moet u als een gebruiker in loggen en dan \"su\" gebruiken. Met "
-#~ "andere\n"
-#~ "    woorden: verwacht niet uw machine voor iets anders dan een server te "
-#~ "gebruiken.\n"
-#~ "    u bent gewaarschuwd.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Juiste RAM-grootte (indien nodig): Spijtig genoeg, in de huidige PC-"
-#~ "wereld\n"
-#~ "    is er geen waterdichte manier om aan het BIOS te vragen hoeveel RAM "
-#~ "er in\n"
-#~ "    de machine aanwezig is. Daarom is het mogelijk dat Linux de "
-#~ "hoeveelheid\n"
-#~ "    RAM-geheugen in uw machine niet correct kan detecteren. In dit geval, "
-#~ "kan u\n"
-#~ "    hier de juiste hoeveelheid invoeren.\n"
-#~ "    PS: een verschil van 2 of 4 MB is normaal.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Automatische koppeling van verwijderbare media: Als u liever de\n"
-#~ "    verwijderbare media (CD-ROM, ZIP, Floppy) niet zelf koppelt door "
-#~ "\"mount\"\n"
-#~ "    en \"umount\" te typen, kies dan deze optie.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Num Lock inschakelen bij het opstarten: Als u Num Lock aan wilt "
-#~ "hebben\n"
-#~ "    na het opstarten, kies dan deze optie (Noot: Num Lock zal misschien "
-#~ "nog\n"
-#~ "    steeds niet werken onder X)."
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Overige"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Overige vragen"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Kan supermount niet gebruiken in hoog veiligheidsniveau"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "let goed op: OP DIT LEVEL VAN VEILIGHEID, IS ROOT LOGIN OP HET CONSOLE\n"
-#~ "NIET TOEGESTAAN! Als u root wilt zijn, moet u als een gebruiker "
-#~ "inloggen,\n"
-#~ "en dan \"su\" gebruiken. Algemener, verwacht niet uw computer voor iets\n"
-#~ "anders te gebruiken dan als server.\n"
-#~ "U bent gewaarschuwd."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Let op, als u numlock aan heeft, worden veel toetsaanhalen als\n"
-#~ "cijfers in plaats van normale letters weergegeven (bijv: `p' => `6')"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Eerste DNS-server"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Tweede DNS-server"
-
-#~ msgid "using module"
-#~ msgstr "gebruikt module"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Welke bootloader wenst u te gebruiken?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Auto-installatiediskette"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Proberen een modem te vinden?"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Netwerk-configuratie"
-
-#~ msgid "Configure local network"
-#~ msgstr "Configureer locaal netwerk"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Configureer de Internet connectie / Configureer locaal netwerk"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Het locale netwerk is reeds geconfigureerd.\n"
-#~ "Wilt u:"
-
-#~ msgid "Multimedia"
-#~ msgstr "Multimedia"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Internet Tools"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Ontwikkeling - C/C++"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Tijdszone configureren"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(kan gegevenscorruptie veroorzaken)"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "Harde schijf-optimalisatie gebruiken?"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Numlock inschakelen bij het opstarten"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Bevestig Wachtwoord"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Waar wordt uw systeem voor gebruikt?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Selecteer de grootte die u wenst te installeren"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Gebruik diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "Aangepast"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Bent u zeker dat u een expert bent?\n"
-#~ "U zal krachtigere dingen kunnen doen, maar ook gevaarlijkere!\n"
-#~ "U zult vragen gesteld krijgen als: ``Schaduw bestand gebruiken voor "
-#~ "wachtwoorden?'',\n"
-#~ "bent u er klaar voor zulke vragen te beantwoorden?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Schaduw-bestand gebruiken"
-
-#~ msgid "shadow"
-#~ msgstr "schaduw"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "MD5-wachtwoorden gebruiken"
-
-#~ msgid "Search"
-#~ msgstr "Zoek"
-
-#~ msgid "Package"
-#~ msgstr "Pakket"
-
-#~ msgid "Text"
-#~ msgstr "Tekst"
-
-#~ msgid "Tree"
-#~ msgstr "Boom"
-
-#~ msgid "Sort by"
-#~ msgstr "Sorteren volgens"
-
-#~ msgid "Category"
-#~ msgstr "Categorie"
-
-#~ msgid "See"
-#~ msgstr "Zien"
-
-#~ msgid "Installed packages"
-#~ msgstr "Geïnstalleerde pakketten"
-
-#~ msgid "Available packages"
-#~ msgstr "Beschikbare pakketten"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Toon enkel leaves"
-
-#~ msgid "Expand all"
-#~ msgstr "Alles uitbreiden"
-
-#~ msgid "Collapse all"
-#~ msgstr "Alles inklappen"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Plaats van pakketten toevoegen"
-
-#~ msgid "Update location"
-#~ msgstr "Plaats bijwerken"
-
-#~ msgid "Find Package"
-#~ msgstr "Zoek Pakket"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Zoek pakketten die bestand bevatten"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Wissel tussen geïnstalleerd en beschikbaar"
-
-#~ msgid "Choose package to install"
-#~ msgstr "Selecteer pakket voor installatie"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Afhankelijkheden aan het controleren"
-
-#~ msgid "Wait"
-#~ msgstr "Wachten"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "De volgende pakketten kunnen zullen gedeïnstalleerd worden"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "Bezig met deïnstalleren van de RPMs"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Welk pakket zoekt u"
-
-#~ msgid "%s not found"
-#~ msgstr "%s niet gevonden."
-
-#~ msgid "No match"
-#~ msgstr "Niets gevonden"
-
-#~ msgid "No more match"
-#~ msgstr "Niets meer gevonden"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake zit in ``laag geheugen'' modus.\n"
-#~ "Ik ga rpmdrake heropstarten om het zoeken mogelijk te maken."
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Welk bestand zoekt u?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Wat zoekt u?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Geef een naam (vb: `extra', `commercieel')"
-
-#~ msgid "Directory"
-#~ msgstr "Directory"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Geen CD-Rom beschikbaar (niets in /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL van de directory met de RPMs"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Voor FTP en HTTP moet u de plaats van hdlist geven\n"
-#~ "Deze moet relatief zijn aan de bovenstaande URL"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Gelieve de volgende informatie op te sturen"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s is reeds in gebruik"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Bezig met updaten van de RPM-basis"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Ik ga %s verwijderen"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Bezig met zoeken naar leaves"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Leaves zoeken vraagt wat tijd"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Ik heb een ISDN kaart gevonden:\n"
-
-#~ msgid "France"
-#~ msgstr "Frankrijk"
-
-#~ msgid "Other countries"
-#~ msgstr "Andere landen"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "In welk land bent u nu?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Alcatel modem"
-
-#~ msgid "ECI modem"
-#~ msgstr "ECI modem"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "Als uw adsl modem een Alcatel is, kiest u Alcatel. Anders kiest u ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "gebruik geen pppoe"
-
-#~ msgid "mandatory"
-#~ msgstr "verplicht"
-
-#~ msgid "interesting"
-#~ msgstr "interessant"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (belangrijk)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (heel leuk)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (leuk)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Met welke seriële poort is uw muis verbonden?"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid "Czech"
-#~ msgstr "Tsjechisch"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovaaks"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "Kon ipchains RPM niet met urpmi installeren."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "Kon dhcp RPM niet met urpmi installeren."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "Kon Linuxconf RPM niet met urpmi installeren"
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "Kon bind RPM niet met urpmi installeren."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "Kon caching-nameserver RPM niet met urpmi installeren."
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Locale netwerk nu herconfigureren"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Uw computer kan worden geconfigureerd om zijn Internet connectie te.\n"
-#~ "delen\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "Alles is geconfigureerd.\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Verbinden met het Internet met een normaal modem"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Verbinden met het Internet met een ISDN modem"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Verbinden met het Internet met DSL (of ADSL)"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Verbindig maken met Internet via de Kabel"
diff --git a/perl-install/share/po/no.po b/perl-install/share/po/no.po
deleted file mode 100644
index be739066c..000000000
--- a/perl-install/share/po/no.po
+++ /dev/null
@@ -1,10225 +0,0 @@
-# KTranslator Generated File
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# Terje Bjerkelia <terje@bjerkelia.com>, 1999-2000
-# Andreas Bergstrøm <abergstr@halden.net>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-11-19 18:34+0100\n"
-"PO-Revision-Date: 2001-09-21 10:22+0200\n"
-"Last-Translator: Andreas Bergstrøm <abergstr@halden.net>\n"
-"Language-Team: Norsk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Konfigurere all hoder uavhengig"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Bruk Xinerama utvidelse"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigurer bare kort \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Multi-hode konfigurasjon"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Systemet ditt støtter konfigurasjon for flere hoder.\n"
-"Hva ønsker du å gjøre?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Grafikk-kort"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Velg et grafikk-kort"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Velg en X-tjener"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X-tjener"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Hvilken konfigurasjon av XFree vil du ha?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Kortet ditt kan ha støtte for maskinvare 3D akselerasjon, men bare med XFree "
-"%s.\n"
-"Kortet ditt er støttet av XFree %s som kan ha bedre støtte i 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Kortet ditt kan ha støtte for maskinvare 3D akselerasjon med XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s med maskinvare 3D akselerasjon"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Kortet ditt kan ha støtte for maskinvare 3D akselerasjon med XFree %s,\n"
-"MERK AT DETTE ER EKSPERIMENTELL STØTTE OG KAN 'FRYSE' MASKINEN DIN."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s med EKSPERIMENTELL maskinvare 3D akselerasjon"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Kortet ditt kan ha støtte for maskinvare 3D akselerasjon, men bare med XFree "
-"%s,\n"
-"MERK AT DETTE ER EKSPERIMENTELL STØTTE OG KAN 'FRYSE' MASKINEN DIN.\n"
-"Kortet ditt er støttet av XFree %s som kan ha bedre støtte i 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installasjons skjermdriver)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree konfigurasjon"
-
-#: ../../Xconfigurator.pm_.c:439
-msgid "Select the memory size of your graphic card"
-msgstr "Velg minnestørrelsen til grafikk-kortet ditt"
-
-#: ../../Xconfigurator.pm_.c:497
-msgid "Choose options for server"
-msgstr "Velg opsjoner for tjener"
-
-#: ../../Xconfigurator.pm_.c:521
-msgid "Choose a monitor"
-msgstr "Velg en monitor"
-
-#: ../../Xconfigurator.pm_.c:521
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:524
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"De to kritiske parametrene er den vertikale oppfrisknings-raten, som er "
-"raten\n"
-"som som oppfrisker hele skjermen, og mest viktig den horisontale \n"
-"sync-raten, som er raten som scanlinjer blir vist på.\n"
-"\n"
-"Det et VELDIG VIKTIG at du ikke spesifiserer en monitor-type med et sync- "
-"område\n"
-"som er utenfor det monitoren din er i stand til å klare: Du kan skade "
-"skjermen din.\n"
-"Hvis du er usikker, velg en konservativ innstilling."
-
-#: ../../Xconfigurator.pm_.c:531
-msgid "Horizontal refresh rate"
-msgstr "Horisontal oppfrisknings-rate"
-
-#: ../../Xconfigurator.pm_.c:532
-msgid "Vertical refresh rate"
-msgstr "Vertikal oppfrisknings-rate"
-
-#: ../../Xconfigurator.pm_.c:569
-msgid "Monitor not configured"
-msgstr "Monitor er ikke konfigurert"
-
-#: ../../Xconfigurator.pm_.c:572
-msgid "Graphic card not configured yet"
-msgstr "Grafikk-kort er ikke konfigurert ennå"
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Resolutions not chosen yet"
-msgstr "Oppløsninger er ikke valgt ennå"
-
-#: ../../Xconfigurator.pm_.c:593
-msgid "Do you want to test the configuration?"
-msgstr "Vil du teste konfigurasjonen?"
-
-#: ../../Xconfigurator.pm_.c:597
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Advarsel: testing av dette grafikk-kortet kan `fryse' maskinen din"
-
-#: ../../Xconfigurator.pm_.c:600
-msgid "Test of the configuration"
-msgstr "Test konfigurasjon"
-
-#: ../../Xconfigurator.pm_.c:638 ../../Xconfigurator.pm_.c:650
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"prøv å endre noen parametere"
-
-#: ../../Xconfigurator.pm_.c:638 ../../Xconfigurator.pm_.c:650
-msgid "An error has occurred:"
-msgstr "En feil oppsto:"
-
-#: ../../Xconfigurator.pm_.c:674
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Slutter om %d sekunder"
-
-#: ../../Xconfigurator.pm_.c:685
-msgid "Is this the correct setting?"
-msgstr "Er dette den riktige innstillingen?"
-
-#: ../../Xconfigurator.pm_.c:694
-msgid "An error has occurred, try to change some parameters"
-msgstr "En feil oppsto, prøv å endre noen parametere"
-
-#: ../../Xconfigurator.pm_.c:765
-msgid "Resolution"
-msgstr "Oppløsning"
-
-#: ../../Xconfigurator.pm_.c:816
-msgid "Choose the resolution and the color depth"
-msgstr "Velg oppløsning og fargedybde"
-
-#: ../../Xconfigurator.pm_.c:818
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafikk-kort: %s"
-
-#: ../../Xconfigurator.pm_.c:819
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86-tjener: %s"
-
-#: ../../Xconfigurator.pm_.c:835 ../../printerdrake.pm_.c:1918
-#: ../../standalone/draknet_.c:301 ../../standalone/draknet_.c:304
-msgid "Expert Mode"
-msgstr "Ekspertmodus"
-
-#: ../../Xconfigurator.pm_.c:836
-msgid "Show all"
-msgstr "Vis alle"
-
-#: ../../Xconfigurator.pm_.c:881
-msgid "Resolutions"
-msgstr "Oppløsninger"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastatur-oppsett: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Type mus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Enhet mus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1446
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor HorizSync: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor VertRefresh: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafikk-kort: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1449
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafikk-kort: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Minne grafikk: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1452
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Fargedybde: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1453
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Oppløsning: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1455
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86-tjener: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1456
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 driver: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1474
-msgid "Preparing X-Window configuration"
-msgstr "Forbereder X-Window konfigurasjon"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "What do you want to do?"
-msgstr "Hva ønsker du å gjøre?"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Change Monitor"
-msgstr "Endre monitor"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Change Graphic card"
-msgstr "Endre grafikk-kort"
-
-#: ../../Xconfigurator.pm_.c:1502
-msgid "Change Server options"
-msgstr "Endre opsjoner for tjener"
-
-#: ../../Xconfigurator.pm_.c:1503
-msgid "Change Resolution"
-msgstr "Endre oppløsning"
-
-#: ../../Xconfigurator.pm_.c:1504
-msgid "Show information"
-msgstr "Vis informasjon"
-
-#: ../../Xconfigurator.pm_.c:1505
-msgid "Test again"
-msgstr "Test igjen"
-
-#: ../../Xconfigurator.pm_.c:1506 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Avslutt"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Behold endringene?\n"
-"Nåværende konfigurasjon er:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1537
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Vennligst logg inn i %s på nytt for å aktivere endringene"
-
-#: ../../Xconfigurator.pm_.c:1557
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Vennligst logg ut og bruk så Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1560
-msgid "X at startup"
-msgstr "X ved oppstart"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Jeg kan sette opp maskinen din til å automatisk starte X ved oppstart.\n"
-"Vil du at X skal starte når du starter maskinen på nytt?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 farger (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tusen farger (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tusen farger (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 millioner farger (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milliarder farger (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB eller mer"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 ved 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA 800x600 ved 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibel, 1024x768 ved 87 Hz interlaced (ikke 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ved 87 Hz interlaced, 800x600 ved 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Utvidet Super VGA, 800x600 ved 60 Hz, 640x480 ved 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Ikke-interlaced SVGA, 1024x768 ved 60 Hz, 800x600 ved 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Høyfrekvens SVGA, 1024x768 ved 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Flerfrekvens som kan klare 1280x1024 ved 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Flerfrekvens som kan klare 1280x1024 ved 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Flerfrekvens som kan klare 1280x1024 ved 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor som kan klare 1600x1200 ved 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor som kan klare 1600x1200 ved 76 Hz"
-
-#: ../../any.pm_.c:104 ../../any.pm_.c:129
-msgid "First sector of boot partition"
-msgstr "Første sektor av oppstartspartisjon"
-
-#: ../../any.pm_.c:104 ../../any.pm_.c:129 ../../any.pm_.c:202
-msgid "First sector of drive (MBR)"
-msgstr "Første sektor av disk (MBR)"
-
-#: ../../any.pm_.c:108
-msgid "SILO Installation"
-msgstr "SILO-installasjon"
-
-#: ../../any.pm_.c:109 ../../any.pm_.c:122
-msgid "Where do you want to install the bootloader?"
-msgstr "Hvor ønsker du installere oppstartslasteren?"
-
-#: ../../any.pm_.c:121
-msgid "LILO/grub Installation"
-msgstr "LILO/grub-installasjon"
-
-#: ../../any.pm_.c:133 ../../any.pm_.c:147
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:135
-msgid "LILO with text menu"
-msgstr "LILO med tekstmeny"
-
-#: ../../any.pm_.c:136 ../../any.pm_.c:147
-msgid "LILO with graphical menu"
-msgstr "LILO med grafisk meny"
-
-#: ../../any.pm_.c:139
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:143
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Start fra DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:147
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:185
-msgid "Bootloader main options"
-msgstr "Hovedopsjoner for oppstartslaster"
-
-#: ../../any.pm_.c:154 ../../any.pm_.c:186
-msgid "Bootloader to use"
-msgstr "Oppstartslaster som skal brukes"
-
-#: ../../any.pm_.c:156
-msgid "Bootloader installation"
-msgstr "Installasjon oppstartslaster"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:188
-msgid "Boot device"
-msgstr "Oppstartsenhet"
-
-#: ../../any.pm_.c:159
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (virker ikke på gamle BIOS'er)"
-
-#: ../../any.pm_.c:160
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:160
-msgid "compact"
-msgstr "kompakt"
-
-#: ../../any.pm_.c:161 ../../any.pm_.c:260
-msgid "Video mode"
-msgstr "Skjermmodus"
-
-#: ../../any.pm_.c:163
-msgid "Delay before booting default image"
-msgstr "Forsinkelse før oppstart av standard bilde"
-
-#: ../../any.pm_.c:165 ../../any.pm_.c:743
-#: ../../install_steps_interactive.pm_.c:1011 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:418 ../../printerdrake.pm_.c:497
-#: ../../standalone/draknet_.c:620
-msgid "Password"
-msgstr "Passord"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:744
-#: ../../install_steps_interactive.pm_.c:1012
-msgid "Password (again)"
-msgstr "Passord (igjen)"
-
-#: ../../any.pm_.c:167
-msgid "Restrict command line options"
-msgstr "Begrense kommandolinje-opsjoner"
-
-#: ../../any.pm_.c:167
-msgid "restrict"
-msgstr "begrense"
-
-#: ../../any.pm_.c:169
-msgid "Clean /tmp at each boot"
-msgstr "Tøm /tmp ved hver oppstart"
-
-#: ../../any.pm_.c:170
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Presiser RAM-størrelse hvis det trengs (funnet %d MB)"
-
-#: ../../any.pm_.c:172
-msgid "Enable multi profiles"
-msgstr "Slå på multiprofiler"
-
-#: ../../any.pm_.c:176
-msgid "Give the ram size in MB"
-msgstr "Oppgi ram-størrelsen i MB"
-
-#: ../../any.pm_.c:178
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Opsjon ``Begrense kommandolinje-opsjoner'' kan ikke brukes uten et passord"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:720
-#: ../../install_steps_interactive.pm_.c:1006
-msgid "Please try again"
-msgstr "Vennligst prøv igjen"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:720
-#: ../../install_steps_interactive.pm_.c:1006
-msgid "The passwords do not match"
-msgstr "Passordene stemmer ikke overens"
-
-#: ../../any.pm_.c:187
-msgid "Init Message"
-msgstr "Initmelding"
-
-#: ../../any.pm_.c:189
-msgid "Open Firmware Delay"
-msgstr "Åpne firmwareforsinkelse"
-
-#: ../../any.pm_.c:190
-msgid "Kernel Boot Timeout"
-msgstr "Kernel Boot Timeout"
-
-#: ../../any.pm_.c:191
-msgid "Enable CD Boot?"
-msgstr "Skal det være mulig å boote fra CD?"
-
-#: ../../any.pm_.c:192
-msgid "Enable OF Boot?"
-msgstr "Skal det være mulig å boote fra OF?"
-
-#: ../../any.pm_.c:193
-msgid "Default OS?"
-msgstr "Standard operativsystem?"
-
-#: ../../any.pm_.c:217
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Her er de forskjellige oppføringene.\n"
-"Du kan legge til flere eller endre de eksisterende."
-
-#: ../../any.pm_.c:227
-msgid "Add"
-msgstr "Legg til"
-
-#: ../../any.pm_.c:227 ../../any.pm_.c:731 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1879
-#: ../../printerdrake.pm_.c:1880 ../../printerdrake.pm_.c:1937
-#: ../../printerdrake.pm_.c:1981
-msgid "Done"
-msgstr "Ferdig"
-
-#: ../../any.pm_.c:227
-msgid "Modify"
-msgstr "Modifiser"
-
-#: ../../any.pm_.c:235
-msgid "Which type of entry do you want to add?"
-msgstr "Hvilken inngangstype vil du legge til"
-
-#: ../../any.pm_.c:236
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:236
-msgid "Other OS (SunOS...)"
-msgstr "Andre OS (SunOS...)"
-
-#: ../../any.pm_.c:237
-msgid "Other OS (MacOS...)"
-msgstr "Andre OS (MacOS...)"
-
-#: ../../any.pm_.c:237
-msgid "Other OS (windows...)"
-msgstr "Andre OS (windows...)"
-
-#: ../../any.pm_.c:256
-msgid "Image"
-msgstr "Bilde"
-
-#: ../../any.pm_.c:257 ../../any.pm_.c:268
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:258 ../../any.pm_.c:287
-msgid "Append"
-msgstr "Tilføye"
-
-#: ../../any.pm_.c:262
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:263
-msgid "Read-write"
-msgstr "Les-skriv"
-
-#: ../../any.pm_.c:270
-msgid "Table"
-msgstr "Tabell"
-
-#: ../../any.pm_.c:271
-msgid "Unsafe"
-msgstr "Usikker"
-
-#: ../../any.pm_.c:278 ../../any.pm_.c:283 ../../any.pm_.c:286
-msgid "Label"
-msgstr "Etikett"
-
-#: ../../any.pm_.c:280 ../../any.pm_.c:291
-msgid "Default"
-msgstr "Standard"
-
-#: ../../any.pm_.c:288
-msgid "Initrd-size"
-msgstr "Initrdstørrelse"
-
-#: ../../any.pm_.c:290
-msgid "NoVideo"
-msgstr "Ingen video"
-
-#: ../../any.pm_.c:298
-msgid "Remove entry"
-msgstr "Fjern inngang"
-
-#: ../../any.pm_.c:301
-msgid "Empty label not allowed"
-msgstr "Tom etikett er ikke tillatt"
-
-#: ../../any.pm_.c:302
-msgid "This label is already used"
-msgstr "Denne etiketten er allerede i bruk"
-
-#: ../../any.pm_.c:610
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Fant %s %s grensesnitt"
-
-#: ../../any.pm_.c:611
-msgid "Do you have another one?"
-msgstr "Har du enda ett?"
-
-#: ../../any.pm_.c:612
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Har du noen %s grensesnitt?"
-
-#: ../../any.pm_.c:614 ../../any.pm_.c:773 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:720
-msgid "No"
-msgstr "Nei"
-
-#: ../../any.pm_.c:614 ../../any.pm_.c:772 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:720
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:615
-msgid "See hardware info"
-msgstr "Se maskinvareinfo"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:650
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installerer driver for %s kort %s"
-
-#: ../../any.pm_.c:651
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:662
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hvilken %s driver skal jeg prøve?"
-
-#: ../../any.pm_.c:670
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"I noen tilfeller trenger %s driveren å ha ekstra informasjon for å virke\n"
-"ordentlig, selv om den normalt virker fint foruten. Ønsker du å spesifisere "
-"ekstra\n"
-"opsjoner for den eller tillate driveren å sondere maskinen din for\n"
-"informasjonen den trenger? Av og til vil sondering stoppe maskinen, men "
-"burde\n"
-"ikke forårsake noen skader."
-
-#: ../../any.pm_.c:675
-msgid "Autoprobe"
-msgstr "Automatisk sondering"
-
-#: ../../any.pm_.c:675
-msgid "Specify options"
-msgstr "Spesifiser opsjoner"
-
-#: ../../any.pm_.c:679
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Du kan nå gi dens opsjoner til modul %s."
-
-#: ../../any.pm_.c:685
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Du kan nå oppgi dens opsjoner for modul %s.\n"
-"Opsjonene er i format ``navn=verdi navn2=verdi2 ...''.\n"
-"F.eks., ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:688
-msgid "Module options:"
-msgstr "Modulopsjoner:"
-
-#: ../../any.pm_.c:699
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Lasting av modul %s feilet.\n"
-"Ønsker du å prøve igjen med andre parametere?"
-
-#: ../../any.pm_.c:717
-#, c-format
-msgid "(already added %s)"
-msgstr "(allerede lagt til %s)"
-
-#: ../../any.pm_.c:721
-msgid "This password is too simple"
-msgstr "Dette passordet er for enkelt"
-
-#: ../../any.pm_.c:722
-msgid "Please give a user name"
-msgstr "Vennligst oppgi et brukernavn"
-
-#: ../../any.pm_.c:723
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Brukernavnet kan kun inneholde små bokstaver, tall, `-' og `_'"
-
-#: ../../any.pm_.c:724
-msgid "This user name is already added"
-msgstr "Denne brukeren er allerede lagt til"
-
-#: ../../any.pm_.c:728
-msgid "Add user"
-msgstr "Legg til bruker"
-
-#: ../../any.pm_.c:729
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Entre en bruker\n"
-"%s"
-
-#: ../../any.pm_.c:730
-msgid "Accept user"
-msgstr "Godta bruker"
-
-#: ../../any.pm_.c:741
-msgid "Real name"
-msgstr "Virkelig navn"
-
-#: ../../any.pm_.c:742 ../../printerdrake.pm_.c:417
-#: ../../printerdrake.pm_.c:496
-msgid "User name"
-msgstr "Brukernavn"
-
-#: ../../any.pm_.c:745
-msgid "Shell"
-msgstr "Skall"
-
-#: ../../any.pm_.c:747
-msgid "Icon"
-msgstr "Ikon"
-
-#: ../../any.pm_.c:769
-msgid "Autologin"
-msgstr "Autoinnlogging"
-
-#: ../../any.pm_.c:770
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Jeg kan sette opp maskinen din til å automatisk starte X ved oppstart.\n"
-"Vil du at X skal starte når du starter maskinen på nytt?"
-
-#: ../../any.pm_.c:774
-msgid "Choose the default user:"
-msgstr "Velg standard bruker:"
-
-#: ../../any.pm_.c:775
-msgid "Choose the window manager to run:"
-msgstr "Velg vindushåndtereren som skal kjøres:"
-
-#: ../../any.pm_.c:784
-msgid "Please, choose a language to use."
-msgstr "Vennligst velg språk som skal brukes."
-
-#: ../../any.pm_.c:786
-msgid "You can choose other languages that will be available after install"
-msgstr "Du kan velge andre språk som vil være tilgjengelige etter installasjon"
-
-#: ../../any.pm_.c:798 ../../install_steps_interactive.pm_.c:663
-msgid "All"
-msgstr "Alle"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Velkommen til %s, operativsystem-velgeren!\n"
-"\n"
-"Velg et operativsystem fra listen over eller\n"
-"vent %d sekunder for standard oppstart.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:837
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Velkommen til GRUB, operativsystem-velgeren!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:840
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Bruk %c og %c tastene for å velge hvilken inngang som er markert."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:843
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Trykk enter for † starte opp valgt OS, 'e' for † redigere"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:846
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "kommandoer for oppstart, eller 'c' for en kommandolinje."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:849
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Den markerte inngangen vil bli startet automatisk om %d sekunder."
-
-#: ../../bootloader.pm_.c:853
-msgid "not enough room in /boot"
-msgstr "ikke nok plass i /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:953
-msgid "Desktop"
-msgstr "Skrivebord"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:955
-msgid "Start Menu"
-msgstr "Startmeny"
-
-#: ../../bootloader.pm_.c:974
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Hvor ønsker du installere oppstartslasteren?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ingen hjelp implementert ennå.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Oppstartsstilkonfigurasjon"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Fil"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Fil/_Avslutt"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Categorizing Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradisjonell monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradisjonell Gtk+ monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Start Aurora ved oppstart"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modus"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Du bruker for øyeblikket %s som oppstartshåndterer.\n"
-"Klikk på Konfigurer for å starte oppsett-hjelperen."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:644
-#: ../../standalone/draknet_.c:283 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Konfigurer"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Oppstartsmodus"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Systemmodus"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Start W-Windowsystemet ved oppstart"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Nei, jeg vil ikke ha autologin"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, jeg vil ha autologin med denne (bruker; skrivebord)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:211
-#: ../../standalone/draknet_.c:323 ../../standalone/draknet_.c:439
-#: ../../standalone/draknet_.c:517 ../../standalone/draknet_.c:560
-#: ../../standalone/draknet_.c:661
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:518
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:288
-#: ../../interactive.pm_.c:310 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:421 ../../my_gtk.pm_.c:424 ../../my_gtk.pm_.c:721
-#: ../../printerdrake.pm_.c:1188 ../../standalone/drakautoinst_.c:203
-#: ../../standalone/drakgw_.c:649 ../../standalone/draknet_.c:115
-#: ../../standalone/draknet_.c:147 ../../standalone/draknet_.c:316
-#: ../../standalone/draknet_.c:533 ../../standalone/draknet_.c:675
-#: ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Avbryt"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "kan ikke åpne /etc/inittab for lesing: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Installasjon av LILO mislykket. Følgende feil oppsto:"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutter"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minutt"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekunder"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Vennligst ta sikkerhetskopi av din data først"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:803
-#: ../../diskdrake_interactive.pm_.c:812 ../../diskdrake_interactive.pm_.c:866
-msgid "Read carefully!"
-msgstr "Les nøye!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Hvis du skal bruke aboot, være nøye med å la det være ledig plass (2048 "
-"sektorer er nok)\n"
-"ved begynnelsen av disken"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:315
-#: ../../diskdrake_interactive.pm_.c:330 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:340 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Feil"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Wizard"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Ny"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "Fjern"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:482
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:525
-msgid "Mount point"
-msgstr "Monteringspunkt"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Valg"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:420
-#: ../../diskdrake.pm_.c:537 ../../diskdrake_interactive.pm_.c:355
-#: ../../diskdrake_interactive.pm_.c:490
-msgid "Type"
-msgstr "Type"
-
-#: ../../diskdrake.pm_.c:225 ../../diskdrake_interactive.pm_.c:363
-msgid "Unmount"
-msgstr "Demonter"
-
-#: ../../diskdrake.pm_.c:226 ../../diskdrake_interactive.pm_.c:359
-msgid "Mount"
-msgstr "Monter"
-
-#: ../../diskdrake.pm_.c:231
-msgid "Choose action"
-msgstr "Velg handling"
-
-#: ../../diskdrake.pm_.c:238
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Du har en stor FAT partisjon\n"
-"(vanligvis brukt av Microsoft Dos/Windows).\n"
-"Jeg forslår at du først endrer størrelsen på denne partisjonen\n"
-"(klikk på den, klikk så på \"Endre størrelse\")"
-
-#: ../../diskdrake.pm_.c:241
-msgid "Please click on a partition"
-msgstr "Vennligst klikk på en partisjon"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Vennligst klikk på en partisjon"
-
-#: ../../diskdrake.pm_.c:246
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Vennligst klikk på en partisjon"
-
-#: ../../diskdrake.pm_.c:247
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:266 ../../install_steps_gtk.pm_.c:519
-msgid "Details"
-msgstr "Detaljer"
-
-#: ../../diskdrake.pm_.c:398
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:398
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:398
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:398
-#, fuzzy
-msgid "Journalised FS"
-msgstr "montering mislykket"
-
-#: ../../diskdrake.pm_.c:398
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:398
-msgid "Swap"
-msgstr "Veksel"
-
-#: ../../diskdrake.pm_.c:399 ../../diskdrake_interactive.pm_.c:954
-msgid "Empty"
-msgstr "Tom"
-
-#: ../../diskdrake.pm_.c:399 ../../install_steps_gtk.pm_.c:375
-#: ../../install_steps_gtk.pm_.c:435 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Andre"
-
-#: ../../diskdrake.pm_.c:403
-msgid "Filesystem types:"
-msgstr "Filsystemtyper:"
-
-#: ../../diskdrake.pm_.c:420 ../../diskdrake_interactive.pm_.c:377
-msgid "Create"
-msgstr "Opprett"
-
-#: ../../diskdrake.pm_.c:420 ../../diskdrake.pm_.c:422
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Bruk ``%s'' istedet"
-
-#: ../../diskdrake.pm_.c:422 ../../diskdrake_interactive.pm_.c:364
-msgid "Delete"
-msgstr "Slett"
-
-#: ../../diskdrake.pm_.c:426
-msgid "Use ``Unmount'' first"
-msgstr "Bruk ``Demonter'' først"
-
-#: ../../diskdrake.pm_.c:427 ../../diskdrake_interactive.pm_.c:482
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Etter endring av type på partisjon %s, vil alle data på denne partisjonen gå "
-"tapt"
-
-#: ../../diskdrake.pm_.c:481 ../../diskdrake_interactive.pm_.c:524
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Hvor vil du montere %s enheten?"
-
-#: ../../diskdrake.pm_.c:503
-msgid "Mount options"
-msgstr "Monteringsvalg:"
-
-#: ../../diskdrake.pm_.c:510
-msgid "Various"
-msgstr "Diverse"
-
-#: ../../diskdrake.pm_.c:528
-msgid "Removable media"
-msgstr "Fjernbart media"
-
-#: ../../diskdrake.pm_.c:535
-msgid "Change type"
-msgstr "Endre type"
-
-#: ../../diskdrake.pm_.c:536 ../../diskdrake_interactive.pm_.c:489
-msgid "Which filesystem do you want?"
-msgstr "Hvilket filsystem ønsker du?"
-
-#: ../../diskdrake.pm_.c:567
-msgid "Scanning available nfs shared resource"
-msgstr "Sjekker tilgjengelige delte nfs-ressurser"
-
-#: ../../diskdrake.pm_.c:572
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "Sjekker tilgjengelige delte nfs-ressurser på %s"
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:584 ../../diskdrake.pm_.c:654
-msgid "Server"
-msgstr "Tjener"
-
-#: ../../diskdrake.pm_.c:585 ../../diskdrake.pm_.c:655
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:618
-msgid "Scanning available samba shared resource"
-msgstr "Sjekker tilgjengelige delte samba-ressurser"
-
-#: ../../diskdrake.pm_.c:629 ../../diskdrake.pm_.c:642
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "Sjekker tilgjengelige delte samba-ressurser på %s"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "Velg en partisjon"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Velg en annen partisjon"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Avslutt"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Skift til ekspertmodus"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Skift til normalmodus"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Angre"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Fortsette likevel?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Avslutt uten å lagre"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Avslutt uten å skrive partisjonstabellen?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ønsker du å lagre modifiseringen av /etc/fstab"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Automatisk allokering"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Fjern alle"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:201
-msgid "More"
-msgstr "Mer"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "Harddisk informasjon"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Ikke nok plass for auto-allokering"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Alle primære partisjoner er i bruk"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Jeg kan ikke legge til flere partisjoner"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"For å ha flere partisjoner vennligst slett en for å kunne opprette en "
-"utvidet partisjon"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Endre partisjonstype"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Prøver å redde partisjonstabell"
-
-#: ../../diskdrake_interactive.pm_.c:287
-#, fuzzy
-msgid "Rescue partition table"
-msgstr "Prøver å redde partisjonstabell"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Endre partisjonstype"
-
-#: ../../diskdrake_interactive.pm_.c:294
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Fjernbart media"
-
-#: ../../diskdrake_interactive.pm_.c:303 ../../diskdrake_interactive.pm_.c:323
-msgid "Select file"
-msgstr "Velg fil"
-
-#: ../../diskdrake_interactive.pm_.c:310
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Kopien av partisjonstabellen har ikke samme størrelse\n"
-"Fortsette for det?"
-
-#: ../../diskdrake_interactive.pm_.c:324
-msgid "Warning"
-msgstr "Advarsel"
-
-#: ../../diskdrake_interactive.pm_.c:325
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Sett inn en diskett i stasjonen\n"
-"Alle data på denne disketten vil gå tapt"
-
-#: ../../diskdrake_interactive.pm_.c:336
-msgid "Trying to rescue partition table"
-msgstr "Prøver å redde partisjonstabell"
-
-#: ../../diskdrake_interactive.pm_.c:342
-msgid "Detailed information"
-msgstr "Detaljert informasjon"
-
-#: ../../diskdrake_interactive.pm_.c:356 ../../diskdrake_interactive.pm_.c:592
-msgid "Resize"
-msgstr "Endre størrelse"
-
-#: ../../diskdrake_interactive.pm_.c:357 ../../diskdrake_interactive.pm_.c:632
-msgid "Move"
-msgstr "Flytt"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Format"
-msgstr "Formater"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Active"
-msgstr "Aktiv"
-
-#: ../../diskdrake_interactive.pm_.c:361
-msgid "Add to RAID"
-msgstr "Legg til RAID"
-
-#: ../../diskdrake_interactive.pm_.c:362
-msgid "Add to LVM"
-msgstr "Legg til LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Remove from RAID"
-msgstr "Fjern fra RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Remove from LVM"
-msgstr "Fjern fra LVM"
-
-#: ../../diskdrake_interactive.pm_.c:367
-msgid "Modify RAID"
-msgstr "Modifiser RAID"
-
-#: ../../diskdrake_interactive.pm_.c:368
-msgid "Use for loopback"
-msgstr "Bruk for loopback"
-
-#: ../../diskdrake_interactive.pm_.c:411
-msgid "Create a new partition"
-msgstr "Opprette en ny partisjon"
-
-#: ../../diskdrake_interactive.pm_.c:414
-msgid "Start sector: "
-msgstr "Start sektor: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:734
-msgid "Size in MB: "
-msgstr "Størrelse i MB: "
-
-#: ../../diskdrake_interactive.pm_.c:417 ../../diskdrake_interactive.pm_.c:735
-msgid "Filesystem type: "
-msgstr "Filsystemtype: "
-
-#: ../../diskdrake_interactive.pm_.c:418 ../../diskdrake_interactive.pm_.c:938
-#: ../../diskdrake_interactive.pm_.c:1012
-msgid "Mount point: "
-msgstr "Monteringspunkt: "
-
-#: ../../diskdrake_interactive.pm_.c:422
-msgid "Preference: "
-msgstr "Valg: "
-
-#: ../../diskdrake_interactive.pm_.c:464
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formaterer loopback-fil %s"
-
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Change partition type"
-msgstr "Endre partisjonstype"
-
-#: ../../diskdrake_interactive.pm_.c:493
-msgid "Switching from ext2 to ext3"
-msgstr "Bytter fra ext2 til ext3"
-
-#: ../../diskdrake_interactive.pm_.c:523
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Hvor vil du montere loopback-filen %s?"
-
-#: ../../diskdrake_interactive.pm_.c:530
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kan ikke fjerne monteringspunkt da denne partisjonen blir brukt til\n"
-"loopback. Fjern loopback først"
-
-#: ../../diskdrake_interactive.pm_.c:551
-msgid "Computing FAT filesystem bounds"
-msgstr "Beregner fat filsystemgrense"
-
-#: ../../diskdrake_interactive.pm_.c:551 ../../diskdrake_interactive.pm_.c:607
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Endrer størrelse"
-
-#: ../../diskdrake_interactive.pm_.c:580
-msgid "This partition is not resizeable"
-msgstr "Denne partisjonen kan ikke størrelsen forandres på"
-
-#: ../../diskdrake_interactive.pm_.c:585
-msgid "All data on this partition should be backed-up"
-msgstr "Alle data på denne partisjonen burde sikkerhetskopieres"
-
-#: ../../diskdrake_interactive.pm_.c:587
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Etter endring av størrelse for partisjon %s, vil alle data på denne\n"
-"partisjonen vil gå tapt"
-
-#: ../../diskdrake_interactive.pm_.c:592
-msgid "Choose the new size"
-msgstr "Velg den nye størrelsen"
-
-#: ../../diskdrake_interactive.pm_.c:593
-msgid "New size in MB: "
-msgstr "Ny størrelse i MB: "
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which disk do you want to move it to?"
-msgstr "Hvilken disk vil du flytte til?"
-
-#: ../../diskdrake_interactive.pm_.c:634
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake_interactive.pm_.c:635
-msgid "Which sector do you want to move it to?"
-msgstr "Hvilken sektor vil du flytte til?"
-
-#: ../../diskdrake_interactive.pm_.c:638
-msgid "Moving"
-msgstr "Flytter"
-
-#: ../../diskdrake_interactive.pm_.c:638
-msgid "Moving partition..."
-msgstr "Flytter partisjon..."
-
-#: ../../diskdrake_interactive.pm_.c:659
-msgid "Choose an existing RAID to add to"
-msgstr "Velg en eksisterende RAID for å legge til"
-
-#: ../../diskdrake_interactive.pm_.c:660 ../../diskdrake_interactive.pm_.c:678
-msgid "new"
-msgstr "ny"
-
-#: ../../diskdrake_interactive.pm_.c:676
-msgid "Choose an existing LVM to add to"
-msgstr "Velg en eksisterende LVM for å legge til"
-
-#: ../../diskdrake_interactive.pm_.c:681
-msgid "LVM name?"
-msgstr "LVM navn?"
-
-#: ../../diskdrake_interactive.pm_.c:720
-msgid "This partition can't be used for loopback"
-msgstr "Denne partisjonen kan ikke brukes for loopback"
-
-#: ../../diskdrake_interactive.pm_.c:732
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:733
-msgid "Loopback file name: "
-msgstr "Loopback filnavn: "
-
-#: ../../diskdrake_interactive.pm_.c:738
-#, fuzzy
-msgid "Give a file name"
-msgstr "Virkelig navn"
-
-#: ../../diskdrake_interactive.pm_.c:741
-msgid "File already used by another loopback, choose another one"
-msgstr "Filen blir allerede brukt av en annen loopback, velg en annen"
-
-#: ../../diskdrake_interactive.pm_.c:742
-msgid "File already exists. Use it?"
-msgstr "Filen eksisterer allerede. Bruke denne?"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "device"
-msgstr "enhet"
-
-#: ../../diskdrake_interactive.pm_.c:787
-msgid "level"
-msgstr "nivå"
-
-#: ../../diskdrake_interactive.pm_.c:788
-msgid "chunk size"
-msgstr "skivestørrelse"
-
-#: ../../diskdrake_interactive.pm_.c:803
-msgid "Be careful: this operation is dangerous."
-msgstr "Vær forsiktig: denne operasjonen er farlig."
-
-#: ../../diskdrake_interactive.pm_.c:818
-msgid "What type of partitioning?"
-msgstr "Hva slags type partisjonering?"
-
-#: ../../diskdrake_interactive.pm_.c:836
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Beklager, jeg vil ikke tillate oppretting av /boot så lange inne på disken "
-"(på en sylinder > 1024).\n"
-"Enten bruker du LILO og denne ikke virker, eller du bruker ikke LILO og du "
-"trenger ikke /boot"
-
-#: ../../diskdrake_interactive.pm_.c:840
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Partisjonen du valgte å legge til som root (/) er lokalisert fysisk "
-"bortenfor\n"
-"den 1024'de sylinderen på hard-disken, og du har ingen /boot partisjon.\n"
-"Hvis du skal bruke oppstartshåndtereren LILO, vær nøye med å legge til en\n"
-"/boot partisjon"
-
-#: ../../diskdrake_interactive.pm_.c:846
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Du har valgt en programvare RAID partisjon som root (/).\n"
-"Ingen oppstartslaster kan håndtere dette uten en /boot partisjon.\n"
-"Så vær nøye med å legge til en /boot partisjon"
-
-#: ../../diskdrake_interactive.pm_.c:866
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partisjonstabellen på disk %s blir nå skrevet til disk!"
-
-#: ../../diskdrake_interactive.pm_.c:870
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Du må starte maskinen på nytt for at modifiseringene skal tre i kraft"
-
-#: ../../diskdrake_interactive.pm_.c:881
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Etter formatering av partisjon %s vil alle data på denne partisjonen\n"
-"gå tapt"
-
-#: ../../diskdrake_interactive.pm_.c:883
-msgid "Formatting"
-msgstr "Formatering"
-
-#: ../../diskdrake_interactive.pm_.c:884
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formaterer loopback-fil %s"
-
-#: ../../diskdrake_interactive.pm_.c:885
-#: ../../install_steps_interactive.pm_.c:449
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formaterer partisjon %s"
-
-#: ../../diskdrake_interactive.pm_.c:896
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid mislykket"
-
-#: ../../diskdrake_interactive.pm_.c:896
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Ikke nok plass til å allokere en ny partisjon"
-
-#: ../../diskdrake_interactive.pm_.c:897
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:908
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Ikke nok plass til å allokere en ny partisjon"
-
-#: ../../diskdrake_interactive.pm_.c:912
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:916
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Fjerner LPD..."
-
-#: ../../diskdrake_interactive.pm_.c:939 ../../diskdrake_interactive.pm_.c:998
-msgid "Device: "
-msgstr "Enhet: "
-
-#: ../../diskdrake_interactive.pm_.c:940
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS diskbokstav: %s (bare en gjetning)\n"
-
-#: ../../diskdrake_interactive.pm_.c:944 ../../diskdrake_interactive.pm_.c:952
-#: ../../diskdrake_interactive.pm_.c:1016
-msgid "Type: "
-msgstr "Type: "
-
-#: ../../diskdrake_interactive.pm_.c:948
-msgid "Name: "
-msgstr "Navn: "
-
-#: ../../diskdrake_interactive.pm_.c:956
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Start: sektor %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid "Size: %s"
-msgstr "Størrelse: %s"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorer"
-
-#: ../../diskdrake_interactive.pm_.c:961
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Sylinder %d til sylinder %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Formatted\n"
-msgstr "Formatert\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-msgid "Not formatted\n"
-msgstr "Ikke formatert\n"
-
-#: ../../diskdrake_interactive.pm_.c:964
-msgid "Mounted\n"
-msgstr "Montert\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:967
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback-fil(s): %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partisjon startet opp som standard\n"
-"    (for MS-DOS oppstart, ikke for lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivå %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:971
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Skivestørrelse %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-disker %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:974
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback filnavn: %s"
-
-#: ../../diskdrake_interactive.pm_.c:977
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Det er store sjanser for at\n"
-"denne partisjonen er en\n"
-"driverpartisjon, du bør nok\n"
-"la den være i fred.\n"
-
-#: ../../diskdrake_interactive.pm_.c:980
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Denne spesielle Bootstrap-\n"
-"partisjonen er for å\n"
-"dual-boote ditt system.\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-#, c-format
-msgid "Size: %s\n"
-msgstr "Størrelse: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometri: %s sylindere, %s hoder, %s sektorer\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-disker %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1003
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Type partisjonstabell: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1004
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "på buss %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1018
-#, c-format
-msgid "Options: %s"
-msgstr "Valg: %s"
-
-#: ../../fs.pm_.c:454 ../../fs.pm_.c:464 ../../fs.pm_.c:468 ../../fs.pm_.c:472
-#: ../../fs.pm_.c:476 ../../fs.pm_.c:480
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering av %s mislykket"
-
-#: ../../fs.pm_.c:513
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Jeg vet ikke hvordan formatere %s i type %s"
-
-#: ../../fs.pm_.c:575
-msgid "mount failed"
-msgstr "montering mislykket"
-
-#: ../../fs.pm_.c:595
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck avsluttet med feilkode %d eller signal %d"
-
-#: ../../fs.pm_.c:604 ../../fs.pm_.c:610 ../../partition_table.pm_.c:579
-msgid "mount failed: "
-msgstr "montering mislykket: "
-
-#: ../../fs.pm_.c:625 ../../partition_table.pm_.c:575
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "feil ved demontering av %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "enkel"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:465
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Du kan ikke bruke JFS for partisjoner mindre enn 16 MB"
-
-#: ../../fsedit.pm_.c:466
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Du kan ikke bruke ReiserFS for partisjoner mindre enn 32MB"
-
-#: ../../fsedit.pm_.c:475
-msgid "Mount points must begin with a leading /"
-msgstr "Monteringspunkter må begynne med /"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Det finnes allerede en partisjon med monteringspunkt %s\n"
-
-#: ../../fsedit.pm_.c:480
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Du kan ikke bruke LVM logisk volum som monteringspunkt %s"
-
-#: ../../fsedit.pm_.c:482
-msgid "This directory should remain within the root filesystem"
-msgstr "Denne katalogen bør forbli i root filsystemet"
-
-#: ../../fsedit.pm_.c:484
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Du trenger et virkelig filsystem (ext2, reiserfs) for dette "
-"monteringspunktet\n"
-
-#: ../../fsedit.pm_.c:600
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Feil ved åpning av %s for skriving: %s"
-
-#: ../../fsedit.pm_.c:685
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"En feil har oppstått - ingen gyldige enheter ble funnet for å opprette nye "
-"filsystemer. Vennligst sjekk maskinvaren din for årsaken til dette problemet"
-
-#: ../../fsedit.pm_.c:708
-msgid "You don't have any partitions!"
-msgstr "Du har ingen partisjoner!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux er ett multibrukersystem, og dette betyr at hver bruker kan ha "
-"sine\n"
-"instillinger, sine egne filer osv. Du kan lese brukerguiden for å få vite "
-"mer.\n"
-"Men i motsetning til root, som er administratoren, så vil brukerene du "
-"legger til\n"
-"her ikke ha rett til å forandre noe annet enn deres egne filer "
-"ogkonfigurasjon.\n"
-"Du må lage minst en bruker for deg selv.\n"
-"Denne kontoen bør du bruke for all rutinebruk. Selv om det er praktisk å "
-"logge\n"
-"inn som root hver dag, kan deg også være veldig farlig! Den minste feil "
-"kunne\n"
-"bety at systemet ditt ikke lenger virker. Hvis du gjør en stor feil som en "
-"vanlig\n"
-"bruker vil du kunne miste noe informasjon, men ikke hele systemet.\n"
-"\n"
-"Først må du skrive inn ditt virkelige navn. Dette er ikke nødvendig, da du "
-"kan\n"
-"skrive inn hva du vil. drakX vil ta det første ordet du legger inn og "
-"foreslå det som\n"
-"brukernavn. Dette er det brukernavnet den brukeren vil bruke for å logge seg "
-"på\n"
-"systemet. Du kan forandre det. Du må legge inn ett passord her. En "
-"ikkepriviligert\n"
-"brukers passord er ikke så viktig som root sitt sett i fra "
-"systemsikkerhetens side,\n"
-"men det er ingen grunn til ignorere det av den grunn, det er dine filer som "
-"er i \n"
-"faresonen.\n"
-"\n"
-"Hvis du klikker på aksepter bruker kan du da legge til så mange brukere som "
-"du\n"
-"vil. Når du har lagt til alle de brukerene du ønsker, klikk på ferdig.\n"
-"\n"
-"Ved å klikke på avansert kan du forandre hvilket shell brukeren har som "
-"standard.\n"
-"(Det vanlige er bash)"
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ovenfor nevnes de eksisterende Linux partisjonene oppdaget på\n"
-"harddisken din. Du kan beholde valg som er gjort av hjelperen, de er gode "
-"for vanlig\n"
-"bruk. Du kan endre disse valgene, du må i hvertfall definere en root\n"
-"partisjon (\"/\"). Ikke velg for liten partisjon ellers vil du ikke kunne\n"
-"installere nok programvare. Hvis du ønsker å lagre dine data på en separat "
-"partisjon\n"
-"må du også velge en \"/home\" (bare mulig hvis du har mer enn en\n"
-"Linux partisjon tilgjengelig).\n"
-"\n"
-"\n"
-"For informasjon, hver partisjon er listet som følger: \"Navn\", \"Kapasitet"
-"\".\n"
-"\n"
-"\n"
-"\"Navn\" er kodet som følger: \"harddisk type\", \"harddisk nummer\",\n"
-"\"partisjon nummer\" (f.eks., \"hda1\").\n"
-"\n"
-"\n"
-"\"Harddisk type\" er \"hd\" hvis harddisken din er en IDE harddisk og \"sd"
-"\"\n"
-"hvis den er en SCSI harddisk.\n"
-"\n"
-"\n"
-"\"Hard drive nummer\" er alltid en bokstav etter \"hd\" eller \"sd\". Med "
-"IDE harddisker:\n"
-"\n"
-"   * \"a\" betyr \"master harddisk på primær IDE kontroller\",\n"
-"\n"
-"   * \"b\" betyr \"slave harddisk på primær IDE kontroller\",\n"
-"\n"
-"   * \"c\" betyr \"master harddisk på sekundær IDE kontroller\",\n"
-"\n"
-"   * \"d\" betyr \"slave harddisk på sekundær IDE kontroller\".\n"
-"\n"
-"\n"
-"Med SCSI harddisker, en \"a\" betyr \"primær harddisk\", en \"b\" betyr "
-"\"sekundær harddisk\", etc..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": if the machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to see installed on\n"
-"the machine.\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux håndterer tid i GMT (Greenwich Mean Time)\n"
-"og oversetter denne til lokal tid ihht. den tidssonen du har valgt."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*) : saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:384
-#, fuzzy
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"Før du går videre bør du lese lisensen nøye.\n"
-"Den dekker hele Mandrake Linux distribusjonen og hvis du ikke er enig\n"
-"med alt den sier, klikk på 'Jeg nekter' knappen. Det vil avsluttet\n"
-"installasjonen. For å fortsette installasjonen, klikk på 'Jeg aksepterer'."
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-#, fuzzy
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"På dette punktet må du velge hvilken\n"
-"partisjon(er) som skal brukes til å installere ditt nye Mandrake Linux "
-"system. Hvis partisjoner\n"
-"allerede har blitt definert (fra en tidligere installasjon av GNU/Linux "
-"eller fra\n"
-"et annet partisjoneringsverktøy), kan du bruke eksisterende partisjoner. I "
-"andre tilfeller\n"
-"må harddiskpartisjoner defineres.\n"
-"\n"
-"\n"
-"For å opprette partisjoner må du først velge en harddisk. Du kan velge disk\n"
-"for partisjonering ved å klikke på \"hda\" for den første IDE disken, \"hdb"
-"\" for\n"
-"den andre eller \"sda\" for den første SCSI disken osv.\n"
-"\n"
-"\n"
-"For å partisjonere den valgte harddisken kan du bruke disse valgene:\n"
-"\n"
-"   * Fjern alle: dette valget sletter alle partisjoner tilgjengelig på den "
-"valgte harddisken.\n"
-"\n"
-"\n"
-"   * Auto allokering:: dette valget lar deg automatisk opprette Ext2 og "
-"veksel partisjoner på den ledige plassen på\n"
-"     harddisken din.\n"
-"\n"
-"\n"
-"   * Redd partisjonstabell: hvis partisjonstabellen din er skadet kan du "
-"forsøke å redde den ved å bruke dette valget. Vær\n"
-"     forsiktig og husk at det kan gå galt.\n"
-"\n"
-"\n"
-"   * Angre: du kan bruke dette valget til kanselere endringene dine.\n"
-"\n"
-"\n"
-"   * Last igjen: du kan bruke dette valget hvis du angrer alle endringer og "
-"vil laste partisjonstabellen du begynte med\n"
-"\n"
-"\n"
-"   * Veiviser: Hvis du ønsker å bruke en hjelper til å partisjonere "
-"harddisken din kan du bruke dette valget. Anbefales hvis\n"
-"     du ikke har god kunnskap om partisjonering.\n"
-"\n"
-"\n"
-"   * Gjenopprett fra diskett: hvis du har lagret partisjonstabellen din på "
-"en diskett under en tidligere installasjon kan du\n"
-"     gjenopprette denne ved å bruke dette valget.\n"
-"\n"
-"\n"
-"   * Lagre på diskett: hvis du ønsker å lagre partisjonstabellen din på en "
-"diskett for å kunne gjenopprette denne kan du bruke dette\n"
-"     valget. Det anbefales på det sterkeste å bruke dette valget.\n"
-"\n"
-"\n"
-"   * Ferdig: når du er ferdig med å partisjonere harddisken din bruk dette "
-"valget til å lagre endringene dine.\n"
-"\n"
-"\n"
-"For informasjon kan du nå valgene ved å bruke tastaturet: naviger gjennom "
-"partisjonene ved å bruke Tab og Up/Down pilene.\n"
-"\n"
-"\n"
-"Når en partisjon er valgt kan du bruke:\n"
-"\n"
-"           * Ctrl-c til å opprette en ny partisjon (når en tom partisjon er "
-"valgt)\n"
-"\n"
-"           * Ctrl-d til å slette en partisjon\n"
-"\n"
-"           * Ctrl-m til å sette monteringspunktet\n"
-".............\n"
-"\n"
-".............\n"
-"Hvis du installerer på en PPV maskin, så vil du nok lage en liten "
-"HFS'bootstrap-partisjon' på minst en megabyte for bruk\n"
-"av yaboot oppstartslasteren. Hvis du ønsker  å lage partisjonen litt større, "
-"laoss si 50 MB, så kan du kanskje lagre en ekstra kjene og ramdiskbilde for "
-"nødsituasjoner."
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want to resize in order to install your\n"
-"new Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Mer enn en Microsoft Windows partisjon har blitt\n"
-"oppdaget på harddisken din. Vennligst velg den du ønsker å endre størrelsen "
-"på for å\n"
-"installere ditt nye Mandrake Linux operativsystem.\n"
-"\n"
-"\n"
-"For informasjon, hver partisjon er listet som følger: \"Linux navn\", "
-"\"Windows\n"
-"navn\" \"Kapasitet\".\n"
-"\n"
-"\"Linux navn\" er kodet som følger: \"harddisk type\", \"harddisk nummer\",\n"
-"\"partisjon nummer\" (f.eks., \"hda1\").\n"
-"\n"
-"\n"
-"\"Harddisk type\" er \"hd\" hvis harddisken din er en IDE harddisk og \"sd"
-"\"\n"
-"hvis den er en SCSI harddisk.\n"
-"\n"
-"\n"
-"\"Hard drive nummer\" er alltid en bokstav etter \"hd\" eller \"sd\". Med "
-"IDE harddisker:\n"
-"\n"
-"   * \"a\" betyr \"master harddisk på primær IDE kontroller\",\n"
-"\n"
-"   * \"b\" betyr \"slave harddisk på primær IDE kontroller\",\n"
-"\n"
-"   * \"c\" betyr \"master harddisk på sekundær IDE kontroller\",\n"
-"\n"
-"   * \"d\" betyr \"slave harddisk på sekundær IDE kontroller\".\n"
-"\n"
-"Med SCSI harddisker, en \"a\" betyr \"primær harddisk\", en \"b\" betyr "
-"\"sekundær harddisk\", etc.\n"
-"\n"
-"\"Windows navn\" er bokstaven på harddisken din under Windows (den første "
-"disken\n"
-"eller partisjonen er kalt \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Vær tålmodig. Denne operasjonen kan ta flere minutter."
-
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Vennligst velg den riktige porten. F.eks., COM1 porten\n"
-"under MS Windows blir kalt ttyS0 i GNU/Linux."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) og Grub er oppstartslastere: de kan starte opp enten\n"
-"GNU/Linux eller et annet operativsystem som du har på datamaskinen din.\n"
-"Normalt blir de andre operativsystemene korrekt oppdaget og installert.\n"
-"Hvis dette ikke er tilfelle, kan du legge til disse for hånd i dette\n"
-"bildet. Vær nøye med å velge de korrekte parameterene.\n"
-"\n"
-"\n"
-"Hvis du ikke ønsker å gi tilgang til de andre operativsystemene til\n"
-"andre kan du fjerne linjene for disse. Men i så tilfelle trenger du\n"
-"en oppstartsdiskett for å starte disse!"
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Du må indikere hvor du ønsker å\n"
-"plassere informasjonen som behøves for oppstart av GNU/Linux.\n"
-"\n"
-"Med mindre du vet akkurat hva du gjør, velg \"Første sektor av\n"
-"disken (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting Information on Your\n"
-"Hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Du kan legge til flere valg for yaboot, enten for andre operativsystemer\n"
-"andre kjerner, eller for ett nødbootspeil.\n"
-"\n"
-"\n"
-"For andre OS - skriv inn navn og rotpartisjon\n"
-"\n"
-"\n"
-"Det er for Linux noen mulige valg:\n"
-"\n"
-"\n"
-"  - Label: This is simply the name will type at the yaboot prompt to select "
-"this \n"
-"boot option.\n"
-"\n"
-"\n"
-"  - Image: This would be the name of the kernel to boot.  Typically vmlinux "
-"or\n"
-"a variation of vmlinux with an extension.\n"
-"\n"
-"\n"
-"  - Root: The root device or '/' for your Linux installation.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: On Apple hardware, the kernel append option is used quite often "
-"to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button "
-"emulation\n"
-"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The "
-"following \n"
-"are some examples:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: This option can be used either to load initial modules, before "
-"the boot \n"
-"device is available, or to load a ramdisk image for an emergency boot "
-"situation.\n"
-"\n"
-"\n"
-"  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you "
-"should need\n"
-"to allocate a large ramdisk, this option can be used.\n"
-"\n"
-"\n"
-"  - Read-write: Normally the 'root' partition is initially brought up read-"
-"only, to allow\n"
-"a filesystem check before the system becomes 'live'.  You can override this "
-"option here.\n"
-"\n"
-"\n"
-"  - NoVideo: Should the Apple video hardware prove to be exceptionally "
-"problematic, you can\n"
-"select this option to boot in 'novideo' mode, with native framebuffer "
-"support.\n"
-"\n"
-"\n"
-"  - Default: Selects this entry as being the default Linux selection, "
-"selectable by just\n"
-"pressing ENTER at the yaboot prompt.  This entry will also be highlighted "
-"with a '*', if you\n"
-"press TAB to see the boot selections."
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot er en oppstartslaster for NewWorld MacIntosh hardware. Den kan\n"
-"starte enten GNU/Linux, MacOS eller MacOSX, hvis de er til stede på din\n"
-"datamaskin. Vanligvis vil disse andre operativsystemer bli korrekt oppdaget "
-"og\n"
-"installert. Hvis dette ikke skulle være tilfelle kan du legge til endringer "
-"her.\n"
-"Vær forsiktig når du velger de korrekte parametre.\n"
-"\n"
-"\n"
-"Yaboots hovdvalg er:\n"
-"\n"
-"\n"
-"  - Init beskjed: En enkel melding som vises før \n"
-"oppstartsprosessen starter.\n"
-"\n"
-"\n"
-"  - Oppstartsenhet: Indiker hvor du ønsker å plassere informasjonen\n"
-"som trengs for å starte GNU/Linux. Du vil generelt ha satt opp en\n"
-"bootstrap-partisjon for å ha denne informasjonen.\n"
-"\n"
-"\n"
-"  - Åpne firmwareforsinkelse: Ulikt LILO så er det to forsinkelser\n"
-"som er tilgjengelig med yaboot. Den første forsinkelsen blir målt i\n"
-"sekunder og du kan ved det punktet velge mellom CD, OF-boot, \n"
-"MacOS eller Linux.\n"
-"\n"
-"  - KjernebBoot Timeout: Denne er lik LILI oppstartsforsinkelse.\n"
-"Etter å ha valgt Linux, vil du ha 0,1 sekunder før standard kjerne \n"
-"blir valgt.\n"
-"\n"
-"\n"
-"  - Aktiver CD Boot?: Hvis du velger dette valget vil \n"
-"du kunne trykke 'C' for CD ved det første oppstartsvalget.\n"
-"\n"
-"\n"
-"  - Aktiver OF Boot?: Hvis du velger dette valget vil du kunne\n"
-"trykke 'N' for Open Formware ved det første oppstartsvalget.\n"
-"\n"
-"\n"
-"  - Standard OS: Du kan velge hvilket OS som skal lastes når\n"
-"Open Firmwareforsinkelsen er utløpt."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Velg den harddisken du ønsker å slette for å installere din\n"
-"nye Mandrake Linux partisjon. Vær forsiktig, alle data på denne vil gå tapt\n"
-"og kan ikke bli gjenopprettet."
-
-#: ../../help.pm_.c:832
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klikk på \"OK\" hvis du ønsker å slette alle data og\n"
-"partisjoner på denne harddisken. Vær forsiktig, etter at du har klikket på "
-"\"OK\",\n"
-"vil du ikke kunne gjenopprette data og partisjoner på denne hard- disken,\n"
-"inkludert Windows data.\n"
-"\n"
-"\n"
-"Klikk på \"Avbryt\" for å avbryte denne operasjonen uten å miste data og\n"
-"partisjoner på denne harddisken."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:420
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"D har valgt følgende tjener(e): %s\n"
-"\n"
-"\n"
-"Disse tjenerene er aktivert som standard. De har ingen kjente sikkerhets-\n"
-"problemer, men noen nye kan bli funnet. I så tilfelle må du oppgradere\n"
-"så snart som mulig.\n"
-"\n"
-"\n"
-"Ønsker du virkelig å installere disse tjenerene?\n"
-
-#: ../../install_any.pm_.c:456
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kan ikke bruke broadcast med intet NIS domene"
-
-#: ../../install_any.pm_.c:792
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Sett inn en FAT-formatert diskett i stasjon %s"
-
-#: ../../install_any.pm_.c:796
-msgid "This floppy is not FAT formatted"
-msgstr "Denne disketten er ikke FAT-formatert"
-
-#: ../../install_any.pm_.c:808
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"For å bruke dette valget av pakker, start installasjonen med'linux "
-"defcfg=floppy'"
-
-#: ../../install_any.pm_.c:830 ../../partition_table.pm_.c:741
-#, c-format
-msgid "Error reading file %s"
-msgstr "Feil ved lesing av fil %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:327
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:288 ../../interactive.pm_.c:310
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:141 ../../interactive_stdio.pm_.c:142
-#: ../../my_gtk.pm_.c:420 ../../my_gtk.pm_.c:721 ../../my_gtk.pm_.c:743
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Noe maskinvare i maskinen din trenger ``riktige'' drivere for å virke.\n"
-"Du kan finne noe informasjon om disse her: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Du må ha en root-partisjon.\n"
-"Opprett en partisjon for dette (eller klikk på en eksisterende).\n"
-"Velg så ``Monteringspunkt'' og  sett dette til `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Du må ha en vekslingspartisjon"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Du har ingen vekselpartisjon\n"
-"\n"
-"Fortsette likevel?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Du må ha en FAT-parisjonen montert under /boot/efi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Bruk ledig plass"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ikke nok plass til å allokere en ny partisjon"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Bruk eksisterende partisjon"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Det finnes ingen eksisterende partisjon som kan brukes"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Bruk Windows partisjonen for loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Hvilken partisjon vil du bruke for Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Velg størrelsene"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Root-partisjonsstørrelse i MB: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Veksel-partisjonsstørrelse i MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Bruk den ledige plassen på Windows partisjonen"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Hvilken partisjonstype ønsker du å forandre størrelse på?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Beregner Windows filsystemgrense"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Størrelsesendreren for FAT greide ikke å håndtere din partisjon, \n"
-"følgende feil oppsto: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Windows-partisjonen din er for fragmentert, vennligst kjør ``defrag'' først"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ADVARSEL!\n"
-"\n"
-"DrakX trenger nå å endre størrelsen på Windows partisjonen din. Vær "
-"forsiktig: denne operasjonen er\n"
-"farlig. Hvis du ikke allerede har gjort det burde du kjøre scandisk først "
-"(og\n"
-"som en opsjon kjøre defrag) på denne partisjonen og ta sikkerhetskopi av "
-"dine data.\n"
-"Når du er sikker, trykk Ok."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Hvilken størrelse ønsker du å beholde vinduer på?"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "partisjon %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Krymping/forstørring av FAT feilet: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Det finnes ingen FAT partisjon å forandre størrelsen på eller å bruke som "
-"loopback (ikke nok plass igjen)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Slette hele disken"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Fjern Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Du har mer enn en harddisk, hvilken ønsker du å installere linux på?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "ALLE eksisterende partisjoner og deres data vil være tapt på disk %s"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Egendefinert diskpartisjonering"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Bruk fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Du kan nå partisjonere %s.\n"
-"Når du er ferdig ikke glem å lagre med `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Du har ikke nok ledig plass på Windows partisjonen din"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Jeg kan ikke finne noe rom for installering"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX partisjonsveiviseren fant følgende løsninger:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partisjonering feilet: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Henter opp nettverket"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Tar ned nettverket"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"En feil oppsto, men jeg vet ikke hvordan jeg skal håndtere dette på en\n"
-"pen måte.\n"
-"Fortsett på eget ansvar."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dupliser monteringspunkt %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Noen viktige pakker ble ikke installert ordentlig.\n"
-"Det er noe galt enten med CD-rom'en eller CD-platen.\n"
-"Sjekk cd-platen på en installert maskin med \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-
-#: ../../install_steps.pm_.c:463
-#, c-format
-msgid "Welcome to %s"
-msgstr "Velkommen til %s"
-
-#: ../../install_steps.pm_.c:510 ../../install_steps.pm_.c:714
-msgid "No floppy drive available"
-msgstr "Ingen diskettstasjon tilgjengelig"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entrer trinn `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Velg størrelsen du ønsker å installere"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Total størrelse: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versjon: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:390
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Størrelse: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:483
-#: ../../install_steps_interactive.pm_.c:539
-msgid "Choose the packages you want to install"
-msgstr "Velg pakkene du ønsker å installere"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Info"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:459
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Install"
-msgstr "Installer"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:499
-#: ../../install_steps_interactive.pm_.c:731
-msgid "Installing"
-msgstr "Installerer"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Vennligst vent, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:512
-msgid "Time remaining "
-msgstr "Tid som gjenstår "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Total tid "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:731
-msgid "Preparing installation"
-msgstr "Forbereder installasjon"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:560
-#, c-format
-msgid "Installing package %s"
-msgstr "Installerer pakke %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:616
-#: ../../install_steps_gtk.pm_.c:620 ../../install_steps_interactive.pm_.c:768
-#: ../../install_steps_interactive.pm_.c:772
-msgid "Go on anyway?"
-msgstr "Fortsette uansett?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:616
-#: ../../install_steps_interactive.pm_.c:768
-msgid "There was an error ordering packages:"
-msgstr "Det var en feil ved endring av pakkenes rekkefølge:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Bruke eksisterende konfigurasjon for X11?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Systemet ditt har lite ressurser. Du kan muligens oppleve noen problemer\n"
-"ved installering av Mandrake Linux. Hvis dette skjer kan du prøve tekst- "
-"installering\n"
-"i stedet. Trykk `F1' ved oppstart av CD-ROM, skriv så `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:217
-msgid "Install Class"
-msgstr "Installeringsklasse"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Vennligst velg en av følgende installasjonsklasser:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Den totale størrelsen for gruppene du har valgt er omtrent %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Hvis du ønsker å installere mindre enn denne størrelsen,\n"
-"velg den prosentdelen av pakkene som du ønsker å installere.\n"
-"\n"
-"En lav prosentdel vil installere bare de mest viktige pakkene;\n"
-"en prosentdel på 100%% vil installere alle valgte pakker."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Du har plass på disken din for bare %d%% av disse pakkene.\n"
-"\n"
-"Hvis du ønsker å installere mindre enn dette,\n"
-"velg den prosentdelen av pakkene som du ønsker å installere.\n"
-"En lav prosentdel vil installere bare de mest viktige pakkene;\n"
-"en prosentdel på %d%% vil installere så mange pakker som mulig."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Du vil kunne velge disse mere spesifisert i neste trinn."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Prosentdel av pakker å installere"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:649
-msgid "Package Group Selection"
-msgstr "Valg pakkegruppe"
-
-#: ../../install_steps_gtk.pm_.c:322 ../../install_steps_interactive.pm_.c:664
-msgid "Individual package selection"
-msgstr "Individuelt pakkevalg"
-
-#: ../../install_steps_gtk.pm_.c:345 ../../install_steps_interactive.pm_.c:628
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Total størrelse: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:387
-msgid "Bad package"
-msgstr "Dårlig pakke"
-
-#: ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Name: %s\n"
-msgstr "Navn: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:391
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Viktighet: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:413
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Du kan ikke velge denne pakken da det ikke er igjen nok plass til å "
-"installere denne"
-
-#: ../../install_steps_gtk.pm_.c:418
-msgid "The following packages are going to be installed"
-msgstr "Følgende pakker vil bli installert"
-
-#: ../../install_steps_gtk.pm_.c:419
-msgid "The following packages are going to be removed"
-msgstr "Følgende pakker vil bli fjernet"
-
-#: ../../install_steps_gtk.pm_.c:431
-msgid "You can't select/unselect this package"
-msgstr "Du kan ikke velge/fjerne denne pakken"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dette er en bestemt pakke, den kan ikke fjernes"
-
-#: ../../install_steps_gtk.pm_.c:445
-msgid "You can't unselect this package. It is already installed"
-msgstr "Du kan ikke fjerne denne pakken, den er allerede installert"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Denne pakken må oppgraderes\n"
-"Er du sikker på at du ikke vil velge denne?"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Du kan ikke fjerne denne pakken. Den må oppgraderes"
-
-#: ../../install_steps_gtk.pm_.c:458
-msgid "Show automatically selected packages"
-msgstr "Vis automatisk valgte pakker"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Load/Save on floppy"
-msgstr "Lagre på/hente fra diskett"
-
-#: ../../install_steps_gtk.pm_.c:463
-msgid "Updating package selection"
-msgstr "Oppdaterer pakkevalg"
-
-#: ../../install_steps_gtk.pm_.c:468
-msgid "Minimal install"
-msgstr "Minimal installasjon"
-
-#: ../../install_steps_gtk.pm_.c:505
-msgid "Estimating"
-msgstr "Beregner"
-
-#: ../../install_steps_gtk.pm_.c:524
-msgid "Please wait, preparing installation"
-msgstr "Vennligst vent, forbereder installasjon"
-
-#: ../../install_steps_gtk.pm_.c:555
-#, c-format
-msgid "%d packages"
-msgstr "%d pakker"
-
-#: ../../install_steps_gtk.pm_.c:601 ../../install_steps_interactive.pm_.c:178
-#: ../../install_steps_interactive.pm_.c:755
-#: ../../standalone/drakautoinst_.c:202
-msgid "Accept"
-msgstr "Godta"
-
-#: ../../install_steps_gtk.pm_.c:601 ../../install_steps_interactive.pm_.c:178
-#: ../../install_steps_interactive.pm_.c:755
-msgid "Refuse"
-msgstr "Nekte"
-
-#: ../../install_steps_gtk.pm_.c:602 ../../install_steps_interactive.pm_.c:756
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Bytt CD!\n"
-"\n"
-"Vennligst sett inn CD'en merket \"%s\" i stasjonen og trykk Ok når du er "
-"ferdig.\n"
-"Hvis du ikke har den trykk Avbryt for å unngå installasjon fra denne CD'en."
-
-#: ../../install_steps_gtk.pm_.c:620 ../../install_steps_interactive.pm_.c:772
-msgid "There was an error installing packages:"
-msgstr "Det var en feil ved installering av pakkene:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "En feil oppsto"
-
-#: ../../install_steps_interactive.pm_.c:101
-msgid "License agreement"
-msgstr "License agreement"
-
-#: ../../install_steps_interactive.pm_.c:102
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:198
-#: ../../install_steps_interactive.pm_.c:944
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatur"
-
-#: ../../install_steps_interactive.pm_.c:199
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Vennligst velg tastatur-oppsettet ditt."
-
-#: ../../install_steps_interactive.pm_.c:200
-msgid "Here is the full list of keyboards available"
-msgstr "Her er den komplette lista over tilgjengelige tastatur"
-
-#: ../../install_steps_interactive.pm_.c:217
-msgid "Which installation class do you want?"
-msgstr "Hvilken installasjonsklasse ønsker du?"
-
-#: ../../install_steps_interactive.pm_.c:219
-msgid "Install/Update"
-msgstr "Installer/Oppdater"
-
-#: ../../install_steps_interactive.pm_.c:219
-msgid "Is this an install or an update?"
-msgstr "Er dette en installering eller en oppdatering?"
-
-#: ../../install_steps_interactive.pm_.c:228
-msgid "Recommended"
-msgstr "Anbefalt"
-
-#: ../../install_steps_interactive.pm_.c:231
-#: ../../install_steps_interactive.pm_.c:234
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Update"
-msgstr "Oppdater"
-
-#: ../../install_steps_interactive.pm_.c:254 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Vennligst velg din musetype."
-
-#: ../../install_steps_interactive.pm_.c:260 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Museport"
-
-#: ../../install_steps_interactive.pm_.c:261 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Vennligst velg hvilken serieport musen din koblet til."
-
-#: ../../install_steps_interactive.pm_.c:269
-msgid "Buttons emulation"
-msgstr "Emulering knapper"
-
-#: ../../install_steps_interactive.pm_.c:271
-msgid "Button 2 Emulation"
-msgstr "Emulering 2 knapper"
-
-#: ../../install_steps_interactive.pm_.c:272
-msgid "Button 3 Emulation"
-msgstr "Emulering 3 knapper"
-
-#: ../../install_steps_interactive.pm_.c:291
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurerer PCMCIA kort..."
-
-#: ../../install_steps_interactive.pm_.c:291
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:296
-msgid "Configuring IDE"
-msgstr "Konfigurerer IDE"
-
-#: ../../install_steps_interactive.pm_.c:296
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:311
-msgid "no available partitions"
-msgstr "ingen tilgjengelige partisjoner"
-
-#: ../../install_steps_interactive.pm_.c:314
-msgid "Scanning partitions to find mount points"
-msgstr "Skanner partisjoner for å finne monteringspunkter"
-
-#: ../../install_steps_interactive.pm_.c:322
-msgid "Choose the mount points"
-msgstr "Velg monteringspunktene"
-
-#: ../../install_steps_interactive.pm_.c:341
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Jeg kan ikke lese partisjonstabellen din, den er for ødelagt for meg :(\n"
-"Jeg kan forsøke å blanke ut dårlige partisjoner (ALLE DATA vil gå tapt!)\n"
-"Den andre løsningen er å ikke la DrakX modifisere partisjonstabellen.\n"
-"(feilen er %s)\n"
-"\n"
-"Vil du miste alle partisjonene?\n"
-
-#: ../../install_steps_interactive.pm_.c:354
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake klarte ikke å lese partisjonstabellen korrekt.\n"
-"Fortsett på eget ansvar!"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Det er ikke plass for 1 MB bootstrap! Installasjonen vil fortsette, but for "
-"åboote systemet ditt, må du lage en bootstrap partisjon i DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:379
-msgid "No root partition found to perform an upgrade"
-msgstr "Ingen rotpartisjon funnet for oppgradering"
-
-#: ../../install_steps_interactive.pm_.c:380
-msgid "Root Partition"
-msgstr "Rotpartisjon"
-
-#: ../../install_steps_interactive.pm_.c:381
-msgid "What is the root partition (/) of your system?"
-msgstr "Hva er rotpartisjonen (/) på ditt system?"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Du må starte maskinen på nytt for at modifiseringene skal tre i kraft"
-
-#: ../../install_steps_interactive.pm_.c:419
-msgid "Choose the partitions you want to format"
-msgstr "Velg partisjonene du ønsker å partisjonere"
-
-#: ../../install_steps_interactive.pm_.c:420
-msgid "Check bad blocks?"
-msgstr "Sjekke fo rdårlige clustere?"
-
-#: ../../install_steps_interactive.pm_.c:446
-msgid "Formatting partitions"
-msgstr "Formaterer partisjoner"
-
-#: ../../install_steps_interactive.pm_.c:448
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Lager of formaterer fila %s"
-
-#: ../../install_steps_interactive.pm_.c:451
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Det er ikke nok SWAP til å fullføre installasjonen, vennligst legg til litt "
-"mer"
-
-#: ../../install_steps_interactive.pm_.c:457
-msgid "Looking for available packages"
-msgstr "Søker etter tilgjengelige pakker"
-
-#: ../../install_steps_interactive.pm_.c:463
-msgid "Finding packages to upgrade"
-msgstr "Finner pakker som skal oppgraderes"
-
-#: ../../install_steps_interactive.pm_.c:480
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Ditt system har ikke nok plass igjen for installasjon eller oppgradering (%d "
-"> %d)"
-
-#: ../../install_steps_interactive.pm_.c:499
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Full (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:499
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:499
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Anbefalt (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:505
-msgid "Custom"
-msgstr "Skreddersydd"
-
-#: ../../install_steps_interactive.pm_.c:552
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Vennligst velg lagre eller hente pakkevalg på diskett.\n"
-"Formatet er det samme som for auto_install genererte disketter."
-
-#: ../../install_steps_interactive.pm_.c:555
-msgid "Load from floppy"
-msgstr "Hent fra diskett"
-
-#: ../../install_steps_interactive.pm_.c:557
-msgid "Loading from floppy"
-msgstr "Henter fra disketten"
-
-#: ../../install_steps_interactive.pm_.c:557
-msgid "Package selection"
-msgstr "Pakkevalg"
-
-#: ../../install_steps_interactive.pm_.c:562
-msgid "Insert a floppy containing package selection"
-msgstr "Sett inn en diskett med pakkevalget"
-
-#: ../../install_steps_interactive.pm_.c:574
-msgid "Save on floppy"
-msgstr "Lagre på diskett"
-
-#: ../../install_steps_interactive.pm_.c:635
-msgid "Selected size is larger than available space"
-msgstr "Valgt størrelse er større enn tilgjengelig plass"
-
-#: ../../install_steps_interactive.pm_.c:706
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Hvis du har alle CDene i listen nedenfor, klikk Ok.\n"
-"Hvis du ikke har noen av disse CDene, klikk Avbryt.\n"
-"Hvis bare noen av CDene mangler, fjern disse, klikk så Ok."
-
-#: ../../install_steps_interactive.pm_.c:711
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROMen ved navnet \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:740
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installerer pakke %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:786
-msgid "Post-install configuration"
-msgstr "Konfigurasjon postinstallering"
-
-#: ../../install_steps_interactive.pm_.c:792
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Sett inn en oppstartsdiskett i stasjon %s"
-
-#: ../../install_steps_interactive.pm_.c:798
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Sett inn oppdater moduler disketten i stasjon %s"
-
-#: ../../install_steps_interactive.pm_.c:823
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Du har nå mulighet til å laste ned programvare for kryptering.\n"
-"\n"
-"ADVARSEL:\n"
-"\n"
-"Pga. forskjellige krav som er tillagt denne programvaren og pålagt av "
-"forskjellige\n"
-"myndigheter, bør kunde og/eller sluttbruker av denne programvaren forsikre "
-"seg\n"
-"om at lovene i sin/deres jurisdiksjon tillater han/dem å laste ned, ha i "
-"besittelse\n"
-"og/eller bruke denne programvaren.\n"
-"\n"
-"I tillegg skal kunde og/eller sluttbruker spesielt være oppmerksom på å ikke "
-"bryte\n"
-"lovene i sin/deres jurisdiksjon. Skulle kunde og/eller sluttbruker ikke\n"
-"respektere bestemmelsene av disse lovene, vil han/de pådra seg alvorlige\n"
-"sanksjoner.\n"
-"\n"
-"Under ingen omstendighet skal Mandrakesoft og eller ikke sine produsenter og/"
-"eller\n"
-"leverandører bli holdt ansvarlige for særskilte, indirekte eller tilfeldige\n"
-"skader uansett hva som enn skulle (inkludert, men ikke begrenset til tap av "
-"fortjeneste,\n"
-"forretningsavbrudd, tap av kommersiell data og andre pengemessige tap, og "
-"endelige\n"
-"ansvarsforhold og erstatninger som skal betales ifølge en rettslig\n"
-"avgjørelse) oppstå ut av bruk, besittelse, eller ene og alene nedlastingen\n"
-"av denne programvaren, som kunde og/eller sluttbruker til slutt kan ha\n"
-"tilgang til etter å ha sagt seg enig i og undertegnet fremviste avtale.\n"
-"\n"
-"For spørsmål angående denne avtalen, vennligst kontakt \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:855
-msgid "Choose a mirror from which to get the packages"
-msgstr "Velg et speil som pakkene kan hentes fra"
-
-#: ../../install_steps_interactive.pm_.c:866
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Kontakter speilet for å få en liste over tilgjengelige pakker"
-
-#: ../../install_steps_interactive.pm_.c:869
-msgid "Please choose the packages you want to install."
-msgstr "Vennligst velg pakkene du ønsker å installere."
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "Which is your timezone?"
-msgstr "Hva er din tidsone?"
-
-#: ../../install_steps_interactive.pm_.c:886
-msgid "Hardware clock set to GMT"
-msgstr "Maskinvareklokken din satt til GMT"
-
-#: ../../install_steps_interactive.pm_.c:887
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatisk tidssynkronisering (ved hjelp av NTP)"
-
-#: ../../install_steps_interactive.pm_.c:894
-msgid "NTP Server"
-msgstr "NTP-tjener"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:936 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Fjern-CUPS tjener"
-
-#: ../../install_steps_interactive.pm_.c:929
-msgid "No printer"
-msgstr "Ingen skriver"
-
-#: ../../install_steps_interactive.pm_.c:940 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Oppsummering"
-
-#: ../../install_steps_interactive.pm_.c:943
-msgid "Mouse"
-msgstr "Mus"
-
-#: ../../install_steps_interactive.pm_.c:945
-msgid "Timezone"
-msgstr "Tidssone"
-
-#: ../../install_steps_interactive.pm_.c:946 ../../printerdrake.pm_.c:1806
-#: ../../printerdrake.pm_.c:1877
-msgid "Printer"
-msgstr "Skriver"
-
-#: ../../install_steps_interactive.pm_.c:948
-msgid "ISDN card"
-msgstr "ISDN-kort"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "Sound card"
-msgstr "Lydkort"
-
-#: ../../install_steps_interactive.pm_.c:954
-msgid "TV card"
-msgstr "TV-kort"
-
-#: ../../install_steps_interactive.pm_.c:990
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1018
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:991
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1027
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:992
-#: ../../install_steps_interactive.pm_.c:1014
-msgid "Local files"
-msgstr "Lokale filer"
-
-#: ../../install_steps_interactive.pm_.c:1001
-#: ../../install_steps_interactive.pm_.c:1002 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Sett root-passord"
-
-#: ../../install_steps_interactive.pm_.c:1003
-msgid "No password"
-msgstr "Intet passord"
-
-#: ../../install_steps_interactive.pm_.c:1008
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Dette passordet er for enkelt (må være minst %d tegn langt)"
-
-#: ../../install_steps_interactive.pm_.c:1014 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:621
-msgid "Authentication"
-msgstr "Autentifikasjon"
-
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Authentication LDAP"
-msgstr "Autentisering LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1023
-msgid "LDAP Base dn"
-msgstr "LDAP grunnleggende dn"
-
-#: ../../install_steps_interactive.pm_.c:1024
-msgid "LDAP Server"
-msgstr "LDAP-tjener"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Authentication NIS"
-msgstr "Autentisering NIS"
-
-#: ../../install_steps_interactive.pm_.c:1031
-msgid "NIS Domain"
-msgstr "NIS-domene"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "NIS Server"
-msgstr "NIS-tjener"
-
-#: ../../install_steps_interactive.pm_.c:1067
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"En egendefinert oppstartsdiskett er en måte å starte Linux-systemet på uten\n"
-"å være avhengig av den vanlige oppstartslasteren. Dette er nyttig hvis du "
-"ikke ønsker\n"
-"å installere SILO på systemet ditt, eller et annet operativsystem fjerner "
-"SILO,\n"
-"eller at SILO ikke virker med din maskinvarekonfigurasjon. En egendefinert "
-"oppstartsdiskett\n"
-"kan også brukes sammen med Mandrake's redningsbilde, som gjør det mye "
-"lettere gjenopprette\n"
-"etter systemsvikt.\n"
-"Hvis du ønsker du å opprette en oppstartsdiskett for systemet ditt, sett inn "
-"en diskett\n"
-"i den første stasjonen og trykk \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1083
-msgid "First floppy drive"
-msgstr "Første diskettstasjon"
-
-#: ../../install_steps_interactive.pm_.c:1084
-msgid "Second floppy drive"
-msgstr "Andre diskettstasjon"
-
-#: ../../install_steps_interactive.pm_.c:1085 ../../printerdrake.pm_.c:1412
-msgid "Skip"
-msgstr "Dropp"
-
-#: ../../install_steps_interactive.pm_.c:1090
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"En egendefinert oppstartsdiskett er en måte å starte Linux-systemet på uten\n"
-"å være avhengig av den vanlige oppstartslasteren. Dette er nyttig hvis du "
-"ikke ønsker\n"
-"å installere LILO (eller grub) på systemet ditt, eller et annet "
-"operativsystem fjerner LILO,\n"
-"eller at LILO ikke virker med din maskinvarekonfigurasjon. En egendefinert "
-"oppstartsdiskett\n"
-"kan også brukes sammen med Mandrake's redningsbilde, som gjør det mye "
-"lettere gjenopprette\n"
-"etter systemsvikt. Ønsker du å opprette en oppstartsdiskett for systemet "
-"ditt?"
-
-#: ../../install_steps_interactive.pm_.c:1099
-msgid "Sorry, no floppy drive available"
-msgstr "Beklager, ingen diskettstasjon tilgjengelig"
-
-#: ../../install_steps_interactive.pm_.c:1103
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Velg diskettstasjonen du ønsker å bruke for å lage oppstartsdisketten"
-
-#: ../../install_steps_interactive.pm_.c:1107
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Sett inn en diskett i stasjon %s"
-
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Creating bootdisk"
-msgstr "Oppretter oppstartdiskett"
-
-#: ../../install_steps_interactive.pm_.c:1117
-msgid "Preparing bootloader"
-msgstr "Klargjør oppstartslaster"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Det virker som du har en OldWorld eller ukjent\n"
-"maskin, yaboot oppstartslasteren vil ikke virke for deg.\n"
-"Installasjonen vil fortsette, men du må\n"
-"bruke BootX for å starte din maskin."
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Do you want to use aboot?"
-msgstr "Ønsker du å bruke aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1137
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Feil ved installasjon av aboot, \n"
-"prøve å installere selv om det ødelegger den første partisjonen?"
-
-#: ../../install_steps_interactive.pm_.c:1144
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Installer oppstartslaster"
-
-#: ../../install_steps_interactive.pm_.c:1150
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Installasjon av oppstartslaster mislykket. Følgende feil oppsto:"
-
-#: ../../install_steps_interactive.pm_.c:1158
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1166 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Lav"
-
-#: ../../install_steps_interactive.pm_.c:1167 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Medium"
-
-#: ../../install_steps_interactive.pm_.c:1168 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Høy"
-
-#: ../../install_steps_interactive.pm_.c:1172 ../../standalone/draksec_.c:70
-msgid "Choose security level"
-msgstr "Velg sikkerhetsnivå"
-
-#: ../../install_steps_interactive.pm_.c:1208
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Sett inn en tom diskett i stasjon %s"
-
-#: ../../install_steps_interactive.pm_.c:1212
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Oppretter diskett for autoinstallasjon"
-
-#: ../../install_steps_interactive.pm_.c:1223
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Noen trinn er ikke fullført.\n"
-"\n"
-"Ønsker du virkelig å avslutte nå?"
-
-#: ../../install_steps_interactive.pm_.c:1234
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratulerer, installasjonen er fullført.\n"
-"Fjern oppstartsmediet og trykk return for å starte på nytt.\n"
-"\n"
-"For informasjon om endringer som er tilgjengelige for denne utgaven av "
-"Mandrake Linux,\n"
-"sjekk errataen tilgjengelig fra http://www.mandrakelinux.com/.\n"
-"\n"
-"Informasjon om konfigurering av systemet ditt finnes i post\n"
-"install-kapittelet i Official Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid "Generate auto install floppy"
-msgstr "Oppretter diskett for autoinstallasjon"
-
-#: ../../install_steps_interactive.pm_.c:1248
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Autoinstallasjonen kan være fullstendig automatisk\n"
-"hvis du ønsker det. Den vil da ta over harddisken!!\n"
-"(dette er for å installere på en annen maskin)\n"
-"\n"
-"Du kanskje ønske å kjøre installasjonen omigjen.\n"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Automated"
-msgstr "Automatisert"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Replay"
-msgstr "Gjør igjen"
-
-#: ../../install_steps_interactive.pm_.c:1256
-msgid "Save packages selection"
-msgstr "Lagre pakkevalg"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux installasjon %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> mellom elementer  | <Space> velger | <F12> neste skjerm "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu mangler"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "Velg en fil"
-
-#: ../../interactive.pm_.c:286
-msgid "Advanced"
-msgstr "Avansert"
-
-#: ../../interactive.pm_.c:347
-msgid "Please wait"
-msgstr "Vennligst vent"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Utvid tre"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Trekk sammen tre"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Skift mellom flat og gruppesortert"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Dårlig valg, prøv igjen\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ditt valg? (standard %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ditt valg? (standard %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Valg: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Ønsker du å bruke aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ditt valg? (standard %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-msgid "=> There are many things to choose from ($ll).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:173
-msgid "Czech (QWERTZ)"
-msgstr "Tsjekkisk (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:175
-msgid "German"
-msgstr "Tysk"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:182
-msgid "Spanish"
-msgstr "Spansk"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:183
-msgid "Finnish"
-msgstr "Finsk"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:184
-msgid "French"
-msgstr "Fransk"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:209
-msgid "Norwegian"
-msgstr "Norsk"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Polsk"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:217
-msgid "Russian"
-msgstr "Russisk"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:219
-msgid "Swedish"
-msgstr "Svensk"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:234
-msgid "UK keyboard"
-msgstr "UK-tastatur"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:235
-msgid "US keyboard"
-msgstr "US-tastatur"
-
-#: ../../keyboard.pm_.c:154
-msgid "Albanian"
-msgstr "Albansk"
-
-#: ../../keyboard.pm_.c:155
-msgid "Armenian (old)"
-msgstr "Armensk (gammel)"
-
-#: ../../keyboard.pm_.c:156
-msgid "Armenian (typewriter)"
-msgstr "Armensk (skrivemaskin)"
-
-#: ../../keyboard.pm_.c:157
-msgid "Armenian (phonetic)"
-msgstr "Armensk (phonétic)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjansk (latin)"
-
-#: ../../keyboard.pm_.c:164
-msgid "Belgian"
-msgstr "Belgisk"
-
-#: ../../keyboard.pm_.c:165
-msgid "Bulgarian"
-msgstr "Bulgarisk"
-
-#: ../../keyboard.pm_.c:166
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiliansk (ABNT-2)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Belarusian"
-msgstr "Belarusian"
-
-#: ../../keyboard.pm_.c:168
-msgid "Swiss (German layout)"
-msgstr "Sveisisk (tysk oppsett)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Swiss (French layout)"
-msgstr "Sveisisk (fransk oppsett)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Czech (QWERTY)"
-msgstr "Tsjekkisk (QWERTY)"
-
-#: ../../keyboard.pm_.c:176
-msgid "German (no dead keys)"
-msgstr "Tysk (ingen døde taster)"
-
-#: ../../keyboard.pm_.c:177
-msgid "Danish"
-msgstr "Dansk"
-
-#: ../../keyboard.pm_.c:178
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norsk)"
-
-#: ../../keyboard.pm_.c:180
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:181
-msgid "Estonian"
-msgstr "Estlandsk"
-
-#: ../../keyboard.pm_.c:185
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgisk (\"Russisk\" oppsett)"
-
-#: ../../keyboard.pm_.c:186
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgisk (\"Latinsk\" oppsett)"
-
-#: ../../keyboard.pm_.c:187
-msgid "Greek"
-msgstr "Gresk"
-
-#: ../../keyboard.pm_.c:188
-msgid "Hungarian"
-msgstr "Ungarsk"
-
-#: ../../keyboard.pm_.c:189
-msgid "Croatian"
-msgstr "Kroatisk"
-
-#: ../../keyboard.pm_.c:190
-msgid "Israeli"
-msgstr "Israelsk"
-
-#: ../../keyboard.pm_.c:191
-msgid "Israeli (Phonetic)"
-msgstr "Israelsk (Phonetic)"
-
-#: ../../keyboard.pm_.c:192
-msgid "Iranian"
-msgstr "Iransk"
-
-#: ../../keyboard.pm_.c:193
-msgid "Icelandic"
-msgstr "Islansk"
-
-#: ../../keyboard.pm_.c:194
-msgid "Italian"
-msgstr "Italiensk"
-
-#: ../../keyboard.pm_.c:196
-msgid "Japanese 106 keys"
-msgstr "Japansk 106 taster"
-
-#: ../../keyboard.pm_.c:199
-msgid "Korean keyboard"
-msgstr "Koreansk tastatur"
-
-#: ../../keyboard.pm_.c:200
-msgid "Latin American"
-msgstr "Latinamerikansk"
-
-#: ../../keyboard.pm_.c:201
-msgid "Lithuanian AZERTY (old)"
-msgstr "Liauisk AZERTY (gammel)"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (new)"
-msgstr "Liauisk AZERTY (ny)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litauisk \"nummer-rekke\" QWERTY"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litauisk \"phonétic\" QWERTY"
-
-#: ../../keyboard.pm_.c:206
-#, fuzzy
-msgid "Latvian"
-msgstr "Lokasjon"
-
-#: ../../keyboard.pm_.c:207
-msgid "Macedonian"
-msgstr "Makedonsk"
-
-#: ../../keyboard.pm_.c:208
-msgid "Dutch"
-msgstr "Hollansk"
-
-#: ../../keyboard.pm_.c:210
-msgid "Polish (qwerty layout)"
-msgstr "Polsk (qwerty oppsett)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Polish (qwertz layout)"
-msgstr "Polsk (qwertz oppsett)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Portuguese"
-msgstr "Portugisisk"
-
-#: ../../keyboard.pm_.c:213
-msgid "Canadian (Quebec)"
-msgstr "Canadisk (Quebec)"
-
-#: ../../keyboard.pm_.c:215
-msgid "Romanian (qwertz)"
-msgstr "Romansk (qwertz)"
-
-#: ../../keyboard.pm_.c:216
-msgid "Romanian (qwerty)"
-msgstr "Romansk (qwerty)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Russian (Yawerty)"
-msgstr "Russisk (Yawerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Slovenian"
-msgstr "Slovensk"
-
-#: ../../keyboard.pm_.c:224
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakisk (QWERTZ)"
-
-#: ../../keyboard.pm_.c:225
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakisk (QWERTY)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Serbian (cyrillic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:228
-msgid "Thai keyboard"
-msgstr "Thai-tastatur"
-
-#: ../../keyboard.pm_.c:230
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Thai-tastatur"
-
-#: ../../keyboard.pm_.c:231
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Tyrkisk (tradisjonell \"F\" modell)"
-
-#: ../../keyboard.pm_.c:232
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Tyrkisk (moderne \"Q\" modell)"
-
-#: ../../keyboard.pm_.c:233
-msgid "Ukrainian"
-msgstr "Ukrainsk"
-
-#: ../../keyboard.pm_.c:236
-msgid "US keyboard (international)"
-msgstr "US-tastatur (internasjonal)"
-
-#: ../../keyboard.pm_.c:237
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamesisk \"nummer-rekke\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Azerbaidjansk (latin)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Rund monterer %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Fjern de logiske partisjoner først\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun-mus"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generisk PS2 hjulmus"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 knapp"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Generisk"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Hjul"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "seriell"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Generisk 2-knappers mus"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Generisk 3-knappers mus"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC-seriene (seriell)"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM-seriene"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (seriell, gammel C7 type)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "bussmus"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 knapper"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 knapper"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "ingen"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Ingen mus"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Vennligst test musen."
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "For å aktivere musen,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEVEG HJULET DITT!"
-
-#: ../../my_gtk.pm_.c:385
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:420
-msgid "Finish"
-msgstr "Avslutt"
-
-#: ../../my_gtk.pm_.c:420
-msgid "Next ->"
-msgstr "Neste ->"
-
-#: ../../my_gtk.pm_.c:421
-msgid "<- Previous"
-msgstr "<- Forrige"
-
-#: ../../my_gtk.pm_.c:721
-msgid "Is this correct?"
-msgstr "Er dette riktig?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Koble opp mot Internett"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Den mest vanlige måten å koble opp med adsl er pppoe.\n"
-"Noen oppkoblinger bruker pptp, noen få bruker dhcp.\n"
-"Hvis du ikke vet, velg 'bruk pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-#, fuzzy
-msgid "Alcatel speedtouch usb"
-msgstr "speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "bruk dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "bruk pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "bruk pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Hvilken dhcp klient ønsker du å bruke?\n"
-"Standard er dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ikke noe ethernet nettverksadapter har blitt oppdaget i systemet ditt.\n"
-"Jeg kan ikke sette opp denne tilkoblingstypen."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Velg nettverksgrensesnitt"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Vennligst velg hvilket nettverksadapter du ønsker å bruke til å koble opp\n"
-"mot Internett"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ingen nettverkskort funnet"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Konfigurerer nettverk"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Vennligst entre vertsnavnet ditt hvis du vet det.\n"
-"Noen DHCP tjenere trenger vertsnavnet for å virke.\n"
-"Vertsnavnet ditt bør være et full-kvalifisert vertsnavn,\n"
-"som ``minboks.mittlab.mittfirma.no''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Vertsnavn"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Nettverkskonfigurasjonveiviser"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Eksternt ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Internt ISDN-kort"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Hva slags type er ISDN-tilknytningen din?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Hvilken ISDN konfigurering foretrekker du?\n"
-"\n"
-"* Den gamle konfigurasjoen bruker isdn4net. Det har kraftfulle\n"
-"  verktøy, den det er vanskelig å konfigurere for en nybegynner,\n"
-"  og er ikke standardbasert.\n"
-"\n"
-"' Det nye konfigurasjonsverktøyet er enklere å forstå,\n"
-"  mer standardisert, men med færre verktøy.\n"
-"\n"
-"Vi anbefaler den nye konfigurasjonen.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Ny konfigurasjon (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Gamle konfigurasjonen (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN-konfigurasjon"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Velg din tilbyder.\n"
-" Hvis denne ikke er i listen, velg ikke i listen"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europaprotokollen"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Europaprotokollen (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokoll for resten av verden"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Resten av verden \n"
-" ingen D-kanal (leid linje)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Hvilken protokoll ønsker du å bruke?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Hva slags kort har du?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Jeg vet ikke"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Hvis du har et ISA kort burde verdiene i neste bilde være riktige.\n"
-"\n"
-"Hvis du har et PCMCIA kort må du vite irq og io for kortet.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Avbryt"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Fortsett"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Hvilket er ditt ISDN-kort?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Jeg har oppdaget et ISDN PCI-kort, men jeg vet ikke hviklet type. Vennligst "
-"velg et PCI-kort i neste skjermbilde."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Ingen ISDN PCI-kort funnet. Vennligst velg et i neste skjermbilde."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Vennligst velg hvilken serieport modemet ditt koblet til."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Opsjoner oppringt"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:617
-msgid "Connection name"
-msgstr "Navn tilknytning"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:618
-msgid "Phone number"
-msgstr "Telefonnummer"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:619
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:621
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:621
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:621
-msgid "Script-based"
-msgstr "Scriptbasert"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:621
-msgid "Terminal-based"
-msgstr "Terminalbasert"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:622
-msgid "Domain name"
-msgstr "Domenenavn"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:623
-msgid "First DNS Server (optional)"
-msgstr "Første DNS-tjener (valgfri)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:624
-msgid "Second DNS Server (optional)"
-msgstr "Andre DNS-tjener (valgfri)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan koble ned eller rekonfigurere tilkoblingen din."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan rekonfigurere tilkoblingen din."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Du er for øyeblikket koblet opp mot Internett"
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan koble opp mot Internett eller rekonfigurere tilkoblingen din."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Du er for øyeblikket ikke koblet opp mot Internett."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Koble opp mot Internett"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Koble ned fra Internett"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Konfigurer nettverk-tilkobling (LAN eller Internett)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Internett tilkobling & konfigurasjon"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Vi skal nå konfigurere din  %s tilkobling."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Vi skal nå konfigurere %s oppkoblingen.\n"
-"\n"
-"\n"
-"Trykk OK for å begynne."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Nettverkskonfigurasjon"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Fordi du holder på med en nettverksinstallasjon er ditt "
-"nettverksoppsettallerede konfigurert.\n"
-"Trykk OK for å beholde din eksisterende konfigurasjon, eller avbryt for å "
-"rekonfigurere din internett og nettverkskonfigurasjon.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Velkommen til nettverkskonfigurasjon hjelperen\n"
-"\n"
-"Vi skal nå konfigurere din internett/nettverksoppkobling.\n"
-"Hvis du ikke ønsker å bruke automatisk oppdagelse, fjern krysset\n"
-"i boksen.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Velg profilen som skal konfigureres"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Bruk automatisk detektering"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Finner enheter..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Normal modemtilkobling"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "oppdaget på port %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN-tilkobling"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "oppdaget %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ADSL oppkobling"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "oppdaget på grensesnitt %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Kabeltilkobling"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "Kabeltilkobling detektert"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "Lokalt nettverksoppkobling"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "oppdaget ethernettkort"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Velg oppkoblingen du ønsker å konfigurere"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Du har konfigureret flere måter å koble deg mot internett på.\n"
-"Venligst velg den du ønsker å bruker.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Internett tilkobling"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Ønsker du å starte tilkoblingen din ved oppstart?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Nettverkskonfigurasjon"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Et problem oppsto ved omstart av nettverket: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Gratulerer, internett og nettverkskonfigurasjonen er fullført.\n"
-"\n"
-"Konfigurasjonen vil nå bli aktivert.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Etter at det er ferding, anbefaler vi at du restarter X\n"
-"slik at du unngår problemer med at vertsnavnet forandres."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ADVARSEL: Denne enheten har tidligere blitt konfigurert til å koble opp mot "
-"Internett.\n"
-"Trykk OK for å beholde enhetens konfigurasjon.\n"
-"Modifisering av feltene nedenfor vil overskrive denne konfigurasjonen."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Vennligst entre IP-konfigurasjonen for denne maskinen.\n"
-"Hvert element bør entres som en IP-adresse i punkt-desimal\n"
-"notasjon (f.eks, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurerer nettverksenhet %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:258
-#: ../../standalone/draknet_.c:471
-msgid "IP address"
-msgstr "IP-adresse"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:472
-msgid "Netmask"
-msgstr "Nettmaske"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Automatisk IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:422
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adresse bør være i format 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Vennligst entre vertsnavnet ditt.\n"
-"Vertsnavnet ditt bør være et full-kvalifisert vertsnavn,\n"
-"så som ``minboks.mittlab.mittfirma.no''.\n"
-"Du kan også entre IP-adressen til gateway'en hvis du har en"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS-tjener"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:616
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Gateway-enhet"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Konfigurasjon proxy"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP-proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP-proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Proxy burde være http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Proxy burde være ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internett-konfigurasjon"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Vil du prøve å koble opp mot Internett nå?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:190
-#: ../../standalone/draknet_.c:196
-msgid "Testing your connection..."
-msgstr "Tester tilkoblingen din..."
-
-#: ../../network/tools.pm_.c:50 ../../standalone/draknet_.c:223
-msgid "The system is now connected to Internet."
-msgstr "Systemet er nå koblet opp mot Internett."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Av sikkerhetsgrunner vil den bli frakoblet nå."
-
-#: ../../network/tools.pm_.c:52 ../../standalone/draknet_.c:223
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Det ser ikke ut til at systemet er koblet til Internett.\n"
-"Prøv å rekonfigurere tilkoblingen din."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konfigurasjon tilknytning."
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Vennnligst fyll eller merk feltet under"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:603
-msgid "Card IRQ"
-msgstr "Kort IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:604
-msgid "Card mem (DMA)"
-msgstr "Kort mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:605
-msgid "Card IO"
-msgstr "Kort IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:606
-msgid "Card IO_0"
-msgstr "Kort IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:607
-msgid "Card IO_1"
-msgstr "Kort IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:608
-msgid "Your personal phone number"
-msgstr "Ditt telefonnummer"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:609
-msgid "Provider name (ex provider.net)"
-msgstr "Navn tilbyder (f.eks. tilbyder.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:610
-msgid "Provider phone number"
-msgstr "Telefonnummer tilbyder"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:611
-msgid "Provider dns 1 (optional)"
-msgstr "Tilbyder dns 1 (valgfri)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:612
-msgid "Provider dns 2 (optional)"
-msgstr "Tilbyder dns 2 (valgfri)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Velg land"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:615
-msgid "Dialing mode"
-msgstr "Oppringningsmodus"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:627
-msgid "Connection speed"
-msgstr "Oppkoblingshastighet"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:628
-msgid "Connection timeout (in sec)"
-msgstr "Oppkoblingens timout (i sekunder)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:613
-msgid "Account Login (user name)"
-msgstr "Logg inn (brukernavn)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:614
-msgid "Account Password"
-msgstr "Passord"
-
-#: ../../partition_table.pm_.c:642
-msgid "Extended partition not supported on this platform"
-msgstr "Utvidet partisjon ikke støttet på denne plattformen"
-
-#: ../../partition_table.pm_.c:660
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Du har et hull i partisjonstabellen din, men jeg kan ikke bruke det.\n"
-"Den eneste løsningen er å flytte primærpartisjonene dine for å ha hullet ved "
-"siden av de utvidede partisjonene"
-
-#: ../../partition_table.pm_.c:748
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Gjenoppretting fra fil %s mislykket: %s"
-
-#: ../../partition_table.pm_.c:750
-msgid "Bad backup file"
-msgstr "Dårlig sikkerhetskopi-fil"
-
-#: ../../partition_table.pm_.c:772
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Feil ved skriving til fil %s"
-
-#: ../../partition_table_raw.pm_.c:185
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Noe som ikke er bra skjer med disken din. \n"
-"En test for å sjekke dataintegritet var mislykket. \n"
-"Dette betyr at å skrive noe til disken vil av og til ende opp som ubrukelig"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "må ha"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "viktig"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "veldig bra"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bra"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "kanskje"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Lokal skriver"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Fjern-skriver"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "Skriver på fjern-CUPS tjener"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "Skriver på fjern-lpd tjener"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Nettverksskriver (socket)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Skriver på SMB/Windows 95/98/NT server"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "Skriver på en NetWare tjener"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "Skriverenhetens URI"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "Pipe inn i kommando"
-
-#: ../../printer.pm_.c:424 ../../printer.pm_.c:555 ../../printer.pm_.c:845
-#: ../../printerdrake.pm_.c:1257 ../../printerdrake.pm_.c:2056
-msgid "Unknown model"
-msgstr "Ukjent modell"
-
-#: ../../printer.pm_.c:552 ../../printerdrake.pm_.c:811
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:699
-#, c-format
-msgid "(on %s)"
-msgstr "(på %s)"
-
-#: ../../printer.pm_.c:701
-msgid "(on this machine)"
-msgstr "(på denne maskin)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Velg skrivertilkobling"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hvordan er skriveren tilkoblet?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"Med en fjern-CUPS tjener behøver du ikke å konfigurere\n"
-"noen skrivere her; skrivere vil bli oppdaget automatisk.\n"
-"Vennligst velg \"Skriver på en fjern-CUPS tjener\" i dette tilfellet."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-#, fuzzy
-msgid "None"
-msgstr "Ferdig"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Velg standard bruker:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-"Med en fjern-CUPs tjener trenger du ikke å konfigurere noen\n"
-"skrivere her; CUPS-tjenere gir din maskin informasjon om \n"
-"skriverne automatisk. Alle skrivere som for øyeblikket er kjent\n"
-"for din maskin vil være under \"Standardskriver\". Velg standard-\n"
-"skriveren du ønsker, og klikk på \"Bruk/Les skriverlisten\" knappen. \n"
-"Trykk på den samme listen for å oppfriske listen. (det kan ta opptil 30\n"
-"sekunder fra CUPS starter til alle skrivere er tilgjengelige).\n"
-"Når din CUPS-tjener er på et annen nettverk må du oppgi\n"
-"CUPS-tjenerens IPa ddresse og eventuelle portnummer for å få\n"
-"skriverinformasjon fra tjeneren, ellers kan du la de feltene være blanke."
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1320
-#: ../../printerdrake.pm_.c:1324 ../../printerdrake.pm_.c:1325
-#: ../../printerdrake.pm_.c:1326 ../../printerdrake.pm_.c:2044
-msgid "Close"
-msgstr "Lukk"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "Bruk/Oppfrisk skriverliste"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-adresse bør være i format 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:557
-msgid "The port number should be an integer!"
-msgstr "Portnummer burde være numerisk"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2128
-msgid "Default printer"
-msgstr "Standardskriver"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "CUPS tjener IP"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:550
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Konfigurasjon av automatiske skritt"
-
-#: ../../printerdrake.pm_.c:217 ../../standalone/scannerdrake_.c:40
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Finner enheter..."
-
-#: ../../printerdrake.pm_.c:217 ../../standalone/scannerdrake_.c:40
-msgid "Test ports"
-msgstr "Test porter"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "En skriver, modell \"%s\", ble funnet på "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Lokal skriverenhet"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Hvilken enhet er skriveren din koblet til \n"
-"(merk at /dev/lp0 er det samme som LPT1:)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Skriverenhet"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "Enhets/filnavn mangler!"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:714
-#: ../../printerdrake.pm_.c:807
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Leser skriverdata: ..."
-
-#: ../../printerdrake.pm_.c:328
-msgid "Remote lpd Printer Options"
-msgstr "Opsjoner for fjern-lpd skriver"
-
-#: ../../printerdrake.pm_.c:329
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"For å bruke en fjern-lpd skriverkø, må du oppgi vertsnavnet\n"
-"til skrivertjeneren og kønavnet på den tjeneren som\n"
-"jobbene skal plasseres i."
-
-#: ../../printerdrake.pm_.c:332
-msgid "Remote host name"
-msgstr "Fjern-vertsnavn"
-
-#: ../../printerdrake.pm_.c:333
-msgid "Remote printer name"
-msgstr "Fjern-skrivers navn"
-
-#: ../../printerdrake.pm_.c:336
-msgid "Remote host name missing!"
-msgstr "Det eksterne vertsnavnet mangler!"
-
-#: ../../printerdrake.pm_.c:340
-msgid "Remote printer name missing!"
-msgstr "Det eksterne vertsnavnet mangler!"
-
-#: ../../printerdrake.pm_.c:408
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opsjoner for SMB (Windows 9x/NT) skriver"
-
-#: ../../printerdrake.pm_.c:409
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"For å skrive til en SMB-skriver, må du oppgi SMB-vertsnavnet\n"
-"(Merk! Dette kan være forskjellig fra dens TCP/IP-vertsnavn!)\n"
-"og muligens IP-adressen til skrivertjeneren, så vel som det delte\n"
-"navnet til skriveren du ønsker tilgang til og anvendelige brukernavn,\n"
-"passord og arbeidsgruppeinformasjon."
-
-#: ../../printerdrake.pm_.c:414
-msgid "SMB server host"
-msgstr "SMB-tjener vert"
-
-#: ../../printerdrake.pm_.c:415
-msgid "SMB server IP"
-msgstr "SMB-tjener IP"
-
-#: ../../printerdrake.pm_.c:416
-msgid "Share name"
-msgstr "Navn deling"
-
-#: ../../printerdrake.pm_.c:419
-msgid "Workgroup"
-msgstr "Arbeidsgruppe"
-
-#: ../../printerdrake.pm_.c:426
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Servernavnet eller serverens IP må oppgis!"
-
-#: ../../printerdrake.pm_.c:430
-msgid "Samba share name missing!"
-msgstr "Samba delenavn mangler!"
-
-#: ../../printerdrake.pm_.c:489
-msgid "NetWare Printer Options"
-msgstr "NetWare skriveropsjoner"
-
-#: ../../printerdrake.pm_.c:490
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"For å skrive til en NetWare-skriver, må du oppgi navnet til NetWare-\n"
-"skrivertjeneren (Mer! Dette kan være forskjellig fra dens TCP/IP-\n"
-"vertsnavn!) så vel som navnet på skriverkøen til skriveren du ønsker\n"
-"adgang til og anvendelige brukernavn og passord."
-
-#: ../../printerdrake.pm_.c:494
-msgid "Printer Server"
-msgstr "Skrivertjener"
-
-#: ../../printerdrake.pm_.c:495
-msgid "Print Queue Name"
-msgstr "Skriverkø-navn"
-
-#: ../../printerdrake.pm_.c:500
-msgid "NCP server name missing!"
-msgstr "NCP servernavn mangler!"
-
-#: ../../printerdrake.pm_.c:504
-msgid "NCP queue name missing!"
-msgstr "NCP kønavn mangler!"
-
-#: ../../printerdrake.pm_.c:543
-msgid "Socket Printer Options"
-msgstr "Opsjoner for lokal skriver"
-
-#: ../../printerdrake.pm_.c:544
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"For å skrive til en socket skriver, trenger du å gi meg\n"
-"vertsnavnet til skriveren, og eventuelt portnummer.\n"
-"På en HP JetDirect tjener er portnummeret vanligvis\n"
-"9100, på andre tjenere varierer det. Sjekk manualen til\n"
-"din tjener."
-
-#: ../../printerdrake.pm_.c:549
-msgid "Printer host name"
-msgstr "Skriverens vertsnavn"
-
-#: ../../printerdrake.pm_.c:553
-msgid "Printer host name missing!"
-msgstr "Skriverens vertsnavn mangler!"
-
-#: ../../printerdrake.pm_.c:582 ../../printerdrake.pm_.c:584
-msgid "Printer Device URI"
-msgstr "Skriverenhet URI"
-
-#: ../../printerdrake.pm_.c:583
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Du kan direkte oppgi URI til skriveren. URIen må være i henhold til enten "
-"CUPS eller Foomatic standarden. Ikke alle typer URIer støttes av "
-"købehandlerene."
-
-#: ../../printerdrake.pm_.c:598
-msgid "A valid URI must be entered!"
-msgstr "En korrekt URI må oppgis!"
-
-#: ../../printerdrake.pm_.c:698
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Alle skrivere trenger ett navn (f.eks. lp).\n"
-"Beskrivelsen og lokalisasjonsfeltene trenger ikke \n"
-"å fylles inn. De er brukerkommentarer."
-
-#: ../../printerdrake.pm_.c:701
-msgid "Name of printer"
-msgstr "Navn på skriver"
-
-#: ../../printerdrake.pm_.c:702
-msgid "Description"
-msgstr "Beskrivelse"
-
-#: ../../printerdrake.pm_.c:703
-msgid "Location"
-msgstr "Lokasjon"
-
-#: ../../printerdrake.pm_.c:717
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Leser skriverdata: ..."
-
-#: ../../printerdrake.pm_.c:814
-msgid "Printer model selection"
-msgstr "Skrivervalg"
-
-#: ../../printerdrake.pm_.c:815
-msgid "Which printer model do you have?"
-msgstr "Hva slags type skriver har du?"
-
-#: ../../printerdrake.pm_.c:816
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the \n"
-"auto-detection of your printer model\n"
-"correctly. Search the correct model in the\n"
-"list when the cursor is standing on a \n"
-"wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:896
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Modifiser skriverkonfigurasjon"
-
-#: ../../printerdrake.pm_.c:897
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:946 ../../printerdrake.pm_.c:976
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Internett-konfigurasjon"
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:977
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1109
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"Standardskriverens instillinger\n"
-"Du bør sjekke at sidestørrelsen og blekktypen\n"
-"er satt riktig. Merk deg at veldig god utskriftskvalitet\n"
-"kan gjøre utskriften treg."
-
-#: ../../printerdrake.pm_.c:1120
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Valg %s må være ett helt tall!"
-
-#: ../../printerdrake.pm_.c:1124
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Valg %s må være ett tall!"
-
-#: ../../printerdrake.pm_.c:1129
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Valg %s er utenfor rekkevidden!"
-
-#: ../../printerdrake.pm_.c:1166
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Ønsker du virkelig å fjerne skriveren \"%s\"?"
-
-#: ../../printerdrake.pm_.c:1182
-msgid "Test pages"
-msgstr "Testsider"
-
-#: ../../printerdrake.pm_.c:1183
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"Vennligst velg testsidene du ønsker å skrive ut.\n"
-"Merk deg, fototestsiden kan ta lang tid å skrive ut,\n"
-"og på laserskrivere med for lite minne vil den ikke\n"
-"skrives ut i det hele tatt. Som regel vil det holde å\n"
-"skrive ut standard testside."
-
-#: ../../printerdrake.pm_.c:1188
-msgid "No test pages"
-msgstr "Ingen testsider"
-
-#: ../../printerdrake.pm_.c:1189
-msgid "Print"
-msgstr "Skriv ut"
-
-#: ../../printerdrake.pm_.c:1191
-msgid "Standard test page"
-msgstr "Standard testside"
-
-#: ../../printerdrake.pm_.c:1194
-msgid "Alternative test page (Letter)"
-msgstr "Alternativ testside (letter)"
-
-#: ../../printerdrake.pm_.c:1197
-msgid "Alternative test page (A4)"
-msgstr "Alternativ testside (A4)"
-
-#: ../../printerdrake.pm_.c:1199
-msgid "Photo test page"
-msgstr "Fototestside"
-
-#: ../../printerdrake.pm_.c:1205 ../../printerdrake.pm_.c:1327
-msgid "Printing test page(s)..."
-msgstr "Skriver ut testside(r)..."
-
-#: ../../printerdrake.pm_.c:1230
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testsiden(e) har blitt sendt til skriver-daemonen.\n"
-"Det kan ta litt tid før skriveren starter.\n"
-"Utskriftstatus:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1234
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testsiden(e) har blitt sendt til skriver-daemonen.\n"
-"Det kan ta litt tid før skriveren starter.\n"
-
-#: ../../printerdrake.pm_.c:1241
-msgid "Did it work properly?"
-msgstr "Virker det som det skal?"
-
-#: ../../printerdrake.pm_.c:1259 ../../printerdrake.pm_.c:2058
-#, fuzzy
-msgid "Raw printer"
-msgstr "Ingen skriver"
-
-#: ../../printerdrake.pm_.c:1267
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1269
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1272 ../../printerdrake.pm_.c:1284
-#: ../../printerdrake.pm_.c:1296
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1274 ../../printerdrake.pm_.c:1314
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1279 ../../printerdrake.pm_.c:1291
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281 ../../printerdrake.pm_.c:1293
-#: ../../printerdrake.pm_.c:1305
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1286 ../../printerdrake.pm_.c:1298
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1303
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1307
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1311
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1322
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Tar ned nettverket"
-
-#: ../../printerdrake.pm_.c:1324
-#, fuzzy
-msgid "Print option list"
-msgstr "Opsjoner for skriver"
-
-#: ../../printerdrake.pm_.c:1348 ../../printerdrake.pm_.c:1774
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "Leser skriverdata: ..."
-
-#: ../../printerdrake.pm_.c:1368 ../../printerdrake.pm_.c:1406
-#: ../../printerdrake.pm_.c:1441
-msgid "Transfer printer configuration"
-msgstr "Overfør skriverkonfigurasjon"
-
-#: ../../printerdrake.pm_.c:1369
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-"Du kan kopiere skriverkonfigurasjonen du har satt opp for køtjeneren\n"
-"%s til %s, din nåværende køtjener. All konfigurasjonsdata (skrivernavn,\n"
-"beskrivelse, tilkoblingstype og standardinstillinger) blir overtatt, men \n"
-"ikke jobber.\n"
-"Ikke alle køer kan overføres grunnet:\n"
-
-#: ../../printerdrake.pm_.c:1377
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-"CUPS støtter ikke skrivere på Novelltjenere eller skrivere som\n"
-"sender dataene inn i en fritt formet kommando.\n"
-
-#: ../../printerdrake.pm_.c:1380
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-"PDQ støtter bare lokale skrivere, fjern-LPD skrivere, og\n"
-"Socket/TCP skrivere.\n"
-
-#: ../../printerdrake.pm_.c:1383
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD og LPRng støtter ikke IPP skrivere.\n"
-
-#: ../../printerdrake.pm_.c:1385
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-"I tillegg, køer laget med dette programmet\n"
-"eller \"foomatic -configure\" kan ikke overflyttes."
-
-#: ../../printerdrake.pm_.c:1387
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-"\n"
-"Skrivere konfigurert med PPD filene som produsenten har\n"
-"laget eller med CUPS drivere ikke ikke overflyttes."
-
-#: ../../printerdrake.pm_.c:1390
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Velg skriverene som du vil overflytte og klikk\n"
-"\"Overfør\"."
-
-#: ../../printerdrake.pm_.c:1393
-msgid "Do not transfer printers"
-msgstr "Ikke overfør skrivere"
-
-#: ../../printerdrake.pm_.c:1394 ../../printerdrake.pm_.c:1411
-msgid "Transfer"
-msgstr "Overfør"
-
-#: ../../printerdrake.pm_.c:1407
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"En skriver med navnet \"%s\" eksisterer allerede på %s. \n"
-"Klikk \"Overfør\" for å overskrive.\n"
-"Du kan også gi ett nytt skrivernavn, eller hoppe over denne skriveren."
-
-#: ../../printerdrake.pm_.c:1415
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Skrivernavn bør inneholde kun bokstaver, tall og understrek"
-
-#: ../../printerdrake.pm_.c:1420
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Skriveren \"%s\" eksisterer allerede,\n"
-"ønsker du å overskrive dens konfigurasjon?"
-
-#: ../../printerdrake.pm_.c:1428
-msgid "New printer name"
-msgstr "Nytt skrivernavn"
-
-#: ../../printerdrake.pm_.c:1431
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Overfører %s ..."
-
-#: ../../printerdrake.pm_.c:1442
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1453
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Leser skriverdata: ..."
-
-#: ../../printerdrake.pm_.c:1461 ../../printerdrake.pm_.c:1524
-#: ../../printerdrake.pm_.c:1545
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Konfigurasjon Lilo/Grub"
-
-#: ../../printerdrake.pm_.c:1462
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Starter tilkoblingen din..."
-
-#: ../../printerdrake.pm_.c:1484 ../../printerdrake.pm_.c:1492
-#: ../../printerdrake.pm_.c:1494
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Konfigurer nettverk"
-
-#: ../../printerdrake.pm_.c:1485
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor er ikke konfigurert"
-
-#: ../../printerdrake.pm_.c:1486
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1493
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Konfigurerer nettverk"
-
-#: ../../printerdrake.pm_.c:1526
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1533
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1546
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Leser skriverdata: ..."
-
-#: ../../printerdrake.pm_.c:1578
-#, fuzzy
-msgid "high"
-msgstr "Høy"
-
-#: ../../printerdrake.pm_.c:1578
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoid"
-
-#: ../../printerdrake.pm_.c:1579
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1580
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1614
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1615
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1642 ../../printerdrake.pm_.c:1674
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1731
-#: ../../printerdrake.pm_.c:1811
-msgid "Checking installed software..."
-msgstr "Sjekker installert programvare..."
-
-#: ../../printerdrake.pm_.c:1678
-msgid "Removing LPRng..."
-msgstr "Fjerner LPRng..."
-
-#: ../../printerdrake.pm_.c:1705
-msgid "Removing LPD..."
-msgstr "Fjerner LPD..."
-
-#: ../../printerdrake.pm_.c:1760
-msgid "Select Printer Spooler"
-msgstr "Velg skrivertkøbehandler"
-
-#: ../../printerdrake.pm_.c:1761
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hvilket utskriftsystem (spooler) ønsker du å bruke?"
-
-#: ../../printerdrake.pm_.c:1792
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigurer skriver"
-
-#: ../../printerdrake.pm_.c:1839 ../../printerdrake.pm_.c:1871
-#: ../../printerdrake.pm_.c:2059 ../../printerdrake.pm_.c:2121
-msgid "Printer options"
-msgstr "Opsjoner for skriver"
-
-#: ../../printerdrake.pm_.c:1848
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Leser skriverdata: ..."
-
-#: ../../printerdrake.pm_.c:1878
-msgid "Would you like to configure printing?"
-msgstr "Ønsker du å konfigurere en skriver?"
-
-#: ../../printerdrake.pm_.c:1890
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1912
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1918 ../../standalone/draknet_.c:304
-msgid "Normal Mode"
-msgstr "Normalt modus"
-
-#: ../../printerdrake.pm_.c:1924 ../../printerdrake.pm_.c:2043
-msgid " (Default)"
-msgstr " (Standard)"
-
-#: ../../printerdrake.pm_.c:1928 ../../printerdrake.pm_.c:1968
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Skriver på fjern-CUPS tjener"
-
-#: ../../printerdrake.pm_.c:1929 ../../printerdrake.pm_.c:1969
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "Skriver på fjern-CUPS tjener"
-
-#: ../../printerdrake.pm_.c:1931 ../../printerdrake.pm_.c:1952
-#: ../../printerdrake.pm_.c:1955 ../../printerdrake.pm_.c:2004
-msgid "Add printer"
-msgstr "Legg til skriver"
-
-#: ../../printerdrake.pm_.c:2010 ../../printerdrake.pm_.c:2026
-#: ../../printerdrake.pm_.c:2161
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Vil du teste konfigurasjonen?"
-
-#: ../../printerdrake.pm_.c:2036
-msgid "Modify printer configuration"
-msgstr "Modifiser skriverkonfigurasjon"
-
-#: ../../printerdrake.pm_.c:2037
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Skriver %s %s %s\n"
-"Hva ønsker du å forandre på, på denne maskinen?"
-
-#: ../../printerdrake.pm_.c:2045
-msgid "Do it!"
-msgstr "Gjør det!"
-
-#: ../../printerdrake.pm_.c:2048 ../../printerdrake.pm_.c:2095
-msgid "Printer connection type"
-msgstr "Skrivertilkoblingstype"
-
-#: ../../printerdrake.pm_.c:2049 ../../printerdrake.pm_.c:2099
-msgid "Printer name, description, location"
-msgstr "Skrivernavn, beskrivelse, sted"
-
-#: ../../printerdrake.pm_.c:2051 ../../printerdrake.pm_.c:2114
-msgid "Printer manufacturer, model, driver"
-msgstr "Skriverprodusent, modell, driver"
-
-#: ../../printerdrake.pm_.c:2052 ../../printerdrake.pm_.c:2115
-msgid "Printer manufacturer, model"
-msgstr "Skriverprodusent, modell"
-
-#: ../../printerdrake.pm_.c:2061 ../../printerdrake.pm_.c:2125
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2062 ../../printerdrake.pm_.c:2130
-msgid "Print test pages"
-msgstr "Skriver ut testsider"
-
-#: ../../printerdrake.pm_.c:2063 ../../printerdrake.pm_.c:2132
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2064 ../../printerdrake.pm_.c:2134
-msgid "Remove printer"
-msgstr "Fjern skriver"
-
-#: ../../printerdrake.pm_.c:2104
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Leser skriverdata: ..."
-
-#: ../../printerdrake.pm_.c:2129
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2136
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ønsker du virkelig å fjerne skriveren \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2138
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Leser skriverdata: ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy-konfigurasjon"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Velkommen til proxy-konfigurasjonsverktøyet.\n"
-"\n"
-"Her kan du sette opp dine http og ftp proxier\n"
-"med eller uten brukernavn og passord\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Vennligst fill ut med http proxy informasjon\n"
-"La feltet være hvis du ikke ønsker en http proxy"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URLen bør begynne med \"http:\""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Portnummer burde være numerisk"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Vennligst fyll ut ftp-proxy informasjonen-nLa feltet være hvis du ikke "
-"ønsker en ftp-proxy"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URLen bør begynne med \"ftp:\""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Vennligst skriv inn proxy brukernavn og passord, hvis det eksisterer.\n"
-"La det være hvis du ikke ønsker brukernavn/passord"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "brukernavn"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "passord"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "skriv inn passord på nytt"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Passordene stemmer ikke overens. Prøv igjen!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan ikke legge til en partisjon til _formattert_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Kan ikke skrive fil %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid mislykket"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid mislykket (kanskje raidtool mangler?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ikke nok partisjoner for RAID nivå %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Start ALSA (Advanced Linux Sound Architecture) lydsystem"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron en periodisk kommandoplanlegger."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd blir brukt til overvåkning av batteristatus og logging av dette via "
-"syslog.\n"
-"Kan også brukes til å slå av maskinen når batteriet er dårlig."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Kjører kommandoer planlagt av at kommandoen ved tidspunkt spesifisert når\n"
-"at ble kjørt, og kjører batch kommandoer når lastingsmengden er lav nok."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron er et standard UNIX-program som kjører brukerspesifiserte programmer\n"
-"ved periodisk planlagte tider. vixie cron gir flere funksjoner til vanlig "
-"UNIX cron,\n"
-"inkludert bedre sikkerhet og mere kraftfulle konfigurasjonsopsjoner."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM gir musestøtte til tekstbaserte Linux applikasjoner som\n"
-"Midnight Commander. Den lar også musebaserte konsoller foreta klipp-og-lim "
-"operasjoner,\n"
-"og inkluderer støtte for pop-up menyer i konsollen."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake kjører et maskinvaresøk, og kan konfigurere ny/endret\n"
-"maskinvare."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache er en World Wide Web tjener. Den blir brukt til å tjene HTML-filer\n"
-"og CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internett supertjenerdaemonen (vanligvis kalt inetd) starter\n"
-"varierende Internett-tjenester ettersom det trengs. Den er ansvarlig for å "
-"starte\n"
-"mange tjenester, inkludert telnet, ftp, rsh, og rlogin. Stopping av inetd "
-"stopper\n"
-"alle tjenestene den er ansvarlig for."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Start pakkefiltrering for Linux kjerne 2.2 serien for å sette\n"
-"opp en brannmur for å beskytte maskinen din fra nettverksangrep."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Denne pakken laster det valgte tastaturkartet som er satt i\n"
-"/etc/sysconfig/keyboard. Dette kan bli valgt ved bruk av kbdconfig "
-"verktøyet.\n"
-"For de fleste maskiner bør dette være aktivert."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatisk regenerering av kjernehode i /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "automatisk oppdagelse og konfigurering av maskinvare ved oppstart."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf vil noen ganger arrangere utførelse av forskjellige\n"
-"oppgaver ved oppstart for å vedlikeholde systemkonfigurasjon."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd er skriverdaemonen som behøves for at lpr skal virke ordentlig. Den er\n"
-"i hovedsak en tjener som fordeler utskriftsjobber til skriveren(e)."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, brukt for å bygge en tjener med høy ytelse og\n"
-"tilgjengelighet."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) er en Domain Name Server (DNS) som brukes til å bestemme\n"
-"vertsnavn til IP-adresser."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monterer og demonterer alle Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), og NCP (NetWare) monteringspunkter."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiverer/deaktiverer alle nettverksgrensesnitt konfigurert til å starte\n"
-"ved oppstart."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS er en populær protokoll for fildeling over TCP/IP nettverk.\n"
-"Denne tjenesten tilbyr NFS-tjener funksjonalitet som er konfigurert via\n"
-"/etc/exports filen."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS er en populær protokoll for fildeling over TCP/IP nettverk.\n"
-"Denne tjenesten tilbyr NFS fillåsing funksjonalitet."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Slår automatisk på numlock-tast i konsoll og XFree ved\n"
-"oppstart."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Støtter OKI 4w og kompatible winskrivere."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA støtte er vanligvis støtte for ting som ethernet og\n"
-"modem i bærbare PC'er. Den vil ikke starte uten konfigurasjon så det er "
-"trygt\n"
-"å ha denne installert på maskiner som ikke trenger det."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper håndterer RPC-tilknytninger, som brukes av protokoller\n"
-"som NFS og NIS. Portmap-tjeneren må kjøres på maskiner som brukes som\n"
-"tjenere for protokoller som bruker RPC-mekanismen."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix er en posttransporteringsagent, som er et program som\n"
-"flytter post fra en maskin til en annen."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Lagrer og gjenoppretter system entropy pool for høyere kvalitet på\n"
-"tilfeldig nummergenerering."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Tilordne rå enheter til blokkenheter (som harddisk-\n"
-"partisjoner) for bruk av applikasjoner som Oracle"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Den rutete daemonen tillater automatisk oppdatering av IP rutertabell via\n"
-"RIP-protokollen. Mens RIP er mye brukt på små nettverk, trengs mere "
-"komplekse\n"
-"rutingprotokoller for komplekse nettverk."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokollen lar brukere på et nettverk finne ytelses-\n"
-"metrikser for alle maskinene på nettverket."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokollen lar brukere på et nettverk identifisere hvem som\n"
-"er logget inn på andre maskiner."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokollen lar fjernbrukere motta en liste over alle brukerne\n"
-"som er logget på en maskin som kjører rwho-daemonen (lik finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Start lydsystemet på maskinen din"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog er en fasilitet som mange daemoner bruker til å logge beskjeder\n"
-"til forskjellige systemloggfiler. Det er en god ide å alltid kjøre syslog."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Last driverene for dine usb enheter."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Starter X-font tjeneren (dette er obligatorisk for at XFree skal kjøre)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Velg hvilke tjenester som skal startes automatisk ved oppstart"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "Skriv ut"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internett"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "Systemmodus"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Opsjoner for fjern-lpd skriver"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Database"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "Tjener"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "kjører"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "stoppet"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Tjenester og daemoner"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Ingen tilleggsinformasjon\n"
-"om denne tjenesten, begklager."
-
-#: ../../services.pm_.c:222
-#, fuzzy
-msgid "Infos"
-msgstr "Info"
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ved oppstart"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Status"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektor"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Installerer pakke %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Jeg kan ikke lese partisjonstabellen din, den er for ødelagt for meg :(\n"
-"Jeg vil førsøke å blanke ut dårlige partisjoner"
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "Feil!"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Jeg kan ikke finne filen '%s' som jeg trenger."
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "Autoinstallasjonskonfigurering"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Du holder på med å konfigurere en automatisk installasjonsdiskett. Denne "
-"muligheten erlitt farlig, og må brukes forsiktig.\n"
-"\n"
-"Med denne muligeten vil du kunne kjøre installasjonen du gjennomførte på "
-"denne maskinenpå nytt, med muligheten for å selv kunne forandre på noen av "
-"instillingene.\n"
-"\n"
-"For maksimal sikkerhet vil partisjoneringen og formateringen aldri bli "
-"gjennomført automatisk, uansett hva du valgte under installasjonen.\n"
-"\n"
-"Ønsker du å fortsette?"
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "Konfigurasjon av automatiske skritt"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Vennligst velg for hvert steg om det skal være som under installasjonen, "
-"eller manuelt"
-
-#: ../../standalone/drakautoinst_.c:144
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:160
-msgid "$_"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:242 ../../standalone/drakgw_.c:600
-msgid "Congratulations!"
-msgstr "Gratulerer!"
-
-#: ../../standalone/drakautoinst_.c:243
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketten har blitt generert.\n"
-"Du kan nå gjennomføre installasjonen på nytt."
-
-#: ../../standalone/drakautoinst_.c:281
-#, fuzzy
-msgid "Auto Install"
-msgstr "Installer"
-
-#: ../../standalone/drakautoinst_.c:343
-#, fuzzy
-msgid "Add an item"
-msgstr "Legg til en bruker"
-
-#: ../../standalone/drakautoinst_.c:350
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Formaterer loopback-fil %s"
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Deling av Internett tilkobling"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Deling av Internett tilkobling er slått på"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Oppsett av deling av Internett tilkobling har allerede blitt gjort.\n"
-"Dette er for øyeblikket slått på.\n"
-"\n"
-"Hva vil du gjøre?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "slå av"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "avvis"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "Konfigurer på nytt"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Slår av tjenere..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Deling av Internett tilkobling er slått av"
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Deling av Internett tilkobling er slått av"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Oppsett av deling av Internett tilkobling har allerede blitt gjort.\n"
-"Dette er for øyeblikket slått av.\n"
-"\n"
-"Hva vil du gjøre?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "slå på"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Slår på tjenere..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Deling av Internett tilkobling er nå slått på."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Du er i ferd med å konfigurere maskinen din til å dele Internett-"
-"tilkobling.\n"
-"Andre maskiner i nettverket ditt vil da kunne bruke denne maskinens "
-"Internett tilkobling.\n"
-"\n"
-"Merk: du trenger et dedikert nettverksadapter for å sette opp et lokalt "
-"nettverk (LAN)."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Grensesnitt %s (bruker modul %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Grensesnitt %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Ikke noe nettverksadapter i systemet ditt!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ikke noe ethernet nettverksadapter har blitt oppdaget i systemet ditt. "
-"Vennligst kjør verktøyet for maskinvarekonfigurasjon."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Nettverksgrensesnitt"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Det er bare ett konfigurert nettverksadapter i systemet ditt:\n"
-"\n"
-"%s\n"
-"\n"
-"Jeg er i ferd med å sette opp ditt lokale nettverk (LAN) med dette adapteret."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Vennligst velg hvilket nettverksadapter som skal kobles til ditt lokale "
-"nettverk (LAN)."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Advarsel, nettverksadapteret er allerede konfigurert. Jeg vil konfigurere "
-"det på nytt."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Mulig LAN-adresse konflikt funnet i konfigurasjonen til %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Brannmurkonfigurasjon oppdaget!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Advarsel! En eksisterende brannmurkonfigurasjon har blitt oppdaget. Du "
-"trenger muligens å konfigurere noe manuelt etter installasjon."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Konfigurerer..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Konfigurerer script, installerer programvare, starter tjenere..."
-
-#: ../../standalone/drakgw_.c:312
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemer ved installering av pakke %s"
-
-#: ../../standalone/drakgw_.c:601
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Alt har blitt konfigurert.\n"
-"Du kan nå dele Internett-tilkobling med andre maskiner på ditt lokale "
-"nettverk ved å bruke automatisk nettverkskonfigurasjon (DHCP)."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Oppsett har allerede blitt gjort, men er for øyeblikket slått av."
-
-#: ../../standalone/drakgw_.c:619
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Oppsett har allerede blitt gjort, og er for øyeblikket slått på."
-
-#: ../../standalone/drakgw_.c:620
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Deling av Internett tilkobling har aldri blitt konfigurert."
-
-#: ../../standalone/drakgw_.c:625
-msgid "Internet connection sharing configuration"
-msgstr "Internett deling av tilkobling konfigurasjon"
-
-#: ../../standalone/drakgw_.c:632
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Velkommen til verktøyet for deling av Internett tilkobling!\n"
-"\n"
-"%s\n"
-"\n"
-"Klikk på Konfigurer for å starte oppsett-hjelperen."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Nettverkskonfigurasjon (%d adaptere"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:590
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Slett profil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Profil som skal slettes:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Ny profil...."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Vertsnavn: "
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Internett-tilgang"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Type:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:400
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:400
-msgid "Interface:"
-msgstr "Grensesnitt:"
-
-#: ../../standalone/draknet_.c:194
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:199
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:218
-msgid "Starting your connection..."
-msgstr "Starter tilkoblingen din..."
-
-#: ../../standalone/draknet_.c:226
-msgid "Closing your connection..."
-msgstr "Lukker tilkoblingen din..."
-
-#: ../../standalone/draknet_.c:231
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Tilkoblingen er ikke lukket.\n"
-"Prøv å gjøre det manuelt ved å kjøre\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"i root."
-
-#: ../../standalone/draknet_.c:234
-msgid "The system is now disconnected."
-msgstr "Systemet er nå nedkoblet."
-
-#: ../../standalone/draknet_.c:246
-msgid "Configure Internet Access..."
-msgstr "Konfigurer internetttilgang...."
-
-#: ../../standalone/draknet_.c:253 ../../standalone/draknet_.c:452
-msgid "LAN configuration"
-msgstr "LAN-konfigurasjon"
-
-#: ../../standalone/draknet_.c:258
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:258
-msgid "Interface"
-msgstr "rensesnitt"
-
-#: ../../standalone/draknet_.c:258
-msgid "Protocol"
-msgstr "Protokoll"
-
-#: ../../standalone/draknet_.c:258
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:270
-msgid "Configure Local Area Network..."
-msgstr "Konfigurer lokalt nettverk"
-
-#: ../../standalone/draknet_.c:282
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:309
-msgid "Apply"
-msgstr "Bruk"
-
-#: ../../standalone/draknet_.c:328
-msgid "Please Wait... Applying the configuration"
-msgstr "Vennligst vent . . . Setter konfigurasjonen på plass"
-
-#: ../../standalone/draknet_.c:408
-msgid "Connected"
-msgstr "Tilkoblet"
-
-#: ../../standalone/draknet_.c:408
-msgid "Not connected"
-msgstr "Ikke tilkoblet"
-
-#: ../../standalone/draknet_.c:409
-msgid "Connect..."
-msgstr "Koble til..."
-
-#: ../../standalone/draknet_.c:409
-msgid "Disconnect..."
-msgstr "Koble fra..."
-
-#: ../../standalone/draknet_.c:434
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen konfigurerte grensesnitt.\n"
-"Konfigurer disse først ved å klikke på 'Konfigurer'"
-
-#: ../../standalone/draknet_.c:456
-msgid "LAN Configuration"
-msgstr "LAN-konfigurasjon"
-
-#: ../../standalone/draknet_.c:467
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:473
-msgid "Boot Protocol"
-msgstr "Oppstartsprotokoll"
-
-#: ../../standalone/draknet_.c:474
-msgid "Started on boot"
-msgstr "Startet ved oppstart"
-
-#: ../../standalone/draknet_.c:475
-msgid "DHCP client"
-msgstr "DHCP-klient"
-
-#: ../../standalone/draknet_.c:499 ../../standalone/draknet_.c:501
-msgid "activate now"
-msgstr "aktiver nå"
-
-#: ../../standalone/draknet_.c:499 ../../standalone/draknet_.c:501
-msgid "desactivate now"
-msgstr "deaktiver nå"
-
-#: ../../standalone/draknet_.c:555
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen internett-tilkobling.\n"
-"Opprett en først ved å klikke på 'Konfigurer'"
-
-#: ../../standalone/draknet_.c:579
-msgid "Internet connection configuration"
-msgstr "Internett tilkobling konfigurasjon"
-
-#: ../../standalone/draknet_.c:583
-msgid "Internet Connection Configuration"
-msgstr "Internett tilkobling konfigurasjon"
-
-#: ../../standalone/draknet_.c:592
-msgid "Connection type: "
-msgstr "Oppkoblingstype:"
-
-#: ../../standalone/draknet_.c:598
-msgid "Parameters"
-msgstr "Parametere"
-
-#: ../../standalone/draknet_.c:625
-msgid "Ethernet Card"
-msgstr "Ethernettkort"
-
-#: ../../standalone/draknet_.c:626
-msgid "DHCP Client"
-msgstr "DHCP-klient"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Velkommen til Crackers"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Dårlig"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoid"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Dette nivået bør brukes med forsiktighet. Det gjør systemet ditt lettere å\n"
-"bruke, men mer utsatt: det må ikke brukes på en maskin koblet til andre\n"
-"eller til Internett. Det er ingen adgang med passord."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Passord er nå aktivert, men bruk som nettverksmaskin er fortsatt ikke "
-"anbefalt."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Få endringer for dette sikkerhetsnivået, hovedforskjellen er at det er\n"
-"flere advarsler og kontroller."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Dette er standard sikkerhet anbefalt for en maskin som vil bli brukt til\n"
-"tilkobling mot Internett som klient. Det er nå sikkerhetskontroller. "
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Med dette sikkerhetsnivået kan systemet brukes som tjener.\n"
-"Sikkerheten er nå høy nok til å bruke systemet som en tjener som\n"
-"godtar oppkoblinger fra mange klienter. "
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Vi tar funksjonene for nivå 4, men nå er systemet fullstendig stengt.\n"
-"Sikkerhetsfunksjonene er nå på maksimum."
-
-#: ../../standalone/draksec_.c:73
-#, fuzzy
-msgid "Security level"
-msgstr "Setter sikkerhetsnivå"
-
-#: ../../standalone/draksec_.c:75
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Velg opsjoner for tjener"
-
-#: ../../standalone/draksec_.c:76
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:80
-msgid "Setting security level"
-msgstr "Setter sikkerhetsnivå"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrollpanel"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Velg verktøyet du ønsker å bruke"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "bruk: keyboarddrake [--expert] [tastatur]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Ønsker du at BackSpace skal returnere Delete i konsoll?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Bytt CD"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Vennligst sett inn installasjons-CD'en i stasjonen og trykk Ok når du er\n"
-"ferdig. Hvis du ikke har denne, trykk Avbryt for å unngå oppgradering."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kan ikke starte oppgradering !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "ingen serie_usb funnet\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Emulere tredje knapp?"
-
-#: ../../standalone/scannerdrake_.c:51
-#, c-format
-msgid "%s found on %s, configuring it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:58
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Velg et grafikk-kort"
-
-#: ../../standalone/scannerdrake_.c:79
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:83
-#, c-format
-msgid "This %s scanner uses parallel port, which is unsupported for the moment"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Brannmurkonfigurasjon"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Brannmurkonfigurasjon"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Brannmur\n"
-"\n"
-"Du har allerede satt opp en brannmur.\n"
-"Klikk på Konfigurer for å endre eller fjerne brannmuren"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Brannmur\n"
-"\n"
-"Klikk på Konfigurer for å sette opp en standard brannmur"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Velg språk"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Velg installasjonsklasse"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Oppdaging av harddisk"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfigurer mus"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Velg tastatur"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sikkerhet"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Oppsett filsystemer"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formater partisjoner"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Velg pakker for installering"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installer systemet"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Legg til en bruker"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfigurer nettverk"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfigurer tjenester"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Opprett en oppstartdiskett"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Installer oppstartslaster"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfigurer X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Avslutt installering"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall konfigurering\n"
-"\n"
-"Dette konfigurerer en personlig brannmur for denne Mandrake Linux maskinen.\n"
-"For en kraftig dedikert brannmurløsning ta en kikk på den\n"
-"spesialiserte MandrakeSecurity Firewall distribusjonen."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Vi vil nå stille deg spørsmål om hvilke tjenester du vil tillate\n"
-"Internett å koble til. Tenk nøye over disse spørsmålene,\n"
-"da sikkerheten til maskinen din er viktig.\n"
-"\n"
-"Hvis du ikke bruker noen av disse tjenestene for øyeblikket, skru\n"
-"av brannmur. Du kan endre denne konfigurasjonen når du vil ved å\n"
-"kjøre denne applikasjonen på nytt!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Kjører du en web-tjener på denne maskinen som hele hele Internett trenger\n"
-"å se? Hvis du kjører en web-tjener som kun trenger tilgang fra denne "
-"maskinen\n"
-"kan du trygt svare NEI her.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Kjører du en navnetjener på denne maskinen? Hvis du ikke satte opp en\n"
-"for å gi ut IP og soneinformasjon til hele Internett, vennligst svar nei.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Ønsker du å tillate innkommende Secure Shell (ssh) tilkoblinger? Dette\n"
-"er et alternativ til telnet som du kan bruke til innlogg. Hvis du bruker\n"
-"telnet nå burde du definitivt bytte til ssh. telnet er ikke kryptert --\n"
-"så noen angripere kan stjele passordet ditt hvis du bruker det. ssh\n"
-"er kryptert og tillater ikke dette."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Ønsker du å tillate innkommende telnet tilkoblinger?\n"
-"Dette er forferdelig usikkert som vi forklarte i forrige skjermbilde. Vi\n"
-"anbefaler på det sterkeste å svare Nei her og bruke ssh i stedet for\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Kjører du en FTP-tjener her som du trenger å ha tilgjengelig på\n"
-"Internett? I såfall anbefaler vi på det sterkeste at du kun bruker\n"
-"den til anonyme overføringer. Passord sendt med FTP kan stjeles av\n"
-"angripere, siden FTP heller ikke bruker kryptering for å overføre passord.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Kjører du en epost-tjener her? Hvis du sender beskjeder via \n"
-"pine, mutt eller andre tekstbaserte epost-klienter gjør du\n"
-"antageligvis det. Eller skal du slå av dette.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Kjører du en POP- eller IMAP-tjener her? Denne vil bli\n"
-"brukt som vert for ikke-web-baserte epost-kontoer via \n"
-"denne maskinen.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Det ser ut til at du kjører en 2.2 kjerne. Hvis nettverks-IP'en\n"
-"din er automatisk satt av en maskin hjemme eller på kontoret \n"
-"(dynamisk tildelt), trenger vi å tillate dette.. Er dette\n"
-"tilfelle?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Mottar maskinen din tid synkronisert til en annen maskin?\n"
-"For det meste er dette brukt av medium-store /Unix/Linux\n"
-"organisasjoner for å synkronisere tid for ting som logging. Hvis\n"
-"du ikke er en del av et større kontor og ikke har hørt om dette\n"
-"gjør du antageligvis ikke."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurasjon ferdig. Skal vi skrive endringene til disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Kan ikke åpne %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Kan ikke åpne %s for skriving: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Nettverksmaskin (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-tjener, SMB-tjener, Proxy-tjener, SSH-tjener"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome arbeidstasjon"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Verktøy for din Palm Pilot eller din Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Arbeidstasjon"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Server, Brannmur/ruter"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Tjener for domenenavn og nettverksinformasjon"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kontorprogrammer: tekstbehandlere (kword, abiword), regneark (kspread, "
-"gnumeric), pdf fremvisere etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Lydrelaterte verktøy: mp3 eller midi-spillere, miksere etc."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Bøker og howto's om Linux og fri programvare"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE arbeidstasjon"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Sett med verktøy for e-post, nyheter, web, filoverføring og chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Database"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL eller MySQL database tjener"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Verktøy for å forenkle konfigurasjonen på maskinen din"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Lyd"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Verktøy"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentasjon"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsollverktøy"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix posttjener, Inn nyhetstjener"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internettstasjon"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimediastasjon"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN-konfigurasjon"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Mere grafiske skrivebord (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, basis grafikkmiljø med en samling av passende verktøy"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafisk miljø"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Utvikling"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache og Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Verktøy for å opprette og brenne CD'er"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kontor og arbeidsmaskin"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafiske programmer så som Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C og C++ utviklingsbibliotek, programmer og include filer"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Nettverk datamaskintjener"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Server, Mail/Gruppevare/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Spillstasjon"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videospillere og redigerere"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafikk"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Underholdningsprogrammer: arkade, bordspill, strategi etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Sett med verktøy for å lese og sende e-post og nyheter (pine, mutt, tin...) "
-"og for se på webben"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arkivering, emulatorer, overvåkning"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Personlig finans"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Et grafisk miljø med et brukervennlig sett med applikasjoner og skrivebords- "
-"verktøy"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienter for forskjellige protokoller inkludert ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internett-gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Lyd og bilde avspilling/redigeringsprogrammer"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Andre grafiske skrivebord"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Redigerere, skall, filverktøy, terminaler"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programmer for å håndtere dine finanser, så som gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Spill"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Personling informasjonshåndtering"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD-brenning"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Vitenskaplig arbeidsstasjon"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Tvetydig (%s), vær mere presis\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (standard %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Ditt valg? (standard %s  entre `none' for ingen) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "kan ikke åpne /etc/sysconfig/autologin for lesing: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Vil du starte nettverket på nytt"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Er du enig?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Jeg er i ferd med å starte denne nettverksenheten på nytt:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Jeg er i ferd med å starte nettverksenhet %s på nytt. Er du enig?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Hvis du ikke spesifikt vet en annen måte, så er det vanlige valget\n"
-#~ "\"/dev/hda\" (primær IDE-disk) eller \"/dev/sda\" (første SCSI-disk)."
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Her er følgende skriverkø.\n"
-#~ "Du kan legge til flere eller endre de eksisterende."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Oppkoblingstimeout (i sekunder) [beta, ennå ikke implementert ]"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Velg standard bruker:"
-
-#~ msgid "Spooler: "
-#~ msgstr "Skriverkøbehandler: "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Vennligst test musen."
-
-#~ msgid "Actions"
-#~ msgstr "Muligheter"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Avhengigheter automatisk"
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Vær forsiktig, å ha numlock slått på forårsaker at mange av tastene\n"
-#~ "gir tall istedenfor vanlige bokstaver (f.eks: `p' gir `6')"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Oppstartsstilkonfigurasjon"
-
-#~ msgid "CUPS starting"
-#~ msgstr "CUPS starter"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Kan ikke bruke supermount i høyt sikkerhetsnivå"
-
-#~ msgid "Choice"
-#~ msgstr "Valg"
-
-#~ msgid "Choose"
-#~ msgstr "Velg"
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Velg oppsettet som stemmer med tastaturet ditt fra listen ovenfor"
-
-#~ msgid "Color depth options"
-#~ msgstr "Opsjoner fargedybde"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Konfigurer LILO/GRUB"
-
-#~ msgid "Configure..."
-#~ msgstr "Konfigurer..."
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Opprett en oppstartdiskett"
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Oppretting av oppstartsdiskett er sterkt anbefalt. Hvis du ikke kan\n"
-#~ "starte opp maskinen din er dette eneste måten å redde den på uten å "
-#~ "reinstallere."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Tsjekkisk (Programmerere)"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Server, DNS/DHCP"
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL- (eller ADSL) tilkobling"
-
-#~ msgid "Development, Database"
-#~ msgstr "Utvikling, database"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Utvikling, Intergrert miljø"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Utvikling. Standardverktøy"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Kjør ut side etter jobb?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Hver skriverkø (som skrivejobber sendes til) trenger et navn\n"
-#~ "(ofte lp) og en spolingskatalog direkte assosiert med denne. Hvilket\n"
-#~ "navn og katalog skal brukes for denne køen og hvordan er skriveren "
-#~ "tilkoblet?"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Hver skriver håndtert av CUPS trenger et navn (f.eks. lp).\n"
-#~ "Andre parametere som beskrivelse av skriveren eller dennes lokasjon\n"
-#~ "kan defineres. Hvilket navn skal brukes for denne skriveren og\n"
-#~ "hvordan er skriveren tilkoblet?"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Ekstra GhostScript opsjoner"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Ekstra tekstopsjoner"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Server. Fil/utskrift/samba"
-
-#~ msgid "Firewall Configuration Wizard"
-#~ msgstr "Konfigurasjonveiviser for brannmur"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Første DNS-tjener"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Fikse trappestegs-tekst?"
-
-#~ msgid "Format floppy"
-#~ msgstr "Formater diskett"
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux kan håndtere mange typer skrivere. Hver av disse trenger\n"
-#~ "forskjellige oppsett.\n"
-#~ "\n"
-#~ "\n"
-#~ "Hvis skriveren din er fysisk koblet til maskinen din velg \"Lokal\n"
-#~ "skriver\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Hvis du ønsker å bruke en skriver lokalisert på en fjern Unix maskin, "
-#~ "velg\n"
-#~ "\"Fjern skriver\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Hvis du ønsker å bruke en skriver lokalisert på en fjern Microsoft "
-#~ "Windows maskin\n"
-#~ "(eller på Unix maskiner som bruker SMB protocol), velg \"SMB/Windows "
-#~ "95/98/NT\"."
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Hvordan vil du koble opp mot Internett?"
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Hvis noe er galt i X konfigurasjonen, bruk disse opsjonene til å\n"
-#~ "konfigurere X Window systemet riktig."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Hvis du ikke er sikker på at informasjonen ovenfor er\n"
-#~ "korrekt eller hvis du ikke vet eller ikke er sikker på hva du skal entre "
-#~ "kan\n"
-#~ "informasjon fåes fra din Internett-tilbyder. Hvis du ikke\n"
-#~ "entrer DNS (navnetjener) informasjon her vil denne informasjonen bli "
-#~ "innhentet\n"
-#~ "fra din Internett-tilbyder ved oppkobling."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Hvis du har alle CDene i listen nedenfor, klikk Ok. Hvis du ikke har\n"
-#~ "noen av disse CDene, klikk Avbryt. Hvis bare noen av CDene mangler, fjern "
-#~ "disse,\n"
-#~ "klikk så Ok."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Hvis du velger å bruke grafisk login, velg \"Ja\". Ellers, velg\n"
-#~ "\"Nei\"."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Hvis du skal bruke proxier, vennligst konfigurer disse nå. Hvis du ikke "
-#~ "vet\n"
-#~ "om du skal bruke proxier, spør nettverksadministratoren din eller din ISP."
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Hvis du ønsker andre språk (enn det du valgte ved\n"
-#~ "begynnelsen av installasjonen) skal være tilgjengelige etter "
-#~ "installasjonen velg\n"
-#~ "disse i listen ovenfor. Hvis du ønsker å velge alle trenger du bare å "
-#~ "velge \"Alle\"."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Hvis du ønsker å kunne gjøre utskrifter, velg et av følgende "
-#~ "utskriftsystem:\n"
-#~ "CUPS og LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS er et nytt, kraftig og fleksibelt utskriftsystem for Unix systemer "
-#~ "(CUPS\n"
-#~ "betyr \"Common Unix Printing System\"). Det er standard utskriftsystem i\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR er det gamle utskriftsystemet brukt i tidligere Mandrake Linux "
-#~ "distribusjoner.\n"
-#~ "\n"
-#~ "\n"
-#~ "Hvis du ikke har skriver klikk på \"Ingen\"."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Hvis du ønsker å koble maskinen din til Internett eller\n"
-#~ "til et lokalt nettverk velg det riktige valget. Skru på enheten din\n"
-#~ "før du velger det korrekte valget for å la DrakX oppdage det automatisk.\n"
-#~ "\n"
-#~ "\n"
-#~ "Hvis du ikke har noen oppkobling til Internett eller et lokalt nettverk, "
-#~ "velg\n"
-#~ "\"Slå av nettverk\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Hvis du ønsker å konfigurere nettverket senere etter installasjonen eller "
-#~ "hvis du er\n"
-#~ "ferdig med å konfigurere nettverksforbindelsen, velg \"Ferdig\"."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Hvis modemet ditt er et eksternt modem, slå det på nå for å la DrakX "
-#~ "oppdage det automatisk."
-
-#~ msgid ""
-#~ "If your network uses LDAP (or NIS) protocol for authentication, select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ " Hvis ditt nettverk bruker LDAP (eller NIS) protokollen for "
-#~ "autentisering, velg\n"
-#~ "\"LDAP\" (eller \"NIS\") for autentisering. Hvis du ikke vet, spør din "
-#~ "nettverksadministrator.\n"
-#~ "\n"
-#~ "Hvis din datamaskin ikke er knyttet til noe administrert nettver, kan du\n"
-#~ "velge \"Lokale filer\" for autentisering."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Hvis nettverket ditt bruker NIS, velg \"Bruk NIS\". Hvis du ikke vet "
-#~ "dette,\n"
-#~ "spør nettverksadministratoren din."
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Internett og nettverkskonfigurasjon"
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO og grubs hovedvalg er:\n"
-#~ "  - Oppstartsenhet: Setter navnet til enheten (f.eks. en harddisk\n"
-#~ "partisjon) som inneholder oppstartssektoren. Hvis du ikke spesifikt\n"
-#~ "vet et annet sted, velg \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Forsinkelse før oppstart av standard bilde: Spesifiserer tid som\n"
-#~ "oppstartslasteren skal vente før oppstart av det første bildet.\n"
-#~ "Dette er nyttig på systemer som umiddelbart starter fra harddisken etter\n"
-#~ "å ha slått på tastaturet. Oppstartslasteren venter ikke hvis\n"
-#~ "\"forsinkelse\" er utelatt eller er satt til null.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Skjermmodus: Dette spesifiserer VGA tekstmoduset som skal velges ved\n"
-#~ "oppstart. Følgende verdier er tilgjengelige: \n"
-#~ "\n"
-#~ "    * normal: velg normal 80x25 tekstmodus.\n"
-#~ "\n"
-#~ "    * <number>:  bruk tilsvarende tekstmodus.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Tøm \"/tmp\" ved hver oppstart: hvis du ønsker å slette alle filer og "
-#~ "kataloger\n"
-#~ "lagret i \"/tmp\" når du starter opp systemet ditt, velg dette valget.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Presiser RAM ved behov: dessverre, det er ingen standardmetode for å "
-#~ "spørre BIOS\n"
-#~ "om mengden av RAM i maskinen din. Som en konsekvens av dette kan Linux "
-#~ "mislykkes\n"
-#~ "med å finne riktig mengde RAM. Hvis dette er tilfelle kan du\n"
-#~ "spesifisere den riktige mengden med RAM her. Vennligst merk at en "
-#~ "differanse på 2 eller 4\n"
-#~ "MB mellom oppdaget minne og minne tilgjengelig i systemet ditt er normalt."
-
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "Lilo/Grub konfigurasjon"
-
-#~ msgid "Mail information"
-#~ msgstr "Mailinformasjon"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Diverse"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Forskjellige spørsmål"
-
-#~ msgid "Name of queue"
-#~ msgstr "Køens navn"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Navnet på profilen som skal lages:"
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Intet modem har blitt oppdaget. Velg serieporten som modemet er koblet "
-#~ "til.\n"
-#~ "\n"
-#~ "\n"
-#~ "For informasjon, den første serieporten (kalt \"COM1\" under Microsoft\n"
-#~ "Windows) er kalt \"ttyS0\" under Linux."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Det er nå tid for å konfigurere X-vindusystemet, som er kjernen\n"
-#~ "til det grafiske brukergrensesnittet i GNU/Linux. For dette formålet\n"
-#~ "må du konfigurere skjermkortet og skjermen din. De fleste av disse\n"
-#~ "trinnene skjer automatisk, så det du trenger å gjøre er å\n"
-#~ "verifisere hva som har blitt gjort og godkjenne innstillingene :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Når konfigureringen er over, vil X bli startet (hvis du ikke ber\n"
-#~ "DrakX om å la det være) så du kan sjekke og se om innstillingene\n"
-#~ "passer deg. Hvis de ikke gjør det, kan du gå tilbake og endre\n"
-#~ "disse så mange ganger som det måtte behøves."
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Nå når Internett-tilknytningen er konfigurert, kan\n"
-#~ "maskinen din konfigureres til å dele Internett-tilknytningen.\n"
-#~ "Merk: du trenger et dedikert nettverksadapter for å sette opp et lokalt "
-#~ "nettverk (LAN).\n"
-#~ "\n"
-#~ "Ønsker du å sette opp deling av Internett-tilknytning?\n"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Nummer av sider pr. sider ut"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Åpner tilkoblingen din..."
-
-#~ msgid "Paper Size"
-#~ msgstr "Papirstørrelse"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Velg ønsket språk for installering og systembruk."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Velg opsjoner som stemmer med skriveren din.\n"
-#~ "Se dokumentasjonen for skriveren hvis du ikke vet hva du skal velge her.\n"
-#~ "\n"
-#~ "\n"
-#~ "Du vil kunne teste din konfigurasjon i neste steg og du vil kunne "
-#~ "modifisere denne hvis den ikke virker som du vil."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Slå på modemet ditt og velg det riktige."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Slå på skriveren din før du fortsetter så DrakX kan oppdage den.\n"
-#~ "\n"
-#~ "Du må entre litt informasjon her.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Navn på skriveren: skriverspolen bruker \"lp\" som standard "
-#~ "skrivernavn. Så du må ha en skriver kalt \"lp\".\n"
-#~ "     Hvis du bare har en skriver kan du bruke flere navn for denne. Du "
-#~ "behøver bare å separere disse med et pipe\n"
-#~ "     tegn (et \"|\"). Så, hvis du foretrekker et mere meningsfylt navn, "
-#~ "må du sette det først, f.eks.: \"Min skriver|lp\".\n"
-#~ "     Skriveren som har \"lp\" i navnet sitt vil være standard skriver.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Beskrivelse: Dette er valgfritt, men kan være nyttig hvis flere "
-#~ "skrivere er koblet til maskinen din eller hvis du tillater\n"
-#~ "     andre maskiner å bruke denne skriveren.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Lokasjon: hvis du vil ha informasjon om hvor skriveren\n"
-#~ "     befinner seg, sett det her (du kan skrive hva\n"
-#~ "     du vil, f.eks. \"andre etasje\").\n"
-
-#~ msgid "Press next to continue."
-#~ msgstr "Trykk neste for å fortsette."
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Skrive ut tekst som PostScript?"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Tilbyder dns 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Tilbyder dns 2"
-
-#~ msgid "Reading CUPS drivers database..."
-#~ msgstr "Leser CUPS driver database..."
-
-#~ msgid "Reverse page order"
-#~ msgstr "Reversere siderekkefølge"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Høyre/venstre marginer i punkter (1/72 av inch)"
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO er en oppstartslaster for SPARC: den kan starte opp enten\n"
-#~ "GNU/Linux eller et annet operativsystem som du har på datamaskinen din.\n"
-#~ "Normalt blir de andre operativsystemene korrekt oppdaget og installert.\n"
-#~ "Hvis dette ikke er tilfelle, kan du legge til disse for hånd i dette\n"
-#~ "bildet. Vær forsiktig med å velge de korrekte parameterene.\n"
-#~ "\n"
-#~ "\n"
-#~ "Hvis du ikke ønsker å gi tilgang til de andre operativsystemene til\n"
-#~ "andre kan du fjerne linjene for disse. Men i så tilfelle trenger du\n"
-#~ "en oppstartsdiskett for å starte disse!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO's hovedopsjoner er:\n"
-#~ "  - Installasjon oppstartslaster: Indiker hvor du ønsker å plassere\n"
-#~ "informasjonen som trengs for å starte GNU/Linux. Hvis du ikke vet eksakt\n"
-#~ "hva du gjør, velg \"Første sektor av disken (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Forsinkelse før oppstart av standard bilde: Spesifiserer tid som\n"
-#~ "oppstartslasteren skal vente før oppstart av det første bildet.\n"
-#~ "Dette er nyttig på systemer som umiddelbart starter fra harddisken etter\n"
-#~ "å ha slått på tastaturet. Oppstartslasteren venter ikke hvis\n"
-#~ "\"forsinkelse\" er utelatt eller er satt til null."
-
-#~ msgid "Scientific applications"
-#~ msgstr "Vitenskaplige applikasjoner"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Andre DNS-tjener"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Velg tilkobling fjern-skriver"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Velg:\n"
-#~ "\n"
-#~ "  - Egendefinert: Hvis du er nok kjent med GNU/Linux, kan du velge\n"
-#~ "    primært bruk for maskinen din. Se nedenfor for detaljer.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ekspert: Dette krever at du er kjent med GNU/Linux og ønsker å\n"
-#~ "    utføre en meget egendefinert installasjon. Som for \"Egendefinert\"\n"
-#~ "    installasjonsklasse, vil du kunne velge bruk for systemet ditt.\n"
-#~ "    Men vær så snill, IKKE VELG DETTE HVIS DU IKKE VET HVA DU GJØR!"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Valgt størrelse %d%s"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovakisk (Programmerere)"
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "Beklager, mailkonfigurasjonen er ennå ikke implementert. Vennlist vær "
-#~ "tålmodig."
-
-#~ msgid "Spool directory"
-#~ msgstr "Spolingskatalog"
-
-#~ msgid "Standard tools"
-#~ msgstr "Standard verktøy"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Dette oppstartsscriptet prøver å laste modulene for usb-musen din."
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "For et mere sikkert system, burde du velge \"Bruk skyggefil\" og\n"
-#~ "\"Bruk MD5 passord\"."
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Topp/bunn marginer i punkter (1/72 av inch)"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Opsjoner uniprint-driver"
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "Velkommen til nettverkskonfigurasjonsveiviseren.\n"
-#~ "Hvilke komponenter ønsker du å konfigurere?\n"
-
-#~ msgid "Welcome to the Internet Connection Sharing utility!"
-#~ msgstr "Velkommen til verktøyet for deling av Internett tilkobling!"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected.\n"
-#~ "In case of doubt, select \"Remote CUPS server\"."
-#~ msgstr ""
-#~ "Med en fjern-CUPS tjener behøver du ikke å konfigurere\n"
-#~ "noen skrivere her; skrivere vil bli oppdaget automatisk.\n"
-#~ "Ved tvil, velg \"Fjern-CUPS tjener\"."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Ja, skriv ASCII testside"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Ja, skriv PostScript testside"
-
-#~ msgid "Yes, print both test pages"
-#~ msgstr "Ja, skriv begge testsidene"
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Du kan velge et sikkerhetsnivå for systemet ditt. Vennligst se i manualen "
-#~ "for full\n"
-#~ "  informasjon. Hovedsaklig, hvis du ikke vet hva du skal velge, behold "
-#~ "standard valg.\n"
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Du kan konfigurere en lokal skriver (koblet til maskinen din) eller en "
-#~ "fjern\n"
-#~ "skriver (tilgengelig via et Unix, Netware eller Microsoft Windows "
-#~ "nettverk)."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Du kan installere kryptografisk pakke hvis internett tilknytningen din "
-#~ "er\n"
-#~ "satt opp riktig. Velg først et speil som du ønsker å hente ned pakkene "
-#~ "fra og\n"
-#~ "velg så pakkene du ønsker å installere.\n"
-#~ "\n"
-#~ "\n"
-#~ "Merk at du må velge speil og kryptografisk pakke ihht. lovgivning i ditt "
-#~ "land."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Du kan nå velge individuelt alle pakkene du\n"
-#~ "ønsker å installere.\n"
-#~ "\n"
-#~ "\n"
-#~ "Du kan utvide eller trekke sammen treet ved å klikke på valgene i det "
-#~ "venstre hjørnet av\n"
-#~ "pakkevinduet.\n"
-#~ "\n"
-#~ "\n"
-#~ "Hvis du foretrekker å se pakkene sortert i alfabetisk rekkefølge, klikk "
-#~ "på ikonet\n"
-#~ "\"Velg mellom flat og gruppe sortert\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Hvis du ønsker å ikke bli advart om avhengighet, klikk på \"Automatisk\n"
-#~ "avhengighet\". Hvis du gjør dette, merk at å ikke velge en pakke kan i "
-#~ "det stille\n"
-#~ "velge bort flere andre pakker som er avhengig av denne."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Du kan nå entre root-passordet for Mandrake Linux systemet ditt.\n"
-#~ "Passordet må entres to ganger for å verifisere at begge "
-#~ "passordinntastingene er identiske.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root er administratoren av systemet, og er den eneste brukeren som har "
-#~ "adgang\n"
-#~ "til å modifisere systemkonfigurasjonen. Velg derfor dette passordet "
-#~ "med  \n"
-#~ "forsiktighet! Ikke-autorisert bruk av root-kontoen kan være ekstremt "
-#~ "farlig for integriteten\n"
-#~ "til systemet, dataene det inneholder, og andre systemer tilkoblet dette.\n"
-#~ "\n"
-#~ "\n"
-#~ "Passordet bør være en miks av alfanumeriske tegn og være minst åtte tegn\n"
-#~ "langt. Passordet bør aldri bli skrevet ned.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ikke lag passordet for langt eller for komplisert: du må kunne klare å "
-#~ "huske det uten\n"
-#~ "for mye trøbbel."
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Du kan nå velge noen forskjellige opsjoner for systemet ditt.\n"
-#~ "\n"
-#~ "* Bruk harddisk-optimisering: Denne opsjonen kan forbedre harddisk "
-#~ "ytelse, men er bare for erfarne brukere: noen ustabile\n"
-#~ "  chip-sett kan ødelegge dataene dine, så vær forsiktig. Merk at kjernen "
-#~ "har en innebygd svarteliste over disker og chip-sett,\n"
-#~ "  men hvis du vil unngå leie overraskelser, la denne opsjonen være "
-#~ "avslått.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Velg sikkerhetsnivå: Du kan velge et sikkerhetsnivå for systemet ditt. "
-#~ "Se i manualen for mer informasjon. \n"
-#~ "  Basis: hvis du ikke vet hva du skal velge, bruk standard valg.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Presiser RAM-størrelse ved behov: dessverre er det ingen standardmetode "
-#~ "for å spørre BIOS om mengden av RAM i maskinen din.\n"
-#~ "  Som en konsekvens kan Linux mislykkes i finne hvor mye RAM du har. Hvis "
-#~ "dette er tilfelle, kan du spesifisere riktig\n"
-#~ "  RAM-mengde her. Merk at en differanse på 2 eller 4 MB mellom minne som "
-#~ "er funnet og minnet i systemet\n"
-#~ "  er normalt.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Fjernbart media automontering: Hvis du ønsker å ikke montere fjernbare "
-#~ "media manuelt (CD-ROM, diskett, Zip) ved å skrive\n"
-#~ " \"mount\" og \"umount\", velg denne opsjonen.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Tøm \"/tmp\" ved hver oppstart: hvis du ønsker å slette alle filer og "
-#~ "kataloger lagret i \"/tmp\" når du starter opp systemet ditt,\n"
-#~ "  velg denne opsjonen.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Slå på NumLock ved oppstart: Hvis du ønsker NumLock slått på etter "
-#~ "oppstart, velg denne opsjonen. Merk at du ikke burde slå\n"
-#~ "  på denn funksjonen på bærbare og at NumLock vil kanskje/kanskje ikke "
-#~ "virke under X."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Du kan nå velge tidssone som stemmer overens med der du bor."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Du kan nå teste musen din. Bruk knapper og hjul for å verifisere\n"
-#~ "om innstillingene er ok. Hvis ikke kan du klikke på \"Avbryt\" for å "
-#~ "velge en\n"
-#~ "annen driver."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "Du kan nå teste din mus. Bruk knappene og hjul for å sjekke\n"
-#~ "om instillingene er gode. Hvis ikke, kan du trykke på \"Avbryt\"\n"
-#~ "for å velge en annen driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "Hvis du installerer på en Applemaskin med en 1 knappsmus, vil du\n"
-#~ "få sjansen til å definere noen tastaturknapper for å emulere den andre\n"
-#~ "og tredje museknappen. Dette vil la deg få full tilgang til "
-#~ "funskjonaliteten til\n"
-#~ "musen både i Linuxkonsollet og under X-windows.\n"
-#~ "\n"
-#~ "\n"
-#~ "Hvis du har en ADB-mus, vennligst velg USB, da linuxkjernen vil ordne\n"
-#~ "musemaskinvaren din."
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Du kan spesifisere URIen for å få tilgang til skriveren med CUPS."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Du kan nå konfigurere nettverksenheten din.\n"
-#~ "\n"
-#~ "   * IP-adresse: hvis du ikke vet eller ikke sikker på hva du skal entre, "
-#~ "spør nettverksadministratoren din.\n"
-#~ "     Du burde ikke entre en IP-adresse hvis du velger opsjonen "
-#~ "\"Automatisk IP\" nedenfor.\n"
-#~ "\n"
-#~ "   * Nettmaske: \"255.255.255.0\" er vanligvis et bra valg. Hvis du ikke "
-#~ "vet eller ikke er sikker på hva du skal entre\n"
-#~ "     spør nettverksadministratoren din.\n"
-#~ "\n"
-#~ "   * Automatisk IP: Hvis nettverket ditt bruker BOOTP eller DHCP "
-#~ "protokollen, velg denne opsjonen. Hvis valgt, trengs ingen verdi i\n"
-#~ "    \"IP-adresse\". Hvis du ikke vet eller ikke sikker på om du trenger å "
-#~ "velge denne opsjonen spør nettverksadministratoren din."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Du kan nå opprette en eller flere \"vanlige\" brukerkontoer, som\n"
-#~ "motsetning til den \"priviligerte\" brukerkontoen root. Du kan opprette\n"
-#~ "en eller flere kontoer for hver person du vil skal ha tilgang til\n"
-#~ "maskinen. Merk at hver brukerkonto vil ha sine egne valg (grafisk\n"
-#~ "miljø, programinnstillinger, etc.) og sin egen \"hjemmekatalog\"\n"
-#~ "hvor disse valgene blir lagret.\n"
-#~ "\n"
-#~ "\n"
-#~ "Først av alt, opprett en konto for deg selv! Selv om du vil være den "
-#~ "eneste brukeren\n"
-#~ "av maskinen, burde du IKKE logge inn som root for daglig bruk av "
-#~ "systemet: det er en\n"
-#~ "veldig stor sikkerhetsrisiko. Å gjøre systemet ubrukelig er veldig ofte "
-#~ "bare en skrivefeil unna.\n"
-#~ "\n"
-#~ "\n"
-#~ "Derfor burde du bare logge deg inn på systemet med brukerkontoen\n"
-#~ "du vil ha opprettet her, og bare logge inn som root for administrasjon-\n"
-#~ "og vedlikeholdsformål."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Du kan nå entre valg for oppringt. Hvis du ikke vet\n"
-#~ "eller ikke er sikker på hva du skal entre, kan korrekt informasjon fåes "
-#~ "fra\n"
-#~ "din Internett tilbyder. Hvis du ikke entrer DNS (navnetjener)\n"
-#~ "informasjon her vil denne informasjonen bli innhentet fra din Internett "
-#~ "tilbyder\n"
-#~ "ved oppkobling."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Du kan nå entre opsjoner for oppringt. hvis du ikke er sikker på hva du\n"
-#~ "skal entre kan korrekt informasjon fåes fra din Internett-tilbyder."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Du kan nå entre vertsnavnet ditt hvis behov. Hvis du ikke\n"
-#~ "vet eller ikke er sikker på hva du skal entre spør "
-#~ "nettverksadministratoren din."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Du kan nå entre vertsnavnet ditt hvis behov. Hvis du\n"
-#~ "ikke vet eller ikke er sikker på hva du skal entre ikke sett inn noe.."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Du kan nå entre ditt vertsnavn hvis det behøves. Hvis du\n"
-#~ "ikke vet eller ikke er sikker på hva du skal entre, så kan korrekt "
-#~ "informasjon\n"
-#~ "fåes fra din Internett-tilbyder."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Du kan nå velge de pakkegruppene du ønsker å\n"
-#~ "installere eller oppgradere.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX vil så sjekke om du har nok plass til å installere alle. Hvis ikke\n"
-#~ "vil du bli advart om dette. Hvis du likevel vil fortsette, vil "
-#~ "installasjonen av\n"
-#~ "alle valgte grupper fortsette, men pakker av mindre interesse vil ikke "
-#~ "bli\n"
-#~ "installert. Nederst på listen kan du velge opsjonen \n"
-#~ "\"Individuelt pakkevalg\"; i så tilfelle må du lete gjennom mer\n"
-#~ "enn 1000 pakker..."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Du må nå definere din maskin's bruk. Valgene er:\n"
-#~ "\n"
-#~ "t* Arbeidstasjon: Det ideele valget hvis du skal bruke maskinen din "
-#~ "hovedsaklig til hverdagsbruk, på kontoret\n"
-#~ "  eller hjemme.\n"
-#~ "\n"
-#~ "\n"
-#~ "t* Utvikling: Hvis du hovedsaklig skal bruke maskinen din til utvikling "
-#~ "av programvare er dette er godt valg. Du\n"
-#~ " vil da ha en komplett samling av programvare installert for å kompilere, "
-#~ "debugge og formatere kildekode,\n"
-#~ "  eller lage programvarepakker.\n"
-#~ "\n"
-#~ "\n"
-#~ "t* Tjener: Hvis du skal bruke maskinen din som en tjener er dette et godt "
-#~ "valg. Enten en filtjener (NFS eller\n"
-#~ "  SMB),  en utskriftstjener (Unix stil eller Microsoft Windows stil), en "
-#~ "autentifikasjonstjener (NIS), en database-\n"
-#~ "  tjener osv. Som så, ikke forvent at noe spesielt (KDE, GNOME etc.) vil "
-#~ "bli installert."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Du må nå velge skriveren din fra listen ovenfor."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Du må godta innholdet av lisensen ovenfor for å fortsette "
-#~ "installasjonen.\n"
-#~ "\n"
-#~ "\n"
-#~ "Klikk på \"Godta\" hvis du godtar innholdet.\n"
-#~ "\n"
-#~ "\n"
-#~ "Klikk på \"Nekte\" hvis du ikke godtar innholdet. Installasjonen vil "
-#~ "avslutte uten å modifisere din nåværende\n"
-#~ "konfigurasjon."
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Du må entre litt informasjon her.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Navn på køen: skriverspolen bruker \"lp\" som standard skrivernavn. "
-#~ "Så du må ha en skriver kalt \"lp\".\n"
-#~ "    Hvis du bare har en skriver kan du bruke flere navn for denne. Du "
-#~ "trenger bare å separere disse med et pipe\n"
-#~ "    tegn (et \"|\"). Så, hvis du foretrekker å ha et mere meningfylt navn "
-#~ "må du sette det først, f.eks.: \"Min skriver|lp\".\n"
-#~ "    Skriveren som har \"lp\" i navnet sitt vil bli standard skriver.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spolingskatalog: det er i denne katalogen utskriftsjobber er lagret. "
-#~ "Belhol standard valg\n"
-#~ "     hvis du ikke vet hva du skal bruke\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Skrivertilkobling: Hvis skriveren er fysisk koblet til maskinen din "
-#~ "velg \"Lokal skriver\".\n"
-#~ "     Hvis du ønsker å bruke en skriver lokalisert på en fjern Unix "
-#~ "maskin, vekg \"Fjern lpd skriver\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Hvis du ønsker å bruke en skriver lokalisert på en fjern Microsoft "
-#~ "Windows maskin (eller en Unix maskin som bruker SMB\n"
-#~ "     protokoll), velg \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Hvis du ønsker å bruke en skriver lokalisert på et NetWare nettverk, "
-#~ "velg \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Skriveren din har ikke blitt oppdaget. Entre navnet på enheten som\n"
-#~ "den er koblet til.\n"
-#~ "\n"
-#~ "\n"
-#~ "For informasjon, de fleste skrivere er koblet til den første "
-#~ "parallelporten. Denne\n"
-#~ "er kalt \"/dev/lp0\" under GNU/Linux og \"LPT1\" under Microsoft Windows."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Systemet ditt vil bli startet på nytt.\n"
-#~ "\n"
-#~ "Etter omstart vil ditt nye Mandrake Linux system bli automatisk lastet.\n"
-#~ "Hvis du ønsker å starte et annet eksisterende operativsystem, vennligst\n"
-#~ "les ytterligere instruksjoner."
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Merk: I DETTE SIKKERHETSNIVÅET ER ROOT INNLOGG VED KONSOLL IKKE TILLATT!\n"
-#~ "Hvis du ønsker å være root må du logge inn som bruker for så å bruke \"su"
-#~ "\".\n"
-#~ "Mere generelt, ikke forvent å bruke maskinen din til annet enn en "
-#~ "tjener.\n"
-#~ "Du har blitt advart."
-
-#~ msgid "cannot fork: "
-#~ msgstr "kan ikke dele: "
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "horisontal og fin aurora"
-
-#~ msgid "not connected"
-#~ msgstr "ikke tilkoblet"
-
-#~ msgid "toot"
-#~ msgstr "toot"
-
-#~ msgid "using module"
-#~ msgstr "bruker modul"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "vertikal og tradisjonell aurora"
-
-#~ msgid "yellow pages"
-#~ msgstr "gule sider"
diff --git a/perl-install/share/po/pl.po b/perl-install/share/po/pl.po
deleted file mode 100644
index a18db98a1..000000000
--- a/perl-install/share/po/pl.po
+++ /dev/null
@@ -1,10691 +0,0 @@
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-# Pawel Jablonski <pj@linux-mandrake.com>, 1999-2000.
-# Wojciech Karas <karas@uci.agh.edu.pl>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-08-10 10:57GMT+0200\n"
-"Last-Translator: Pawel Jablonski <pj@linux-mandrake.com>\n"
-"Language-Team: Polish <pl@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Konfiguruj wszystkie monitory niezale¿nie"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "U¿yj rozszerzenia Xinerama"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfiguruj tylko kartê \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Konfiguracja wielomonitorowa"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Twój system obs³uguje wiele monitorów.\n"
-"Co chcesz zrobiæ?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Karta graficzna"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Wybierz kartê graficzn±"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Wybierz X serwer"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X serwer"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Któr± konfiguracjê XFree chcesz mieæ?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Dla Twojej karty akceleracja 3D jest obs³ugiwana tylko przez XFree %s.\n"
-"Twoja karta jest obs³ugiwana przez XFree %s, gdzie mo¿e byæ wydajniejsza "
-"obs³uga 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Dla Twojej karty akceleracja 3D jest obs³ugiwana tylko przez XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s z obs³ug± sprzêtowej akceleracji 3D"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Dla Twojej karty akceleracja 3D jest obs³ugiwana przez XFree %s.\n"
-"JEST TO ROZWI¡ZANIE EKSPERYMENTALNE, MO¯E ZAWIESIÆ KOMPUTER."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s z EKSPERYMENTALN¡ obs³ug± sprzêtowej akceleracji 3D "
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Dla Twojej karty akceleracja 3D jest obs³ugiwana tylko przez XFree %s.\n"
-"JEST TO ROZWI¡ZANIE EKSPERYMENTALNE, MO¯E ZAWIESIÆ KOMPUTER.\n"
-"Twoja karta jest obs³ugiwana przez XFree %s, gdzie mo¿e byæ wydajniejsza "
-"obs³uga 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installation display driver)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "Konfiguracja XFree"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Okre¶l rozmiar pamiêci karty graficznej"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Wybierz opcje serwera"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Wybierz monitor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dwa krytyczne parametry to czêstotliwo¶æ synchronizacji pionowej,\n"
-"która okre¶la, jak czêsto od¶wie¿any jest ca³y ekran oraz najbardziej "
-"istotny\n"
-"- czêstotliwo¶æ synchronizacji poziomej - rysowania linii.\n"
-"\n"
-"Jest BARDZO WA¯NE aby nie podaæ typu monitora o wiêkszym zakresie\n"
-"czêstotliwo¶ci odchylania ni¿ mo¿liwo¶ci twojego monitora,\n"
-"poniewa¿ mo¿e to spowodowaæ jego uszkodzenie.\n"
-"Je¶li masz w±tpliwo¶ci, wybierz zachowawcze ustawienia."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Czêstotliwo¶æ synchronizacji poziomej"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Czêstotliwo¶æ synchronizacji pionowej"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Nie skonfigurowano monitora"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Nie skonfigurowano jeszcze karty graficznej"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Nie okre¶lono jeszcze rozdzielczo¶ci"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Chcesz przetestowaæ t± konfiguracjê?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Ostrze¿enie: testowanie tej karty mo¿e zawiesiæ komputer"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Test konfiguracji"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"spróbuj zmieniæ jakie¶ parametry"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Wyst±pi³ b³±d:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Pozostalo %d sekund"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Czy te ustawienia sa prawidlowe?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Wyst±pi³ b³±d, spróbuj zmieniæ jakie¶ parametry"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Rozdzielczo¶æ"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Okre¶l rozdzielczo¶æ oraz g³êbiê kolorów"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Karta graficzna: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Serwer XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Tryb eksperta"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Poka¿ wszystkie"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Rozdzielczo¶ci"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Uk³ad klawiatury: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Typ myszy: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Port myszy: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Synchronizacja pozioma monitora: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Synchronizacja pionowa monitora: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Karta graficzna: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Karta graficzna: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Pamiêæ karty: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Ilo¶æ kolorów: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rozdzielczo¶æ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Serwer XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Sterownik XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Przygotowywanie konfiguracji X-Window"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Co chcesz zrobiæ?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Zmieniæ monitor"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Zmieniæ kartê graficzn±"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Zmieniæ opcje serwera"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Zmieniæ rozdzielczo¶æ"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Obejrzeæ informacje"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Przetestowaæ ponownie"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Wyj¶æ"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Zachowaæ zmiany?\n"
-"Aktualna konfiguracja jest nastêpuj±ca:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "By uaktywniæ zmiany zaloguj siê ponownie do %s"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Wyloguj siê i u¿yj kombinacji klawiszy Ctrl-Alt-BackSpace "
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X przy uruchomieniu "
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Mo¿na skonfigurowaæ komputer, aby automatycznie po uruchomieniu startowa³y X-"
-"y.\n"
-"Czy chcesz, by X-y uruchamia³y siê po restarcie?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 kolorów (8 bitów)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tysi±ce kolorów (15 bitów)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tysiêcy kolorów (16 bitów)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milionów kolorów (24 bity)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardy kolorów (32 bity)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB lub wiêcej"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standardowa VGA, 640x480 przy 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 przy 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Zgodny z 8514, 1024x768 przy 87 Hz z przeplotem (bez 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 przy 87 Hz z przeplotem, 800x600 in 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Rozszerzona SVGA, 800x600 przy 60 Hz, 640x480 przy 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA bez przeplotu, 1024x768 przy 60 Hz, 800x600 przy 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Wysokoczêstotliwo¶ciowy SVGA, 1024x768 przy 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Wieloczêstotliwo¶ciowy do 1280x1024 przy 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Wieloczêstotliwo¶ciowy do 1280x1024 przy 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Wieloczêstotliwo¶ciowy do 1280x1024 przy 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor do 1600x1200 przy 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor do 1600x1200 przy 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Pierwszy sektor na partycji startowej"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Pierwszy sektor na dysku (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "Instalacja SILO"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Gdzie chcesz zainstalowaæ program rozruchowy?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "Instalacja LILO/Grub"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO z menu tekstowym"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO z menu graficznym"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Start z DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Podstawowe opcje programu rozruchowego"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "U¿yty program rozruchowy"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Instalacja programu rozruchowego"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Urz±dzenie startowe"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nie funkcjonuje ze starszymi BIOSami)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Odczytuj du¿e bloki"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "du¿e bloki"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Tryb video"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Opó¼nienie przed uruchomieniem domy¶lnego systemu"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Has³o"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Has³o (powtórnie)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Ograniczenie opcji linii komend"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "ograniczenie"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Wyczy¶ciæ /tmp przy ka¿dym starcie systemu"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Okre¶l rozmiar pamiêci, je¶li trzeba (znaleziono %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "W³±czyæ profile sprzêtowe?"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Podaj rozmiar pamiêci w MB"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcja \"Ograniczenie opcji linii komend\" nie dzia³a bez has³a"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Proszê spróbowaæ ponownie"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Has³a nie zgadzaj± siê"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Komunikat startowy"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Opó¼nienie uruchamiania"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Uaktywniæ uruchamianie z CD?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Enable OF Boot?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Domy¶lny system?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Masz nastêpuj±ce pozycje.\n"
-"Mo¿esz dodaæ nastêpne lub zmieniæ istniej±ce."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Dodaj"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Zrobione"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Modyfikuj"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Jakiego typu pozycjê chcesz dodaæ?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Inny system operacyjny (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Inny system operacyjny (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Inny system operacyjny (Windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Obraz"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Do³±cz"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Startowy ramdysk"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Zapis-odczyt"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tabela"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Niebezpieczne"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Etykieta"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Domy¶lne"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Rozmiar startowego ramdysku"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "brak video"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Usuñ pozycjê"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Pusta etykieta jest niedozwolona"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Ta etykieta jest ju¿ u¿ywana"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Znaleziono %s  %s interfejsów"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Masz inne?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Czy masz interfejs %s?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Nie"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Tak"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Poka¿ informacjê o sprzêcie"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalacja sterownika do karty %s %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(modu³ %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Który sterownik %s wypróbowaæ?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"W pewnych przypadkach sterownik %s potrzebuje dodatkowych\n"
-"informacji do poprawnego dzia³ania, mimo ¿e zazwyczaj dzia³a\n"
-"bez nich. Czy chcesz podaæ dodatkowe parametry, czy te¿ \n"
-"pozwolisz sterownikowi wykryæ je automatycznie?\n"
-"Czasami wykrywanie mo¿e zawiesiæ komputer, nie powoduje to\n"
-"jednak ¿adnych problemów (utraty danych)."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Autodetekcja"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Okre¶l parametry"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Mo¿esz teraz okre¶liæ parametry modu³u %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Mo¿esz przekazaæ do modu³u %s parametry.\n"
-"S± one w formacie \"nazwa1=warto¶æ1 nazwa2=warto¶æ2 ...\n"
-"Np. \"io=0x300 irq=7\" "
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Opcje modu³u:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Nieudane za³adowanie modu³u %s.\n"
-"Chcesz spróbowaæ z innymi parametrami?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(ju¿ dodano %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Has³o jest zbyt proste"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Proszê podaæ nazwê u¿ytkownika"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Nazwa u¿ytkownika mo¿e sk³adaæ siê tylko  z ma³ych liter, cyfr, `-'i `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Ten u¿ytkownik zosta³ ju¿ dodany"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Dodaj u¿ytkownika"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Podaj dane u¿ytkownika\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Akceptuj u¿ytkownika"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Nazwisko"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Identyfikator:"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Pow³oka"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Automatyczne logowanie"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Mo¿na skonfigurowaæ komputer, by automatycznie logowa³ u¿ytkownika\n"
-"w systemie. Je¶li nie chcesz korzystaæ z tej mo¿liwo¶ci, wybierz Anuluj."
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Wybierz domy¶lnego u¿ytkownika:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Wybierz uruchamiane ¶rodowisko graficzne:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Wybierz jêzyk u¿ywania systemu"
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Mo¿esz wybraæ inne jêzyki, które chcesz mieæ do dyspozycji po instalacji"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Wszystkie"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Witamy w programie wybierajacym system operacyjny- %s\n"
-"\n"
-"Wybierz system operacyjny z listy powyzej lub\n"
-"czekaj %d sekund na domyslny start.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Witamy w programie wybierajacym system - GRUB!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Uzyj %c i %c klawiszy , aby podswietlic pozycje."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Nacisnij Enter, aby zaladowac wybrany system operacyjny, `e' aby wyedytowac"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komendy przed zaladowaniem albo `c' , aby pracowac w linii polecen."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Podswietlony system zostanie uruchomiony po %d sekundach."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "nie ma ju¿ miejsca na /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Pulpit"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Menu startowe"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Gdzie chcesz zainstalowaæ program rozruchowy?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "brak pomocy.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfiguracja sposobu uruchamiania"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Plik"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Plik/Za_koñcz"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>k"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Wygl±d nowoczesny z kategoriami"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Styl nowoczesny"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Wygl±d tradycyjny"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Wygl±d tradycyjny Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Uaktywnij graficzny start"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Tryb Lilo/Grub"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"%s jest programem uruchamiaj±cym system (bootloaderem)\n"
-"Wybierz Konfiguruj, by uruchomiæ kreatora.."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Konfiguruj"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Tryb uruchamiania"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Tryb pracy systemu"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Uruchom X-Window po uruchomieniu"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Nie, nie chcê automatycznego logowania"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Tak, chcê dla tego u¿ytkownika korzystaæ z automatycznego logowania"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Anuluj"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "nie mo¿na otworzyæ dla odczytu /etc/inittab: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Instalacja LILO nie powiod³a siê. Wyst±pi³ nastêpuj±cy b³±d:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minut"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minuta"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekund"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Proszê zacz±æ od archiwizacji danych"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Czytaj uwa¿nie!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Je¿eli masz zamiar  u¿ywaæ aboot pamiêtaj, by zostawiæ, \n"
-"wolne miejsce na pocz±tku dysku - wystarczy 2048 sektorów."
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "B³±d"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Kreator"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Nowy"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "Kolejka sieciowa"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Punkt montowania"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Opcje"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Typ"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Odmontuj"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Montuj"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Wybierz czynno¶æ"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Na dysku jest jedna wielka partycja FAT.\n"
-"(zazwyczaj u¿ywana przez Microsoft Dos/Windows)\n"
-"Nale¿y zacz±æ od pomniejszenia tej partycji\n"
-"(kliknij na partycji, po czym kliknij na \"Zmieñ rozmiar\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Proszê klikn±æ na partycji"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Proszê klikn±æ na partycji"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Proszê klikn±æ na partycji"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Szczegó³y"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "nieudane montowanie"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Pusta"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Inna"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Typy systemu plików:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Utwórz"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "U¿yj zamiast tego ``%s'' "
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Usuñ"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Najpierw ``Odmontuj'' "
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Po zmianie typu partycji %s, wszystkie dane na niej zostan± utracone"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Gdzie chcesz zamontowaæ urz±dzenie %s?"
-
-#: ../../diskdrake.pm_.c:500
-#, fuzzy
-msgid "Mount options"
-msgstr "Opcje modu³u:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:525
-#, fuzzy
-msgid "Removable media"
-msgstr "Automatyczne montowanie wyjmowanych dysków"
-
-#: ../../diskdrake.pm_.c:532
-#, fuzzy
-msgid "Change type"
-msgstr "Zmiana typu partycji"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Jakiego systemu plików potrzebujesz?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Serwer"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Wybierz czynno¶æ"
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Utwórz now± partycjê"
-
-#: ../../diskdrake_interactive.pm_.c:188
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Prze³±cz na tryb zaawansowany"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Prze³±cz na tryb standardowy"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Cofnij"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Kontynuowaæ mimo to?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Wyj¶cie bez zapisywania"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Opu¶ciæ program bez zapisywania tablicy partycji?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Chcesz przetestowaæ t± konfiguracjê?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Rozmie¶æ automatycznie"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Wyczy¶æ wszystko"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Wiêcej"
-
-#: ../../diskdrake_interactive.pm_.c:250
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Wykrywanie dysków"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Brak wolnego miejsca dla automatycznego rozmieszczenia"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Wszystkie partycje podstawowe s± u¿ywane"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Nie mo¿na dodaæ wiêcej partycji"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"By mieæ wiêcej partycji, nale¿y usun±æ jedn±,\n"
-"by by³o mo¿liwe utworzenie partycji rozszerzonej."
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Zapisz tablicê partycji"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Odzyskaj tablicê partycji"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Odzyskaj tablicê partycji"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Odzyskaj tablicê partycji"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Automatyczne montowanie wyjmowanych dysków"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Wybierz plik"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Zapasowa tablica partycji ma inny rozmiar\n"
-"Kontynuowaæ?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Ostrze¿enie"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"W³ó¿ dyskietkê do stacji.\n"
-"Wszystkie dane na niej zostan± utracone"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Próba odzyskania tablicy partycji"
-
-#: ../../diskdrake_interactive.pm_.c:340
-#, fuzzy
-msgid "Detailed information"
-msgstr "Obejrzeæ informacje"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Zmieñ rozmiar"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Przesuñ"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formatuj"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Uaktywnij"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Dodaj do RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Dodaj do LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Usuñ z RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Usuñ z LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Modyfikuj RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "U¿yj na plikopartycjê"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Utwórz now± partycjê"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Sektor startowy: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Rozmiar w MB: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Typ systemu plików: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Punkt montowania: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Preferencja:"
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatowanie plikopartycji %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Zmiana typu partycji"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "Prze³±czenie z ext2 do ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Gdzie chcesz zamontowaæ plikopartycje %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nie mo¿na odmontowaæ tej partycji, gdy¿ jest u¿ywana przez plikopartycjê.\n"
-"Zacznij od usuniêcia plikopartycji."
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Obliczanie granic systemu plików FAT"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Zmiana rozmiaru"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Tej partycji nie mo¿na zmniejszyæ"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Wszystkie dane na tej partycji powinny zostaæ zarchiwizowane"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Po zmianie rozmiaru partycji %s, wszystkie dane na niej zostan± utracone"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Okre¶l nowy rozmiar"
-
-#: ../../diskdrake_interactive.pm_.c:591
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Rozmiar w MB: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Na który dysk chcesz przenie¶æ ?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Na który sektor chcesz przenie¶æ ?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Przenoszenie"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Przenoszenie partycji..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Wybierz istniej±cy RAID aby dodaæ do niego"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "nowy"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Wybierz istniej±cy LVM aby dodaæ do niego"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "Nazwa LVM?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Na tej partycji nie mo¿na za³o¿yæ plikopartycji"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Plikopartycja"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Nazwa plikopartycji: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nazwisko"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Plik jest ju¿ u¿ywany jako plikopartycja, wybierz inny"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Plik ju¿ istnieje. U¿yæ go?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "urz±dzenie"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "poziom"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "rozmiar kawa³ka"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Uwa¿aj: ta operacja jest niebezpieczna"
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Okre¶l sposób partycjonowania."
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Niestety, nie mo¿na utworzyæ /boot tak daleko na dysku (poza cylindrem "
-"1024)\n"
-"Albo u¿yjesz LILO, (nie bêdzie dzia³aæ), lub nie bêdziesz u¿ywaæ lilo\n"
-"i nie potrzebujesz /boot"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Doda³e¶ partycjê root (/) na dysku poza cylindrem 1024, nie ma te¿\n"
-"partycji /boot. Je¿eli wiêc chcesz u¿ywaæ programu rozruchowego lilo\n"
-"dodaj partycjê /boot poni¿ej cylindra 1024"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Wybra³e¶ jako partycjê root (/) programowy RAID.\n"
-"¯aden program rozruchowy nie jest w stanie obs³u¿yæ jej bez partycji /boot.\n"
-"Pamiêtaj wiêc o dodaniu partycji /boot."
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Tablica partycji napêdu %s bêdzie zapisana na dysk!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Nale¿y zrestartowaæ komputer przed uaktywnieniem zmian"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Po sformatowaniu wszystkie dane na partycji %s, zostan± utracone"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Formatowanie"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatowanie plikopartycji %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatowanie partycji %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid pad³"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Brak wolnego miejsca do stworzenia nowych partycji"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Brak wolnego miejsca do stworzenia nowych partycji"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Rozdzielczo¶æ: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Urz±dzenie: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Dosowy dysk: (przypuszczalnie %s)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Rodzaj: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Nazwa:"
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Pocz±tek: sektor  %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Rozmiar: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorów"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Cylinder %d do cylindra %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Sformatowana\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Nie sformatowana\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Zamontowano\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Plikopartycje:%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Domy¶lna partycja startowa\n"
-"    (dla startu MS-DOS, nie dla lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Poziom %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Rozmiar kawa³ka %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Dyski RAID %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nazwa plikopartycji: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Rozmiar: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cylindrów, %s g³owic, %s sektorów\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Informacje: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Dyski LVM %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Typ tabeli partycji: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na szynie %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Opcje: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatowania z %s nieudane"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nie wiadomo jak sformatowaæ %s typu %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "nieudane montowanie"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck zwróci³o kod b³êdu %d lub sygna³ %d"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "nieudane montowanie: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "b³±d odmontowania %s; %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "proste"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "serwer"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Nie mo¿na u¿ywaæ JFS na partycji mniejszej ni¿ 16MB"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Nie mo¿na u¿ywaæ ReiserFS na partycji mniejszej ni¿ 32MB"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Punkty montowania musz± zaczynaæ siê od /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Istnieje partycja z punktem montowania %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Nie mo¿n u¿yæ LVM dla punktu montowania %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Ten katalog powinien byæ wewn±trz systemu plików / (root)"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Dla tego punktu montowania potrzebujesz porz±dnego systemu plików (ext2,"
-"reiserfs)\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "B³±d otwarcia %s do zapisu: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Wyst±pi³ b³±d - nie znaleziono urz±dzeñ, na których mo¿na utworzyæ nowe \n"
-"systemy plików. Sprawd¼ sprzêt, by wykryæ przyczynê"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Nie masz ¿adnych partycji!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Powy¿ej pokazano wykryte na Twoim dysku istniej±ce partycje linuksowe\n"
-"Mo¿esz zastosowaæ wybór okre¶lony przez kreatora, s± one odpowiednie\n"
-"w wiêkszo¶ci przypadków. Jesli chcesz zmieniæ , musisz okre¶liæ co najmniej\n"
-"partycjê root (\"/\"). Nie wybieraj zbyt ma³ej partycji - nie bêdziesz móg³ "
-"wówczas\n"
-"zainstalowaæ zbyt du¿o oprogramowania. Je¶li chcesz trzymaæ swoje dane na \n"
-"oddzielnej partycji, mo¿esz tak¿e wybraæ \"/home\" (jest to mo¿liwe tylko, "
-"je¶li\n"
-"masz wiêcej ni¿ jedn± partycjê linuksow±\n"
-"\n"
-"\n"
-"Dla informacji, ka¿da partycja jest okre¶lona przez \"Nazwê\" i \"Rozmiar"
-"\".\n"
-"\n"
-"\n"
-"Nazwa jest okre¶lana nastêpuj±co: \"typ dysku\",\"numer dysku\",\n"
-"\"numer partycji\". (na przyk³ad \"hda1\").\n"
-"\n"
-"\n"
-"\"Typ dysku\" to \"hd\" w przypadku dysków IDE, \"sd\" w przypadku SCSI\n"
-"\n"
-"\n"
-"\"Numer dysku\" to litera po \"hd\" lub \"sd\". W przypadku dysku IDE:\n"
-"\n"
-"   * \"a\" oznacza pierwszy dysk na pierwszym kontrolerze IDE\n"
-"\n"
-"   * \"b\" oznacza drugi dysk na pierwszym kontrolerze IDE\n"
-"\n"
-"   * \"c\" oznacza pierwszy dysk na drugim kontrolerze IDE\n"
-"\n"
-"   * \"d\" oznacza drugi dysk na drugim kontrolerze IDE\n"
-"\n"
-"\n"
-"W przyadku dysków SCSI \"a\" oznacza pierwszy dysk twardy,\n"
-"\"b\" - drugi dysk twardy, itd."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Teraz mo¿esz wybraæ us³ugi, jakie chcesz mieæ w³±czone przy starcie\n"
-"systemu.\n"
-"\n"
-"\n"
-"Je¿eli najedziesz mysz± na element listy, to pojawi siê ma³y ob³oczek\n"
-"z opisem tej us³ugi.\n"
-"\n"
-"\n"
-"Zachowaj szczególn± ostro¿no¶æ przy wyborze, je¿eli chcesz u¿ywaæ\n"
-"swojej maszyny jako serwera - niektórych us³ug nie bêdziesz chcia³\n"
-"uruchamiaæ. Pamiêtaj, ¿e uruchomienie niektórych us³ug na serwerze\n"
-"mo¿e byæ niebezpieczne.\n"
-"W ogólno¶ci, uruchamiaj tylko te us³ugi, których naprawdê potrzebujesz."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux korzysta z czasu GMT \"Czas uniwersalny Greenwich\", t³umacz±c go\n"
-"na czas lokalny odpowiednio do wybranej strefy czasowej."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-#, fuzzy
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"W tym etapie instalacji okre¶lasz, gdzie na dysku zostanie zainstalowany\n"
-"Mandrake Linux. Je¶li dysk jest pusty lub istniej±ce systemy operacyjne\n"
-"zajmuj± ca³e dostêpne miejsce, nale¿y podzieliæ dysk na partycje\n"
-"Partycjonowanie to po prostu logiczny podzia³ twardego dysku na oddzielne\n"
-"obszary w celu zainstalowania systemu Mandrake Linux\n"
-"\n"
-"\n"
-"Poniewa¿ efekt partycjonowania jest nieodwracalny, czynno¶æ wydaje siê\n"
-"straszna i jest stresuj±ca dla niedo¶wiadczonych u¿ytkowników.\n"
-"Kreator ten upraszcza ten proces, tak wiêc nie siê czego obawiaæ,\n"
-"tym niemniej warto po¶wiêciæ nieco czasu na wcze¶niejsze\n"
-"zapoznanie siê z dokumentacj±\n"
-"\n"
-"\n"
-"Niezbêdne s± co najmniej 2 partycje: jedna dla systemu operacyjnego\n"
-"oraz druga na pamiêæ wirtualn± (swap).\n"
-"\n"
-"\n"
-"Je¶li partycje tes ju¿ zosta³y utworzone (w czasie poprzedniej instalacji\n"
-"lub przy pomocy innego narzêdzia), nale¿y je wybraæ do zainstalowania\n"
-"systemu Linux\n"
-"\n"
-"\n"
-"Je¶li partcje te nie istniej± , nale¿y je utworzyæ.\n"
-"By to zrobiæ, u¿yj powy¿szego kreatora. Mo¿liwych jest kilka rozwi±zañ\n"
-"zale¿nych od konfiguracji dysku twardego:\n"
-"\n"
-"* U¿ycie istniej±cych partycji: gdy kreator wykryje jedn± lub wiêcej "
-"istniej±cych partycji linuksowych,\n"
-"   wybierz to rozwi±zanie, je¶li chcesz u¿yæ te partycje na now± "
-"instalacjê.\n"
-"\n"
-"\n"
-"* Skasowanie zawarto¶ci ca³ego dysku: Je¶li chcesz skasowaæ ze swojego\n"
-"dysku wszystkie dane i wszystkie partycje\n"
-"  i zast±piæ nowym systemem Mandrake Linux, wybierz to rozwi±zanie. Pamiêtaj,"
-"w tym przypadku nie\n"
-"  nie ma mo¿liwo¶ci odwrotu po potwierdzeniu wyboru.\n"
-"\n"
-"\n"
-"*  U¿yj wolnego miejsca na partycji Windows: Je¶li na dysku jest "
-"zainstalowany\n"
-"Microsoft Windows i zajmuje \n"
-"  ca³e dostêpne miejsce,mo¿liwe jest utworzenie wolnego miejsca dla Linuksa. "
-"By to zrobiæ, mo¿na skasowaæ \n"
-"  partycjê Windows wraz z danymi (patrz \"Wyma¿ ca³y dysk\" lub \"Tryb "
-"eksperta\") lub zmieniæ\n"
-"  rozmiar partycji Windows. Zmiana rozmiaru jest realizowana bez\n"
-"utraty ¿adnych danych. \n"
-"  To rozwi±zanie jest zalecane, je¶li chcesz u¿ywaæ zarówno Linuksa-"
-"Mandrake, jak i Windows\n"
-"\n"
-"\n"
-"  Nale¿y pamiêtaæ, ¿e w ten sposób partycja Windows bêdzie mniejsza ni¿ do "
-"tej pory. Oznacza to\n"
-" mniej wolnego miejsca na dane oraz instalacjê nowych programów\n"
-"\n"
-"\n"
-"* Tryb eksperta: wybierz t± opcjê, je¶li chcesz partycjonowaæ swój dysk "
-"rêcznie.Pamiêtaj!\n"
-"  Wybranie tej opcji daje Ci du¿e mo¿liwo¶ci, lecz jest bardzo niebezpieczne."
-"Bardzo ³atwo mo¿na utraciæ wszystkie dane\n"
-"  Nie wybieraj wiêc tej opcji, je¶li naprawdê nie wiesz, co robisz!"
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Wszystkie nowo powsta³e partycje musz± zostaæ sformatowane przed\n"
-"wykorzystaniem (formatowanie oznacza utworzenie systemu plików).\n"
-"\n"
-"\n"
-"Mo¿na teraz tak¿e powtórnie sformatowaæ istniej±ce ju¿ partycje, by\n"
-"usun±æ znajduj±ce siê na nich dane. Je¶li chcesz to zrobiæ, zaznacz\n"
-"partycje do sformatowania\n"
-"\n"
-"\n"
-"Pamiêtaj, ¿e nie jest konieczne formatowanie wszystkich istniej±cych ju¿\n"
-"partycji. Nale¿y sformatowaæ partycje zawieraj±ce system operacyjny:\n"
-"\"/\", \"/usr\" oraz \"/var\", nie jest natomiast konieczne formatowanie\n"
-"partycji zawieraj±cych dane, które chcesz zachowaæ (zazwyczaj /home).\n"
-"Uwa¿nie wybieraj partycje do sformatowania, po sformatowaniu wszystkie\n"
-"dane zostan± utracone bez mo¿³iwo¶ci ich odzyskania.\n"
-"\n"
-"\n"
-"Wybierz \"OK\", je¶li jeste¶ ju¿ gotowy do formatowania partycji.\n"
-"\n"
-"\n"
-"Wybierz \"Anuluj\", je¶li chcesz wybraæ do zainstalowania\n"
-"Linuksa-Mandrake inne partycje."
-
-#: ../../help.pm_.c:376
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Trwa instalacja systemu operacyjnego Mandrake Linux.\n"
-"Zabierze to trochê czasu (w zale¿no¶ci od ilo¶ci  wybranych pakietów\n"
-"oraz szybko¶ci komputera)\n"
-"\n"
-"\n"
-"B±d¼ cierpliwy."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-#, fuzzy
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"W tym etapie instalacji wybierasz partycje, na których bêdzie instalowany\n"
-"Mandrake Linux, je¶li istniej±, np. pozosta³y po poprzedniej instalacji,\n"
-"lub te¿ zosta³y za³o¿one innym narzêdziem. W przeciwnym razie nale¿y je\n"
-"utworzyæ. Operacja ta polega na logicznym podziale dysku twardego komputera\n"
-"na na oddzielne obszary\n"
-"\n"
-"\n"
-"Utworzenie partycji nale¿y rozpocz±æ od wybrania dysku. Robi siê to przez\n"
-"klikniêcie na zak³adce \"hda\" dla pierwszego dysku IDE, \"hdb\" dla "
-"drugiego,\n"
-"lub \"sda1\" dla pierwszego dysku SCSI, itd.\n"
-"\n"
-"\n"
-"W celu podzielenia dysku na partycje mo¿na u¿yæ nastêpuj±cych opcji:\n"
-"\n"
-"   * Wyczy¶æ wszystko: ta opcja kasuje wszystkie partycje na wybranym "
-"dysku.\n"
-"\n"
-"\n"
-"   * Rozmie¶æ automatycznie: ta opcja automatycznie tworzy partycje ext2\n"
-"     oraz swap na wolnym (niespartycjonowanym) miejscu dysku\n"
-"\n"
-"\n"
-"   * Odzyskaj tablicê partycji: je¶li tablica partycji jest uszkodzona, "
-"mo¿na\n"
-"     spróbowaæ j± odzyskaæ przy pomocy tej opcji. B±d¼ ostro¿ny i pamiêtaj,\n"
-"¿e ta opcja mo¿e zawie¶æ\n"
-"\n"
-"\n"
-"   * Cofnij: u¿yj tej opcji by anulowaæ zmiany.\n"
-"\n"
-"\n"
-"   * Prze³aduj: u¿yj tej opcji, je¶li chcesz cofn±æ wszystkie zmiany i "
-"za³adowaæ\n"
-"     pocz±tkow± tablicê partycji\n"
-"\n"
-"\n"
-"   * Kreator: Mo¿esz u¿yæ kreatora, który pomo¿e Ci podzieliæ dysk na "
-"partycje\n"
-"     Zalecane, je¶li niewiele wiesz o podziale na partycje.\n"
-"\n"
-"\n"
-"   * Przywróæ z dyskietki: je¶li podczas poprzedniej instalacji zapisa³e¶ "
-"tabelê\n"
-"     partycji na dyskietce, mo¿esz odzyskaæ j± korzystaj±c z tej opcji.\n"
-"\n"
-"\n"
-"   * Zapisz na dyskietkê: Mo¿esz zapisaæ na dyskietkê tablicê partycji, by "
-"mieæ\n"
-"     mo¿liwo¶æ jej odzyskania w przypadku pomy³ki\n"
-"     U¿ycie tej opcji jest bardzo zalecane\n"
-"\n"
-"\n"
-"   * Zrobione: po zakoñczeniu partycjonowania dysku u¿yj tej opcji do "
-"zapisania\n"
-"     na dysku zmian.\n"
-"\n"
-"\n"
-" Mo¿esz wybraæ odpowiedni± opcjê u¿ywaj±c klawisza \n"
-"TAB i strza³ek góra/dó³ klawiatury. \n"
-"\n"
-"\n"
-"Po wybraniu partycji mo¿esz nacisn±æ:\n"
-"\n"
-"           * Ctrl-c by utworzyæ now± partycjê ( je¿eli zosta³ wybrany pusty "
-"obszar\n"
-"\n"
-"           * Ctrl-d by usun±æ partycjê\n"
-"\n"
-"           * Ctrl-m by okre¶liæ punkt montowania"
-
-#: ../../help.pm_.c:460
-#, fuzzy
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Na dysku wykryto wiêcej ni¿ jedn± partycjê Windows. Wybierz, któr±\n"
-"z nich chcesz zmniejszyæ w celu zainstalowania Mandrake Linux\n"
-"\n"
-"\n"
-"Dla informacji, ka¿da partycja jest okre¶lona przez\n"
-" \"Nazwê linuksow±\", \"Nazwê Windows\" i \"Rozmiar\".\n"
-"\n"
-"\n"
-"Nazwa linuksowa jest okre¶lana nastêpuj±co: \"typ dysku\",\"numer dysku\",\n"
-"\"numer partycji\". (na przyk³ad \"hda1\").\n"
-"\n"
-"\n"
-"\"Typ dysku\" to \"hd\" w przypadku dysków IDE, \"sd\" w przypadku SCSI\n"
-"\n"
-"\n"
-"\"Numer dysku\" to litera po \"hd\" lub \"sd\". W przypadku dysku IDE:\n"
-"\n"
-"   * \"a\" oznacza pierwszy dysk na pierwszym kontrolerze IDE\n"
-"\n"
-"   * \"b\" oznacza drugi dysk na pierwszym kontrolerze IDE\n"
-"\n"
-"   * \"c\" oznacza pierwszy dysk na drugim kontrolerze IDE\n"
-"\n"
-"   * \"d\" oznacza drugi dysk na drugim kontrolerze IDE\n"
-"\n"
-"\n"
-"W przyadku dysków SCSI \"a\" oznacza pierwszy dysk twardy,\n"
-"\"b\" - drugi dysk twardy, itd.\n"
-"\n"
-"\"Nazwa Windows\" to litera dysku pod Windows (pierwszy dysk \n"
-"lub partycja to \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "B±d¼ cierpliwy. Ta operacja mo¿e potrwaæ kilkana¶cie minut."
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Wybierz \"Instalacja\" je¶li nie masz zainstalowanej starszej wersji\n"
-"Mandrake Linux, lub je¶li chcesz u¿ywaæ wielu dystrybucji lub wersji.\n"
-"\n"
-"\n"
-"Wybierz \"Aktualizacja\" je¶li chcesz zaktualizowaæ ju¿ zainstalowan± wersjê "
-"Mandrake Linux:\n"
-"\n"
-"\n"
-"W zale¿no¶ci od poziomu Twojej znajomo¶ci GNU/Linuksa mo¿esz wybraæ jeden z "
-"nastêpuj±cych sposobów  instalacji\n"
-" lub aktualizacji systemu operacyjnego Mandrake Linux.\n"
-"\n"
-"* Zalecany: Je¶li nie instalowa³e¶ GNU/Linuksa nigdy wcze¶niej, wybierz ten "
-"sposób instalacji,\n"
-"  jest bardzo prosty, odpowiesz na kilka prostych pytañ\n"
-"\n"
-"\n"
-"* U¿ytkownika: Je¶li jeste¶ obeznany z GNU/Linux, mo¿esz okre¶liæ podstawowe "
-"zastosowanie komputera. (stacja robocza, serwer\n"
-"  programowanie). Odpowiesz tak¿e na wiêcej pytañ, ni¿ przy sposobie "
-"instalacji \"Zalecany\".\n"
-"  tak wiêc powiniene¶ trochê znaæ GNU/Linuksa, by wybraæ ten "
-"rodzajinstalacji\n"
-"\n"
-"\n"
-"* Ekspert: Je¶li dobrze znasz  GNU/Linuksa, wybierz ten sposób instalacji "
-"Podobnie jak w instalacji \"U¿ytkownika\", bêdziesz móg³ okre¶liæ podstawowe "
-"zastosowanie komputera. Przemy¶l,\n"
-" czy na pewno chcesz wybraæ ten rodzaj instalacji. Bêdziesz móg³ "
-"przeprowadziæ bardzo zindywidualizowan± instalacjê, lecz\n"
-"  odpowied¼ na niektóre pytania mo¿e byæ bardzo trudna bez dobrej znajomo¶ci "
-"GNU/Linuksa.\n"
-"  Nie wybieraj wiêc tego rodzaju instalacji, je¶li nie jeste¶ pewien."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Wybierz w³a¶ciwy port. Na przyk³ad COM1 z MS Windows\n"
-"w GNU/Linux nazywa siê ttyS0."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO ( LInux LOader ) i Grub to programy rozruchowe: potrafi± uruchomiæ\n"
-"GNU/Linux lub inny system operacyjny, zainstalowany na twoim komputerze.\n"
-"Zazwyczaj inne istniej±ce w komputerze systemy s± prawid³owo wykrywane\n"
-"i instalowane. Je¿eli tak nie jest, powiniene¶ \"rêcznie\" wprowadziæ\n"
-"odpowiednie dane. Uwa¿nie wybieraj w³a¶ciwe parametry.\n"
-"\n"
-"\n"
-"Mo¿esz oczywi¶cie równie¿ uniemo¿liwiæ dostêp do nich przy starcie przez \n"
-"usuniêcie ich z listy. W tej sytuacji musisz jednak posiadaæ dyskietki\n"
-"startowe, by je uruchomiæ."
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Powiniene¶ wskazaæ, gdzie chcesz\n"
-"umie¶ciæ informacje wymagane do uruchomienia GNU/Linuxa\n"
-"\n"
-"\n"
-"Je¶li nie wiesz dok³adnie, co robisz, wybierz\n"
-" \"Pierwszy sektor na dysku (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"Instalator spróbuje wykryæ kontroler(y) SCSI na magistrali PCI.\n"
-"Je¶li je odnajdzie i rozpozna, które sterowniki nale¿y u¿yæ\n"
-"za³aduje je automatycznie.\n"
-"\n"
-"Je¶li posiadasz kontroler  SCSI ISA, lub PCI, ale instalator nie\n"
-"wykryje sterownika do niego, zostaniesz zapytany, czy w Twoim\n"
-"systemie istnieje kontroler SCSI. Je¶li nie masz ¿adnego, odpowiedz\n"
-"\"Nie\", je¶li masz jeden lub wiêcej, odpowiedz \"Tak\". Uka¿e siê\n"
-"wówczas lista sterowników, z której nale¿y wybraæ w³a¶ciwy.\n"
-"\n"
-"\n"
-"Po wybraniu sterownika, instalator spyta Ciê, czy chcesz okre¶liæ\n"
-"opcje dla niego. Pozwól sterownikowi automatycznie wykryæ \n"
-"ustawienia, zazwyczaj dzia³a to dobrze\n"
-"\n"
-"\n"
-"Je¶li nie, podaj sterownikowi opcje znalezione w dokumentacji,\n"
-"na stronie producenta sprzêtu (je¶li masz dostêp do Internetu)\n"
-"lub takie, jak w Windows (je¶li je posiadasz). Podrêcznik instalacji\n"
-"pomo¿e Ci odnale¼æ potrzebne parametry."
-
-#: ../../help.pm_.c:720
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"You can add additional entries for yaboot, either for other operating "
-"systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"\n"
-"For other OS's - the entry consists only of a label and the root partition.\n"
-"\n"
-"\n"
-"For Linux, there are a few possible options: \n"
-"\n"
-"\n"
-"  - Label: This is simply the name will type at the yaboot prompt to select "
-"this \n"
-"boot option.\n"
-"\n"
-"\n"
-"  - Image: This would be the name of the kernel to boot.  Typically vmlinux "
-"or\n"
-"a variation of vmlinux with an extension.\n"
-"\n"
-"\n"
-"  - Root: The root device or '/' for your Linux installation.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: On Apple hardware, the kernel append option is used quite often "
-"to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button "
-"emulation\n"
-"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The "
-"following \n"
-"are some examples:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: This option can be used either to load initial modules, before "
-"the boot \n"
-"device is available, or to load a ramdisk image for an emergency boot "
-"situation.\n"
-"\n"
-"\n"
-"  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you "
-"should need\n"
-"to allocate a large ramdisk, this option can be used.\n"
-"\n"
-"\n"
-"  - Read-write: Normally the 'root' partition is initially brought up read-"
-"only, to allow\n"
-"a filesystem check before the system becomes 'live'.  You can override this "
-"option here.\n"
-"\n"
-"\n"
-"  - NoVideo: Should the Apple video hardware prove to be exceptionally "
-"problematic, you can\n"
-"select this option to boot in 'novideo' mode, with native framebuffer "
-"support.\n"
-"\n"
-"\n"
-"  - Default: Selects this entry as being the default Linux selection, "
-"selectable by just\n"
-"pressing ENTER at the yaboot prompt.  This entry will also be highlighted "
-"with a '*', if you\n"
-"press TAB to see the boot selections."
-
-#: ../../help.pm_.c:765
-#, fuzzy
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n"
-"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"Yaboot main options are:\n"
-"\n"
-"\n"
-"  - Init Message: A simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-"\n"
-"  - Boot Device: Indicate where you want to place the information required "
-"to \n"
-"boot to GNU/Linux. Generally, you will have setup a bootstrap partition "
-"earlier \n"
-"to hold this information.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: Unlike LILO, there are two delays available with \n"
-"yaboot.  The first delay is measured in seconds and at this point you can \n"
-"choose between CD, OF boot, MacOS, or Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: This timeout is similar to the LILO boot delay.  "
-"After \n"
-"selecting Linux, you will have this delay in 0.1 seconds before your "
-"default\n"
-"kernel description is selected.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: Checking this option will allow you to choose 'C' for "
-"CD at\n"
-"the first boot prompt.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: Checking this option will allow you to choose 'N' for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-"\n"
-"  - Default OS: You can select which OS will boot by default when the Open "
-"Firmware \n"
-"Delay expires."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Wybierz dysk, który chcesz wykasowaæ, by za³o¿yæ na nim\n"
-"partycje Mandrake Linux. Pamiêtaj, ¿e wszystkie dane z tego\n"
-"dysku zoastan± utracone bez mo¿liwo¶ci odzyskania."
-
-#: ../../help.pm_.c:832
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Wybierz \"OK\", je¶li chcesz usun±æ dane na wszystkich partycjach\n"
-"istniej±cych na dysku. Pamiêtaj, po wybraniu \"OK\", nie bêdzie\n"
-"mo¿liwe odzyskanie ¿adnych danych z partycji (tak¿e Windows)\n"
-"\n"
-"\n"
-"Wybierz \"Anuluj\", by anulowaæ t± operacjê bez utraty danych."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Wybrano nastêpuj±ce serwery: %s\n"
-"\n"
-"\n"
-"Bêd± one domy¶lnie uruchamiane. Nie zawieraj± one ¿adnych znanych b³êdów\n"
-"zwi±zanych z bezpieczeñstwem, lecz mog± one zostaæ w przysz³o¶ci ujawnione.\n"
-"W takiej sytuacji nale¿y dokonaæ jak najszybszego uaktualnienia.\n"
-"\n"
-"\n"
-"Czy na pewno chcesz zainstalowaæ te serwery?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Nie u¿ywaj rozg³aszania przy braku domeny NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "W³ó¿ sformatowan± (FAT) dyskietkê do stacji %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Ten dysk nie jest sformatowany."
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"By u¿yæ zapisanej listê pakietów, nale¿y uruchomiæ instalacjê z opcj± "
-"''linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "B³±d odczytu pliku %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Czê¶æ sprzêtu w Twoim komputerze wymaga \"firmowych\" sterowników.\n"
-"Wiêcej informacji na ten temat uzyskasz z %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Musisz mieæ partycjê root.\n"
-"W tym celu, utwórz partycjê ( lub kliknij na istniej±c±),\n"
-"nastêpnie Wybierz \"Punkt montowania\" `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Musisz mieæ partycjê wymiany (swap)"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nie masz partycji swap\n"
-"\n"
-"Kontynuowaæ mimo to?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Musisz mieæ partycjê FAT zamontowan± w /boot/efi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Wykorzystaj wolne miejsce"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Brak wolnego miejsca do stworzenia nowych partycji"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "U¿yj istniej±cej partycji"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Brak istniej±cych partycji do wykorzystania"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Wykorzystaj miejsce na partycji Windows na plikopartycjê"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Któr± partycjê chcesz u¿yæ dla Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Okre¶l rozmiary"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Rozmiar partycji root w MB:"
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Rozmiar partycji swap w MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Wykorzystaj wolne miejsce na partycji Windows"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Któr± partycjê chcesz zmniejszyæ?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Obliczanie granic systemu plików Windows"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Program zmniejszaj±cy partycjê FAT nie potrafi obs³u¿yæ\n"
-"Twojej partycji. Wyst±pi³ nastêpuj±cy b³±d: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Twoja partycja Windows jest zbyt sfragmentowana, uruchom \"defrag\""
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"OSTRZE¯ENIE!\n"
-"\n"
-"Instalator zmieni teraz rozmiar partycji Windows.\n"
-"Uwa¿aj, jest to niebezpieczne. Je¶li wcze¶niej tego nie zrobi³e¶,\n"
-"nale¿y przerwaæ instalacjê, wróciæ do Windows, zeskanowaæ\n"
-"i zdefragmentowaæ dysk po czym powtórnie uruchomiæ instalacjê. \n"
-"Warto równie¿ zarchiwizowaæ dane na dysku.\n"
-"Je¶li jeste¶ pewny, wybierz OK."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Jaki ma byæ docelowy rozmiar partycji Windows?"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "partycja %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Zmiana rozmiaru partycji FAT nie powiod³a siê: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nie ma partycji FAT do zmiany rozmiaru lub u¿ycia jako plikopartycjên(lub "
-"brak wolnego miejsca)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Wyma¿ ca³y dysk"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Usuñ Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Masz wiêcej ni¿ 1 dysk twardy, na którym z nich chcesz zainstalowaæ linuxa?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"WSZYSTKIE istniej±ce partycje i dane na nich zostan± usuniête z dysku %s"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Zaawansowany podzia³ na partycje"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "U¿yj fdiska"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Mo¿esz teraz tworzyæ partycje  %s \n"
-"Gdy skoñczysz, pamiêtaj o zapisaniu u¿ywaj±c `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Masz za ma³o wolnego miejsca na partycji Windows"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Brak miejsca na instalacjê"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Kreator podzia³u na partycje proponuje nastêpuj±ce rozwi±zania:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partycjonowanie nie powiod³o siê: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Uruchamianie sieci"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Zatrzymywanie sieci"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Wyst±pi³ jaki¶ b³±d. Nie mo¿na poprawnie go obs³u¿yæ\n"
-"Kontynuuj na w³asn± odpowiedzialno¶æ."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Powielony punkt montowania %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Pewne istotne pakiety nie zosta³y poprawnie zainstalowane.\n"
-"Prawdopodobnie uszkodzona jest p³yta lub napêd CDROM.\n"
-"Sprawd¼ p³ytê w innym komputerze u¿ywaj±c polecenia:\n"
-"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Witamy w %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Niedostêpna stacja dyskietek"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Przechodzê do kroku `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Okre¶l rozmiar przeznaczony na instalacjê"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Ca³kowity rozmiar: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Wersja: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Rozmiar: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Wybierz pakiety do zainstalowania"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Informacje"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Instalacja"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Instalowanie"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Proszê czekaæ, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Pozosta³o czasu "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Ca³kowity czas "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Przygotowywanie instalacji"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalowanie pakietu %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Kontynuowaæ?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Wyst±pi³ b³±d porz±dkowania pakietów:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Wykorzystaæ istniej±c± konfiguracjê X11?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Twój system ma ma³o zasobów. Mog± wyst±piæ problemy z instalacj±.\n"
-"Je¶li tak siê stanie, spróbuj instalacji w trybie tekstowym.\n"
-"By j± uruchomiæ, naci¶nij F1 podczas startu z CD i wpisz \"text\"."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Klasa instalacji"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Wybierz jedn± z nastêpuj±cych klas instalacji:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ca³kowity rozmiar dla wybranych grup to oko³o %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Je¿eli chcesz zainstalowaæ mniej,\n"
-"podaj procentowo rozmiar, który mo¿esz przeznaczyæ na instalacjê.\n"
-"Ma³y procent spowoduje instalacjê tylko najwa¿niejszych pakietów,\n"
-"100%% spowoduje zainstalowanie wszystkich wybranych pakietów."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Masz miejsce na dysku tylko na %d%% pakietów.\n"
-"\n"
-"Je¶li chcesz zainstalowaæ mniej, okre¶l procentowo, ile pakietów\n"
-" chcesz zainstalowaæ. Ma³y procent spowoduje instalacjê tylko\n"
-"najwa¿niejszych pakietów,\n"
-"Wybór  %d%% spowoduje zainstalowanie tylu pakietów ile siê da."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "W nastêpnym kroku mo¿na bêdzie wybraæ bardziej precyzyjnie"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procent pakietów do instalacji"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Wybór grup pakietów"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Samodzielny wybór pakietów"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ca³kowity rozmiar: %d  / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Pakiet uszkodzony"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nazwa: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Wa¿no¶æ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Nie mo¿esz wybraæ tego pakietu. Nie ma ju¿ miejsca, by go zainstalowaæ"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Zostan± zainstalowane nastêpuj±ce pakiety"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Zostan± usuniête nastêpuj±ce pakiety"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Nie mo¿na zmieniæ statusu tego pakietu."
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ten pakiet jest konieczny, nie mo¿na go pomin±æ"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Nie mo¿na odznaczyæ tego pakietu. Zosta³ ju¿ zainstalowany."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ten pakiet musi byæ uaktualniony.\n"
-"Jeste¶ pewien, ¿e chcesz go odznaczyæ?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Nie mo¿na odznaczyæ tego pakietu. Musi zostaæ zamieniony na nowszy"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Poka¿ automatycznie wybrane pakiety"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Odczytaj/Zapisz na dyskietkê"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "Uaktualnianie listy wybranych pakietów"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "Minimalna instalacja"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Szacowanie"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Proszê czekaæ, trwa przygotowywanie instalacji"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d pakietów"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Akceptuj"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Odrzuæ"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Zmieñ p³ytê CD!\n"
-"\n"
-"W³ó¿ p³ytê zatytu³owan± \"%s\" do kieszeni czytnika i naci¶nij Ok.\n"
-"Je¶li jej nie masz, naci¶nij Anuluj, by omin±æ instalacjê pakietów z niej"
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Wyst±pi³ b³±d podczas instalowania pakietów:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Wyst±pi³ b³±d"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Umowa licencyjna"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klawiatura"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Wybierz uk³ad klawiatury."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Oto lista dostêpnych uk³adów klawiatury"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Okre¶l klasê instalacji"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Instalacja/Uaktualnienie"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Czy to instalacja, czy uaktualnienie?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Zalecana"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Dla eksperta"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Uaktualnienie"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Wybierz typ myszy."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Port myszy"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Do którego portu szeregowego jest pod³±czona mysz?"
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Emulacja przycisków"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Emulacja 2 przycisku"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Emulacja 3 przycisku"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfiguracja kart PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Konfiguracja IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "brak dostêpnych partycji"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Przeszukiwanie partycji w celu okre¶lenia punktów montowania"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Wybierz punkty montowania"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Nie mo¿na odczytaæ tablicy partycji, jest zbyt uszkodzona :(\n"
-"Mo¿na kontynuowaæ USUWAJ¡C WSZYSTKIE DANE\n"
-"Innym rozwi±zaniem jest zabronienie instalatorowi modyfikowania tabeli "
-"partycji\n"
-" (wyst±pi³ b³±d: %s)\n"
-"\n"
-"Czy zgadzasz siê na utratê wszystkich partycji?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Instalator nie mo¿e odczytaæ poprawnie tablicy partycji.\n"
-"Kontynuuj na w³asn± odpowiedzialno¶æ!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Brak wolnej przestrzeni na 1MB bootstrap. Instalacja bêdzie kontynuowana,\n"
-"lecz nale¿y utworzyæ partycjê bootstrap."
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr ""
-"Nie znaleziono partycji root, na której mo¿na przeprowadziæ aktualizacjê"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Partycja root"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Która partycja jest w Twoim systemie partycj± root (/)"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Nale¿y zrestartowaæ komputer w celu uaktywnienia zmian w tablicy partycji"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Wybierz partycje do sformatowania"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Sprawdziæ fizycznie partycje?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Formatowanie partycji"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Tworzenie i formatowanie plikopartycji %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Wielko¶æ partycji wymiany jest niewystarczaj±ca, nale¿y j± zwiêkszyæ"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Wyszukiwanie dostêpnych pakietów"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Wyszukiwanie pakietów do uaktualnienia"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "Zbyt ma³o miejsca na instalacjê lub uaktualnienie (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Pe³na (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimalna (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Zalecana (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "U¿ytkownika"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Proszê wybraæ odczytanie lub zapis listy wybranych pakietów\n"
-"na dyskietkê. Format jest identyczny z dyskiem automatycznej\n"
-"instalacji."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Odczytaj z dyskietki"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Odczytywanie z dyskietki"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Wybór pakietów"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "W³ó¿ dyskietkê zawieraj±c± listê wybranych pakietów"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Zapisz na dyskietkê"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Wybrany rozmiar przekracza dostêpne miejsce"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Je¿eli masz wszystkie p³yty CD z listy, kliknij Ok.\n"
-"Je¿eli nie masz ¿adnej z p³yt z listy, kliknij Anuluj.\n"
-"Je¿eli niektórych p³yt z listy nie masz, odznacz je i kliknij  Ok."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM oznaczony \"%s\" "
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalowanie pakietu %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Konfiguracja poinstalacyjna"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "W³ó¿ dyskietkê startow± do stacji %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "W³ó¿  dyskietkê z uaktalnionymi modu³ami do stacji %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Masz teraz mo¿liwo¶æ pobrania z sieci oprogramowania, s³u¿±cego do "
-"szyfrowania\n"
-"\n"
-"OSTRZE¯ENIE:\n"
-"Z powodu ró¿nych ograniczeñ prawnych maj±cych zastosowanie do \n"
-"tego oprogramowania, Klient lub (i) u¿ytkownik powinien byæ pewien,\n"
-"¿e przepisy go dotycz±ce pozwalaj± na kopiowanie, przechowywanie\n"
-"i u¿ywanie tego oprogramowania.\n"
-"\n"
-"Dodatkowo klient lub (i) u¿ytkownik, powinien byæ ostrze¿ony,\n"
-"aby nie z³amaæ praw obowi±zuj±cych w jego jurysdykcji.\n"
-"Je¿eli klient lub (i) u¿ytkownik nie przestrzega³by obowi±zuj±cych \n"
-"go przepisów, mog± dotkn±æ go powa¿ne sankcje.\n"
-"\n"
-"Ani Mandrakesoft ani jego producenci lub dostawcy nie s± odpowiedzialni\n"
-"za jakiekolwiek celowe, przypadkowe lub po¶rednie szkody\n"
-"powsta³e z u¿ywania, posiadania lub tylko zainstalowania oprogramowania,\n"
-"do którego klient lub (i) u¿ytkownik bêdzie mia³ dostêp po wyra¿eniu \n"
-"zgody na powy¿sze zastrze¿enia .\n"
-"Wszystkie zapytania, dotycz±ce niniejszego uzgodnienia proszê kierowaæ do:\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Wybierz mirror, z którego chcesz pobraæ pakiety"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "£±czenie z mirrorem - pobieranie listy dostêpnych pakietów"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Wybierz pakiety do zainstalowania."
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Wybierz swoj± strefê czasow±."
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "Ustawienie zegar sprzêtowego na czas GMT"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatyczna synchronizacja czasu (przy u¿yciu NTP)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "Serwer NTP"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Zdalny serwer CUPS"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Brak drukarki"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Ró¿ne"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Mysz"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Strefa czasowa"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Drukarka"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "Karta ISDN"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Karta d¼wiêkowa"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "Karta TV"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Pliki lokalne"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Has³o roota"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Bez has³a"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "To has³o jest zbyt proste ( musi byæ co najmniej %d znaków)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Autentykacja"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "Autentykacja LDAP"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "Serwer LDAP"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "Autentykacja NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "Domena NIS"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "Serwer NIS"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Dysk startowy umo¿liwia uruchomienie systemu Linux niezale¿nie od "
-"normalnego\n"
-"programu rozruchowego. Jest u¿yteczny, je¶li nie chcesz instalowaæ SILO,\n"
-"lub SILO w Twoim systemie nie dzia³a oraz je¶li inny system operacyjny\n"
-"usun±³ SILO. Dysk u¿ytkownika mo¿na tak¿e u¿ywaæ z obrazem ratunkowym,\n"
-"u³atwiaj±c naprawienie systemu w przypadku awarii.\n"
-"Je¶li chcesz utworzyæ dysk startowy dla swojego systemu, w³ó¿ dyskietkê\n"
-"do stacji i wybierz \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Pierwsza stacja dyskietek"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Druga stacja dyskietek"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Pomiñ"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Dysk startowy umo¿liwia uruchomienie systemu Linux niezale¿nie od\n"
-"normalnego programu rozruchowego. Jest u¿yteczny, je¶li nie chcesz\n"
-"instalowaæ LILO/Grub, lub programy te w Twoim systemie nie dzia³aj±\n"
-"oraz je¶li inny system operacyjny usun±³ LILO/grub.\n"
-"Dysku tego mo¿na tak¿e u¿ywaæ z obrazem ratunkowym,\n"
-"u³atwiaj±c naprawienie systemu w przypadku awarii.\n"
-"Czy chcesz dla swojego systemu utworzyæ dysk startowy?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Niestety, stacja dyskietek jest niedostêpna."
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Wybierz stacjê dyskietek, której u¿yjesz do stworzenia dysku startowego"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "W³ó¿ dyskietkê do stacji %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Tworzenie dysku startowego"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Przygotowanie programu rozruchowego"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Czy chcesz u¿ywaæ aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"B³±d podczas instalowania aboot. \n"
-"Wymusiæ instalacjê, nawet gdyby grozi³o to zniszczeniem pierwszej partycji?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Program rozruchowy"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Instalacja programu rozruchowego nie powiod³a siê. Wyst±pi³ nastêpuj±cy b³±d:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Niski"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "¦redni"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Wysoki"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Wybierz poziom bezpieczeñstwa"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "W³ó¿ pust± dyskietkê do stacji %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Tworzenie dyskietki automatycznej instalacji"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Pewne etapy instalacji nie zosta³y zakoñczone\n"
-"\n"
-"Czy na pewno chcesz teraz zakoñczyæ?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratulacje, instalacja zosta³a zakoñczona.\n"
-"Usuñ p³ytê i (lub) dyskietkê z napêdów i naci¶nij enter, by zrestartowaæ.\n"
-"\n"
-"Informacje o poprawkach dotycz±cych tej wersji Mandrake Linux\n"
-"znajdziesz na stronach http://www.mandrakelinux.com/.\n"
-"Informacje o konfiguracji systemu znajduj± siê\n"
-"w Oficjalnym Podrêczniku U¿ytkownika Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Tworzenie dyskietki automatycznej instalacji"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Automatyczna instalacja mo¿e byæ, je¶li jest taka potrzeba\n"
-"przeprowadzona w sposób ca³kowicie samodzielny.\n"
-"Zajmie ona wówczas ca³y dysk,\n"
-"co ma znaczenie przy instalacj na innym komputerze.\n"
-"\n"
-"Mo¿na za¿yczyæ sobie odtworzenia instalacji.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automatyczna"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Odtwórz ponownie"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Zapisz listê wybranych pakietów"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalacja Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> miêdzy element.  | <Spacja> wybór | <F12> nastêpny ekran "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "brakuje kdesu"
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "Wybierz czynno¶æ"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Zaawansowane"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Proszê czekaæ"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Rozwiñ drzewo"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Zwiñ drzewo"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Prze³±cz miêdzy p³askim i grupowym sortowaniem"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Niejednoznaczny (%s), sprecyzuj\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Z³y wybór, spróbuj ponownie\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr "? (domy¶lnie %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Twój wybór? (domy¶lnie %s)"
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Twój wybór? (domy¶lnie %s, wpisz \"none\" dla ¿adnego) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "czeski (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "niemiecki"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvoraka"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "hiszpañski"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "fiñski"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "francuski"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "norweski"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "polski"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "rosyjski"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "szwedzki"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "angielski"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "amerykañski"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "albañski"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "armeñski (stary)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "armeñski - fonetyczny"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "armeñski - fonetyczny"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "azerski (latin)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "belgijski"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "bu³garski"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "brazylijski(ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "bia³oruski"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "szwajcarski (uk³ad niemiecki)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "szwajcarski (uk³ad francuski)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "czeski (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "niemiecki ( bez martwych klawiszy)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "duñski"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvoraka (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvoraka (norweski)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "estoñski"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "gruziñski (uk³ad rosyjski)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "gruziñski (uk³ad ³aciñski)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "grecki"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "wêgierski"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "chorwacki"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "izraelski"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "izraelski (fonetyczny)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Irañski"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "islandzki"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "w³oski"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "japoñski 106 klawiszy"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "koreañski"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "latyno-amerykañski"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "litewski AZERTY"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "litewski AZERTY"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "litweski QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "litewski QWERTY - fonetyczny"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "Lokalizacja"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Macedoñska"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "holenderski"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "polski (programisty)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "polski (maszynistki)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "portugalski"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "kanadyjski (Quebec)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "rumuñski (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "rumuñski (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "rosyjski (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "s³oweñski"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "s³owacki (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "s³owacki (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "azerski (cyrilic)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "tajski"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "tajski"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "turecki"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "turecki (nowy)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "ukraiñski"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "amerykañski (miêdzynarodowy)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "wietnamski QWERTY"
-
-#: ../../keyboard.pm_.c:240
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "jugos³owiañski - (³aciñski/cyrylica)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Zapêtlone montowanie %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Zacznij od usuniêcia logicznych dysków (LV)\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Mysz Sun"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standardowa"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Mysz standardowa PS/2 z kó³kiem"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1-przyciskowa"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Standardowa"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "z kó³kiem"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "szeregowa"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Mysz standardowa 2-przyciskowa"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Mysz standardowa 3-przyciskowa"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech seria CC"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "Seria MM"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet (szeregowy)"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Mysz Logitech (szeregowa, stary typ C7)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2-przyciskowa"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3-przyciskowa"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "brak"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Brak myszy"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Przetestuj mysz"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "By uaktywniæ mysz,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "RUSZ KÓ£KIEM!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Zakoñcz"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Dalej ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Poprzedni"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Dzia³a prawid³owo?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Po³±czenie z Internetem"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Njabardziej typowym sposobem po³±czenia przez ADSL jest ppoe.\n"
-"Isteniej± jednak po³±czenia u¿ywaj±ce pptp oraz nieliczne - dhcp.\n"
-"Je¶li nie wiesz, wybierz \"u¿yj pppoe\""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "u¿yj dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "u¿yj pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "u¿yj pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Jaki program klienta DHCP chcesz u¿yæ?\n"
-"Domy¶lnym jest dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nie wykryto w systemie karty sieciowej.\n"
-"Nie mo¿na skonfigurowaæ tego typu po³±czenia."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Wybierz interfejs sieciowy"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Proszê wybraæ kartê sieciow± któr± chcesz u¿yæ do po³±czenia z Internetem"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nie znaleziono karty sieciowej"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Konfiguracja sieci"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Proszê wpisaæ nazwê komputera, je¶li j± znasz\n"
-"Niektóre z serwerów DHCP wymagaj± jej do dzia³ania.\n"
-"Nazwa ta powinna byæ w postaci pe³nej,\n"
-"np. \"mojkomputer.mojadomena.pl\"."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Nazwa komputera"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Kreator konfiguracji sieci"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Zewnêtrzny modem ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Wewnêtrzna karta ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Okre¶l rodzaj po³±czenia ISDN"
-
-#: ../../network/isdn.pm_.c:45
-#, fuzzy
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Jaki sposób konfiguracji ISDN preferujesz?\n"
-"\n"
-"* Stary sposób konfiguracji przy u¿yciu isdn4net. Wykorzystuje narzêdzia\n"
-"o du¿ych mo¿liwo¶ciach, lecz jest niestandardowy i podstêpny dla "
-"pocz±tkuj±cych\n"
-"\n"
-"* Nowy sposób konfiguracji jest ³atwiejszy do zrozumienia, bardziej "
-"standardowy,\n"
-"lecz daje mniej narzêdzi.\n"
-"\n"
-"Zalecany jest nowy sposób konfiguracji.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nowa konfiguracjia (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Stara konfiguracji (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "Konfiguracja ISDN"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Wybierz swojego dostawcê Internetu.\n"
-"Je¶li nie ma go na li¶cie, wybierz \"Unlisted\""
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protokó³ uruchamiania"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Reszta ¶wiata"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Reszta ¶wiata \n"
-" bez kana³u D (linie dzier¿awione)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Jakiego protoko³u chcesz u¿yæ?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Jaki rodzaj karty posiadasz?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Nie wiem"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Je¶li posiadasz kartê ISA, warto¶ci na nastêpnym ekranie\n"
-"powinny byæ odpowiednie\n"
-"Je¶li posiadasz kartê PCMCIA, powiniene¶ znaæ IRQ i IO swojej karty.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Przerwij"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Kontynuuj"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Wybierz swoj± kartê ISDN"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Wykryto kartê ISDN PCI nieznanego typu. Proszê wybraæ jedn± z listy na "
-"kolejnym ekranie."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nie wykryt± ¿adnej karty ISDN PCI. Proszê wybraæ jedn± z listy na kolejnym "
-"ekranie."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Wska¿ port szeregowy, do którego pod³±czony jest modem."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Opcje dzwonienia"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Nazwa po³±czenia"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Numer telefonu"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Identyfikator"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Oparta o skrypt"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Poprzez terminal"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Domena"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Pierwszy serwer DNS (opcjonalnie)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Drugi serwer DNS (opcjonalnie)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Mo¿esz roz³±czyæ siê lub zrekonfigurowaæ po³±czenie."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Mo¿esz zrekonfigurowaæ po³±czenie."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Jeste¶ ju¿ po³±czony z Internetem."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Mo¿esz po³±czyæ siê z Internetem lub zrekonfigurowaæ po³±czenie."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Nie jeste¶ teraz po³±czony z Internetem."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Po³±cz z Internetem"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Roz³±cz po³±czenie z Internetem"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Konfiguracja po³±czenia z sieci± (LAN lub Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Internet - po³aczenie i konfiguracja"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Bêdziemy teraz konfigrowaæ po³±czenie %s."
-
-#: ../../network/netconnect.pm_.c:105
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Bêdziemy teraz konfigurowaæ po³±czenie %s.\n"
-"\n"
-"\n"
-"By rozpocz±æ, naci¶nij Dalej."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Konfiguracja sieci"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Poniewa¿ przeprowadzasz instalacjê przez sieæ, jest ona ju¿ skonfigurowana.\n"
-"Wybierz OK by zachowaæ konfiguracjê, lub Anuluj by ponownie skonfigurowaæ "
-"sieæ/po³±czenie z Intenetem.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Witaj w Kreatorze Konfiguracji Sieci\n"
-"\n"
-"S³u¿y on do konfiguracji po³±czenia z Intenetem lub inn± sieci±.\n"
-"Je¶li nie chcesz korzystaæ z autodetekcji, odznacz to pole.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Wybierz profil do konfiguracji"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "U¿yj autodetekcji"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Wykrywanie urz±dzeñ..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Po³±czenie modemowe"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "wykryto na porcie %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "Po³±czenie ISDN"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "wykryto %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "Po³±czenie ADSL"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "wykryto na interfejsie %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Po³±czenie przez kablówkê"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "wykryto po³±czenie przez kablówkê"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "Sieæ lokalna"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "wykryto kartê(y) ethernet"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Wybierz po³±czenie, które chcesz skonfigurowaæ"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Skonfigurowano ró¿ne sposoby po³±czenia z Internetem.\n"
-"Wybierz ten, z którego chcesz korzystaæ.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Po³±czenie z Internetem"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Czy chcesz ³±czyæ siê Internetem przy uruchamianiu komputera?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Konfiguracja sieci"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Wyst±pi³ problem podczas restartowania sieci: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Gratulacje, konfiguracja sieci i Internetu zosta³a zakoñczona.\n"
-"\n"
-"Zostanie teraz zapisana w twoim systemie.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Po zakoñczeniu zalecane jest zrestartowanie X w celu ominiêcia\n"
-"problemu wynikaj±cego ze zmian± nazwy hosta."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"OSTRZE¯ENIE: Urz±dzenie to zosta³o poprzednio skonfigurowane do po³±czenia z "
-"Internetem.\n"
-"Naci¶nij po prostu OK by zachowaæ konfiguracjê.\n"
-"Modyfikacja pól poni¿ej spowoduje nadpisanie istniej±cej konfiguracji."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Proszê podaæ konfiguracjê IP dla komputera.\n"
-"Ka¿da pozycja powinna byæ wpisana w zapisie dziesiêtnym\n"
-"oddzielonym kropkami (np. 192.168.1.1)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfiguracja urz±dzenia sieciowego %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (sterownik %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "Adres IP"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Maska"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Automatyczne IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Adres IP powinien byæ w formacie typu 192.168.1.1"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Proszê wpisaæ nazwê komputera.\n"
-"Nazwa ta powinna byæ w postaci pe³nej,\n"
-"np. \"mojkomputer.mojadomena.pl\".\n"
-"Je¶li jest to potrzebne, nale¿y wpisaæ te¿ adres routera."
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "Serwer DNS"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Router"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Interfejs (np. eth0)"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Konfiguracja po¶rednika (proxy)"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "Po¶rednik HTTP"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "Po¶rednik FTP"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Nazwa po¶rednika powinna byæ typu: http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Nazwa po¶rednika powinna byæ typu: ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Internet - konfiguracja"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Czy chcesz teraz spróbowaæ po³±czyæ siê Internetem?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Testowanie po³±czenia..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Jeste¶ teraz po³±czony z Internetem."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Ze wzglêdu na bezpieczeñstowo po³±czenie zostanie teraz roz³±czone."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Po³±czenie z Internetem nie uda³o siê.\n"
-"Spróbuj zmieniæ konfiguracjê po³±czenia."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Konfiguracja po³±czenia"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Wype³nij lub zaznacz pole poni¿ej"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ karty"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "DMA karty"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "IO karty"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "IO_0 karty"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "IO_1 karty"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Numer Twojego telefonu"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Nazwa dostawcy us³ug (np. Dialog, Netia, TPSA)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Numer telefonu dostawcy us³ug"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "1 DNS dostawcy (opcjonalnie)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "2 DNS dostawcy (opcjonalnie)"
-
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "Wybór klawiatury"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Sposób wybierania"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Szybko¶æ po³±czenia"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Czas po³±czenia:"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Konto (nazwa u¿ytkownika)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Has³o:"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Na tej platformie nie istniej± partycje rozszerzone"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"W tablicy partycji jest puste miejsce pomiêdzy partycjami, którego\n"
-"nie mo¿na wykorzystaæ. Jedynym rozwi±zaniem jest przesuniêcie\n"
-"partycji podstawowych, by puste miejsce by³o obok partycji rozszerzonych"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Przywracanie z pliku %s nie powiod³o siê: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "B³±d zapisu do pliku %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Z Twoim dyskiem dzieje siê co¶ niedobrego. \n"
-"Nie powiód³ siê test spójno¶ci danych. \n"
-"Oznacza to, ¿e zapisanie czegokolwiek na dysku mo¿e siê ¼le skoñczyæ"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "musisz mieæ"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "wa¿ny"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "bardzo fajny"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "fajny"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "taki sobie"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Drukarka lokalna"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Drukarka sieciowa"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Zdalny serwer CUPS"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Sieciowy serwer lpd"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Drukarka sieciowa (socket)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Serwer wydruku"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Port drukarki URI:"
-
-#: ../../printer.pm_.c:48
-#, fuzzy
-msgid "Pipe job into a command"
-msgstr "Potok do polecenia"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modu³ %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Wybierz sposób pod³±czenia drukarki"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Jak jest pod³±czona drukarka?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"Korzystaj±c z sieciowego serwera CUPS nie musisz tutaj\n"
-"konfigurowaæ ¿adnych drukarek; zostan± one automatycznie\n"
-"wykryte, chyba ¿e znajduje siê on w innej sieci, w tym przypadku\n"
-"nale¿y podaæ adres serwera CUPS oraz opcjonalnie numer portu."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "¯aden"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Wybierz domy¶lnego u¿ytkownika:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Zamknij"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "Drukarka sieciowa"
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Adres IP powinien byæ w formacie typu 192.168.1.1"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Numer portu powinien byæ liczb±"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "Drukarka lokalna"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "IP serwera CUPS"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Konfiguracja sposobu uruchamiania"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Wykrywanie urz±dzeñ..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Testowanie portów"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Wykryto drukarkê model \"%s\" na"
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Port lokalnej drukarki"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Do jakiego portu jest pod³±czona drukarka?\n"
-"(pamiêtaj, ¿e /dev/lp0 to odpowiednik LPT1:)\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Port drukarki:"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "Brak nazwy urz±dzenia/pliku!"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Odczytywanie bazy sterowników CUPS..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Opcje drukarki sieciowej lpd"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"By u¿ywaæ kolejki drukarki sieciowej lpd nale¿y podaæ\n"
-"nazwê serwera wydruku oraz nazwê kolejki na\n"
-"serwerze, do której kierowane bêd± zadania wydruku."
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nazwa serwera:"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Drukarka sieciowa"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "Nazwa serwera: brak nazwy!"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nazwa serwera: brak nazwy!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcje drukarki SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"By drukowaæ na drukarce SMB, musisz okre¶liæ nazwê serwera SMB\n"
-"(nie zawsze jest ona równoznaczna z nazw± TCP/IP), o ile mo¿liwe\n"
-"adres IP serwera wydruku,nazwê u¿ytkownika, grupê, has³o oraz\n"
-"oczywi¶cie nazwê drukarki."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "Nazwa serwera SMB"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "IP serwera SMB"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Nazwa drukarki"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Grupa"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Nale¿y podac nazwê serwera lub jego adres IP!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "Brakuje nazwy udzia³u Samby!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "Opcje drukarki NetWare"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"By drukowaæ na drukarce NetWare, nale¿y podaæ nazwê serwera\n"
-"wydruku NetWare (nie zawsze to samo co nazwa TCP/IP!),\n"
-"nazwê kolejki drukarki, do której chcesz uzyskaæ dostêp,\n"
-"oraz w³a¶ciw± nazwê u¿ytkownika i has³o."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Serwer wydruku"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Nazwa kolejki drukarki"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "Brakuje nazwy serwera NCP!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "Brakuje nazwy kolejki NCP!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Opcje drukarki sieciowej"
-
-#: ../../printerdrake.pm_.c:528
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"By drukowaæ na drukarce sieciowej, nale¿y podaæ\n"
-"nazwê sieciow± drukarki oraz opcjonalnie numer portu."
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "Nazwa sieciowa drukarki"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "Brakuje nazy drukarki sieciowej!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Port drukarki URI:"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "A valid URI must be entered!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Ka¿da drukarka musi mieæ nazwê (na przyk³ad lp).\n"
-"Pola Opis i Lokalizacja nie musz± byc wype³niane.\n"
-"S± to komentarze dla u¿ytkowników."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Nazwa drukarki"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Opis"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Lokalizacja"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Odczytywanie bazy sterowników CUPS..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "Wybór modelu drukarki"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "Jaki model drukarki posiadasz?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Internet - konfiguracja"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Internet - konfiguracja"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, fuzzy, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Port musi byæ dodatni± liczb± ca³kowit±!"
-
-#: ../../printerdrake.pm_.c:1094
-#, fuzzy, c-format
-msgid "Option %s must be a number!"
-msgstr "Port musi byæ dodatni± liczb± ca³kowit±!"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Czy chcesz wydrukowaæ stronê testow±?"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "Testowanie portów"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "Drukarka"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standardowa"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Drukowanie stron/y testowych/ej"
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "Drukowanie stron/y testowych/ej"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Drukowanie stron/y testowych/ej"
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Strona testowa zosta³a wys³ana do demona drukowania.\n"
-"Mo¿e chwilê potrwaæ, zanim pojawi siê wydruk\n"
-"Status drukowania:\n"
-"%s\n"
-"\n"
-"Czy wydruk jest prawid³owy?"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Strona testowa zosta³a wys³ana do demona drukowania.\n"
-"Mo¿e chwilê potrwaæ, zanim pojawi siê wydruk\n"
-"Czy wydruk jest prawid³owy?"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Brak drukarki"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Zatrzymywanie sieci"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "Opcje drukarki"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Internet - konfiguracja"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Nazwa drukarki powinna zawieraæ tylko litery, cyfry i znak podkre¶lenia"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "Brak drukarki"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Odczytywanie bazy sterowników CUPS..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Konfiguracja Lilo/Grub"
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Otwieranie po³±czenia..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Konfiguracja sieci"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Nie skonfigurowano monitora"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Konfiguracja sieci"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Jakiego systemu wydruku zamierzasz u¿ywaæ?"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Wysoki"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoidalny"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Jakiego systemu wydruku zamierzasz u¿ywaæ?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Wybierz system wydruku"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Jakiego systemu wydruku zamierzasz u¿ywaæ?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfiguracja drukarki"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Opcje drukarki"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "Czy chcesz skonfigurowaæ drukowanie?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Tryb zwyk³y"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Domy¶lne)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Zdalny serwer CUPS"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "Zdalny serwer CUPS"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Dodaj drukarkê"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Chcesz przetestowaæ t± konfiguracjê?"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Internet - konfiguracja"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Po³±czenie z Internetem"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Wybór modelu drukarki"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "Drukowanie stron/y testowych/ej"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "Drukarka sieciowa"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Drukarka sieciowa"
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Chcesz zrestartowaæ sieæ?"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Drukarka sieciowa"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Konfiguracja po¶rednika (proxy)"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Narzêdzie do konfiguracji po¶rednika.\n"
-"\n"
-"Pozwala na skonfigurowanie po¶redników http oraz ftp\n"
-"z (lub bez) nazw± u¿ytkownika oraz has³em\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Proszê wprowadziæ dane po¶rednika http ,\n"
-"lub pozostawiæ puste, je¶li z niego nie korzystasz"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URL powinien zaczynaæ siê od: http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Numer portu powinien byæ liczb±"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Proszê wprowadziæ dane po¶rednika ftp ,\n"
-"lub pozostawiæ puste, je¶li z niego nie korzystasz"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL powinien zaczynaæ siê od: ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Proszê podaæ nazwê u¿ytkownika po¶rednika\n"
-"oraz has³o lub pozostawiæ pola puste"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "Nazwa u¿ytkownika"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "has³o"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "Powtórz has³o"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Has³a nie zgadzaj± siê. Spróbuj ponownie!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nie mo¿na dodaæ partycji do sformatowanego RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Nie mo¿na zapisaæ pliku %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid pad³"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid pad³ ( mo¿e brak raidtools)?"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Za ma³o partycji dla RAID poziom %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Uruchamia podsystem d¼wiêku ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron - program uruchamiaj±cy okresowo zadania."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Apmd przekazuje przez syslog informacje o stanie akumulatorów.\n"
-"Umo¿liwia tak¿e zamkniêcie systemu, gdy s± one zbyt wy³adowane."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Uruchamia o okre¶lonym czasie programy zaplanowane do wykonania komend± \"at"
-"\"\n"
-"oraz wykonuje zadania wsadowe, gdy obci±¿enie systemu jest niewielkie."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Cron jest standardowym programem unixowym, który zarz±dza wykonywaniem\n"
-"programów u¿ytkownika w okre¶lonych przez niego porach."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM umo¿liwia pos³ugiwanie siê mysz± w aplikacjach,\n"
-"pracuj±cych pod konsol± Linuxa jak np. Midnigth Commander.\n"
-"Umo¿liwia operacje Wytnij-Wklej oraz wybór opcji poprzez wyskakuj±ce menu."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake przeprowadza wykrywanie sprzêtu oraz opcjonalnie \n"
-"konfiguruje nowy lub zmieniony sprzêt."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache to serwer WWW. Jest u¿ywany do udostêpniania plików \n"
-"HTML i CGI w Internecie/Intranecie."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internetowy (super)demon, zwany inetd startuje wiele us³ug internetowych,\n"
-"takich jak telnet, ftp, rsh i rlogin.\n"
-" Wy³±czenie go uniemo¿liwia korzystanie z tych us³ug."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Uruchomienie filtrowania pakietów dla kernela Linuxa w wersji 2.2\n"
-"zabezpiecza komputer przed atakiem z sieci."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ten pakiet ³aduje wybrane mapowania klawiatury, zgodnie z zawarto¶ci±\n"
-"pliku /etc/sysconfig/keyboard. Mog± one byæ prze³±czane przy pomocy\n"
-"narzêdzia kbdconfig. Powinien byæ uruchomiony w wiêkszo¶ci przypadków."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatyczna regenracja nag³ówków kernela w /boot\n"
-"dla /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatyczne wykrywanie i konfiguracja sprzêtu przy uruchomieniu"
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"LinuxConf umo¿liwia przeprowadzenie podczas uruchamiania\n"
-"ró¿nych zadañ zwi±zanych z konserwacj± systemu."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Lpd to demon, konieczny do prawid³owego dzia³ania lpr,a przez to ca³ego \n"
-"systemu drukowania."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Wirtualny Serwer linuxowy u¿ywane jest przy tworzeniu bardzo wydajnych\n"
-"serwerów o du¿ej niezwodno¶ci."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"Named (BIND) to DNS -czyli serwer, umo¿liwiaj±cy t³umaczenie\n"
-"nazw komputerów na ich adresy IP."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Montuje i odmontowuje wszystkie punkty zamontowania systemów plików \n"
-"NFS ( sieciowe systemy plików), SMB {LAN Manager/Windows} i NCP ( NetWare)."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"W³±cza/wy³±cza skonfigurowane interfejsy sieciowe\n"
-"podczas uruchamiania systemu."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS jest popularnym protoko³em udostêpniania plików w sieci TCP/IP.\n"
-"Ta us³uga uruchamia konfigurowany przez plik /etc/exports serwer NFS."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS jest popularnym protoko³em udostêpniania plików w sieci TCP/IP.\n"
-"Ta us³uga umo¿liwia dzia³anie w NFS funkcji blokowania plików."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatycznie w³acza klawiaturê numeryczn± przy uruchamianiu \n"
-"w trybie konsoli oraz graficznym."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-"Zapewnia obs³ugê drukarek OKI dla Windows\n"
-"oraz kompatybilnych windrukarek."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA u¿ywany jest zwykle do obs³ugi kart ethernetowych i modemów\n"
-"w laptopach. Nie jest uruchamiany, je¿eli siê go nie skonfiguruje\n"
-"a wiêc bezpiecznie mo¿e byæ instalowany nawet na maszynach, które go nie \n"
-"potrzebuj±."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper zarz±dza po³±czeniami RPC, u¿ywanymi przez protoko³y takie, jak\n"
-"NFS i NIS. Je¿eli Twoja maszyna jest serwerem dla protoko³ów, które \n"
-"wykorzystuj± RPC, nale¿y go uruchomiæ na starcie."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix to agent pocztowy (MTA),\n"
-"przesy³aj±cy pocztê miêdzy maszynami."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr "Polepsza generacjê liczb pseudolosowych."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Przypisuje \"surowe\" urz±dzenia do urz±dzeñ blokowych\n"
-"(np dysków) dla aplikacji typu Oracle"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Demon routed aktualizuje automatycznie tablicê routingu IP wykorzystuj±c\n"
-"stosowany w ma³ych sieciach protokó³ RIP. W wiêkszych sieciach stosuje\n"
-"siê bardziej z³o¿one protoko³y routingu."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Protokó³ rstat umo¿liwia u¿ytkownikowi sieci monitorowanie \n"
-"wydajno¶ci innych maszyn w sieci."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Protokó³ rusers pozwala na sprawdzanie, kto jest zalogowany na innych,\n"
-"dostêpnych maszynach w sieci."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Protokó³ rwho dzia³a jak who ( podaje listê u¿ytkowników) dla innych maszyn "
-"w sieci.\n"
-"które maj± w³±czony demon rwho (podobny do finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Uruchamia podsystem d¼wiêku w komputerze"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog to narzêdzie, pozwalaj±ce ró¿nym demonom na\n"
-"dokonywanie wpisów do ró¿nych plików \"dziennikowych\" ( log files).\n"
-"Jego uruchomienie jest zalecane."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "£aduje sterowniki urz±dzeñ USB."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Uruchamia serwer czcionek (konieczny do dzia³ania XFree)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Wybierz us³ugi automatycznie uruchamiane podczas startu"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "Drukarka"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "Tryb pracy systemu"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Opcje drukarki sieciowej lpd"
-
-# ../../share/compssUsers
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Bazy danych"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "urz±dzenie"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "uruchomione"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "zatrzymane"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Us³ugi i demony"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Niestety brak dodatkowych informacji\n"
-"o tej us³udze."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Przy uruchamianiu"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instalowanie pakietu %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Nie mo¿na odczytaæ tablicy partycji, jest zbyt uszkodzona :(\n"
-"Mo¿na próbowaæ kontynuowaæ z pustymi partycjami"
-
-#: ../../standalone/drakautoinst_.c:44
-#, fuzzy
-msgid "Error!"
-msgstr "B³±d"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Konfiguracja poinstalacyjna"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Konfiguracja sposobu uruchamiania"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Gratulacje!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Wspó³dzielenie po³±czenia z Internetem"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Wspó³dzielenie po³±czenia z Internetem jest w³±czone"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Konfiguracja wspó³dzielenia po³±czenia z Internetem zosta³a ju¿ wykonana.\n"
-"Jest teraz uaktywniona.\n"
-"\n"
-"Co chcesz zrobiæ?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "wy³±czyæ"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "zwolniæ"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "rekonfigurowaæ"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Wy³±czenie serwerów..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Wspó³dzielenie po³±czenia z Internetem jest wy³±czone."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Wspó³dzielenie po³±czenia z Internetem jest wy³±czone"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Konfiguracja wspó³dzielenia po³±czenia z Internetem zosta³a ju¿ wykonana.\n"
-"Us³uga ta jest teraz wy³±czona.\n"
-"\n"
-"Co chcesz zrobiæ?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "w³±czyæ"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "W³±czenie serwerów..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Wspó³dzielenie po³±czenia z Internetem jest teraz w³±czone"
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Mo¿na skonfigurowaæ komputer jako wspó³dziel±cy po³±czenie z Internetem\n"
-"Ta us³uga pozwala innym komputerom w sieci lokalnej na u¿ywanie po³±czenia\n"
-"tego komputera z Internetem.\n"
-"\n"
-"Uwaga:  wymagana jest dedykowana karta sieciowa w³±czaj±ca komputer w sieæ "
-"lokaln± (LAN)"
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfejs %s (modu³ %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Interfejs %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Nie wykryto w systemie karty sieciowej!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nie wykryto w systemie karty sieciowej. Proszê uruchomiæ program "
-"konfiguracji sprzêtu."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Interfejs sieciowy"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"W Twoim systemie istnieje tylko jedna skonfigurowana karta sieciowa:\n"
-"\n"
-"%s\n"
-"\n"
-"Mo¿na skonfigurowaæ sieæ lokaln± (LAN) przy wykorzystaniu tej karty."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Wska¿, która karta sieciowa bêdzie po³±czona\n"
-"z sieci± lokaln± (LAN)."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Uwaga, karta sieciowa zosta³a ju¿ skonfigurowana. Zostanie zrekonfigurowana."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"W bie¿±cej konfiguracji wykryto mo¿liwy konflikt adresów sieciowych: %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Wykryto konfiguracjê firewalla!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Ostrze¿enie! Zosta³a wykryta istniej±ca konfiguracja firewalla. Mo¿e byæ "
-"konieczne dokonanie kilku rêcznych poprawek po instalacji. Kontynuowaæ?"
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Konfiguracja..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Konfiguracja skryptów, instalowanie programów, uruchamianie serwerów..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemy z instalacj± pakietu %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Wszytko zosta³o skonfigurowane.\n"
-"Mo¿esz udostêpniaæ po³±czenie z Internetem innym komputeremw sieci lokalnej, "
-"u¿ywaj±c automatycznej konfiguracji sieci (DHCP)"
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Konfiguracja wspó³dzielenia po³±czenia  zosta³a ju¿ wykonana, lecz us³uga ta "
-"jest teraz wy³±czona."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"Konfiguracja wspó³dzielenia po³±czenia z Internetem zosta³a ju¿ wykonana "
-"jest w³±czona"
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Wspó³dzielenie po³±czenia z Internetem nie by³o jeszcze konfigurowane."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Konfiguracja wspó³dzielenia po³±czenia z Internetem"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Witaj w konfiguratorze wspó³dzielenia po³±czenia z Internetem!\n"
-"\n"
-"%s\n"
-"\n"
-"Wybierz Konfiguruj, by uruchomiæ kreatora.."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Konfiguracja sieci (%d karty)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Usuñ profil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Profil do usuniêcia:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Nowy profil..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Nazwa komputera:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Dostêp do Internetu"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Rodzaj: "
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Router:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Interfejs:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Po³±czony"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Nie po³±czony"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Po³±cz..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Roz³±cz..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Otwieranie po³±czenia..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Zamykanie po³±czenia..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Po³±czenie nie zosta³o zamkniête.\n"
-"Spróbuj zrobiæ to rêcznie przez uruchomienie\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"jako root."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "System jest teraz roz³±czony."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Konfiguracja dostêpu do Internetu..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "Konfiguracja sieci lokalnej"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Sterownik"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Interfejs"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protokó³"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "State"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Konfiguracja sieci lokalnej..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Zastosuj"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Proszê czekaæ... ³adowanie konfiguracji"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nie skonfigurowano jeszcze ¿adnego interfejsu.\n"
-"Zacznij konfiguracjê przez klikniêcie na \"Konfiguruj\""
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "Konfiguracja sieci lokalnej"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Karta %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Protokó³ uruchamiania"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Uruchamiany przy starcie"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "Klient DHCP"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "activate now"
-msgstr "Uaktywnij"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "desactivate now"
-msgstr "Uaktywnij"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nie skonfigurowano jeszcze ¿adnego po³±czenia z Internetem.\n"
-"Rozpocznij konfiguracjê przez klikniêcie na \"Konfiguruj\""
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Konfiguracja po³±czenia z Internetem"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Konfiguracja po³±czenia z Internetem"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Rodzaj po³±czenia:"
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parametry"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Karta ethernet"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "Klient DHCP"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Witajcie, w³amywacze"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Z³y"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoidalny"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ten poziom powinien byæ u¿ywany ostro¿nie. Co prawda system jest ³atwiejszy\n"
-"do u¿ywania, ale jest te¿ bardziej wra¿liwy i mniej bezpieczny, szczególnie "
-"dla \n"
-"maszyn pracuj±cych  w Internecie. Nie ma zabezpieczenia has³em!"
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Has³a s± uaktywnione, ale ci±gle nie zalecamy u¿ywania komputera\n"
-"w sieci."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Parê ulepszeñ dla tego poziomu zabezpieczeñ: wiêcej komunikatów i testów."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"To jest standardowy poziom zabezpieczeñ dla komputera, który bêdzie\n"
-"korzysta³ z sieci jako klient."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Ten poziom umo¿liwia u¿ycie komputera jako serwera, który akceptuje\n"
-"po³±czenia z wieloma klientami przy zachowaniu wysokiego \n"
-"poziomu bezpieczeñstwa."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"To czwarty poziom zabezpieczeñ.\n"
-"System jest ca³kowicie zamkniêty, poziom zabezpieczeñ jest maksymalny."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "Ustawienie poziomu bezpieczeñstwa"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Wybierz opcje serwera"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Ustawienie poziomu bezpieczeñstwa"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centrum Sterowania"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Wybór u¿ywanych narzêdzi"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "u¿ycie: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Czy chcesz u¿ywaæ BackSpace zamiast Delete dla konsoli?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Zmiana CD-ROM"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"W³ó¿ p³ytê Installation CD-Rom do kieszeni czytnika i naci¶nij Ok.\n"
-"Je¶li jej nie masz, naci¶nij Anuluj, by omin±æ uaktualnienie."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Nie mo¿na uruchomiæ uaktualnienia!!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "nie znaleziono serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Emulowaæ ¶rodkowy przycisk?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Konfiguracja zapory sieciowej"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Konfiguracja zapory sieciowej"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Zapora sieciowe\n"
-"\n"
-"Jest ju¿ skonfigurowana.\n"
-"Wybierz Konfiguruj, by zmieniæ lub usun±c jego konfiguracjê"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Zapora sieciowa\n"
-"\n"
-"Wybierz Konfiguruj, by ustawiæ standardow± zaporê sieciow±"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Wybór jêzyka"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Rodzaj instalacji"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Wykrywanie dysków"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfiguracja myszy"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Wybór klawiatury"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Bezpieczeñstwo"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Systemy plików"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatowanie"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Wybór pakietów"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalacja pakietów"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "U¿ytkownicy"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfiguracja sieci"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfiguracja us³ug"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Dysk startowy"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Program rozruchowy"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfiguracja X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Wyj¶cie z instalacji"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Konfiguracja zapory sieciowej\n"
-"\n"
-"Narzêdzie to umo¿liwia konfguracjê prostej zapory sieciowej.\n"
-"Je¶li potrzebujesz silnego dedykowanego rozwi±zania,\n"
-"skorzystaj z dystrybucji Mandrake Security Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Zostanie zadane kilka pytañ dotycz±cych us³ug, które chcesz\n"
-"udostêpniaæ w Internecie. Przemy¶l odpowiedzi na te pytania,\n"
-"poniewa¿ bezpieczeñstwo komputera w sieci jest wa¿ne.\n"
-"\n"
-"Pamiêtaj, wy³±cz us³ugi, z których teraz nie korzystasz.\n"
-"Mo¿esz w dowolnej chwili zmieniæ konfiguracjê powtórnie\n"
-"uruchomiaj±c ten program!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Czy uruchamiono na tym komputerze serwer WWW, który ma byæ dostêpny\n"
-"z Internetu?. Je¶li uruchomiono serwer, który ma byæ dostêpny tylko z tego\n"
-"komputera, mo¿esz spokojnie odpowiedzieæ tutaj NIE.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Czy uruchomiono serwer nazw (DNS)?\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Czy chcesz umo¿liwiæ nawi±zywanie przychodz±cych po³±czeñ ssh?\n"
-"Ssh to nastêpca telneta u¿ywany do logowania. Je¶li u¿ywasz jeszcze "
-"telneta,\n"
-"nale¿y ostatecznie przej¶æ na ssh, poniewa¿ telnet nie jest szyfrowany,\n"
-"co daje mo¿liwo¶æ pods³uchania has³a i w³amania siê do systemu."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Czy chcesz umo¿liwiæ nawi±zywanie przychodz±cych po³±czeñ telnet?\n"
-"Jest to bardzo niebezpieczne, sugerujemy by odpowiedzieæ NIE\n"
-"i u¿ywaæ zamiast telneta ssh.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Czy uruchomiono dostêpny z Internetu serwer FTP?. Je¶li tak, zalecamy\n"
-"u¿ywanie go tylko do anonimowych transferów, poniewa¿ FTP tak¿e nie\n"
-"szyfruje przesy³anych hase³.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Czy uruchomiono serwer pocztowy?. Je¶li wysy³asz pocztê\n"
-"korzystaj±c z tekstowych programów typu pine czy mutt\n"
-"serwer pocztowy prawdopodobnie jest uruchomiony.\n"
-"Je¶li nie, nale¿y zablokowaæ t± us³ugê.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Czy uruchomiono serwer POP lub IMAP? U¿ywany jest on do zdalengo\n"
-"odbioru poczty z kont pocztowych za³o¿onych na tym komputerze\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Wygl±da na to, ¿e uruchomiony jest kernel serii 2.2. \n"
-"Je¶li Twój adres IP jest przyznawany automatycznie,\n"
-"przez inny komputer w biurze lub domu nale¿y na to\n"
-"pozwoliæ. Jak jest w tym przypadku?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Czy Twój komputer synchronizuje czas z innego komputera?\n"
-"Najczê¶ciej jest to wykorzystywane w du¿ych i ¶rednich\n"
-"organizacjach do synchronizacji czasu dla logowania.\n"
-"Je¶li nie s³ysza³e¶ o tym, prawdopodobnie nie potrzebujesz\n"
-"tej us³ugi."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Zakoñczono konfiguracjê. czy zapisaæ zamiany na dysk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Nie mo¿na otworzyæ %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "B³±d otwarcia %s do zapisu: %s\n"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "WWW,/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Komputer sieciowy (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Serwery NFS, SMB, SSH, oraz Proxy"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Biuro"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Stacja robocza z Gnome"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Narzêdzia do Palm Pilota lub Visior"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Stacja robocza"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Zapora sieciowa/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Serwer systemu DNS"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programy biurowe: procesory tekstu (kword, abiword), arkusze kalkulacyjne "
-"(kspread, gnumeric), przegl±darki pdf, itp."
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Dzwiêk: odtwarzacze mp3 i midi, miksery, itp."
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Podrêczniki i HOWTO o Linuksie i wolnym oprogramowaniu"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Stacja robocza z KDE"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itp"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Zestawy narzêdzi dla poczty, WWW, transferu plików i chat"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Bazy danych"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Serwery baz danych PostgreSQL lub  MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Narzêdzia u³atwiaj±ce konfiguracjê komputera"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - D¼wiêk"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Narzêdzia"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentacja"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Narzêdzia dla konsoli"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Serwer pocztowy Postfix, serwer grup dyskusyjnych Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Korzystanie z Internetu"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Korzystanie z multimediów"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Konfiguracja sieci lokalnej"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Wiêcej pulpitów graficznych (Gnome, IceWM)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"KDE - podstawowe ¶rodowisko graficzne wraz z zestawem towarzysz±cych narzêdzi"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "¦rodowisko graficzne"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Programowanie"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache oraz Pro-ftpd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Narzêdzia do tworzenia i nagrywania CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Komputer biurowy"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, itp."
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programy graficzne, np. Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Biblioteki do programowania w C i C++ , programy i pliki nag³ówkowe"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Serwer sieciowy"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Pocza/Narzêdzia pracy grupowej/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Komputer do gier"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Odtwarzacze i edytory video"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafika"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programy rozrywkowe: zrêczno¶ciowe, planszowe, strategiczne, itp."
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Zestaw narzêdzi do czytania i wysy³ania poczty i grup dyskusyjnych (pin, "
-"mutt, tin) oraz przegl±dania sieci Web"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archiwizacja, emulatory, monitorowanie"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanse osobiste"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"¦rodowisko graficzne z przyjaznymi dla u¿ytkownika zestawami aplikacji i "
-"narzêdzi"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Programy klientów dla ró¿nych protoko³ów, w tym ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Bramka do Internetu"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programy do odtwarzania/edycji d¼wiêku i video"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Inne pulpity graficzne"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "editory, pow³oki, narzêdzia plikowe, terminale"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programy do zarz±dzania finansami, np gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Gry"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Zarz±dzanie osobistymi informacjami"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - Nagrywanie p³yt CD"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Stacja robocza dla naukowca"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "nie mo¿na otworzyæ do odczytu /etc/sysconfig/autologin: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Chcesz zrestartowaæ sieæ?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Zgadzasz siê?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Nale¿y zrestartowaæ interfejs:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Nale¿y zrestartowaæ urz±dzenie %s. Zgadzasz siê?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Standardowy wybór to \"/dev/hda\", czyli pierwszy  dysk twardy (primary\n"
-#~ " IDE) lub  \"/dev/sda\" pierwszy dysk SCSI (first SCSI disk)."
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Istniej± nastêpuj±ce kolejki wydruku.\n"
-#~ "Mo¿esz dodaæ nastêpne lub zmieniæ istniej±ce."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Czas po³±czenia:"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Wybierz domy¶lnego u¿ytkownika:"
-
-#~ msgid "Spooler: "
-#~ msgstr "System wydruku: "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Sprawd¼ tutaj mysz"
-
-#~ msgid "Press next to continue."
-#~ msgstr "By kontynuowaæ, naci¶nij Dalej."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Wybierz w³a¶ciwy jêzyk instalacji i u¿ywania systemu."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "By kontynuowaæ instalacjê, musisz zaakceptowaæ warunki licencji.\n"
-#~ "\n"
-#~ "\n"
-#~ "Wybierz \"Zgadzam siê\", je¶li zgadzasz siê z jej warunkami.\n"
-#~ "\n"
-#~ "\n"
-#~ "Wybierz \"Nie zgadzam siê\", je¶li siê z nimi nie zgadzasz.\n"
-#~ "Instalacja zostanie zakoñczona bez ¿adnych zmian w konfiguracji."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Wybierz odpowiedni jêzyk i uk³ad klawiatury z listy powy¿ej"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Je¶li chcesz, by po instalacji by³y dostêpne tak¿e inne jêzyki\n"
-#~ "(poza wybranym na pocz±tku instalacji), wybierz je z listy powy¿ej\n"
-#~ "Je¶li chcesz wybraæ wszystkie, wska¿ \"Wszystkie\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Wybierz:\n"
-#~ "\n"
-#~ "\n"
-#~ "  - U¿ytkownika: Je¶li jeste¶ obeznany z Linuxem, masz mo¿liwo¶æ\n"
-#~ "     okre¶lenia zastosowania zainstalowanego systemu. Szczegó³y poni¿ej\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ekspert: ¦wietnie znasz  GNU/Linux i chcesz zainstalowaæ go\n"
-#~ "    w nietypowy, odpowiedni dla Ciebie sposób . Podobnie jak w przypadku\n"
-#~ "    instalacji \"U¿ytkownika\" masz mo¿liwo¶æ okre¶lenia zastosowania "
-#~ "systemu\n"
-#~ "    Ale bardzo, bardzo prosimy, NIE WYBIERAJ TEJ OPCJI, JE¦LI NIE WIESZ "
-#~ "CO ROBISZ!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Teraz nale¿y okre¶liæ sposób wykorzystania komputera. \n"
-#~ "* Stacja robocza: To dokona³y wybór, je¶li u¿ywasz komputera do "
-#~ "codziennej pracy w biurze lub\n"
-#~ "  w domu.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Programowanie: wybierz tê opcjê, je¿eli chcesz korzystaæ z komputera do "
-#~ "tworzenia oprogramowania.\n"
-#~ "  Zostanie zainstalowane ca³e oprogramowanie umo¿liwiaj±ce kompilacjê , "
-#~ "debugowanie programów,\n"
-#~ "  oraz tworzenie pakietów oprogramowania.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Serwer: jest to w³a¶ciwy wybór, je¶li komputer ma byc serwerem. Mo¿e to "
-#~ "byæ serwer plików (NFS lub\n"
-#~ "  SMB ), serwer drukarek (uniksowy typu \"windowsowego\") serwer NIS, "
-#~ "serwer baz danych itp.\n"
-#~ "  Nie oczekuj zainstalowaniea ¿adnych wodotrysków typu KDE lub GNOME."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Mo¿esz teraz wybraæ grupy pakietów, które chcesz \n"
-#~ "zainstalowaæ lub aktualizowaæ\n"
-#~ "\n"
-#~ "\n"
-#~ "Instalator sprawdzi, czy masz na to do¶æ miejsca na dysku. Zostaniesz\n"
-#~ "ostrze¿ony, je¶li jest go zbyt ma³o. Je¶li postanowisz mimo to "
-#~ "kontynuowaæ,\n"
-#~ "czê¶æ mniej wa¿nych pakietów nie zostanie zainstalowana.\n"
-#~ "Na dole listy znajdziesz opcjê \"Samodzielny wybór pakietów\"; \n"
-#~ "Bêdziesz musia³ jednak wybieraæ spo¶ród ponad1000 pakietów ..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Mo¿na teraz indywidualnie wybieraæ pakiety do zainstalowania.\n"
-#~ "\n"
-#~ "\n"
-#~ "Klikniêcie w lewym rogu okna pakietów zwija lub rozwija listê pakietów\n"
-#~ "\n"
-#~ "\n"
-#~ "Klikniêcie na \"Prze³±cz miêdzy p³askim i grupowym sortowaniem\"\n"
-#~ "umo¿liwia zobaczenie pakietów posortowanych alfabetycznie\n"
-#~ "\n"
-#~ "\n"
-#~ "Je¶³i nie chcesz byæ informowany o zale¿no¶ciach miedzy pakietami,\n"
-#~ "kliknij na \"Automatyczne sprawdzanie zale¿no¶ci\". Po w³±czeniu tej "
-#~ "opcji\n"
-#~ "odznaczenie pakietu spowoduje automatyczne od innych pakietów,\n"
-#~ "które wymagaj± go do dzia³ania."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Je¶li masz wszystkie instalacyjne p³yty CD z listy powy¿ej, kliknij Ok.\n"
-#~ "Je¶li nie masz ¿adnej z tych p³yt, kliknij Anuluj.\n"
-#~ "Je¶li masz niektóre z p³yt, odznacz te, których nie masz i kliknij Ok."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "Nale¿y teraz przetestowaæ dzia³anie myszy. U¿yj przycisków oraz kó³ka\n"
-#~ "by sprawdziæ, czy ustawienia s± prawid³owe. Je¶li nie, naci¶nij \"Anuluj"
-#~ "\"\n"
-#~ "i wybierz inny sterownik.\n"
-#~ "\n"
-#~ "\n"
-#~ "Je¶li instalujesz na komputerze Apple z 1-przyciskow± mysz±, masz teraz\n"
-#~ "mo¿liwo¶æ przypisania jaki¶ klawiszy klawiatury w celu emulacji 2 i 3 "
-#~ "przycisku\n"
-#~ "myszy. Pozwoli to na zapewnienie pe³nej funkcjonalno¶ci myszy podczas "
-#~ "pracy\n"
-#~ "na konsoli oraz w ¶rodowisku graficznym. "
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Wybierz w³a¶ciw± opcjê, by pod³±czyæ komputer do Internetu\n"
-#~ "lub sieci lokalnej. Pamiêtaj o w³±czeniu urz±dzeñ zewnêtrznych\n"
-#~ "przed wybraniem opcji, by instalator móg³ je automatycznie wykryæ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Je¶li nie u¿ywasz sieci lokalnej ani Internetu, wybierz\n"
-#~ "\"Wy³±czenie sieci\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Je¶li chcesz skonfigurowaæ sieæ po instalacji, lub zakoñczy³e¶\n"
-#~ "konfigurowanie sieci, wybierz \"Zrobione\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Nie wykryto modemu. Proszê okre¶liæ port szeregowy, do którego jest on "
-#~ "pod³±czony.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dla informacji: pierwszy port szeregowy (COM1 w Windows)\n"
-#~ "w GNU/Linux nazywa siê \"ttyS0\". "
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Nale¿y teraz podaæ opcje po³±czenia modemowego. Je¶li nie wiesz,\n"
-#~ "lub nie wiesz co wpisaæ, poprawne informacje otrzymasz od\n"
-#~ "Twojego dostawcy Internetu (ISP). Je¶li nie wpiszesz adresów DNS, zostan± "
-#~ "one pobrane od ISP\n"
-#~ "w trakcie po³±czenia."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Je¶li posiadasz zewnêtrzny modem, w³±cz go, by instalator móg³ go "
-#~ "automatycznie wykryæ."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "W³±cz modem i wybierz w³asciwy model."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Je¶li nie jeste¶ pewien, ¿e powy¿sze informacje s± prawid³owe, lub\n"
-#~ "lub nie wiesz co wpisaæ, poprawne informacje otrzymasz od\n"
-#~ "Twojego dostawcy Internetu (ISP). Je¶li nie wpiszesz adresów DNS, zostan± "
-#~ "one pobrane od ISP\n"
-#~ "w trakcie po³±czenia."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Mo¿esz teraz, podaæ nazwê hosta (je¶li trzeba).\n"
-#~ "Je¶li nie jeste¶ pewien, co wpisaæ, nale¿y uzyskaæ informacje od\n"
-#~ "Twojego dostawcy Internetu (ISP)."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Nale¿y teraz skonfigurowaæ kartê sieciow±\n"
-#~ "\n"
-#~ "   * adres IP, je¿eli go nie znasz, spytaj administratora sieci\n"
-#~ "     Nie wpisuj adresu IP, je¶li wybra³e¶ \"Automatyczne IP\".\n"
-#~ "\n"
-#~ "   * maskê sieci, \"255.255.255.0\" na ogó³ dzia³a. \n"
-#~ "      Je¿eli  nie jeste¶ pewien, spytaj administratora sieci.\n"
-#~ "\n"
-#~ "    * Automatyczne IP: Je¿eli Twoja sieæ u¿ywa protoko³u DHCP lub BOOTP,\n"
-#~ "      wybierz tê opcjê. Je¿eli nie jeste¶ pewien, spytaj administratora "
-#~ "sieci.\n"
-#~ "      W przypadku wybranie tej opcji nie nale¿y wpisywaæ adresu IP"
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Mo¿esz teraz, podaæ nazwê hosta (je¶li trzeba).\n"
-#~ "Je¶li nie jeste¶ pewien, co wpisaæ, nale¿y uzyskaæ informacje od "
-#~ "administratora sieci."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Mo¿esz teraz, podaæ nazwê hosta (je¶li trzeba).\n"
-#~ "Je¶li nie jeste¶ pewien, co wpisaæ, pozostaw to pole puste."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Mo¿esz teraz podaæ opcje po³±czenia modemowego. Je¿eli ich nie znasz, \n"
-#~ "skontaktuj siê z dostawc± Internetu (ISP)."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Je¶li bêdziesz korzysta³ z serwerów po¶rednicz±cych, skonfiguruj je "
-#~ "teraz.\n"
-#~ "Je¿eli nie jeste¶ pewien, spytaj administratora sieci lub dostawcy "
-#~ "Internetu."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Mo¿esz u¿yæ pakietów kryptograficznych, je¿eli Twoje po³±czenie \n"
-#~ "z Internetem zosta³o odpowiednio skonfigurowane. Zacznij od wyboru "
-#~ "mirrora\n"
-#~ "(miejsca, sk±d bêdziesz ¶ci±ga³ pakiety) i wybierz pakiety do instalacji\n"
-#~ "\n"
-#~ "\n"
-#~ "Pamiêtaj, ¿e wybór mirrora i pakietów musi byæ zgodny z polskim prawem."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Nale¿y teraz okre¶liæ strefê czasow± miejsca, w którym mieszkasz."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Mo¿esz skonfigurowaæ drukarkê lokaln± (pod³±czonê bezpo¶rednio do\n"
-#~ "Twojego komputera), lub sieciow± (dostêpn± poprzez sieæ Unix, Netware\n"
-#~ "lub Microsoft Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Je¶li chcesz mieæ mo¿liwo¶æ drukowania, wybierz system wydruku\n"
-#~ "(dostêpne s± CUPS i LPR)\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS to nowy, silny i elastyczny system wydruku dla systemów Unixowych\n"
-#~ "(CUPS oznacza \"Common Unix Printing System\"). Jest to domy¶lny system\n"
-#~ "wydruku w Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR to stary system wydruku u¿ywany w poprzednich\n"
-#~ "wersjach Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "Je¶li nie u¿ywasz drukarki, wybierz \"Brak\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux obs³uguje wiele rodzajów drukarek. Ka¿da z nich wymaga\n"
-#~ "oddzielnej konfiguracji.\n"
-#~ "\n"
-#~ "\n"
-#~ "Je¶li drukarka jest fizycznie pod³±czona do Twojego komputera, wybierz\n"
-#~ "\"Drukarka lokalna\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Je¶li chcesz uzyskaæ dostêp do drukarki na innym komputerze z Unixem,\n"
-#~ "wybierz \"Drukarka sieciowa\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Je¶li chcesz uzyskaæ dostêp do drukarki za³o¿onej na innym komputerze\n"
-#~ "z Microsoft Windows (lub Unixie z Samb±), wybierz \"SMB/Windows 95/98/NT"
-#~ "\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Nale¿y teraz w³±czyæ drukarkê, by umo¿liwiæ instalatorowi jej wykrycie.\n"
-#~ "\n"
-#~ "Konieczne jest te¿ podanie kilku informacji.\n"
-#~ "\n"
-#~ "\n"
-#~ "...*.Nazwa drukarki: system wydruku wykorzystuje  \"lp\" jako domy¶ln± "
-#~ "drukarkê, powiniene¶ posiadaæ drukarkê\n"
-#~ "     o takiej nazwie. Jedna drukarka mo¿e mieæ wiele nazw, oddzielonych "
-#~ "znakiem '\"'\".\n"
-#~ "     Je¶li wiêc lubisz przyjazne nazwy, mo¿esz z nich korzystaæ:np. "
-#~ "\"Moja drukarka|lp\".\n"
-#~ "    Drukarka, której jedn± z nazw jest \"lp\" bêdzie drukark± domy¶ln±\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Opis drukarki jest opcjonalny, lecz u¿yteczny je¶li posiadasz wiêcej "
-#~ "drukarek, lub te¿ udostêpniasz je innym\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Lokalizacja. Je¶li chcesz podaæ informacje o po³o¿eniu drukarki,\n"
-#~ "     wpisz je tutaj (mo¿esz wpisaæ cokolwiek, np. \"Drugie piêtro\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Nale¿y wpisaæ tutaj kilka informacji.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nazwa kolejki: system wydruku wykorzystuje  \"lp\" jako domy¶ln± "
-#~ "drukarkê, powiniene¶ posiadaæ drukarkê\n"
-#~ "     o takiej nazwie. Jedna drukarka mo¿e mieæ wiele nazw, oddzielonych "
-#~ "znakiem '\"'\".\n"
-#~ "     Je¶li wiêc lubisz przyjazne nazwy, mo¿esz z nich korzystaæ:np. "
-#~ "\"Moja drukarka|lp\".\n"
-#~ "    Drukarka, której jedn± z nazw jest \"lp\" bêdzie drukarka domy¶ln±\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Katalog bufora: jest to katalog, gdzie s± zapisywane drukowane "
-#~ "zadania. Nie zmieniaj domy¶lnego wpisu,\n"
-#~ "     je¶li nie wiesz, co wpisaæ\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Pod³±czenie drukarki. Je¶li drukarka jest fizycznie pod³±czona do "
-#~ "Twojego komputera, wybierz\n"
-#~ "     \"Drukarka lokalna\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Je¶li chcesz uzyskaæ dostêp do drukarki na innym komputerze z "
-#~ "Unixem,\n"
-#~ "     wybierz \"Drukarka sieciowa lpd\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Je¶li chcesz uzyskaæ dostêp do drukarki za³o¿onej na innym "
-#~ "komputerze z Microsoft Windows\n"
-#~ "      (lub Unixie z Samb±), wybierz \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "     Je¶li chcesz uzyskaæ dostêp do drukarki w sieci Netware, wybierz "
-#~ "\"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Nie wykryto drukarki. Podaj nazwê portu, do którego jest pod³±czona\n"
-#~ "\n"
-#~ "\n"
-#~ "Dla informacji: wiêkszo¶æ drukarek pod³±cza siê do pierwszego portu "
-#~ "równoleg³ego\n"
-#~ "Nazywa siê on w GNU/Linuksie \"/dev/lp0\", natomiast w Windows\"LPT1\""
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Wybierz drukarkê z listy powy¿ej."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Wybierz w³a¶ciwe dla swojej drukarki opcje.\n"
-#~ "Je¶li nie wiesz, co zaznaczyæ, zapoznaj siê z dokumentacj± drukarki\n"
-#~ "\n"
-#~ "\n"
-#~ "W nastêpnym kroku bêdzie mo¿liwe sprawdzenie wybranej konfiguracji oraz "
-#~ "jej modyfikacja, je¶li wydruki nie bêd± zgodne z oczekiwaniami."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Teraz nale¿y wpisaæ has³o roota Twojego Mandrake Linux.\n"
-#~ "Has³o nale¿y wpisaæ dwa razy w celu weryfikacji poprawno¶ci\n"
-#~ "\n"
-#~ "\n"
-#~ "Root to administrator systemu, jedyny u¿ytkownik maj±cy prawo\n"
-#~ "modyfikacji konfiguracji systemu.Zwróæ wiêc szczególn± uwagê na\n"
-#~ "jego has³o! Nieautoryzowane u¿ycie konta roota mo¿e byæ skrajnie\n"
-#~ "niebezpieczne dla integralno¶ci systemu i danych oraz innych systemów,\n"
-#~ "pod³±czonych do niego.\n"
-#~ "\n"
-#~ "\n"
-#~ "Has³o powinno byæ mieszank± znaków alfanumerycznych\n"
-#~ "o d³ugo¶ci co najmniej 8 znaków. *Nigdy* nie powinno byæ\n"
-#~ "zapisywane.\n"
-#~ "\n"
-#~ "Nie wymy¶laj jednak has³a zbyt d³ugiego lub nazbyt\n"
-#~ "skomplikowanego: musisz go zapamiêtaæ bez k³opotu."
-
-#~ msgid ""
-#~ "If your network uses LDAP (or NIS) protocol for authentication, select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "Je¶li w sieci do autentykacji stosowany jest protokó³ LDAP (lub NIS), "
-#~ "wybierz\n"
-#~ "\"LDAP\" (lub \"NIS\") jako sposób autentykacji. Je¶li nie wiesz, spytaj\n"
-#~ "administratora sieci\n"
-#~ "\n"
-#~ "Jesli komputer nie jset pod³±czony do administrowanej sieci, wskazanejest "
-#~ "wybranie \"Pliki lokalne\" jak sposobu autentykacji."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Powiniene¶ utworzyæ jedno lub wiêcej kont \"zwyk³ych\" u¿ytkowników\n"
-#~ "bêd±cych przeciwieñstwem konta \"uprzywilejowanego\" u¿ytkownika\n"
-#~ "- roota. Mo¿esz utworzyæ jedno lub wiêcej kont dla ka¿dej osoby, której\n"
-#~ "chcesz umo¿liwiæ korzystanie z komputera. Pamiêtaj, ¿e ka¿de konto ma\n"
-#~ "indywidualne ustawienia (¶rodowisko graficzne, ustawienia programów,"
-#~ "itp.)\n"
-#~ "oraz w³asny \"katalog domowy\", w których te ustawienia s± zapisywane.\n"
-#~ "\n"
-#~ "\n"
-#~ "Przede wszystkim, utwórz konto dla samego siebie!. Nawet je¶li jeste¶\n"
-#~ "jedynym u¿ytkownikiem komputera, NIE KORZYSTAJ z konta roota do\n"
-#~ "codziennej pracy: jest to bardzo ryzykowne. Czêsto zdarza siê \n"
-#~ "zniszczenie systemu przez zwyk³± literówkê\n"
-#~ "\n"
-#~ "\n"
-#~ "Powiniene¶ wiêc do normalnej pracy w systemie korzystaæ z konta\n"
-#~ "zwyk³ego u¿ytkownika, natomiast konto roota wykorzystywaæ tylko\n"
-#~ "do administracji oraz konfiguracji systemu."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Utworzenie dysku startowego jest bardzo zalecane. Je¶li nie bêdzie\n"
-#~ "mo¿na uruchomiæ komputera, bêdzie to jedyny prosty sposób\n"
-#~ "przywrócenia dzia³ania systemu bez reinstalacji."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ " G³ówne opcje LILO i Grub to:\n"
-#~ "  - urz±dzenie startowe:  urz±dzenie, które zawiera sektor ³aduj±cy\n"
-#~ "zwykle jest to \"/dev/hda\". Wybierz tak, je¿eli nie masz pewno¶ci.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Czas opó¼nienia uruchamiania domy¶lnego systemu:\n"
-#~ "okre¶la, ile czasu masz do rozpoczêcia uruchamiania domy¶lnego systemu.\n"
-#~ "Przydatne bywa w systemach, które s± tak skonfigurowane, ¿e\n"
-#~ "uruchamianie nastêpuje z twardego dysku, natychmiast po uaktywnieniu\n"
-#~ "klawiatury. Program ³aduj±cy nie czeka, je¿eli opó¼nienie jest równe "
-#~ "zero,\n"
-#~ "lub pominiesz tê opcjê,\n"
-#~ " \n"
-#~ "\n"
-#~ "  - Tryb graficzny: okre¶la tryb tekstowy VGA, który powinien byæ "
-#~ "wybrany\n"
-#~ "podczas ³adowania. Opcje to:\n"
-#~ "\n"
-#~ "    * normal: wybierz tryb 80x25.\n"
-#~ "\n"
-#~ "    * <numer>: wybierz tryb o danym numerze.  \n"
-#~ "\n"
-#~ "  - Wyczy¶æ \"/tmp\" po ka¿dym prze³adowaniu: je¶li chcesz skasowaæ\n"
-#~ " wszystkie pliki i katalogi znajduj±ce siê w \"/tmp\" po prze³adowaniu, "
-#~ "zaznacz t± opcjê.  - Okre¶l rozmiar pamiêci, je¶li trzeba; nie istnieje "
-#~ "niestety standardowa metoda\n"
-#~ "sprawdzania w BIOS-ie ilo¶ci pamiêci. W konsekwencji Linux mo¿e "
-#~ "nieprawd³owo\n"
-#~ "wykryæ wielko¶æ pamiêci RAM w twoim komputerze. Nale¿y pamiêtaæ, ¿e "
-#~ "ró¿nica\n"
-#~ "2 do 4 MB miêdzy rozmiarem pamiêci wykrytym, a rzeczywistym jest normalna."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO to program rozruchowy dla SPARC: pozwala on uruchomiæ\n"
-#~ "GNU/Linux lub inny system operacyjny, zainstalowany na twoim komputerze.\n"
-#~ "Normalnie inne systemy s± wykrywane i instalowane. Je¿eli tak nie jest,\n"
-#~ "powiniene¶ \"rêcznie\" wprowadziæ odpowiednie dane. B±d¼ ostro¿ny\n"
-#~ "i wybierz w³a¶ciwe parametry.\n"
-#~ "\n"
-#~ " \n"
-#~ "Mo¿esz oczywi¶cie równie¿ uniemo¿liwiæ dostêp do nich przy starcie "
-#~ "przez \n"
-#~ "usuniêcie ich z listy. W tej sytuacji musisz jednak posiadaæ dyskietki "
-#~ "startowe\n"
-#~ "by je uruchomiæ."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "G³ówne opcje SILO to:\n"
-#~ "  - urz±dzenie startowe:  urz±dzenie, które zawiera sektor ³aduj±cy\n"
-#~ "     Je¶li nie wiesz dok³adnie, co chcesz zrobiæ, wybierz     \"Pierwszy "
-#~ "sektor     dysku (MBR)\"\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Czas opó¼nienia uruchamiania domy¶lnego systemu:\n"
-#~ "    okre¶la, ile czasu masz do rozpoczêcia uruchamiania domy¶lnego "
-#~ "systemu.\n"
-#~ "    To przydaje siê w systemach, które s± tak skonfigurowane, ¿e     "
-#~ "uruchamianie nastêpuje z twardego dysku, natychmiast po w³aczeniu   "
-#~ "klawiatury. Program ³aduj±cy nie czeka, je¿eli opó¼nienie jest równe "
-#~ "zero,\n"
-#~ "    lub pominiesz tê opcjê."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Przyszed³ czas na konfiguracjê systemu X Window, który jest rdzeniem\n"
-#~ "GUI (graficznego interfejsu u¿ytkownika) GNU/Linuxa. W tym celu trzeba\n"
-#~ "skonfigurowaæ kartê graficzn± oraz monitor. Wiêkszo¶æ kroków jest\n"
-#~ "zautomatyzowana, tak wiêc Twoje zadanie polega na weryfikacji tego,\n"
-#~ "co zosta³o zrobione oraz akceptowaniu ustawieñ :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Kiedy konfiguracja zostanie zakoñczona, X-y zostan± uruchomione\n"
-#~ "(o ile tego chcesz), by¶ mo¿na by³o sprawdziæ, czy ustawienia s± "
-#~ "odpowiednie\n"
-#~ "Je¶li nie s± w³a¶ciwe, mo¿esz siê cofn±æ i zmieniæ je, tak wiele\n"
-#~ "razy jak jest to potrzebne."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Je¿eli z konfiguracj± X-ów jest co¶ nie tak, u¿yj tych opcji,\n"
-#~ "w celu poprawnego skonfigurowania X Window System."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Je¿eli chcesz u¿ywaæ graficznego trybu przy logowaniu siê w systemie \n"
-#~ "wybierz \"Tak\". W przeciwnym wypadku wybierz \"Nie\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Mo¿esz okre¶liæ poziom bezpieczeñstwa systemu. Szczegó³owe informacje na "
-#~ "ten temat znajduj± siê w podrêczniku.\n"
-#~ "Je¶li nie wiesz co wybraæ, zachowaj domy¶lne ustawienia.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Teraz nast±pi ponowne uruchomienie systemu.\n"
-#~ "\n"
-#~ "Twój nowy Mandrake Linux zostanie za³adowany automatycznie.\n"
-#~ "Je¿eli chcia³by¶ za³adowaæ inny z posiadanych systemów operacyjnych,\n"
-#~ "przeczytaj dodatkowe instrukcje."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "czeski (programisty)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "s³owacki (programisty)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Nazwa tworzonego profilu:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Zapisz /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "Przywróæ z pliku"
-
-#~ msgid "Save in file"
-#~ msgstr "Zapisz do pliku"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Przywróæ z dyskietki"
-
-#~ msgid "Format all"
-#~ msgstr "Sformatuj wszystko"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Po sformatowaniu wszystkich partycji,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "wszystkie dane znajduj±ce siê na nich zostan± utracone"
-
-#~ msgid "Reload"
-#~ msgstr "Prze³aduj"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Czy utworzyæ dyskietkê instalacji automatycznej w celu powielenia "
-#~ "instalacji?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Konfiguracja ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Korzystaj±c z sieciowego serwera CUPS nie musisz tutaj\n"
-#~ "konfigurowaæ ¿adnych drukarek; zostan± one automatycznie\n"
-#~ "wykryte, chyba ¿e znajduje siê on w innej sieci, w tym przypadku\n"
-#~ "nale¿y podaæ adres serwera CUPS oraz opcjonalnie numer portu."
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "Podaj nazwê drukarki i komentarz"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr " Kolejka sieciowa"
-
-#~ msgid "Pipe into command"
-#~ msgstr "Potok do polecenia"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "Tutaj mo¿na podaæ dowolne polecenie, które zostanie wykonane w "
-#~ "potokuzamiast bezpo¶redniego wys³ania wydruku do drukarki"
-
-#~ msgid "Command line"
-#~ msgstr "Polecenie"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "Nale¿y wpisaæ polecenie!"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Monitorowanie sieci"
-
-#~ msgid "Settings"
-#~ msgstr "Ustawienia"
-
-#~ msgid "Profile "
-#~ msgstr "Profil "
-
-#~ msgid "Statistics"
-#~ msgstr "Statystyki"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Szybko¶æ wysy³ania: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Szybko¶æ odbierania: "
-
-#~ msgid "Connection Time: "
-#~ msgstr "Czas po³±czenia:"
-
-#~ msgid "Logs"
-#~ msgstr "Logi"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Po³±czenie z Internetem"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Roz³±cz po³±czenie z Internetem"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Roz³±czenie po³±czenia powiod³o siê."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Roz³±czono."
-
-#~ msgid "Connection complete."
-#~ msgstr "Po³±czono."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Po³±czenie nie powiod³o siê. Sprawd¼ konfiguracjê w w Centrum Sterownia "
-#~ "Mandrake."
-
-#~ msgid "Color configuration"
-#~ msgstr "Konfiguracja kolorów"
-
-#~ msgid "sent: "
-#~ msgstr "wys³ano: "
-
-#~ msgid "received: "
-#~ msgstr "odebrano: "
-
-#~ msgid "average"
-#~ msgstr "¶rednio"
-
-#~ msgid "Connect"
-#~ msgstr "Po³±cz"
-
-#~ msgid "Disconnect"
-#~ msgstr "Roz³±cz"
-
-#~ msgid "/File/_New"
-#~ msgstr "/Plik/_Nowy"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>N"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/Plik/_Otwórz"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>O"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/Plik/Zapi_sz"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/Plik/Z_apisz jako"
-
-#~ msgid "/File/-"
-#~ msgstr "/Plik/-"
-
-#~ msgid "/_Options"
-#~ msgstr "/_Opcje"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/Opcje/Test"
-
-#~ msgid "/_Help"
-#~ msgstr "/Pomo_c"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/Pomoc/O _programie"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Domy¶lny tryb uruchamiania"
-
-#~ msgid "Europe"
-#~ msgstr "Europa"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "Usuñ kolejkê"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Zawarto¶æ pliku konfiguracyjnego nie mo¿e zostaæ zinterpretowana."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Niepoprawny plik konfiguracyjny"
-
-#~ msgid "Adapter"
-#~ msgstr "Karta"
-
-#~ msgid "Disable network"
-#~ msgstr "Wy³±czenie sieci"
-
-#~ msgid "Enable network"
-#~ msgstr "W³±czenie sieci"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Mo¿na teraz przetestowaæ mysz. U¿yj przycisków i kó³ka by sprawdziæ,\n"
-#~ "czy ustawienia s± w³a¶ciwe. Je¶li nie, wybierz \"Anuluj\" by wybraæ inny\n"
-#~ "sterownik."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Po³±czenie DSL (lub ADSL)"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Zamknij"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Mo¿na bezpo¶rednio podaæ URI okre¶laj±ce dostêp do drukarki w CUPS"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Tak, wydrukuj stronê testow± ascii"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Tak, wydrukuj graficzn± stronê testow±"
-
-#~ msgid "Yes, print both test pages"
-#~ msgstr "Tak, wydrukuj obie strony testowe"
-
-#~ msgid "Paper Size"
-#~ msgstr "Rozmiar papieru"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Wysun±æ stronê po wydruku?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Opcje sterownika uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Opcje g³êbi kolorów"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Drukowaæ tekst jako PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Usun±æ efekt schodków?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Ilo¶æ stron na stronie wydruku"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Lewy/Prawy margines w punktach (1/72 cala) "
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Górny/Dolny margines w punktach (1/72 cala)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Dodatkowe opcje GhostScriptu"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Dodatkowe opcje dla tekstu"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Odwrotna kolejno¶æ stron"
-
-#~ msgid "CUPS starting"
-#~ msgstr "Uruchamianie CUPS"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Wybierz sposób pod³±czenia drukarki sieciowej"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected.\n"
-#~ "In case of doubt, select \"Remote CUPS server\"."
-#~ msgstr ""
-#~ "Przy korzystaniu z sieciowego serwera CUPS, drukarki\n"
-#~ "zostan± automatycznie wykryte, nie ma potrzeby ich konfiguracji.\n"
-#~ "W przypadku w±tpliwo¶ci, wybierz \"Sieciowy serwer CUPS\"."
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Ka¿da drukarka wymaga nazwania (na przyk³ad lp)\n"
-#~ "Mo¿na te¿ zdefiniowaæ inne parametry jak opis drukarki lub jej "
-#~ "lokalizacjê\n"
-#~ "Jak± nazwê u¿yæ dla tej drukarki oraz w jaki sposób jest ona pod³±czona?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Ka¿da kolejka drukarki (drukuje zadanie skierowane do niej)\n"
-#~ "wymaga nazwania (czêsto lp) oraz przypisania katalogu na bufor.\n"
-#~ "Jak nazwaæ katalog przypisany do kolejki oraz jak drukarka jest "
-#~ "pod³±czona?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nazwa kolejki:"
-
-#~ msgid "Spool directory"
-#~ msgstr "Katalog bufora:"
-
-#~ msgid "Disable"
-#~ msgstr "Wy³±czyæ"
-
-#~ msgid "Enable"
-#~ msgstr "W³±czyæ"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "By zwiêkszyæ poziom bezpieczeñstwa systemu nale¿y w³±czyæ:\n"
-#~ "\"U¿yj pliku shadow\" i \"U¿yj d³ugich hase³ MD5\" "
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Je¿eli Twoja sieæ u¿ywa NIS (systemu informacji sieciowej),\n"
-#~ "wybierz \"U¿yj NIS\". \n"
-#~ "Je¿eli nie jeste¶ pewien, spytaj administratora sieci."
-
-#~ msgid "yellow pages"
-#~ msgstr "¿ó³te strony"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Konfiguracja sieci lokalnej"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1 dostawcy"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2 dostawcy"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Jak chcesz ³±czyæ siê Internetem?"
-
-#~ msgid "cannot fork: "
-#~ msgstr "cannot fork: "
-
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "Konfiguracja Lilo/Grub"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Rozmiar wybranych %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Otwieranie po³±czenia..."
-
-#~ msgid "Configure..."
-#~ msgstr "Konfiguruj..."
-
-#~ msgid "Standard tools"
-#~ msgstr "Narzêdzia standardowe"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Ten skrypt startowy ³aduje modu³ obs³uguj±cy mysz usb."
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Konfiguracja sposobu uruchamiania"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Po³±czenie z Internetem jest skonfigurowane.\n"
-#~ "Mo¿na skonfigurowaæ komputer jako wspó³dziel±cy po³±czenie z Internetem\n"
-#~ "Ta us³uga pozwala innym komputerom w sieci lokalnej na u¿ywanie "
-#~ "po³±czenia\n"
-#~ "tego komputera z Internetem.\n"
-#~ "\n"
-#~ "Uwaga:  wymagana jest dedykowana karta sieciowa w³±czaj±ca komputer w "
-#~ "sieæ lokaln± (LAN)\n"
-#~ "Czy chcesz konfigurowaæ wspó³dzielenie po³±czenia z Internetem?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Automatyczne sprawdzanie zale¿no¶ci"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Konfiguracja LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Utwórz dysk startowy"
-
-#~ msgid "Format floppy"
-#~ msgstr "Formatuj dyskietkê"
-
-#~ msgid "Choice"
-#~ msgstr "Wybór"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Teraz mo¿esz wybraæ ró¿ne dodatkowe opcje dla Twojego systemu.\n"
-#~ "\n"
-#~ "* U¿ywaæ optymalizacji dysku: ta opcja mo¿e zwiêkszyæ szybko¶æ twardego\n"
-#~ "dysku, ale jest opcj± tylko dla zaawansowanych u¿ytkowników: \n"
-#~ "niektóre kiepskie chipsety mog± zniszczyæ Twoje dane, b±d¼ wiêc czujny!\n"
-#~ "Kernel ma wprawdzie wbudowan± czarn± listê chipsetów, ale je¶li chcesz \n"
-#~ "unikn±æ przykrej niespodzianki, lepiej nie wybieraæ tej opcji.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Wybierz poziom bezpieczeñstwa: mo¿esz wybraæ poziom bezpieczeñstwa \n"
-#~ "dla twojego systemu. Zajrzyj do podrêcznika po szczegó³ow± informacjê,\n"
-#~ "lub po prostu,je¶li nie wiesz, co zrobiæ , wybierz \"¶redni\" ; \n"
-#~ "\n"
-#~ "\n"
-#~ "* Sprecyzuj rozmiar pamiêci, je¿eli trzeba: niestety w dzisiejszym "
-#~ "¶wiecie\n"
-#~ "pecetów nie ma standardowej metody zapytania BIOS-u o wielko¶æ pamiêci.\n"
-#~ "Tak wiêc GNU/Linux mo¿e wykryæ nieprawid³owo Twoj± pamiêæ. \n"
-#~ "W tym wypadku podaj prawid³ow± wielko¶æ\n"
-#~ "Uwaga: ró¿nica o 2 lub 4 MB jest normalna.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Automatyczne montowanie wyjmowanych dysków: Je¿eli nie chcesz\n"
-#~ "\"rêcznie\" montowaæ mediów typu CD, stacja dyskietek, Zip,\n"
-#~ "zaznacz tê opcjê\n"
-#~ "\n"
-#~ "\n"
-#~ "* Wyczy¶æ /tmp przy ka¿dym starcie systemu: zaznacz t± opcjê, je¶li\n"
-#~ "je¶li chcesz kasowaæ wszystkie pliki i katalogi zapiasane w /tmp przy \n"
-#~ "starcie systemu,\n"
-#~ "\n"
-#~ "\n"
-#~ " - W³±cz NumLock przy starcie: zaznacz t± opcjê, je¶li chcesz uaktywniæ\n"
-#~ " klawiaturê numeryczn± po stacie Uwaga : W X-ach klawisz NumLock mo¿e "
-#~ "dzia³aæ lub nie, nie uaktywniaj te¿\n"
-#~ "tej opcji w przypadku laptopów."
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Dostêp do Internetu/sieci lokalnej"
-
-#~ msgid "Mail information"
-#~ msgstr "Informacje o poczcie"
-
-#~ msgid "Firewall Configuration Wizard"
-#~ msgstr "Kreator konfiguracji zapory sieciowej"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Ró¿ne"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Ró¿ne pytania"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr ""
-#~ "Nie mo¿na u¿ywaæ supermount\n"
-#~ "przy ustawionym wysokim poziomie bezpieczeñstwa"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Ostrze¿enie: PRZY TYM POZIOMIE BEZPIECZEÑSTWA NIE JEST MO¯LIWE\n"
-#~ "BEZPO¦REDNIE REJESTROWANIE SIÊ Z KONSOLI NA ROOTA! \n"
-#~ "Nale¿y zarejestrowaæ siê jako zwyk³y u¿ytkownik, nastêpnie u¿yæ \"su\".\n"
-#~ "W ogólno¶ci: komputer w tej konfiguracji nadaje siê wy³±cznie na serwer.\n"
-#~ "Zosta³e¶ ostrze¿ony."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "B±d¼ ostro¿ny, uaktywnienie numlock mo¿e powodowaæ\n"
-#~ "problemy z wypisywaniem cyfr zamiast liter (np. naci¶niêcie \"p\" daje \"6"
-#~ "\")"
-
-#~ msgid "Actions"
-#~ msgstr "Czynno¶ci"
-
-# ../../share/compssUsers
-#~ msgid "Scientific applications"
-#~ msgstr "Programy naukowe"
-
-#~ msgid "toot"
-#~ msgstr "toot"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Pierwszy serwer DNS"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Drugi serwer DNS"
-
-#~ msgid "using module"
-#~ msgstr "u¿ycie modu³u"
-
-#~ msgid "Development, Database"
-#~ msgstr "Programowanie, bazy danych"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Programowanie, narzêdzia standardowe"
-
-#~ msgid "loopback"
-#~ msgstr "plikopartycja"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Którego programu rozruchowego chcesz u¿yæ?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Dyskietka automatycznej instalacji"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Spróbowaæ wykryæ modem?"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Wy³±czenie po³±czenia z Internetem"
-
-#~ msgid "Configure local network"
-#~ msgstr "Konfiguracja sieci lokalnej"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Konfiguracja po³±czenia z Internetem / Konfiguracja sieci lokalnej"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Sieæ lokalna zosta³a ju¿ skonfigurowana.\n"
-#~ "Czy chcesz:"
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Skonfiguruj ponownie korzystaj±c z kreatora..."
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Obróbka grafiki"
-
-#~ msgid "Multimedia"
-#~ msgstr "Multimedia"
-
-#~ msgid "Sciences"
-#~ msgstr "Nauki"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Rozmowy chat: (IRC lub natychamiastowa komunikacja) programy jak xchat, "
-#~ "licq, gaim, oraz narzêdzia transferu plików"
-
-#~ msgid "Communication facilities"
-#~ msgstr "U³atwienia komunikacyjne"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Narzêdzia internetowe"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Bazy danych (mysql i postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Programowanie C/C++"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Konfiguracja strefy czasowej"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Karta sieciowa 1 (eth0):"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(mo¿e byæ przyczyn± zniszczenia danych)"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "U¿yæ optymalizacji dysku?"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Uaktywnienie num lock przy starcie"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Potwierd¼ has³o:"
-
-#~ msgid "default"
-#~ msgstr "domy¶lne"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Jakie jest zastosowanie komputera?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Okre¶l rozmiar przeznaczony na instalacjê"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "U¿yj diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "U¿ytkownika"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Jeste¶ pewien, ¿e jeste¶ ekspertem? \n"
-#~ "Bêdziesz mia³ du¿e uprawnienia, co mo¿e byæ niebezpieczne.\n"
-#~ "\n"
-#~ "Bêdziesz pytany np. o \"U¿yj pliku shadow dla hase³?\n"
-#~ "Czy potrafisz odpowiedzieæ na tego typu pytania?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "U¿yj pliku shadow"
-
-#~ msgid "shadow"
-#~ msgstr "shadow"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "U¿yj hase³ kodowanych MD5"
-
-#~ msgid "Search"
-#~ msgstr "Znajd¼"
-
-#~ msgid "Package"
-#~ msgstr "Pakiet"
-
-#~ msgid "Text"
-#~ msgstr "Tekst"
-
-#~ msgid "Tree"
-#~ msgstr "Drzewo"
-
-#~ msgid "Sort by"
-#~ msgstr "Sortowanie wg"
-
-#~ msgid "Category"
-#~ msgstr "Kategoria"
-
-#~ msgid "See"
-#~ msgstr "Patrz"
-
-#~ msgid "Installed packages"
-#~ msgstr "Zainstalowane pakiety"
-
-#~ msgid "Available packages"
-#~ msgstr "Dostêpne pakiety"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Poka¿ tylko pozosta³e"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Dodaj po³o¿enie pakietów"
-
-#~ msgid "Update location"
-#~ msgstr "Po³o¿enie uaktualnieñ"
-
-#~ msgid "Remove"
-#~ msgstr "Usuñ"
-
-#~ msgid "Find Package"
-#~ msgstr "Szukaj pakietu"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Znajd¼ pakiet zawieraj±cy plik"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Prze³±cze miêdzy zainstalowanymi i dostêpnymi"
-
-#~ msgid "Choose package to install"
-#~ msgstr "Wybierz pakiety do zainstalowania"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Sprawdzanie zale¿no¶ci"
-
-#~ msgid "Wait"
-#~ msgstr "Czekaj"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Zostan± odinstalowane nastêpuj±ce pakiety"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "Oddnstalowanie pakietów"
-
-#~ msgid "Regexp"
-#~ msgstr "Wyra¿enie regularne"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Jakiego pakietu szukasz?"
-
-#~ msgid "%s not found"
-#~ msgstr "nie znaleziono %s "
-
-#~ msgid "No match"
-#~ msgstr "Nic nie pasuje"
-
-#~ msgid "No more match"
-#~ msgstr "Nic wiêcej nie pasuje"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "Teraz rpmdrake zostanie ponownie uruchomiony,\n"
-#~ "aby umo¿liwiæ szukanie zbiorów."
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Którego pliku szukasz?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Czego szukasz?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Podaj termin (n.p. ``extra'', ``commercial'')"
-
-#~ msgid "Directory"
-#~ msgstr "Katalog"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "CD niedostêpny ( nic w katalogu /mnt/cdrom )."
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL katalogu zawieraj±cego RPM-y."
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Dla po³±czenia FTP lub HTTP musisz podaæ po³o¿enie pliku hdlist\n"
-#~ "wzglêdem adresu powy¿ej."
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Wy¶lij nastêpuj±ce informacje"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s jest ju¿ u¿ywane"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Aktualizacja bazy RPM-ów."
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Zostanie usuniêta pozycja %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Znajdowanie pozosta³ych"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Znajdowanie pozosta³ych zajmie trochê czasu"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Wykryto kartê ISDN:\n"
-
-#~ msgid "France"
-#~ msgstr "Francja"
-
-#~ msgid "Other countries"
-#~ msgstr "Inne kraje"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "W jakim kraju przebywasz?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Modem Alcatel"
-
-#~ msgid "ECI modem"
-#~ msgstr "Modem ECI"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "Je¶li Tój modem to Alcatel, wybierz Alcatel, je¶li nie, wybierz ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "nie u¿ywaj pppoe"
-
-#~ msgid "mandatory"
-#~ msgstr "niezbêdny"
-
-#~ msgid "interesting"
-#~ msgstr "interesuj±cy"
-
-#~ msgid "i18n (important)"
-#~ msgstr "lokalizacja (wa¿ny)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "lokalizacja (bardzo fajny)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (przydatny)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Do którego portu szeregowego jest pod³±czona mysz?"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, biblioteki, narzêdzia"
-
-#~ msgid "Czech"
-#~ msgstr "czeski"
-
-#~ msgid "Slovakian"
-#~ msgstr "s³owacki"
diff --git a/perl-install/share/po/pt.po b/perl-install/share/po/pt.po
deleted file mode 100644
index 6db9fe781..000000000
--- a/perl-install/share/po/pt.po
+++ /dev/null
@@ -1,8482 +0,0 @@
-# DRAKX PT .PO FILE.
-# Copyright (C) 1999 MandrakeSoft
-# Andrei <andreib@zaz.com.br>, 1999-2000
-# Paulo Cardoso <paulo@ejs.is>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-03-10 19:37GMT\n"
-"Last-Translator: Jorge Costa <jorgercosta@netc.pt>\n"
-"Language-Team: Portuguese <pt@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.2\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Configurar todas as cabeças independentemente"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Usar extenção Xinerama"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configurar placa única \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Configuração Multi-Cabeça"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"O seu sistema suporta configuração multi-cabeça.\n"
-"O que deseja afazer?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Placa Gráfica"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Seleccione uma placa gráfica"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Escolha um servidor X"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "servidor  X"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Qual a configuração do Servidor X que deseja ter?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A sua placa pode ter suporte para aceleração 3D por hardware mas só com o "
-"XFree%s.\n"
-"A sua placa é suportada pelo XFree %s que pode ter um melhor suporte para 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"A sua placa pode ter suporte para aceleração 3D por hardware com o XFree%s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s com aceleração 3D por hardware"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"A sua placa pode ter suporte para aceleração 3D por hardware com o XFree%s,\n"
-"ATENÇÃO ESTE SUPORTE É EXPERIMENTAL E PODE CONGELAR O SEU COMPUTADOR."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s com aceleração 3D por hardware EXPERIMENTAL"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A sua placa pode ter suporte para aceleração 3D por hardware com o XFree%s,\n"
-"ATENÇÃO ESTE SUPORTE É EXPERIMENTAL E PODE CONGELAR O SEU COMPUTADOR.A sua "
-"placa é suportada pelo XFree %s que pode ter um melhor suporte para 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "Configuração do XFree"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Seleccione o tamanho da memória da sua placa gráfica"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Escolha as opções para o servidor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Escolha um monitor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dois parâmetros críticos são a taxa de refrescamento vertical, que é a taxa\n"
-"em que todo o ecrã é refrescado, e principalmente a taxa de sincronização\n"
-"horizontal, que é a taxa em que 'scanlines' são mostradas.\n"
-"\n"
-"É MUITO IMPORTANTE que não especifique um tipo de monitor com taxa de "
-"actualização\n"
-"para além das capacidades do seu monitor: pode danificar seu monitor.\n"
-" Se tiver dúvidas, escolha definições conservadoras."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Taxa de refrescamento horizontal"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Taxa de refrescamento vertical"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Monitor não configurado"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Placa gráfica ainda não configurada"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Resoluções ainda não escolhidas"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Quer testar a configuração?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Aviso: o teste desta placa gráfica pode congelar o seu computador"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Teste da configuração"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"tente alterar alguns parâmetros"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Ocorreu um erro:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "A sair em %d segundos"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Esta é a definição correcta?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ocorreu um erro, tente alterar alguns parâmetros"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Resolução"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Escolha a resolução e a profundidade de cor"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Placa Gráfica: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Modo de Perito"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Mostrar tudo"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Resoluções"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tipo de teclado: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo de Rato: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo Rato: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Sincronização Horizontal do Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Refrescamento Vertical do Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Placa Gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Placa Gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memória gráfica: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profundidade de cor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolução: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Driver XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "A preparar a configuração X-Window"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "O que deseja fazer?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Alterar Monitor"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Alterar Placa Gráfica"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Alterar opções do Servidor"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Alterar Resolução"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Mostrar informação"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Testar de novo"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Sair"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Manter alterações?\n"
-"A configuração actual é:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Por favor volte a entrar no %s para activar a alterações"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Por favor saía e depois utilize Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X ao iniciar"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Eu posso configurar o computador para iniciar automaticamente o X após o "
-"arranque.\n"
-"Gostaria de iniciar o X quando voltar a arrancar?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 cores (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil cores (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil cores (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milhões de cores (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milhões de cores (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB ou mais"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA Padrão, 640x480 a 60 Hz Padrão"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatível com 8514, 1024x768 a 87 Hz entrelaçado (sem 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz entrelaçado, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA Alargado, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA Não-entrelaçado, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA de Alta Frequência, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequência que consegue 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequência que consegue 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequência que consegue 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor que consegue1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor que consegue1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Primeiro sector da partição de arranque"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Primeiro sector do disco (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "Instalação do SILO"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Onde quer instalar o carregador de arranque?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "Instalação do LILO/grub"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO com menu em texto"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO com menu gráfico"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Arrancar do DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Principais opções do carregador de arranque"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Carregador de arranque deve usar"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Instalação do carregador de arranque"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Dispositivo de arranque"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (não funciona com BIOS antigas)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Compacto"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "compacto"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Modo de Vídeo"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Tempo de espera antes de arrancar na imagem padrão"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Senha"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Senha (de novo)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Restringir opções da linha de comando"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "restringir"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Limpar /tmp a cada arranque"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Tamanho da RAM preciso se necessário (%d MB encontrados)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Activar multi-perfis"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Indicar o tamanho da RAM em Mb"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opção ``Restringir opções da linha de comando'' não tem uso sem senha"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Por favor tente novamente"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "As senhas não coincidem"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Mensagem Init"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Abrir tempo de espera de Firmware"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Tempo limite de Arranque do Kernel"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Activar Arranque de CD?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Activar de Arranque?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "SO por omissão?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Aqui estão a diferentes entradas.\n"
-"Pode adicionar mais ou alterar as existentes"
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Adicionar"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Pronto"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Modificar"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Qual tipo de entrada que quer adicionar?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Outros SO (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Outros SO (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Outros SO (windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Imagem"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Adicionar"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Leitura-Escrita"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tabela"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Inseguro"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Rótulo"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Por omissão"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Tamanho-Initrd"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "SemVídeo"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Remover entrada"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Não é permitido um rótulo vazio"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Este rótulo já está a ser utilizado"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Interfaces %s %s encontrados"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Tem algum outro?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Tem algum interface %s?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Não"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Sim"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Ver informação do hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "A instalar o driver para %s placa %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(módulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Qual driver %s que eu deveria tentar?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Em alguns casos, o driver %s precisa de informações extra para funcionar\n"
-"correctamente, mas ele normalmente funciona bem sem estas informações.\n"
-"Deseja especificar opções extras ou deixar o driver localizar na sua\n"
-"máquina as informações que ele precisa? Ocasionalmente, isso poderá\n"
-"travar o computador, mas não deve causar algum dano."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Auto-procurar"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Especificar opções"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Agora pode indicar as opções para o módulo %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Agora pode definir as opções para o módulo %s.\n"
-"As opções estão no formato ``nome=valor nome2=valor2 ...''\n"
-"Para exemplo, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Opções do módulo:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"O carregamento do módulo %s falhou.\n"
-"Quer tentar novamente com outros parâmetros?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(já adicionado %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Essa senha é demasiado simples"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Por favor indique um nome de utilizador"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"O nome de utilizador deve conter apenas letras minúsculas, números, `-' e `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Este nome de utilizador já foi adicionado"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Adicionar utilizador"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introduza um utilizador\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Aceitar utilizador"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Nome real"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Nome de utilizador"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Ícone"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Eu posso configurar o computador para iniciar automaticamente o X após o "
-"arranque.\n"
-"Gostaria de iniciar o X quando voltar a arrancar?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Escolha o utilizador por omissão :"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Escolha o gestor de janelas a correr:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Por favor escolha o idioma a ser utilizado."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "Pode escolher outros idiomas que estarão disponíveis após a instalação"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Tudo"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Bem vindo ao %s o seleccionador de Sistema Operativo!\n"
-"\n"
-"Escolha um Sistema Operativo da lista acima ou\n"
-"espere %d segundos pelo arranque por omissão.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bem-Vindo ao GRUB o seleccionador de Sistema Operativo!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use a tecla %c e %c  para escolher qual a entrada seleccionada."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Prima 'enter' para arrancar o SO seleccionado, 'e' para editar os"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "comandos antes de arrancar, ou 'c' para linha de comando."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-"A opção seleccionada vai arrancar automaticamente dentro de %d segundos."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "não há espaço suficiente em /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Ambiente de trabalho"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Menu Iniciar"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Onde quer instalar o carregador de arranque?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "nenhuma ajuda implementada ainda.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuração do Estilo de Arranque"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Ficheiro"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Ficheiro/_Sair"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>S"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Monitor de Categorização NewStyle"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor NewStyle"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor Tradicional"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor Tradicional Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Iniciar Aurora no arranque"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Modo lilo/grub"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Está correntemente a usar %s como Gestor de Arranque.\n"
-"Clique em Configurar para iniciar o assistente de configuração."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Configurar"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Modo de arranque"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Modo do sistema"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Iniciar o X-Window na inicialização"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Não, eu não quero autologin"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Sim, eu quero autologin com este (utilizador, ambiente de trabalho)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "não possível abrir /etc/inittab para leitura: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "A Instalação do LILO falhou. Ocorreram os seguintes erros:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutos"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d segundos"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Por favor faça primeiro uma cópia de segurança dos seus dados"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Leia com atenção!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Se planear usar aboot, lembre-se de deixar espaço livre (2048 sectores é "
-"suficiente)\n"
-"no início do disco"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Erro"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Assistente"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Novo"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "Fila remota"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Ponto de Montagem"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Opções"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Desmontar"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Montar"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Escolher acção"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tem uma partição FAT grande \n"
-"(normalmente utilizada pelo MicroSoft Dos/Windows.)\n"
-"Sugiro que redimensione primeiro a partição\n"
-"(clique nela, depois clique em \"Redimensionar\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Por favor clique numa partição"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Por favor clique numa partição"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Por favor clique numa partição"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Detalhes"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "falhou ao montar"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Vazio"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Outro"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Tipos de sistema de ficheiros:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Criar"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Use ``%s'' ao invés"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Eliminar"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Use ``Desmontar'' primeiro"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Após alterar o tipo de partição %s, todos os dados desta partição serão "
-"perdidos"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Onde deseja montar o dispositivo %s?"
-
-#: ../../diskdrake.pm_.c:500
-#, fuzzy
-msgid "Mount options"
-msgstr "Opções do módulo:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:525
-#, fuzzy
-msgid "Removable media"
-msgstr "Automontagem de Médias Amovíveis"
-
-#: ../../diskdrake.pm_.c:532
-#, fuzzy
-msgid "Change type"
-msgstr "Alterar tipo de partição"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Que sistema de ficheiros deseja?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Servidor"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Escolher acção"
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Criar uma nova partição"
-
-#: ../../diskdrake_interactive.pm_.c:188
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Alternar para modo perito"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Alternar para modo normal"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Anular"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Continuar mesmo assim?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Sair sem guardar"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Sair sem gravar na tabela de partição?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Quer testar a configuração?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Auto alocar"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Limpar tudo"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Mais"
-
-#: ../../diskdrake_interactive.pm_.c:250
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Detecção de discos rígidos"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Sem espaço livre suficiente para auto-alocação"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Todas as partições primárias estão usadas"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Eu não posso adicionar mais nenhuma partição"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Para ter mais partições, por favor elimine uma para poder criar uma partição "
-"extendida"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Alterar tipo de partição"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Tentando resgatar tabela de partições"
-
-#: ../../diskdrake_interactive.pm_.c:287
-#, fuzzy
-msgid "Rescue partition table"
-msgstr "Tentando resgatar tabela de partições"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Alterar tipo de partição"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Automontagem de Médias Amovíveis"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Seleccione ficheiro"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"A tabela de partições de segurança não tem o \n"
-"mesmo tamanho. Continuar mesmo assim?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Aviso"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Insira uma disquete no drive\n"
-"Todos os dados na disquete serão perdidos"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Tentando resgatar tabela de partições"
-
-#: ../../diskdrake_interactive.pm_.c:340
-#, fuzzy
-msgid "Detailed information"
-msgstr "Mostrar informação"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Redimensionar"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Mover"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formatar"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Activo"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Adicionar ao RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Adicionar ao LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Remover do RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Remover do LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Modificar RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Usar para loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Criar uma nova partição"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Sector inicial: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Tamanho em MB: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Tipo do Sistema de Ficheiros: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Ponto de montagem: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Preferência: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "A formatar o ficheiro loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Alterar tipo de partição"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Onde deseja montar o ficheiro loopback %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Não posso remover a definição do ponto de montagem enquanto \n"
-"a partição for usada para loopback. Remova o loopback primeiro"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "A computar limites do sistema de ficheiros FAT"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "A redimensionar"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Esta partição não é redimensionável"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Deveria fazer uma cópia de segurança de todos os dados nesta partição"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Após redimensionar a partição %s, todos os dados da partição serão perdidos"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Escolha o novo tamanho"
-
-#: ../../diskdrake_interactive.pm_.c:591
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Tamanho em MB: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Para qual disco quer mover?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Para qual sector quer mover?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "A mover"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "A mover partição..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Escolha um RAID existente para adicionar a"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "novo"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Escolha um LVM existente para adicionar a"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "Nome do LVM?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Essa partição não pode ser usada para loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Nome do ficheiro loopback: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nome real"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "O ficheiro já é utilizado por outro loopback, escolha outro"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "O ficheiro já existe. Utilizá-lo?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "dispositivo"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "nível"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "tamanho do bloco"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Tenha cuidado: essa operação é perigosa."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Que tipo de particionamento?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Lamento, eu não aceitarei criar /boot tão distante no disco (num cilindro > "
-"1024).\n"
-"Ou usa o LILO e ele não funcionará, ou você não usa o LILO e não precisará "
-"de /boot"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"A partição que você seleccionou para adicionar como root (/) é fisicamente "
-"localizada para além\n"
-"do cilindro 1024 do disco rígido, e não possui uma partição /boot.\n"
-"Se quer usar o gestor de arranque LILO, tenha cuidado em adicionar uma "
-"partição /boot."
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Seleccionou uma partição software RAID como root (/).\n"
-"Nenhum gestor de arranque não consegue acedê-lo sem uma\n"
-"partição /boot. Tenha o cuidado de adicionar uma partição /boot"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "A tabela de partições do drive %s vai ser escrita no disco!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Precisará re-arrancar antes que as modificações tenham efeito"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Após formatar a partição %s, todos os dados desta partição serão perdidos"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "A formatar"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "A formatar o ficheiro loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "A formatar a partição %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid falhou"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Sem espaço livre suficiente para alocar as novas partições"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Sem espaço livre suficiente para alocar as novas partições"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Resolução: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Dispositivo: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Letra do drive no DOS: %s (apenas um palpite)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Tipo: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Nome: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Inicial: sector: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Tamanho: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectores"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Cilindro %d ao cilindro %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Formatado\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Não formatado\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Montado\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Ficheiro(s) loopback: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partição de arranque por omissão\n"
-"    (para arranque do MS-DOS, não para o lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Nível %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Tamanho do bloco %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discos RAID %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nome do ficheiro loopback: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"É provável que esta partição seja\n"
-"uma partição Driver, não lhe\n"
-"deve mexer.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Esta é uma partição especial\n"
-" Bootstrap serve para o \n"
-"duplo arranque do seu sistema.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Tamanho: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilindros, %s cabeças, %s sectores\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Informação: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discos LVM %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo da tabela de partições: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "no barramento %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Opções: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatação de %s falhou"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Não sei como formatar %s no tipo %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "falhou ao montar"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "falhou ao montar: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "erro a desmontar %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simples"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servidor"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Não pode usar JFS em partições menores que 16MB"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Não pode usar ReiserFS em partições menores que 32MB"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Pontos de montagem devem começar com uma /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Já existe uma partição no ponto de montagem %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Não pode usar LVM Logical Volume para o ponto de montagem %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Esta directoria deveria permanecer dentro do sistema de ficheiros root"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Precisa de um verdadeiro sistema de ficheiros (ext2, reiserfs) para este "
-"ponto de montagem\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Erro ao abrir %s para escrita: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ocorreu um erro - nenhum dispositivo válido foi encontrado para criar novos "
-"sistemas de ficheiros. Por favor verifique no hardware a causa deste problema"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Não tem partições!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-
-#: ../../help.pm_.c:376
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"O seu novo sistema operativo Mandrake Linux está ser instalado\n"
-"Essa operação deve demorar algumas minutos (isso depende do tamanho que\n"
-"escolheu para instalar e a velocidade do seu computador).\n"
-"\n"
-"\n"
-"Por favor seja paciente."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Por favor escolha \"Instalar\" caso não exista nenhuma versão anterior do "
-"Mandrake Linux\n"
-"instalado ou se deseja utilizar vários sistemas operativos.\n"
-"\n"
-"\n"
-"Por favor escolha \"Actualizar\" se desejar actualizar uma versão instalada "
-"do Mandrake Linux.\n"
-"\n"
-"\n"
-"Dependendo do seu conhecimento sobre GNU/Linux, você pode escolher um dos "
-"seguintes níveis para instalar\n"
-"ou actualizar o seu Mandrake Linux:\n"
-"\n"
-"* Recomendado: se nunca instalou um sistema GNU/Linux escolha esse. A "
-"instalação será \n"
-"  fácil e serão feitas apenas algumas perguntas.\n"
-"\n"
-"\n"
-"* Personalizado: se estiver familiarizado com o GNU/Linux, pode escolher o "
-"uso primário (estação, \n"
-"  servidor, desenvolvimento) do seu sistema. Responderá a mais perguntas do "
-"que na classe de instalação\n"
-"  \"Recomendada\", precisa então de saber com o GNU/Linux funciona para "
-"poder escolher esse nível.\n"
-"\n"
-"\n"
-"* Perito: se tem um bom conhecimento sobre o GNU/Linux, pode escolher esta "
-"classe. Como \n"
-"  na classe \"Personalizado\", poderá escolher o uso primário (estação, "
-"servidor, desenvolvimento)\n"
-"  Tenha muito cuidado antes de escolher esta classe. Poderá fazer uma "
-"instalação bastante personalizada.\n"
-"  As respostas a algumas questões que podem ser difíceis se não tiver "
-"conhecimento sobre GNU/Linux.\n"
-"  Não escolha esta classe se não souber o que está a fazer."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX tentará localizar adaptadores PCI SCSI. Se o DrakX encontrar\n"
-"um adaptador SCSI e souber qual driver a utilizar, ele será instalado\n"
-"automaticamente\n"
-"\n"
-"\n"
-"Se não possuir adaptadores SCSI, um adaptador ISA SCSI ou um PCI SCSI que\n"
-"DrakX não reconhece, será questionado sobre se algum adaptador SCSI existe "
-"no seu\n"
-"sistema. Se não existirem adaptadores, pode clicar em \"Não\". Se clicar em\n"
-"\"Sim\", uma lista de drivers aparecerá para que possa escolher o seu\n"
-"adaptador.\n"
-"\n"
-"\n"
-"Se tem que especificar manualmente o seu adaptador, DrakX perguntará \n"
-"se quer especificar opções para ele. Pode deixar que o DrakX examine o "
-"hardware\n"
-"para descobrir as opções. Isso normalmente funciona bem.\n"
-"\n"
-"\n"
-"Se não, precisará definir as opções para o driver. Por favor veja o Guia do "
-"Utilizador\n"
-"(capítulo 3, secção \"Recolhendo informações sobre o seu hardware) para "
-"dicas sobre\n"
-"como descobrir essas informações na documentação do hardware, no Web site\n"
-"do fabricante (se tiver acesso à Internet) ou no Microsoft Windows\n"
-"(se o tiver no seu sistema)."
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Seleccionou o(s) seguinte(s) servidor(es): %s\n"
-"\n"
-"\n"
-"Estes servidores são activados por omissão. Não possuem nenhum problema\n"
-"de segurança conhecido, mas algum novo pode ser encontrado. Neste caso, "
-"certifique-se \n"
-"da sua actualização logo que possível.\n"
-"\n"
-"\n"
-"Deseja mesmo instalar estes servidores?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Não é possível usar 'broadcast' sem algum domínio NIS"
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Insira uma disquete no drive %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Para usar esta selecção guardada de pacotes, arranque a instalação com "
-"``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Erro ao ler o ficheiro %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Algum hardware no seu computador precisa de drivers ``proprietários'' \n"
-"para funcionar. Pode encontrar mais informações em: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Tem ter uma partição root.\n"
-"Para isso, crie uma partição (ou clique numa existente).\n"
-"Então escolha a acção ``Ponto de montagem'' e defina-a como `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Tem que ter uma partição swap"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Não possui uma partição swap\n"
-"\n"
-"Continuar mesmo assim?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Tem que ter uma partição swap"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Usar espaço livre"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Sem espaço livre suficiente para alocar as novas partições"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Usar a partição existente"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Não existe nenhuma partição para usar"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Usar a partição Windows para loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Qual partição que quer usar para o Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Escolha os tamanhos"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Tamanho da partição root em MB:"
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Tamanho da partição swap em MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Usar o espaço livre na partição Windows"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Qual partição que quer redimensionar?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Computando limites do sistema de ficheiros do Windows"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"O redimensionador de FAT é incapaz de manipular sua partição, \n"
-"ocorreu o seguinte erro: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"A sua partição Windows está muito fragmentada, corra primeiro o ``defrag''"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATENÇÃO!\n"
-"\n"
-"Drakx vai agora redimensionar sua partição Windows. Tenha cuidado:\n"
-"esta operação é perigosa. Se o não tiver feito ainda, deve correr o\n"
-"scandisk do Windows (e opcionalmente correr o defrag) nesta partição, e\n"
-"então reiniciar a instalação. Também deveria fazer backup dos seus\n"
-"dados. Quando tiver certeza, pressione Ok."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Quanto de espaço quer deixar para o windows em"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "partição %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Falha no redimensionamento FAT: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Não existem partições FAT para redimensionar ou para usar como loopback (ou "
-"não existe espaço suficiente)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Apagar o disco inteiro"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Remover Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Tem mais de um disco rígido, em qual deles quer instalar o linux?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Todas as partições existentes e os dados nelas contidos serão perdidos %s"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Particionamento de disco personalizado"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Usar fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Pode agora particionar %s.\n"
-"Quando terminar, não esqueça de guardar usando `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Não tem espaço livre suficiente na sua partição Windows"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Não consigo encontrar espaço para instalação"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "O assistente de particionamento DrakX encontrou as seguintes soluções:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "O particionamento falhou: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "A ligar a rede"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "A desligar a rede"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ocorreu um erro, mas eu não sei como lidar com ele.\n"
-"Continue a seu próprio risco."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Ponto de montagem %s duplicado"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Alguns pacotes importantes não foram instalados correctamente.\n"
-"O seu drive de cdrom ou o seu cdrom está defeituoso.\n"
-"Verifique o cdrom num computador instalado usando \"rpm -qpl Mandarke/RPMS/*."
-"rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bem-vindo à %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Nenhum drive de disquete disponível"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "A entrar no passo `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Escolha o tamanho que deseja instalar"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Tamanho total:"
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versão: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tamanho: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Escolha os pacotes que deseja instalar"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Informação"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Instalar"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "A instalar"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Por favor aguarde, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Tempo restante "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Tempo total "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "A preparar a instalação"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "A instalar pacote %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Continuar mesmo assim?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Houve um erro na ordenação dos pacotes:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Usar a configuração existente para o X11?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Seu sistema está com poucos recursos. Pode ter algum problema na\n"
-"instalação do Mandrake Linux. Se isso ocorrer, pode tentar instalar usando "
-"o\n"
-"modo texto. Para isso, prima `F1' no quadro de inicialização e escreva "
-"`text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Classe de Instalação"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Por favor escolha uma das seguintes classes de instalação:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"O tamanho total dos grupos que seleccionou é de aproximadamente %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Se deseja instalar menos que esse tamanho,\n"
-"seleccione a percentagem de pacotes que quer instalar.\n"
-"\n"
-"Uma baixa percentagem irá instalar apenas os pacotes mais importantes;\n"
-"uma percentagem de 100%% irá instalar todos os pacotes seleccionados."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Tem espaço em seu disco para apenas %d%% desses pacotes.\n"
-"\n"
-"Se desejar instalar menos que este tamanho,\n"
-"seleccione a percentagem de pacotes que quer instalar.\n"
-"Uma baixa percentagem irá instalar apenas os pacotes mais importantes;\n"
-"uma percentagem de %d%% irá instalar o máximo de pacotes possível."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Será capaz de escolher mais precisamente no próximo passo"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Percentagem de pacotes a serem instalados"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Selecção de Grupo de Pacotes"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Selecção individual de pacotes"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tamanho total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Pacote defeituoso"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nome: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importância: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Não pode seleccionar esse pacote pois não existe espaço livre para o instalar"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Os seguintes pacotes serão instalados"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Os seguintes pacotes serão removidos"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Não pode seleccionar/deselecionar esse pacote"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Este é um pacote obrigatório, tem que ser seleccionado"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Não pode deixar de seleccionar este pacote. Ele já está instalado"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Este pacote tem que ser actualizado\n"
-"Tem certeza que não o quer seleccionar?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-"Não pode deixar de seleccionar este pacote. Ele tem que ser actualizado"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Mostrar automaticamente pacotes seleccionados"
-
-#: ../../install_steps_gtk.pm_.c:460
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Guardar em disquete"
-
-#: ../../install_steps_gtk.pm_.c:461
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Guardar selecção de pacotes"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Minimal install"
-msgstr "Sair da instalação"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "A estimar"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Por favor aguarde, a preparar a instalação"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d pacotes"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Aceitar"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Recusar"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Troque o seu Cd-Rom!\n"
-"\n"
-"Por favor insira o Cd-Rom rotulado \"%s\" no seu drive e prima  Ok quando "
-"estiver pronto.\n"
-"Se não o tiver, prima Cancelar para evitar a instalação deste Cd-Rom."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Houve um erro a instalar os pacotes:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Ocorreu um erro"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Contrato de licença"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teclado"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Por favor escolha o tipo de teclado."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Aqui está a lista completa de teclados disponíveis"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Que classe de instalação deseja?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Instalar/Actualizar"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Isso é uma instalação ou actualização?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Recomendado"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Perito"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Actualizar"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Por favor escolha o tipo de rato."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Porta do Rato"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Por favor escolha a que porta série o rato está ligado."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Emulação de botões"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Emulação Botão 2"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Emulação Botão 3"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "A configurar cartões PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "A configurar IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "sem partições disponíveis"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Procurando partições para encontrar pontos de montagem"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Escolha os pontos de montagem"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Não consigo ler sua tabela de partição, é muito defeituosa para mim :(\n"
-"Eu posso tentar continuar limpando as partições defeituosas (TODOS OS DADOS\n"
-"serão perdidos!). A outra solução é não deixar o DrakX modificar a tabela\n"
-"de partições. (o erro é %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"O DiskDrake falhou na leitura da tabela de partições.\n"
-"Continue por sua conta e risco!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:349
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Escolha as partições que quer formatar"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Partição Root"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Qual a partição root (/) do seu sistema?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Precisa reiniciar para que as modificações na tabela de partição tenham "
-"efeito"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Escolha as partições que quer formatar"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Verificar blocos defeituosos?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "A formatar partições"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "A criar e formatar ficheiro %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Sem 'swap' suficiente para completar a instalação, por favor adicione mais"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "A procurar pacotes disponíveis"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "A procurar pacotes para actualizar"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"O seu sistema não tem espaço suficiente para instalação ou actualização (%d "
-"> %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completa (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Mínima (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomendada (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Personalizado"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:525
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Restaurar da disquete"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Restaurar da disquete"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Selecção de Pacotes"
-
-#: ../../install_steps_interactive.pm_.c:532
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Insira uma disquete no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Guardar em disquete"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "O tamanho seleccionado é maior que o espaço disponível"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se tiver todos os CDs da lista abaixo, clique em Ok.\n"
-"Se não tiver nenhum desses CDs, clique em Cancelar.\n"
-"Se apenas alguns CDs estiverem em falta, desmarque-os e então clique em Ok."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom rotulado como \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalando o pacote %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Configuração pós-instalação"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Insira uma disquete no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Insira uma disquete vazia no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Tem agora a possibilidade de descarregar o software para codificação "
-"(encriptação).\n"
-"\n"
-"ATENÇÃO:\n"
-"Devido a vários requerimentos aplicáveis à este software e impostos\n"
-"por várias jurisdições, o cliente e/ou o utilizador final deste software "
-"deve\n"
-"assegurar-se que as leis da sua jurisdição lhe permitem descarregar, "
-"armazenar e usar este software.\n"
-"\n"
-"Além disso, o cliente e/ou o utilizador final deve estar particularmente "
-"prevenido para\n"
-"não infringir as leis da sua jurisdição. Se o cliente e/ou o utilizador "
-"final\n"
-"não respeitar o previsto nestas leis, poder-lhe-ão ser aplicadas sérias\n"
-"sanções.\n"
-"\n"
-"Em nenhum caso irá a Mandrakesoft ou seu produtores e/ou seus fornecedores\n"
-"ser responsáveis por especiais, indirectos ou acidentais danos seja qual "
-"for\n"
-"(incluindo também mas não limitada a perda de lucros), interrupção de "
-"negócios, perda de informação\n"
-"comercial e outras perdas monetárias, e eventual endividamento e "
-"indemnização a ser\n"
-"paga, de acordo com a decisão do tribunal) saindo do uso, posse, ou do "
-"descarregamento\n"
-"isolado deste software, do qual o cliente e/ou o utilizador final pode "
-"eventualmente\n"
-"ter acesso após ter assinado o acordo presente.\n"
-"\n"
-"\n"
-"Para qualquer pergunta relacionada a esse acordo, favor entrar em contacto "
-"com: \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Escolha um 'mirror' de onde obter os pacotes"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "A contactar o 'mirror' para obter a lista de pacotes disponíveis"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Por favor escolha os pacotes que quer instalar."
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Qual é o seu fuso horário?"
-
-#: ../../install_steps_interactive.pm_.c:813
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "O seu relógio de hardware está definido GMT?"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "Servidor NTP"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Nenhuma impressora"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Sumário"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Rato"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Fuso horário"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Impressora"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "Placa RDIS"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Placa de Som"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "Placa TV"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-#, fuzzy
-msgid "Local files"
-msgstr "Impressora local"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Especificar senha do root"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Nenhuma senha"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Essa senha é muito simples (deve ter ao menos %d caracteres)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Autenticação?"
-
-#: ../../install_steps_interactive.pm_.c:949
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autenticação?"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:951
-#, fuzzy
-msgid "LDAP Server"
-msgstr "Servidor"
-
-#: ../../install_steps_interactive.pm_.c:957
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Autenticação NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "Domínio NIS"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Um disco de arranque oferece uma maneira de arrancar o Linux sem\n"
-"depender de um carregador de arranque normal. Isso é necessário se não "
-"quiser instalar\n"
-"o SILO no seu sistema, ou se outro sistema operativo remover o SILO, ou\n"
-"o se\n"
-"SILO não funcionar com o seu hardware. Um disco de inicialização também\n"
-"pode\n"
-"ser usado com uma imagem de backup do Mandrake deixando muito mais fácil\n"
-"recuperar\n"
-"um sistema com danos severos.\n"
-"\n"
-"Se você quiser criar um disco de inicialização para o seu sistema, insira um "
-"disquete\n"
-"no drive e aperte em \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Primeiro drive de disquetes"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Segundo drive de disquetes"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Saltar"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Uma disquete de arranque personalizada oferece uma maneira de arrancar o "
-"Linux \n"
-" sem um carregador de arranque normal. Isto é necessário se não quiser "
-"instalar\n"
-"o LILO (ou grub) no seu sistema, ou se outro sistema operativo remover\n"
-"o LILO, ou o se LILO não funcionar com o seu hardware. Uma disquete de "
-"arranque\n"
-"personalizada também pode ser usada com uma imagem de backup do Mandrake,\n"
-"tornando muito mais fácil recuperar o sistema com danos graves.\n"
-"Deseja criar uma disquete de arranque para o seu sistema?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Desculpe, nenhum drive de disquetes disponível"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Escolha o drive de disquetes que quer usar para criar a disquete de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Insira uma disquete no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "A criar disquete de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "A preparar o carregador de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Quer usar o aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Erro ao instalar o aboot, \n"
-"tentar forçar a instalação, mesmo que isso destrua a primeira partição?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Instalar carregador de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"A instalação do carregador de arranque falhou. Ocorreram os seguintes erros:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Baixo"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Médio"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Alto"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Escolha o nível de segurança"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Insira uma disquete vazia no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "A criar disquete de auto-instalação"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Alguns passos não estão completos.\n"
-"\n"
-"Quer realmente sair agora?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Parabéns, a instalação está completa.\n"
-"Para informações sobre correcções para esta versão do Mandrake Linux\n"
-"consulte a Errata disponível em http://www.mandrakelinux.com/.\n"
-"\n"
-"Informação sobre como configurar o seu sistema está disponível no\n"
-"capítulo pós-instalação do Oficial Guia do Utilizador do Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Criar disquete de auto instalação"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"A auto instalação pode ser totalmente automatizada se\n"
-"quiser, neste caso, ela tomará de conta do disco\n"
-"rígido!! (com vista a instalação em outra máquina).\n"
-"\n"
-"Pode preferir repetir a instalação.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automático"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Repetir"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Guardar selecção de pacotes"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalação do Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> entre opções  | <Espaço> selecciona | <F12> próximo passo "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu em falta"
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "Escolher acção"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Avançado"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Por favor aguarde"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Expandir Árvore"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Encolher Árvore"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Alternar entre organização plana ou em grupo"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Ambiguidade (%s), seja mais preciso\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Má escolha, tente novamente\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (por omissão %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Sua escolha? (por omissão %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Sua escolha? (por omissão %s introduza `nenhum' para nenhum) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Checo (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Alemão"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Espanhol"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Filandês"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Francês"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norueguês"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Polaco"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Russo"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Sueco"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Teclado Inglês"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "Teclado Americano"
-
-#: ../../keyboard.pm_.c:159
-#, fuzzy
-msgid "Albanian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armênio (velho)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armênio (máquina de escrever)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armênio (Fonético)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbeijão (latino)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Búlgaro"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazileiro (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Bielorusso"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Suíço (layout Alemão)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Suíço (layout Francês)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Checo (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Alemão (sem teclas mortas)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Dinamarquês"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norueguês)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estoniano"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiano (layout \"Russo\")"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiano (layout \"Latin\")"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Grego"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Húngaro"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Israelense"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Israelense (Fonético)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islandês"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Italiano"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japonês 106 teclas"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Teclado coreano"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latino Americano"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituano AZERTY (velho)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituano AZERTY (novo)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituano \"número de colunas\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituano \"fonético\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "Localização"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Macedónio"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Holandês"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Polaco (layout QWERTY)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Polaco (layout QWERTZ)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Português"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Canadiano (Quebec)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Romeno (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Romeno (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Russo (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Eslovaco"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovaco (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovaco (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbeijão (cirílico)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Teclado Tailandês"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Teclado Tailandês"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turco (modelo \"F\" tradicional)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turco (modelo moderno \"Q\")"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ucraniano"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "Teclado Americano (Internacional)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"número de colunas\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavo (latin/cirílico)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Montagens circulares %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Remova os volumes lógicos primeiro\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Rato - SUN"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Padrão"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Rato Genérico PS2 com roda"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 botão"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Genérico"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Roda"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "série"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Rato Genérico com 2 Botões"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Rato Genérico com 3 Botões"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech Série CC (série)"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "Série MM"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Mouse Logitech (serial, tipo C7 antigo)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 botões"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 botões"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "nenhum"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Nenhum Rato"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Por favor teste o rato"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Para activar o rato,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVA SUA RODA!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Terminar"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Próximo ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Isto está correcto?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Ligar à Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"A maneira mais comum de se ligar com adsl é pppoe.\n"
-"Mas algumas ligações usam pptp, poucas usam dhcp.\n"
-"Se não sabe, escolha 'usar pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "usar dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "usar pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "usar pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Qual cliente dhcp que deseja usar?\n"
-"Por omissão é dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nenhum adaptador de rede ethernet foi detectado no seu sistema.\n"
-"Eu não posso configurar este tipo de ligação."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Escolha o interface de rede"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Por favor escolher o adaptador de rede que quer usar para se ligar à Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nenhuma placa de rede encontrada"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "A configurar a rede"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Por favor introduza o nome do seu anfitrião(se souber).\n"
-"Alguns servidores DHCP requerem o nome do anfitrião para funcionar.\n"
-"O nome do anfitrião deve ser um nome de anfitrião totalmente qualificado,\n"
-"como por exemplo ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Nome do anfitrião"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Assistente de Configuração da Rede"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem ISDN externo"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Placa ISDN interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "De que tipo é sua ligação ISDN?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Configuração total (isdn4net)"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Configuração total (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "Configuração ISDN"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Seleccione o seu provedor.\n"
-" Se não estiver na lista, escolha Não Listado"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protocolo de Arranque"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Resto do mundo"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Resto do mundo \n"
-" sem Canal-D (linhas alugadas)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Qual protocolo que quer usar?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Qual tipo de placa tem?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Eu não sei"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Se tiver uma placa ISA, os valores do próximo quadro devem estar correctos.\n"
-"\n"
-"Se tiver uma placa PCMCIA, tem que saber o irq e io da sua placa.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Abortar"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Continuar"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Qual é a sua placa ISDN?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Eu detectei uma placa ISDN PCI, mas não sei qual é o tipo. Por favor "
-"seleccione uma placa PCI no próximo quadro."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nenhuma placa ISDN PCI foi encontrada. Por favor seleccione uma no próximo "
-"quadro."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Por favor escolha a que porta série o seu modem está ligado."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Opções de ligação"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Nome da ligação"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Número do telefone"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "ID de Login"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Baseado em script"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Baseado em terminal"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Nome do domínio"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Primeiro DNS Servidor (opcional)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Second DNS Server (opcional)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Pode desligar ou reconfigurar a sua ligação."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Pode reconfigurar sua ligação."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Está neste momento ligado à Internet."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Pode ligar à Internet ou reconfigurar sua ligação."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Não está neste momento ligado à Internet."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Ligar à Internet"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Desligar da Internet"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Configurar ligação de rede (LAN ou Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Ligação e configuração da Internet"
-
-#: ../../network/netconnect.pm_.c:96
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Pode desligar ou reconfigurar a sua ligação."
-
-#: ../../network/netconnect.pm_.c:105
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Pode desligar ou reconfigurar a sua ligação."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Configuração da Rede"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Por que está a fazer uma instalação em rede a sua rede já está configurada.\n"
-"Clique em OK para manter a configuração, ou Cancelar para reconfigurar a sua "
-"ligação Internet & Rede.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Bem-Vindo ao Assistente de Configuração da Rede\n"
-"\n"
-"Estamos preparados para configurar a sua ligação de rede/Internet.\n"
-"Se não quiser usar a auto-detecção, desmarque a opção.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Escolha o perfil a configurar:"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Usar auto-detecção"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "A detectar dispositivos..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Ligação normal via modem"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "detectado na porta %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "Ligação ISDN"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "detectado %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Ligação à LAN"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "detectado no interface %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Ligação por Cabo"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "ligação por cabo detectada"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "Ligação à LAN"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "placa(s) ethernet detectada(s)"
-
-#: ../../network/netconnect.pm_.c:190
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Escolha a ferramenta que deseja usar"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Ligação à Internet"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Quer iniciar a sua ligação ao iniciar?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Configuração da Rede"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Ocorreu um problema ao reiniciar a rede: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Parabéns. A configuração da rede e da Internet acabou.\n"
-"\n"
-"A configuração será agora aplicada ao seu sistema.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Depois de completado, recomendamos que reinicie o seu \n"
-"ambiente X para evitar o problema da troca de nome do anfitrião."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"AVISO: Esse dispositivo já foi configurado para ligar à Internet.\n"
-"Apenas aceite manter este dispositivo configurado.\n"
-"A modificação dos campos abaixo irá sobrepor esta configuração."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Por favor introduza a configuração IP para esta máquina.\n"
-"Cada item deve ser introduzido como endereço IP ponteado-decimal\n"
-"(por exemplo, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "A configurar dispositivo de rede %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "Endereço IP"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "IP Automático"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "O endereço IP deve estar no formato 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Por favor introduza o nome do seu anfitrião.\n"
-"O nome do anfitrião deve ser um nome de anfitrião totalmente qualificado,\n"
-"como por exemplo ``mybox.mylab.myco.com'' .\n"
-"Também pode introduzir o endereço IP de um gateway se tiver um"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "Servidor DNS"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Dispositivo de gateway"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Configuração de proxies"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "O proxy deve ser http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "O proxy deve ser ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Configuração da Internet"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Quer tentar ligar-se à Internet agora?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "A testar a sua ligação..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "O sistema está agora ligado à Internet."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Por razões de Security, será desligado(a) agora."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"O sistema não aparenta estar ligado à Internet.\n"
-"Tente reconfigurar a sua ligação."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Configuração da Ligação"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Por favor preencha ou verifique os campos abaixo"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ da Placa"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Memória da Placa (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "IO da Placa"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "IO_O da Placa"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "IO_1 da Placa"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "O seu número de telefone pessoal"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Nome do provedor (ex: provedor.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Número do telefone do provedor"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "Provider dns 1 (opcional)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "Provider dns 2 (opcional)"
-
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "Escolha o seu teclado"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Modo de marcação"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-#, fuzzy
-msgid "Connection speed"
-msgstr "Tipo de Ligação:"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Tipo de Ligação:"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Nome do utilizador da conta"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Senha da conta"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Partição extendida não é suportada nesta plataforma"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Tem um buraco na sua tabela de partições e eu não a posso usar.\n"
-"A única solução é mover as suas partições primárias para ter o buraco "
-"próximo das partições extendidas"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "A restauração pelo ficheiro %s falhou: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Ficheiro de cópia de segurança defeituoso"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Erro ao escrever no ficheiro %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Algo mau está acontecer no seu drive. \n"
-"O teste que verifica a integridade dos dados falhou. \n"
-"Isso significa que escrever algo no disco resultará em lixo aleatório."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "obrigatório"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "importante"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "muito bom"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bom"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "talvez"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Impressora local"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Impressora remota"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Servidor lpd remoto"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Impressora da rede (socket)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Servidor de Impressão"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Dispositivo de Impressão URI"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(módulo %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Seleccionar Ligação da Impressora"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Como está a impressora ligada?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"Com um servidor CUPS remoto, não tem que configurar\n"
-"nenhuma impressora aqui; elas serão detectadas automaticamente.\n"
-"Se tiver dúvidas, seleccione \"Servidor CUPS remoto\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-#, fuzzy
-msgid "None"
-msgstr "Pronto"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Escolha o utilizador por omissão :"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Fechar"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "O endereço IP deve estar no formato 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "O número da porta deve ser numérico"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "IP do servidor CUPS"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Porta"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Configuração do Estilo de Arranque"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "A detectar dispositivos..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Testar portas"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Uma impressora, modelo \"%s\", foi detectado no(a) "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Dispositivo de Impressora Local"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"A que dispositivo a sua impressora está ligada \n"
-"(note que /dev/lp0 é equivalente a LPT1:)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Dispositivo da Impressora"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Opções da impressora lpd Remota"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Para usar uma fila de impressão lpd remota, precisa indicar\n"
-"o nome do anfitrião e o servidor de impressão e o nome da\n"
-"fila naquele servidor."
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nome do anfitrião remoto"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:320
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Nome do anfitrião remoto"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nome do anfitrião remoto"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opções de Impressão SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Para imprimir numa impressora SMB, precisa indicar o nome do \n"
-"anfitrião SMB (Nota! Ele pode ser diferente do anfitrião TCP/IP!) e \n"
-"possivelmente o endereço IP do servidor de impressão, como também\n"
-" o nome de partilha para a impressora que deseja aceder e qualquer \n"
-"informação aplicável sobre nome de utilizador, senha e grupo de trabalho."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "Anfitrião servidor SMB"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "IP do servidor SMB"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Nome de partilha"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Grupo de trabalho"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "Opções de Impressão NetWare"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Para imprimir numa impressora NetWare, precisa indicar o\n"
-"nome do servidor de impressão NetWare (Nota: ele pode ser diferente\n"
-"do servidor TCP/IP!) como também o nome da fila de impressão para a "
-"impressora\n"
-"que deseja aceder como qualquer nome de utilizador e senha aplicável."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Servidor de Impressão"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Nome da Fila de Impressão"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Opções da Impressora 'Socket'"
-
-#: ../../printerdrake.pm_.c:528
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Para imprimir numa impressora 'socket', precisa indicar o \n"
-"nome do servidor da impressora e a número da porta (opcional)."
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "Nome do Servidor da impressora"
-
-#: ../../printerdrake.pm_.c:537
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Nome do Servidor da impressora"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Dispositivo de Impressão URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Nome da impressora"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Descrição"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Localização"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:793
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Ligação da Impressora"
-
-#: ../../printerdrake.pm_.c:794
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Qual tipo de impressora que tem?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Configuração da Internet"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Configuração da Internet"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Quer testar a impressão?"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "Testar portas"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-#, fuzzy
-msgid "No test pages"
-msgstr "Sim, imprimir ambas as páginas de teste"
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "Impressora"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "Padrão"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "A imprimir página(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "A imprimir página(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "A imprimir página(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"A(s) página(s) foi(foram) enviada(s) para o demónio de impressão.\n"
-"Pode demorar algum tempo antes da impressão começar.\n"
-"Estado da impressão:\n"
-"%s\n"
-"\n"
-"Está a funcionar correctamente?"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"A(s) página(s) foi(foram) enviada(s) para o demónio de impressão.\n"
-"Pode demorar algum tempo antes da impressão começar.\n"
-"Está a funcionar correctamente?"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Nenhuma impressora"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "A desligar a rede"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "Opções da impressora"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Configuração da Internet"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-#, fuzzy
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"O nome da impressora deve apenas conter letras, números e 'underscore' '_'"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "Nenhuma impressora"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "A iniciar a sua ligação..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Configurar rede"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor não configurado"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "A configurar a rede"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Alto"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranóico"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Seleccionar Ligação da Impressora"
-
-#: ../../printerdrake.pm_.c:1728
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Que sistema de impressão deseja usar?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configurar Impressora"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Opções da impressora"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:1845
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Deseja configurar uma impressora?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Modo Normal"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Por omissão)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Servidor CUPS remoto"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "Servidor CUPS remoto"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-#, fuzzy
-msgid "Add printer"
-msgstr "Nenhuma impressora"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Quer testar a configuração?"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Configuração da Internet"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Ligação à Internet"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Ligação da Impressora"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "A imprimir página(s) de teste..."
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Quer testar a impressão?"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Configuração de Proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Bem vindo ao utilitário de configuração de proxy.\n"
-"\n"
-"Aqui, poderá definir as proxies http e ftp\n"
-"com ou sem utilizador e palavra-passe\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Por favor preencha as informações da proxy para http\n"
-"Deixe em branco se não deseja uma proxy para http"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "porta"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "O Url deve começar com 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "A parte da porta deve ser numérica"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Por favor preencha as informações da proxy para ftp\n"
-"Deixe em branco se não deseja uma proxy para ftp"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "O Url deve começar com 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Por favor introduza o utilizador e palavra-passe para proxy, se existir.\n"
-"Deixe em branco se não desejar utilizador/palavra-passe"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "utilizador"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "palavra-passe"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "reintroduza a palavra-passe"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "As palavras-passe não coincidem. Tente novamente!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Não é possível adicionar partição ao RAID _formatado_ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Não possível escrever o ficheiro %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid falhou"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid falhou (talvez as raidtools estejam em falta?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Sem partições suficientes para RAID nível %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Inicia o sistema de som ALSA (Advanced Linux Sound Architecture) "
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, um calendarizador de comando periódicos"
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd é usado para monitorizar o estado da bateria e registando-o via "
-"syslog.\n"
-"Pode ser usado também para desligar a máquina quando a bateria estiver fraca."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Executa comandos agendados pelo comando at na hora especificada quando\n"
-"at foi executado, e executa comandos em grupo de comandos quando o uso de "
-"memória estiver suficientemente baixo."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron é um programa UNIX padrão que executa programas especificados pelo\n"
-"utilizador em horas marcadas. vixie cron adiciona várias características ao "
-"UNIX\n"
-"cron básico, incluindo melhor segurança e melhores opções de configuração."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM adiciona suporte de rato a aplicações Linux em modo de texto\n"
-"tal como o Midnight Commander. Permite também copiar e colar utilizando\n"
-"o rato e inclui suporte para menus pop-up na consola."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"O HardDrake sonda o hardware, e opcionalmente\n"
-"configura hardware novo ou alterado."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache é um servidor World Wide Web. Ele é usado para servir ficheiros\n"
-"HTML e CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"O demónio (daemon) Internet superserver(normalmente chamado inetd) inicia\n"
-"uma variedade de outros serviços de Internet quando necessário. É "
-"responsável\n"
-"pela inicialização de vários serviços, incluindo telnet, ftp, rsh e rlogin. "
-"Desactivando o inetd, todos os serviços pelos quais é responsável \n"
-"também são desactivados."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Inicie o filtro de pacotes para Linux kernel 2.2, para criar \n"
-"uma firewall afim de proteger a sua máquina de ataques de rede."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Este pacote carrega o mapa de teclado seleccionado como\n"
-"definido em /etc/sysconfig/keyboard. Isto pode ser seleccionado usando o\n"
-"utilitário kbdconfig. Deve deixar isto activado para a maioria da máquinas."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Regeneração automática do 'kernel header' em /boot \n"
-"para /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Detecção e configuração automática de hardware no arranque."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"O Linuxconf irá por vezes executar várias tarefas\n"
-"no arranque para manter a configuração do sistema."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd é o demónio de impressão obrigatório para o lpr funcionar "
-"correctamente.\n"
-"Ele é basicamente um servidor que controla os trabalhos para a(s) impressora"
-"(s)."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, usado para criar um servidor de alta\n"
-"desempenho e disponibilidade."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) é um Servidor de Nome de Domínio (DNS) que é usado para\n"
-"transformar nomes de servidores em endereços IP."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monta e desmonta todos os pontos de montagem do Network File\n"
-"System (NFS), SMB (Gestor de Rede/Windows) e NCP (NetWare)."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/Desactiva todas os interfaces de rede configurados para iniciar\n"
-"no arranque."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS é um protocolo popular usado na partilha de ficheiros através\n"
-"de redes TCP/IP. Esse serviço oferece a funcionalidade do servidor NFS, que "
-"é configurado através do ficheiro /etc/exports."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS é um protocolo popular usado na partilha de ficheiros através de redes\n"
-"TCP/IP. Esse serviço oferece a funcionalidade de bloquear ficheiros NFS."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automaticamente ligar o teclado numérico na consola\n"
-"e XFree no arranque."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Suporte a OKI 4w e 'winprinters' compatíveis."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Suporte PCMCIA é utilizado normalmente para suportar coisas como\n"
-"ethernet ou modems em portáteis. Ele não será iniciado a não ser que seja "
-"configurado de maneira que\n"
-"seguro estar instalado em máquinas que não precisem dele."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"O portmapper gere ligações RPC, que são usadas por\n"
-"protocolos como NFS ou NIS. O servidor portmap tem que estar a correr nas "
-"máquinas\n"
-"que actuarão como servidores para os protocolos que utilizam o mecanismo RPC."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix é um Agente de Transporte de Correio, um programa\n"
-"que move mensagens de correio de uma máquina para outra."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Guarda e restaura o 'entropy pool' do sistema para melhor qualidade\n"
-"na geração aleatória de números."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Designa dispositivos 'raw' a dispositivos de bloco (como \n"
-"partições de disco duro), para o uso de aplicações como Oracle"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"O demónio routed permite a actualização automática da tabela IP Router\n"
-"através do protocolo RIP. Enquanto o RIP é usado largamente em pequenas\n"
-"redes, protocolos de 'routing' mais complexos são necessários em redes mais "
-"complexas."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"O protocolo rstat permite que utilizadores da rede recebam\n"
-"informações sobre a performance de qualquer máquina naquela rede."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"O protocolo rusers permite que os utilizadores de uma rede identifiquem\n"
-"quem está registado (logged) noutras máquinas que respondam."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"O protocolo rwho permite que utilizadores remotos obtenham uma lista de "
-"todos os\n"
-"utilizadores registados (logged) numa máquina a correr o demónio rwho "
-"(similar ao finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Iniciar o sistema de som na sua máquina"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog é uma capacidade que muitos demónios usam para registar mensagens\n"
-"em vários ficheiros de registo. É uma boa ideia correr sempre o syslog."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Carrega os driver para os seus dispositivos usb."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Inicia o Servidor X Font (essencial para o XFree funcionar)"
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Escolha quais os serviços que devem ser inicializados automaticamente na "
-"altura do arranque"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "Impressora"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "Modo do sistema"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Opções da impressora lpd Remota"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Base de Dados"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Serviços"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "a correr"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "parado"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Serviços e demónios"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Não há informação adicional\n"
-"sobre este serviço, lamento."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ao arrancar"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "A instalar pacote %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Eu não consigo ler sua tabela de partições, é demasiado defeituosa\n"
-"para mim. Tentarei continuar limpando as partições defeituosas"
-
-#: ../../standalone/drakautoinst_.c:44
-#, fuzzy
-msgid "Error!"
-msgstr "Erro"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Configuração pós-instalação"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Configuração do Estilo de Arranque"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Parabéns!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Partilha da Ligação à Internet"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "A Partilha da Ligação à Internet está activa"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configuração da Partilha da Ligação à Internet já foi feita.\n"
-"Está neste momento activa.\n"
-"\n"
-"O que deseja fazer?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "desactivar"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "libertar"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "reconfigurar"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "A desactivar servidores..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Partilha da Ligação à Internet está agora desactivada."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "A Partilha da Ligação à Internet está actualmente desactivada"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configuração da Partilha da Ligação à Internet já foi feita.\n"
-"Está neste momento desactivada.\n"
-"\n"
-"O que deseja fazer?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "activar"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "A activar servidores..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Partilha da Ligação à Internet está agora activa."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Estás prestes a configurar o seu computador para partilhar a Ligação à "
-"Internet.\n"
-"Com esta capacidade, outros computadores na sua rede local poderão usar a "
-"ligação à Internet deste computador\n"
-"\n"
-"Nota: necessita de um Adaptador de Rede dedicado para configurar uma Rede de "
-"Área Local (LAN)."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (a usar módulo %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Nenhum adaptador de rede no seu sistema!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nenhum adaptador de rede foi encontrado no seu sistema. Por favor execute a "
-"ferramenta de configuração de hardware."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Interface de rede"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Existe apenas um adaptador de rede configurado no seu sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Estou prestes a configurar a sua Rede de Área Local com esse adaptador."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Por favor escolha qual adaptador de rede que estará ligado a sua Rede de "
-"Área Local."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr "Aviso, o adaptador de rede já está configurado. Vou reconfigurá-lo."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potencial conflito de endereços de LAN encontrado na configuração actual de %"
-"s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Configuração de firewall detectada!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Aviso! Uma configuração de firewall existente foi detectada. Pode necessitar "
-"de configuração manual depois da instalação."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "A configurar..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "A configurar scripts, a instalar software, iniciando servidores..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemas a instalar o pacote %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Tudo foi configurado.\n"
-"Pode agora partilhar a sua Ligação à Internet com outros computadores na sua "
-"Rede Local, usando a configuração de rede automática (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "A configuração já foi feita, mas está actualmente desactivada."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "A configuração já foi feita, e está actualmente activa."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Nenhuma Partilha da Ligação à Internet foi alguma vez configurada."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Configuração da Partilha de Ligação à Internet"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Bem-Vindo ao utilitário de Partilha da Ligação à Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Clique em Configurar para iniciar o assistente de configuração."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuração de Rede (%d adaptadores)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Perfil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Eliminar perfil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Perfil a eliminar:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Novo perfil..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Hostname: "
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Acesso Internet"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Tipo:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Interface:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Estado:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Ligado"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Não ligado"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Ligar..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Desligar..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "A iniciar a sua ligação..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "A fechar a sua ligação..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"A ligação não está fechada.\n"
-"Tente fazê-lo manualmente executando\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"como root."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "O sistema está agora desligado."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Configurar Acesso à Internet..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "Configuração LAN"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protocolo"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "State"
-msgstr "Estado:"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Configurar Rede de Área Local."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Aplicar"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Por favor aguarde... A aplicar a configuração"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Não tem nenhum interface configurado.\n"
-"Para configurar primeiro clique em 'Configurar'"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "Configuração LAN"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Protocolo de Arranque"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Iniciado ao arrancar"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "activate now"
-msgstr "Activo"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "desactivate now"
-msgstr "Activo"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Não tem nenhuma ligação à Internet.\n"
-"Crie uma clicando em 'Configurar'"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Configuração da Ligação à Internet"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Configuração da Ligação à Internet"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Tipo de Ligação:"
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parâmetros"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Placa Ethernet"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP Client"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Bem-vindo à Crackers"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Pobre"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranóico"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Este nível deve ser usado com cuidado. Ele torna o seu sistema mais fácil \n"
-"de usar, mas muito sensível: não deve ser usado numa máquina \n"
-"ligada a outras ou à Internet. Não existe acesso por senha."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"As senhas agora estão activadas, mas o uso como computador de rede ainda não "
-"é recomendado."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Alguns melhoramentos para este nível de segurança, o principal é \n"
-"que existem mais avisos e testes de segurança."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Esta é a segurança padrão recomendada para um computador que será usado\n"
-"para se ligar à Internet como um cliente. Agora existem verificações de "
-"segurança. "
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Com este nível de segurança, o uso deste sistema como um servidor tornou-se "
-"possível.\n"
-"A segurança agora está alta o suficiente para usar o sistema como um\n"
-"servidor que aceita ligações de muitos clientes. "
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Nós definimos características nível 4, mas agora o sistema está .\n"
-"totalmente fechado. As características de segurança estão no máximo."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "Opções do nível de segurança"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Escolha as opções para o servidor"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Opções do nível de segurança"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centro de Controlo"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Escolha a ferramenta que deseja usar"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uso: keyboarddrake [--expert] [teclado]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Deseja que o BackSpace funcione como Delete na consola?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Troque de  CD-Rom"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Por favor insira o CD-Rom de Instalação no seu drive e prima OK quando "
-"estiver pronto.\n"
-"Se não o tiver, prima Cancelar para evitar a actualização directa."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Não é possível iniciar actualização directa!!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "nenhum usb_série encontrado\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Deseja emulação de 3 botões?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Configuração de firewalling"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Configuração de firewalling"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"Já configurou a firewalll.\n"
-"Clique em Configurar para alterar ou remover a firewall"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"Clique em Configurar para configurar uma firewall padrão"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Escolha a seu idioma"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Seleccione a classe da instalação"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detecção de discos rígidos"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configurar rato"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Escolha o seu teclado"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Segurança"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Configurar sistemas de ficheiros"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatar partições"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Escolha os pacotes a serem instalados"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalar sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Adicionar um utilizador"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configurar rede"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configurar serviços"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Criar um disco de arranque"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Instalar carregador de arranque"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configurar X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Sair da instalação"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Configurador do tinyfirewall\n"
-"\n"
-"Configura uma firewall pessoal para esta máquina Linux Mandrake.\n"
-"Para uma firewall poderosa e dedicada, por favor procure a \n"
-"distribuição especializada MandrakeSecurity Firewall"
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Está a correr um servidor de nomes nesta máquina? Se não definiu \n"
-"um para enviar informações de IP e zona a toda a Internet por favor \n"
-"responda não.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Deseja autorizar ligações Secure Shell (ssh) recebidas do exterior? \n"
-"Isto é um substituto de telnet que pode utilizar para efectuar o login.\n"
-"Se estiver a utilizar telnet agora, deve mudar para ssh. telnet não é \n"
-"encriptado -- possibilitando o roubo da sua palavra-passe se o usar\n"
-"ssh é encriptado e não autoriza este 'eavesdropping'."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Deseja autorizar ligações telnet recebidas do exterior?\n"
-"Isto é muito inseguro, como já explicamos. Nós recomendamos\n"
-"vivamente responder Não aqui e usar ssh em vez de telnet.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Está a correr um servidor FTP aqui que necessita que esteja acessível na\n"
-"Internet? Se estiver, recomendamos que apenas o utilize para transferências\n"
-"Anónimas. Quaisquer palavras-passe enviadas por FTP podem ser roubadas,\n"
-" uma vez que o FTP também não utiliza encriptação para palavras-passe.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Está a correr um servidor de correio aqui? Se está a enviar a si \n"
-"mensagens através do pine, mutt ou outro cliente de correio base-\n"
-"ado em texto provavelmente está. De outra forma deveria remover \n"
-"o firewall para isto.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Esta a correr um servidor POP OU IMAP aqui? Isto seria\n"
-"usado para albergar contas de correio não baseadas na web\n"
-"para pessoas via esta máquina.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Aparentemente está a correr um kernel 2.2.  Se o seu IP de \n"
-"Rede é automaticamente definido por um computador na sua \n"
-"casa ou escritório (dinamicamente atribuído), necessitamos \n"
-"permitir isto. É este o caso?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"O seu computador está a sincronizar a hora com outro computador?\n"
-"Isto é usado por maioritariamente por organizações Unix/Linux médias-\n"
-"grandes para sincronizar a hora para registos e assim. Se não faz parte \n"
-"de um grande escritório e nunca ouviu falar disto, provavelmente não \n"
-"estará."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Configuração completa.  Posso escrever estas mudanças no disco?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Não é possível abrir %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Não é possível abrir %s para escrita: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Computador de Rede (cliente)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Servidor NFS, Servidor SMB, Servidor Proxy, Servidor SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Escritório"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Estação de Trabalho Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Ferramentas para o seu Palm Pilot ou Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Estação de Trabalho"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Servidor de Nome do Domínio e Informação de Rede"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programas de Escritório: texto (kword, abiword), folhas de cálculo (kspread, "
-"gnumeric), visualizadores pdf, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Ferramentas para audio: reprodutores mp3 ou midi, misturadores, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Livros e Howto's sobre o Linux e Software Livre"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Estação de Trabalho KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimédia - Vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Conjunto de ferramentas para correio electrónico, news, web, transferência "
-"de ficheiros e chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Base de Dados"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Servidor de Bases de Dados PostgreSQL ou MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Ferramentas para facilitar a configuração do seu computador"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimédia - Som"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilitários"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentação"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Ferramentas de terminal"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix servidor de correio, Inn servidor de news "
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Estação de Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Estação Multimédia"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configuração"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Mais Ambientes de Trabalho Gráficos (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"The K Desktop Environment, o ambiente gráfico básico com a colecção de "
-"ferramentas que o acompanham"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ambiente Gráfico"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Desenvolvimento"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache e Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Ferramentas para criar e gravar CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Estação de Trabalho de Escritório"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Aplicações para gráficos como o The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-"C e C++ bibliotecas de desenvolvimento, programas e ficheiros 'include'"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Computador de Rede Servidor"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Estação de Jogo"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Reprodutores de Vídeo e editores"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimédia - Gráficos"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programas de divertimento: arcade, tabuleiros, estratégia, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Conjunto de ferramentas para ler e enviar correio electrónico e news (pine, "
-"mutt, tin...) e para navegar na Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arquivo, emuladores, monitorização"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanças Pessoais"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Um ambiente gráfico com um conjunto de aplicações e ferramentas de ambiente "
-"de trabalho fáceis de usar"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clientes para diferentes protocolos incluindo ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Gateway Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Aplicações de som e vídeo reprodução/edição"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Outros Ambientes de Trabalho Gráficos"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editores, linhas de comando, ferramentas de ficheiro, terminais"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programas para gerir as suas finanças, como o gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Jogos"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Gestão de Informações Pessoais"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimédia - Gravação de CDs"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Estação de Trabalho Científica"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "não possível abrir /etc/sysconfig/autologin para leitura: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Deseja reiniciar a rede"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Concorda?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Estou pronto a reiniciar o dispositivo de rede:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Estou pronto para reiniciar o dispositivo de rede %s. Concorda?"
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Aqui estão as seguintes filas de impressão.\n"
-#~ "Pode adicionar mais ou modificar as existentes."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Tipo de Ligação:"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Escolha o utilizador por omissão :"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Teste aqui o rato."
-
-#~ msgid "What type of printer do you have?"
-#~ msgstr "Qual tipo de impressora que tem?"
-
-#~ msgid "Do you want to test printing?"
-#~ msgstr "Quer testar a impressão?"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Agora pode testar seu rato. Use os botões e a roda para\n"
-#~ "verificar se as configurações estão correctas. Se não estiverem, pode "
-#~ "clicar\n"
-#~ "em \"Cancelar\" e escolher outro driver."
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Para ter um sistema mais seguro, deve escolher \"Usar ficheiro shadow\"\n"
-#~ "e \"Usar senhas MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Se a sua rede usa NIS, seleccione \"Usar NIS\". Se não sabe, pergunte\n"
-#~ "ao seu administrador de rede."
-
-#~ msgid "yellow pages"
-#~ msgstr "páginas amarelas"
-
-#~ msgid "Light configuration"
-#~ msgstr "Configuração leve"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1 do provedor"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2 do provedor"
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Ligação DSL (ou ADSL)"
-
-#~ msgid "Choose"
-#~ msgstr "Escolha"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Você pode directamente especificar o URI para aceder à impressora com CUPS"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Sim, imprimir página de teste ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Sim, imprimir página de teste PostScript"
-
-#~ msgid "Yes, print both test pages"
-#~ msgstr "Sim, imprimir ambas as páginas de teste"
-
-#~ msgid "Paper Size"
-#~ msgstr "Tamanho do Papel"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Ejectar página após trabalho de impressão?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Opções do driver Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Opções da profundidade de cor"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Imprimir texto como PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Corrigir texto com stair-stepping?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Número de páginas por páginas de saída"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Margem Direita/Esquerda em pontos (1/72 de polegada)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Margem Superior/Inferior em pontos (1/72 de polegada)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Opções extras de GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Opções extras de Texto"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Inverter a ordem das páginas"
-
-#~ msgid "CUPS starting"
-#~ msgstr "A iniciar o CUPS"
-
-#~ msgid "Reading CUPS drivers database..."
-#~ msgstr "Lendo banco de dados de drivers do CUPS"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Seleccionar ligação de impressora remota"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected.\n"
-#~ "In case of doubt, select \"Remote CUPS server\"."
-#~ msgstr ""
-#~ "Com um servidor CUPS remoto, não tem que configurar\n"
-#~ "nenhuma impressora aqui; elas serão detectadas automaticamente.\n"
-#~ "Se tiver dúvidas, seleccione \"Servidor CUPS remoto\"."
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Cada impressora precisa de um nome (por exemplo\n"
-#~ "lp). Outros parâmetros, tal como a descrição da impressora ou sua\n"
-#~ "localização podem ser definidas. Qual nome que deve ser usado para \n"
-#~ " esta impressora e como a impressora está ligada?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Cada fila de impressão (à qual as impressões são dirigidas) precisa\n"
-#~ "de um nome (normalmente lp) e de uma directoria de spool associada.\n"
-#~ "Qual o nome e a directoria que devem ser utilizados para esta fila?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nome da fila de impressão"
-
-#~ msgid "Spool directory"
-#~ msgstr "Directoria de spool"
diff --git a/perl-install/share/po/pt_BR.po b/perl-install/share/po/pt_BR.po
deleted file mode 100644
index f580c552f..000000000
--- a/perl-install/share/po/pt_BR.po
+++ /dev/null
@@ -1,10181 +0,0 @@
-# DRAKX PT_BR PO FILE.
-# Copyright (C) 2000 MandrakeSoft
-# Andrei Bosco Bezerra Torres <andreibt@uol.com.br>, 1999-2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-04-27 21:00GMT-0300\n"
-"Last-Translator: Andrei Bosco Bezerra Torres <andreibt@uol.com.br>\n"
-"Language-Team: Português Brasileiro <andreibt@uol.com.br>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.6\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Configurar todas as cabeças independentemente"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Usar extensão Xinerama"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configurar apenas placa \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Configuração multi-cabeça"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Seu sistema suporta configuração de cabeça múltipla.\n"
-"O que você quer fazer?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Placa Gráfica"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Selecione uma placa gráfica"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Escolha um servidor X"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "Servidor  X"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Qual configuração do XFree você quer ter?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Seu placa suporta aceleração hardware 3D mas apenas com o XFree %s.\n"
-"Sua placa é suportada pelo XFree %s que pode ter melhor suporte 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Sua placa suporta aceleração hardware 3D com o XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s com aceleração hardware 3D"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Seu placa suporta aceleração hardware 3D com o XFree %s,\n"
-"NOTE QUE O SUPORTE É EXPERIMENTAL E PODE TRAVAR O SEU COMPUTADOR."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s com aceleração hardware 3D EXPERIMENTAL"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Seu placa suporta aceleração hardware 3D mas apenas com o XFree %s,\n"
-"NOTE QUE O SUPORTE É EXPERIMENTAL E PODE TRAVAR O SEU COMPUTADOR.\n"
-"Sua placa é suportada pelo XFree %s que pode ter melhor suporte 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "Configuração do XFree"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Selecione o tamanho da memória de sua placa gráfica"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Escolha as opções do server"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Escolha um monitor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dois parâmetros críticos são a taxa de atualização vertical, que é a taxa\n"
-"em que toda a tela é atualizada, e principalmente a taxa de sincronização\n"
-"horizontal, que é a taxa em que scanlines são mostradas.\n"
-"\n"
-"É MUITO IMPORTANTE que você não especifique um tipo de monitor com taxa de "
-"atualizaçã\n"
-"que é muito além das capacidades do seu monitor: você pode danificar seu "
-"monitor.\n"
-" Se tiver dúvida, escolha características conservadoras."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Taxa de atualização horizontal"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Taxa de atualização vertical"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Monitor não configurado"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Placa gráfica ainda não configurado"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Resoluções ainda não escolhidas"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Você quer testar a configuração?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Atenção: testar essa placa gráfica pode travar o seu computador"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Testar configuração"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"tente mudar alguns parâmetros"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Ocorreu um erro:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Saindo em %d segundos"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "É essa a configuração correta?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ocorreu um erro, tente mudar alguns parâmetros"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Resolução"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Escolha a resolução e número de cores"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Placa Gráfica: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Modo Avançado"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Mostrar tudo"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Resoluções"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Estilo do teclado: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo do Mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo do mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Sincronização Horizontal do Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Atualização Vertical do Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Placa Gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Placa Gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memória gráfica: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Número de cores: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolução: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Server XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Driver XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Preparando configuração X-Window"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "O que você quer fazer?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Mudar Monitor"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Mudar Placa Gráfica"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Mudar opções do Server"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Mudar Resolução"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Mostrar informação"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Testar de novo"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Sair"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Manter alterações?\n"
-"A configuração atual é:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Favor relogar em %s para ativar as mudanças"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"Favor fazer um log out (sair) e então usar as teclas Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X ao iniciar"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Eu posso fazer seu computador automaticamento iniciar no X após a\n"
-"a inicialização. Você gostaria de iniciar o X quando reiniciar?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 cores (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil cores (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil cores (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milhões de cores (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 bilhões de cores (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB ou mais"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA Padrão, 640x480 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatível com 8514, 1024x768 a 87 Hz entrelaçado (sem 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz entrelaçado, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA Extendido, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA Não-entrelaçado, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA de Alta Frequência, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequência que pode fazer 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequência que pode fazer 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequência que pode fazer 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor que pode fazer 1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor que pode fazer 1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Primeiro setor da partição de boot"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Primeiro setor do drive (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "Instalação do SILO"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Onde você quer instalar o gerenciador de inicialização?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "Instalação do LILO/grub"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO com menu de texto"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO com menu gráfico"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Inicialização pelo DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Principais opções do gerenciador de inicialização"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Gerenciador de inicialização a ser usado"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Instalação do gerenciador de inicialização"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Dispositivo de boot"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (não funciona em BIOS antigas)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Compacto"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "Compacto"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Modo de Vídeo"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Tempo antes de entrar na imagem padrão"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Senha"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Senha (de novo)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Restringir opções da linha de comando"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "restrito"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Limpar /tmp a cada inicialização"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Especifique o tamanho da RAM se necessário (%d MB encontrados)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Permitir vários perfis"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Dar o tamanha da RAM em Mb"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opção ``Restringir opções da linha de comando'' não tem uso sem senha"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Favor tentar novamente"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "As senhas não conferem"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Mensagem Inicial"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Delay do firmware aberto"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Tempo de espera do boot do kernel"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Permitir CD Boot?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Permitir OF Boot?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "SO padrão?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Aqui estão as entradas diferentes.\n"
-"Você pode adicionar mais ou modificar as existentes."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Adicionar"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Pronto"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Modificar"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Qual tipo de entrada você quer adicionar"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Outros SO (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Outros SO (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Outros SO (windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Image"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Read-write"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Table"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Unsafe"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Rótulo"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Default"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Tamanho do Initrd"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "Sem vídeo"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Remover entrada"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Não é permitido rótulo vazio"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Esse rótulo já está sendo utilizado"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Interfaces %s %s encontradas"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Você tem alguma outra?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Você tem alguma interface %s?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Não"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Sim"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Ver informação do hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalando driver para placa %s %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(módulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Qual driver %s eu deveria tentar?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Em alguns casos, o driver %s precisa de informações extra para funcionar\n"
-"corretamente, mas ele normalmente funciona bem sem essas informações. Você\n"
-"gostaria de especificar opções extras ou deixar o driver localizar na sua\n"
-"máquina as informações que ele precisa? Ocasionalmente, isso poderá travar\n"
-"o computador, mas não deve causar nenhum dano."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Auto detectar"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Especificar opções"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Agora você poder prover as opções para o módulo %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Agora você pode prover as opções para o módulo %s.\n"
-"As opções estão no formato ``nome=valor nome2=valor2 ...''\n"
-"Para instância, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Opções do módulo:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Falha carregando módulo %s.\n"
-"Você quer tentar novamente com outros parâmentros?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(já adicionado %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Essa senha é muito simples"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Favor dar um nome de usuário"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"O nome do usuário deve conter apenas letras minúsculas, números `-' e `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Esse usuário já foi adicionado"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Adicionar usuário"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Entre com o usuário\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Aceitar usuário"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Nome real"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Nome do usuário"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Ícone"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Eu posso configurar o seu computador para automaticamente logar um usuário.\n"
-"Se você não quiser utilisar esta função, clique em \"Cancelar\"."
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Escolha o usuário:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Escolha o gerenciador de janelas para ele:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Favor escolher o idioma a ser utilizado."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Você pode escolher outros idiomas que estarão disponíveis após a instalação"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Tudo"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Bem-vindo ao %s, o selecionador de sistema operacional!\n"
-"\n"
-"Escolha um sistema operacional da lista acima ou\n"
-"aguarde %d segundos para entrar no sistema padrao.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bem-vindo ao GRUB o selecionador de sistema operacional!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use as teclas %c e %c para selecionar a entrada que quiser."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pressione entrar para entrar no SO selecionado, 'e' para editar os"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "comandos antes da inicializacao, ou 'c' para linha de comando."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-"A inicializacao da entrada selecionada ocorrera automaticamente em %d "
-"segundos."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "sem espaco suficiente em /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Menu Iniciar"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Onde você quer instalar o gerenciador de inicialização?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ajuda ainda não implementada.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuração do estilo de inicialização"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Arquivos"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Arquivo/Sai_r"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>R"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Categorizamento NewStyle de Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor NewStyle"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor Tradicional"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor Gtk+ Tradicional"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Executar Aurora na inicialização"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Modo lilo/grub"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Você  está utilizando o %s como gerenciador de inicialização.\n"
-"Clique em Configurar para abrir o auxiliar de configuração."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Configurar"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Modo de inicialização"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Modo do sistema"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Executar o sistema X-Window na inicialização"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Não, eu não quero autologin"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Sim, eu quero autologin com esse (usuário, desktop)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "não foi possívek abrir /etc/inittb para leitura: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "A Instalação do LILO falhou. Ocorreram os seguintes erros:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutos"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d segundos"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Favor primeiro fazer um backup de seus dados"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Ler com atenção!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Se você planejar usar aboot, lembre-se de deixar espaço livre (2048 setores "
-"é suficiente)\n"
-"no início do disco"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Erro"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Ajudante"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Novo"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "Fila remota"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Ponto de Montagem"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Opções"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Desmontar"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Montar"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Escolher ação"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Você tem uma grande partição fat\n"
-"(normalmente utilizada pelo MicroSoft Dos/Windows.)\n"
-"Eu sugiro você a primeiro redimensionar a partição\n"
-"(clique nela, depois clique em \"Redimensinar\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Favor clicar em uma partição"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Favor clicar em uma partição"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Favor clicar em uma partição"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Detalhes"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "falhou ao montar"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Vazio"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Outro"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Tipos de sistema de arquivo:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Criar"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Use ``%s'' ao invés"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Deletar"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Use ``Desmontar'' primeiro"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Após alterar o tipo da partição %s, todos os dados desta partição serão "
-"perdidos"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Onde você quer montar o dispositivo %s?"
-
-#: ../../diskdrake.pm_.c:500
-#, fuzzy
-msgid "Mount options"
-msgstr "Opções do módulo:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:525
-#, fuzzy
-msgid "Removable media"
-msgstr "Auto-montagem da mídia removível"
-
-#: ../../diskdrake.pm_.c:532
-#, fuzzy
-msgid "Change type"
-msgstr "Mudar tipo de partição"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Qual sistema de arquivos você quer?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "servidor"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Escolher ação"
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Criar uma nova partição"
-
-#: ../../diskdrake_interactive.pm_.c:188
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Mudar para modo expert"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Mudar para modo normal"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Desfazer"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Continuar mesmo assim?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Sair sem salvar"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Sair sem gravar na tabela de partição?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Você quer testar a configuração?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Auto alocar"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Limpar tudo"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Mais"
-
-#: ../../diskdrake_interactive.pm_.c:250
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Detecção de discos rigidos"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Sem espaço livre suficiente para auto-alocação"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Todas as partições primárias estão sendo usadas"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Eu não posso adicionar mais nenhuma partição"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Para ter mais partições, favor deletar uma para poder criar uma partição "
-"extendida"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Gravar tabela de partição"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Recuperar tabela de partição"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Recuperar tabela de partição"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Recuperar tabela de partição"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Auto-montagem da mídia removível"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Selecione arquivo"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"O backup da tabela de partição não tem o mesmo tamanho\n"
-"Ainda continuar?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Aviso"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Insira um disquete no drive\n"
-"Todos os dados no disquete serão perdidos"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Tentando resgatar tabela de partição"
-
-#: ../../diskdrake_interactive.pm_.c:340
-#, fuzzy
-msgid "Detailed information"
-msgstr "Mostrar informação"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Redimensionar"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Mover"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formatar"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Ativo"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Adicionar ao RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Adicionar ao LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Remover do RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Remover do LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Modificar RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Usar para loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Criar uma nova partição"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Setor inicial: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Tamanho em MB: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Tipo do Sistema de Arquivos: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Ponto de montagem: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Preferência: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatando arquivo loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Mudar tipo de partição"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Onde você quer montar o arquivo loopback %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Não posso desmacar o ponto de montagem enquanto a partição for\n"
-"usada para loop back. Remova o loopback primeiro"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Computando limites do sistema de arquivo fat"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Redimensionando"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Esta partição não é redimensionável"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Você deveria fazer backup de todos os dados desta partição"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Após redimensionar a particão %s, todos os dados da partição serão perdidos"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Escolha o novo tamanho"
-
-#: ../../diskdrake_interactive.pm_.c:591
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Tamanho em MB: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Qual disco você quer mover?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Setor"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Qual setor você quer mover?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Movendo"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Movendo partição..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Escolha um RAID existente para adicionar"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "novo"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Escolha um LVM existente para adicionar"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "Nome LVM?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Essa partição não pode ser usada para loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Nome do arquivo loopback: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nome real"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Arquivo já utilizado por outro loopback, escolha outro"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Arquivo já existe. Utilizá-lo?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "dispositivo"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "nível"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "tamanho do bloco"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Tenha cuidade: essa operação é perigosa."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Qual tipo de particionamento?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Desculpe, eu não aceitarei criar /boot tão distante do driver (em um cilindo "
-"> 1024).\n"
-"Ou você usa LILO e ele não funcionará, ou você não usará LILO e você não "
-"precisará de /boot"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"A partição que você selecionou para adicionar como root (/) é fisicamente "
-"localizada além\n"
-"do cilindro 1024 do disco rígido, e você não possui uma partição /boot.\n"
-"Se você quer usar o gerenciador de inicialização LILO, não esqueça "
-"deadicionar uma partição /boot."
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Você selecionou uma partição software RAID como root (/).\n"
-"O gerenciador de inicialização não consegue acessá-lo sem uma\n"
-"partição /boot. Então não esqueça de adicioná-la"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "A tabela de partição do drive %s está para ser gravada no disco!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Você precisará reiniciar antes que as modificações tenham efeito"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Após formatar a partição %s, todos os dados desta partição serão perdidos"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Formatando"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatando arquivo loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatando partição %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid falhou"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Sem espaço livre suficiente para alocar as novas partições"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Sem espaço livre suficiente para alocar as novas partições"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Resolução: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Dispositivo: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Letra do drive no DOS: %s (apena um palpite)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Tipo: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Nome: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Iniciar: setor: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Tamanho: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s setores"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Cilindro %d ao cilindro %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Formatado\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Não formatado\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Montado\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Arquivo(s) loopback: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partição de inicialização padrão\n"
-"    (para inicialização do MS-DOS, não para o lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Nível %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Tamanho do bloco %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discos RAID %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nome do arquivo loopback: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"É provável que está partição seja uma\n"
-"partição Driver, você provavelmente\n"
-"não deveria mexer nela.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Essa partição especial\n"
-"Bootstrap é para o\n"
-"boot-duplo do seu sistema.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Tamanho: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilindros, %s cabeças, %s setores\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Informação: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discos LVM %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo da tabela de partição: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "no barramento %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Opções: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatação de %s falhou"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Eu não sei como formatar %s no tipo %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "falhou ao montar"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "falhou ao montar: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "erro desmontando %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simples"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servidor"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Você não pode usar JFS em partições menores que 16MB"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Você não pode usar ReiserFS em partições menores que 32MB"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Pontos de montagem devem começar com uma /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Já existe uma partição no ponto de montagem %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Você não pode usar um Volume Lógivo LVM para o ponto de montagem %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Esse diretório deveria permanecer dentro do sistema de arquivo root"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Você precisa de um verdadeiro sistema de arquivo (ext2, reiserfs) para esse "
-"ponto de montagem\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Erro arbindo %s para gravação: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ocorreu um erro - nenhum dispositivo válido foi encontrado para criar novos "
-"sistema de arquivos. Favor checar seu hardware para a causa desse problema"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Você não tem nenhuma partição!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Acima estão listadas as partições Linux detectadas no\n"
-"seu disco rígido. Você pode manter as opções feitas pelo o ajudante, elas "
-"são\n"
-"boas para o uso diário. Se você quiser alterar essas opções, você deve ao\n"
-"menos definir uma partição (\"/\"). Não escolhe uma partição muito pequena "
-"ou você\n"
-"não será capaz de instalar software suficiente. Se você quiser guardar seus "
-"dados em\n"
-"uma partição separada, você precisa escolher uma \"/home\" (apenas possível "
-"se você\n"
-"tiver mais de uma partição Linux disponível).\n"
-"\n"
-"Nota: cada partição é listada da seguinte forma: \"Nome\", \"Capacidade\".\n"
-"\n"
-"\n"
-"\"Nome\" é codificado da seguinte maneira: \"tipo do disco rígido\", "
-"\"número\n"
-"do disco rígido\", \"número da partição\" (por exemplo, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tipo do disco rígido\" é \"hd\" se seu disco rígido for IDE e \"sd\"\n"
-"se ele for um disco rígido SCSI.\n"
-"\n"
-"\n"
-"\"Número do disco rígido\" é sempre uma letra depois de \"hd\" ou \"sd\".Com "
-"discos rígidos IDE:\n"
-"\n"
-"   * \"a\" significa \"disco rígido mestre na controladora IDE primária\",\n"
-"\n"
-"   * \"b\" significa \"disco rígido escravo na controladora IDE primária\",\n"
-"\n"
-"   * \"c\" significa \"disco rígido mestre na controladora IDE secundária"
-"\",\n"
-"\n"
-"   * \"d\" significa \"disco rígido escravo na controladora IDE secundária"
-"\",\n"
-"\n"
-"\n"
-"Com discos rígidos SCSI, um significa \"disco rígido primário\", um \"b\" "
-"significa \"disco rígido secundário\", etc..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Você agora pode escolher quais serviços você quer que iniciem na hora da "
-"inicialização.\n"
-"\n"
-"\n"
-"Quando você colocar o mouse sobre um item, um pequeno balão de ajuda\n"
-"aparecerá descrevendo a função do serviço.\n"
-"\n"
-"\n"
-"Tenha muito cuidado nesse passo, pois se você pretende usar sua máquina como "
-"um servidor:\n"
-"você provavelmente vai querer que serviços indesejados não sejam iniciados.\n"
-"Favor lembrar que vários serviços podem ser perigosos se foram habilitados "
-"em um\n"
-"servidor. Em geral, selecione apenas os serviços que você realmente precisa."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux gerencia o tempo em GMT (Tempo do Meridiano de Greenwich),\n"
-"e o converte de acordo com a zona de horário que você selecionou."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-#, fuzzy
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"A esse ponto, você precisa escolher onde você quer instalar o seu sistema\n"
-"Mandrake Linux no seu disco rígido. Se estiver vazio ou se um sistema\n"
-"operacional existente usa todo o espaço disponível, você terá que\n"
-"particioná-lo. Basicamente, particionar um disco rígido consiste em\n"
-"dividí-lo logicamente para criar espaço para o seu novo sistema Mandrake "
-"Linux.\n"
-"\n"
-"\n"
-"Como os efeitos de um processo de particionamento são normalmente\n"
-"irreversíveis, o particionamento pode ser intimidante e estressante se\n"
-"você for um usuário inexperiente.\n"
-"Esse ajudante simplifica o procceso. Antes de começar, favor consultar o "
-"manual\n"
-"e não se apressar.\n"
-"\n"
-"\n"
-"Você precisa de no mínimo duas partições. Uma para o sistema opercional em e "
-"a\n"
-"outra para a memória virtual (também chamada de Swap).\n"
-"\n"
-"\n"
-"Se as partições já tiverem sido definidas (por uma instalação prévia ou "
-"através\n"
-"de outra ferramenta particionadora), você precisa apenas escolher aquelas a "
-"usar\n"
-"para instalar o seu sistema Linux.\n"
-"\n"
-"\n"
-"Se as partições não tiverem sido definidas ainda, você precisa criá-las.\n"
-"Para fazer isso, use o ajudante disponível acima. Dependendo da\n"
-"configuração do seu disco rígido, várias soluções podem estar disponíveis:\n"
-"\n"
-"* Usar partição existente: o ajudante detectado uma ous mais partições Linux "
-"já existentes no seu disco rígido. Se\n"
-"  você quiser mantê-las, escolha essa opção. \n"
-"\n"
-"\n"
-"* Apagar todo o disco: se você quiser deletar todos os dados e todas as "
-"partições existentes no disco rígidos e   substituí-las pelo seu novo sitema "
-"Mandrake Linux, você pode escolher essa opção. Tenha cuidado com essa "
-"opção,\n"
-"  você não pode reverter sua escolha após a confirmação.\n"
-"\n"
-"\n"
-"* Usar o espaço livre na partição Windows: se o Microsoft Windows estiver "
-"instalado no seu disco rígido e tomar\n"
-"  todo o espaço disponível, você tem que criar espaço livre para o Linux. "
-"Para fazer isso, você pode deletar a sua\n"
-"  partição Microsoft Windows e dados (ver \"Apagar todo o disco\" ou "
-"soluções \"Modo Expert\") ou redimensionar\n"
-"  a sua partição Microsoft WIndows. O redimensionamento pode ser feito sem a "
-"perda de dados. Essa solução é\n"
-"  recomendada se você quiser usar o Mandrake Linux e o Microsoft Windows no "
-"mesmo computador.\n"
-"\n"
-"\n"
-"  Antes de escolher essa solução, favor entender que o tamanho de sua "
-"partição\n"
-"  Microsoft Windows será menor do que agora. Isso significa que você irá\n"
-"ter menos espaço livre no Microsoft\n"
-"  Windows para guardar os seus dados ou instalar novos programas.\n"
-"\n"
-"\n"
-"* Modo Expert: se você quiser particionar manualmente o seu disco rígido, "
-"escolha essa opção. Tenha cuidado\n"
-"  antes de escolhe-la. Ela é muito poderosa, mas muito perigosa. Você pode "
-"perder todos os seus dados\n"
-"  facilmente. Então não escolha essa solução a não ser que saiba o que faz."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Qualquer partição que acabou de ser criada deve ser\n"
-"formatada para o uso (formatar significa criar um sistema de arquivos).\n"
-"\n"
-"\n"
-"Agora, você pode reformatar algumas partições existentes para apagar os "
-"dados\n"
-"contidos nelas. Se você deseja fazer isso, favor também selecionar quais\n"
-"partições você deseja formatar\n"
-"\n"
-"\n"
-"Favor notar que não é necessário reformatar todas as partições já "
-"existentes.\n"
-"Você deve reformatar as partições contendo o sistema operacional (tal como\n"
-"\"/\",\"/usr\" ou \"/var\"), mas você não tem que reformatar as partições "
-"contendo\n"
-"dados que você deseja manter (normalmente /home).\n"
-"\n"
-"\n"
-"Favor tenha cuidado ao selecionar as partições, após formatá-las,\n"
-"todos os dados serão apagados e não pode ser recuperados.\n"
-"\n"
-"\n"
-"Cliquem em \"OK\" quando estiver pronto para formatar as partições.\n"
-"\n"
-"\n"
-"Clique em \"Cancelar\" se você desejar escolher outras partições para "
-"instalar\n"
-"o seu novo sistema operacional Mandrake Linux."
-
-#: ../../help.pm_.c:376
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Seu novo sistema operacional Mandrake Linux está sendo instalado\n"
-"Essa operação deve demorar algumas minutos (isso depende do tamanho que\n"
-"você escolheu para instalar e a velocidade do seu computador).\n"
-"\n"
-"\n"
-"Por favor seja paciente."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-#, fuzzy
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Agora você precisa escolher qual(is)\n"
-"partição(ões) utilizar para instalar o seu novo sistema Mandrake Linux. Se "
-"aspartições\n"
-"já estiverem definidas (através de uma instalação anterior do GNU/Linux ou "
-"outra\n"
-"ferramenta particionadora), você pode utilizá-las. Caso contrário, as\n"
-"partições devem ser definidas.\n"
-"\n"
-"\n"
-"Para criar partições, você deve primeiro selecionar um disco rígido. Você\n"
-"pode selecionar o disco clicando em \"hda\" para o primeiro drive IDE,\"hdb"
-"\" para\n"
-"o segundo ou \"sda\" para o primeiro drive SCSI e assim por diante.\n"
-"\n"
-"\n"
-"Para particionar o disco selecionado, você pode usar as seguintes opções:\n"
-"\n"
-"   * Limpar tudo: essa opção deletará todas as partições disponíveis do "
-"disco rígido selecionado.\n"
-"\n"
-"\n"
-"   * Auto alocar: essa opção lhe permite criar automaticamente partições "
-"Ext2 e swap no espaço livre do seu\n"
-"     disco rígido.\n"
-"\n"
-"\n"
-"   * Resgatar tabela de partição: se sua tabela de partição estiver "
-"danificada, você pode tentar recuperá-la usando\n"
-"     essa opção. Tenha cuidado e lembre-se que ela pode falhar.\n"
-"\n"
-"\n"
-"   * Desfazer: você pode usar essa opção para cancelar suas alterações.\n"
-"\n"
-"\n"
-"   * Recarregar: você pode usar essa opção se você desejar desfazer todas as "
-"suas alterações e recomeçar de novo\n"
-"\n"
-"\n"
-"   * Ajudante: se você desejar utilizar um ajudante para particionar o seu "
-"disco rígido, você pode usar essa opção.\n"
-"     É recomendada caso não tenha conhecimento sobre particionamento.\n"
-"\n"
-"\n"
-"   * Restaurar do disquete: se você salvou a sua tabela da partição em um "
-"disquete em um instalação anterior, você\n"
-"     pode recuperá-la com essa opção.\n"
-"\n"
-"\n"
-"   * Salvar em disquete: se você quiser salvar sua tabela de partição em um "
-"disquete para pode recuperá-la,\n"
-"     você pode usar essa opção. É altamente recomendado utilizá-la.\n"
-"\n"
-"\n"
-"   * Salvar: quando você terminar de particionar o seu disco rígido, use "
-"essa opção para salvar as alterações.\n"
-"\n"
-"\n"
-"Nota: você pode utilizar qualquer opção usando o teclado: navegue entre as "
-"partições usando Tab e as setas para cima/baixo.\n"
-"\n"
-"\n"
-"Quando a partiçõ estiver selecionada, você pode usar:\n"
-"\n"
-"           * Ctrl-c para criar uma nova partição (quando uma vazia estiver "
-"selecionada)\n"
-"           * Ctrl-d para deletar uma partição\n"
-"\n"
-"           * Ctrl-m para especificar um ponto de montagemSe você está "
-"instalando em uma Máquina PPC, você vai querer criar uma pequena partição "
-"'bootstrap' HFS de ao menos 1MB para\n"
-"usar com o gerenciador de boot yaboot. Se você quiser criar uma partição um "
-"pouco maior, digamos 50MB, você pode usar o espaço \n"
-"para guardar um kernel extra e uma imagem ramdisk para emergências."
-
-#: ../../help.pm_.c:460
-#, fuzzy
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Mais de uma partição Microsoft Windows foi detectada\n"
-"em seu disco rígido. Favor escolher a que você quer redimensionar para\n"
-"instalar o seu novo sistema operacional Mandrake Linux.\n"
-"\n"
-"\n"
-"Nota: cada partição é listada da seguinte forma: \"Nome Linux\", \"Nome\n"
-"Windows\" \"Capacidade\".\n"
-"\n"
-"\n"
-"\"Nome Linux\" é codificado da seguinte maneira: \"tipo do disco rígido\", "
-"\"número do disco rígido\", \"número da partição\" (por exemplo, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tipo do disco rígido\" é \"hd\" se seu disco rígido for IDE e \"sd\"\n"
-"se ele for um disco rígido SCSI.\n"
-"\n"
-"\n"
-"\"Número do disco rígido\" é sempre uma letra depois de \"hd\" ou \"sd\".Com "
-"discos rígidos IDE:\n"
-"\n"
-"   * \"a\" significa \"disco rígido mestre na controladora IDE primária\",\n"
-"\n"
-"   * \"b\" significa \"disco rígido escravo na controladora IDE primária\",\n"
-"\n"
-"   * \"c\" significa \"disco rígido mestre na controladora IDE secundária"
-"\",\n"
-"\n"
-"   * \"d\" significa \"disco rígido escravo na controladora IDE secundária"
-"\",\n"
-"\n"
-"\n"
-"Com discos rígidos SCSI, um significa \"disco rígido primário\", um \"b\" "
-"significa \"disco rígido secundário\", etc...\n"
-"\n"
-"\n"
-"\"Nome Windows\" é a letra do seu disco rígido no Windows (o primeirodisco\n"
-"ou partição é chamado \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Por favor seja paciente. Essa operação pode demorar vários minutos."
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Favor escolher \"Instalar\" caso não exista nenhuma versão anterior "
-"doMandrake Linux\n"
-"instalado ou se você deseja utilizar vários sistemas operacionais.\n"
-"\n"
-"\n"
-"Favor escolher \"Atualizar\" se você deseja atualizar uma versão instalada "
-"do Mandrake Linux.\n"
-"\n"
-"\n"
-"Dependendo do seu conhecimento sobre GNU/Linux, você pode escolher um dos "
-"seguintes níveis para instalar\n"
-"ou atualizar o seu Mandrake Linux:\n"
-"\n"
-"* Recomendado: se você nunca instalou um sistema GNU/Linux escolha esse. A "
-"instalação será bem\n"
-"  fácil e lhe serão perguntadas apenas algumas perguntas.\n"
-"\n"
-"\n"
-"* Personalizado: se você estiver familiarizado com o GNU/Linux, você pode "
-"escolher o uso primário (estação, \n"
-"  servidor, desenvolvimento) do seu sistema. Você responderá a mais "
-"perguntas do que na classe de instalação\n"
-"  \"Recomendada\", então você precisa saber com o GNU/Linux funciona para "
-"poder escolher esse nível.\n"
-"\n"
-"\n"
-"* Expert: se você tem um bom conhecimento sobre o GNU/Linux, você pode "
-"escolher essa classe. Como em \n"
-"  na classe \"Personalizado\", você poderá escolher o uso primário(estação, "
-"servidor, desenvolvimento)\n"
-"  Tenha muito cuidado antes de escolher essa classe. Você poderá fazer uma "
-"instalação bastante personalizada.\n"
-"  Responda a algumas questões que podem ser bem difíceis se você não tiver "
-"conhecimento sobre GNU/Linux.\n"
-"  Então, só escolha essa classe se souber o que está fazendo."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Favor selecionar a porta correta. Por exemplo, a porta COM1\n"
-"no MS Windows é chamada ttyS0 no GNU/Linux."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (o LInux LOader) e Grub são gerenciadors de boot: ele são capazes de\n"
-"de inicializar tanto no GNU/Linux quanto qualquer outro sistema\n"
-"operacional instalado. Normalmente, esses sistemas são detectados e\n"
-"instalados corretamente. Se esse não for o caso, você pode adicionar\n"
-"entradas manualmente nessa tela. Cuidado ao escolher os parâmetros "
-"corretos.\n"
-"\n"
-"\n"
-"Você pode também não dar acesso a esses sistemas operacionais para\n"
-"ninguém, na qual você pode deletar as entradas correspondentes. Mas nesse\n"
-"caso, você precisará de um disco de inicialização para poder utilizá-los!"
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Você precisa indicar onde você deseja\n"
-"guardar a informação necessária para inicializar o GNU/Linux.\n"
-"\n"
-"\n"
-"A não ser que você saiba exatamente o que está fazendo, escolha \"Primeiro\n"
-"setor do drive (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX tentará localizar adaptadores PCI SCSI. Se DrakX encontrar\n"
-"um adaptador SCSI e souber qual driver utilizar, ele será instalado\n"
-"automaticamente\n"
-"\n"
-"\n"
-"Se você não possuir adaptadores SCSI, um adaptador ISA SCSI ou PCI SCSI que\n"
-"DrakX não reconhece, você será perguntado se algum adaptador SCSI existe em "
-"seu\n"
-"sistema. Se não existir adaptadores, você pode clicar em \"Não\". Se você "
-"clicar em\n"
-"\"Sim\", uma lista de drivers aparecerá para que você possa escolher o seu\n"
-"adaptador.\n"
-"\n"
-"\n"
-"Se você tem que especificar manualmente o seu adaptador, DrakX perguntará "
-"se\n"
-"você quer especificar opções para ele. Você pode deixar que o DrakX examine "
-"o hardware\n"
-"para descobrir as opções. Isso normalmente funciona bem.\n"
-"\n"
-"\n"
-"Se não, você precisará prover as opções para o driver. Favor olhar o Guia do "
-"Usuário\n"
-"(capítulo 3, seção \"Coletando informações sobre seu hardware) para dicas "
-"sobre\n"
-"como descobrir essas informações na documentação do hardware, no Web site\n"
-"do fabricante (se você tiver acesso à Internet) ou no Microsoft Windows\n"
-"(se você tivé-lo no seu sistema)."
-
-#: ../../help.pm_.c:720
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Você pode adicionar entradas adicionais no yaboot, tanto para outros "
-"sistemas operacionais,\n"
-"kernels alternativos, ou imagem de boot de emergência.\n"
-"\n"
-"\n"
-"Para outros SO - a entrada consiste apenas de um nome e da partição root.\n"
-"\n"
-"\n"
-"Para Linux, existem algumas opções possíveis: \n"
-"\n"
-"\n"
-"  - Label: Isso é simplesmente o nome que será necessário pare entrar no "
-"sistema \n"
-"através do yaboot.\n"
-"\n"
-"\n"
-"  - Image: Isso seria o nome do kernel a ser usado. Tipicamente vmlinux ou "
-"uma\n"
-"variação de vmlinux com uma extensão.\n"
-"\n"
-"\n"
-"  - Root: O dispositivo padrão ou '/' da sua instalação Linux.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: No hardware Apple, a opção append (anexar) é normalmente usada "
-"para\n"
-"auxiliar na inicializando do hardware de vídeo, ou para permitir a emulação "
-"do botão\n"
-"do mouse pelo teclado, devido a falta do segundo e terceiro botão no mouse "
-"Apple.\n"
-"A seguir estão alguns exemplos:\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: Essa opção pode ser usada tanto para carregar módulos adicionais "
-"antes que\n"
-"o dispositivo de boot esteja disponível, ou para carregar uma imagem ramdisk "
-"de emergência.\n"
-"\n"
-"\n"
-"  - Initrd-size: O tamanho padrão do ramdisk é 4096 bytes. Se você precisar "
-"alocar\n"
-"um ramdisk maior, essa opção pode ser usada.\n"
-"\n"
-"\n"
-"  - Read-write: Normalmente a partição 'root' é inicialmente carregada como "
-"apenas-leitura,\n"
-"para permitir uma checagem do sistema antes de ativá-lo. Você pode modificar "
-"essa opção aqui.\n"
-"\n"
-"\n"
-"  - NoVideo: Se o hardware de vídeo Apple mostrar ser excepcionalmente "
-"problemática, você pode\n"
-"selecionar esse opção para entrar no modo 'semvídeo', com suporte nativo ao "
-"framebuffer.\n"
-"\n"
-"\n"
-"  - Default: Selecione essa entrada como sendo a opção padrão Linux, "
-"bastando pressionar\n"
-"ENTER no prompt do yaboot. Essa entrada também aparecerá marcada com um '*', "
-"se você\n"
-"pressionar TAB para ver as opções de boot."
-
-#: ../../help.pm_.c:765
-#, fuzzy
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot é o inicializador para hardware NewWorld MacIntosh. Ele é capaz\n"
-"de inicializar tanto o GNU/Linux, MacOS ou MacOSX, se existente no seu\n"
-"computador. Normalmente, esses outros sistemas operacionais são detectados\n"
-"corretamente e instalados. Se esse não for o seu caso, você pode adicionar\n"
-"entradas manualmente nesta tela. Escolha cuidadosamente os parâmetros.\n"
-"\n"
-"\n"
-"A principais opções do Yaboot são:\n"
-"\n"
-"\n"
-"  - Mensagem Inicial: uma pequena mensagem de texto que aparece antes do\n"
-"prompt do boot.\n"
-"\n"
-"\n"
-"  - Dispositivo de boot: Indica onde você quer colocar a informação "
-"necessária \n"
-"para entrar no GNU/Linux. Geralmente, você terá que configurar uma partição "
-"bootstrap \n"
-"para manter essa informação.\n"
-"\n"
-"\n"
-"   - Tempo de boot do Kernel: esse tempo é similar ao tempo de boot do "
-"LILO.  Após \n"
-"selecionar Linux, você terá 0.1 segundo antes do kernel padrão ser "
-"selecionado.\n"
-"\n"
-"\n"
-"   - Permitir CD Boot?: Marcar essa opção lhe permitirá escolher 'C' para CD "
-"no\n"
-"primeiro prompt do boot.\n"
-"\n"
-"\n"
-"   - Permitir OF Boot?: Marcar essa opção lhe permitirá escolher 'N' para "
-"Firmware\n"
-"Aberto no primeiro prompt de boot.\n"
-"\n"
-"\n"
-"   - SO padrão: você pode selecionar qual SO será iniciado por padrão quando "
-"o tempo \n"
-"do Firmware Aberto expirar."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Escolha o disco rígido que você quer apagar para instalar\n"
-"sua partição Mandrake Linux. Tenha cuidado, pois todos os dados existentes "
-"serão\n"
-"perdidos e não poderão ser recuperados."
-
-#: ../../help.pm_.c:832
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Clique em \"OK\" se você quiser apagar todos os\n"
-"dados e partição existentes nesse disco rígido. Tenha cuidado, pois após "
-"clicar\n"
-"em \"OK\", você não será capaz de recuperar os dados/partições existentes "
-"nesse\n"
-"disco rígido, incluindo quaisquer dados do Windows.\n"
-"\n"
-"\n"
-"Clique em \"Cancelar\" para cancelar essa operação sem perder qualquer dado\n"
-"e partição presente nesse disco rígido."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Você selecionou o(s) seguinte(s) serviço(s): %s\n"
-"\n"
-"\n"
-"Esses servidores são ativados por padrão. Eles não possuem nenhuma falha\n"
-"de segurança conhecida, mas pode existir uma nova. Nesse caso, você "
-"deveatualizá-lo\n"
-"o mais cedo possível.\n"
-"\n"
-"\n"
-"Você realmente quer instalar esses servidores?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Não pode usar broadcast sem domínio NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Insira um disquete FAT formatado no drive %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Esse disquete não está formatado como FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Para usar a seleção salva de pacotes, entre na instalação com ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Erro lendo arquivo %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Algum hardware no seu computador precisa de drivers ``proprietário'' \n"
-"para funcionar. Você pode encontrar informações sobre eles em: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Você deve ter uma partição root.\n"
-"Para isso, crie um partição (ou click em uma existen).\n"
-"Então escolha ação ``Ponto de montagem'' e coloque como `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Você tem que ter uma partição swap"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Você não possui uma partição swap\n"
-"\n"
-"Continuar mesmo assim?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Você tem que ter uma partição swap"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Usar espaço livre"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Sem espaço livre suficiente para alocar as novas partições"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Use partição existindo"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Não existe nenhuma tabela de partição para usar"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Usar a partição Windows para loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Qual partição você quer usar para o Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Escolha os tamanhos"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Tamanho da partição root em MB:"
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Tamanho da partição swap em MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Usar o espaço livre da partição Windows"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Qual partição você quer redimensionar?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Computando limites do sistema de arquivo do Windows"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"O redimensionar FAT é incapaz de manipular sua partição, \n"
-"o seguinte erro ocorreu: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Sua partição Windows está muito fragmentada, favor rodar primeiro o "
-"``defrag''"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATENÇÃO!\n"
-"\n"
-"Drakx precisa agorar redimensionar sua partição Windows. Tenha cuidado:\n"
-"essa operação é perigosa. Se você não tiver feito ainda, você deve rodar o\n"
-"scandisk no Windows (e opcionalmente rodar o defrag) nesta partição,\n"
-"então reiniciar a instalação. Você também deveria fazer backup de seus\n"
-"dados. Quando tiver certeza, pressione Ok."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Quanto de espaço você quer deixar para o windows em"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "partição %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Falha no redimensionamento FAT: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Não existem partições FAT para redimensionar ou para usar como loopback (ou "
-"não existe espaço suficiente)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Apague disco inteiro"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Remover Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Você tem mais de um disco rígido, em qual deles você quer instalar o linux?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Todas as partições que existem e todos os dados serão perdidos em disco %s"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Particionamento de disco personalizada"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Usar fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Você pode agorar particionar %s.\n"
-"Quando terminar, não esqueça de salvar usando `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Você não tem espaço livre na sua partição Windows"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Eu não achei espaço para instalação"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "O particionador DrakX encontrou as soluções seguintes:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "O particionamento falhou: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Trazendo (acessando) a rede"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Fechando (desconectando) a rede"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Um erro ocorreu, mas eu não sei como lidar com ele.\n"
-"Continue a seu próprio risco."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Ponto de montagem %s duplicado"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Alguns pacotes importantes não foram instalados corretamente.\n"
-"O seu drive de cdrom ou o seu cdrom está defeituoso.\n"
-"Cheque o cdrom em um computador instalado usando \"rpm -qpl Mandarke/RPMS/*."
-"rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bem-vindo à %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Nenhum drive de disquete disponível"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entrando no passo `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Escolha o tamanho que você deseja instalar"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Tamanho total: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versão: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tamanho: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Escolha os pacotes que você quer instalar"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Informação"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Instalar"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Instalando"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Por favor aguarde, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Tempo restante "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Tempo total "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Preparando instalação"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalando pacote %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Continuar mesmo assim?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Houve um erro ordenando os pacotes:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Usar o configuração existente para o X11?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Seu sistema está com poucos recursos. Você pode ter algum problema na\n"
-"instalação do Mandrake Linux. Se isso ocorrer, você pode tentar instalar "
-"usando o\n"
-"modo texto. Para isso, aperte `F1' na tela de inicialização e escreva `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Classe de Instalação"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Por favor escolhe uma das seguintes classes de instalação:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"O tamanho total dos grupos que você selecionou é de aproximadamente %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Se você deseja instalar menos que esse tamanho,\n"
-"selecionar a percentagem de pacotes que você quer instalar.\n"
-"\n"
-"Uma baixa percentagem irá instalar apenas os pacotes mais importantes;\n"
-"uma percentagem de 100%% irá instalar todos os pacotes selecionados."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Você tem espaço em seu disco para apenas %d%% desses pacotes.\n"
-"\n"
-"Se você deseja instalar menos que esse tamanho,\n"
-"selecionar a percentagem de pacotes que você quer instalar.\n"
-"Uma baixa percentagem irá instalar apenas os pacotes mais importantes;\n"
-"uma percentagem de %d%% irá instalar o máximo de pacotes possível."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Você será capaz de escolhe-los mais precisamente no próximo passo"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Percentagem de pacotes a serem instalados"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Seleção de Grupo de Pacotes"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Seleção individual de pacotes"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tamanho total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Pacote defeituoso"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nome: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importância: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Você não pode selecionar esse pacote pois não existe espaço livre para "
-"instalá-lo"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Os seguintes pacotes serão instalados"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Os seguintes pacotes serão removidos"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Você não pode selecionar/deselecionar esse pacote"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Esse é um pacote obrigatório, não pode ser deselecionado"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Você não pode deselecionar esse pacote. Ele já está instalado"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Esse pacote tem que ser atualizado\n"
-"Tem certeza que você quer deselecioná-lo?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Você não pode deselecionar essa pacote. Ele tem que ser atualizado"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Mostra automaticamente os pacotes selecionados"
-
-#: ../../install_steps_gtk.pm_.c:460
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Salvar em disquete"
-
-#: ../../install_steps_gtk.pm_.c:461
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Salvar seleção de pacotes"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Minimal install"
-msgstr "Sair da instalação"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Estimando"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Por favor aguarde, preparando instalação"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d pacotes"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Aceitar"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Recusar"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Mude o seu Cd-Rom!\n"
-"\n"
-"Favor inserir o Cd-Rom rotulado \"%s\" no seu drive e aperte em Ok quando "
-"estiver pronto.\n"
-"Se você não o tiver, aperte em Cancelar para evitar a instalação desse Cd-"
-"Rom."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Houve um erro instalando os pacotes:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Ocorreu um erro"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Contrato de licença"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teclado"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Favor escolher o layout do seu teclado."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Aqui está a lista completa de teclados disponíveis"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Qual classe de instalação você quer?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Instalar/Atualizar"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Isso é uma instalação ou atualização?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Recomendado"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Atualizar"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Favor escolher o tipo do seu mouse."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Porta do Mouse"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Favor escolher em qual porta serial seu mouse está conectado."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Emulação dos botões"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Emulação dos 2 botões"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Emulação dos 3 botões"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Configurando cartões PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Configurando IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "sem partições disponíveis"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Escanenado partições para encontrar pontos de montagem"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Escolha os ponto de montagem"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Eu não consigo ler sua tabela de partição, é muito defeituosa para mim :(\n"
-"Eu posso tentar continuar limpando as partições defeituosas (TODOS OS DADOS\n"
-"serão perdidos!). A outra solução é não deixar o DrakX modificar a tabela\n"
-"de particão. (o erro é %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"O DiskDrake falhou na leitura da tabela de partição.\n"
-"Continue a seu próprio risco!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:349
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Escolha as partições que você quer formatar"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Partição Root"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Qual a partição root (/) do seu sistema?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Você precisa reiniciar para que as modificações na tabela de partição tenham "
-"efeito"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Escolha as partições que você quer formatar"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Checar blocos defeituosos?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Formatando partições"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Criando e formatando arquivo %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Sem swap suficiente para completar a instalação, favor adicionar mais"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Procurando por pacotes disponíveis"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Procurando pacotes à atualizar"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Seu sistema não tem espaço suficiente para instalção ou atualização (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completa (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Mínima (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomendada (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Personalizada"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:525
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Restaurar do disquete"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Restaurar do disquete"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Package selection"
-msgstr "Seleção de Grupo de Pacotes"
-
-#: ../../install_steps_interactive.pm_.c:532
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Insira um disquete no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Salvar em disquete"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "O tamanho escolhido é maior que o espaço disponível"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se você tiver todos os CDs da lista abaixo, clique em Ok.\n"
-"Se você não tiver nenhum desses CDs, clique em Cancelar.\n"
-"Se apenas alguns CDs estiverem faltando, desmarque-os, então clique em Ok."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom rotualdo \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalando pacote %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Configuração pós-instalação"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Insira um disquete no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Insira um disquete vazio no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Você agora tem a possibilidade de fazer o download de software voltado para "
-"codificação (encriptação).\n"
-"\n"
-"ATENÇÃO:\n"
-"Devido a vários requerimentos requeridos aplicados à esses software e "
-"impostos\n"
-"por várias jurisdições, o cliente e/ou o usuário final desse software deve\n"
-"se assegurar que as leis da sua jurisdição lhe permite fazer o download, "
-"armazenar\n"
-"e/ou usar esse software.\n"
-"\n"
-"Além disso, o cliente e/ou o usuário final deve estar particularmente "
-"prevenido para\n"
-"não infringir as leis de sua jurisdição. Se o cliente e/ou o usuário final\n"
-"não respeitar a provisão dessas leis aplicáveis, irá lhe(s) ocorrer sérias\n"
-"sanções.\n"
-"\n"
-"Em nenhum acontecimento irá a Mandrakesoft ou seu manufaturadores e/ou seu "
-"fornecedor\n"
-"ser responsávei por danos especiais, indiretos ou acidentais seja, qual for\n"
-"(incluindo, mas não limitada à perda de lucros, interrupção de negócios, "
-"perda\n"
-" de informação comercial e outras perdas monetárias, e eventual "
-"endividamento e indenização\n"
-"a ser paga, de acordo com a decisão da corte) saindo do uso, posse, ou do\n"
-"download isolado desse software, do qual o cliente e/ou o usuário final "
-"pode\n"
-"eventualmente ter acesso após ter assinado o acordo presente.\n"
-"\n"
-"\n"
-"Para qualquer pergunta relacionada a esse acordo, favor entrar em contato \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Escolha um mirror (espelho) de onde pegar os pacotes"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Contactando o mirror (espelho) para pegar a lista de pacotes disponíveis"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Escolha os pacotes que você quer instalar"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Qual é o seu fuso horário?"
-
-#: ../../install_steps_interactive.pm_.c:813
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "O seu relógio do hardware está configurado como GMT?"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:821
-#, fuzzy
-msgid "NTP Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Sevidor CUPS remoto"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Nenhuma impressora"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Sumário"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Mouse"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Fuso horário"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Impressora"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "Placa ISDN"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Placa de som"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "Placa de TV"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-#, fuzzy
-msgid "NIS"
-msgstr "Usar NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-#, fuzzy
-msgid "Local files"
-msgstr "Impressora local"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Especificar senha do root"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Nenhuma senha"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Essa senha é muito simples (deve ter ao menos %d caracteres)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Autenticação?"
-
-#: ../../install_steps_interactive.pm_.c:949
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autenticação?"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:951
-#, fuzzy
-msgid "LDAP Server"
-msgstr "servidor"
-
-#: ../../install_steps_interactive.pm_.c:957
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Autenticação NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "Domínio NIS"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Um disco de inicialização provê uma maneira de dar boot no Linux sem\n"
-"depender de um inicializador normal. Isso é necessário se você não quiser "
-"instalar\n"
-"o SILO no seu sistema, ou se outro sistema operacionar remover o SILO, ou\n"
-"o se\n"
-"SILO não funcionar com o seu hardware. Um disco de inicialização também\n"
-"pode\n"
-"ser usado com uma imagem de backup do Mandrake deixando muito mais fácil\n"
-"recuperar\n"
-"um sistema com danos severos.\n"
-"\n"
-"Se você quiser criar um disco de inicialização para o seu sistema, insira um "
-"disquete\n"
-"no drive e aperte em \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Primeiro drive de disquete"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Segundo drive de disquete"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Pular"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Um disco de inicialização provê uma maneira de entrar no Linux sem depender\n"
-"de um inicializador normal. Isso é necessário se você não quiser instalar o "
-"LILO (ou\n"
-"o grub) no seu sistema, ou se outro sistema operacionar remover o LILO, ou "
-"se o LILO\n"
-"não funcionar com o seu hardware. Um disco de inicialização também pode ser "
-"usado com\n"
-"uma imagem de backup do Mandrake, deixando muito mais fácil recuperar um "
-"sistema\n"
-"com danos severos. Você quer criar um disco de inicialização?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Desculpe, nenhum drive de disquete disponível"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Escolha o drive de disquete que você quer usar para criar o disco de "
-"inicialização"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Insira um disquete no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Criando disco de inicialização"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Preparando gerenciador de inicialização"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Você quer usar o aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Erro instalando o aboot, \n"
-"tentar forçar a instalação, mesmo que isso destrua a primeira partição?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Instalar gerenciador de inicialização"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"A instalação do gerenciador de inicialização falhou. Ocorreram os seguintes "
-"erros:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Você pode precisar mudar seu dispostivo de boot Open Firmware\n"
-" para ativar o gerenciado de boot. Se você não ver o prompt dele ao\n"
-" reiniciar, segure Command-Option-O-F ao reiniciar e digite:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Então escreva: shut-down\n"
-"No seu próximo boot, você deve ver o prompt do gerenciador de boot."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Baixo"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Médio"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Alto"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Escolha nível de segurança"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Insira um disquete vazio no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Criando disquete de auto instalação"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Alguns passos não foram completados.\n"
-"\n"
-"Você realmente quer sair agora?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Parabéns, a instalação foi completada.\n"
-"Remova a mídia de inicialização e aperte enter para reiniciar.\n"
-"\n"
-"Para informações sobre correções disponíveis para essa versão do Mandrake "
-"Linux,\n"
-"consulte a Errata disponível em http://www.mandrakelinux.com/.\n"
-"\n"
-"Informações sobre a configuração do sistema estão disponíveis no\n"
-"capítulo pós-instalação do Guia Oficial de Usuário Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Criar disquete de auto instalação"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"A auto instalação pode ser totalmente automatizada se\n"
-"você quiser, nesse caso, ela tomará de conta do disco\n"
-"rígido!! (em vista a instalação em outra máquina).\n"
-"\n"
-"Você pode preferir repetir a instalação.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automático"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Repetir"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Salvar seleção de pacotes"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalação do Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> move entre opções  | <Espaço> seleciona | <F12> próxima "
-"tela "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu ausente"
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "Escolher ação"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Avançado"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Por favor aguarde"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Expandir Árvore"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Colapsar Árvore"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Mudar entre organização plana ou em grupo"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Ambiguidade (%s), seja mais preciso\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Má escolha, tente novamente\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (padrão %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Sua escolha? (padrão %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Sua escolha? (padrão %s digite `none' para nenhum) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Tcheco (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Alemão"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Espanhol"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Filandês"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Francês"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norueguês"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Polonês"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Russo"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Sueco"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Inglês (UK)"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "Americano (US)"
-
-#: ../../keyboard.pm_.c:159
-#, fuzzy
-msgid "Albanian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armênio (velho)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armênio (máquina de escrever)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armênio (fonético)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latino)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Búlgaro"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasileiro (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Bielorusso"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Suíço (layout Alemão)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Suíço (layout Francês)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Tcheco (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Alemão (sem teclas mortas)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Dinamarquês"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norueguês)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estoniano"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiano (layout \"Russo\")"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiano (layout \"Latin\")"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Grego"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Húngaro"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Israelense"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Israelense (Fonético)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islandês"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Italiano"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japonês 106 teclas"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Koreano"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latino Americano"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituânio AZERTY (velho)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituânio AZERTY (novo)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituânio \"número de colunas\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituânio \"fonético\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "Lugar"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Macedônio"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Holandês"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Polonês (layout QWERTY)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Polonês (layout QWERTZ)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Português"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Canadense (Quebec)"
-
-#: ../../keyboard.pm_.c:217
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Russo (Yawerty)"
-
-#: ../../keyboard.pm_.c:218
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Russo (Yawerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Russo (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Eslovênio"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslováquio (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Eslováquio (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaidjani (cirílico)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Teclado Tailandês"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Teclado Tailandês"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turco (modelo \"F\" tradicional)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turco (modelo moderno \"Q\")"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ucraniano"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "Americano (Internacional)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"número de colunas\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Iugoslávio (latin/cirílico)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Monts circulares %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Remover os volumes lógicos primeiro\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Padrão"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan/FistMouse (serial)"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Mouse Genérico PS2 com roda"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 botão"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Genérico"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Roda"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "serial"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Mouse Genérico com 2 Botões"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Mouse Genérico com 3 Botões"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech Série CC (serial)"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "Série MM"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Mouse Logitech (serial, tipo C7 antigo)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 botões"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 botões"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "nenhum"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Nenhum Mouse"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Favor testar o mouse"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Para ativar o mouse,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVA SUA RODA!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Terminar"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Próximo ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Isto está correto?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Conectar à Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"A maneira mais comum de se conectar com adsl é pppoe.\n"
-"Mas algumas conexões usam pptp, umas poucas usam dhcp.\n"
-"Se você não sabe, escolha 'usar pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "usar dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "usar pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "usar pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Qual cliente dhcp você quer usar?\n"
-"O padrão é dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nenhum adaptador de rede ethernet foi detectado em seu sistema.\n"
-"Eu não posso configurar esse tipo de conexão."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Escolha a interface de rede"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Favor escolher qual adaptador de rede você quer usar para se conectar à "
-"Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nenhuma placa de rede encontrada"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Configurando rede"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Favor entrar com o nome do seu host (se você souber).\n"
-"Alguns servidores DHCP requerem o nome do host para funcionar.\n"
-"Seu nome do host deve ser um nome de host totalmente qualificado,\n"
-"como por exemplo ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Host name (nome do host)"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Auxiliar de Configuração da Rede"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem ISDN externo"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Placa ISDN interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "De que tipo é sua conexão ISDN?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Configuração de Firewall detectado!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Configuração de Firewall detectado!"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "Configuração ISDN"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Selecione o seu provedor.\n"
-" Se não estiver na lista, escolha Não Listado"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protocolo da inicialização"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Resto do mundo"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Resto do mundo \n"
-" sem Canal-D (linhas arrendadas)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Qual protocolo você quer usar?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Qual tipo de placa você tem?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Eu não sei"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Se você tiver uma placa ISA, os valores da próxima tela devem estar certos.\n"
-"\n"
-"Se você tiver uma placa PCMCIA, você tem que saber o irq e io de sua placa.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Abortar"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Continuar"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Qual é a sua placa ISDN?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Eu detectei um placa ISDN PCI, mas não sei qual é o tipo. Favor selecionar "
-"uma placa PCI na próxima tela."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nenhuma placa ISDN PCI encontrada. Favor selecionar uma na próxima tela"
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Favor escolher em qual porta serial seu modem está conectado."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Opções dialup"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Nome da conexão"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Número do telefone"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "ID de Login"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Baseado em script"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Baseado em terminal"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Nome do domínio"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Primeiro Servidor DNS (opcional)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Segundo Servidor DNS (opcional)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Você pode se disconectar ou reconfigurar sua conexão."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Você pode reconfigurar sua conexão."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Você está conectado à Internet."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Você pode se conectar à Internet ou reconfigurar sua conexão."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Você não está conectado à Internet."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Conectar à Internet"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Disconectar da Internet"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Configurar conexão de rede (LAN ou Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Conexão e configuração da Internet"
-
-#: ../../network/netconnect.pm_.c:96
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Você pode se disconectar ou reconfigurar sua conexão."
-
-#: ../../network/netconnect.pm_.c:105
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Você pode se disconectar ou reconfigurar sua conexão."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Configuração da Rede"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Como você está fazendo uma instalação por rede, sua rede já está "
-"configurada.\n"
-"Clique em Ok para manter sua configuração, ou cancelar para reconfigurar sua "
-"conexão de Internet & Rede.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Bem-vindo ao Ajudante de Configuração de Rede\n"
-"\n"
-"Estamos para configurar sua conexão de rede/internet.\n"
-"Se você não quiser usar a auto detecção, desmarque a opção.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Escolha o perfil a configurar:"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Usar auto detecção"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Detectando dispositivos..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Conexão normal via modem"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "detectado na porta %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "Conexão ISDN"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "detectado %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Coneção LAN"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "detectado na interface %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Conexão via cabo"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Conexão via cabo"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "Coneção LAN"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "placa(s) ethernet detectada(s)"
-
-#: ../../network/netconnect.pm_.c:190
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Escolha a ferramente que você quer usar"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:215
-#, fuzzy
-msgid "Internet connection"
-msgstr "Compartilhamento da Conexão à Internet"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Você quer iniciar sua conexão ao iniciar?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Configuração da Rede"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Um problema ocorreu reiniciando a rede: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Parabéns, a configuração da rede e internet está concluída.\n"
-"\n"
-"A configuração agora será aplicada no seu sistema.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Quando isso terminar, nós recomendados você a reiniciar o seu\n"
-"ambiente X para evitar o problema da mudança do nome do host."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ATENÇÃO: Esse dispostivo já foi configurado para se conectar à Internet.\n"
-"Apenas aceite para manter esse dispositivo configurado.\n"
-"A modificação dos campos abaixo irá sobrepor essa configuração."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Favor entrar com a configuração IP para esta máquina.\n"
-"Cada item deve ser entrando como endereço IP pontilhado-decimal\n"
-"(por exemplo, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Configurando dispositivo de rede %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "Endereço IP"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "IP Automático"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "O endereço IP deve ser no formato 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Favor entrar com o nome do seu host.\n"
-"Seu nome do host deve ser um nome de host totalmente qualificado,\n"
-"como por exemplo ``mybox.mylab.myco.com'' .\n"
-"Você também pode entrar como o endereço IP de um gateway se você tiver um"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "Servidor DNS"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Dispositivo de gateway"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Configuração de proxies"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "O proxy deve ser http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "O proxy deve ser ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Configuração da Internet"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Você quer tentar se conectar à Internet agora?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Testando sua conexão..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "O sistema está conectado à Internet."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Por razão de segurança, você será desconectado agora."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"O sistema não está conectado à internet.\n"
-"Tente reconfigurar sua conexão."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Configuração da Conexão"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Favor preencher ou marcar os campos abaixo"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ da Placa"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Memória da Placa (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "IO da Placa"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "IO_O da Placa"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "IO_1 da Placa"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "O número do seu telefone"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Nome do provedor (ex: provedor.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Número do telefone do provedor"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 do provedor (opcional)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 do provedor (opcional)"
-
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "Escolha seu teclado"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Modo de discagem"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-#, fuzzy
-msgid "Connection speed"
-msgstr "Tipo de conexão: "
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Tipo de conexão: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Nome da conta (nome do usuário)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Senha da conta"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Partição extendida não suportada nessa plataforma"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Você tem um buraco em sua tabela de partição e eu não posso usá-lo.\n"
-"A única solução é mover suas partições primárias para ter o buraco próximo "
-"das partições extendidas"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restauração pelo arquivo %s falhou: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Erro gravando no arquivo %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Algo ruim está acontecendo com o seu drive. \n"
-"O teste que checa a integridade dos dados falhou. \n"
-"Isso significa que gravar algo no disco resultará em lixo aleatório."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "tem que ter"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "importante"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "muito bom"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bom"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "talvez"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Impressora local"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Impressora remota"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Sevidor CUPS remoto"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Servidor lpd remoto"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Impressora da rede (socket)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Servidor de Impressão"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Dispositivo de Impressão URI"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(módulo %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Selecionar Coneção da Impressora"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Como a impressora está conetada?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"Com um servidor CUPS remoto, você não tem que configurar\n"
-"nenhuma impressora aqui; elas serão detectadas automaticamente.\n"
-"Se tiver dúvida, selecione \"Servidor CUPS remoto\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-#, fuzzy
-msgid "None"
-msgstr "Pronto"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Escolha o usuário:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Fechar"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "O endereço IP deve ser no formato 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "O número da porta deve ser numérico"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "IP do servidor CUPS"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Porta"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Configuração do estilo de inicialização"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Detectando dispositivos..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Testar portas"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Uma impressora, modelo \"%s\", foi detectado no "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Dispositivo da Impressora Local"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"A qual dispositivo sua impressora está conectada \n"
-"(note que /dev/lp0 é equivalente a LPT1:)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Dispositivo da Impressora"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Opções da impressora lpd Remota"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Para usar uma fila de impressão lpd remota, você precisa\n"
-"dar o nome do host e o servidor de impressão e o nome da\n"
-"fila naquele servidor."
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nome do host remoto"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:320
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Nome do host remoto"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nome do host remoto"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opções de Impressão SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Para imprimir em uma impressora SMB, você precisa\n"
-"dar o nome do host SMB (Nota! Ele pode ser diferente\n"
-"do host TCP/IP!) e possivelmente o endereço IP do servidor de impressão,\n"
-"como também o nome compartilhado para a impressora que você deseja acessar "
-"e\n"
-"qualquer informação aplicável sobre nome de usuário, senha e grupo de "
-"trabalho."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "Host servidor SMB"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "IP do servidor SMB"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Nome compartilhado"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Grupo de trabalho"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "Opções de Impressão NetWare"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Para imprimir em uma impressora NetWare, você precisar dar o\n"
-"nome do servidor de impressão NetWare (Nota! ele pode ser diferente\n"
-"do host TCP/IP!) como também o nome da fila de impressão para a impressora\n"
-"que você deseja acessar como qualquer nome de usuário e senha aplicável."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Servidor de Impressão"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Nome da Fila de Impressão"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Opções da Impressora Socket"
-
-#: ../../printerdrake.pm_.c:528
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Para imprimir em uma impressora socket, você precisa prover\n"
-"o nome do host da impressora e a número da porta (opcional)."
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "Nome do host da impressora"
-
-#: ../../printerdrake.pm_.c:537
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Nome do host da impressora"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Dispositivo de Impressão URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Nome da impressora"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Descrição"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Lugar"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:793
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Conexão da Impressora"
-
-#: ../../printerdrake.pm_.c:794
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Qual tipo de impressora você tem?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Configuração da Internet"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Configuração da Internet"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Você quer testar a impressão?"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "Testar portas"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-#, fuzzy
-msgid "No test pages"
-msgstr "Sim, imprimir ambas as páginas de teste"
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "Impressora"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "Padrão"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Imprimindo página(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "Imprimindo página(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Imprimindo página(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"A pagina de teste foi mandado ao demónio de impressão,\n"
-"pode demorar um pouco até a impressora começar.\n"
-"Estado da impressão:\n"
-"%s\n"
-"\n"
-"A impressão funcionou corretamente?"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"A pagina de teste foi mandado ao demónio de impressão,\n"
-"pode demorar um pouco até a impressora começar.\n"
-"A impressão funcionou corretamente?"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Nenhuma impressora"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Fechando (desconectando) a rede"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "Opções da impressora"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Configuração da Internet"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "O nome da impressora deve conter apenas letras, números e o símbolo _"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "Nenhuma impressora"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Iniciando sua conexão..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Configurar rede"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor não configurado"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Configurando rede"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Qual sistema de impressão você quer usar?"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Alto"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranóico"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Qual sistema de impressão você quer usar?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Selecionar Coneção da Impressora"
-
-#: ../../printerdrake.pm_.c:1728
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Qual sistema de impressão você quer usar?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configurar Impressora"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Opções da impressora"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:1845
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Você gostaria de configurar uma impressora?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Modo Normal"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Default)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Sevidor CUPS remoto"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "Sevidor CUPS remoto"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-#, fuzzy
-msgid "Add printer"
-msgstr "Nenhuma impressora"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Você quer testar a configuração?"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Configuração da Internet"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Compartilhamento da Conexão à Internet"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Conexão da Impressora"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "Imprimindo página(s) de teste..."
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Você quer reiniciar a rede"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Configuração de proxies"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Porta"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "O proxy deve ser http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "O número da porta deve ser numérico"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "O proxy deve ser ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Autologin"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Senha"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Nenhuma senha"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "As senhas não conferem"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Não posso adicionar partição ao RAID _formatado_ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Não posso gravar arquivo %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid falhou"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid falhou (talvez o raidtools esteja faltando)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Sem partições suficientes para RAID nível %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Iniciar o sistema de som ALSA (Arquitetura Avançada de Som Linux)"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, um agendador de comando periódicos"
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd é usado para monitarar o estado da bateria e gravando-o via syslog.\n"
-"Ele também pode ser usado para desligar a máquina quando a bateria estiver "
-"fraca."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Executa comando agendados pelo comando at na hora especificado quando\n"
-"at estava rodando, e executa comandos grupos de comandos quando o uso de "
-"memória estiver baixo o suficiente."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron é um program UNIX padrão que executa progrmas especificados pelo\n"
-"usuaio em horas marcadas. vixie cron adiciona várias características ao "
-"UNIX\n"
-"cron básico, incluindo melhor segurança e melhores opções de configuração."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM adiciona suporte ao mouse à aplicativos Linux com base em texto\n"
-"tal como o Midnight Commander. Ele também permitir copiar e colar "
-"utilizando\n"
-"o mouse e inclui suporte para menus pop-up no console."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake executa uma detecção do hardware existente, e\n"
-"opcionalmente configura um novo/alterado hardware."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache é um servidor World Wide Web. Ele é usado para servir arquivos\n"
-"HTML e CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"O internet superserver daemon (normalmente chamado inetd) inicia\n"
-"uma variedade de outros serviços de internet quando necessário. É "
-"responsável\n"
-"pela inicialização de vários serviços, incluindo telnet, ftp, rsh e rlogin. "
-"Disabilitando\n"
-"inetd, todos os serviços pela qual ele é responsável também são "
-"desabilitados."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Iniciar filtro de pacots para kernel Linux série 2.2, para criar\n"
-"um firewall para proteger sua máquina de ataques de rede."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Esse pacote carrega o mapa de teclado selecionado como\n"
-"um comando em /etc/sysconfig/keyboard. Isso pode ser selecionado usando o\n"
-"utilitário kbdconfig. Você deve deixar isso ativar para a maioria da "
-"máquinas."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Regeneração automática do heador do kernel no /boot para\n"
-"/usr/include/linux{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Detecção e configuração automática do hardware na inicialização."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf irá periodicamente executar várias tarefas durante a\n"
-"inicialização para manter a configuração do sistema"
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd é o daemon de impressão requerido para o lpr funcionar corretamente.\n"
-"Ele é basicamente um servidor que organiza os trabalhos à(s) impressora(s)."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Servidor Virtual Linux, utilizado para criar um servidor de alta\n"
-"performance e alta acessibilidade."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) é um Servidor de Nome de Domínio (DNS) que é usado para\n"
-"transformar nome de hosts para endereços IP."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monta e desmonta todos os pontos de montagem do Network File\n"
-"System (NFS), SMB (Gerenciador de Rede/Windows) e NCP (NetWare)."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Ativa/Desativa todas as interfaces de rede configuradas para iniciar\n"
-"na hora de inicialização."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS é um protocolo popular usado no compartilhamento de arquivos através\n"
-"de redes TCP/IP. Esse serviço provê a funcionalidade do servidor NFS, que é "
-"configurado através do arquivo /etc/exports."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS é um protocolo popular usado para compartilhar arquivos através de\n"
-"redes TCP/IP. Esse serviço provê a funcionalidade de trava de arquivos NFS."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automaticamente ativa o Num Lock no console e XFree\n"
-"durante a inicialização."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Suporte para impressoras OKI-4w e compatíveis."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Suporte PCMCIA é utilizado normalmente para suportar coisas como\n"
-"ethernet ou modems em laptops. Ele não será iniciado a não ser que "
-"estejaconfigurado,\n"
-"então é seguro te-lo instalado em máquinas que não precisam dele."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"O portmapper gerencia conexões RPC, que são usadas por\n"
-"protocolos como NFS ou NIS. O servidor portmap deve estar rodando em "
-"máquinas\n"
-"que serão os servidores para os protocolos que utilizam o mecanismo RPC."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix é um Agente de Transporte de Correio, que é um programa\n"
-"que move mensagens entre uma máquina e outra."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Salva e restaura o entropy pool do sistema para melhor qualidade\n"
-"na geração randômica de número."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Determinar dispositivos raw como dispositovs de bloco\n"
-"(como partições), para o uso em aplicativos como o Oracle"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"O daemon routed permite a atualização automática da tabela roteadora\n"
-"IP através do protocolo RIP. Enquanto o RIP é usado largamente em pequenas\n"
-"rede, protocolos de roteamento mais complexos são necessários em redes mais "
-"complexas."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"O protcolo rstat permite que usários da rede recebam\n"
-"informações sobre a perfomance de qualquer máquina na rede."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"O protocolo rusers pertmite que os usuários da rede identifiquem\n"
-"quem está logado na máquina correspondente do outro."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"O protocolo rwho permite que usuários remotos peguem uma lista de todos os\n"
-"usuários logados em uma máquina rodando o daemon rwho (similar ao finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Iniciar o sistema de som da sua máquina"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog é um aparato que muitos daemons usam para gravar mensagens\n"
-"em vários arquivos de log. É uma boa idéia sempre rodar o syslog."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Carrega os drivers para seus dispositivos usb."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Inicia o Servidor de Fontes X (é obrigatório para a execução do XFree)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Escolha quais serviços devem ser inicializados automaticamente na "
-"inicalização"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "Impressora"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "Modo do sistema"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Opções da impressora lpd Remota"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Servidor, Bancos de dados"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "dispositivo"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "iniciado"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "parado"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Serviços e daemons"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Nenhuma informação adicional\n"
-"sobre este serviço, desculpe."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "No boot"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instalando pacote %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Eu não consigo ler sua tabela de partição, é muito defeituosa\n"
-"para mim. Eu irei tentar continuar limpando as partições defeituosas"
-
-#: ../../standalone/drakautoinst_.c:44
-#, fuzzy
-msgid "Error!"
-msgstr "Erro"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Configuração pós-instalação"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Configuração do estilo de inicialização"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Parabéns!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Compartilhamento da Conexão à Internet"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "O Compartilhamento da Conexão à Internet está ativo"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configuração de compartilhamento da conexão à Internet já foi feita.\n"
-"Ela está ativa.\n"
-"\n"
-"O que você gostaria de fazer?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "desativar"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "liberar"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "reconfigurar"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Desativando servidores..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "O Compartilhamento da Conexão à Internet agora está desativado."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "O Compartilhamento da Conexão à Internet está desativado"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configuração do compartilhamento da conexão à Internet já foi feito.\n"
-"Está desabilitado.\n"
-"\n"
-"O que você gostaria de fazer?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "ativar"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Ativando servidores..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "O Compartilhamento da Conexão à Internet agora está ativo."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Você está para configurar o compartilhamento da conexão à Internet do seu \n"
-"computador. Assim, outros computadores da sua rede local serão capaz de user "
-"a conexão à Internet deste computador.\n"
-"\n"
-"Nota: você precisa de um Adaptador de Rede dedicado para criar um Rede Local "
-"(LAN)."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (usando módulo %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Nenhum adaptador de rede em seu sistema!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nenhum adaptador de rede foi detectado em seu sistema. Favor executar a "
-"ferramenta de configuração de hardware."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Interface de rede"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Existe apenas um adaptador de rede configurado em seu sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Irei configurar sua Rede Local (LAN) com esse adaptador."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Favor escolher qual adaptador de rede será conectado à su Rede Local."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Atenção, o adaptador de rede já foi configurado. Eu irei reconfigurá-lo."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potencial conflinto de endereço LAN encontra na configuração atual de %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Configuração de Firewall detectado!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Atenção! Uma configuração de firewall foi detectada. Talvez você terá que "
-"fazer alguma correção manual após a instalação."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Configurando..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Configurando scripts, instalando programas, iniciando servidores..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemas instalando pacote %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Tudo foi configurado.\n"
-"Você agora pode compartilhar sua conexão com outros computadores na sua Rede "
-"Local (LAN), usando a configuração automática de rede (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "A configuração já foi feita, mas está desativada."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "A configuração já foi feita e está desativada."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "O Compartilhamento de Conexão à Internet nunca foi configurado."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Configuração do compartilhamento da Internet"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Bem-vindo ao utilitário de Compartilhamente da Conexão à Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Clique em ``Configurar'' se você quiser abrir o ajudante de configuração."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuração da Rede (%d adaptadores)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Perfil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Apagar perfil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Perfil a apagar:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Novo perfil..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Hostname:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Acesso à Internet"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Tipo:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Interface:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Conectado"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Não conectado"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Conectar..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Desconectar..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Iniciando sua conexão..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Fechando sua conexão..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"A conexão não foi fechada.\n"
-"Tente fazê-lo manualmente executando\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"como root."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "O sistema agora está conectado à Internet."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Configurar Acesso à Internet..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "Configuração LAN"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protocolo"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "State"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Configurar Rede Local (LAN)..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Aplicar"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Por favor aguarde... Aplicando a configuração"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Você não possui nenhuma interface configurada.\n"
-"Configure-as primeiro clicando em 'Configurar'"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "Configuração LAN"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Protocolo da inicialização"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Iniciado na inicialização"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "activate now"
-msgstr "Ativo"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "desactivate now"
-msgstr "Ativo"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Você não possui nenhuma conexão à Internet.\n"
-"Crie uma clicando em 'Configurar'"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Configuração da conexão à Internet"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Configuração da conexão à Internet"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Tipo de conexão: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parâmetros"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Placa Ethernet"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Bem-vindo à Crackers"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Pobre"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranóico"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Esse nível deve ser usado com cuidado. Ele faz o seu sistema mais fácil de "
-"usar,\n"
-"mas muito sensível: ele não deve ser usado em uma máquina conectada a "
-"outros\n"
-"ou à internet. Não existe acesso por senha."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"As senhas agora estão ativadas, mas o uso como computador de rede ainda não "
-"é recomendado."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Algumas melhoras para esse nível de segurança, a principal é que existem\n"
-"mais avisos e testes de segurança."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Esse é a segurança padrão recomendada para um computador que será usado\n"
-"para se conectar à Internet como um cliente. Agora existe checagens de "
-"segurança. "
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Com esse nível de segurança, o uso desse sistema como um servidor se tornou "
-"possível.\n"
-"A segurança agora está alta o suficiente para usar o sistema como um "
-"servidor\n"
-"que aceita conexão de muitos clientes. "
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Nós colocamos características nível 4, mas agora o sistema está totalmente "
-"fechado.\n"
-"As características de segurança estão no máximo."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "Opções do nível de segurança"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Escolha as opções do server"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Opções do nível de segurança"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centro de Controle"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Escolha a ferramente que você quer usar"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "utilização: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Você quer que o BackSpace retorne o Delete no console?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Mudar Cd-Rom"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Favor inserir o Cd-Rom de instalação no seu drive e pressionar em Ok.\n"
-"Se você não o tiver, pressione em Cancelar para sair da atualização on-line."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Incapaz de iniciar a atualização on-line!!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "nenhum usb_serial encontrado\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Deseja emulação de 3 botões?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Configuração de Firewall"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Configuração de Firewall"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Você já tem um firewall configurado.\n"
-"Clique em configurar para alterar ou remover o firewall"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Clique em configurar para criar um firewall padrão"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Escolha seu idioma"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Selecione a classe da instalação"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detecção de discos rigidos"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configurar mouse"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Escolha seu teclado"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Segurança"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Setup dos sistemas de arquivos"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatar partições"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Escolha pacotes a serem instalados"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalar sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Adicionar um usuário"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configurar rede"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configurar serviços"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Criar um disco de inicialização"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Instalar gerenciador de inicialização"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configurar X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Sair da instalação"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"configurador pequenoFirewall\n"
-"\n"
-"Isso configura um firewall pessoal para essa máquina Mandrake Linux.\n"
-"Para um firewall dedicado potente, favor procurar a distribuição\n"
-"especilizada MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Agora lhe perguntaremos sobre qual serviços você gostaria de permitir\n"
-"a Internet se conectar. Por favor, pense cuidadosamente sobre essas\n"
-"perguntas, já que a segurança do seu computador é importante.\n"
-"\n"
-"Atenção, se você não estiver usando um desses serviços, retire o firewall "
-"dele. Você pode alterar essa configuração a qualquer hora,\n"
-"basta re-executar esse aplicativo!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Você está executando um servidor web nesta máquina que você precisa\n"
-"que toda a Internet veja? Se você estiver executando um servidor web que\n"
-"precisa ser acessado por esta máquina apenas, favor responder NÃO aqui.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Você está executando um servidor de nome nesta máquina? Se você não\n"
-"configurou um que dê a sua informação de zona e IP para toda a Internet,\n"
-"favor responder não.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Você quer permitir receber conexões Secure Shell (ssh)? Isso é um\n"
-"substituto da telnet que você pode usar para login. Se você estiver\n"
-"usando telnet agora, você deveria mudar definitivamente para ssh. telnet\n"
-"não é codificada -- então alguns agressores podem roubar sua senha.\n"
-"ssh é codificada e não permite esse tipo de roubo."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Você quer permitir receber conexões telnet?\n"
-"Isso é terrivelmente inseguro, como explicado na tela anterior. Nós\n"
-"fortemente recomendamos responder Não aqui e utilizar ssh no lugar\n"
-"da telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Você está executando um servidor FTP que precisa ser acessível pela\n"
-"Internet? Se você estiver, nós realmente recomendamos que você user\n"
-"apenas para transferências anônimas. Qualquer senha enviada por FTP pode\n"
-"ser roubada por invasores, desde que FTP não usa codificação de senhas.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Você está executando um servidor de mensagens aqui? Se você esiver\n"
-"mando mensagens pelo pine, mutt ou qualquer outro cliente de texto,\n"
-"você provavelmente está. Caso contrário, você deve retirar o firewall dele.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Você está executando um servidor POP ou IMAP aqui? Ele seria\n"
-"utilizado para hospedar contas não baseadas na web para\n"
-"pessoas através desta máquina.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Você parece estar utilizando um kernel 2.2. Se seu número IP\n"
-"for automaticamente dado por um computador em sua casa ou \n"
-"escritório (determinado dinamicamente), nós precisamos permitir\n"
-"isso. É esse o caso?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"O seu computador está sincronizando a hora com outro computador?\n"
-"Normalmente, isso é utilizado por organizações Unix/Linux médias-grandes\n"
-"para sincronizar o tempo para relatório, etc. Se você não for\n"
-"parte de uma grande empresa ou nunca ouviu sobre isso, você \n"
-"provalvemente não está."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Configuração completa. Essas alterações podem ser gravadas no disco?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Não foi possível abrir %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Erro arbindo %s para gravação: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Servidor, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Computador de rede (cliente)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Servidor NFS, servidor SMB, servidor Proxy, servidor SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Escritório"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Estação de Trabalho Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Ferramentas para o seu Palm Pilot e seu Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Estação de Trabalho"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Servidor, Firewall/Roteador"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Nome do Domínio e Servidor de Informação da Rede"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programas de escritório: processadores de texto (kword, abiword), tabelas "
-"(kspread, gnumeric), visualizadores pdf, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-"Ferramentas relacionadas à áudio: tocadores de mp3 ou midi, mixers, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Livros e Howto's sobre Linux e Software Livre"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Estação de Trabalho KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimídia - Vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Conjunto de ferramentas para mensagens, notícias, web, transferências de "
-"arquivos e bate-papo"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Servidor, Bancos de dados"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Servidor de banco de dados PostgreSQL ou MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Ferramentas para facilitar a configuração do seu computador"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimídia - Som"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilitários"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentação"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Ferramentas do Console"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Servidor de mensagens postfiz, servidor de notícias Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Estação de Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Estação de Multimídia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Configuração LAN"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Mais Desktops Gráficos (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"O K Desktop Environment, o ambiente gráfico básico acompanhando de uma "
-"coleção de ferramentas"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ambiente Gráfico"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Desenvolvimento"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache e Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Ferramentas para criar e gravar CD's"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Estação de Trabalho de Escritório"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programas gráficos como o The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Bibliotecas de desenvolvimento C e C++, programas e arquivos include"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Servidor de Rede"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Servidor, Correio/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Estação de Jogos"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Editor e visualizadores de Vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimídia - Gráficos"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programas de divertimento: arcade, estratégia, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Conjunto de ferramentas para ler e enviar mensagem e notícias (pine, mutt, "
-"tin...) e para navegar na Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arquivamento, emuladores, monitoramento"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finança Pessoal"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Um ambiente gráfico com um conjunto de aplicativos e ferramenas de desktop "
-"amigáveis"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clientes para protocolos diferentes incluindo ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet Gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programas editores/tocadores de som e vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Outros Desktops Gráficos"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editores, shells, ferramentas de arquivos, terminais"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programas para gerenciar seu dinheiro, como o gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Jogos"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Gereciador de Informação Pessoal"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimídia - Gravação de CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Estação de Trabalho Científica"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "não foi possível abrir /etc/sysconfig/autologin para leitura: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Você quer reiniciar a rede"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Você concorda?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Eu irei reiniciar o dispositivo de rede:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Eu reiniciarei o dispositivo de rede %s. Você concorda?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "A não ser que você saiba especificamente o contrário, a escolha comum é\n"
-#~ "\"/dev/hda\" (disco IDE mestre do canal primário) ou \"/dev/sda"
-#~ "\"  (primeiro disco SCSI)."
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Aqui estão as filas de impressão.\n"
-#~ "Você pode adicionar mais ou modificar as existentes."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Tipo de conexão: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Escolha o usuário:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Favor testar o mouse"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "Favor escolher seu idioma preferido para a instalação e utilização do "
-#~ "sistema"
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Você precisa aceitar os termos da licença acima para continuar a "
-#~ "instalação.\n"
-#~ "\n"
-#~ "\n"
-#~ "Favor clicar em \"Aceitar\" se você concordar com ela.\n"
-#~ "\n"
-#~ "\n"
-#~ "Favor clicar em \"Recusar\" se você não concorda com ela. A instalação "
-#~ "será cancelada sem modificar a sua configuração\n"
-#~ "atual."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr ""
-#~ "Escolha o tipo de layout correspondente ao seu teclado na lista acima"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Se você desejar, outros idiomas (além do que você escolheu\n"
-#~ "no início da instalação) estarão disponíveis após a instalação, favor "
-#~ "escolhê-los\n"
-#~ "na lista acima. Se você quiser todos, você precisa apenas selecionas "
-#~ "\"Todos\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Selecione:\n"
-#~ "\n"
-#~ "  - Personalizado: Se você já está familiarizado com o GNU/Linux, você "
-#~ "poderá escolher\n"
-#~ "    a utilização primária de sua máquina. Veja abaixo para detalhes.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: Se você é fluente com o GNU/Linux e quer fazer uma\n"
-#~ "    instalação altamente personalizada. Como na classe de instalação "
-#~ "\"Personalizado\",\n"
-#~ "    você poderá escolher a utilização do seu sistema.\n"
-#~ "    Mas por favor, NÃO ESCOLHA ESSE A NÃO SER QUE VOCÊ SAIBA O QUE VOCÊ "
-#~ "ESTÁ FAZENDO!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Você agora deve definir a utilização de sua máquina. As escolhas são:\n"
-#~ "\n"
-#~ "* Estação de Trabalho: essa é a escolha idel se você pretende usar sua "
-#~ "máquina basicamente para uso diário, no\n"
-#~ "  escritório ou em casa.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Desenvolvimento: se você pretense usar sua máquina primariamente para "
-#~ "desenvolver software, essa é uma boa escolha.\n"
-#~ "  Você terá instalado todo os softwares necessários para se compilar, "
-#~ "debugar e editar código fonte,\n"
-#~ "  ou criar pacotes de software.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Servidor: se você pretende usar essa máquina como servidor, essa é uma "
-#~ "boa escolha. Tanto como servidor de\n"
-#~ "  arquivos (NFS ou SMB), de impressão (estilo Unix ou Microsoft Windows), "
-#~ "um servidor de autenticação (NIS), um\n"
-#~ "  banco de dados e assim por diante. Como tal, não espere que acessórios "
-#~ "(KDE, GNOME, etc) sejam instalados."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Você pode selecionar o grupo de pacotes que você\n"
-#~ "desejar instalar ou atualizar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Então, DrakX verificará se você tem espaço suficientes para instalá-los."
-#~ "Se não,\n"
-#~ "você será avisado. Se você quiser continuar, você poderá proceder para a\n"
-#~ "instalação de todos os grupos selecionados mas alguns grupos de menor\n"
-#~ "interesse não serão instalados. No fim da lista você pode selecionar \n"
-#~ "a opção \"Seleção individual de pacotes\"; nesse caso você poderá "
-#~ "navegar\n"
-#~ "entre mais de 1000 pacotes..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Você agora pode selecionar individualmente todos os\n"
-#~ "pacotes que você deseja instalar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Você pode expandir ou colapsar a árvore clicando na opção no canto "
-#~ "esquerdo da\n"
-#~ "janelas de pacotes.\n"
-#~ "\n"
-#~ "\n"
-#~ "Se você quiser ver os pacotes em ordem alfabética, clique no ícone\n"
-#~ "\"Ativar"
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Se você tiver todos os CDs da lista acima, clique em Ok. Se você\n"
-#~ "não tiver nenhum desses CDs, clique em Cancelar. Se apenas alguns CDs "
-#~ "estiverem,\n"
-#~ "faltando, desmarque-os e então clique em Ok."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Se você deseja conectar seu computador à Internet ou\n"
-#~ "à uma rede local, escolha a opção correta. Favor ativar o seu dispositivo "
-#~ "antes\n"
-#~ "de escolher a opção correta de deixar o DrakX detectá-lo "
-#~ "automaticamente.\n"
-#~ "\n"
-#~ "\n"
-#~ "Se você não tiver nenhuma conexão à Internet ou a uma rede local, "
-#~ "escolha\n"
-#~ "\"Desabilitar rede\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Se você deseja configurar sua rede depois da instalação ou se você tiver "
-#~ "terminado\n"
-#~ "de configurar sua conexão à rede, escolha \"Pronto\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Nenum modem foi detectado. Favor escolher a porta serial em que seu modem "
-#~ "está conectado.\n"
-#~ "\n"
-#~ "\n"
-#~ "Nota, a primeira porta serial (chamada \"COM1\" no Microsoft Windows)\n"
-#~ "é chamada \"ttyS0\" no Linux."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Você pode agora configurar a rede dialup. Se você\n"
-#~ "não sabe ou não tem certeza sobre o que colocar, as informações corretas "
-#~ "podem\n"
-#~ "ser obtidas com o seu Provedor de Intenet. Se você não digitar o DNS \n"
-#~ "(nome do servidor) aqui, essa informação será obtida com o seu Provedor "
-#~ "de Internet\n"
-#~ "na hora da conexão."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Se o seu modem for um modem externo, favor ligá-lo agora para deixar "
-#~ "odetectá-lo automaticamente."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Favor ligar o seu modem e escolha o correto."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Se você não tem certeza se as informações acima\n"
-#~ "estão corretas ou se você não sabe ou não tem certeza sobre o que "
-#~ "colocar,\n"
-#~ "as informações corretas podem ser obtidas com o seu Provedor de Internet. "
-#~ "Se você\n"
-#~ "não digitar o DNS (nome do servidor) aqui, essa informação será obtida "
-#~ "com o seu\n"
-#~ "Provedor de Internet na hora da conexão."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Agora você pode entrar com o nome do host, se necessário. Se você\n"
-#~ "não tem certeza sobre o que colocar, a informação correta pode ser "
-#~ "obtida\n"
-#~ "com o seu provedor."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Você pode agora configurar seu dispositivo de rede:\n"
-#~ "\n"
-#~ "   * Endereço IP: se você não saber qual é, pergunte ao administrador da "
-#~ "rede.\n"
-#~ "     Você não pode entrar com um número IP se você selecionar a opção "
-#~ "\"IP Automático\" abaixo.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" é normalmente uma boa escolha. Se você "
-#~ "não tem certeza sobre o que colocar,\n"
-#~ "     pergunte ao administrador da rede.\n"
-#~ "\n"
-#~ "   * IP Automático: se sua rede usa o protocolo BOOTP ou DHCP, selecione "
-#~ "essa opção. Se selecionada, nenhum valor é necessário em \n"
-#~ "    \"Endereço IP\". Se você não tem certeza se deve selecionar essa "
-#~ "opção, pergunte ao administrador de rede."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Você pode agora colocar o nome do seu host, se necessário.\n"
-#~ " Se você não sabe sobre o que colocar, pergunte ao administrador da rede."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Você pode agora colocar o nome do host, se necessário.\n"
-#~ "Se você não sabe ou não ter certeza, deixe em branco."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Agora você pode entrar com as opções dialup. Se você não tem certeza "
-#~ "sobre\n"
-#~ "o que colocar, a informação correta pode ser obtida com o seu provedor."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Se você irá usar proxies, favor configurá-los agora. Se você não sabe se\n"
-#~ "irá usar proxies, pergunte ao seu administrador de rede ou ao seu "
-#~ "provedor."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Você pode instalar o pacote criptográfico se sua conexão com a internet "
-#~ "foi\n"
-#~ "configurada corretamente. Primeiro, escolha um espelho de onde você "
-#~ "deseja fazer\n"
-#~ "o download dos pacotes e após isso, selecione os pacotes a serem "
-#~ "instalados.\n"
-#~ " \n"
-#~ "\n"
-#~ "Note que você deve escolher o mirror (espelho) e pacotes criptográfico "
-#~ "de\n"
-#~ "acordo com a sua legislação."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr ""
-#~ "Você agora pode escolher seu fuso horário de acordo com onde você vive"
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Você pode configurar uma impressora local (conectada ao seu computador),\n"
-#~ "ou remota (acessível via uma rede Unix, Netware ou Microsoft Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Se você quer estar capaz de imprimir, favor escolher um sistema de "
-#~ "impressão\n"
-#~ "entre o CUPS e o LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS é um novo, poderoso e flexível sistema de impressão para sistema "
-#~ "UNIX\n"
-#~ "(CUPS significa \"Common Unix Printing System\"). Esse é o sistema de "
-#~ "impressão\n"
-#~ "padrão do Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR é um velho sistema de impressão usado em antigas distribuições "
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "Se você não tem nenhuma impressora, clique em \"Nenhuma\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux pode lidar com vários tipos de impressoras. Cada uma requer "
-#~ "uma\n"
-#~ "configuração diferente.\n"
-#~ "\n"
-#~ "\n"
-#~ "Se sua impressora é fisicamente conectada ao seu computador, selecione\n"
-#~ "impressora \"Local\n"
-#~ "\n"
-#~ "\n"
-#~ "Se você deseja acessar uma impressora localizada em uma máquina Unix "
-#~ "remota,\n"
-#~ "selecione \"Impressora Remota\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Se você deseja acessar uma impressora localizada em uma máquina Microsoft "
-#~ "Windows\n"
-#~ "remota (ou uma máquina Unix usando protocolo SMB), selecione \"SMB/"
-#~ "Windows95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Favor ligar a sua impressora antes de deixar o DrakX tentar detectá-la.\n"
-#~ "\n"
-#~ "Você tem que colocar algumas informações aqui.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nome da impressora: o spooler de impressão usa \"lp\" como o nome "
-#~ "padrão.Então, você tem que ter uma impressora chamada\n"
-#~ "     \"lp\". Se você tem apenas uma impressora, você pode usar vários "
-#~ "nomespara ela. Você precisa apenas separá-los por um\n"
-#~ "     caractere pipe (um \"|\"). Então, se você preferir um nome mais "
-#~ "significante, você tem que colocá-lo primeiro,\n"
-#~ "     ex: \"Minha impressora|lp\". A impressora com o nome \"lp\" será a "
-#~ "impressora padrão.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Descrição: esse é opcional, mas pode ser útil se várias impressoras "
-#~ "estão conectadas ao seu computador ou se\n"
-#~ "     você permite que outros computadores acessem essa impressora.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Localização: se você quiser colocar alguma informação sobre a\n"
-#~ "     localização da impressora, coloque aqui (você pode escrever o que\n"
-#~ "     quiser, por exemplo \"Segundo andar\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Você precisa colocar algumas informações aqui.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nome da fila: o spooler de impressão usa \"lp\" como o nome padrão."
-#~ "Então, você tem que ter uma impressora chamada\n"
-#~ "     \"lp\". Se você tem apenas uma impressora, você pode usar vários "
-#~ "nomespara ela. Você precisa apenas separá-los por um\n"
-#~ "     caractere pipe (um \"|\"). Então, se você preferir um nome mais "
-#~ "significante, você tem que colocá-lo primeiro,\n"
-#~ "     ex: \"Minha impressora|lp\". A impressora com o nome \"lp\" será a "
-#~ "impressora padrão.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Diretório spool: é o diretório onde os trabalhos de impressão são "
-#~ "armazenados. Mantenha a\n"
-#~ "     escolha padrão se você não sabe o que usar\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Conexão da impressora: Se sua impressora estiver conectada "
-#~ "fisicamente ao seu computador, escolha \"Impressora\n"
-#~ "     Local\". Se você quiser acessar um impressora conectada a uma "
-#~ "máquina Unix remota, escolha \"Impressora ldp remota\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Se você quiser acessar uma impressora localizada em uma máquina "
-#~ "Microsoft Windows remota (ou UNIX usando o protocolo\n"
-#~ "     SMB), selecione \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Se você quiser accear uma impressora localizada em uma rede Netware, "
-#~ "selecione \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Sua impressora não foi detectada. Favor digitar o nome do dispositivo a\n"
-#~ "qual está conectada.\n"
-#~ "\n"
-#~ "\n"
-#~ "Nota, a maioria das impressoras estão conectadas à primeira porta "
-#~ "paralela.\n"
-#~ "Ela é chamada \"/dev/lp0\" no GNU/Linux e \"LPT1\" no MicrosoftWindows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Você agora deve selecionar sua impressora da lista acima."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Favor selecionar as opções corretas de acordo com a sua impressora.\n"
-#~ "Favor verificar a documentação dela se você não sabe o que escolher "
-#~ "aqui.\n"
-#~ "\n"
-#~ "\n"
-#~ "Você poderá testar a sua configuração no próximo passo e você será capaz "
-#~ "de modificá-la se não estiver funcionando do jeito que você quer."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Agora você deve entrar com a senha root do seu sistema Mandrake Linux.\n"
-#~ "A senha deve ser digitada duas vezes para verificar se as senhas\n"
-#~ "digitadas são idênticas.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root é o administrador do sistema, e é o único usuário que pode "
-#~ "modificar\n"
-#~ "a\n"
-#~ "configuração do sistema. Então escolha a senha com cuidado\n"
-#~ "Uso não-autorizado da conta root pode ser extremamente perigoso\n"
-#~ "à integridade\n"
-#~ "do sistema e seus dados, e outros sitemas conectados a ele.\n"
-#~ "\n"
-#~ "\n"
-#~ "A senha deve ser uma mistura de caracteres alfa-numéricos com no mínimo "
-#~ "8\n"
-#~ "caracteres. Ela nunca deve ser anotada.\n"
-#~ "\n"
-#~ "\n"
-#~ "Não faça a senha muito grande ou muito complicada, você tem que ser "
-#~ "capaz\n"
-#~ "de lembrar dela sem muita dificuldade."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Agora você pode criar uma ou mais contas de usuários \"regulares\"\n"
-#~ "que são opostas à conta \"privilégiada\" do root. Você pode criar uma\n"
-#~ "ou mais contas para cada pessoa que você quer permitir usar esse\n"
-#~ "computador. Note que cada conta de usuário tem suas próprias "
-#~ "preferências\n"
-#~ "(ambiente gráfico, configuração de progrmas, etc.) e seu próprio\n"
-#~ "\"diretório home\" que é o local onde essas preferências irão ser\n"
-#~ "guardadas.\n"
-#~ "\n"
-#~ "\n"
-#~ "Em primeiro lugar, crie uma conta para você mesmo! Mesmo que você seja o "
-#~ "único usuário\n"
-#~ "da máquina, você NÃO pode se conectar como root no uso diário desse "
-#~ "sistema:\n"
-#~ "é um risco muito grande. Deixar o sistema defeituoso pode ser causado por "
-#~ "erro de digitação\n"
-#~ "\n"
-#~ "\n"
-#~ "Além do mais, você deve se conectar ao sistema usando a conta de usuário\n"
-#~ "que você criou aqui, e se logar como root somente para propósitos de\n"
-#~ "manutenção e administração."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "A criação de um disco de inicialização é altamente recomendada.\n"
-#~ "Se você não conseguir inicializar o seu computador, é a única maneira\n"
-#~ "de resgatar o seu sistema sem ter que reinstalá-lo."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "As principais opções do LILO e do grub são:\n"
-#~ "  - Dispositivo de boot: Indica o nome do dispositivo (ex.: uma partição\n"
-#~ "do disco rígido) que contém o setor de boot. A não ser que você saiba\n"
-#~ "exatamente o que está fazendo, escolha \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Tempo de espera antes do boot padrão: Especifica o tempo em décimos\n"
-#~ "de segundo que o gerenciador de inicialização deve esperar antes de "
-#~ "entrar\n"
-#~ "na imagem padrão. Isso é útil em sistemas que fazem o boot imediato do\n"
-#~ "disco rígido depois de ativar o teclado. O gerenciador de inicialização "
-#~ "não\n"
-#~ "esperará se  \"delay\" for omitido ou com o valor zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Modo do vídeo: Isso especifica o modo de texto VGA que deve ser\n"
-#~ "selecionado durante o boot. Os seguintes valores são disponíveis: \n"
-#~ "\n"
-#~ "    * normal: seleciona o modo de texto normal 80x25.\n"
-#~ "\n"
-#~ "    * <número>: usa o modo de texto correspondente.\n"
-#~ "\n"
-#~ "  - Limpar \"/tmp\" a cada inicialização: se você quiser apagar todos os "
-#~ "arquivos\n"
-#~ "e diretórios em \"/tmp\" quando iniciar o sistema, marque essa opção.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Especificar RAM se necessário: infelizmente, não existe um método "
-#~ "padrão\n"
-#~ "para perguntar o BIOS a RAM existente no seu computador. Como "
-#~ "consequência, o Linux\n"
-#~ "pode falhar na detecção correta da RAM. Se esse for o caso, você pode\n"
-#~ "especificar a quantidade correta de RAM. Note que uma diferença de 2 ou "
-#~ "4\n"
-#~ "MB entre a RAM detectada e a existente no seu sistema é normal."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO é um gerenciado de boot para SPAR: é capaz de\n"
-#~ "de inicializar tanto no GNU/Linux quanto qualquer outro sistema\n"
-#~ "operacional instalado. Normalmente, esses sistemas são detectados e\n"
-#~ "instalados corretamente. Se esse não for o caso, você pode adicionar\n"
-#~ "entradas manualmente nessa tela. Cuidado ao escolher os parâmetros "
-#~ "corretos.\n"
-#~ "\n"
-#~ "\n"
-#~ "Você pode também não dar acesso a esses sistemas operacionais para\n"
-#~ "ninguém, na qual você pode deletar as entradas correspondentes. Mas "
-#~ "nesse\n"
-#~ "caso, você precisará de um disco de inicialização para poder utilizá-los!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "As principais opções do SILO são:\n"
-#~ "  - Instalação do gerenciador de inicialização: Indicar aonde você quer\n"
-#~ "colocar a informação requerida para entrar no GNU/Linux. A não ser que\n"
-#~ "você saiba o que faz, escolha \"Primeiro setor do drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Tempo de espera antes do boot padrão: Especifica o tempo em décimos\n"
-#~ "de segundo que o gerenciador de inicialização deve esperar antes de "
-#~ "entrar\n"
-#~ "na primeira imagem. Isso é util em sistema que fazem a inicialização\n"
-#~ "imediata do disco rígido antes de ativar o teclado. O gerenciador de\n"
-#~ "inicialização não irá esperar se  \"delay\" estiver omitido ou com o\n"
-#~ "valor zero."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Agora é hora de configurar o Sistema de Janelas X, que é o centro\n"
-#~ "da Interface Gráfica do GNU/Linux (Linux GUI). Para isso, você deve\n"
-#~ "configurar sua placa de vídeo e monitor. A maioria desses passos\n"
-#~ "são automáticos, pode ser que o seu trabalho seja o de apenas\n"
-#~ "verificar o que foi feito e aceitar as configurações :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Quando a configuração acabar, o X será reiniciado (a não ser que\n"
-#~ "peça ao Drakx para não fazê-lo) para você checar e ver se\n"
-#~ "a configuração estão corretas. Se ela não servir, você pode voltar\n"
-#~ "e mudá-las, quantas vezes for necessário."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Se algo estiver errado na configuração do X, use essas opções para "
-#~ "configurar\n"
-#~ "corretamento o Sistema de Janelas X."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Se você quiser usar o login gráfico, selecione \"Sim\". Caso contrário,\n"
-#~ "escolha \"Não\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Você pode escolher o nível de segurança do seu sistema. Favor olhar o "
-#~ "manual para mais\n"
-#~ "  informações. Basicamente, se você não sabe qual escolher, mantenha a "
-#~ "opção padrão.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Seu sistema será reinicializado.\n"
-#~ "\n"
-#~ "Após reiniciar, seu novo sistema Mandrake Linux se inicializará "
-#~ "automatica-\n"
-#~ "mente. Se você quiser entrar em outro sistema operacional existente,\n"
-#~ "favor ler as instruções adicionais."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Tcheco (Programadores)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Eslováqui (Programadores)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Nome do perfil a ser criado:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Gravar /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "Restaurar do arquivo"
-
-#~ msgid "Save in file"
-#~ msgstr "Salvar no arquivo"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Restaurar do disquete"
-
-#~ msgid "Format all"
-#~ msgstr "Formatar tudo"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Após formatar todas as partições,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "todos os dados nessas partições serão perdidos"
-
-#~ msgid "Reload"
-#~ msgstr "Atualizar"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Você quer criar um disquete de instalação automatição para replicação do "
-#~ "linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Configuração ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Com um servidor CUPS remoto, você não tem que configurar\n"
-#~ "nenhuma impressora aqui; elas serão detectadas automaticamente\n"
-#~ "a não ser que você tenha um servidor em uma rede diferente;\n"
-#~ "nesse último caso, você tem que dar o endereço IP do\n"
-#~ "servidor CUPS e opcionalmente o número da porta."
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Fila remota"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Nome do domínio"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Nenhuma impressora"
-
-#, fuzzy
-#~ msgid "start it"
-#~ msgstr "restrito"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Monitoramento da Rede"
-
-#~ msgid "Profile "
-#~ msgstr "Perfil "
-
-#~ msgid "Statistics"
-#~ msgstr "Estatísticas"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Velocidade de envio: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Velocidade de recebimento: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Tipo de conexão: "
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Conectando à Internet"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Desconectando da Internet"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Não foi possível desconectar."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Desconectado da Internet"
-
-#~ msgid "Connection complete."
-#~ msgstr "Conexão completada."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "A conexão falhou:\n"
-#~ "Verifique a sua configuração no Centro de Controle Mandrake."
-
-#, fuzzy
-#~ msgid "Color configuration"
-#~ msgstr "Configuração"
-
-#~ msgid "sent: "
-#~ msgstr "enviados: "
-
-#~ msgid "received: "
-#~ msgstr "recebidos: "
-
-#~ msgid "Connect"
-#~ msgstr "Conectar"
-
-#~ msgid "Disconnect"
-#~ msgstr "Desconectar"
-
-#~ msgid "/File/_New"
-#~ msgstr "/Arquivo/_Novo"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>A"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/Arquivo/_Abrir"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>A"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/Arquivo/_Salvar"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/Arquivo/Salvar _Como"
-
-#~ msgid "/File/-"
-#~ msgstr "/Arquivo/-"
-
-#~ msgid "/_Options"
-#~ msgstr "/_Opções"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/Opções/Teste"
-
-#~ msgid "/_Help"
-#~ msgstr "/Aj_uda"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/Ajuda/_Sobre"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Default"
-
-#~ msgid "Europe"
-#~ msgstr "Europa"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "Fila remota"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "O conteúdo do arquivo de configuração não pode ser interpretado."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Arquivo de configuração irreconhecível"
-
-#~ msgid "Adapter"
-#~ msgstr "Adaptador"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "Desativar"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Ativar"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Você agora pode testar seu mouse. Use os botões e a roda para\n"
-#~ "verificar se as configurações estão boas. Se não estiverem, você pode "
-#~ "clicar\n"
-#~ "em \"Cancelar\" e escolher outro driver."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Conexão DSL (ou ADSL)"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Fechar"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Você pode diretamente especificar o URI para acessar a impressora com CUPS"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Sim, imprimir página de teste ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Sim, imprimir página de teste PostScript"
-
-#~ msgid "Paper Size"
-#~ msgstr "Tamanho do Papel"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Ejetar página após a impressão?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Opções do driver Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Opções do número de cores"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Imprimir texto como PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Corrigir texto stair-stepping?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Número de páginas conforme páginas de saída"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Margem Direita/Esquerda em pontos (1/72 de polegada)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Margem Superior/Inferior em pontos (1/72 de polegada)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Opções extras de GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Opções extras de Texto"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Inverter a ordem das páginas"
-
-#~ msgid "CUPS starting"
-#~ msgstr "Iniciando CUPS"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Selecionar coneção da impressora remote"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Cada impressora precisa de um nome (por exemplo\n"
-#~ "lp). Outros parâmetros, tal como a descrição da impressora ou sua\n"
-#~ "localização pode ser definida. Qual nome deve ser usado para essa\n"
-#~ "impressora e como a impressora está conectada?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Cada fila de impressão (a qual as impressões são direcionadas) precisa\n"
-#~ "de um nome (normalmente lp) e de um diretório spoll associado a ela.\n"
-#~ "Qual o nome e diretório deve ser utilizado para esta fila e como a "
-#~ "impressora está conectada?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nome da fila de impressão"
-
-#~ msgid "Spool directory"
-#~ msgstr "Diretório spool"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Para ter um sistema mais segura, você deve escolher \"Usar arquivo shadow"
-#~ "\"\n"
-#~ "e \"Usar senhas MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Se sua rede usa NIS, selecione \"Usar NIS\". Se você não sabe, pergunte\n"
-#~ "ao seu administrador de rede."
-
-#~ msgid "yellow pages"
-#~ msgstr "páginas amarela"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Configuração LAN"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1 do provedor"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2 do provedor"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Como você quer se conectar à Internet?"
diff --git a/perl-install/share/po/ro.po b/perl-install/share/po/ro.po
deleted file mode 100644
index 0e9aad8bb..000000000
--- a/perl-install/share/po/ro.po
+++ /dev/null
@@ -1,8787 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (c) 2000 MandrakeSoft
-# Florin Grad <florin@mandrakesoft.com>, 1999-2000
-# Dragos Marian Barbu <dragosb@softhome.net>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX 7.1\n"
-"POT-Creation-Date: 2001-06-02 17:16+0200\n"
-"PO-Revision-Date: 2000-04-30 2:55+0200\n"
-"Last-Translator: Florin Grad <florin@mandrakesoft.com>\n"
-"Language-Team: romanian\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Configure all heads independantly"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:233
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:236
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:239
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "Citirea configuraþiei"
-
-#: ../../Xconfigurator.pm_.c:240
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Graphic card"
-msgstr "Carte graficã"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Select a graphic card"
-msgstr "Alegeþi o carte graficã"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "Choose a X server"
-msgstr "Alegeþi un server X"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "X server"
-msgstr "Server X"
-
-#: ../../Xconfigurator.pm_.c:309 ../../Xconfigurator.pm_.c:316
-#: ../../Xconfigurator.pm_.c:366
-#, fuzzy, c-format
-msgid "XFree %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:312
-#, fuzzy
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Ce tip de intrãri doriþi sã adãugaþi ?"
-
-#: ../../Xconfigurator.pm_.c:324
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:326 ../../Xconfigurator.pm_.c:359
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:328 ../../Xconfigurator.pm_.c:361
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:336 ../../Xconfigurator.pm_.c:350
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:338 ../../Xconfigurator.pm_.c:352
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:371
-#, fuzzy
-msgid "XFree configuration"
-msgstr "Configuraþie post-install"
-
-#: ../../Xconfigurator.pm_.c:416
-msgid "Select the memory size of your graphic card"
-msgstr "Alegeþi memoria pentru cartea graficã"
-
-#: ../../Xconfigurator.pm_.c:463
-msgid "Choose options for server"
-msgstr "Alegeþi opþiunile pentru server"
-
-#: ../../Xconfigurator.pm_.c:480
-msgid "Choose a monitor"
-msgstr "Alegeþi un  monitor"
-
-#: ../../Xconfigurator.pm_.c:480
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:483
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Cei doi parametri critici sunt rata de actualizare verticalã, care este "
-"rata\n"
-"la care întregul ecran e actualizat ºi mai important rata de sincronizare\n"
-"orizontalã, care este rata la care liniile de scan sunt afiºate.\n"
-"Este FOARTE IMPORTANT sã nu specificaþi un tip de monitor cu interval de\n"
-"sincronizare care depãºeºte capabilitãþile monitorului vostru: puteþi\n"
-"distruge monitorul în acest fel.\n"
-"Dacã nu sunteþi sigur, alegeþi parametri conservativi."
-
-#: ../../Xconfigurator.pm_.c:490
-msgid "Horizontal refresh rate"
-msgstr "Rata de actualizare orizontalã"
-
-#: ../../Xconfigurator.pm_.c:491
-msgid "Vertical refresh rate"
-msgstr "Rata de actualizare verticalã"
-
-#: ../../Xconfigurator.pm_.c:528
-msgid "Monitor not configured"
-msgstr "Monitor nu a fost încã configurat"
-
-#: ../../Xconfigurator.pm_.c:531
-msgid "Graphic card not configured yet"
-msgstr "Cartea graficã nu a fost configuratã încã"
-
-#: ../../Xconfigurator.pm_.c:534
-msgid "Resolutions not chosen yet"
-msgstr "Rezoluþia nu a fost încã aleasã"
-
-#: ../../Xconfigurator.pm_.c:551
-msgid "Do you want to test the configuration?"
-msgstr "Doriþi sã testaþi configuraþia ?"
-
-#: ../../Xconfigurator.pm_.c:555
-#, fuzzy
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Atenþie: testul e periculos pentru aceastã carte graficã"
-
-#: ../../Xconfigurator.pm_.c:558
-msgid "Test of the configuration"
-msgstr "Test de configuraþie"
-
-#: ../../Xconfigurator.pm_.c:597
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"reîncercaþi dupã ce aþi modificat ceva parametri"
-
-#: ../../Xconfigurator.pm_.c:597
-msgid "An error has occurred:"
-msgstr "A apãrut o eroare:"
-
-#: ../../Xconfigurator.pm_.c:619
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Testul se va termina în %d secunde"
-
-#: ../../Xconfigurator.pm_.c:630
-msgid "Is this the correct setting?"
-msgstr "Configuraþia e corectã"
-
-#: ../../Xconfigurator.pm_.c:638
-msgid "An error has occurred, try to change some parameters"
-msgstr "Eroare, reîncercaþi dupã ce aþi modificat ceva parametri"
-
-#: ../../Xconfigurator.pm_.c:684 ../../printerdrake.pm_.c:277
-#: ../../services.pm_.c:125
-msgid "Resolution"
-msgstr "Rezoluþie"
-
-#: ../../Xconfigurator.pm_.c:731
-msgid "Choose the resolution and the color depth"
-msgstr "Alegeþi rezoluþia ºi culorile"
-
-#: ../../Xconfigurator.pm_.c:733
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Carte graficã: %s"
-
-#: ../../Xconfigurator.pm_.c:734
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:750 ../../standalone/draknet_.c:280
-#: ../../standalone/draknet_.c:283
-#, fuzzy
-msgid "Expert Mode"
-msgstr "Expert"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "Show all"
-msgstr "Afiºaþi tot"
-
-#: ../../Xconfigurator.pm_.c:794
-msgid "Resolutions"
-msgstr "Rezoluþii"
-
-#: ../../Xconfigurator.pm_.c:1330
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastatura : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1331
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tip de mouse : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1332
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Periferic pentru mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1333
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1334
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frecvenþa orizontala pentru monitor : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1335
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Frecvenþa verticala pentru monitor : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1336
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Carte graficã : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1337
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memorie graficã : %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1339
-#, fuzzy, c-format
-msgid "Color depth: %s\n"
-msgstr "Opþiuni pentru culori:"
-
-#: ../../Xconfigurator.pm_.c:1340
-#, fuzzy, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezoluþii"
-
-#: ../../Xconfigurator.pm_.c:1342
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Server XFree86 : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1343
-#, fuzzy, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Server XFree86 : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1362
-msgid "Preparing X-Window configuration"
-msgstr "Pregãtesc configuraþia X-Window"
-
-#: ../../Xconfigurator.pm_.c:1382
-msgid "What do you want to do?"
-msgstr "Ce doriþi sã faceþi ?"
-
-#: ../../Xconfigurator.pm_.c:1387
-msgid "Change Monitor"
-msgstr "Alegeþi un alt tip de monitor"
-
-#: ../../Xconfigurator.pm_.c:1388
-msgid "Change Graphic card"
-msgstr "Alegeþi un alt tip de carte graficã"
-
-#: ../../Xconfigurator.pm_.c:1390
-msgid "Change Server options"
-msgstr "Schimbaþi opþiunile server-ului"
-
-#: ../../Xconfigurator.pm_.c:1391
-msgid "Change Resolution"
-msgstr "Alegeþi o altã rezoluþie"
-
-#: ../../Xconfigurator.pm_.c:1392
-msgid "Show information"
-msgstr "Afiºeazã informaþiile"
-
-#: ../../Xconfigurator.pm_.c:1393
-msgid "Test again"
-msgstr "Testeazã din nou"
-
-#: ../../Xconfigurator.pm_.c:1394 ../../bootlook.pm_.c:238
-msgid "Quit"
-msgstr "Ieºire"
-
-#: ../../Xconfigurator.pm_.c:1402
-#, fuzzy, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr "Pastraþi configuraþia IP curentã"
-
-#: ../../Xconfigurator.pm_.c:1423
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Vã rog reconectaþi-vã ca %s pentru a activa schimbãrile"
-
-#: ../../Xconfigurator.pm_.c:1443
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Vã rog delogaþi-vã ºi folosiþi Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1446
-msgid "X at startup"
-msgstr "Sever X la demaraj"
-
-#: ../../Xconfigurator.pm_.c:1447
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Pot sã configurez calculatorul sa demareze automat X la demaraj.\n"
-"Doriþi sa demaraþi X cînd redemaraþi ?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 de culori (8 biþi)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mii de culori (15 biþi)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mii de culori (16 biþi)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milioane de culori (24 biþi)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliarde de culori (32 biþi)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB or more"
-msgstr "16 MB sau mai mult"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 la 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 la 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Compatibil, 1024x768 la 87 Hz întreþesut (nu 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 la 87 Hz întreþesut, 800x600 la 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA Extins, 800x600 la 60 Hz, 640x480 la 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Ne-Întreþesut SVGA, 1024x768 la 60 Hz, 800x600 la 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Înaltã frecvenþã SVGA, 1024x768 la 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frecvenþã care e capabil de 1280x1024 la 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frecvenþã care e capabil de 1280x1024 la 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frecvenþã care e capabil de 1280x1024 la 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor care e capabil de 1600x1200 la 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor care e capabil de 1600x1200 la 76 Hz"
-
-#: ../../any.pm_.c:99 ../../any.pm_.c:124
-msgid "First sector of boot partition"
-msgstr "Primul sector al partiþiei de demaraj"
-
-#: ../../any.pm_.c:99 ../../any.pm_.c:124 ../../any.pm_.c:197
-msgid "First sector of drive (MBR)"
-msgstr "Primul sector al discului (MBR)"
-
-#: ../../any.pm_.c:103
-#, fuzzy
-msgid "SILO Installation"
-msgstr "Instalare LILO/grub"
-
-#: ../../any.pm_.c:104 ../../any.pm_.c:117
-msgid "Where do you want to install the bootloader?"
-msgstr "Unde doriþi sã instalaþi Gestionarul de demaraj ?"
-
-#: ../../any.pm_.c:116
-msgid "LILO/grub Installation"
-msgstr "Instalare LILO/grub"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:142
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:130
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:131 ../../any.pm_.c:142
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:134
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:138
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:140 ../../any.pm_.c:142
-#, fuzzy
-msgid "Yaboot"
-msgstr "Root"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:180
-msgid "Bootloader main options"
-msgstr "Opþiunile principale ale gestionarului de demaraj"
-
-#: ../../any.pm_.c:149 ../../any.pm_.c:181
-#, fuzzy
-msgid "Bootloader to use"
-msgstr "Opþiunile principale ale gestionarului de demaraj"
-
-#: ../../any.pm_.c:151
-#, fuzzy
-msgid "Bootloader installation"
-msgstr "Opþiunile principale ale gestionarului de demaraj"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:183
-msgid "Boot device"
-msgstr "Periferic de demaraj"
-
-#: ../../any.pm_.c:154
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nu funcþioneazã cu BIOS-urile vechi)"
-
-#: ../../any.pm_.c:155
-msgid "Compact"
-msgstr "Compact"
-
-#: ../../any.pm_.c:155
-msgid "compact"
-msgstr "compact"
-
-#: ../../any.pm_.c:156 ../../any.pm_.c:256
-msgid "Video mode"
-msgstr "Mod video"
-
-#: ../../any.pm_.c:158
-msgid "Delay before booting default image"
-msgstr "Timp de aºteptare înaintea demarãrii imaginii standard"
-
-#: ../../any.pm_.c:160 ../../any.pm_.c:741
-#: ../../install_steps_interactive.pm_.c:904 ../../netconnect.pm_.c:629
-#: ../../printerdrake.pm_.c:98 ../../printerdrake.pm_.c:132
-#: ../../standalone/draknet_.c:569
-msgid "Password"
-msgstr "Parola"
-
-#: ../../any.pm_.c:161 ../../any.pm_.c:742
-#: ../../install_steps_interactive.pm_.c:905
-msgid "Password (again)"
-msgstr "Parola (din nou)"
-
-#: ../../any.pm_.c:162
-msgid "Restrict command line options"
-msgstr "Limiteazã opþiunile liniei de comandã"
-
-#: ../../any.pm_.c:162
-msgid "restrict"
-msgstr "limiteazã"
-
-#: ../../any.pm_.c:164
-msgid "Clean /tmp at each boot"
-msgstr "Curãþã /tmp la fiecare demaraj"
-
-#: ../../any.pm_.c:165
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precizeazã cantintatea de  RAM dacã e necesar (am gãsit %d MB)"
-
-#: ../../any.pm_.c:167
-msgid "Enable multi profiles"
-msgstr "Activeazã profilurile multiple"
-
-#: ../../any.pm_.c:171
-msgid "Give the ram size in MB"
-msgstr "Introduceþi cantintatea de RAM în MB"
-
-#: ../../any.pm_.c:173
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Opþiunea ``Limiteazã opþiunile liniei de comandã'' e inutilã fãrã parolã"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:718
-#: ../../install_steps_interactive.pm_.c:899
-msgid "Please try again"
-msgstr "Încercaþi din nou"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:718
-#: ../../install_steps_interactive.pm_.c:899
-msgid "The passwords do not match"
-msgstr "Parolele nu corespund"
-
-#: ../../any.pm_.c:182
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:184
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:185
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:186
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:187
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:188
-#, fuzzy
-msgid "Default OS?"
-msgstr "Standard"
-
-#: ../../any.pm_.c:210
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Acestea sunt diferitele intrãrile.\n"
-"Puteþi sã mai adãugaþi ºi altele sau sã schimbaþi cele existente."
-
-#: ../../any.pm_.c:220 ../../printerdrake.pm_.c:356
-msgid "Add"
-msgstr "Adaugã"
-
-#: ../../any.pm_.c:220 ../../any.pm_.c:729 ../../diskdrake.pm_.c:46
-#: ../../printerdrake.pm_.c:356
-msgid "Done"
-msgstr "Gata"
-
-#: ../../any.pm_.c:220
-#, fuzzy
-msgid "Modify"
-msgstr "Modificã RAID"
-
-#: ../../any.pm_.c:228
-msgid "Which type of entry do you want to add?"
-msgstr "Ce tip de intrãri doriþi sã adãugaþi ?"
-
-#: ../../any.pm_.c:229
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:229
-msgid "Other OS (SunOS...)"
-msgstr "Alt SO (SunOS...)"
-
-#: ../../any.pm_.c:230
-msgid "Other OS (MacOS...)"
-msgstr "Alt SO (MacOS...)"
-
-#: ../../any.pm_.c:230
-msgid "Other OS (windows...)"
-msgstr "Alt SO (windows...)"
-
-#: ../../any.pm_.c:250 ../../any.pm_.c:252
-msgid "Image"
-msgstr "Imagine"
-
-#: ../../any.pm_.c:253 ../../any.pm_.c:264
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:254 ../../any.pm_.c:283
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:258
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:259
-msgid "Read-write"
-msgstr "Citeºte-Scrie"
-
-#: ../../any.pm_.c:266
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:267
-msgid "Unsafe"
-msgstr "Nesigur"
-
-#: ../../any.pm_.c:274 ../../any.pm_.c:279 ../../any.pm_.c:282
-msgid "Label"
-msgstr "Etichetã"
-
-#: ../../any.pm_.c:276 ../../any.pm_.c:287
-msgid "Default"
-msgstr "Standard"
-
-#: ../../any.pm_.c:284
-#, fuzzy
-msgid "Initrd-size"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:286
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:294
-msgid "Remove entry"
-msgstr "ªterge intrarea"
-
-#: ../../any.pm_.c:297
-msgid "Empty label not allowed"
-msgstr "Eticheta goalã nu e permisã"
-
-#: ../../any.pm_.c:298
-msgid "This label is already used"
-msgstr "Aceastã etichetã nu e permisã"
-
-#: ../../any.pm_.c:317
-#, fuzzy
-msgid "What type of partitioning?"
-msgstr "Ce tip de imprimanta aveþi?"
-
-#: ../../any.pm_.c:608
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Am gãsit interfaþele %s %s"
-
-#: ../../any.pm_.c:609
-msgid "Do you have another one?"
-msgstr "Aveþi o altã interfaþa?"
-
-#: ../../any.pm_.c:610
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Aveþi vreo interfaþã %s ?"
-
-#: ../../any.pm_.c:612 ../../interactive.pm_.c:104 ../../my_gtk.pm_.c:616
-#: ../../printerdrake.pm_.c:237
-msgid "No"
-msgstr "Nu"
-
-#: ../../any.pm_.c:612 ../../interactive.pm_.c:104 ../../my_gtk.pm_.c:616
-msgid "Yes"
-msgstr "Da"
-
-#: ../../any.pm_.c:613
-msgid "See hardware info"
-msgstr "Vezi info hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:648
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalarea pilotului pentru %s cartea %s"
-
-#: ../../any.pm_.c:649
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:660
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Care %s pilot sã încerc?"
-
-#: ../../any.pm_.c:668
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"În anumite cazuri, pilotul %s necesitã informaþii suplimentare pentru a\n"
-"funcþiona corect, dar funcþioneazã bine ºi fãrã. Doriþi sã specificaþi\n"
-"opþiuni suplimentare sau îi permiteþi sã interogheze calculatorul pentru\n"
-"informaþiile necesare? Ocazional, interogarea poate bloca calculatorul,\n"
-"dar n-ar trebui sã produce nici o deteriorare."
-
-#: ../../any.pm_.c:673
-msgid "Autoprobe"
-msgstr "Autoprobeazã"
-
-#: ../../any.pm_.c:673
-msgid "Specify options"
-msgstr "Specificaþi opþiunile"
-
-#: ../../any.pm_.c:677
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Puteþi furniza acum opþiunile modulului %s."
-
-#: ../../any.pm_.c:683
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Puteþi furniza acum opþiunile modulului %s.\n"
-"Opþiunile sunt în formatul ``nume=valoare nume2=valoare2 ...''.\n"
-"de exemplu, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:686
-msgid "Module options:"
-msgstr "Opþiuni pentru module:"
-
-#: ../../any.pm_.c:697
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Încãcarea modulului %s a eºuat.\n"
-"Doriþi sãîncercaþi cu alþi parametri ?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid "(already added %s)"
-msgstr "(deja adãugat %s)"
-
-#: ../../any.pm_.c:719
-msgid "This password is too simple"
-msgstr "Aceasta parolã e prea simplã"
-
-#: ../../any.pm_.c:720
-msgid "Please give a user name"
-msgstr "Va rog înscrieþi numele utilizatorului"
-
-#: ../../any.pm_.c:721
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Numele utilizatorului trebuie sa conþinã numai caractere minuscule, numere, "
-"`-' ºi `_'"
-
-#: ../../any.pm_.c:722
-msgid "This user name is already added"
-msgstr "Acest nume de utilizator e deja adãugat"
-
-#: ../../any.pm_.c:726
-msgid "Add user"
-msgstr "Adãugaþi un utilizator"
-
-#: ../../any.pm_.c:727
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Intraþi un utilizator\n"
-"%s"
-
-#: ../../any.pm_.c:728
-msgid "Accept user"
-msgstr "Acceptare utilizator"
-
-#: ../../any.pm_.c:739
-msgid "Real name"
-msgstr "Nume real"
-
-#: ../../any.pm_.c:740 ../../printerdrake.pm_.c:97
-#: ../../printerdrake.pm_.c:131
-msgid "User name"
-msgstr "Numele utilizatorului"
-
-#: ../../any.pm_.c:743
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:745
-msgid "Icon"
-msgstr "Icoanã"
-
-#: ../../any.pm_.c:766
-msgid "Autologin"
-msgstr ""
-
-#: ../../any.pm_.c:767
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"If you don't want to use this feature, click on the cancel button."
-msgstr ""
-"Pot sã configurez calculatorul sa demareze automat X la demaraj.\n"
-"Doriþi sa demaraþi X cînd redemaraþi ?"
-
-#: ../../any.pm_.c:769
-#, fuzzy
-msgid "Choose the default user:"
-msgstr "Alegeþi noua mãrime"
-
-#: ../../any.pm_.c:770
-#, fuzzy
-msgid "Choose the window manager to run:"
-msgstr "Alegeþi unealta pe care doriþi sã o folosiþi"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:262 ../../bootloader.pm_.c:608
-#, fuzzy, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Bun venit la gestionarul de sisteme de operare %s!\n"
-"\n"
-"Pentru a afisa diferitele posibilitati, apasati <TAB>.\n"
-"\n"
-"Pentru a demara unul dintre ele, scrieti-i numele si apasati <ENTER> sau\n"
-"asteptati %d secunde pentru demararea din oficiu.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:809
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bun venit la gestionarul de sisteme de operare GRUB!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:812
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Folositi tastele %c si %c pentru selectarea intrarii puse in evidenta."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:815
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Apasati enter pentru a demara OS-ul selectat, 'e' pentru a edita"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:818
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "comandele inainte de a demara, sau 'c' pentru linia de comanda."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:821
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Intrarea selectata va demara dupa %d secunde"
-
-#: ../../bootloader.pm_.c:825
-msgid "not enough room in /boot"
-msgstr "nu e destul spaþiu în /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:918
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:920
-msgid "Start Menu"
-msgstr "Meniu de Start"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "Configuraþie post-install"
-
-#: ../../bootlook.pm_.c:79
-#, fuzzy
-msgid "/_File"
-msgstr "Fiºiere:\n"
-
-#: ../../bootlook.pm_.c:81
-msgid "/File/_New"
-msgstr ""
-
-#: ../../bootlook.pm_.c:82
-msgid "<control>N"
-msgstr ""
-
-#: ../../bootlook.pm_.c:84
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../bootlook.pm_.c:85
-msgid "<control>O"
-msgstr ""
-
-#: ../../bootlook.pm_.c:87
-msgid "/File/_Save"
-msgstr ""
-
-#: ../../bootlook.pm_.c:88
-msgid "<control>S"
-msgstr ""
-
-#: ../../bootlook.pm_.c:90
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "/File/-"
-msgstr ""
-
-#: ../../bootlook.pm_.c:93
-msgid "/File/_Quit"
-msgstr ""
-
-#: ../../bootlook.pm_.c:94
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:96
-msgid "/_Options"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-msgid "/Options/Test"
-msgstr ""
-
-#: ../../bootlook.pm_.c:99
-#, fuzzy
-msgid "/_Help"
-msgstr "Ajutor"
-
-#: ../../bootlook.pm_.c:101
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../bootlook.pm_.c:111 ../../standalone/drakgw_.c:634
-#: ../../standalone/draknet_.c:262 ../../standalone/tinyfirewall_.c:57
-#, fuzzy
-msgid "Configure"
-msgstr "Configuraþi X"
-
-#: ../../bootlook.pm_.c:114
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../bootlook.pm_.c:121
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Nume de domeniu"
-
-#: ../../bootlook.pm_.c:131
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:134
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Monitor"
-
-#: ../../bootlook.pm_.c:137
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Alegeþi un alt tip de monitor"
-
-#: ../../bootlook.pm_.c:140
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:144
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:169
-#, fuzzy
-msgid "Boot mode"
-msgstr "Periferic de demaraj"
-
-#: ../../bootlook.pm_.c:179
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:187
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:193
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:210
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:228
-#, fuzzy
-msgid "Default Runlevel"
-msgstr "Standard"
-
-#: ../../bootlook.pm_.c:236 ../../standalone/draknet_.c:88
-#: ../../standalone/draknet_.c:120 ../../standalone/draknet_.c:184
-#: ../../standalone/draknet_.c:302 ../../standalone/draknet_.c:396
-#: ../../standalone/draknet_.c:473 ../../standalone/draknet_.c:509
-#: ../../standalone/draknet_.c:617
-msgid "OK"
-msgstr ""
-
-#: ../../bootlook.pm_.c:238 ../../install_steps_gtk.pm_.c:576
-#: ../../interactive.pm_.c:114 ../../interactive.pm_.c:269
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:357
-#: ../../my_gtk.pm_.c:360 ../../my_gtk.pm_.c:617
-#: ../../standalone/drakgw_.c:639 ../../standalone/draknet_.c:95
-#: ../../standalone/draknet_.c:127 ../../standalone/draknet_.c:295
-#: ../../standalone/draknet_.c:485 ../../standalone/draknet_.c:631
-#: ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Anuleazã"
-
-#: ../../bootlook.pm_.c:315
-msgid "can not open /etc/inittab for reading: $!"
-msgstr ""
-
-#: ../../bootlook.pm_.c:369
-msgid "can not open /etc/sysconfig/autologin for reading: $!"
-msgstr ""
-
-#: ../../bootlook.pm_.c:435 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Instalarea lui LILO a eºuat. Urmãtoarea eroare a apãrut:"
-
-#: ../../diskdrake.pm_.c:21 ../../diskdrake.pm_.c:462
-msgid "Create"
-msgstr "Creazã"
-
-#: ../../diskdrake.pm_.c:22
-msgid "Unmount"
-msgstr "Demonteazã"
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:464
-msgid "Delete"
-msgstr "ªterge"
-
-#: ../../diskdrake.pm_.c:23
-msgid "Format"
-msgstr "Formateazã"
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:653
-msgid "Resize"
-msgstr "Redimensioneazã"
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:462
-#: ../../diskdrake.pm_.c:518
-msgid "Type"
-msgstr "Tip"
-
-#: ../../diskdrake.pm_.c:24 ../../diskdrake.pm_.c:539
-msgid "Mount point"
-msgstr "Punct de montaj"
-
-#: ../../diskdrake.pm_.c:38
-msgid "Write /etc/fstab"
-msgstr "Scrie /etc/fstab"
-
-#: ../../diskdrake.pm_.c:39
-msgid "Toggle to expert mode"
-msgstr "Trece în mod expert"
-
-#: ../../diskdrake.pm_.c:40
-msgid "Toggle to normal mode"
-msgstr "Trece în mod normal"
-
-#: ../../diskdrake.pm_.c:41
-msgid "Restore from file"
-msgstr "Restaureazã din fiºierul"
-
-#: ../../diskdrake.pm_.c:42
-msgid "Save in file"
-msgstr "Înregistreazã în fiºierul"
-
-#: ../../diskdrake.pm_.c:43
-msgid "Wizard"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:44
-msgid "Restore from floppy"
-msgstr "Restaureazã din dischetã"
-
-#: ../../diskdrake.pm_.c:45
-msgid "Save on floppy"
-msgstr "Înregistreaza pe dischetã"
-
-#: ../../diskdrake.pm_.c:49
-msgid "Clear all"
-msgstr "ªterge tot"
-
-#: ../../diskdrake.pm_.c:54
-msgid "Format all"
-msgstr "Formateazã tot"
-
-#: ../../diskdrake.pm_.c:55
-msgid "Auto allocate"
-msgstr "Auto aloca"
-
-#: ../../diskdrake.pm_.c:59
-msgid "All primary partitions are used"
-msgstr "Toate partiþiile principale sunt alocate"
-
-#: ../../diskdrake.pm_.c:59
-msgid "I can't add any more partition"
-msgstr "Imposibil de adãugat o alta partiþie"
-
-#: ../../diskdrake.pm_.c:59
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Pentru a avea mai multe partiþii, ºtergeþi una pentru a putea crea una de "
-"tip Extended "
-
-#: ../../diskdrake.pm_.c:61
-msgid "Not enough space for auto-allocating"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:63
-msgid "Undo"
-msgstr "Anuleazã"
-
-#: ../../diskdrake.pm_.c:64
-msgid "Write partition table"
-msgstr "Scrie tabloul de partiþii"
-
-#: ../../diskdrake.pm_.c:65 ../../install_steps_interactive.pm_.c:185
-#, fuzzy
-msgid "More"
-msgstr "Deplaseazã"
-
-#: ../../diskdrake.pm_.c:116
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:116
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:116
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:116
-msgid "SunOS"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:116
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:117
-msgid "Empty"
-msgstr "Gol"
-
-#: ../../diskdrake.pm_.c:117 ../../install_steps_gtk.pm_.c:407
-#: ../../mouse.pm_.c:145
-msgid "Other"
-msgstr "Alt tip"
-
-#: ../../diskdrake.pm_.c:123
-msgid "Filesystem types:"
-msgstr "Tipul de fiºiere sistem: "
-
-#: ../../diskdrake.pm_.c:132 ../../install_steps_gtk.pm_.c:577
-msgid "Details"
-msgstr "Detalii"
-
-#: ../../diskdrake.pm_.c:147
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Aveþi o singurã partiþie mare FAT\n"
-"(în general folositã de MicroSoft  Dos/Windows).\n"
-"Va sugerez sã redimensionaþi mai întîi acea partiþie\n"
-"faceþi clic pe ea ºi apoi pe \"Redimensioneazã\")"
-
-#: ../../diskdrake.pm_.c:152
-msgid "Please make a backup of your data first"
-msgstr "Vã rog faceþi mai întîi o copie a datelor dumneavoastrã"
-
-#: ../../diskdrake.pm_.c:152 ../../diskdrake.pm_.c:170
-#: ../../diskdrake.pm_.c:179 ../../diskdrake.pm_.c:570
-#: ../../diskdrake.pm_.c:592
-msgid "Read carefully!"
-msgstr "Citiþi cu atenþie!"
-
-#: ../../diskdrake.pm_.c:155
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Dacã doriþi sã folosiþi aboot, asiguraþi-vã sã lãsaþi un spaþiu liber\n"
-"(2048 de sectoare sunt de ajuns) la începutul discului"
-
-#: ../../diskdrake.pm_.c:170
-msgid "Be careful: this operation is dangerous."
-msgstr "Atenþie: aceasta operaþie e periculoasã."
-
-#: ../../diskdrake.pm_.c:214 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:322 ../../standalone/diskdrake_.c:66
-msgid "Error"
-msgstr "Eroare"
-
-#: ../../diskdrake.pm_.c:238 ../../diskdrake.pm_.c:748
-msgid "Mount point: "
-msgstr "Punct de montaj: "
-
-#: ../../diskdrake.pm_.c:239 ../../diskdrake.pm_.c:298
-msgid "Device: "
-msgstr "Periferic: "
-
-#: ../../diskdrake.pm_.c:240
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Litera perifericului DOS: %s (doar o presupunere)\n"
-
-#: ../../diskdrake.pm_.c:244 ../../diskdrake.pm_.c:251
-#: ../../diskdrake.pm_.c:301
-msgid "Type: "
-msgstr "Tip: "
-
-#: ../../diskdrake.pm_.c:248
-msgid "Name: "
-msgstr "Nume: "
-
-#: ../../diskdrake.pm_.c:253
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Start: sector %s\n"
-
-#: ../../diskdrake.pm_.c:254
-#, c-format
-msgid "Size: %s"
-msgstr "Mãrimea: %s"
-
-#: ../../diskdrake.pm_.c:256
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectori"
-
-#: ../../diskdrake.pm_.c:258
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "De la cilindrul %d la cilindrul %d\n"
-
-#: ../../diskdrake.pm_.c:259
-msgid "Formatted\n"
-msgstr "Formatat\n"
-
-#: ../../diskdrake.pm_.c:260
-msgid "Not formatted\n"
-msgstr "Neformatat\n"
-
-#: ../../diskdrake.pm_.c:261
-msgid "Mounted\n"
-msgstr "Montat\n"
-
-#: ../../diskdrake.pm_.c:262
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake.pm_.c:264
-#, c-format
-msgid "Loopback file(s): %s\n"
-msgstr "Fiºier(e) loopback: %s\n"
-
-#: ../../diskdrake.pm_.c:265
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partiþia demaratã din oficiu\n"
-"    (pentru demaraj MS-DOS, nu pentru lilo)\n"
-
-#: ../../diskdrake.pm_.c:267
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivel %s\n"
-
-#: ../../diskdrake.pm_.c:268
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Mãrimea porþiunii %s\n"
-
-#: ../../diskdrake.pm_.c:269
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discuri-RAID %s\n"
-
-#: ../../diskdrake.pm_.c:271
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Numele fiºierului loopback: %s"
-
-#: ../../diskdrake.pm_.c:274
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:277
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:294
-msgid "Please click on a partition"
-msgstr "Vã rog faceþi clic pe o partiþie"
-
-#: ../../diskdrake.pm_.c:299
-#, c-format
-msgid "Size: %s\n"
-msgstr "Mãrime: %s\n"
-
-#: ../../diskdrake.pm_.c:300
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s cylinders, %s heads, %s sectors\n"
-
-#: ../../diskdrake.pm_.c:302
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discuri-LVM %s\n"
-
-#: ../../diskdrake.pm_.c:303
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipul tabloul de partiþii : %s\n"
-
-#: ../../diskdrake.pm_.c:304
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "pe bus-ul %d id %d\n"
-
-#: ../../diskdrake.pm_.c:320
-msgid "Mount"
-msgstr "Montaj"
-
-#: ../../diskdrake.pm_.c:322
-msgid "Active"
-msgstr "Activ"
-
-#: ../../diskdrake.pm_.c:324
-msgid "Add to RAID"
-msgstr "Adaugã la RAID"
-
-#: ../../diskdrake.pm_.c:326
-msgid "Remove from RAID"
-msgstr "ªterge din RAID"
-
-#: ../../diskdrake.pm_.c:328
-msgid "Modify RAID"
-msgstr "Modificã RAID"
-
-#: ../../diskdrake.pm_.c:330
-msgid "Add to LVM"
-msgstr "Adaugã la LVM"
-
-#: ../../diskdrake.pm_.c:332
-msgid "Remove from LVM"
-msgstr "ªterge din LVM"
-
-#: ../../diskdrake.pm_.c:334
-msgid "Use for loopback"
-msgstr "Foloseºte pentru loopback"
-
-#: ../../diskdrake.pm_.c:341
-msgid "Choose action"
-msgstr "Alegeþi acþiunea"
-
-#: ../../diskdrake.pm_.c:435
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Îmi pare rãu dar nu voi accepta sã creez /boot atît de departe ê disc (pe un "
-"cilindru > 1024).\n"
-"Sau folosiþi LILO soi nu va funcþiona, sau nu folosiþi LILO ºi atunci nu\n"
-"aveþi nevoie de /boot"
-
-#: ../../diskdrake.pm_.c:439
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Partiþia pe care aþi selecþionat-o pentru adãugare ca root (/) e fizic "
-"localizatã dincolo\n"
-"de cilindru 1024 pe discul dur ºi nu aveþi nici o partiþie /boot.\n"
-"Dacã planificaþi sã folosiþi LILO ca gestionar de demaraj, asiguraþi-vã "
-"cãaþi adãugat o partiþie /boot."
-
-#: ../../diskdrake.pm_.c:445
-#, fuzzy
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Aþi selectat o partiþie software root en tant que RAID.\n"
-"Nici un gestionar de boot nu e capabil sã gereze aceasta fãrã\n"
-"o partitie /boot. Folosiþi deci o partiþie /boot dacã doriþi sã folosiþi\n"
-"lilo sau grub."
-
-#: ../../diskdrake.pm_.c:462 ../../diskdrake.pm_.c:464
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Foloseºte ``%s'' în loc"
-
-#: ../../diskdrake.pm_.c:468
-msgid "Use ``Unmount'' first"
-msgstr "Foloseºte ``Demontare' mai întîi"
-
-#: ../../diskdrake.pm_.c:469 ../../diskdrake.pm_.c:513
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Dupã schimbarea tipului de partiþie %s, toate datele de pe aceasta "
-"partiþievor fi pierdute"
-
-#: ../../diskdrake.pm_.c:481
-msgid "Continue anyway?"
-msgstr "Continuaþi totuºi?"
-
-#: ../../diskdrake.pm_.c:486
-msgid "Quit without saving"
-msgstr "Ieºire fãrã a înregistra"
-
-#: ../../diskdrake.pm_.c:486
-msgid "Quit without writing the partition table?"
-msgstr "Ieºire din program fãrã a scrie în tabloul de partiþii ?"
-
-#: ../../diskdrake.pm_.c:516
-msgid "Change partition type"
-msgstr "Schimbã tipul partiþiei"
-
-#: ../../diskdrake.pm_.c:517
-#, fuzzy
-msgid "Which filesystem do you want?"
-msgstr "Ce limbã doriþi ?"
-
-#: ../../diskdrake.pm_.c:520 ../../diskdrake.pm_.c:780
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:537
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Unde doriþi sã montaþi fiºierul loopback %s?"
-
-#: ../../diskdrake.pm_.c:538
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Unde doriþi sã montaþi perifericul %s?"
-
-#: ../../diskdrake.pm_.c:542
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nu pot sã desfiinþez acest punct de montaj pentru cã partiþia e "
-"folositãpentru loopback.\n"
-"ªtergeþi loopback-ul mai întîi"
-
-#: ../../diskdrake.pm_.c:561
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Dupã formatarea partiþiei %s toate datele de pe aceasta partiþie vor fi "
-"pierdute"
-
-#: ../../diskdrake.pm_.c:563
-msgid "Formatting"
-msgstr "Formatare"
-
-#: ../../diskdrake.pm_.c:564
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatarea fiºierului loopback %s"
-
-#: ../../diskdrake.pm_.c:565 ../../install_steps_interactive.pm_.c:430
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatarea partiþiei %s"
-
-#: ../../diskdrake.pm_.c:570
-msgid "After formatting all partitions,"
-msgstr "Dupã formatarea tuturor partiþiilor,"
-
-#: ../../diskdrake.pm_.c:570
-msgid "all data on these partitions will be lost"
-msgstr "toate datele din aceste partiþii vor fi pierdute"
-
-#: ../../diskdrake.pm_.c:576
-msgid "Move"
-msgstr "Deplaseazã"
-
-#: ../../diskdrake.pm_.c:577
-msgid "Which disk do you want to move it to?"
-msgstr "Pe ce disc doriþi sã schimbaþi ?"
-
-#: ../../diskdrake.pm_.c:578
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake.pm_.c:579
-msgid "Which sector do you want to move it to?"
-msgstr "La ce sector doriþi sa schimbaþi ?"
-
-#: ../../diskdrake.pm_.c:582
-msgid "Moving"
-msgstr "Schimbã"
-
-#: ../../diskdrake.pm_.c:582
-msgid "Moving partition..."
-msgstr "Schimbã partiþia..."
-
-#: ../../diskdrake.pm_.c:592
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Tabloul de partiþii al perifericului %s va fi scris pe disc!"
-
-#: ../../diskdrake.pm_.c:594
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Va trebui sã redemaraþi pentru ca schimbãrile sa fie luate în considerare"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Computing FAT filesystem bounds"
-msgstr "Calculeazã salturile de fiºiere FAT"
-
-#: ../../diskdrake.pm_.c:615 ../../diskdrake.pm_.c:680
-#: ../../install_interactive.pm_.c:107
-msgid "Resizing"
-msgstr "Redimensioneazã"
-
-#: ../../diskdrake.pm_.c:643
-#, fuzzy
-msgid "This partition is not resizeable"
-msgstr "Ce tip de partiþie doriþi?"
-
-#: ../../diskdrake.pm_.c:648
-msgid "All data on this partition should be backed-up"
-msgstr "Toate datele de pe aceasta partiþie ar trebui salvate mai întîi"
-
-#: ../../diskdrake.pm_.c:650
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Dupã redimensionarea partiþiei %s toate datele de pe aceasta partiþie vor fi "
-"pierdute"
-
-#: ../../diskdrake.pm_.c:660
-msgid "Choose the new size"
-msgstr "Alegeþi noua mãrime"
-
-#: ../../diskdrake.pm_.c:660 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../diskdrake.pm_.c:714
-msgid "Create a new partition"
-msgstr "Creeazã o nouã partiþie"
-
-#: ../../diskdrake.pm_.c:740
-msgid "Start sector: "
-msgstr "Sector de început: "
-
-#: ../../diskdrake.pm_.c:744 ../../diskdrake.pm_.c:819
-msgid "Size in MB: "
-msgstr "Mãrimea în MB: "
-
-#: ../../diskdrake.pm_.c:747 ../../diskdrake.pm_.c:822
-msgid "Filesystem type: "
-msgstr "Tipul de fiºiere: "
-
-#: ../../diskdrake.pm_.c:750
-msgid "Preference: "
-msgstr "Preferinþã: "
-
-#: ../../diskdrake.pm_.c:798
-msgid "This partition can't be used for loopback"
-msgstr "Aceastã partiþie nu poate fi folositã pentru loopback"
-
-#: ../../diskdrake.pm_.c:808
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake.pm_.c:818
-msgid "Loopback file name: "
-msgstr "Numele fiºierului loopback"
-
-#: ../../diskdrake.pm_.c:844
-msgid "File already used by another loopback, choose another one"
-msgstr "Fiºier deja folosit de un alt loopback, alegeþi un altul"
-
-#: ../../diskdrake.pm_.c:845
-msgid "File already exists. Use it?"
-msgstr "Fiºierul existã deja. Sã-l folosesc ?"
-
-#: ../../diskdrake.pm_.c:867 ../../diskdrake.pm_.c:883
-msgid "Select file"
-msgstr "Selecþioneazã fiºierul"
-
-#: ../../diskdrake.pm_.c:876
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Tabloul de partiþie salvat nu are aceeaºi mãrime\n"
-"Sã continui totuºi ?"
-
-#: ../../diskdrake.pm_.c:884
-msgid "Warning"
-msgstr "Avertisment"
-
-#: ../../diskdrake.pm_.c:885
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Introduceþi o dischetã în periferic\n"
-"Toate datele de pe aceastã dischetã vor fi pierdute"
-
-#: ../../diskdrake.pm_.c:896
-msgid "Trying to rescue partition table"
-msgstr "Încercare de salvare a tabloului de partiþii"
-
-#: ../../diskdrake.pm_.c:905
-msgid "device"
-msgstr "periferic: "
-
-#: ../../diskdrake.pm_.c:906
-msgid "level"
-msgstr "nivel"
-
-#: ../../diskdrake.pm_.c:907
-msgid "chunk size"
-msgstr "mãrimea porþiunii "
-
-#: ../../diskdrake.pm_.c:919
-msgid "Choose an existing RAID to add to"
-msgstr "Alegeþi un RAID existent la care sã adãugaþi"
-
-#: ../../diskdrake.pm_.c:920 ../../diskdrake.pm_.c:946
-msgid "new"
-msgstr "nou"
-
-#: ../../diskdrake.pm_.c:944
-msgid "Choose an existing LVM to add to"
-msgstr "Alegeþi un LVM existent la care sã adãugaþi"
-
-#: ../../diskdrake.pm_.c:949
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:976
-msgid "Removable media automounting"
-msgstr "Automontare automatã a perifericelor extractibile"
-
-#: ../../diskdrake.pm_.c:977
-msgid "Rescue partition table"
-msgstr "Salveazã tabelul de partiþii"
-
-#: ../../diskdrake.pm_.c:979
-msgid "Reload"
-msgstr "Reîncarcã"
-
-#: ../../fs.pm_.c:88 ../../fs.pm_.c:95 ../../fs.pm_.c:101 ../../fs.pm_.c:107
-#: ../../fs.pm_.c:113
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s Formatarea %s eºuatã"
-
-#: ../../fs.pm_.c:143
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nu ºtiu cum sã formatez %s în tipul %s"
-
-#: ../../fs.pm_.c:230
-msgid "mount failed: "
-msgstr "montare eºuatã: "
-
-#: ../../fs.pm_.c:242
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "eroare la demontarea %s: %s"
-
-#: ../../fsedit.pm_.c:21
-#, fuzzy
-msgid "simple"
-msgstr "Fiºier"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:262
-msgid "Mount points must begin with a leading /"
-msgstr "Punctele de montaje trebuie sa înceapã cu un /"
-
-#: ../../fsedit.pm_.c:265
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "O partiþie cu punctul de montaj %s existã deja\n"
-
-#: ../../fsedit.pm_.c:273
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Montaje circulare %s\n"
-
-#: ../../fsedit.pm_.c:285
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:286
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:287
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Aveþi nevoie de un sistem de fiºiere serios (ext2, reiserfs) pentru\n"
-"acest punct de montaj.\n"
-
-#: ../../fsedit.pm_.c:369
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Eroare la citirea  %s pentru a scrie: %s"
-
-#: ../../fsedit.pm_.c:453
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"O eroare a apãrut - nu am gãsit nici un periferic pentru a instala noi "
-"fiºiere\n"
-"sistem. Verificaþi harware-ul pentru a detecta cauza acestei probleme."
-
-#: ../../fsedit.pm_.c:467
-msgid "You don't have any partitions!"
-msgstr "Nu aveþi nici o partiþie!"
-
-#: ../../help.pm_.c:9
-#, fuzzy
-msgid ""
-"Please choose your preferred language for installation and system usage."
-msgstr "Alegeþi limba pentru instalare ºi folosirea sistemului."
-
-#: ../../help.pm_.c:12
-msgid ""
-"You need to accept the terms of the above license to continue installation.\n"
-"\n"
-"\n"
-"Please click on \"Accept\" if you agree with its terms.\n"
-"\n"
-"\n"
-"Please click on \"Refuse\" if you disagree with its terms. Installation will "
-"end without modifying your current\n"
-"configuration."
-msgstr ""
-
-#: ../../help.pm_.c:22
-msgid "Choose the layout corresponding to your keyboard from the list above"
-msgstr "Alegeþi dispoziþia tastaturii din lista de mai sus"
-
-#: ../../help.pm_.c:25
-msgid ""
-"If you wish other languages (than the one you choose at\n"
-"beginning of installation) will be available after installation, please "
-"chose\n"
-"them in list above. If you want select all, you just need to select \"All\"."
-msgstr ""
-
-#: ../../help.pm_.c:30
-msgid ""
-"Please choose \"Install\" if there are no previous version of Linux-"
-"Mandrake\n"
-"installed or if you wish to use several operating systems.\n"
-"\n"
-"\n"
-"Please choose \"Update\" if you wish to update an already installed version "
-"of Linux-Mandrake.\n"
-"\n"
-"\n"
-"Depend of your knowledge in GNU/Linux, you can choose one of the following "
-"levels to install or update your\n"
-"Linux-Mandrake operating system:\n"
-"\n"
-"\t* Recommended: if you have never installed a GNU/Linux operating system "
-"choose this. Installation will be\n"
-"\t  be very easy and you will be asked only on few questions.\n"
-"\n"
-"\n"
-"\t* Customized: if you are familiar enough with GNU/Linux, you may choose "
-"the primary usage (workstation, server,\n"
-"\t  development) of your system. You will need to answer to more questions "
-"than in \"Recommended\" installation\n"
-"\t  class, so you need to know how GNU/Linux works to choose this "
-"installation class.\n"
-"\n"
-"\n"
-"\t* Expert: if you have a good knowledge in GNU/Linux, you can choose this "
-"installation class. As in \"Customized\"\n"
-"\t  installation class, you will be able to choose the primary usage "
-"(workstation, server, development). Be very\n"
-"\t  careful before choose this installation class. You will be able to "
-"perform a higly customized installation.\n"
-"\t  Answer to some questions can be very difficult if you haven't a good "
-"knowledge in GNU/Linux. So, don't choose\n"
-"\t  this installation class unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:56
-msgid ""
-"Select:\n"
-"\n"
-"  - Customized: If you are familiar enough with GNU/Linux, you may then "
-"choose\n"
-"    the primary usage for your machine. See below for details.\n"
-"\n"
-"\n"
-"  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-"    perform a highly customized installation. As for a \"Customized\"\n"
-"    installation class, you will be able to select the usage for your "
-"system.\n"
-"    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-"DOING!"
-msgstr ""
-"Selectare:\n"
-"\n"
-"  - Personalizat: Dacã sunteþi destul de familiar cu GNU/Linux, puteþi\n"
-"    atunci sã alegeþi utilizarea principalã a calculatorului. Vezi mai jos\n"
-"    pentru detalii.\n"
-"\n"
-"\n"
-"  - Expert: Aceasta presupune cã sunteþi foarte familiar cu  GNU/Linux ºi\n"
-"    doriþi sã faceþi o instalare foarte personalizatã. Ca ºi pentru clasa\n"
-"    \"Personalizat\", veþi putea sã selectaþi utilizarea sistemului\n"
-"    dumneavoastrã.\n"
-"    Dar vã rog, NU ALEGEÞi ACEASTA DECÎT DACÃ ªTIÞI CE FACEÞI!."
-
-#: ../../help.pm_.c:68
-#, fuzzy
-msgid ""
-"You must now define your machine usage. Choices are:\n"
-"\n"
-"\t* Workstation: this the ideal choice if you intend to use your machine "
-"primarily for everyday use, at office or\n"
-"\t  at home.\n"
-"\n"
-"\n"
-"\t* Development: if you intend to use your machine primarily for software "
-"development, it is the good choice. You\n"
-"\t  will then have a complete collection of software installed in order to "
-"compile, debug and format source code,\n"
-"\t  or create software packages.\n"
-"\n"
-"\n"
-"\t* Server: if you intend to use this machine as a server, it is the good "
-"choice. Either a file server (NFS or\n"
-"\t  SMB), a print server (Unix style or Microsoft Windows style), an "
-"authentication server (NIS), a database\n"
-"\t  server and so on. As such, do not expect any gimmicks (KDE, GNOME, etc.) "
-"to be installed."
-msgstr ""
-"Diferitele posibilitãþi pentru utilizarea calculatorului (furnizate, deci, "
-"dacã\n"
-"aþi ales \"Personalizat\" sau \"Expert\" la clasa de instalare) sunt \n"
-"urmãtoarele:\n"
-"\n"
-"  - Normal: alegeþi aceasta dacã doriþi sã folosiþi calculatorul pentru\n"
-"    utilizare zilnicã (munca de servici, manipulaþii grafice, etc). Nu vã\n"
-"    aºteptaþi la nici un compilator, utilitare de programare ºi altele\n"
-"\n"
-"  - Programare: cum numele-l indicã. Alegeþi acesta dacã doriþi sã aveþi\n"
-"    un calculator în principal pentru programare. Veþi avea atunci o "
-"colecþiecompletã\n"
-"    instalatã pentru a compila, deboga ºi formata cod sursã sau crea \n"
-"    pachete software.\n"
-"\n"
-"  - Server: alegeþi aceasta pentru a instala Linux-Mandrake ºi "
-"intenþionaþi    sã-l folosiþi ca server. Acesta poate fi server de fiºiere "
-"(NFS sau SMB),\n"
-"    sau server de imprimantã (Unix' lp (Line Printer) protocol sau "
-"imprimare \n"
-"stil Windows SMB, server de autentificare (NIS), server de baze de date, "
-"etc.\n"
-"Deci nu vã aºteptaþi la programe de genul KDE, GNOME...\n"
-
-#: ../../help.pm_.c:84
-msgid ""
-"DrakX will attempt to look for PCI SCSI adapter(s). If DrakX\n"
-"finds an SCSI adapter and knows which driver to use, it will be "
-"automatically\n"
-"installed.\n"
-"\n"
-"\n"
-"If you have no SCSI adapter, an ISA SCSI adapter or a PCI SCSI adapter that\n"
-"DrakX doesn't recognize, you will be asked if a SCSI adapter is present in "
-"your\n"
-"system. If there is no adapter present, you can click on \"No\". If you "
-"click on\n"
-"\"Yes\", a list of drivers will be presented from which you can select your\n"
-"specific adapter.\n"
-"\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for "
-"the\n"
-"options. This usually works well.\n"
-"\n"
-"\n"
-"If not, you will need to provide options to the driver. Please review the "
-"User\n"
-"Guide (chapter 3, section \"Collective informations on your hardware) for "
-"hints\n"
-"on retrieving this information from hardware documentation, from the\n"
-"manufacturer's Web site (if you have Internet access) or from Microsoft "
-"Windows\n"
-"(if you have it on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:108
-msgid ""
-"At this point, you need to choose where to install your\n"
-"Linux-Mandrake operating system on your hard drive. If it is empty or if an\n"
-"existing operating system uses all the space available on it, you need to\n"
-"partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Linux-Mandrake system.\n"
-"\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced "
-"user.\n"
-"This wizard simplifies this process. Before beginning, please consult the "
-"manual\n"
-"and take your time.\n"
-"\n"
-"\n"
-"You need at least two partitions. One is for the operating system itself and "
-"the\n"
-"other is for the virtual memory (also called Swap).\n"
-"\n"
-"\n"
-"If partitions have been already defined (from a previous installation or "
-"from\n"
-"another partitioning tool), you just need choose those to use to install "
-"your\n"
-"Linux system.\n"
-"\n"
-"\n"
-"If partitions haven't been already defined, you need to create them. \n"
-"To do that, use the wizard available above. Depending of your hard drive\n"
-"configuration, several solutions can be available:\n"
-"\n"
-"\t* Use existing partition: the wizard has detected one or more existing "
-"Linux partitions on your hard drive. If\n"
-"\t  you want to keep them, choose this option. \n"
-"\n"
-"\n"
-"\t* Erase entire disk: if you want delete all data and all partitions "
-"present on your hard drive and replace them by\n"
-"\t  your new Linux-Mandrake system, you can choose this option. Be careful "
-"with this solution, you will not be\n"
-"\t  able to revert your choice after confirmation.\n"
-"\n"
-"\n"
-"\t* Use the free space on the Windows partition: if Microsoft Windows is "
-"installed on your hard drive and takes\n"
-"\t  all space available on it, you have to create free space for Linux data. "
-"To do that you can delete your\n"
-"\t  Microsoft Windows partition and data (see \"Erase entire disk\" or "
-"\"Expert mode\" solutions) or resize your\n"
-"\t  Microsoft Windows partition. Resizing can be performed without loss of "
-"any data. This solution is\n"
-"\t  recommended if you want use both Linux-Mandrake and Microsoft Windows on "
-"same computer.\n"
-"\n"
-"\n"
-"\t  Before choosing this solution, please understand that the size of your "
-"Microsoft\n"
-"\t  Windows partition will be smaller than at present time. It means that "
-"you will have less free space under\n"
-"\t  Microsoft Windows to store your data or install new software.\n"
-"\n"
-"\n"
-"\t* Expert mode: if you want to partition manually your hard drive, you can "
-"choose this option. Be careful before\n"
-"\t  choosing this solution. It is powerful but it is very dangerous. You can "
-"lose all your data very easily. So,\n"
-"\t  don't choose this solution unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:160
-msgid ""
-"At this point, you need to choose what\n"
-"partition(s) to use to install your new Linux-Mandrake system. If "
-"partitions\n"
-"have been already defined (from a previous installation of GNU/Linux or "
-"from\n"
-"another partitioning tool), you can use existing partitions. In other "
-"cases,\n"
-"hard drive partitions must be defined.\n"
-"\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select "
-"the\n"
-"disk for partitioning by clicking on \"hda\" for the first IDE drive, \"hdb"
-"\" for\n"
-"the second or \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-"   * Clear all: this option deletes all partitions available on the selected "
-"hard drive.\n"
-"\n"
-"\n"
-"   * Auto allocate: this option allows you to automatically create Ext2 and "
-"swap partitions in free space of your\n"
-"     hard drive.\n"
-"\n"
-"\n"
-"   * Rescue partition table: if your partition table is damaged, you can try "
-"to recover it using this option. Please\n"
-"     be careful and remember that it can fail.\n"
-"\n"
-"\n"
-"   * Undo: you can use this option to cancel your changes.\n"
-"\n"
-"\n"
-"   * Reload: you can use this option if you wish to undo all changes and "
-"load your initial partitions table\n"
-"\n"
-"\n"
-"   * Wizard: If you wish to use a wizard to partition your hard drive, you "
-"can use this option. It is recommended if\n"
-"     you do not have a good knowledge in partitioning.\n"
-"\n"
-"\n"
-"   * Restore from floppy: if you have saved your partition table on a floppy "
-"during a previous installation, you can\n"
-"     recover it using this option.\n"
-"\n"
-"\n"
-"   * Save on floppy: if you wish to save your partition table on a floppy to "
-"be able to recover it, you can use this\n"
-"     option. It is strongly recommended to use this option\n"
-"\n"
-"\n"
-"   * Done: when you have finished partitioning your hard drive, use this "
-"option to save your changes.\n"
-"\n"
-"\n"
-"For information, you can reach any option using the keyboard: navigate "
-"trough the partitions using Tab and Up/Down arrows.\n"
-"\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-"           * Ctrl-c to create a new partition (when a empty partition is "
-"selected)\n"
-"\n"
-"           * Ctrl-d to delete a partition\n"
-"\n"
-"           * Ctrl-m to set the mount point\n"
-"           \n"
-"\n"
-"           \n"
-"If you are installing on a PPC Machine, you will want to create a small HFS "
-"'bootstrap' partition of at least 1MB for use\n"
-"by the yaboot bootloader. If you opt to make the partition a bit larger, say "
-"50MB, you may find it a useful place to store \n"
-"a spare kernel and ramdisk image for emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Above are listed the existing Linux partitions detected on\n"
-"your hard drive. You can keep choices make by the wizard, they are good for "
-"a\n"
-"common usage. If you change these choices, you must at least define a root\n"
-"partition (\"/\"). Don't choose a too little partition or you will not be "
-"able\n"
-"to install enough software. If you want store your data on a separate "
-"partition,\n"
-"you need also to choose a \"/home\" (only possible if you have more than "
-"one\n"
-"Linux partition available).\n"
-"\n"
-"\n"
-"For information, each partition is listed as follows: \"Name\", \"Capacity"
-"\".\n"
-"\n"
-"\n"
-"\"Name\" is coded as follow: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and "
-"\"sd\"\n"
-"if it is an SCSI hard drive.\n"
-"\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE "
-"hard drives:\n"
-"\n"
-"   * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-"   * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"\n"
-"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means "
-"\"secondary hard drive\", etc..."
-msgstr ""
-
-#: ../../help.pm_.c:258
-msgid ""
-"Choose the hard drive you want to erase to install your\n"
-"new Linux-Mandrake partition. Be careful, all data present on it will be "
-"lost\n"
-"and will not be recoverable."
-msgstr ""
-
-#: ../../help.pm_.c:263
-msgid ""
-"Click on \"OK\" if you want to delete all data and\n"
-"partitions present on this hard drive. Be careful, after clicking on \"OK\", "
-"you\n"
-"will not be able to recover any data and partitions present on this hard "
-"drive,\n"
-"including any Windows data.\n"
-"\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../help.pm_.c:273
-msgid ""
-"More than one Microsoft Windows partition have been\n"
-"detected on your hard drive. Please choose the one you want resize to "
-"install\n"
-"your new Linux-Mandrake operating system.\n"
-"\n"
-"\n"
-"For information, each partition is listed as follow; \"Linux name\", "
-"\"Windows\n"
-"name\" \"Capacity\".\n"
-"\n"
-"\"Linux name\" is coded as follow: \"hard drive type\", \"hard drive number"
-"\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and \"sd"
-"\"\n"
-"if it is an SCSI hard drive.\n"
-"\n"
-"\n"
-"\"Hard drive number\" is always a letter putted after \"hd\" or \"sd\". With "
-"IDE hard drives:\n"
-"\n"
-"   * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-"   * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means "
-"\"secondary hard drive\", etc.\n"
-"\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first "
-"disk\n"
-"or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:306
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:309
-msgid ""
-"Any partitions that have been newly defined must be\n"
-"formatted for use (formatting meaning creating a filesystem).\n"
-"\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to "
-"erase\n"
-"the data they contain. If you wish do that, please also select the "
-"partitions\n"
-"you want to format.\n"
-"\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing "
-"partitions.\n"
-"You must reformat the partitions containing the operating system (such as \"/"
-"\",\n"
-"\"/usr\" or \"/var\") but do you no have to reformat partitions containing "
-"data\n"
-"that you wish to keep (typically /home).\n"
-"\n"
-"\n"
-"Please be careful selecting partitions, after formatting, all data will be\n"
-"deleted and you will not be able to recover any of them.\n"
-"\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"\n"
-"Click on \"Cancel\" if you want to choose other partitions to install your "
-"new\n"
-"Linux-Mandrake operating system."
-msgstr ""
-
-#: ../../help.pm_.c:335
-#, fuzzy
-msgid ""
-"You may now select the group of packages you wish to\n"
-"install or upgrade.\n"
-"\n"
-"\n"
-"DrakX will then check whether you have enough room to install them all. If "
-"not,\n"
-"it will warn you about it. If you want to go on anyway, it will proceed onto "
-"the\n"
-"installation of all selected groups but will drop some packages of lesser\n"
-"interest. At the bottom of the list you can select the option \n"
-"\"Individual package selection\"; in this case you will have to browse "
-"through\n"
-"more than 1000 packages..."
-msgstr ""
-"Puteþi acum sã selectaþi grupul pachetelor pe care vreþi sã le instalaþi\n"
-"sau actualizaþi.\n"
-"DrakX va verifica dacã aveþi destul spaþiu pentru a le instala pe toate.Dacã "
-"nu, vã va avertiza despre asta. Dacã doriþi sã continuaþi oricum,\n"
-"va continua instalarea a tuturor grupurilor selectate dar va lãsa\n"
-"deoparte cîteva pachete de mai puþin interes. La baza listei puteþi sã\n"
-"selectaþi opþiunea \"Selectarea individualã a pachetelor\"; în acest caz\n"
-"va trebui va trebui sã parcurgeþi mai mult de 1000 de pachete..."
-
-#: ../../help.pm_.c:347
-msgid ""
-"You can now choose individually all the packages you\n"
-"wish to install.\n"
-"\n"
-"\n"
-"You can expand or collapse the tree by clicking on options in the left "
-"corner of\n"
-"the packages window.\n"
-"\n"
-"\n"
-"If you prefer to see packages sorted in alphabetic order, click on the icon\n"
-"\"Toggle flat and group sorted\".\n"
-"\n"
-"\n"
-"If you want not to be warned on dependencies, click on \"Automatic\n"
-"dependencies\". If you do this, note that unselecting one package may "
-"silently\n"
-"unselect several other packages which depend on it."
-msgstr ""
-
-#: ../../help.pm_.c:364
-#, fuzzy
-msgid ""
-"If you have all the CDs in the list above, click Ok. If you have\n"
-"none of those CDs, click Cancel. If only some CDs are missing, unselect "
-"them,\n"
-"then click Ok."
-msgstr ""
-"Dacã aveþi toate CD-urile din lista de mai sus faceþi clic pe Ok.\n"
-"Dacã nu aveþi nici unul din aceste Cd-uri, faceþi clic pe Anuleazã.\n"
-"Dacã numai cîteva din aceste Cd-uri lipsesc, de-selectaþi-le ºi apoi Ok."
-
-#: ../../help.pm_.c:369
-msgid ""
-"Your new Linux-Mandrake operating system is currently being\n"
-"installed. This operation should take a few minutes (it depends on size you\n"
-"choose to install and the speed of your computer).\n"
-"\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:377
-msgid ""
-"You can now test your mouse. Use buttons and wheel to verify\n"
-"if settings are good. If not, you can click on \"Cancel\" to choose another\n"
-"driver."
-msgstr ""
-
-#: ../../help.pm_.c:382
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1\n"
-"port under MS Windows is named ttyS0 under GNU/Linux."
-msgstr ""
-"Vã rog selectaþi portul corect. De exemplu, portul COM1 din Windows e\n"
-"numit ttyS0 în Linux."
-
-#: ../../help.pm_.c:386
-msgid ""
-"If you wish to connect your computer to the Internet or\n"
-"to a local network please choose the correct option. Please turn on your "
-"device\n"
-"before choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"\n"
-"If you do not have any connection to the Internet or a local network, "
-"choose\n"
-"\"Disable networking\".\n"
-"\n"
-"\n"
-"If you wish to configure the network later after installation or if you "
-"have\n"
-"finished to configure your network connection, choose \"Done\"."
-msgstr ""
-
-#: ../../help.pm_.c:399
-msgid ""
-"No modem has been detected. Please select the serial port on which it is "
-"plugged.\n"
-"\n"
-"\n"
-"For information, the first serial port (called \"COM1\" under Microsoft\n"
-"Windows) is called \"ttyS0\" under Linux."
-msgstr ""
-
-#: ../../help.pm_.c:406
-msgid ""
-"You may now enter dialup options. If you don't know\n"
-"or are not sure what to enter, the correct informations can be obtained "
-"from\n"
-"your Internet Service Provider. If you do not enter the DNS (name server)\n"
-"information here, this information will be obtained from your Internet "
-"Service\n"
-"Provider at connection time."
-msgstr ""
-
-#: ../../help.pm_.c:413
-msgid ""
-"If your modem is an external modem, please turn on it now to let DrakX "
-"detect it automatically."
-msgstr ""
-
-#: ../../help.pm_.c:416
-msgid "Please turn on your modem and choose the correct one."
-msgstr ""
-
-#: ../../help.pm_.c:419
-msgid ""
-"If you are not sure if informations above are\n"
-"correct or if you don't know or are not sure what to enter, the correct\n"
-"informations can be obtained from your Internet Service Provider. If you do "
-"not\n"
-"enter the DNS (name server) information here, this information will be "
-"obtained\n"
-"from your Internet Service Provider at connection time."
-msgstr ""
-
-#: ../../help.pm_.c:426
-#, fuzzy
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, the correct informations can be\n"
-"obtained from your Internet Service Provider."
-msgstr ""
-"Puteþi intra opþiunile de telefonie. Dacã nu sunteþi sigur de ceea ce\n"
-"trebuie sã intraþi, întrebaþi ISP-ul dumneavoastrã."
-
-#: ../../help.pm_.c:431
-#, fuzzy
-msgid ""
-"You may now configure your network device.\n"
-"\n"
-"   * IP address: if you don't know or are not sure what to enter, ask your "
-"network administrator.\n"
-"     You should not enter an IP address if you select the option \"Automatic "
-"IP\" below.\n"
-"\n"
-"   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-"know or are not sure what to enter,\n"
-"     ask your network administrator.\n"
-"\n"
-"   * Automatic IP: if your network uses BOOTP or DHCP protocol, select this "
-"option. If selected, no value is needed in\n"
-"    \"IP address\". If you don't know or are not sure if you need to select "
-"this option, ask your network administrator."
-msgstr ""
-"Intrare;\n"
-"\n"
-" - Adresã IP: dacã nu ºtiþi care e, întrebaþi administratorul de reþea "
-"sauFurnizorul de Acces Internet (ISP).\n"
-"\n"
-"\n"
-" - Mascã de reþea: \"255.255.255.0\" e în general cea corectã. Dacã nu\n"
-"sunteþi sigur, întrebaþi administratorul de reþea sau ISP.\n"
-
-#: ../../help.pm_.c:443
-#, fuzzy
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, ask your network administrator."
-msgstr ""
-"Dacã reþeaua dumneavoastrã foloseºte NIS, selectaþi \"Foloseºte NIS\". Dacã\n"
-"nu ºtiþi exact, întrebaþi administratorul de reþea."
-
-#: ../../help.pm_.c:447
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, leave blank."
-msgstr ""
-
-#: ../../help.pm_.c:451
-msgid ""
-"You may now enter dialup options. If you're not sure what to enter, the\n"
-"correct information can be obtained from your ISP."
-msgstr ""
-"Puteþi intra opþiunile de telefonie. Dacã nu sunteþi sigur de ceea ce\n"
-"trebuie sã intraþi, întrebaþi ISP-ul dumneavoastrã."
-
-#: ../../help.pm_.c:455
-msgid ""
-"If you will use proxies, please configure them now. If you don't know if\n"
-"you should use proxies, ask your network administrator or your ISP."
-msgstr ""
-"Dacã folosiþi servere proxy, configuraþi-le acum. Dacã nu ºtiþi dacã ar\n"
-"trebuie sã folosiþi un proxy, întrebaþi administratorul de reþea sau ISP-ul."
-
-#: ../../help.pm_.c:459
-#, fuzzy
-msgid ""
-"You can install cryptographic package if your internet connection has been\n"
-"set up correctly. First choose a mirror where you wish to download packages "
-"and\n"
-"after that select the packages to install.\n"
-"\n"
-"\n"
-"Note you have to select mirror and cryptographic packages according\n"
-"to your legislation."
-msgstr ""
-"Puteþi instala pachetul criptografie dacã conexiunea Internet a fost\n"
-"realizatã corect. Alegeþi mai întîi un sit Internet oglindã pentru a\n"
-"recupera pachetele ºi selectaþi pachetele de instalat.\n"
-"\n"
-"Notaþi cã va trebui sã alegeþi aceste pachete criptografice corespunzãtoare\n"
-"legislaþie dumneavoastrã."
-
-#: ../../help.pm_.c:468
-msgid "You can now select your timezone according to where you live."
-msgstr ""
-
-#: ../../help.pm_.c:471
-#, fuzzy
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage\n"
-"Time) and translates it in local time according to the time zone you have\n"
-"selected.\n"
-"\n"
-"\n"
-"If you use Microsoft Windows on this computer, choose \"No\"."
-msgstr ""
-"Puteþi selecta acum zona orarã în funcþie de locul unde trãiþi.\n"
-"\n"
-"\n"
-"Linux trateazã ora în format GMT sau \"Greenwich Mean Time\" ºi-l traduce\n"
-"în orã localã în funcþie de zona orarã aleasã."
-
-#: ../../help.pm_.c:479
-#, fuzzy
-msgid ""
-"You may now choose which services you want to start at boot time.\n"
-"\n"
-"\n"
-"When your mouse comes over an item, a small balloon help will popup which\n"
-"describes the role of the service.\n"
-"\n"
-"\n"
-"Be very careful in this step if you intend to use your machine as a server: "
-"you\n"
-"will probably want not to start any services that you don't need. Please\n"
-"remember that several services can be dangerous if they are enable on a "
-"server.\n"
-"In general, select only the services that you really need."
-msgstr ""
-"Puteþi alege acum serviciile ce doriþi sã iniþializaþi la demararea\n"
-"calculatorului. Dacã plasaþi mouse-ul deasupra rubricii, un mic balon de\n"
-"ajutor va apare pentru a descrie rolul serviciului respectiv."
-
-#: ../../help.pm_.c:492
-msgid ""
-"You can configure a local printer (connected to your computer) or remote\n"
-"printer (accessible via a Unix, Netware or Microsoft Windows network)."
-msgstr ""
-
-#: ../../help.pm_.c:496
-msgid ""
-"If you wish to be able to print, please choose one printing system between\n"
-"CUPS and LPR.\n"
-"\n"
-"\n"
-"CUPS is a new, powerful and flexible printing system for Unix systems (CUPS\n"
-"means \"Common Unix Printing System\"). It is the default printing system "
-"in\n"
-"Linux-Mandrake.\n"
-"\n"
-"\n"
-"LPR is the old printing system used in previous Linux-Mandrake "
-"distributions.\n"
-"\n"
-"\n"
-"If you don't have printer, click on \"None\"."
-msgstr ""
-
-#: ../../help.pm_.c:511
-msgid ""
-"GNU/Linux can deal with many types of printer. Each of these types requires\n"
-"a different setup.\n"
-"\n"
-"\n"
-"If your printer is physically connected to your computer, select \"Local\n"
-"printer\".\n"
-"\n"
-"\n"
-"If you want to access a printer located on a remote Unix machine, select\n"
-"\"Remote printer\".\n"
-"\n"
-"\n"
-"If you want to access a printer located on a remote Microsoft Windows "
-"machine\n"
-"(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-msgstr ""
-
-#: ../../help.pm_.c:527
-msgid ""
-"Please turn on your printer before continuing to let DrakX detect it.\n"
-"\n"
-"You have to enter some informations here.\n"
-"\n"
-"\n"
-"   * Name of printer: the print spooler uses \"lp\" as default printer name. "
-"So, you must have a printer named \"lp\".\n"
-"     If you have only one printer, you can use several names for it. You "
-"just need to separate them by a pipe\n"
-"     character (a \"|\"). So, if you prefer a more meaningful name, you have "
-"to put it first, eg: \"My printer|lp\".\n"
-"     The printer having \"lp\" in its name(s) will be the default printer.\n"
-"\n"
-"\n"
-"   * Description: this is optional but can be useful if several printers are "
-"connected to your computer or if you allow\n"
-"     other computers to access to this printer.\n"
-"\n"
-"\n"
-"   * Location: if you want to put some information on your\n"
-"     printer location, put it here (you are free to write what\n"
-"     you want, for example \"2nd floor\").\n"
-msgstr ""
-
-#: ../../help.pm_.c:548
-msgid ""
-"You need to enter some informations here.\n"
-"\n"
-"\n"
-"   * Name of queue: the print spooler uses \"lp\" as default printer name. "
-"So, you need have a printer named \"lp\".\n"
-"    If you have only one printer, you can use several names for it. You just "
-"need to separate them by a pipe\n"
-"    character (a \"|\"). So, if you prefer to have a more meaningful name, "
-"you have to put it first, eg: \"My printer|lp\".\n"
-"    The printer having \"lp\" in its name(s) will be the default printer.\n"
-"\n"
-"  \n"
-"   * Spool directory: it is in this directory that printing jobs are stored. "
-"Keep the default choice\n"
-"     if you don't know what to use\n"
-"\n"
-"\n"
-"   * Printer Connection: If your printer is physically connected to your "
-"computer, select \"Local printer\".\n"
-"     If you want to access a printer located on a remote Unix machine, "
-"select \"Remote lpd printer\".\n"
-"\n"
-"\n"
-"     If you want to access a printer located on a remote Microsoft Windows "
-"machine (or on Unix machine using SMB\n"
-"     protocol), select \"SMB/Windows 95/98/NT\".\n"
-"\n"
-"\n"
-"     If you want to acces a printer located on NetWare network, select "
-"\"NetWare\".\n"
-msgstr ""
-
-#: ../../help.pm_.c:573
-msgid ""
-"Your printer has not been detected. Please enter the name of the device on\n"
-"which it is connected.\n"
-"\n"
-"\n"
-"For information, most printers are connected on the first parallel port. "
-"This\n"
-"one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-"Windows."
-msgstr ""
-
-#: ../../help.pm_.c:581
-msgid "You must now select your printer in the above list."
-msgstr ""
-
-#: ../../help.pm_.c:584
-msgid ""
-"Please select the right options according to your printer.\n"
-"Please see its documentation if you don't know what choose here.\n"
-"\n"
-"\n"
-"You will be able to test your configuration in next step and you will be "
-"able to modify it if it doesn't work as you want."
-msgstr ""
-
-#: ../../help.pm_.c:591
-#, fuzzy
-msgid ""
-"You can now enter the root password for your Linux-Mandrake system.\n"
-"The password must be entered twice to verify that both password entries are "
-"identical.\n"
-"\n"
-"\n"
-"Root is the system's administrator and is the only user allowed to modify "
-"the\n"
-"system configuration. Therefore, choose this password carefully. \n"
-"Unauthorized use of the root account can be extemely dangerous to the "
-"integrity\n"
-"of the system, its data and other system connected to it.\n"
-"\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. It should never be written down.\n"
-"\n"
-"\n"
-"Do not make the password too long or complicated, though: you must be able "
-"to\n"
-"remember it without too much effort."
-msgstr ""
-"Alegeþi parola pentru utilizatorul administrator al sistemului Linux.\n"
-"Parola trebuie înscrisã de douã ori pentru a se asigura cã sunt identice.\n"
-"\n"
-"\n"
-"Root e utilizatorul administrator al sistemului ºi singurul autorizat\n"
-"pentru a modifica configuraþia sistemului. Deci alegeþi cu atenþie aceastã\n"
-"parolã! Utilizarea neautorizatã a acestui cont poate fi foarte\n"
-"periculoasã pentru integritatea sistemului, pentru informaþiilor conþinute\n"
-"ºi pentru celelalte calculatoare conectate la el. Aceastã parolã trebuie sã\n"
-"fie un amestec de caractere alfanumerice ºi de cel puþin 8 caractere. Nu-l\n"
-"scrieþi NICIODATÃ pe ceva ºi nu-l faceþi prea lung sau prea greu de reþinut."
-
-#: ../../help.pm_.c:609
-msgid ""
-"To enable a more secure system, you should select \"Use shadow file\" and\n"
-"\"Use MD5 passwords\"."
-msgstr ""
-"Pentru a crea un sistem încã ºi mai sigur, ar trebui sã alegeþi \"Foloseºte\n"
-"un fiºier shadow\" ºi \"Foloseºte parole MD5\"."
-
-#: ../../help.pm_.c:613
-msgid ""
-"If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n"
-"network administrator."
-msgstr ""
-"Dacã reþeaua dumneavoastrã foloseºte NIS, selectaþi \"Foloseºte NIS\". Dacã\n"
-"nu ºtiþi exact, întrebaþi administratorul de reþea."
-
-#: ../../help.pm_.c:617
-msgid ""
-"You may now create one or more \"regular\" user account(s), as\n"
-"opposed to the \"privileged\" user account, root. You can create\n"
-"one or more account(s) for each person you want to allow to use\n"
-"the computer. Note that each user account will have its own\n"
-"preferences (graphical environment, program settings, etc.)\n"
-"and its own \"home directory\", in which these preferences are\n"
-"stored.\n"
-"\n"
-"\n"
-"First of all, create an account for yourself! Even if you will be the only "
-"user\n"
-"of the machine, you may NOT connect as root for daily use of the system: "
-"it's a\n"
-"very high security risk. Making the system unusable is very often a typo "
-"away.\n"
-"\n"
-"\n"
-"Therefore, you should connect to the system using the user account\n"
-"you will have created here, and login as root only for administration\n"
-"and maintenance purposes."
-msgstr ""
-"Puteþi crea acum unul sau mai multe conturi de utilizator \"obiºnuite\",\n"
-"în opoziþie cu contul \"privilegiat\" al utilizatorului root. Puteþi\n"
-"crea unul sau mai multe conturi pentru fiecare persoanã autorizatã sã\n"
-"se conecteze la calculator. Notaþi cã fiecare cont utilizator va avea\n"
-"propriile preferinþe (configuraþie graficã, parametrii de programe, etc.)\n"
-"ºi propriul dosar personal în \"/home\" unde toate aceste preferinþe vor fi\n"
-"stocate.\n"
-"\n"
-"\n"
-"Mai întîi creaþi un cont pentru dumneavoastrã! Chiar dacã veþi fi singurul\n"
-"utilizator al calculatorului, NU TREBUIE SÃ VÃ CONECTAÞI CA ROOT PENTRU\n"
-"SCOPURI ZILNICE LA SISTEM: pentru motive securitate. În plus, un sistem\n"
-"poate uºor deveni inutilizabil prin apãsarea unei taste greºite.\n"
-"\n"
-"\n"
-"În consecinþã, ar trebuie sã vã conectaþi la sistem folosind contul \n"
-"utilizatorului pe care l-aþi creat aici ºi sã folosiþi contul root\n"
-"numai pentru administraþie ºi scopuri de depanare."
-
-#: ../../help.pm_.c:636
-msgid ""
-"Creating a boot disk is strongly recommended. If you can't\n"
-"boot your computer, it's the only way to rescue your system without\n"
-"reinstalling it."
-msgstr ""
-
-#: ../../help.pm_.c:641
-#, fuzzy
-msgid ""
-"You need to indicate where you wish\n"
-"to place the information required to boot to GNU/Linux.\n"
-"\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of\n"
-"drive (MBR)\"."
-msgstr ""
-"Va trebui sã indicaþi unde sã puneþi informaþia necesarã pentru a porni "
-"Linux.\n"
-"\n"
-"\n"
-"În general alegeþi \"Primul sector al discului\". Alegeþi altceva doar dacã "
-"ºtiþi ce faceþi."
-
-#: ../../help.pm_.c:649
-msgid ""
-"Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-" (primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-msgstr ""
-"Alegerea obiºnuitã este \"/dev/hda\" pentru un disc maestru principal IDE\n"
-"sau \"/dev/sda\" pentru primul disc SCSI."
-
-#: ../../help.pm_.c:653
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and Grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"You may also want not to give access to these other operating systems to\n"
-"anyone, in which case you can delete the corresponding entries. But\n"
-"in this case, you will need a boot disk in order to boot them!"
-msgstr ""
-"LILO (de la LInux LOader) ºi Grub sunt gestionare de demaraj. Amîndoi sunt\n"
-"capabili sã demareze Linux sau un alt sistem prezent în calculator.\n"
-"În mod normal, aceste alte sisteme de operare sunt detectate ºi instalate\n"
-"corect. Dacã cumva nu e cazul, puteþi adãuga o intrare manual în acest\n"
-"ecran. Aveþi grijã sã alegeþi parametrii cei buni.\n"
-"\n"
-"\n"
-"Puteþi de asemenea sã interziceþi accesul acestor alte sisteme a altor \n"
-"utilizatori, caz în care ar trebui sã ºtergeþi intrãrile acestor sisteme.\n"
-"În acest ultim caz însã, veþi avea nevoie de un floppy de demaraj pentru\n"
-"a putea le demara!"
-
-#: ../../help.pm_.c:665
-#, fuzzy
-msgid ""
-"LILO and grub main options are:\n"
-"  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-"partition) that contains the boot sector. Unless you know specifically\n"
-"otherwise, choose \"/dev/hda\".\n"
-"\n"
-"\n"
-"  - Delay before booting default image: Specifies the number in tenths\n"
-"of a second the boot loader should wait before booting the first image.\n"
-"This is useful on systems that immediately boot from the hard disk after\n"
-"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-"omitted or is set to zero.\n"
-"\n"
-"\n"
-"  - Video mode: This specifies the VGA text mode that should be selected\n"
-"when booting. The following values are available: \n"
-"\n"
-"    * normal: select normal 80x25 text mode.\n"
-"\n"
-"    * <number>:  use the corresponding text mode.\n"
-"\n"
-"\n"
-"  - Clean \"/tmp\" at each boot: if you want delete all files and "
-"directories\n"
-"stored in \"/tmp\" when you boot your system, select this option.\n"
-"\n"
-"\n"
-"  - Precise RAM if needed: unfortunately, there is no standard method to ask "
-"the\n"
-"BIOS about the amount of RAM present in your computer. As consequence, Linux "
-"may\n"
-"fail to detect your amount of RAM correctly. If this is the case, you can\n"
-"specify the correct amount or RAM here. Please note that a difference of 2 "
-"or 4\n"
-"MB between detected memory and memory present in your system is normal."
-msgstr ""
-"Principalele opþiuni ale lui LILO ºi grub sunt:\n"
-" - Periferic de boot: parametreazã numele perifericului (e.g. o partiþie\n"
-"a unui disc dur) care conþine sectorul de demaraj. În mod normal e vorba\n"
-"de \"/dev/hda\".\n"
-"\n"
-"\n"
-" - Timp de aºteptare înainte de a demara imaginea din oficiu: Specificã\n"
-"numãrul de zecimi de secundã pentru a aºtepta înaintea demarãrii primei\n"
-"imagini. Acesta e foarte practic pentru sistemele care demareazã de pe\n"
-"disc dur  dupã activarea tastaturii. Gestionarul de demaraj nu aºteaptã\n"
-"deloc dacã secþiunea \"delay\" e omisã sau dacã e fixatã la zero.\n"
-"\n"
-"\n"
-" - Mod Video: Aceasta specificã modul text VGA care ar trebui selectat la\n"
-"demaraj. Urmãtoarele opþiuni sunt valabile:\n"
-"    * normal: selectaþi normal pentru un mod text de 80x25.\n"
-"    * <numãr>:  folosiþi modul text corespunzãtor."
-
-#: ../../help.pm_.c:697
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n"
-"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"Yaboot main options are:\n"
-"\n"
-"\n"
-"  - Init Message: A simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-"\n"
-"  - Boot Device: Indicate where you want to place the information required "
-"to \n"
-"boot to GNU/Linux. Generally, you will have setup a bootstrap partition "
-"earlier \n"
-"to hold this information.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: Unlike LILO, there are two delays available with \n"
-"yaboot.  The first delay is measured in seconds and at this point you can \n"
-"choose between CD, OF boot, MacOS, or Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: This timeout is similar to the LILO boot delay.  "
-"After \n"
-"selecting Linux, you will have this delay in 0.1 seconds before your "
-"default\n"
-"kernel description is selected.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: Checking this option will allow you to choose 'C' for "
-"CD at\n"
-"the first boot prompt.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: Checking this option will allow you to choose 'N' for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-"\n"
-"  - Default OS: You can select which OS will boot by default when the Open "
-"Firmware \n"
-"Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:738
-msgid ""
-"You can add additional entries for yaboot, either for other operating "
-"systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"\n"
-"For other OS's - the entry consists only of a label and the root partition.\n"
-"\n"
-"\n"
-"For Linux, there are a few possible options: \n"
-"\n"
-"\n"
-"  - Label: This is simply the name will type at the yaboot prompt to select "
-"this \n"
-"boot option.\n"
-"\n"
-"\n"
-"  - Image: This would be the name of the kernel to boot.  Typically vmlinux "
-"or\n"
-"a variation of vmlinux with an extension.\n"
-"\n"
-"\n"
-"  - Root: The root device or '/' for your Linux installation.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: On Apple hardware, the kernel append option is used quite often "
-"to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button "
-"emulation\n"
-"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The "
-"following \n"
-"are some examples:\n"
-"\n"
-"\n"
-"\t\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: This option can be used either to load initial modules, before "
-"the boot \n"
-"device is available, or to load a ramdisk image for an emergency boot "
-"situation.\n"
-"\n"
-"\n"
-"  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you "
-"should need\n"
-"to allocate a large ramdisk, this option can be used.\n"
-"\n"
-"\n"
-"  - Read-write: Normally the 'root' partition is initially brought up read-"
-"only, to allow\n"
-"a filesystem check before the system becomes 'live'.  You can override this "
-"option here.\n"
-"\n"
-"\n"
-"  - NoVideo: Should the Apple video hardware prove to be exceptionally "
-"problematic, you can\n"
-"select this option to boot in 'novideo' mode, with native framebuffer "
-"support.\n"
-"\n"
-"\n"
-"  - Default: Selects this entry as being the default Linux selection, "
-"selectable by just\n"
-"pressing ENTER at the yaboot prompt.  This entry will also be highlighted "
-"with a '*', if you\n"
-"press TAB to see the boot selections."
-msgstr ""
-
-#: ../../help.pm_.c:793
-#, fuzzy
-msgid ""
-"SILO is a bootloader for SPARC: it is able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"You may also want not to give access to these other operating systems to\n"
-"anyone, in which case you can delete the corresponding entries. But\n"
-"in this case, you will need a boot disk in order to boot them!"
-msgstr ""
-"LILO (de la LInux LOader) ºi Grub sunt gestionare de demaraj. Amîndoi sunt\n"
-"capabili sã demareze Linux sau un alt sistem prezent în calculator.\n"
-"În mod normal, aceste alte sisteme de operare sunt detectate ºi instalate\n"
-"corect. Dacã cumva nu e cazul, puteþi adãuga o intrare manual în acest\n"
-"ecran. Aveþi grijã sã alegeþi parametrii cei buni.\n"
-"\n"
-"\n"
-"Puteþi de asemenea sã interziceþi accesul acestor alte sisteme a altor \n"
-"utilizatori, caz în care ar trebui sã ºtergeþi intrãrile acestor sisteme.\n"
-"În acest ultim caz însã, veþi avea nevoie de un floppy de demaraj pentru\n"
-"a putea le demara!"
-
-#: ../../help.pm_.c:805
-#, fuzzy
-msgid ""
-"SILO main options are:\n"
-"  - Bootloader installation: Indicate where you want to place the\n"
-"information required to boot to GNU/Linux. Unless you know exactly\n"
-"what you are doing, choose \"First sector of drive (MBR)\".\n"
-"\n"
-"\n"
-"  - Delay before booting default image: Specifies the number in tenths\n"
-"of a second the boot loader should wait before booting the first image.\n"
-"This is useful on systems that immediately boot from the hard disk after\n"
-"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-"omitted or is set to zero."
-msgstr ""
-"Principalele opþiuni ale lui LILO ºi grub sunt:\n"
-" - Periferic de boot: parametreazã numele perifericului (e.g. o partiþie\n"
-"a unui disc dur) care conþine sectorul de demaraj. În mod normal e vorba\n"
-"de \"/dev/hda\".\n"
-"\n"
-"\n"
-" - Timp de aºteptare înainte de a demara imaginea din oficiu: Specificã\n"
-"numãrul de zecimi de secundã pentru a aºtepta înaintea demarãrii primei\n"
-"imagini. Acesta e foarte practic pentru sistemele care demareazã de pe\n"
-"disc dur  dupã activarea tastaturii. Gestionarul de demaraj nu aºteaptã\n"
-"deloc dacã secþiunea \"delay\" e omisã sau dacã e fixatã la zero.\n"
-"\n"
-"\n"
-" - Mod Video: Aceasta specificã modul text VGA care ar trebui selectat la\n"
-"demaraj. Urmãtoarele opþiuni sunt valabile:\n"
-"    * normal: selectaþi normal pentru un mod text de 80x25.\n"
-"    * <numãr>:  folosiþi modul text corespunzãtor."
-
-#: ../../help.pm_.c:818
-#, fuzzy
-msgid ""
-"Now it's time to configure the X Window System, which is the\n"
-"core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-"you must configure your video card and monitor. Most of these\n"
-"steps are automated, though, therefore your work may only consist\n"
-"of verifying what has been done and accept the settings :)\n"
-"\n"
-"\n"
-"When the configuration is over, X will be started (unless you\n"
-"ask DrakX not to) so that you can check and see if the\n"
-"settings suit you. If they don't, you can come back and\n"
-"change them, as many times as necessary."
-msgstr ""
-"Acum e momentul sã configuraþi Sistemul X Windows, care e inima interfaþei\n"
-"grafice din Linux (Linux GUI de la Linux Graphical User Interface). În\n"
-"acest scop trebuie sã configuraþi cartea video ºi monitorul. Majoritatea\n"
-"acestor etape sunt automatizate; deci s-ar putea ca tot ceea ce veþi avea\n"
-"de fãcut va consista în verificarea ºi acceptarea parametrilor :)\n"
-"\n"
-"Cînd aþi terminat cu configuraþia, X va fi re-demarat (dar poate îi veþi\n"
-"cere lui DrakX sã nu o facã) pentru a verifica dacã noii parametrii vã\n"
-"convin. Dacã nu vã convin, va puteþi întoarce ºi sã-i schimbaþi de cîte ori\n"
-"e necesar."
-
-#: ../../help.pm_.c:831
-msgid ""
-"If something is wrong in X configuration, use these options to correctly\n"
-"configure the X Window System."
-msgstr ""
-"Dacã ceva nu e în regulã cu configuraþia X, folosiþi aceste opþiuni pentru\n"
-"a configura în mod corect Sistemul X Windows."
-
-#: ../../help.pm_.c:835
-msgid ""
-"If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n"
-"\"No\"."
-msgstr ""
-"Dacã preferaþi sã folosiþi un login în mod grafic, selectaþi \"Da\" ºi \n"
-"\"Nu\" în celãlalt caz."
-
-#: ../../help.pm_.c:839
-msgid ""
-"You can choose a security level for your system. Please refer to the manual "
-"for complete\n"
-"  information. Basically, if you don't know what to choose, keep the default "
-"option.\n"
-msgstr ""
-
-#: ../../help.pm_.c:844
-msgid ""
-"Your system is going to reboot.\n"
-"\n"
-"After rebooting, your new Linux Mandrake system will load automatically.\n"
-"If you want to boot into another existing operating system, please read\n"
-"the additional instructions."
-msgstr ""
-"Sistemul dumneavoastrã e pe cale sã re-demareze.\n"
-"\n"
-"Dupã re-demaraj, noul sistem Linux-Mandrake sa va lansa automat. Dacã "
-"doriþi\n"
-"sã demaraþi un alt sistem de operare existent, vã rog citiþi instrucþiunile\n"
-"adiþionale."
-
-#: ../../install2.pm_.c:37
-msgid "Choose your language"
-msgstr "Alegeþi limba"
-
-#: ../../install2.pm_.c:38
-msgid "Select installation class"
-msgstr "Alegeþi tipul de instalare"
-
-#: ../../install2.pm_.c:39
-msgid "Hard drive detection"
-msgstr "Detecþia discului dur"
-
-#: ../../install2.pm_.c:40
-msgid "Configure mouse"
-msgstr "Configuraþie mouse"
-
-#: ../../install2.pm_.c:41
-msgid "Choose your keyboard"
-msgstr "Alegeþi tastatura"
-
-#: ../../install2.pm_.c:42
-#, fuzzy
-msgid "Security"
-msgstr "cîrlionþat"
-
-#: ../../install2.pm_.c:43
-msgid "Setup filesystems"
-msgstr "Instalarea fiºierelor sistem"
-
-#: ../../install2.pm_.c:44
-msgid "Format partitions"
-msgstr "Formatarea partiþiilor"
-
-#: ../../install2.pm_.c:45
-msgid "Choose packages to install"
-msgstr "Alege pachetele de instalat"
-
-#: ../../install2.pm_.c:46
-msgid "Install system"
-msgstr "Instalarea sistemului"
-
-#: ../../install2.pm_.c:47 ../../install_steps_interactive.pm_.c:894
-#: ../../install_steps_interactive.pm_.c:895
-msgid "Set root password"
-msgstr "Alegeþi parola pentru root"
-
-#: ../../install2.pm_.c:48
-msgid "Add a user"
-msgstr "Adãugaþi un utilizator"
-
-#: ../../install2.pm_.c:49
-msgid "Configure networking"
-msgstr "Configuraþie reþea"
-
-#: ../../install2.pm_.c:51 ../../install_steps_interactive.pm_.c:818
-msgid "Summary"
-msgstr ""
-
-#: ../../install2.pm_.c:52
-msgid "Configure services"
-msgstr "Configuraþia serviciilor"
-
-#: ../../install2.pm_.c:54
-msgid "Create a bootdisk"
-msgstr "Creaþi un floppy de demaraj"
-
-#: ../../install2.pm_.c:56
-msgid "Install bootloader"
-msgstr "Instalaþi un gestionar de demaraj"
-
-#: ../../install2.pm_.c:57
-msgid "Configure X"
-msgstr "Configuraþi X"
-
-#: ../../install2.pm_.c:58
-msgid "Exit install"
-msgstr "Ieºire din instalare"
-
-#: ../../install_any.pm_.c:402
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:433
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Nu pot sã folosesc difuzia fãrã nici un domeniu NIS"
-
-#: ../../install_any.pm_.c:676
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Introduceþi o dischetã în perifericul %s"
-
-#: ../../install_any.pm_.c:680
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:690
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:712
-msgid "Error reading file $f"
-msgstr "Eroare la citirea fiºierului $f"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:310
-#: ../../interactive.pm_.c:99 ../../interactive.pm_.c:114
-#: ../../interactive.pm_.c:269 ../../interactive_newt.pm_.c:166
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:356
-#: ../../my_gtk.pm_.c:617 ../../my_gtk.pm_.c:640
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../install_gtk.pm_.c:423
-#, fuzzy
-msgid "Please test the mouse"
-msgstr "Vã rog, alegeþi tipul de mouse?"
-
-#: ../../install_gtk.pm_.c:424 ../../standalone/mousedrake_.c:132
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "Vã rog, alegeþi tipul de mouse?"
-
-#: ../../install_gtk.pm_.c:425 ../../standalone/mousedrake_.c:133
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:41
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Trebuie sã aveþi o partiþie root.\n"
-"Pentru aceasta, creaþi o partiþie (sau faceþi clic pe un existentã).\n"
-"Alegeþi apoi acþiunea ``Punct de montaj'' ºi fixaþi-o la '/'"
-
-#: ../../install_interactive.pm_.c:46 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Trebuie sã aveþi o partiþie swap"
-
-#: ../../install_interactive.pm_.c:47 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"N'aveþi nici o partiþie swap\n"
-"\n"
-"Sã continui totuºi?"
-
-#: ../../install_interactive.pm_.c:68
-#, fuzzy
-msgid "Use free space"
-msgstr "Foloseºte pentru loopback"
-
-#: ../../install_interactive.pm_.c:70
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:78
-#, fuzzy
-msgid "Use existing partition"
-msgstr "Formatarea partiþiilor"
-
-#: ../../install_interactive.pm_.c:80
-#, fuzzy
-msgid "There is no existing partition to use"
-msgstr "Încercare de salvare a tabloului de partiþii"
-
-#: ../../install_interactive.pm_.c:87
-#, fuzzy
-msgid "Use the Windows partition for loopback"
-msgstr "Foloseºte pentru loopback"
-
-#: ../../install_interactive.pm_.c:90
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Ce partiþe doriþi sã folosiiþ pentru a instala Linux4Win?"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Choose the sizes"
-msgstr "Alegeþi mãrimile"
-
-#: ../../install_interactive.pm_.c:93
-msgid "Root partition size in MB: "
-msgstr "Mãrimea partiþiei root în MB:"
-
-#: ../../install_interactive.pm_.c:94
-msgid "Swap partition size in MB: "
-msgstr "Mãrimea partiþiei swap în MB:: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:105
-#, fuzzy
-msgid "Which partition do you want to resize?"
-msgstr "Ce tip de partiþie doriþi?"
-
-#: ../../install_interactive.pm_.c:107
-#, fuzzy
-msgid "Computing Windows filesystem bounds"
-msgstr "Calculeazã salturile de fiºiere FAT"
-
-#: ../../install_interactive.pm_.c:110
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:113
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:114
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"AVERTISMENT!\n"
-"\n"
-"DrakX va redimensiona acum partiþiile Windows. Aveþi grijã: aceastã "
-"operaþie\n"
-"est periculoasã. Dacã nu aþi fãcut-o deja, ar trebui mai întîi sã pãrãsiþi\n"
-"instalarea ºi ºa executaþi scandisk în Windows (ºi defrag opþional), apio\n"
-"reîncepeþi instalarea. Ar trebui de asemenea sã faceþi o copie a datelor\n"
-"dumneavoastrã. Dacã sunteþi sigur, apãsaþi Ok."
-
-#: ../../install_interactive.pm_.c:123
-#, fuzzy
-msgid "Which size do you want to keep for windows on"
-msgstr "La ce sector doriþi sa schimbaþi ?"
-
-#: ../../install_interactive.pm_.c:124
-#, fuzzy, c-format
-msgid "partition %s"
-msgstr "Partiþie"
-
-#: ../../install_interactive.pm_.c:130
-#, fuzzy, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Redimensionarea automatã a eºuat"
-
-#: ../../install_interactive.pm_.c:145
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:151
-msgid "Erase entire disk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:151
-msgid "Remove Windows(TM)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:154
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:157
-#, fuzzy, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Dupã redimensionarea partiþiei %s toate datele de pe aceasta partiþie vor fi "
-"pierdute"
-
-#: ../../install_interactive.pm_.c:165
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "Formatarea partiþiilor"
-
-#: ../../install_interactive.pm_.c:169
-msgid "Use fdisk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:172
-#, fuzzy, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Puteþi partiþiona acum discul %s dumneavoastrã dur\n"
-"Cînd aþi terminat, nu uitaþi sã înregistraþi folosind `w'"
-
-#: ../../install_interactive.pm_.c:201
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nu aveþi nici o partiþie Windows"
-
-#: ../../install_interactive.pm_.c:217
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Imposibil de adãugat o alta partiþie"
-
-#: ../../install_interactive.pm_.c:221
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy, c-format
-msgid "Partitioning failed: %s"
-msgstr "Tipul tabloul de partiþii : %s\n"
-
-#: ../../install_interactive.pm_.c:232
-msgid "Bringing up the network"
-msgstr "Configuraþie reþea"
-
-#: ../../install_interactive.pm_.c:237
-msgid "Bringing down the network"
-msgstr "Oprire reþea"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"A apãrut o eroare pe care nu ºtiu sã o interpretez în mod corect.\n"
-"Continuaþi pe riscul dumneavoastrã."
-
-#: ../../install_steps.pm_.c:203
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplicaþi pounctul de montaj %s"
-
-#: ../../install_steps.pm_.c:385
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Cîteva pachete importante nu s-au instalat corect.\n"
-"Sau aveþi o problemã cu perifericul de cdrom sau cu \n"
-"cdrom-ul propriu-zis. Folosiþi comanda \"rpm -qpl \n"
-"Mandrake/RPMS/*.rpm\" pentru a verifica cdrom-ul pe un\n"
-"sistem instalat.\n"
-
-#: ../../install_steps.pm_.c:451
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bine aþi venit la %s"
-
-#: ../../install_steps.pm_.c:634
-msgid "No floppy drive available"
-msgstr "Nici dischetã disponibilã"
-
-#: ../../install_steps_auto_install.pm_.c:51
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Începe etapa `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Alegeþi mãrimea pe care vreþi sã o instalaþi"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Mârime totalã: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:437
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versiune: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:438
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Mãrime: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:337
-#: ../../install_steps_interactive.pm_.c:520
-msgid "Choose the packages you want to install"
-msgstr "Alegeþi pachetele pe care doriþi sã le instalaþi"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../install_steps_gtk.pm_.c:340
-msgid "Info"
-msgstr "Info"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:345
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install"
-msgstr "Instalare"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:558
-#: ../../install_steps_interactive.pm_.c:675
-msgid "Installing"
-msgstr "În curs de instalare"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Asteptaþi, vã rog"
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:570
-msgid "Time remaining "
-msgstr "Timp rãmas "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Timp total "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:675
-msgid "Preparing installation"
-msgstr "Pregãtesc instalarea"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:618
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalarea pachetului  %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:695
-#: ../../install_steps_gtk.pm_.c:699
-msgid "Go on anyway?"
-msgstr "Sã continui totuºi?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:695
-msgid "There was an error ordering packages:"
-msgstr "O eroare a apãrut la ordonarea pachetelor:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Sã folosesc configuraþia existentã pentru X11?"
-
-#: ../../install_steps_gtk.pm_.c:142
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Linux-Mandrake. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:156
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Vã rog alegeþi unul din urmãtoarele tipuri de instalare"
-
-#: ../../install_steps_gtk.pm_.c:222
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Mãrimea totalã a grupurilor selectate e în jur de %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:224
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Dacã doriþi sã instalaþi mai puþin decît aceastã mãrime,\n"
-"selectaþi procentul pachetelor pe care doriþi sã le instalaþi.\n"
-"\n"
-"Un procent slab va instala numai pachetele cele mai inmportante;\n"
-"un procent de 100% va instala toate pachetele selectate."
-
-#: ../../install_steps_gtk.pm_.c:229
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Nu aveþi spaþiu pe discul dunmeavoastrã decît pentru %d%% al acestor\n"
-"pachete.\n"
-"\n"
-"Dacã doriþi sã instalaþi mai puþin decît atît,\n"
-"selectaþi procentul pachetelor pe care doriþi sãle instalaþi.\n"
-"Un procent slab nu va installa decît pachetele cele mai importante;\n"
-"un procent de %d%% va instala cît de multe pachete va fi posibil."
-
-#: ../../install_steps_gtk.pm_.c:235
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Veþi putea sã le alegeþi mai în detaliu la etapa urmãtoare."
-
-#: ../../install_steps_gtk.pm_.c:237
-msgid "Percentage of packages to install"
-msgstr "Procentul pachetelor de instalat"
-
-#: ../../install_steps_gtk.pm_.c:285 ../../install_steps_interactive.pm_.c:599
-msgid "Package Group Selection"
-msgstr "Selectarea grupurilor de pachete"
-
-#: ../../install_steps_gtk.pm_.c:305 ../../install_steps_interactive.pm_.c:614
-msgid "Individual package selection"
-msgstr "Selectare individualã a pachetelor"
-
-#: ../../install_steps_gtk.pm_.c:349
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "Expand Tree"
-msgstr "Expandaþi Arborele"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "Collapse Tree"
-msgstr "Închideþi Arborele"
-
-#: ../../install_steps_gtk.pm_.c:418
-msgid "Toggle between flat and group sorted"
-msgstr "Basculaþi între plat ºi triere în funcþie de grup"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "Bad package"
-msgstr "Pachet defectuos"
-
-#: ../../install_steps_gtk.pm_.c:436
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nume: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:439
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importanþã: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:448 ../../install_steps_interactive.pm_.c:578
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Mãrime totalã: %d / %d MB "
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Nu aveþi destul spaþiu pentru a instala acest pachet"
-
-#: ../../install_steps_gtk.pm_.c:471
-#, fuzzy
-msgid "The following packages are going to be installed"
-msgstr "Pachetele urmãtoare urmeazã sã fie dezinstalate"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "The following packages are going to be removed"
-msgstr "Urmãtoare pachete vor fi instalate/ºterse"
-
-#: ../../install_steps_gtk.pm_.c:482
-msgid "You can't select/unselect this package"
-msgstr "Nu puteþi selecta/deselecta acest pachet"
-
-#: ../../install_steps_gtk.pm_.c:501
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Acesta este un pachet indispensabil ºi nu poate fi deselectat"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "You can't unselect this package. It is already installed"
-msgstr "Nu puteþi deselecta aces pachet. E deja instalat"
-
-#: ../../install_steps_gtk.pm_.c:507
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Acest pachet trebuie actualizat\n"
-"Sunteþi sigur cã doriþi sã-l deselectaþi ?"
-
-#: ../../install_steps_gtk.pm_.c:510
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Nu puteþi deselecta acest pachet. Trebuie acualizat."
-
-#: ../../install_steps_gtk.pm_.c:563
-msgid "Estimating"
-msgstr "Estimare"
-
-#: ../../install_steps_gtk.pm_.c:582
-#, fuzzy
-msgid "Please wait, preparing installation"
-msgstr "Pregãtesc instalarea"
-
-#: ../../install_steps_gtk.pm_.c:613
-#, c-format
-msgid "%d packages"
-msgstr "%d pachete"
-
-#: ../../install_steps_gtk.pm_.c:652
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:680 ../../install_steps_interactive.pm_.c:163
-#, fuzzy
-msgid "Accept"
-msgstr "Acceptare utilizator"
-
-#: ../../install_steps_gtk.pm_.c:680 ../../install_steps_interactive.pm_.c:163
-#, fuzzy
-msgid "Refuse"
-msgstr "Redimensioneazã"
-
-#: ../../install_steps_gtk.pm_.c:681
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Schimbaþi Cd-Rom-ul!\n"
-"\n"
-"Vã rog introduceþi Cd-Rom etichetat \"%s\" ºi apoi apãsaþi Ok.\n"
-"Dacã nu-l aveþi, apãsaþi Anuleazã pentru a evita instalarea de pe acest Cd-"
-"Rom."
-
-#: ../../install_steps_gtk.pm_.c:699
-msgid "There was an error installing packages:"
-msgstr "A fost o eroare la instalarea pachetelor:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "A apãrut o eroare"
-
-#: ../../install_steps_interactive.pm_.c:55
-msgid "Please, choose a language to use."
-msgstr "Vã rog, alegeþi o limbã."
-
-#: ../../install_steps_interactive.pm_.c:56
-msgid "You can choose other languages that will be available after install"
-msgstr "Puteþi sã alegeþi alte limbi care vor fi disponibile dupã instalare"
-
-#: ../../install_steps_interactive.pm_.c:68
-#: ../../install_steps_interactive.pm_.c:613
-msgid "All"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:86
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:87
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Linux-"
-"Mandrake distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Linux-Mandrake distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Linux-Mandrake sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:182
-#: ../../install_steps_interactive.pm_.c:822
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastaturã"
-
-#: ../../install_steps_interactive.pm_.c:183
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Alegeþi tastatura."
-
-#: ../../install_steps_interactive.pm_.c:184
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:201
-msgid "Install Class"
-msgstr "Tip de instalare"
-
-#: ../../install_steps_interactive.pm_.c:201
-msgid "Which installation class do you want?"
-msgstr "Ce tip de instalare doriþi?"
-
-#: ../../install_steps_interactive.pm_.c:203
-#, fuzzy
-msgid "Install/Update"
-msgstr "Instalare/Actualizare"
-
-#: ../../install_steps_interactive.pm_.c:203
-#, fuzzy
-msgid "Is this an install or an update?"
-msgstr "Este vorba de o instalare sau de o actualizare ?"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Recommended"
-msgstr "Recomandat"
-
-#: ../../install_steps_interactive.pm_.c:215
-#: ../../install_steps_interactive.pm_.c:218
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:226
-#, fuzzy
-msgid "Update"
-msgstr "Actualizare"
-
-#: ../../install_steps_interactive.pm_.c:238 ../../standalone/mousedrake_.c:41
-msgid "Please, choose the type of your mouse."
-msgstr "Vã rog, alegeþi tipul de mouse?"
-
-#: ../../install_steps_interactive.pm_.c:244 ../../standalone/mousedrake_.c:57
-msgid "Mouse Port"
-msgstr "Port Mouse"
-
-#: ../../install_steps_interactive.pm_.c:245 ../../standalone/mousedrake_.c:58
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Pe ce port serie este conectat mouse-ul?"
-
-#: ../../install_steps_interactive.pm_.c:253
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:255
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:256
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:275
-msgid "Configuring PCMCIA cards..."
-msgstr "Configuraþie cartele PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:275
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:280
-msgid "Configuring IDE"
-msgstr "Configuraþia IDE"
-
-#: ../../install_steps_interactive.pm_.c:280
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:295
-msgid "no available partitions"
-msgstr "nici o partiþie disponibilã"
-
-#: ../../install_steps_interactive.pm_.c:298
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:306
-msgid "Choose the mount points"
-msgstr "Alegeþi punctele de montaj"
-
-#: ../../install_steps_interactive.pm_.c:323
-#, fuzzy, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Nu pot citi tabloul de partiþii, e prea deteriorat dupã mine :(\n"
-"Voi încerca sã continui ºtergînd partiþiile greºite"
-
-#: ../../install_steps_interactive.pm_.c:336
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake a eºuat la citirea corectã a tabloului de partiþii.\n"
-"Continuaþi pe riscul dumneavoastrã!"
-
-#: ../../install_steps_interactive.pm_.c:361
-msgid "Root Partition"
-msgstr "Partiþia Root"
-
-#: ../../install_steps_interactive.pm_.c:362
-msgid "What is the root partition (/) of your system?"
-msgstr "Care e partiþia root (/) a sistemului dumneavoastrã?"
-
-#: ../../install_steps_interactive.pm_.c:376
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Trebuie sã redemaraþi pentru a înregistra modificãrile tabloului de partiþii"
-
-#: ../../install_steps_interactive.pm_.c:403
-msgid "Choose the partitions you want to format"
-msgstr "Alegeþi partiþiile pe care doriþi sa le formataãi"
-
-#: ../../install_steps_interactive.pm_.c:404
-msgid "Check bad blocks?"
-msgstr "Sã verific blocurile defectuoase?"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Formatting partitions"
-msgstr "Formatarea partiþiilor"
-
-#: ../../install_steps_interactive.pm_.c:429
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Crearea ºi formatarea fiºierului %s"
-
-#: ../../install_steps_interactive.pm_.c:432
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Swap insuficient pentru a termina instalarea, mai adãugaþi ceva"
-
-#: ../../install_steps_interactive.pm_.c:438
-msgid "Looking for available packages"
-msgstr "Cãutarea pachetelor disponibile"
-
-#: ../../install_steps_interactive.pm_.c:444
-msgid "Finding packages to upgrade"
-msgstr "Cautarea pachetelor de actualizat"
-
-#: ../../install_steps_interactive.pm_.c:461
-#, fuzzy, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Sistemul dumneavoastrã nu ar destul spaþiu disponibil pentru instalare\n"
-"sau actualizare"
-
-#: ../../install_steps_interactive.pm_.c:480
-#, fuzzy, c-format
-msgid "Complete (%dMB)"
-msgstr "Normal"
-
-#: ../../install_steps_interactive.pm_.c:480
-#, fuzzy, c-format
-msgid "Minimum (%dMB)"
-msgstr "(%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:480
-#, fuzzy, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomandat"
-
-#: ../../install_steps_interactive.pm_.c:486
-#, fuzzy
-msgid "Custom"
-msgstr "Personalizat"
-
-#: ../../install_steps_interactive.pm_.c:585
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:650
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Dacã aveþi toate CD-urile din lista de mai jos, apãsaþi Ok.\n"
-"Dacã nu aveþi nici unul din aceste CD-uri, apãsaþi Anuleazã.\n"
-"Dacã nu vã lispsesc decît cîteva CD-uri, deselectaþi-le ºi faceþi click pe "
-"Ok."
-
-#: ../../install_steps_interactive.pm_.c:655
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom etichetat \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:684
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"instalarea pachetului %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:693
-msgid "Post-install configuration"
-msgstr "Configuraþie post-install"
-
-#: ../../install_steps_interactive.pm_.c:718
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Aveþi acum posibilitatea de a recupera de pe Internet programele destinate\n"
-"criptajului.\n"
-"\n"
-"AVERTISMENT:\n"
-"\n"
-"Din cauza diferitelor cerinþe generale aplicabile la aceste programe în\n"
-"funcþie de diferite jurisdicþii, clientul ºi/sau utilizatorul final al\n"
-"acestor programe ar trebui sã se asigure cã jurisdicþia îi permite sã\n"
-"foloseascã sau sã stocheze aceste programe.\n"
-"\n"
-"Încãlcarea eventualã a unei interziceri în acest domeniu ar putea sã fie\n"
-"sacþionatã sever de jurisdicþia dumneavoastrã.\n"
-"\n"
-"În nici un caz MandrakeSoft sau unul dintre fabricanþii sãi ºi/sau\n"
-"furnizorii sãi n'ar putea sã poarte responsabilitatea unor deteriorãri\n"
-"indirecte sau accidentale (incluzînd, dar fãrã as e limita la pierderi\n"
-"sau profituri, întreruperi de afaceri, pierdere a datelor comerciale ºi\n"
-"alte pierderi ºi unele indemnizãri eventuale din cauza unor decizii)\n"
-"suscitate în urma folosirii, posesiei, sau a simplei recuperãri a acestor\n"
-"programe, la care clientul sau/ºi utilizatorul final ar avea acces dupã\n"
-"acceptarea prezentului acord.\n"
-"\n"
-"\n"
-"Pentru orice întrebãri cu privire a acestui acord, vã rog contactaþi\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid "Choose a mirror from which to get the packages"
-msgstr "Alegeþi o oglindã de la care sã recuperaþi pachetele"
-
-#: ../../install_steps_interactive.pm_.c:761
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Contactarea oglinzii pentru recuperarea pachetelor disponibile"
-
-#: ../../install_steps_interactive.pm_.c:764
-msgid "Please choose the packages you want to install."
-msgstr "Vã rog alegeþi pachetele pe care doriþi sã le instalaþi"
-
-#: ../../install_steps_interactive.pm_.c:776
-#, fuzzy
-msgid "Which is your timezone?"
-msgstr "Care e folosinþa sistemului dumneavoastrã?"
-
-#: ../../install_steps_interactive.pm_.c:778
-msgid "Is your hardware clock set to GMT?"
-msgstr "Ceasul dumneavoastrã hardware e fixat la GMT?"
-
-#: ../../install_steps_interactive.pm_.c:806 ../../printer.pm_.c:22
-#: ../../printerdrake.pm_.c:415
-#, fuzzy
-msgid "Remote CUPS server"
-msgstr "Coadã distantã:"
-
-#: ../../install_steps_interactive.pm_.c:807
-#, fuzzy
-msgid "No printer"
-msgstr "Imprimantã localã"
-
-#: ../../install_steps_interactive.pm_.c:821
-#, fuzzy
-msgid "Mouse"
-msgstr "Mouse USB"
-
-#: ../../install_steps_interactive.pm_.c:823
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:824 ../../printerdrake.pm_.c:344
-msgid "Printer"
-msgstr "Imprimantã"
-
-#: ../../install_steps_interactive.pm_.c:826
-msgid "ISDN card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:829
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:832
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:862
-#, fuzzy
-msgid "Which printing system do you want to use?"
-msgstr "Ce tip de partiþie doriþi?"
-
-#: ../../install_steps_interactive.pm_.c:896
-msgid "No password"
-msgstr "Nici o parolã"
-
-#: ../../install_steps_interactive.pm_.c:901
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Aceastã parole e prea simplã (ar trebui sã fie de cel puþin %d caractere)"
-
-#: ../../install_steps_interactive.pm_.c:907
-msgid "Use NIS"
-msgstr "Foloseºte NIS"
-
-#: ../../install_steps_interactive.pm_.c:907
-msgid "yellow pages"
-msgstr "Pagini galbene"
-
-#: ../../install_steps_interactive.pm_.c:914
-msgid "Authentification NIS"
-msgstr "Autentificare NIS"
-
-#: ../../install_steps_interactive.pm_.c:915
-msgid "NIS Domain"
-msgstr "Domeniu NIS"
-
-#: ../../install_steps_interactive.pm_.c:916
-msgid "NIS Server"
-msgstr "Server NIS"
-
-#: ../../install_steps_interactive.pm_.c:951
-#, fuzzy
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"O dischetã personalizatã de demaraj permite un mod de a accede la sistemul\n"
-"vostru Linux fãrã a depinde de gestionarul de demaraj normal. Acesta este \n"
-"util dacã nu doriþi sã instalaþi LILO (sau grub) în sistem sau dacâ alte \n"
-"sisteme ºterg LILO sau dacã LILO nu funcþioneazã în sistemul dumneavoastrã.\n"
-"O dischetã personalizatã poate fi de asemena folositã ca o imagine de\n"
-"depanaj, ceea ce permite recuperãri mult mai uºoare în urmã unor pane "
-"severe.\n"
-"Doriþi sã creaþi o dischetã de demaraj pentru sistemul dumneavoastrã ?"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "First floppy drive"
-msgstr "Primul periferic de dichetã"
-
-#: ../../install_steps_interactive.pm_.c:968
-msgid "Second floppy drive"
-msgstr "Al doilea periferic de dischetã"
-
-#: ../../install_steps_interactive.pm_.c:969
-msgid "Skip"
-msgstr "Sari peste"
-
-#: ../../install_steps_interactive.pm_.c:974
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"O dischetã personalizatã de demaraj permite un mod de a accede la sistemul\n"
-"vostru Linux fãrã a depinde de gestionarul de demaraj normal. Acesta este \n"
-"util dacã nu doriþi sã instalaþi LILO (sau grub) în sistem sau dacâ alte \n"
-"sisteme ºterg LILO sau dacã LILO nu funcþioneazã în sistemul dumneavoastrã.\n"
-"O dischetã personalizatã poate fi de asemena folositã ca o imagine de\n"
-"depanaj, ceea ce permite recuperãri mult mai uºoare în urmã unor pane "
-"severe.\n"
-"Doriþi sã creaþi o dischetã de demaraj pentru sistemul dumneavoastrã ?"
-
-#: ../../install_steps_interactive.pm_.c:983
-msgid "Sorry, no floppy drive available"
-msgstr "Îmi pare rãu dar nu gãsesc nici un periferic de dischetã disponibil."
-
-#: ../../install_steps_interactive.pm_.c:987
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Alegeþi perifericul pe care-l doriþi pentru a realiza un disc de demaraj."
-
-#: ../../install_steps_interactive.pm_.c:991
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Introduceþi o dischetã în perifericul %s"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid "Creating bootdisk"
-msgstr "Crearea dischetei de demaraj"
-
-#: ../../install_steps_interactive.pm_.c:1001
-msgid "Preparing bootloader"
-msgstr "Pegãtirea gestionalului de demaraj"
-
-#: ../../install_steps_interactive.pm_.c:1010
-#, fuzzy
-msgid "Do you want to use aboot?"
-msgstr "Vreþi sã folosiþi SILO?"
-
-#: ../../install_steps_interactive.pm_.c:1013
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Eroare la instalrea lui aboot,\n"
-"sã încerc sã forþaþi instalarea chiar dacã aceasta distruge prima partiþie ?"
-
-#: ../../install_steps_interactive.pm_.c:1022
-#, fuzzy
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalarea lui LILO a eºuat. Urmãtoarea eroare a apãrut:"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1038 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Scãzut"
-
-#: ../../install_steps_interactive.pm_.c:1039 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Mediu"
-
-#: ../../install_steps_interactive.pm_.c:1040 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Ridicat"
-
-#: ../../install_steps_interactive.pm_.c:1044 ../../standalone/draksec_.c:49
-msgid "Choose security level"
-msgstr "Alegeþi nivelul de securitate"
-
-#: ../../install_steps_interactive.pm_.c:1080
-msgid "Do you want to generate an auto install floppy for linux replication?"
-msgstr "Doriþi sã creaþi un floppy pentru o instalare automatã de replicare?"
-
-#: ../../install_steps_interactive.pm_.c:1082
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Introduceþi uo dischetã goalã în perifericul %s"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "Creating auto install floppy"
-msgstr "Creati discheta de autoinstalare"
-
-#: ../../install_steps_interactive.pm_.c:1156
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Cîteva etape nu au fost completate.\n"
-"\n"
-"Chiar vreþi sã terminaþi acum?"
-
-#: ../../install_steps_interactive.pm_.c:1167
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Linux-"
-"Mandrake,\n"
-"consult the Errata available from http://www.linux-mandrake.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Linux-Mandrake User's Guide."
-msgstr ""
-"Felicitãri, instalarea e completã.\n"
-"Scoateþi media de demaraj ºi apãsaþi Enter pentru redemaraj.\n"
-"\n"
-"Pentru informaþii asupra corecþii disponibile pentru aceasta versiune\n"
-"Linux-Mandrake, consultaþi Erata disponibilã la http://www.linux-mandrake."
-"com/.\n"
-"\n"
-"Informaþiile asupra configurãrii sistemului sunt disponibile în \n"
-"capitolul referitor la post instalare din \n"
-"Oficial Linux Mandrake User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1179
-#, fuzzy
-msgid "Generate auto install floppy"
-msgstr "Creati discheta de autoinstalare"
-
-#: ../../install_steps_interactive.pm_.c:1181
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1186
-msgid "Automated"
-msgstr "Automatizat"
-
-#: ../../install_steps_interactive.pm_.c:1186
-#, fuzzy
-msgid "Replay"
-msgstr "Reîncarcã"
-
-#: ../../install_steps_interactive.pm_.c:1189
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Selectare individualã a pachetelor"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Linux-Mandrake Installation %s"
-msgstr "Instalare Linux-Mandrake %s"
-
-#: ../../install_steps_newt.pm_.c:33
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> între elemente | <Space> selecteazã | <F12> urmãtorul ecran"
-
-#: ../../interactive.pm_.c:65
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:267
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:290
-msgid "Please wait"
-msgstr "Puþinticã rãbdare"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Ambiguitate (%s), fiþi mai precis\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Alegere greºitã, încercaþi din nou\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (din oficiu %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ce alegeþi? (din oficiu %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Ce alegeþi ? (din oficiu %s  enter `niciuna' pentru niciuna) "
-
-#: ../../keyboard.pm_.c:124 ../../keyboard.pm_.c:155
-msgid "Czech (QWERTZ)"
-msgstr "Ceh (QWERTZ)"
-
-#: ../../keyboard.pm_.c:125 ../../keyboard.pm_.c:138 ../../keyboard.pm_.c:158
-msgid "German"
-msgstr "German"
-
-#: ../../keyboard.pm_.c:126
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:127 ../../keyboard.pm_.c:164
-msgid "Spanish"
-msgstr "Spaniol"
-
-#: ../../keyboard.pm_.c:128 ../../keyboard.pm_.c:165
-msgid "Finnish"
-msgstr "Finlandez"
-
-#: ../../keyboard.pm_.c:129 ../../keyboard.pm_.c:139 ../../keyboard.pm_.c:166
-msgid "French"
-msgstr "Francez"
-
-#: ../../keyboard.pm_.c:130 ../../keyboard.pm_.c:187
-msgid "Norwegian"
-msgstr "Norvegian"
-
-#: ../../keyboard.pm_.c:131
-msgid "Polish"
-msgstr "Polonez"
-
-#: ../../keyboard.pm_.c:132 ../../keyboard.pm_.c:192
-msgid "Russian"
-msgstr "Rus"
-
-#: ../../keyboard.pm_.c:133 ../../keyboard.pm_.c:203
-msgid "UK keyboard"
-msgstr "Tastatura UK"
-
-#: ../../keyboard.pm_.c:134 ../../keyboard.pm_.c:137 ../../keyboard.pm_.c:204
-msgid "US keyboard"
-msgstr "Tastatura US"
-
-#: ../../keyboard.pm_.c:141
-msgid "Armenian (old)"
-msgstr "Armenian (vechi)"
-
-#: ../../keyboard.pm_.c:142
-msgid "Armenian (typewriter)"
-msgstr "Armenian (maºinã de scris)"
-
-#: ../../keyboard.pm_.c:143
-msgid "Armenian (phonetic)"
-msgstr "Armenian (fonetic)"
-
-#: ../../keyboard.pm_.c:147
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:148
-msgid "Azerbaidjani (cyrillic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:149
-msgid "Belgian"
-msgstr "Belgian"
-
-#: ../../keyboard.pm_.c:150
-msgid "Bulgarian"
-msgstr "Bulgar"
-
-#: ../../keyboard.pm_.c:151
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilian (ABNT-2)"
-
-#: ../../keyboard.pm_.c:152
-msgid "Belarusian"
-msgstr "Bielorus"
-
-#: ../../keyboard.pm_.c:153
-msgid "Swiss (German layout)"
-msgstr "Elveþian (dispoziþie germanâ)"
-
-#: ../../keyboard.pm_.c:154
-msgid "Swiss (French layout)"
-msgstr "Elveþian (dispoziþie francezâ)"
-
-#: ../../keyboard.pm_.c:156
-msgid "Czech (QWERTY)"
-msgstr "Ceh (QWERTY)"
-
-#: ../../keyboard.pm_.c:157
-msgid "Czech (Programmers)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:159
-msgid "German (no dead keys)"
-msgstr "German (fãra taste moarte)"
-
-#: ../../keyboard.pm_.c:160
-msgid "Danish"
-msgstr "Danez"
-
-#: ../../keyboard.pm_.c:161
-#, fuzzy
-msgid "Dvorak (US)"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:162
-#, fuzzy
-msgid "Dvorak (Norwegian)"
-msgstr "Norvegian"
-
-#: ../../keyboard.pm_.c:163
-msgid "Estonian"
-msgstr "Estonian"
-
-#: ../../keyboard.pm_.c:167
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgian (dispoziþie \"Rusã\")"
-
-#: ../../keyboard.pm_.c:168
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgian (dispoziþie \"Latinã\")"
-
-#: ../../keyboard.pm_.c:169
-msgid "Greek"
-msgstr "Grec"
-
-#: ../../keyboard.pm_.c:170
-msgid "Hungarian"
-msgstr "Ungar"
-
-#: ../../keyboard.pm_.c:171
-msgid "Croatian"
-msgstr "Croat"
-
-#: ../../keyboard.pm_.c:172
-msgid "Israeli"
-msgstr "Izraelian"
-
-#: ../../keyboard.pm_.c:173
-msgid "Israeli (Phonetic)"
-msgstr "Izraelian (fonetic)"
-
-#: ../../keyboard.pm_.c:174
-#, fuzzy
-msgid "Iranian"
-msgstr "Ukrainian"
-
-#: ../../keyboard.pm_.c:175
-msgid "Icelandic"
-msgstr "Islandez"
-
-#: ../../keyboard.pm_.c:176
-msgid "Italian"
-msgstr "Italian"
-
-#: ../../keyboard.pm_.c:177
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:178
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Tastatura UK"
-
-#: ../../keyboard.pm_.c:179
-msgid "Latin American"
-msgstr "Latin American"
-
-#: ../../keyboard.pm_.c:180
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:181
-msgid "Dutch"
-msgstr "Olandez"
-
-#: ../../keyboard.pm_.c:182
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituanian AZERTY (vechi)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituanian AZERTY (nou)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituanian QWERTY"
-
-#: ../../keyboard.pm_.c:186
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lithuanian \"fonetic\" QWERTY"
-
-#: ../../keyboard.pm_.c:188
-msgid "Polish (qwerty layout)"
-msgstr "Polonez (dispoziþie qwerty)"
-
-#: ../../keyboard.pm_.c:189
-msgid "Polish (qwertz layout)"
-msgstr "Polonez (dispoziþie qwertz)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Portuguese"
-msgstr "Portughez"
-
-#: ../../keyboard.pm_.c:191
-msgid "Canadian (Quebec)"
-msgstr "Canadian (Quebec)"
-
-#: ../../keyboard.pm_.c:193
-msgid "Russian (Yawerty)"
-msgstr "us (Yawerty)"
-
-#: ../../keyboard.pm_.c:194
-msgid "Swedish"
-msgstr "Suedez"
-
-#: ../../keyboard.pm_.c:195
-msgid "Slovenian"
-msgstr "Sloven"
-
-#: ../../keyboard.pm_.c:196
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovac (QWERTZ)"
-
-#: ../../keyboard.pm_.c:197
-msgid "Slovakian (QWERTY)"
-msgstr "Slovac (QWERTY)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Slovakian (Programmers)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:199
-msgid "Thai keyboard"
-msgstr "Tastaturã Thai"
-
-#: ../../keyboard.pm_.c:200
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turc (tradiþional model \"F\")"
-
-#: ../../keyboard.pm_.c:201
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turc (model \"Q\" modern)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Ukrainian"
-msgstr "Ukrainian"
-
-#: ../../keyboard.pm_.c:205
-msgid "US keyboard (international)"
-msgstr "Tastaturã US (internaþional)"
-
-#: ../../keyboard.pm_.c:206
-#, fuzzy
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Lituanian QWERTY"
-
-#: ../../keyboard.pm_.c:207
-#, fuzzy
-msgid "Yugoslavian (latin/cyrillic)"
-msgstr "Iugoslav (dispoziþie latinâ)"
-
-#: ../../lvm.pm_.c:70
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Mouse - Sun"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-#, fuzzy
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Mouse PS/2 generic"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Generic"
-
-#: ../../mouse.pm_.c:45
-#, fuzzy
-msgid "Wheel"
-msgstr "nivel"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "serie"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Mouse generic cu 2 butoane"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Mouse generic cu 3 butoane"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serie, tip vechi C7)"
-
-#: ../../mouse.pm_.c:65
-#, fuzzy
-msgid "busmouse"
-msgstr "Fãrã mouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "nici unul"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Fãrã mouse"
-
-#: ../../my_gtk.pm_.c:356
-#, fuzzy
-msgid "Finish"
-msgstr "Finlandez"
-
-#: ../../my_gtk.pm_.c:356
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:357
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:617
-msgid "Is this correct?"
-msgstr "E corect ?"
-
-#: ../../netconnect.pm_.c:143
-#, fuzzy
-msgid "Internet configuration"
-msgstr "Configuraþie proxy"
-
-#: ../../netconnect.pm_.c:144
-#, fuzzy
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Doriþi sã testaþi configuraþia ?"
-
-#: ../../netconnect.pm_.c:148
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "Configuraþie reþea"
-
-#: ../../netconnect.pm_.c:154 ../../standalone/draknet_.c:196
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "Pe ce disc doriþi sã schimbaþi ?"
-
-#: ../../netconnect.pm_.c:155
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../netconnect.pm_.c:156 ../../standalone/draknet_.c:196
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr "Nume de conexiune"
-
-#: ../../netconnect.pm_.c:161 ../../netconnect.pm_.c:904
-#: ../../netconnect.pm_.c:934 ../../netconnect.pm_.c:1012
-msgid "Network Configuration"
-msgstr "Configuraþia reþelei"
-
-#: ../../netconnect.pm_.c:222 ../../netconnect.pm_.c:266
-#: ../../netconnect.pm_.c:276 ../../netconnect.pm_.c:283
-#: ../../netconnect.pm_.c:293
-#, fuzzy
-msgid "ISDN Configuration"
-msgstr "Configuraþie"
-
-#: ../../netconnect.pm_.c:222
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../netconnect.pm_.c:236
-#, fuzzy
-msgid "Connection Configuration"
-msgstr "Configuraþie proxy"
-
-#: ../../netconnect.pm_.c:237
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../netconnect.pm_.c:239 ../../standalone/draknet_.c:552
-msgid "Card IRQ"
-msgstr ""
-
-#: ../../netconnect.pm_.c:240 ../../standalone/draknet_.c:553
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:241 ../../standalone/draknet_.c:554
-msgid "Card IO"
-msgstr ""
-
-#: ../../netconnect.pm_.c:242 ../../standalone/draknet_.c:555
-msgid "Card IO_0"
-msgstr ""
-
-#: ../../netconnect.pm_.c:243 ../../standalone/draknet_.c:556
-msgid "Card IO_1"
-msgstr ""
-
-#: ../../netconnect.pm_.c:244 ../../standalone/draknet_.c:557
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../netconnect.pm_.c:245 ../../standalone/draknet_.c:558
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:246 ../../standalone/draknet_.c:559
-#, fuzzy
-msgid "Provider phone number"
-msgstr "Numãr de telefon"
-
-#: ../../netconnect.pm_.c:247
-msgid "Provider dns 1"
-msgstr ""
-
-#: ../../netconnect.pm_.c:248
-msgid "Provider dns 2"
-msgstr ""
-
-#: ../../netconnect.pm_.c:249 ../../standalone/draknet_.c:564
-#, fuzzy
-msgid "Dialing mode"
-msgstr "Nume de domeniu"
-
-#: ../../netconnect.pm_.c:250 ../../standalone/draknet_.c:562
-#, fuzzy
-msgid "Account Login (user name)"
-msgstr "Punct de montaj"
-
-#: ../../netconnect.pm_.c:251 ../../standalone/draknet_.c:563
-#, fuzzy
-msgid "Account Password"
-msgstr "Parola"
-
-#: ../../netconnect.pm_.c:261
-msgid "Europe"
-msgstr ""
-
-#: ../../netconnect.pm_.c:261
-msgid "Europe (EDSS1)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:263
-#, fuzzy
-msgid "Rest of the world"
-msgstr "Test de configuraþie"
-
-#: ../../netconnect.pm_.c:263
-msgid ""
-"Rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:267
-#, fuzzy
-msgid "Which protocol do you want to use ?"
-msgstr "Ce tip de partiþie doriþi?"
-
-#: ../../netconnect.pm_.c:277
-#, fuzzy
-msgid "What kind of card do you have?"
-msgstr "Ce tip de imprimanta aveþi?"
-
-#: ../../netconnect.pm_.c:278
-msgid "I don't know"
-msgstr ""
-
-#: ../../netconnect.pm_.c:278
-#, fuzzy
-msgid "ISA / PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../netconnect.pm_.c:278
-#, fuzzy
-msgid "PCI"
-msgstr "PCMCIA"
-
-#: ../../netconnect.pm_.c:284
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:288
-msgid "Abort"
-msgstr ""
-
-#: ../../netconnect.pm_.c:288
-#, fuzzy
-msgid "Continue"
-msgstr "Continuaþi totuºi?"
-
-#: ../../netconnect.pm_.c:294
-#, fuzzy
-msgid "Which is your ISDN card ?"
-msgstr "Care e zona dumneavoastrã orarã?"
-
-#: ../../netconnect.pm_.c:314
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../netconnect.pm_.c:323
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../netconnect.pm_.c:371
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../netconnect.pm_.c:375 ../../standalone/drakgw_.c:232
-#, fuzzy
-msgid "Choose the network interface"
-msgstr "Alegeþi noua mãrime"
-
-#: ../../netconnect.pm_.c:376
-#, fuzzy
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Pe ce port serie este conectat mouse-ul?"
-
-#: ../../netconnect.pm_.c:385 ../../netconnect.pm_.c:700
-#: ../../netconnect.pm_.c:845 ../../standalone/drakgw_.c:223
-msgid "Network interface"
-msgstr ""
-
-#: ../../netconnect.pm_.c:386
-msgid ""
-"\n"
-"Do you agree?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:386
-#, fuzzy
-msgid "I'm about to restart the network device:\n"
-msgstr "Doriþi sã testaþi configuraþia ?"
-
-#: ../../netconnect.pm_.c:484
-#, fuzzy
-msgid "ADSL configuration"
-msgstr "Configuraþie"
-
-#: ../../netconnect.pm_.c:485
-#, fuzzy
-msgid "Do you want to start your connection at boot?"
-msgstr "Doriti sã folosiþi aboot?"
-
-#: ../../netconnect.pm_.c:620
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Pe ce port serial este conectat modemul dumneavoastrã?"
-
-#: ../../netconnect.pm_.c:625
-msgid "Dialup options"
-msgstr "Opþuni de telefonie"
-
-#: ../../netconnect.pm_.c:626 ../../standalone/draknet_.c:566
-msgid "Connection name"
-msgstr "Nume de conexiune"
-
-#: ../../netconnect.pm_.c:627 ../../standalone/draknet_.c:567
-#, fuzzy
-msgid "Phone number"
-msgstr "Numãr de telefon"
-
-#: ../../netconnect.pm_.c:628 ../../standalone/draknet_.c:568
-msgid "Login ID"
-msgstr "ID de login"
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Authentication"
-msgstr "Autentificare"
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Script-based"
-msgstr "Bazat-pe-un-script"
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Terminal-based"
-msgstr "Bazat-pe-un-terminal"
-
-#: ../../netconnect.pm_.c:631 ../../standalone/draknet_.c:571
-#, fuzzy
-msgid "Domain name"
-msgstr "Nume de conexiune"
-
-#: ../../netconnect.pm_.c:632 ../../standalone/draknet_.c:572
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Primul server DNS"
-
-#: ../../netconnect.pm_.c:633 ../../standalone/draknet_.c:573
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Al doilea server DNS"
-
-#: ../../netconnect.pm_.c:701
-msgid ""
-"I'm about to restart the network device $netc->{NET_DEVICE}. Do you agree?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:745
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../netconnect.pm_.c:745 ../../netconnect.pm_.c:748
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Configuraþie reþea"
-
-#: ../../netconnect.pm_.c:745
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Pe ce disc doriþi sã schimbaþi ?"
-
-#: ../../netconnect.pm_.c:748
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr "Nume de conexiune"
-
-#: ../../netconnect.pm_.c:748
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "Pe ce disc doriþi sã schimbaþi ?"
-
-#: ../../netconnect.pm_.c:752 ../../standalone/net_monitor_.c:81
-#, fuzzy
-msgid "Connect to Internet"
-msgstr "Nume de conexiune"
-
-#: ../../netconnect.pm_.c:754
-#, fuzzy
-msgid "Disconnect from Internet"
-msgstr "Nume de conexiune"
-
-#: ../../netconnect.pm_.c:756
-#, fuzzy
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Configuraþie reþea"
-
-#: ../../netconnect.pm_.c:759
-#, fuzzy
-msgid "Internet connection & configuration"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../netconnect.pm_.c:811 ../../netconnect.pm_.c:961
-#: ../../netconnect.pm_.c:971 ../../netconnect.pm_.c:986
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "Configuraþia reþelei"
-
-#: ../../netconnect.pm_.c:812
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "Expert"
-
-#: ../../netconnect.pm_.c:812
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../netconnect.pm_.c:812
-#, fuzzy
-msgid "What kind is your ISDN connection?"
-msgstr "La ce port serial este conectat mouse-ul?"
-
-#: ../../netconnect.pm_.c:833 ../../netconnect.pm_.c:882
-#, fuzzy
-msgid "Connect to the Internet"
-msgstr "Nume de conexiune"
-
-#: ../../netconnect.pm_.c:834
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../netconnect.pm_.c:836
-msgid "use dhcp"
-msgstr ""
-
-#: ../../netconnect.pm_.c:836
-msgid "use pppoe"
-msgstr ""
-
-#: ../../netconnect.pm_.c:836
-msgid "use pptp"
-msgstr ""
-
-#: ../../netconnect.pm_.c:846
-#, fuzzy, c-format
-msgid "I'm about to restart the network device %s. Do you agree?"
-msgstr "Doriþi sã testaþi configuraþia ?"
-
-#: ../../netconnect.pm_.c:883
-#, fuzzy
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "Ce tip de partiþie doriþi?"
-
-#: ../../netconnect.pm_.c:900
-#, fuzzy
-msgid "Network configuration"
-msgstr "Configuraþia reþelei"
-
-#: ../../netconnect.pm_.c:901
-#, fuzzy
-msgid "Do you want to restart the network"
-msgstr "Doriþi sã testaþi configuraþia ?"
-
-#: ../../netconnect.pm_.c:904
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Doriþi sã testaþi configuraþia ?"
-
-#: ../../netconnect.pm_.c:935
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:962
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:964
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Alegeþi noua mãrime"
-
-#: ../../netconnect.pm_.c:965
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../netconnect.pm_.c:971 ../../printerdrake.pm_.c:19
-msgid "Detecting devices..."
-msgstr "Detecþia perifericelor..."
-
-#: ../../netconnect.pm_.c:978
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "Configuraþie reþea"
-
-#: ../../netconnect.pm_.c:978
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Duplicaþi pounctul de montaj %s"
-
-#: ../../netconnect.pm_.c:979
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../netconnect.pm_.c:979
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../netconnect.pm_.c:980
-#, fuzzy
-msgid "DSL (or ADSL) connection"
-msgstr "Configuraþie reþea"
-
-#: ../../netconnect.pm_.c:980
-#, c-format
-msgid "detected on interface %s"
-msgstr ""
-
-#: ../../netconnect.pm_.c:981
-#, fuzzy
-msgid "Cable connection"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../netconnect.pm_.c:982
-#, fuzzy
-msgid "LAN connection"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../netconnect.pm_.c:982
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../netconnect.pm_.c:987
-#, fuzzy
-msgid "How do you want to connect to the Internet?"
-msgstr "Pe ce disc doriþi sã schimbaþi ?"
-
-#: ../../netconnect.pm_.c:1004
-msgid ""
-"Congratulation, The network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system."
-msgstr ""
-
-#: ../../netconnect.pm_.c:1007
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-
-#: ../../network.pm_.c:253
-msgid "no network card found"
-msgstr "n'am gãsit nici o carte de reþea"
-
-#: ../../network.pm_.c:277 ../../network.pm_.c:387
-msgid "Configuring network"
-msgstr "Configuraþie reþea"
-
-#: ../../network.pm_.c:278
-#, fuzzy
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Vã rog intraþi numele calculatorului.\n"
-"Numele calculatorului ar trebui sã fie un nume întreg-calificat,\n"
-"ca de exemplu ``calculatorulmeu.laboratorulmeu.întreprindereamea.com''.\n"
-"Puteþi de asemenea intra adresa IP a pasarelei dacã aveþi una"
-
-#: ../../network.pm_.c:282 ../../network.pm_.c:392
-#, fuzzy
-msgid "Host name"
-msgstr "Numele calculatorului:"
-
-#: ../../network.pm_.c:319
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network.pm_.c:324
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Vã rog intraþi configuraþia IP pentru acest calculator.\n"
-"Fiecare rubrica va trebui sa fie completatã ca o adresã IP în format\n"
-"zecimal-punctat (de exemplu 192.168.1.55)."
-
-#: ../../network.pm_.c:333 ../../network.pm_.c:334
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Configuraþia cãrþii de reþea %s"
-
-#: ../../network.pm_.c:334
-msgid " (driver $module)"
-msgstr ""
-
-#: ../../network.pm_.c:336 ../../standalone/draknet_.c:231
-#: ../../standalone/draknet_.c:427
-#, fuzzy
-msgid "IP address"
-msgstr "Adresã IP"
-
-#: ../../network.pm_.c:337 ../../standalone/draknet_.c:428
-#, fuzzy
-msgid "Netmask"
-msgstr "Mascã de reþea:"
-
-#: ../../network.pm_.c:338
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network.pm_.c:338
-msgid "Automatic IP"
-msgstr "IP automat"
-
-#: ../../network.pm_.c:359 ../../printerdrake.pm_.c:102
-#: ../../printerdrake.pm_.c:425
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Adresa IP ar trebui sã fie în formatul 1.2.3.4"
-
-#: ../../network.pm_.c:388
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Vã rog intraþi numele calculatorului.\n"
-"Numele calculatorului ar trebui sã fie un nume întreg-calificat,\n"
-"ca de exemplu ``calculatorulmeu.laboratorulmeu.întreprindereamea.com''.\n"
-"Puteþi de asemenea intra adresa IP a pasarelei dacã aveþi una"
-
-#: ../../network.pm_.c:393
-msgid "DNS server"
-msgstr "Server DNS"
-
-#: ../../network.pm_.c:394 ../../standalone/draknet_.c:565
-msgid "Gateway"
-msgstr "Pasarelã"
-
-#: ../../network.pm_.c:396
-msgid "Gateway device"
-msgstr "Periferic pasarelã"
-
-#: ../../network.pm_.c:407
-#, fuzzy
-msgid "Proxies configuration"
-msgstr "Configuraþie post-install"
-
-#: ../../network.pm_.c:408
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network.pm_.c:409
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network.pm_.c:412
-msgid "Proxy should be http://..."
-msgstr "Proxy-ul ar trebui sã fie http://..."
-
-#: ../../network.pm_.c:413
-msgid "Proxy should be ftp://..."
-msgstr "Proxy-ul ar trebui sã fie ftp://..."
-
-#: ../../partition_table.pm_.c:563
-msgid "Extended partition not supported on this platform"
-msgstr "Partiþiile extended nu sunt suportatet pe aceastã platformã "
-
-#: ../../partition_table.pm_.c:581
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Aveþi o gaurã în tabloul de partiþii dar nu pot sã o folosesc.\n"
-"Singura soluþie e sã deplasaþi partiþia principalã pentru a avea gaura "
-"lîngãpartiþia extinsã"
-
-#: ../../partition_table.pm_.c:675
-#, c-format
-msgid "Error reading file %s"
-msgstr "Eroare la citirea fiºierului %s"
-
-#: ../../partition_table.pm_.c:682
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restaurarea din fiºierul %s a eºuat: %s"
-
-#: ../../partition_table.pm_.c:684
-msgid "Bad backup file"
-msgstr "Backup defectuos"
-
-#: ../../partition_table.pm_.c:706
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Eroare la scrierea în fiºierul %s"
-
-#: ../../partition_table_raw.pm_.c:161
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "trebuie avut"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "important"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "foarte simpatic"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "simpatic: "
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "poate"
-
-#: ../../printer.pm_.c:20
-msgid "Local printer"
-msgstr "Imprimantã localã"
-
-#: ../../printer.pm_.c:21
-#, fuzzy
-msgid "Remote printer"
-msgstr "Opþiuni pentru imprimanta lpd distantã"
-
-#: ../../printer.pm_.c:23
-#, fuzzy
-msgid "Remote lpd server"
-msgstr "lpd distant:"
-
-#: ../../printer.pm_.c:24
-#, fuzzy
-msgid "Network printer (socket)"
-msgstr "Opþiunea imprimantei NetWare"
-
-#: ../../printer.pm_.c:25
-msgid "SMB/Windows 95/98/NT"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:26
-msgid "NetWare"
-msgstr "NetWare"
-
-#: ../../printer.pm_.c:27 ../../printerdrake.pm_.c:158
-#: ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Printer Device URI"
-msgstr "Periferic imprimantã:"
-
-#: ../../printerdrake.pm_.c:19
-msgid "Test ports"
-msgstr "Test porturi"
-
-#: ../../printerdrake.pm_.c:40
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "O imprimantã, modelul \"%s\", a fost detactã în"
-
-#: ../../printerdrake.pm_.c:52
-msgid "Local Printer Device"
-msgstr "Periferic local de imprimantã"
-
-#: ../../printerdrake.pm_.c:53
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"La ce periferic aþi conectat imprimanta  \n"
-"(notaþi cã /dev/lp0 e echivalent cu LPT1:)?\n"
-
-#: ../../printerdrake.pm_.c:55
-msgid "Printer Device"
-msgstr "Periferic imprimantã:"
-
-#: ../../printerdrake.pm_.c:74
-msgid "Remote lpd Printer Options"
-msgstr "Opþiuni pentru imprimanta lpd distantã"
-
-#: ../../printerdrake.pm_.c:75
-msgid ""
-"To use a remote lpd print queue, you need to supply\n"
-"the hostname of the printer server and the queue name\n"
-"on that server which jobs should be placed in."
-msgstr ""
-"pentru a folosi a coadã de impresie lpd distantã, aveþi nevoie sã furnizaþi\n"
-"numele calculatorului serverului de imprimantã ãi lista de aºteptare"
-
-#: ../../printerdrake.pm_.c:78
-msgid "Remote hostname"
-msgstr "Numele calculator distant"
-
-#: ../../printerdrake.pm_.c:79
-msgid "Remote queue"
-msgstr "Coadã distantã:"
-
-#: ../../printerdrake.pm_.c:88
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opþiuni pentru imprimanta SMB/Windows 95/NT"
-
-#: ../../printerdrake.pm_.c:89
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Pentru a imprima  pe o imprimantã SMB, aveþi nevoie sã furnizaþi\n"
-"numele calculatorului SMB (acesta nu este întotdeauna numele maºinii\n"
-"TCP/IP) si probabil adresa IP a serverului de imprimantã, cît ºi \n"
-"numele de access ºi numele de utilizator, parola ºi informaþia grupului de "
-"lucru."
-
-#: ../../printerdrake.pm_.c:94
-msgid "SMB server host"
-msgstr "Numele serverului SMB"
-
-#: ../../printerdrake.pm_.c:95
-msgid "SMB server IP"
-msgstr "Adresa IP a serverului SMB"
-
-#: ../../printerdrake.pm_.c:96
-msgid "Share name"
-msgstr "Numele de access"
-
-#: ../../printerdrake.pm_.c:99
-msgid "Workgroup"
-msgstr "Numele de grup"
-
-#: ../../printerdrake.pm_.c:124
-msgid "NetWare Printer Options"
-msgstr "Opþiunea imprimantei NetWare"
-
-#: ../../printerdrake.pm_.c:125
-msgid ""
-"To print to a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Pentru a imprima pe o imprimantã NetWare, trebuie sã furnizaþi\n"
-"numele serverului NetWare (nu e întotdeauna acelaºi cu cel TCP/IP)\n"
-"cît ºi numele listei de aºteptare ºi eventual utilizatorii care vor avea\n"
-"access ºi parolele."
-
-#: ../../printerdrake.pm_.c:129
-msgid "Printer Server"
-msgstr "Server de imprimantã"
-
-#: ../../printerdrake.pm_.c:130
-msgid "Print Queue Name"
-msgstr "Lista de aºteptare a imprimantei"
-
-#: ../../printerdrake.pm_.c:142
-#, fuzzy
-msgid "Socket Printer Options"
-msgstr "Opþiunea imprimantei NetWare"
-
-#: ../../printerdrake.pm_.c:143
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"hostname of the printer and optionally the port number."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:145
-#, fuzzy
-msgid "Printer Hostname"
-msgstr "Opþiuni imprimantã"
-
-#: ../../printerdrake.pm_.c:146 ../../printerdrake.pm_.c:422
-#, fuzzy
-msgid "Port"
-msgstr "Slab"
-
-#: ../../printerdrake.pm_.c:159
-msgid "You can specify directly the URI to access the printer with CUPS."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:192 ../../printerdrake.pm_.c:244
-msgid "What type of printer do you have?"
-msgstr "Ce tip de imprimanta aveþi?"
-
-#: ../../printerdrake.pm_.c:204 ../../printerdrake.pm_.c:305
-msgid "Do you want to test printing?"
-msgstr "Doriþi sã testaþi imprimarea ?"
-
-#: ../../printerdrake.pm_.c:207 ../../printerdrake.pm_.c:316
-msgid "Printing test page(s)..."
-msgstr "Imprimarea pagin(ei/lor) de test"
-
-#: ../../printerdrake.pm_.c:214 ../../printerdrake.pm_.c:324
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer daemon.\n"
-"This may take a little time before printer start.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-"Does it work properly?"
-msgstr ""
-"Pagin(a/ile) de test a/au fost trimisã la procesul de impresie.\n"
-"Aceasta va dura puþin timp înaintea pornirii imprimãrii\n"
-"Starea Imprimãrii:\n"
-"%s\n"
-"\n"
-"Funcþioneazã cum trebuie?"
-
-#: ../../printerdrake.pm_.c:218 ../../printerdrake.pm_.c:328
-msgid ""
-"Test page(s) have been sent to the printer daemon.\n"
-"This may take a little time before printer start.\n"
-"Does it work properly?"
-msgstr ""
-"Pagin(a/ile) de test a/au fost trimisã la procesul de impresie.\n"
-"Aceasta va dura puþin timp înaintea pornirii imprimãrii\n"
-"Funcþioneazã cum trebuie?"
-
-#: ../../printerdrake.pm_.c:234
-msgid "Yes, print ASCII test page"
-msgstr "Da, imprimã o paginã de test ASCII"
-
-#: ../../printerdrake.pm_.c:235
-msgid "Yes, print PostScript test page"
-msgstr "Da, imprimã o pagina de test Postscript"
-
-#: ../../printerdrake.pm_.c:236
-msgid "Yes, print both test pages"
-msgstr "Da, imprimã amîndouã paginile de test"
-
-#: ../../printerdrake.pm_.c:243
-msgid "Configure Printer"
-msgstr "Configuraþia imprimantei"
-
-#: ../../printerdrake.pm_.c:273
-msgid "Printer options"
-msgstr "Opþiuni imprimantã"
-
-#: ../../printerdrake.pm_.c:274
-msgid "Paper Size"
-msgstr "Mãrimea hîrtiei"
-
-#: ../../printerdrake.pm_.c:275
-msgid "Eject page after job?"
-msgstr "Ejectarea paginei dupã lucru?"
-
-#: ../../printerdrake.pm_.c:280
-msgid "Uniprint driver options"
-msgstr "Opþiuni pilot Uniprint"
-
-#: ../../printerdrake.pm_.c:281
-msgid "Color depth options"
-msgstr "Opþiuni pentru culori:"
-
-#: ../../printerdrake.pm_.c:283
-msgid "Print text as PostScript?"
-msgstr "Imprimã text ca Postscript"
-
-#: ../../printerdrake.pm_.c:285
-msgid "Fix stair-stepping text?"
-msgstr "Reparã efectul de scarã al textului"
-
-#: ../../printerdrake.pm_.c:287
-msgid "Number of pages per output pages"
-msgstr "Numãr de pagini"
-
-#: ../../printerdrake.pm_.c:288
-msgid "Right/Left margins in points (1/72 of inch)"
-msgstr "Marginile Dreapta/Stînga în puncte (1/72 inci)"
-
-#: ../../printerdrake.pm_.c:289
-msgid "Top/Bottom margins in points (1/72 of inch)"
-msgstr "Marginile Sus/Jos în puncte (1/72 inci)"
-
-#: ../../printerdrake.pm_.c:291
-msgid "Extra GhostScript options"
-msgstr "Opþiuni Gostscript suplimentare"
-
-#: ../../printerdrake.pm_.c:293
-msgid "Extra Text options"
-msgstr "Opþinuni Text suplimentare"
-
-#: ../../printerdrake.pm_.c:295
-msgid "Reverse page order"
-msgstr "incerseazã ordinea paginilor"
-
-#: ../../printerdrake.pm_.c:345
-msgid "Would you like to configure a printer?"
-msgstr "Doriþi sã configuraþi o imprimantã?"
-
-#: ../../printerdrake.pm_.c:351
-msgid ""
-"Here are the following print queues.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Iatã urmãtoarele cozi de imprimare\n"
-"Puteþi sã adãugaþi altele sau sã modificaþi cele existente."
-
-#: ../../printerdrake.pm_.c:370
-#, fuzzy
-msgid "CUPS starting"
-msgstr "Estimare"
-
-#: ../../printerdrake.pm_.c:370
-msgid "Reading CUPS drivers database..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:384 ../../printerdrake.pm_.c:450
-#: ../../printerdrake.pm_.c:471 ../../printerdrake.pm_.c:479
-msgid "Select Printer Connection"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../printerdrake.pm_.c:385 ../../printerdrake.pm_.c:472
-msgid "How is the printer connected?"
-msgstr "Cum e conectatã imprimanta ?"
-
-#: ../../printerdrake.pm_.c:392
-#, fuzzy
-msgid "Select Remote Printer Connection"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"With a remote CUPS server, you do not have to configure\n"
-"any printer here; printers will be automatically detected.\n"
-"In case of doubt, select \"Remote CUPS server\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-"With a remote CUPS server, you do not have to configure\n"
-"any printer here; printers will be automatically detected\n"
-"unless you have a server on a different network; in the\n"
-"latter case, you have to give the CUPS server IP address\n"
-"and optionally the port number."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "Adresa IP a serverului SMB"
-
-#: ../../printerdrake.pm_.c:429
-msgid "Port number should be numeric"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:451 ../../printerdrake.pm_.c:480
-msgid "Remove queue"
-msgstr "ªterge coada"
-
-#: ../../printerdrake.pm_.c:454
-msgid ""
-"Name of printer should contains only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:461
-#, fuzzy
-msgid ""
-"Every printer need a name (for example lp).\n"
-"Other parameters such as the description of the printer or its location\n"
-"can be defined. What name should be used for this printer and\n"
-"how is the printer connected?"
-msgstr ""
-"Fiecare coadã (la care activitãþile de imprimare sunt trimise) are nevoie\n"
-"de un nume (adesea lp) ºi de un directoriu de spool asociat. Ce nume\n"
-"ºi directoriu doriþi sã utilizaþi pentru aceastã coadã ºi cum e "
-"conectatãimprimanta?"
-
-#: ../../printerdrake.pm_.c:465
-#, fuzzy
-msgid "Name of printer"
-msgstr "Imprimantã localã"
-
-#: ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Description"
-msgstr "Specificaþi opþiunile"
-
-#: ../../printerdrake.pm_.c:467
-#, fuzzy
-msgid "Location"
-msgstr "Informaþie"
-
-#: ../../printerdrake.pm_.c:482
-msgid ""
-"Every print queue (which print jobs are directed to) needs a\n"
-"name (often lp) and a spool directory associated with it. What\n"
-"name and directory should be used for this queue and how is the printer "
-"connected?"
-msgstr ""
-"Fiecare coadã (la care activitãþile de imprimare sunt trimise) are nevoie\n"
-"de un nume (adesea lp) ºi de un directoriu de spool asociat. Ce nume\n"
-"ºi directoriu doriþi sã utilizaþi pentru aceastã coadã ºi cum e "
-"conectatãimprimanta?"
-
-#: ../../printerdrake.pm_.c:489
-msgid "Name of queue"
-msgstr "Numele cozii:"
-
-#: ../../printerdrake.pm_.c:490
-msgid "Spool directory"
-msgstr "Dosar de Spool:"
-
-#: ../../printerdrake.pm_.c:491
-msgid "Printer Connection"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../raid.pm_.c:33
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nu pot adãuga partiþia la md%d _formatat_RAID"
-
-#: ../../raid.pm_.c:103
-msgid "Can't write file $file"
-msgstr "Nu pot scrie fiºierul $file"
-
-#: ../../raid.pm_.c:128
-msgid "mkraid failed"
-msgstr "mkraid a eºuat"
-
-#: ../../raid.pm_.c:128
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid a eºuat (poate vã lipsesc raidtools?)"
-
-#: ../../raid.pm_.c:144
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nu aveþi destule partiþii pentru nivelul RAID %d\n"
-
-#: ../../services.pm_.c:16
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:17
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron un orar de comandã periodicã"
-
-#: ../../services.pm_.c:18
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd e folosit pentru a monitoriza bateria ºi login-ul via syslog.\n"
-"Poate de asemenea fi folosit pentru oprirea calculatorului dacã bateria e\n"
-"slabã."
-
-#: ../../services.pm_.c:20
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Demareazã comenzi programate de comanda at la timpul specificat la\n"
-"demararea lui at ºi lanseazã comenzi batch atunci cînd media de încãrcare\n"
-"e suficient de scãzutã."
-
-#: ../../services.pm_.c:22
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron e un program UNIX standard care demareazã programe-utilizator\n"
-"specificate la intervale periodice. vixie cron adaugã o serie "
-"defuncþionalitãþi la bazicul cron UNIX, printre care o mai bunã securitate "
-"ºi\n"
-"opþiuni de configuraþie mai avansate."
-
-#: ../../services.pm_.c:25
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM adaugã suport mouse la aplicaþii text Linux ca Midnight Commander.\n"
-"El permite de asemenea operaþii cu mouse-ul de copiere/lipire ºi include\n"
-"suportul meniurilor contextuale în consolã."
-
-#: ../../services.pm_.c:28
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:30
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache e un server World Wide Web. E folosit pentru a servi fiºiere HTML\n"
-"ºi CGI."
-
-#: ../../services.pm_.c:32
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Super-procesul Internet (numit în mod normal inetd) demareazã o sumedenie\n"
-"de servicii, incluzînd telnet, ftp, rsh ºi rlogin. Dezactivarea lui telnet\n"
-"dezactiveazã toate serviciile de care e responsabil."
-
-#: ../../services.pm_.c:36
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Acest pachet încarcã harta de tastaturã selectatã ca în\n"
-"/etc/sysconfig/keyboard. Aceasta poate fi selectatã folosind kbdconfig.\n"
-"Ar trebuie sã-l lãsaþi activat pentru majoritatea calculatoarelor."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:44
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:46
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd este procesul de imprimare necesar pentru ca lpr sã funcþioneze corect.\n"
-"E un server care arbitreazã activitatea imprimantei(lor)."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) e un Server de Nume de Domeniu (DNS) care e folosit la\n"
-"rezolvarea adreselor IP."
-
-#: ../../services.pm_.c:52
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monteazã ºi demonteazã toate punctele de montaj a Fiºierelor sistem de "
-"Reþea\n"
-"(NFS), SMB (LanManager/Windows ºi NCP (NetWare)."
-
-#: ../../services.pm_.c:54
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activeazã/Dezactiveazã toate interfeþele de reþea configurate pentru fi\n"
-"iniþializate la demaraj."
-
-#: ../../services.pm_.c:56
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS e un protocol popular pentru a împãrþi fiºiere de-a lungul reþelelor\n"
-"TCP/IP. Acest serviciu furnizeazã funcþionalitatea server-ului NFS, care e\n"
-"configuratã via fiºierului /etc/exports."
-
-#: ../../services.pm_.c:59
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS e un protocol popular pentru a împãrþi fiºiere de-a lungul reþelelor\n"
-"TCP/IP. Acest serviciu furnizeazã funcþionalitatea blocãrii fiºierelor NFS."
-
-#: ../../services.pm_.c:61
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:64
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Suportul PCMCIA e destinat pentru a suporta cartele ethernet ºi modem-uri\n"
-"laptop-uri. Nu va demara decît dacã e configurat deci nu e nici o problemã\n"
-"dacã e instalat pe calculatoare care nu au nevoie de acesta."
-
-#: ../../services.pm_.c:67
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper-ul gestioneazã conexiunile RPC, care sunt folosite de "
-"protocoluri\n"
-"ca NFS ºi NIS. Server-ul portmap trebuie demarat pe calculatoare care \n"
-"funcþioneazã ca servere pentru protocoluri care folosesc mecanismul RPC."
-
-#: ../../services.pm_.c:70
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix est un Agent de Transport de Mail (MTA), care e programul care\n"
-"permite deplasarea mail-ului de la un calculator la altul."
-
-#: ../../services.pm_.c:72
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Salveazã ºi restaureazã entropia sistemului pentru o mai mare calitate\n"
-"a generãrii de numere aleatoare."
-
-#: ../../services.pm_.c:74
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Serviciul de rutaj permite actualizarea automatã a tabloului IP de rutaj\n"
-"via\n"
-" protocolului RIP. În timp de RIP este folosit pentru reþele mici,\n"
-"alte protocoluri mai complexe sunt folosite pentru reþele mai complexe."
-
-#: ../../services.pm_.c:79
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Protocolul rstat permite utilizatorilor unei reþele sã recupereze\n"
-"performanþele metrice de la orice calculator de pe reþea."
-
-#: ../../services.pm_.c:81
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"'Protocolul rusers permite utilizatorilor unei reþele sã identifice\n"
-"cine e conectat la calculatoarele care au rãspuns."
-
-#: ../../services.pm_.c:83
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Protocolul rwho permite utilizatorului sã recupereze lista tuturor\n"
-"utilizatorului conectaþi la un calculator care foloseºte procesul rwho\n"
-"(similar cu finger)."
-
-#: ../../services.pm_.c:85
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:86
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog e facilitatea pe care multe procese o folosesc pentru a scrie\n"
-"mesaje de log în numeroaselor fiºiere de log ale sistemului. E o idee\n"
-"bunã sã demaraþi întotdeauna syslog."
-
-#: ../../services.pm_.c:88
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:89
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Demareazã ºi opreºte Server-ul de caractere X la demararea ºi\n"
-"oprirea calculatorului."
-
-#: ../../services.pm_.c:118
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Alegeþi ce servici doriþi sã fie lansate automat la demaraj"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "running"
-msgstr "Avertisment"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "stopped"
-msgstr "Append"
-
-#: ../../services.pm_.c:151
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:156
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:163
-#, fuzzy
-msgid "On boot"
-msgstr "Root"
-
-#: ../../standalone/diskdrake_.c:67
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Nu pot citi tabloul de partiþii, e prea deteriorat dupã mine :(\n"
-"Voi încerca sã continui ºtergînd partiþiile greºite"
-
-#: ../../standalone/drakgw_.c:37 ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet Connection Sharing"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/drakgw_.c:118
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:119
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:123
-#, fuzzy
-msgid "disable"
-msgstr "Tabel"
-
-#: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148
-#, fuzzy
-msgid "reconfigure"
-msgstr "Configuraþi X"
-
-#: ../../standalone/drakgw_.c:126
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "Detecþia perifericelor..."
-
-#: ../../standalone/drakgw_.c:134
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/drakgw_.c:143
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:144
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:148
-#, fuzzy
-msgid "enable"
-msgstr "Tabel"
-
-#: ../../standalone/drakgw_.c:155
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:160
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/drakgw_.c:168
-msgid "Config file content could not be interpreted."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-msgid "Unrecognized config file"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:181
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:207
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:208
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Interesant"
-
-#: ../../standalone/drakgw_.c:216
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:217
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:224
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:233
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:242
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid "Potential LAN address conflict found in current config of $_!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:261 ../../standalone/drakgw_.c:267
-#, fuzzy
-msgid "Firewalling configuration detected!"
-msgstr "Citirea configuraþiei"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:276
-#, fuzzy
-msgid "Configuring..."
-msgstr "Configuraþia IDE"
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:307
-#, fuzzy
-msgid "Problems installing package $_"
-msgstr "Instalarea pachetului  %s"
-
-#: ../../standalone/drakgw_.c:590
-msgid "Congratulations!"
-msgstr "Felicitãri!"
-
-#: ../../standalone/drakgw_.c:591
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:608
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:609
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:610
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/drakgw_.c:615
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/drakgw_.c:622
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/draknet_.c:59
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuraþia reþelei"
-
-#: ../../standalone/draknet_.c:66 ../../standalone/draknet_.c:539
-#, fuzzy
-msgid "Profile: "
-msgstr "montare eºuatã: "
-
-#: ../../standalone/draknet_.c:74
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:108
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:114
-msgid "Name of the profile to create:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:140
-#, fuzzy
-msgid "Hostname: "
-msgstr "Numele calculatorului:"
-
-#: ../../standalone/draknet_.c:147
-#, fuzzy
-msgid "Internet access"
-msgstr "Interesant"
-
-#: ../../standalone/draknet_.c:160
-#, fuzzy
-msgid "Type:"
-msgstr "Tip: "
-
-#: ../../standalone/draknet_.c:163 ../../standalone/draknet_.c:354
-msgid "Gateway:"
-msgstr "Pasarelã:"
-
-#: ../../standalone/draknet_.c:163 ../../standalone/draknet_.c:354
-#, fuzzy
-msgid "Interface:"
-msgstr "Interesant"
-
-#: ../../standalone/draknet_.c:168
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:170 ../../standalone/draknet_.c:357
-#: ../../standalone/net_monitor_.c:122 ../../standalone/net_monitor_.c:224
-#, fuzzy
-msgid "Connected"
-msgstr "Nume de conexiune"
-
-#: ../../standalone/draknet_.c:170 ../../standalone/draknet_.c:357
-#: ../../standalone/net_monitor_.c:83 ../../standalone/net_monitor_.c:122
-#: ../../standalone/net_monitor_.c:224
-#, fuzzy
-msgid "Not connected"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/draknet_.c:173 ../../standalone/draknet_.c:358
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:173 ../../standalone/draknet_.c:358
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:191
-#, fuzzy
-msgid "Starting your connection..."
-msgstr "Configuraþie reþea"
-
-#: ../../standalone/draknet_.c:199
-#, fuzzy
-msgid "Closing your connection..."
-msgstr "Configuraþie reþea"
-
-#: ../../standalone/draknet_.c:204
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-
-#: ../../standalone/draknet_.c:207
-#, fuzzy
-msgid "The system is now disconnected."
-msgstr "Pe ce disc doriþi sã schimbaþi ?"
-
-#: ../../standalone/draknet_.c:219
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Configuraþia serviciilor"
-
-#: ../../standalone/draknet_.c:226 ../../standalone/draknet_.c:411
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Configuraþie"
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "Adapter"
-msgstr "Actualizare"
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "Driver"
-msgstr "Server"
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "Interface"
-msgstr "Interesant"
-
-#: ../../standalone/draknet_.c:231
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:250
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Configuraþie reþea"
-
-#: ../../standalone/draknet_.c:283
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Normal"
-
-#: ../../standalone/draknet_.c:288
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:307
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Test de configuraþie"
-
-#: ../../standalone/draknet_.c:391
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:415
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "Configuraþie"
-
-#: ../../standalone/draknet_.c:423
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:429
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:430
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:466 ../../standalone/draknet_.c:470
-#, fuzzy
-msgid "Disable"
-msgstr "Tabel"
-
-#: ../../standalone/draknet_.c:466 ../../standalone/draknet_.c:470
-#, fuzzy
-msgid "Enable"
-msgstr "Tabel"
-
-#: ../../standalone/draknet_.c:504
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:528
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/draknet_.c:532
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/draknet_.c:541
-#, fuzzy
-msgid "Connection type: "
-msgstr "Nume de conexiune"
-
-#: ../../standalone/draknet_.c:547
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-#, fuzzy
-msgid "Provider dns 1 (optional)"
-msgstr "Opþiuni imprimantã"
-
-#: ../../standalone/draknet_.c:561
-#, fuzzy
-msgid "Provider dns 2 (optional)"
-msgstr "Opþiuni imprimantã"
-
-#: ../../standalone/draknet_.c:574
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:575
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Bun venit Piraþilor"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Slab"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoiac"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Va trebui sã folosiþi acest nivel cu grijã. Aceasta face ca sistemul sã fie\n"
-"mai uºor de folosit, dar foarte sensibil: nu trebuie sã fie folosit pentru "
-"un\n"
-"calculator conectat cu altele de pe Internet. Nu existã nici o parolã de\n"
-"acces."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Parolele sunt acum activate, dar utilizarea lui ca un calculator într-o\n"
-"reþea tot nu recomandatã."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Cîteva ameliorãri pentru acest nivel de securitate, principalul fiind cã\n"
-"am introdus mai multe mesaje de avertisment ºi verificãri."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Acest a nivelul de securitate standard recomandat pentru un calculator care\n"
-"va fi conectat ca un client la Internet. Nu existã verificãri de securitate."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Cu acest nivel de securitate, utilizarea acestui calculator ca server\n"
-"devine posibilã. Securitatea este destul de ridicatã pentru a folosi acest\n"
-"sistem ca server care acceptã conexiuni de la mulþi clienþi."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Avem funcþionalitãþile nivelului 4 de securitate dar acum sistemul e\n"
-"complet închis. Securitatea e la maximum."
-
-#: ../../standalone/draksec_.c:52
-msgid "Setting security level"
-msgstr "Alegerea nivelului de securitate"
-
-#: ../../standalone/drakxconf_.c:44
-#, fuzzy
-msgid "Control Center"
-msgstr "Nume de conexiune"
-
-#: ../../standalone/drakxconf_.c:45
-msgid "Choose the tool you want to use"
-msgstr "Alegeþi unealta pe care doriþi sã o folosiþi"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:23
-#, fuzzy
-msgid "Change Cd-Rom"
-msgstr "Alegeþi o altã rezoluþie"
-
-#: ../../standalone/livedrake_.c:24
-#, fuzzy
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Schimbaþi Cd-Rom-ul!\n"
-"\n"
-"Vã rog introduceþi Cd-Rom etichetat \"%s\" ºi apoi apãsaþi Ok.\n"
-"Dacã nu-l aveþi, apãsaþi Anuleazã pentru a evita instalarea de pe acest Cd-"
-"Rom."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:50
-msgid "no serial_usb found\n"
-msgstr "n'am gãsit nici un serie_usb\n"
-
-#: ../../standalone/mousedrake_.c:54
-msgid "Emulate third button?"
-msgstr "Emulare 3 Butoane?"
-
-#: ../../standalone/mousedrake_.c:131
-#, fuzzy
-msgid "Test the mouse here."
-msgstr "Vã rog, alegeþi tipul de mouse?"
-
-#: ../../standalone/net_monitor_.c:40 ../../standalone/net_monitor_.c:52
-#, fuzzy
-msgid "Network Monitoring"
-msgstr "Configuraþia reþelei"
-
-#: ../../standalone/net_monitor_.c:56
-msgid "Statistics"
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:59
-msgid "Sending Speed: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:61
-msgid "Receiving Speed: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:66
-#, fuzzy
-msgid "Close"
-msgstr "Mouse USB"
-
-#: ../../standalone/net_monitor_.c:100 ../../standalone/net_monitor_.c:104
-#, fuzzy
-msgid "Connecting to Internet "
-msgstr "Nume de conexiune"
-
-#: ../../standalone/net_monitor_.c:100 ../../standalone/net_monitor_.c:104
-#, fuzzy
-msgid "Disconnecting from Internet "
-msgstr "Nume de conexiune"
-
-#: ../../standalone/net_monitor_.c:114
-#, fuzzy
-msgid "Disconnection from Internet failed."
-msgstr "Nume de conexiune"
-
-#: ../../standalone/net_monitor_.c:115
-#, fuzzy
-msgid "Disconnection from Internet complete."
-msgstr "Nume de conexiune"
-
-#: ../../standalone/net_monitor_.c:117
-#, fuzzy
-msgid "Connection complete."
-msgstr "Nume de conexiune"
-
-#: ../../standalone/net_monitor_.c:118
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:188
-msgid "sent: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:191
-msgid "received: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:222
-#, fuzzy
-msgid "Connect"
-msgstr "Nume de conexiune"
-
-#: ../../standalone/net_monitor_.c:222
-#, fuzzy
-msgid "Disconnect"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/tinyfirewall_.c:29
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Citirea configuraþiei"
-
-#: ../../standalone/tinyfirewall_.c:42
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Citirea configuraþiei"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:10
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Linux Mandrake machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:15
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:22
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:27
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:32
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:37
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:42
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:47
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:52
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:57
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:62
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:67
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:83
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:85
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Eroare la citirea  %s pentru a scrie: %s"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Development"
-msgstr "Programator"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "Informaþie"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Graphics"
-msgstr "Multimedia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet"
-msgstr "Interesant"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Opþiunea imprimantei NetWare"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Configuraþie proxy"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Birou"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Multimedia"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentaþie"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Sound"
-msgstr "Multimedia"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Informaþie"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Games"
-msgstr "Gnome"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Video"
-msgstr "Multimedia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Opþiunea imprimantei NetWare"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "Informaþie"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "server"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configuraþie"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "KDE Workstation"
-msgstr "Informaþie"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "Informaþie"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Interesant"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Documentaþie"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Doriþi sã testaþi configuraþia ?"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#, fuzzy
-#~ msgid "%d seconds"
-#~ msgstr "Testul se va termina în %d secunde"
-
-#, fuzzy
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "Configuraþie"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Selecþioneazã fiºierul"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Configuraþie reþea"
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "Configuraþia IDE"
-
-#, fuzzy
-#~ msgid "Standard tools"
-#~ msgstr "Programator"
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Configuraþie: Adaugã localizare"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr ""
-#~ "Acest script de demaraj încearcã sã încarce modulele pentru mouse-ul\n"
-#~ "dumneavoastrã usb."
-
-#, fuzzy
-#~ msgid "Boot style configuration"
-#~ msgstr "Configuraþie post-install"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Dependenþe automate"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Configuraþie LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Creaþi o dischetã de demaraj"
-
-#~ msgid "Format floppy"
-#~ msgstr "Formateazã dischetã"
-
-#~ msgid "Choice"
-#~ msgstr "Alegere "
-
-#, fuzzy
-#~ msgid "gMonitor"
-#~ msgstr "Monitor"
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Puteþi alege acum diferite opþiuni pentru sistemul dumneavoastrã.\n"
-#~ "\n"
-#~ "  - Foloseºte optimizãri pentru disc dur: aceastã opþiune poate ameliora\n"
-#~ "performanþele discului dur dar e rezervat numai utilizatorilor avansaþi:\n"
-#~ "problemele cu unele microprocesoare port distruge datele, deci sunteþi\n"
-#~ "avertizat. Kernel-ul conþine o listã neagrã a discurilor ºi a "
-#~ "microproce-\n"
-#~ "soarelor, dar dacã vreþi sã eliminaþi orice surprizã nu selectaþi "
-#~ "aceastã\n"
-#~ "opþiune.\n"
-#~ "\n"
-#~ "  - Alege nivelul de securitate: puteþi alege nivelul de securitate "
-#~ "pentru\n"
-#~ "sistemul dumneavoastrã. Vã referiþi-vã la manual pentru o informaþie "
-#~ "completã.\n"
-#~ "Pe scurt: dacã nu sunteþi sigur, alegeþi \"Mediu\", dacã doriþi un\n"
-#~ "calculator securizat, alegeþi \"Paranoiac\" dar aveþi grijã: ÎN ACEST "
-#~ "NIVEL\n"
-#~ " DE SECURITATE, LE LOGIN ÎN CALITATE DE ROOT NU E AUTORIZAT DIRECT! "
-#~ "Pentru \n"
-#~ "a deveni root, va trebui sã vã conectaþi ca utilizator normal ºi apoi sã\n"
-#~ "folosiþi comanda \"su\". În plus, nu vã aºteptaþi sã aveþi altceva decît\n"
-#~ "un server. Aþi fost avertizat.\n"
-#~ "\n"
-#~ "  - Precizeazã RAM-ul dacã e necesar: din pãcate, în lumea actualã a\n"
-#~ "calculatoarelor personale, nu existã o metodã standard pentru a consulta\n"
-#~ "BIOS-ul cu privire la RAM-ul prezent în calculator dumneavoastrã. Din\n"
-#~ "aceastã cauzã, Linux poate eºua la detectarea RAM-ului în mod corect. "
-#~ "Dacã\n"
-#~ "acesta e cazul, puteþi specifica aici cantitatea exactã. Notaþi cã o\n"
-#~ "diferenþã de 2 sau 4Mb e normalã.\n"
-#~ "\n"
-#~ "  - Auto-montaj des media extractibile: dacã preferaþi sã nu montaþi "
-#~ "manual\n"
-#~ "în mod manual aceste periferice (CD-ROM, Floppy, Zip) cu ajutorul \n"
-#~ "comenzilor \"mount\" ºi \"umount\", selectaþi aceastã opþiune.\n"
-#~ "\n"
-#~ "  - Activeazã Numlock la demaraj: dacã doriþi sã activaþi NumLock la\n"
-#~ "demaraj selectaþi aceastã opþiune (Notaþi cã Numlock poate sau sã\n"
-#~ "funcþioneze în) mod grafic, X)."
-
-#, fuzzy
-#~ msgid "Internet/Network access"
-#~ msgstr "Interesant"
-
-#, fuzzy
-#~ msgid "Mail information"
-#~ msgstr "Afiºeazã informaþiile"
-
-#, fuzzy
-#~ msgid "Firewall Configuration Wizard"
-#~ msgstr "Configuraþia reþelei"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Diverse"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Întrebãri diverse"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Nu pot sã folosesc supermount în nivelul de securitate ridicat"
-
-#, fuzzy
-#~ msgid "Actions"
-#~ msgstr "Informaþie"
-
-#, fuzzy
-#~ msgid "toot"
-#~ msgstr "Root"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Primul server DNS"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Al doilea server DNS"
-
-#, fuzzy
-#~ msgid "using module"
-#~ msgstr "Nume de domeniu"
-
-#, fuzzy
-#~ msgid "Development, Database"
-#~ msgstr "Programator"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "None"
-#~ msgstr "Nici unul"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Ce gestionar de demaraj doriþi sã folosiþi ?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Floppy pentru instalare automatã"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Sã caut un modem?"
-
-#, fuzzy
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "Configuraþie reþea"
-
-#, fuzzy
-#~ msgid "Configure a cable connection"
-#~ msgstr "Configuraþie reþea"
-
-#, fuzzy
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Configuraþie reþea"
-
-#, fuzzy
-#~ msgid "Configure local network"
-#~ msgstr "Configuraþie reþea"
-
-#, fuzzy
-#~ msgid "Disable networking"
-#~ msgstr "Configuraþie reþea"
-
-#, fuzzy
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr "Reþeaua LAN a fost deja configuratã. Doriþi sã :"
-
-#, fuzzy
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Configuraþia IDE"
-
-#~ msgid "Multimedia"
-#~ msgstr "Multimedia"
-
-#, fuzzy
-#~ msgid "KDE"
-#~ msgstr "IDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#, fuzzy
-#~ msgid "Internet Tools"
-#~ msgstr "Configuraþie proxy"
-
-#, fuzzy
-#~ msgid "Development C/C++"
-#~ msgstr "Programator"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Configuraþia zonei orare"
-
-#~ msgid "Configure printer"
-#~ msgstr "Configuraþia imprimantei"
-
-#, fuzzy
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Opþiunea imprimantei NetWare"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(poate cauza deteriorarea datelor)"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "Sa folosesc optimizãrile penrtu disc dur?"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Activeazã num lock la demaraj"
-
-#, fuzzy
-#~ msgid "Confirm Password"
-#~ msgstr "Parola"
-
-#~ msgid "DNS server:"
-#~ msgstr "Server DNS:"
-
-#~ msgid "Gateway device:"
-#~ msgstr "Periferic pasarelã:"
-
-#~ msgid "default"
-#~ msgstr "standard"
-
-#, fuzzy
-#~ msgid "What is your system used for?"
-#~ msgstr "Care e folosinþa sistemului dumneavoastrã?"
-
-#, fuzzy
-#~ msgid "Select the size you want to install"
-#~ msgstr "Alegeþi mãrimea pe care vreþi sã o instalaþi"
-
-#~ msgid "Customized"
-#~ msgstr "Personalizat"
-
-#, fuzzy
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Sunteþi sigur ca sunteþi un expert?\n"
-#~ "Ei, nu-i glumã, veþi putea face lucruri serioase dar periculoase aici."
-
-#~ msgid "Use shadow file"
-#~ msgstr "Foloseºte un fiºier shadow"
-
-#~ msgid "shadow"
-#~ msgstr "shadow"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Foloseºte parole MD5"
-
-#~ msgid "Search"
-#~ msgstr "Cautã"
-
-#~ msgid "Package"
-#~ msgstr "Pachet"
-
-#~ msgid "Text"
-#~ msgstr "Text"
-
-#~ msgid "Tree"
-#~ msgstr "Arbore"
-
-#~ msgid "Sort by"
-#~ msgstr "Triazã în funcþie de"
-
-#~ msgid "Category"
-#~ msgstr "Categorie"
-
-#~ msgid "See"
-#~ msgstr "Afiºeazã"
-
-#~ msgid "Installed packages"
-#~ msgstr "Pachete instalate"
-
-#~ msgid "Available packages"
-#~ msgstr "Pachete disponibile"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Afiºaþi numai foile"
-
-#~ msgid "Expand all"
-#~ msgstr "Expandeazã tot"
-
-#~ msgid "Collapse all"
-#~ msgstr "Reduce tot"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Adaugã localizarea pachetelor"
-
-#~ msgid "Update location"
-#~ msgstr "Actualizare localizare"
-
-#~ msgid "Remove"
-#~ msgstr "ªterge"
-
-#~ msgid "Find Package"
-#~ msgstr "Cautã Pachetul"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Cautã pachetul conþinînd fiºierul"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Basculeazã între Instalare ºi Disponibil"
-
-#~ msgid "Uninstall"
-#~ msgstr "Dezinstalare"
-
-#~ msgid "Choose package to install"
-#~ msgstr "Alegeþi pachetul de instalat"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Verificare dependenþe"
-
-#~ msgid "Wait"
-#~ msgstr "Aºteptare"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Pachetele urmãtoare urmeazã sã fie dezinstalate"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "Dezinstalarea RPM-urilor"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Ce pachet cãutaþi ?"
-
-#~ msgid "%s not found"
-#~ msgstr "n'am gãsit %s "
-
-#~ msgid "No match"
-#~ msgstr "Nici unul"
-
-#~ msgid "No more match"
-#~ msgstr "Nici o altã ocurenþã"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake e actualmente într-un mod ``memorie joasã''.\n"
-#~ "Voi re-lansa rpmdrake pentru a permite cãutarea fiºierelor"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Ce fiºier cãutaþi ?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Ce cãutaþi ?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Daþi-mi un nume (ex: `extra', `comercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Directoriu"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Nici un Cd-rom disponibil (nimic în /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL-ul directoriului care conþine RPM-urile"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Pentru FTP ºi HTTP, aveþi nevoie sã daþi localizarea pentru hdlist\n"
-#~ "Aceasta trebuie sã fie relativã la URL -ul de mai sus"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Vã rog furnizaþi urmãtoarea informaþie"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s e deja folosit"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Actualizare bazei RPM-urilor"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Voi ºterge intrarea %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Cãutare de foi"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Gãsirea foilor ia ceva timp"
-
-#, fuzzy
-#~ msgid "France"
-#~ msgstr "Anuleazã"
-
-#, fuzzy
-#~ msgid "ECI modem"
-#~ msgstr "Expert"
-
-#~ msgid "mandatory"
-#~ msgstr "indispensabil"
-
-#~ msgid "interesting"
-#~ msgstr "Interesant"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (important)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (foarte simpatic)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (simpatic)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "La ce port serial este conectat mouse-ul?"
-
-#~ msgid "Czech"
-#~ msgstr "Ceh"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovac"
-
-#, fuzzy
-#~ msgid "Reconfigure local network"
-#~ msgstr "Reconfiguraþi reþeaua"
-
-#, fuzzy
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid "Germany"
-#~ msgstr "German"
-
-#, fuzzy
-#~ msgid "Germany (1TR6)"
-#~ msgstr "German"
-
-#, fuzzy
-#~ msgid "What do you wish to do?"
-#~ msgstr "Ce doriþi sã faceþi ?"
-
-#, fuzzy
-#~ msgid "Install/Rescue"
-#~ msgstr "Instalare"
-
-#, fuzzy
-#~ msgid "Rescue"
-#~ msgstr "Redimensioneazã"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Ce tip de partiþie doriþi?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Linux-Mandrake "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Alegeþi \"Instalare\" dacã nu exista alte versiuni de Linux instalate,\n"
-#~ "sau dacã doriþi sã folosiþi mai multe versiuni sau distribuþii.\n"
-#~ "\n"
-#~ "Alegeþi \"Actualizare\" dacã doriþi sã actualizaþi o versiune\n"
-#~ "precedentã Mandrake Linux:\n"
-#~ "%s or %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Selectare:\n"
-#~ "\n"
-#~ "  - Automatizat: Dacã n'aþi mai instalat Linux niciodatã, alegeþi "
-#~ "aceasta.\n"
-#~ "NOTÃ:\n"
-#~ "    reþeaua nu va fi configuratã în timpul instalãrii, folosiþi\n"
-#~ "    \"LinuxConf\" pentru a o configura dupã ce instalarea s'a terminat.\n"
-#~ "\n"
-#~ "  - Personalizat: Dacã sunteþi destul de familiar cu GNU/Linux, puteþi\n"
-#~ "    atunci sã alegeþi utilizarea principalã a calculatorului. Vezi mai "
-#~ "jos\n"
-#~ "    pentru detalii.\n"
-#~ "\n"
-#~ "  - Expert: Aceasta presupune cã sunteþi foarte familiar cu  GNU/Linux "
-#~ "ºi\n"
-#~ "    doriþi sã faceþi o instalare foarte personalizatã. Ca ºi pentru "
-#~ "clasa\n"
-#~ "    \"Personalizat\", veþi putea sã selectaþi utilizarea sistemului\n"
-#~ "    dumneavoastrã.\n"
-#~ "    Dar vã rog, NU ALEGEÞi ACEASTA DECÎT DACÃ ªTIÞI CE FACEÞI!.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Linux-Mandrake system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "În acest punct, veþi putea alege partiþiile pentru a instala sistemul\n"
-#~ "Linux-Mandrake dacã acestea au fost deja definite (dintr-o altã "
-#~ "instalare\n"
-#~ "prealabilã a unui sistem Linux sau cu ajutorul unui program "
-#~ "departiþionare). În celelalte cazuri, partiþiile vor trebui sã fie "
-#~ "create.\n"
-#~ "Aceastã operaþie consistã în divizarea logicã a capacitãþii discului dur\n"
-#~ "în arii separate pentru utilizare.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dacã aveþi nevoie sã creaþi noi partiþii, folosiþi \"Auto alocare\" \n"
-#~ "pentru o creare automatã de partiþii Linux. Puteþi selecta discul pentru\n"
-#~ "partiþionare fãcînd clic pe \"hda\" pentru primul disc IDE, \"hdb\" \n"
-#~ "pentru al doilea sau \"sda\" pentru primul disc SCSI ºi aºa mai departe.\n"
-#~ "\n"
-#~ "\n"
-#~ "Douã partiþii obiºnuite sunt: partiþia root (/), punctul de plecare\n"
-#~ "al ierarhiei sistemului de fiºiere ºi /boot, care conþine toate "
-#~ "fiºierele\n"
-#~ "necesare pentru a demara sistemul de operare cînd calculatorul e aprins.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pentru cã efectele acestui proces sunt în mod uzual reversibile,\n"
-#~ "partiþionarea poate fi intimidantã pentru un utilizator ne-experimentat.\n"
-#~ "De aceea DiskDrake simplificã pe cît posibil acest proces. Consultaþi\n"
-#~ "documentaþia ºi nu vã grãbiþi înainte de a începe.\n"
-#~ "\n"
-#~ "\n"
-#~ "Puteþi accede la toate opþiunile cu ajutorul tastaturii: navigaþi "
-#~ "printre\n"
-#~ "partiþii folosind tasta Tab ºi tastele sãgeþi Sus/Jos. Cînd o partiþie\n"
-#~ "e selectatã, puteþi folosi:\n"
-#~ "\n"
-#~ "- Ctrl-c  pentru a crea o nouã partiþie (cînd a partiþie goalã e "
-#~ "selectatã)\n"
-#~ "\n"
-#~ "- Ctrl-d  pentru a ºterge o partiþie\n"
-#~ "\n"
-#~ "- Ctrl-m pentru a crea un punct de montaj\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Toate partiþiile care tocmai au fost definite trebuie sã fie formatate\n"
-#~ "înainte de a fi utilizate. (formatare însemnînd crearea fiºierelor "
-#~ "sistem).\n"
-#~ "Poate doriþi sã reformataþi partiþii pre-existente pentru a ºterge \n"
-#~ "informaþiile conþinute.\n"
-#~ "Nota: nu este necesar sã formataþi partiþii mai ales dacã doriþi sã\n"
-#~ "conservaþi informaþiile ce le conþin. Partiþii de acest gen sunt:\n"
-#~ "/home ºi /usr/local."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Pachetele selectate sunt acum pe cale de fi instalate. Aceastã operaþie\n"
-#~ "ar trebui sã ia cîteva minute, excepþie fãcînd Actualizare unei "
-#~ "distribuþii\n"
-#~ "precedente, caz în care timpul va fi lung înainte ca actualizarea sã\n"
-#~ "înceapã."
-
-#, fuzzy
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Dacã DrakX nu a reuºit sã detecteze mouse-ul, sau dacã doriþi sã "
-#~ "verificaþi\n"
-#~ "ceea ce a fãcut, vi se va propune lista cu mouse-uri de mai sus.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dacã sunteþi de acord cu propunerea lui DrakX, sãriþi la secþiunea "
-#~ "doritã\n"
-#~ "cu un simple în meniu din stînga. Dacã nu, alegeþi tipul de mouse care\n"
-#~ "credeþi cã se apropie mai mult de cel pe care-l aveþi.\n"
-#~ "\n"
-#~ "\n"
-#~ "În cazul unui mouse de tip serie, veþi putea specifica portul serie la\n"
-#~ "care e conectat."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Linux-Mandrake system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Aceastã secþiune este dedicatã configuraþiei unei reþele locale (LAN)\n"
-#~ "sau a unui modem.\n"
-#~ "\n"
-#~ "Alegeþi \"Reþea LAN\" ºi DrakX va încerca sã detecteze adaptatorul\n"
-#~ "Ethernet pe care-l aveþi. Adaptatorii PCI sunt în general detectaþi ºi\n"
-#~ "iniþializaþi în mod automat.\n"
-#~ "În cazul unui adaptator ISA, detecþia automatã nu va funcþiona ºi veþi\n"
-#~ "avea atunci de ales pilotul din lista propusã.\n"
-#~ "\n"
-#~ "\n"
-#~ "La fel ºi pentru adaptatorii SCSI, puteþi lãsa testul mai întîi, dacã nu\n"
-#~ "puteþi specifica opþiunile pentru pilot pe care le-aþi recuperat în \n"
-#~ "documentaþia hardware-ului.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dacã instalaþi sistemul Linux-Mandrake pe un calculator care face parte\n"
-#~ "dintr-o reþea deja existentã, administratorul de reþea vã va da toate\n"
-#~ "informaþiile necesare (adresã IP, sub-mascã de reþea sau netmask mai pe\n"
-#~ "scurt ºi numele calculatorului). Dacã configuraþi o reþea privatã la\n"
-#~ "dumneavoastrã acasã, de exemplu, va trebui sã alegeþi adresele singur.\n"
-#~ "\n"
-#~ "\n"
-#~ "Alegeþi \"Telefonaþi cu modem\" ºi atunci conexiunea Internet va fi\n"
-#~ "configuratã. DrakX va încerca sã detecteze modemul ºi dacã nu reuºeºte\n"
-#~ "vã va propune portul serie la care modemul e conectat."
-
-#, fuzzy
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "Linux poate gera multe tipuri de imprimante. Fiecare din aceste tipuri\n"
-#~ "necesitã o instalare diferitã. Notaþi cã \"spool\"-ul de imprimantã\n"
-#~ "foloseºte \"lp\" pentru numele din oficiu al imprimantei; deci va trebui\n"
-#~ "sã aveþi o imprimantã cu un acest nume; dar îi veþi putea da mai multe "
-#~ "nume,\n"
-#~ "separate de caractere '|'. Deci, dacã doriþi sã aveþi unele nume mai "
-#~ "pline\n"
-#~ "de sens, veþi putea folosi, de exemplu: \"Imprimanta mea|lp\".\n"
-#~ "Imprimanta care are are \"lp\" printre numele ei va fi consideratã ca\n"
-#~ "imprimanta din oficiu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dacã imprimanta e conectatã fizic la calculator, selectaþi atunci\n"
-#~ "\"Imprimantã localã\". Veþi avea apoi a intra numele portului de\n"
-#~ "imprimantã la care aceasta e conectatã ºi a selecta filtrul apropriat\n"
-#~ "Portul LPT1 devine lp0 în Linux\n"
-#~ "\n"
-#~ "\n"
-#~ "Dacã doriþi sã accedeþi la un calculator Unix distant, veþi avea a "
-#~ "selecta\n"
-#~ "\"lpd distant\". Pentru a o face sã funcþioneze, nu aveþi nevoie de "
-#~ "parolã\n"
-#~ "sau de nume de utilizator, dar va trebui sã ºtiþi care e numele cozii de\n"
-#~ "imprimare de pe acest server-ului.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dacã doriþi sã acedeþi la o imprimantã SMB (adicã la o imprimantã "
-#~ "conectatã\n"
-#~ "fizic la un calculator distant cu un sistem Windows), va trebui sã \n"
-#~ "specificaþi numele ei SMB (care nu e numele ei TCP/IP) ºi probabil "
-#~ "adresa\n"
-#~ "ei IP, plus numele utilizatorului, al grupului de lucru ºi parola cerutã\n"
-#~ "pentru a accede la imprimantã ºi bineînþeles numele imprimantei. "
-#~ "Lucrurile\n"
-#~ "sunt similare pentru o imprimantã Netware, excepþie fãcînd faptul cã nu\n"
-#~ "aveþi nevoie de informaþia de grup de lucru."
-
-#, fuzzy
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "E foarte indicat sã rãspundeþi \"Da\" aici. Dacã instalaþi Microsoft \n"
-#~ "Windows mai tîrziu, acest a vã va ºterge sectorul de demaraj al "
-#~ "discului.\n"
-#~ "Dacã nu aveþi un floppy de demaraj, nu veþi mai putea demara Linux."
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Abandonaþi schimbãrile?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Ce tip de mouse aveþi?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Rezoluþii alese în mod automat"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Pentru a afla rezoluþiile disponibile voi încerca altele diferite.\n"
-#~ "Ecranul dumneavoastrã se va stinge ºi aprinde de cîteva ori..."
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Pot sã încerc sã gãsesc rezoluþiile disponibile (eg:800x600).\n"
-#~ "Uneori, totuºi, aceasta poate bloca calculatorul.\n"
-#~ "Doriþi sã încerc ?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "N'am gãsit moduri valide\n"
-#~ "Încercaþi cu o altã carte video sau alt monitor"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Configurarea automatã a rezoluþiilor"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Mouse Apple ADB"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Mouse Apple ADB (2 Butoane)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Mouse Apple ADB (3+ Butoane)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Mouse Apple USB"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Mouse Apple USB (2 Butoane)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Mouse Apple USB (3+ Butoane)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "Mouse ATI Bus"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Mouse Microsoft Bus"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Mouse Logitech Bus"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "Mouse USB (3 butoane sau mai multe)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A sau mai mult (serie)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (serie)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (serie)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (serie)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Mouse serie generic"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Mouse Microsoft compatibil (serie)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Mouse serie generic cu 3 butoane"
-
-#, fuzzy
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "montarea nfs a eºuat"
-
-#~ msgid "CHAP"
-#~ msgstr "CHAP"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Criptografie"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Doriþi sa configuraþi reþeaua LAN pentru sistemul dumneavoastrã?"
-
-#~ msgid "Show less"
-#~ msgstr "Afiºaþi mai puþin"
-
-#~ msgid "Show more"
-#~ msgstr "Afiºaþi mai mult"
-
-#~ msgid "tie"
-#~ msgstr "cravatã"
-
-#~ msgid "brunette"
-#~ msgstr "brunetã"
-
-#~ msgid "girl"
-#~ msgstr "fatã"
-
-#~ msgid "woman-blond"
-#~ msgstr "femeie blondã"
-
-#~ msgid "automagic"
-#~ msgstr "automagic"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Care e dispoziþia tastaturii?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Sã încerc sã gãsesc cartelele PCMCIA?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Sã încerc sã gãsesc periferice %s?"
-
-#~ msgid "Modem Configuration"
-#~ msgstr "Configuraþie modem"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "Doriþi sa configuraþi o conexiune telefonicã prin modem?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Sã încerc sã gãsesc periferice PCI?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "În cãutarea partiþiei root"
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: Aceasta nu e o partiþie root, vã rog alegeþi o alta"
-
-#~ msgid "No root partition found"
-#~ msgstr "N'am gãsit nici o partiþie root"
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "Vã rog alegeþi o partiþie pentru a o folosi ca partiþie root?."
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Nu aveþi destul spaþiu pentru Lnx4win"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# When possible cp437 accentuated letters can be used too.
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Bun venit la gestionarul de sisteme de operare LILO!\n"
-#~ "Pentru a lista posibilitatile, apasati <TAB>.\n"
-#~ "\n"
-#~ "Pentru a lansa unul dintre ele, scrietii numele si apasati <ENTER> sau\n"
-#~ "asteptati %d secunde pentru demararea din oficiu.\n"
-#~ "\n"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Bun venit la gestionarul de sisteme de operare SILO!\n"
-#~ "\n"
-#~ "Pentru a afisa diferitele posibilitati, apasati <TAB>.\n"
-#~ "\n"
-#~ "Pentru a demara unul dintre ele, scrieti-i numele si apasati <ENTER> sau\n"
-#~ "asteptati %d secunde pentru demararea din oficiu.\n"
-#~ "\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "Opþinunile principale ale lui SILO"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Iatã urmãtoarele intrãri din SILO.\n"
-#~ "Puteþi adãuga mai multe sau schimba cele existente."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Aceastã etichetã e deja utilizatã"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "Instalarea lui SILO a eºuat. Urmãtoarea eroare a apãrut:"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX va încerca mai întîi sã caute unul sau mai mulþi adaptatori PCI\n"
-#~ "sau SCSI. Dacã cãutarea e fructuoasã ºi ºtie ce pilot sã foloseascã,\n"
-#~ "atunci îl (le) va instala în mod automat.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dacã adaptatorul este o carte ISA, sau est e o carte PCI ºi DrakX\n"
-#~ "nu ºtie ce pilot sã foloseascã sau dacã nu aveþi nici un adaptator SCSI\n"
-#~ "veþi fi mai apoi întrebat dacã aveþi unul sau nu. Dacã nu aveþi nici "
-#~ "unul\n"
-#~ "rãspundeþi \"Nu\". Dacã aveþi unul sau mai multe, rãspundeti \"Da\".\n"
-#~ "O listã cu piloþi va va permite atunci sã alegeþi unul.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dupã ce aþi selecþionat pilotul, DrakX vã va întreba dacã doriþi\n"
-#~ "sã specificaþi opþiuni pentru el (ei). Mai întîi încercaþi ºi lãsaþi\n"
-#~ "pilotul sã testeze hardware-ul: în mod normal aceasta funcþioneazã bine.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dacã nu, nu uitaþi informaþiile despre hardware pe care le-aþi putea "
-#~ "gãsi\n"
-#~ "în documentaþia dumneavoastrã sau din Windows (dacã l-aveþi instalat), "
-#~ "aºa\n"
-#~ "cum e sugerat în ghidul de instalare. Acestea sunt opþiuni pe care le "
-#~ "veþi\n"
-#~ "furniza pilotului."
-
-#~ msgid "Shutting down"
-#~ msgstr "Oprire"
-
-#~ msgid "useless"
-#~ msgstr "nefolositor"
-
-#~ msgid "garbage"
-#~ msgstr "gunoi"
-
-#~ msgid ""
-#~ "Some true type fonts from windows have been found on your computer.\n"
-#~ "Do you want to use them? Be sure you have the right to use them under "
-#~ "Linux."
-#~ msgstr ""
-#~ "Am gãsit ceva caractere din windows.\n"
-#~ "Doriþi sã le folosiþi ? Asiguraþi-vã ca aveþi dreptul sã le folosiþi\n"
-#~ "în Linux."
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Alegeþi \"Instalare\" dacã nu exista alte versiuni de Linux instalate,\n"
-#~ "sau dacã doriþi sã folosiþi mai multe versiuni sau distribuþii.\n"
-#~ "\n"
-#~ "\n"
-#~ "Alegeþi \"Actualizare\" dacã doriþi sã actualizaþi o versiune precedentã\n"
-#~ "Mandrake Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus),\n"
-#~ "6.1 (Helios), Gold 2000 or 7.0 (Air)."
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "Doriþi sã utilizaþi LILO?"
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "Alegeþi alt CD de instalat"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Automated: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Selecþioneazã:\n"
-#~ "\n"
-#~ "  - Automatizat: Dacã nu aþi mai instalat niciodatã Linux, sau dacã "
-#~ "doriþi\n"
-#~ "sã instalaþi distribuþia aleasã \"Produsul anului\" în anul 1999, faceþi\n"
-#~ "clic aici.\n"
-#~ "\n"
-#~ "  - Personalizat: Dacã sunteþi obiºnuit cu Linux ºi veþi fi capabil sã\n"
-#~ "alegeþi scopul sistemului instalat între normal, progamator sau server.\n"
-#~ "Alegeþi \"Normal\" pentru o utilizare generalã a calculatorului. Puteþi\n"
-#~ "alege \"Programator\" dacã veþi folosi calculatorul în principal pentru\n"
-#~ "programare sau \"Server\" dacã doriþi sã instalaþi un server general\n"
-#~ "(pentru mail, imprimare...)\n"
-#~ "\n"
-#~ "  - Expert: Dacã cunoaºteþi bine GNU/Linux ºi doriþi sã alegeþi un tip "
-#~ "de\n"
-#~ "instalare personalizabilã in cele mai mici detalii, selectaþi acest tip.\n"
-#~ "Veþi fi capabil sã selectaþi destinaþia sistemului dumneavoastrã ca ºi\n"
-#~ "pentru \"Personalizat\"."
-
-#~ msgid "Setup SCSI"
-#~ msgstr "Instalare SCSI"
-
-#~ msgid "expert"
-#~ msgstr "expert"
-
-#~ msgid "developer"
-#~ msgstr "programator"
-
-#~ msgid "beginner"
-#~ msgstr "începãtor"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Dupã %s partiþie %s,"
-
-#~ msgid "changing type of"
-#~ msgstr "schimbã tipul de"
-
-#~ msgid "formatting"
-#~ msgstr "formatare"
-
-#~ msgid "resizing"
-#~ msgstr "redimensioneazã"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Cantitatea: %s MB"
-
-#~ msgid "Password:"
-#~ msgstr "Parola:"
-
-#~ msgid "User name:"
-#~ msgstr "Numele utilizatorului:"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "Alegeþi Instalare sau Actualizare"
diff --git a/perl-install/share/po/ru.po b/perl-install/share/po/ru.po
deleted file mode 100644
index 20378308f..000000000
--- a/perl-install/share/po/ru.po
+++ /dev/null
@@ -1,10178 +0,0 @@
-# DrakX messages translations.
-# Copyright (C) 1999 MandrakeSoft.
-# Vladimir Choundalov <choundalovvv@point.pwp.ru>, 2001
-# Aleksey Smirnov <smi@logic.ru>, 1999-2000
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2000-11-23 10:07 +0200\n"
-"Last-Translator: Vladimir Choundalov <choundalovvv@point.pwp.ru>\n"
-"Language-Team: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=koi8-r\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "îÁÓÔÒÏÉÔØ ×ÓÅ ÇÏÌÏ×ËÉ ÎÅÚÁ×ÉÓÉÍÏ"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "éÓÐÏÌØÚÏ×ÁÔØ ÒÁÓÛÉÒÅÎÉÅ Xinerama"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "óËÒÏÎÆÉÇÕÒÉÒÏ×ÁÔØ ÔÏÌØËÏ ËÁÒÔÕ \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÄÌÑ ÎÅÓËÏÌØËÉÈ ÇÏÌÏ×ÏË"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"÷ÁÛÁ ÓÉÓÔÅÍÁ ÐÏÄÄÅÒÖÉ×ÁÅÔ ÎÁÓÔÒÏÊËÕ ÄÌÑ ÎÅÓËÏÌØËÉÈ ÇÏÌÏ×ÏË.\n"
-"þÔÏ ×Ù ÈÏÔÉÔÅ ÓÄÅÌÁÔØ?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "÷ÉÄÅÏËÁÒÔÁ"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "÷ÙÂÅÒÉÔÅ ×ÉÄÅÏËÁÒÔÕ"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "÷ÙÂÅÒÉÔÅ X ÓÅÒ×ÅÒ"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X ÓÅÒ×ÅÒ"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree86 %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "ëÁËÕÀ ËÏÎÆÉÇÕÒÁÃÉÀ XFree ×Ù ÈÏÔÉÔÅ ÐÏÌÕÞÉÔØ?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"÷ÁÛÁ ×ÉÄÅÏËÁÒÔÁ ÍÏÖÅÔ ÐÏÄÄÅÒÖÉ×ÁÔØ ÁÐÐÁÒÁÔÎÏÅ 3D ÕÓËÏÒÅÎÉÅ, ÎÏ ÔÏÌØËÏ Ó "
-"XFree %s.\n"
-"÷ÁÛÁ ×ÉÄÅÏËÁÒÔÁ ÐÏÄÄÅÒÖÉ×ÁÅÔÓÑ ÓÅÒ×ÅÒÏÍ XFree %s, ËÏÔÏÒÙÊ ×ÏÚÍÏÖÎÏ ÌÕÞÛÅ "
-"ÐÏÄÄÅÒÖÉ×ÁÅÔ 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "÷ÁÛÁ ×ÉÄÅÏËÁÒÔÁ ÍÏÖÅÔ ÐÏÄÄÅÒÖÉ×ÁÔØ ÁÐÐÁÒÁÔÎÏÅ 3D ÕÓËÏÒÅÎÉÅ × XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s Ó ÁÐÐÁÒÁÔÎÙÍ 3D ÕÓËÏÒÅÎÉÅÍ"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"÷ÁÛÁ ×ÉÄÅÏËÁÒÔÁ ÍÏÖÅÔ ÐÏÄÄÅÒÖÉ×ÁÔØ ÁÐÐÁÒÁÔÎÏÅ 3D ÕÓËÏÒÅÎÉÅ × XFree %s,\n"
-"ïâòáôéôå ÷îéíáîéå - üôï üëóðåòéíåîôáìøîáñ ðïääåòöëá é ÷ïúíïöîï úá÷éóáîéå "
-"÷áûåçï ëïíðøàôåòá."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s Ó üëóðåòéíåîôáìøîùí ÁÐÐÁÒÁÔÎÙÍ 3D ÕÓËÏÒÅÎÉÅÍ"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"÷ÁÛÁ ×ÉÄÅÏËÁÒÔÁ ÍÏÖÅÔ ÐÏÄÄÅÒÖÉ×ÁÔØ ÁÐÐÁÒÁÔÎÏÅ 3D ÕÓËÏÒÅÎÉÅ, ÎÏ ÔÏÌØËÏ × "
-"XFree %s,\n"
-"ïâòáôéôå ÷îéíáîéå - üôï üëóðåòéíåîôáìøîáñ ðïääåòöëá é ÷ïúíïöîï úá÷éóáîéå "
-"÷áûåçï ëïíðøàôåòá.\n"
-"÷ÁÛÁ ×ÉÄÅÏËÁÒÔÁ ÐÏÄÄÅÒÖÉ×ÁÅÔÓÑ ÓÅÒ×ÅÒÏÍ XFree %s, ËÏÔÏÒÏÊ, ×ÏÚÍÏÖÎÏ, ÌÕÞÛÅ "
-"ÐÏÄÄÅÒÖÉ×ÁÅÔ 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "îÁÓÔÒÏÊËÁ XFree"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "÷ÙÂÅÒÉÔÅ ÒÁÚÍÅÒ ÐÁÍÑÔÉ ×ÁÛÅÊ ×ÉÄÅÏËÁÒÔÙ"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "÷ÙÂÅÒÉÔÅ ÏÐÃÉÉ ÄÌÑ ÓÅÒ×ÅÒÁ"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "÷ÙÂÅÒÉÔÅ ÍÏÎÉÔÏÒ"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "íÏÎÉÔÏÒ"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"ä×Á ËÒÉÔÉÞÅÓËÉÈ ÐÁÒÁÍÅÔÒÁ - ÜÔÏ ÞÁÓÔÏÔÁ ×ÅÒÔÉËÁÌØÎÏÊ ÒÁÚ×ÅÒÔËÉ, ËÏÔÏÒÁÑ "
-"ÓÕÔØ\n"
-"ÞÁÓÔÏÔÁ ÏÂÎÏ×ÌÅÎÉÑ ×ÓÅÇÏ ÜËÒÁÎÁ, É ÞÔÏ ÅÝÅ ×ÁÖÎÅÅ, ÞÁÓÔÏÔÁ ÇÏÒÉÚÏÎÔÁÌØÎÏÊ\n"
-"ÒÁÚ×ÅÒÔËÉ, ËÏÔÏÒÁÑ ÓÕÔØ ÞÁÓÔÏÔÁ ×Ù×ÏÄÁ ÓÔÒÏË ÎÁ ÜËÒÁÎ.\n"
-"\n"
-"üÔÏ ïþåîø ÷áöîï, ÞÔÏÂÙ × ×ÙÂÒÁÎÎÏÍ ÍÏÎÉÔÏÒÅ ÞÁÓÔÏÔÁ ÓÉÎÈÒÏÎÉÚÁÃÉÉ ÎÅ "
-"ÏËÁÚÁÌÁÓØ\n"
-"×ÎÅ ÆÁËÔÉÞÅÓËÉÈ ×ÏÚÍÏÖÎÏÓÔÅÊ ×ÁÛÅÇÏ ÍÏÎÉÔÏÒÁ: ×Ù ÍÏÖÅÔÅ ÉÓÐÏÒÔÉÔØ ÍÏÎÉÔÏÒ.\n"
-" åÓÌÉ ÓÏÍÎÅ×ÁÅÔÅÓØ - ÌÕÞÛÅ ×ÙÂÅÒÉÔÅ ËÏÎÓÅÒ×ÁÔÉ×ÎÙÅ ÕÓÔÁÎÏ×ËÉ."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "þÁÓÔÏÔÁ ÇÏÒÉÚÏÎÔÁÌØÎÏÊ ÒÁÚ×ÅÒÔËÉ"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "þÁÓÔÏÔÁ ×ÅÒÔÉËÁÌØÎÏÊ ÒÁÚ×ÅÒÔËÉ"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "íÏÎÉÔÏÒ ÎÅ ÎÁÓÔÒÏÅÎ"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "÷ÉÄÅÏËÁÒÔÁ ÅÝÅ ÎÅ ÎÁÓÔÒÏÅÎÁ"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "òÁÚÒÅÛÅÎÉÅ ÅÝÅ ÎÅ ×ÙÂÒÁÎÏ"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "èÏÔÉÔÅ ÐÒÏÔÅÓÔÉÒÏ×ÁÔØ ÎÁÓÔÒÏÊËÉ?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"ðÒÅÄÕÐÒÅÖÄÅÎÉÅ: ÔÅÓÔÉÒÏ×ÁÎÉÅ ÜÔÏÊ ×ÉÄÅÏËÁÒÔÙ ÍÏÖÅÔ ÐÒÉ×ÅÓÔÉ Ë ÚÁ×ÉÓÁÎÉÀ "
-"ËÏÍÐØÀÔÅÒÁ"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "ðÒÏ×ÅÒËÁ ÎÁÓÔÒÏÅË"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"ÐÏÐÒÏÂÕÊÔÅ ÉÚÍÅÎÉÔØ ÎÅËÏÔÏÒÙÅ ÐÁÒÁÍÅÔÒÙ"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "ðÒÏÉÚÏÛÌÁ ÏÛÉÂËÁ:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "úÁ×ÅÒÛÅÎÉÅ ÞÅÒÅÚ %d ÓÅËÕÎÄ"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "üÔÉ ÕÓÔÁÎÏ×ËÉ ×ÅÒÎÙ?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "ðÒÏÉÚÏÛÌÁ ÏÛÉÂËÁ, ÐÏÐÒÏÂÕÊÔÅ ÉÚÍÅÎÉÔØ ÎÅËÏÔÏÒÙÅ ÐÁÒÁÍÅÔÒÙ"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "òÁÚÒÅÛÅÎÉÅ"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "÷ÙÂÏÒ ÒÁÚÒÅÛÅÎÉÑ É ÇÌÕÂÉÎÙ Ã×ÅÔÁ"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "÷ÉÄÅÏËÁÒÔÁ: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "óÅÒ×ÅÒ XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "òÅÖÉÍ üËÓÐÅÒÔ"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "ðÏËÁÚÁÔØ ×ÓÅ"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "òÁÚÒÅÛÅÎÉÑ"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "òÁÓËÌÁÄËÁ ËÌÁ×ÉÁÔÕÒÙ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "ôÉÐ ÍÙÛÉ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "íÙÛØ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "íÏÎÉÔÏÒ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "þÁÓÔÏÔÁ ÇÏÒ.ÒÁÚ×. ÍÏÎÉÔÏÒÁ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "þÁÓÔÏÔÁ ×ÅÒÔ.ÒÁÚ×. ÍÏÎÉÔÏÒÁ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "÷ÉÄÅÏËÁÒÔÁ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "÷ÉÄÅÏËÁÒÔÁ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "÷ÉÄÅÏÐÁÍÑÔØ: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "çÌÕÂÉÎÁ Ã×ÅÔÁ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "òÁÚÒÅÛÅÎÉÅ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "óÅÒ×ÅÒ XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "äÒÁÊ×ÅÒ XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "ðÏÄÇÏÔÏ×ËÁ ÎÁÓÔÒÏÅË X-Window"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "þÔÏ ×Ù ÈÏÔÉÔÅ ÓÄÅÌÁÔØ?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "óÍÅÎÉÔÅ ÍÏÎÉÔÏÒ"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "óÍÅÎÉÔÅ ×ÉÄÅÏËÁÒÔÕ"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "óÍÅÎÉÔÅ ÏÐÃÉÉ óÅÒ×ÅÒÁ"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "óÍÅÎÉÔÅ ÒÁÚÒÅÛÅÎÉÅ"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "ðÏËÁÚÁÔØ ÉÎÆÏÒÍÁÃÉÀ"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "ðÒÏ×ÅÒÉÔØ ÓÎÏ×Á"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "÷ÙÈÏÄ"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"óÏÈÒÁÎÉÔØ ÉÚÍÅÎÅÎÉÑ?\n"
-"ôÅËÕÝÉÅ ÎÁÓÔÒÏÊËÉ:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "÷ÏÊÄÉÔÅ ÐÏ×ÔÏÒÎÏ × %s ÄÌÑ ÁËÔÉ×ÁÃÉÉ ÉÚÍÅÎÅÎÉÊ"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "÷ÙÊÄÉÔÅ, Á ÚÁÔÅÍ ÉÓÐÏÌØÚÕÊÔÅ Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X ÐÒÉ ÚÁÇÒÕÚËÅ"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"íÏÖÎÏ ÎÁÓÔÒÏÉÔØ ÓÉÓÔÅÍÕ ÄÌÑ Á×ÔÏÍÁÔÉÞÅÓËÏÇÏ ÚÁÐÕÓËÁ X ÐÏÓÌÅ ÚÁÇÒÕÚËÉ.\n"
-"èÏÔÉÔÅ, ÞÔÏÂÙ X ÓÔÁÒÔÏ×ÁÌ ÐÒÉ ÐÅÒÅÚÁÇÒÕÚËÅ?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 Ã×ÅÔÏ× (8 ÂÉÔ)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ÔÙÓÑÞÉ Ã×ÅÔÏ× (15 ÂÉÔ)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ÔÙÓÑÞ Ã×ÅÔÏ× (16 ÂÉÔ)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 ÍÉÌÌÉÏÎÏ× Ã×ÅÔÏ× (24 ÂÉÔÁ)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 ÍÉÌÌÉÁÒÄÁ Ã×ÅÔÏ× (32 ÂÉÔÁ)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB ÉÌÉ ÂÏÌØÛÅ"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "óÔÁÎÄÁÒÔÎÙÊ VGA, 640x480 ÐÒÉ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 ÐÒÉ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "óÏ×ÍÅÓÔÉÍÁ Ó 8514, 1024x768 ÐÒÉ 87 Hz ÞÒÅÚ-ÓÔÒÏÞÎÙÊ (ÎÅÔ 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ÐÒÉ 87 Hz ÞÒÅÚ-ÓÔÒÏÞÎÙÊ, 800x600 ÐÒÉ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 ÐÒÉ 60 Hz, 640x480 ÐÒÉ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 ÐÒÉ 60 Hz, 800x600 ÐÒÉ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA ÷ÙÓÏËÏÊ þÁÓÔÏÔÙ, 1024x768 ÐÒÉ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency ÓÐÏÓÏÂÎÙÊ ÐÏÄÄÅÒÖÉ×ÁÔØ 1280x1024 ÐÒÉ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency ÓÐÏÓÏÂÎÙÊ ÐÏÄÄÅÒÖÉ×ÁÔØ 1280x1024 ÐÒÉ 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency ÓÐÏÓÏÂÎÙÊ ÐÏÄÄÅÒÖÉ×ÁÔØ 1280x1024 ÐÒÉ 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor ÓÐÏÓÏÂÎÙÊ ÐÏÄÄÅÒÖÉ×ÁÔØ 1600x1200 ÐÒÉ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor ÓÐÏÓÏÂÎÙÊ ÐÏÄÄÅÒÖÉ×ÁÔØ 1600x1200 ÐÒÉ 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "ðÅÒ×ÙÊ ÓÅËÔÏÒ ÚÁÇÒÕÚÏÞÎÏÇÏ ÒÁÚÄÅÌÁ"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "ðÅÒ×ÙÊ ÓÅËÔÏÒ ÕÓÔÒÏÊÓÔ×Á (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "õÓÔÁÎÏ×ËÁ SILO"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "ëÕÄÁ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ ÎÁÞÁÌØÎÙÊ ÚÁÇÒÕÚÞÉË?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "õÓÔÁÎÏ×ËÁ LILO/grub"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO Ó ÔÅËÓÔÏ×ÙÍ ÍÅÎÀ"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO Ó ÇÒÁÆÉÞÅÓËÉÍ ÍÅÎÀ"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "úÁÇÒÕÖÁÔØÓÑ ÉÚ DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "çÌÁ×ÎÙÅ ÐÁÒÁÍÅÔÒÙ ÎÁÞÁÌØÎÏÇÏ ÚÁÇÒÕÚÞÉËÁ"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "÷ÙÂÏÒ ÉÓÐÏÌØÚÕÅÍÏÇÏ ÎÁÞÁÌØÎÏÇÏ ÚÁÇÒÕÚÞÉËÁ"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "õÓÔÁÎÏ×ËÁ ÎÁÞÁÌØÎÏÇÏ ÚÁÇÒÕÚÞÉËÁ"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "úÁÇÒÕÚÏÞÎÏÅ ÕÓÔÒÏÊÓÔ×Ï"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ÎÅ ÒÁÂÏÔÁÅÔ ÎÁ ÓÔÁÒÙÈ BIOS)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "ëÏÍÐÁËÔÎÏ"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "ËÏÍÐÁËÔÎÏ"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "÷ÉÄÅÏ-ÒÅÖÉÍ"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "úÁÄÅÒÖËÁ ÐÅÒÅÄ ÚÁÇÒÕÚËÏÊ ÏÂÒÁÚÁ ÐÏ ÕÍÏÌÞÁÎÉÀ"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "ðÁÒÏÌØ"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "ðÁÒÏÌØ (ÅÝÅ ÒÁÚ)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "ïÇÒÁÎÉÞÉÔØ ÐÁÒÁÍÅÔÒÙ ËÏÍÁÎÄÎÏÊ ÓÔÒÏËÉ"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "ÏÇÒÁÎÉÞÉÔØ"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "ïÞÉÝÁÔØ /tmp  ÐÒÉ ËÁÖÄÏÊ ÚÁÇÒÕÚËÅ"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "õËÁÖÉÔÅ ÔÏÞÎÙÊ ÒÁÚÍÅÒ RAM (ÎÁÊÄÅÎÏ %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "òÁÚÒÅÛÉÔØ ÎÅÓËÏÌØËÏ ÐÒÏÆÉÌÅÊ"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "úÁÄÁÊÔÅ ÒÁÚÍÅÒ RAM × Mb"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "ðÕÎËÔ ``ïÇÒÁÎÉÞÉÔØ ÏÐÃÉÉ ËÏÍÁÎÄÎÏÊ ÓÔÒÏËÉ'' ÎÅ ÉÓÐÏÌØÚÕÅÔÓÑ ÂÅÚ ÐÁÒÏÌÑ"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "ðÏÐÒÏÂÕÊÔÅ ÅÝÅ ÒÁÚ"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "ðÁÒÏÌÉ ÎÅ ÓÏ×ÐÁÄÁÀÔ"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "îÁÞÁÌØÎÏÅ ÓÏÏÂÝÅÎÉÅ"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "úÁÄÅÒÖËÁ ÏÔËÒÙÔÉÑ Firmware"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "úÁÄÅÒÖËÁ ÚÁÇÒÕÚËÉ ÑÄÒÁ"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "÷ËÌÀÞÉÔØ ÚÁÇÒÕÚËÕ Ó CD?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "÷ËÌÀÞÉÔØ ÚÁÇÒÕÚËÕ OF?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "ïÐÅÒÁÃÉÏÎÎÁÑ ÓÉÓÔÅÍÁ ÐÏ ÕÍÏÌÞÁÎÉÀ?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"éÍÅÅÔÓÑ ÎÅÓËÏÌØËÏ ÒÁÚÙÎÈ ÐÕÎËÔÏ×.\n"
-"÷Ù ÍÏÖÅÔÅ ÄÏÂÁ×ÉÔØ ÅÝÅ, ÉÌÉ ÉÚÍÅÎÉÔØ ÓÕÝÅÓÔ×ÕÀÝÉÅ."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "äÏÂÁ×ÉÔØ"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "çÏÔÏ×Ï"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "éÚÍÅÎÉÔØ"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "ëÁËÏÊ ÔÉÐ ÐÕÎËÔÁ ×Ù ÈÏÔÉÔÅ ÄÏÂÁ×ÉÔØ?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "äÒÕÇÁÑ ïó (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "äÒÕÇÁÑ ïó (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "äÒÕÇÁÑ ïó (windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "ïÂÒÁÚ"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "äÏÂÁ×ÉÔØ"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "þÔÅÎÉÅ-ÚÁÐÉÓØ"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "ôÁÂÌÉÃÁ"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "îÅÂÅÚÏÐÁÓÎÙÊ"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "íÅÔËÁ"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "õÍÏÌÞÁÎÉÅ"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "òÁÚÍÅÒ Initrd"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "âÅÚ ÇÒÁÆÉËÉ"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "õÄÁÌÉÔØ ÐÕÎËÔ"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "ðÕÓÔÁÑ ÍÅÔËÁ ÎÅ ÄÏÐÕÓËÁÅÔÓÑ"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "üÔÁ ÍÅÔËÁ ÕÖÅ ÉÓÐÏÌØÚÕÅÔÓÑ"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "îÁÊÄÅÎÙ %s %s ÉÎÔÅÒÆÅÊÓÙ"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "åÓÔØ ÌÉ Õ ×ÁÓ ÄÒÕÇÏÊ?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "åÓÔØ ÌÉ Õ ×ÁÓ ËÁËÉÅ-ÌÉÂÏ %s ÉÎÔÅÒÆÅÊÓÙ?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "îÅÔ"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "äÁ"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "óÍ. ÏÐÉÓÁÎÉÅ ÏÂÏÒÕÄÏ×ÁÎÉÑ"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "õÓÔÁÎÏ×ËÁ ÄÒÁÊ×ÅÒÁ ÄÌÑ %s ËÁÒÔÙ %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(ÍÏÄÕÌØ %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "ëÁËÏÊ %s ÄÒÁÊ×ÅÒ ÍÎÅ ÐÏÐÒÏÂÏ×ÁÔØ?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"÷ ÎÅËÏÔÏÒÙÈ ÓÌÕÞÁÑÈ %s ÄÒÁÊ×ÅÒÕ ÎÕÖÎÁ ÎÅËÏÔÏÒÁÑ ÄÏÐÏÌÎÉÔÅÌØÎÁÑ ÉÎÆÏÒÍÁÃÉÑ,\n"
-"ÈÏÔÑ ÏÂÙÞÎÏ ÜÔÏÇÏ ÎÅ ÔÒÅÂÕÅÔÓÑ. îÅ ÈÏÔÉÔÅ ÌÉ ×Ù ÚÁÄÁÔØ ÄÌÑ ÎÅÇÏ\n"
-" ÄÏÐÏÌÎÉÔÅÌØÎÙÅ ÐÁÒÁÍÅÔÒÙ ÉÌÉ ÐÏÚ×ÏÌÉÔÅ ÄÒÁÊ×ÅÒÕ ÐÒÏÔÅÓÔÉÒÏ×ÁÔØ ÍÁÛÉÎÕ\n"
-"× ÐÏÉÓËÁÈ ÎÅÏÂÈÏÄÉÍÏÊ ÉÎÆÏÒÍÁÃÉÉ? ÷ÏÚÍÏÖÎÏ, ÔÅÓÔÉÒÏ×ÁÎÉÅ ÐÏÄ×ÅÓÉÔ ËÏÍÐØÀÔÅÒ, "
-"ÎÏ ÏÎÏ \n"
-"ÎÅ ×ÙÚÏ×ÅÔ ÎÉËÁËÉÈ ÐÏ×ÒÅÖÄÅÎÉÊ."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "á×ÔÏÐÏÉÓË"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "õËÁÖÉÔÅ ÐÁÒÁÍÅÔÒÙ"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "ôÅÐÅÒØ ×Ù ÍÏÖÅÔÅ ÚÁÄÁ×ÁÔØ ÐÁÒÁÍÅÔÒÙ ÄÌÑ ÍÏÄÕÌÑ %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"ôÅÐÅÒØ ×Ù ÍÏÖÅÔÅ ÚÁÄÁ×ÁÔØ ÐÁÒÁÍÅÔÒÙ ÄÌÑ ÍÏÄÕÌÑ %s.\n"
-"ðÁÒÁÍÅÔÒÙ ÚÁÄÁÀÔÓÑ × ÆÏÒÍÁÔÅ ``ÉÍÑ=ÚÎÁÞÅÎÉÅ ÉÍÑ2=ÚÎÁÞÅÎÉÅ2 ...''.\n"
-"îÁÐÒÉÍÅÒ, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "ðÁÒÁÍÅÔÒÙ ÍÏÄÕÌÑ:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"úÁÇÒÕÚËÁ ÍÏÄÕÌÑ %s ÚÁ×ÅÒÛÉÌÁÓØ ÎÅÕÄÁÞÎÏ.\n"
-"èÏÔÉÔÅ ÐÏÐÒÏÂÏ×ÁÔØ ÅÝÅ Ó ÄÒÕÇÉÍÉ ÐÁÒÁÍÅÔÒÁÍÉ?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(ÕÖÅ ÄÏÂÁ×ÌÅÎÏ %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "üÔÏÔ ÐÁÒÏÌØ ÓÌÉÛËÏÍ ÐÒÏÓÔ"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "÷×ÅÄÉÔÅ ÉÍÑ ÐÏÌØÚÏ×ÁÔÅÌÑ"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"éÍÑ ÐÏÌØÚÏ×ÁÔÅÌÑ ÄÏÌÖÎÏ ÓÏÄÅÒÖÁÔØ ÂÕË×Ù ÔÏÌØËÏ × ÎÉÖÎÅÍ ÒÅÇÉÓÔÒÅ, \n"
-"ÃÉÆÒÙ , `-' É `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "üÔÏ ÉÍÑ ÐÏÌØÚÏ×ÁÔÅÌÑ ÕÖÅ ÄÏÂÁ×ÌÅÎÏ"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "äÏÂÁ×ÉÔØ ÐÏÌØÚÏ×ÁÔÅÌÑ"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"÷×ÅÓÔÉ ÐÏÌØÚÏ×ÁÔÅÌÑ\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "ðÒÉÎÑÔØ ÐÏÌØÚÏ×ÁÔÅÌÑ"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "îÁÓÔÏÑÝÅÅ ÉÍÑ"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "ðÏÌØÚÏ×ÁÔÅÌØÓËÏÅ ÉÍÑ"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "ïÂÏÌÏÞËÁ"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "ðÉËÔÏÇÒÁÍÍÁ"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "á×ÔÏ-×ÈÏÄ"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"íÏÖÅÍ ÎÁÓÔÒÏÉÔØ ×ÁÛ ËÏÍÐØÀÔÅÒ ÄÌÑ Á×ÔÏÍÁÔÉÞÅÓËÏÇÏ ×ÈÏÄÁ ÏÄÎÏÇÏ "
-"ÐÏÌØÚÏ×ÁÔÅÌÑ.\n"
-"åÓÌÉ ×Ù ÎÅ ÈÏÔÉÔÅ ÐÏÌØÚÏ×ÁÔØÓÑ ÜÔÏÊ ×ÏÚÍÏÖÎÏÓÔØÀ, ÎÁÖÍÉÔÅ ÎÁ ËÎÏÐËÕ ïÔÍÅÎÉÔØ."
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "÷ÙÂÅÒÉÔÅ ÐÏÌØÚÏ×ÁÔÅÌÑ ÐÏ ÕÍÏÌÞÁÎÉÀ:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "÷ÙÂÅÒÉÔÅ ÍÅÎÅÄÖÅÒ ÏËÏÎ ÄÌÑ ÚÁÐÕÓËÁ:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "õËÁÖÉÔÅ, ËÁËÏÊ ÑÚÙË ÉÓÐÏÌØÚÏ×ÁÔØ."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "÷Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ÄÒÕÇÉÅ ÑÚÙËÉ, ËÏÔÏÒÙÅ ÂÕÄÕÔ ÄÏÓÔÕÐÎÙ ÐÏÓÌÅ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "÷ÓÅ"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"äÏÂÒÏ ÐÏÖÁÌÏ×ÁÔØ %s ÄÉÓÐÅÔÞÅÒ ÏÐÅÒÁÃÉÏÎÎÏÊ ÓÉÓÔÅÍÙ!\n"
-"\n"
-"÷ÙÂÅÒÉÔÅ ÏÐÅÒÁÃÉÏÎÎÕÀ ÓÉÓÔÅÍÕ ÉÚ ÓÐÉÓËÁ ÉÌÉ\n"
-"ÐÏÄÏÖÄÉÔÅ %d ÓÅËÕÎÄ ÄÌÑ ÚÁÇÒÕÚËÉ ÓÉÓÔÅÍÙ, ÕËÁÚÁÎÎÏÊ ÐÏ ÕÍÏÌÞÁÎÉÀ.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "äÏÂÒÏ ÐÏÖÁÌÏ×ÁÔØ × GRUB, ÄÉÓÐÅÔÞÅÒ ÏÐÅÒÁÃÉÏÎÎÏÊ ÓÉÓÔÅÍÙ!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "éÓÐÏÌØÚÕÊÔÅ ËÌÁ×ÉÛÉ %c É %c ÄÌÑ ×ÙÄÅÌÅÎÉÑ ÐÕÎËÔÁ."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "îÁÖÍÉÔÅ enter ÄÌÑ ÚÁÇÒÕÚËÉ ×ÙÂÒÁÎÎÏÊ ïó, 'e' ÄÌÑ ÒÅÄÁËÔÉÒÏ×ÁÎÉÑ"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ËÏÍÁÎÄ ÐÅÒÅÄ ÚÁÇÒÕÚËÏÊ, ÉÌÉ 'c' ÄÌÑ ÒÅÖÉÍÁ ËÏÍÁÎÄÎÏÊ ÓÔÒÏËÉ."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "÷ÙÂÒÁÎÎÙÊ ÐÕÎËÔ ÂÕÄÅÔ ÚÁÇÒÕÖÅÎ Á×ÔÏÍÁÔÉÞÅÓËÉ ÞÅÒÅÚ %d ÓÅËÕÎÄ."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "ÎÅ È×ÁÔÁÅÔ ÍÅÓÔÁ × /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "òÁÂÏÞÉÊ ÓÔÏÌ"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "óÔÁÒÔÏ×ÏÅ ÍÅÎÀ"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "ëÕÄÁ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ ÎÁÞÁÌØÎÙÊ ÚÁÇÒÕÚÞÉË?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ÓÐÒÁ×ËÁ ÐÏËÁ ÎÅ ÓÏÚÄÁÎÁ.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "îÁÓÔÒÏÊËÁ ×ÉÄÁ ÚÁÇÒÕÚËÉ"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_æÁÊÌ"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/æÁÊÌ/_÷ÙÈÏÄ"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "íÏÎÉÔÏÒ ËÁÔÅÇÏÒÉÉ NewStyle"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle íÏÎÉÔÏÒ"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "ôÒÁÄÉÃÉÏÎÎÙÊ ÍÏÎÉÔÏÒ"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "ôÒÁÄÉÃÉÏÎÎÙÊ Gtk+ ÍÏÎÉÔÏÒ"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "úÁÐÕÓËÁÔØ Aurora ÐÒÉ ÚÁÇÒÕÚËÅ"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "òÅÖÉÍ Lilo/grub"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"÷ ÄÁÎÎÙÊ ÍÏÍÅÎÔ ×Ù ÉÓÐÏÌØÚÕÅÔÅ %s × ËÁÞÅÓÔ×Å ÍÅÎÅÄÖÅÒÁ ÚÁÇÒÕÚËÉ.\n"
-"÷ÙÂÅÒÉÔÅ ÐÕÎËÔ îÁÓÔÒÏÊËÁ ÄÌÑ ÚÁÐÕÓËÁ ÍÁÓÔÅÒÁ ÎÁÓÔÒÏÊËÉ."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "îÁÓÔÒÏÊËÁ"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "òÅÖÉÍ ÚÁÇÒÕÚËÉ"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "óÉÓÔÅÍÎÙÊ ÒÅÖÉÍ"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "úÁÐÕÓËÁÔØ X-Window ÐÒÉ ÎÁÞÁÌÅ ÒÁÂÏÔÙ"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "îÅÔ, Ñ ÎÅ ÈÏÞÕ ÉÓÐÏÌØÚÏ×ÁÔØ Á×ÔÏÍÁÔÉÞÅÓËÉÊ ×ÈÏÄ × ÓÉÓÔÅÍÕ"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"äÁ, Ñ ÈÏÞÕ ÉÓÐÏÌØÚÏ×ÁÔØ Á×ÔÏÍÁÔÉÞÅÓËÉÊ ×ÈÏÄ × ÓÉÓÔÅÍÕ Ó ÜÔÉÍÉ (user, desktop)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "ïÔÍÅÎÁ"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ÎÅ×ÏÚÍÏÖÎÏ ÏÔËÒÙÔØ ÄÌÑ ÞÔÅÎÉÑ /etc/inittab : %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "õÓÔÁÎÏ×ËÁ LILO ÚÁ×ÅÒÛÉÌÁÓØ ÎÅÕÄÁÞÎÏ. ðÒÏÉÚÏÛÌÁ ÓÌÅÄÕÀÝÁÑ ÏÛÉÂËÁ:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "Gb"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "Kb"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "Mb"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "Tb"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d ÍÉÎÕÔ"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 ÍÉÎÕÔÁ"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d ÓÅËÕÎÄ"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "ðÒÅÖÄÅ ×ÓÅÇÏ ÓÄÅÌÁÊÔÅ ÒÅÚÅÒ×ÎÕÀ ËÏÐÉÀ ÄÁÎÎÙÈ"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "þÉÔÁÊÔÅ ×ÎÉÍÁÔÅÌØÎÏ!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"åÓÌÉ ÐÌÁÎÉÒÕÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ aboot, ÏÓÔÁ×ØÔÅ Ó×ÏÂÏÄÎÏÅ ÍÅÓÔÏ (2048 ÓÅËÔÏÒÏ× "
-"ÂÕÄÅÔ ÄÏÓÔÁÔÏÞÎÏ)\n"
-"× ÎÁÞÁÌÅ ÄÉÓËÁ"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "ïÛÉÂËÁ"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "íÁÓÔÅÒ"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "îÏ×ÙÊ"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "õÄÁÌÅÎÎÁÑ ÏÞÅÒÅÄØ"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "ôÏÞËÁ ÍÏÎÔÉÒÏ×ÁÎÉÑ"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "ðÁÒÁÍÅÔÒÙ"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "ôÉÐ"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "ïÔÍÏÎÔÉÒÏ×ÁÔØ"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "íÏÎÔÉÒÏ×ÁÎÉÅ"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "÷ÙÂÅÒÉÔÅ ÄÅÊÓÔ×ÉÅ"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"õ ×ÁÓ ÅÓÔØ ÔÏÌØËÏ ÂÏÌØÛÏÊ ÒÁÚÄÅÌ FAT\n"
-"(ÏÂÙÞÎÏ ÉÓÐÏÌØÚÕÅÍÙÊ MicroSoft Dos/Windows).\n"
-"ðÒÅÄÌÁÇÁÀ ÐÒÅÖÄÅ ×ÓÅÇÏ ÉÚÍÅÎÉÔØ ÒÁÚÍÅÒ ÒÁÚÄÅÌÁ\n"
-"(ËÌÉËÎÉÔÅ ÎÁ ÎÅÇÏ, Á ÚÁÔÅÍ ÎÁ \"éÚÍÅÎÉÔØ ÒÁÚÍÅÒ\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "ðÏÖÁÌÕÊÓÔÁ ÎÁÖÍÉÔÅ ÎÁ ÒÁÚÄÅÌ"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "ðÏÖÁÌÕÊÓÔÁ ÎÁÖÍÉÔÅ ÎÁ ÒÁÚÄÅÌ"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "ðÏÖÁÌÕÊÓÔÁ ÎÁÖÍÉÔÅ ÎÁ ÒÁÚÄÅÌ"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "ðÏÄÒÏÂÎÏÓÔÉ"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "ÏÛÉÂËÁ ÍÏÎÔÉÒÏ×ÁÎÉÑ"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "ðÕÓÔÏ"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "äÒÕÇÉÅ"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "ôÉÐÙ ÆÁÊÌÏ×ÙÈ ÓÉÓÔÅÍ:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "óÏÚÄÁÔØ"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "÷ÍÅÓÔÏ ÜÔÏÇÏ ÉÓÐÏÌØÚÕÊÔÅ ``%s'' "
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "õÄÁÌÉÔØ"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "óÎÁÞÁÌÁ ÓÄÅÌÁÊÔÅ ``ïÔÍÏÎÔÉÒÏ×ÁÔØ''"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"ðÏÓÌÅ ÉÚÍÅÎÅÎÉÑ ÔÉÐÁ ÒÁÚÄÅÌÁ %s, ×ÓÅ ÄÁÎÎÙÅ × ÜÔÏÍ ÒÁÚÄÅÌÅ ÂÕÄÕÔ ÐÏÔÅÒÑÎÙ"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "ëÕÄÁ ×Ù ÈÏÔÉÔÅ ÐÒÉÍÏÎÔÉÒÏ×ÁÔØ ÕÓÔÒÏÊÓÔ×Ï %s?"
-
-#: ../../diskdrake.pm_.c:500
-#, fuzzy
-msgid "Mount options"
-msgstr "ðÁÒÁÍÅÔÒÙ ÍÏÄÕÌÑ:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:525
-#, fuzzy
-msgid "Removable media"
-msgstr "á×ÔÏÍÏÎÔÉÒÏ×ÁÎÉÅ ÓßÅÍÎÙÈ ÎÏÓÉÔÅÌÅÊ"
-
-#: ../../diskdrake.pm_.c:532
-#, fuzzy
-msgid "Change type"
-msgstr "éÚÍÅÎÉÔØ ÔÉÐ ÒÁÚÄÅÌÁ"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "ëÁËÕÀ ÆÁÊÌÏ×ÕÀ ÓÉÓÔÅÍÕ ×Ù ÈÏÔÉÔÅ?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "óÅÒ×ÅÒ"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "÷ÙÂÅÒÉÔÅ ÄÅÊÓÔ×ÉÅ"
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose another partition"
-msgstr "óÏÚÄÁÔØ ÎÏ×ÙÊ ÒÁÚÄÅÌ"
-
-#: ../../diskdrake_interactive.pm_.c:188
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "ðÅÒÅËÌÀÞÅÎÉÅ × ÒÅÖÉÍ üËÓÐÅÒÔ"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "ðÅÒÅËÌÀÞÅÎÉÅ × ÒÅÖÉÍ îÏÒÍÁÌØÎÏ"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "ïÔËÁÔ"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "÷ÓÅ-ÔÁËÉ ÐÒÏÄÏÌÖÁÔØ?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "÷ÙÊÔÉ ÂÅÚ ÓÏÈÒÁÎÅÎÉÑ"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "÷ÙÊÔÉ ÂÅÚ ÚÁÐÉÓÉ ÔÁÂÌÉÃÙ ÒÁÚÄÅÌÏ×?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "èÏÔÉÔÅ ÐÒÏÔÅÓÔÉÒÏ×ÁÔØ ÎÁÓÔÒÏÊËÉ?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "òÁÚÍÅÓÔÉÔØ Á×ÔÏÍÁÔÉÞÅÓËÉ"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "ïÞÉÓÔÉÔØ ×ÓÅ"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "åÝÅ"
-
-#: ../../diskdrake_interactive.pm_.c:250
-#, fuzzy
-msgid "Hard drive information"
-msgstr "ïÐÒÅÄÅÌÅÎÉÅ ÖÅÓÔËÏÇÏ ÄÉÓËÁ"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "îÅÄÏÓÔÁÔÏÞÎÏ Ó×ÏÂÏÄÎÏÇÏ ÍÅÓÔÁ ÄÌÑ Á×ÔÏ-ÒÁÚÍÅÝÅÎÉÑ"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "÷ÓÅ ÐÅÒ×ÉÞÎÙÅ ÒÁÚÄÅÌÙ ÕÖÅ ÉÓÐÏÌØÚÏ×ÁÎÙ"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "äÏÂÁ×ÌÅÎÉÅ ÎÏ×ÙÈ ÒÁÚÄÅÌÏ× ÎÅ×ÏÚÍÏÖÎÏ"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"þÔÏÂÙ ÐÏÌÕÞÉÔØ ÂÏÌØÛÅ ÒÁÚÄÅÌÏ×, ÕÄÁÌÉÔÅ ÏÄÉÎ, ÞÔÏÂÙ ÐÏÌÕÞÉÔØ ×ÏÚÍÏÖÎÏÓÔØ "
-"ÓÏÚÄÁÔØ ÒÁÛÉÒÅÎÎÙÊ ÒÁÚÄÅÌ"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "úÁÐÉÓÁÔØ ÔÁÂÌÉÃÕ ÒÁÚÄÅÌÏ×"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "úÁÐÁÓÎÁÑ ÔÁÂÌÉÃÁ ÒÁÚÄÅÌÏ×"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "úÁÐÁÓÎÁÑ ÔÁÂÌÉÃÁ ÒÁÚÄÅÌÏ×"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "úÁÐÁÓÎÁÑ ÔÁÂÌÉÃÁ ÒÁÚÄÅÌÏ×"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "á×ÔÏÍÏÎÔÉÒÏ×ÁÎÉÅ ÓßÅÍÎÙÈ ÎÏÓÉÔÅÌÅÊ"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "÷ÙÂÅÒÉÔÅ ÆÁÊÌ"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"òÅÚÅÒ×ÎÁÑ ÔÁÂÌÉÃÁ ÒÁÚÄÅÌÏ× ÄÉÓËÁ ÉÍÅÅÔ ÄÒÕÇÏÊ ÒÁÚÍÅÒ\n"
-"÷ÓÅ-ÔÁËÉ ÐÒÏÄÏÌÖÉÔØ?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "÷ÎÉÍÁÎÉÅ"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"÷ÓÔÁ×ØÔÅ ÄÉÓËÅÔÕ × ÄÉÓËÏ×ÏÄ\n"
-"÷ÓÅ ÄÁÎÎÙÅ ÎÁ ÜÔÏÊ ÄÉÓËÅÔÅ ÂÕÄÕÔ ÐÏÔÅÒÑÎÙ"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "ðÒÏÂÕÅÍ ×ÏÓÓÔÁÎÏ×ÉÔØ ÔÁÂÌÉÃÕ ÒÁÚÄÅÌÏ×"
-
-#: ../../diskdrake_interactive.pm_.c:340
-#, fuzzy
-msgid "Detailed information"
-msgstr "ðÏËÁÚÁÔØ ÉÎÆÏÒÍÁÃÉÀ"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "éÚÍÅÎÉÔØ ÒÁÚÍÅÒ"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "ðÅÒÅÍÅÓÔÉÔØ"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "æÏÒÍÁÔÉÒÏ×ÁÔØ"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "áËÔÉ×ÎÙÊ"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "äÏÂÁ×ÉÔØ Ë RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "äÏÂÁ×ÉÔØ Ë LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "õÄÁÌÉÔØ ÉÚ RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "õÄÁÌÉÔØ ÉÚ LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "éÚÍÅÎÉÔØ RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "éÓÐÏÌØÚÏ×ÁÔØ ÄÌÑ loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "óÏÚÄÁÔØ ÎÏ×ÙÊ ÒÁÚÄÅÌ"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "îÁÞÁÌØÎÙÊ ÓÅËÔÏÒ: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "òÁÚÍÅÒ × MB: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "ôÉÐ ÆÁÊÌÏ×ÏÊ ÓÉÓÔÅÍÙ: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "ôÏÞËÁ ÍÏÎÔÉÒÏ×ÁÎÉÑ:"
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "ðÒÅÄÐÏÞÔÅÎÉÅ: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "æÏÒÍÁÔÉÒÏ×ÁÎÉÅ ÆÁÊÌÁ loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "éÚÍÅÎÉÔØ ÔÉÐ ÒÁÚÄÅÌÁ"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "ëÕÄÁ ×Ù ÈÏÔÉÔÅ ÐÒÉÍÏÎÔÉÒÏ×ÁÔØ loopback ÆÁÊÌ %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"îÅ ÍÏÇÕ ÏÔÍÅÎÉÔØ ÔÏÞËÕ ÍÏÎÔÉÒÏ×ÁÎÉÑ, ÐÏÓËÏÌØËÕ ÜÔÏÔ ÒÁÚÄÅÌ ÚÁÄÅÊÓÔ×Ï×ÁÎ ÄÌÑ "
-"loop back. óÎÁÞÁÌÁ ÕÂÅÒÉÔÅ loopback"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "÷ÙÞÉÓÌÅÎÉÅ ÇÒÁÎÉà ÆÁÊÌÏ×ÏÊ ÓÉÓÔÅÍÙ FAT"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "éÚÍÅÎÅÎÉÅ ÒÁÚÍÅÒÁ"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "òÁÚÍÅÒ ÜÔÏÇÏ ÒÁÚÄÅÌÁ ÎÅÌØÚÑ ÉÚÍÅÎÉÔØ"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "äÌÑ ×ÓÅÈ ÄÁÎÎÙÈ × ÜÔÏÍ ÒÁÚÄÅÌÅ ÄÏÌÖÎÁ ÂÙÔØ ÓÄÅÌÁÎÁ ÒÅÚÅÒ×ÎÁÑ ËÏÐÉÑ"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"ðÏÓÌÅ ÉÚÍÅÎÅÎÉÑ ÒÁÚÍÅÒÁ ÒÁÚÄÅÌÁ %s ×ÓÅ ÄÁÎÎÙÅ × ÜÔÏÍ ÒÁÚÄÅÌÅ ÂÕÄÕÔ ÐÏÔÅÒÑÎÙ"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "÷ÙÂÒÁÔØ ÎÏ×ÙÊ ÒÁÚÍÅÒ"
-
-#: ../../diskdrake_interactive.pm_.c:591
-#, fuzzy
-msgid "New size in MB: "
-msgstr "òÁÚÍÅÒ × MB: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "îÁ ËÁËÏÊ ÄÉÓË ÈÏÔÉÔÅ ÐÅÒÅÍÅÓÔÉÔØ?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "óÅËÔÏÒ"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "îÁ ËÁËÏÊ ÓÅËÔÏÒ ÈÏÔÉÔÅ ÐÅÒÅÍÅÓÔÉÔØ?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "ðÅÒÅÍÅÝÅÎÉÅ"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "ðÅÒÅÍÅÝÅÎÉÅ ÒÁÚÄÅÌÁ..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "÷ÙÂÅÒÉÔÅ ÓÕÝÅÓÔ×ÕÀÝÉÊ RAID ÄÌÑ ÄÏÂÁ×ÌÅÎÉÑ"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "ÎÏ×ÙÊ"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "÷ÙÂÅÒÉÔÅ ÓÕÝÅÓÔ×ÕÀÝÉÊ LVM ÄÌÑ ÄÏÂÁ×ÌÅÎÉÑ"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "éÍÑ LVM?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "üÔÏÔ ÒÁÚÄÅÌ ÎÅÌØÚÑ ÉÓÐÏÌØÚÏ×ÁÔØ ÄÌÑ loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "éÍÑ ÆÁÊÌÁ loopback: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "îÁÓÔÏÑÝÅÅ ÉÍÑ"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "æÁÊÌ ÕÖÅ ÉÓÐÏÌØÚÕÅÔÓÑ ÄÒÕÇÉÍ loopback, ×ÙÂÅÒÉÔÅ ÄÒÕÇÏÊ ÆÁÊÌ."
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "æÁÊÌ ÕÖÅ ÓÕÝÅÓÔ×ÕÅÔ. éÓÐÏÌØÚÏ×ÁÔØ ÅÇÏ?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "ÕÓÔÒÏÊÓÔ×Ï"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "ÕÒÏ×ÅÎØ"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "ÒÁÚÍÅÒ chunk"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "ïÓÔÏÒÏÖÎÏ: ÜÔÁ ÏÐÅÒÁÃÉÑ ÏÐÁÓÎÁ."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "ëÁËÏÊ ÔÉÐ ÒÁÚÂÉÅÎÉÑ ÎÁ ÒÁÚÄÅÌÙ?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"éÚ×ÉÎÉÔÅ, ÎÏ ÎÅÌØÚÑ ÓÏÚÄÁ×ÁÔØ /boot ÎÁ ÄÉÓËÅ (ÎÁ ÃÉÌÉÎÄÒÅ > 1024).\n"
-"ìÉÂÏ ×Ù ÉÓÐÏÌØÚÕÅÔÅ LILO - ÔÏÇÄÁ ÜÔÏ ÎÅ ÂÕÄÅÔ ÒÁÂÏÔÁÔØ, ÌÉÂÏ LILO ÎÅ "
-"ÉÓÐÏÌØÚÕÅÔÓÑ, É ÔÏÇÄÁ /boot ÎÅ ÎÕÖÅÎ."
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"òÁÚÄÅÌ, ×ÙÂÒÁÎÎÙÊ ×ÁÍÉ ÄÌÑ ÄÏÂÁ×ÌÅÎÉÑ × ËÁÞÅÓÔ×Å ËÏÒÎÅ×ÏÇÏ (/) ÆÉÚÉÞÅÓËÉ "
-"ÒÁÓÐÏÌÏÖÅÎ ÐÏÓÌÅ\n"
-"1024-ÇÏ ÃÉÌÉÎÄÒÁ ÖÅÓÔËÏÇÏ ÄÉÓËÁ, Á Õ ×ÁÓ ÎÅÔ ÒÁÚÄÅÌÁ /boot .\n"
-"åÓÌÉ ÂÕÄÅÔ ÉÓÐÏÌØÚÏ×ÁÔØÓÑ ÄÉÓÐÅÔÞÅÒ ÚÁÇÒÕÚËÉ LILO, ÎÅ ÚÁÂÕÄØÔÅ ÄÏÂÁ×ÉÔØ "
-"ÒÁÚÄÅÌ /boot"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"÷Ù ×ÙÂÒÁÌÉ ÒÁÚÄÅÌ ÐÒÏÇÒÁÍÍÎÏÇÏ RAID × ËÁÞÅÓÔ×Å ËÏÒÎÅ×ÏÇÏ (/).\n"
-"îÉËÁËÏÊ ÚÁÇÒÕÚÞÉË ÎÅ ÓÍÏÖÅÔ ÜÔÏ ÏÂÒÁÂÏÔÁÔØ ÂÅÚ ÒÁÚÄÅÌÁ /boot.\n"
-"ôÁË ÞÔÏ ÎÅ ÚÁÂÕÄØÔÅ ÄÏÂÁ×ÉÔØ ÒÁÚÄÅÌ /boot"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "ôÁÂÌÉÃÁ ÒÁÚÄÅÌÏ× ÕÓÔÒÏÊÓÔ×Á %s ÂÕÄÅÔ ÚÁÐÉÓÁÎÁ ÎÁ ÄÉÓË!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "þÔÏÂÙ ÉÚÍÅÎÅÎÉÑ ÏÓÕÝÅÓÔ×ÉÌÉÓØ, ÎÅÏÂÈÏÄÉÍÏ ÐÅÒÅÚÁÇÒÕÚÉÔØÓÑ"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"ðÏÓÌÅ ÆÏÒÍÁÔÉÒÏ×ÁÎÉÑ ÒÁÚÄÅÌÁ %s, ×ÓÅ ÄÁÎÎÙÅ × ÜÔÏÍ ÒÁÚÄÅÌÅ ÂÕÄÕÔ ÐÏÔÅÒÑÎÙ"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "æÏÒÍÁÔÉÒÏ×ÁÎÉÅ"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "æÏÒÍÁÔÉÒÏ×ÁÎÉÅ ÆÁÊÌÁ loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "æÏÒÍÁÔÉÒÏ×ÁÎÉÅ ÒÁÚÄÅÌÁ %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid ÎÅ ÓÒÁÂÏÔÁÌ"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "îÅÄÏÓÔÁÔÏÞÎÏ Ó×ÏÂÏÄÎÏÇÏ ÍÅÓÔÁ ÄÌÑ ÒÁÚÍÅÝÅÎÉÑ ÎÏ×ÙÈ ÒÁÚÄÅÌÏ×"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "îÅÄÏÓÔÁÔÏÞÎÏ Ó×ÏÂÏÄÎÏÇÏ ÍÅÓÔÁ ÄÌÑ ÒÁÚÍÅÝÅÎÉÑ ÎÏ×ÙÈ ÒÁÚÄÅÌÏ×"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "òÁÚÒÅÛÅÎÉÅ: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "õÓÔÒÏÊÓÔ×Ï: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "ÂÕË×Á ÄÌÑ DOS-ÄÉÓËÁ: %s (ÎÁÕÇÁÄ)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "ôÉÐ: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "éÍÑ: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "îÁÞÁÌÏ: ÓÅËÔÏÒ %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "òÁÚÍÅÒ: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ÓÅËÔÏÒÏ×"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "ó ÃÉÌÉÎÄÒÁ %d ÐÏ ÃÉÌÉÎÄÒ %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "ïÔÆÏÒÍÁÔÉÒÏ×ÁÎÏ\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "îÅ ÏÔÆÏÒÍÁÔÉÒÏ×ÁÎÏ\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "ðÒÉÍÏÎÔÉÒÏ×ÁÎÏ\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback ÆÁÊÌ(Ù): %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"òÁÚÄÅÌ, ÚÁÇÒÕÖÁÅÍÙÊ ÐÏ ÕÍÏÌÞÁÎÉÀ\n"
-"    (ÄÌÑ ÚÁÇÒÕÚËÉ MS-DOS, ÎÅ ÄÌÑ lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "õÒÏ×ÅÎØ %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "òÁÚÍÅÒ Óhunk %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "äÉÓËÉ RAID %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "éÍÑ ÆÁÊÌÁ Loopback: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"åÓÔØ ×ÅÒÏÑÔÎÏÓÔØ, ÞÔÏ ÜÔÏÔ ÒÁÚÄÅÌ\n"
-"Ñ×ÌÑÅÔÓÑ ÒÁÚÄÅÌÏÍ ÄÒÁÊ×ÅÒÁ, ×ÏÚÍÏÖÎÏ,\n"
-"×ÁÍ ÎÅ ÓÌÅÄÕÅÔ ÅÇÏ ÔÒÏÇÁÔØ.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"üÔÏÔ ÓÐÅÃÉÁÌØÎÙÊ Bootstrap\n"
-"ÒÁÚÄÅÌ ÐÒÅÄÎÁÚÎÁÞÅÎ\n"
-"ÄÌÑ ×ÏÚÍÏÖÎÏÓÔÉ ÚÁÇÒÕÚËÉ Ä×ÕÈ ÏÐ.ÓÉÓÔÅÍ.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "òÁÚÍÅÒ: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "çÅÏÍÅÔÒÉÑ: %s ÃÉÌÉÎÄÒÏ×, %s ÇÏÌÏ×ÏË, %s ÓÅËÔÏÒÏ×\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "éÎÆÏÒÍÁÃÉÑ: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-ÄÉÓËÉ %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "ôÉÐ ÔÁÂÌÉÃÙ ÒÁÚÄÅÌÏ×: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "ÎÁ ÛÉÎÅ %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "ðÁÒÁÍÅÔÒÙ: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ÏÛÉÂËÁ ÆÏÒÍÁÔÉÒÏ×ÁÎÉÑ %s"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "îÅ ÚÎÁÀ ËÁË ÆÏÒÍÁÔÉÒÏ×ÁÔØ %s Ó ÔÉÐÏÍ %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "ÏÛÉÂËÁ ÍÏÎÔÉÒÏ×ÁÎÉÑ"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "ÏÛÉÂËÁ ÍÏÎÔÉÒÏ×ÁÎÉÑ: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "ÏÛÉÂËÁ ÏÔÍÏÎÔÉÒÏ×ÁÎÉÑ %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "ÐÒÏÓÔÏÊ"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "ÓÅÒ×ÅÒ"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "÷Ù ÎÅ ÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ JFS ÎÁ ÒÁÚÄÅÌÁÈ ÍÅÎØÛÅ 16MB"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "÷Ù ÎÅ ÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ReiserFS ÎÁ ÒÁÚÄÅÌÁÈ ÍÅÎØÛÅ 32MB"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "ôÏÞËÁ ÍÏÎÔÉÒÏ×ÁÎÉÑ ÄÏÌÖÎÁ ÎÁÞÉÎÁÔØÓÑ Ó /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "õÖÅ ÅÓÔØ ÒÁÚÄÅÌ Ó ÔÏÞËÏÊ ÍÏÎÔÉÒÏ×ÁÎÉÑ %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "÷Ù ÎÅ ÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ìÏÇÉÞÅÓËÉÊ ôÏÍ LVM ÄÌÑ ÔÏÞËÉ ÍÏÎÔÉÒÏ×ÁÎÉÑ %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "üÔÁ ÄÉÒÅËÔÏÒÉÑ ÄÏÌÖÎÁ ÏÓÔÁ×ÁÔØÓÑ ×ÎÕÔÒÉ ËÏÒÎÅ×ÏÊ ÆÁÊÌÏ×ÏÊ ÓÉÓÔÅÍÙ"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"äÌÑ ÜÔÏÊ ÔÏÞËÉ ÍÏÎÔÉÒÏ×ÁÎÉÑ ÎÕÖÎÁ ÒÅÁÌØÎÁÑ ÆÁÊÌÏ×ÁÑ ÓÉÓÔÅÍÁ (ext2, "
-"reiserfs)\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "ïÛÉÂËÁ ÏÔËÒÙÔÉÑ %s ÄÌÑ ÚÁÐÉÓÉ: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"ðÒÏÉÚÏÛÌÁ ÏÛÉÂËÁ: ÎÅ ÎÁÊÄÅÎÙ ÕÓÔÒÏÊÓÔ×Á ÄÌÑ ÓÏÚÄÁÎÉÑ ÎÏ×ÙÈ ÆÁÊÌÏ×ÙÈ ÓÉÓÔÅÍ. "
-"ðÒÏ×ÅÒØÔÅ ÏÂÏÒÕÄÏ×ÁÎÉÅ ÄÌÑ ×ÙÑÓÎÅÎÉÑ ×ÅÒÏÑÔÎÏÊ ÐÒÉÞÉÎÙ."
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "õ ×ÁÓ ÎÅ ÓÏÚÄÁÎÏ ÎÉËÁËÉÈ ÒÁÚÄÅÌÏ×!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"÷ÙÛÅ ÐÅÒÅÞÉÓÌÅÎÙ ÓÕÝÅÓÔ×ÕÀÝÉÅ ÒÁÚÄÅÌÙ Linux, ÏÂÎÁÒÕÖÅÎÎÙÅ ÎÁ\n"
-"×ÁÛÅÍ ÖÅÓÔËÏÍ ÄÉÓËÅ. ÷Ù ÍÏÖÅÔÅ ÏÓÔÁ×ÉÔØ ÉÚÍÅÎÅÎÉÑ, ÓÄÅÌÁÎÎÙÅ ÍÁÓÔÅÒÏÍ, "
-"ÏÂÙÞÎÏ ÏÎÉ ÐÏÄÈÏÄÑÔ \n"
-". åÓÌÉ ×Ù ÉÈ ÉÚÍÅÎÉÔÅ, ÷Ù ÄÏÌÖÎÙ ËÁË ÍÉÍÎÉÍÕÍ ÚÁÄÁÔØ ËÏÒÎÅ×ÏÊ (root)\n"
-"ÒÁÚÄÅÌ (\"/\"). îÅ ÄÅÌÁÊÔÅ ÅÇÏ ÓÌÉÛËÏÍ ÍÁÌÅÎØËÉÍ, ÉÎÁÞÅ ×Ù ÎÅ ÓÍÏÖÅÔÅ "
-"ÕÓÔÁÎÏ×ÉÔØ ×ÓÅ ÎÕÖÎÙÅ ÐÒÏÇÒÁÍÍÙ \n"
-". åÓÌÉ ×Ù ÈÏÔÉÔÅ ÈÒÁÎÉÔØ ÷ÁÛÉ ÄÁÎÎÙÅ ÎÁ ÏÔÄÅÌØÎÏÍ ÒÁÚÄÅÌÅ ÷ÁÍ ÔÁËÖÅ,\n"
-"ÐÏÔÒÅÂÕÅÔÓÑ ×ÙÂÒÁÔØ \"/home\" (ÜÔÏ ×ÏÚÍÏÖÎÏ ÌÉÛØ × ÔÏÍ ÓÌÕÞÁÅ, ËÏÇÄÁ Õ ÷ÁÓ "
-"ÅÓÔØ\n"
-"ÂÏÌÅÅ ÏÄÎÏÇÏ ÒÁÚÄÅÌÁ Linux).\n"
-"\n"
-"\n"
-"äÌÑ ÓÐÒÁ×ËÉ - ËÁÖÄÙÊ ÒÁÚÄÅÌ ÏÐÉÓÙ×ÁÅÔÓÑ ÓÌÅÄÕÀÝÉÍ ÏÂÒÁÚÏÍ: \"éÍÑ\", \"åÍËÏÓÔØ"
-"\".\n"
-"\n"
-"\n"
-"\"éÍÑ\" ÏÐÉÓÙ×ÁÅÔÓÑ ÓÌÅÄÕÀÝÉÍ ÏÂÒÁÚÏÍ: \"ÔÉÐ ÖÅÓÔËÏÇÏ ÄÉÓËÁ\", \"ÎÏÍÅÒ "
-"ÖÅÓÔËÏÇÏ ÄÉÓËÁ\",\n"
-"\"ÎÏÍÅÒ ÒÁÚÄÅÌÁ\" (ÎÁÐÒÉÍÅÒ, \"hda1\").\n"
-"\n"
-"\n"
-"\"ôÉÐ ÖÅÓÔËÏÇÏ ÄÉÓËÁ\" - \"hd\" ÅÓÌÉ Õ ÷ÁÓ ÖÅÓÔËÉÊ ÄÉÓË Ó IDE ÉÎÔÅÒÆÅÊÓÏÍ É "
-"\"sd\"\n"
-"ÅÓÌÉ ÜÔÏ SCSI ÄÉÓË.\n"
-"\n"
-"\n"
-"\"îÏÍÅÒ ÖÅÓÔËÏÇÏ ÄÉÓËÁ\" ÜÔÏ ×ÓÅÇÄÁ ÂÕË×Á ÐÏÓÌÅ \"hd\" or \"sd\". äÌÑ "
-"ÖÅÓÔËÉÈ ÄÉÓËÏ× IDE:\n"
-"\n"
-"   * \"a\" ÏÚÎÁÞÁÅÔ \"master ÄÉÓË ÎÁ ÐÅÒ×ÏÍ IDE ËÏÎÔÒÏÌÌÅÒÅ\",\n"
-"\n"
-"   * \"b\" ÏÚÎÁÞÁÅÔ \"slave ÄÉÓË ÎÁ ÐÅÒ×ÏÍ IDE ËÏÎÔÒÏÌÌÅÒÅ\",\n"
-"\n"
-"   * \"c\" ÏÚÎÁÞÁÅÔ \"master ÄÉÓË ÎÁ ×ÔÏÒÏÍ IDE ËÏÎÔÒÏÌÌÅÒÅ\",\n"
-"\n"
-"   * \"d\" ÏÚÎÁÞÁÅÔ \"slave ÄÉÓË ÎÁ ×ÔÏÒÏÍ IDE ËÏÎÔÒÏÌÌÅÒÅ\".\n"
-"\n"
-"\n"
-"äÌÑ ÖÅÓÔËÉÈ ÄÉÓËÏ× SCSI, \"a\" ÏÚÎÁÞÁÅÔ \"ÐÅÒ×ÙÊ ÄÉÓË\", \"b\" ÏÚÎÁÞÁÅÔ "
-"\"×ÔÏÒÏÊ ÄÉÓË\", É Ô.Ä."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ÓÅÒ×ÉÓÙ, ËÏÔÏÒÙÅ ÂÕÄÕÔ ÚÁÐÕÓËÁÔØÓÑ ÐÒÉ ÚÁÇÒÕÚËÅ.\n"
-"\n"
-"\n"
-"ëÏÇÄÁ ×Ù ÎÁ×ÏÄÉÔÅ ÍÙÛØ ÎÁ ÐÕÎËÔ, ÂÕÄÅÔ ÐÏËÁÚÁÎÁ ÍÁÌÅÎØËÁÑ ÐÏÄÓËÁÚËÁ \n"
-"Ó ÏÐÉÓÁÎÉÅÍ ÆÕÎËÃÉÊ ÜÔÏÇÏ ÓÅÒ×ÉÓÁ.\n"
-"\n"
-"\n"
-"âÕÄØÔÅ ÏÞÅÎØ ÁËËÕÒÁÔÎÙ ÎÁ ÜÔÏÍ ÜÔÁÐÅ, ÅÓÌÉ ×Ù ÐÌÁÎÉÒÕÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ×ÁÛÕ "
-"ÍÁÛÉÎÕ × ËÁÞÅÓÔ×Å ÓÅÒ×ÅÒÁ: ×Ù\n"
-"×ÏÚÍÏÖÎÏ ÎÅ ÚÁÈÏÔÉÔÅ ÚÁÐÕÓËÁÔØ ÌÉÛÎÉÅ ÓÅÒ×ÉÓÙ. ðÏÍÎÉÔÅ,\n"
-"ÞÔÏ ÚÁÐÕÓËÁÔØ ÎÅËÏÔÏÒÙÅ ÓÅÒ×ÉÓÙ ÎÁ ÓÅÒ×ÅÒÅ ÎÅÂÅÚÏÐÁÓÎÏ..\n"
-"÷ ÏÓÎÏ×ÎÏÍ, ÖÅÌÁÔÅÌØÎÏ ×ÙÂÉÒÁÔØ ÔÏÌØËÏ ÔÅ ÓÅÒ×ÉÓÙ, ËÏÔÏÒÙÅ ×ÁÍ ÒÅÁÌØÎÏ ÎÕÖÎÙ."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux ÏÔÓÞÉÔÙ×ÁÅÔ ×ÒÅÍÑ × GMT (ÐÏ çÒÉÎ×ÉÞÕ) É ÐÅÒÅ×ÏÄÉÔ ÅÇÏ × ÍÅÓÔÎÏÅ\n"
-"×ÒÅÍÑ × ÓÏÏÔ×ÅÔÓÔ×ÉÉ Ó ×ÙÂÒÁÎÎÙÍ ÞÁÓÏ×ÙÍ ÐÏÑÓÏÍ."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-#, fuzzy
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"÷ ÜÔÏÍ ÐÕÎËÔÅ ×ÁÍ ÎÕÖÎÏ ×ÙÂÒÁÔØ ÍÅÓÔÏ ÎÁ ×ÁÛÅÍ ÖÅÓÔËÏÍ ÄÉÓËÅ\n"
-"× ËÏÔÏÒÏÅ ×Ù ÂÕÄÅÔÅ ÕÓÔÁÎÁ×ÌÉ×ÁÔØ Mandrake Linux. åÓÌÉ ÏÎ ÐÕÓÔ ÉÌÉ\n"
-"ÓÕÝÅÓÔ×ÕÀÝÁÑ ÏÐÅÒÁÃÉÏÎÎÁÑ ÓÉÓÔÅÍÁ ÚÁÎÉÍÁÅÔ ×ÓÅ ÄÏÓÔÕÐÎÏÅ ÍÅÓÔÏ, ×ÁÍ "
-"ÐÏÔÒÅÂÕÅÔÓÑ\n"
-"ÒÁÚÂÉÔØ ÄÉÓË ÎÁ ÒÁÚÄÅÌÙ. ðÏ ÓÕÔÉ ÒÁÚÂÉÅÎÉÅ ÎÁ ÒÁÚÄÅÌÙ ÚÁËÌÀÞÁÅÔÓÑ × "
-"ÌÏÇÉÞÅÓËÏÍ\n"
-"ÒÁÚÄÅÌÅÎÉÉ ÄÉÓËÏ×ÏÇÏ ÐÒÏÓÔÒÁÎÓÔ×Á É ÓÏÚÄÁÎÉÅ ÍÅÓÔÁ ÄÌÑ ÕÓÔÁÎÏ×ËÉ Mandrake "
-"Linux.\n"
-"\n"
-"\n"
-"ðÏÓËÏÌØËÕ ÐÏÓÌÅ ÒÁÚÂÉÅÎÉÑ ÏÂÙÞÎÏ ÎÅÌØÚÑ ×ÙÐÏÌÎÉÔØ ÏÂÒÁÔÎÕÀ ÐÒÏÃÅÄÕÒÕ,\n"
-"ÒÁÚÂÉÅÎÉÅ ÍÏÖÅÔ ÏËÁÚÁÔØÓÑ ÎÅÐÏÎÑÔÎÙÍ É ÔÒÕÄÎÙÍ, ÅÓÌÉ Õ ×ÁÓ ÎÅÄÏÓÔÁÔÏÞÎÏ "
-"ÏÐÙÔÁ.\n"
-"üÔÏÔ ÍÁÓÔÅÒ ÕÐÒÏÝÁÅÔ ÐÒÏÃÅÓÓ ÒÁÚÂÉÅÎÉÑ. ðÒÅÖÄÅ ÞÅÍ ÎÁÞÁÔØ, ÉÚÕÞÉÔÅ "
-"ÒÕËÏ×ÏÄÓÔ×Ï\n"
-"É ÚÁÐÁÓÉÔÅÓØ ×ÒÅÍÅÎÅÍ.\n"
-"\n"
-"\n"
-"÷ÁÍ ÎÕÖÎÏ ÎÅ ÍÅÎÅÅ Ä×ÕÈ ÒÁÚÄÅÌÏ×. ïÄÉÎ - ÓÏÂÓÔ×ÅÎÎÏ ÄÌÑ ÏÐÅÒÁÃÉÏÎÎÏÊ ÓÉÓÔÅÍÙ "
-"É ×ÔÏÒÏÊ\n"
-"ÄÌÑ ×ÉÒÔÕÁÌØÎÏÊ ÐÁÍÑÔÉ (ÎÁÚÙ×ÁÅÍÏÊ ÔÁËÖÅ ÆÁÊÌÏÍ ÐÏÄËÁÞËÉ - Swap).\n"
-"\n"
-"\n"
-"åÓÌÉ ÒÁÚÄÅÌÙ ÕÖÅ ÓÄÅÌÁÎÙ (ÉÚ ÐÒÅÄÙÄÕÝÅÊ ÕÓÔÁÎÏ×ËÉ ÉÌÉ ÄÒÕÇÏÊ\n"
-"ÐÒÏÇÒÁÍÍÏÊ ÒÁÚÂÉÅÎÉÑ), ÔÏÇÄÁ ×ÁÍ ÐÒÏÓÔÏ ÎÕÖÎÏ ÉÈ ×ÙÂÒÁÔØ ÄÌÑ ÕÓÔÁÎÏ×ËÉ "
-"×ÁÛÅÊ\n"
-"Linux ÓÉÓÔÅÍÙ.\n"
-"\n"
-"\n"
-"åÓÌÉ ÒÁÚÄÅÌÙ ÅÝÅ ÎÅ ÓÄÅÌÁÎÙ, ×ÁÍ ÐÏÔÒÅÂÕÅÔÓÑ ÉÈ ÓÏÚÄÁÔØ. \n"
-"þÔÏÂÙ ÜÔÏ ÓÄÅÌÁÔØ, ÉÓÐÏÌØÚÕÊÔÅ ×ÙÛÅÕËÁÚÁÎÎÙÊ ÍÁÓÔÅÒ. ÷ ÚÁ×ÉÓÉÍÏÓÔÉ ÏÔ "
-"ËÏÎÆÉÇÕÒÁÃÉÉ ×ÁÛÅÇÏ ÖÅÓÔËÏÇÏ \n"
-"ÄÉÓËÁ, ×ÏÚÍÏÖÎÙ ÎÅÓËÏÌØËÏ ÒÅÛÅÎÉÊ:\n"
-"\n"
-"* éÓÐÏÌØÚÏ×ÁÔØ ÓÕÝÅÓÔ×ÕÀÝÅÅ ÒÁÚÂÉÅÎÉÅ: ÍÁÓÔÅÒ ÏÂÎÁÒÕÖÉÌ ÏÄÉÎ ÉÌÉ ÎÅÓËÏÌØËÏ "
-"ÓÕÝÅÓÔ×ÕÀÝÉÈ ÒÁÚÄÅÌÏ× Linux ÎÁ ×ÁÛÅÍ ÖÅÓÔËÏÍ ÄÉÓËÅ. ÷ÙÂÅÒÉÔÅ\n"
-"  ÜÔÏÔ ÐÕÎËÔ, ÅÓÌÉ ×Ù ÈÏÔÉÔÅ ÉÈ ÉÓÐÏÌØÚÏ×ÁÔØ. \n"
-"\n"
-"\n"
-"* ïÞÉÓÔÉÔØ ×ÅÓØ ÄÉÓË: ×ÙÂÅÒÉÔÅ ÜÔÏÔ ÐÕÎËÔ, ÅÓÌÉ ×Ù ÈÏÔÉÔÅ ÕÄÁÌÉÔØ ×ÓÀ "
-"ÉÎÆÏÒÍÁÃÉÀ É ×ÓÅ ÒÁÚÄÅÌÙ, ÓÕÝÅÓÔ×ÕÀÝÉÅ ÎÁ ×ÁÛÅÍ ÖÅÓÔËÏÍ ÄÉÓËÅ É ÚÁÍÅÎÉÔØ "
-"ÉÈ \n"
-"  ×ÁÛÅÊ ÎÏ×ÏÊ Mandrake Linux ÓÉÓÔÅÍÏÊ. âÕÄØÔÅ ÏÓÔÏÒÏÖÎÙ ÐÒÉÎÉÍÁÑ ÔÁËÏÅ "
-"ÒÅÛÅÎÉÅ - ×ÏÓÓÔÁÎÏ×ÉÔØ ÄÁÎÎÙÅ ÐÏÓÌÅ ÐÏÔÄ×ÅÒÖÄÅÎÉÑ ×ÙÐÏÌÎÅÎÉÑ ÜÔÏÊ ÏÐÅÒÁÃÉÉ\n"
-"  ×Ù ÕÖÅ ÎÅ ÓÍÏÖÅÔÅ.\n"
-"\n"
-"\n"
-"* éÓÐÏÌØÚÏ×ÁÔØ Ó×ÏÂÏÄÎÏÅ ÍÅÓÔÏ × ÒÁÚÄÅÌÅ Windows: ÅÓÌÉ Õ ×ÁÓ ÕÓÔÁÎÏ×ÌÅÎÁ "
-"Microsoft Windows É ÚÁÎÉÍÁÅÔ ×ÓÅ ÍÅÓÔÏ ÎÁ ÖÅÓÔËÏÍ ÄÉÓËÅ, ÔÏ ×ÁÍ ÐÒÉÄÅÔÓÑ\n"
-"  ÓÏÚÄÁÔØ Ó×ÏÂÏÄÎÏÅ ÐÒÏÓÔÒÁÎÓÔ×Ï ÄÌÑ Linux. þÔÏÂÙ ÜÔÏ ÓÄÅÌÁÔØ, ×Ù ÍÏÖÅÔÅ "
-"ÕÄÁÌÉÔØ ×ÁÛ\n"
-"  ÒÁÚÄÅÌ Microsoft Windows É ×ÓÅ ÄÁÎÎÙÅ (ÓÍÏÔÒÉÔÅ ÐÕÎËÔÙ \"ïÞÉÓÔÉÔØ ×ÅÓØ ÄÉÓË"
-"\" ÉÌÉ \"òÅÖÉÍ üËÓÐÅÒÔ\" ) ÉÌÉ ÉÚÍÅÎÉÔØ ÒÁÚÍÅÒ\n"
-"  ×ÁÛÅÇÏ ÒÁÚÄÅÌÁ Microsoft Windows. üÔÏ ÉÚÍÅÎÅÎÉÅ ÍÏÖÅÔ ÂÙÔØ ×ÙÐÏÌÎÅÎÏ ÂÅÚ "
-"ÐÏÔÅÒÉ ÄÁÎÎÙÈ. üÔÏ ÒÅÛÅÎÉÅ ÒÅËÏÍÅÎÄÕÅÔÓÑ\n"
-"  ÅÓÌÉ ×ÙÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ É Mandrake Linux É Microsoft Windows ÎÁ ÏÄÎÏÍ É "
-"ÔÏÍ ÖÅ ËÏÍÐØÀÔÅÒÅ.\n"
-"\n"
-"\n"
-"  ðÅÒÅÄ ×ÙÂÏÒÏÍ ÜÔÏÇÏ ×ÁÒÉÁÎÔÁ, ×ÁÍ ÎÕÖÎÏ ÐÏÎÑÔØ, ÞÔÏ ÒÁÚÍÅÒ ÒÁÚÄÅÌÁ "
-"Microsoft\n"
-"  Windows ÂÕÄÅÔ ÍÅÎØÛÅ, ÞÅÍ ÓÕÝÅÓÔ×ÕÀÝÉÊ. üÔÏ ÏÚÎÁÞÁÅÔ, ÞÔÏ Õ ×ÁÓ ÂÕÄÅÔ "
-"ÍÅÎØÛÅ ÍÅÓÔÁ ÐÏÄ \n"
-"  Microsoft Windows ÄÌÑ ÈÒÁÎÅÎÉÑ ÉÎÆÏÒÍÁÃÉÉ É ÕÓÔÁÎÏ×ËÉ ÎÏ×ÙÈ ÐÒÏÇÒÁÍÍ.\n"
-"\n"
-"\n"
-"* òÅÖÉÍ üËÓÐÅÒÔ: ×ÙÂÅÒÉÔÅ ÜÔÏÔ ×ÁÒÉÁÎÔ, ÅÓÌÉ ×Ù ÈÏÔÉÔÅ ×ÒÕÞÎÕÀ ÒÁÚÂÉÔØ ×ÁÛ "
-"ÖÅÓÔËÉÊ ÄÉÓË. âÕÄØÔÅ ÏÓÔÏÒÏÖÎÙ\n"
-"  . üÔÏÔ ×ÁÒÉÁÎÔ ÏÞÅÎØ ÍÏÝÎÙÊ, ÎÏ ÏÞÅÎØ ÏÐÁÓÎÙÊ. ÷Ù ÍÏÖÅÔÅ ÌÅÇËÏ ÐÏÔÅÒÑÔØ "
-"×ÓÅ ×ÁÛÉ ÄÁÎÎÙÅ. ðÏÜÔÏÍÕ\n"
-"  ÎÅ ×ÙÂÉÒÁÊÔÅ ÜÔÏÔ ×ÁÒÉÁÎÔ, ÅÓÌÉ ×Ù ÎÅ Õ×ÅÒÅÎÙ × ÔÏÍ, ÞÔÏ ÄÅÌÁÅÔÅ."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"þÔÏÂÙ ÉÓÐÏÌØÚÏ×ÁÔØ ×ÓÅ ÚÁÄÁÎÎÙÅ ÒÁÚÄÅÌÙ, ËÏÔÏÒÙÅ ÂÙÌÉ ÚÁÎÏ×Ï ÏÐÒÅÄÅÌÅÎÙ, "
-"ÏÎÉ \n"
-"ÄÏÌÖÎÙ ÂÙÔØ ÏÔÆÏÒÍÁÔÉÒÏ×ÁÎÙ (ÆÏÒÍÁÔÉÒÏ×ÁÎÉÅ ÏÚÎÁÞÁÅÔ ÓÏÚÄÁÎÉÅ ÆÁÊÌÏ×ÏÊ "
-"ÓÉÓÔÅÍÙ).\n"
-"\n"
-"\n"
-"÷ ÄÁÎÎÙÊ ÍÏÍÅÎÔ ×Ù ÍÏÖÅÔÅ ÐÅÒÅÆÏÒÍÁÔÉÒÏ×ÁÔØ É ÕÖÅ ÓÕÝÅÓÔ×ÕÀÝÉÅ ÒÁÚÄÅÌÙ ÞÔÏÂÙ "
-"ÓÔÅÒÅÔØ\n"
-"ÓÏÄÅÒÖÁÝÕÀÓÑ ÎÁ ÎÉÈ ÉÎÆÏÒÍÁÃÉÀ. åÓÌÉ ×Ù ÈÏÔÉÔÅ ÜÔÏ ÓÄÅÌÁÔØ, ×ÙÂÅÒÉÔÅ ÔÁËÖÅ "
-"ÒÁÚÄÅÌÙ,\n"
-"ËÏÔÏÒÙÅ ×Ù ÈÏÔÉÔÅ ÏÔÆÏÒÍÁÔÉÒÏ×ÁÔØ.\n"
-"\n"
-"\n"
-"éÍÅÊÔÅ ××ÉÄÕ, ÞÔÏ ÎÅÏÂÑÚÁÔÅÌØÎÏ ÐÅÒÅÆÏÒÍÁÔÉÒÏ×ÁÔØ ×ÓÅ ÒÁÎÅÅ ÓÕÝÅÓÔ×ÕÀÝÉÅ "
-"ÒÁÚÄÅÌÙ.\n"
-"÷Ù ÄÏÌÖÎÙ ÐÅÒÅÆÏÒÍÁÔÉÒÏ×ÁÔØ ÒÁÚÄÅÌÙ, ÓÏÄÅÒÖÁÝÉÅ ÏÐÅÒÁÃÉÏÎÎÕÀ ÓÉÓÔÅÍÕ (ÔÁËÉÅ "
-"ËÁË \"/\",\n"
-"\"/usr\" ÉÌÉ \"/var\"), ÎÏ ×ÁÍ ÎÅÏÂÑÚÁÔÅÌØÎÏ ÜÔ ÏÄÅÌÁÔØ ÄÌÑ ÒÁÚÄÅÌÏ×, "
-"ÓÏÄÅÒÖÁÝÉÈ  ÉÎÆÏÒÍÁÃÉÀ,\n"
-"ËÏÔÏÒÕÀ ×Ù ÈÏÔÉÔÅ ÓÏÈÒÁÎÉÔØ (ÏÂÙÞÎÏ ÜÔÏ ÒÁÚÄÅÌ /home).\n"
-"\n"
-"\n"
-"âÕÄØÔÅ ÏÓÔÏÒÏÖÎÙ ÐÒÉ ×ÙÂÏÒÅ ÒÁÚÄÅÌÏ×, ÔÁË ËÁË ÐÏÓÌÅ ÆÏÒÍÁÔÉÒÏ×ÁÎÉÑ ×ÓÑ "
-"ÉÎÆÏÒÍÁÃÉÑ ÂÕÄÅÔ\n"
-"ÕÄÁÌÅÎÁ ÂÅÚ ×ÏÚÍÏÖÎÏÓÔÉ ×ÏÓÓÔÁÎÏ×ÌÅÎÉÑ.\n"
-"\n"
-"\n"
-"îÁÖÍÉÔÅ ÎÁ \"OK\" ÄÌÑ ÆÏÒÍÁÔÉÒÏ×ÁÎÉÑ ÒÁÚÄÅÌÏ×.\n"
-"\n"
-"\n"
-"îÁÖÍÉÔÅ ÎÁ \"ïÔÍÅÎÁ\", ÅÓÌÉ ×Ù ÈÏÔÉÔÅ ×ÙÂÒÁÔØ ÄÒÕÇÉÅ ÒÁÚÄÅÌÙ ÄÌÑ ÕÓÔÁÎÏ×ËÉ \n"
-"Mandrake Linux."
-
-#: ../../help.pm_.c:376
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"÷ ÄÁÎÎÙÊ ÍÏÍÅÎÔ ÏÓÕÝÅÓÔ×ÌÑÅÔÓÑ ÕÓÔÁÎÏ×ËÁ ÷ÁÛÅÊ ÎÏ×ÏÊ ÏÐÅÒÁÃÉÏÎÎÏÊ ÓÉÓÔÅÍÙ "
-"Mandrake Linux\n"
-". üÔÁ ÏÐÅÒÁÃÉÑ ÚÁÊÍÅÔ ÎÅÓËÏÌØËÏ ÍÉÎÕÔ (×ÒÅÍÑ ÚÁ×ÉÓÉÔ ÏÔ ×ÙÂÒÁÎÎÏÇÏ ÒÁÚÍÅÒÁ "
-"ÕÓÔÁÎÏ×ËÉ\n"
-"É ÓËÏÒÏÓÔÉ ×ÁÛÅÇÏ ËÏÍÐØÀÔÅÒÁ).\n"
-"\n"
-"\n"
-"ÐÏÖÁÌÕÊÓÔÁ, ÐÏÄÏÖÄÉÔÅ."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-#, fuzzy
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"÷ ÜÔÏÍ ÐÕÎËÔÅ ×ÁÍ ÎÕÖÎÏ ×ÙÂÒÁÔØ, ËÁËÉÅ ÒÁÚÄÅÌ(Ù) \n"
-"ÉÓÐÏÌØÚÏ×ÁÔØ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ×ÁÛÅÊ ÎÏ×ÏÊ Mandrake Linux ÓÉÓÔÅÍÙ. åÓÌÉ ÒÁÚÄÅÌÙ\n"
-"ÕÖÅ ÓÏÚÄÁÎÙ (×Ï ×ÒÅÍÑ ÐÒÅÄÙÄÕÝÅÊ ÕÓÔÁÎÏ×ËÉ GNU/Linux ÉÌÉ ÄÒÕÇÏÊ\n"
-"ÐÒÏÇÒÁÍÍÏÊ ÒÁÚÂÉÅÎÉÑ), ×Ù ÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÓÕÝÅÓÔ×ÕÀÝÉÅ ÒÁÚÄÅÌÙ. ÷Ï ×ÓÅÈ "
-"ÄÒÕÇÉÈ ÓÌÕÞÁÑÈ,\n"
-"ÒÁÚÄÅÌÙ ÖÅÓÔËÏÇÏ ÄÉÓËÁ ÄÏÌÖÎÙ ÂÙÔØ ÚÁÄÁÎÙ.\n"
-"\n"
-"\n"
-"þÔÏÂÙ ÓÏÚÄÁÔØ ÒÁÚÄÅÌÙ, ÓÎÁÞÁÌÁ ×ÁÍ ÎÕÖÎÏ ×ÙÂÒÁÔØ ÖÅÓÔËÉÊ ÄÉÓË. ÷ÙÂÒÁÔØ ÄÉÓË "
-"ÄÌÑ \n"
-"ÒÁÚÂÉÅÎÉÑ ×Ù ÍÏÖÅÔÅ, ÎÁÖÁ× \"hda\" ÄÌÑ ÄÉÓËÁ ÎÁ ÐÅÒ×ÏÍ IDE ËÁÎÁÌÅ, \"hdb\" "
-"ÄÌÑ ÄÉÓËÁ\n"
-"ÎÁ ×ÔÏÒÏÍ IDE ËÁÎÁÌÅ, ÌÉÂÏ \"sda\" ÄÌÑ ÐÅÒ×ÏÇÏ SCSI ÄÉÓËÁ É ÔÁË ÄÁÌÅÅ.\n"
-"\n"
-"\n"
-"äÌÑ ÒÁÚÂÉÅÎÉÑ ×ÙÂÒÁÎÎÏÇÏ ÖÅÓÔËÏÇÏ ÄÉÓËÁ, ×Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ×ÁÒÉÁÎÔÙ:\n"
-"\n"
-"   * ïÞÉÓÔÉÔØ ×ÓÅ: ÜÔÏÔ ×ÁÒÉÁÎÔ ÕÄÁÌÑÅÔ ×ÓÅ ÒÁÚÄÅÌÙ, ÓÕÝÅÓÔ×ÕÀÝÉÅ ÎÁ "
-"×ÙÂÒÁÎÎÏÍ ÖÅÓÔËÏÍ ÄÉÓËÅ.\n"
-"\n"
-"\n"
-"   * á×ÔÏÍÁÔÉÞÅÓËÏÅ ÒÁÚÍÅÝÅÎÉÅ: ÜÔÏ ×ÁÒÉÁÎÔ ÐÏÚ×ÏÌÑÅÔ Á×ÔÏÍÁÔÉÞÅÓËÉ ÓÏÚÄÁÔØ "
-"ÒÁÚÄÅÌÙ Ext2 É ÐÏÄËÁÞËÉ (swap) × Ó×ÏÂÏÄÎÏÍ (ÎÅÒÁÚÂÉÔÏÍ) ÐÒÏÓÔÒÁÎÓÔ×Å "
-"×ÁÛÅÇÏ \n"
-"     ÖÅÓÔËÏÇÏ ÄÉÓËÁ.\n"
-"\n"
-"\n"
-"   * ÷ÏÓÓÔÁÎÏ×ÉÔØ ÔÁÂÌÉÃÕ ÒÁÚÄÅÌÏ×: × ÜÔÏÍ ÐÕÎËÔÅ ×Ù ÍÏÖÅÔÅ ÐÏÐÙÔÁÔØÓÑ "
-"×ÏÓÓÔÁÎÏ×ÉÔØ ×ÁÛÕ  ÔÁÂÌÉÃÁ ÒÁÚÄÅÌÏ×, ÅÓÌÉ ÏÎÁ ÐÏ×ÒÅÖÄÅÎÁ. âÕÄØÔÅ\n"
-"     ÏÓÔÏÒÏÖÎÙ É ÐÏÍÎÉÔÅ, ÞÔÏ ÐÏÐÙÔËÁ ÍÏÖÅÔ ÚÁËÏÎÞÉÔØÓÑ ÎÅÕÄÁÞÎÏ.\n"
-"\n"
-"\n"
-"   * ïÔËÁÔ: ÜÔÏÔ ÐÕÎËÔ ×Ù ÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÄÌÑ ÏÔÍÅÎÙ ÓÄÅÌÁÎÎÙÈ ×ÁÍÉ "
-"ÉÚÍÅÎÅÎÉÊ.\n"
-"\n"
-"\n"
-"   * ðÅÒÅÚÁÇÒÕÚÉÔØ: ÜÔÏÔ ÐÕÎËÔ ×Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ÄÌÑ ÏÔÍÅÎÙ ×ÓÅÈ ÉÚÍÅÎÅÎÉÊ É "
-"ÚÁÇÒÕÚËÉ ×ÁÛÅÊ ÉÓÈÏÄÎÏÊ (ÐÅÒ×ÏÎÁÞÁÌØÎÏÊ) ÔÁÂÌÉÃÙ ÒÁÚÄÅÌÏ×\n"
-"\n"
-"\n"
-"   * íÁÓÔÅÒ: ×ÙÂÅÒÉÔÅ ÜÔÏÔ ÐÕÎËÔ, ÅÓÌÉ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÐÒÏÇÒÁÍÍÕ-"
-"ÍÁÓÔÅÒ ÄÌÑ ÒÁÚÂÉÅÎÉÑ ×ÁÛÅÇÏ ÖÅÓÔËÏÇÏ ÄÉÓËÁ. òÅËÏÍÅÎÄÕÅÔÓÑ, ÅÓÌÉ Õ ×ÁÓ\n"
-"     ÎÅÂÏÌØÛÏÊ ÏÐÙÔ × ÒÁÚÂÉÅÎÉÉ ÄÉÓËÏ× ÎÁ ÒÁÚÄÅÌÙ.\n"
-"\n"
-"\n"
-"   * ÷ÏÓÓÔÁÎÏ×ÉÔØÓÑ Ó ÄÉÓËÅÔÙ: ×ÙÂÒÁ× ÜÔÏÔ ÐÕÎËÔ, ×Ù ÍÏÖÅÔÅ ×ÏÓÓÔÁÎÏ×ÉÔØ "
-"ÔÁÂÌÉÃÕ ÒÁÚÄÅÌÏ×, ÅÓÌÉ ×Ù ÅÅ ÓÏÈÒÁÎÑÌÉ ×Ï ×ÒÅÍÑ\n"
-"     ÐÅÒÄÙÄÕÝÅÊ ÕÓÔÁÎÏ×ËÉ.\n"
-"\n"
-"\n"
-"   * óÏÈÒÁÎÉÔØ ÎÁ ÄÉÓËÅÔÕ: ×ÙÂÅÒÉÔÅ ÜÔÏÔ ÐÕÎËÔ, ÞÔÏÂÙ ÓÏÈÒÁÎÉÔØ ÔÁÂÌÉÃÕ "
-"ÒÁÚÄÅÌÏ× ÎÁ ÄÉÓËÅÔÕ. üÔÏ ÄÁÓÔ  ×ÁÍ ×ÏÚÍÏÖÎÏÓÔØ ×ÏÓÓÔÁÎÏ×ÉÔØ ÅÅ ÐÏÚÖÅ\n"
-"     . îÁÓÔÏÑÔÅÌØÎÏ ÒÅËÏÍÅÎÄÕÅÔÓÑ ÉÓÐÏÌØÚÏ×ÁÔØ ÜÔÏÔ ÐÕÎËÔ\n"
-"\n"
-"\n"
-"   * ÷ÙÐÏÌÎÅÎÏ: ×ÙÂÅÒÉÔÅ ÜÔÏÔ ÐÕÎËÔ, ËÏÇÄÁ ×Ù ÚÁËÏÎÞÉÔÅ ÒÁÚÂÉÅÎÉÅ drive, "
-"ÞÔÏÂÙ ÓÏÈÒÁÎÉÔØ ÓÄÅÌÁÎÎÙÅ ÉÚÍÅÎÅÎÉÑ.\n"
-"\n"
-"\n"
-"÷Ù ÍÏÖÅÔÅ ÐÅÒÅÊÔÉ Ë ×ÙÂÏÒÕ ÌÀÂÏÇÏ ÐÕÎËÔÁ Ó ËÌÁ×ÉÁÔÕÒÙ: ÐÅÒÅÈÏÄ ÍÅÖÄÕ "
-"ÒÁÚÄÅÌÁÍÉ ÏÓÕÝÅÓÔ×ÌÑÅÔÓÑ Ó ÐÏÍÏÝØÀ ËÌÁ×ÉÛ  Tab É ÓÔÒÅÌÏË ÷×ÅÒÈ/÷ÎÉÚ.\n"
-"\n"
-"\n"
-"ëÏÇÄÁ ÒÁÚÄÅÌ ×ÙÂÒÁÎ, ÷Ù ÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ:\n"
-"\n"
-"           * Ctrl-c ÄÌÑ ÓÏÚÄÁÎÉÑ ÎÏ×ÏÇÏ ÒÁÚÄÅÌÁ (ËÏÇÄÁ ×ÙÂÒÁÎ ÐÕÓÔÏÊ "
-"ÒÁÚÄÅÌ)\n"
-"\n"
-"           * Ctrl-d ÄÌÑ ÕÄÁÌÅÎÉÑ ÒÁÚÄÅÌÁ\n"
-"\n"
-"           * Ctrl-m ÄÌÑ ÚÁÄÁÎÉÑ ÔÏÞËÉ ÍÏÎÔÉÒÏ×ÁÎÉÑ\n"
-"           \n"
-"\n"
-"           \n"
-"åÓÌÉ ×Ù ×ÙÐÏÌÎÑÅÔÅ ÕÓÔÁÎÏ×ËÕ ÎÁ ËÏÍÐØÀÔÅÒÅ PPC, ×ÏÚÍÏÖÎÏ, ×Ù ÚÁÈÏÔÉÔÅ "
-"ÓÏÚÄÁÔØ ÎÅÂÏÌØÛÏÊ HFS 'bootstrap' ÒÁÚÄÅÌ ÎÅ ÍÅÎÅÅ 1MB ÄÌÑ ÉÓÐÏÌØÚÏ×ÁÎÉÑ ÅÇÏ\n"
-"ÎÁÞÁÌØÎÙÍ ÚÁÇÒÕÚÞÉËÏÍ yaboot. åÓÌÉ ×Ù ÒÅÛÉÔÅ ÓÄÅÌÁÔØ ÒÁÚÄÅÌ ÎÅÍÎÏÇÏ ÂÏÌØÛÅ, "
-"ÎÁÐÒÉÍÅÒ 50MB, ×Ù ÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÜÔÏ ÍÅÓÔÏ ÄÌÑ \n"
-"ÈÒÁÎÅÎÉÑ ÑÄÒÁ É ÏÂÒÁÚÁ ramdisk ÄÌÑ ÓÌÕÞÁÅ× Á×ÁÒÉÊÎÏÊ ÚÁÇÒÕÚËÉ."
-
-#: ../../help.pm_.c:460
-#, fuzzy
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"îÁ ÷ÁÛÅÍ ÖÅÓÔËÏÍ ÄÉÓËÅ ÏÂÎÁÒÕÖÅÎÏ ÂÏÌÅÅ ÏÄÎÏÇÏ ÒÁÚÄÅÌÁ Microsoft Windows\n"
-". ÷ÙÂÅÒÉÔÅ ÒÁÚÄÅÌ, ÒÁÚÍÅÒ ËÏÔÏÒÏÇÏ ÷Ù ÈÏÔÉÔÅ ÉÚÍÅÎÉÔØ ÄÌÑ ÕÓÔÁÎÏ×ËÉ\n"
-"÷ÁÛÅÊ ÎÏ×ÏÊ ÏÐÅÒÁÃÉÏÎÎÏÊ ÓÉÓÔÅÍÙ Mandrake Linux.\n"
-"\n"
-"\n"
-"äÌÑ ÓÐÒÁ×ËÉ - ËÁÖÄÙÊ ÒÁÚÄÅÌ ÏÐÉÓÙ×ÁÅÔÓÑ ÓÌÅÄÕÀÝÉÍ ÏÂÒÁÚÏÍ: \"ÉÍÑ Linux\", "
-"\"ÉÍÑ\n"
-"Windows\" \"åÍËÏÓÔØ\".\n"
-"\n"
-"\"ÉÍÑ Linux\" ÏÐÉÓÙ×ÁÅÔÓÑ ÓÌÅÄÕÀÝÉÍ ÏÂÒÁÚÏÍ: \"ÔÉÐ ÖÅÓÔËÏÇÏ ÄÉÓËÁ\", \"ÎÏÍÅÒ "
-"ÖÅÓÔËÏÇÏ ÄÉÓËÁ\",\n"
-"\"ÎÏÍÅÒ ÒÁÚÄÅÌÁ\" (ÎÁÐÒÉÍÅÒ, \"hda1\").\n"
-"\n"
-"\n"
-"\"ôÉÐ ÖÅÓÔËÏÇÏ ÄÉÓËÁ\" - \"hd\", ÅÓÌÉ Õ ×ÁÓ ÖÅÓÔËÉÊ ÄÉÓË Ó IDE ÉÎÔÅÒÆÅÊÓÏÍ É "
-"- \"sd\"\n"
-"ÅÓÌÉ ÜÔÏ SCSI ÄÉÓË.\n"
-"\n"
-"\n"
-"\"îÏÍÅÒ ÖÅÓÔËÏÇÏ ÄÉÓËÁ\" ÜÔÏ ×ÓÅÇÄÁ ÂÕË×Á ÐÏÓÌÅ \"hd\" or \"sd\". äÌÑ "
-"ÖÅÓÔËÉÈ ÄÉÓËÏ× IDE:\n"
-"\n"
-"   * \"a\" ÏÚÎÁÞÁÅÔ \"master ÄÉÓË ÎÁ ÐÅÒ×ÏÍ IDE ËÏÎÔÒÏÌÌÅÒÅ\",\n"
-"\n"
-"   * \"b\" ÏÚÎÁÞÁÅÔ \"slave ÄÉÓË ÎÁ ÐÅÒ×ÏÍ IDE ËÏÎÔÒÏÌÌÅÒÅ\",\n"
-"\n"
-"   * \"c\" ÏÚÎÁÞÁÅÔ \"master ÄÉÓË ÎÁ ×ÔÏÒÏÍ IDE ËÏÎÔÒÏÌÌÅÒÅ\",\n"
-"\n"
-"   * \"d\" ÏÚÎÁÞÁÅÔ \"slave ÄÉÓË ÎÁ ×ÔÏÒÏÍ IDE ËÏÎÔÒÏÌÌÅÒÅ\".\n"
-"\n"
-"\n"
-"äÌÑ ÖÅÓÔËÉÈ ÄÉÓËÏ× SCSI, \"a\" ÏÚÎÁÞÁÅÔ \"ÐÅÒ×ÙÊ ÄÉÓË\", \"b\" ÏÚÎÁÞÁÅÔ "
-"\"×ÔÏÒÏÊ ÄÉÓË\", É Ô.Ä.\n"
-"\n"
-"\n"
-"\"éÍÑ Windows\" - ÜÔÏ ÂÕË×Á, ÏÂÏÚÎÁÞÁÀÝÁÑ ×ÁÛ ÖÅÓÔËÉÊ ÄÉÓË × Windows (ÐÅÒ×ÙÊ "
-"ÄÉÓË \n"
-"ÉÌÉ ÒÁÚÄÅÌ ÎÁÚÙ×ÁÅÔÓÑ \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "ðÏÄÏÖÄÉÔÅ. ÷ÙÐÏÌÎÅÎÉÅ ÜÔÏÊ ÏÐÅÒÁÃÉÑ ÍÏÖÅÔ ÚÁÎÑÔØ ÎÅÓËÏÌØËÏ ÍÉÎÕÔ."
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ \"õÓÔÁÎÏ×ËÁ\", ÅÓÌÉ Õ ×ÁÓ ÎÅ ÂÙÌÁ ÕÓÔÁÎÏ×ÌÅÎÁ "
-"ÐÒÅÄÙÄÕÝÁÑ ×ÅÒÓÉÑ Mandrake Linux\n"
-"ÉÌÉ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÎÅÓËÏÌØËÏ ÏÐÅÒÁÃÉÏÎÎÙÈ ÓÉÓÔÅÍ.\n"
-"\n"
-"\n"
-"ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ \"ïÂÎÏ×ÌÅÎÉÅ\", ÅÓÌÉ ×Ù ÈÏÔÉÔÅ ÏÂÎÏ×ÉÔØ ÕÖÅ "
-"ÕÓÔÁÎÏ×ÌÅÎÎÕÀ ×ÅÒÓÉÀ  Mandrake Linux.\n"
-"\n"
-"\n"
-"÷ ÚÁ×ÉÓÉÍÏÓÔÉ ÏÔ ×ÁÛÅÇÏ ÏÐÙÔÁ × GNU/Linux, ×Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ÏÄÉÎ ÉÚ "
-"ÓÌÅÄÕÀÝÉÈ ÕÒÏ×ÎÅÊ ÕÓÔÁÎÏ×ËÉ ÉÌÉ ÏÂÎÏ×ÌÅÎÉÑ ×ÁÛÅÊ\n"
-"ÏÐÅÒÁÃÉÏÎÎÎÏÊ ÓÉÓÔÅÍÙ Mandrake Linux:\n"
-"\n"
-"* òÅËÏÍÅÎÄÕÅÍÙÊ: ÅÓÌÉ ×Ù ÒÁÎÅÅ ÎÉËÏÇÄÁ ÎÅ ÕÓÔÁÎÁ×ÌÉ×ÁÌÉ ÏÐÅÒÁÃÉÏÎÎÙÈ ÓÉÓÔÅÍ "
-"GNU/Linux ×ÙÂÅÒÉÔÅ ÜÔÏÔ. õÓÔÁÎÏ×ËÁ ÂÕÄÅÔ\n"
-"  ÏÞÅÎØ ÐÒÏÓÔÏÊ É ×ÁÍ ÂÕÄÅÔ ÚÁÄÁÎÏ ×ÓÅÇÏ ÎÅÓËÏÌØËÏ ×ÏÐÒÏÓÏ×.\n"
-"\n"
-"\n"
-"* ÷ÙÂÏÒÏÞÎÙÊ: ÅÓÌÉ ×Ù ÄÏÓÔÁÔÏÞÎÏ ÚÎÁËÏÍÙ Ó GNU/Linux, ÔÏ ÍÏÖÅÔÅ ×ÙÂÒÁÔØ "
-"ÃÅÌÅ×ÏÅ ÎÁÚÎÁÞÅÎÉÅ (ÒÁÂÏÞÁÑ ÓÔÁÎÃÉÑ, ÓÅÒ×ÅÒ,\n"
-"  ÒÁÚÒÁÂÏÔËÁ ÐÒÏÇÒÁÍÍ) ×ÁÛÅÊ ÓÉÓÔÅÍÙ. ÷ÁÍ ÂÕÄÅÔ ÚÁÄÁÎÏ ÂÏÌØÛÅ ×ÏÐÒÏÓÏ×, ÞÅÍ "
-"× ×ÁÒÉÁÎÔÅ ÕÓÔÁÎÏ×ËÉ \"òÅËÏÍÅÎÄÕÅÔÓÑ\" \n"
-"  ÕÒÏ×ÅÎØ, ÐÏÜÔÏÍÕ ×ÁÍ ÎÕÖÎÏ ÚÎÁÔØ, ËÁË ÒÁÂÏÔÁÅÔ GNU/Linux ÞÔÏÂÙ ×ÙÂÒÁÔØ "
-"ÜÔÏÔ ÕÒÏ×ÅÎØ ÕÓÔÁÎÏ×ËÉ.\n"
-"\n"
-"\n"
-"* üËÓÐÅÒÔ: ÅÓÌÉ ×Ù ÏÂÌÁÄÁÅÔÅ ÈÏÒÏÛÉÍÉ ÚÎÁÎÉÑÍÉ × GNU/Linux, ×Ù ÍÏÖÅÔÅ "
-"×ÙÂÒÁÔØ ÜÔÏÔ ÕÒÏ×ÅÎØ ÕÓÔÁÎÏ×ËÉ. ëÁË É × ÕÒÏ×ÎÅ \"÷ÙÂÏÒÏÞÎÁÑ\",\n"
-"  ×Ù ÓÍÏÖÅÔÅ ×ÙÂÒÁÔØ ÃÅÌÅ×ÏÅ ÎÁÚÎÁÞÅÎÉÅ (ÒÁÂÏÞÁÑ ÓÔÁÎÃÉÑ, ÓÅÒ×ÅÒ, ÒÁÚÒÁÂÏÔËÁ "
-"ÐÒÏÇÒÁÍÍ). âÕÄØÔÅ ÏÞÅÎØ\n"
-"  ÏÓÔÏÒÏÖÎÙ × ×ÙÂÏÒÅ ÜÔÏÇÏ ÕÒÏ×ÎÑ ÕÓÔÁÎÏ×ËÉ. ÷ ÎÅÍ ×Ù ÍÏÖÅÔÅ ÏÓÕÝÅÓÔ×ÉÔØ "
-"ÏÞÅÎØ ÔÏÎËÕÀ ÎÁÓÔÒÏÊËÕ ÐÒÏÃÅÓÓÁ ÕÓÔÁÎÏ×ËÉ.\n"
-"  ïÔ×ÅÔÉÔØ ÎÁ ÎÅËÏÔÏÒÙÅ ×ÏÐÒÏÓÙ, ÎÅ ÏÂÌÁÄÁÑ ÈÏÒÏÛÉÍÉ ÚÎÁÎÉÑÍÉ × GNU/Linux, "
-"ÍÏÖÅÔ ÂÙÔØ ÏÞÅÎØ ÔÒÕÄÎÏ.  ðÏÜÔÏÍÕ ÎÅ ×ÙÂÉÒÁÊÔÅ ÜÔÏÔ ÕÒÏ×ÅÎØ ÕÓÔÁÎÏ×ËÉ,\n"
-" ÅÓÌÉ ×Ù ÎÅ Õ×ÅÒÅÎÙ × ÔÏÍ, ÞÔÏ ÄÅÌÁÅÔÅ."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"÷ÙÅÂÒÉÔÅ ÐÒÁ×ÉÌØÎÙÊ ÐÏÒÔ. îÁÐÒÉÍÅÒ, COM1\n"
-"ÐÏÒÔ × MS Windows ÎÁÚÙ×ÁÅÔÓÑ ttyS0 × GNU/Linux."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader - ÚÁÇÒÕÚÞÉË Linux) É Grub Ñ×ÌÑÀÔÓÑ ÄÉÓÐÅÔÞÅÒÁÍÉ "
-"ÚÁÇÒÕÚËÉ:\n"
-"ÏÎÉ ÓÐÏÓÏÂÎÙ ÚÁÇÒÕÚÉÔØ GNU/Linux ÉÌÉ ÌÀÂÕÀ ÄÒÕÇÕÀ ïó, ÕÓÔÁÎÏ×ÌÅÎÎÕÀ ÎÁ "
-"ÍÁÛÉÎÅ.\n"
-"ïÂÙÞÎÏ ÜÔÉ ÄÒÕÇÉÅ ÏÐÅÒÁÃÉÏÎÎÙÅ ÓÉÓÔÅÍÙ ËÏÒÒÅËÔÎÏ ÒÁÓÐÏÚÎÁÀÔÓÑ É "
-"ÕÓÔÁÎÁ×ÌÉ×ÁÀÔÓÑ.\n"
-"åÓÌÉ ÜÔÏÇÏ ÎÅ ÐÒÏÉÚÏÛÌÏ, ×Ù ÍÏÖÅÔÅ ÄÏÂÁ×ÉÔØ ÐÕÎËÔ ×ÒÕÞÎÕÀ ÎÁ ÜÔÏÍ ÜËÒÁÎÅ.\n"
-"âÕÄØÔÅ ×ÎÉÍÁÔÅÌØÎÙ ÐÒÉ ÚÁÄÁÎÉÉ ÐÁÒÁÍÅÔÒÏ×.\n"
-"\n"
-"\n"
-"÷ÏÚÍÏÖÎÏ ÔÁËÖÅ, ÞÔÏ ×Ù ÎÅ ÈÏÔÉÔÅ ÎÉËÏÍÕ ÄÁ×ÁÔØ ÄÏÓÔÕÐ Ë ÜÔÉÍ ïó, × ÔÁËÏÍ "
-"ÓÌÕÞÁÅ\n"
-"ÍÏÖÎÏ ÕÄÁÌÉÔØ ÓÏÏÔ×ÅÔÓÔ×ÕÀÝÉÅ ÐÕÎËÔÙ. îÏ × ÜÔÏÍ ÓÌÕÞÁÅ ÄÌÑ ÉÈ ÚÁÇÒÕÚËÉ "
-"ÐÏÔÒÅÂÕÅÔÓÑ\n"
-"ÚÁÇÒÕÚÏÞÎÁÑ ÄÉÓËÅÔÁ!"
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"îÁÄÏ ÕËÁÚÁÔØ, ËÕÄÁ ×Ù ÈÏÔÉÔÅ\n"
-"ÐÏÍÅÓÔÉÔØ ÉÎÆÏÒÍÁÃÉÀ, ÎÅÏÂÈÏÄÉÍÕÀ ÄÌÑ ÚÁÇÒÕÚËÉ GNU/Linux.\n"
-"\n"
-"\n"
-"åÓÌÉ ×Ù ÎÅ ÐÏÎÉÍÁÅÔÅ ÁÂÓÏÌÀÔÎÏ ÔÏÞÎÏ ÔÏ, ÞÔÏ ×Ù ÄÅÌÁÅÔÅ, ×ÙÂÉÒÁÊÔÅ\n"
-"\"ðÅÒ×ÙÊ ÓÅËÔÏÒ ÎÁ ÄÉÓËÅ (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX ÐÏÐÒÏÂÕÅÔ ÏÐÒÅÄÅÌÉÔØ PCI SCSI ÁÄÁÐÔÅÒ(Ù). åÓÌÉ DrakX\n"
-"ÓÍÏÖÅÔ ÏÐÒÅÄÅÌÉÔØ SCSI ÁÄÁÐÔÅÒ É Õ ÎÅÇÏ ÂÕÄÅÔ ÓÏÏÔ×ÅÔÓ×ÕÀÝÉÊ ÄÒÁÊ×ÅÒ, ÔÏ ÏÎ "
-"ÂÕÄÅÔ Á×ÔÏÍÁÔÉÞÅÓËÉ \n"
-"ÕÓÔÁÎÏ×ÌÅÎ.\n"
-"\n"
-"\n"
-"åÓÌÉ DrakX ÎÅ ÎÁÊÄÅÔ ÎÉ ÏÄÎÏÇÏ SCSI ÁÄÁÐÔÅÒÁ, ISA SCSI ÁÄÁÐÔÅÒÁ ÉÌÉ PCI SCSI "
-"ÁÄÁÐÔÅÒÁ, \n"
-"ÔÏÇÄÁ ×ÁÍ ÂÕÄÅÔ ÚÁÄÁÎ ×ÏÐÒÏÓ Ï ÎÁÌÉÞÉÉ SCSI ÁÄÁÐÔÅÒÁ × ×ÁÛÅÊ \n"
-"ÓÉÓÔÅÍÅ. åÓÌÉ ÁÄÁÐÔÅÒÏ× ÎÅÔ, ×Ù ÍÏÖÅÔÅ ÎÁÖÁÔØ \"îÅÔ\". åÓÌÉ ×Ù ÎÁÖÍÅÔÅ\n"
-"\"äÁ\", ÔÏ ×ÁÍ ÂÕÄÅÔ ÐÒÅÄÌÏÖÅÎ ÓÐÉÓÏË ÁÄÁÐÔÅÒÏ×, ÉÚ ËÏÔÏÒÙÈ ×Ù ÓÍÏÖÅÔÅ "
-"×ÙÂÒÁÔØ ÉÍÅÎÎÏ ×ÁÛ.\n"
-"\n"
-"\n"
-"\n"
-"åÓÌÉ ×Ù ×ÒÕÞÎÕÀ ÕËÁÖÉÔÅ ×ÁÛ ÁÄÁÐÔÅÒ, DrakX ÓÐÒÏÓÉÔ ×ÁÓ, ÈÏÔÉÔÅ ÌÉ ×Ù \n"
-"ÕËÁÚÁÔØ ÄÌÑ ÎÅÇÏ ÐÁÒÁÍÅÔÒÙ. ÷Ù ÄÏÌÖÎÙ ÐÏÚ×ÏÌÉÔØ DrakX ÏÐÒÅÄÅÌÉÔØ ÎÁÓÔÒÏÊËÉ "
-"ÜÔÏÇÏ \n"
-"ÕÓÔÒÏÊÓÔ×Á. ïÂÙÞÎÏ ÜÔÏ ÒÁÂÏÔÁÅÔ ÈÏÒÏÛÏ.\n"
-"\n"
-"\n"
-"åÓÌÉ ÎÅÔ, ×ÁÍ ÐÉÄÅÔÓÑ ÕËÁÚÁÔØ ÎÁÓÔÒÏÊËÉ ÄÒÁÊ×ÅÒÁ. ðÏÖÁÌÕÊÓÔÁ, ÐÒÏÓÍÏÔÒÉÔÅ "
-"òÕËÏ×ÏÄÓÔ×Ï\n"
-"ðÏÌØÚÏ×ÁÔÅÌÑ (ÇÌÁ×Á 3, ÒÁÚÄÅÌ \"Collective informations on your hardware\") "
-"for hints\n"
-"ÉÌÉ ÎÁÊÄÉÔÅ ÜÔÕ ÉÎÆÏÒÍÁÃÉÀ × ÏÐÉÓÁÎÉÉ ÏÂÏÒÕÄÏ×ÁÎÉÑ × ÄÏËÕÍÅÎÔÁÃÉÉ\n"
-"ÎÁ web ÓÁÊÔÅ ÐÒÏÉÚ×ÏÄÉÔÅÌÑ (ÅÓÌÉ Õ ×ÁÓ ÅÓÔØ ÄÏÓÔÕÐ × ÉÎÔÅÒÎÅÔ) ÉÌÉ "
-"ÐÏÓÍÏÔÒÉÔÅ ÎÁÓÔÒÏÊËÉ × Microsoft Windows\n"
-"(ÅÓÌÉ ÏÎ ÕÓÔÁÎÏ×ÌÅÎ ÎÁ ×ÁÛÅÊ ÓÉÓÔÅÍÅ)."
-
-#: ../../help.pm_.c:720
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"÷Ù ÍÏÖÅÔÅ ÄÏÂÁ×ÉÔØ ÄÏÐÏÌÎÉÔÅÌØÎÙÅ ÚÁÐÉÓÉ ÄÌÑ yaboot, ÌÉÂÏ ÄÌÑ ÄÒÕÇÉÈ "
-"ÏÐÅÒÁÃÉÏÎÎÙÈ ÓÉÓÔÅÍ,\n"
-"ÌÉÂÏ ÄÌÑ ÄÒÕÇÉÈ ÑÄÅÒ, ÌÉÂÏ ÄÌÑ Á×ÁÒÉÊÎÏÇÏ ÚÁÇÒÕÚÏÞÎÏÇÏ ÏÂÒÁÚÁ.\n"
-"\n"
-"\n"
-"äÌÑ ÄÒÕÇÉÈ ïó - ÚÁÐÉÓØ ÓÏÄÅÒÖÉÔ ÔÏÌØËÏ ÍÅÔËÕ É ËÏÒÎÅ×ÏÊ ÒÁÚÄÅÌ.\n"
-"\n"
-"\n"
-"äÌÑ Linux, ×ÏÚÍÏÖÎÙ ÎÅÓËÏÌØËÏ ÐÁÒÁÍÅÔÒÏ×: \n"
-"\n"
-"\n"
-"  - íÅÔËÁ: üÔÏ ÐÒÏÓÔÏ ÉÍÑ, ËÏÔÏÒÏÅ ÂÕÄÅÔ ×Ù×ÏÄÉÔØÓÑ × ÐÒÉÇÌÁÛÅÎÉÉ yaboot ÄÌÑ "
-"×ÙÂÏÒÁ ÜÔÏÇÏ \n"
-"×ÁÒÉÁÎÔÁ ÚÁÇÒÕÚËÉ.\n"
-"\n"
-"\n"
-"  - ïÂÒÁÚ: üÔÏ ÂÕÄÅÔ ÉÍÑ ÚÁÇÒÕÖÁÅÍÏÇÏ ÑÄÒÁ.  ïÂÙÞÎÏ ÜÔÏ vmlinux ÉÌÉ \n"
-"×ÁÒÉÁÎÔ vmlinux ÐÌÀÓ ÒÁÓÛÉÒÅÎÉÅ.\n"
-"\n"
-"\n"
-"  - Root: ëÏÒÎÅ×ÏÅ ÕÓÔÒÏÊÓÔ×Ï ÉÌÉ '/' ÄÌÑ ÕÓÔÁÎÏ×ËÉ Linux.\n"
-"\n"
-"\n"
-"  \n"
-"  - äÏÐÏÌÎÉÔØ: ÷ ÏÂÏÒÕÄÏ×ÁÎÉÉ Apple, ÄÏÐÏÌÎÅÎÉÅ ÑÄÒÁ ÞÁÓÔÏ ÉÓÐÏÌØÚÕÅÔÓÑ "
-"ÞÔÏÂÙ\n"
-"ÏÂÅÓÐÅÞÉÔØ ÚÁÐÕÓË ×ÉÄÅÏ ÐÏÄÓÉÓÔÅÍÙ, ÌÉÂÏ ÄÌÑ ÜÍÕÌÑÃÉÉ ÎÁ ËÌÁ×ÉÁÔÕÒÅ ËÎÏÐÏË "
-"ÍÙÛÉ ÔÁË ËÁË\n"
-"2ÁÑ É 3ÑÑ ËÎÏÐËÁ ÏÔÓÕÔÓ×ÕÀÔ ÎÁ ÏÂÙÞÎÙÈ Apple ÍÙÛÁÈ. ÷ÏÔ ÎÅÓËÏÌØËÏ \n"
-"ÐÒÉÍÅÒÏ×:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: üÔÏÔ ÐÁÒÁÍÅÔÒ ÍÏÖÅÔ ÉÓÐÏÌØÚÏ×ÁÔØÓÑ ÌÉÂÏ ÄÌÑ ÚÁÇÒÕÚËÉ "
-"ÐÅÒ×ÏÎÁÞÁÌØÎÙÈ ÍÏÄÕÌÅÊ ÄÏ ÔÏÇÏ, ËÁË ÚÁÇÒÕÚÏÞÎÏÅ \n"
-"ÕÓÔÒÏÊÓÔ×Ï ÓÔÁÎÅÔ ÄÏÓÔÕÐÎÙÍ, ÌÉÂÏ ÄÌÑ ÚÁÇÒÕÚËÉ ÏÂÒÁÚÁ ramdisk ÐÒÉ ÚÁÇÒÕÚËÅ × "
-"Á×ÁÒÉÊÎÏÊ ÓÉÔÕÁÃÉÉ.\n"
-"\n"
-"\n"
-"  - òÁÚÍÅÒ Initrd: ðÏ ÕÍÏÌÞÁÎÉÀ ÒÁÚÍÅÒ ramdisk ÏÂÙÞÎÏ 4096 ÂÁÊÔ. åÓÌÉ ×ÁÍ "
-"ÐÏÔÒÅÂÕÅÔÓÑ\n"
-"ÒÁÚÍÅÓÔÉÔØ ÂïÌØÛÉÊ ramdisk, ÔÏ ÔÏÇÄÁ ÉÓÐÏÌØÚÕÅÔÓÑ ÜÔÏÔ ÐÁÒÁÍÅÔÒ.\n"
-"\n"
-"\n"
-"  - þÔÅÎÉÅ-ÚÁÐÉÓØ: ÏÂÙÞÎÏ 'ËÏÒÎÅ×ÏÊ' ('root') ÒÁÚÄÅÌ ÐÅÒ×ÏÎÁÞÁÌØÎÏ "
-"ÐÏÄËÌÀÞÁÅÔÓÑ × ÒÅÖÉÍÅ ÔÏÌØËÏ-ÞÔÅÎÉÅ, ÞÔÏÂÙ ÐÏÚ×ÏÌÉÔØ\n"
-"ÐÒÏ×ÅÒËÕ ÆÁÊÌÏ×ÏÊ ÓÉÓÔÅÍÙ ÐÅÒÅÄ ÐÅÒÅÈÏÄÏÍ ÓÉÓÔÅÍÙ × 'ÒÁÂÏÞÅÅ' ÓÏÓÔÏÑÎÉÅ. ÷ "
-"ÜÔÏÍ ÐÁÒÁÍÅÔÒÅ ×Ù ÍÏÖÅÔÅ ÜÔÏ ÉÚÍÅÎÉÔØ.\n"
-"\n"
-"\n"
-"  - NoVideo: åÓÌÉ ÒÁÂÏÔÁ ×ÉÄÅÏ ÐÏÄÓÉÓÔÅÍÙ Apple ÂÕÄÅÔ ÁÂÓÏÌÀÔÎÏ "
-"ÎÅÕÓÔÏÊÞÉ×ÏÊ, ÔÏ ×Ù ÍÏÖÅÔÅ\n"
-"×ÙÂÒÁÔØ ÜÔÏÔ ÐÁÒÁÍÅÔÒ ÄÌÑ ÚÁÇÒÕÚËÉ × ÒÅÖÉÍÅ 'novideo', Ó ÐÏÄÄÅÒÖËÏÊ ÒÏÄÎÏÇÏ "
-"framebuffer .\n"
-"\n"
-"\n"
-"  - ðÏ ÕÍÏÌÞÁÎÉÀ: ÷ÙÂÉÒÁÅÔ ÜÔÏÔ ×ÁÒÉÁÎÔ ËÁË ×ÙÂÏÒ Linux, ÕÓÔÁÎÏ×ÌÅÎÎÙÊ ÐÏ "
-"ÕÍÏÌÞÁÎÉÀ. üÔÏ ×ÙÐÏÌÎÑÅÔÓÑ ÐÒÏÓÔÙÍ\n"
-"ÎÁÖÁÔÉÅÍ ENTER ÎÁ ÐÒÉÇÌÁÛÅÎÉÅ yaboot. üÔÏÔ ×ÁÒÉÁÎÔ ÂÕÄÅÔ ÔÁËÖÅ ×ÙÄÅÌÅÎ "
-"ÓÉÍ×ÏÌÏÍ '*', ÅÓÌÉ ×Ù ÎÁÖÍÅÔÅ\n"
-"TAB ÄÌÑ ÐÒÏÓÔÍÏÔÒÁ ×ÁÒÉÁÎÔÏ× ÚÁÇÒÕÚËÉ."
-
-#: ../../help.pm_.c:765
-#, fuzzy
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot - ÎÁÞÁÌØÎÙÊ ÚÁÇÒÕÚÞÉË ÄÌÑ ÏÂÏÒÕÄÏ×ÁÎÉÑ NewWorld MacIntosh. ïÎ ÍÏÖÅÔ \n"
-"ÚÁÇÒÕÖÁÔØ ÌÉÂÏ GNU/Linux, ÌÉÂÏ MacOS ÉÌÉ MacOSX, ÅÓÌÉ ÏÎÉ ÅÓÔØ ÎÁ ×ÁÛÅÍ "
-"ËÏÍÐØÀÔÅÒÅ.\n"
-"ïÂÙÞÎÏ ÏÐÅÒÁÃÉÏÎÎÙÅ ÓÉÓÔÅÍÙ ÏÐÒÅÄÅÌÑÀÔÓÑ É ÕÓÔÁÎÁ×ÌÉ×ÁÀÔÓÑ ËÏÒÒÅËÔÎÏ.\n"
-"åÓÌÉ ÜÔÏÇÏ ÎÅ ÐÒÏÉÚÏÛÌÏ, ×Ù ÍÏÖÅÔÅ ×ÒÕÞÎÕÀ ÄÏÂÁ×ÉÔØ ÚÁÐÉÓØ\n"
-"× ÜÔÏÍ ÜËÒÁÎÅ. âÕÄØÔÅ ÁËËÕÒÁÔÎÙ ÐÒÉ ×ÙÂÏÒÅ ÐÁÒÁÍÅÔÒÏ×.\n"
-"\n"
-"\n"
-"ïÓÎÏ×ÎÙÅ ÐÁÒÁÍÅÔÒÙ Yaboot:\n"
-"\n"
-"\n"
-"  - éÓÈÏÄÎÏÅ ÓÏÏÂÝÅÎÉÅ: ðÒÏÓÔÏÅ ÔÅÓÔËÏ×ÏÅ ÓÏÏÂÝÅÎÉÅ, ËÏÔÏÒÏÅ ÐÏËÁÚÙ×ÁÅÔÓÑ "
-"ÐÅÒÅÄ ÐÒÉÇÌÁÛÅÎÉÅÍ\n"
-"ÚÁÇÒÕÚÞÉËÁ.\n"
-"\n"
-"\n"
-"  - úÁÇÒÕÚÏÞÎÏÅ ÕÓÔÒÏÊÓÔ×Ï: õËÁÚÙ×ÁÅÔ ÍÅÓÔÏ, × ËÏÔÏÒÏÅ ×Ù ÈÏÔÉÔÅ ÐÏÍÅÓÔÉÔØ "
-"ÉÎÆÏÒÍÁÃÉÀ, ÔÒÅÂÕÀÝÕÀÓÑ ÄÌÑ \n"
-"ÚÁÇÒÕÚËÉ GNU/Linux. ïÂÙÞÎÏ Ë ÜÔÏÍÕ ×Ù ÕÖÅ ÎÁÓÔÒÁÉ×ÁÅÔÅ ÒÁÚÄÅÌ bootstrap, "
-"ÄÌÑ \n"
-"ÈÒÁÎÅÎÉÑ ÜÔÏÊ ÉÎÆÏÍÁÒÃÉÉ.\n"
-"\n"
-"\n"
-"  - úÁÇÒÕÚËÁ ÏÔËÒÙÔÉÑ Firmware: ÷ ÏÔÌÉÞÉÉ ÏÔ LILO, × yaboot ÉÍÅÅÔÓÑ 2 "
-"ÚÁÄÅÒÖËÉ  \n"
-".  ðÅÒ×ÁÑ ÚÁÄÅÒÖËÁ ÉÚÍÅÒÑÅÔÓÑ × ÓÅËÕÎÄÁÈ É ÎÁ ÜÔÏÍ ÜÔÁÐÅ ×Ù ÍÏÖÅÔÅ "
-"×ÙÂÉÒÁÔØ \n"
-"ÍÅÖÄÕ CD, OF ÚÁÇÒÕÚËÏÊ, MacOS ÉÌÉ Linux.\n"
-"\n"
-"\n"
-"  - úÁÄÅÒÖËÁ ÚÁÇÒÕÚËÉ ÑÄÒÁ: üÔÁ ÚÁÄÅÒÖËÁ ÓÈÏÄÎÁ Ó ÚÁÄÅÒÖËÏÊ ÚÁÇÒÕÚËÉ LILO.  "
-"ðÏÓÌÅ \n"
-"×ÙÂÏÒÁ Linux, Õ ×ÁÓ ÂÕÄÅÔ ÚÁÄÅÒÖËÁ × 0.1 ÓÅËÕÎÄÙ, ÐÒÅÖÄÅ ÞÅÍ ×ÁÛÅ\n"
-"ÑÄÒÏ ÐÏ ÕÍÏÌÞÁÎÉÀ ÂÕÄÅÔ ×ÙÂÒÁÎÏ.\n"
-"\n"
-"\n"
-"  - ÷ËÌÀÞÉÔØ ÚÁÇÒÕÚËÕ Ó CD?: ×ÙÂÏÒ ÜÔÏÇÏ ÐÁÒÍÁÅÔÒÁ ÐÏÚ×ÏÌÉÔ ÎÁÖÉÍÁÔØ 'C' ÄÌÑ "
-"ÚÁÇÒÕÚËÉ Ó CD ×\n"
-"ÐÅÒ×ÏÍ ÐÒÉÇÌÁÛÅÎÉÉ ÚÁÇÒÕÚÞÉËÁ.\n"
-"\n"
-"\n"
-"  - ÷ËÌÀÞÉÔØ ÚÁÇÒÕÚËÕ OF?: ×ÙÂÏÒ ÜÔÏÇÏ ÐÁÒÁÍÅÔÒÁ ÐÏÚ×ÏÌÉÔ ×ÁÍ ÎÁÖÉÍÁÔØ 'N' "
-"ÄÌÑ Open\n"
-"Firmware × ÐÅÒ×ÏÍ ÐÒÉÇÌÁÛÅÎÉÉ ÚÁÇÒÕÚÞÉËÁ.\n"
-"\n"
-"\n"
-"  - ïó ÐÏ ÕÍÏÌÞÁÎÉÀ: ÷Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ, ËÁËÁÑ ïó ÂÕÄÅÔ ÚÁÇÒÕÖÁÔØÓÑ ÐÏ "
-"ÕÍÏÌÞÁÎÉÀ ÐÏÓÌÅ ÉÓÔÅÞÅÎÉÑ ×ÒÅÍÅÎÉ ÚÁÄÅÒÖËÉ \n"
-"Firmware."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"÷ÙÂÅÒÉÔÅ ÖÅÓÔËÉÊ ÄÉÓË, ËÏÔÏÒÙÊ ×Ù ÈÏÔÉÔÅ ÏÞÉÓÔÉÔØ ÄÌÑ ÕÓÔÁÎÏ×ËÉ\n"
-"ÎÏ×ÏÇÏ ÒÁÚÄÅÌÁ Mandrake Linux. âÕÄØÔÅ ÏÓÔÏÒÏÖÎÙ, ×ÓÅ ÄÁÎÎÙÅ ÂÕÄÕÔ ÐÏÔÅÒÑÎÙ "
-"ÂÅÚ ×ÏÚÍÏÖÎÏÓÔÉ\n"
-"×ÏÓÓÔÁÎÏ×ÌÅÎÉÑ."
-
-#: ../../help.pm_.c:832
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"îÁÖÍÉÔÅ ÎÁ \"OK\" ÅÓÌÉ ÷Ù ÈÏÔÉÔÅ ÕÄÁÌÉÔØ ×ÓÅ ÄÁÎÎÙÅ É\n"
-"ÒÁÚÄÅÌÙ, ÓÕÝÅÓÔ×ÕÀÝÉÅ ÎÁ ÜÔÏÍ ÖÅÓÔËÏÍ ÄÉÓËÅ. âÕÄØÔÅ ÏÓÔÏÒÏÖÎÙ, ÐÏÓÌÅ ÎÁÖÁÔÉÑ "
-"ÎÁ \"OK\", ÷Ù\n"
-"ÎÅ ÓÍÏÖÅÔÅ ×ÏÓÓÔÁÎÏ×ÉÔØ ÎÉËÁËÕÀ ÉÎÆÏÒÍÁÃÉÀ É ÒÁÚÄÅÌÙ, ÓÕÝÅÓÔ×ÕÀÝÉÅ ÎÁ ÜÔÏÍ "
-"ÖÅÓÔËÏÍ ÄÉÓËÅ,\n"
-"×ËÌÀÞÁÑ ×ÓÀ ÉÎÆÏÒÍÁÃÉÀ Windows.\n"
-"\n"
-"\n"
-"îÁÖÍÉÔÅ ÎÁ \"ïÔÍÅÎÁ\" ÄÌÑ ÏÔÍÅÎÙ ÜÔÏÊ ÏÐÅÒÁÃÉÉ ÂÅÚ ÐÏÔÅÒÉ ÄÁÎÎÙÈ É "
-"ÒÁÚÄÅÌÏ× \n"
-"ÎÁ ÜÔÏÍ ÖÅÓÔËÏÍ ÄÉÓËÅ."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"÷Ù ×ÙÂÒÁÌÉ ÓÌÅÄÕÀÝÉÊ ÓÅÒ×ÅÒ(Á): %s\n"
-"\n"
-"\n"
-"üÔÉ ÓÅÒ×ÅÒÁ ÂÕÄÕÔ ÚÁÐÕÝÅÎÙ ÐÏ ÕÍÏÌÞÁÎÉÀ. ÷ ÎÉÈ ÎÅ ÏÂÎÁÒÕÖÅÎÏ ÐÒÏÂÌÅÍ Ó "
-"ÂÅÚÏÐÁÓÎÏÓÔØÀ\n"
-", ÎÏ, ×ÏÚÍÏÖÎÏ, ÎÅÓËÏÌØËÏ ÎÏ×ÙÈ ÐÒÏÂÌÅÍ ÂÕÄÕÔ ÏÂÎÁÒÕÖÅÎÙ. ÷ ÜÔÏÍ ÓÌÕÞÁÅ ×ÁÍ "
-"ÓÌÅÄÕÅÔ ÏÂÎÏ×ÉÔØ ÉÈ ÎÅÍÅÄÌÅÎÎÏ\n"
-".\n"
-"\n"
-"\n"
-"÷Ù Õ×ÅÒÅÎÙ, ÞÔÏ ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ ÜÔÉ ÓÅÒ×ÅÒÁ?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "îÅ×ÏÚÍÏÖÎÏ ÉÓÐÏÌØÚÏ×ÁÔØ broadcast ÂÅÚ NIS ÄÏÍÅÎÁ"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "÷ÓÔÁ×ØÔÅ ÏÔÆÏÒÍÁÔÉÒÏ×ÁÎÎÕÀ ÐÏÄ FAT ÄÉÓËÅÔÕ × ÄÉÓËÏ×ÏÄ %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "üÔÁ ÄÉÓËÅÔÁ ÎÅ ÏÔÆÏÒÍÁÔÉÒÏ×ÁÎÁ ÐÏÄ FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"þÔÏÂÙ ÉÓÐÏÌØÚÏ×ÁÔØ ÓÏÈÒÁÎÅÎÎÙÊ ×ÙÂÏÒ ÐÁËÅÔÏ×, ÚÁÐÕÓÔÉÔÅ ÕÓÔÁÎÏ×ËÕ Ó "
-"ÐÁÒÁÍÅÔÒÏÍ, ÎÁÐÒÉÍÅÒ ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "ïÛÉÂËÁ ÞÔÅÎÉÑ ÆÁÊÌÁ %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "ïË"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"îÅËÏÔÏÒÙÅ ÕÓÔÒÏÊÓÔ×Á ÎÁ ×ÁÛÅÍ ËÏÍÐØÀÔÅÒÅ ÄÌÑ ÒÁÂÏÔÙ ÎÕÖÄÁÀÔÓÑ × ``ÒÏÄÎÙÈ'' "
-"ÄÒÁÊ×ÅÒÁÈ.\n"
-"÷Ù ÍÏÖÅÔÅ ÎÁÊÔÉ ÉÎÆÏÒÍÁÃÉÀ Ï ÎÉÈ ÎÁ: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"õ ×ÁÓ ÄÏÌÖÅÎ ÂÙÔØ ËÏÒÎÅ×ÏÊ ÒÁÚÄÅÌ.\n"
-"äÌÑ ÜÔÏÇÏ ÓÏÚÄÁÊÔÅ ÒÁÚÄÅÌ (ÉÌÉ ÕËÁÖÉÔÅ ÕÖÅ ÓÕÝÅÓÔ×ÕÀÝÉÊ).\n"
-"úÁÔÅÍ ×ÙÂÅÒÉÔÅ ``ôÏÞËÁ ÍÏÎÔÉÒÏ×ÁÎÉÑ'' É ÕÓÔÁÎÏ×ÉÔÅ ÅÅ × `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "õ ×ÁÓ ÄÏÌÖÅÎ ÂÙÔØ ÒÁÚÄÅÌ swap"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"õ ×ÁÓ ÎÅÔ ÒÁÚÄÅÌÁ swap\n"
-"\n"
-"÷ÓÅ-ÔÁËÉ ÐÒÏÄÏÌÖÉÔØ?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "õ ×ÁÓ ÄÏÌÖÅÎ ÂÙÔØ ÒÁÚÄÅÌ swap"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "éÓÐÏÌØÚÏ×ÁÔØ Ó×ÏÂÏÄÎÏÅ ÍÅÓÔÏ"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "îÅÄÏÓÔÁÔÏÞÎÏ Ó×ÏÂÏÄÎÏÇÏ ÍÅÓÔÁ ÄÌÑ ÒÁÚÍÅÝÅÎÉÑ ÎÏ×ÙÈ ÒÁÚÄÅÌÏ×"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "éÓÐÏÌØÚÏ×ÁÔØ ÓÕÝÅÓÔ×ÕÀÝÉÊ ÒÁÚÄÅÌ"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "îÅÔ ÓÕÝÅÓÔ×ÕÀÝÉÈ ÒÁÚÄÅÌÏ× ÄÌÑ ÉÓÐÏÌØÚÏ×ÁÎÉÑ"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "éÓÐÏÌØÚÏ×ÁÔØ ÒÁÚÄÅÌ Windows ÄÌÑ loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "ëÏÔÏÒÙÊ ÒÁÚÄÅÌ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÄÌÑ Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "÷ÙÂÅÒÉÔÅ ÒÁÚÍÅÒÙ"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "òÁÚÍÅÒ ËÏÒÎÅ×ÏÇÏ ÒÁÚÄÅÌÁ × MB: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "òÁÚÍÅÒ ÒÁÚÄÅÌÁ swap × MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "éÓÐÏÌØÚÏ×ÁÔØ Ó×ÏÂÏÄÎÏÅ ÍÅÓÔÏ ÒÁÚÄÅÌÁ Windows"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "òÁÚÍÅÒ ËÁËÏÇÏ ÒÁÚÄÅÌÁ ×Ù ÈÏÔÉÔÅ ÉÚÍÅÎÉÔØ?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "÷ÙÞÉÓÌÅÎÉÅ ÇÒÁÎÉà ÆÁÊÌÏ×ÏÊ ÓÉÓÔÅÍÙ Windows"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"ðÒÏÇÒÁÍÍÁ ÉÚÍÅÎÅÎÉÑ ÒÁÚÍÅÒÁ ÒÁÚÄÅÌÏ× FAT ÎÅ ÍÏÖÅÔ ÏÂÒÁÂÏÔÁÔØ ÒÁÚÄÅÌ, \n"
-"ÐÒÏÉÚÏÛÌÁ ÓÌÅÄÕÀÝÁÑ ÏÛÉÂËÁ: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"÷ÁÛ ÒÁÚÄÅÌ Windows ÓÌÉÛËÏÍ ÆÒÁÇÍÅÎÔÉÒÏ×ÁÎ, ÚÁÐÕÓÔÉÔÅ ÓÎÁÞÁÌÁ ``defrag'' "
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"÷îéíáîéå!\n"
-"\n"
-"óÅÊÞÁÓ DrakX ÄÏÌÖÅÎ ÉÚÍÅÎÉÔØ ÒÁÚÍÅÒ ×ÁÛÅÇÏ ÒÁÚÄÅÌÁ Windows. âÕÄØÔÅ "
-"ÏÓÔÏÒÏÖÎÙ: ÜÔÁ ÏÐÅÒÁÃÉÑ ÏÐÁÓÎÁ. ÷ÙÊÄÉÔÅ ÉÚ ÐÒÏÃÅÄÕÒÙ ÕÓÔÁÎÏ×ËÉ É \n"
-"ÚÁÐÕÓÔÉÔÅ scandisk ÐÏÄ Windows, ÅÓÌÉ ×Ù ÎÅ ÓÄÅÌÁÌÉ ÜÔÏ ÄÏ ÓÉÈ ÐÏÒ (É \n"
-"ÖÅÌÁÔÅÌØÎÏ defrag), Á ÚÁÔÅÍ ×ÅÒÎÉÔÅÓØ Ë ÕÓÔÁÎÏ×ËÅ. óÄÅÌÁÊÔÅ ÔÁËÖÅ \n"
-"ÒÅÚÅÒ×ÎÕÀ ËÏÐÉÀ ÄÁÎÎÙÈ.\n"
-"åÓÌÉ ÇÏÔÏ×Ù, ÎÁÖÍÉÔÅ Ok."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "ëÁËÏÊ ÒÁÚÍÅÒ ×Ù ÈÏÔÉÔÅ ÓÏÈÒÁÎÉÔØ ÄÌÑ windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "ÒÁÚÄÅÌ %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "ÉÚÍÅÎÅÎÉÅ ÒÁÚÍÅÒÁ FAT ÐÒÏ×ÁÌÉÌÏÓØ: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"îÅÔ ÒÁÚÄÅÌÏ× FAT ÄÌÑ ÉÚÍÅÎÅÎÉÑ ÒÁÚÍÅÒÁ ÉÌÉ ÒÁÚÍÅÝÅÎÉÑ loopback (ÉÌÉ ÏÓÔÁÌÏÓØ "
-"ÎÅÄÏÓÔÁÔÏÞÎÏ ÍÅÓÔÁ)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "ïÞÉÓÔÉÔØ ×ÅÓØ ÄÉÓË"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "õÄÁÌÉÔØ Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"õ ×ÁÓ ÎÅÓËÏÌØËÏ ÖÅÓÔËÉÈ ÄÉÓËÏ×. îÁ ËÁËÏÊ ÉÚ ÎÉÈ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ Linux?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "÷óå ÓÕÝÅÓÔ×ÕÀÝÉÅ ÒÁÚÄÅÌÙ É ÉÈ ÄÁÎÎÙÅ ÂÕÄÕÔ ÐÏÔÅÒÑÎÙ ÎÁ ÄÉÓËÅ %s"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "óÐÅÃÉÁÌØÎÏÅ ÒÁÚÂÉÅÎÉÅ ÄÉÓËÁ"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "éÓÐÏÌØÚÕÊÔÅ fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"ôÅÐÅÒØ ÍÏÖÎÏ ÓÄÅÌÁÔØ ÒÁÚÂÉÅÎÉÅ %s.\n"
-"ðÏ ÚÁ×ÅÒÛÅÎÉÉ ÎÅ ÚÁÂÕÄØÔÅ ÓÏÈÒÁÎÉÔØ ÐÒÉ ÐÏÍÏÝÉ `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "õ ×ÁÓ ÎÅÄÏÓÔÁÔÏÞÎÏ ÍÅÓÔÁ ÎÁ ×ÁÛÅÍ ÒÁÚÄÅÌÅ Windows"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "îÅ ÎÁÊÄÅÎÏ ÍÅÓÔÁ ÄÌÑ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "íÁÓÔÅÒ ÒÁÚÂÉÅÎÉÑ ÄÉÓËÁ ÉÚ DrakX ÎÁÛÅÌ ÓÌÅÄÕÀÝÉÅ ÒÅÛÅÎÉÑ:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "òÁÚÂÉÅÎÉÅ ÎÁ ÒÁÚÄÅÌÙ ÎÅ ÐÒÏÛÌÏ: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "áËÔÉ×ÉÚÁÃÉÑ ÓÅÔÉ"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "äÅÁËÔÉ×ÉÚÁÃÉÑ ÓÅÔÉ"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"ðÒÏÉÚÏÛÌÁ ÏÛÉÂËÁ, ÎÏ Ñ ÎÅ ÚÎÁÀ, ËÁË ÅÅ ËÏÒÒÅËÔÎÏ ÏÂÒÁÂÏÔÁÔØ.\n"
-"ðÒÏÄÏÌÖÁÊÔÅ ÎÁ Ó×ÏÊ ÓÔÒÁÈ É ÒÉÓË."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "äÕÂÌÉÒÏ×ÁÎÉÅ ÔÏÞËÉ ÍÏÎÔÉÒÏ×ÁÎÉÑ %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"îÅËÏÔÏÒÙÅ ×ÁÖÎÙÅ ÐÁËÅÔÙ ÎÅ ÕÓÔÁÎÏ×ÉÌÉÓØ ËÏÒÒÅËÔÎÏ.\n"
-"ìÉÂÏ ×ÁÛ ÄÉÓËÏ×ÏÄ CD, ÌÉÂÏ CDROM ÎÅ × ÐÏÒÑÄËÅ.\n"
-"ðÒÏ×ÅÒØÔÅ cdrom ÎÁ ÕÓÔÁÎÏ×ÌÅÎÎÏÍ ËÏÍÐØÀÔÅÒÅ ËÏÍÁÎÄÏÊ \"rpm -qpl Mandrake/"
-"RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "äÏÂÒÏ ÐÏÖÁÌÏ×ÁÔØ × %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "äÉÓËÏ×ÏÄ ÎÅÄÏÓÔÕÐÅÎ"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "ðÅÒÅÈÏÄ ÎÁ ÜÔÁÐ `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "÷ÙÂÅÒÉÔÅ ÖÅÌÁÔÅÌØÎÙÊ ÒÁÚÍÅÒ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "ïÂÝÉÊ ÒÁÚÍÅÒ: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "÷ÅÒÓÉÑ: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "òÁÚÍÅÒ: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "÷ÙÂÏÒ ÐÁËÅÔÏ× ÄÌÑ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "éÎÆÏÒÍÁÃÉÑ"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "õÓÔÁÎÏ×ËÁ"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "éÄÅÔ ÕÓÔÁÎÏ×ËÁ"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "ðÏÄÏÖÄÉÔÅ, ÐÏÖÁÌÕÊÓÔÁ, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "ïÓÔÁ×ÛÅÅÓÑ ×ÒÅÍÑ "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "ïÂÝÅÅ ×ÒÅÍÑ "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "ðÏÄÇÏÔÏ×ËÁ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÁ %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "÷ÓÅ ÒÁ×ÎÏ ÐÒÏÄÏÌÖÁÔØ?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "ðÒÏÉÚÏÛÌÁ ÏÛÉÂËÁ ÐÏÌÕÞÅÎÉÑ ÐÁËÅÔÏ×:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "éÓÐÏÌØÚÏ×ÁÔØ ÓÕÝÅÓÔ×ÕÀÝÕÀ ÎÁÓÔÒÏÊËÕ ÄÌÑ X11?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"îÁ ×ÁÛÅÊ ÓÉÓÔÅÍÅ ÍÁÌÏ ÒÅÓÕÒÓÏ×. íÏÇÕÔ ×ÏÚÎÉËÎÕÔØ ÓÌÏÖÎÏÓÔÉ ÐÒÉ ÕÓÔÁÎÏ×ËÅ\n"
-"Mandrake Linux. åÓÌÉ ÜÔÏ ÓÌÕÞÉÔÓÑ, ×ÏÓÐÏÌØÚÕÊÔÅÓØ ÔÅËÓÔÏ×ÏÊ ÕÓÔÁÎÏ×ËÏÊ. äÌÑ "
-"ÜÔÏÇÏ\n"
-"ÎÁÖÍÉÔÅ `F1' ÐÒÉ ÚÁÇÒÕÚËÅ Ó CDROM, É ÚÁÔÅÍ ÎÁÂÅÒÉÔÅ `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "ëÌÁÓÓ õÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ ÏÄÉÎ ÉÚ ÓÌÅÄÕÀÝÉÈ ËÌÁÓÓÏ× ÕÓÔÁÎÏ×ËÉ:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "ïÂÝÉÊ ÏÂßÅÍ ÄÌÑ ×ÙÂÒÁÎÎÙÈ ×ÁÍÉ ÇÒÕÐÐ ÓÏÓÔÁ×ÌÑÅÔ ÐÒÉÍÅÒÎÏ %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"åÓÌÉ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ ÏÂßÅÍ, ÍÅÎØÛÉÊ ÞÅÍ ÜÔÏÔ, ÕËÁÖÉÔÅ ÐÒÏÃÅÎÔ \n"
-"ÐÁËÅÔÏ×, ËÏÔÏÒÙÅ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ.\n"
-"\n"
-"ðÒÉ ÎÉÚËÉÈ ÐÒÏÃÅÎÔÁÈ ÕÓÔÁÎÏ×ÑÔÓÑ ÔÏÌØËÏ ÎÁÉÂÏÌÅÅ ×ÁÖÎÙÅ ÐÁËÅÔÙ;\n"
-"ÕËÁÚÁÎÉÅ 100%% ÐÒÉ×ÅÄÅÔ Ë ÕÓÔÁÎÏ×ËÅ ×ÓÅÈ ×ÙÂÒÁÎÎÙÈ ÐÁËÅÔÏ×."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"õ ×ÁÓ ÅÓÔØ ÍÅÓÔÏ ÎÁ ÄÉÓËÅ ÔÏÌØËÏ ÄÌÑ %d%% ÉÚ ÜÔÉÈ ÐÁËÅÔÏ×.\n"
-"\n"
-"åÓÌÉ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ ÍÅÎØÛÅ, ÞÅÍ ÜÔÏ, ÕËÁÖÉÔÅ × ÐÒÏÃÅÎÔÁÈ ÄÏÌÀ,\n"
-"ÐÁËÅÔÏ×, ËÏÔÏÒÙÅ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ.\n"
-"ðÒÉ ÎÉÚËÉÈ ÐÒÏÃÅÎÔÁÈ ÕÓÔÁÎÏ×ÑÔÓÑ ÔÏÌØËÏ ÎÁÉÂÏÌÅÅ ×ÁÖÎÙÅ ÐÁËÅÔÙ;\n"
-"ÕËÁÚÁÎÉÅ %d%% ÐÒÉ×ÅÄÅÔ Ë ÕÓÔÁÎÏ×ËÅ ÎÁÉÂÏÌØÛÅÇÏ ×ÏÚÍÏÖÎÏÇÏ ÞÉÓÌÁ ÐÁËÅÔÏ×."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "âÏÌÅÅ ÔÏÞÎÙÊ ÉÈ ×ÙÂÏÒ ÍÏÖÎÏ ÂÕÄÅÔ ÓÄÅÌÁÔØ ÎÁ ÓÌÅÄÕÀÝÅÍ ÛÁÇÅ."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "ðÒÏÃÅÎÔ ÐÁËÅÔÏ× ÄÌÑ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "÷ÙÂÏÒ ÇÒÕÐÐÙ ÐÁËÅÔÏ×"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "÷ÙÂÏÒ ÏÔÄÅÌØÎÙÈ ÐÁËÅÔÏ×"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "ïÂÝÉÊ ÏÂßÅÍ: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "ðÌÏÈÏÊ ÐÁËÅÔ"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "éÍÑ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "÷ÁÖÎÏÓÔØ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"îÅÌØÚÑ ×ÙÂÉÒÁÔØ ÜÔÏÔ ÐÁËÅÔ, ÐÏÓËÏÌØËÕ ÄÌÑ ÅÇÏ ÕÓÔÁÎÏ×ËÉ ÎÅÄÏÓÔÁÔÏÞÎÏ ÍÅÓÔÁ"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "âÕÄÕÔ ÕÓÔÁÎÏ×ÌÅÎÙ ÓÌÅÄÕÀÝÉÅ ÐÁËÅÔÙ"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "âÕÄÕÔ ÕÄÁÌÅÎÙ ÓÌÅÄÕÀÝÉÅ ÐÁËÅÔÙ"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "÷Ù ÎÅ ÍÏÖÅÔÅ ×ÙÂÒÁÔØ/ÏÔÍÅÎÉÔØ ×ÙÂÏÒ ÜÔÏÇÏ ÐÁËÅÔÁ"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "üÔÏ ÏÂÑÚÁÔÅÌØÎÙÊ ÐÁËÅÔ, ÏÔ ÎÅÇÏ ÎÅÌØÚÑ ÏÔËÁÚÁÔØÓÑ"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "îÅÌØÚÑ ÏÔÍÅÎÉÔØ ×ÙÂÏÒ ÜÔÏÇÏ ÐÁËÅÔÁ, ÏÎ ÕÖÅ ÕÓÔÁÎÏ×ÌÅÎ."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"üÔÏÔ ÐÁËÅÔ ÓÌÅÄÕÅÔ ÏÂÎÏ×ÉÔØ\n"
-"÷Ù Õ×ÅÒÅÎÙ, ÞÔÏ ÈÏÔÉÔÅ ÏÔÍÅÎÉÔØ ÅÇÏ ×ÙÂÏÒ?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "îÅÌØÚÑ ÏÔÍÅÎÉÔØ ×ÙÂÏÒ ÜÔÏÇÏ ÐÁËÅÔÁ. ïÎ ÄÏÌÖÅÎ ÂÙÔØ ÏÂÎÏ×ÌÅÎ"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "ðÏËÁÚÁÔØ Á×ÔÏÍÁÔÉÞÅÓËÉ×ÙÂÒÁÎÎÙÅ ÐÁËÅÔÙ"
-
-#: ../../install_steps_gtk.pm_.c:460
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "óÏÈÒÁÎÉÔØ ÎÁ ÄÉÓËÅÔÅ"
-
-#: ../../install_steps_gtk.pm_.c:461
-#, fuzzy
-msgid "Updating package selection"
-msgstr "óÏÈÒÁÎÉÔØ ×ÙÂÏÒ ÐÁËÅÔÏ×"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Minimal install"
-msgstr "÷ÙÈÏÄ ÉÚ ÐÒÏÃÅÓÓÁ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "óÍÅÔÁ"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ÐÏÄÏÖÄÉÔÅ, ÐÏÄÇÏÔÁ×ÌÉ×ÁÅÔÓÑ ÕÓÔÁÎÏ×ËÁ"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d ÐÁËÅÔÏ×"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"÷ÎÉÍÁÎÉÅ\n"
-"ðÏÖÁÌÕÊÓÔÁ, ×ÎÉÍÁÔÅÌØÎÏ ÐÒÏÞÉÔÁÊÔÅ ÕÓÌÏ×ÉÑ, ÐÒÉ×ÅÄÅÎÎÙÅ ÎÉÖÅ. åÓÌÉ ×Ù ÎÅ "
-"ÓÏÇÌÁÓÎÙ Ó ÌÀÂÏÊ ÞÁÓÔØÀ\n"
-", ×ÁÍ ÎÅ ÒÁÚÒÅÛÁÅÔÓÑ ÕÓÔÁÎÁ×ÌÉ×ÁÔØ ÓÌÅÄÕÀÝÉÊ CD. îÁÖÍÉÔÅ 'ïÔËÁÚÁÔØÓÑ' \n"
-"ÄÌÑ ÐÒÏÄÏÌÖÅÎÉÑ ÕÓÔÁÎÏ×ËÉ ÂÅÚ ÜÔÏÇÏ ÎÏÓÉÔÅÌÑ.\n"
-"\n"
-"\n"
-"îÅËÏÔÏÒÙÅ ËÏÍÐÏÎÅÎÔÙ, ÓÏÄÅÒÖÁÝÉÅÅÓÑ ÎÁ ÓÌÅÄÕÀÝÅÍ CD ÎÅ ÒÕËÏ×ÏÄÓÔ×ÕÀÔÓÑ\n"
-"ÌÉÃÅÎÚÉÅÊ GPL ÉÌÉ ÐÏÄÏÂÎÙÍÉ ÓÏÇÌÁÛÅÎÉÑÍÉ. ëÁÖÄÙÊ ÔÁËÏÊ ËÏÍÐÏÎÅÎÔ\n"
-"ÒÕËÏ×ÏÄÓÔ×ÕÅÔÓÑ ÎÅÐÏÓÒÅÄÓÔ×ÅÎÎÏ ÕÓÌÏ×ÉÑÍÉ ÅÇÏ ÌÉÃÅÎÚÉÉ. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "ðÒÉÎÑÔØ"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "ïÔËÁÚÁÔØÓÑ"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"óÍÅÎÉÔÅ Cd-Rom!\n"
-"\n"
-"÷ÓÔÁ×ØÔÅ Cd-Rom ÐÏÄ ÎÁÚ×ÁÎÉÅÍ \"%s\" × ÐÒÉ×ÏÄ É ÎÁÖÍÉÔÅ Ok.\n"
-"åÓÌÉ Õ ×ÁÓ ÅÇÏ ÎÅÔ, ÎÁÖÍÉÔÅ ïÔÍÅÎÉÔØ (Cancel), ÞÔÏÂÙ ÉÚÂÅÖÁÔØ ÕÓÔÁÎÏ×ËÉ Ó "
-"ÜÔÏÇÏ ÄÉÓËÁ."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "ðÒÉ ÕÓÔÁÎÏ×ËÅ ÐÁËÅÔÏ× ÐÒÏÉÚÏÛÌÁ ÏÛÉÂËÁ:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "ðÒÏÉÚÏÛÌÁ ÏÛÉÂËÁ"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "ìÉÃÅÎÚÉÏÎÎÏÅ ÓÏÇÌÁÛÅÎÉÅ"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"÷×ÅÄÅÎÉÅ\n"
-"\n"
-"ïÐÅÒÁÃÉÏÎÎÁÑ ÓÉÓÔÅÍÁ É ÒÁÚÌÉÞÎÙÅ ËÏÍÐÏÎÅÎÔÙ, ÄÏÓÔÕÐÎÙÅ × ÄÉÓÔÒÉÂÕÔÉ×Å "
-"Mandrake Linux \n"
-"ÄÁÌÅÅ ÂÕÄÕÔ ÎÁÚÙ×ÁÔØÓÑ \"ðÒÏÇÒÁÍÍÎÙÅ ðÒÏÄÕËÔÙ\". ðÒÏÇÒÁÍÍÎÙÅ ÐÒÏÄÕËÔÙ "
-"ÏÔÎÏÓÑÔÓÑ, ÎÏ ÎÅ ÏÇÒÁÎÉÞÉ×ÁÀÔÓÑ \n"
-"ÎÁÂÏÒ ÐÒÏÇÒÁÍÍ, ÍÅÔÏÄÏ×, ÐÒÁ×ÉÌ É ÄÏËÕÍÅÎÔÁÃÉÉ, ÏÔÎÏÓÑÝÉÍÓÑ Ë ÏÐÅÒÁÃÉÏÎÎÏÊ \n"
-"ÓÉÓÔÅÍÅ É ÒÁÚÌÉÞÎÙÍ ËÏÍÐÏÎÅÎÔÁÍ ÄÉÓÔÒÉÂÕÔÉ×Á Mandrake Linux.\n"
-"\n"
-"\n"
-"1. ìÉÃÅÚÉÏÎÎÏÅ ÓÏÇÌÁÛÅÎÉÅ\n"
-"\n"
-"ðÏÖÁÌÕÊÓÔÁ, ÐÒÏÞÉÔÁÊÔÅ ÜÔÏÔ ÄÏËÕÍÅÎÔ ×ÎÉÍÁÔÅÌØÎÏ. üÔÏÔ ÄÏËÕÍÅÎÔ Ñ×ÌÑÅÔÓÑ "
-"ÌÉÃÅÎÚÉÏÎÎÙÍ ÓÏÇÌÁÛÅÎÉÅÍ ÍÅÖÄÕ ÷ÁÍÉ É   \n"
-"MandrakeSoft S.A., ËÏÔÏÒÏÅ ÐÒÉÍÅÎÑÅÔÓÑ Ë ðÒÏÇÒÁÍÍÎÙÍ ðÒÏÄÕËÔÁÍ.\n"
-"õÔÓÁÎÁ×ÌÉ×ÁÑ, ËÏÐÉÒÕÑ ÉÌÉ ÉÓÐÏÌØÚÕÑ ÌÀÂÙÍ ÏÂÒÁÚÏÍ ðÒÏÇÒÁÍÍÙÎÅ ðÒÏÄÕËÔÙ, ÷Ù "
-"Ñ×ÎÏ \n"
-"ÐÒÉÎÉÍÁÅÔÅ É ÐÏÌÎÏÓÔØÀ ÓÏÇÌÁÛÁÅÔÅÓØ ÓÌÅÄÏ×ÁÔØ ÔÅÒÍÉÎÁÍ É ÕÓÌÏ×ÉÑÍ  ÜÔÏÊ "
-"ìÉÃÅÎÚÉÉ. \n"
-"åÓÌÉ ÷Ù ÎÅ ÓÏÇÌÁÓÎÙ Ó ÌÀÂÏÊ ÞÁÓÔØÀ ÄÁÎÎÏÊ ìÉÃÅÎÚÉÉ, ÷ÁÍ ÎÅ ÒÁÚÒÅÛÁÅÔÓÑ "
-"ÕÓÔÁÎÁ×ÌÉ×ÁÔØ, ËÏÐÉÒÏ×ÁÔØ ÉÌÉ ÉÓÐÏÌØÚÏ×ÁÔØ \n"
-"ðÒÏÇÒÁÍÍÎÙÅ ÐÒÏÄÕËÔÙ. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "ëÌÁ×ÉÁÔÕÒÁ"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ ÒÁÓËÌÁÄËÕ ×ÁÛÅÊ ËÌÁ×ÉÁÔÕÒÙ"
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "ðÏÌÎÙÊ ÓÐÉÓÏË ÄÏÓÔÕÐÎÙÈ ËÌÁ×ÉÁÔÕÒ"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "ëÁËÏÊ ËÌÁÓÓ ÕÓÔÁÎÏ×ËÉ ×Ù ÈÏÔÉÔÅ?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "õÓÔÁÎÏ×ËÁ/ïÂÎÏ×ÌÅÎÉÅ"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "üÔÏ ÎÏ×ÁÑ ÕÓÔÁ×Ï×ËÁ ÉÌÉ ÏÂÎÏ×ÌÅÎÉÅ?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "òÅËÏÍÅÎÄÕÅÔÓÑ"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "üËÓÐÅÒÔ"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "ïÂÎÏ×ÌÅÎÉÅ"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ÕËÁÖÉÔÅ ÔÉÐ ×ÁÛÅÊ ÍÙÛÉ"
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "ðÏÒÔ ÍÙÛÉ"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "õËÁÖÉÅÔ, Ë ËÁËÏÍÕ ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÏÍÕ ÐÏÒÔÕ ÐÏÄËÌÀÞÅÎÁ ×ÁÛÁ ÍÙÛØ."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "üÍÕÌÑÃÉÑ ËÎÏÐÏË ÍÙÛÉ"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "üÍÕÌÑÃÉ 2 ËÎÏÐÏË"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "üÍÕÌÑÃÉÑ 3 ËÎÏÐÏË"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "îÁÓÔÒÏÊËÁ ËÁÒÔ PCMCIA ..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "îÁÓÔÒÏÊËÁ IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "ÎÅÔ ÄÏÓÔÕÐÎÙÈ ÒÁÚÄÅÌÏ×"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "ðÒÏÓÍÏÔÒ ÒÁÚÄÅÌÏ× - ÐÏÉÓË ÔÏÞÅË ÍÏÎÔÉÒÏ×ÁÎÉÑ"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "÷ÙÂÅÒÉÔÅ ÔÏÞËÉ ÍÏÎÔÉÒÏ×ÁÎÉÑ"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"îÅ ÍÏÇÕ ÐÒÏÞÉÔÁÔØ ÔÁÂÌÉÃÕ ÒÁÚÄÅÌÏ×, ÏÎÁ ÓÌÉÛËÏÍ ÐÏ×ÒÅÖÄÅÎÁ ÄÌÑ ÍÅÎÑ :(\n"
-"íÏÖÎÏ ÐÏÐÒÏÂÏ×ÁÔØ ÏÞÉÓÔÉÔØ ÐÌÏÈÉÅ ÒÁÚÄÅÌÙ (÷óñ éîæïòíáãéñ ÂÕÄÅÔ ÐÏÔÒÅÑÎÁ!).\n"
-"äÒÕÇÏÊ ×ÁÒÉÁÎÔ - ÎÅ ÒÁÚÒÅÛÁÔØ DrakX ÉÚÍÅÎÑÔØ ÔÁÂÌÉÃÕ ÒÁÚÄÅÌÏ×.\n"
-"(ÏÛÉÂËÁ %s)\n"
-"\n"
-"÷Ù ÓÏÇÌÁÓÎÙ ÐÏÔÅÒÑÔØ ×ÓÅ ×ÁÛÉ ÒÁÚÄÅÌÙ?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ÎÅ ÓÍÏÇ ËÏÒÒÅËÔÎÏ ÐÒÏÞÉÔÁÔØ ÔÁÂÌÉÃÕ ÒÁÚÄÅÌÏ×.\n"
-"ðÒÏÄÏÌÖÁÊÔÅ ÎÁ Ó×ÏÊ ÓÔÒÁÈ É ÒÉÓË!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:349
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "÷ÙÂÏÒ ÒÁÚÄÅÌÏ× ÄÌÑ ÆÏÒÍÁÔÉÒÏ×ÁÎÉÑ"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "ëÏÒÎÅ×ÏÊ ÒÁÚÄÅÌ"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "ëÁËÏÊ ÒÁÚÄÅÌ Ñ×ÌÑÅÔÓÑ ËÏÒÎÅ×ÙÍ (/) × ×ÁÛÅÊ ÓÉÓÔÅÍÅ?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "þÔÏÂÙ ÍÏÄÉÆÉËÁÃÉÑ ÔÁÂÌÉÃÙ ÒÁÚÄÅÌÏ× ÏÓÕÝÅÓÔ×ÉÌÁÓØ, ÐÅÒÅÚÁÇÒÕÚÉÔÅÓØ"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "÷ÙÂÏÒ ÒÁÚÄÅÌÏ× ÄÌÑ ÆÏÒÍÁÔÉÒÏ×ÁÎÉÑ"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "ðÒÏ×ÅÒÉÔØ ÐÌÏÈÉÅ ÂÌÏËÉ?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "æÏÒÍÁÔÉÒÏ×ÁÎÉÅ ÒÁÚÄÅÌÏ×"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "óÏÚÄÁÎÉÅ É ÆÏÒÍÁÔÉÒÏ×ÁÎÉÅ ÆÁÊÌÁ %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"îÅÄÏÓÔÁÔÏÞÎÙÊ ÒÁÚÍÅÒ ×ÉÒÔÕÁÌØÎÏÊ ÐÁÍÑÔÉ (swap) ÄÌÑ ÕÓÔÁÎÏ×ËÉ, ÎÅÍÎÏÇÏ "
-"Õ×ÅÌÉÞØÔÅ"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "ðÒÏÓÍÏÔÒ ÄÏÓÔÕÐÎÙÈ ÐÁËÅÔÏ×"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "ðÏÉÓË ÐÁËÅÔÏ× ÄÌÑ ÏÂÎÏ×ÌÅÎÉÑ"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"îÁ ×ÁÛÅÊ ÓÉÓÔÅÍÅ ÏÓÔÁÌÏÓØ ÎÅÄÏÓÔÁÔÏÞÎÏ ÍÅÓÔÁ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ÉÌÉ ÏÂÎÏ×ÌÅÎÉÑ (%"
-"d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "ðÏÌÎÏÓÔØÀ (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "íÉÎÉÍÕÍ (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "òÅËÏÍÅÎÄÕÅÔÓÑ (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "óÐÅÃÉÁÌØÎÁÑ"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:525
-#, fuzzy
-msgid "Load from floppy"
-msgstr "÷ÏÓÓÔÁÎÏ×ÉÔØ Ó ÄÉÓËÅÔÙ"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "÷ÏÓÓÔÁÎÏ×ÉÔØ Ó ÄÉÓËÅÔÙ"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Package selection"
-msgstr "÷ÙÂÏÒ ÇÒÕÐÐÙ ÐÁËÅÔÏ×"
-
-#: ../../install_steps_interactive.pm_.c:532
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "÷ÓÔÁ×ØÔÅ ÄÉÓËÅÔÕ × ÄÉÓËÏ×ÏÄ %s"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "óÏÈÒÁÎÉÔØ ÎÁ ÄÉÓËÅÔÅ"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "÷ÙÂÒÁÎÎÙÊ ÒÁÚÍÅÒ ÂÏÌØÛÅ, ÞÅÍ ÄÏÓÔÕÐÎÏ ÍÅÓÔÁ"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"åÓÌÉ Õ ×ÁÓ ÅÓÔØ ×ÓÅ CD ÉÚ ÐÒÉ×ÅÄÅÎÎÏÇÏ ÎÉÖÅ ÓÐÉÓËÁ, ÎÁÖÍÉÔÅ Ok.\n"
-"åÓÌÉ Õ ×ÁÓ ÎÅÔ ÎÉ ÏÄÎÏÇÏ ÉÚ ÎÉÈ, ÎÁÖÍÉÔÅ ïÔÍÅÎÉÔØ.\n"
-"åÓÌÉ ÏÔÓÕÔÓÔ×ÕÀÔ ÔÏÌØËÏ ÏÔÄÅÌØÎÙÅ CD, ÏÔÍÅÎÉÔÅ ÉÈ ×ÙÂÏÒ É ÎÁÖÍÉÔÅ Ok."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ÐÏÄ ÉÍÅÎÅÍ \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"õÓÔÁÎÏ×ËÁ ÐÁËÅÔÁ %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÐÏÓÌÅ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "÷ÓÔÁ×ØÔÅ ÄÉÓËÅÔÕ × ÄÉÓËÏ×ÏÄ %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "÷ÓÔÁ×ØÔÅ ÞÉÓÔÕÀ ÄÉÓËÅÔÕ × ÄÉÓËÏ×ÏÄ %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"ôÅÐÅÒØ Õ ×ÁÓ ÅÓÔØ ×ÏÚÍÏÖÎÏÓÔØ ÚÁÇÒÕÚÉÔØ ÐÒÏÇÒÁÍÍÙ ÄÌÑ ÛÉÆÒÏ×ÁÎÉÑ.\n"
-"\n"
-"÷îéíáîéå:\n"
-"\n"
-"÷ÓÌÅÄÓÔ×ÉÅ ÏÂÝÉÈ ÏÇÒÁÎÉÞÅÎÉÊ, ÎÁËÌÁÄÙ×ÁÅÍÙÈ ÎÁ ÐÒÏÇÒÁÍÍÙ ÜÔÏÇÏ ÒÏÄÁ É "
-"ÒÁÚÌÉÞÎÙÈ\n"
-"× ÒÁÚÎÙÈ ÚÁËÏÎÏÄÁÔÅÌØÓÔ×ÁÈ, ÐÒÏÄÁ×Åà É/ÉÌÉ ÐÏÌØÚÏ×ÁÔÅÌØ ÜÔÉÈ ÐÒÏÇÒÁÍÍ "
-"ÄÏÌÖÅÎ\n"
-"ÄÏÌÖÅÎ ÕÂÅÄÉÔØÓÑ, ÞÔÏ ÚÁËÏÎÙ ÅÇÏ/ÉÈ ÓÔÒÁÎ ÒÁÚÒÅÛÁÀÔ ÓËÁÞÉ×ÁÔØ, ÈÒÁÎÉÔØ\n"
-"É/ÉÌÉ ÉÓÐÏÌØÚÏ×ÁÔØ ÜÔÉ ÐÒÏÇÒÁÍÍÙ.\n"
-"\n"
-"ëÒÏÍÅ ÔÏÇÏ, ÐÒÏÄÁ×Åà É/ÉÌÉ ÐÏÌØÚÏ×ÁÔÅÌØ ÄÏÌÖÎÙ ÂÙÔØ Õ×ÅÒÅÎÙ, ÞÔÏ ÎÅ  "
-"ÎÁÒÕÛÁÀÔ\n"
-"ÚÁËÏÎÏ× Ó×ÏÅÊ ÓÔÒÁÎÙ. åÓÌÉ ÐÒÏÄÁ×Åà É/ÉÌÉ ÐÏÌØÚÏ×ÁÔÅÌØ ÐÒÅÓÔÕÐÁÅÔ\n"
-"ÜÔÉ ÐÒÉÍÅÎÉÍÙÅ Ë ÎÅÍÕ ÚÁËÏÎÙ, ÏÎ/ÏÎÉ ÐÏÎÅÓÅÔ ÓÕÒÏ×ÕÀ\n"
-"ÏÔ×ÅÔÓÔ×ÅÎÎÏÓÔØ.\n"
-"\n"
-"îÉ × ËÏÅÍ ÓÌÕÞÁÅ ÎÉ Mandrakesoft, ÎÉ ÅÅ ÉÓÐÏÌÎÉÔÅÌÉ É ÐÏÓÔÁ×ÝÉËÉ ÎÅ "
-"ÏÔ×ÅÞÁÀÔ\n"
-"ÚÁ ÎÅÐÏÓÒÅÄÓÔ×ÅÎÎÙÊ, ÎÅÐÒÑÍÏÊ ÉÌÉ ÓÌÕÞÁÊÎÙÊ ×ÒÅÄ (×ËÌÀÞÁÑ, ÎÏ ÎÅ \n"
-"ÏÇÒÁÎÉÞÉ×ÁÑÓØ ÕÐÕÝÅÎÎÏÊ ÐÒÉÂÙÌØÀ, ÐÒÅÒÙ×ÁÎÉÅÍ ÂÉÚÎÅÓÁ, ÐÏÔÅÒÅÊ ËÏÍÍÅÒÞÅÓËÉÈ "
-"ÄÁÎÎÙÈ É\n"
-"ÄÒÕÇÉÍÉ ÐÏÔÅÒÑÍÉ, Á ÔÁËÖÅ ×ÏÚÍÏÖÎÙÍÉ ÓÁÎËÃÉÑÍÉ É ÛÔÒÁÆÁÍÉ ÐÏÄÌÅÖÁÝÉÍÉ "
-"ÕÐÌÁÔÅ\n"
-"ÐÏ ÒÅÛÅÎÉÀ ÓÕÄÁ) ×ÙÔÅËÁÀÝÉÊ ÉÚ ÉÓÐÏÌØÚÏ×ÁÎÉÑ, ×ÌÁÄÅÎÉÑ, ÉÌÉ ÐÒÏÓÔÏ\n"
-"ÓËÁÞÉ×ÁÎÉÑ ÜÔÉÈ ÐÒÏÇÒÁÍÍ, Ë ËÏÔÏÒÙÍ ÐÒÏÄÁ×Åà ÉÌÉ ÐÏÌØÚÏ×ÁÔÅÌØ ÐÏÌÕÞÉÌÉ\n"
-"ÄÏÓÔÕÐ ÐÏÓÌÅ ÐÏÄÐÉÓÁÎÉÑ ÎÁÓÔÏÑÝÅÇÏ ÓÏÇÌÁÛÅÎÉÑ.\n"
-"\n"
-"ó ÌÀÂÙÍÉ ×ÏÐÒÏÓÁÍÉ, ËÁÓÁÀÝÉÍÉÓÑ ÓÏÇÌÁÛÅÎÉÑ, ÏÂÒÁÝÁÊÔÅÓØ: \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "÷ÙÂÏÒ ÓÅÒ×ÅÒÁ ÄÌÑ ÐÏÌÕÞÅÎÉÑ ÐÁËÅÔÏ×"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "ó×ÑÚØ Ó ÓÅÒ×ÅÒÏÍ ÄÌÑ ÐÏÌÕÞÅÎÉÑ ÓÐÉÓËÁ ÄÏÓÔÕÐÎÙÈ ÐÁËÅÔÏ×"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ ÐÁËÅÔÙ, ËÏÔÏÒÙÅ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "ëÁËÏ× ×ÁÛ ÞÁÓÏ×ÏÊ ÐÏÑÓ?"
-
-#: ../../install_steps_interactive.pm_.c:813
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "÷ÁÛÉ ÓÉÓÔÅÍÎÙÅ ÞÁÓÙ ÕÓÔÁÎÏ×ÌÅÎÙ ÎÁ GMT?"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:821
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS ÓÅÒ×ÅÒ"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "õÄÁÌÅÎÎÙÊ CUPS ÓÅÒ×ÅÒ"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "îÅÔ ÐÒÉÎÔÅÒÁ"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "òÅÚÀÍÅ"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "íÙÛØ"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "þÁÓÏ×ÏÊ ÐÏÑÓ"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "ðÒÉÎÔÅÒ"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "÷ÎÕÔÒÅÎÎÑÑ ËÁÒÔÁ ISDN"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "ú×ÕËÏ×ÁÑ ËÁÒÔÁ"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV ËÁÒÔÁ"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-#, fuzzy
-msgid "NIS"
-msgstr "éÓÐÏÌØÚÏ×ÁÔØ NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-#, fuzzy
-msgid "Local files"
-msgstr "ìÏËÁÌØÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "úÁÄÁÎÉÅ ÐÁÒÏÌÑ ÄÌÑ root"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "îÅÔ ÐÁÒÏÌÑ"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "üÔÏÔ ÐÁÒÏÌØ ÓÌÉÛËÏÍ ÐÒÏÓÔ (ÅÇÏ ÄÌÉÎÁ ÄÏÌÖÎÁ ÂÙÔØ ÎÅ ÍÅÎÅÅ %d ÓÉÍ×ÏÌÏ×)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "áÕÔÅÎÔÉÆÉËÁÃÉÑ"
-
-#: ../../install_steps_interactive.pm_.c:949
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "áÕÔÅÎÔÉÆÉËÁÃÉÑ"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:951
-#, fuzzy
-msgid "LDAP Server"
-msgstr "NIS ÓÅÒ×ÅÒ"
-
-#: ../../install_steps_interactive.pm_.c:957
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "áÕÔÅÎÔÉÆÉËÁÃÉÑ NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS ÄÏÍÅÎ"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS ÓÅÒ×ÅÒ"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"ó ÐÏÍÏÝØÀ ÓÐÅÃÉÁÌØÎÏÊ ÚÁÇÒÕÚÏÞÎÏÊ ÄÉÓËÅÔÙ ×Ù ÓÍÏÖÅÔÅ ÚÁÇÒÕÖÁÔØ Linux ×ÎÅ "
-"ÚÁ×ÉÓÉÍÏÓÔÉ ÏÔ ÏÂÙÞÎÏÇÏ ÎÁÞÁÌØÎÏÇÏ ÚÁÇÒÕÚÞÉËÁ. üÔÏ ÍÏÖÅÔ ÂÙÔØ ÐÏÌÅÚÎÏ, ÅÓÌÉ "
-"×Ù ÎÅ ÈÏÔÉÔÅ ÕÓÔÁÎÁ×ÌÉ×ÁÔØ SILO, ÉÌÉ ÅÓÌÉ ÄÒÕÇÁÑ ÏÐÅÒÁÃÉÏÎÎÁÑ ÓÉÓÔÅÍÁ ÕÄÁÌÉÔ "
-"SILO, ÉÌÉ SILO ÎÅ ÓÍÏÖÅÔ ÒÁÂÏÔÁÔØ × ×ÁÛÅÊ ËÏÎÆÉÇÕÒÁÃÉÉ. óÐÅÃÉÁÌØÎÁÑ "
-"ÚÁÇÒÕÚÏÞÎÁÑ ÄÉÓËÅÔÁ ÔÁËÖÅ ÍÏÖÅÔ ÂÙÔØ ÉÓÐÏÌØÚÏ×ÁÎÁ Ó ÒÅÍÏÎÔÎÙÍ ÏÂÒÁÚÏÍ "
-"Mandrake, ÞÔÏ ÎÁÍÎÏÇÏ ÏÂÌÅÇÞÉÔ ×ÏÓÓÔÁÎÏ×ÌÅÎÉÅ ÓÉÓÔÅÍÙ ÐÏÓÌÅ ÔÑÖÅÌÙÈ ÓÂÏÅ×.\n"
-"\n"
-"åÓÌÉ ÈÏÔÉÔÅ ÓÏÚÄÁÔØ ÚÁÇÒÕÚÏÞÎÙÊ ÄÉÓË ÄÌÑ Ó×ÏÅÊ ÓÉÓÔÅÍÙ, ×ÓÔÁ×ØÔÅ ÄÉÓËÅÔÕ × "
-"ÐÅÒ×ÙÊ \n"
-"ÄÉÓËÏ×ÏÄ É ÎÁÖÍÉÔÅ \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "ðÅÒ×ÙÊ ÄÉÓËÏ×ÏÄ"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "÷ÔÏÒÏÊ ÄÉÓËÏ×ÏÄ"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "ðÒÏÐÕÓÔÉÔØ"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"óÐÅÃÉÁÌØÎÁÑ ÚÁÇÒÕÚÏÞÎÁÑ ÄÉÓËÅÔÁ ÏÂÅÓÐÅÞÉ×ÁÅÔ ×ÏÚÍÏÖÎÏÓÔØ ÚÁÇÒÕÚËÉ Linux ×ÎÅ "
-"ÚÁ×ÉÓÉÍÏÓÔÉ ÏÔ ÏÂÙÞÎÏÇÏ ÎÁÞÁÌØÎÏÇÏ ÚÁÇÒÕÚÞÉËÁ. üÔÏ ÍÏÖÅÔ ÂÙÔØ ÐÏÌÅÚÎÏ, ÅÓÌÉ "
-"×Ù ÎÅ ÈÏÔÉÔÅ ÕÓÔÁÎÁ×ÌÉ×ÁÔØ LILO (ÉÌÉ grub) ÎÁ ×ÁÛÅÊ ÓÉÓÔÅÍÅ, ÉÌÉ ÅÓÌÉ ÄÒÕÇÁÑ "
-"ÏÐÅÒÁÃÉÏÎÎÁÑ ÓÉÓÔÅÍÁ ÕÄÁÌÉÔ LILO, ÉÌÉ LILO ÎÅ ÓÍÏÖÅÔ ÒÁÂÏÔÁÔØ × ×ÁÛÅÊ "
-"ËÏÎÆÉÇÕÒÁÃÉÉ. óÐÅÃÉÁÌØÎÁÑ ÚÁÇÒÕÚÏÞÎÁÑ ÄÉÓËÅÔÁ ÔÁËÖÅ ÍÏÖÅÔ ÂÙÔØ ÉÓÐÏÌØÚÏ×ÁÎÁ "
-"Ó ÒÅÍÏÎÔÎÙÍ ÏÂÒÁÚÏÍ Mandrake, ÞÔÏ ÎÁÍÎÏÇÏ ÏÂÌÅÇÞÉÔ ×ÏÓÓÔÁÎÏ×ÌÅÎÉÅ ÓÉÓÔÅÍÙ "
-"ÐÏÓÌÅ ÔÑÖÅÌÙÈ ÓÂÏÅ×.\n"
-"èÏÔÉÔÅ ÓÏÚÄÁÔØ ÚÁÇÒÕÚÏÞÎÙÊ ÄÉÓË ÓÅÊÞÁÓ?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "ðÒÏÓÔÉÔÅ, ÎÏ ÄÉÓËÏ×ÏÄ ÎÅÄÏÓÔÕÐÅÎ"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "÷ÙÂÅÒÉÔÅ ÄÉÓËÏ×ÏÄ, × ËÏÔÏÒÏÍ ÂÕÄÅÔ ÓÏÚÄÁ×ÁÔØÓÑ ÚÁÇÒÕÚÏÞÎÁÑ ÄÉÓËÅÔÁ"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "÷ÓÔÁ×ØÔÅ ÄÉÓËÅÔÕ × ÄÉÓËÏ×ÏÄ %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "óÏÚÄÁÎÉÅ ÚÁÇÒÕÚÏÞÎÏÊ ÄÉÓËÅÔÙ"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "ðÏÄÇÏÔÏ×ËÁ ÎÁÞÁÌØÎÏÇÏ ÚÁÇÒÕÚÞÉËÁ"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "÷Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"ïÛÉÂËÁ ÕÓÔÁÎÏ×ËÉ aboot, \n"
-"ÐÏÐÒÏÂÏ×ÁÔØ ÓÄÅÌÁÔØ ÕÓÔÁÎÏ×ËÕ ÎÁÓÉÌØÎÏ, ÄÁÖÅ ÅÓÌÉ ÜÔÏ ÒÁÚÒÕÛÉÔ ÐÅÒ×ÙÊ ÒÁÚÄÅÌ?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "õÓÔÁÎÏ×ËÁ ÍÅÎÅÄÖÅÒÁ ÚÁÇÒÕÚËÉ"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "õÓÔÁÎÏ×ËÁ bootloader ÎÅ ÐÒÏÛÌÁ. ðÒÏÉÚÏÛÌÁ ÓÌÅÄÕÀÝÁÑ ÏÛÉÂËÁ:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"÷ÏÚÍÏÖÎÏ, ×ÁÍ ÎÕÖÎÏ ÓÍÅÎÉÔØ ×ÁÛ Open Firmware ÚÁÇÒÕÚÏÞÎÏÅ ÕÓÔÒÏÊÓÔ×Ï,\n"
-" ÞÔÏÂÙ ÚÁÒÁÂÏÔÁÌ ÎÁÞÁÌØÎÙÊ ÚÁÇÒÕÚÞÉË. åÓÌÉ ×Ù ÎÅ ×ÉÄÉÔÅ ÐÒÉÇÌÁÛÅÎÉÑ "
-"ÎÁÞÁÌØÎÏÇÏ ÚÁÇÒÕÚÞÉËÁ\n"
-" ÐÒÉ ÐÅÒÅÚÁÇÒÕÚËÅt, ÎÁÖÍÉÔÅ É ÕÄÅÒÖÉ×ÁÊÔÅ Command-Option-O-F ÐÒÉ "
-"ÐÅÒÅÚÁÇÒÕÚËÅ É ××ÅÄÉÔÅ:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" úÁÔÅÍ ××ÅÄÉÔÅ: shut-down\n"
-"ðÒÉ ÓÌÅÄÕÀÝÅÊ ÚÁÇÒÕÚËÅ ×Ù Õ×ÉÄÉÔÅ ÐÒÉÇÌÁÛÅÎÉÅ ÎÁÞÁÌØÎÏÇÏ ÚÁÇÒÕÚÞÉËÁ."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "îÉÚËÉÊ"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "óÒÅÄÎÉÊ"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "÷ÙÓÏËÉÊ"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "õÒÏ×ÅÎØ ÂÅÚÏÐÁÓÎÏÓÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "÷ÓÔÁ×ØÔÅ ÞÉÓÔÕÀ ÄÉÓËÅÔÕ × ÄÉÓËÏ×ÏÄ %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "óÏÚÄÁÎÉÅ ÓÁÍÏ-ÕÓÔÁÎÁ×ÌÉ×ÁÀÝÅÊÓÑ ÄÉÓËÅÔÙ"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"îÅËÏÔÏÒÙÅ ÛÁÇÉ ÎÅ ÚÁ×ÅÒÛÅÎÙ.\n"
-"\n"
-"÷Ù ÄÅÊÓÔ×ÉÔÅÌØÎÏ ÈÏÔÉÔÅ ×ÙÊÔÉ ÓÅÊÞÁÓ?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"ðÏÚÄÒÁ×ÌÑÅÍ, ÕÓÔÁÎÏ×ËÁ ÚÁ×ÅÒÛÅÎÁ.\n"
-"÷ÙÎØÔÅ ÚÁÇÒÕÚÏÞÎÙÊ ÄÉÓË É ÎÁÖÍÉÔÅ enter ÄÌÑ ÐÅÒÅÚÁÇÒÕÚËÉ.\n"
-"úÁ ÉÎÆÏÒÍÁÃÉÅÊ Ï ÉÓÐÒÁ×ÌÅÎÉÑÈ ÄÁÎÎÏÇÏ ×ÙÐÕÓËÁ Mandrake Linux,\n"
-"ÏÂÒÁÝÁÊÔÅÓØ ÎÁ http://www.mandrakelinux.com/.\n"
-"éÎÆÏÒÍÁÃÉÑ Ï ÎÁÓÔÒÏÊËÅ ×ÁÛÅÊ ÓÉÓÔÅÍÙ ÅÓÔØ × ÐÏÓÌÅ-ÕÓÔÁÎÏ×ÏÞÎÏÊ\n"
-"ÇÌÁ×Å ×ÁÛÅÇÏ òÕËÏ×ÏÄÓÔ×Á ðÏÌØÚÏ×ÁÔÅÌÑ ÉÚ ïÆÉÃÉÁÌØÎÏÇÏ Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "óÏÚÄÁÎÉÅ ÓÁÍÏ-ÕÓÔÁÎÁ×ÌÉ×ÁÀÝÅÊÓÑ ÄÉÓËÅÔÙ"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"ðÒÉ ÖÅÌÁÎÉÉ Á×ÔÏÕÓÔÁÎÏ×ËÁ ÍÏÖÅÔ ÂÙÔØ ÐÏÌÎÏÓÔØÀ Á×ÔÏÍÁÔÉÚÉÒÏ×ÁÎÁ,\n"
-"× ÜÔÏÍ ÓÌÕÞÁÅ ÏÎÁ ÐÒÏÉÚÏÊÄÅÔ ÐÒÑÍÏ ÎÁ ÄÉÓË!!\n"
-"(ÜÔÏ ÉÍÅÌÏÓØ ××ÉÄÕ ÐÒÉ ÕÓÔÁÎÏ×ËÅ ÎÁ ÄÒÕÇÏÊ ËÏÍÐØÀÔÅÒ).\n"
-"\n"
-"÷ÏÚÍÏÖÎÏ, ×Ù ÐÒÅÄÐÏÞÔÅÔÅ ÐÏ×ÔÏÒÉÔØ ÕÓÔÁÎÏ×ËÕ.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "á×ÔÏÍÁÔÉÞÅÓËÉÊ"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "ðÏ×ÔÏÒÉÔØ"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "óÏÈÒÁÎÉÔØ ×ÙÂÏÒ ÐÁËÅÔÏ×"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "õÓÔÁÎÏ×ËÁ Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> ÍÅÖÄÕ ÜÌÅÍÅÎÔÁÍÉ  |  <Space> ×ÙÂÏÒ  |  <F12> ÓÌÅÄÕÀÝÉÊ "
-"ÜËÒÁÎ "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "ÏÔÓÕÔÓ×ÕÅÔ kdesy"
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "÷ÙÂÅÒÉÔÅ ÄÅÊÓÔ×ÉÅ"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "ðÒÏÄ×ÉÎÕÔÙÊ"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "ðÏÄÏÖÄÉÔÅ, ÐÏÖÁÌÕÊÓÔÁ"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "òÁÚ×ÅÒÎÕÔØ ÄÅÒÅ×Ï"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "ó×ÅÒÎÕÔØ ÄÅÒÅ×Ï"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "ðÅÒÅËÌÀÞÅÎÉÅ ÍÅÖÄÕ ÐÒÏÓÔÙÍ ÓÐÉÓËÏÍ É ÓÏÒÔÉÒÏ×ËÏÊ ÐÏ ÇÒÕÐÐÁÍ"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "îÅÏÐÒÅÄÅÌÅÎÎÏÓÔØ (%s), ÂÕÄØÔÅ ÐÏÔÏÞÎÅÅ\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "ðÌÏÈÏÊ ×ÙÂÏÒ, ÐÏÐÒÏÂÕÊÔÅ ÅÝÅ\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (ÕÍÏÌÞÁÎÉÅ %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "÷ÁÛ ×ÙÂÏÒ? (ÕÍÏÌÞÁÎÉÅ %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "÷ÁÛ ×ÙÂÏÒ? (ÕÍÏÌÞÁÎÉÅ %s ××ÅÄÉÔÅ 'none' ÐÒÉ ÏÔÓÕÔÓÔ×ÉÉ) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "þÅÛÓËÉÊ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "îÅÍÅÃËÉÊ"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "éÓÐÁÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "æÉÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "æÒÁÎÃÕÚÓËÉÊ"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "îÏÒ×ÅÖÓËÉÊ"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "ðÏÌØÓËÉÊ"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "òÕÓÓËÉÊ"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "û×ÅÄÓËÉÊ"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "UK ËÌÁ×ÉÁÔÕÒÁ"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "US ËÌÁ×ÉÁÔÕÒÁ"
-
-#: ../../keyboard.pm_.c:159
-#, fuzzy
-msgid "Albanian"
-msgstr "éÒÁÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "áÒÍÑÎÓËÉÊ (ÓÔÁÒÙÊ)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "áÒÍÑÎÓËÉÊ (ÍÁÛÉÎÏÐÉÓØ)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "áÒÍÑÎÓËÉÊ (ÆÏÎÅÔÉÞÅÓËÉÊ)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "áÚÅÒÂÁÊÄÖÁÎÓËÉÊ (ÌÁÔÉÎÉÃÁ)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "âÅÌØÇÉÊÓËÉÊ"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "âÏÌÇÁÒÓËÉÊ"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "âÒÁÚÉÌØÓËÉÊ (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "âeÌÏÒÕÓÓËÉÊ"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "û×ÅÊÃÁÒÓËÉÊ (îÅÍÅÃËÁÑ ÒÁÓËÌÁÄËÁ)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "û×ÅÊÃÁÒÓËÉÊ (æÒÁÎÃÕÚÓËÁÑ ÒÁÓËÌÁÄËÁ)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "þÅÛÓËÉÊ (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "îÅÍÅÃËÉÊ (ÂÅÚ ÍÅÒÔ×ÙÈ ËÌÁ×ÉÛ)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "äÁÔÓËÉÊ"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (óûá)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (îÏÒ×ÅÖÓËÉÊ)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "üÓÔÏÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "çÒÕÚÉÎÓËÉÊ (\"òÕÓÓËÁÑ\" ÒÁÓËÌÁÄËÁ)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "çÒÕÚÉÎÓËÉÊ (\"ìÁÔÉÎÓËÁÑ\" ÒÁÓËÌÁÄËÁ)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "çÒÅÞÅÓËÉÊ"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "÷ÅÎÇÅÒÓËÉÊ"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "èÏÒ×ÁÔÓËÉÊ"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "é×ÒÉÔ"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "é×ÒÉÔ (ÆÏÎÅÔÉÞÅÓËÉÊ)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "éÒÁÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "éÓÌÁÎÄÓËÉÊ"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "éÔÁÌØÑÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "ñÐÏÎÓËÉÊ 106 ËÌÁ×ÉÛ"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "ëÏÒÅÊÓËÁÑ ËÌÁ×ÉÁÔÕÒÁ"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "ìÁÔÉÎÏ-áÍÅÒÉËÁÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "ìÉÔÏ×ÓËÉÊ AZERTY (ÓÔÁÒÙÊ)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "ìÉÔÏ×ÓËÉÊ AZERTY (ÎÏ×ÙÊ)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "ìÉÔÏ×ÓËÉÊ \"ÎÏÍÅÒ ÒÑÄÁ\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "ìÉÔÏ×ÓËÉÊ \"ÆÏÎÅÔÉÞÅÓËÉÊ\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "íÅÓÔÏÎÁÈÏÖÄÅÎÉÅ"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "íÁËÅÄÏÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "çÏÌÌÁÎÄÓËÉÊ"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "ðÏÌØÓËÉÊ (ÒÁÓËÌÁÄËÁ qwerty)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "ðÏÌØÓËÉÊ (ÒÁÓËÌÁÄËÁ qwertz)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "ðÏÒÔÕÇÁÌØÓËÉÊ"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "ëÁÎÁÄÓËÉÊ (ë×ÅÂÅË)"
-
-#: ../../keyboard.pm_.c:217
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "òÕÓÓËÉÊ (Yawerty)"
-
-#: ../../keyboard.pm_.c:218
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "òÕÓÓËÉÊ (Yawerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "òÕÓÓËÉÊ (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "óÌÏ×ÅÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "óÌÏ×ÁÃËÉÊ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "óÌÏ×ÁÃËÉÊ (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "áÚÅÒÂÁÊÄÖÁÎÓËÉÊ (ËÉÒÉÌÌÉÃÁ)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "ôÁÊÓËÁÑ ËÌÁ×ÉÁÔÕÒÁ"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "ôÁÊÓËÁÑ ËÌÁ×ÉÁÔÕÒÁ"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "ôÕÒÅÃËÉÊ (ÔÒÁÄÉÃÉÏÎÎÁÑ \"F\" ÍÏÄÅÌØ)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "ôÕÒÅÃËÉÊ (ÓÏ×ÒÅÍÅÎÎÁÑ \"Q\" ÍÏÄÅÌØ)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "õËÒÁÉÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "US ËÌÁ×ÉÁÔÕÒÁ (ÉÎÔÅÒÎÁÃÉÏÎÁÌØÎÁÑ)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "÷ØÅÔÎÁÍÓËÉÊ \"ÞÉÓÌÏ×ÏÊ ÒÑÄ\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "àÇÏÓÌÁ×ÓËÉÊ (ÌÁÔÉÎÉÃÁ/ËÉÒÉÌÌÉÃÁ)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "ãÉËÌÉÞÅÓËÏÅ ÍÏÎÔÉÒÏ×ÁÎÉÅ %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "óÎÁÞÁÌÁ ÕÄÁÌÉÔÅ ÌÏÇÉÞÅÓËÉÅ ÔÏÍÁ\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "íÙÛØ Sun"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "óÔÁÎÄÁÒÔÎÁÑ"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "ïÂÙÞÎÁÑ PS2 ÍÙÛØ Ó ËÏÌÅÓÉËÏÍ"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 ËÎÏÐËÁ"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "ïÂÙÞÎÙÊ"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "ëÏÌÅÓÉËÏ"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÁÑ"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "ïÂÙÞÎÁÑ 2-È ËÎÏÐÏÞÎÁÑ ÍÙÛØ"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "ïÂÙÞÎÁÑ 3-È ËÎÏÐÏÞÎÁÑ ÍÙÛØ"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÁÑ, ÓÔÁÒÙÊ ÔÉÐ C7)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "bus-ÍÙÛØ"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 ËÎÏÐËÉ"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 ËÎÏÐËÉ"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "ÎÉËÁËÏÊ"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "îÅÔ ÍÙÛÉ"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "ðÒÏ×ÅÒØÔÅ ×ÁÛÕ ÍÙÛØ"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "þÔÏÂÙ ÚÁÐÕÓÔÉÔØ ÍÙÛØ,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "ðïëòõôéôå ëïìåóéëï!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "æÉÎÓËÉÊ"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "óÌÅÄÕÀÝÉÊ ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- ðÒÅÄÙÄÕÝÉÊ"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "üÔÏ ×ÅÒÎÏ?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "ðÏÄÓÏÅÄÉÎÉÔØÓÑ Ë éÎÔÅÒÎÅÔ"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"îÁÉÂÏÌÅÅ ÒÁÓÐÒÏÔÓÒÁÎÎÅÎÙÊ ÓÐÏÓÏÂÏ ÓÏÅÄÉÎÉÔØÓÑ ÞÅÒÅÚ adsl - ÐÒÏÇÒÁÍÍÁ pppoe.\n"
-"îÅËÏÔÏÒÙÅ ÓÏÅÄÉÎÅÎÉÑ ÉÓÐÏÌØÚÕÀÔ pptp, ÉÎÏÇÄÁ dhcp.\n"
-"åÓÌÉ ×Ù ÎÅ ÚÎÁÅÔÅ, ×ÙÂÉÒÁÊÔÅ 'ÉÓÐÏÌØÚÏ×ÁÔØ pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "ÉÓÐÏÌØÚÏ×ÁÔØ dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "ÉÓÐÏÌØÚÏ×ÁÔØ pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "use pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"ëÁËÏÇÏ ËÌÉÅÎÔÓËÕÀ ÐÒÏÇÒÁÍÍÕ dhcp ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ?\n"
-"ðÏ ÕÍÏÌÞÁÎÉÀ - dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"îÁ ×ÁÛÅÊ ÓÉÓÔÅÍÅ ÎÅ ÏÂÎÁÒÕÖÅÎÏ ÓÅÔ×ÅÏÇÏ ÁÄÁÐÔÅÒÁ ethernet.\n"
-"îÅ ÍÏÇÕ ÕÓÔÁÎÏ×ÉÔØ ÜÔÏÔ ÔÉÐ ÓÏÅÄÉÎÅÎÉÑ."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "÷ÙÂÏÒ ÓÅÔÅ×ÏÇÏ ÉÎÔÅÒÆÅÊÓÁ"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"÷ÙÂÅÒÉÔÅ ÓÅÔÅ×ÏÊ ÁÄÁÐÔÅÒ, ËÏÔÏÒÙÊ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÄÌÑ ÓÏÅÄÉÎÅÎÉÑ Ó "
-"ÉÎÔÅÒÎÅÔ?"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ÓÅÔÅ×ÙÈ ËÁÒÔ ÎÅ ÎÁÊÄÅÎÏ"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "îÁÓÔÒÏÊËÁ ÓÅÔÉ"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"÷×ÅÄÉÔÅ ÉÍÑ Ó×ÏÅÊ ÍÁÛÉÎÙ (host), ÅÓÌÉ ÚÎÁÅÔÅ ÅÇÏ.\n"
-"îÅËÏÔÏÒÙÍ ÓÅÒ×ÅÒÁÍ DHCP ÉÍÑ ÍÁÛÉÎÙ ÎÅÏÂÈÏÄÉÍÏ ÄÌÑ ÒÁÂÏÔÙ.\n"
-"éÍÑ ×ÁÛÅÊ ÍÁÛÉÎÙ ÄÏÌÖÎÏ ÂÙÔØ ÚÁÄÁÎÏ ÐÏÌÎÏÓÔØÀ,\n"
-"ÎÁÐÒÉÍÅÒ ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "éÍÑ ÍÁÛÉÎÙ"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "íÁÓÔÅÒ ÎÁÓÔÒÏÊËÉ ÓÅÔÉ"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "÷ÎÅÛÎÉÊ ÍÏÄÅÍ ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "÷ÎÕÔÒÅÎÎÑÑ ËÁÒÔÁ ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "ëÁËÏÊ Õ ×ÁÓ ×ÉÄ ISDN ÓÏÅÄÉÎÅÎÉÑ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "ïÂÎÁÒÕÖÅÎÁ ÎÁÓÔÒÏÊËÁ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÉ (firewall)!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "ïÂÎÁÒÕÖÅÎÁ ÎÁÓÔÒÏÊËÁ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÉ (firewall)!"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "îÁÓÔÒÏÊËÁ ISDN"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"÷ÙÂÅÒÉÔÅ ÐÒÏ×ÁÊÄÅÒÁ.\n"
-" åÓÌÉ ÅÇÏ ÎÅÔ × ÓÐÉÓËÅ, ×ÙÂÅÒÉÔÅ îÅÕËÁÚÁÎÎÙÊ"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol"
-msgstr "ðÒÏÔËÏÌ ÚÁÇÒÕÚËÉ"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "å×ÒÏÐÁ (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "ïÓÔÁÌØÎÏÊ ÍÉÒ"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"ïÓÔÁÌØÎÏÊ ÍÉÒ \n"
-" ÂÅÚ D-ËÁÎÁÌÁ (×ÙÄÅÌÅÎÎÙÈ ÌÉÎÉÊ)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "ëÁËÏÊ ÐÒÏÔÏËÏÌ ÂÕÄÅÔ ÉÓÐÏÌØÚÏ×ÁÔØÓÑ ?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "ëÁËÏÊ Õ ×ÁÓ ÔÉÐ ËÁÒÔÙ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "ñ ÎÅ ÚÎÁÀ"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"åÓÌÉ Õ ×ÁÓ ËÁÒÔÁ ISA, ÔÏ ÚÎÁÞÅÎÉÑ ÎÁ ÓÌÅÄÕÀÝÅÍ ÜËÒÁÎÅ ÄÏÌÖÎÙ ÂÙÔØ ×ÅÒÎÙÍÉ.\n"
-"\n"
-"åÓÌÉ Õ ×ÁÓ ËÁÒÔÁ PCMCIA, ÔÏ ×ÁÍ ÎÁÄÏ ÚÎÁÔØ irq É io Ó×ÏÅÊ ËÁÒÔÙ.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "ïÔÍÅÎÉÔØ"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "ðÒÏÄÏÌÖÉÔØ"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "ëÁËÁÑ Õ ×ÁÓ ËÁÒÔÁ ISDN ?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"ïÂÎÁÒÕÖÅÎÁ ËÁÒÔÁ ISDN PCI, ÎÏ ÅÅ ÔÉÐ ÎÅ ÕÄÁÌÏÓØ ÏÐÒÅÄÅÌÉÔØ. ÷ÙÂÅÒÉÔÅ ÎÁ "
-"ÓÌÅÄÕÀÝÅÍ ÜËÒÁÎÅ ËÁÒÔÕ PCI."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "ëÁÒÔÁ ISDN PCI ÎÅ ÏÂÎÁÒÕÖÅÎÁ. ÷ÙÂÅÒÉÔÅ ÅÅ ÎÁ ÓÌÅÄÕÀÝÅÍ ÜËÒÁÎÅ."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "÷ÙÂÅÒÉÔÅ, Ë ËÁËÏÍÕ ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÏÍÕ ÐÏÒÔÕ ÐÏÄËÌÀÞÅÎ ÍÏÄÅÍ."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "ðÁÒÁÍÅÔÒÙ ÄÏÚ×ÏÎÁ"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "éÍÑ ÓÏÅÄÉÎÅÎÉÑ"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "îÏÍÅÒ ÔÅÌÅÆÏÎÁ"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "éÍÑ (Login ID)"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "ÎÁ ÂÁÚÅ ÓËÒÉÐÔÁ"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "ÎÁ ÂÁÚÅ ÔÅÒÍÉÎÁÌÁ"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "éÍÑ ÄÏÍÅÎÁ"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "ðÅÒ×ÙÊ ÓÅÒ×ÅÒ DNS (ÎÅÏÂÑÚÁÔÅÌØÎÏ)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "÷ÔÏÒÏÊ ÓÅÒ×ÅÒ DNS (ÎÅÏÂÑÚÁÔÅÌØÎÏ)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"÷Ù ÍÏÖÅÔÅ ÏÔÓÏÅÄÉÎÉÔØÓÑ ÉÌÉ ÐÅÒÅÎÁÓÔÒÏÉÔØ ×ÁÛÅ ÓÏÅÄÉÎÅÎÉÅ."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"÷Ù ÍÏÖÅÔÅ ÐÅÒÅÎÁÓÔÒÏÉÔØ ×ÁÛÅ ÓÏÅÄÉÎÅÎÉÅ."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "÷ ÄÁÎÎÙÊ ÍÏÍÅÎÔ ×Ù ÓÏÅÄÉÎÅÎÙ Ó ÉÎÔÅÒÎÅÔ."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"÷Ù ÍÏÖÅÔÅ ÓÏÅÄÉÎÉÔØÓÑ Ó ÉÎÔÅÒÎÅÔ ÉÌÉ ÐÅÒÅÎÁÓÔÒÏÉÔØ ×ÁÛÅ ÓÏÅÄÉÎÅÎÉÅ."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "÷ ÄÁÎÎÙÊ ÍÏÍÅÎÔ ×Ù ÎÅ ÓÏÅÄÉÎÅÎÙ Ó ÉÎÔÅÒÎÅÔ."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "ðÏÄÓÏÅÄÉÎÉÔØÓÑ Ë éÎÔÅÒÎÅÔ"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "ïÔÓÏÅÄÉÎÉÔØÓÑ ÏÔ éÎÔÅÒÎÅÔ"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "îÁÓÔÒÏÉÔØ ÓÅÔÅ×ÏÅ ÓÏÅÄÉÎÅÎÉÅ (ÌÏËÁÌØÎÁÑ ÓÅÔØ ÉÌÉ ÉÎÔÅÒÎÅÔ)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "óÏÅÄÉÎÅÎÉÅ éÎÔÅÒÎÅÔ É ÎÁÓÔÒÏÊËÁ"
-
-#: ../../network/netconnect.pm_.c:96
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"÷Ù ÍÏÖÅÔÅ ÏÔÓÏÅÄÉÎÉÔØÓÑ ÉÌÉ ÐÅÒÅÎÁÓÔÒÏÉÔØ ×ÁÛÅ ÓÏÅÄÉÎÅÎÉÅ."
-
-#: ../../network/netconnect.pm_.c:105
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"÷Ù ÍÏÖÅÔÅ ÏÔÓÏÅÄÉÎÉÔØÓÑ ÉÌÉ ÐÅÒÅÎÁÓÔÒÏÉÔØ ×ÁÛÅ ÓÏÅÄÉÎÅÎÉÅ."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "ëÏÎÆÉÇÕÒÁÃÉÑ ÓÅÔÉ"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"ðÏÓËÏÌØËÕ ×Ù ÄÅÌÁÅÔÅ ÕÓÔÁÎÏ×ËÕ ÓÅÔÉ, ×ÁÛÁ ÓÅÔØ ÕÖÅ ÎÁÓÔÒÏÅÎÁ.\n"
-"îÁÖÍÉÔÅ Ok ÞÔÏÂÙ ÏÓÔÁ×ÉÔØ ÔÅËÕÝÉÅ ÎÁÓÔÒÏÊËÉ, ÉÌÉ ïÔÍÅÎÉÔØ, ÞÔÏÂÙ "
-"ÐÅÒÅÎÁÓÔÒÏÉÔØ ×ÁÛÅ ÓÏÅÄÉÅÎÉÅ Ó ÉÎÔÅÒÎÅÔ É ÌÏËÁÌØÎÏÊ ÓÅÔØÀ.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"äÏÂÒÏ ÐÏÖÁÌÏ×ÁÔØ × íÁÓÔÅÒ ÎÁÓÔÒÏÊËÉ ÓÅÔÉ\n"
-"\n"
-"óÅÊÞÁÓ ÍÙ ÎÁÓÔÒÏÉÍ ×ÁÛÅ ÓÏÅÄÉÎÅÎÉÅ Ó ÉÎÔÅÒÎÅÔ É/ÉÌÉ ÌÏËÁÌØÎÏÊ ÓÅÔØÀ.\n"
-"åÓÌÉ ×Ù ÎÅ ÈÏÔÉÔÅ ÓÉÐÏÌØÚÏ×ÁÔØ Á×ÔÏÏÐÒÅÄÅÌÅÎÉÅ, ÏÔÍÅÎÉÔÅ ÇÁÌÏÞËÕ.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "÷ÙÂÅÒÉÔÅ ÐÒÏÆÉÌØ ÄÌÑ ÎÁÓÔÒÏÊËÉ"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "éÓÐÏÌØÚÏ×ÁÔØ Á×ÔÏÏÐÒÅÄÅÌÅÎÉÅ"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "ïÐÒÅÄÅÌÅÎÉÅ ÕÓÔÒÏÊÓÔ×..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "ïÂÙÞÎÏÅ ÍÏÄÅÍÎÏÅ ÓÏÅÄÉÎÅÎÉÅ"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "ÎÁÊÄÅÎ ÎÁ ÐÏÒÔÕ %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN ÓÏÅÄÉÎÅÎÉÅ"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "ÎÁÊÄÅÎÏ %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, fuzzy
-msgid "ADSL connection"
-msgstr "óÏÅÄÉÎÅÎÉÅ ÐÏ ÌÏËÁÌØÎÏÊ ÓÅÔÉ"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "ÏÂÎÁÒÕÖÅÎ ÎÁ ÉÎÔÅÒÆÅÊÓÅ %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "ëÁÂÅÌØÎÏÅ ÓÏÅÄÉÎÅÎÉÅ"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-#, fuzzy
-msgid "cable connection detected"
-msgstr "ëÁÂÅÌØÎÏÅ ÓÏÅÄÉÎÅÎÉÅ"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "óÏÅÄÉÎÅÎÉÅ ÐÏ ÌÏËÁÌØÎÏÊ ÓÅÔÉ"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "ÏÂÎÁÒÕÖÅÎÁ ÏÄÎÁ ÉÌÉ ÎÅÓËÏÌØËÏ ÓÅÔÅ×ÁÈ ËÁÒÔ ethernet"
-
-#: ../../network/netconnect.pm_.c:190
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "÷ÙÂÅÒÉÔÅ ÐÒÏÇÒÁÍÍÕ, ËÏÔÏÒÙÊ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:215
-#, fuzzy
-msgid "Internet connection"
-msgstr "òÁÚÄÅÌÅÎÉÅ ÉÎÔÅÒÎÅÔ-ÓÏÅÄÉÎÅÎÉÑ"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "èÏÔÉÔÅ ÌÉ ×Ù, ÞÔÏÂÙ ×ÁÛÅ ÓÏÅÄÉÎÅÎÉÅ ÚÁÐÕÓËÁÌÏÓØ ÐÒÉ ÚÁÇÒÕÚËÅ?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÓÅÔÉ"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"÷ÏÚÎÉËÌÁ ÐÒÏÂÌÅÍÁ ÐÒÉ ÐÅÒÅÚÁÐÕÓËÅ ÓÅÔÉ: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"ðÏÚÄÒÁ×ÌÑÅÍ, ÎÁÓÔÒÏÊËÁ ÓÅÔÉ É ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ ÚÁ×ÅÒÛÅÎÁ.\n"
-"\n"
-"óÅÊÞÁÓ ÂÕÄÕÔ ÓÄÅÌÁÎÙ ÉÚÍÅÎÅÎÉÑ × ×ÁÛÅÊ ÓÉÓÔÅÍÅ.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"ðÏÓÌÅ ÜÔÏÇÏ ÍÙ ÒÅËÏÍÅÎÄÕÅÍ ÐÅÒÅÚÁÐÕÓÔÉÔØ ×ÁÛ X ÓÅÒ×ÅÒ, \n"
-"ÞÔÏÂÙ ÉÚÂÅÖÁÔØ ÐÒÏÂÌÅÍ ÉÚ-ÚÁ ÓÍÅÎÙ ÉÍÅÎÉ ËÏÍÐØÀÔÅÒÁ."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"÷îéíáîéå: üÔÏ ÕÓÔÒÏÊÓÔ×Ï ÒÁÎÅÅ ÂÙÌÏ ÓËÏÎÆÉÇÕÒÉÒÏ×ÁÎÏ ÄÌÑ ÐÏÄËÌÀÞÅÎÉÑ Ë "
-"ÉÎÔÅÒÎÅÔ.\n"
-"ðÒÏÓÔÏ ÏÓÔÁ×ØÔÅ ÜÔÏ ÕÓÔÒÏÊÓÔ×Ï ÎÁÓÔÒÏÅÎÎÙÍ.\n"
-"éÚÍÅÎÅÎÉÅ ÐÏÌÅÊ ×ÎÉÚÕ ÉÚÍÅÎÉÔ ÐÒÅÄÙÄÕÝÕÀ ÎÁÓÔÒÏÊËÕ."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"ðÏÖÁÌÕÊÓÔÁ ××ÅÄÉÔÅ IP ËÏÎÆÉÇÕÒÁÃÉÀ ÄÌÑ ×ÁÛÅÊ ÍÁÛÉÎÙ.\n"
-"ëÁÖÄÙÊ ÐÕÎËÔ ÄÏÌÖÅÎ ÂÙÔØ ÚÁÐÏÌÎÅÎ ËÁË IP ÁÄÒÅÓ × ÄÅÓÑÔÉÞÎÏ-ÔÏÞÅÞÎÏÊ \n"
-"ÎÏÔÁÃÉÉ (ÎÁÐÒÉÍÅÒ, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "îÁÓÔÒÏÊËÁ ÓÅÔÅ×ÏÇÏ ÕÓÔÒÏÊÓÔ×Á %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr "(driver %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP ÁÄÒÅÓ"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "íÁÓËÁ ÓÅÔÉ"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "á×ÔÏÍÁÔÉÞÅÓËÉÊ IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ÁÄÒÅÓ ÄÏÌÖÅÎ ÂÙÔØ × ÆÏÒÍÁÔÅ 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"÷×ÅÄÉÔÅ ÉÍÑ Ó×ÏÅÊ ÍÁÛÉÎÙ (host).\n"
-"éÍÑ ×ÁÛÅÊ ÍÁÛÉÎÙ ÄÏÌÖÎÏ ÂÙÔØ ÚÁÄÁÎÏ ÐÏÌÎÏÓÔØÀ,\n"
-"ÎÁÐÒÉÍÅÒ ``mybox.mylab.myco.com''.\n"
-"÷Ù ÍÏÖÅÔÅ ÔÁËÖÅ ××ÅÓÔÉ IP ÁÄÒÅÓ ÛÌÀÚÁ, ÅÓÌÉ ÏÎ Õ ×ÁÓ ÅÓÔØ"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS ÓÅÒ×ÅÒ"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "ûÌÀÚ"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "ûÌÀÚÏ×ÏÅ ÕÓÔÒÏÊÓÔ×Ï"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "îÁÓÔÒÏÊËÁ proxy"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Proxy ÄÏÌÖÎÏ ÂÙÔØ http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Proxy ÄÏÌÖÎÏ ÂÙÔØ ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "îÁÓÔÒÏÊËÁ éÎÔÅÒÎÅÔ"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "èÏÔÉÔÅ ×ÏÊÔÉ × ÉÎÔÅÒÎÅÔ ÓÅÊÞÁÓ?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "ðÒÏ×ÅÒËÁ ×ÁÛÅÇÏ ÓÏÅÄÉÎÅÎÉÑ..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "óÅÊÞÁÓ ÓÉÓÔÅÍÁ ÓÏÅÄÉÎÅÎÁ Ó éÎÔÅÒÎÅÔ."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "éÚ ÓÏÏÂÒÁÖÅÎÉÊ ÂÅÚÏÐÁÓÎÏÓÔÉ, ÓÏÅÄÉÎÅÎÉÅ ÂÕÄÅÔ ÓÅÊÞÁÓ ÒÁÚÏÒ×ÁÎÏ"
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"ðÏÈÏÖÅ, ÓÉÓÔÅÍÁ ÎÅ ×ÏÛÌÁ × ÉÎÔÅÒÎÅÔ.\n"
-"ðÏÐÒÏÂÕÊÔÅ ÎÁÓÔÒÏÉÔØ ÓÏÅÄÉÎÅÎÉÅ."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÓÏÅÄÉÎÅÎÉÑ"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "úÁÐÏÌÎÉÔÅ ÉÌÉ ÐÒÏ×ÅÒØÔÅ ÐÏÌÅ ×ÎÉÚÕ"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ ËÁÒÔÙ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "áÄÒÅÓ (DMA) ËÁÒÔÙ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "IO ËÁÒÔÙ"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "IO_0 ËÁÒÔÙ"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "IO_1 ËÁÒÔÙ"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "÷ÁÛ ÌÉÞÎÙÊ ÔÅÌÅÆÏÎÎÙÊ ÎÏÍÅÒ"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "éÍÑ ÐÒÏ×ÁÊÄÅÒÁ (ÎÁÐÒ. provider.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "îÏÍÅÒ ÔÅÌÅÆÏÎÁ ÐÒÏ×ÁÊÄÅÒÁ"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "IP ÁÄÒÅÓ ÐÅÒ×ÏÇÏ DNS ÓÅÒ×ÅÒÁ ÐÒÏ×ÁÊÄÅÒÁ (ÎÅÏÂÑÚÁÔÅÌØÎÏ)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "IP ÁÄÒÅÓ ×ÔÏÒÏÇÏ DNS ÓÅÒ×ÅÒÁ ÐÒÏ×ÁÊÄÅÒÁ (ÎÅÏÂÑÚÁÔÅÌØÎÏ)"
-
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "÷ÙÂÏÒ ËÌÁ×ÉÁÔÕÒÙ"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "òÅÖÉÍ ÄÏÚ×ÏÎÁ"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-#, fuzzy
-msgid "Connection speed"
-msgstr "ôÉÐ ÓÏÅÄÉÎÅÎÉÑ: "
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "ôÉÐ ÓÏÅÄÉÎÅÎÉÑ: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "÷ÈÏÄ (ÉÍÑ ÐÏÌØÚÏ×ÁÔÅÌÑ)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "ðÁÒÏÌØ"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "òÁÓÛÉÒÅÎÎÙÅ ÒÁÚÄÅÌÙ ÎÅ ÐÏÄÄÅÒÖÉ×ÁÀÔÓÑ ÎÁ ÜÔÏÊ ÐÌÁÔÆÏÒÍÅ"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"õ ×ÁÓ ÅÓÔØ ÄÙÒÁ × ÔÁÂÌÉÃÅ ÒÁÚÄÅÌÏ×, ÎÏ Ñ ÎÅ ÍÏÇÕ ÅÅ ÉÓÐÏÌØÚÏ×ÁÔØ.\n"
-"åÄÉÎÓÔ×ÅÎÎÙÊ ×ÙÈÏÄ ÓÏÓÔÏÉÔ × ÔÏÍ, ÞÔÏÂÙ ÐÅÒÅÄ×ÉÎÕÔØ ÐÅÒ×ÉÞÎÙÅ ÒÁÚÄÅÌÙ ÔÁË, "
-"ÞÔÏÂÙ ÄÙÒÁ ÛÌÁ ÓÒÁÚÕ ÚÁ ÒÁÓÛÉÒÅÎÎÙÍ (extended) ÒÁÚÄÅÌÏÍ"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "÷ÏÓÓÔÁÎÏ×ÌÅÎÉÅ ÉÚ ÆÁÊÌÁ %s ÐÒÏ×ÁÌÉÌÏÓØ %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "ðÌÏÈÏÊ ÆÁÊÌ Ó ÒÅÚÅÒ×ÎÏÊ ËÏÐÉÅÊ"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "ïÛÉÂËÁ ÚÁÐÉÓÉ × ÆÁÊÌ %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"þÔÏ-ÔÏ ÐÌÏÈÏÅ ÐÒÏÉÓÈÏÄÉÔ ÎÁ ×ÁÛÅÍ ÄÉÓËÅ. \n"
-"ôÅÓÔ ÎÁ ÃÅÌÏÓÔÎÏÓÔØ ÄÁÎÎÙÈ ÎÅ ÐÒÏÛÅÌ. \n"
-"üÔÏ ÏÚÎÁÞÁÅÔ, ÞÔÏ ÚÁÐÉÓØ ÉÎÆÏÒÍÁÃÉÉ ÎÁ ÜÔÏÔ ÄÉÓË ÚÁËÏÎÞÉÔÓÑ ÇÏÒÏÊ ÍÕÓÏÒÁ"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ÏÂÑÚÁÔÅÌØÎÏ"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "×ÁÖÎÏ"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "×ÅÓØÍÁ ÖÅÌÁÔÅÌØÎÏ"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "ÖÅÌÁÔÅÌØÎÏ"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ÍÏÖÎÏ É ÜÔÏ"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "ìÏËÁÌØÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "õÄÁÌÅÎÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "õÄÁÌÅÎÎÙÊ CUPS ÓÅÒ×ÅÒ"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "õÄÁÌÅÎÎÙÊ lpd ÓÅÒ×ÅÒ"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "óÅÔÅ×ÏÊ ÐÒÉÎÔÅÒ (ÓÏËÅÔ)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "óÅÒ×ÅÒ ÐÅÞÁÔÉ"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "áÄÒÅÓ ÕÓÔÒÏÊÓÔ×Á ÐÅÞÁÔÉ"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(ÍÏÄÕÌØ %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "÷ÙÂÏÒ ÔÉÐÁ ÐÏÄËÌÀÞÅÎÉÑ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "ëÁË ÐÏÄÓÏÅÄÉÎÅÎ ×ÁÛ ÐÒÉÎÔÅÒ?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"ó ÕÄÁÌÅÎÎÙÍ ÓÅÒ×ÅÒÏÍ ÐÅÞÁÔÉ CUPS, ×ÁÍ ÎÅ ÎÕÖÎÏ ÚÄÅÓØ ÎÁÓÔÒÁÉ×ÁÔØ\n"
-"ÎÉËÁËÉÈ ÐÒÉÎÔÅÒÏ×; ÐÒÉÎÔÅÒÙ ÂÕÄÕÔ ÏÂÎÁÒÕÖÅÎÙ Á×ÔÏÍÁÔÉÞÅÓËÉ.\n"
-"åÓÌÉ ÓÏÍÎÅ×ÁÅÔÅÓØ, ×ÙÂÅÒÉÔÅ \"õÄÁÌÅÎÎÙÊ CUPS ÓÅÒ×ÅÒ\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-#, fuzzy
-msgid "None"
-msgstr "çÏÔÏ×Ï"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "÷ÙÂÅÒÉÔÅ ÐÏÌØÚÏ×ÁÔÅÌÑ ÐÏ ÕÍÏÌÞÁÎÉÀ:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "úÁËÒÙÔØ"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "õÄÁÌÅÎÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ÁÄÒÅÓ ÄÏÌÖÅÎ ÂÙÔØ × ÆÏÒÍÁÔÅ 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "îÏÍÅÒ ÐÏÒÔÁ ÄÏÌÖÅÎ ÓÏÓÔÏÑÔØ ÉÚ ÃÉÆÒ"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "ìÏËÁÌØÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "IP ÓÅÒ×ÅÒÁ CUPS"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "ðÏÒÔ"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "îÁÓÔÒÏÊËÁ ×ÉÄÁ ÚÁÇÒÕÚËÉ"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "ïÐÒÅÄÅÌÅÎÉÅ ÕÓÔÒÏÊÓÔ×..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "ðÒÏ×ÅÒÉÔØ ÐÏÒÔÙ"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "ðÒÉÎÔÅÒ ÍÏÄÅÌÉ \"%s\" ÏÂÎÁÒÕÖÅÎ ÎÁ "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "ìÏËÁÌØÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"ë ËÁËÏÍÕ ÕÓÔÒÏÊÓÔ×Õ ÐÏÄËÌÀÞÅÎ ×ÁÛ ÐÒÉÎÔÅÒ \n"
-"(ÐÏÍÎÉÔÅ? - /dev/lp0 ÜË×É×ÁÌÅÎÔÅÎ LPT1:)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "ðÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "þÔÅÎÉÅ ÂÁÚÙ ÄÒÁÊ×ÅÒÏ× CUPS..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "ïÐÃÉÉ ÕÄÁÌÅÎÎÏÇÏ ÐÒÉÎÔÅÒÁ lpd"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"äÌÑ ÉÓÐÏÌØÚÏ×ÁÎÉÑ ÕÄÁÌÅÎÎÏÊ ÏÞÅÒÅÄÉ ÐÅÞÁÔÉ ×ÁÍ ÎÕÖÎÏ ÕËÁÚÁÔØ ÉÍÑ ÕÄÁÌÅÎÎÏÇÏ "
-"ÓÅÒ×ÅÒÁ ÐÅÞÁÔÉ É ÉÍÑ ÏÞÅÒÅÄÉ ÐÅÞÁÔÉ ÎÁ ÜÔÏÍ ÓÅÒ×ÅÒÅ, × ËÏÔÏÒÕÀ ÕÄÁÌÅÎÎÙÊ "
-"ÓÅÒ×ÅÒ ÂÕÄÅÔ ÐÏÍÅÝÁÔØ ÚÁÄÁÎÉÑ ÎÁ ÐÅÞÁÔØ."
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "õÄÁÌÅÎÎÁÑ ÍÁÛÉÎÁ"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "õÄÁÌÅÎÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:320
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "õÄÁÌÅÎÎÁÑ ÍÁÛÉÎÁ"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "õÄÁÌÅÎÎÁÑ ÍÁÛÉÎÁ"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "ïÐÃÉÉ ÐÒÉÎÔÅÒÁ SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"äÌÑ ÐÅÞÁÔÉ ÎÁ ÐÒÉÎÔÅÒÅ SMB ×ÁÍ ÎÅÏÂÈÏÄÉÍÏ ÕËÁÚÁÔØ ÉÍÑ ÈÏÓÔÁ SMB (ÎÅ ×ÓÅÇÄÁ "
-"ÓÏ×ÐÁÄÁÅÔ Ó ÉÍÅÎÅÍ × ÓÅÔÉ TCP/IP) É ÁÄÒÅÓ IP ÓÅÒ×ÅÒÁ ÐÅÞÁÔÉ, Á ÔÁËÖÅ ÉÍÑ "
-"ÒÅÓÕÒÓÁ, Ó×ÑÚÁÎÎÏÅ Ó ×ÙÂÒÁÎÎÙÍ ÐÒÉÎÔÅÒÏÍ, ÉÍÑ ÐÏÌØÚÏ×ÁÔÅÌÑ, ÐÁÒÏÌØ É "
-"ÉÎÆÏÒÍÁÃÉÀ Ï ÒÁÂÏÞÅÊ ÇÒÕÐÐÅ."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "óÅÒ×ÅÒ SMB"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "IP ÓÅÒ×ÅÒÁ SMB"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "éÍÑ ÒÅÓÕÒÓÁ"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "òÁÂÏÞÁÑ ÇÒÕÐÐÁ"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "ïÐÃÉÉ ÐÒÉÎÔÅÒÁ NetWare"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"äÌÑ ÐÅÞÁÔÉ ÎÁ ÐÒÉÎÔÅÒ NetWare ×ÁÍ ÎÅÏÂÈÏÄÉÍÏ ÕËÁÚÁÔØ ÉÍÑ ÓÅÒ×ÅÒÁ ÐÅÞÁÔÉ "
-"NetWare (ÎÅ ×ÓÅÇÄÁ ÓÏ×ÐÁÄÁÅÔ Ó ÉÍÅÎÅÍ × ÓÅÔÉ TCP/IP) É ÉÍÑ ÏÞÅÒÅÄÉ, "
-"ÓÏÏÔ×ÅÔÓÔ×ÕÀÝÅÊ ×ÙÂÒÁÎÎÏÍÕ ÐÒÉÎÔÅÒÕ, Á ÔÁËÖÅ ÉÍÑ ÐÏÌØÚÏ×ÁÔÅÌÑ É ÐÁÒÏÌØ."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "óÅÒ×ÅÒ ÐÅÞÁÔÉ"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "éÍÑ ÏÞÅÒÅÄÉ ÐÅÞÁÔÉ"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "ïÐÃÉÉ ÐÒÉÎÔÅÒÁ Socket"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "éÍÑ ÍÁÛÉÎÙ Ó ÐÒÉÎÔÅÒÏÍ"
-
-#: ../../printerdrake.pm_.c:537
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "éÍÑ ÍÁÛÉÎÙ Ó ÐÒÉÎÔÅÒÏÍ"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "áÄÒÅÓ ÕÓÔÒÏÊÓÔ×Á ÐÅÞÁÔÉ"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "éÍÑ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "ïÐÉÓÁÎÉÅ"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "íÅÓÔÏÎÁÈÏÖÄÅÎÉÅ"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "þÔÅÎÉÅ ÂÁÚÙ ÄÒÁÊ×ÅÒÏ× CUPS..."
-
-#: ../../printerdrake.pm_.c:793
-#, fuzzy
-msgid "Printer model selection"
-msgstr "ðÏÄËÌÀÞÅÎÉÅ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:794
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "ëÁËÏÊ Õ ×ÁÓ ÔÉÐ ÐÒÉÎÔÅÒÁ?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "îÁÓÔÒÏÊËÁ éÎÔÅÒÎÅÔ"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "îÁÓÔÒÏÊËÁ éÎÔÅÒÎÅÔ"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "èÏÔÉÔÅ ×ÙÐÏÌÎÉÔØ ÐÒÏÂÎÕÀ ÐÅÞÁÔØ?"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "ðÒÏ×ÅÒÉÔØ ÐÏÒÔÙ"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-#, fuzzy
-msgid "No test pages"
-msgstr "äÁ, ÎÁÐÅÞÁÔÁÔØ ÏÂÅ ÐÒÏÂÎÙÅ ÓÔÒÁÎÉÃÙ ÔÅËÓÔÁ"
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "ðÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "óÔÁÎÄÁÒÔÎÁÑ"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "ðÅÞÁÔØ ÔÅÓÔÏ×ÙÈ ÓÔÒÁÎÉÃ..."
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "ðÅÞÁÔØ ÔÅÓÔÏ×ÙÈ ÓÔÒÁÎÉÃ..."
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "ðÅÞÁÔØ ÔÅÓÔÏ×ÙÈ ÓÔÒÁÎÉÃ..."
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"ðÒÏÂÎÙÅ ÓÔÒÁÎÉÃÙ ÏÔÐÒÁ×ÌÅÎÙ ÄÅÍÏÎÕ ÐÅÞÁÔÉ.\n"
-"ðÒÅÖÄÅ ÞÅÍ ÐÒÉÎÔÅÒ ÚÁÒÁÂÏÔÁÅÔ ÍÏÖÅÔ ÐÒÏÊÔÉ ÎÅËÏÔÏÒÏÅ ×ÒÅÍÑ.\n"
-"óÔÁÔÕÓ ÐÅÞÁÔÉ:\n"
-"%s\n"
-"\n"
-"ïÎ ÒÁÂÏÔÁÅÔ ÎÏÒÍÁÌØÎÏ?"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"ðÒÏÂÎÙÅ ÓÔÒÁÎÉÃÙ ÏÔÐÒÁ×ÌÅÎÙ ÄÅÍÏÎÕ ÐÅÞÁÔÉ.\n"
-"ðÒÅÖÄÅ ÞÅÍ ÐÒÉÎÔÅÒ ÚÁÒÁÂÏÔÁÅÔ ÍÏÖÅÔ ÐÒÏÊÔÉ ÎÅËÏÔÏÒÏÅ ×ÒÅÍÑ.\n"
-"ïÎ ÒÁÂÏÔÁÅÔ ÎÏÒÍÁÌØÎÏ?"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "îÅÔ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "äÅÁËÔÉ×ÉÚÁÃÉÑ ÓÅÔÉ"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "ðÁÒÁÍÅÔÒÙ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "þÔÅÎÉÅ ÂÁÚÙ ÄÒÁÊ×ÅÒÏ× CUPS..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "îÁÓÔÒÏÊËÁ éÎÔÅÒÎÅÔ"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "éÍÑ ÐÒÉÎÔÅÒÁ ÄÏÌÖÎÏ ÓÏÄÅÒÖÁÔØ ÔÏÌØËÏ ÂÕË×Ù, ÃÉÆÒÙ É ÐÏÄÞÅÒËÉ×ÁÎÉÅ"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "îÅÔ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "þÔÅÎÉÅ ÂÁÚÙ ÄÒÁÊ×ÅÒÏ× CUPS..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "úÁÐÕÓË ÷ÁÛÅÇÏ ÓÏÅÄÉÎÅÎÉÑ..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "îÁÓÔÒÏÊËÁ ÓÅÔÉ"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "íÏÎÉÔÏÒ ÎÅ ÎÁÓÔÒÏÅÎ"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "îÁÓÔÒÏÊËÁ ÓÅÔÉ"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "ëÁËÕÀ ÓÉÓÔÅÍÕ ÐÅÞÁÔÉ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ?"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "÷ÙÓÏËÉÊ"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "ðÁÒÁÎÏÉÄÁÌØÎÙÊ"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "ëÁËÕÀ ÓÉÓÔÅÍÕ ÐÅÞÁÔÉ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "÷ÙÂÏÒ ÔÉÐÁ ÐÏÄËÌÀÞÅÎÉÑ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1728
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "ëÁËÕÀ ÓÉÓÔÅÍÕ ÐÅÞÁÔÉ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "îÁÓÔÒÏÉÔØ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "ðÁÒÁÍÅÔÒÙ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "þÔÅÎÉÅ ÂÁÚÙ ÄÒÁÊ×ÅÒÏ× CUPS..."
-
-#: ../../printerdrake.pm_.c:1845
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "èÏÔÉÔÅ ÎÁÓÔÒÏÉÔØ ÐÒÉÎÔÅÒ?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "îÏÒÍÁÌØÎÙÊ ÒÅÖÉÍ"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (õÍÏÌÞÁÎÉÅ)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "õÄÁÌÅÎÎÙÊ CUPS ÓÅÒ×ÅÒ"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "õÄÁÌÅÎÎÙÊ CUPS ÓÅÒ×ÅÒ"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-#, fuzzy
-msgid "Add printer"
-msgstr "îÅÔ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "èÏÔÉÔÅ ÐÒÏÔÅÓÔÉÒÏ×ÁÔØ ÎÁÓÔÒÏÊËÉ?"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "îÁÓÔÒÏÊËÁ éÎÔÅÒÎÅÔ"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "òÁÚÄÅÌÅÎÉÅ ÉÎÔÅÒÎÅÔ-ÓÏÅÄÉÎÅÎÉÑ"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "ðÏÄËÌÀÞÅÎÉÅ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "ðÅÞÁÔØ ÔÅÓÔÏ×ÙÈ ÓÔÒÁÎÉÃ..."
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "õÄÁÌÅÎÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "þÔÅÎÉÅ ÂÁÚÙ ÄÒÁÊ×ÅÒÏ× CUPS..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "÷Ù ÈÏÔÉÔÅ ÐÅÒÅÚÁÐÕÓÔÉÔØ ÓÅÔØ"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "þÔÅÎÉÅ ÂÁÚÙ ÄÒÁÊ×ÅÒÏ× CUPS..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "îÁÓÔÒÏÊËÁ proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "ðÏÒÔ"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Proxy ÄÏÌÖÎÏ ÂÙÔØ http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "îÏÍÅÒ ÐÏÒÔÁ ÄÏÌÖÅÎ ÓÏÓÔÏÑÔØ ÉÚ ÃÉÆÒ"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Proxy ÄÏÌÖÎÏ ÂÙÔØ ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "á×ÔÏ-×ÈÏÄ"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "ðÁÒÏÌØ"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "îÅÔ ÐÁÒÏÌÑ"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "ðÁÒÏÌÉ ÎÅ ÓÏ×ÐÁÄÁÀÔ"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "îÅ ÍÏÇÕ ÄÏÂÁ×ÉÔØ ÒÁÚÄÅÌ ÎÁ _ÏÔÆÏÒÍÁÔÉÒÏ×ÁÎÎÙÊ_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "îÅ ÍÏÇÕ ÐÉÓÁÔØ × ÆÁÊÌ %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ÎÅ ÓÒÁÂÏÔÁÌ"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ÎÅ ÓÒÁÂÏÔÁÌ (×ÏÚÍÏÖÎÏ, ÎÅÔ raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "îÅÄÏÓÔÁÔÏÞÎÏ ÒÁÚÄÅÌÏ× ÄÌÑ RAID ÕÒÏ×ÎÑ %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-"úÁÐÕÓÔÉÔØ ALSA (òÁÓÛÉÒÅÎÎÁÑ Ú×ÕËÏ×ÁÑ ÁÒÈÉÔÅËÔÕÒÁ Linux) Ú×ÕËÏ×ÕÀ ÓÉÓÔÅÍÕ"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, ÐÌÁÎÉÒÏ×ÝÉË ÄÌÑ ÐÏ×ÔÏÒÑÀÝÉÈÓÑ ÐÏ ÇÒÁÆÉËÕ ËÏÍÁÎÄ."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd ÉÓÐÏÌØÚÕÅÔÓÑ ÄÌÑ ÏÔÓÌÅÖÉ×ÁÎÉÑ ÓÏÓÔÏÑÎÉÑ ÂÁÔÁÒÅÊ É ×ÅÄÅÎÉÑ ÐÒÏÔÏËÏÌÁ "
-"ÞÅÒÅÚ syslog.\n"
-"ôÁËÖÅ ÍÏÖÅÔ ÂÙÔØ ÉÓÐÏÌØÚÏ×ÁÎ ÄÌÑ ×ÙËÌÀÞÅÎÉÑ ÍÁÛÉÎÙ ÐÒÉ ÓÉÌØÎÏÍ ÒÁÚÒÑÄÅ "
-"ÂÁÔÁÒÅÊ."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"úÁÐÕÓËÁÅÔ ËÏÍÁÎÄÙ, ×ÎÅÓÅÎÎÙÅ × ÒÁÓÐÉÓÁÎÉÅ ËÏÍÁÎÄÏÊ at ×Ï ×ÒÅÍÑ, ÕËÁÚÁÎÎÏÅ "
-"ÐÒÉ\n"
-"ÚÁÐÕÓËÅ at, É ×ÙÐÏÌÎÑÅÔ ÐÁËÅÔÙ ËÏÍÁÎÄ, ËÏÇÄÁ ÓÒÅÄÎÑÑ ÚÁÇÒÕÚËÁ ÄÏÓÔÁÔÏÞÎÏ "
-"ÎÉÚËÁ."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron Ñ×ÌÑÅÔÓÑ ÓÔÁÎÄÁÒÔÎÏÊ ÐÒÏÇÒÁÍÍÏÊ UNIX, ËÏÔÏÒÁÑ ÚÁÐÕÓËÁÅÔ ÕËÁÚÁÎÎÙÅ "
-"ÐÏÌØÚÏ×ÁÔÅÌÑÍ\n"
-"ÐÒÏÇÒÁÍÍÙ ÐÏ ÒÁÓÐÉÓÁÎÉÀ. vixie cron ÄÏÂÁ×ÌÑÅÔ ÎÏ×ÙÅ Ó×ÏÊÓÔ×Á Ë ÉÓÈÏÄÎÏÍÕ "
-"cron ÉÚ \n"
-"UNIX, ×ËÌÀÞÁÑ ÌÕÞÛÕÀ ÂÅÚÏÐÁÓÎÏÓÔØ É ÂÏÌÅÅ ÍÏÝÎÙÅ ÐÁÒÁÍÅÔÒÙ ÎÁÓÔÒÏÊËÉ."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ÄÏÂÁ×ÌÑÅÔ ÐÏÄÄÅÒÖËÕ ÍÙÛÉ ÄÌÑ ÐÒÉÌÏÖÅÎÉÊ, ÒÁÂÏÔÁÀÝÉÈ × ÔÅËÓÔÏ×ÏÍ ÒÅÖÉÍÅ, "
-"ÔÁËÉÈ ,ËÁË \n"
-"Midnight Commander. ðÏÄÄÅÒÖÉ×ÁÅÔÓÑ ÔÁËÖÅ ÏÐÅÒÁÃÉÉ ÍÙÛØÀ ×ÙÒÅÚÁÔØ-É-×ÓÔÁ×ÉÔØ "
-"É ×ÓÐÌÙ×ÁÀÝÉÅ ÍÅÎÀ × \n"
-"ËÏÎÓÏÌÉ."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake ×ÙÐÏÌÎÑÅÔ ÐÒÏ×ÅÒËÕ ÖÅÌÅÚÁ É ÐÒÉ ÎÅÏÂÈÏÄÉÍÏÓÔÉ ÎÁÓÔÒÁÉ×ÁÅÔ \n"
-"ÎÏ×ÙÅ/ÉÚÍÅÎÉ×ÛÉÅÓÑ ÕÓÔÒÏÊÓÔ×Á."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache Ñ×ÌÑÅÔÓÑ ÓÅÒ×ÅÒÏÍ World Wide Web. ïÎ ÉÓÐÏÌØÚÕÅÔÓÑ ÄÌÑ ÏÂÓÌÕÖÉ×ÁÎÉÑ "
-"ÆÁÊÌÏ× HTML É CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"äÅÍÏÎ ÓÕÐÅÒÓÅÒ×ÅÒÁ ÉÎÔÅÒÎÅÔ (ÎÁÚÙ×ÁÅÍÙÊ ÏÂÙÞÎÏ inetd) ÚÁÐÕÓËÁÅÔ ÐÏ ÍÅÒÅ \n"
-"ÎÅÏÂÈÏÄÉÍÏÓÔÉ ÒÁÚÌÉÞÎÙÅ ÉÎÔÅÒÎÅÔ-ÓÅÒ×ÉÓÙ. ïÎ ÏÔ×ÅÞÁÅÔ ÚÁ ÚÁÐÕÓË ÍÎÏÇÉÈ \n"
-"ÓÅÒ×ÉÓÏ×, ×ËÌÀÞÁÑ telnet, ftp, rsh, É rlogin. ïÔËÌÀÞÅÎÉÅ inetd ÏÔËÌÀÞÉÔ \n"
-"ÔÁËÖÅ ×ÓÅ ÓÅÒ×ÉÓÙ, ÚÁ ËÏÔÏÒÙÅ ÏÎ ÏÔ×ÅÞÁÅÔ."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"úÁÐÕÓÔÉÔØ ÆÉÌØÔÒÁÃÉÀ ÐÁËÅÔÏ× ÄÌÑ Linux Ó ÑÄÒÁÍÉ ÓÅÒÉÉ 2.2, ÞÔÏÂÙ ÎÁÓÔÒÏÉÔØ\n"
-"ÓÉÓÔÅÍÕ ÚÁÝÉÔÙ ÓÅÔÉ (firewall) ÄÌÑ ÚÁÝÉÔÙ ×ÁÛÅÊ ÍÁÛÉÎÙ ÏÔ ÓÅÔÅ×ÙÈ ÁÔÁË."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"üÔÏÔ ÐÁËÅÔ ÚÁÇÒÕÖÁÅÔ ×ÙÂÒÁÎÎÕÀ ÒÁÓËÌÁÄËÕ ËÌÁ×ÉÁÔÕÒÙ × ÓÏÏÔ×ÅÔÓÔ×ÉÉ Ó \n"
-"/etc/sysconfig/keyboard.  ÷ÙÂÏÒ ÏÓÕÝÅÓÔ×ÌÑÅÔÓÑ ÐÒÉ ÐÏÍÏÝÉ ÕÔÉÌÉÔÙ "
-"kbdconfig.\n"
-"äÌÑ ÂÏÌØÛÉÎÓÔ×Á ÍÁÛÉÎ ÍÏÖÎÏ ÏÓÔÁ×ÉÔØ ×ËÌÀÞÅÎÎÙÍ."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"á×ÔÏÍÁÔÉÞÅÓËÏÅ ÆÏÒÍÉÒÏ×ÁÎÉÅ ÚÁÇÏÌÏ×ËÁ ÑÄÒÁ × /boot ÄÌÑ\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "á×ÔÏÍÁÔÉÞÅÓËÏÅ ÏÂÎÁÒÕÖÅÎÉÅ É ÎÁÓÔÒÏÊËÁ ÕÓÔÒÏÊÓÔ× ÐÒÉ ÚÁÇÒÕÚËÅ."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf ÉÎÏÇÄÁ ÏÒÇÁÎÉÚÏ×Ù×ÁÅÔ ×ÙÐÏÌÎÅÎÉÅ ÒÁÚÌÉÞÎÙÈ ÚÁÄÁÞ\n"
-"×Ï ×ÒÅÍÑ ÚÁÇÒÕÚËÉ, ÄÌÑ ÐÏÄÄÅÒÖÁÎÉÑ ËÏÎÆÉÇÕÒÁÃÉÉ ÓÉÓÔÅÍÙ."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd Ñ×ÌÑÅÔÓÑ ÄÅÍÏÎÏÍ ÐÅÞÁÔÉ, ÎÅÏÂÈÏÄÉÍÙÍ ÄÌÑ ÎÏÒÍÁÌØÎÏÊ ÒÁÂÏÔÙ lpr. üÔÏ\n"
-"× ÐÅÒ×ÕÀ ÏÞÅÒÅÄØ ÓÅÒ×ÅÒ, ÒÁÓÐÒÅÄÅÌÑÀÝÉÊ ÚÁÄÁÎÉÑ ÎÁ ÐÅÞÁÔØ ÐÏ ÐÒÉÎÔÅÒÁÍ."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux ÷ÉÒÔÕÌÁØÎÙÊ óÅÒ×ÅÒ, ÉÓÐÏÌØÚÕÅÔÓÑ ÄÌÑ ÓÏÚÄÁÎÉÑ ×ÙÓÏËÏÐÒÏÉÚ×ÏÄÉÔÅÌØÎÙÈ "
-"ÓÅÒ×ÅÒÏ×\n"
-"Ó ÈÏÒÏÛÉÍ ÄÏÓÔÕÐÏÍ."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) Ñ×ÌÑÅÔÓÑ ÓÅÒ×ÅÒÏÍ ÄÏÍÅÎÎÙÈ ÉÍÅÎ (DNS), ËÏÔÏÒÙÊ ÉÓÐÏÌØÚÕÅÔÓÑ ÄÌÑ "
-"ÐÒÅÏÂÒÁÚÏ×ÁÎÉÑ ÉÍÅÎ ÍÁÛÉÎ × IP ÁÄÒÅÓÁ."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"íÏÎÔÉÒÕÅÔ É ÒÁÚÍÏÎÔÉÒÕÅÔ ×ÓÅ ÓÅÔÅ×ÙÅ ÆÁÊÌÏ×ÙÅ ÓÉÓÔÅÍÙ (NFS), SMB (Lan\n"
-"Manager/Windows) É NCP (NetWare)."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"áËÔÉ×ÉÚÉÒÕÅÔ/äÅÁËÔÉ×ÉÚÉÒÕÅÔ ×ÓÅ ÓÅÔÅ×ÙÅ ÉÎÔÅÒÆÅÊÓÙ, ÎÁÓÔÒÏÅÎÎÙÅ ÎÁ ÚÁÐÕÓË\n"
-"ÐÒÉ ÚÁÇÒÕÚËÅ."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS - ÜÔÏ ÒÁÓÐÒÏÓÔÒÁÎÅÎÎÙÊ ÐÒÏÔÏËÏÌ ÄÌÑ ÐÒÅÄÏÓÔÁ×ÌÅÎÉÑ ÄÏÓÔÕÐÁ Ë ÆÁÊÌÁÍ × "
-"ÓÅÔÑÈ TCP/IP.\n"
-"üÔÏÔ ÓÅÒ×ÉÓ ÏÂÅÓÐÅÞÉ×ÁÅÔ ÆÕÎËÃÉÏÎÁÌØÎÏÓÔØ ÓÅÒ×ÅÒÁ NFS, ÎÁÓÔÒÁÉ×ÁÅÍÏÇÏ ×\n"
-"ÞÅÒÅÚ ÆÁÊÌ /etc/exports."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS - ÒÁÓÐÒÏÓÔÒÁÎÅÎÎÙÊ ÐÒÏÔÏËÏÌ ÄÌÑ ÐÒÅÄÏÓÔÁ×ÌÅÎÉÑ ÄÏÓÔÕÐÁ Ë ÆÁÊÌÁÍ × ÓÅÔÑÈ "
-"TCP/IP.\n"
-"üÔÏÔ ÓÅÒ×ÉÓ ÐÒÅÄÏÓÔÁ×ÌÑÅÔ ÍÅÈÁÎÉÚÍ ÂÌÏËÉÒÏ×ÁÎÉÑ ÆÁÊÌÏ× NFS."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"á×ÔÏÍÁÔÉÞÅÓËÉ ×ËÌÀÞÁÔØ ËÌÁ×ÉÛÕ numlock × ËÏÎÓÏÌÉ É \n"
-"XFree ÐÒÉ ÚÁÇÒÕÚËÅ."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "ðÏÄÄÅÒÖËÁ OKI 4w É ÓÏ×ÍÅÓÔÉÍÙÈ win-ÐÒÉÎÔÅÒÏ×."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"ðÏÄÄÅÒÖËÁ PCMCIA ÏÂÙÞÎÁ ÎÕÖÎÁ ÄÌÑ ÐÏÄÄÅÒÖËÉ ÓÅÔ×ÙÈ ËÁÒÔ ethernet É ÍÏÄÅÍÏ× "
-"ÎÁ ÐÏÒÔÁÔÉ×ÎÙÈ ËÏÍÐØÀÔÅÒÁÈ. ïÎÁ ÎÅ ÓÔÁÒÔÕÅÔ ÄÏ ÔÅÈ ÐÏÒ, ÐÏËÁ ÎÅ ÂÕÄÅÔ "
-"ÎÁÓÔÒÏÅÎÁ, ÔÁËÉÍ ÏÂÒÁÚÏÍ \n"
-"ÅÅ ÕÓÔÁÎÏ×ËÁ ÎÁ ÍÁÛÉÎÁÈ, ÇÄÅ ÏÎÁ ÎÅ ÎÕÖÎÁ, ÂÅÚÏÐÁÓÎÁ."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper ÕÐÒÁ×ÌÑÅÔ ÓÏÅÄÉÎÅÎÉÑÍÉ RPC, ËÏÔÏÒÙÅ ÉÓÐÏÌØÚÕÀÔÓÑ ÔÁËÉÍÉ "
-"ÐÒÏÔÏËÏÌÁÍÉ\n"
-"ËÁË NFS É NIS. óÅÒ×ÅÒ portmap ÄÏÌÖÅÎ ÒÁÂÏÔÁÔØ ÎÁ ÍÁÛÉÎÁÈ, \n"
-"ËÏÔÏÒÙÅ ÆÕÎËÃÉÏÎÉÒÕÀÔ ËÁË ÓÅÒ×ÅÒÁ ÄÌÑ ÐÒÏÔÏËÏÌÏ×, ËÏÔÏÒÙÅ ÐÏÚ×ÏÌÑÀÔ "
-"ÉÓÐÏÌØÚÏ×ÁÔØ ÍÅÈÁÎÉÚÍ RPC."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix Ñ×ÌÑÅÔÓÑ áÇÅÎÔÏÍ äÏÓÔÁ×ËÉ ðÏÞÔÙ, ÔÏ ÅÓÔØ ÐÒÏÇÒÁÍÍÏÊ, ËÏÔÏÒÁÑ \n"
-"ÐÅÒÅÍÅÝÁÅÔ ÐÏÞÔÕ Ó ÏÄÎÏÊ ÍÁÛÉÎÙ ÎÁ ÄÒÕÇÕÀ."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"óÏÈÒÁÎÑÅÔ É ×ÏÓÓÔÁÎÁ×ÌÉ×ÁÅÔ ÐÕÌ ÓÉÓÔÅÍÎÏÊ ÜÎÔÒÏÐÉÉ ÄÌÑ ÕÌÕÞÛÅÎÉÑ ËÁÞÅÓÔ×Á\n"
-"ÇÅÎÅÒÁÃÉÉ ÓÌÕÞÁÊÎÙÈ ÞÉÓÅÌ."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"îÁÚÎÁÞÁÅÔ raw-ÕÓÔÒÏÊÓÔ×Á block-ÕÓÔÒÏÊÓÔ×ÁÍ (ÔÁËÉÍ ËÁË ÒÁÚÄÅÌÙ\n"
-"ÖÅÓÔËÏÇÏ ÄÉÓËÁ), ÄÌÑ ÉÓÐÏÌØÚÏ×ÁÎÉÑ ÔÁËÉÍÉ ÐÒÉÌÏÖÅÎÉÑÍÉ, ËÁË Oracle"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"äÅÍÏÎ routed ÄÏÐÕÓËÁÅÔ Á×ÔÏÍÁÔÉÞÅÓËÏÅ ÏÂÎÏ×ÌÅÎÉÅ ÔÁÂÌÉà IP ÍÁÒÛÒÕÔÉÚÁÃÉÉ "
-"ÞÅÒÅÚ \n"
-"ÐÒÏÔÏËÏÌ RIP. ÷ ÔÏ ×ÒÅÍÑ ËÁË RIP ÛÉÒÏËÏ ÉÓÐÏÌØÚÕÅÔÓÑ × ÎÅÂÏÌØÛÉÈ ÓÅÔÑÈ, ÄÌÑ\n"
-"ÂÏÌÅÅ ÓÌÏÖÎÙÈ ÓÅÔÅÊ ÎÕÖÎÙ ÂÏÌÅÅ ÓÌÏÖÎÙÅ ÐÒÏÔÏËÏÌÙ ÍÁÒÛÒÕÔÉÚÁÃÉÉ."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"ðÒÏÔÏËÏÌ rstat ÐÏÚ×ÏÌÑÅÔ ÐÏÌØÚÏ×ÁÔÅÌÑÍ ÓÅÔÉ ÐÏÌÕÞÁÔØ\n"
-"ÄÁÎÎÙÅ Ï ÐÒÏÉÚ×ÏÄÉÔÅÌØÎÏÓÔÉ ÌÀÂÏÊ ÍÁÛÉÎÙ ×ÄÁÎÎÏÊ ÓÅÔÉ."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"ðÒÏÔÏËÏÌ rusers ÐÏÚ×ÏÌÑÅÔ ÐÏÌØÚÏ×ÁÔÅÌÑÍ ÓÅÔÉ ÏÐÒÅÄÅÌÑÔØ, ËÔÏ ÒÁÂÏÔÁÅÔ\n"
-"ÎÁ ÄÒÕÇÏÊ ÏÔ×ÅÞÁÀÝÅÊ ÍÁÛÉÎÅ."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"ðÒÏÔÏËÏÌ rwho ÐÏÚ×ÏÌÑÅÔ ÕÄÁÌÅÎÎÏÍÕ ÐÏÌØÚÏ×ÁÔÅÌÀ ÐÏÌÕÞÉÔØ ÓÐÉÓÏË ×ÓÅÈ "
-"ÐÏÌØÚÏ×ÁÔÅÌÅÊ,\n"
-"ÒÁÂÏÔÁÀÝÉÈ ÎÁ ÍÁÛÉÎÅ Ó ÕÓÔÁÎÏ×ÌÅÎÎÙÍ ÄÅÍÏÎÏÍ rwho (ÁÎÁÌÏÇÉÞÎÏ finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "úÁÐÕÓÔÉÔØ ÐÏÄÄÅÒÖËÕ Ú×ÕËÁ ÎÁ ×ÁÛÅÊ ÍÁÛÉÎÅ"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog - ÜÔÏ ×ÏÚÍÏÖÎÏÓÔØ, ËÏÔÏÒÏÊ ÐÏÌØÚÕÀÔÓÑ ÍÎÏÇÉÅ ÄÅÍÏÎÙ ÄÌÑ ÚÁÎÅÓÅÎÉÑ\n"
-"ÓÏÏÂÝÅÎÉÊ × ÒÁÚÌÉÞÎÙÅ ÖÕÒÎÁÌÙ ÓÉÓÔÅÍÎÙÈ ÓÏÏÂÝÅÎÉÊ. õÄÏÂÎÏ, ËÏÇÄÁ syslog "
-"×ÓÅÇÄÁ ÚÁÐÕÝÅÎ."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "úÁÇÒÕÚÉÔØ ÄÒÁÊ×ÅÒÁ ÄÌÑ ×ÁÛÉÈ USB ÕÓÔÒÊÏÓÔ×."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "úÁÐÕÓËÁÅÔ X Font Server (ïÂÑÚÁÔÅÌÅÎ ÄÌÑ ÒÁÂÏÔÙ XFree)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "÷ÙÂÅÒÉÔÅ, ËÁËÉÅ ÓÅÒ×ÉÓÙ ÄÏÌÖÎÙ Á×ÔÏÍÁÔÉÞÅÓËÉ ÚÁÐÕÓËÁÔØÓÑ ÐÒÉ ÚÁÇÒÕÚËÅ"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "ðÒÉÎÔÅÒ"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "éÎÔÅÒÎÅÔ"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "óÉÓÔÅÍÎÙÊ ÒÅÖÉÍ"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "ïÐÃÉÉ ÕÄÁÌÅÎÎÏÇÏ ÐÒÉÎÔÅÒÁ lpd"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "âÁÚÁ ÄÁÎÎÙÈ"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "ÕÓÔÒÏÊÓÔ×Ï"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "×ÙÐÏÌÎÅÎÉÅ"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "ÏÓÔÁÎÏ×ÌÅÎÏ"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "óÅÒ×ÉÓÙ É ÄÅÍÏÎÙ"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"îÅÔ ÄÏÐÏÌÎÉÔÅÌØÎÏÊ ÉÎÆÏÒÍÁÃÉÉ\n"
-"Ï ÜÔÏ ÓÅÒ×ÉÓÅ. éÚ×ÉÎÉÔÅ."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "ðÒÉ ÚÁÇÒÕÚËÅ"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÁ %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"ôÁÂÌÉÃÁ ÒÁÚÄÅÌÏ× ÎÅ ÞÉÔÁÅÔÓÑ, ÏÎÁ ÓÌÉÛËÏÍ ÉÓÐÏÒÞÅÎÁ :(\n"
-"ðÏÓÔÁÒÁÀÓØ ÐÒÏÄÏÌÖÉÔØ, ÏÞÉÝÁÑ ÏÞÉÝÁÑ ÒÁÚÄÅÌÙ"
-
-#: ../../standalone/drakautoinst_.c:44
-#, fuzzy
-msgid "Error!"
-msgstr "ïÛÉÂËÁ"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "îÁÓÔÒÏÊËÁ ÐÏÓÌÅ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "îÁÓÔÒÏÊËÁ ×ÉÄÁ ÚÁÇÒÕÚËÉ"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "ðÏÚÄÒÁ×ÌÑÅÍ!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "òÁÚÄÅÌÅÎÉÅ ÉÎÔÅÒÎÅÔ-ÓÏÅÄÉÎÅÎÉÑ"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "òÁÚÄÅÌÅÎÉÅ ÉÎÔÅÒÎÅÔ-ÓÏÅÄÉÎÅÎÉÑ × ÄÁÎÎÙÊ ÍÏÍÅÎÔ ×ËÌÀÞÅÎÏ"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"îÁÓÔÒÏÊËÁ ÒÁÚÄÅÌÅÎÉÑ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ ÕÖÅ ÓÄÅÌÁÎÁ.\n"
-"÷ ÄÁÎÎÙÊ ÍÏÍÅÎÔ ÒÁÚÄÅÌÅÎÉÅ ×ËÌÀÞÅÎÏ.\n"
-"\n"
-"þÔÏ ×Ù ÈÏÔÉÔÅ ÓÄÅÌÁÔØ?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "×ÙËÌÀÞÉÔØ"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "ÕÂÒÁÔØ"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "ÐÅÒÅÎÁÓÔÒÏÉÔØ"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "÷ÙËÌÀÞÅÎÉÅ ÓÅÒ×ÅÒÏ×..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "òÁÚÄÅÌÅÎÉÅ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ ÔÅÐÅÒØ ×ÙËÌÀÞÅÎÏ."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "òÁÚÄÅÌÅÎÉÅ ÉÎÔÅÒÎÅÔ-ÓÏÅÄÉÎÅÎÉÑ × ÄÁÎÎÙÊ ÍÏÍÅÎÔ ×ÙËÌÀÞÅÎÏ"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"îÁÓÔÒÏÊËÁ ÒÁÚÄÅÌÅÎÉÑ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ ÕÖÅ ÓÄÅÌÁÎÁ.\n"
-"÷ ÄÁÎÎÙÊ ÍÏÍÅÎÔ ÒÁÚÄÅÌÅÎÉÅ ×ÙËÌÀÞÅÎÏ.\n"
-"\n"
-"þÔÏ ×Ù ÈÏÔÉÔÅ ÓÄÅÌÁÔØ?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "×ËÌÀÞÉÔØ"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "÷ËÌÀÞÅÎÉÅ ÓÅÒ×ÅÒÏ×..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "òÁÚÄÅÌÅÎÉÅ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ ÔÅÐÅÒØ ×ËÌÀÞÅÎÏ."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "éÎÔÅÒÆÅÊÓ %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "îÁ ×ÁÛÅÊ ÍÁÛÉÎÅ ÎÅÔ ÓÅÔÅ×ÏÇÏ ÁÄÁÐÔÅÒÁ!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "óÅÔÅ×ÏÊ ÉÎÔÅÒÆÅÊÓ"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"÷ ÓÉÓÔÅÍÅ ÅÓÔØ ÔÏÌØËÏ ÏÄÉÎ ÎÁÓÔÒÏÅÎÎÙÊ ÓÅÔÅ×ÏÊ ÁÄÁÐÔÅÒ:\n"
-"\n"
-"%s\n"
-"\n"
-"ñ ÓÏÂÉÒÁÀÓØ ÎÁÓÔÒÏÉÔØ ÌÏËÁÌØÎÕÀ ÓÅÔØ, ÉÓÐÏÌØÚÕÑ ÜÔÏÔ ÁÄÁÐÔÅÒ."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ, ËÁËÏÊ ÓÅÔÅ×ÏÊ ÁÄÁÐÔÅÒ ÂÕÄÅÔ ÐÏÄËÌÀÞÅÎ Ë ×ÁÛÅÊ "
-"ÌÏËÁÌØÎÏÊ ÓÅÔÉ."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr "÷ÎÉÍÁÎÉÅ, ÓÅÔÅ×ÏÊ ÁÄÁÐÔÅÒ ÕÖÅ ÎÁÓÔÒÏÅÎ. ñ ÅÇÏ ÐÅÒÅËÏÎÆÉÇÕÒÉÒÕÀ."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"ðÏÔÅÎÃÉÁÌØÎÙÊ ËÏÎÆÌÉËÔ ÁÄÒÅÓÏ× LAN ÏÂÎÁÒÕÖÅÎ × ÔÅËÕÝÅÊ ËÏÎÆÉÇÕÒÁÃÉÉ %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "ïÂÎÁÒÕÖÅÎÁ ÎÁÓÔÒÏÊËÁ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÉ (firewall)!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"÷ÎÉÍÁÎÉÅ! ïÂÎÁÒÕÖÅÎÙ ÓÕÝÅÓÔ×ÕÀÝÉÅ ÎÁÓÔÒÏÊËÉ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÅÊ (firewall). "
-"÷ÁÍ ÍÏÇÕÔ ÐÏÔÒÅÂÏ×ÁÔØÓÑ ÎÅÂÏÌØÛÉÅ ÒÕÞÎÙÅ ÉÓÐÒÁ×ÌÅÎÉÑ ÐÏÓÌÅ ÕÓÔÁÎÏ×ËÉ."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "îÁÓÔÒÏÊËÁ..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "îÁÓÔÒÏÊËÁ ÓËÒÉÐÔÏ×, ÕÓÔÁÎÏ×ËÁ ÐÒÏÇÒÁÍÍ, ÚÁÐÕÓË ÓÅÒ×ÉÓÏ×..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "ðÒÏÂÌÅÍÙ Ó ÕÓÔÁÎÏ×ËÏÊ ÐÁËÅÔÁ %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"÷ÓÅ ÎÁÓÔÒÏÅÎÏ.\n"
-"ôÅÐÅÒØ ×Ù ÍÏÖÅÔÅ ÒÁÚÄÅÌÑÔØ ×ÁÛÅ ÉÎÔÅÒÅÎÔ ÓÏÅÄÉÎÅÎÉÅ Ó ÄÒÕÇÉÍÉ ËÏÍÐØÀÔÅÒÁÍÉ × "
-"×ÁÛÅÊ ÌÏËÁÌØÎÏÊ ÓÅÔÉ, ÉÓÐÏÌØÚÕÑ Á×ÔÏÍÁÔÉÞÅÓËÕÀ ÎÁÓÔÒÏÊËÕ ÓÅÔÉ (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "îÁÓÔÒÏÊËÁ ÕÖÅ ÂÙÌÁ ÓÄÅÌÁÎÁ, ÎÏ ÓÅÊÞÁÓ ÏÎÁ ×ÙËÌÀÞÅÎÁ."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "îÁÓÔÒÏÊËÁ ÕÖÅ ÂÙÌÁ ÓÄÅÌÁÎÁ É ÓÅÊÞÁÓ ÏÎÁ ×ËÌÀÞÅÎÁ."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "îÁÓÔÒÏÊËÁ ÒÁÚÄÅÌÅÎÉÑ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ ÎÉËÏÇÄÁ ÎÅ ×ÙÐÏÌÎÑÌÁÓØ."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÒÁÚÄÅÌÅÎÉÑ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"äÏÂÒÏ ÐÏÖÁÌÏ×ÁÔØ × ÕÔÉÌÉÔÕ ÒÁÚÄÅÌÅÎÉÑ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ!\n"
-"\n"
-"%s\n"
-"\n"
-"îÁÖÍÉÔÅ ÎÁ îÁÓÔÒÏÊËÁ ÄÌÑ ÚÁÐÕÓËÁ ÍÁÓÔÅÒÁ ÎÁÓÔÒÏÊËÉ."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ëÏÎÆÉÇÕÒÁÃÉÑ ÓÅÔÉ  (%d ÁÄÁÐÔÅÒÏ×)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "ðÒÏÆÉÌØ: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "õÄÁÌÉÔØ ÐÒÏÆÉÌØ..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "õÄÁÌÑÅÍÙÊ ÐÒÏÆÉÌØ:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "îÏ×ÙÊ ÐÒÏÆÉÌØ..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "éÍÑ ËÏÍÐØÀÔÅÒÁ:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "äÏÓÔÕÐ × ÉÎÔÅÒÎÅÔ"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "ôÉÐ:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "ûÌÀÚ:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "éÎÔÅÒÆÅÊÓ:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "óÔÁÔÕÓ:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "óÏÅÄÉÎÅÎÏ"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "îÅ ÓÏÅÄÉÎÅÎÏ"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "óÏÅÄÉÎÉÔØ..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "ïÔÓÏÅÄÉÎÉÔØ..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "úÁÐÕÓË ÷ÁÛÅÇÏ ÓÏÅÄÉÎÅÎÉÑ..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "úÁËÒÙÔÉÅ ×ÁÛÅÇÏ ÓÏÅÄÉÎÅÎÉÑ..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"óÏÅÄÉÎÅÎÉÅ ÎÅ ÚÁËÒÙÔÏ.\n"
-"ðÏÐÒÏÂÕÊÔÅ ÚÁËÒÙÔØ ÅÇÏ ×ÒÕÞÎÕÀ\n"
-"ÚÁÐÕÓÔÉ× /etc/sysconfig/network-scripts/net_cnx_down\n"
-"ÐÏÄ root."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "ôÅÐÅÒØ ÓÉÓÔÅÍÁ ÏÔÓÏÅÄÉÎÅÎÁ."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "îÁÓÔÒÏÊËÁ ÄÏÓÔÕÐÁ × ÉÎÔÅÒÎÅÔ..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÌÏËÁÌØÎÏÊ ÓÅÔÉ"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "äÒÁÊ×ÅÒ"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "éÎÔÅÒÆÅÊÓ"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "ðÒÏÔÏËÏÌ"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "State"
-msgstr "óÔÁÔÕÓ:"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "îÁÓÔÒÏÉÔØ ÌÏËÁÌØÎÕÀ ÓÅÔØ..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "ðÒÉÍÅÎÉÔØ"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ÐÏÄÏÖÄÉÔÅ... ÷ÎÅÓÅÎÉÅ ÉÚÍÅÎÅÎÉÊ × ÎÁÓÔÒÏÊËÕ"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"õ ×ÁÓ ÎÅÔ ÎÁÓÔÒÏÅÎÎÙÈ ÉÎÔÅÒÆÅÊÓÏ×.\n"
-"óÎÁÞÁÌÁ ÎÕÖÎÏ ÉÈ ÎÁÓÔÒÏÉÔØ ÎÁÖÁ× ÎÁ 'îÁÓÔÒÏÉÔØ'"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÌÏËÁÌØÎÏÊ ÓÅÔÉ"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "áÄÁÐÔÅÒ %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "ðÒÏÔËÏÌ ÚÁÇÒÕÚËÉ"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "úÁÐÕÝÅÎÏ ÐÒÉ ÚÁÇÒÕÚËÅ"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "ëÌÉÅÎÔ DHCP"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "activate now"
-msgstr "áËÔÉ×ÎÙÊ"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "desactivate now"
-msgstr "áËÔÉ×ÎÙÊ"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"õ ×ÁÓ ÎÅÔ ÎÉ ÏÄÎÏÇÏ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ.\n"
-"óÎÁÞÁÌÁ ÓÏÚÄÁÊÔÅ ÓÏÅÄÉÎÅÎÉÅ, ÎÁÖÁ× 'îÁÓÔÒÏÉÔØ'"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "ôÉÐ ÓÏÅÄÉÎÅÎÉÑ: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "ðÁÒÁÍÅÔÒÙ"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "óÅÔÅ×ÁÑ ËÁÒÔÁ"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "ëÌÉÅÎÔ DHCP"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "äÏÂÒÏ ÐÏÖÁÌÏ×ÁÔØ × Crackers"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "óÌÁÂÙÊ"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "ðÁÒÁÎÏÉÄÁÌØÎÙÊ"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"üÔÏÔ ÕÒÏ×ÅÎØ ÎÁÄÏ ÉÓÐÏÌØÚÏ×ÁÔØ Ó ÏÓÔÏÒÏÖÎÏÓÔØÀ. óÉÓÔÅÍÁ ÓÔÁÎÏ×ÉÔÓÑ\n"
-"ÐÒÏÝÅ × ÉÓÐÏÌØÚÏ×ÁÎÉÉ, ÎÏ ÂÏÌÅÅ ÞÕ×ÓÔ×ÉÔÅÌØÎÏÊ: ÜÔÏÔ ÕÒÏ×ÅÎØ ÎÅ ÓÌÅÄÕÅÔ "
-"ÉÓÐÏÌØÚÏ×ÁÔØ\n"
-"ÎÁ ÍÁÛÉÎÁÈ, ÐÏÄËÌÀÞÅÎÎÙÍ Ë ÓÅÔÉ ÉÌÉ Ë Internet. ÷ÈÏÄ ÎÅ ÚÁÝÉÝÅÎ ÐÁÒÏÌÅÍ."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"ðÁÒÏÌÉ ÔÅÐÅÒØ ×ËÌÀÞÅÎÙ, ÎÏ ÉÓÐÏÌØÚÏ×ÁÎÉÅ ËÏÍÐØÀÔÅÒÁ × ËÁÞÅÓÔ×Å ÓÅÔÅ×ÏÇÏ\n"
-"ÐÏ-ÐÒÅÖÎÅÍÕ ÎÅ ÒÅËÏÍÅÎÄÕÅÔÓÑ."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"îÁ ÜÔÏÍ ÕÒÏ×ÎÅ ÂÅÚÏÐÁÓÎÏÓÔÉ ÅÓÔØ ÒÑÄ ÕÌÕÞÛÅÎÉÊ, × ÐÅÒ×ÕÀ ÏÞÅÒÅÄØ\n"
-"Õ×ÅÌÉÞÉÌÏÓØ ËÏÌÉÞÅÓÔ×Ï ÐÒÏ×ÅÒÏË É ÐÒÅÄÕÐÒÅÖÄÅÎÉÊ."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"üÔÏ ÓÔÁÎÄÁÒÔÎÁÑ ÂÅÚÏÐÁÓÎÏÓÔØ, ÒÅËÏÍÅÎÄÕÅÍÁÑ ÄÌÑ ËÏÍÐØÀÔÅÒÁ,\n"
-"ÐÏÄÓÏÅÄÉÎÅÎÎÏÇÏ Ë Internet × ËÁÞÅÓÔ×Å ËÌÉÅÎÔÁ. äÏÂÁ×ÌÅÎÙ ÎÏ×ÙÅ ÐÒÏ×ÅÒËÉ\n"
-"ÎÁ ÂÅÚÏÐÁÓÎÏÓÔØ."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"îÁ ÜÔÏÍ ÕÒÏ×ÎÅ ÂÅÚÏÐÁÓÎÏÓÔÉ ÓÔÁÎÏ×ÉÔÓÑ ×ÏÚÍÏÖÎÙÍ ÉÓÐÏÌØÚÏ×ÁÎÉÅ ÓÉÓÔÅÍÙ\n"
-"× ËÁÞÅÓÔ×Å ÓÅÒ×ÅÒÁ. âÅÚÏÐÁÓÎÏÓÔØ ÔÅÐÅÒØ ÄÏÓÔÁÔÏÞÎÏ ×ÙÓÏËÁ ÄÌÑ ÒÁÂÏÔÙ\n"
-"ÓÅÒ×ÅÒÁ, ÄÏÐÕÓËÁÀÝÅÇÏ ÓÏÅÄÉÎÅÎÉÑ ÓÏ ÍÎÏÇÉÍÉ ËÌÉÅÎÔÁÍÉ."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"íÙ ÐÒÉÎÑÌÉ ÎÁÓÔÒÏÊËÉ ÞÅÔ×ÅÒÔÏÇÏ ÕÒÏ×ÎÑ ÂÅÚÏÐÁÓÎÏÓÔÉ, ÎÏ ÔÅÐÅÒØ ÓÉÓÔÅÍÁ "
-"ÐÏÌÎÏÓÔØÀ ÚÁËÒÙÔÁ.\n"
-"ðÁÒÁÍÅÔÒÙ ÂÅÚÏÐÁÓÎÏÓÔÉ ÕÓÔÁÎÏ×ÌÅÎÙ ÎÁ ÍÁËÓÉÍÕÍ."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "îÁÓÔÒÏÊËÁ ÕÒÏ×ÅÎØ ÂÅÚÏÐÁÓÎÏÓÔÉ"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "÷ÙÂÅÒÉÔÅ ÏÐÃÉÉ ÄÌÑ ÓÅÒ×ÅÒÁ"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "îÁÓÔÒÏÊËÁ ÕÒÏ×ÅÎØ ÂÅÚÏÐÁÓÎÏÓÔÉ"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "ãÅÎÔÒ õÐÒÁ×ÌÅÎÉÑ"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "÷ÙÂÅÒÉÔÅ ÐÒÏÇÒÁÍÍÕ, ËÏÔÏÒÙÊ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "ÉÓÐÏÌØÚÏ×ÁÎÉÅ: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "÷Ù ÈÏÔÉÔÅ, ÞÔÏÂÙ ËÌÁ×ÉÛÁ BackSpace ÏÚÎÁÞÁÌÁ × ËÏÎÓÏÌÉ Delete?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "óÍÅÎÉÔÅ Cd-Rom"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"÷ÓÔÁ×ØÔÅ Cd-Rom ÐÏÄ ÎÁÚ×ÁÎÉÅÍ Installation × ÄÉÓËÏ×ÏÄ É ÎÁÖÍÉÔÅ Ok.\n"
-"åÓÌÉ Õ ×ÁÓ ÅÇÏ ÎÅÔ, ÎÁÖÍÉÔÅ ïÔÍÅÎÉÔØ (Cancel), ÞÔÏÂÙ ÉÚÂÅÖÁÔØ ÏÂÎÏ×ÌÅÎÉÑ Ó "
-"ÜÔÏÇÏ ÄÉÓËÁ."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "îÅ×ÏÚÍÏÖÎÏ ÎÁÞÁÔØ ÏÂÎÏ×ÌÅÎÉÅ !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "serial_usb ÎÅ ÎÁÊÄÅÎ\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "üÍÕÌÉÒÏ×ÁÔØ ÔÒÅÔØÀ ËÎÏÐËÕ?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÅÊ (firewall)"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÅÊ (firewall)"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"CÉÓÔÅÍÁ ÚÁÝÉÔÙ ÓÅÔÅÊ\n"
-"\n"
-"÷Ù ÕÖÅ ÎÁÓÔÒÏÉÌÉ ÓÉÓÔÅÍÕ ÚÁÝÉÔÙ ÓÅÔÅÊ.\n"
-"îÁÖÍÉÔÅ ÎÁ îÁÓÔÒÏÉÔØ ÄÌÑ ÉÚÍÅÎÅÎÉÑ ÉÌÉ ÕÄÁÌÅÎÉÑ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÉ"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"CÉÓÔÅÍÁ ÚÁÝÉÔÙ ÓÅÔÅÊ\n"
-"\n"
-"îÁÖÍÉÔÅ ÎÁ îÁÓÔÒÏÉÔØ ÄÌÑ ÓÏÚÄÁÎÉÑ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÉ"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "÷ÙÂÅÒÉÔÅ ÑÚÙË"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "÷ÙÂÅÒÉÔÅ ËÌÁÓÓ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "ïÐÒÅÄÅÌÅÎÉÅ ÖÅÓÔËÏÇÏ ÄÉÓËÁ"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "îÁÓÔÒÏÊËÁ ÍÙÛÉ"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "÷ÙÂÏÒ ËÌÁ×ÉÁÔÕÒÙ"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "âÅÚÏÐÁÓÎÏÓÔØ"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "îÁÓÔÒ. ÆÁÊÌÏ×ÙÈ ÓÉÓÔÅÍ"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "ÆÏÒÍÁÔÉÒÏ×ÁÎÉÅ ÒÁÚÄÅÌÏ×"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "÷ÙÂÏÒ ÐÁËÅÔÏ× ÄÌÑ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "õÓÔÁÎÏ×ËÁ ÓÉÓÔÅÍÙ"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "äÏÂÁ×ÉÔØ ÐÏÌØÚÏ×ÁÔÅÌÑ"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "îÁÓÔÒÏÊËÁ ÓÅÔÉ"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "îÁÓÔÒÏÊËÁ ÓÅÒ×ÉÓÏ×"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "óÏÚÄÁÔØ ÚÁÇÒÕÚ. ÄÉÓË"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "õÓÔÁÎÏ×ËÁ ÍÅÎÅÄÖÅÒÁ ÚÁÇÒÕÚËÉ"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "îÁÓÔÒÏÊËÁ X Window"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "÷ÙÈÏÄ ÉÚ ÐÒÏÃÅÓÓÁ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"ÔÏÎËÁÑ ÎÁÓÔÒÏÊËÁ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÉ\n"
-"\n"
-"úÄÅÓØ ÎÁÓÔÒÁÉ×ÁÅÔÓÑ ÐÅÒÓÏÎÁÌØÎÁÑ ÓÉÓÔÅÍÁ ÄÌÑ ÜÔÏÊ Mandrake Linux ÍÁÛÉÎÙ.\n"
-"äÌÑ ÓÏÚÄÁÎÉÑ ÓÐÅÃÉÁÌØÎÏÊ ÍÏÝÎÏÊ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÉ, ÏÂÒÁÔÉÔÅ ×ÎÉÍÁÎÉÅ ÎÁ\n"
-"ÓÐÅÃÉÁÌÉÚÉÒÏ×ÁÎÎÙÊ ÄÉÓÔÒÉÂÕÔÉ× MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"÷ÁÍ ÂÕÄÅÔ ÚÁÄÁÎÏ ÎÅÓËÏÌØËÏ ×ÏÐÒÏÓÏ× Ï ÔÏÍ, Ë ËÁËÉÍ ÓÅÒ×ÉÓÁÍ ÍÏÖÎÏ ÂÕÄÅÔ "
-"ÐÏÄÓÏÅÄÉÎÑÔØÓÑ\n"
-"ÉÚ ÉÎÔÅÒÎÅÔÁ. ðÒÏÄÕÍÙ×ÁÊÔÅ ÔÝÁÔÅÌØÎÏ ÏÔ×ÅÔÙ\n"
-", ÔÁË ËÁË ×ÏÐÒÏÓ ÂÅÚÏÐÁÓÎÏÓÔÉ ×ÁÛÅÊ ÍÁÛÉÎÙ - ÜÔÏ ×ÁÖÎÏ.\n"
-"\n"
-"ðÏÖÁÌÕÊÓÔÁ, ÅÓÌÉ ×Ù × ÄÁÎÎÙÊ ÍÏÍÅÎÔ ÎÅ ÉÓÐÏÌØÚÕÅÔÅ ËÁËÏÊ-ÌÉÂÏ ÉÚ ÜÔÉÈ "
-"ÓÅÒ×ÉÓÏ×, ÚÁËÒÏÊÔÅ\n"
-"ÅÇÏ ÓÉÓÔÅÍÏÊ ÚÁÝÉÔÙ ÏÔ ÄÏÓÔÕÐÁ Ë ÎÅÍÕ ÉÚÉÎÔÅÒÎÅÔÁ. ÷Ù ÍÏÖÅÔÅ ÉÚÍÅÎÉÔØ ÜÔÕ "
-"ÎÁÓÔÒÏÊËÕ ÐÏÚÖÅ\n"
-"× ÌÀÂÏÅ ×ÒÅÍÑ!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"éÓÐÏÌØÚÕÅÔÅ ÌÉ ×Ù ÎÁ ÜÔÏÊ ÍÁÛÉÎÅ web ÓÅÒ×ÅÒ, ËÏÔÏÒÙÊ ÄÏÌÖÅÎ ÂÙÔØ ×ÉÄÅÎ\n"
-"ÉÚ ÉÎÔÅÒÎÅÔÁ? åÓÌÉ ×Ù ÉÓÐÏÌØÚÕÅÔÅ web ÓÅÒ×ÅÒ, ÄÏÓÔÕÐ Ë ËÏÔÏÒÏÍÕ ÎÕÖÅÎ ÔÏÌØËÏ "
-"Ó ÜÔÏÊ\n"
-"ÍÁÛÉÎÙ, ×Ù ÍÏÖÅÔÅ ÓÐÏËÏÊÎÏ ÏÔ×ÅÔÉÔØ îÅÔ ÎÁ ÜÔÏÔ ×ÏÐÒÏÓ.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"éÓÐÏÌØÚÕÅÔÅ ÌÉ ×Ù ÓÅÒ×ÅÒ ÉÍÅÎ (DNS) ÎÁ ÜÔÏÊ ÍÁÛÉÎÅ? åÓÌÉ ×Ù ÎÅ ÅÇÏ "
-"ÎÁÓÔÒÁÉ×ÁÌÉ\n"
-"ÄÌÑ ×ÙÄÁÞÉ ÉÎÆÏÍÁÒÃÉÉ ÏÂ IP É ÚÏÎÁÈ ÄÌÑ ×ÓÅÇÏ ÉÎÔÅÒÎÅÔÁ, ÐÏÖÁÌÕÊÓÔÁ,\n"
-"ÏÔ×ÅÔØÔÅ îÅÔ.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"èÏÔÉÔÅ ÌÉ ×Ù ÒÁÚÒÅÛÉÔØ ×ÈÏÄÑÝÉÅ Secure Shell (ssh) ÓÏÅÄÉÎÅÎÉÑ? üÔÏ\n"
-"ÚÁÍÅÎÁ ÐÒÏÇÒÁÍÍÅ telnet, ËÏÔÏÒÕÀ ×Ù, ×ÏÚÍÏÖÎÏ, ÚÁÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÄÌÑ "
-"×ÈÏÄÁ.\n"
-"åÓÌÉ ×Ù ÓÅÊÞÁÓ ÉÓÐÏÌØÚÕÅÔÅ, ×Ù ÏÂÑÚÁÔÅÌØÎÏ ÄÏÌÖÎÙ ÐÅÒÅÊÔÉ ÎÁ ssh. ÄÁÎÎÙÅ × "
-"telnet ÎÅ\n"
-" ÛÉÆÒÕÀÔÓÑ -- ÐÏÜÔÏÍÕ ÎÅËÏÔÏÒÙÅ ×ÚÌÏÍÝÉËÉ ÍÏÇÕÔ ÕËÒÁÓÔØ ×ÁÛ ÐÁÒÏÌØ, ÅÓÌÉ ×Ù "
-"ÉÓÐÏÌØÚÕÅÔÅ telnet.\n"
-"äÁÎÎÙÅ × ssh ÚÁÛÉÆÒÏ×ÁÎÙ É ÎÅ ÄÏÐÕÓËÁÀÔ ÔÁËÏÇÏ ÐÏÄÓÌÕÛÉ×ÁÎÉÑ."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"èÏÔÉÔÅ ÌÉ ×Ù ÒÁÚÒÅÛÉÔØ ×ÈÏÄÑÝÉÅ ÓÏÅÄÉÎÅÎÉÑ telnet?\n"
-"üÔÏ Ó×ÅÒÈÎÅÂÅÚÏÐÁÓÎÏ, ËÁË ÍÙ ÏÂØÑÓÎÑÌÉ × ÐÒÅÄÙÄÕÝÅÍ ÜËÒÁÎÅ. íÙ\n"
-"ÎÁÓÔÏÑÔÅÌØÎÏ ÒÅËÏÍÅÎÄÕÅÍ ÏÔ×ÅÔÉÔ ÚÄÅÓØ No É ÉÓÐÏÌØÚÏ×ÁÔØ ssh ×ÍÅÓÔÏ \n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"éÓÐÏÌØÚÕÅÔÅ ÌÉ ×Ù FTP ÓÅÒ×ÅÒ, Ë ËÏÔÏÒÏÍÕ ÈÏÔÉÔÅ ÐÒÅÄÏÓÔÁ×ÌÑÔØ ÄÏÓÔÕÐ\n"
-"ÉÚ ÉÎÔÅÒÎÅÔÁ? åÓÌÉ ÄÁ, ÔÏ ÍÙ ÎÁÓÔÏÑÔÅÌØÎÏ ÒÅËÏÍÅÎÄÕÅÍ ÉÓÐÏÌØÚÏ×ÁÔØ ÅÇÏ "
-"ÔÏÌØËÏ ÄÌÑ\n"
-"áÎÏÎÉÍÎÏÊ ÐÅÒÅÄÁÞÉ ÄÁÎÎÙÈ. ÷ÓÅ ÐÁÒÏÌÉ ÐÏÓÙÌÁÅÍÙÅ ÓÅÒ×ÅÒÏÍ FTP ÍÏÇÕÔ ÂÙÔØ "
-"ÕËÒÁÄÅÎÙ\n"
-"×ÚÌÏÍÝÉËÁÍÉ, ÐÏÓËÏÌØËÕ FTP ÏÂÙÞÎÏ ÎÅ ÉÓÐÏÌØÚÕÅÔ ÛÉÆÒÏ×ÁÎÉÅ ÐÒÉ ÐÅÒÅÄÁÞÅ "
-"ÐÁÒÏÌÅÊ.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"éóÐÏÌØÚÕÅÔÅ ÌÉ ×Ù ÐÏÞÔÏ×ÙÊ ÓÅÒ×ÅÒ ÎÁ ÜÔÏÊ ÍÁÛÉÎÅ? åÓÌÉ ×Ù ÏÔÐÒÁ×ÌÑÅÔÅ ×ÁÛÉ \n"
-"ÓÏÏÂÝÅÎÉÑ ÞÅÒÅÚ ÐÒÏÇÒÁÍÍÕ pine, mutt ÉÌÉ ÌÀÂÏÇÏ ÄÒÕÇÏÇÏ ÔÅËÓÔÏ×ÏÇÏ ÐÏÞÔÏ×ÏÇÏ "
-"ËÌÉÅÎÔÁ,\n"
-"ÔÏ ÓËÏÒÅÅ ×ÓÅÇÏ - ÄÁ. éÎÁÞÅ, ÚÁËÒÏÊÔÅ ÅÇÏ ÓÉÓÔÅÍÏÊ ÚÁÝÉÔÙ ÓÅÔÉ.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"éÓÐÏÌØÚÕÅÔÅ ÌÉ ×Ù ÎÁ ÜÔÏÊ ÍÁÛÉÎÅ ÓÅÒ×ÅÒÁ POP ÉÌÉ IMAP? üÔÏ ÍÏÖÅÔ ÂÙÔØ "
-"ÉÓÐÏÌØÚÏ×ÁÎÏ\n"
-"ÄÌÑ ÈÒÁÎÅÎÉÑ ÐÏÞÔÏ×ÙÈ ÕÞÅÔÎÙÈ ÚÁÐÉÓÅÊ ÄÌÑ ÐÏÞÔÙ ÂÅÚ web ÉÎÔÅÒÆÅÊÓÁ ÞÅÒÅÚ  \n"
-"ÜÔÕ ÍÁÛÉÎÕ.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"÷Ù ÉÓÐÏÌØÚÕÅÔÅ ÑÄÒÏ 2.2. åÓÌÉ ×ÁÛ IP ÁÄÒÅÓ × ÓÅÔÉ\n"
-"Á×ÔÏÍÁÔÉÞÅÓËÉ ÎÁÓÔÒÁÉ×ÁÅÔÓÑ ÄÏÍÁ ÉÌÉ × ÏÆÉÓÅ \n"
-"(Á×ÔÏÍÁÔÉÞÅÓËÉ ÐÒÉÓ×ÁÉ×ÁÅÔÓÑ), ÔÏÇÄÁ ÎÕÖÎÏ ÜÔÏ ÒÁÚÒÅÛÉÔØ. üÔÏ ÉÍÅÎÎÏ ÔÏÔ\n"
-"ÓÌÕÞÁÊ?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"÷ÒÅÍÑ ÎÁ ×ÁÛÅÍ ËÏÍÐØÀÔÅÒÅ ÓÉÎÈÒÏÎÉÚÉÒÕÅÔÓÑ ÐÏ ÄÒÕÇÏÍÕ ËÏÍÐØÀÔÅÒÕ?\n"
-"ïÂÙÞÎÏ ÜÔÏ ÉÓÐÏÌØÚÕÅÔÓÑ ÓÒÅÄÎÅÇÏ ÒÁÚÍÅÒÁ Unix/Linux ÏÒÇÁÎÉÚÁÃÉÑÍÉ\n"
-"ÄÌÑ ÓÉÎÈÒÏÎÉÚÁÃÉÉ ×ÒÅÍÅÎÉ ÐÒÉ ×ÅÄÅÎÉÉ ÖÕÒÎÁÌÏ× É ÔÏÍÕ ÐÏÄÏÂÎÏÇÏ. åÓÌÉ ×Ù ÎÅ "
-"ÒÁÂÏÔÁÅÔÅ\n"
-"× ÂÏÌØÛÏÍ ÏÆÉÓÅ É ÎÉËÏÇÄÁ ÎÅ ÓÌÙÛÁÌÉ ÏÂ ÜÔÏÍ, ÓËÏÒÅÅ ×ÓÅÇÏ, ÜÔÏ ÎÅ "
-"ÐÒÏÉÓÈÏÄÉÔ \n"
-"."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"îÁÓÔÒÏÊËÁ ÚÁ×ÅÒÛÅÎÁ. íÏÖÎÏ ÚÁÐÉÓÁÔØ ÉÚÍÅÎÅÎÉÑ ÎÁ ÄÉÓË?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "îÅ×ÏÚÍÏÖÎÏ ÏÔËÒÙÔØ %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "ïÛÉÂËÁ ÏÔËÒÙÔÉÑ %s ÄÌÑ ÚÁÐÉÓÉ: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "óÅÔÅ×ÏÊ ËÏÍÐØÀÔÅÒ (ËÌÉÅÎÔ)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS ÓÅÒ×ÅÒ, SMB ÓÅÒ×ÅÒ, Proxy ÓÅÒ×ÅÒ, ssh ÓÅÒ×ÅÒ"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "ïÆÉÓ"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "òÁÂÏÞÁÑ ÓÔÁÎÃÉÑ Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "ðÒÏÇÒÁÍÍÙ ÄÌÑ ×ÁÛÅÇÏ Palm Pilot ÉÌÉ Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "òÁÂÏÞÁÑ ÓÔÁÎÃÉÑ"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "óÉÓÔÅÍÁ ÚÁÝÉÔÙ ÓÅÔÅÊ/íÁÒÛÒÕÔÉÚÁÔÏÒ"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "óÅÒ×ÅÒ ÉÍÅÎ (DNS) É ÓÅÒ×ÅÒ NIS"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"ïÆÉÓÎÙÅ ÐÒÏÇÒÁÍÍÙ: ÔÅÓÔÏ×ÙÅ ÐÒÏÃÅÓÓÏÒÙ (kword, abiword), ÜÌÅËÔÒÏÎÎÙÅ ÔÁÂÌÉÃÙ "
-"(kspread, gnumeric), ÐÒÏÓÍÏÔÒÝÉËÉ pdf, É Ô.Ä."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "ú×ÕËÏ×ÙÅ ÐÒÏÇÒÁÍÍÙ: ÐÌÅÊÅÒÙ mp3 ÉÌÉ MIDI, ÍÉËÛÅÒÙ, É Ô.Ä."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "ëÎÉÇÉ É HowTo Ï Linux É Ó×ÏÂÏÄÎÏÍ ÐÒÏÇÒÁÍÍÎÏÍ ÏÂÅÓÐÅÞÅÎÉÉ"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "òÁÂÏÞÁÑ ÓÔÁÎÃÉÑ KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ÄÒÕÇÉÅ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "íÕÌØÔÉÍÅÄÉÁ - ÷ÉÄÅÏ"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "îÁÂÏÒ ÐÒÏÇÒÁÍÍ ÄÌÑ ÐÏÞÔÙ, ÎÏ×ÏÓÔÅÊ, web, ÐÅÒÅÄÑÞÉ ÆÁÊÌÏ× É ÞÁÔÁ"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "âÁÚÁ ÄÁÎÎÙÈ"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "óÅÒ×ÅÒ ÂÁÚ ÄÁÎÎÙÈ PostgreSQL ÉÌÉ MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "ðÒÏÇÒÁÍÍÙ, ÕÐÒÏÝÁÀÝÉÅ ÎÁÓÔÒÏÊËÕ ×ÁÛÅÇÏ ËÏÍÐØÀÔÅÒÁ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "íÕÌØÔÉÍÅÄÉÁ - ú×ÕË"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "õÔÉÌÉÔÙ"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "äÏËÕÍÅÎÔÁÃÉÑ"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "ðÒÏÇÒÁÍÍÙ ÄÌÑ ËÏÎÓÏÌÉ"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "ðÏÞÔÏ×ÙÊ ÓÅÒ×ÅÒ Postfix, ÓÅÒ×ÅÒ ÎÏ×ÏÓÔÅÊ Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "óÔÁÎÃÉÑ ÉÎÔÅÒÎÅÔ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "íÕÌØÔÉÍÅÄÉÁ ÓÔÁÎÃÉÑ"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÌÏËÁÌØÎÏÊ ÓÅÔÉ"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "åÝÅ çÒÁÆÉÞÅÓËbÅ chtls (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"óÒÅÄÁ K Desktop, ÏÓÎÏ×ÎÁÑ ÇÒÁÆÉÞÅÓËÁÑ ÓÒÅÄÁ Ó ÎÁÂÏÒÏÍ ÓÏÏÔ×ÅÔÓ×ÕÀÝÉÈ ÐÒÏÇÒÁÍÍ"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "çÒÁÆÉÞÅÓËÁÑ ÓÒÅÄÁ"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "òÁÚÒÁÂÏÔËÁ"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "ðÒÏÇÒÁÍÍÙ ÄÌÑ ÓÏÚÄÁÎÉÑ É ÚÁÐÉÓÉ CD ÄÉÓËÏ×"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "ïÆÉÓÎÁÑ ÒÁÂÏÞÁÑ ÓÔÁÎÃÉÑ"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, É Ô.Ä."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "çÒÁÆÉÞÅÓËÉÅ ÐÒÏÇÒÁÍÍÙ, ÔÁËÉÅ ËÁË The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "ÂÉÂÌÉÏÔÅËÁ C É C++, ÐÒÏÇÒÁÍÍÙ É ÆÁÊÌÙ include"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "óÅÔÅ×ÏÊ ÓÅÒ×ÅÒ"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "ðÏÞÔÁ/ðÒÏÇÒÁÍÍÙ ÄÌÑ ÒÁÂÏÔÙ × ÇÒÕÐÐÅ/îÏ×ÏÓÔÉ"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "éÇÒÏ×ÁÑ ÓÔÁÎÃÉÑ"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "÷ÉÄÅÏ-ÐÌÅÊÅÒÙ É ÒÅÄÁËÔÏÒÙ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "íÕÌØÔÉÍÅÄÉÁ - çÒÁÆÉËÁ"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "ðÒÏÇÒÁÍÍÙ ÄÌÑ ÒÁÚ×ÌÅÞÅÎÉÑ: ÉÇÒÙ É Ô.Ä."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"îÁÂÏÒ ÐÒÏÇÒÁÍÍ ÄÌÑ ÞÔÅÎÉÑ É ÏÔÐÒÁ×ËÉ ÐÏÞÔÙ É ÎÏ×ÏÓÔÅÊ (pine, mutt, tin..) É "
-"ÐÒÏÓÍÏÔÒÁ Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "áÒÈÉ×ÉÒÏ×ÁÎÉÅ, ÜÍÕÌÑÃÉÑ, ÏÔÓÌÅÖÉ×ÁÎÉÅ"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "ìÉÞÎÙÅ ÆÉÎÁÎÓÙ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "çÒÁÆÉÞÅÓËÁÑ ÓÒÅÄÁ Ó ÎÁÂÏÒÏÍ ÄÒÕÖÅÓÔ×ÅÎÎÙÈ ÐÒÏÇÒÁÍÍ "
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "ëÌÉÅÎÔÙ ÄÌÑ ÒÁÚÎÙÈ ÐÒÏÔÏËÏÌÏ×, ×ËÌÀÞÁÑ ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "ûÌÀÚ ÉÎÔÅÒÎÅÔ"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "ðÒÏÇÒÁÍÍÙ ÄÌÑ ÐÒÏÉÇÒÙ×ÁÎÉÑ/ÒÅÄÁËÔÉÒÏ×ÁÎÉÑ Ú×ÕËÁ É ×ÉÄÅÏ"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "äÒÕÇÉÅ ÇÒÁÆÉÞÅÓËÉÅ ÓÒÅÄÙ"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "òÅÄËÁÔÏÒÙ, ÏÂÏÌÏÞËÉ, ÆÁÊÌÏ×ÙÅ ÕÔÉÌÉÔÙ, ÔÅÒÍÉÎÁÌÙ"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "ðÒÏÇÒÁÍÍÙ ÄÌÑ ÕÐÒÁ×ÌÅÎÉÑ ÆÉÎÁÎÓÁÍÉ, ÔÁËÉÅ ËÁË gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "éÇÒÙ"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "õÐÒÁ×ÌÅÎÉÅ ÌÉÞÎÏÊ ÉÎÆÏÒÍÁÃÉÅÊ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "íÕÌØÔÉÍÅÄÉÁ - úÁÐÉÓØ CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "îÁÕÞÎÁÑ ÒÁÂÏÞÁÑ ÓÔÁÎÃÉÑ"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "ÎÅ×ÏÚÍÏÖÎÏ ÏÔËÒÙÔØ ÄÌÑ ÞÔÅÎÉÑ /etc/sysconfig/autologin : %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "÷Ù ÈÏÔÉÔÅ ÐÅÒÅÚÁÐÕÓÔÉÔØ ÓÅÔØ"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "÷Ù ÓÏÇÌÁÓÎÙ?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "óÏÂÉÒÁÀÓØ ÐÅÒÅÚÁÐÕÓÔÉÔØ ÓÅÔÅ×ÏÅ ÕÓÔÒÏÊÓÔ×Ï:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "óÏÂÉÒÁÀÓØ ÐÅÒÅÚÁÐÕÓÔÉÔØ ÓÅÔÅ×ÏÅ ÕÓÔÒÏÊÓÔ×Ï %s. ÷Ù ÓÏÇÌÁÓÎÙ?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "åÓÌÉ ÎÅ ÚÎÁÅÔÅ ÔÏÞÎÏ ÄÒÕÇÏÊ ×ÁÒÉÁÎÔ, ÔÏ ÏÂÙÞÎÙÍ ×ÙÂÏÒÏÍ Ñ×ÌÑÅÔÓÑ \"/dev/"
-#~ "hda\"\n"
-#~ "(IDE ÍÁÓÔÅÒ ÄÉÓË ÎÁ ÐÅÒ×ÏÍ ËÁÎÁÌÅ) ÉÌÉ \"/dev/sda\" (ÐÅÒ×ÙÊ SCSI ÄÉÓË)."
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "éÍÅÀÔÓÑ ÓÌÅÄÕÀÝÉÅ ÏÞÅÒÅÄÉ ÐÅÞÁÔÉ.\n"
-#~ "÷Ù ÍÏÖÅÔÅ ÄÏÂÁ×ÉÔØ ÎÏ×ÙÅ ÉÌÉ ÉÚÍÅÎÉÔØ ÓÕÝÅÓÔ×ÕÀÝÉÅ."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "ôÉÐ ÓÏÅÄÉÎÅÎÉÑ: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "÷ÙÂÅÒÉÔÅ ÐÏÌØÚÏ×ÁÔÅÌÑ ÐÏ ÕÍÏÌÞÁÎÉÀ:"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "ðÒÏ×ÅÒØÔÅ ×ÁÛÕ ÍÙÛØ ÚÄÅÓØ."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "÷ÙÂÅÒÉÔÅ ÐÒÅÄÐÏÞÔÉÔÅÌØÎÙÊ ÑÚÙË ÄÌÑ ÕÓÔÁÎÏ×ËÉ É ÉÓÐÏÌØÚÏ×ÁÎÉÑ ÓÉÓÔÅÍÙ."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "÷ÁÍ ÎÅÏÂÈÏÄÉÍÏ ÐÒÉÎÑÔØ ÕÓÌÏ×ÉÑ ÌÉÃÅÎÚÉÉ ÄÌÑ ÐÒÏÄÏÌÖÅÎÉÑ ÕÓÔÁÎÏ×ËÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "îÁÖÍÉÔÅ \"ðÒÉÎÑÔØ\" ÅÓÌÉ ×Ù ÓÏÇÌÁÓÎÙ Ó ÕÓÌÏ×ÉÑÍÉ ÌÉÃÅÎÚÉÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "îÁÖÍÉÔÅ \"ïÔËÁÚÁÔØÓÑ\" ÅÓÌÉ ×Ù ÎÅ ÓÏÇÌÁÓÎÙ Ó ÅÅ ÕÓÌÏ×ÉÑÍÉ. õÓÔÁÎÏ×ËÁ "
-#~ "ÂÕÄÅÔ ÐÒÅÒ×ÁÎÁ ÂÅÚ ÉÚÍÅÎÅÎÉÑ ×ÁÛÅÊ ÔÅËÕÝÅÊ\n"
-#~ "ËÏÎÆÉÇÕÒÁÃÉÉ."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr ""
-#~ "÷ÙÂÅÒÉÔÅ ÉÚ ÐÒÉ×ÅÄÅÎÎÏÇÏ ÓÐÉÓËÁ ÒÁÓËÌÁÄËÕ, ÓÏÏÔ×ÅÔÓÔ×ÕÀÝÕÀ ×ÁÛÅÊ "
-#~ "ËÌÁ×ÉÁÔÕÒÅ"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "åÓÌÉ ×Ù ÈÏÔÉÔÅ, ÞÔÏÂÙ ÄÒÕÇÉÅ ÑÚÙËÉ (ËÒÏÍÅ ×ÙÂÒÁÎÎÙÈ \n"
-#~ "× ÎÁÞÁÌÅ ÕÓÔÁÎÏ×ËÉ) ÂÙÌÉ ÄÏÓÔÕÐÎÙ ÐÏÓÌÅ ÏËÏÎÞÁÎÉÑ ÕÓÔÁÎÏ×ËÉ, ÐÏÖÁÌÕÊÓÔÁ "
-#~ "×ÙÂÅÒÉÔÅ\n"
-#~ "ÉÈ ÉÚ ÓÐÉÓËÁ. åÓÌÉ ×Ù ÈÏÔÉÔÅ ×ÙÂÒÁÔØ ÉÈ ×ÓÅ, ÐÒÏÓÔÏ ×ÙÂÅÒÉÔÅ \"÷ÓÅ\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "÷ÙÂÅÒÉÔÅ:\n"
-#~ "\n"
-#~ "  - ÷ÙÂÏÒÏÞÎÙÊ: åÓÌÉ ×Ù ÚÎÁËÏÍÙ Ó GNU/Linux, ÔÏ ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ÃÅÌÅ×ÏÅ \n"
-#~ "ÎÁÚÎÁÞÅÎÉÅ ×ÁÛÅÊ ÓÉÓÔÅÍÙ. äÅÔÁÌÉ ÏÐÉÓÁÎÙ ÎÉÖÅ. \n"
-#~ "\n"
-#~ "\n"
-#~ "  - üËÓÐÅÒÔ: ðÏÄÒÁÚÕÍÅ×ÁÅÔÓÑ, ÞÔÏ Õ ×ÁÓ ÅÓÔØ ÏÐÙÔ Ó GNU/Linux  É ×Ù "
-#~ "ÈÏÔÉÔÅ \n"
-#~ "    ×ÙÐÏÌÎÉÔØ ÔÏÎËÕÀ ÎÁÓÔÒÏÊËÕ ÕÓÔÁÎÏ×ËÉ. ëÁË É ÄÌÑ ÕÒÏ×ÎÑ \"÷ÙÂÏÒÏÞÎÁÑ"
-#~ "\" \n"
-#~ "    ×Ù ÓÍÏÖÅÔÅ ÕËÁÚÁÔØ ÃÅÌÅ×ÏÅ ÎÁÚÎÁÞÅÎÉÅ ×ÁÛÅÊ ÓÉÓÔÅÍÙ.\n"
-#~ "    îÏ, ÐÏÖÁÌÕÊÓÔÁ, ÷ùâéòáêôå üôïô õòï÷åîø ôïìøëï åóìé ÷ù ô÷åòäï õ÷åòåîù\n"
-#~ "    ÷ ôïí þôï ÷ù äåìáåôå"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "ôÅÐÅÒØ ×Ù ÄÏÌÖÎÙ ÏÐÒÅÄÅÌÉÔØ ÉÓÐÏÌØÚÏ×ÁÎÉÅ ×ÁÛÅÊ ÓÉÓÔÅÍÙ. ÷ÁÒÉÁÎÔÙ:\n"
-#~ "\n"
-#~ "* òÁÂÏÞÁÊ ÓÔÁÎÃÉÑ: ÜÔÏ ÉÄÅÁÌØÎÙÊ ×ÙÂÏÒ × ÔÏÍ ÓÌÕÞÁÅ, ÅÓÌÉ ×Ù ÐÌÁÎÉÒÕÅÔÅ "
-#~ "ÉÓÐÏÌØÚÏ×ÁÔØ ÓÉÓÔÅÍÕ × ÏÓÎÏ×ÎÏÍ ÄÌÑ ÏÂÙÞÎÏÊ ÒÁÂÏÔÙ × ÏÆÉÓÅ\n"
-#~ "  ÉÌÉ ÄÏÍÁ.\n"
-#~ "\n"
-#~ "\n"
-#~ "* òÁÚÒÁÂÏÔËÁ ÐÒÏÇÒÁÍÍt: ÜÔÏ ÈÏÒÏÛÉÊ ×ÙÂÏÒ, ÅÓÌÉ ×Ù ÐÌÁÎÉÒÕÅÔÅ "
-#~ "ÉÓÐÏÌØÚÏ×ÁÔØ Ó×ÏÀ ÓÉÓÔÅÍÕ × ÏÓÎÏ×ÎÏÍ ÄÌÑ ÒÁÚÒÁÂÏÔËÉ ÐÒÏÇÒÁÍÍ. õ ×ÁÓ "
-#~ "ÂÕÄÅÔ\n"
-#~ "  ÐÏÌÎÙÊ ÎÁÂÏÒ ÕÓÔÁÎÏ×ÌÅÎÎÙÈ ÐÒÏÇÒÁÍÍ ÄÌÑ ËÏÍÐÉÌÑÃÉÉ, ÏÔÌÁÄËÉ, "
-#~ "ÆÏÒÍÁÔÉÒÏ×ÁÎÉÑ ÉÓÈÏÄÎÙÈ ÔÅËÓÔÏ× Á ÔÁËÖÅ ÄÌÑ ÓÏÚÄÁÎÉÑ ÐÁËÅÔÏ× ÐÒÏÇÒÁÍÍ.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "* óÅÒ×ÅÒ: ÈÏÒÏÛÉÊ ×ÙÂÏÒ, ÅÓÌÉ ×Ù ÐÌÁÎÉÒÕÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ËÏÍÐØÀÔÅÒ × "
-#~ "ËÁÞÅÓÔ×Å ÓÅÒ×ÅÒÁ. ìÉÂÏ × ËÁÞÅÓÔ×Å ÆÁÊÌ-ÓÅÒ×ÅÒÁ (NFS ÉÌÉ\n"
-#~ "  SMB), ÓÅÒ×ÅÒÁ ÐÅÞÁÔÉ (ÄÌÑ Unix ÉÌÉ ÄÌÑ Microsoft Windows), ÓÅÒ×ÅÒÁ "
-#~ "ÁÕÔÅÎÔÉÆÉËÁÃÉÉ (NIS), ÓÅÒ×ÅÒÁ ÂÁÚ ÄÁÎÎÙÈ\n"
-#~ "  É ÔÁË ÄÁÌÅÅ. ðÏÜÔÏÍÕ ÎÅ ÏÖÉÄÁÊÔÅ, ÞÔÏ ÂÕÄÕÔ ÕÓÔÁÎÏ×ÌÅÎÙ ÐÁËÅÔÙ ÔÉÐÁ "
-#~ "KDE, GNOME, É ÐÏÄÏÂÎÙÅ. "
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "ôÅÐÅÒØ ×Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ÇÒÕÐÐÕ ÐÁËÅÔÏ×, ËÏÔÏÒÙÅ ×Ù ÈÏÔÉÔÅ\n"
-#~ "ÕÓÔÁÎÏ×ÉÔØ ÉÌÉ ÏÂÎÏ×ÉÔØ.\n"
-#~ "\n"
-#~ "\n"
-#~ "úÁÔÅÍ DrakX ÐÒÏ×ÅÒÉÔ, ÄÏÓÔÁÔÏÞÎÏ ÌÉ Õ ×ÁÓ ÍÅÓÔÁ ÄÌÑ ÉÈ ÕÓÔÁÎÏ×ËÉ. åÓÌÉ "
-#~ "ÎÅÔ,\n"
-#~ "ÂÕÄÅÔ ×ÙÄÁÎÏ ÐÒÅÄÕÐÒÅÖÄÅÎÉÅ. åÓÌÉ ×Ù ×ÓÅ ÒÁ×ÎÏ ÈÏÔÉÔÅ ÐÒÏÄÏÌÖÉÔØ, "
-#~ "ÕÓÔÁÎÏ×ËÁ ÂÕÄÅÔ ×ÙÂÒÁÎÎÙÈ\n"
-#~ "ÇÒÕÐÐ ÂÕÄÅÔ ×ÙÐÏÌÎÅÎÁ ÚÁ ÉÓËÌÀÞÅÎÉÅÍ ÍÅÎÅÅ ×ÁÖÎÙÈ\n"
-#~ "ÐÁËÅÔÏ×. ÷ÎÉÚÕ ÓÐÉÓËÁ ×Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ×ÁÒÉÁÎÔ \n"
-#~ "\"éÎÄÉ×ÉÄÕÁÌØÎÙÊ ×ÙÂÏÒ ÐÁËÅÔÏ×\"; - × ÜÔÏÍ ÓÌÕÞÁÅ ×ÁÍ ÐÒÉÄÅÔÓÑ "
-#~ "ÐÒÏÓÍÏÔÒÅÔØ ÓÐÉÓÏË\n"
-#~ "ÉÚ ÂÏÌÅÅ ÞÅÍ 1000 ÐÁËÅÔÏ×..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ÓÄÅÌÁÔØ ÉÎÄÉ×ÉÄÕÁÌØÎÙÊ ×ÙÂÏÒ ÐÁËÅÔÏ×, ËÏÔÏÒÙÅ\n"
-#~ "×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ.\n"
-#~ "\n"
-#~ "\n"
-#~ "÷Ù ÍÏÖÅÔÅ ÒÁÚ×ÏÒÁÞÉ×ÁÔØ É Ó×ÏÒÁÞÉ×ÁÔØ ÄÅÒÅ×Ï ÎÁÖÉÍÁÑ × ÌÅ×ÏÍ ÕÇÌÕ ÏËÎÁ\n"
-#~ "ÐÁËÅÔÏ×.\n"
-#~ "\n"
-#~ "\n"
-#~ "åÓÌÉ ×Ù ÐÒÅÄÐÏÞÉÔÁÅÔÅ ÏÔÓÏÒÔÉÒÏ×ÁÔØ ÐÁËÅÔÙ × ÁÌÆÁ×ÉÔÎÏÍ ÐÏÒÑÄËÅ, ÎÁÖÍÉÔÅ "
-#~ "ÎÁ ÉËÏÎËÕ\n"
-#~ "\"ðÅÒÅËÌÀÞÉÔØ ÏÂÝÉÊ ÓÐÉÓÏË/ÓÏÒÔÉÒÏ×ËÕ ÐÏ ÇÒÕÐÐÁÍ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "åÓÌÉ ×Ù ÈÏÔÉÔÅ ÐÏÌÕÞÁÔØ ÐÒÅÄÕÐÒÅÖÄÅÎÉÑ Ï ÚÁ×ÉÓÉÍÏÓÔÑÈ ÍÅÖÄÕ ÐÁËÅÔÁÍÉ, "
-#~ "ÎÁÖÍÉÔÅ ÎÁ \"á×ÔÏÍÁÔÉÞÅÓËÉÅ\n"
-#~ "ÚÁ×ÉÓÉÍÏÓÔÉ\". åÓÌÉ ×Ù ÜÔÏ ÓÄÅÌÁÅÔÅ, ÉÍÅÊÔÅ ××ÉÄÕ, ÞÔÏ ÏÔÍÅÎÁ ×ÙÂÏÒÁ "
-#~ "ÏÄÎÏÇÏ ÐÁËÅÔÁ ÍÏÖÅÔ ÍÏÌÞÁ\n"
-#~ "ÏÔÍÅÎÉÔØ ×ÙÂÏÒ ÎÅÓËÏÌØËÉÈ ÄÒÕÇÉÈ ÐÁËÅÔÏ×, ÚÁ×ÉÓÑÝÉÈ ÏÔ ÎÅÇÏ."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "åÓÌÉ Õ ×ÁÓ ÅÓÔØ ×ÓÅ CD ÉÚ ÐÒÉ×ÅÄÅÎÎÏÇÏ ×ÙÛÅ ÓÐÉÓËÁ, ÎÁÖÍÉÔÅ Ok.\n"
-#~ "åÓÌÉ Õ ×ÁÓ ÎÅÔ ÎÉ ÏÄÎÏÇÏ ÉÚ ÎÉÈ, ÎÁÖÍÉÔÅ ïÔÍÅÎÉÔØ.\n"
-#~ "åÓÌÉ ÏÔÓÕÔÓÔ×ÕÀÔ ÔÏÌØËÏ ÎÅËÏÔÏÒÙÅ CD, ÏÔÍÅÎÉÔÅ ÉÈ ×ÙÂÏÒ É ÎÁÖÍÉÔÅ Ok."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "åÓÌÉ ×Ù ÈÏÔÉÔÅ ÐÏÄËÌÀÞÉÔØ ×ÁÛ ËÏÍÐØÀÔÅÒ Ë ÉÎÔÅÒÎÅÔÕ ÉÌÉ\n"
-#~ "Ë ÌÏËÁÌØÎÏÊ ÓÅÔÉ ×ÙÂÅÒÉÔÅ ÎÕÖÎÙÊ ×ÁÒÉÁÎÔ. ðÏÖÁÌÕÊÓÔÁ, ×ËÌÀÞÉÔÅ ×ÁÛÅ "
-#~ "ÕÓÔÒÏÊÓÔ×Ï\n"
-#~ "ÐÅÒÅÄ ×ÙÂÏÒÏÍ, ÞÔÏÂÙ DrakX ÓÍÏÇ ÅÇÏ Á×ÔÏÍÁÔÉÞÅÓËÉ ÏÐÒÅÄÅÌÉÔØ.\n"
-#~ "\n"
-#~ "\n"
-#~ "åÓÌÉ Õ ×ÁÓ ÎÅÔ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ ÉÌÉ Ó ÌÏËÁÌØÎÏÊ ÓÅÔØÀ, ×ÙÂÅÒÉÔÅ\n"
-#~ "\"ïÔËÌÀÞÉÔØ ÓÅÔØ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "åÓÌÉ ×Ù ÈÏÔÉÔÅ ÎÁÓÔÒÏÉÔØ ÓÅÔØ ÐÏÓÌÅ ÕÓÔÁÎÏ×ËÉ, ÌÉÂÏ ÅÓÌÉ ×Ù ÕÖÅ\n"
-#~ "ÚÁËÏÎÞÉÌÉ ÎÁÓÔÒÏÊËÕ ÓÅÔÅ×ÏÇÏ ÓÏÅÄÉÎÅÎÉÑ, ×ÙÂÅÒÉÔÅ \"÷ÙÐÏÌÎÅÎÏ\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "îÉ ÏÄÎÏÇÏ ÍÏÄÅÍÁ ÎÅ ÏÂÎÁÒÕÖÅÎÏ. ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÙÊ "
-#~ "ÐÏÒÔ, Ë ËÏÔÏÒÏÍÕ ÏÎ ÐÏÄËÌÀÞÅÎ.\n"
-#~ "\n"
-#~ "\n"
-#~ "äÌÑ ÓÐÒÁ×ËÉ - ÐÅÒ×ÙÊ ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÙÊ ÐÏÒÔ (ÎÁÚÙ×ÁÅÍÙÊ \"COM1\" × "
-#~ "Microsoft\n"
-#~ "Windows) × Linux ÎÁÚÙ×ÁÅÔÓÑ \"ttyS0\"."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ÎÁÓÔÒÏÉÔØ ÐÁÒÁÍÅÔÒÙ ÄÏÚ×ÏÎÁ. åÓÌÉ ×Ù ÎÅ ÚÎÁÅÔÅ\n"
-#~ "ÉÌÉ ÎÅ Õ×ÅÒÅÎÙ × ÔÏÍ, ÞÔÏ ÎÕÖÎÏ ××ÅÓÔÉ, ÐÒÁ×ÉÌØÎÁÑ ÉÎÆÏÒÍÁÃÉÑ ÍÏÖÅÔ ÂÙÔØ "
-#~ "ÐÏÌÕÞÅÎÁ ÏÔ\n"
-#~ "×ÁÛÅÇÏ ÉÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ. åÓÌÉ ×Ù ÎÅ ××ÅÄÅÔÅ ÉÎÆÏÒÍÁÃÉÀ Ï DNS (ÓÅÒ×ÅÒ "
-#~ "ÉÍÅÎ)\n"
-#~ "ÓÅÊÞÁÓ, ÔÏ ÜÔÁ ÉÎÆÏÒÍÁÃÉÑ ÂÕÄÅÔ ÐÏÌÕÞÅÎÁ ÏÔ ×ÁÛÅÇÏ ÉÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ ×Ï "
-#~ "×ÒÅÍÑ\n"
-#~ "ÓÏÅÄÉÎÅÎÉÑ."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "åÓÌÉ Õ ×ÁÓ ×ÎÅÛÎÉÊ ÍÏÄÅÍ, ×ËÌÀÞÉÔÅ ÅÇÏ ÓÅÊÞÁÓ, ÞÔÏÂÙ DrakX ÓÍÏÇ ÅÇÏ "
-#~ "Á×ÔÏÍÁÔÉÞÅÓËÉ ÏÐÒÅÄÅÌÉÔØ."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "ðÏÖÁÌÕÊÓÔÁ, ×ËÌÀÞÉÔÅ ×ÁÛ ÍÏÄÅÍ É ×ÙÂÅÒÉÔÅ ÐÒÁ×ÉÌØÎÙÊ."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "åÓÌÉ ×Ù ÎÅ Õ×ÅÒÅÎÙ × ÐÒÁ×ÉÌØÎÏÓÔÉ ×ÙÛÅÕËÁÚÁÎÎÏÊ ÉÎÆÏÒÍÁÃÉÉ\n"
-#~ "ÉÌÉ ×Ù ÎÅ ÚÎÁÅÔÅ, ÞÔÏ ××ÏÄÉÔØ, ÐÒÁ×ÉÌØÎÁÑ ÉÎÆÏÒÍÁÃÉÑ\n"
-#~ "ÍÏÖÅÔ ÂÙÔØ ÐÏÌÕÞÅÎÁ ÏÔ ÉÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ. åÓÌÉ ×Ù ÎÅ ××ÅÄÅÔÅ ÓÅÊÞÁÓ\n"
-#~ "ÉÎÆÏÒÍÁÃÉÀ Ï DNS (ÓÅÒ×ÅÒÅ ÉÍÅÎ), ÜÔÁ ÉÎÆÏÒÍÁÃÉÑ ÂÕÄÅÔ ÐÏÌÕÞÅÎÁ ÐÏÚÖÅ\n"
-#~ "ÏÔ ×ÁÛÅÇÏ ÉÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ ×Ï ×ÒÅÍÑ ÓÏÅÄÉÎÅÎÉÑ."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ÷Ù ÍÏÖÅÔÅ ÚÁÄÁÔØ ÎÁÚ×ÁÎÉÅ (ÉÍÑ) ÄÌÑ ×ÁÛÅÊ ÍÁÛÉÎÙ, ÅÓÌÉ ÈÏÔÉÔÅ. "
-#~ "åÓÌÉ\n"
-#~ "×Ù ÎÅ ÚÎÁÅÔÅ ÉÌÉ ÎÅ Õ×ÅÒÅÎÙ, ÞÔÏ ÎÕÖÎÏ ××ÅÓÔÉ, ÐÒÁ×ÉÌØÎÁÑ ÉÎÆÏÒÍÁÃÉÑ "
-#~ "ÍÏÖÅÔ ÂÙÔØ\n"
-#~ "ÐÏÌÕÞÅÎÁ ÏÔ ×ÁÛÅÇÏ ÉÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ÎÁÓÔÒÏÊÉÔØ ×ÁÛÅ ÕÓÔÒÏÊÓÔ×Ï ÐÏÄËÌÀÞÅÎÉÑ Ë ÓÅÔÉ.\n"
-#~ "\n"
-#~ "   * IP ÁÄÒÅÓ: ÅÓÌÉ ×Ù ÎÅ ÚÎÁÅÔÅ ÉÌÉ ÎÅ Õ×ÅÒÅÎÙ × ÔÏÍ, ÞÔÏ ÎÕÖÎÏ ××ÅÓÔÉ, "
-#~ "ÓÐÒÏÓÉÔÅ ÁÄÍÉÎÉÓÔÒÁÔÏÒÁ ×ÁÛÅÊ ÓÅÔÉ.\n"
-#~ "     ÷Ù ÎÅ ÄÏÌÖÎÙ ××ÏÄÉÔØ IP ÁÄÒÅÓ, ÅÓÌÉ ×ÙÂÅÒÉÔÅ ×ÁÒÉÁÎÔ "
-#~ "\"á×ÔÏÍÁÔÉÞÅÓËÉÊ IP\" ×ÎÉÚÕ.\n"
-#~ "\n"
-#~ "   * íÁÓËÁ ÓÅÔÉ: \"255.255.255.0\" - ÏÂÙÞÎÏ ÈÏÒÏÛÉÊ ×ÙÂÏÒ. åÓÌÉ ×Ù ÎÅ "
-#~ "ÚÎÁÅÔÅ ÉÌÉ ÎÅ Õ×ÅÒÅÎÙ, ÞÔÏ ÎÕÖÎÏ ××ÅÓÔÉ,\n"
-#~ "     ÓÐÒÏÓÉÔÅ ÁÄÍÉÎÉÓÔÒÁÔÏÒÁ ×ÁÛÅÊ ÓÅÔÉ.\n"
-#~ "\n"
-#~ "   * á×ÔÏÍÁÔÉÞÅÓËÉÊ IP: ÅÓÌÉ × ×ÁÛÅÊ ÓÅÔÉ ÉÓÐÏÌØÚÕÀÔÓÑ ÐÒÏÔÏËÏÌÙ BOOTP "
-#~ "ÉÌÉ DHCP, ×ÙÂÅÒÉÔÅ ÜÔÏÔ ×ÁÒÉÁÎÔ. åÓÌÉ ÏÎ ×ÙÂÒÁÎ, ÚÎÁÞÅÎÉÅ, ÕËÁÚÁÎÎÏÅ ×\n"
-#~ "    \"IP ÁÄÒÅÓ\" ÂÕÄÅÔ ÐÒÏÉÇÎÏÒÉÒÏ×ÁÎÏ. åÓÌÉ ×Ù ÎÅ ÚÎÁÅÔÅ ÉÌÉ ÎÅ Õ×ÅÒÅÎÙ "
-#~ "× ÎÅÏÂÈÏÄÉÍÏÓÔÉ ×ÙÂÏÒÁ ÜÔÏÇÏ ×ÁÒÉÁÎÔÁ, ÓÐÒÏÓÉÔÅ ÁÄÍÉÎÉÓÔÒÁÔÏÒÁ ×ÁÛÅÊ ÓÅÔÉ."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ××ÅÓÔÉ ÉÍÑ ×ÁÛÅÇÏ ËÏÍÐØÀÔÅÒÁ, ÅÓÌÉ ÎÕÖÎÏ. åÓÌÉ ×Ù ÎÅ "
-#~ "ÚÎÁÅÔÅ ÉÌÉ \n"
-#~ "ÎÅ Õ×ÅÒÅÎÙ × ÔÏÍ, ÞÔÏ ÎÕÖÎÏ ××ÅÓÔÉ, ÓÐÒÏÓÉÔÅ ÁÄÍÉÎÉÓÔÒÁÔÏÒÁ ×ÁÛÅÊ ÓÅÔÉ."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ××ÅÓÔÉ ÉÍÑ ×ÁÛÅÇÏ ËÏÍÐØÀÔÅÒÁ, ÅÓÌÉ ÎÕÖÎÏ. åÓÌÉ ×Ù ÎÅ "
-#~ "ÚÎÁÅÔÅ\n"
-#~ "ÉÌÉ ÎÅ Õ×ÅÒÅÎÙ × ÔÏÍ, ÞÔÏ ÎÕÖÎÏ ××ÅÓÔÉ, ÏÓÔÁ×ØÔÅ ÐÏÌÅ ÎÅÚÁÐÏÌÎÅÎÎÙÍ."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "ôÅÐÅÒØ ÍÏÖÎÏ ××ÅÓÔÉ ÐÁÒÁÍÅÔÒÙ ÄÏÚ×ÏÎÁ (dialup). åÓÌÉ ×Ù ÎÅ ÚÎÁÅÔÅ, ÞÔÏ "
-#~ "××ÅÓÔÉ, \n"
-#~ "ÐÒÁ×ÉÌØÎÕÀ ÉÎÆÏÒÍÁÃÉÀ ÍÏÖÎÏ ÐÏÌÕÞÉÔØ Õ Ó×ÏÅÇÏ ÐÒÏ×ÁÊÄÅÒÁ ÉÎÔÅÒÎÅÔ (ISP)."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "åÓÌÉ ÂÕÄÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÓÅÒ×ÅÒÁ proxy, ÎÁÓÔÒÏÊÔÅ ÉÈ ÓÅÊÞÁÓ. åÓÌÉ ÎÅ "
-#~ "ÚÎÁÅÔÅ,\n"
-#~ "ÎÕÖÎÏ ÌÉ ÜÔÏ, ÏÂÒÁÔÉÔÅÓØ Ë ÁÄÍÉÎÉÓÔÒÁÔÏÒÕ ÓÅÔÉ ÉÌÉ ÉÎÔÅÒÎÅÔ ÐÒÏ×ÁÊÄÅÒÕ."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "÷Ù ÍÏÖÅÔÅ ÕÓÔÁÎÏ×ÉÔØ ÐÁËÅÔ ÛÉÆÒÏ×ÁÎÉÑ, ÅÓÌÉ ×ÁÛÅ ÓÏÅÄÉÎÅÎÉÅ c ÉÎÔÅÒÎÅÔ "
-#~ "ÕÖÅ\n"
-#~ "ÐÒÁ×ÉÌØÎÏ ÎÁÓÔÒÏÅÎÏ. óÎÁÞÁÌÁ ×ÙÂÅÒÉÔÅ ÓÅÒ×ÅÒ, ÏÔËÕÄÁ ×Ù ÈÏÔÉÔÅ ÓËÁÞÁÔØ "
-#~ "ÐÁËÅÔÙ É \n"
-#~ "ÐÏÔÏÍ ×ÙÂÅÒÉÔÅ ÐÁËÅÔÙ, ËÏÔÏÒÙÅ ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ.\n"
-#~ "\n"
-#~ "\n"
-#~ "éÍÅÊÔÅ ××ÉÄÕ, ÞÔÏ ×ÁÍ ÎÕÖÎÏ ×ÙÂÉÒÁÔØ ÓÅÒ×ÅÒ É ÐÁËÅÔÙ ÛÉÆÒÏ×ÁÎÉÑ × "
-#~ "ÓÏÏÔ×ÅÔÓÔ×ÉÉ Ó ÚÁËÏÎÏÄÁÔÅÌØÓÔ×ÏÍ,\n"
-#~ "ÄÅÊÓÔ×ÕÀÝÉÍ × ×ÁÛÅÊ ÓÔÒÁÎÅ."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ÞÁÓÏ×ÏÊ ÐÏÑÓ, × ËÏÔÏÒÏÍ ×Ù ÖÉ×ÅÔÅ."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ÎÁÓÔÒÏÊÔØ ÌÏËÁÌØÎÙÊ ÐÒÉÎÔÅÒ (ÐÏÄËÌÀÞÅÎÎÙÊ Ë ×ÁÛÅÍÕ "
-#~ "ËÏÍÐØÀÔÅÒÕ) ÉÌÉ ÕÄÁÌÅÎÎÙÊ ÐÒÉÎÔÅÒ\n"
-#~ " (ÄÏÓÔÕÐÎÙÊ ÐÏ ÓÅÔÉ Unix, Netware ÉÌÉ Microsoft Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "åÓÌÉ ×Ù ÈÏÔÉÔÅ ×ÙÐÏÌÎÑÔØ ÐÅÞÁÔØ, ×ÙÂÅÒÉÔÅ ÓÉÔÅÍÕ ÐÅÞÁÔÉ - \n"
-#~ "CUPS ÉÌÉ LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS - ÎÏ×ÁÑ, ÍÏÝÎÁÑ É ÇÉÂËÁÑ ÓÉÓÔÅÍÁ ÐÅÞÁÔÉ ÄÌÑ Unix ÓÉÓÔÅÍ (CUPS\n"
-#~ "ÏÚÎÁÞÁÅÔ \"ïÂÙÞÎÁÑ óÉÓÔÅÍÁ ðÅÞÁÔÉ Unix\"). üÔÁ ÓÉÓÔÅÍÁ ÉÓÐÏÌØÚÕÅÔÓÑ ×\n"
-#~ "Mandrake Linux ÐÏ ÕÍÏÌÞÁÎÉÀ.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR - ÓÔÁÒÁÑ ÓÉÓÔÅÍÁ ÐÅÞÁÔÉ, ÉÓÐÏÌØÚÏ×Á×ÛÁÑÓÑ × ÐÒÅÄÙÄÕÝÉÈ ÄÉÓÔÒÉÂÕÔÉ×ÁÈ "
-#~ "Mandrake Linux .\n"
-#~ "\n"
-#~ "\n"
-#~ "åÓÌÉ Õ ×ÁÓ ÎÅÔ ÐÒÉÎÔÅÒÁ, ×ÙÂÅÒÉÔÅ \"ïÔÓÕÔÓÔ×ÕÅÔ\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "÷ GNU/Linux ÍÏÖÅÔ ÉÓÐÏÌØÚÏ×ÁÔØÓÑ ÍÎÏÇÏ ÔÉÐÏ× ÐÒÉÎÔÅÒÏ×. ëÁÖÄÙÊ ÔÉÐ "
-#~ "ÔÒÅÂÕÅÔ\n"
-#~ "ÒÁÚÎÏÊ ÎÁÓÔÒÏÊËÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "åÓÌÉ ×ÁÛ ÐÒÉÎÔÅÒ ÆÉÚÉÞÅÓËÉ ÐÏÄËÌÀÞÅÎ Ë ×ÁÛÅÍÕ ËÏÍÐØÀÔÅÒÕ, ×ÙÂÅÒÉÔÅ "
-#~ "\"ìÏËÁÌØÎÙÊ\n"
-#~ "ÐÒÉÎÔÅÒ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "åÓÌÉ ×Ù ÈÏÔÉÔÅ ÐÏÌÕÞÉÔØ ÄÏÓÔÕÐ Ë ÐÒÉÎÔÅÒÕ ÎÁ ÕÄÁÌÅÎÎÏÊ Unix ÍÁÛÉÎÅ, "
-#~ "×ÙÂÅÒÉÔÅ\n"
-#~ "\"õÄÁÌÅÎÎÙÊ ÐÒÉÎÔÅÒ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "åÓÌÉ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÐÒÉÎÔÅÒ, ÐÏÄËÌÀÞÅÎÎÙÊ Ë ÕÄÁÌÅÎÎÏÊ ÍÁÛÉÎÅ Ó "
-#~ "Microsoft Windows \n"
-#~ "(ÉÌÉ ÍÁÛÉÎÅ Ó Unix, ÉÓÐÏÌØÚÕÑ SMB ÐÒÏÔÏËÏÌ), ×ÙÂÅÒÉÔÅ \"SMB/Windows 95/98/"
-#~ "NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "ðÏÖÁÌÕÊÓÔÁ, ÐÅÒÅÄ ÐÒÏÄÏÌÖÅÎÉÅÍ ÎÁÓÔÒÏÊËÉ ×ËÌÀÞÉÔÅ ×ÁÛ ÐÒÉÎÔÅÒ, ÞÔÏÂÙ "
-#~ "DrakX ÓÍÏÇ ÅÇÏ ÏÐÒÅÄÅÌÉÔØ.\n"
-#~ "\n"
-#~ "óÅÊÞÁÓ ÷ÁÍ ÐÏÔÒÅÂÕÅÔÓÑ ××ÅÓÔÉ ÎÅËÏÔÏÒÕÀ ÉÎÆÏÒÍÁÃÉÀ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * éÍÑ ÐÒÉÎÔÅÒÁ: ÍÅÎÅÄÖÅÒ ÐÅÞÁÔÉ (spooler) \"lp\" ËÁË ÉÍÑ ÐÒÉÎÔÅÒÁ ÐÏ "
-#~ "ÕÍÏÌÞÁÎÉÀ. ðÏÜÔÏÍÕ, Õ ×ÁÓ ÄÏÌÖÅÎ ÂÙÔØ ÐÒÉÎÔÅÒ Ó ÉÍÅÎÅÍ \"lp\".\n"
-#~ "     åÓÌÉ Õ ×ÁÓ ÔÏÌØËÏ ÏÄÉÎ ÐÒÉÎÔÅÒ, ×Ù ÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÎÅÓËÏÌØËÏ "
-#~ "ÉÍÅÎ ÄÌÑ ÎÅÇÏ. ÷Ù ÐÒÏÓÔÏ ÄÏÌÖÎÙ ÒÁÚÄÅÌÉÔØ ÉÈ ÓÉÍ×ÏÌÏÍ\n"
-#~ "     \"|\". ðÏÜÔÏÍÕ, ÅÓÌÉ ×Ù ÐÒÅÄÐÏÞÉÔÁÅÔÅ ÓÍÙÓÌÏ×ÏÅ ÉÍÑ, ÅÇÏ ÎÕÖÎÏ "
-#~ "ÐÏÍÅÓÔÉÔØ ÐÅÒ×ÙÍ, ÎÁÐÒÉÍÅÒ: \"íÏÊ ÐÒÉÎÔÅÒ|lp\".\n"
-#~ "     ðÒÉÎÔÅÒ, ÓÏÄÅÒÖÁÝÉÊ \"lp\" × ÓÏ×ÅÍ ÉÍÅÎÉ ÉÌÉ ÉÍÅÎÁÈ, ÂÕÄÅÔ ÐÒÉÎÔÅÒÏÍ "
-#~ "ÐÏ ÕÍÏÌÞÁÎÉÀ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ïÐÉÓÁÎÉÅ: ÜÔÏ ÕËÁÚÙ×ÁÔØ ÎÅÏÂÑÚÁÔÅÌØÎÏ, ÎÏ ÍÏÖÅÔ ÏËÁÚÁÔØÓÑ ÐÏÌÅÚÎÙÍ "
-#~ "ÅÓÌÉ ÎÅÓËÏÌØËÏ ÐÒÉÎÔÒÏ× ÐÏÄËÌÀÞÅÎÙ Ë ×ÁÛÅÍÕ ËÏÍÐØÀÔÅÒÕ ÉÌÉ ÅÓÌÉ ×Ù "
-#~ "ÒÁÚÒÅÛÁÅÔÅ\n"
-#~ "     ÄÒÕÇÉÍ ËÏÍÐØÀÔÅÒÁÍ ÉÓÐÏÌØÚÏ×ÁÔØ ×ÁÛ ÐÒÉÎÔÅÒ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * òÁÓÐÏÌÏÖÅÎÉÅ: ÅÓÌÉ ×Ù ÈÏÔÉÔÅ ÕËÁÚÁÔØ ËÁËÕÀ-ÌÉÂÏ ÉÎÆÏÒÍÁÃÉÀ Ï "
-#~ "ÒÁÓÐÏÌÏÖÅÎÉÉ\n"
-#~ "     ×ÁÛÅÇÏ ÐÒÉÎÔÅÒÁ, ÎÁÐÉÛÉÔÅ ÅÅ ÚÄÅÓØ (ÐÉÓÁÔØ ÍÏÖÅÔÅ ×ÓÅ, ÞÔÏ ÕÇÏÄÎÏ\n"
-#~ "     , ÎÁÐÒÉÍÅÒ \"2ÏÊ ÜÔÁÖ\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ×ÁÍ ÐÏÔÒÅÂÕÅÔÓÑ ××ÅÓÔÉ ÎÅËÏÔÏÒÕÀ ÉÎÆÏÒÍÁÃÉÀ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * éÍÑ ÏÞÅÒÅÄÉ ÐÅÞÁÔÉ: ÍÅÎÅÄÖÅÒ ÐÅÞÁÔÉ ÉÓÐÏÌØÚÕÅÔ \"lp\" × ËÁÞÅÓÔ×Å "
-#~ "ÉÍÅÎÉ ÐÏ ÕÍÏÌÞÁÎÉÀ. ðÏÜÔÏÍÕ Õ ×ÁÓ ÄÏÌÖÅÎ ÂÙÔØ ÐÒÉÎÔÅÒ Ó ÉÍÅÎÍ \"lp\".\n"
-#~ "    åÓÌÉ Õ ×ÁÓ ÔÏÌØËÏ ÏÄÉÎ ÐÒÉÎÔÅÒ, ×Ù ÍÏÖÅÔÅ ÚÁÄÁÔØ ÄÌÑ ÎÅÇÏ ÎÅÓËÏÌØËÏ "
-#~ "ÉÍÅÎ. ðÒÏÓÔÏ ÒÁÚÄÅÌÉÔÅ ÉÍÅÎÁ ÓÉÍ×ÏÌÏÍ\n"
-#~ "    \"|\". ôÁË, ÅÓÌÉ ×Ù ÐÒÅÄÐÏÞÉÔÁÅÔÅ ÂÏÌÅÅ ÏÓÍÙÓÌÅÎÎÏÅ ÉÍÑ, ÔÏ ÐÏÍÅÓÔÉÔÅ "
-#~ "ÅÇÏ ÐÅÒ×ÙÍ, ÎÁÐÒÉÍÅÒ: \"íÏÊ ÐÒÉÎÔÅÒ|lp\".\n"
-#~ "    ðÒÉÎÔÅÒ, ÓÏÄÅÒÖÁÝÉÊ × ÉÍÅÎÉ ÌÉÂÏ ÉÍÅÎÁÈ \"lp\" ÂÕÄÅÔ ÐÒÉÎÔÅÒÏÍ ÐÏ "
-#~ "ÕÍÏÌÞÁÎÉÀ.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * ëÁÔÁÌÏÇ ÏÞÅÒÅÄÉ: × ÜÔÏÍ ËÁÔÁÌÏÇÅ ÂÕÄÕÔ ÈÒÁÎÉÔØÓÑ ×ÓÅ ÚÁÄÁÎÉÑ ÎÁ "
-#~ "ÐÅÞÁÔØ. ïÓÔÁ×ØÔÅ ×ÙÂÏÒ ÐÏ ÕÍÏÌÞÁÎÉÀ,\n"
-#~ "     ÅÓÌÉ ×Ù ÎÅ ÚÎÁÅÔÅ, ËÁËÏÊ ËÁÔÁÌÏÇ ÕËÁÚÁÔØ\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ôÉÐ ÐÏÄËÌÀÞÅÎÉÑ: åÓÌÉ ×ÁÛ ÐÒÉÎÔÅÒ ÆÉÚÉÞÅÓËÉ ÐÒÉÓÏÅÄÉÎÅÎ Ë ×ÁÛÅÍÕ "
-#~ "ËÏÍÐØÀÔÅÒÕ, ×ÙÂÅÒÉÔÅ \"ìÏËÁÌØÎÙÊ ÐÒÉÎÔÅÒ\".\n"
-#~ "     åÓÌÉ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÐÒÉÎÔÅÒ, ÐÏÄËÌÀÞÅÎÎÙÊ Ë ÕÄÁÌÅÎÎÏÊ Unix "
-#~ "ÍÁÛÉÎÅ, ×ÙÂÅÒÉÔÅ \"õÄÁÌÅÎÎÙÊ lpd ÐÒÉÎÔÅÒ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     åÓÌÉ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÐÒÉÎÔÅÒ, ÐÏÄËÌÀÞÅÎÎÙÊ Ë ÕÄÁÌÅÎÎÏÊ "
-#~ "Microsoft Windows ÍÁÛÉÎÅ (ÉÌÉ Ë ÍÁÛÉÎÅ Unix ÉÓÐÏÌØÚÕÀÑ SMB\n"
-#~ "     ÐÒÏÔÏËÏÌ), ×ÙÂÅÒÉÔÅ \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     åÓÌÉ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÐÒÉÎÔÅÒ, ÒÁÓÐÏÌÏÖÅÎÎÙÊ × ÌÏËÁÌØÎÏÊ ÓÅÔÉ "
-#~ "NetWare, ×ÙÂÅÒÉÔÅ \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "÷ÁÛ ÐÒÉÎÔÅÒ ÎÅ ÏÂÎÁÒÕÖÅÎ. ÷×ÅÄÉÔÅ ÉÍÑ ÕÓÔÒÏÊÓÔ×Á, Ë ËÏÔÏÒÏÍÕ ÏÎ "
-#~ "ÐÏÄËÌÀÞÅÎ\n"
-#~ ".\n"
-#~ "\n"
-#~ "\n"
-#~ "äÌÑ ÓÐÒÁ×ËÉ - ÂÏÌØÛÉÎÓÔ×Ï ÐÒÉÎÔÅÒÏ× ÐÏÄËÌÀÞÁÀÔÓÑ Ë ÐÅÒ×ÏÍÕ ÐÁÒÁÌÌÅÌØÎÏÍÕ "
-#~ "ÐÏÒÔÕ. ÷ GNU/Linux\n"
-#~ "ÏÎ ÎÁÚÙ×ÁÅÔÓÑ \"/dev/lp0\", × Microsoft Windows - \"LPT1\" ."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "óÅÊÞÁÓ ×ÁÍ ÎÕÖÎÏ ×ÙÂÒÁÔØ ×ÁÛ ÐÒÉÎÔÅÒ ÉÚ ÐÒÉ×ÅÄÅÎÎÏÇÏ ÓÐÉÓËÁ."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "ðÏÖÁÌÕÊÓÔÁ ×ÙÂÅÒÉÔÅ ÐÒÁ×ÉÌØÎÙÅ ÎÁÓÔÒÏÊËÉ, ÓÏÏÔ×ÅÔÓ×ÕÀÝÉÅ ×ÁÛÅÍÕ "
-#~ "ÐÒÉÎÔÅÒÕ.\n"
-#~ "ðÏÖÁÌÕÊÓÔÁ ÐÒÏÞÉÔÁÊÔÅ ÄÏËÕÍÅÎÔÁÃÉÀ ÎÁ ÐÒÉÎÔÅÒ, ÅÓÌÉ ×Ù ÎÅ ÚÁÎÅÔÅ, ÞÔÏ "
-#~ "ÕËÁÚÁÔØ.\n"
-#~ "\n"
-#~ "\n"
-#~ "õ ×ÁÓ ÂÕÄÅÔ ×ÏÚÍÏÖÎÏÓÔØ ÐÒÏÔÅÓÔÉÒÏ×ÁÔØ ×ÁÛÉ ÎÁÓÔÒÏÊËÉ ÎÁ ÓÌÅÄÕÀÝÅÍ ÜÔÁÐÅ "
-#~ "É ×Ù ÓÍÏÖÅÔÅ ÉÚÍÅÎÉÔØ ÉÈ, ÅÓÌÉ ÐÒÉÎÔÅÒ ÂÕÄÅÔ ÒÁÂÏÔÁÔØ ÎÅËÏÒÒÅËÔÎÏ."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ××ÅÓÔÉ ÐÁÒÏÌØ ÐÏÌØÚÏ×ÁÔÅÌÑ root ÄÌÑ ×ÁÛÅÊ Mandrake Linux "
-#~ "ÓÉÓÔÅÍÙ.\n"
-#~ "ðÁÒÏÌØ ÎÕÖÎÏ ××ÅÓÔÉ Ä×ÁÖÄÙ, ÞÔÏÂÙ ÕÂÅÄÉÔØÓÑ, ÞÔÏ ÏÂÁ ÐÁÒÏÌÑ ÓÏ×ÐÁÄÁÀÔ .\n"
-#~ "\n"
-#~ "\n"
-#~ "ðÏÌØÚÏ×ÁÔÅÌØ root - ÜÔÏ ÓÉÓÔÅÍÎÙÊ ÁÄÍÉÎÉÓÔÒÁÔÏÒ É ÅÄÉÎÓÔ×ÅÎÎÙÊ "
-#~ "ÐÏÌØÚÏ×ÁÔÅÌØ, ËÔÏÒÏÍÕ\n"
-#~ "ÒÁÚÒÅÛÅÎÏ ÉÚÍÅÎÑÔØ ËÏÎÆÉÇÕÒÁÃÉÀ ÓÉÓÔÅÍÙ. óÌÅÄÏ×ÁÔÅÌØÎÏ, ×ÎÉÍÁÔÅÌØÎÏ "
-#~ "×ÙÂÉÒÁÊÔÅ ÐÁÒÏÌØ. \n"
-#~ "éÓÐÏÌØÚÏ×ÁÎÉÅ ÕÞÅÔÎÏÊ ÚÁÐÉÓÉ root ÐÏÓÔÏÒÏÎÎÉÍÉ ÌÉÃÁÍÉ ÍÏÖÅÔ ÂÙÔØ "
-#~ "Ó×ÅÒÈÏÐÁÓÎÙÍ ÄÌÑ ÃÅÌÏÓÔÎÏÓÔÉ\n"
-#~ "ÓÉÓÔÅÍÙ, ÅÅ ÄÁÎÎÙÈ É ÄÒÕÇÉÈ ÓÉÓÔÅÍ, ÓÏÅÄÉÎÅÎÎÙÈ Ó ÎÅÊ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ðÁÒÏÌØ ÄÏÌÖÅÎ ÓÏÓÔÏÑÔØ ÉÚ ÂÕË× É ÃÉÆÒ É ÂÙÔØ ËÁË ÍÉÎÉÍÕÍ 8\n"
-#~ "ÓÉÍ×ÏÌÏ× ÄÌÉÎÎÏÊ. åÇÏ ÎÉËÏÇÄÁ É ÎÉËÕÄÁ ÎÅÌØÚÑ ÚÁÐÉÓÙ×ÁÔØ.\n"
-#~ "\n"
-#~ "\n"
-#~ "îÅ ÓÔÏÉÔ ÄÅÌÁÔØ ÅÇÏ ÓÌÉÛËÏÍ ÄÌÉÎÎÙÍ ÉÌÉ ÓÌÏÖÎÙÍ: ×Ù ÄÏÌÖÎÙ ×ÓÐÏÍÉÎÁÔØ ÅÇÏ "
-#~ "ÂÅÚ\n"
-#~ "ÏÓÏÂÙÈ ÕÓÉÌÉÊ."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "ôÅÐÅÒØ ×Ù ÍÏÖÅÔÅ ÓÏÚÄÁÔØ ÏÄÎÕ ÉÌÉ ÎÅÓËÏÌØËÏ \"ÏÂÙÞÎÙÈ\" ÕÞÅÔÎÙÈ ÚÁÐÉÓÅÊ "
-#~ "ÄÌÑ ÐÏÌØÚÏ×ÁÔÅÌÅÊ\n"
-#~ ", × ÏÔÌÉÞÉÅ ÏÔ \"ÐÒÉ×ÉÌÅÇÉÒÏ×ÁÎÎÏÊ\" ÕÞÅÔÎÏÊ ÚÁÐÉÓÉ root. íÏÖÎÏ\n"
-#~ "ÓÏÚÄÁÔØ ÏÄÎÕ ÉÌÉ ÎÅÓËÏÌØËÏ ÕÞÅÔÎÙÈ ÚÁÐÉÓÅÊ ÄÌÑ ËÁÖÄÏÇÏ ÐÏÌØÚÏ×ÁÔÅÌÑ,\n"
-#~ "ËÏÔÏÒÙÊ ÂÕÄÅÔ ÒÁÂÏÔÁÔØ ÎÁ ËÏÍÐØÀÔÅÒÅ. äÌÑ ËÁÖÄÏÊ ÕÞÅÔÎÏÊ ÚÁÐÉÓÉ "
-#~ "ÐÏÌØÚÏ×ÁÔÅÌÑ\n"
-#~ "ÓÏÚÄÁÀÔÓÑ Ó×ÏÉ ÎÁÓÔÒÏÊËÉ (ÇÒÁÆÉÞÅÓËÏÅ ÏËÒÕÖÅÎÉÅ, ÎÁÓÔÒÏÊËÉ ÐÒÏÇÒÁÍÍ, É Ô."
-#~ "Ä.)\n"
-#~ "É Ó×ÏÊ \"ÄÏÍÁÛÎÉÊ ËÁÔÁÌÏÇ\", × ËÏÔÏÒÏÍ ÈÒÁÎÑÔÓÑ ÜÔÉ \n"
-#~ "ÎÁÓÔÒÏÊËÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ðÒÅÖÄÅ ×ÓÅÇÏ ÓÏÚÄÁÊÔÅ ÕÞÅÔÎÕÀ ÚÁÐÉÓØ ÄÌÑ ÓÅÂÑ! äÁÖÅ ÅÓÌÉ ×Ù ÂÕÄÅÔÅ "
-#~ "ÅÄÉÎÓÔ×ÅÎÎÙÍ\n"
-#~ "ÐÏÌØÚÏ×ÁÔÅÌÅÍ ÎÁ ÍÁÛÉÎÅ, ÎÅ ÓÌÅÄÕÅÔ ×ÈÏÄÉÔØ ÐÏÄ ÉÍÅÎÅÍ root\n"
-#~ "ÄÌÑ ÐÏ×ÓÅÄÎÅ×ÎÏÊ ÒÁÂÏÔÙ: ÜÔÏ ÓÌÉÛËÏÍ ÂÏÌØÛÁÑ ÕÇÒÏÚÁ ÂÅÚÏÐÁÓÎÏÓÔÉ. \n"
-#~ "íÏÖÎÏ ÒÁÚÒÕÛÉÔØ ÓÉÓÔÅÍÕ ÏÂÙÞÎÏÊ ÏÐÅÞÁÔËÏÊ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ðÏÜÔÏÍÕ ×ÈÏÄÉÔØ × ÓÉÓÔÅÍÕ ÎÁÄÏ, ÉÓÐÏÌØÚÕÑ ÕÞÅÔÎÕÀ ÚÁÐÉÓØ ÏÂÙÞÎÏÇÏ "
-#~ "ÐÏÌØÚÏ×ÁÔÅÌÑ,\n"
-#~ "ËÏÔÏÒÏÇÏ ×Ù ÓÅÊÞÁÓ É ÓÏÚÄÁÄÉÔÅ, Á ×ÈÏÄÉÔØ ËÁË root ÎÁÄÏ ÔÏÌØËÏ\n"
-#~ "× ÃÅÌÑÈ ÁÄÍÉÎÉÓÔÒÉÒÏ×ÁÎÉÑ É ÏÂÓÌÕÖÉ×ÁÎÉÑ ÓÉÓÔÅÍÙ."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "îÁÓÔÏÑÔÅÌØÎÏ ÒÅËÏÍÅÎÄÕÅÔÓÑ ÓÏÚÄÁÔØ ÚÁÇÒÕÚÏÞÎÕÀ ÄÉÓËÅÔÕ. åÓÌÉ ×Ù ÎÅ ÓÍÏÖÅÔ "
-#~ "ÚÁÇÒÕÚÉÔØ\n"
-#~ "ËÏÍÐØÀÔÅÒ, ÜÔÏ ÂÕÄÅÔ ÅÄÉÎÓÔ×ÅÎÎÙÊ ÓÐÏÓÏÂÏ ×ÏÓÓÔÁÎÏ×ÉÔØ ÓÉÓÔÅÍÕ ÂÅÚ "
-#~ "ÐÅÒÅÕÓÔÁÎÏ×ËÉ\n"
-#~ "."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "ÏÓÎÏ×ÎÙÅ ÐÁÒÁÍÅÔÒÙ LILO É grub:\n"
-#~ "  - úÁÇÒÕÚÏÞÎÏÅ ÕÓÔÒÏÊÓÔ×Ï: õËÁÚÙ×ÁÅÔÓÑ ÉÍÑ ÕÓÔÒÏÊÓÔ×Á (ÎÁÐÒÉÍÅÒ, ÒÁÚÄÅÌ "
-#~ "ÖÅÓÔËÏÇÏ ÄÉÓËÁ,\n"
-#~ "ËÏÔÏÒÏÅ ÓÏÄÅÒÖÉÔ ÚÁÇÒÕÚÏÞÎÙÊ ÓÅËÔÏÒ. åÓÌÉ ×Ù ÎÅ ÄÅÌÁÅÔÅ ÏÓÏÚÎÁÎÎÏ ÄÒÕÇÏÊ "
-#~ "×ÙÂÏÒ, ÔÏ\n"
-#~ "×ÙÂÉÒÁÊÔÅ \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - úÁÄÅÒÖËÁ ÐÅÒÅÄ ÚÁÇÒÕÚËÏÊ ÏÂÒÁÚÁ ÐÏ ÕÍÏÌÞÁÎÉÀ: úÁÄÁÅÔ ÞÉÓÌÏ × ÄÅÓÑÔÙÈ\n"
-#~ "ÄÏÌÑÈ ÓÅËÕÎÄÙ × ÔÅÞÅÎÉÅ ËÏÔÏÒÙÈ ÎÁÞÁÌØÎÙÊ ÚÁÇÒÕÚÞÉË ÖÄÅÔ ÐÅÒÅÄ ÚÁÇÒÕÚËÏÊ "
-#~ "ÐÅÒ×ÏÇÏ ÏÂÒÁÚÁ.\n"
-#~ "üÔÏ ÐÏÌÅÚÎÏ ÄÌÑ ÓÉÓÔÅÍ, ÓÒÁÚÕ ÚÁÇÒÕÖÁÅÍÙÈ Ó ÖÅÓÔËÏÇÏ ÄÉÓËÁ ÓÒÁÚÕ ÐÏÓÌÅ\n"
-#~ "×ËÌÀÞÅÎÉÑ ËÌÁ×ÉÁÔÕÒÙ. úÁÇÒÕÚÞÉË ÎÅ ÖÄÅÔ, ÅÓÌÉ \"ÚÁÄÅÒÖËÁ\" \n"
-#~ "ÎÅ ÕÓÔÁÎÏ×ÌÅÎÁ, ÉÌÉ ÒÁ×ÎÁ ÎÕÌÀ."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO - ÜÔÏ ÄÉÓÐÅÔÞÅÒ ÚÁÇÒÕÚËÉ ÄÌÑ SPARC: \n"
-#~ "ÏÎ ÓÐÏÓÏÂÅÎ ÚÁÇÒÕÚÉÔØ GNU/Linux ÉÌÉ ÌÀÂÕÀ ÄÒÕÇÕÀ ïó, ÕÓÔÁÎÏ×ÌÅÎÎÕÀ ÎÁ "
-#~ "ÍÁÛÉÎÅ.\n"
-#~ "ïÂÙÞÎÏ ÜÔÉ ÄÒÕÇÉÅ ÏÐÅÒÁÃÉÏÎÎÙÅ ÓÉÓÔÅÍÙ ËÏÒÒÅËÔÎÏ ÒÁÓÐÏÚÎÁÀÔÓÑ É "
-#~ "ÕÓÔÁÎÁ×ÌÉ×ÁÀÔÓÑ.\n"
-#~ "åÓÌÉ ÜÔÏÇÏ ÎÅ ÐÒÏÉÚÏÛÌÏ, ×Ù ÍÏÖÅÔÅ ÄÏÂÁ×ÉÔØ ÐÕÎËÔ ×ÒÕÞÎÕÀ ÎÁ ÜÔÏÍ "
-#~ "ÜËÒÁÎÅ.\n"
-#~ "âÕÄØÔÅ ×ÎÉÍÁÔÅÌØÎÙ ÐÒÉ ÚÁÄÁÎÉÉ ÐÁÒÁÍÅÔÒÏ×.\n"
-#~ "\n"
-#~ "\n"
-#~ "÷ÏÚÍÏÖÎÏ ÔÁËÖÅ, ÞÔÏ ×Ù ÎÅ ÈÏÔÉÔÅ ÎÉËÏÍÕ ÄÁ×ÁÔØ ÄÏÓÔÕÐ Ë ÜÔÉÍ ïó, × ÔÁËÏÍ "
-#~ "ÓÌÕÞÁÅ ÍÏÖÎÏ ÕÄÁÌÉÔØ ÓÏÏÔ×ÅÔÓÔ×ÕÀÝÉÅ ÐÕÎËÔÙ. îÏ × ÜÔÏÍ ÓÌÕÞÁÅ ÄÌÑ ÉÈ "
-#~ "ÚÁÇÒÕÚËÉ ÐÏÔÒÅÂÕÅÔÓÑ ÚÁÇÒÕÚÏÞÎÁÑ ÄÉÓËÅÔÁ!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "ÏÓÎÏ×ÎÙÅ ÐÁÒÁÍÅÔÒÙ SILO:\n"
-#~ "  - õÓÔÁÎÏ×ËÁ ÚÁÇÒÕÚÞÉËÁ: õËÁÖÉÔÅ, ÇÄÅ ×Ù ÈÏÔÉÔÅ ÒÁÚÍÅÓÔÉÔØ ÉÎÆÏÒÍÁÃÉÀ,\n"
-#~ "ÎÅÏÂÈÏÄÉÍÕÀ ÄÌÑ ÚÁÇÒÕÚËÉ GNU/Linux. åÓÌÉ ÎÅ ÚÎÁÅÔÅ ÔÏÞÎÏ, ÞÔÏ ÄÅÌÁÅÔÅ,\n"
-#~ "×ÙÂÉÒÁÊÔÅ \"ðÅÒ×ÙÊ ÓÅËÔÏÒ ÕÓÔÒÏÊÓÔ×Á (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - úÁÄÅÒÖËÁ ÐÅÒÅÄ ÚÁÇÒÕÚËÏÊ ÏÂÒÁÚÁ ÐÏ ÕÍÏÌÞÁÎÉÀ: úÁÄÁÅÔ ÞÉÓÌÏ × ÄÅÓÑÔÙÈ\n"
-#~ "ÄÏÌÑÈ ÓÅËÕÎÄÙ × ÔÅÞÅÎÉÅ ËÏÔÏÒÙÈ ÚÁÇÒÕÚÞÉË ÖÄÅÔ ÐÅÒÅÄ ÚÁÇÒÕÚËÏÊ ÐÅÒ×ÏÇÏ "
-#~ "ÏÂÒÁÚÁ.\n"
-#~ "üÔÏ ÐÏÌÅÚÎÏ ÄÌÑ ÓÉÓÔÅÍ, ÚÁÇÒÕÖÁÅÍÙÈ Ó ÖÅÓÔËÏÇÏ ÄÉÓËÁ ÓÒÁÚÕ ÐÏÓÌÅ\n"
-#~ "×ËÌÀÞÅÎÉÑ ËÌÁ×ÉÁÔÕÒÙ. úÁÇÒÕÚÞÉË ÎÅ ÖÄÅÔ, ÅÓÌÉ \"ÚÁÄÅÒÖËÁ\" \n"
-#~ "ÎÅ ÕËÁÚÁÎÁ ÉÌÉ ÒÁ×ÎÁ ÎÕÌÀ."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "ôÅÐÅÒØ ÎÕÖÎÏ ÎÁÓÔÒÏÉÔØ X Window System, ËÏÔÏÒÁÑ Ñ×ÌÑÅÔÓÑ\n"
-#~ "ÏÓÎÏ×ÏÊ GNU/Linux GUI (çÒÁÆÉÞÅÓËÉÊ ðÏÌØÚÏ×ÁÔÅÌØÓËÉÊ éÎÔÅÒÆÅÊÓ). äÌÑ ÜÔÏÊ\n"
-#~ "ÃÅÌÉ ÎÁÄÏ ÎÁÓÔÒÏÉÔØ ×ÉÄÅÏËÁÒÔÕ É ÍÏÎÉÔÏÒ. âÏÌØÛÁÑ ÞÁÓÔØ ÜÔÉÈ ÛÁÇÏ×\n"
-#~ "Á×ÔÏÍÁÔÉÚÉÒÏ×ÁÎÁ, ÔÁË ÞÔÏ ×ÁÛÁ ÒÁÂÏÔÁ ÍÏÖÅÔ Ó×ÅÓÔÉÓØ Ë ÐÒÏ×ÅÒËÅ\n"
-#~ "ÒÅÚÕÌØÔÁÔÏ× ÎÁÓÔÒÏÊËÉ É ÐÏÄÔ×ÅÒÖÄÅÎÉÀ ×ÙÂÒÁÎÎÙÈ ÕÓÔÁÎÏ×ÏË :)\n"
-#~ "\n"
-#~ "\n"
-#~ "ëÏÇÄÁ ËÏÎÆÉÇÕÒÉÒÏ×ÁÎÉÅ ÚÁ×ÅÒÛÉÔÓÑ, ÂÕÄÅÔ ÚÁÐÕÝÅÎ X (ÅÓÌÉ ×Ù ÎÅ\n"
-#~ "ÐÏÐÒÏÓÉÔÅ DrakX ÎÅ ÄÅÌÁÔØ ÜÔÏÇÏ) ÞÔÏÂÙ ×Ù ÍÏÇÌÉ ÐÒÏ×ÅÒÉÔØ, ÕÓÔÒÁÉ×ÁÀÔ\n"
-#~ "ÌÉ ×ÁÓ ÕÓÔÁÎÏ×ËÉ. åÓÌÉ ÎÅÔ, ×Ù ÍÏÖÅÔÅ ×ÅÒÎÕÔØÓÑ É ÉÚÍÅÎÑÔØ ÉÈ\n"
-#~ "ÓËÏÌØËÏ ×ÁÍ ÕÇÏÄÎÏ."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "åÓÌÉ ÞÔÏ ÔÏ ÎÅ × ÐÏÒÑÄËÅ Ó ÎÁÓÔÒÏÊËÏÊ X, ÉÓÐÏÌØÚÕÊÔÅ ÜÔÉ ÐÁÒÁÍÅÔÒÙ ÄÌÑ\n"
-#~ "ËÏÒÒÅËÔÎÏÊ ÎÁÓÔÒÏÊËÉ X Window System."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "åÓÌÉ ×Ù ÐÒÅÄÐÏÞÉÔÁÅÔÅ ÇÒÁÆÉÞÅÓËÉÊ ×ÈÏÄ (login), ÷ÙÂÅÒÉÔÅ \"äÁ\". éÎÁÞÅ "
-#~ "- \n"
-#~ "\"îÅÔ\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "÷Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ÕÒÏ×ÅÎØ ÂÅÚÏÐÁÓÎÏÓÔÉ ÄÌÑ ×ÁÛÅÊ ÓÉÓÔÅÍÙ. ðÏÄÒÏÂÎÕÀ "
-#~ "ÉÎÆÏÒÍÁÃÉÀ ÍÏÖÎÏ\n"
-#~ "  ÎÁÊÔÉ × ÒÕËÏ×ÏÄÓÔ×Å. ëÁË ÏÂÙÞÎÏ, ÅÓÌÉ ×Ù ÎÅ ÚÎÁÅÔÅ, ÞÔÏ ×ÙÂÒÁÔØ, "
-#~ "ÏÓÔÁ×ØÔÅ ÕÓÔÁÎÏ×ËÉ ÐÏ ÕÍÏÌÞÁÎÉÀ.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "óÉÓÔÅÍÁ ÓÏÂÉÒÁÅÔÓÑ ÐÅÒÅÚÁÇÒÕÚÉÔØÓÑ.\n"
-#~ "\n"
-#~ "ðÏÓÌÅ ÐÅÒÅÚÁÇÒÕÚËÉ, ×ÁÛÁ ÎÏ×ÁÑ ÓÉÓÔÅÍÁ Mandrake Linux ÚÁÇÒÕÚÉÔÓÑ "
-#~ "Á×ÔÏÍÁÔÉÞÅÓËÉ.\n"
-#~ "åÓÌÉ ÈÏÔÉÔÅ ÚÁÇÒÕÚÉÔØ ÄÒÕÇÕÀ ÏÐÅÒÁÃÉÏÎÎÕÀ ÓÉÓÔÅÍÕ, ÞÉÔÁÊÔÅ \n"
-#~ "ÄÏÐÏÌÎÉÔÅÌØÎÙÅ ÉÎÓÔÒÕËÃÉÉ."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "þÅÛÓËÉÊ (ðÒÏÇÒÁÍÍÉÓÔÙ)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "óÌÏ×ÁÃËÉÊ (ðÒÏÇÒÁÍÍÉÓÔÙ)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "éÍÑ ÓÏÚÄÁ×ÁÅÍÏÇÏ ÐÒÏÆÉÌÑ:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "úÁÐÉÓÁÔØ /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "÷ÏÓÓÔÁÎÏ×ÉÔØ ÉÚ ÆÁÊÌÁ"
-
-#~ msgid "Save in file"
-#~ msgstr "óÏÈÒÁÎÉÔØ × ÆÁÊÌ"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "÷ÏÓÓÔÁÎÏ×ÉÔØ Ó ÄÉÓËÅÔÙ"
-
-#~ msgid "Format all"
-#~ msgstr "æÏÒÍÁÔÉÒÏ×ÁÔØ ×ÓÅ"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "ðÏÓÌÅ ÆÏÒÍÁÔÉÒÏ×ÁÎÉÑ ×ÓÅÈ ÒÁÚÄÅÌÏ×,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "×ÓÅ ÄÁÎÎÙÅ × ÜÔÉÈ ÒÁÚÄÅÌÁÈ ÂÕÄÕÔ ÐÏÔÅÒÑÎÙ"
-
-#~ msgid "Reload"
-#~ msgstr "ðÅÒÅÚÁÇÒÕÚÉÔØ"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "èÏÔÉÔÅ ÓÇÅÎÅÒÉÒÏ×ÁÔØ ÓÁÍÏ-ÕÓÔÁÎÁ×ÌÉ×ÁÀÝÕÀÓÑ ÄÉÓËÅÔÕ ÄÌÑ ËÌÏÎÉÒÏ×ÁÎÉÑ "
-#~ "linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "îÁÓÔÒÏÊËÁ ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "ó ÕÄÁÌÅÎÎÙÍ ÓÅÒ×ÅÒÏÍ ÐÅÞÁÔÉ CUPS, ×ÁÍ ÎÅ ÎÕÖÎÏ ÚÄÅÓØ ÎÁÓÔÒÁÉ×ÁÔØ\n"
-#~ "ÎÉËÁËÉÈ ÐÒÉÎÔÅÒÏ×; ÐÒÉÎÔÅÒÙ ÂÕÄÕÔ ÏÂÎÁÒÕÖÅÎÙ Á×ÔÏÍÁÔÉÞÅÓËÉ,\n"
-#~ "ÅÓÌÉ ÔÏÌØËÏ ×ÁÛ ÓÅÒ×ÅÒ ÎÅ ÎÁÈÏÄÉÔÓÑ × ÄÒÕÇÏÊ ÓÅÔÉ; × ÐÏÓÌÅÄÎÅÍ ÓÌÕÞÁÅ\n"
-#~ ", ×ÁÍ ÎÕÖÎÏ ÕËÁÚÁÔØ IP ÁÄÒÅÓ ÓÅÒ×ÅÒÁ CUPS \n"
-#~ "É, ×ÏÚÍÏÖÎÏ, ÎÏÍÅÒ ÐÏÒÔÁ."
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "õÄÁÌÅÎÎÁÑ ÏÞÅÒÅÄØ"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "éÍÑ ÄÏÍÅÎÁ"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "îÅÔ ÐÒÉÎÔÅÒÁ"
-
-#, fuzzy
-#~ msgid "start it"
-#~ msgstr "ÏÇÒÁÎÉÞÉÔØ"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "íÏÎÉÔÏÒÉÎÇ ÓÅÔÉ"
-
-#~ msgid "Profile "
-#~ msgstr "ðÒÏÆÉÌØ "
-
-#~ msgid "Statistics"
-#~ msgstr "óÔÁÔÉÓÔÉËÁ"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "óËÏÒÏÓÔØ ÏÔÐÒÁ×ËÉ: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "óËÏÒÏÓÔØ ÐÏÌÕÞÅÎÉÑ: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "ôÉÐ ÓÏÅÄÉÎÅÎÉÑ: "
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "óÏÅÄÉÎÑÅÍÓÑ Ó ÉÎÔÅÒÎÅÔ "
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "ïÔÓÏÅÄÉÎÑÅÍÓÑ ÏÔ ÉÎÔÅÒÎÅÔ "
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "ïÛÉÂËÁ ÏÔÓÏÅÄÉÎÉÎÅÎÉÑ ÏÔ ÉÎÔÅÒÎÅÔ."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "ïÔÓÏÅÄÉÎÅÎÉÅ ÏÔ ÉÎÔÅÒÎÅÔ ÚÁ×ÅÒÛÅÎÏ."
-
-#~ msgid "Connection complete."
-#~ msgstr "óÏÅÄÉÎÅÎÉÅ ÚÁ×ÅÒÛÅÎÏ."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "ïÛÉÂËÁ ÓÏÅÄÉÅÎÉÑ.\n"
-#~ "ðÒÏ×ÅÒØÔÅ ×ÁÛÉ ÎÁÓÔÒÏÊËÉ × ÐÁÎÅÌÉ ÕÐÒÁ×ÌÅÎÉÑ Mandrake."
-
-#, fuzzy
-#~ msgid "Color configuration"
-#~ msgstr "îÁÓÔÒÏÊËÁ"
-
-#~ msgid "sent: "
-#~ msgstr "ÏÔÐÒÁ×ÌÅÎÏ: "
-
-#~ msgid "received: "
-#~ msgstr "ÐÏÌÕÞÅÎÏ: "
-
-#~ msgid "Connect"
-#~ msgstr "óÏÅÄÉÎÅÎÉÔØÓÑ"
-
-#~ msgid "Disconnect"
-#~ msgstr "ïÔÓÏÅÄÉÎÉÔØÓÑ"
-
-#~ msgid "/File/_New"
-#~ msgstr "/æÁÊÌ/_îÏ×ÙÊ"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>N"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/æÁÊÌ/_ïÔËÒÙÔØ"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>O"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/æÁÊÌ/_óÏÈÒÁÎÉÔØ"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/æÁÊÌ/óÏÈÒÁÎÉÔØ _ëÁË"
-
-#~ msgid "/File/-"
-#~ msgstr "/æÁÊÌ/-"
-
-#~ msgid "/_Options"
-#~ msgstr "/_ðÁÒÁÍÅÔÒÙ"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/ðÁÒÁÍÅÔÒÙ/ðÒÏ×ÅÒËÁ"
-
-#~ msgid "/_Help"
-#~ msgstr "/_ðÏÍÏÝØ"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/ðÏÍÏÝØ/_ï ÐÒÏÇÒÁÍÍÅ..."
-
-#~ msgid "Default Runlevel"
-#~ msgstr "RunLevel ÐÏ ÕÍÏÌÞÁÎÉÀ"
-
-#~ msgid "Europe"
-#~ msgstr "å×ÒÏÐÁ"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "õÄÁÌÉÔØ ÏÞÅÒÅÄØ"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "îÅ ÕÄÁÅÔÓÑ ÏÂÒÁÂÏÔÁÔØ ÓÏÄÅÒÖÉÍÏÅ ÆÁÊÌÁ ÎÁÓÔÒÏÅË."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "îÅÒÁÓÐÏÚÎÁÎÎÙÊ ÆÁÊÌ ÎÁÓÔÒÏÅË"
-
-#~ msgid "Adapter"
-#~ msgstr "áÄÁÐÔÅÒ"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "÷ÙËÌÀÞÉÔØ"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "÷ËÌÀÞÉÔØ"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ÐÒÏ×ÅÒÉÔØ ×ÁÛÕ ÍÙÛØ. éÓÐÏÌØÚÕÊÔÅ ËÎÏÐËÉ É ËÏÌÅÓÉËÏ ÄÌÑ "
-#~ "ÐÒÏ×ÅÒËÉ\n"
-#~ "ÐÒÁ×ÉÌØÎÏÓÔÉ ÎÁÓÔÒÏÅË. åÓÌÉ ÏÎÉ ÎÅ ×ÅÒÎÙ, ÎÁÖÍÉÔÅ ÎÁ \"ïÔÍÅÎÁ\" ÄÌÑ "
-#~ "×ÙÂÏÒÁ\n"
-#~ "ÄÒÕÇÏÇÏ ÄÒÁÊ×ÅÒÁ."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (ÉÌÉ ADSL) ÓÏÅÄÉÎÅÎÉÅ"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "úÁËÒÙÔØ"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "÷Ù ÍÏÖÅÔÅ ÎÁÐÒÑÍÕÀ ÕËÁÚÁÔØ ÁÄÒÅÓ ÄÌÑ ÉÓÐÏÌØÚÏ×ÁÎÉÑ ÐÒÉÎÔÅÒÁ × CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "äÁ, ÎÁÐÅÞÁÔÁÔØ ÐÒÏÂÎÕÀ ÓÔÒÁÎÉÃÕ ÔÅËÓÔÁ ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "äÁ, ÎÁÐÅÞÁÔÁÔØ ÐÒÏÂÎÕÀ ÓÔÒÁÎÉÃÕ ÔÅËÓÔÁ PostScript"
-
-#~ msgid "Paper Size"
-#~ msgstr "òÁÚÍÅÒ ÂÕÍÁÇÉ"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "õÄÁÌÑÔØ ÂÕÍÁÇÕ ÐÏÓÌÅ ÐÅÞÁÔÉ?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "ðÁÒÁÍÅÔÒÙ ÄÒÁÊ×ÅÒÁ Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "ðÁÒÁÍÅÔÒÙ ÇÌÕÂÉÎÙ Ã×ÅÔÁ"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "ðÅÞÁÔÁÔØ ÔÅËÓÔ ËÁË PostScript"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "éÓÐÒÁ×ÌÑÔØ \"ÓÔÕÐÅÎÞÁÔÕÀ ÐÅÞÁÔØ\"?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "ëÏÌÉÞÅÓÔ×Ï ÓÔÒÁÎÉà ÎÁ ÌÉÓÔÅ"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "ðÒÁ×ÏÅ/ìÅ×ÏÅ ÐÏÌÅ × ÐÕÎËÔÁÈ (1/72 ÄÀÊÍÁ)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "÷ÅÒÈÎÅÅ/îÉÖÎÅÅ ÐÏÌÅ × ÐÕÎËÔÁÈ (1/72 ÄÀÊÍÁ)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "äÏÐÏÌÎÉÔÅÌØÎÙÅ ÐÁÒÁÍÅÔÒÙ ÄÌÑ GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "äÏÐÏÌÎÉÔÅÌØÎÙÅ ÐÁÒÁÍÅÔÒÙ ÄÌÑ ÔÅËÓÔÁ"
-
-#~ msgid "Reverse page order"
-#~ msgstr "ïÂÒÁÔÎÙÊ ÐÏÒÑÄÏË ÓÔÒÁÎÉÃ"
-
-#~ msgid "CUPS starting"
-#~ msgstr "úÁÐÕÓËÁÅÔÓÑ CUPS"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "÷ÙÂÏÒ ÔÉÐÁ ÕÄÁÌÅÎÎÏÇÏ ÐÏÄËÌÀÞÅÎÉÑ ÐÒÉÎÔÅÒÁ"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "ëÁÖÄÏÍÕ ÐÒÉÎÔÅÒÕ ÔÒÅÂÕÅÔÓÑ ÉÍÑ (ÎÁÐÒÉÍÅÒ, lp).\n"
-#~ "äÏÐÏÌÎÉÔÅÌØÎÙÅ ÐÁÒÁÍÅÔÒÙ, ÔÁËÉÅ ËÁË ÏÐÉÓÁÎÉÅ ÐÒÉÎÔÅÒÁ É ÅÇÏ "
-#~ "ÍÅÓÔÏÎÁÈÏÖÄÅÎÉÑ\n"
-#~ "ÔÁË ÖÅ ÍÏÇÕÔ ÂÙÔØ ÚÁÄÁÎÙ. ëÁËÏÅ ÉÍÑ ÂÕÄÅÔ ÉÓÐÏÌØÚÏ×ÁÎÏ ÄÌÑ ÄÁÎÎÏÇÏ "
-#~ "ÐÒÉÎÔÅÒÁ É\n"
-#~ "ËÁË ÏÎ ÐÏÄÓÏÅÄÉÎÅÎ?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "ëÁÖÄÁÑ ÏÞÅÒÅÄØ ÐÅÞÁÔÉ, × ËÏÔÏÒÕÀ ÐÏÍÅÝÁÀÔÓÑ ÚÁÄÁÎÉÑ ÄÌÑ ÐÅÞÁÔÉ, ÔÒÅÂÕÅÔ "
-#~ "ÕËÁÚÁÎÉÑ ÉÍÅÎÉ (ÏÂÙÞÎÏ lp) É Ó×ÑÚÁÎÎÏÇÏ Ó ÎÅÊ ËÁÔÁÌÏÇÁ ÏÞÅÒÅÄÉ ÐÅÞÁÔÉ. "
-#~ "õËÁÖÉÔÅ ÉÍÑ É ËÁÔÁÌÏÇ ÏÞÅÒÅÄÉ ÐÅÞÁÔÉ, Á ÔÁËÖÅ ÓÐÏÓÏÂ, ËÏÔÏÒÙÍ ÐÏÄÓÏÅÄÉÅÎ "
-#~ "ÐÒÉÎÔÅÒ?"
-
-#~ msgid "Name of queue"
-#~ msgstr "éÍÑ ÏÞÅÒÅÄÉ"
-
-#~ msgid "Spool directory"
-#~ msgstr "ëÁÔÁÌÏÇ spool"
-
-#, fuzzy
-#~ msgid "fsck failed: "
-#~ msgstr "ÏÛÉÂËÁ ÍÏÎÔÉÒÏ×ÁÎÉÑ: "
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "þÔÏÂÙ ÐÏ×ÙÓÉÔØ ÂÅÚÏÐÁÓÎÏÓÔØ ÓÉÓÔÅÍÙ, ÎÁÄÏ ×ÙÂÒÁÔØ \"éÓÐÏÌØÚÏ×ÁÔØ ÓËÒÙÔÙÊ "
-#~ "ÆÁÊÌ\" \n"
-#~ "É \"éÓÐÏÌØÚÏ×ÁÔØ ÐÁÒÏÌÉ MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "åÓÌÉ × ×ÁÛÅÊ ÓÅÔÉ ÉÓÐÏÌØÚÕÅÔÓÑ NIS, ×ÙÂÅÒÉÔÅ \"éÓÐÏÌØÚÏ×ÁÔØ NIS\". åÓÌÉ \n"
-#~ "ÎÅ ÚÎÁÅÔÅ, ÓÐÒÏÓÉÔÅ ÁÄÍÉÎÉÓÔÒÁÔÏÒÁ ÓÅÔÉ."
-
-#~ msgid "yellow pages"
-#~ msgstr "ÖÅÌÔÙÅ ÓÔÒÁÎÉÃÙ"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "îÁÓÔÒÏÊËÁ ÌÏËÁÌØÎÏÊ ÓÅÔÉ"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "áÄÒÅÓ ÐÅÒ×ÏÇÏ DNS ÓÅÒ×ÅÒÁ ÐÒÏ×ÁÊÄÅÒÁ"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "áÄÒÅÓ ×ÔÏÒÏÇÏ DNS ÓÅÒ×ÅÒÁ ÐÒÏ×ÁÊÄÅÒÁ"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "ëÁË ×Ù ÈÏÔÉÔÅ ÐÏÄÓÏÅÄÉÎÉÔØÓÑ Ë éÎÔÅÒÎÅÔ?"
diff --git a/perl-install/share/po/sk.po b/perl-install/share/po/sk.po
deleted file mode 100644
index 6e46f7e79..000000000
--- a/perl-install/share/po/sk.po
+++ /dev/null
@@ -1,8516 +0,0 @@
-# Translatrion file of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# Jan Matis <damned@hq.alert.sk>, 2000
-# Pavol Cvengros <orpheus@hq.alert.sk>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-08-27 18:02+0100\n"
-"Last-Translator: Jan Matis <damned@hq.alert.sk>\n"
-"Language-Team: sk <i18n@hq.alert.sk>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Nastavi» v¹etky hlavy osobitne"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Pou¾i» Xinerama roz¹írenie"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Nastavi» iba kartu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Nastavenie \"viac-hláv\""
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Vá¹ systém podporuje nastevenie pre \"viac hláv\".\n"
-"Èo chcete spravi»?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Grafická karta"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Zvoµte grafickú kartu"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Zvoµte X server"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree86 %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Akú konfiguráciu XFree chcete ma»?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹a karta má podporu hardwarovej 3D akcelerácie ale iba v XFree %s.\n"
-"Va¹a karta je podporovaná XFree %s, ktoré majú lep¹iu podporuj v 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Va¹a karta má podporu hardwarovej 3D akcelerácie v XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s s 3D hardwerovou akceleráciou"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Va¹a karta má podporu hardwarovej 3D akcelerácie ale iba v XFree %s.\n"
-"POZOR, TÁTO PODPORA JE IBA EXPERIMENTÁLNA A MO®E SPOSOBI« ZAMRZNUTIE "
-"POÈÍTAÈA."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s s EXPERIMENTÁLNOU 3D akceleráciou"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹a karta má podporu hardwarovej 3D akcelerácie ale iba v XFree %s.\n"
-"POZOR, TÁTO PODPORA JE IBA EXPERIMENTÁLNA A MO®E SPOSOBI« ZAMRZNUTIE "
-"POÈÍTAÈA.\n"
-"Va¹a karta je podporovaná XFree %s, ktoré majú lep¹iu podporuj v 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (ovládaè obrazovky pre in¹taláciu)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree konfigurácia"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Zvoµte veµkos» grafickej pamäti"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Zvoµte parametre servra"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Zvoµte monitor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva kritické parametre sú vertikálna frekvencia (frekvencia, ktorou je "
-"obnovovaná celá obrazovka) a horizontálna frekvencia (frekvencia, ktorou sú "
-"zobrazované jednotlivé riadky).\n"
-"Je veµmi dôle¾ité, aby ste nenastavili frekvencie, ktoré prevy¹ujú "
-"schopnosti vá¹ho monitora. Mohol by sa po¹kodi».\n"
-"Ak ste si nie celkom istý, zvoµte rad¹ej slab¹ie nastavenie."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Horizontálna frekvencia"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Vertikálna frekvencia"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Nie je nastavený monitor"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Nie je nastavená grafická karta"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Nie sú nastavené grafické rozlí¹enia"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Otestova» konfiguráciu?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Varovanie: Testovanie tejto grafickej karty mô¾e spôsobi» zamrznutie systému"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Test konfigurácie"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"skúste zmeni» niektoré parametre"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Vyskytla sa chyba"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Návrat za %d sekúnd"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Je toto správne nastavenie?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Vyskytla sa chyba, skúste zmeni» niektoré parametre"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Rozlí¹enie"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Zvoµte rozlí¹enie a farebnú håbku"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafická karta: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Expertný mód"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Zobraz v¹etko"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Rozlí¹enia"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Nastavenie klávesnice: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Typ my¹i: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Port my¹i: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Horizontálna frekvencia monitoru: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Vertikálna frekvencia monitoru: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafická karta: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafická karta: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafická pamä»: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Farebná håbka: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rozlí¹enie: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ovládaè: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Pripravujem konfiguráciu X-Windows"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Èo chcete robi»?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Zmeò monitor"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Zmeò grafickú kartu"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Zmeò parametre servra"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Zmeò rozlí¹enie"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Zobraz informácie"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Skús znova"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Koniec"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Zachova» zmeny?\n"
-"Aktuálna konfigurácia je:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Prosím, prihláste sa znova do %s aby ste aktivovali zmeny"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Prosím, odhláste sa a potom stlaète Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X pri ¹tarte"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Mô¾em nastavi» vá¹ poèítaè aby po re¹tarte automaticky spú¹»al X.\n"
-"Chcete ma» spustené X-Windows po re¹tarte poèítaèa?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 farieb (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tisíc farieb (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tisíc farieb (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miliónov farieb (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardy farieb (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB a viac"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "©tandardná VGA, 640×480 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800×600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibilná, 1024×768 @ 87 Hz prekladane (nie je 800×600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024×768 @ 87 Hz prekladane, 800×600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Roz¹írená Super VGA, 800×600 @ 60 Hz, 640×480 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Neprekladaná SVGA, 1024×768 @ 60 Hz, 800×600 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Vysoko frekvenèná SVGA, 1024×768 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Monitor, ktorý doká¾e 1280×1024 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Monitor, ktorý doká¾e 1280×1024 @ 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Monitor, ktorý doká¾e 1280×1024 @ 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor, ktorý doká¾e 1600×1200 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor, ktorý doká¾e 1600×1200 @ 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Prvý sektor zavádzacieho oddielu"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Prvý sektor disku (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "In¹talácia SILO"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Kam si ¾eláte nain¹talova» zavádzaè?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "In¹talácia lilo/grub"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO s textovym menu"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO s grafickým menu"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "©tart z DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Hlavné parametre zavádzaèa"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Pou¾i» zavádzaè"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "In¹talácia zavádzaèa"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Boot zariadenie"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nepracuje správne so star¹ími BIOSmi)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Kompaktná"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "kompaktná"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Video mód"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Pauza pred ¹tartom predvoleného jadra"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Heslo"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Heslo (znovu)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Obmedz voµby príkazového riadku"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "obmedz"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Vyèisti» /tmp pri ka¾dom ¹tarte"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Presná veµkos» pamäti (na¹iel som %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Dovoli» multi profily"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Zadajte veµkos» pamäti v Mb"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Parameter ``Restrict command line options'' je bez pou¾itia hesla vypnutý"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Prosím skúste znovu"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Heslo nesúhlasí"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Inicializaèná správa"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Oneskorenie pre ¹tart kernelu"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Povoli» ¹tart z CD?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Povoli» ¹tart z OF?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Predvolený OS?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Momentálne sa tu nachádzajú tieto záznamy.\n"
-"Mô¾ete pridáva» ïal¹ie, alebo meni» existujúce."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Prida»"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Hotovo"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Modifikova»"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Aký typ záznamu chcete prida»"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Iný OS (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Iný OS (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Iný OS (windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Obraz"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Pridaj"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Èítanie/Zápis"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tabuµka"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Nie celkom bezpeèný"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Záznam"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Predvoµba"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-veµkos»"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "Bez videa"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Odstráò záznam"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Prázdny záznam nie je dovolený"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Tento záznam je u¾ pou¾itý"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Na¹iel som %s %s rozhranie"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Máte e¹te nejaké ïal¹ie?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Máte nejaké %s rozhranie?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Nie"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Áno"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Prezrite si informácie o technických prostriedkoch"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "In¹talujem ovládaè pre %s kartu %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Ktorý %s ovládaè mám skúsi»?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Ovládaè %s niekedy potrebuje pre správnu èinnos» doplnkovú informáciu, aj\n"
-"keï zvyèajne pracuje správne aj bez nej. ®eláte si zada» doplnkové voµby,\n"
-"alebo dovolíte ovládaèu otestova» vá¹ poèítaè a údaje si zisti»? Obèas sa\n"
-"stane, ¾e toto testovanie poèítaè zablokuje, ale nemalo by spôsobi» ¾iadnu "
-"¹kodu."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Automatické zistenie"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Zadajte voµby"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Teraz mô¾ete zada» parametre pre modul %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Teraz mô¾ete zada» parametre pre modul %s.\n"
-"Parametre sú vo formáte ``meno=hodnota meno2=hodnota2 ...''.\n"
-"Napríklad: ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Parametre modulu:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Nahrávanie modulu %s zlyhalo.\n"
-"Chcete sa o to pokúsi» znova s inými parametrami?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(u¾ pridaný %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Toto heslo je príli¹ jednoduché"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Prosím zadajte u¾ívateµské meno"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "U¾ívateµské meno mô¾e obsahova» len malé písmená, èíslice, `-' a `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Takýto u¾ívateµ je u¾ pridaný"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Pridaj u¾ívateµa"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Zadajte u¾ívateµa\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Akceptuj u¾ívateµa"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Reálne meno"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "U¾ívateµské meno"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Mô¾em nastavi» vá¹ poèítaè aby po re¹tarte automaticky spú¹»al X.\n"
-"Chcete ma» spustené X-Windows po re¹tarte poèítaèa?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Zvoµte predvoleného u¾ivateµa:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Vyberte si window mana¾éra:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Prosím, zvoµte jazyk."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "Mô¾ete zvoli» ïal¹ie jazyky pou¾iteµné po in¹talácii"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "V¹etko"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Vitajte v zavadzaci operacneho systemu %s!\n"
-"\n"
-"Vyberte si operacy system ktory chcete spusti, alebo \n"
-"cakajte %d sekund pre predvolenu akciu.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Vitajte v zavadzaci operacneho systemu GRUB"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Pouzite klavesy %c a %c pre oznacenie zaznamu zviraznenim"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Stlacte enter pre zavedenie oznaceneho OS, 'e' pre upravu"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "prikazov pred zavedenim, alebo 'c' pre prikazovy riadok"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Oznaceny OS bude zavedeny za %d sekund."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "nie je dos» miesta v /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "©tart menu"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Kam si ¾eláte nain¹talova» zavádzaè?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pomoc zatiaµ nebola implementovaná.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfigurácia ¹týlu ¹tartovania"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Súbory"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Súbor/_Koniec"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>K"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Nový ¹týl kategórii monitorov"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Nový ¹týl monitora"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "©tandardný monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "©tandardný Gtk+ monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Spusti» Auroru pri ¹tarte"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Lilo/Grub mód"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Momentálne pou¾ívate %s ako ¹tartovací mana¾ér.\n"
-"Kliknite na Konfigurácia pre spustenie sprievodcu nastavením."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Konfigurácia"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Mód ¹tartu"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Mód systému"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Spusti» X-Window systém pri ¹tarte"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Nie, nechcem automatické prihlásenie"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Áno, chcem automatické prihlásenie s (u¾ivateµ, desktop)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Zru¹"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "nemô¾em otvori» /etc/inittab na èítanie: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "In¹talácia LILA zlyhala. Vyskytla sa nasledujúca chyba:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minút"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minúta"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekúnd"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Prosím, najprv si za zálohujte va¹e dáta"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Èítajte pozorne!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ak plánujete pou¾i» ABOOT, nechajte prosím na zaèiatku disku dos» voµného "
-"miesta.\n"
-"(2048 sektorov bude staèi»)"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Chyba"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Sprievodca"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Nový"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "Vzdialená"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Bod pripojenia"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Parametre"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Typ"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Odpoj"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Pripoj"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Zvoµ akciu"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Máte jeden veµký FAT diskový oddiel\n"
-"(pou¾ívaný MS DOSom alebo WINDOWS).\n"
-"Navrhujem zmeni» jeho veµkos»\n"
-"(kliknite naò, potom kliknite na \"Zmeò veµkos»\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Prosím kliknite na oddiel"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Prosím kliknite na oddiel"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Prosím kliknite na oddiel"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Detaily"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "pripojenie zlyhalo "
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Prázdna"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Iná"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Typ súborového systému:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Vytvor"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Namiesto toho pou¾ite `%s''"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Zru¹"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Najprv spravte `Unmount''"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Po zmene diskovej oblasti %s budú v¹etky dáta na tejto oblasti nenávratne "
-"stratené"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kam si ¾eláte pripoji» zariadenie %s?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "Parametre pripojenia"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "Rozdielne"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "Vymeniteµné médium"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "Zmeòte typ"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Aký typ súborového systému chcete??"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "Hµadám mo¾né nfs zdroje"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "Hµadám mo¾né nfs zdroje na serveri %s"
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Server"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "Hµadám mo¾né samba zdroje"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "Hµadám mo¾né samba zdroje na serveri %s"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "Zvoµte oddiel"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Zvoµte iný oddiel"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Koniec"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Prepni do expert módu"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Prepni do normálneho módu"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Spä»"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Pokraèova»?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Koniec bez ulo¾enia"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Koniec bez zmeny partition tabuµky?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "®eláte si ulo¾i» zmeny do /etc/fstab"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Automaticky prerozdeµ"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Zma¾ v¹etko"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Viac"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "Informácie o pevnom disku"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Nedostatok miesta pre automatickú alokáciu"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "V¹etky primárne oddiely sú u¾ pou¾ité"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Nemô¾em prida» ïal¹í oddiel"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Ak chcete ma» viac diskových oddielov, tak zma¾te jeden z nich, aby sa dal "
-"vytvori» roz¹írený oddiel disku"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Zvoµte typ oddielu"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Pokú¹am sa obnovi» partition tabuµku"
-
-#: ../../diskdrake_interactive.pm_.c:287
-#, fuzzy
-msgid "Rescue partition table"
-msgstr "Pokú¹am sa obnovi» partition tabuµku"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Zvoµte typ oddielu"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Vymeniteµné médium"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Vyber súbor"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Zálo¾ná tabuµka rozdelenia disku nemá rovnakú veµkos»\n"
-"Naozaj pokraèova»?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Varovanie"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Vlo¾te disketu do mechaniky\n"
-"V¹etky dáta na tejto diskete budú nenávratne stratené"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Pokú¹am sa obnovi» partition tabuµku"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "Detailné informácie"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Zmeò veµkos»"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Presuò"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formát"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Aktívny"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Pridaj do RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Pridaj do LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Odober z RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Odober z LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Modifikuj RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Pou¾i loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Vytvor nový oddiel"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Poèiatoèný sektor:"
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Veµkos» v MB: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Typ súborového systému: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Bod pripojenia: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Preferencia: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formátuje sa loopback súbor %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Zvoµte typ oddielu"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "Prepínam z ext2 na ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kam si ¾eláte pripoji» loopback súbor %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nemô¾em odpoji» oddiel kým je pou¾ívaný nejakou spätnou sluèkou.\n"
-"Odstráòte najskôr spätnú sluèku"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Poèítam hranice FAT súborového systému"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Mením veµkos»"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Tomuto oddielu sa nedá meni» veµkos»?"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "V¹etky dáta na tejto oblasti by sa mali zazálohova»"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Po zmene veµkosti oddielu %s budú v¹etky dáta nenávratne stratené"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Zvolte novú veµkos»"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "Nová veµkos» v MB: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Ktorý disk si ¾eláte posunú»?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Ktorý sektor si ¾eláte posunú»?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Presúvam"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Presúvam oddiel..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Vyberte existujúci RAID pre pridanie"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "nový"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Vyberte existujúci LVM pre pridanie"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "LVM meno?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Tento oddiel nemô¾e by» pou¾itý pre spätnú sluèku"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Spätná sluèka"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Meno súboru spätnej sluèky: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Reálne meno"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Súbor je u¾ pou¾ívaný inou spätnou sluèkou, skúste iný súbor"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Súbor existuje. Pou¾i»?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "zariadenie"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "úroveò"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "veµkos»"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Buïte opatrní: táto operácia je nebezpeèná."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Aký typ rozdelenia oddielov?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Prepáète, ale nemô¾em akceptova» vytvorenie /boot tak ïaleko na disku (na "
-"valci > 1024).\n"
-")Pou¾ívate LILO a tým pádom to nebude pracova», alebo ho nepou¾ívate a tým "
-"pádom nepotrebujete /boot"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Oddiel, ktorý chcete prida» ako root (/) sa na disku fyzicky nachádza a¾ za "
-"valcom 1024, a nemáte zadefinovaný oddiel /boot. \n"
-"Ak plánujete pou¾i» LILO, prosím pridajte najprv oddiel /boot"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Nastavili ste softvérový RAID oddiel ako koreòový (/).\n"
-"®iaden zavádzaè systému nedoká¾e zavies» systém bez /boot oddielu.\n"
-"Preto dbajte na pridanie /boot oddielu"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partition tabuµka zariadenia %s sa zapí¹e na disk!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Aby sa úpravy prejavili, musíte re¹tartova» poèítaè"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Ak naformátujete oddiel %s,v¹etky predo¹lé dáta sa na òom stratia"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Formátuje sa"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formátuje sa loopback súbor %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formátuje sa oddiel %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid zlyhal"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Nedostatok voµného miesta pre vytvorenie nového oddielu"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Nedostatok voµného miesta pre vytvorenie nového oddielu"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Odstraòujem LPD..."
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Zariadenie:"
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Oznaèenie v DOSe: %s (asi)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Typ: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Meno: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Zaèiatok: sektor %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Veµkos»: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorov"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Od cylindra %d po cylinder %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Naformátované\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Nenaformátované\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Pripojené\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback súbor(y): %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Predvolený oddiel pre ¹tart\n"
-"    (MS-DOS boot, nie pre lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Hladina %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Veµkos» kúsku %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-disky %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Meno loopback súboru: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Mo¾nosti sú, tento oddiel je\n"
-"ovládaci oddiel, mali by ste\n"
-"ho nechca» samotný.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Tento ¹pecialny Bootstrap\n"
-"oddiel je pre\n"
-"duálne ¹tartovanie systému.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Veµkos»: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cylindrov, %s hlavièiek, %s sektorov\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Info:"
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-disky %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Typ partition tabuµky: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na zbernici %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Mo¾nosti: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formátovanie %s zlyhalo"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nedoká¾em formátova» %s na typ %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "pripojenie zlyhalo "
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck zlyhalo s exit kódom %d alebo signálom %d"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "nepodarilo sa pripoji»: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "chyba odpojenia %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jednoduché"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Na oddiely men¹ie ako 16MB nemô¾ete pou¾i» JFS"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Na oddiely men¹ie ako 32MB nemô¾ete pou¾i» ReiserFS"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Body pripojenia musia zaèína» /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Oddiel s bodom pripojenia %s u¾ existuje\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Nemô¾ete pou¾i» logický zväzok LVM pre bod pripojenia %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Tento adresár by mal osta» na rootovskom súborovom systéme"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Pre tento bod pripojenia potrebujete ozajstný súborový systém(ext2, "
-"reiserfs)\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Chyba otvárania %s pre zápis: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Vyskytla sa chyba - neboli nájdené ¾iadne platné zariadenia, na ktorých je "
-"mo¾né vytvori» nové súborové systémy. Skontrolujte vá¹ hardvér pre zistenie "
-"príèiny problému."
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Nemáte ¾iadny oddiel disku!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Teraz by ste mali zvoli» slu¾by, ktoré chcete spú¹»a» pri ¹tarte.\n"
-"\n"
-"\n"
-"Ak plánujete pou¾íva» tento poèítaè ako server prístupný z internetu, mali "
-"by ste\n"
-"povoli» iba slu¾by ktoré naozaj potrebujete. "
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-#, fuzzy
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Teraz mô¾ete zvoli», kam si ¾eláte in¹talova» Linux Mandrake.\n"
-"Ak je pevný disk prázdny, alebo ak iný operaèný systém zaberá\n"
-"v¹etok pou¾iteµný priestor, treba disk rozdeli».\n"
-"\n"
-"\n"
-"Preto¾e je efekt rozdelovacieho procesu nenávratný, prerozdelenie\n"
-"disku mô¾e byt pre neskúsených u¾ívateµov stresujúce. Tento nástroj\n"
-"rozdeµovanie disku zjednodu¹uje.\n"
-"\n"
-"\n"
-"Potrebujete minimálne dva oddiely. Jeden pre operaèný systém a jeden\n"
-"pre virtuálnu pamä» (tie¾ nazývaný swap)."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Ka¾dý novo definovaný diskový oddiel musí by» naformátovaný.\n"
-"Formátovanie znamená vytváranie súborového systému.\n"
-"\n"
-"\n"
-"Teraz mô¾ete zvoli», èi si ¾eláte formátova» existujúce oddiely aby ste "
-"odstránili\n"
-"dáta, ktoré sa na nich nachádzajú. Ak si to ¾eláte, zvoµte prosím oddiely, "
-"ktoré\n"
-"si ¾eláte formátova».\n"
-"\n"
-"\n"
-"Nieje nutné opätovne formátova» v¹etky existujúce oddiely. Urèite musíte\n"
-"formátova» oddiely obsahujúce operaèný systém (napríklad  \"/\", \"/usr\",\n"
-"alebo \"/var\"  ). Nemusíte v¹ak formátova» oddiely obsahujúce dáta, ktoré\n"
-"chcete zachova» (typicky \"/home\")\n"
-"\n"
-"\n"
-"Pri voµbe oddielov na formátovanie buïte opatrný. V¹etky dáta na "
-"formátovanom\n"
-"oddiely budú nenávratne stratené.\n"
-"\n"
-"\n"
-"Kliknite na \"OK\" ak ste pripravený formátova» vybrané oddiely. \n"
-"\n"
-"\n"
-"Kliknite na \"Zru¹\" ak chcete zvoli» iné oddiely pre in¹taláciu."
-
-#: ../../help.pm_.c:376
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Vá¹ nový Mandrake Linux operaèný systém sa teraz in¹taluje.\n"
-"Táto operácia mô¾e trva» niekoµko minút v závislosti na mno¾stve balíèkov\n"
-"ktoré ste zvolili.\n"
-"\n"
-"Prosím buïte trpezlivý."
-
-#: ../../help.pm_.c:384
-#, fuzzy
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"Pred tým, ne¾ budete pokraèova», mali by ste si pozorne preèíta» podmienky\n"
-"licencie. Pokrývajú celú distribúciu Linux Mandrake a ak nesúhlasíte so "
-"v¹etkými\n"
-"kliknite na tlaèitlo Refuse. To okam¾ite ukonèí in¹taláciu. Pre "
-"pokraèovanie \n"
-"v in¹talácii stlaète tlaèidlo Accept."
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Prosím zvoµte  \"Install\" ak nemáte nain¹talovanú predo¹lú verziu Mandrake "
-"Linux-u\n"
-"alebo ak chcete pou¾íva» viac operaèných systémov.\n"
-"\n"
-"\n"
-"Prosím zvoµte  \"Update\" ak si ¾eláte obnovi» u¾ nain¹talovanú star¹iu "
-"verziu Mandrake Linux-u.\n"
-"\n"
-"\n"
-"V závislosti od va¹ich skúseností s GNU/Linux-om mô¾ete zvolit jednu z  "
-"nasledujúcich úrovní in¹talácie\n"
-"\n"
-"* Recommended: Ak ste e¹te nikdy nein¹talovali GNU/Linux, zvoµte túto "
-"mo¾nos». In¹talácia bude\n"
-" veµmi jednoduchá a budete musie» odpoveda» len na niekoµko otázok.\n"
-"\n"
-"\n"
-"* Customized: ak ste sa u¾ s GNU/Linux-om stretli, mô¾ete si zvoli» základné "
-"pou¾itie vá¹ho poèítaèa \n"
-" (pracovná stanica, server, vývojová stanica). Budete tie¾ musie» odpoveda» "
-"na viac otázok ako pri \n"
-" Recomended úrovni in¹talácie.\n"
-"\n"
-"\n"
-"* Expert: Ak máte naozaj dostatoèné skúsenosti s GNU/Linux-om, mô¾ete zvoli» "
-"túto triedu in¹talácie.\n"
-" Tak ako v Customized si budete môc» zvoli» základné pou¾itie vá¹ho poèítaèa "
-"(pracovná stanica, server,\n"
-" vývojová stanica). Budete ma» mo¾nos» ovplyvni» mnoho detailov in¹talácie "
-"ale mô¾e sa Vám sta», ¾e \n"
-" nebudete vedie» odpoveda» na niektoré otázky. Preto nepou¾ívajte túto "
-"úroveò in¹talácie pokiaµ sa v \n"
-" GNU/Linux-e naozaj nevyznáte."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX sa pokúsi vyhµada» PCI SCSI radièe. Ak DrakX nájde SCSI\n"
-"adaptér a rozpozná aký ovládaè pou¾i», bude automaticky nain¹talovaný.\n"
-"\n"
-"\n"
-"Ak nemáte SCSI radiè, alebo máte (ISA, PCI) SCSI adaptér, ktorý DrakX\n"
-"nerozoznal. Budete musie» odpoveda» èi máte SCSI radiè. V prípade, ¾e\n"
-"zvolíte Áno, zobrazí sa zoznam ovládaèov z ktorých si budete môc» \n"
-"vybra» vhodný pre vá¹ SCSI radiè.\n"
-"\n"
-"\n"
-"V prípade, ¾e budete sami vybera» vhodný ovládaè, DrakX vám dá mo¾nos»\n"
-"¹pecifikova» jeho parametre. Taktie¾ budete musie» dovoli» test hardvéru\n"
-"na funkènos» ovládaèa a jeho parametrov."
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Zvolili ste nasledujúce slu¾by: %s\n"
-"\n"
-"\n"
-"Tieto slu¾by sa spú¹»ajú implicitne. Momentálne nemajú ¾iadne známe "
-"bezpeènostné\n"
-"chyby, ale v budúcnosti nejaké mô¾u by» nájdené. V tom prípade musíte prejs» "
-"na\n"
-"vy¹¹iu verziu èo najskôr.\n"
-"\n"
-"\n"
-"Naozaj si ¾eláte in¹talova» tieto slu¾by?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Nemô¾em pou¾i» broadcast bez NIS domény"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Vlo¾te disketu s FAT formátom do mechaniky %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Táto disketa nemá FAT format"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Pre pou¾itie tohto ulo¾eného výberu balíèkov, na¹tartujte in¹taláciu s "
-"``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "chyba pri èítaní zo súboru %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Nejaky hardware vo va¹om poèítaèi potrebuje ``proprietarne'' ovládaèe.\n"
-"Informácie mô¾ete nájs» na: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Musíte ma» koreòový oddiel.\n"
-"Vytvorte oddiel (alebo kliknite na existujúcu).\n"
-"Potom zvoµte akciu ``Bod pripojenia`` a nastavte na `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Musíte nastavi» swap oddiel"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nevytvorili ste swap oddiel\n"
-"\n"
-"Napriek tomu pokraèova»?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Musíte ma» FAT oddiel pripojený na /boot/efi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Pou¾i voµné miesto"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nedostatok voµného miesta pre vytvorenie nového oddielu"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Pou¾i existujúci oddiel"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Tu nieje ¾iadny pou¾iteµný oddiel"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Pou¾i oddiel s Windows pre loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Ktorý oddiel chcete pou¾i» pre Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Zvoµte veµkosti"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Veµkos» koreòového oddielu v MB: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Veµkos» oddielu v MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Pou¾i voµné miesto na Windows oddiele"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Ktorému oddielu chcete zmeni» veµkos»?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Poèítam hranice súborového systému pre Windows"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Meniè veµkosti FAT nebol schopny pracova» s oddielom, \n"
-"nastala chyba: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Va¹ oddiel s Windows je veµmi fragmentovaný, prosím spustite najprv  "
-"``defrag''"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"POZOR!\n"
-"\n"
-"DrakX teraz ide zmeni» veµkos» vá¹ho Windows oddielu. Táto operácia je\n"
-"nebezpeèná. Bolo by vhodné aby ste najskôr spustili pod Windows scandisk\n"
-"a defrag. Ak ste to e¹te neurobili, ukonèite in¹taláciu a urobte to teraz.\n"
-"Bolo by tie¾ vhodné zazálohova» va¹e dáta. Ak viete èo robíte, stlaète Ok."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Koµko chcete necha» pre windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "oddiel %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Neúspe¹ná zmena veµkosti FAT: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nieje tu oddiel FAT, ktorému by sa dala zmeni» veµkos» alebo pou¾i» ho pre "
-"loopback (alebo tam nieje dostatok voµného miesta)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Vyma¾ celý disk"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Odstráni» Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Máte viac ako jeden disk, na ktorý chcete in¹talova» linux ?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "V¹etky oddiely a dáta na nich budu stratené na disku %s"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Vlastné rozdelenie disku"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Pou¾i» fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Teraz mô¾ete rozdeli» vá¹ pevný disk %s.\n"
-"Keï skonèíte, nezabudnite ulo¾i» zmeny pomocou `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nemáte dostatok voµného miesta na oddiele s Windows"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Nemô¾em nájs» miesto pre in¹taláciu"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX sprievodca rozdelením disku na¹iel tieto rie¹enia:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Neúspe¹ne rozdeµovanie: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Spú¹»am prácu so sie»ou"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Ukonèujem prácu so sie»ou"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Vyskytla sa chyba a neviem ju úplne vyrie¹i».\n"
-"Pokraèujte na vlastnú zodpovednos»."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dvojnásobný bod pripojenia %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Niektoré dôle¾ité balíky neboli správne nain¹talované.\n"
-"Je mo¾né, ¾e sú po¹kodené vá¹ CD disk alebo mechanika.\n"
-"Skontrolujte to napríklad pou¾itím \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Vitajte v %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Nie je dostupná ¾iadna floppy mechanika"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Spú¹»am krok %s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Zvoµte veµkos» ktorú chcete nain¹talova»"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Celková veµkos»: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Verzia: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Veµkos»: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Zvoµte balíky, ktoré chcete nain¹talova»"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Info"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "In¹talácia"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "In¹talujem"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Prosím èakajte, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Zvy¹ný èas "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Celkový èas "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Pripravujem in¹taláciu"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "In¹talujem balík %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Napriek tomu pokraèova»?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Chyba pri zoraïovaní zoznamu balíkov:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Pou¾i» existujúcu konfiguráciu X11?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Vá¹ systém má nedostatok prostriedkov. Mo¾no budete ma» problémy s\n"
-"in¹taláciou Mandrake Linux. Ak sa tak stane, skúste textovú in¹taláciu. Pre "
-"jej\n"
-"spustenie stlaète `F1' po na¹tartovaní z CDROMky a zadajte `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Trieda in¹talácie"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Prosím, zvoµte jednu z nasledujúcich tried in¹talácie:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Celková veµkos» skupín, ktoré ste oznaèili je pribli¾ne %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ak si ¾eláte in¹talova» menej ako je dané èíslo,\n"
-"zvoµte toµko percent balíkov, koµko uznáte za vhodné.\n"
-"\n"
-"Pri malých percentách sa budú in¹talova» iba naozaj dôle¾ité balíky\n"
-"a ak zvolíte 100%% nain¹taluje sa v¹etko."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Na disku máte priestor iba pre %d%% z oznaèených balíkov.\n"
-"\n"
-"Ak si ¾eláte nain¹talova» menej,\n"
-"zvoµte toµko percent balíkov, koµko uznáte za vhodné.\n"
-"Pri malých percentách sa budú in¹talova» iba naozaj dôle¾ité balíky\n"
-"Ak necháte  %d%% nain¹taluje sa toµko balíkov, koµko bude mo¾né."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "V ïal¹om kroku budete ma» mo¾nos» nastavi» presnej¹ie"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Percentuálny poèet balíkov pre in¹taláciu"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Výber skupín balíkov"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Osobitná voµba balíkov"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Celková veµkos»: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Chybný balík"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Meno: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Dôle¾ité: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Nemô¾ete oznaèi» tento balík preto¾e na jeho in¹taláciu nie je dos» miesta."
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Budú nain¹talované nasledujúce balíky"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Nasledujúce balíky budú odstránené"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Mô¾ete oznaèi»/odznaèi» tento balík"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Toto je jeden zo základných balíkov, nemô¾e by» odznaèený"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Nemô¾ete odznaèi» tento balík. Je u¾ nain¹talovaný"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Tento balík potrebuje nov¹iu verziu\n"
-"Ste si istý, ¾e ho chcete odznaèi»?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Nemô¾ete odznaèi» tento balík. Musíte prida» novú verziu"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Zobraz automaticky zvolené balíèky"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Nahra»/Ulo¾i» na disketu"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "Aktualizácia voµby balíèkov"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "Minimálna in¹talácia"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Odhadujem"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Prosím èakajte, pripravujem in¹taláciu"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d balíky"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Akceptuj"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Odmietni"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Zmeòte vá¹ CD-ROM disk!\n"
-"\n"
-"Prosím, vlo¾te CD-ROM nazvané \"%s\" do va¹ej mechaniky a zvoµte OK.\n"
-"Ak taký CD disk nemáte, zvoµte Zru¹ pre zru¹enie in¹talácie z tohoto disku."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Poèas in¹talácie balíkov sa vyskytla chyba:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Vyskytla sa chyba"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Súhlas s licenciou"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klávesnica"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Prosím, zvoµte vá¹ typ klávesnice"
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Tu je zoznam dostupných klávesnic"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Akú in¹talaènú triedu chcete pou¾i»?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "In¹talácia/Aktualizácia"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Toto je in¹talácia alebo aktualizácia?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Odporúèane"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Aktualizácia"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Prosím, zvoµte typ va¹ej my¹i."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Port my¹i"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Prosím zvoµte, ktorému sériovému portu je va¹a my¹ pripojená."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Emulácia tlaèidiel"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Emulácia druhého tlaèidla"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Emulácia tretieho tlaèidla"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurujem PCMCIA karty..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Konfigurujem IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "nie sú dostupné ¾iadne oddiely"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Prehµadávam oddiely na body pripojenia"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Zvoµte body pripojenia"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Nemô¾em preèíta» tabuµku rozdelenia disku, je príli¹ po¹kodená :(\n"
-"Mô¾em sa pokúsi» vyèisti» po¹kodené oddiely (V©ETKY ÚDAJE budu stratené!).\n"
-"Druhou mo¾nos»ou je zakáza» DrakXu modifikova» tabuµku rozdelenia.\n"
-"(chyba %s)\n"
-"\n"
-"Povolite strátu oddielu?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake nedokázal korektne naèíta» tabuµku rozdelenia disku.\n"
-"Pokraèujte na vlastné riziko!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "Nena¹iel som koreòový oddiel pre upgrade"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Koreòový oddiel"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Ktorý je koreòový oddiel va¹ej in¹talácie?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Aby sa prejavily úpravy partition tabuµky, musíte re¹tartova»"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Výber oddielov pre formátovanie"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Kontrola chybných blokov?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Formátuje sa"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Vytváram a formátujem súbor %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nedostatoène veµký swap pre dokonèenie in¹talácie, prosím zväè¹i»"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Hµadám dostupné balíky"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Hµadám balíky pre aktualizáciu"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "Vá¹ systém nemá dos» miesta pre in¹taláciu alebo upgrade (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Úplna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Odporuèené (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Vlastný výber"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Prosím zvoµte naèíta», alebo ulo¾i» výber balíèkov na disketu.\n"
-"Formát je taký istý ako diskety generované automatickou\n"
-"in¹taláciou."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Nahra» z diskety"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Nahrávam z diskety"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Výber balíèkov"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "Vlo¾te do mechaniky disketu s zoznamom balíèkov"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Ulo¾ na disketu"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Zvolená veµkos» je väè¹ia ako dostupné miesto"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ak máte v¹etky CD zo zoznamu, stlaète OK.\n"
-"Ak nemáte ¾iadne, stlaète Zru¹.\n"
-"Ak vám chýbajú iba niektoré, odznaète ich a potom stlaète OK."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom oznaèené \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"In¹talujem balík %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Poin¹talaèná konfigurácia"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Vlo¾te ¹tartovaciu disketu do mechaniky %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Vlo¾te Update Modules disketu do mechaniky %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Teraz máte mo¾nos» získa» balíky urèené na kryptovanie.\n"
-"\n"
-"Varovanie:\n"
-"\n"
-"Vïaka rozdielnemu prístupu zákona (v rôznych krajinách) k týmto balíkom,\n"
-"by ste sa mali dopredu uisti», èi vám pou¾ívanie takýchto balíkov zákon\n"
-"vo va¹ej krajine dovoµuje.\n"
-"\n"
-"V prípade, ¾e poru¹íte zákony va¹ej krajiny, mali by ste si by» vedomý,\n"
-"aký trest vám za to hrozí.\n"
-"\n"
-"Mandrakesoft (ani jeho zamestnanci, èi spolupracovníci) neruèí za akékoµvek\n"
-"¹kody spôsobené pou¾ívaním jeho softvéru.\n"
-"\n"
-"\n"
-"Ak máte ïal¹ie otázky súvisiace s týmto textom, obrá»te sa prosím na \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Vyberte miror, z ktorého chcete stiahnu» balík"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Pripájam sa k miroru a s»ahujem zoznam mo¾ných balíkov"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Prosím zvoµte balíky, ktoré chcete nain¹talova»."
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Ktoré je va¹e èasové pásmo?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "Hardvérove hodiny nastavené na GMT"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatická synchronizácia èasu (pomocou NTP)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "NTP server"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Vzdialený CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Bez tlaèiarne"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Zhrnutie"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "My¹"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Èasová zóna"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Tlaèiarne"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDN karta"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Zvuková karta"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV karta"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Lokálne súbory"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Nastavenie root hesla"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Bez hesla"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Toto heslo je príli¹ jednoduché(musí by» minimálne %d znakov dlhé)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Autentifikácia"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "Autentifikácia LDAP"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "LDAP server"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "NIS autentifikácia"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS doména"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS server"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Vlastná zavádzacia disketa poskytuje mo¾nos» zavies» vá¹ systém Linux\n"
-"bez závislosti na obvyklom zavádzaèi. Hodí sa to, pokiaµ nechcete na va¹om\n"
-"systéme in¹talova» SILO, iný operaèný systém SILO odstráni, alebo\n"
-"SILO nepracuje správne s va¹ím hardvérom. Individuálna zavádzacia disketa\n"
-"mô¾e by» tie¾ pou¾itá spolu s Mandrake Linux záchrannou disketou, èo \n"
-"podstatne uµahèí zotavenie sa z vá¾nych chýb systému.\n"
-"\n"
-"Ak si ¾eláte vytvori» zavádzaciu disketu pre vá¹ systém, vlo¾te disketu do\n"
-"prvej mechaniky a stlaète \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Prvá floppy mechanika"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Druhá floppy mechanika"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Vynechaj"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Individuálna zavádzacia disketa poskytuje mo¾nos» zavies» vá¹ systém Linux\n"
-"bez závislosti na obvyklom zavádzaèi. Hodí sa to, pokiaµ nechcete na va¹om\n"
-"systéme in¹talova» LILO (èi GRUB), iný operaèný systém LILO odstráni, alebo\n"
-"LILO nepracuje správne s va¹ím hardvérom. Individuálna zavádzacia disketa\n"
-"mô¾e by» tie¾ pou¾itá spolu s Mandrake Linux záchrannou disketou, èo \n"
-"podstatne uµahèí zotavenie sa z vá¾nych chýb systému.\n"
-"\n"
-"®eláte si vytvori» zavádzaciu disketu pre vá¹ systém?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Prepáète, nena¹iel som ¾iadnu disketovú mechaniku"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Zvoµte floppy mechaniku v ktorej chcete vytvori» boot disketu"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Vlo¾te disketu do mechaniky %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Vytváram bootdisk"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Pripravuje sa zavádzaè"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Chcete pou¾i» aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Chyba in¹talácie aboot.\n"
-"Skúsi» silovú in¹taláciu s mo¾nos»ou znièenia prvého oddielu?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "In¹talácia zavádzaèa"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "In¹talácia zavádzaèa zlýhala. Vyskytla sa nasledujúca chyba:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Slabá"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Stredná"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Vysoká"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Voµba bezpeènostnej úrovne"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Vlo¾te èistú disketu do mechaniky %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Pripravujem auto in¹talaènú disketu"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Niektoré kroky niesu dokonèené.\n"
-"\n"
-"Naozaj chcete teraz skonèi»?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratulujeme! In¹talácia je kompletná.\n"
-"Vyberte zavádzacie médium (disketa, CD) a staète enter\n"
-"pre re¹tart poèítaèa.\n"
-"Informácie o opravách tejto verzie Mandrake Linux-u mô¾ete nájst nahttp://"
-"www.mandrakelinux.com/."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Príprava auto in¹talaènej diskety"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Automatická in¹talácia mô¾e by» plne automatizovaná\n"
-"v tom prípade v¹ak in¹talácia zaberie celý pevný disk.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automatická"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Prehra»"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Ulo¾i» voµbu balíkov"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "In¹talácia Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> medzi polo¾kami  |  <Medzera> oznaèuje  |  <F12> ïalej"
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "chýba kdesu"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "Zvoµte súbor"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Roz¹írene"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Prosím èakajte"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Uká¾ strom"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Skri strom"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Priame, alebo skupinové triedenie"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Nejednoznaènos» (%s), buïte presnej¹í\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Chybná voµba, skúste znovu\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (predvolené %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Va¹a voµba? (predvolené %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Va¹a voµba? (predvolené %s vlo¾te `none' pre niè "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Èeská (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Nemecká"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "©panielska"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Fínska"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Francúzska"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Nórska"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Polská"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Ruská"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "©védska"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "UK klávesnica"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "US klávesnica"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Albánska"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Arménska (stará)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Arménska (písací stroj)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Arménska (fonetická)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbajd¾an (latin)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belgická"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulharská"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazílska"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Bieloruská"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "©vajèiarska (Nemecké rozlo¾enie kláves)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "©vajèiarska (Francúzske rozlo¾enie kláves)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Èeská (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Nemecká (bez màtvych kláves)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Dánska"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Nórska)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estónska"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzínska (\"Ruské\" rozlo¾enie kláves)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzínska (\"Latin\" rozlo¾enie kláves)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Grécka"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Maïarská"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Chorvátska"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Izraelská"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Izraelská (fonetická)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iránska"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islandská"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Talianska"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japonská 106 kláves"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Kórejska klávesnica"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latinsko Americká"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litovská AZERTY (stará)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litovská AZERTY (nová)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litovská QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litovská \"fonetická\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "Umiestnenie"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Macedónska"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Holandský"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Poµská (qwerty rozlo¾enie kláves)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Poµská (qwertz rozlo¾enie kláves)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugalská"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Kanadská (Quebec)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Románska (Yawerty)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Románska (Yawerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Ruská (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Slovinská"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovenská (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovenská (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "Srbská (cyrillic)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Thaiská klávesnica"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr "Tajik klávesnica"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turecká (tradièný \"F\" model)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turecká (moderný \"Q\" model)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukrainská"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "US klávesnica (medzinárodná)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamská \"numerická\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "Juhoslovanská (latin)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Kruhové pripojenia %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Odstraòte najprv logické zväzky\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun my¹"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "©tandardné"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "©tandardná PS2 my¹ s kolieskom"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 tlaèidlo"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "V¹eobecné"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Koliesko"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "sériová"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "¹tandardná my¹ s 2 tlaèidlami"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "©tandardná trojtlaèítková"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (sériová, starý typ C7)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "My¹ na zbernici"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 tlaèidlá"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 tlaèidlá"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "niè"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "®iadna my¹"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Prosím otestujte my¹."
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Pre aktiváciu my¹i,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "POHNITE KOLIESKOM!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Dokonèi»"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Ïal¹í ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Predchádzajúce"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Je to správne?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Pripojenie k internetu"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Najpou¾ivanej¹ie pripojenie s adsl je pppoe.\n"
-"Av¹ak existujú pripojenia ktoré pou¾ívaju pptp alebo dhcp.\n"
-"Ak neviete èo pou¾i», tak zvoµte 'pou¾i pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-#, fuzzy
-msgid "Alcatel speedtouch usb"
-msgstr "speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "pou¾i» dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pou¾i pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pou¾i pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Ktorý dhcp klient chcete pou¾i»?\n"
-"©tandardný je dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Vo va¹om systéme nebol nájdený sie»ovy ethernet adaptér.\n"
-"Nemô¾em nastavi» po¾adovaný typ pripojenia."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Zvoµte sie»ove rozhranie"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Prosím zvoµte si ktoré sie»ové zariadenie budete pou¾íva» na pripojenie k "
-"internetu"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nena¹iel som sie»ovú kartu"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Konfigurujem sie»"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Prosím zadajte meno vá¹ho poèítaèa ak ho viete.\n"
-"Niektoré DHCP servre ho vy¾adujú pre svoju funkènos».\n"
-"Meno vá¹ho poèítaèa by malo byt plne kvalifikované host name,\n"
-"ako napríklad ``hq.alert.sk''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Názov poèítaèa"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Sprievodca konfiguráciou siete"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Externý ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interná ISDN karta"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Aký typ ISDN pripojenia máte?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Ktorý typ nastavenia ISDN uprednotníte?\n"
-"\n"
-"* Starý typ pou¾íva isdn4net. Obsahuje silné nástroje, ale\n"
-"  »a¾ko sa nastavuje.\n"
-"\n"
-"* Nový typ je jednoduch¹ie pochopiteµný, ale obsahuje menej\n"
-"  nástrojov.\n"
-"\n"
-"Doporuèujeme pou¾i» nový typ nastavenia ISDN.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nová konfigurácia (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Stará konfigurácia (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "Konfigurácia ISDN"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Zvoµte si poskytovateµa.\n"
-"Ak nieje v zozname, zvoµte Unlisted"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "Európsky protokol"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "Európsky protokol (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "Protokol pre zvy¹ok sveta"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol pre zvy¹ok sveta \n"
-" bez D-Channel (prenajaté linky)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Aký typ protokolu chcete pou¾íva» ?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Aký typ karty máte?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Neviem"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Ak máte ISA kartu, tak hodnoty na ïal¹ej obrazovke by mali by» správne.\n"
-"\n"
-"Ak máte PCMCIA kartu, musíte vedie» irq a io adresu tejto karty.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Preru¹"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Pokraèova»"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Ktorá je va¹a ISDN karta ?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Na¹iel som PCI ISDN kartu, ale nepoznám tento typ. Prosím zvoµte si jednu z "
-"PCI kariet na ïal¹ej obrazovke."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Nebola nájdena ISDN karta. Prosím zvoµte si jednu zo zobrazených."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Prosím zvoµte na ktorý sériový port je pripojený vá¹ modem."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Voµby dialupu"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Meno pripojenia"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Telefónne èíslo"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Prihlasovacie ID"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Zalo¾ené na skriptoch"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Zalo¾ené na terminály"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Meno domény"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Prvý DNS server (nepovinné)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Druhý DNS server (nepovinné)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Mô¾ete va¹e pripojenie prekonfigurova» alebo sa odpoji»."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Mô¾ete prekonfigurova» va¹e pripojenie."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Momentálne ste pripojený k internetu."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Mô¾ete prekonfigurova» va¹e pripojenie, alebo sa pripojit k internetu."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Momentálne nieste pripojený k internetu."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Pripoji» k internetu"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Odpoji» od internetu"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Konfigurácia sie»ového pripojenia (LAN alebo internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Pripojenie a konfigurácia internetu"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Teraz nastavíme Va¹e pripojenie %s."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Teraz nastavíme pripojenie %s.\n"
-"\n"
-"Stlaète OK pre pokraèovanie."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Konfigurácia siete"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Preto¾e robíte in¹taláciu cez sie», va¹a sie» je u¾ nasavená. Stlaète OK pre "
-"zachovanie\n"
-"nastavenia, alebo Cancel pre opätovné nastavenie pripojenia na internet a "
-"sie».\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Vítajte v sprievodcovi nastavenia siete\n"
-"\n"
-"Chcete nastavi» va¹e pripojenie k sieti/internetu.\n"
-"Ak nechcete pou¾i» automatickú detekciu od¹krtnite políèko.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Zvoµte profil na konfiguráciu"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Pou¾i» auto-detekciu"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Zis»ujem zariadenia..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Normálne modémove pripojenie"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "detekovaný na porte %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN pripojenie"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "nájdene %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ADSL pripojenie"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "detekovaný na rozhraní %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Pripojenie káblom"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "detekované pripojenie káblom"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "Pripojenie LAN"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "nájdená ethernet karta(y)"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Vyberte pripojenie, ktoré chcete nastavi»"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Nastavili ste niekoµko mo¾ností pripojenia k internetu.\n"
-"Zvoµte jednu, ktorú chcete pou¾íva».\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Pripojenie k internetu"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Chcete sa pripoji» hneï pri ¹tarte?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Konfigurácia siete"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Nastal problém pri re¹tartovaní sie»e: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Gratulujeme. Nastavenie siete a pripojenia k internetu je dokonèené\n"
-"\n"
-"Nastavenie bude teraz aplikované na vá¹ systém.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Po zmene doporuèujeme re¹tartovat X windows, aby ste\n"
-"predi¹li problémom pri zmene hos»ovského mena."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"Varovanie: Toto zariadenie u¾ bolo  nastavené na prístup k internetu.\n"
-"Jednoducho nechajte pôvodné nastavenie.\n"
-"Modifikácia parametrov mô¾e zmeni» nastavenie."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Zadajte IP konfiguráciu tohoto poèítaèa.\n"
-"Ka¾dý záznam by mal by» zadaný ako IP adresa v dekadickom tvare\n"
-"oddelenom bodkami (napr. 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurácia sie»ového zariadenia %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (ovladaè %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP adresa"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Maska siete"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Automatická IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa musí by» vo formáte 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Prosím zadajte meno vá¹ho poèítaèa.\n"
-"Meno vá¹ho poèítaèa by malo byt plne kvalifikované host name,\n"
-"ako napríklad ``hq.alert.sk''.\n"
-"Tie¾ mô¾ete zada» IP adresu brány ak ju viete"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS server"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Brána"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Zariadenie smerujúce k bráne"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Nastavenie proxy"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Proxy má by» http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Proxy má by» ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Konfigurácia internetu"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Chcete sa skúsi» pripoji» teraz k internetu?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Testovanie pripojenia..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Systém je teraz pripojený k internetu."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Z bezpeènostných dôvodov bude teraz odpojený."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Systém prevdepodobne nieje pripojený k internetu.\n"
-"Skúste prekonfigurova» pripojenie."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Konfigurácia pripojenia"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Prosím vyplòte alebo za¹krtnite políèka"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ karty"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "DMA karty"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "IO karty"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "IO_0 karty"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "IO_1 karty"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Va¹e osobné telefónne èíslo"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Meno poskytovateµa (napr. provider.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Telefónne èíslo poskytovateµa"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 poskytovateµa (voliteµné)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 poskytovateµa (voliteµné)"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "Vyberte si va¹u krajinu"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Mód vytáèania"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Rýchlos» pripojenia"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "Timeout pripojenia (v sekundách)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Meno úètu (u¾ivateµské meno)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Heslo úètu"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Na tejto platforme njeje podporovaný roz¹írený oddiel"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"V tabuµke rozdelenia disku sa nachádza záznam o voµnom priestore,\n"
-"ktorý nedoká¾em vyu¾i». Jediné rie¹enie je presunú» primárny oddiel tak,\n"
-"aby sa voµné miesto nachádzalo za ním a bolo pou¾iteµné pre roz¹írený\n"
-"oddiel."
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Obnovenie zo súboru %s zlyhalo: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Chybný zálohovací súbor"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "chyba pri zápise do súboru %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Na va¹om disku sa deje nieèo nedobré.\n"
-"Zlyhal test integrity dát. Akýkoµvek zápis dát mo¾e skonèi»\n"
-"neúspechom a stratou dát."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "musí ma»"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "dôle¾ité"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "veµmi pekné"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "pekné"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "mo¾no"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Tlaè, neukladaj do fronty."
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "USB"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Lokálna tlaèiareò"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Vzdialená tlaèiareò"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "Tlaèiareò na vzdialenom CUPS serveri"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "Tlaèiareò na vzdialenom lpd serveri"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Sie»ová tlaèiareò (soket)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Tlaèiareò na vzdialenom SMB/Windows 95/98/NT serveri"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "Tlaèiareò na vzdialenom NetWare serveri"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "Vlo¾te URI zariadenia tlaèiarne"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "Presmeruj výstup do príkazu"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "Neznámy model"
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(nal %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "(na tomto stroji)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Zvoµte pripojenie tlaèiarne"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Ako je tlaèiareò pripojená?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"Tlaèiarne na vzdialenom CUPS serveri nemusíte konfigurova»\n"
-"lokálne; tlaèiarne budú automaticky detekované. Prosím\n"
-"zoµte \"Tlaèiareò na vzdiailenom CUPS serveri\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-#, fuzzy
-msgid "None"
-msgstr "Hotovo"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Zvoµte predvoleného u¾ivateµa:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Zatvori»"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "Aplikuj/Znovu naèítaj"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresa vyzerá napríklad takto: 192.168.1.4"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "Èislo portu má by» celé kladné èíslo!"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "Predvolená tlaèiareò"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "IP CUPS servera"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Automatické kroky konfigurácie"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Zis»ujem zariadenia..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Test portov"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Bola zistená tlaèiareò, model \"%s\" na "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Lokálne zariadenie tlaèiarne"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Ku ktorému zariadeniu je va¹a tlaèiareò pripojená?\n"
-"(/dev/lp0 zodpovedá LPT1)\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Zariadenie tlaèiarne"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "Chýba zariadenie alebo meno súboru."
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Naèítavam dáta tlaèiarne ..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Voµby vzdialenej lpd tlaèiarne"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Pre pou¾itie vzdialenej lpd tlaèovej fronty je potrebné \n"
-"zada» názov tlaèového servera a názov tlaèiarne na tomto\n"
-"serveri."
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "Názov vzdialeného poèítaèa"
-
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "Meno vzdialenej tlaèiarne"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "Chýba názov vzdialeného poèítaèa"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "Chýba názov vzdialenej tlaèiarne!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Voµby tlaèiarne SMB/Windows 9x/NT"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Pre tlaè na SMB tlaèiarne je potrebné zada» názov SMB servera (nebýva v¾dy\n"
-"zhodný s TCP/IP názvom poèítaèa) a prípadne IP adresu tlaèového servera, "
-"ako\n"
-"aj názov zdieµaného zariadenia pre tlaèiareò a vhodné meno pou¾ívateµa,\n"
-"heslo a pracovnú skupinu."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "Názov SMB servra"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "IP adresa SMB servra"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Názov zdieµaného zariadenia"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Pracovná skupina"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Musíte zada» meno, alebo IP adresu servera!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "Chýba meno samba zlo¾ky!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "Voµby tlaèiarne pre NetWare"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Pre tlaè na NetWare tlaèiareò je potrebné zada» názov NetWare tlaèového\n"
-"servera (nebýva v¾dy zhodný s TCP/IP názvom poèítaèa), ako aj názov fronty\n"
-"tlaèiarne, ku ktorej chcete pristupova» a vhodné meno pou¾ívateµa s heslom."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Tlaèový server"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Názov tlaèovej fronty"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "Chýba meno NCP servera!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "Chýba meno NCP fronty!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Nastavenia soketu tlaèiarne"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Pre tlaè na socket tlaèiarne musíte zada»\n"
-"meno hostiteµa tlaèiarne a prípadne èíslo portu.\n"
-"Na HP JetDirect serveroch je to väè¹inou 9100,\n"
-"inde to mô¾e by» odli¹né. Pozrite si manuál."
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "Hostiteµské meno tlaèiarne"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "Chýba hostiteµské meno tlaèiarne"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "URI tlaèiarne"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Pre prístup k tlaèiarni zadajte jej URI. URI musí spåòa» CUPS alebo Foomatic "
-"¹pecifikácie."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "Musíte zada» správne URI!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Ka¾dá tlaèiareò potrebuje meno (napríklad lp).\n"
-"Popis a Poloha nie je potrebné vyplòova». Sú \n"
-"iba komentármi pre u¾ívateµov."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Meno tlaèiarne"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Popis"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Umiestnenie"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Naèítavam dáta tlaèiarne ..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "Výber modelu tlaèiarne"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "Aký model tlaèiarne máte?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Zmena nastavenia tlaèiarne"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Konfigurácia internetu"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"Základné nastavenia tlaèiarne\n"
-"Uistite sa, ¾e veµkos» papiera a typ atramentu\n"
-"je nastavený správne. Práli¹ vysoká kvalita\n"
-"tlaèe spôsobuje spomalenie."
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Parameter %s musí by» celé èíslo!"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Parameter %s musí by» èíslo!"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Parameter %s je mimo rozsahu!"
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Naozaj chcete odstráni» tlaèiateò \"%s\"?"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "Testovacie stránky"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"Prosím zvoµte testovacie stránky, ktoré chcete vytlaèi»\n"
-"Tlaè testovacej stánky foto kvality mô¾e trva» tro¹ku dlh¹ie."
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "®iadne testovacie stránky"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "Tlaè"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "©tandardné testovacie stránky"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr "Alternatívna testovacia stránka (Letter)"
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr "Alternatívna testovacia stránka (A4)"
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "Fotografická testovacia stránka"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Prebieha tlaè testovacej stránky..."
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testovacia stránka bola zaslaná tlaèiarni.\n"
-"Kým zaène tlaèiareò tlaèi», mô¾e to chvíµku trva».\n"
-"Stav tlaèe:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testovacia stránka bola zaslaná tlaèiarni.\n"
-"Kým zaène tlaèiareò tlaèi», mô¾e to chvíµku trva».\n"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "Pracuje správne?"
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Bez tlaèiarne"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Ukonèujem prácu so sie»ou"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "Voµby tlaèiarne"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "Naèítavam dáta tlaèiarne ..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "Prenes nastavenie tlaèiarne"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-"CUPS nepodporuje tlaèiarne na Novell serveroch alebo\n"
-" tlaèiarne, ktoré posielajú dáta vo free-formed command.\n"
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-"PDQ podporuje iba lokálne tlaèiarne, vzdialené LPD a\n"
-"Socket/TCP tlaèiarne.\n"
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD a LPRng nepodporujú IPP tlaèiarne.\n"
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Oznaète tlaèiareò ktorú si ¾eláte prenies» a stlaète \n"
-"\"Prenos\"."
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "Neprená¹aj tlaèiarne"
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "Prenos"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Tlaèiareò s menom \"%s\" u¾ pod %s existuje.\n"
-"Stlaète \"Prenos\" na prepísanie.\n"
-"Mô¾ete tie¾ napísa» nové meno alebo preskoèi»\n"
-"túto tlaèiareò."
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Meno tlaèiarne mô¾e obsahova» iba písmená, èísla a podèiarkovník"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Tlaèiareò \"%s\" u¾ existuje.\n"
-"®eláte si prepísa» nastavenie ?"
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "Nové meno tlaèiarne"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Prená¹am %s ..."
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Naèítavam dáta tlaèiarne ..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Spú¹»am pripojenie..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Sie»ové slu¾by"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Nie je nastavený monitor"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Konfigurujem sie»"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Naèítavam dáta tlaèiarne ..."
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Vysoká"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoidná"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "Kontrolujem in¹talovaný softvér..."
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "Odstraòujem PLRng..."
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "Odstraòujem LPD..."
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Zvoµte tlaèovú frontu"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Aký typ tlaèového systému chcete pou¾íva»?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigurácia tlaèiarne"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Voµby tlaèiarne"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Naèítavam dáta tlaèiarne ..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "®eláte si nastavi» tlaèiareò?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Normálny mód"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Predvoµba)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Tlaèiareò na vzdialenom CUPS serveri"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "Tlaèiareò na vzdialenom CUPS serveri"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Pridaj tlaèiareò"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Otestova» konfiguráciu?"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "Zmena nastavenia tlaèiarne"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Tlaèiareò %s: %s %s\n"
-"èo chcete zmeni» na tejto tlaèiarni?"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "Urob to!"
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "Typ pripojenia tlaèiarne"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "Meno, popis a poloha tlaèiarne"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "Výrobca tlaèiarne, model, ovládaè"
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "Výrobca tlaèiarne, model"
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "Tlaè testovacích stránok"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "Odstráni» tlaèiareò"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Naèítavam dáta tlaèiarne ..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Naozaj chcete odstráni» tlaèiateò \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Naèítavam dáta tlaèiarne ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Nastavenie proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Vitajte v nástroji na nastavenie proxy servera.\n"
-"\n"
-"Teraz budete môc» nastavit pou¾ívanie FTP a\n"
-"HTTP proxy serverov a prístupové heslá.\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Prosím vyplò»e informácie pre HTTP proxy\n"
-"Nechajte prázdne ak nechcete HTTP proxy\n"
-"pou¾íva». "
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URL ma zaèína» 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Port má by» v èíselnom tvare"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Prosím vyplò»e informácie pre FTP proxy\n"
-"Nechajte prázdne ak nechcete FTP proxy\n"
-"pou¾íva». "
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL ma zaèína» 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Prosím vlo¾te prihlasovacie meno a heslo pre proxy.\n"
-"Nechajte prázdne ak heslo nepotrebujete. "
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "heslo"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "heslo e¹te raz"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Hesla nesúhlasia. Skúste znova!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nemô¾em prida» oddiel do _naformátovaného_ RAID poµa md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Nemô¾em zapísa» súbor %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid zlyhal"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid zlyhal (mo¾no nie sú nain¹talované raidtools)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nie je dos» oddielov pre RAID úrovne %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Spustenie ALSA (Advanced Linux Sound Architecture) zvukového systému"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, periodický plánovaè príkazov."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd sa pou¾íva pre monitorovanie (a zápis pomocou syslogu) stavu batérií.\n"
-"Mô¾ete ho tie¾ pou¾i» na vypnutie poèítaèa keï sa baterky takmer minú."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr "Spú¹»a príkazy nastavené cez príkaz at v stanovenom èase."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je ¹tandardný UNIXový program, ktorý spú¹»a príkazy naplánované\n"
-"u¾ívateµom. vixie cron pridáva viac mo¾ností konfigurácie."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM pridá podporu my¹i textovo orientovaným aplikáciám ako napríklad\n"
-"Midnight Commander. Takisto umo¾ní v textových konzolách kopírovanie\n"
-"pomocou my¹i a podporu pop-up menu."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake vyhµadáva nový harvér a nastavuje parametre\n"
-"nového alebo zmeneného hardvéru."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache je WWW server. Je pou¾ívaný na poskytovanie HTML stránok a\n"
-"CGI skriptov."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver démon (väè¹inou nazývaný inetd) poskytuje mnoho\n"
-"slu¾ieb súvisiacich s internetom. Je zodpovedný za spú¹»anie slu¾ieb\n"
-"ako telnet, ftp, rsh, rlogin a iné. Vypnutím inetd vypnete v¹etky\n"
-"slu¾by, za ktoré je zodpovedný."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Spustí filtrovanie paketov pre Linux kernel verzie 2.2 na \n"
-"ochranu vá¹ho poèítaèa pred útokmi zo siete."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Tento balík nahrá do pamäti vybranú klávesnicovú mapu z nastavenia v\n"
-"/etc/sysconfig/keyboard. Nastavenie sa dá meni» napríklad pomocou\n"
-"konfiguraèného nástroja kbdconfig."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatická obnova hlavièiek jadra v /boot\n"
-"pre /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatická detekcia a konfigurácia hardvéru pri ¹tarte."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf niekedy nastaví vykonanie rôznych úloh poèas\n"
-"zavádzania systému pre udr¾anie konfigurácie."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je tlaèový démon, ktorý je po¾adovaný pre správnu prácu nástroja lpr."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr "Linux Virtual Server sa pou¾íva na vysoko výkonné a HA rie¹enia."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) je doménový menný server (Domain Name Server (DNS)) pou¾ívaný\n"
-"na preklad z mena poèítaèa na IP adresu."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Pripája a odpája v¹etky NFS, SMB (Windows) a NCP (NetWare)\n"
-"body pripojenia."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivuje/Deaktivuje v¹etky sie»ové zariadenia konfigurované pre spustenie\n"
-"po zavedení systému."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je známy protokol, urèený na zdielanie súborov cez TCP/IP siete.\n"
-"Táto slu¾ba dovolí NFS servru exportova» adresáre predvolené v súbore\n"
-"/etc/exports"
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je známy protokol, urèený na zdielanie súborov cez TCP/IP siete.\n"
-"Táto slu¾ba pridá NFS servru funkciu lockovania súborov."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automaticky zapne num-lock pod konzolou a XFree pocas\n"
-"¹tartu systému."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podpora pre OKI 4w a kompatibilné win tlaèiarne."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Podpora PCMCIA je väè¹inou pou¾ívaná na sprístupnenie sie»ovej karty,\n"
-"alebo modemu v notebookoch."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmaper spravuje RPC pripojenia, ktoré sú pou¾ívané protokolmi ako\n"
-"NFS a NIS. Portmap server musí by» spustený na poèítaèoch, ktoré sú \n"
-"servrami pre protokoly pou¾ívajúce RPC mechanizmus."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix je Mail Transport Agent, èi¾e program, ktorý prená¹a e-maily\n"
-"z poèítaèa na poèítaè"
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Ukladá a obnovuje system entropy pool pre vy¹¹iu kvalitu generátora\n"
-"náhodných èísel."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Priradí základné zariadenie k blokovému (ako napríklad oddiely\n"
-"pevného disku) pre pou¾itie v aplikáciách ako Oracle"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed démon umo¾òuje automatickú úpravu smerovacích IP tabuliek\n"
-"cez RIP protokol. RIP je èastej¹ie pou¾ívaný na malých sietiach. Pre\n"
-"komplexnej¹ie siete je potrebný komplexný smerovací protokol."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Rstat protokol umo¾òuje u¾ívateµom získava» cez sie»\n"
-"informácie o za»a¾ení akéhokoµvek poèítaèa na sieti."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Rusers protokol umo¾òuje zisti» u¾ívateµom cez sie», kto je\n"
-"prihlásený na odpovedajúcich poèítaèoch."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Rwho protokol za¹le vzdialeným u¾ívateµom zoznam v¹etkých u¾ívateµov\n"
-"prihlásený na systéme, na ktorom je spustený rwho démon (podobne ako finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Spusti» zvukový systém na Va¹om poèítaèi"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog je mo¾nos», ktorú vyu¾íva mnoho démonov na ukladanie správ\n"
-"do rôznych systémových log súborov. Je dobré, keï je syslog v¾dy spustený."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Nahratie ovládaèov pre va¹e usb zariadenia."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Spú¹»a X Font Server (je potrebný pre spustenie XFree)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Zvoµte si slu¾by, ktoré budú spustené automaticky po ¹tarte systému"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "Tlaè"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "Mód systému"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Voµby vzdialenej lpd tlaèiarne"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Dtabázy"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Slu¾by"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "be¾í"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "stopnuté"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Slu¾by a démoni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"®iadne roz¹irujúce informácie\n"
-"o tejto slu¾be, prepáète."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Pri ¹tarte"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "In¹talujem balík %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Nedoká¾em preèíta» tabuµku rozdelenia disku, je príli¹ po¹kodená\n"
-"Skúsim odstráni» chybné oddiely"
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "Chyba!"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Nemô¾em nájst potrebný image file `%s'."
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Teraz mô¾ete nastavi» Autoin¹talaènú disketu. Táto mo¾nos» je èiastoène "
-"nebezpeèná a preto ju pou¾ívajte opatrne\n"
-"\n"
-"Budete môc» zopakova» in¹taláciu, ktorú ste spravili na tento poèítaè, s "
-"nekoµkými interaktívnymi krokmi (aby ste mohli zmeni» ich hodnoty)\n"
-"\n"
-"Pre maximálnu bezpeènos», rozdelenie disku a formátovanie sa nikdy nebude "
-"robi» automaticky.\n"
-"\n"
-"®eláte si pokraèova»?"
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "Automatické kroky konfigurácie"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Prosím pre ka¾dý krok zvoµte èi sa má zopakova» ako pri va¹ej in¹talácii "
-"alebo znovu nastavi»"
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Gratulujeme!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketa bola úspe¹ne vytvorená.\n"
-"Teraz mô¾ete zopakova» in¹taláciu."
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Zdieµanie pripojenia k internetu"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Zdieµanie internetového pripojenia je momentálne povolené"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Nastavenie zdieµania internetového pripojenia u¾ bolo urobené.\n"
-"Momentálne je povolené.\n"
-"\n"
-"Èo chcete urobi»?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "zakáza»"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "odmietnu»"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "prekonfigurova»"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Zakazujem servre..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Zdieµanie internetového pripojenia je teraz zakázane."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Zdieµanie internetového pripojenia je momentálne zakázane"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Nastavenie zdieµania internetového pripojenia u¾ bolo urobené.\n"
-"Momentálne je zakázané.\n"
-"\n"
-"Èo chcete urobi»?\""
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "povoli»"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Povoµujem servre..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Zdieµanie internetového pripojenia je teraz povolené."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Máte mo¾nos» nastavi» zdielanie pripojenia na internet. S touto funkciou\n"
-"budú môc» ostatné poèítaèe vo va¹ej lokálnej sieti pou¾íva» pripojenie na "
-"internet vá¹ho poèítaèa.\n"
-"\n"
-"Poznámka: Potrebujete samostatnú sie»ovú kartu na pripojenie lokálnej siete."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Rozhranie %s (pou¾íva modul %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Rozhranie %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Vo va¹om systéme nieje sie»ovy adaptér!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Vo va¹om systéme nebol nájdený sie»ovy ethernet adaptér. Prosím spustite "
-"konfiguráciu hardweru."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Sie»ove rozhranie"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Vo va¹om systéme je iba jeden sie»ový adaptér:\n"
-"\n"
-"%s\n"
-"\n"
-"Lokálna sie» bude nastavená práve s týmto adaptérom."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Prosím vyberte si sie»ovy adaptér, ktorý bude pripojený k va¹ej lokálnej "
-"sieti."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr "Pozor, sie»ový adaptér u¾ je nastavený. Teraz ho prekonfigurujem."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Potenciálny konflik LAN adries v aktuálnej konfigurácii %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Bola nájdená kofigurácia firewalu!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Pozor! Bola nájdená existujúca konfigurácia firewallu. Mo¾no budete musiet "
-"urobi» zopár ruènych zásahov po in¹talácii."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Konfigurácia..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Konfigurácia skriptov, in¹talovanie programov, ¹tart serverov..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problémy pri in¹talácii balíèka %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"V¹etko bolo nastavené.\n"
-"Teraz mô¾ete zdieµa» va¹e pripojenie na internet s ostatnými poèítaèmi na "
-"va¹ej lokálnej sieti pou¾itím automatickéhonastavenia siete (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Nastavenie u¾ bolo urobené a je momentálne zakázané."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Nastavenie u¾ bolo urobené a je momentálne povolené."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Zdieµanie internetového pripojenia e¹te nebolo nastavené."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Konfigurácia zdiaµania pripojenia k internetu"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Vítajte v utilite na zdieµanie pripojenia k internetu!\n"
-"\n"
-"%s\n"
-"\n"
-"Kliknite na Nastavi» ak chcete spusti» sprievodcu nastavením."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Konfigurácia siete (%d rozhraní)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Zma¾ profil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Zmena profilu:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Nový profil..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Meno poèítaèa: "
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Prístup k internetu"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Typ:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Brána:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Rozhranie:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Pripojený."
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Nepripojený"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Pripojenie..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Odpojenie..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Spú¹»am pripojenie..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Ukonèujem va¹e pripojenie..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Spojenie nieje ukonèené.\n"
-"Skúste ukonèi» manuálne spustením\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"ako root."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Systém je teraz pripojený odpojený."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Konfigurácia prístupu k internetu..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "Konfigurácia LAN"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Ovládaè"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Rozhranie"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Konfigurácia lokálnej siete..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Aplikova»"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Prosím èakajte... Aplikujem konfiguráciu"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nemáte nastavené ¾iadne rozhranie.\n"
-"Nastavte ho kliknutím na Konfiguruj"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "Konfigurácia LAN"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptér %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "©tartovací protokol"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Spustené pri ¹tarte"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "aktivuj teraz"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "deaktivuj teraz"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nemáte nastavené pripojenie na internet.\n"
-"Vytvorte ho zakliknutím tlaèítka konfiguruj"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Konfigurácia pripojenia internetu"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Konfigurácia pripojenia internetu"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Typ pripojenia: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parametre"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Ethernet karta"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "®iadna"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Veµmi slabá"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoidná"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Táto úroveò by mala by» pou¾ívaná opatrne. Zjednodu¹uje prácu so systémom,\n"
-"ale nemal by by» pripojený k iným poèítaèom, alebo k internetu. Nie sú\n"
-"toti¾ pou¾ívané ¾iadne heslá."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Je nastavené pou¾ívanie hesiel, ale pou¾itie tohoto poèítaèa v sieti nemô¾em "
-"doporuèi»."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr "V tejto úrovni je viac varovaní a kontroly."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Toto je ¹tandardná úroveò bezpeènosti pre poèítaè, ktorý je pou¾ívaný\n"
-"pre pripojenie k internetu ako klient."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"S touto úrovòou bezpeènosti sa stáva systém pou¾iteµný ako sie»ový server."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Máme v¹etky výhody úrovne 4, ale systém je úplne uzavretý.\n"
-"Bezpeènos» je jednoducho na najvy¹¹ej mo¾nej úrovni."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "Nastavujem úroveò bezpeènosti"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Zvoµte parametre servra"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Nastavujem úroveò bezpeènosti"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrolné centrum"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Vyberte nástroj, ktorý chcete pou¾i»"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "pou¾itie: keyboarddrake [--expert] [klávesnica]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Chcete aby BackSpace vrátil Delete na konzole?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Vymeò CD"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Prosím vlo¾te in¹talaèné CD do mechaniky a stlaète Ok.\n"
-"Ak ho nemáte, stlaète Zru¹i» pre priamu aktualizáciu."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Nemô¾em spusti» priamu aktualizáciu !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "nebolo nájdené serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Emulova» 3 tlaèítka?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Konfigurácia firewalu"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Konfigurácia firewalu"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"U¾ máte nastavený firewall.\n"
-"Kliknite na Nastavi» ak ho chcete zmeni» alebo odtráni»"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Kliknite na Nastavi» ak chcete nastavi» ¹tandardný firewall"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Voµba jazyka"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Voµba triedy in¹talácie"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detekcia pevného disku"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfigurácia my¹i"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Výber klávesnice"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Bezpeènos»"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Súborové systémy"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formátovanie oddielov"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Výber balíkov"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "In¹talácia systému"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Vytváranie u¾ívateµov"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Sie»ové slu¾by"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Nastavenie slu¾ieb"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Zavádzacia disketa"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "In¹talácia zavádzaèa"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfigurácia X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Koniec in¹talácie"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall konfigurátor\n"
-"\n"
-"Nastavuje osobný firewall pre vá¹ Linux Mandrake systém na tomto\n"
-"poèítaèi. "
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Teraz niekoµko otázok o tom, na ktoré slu¾by chcete dovoli» prístup\n"
-"z internetu. Prosím zva¾ujte èi potrebujete jednotlivé slu¾by preto¾e\n"
-"bezpeènos» vá¹ho poèítaèa je dôle¾itá.\n"
-"\n"
-"Ak nepou¾ívate tieto slu¾by, je lep¹ie zabráni» prístupu z internetu.\n"
-"Nastavenie mô¾ete zmeni» jednoducho opätovným spustením\n"
-"tejto aplikácie."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Chcete aby bol vá¹ www server dostupný z internetu ? Ak vám staèí\n"
-"dostupnos» iba z lokálneho servera, mô¾ete odpoveda» Nie.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Pou¾ívate na va¹om poèítaèi menný server ? Ak sa o va¹e DNS záznamy\n"
-"stará napríklad vá¹ poskytovateµ internetu, odpovedzte prosím nie. \n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Chcete dovoli» príchodzie Secure Shell (ssh) pripojenia ? Ssh je náhrada\n"
-"za telnet, ktorú mô¾ete pou¾i» na prihlásenie sa k vzdialenému serveru.\n"
-"Telnet nepou¾íva kódovanie. To znamená, ¾e útoèník mô¾e ukradnú» \n"
-"va¹e heslo. Ssh kódovanie pou¾íva, tak¾e kráde¾ vá¹ho hesla nehrozí."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Chcete dovoli» pripojenia cez telnet ? Toto je veµmi nebezpeèné.\n"
-"Silne doporuèujeme Tu odpoveda» NIE a pou¾i» ssh ako náhradu \n"
-"za telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Chcete pou¾íva» FTP server dosiahnuteµný cez internet ? Ak áno, veµmi \n"
-"doporuèujeme aby ste pou¾ívali iba anonymné prenosy. Akékoµvek heslo\n"
-"zaslané FTP serveru mô¾e by» ukradnuté, preto¾e FTP pri prenose hesiel\n"
-"nepou¾íva kódovanie.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Máte spustený mail server ? Ak pou¾ívate textové e-mail\n"
-"klieny ako pine, alebo mutt, tak asi máte. V opaènom prípade\n"
-"by ste túto slu¾bu mali vypnú».\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Máte spustené POP alebo IMAP slu¾by? Tieto mô¾u by»\n"
-"pou¾ité pre prístup k e-mailovým schránkam u¾ívateµov.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Vyzerá to, ¾e  máte kernel verzie 2.2.x. Ak je va¹a IP adresa\n"
-"automaticky nastavovaná pri zmene prostredia (domov, praca)\n"
-"potrebujete dovoli» túto mo¾nos». Je to tento prípad ?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Má vá¹ poèítaè synchronizovaný èas voèi inému poèítaèu?\n"
-"Väè¹inou sa táto slu¾ba pou¾íva v stredne veµkých organizáciách\n"
-"kôli jednotnému èasu v logoch a podobne. Ak nie ste súèas»\n"
-"nieèoho väè¹ieho a e¹te ste o takejto slu¾be nepoèuli, \n"
-"pravdepodobne to nebudete potrebova»."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Kofigurácia kompletná. Mám zapísa» zmeny na disk ?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Nemô¾em otvori» %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Nemô¾em otvori» %s pre zápis: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Sie»ovy poèítaè (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, SSH server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kancelária"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome stanica"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Nástroje pre vá¹ Palm Pilot alebo Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Pracovná stanica"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domain Name a Network Information Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kancelárske programy: editory (kword, abiword), tabuµkové procesory "
-"(kspread, gnumeric), pdf prehliadaèe, atd"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Nástroje pre audio: mp¹ alebo midi prehrávaèe, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knihy a návody pre Linux a Free Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE stanica"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, atï"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimédia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Nástroje na mail, správy, web, prenos súborov, a chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Dtabázy"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL alebo MySQL databázový server"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Nástroje na jednoduchú konfiguráciu vá¹ho poèítaèa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimédia - Zvuk"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Pomôcky"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentácia"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konzolové nástroje"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix mail server, Inn news server"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internetová stanica"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedialna stanica"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Konfigurácia LAN"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Viac grafických prostredí (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Enviroment, grafické prostredie s mno¾stvom pribalených programov"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafické prostredie"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Vývojárska"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache a Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Nástroje na vytvorenie a napálenie CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kancelárska stanica"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, atï"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafické programy ako napr. The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C a C++ vývojove kni¾nice, programy a include súbory"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Sie»ový server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Mail/Groupware/Správy"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Hracia stanica"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Prehravaèe a editory videa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimédia - Grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Zábavne programy: stolové, stratégie, atï"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Nástroje na èítanie a posielanie mailov a správ (pine, mutt, tin..) a "
-"prehliadanie www"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivácia, emulátory, monitorovanie"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Osobné financie"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Grafické rozhranie s aplikáciami a desktopovými nástrojmi"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienty pre rôzne protokoly vrátane ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Brána k internetu"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programy na prehrávanie/editovanie zvuku a videa"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Iné grafické prostredia"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editory, shelly, súborove nástroje, terminály"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programy na správu va¹ích financií, napr. gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Hry"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Osobný informaèný mana¾ment"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimédia - CD napaµovanie"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Vedecká stanica"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "nemô¾em otvori» /etc/sysconfig/autologin na èítanie: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Chcete re¹tartova» sie»"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Súhlasíte?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Chcem re¹tartova» sie»ové rozhranie:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Chcem re¹tartova» sie»ové rozhranie %s. Mô¾em?"
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Momentálne sú nastavené tieto tlaèiarne.\n"
-#~ "Mô¾ete pridáva» ïal¹ie, alebo meni» existujúce."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Timeout pripojenia (v sekundách) (beta, e¹te nieje implementované)"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Zvoµte predvoleného u¾ivateµa:"
-
-#~ msgid "Spooler: "
-#~ msgstr "Spooler:"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Prosím otestujte si my¹."
-
-#~ msgid "Press next to continue."
-#~ msgstr "Stlaète next pre pokraèovanie"
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (alebo ADSL) pripojenie"
-
-#~ msgid "Choose"
-#~ msgstr "Zvoµte"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Mô¾ete priamo ¹pecifikova» adresu pre CUPS tlaèiareò."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Áno, vytlaèi» ASCII testovaciu stránku"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Áno, vytlaèi» PostScript testovaciu stránku"
-
-#~ msgid "Yes, print both test pages"
-#~ msgstr "Áno, vytlaèi» obidve testovacie stránky"
-
-#~ msgid "Paper Size"
-#~ msgstr "Veµkos» papiera"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Vysunú» stránku na konci úlohy?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Parametre Uniprint ovládaèa"
-
-#~ msgid "Color depth options"
-#~ msgstr "Parametre farebnej håbky"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Tlaèi» text ako PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Opravi» schodíkový efekt?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Poèet strán na výstupné strany"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Pravý/¥avý okraj v bodoch (1/72 palca)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Horný/Dolný okraj v bodoch (1/72 palca)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Ïal¹ie parametre pre GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Ïal¹ie parametre textu"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Obrátené poradie stránok"
-
-#~ msgid "CUPS starting"
-#~ msgstr "©tart CUPS"
-
-#~ msgid "Reading CUPS drivers database..."
-#~ msgstr "Naèitávam databásu ovládaèov pre CUPS..."
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Zvoµte pripojenie vzdialenej tlaèiarne"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected.\n"
-#~ "In case of doubt, select \"Remote CUPS server\"."
-#~ msgstr ""
-#~ "S vzdialeným CUPS serverom nemusíte konfigurova»\n"
-#~ "tlaèiarne lokálne; tlaèiarne budú automaticky detekované.\n"
-#~ "V pripade neistoty zoµte \"Vzdiailený CUPS server\"."
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Ka¾dá tlaèiareò musí ma» meno (napríklad lp).\n"
-#~ "Taktie¾ mô¾u by» definované iné parametre ako sú popis alebo "
-#~ "umiestnenie.\n"
-#~ "Aké meno má by» pou¾ité pre túto tlaèiareò a\n"
-#~ "ako je táto tlaèiareò pripojená?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Ka¾dá tlaèová fronta (do ktorých sú posielané tlaèové úlohy)\n"
-#~ "potrebuje meno (èasto lp) a asociovaný spool adresár. Aké meno\n"
-#~ "a adresár bude pou¾ité pre túto frontu a ako bude pripojená tlaèiareò?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Meno fronty"
-
-#~ msgid "Spool directory"
-#~ msgstr "Spool adresár"
-
-#~ msgid "Light configuration"
-#~ msgstr "Jednoduchá konfigurácia"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1 poskytovateµa"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2 poskytovateµa"
-
-#~ msgid "fsck failed: "
-#~ msgstr "fsck zlýhalo: "
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Pre väè¹iu bezpeènos» vá¹ho systému by ste mali zvoli» \"Pou¾i shadow\"\n"
-#~ "a \"Pou¾i MD5 heslá\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Ak va¹a sie» pou¾íva NIS, nastavte \"Pou¾i NIS\". Ak ste si nie istý, \n"
-#~ "spýtajte sa vá¹ho sie»ového správcu."
-
-#~ msgid "yellow pages"
-#~ msgstr "¾lté stránky"
diff --git a/perl-install/share/po/sl.po b/perl-install/share/po/sl.po
deleted file mode 100644
index a72086b11..000000000
--- a/perl-install/share/po/sl.po
+++ /dev/null
@@ -1,7815 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# Alen Salamun <alien@alienworld.org>, 2000.
-# (1938)
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-06-02 17:16+0200\n"
-"PO-Revision-Date: 2000-09-05 20:49+0200\n"
-"Last-Translator: Alen Salamun <alien@alienworld.org>\n"
-"Language-Team: Slovenian\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Configure all heads independantly"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:233
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:236
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:239
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../Xconfigurator.pm_.c:240
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Graphic card"
-msgstr "Grafièna kartica"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Select a graphic card"
-msgstr "Izberite grafièno kartico"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "Choose a X server"
-msgstr "Izberite stre¾nik X"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "X server"
-msgstr "Stre¾nik X"
-
-#: ../../Xconfigurator.pm_.c:309 ../../Xconfigurator.pm_.c:316
-#: ../../Xconfigurator.pm_.c:366
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:312
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Katero nastavitev stre¾nika XFree ¾elite?"
-
-#: ../../Xconfigurator.pm_.c:324
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹a kartica lahko uporablja strojno 3D pospe¹evanje, ampak samo z XFree %"
-"s.\n"
-"Va¹a kartica je podprta s strani XFree %s, kjer je lahko bolj¹a 2D podpora."
-
-#: ../../Xconfigurator.pm_.c:326 ../../Xconfigurator.pm_.c:359
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Va¹a kartica lahko uporablja strojno 3D pospe¹evanje z XFree %s."
-
-#: ../../Xconfigurator.pm_.c:328 ../../Xconfigurator.pm_.c:361
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s s strojnim 3D pospe¹evanjem"
-
-#: ../../Xconfigurator.pm_.c:336 ../../Xconfigurator.pm_.c:350
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Va¹a kartica lahko uporablja strojno 3D pospe¹evanje z XFree %s,\n"
-"PODPORA JE ©E V RAZVOJU, RAÈUNALNIK SE LAHKO PRENEHA ODZIVATI."
-
-#: ../../Xconfigurator.pm_.c:338 ../../Xconfigurator.pm_.c:352
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s z RAZVOJNO strojno 3D pospe¹itvijo"
-
-#: ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹a kartica lahko uporablja strojno 3D pospe¹evanje, ampak samo z XFree %"
-"s,\n"
-"PODPORA JE ©E V RAZVOJU, RAÈUNALNIK SE LAHKO PRENEHA ODZIVATI.Va¹a kartica "
-"je podprta s strani XFree %s, kjer je lahko bolj¹a 2D podpora."
-
-#: ../../Xconfigurator.pm_.c:371
-msgid "XFree configuration"
-msgstr "Nastavitev XFree"
-
-#: ../../Xconfigurator.pm_.c:416
-msgid "Select the memory size of your graphic card"
-msgstr "Izberite velikost pomnilnika grafiène kartice"
-
-#: ../../Xconfigurator.pm_.c:463
-msgid "Choose options for server"
-msgstr "Izberite nastavitve stre¾nika"
-
-#: ../../Xconfigurator.pm_.c:480
-msgid "Choose a monitor"
-msgstr "Izberite monitor"
-
-#: ../../Xconfigurator.pm_.c:480
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:483
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Kritièna parametra sta: vertikalna osve¾itev (to je hitrost s katero je "
-"osve¾en celoten zaslon) in najbolj pomembna horizontalna osve¾itev (to je "
-"hitrost s katero so osve¾ene vrstice).\n"
-"\n"
-"ZELO POMEMBNO je, da ne izberete monitorja z osve¾itvami, ki so izven "
-"sposobnosti va¹ega monitorja. S tem lahko po¹kodujete monitor!\n"
-"Èe ste v dvomih, izberite konservativno nastavitev."
-
-#: ../../Xconfigurator.pm_.c:490
-msgid "Horizontal refresh rate"
-msgstr "Horizontalna sinhronizacija"
-
-#: ../../Xconfigurator.pm_.c:491
-msgid "Vertical refresh rate"
-msgstr "Vertikalna sinhronizacija"
-
-#: ../../Xconfigurator.pm_.c:528
-msgid "Monitor not configured"
-msgstr "Monitor ni nastavljen"
-
-#: ../../Xconfigurator.pm_.c:531
-msgid "Graphic card not configured yet"
-msgstr "Grafièna kartica ¹e ni nastavljena"
-
-#: ../../Xconfigurator.pm_.c:534
-msgid "Resolutions not chosen yet"
-msgstr "Loèljivost ¹e ni izbrana"
-
-#: ../../Xconfigurator.pm_.c:551
-msgid "Do you want to test the configuration?"
-msgstr "®elite preizkusiti nastavitev?"
-
-#: ../../Xconfigurator.pm_.c:555
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Pozor: testiranje te grafiène kartice lahko povzroèi neodzivanje raèunalnika"
-
-#: ../../Xconfigurator.pm_.c:558
-msgid "Test of the configuration"
-msgstr "Preizkus nastavitev"
-
-#: ../../Xconfigurator.pm_.c:597
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"poskusite spremeniti nekatere parametre"
-
-#: ../../Xconfigurator.pm_.c:597
-msgid "An error has occurred:"
-msgstr "Pri¹lo je do napake:"
-
-#: ../../Xconfigurator.pm_.c:619
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Zapu¹èam v %d sekundah"
-
-#: ../../Xconfigurator.pm_.c:630
-msgid "Is this the correct setting?"
-msgstr "Je to pravilna nastavitev?"
-
-#: ../../Xconfigurator.pm_.c:638
-msgid "An error has occurred, try to change some parameters"
-msgstr "Pri¹lo je do napake, poskusite spremeniti nekatere parametre"
-
-#: ../../Xconfigurator.pm_.c:684 ../../printerdrake.pm_.c:277
-#: ../../services.pm_.c:125
-msgid "Resolution"
-msgstr "Loèljivost"
-
-#: ../../Xconfigurator.pm_.c:731
-msgid "Choose the resolution and the color depth"
-msgstr "Izberite loèljivost in barvno globino"
-
-#: ../../Xconfigurator.pm_.c:733
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafièna kartica: %s"
-
-#: ../../Xconfigurator.pm_.c:734
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Stre¾nik XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:750 ../../standalone/draknet_.c:280
-#: ../../standalone/draknet_.c:283
-#, fuzzy
-msgid "Expert Mode"
-msgstr "Napredni naèin"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "Show all"
-msgstr "Poka¾i vse"
-
-#: ../../Xconfigurator.pm_.c:794
-msgid "Resolutions"
-msgstr "Loèljivosti"
-
-#: ../../Xconfigurator.pm_.c:1330
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Razpored tipkovnice: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1331
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tip mi¹ke: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1332
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Naprava mi¹ke: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1333
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1334
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Horizontalna frekvenca monitorja: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1335
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Vertikalna frekvenca monitorja: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1336
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafièna kartica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1337
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafièni pomnilnik: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1339
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Barvna globina: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1340
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Loèljivost: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1342
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Stre¾nik XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1343
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Gonilnik XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1362
-msgid "Preparing X-Window configuration"
-msgstr "Priprava nastavitev X-Windows"
-
-#: ../../Xconfigurator.pm_.c:1382
-msgid "What do you want to do?"
-msgstr "Kaj ¾elite narediti?"
-
-#: ../../Xconfigurator.pm_.c:1387
-msgid "Change Monitor"
-msgstr "Spremeni monitor"
-
-#: ../../Xconfigurator.pm_.c:1388
-msgid "Change Graphic card"
-msgstr "Spremeni grafièno kartico"
-
-#: ../../Xconfigurator.pm_.c:1390
-msgid "Change Server options"
-msgstr "Spremeni nastavitve stre¾nika"
-
-#: ../../Xconfigurator.pm_.c:1391
-msgid "Change Resolution"
-msgstr "Spremeni loèljivost"
-
-#: ../../Xconfigurator.pm_.c:1392
-msgid "Show information"
-msgstr "Poka¾i informacije"
-
-#: ../../Xconfigurator.pm_.c:1393
-msgid "Test again"
-msgstr "Testiraj ponovno"
-
-#: ../../Xconfigurator.pm_.c:1394 ../../bootlook.pm_.c:238
-msgid "Quit"
-msgstr "Izhod"
-
-#: ../../Xconfigurator.pm_.c:1402
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Ohrani spremembe?\n"
-"Trenutna nastavitev:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1423
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Za uveljavitev sprememb, se ponovno prijavite v %s"
-
-#: ../../Xconfigurator.pm_.c:1443
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Odjavite se in nato pritisnite Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1446
-msgid "X at startup"
-msgstr "X v zagonu"
-
-#: ../../Xconfigurator.pm_.c:1447
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Raèunalnik lahko samodejno pri zagonu sistema za¾ene stre¾nik X.\n"
-"®elite zagnati stre¾nik X pri zagonu?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 barv (8 bitov)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tisoè barv (15 bitov)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tisoè barv (16 bitov)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milijonov barv (24 bitov)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijarde barv (32 bitov)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB or more"
-msgstr "16 MB ali veè"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standardni VGA, 640×480 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800×600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Zdru¾ljiv z 8514, 1024×768 @ 87 Hz prepleteno (brez 800×600)"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024×768 @ 87 Hz prepleteno, 800×600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Raz¹irjen Super VGA, 800×600 @ 60 Hz, 640×480 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Neprepleten SVGA, 1024×768 @ 60 Hz, 800×600 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Visoko frekvenèen SVGA, 1024×768 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Monitor, ki zmore 1280×1024 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Monitor, ki zmore 1280×1024 @ 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Monitor, ki zmore 1280×1024 @ 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor, ki zmore 1600×1200 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor, ki zmore 1600×1200 @ 76 Hz"
-
-#: ../../any.pm_.c:99 ../../any.pm_.c:124
-msgid "First sector of boot partition"
-msgstr "Prvi sektor zagonskega razdelka"
-
-#: ../../any.pm_.c:99 ../../any.pm_.c:124 ../../any.pm_.c:197
-msgid "First sector of drive (MBR)"
-msgstr "Prvi sektor pogona (MBR)"
-
-#: ../../any.pm_.c:103
-msgid "SILO Installation"
-msgstr "Namestitev SILO"
-
-#: ../../any.pm_.c:104 ../../any.pm_.c:117
-msgid "Where do you want to install the bootloader?"
-msgstr "Kam ¾elite namestiti zagonski nalagalnik?"
-
-#: ../../any.pm_.c:116
-msgid "LILO/grub Installation"
-msgstr "Namestitev LILO/grub"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:142
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:130
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:131 ../../any.pm_.c:142
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:134
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:138
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:140 ../../any.pm_.c:142
-#, fuzzy
-msgid "Yaboot"
-msgstr "Korenski"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:180
-msgid "Bootloader main options"
-msgstr "Glavne mo¾nosti zagonskega nalagalnika"
-
-#: ../../any.pm_.c:149 ../../any.pm_.c:181
-#, fuzzy
-msgid "Bootloader to use"
-msgstr "Glavne mo¾nosti zagonskega nalagalnika"
-
-#: ../../any.pm_.c:151
-msgid "Bootloader installation"
-msgstr "Namestitev zagonskega nalagalnika"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:183
-msgid "Boot device"
-msgstr "Zagonska naprava"
-
-#: ../../any.pm_.c:154
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne deluje z starej¹imi BIOS-i)"
-
-#: ../../any.pm_.c:155
-msgid "Compact"
-msgstr "Kompaktno"
-
-#: ../../any.pm_.c:155
-msgid "compact"
-msgstr "kompaktno"
-
-#: ../../any.pm_.c:156 ../../any.pm_.c:256
-msgid "Video mode"
-msgstr "Grafièni naèin"
-
-#: ../../any.pm_.c:158
-msgid "Delay before booting default image"
-msgstr "Pavza pred zaganjanjem privzete slike"
-
-#: ../../any.pm_.c:160 ../../any.pm_.c:741
-#: ../../install_steps_interactive.pm_.c:904 ../../netconnect.pm_.c:629
-#: ../../printerdrake.pm_.c:98 ../../printerdrake.pm_.c:132
-#: ../../standalone/draknet_.c:569
-msgid "Password"
-msgstr "Geslo"
-
-#: ../../any.pm_.c:161 ../../any.pm_.c:742
-#: ../../install_steps_interactive.pm_.c:905
-msgid "Password (again)"
-msgstr "Geslo (ponovno)"
-
-#: ../../any.pm_.c:162
-msgid "Restrict command line options"
-msgstr "Omejitev mo¾nosti ukazne vrstice"
-
-#: ../../any.pm_.c:162
-msgid "restrict"
-msgstr "omeji"
-
-#: ../../any.pm_.c:164
-msgid "Clean /tmp at each boot"
-msgstr "Pri zagonu poèisti /tmp"
-
-#: ../../any.pm_.c:165
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Natan¹na velikost pomnilnika RAM, èe je potrebno (najdenih %d MB)"
-
-#: ../../any.pm_.c:167
-msgid "Enable multi profiles"
-msgstr "Omogoèi veè profilov"
-
-#: ../../any.pm_.c:171
-msgid "Give the ram size in MB"
-msgstr "Podajte velikost pomnilnika v MB"
-
-#: ../../any.pm_.c:173
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Mo¾nost ``Omejitev mo¾nosti ukazne vrstice'' ni uporabna brez gesla"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:718
-#: ../../install_steps_interactive.pm_.c:899
-msgid "Please try again"
-msgstr "Poskusite ponovno"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:718
-#: ../../install_steps_interactive.pm_.c:899
-msgid "The passwords do not match"
-msgstr "Gesla se ne ujemata"
-
-#: ../../any.pm_.c:182
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:184
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:185
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:186
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:187
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:188
-#, fuzzy
-msgid "Default OS?"
-msgstr "Privzeto"
-
-#: ../../any.pm_.c:210
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Tukaj so razlièni vnosi.\n"
-"Lahko dodate ¹e kak¹nega ali spremenite obstojeèega"
-
-#: ../../any.pm_.c:220 ../../printerdrake.pm_.c:356
-msgid "Add"
-msgstr "Dodaj"
-
-#: ../../any.pm_.c:220 ../../any.pm_.c:729 ../../diskdrake.pm_.c:46
-#: ../../printerdrake.pm_.c:356
-msgid "Done"
-msgstr "Konèano"
-
-#: ../../any.pm_.c:220
-#, fuzzy
-msgid "Modify"
-msgstr "Spremeni RAID"
-
-#: ../../any.pm_.c:228
-msgid "Which type of entry do you want to add?"
-msgstr "Kak¹en tip vnosa ¾elite dodati?"
-
-#: ../../any.pm_.c:229
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:229
-msgid "Other OS (SunOS...)"
-msgstr "Ostali OS (SunOS...)"
-
-#: ../../any.pm_.c:230
-msgid "Other OS (MacOS...)"
-msgstr "Ostali OS (MacOS...)"
-
-#: ../../any.pm_.c:230
-msgid "Other OS (windows...)"
-msgstr "Ostali OS (Okna...)"
-
-#: ../../any.pm_.c:250 ../../any.pm_.c:252
-msgid "Image"
-msgstr "Slika"
-
-#: ../../any.pm_.c:253 ../../any.pm_.c:264
-msgid "Root"
-msgstr "Korenski"
-
-#: ../../any.pm_.c:254 ../../any.pm_.c:283
-msgid "Append"
-msgstr "Pripni"
-
-#: ../../any.pm_.c:258
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:259
-msgid "Read-write"
-msgstr "Branje-pisanje"
-
-#: ../../any.pm_.c:266
-msgid "Table"
-msgstr "Tabela"
-
-#: ../../any.pm_.c:267
-msgid "Unsafe"
-msgstr "Tvegano"
-
-#: ../../any.pm_.c:274 ../../any.pm_.c:279 ../../any.pm_.c:282
-msgid "Label"
-msgstr "Labela"
-
-#: ../../any.pm_.c:276 ../../any.pm_.c:287
-msgid "Default"
-msgstr "Privzeto"
-
-#: ../../any.pm_.c:284
-#, fuzzy
-msgid "Initrd-size"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:286
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:294
-msgid "Remove entry"
-msgstr "Odstrani vnos"
-
-#: ../../any.pm_.c:297
-msgid "Empty label not allowed"
-msgstr "Prazna labela ni dovoljena"
-
-#: ../../any.pm_.c:298
-msgid "This label is already used"
-msgstr "Ta labela je ¾e uporabljena"
-
-#: ../../any.pm_.c:317
-msgid "What type of partitioning?"
-msgstr "Kateri tip razdelitve?"
-
-#: ../../any.pm_.c:608
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Najdenih %s %s vmesnikov"
-
-#: ../../any.pm_.c:609
-msgid "Do you have another one?"
-msgstr "Imate ¹e kak¹nega?"
-
-#: ../../any.pm_.c:610
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Imate vmesnike %s?"
-
-#: ../../any.pm_.c:612 ../../interactive.pm_.c:104 ../../my_gtk.pm_.c:616
-#: ../../printerdrake.pm_.c:237
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:612 ../../interactive.pm_.c:104 ../../my_gtk.pm_.c:616
-msgid "Yes"
-msgstr "Da"
-
-#: ../../any.pm_.c:613
-msgid "See hardware info"
-msgstr "Glejte informacije o strojni opremi"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:648
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Namestitev gonilnika za %s kartico %s"
-
-#: ../../any.pm_.c:649
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:660
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kateri %s gonilnik naj poizkusim?"
-
-#: ../../any.pm_.c:668
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"V nekaterih primerih potrebuje gonilnik %s za pravilno delovanje dodatne\n"
-" informacije. Lahko se zgodi, da deluje normalno tudi brez. ®elite navesti\n"
-"dodatne nastavitve zanj ali dovolite gonilniku da poskusi pridobiti "
-"potrebne\n"
-"informacije samodejno? Lahko se zgodi, da se raèunalnik nepredvidoma "
-"ustavi,\n"
-"kar pa naj ne bi povzroèilo nobene ¹kode."
-
-#: ../../any.pm_.c:673
-msgid "Autoprobe"
-msgstr "Samodejna zaznava"
-
-#: ../../any.pm_.c:673
-msgid "Specify options"
-msgstr "Navedite nastavitve"
-
-#: ../../any.pm_.c:677
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Sedaj lahko posredujete nastavitve za modul %s."
-
-#: ../../any.pm_.c:683
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sedaj lahko posredujete nastavitve za modul %s.\n"
-"Nastavitve so oblike ``ime=vrednost ime2=vrednost2 ...''.\n"
-"Na primer: ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:686
-msgid "Module options:"
-msgstr "Nastavitve modula:"
-
-#: ../../any.pm_.c:697
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Nalaganje modula %s je bilo neuspe¹no.\n"
-"®elite poskusiti znova z drugimi parametri?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid "(already added %s)"
-msgstr "(¾e dodano %s)"
-
-#: ../../any.pm_.c:719
-msgid "This password is too simple"
-msgstr "Geslo je preveè preprosto"
-
-#: ../../any.pm_.c:720
-msgid "Please give a user name"
-msgstr "Vnesite uporabni¹ko ime"
-
-#: ../../any.pm_.c:721
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Uporabni¹ko ime mora vsebovati samo male èrke, ¹tevilke, `-' in `_'"
-
-#: ../../any.pm_.c:722
-msgid "This user name is already added"
-msgstr "To uporabni¹ko ime je ¾e dodano"
-
-#: ../../any.pm_.c:726
-msgid "Add user"
-msgstr "Dodaj uporabnika"
-
-#: ../../any.pm_.c:727
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Vnesite uporabnika\n"
-"%s"
-
-#: ../../any.pm_.c:728
-msgid "Accept user"
-msgstr "Sprejmi uporabnika"
-
-#: ../../any.pm_.c:739
-msgid "Real name"
-msgstr "Pravo ime"
-
-#: ../../any.pm_.c:740 ../../printerdrake.pm_.c:97
-#: ../../printerdrake.pm_.c:131
-msgid "User name"
-msgstr "Uporabni¹ko ime"
-
-#: ../../any.pm_.c:743
-msgid "Shell"
-msgstr "Lupina"
-
-#: ../../any.pm_.c:745
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:766
-msgid "Autologin"
-msgstr "Samodejna prijava"
-
-#: ../../any.pm_.c:767
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"If you don't want to use this feature, click on the cancel button."
-msgstr ""
-"Raèunalnik lahko samodejno, po zagonu, v sistem prijavi uporabnika.\n"
-"Èe tega ne ¾elite, pritisnite gumb preklièi."
-
-#: ../../any.pm_.c:769
-msgid "Choose the default user:"
-msgstr "Izberite privzetega uporabnika:"
-
-#: ../../any.pm_.c:770
-msgid "Choose the window manager to run:"
-msgstr "Izberite okenskega upravitelja, ki naj bo pognan:"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:262 ../../bootloader.pm_.c:608
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Pozdravljeni v izbiralcu operacijskega sistema %s!\n"
-"\n"
-"Izberite operacijski sistem iz zgornjega seznama ali\n"
-"pocakajte %d sekund za prevzet zagon.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:809
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Pozdravljeni v izbiralcu operacijskega sistema GRUB!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:812
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Uporabite tipke %c in %c za izbiro vnosa"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:815
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite enter za zagon izbranega OS, 'e' za urejevanje"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:818
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ukazov pred zagonom ali 'c' za ukazno vrstico."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:821
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Izbran vnos bo zagnan samodejno cez %d sekund."
-
-#: ../../bootloader.pm_.c:825
-msgid "not enough room in /boot"
-msgstr "premalo prostora v /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:918
-msgid "Desktop"
-msgstr "Namizje"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:920
-msgid "Start Menu"
-msgstr "Meni Start"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pomoè ¹e ni implementirana.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Nastavitev zagonskega stila"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Datoteka"
-
-#: ../../bootlook.pm_.c:81
-msgid "/File/_New"
-msgstr "/Datoteka/_Nova"
-
-#: ../../bootlook.pm_.c:82
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../bootlook.pm_.c:84
-msgid "/File/_Open"
-msgstr "/Datoteka/_Odpri"
-
-#: ../../bootlook.pm_.c:85
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../bootlook.pm_.c:87
-msgid "/File/_Save"
-msgstr "/Datoteka/_Shrani"
-
-#: ../../bootlook.pm_.c:88
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../bootlook.pm_.c:90
-msgid "/File/Save _As"
-msgstr "/Datoteka/Shrani _kot"
-
-#: ../../bootlook.pm_.c:91
-msgid "/File/-"
-msgstr "/Datoteka/-"
-
-#: ../../bootlook.pm_.c:93
-msgid "/File/_Quit"
-msgstr "/Datoteka/_Izhod"
-
-#: ../../bootlook.pm_.c:94
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:96
-msgid "/_Options"
-msgstr "/_Mo¾nosti"
-
-#: ../../bootlook.pm_.c:98
-msgid "/Options/Test"
-msgstr "/Mo¾nosti/Test"
-
-#: ../../bootlook.pm_.c:99
-msgid "/_Help"
-msgstr "/_Pomoè"
-
-#: ../../bootlook.pm_.c:101
-msgid "/Help/_About..."
-msgstr "/Pomoè/_O pomoèi..."
-
-#: ../../bootlook.pm_.c:111 ../../standalone/drakgw_.c:634
-#: ../../standalone/draknet_.c:262 ../../standalone/tinyfirewall_.c:57
-#, fuzzy
-msgid "Configure"
-msgstr "Nastavitev X"
-
-#: ../../bootlook.pm_.c:114
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../bootlook.pm_.c:121
-msgid "Lilo/grub mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:131
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:134
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Monitor"
-
-#: ../../bootlook.pm_.c:137
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Spremeni monitor"
-
-#: ../../bootlook.pm_.c:140
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:144
-msgid "Launch Aurora at boot time"
-msgstr "Zagon Aurore pri nalaganju sistema"
-
-#: ../../bootlook.pm_.c:169
-msgid "Boot mode"
-msgstr "Zagonski naèin"
-
-#: ../../bootlook.pm_.c:179
-msgid "Launch the X-Window system at start"
-msgstr "Zagon sistema X-Windows pri zagonu sistema"
-
-#: ../../bootlook.pm_.c:187
-msgid "No, I don't want autologin"
-msgstr "Ne, ne ¾elim samodejne prijave"
-
-#: ../../bootlook.pm_.c:193
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Da, ¾elim samodejno prijavo s tem uporabnikom"
-
-#: ../../bootlook.pm_.c:210
-msgid "System mode"
-msgstr "Sistemski naèin"
-
-#: ../../bootlook.pm_.c:228
-#, fuzzy
-msgid "Default Runlevel"
-msgstr "Privzeto"
-
-#: ../../bootlook.pm_.c:236 ../../standalone/draknet_.c:88
-#: ../../standalone/draknet_.c:120 ../../standalone/draknet_.c:184
-#: ../../standalone/draknet_.c:302 ../../standalone/draknet_.c:396
-#: ../../standalone/draknet_.c:473 ../../standalone/draknet_.c:509
-#: ../../standalone/draknet_.c:617
-msgid "OK"
-msgstr "V redu"
-
-#: ../../bootlook.pm_.c:238 ../../install_steps_gtk.pm_.c:576
-#: ../../interactive.pm_.c:114 ../../interactive.pm_.c:269
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:357
-#: ../../my_gtk.pm_.c:360 ../../my_gtk.pm_.c:617
-#: ../../standalone/drakgw_.c:639 ../../standalone/draknet_.c:95
-#: ../../standalone/draknet_.c:127 ../../standalone/draknet_.c:295
-#: ../../standalone/draknet_.c:485 ../../standalone/draknet_.c:631
-#: ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Preklièi"
-
-#: ../../bootlook.pm_.c:315
-msgid "can not open /etc/inittab for reading: $!"
-msgstr "/etc/inittab ni mogoèe odpreti za branje: $!"
-
-#: ../../bootlook.pm_.c:369
-msgid "can not open /etc/sysconfig/autologin for reading: $!"
-msgstr "/etc/sysconfig/autologin ni mogoèe odpreti za branje: $!"
-
-#: ../../bootlook.pm_.c:435 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:21 ../../diskdrake.pm_.c:462
-msgid "Create"
-msgstr "Ustvari"
-
-#: ../../diskdrake.pm_.c:22
-msgid "Unmount"
-msgstr "Odklopi"
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:464
-msgid "Delete"
-msgstr "Izbri¹i"
-
-#: ../../diskdrake.pm_.c:23
-msgid "Format"
-msgstr "Formatiraj"
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:653
-msgid "Resize"
-msgstr "Spremeni velikost"
-
-#: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:462
-#: ../../diskdrake.pm_.c:518
-msgid "Type"
-msgstr "Tip"
-
-#: ../../diskdrake.pm_.c:24 ../../diskdrake.pm_.c:539
-msgid "Mount point"
-msgstr "Toèka priklopa"
-
-#: ../../diskdrake.pm_.c:38
-msgid "Write /etc/fstab"
-msgstr "Zapi¹i /etc/fstab"
-
-#: ../../diskdrake.pm_.c:39
-msgid "Toggle to expert mode"
-msgstr "Spremeni v napredni naèin"
-
-#: ../../diskdrake.pm_.c:40
-msgid "Toggle to normal mode"
-msgstr "Spremeni v normalen naèin"
-
-#: ../../diskdrake.pm_.c:41
-msgid "Restore from file"
-msgstr "Obnovi iz datoteke"
-
-#: ../../diskdrake.pm_.c:42
-msgid "Save in file"
-msgstr "Shrani v datoteko"
-
-#: ../../diskdrake.pm_.c:43
-msgid "Wizard"
-msgstr "Èarovnik"
-
-#: ../../diskdrake.pm_.c:44
-msgid "Restore from floppy"
-msgstr "Obnovi z diskete"
-
-#: ../../diskdrake.pm_.c:45
-msgid "Save on floppy"
-msgstr "Shrani na disketo"
-
-#: ../../diskdrake.pm_.c:49
-msgid "Clear all"
-msgstr "Izbri¹i vse"
-
-#: ../../diskdrake.pm_.c:54
-msgid "Format all"
-msgstr "Formatiraj vse"
-
-#: ../../diskdrake.pm_.c:55
-msgid "Auto allocate"
-msgstr "Samodejno dodeljevanje"
-
-#: ../../diskdrake.pm_.c:59
-msgid "All primary partitions are used"
-msgstr "Vsi primarni razdelki so uporabljeni"
-
-#: ../../diskdrake.pm_.c:59
-msgid "I can't add any more partition"
-msgstr "Razdelkov ni veè mogoèe dodati"
-
-#: ../../diskdrake.pm_.c:59
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Èe ¾elite imeti veè razdelkov, enega izbri¹ite, tako da bo mo¾no ustvariti "
-"raz¹irjen razdelek"
-
-#: ../../diskdrake.pm_.c:61
-#, fuzzy
-msgid "Not enough space for auto-allocating"
-msgstr "Premalo razpolo¾ljivega prostora za nov razdelek"
-
-#: ../../diskdrake.pm_.c:63
-msgid "Undo"
-msgstr "Razveljavi"
-
-#: ../../diskdrake.pm_.c:64
-msgid "Write partition table"
-msgstr "Zapi¹i razdelitveno tabelo"
-
-#: ../../diskdrake.pm_.c:65 ../../install_steps_interactive.pm_.c:185
-#, fuzzy
-msgid "More"
-msgstr "Premakni"
-
-#: ../../diskdrake.pm_.c:116
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:116
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:116
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:116
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:116
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:117
-msgid "Empty"
-msgstr "Prazno"
-
-#: ../../diskdrake.pm_.c:117 ../../install_steps_gtk.pm_.c:407
-#: ../../mouse.pm_.c:145
-msgid "Other"
-msgstr "Drugo"
-
-#: ../../diskdrake.pm_.c:123
-msgid "Filesystem types:"
-msgstr "Tipi datoteènih sistemov:"
-
-#: ../../diskdrake.pm_.c:132 ../../install_steps_gtk.pm_.c:577
-msgid "Details"
-msgstr "Podrobnosti"
-
-#: ../../diskdrake.pm_.c:147
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Imate velik FAT razdelek (ponavadi v uporabi\n"
-"DOS-a/Oken). Predlagamo vam, da najprej \n"
-"spremenite velikost tega razdelka (pritisnite\n"
-"nanj, nato pa pritisnite \"Spremeni velikost\")"
-
-#: ../../diskdrake.pm_.c:152
-msgid "Please make a backup of your data first"
-msgstr "Najprej naredite varnostno kopijo podatkov"
-
-#: ../../diskdrake.pm_.c:152 ../../diskdrake.pm_.c:170
-#: ../../diskdrake.pm_.c:179 ../../diskdrake.pm_.c:570
-#: ../../diskdrake.pm_.c:592
-msgid "Read carefully!"
-msgstr "Pazljivo preberite!"
-
-#: ../../diskdrake.pm_.c:155
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Èe nameravate uporabiti aboot, pustite dovolj prostega prostora (2048 "
-"sektorjev je dovolj)\n"
-"na zaèetku diska"
-
-#: ../../diskdrake.pm_.c:170
-msgid "Be careful: this operation is dangerous."
-msgstr "Bodite previdni: Ta operacija je nevarna."
-
-#: ../../diskdrake.pm_.c:214 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:322 ../../standalone/diskdrake_.c:66
-msgid "Error"
-msgstr "Napaka"
-
-#: ../../diskdrake.pm_.c:238 ../../diskdrake.pm_.c:748
-msgid "Mount point: "
-msgstr "Toèka priklopa:"
-
-#: ../../diskdrake.pm_.c:239 ../../diskdrake.pm_.c:298
-msgid "Device: "
-msgstr "Naprava:"
-
-#: ../../diskdrake.pm_.c:240
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Èrka DOS pogona: %s (ugibanje)\n"
-
-#: ../../diskdrake.pm_.c:244 ../../diskdrake.pm_.c:251
-#: ../../diskdrake.pm_.c:301
-msgid "Type: "
-msgstr "Tip:"
-
-#: ../../diskdrake.pm_.c:248
-#, fuzzy
-msgid "Name: "
-msgstr "Izberite stre¾nik"
-
-#: ../../diskdrake.pm_.c:253
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Zaèetek: sektor %s\n"
-
-#: ../../diskdrake.pm_.c:254
-#, c-format
-msgid "Size: %s"
-msgstr "Velikost: %s"
-
-#: ../../diskdrake.pm_.c:256
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorjev"
-
-#: ../../diskdrake.pm_.c:258
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Cilinder %d do cilinder %d\n"
-
-#: ../../diskdrake.pm_.c:259
-msgid "Formatted\n"
-msgstr "Formatirano\n"
-
-#: ../../diskdrake.pm_.c:260
-msgid "Not formatted\n"
-msgstr "Neformatirano\n"
-
-#: ../../diskdrake.pm_.c:261
-msgid "Mounted\n"
-msgstr "Priklopljeno\n"
-
-#: ../../diskdrake.pm_.c:262
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID ms%s\n"
-
-#: ../../diskdrake.pm_.c:264
-#, c-format
-msgid "Loopback file(s): %s\n"
-msgstr "Datoteka(e) loopback: %s\n"
-
-#: ../../diskdrake.pm_.c:265
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Prevzet zagonski razdelek\n"
-"    (za zagon MS-DOS, ne za lilo)\n"
-
-#: ../../diskdrake.pm_.c:267
-#, c-format
-msgid "Level %s\n"
-msgstr "Stopnja %s\n"
-
-#: ../../diskdrake.pm_.c:268
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Velikost kosa %s\n"
-
-#: ../../diskdrake.pm_.c:269
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diski %s\n"
-
-#: ../../diskdrake.pm_.c:271
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Datoteka loopback: %s"
-
-#: ../../diskdrake.pm_.c:274
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:277
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:294
-msgid "Please click on a partition"
-msgstr "Kliknite na razdelek"
-
-#: ../../diskdrake.pm_.c:299
-#, c-format
-msgid "Size: %s\n"
-msgstr "Velikost: %s\n"
-
-#: ../../diskdrake.pm_.c:300
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindrov, %s glav, %s sektorjev\n"
-
-#: ../../diskdrake.pm_.c:302
-#, fuzzy, c-format
-msgid "LVM-disks %s\n"
-msgstr "RAID-diski %s\n"
-
-#: ../../diskdrake.pm_.c:303
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tip razdelitvene tabele: %s\n"
-
-#: ../../diskdrake.pm_.c:304
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na vodilu %d id %d\n"
-
-#: ../../diskdrake.pm_.c:320
-msgid "Mount"
-msgstr "Priklopljeno"
-
-#: ../../diskdrake.pm_.c:322
-msgid "Active"
-msgstr "Aktivno"
-
-#: ../../diskdrake.pm_.c:324
-msgid "Add to RAID"
-msgstr "Dodaj k RAID"
-
-#: ../../diskdrake.pm_.c:326
-msgid "Remove from RAID"
-msgstr "Odstrani iz RAID"
-
-#: ../../diskdrake.pm_.c:328
-msgid "Modify RAID"
-msgstr "Spremeni RAID"
-
-#: ../../diskdrake.pm_.c:330
-#, fuzzy
-msgid "Add to LVM"
-msgstr "Dodaj k RAID"
-
-#: ../../diskdrake.pm_.c:332
-#, fuzzy
-msgid "Remove from LVM"
-msgstr "Odstrani iz RAID"
-
-#: ../../diskdrake.pm_.c:334
-msgid "Use for loopback"
-msgstr "Uporabi za loopback"
-
-#: ../../diskdrake.pm_.c:341
-msgid "Choose action"
-msgstr "Izberite akcijo"
-
-#: ../../diskdrake.pm_.c:435
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Oprostite, vendar /boot ne morete ustvariti tako daleè na pogonu (na "
-"cilinder > 1024).\n"
-"Ali boste uporabljali LILO, ki ne bo deloval ali pa ne boste uporabljali "
-"LILO, tako da /boot ne potrebujete"
-
-#: ../../diskdrake.pm_.c:439
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Razdelek, ki ste ga izbrali kot korenskega (/), se fizièno nahaja za\n"
-"1024-im cilindrom trdega diska in tudi razdelka /boot nimate.\n"
-"Èe nameravate uporabljati LILO, ne pozabite dodati /boot razdelka"
-
-#: ../../diskdrake.pm_.c:445
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Za korenski (/) razdelek ste izbrali programski RAID razdelek.\n"
-"Nobeden zagonski nalagalnik ne bo deloval brez /boot razdelka.\n"
-"Ne pozabite dodati /boot razdelka"
-
-#: ../../diskdrake.pm_.c:462 ../../diskdrake.pm_.c:464
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Namesto tega uporabite ``%s''"
-
-#: ../../diskdrake.pm_.c:468
-msgid "Use ``Unmount'' first"
-msgstr "Najprej uporabite ``Odklopi''"
-
-#: ../../diskdrake.pm_.c:469 ../../diskdrake.pm_.c:513
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Po spremembi tipa razdelka %s, bodo vsi podatki na tem razdelku izgubljeni"
-
-#: ../../diskdrake.pm_.c:481
-msgid "Continue anyway?"
-msgstr "Naj nadaljujem?"
-
-#: ../../diskdrake.pm_.c:486
-msgid "Quit without saving"
-msgstr "Zapri brez zapisovanja sprememb"
-
-#: ../../diskdrake.pm_.c:486
-msgid "Quit without writing the partition table?"
-msgstr "Zapri brez zapisovanja razdelitvene tabele?"
-
-#: ../../diskdrake.pm_.c:516
-msgid "Change partition type"
-msgstr "Spremeni tip razdelka"
-
-#: ../../diskdrake.pm_.c:517
-msgid "Which filesystem do you want?"
-msgstr "Kateri datoteèni sistem ¾elite?"
-
-#: ../../diskdrake.pm_.c:520 ../../diskdrake.pm_.c:780
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "ReiserFS ne morete uporabiti na razdelkih manj¹ih od 32MB"
-
-#: ../../diskdrake.pm_.c:537
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kam ¾elite priklopiti loopback datoteko %s?"
-
-#: ../../diskdrake.pm_.c:538
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kam ¾elite priklopiti napravo %s?"
-
-#: ../../diskdrake.pm_.c:542
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ne morem izklopiti toèke priklopa, ker je ta razdelek uporabljen za "
-"loopback.\n"
-"Najprej odstranite loopback"
-
-#: ../../diskdrake.pm_.c:561
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Po formatiranju razdelka %s bodo vsi podatki na tem razdelku izgubljeni"
-
-#: ../../diskdrake.pm_.c:563
-msgid "Formatting"
-msgstr "Formatiranje"
-
-#: ../../diskdrake.pm_.c:564
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatiranje loopback datoteko %s"
-
-#: ../../diskdrake.pm_.c:565 ../../install_steps_interactive.pm_.c:430
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiranje razdelka %s"
-
-#: ../../diskdrake.pm_.c:570
-msgid "After formatting all partitions,"
-msgstr "Po formatiranju vseh razdelkov,"
-
-#: ../../diskdrake.pm_.c:570
-msgid "all data on these partitions will be lost"
-msgstr "bodo vsi podatki na teh razdelkih izgubljeni"
-
-#: ../../diskdrake.pm_.c:576
-msgid "Move"
-msgstr "Premakni"
-
-#: ../../diskdrake.pm_.c:577
-msgid "Which disk do you want to move it to?"
-msgstr "Na kateri disk ¾elite premakniti?"
-
-#: ../../diskdrake.pm_.c:578
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake.pm_.c:579
-msgid "Which sector do you want to move it to?"
-msgstr "Na kateri sektor ¾elite premakniti?"
-
-#: ../../diskdrake.pm_.c:582
-msgid "Moving"
-msgstr "Premikanje"
-
-#: ../../diskdrake.pm_.c:582
-msgid "Moving partition..."
-msgstr "Premikanje razdelka..."
-
-#: ../../diskdrake.pm_.c:592
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Razdelitvena tabela pogona %s bo zapisana na disk!"
-
-#: ../../diskdrake.pm_.c:594
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Preden bodo obveljale spremembe morate ponovno zagnati raèunalnik"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Computing FAT filesystem bounds"
-msgstr "Raèunanje mej FAT datoteènega sistema"
-
-#: ../../diskdrake.pm_.c:615 ../../diskdrake.pm_.c:680
-#: ../../install_interactive.pm_.c:107
-msgid "Resizing"
-msgstr "Spreminjanje velikosti"
-
-#: ../../diskdrake.pm_.c:643
-#, fuzzy
-msgid "This partition is not resizeable"
-msgstr "Kateremu razdeleku ¾elite spremeniti velikost?"
-
-#: ../../diskdrake.pm_.c:648
-msgid "All data on this partition should be backed-up"
-msgstr "Podatki na tem razdelku naj bodo arhivirani"
-
-#: ../../diskdrake.pm_.c:650
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Po spremembi velikosti razdelka %s bodo vsi podatki na tem razdelku "
-"izgubljeni"
-
-#: ../../diskdrake.pm_.c:660
-msgid "Choose the new size"
-msgstr "Izberite novo velikost"
-
-#: ../../diskdrake.pm_.c:660 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../diskdrake.pm_.c:714
-msgid "Create a new partition"
-msgstr "Ustvarjanje novega razdelka"
-
-#: ../../diskdrake.pm_.c:740
-msgid "Start sector: "
-msgstr "Zaèetni sektor: "
-
-#: ../../diskdrake.pm_.c:744 ../../diskdrake.pm_.c:819
-msgid "Size in MB: "
-msgstr "Velikost v MB: "
-
-#: ../../diskdrake.pm_.c:747 ../../diskdrake.pm_.c:822
-msgid "Filesystem type: "
-msgstr "Tip datoteènega sistema: "
-
-#: ../../diskdrake.pm_.c:750
-msgid "Preference: "
-msgstr "Lastnosti:"
-
-#: ../../diskdrake.pm_.c:798
-msgid "This partition can't be used for loopback"
-msgstr "Ta razdelek ne more biti uporabljen za loopback"
-
-#: ../../diskdrake.pm_.c:808
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake.pm_.c:818
-msgid "Loopback file name: "
-msgstr "Ime loopback datoteke: "
-
-#: ../../diskdrake.pm_.c:844
-msgid "File already used by another loopback, choose another one"
-msgstr "Datoteko ¾e uporablja drug loopback, izberite drugo"
-
-#: ../../diskdrake.pm_.c:845
-msgid "File already exists. Use it?"
-msgstr "Datoteka ¾e obstaja. Jo uporabim?"
-
-#: ../../diskdrake.pm_.c:867 ../../diskdrake.pm_.c:883
-msgid "Select file"
-msgstr "Izberite datoteko"
-
-#: ../../diskdrake.pm_.c:876
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Velikost varnostne kopije zagonske tabele nima enake velikosti\n"
-"Naj nadaljujem?"
-
-#: ../../diskdrake.pm_.c:884
-msgid "Warning"
-msgstr "Opozorilo"
-
-#: ../../diskdrake.pm_.c:885
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Vstavite disketo v disketni pogon\n"
-"Vsi podatki na tej disketi bodo unièeni"
-
-#: ../../diskdrake.pm_.c:896
-msgid "Trying to rescue partition table"
-msgstr "Re¹evanje razdelitvene tabele"
-
-#: ../../diskdrake.pm_.c:905
-msgid "device"
-msgstr "naprava"
-
-#: ../../diskdrake.pm_.c:906
-msgid "level"
-msgstr "stopnja"
-
-#: ../../diskdrake.pm_.c:907
-msgid "chunk size"
-msgstr "velikost kosa"
-
-#: ../../diskdrake.pm_.c:919
-msgid "Choose an existing RAID to add to"
-msgstr "Izberite obstojeè RAID za dodajanje"
-
-#: ../../diskdrake.pm_.c:920 ../../diskdrake.pm_.c:946
-msgid "new"
-msgstr "nov"
-
-#: ../../diskdrake.pm_.c:944
-#, fuzzy
-msgid "Choose an existing LVM to add to"
-msgstr "Izberite obstojeè RAID za dodajanje"
-
-#: ../../diskdrake.pm_.c:949
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:976
-msgid "Removable media automounting"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:977
-msgid "Rescue partition table"
-msgstr "Re¹evanje razdelitvene tabele"
-
-#: ../../diskdrake.pm_.c:979
-msgid "Reload"
-msgstr "Nalo¾i ponovno"
-
-#: ../../fs.pm_.c:88 ../../fs.pm_.c:95 ../../fs.pm_.c:101 ../../fs.pm_.c:107
-#: ../../fs.pm_.c:113
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatiranje %s neuspe¹no"
-
-#: ../../fs.pm_.c:143
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Formatiranje %s s tipom %s ni poznano"
-
-#: ../../fs.pm_.c:230
-msgid "mount failed: "
-msgstr "priklop neuspe¹en: "
-
-#: ../../fs.pm_.c:242
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "napaka pri odklopu %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "preprosto"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "stre¾nik"
-
-#: ../../fsedit.pm_.c:262
-msgid "Mount points must begin with a leading /"
-msgstr "Toèke priklopa se morajo zaèeti z /"
-
-#: ../../fsedit.pm_.c:265
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Razdelek s toèko priklopa %s ¾e obstaja\n"
-
-#: ../../fsedit.pm_.c:273
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Kro¾ni priklopi %s\n"
-
-#: ../../fsedit.pm_.c:285
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:286
-msgid "This directory should remain within the root filesystem"
-msgstr "Da imenik bi naj ostal na korenskem datoteènem sistemu"
-
-#: ../../fsedit.pm_.c:287
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Za to toèko priklopa potrebujete pravi datoteèni sistem(ext2, reiserfs)\n"
-
-#: ../../fsedit.pm_.c:369
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Napaka pri odpiranju %s za pisanje: %s"
-
-#: ../../fsedit.pm_.c:453
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Pri¹lo je do napake - ni veljavnih naprav na katerih bi se lahko ustvaril "
-"nov datoteèni sistem. Preverite strojno opremo za mo¾en vzrok problema"
-
-#: ../../fsedit.pm_.c:467
-msgid "You don't have any partitions!"
-msgstr "Nimate razdelkov!"
-
-#: ../../help.pm_.c:9
-msgid ""
-"Please choose your preferred language for installation and system usage."
-msgstr "Izberite ¾eljen jezik za namestitev in uporabo sistema."
-
-#: ../../help.pm_.c:12
-msgid ""
-"You need to accept the terms of the above license to continue installation.\n"
-"\n"
-"\n"
-"Please click on \"Accept\" if you agree with its terms.\n"
-"\n"
-"\n"
-"Please click on \"Refuse\" if you disagree with its terms. Installation will "
-"end without modifying your current\n"
-"configuration."
-msgstr ""
-"Za nadaljevanje namestitve morate sprejeti pogoje zgornje licence.\n"
-"\n"
-"\n"
-"Kliknite na \"Sprejmem\", èe se strinjate z pogoji.\n"
-"\n"
-"\n"
-"Kliknite na \"Ne sprejmem\", èe se ne strinjate z pogoji. Namestitev se bo "
-"konèala brez sprememb na sistemu."
-
-#: ../../help.pm_.c:22
-msgid "Choose the layout corresponding to your keyboard from the list above"
-msgstr "Izberite iz seznama razpored, ki ustreza va¹i tipkovnici"
-
-#: ../../help.pm_.c:25
-msgid ""
-"If you wish other languages (than the one you choose at\n"
-"beginning of installation) will be available after installation, please "
-"chose\n"
-"them in list above. If you want select all, you just need to select \"All\"."
-msgstr ""
-"Èe ¾elite, da bodo po namestitvi na voljo tudi drugi jeziki\n"
-"(zraven jezika, ki ste ga izbrali na zaèetku namestitve), jih izberite\n"
-"s spodnjem seznamu. Èe ¾elite izbrati vse pritisnite \"Vse\"."
-
-#: ../../help.pm_.c:30
-#, fuzzy
-msgid ""
-"Please choose \"Install\" if there are no previous version of Linux-"
-"Mandrake\n"
-"installed or if you wish to use several operating systems.\n"
-"\n"
-"\n"
-"Please choose \"Update\" if you wish to update an already installed version "
-"of Linux-Mandrake.\n"
-"\n"
-"\n"
-"Depend of your knowledge in GNU/Linux, you can choose one of the following "
-"levels to install or update your\n"
-"Linux-Mandrake operating system:\n"
-"\n"
-"\t* Recommended: if you have never installed a GNU/Linux operating system "
-"choose this. Installation will be\n"
-"\t  be very easy and you will be asked only on few questions.\n"
-"\n"
-"\n"
-"\t* Customized: if you are familiar enough with GNU/Linux, you may choose "
-"the primary usage (workstation, server,\n"
-"\t  development) of your system. You will need to answer to more questions "
-"than in \"Recommended\" installation\n"
-"\t  class, so you need to know how GNU/Linux works to choose this "
-"installation class.\n"
-"\n"
-"\n"
-"\t* Expert: if you have a good knowledge in GNU/Linux, you can choose this "
-"installation class. As in \"Customized\"\n"
-"\t  installation class, you will be able to choose the primary usage "
-"(workstation, server, development). Be very\n"
-"\t  careful before choose this installation class. You will be able to "
-"perform a higly customized installation.\n"
-"\t  Answer to some questions can be very difficult if you haven't a good "
-"knowledge in GNU/Linux. So, don't choose\n"
-"\t  this installation class unless you know what you are doing."
-msgstr ""
-"Izberite \"Namestitev\", èe nimate name¹èene ¹e nobene razlièice Linux-"
-"Mandrake\n"
-"ali èe ¾elite uporabljati veè operacijskih sistemov.\n"
-"\n"
-"\n"
-"Izberite \"Nadgradnja\", èe ¾elite nadgraditi ¾e obstojeèo razlièico Linux-"
-"Mandrake.\n"
-"\n"
-"\n"
-"Glede na va¹e znanje o sistemu GNU/Linux, lahko izbirate med naslednjimi "
-"razredi namestitve ali nadgradnje\n"
-"operacijskega sistema Linux-Mandrake:\n"
-"\n"
-"\t* Priporoèeno: èe niste ¹e nikdar name¹èali operacijskega sistema GNU/"
-"Linux izberite to mo¾nost. Namestitev bo preprosta,\n"
-"\t  odgovoriti boste morali samo na nekaj vpra¹anj.\n"
-"\n"
-"\n"
-"\t* Prilagojeno: èe poznate operacijski sistem GNU/Linux, lahko izberete "
-"primarni namen uporabe (delovna postaja,\n"
-"\t  stre¾nik, razvoj) va¹ega sistema. Odgovoriti boste morali na veè "
-"vpra¹anj kot pri namestitvi \"Priporoèeno\",\n"
-"\t  tako da morate za izbiro te namestitvene mo¾nosti poznati operacijski "
-"sistem GNU/Linux.\n"
-" \n"
-"\n"
-"\t* Napredno: èe zelo dobro poznate operacijski sistem GNU/Linux, lahko "
-"izberete to mo¾nost. Kot pri namestitvi \n"
-"\t \"Prilagojeno\", boste lahko tudi tukaj izbrali primarni namen uporabe "
-"(delovna postaja, stre¾nik, razvoj). \n"
-"\t  Bodite pazljivi pri izbiri te namestitve. Namestili boste posebej visoko "
-"prilagojeno namestitev.\n"
-"\t  Odgovori na nekatera vpra¹anja so lahko te¾avni, èe nimate dovolj znanja "
-"o sistemu GNU/Linux. Ne izberite\n"
-"\t  tega razreda, razen èe veste kaj poènete."
-
-#: ../../help.pm_.c:56
-msgid ""
-"Select:\n"
-"\n"
-"  - Customized: If you are familiar enough with GNU/Linux, you may then "
-"choose\n"
-"    the primary usage for your machine. See below for details.\n"
-"\n"
-"\n"
-"  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-"    perform a highly customized installation. As for a \"Customized\"\n"
-"    installation class, you will be able to select the usage for your "
-"system.\n"
-"    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-"DOING!"
-msgstr ""
-"Izberite:\n"
-"\n"
-" - Prilagojeno: Èe ste dovolj seznanjeni z GNU/Linux-om lahko izberete\n"
-"   primaren namen uporabe sistema. Glejte spodaj za podrobnosti.\n"
-"\n"
-"\n"
-" - Napredno: Priporoèeno samo èe ste z GNU/Linux-om zelo dobro seznanjeni\n"
-"   in ¾elite opraviti visoko prilagojeno namestitev. Tudi tukaj boste lahko\n"
-"   izbrali primaren namen uporabe sistema.\n"
-"   IZBERITE TO MO®NOST, ÈE RESNIÈNO VESTE KAJ DELATE!"
-
-#: ../../help.pm_.c:68
-msgid ""
-"You must now define your machine usage. Choices are:\n"
-"\n"
-"\t* Workstation: this the ideal choice if you intend to use your machine "
-"primarily for everyday use, at office or\n"
-"\t  at home.\n"
-"\n"
-"\n"
-"\t* Development: if you intend to use your machine primarily for software "
-"development, it is the good choice. You\n"
-"\t  will then have a complete collection of software installed in order to "
-"compile, debug and format source code,\n"
-"\t  or create software packages.\n"
-"\n"
-"\n"
-"\t* Server: if you intend to use this machine as a server, it is the good "
-"choice. Either a file server (NFS or\n"
-"\t  SMB), a print server (Unix style or Microsoft Windows style), an "
-"authentication server (NIS), a database\n"
-"\t  server and so on. As such, do not expect any gimmicks (KDE, GNOME, etc.) "
-"to be installed."
-msgstr ""
-"Sedaj morate izbrati namen uporabe sistema. Mo¾nosti so:\n"
-"\n"
-"\t* Delovna postaja: izberite, èe boste uporabljali sistem predvsem za "
-"vsakodnevno uporabo\n"
-"\t  doma ali v pisarni.\n"
-"\n"
-"\n"
-"\t* Razvoj: èe boste sistem uporabljali predvsem za razvoj programske "
-"opreme, je to dobra izbira. Name¹èena\n"
-"\t  bo celotna zbirka programske opreme za prevajanje, razhro¹èevanje in "
-"oblikovanje izvorne kode in\n"
-"\t  ustvarjanje programskih paketov.\n"
-"\n"
-"\n"
-"\t* Stre¾nik: èe boste sistem uporabljali kot stre¾nik, je to dobra izbira. "
-"Namestili boste lahko datoteèni\n"
-"\t  stre¾nik (NFS ali SMB), tiskalni¹ki stre¾nik (Unix ali Microsoft Okna), "
-"overitveni stre¾nik (NIS), podatkovni\n"
-"\t  stre¾nik itd.. Ne prièakuje namestitve nobenih dodatnih stvari (KDE, "
-"GNOME, ipd.)."
-
-#: ../../help.pm_.c:84
-msgid ""
-"DrakX will attempt to look for PCI SCSI adapter(s). If DrakX\n"
-"finds an SCSI adapter and knows which driver to use, it will be "
-"automatically\n"
-"installed.\n"
-"\n"
-"\n"
-"If you have no SCSI adapter, an ISA SCSI adapter or a PCI SCSI adapter that\n"
-"DrakX doesn't recognize, you will be asked if a SCSI adapter is present in "
-"your\n"
-"system. If there is no adapter present, you can click on \"No\". If you "
-"click on\n"
-"\"Yes\", a list of drivers will be presented from which you can select your\n"
-"specific adapter.\n"
-"\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for "
-"the\n"
-"options. This usually works well.\n"
-"\n"
-"\n"
-"If not, you will need to provide options to the driver. Please review the "
-"User\n"
-"Guide (chapter 3, section \"Collective informations on your hardware) for "
-"hints\n"
-"on retrieving this information from hardware documentation, from the\n"
-"manufacturer's Web site (if you have Internet access) or from Microsoft "
-"Windows\n"
-"(if you have it on your system)."
-msgstr ""
-"DrakX bo sedaj posku¹al poiskati PCI SCSI krmilnik(e). \n"
-"Èe bo najden kak¹en SCSI krmilnik in prepoznan gonilnik zanj, bo gonilnik\n"
-"samodejno name¹èen.\n"
-"\n"
-"\n"
-"Èe nimate SCSI krmilnikov ali imate ISA ali PCI SCSI krmilnik, ki ga DrakX\n"
-"ne prepozna, boste vpra¹ani, èe imate v sistemu kak¹en SCSI krmilnik. Èe v\n"
-"sistemu nimate SCSI krmilnikov pritisnite \"Ne\". Èe boste pritisnili \"Da\" "
-"se\n"
-"vam bo odprl seznam gonilnikov, iz katerega lahko izberete krmilnik.\n"
-"\n"
-"\n"
-"Èe boste roèno izbrali gonilnik, vas bo DrakX vpra¹al èe ¾elite doloèiti\n"
-"nastavitve zanj. Dovolite DrakX-u, da jih poskusi nastaviti samodejno.\n"
-"\n"
-"\n"
-"Èe tega ne boste izbrali, boste morali nastavitve vnesti sami. Poglejte v\n"
-"uporabni¹ki priroènik (poglavje 3, razdelek \"Collective informations on "
-"your hardware)\n"
-"za nasvete, kako pridobiti to informacijo iz dokumentacije strojne opreme,\n"
-"spletne strani proizvajalca (èe imate dostop do internet-a) ali Microsoft "
-"Oken\n"
-"(èe jih imate name¹èena)."
-
-#: ../../help.pm_.c:108
-msgid ""
-"At this point, you need to choose where to install your\n"
-"Linux-Mandrake operating system on your hard drive. If it is empty or if an\n"
-"existing operating system uses all the space available on it, you need to\n"
-"partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Linux-Mandrake system.\n"
-"\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced "
-"user.\n"
-"This wizard simplifies this process. Before beginning, please consult the "
-"manual\n"
-"and take your time.\n"
-"\n"
-"\n"
-"You need at least two partitions. One is for the operating system itself and "
-"the\n"
-"other is for the virtual memory (also called Swap).\n"
-"\n"
-"\n"
-"If partitions have been already defined (from a previous installation or "
-"from\n"
-"another partitioning tool), you just need choose those to use to install "
-"your\n"
-"Linux system.\n"
-"\n"
-"\n"
-"If partitions haven't been already defined, you need to create them. \n"
-"To do that, use the wizard available above. Depending of your hard drive\n"
-"configuration, several solutions can be available:\n"
-"\n"
-"\t* Use existing partition: the wizard has detected one or more existing "
-"Linux partitions on your hard drive. If\n"
-"\t  you want to keep them, choose this option. \n"
-"\n"
-"\n"
-"\t* Erase entire disk: if you want delete all data and all partitions "
-"present on your hard drive and replace them by\n"
-"\t  your new Linux-Mandrake system, you can choose this option. Be careful "
-"with this solution, you will not be\n"
-"\t  able to revert your choice after confirmation.\n"
-"\n"
-"\n"
-"\t* Use the free space on the Windows partition: if Microsoft Windows is "
-"installed on your hard drive and takes\n"
-"\t  all space available on it, you have to create free space for Linux data. "
-"To do that you can delete your\n"
-"\t  Microsoft Windows partition and data (see \"Erase entire disk\" or "
-"\"Expert mode\" solutions) or resize your\n"
-"\t  Microsoft Windows partition. Resizing can be performed without loss of "
-"any data. This solution is\n"
-"\t  recommended if you want use both Linux-Mandrake and Microsoft Windows on "
-"same computer.\n"
-"\n"
-"\n"
-"\t  Before choosing this solution, please understand that the size of your "
-"Microsoft\n"
-"\t  Windows partition will be smaller than at present time. It means that "
-"you will have less free space under\n"
-"\t  Microsoft Windows to store your data or install new software.\n"
-"\n"
-"\n"
-"\t* Expert mode: if you want to partition manually your hard drive, you can "
-"choose this option. Be careful before\n"
-"\t  choosing this solution. It is powerful but it is very dangerous. You can "
-"lose all your data very easily. So,\n"
-"\t  don't choose this solution unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:160
-msgid ""
-"At this point, you need to choose what\n"
-"partition(s) to use to install your new Linux-Mandrake system. If "
-"partitions\n"
-"have been already defined (from a previous installation of GNU/Linux or "
-"from\n"
-"another partitioning tool), you can use existing partitions. In other "
-"cases,\n"
-"hard drive partitions must be defined.\n"
-"\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select "
-"the\n"
-"disk for partitioning by clicking on \"hda\" for the first IDE drive, \"hdb"
-"\" for\n"
-"the second or \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-"   * Clear all: this option deletes all partitions available on the selected "
-"hard drive.\n"
-"\n"
-"\n"
-"   * Auto allocate: this option allows you to automatically create Ext2 and "
-"swap partitions in free space of your\n"
-"     hard drive.\n"
-"\n"
-"\n"
-"   * Rescue partition table: if your partition table is damaged, you can try "
-"to recover it using this option. Please\n"
-"     be careful and remember that it can fail.\n"
-"\n"
-"\n"
-"   * Undo: you can use this option to cancel your changes.\n"
-"\n"
-"\n"
-"   * Reload: you can use this option if you wish to undo all changes and "
-"load your initial partitions table\n"
-"\n"
-"\n"
-"   * Wizard: If you wish to use a wizard to partition your hard drive, you "
-"can use this option. It is recommended if\n"
-"     you do not have a good knowledge in partitioning.\n"
-"\n"
-"\n"
-"   * Restore from floppy: if you have saved your partition table on a floppy "
-"during a previous installation, you can\n"
-"     recover it using this option.\n"
-"\n"
-"\n"
-"   * Save on floppy: if you wish to save your partition table on a floppy to "
-"be able to recover it, you can use this\n"
-"     option. It is strongly recommended to use this option\n"
-"\n"
-"\n"
-"   * Done: when you have finished partitioning your hard drive, use this "
-"option to save your changes.\n"
-"\n"
-"\n"
-"For information, you can reach any option using the keyboard: navigate "
-"trough the partitions using Tab and Up/Down arrows.\n"
-"\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-"           * Ctrl-c to create a new partition (when a empty partition is "
-"selected)\n"
-"\n"
-"           * Ctrl-d to delete a partition\n"
-"\n"
-"           * Ctrl-m to set the mount point\n"
-"           \n"
-"\n"
-"           \n"
-"If you are installing on a PPC Machine, you will want to create a small HFS "
-"'bootstrap' partition of at least 1MB for use\n"
-"by the yaboot bootloader. If you opt to make the partition a bit larger, say "
-"50MB, you may find it a useful place to store \n"
-"a spare kernel and ramdisk image for emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Above are listed the existing Linux partitions detected on\n"
-"your hard drive. You can keep choices make by the wizard, they are good for "
-"a\n"
-"common usage. If you change these choices, you must at least define a root\n"
-"partition (\"/\"). Don't choose a too little partition or you will not be "
-"able\n"
-"to install enough software. If you want store your data on a separate "
-"partition,\n"
-"you need also to choose a \"/home\" (only possible if you have more than "
-"one\n"
-"Linux partition available).\n"
-"\n"
-"\n"
-"For information, each partition is listed as follows: \"Name\", \"Capacity"
-"\".\n"
-"\n"
-"\n"
-"\"Name\" is coded as follow: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and "
-"\"sd\"\n"
-"if it is an SCSI hard drive.\n"
-"\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE "
-"hard drives:\n"
-"\n"
-"   * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-"   * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"\n"
-"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means "
-"\"secondary hard drive\", etc..."
-msgstr ""
-
-#: ../../help.pm_.c:258
-msgid ""
-"Choose the hard drive you want to erase to install your\n"
-"new Linux-Mandrake partition. Be careful, all data present on it will be "
-"lost\n"
-"and will not be recoverable."
-msgstr ""
-
-#: ../../help.pm_.c:263
-msgid ""
-"Click on \"OK\" if you want to delete all data and\n"
-"partitions present on this hard drive. Be careful, after clicking on \"OK\", "
-"you\n"
-"will not be able to recover any data and partitions present on this hard "
-"drive,\n"
-"including any Windows data.\n"
-"\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../help.pm_.c:273
-msgid ""
-"More than one Microsoft Windows partition have been\n"
-"detected on your hard drive. Please choose the one you want resize to "
-"install\n"
-"your new Linux-Mandrake operating system.\n"
-"\n"
-"\n"
-"For information, each partition is listed as follow; \"Linux name\", "
-"\"Windows\n"
-"name\" \"Capacity\".\n"
-"\n"
-"\"Linux name\" is coded as follow: \"hard drive type\", \"hard drive number"
-"\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and \"sd"
-"\"\n"
-"if it is an SCSI hard drive.\n"
-"\n"
-"\n"
-"\"Hard drive number\" is always a letter putted after \"hd\" or \"sd\". With "
-"IDE hard drives:\n"
-"\n"
-"   * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-"   * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-"   * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means "
-"\"secondary hard drive\", etc.\n"
-"\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first "
-"disk\n"
-"or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:306
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:309
-msgid ""
-"Any partitions that have been newly defined must be\n"
-"formatted for use (formatting meaning creating a filesystem).\n"
-"\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to "
-"erase\n"
-"the data they contain. If you wish do that, please also select the "
-"partitions\n"
-"you want to format.\n"
-"\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing "
-"partitions.\n"
-"You must reformat the partitions containing the operating system (such as \"/"
-"\",\n"
-"\"/usr\" or \"/var\") but do you no have to reformat partitions containing "
-"data\n"
-"that you wish to keep (typically /home).\n"
-"\n"
-"\n"
-"Please be careful selecting partitions, after formatting, all data will be\n"
-"deleted and you will not be able to recover any of them.\n"
-"\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"\n"
-"Click on \"Cancel\" if you want to choose other partitions to install your "
-"new\n"
-"Linux-Mandrake operating system."
-msgstr ""
-
-#: ../../help.pm_.c:335
-#, fuzzy
-msgid ""
-"You may now select the group of packages you wish to\n"
-"install or upgrade.\n"
-"\n"
-"\n"
-"DrakX will then check whether you have enough room to install them all. If "
-"not,\n"
-"it will warn you about it. If you want to go on anyway, it will proceed onto "
-"the\n"
-"installation of all selected groups but will drop some packages of lesser\n"
-"interest. At the bottom of the list you can select the option \n"
-"\"Individual package selection\"; in this case you will have to browse "
-"through\n"
-"more than 1000 packages..."
-msgstr ""
-"Sedaj lahko izberete skupino paketov, ki jih ¾elite\n"
-"namestiti ali nadgraditi\n"
-"\n"
-"DrakX bo nato preveril ali je za celotno namestitev na voljo dovolj "
-"prostora\n"
-"V primeru, da prostora ne bo dovolj, boste obve¹èeni. Èe boste kljub\n"
-"temu nadaljevali, se bo namestitev nadaljevala z izbranimi paketi, vendar\n"
-"bodo nekateri manj pomembni izpu¹èeni. Èe boste na dnu seznama izbrali "
-"mo¾nost\n"
-"\"Izbira posameznih paketov\", boste lahko izbirali med veè kot 1000 "
-"paketi..."
-
-#: ../../help.pm_.c:347
-msgid ""
-"You can now choose individually all the packages you\n"
-"wish to install.\n"
-"\n"
-"\n"
-"You can expand or collapse the tree by clicking on options in the left "
-"corner of\n"
-"the packages window.\n"
-"\n"
-"\n"
-"If you prefer to see packages sorted in alphabetic order, click on the icon\n"
-"\"Toggle flat and group sorted\".\n"
-"\n"
-"\n"
-"If you want not to be warned on dependencies, click on \"Automatic\n"
-"dependencies\". If you do this, note that unselecting one package may "
-"silently\n"
-"unselect several other packages which depend on it."
-msgstr ""
-
-#: ../../help.pm_.c:364
-#, fuzzy
-msgid ""
-"If you have all the CDs in the list above, click Ok. If you have\n"
-"none of those CDs, click Cancel. If only some CDs are missing, unselect "
-"them,\n"
-"then click Ok."
-msgstr ""
-"Èe imate vse CD-je iz spodnjega seznama, pritisnite 'V redu'.\n"
-"Èe nimate nobenega CD-ja iz spodnjega seznama, pritisnite 'Preklièi'.\n"
-"Èe nekateri CD-ji manjkajo, jih odizberite, nato pritisnite 'V redu'."
-
-#: ../../help.pm_.c:369
-msgid ""
-"Your new Linux-Mandrake operating system is currently being\n"
-"installed. This operation should take a few minutes (it depends on size you\n"
-"choose to install and the speed of your computer).\n"
-"\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:377
-msgid ""
-"You can now test your mouse. Use buttons and wheel to verify\n"
-"if settings are good. If not, you can click on \"Cancel\" to choose another\n"
-"driver."
-msgstr ""
-
-#: ../../help.pm_.c:382
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1\n"
-"port under MS Windows is named ttyS0 under GNU/Linux."
-msgstr ""
-"Izberite pravilna vrata. Npr: COM1 pod Okni so poimenovana ttyS0\n"
-"pod GNU/Linux-om."
-
-#: ../../help.pm_.c:386
-msgid ""
-"If you wish to connect your computer to the Internet or\n"
-"to a local network please choose the correct option. Please turn on your "
-"device\n"
-"before choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"\n"
-"If you do not have any connection to the Internet or a local network, "
-"choose\n"
-"\"Disable networking\".\n"
-"\n"
-"\n"
-"If you wish to configure the network later after installation or if you "
-"have\n"
-"finished to configure your network connection, choose \"Done\"."
-msgstr ""
-
-#: ../../help.pm_.c:399
-msgid ""
-"No modem has been detected. Please select the serial port on which it is "
-"plugged.\n"
-"\n"
-"\n"
-"For information, the first serial port (called \"COM1\" under Microsoft\n"
-"Windows) is called \"ttyS0\" under Linux."
-msgstr ""
-
-#: ../../help.pm_.c:406
-msgid ""
-"You may now enter dialup options. If you don't know\n"
-"or are not sure what to enter, the correct informations can be obtained "
-"from\n"
-"your Internet Service Provider. If you do not enter the DNS (name server)\n"
-"information here, this information will be obtained from your Internet "
-"Service\n"
-"Provider at connection time."
-msgstr ""
-
-#: ../../help.pm_.c:413
-msgid ""
-"If your modem is an external modem, please turn on it now to let DrakX "
-"detect it automatically."
-msgstr ""
-
-#: ../../help.pm_.c:416
-msgid "Please turn on your modem and choose the correct one."
-msgstr ""
-
-#: ../../help.pm_.c:419
-msgid ""
-"If you are not sure if informations above are\n"
-"correct or if you don't know or are not sure what to enter, the correct\n"
-"informations can be obtained from your Internet Service Provider. If you do "
-"not\n"
-"enter the DNS (name server) information here, this information will be "
-"obtained\n"
-"from your Internet Service Provider at connection time."
-msgstr ""
-
-#: ../../help.pm_.c:426
-#, fuzzy
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, the correct informations can be\n"
-"obtained from your Internet Service Provider."
-msgstr ""
-"Sedaj lahko vnesete mo¾nosti omre¾ja na klic. Èe niste preprièani kaj "
-"vnesti,\n"
-"dobite pravilne informacije pri va¹em ponudniku internet-a."
-
-#: ../../help.pm_.c:431
-#, fuzzy
-msgid ""
-"You may now configure your network device.\n"
-"\n"
-"   * IP address: if you don't know or are not sure what to enter, ask your "
-"network administrator.\n"
-"     You should not enter an IP address if you select the option \"Automatic "
-"IP\" below.\n"
-"\n"
-"   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-"know or are not sure what to enter,\n"
-"     ask your network administrator.\n"
-"\n"
-"   * Automatic IP: if your network uses BOOTP or DHCP protocol, select this "
-"option. If selected, no value is needed in\n"
-"    \"IP address\". If you don't know or are not sure if you need to select "
-"this option, ask your network administrator."
-msgstr ""
-"Vnesite:\n"
-"\n"
-"  - Naslov IP: èe ga ne poznate, povpra¹ajte vzdr¾evalca va¹ega omre¾ja.\n"
-"\n"
-"\n"
-"  - Omre¾na maska: \"255.255.255.0\" je ponavadi pravilna izbira. Èe niste\n"
-"preprièani, povpra¹ajte vzdr¾evalca omre¾ja.\n"
-"\n"
-"\n"
-"  - Samodejni IP: izberite to mo¾nost, èe v omre¾ju uporabljate protokol\n"
-"BOOTP ali DHCP. Pri izbiri te mo¾nosti ni potrebno vnesti \"Naslov IP\". Èe\n"
-"niste preprièani, povpra¹ajte vzdr¾evalca va¹ega omre¾ja.\n"
-
-#: ../../help.pm_.c:443
-#, fuzzy
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, ask your network administrator."
-msgstr ""
-"Èe va¹e omre¾je uporablja NIS, izberite \"Uporabi NIS\". Èe niste "
-"preprièani,\n"
-"povpra¹ajte vzdr¾evalca va¹ega omre¾ja."
-
-#: ../../help.pm_.c:447
-msgid ""
-"You may now enter your host name if needed. If you\n"
-"don't know or are not sure what to enter, leave blank."
-msgstr ""
-
-#: ../../help.pm_.c:451
-msgid ""
-"You may now enter dialup options. If you're not sure what to enter, the\n"
-"correct information can be obtained from your ISP."
-msgstr ""
-"Sedaj lahko vnesete mo¾nosti omre¾ja na klic. Èe niste preprièani kaj "
-"vnesti,\n"
-"dobite pravilne informacije pri va¹em ponudniku internet-a."
-
-#: ../../help.pm_.c:455
-msgid ""
-"If you will use proxies, please configure them now. If you don't know if\n"
-"you should use proxies, ask your network administrator or your ISP."
-msgstr ""
-"Èe boste uporabljali stre¾nik proxy, ga sedaj nastavite. Èe niste "
-"preprièani\n"
-"ali naj ga uporabljate, povpra¹ajte va¹ega ponudnika internet-a."
-
-#: ../../help.pm_.c:459
-#, fuzzy
-msgid ""
-"You can install cryptographic package if your internet connection has been\n"
-"set up correctly. First choose a mirror where you wish to download packages "
-"and\n"
-"after that select the packages to install.\n"
-"\n"
-"\n"
-"Note you have to select mirror and cryptographic packages according\n"
-"to your legislation."
-msgstr ""
-"Paket za kriptografijo lahko namestite, èe ste pravilno namestili povezavo "
-"v\n"
-"internet. Najprej izberite zrcalni stre¾nik iz katerega ¾elite prenesti\n"
-"pakete, nato izberite pakete, katere ¾elite namestiti.\n"
-"\n"
-"Zrcalni stre¾nik in pakete izberite v skladu z va¹o zakonodajo."
-
-#: ../../help.pm_.c:468
-msgid "You can now select your timezone according to where you live."
-msgstr ""
-
-#: ../../help.pm_.c:471
-#, fuzzy
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage\n"
-"Time) and translates it in local time according to the time zone you have\n"
-"selected.\n"
-"\n"
-"\n"
-"If you use Microsoft Windows on this computer, choose \"No\"."
-msgstr ""
-"Sedaj lahko izberete èasovno cono, glede na to kje ¾ivite.\n"
-"\n"
-"\n"
-"GNU/Linux uporablja èas v formatu GMT ali \"Greenwich Mean Time\" in ga\n"
-"prevede v lokalni èas glede na izbrano èasovno cono."
-
-#: ../../help.pm_.c:479
-#, fuzzy
-msgid ""
-"You may now choose which services you want to start at boot time.\n"
-"\n"
-"\n"
-"When your mouse comes over an item, a small balloon help will popup which\n"
-"describes the role of the service.\n"
-"\n"
-"\n"
-"Be very careful in this step if you intend to use your machine as a server: "
-"you\n"
-"will probably want not to start any services that you don't need. Please\n"
-"remember that several services can be dangerous if they are enable on a "
-"server.\n"
-"In general, select only the services that you really need."
-msgstr ""
-"Sedaj lahko izberete servise, ki se naj za¾enejo pri zagonu. Ko boste z\n"
-"mi¹ko nad servisom, se vam bo prikazal balonèek s pomoèjo, ki opisuje\n"
-"vlogo posameznega servisa.\n"
-"\n"
-"Bodite posebej pozorni pri tem koraku, èe boste raèunalnik uporabljali kot\n"
-"stre¾nik: verjetno ne boste ¾eleli poganjati servisov, ki jih ne ¾elite."
-
-#: ../../help.pm_.c:492
-msgid ""
-"You can configure a local printer (connected to your computer) or remote\n"
-"printer (accessible via a Unix, Netware or Microsoft Windows network)."
-msgstr ""
-
-#: ../../help.pm_.c:496
-msgid ""
-"If you wish to be able to print, please choose one printing system between\n"
-"CUPS and LPR.\n"
-"\n"
-"\n"
-"CUPS is a new, powerful and flexible printing system for Unix systems (CUPS\n"
-"means \"Common Unix Printing System\"). It is the default printing system "
-"in\n"
-"Linux-Mandrake.\n"
-"\n"
-"\n"
-"LPR is the old printing system used in previous Linux-Mandrake "
-"distributions.\n"
-"\n"
-"\n"
-"If you don't have printer, click on \"None\"."
-msgstr ""
-
-#: ../../help.pm_.c:511
-msgid ""
-"GNU/Linux can deal with many types of printer. Each of these types requires\n"
-"a different setup.\n"
-"\n"
-"\n"
-"If your printer is physically connected to your computer, select \"Local\n"
-"printer\".\n"
-"\n"
-"\n"
-"If you want to access a printer located on a remote Unix machine, select\n"
-"\"Remote printer\".\n"
-"\n"
-"\n"
-"If you want to access a printer located on a remote Microsoft Windows "
-"machine\n"
-"(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-msgstr ""
-
-#: ../../help.pm_.c:527
-msgid ""
-"Please turn on your printer before continuing to let DrakX detect it.\n"
-"\n"
-"You have to enter some informations here.\n"
-"\n"
-"\n"
-"   * Name of printer: the print spooler uses \"lp\" as default printer name. "
-"So, you must have a printer named \"lp\".\n"
-"     If you have only one printer, you can use several names for it. You "
-"just need to separate them by a pipe\n"
-"     character (a \"|\"). So, if you prefer a more meaningful name, you have "
-"to put it first, eg: \"My printer|lp\".\n"
-"     The printer having \"lp\" in its name(s) will be the default printer.\n"
-"\n"
-"\n"
-"   * Description: this is optional but can be useful if several printers are "
-"connected to your computer or if you allow\n"
-"     other computers to access to this printer.\n"
-"\n"
-"\n"
-"   * Location: if you want to put some information on your\n"
-"     printer location, put it here (you are free to write what\n"
-"     you want, for example \"2nd floor\").\n"
-msgstr ""
-
-#: ../../help.pm_.c:548
-msgid ""
-"You need to enter some informations here.\n"
-"\n"
-"\n"
-"   * Name of queue: the print spooler uses \"lp\" as default printer name. "
-"So, you need have a printer named \"lp\".\n"
-"    If you have only one printer, you can use several names for it. You just "
-"need to separate them by a pipe\n"
-"    character (a \"|\"). So, if you prefer to have a more meaningful name, "
-"you have to put it first, eg: \"My printer|lp\".\n"
-"    The printer having \"lp\" in its name(s) will be the default printer.\n"
-"\n"
-"  \n"
-"   * Spool directory: it is in this directory that printing jobs are stored. "
-"Keep the default choice\n"
-"     if you don't know what to use\n"
-"\n"
-"\n"
-"   * Printer Connection: If your printer is physically connected to your "
-"computer, select \"Local printer\".\n"
-"     If you want to access a printer located on a remote Unix machine, "
-"select \"Remote lpd printer\".\n"
-"\n"
-"\n"
-"     If you want to access a printer located on a remote Microsoft Windows "
-"machine (or on Unix machine using SMB\n"
-"     protocol), select \"SMB/Windows 95/98/NT\".\n"
-"\n"
-"\n"
-"     If you want to acces a printer located on NetWare network, select "
-"\"NetWare\".\n"
-msgstr ""
-
-#: ../../help.pm_.c:573
-msgid ""
-"Your printer has not been detected. Please enter the name of the device on\n"
-"which it is connected.\n"
-"\n"
-"\n"
-"For information, most printers are connected on the first parallel port. "
-"This\n"
-"one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-"Windows."
-msgstr ""
-
-#: ../../help.pm_.c:581
-msgid "You must now select your printer in the above list."
-msgstr ""
-
-#: ../../help.pm_.c:584
-msgid ""
-"Please select the right options according to your printer.\n"
-"Please see its documentation if you don't know what choose here.\n"
-"\n"
-"\n"
-"You will be able to test your configuration in next step and you will be "
-"able to modify it if it doesn't work as you want."
-msgstr ""
-
-#: ../../help.pm_.c:591
-#, fuzzy
-msgid ""
-"You can now enter the root password for your Linux-Mandrake system.\n"
-"The password must be entered twice to verify that both password entries are "
-"identical.\n"
-"\n"
-"\n"
-"Root is the system's administrator and is the only user allowed to modify "
-"the\n"
-"system configuration. Therefore, choose this password carefully. \n"
-"Unauthorized use of the root account can be extemely dangerous to the "
-"integrity\n"
-"of the system, its data and other system connected to it.\n"
-"\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. It should never be written down.\n"
-"\n"
-"\n"
-"Do not make the password too long or complicated, though: you must be able "
-"to\n"
-"remember it without too much effort."
-msgstr ""
-"Sedaj lahko vnesete geslo root za va¹ sistem Linux-Mandrake\n"
-"Geslo morate vnesti dvakrat, da se preveri identiènost obeh\n"
-"vnosov.\n"
-"\n"
-"Uporabnik root je administrator sistema in edini uporabnik, ki lahko\n"
-"spreminja nastavitev sistema. Zato izberite geslo posebej pazljivo!\n"
-"Neavtorizirana uporaba raèuna root je lahko zelo nevarna za integriteto\n"
-"va¹ega sistema in podatkov, ter ostalih sistemov povezanih nanj. Geslo naj\n"
-"bo sestavljeno iz alfanumeriènih znakov in dolgo vsaj 8 znakov. NIKOLI ga\n"
-"nikamor ne zapisujte. Ne izberite predolgega ali preveè kompliciranega\n"
-"gesla, da ga ne boste pozabili!"
-
-#: ../../help.pm_.c:609
-msgid ""
-"To enable a more secure system, you should select \"Use shadow file\" and\n"
-"\"Use MD5 passwords\"."
-msgstr ""
-"Za bolj varen sistem izberite \"Uporabi datoteko 'shadow'\" in\n"
-"\"Uporabi gesla MD5\"."
-
-#: ../../help.pm_.c:613
-msgid ""
-"If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n"
-"network administrator."
-msgstr ""
-"Èe va¹e omre¾je uporablja NIS, izberite \"Uporabi NIS\". Èe niste "
-"preprièani,\n"
-"povpra¹ajte vzdr¾evalca va¹ega omre¾ja."
-
-#: ../../help.pm_.c:617
-msgid ""
-"You may now create one or more \"regular\" user account(s), as\n"
-"opposed to the \"privileged\" user account, root. You can create\n"
-"one or more account(s) for each person you want to allow to use\n"
-"the computer. Note that each user account will have its own\n"
-"preferences (graphical environment, program settings, etc.)\n"
-"and its own \"home directory\", in which these preferences are\n"
-"stored.\n"
-"\n"
-"\n"
-"First of all, create an account for yourself! Even if you will be the only "
-"user\n"
-"of the machine, you may NOT connect as root for daily use of the system: "
-"it's a\n"
-"very high security risk. Making the system unusable is very often a typo "
-"away.\n"
-"\n"
-"\n"
-"Therefore, you should connect to the system using the user account\n"
-"you will have created here, and login as root only for administration\n"
-"and maintenance purposes."
-msgstr ""
-"Sedaj lahko ustvarite enega ali veè \"navadnih\" uporabni¹kih raèunov.\n"
-"Ustvarite lahko enega ali veè raèunov za vsako osebo, ki ji boste dovolili\n"
-"uporabo raèunalnika. Vsak uporabnik bo imel svoje lastnosti (grafièno\n"
-"okolje, nastavitve programov itd.) in svoj \"domaè imenik\", v katerem bodo\n"
-"te lastnosti shranjene.\n"
-"\n"
-"Najprej ustvarite raèun zase! Tudi èe boste edin uporabnik sistema, se NE\n"
-"PRIJAVLJAJTE kot root za vsakodnevna opravila. To bi bil velik varnosti\n"
-"riziko, saj je neuporabnost sistema lahko oddaljena samo eno tipkarsko\n"
-"napako!\n"
-"\n"
-"Zato se prijavljajte v sistem z uporabni¹kim raèunom, ki ga boste ustvarili\n"
-"tukaj. Kot root se prijavite samo za administracijske in vzdr¾evalne namene."
-
-#: ../../help.pm_.c:636
-msgid ""
-"Creating a boot disk is strongly recommended. If you can't\n"
-"boot your computer, it's the only way to rescue your system without\n"
-"reinstalling it."
-msgstr ""
-
-#: ../../help.pm_.c:641
-msgid ""
-"You need to indicate where you wish\n"
-"to place the information required to boot to GNU/Linux.\n"
-"\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of\n"
-"drive (MBR)\"."
-msgstr ""
-"Izberite kam ¾elite zapisati\n"
-"informacije potrebne za zagon GNU/Linux-a.\n"
-"\n"
-"\n"
-"Razen, èe natanèno veste kaj delate, izberite \"Prvi sektor pogona (MBR)\"."
-
-#: ../../help.pm_.c:649
-msgid ""
-"Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-" (primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-msgstr ""
-"Razen èe specifièno veste drugaèe, je obièajna izbira \"/dev/hda\"\n"
-" (primaren master IDE disk) ali \"/dev/sda\" (prvi SCSI disk)."
-
-#: ../../help.pm_.c:653
-msgid ""
-"LILO (the LInux LOader) and Grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"You may also want not to give access to these other operating systems to\n"
-"anyone, in which case you can delete the corresponding entries. But\n"
-"in this case, you will need a boot disk in order to boot them!"
-msgstr ""
-"LILO (LInux LOader) in Grub sta zagonska nalagalnika. Omogoèata zagon\n"
-"GNU/Linux-a ali kateregakoli drugega operacijskega sistema na va¹em\n"
-"raèunalniku. Ponavadi so drugi operacijski sistemi pravilno prepoznani in\n"
-"name¹èeni. V primeru, da ni tako, lahko tukaj roèno dodate vnos. Pazljivo\n"
-"izberite pravilne parametre."
-
-#: ../../help.pm_.c:665
-#, fuzzy
-msgid ""
-"LILO and grub main options are:\n"
-"  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-"partition) that contains the boot sector. Unless you know specifically\n"
-"otherwise, choose \"/dev/hda\".\n"
-"\n"
-"\n"
-"  - Delay before booting default image: Specifies the number in tenths\n"
-"of a second the boot loader should wait before booting the first image.\n"
-"This is useful on systems that immediately boot from the hard disk after\n"
-"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-"omitted or is set to zero.\n"
-"\n"
-"\n"
-"  - Video mode: This specifies the VGA text mode that should be selected\n"
-"when booting. The following values are available: \n"
-"\n"
-"    * normal: select normal 80x25 text mode.\n"
-"\n"
-"    * <number>:  use the corresponding text mode.\n"
-"\n"
-"\n"
-"  - Clean \"/tmp\" at each boot: if you want delete all files and "
-"directories\n"
-"stored in \"/tmp\" when you boot your system, select this option.\n"
-"\n"
-"\n"
-"  - Precise RAM if needed: unfortunately, there is no standard method to ask "
-"the\n"
-"BIOS about the amount of RAM present in your computer. As consequence, Linux "
-"may\n"
-"fail to detect your amount of RAM correctly. If this is the case, you can\n"
-"specify the correct amount or RAM here. Please note that a difference of 2 "
-"or 4\n"
-"MB between detected memory and memory present in your system is normal."
-msgstr ""
-"Glavne mo¾nosti LILO in Grub so:\n"
-"  - Zagonska naprava: Ime naprave (npr. razdelka na trdem disku\n"
-"ki vsebuje zagonski sektor. Razen, èe specifièno veste drugaèe izberite\n"
-"\"/dev/hda\".\n"
-"\n"
-"\n"
-"  - Pavza pred zagonom prevzete slike: Èas v desetinkah sekunde, ki ga naj\n"
-"zagonski nalagalnik èaka, preden zaène zaganjati prvo sliko.\n"
-"Ta mo¾nost je uporabna za sisteme, ki takoj po prepoznani tipkovnici\n"
-"zaènejo zaganjati sistem. Zagonski nalagalnik ne èaka, èe pavza ni doloèena\n"
-"ali èe je vrednost postavljena na niè.\n"
-"\n"
-"\n"
-"  - Video naèin: Tekstoven naèin VGA, ki naj bo izbran ob zagonu. Na voljo\n"
-"so naslednje vrednosti: \n"
-"    * normal: normalen tekstoven naèin 80x25.\n"
-"    * <¹tevilka>: uporabi ustrezen tekstoven naèin."
-
-#: ../../help.pm_.c:697
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n"
-"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"Yaboot main options are:\n"
-"\n"
-"\n"
-"  - Init Message: A simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-"\n"
-"  - Boot Device: Indicate where you want to place the information required "
-"to \n"
-"boot to GNU/Linux. Generally, you will have setup a bootstrap partition "
-"earlier \n"
-"to hold this information.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: Unlike LILO, there are two delays available with \n"
-"yaboot.  The first delay is measured in seconds and at this point you can \n"
-"choose between CD, OF boot, MacOS, or Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: This timeout is similar to the LILO boot delay.  "
-"After \n"
-"selecting Linux, you will have this delay in 0.1 seconds before your "
-"default\n"
-"kernel description is selected.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: Checking this option will allow you to choose 'C' for "
-"CD at\n"
-"the first boot prompt.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: Checking this option will allow you to choose 'N' for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-"\n"
-"  - Default OS: You can select which OS will boot by default when the Open "
-"Firmware \n"
-"Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:738
-msgid ""
-"You can add additional entries for yaboot, either for other operating "
-"systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"\n"
-"For other OS's - the entry consists only of a label and the root partition.\n"
-"\n"
-"\n"
-"For Linux, there are a few possible options: \n"
-"\n"
-"\n"
-"  - Label: This is simply the name will type at the yaboot prompt to select "
-"this \n"
-"boot option.\n"
-"\n"
-"\n"
-"  - Image: This would be the name of the kernel to boot.  Typically vmlinux "
-"or\n"
-"a variation of vmlinux with an extension.\n"
-"\n"
-"\n"
-"  - Root: The root device or '/' for your Linux installation.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: On Apple hardware, the kernel append option is used quite often "
-"to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button "
-"emulation\n"
-"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The "
-"following \n"
-"are some examples:\n"
-"\n"
-"\n"
-"\t\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: This option can be used either to load initial modules, before "
-"the boot \n"
-"device is available, or to load a ramdisk image for an emergency boot "
-"situation.\n"
-"\n"
-"\n"
-"  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you "
-"should need\n"
-"to allocate a large ramdisk, this option can be used.\n"
-"\n"
-"\n"
-"  - Read-write: Normally the 'root' partition is initially brought up read-"
-"only, to allow\n"
-"a filesystem check before the system becomes 'live'.  You can override this "
-"option here.\n"
-"\n"
-"\n"
-"  - NoVideo: Should the Apple video hardware prove to be exceptionally "
-"problematic, you can\n"
-"select this option to boot in 'novideo' mode, with native framebuffer "
-"support.\n"
-"\n"
-"\n"
-"  - Default: Selects this entry as being the default Linux selection, "
-"selectable by just\n"
-"pressing ENTER at the yaboot prompt.  This entry will also be highlighted "
-"with a '*', if you\n"
-"press TAB to see the boot selections."
-msgstr ""
-
-#: ../../help.pm_.c:793
-msgid ""
-"SILO is a bootloader for SPARC: it is able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"You may also want not to give access to these other operating systems to\n"
-"anyone, in which case you can delete the corresponding entries. But\n"
-"in this case, you will need a boot disk in order to boot them!"
-msgstr ""
-"SILO je SPARC zagonski nalagalnik: omogoèa zagon\n"
-"GNU/Linux-a ali kateregakoli drugega operacijskega sistema na va¹em\n"
-"raèunalniku. Ponavadi so drugi operacijski sistemi pravilno prepoznani in\n"
-"name¹èeni. V primeru, da ni tako, lahko tukaj roèno dodate vnos. Pazljivo\n"
-"izberite pravilne parametre.\n"
-"\n"
-"\n"
-"Lahko drugim tudi prepreèite dostop do ostalih operacijskih sistemov. V\n"
-"tem primeru izbri¹ite odgovarjajoèe vnose, vendar boste za njihov zagon\n"
-"kasneje potrebovali zagonsko disketo!"
-
-#: ../../help.pm_.c:805
-msgid ""
-"SILO main options are:\n"
-"  - Bootloader installation: Indicate where you want to place the\n"
-"information required to boot to GNU/Linux. Unless you know exactly\n"
-"what you are doing, choose \"First sector of drive (MBR)\".\n"
-"\n"
-"\n"
-"  - Delay before booting default image: Specifies the number in tenths\n"
-"of a second the boot loader should wait before booting the first image.\n"
-"This is useful on systems that immediately boot from the hard disk after\n"
-"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-"omitted or is set to zero."
-msgstr ""
-"Glavne mo¾nosti SILO so:\n"
-"  - Namestitev zagonskega nalagalnika: Izberite kam ¾elite zapisati\n"
-"informacije potrebne za zagon GNU/Linux-a. Razen, èe natanèno veste\n"
-"kaj delate, izberite \"Prvi sektor pogona (MBR)\".\n"
-"\n"
-"\n"
-"  - Pavza pred zagonom prevzete slike: Èas v desetinkah sekunde, ki ga naj\n"
-"zagonski nalagalnik èaka, preden zaène zaganjati prvo sliko.\n"
-"Ta mo¾nost je uporabna za sisteme, ki takoj po prepoznani tipkovnici\n"
-"zaènejo zaganjati sistem. Zagonski nalagalnik ne èaka, èe pavza ni doloèena\n"
-"ali èe je vrednost postavljena na niè."
-
-#: ../../help.pm_.c:818
-msgid ""
-"Now it's time to configure the X Window System, which is the\n"
-"core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-"you must configure your video card and monitor. Most of these\n"
-"steps are automated, though, therefore your work may only consist\n"
-"of verifying what has been done and accept the settings :)\n"
-"\n"
-"\n"
-"When the configuration is over, X will be started (unless you\n"
-"ask DrakX not to) so that you can check and see if the\n"
-"settings suit you. If they don't, you can come back and\n"
-"change them, as many times as necessary."
-msgstr ""
-"Sedaj je èas za nastavitev sistema X Windows, ki je jedro grafiènega\n"
-"sistema GNU/Linux. Nastaviti morate grafièno kartico in monitor. Veèina\n"
-"korakov je samodejnih, tako da boste verjetno morali samo preveriti\n"
-"kaj je bilo narejeno in sprejeti nastavitve :)\n"
-"\n"
-"\n"
-"Po konèani nastavitvi, se bo zagnal sistem X (razen, èe niste tega\n"
-"onemogoèili v DrakX), tako da boste lahko preverili èe so vse nastavitve\n"
-"pravilne. Èe nastavitve ne bodo pravilne, jih lahko ponovno spremenite\n"
-"kolikokrat bo paè potrebno."
-
-#: ../../help.pm_.c:831
-msgid ""
-"If something is wrong in X configuration, use these options to correctly\n"
-"configure the X Window System."
-msgstr ""
-"Èe je v nastavitvah sistema X kaj narobe, uporabite te mo¾nosti za pravilno\n"
-"nastavitev sistema X Windows."
-
-#: ../../help.pm_.c:835
-msgid ""
-"If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n"
-"\"No\"."
-msgstr ""
-"Èe bi raj¹i uporabljali grafièno prijavljanje v sistem, izberite \"Da\". "
-"Drugaèe\n"
-"izberite \"Ne\"."
-
-#: ../../help.pm_.c:839
-msgid ""
-"You can choose a security level for your system. Please refer to the manual "
-"for complete\n"
-"  information. Basically, if you don't know what to choose, keep the default "
-"option.\n"
-msgstr ""
-
-#: ../../help.pm_.c:844
-msgid ""
-"Your system is going to reboot.\n"
-"\n"
-"After rebooting, your new Linux Mandrake system will load automatically.\n"
-"If you want to boot into another existing operating system, please read\n"
-"the additional instructions."
-msgstr ""
-"Sistem se bo ponovno zagnal.\n"
-"\n"
-"Po zagonu, se bo samodejno nalo¾il va¹ nov sistem Linux Mandrake.\n"
-"Èe ¾elite zagon drugega operacijskega sistema, preberite dodatna navodila."
-
-#: ../../install2.pm_.c:37
-msgid "Choose your language"
-msgstr "Izberite jezik"
-
-#: ../../install2.pm_.c:38
-msgid "Select installation class"
-msgstr "Izberite razred namestitve"
-
-#: ../../install2.pm_.c:39
-msgid "Hard drive detection"
-msgstr "Prepoznavanje trdega diska"
-
-#: ../../install2.pm_.c:40
-msgid "Configure mouse"
-msgstr "Nastavitev mi¹ke"
-
-#: ../../install2.pm_.c:41
-msgid "Choose your keyboard"
-msgstr "Izberite tipkovnico"
-
-#: ../../install2.pm_.c:42
-msgid "Security"
-msgstr ""
-
-#: ../../install2.pm_.c:43
-msgid "Setup filesystems"
-msgstr "Nastavitev datoteènega sistema"
-
-#: ../../install2.pm_.c:44
-msgid "Format partitions"
-msgstr "Formatiranje razdelkov"
-
-#: ../../install2.pm_.c:45
-msgid "Choose packages to install"
-msgstr "Izberite pakete za namestitev"
-
-#: ../../install2.pm_.c:46
-msgid "Install system"
-msgstr "Namestitev sistema"
-
-#: ../../install2.pm_.c:47 ../../install_steps_interactive.pm_.c:894
-#: ../../install_steps_interactive.pm_.c:895
-msgid "Set root password"
-msgstr "Nastavitev gesla root"
-
-#: ../../install2.pm_.c:48
-msgid "Add a user"
-msgstr "Dodaj uporabnika"
-
-#: ../../install2.pm_.c:49
-msgid "Configure networking"
-msgstr "Nastavitev omre¾ja"
-
-#: ../../install2.pm_.c:51 ../../install_steps_interactive.pm_.c:818
-msgid "Summary"
-msgstr ""
-
-#: ../../install2.pm_.c:52
-msgid "Configure services"
-msgstr "Nastavitev servisov"
-
-#: ../../install2.pm_.c:54
-msgid "Create a bootdisk"
-msgstr "Ustvarjanje zagonske diskete"
-
-#: ../../install2.pm_.c:56
-msgid "Install bootloader"
-msgstr "Namestitev zagonskega nalagalnika"
-
-#: ../../install2.pm_.c:57
-msgid "Configure X"
-msgstr "Nastavitev X"
-
-#: ../../install2.pm_.c:58
-msgid "Exit install"
-msgstr "Izhod iz namestitve"
-
-#: ../../install_any.pm_.c:402
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:433
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:676
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Izberite stre¾nik"
-
-#: ../../install_any.pm_.c:680
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:690
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:712
-msgid "Error reading file $f"
-msgstr "Napaka pri branju datoteke $f"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:310
-#: ../../interactive.pm_.c:99 ../../interactive.pm_.c:114
-#: ../../interactive.pm_.c:269 ../../interactive_newt.pm_.c:166
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:356
-#: ../../my_gtk.pm_.c:617 ../../my_gtk.pm_.c:640
-msgid "Ok"
-msgstr "V redu"
-
-#: ../../install_gtk.pm_.c:423
-msgid "Please test the mouse"
-msgstr "Preizkusite mi¹ko"
-
-#: ../../install_gtk.pm_.c:424 ../../standalone/mousedrake_.c:132
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "Preizkusite mi¹ko"
-
-#: ../../install_gtk.pm_.c:425 ../../standalone/mousedrake_.c:133
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:41
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Potrebujete korenski razdelek.\n"
-"Ustvarite nov razdelek (ali izberite obstojeèega).\n"
-"Nato izberite ``Toèka prikljuèitve'' in jo nastavite na `/'"
-
-#: ../../install_interactive.pm_.c:46 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Potrebujete razdelek swap"
-
-#: ../../install_interactive.pm_.c:47 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nimate razdelka swap\n"
-"\n"
-"Naj vseeno nadaljujem?"
-
-#: ../../install_interactive.pm_.c:68
-msgid "Use free space"
-msgstr "Uporabi razpolo¾ljiv prostor"
-
-#: ../../install_interactive.pm_.c:70
-msgid "Not enough free space to allocate new partitions"
-msgstr "Premalo razpolo¾ljivega prostora za nov razdelek"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Use existing partition"
-msgstr "Uporabi obstojeè razdelek"
-
-#: ../../install_interactive.pm_.c:80
-msgid "There is no existing partition to use"
-msgstr "Na voljno ni nobenega obstojeèega razdelka"
-
-#: ../../install_interactive.pm_.c:87
-msgid "Use the Windows partition for loopback"
-msgstr "Uporabi razdelek Oken (Windows) za loopback"
-
-#: ../../install_interactive.pm_.c:90
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kateri razdelek ¾elite uporabiti za Linux4Win?"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Choose the sizes"
-msgstr "Izberite velikosti"
-
-#: ../../install_interactive.pm_.c:93
-msgid "Root partition size in MB: "
-msgstr "Velikost korenskega razdelka v MB: "
-
-#: ../../install_interactive.pm_.c:94
-msgid "Swap partition size in MB: "
-msgstr "Velikost razdelka swap v MB: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Use the free space on the Windows partition"
-msgstr "Uporabi razpolo¾ljiv prostor v razdelku Oken (Windows)"
-
-#: ../../install_interactive.pm_.c:105
-msgid "Which partition do you want to resize?"
-msgstr "Kateremu razdeleku ¾elite spremeniti velikost?"
-
-#: ../../install_interactive.pm_.c:107
-msgid "Computing Windows filesystem bounds"
-msgstr "Raèunanje mej datoteènega sistema Oken (Windows)"
-
-#: ../../install_interactive.pm_.c:110
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Spreminjalec velikosti FAT ne deluje na va¹em razdelku, \n"
-"pri¹lo je do naslednje napake: %s"
-
-#: ../../install_interactive.pm_.c:113
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Va¹ razdelek Oken (Windows) je preveè fragmentiran. Najprej po¾enite "
-"``defrag''"
-
-#: ../../install_interactive.pm_.c:114
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"OPOZORILO!\n"
-"\n"
-"DrakX bo sedaj spremenil velikost razdelku Oken (Windows). Bodite previdni:\n"
-"ta operacija je nevarna. Èe tega ¹e niste opravili, konèajte namestitev in\n"
-"za¾enite scandisk pod Okni (èe ¾elite po¾enite ¹e defrag), nato ponovno\n"
-"za¾enite namestitev. Naredite tudi varnostno kopijo podatkov.\n"
-"Èe ste preprièani, pritisnite \"V redu\"."
-
-#: ../../install_interactive.pm_.c:123
-msgid "Which size do you want to keep for windows on"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:124
-#, c-format
-msgid "partition %s"
-msgstr "razdelek %s"
-
-#: ../../install_interactive.pm_.c:130
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Spreminjanje velikosti FAT neuspe¹no: %s"
-
-#: ../../install_interactive.pm_.c:145
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ni veè razdelkov FAT za spremembo velikosti ali uporabo kot loopback\n"
-"(ali premalo prostora)"
-
-#: ../../install_interactive.pm_.c:151
-msgid "Erase entire disk"
-msgstr "Brisanje celotnega diska"
-
-#: ../../install_interactive.pm_.c:151
-msgid "Remove Windows(TM)"
-msgstr "Odstranjevanje Oken(TM)"
-
-#: ../../install_interactive.pm_.c:154
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Imate veè kot en trdi disk, na katerega ¾elite namestiti Linux?"
-
-#: ../../install_interactive.pm_.c:157
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "VSI razdelki in podatki na disku %s bodo izgubljeni"
-
-#: ../../install_interactive.pm_.c:165
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "Uporabi obstojeè razdelek"
-
-#: ../../install_interactive.pm_.c:169
-msgid "Use fdisk"
-msgstr "Uporabi fdisk"
-
-#: ../../install_interactive.pm_.c:172
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Sedej lahko ustvarjate/spreminjate razdelke na %s.\n"
-"Po konèanem delu ne pozabite shraniti sprememb z ukazom `w'"
-
-#: ../../install_interactive.pm_.c:201
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Uporabi razpolo¾ljiv prostor v razdelku Oken (Windows)"
-
-#: ../../install_interactive.pm_.c:217
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Razdelkov ni veè mogoèe dodati"
-
-#: ../../install_interactive.pm_.c:221
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX-ov èarovnik za razdelke je najdel naslednje re¹itve:"
-
-#: ../../install_interactive.pm_.c:226
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:232
-msgid "Bringing up the network"
-msgstr "Vklop omre¾ja"
-
-#: ../../install_interactive.pm_.c:237
-msgid "Bringing down the network"
-msgstr "Izklop omre¾ja"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Pri¹lo je do napake, ki je sistem ne zna obdelati na lep naèin.\n"
-"Nadaljujte na svojo odgovornost."
-
-#: ../../install_steps.pm_.c:203
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Podvojena toèka priklopa %s"
-
-#: ../../install_steps.pm_.c:385
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Nekateri pomembni paketi niso bili ustrezno name¹èeni.\n"
-"Verjetno imate povarjen CD medij ali pogon CD-ROM.\n"
-"Preverite medij na raèunlaniku z Linux-om z uporabo ukaza \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:451
-#, c-format
-msgid "Welcome to %s"
-msgstr "Pozdravljeni v %s"
-
-#: ../../install_steps.pm_.c:634
-msgid "No floppy drive available"
-msgstr "Na voljno ni nobenega disketnega pogona"
-
-#: ../../install_steps_auto_install.pm_.c:51
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Vstop v korak `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Izberite velikost, ki jo ¾elite namestiti"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Celotna velikost: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:437
-#, c-format
-msgid "Version: %s\n"
-msgstr "Razlièica: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:438
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Velikost: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:337
-#: ../../install_steps_interactive.pm_.c:520
-msgid "Choose the packages you want to install"
-msgstr "Izberite pakete, ki jih ¾elite namestiti"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../install_steps_gtk.pm_.c:340
-msgid "Info"
-msgstr "Informacije"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:345
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install"
-msgstr "Namestiti"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:558
-#: ../../install_steps_interactive.pm_.c:675
-msgid "Installing"
-msgstr "Name¹èanje"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Prosim poèakajte, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:570
-msgid "Time remaining "
-msgstr "Preostal èas "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Skupen èas"
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:675
-msgid "Preparing installation"
-msgstr "Priprava namestitbe"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:618
-#, c-format
-msgid "Installing package %s"
-msgstr "Name¹èanje paketa %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:695
-#: ../../install_steps_gtk.pm_.c:699
-msgid "Go on anyway?"
-msgstr "Naj vseeno nadaljujem?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:695
-msgid "There was an error ordering packages:"
-msgstr ""
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Naj uporabim ¾e obstojeèo nastavitev X11?"
-
-#: ../../install_steps_gtk.pm_.c:142
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Linux-Mandrake. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:156
-msgid "Please, choose one of the following classes of installation:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:222
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:224
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:229
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:235
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:237
-#, fuzzy
-msgid "Percentage of packages to install"
-msgstr "Izberite kartico"
-
-#: ../../install_steps_gtk.pm_.c:285 ../../install_steps_interactive.pm_.c:599
-msgid "Package Group Selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:305 ../../install_steps_interactive.pm_.c:614
-msgid "Individual package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:349
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "Expand Tree"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "Collapse Tree"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:418
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "Bad package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:436
-#, c-format
-msgid "Name: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:439
-#, c-format
-msgid "Importance: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:448 ../../install_steps_interactive.pm_.c:578
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:471
-#, fuzzy
-msgid "The following packages are going to be installed"
-msgstr "Izberite kartico"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "The following packages are going to be removed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:482
-msgid "You can't select/unselect this package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:501
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:507
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:510
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:563
-#, fuzzy
-msgid "Estimating"
-msgstr "Zaganjam X"
-
-#: ../../install_steps_gtk.pm_.c:582
-#, fuzzy
-msgid "Please wait, preparing installation"
-msgstr "Priprava namestitbe"
-
-#: ../../install_steps_gtk.pm_.c:613
-#, c-format
-msgid "%d packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:652
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:680 ../../install_steps_interactive.pm_.c:163
-msgid "Accept"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:680 ../../install_steps_interactive.pm_.c:163
-#, fuzzy
-msgid "Refuse"
-msgstr "Spremeni velikost"
-
-#: ../../install_steps_gtk.pm_.c:681
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:699
-msgid "There was an error installing packages:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:55
-#, fuzzy
-msgid "Please, choose a language to use."
-msgstr "Ali ¾elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../install_steps_interactive.pm_.c:56
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:68
-#: ../../install_steps_interactive.pm_.c:613
-msgid "All"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:86
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:87
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Linux-"
-"Mandrake distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Linux-Mandrake distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Linux-Mandrake sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:182
-#: ../../install_steps_interactive.pm_.c:822
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:183
-#: ../../standalone/keyboarddrake_.c:29
-#, fuzzy
-msgid "Please, choose your keyboard layout."
-msgstr "Izberite kartico"
-
-#: ../../install_steps_interactive.pm_.c:184
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:201
-msgid "Install Class"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:201
-#, fuzzy
-msgid "Which installation class do you want?"
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../install_steps_interactive.pm_.c:203
-#, fuzzy
-msgid "Install/Update"
-msgstr "Namestiti"
-
-#: ../../install_steps_interactive.pm_.c:203
-msgid "Is this an install or an update?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Recommended"
-msgstr "Priporoèeno"
-
-#: ../../install_steps_interactive.pm_.c:215
-#: ../../install_steps_interactive.pm_.c:218
-msgid "Expert"
-msgstr "Napredno"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Update"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:238 ../../standalone/mousedrake_.c:41
-#, fuzzy
-msgid "Please, choose the type of your mouse."
-msgstr "Ali ¾elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../install_steps_interactive.pm_.c:244 ../../standalone/mousedrake_.c:57
-msgid "Mouse Port"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:245 ../../standalone/mousedrake_.c:58
-#, fuzzy
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../install_steps_interactive.pm_.c:253
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:255
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:256
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:275
-msgid "Configuring PCMCIA cards..."
-msgstr "Nastavitev kartic PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:275
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:280
-#, fuzzy
-msgid "Configuring IDE"
-msgstr "Nastavitev zaslona"
-
-#: ../../install_steps_interactive.pm_.c:280
-msgid "IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:295
-#, fuzzy
-msgid "no available partitions"
-msgstr "Zaganjam X"
-
-#: ../../install_steps_interactive.pm_.c:298
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:306
-#, fuzzy
-msgid "Choose the mount points"
-msgstr "Ali ¾elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../install_steps_interactive.pm_.c:323
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:336
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:361
-#, fuzzy
-msgid "Root Partition"
-msgstr "Zaganjam X"
-
-#: ../../install_steps_interactive.pm_.c:362
-#, fuzzy
-msgid "What is the root partition (/) of your system?"
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../install_steps_interactive.pm_.c:376
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:403
-#, fuzzy
-msgid "Choose the partitions you want to format"
-msgstr "Ali ¾elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../install_steps_interactive.pm_.c:404
-msgid "Check bad blocks?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:427
-#, fuzzy
-msgid "Formatting partitions"
-msgstr "Zaganjam X"
-
-#: ../../install_steps_interactive.pm_.c:429
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:432
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:438
-msgid "Looking for available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:444
-msgid "Finding packages to upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:461
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:480
-#, fuzzy, c-format
-msgid "Complete (%dMB)"
-msgstr "Obièajni DAC"
-
-#: ../../install_steps_interactive.pm_.c:480
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:480
-#, fuzzy, c-format
-msgid "Recommended (%dMB)"
-msgstr "Obièajni DAC"
-
-#: ../../install_steps_interactive.pm_.c:486
-#, fuzzy
-msgid "Custom"
-msgstr "Prilagojeno"
-
-#: ../../install_steps_interactive.pm_.c:585
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:650
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:655
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:684
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:693
-#, fuzzy
-msgid "Post-install configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../install_steps_interactive.pm_.c:718
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid "Choose a mirror from which to get the packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:761
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:764
-#, fuzzy
-msgid "Please choose the packages you want to install."
-msgstr "Izberite kartico"
-
-#: ../../install_steps_interactive.pm_.c:776
-#, fuzzy
-msgid "Which is your timezone?"
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../install_steps_interactive.pm_.c:778
-msgid "Is your hardware clock set to GMT?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:806 ../../printer.pm_.c:22
-#: ../../printerdrake.pm_.c:415
-msgid "Remote CUPS server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:807
-#, fuzzy
-msgid "No printer"
-msgstr "Odstrani vnos"
-
-#: ../../install_steps_interactive.pm_.c:821
-#, fuzzy
-msgid "Mouse"
-msgstr "Premakni"
-
-#: ../../install_steps_interactive.pm_.c:823
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:824 ../../printerdrake.pm_.c:344
-#, fuzzy
-msgid "Printer"
-msgstr "Izberite stre¾nik"
-
-#: ../../install_steps_interactive.pm_.c:826
-msgid "ISDN card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:829
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:832
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:862
-#, fuzzy
-msgid "Which printing system do you want to use?"
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../install_steps_interactive.pm_.c:896
-msgid "No password"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:901
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:907
-msgid "Use NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:907
-msgid "yellow pages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:914
-msgid "Authentification NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:915
-msgid "NIS Domain"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:916
-#, fuzzy
-msgid "NIS Server"
-msgstr "Izberite stre¾nik"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:967
-#, fuzzy
-msgid "First floppy drive"
-msgstr "Izberite stre¾nik"
-
-#: ../../install_steps_interactive.pm_.c:968
-#, fuzzy
-msgid "Second floppy drive"
-msgstr "Izberite stre¾nik"
-
-#: ../../install_steps_interactive.pm_.c:969
-msgid "Skip"
-msgstr "Preskok"
-
-#: ../../install_steps_interactive.pm_.c:974
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:983
-#, fuzzy
-msgid "Sorry, no floppy drive available"
-msgstr "Izberite stre¾nik"
-
-#: ../../install_steps_interactive.pm_.c:987
-#, fuzzy
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Ali ¾elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../install_steps_interactive.pm_.c:991
-#, fuzzy, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Izberite stre¾nik"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid "Creating bootdisk"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1001
-msgid "Preparing bootloader"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1010
-#, fuzzy
-msgid "Do you want to use aboot?"
-msgstr "Ali ¾elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../install_steps_interactive.pm_.c:1013
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1038 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1039 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1040 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1044 ../../standalone/draksec_.c:49
-msgid "Choose security level"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1080
-msgid "Do you want to generate an auto install floppy for linux replication?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1082
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "Creating auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1156
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1167
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Linux-"
-"Mandrake,\n"
-"consult the Errata available from http://www.linux-mandrake.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Linux-Mandrake User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Generate auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1181
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1186
-#, fuzzy
-msgid "Automated"
-msgstr "Prilagojeno"
-
-#: ../../install_steps_interactive.pm_.c:1186
-#, fuzzy
-msgid "Replay"
-msgstr "Nalo¾i ponovno"
-
-#: ../../install_steps_interactive.pm_.c:1189
-msgid "Save packages selection"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Linux-Mandrake Installation %s"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:33
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-
-#: ../../interactive.pm_.c:65
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:267
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:290
-msgid "Please wait"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr ""
-
-#: ../../keyboard.pm_.c:124 ../../keyboard.pm_.c:155
-msgid "Czech (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:125 ../../keyboard.pm_.c:138 ../../keyboard.pm_.c:158
-msgid "German"
-msgstr ""
-
-#: ../../keyboard.pm_.c:126
-msgid "Dvorak"
-msgstr ""
-
-#: ../../keyboard.pm_.c:127 ../../keyboard.pm_.c:164
-msgid "Spanish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:128 ../../keyboard.pm_.c:165
-msgid "Finnish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:129 ../../keyboard.pm_.c:139 ../../keyboard.pm_.c:166
-msgid "French"
-msgstr ""
-
-#: ../../keyboard.pm_.c:130 ../../keyboard.pm_.c:187
-msgid "Norwegian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:131
-msgid "Polish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:132 ../../keyboard.pm_.c:192
-msgid "Russian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:133 ../../keyboard.pm_.c:203
-msgid "UK keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:134 ../../keyboard.pm_.c:137 ../../keyboard.pm_.c:204
-msgid "US keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:141
-msgid "Armenian (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:142
-msgid "Armenian (typewriter)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:143
-msgid "Armenian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:147
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:148
-msgid "Azerbaidjani (cyrillic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:149
-msgid "Belgian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:150
-msgid "Bulgarian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:151
-msgid "Brazilian (ABNT-2)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:152
-msgid "Belarusian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:153
-msgid "Swiss (German layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:154
-msgid "Swiss (French layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:156
-msgid "Czech (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:157
-msgid "Czech (Programmers)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:159
-msgid "German (no dead keys)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:160
-msgid "Danish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:161
-msgid "Dvorak (US)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:162
-msgid "Dvorak (Norwegian)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:163
-msgid "Estonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:167
-msgid "Georgian (\"Russian\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:168
-msgid "Georgian (\"Latin\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:169
-msgid "Greek"
-msgstr ""
-
-#: ../../keyboard.pm_.c:170
-msgid "Hungarian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:171
-msgid "Croatian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:172
-msgid "Israeli"
-msgstr ""
-
-#: ../../keyboard.pm_.c:173
-msgid "Israeli (Phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174
-msgid "Iranian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:175
-msgid "Icelandic"
-msgstr ""
-
-#: ../../keyboard.pm_.c:176
-msgid "Italian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:177
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:178
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Izberite tipkovnico"
-
-#: ../../keyboard.pm_.c:179
-msgid "Latin American"
-msgstr ""
-
-#: ../../keyboard.pm_.c:180
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:181
-msgid "Dutch"
-msgstr ""
-
-#: ../../keyboard.pm_.c:182
-msgid "Lithuanian AZERTY (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:184
-msgid "Lithuanian AZERTY (new)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:185
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:186
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:188
-msgid "Polish (qwerty layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:189
-msgid "Polish (qwertz layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:190
-msgid "Portuguese"
-msgstr ""
-
-#: ../../keyboard.pm_.c:191
-msgid "Canadian (Quebec)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:193
-msgid "Russian (Yawerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:194
-msgid "Swedish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:195
-msgid "Slovenian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:196
-msgid "Slovakian (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:197
-msgid "Slovakian (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198
-msgid "Slovakian (Programmers)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:199
-msgid "Thai keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:200
-msgid "Turkish (traditional \"F\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:201
-msgid "Turkish (modern \"Q\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:202
-msgid "Ukrainian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:205
-msgid "US keyboard (international)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:206
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:207
-msgid "Yugoslavian (latin/cyrillic)"
-msgstr ""
-
-#: ../../lvm.pm_.c:70
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr ""
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr ""
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr ""
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Splo¹no"
-
-#: ../../mouse.pm_.c:45
-#, fuzzy
-msgid "Wheel"
-msgstr "stopnja"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr ""
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr ""
-
-#: ../../mouse.pm_.c:54
-#, fuzzy
-msgid "Mouse Systems"
-msgstr "Tip mi¹ke: %s\n"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr ""
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr ""
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr ""
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "niè"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:356
-msgid "Finish"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:356
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:357
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:617
-msgid "Is this correct?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:143
-#, fuzzy
-msgid "Internet configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../netconnect.pm_.c:144
-#, fuzzy
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Xconfigurator bo zdaj zagnal X in preveril nastavitve."
-
-#: ../../netconnect.pm_.c:148
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "Nastavitev RAMDAC"
-
-#: ../../netconnect.pm_.c:154 ../../standalone/draknet_.c:196
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#: ../../netconnect.pm_.c:155
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../netconnect.pm_.c:156 ../../standalone/draknet_.c:196
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr "Nastavitev zaslona"
-
-#: ../../netconnect.pm_.c:161 ../../netconnect.pm_.c:904
-#: ../../netconnect.pm_.c:934 ../../netconnect.pm_.c:1012
-#, fuzzy
-msgid "Network Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../netconnect.pm_.c:222 ../../netconnect.pm_.c:266
-#: ../../netconnect.pm_.c:276 ../../netconnect.pm_.c:283
-#: ../../netconnect.pm_.c:293
-#, fuzzy
-msgid "ISDN Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../netconnect.pm_.c:222
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../netconnect.pm_.c:236
-#, fuzzy
-msgid "Connection Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../netconnect.pm_.c:237
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../netconnect.pm_.c:239 ../../standalone/draknet_.c:552
-msgid "Card IRQ"
-msgstr ""
-
-#: ../../netconnect.pm_.c:240 ../../standalone/draknet_.c:553
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:241 ../../standalone/draknet_.c:554
-msgid "Card IO"
-msgstr ""
-
-#: ../../netconnect.pm_.c:242 ../../standalone/draknet_.c:555
-msgid "Card IO_0"
-msgstr ""
-
-#: ../../netconnect.pm_.c:243 ../../standalone/draknet_.c:556
-msgid "Card IO_1"
-msgstr ""
-
-#: ../../netconnect.pm_.c:244 ../../standalone/draknet_.c:557
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../netconnect.pm_.c:245 ../../standalone/draknet_.c:558
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:246 ../../standalone/draknet_.c:559
-msgid "Provider phone number"
-msgstr ""
-
-#: ../../netconnect.pm_.c:247
-msgid "Provider dns 1"
-msgstr ""
-
-#: ../../netconnect.pm_.c:248
-msgid "Provider dns 2"
-msgstr ""
-
-#: ../../netconnect.pm_.c:249 ../../standalone/draknet_.c:564
-msgid "Dialing mode"
-msgstr ""
-
-#: ../../netconnect.pm_.c:250 ../../standalone/draknet_.c:562
-msgid "Account Login (user name)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:251 ../../standalone/draknet_.c:563
-msgid "Account Password"
-msgstr ""
-
-#: ../../netconnect.pm_.c:261
-msgid "Europe"
-msgstr ""
-
-#: ../../netconnect.pm_.c:261
-msgid "Europe (EDSS1)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:263
-#, fuzzy
-msgid "Rest of the world"
-msgstr "Preizkus nastavitev"
-
-#: ../../netconnect.pm_.c:263
-msgid ""
-"Rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../netconnect.pm_.c:267
-#, fuzzy
-msgid "Which protocol do you want to use ?"
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../netconnect.pm_.c:277
-msgid "What kind of card do you have?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:278
-msgid "I don't know"
-msgstr ""
-
-#: ../../netconnect.pm_.c:278
-msgid "ISA / PCMCIA"
-msgstr ""
-
-#: ../../netconnect.pm_.c:278
-msgid "PCI"
-msgstr ""
-
-#: ../../netconnect.pm_.c:284
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:288
-msgid "Abort"
-msgstr ""
-
-#: ../../netconnect.pm_.c:288
-msgid "Continue"
-msgstr ""
-
-#: ../../netconnect.pm_.c:294
-#, fuzzy
-msgid "Which is your ISDN card ?"
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../netconnect.pm_.c:314
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../netconnect.pm_.c:323
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../netconnect.pm_.c:371
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../netconnect.pm_.c:375 ../../standalone/drakgw_.c:232
-#, fuzzy
-msgid "Choose the network interface"
-msgstr "Izberite kartico"
-
-#: ../../netconnect.pm_.c:376
-#, fuzzy
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../netconnect.pm_.c:385 ../../netconnect.pm_.c:700
-#: ../../netconnect.pm_.c:845 ../../standalone/drakgw_.c:223
-msgid "Network interface"
-msgstr ""
-
-#: ../../netconnect.pm_.c:386
-msgid ""
-"\n"
-"Do you agree?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:386
-#, fuzzy
-msgid "I'm about to restart the network device:\n"
-msgstr "®elite preizkusiti nastavitev?"
-
-#: ../../netconnect.pm_.c:484
-#, fuzzy
-msgid "ADSL configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../netconnect.pm_.c:485
-#, fuzzy
-msgid "Do you want to start your connection at boot?"
-msgstr "Ali ¾elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../netconnect.pm_.c:620
-#, fuzzy
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../netconnect.pm_.c:625
-#, fuzzy
-msgid "Dialup options"
-msgstr "Izberite stre¾nik"
-
-#: ../../netconnect.pm_.c:626 ../../standalone/draknet_.c:566
-#, fuzzy
-msgid "Connection name"
-msgstr "Nastavitev zaslona"
-
-#: ../../netconnect.pm_.c:627 ../../standalone/draknet_.c:567
-msgid "Phone number"
-msgstr ""
-
-#: ../../netconnect.pm_.c:628 ../../standalone/draknet_.c:568
-#, fuzzy
-msgid "Login ID"
-msgstr "Nastavitev zaslona"
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Authentication"
-msgstr ""
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "PAP"
-msgstr ""
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Script-based"
-msgstr ""
-
-#: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570
-msgid "Terminal-based"
-msgstr ""
-
-#: ../../netconnect.pm_.c:631 ../../standalone/draknet_.c:571
-msgid "Domain name"
-msgstr ""
-
-#: ../../netconnect.pm_.c:632 ../../standalone/draknet_.c:572
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Izberite stre¾nik"
-
-#: ../../netconnect.pm_.c:633 ../../standalone/draknet_.c:573
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Izberite stre¾nik"
-
-#: ../../netconnect.pm_.c:701
-msgid ""
-"I'm about to restart the network device $netc->{NET_DEVICE}. Do you agree?"
-msgstr ""
-
-#: ../../netconnect.pm_.c:745
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../netconnect.pm_.c:745 ../../netconnect.pm_.c:748
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Nastavitev RAMDAC"
-
-#: ../../netconnect.pm_.c:745
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#: ../../netconnect.pm_.c:748
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr "Nastavitev zaslona"
-
-#: ../../netconnect.pm_.c:748
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#: ../../netconnect.pm_.c:752 ../../standalone/net_monitor_.c:81
-#, fuzzy
-msgid "Connect to Internet"
-msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#: ../../netconnect.pm_.c:754
-#, fuzzy
-msgid "Disconnect from Internet"
-msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#: ../../netconnect.pm_.c:756
-#, fuzzy
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Nastavitev RAMDAC"
-
-#: ../../netconnect.pm_.c:759
-#, fuzzy
-msgid "Internet connection & configuration"
-msgstr "Izberite stre¾nik"
-
-#: ../../netconnect.pm_.c:811 ../../netconnect.pm_.c:961
-#: ../../netconnect.pm_.c:971 ../../netconnect.pm_.c:986
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "Nastavitev zaslona"
-
-#: ../../netconnect.pm_.c:812
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "Napredni naèin"
-
-#: ../../netconnect.pm_.c:812
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../netconnect.pm_.c:812
-#, fuzzy
-msgid "What kind is your ISDN connection?"
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../netconnect.pm_.c:833 ../../netconnect.pm_.c:882
-#, fuzzy
-msgid "Connect to the Internet"
-msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#: ../../netconnect.pm_.c:834
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../netconnect.pm_.c:836
-msgid "use dhcp"
-msgstr ""
-
-#: ../../netconnect.pm_.c:836
-msgid "use pppoe"
-msgstr ""
-
-#: ../../netconnect.pm_.c:836
-msgid "use pptp"
-msgstr ""
-
-#: ../../netconnect.pm_.c:846
-#, fuzzy, c-format
-msgid "I'm about to restart the network device %s. Do you agree?"
-msgstr "®elite preizkusiti nastavitev?"
-
-#: ../../netconnect.pm_.c:883
-#, fuzzy
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../netconnect.pm_.c:900
-#, fuzzy
-msgid "Network configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../netconnect.pm_.c:901
-#, fuzzy
-msgid "Do you want to restart the network"
-msgstr "®elite preizkusiti nastavitev?"
-
-#: ../../netconnect.pm_.c:904
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "®elite preizkusiti nastavitev?"
-
-#: ../../netconnect.pm_.c:935
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:962
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../netconnect.pm_.c:964
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Izberite privzetega uporabnika:"
-
-#: ../../netconnect.pm_.c:965
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../netconnect.pm_.c:971 ../../printerdrake.pm_.c:19
-msgid "Detecting devices..."
-msgstr ""
-
-#: ../../netconnect.pm_.c:978
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "Nastavitev RAMDAC"
-
-#: ../../netconnect.pm_.c:978
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Podvojena toèka priklopa %s"
-
-#: ../../netconnect.pm_.c:979
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Izberite stre¾nik"
-
-#: ../../netconnect.pm_.c:979
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../netconnect.pm_.c:980
-#, fuzzy
-msgid "DSL (or ADSL) connection"
-msgstr "Nastavitev RAMDAC"
-
-#: ../../netconnect.pm_.c:980
-#, c-format
-msgid "detected on interface %s"
-msgstr ""
-
-#: ../../netconnect.pm_.c:981
-#, fuzzy
-msgid "Cable connection"
-msgstr "Izberite stre¾nik"
-
-#: ../../netconnect.pm_.c:982
-#, fuzzy
-msgid "LAN connection"
-msgstr "Izberite stre¾nik"
-
-#: ../../netconnect.pm_.c:982
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../netconnect.pm_.c:987
-#, fuzzy
-msgid "How do you want to connect to the Internet?"
-msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#: ../../netconnect.pm_.c:1004
-msgid ""
-"Congratulation, The network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system."
-msgstr ""
-
-#: ../../netconnect.pm_.c:1007
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-
-#: ../../network.pm_.c:253
-msgid "no network card found"
-msgstr ""
-
-#: ../../network.pm_.c:277 ../../network.pm_.c:387
-#, fuzzy
-msgid "Configuring network"
-msgstr "Nastavitev zaslona"
-
-#: ../../network.pm_.c:278
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-
-#: ../../network.pm_.c:282 ../../network.pm_.c:392
-msgid "Host name"
-msgstr ""
-
-#: ../../network.pm_.c:319
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network.pm_.c:324
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-
-#: ../../network.pm_.c:333 ../../network.pm_.c:334
-#, fuzzy, c-format
-msgid "Configuring network device %s"
-msgstr "Nastavitev RAMDAC"
-
-#: ../../network.pm_.c:334
-msgid " (driver $module)"
-msgstr ""
-
-#: ../../network.pm_.c:336 ../../standalone/draknet_.c:231
-#: ../../standalone/draknet_.c:427
-msgid "IP address"
-msgstr ""
-
-#: ../../network.pm_.c:337 ../../standalone/draknet_.c:428
-msgid "Netmask"
-msgstr ""
-
-#: ../../network.pm_.c:338
-msgid "(bootp/dhcp)"
-msgstr ""
-
-#: ../../network.pm_.c:338
-#, fuzzy
-msgid "Automatic IP"
-msgstr "Prilagojeno"
-
-#: ../../network.pm_.c:359 ../../printerdrake.pm_.c:102
-#: ../../printerdrake.pm_.c:425
-msgid "IP address should be in format 1.2.3.4"
-msgstr ""
-
-#: ../../network.pm_.c:388
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-
-#: ../../network.pm_.c:393
-#, fuzzy
-msgid "DNS server"
-msgstr "Izberite stre¾nik"
-
-#: ../../network.pm_.c:394 ../../standalone/draknet_.c:565
-msgid "Gateway"
-msgstr ""
-
-#: ../../network.pm_.c:396
-#, fuzzy
-msgid "Gateway device"
-msgstr "Zagonska naprava"
-
-#: ../../network.pm_.c:407
-#, fuzzy
-msgid "Proxies configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../network.pm_.c:408
-msgid "HTTP proxy"
-msgstr ""
-
-#: ../../network.pm_.c:409
-msgid "FTP proxy"
-msgstr ""
-
-#: ../../network.pm_.c:412
-msgid "Proxy should be http://..."
-msgstr ""
-
-#: ../../network.pm_.c:413
-msgid "Proxy should be ftp://..."
-msgstr ""
-
-#: ../../partition_table.pm_.c:563
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:581
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-
-#: ../../partition_table.pm_.c:675
-#, c-format
-msgid "Error reading file %s"
-msgstr ""
-
-#: ../../partition_table.pm_.c:682
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr ""
-
-#: ../../partition_table.pm_.c:684
-msgid "Bad backup file"
-msgstr ""
-
-#: ../../partition_table.pm_.c:706
-#, c-format
-msgid "Error writing to file %s"
-msgstr ""
-
-#: ../../partition_table_raw.pm_.c:161
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr ""
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr ""
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:27
-#, fuzzy
-msgid "nice"
-msgstr "Preklic"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr ""
-
-#: ../../printer.pm_.c:20
-msgid "Local printer"
-msgstr ""
-
-#: ../../printer.pm_.c:21
-#, fuzzy
-msgid "Remote printer"
-msgstr "Odstrani vnos"
-
-#: ../../printer.pm_.c:23
-msgid "Remote lpd server"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-#, fuzzy
-msgid "Network printer (socket)"
-msgstr "Izberite stre¾nik"
-
-#: ../../printer.pm_.c:25
-msgid "SMB/Windows 95/98/NT"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "NetWare"
-msgstr ""
-
-#: ../../printer.pm_.c:27 ../../printerdrake.pm_.c:158
-#: ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Printer Device URI"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:19
-msgid "Test ports"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:40
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:52
-msgid "Local Printer Device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:53
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:55
-#, fuzzy
-msgid "Printer Device"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:74
-msgid "Remote lpd Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:75
-msgid ""
-"To use a remote lpd print queue, you need to supply\n"
-"the hostname of the printer server and the queue name\n"
-"on that server which jobs should be placed in."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:78
-msgid "Remote hostname"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:79
-msgid "Remote queue"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:88
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:89
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:94
-#, fuzzy
-msgid "SMB server host"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:95
-#, fuzzy
-msgid "SMB server IP"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:96
-msgid "Share name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:99
-msgid "Workgroup"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124
-msgid "NetWare Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:125
-msgid ""
-"To print to a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "Printer Server"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:130
-msgid "Print Queue Name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:142
-#, fuzzy
-msgid "Socket Printer Options"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:143
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"hostname of the printer and optionally the port number."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:145
-#, fuzzy
-msgid "Printer Hostname"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:146 ../../printerdrake.pm_.c:422
-#, fuzzy
-msgid "Port"
-msgstr "Formatiraj"
-
-#: ../../printerdrake.pm_.c:159
-msgid "You can specify directly the URI to access the printer with CUPS."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:192 ../../printerdrake.pm_.c:244
-msgid "What type of printer do you have?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:204 ../../printerdrake.pm_.c:305
-#, fuzzy
-msgid "Do you want to test printing?"
-msgstr "Xconfigurator bo zdaj zagnal X in preveril nastavitve."
-
-#: ../../printerdrake.pm_.c:207 ../../printerdrake.pm_.c:316
-msgid "Printing test page(s)..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:214 ../../printerdrake.pm_.c:324
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer daemon.\n"
-"This may take a little time before printer start.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-"Does it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:218 ../../printerdrake.pm_.c:328
-msgid ""
-"Test page(s) have been sent to the printer daemon.\n"
-"This may take a little time before printer start.\n"
-"Does it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:234
-msgid "Yes, print ASCII test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:235
-msgid "Yes, print PostScript test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:236
-msgid "Yes, print both test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:243
-msgid "Configure Printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:273
-#, fuzzy
-msgid "Printer options"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:274
-msgid "Paper Size"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:275
-msgid "Eject page after job?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:280
-msgid "Uniprint driver options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:281
-msgid "Color depth options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:283
-msgid "Print text as PostScript?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:285
-msgid "Fix stair-stepping text?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:287
-msgid "Number of pages per output pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:288
-msgid "Right/Left margins in points (1/72 of inch)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:289
-msgid "Top/Bottom margins in points (1/72 of inch)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:291
-msgid "Extra GhostScript options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:293
-msgid "Extra Text options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:295
-msgid "Reverse page order"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:345
-msgid "Would you like to configure a printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:351
-msgid ""
-"Here are the following print queues.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:370
-#, fuzzy
-msgid "CUPS starting"
-msgstr "Zaganjam X"
-
-#: ../../printerdrake.pm_.c:370
-msgid "Reading CUPS drivers database..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:384 ../../printerdrake.pm_.c:450
-#: ../../printerdrake.pm_.c:471 ../../printerdrake.pm_.c:479
-msgid "Select Printer Connection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:385 ../../printerdrake.pm_.c:472
-msgid "How is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:392
-#, fuzzy
-msgid "Select Remote Printer Connection"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"With a remote CUPS server, you do not have to configure\n"
-"any printer here; printers will be automatically detected.\n"
-"In case of doubt, select \"Remote CUPS server\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-"With a remote CUPS server, you do not have to configure\n"
-"any printer here; printers will be automatically detected\n"
-"unless you have a server on a different network; in the\n"
-"latter case, you have to give the CUPS server IP address\n"
-"and optionally the port number."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:429
-msgid "Port number should be numeric"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:451 ../../printerdrake.pm_.c:480
-msgid "Remove queue"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:454
-msgid ""
-"Name of printer should contains only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:461
-msgid ""
-"Every printer need a name (for example lp).\n"
-"Other parameters such as the description of the printer or its location\n"
-"can be defined. What name should be used for this printer and\n"
-"how is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:465
-msgid "Name of printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Description"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:467
-msgid "Location"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-msgid ""
-"Every print queue (which print jobs are directed to) needs a\n"
-"name (often lp) and a spool directory associated with it. What\n"
-"name and directory should be used for this queue and how is the printer "
-"connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:489
-msgid "Name of queue"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:490
-msgid "Spool directory"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:491
-#, fuzzy
-msgid "Printer Connection"
-msgstr "Izberite stre¾nik"
-
-#: ../../raid.pm_.c:33
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-
-#: ../../raid.pm_.c:103
-msgid "Can't write file $file"
-msgstr ""
-
-#: ../../raid.pm_.c:128
-msgid "mkraid failed"
-msgstr ""
-
-#: ../../raid.pm_.c:128
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr ""
-
-#: ../../raid.pm_.c:144
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:17
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-
-#: ../../services.pm_.c:18
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: ../../services.pm_.c:20
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:22
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: ../../services.pm_.c:25
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: ../../services.pm_.c:28
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:30
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-
-#: ../../services.pm_.c:32
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: ../../services.pm_.c:36
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:44
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:46
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: ../../services.pm_.c:48
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:52
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:54
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:56
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:61
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:64
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:67
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:70
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-
-#: ../../services.pm_.c:72
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:74
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:79
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:83
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:85
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Zagon sistema X-Windows pri zagonu sistema"
-
-#: ../../services.pm_.c:86
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:88
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:89
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-
-#: ../../services.pm_.c:118
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "running"
-msgstr "Opozorilo"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "stopped"
-msgstr "Pripni"
-
-#: ../../services.pm_.c:151
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:156
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:163
-msgid "On boot"
-msgstr ""
-
-#: ../../standalone/diskdrake_.c:67
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:37 ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet Connection Sharing"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/drakgw_.c:118
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:119
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:123
-#, fuzzy
-msgid "disable"
-msgstr "Tabela"
-
-#: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148
-#, fuzzy
-msgid "reconfigure"
-msgstr "Nastavitev X"
-
-#: ../../standalone/drakgw_.c:126
-msgid "Disabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:134
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/drakgw_.c:143
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:144
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:148
-#, fuzzy
-msgid "enable"
-msgstr "Tabela"
-
-#: ../../standalone/drakgw_.c:155
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:160
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/drakgw_.c:168
-msgid "Config file content could not be interpreted."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-msgid "Unrecognized config file"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:181
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:207
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:208
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakgw_.c:216
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:217
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:224
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:233
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:242
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid "Potential LAN address conflict found in current config of $_!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:261 ../../standalone/drakgw_.c:267
-#, fuzzy
-msgid "Firewalling configuration detected!"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:276
-#, fuzzy
-msgid "Configuring..."
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:307
-#, fuzzy
-msgid "Problems installing package $_"
-msgstr "Name¹èanje paketa %s"
-
-#: ../../standalone/drakgw_.c:590
-#, fuzzy
-msgid "Congratulations!"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakgw_.c:591
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:608
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:609
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:610
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/drakgw_.c:615
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/drakgw_.c:622
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:59
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:66 ../../standalone/draknet_.c:539
-#, fuzzy
-msgid "Profile: "
-msgstr "priklop neuspe¹en: "
-
-#: ../../standalone/draknet_.c:74
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:108
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:114
-msgid "Name of the profile to create:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:140
-#, fuzzy
-msgid "Hostname: "
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/draknet_.c:147
-#, fuzzy
-msgid "Internet access"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:160
-#, fuzzy
-msgid "Type:"
-msgstr "Tip:"
-
-#: ../../standalone/draknet_.c:163 ../../standalone/draknet_.c:354
-#, fuzzy
-msgid "Gateway:"
-msgstr "Zagonska naprava"
-
-#: ../../standalone/draknet_.c:163 ../../standalone/draknet_.c:354
-msgid "Interface:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:168
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:170 ../../standalone/draknet_.c:357
-#: ../../standalone/net_monitor_.c:122 ../../standalone/net_monitor_.c:224
-#, fuzzy
-msgid "Connected"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:170 ../../standalone/draknet_.c:357
-#: ../../standalone/net_monitor_.c:83 ../../standalone/net_monitor_.c:122
-#: ../../standalone/net_monitor_.c:224
-#, fuzzy
-msgid "Not connected"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/draknet_.c:173 ../../standalone/draknet_.c:358
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:173 ../../standalone/draknet_.c:358
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:191
-#, fuzzy
-msgid "Starting your connection..."
-msgstr "Nastavitev RAMDAC"
-
-#: ../../standalone/draknet_.c:199
-#, fuzzy
-msgid "Closing your connection..."
-msgstr "Nastavitev RAMDAC"
-
-#: ../../standalone/draknet_.c:204
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-
-#: ../../standalone/draknet_.c:207
-#, fuzzy
-msgid "The system is now disconnected."
-msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#: ../../standalone/draknet_.c:219
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Nastavitev servisov"
-
-#: ../../standalone/draknet_.c:226 ../../standalone/draknet_.c:411
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:231
-msgid "Adapter"
-msgstr ""
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "Driver"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/draknet_.c:231
-#, fuzzy
-msgid "Interface"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:231
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:250
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:283
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Obièajni DAC"
-
-#: ../../standalone/draknet_.c:288
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:307
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Preizkus nastavitev"
-
-#: ../../standalone/draknet_.c:391
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:415
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:423
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:429
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:430
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:466 ../../standalone/draknet_.c:470
-#, fuzzy
-msgid "Disable"
-msgstr "Tabela"
-
-#: ../../standalone/draknet_.c:466 ../../standalone/draknet_.c:470
-#, fuzzy
-msgid "Enable"
-msgstr "Tabela"
-
-#: ../../standalone/draknet_.c:504
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:528
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/draknet_.c:532
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/draknet_.c:541
-#, fuzzy
-msgid "Connection type: "
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:547
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-#, fuzzy
-msgid "Provider dns 1 (optional)"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/draknet_.c:561
-#, fuzzy
-msgid "Provider dns 2 (optional)"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/draknet_.c:574
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:575
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr ""
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr ""
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr ""
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-
-#: ../../standalone/draksec_.c:52
-msgid "Setting security level"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:44
-#, fuzzy
-msgid "Control Center"
-msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#: ../../standalone/drakxconf_.c:45
-#, fuzzy
-msgid "Choose the tool you want to use"
-msgstr "Ali ¾elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:23
-#, fuzzy
-msgid "Change Cd-Rom"
-msgstr "Spremeni loèljivost"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:50
-msgid "no serial_usb found\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:54
-msgid "Emulate third button?"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:131
-#, fuzzy
-msgid "Test the mouse here."
-msgstr "Preizkusite mi¹ko"
-
-#: ../../standalone/net_monitor_.c:40 ../../standalone/net_monitor_.c:52
-#, fuzzy
-msgid "Network Monitoring"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/net_monitor_.c:56
-msgid "Statistics"
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:59
-msgid "Sending Speed: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:61
-msgid "Receiving Speed: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:66
-#, fuzzy
-msgid "Close"
-msgstr "Premakni"
-
-#: ../../standalone/net_monitor_.c:100 ../../standalone/net_monitor_.c:104
-#, fuzzy
-msgid "Connecting to Internet "
-msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#: ../../standalone/net_monitor_.c:100 ../../standalone/net_monitor_.c:104
-#, fuzzy
-msgid "Disconnecting from Internet "
-msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#: ../../standalone/net_monitor_.c:114
-#, fuzzy
-msgid "Disconnection from Internet failed."
-msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#: ../../standalone/net_monitor_.c:115
-#, fuzzy
-msgid "Disconnection from Internet complete."
-msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#: ../../standalone/net_monitor_.c:117
-#, fuzzy
-msgid "Connection complete."
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/net_monitor_.c:118
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:188
-msgid "sent: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:191
-msgid "received: "
-msgstr ""
-
-#: ../../standalone/net_monitor_.c:222
-#, fuzzy
-msgid "Connect"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/net_monitor_.c:222
-#, fuzzy
-msgid "Disconnect"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/tinyfirewall_.c:29
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/tinyfirewall_.c:42
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:10
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Linux Mandrake machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:15
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:22
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:27
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:32
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:37
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:42
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:47
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:52
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:57
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:62
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:67
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:83
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:85
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Napaka pri odpiranju %s za pisanje: %s"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Graphics"
-msgstr "Veèpredstavnost"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Internet"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Izberite stre¾nik"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office"
-msgstr "Preklic"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Veèpredstavnost"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Sound"
-msgstr "Veèpredstavnost"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Video"
-msgstr "Veèpredstavnost"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Izberite stre¾nik"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - CD Burning"
-msgstr "Veèpredstavnost"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "stre¾nik"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Nastavitev zaslona"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "®elite preizkusiti nastavitev?"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#~ msgid "GB"
-#~ msgstr "GB"
-
-#~ msgid "KB"
-#~ msgstr "KB"
-
-#~ msgid "TB"
-#~ msgstr "TB"
-
-#~ msgid "%d minutes"
-#~ msgstr "%d minut"
-
-#~ msgid "1 minute"
-#~ msgstr "1 minuta"
-
-#~ msgid "%d seconds"
-#~ msgstr "%d sekund"
-
-#~ msgid "None"
-#~ msgstr "Niè"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Kateri zagonski nalagalnik ¾elite uporabljati?"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Nastavitev zagonskega stila"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "horizontalna aurora (lep¹i izgled)"
-
-#~ msgid "vertical traditionnal aurora"
-#~ msgstr "vertikalna tradicionalna aurora"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Sedaj lahko izberete razliène mo¾nosti sistema.\n"
-#~ "\n"
-#~ "  - Uporabi optimizacijo za trde diske: ta mo¾nost lahko izbolj¹a "
-#~ "delovanje\n"
-#~ "    trdih diskov, vendar je samo za napredne uporabnike. Nekateri nabori\n"
-#~ "    èipov z napakami lahko unièijo podatke, zato bodite pazljivi. Jedro\n"
-#~ "    ima vgrajeno seznam pogonov in naborov, ki povzroèajo probleme, "
-#~ "vendar\n"
-#~ "    èe se ¾elite izogniti neprijetnim preseneèenjem, pustite mo¾nost\n"
-#~ "    neizbrano.\n"
-#~ "\n"
-#~ "  - Izberite varnostno stopnjo: izberete lahko varnostno stopnjo\n"
-#~ "    sistema. Za popolne informacije poglejte v navodila. Osnovno: \n"
-#~ "    èe neveste, izberite \"Srednja\".\n"
-#~ "\n"
-#~ "  - Natanèna velikost RAM-a. èe je potrebno: na¾alost, je dana¹njem "
-#~ "svetu\n"
-#~ "    PC raèunalnikov ni standardne metode spra¹evanja BIOS-a za velikost\n"
-#~ "    prisotnega pomnilnika. Zato lahko GNU/Linux nepravilno prepozna "
-#~ "velikost\n"
-#~ "    pomnilnika. V tem primeru lahko tukaj podate pravilno velikost "
-#~ "pomnilnika.\n"
-#~ "    Razlika za 2 ali 4 MB je normalna.\n"
-#~ "\n"
-#~ "  - Samodejno priklapljanje odstranitvenih medijev: èe ne ¾elite roèno\n"
-#~ "    priklapljati odstranitvenih medijev (CD-ROM, diskete, Zip...) z "
-#~ "uporabo\n"
-#~ "    ukazov \"mount\" in \"umount\", izberite to mo¾nost.\n"
-#~ "\n"
-#~ "  - Omogoèen NumLock pri zagonu: èe ¾elite NumLock omogoèiti pri zagonu,\n"
-#~ "    izberite to mo¾nost (Opozorilo: NumLock lahko pod sistemom X dela ali "
-#~ "ne\n"
-#~ "    dela)."
-
-#~ msgid "Multimedia"
-#~ msgstr "Veèpredstavnost"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Nastavitev èasovne cone"
-
-#~ msgid "Configure printer"
-#~ msgstr "Nastavitev tiskalnika"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Drugo"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Uporabi diskdrake"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Kateri tip razdelka ¾elite?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Linux-Mandrake "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Izberite \"Namestitev\", èe nimate name¹èene ¹e nobene razlièice\n"
-#~ "GNU/Linux-a ali èe ¾elite uporabljati veè razliènih distribucij.\n"
-#~ "\n"
-#~ "Izberite \"Re¹evanje\", èe ¾elite re¹iti prej¹njo razlièico Linux-a "
-#~ "Mandrake:\n"
-#~ "%s ali %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Izberite:\n"
-#~ "\n"
-#~ " - Priporoèen: Èe niste ¹e nikdar name¹èali GNU/Linux-a, izberite to "
-#~ "mo¾nost.\n"
-#~ "\n"
-#~ " - Prilagojen: Èe ste dovolj seznanjeni z GNU/Linux-om, lahko izberete\n"
-#~ "   primaren namen uporabe sistema. Glejte spodaj za podrobnosti.\n"
-#~ "\n"
-#~ " - Napreden: Priporoèeno samo èe ste z GNU/Linux-om zelo dobro "
-#~ "seznanjeni\n"
-#~ "   in ¾elite opraviti zelo prilagojeno namestitev. Tudi tukaj boste "
-#~ "lahko\n"
-#~ "   izbrali primaren namen uporabe va¹ega sistema.\n"
-#~ "   IZBERITE TO MO®NOST, ÈE RESNIÈNO VESTE KAJ DELATE!\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Linux-Mandrake system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "Na tej toèki lahko izberete, katere razdeleke boste uporabili za "
-#~ "namestitev\n"
-#~ "sistema Linux-Mandrake, èe so ¾e definirani (iz prej¹njih namestitev GNU/"
-#~ "Linux\n"
-#~ "ali z drugimi orodji za razdelke). V drugih primerih je potrebo na trdem "
-#~ "disku\n"
-#~ "definirati razdelke. S tem razdelite kapaciteto trdega diska v loèena "
-#~ "logièna podroèja.\n"
-#~ "\n"
-#~ "\n"
-#~ "Èe morate ustvariti nove razdelke, uporabite za samodejno ustvarjanje "
-#~ "razdelkov\n"
-#~ "GNU/Linux \"Samodejno alociranje\". Trdi disk izberete s pritiskom na "
-#~ "\"hda\"\n"
-#~ "za prvi IDE disk, \"hdb\" za drugi ali \"sda\" za prvi SCSI disk itd.\n"
-#~ "\n"
-#~ "Dva pogosta razdelka sta: korenski razdelek (/), ki je zaèetna toèka\n"
-#~ "zgradbe imenika datoteènega sistema in /boot, ki vsebuje vse datoteke\n"
-#~ "potrebne za zagon operacijskega sistema, po vklopu raèunalnika.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ker so uèinki tega koraka nepovratni, je lahko ustvarjanje razdelkov\n"
-#~ "za neizku¹enega uporabnika nevarno in zastra¹ujoèe. DiskDrake vam\n"
-#~ "bo pri tem koraku karseda olaj¹al delo. Preden nadaljujete si vzemite\n"
-#~ "èas in poglejte dokumentacijo.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do vsake mo¾nosti lahko pridete z tipkami: med razdelki izbirate z\n"
-#~ "uporabo tipke Tab in pu¹èic Navzgor/Navzdol. Ko izberete razdelek "
-#~ "pritisnite:\n"
-#~ "\n"
-#~ "- Ctrl-c za ustvarjanje novega razdelka (èe ste izbrali prazen razdelek)\n"
-#~ "\n"
-#~ "- Ctrl-d za brisanje razdelka\n"
-#~ "\n"
-#~ "- Ctrl-m za nastavitev toèke priklopa\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Vsi, na novo ustvarjeni razdelki morajo biti pred uporabo formatirani\n"
-#~ "(formatiranje pomenu ustvarjanje datoteènega sistema). Na tej toèki\n"
-#~ "lahko ponovno formatirate obstojeèe razdelke, tako da bodo podatki, ki\n"
-#~ "jih vsebujejo izbrisani. Opozorilo: obstojeèih razdelkov vam ni potrebno\n"
-#~ "ponovno formatirati, posebej, èe vsebujejo datoteke ali podatke, ki jih "
-#~ "¾elite obdr¾ati. Ponavadi sta to razdelka /home in /usr/local."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Izbrani paketi se sedaj name¹èajo. Ta operacija bo trajala nekaj\n"
-#~ "minut, razen èe ste izbrali nadgradnjo obstojeèega sistema, v tem\n"
-#~ "primeru lahko preteèe veè èasa celo preden se bo nadgradnja zaèela."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Èe DrakX ni na¹el mi¹ke ali èe ¾elite preveriti izbiro, boste\n"
-#~ "sedaj spodaj videli seznam mi¹k.\n"
-#~ "\n"
-#~ "\n"
-#~ "Èe se strinjate z nastavitvami DrakX, pritisnite 'V redu'.\n"
-#~ "Drugaèe lahko iz menija izberete mi¹ko, ki se bolje ujema z va¹o.\n"
-#~ "\n"
-#~ "\n"
-#~ "V primeru serijske mi¹ke, boste morali nastaviti tudi serijska vrata\n"
-#~ "na katera je prikljuèena."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Linux-Mandrake system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Ta del je posveèen nastavitvi lokalnega omre¾ja (LAN)\n"
-#~ "ali modema.\n"
-#~ "\n"
-#~ "Izberite \"Lokalno omre¾je\" in DrakX bo posku¹al\n"
-#~ "najti mre¾no kartico v raèunalniku. PCI kartice\n"
-#~ "bi morale biti najdene in inicializirane samodejno.\n"
-#~ "Èe imate kartico tipa ISA, samodejna prepoznava ne bo delovala, tako\n"
-#~ "da boste morali izbrati gonilnik iz seznama, ki se bo prikazal.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tako kot za SCSI krmilnike, lahko tudi tukaj prviè prepustite iskanje\n"
-#~ "naprave gonilniku, drugaèe pa morate gonilniku podati pravilne "
-#~ "nastavitve,\n"
-#~ "ki jih lahko najdete s pomoèjo dokumentacije va¹e strojne opreme.\n"
-#~ "\n"
-#~ "\n"
-#~ "Èe name¹èate sistem Linux-Mandrake na raèunalnik, ki je del ¾e "
-#~ "obstojeèega\n"
-#~ "omre¾ja, vam bo va¹ vzdr¾evalec omre¾ja posredoval vse potrebne\n"
-#~ "informacije (naslov IP, omre¾na maska in ime raèunalnika). Èe doma\n"
-#~ "postavljate privatno omre¾je samo za primer, izberite naslov sami.\n"
-#~ "\n"
-#~ "\n"
-#~ "Izberite \"Klicanje z modemom\" za nastavitev modemske povezave v\n"
-#~ "internet. DrakX bo posku¹al najti modem, èe ne bo uspel, boste\n"
-#~ "morali nastaviti pravilna serijska vrata, na katerih imate prikljuèen\n"
-#~ "modem."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "GNU/Linux omogoèa uporabo mnogih tipov tiskalnikov. Vsak tip\n"
-#~ "zahteva razliène nastavitve. Upo¹tevajte pa, da je prevzeto ime\n"
-#~ "za tiskalnik, ki ga uporablja sistem, 'lp'; tako da morate imeti\n"
-#~ "tiskalnik s tem imenom; lahko pa tiskalniku daste veè imen, loèenih z\n"
-#~ "znakom '|'. Èe ¾elite imeti bolj smiselno ime za tiskalnik, ga dajte\n"
-#~ "na prvo mesto npr: \"Moj tiskalnik|lp\".\n"
-#~ "Tiskalnik, ki bo imel v imenu \"lp\" bo prevzet tiskalnik.\n"
-#~ "\n"
-#~ "\n"
-#~ "Èe je tiskalnik fizièno povezan z raèunalnikom izberite\n"
-#~ "\"Lokalen tiskalnik\". Nato boste morali izbrati primeren filter in\n"
-#~ "vrata, na katera je tiskalnik prikljuèen.\n"
-#~ "\n"
-#~ "\n"
-#~ "Èe ¾elite uporabljati tiskalnik, ki se nahaja na drugem raèunalniku "
-#~ "Unix,\n"
-#~ "morate izbrati \"Oddaljen lpd\". Za delovanje ni potrebno vnesti\n"
-#~ "uporabni¹kega imena in gesla, vnesti morate samo ime tiskalni¹ke vrste\n"
-#~ "(printer queue) na oddaljenem stre¾niku.\n"
-#~ "\n"
-#~ "\n"
-#~ "Èe ¾elite uporabljati tiskalnik SMB (tiskalnik, ki je prikljuèen na "
-#~ "raèunalnik\n"
-#~ "z operacijskim sistemom Okna 9x/NT), morate poznati njegovo SMB ime (to "
-#~ "ni\n"
-#~ "njegovo TCP/IP ime) in verjetno ¹e njegov naslov IP. Za dostop pa boste\n"
-#~ "potrebovali ¹e uporabni¹ko ime, geslo in delovno skupino. Enako velja za\n"
-#~ "tiskalnik prikljuèen na Netware okolje, le da zanj ne potrebujete "
-#~ "delovne\n"
-#~ "skupine."
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "Zelo priporoèljivo je, da tukaj odgovorite z \"Da\". Èe boste kasneje\n"
-#~ "name¹èali Microsoft Okna, bodo Okna povozila zagonski sektor.\n"
-#~ "Razen, èe boste naredili zagonski disk kot predlagano, ne boste mogli "
-#~ "veè\n"
-#~ "zagnati sistema GNU/Linux."
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Premaknite kolesce!"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Pozabi spremembe?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Samodejna loèljivost"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Za zaznavo mo¾nih loèljivosti, bodo sedaj razliène preizku¹ene.\n"
-#~ "Zaslon bo utripal...\n"
-#~ "Èe ¾elite, ga lahko izklopite, po koncu boste sli¹ali pisk"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Mo¾ne loèljivosti se lahko poi¹èejo samodejno (npr: 800x600).\n"
-#~ "Vèasih lahko pride do nepredvidene ustavitve sistema.\n"
-#~ "®elite poskusiti?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Najden ni bil noben veljaven naèin\n"
-#~ "Poskusite z drugo grafièno kartico ali monitorjem"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Samodejno iskanje loèljivosti"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "nfs priklop neuspe¹en"
diff --git a/perl-install/share/po/sp.po b/perl-install/share/po/sp.po
deleted file mode 100644
index d03ca7221..000000000
--- a/perl-install/share/po/sp.po
+++ /dev/null
@@ -1,11871 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999,2000,2001 Mandrakesoft
-# Jankovic Tomislav <tomaja@net.yu> 1999,2000,2001
-#
-#
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-11-19 18:34+0100\n"
-"PO-Revision-Date: 2001-08-12 13:12GMT+1\n"
-"Last-Translator: Toma Jankovic <tomaja@net.yu>\n"
-"Language-Team: SERBIAN <office@mandrake.co.yu>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-5\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "¿ÞÔÕáØ áÒÕ ÓÛÐÒÕ ÝÕ×ÐÒØáÝÞ"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "ºÞàØáâØ Xinerama ÕÚáâÕÝ×Øjã"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "¿ÞÔÕáØ áÐÜÞ ÚÐàâØæã \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Multi-head ÚÞÝäØÓãàÐæØøa"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"²aè áØáâÕÜ ßÞÔàÖÐÒÐ Üultiple head ÚÞÝäØÓãàÐæØjã.\n"
-"´Ð ÛØ âÞ ÖÕÛâÕ ÔÐ ãàÐÔØâe?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "³àÐäØçÚÐ ÚÐàâØæÐ"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "¸×ÐÑÕàØâÕ ÚÐàâØæã"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "¸×ÐÑÕàØâÕ X áÕàÒÕà"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X áÕàÒÕà"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "ºÞøã XFree ÚÞÝäØÓãàÐæØjã ÖÕÛØâÕ ÔÐ ØÜÐâe ?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"²aèÐ ÚÐàâØæÐ ÜÞÖÕ ØÜÐâØ 3D åÐàÔÒÕàáÚã ÐÚæÕÛÕàÐæØjã ÐÛØ áÐÜÞ áa XFree %s.\n"
-"²aèã ÚÐàâØæã ßÞÔàÖÐÒa XFree %s ÚÞjØ ÜÞÖÕ ØÜaâØ ÑÞùã ßÞÔàèÚã Ø ×Ð 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "²aèÐ ÚÐàâØæÐ ÜÞÖÕ ØÜÐâØ 3D åÐàÔÒÕàáÚã ÐÚæÕÛÕàÐæØjã áÐ XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s áÐ 3D åÐàÔÒÕàáÚÞÜ ÐÚæÕÛÕàÐæØjÞÜ"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"²aèÐ ÚÐàâØæÐ ÜÞÖÕ ØÜÐâØ 3D åÐàÔÒÕàáÚã ÐÚæÕÛÕàÐæØjã ÐÛØ áÐÜÞ áÐ XFree %s,\n"
-"·°¿°¼Â¸Âµ ÔÐ jÕ ÞÒÞ µºÁ¿µÀ¸¼µ½Â°»½A ßÞÔàèÚÐ ×Ð 3D Ø ÜÞÖÕ ÔÞÒÕáâØ ÔÞ "
-"ÑÛÞÚØàaúÐ àÐçãÝÐàÐ."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s áÐ µºÁ¿µÀ¸¼µ½Â°»½¾¼ 3D åÐàÔÒÕàáÚÞÜ ÐÚæÕÛÕàÐæØjÞÜ"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"²aèÐ ÚÐàâØæÐ ÜÞÖÕ ØÜÐâØ 3D åÐàÔÒÕàáÚã ÐÚæÕÛÕàÐæØjã ÐÛØ áÐÜÞ áÐ XFree %s,\n"
-"·°¿°¼Â¸Âµ ÔÐ jÕ ÞÒÞ µºÁ¿µÀ¸¼µ½Â°»½A ßÞÔàèÚÐ ×Ð 3D Ø ÜÞÖÕ ÔÞÒÕáâØ ÔÞ "
-"ÑÛÞÚØàaúÐ àÐçãÝÐàÐ.\n"
-"²aèã ÚÐàâØæã ßÞÔàÖÐÒa XFree %s ÚÞjØ ÜÞÖÕ ØÜaâØ ÑÞùã ßÞÔàèÚã Ø ×Ð 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (¸ÝáâÐÛÐæØja ÔØáßÛÕj ÔàÐjÒÕà)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree ÚÞÝäØÓãàÐæØøa"
-
-#: ../../Xconfigurator.pm_.c:439
-msgid "Select the memory size of your graphic card"
-msgstr "ºÞÛØçØÝÐ ÜÕÜÞàØøÕ ÝÐ ÓàÐäØçÚÞø ÚÐàâØæØ"
-
-#: ../../Xconfigurator.pm_.c:497
-msgid "Choose options for server"
-msgstr "¾ßæØøÕ ×Ð áÕàÒÕà"
-
-#: ../../Xconfigurator.pm_.c:521
-msgid "Choose a monitor"
-msgstr "¸×ÐÑÕàØâÕ ÜÞÝØâÞà"
-
-#: ../../Xconfigurator.pm_.c:521
-msgid "Monitor"
-msgstr "¼ÞÝØâÞà"
-
-#: ../../Xconfigurator.pm_.c:524
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"¼ÞàÐâÕ ÔÐ ÝÐÒÕÔÕâÕ åÞàØ×ÞÝâÐÛÝØ áØÝåàÞÝØ×ÐæØÞÝØ ÞßáÕÓ ÒÐèÕÓ ÜÞÝØâÞàÐ.\n"
-"¼ÞÖÕâÕ ÓÐ ØÛØ Ø×ÐÑàÐâØ Ø× ãÝÐßàÕÔ ×ÐÔÐâØå ÒàÕÔÝÞáâØ ÚÞøÕ ÞÔÓÞÒÐàÐøã\n"
-"ØÝÔãáâàØøáÚØÜ áâÐÝÔÐàÔØÜÐ ÜÞÝØâÞàÐ, ØÛØ ÔÐ ÝÐÒÕÔÕâÕ ÞÔàÕòÕÝØ ÞßáÕÓ.\n"
-"\n"
-"²µ¾¼° ¨µ ²°¶½¾ ÔÐ ÝÕ ÝÐÒÕÔÕâÕ âØß ÜÞÝØâÞàÐ ÚÞøØ ØÜÐ ÞÒÐø ÞßáÕÓ ÒÕûØ ÝÕÓÞ\n"
-"èâÞ ÓÐ ØÜÐ ÒÐè ÜÞÝØâÞà. °ÚÞ ÝØáâÕ áØÓãàÝØ, ÞÔÐÑÕàØâÕ ÜÐúÕ ÒàÕÔÝÞáâØ."
-
-#: ../../Xconfigurator.pm_.c:531
-msgid "Horizontal refresh rate"
-msgstr "ÅÞàØ×ÞÝâÐÛÝÐ äàÕÚÒÕÝæØøÐ"
-
-#: ../../Xconfigurator.pm_.c:532
-msgid "Vertical refresh rate"
-msgstr "²ÕàâØÚÐÛÝÐ äàÕÚÒÕÝæØøÐ"
-
-#: ../../Xconfigurator.pm_.c:569
-msgid "Monitor not configured"
-msgstr "¼ÞÝØâÞà ÝØøÕ ÚÞÝäØÓãàØáÐÝ"
-
-#: ../../Xconfigurator.pm_.c:572
-msgid "Graphic card not configured yet"
-msgstr "³àÐäØçÚÐ ÚÐàâÐ øÞè ÝØøÕ ÚÞÝäØÓãàØáÐÝÐ"
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Resolutions not chosen yet"
-msgstr "ÀÕ×ÞÛãæØøÐ øÞè ÝØøÕ Ø×ÐÑàÐÝÐ"
-
-#: ../../Xconfigurator.pm_.c:593
-msgid "Do you want to test the configuration?"
-msgstr "´Ð ÛØ åÞûÕâÕ ÔÐ âÕáâØàÐâÕ ÚÞÝäØÓãàÐæØøã?"
-
-#: ../../Xconfigurator.pm_.c:597
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "ÃßÞ×ÞàÕúÕ: âÕáâØàÐúÕ ÞÒÕ ÓàÐäØçÚÕ ÚÐàâØæÕ ÜÞÖÕ ×ÐÜà×ÝãâØ Òaè ÚÞÜßjãâÕà"
-
-#: ../../Xconfigurator.pm_.c:600
-msgid "Test of the configuration"
-msgstr "ÂÕáâØàÐúÕ ÚÞÝäØÓãàÐæØøÕ"
-
-#: ../../Xconfigurator.pm_.c:638 ../../Xconfigurator.pm_.c:650
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"ßÞÚãèÐøâÕ áÐ ßàÞÜÕÝÞÜ ßÐàÐÜÕâÐàÐ"
-
-#: ../../Xconfigurator.pm_.c:638 ../../Xconfigurator.pm_.c:650
-msgid "An error has occurred:"
-msgstr "ÅÜ, ÓàÕèÚÐ:"
-
-#: ../../Xconfigurator.pm_.c:674
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "¸×ÛÐ× ×Ð %d áÕÚãÝÔØ"
-
-#: ../../Xconfigurator.pm_.c:685
-msgid "Is this the correct setting?"
-msgstr "´Ð ÛØ øÕ ÞÒÞ ØáßàÐÒÝÞ ßÞÔeèÕÝÞ?"
-
-#: ../../Xconfigurator.pm_.c:694
-msgid "An error has occurred, try to change some parameters"
-msgstr "ÅÜ, ßÞøÐÒØÛÐ áÕ ÓàÕèÚÐ, ßàÞÑÐøâÕ ÔÐ ßàÞÜÕÝØâe ßÐàÐÜÕâàÕ"
-
-#: ../../Xconfigurator.pm_.c:765
-msgid "Resolution"
-msgstr "ÀÕ×ÞÛãæØøÐ"
-
-#: ../../Xconfigurator.pm_.c:816
-msgid "Choose the resolution and the color depth"
-msgstr "¸×ÐÑÕàØâÕ àÕ×ÞÛãæØøã Ø ÑàÞø ÑÞøÐ ßàØ ßàØÚa×ã"
-
-#: ../../Xconfigurator.pm_.c:818
-#, c-format
-msgid "Graphic card: %s"
-msgstr "³àÐäØçÚÐ ÚÐàâØæÐ: %s"
-
-#: ../../Xconfigurator.pm_.c:819
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 áÕàÒÕà: %s"
-
-#: ../../Xconfigurator.pm_.c:835 ../../printerdrake.pm_.c:1918
-#: ../../standalone/draknet_.c:301 ../../standalone/draknet_.c:304
-msgid "Expert Mode"
-msgstr "µÚáßÕàâÝØ ÜÞÔ"
-
-#: ../../Xconfigurator.pm_.c:836
-msgid "Show all"
-msgstr "¿àØÚÐÖØ áÒÕ"
-
-#: ../../Xconfigurator.pm_.c:881
-msgid "Resolutions"
-msgstr "ÀÕ×ÞÛãæØøÐ"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "ÂØß âÐáâÐâãàÕ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "ÂØß ÜØèÐ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "¼Øè øÕ ßÞáâÐÒùÕÝ ÝÐ ãàÕòÐø: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "¼ÞÝØâÞà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1446
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "¼ÞÝØâÞà - åÞàØ×ÞÝâÐÛÝa äàÕÚÒÕÝæØøÐ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "¼ÞÝØâÞà - ÒÕàâØÚÐÛÝÞ ÞáÒÕÖÐÒÐúÕ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "³àÐäØçÚÐ ÚÐàâØæÐ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1449
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "³àÐäØçÚÐ ÚÐàâØæÐ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "¼ÕÜÞàØøÐ ÝÐ ÓàÐäØçÚÞø ÚÐàâØæØ: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1452
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "±àÞø ÑÞøÐ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1453
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "ÀÕ×ÞÛãæØøÐ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1455
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 áÕàÒÕà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1456
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ÔàÐjÒÕà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1474
-msgid "Preparing X-Window configuration"
-msgstr "¿àÞÒÕàÐ ÚÞÝäØÓãàÐæØøÕ ×Ð X-Window áØáâÕÜ"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "What do you want to do?"
-msgstr "ÈâÐ ÖÕÛØâÕ ÔÐ ãàÐÔØâÕ?"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Change Monitor"
-msgstr "¿àÞÜÕÝÐ ÜÞÝØâÞàÐ"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Change Graphic card"
-msgstr "¿àÞÜÕÝÐ ÓàÐäØçÚÕ ÚÐàâØæÕ"
-
-#: ../../Xconfigurator.pm_.c:1502
-msgid "Change Server options"
-msgstr "¿àÞÜÕÝÐ ÁÕàÒÕà ÞßæØøÐ"
-
-#: ../../Xconfigurator.pm_.c:1503
-msgid "Change Resolution"
-msgstr "¿àÞÜÕÝÐ àÕ×ÞÛãæØøÕ"
-
-#: ../../Xconfigurator.pm_.c:1504
-msgid "Show information"
-msgstr "¿àØÚÐÖØ ØÝäÞàÜÐæØøÕ"
-
-#: ../../Xconfigurator.pm_.c:1505
-msgid "Test again"
-msgstr "ÂÕáâØàÐø ßÞÝÞÒÞ"
-
-#: ../../Xconfigurator.pm_.c:1506 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "ºàÐø"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"ÁÐçãÒÐø ßàÞÜÕÝÕ?\n"
-"ÂàÕÝãâÝÐ ÚÞÝäØÓãàÐæØja jÕ:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1537
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "¼ÞÛØÜ, ßÞÝÞÒÞ ãÝÕáØâÕ %s àÐÔØ ÐÚâØÒØàÐúÐ ßàÞÜÕÝÐ"
-
-#: ../../Xconfigurator.pm_.c:1557
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "¼ÞÛØÜ ÒÐè Ø×ÛÞÓãøâÕ áÕ Ø àÕáâÐàâãøâÕ (Ctrl-Alt-BackSpace) àÐçãÝÐà"
-
-#: ../../Xconfigurator.pm_.c:1560
-msgid "X at startup"
-msgstr "X ÞÚàãÖÕúÕ ÝÐ áâÐàâã"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ja ÜÞÓã ßÞÔÕáâØ ÒÐè àÐçãÝÐà ÔÐ ÐãâÞÜÐâáÚØ ßÞÔØÖÕ X ÞÚàãÖÕúÕ ßàØ áâÐàâÐúã.\n"
-"´Ð ÛØ ÖÕÛØâÕ X ÞÚàãÖÕúÕ ßàØ àÕáâÐàâã ?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ÑÞøÐ (8-ÑØâÝÐ ßÐÛÕâÐ)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 åØùÐÔÕ ÑÞøÐ (15-ÑØâÝÐ ßÐÛÕâÐ)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 åØùÐÔÐ ÑÞøÐ (16-ÑØâÝÐ ßÐÛÕâÐ)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 ÜØÛØÞÝÐ ÑÞøÐ (24-ÑØâÝÐ ßÐÛÕâÐ)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 ÜØÛØøÐàÔÕ ÑÞøÐ (32-ÑØâÝÐ ßÐÛÕâÐ)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB ØÛØ ÒØèÕ"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "ÁâÐÝÔÐàÔÝØ VGA, 640x480 ÝÐ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "ÁãßÕà VGA, 800x600 ÝÐ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 ÚÞÜßÐâ., 1024x768 ÝÐ 87 Hz áÐ ßàÕßÛØâÐúÕÜ (ÝÕ 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "ÁãßÕà VGA, 1024x768 ÝÐ 87 Hz áÐ ßàÕßÛØâÐúÕÜ, 800x600 ÝÐ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 ÝÐ 60 Hz, 640x480 ÝÐ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA ÑÕ× ßàÕßÛØâÐúÐ, 1024x768 ÝÐ 60 Hz, 800x600 ÝÐ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "²ØáÞÚÞäàÕÚÒÕÝâÝØ SVGA, 1024x768 ÝÐ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "¼ÞÝØâÞà ÚÞøØ àÐÔØ áÐ 1280x1024 ÝÐ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "¼ÞÝØâÞà ÚÞøØ àÐÔØ áÐ 1280x1024 ÝÐ 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "¼ÞÝØâÞà ÚÞøØ àÐÔØ áÐ 1280x1024 ÝÐ 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "¼ÞÝØâÞà ÚÞøØ àÐÔØ áÐ 1600x1200 ÝÐ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "¼ÞÝØâÞà ÚÞøØ àÐÔØ áÐ 1600x1200 ÝÐ 76 Hz"
-
-#: ../../any.pm_.c:104 ../../any.pm_.c:129
-msgid "First sector of boot partition"
-msgstr "¿àÒØ áÕÚâÞà áâÐàâÝÕ ßÐàâØæØøÕ"
-
-#: ../../any.pm_.c:104 ../../any.pm_.c:129 ../../any.pm_.c:202
-msgid "First sector of drive (MBR)"
-msgstr "¿àÒØ áÕÚâÞà ÔØáÚÐ (MBR)"
-
-#: ../../any.pm_.c:108
-msgid "SILO Installation"
-msgstr "SILO ØÝáâÐÛÐæØøÐ"
-
-#: ../../any.pm_.c:109 ../../any.pm_.c:122
-msgid "Where do you want to install the bootloader?"
-msgstr "³ÔÕ ÑØáâÕ ÔÐ ØÝáâÐÛØàÐâÕ áâÐàâÕà?"
-
-#: ../../any.pm_.c:121
-msgid "LILO/grub Installation"
-msgstr "LILO/grub ØÝáâÐÛÐæØøÐ"
-
-#: ../../any.pm_.c:133 ../../any.pm_.c:147
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:135
-msgid "LILO with text menu"
-msgstr "LILO áÐ âÕÚáâãÐÛÝØÜ ÜÕÝØjeÜ"
-
-#: ../../any.pm_.c:136 ../../any.pm_.c:147
-msgid "LILO with graphical menu"
-msgstr "LILO áÐ ÓàÐäØçÚØÜ ÜÕÝØjÕÜ"
-
-#: ../../any.pm_.c:139
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:143
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "ÁâÐàâaúÕ Ø× DOS/Windows-a (loadlin)"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:147
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:185
-msgid "Bootloader main options"
-msgstr "³ÛÐÒÝÕ ÞßæØøÕ áâÐàâÕàa"
-
-#: ../../any.pm_.c:154 ../../any.pm_.c:186
-msgid "Bootloader to use"
-msgstr "ÁâÐàâÕà ÚÞjØ ûe áÕ ÚÞàØáâØâØ"
-
-#: ../../any.pm_.c:156
-msgid "Bootloader installation"
-msgstr "¸ÝáâÐÛÐæØja áâÐàâÕàa"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:188
-msgid "Boot device"
-msgstr "ÁâÐàâÝØ (boot) ãàÕòÐø"
-
-#: ../../any.pm_.c:159
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ÝÕ àÐÔØ ÝÐ áâÐàØÜ BIOS-ØÜa)"
-
-#: ../../any.pm_.c:160
-msgid "Compact"
-msgstr "ºÞÜßÐÚâ"
-
-#: ../../any.pm_.c:160
-msgid "compact"
-msgstr "ÚÞÜßÐÚâ"
-
-#: ../../any.pm_.c:161 ../../any.pm_.c:260
-msgid "Video mode"
-msgstr "²ØÔÕÞ ÜÞÔ"
-
-#: ../../any.pm_.c:163
-msgid "Delay before booting default image"
-msgstr "¿Ðã×Ð ßàÕ áâÐàâÐúÐ default image-Ð"
-
-#: ../../any.pm_.c:165 ../../any.pm_.c:743
-#: ../../install_steps_interactive.pm_.c:1011 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:418 ../../printerdrake.pm_.c:497
-#: ../../standalone/draknet_.c:620
-msgid "Password"
-msgstr "»Þ×ØÝÚÐ"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:744
-#: ../../install_steps_interactive.pm_.c:1012
-msgid "Password (again)"
-msgstr "»Þ×ØÝÚÐ (ßÞÝÞÒØâÕ)"
-
-#: ../../any.pm_.c:167
-msgid "Restrict command line options"
-msgstr "¾ÓàÐÝØçÕÝÐ ÚÞÜÐÝÔÝÐ ÛØÝØÚÐ - ÞßæØøÕ"
-
-#: ../../any.pm_.c:167
-msgid "restrict"
-msgstr "ÞÓàÐÝØçÕÝÞ"
-
-#: ../../any.pm_.c:169
-msgid "Clean /tmp at each boot"
-msgstr "¾çØáâØ /tmp ßàØ áÒÐÚÞÜ áâÐàâaúã"
-
-#: ../../any.pm_.c:170
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "´ÕäØÝØèØ ÒÕÛØçØÝã RAM ÐÚÞ øÕ ßÞâàÕÑÝÞ (ÔÕâÕÚâÞÒÐÝÞ øÕ %d MB)"
-
-#: ../../any.pm_.c:172
-msgid "Enable multi profiles"
-msgstr "¾ÜÞÓãûØ ÜãÛâØ-ßàÞäØÛÕ"
-
-#: ../../any.pm_.c:176
-msgid "Give the ram size in MB"
-msgstr "¿àØÚÐÖØ ÒÕÛØçØÝã RAM-Ð ã Mb"
-
-#: ../../any.pm_.c:178
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"¾ßæØøÐ``¾ÓàÐÝØçÕÝÐ ÚÞÜÐÝÔÝÐ ÛØÝØÚÐ - ÞßæØøÕ'' øÕ ÝÕãßÞâàÕÑùØÒÐ ÑÕ× ÛÞ×ØÝÚÕ"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:720
-#: ../../install_steps_interactive.pm_.c:1006
-msgid "Please try again"
-msgstr "¿àÞÑÐøâÕ ßÞÝÞÒÞ"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:720
-#: ../../install_steps_interactive.pm_.c:1006
-msgid "The passwords do not match"
-msgstr "½ÕßÞÔãÔÐàÝÞáâ ÛÞ×ØÝÚØ"
-
-#: ../../any.pm_.c:187
-msgid "Init Message"
-msgstr "¸ÝØæØjÐÛÝÐ ßÞàãÚa"
-
-#: ../../any.pm_.c:189
-msgid "Open Firmware Delay"
-msgstr "¾âßÞçÝØ Firmware ßÐã×ã"
-
-#: ../../any.pm_.c:190
-msgid "Kernel Boot Timeout"
-msgstr "¿Ðã×Ð ßàØ áâÐàâaúã ÚÕàÝÕÛa"
-
-#: ../../any.pm_.c:191
-msgid "Enable CD Boot?"
-msgstr "¾ÜÞÓãûØ áâÐàâaúÕ áÐ CD-a?"
-
-#: ../../any.pm_.c:192
-msgid "Enable OF Boot?"
-msgstr "¾ÜÞÓãûØ OF áâÐàâaúÕ?"
-
-#: ../../any.pm_.c:193
-msgid "Default OS?"
-msgstr "¿ÞÔàÐ×ãÜÕÒÐÝØ ¾Á ?"
-
-#: ../../any.pm_.c:217
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"¾ÒÞ áã ßÞáâÐÒùÝÕ ÞßæØøÕ.\n"
-"¼ÞÖÕâÕ ÔÞÔÐâØ ÝÞÒÕ ØÛØ Ø×ÜÕÝØâØ áâÐàÕ."
-
-#: ../../any.pm_.c:227
-msgid "Add"
-msgstr "´ÞÔÐø"
-
-#: ../../any.pm_.c:227 ../../any.pm_.c:731 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1879
-#: ../../printerdrake.pm_.c:1880 ../../printerdrake.pm_.c:1937
-#: ../../printerdrake.pm_.c:1981
-msgid "Done"
-msgstr "ÃàÐòÕÝÞ"
-
-#: ../../any.pm_.c:227
-msgid "Modify"
-msgstr "¿àÞÜÕÝØ"
-
-#: ../../any.pm_.c:235
-msgid "Which type of entry do you want to add?"
-msgstr "ºÞøã Òàáâã ãÝÞáa ÔÞÔÐjÕâe ?"
-
-#: ../../any.pm_.c:236
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:236
-msgid "Other OS (SunOS...)"
-msgstr "´àãÓØ ¾Á-ÞÒØ (SunOS,BSD,...)"
-
-#: ../../any.pm_.c:237
-msgid "Other OS (MacOS...)"
-msgstr "´àãÓØ ¾Á-ÞÒØ (MacOS,BSD,...)"
-
-#: ../../any.pm_.c:237
-msgid "Other OS (windows...)"
-msgstr "´àãÓØ ¾Á-ÞÒØ (Windows,BSD,BeOS,...)"
-
-#: ../../any.pm_.c:256
-msgid "Image"
-msgstr "ÁÛØÚÐ"
-
-#: ../../any.pm_.c:257 ../../any.pm_.c:268
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:258 ../../any.pm_.c:287
-msgid "Append"
-msgstr "´ÞÔÐâaÚ"
-
-#: ../../any.pm_.c:262
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:263
-msgid "Read-write"
-msgstr "ÇØâÐúÕ-ßØáÐúÕ RW"
-
-#: ../../any.pm_.c:270
-msgid "Table"
-msgstr "ÂÐÑÕÛÐ"
-
-#: ../../any.pm_.c:271
-msgid "Unsafe"
-msgstr "½ÕáØÓãàÝÞ"
-
-#: ../../any.pm_.c:278 ../../any.pm_.c:283 ../../any.pm_.c:286
-msgid "Label"
-msgstr "¾×ÝÐÚÐ"
-
-#: ../../any.pm_.c:280 ../../any.pm_.c:291
-msgid "Default"
-msgstr "¿ÞÔàÐ×ãÜÕÒÐÝÞ"
-
-#: ../../any.pm_.c:288
-msgid "Initrd-size"
-msgstr "Initrd-ÒÕÛØçØÝa"
-
-#: ../../any.pm_.c:290
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:298
-msgid "Remove entry"
-msgstr "ÃÚÛÐúÐÜ ãÝÞá"
-
-#: ../../any.pm_.c:301
-msgid "Empty label not allowed"
-msgstr "¿àÐ×ÝÐ Þ×ÝÐÚÐ ÝØøÕ ÔÞ×ÒÞùÕÝÐ"
-
-#: ../../any.pm_.c:302
-msgid "This label is already used"
-msgstr "¾ÒÐ Þ×ÝÐÚÐ øÕ ÒÕû ã ãßÞâàÕÑØ"
-
-#: ../../any.pm_.c:610
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "¿àÞÝÐòÕÝÞ  %s %s ØÝâÕàäÕøáa"
-
-#: ../../any.pm_.c:611
-msgid "Do you have another one?"
-msgstr "´Ð ÛØ ØÜÐâÕ øÞè øÕÔÐÝ?"
-
-#: ../../any.pm_.c:612
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "¸ÜÐâÕ ÛØ øÞè %s ØÝâÕàäÕøáÐ?"
-
-#: ../../any.pm_.c:614 ../../any.pm_.c:773 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:720
-msgid "No"
-msgstr "½Õ"
-
-#: ../../any.pm_.c:614 ../../any.pm_.c:772 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:720
-msgid "Yes"
-msgstr "´Ð"
-
-#: ../../any.pm_.c:615
-msgid "See hardware info"
-msgstr "¿ÞÓÛÕÔÐø ØÝäÞàÜÐæØøÕ Þ åÐàÔÒÕàã"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:650
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "¸ÝáâÐÛØàÐÜ ÔàÐøÒÕà ×Ð %s ÚÐàâØæã %s"
-
-#: ../../any.pm_.c:651
-#, c-format
-msgid "(module %s)"
-msgstr "(ÜÞÔãÛ %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:662
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "ºÞøØ %s ÔàÐøÒÕà ÔÐ ßàÞÑÐÜ?"
-
-#: ../../any.pm_.c:670
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"à ÝÕÚØÜ áÛãçÐøÕÒØÜÐ, ÔàÐøÒÕà %s ×ÐåâÕÒÐ ÔÞÔÐâÝÕ ØÝäÞàÜÐæØøÕ\n"
-"×Ð ßàÐÒØÛÐÝ àÐÔ, ÜÐÔÐ ÜÞÖÕ ÛÕßÞ ÔÐ àÐÔØ Ø ÑÕ× úØå. ´Ð ÛØ åÞûÕâÕ\n"
-"áÐÜØ ÔÐ ãÝÕáÕâÕ ÔÞÔÐâÝÕ ßÞÔÐâÚÕ ×Ð úÕÓÐ, ØÛØ ÔÐ Øå ÔàÐøÒÕà áÐÜ ÞÔàÕÔØ?\n"
-"¼ÞÓãûÕ øÕ ÔÐ ûÕ ßàÞÑÐ ×ÐÓÛÐÒØâØ ÒÐè àÐçãÝÐà, ÐÛØ ÝÕûÕ ÝÐÝÕâØ ÝØÚÐÚÒã èâÕâã."
-
-#: ../../any.pm_.c:675
-msgid "Autoprobe"
-msgstr "°ãâÞÜÐâáÚÐ ßàÞÑÐ"
-
-#: ../../any.pm_.c:675
-msgid "Specify options"
-msgstr "½ÐÒÕÔØâÕ ÞßæØøÕ"
-
-#: ../../any.pm_.c:679
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "¼ÞÖÕâÕ ÝÐÒÕáâØ úÕÓÞÒÕ ÞßæØøÕ ×Ð ÜÞÔãÛ %s."
-
-#: ../../any.pm_.c:685
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"¼ÞÖÕâÕ ÝÐÒÕáâØ úÕÓÞÒÕ ÞßæØøÕ ×Ð ÜÞÔãÛ %s.\n"
-"¾ßæØøÕ áã ã äÞàÜÐâã ``ØÜÕ=ÒàÕÔÝÞáâ ØÜÕ2=ÒàÕÔÝÞáâ2 ...''.\n"
-"½Ð ßàØÜÕà, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:688
-msgid "Module options:"
-msgstr "¾ßæØøÕ ÜÞÔãÛÐ:"
-
-#: ../../any.pm_.c:699
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"¿ÞÔØ×ÐúÕ ÜÞÔãÛÐ %s ÝÕãáßÕÛÞ.\n"
-"´Ð ÛØ ÖÕÛØâÕ ßÞÚãèÐâÕ ßÞÝÞÒÞ áÐ ÔàãÓØÜ ßÐàÐÜÕâàØÜÐ ?"
-
-#: ../../any.pm_.c:717
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s ÒÕû ßÞáâÞøØ)"
-
-#: ../../any.pm_.c:721
-msgid "This password is too simple"
-msgstr "¾ÒÐ ÛÞ×ØÝÚÐ øÕ ßàÕÒØèÕ ßàÞáâÐ"
-
-#: ../../any.pm_.c:722
-msgid "Please give a user name"
-msgstr "¾ÔàÕÔØâÕ ÚÞàØáÝØçÚÞ ØÜÕ"
-
-#: ../../any.pm_.c:723
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "ºÞàØáÝØçÚÞ ØÜÕ ÜÞÖÕ áÐÔàÖÐâØ áÐÜÞ ÜÐÛÐ áÛÞÒÐ, ÑàÞøÕÒÕ, `-' Ø `_'"
-
-#: ../../any.pm_.c:724
-msgid "This user name is already added"
-msgstr "¾ÒÞ ÚÞàØáÝØçÚÞ ØÜÕ ÒÕû ßÞáâÞøØ"
-
-#: ../../any.pm_.c:728
-msgid "Add user"
-msgstr "´ÞÔÐø ÚÞàØáÝØÚÐ"
-
-#: ../../any.pm_.c:729
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"ÃÝÕáØ ÚÞàØáÝØÚÐ\n"
-"%s"
-
-#: ../../any.pm_.c:730
-msgid "Accept user"
-msgstr "¿àØåÒÐâØ ÚÞàØáÝØÚÐ"
-
-#: ../../any.pm_.c:741
-msgid "Real name"
-msgstr "¿àÐÒÞ ØÜÕ"
-
-#: ../../any.pm_.c:742 ../../printerdrake.pm_.c:417
-#: ../../printerdrake.pm_.c:496
-msgid "User name"
-msgstr "ºÞàØáÝØçÚÞ ØÜÕ"
-
-#: ../../any.pm_.c:745
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:747
-msgid "Icon"
-msgstr "¸ÚÞÝa"
-
-#: ../../any.pm_.c:769
-msgid "Autologin"
-msgstr "°ãâÞ ÛÞÓÞÒaúe"
-
-#: ../../any.pm_.c:770
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ja ÜÞÓã ßÞÔÕáâØ ÒÐè àÐçãÝÐà ÔÐ ÐãâÞÜÐâáÚØ ãÛÞÓãje jeÔÝÞÓ ÚÞàØáÝØÚa.\n"
-"ÃÚÞÛØÚÞ ÝÕ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ ÞÒã ÞßæØjã, ÚÛØÚÝØâÕ ÝÐ  âÐáâÕà ßÞÝØèâØ"
-"(cancel) ?"
-
-#: ../../any.pm_.c:774
-msgid "Choose the default user:"
-msgstr "¸×ÐÑÕàØâÕ default (ÞáÝÞÒÝÞÓ) ÚÞàØáÝØÚa:"
-
-#: ../../any.pm_.c:775
-msgid "Choose the window manager to run:"
-msgstr "¸×ÐÑÕàØâÕ window ÜÕÝÐÔ×Õà ÚÞjØ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ:"
-
-#: ../../any.pm_.c:784
-msgid "Please, choose a language to use."
-msgstr "¸·ÐÑÕàØâÕ ÚÞjØ jÕ×ØÚ ÖÕÛØâÕ ÔÐ ÚÞàØáØâØâÕ:"
-
-#: ../../any.pm_.c:786
-msgid "You can choose other languages that will be available after install"
-msgstr "¼ÞÖÕâÕ Ø×ÐÑàÐâØ ÔàãÓØ jÕ×ØÚ ÚÞjØ ûÕ ÑØâØ ÔÞáâãßÐÝ ßÞáÛÕ ØÝáâÐÛÐæØje "
-
-#: ../../any.pm_.c:798 ../../install_steps_interactive.pm_.c:663
-msgid "All"
-msgstr "ÁÒe"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Dobrodosli u %s, menadzer zÐ startanje operativnih sistema !\n"
-"\n"
-"Izaberite operativni sistem, ili\n"
-"sacekate %d sekundi za startanje pretpostavljenog OS.\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:837
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Dobrodosli u GRUB  starter operativnog sistema !"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:840
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Koristi  %c i %c slova da bi oznacili izbor"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:843
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite enter za podizanje izabranog OS,'e' za promenu "
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:846
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandi pri  podizanju sistema,ili  'c' za komandnu liniju "
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:849
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Oznaceni izbor se podize automatski za %d sekundi"
-
-#: ../../bootloader.pm_.c:853
-msgid "not enough room in /boot"
-msgstr "ÝÕÜÐ ÔÞÒÞùÝÞ ÜÕáâÐ ã /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:953
-msgid "Desktop"
-msgstr "´ÕáÚâÞß"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:955
-msgid "Start Menu"
-msgstr "ÁâÐàâ ÜÕÝØ "
-
-#: ../../bootloader.pm_.c:974
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "³ÔÕ ÑØáâÕ ÔÐ ØÝáâÐÛØàÐâÕ áâÐàâÕà?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ßÞÜÞû jÞè ÝØjÕ ØÜßÛÕÜÕÝâØàÐÝÐ.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "KÞÝäØÓãàÐæØøa áâØÛÐ áâÐàâaúa"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_´ÐâÞâÕÚa"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/´ÐâÞâÕÚa/_¸×ÛÐ×"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle ¼ÞÝØâÞà ×Ð ÚÐâÕÓÞàØ×ÐæØjã"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle ¼ÞÝØâÞà"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "ÂàÐÔØæØÞÝÐÛÝØ ¼ÞÝØâÞà"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "ÂàÐÔØæØÞÝÐÛÝØ Gtk+ ¼ÞÝØâÞà"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "¿ÞÚàÕÝØ °ãàÞàã ßàØ áâÐàâaúe"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Lilo/Grub ÜÞÔ"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"ÂàÕÝãâÝÞ ÚÞàØáâØâÕ %s ÚÐÞ Boot ÜÕÝÐÿÕà \n"
-"ºÛØÚÝØâÕ ÝÐ ¿ÞÔÕáØ (Configure) ÔÐ ÑØ ßÞÚàÕÝãÛØ ßÞÔeèÐÒÐÒÐúÕ."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:644
-#: ../../standalone/draknet_.c:283 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "¿ÞÔÕáØ"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "ÁâÐàâÝØ ÜÞÔ"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "ÁØáâÕÜáÚØ ÜÞÔ"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "¿ÞÚàÕÝØ X-Window áØáâÕÜ ßàØ áâàÐâaúã"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "½Õ, ja ÝÕ ÖÕÛØÜ ÐãâÞÛÞÓÞÒaúe"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "´Ð, jÐ ÖÕÛØÜ ÐãâÞÛÞÓÞÒaúe áÐ ÞÒØÜ(ÚÞàØáÝØÚ,ÔÕáÚâÞß)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:211
-#: ../../standalone/draknet_.c:323 ../../standalone/draknet_.c:439
-#: ../../standalone/draknet_.c:517 ../../standalone/draknet_.c:560
-#: ../../standalone/draknet_.c:661
-msgid "OK"
-msgstr "Ã àÕÔã"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:518
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:288
-#: ../../interactive.pm_.c:310 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:421 ../../my_gtk.pm_.c:424 ../../my_gtk.pm_.c:721
-#: ../../printerdrake.pm_.c:1188 ../../standalone/drakautoinst_.c:203
-#: ../../standalone/drakgw_.c:649 ../../standalone/draknet_.c:115
-#: ../../standalone/draknet_.c:147 ../../standalone/draknet_.c:316
-#: ../../standalone/draknet_.c:533 ../../standalone/draknet_.c:675
-#: ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "¾ÑãáâÐÒØ"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ÝÕ ÜÞÓã ÞâÒÞàØâØ /etc/inittab ×Ð çØâaúe: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "¸ÝáâÐÛÐæØøÐ LILO-Ð ÝÕãáßÕÛÐ. ³àÕèÚÐ øÕ:"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d ÜØÝãâa"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 ÜØÝãâ"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d áÕÚãÝÔØ"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "¼ÞÛØÜ ÒÐá, ßàÒÞ ÝÐßàÐÒØâÕ ÚÞßØøã ÒÐèØå ßÞÔÐâÐÚÐ"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:803
-#: ../../diskdrake_interactive.pm_.c:812 ../../diskdrake_interactive.pm_.c:866
-msgid "Read carefully!"
-msgstr "¿°¶©¸²¾ ¿À¾Ç¸Â°¨ !"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"ÃÚÞÛØÚÞ ßÛÐÝØàÐâÕ ÔÐ ÚÞàØáâØâÕ  aboot, ÞáâÐÒØâe ßàÐ×ÐÝ ßàÞáâÞà (2048 "
-"áÕÚâÞàÐÝÐ ßÞçÕâÚã \n"
-"ÔØáÚÐ)"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:315
-#: ../../diskdrake_interactive.pm_.c:330 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:340 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "³àÕèÚÐ"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "çÐàÞÑúÐÚ (ßÞÜÞûÝØÚ)"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "½ÞÒØ"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "ÃÔÐùÕÝØ àÕÔ:"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:482
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:525
-msgid "Mount point"
-msgstr "ÂÐçÚÐ ÜÞÝâØàÐúÐ"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "¾ßæØje"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:420
-#: ../../diskdrake.pm_.c:537 ../../diskdrake_interactive.pm_.c:355
-#: ../../diskdrake_interactive.pm_.c:490
-msgid "Type"
-msgstr "ÂØß"
-
-#: ../../diskdrake.pm_.c:225 ../../diskdrake_interactive.pm_.c:363
-msgid "Unmount"
-msgstr "´ÕÜÞÝâØàÐø"
-
-#: ../../diskdrake.pm_.c:226 ../../diskdrake_interactive.pm_.c:359
-msgid "Mount"
-msgstr "¼ÞÝâØàÐø"
-
-#: ../../diskdrake.pm_.c:231
-msgid "Choose action"
-msgstr "¸×ÐÑÕàØâÕ ÐÚæØøã"
-
-#: ../../diskdrake.pm_.c:238
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"´ØáÚ áÐÔàÖØ øÕÔÝã ÒÕÛØÚã FAT ßÐàâØæØøã\n"
-"(ãÓÛÐÒÝÞÜ øÕ ÚÞàØáâÕ MicroSoft Dos/Windows-Ø, ÝÐ ÖÐÛÞáâ).\n"
-"¿àÕÔÛÐÖÕÜ ÔÐ ßàÒÞ Ø×ÜÕÝØâÕ ÒÕÛØçÝã (resize) âÕ ßÐàâØæØøÕ (ÚÛØÚÝØâÕ ÝÐ úã,\n"
-"Ð ßÞâÞÜ ÝÐ \"¿àÞÜÕÝØ ÒÕÛØçØÝã\")"
-
-#: ../../diskdrake.pm_.c:241
-msgid "Please click on a partition"
-msgstr "ºÛØÚÝØâÕ ÝÐ ßÐàâØæØøã"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid "Please click on a media"
-msgstr "ºÛØÚÝØâÕ ÝÐ ßÐàâØæØøã"
-
-#: ../../diskdrake.pm_.c:246
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "ºÛØÚÝØâÕ ÝÐ ßÐàâØæØøã"
-
-#: ../../diskdrake.pm_.c:247
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:266 ../../install_steps_gtk.pm_.c:519
-msgid "Details"
-msgstr "´ÕâÐùØ"
-
-#: ../../diskdrake.pm_.c:398
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:398
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:398
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:398
-#, fuzzy
-msgid "Journalised FS"
-msgstr "ÜÞÝâØàÐúÕ ÝØøÕ ãáßÕÛÞ"
-
-#: ../../diskdrake.pm_.c:398
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:398
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:399 ../../diskdrake_interactive.pm_.c:954
-msgid "Empty"
-msgstr "¿àÐ×ÝÞ"
-
-#: ../../diskdrake.pm_.c:399 ../../install_steps_gtk.pm_.c:375
-#: ../../install_steps_gtk.pm_.c:435 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "´àãÓÞ"
-
-#: ../../diskdrake.pm_.c:403
-msgid "Filesystem types:"
-msgstr "²àáâÐ äÐøÛ áØáâÕÜÐ:"
-
-#: ../../diskdrake.pm_.c:420 ../../diskdrake_interactive.pm_.c:377
-msgid "Create"
-msgstr "ºàÕØàÐø"
-
-#: ../../diskdrake.pm_.c:420 ../../diskdrake.pm_.c:422
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "ÃÜÕáâÞ âÞÓÐ ßàÞÑÐøâÕ ``%s''"
-
-#: ../../diskdrake.pm_.c:422 ../../diskdrake_interactive.pm_.c:364
-msgid "Delete"
-msgstr "¾ÑàØèØ"
-
-#: ../../diskdrake.pm_.c:426
-msgid "Use ``Unmount'' first"
-msgstr "¿àÒÞ ãàÐÔØâÕ ``´ÕÜÞÝâØàÐø''"
-
-#: ../../diskdrake.pm_.c:427 ../../diskdrake_interactive.pm_.c:482
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"¿ÞáÛÕ ßàÞÜÕÝÕ âØßÐ ßÐàâØæØje %s, áÒØ ßÞÔÐæØ ÝÐ ÞÒÞø ßÐàâØæØøØ ûÕ ÑØâØ "
-"Ø×ÑàØáÐÝØ"
-
-#: ../../diskdrake.pm_.c:481 ../../diskdrake_interactive.pm_.c:524
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "³ÔÕ ÑØáâÕ ÔÐ ÜÞÝâØàÐâÕ %s ãàÕòÐø ?"
-
-#: ../../diskdrake.pm_.c:503
-#, fuzzy
-msgid "Mount options"
-msgstr "¾ßæØøÕ ÜÞÔãÛÐ:"
-
-#: ../../diskdrake.pm_.c:510
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:528
-#, fuzzy
-msgid "Removable media"
-msgstr "°ãâÞÜÞÝâØàÐúÕ ßàÕÝÞáØÒØå ÜÕÔØøÐ"
-
-#: ../../diskdrake.pm_.c:535
-#, fuzzy
-msgid "Change type"
-msgstr "¿àÞÜÕÝÐ âØßÐ ßÐàâØæØøÕ"
-
-#: ../../diskdrake.pm_.c:536 ../../diskdrake_interactive.pm_.c:489
-msgid "Which filesystem do you want?"
-msgstr "ºÞøã  ÔÐâÞâÕçÝØ áØáâÕÜ ÖÕÛØâÕ ?"
-
-#: ../../diskdrake.pm_.c:567
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:572
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:584 ../../diskdrake.pm_.c:654
-msgid "Server"
-msgstr "ÁÕàÒÕà"
-
-#: ../../diskdrake.pm_.c:585 ../../diskdrake.pm_.c:655
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:618
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:629 ../../diskdrake.pm_.c:642
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "¸×ÐÑÕàØâÕ ÐÚæØøã"
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose another partition"
-msgstr "ºàÕØàÐø ÝÞÒã ßÐàâØæØøã"
-
-#: ../../diskdrake_interactive.pm_.c:188
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "¿àÕòØ ÝÐ ÕÚáßÕàâ ÜÞÔ"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "¿àÕòØ ÝÐ ÝÞàÜÐÛÝØ ÜÞÔ"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "¿ÞÝØèâØ àÐÔúã"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "ÁÒÕøÕÔÝÞ ÝÐáâÐÒØâØ ?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "ºàÐø ÑÕ× áÝØÜÐúÐ ßàÞÜÕÝÐ"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "ºàÐø ÑÕ× áÝØÜÐúÐ ßàÞÜÕÝÐ ã âÐÑÕÛÕ ßÐàâØæØøÐ?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "´Ð ÛØ åÞûÕâÕ ÔÐ âÕáâØàÐâÕ ÚÞÝäØÓãàÐæØøã?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "°ãâÞ ÔØáÛÞæØàÐúÕ"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "¾çØáâØ áÒÕ"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:201
-msgid "More"
-msgstr "JÞè"
-
-#: ../../diskdrake_interactive.pm_.c:250
-#, fuzzy
-msgid "Hard drive information"
-msgstr "´ÕâÕÚæØøÐ åÐàÔ ÔØáÚa"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "½ÕÜÐ ÔÞÒÞùÝÞ áÛÞÑÞÔÝÞÓ ßàÞáâÞàÐ ×Ð ÕÐãâÞ-ÐÛÞæØàaúÕ"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "ÁÒÕ ßàØÜÐàÝÕ ßÐàâØæØøÕ áã ×Ðã×ÕâÕ"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "½Õ ÜÞÓã ÔÞÔÐâØ ÒØèÕ ÝØ øÕÔÝã ßÐàâØæØøã"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"´Ð ÑØ ÞÜÞÓãûØÛØ ÚàÕØàÐúÕ øÞè (extended) ßÐàâØæØøÐ Ø×ÑàØèØâÕ øÕÔÝã ÞÔ "
-"ßÞáâÞøÕûØå"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "ÃßØèØ âÐÑÕÛã ßÐàâØæØøÐ"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "ÁßÐáØ âÐÑÕÛã ßÐàâØæØøÐ"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "ÁßÐáØ âÐÑÕÛã ßÐàâØæØøÐ"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "ÁßÐáØ âÐÑÕÛã ßÐàâØæØøÐ"
-
-#: ../../diskdrake_interactive.pm_.c:294
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "°ãâÞÜÞÝâØàÐúÕ ßàÕÝÞáØÒØå ÜÕÔØøÐ"
-
-#: ../../diskdrake_interactive.pm_.c:303 ../../diskdrake_interactive.pm_.c:323
-msgid "Select file"
-msgstr "¸×ÐÑÕàØâÕ ÔÐâÞâÕÚã"
-
-#: ../../diskdrake_interactive.pm_.c:310
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"¿ÞåàaúÕÝa(áÝØÜùÕÝÐ) âÐÑÕÛÐ ßÐàâØæØøÐ ÝØøÕ ØáâÕ ÒÕÛØçØÝÕ\n"
-"¶ÕÛØâÕ ÔÐ ÝÐáâÐÒØâÕ ?"
-
-#: ../../diskdrake_interactive.pm_.c:324
-msgid "Warning"
-msgstr "ÃßÞ×ÞàÕúÕ"
-
-#: ../../diskdrake_interactive.pm_.c:325
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"ÃÑÐæØâÕ ÔØáÚÕâã ã ãàÕòÐø\n"
-"ÁÒØ ßÞÔÐæØ ÝÐ ÔØáÚÕâØ ûÕ ÑØâØ Ø×ÑàØáÐÝØ !"
-
-#: ../../diskdrake_interactive.pm_.c:336
-msgid "Trying to rescue partition table"
-msgstr "ÁßÐáÐÒÐúÕ âÐÑÕÛÕ ßÐàâØæØøÐ"
-
-#: ../../diskdrake_interactive.pm_.c:342
-#, fuzzy
-msgid "Detailed information"
-msgstr "¿àØÚÐÖØ ØÝäÞàÜÐæØøÕ"
-
-#: ../../diskdrake_interactive.pm_.c:356 ../../diskdrake_interactive.pm_.c:592
-msgid "Resize"
-msgstr "¿àÞÜÕÝØ ÒÕÛØçØÝã"
-
-#: ../../diskdrake_interactive.pm_.c:357 ../../diskdrake_interactive.pm_.c:632
-msgid "Move"
-msgstr "¿àÕÜÕáâØ"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Format"
-msgstr "ÄÞàÜÐâØàÐúÕ"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Active"
-msgstr "°ÚâØÒØàÐø"
-
-#: ../../diskdrake_interactive.pm_.c:361
-msgid "Add to RAID"
-msgstr "´ÞÔÐø ÝÐ RAID"
-
-#: ../../diskdrake_interactive.pm_.c:362
-msgid "Add to LVM"
-msgstr "´ÞÔÐø ÝÐ LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Remove from RAID"
-msgstr "ÃÚÛÞÝØ áÐ RAID-Ð"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Remove from LVM"
-msgstr "ÃÚÛÞÝØ áÐ LVM-Ð"
-
-#: ../../diskdrake_interactive.pm_.c:367
-msgid "Modify RAID"
-msgstr "¿àÞÜÕÝØ RAID"
-
-#: ../../diskdrake_interactive.pm_.c:368
-msgid "Use for loopback"
-msgstr "ºÞàØáâØ ×Ð loopback"
-
-#: ../../diskdrake_interactive.pm_.c:411
-msgid "Create a new partition"
-msgstr "ºàÕØàÐø ÝÞÒã ßÐàâØæØøã"
-
-#: ../../diskdrake_interactive.pm_.c:414
-msgid "Start sector: "
-msgstr "¿ÞçÕâÝØ áÕÚâÞà: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:734
-msgid "Size in MB: "
-msgstr "²ÕÛØçØÝÐ ã MB:"
-
-#: ../../diskdrake_interactive.pm_.c:417 ../../diskdrake_interactive.pm_.c:735
-msgid "Filesystem type: "
-msgstr "²àáâÐ âÐâÞâeçÝÞg áØáâÕÜÐ:"
-
-#: ../../diskdrake_interactive.pm_.c:418 ../../diskdrake_interactive.pm_.c:938
-#: ../../diskdrake_interactive.pm_.c:1012
-msgid "Mount point: "
-msgstr "ÂÐçÚÐ ÜÞÝâØàÐúÐ: "
-
-#: ../../diskdrake_interactive.pm_.c:422
-msgid "Preference: "
-msgstr "ºÐàÐÚâÕàØáâØÚÕ: "
-
-#: ../../diskdrake_interactive.pm_.c:464
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "ÄÞàÜÐâØàÐúÕ loopback ÔÐâÞâÕÚe %s"
-
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Change partition type"
-msgstr "¿àÞÜÕÝÐ âØßÐ ßÐàâØæØøÕ"
-
-#: ../../diskdrake_interactive.pm_.c:493
-msgid "Switching from ext2 to ext3"
-msgstr "¼ÕúÐÜ ext2 ÝÐ ext3"
-
-#: ../../diskdrake_interactive.pm_.c:523
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "³ÔÕ ÑØáâÕ ÔÐ ÜÞÝâØàÐâÕ loopback ÔÐâÞâÕÚã  %s?"
-
-#: ../../diskdrake_interactive.pm_.c:530
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"´ÕÜÞÝâØàaúe ÝØjÕ ÜÞÓãûÕ,jÕà áÕ ßÐàâØæØjÐ ÚÞàØáØâØ ×Ð loop back.\n"
-"¿àÒÞ ãÚÛÞÝØâÕ loopback"
-
-#: ../../diskdrake_interactive.pm_.c:551
-msgid "Computing FAT filesystem bounds"
-msgstr "¿àÞàÐçãÝÐÒÐÜ ÓàÐÝØæÕ FAT ÔÐâÞâeçÝÞÓ áØáâÕÜÐ"
-
-#: ../../diskdrake_interactive.pm_.c:551 ../../diskdrake_interactive.pm_.c:607
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "¿àÞÜÕÝÐ ÒÕÛØçØÝÕ (resizing)"
-
-#: ../../diskdrake_interactive.pm_.c:580
-msgid "This partition is not resizeable"
-msgstr "¾ÒÞj ßÐàâØæØæØ ÝØjÕ ÜÞÓãûe ßàÞÜÕÝØâØ ÒÕÛØçØÝã"
-
-#: ../../diskdrake_interactive.pm_.c:585
-msgid "All data on this partition should be backed-up"
-msgstr "CÒØ ßÞÔÐæØ ÝÐ ÞÒÞø ßÐàâØæØøØ ÑØ âàÕÑÐÛØ ÑØâØ áaçãÒÐÝØ"
-
-#: ../../diskdrake_interactive.pm_.c:587
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "¿ÞáÛÕ ßàÞÜÕÝÕ ÒÕÛØçØÝe %s ßÐàâØæØjÕ áÒØ ßÞÔÐæØ ûÕ ÑØâØ Ø×ÑàØáÐÝØ"
-
-#: ../../diskdrake_interactive.pm_.c:592
-msgid "Choose the new size"
-msgstr "¸×ÐÑÕàØâÕ ÝÞÒã ÒÕÛØçØÝã"
-
-#: ../../diskdrake_interactive.pm_.c:593
-#, fuzzy
-msgid "New size in MB: "
-msgstr "²ÕÛØçØÝÐ ã MB:"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which disk do you want to move it to?"
-msgstr "ºÞøØ ÔØáÚ ÖÕÛØâÕ ÔÐ ßàÕÜÕáâØâÕ?"
-
-#: ../../diskdrake_interactive.pm_.c:634
-msgid "Sector"
-msgstr "ÁÕÚâÞà"
-
-#: ../../diskdrake_interactive.pm_.c:635
-msgid "Which sector do you want to move it to?"
-msgstr "³ÔÕ ÖÕÛØâe ÔÐ ØÝáâÐÛØàÐâÕ áâÐàâÕà?"
-
-#: ../../diskdrake_interactive.pm_.c:638
-msgid "Moving"
-msgstr "¿àÕÜÕèâÐúÕ"
-
-#: ../../diskdrake_interactive.pm_.c:638
-msgid "Moving partition..."
-msgstr "¿àÕÜÕèâÐúÕ ßÐàâØæØøÕ..."
-
-#: ../../diskdrake_interactive.pm_.c:659
-msgid "Choose an existing RAID to add to"
-msgstr "¸×ÐÑÕàØ ßÞáâÞøÕûØ RAID ×Ð ÔÞÔÐÒÐúÕ"
-
-#: ../../diskdrake_interactive.pm_.c:660 ../../diskdrake_interactive.pm_.c:678
-msgid "new"
-msgstr "ÝÞÒØ"
-
-#: ../../diskdrake_interactive.pm_.c:676
-msgid "Choose an existing LVM to add to"
-msgstr "¸×ÐÑÕàØ ßÞáâÞøÕûØ LVM ×Ð ÔÞÔÐÒÐúÕ"
-
-#: ../../diskdrake_interactive.pm_.c:681
-msgid "LVM name?"
-msgstr "LVM ØÜÕ?"
-
-#: ../../diskdrake_interactive.pm_.c:720
-msgid "This partition can't be used for loopback"
-msgstr "¾ÒÐ ßÐàâØæØøÐ ÝÕ ÜÞÖÕ ÑØâØ ÚÞàØèûÕÝÐ ×Ð loopback "
-
-#: ../../diskdrake_interactive.pm_.c:732
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:733
-msgid "Loopback file name: "
-msgstr "¸ÜÕ Loopback ÔÐâÞâÕÚe: "
-
-#: ../../diskdrake_interactive.pm_.c:738
-#, fuzzy
-msgid "Give a file name"
-msgstr "¿àÐÒÞ ØÜÕ"
-
-#: ../../diskdrake_interactive.pm_.c:741
-msgid "File already used by another loopback, choose another one"
-msgstr "ÄÐjÛ áÕ ÒÕû ÚÞàØáâØ ÞÔ áâàÐÝÕ ÔàãÓÞÓ loopback-Ð,Ø×ÐÑÕàØâÕ ÔàãÓØ"
-
-#: ../../diskdrake_interactive.pm_.c:742
-msgid "File already exists. Use it?"
-msgstr "´ÐâÞâÕÚa ÒÕû ßÞáâÞøØ.´Ð ÛØ ÔÐ ÓÐ ÚÞàØáâØÜ ?"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "device"
-msgstr "ãàÕòÐø"
-
-#: ../../diskdrake_interactive.pm_.c:787
-msgid "level"
-msgstr "ÝØÒÞ"
-
-#: ../../diskdrake_interactive.pm_.c:788
-msgid "chunk size"
-msgstr "chunk ÒÕÛØçØÝÐ"
-
-#: ../../diskdrake_interactive.pm_.c:803
-msgid "Be careful: this operation is dangerous."
-msgstr "¿°¶©¸²¾,ÞÒÐ ÞßÕàÐæØøÐ jÕ ÞßÐáÝÐ."
-
-#: ../../diskdrake_interactive.pm_.c:818
-msgid "What type of partitioning?"
-msgstr "ºÞøã Òàáâã ßÐàâØæØÞÝØàaúa?"
-
-#: ../../diskdrake_interactive.pm_.c:836
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"½ØøÕ ÜÞÓãûÕ ÚàÕØàÐâØ /boot ×Ð áÐÔÐ ÝÐ åÐàÔ ÔØáÚã (ÝÐ æØÛØÝÔàã > 1024).\n"
-"¸ÛØ ÚÞàØáâØâÕ LILO ÚÞøØ ÝÕ àÐÔØ, ØÛØ ÓÐ ÝÕ ÚÞàØáâØâÕ ßÐ ÒÐÜ ÝÕ âàÕÑÐ /boot"
-
-#: ../../diskdrake_interactive.pm_.c:840
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"¿ÐàâØæØøÐ ÚÞøã áâÕ Ø×ÐÑàÐÛØ ×Ð root (/) øÕ äØ×ØçÚØ ÛÞæØàÐÝÐ Ø×ÝÐÔ\n"
-"1024-âÞÓ æØÛØÝÔàÐ åÐàÔ ÔØáÚÐ,Ø ÝÕÜÐâÕ /boot ßÐàâØæØøã.\n"
-"ÃÚÞÛØÚÞ ßÛÐÝØàÐâÕ ÔÐ ÚÞàØáØâØâÕ LILO boot ÜÕÝÐÔÖÕà, ÜÞàÐâÕ\n"
-"ÔÞÔÐâØ /boot ßÐàâØæØøØ."
-
-#: ../../diskdrake_interactive.pm_.c:846
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"¸×ÐÑàÐÛØ áâÕ áÞäâÒÕàáÚã RAID ßÐàâØæØjã ÚÐÞ root (/).\n"
-"½ØjÕÔÐÝ áâÐàâÕà ÝÕ ÜÞÖÕ ÔÐ àÐÔØ áÐ âØÜ ÑÕ× /boot ßÐàâØæØje.\n"
-"·ÐâÞ ßÐ×ØâÕ Ôa ÔÞÔÐâÕ /boot ßÐàâØæØjã"
-
-#: ../../diskdrake_interactive.pm_.c:866
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "ÂÐÑÕÛÐ ßÐàâØæØøÐ ×Ð ãàÕòÐø %s ûÕ ÑØâØ ×ÐßØáÐÝÐ ÝÐ ÔØáÚ!"
-
-#: ../../diskdrake_interactive.pm_.c:870
-msgid "You'll need to reboot before the modification can take place"
-msgstr "¼ÞàÐâÕ àÕáâÐàâÞÒÐâØ àÐçãÝÐà ÔÐ ÑØ áÕ Ø×ÜÕÝÕ Ø×ÒàèØÛÕ"
-
-#: ../../diskdrake_interactive.pm_.c:881
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"¿ÞáÛÕ äÞàÜÐâØàaúa ßÐàâØæØje %s,áÒØ ßÞÔÐæØ ÝÐ ÞÒÞø ßÐàâØæØøØ ûÕ ÑØâØ Ø×ÑàØáÐÝØ"
-
-#: ../../diskdrake_interactive.pm_.c:883
-msgid "Formatting"
-msgstr "ÄÞàÜÐâØàÐúÕ"
-
-#: ../../diskdrake_interactive.pm_.c:884
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "ÄÞàÜÐâØàÐúÕ loopback ÔÐâÞâÕÚe %s"
-
-#: ../../diskdrake_interactive.pm_.c:885
-#: ../../install_steps_interactive.pm_.c:449
-#, c-format
-msgid "Formatting partition %s"
-msgstr "ÄÞàÜÐâØàÐúÕ ßÐàâØæØøÕ %s"
-
-#: ../../diskdrake_interactive.pm_.c:896
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid ÝÕãáßÕÛÞ"
-
-#: ../../diskdrake_interactive.pm_.c:896
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "½ÕÜÐ ÔÞÒÞùÝÞ áÛÞÑÞÔÝÞÓ ßàÞáâÞàÐ ×Ð ÐÛÞæØàaúÕ ÝÞÒØå ßÐàâØæØja"
-
-#: ../../diskdrake_interactive.pm_.c:897
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:908
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "½ÕÜÐ ÔÞÒÞùÝÞ áÛÞÑÞÔÝÞÓ ßàÞáâÞàÐ ×Ð ÐÛÞæØàaúÕ ÝÞÒØå ßÐàâØæØja"
-
-#: ../../diskdrake_interactive.pm_.c:912
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:916
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "ÀÕ×ÞÛãæØøÐ: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:939 ../../diskdrake_interactive.pm_.c:998
-msgid "Device: "
-msgstr "ÃàÕòÐø: "
-
-#: ../../diskdrake_interactive.pm_.c:940
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "¾×ÝÐÚÐ DOS ßÐàâØæØøÕ: %s (áÐÜÞ ßàÕâßÞáâÐÒÚÐ)\n"
-
-#: ../../diskdrake_interactive.pm_.c:944 ../../diskdrake_interactive.pm_.c:952
-#: ../../diskdrake_interactive.pm_.c:1016
-msgid "Type: "
-msgstr "ÃÝÕáØ: "
-
-#: ../../diskdrake_interactive.pm_.c:948
-msgid "Name: "
-msgstr "¸ÜÕ: "
-
-#: ../../diskdrake_interactive.pm_.c:956
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "¿ÞçÕâÐÚ: áÕÚâÞà %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid "Size: %s"
-msgstr "²ÕÛØçØÝÐ: %s"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s áÕÚâÞàÐ"
-
-#: ../../diskdrake_interactive.pm_.c:961
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "ÆØÛØÝÔÐà %d ÔÞ æØÛØÝÔàÐ %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Formatted\n"
-msgstr "ÄÞàÜÐâØàÐÝÞ\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-msgid "Not formatted\n"
-msgstr "½ØøÕ äÞàÜÐâØàÐÝÞ\n"
-
-#: ../../diskdrake_interactive.pm_.c:964
-msgid "Mounted\n"
-msgstr "¼ÞÝâØàÐÝÞ\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:967
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback äÐjÛ(ÞÒØ): %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Boot ßÐàâØæØøÐ ßÞ default-ã\n"
-"   (×Ð ßÞÔØ×ÐúÕ MS-DOSÐ, ÝÕ ×Ð lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "Level %s\n"
-msgstr "½ØÒÞ %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:971
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Chunk-ãø %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-ÔØáÚÞÒØ %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:974
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "¸Üe Loopback ÔÐâÞâÕÚe: %s"
-
-#: ../../diskdrake_interactive.pm_.c:977
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"½ÐjÒÕàÞÒÐâÝØjÕ je, ÔÐ jÕ ÞÒÐ ßÐàâØæØja\n"
-"Driver ßÐàâØæØja, ßÐ ÝÕÑØ âàÕÑÐÛØ\n"
-"ÔÐ jÕ ÔØàÐâe.\n"
-
-#: ../../diskdrake_interactive.pm_.c:980
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"¾ÒÞ jÕ áßÕæØjÐÛÝÐ Bootstrap\n"
-"ßÐàâØæØjÐ Ø ÚÞàØáâØ áe\n"
-"dual-booting ÒaèÕÓ áØáâÕÜa.\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-#, c-format
-msgid "Size: %s\n"
-msgstr "²ÕÛØçØÝÐ: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "³ÕÞÜÕâàØøÐ: %s æØÛØÝÔÐàÐ, %s ÓÛÐÒÐ, %s áÕÚâÞàÐ\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-msgid "Info: "
-msgstr "¸ÝäÞ: "
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-ÔØáÚÞÒØ %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1003
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "ÂØß âÐÑÕÛe ßÐàâØæØøÐ : %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1004
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "ÝÐ Ñãáã %d ID %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1018
-#, c-format
-msgid "Options: %s"
-msgstr "¾ßæØje: %s"
-
-#: ../../fs.pm_.c:454 ../../fs.pm_.c:464 ../../fs.pm_.c:468 ../../fs.pm_.c:472
-#: ../../fs.pm_.c:476 ../../fs.pm_.c:480
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ÄÞàÜÐâØàÐúÕ  %s ÝØøÕ ãáßÕÛÞ"
-
-#: ../../fs.pm_.c:513
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ÝÕ ×ÝÐÜ ÚÐÚÞ ÔÐ äÞàÜÐâØàÐÜ %s ã âØßã %s"
-
-#: ../../fs.pm_.c:575
-msgid "mount failed"
-msgstr "ÜÞÝâØàÐúÕ ÝØøÕ ãáßÕÛÞ"
-
-#: ../../fs.pm_.c:595
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck ßàÞÒÕàÐ ÝØøÕ ãáßÕÛÐ áÐ ÚÞÔÞÜ %d ØÛØ áØÓÝÐÛÞÜ %d"
-
-#: ../../fs.pm_.c:604 ../../fs.pm_.c:610 ../../partition_table.pm_.c:579
-msgid "mount failed: "
-msgstr "ÜÞÝâØàÐúÕ ÝØøÕ ãáßÕÛÞ: "
-
-#: ../../fs.pm_.c:625 ../../partition_table.pm_.c:575
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "³àÕèÚÐ ßàØ ÔÕÜÞÝâØàÐúã %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jÕÔÝÞáâÐÒÝÞ"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "áÕàÒÕà"
-
-#: ../../fsedit.pm_.c:465
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "½e ÜÞÖÕâÕ ÚÞàØáâØâØ JFS ×Ð ßÐàâØæØjÕ ÜÐúÕ ÞÔ 16MB"
-
-#: ../../fsedit.pm_.c:466
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "½e ÜÞÖÕâÕ ÚÞàØáâØâØ ReiserFS ×Ð ßÐàâØæØjÕ ÜÐúÕ ÞÔ 32MB"
-
-#: ../../fsedit.pm_.c:475
-msgid "Mount points must begin with a leading /"
-msgstr "ÂÐçÚÕ ÜÞÝâØàÐúÐ ÜÞàÐøã ÔÐ ßÞçØúã áÐ ÒÞÔÕûØÜ /"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "²Õû ßÞáâÞøØ ßÐàâØæØøÐ áÐ âÐçÚÞÜ ÜÞÝâØàÐúÐ %s\n"
-
-#: ../../fsedit.pm_.c:480
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "½Õ ÜÞÖÕâÕ ÚÞàØáâØâØ ÛÞÓØçÚã LVM ßÐàâØæØjã ×Ð âaçÚã ÜÞÝâØàaúÐ %s"
-
-#: ../../fsedit.pm_.c:482
-msgid "This directory should remain within the root filesystem"
-msgstr "¾ÒÐj ÔØàÕÚâÞàØjãÜ âàÕÑÐ ÔÐ ÞáâÐÝÕ ã root-ã  ÔÐâÞâeçÝÞÓ áØáâÕÜa"
-
-#: ../../fsedit.pm_.c:484
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"¿ÞâàÕÑÐÝ ÒÐÜ jÕ ßàÐÒØ ÔÐâÞâeçÝØ áØáâÕÜ (ext2, reiserfs) ×Ð ÞÒã âaçÚã "
-"ÜÞÝâØàÐúa\n"
-
-#: ../../fsedit.pm_.c:600
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "³àÕèÚÐ ßàØ ÞâÒÐàÐúã %s ×Ð ØáßØá: %s"
-
-#: ../../fsedit.pm_.c:685
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"´ÞÓÞÔØÛÐ áÕ ÓàÕèÚÐ - ÝØøÕ ÝÐòÕÝ ØáßàÐÒÐÝ ãàÕòÐø ÝÐ ÚÞøÕÜ ÑØ ÑØÛØ ÚàÕàÐÝØ "
-"ÝÞÒØ ÔÐâÞâeçÝÞÓ áØáâÕÜØ. ¿àÞÒÕàØâÕ ÒÐè åÐàÔÒÕà ÔÐ ÒØÔØâÕ èâÐ øÕ ã×àÞÚ ÞÒÞÓ "
-"ßàÞÑÛÕÜÐ."
-
-#: ../../fsedit.pm_.c:708
-msgid "You don't have any partitions!"
-msgstr "½ÕÜÐâÕ ÝØøÕÔÝã ßÐàâØæØøã!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"¸×ÝÐÔ áÕ ÝÐÛÐ×Ø ÛØáâÐ ßÞáâÞjeûØå Linux ßÐàâØæØja ÚÞjÕ áã ÔÕâÕÚâÞÒÐÝe\n"
-"ÝÐ åÐàÔ ÔØáÚã. ¼ÞÖÕâÕ ×ÐÔàÖÐâØ Ø×ÑÞà ÚÞjØ jÕ ÝÐßàÐÒØÞ çÐàÞÑúÐÚ, jÕà jÕ ÔÞÑÐà "
-"×a a\n"
-"Þßèâã ãßÞâàÕÑã. ÃÚÞÛØÚÞ ßàÞÜÕÝØâÕ Ø×ÑÞà, ÜÞàÐâÕ ÑÐà Ø×ÐÑàÐâØ root\n"
-"ßÐàâØæØjã (\"/\"). ½ÕÜÞjâÕ ÔÐ ÑØàÐâÕ áãÒØèÕ ÜÐÛã ßÐàâØæØjã jÕà ÝeûÕâÕ ÜÞûØ "
-"Ôa\n"
-"ØÝáâÐÛØàÐâÕ ÞÒÞùÝÞ áÞäâÒÕàa. ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ßÞÔÐâÚÕ áâÐÒØùaâÕ ÝÐ ßÞáÕÑÝã "
-"ßÐàâØæØjã ,\n"
-"ÜÞàÐâÕ ÔÐ Ø×ÐÑÕàÕâÕØ Ø \"/home\" (ÜÞÓãûÕ jÕ ãÚÞÛØÚÞ ØÜÐâÕ ÒØèÕ ÞÔ jÕÔÝÕ\n"
-"Linux ßÐàâØæØje).\n"
-"\n"
-"\n"
-"¸ÝäÞàÜÐæØjÐ: áÒÐÚÐ ßÐàâØæØjÐ jÕ ßàØÚÐ×ÐÝa ÝÐ áÛÕÔeûØ ÝaçØÝ: \"¸Üe\", "
-"\"ºÐßÐæØâÕâ\".\n"
-"\n"
-"\n"
-"\"¸ÜÕ\" je ÚÞÔØàÐÝÞ ÝÐ áÛÕÔeûØ ÝaçØÝ: \"âØß åÐàÔ ÔØáÚa\", \"ÑàÞj åÐàÔ ÔØáÚa"
-"\",\n"
-"\"ßàÞj ßÐàâØæØje\" (ÝÐ ßàØÜÕà, \"hda1\").\n"
-"\n"
-"\n"
-"\"ÂØß åÐàÔ ÔØáÚa\" je \"hd\" ãÚÞÛØÚÞ jÕ åÐàÔ ÔØáÚ IDE ãàÕòÐø Ø  \"sd\"\n"
-"ãÚÞÛØÚÞ je SCSI åÐàÔ ÔØáÚ.\n"
-"\n"
-"\n"
-"\"±àÞj åÐàÔ ÔØáÚÐ\" jÕ ãÒÕÚ áÛÞÒÞ ßÞáÛÕ \"hd\" ØÛØ \"sd\". Áa IDE åÐàÔ "
-"ÔØáÚÞÒØÜa:\n"
-"\n"
-"   * \"a\" ×ÝaçØ  \"master åÐàÔ ÔØáÚ ÝÐ ßàØÜÐàÝÞÜ  IDE ÚÞÝâàÞÛÕàã\",\n"
-"\n"
-"   * \"b\" ×ÝaçØ \"slave åÐàÔ ÔØáÚ ÝÐ ßàØÜÐàÝÞÜ IDE ÚÞÝâàÞÛÞÕàã\",\n"
-"\n"
-"   * \"c\" ×ÝaçØ \"master åÐàÔ ÔØáÚ ÝÐ áÕÚãÝÔàÐÝÞÜ IDE ÚÞÝâàÞÛÞÕàã\",\n"
-"\n"
-"   * \"d\" ×ÝaçØ \"slave åÐàÔ ÔØáÚ ÝÐ áÕÚãÝÔÐàÝÞÜ IDE ÚÞÝâàÞÛÕàã\".\n"
-"\n"
-"\n"
-"ÁÐ SCSI åÐàÔ ÔØáÚÞÒØÜa, a \"a\" ×ÝaçØ \"ßàØÜÐàÝØ åÐàÔ ÔØáÚ\", a \"b\" ×ÝaçØ "
-"\"áÕÚãÝÔÐàÝØ åÐàÔ ÔØáÚ \", ØâÔ..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": if the machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to see installed on\n"
-"the machine.\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"ÁÐÔÐ ÜÞÖÕâÕ ÞÔÐÑàÐâØ ÚÞje áÕàÒØáe ÖÕÛØâÕ ÔÐ áÕ áâÐàâÐjã ßàØ ßÞÔØ×aúã "
-"áØáâÕÜa.\n"
-"\n"
-"\n"
-"ºÐÔÐ ÜØèÞÜ ßàeòÕâÕ ßàÕÚÞ Þ×ÝÐÚe áÕàÒØáa, ßÞjÐÒØûÕ áÕ ÜÐÛØ ÑÐÛÞÝ ×Ð ßÞÜÞû "
-"ÚÞjØ \n"
-"ÞßØáãjÕ ãÛÞÓã áÕàÒØáa.\n"
-"\n"
-"\n"
-"±ãÔØâÕ ßÞáÕÑÝÞ ßaÖùØÒØ ã ÞÒÞÜ ÚÞàÐÚã ãÚÞÛØÚÞ ÝÐÜÕàÐÒÐâÕ ÔÐ ÚÞàØáØâe ÜaèØÝã "
-"ÚÐÞ\n"
-"áÕàÒÕà: ÒÕàÞÒÐâÝÞ ûÕ âÕ ÖÕÛÕâØ ÔÐ ÝÕ áâÐàâãjÕâe\n"
-"ÑØÛÞ ÚÞjØ áÕàÒØá ÚÞjØ\n"
-"ÝÕ ÖÕÛØâe."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux àÐÔØ áÐ ã GMT (Greenwich Mean Time) Ø ßàÕÒÞÔØ ã ÛÞÚÐÛÝÞ\n"
-"ã×ÐÒØáÝÞáâØ ÚÞjã áâÕ ÒàÕÜÕÝáÚã ×ÞÝã ÞÔÐÑàÐÛØ."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-#, fuzzy
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"à ÞÒÞÜ âàÕÝãâÚã, ÜÞàÐâÕ ÔÐ Ø×ÐÑÕàÕâÕ ÓÔÕ ûÕâÕ ØÝáâÐÛØàÐâØ\n"
-"Mandrake Linux ÞßÕàÐâØÒÝØ áØáâÕÜ ÝÐ Òaè åÐàÔ ÔØáÚ. ÃÚÞÛØÚÞ jÕ ßàÐ×ÐÝ ØÛØ\n"
-"ßÞáâÞjeûØ ÞßÕàÐâØÒÝØ áØáâÕÜ ÚÞàØáâØ áÐÒ ßÞáâÞjeûØ ßàÞáâÞà ÝÐ ÔØáÚã, âàÕÑÐ Ôa "
-"ÓÐ\n"
-"ßÐàâØæØÞÝØàÐâe. à ÞáÝÞÒØ, ßÐàâØæØÞÝØàaúÕ åÐàÔ ÔØáÚa áÕ áÐáâÞjØ ÛÞÓØçÚÞÓ\n"
-"ÔeùeúÐ ÔÐ ÑØ ÞÑÕ×ÑÕÔØÛØ ßàÞáâÞà ×Ð ØÝáâÐÛÐæØjã Òaè ÝÞÒØ Mandrake Linux "
-"áØáâÕÜ.\n"
-"\n"
-"\n"
-"¿ÞèâÞ áÕ ÕäÕÚâØ ßàÞæÕáÐ ßÐàâØæØÞÝØàaúÐ ÞÑØçÝÞ ÝÕßÞÒàÐâÝØ,\n"
-"ßÐàâØæØÞÝØàúe ÜÞÖÕ ÑØâØ ßàØÛØçÝÞ áâàÕáÐÝ ×Ð ÝÕØáÚãáÝÕ ÚÞàØáÝØÚe.\n"
-"¾ÒÐj çÐàÞÑúÐÚ ßÞjÕÔÝÞáâÐÒùãjÕ ÞÒÐj ßàÞæÕá. ¿àÕ ßÞçÕâÚÐ, ÚÞÝáãÛâãjâÕãßãáâÒÞ\n"
-"Ø ÝÕ ÖãàØâe.\n"
-"\n"
-"\n"
-"¼ÞàÐâÕ ÔÐ ØÜÐâÕ ØÛØ ÔÐ ÚàÕØàÐâÕ ÝÐjÜaúÕ ÔÒÕ ßÐàâØæØje. JÕÔÝa jÕ ×Ð áÐÜ "
-"ÞßÕàÐâØÒÝØ áØáâÕÜ aÔàãÓa\n"
-"jÕ ×Ð ÒØàâãÕÛÝã ÜÕÜÞàØjã (çÕáâÞ áÕ ÝÐ×ØÒÐ Ø Swap).\n"
-"\n"
-"\n"
-"ÃÚÞÛØÚÞ áã ßÐàâØæØjÕ Òeû ÚàÕØàÐÝÕ (ÞÔ ßàÕÔåÞÔÝÕ ØÝáâÐÛÐæØjÕ ØÛØÚàÕØàÐÝe\n"
-"ÔàãÓØÜ aÛÐâÞÜ ×Ð ßÐàâØæØÞÝØàaúe), ÜÞàÐâÕ Ø×ÐÑàÐâØ ÝÐ ÚÞjÕ ÞÔ úØå "
-"ûÕâeØÝáâÐÛØàÐâØ \n"
-"Linux áØáâÕÜ.\n"
-"\n"
-"\n"
-"ÃÚÞÛØÚÞ ßÐàâØæØjÕ ÝØáã ÔÕäØÝØáÐÝe, ÜÐàÐâÕ ÔÐ Øå ÚàÕØàÐâe. \n"
-"´Ð ÑØ âÞ ãàÐÔØÛØ, ÜÞÖÕâÕ ÔÐ ÚÞàØáâØâÕ ÓÞàÕ ßÞáâÐÒùÕÝØ çÐàÞÑúÐÚ. à ×ÐÒØáÝÞáâØ "
-"ØÔ ÚÞÝäØÓãàÐæØje\n"
-"åÐàÔ ÔØáÚa, ßÞáâÞjØ ÝÕÚÞÛØÚÞ ÜÞÓãûÝÞáâØ:\n"
-"\n"
-"* ºÞàØáâØâÕ ßÞáâÞjeûÕ ßÐàâØæØje: çÐàÞÑúÐÚ jÕ ÔÕâÕÚâÞÒÐÞ jÕÔÝã ØÛØ ÒØèÕ "
-"ßÞáâÞjeûØåLinux ßÐàâØæØjÐ ÝÐ ÒaèÕÜ åÐàÔ ÔØáÚã. ÃÚÞÛØÚÞ\n"
-"  ÖÕÛØâÕ ÔÐ Øå ×ÐÔàÖØâÕ, Ø×ÐÑÕàØâÕ ÞÒã ÞßæØjã.\n"
-"\n"
-"\n"
-"* ±àØáaúÕ æÕÛÞÓ ÔØáÚa: ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ Ø×ÑàØèÕâÕ áÒÕ ßÞÔÐâÚÕ Ø áÒÕ "
-"ßÐàâØæØje ÚÞjØ ßÞáâÞjÕ ÝÐ ÒaèÕÜ åÐàÔ ÔØáÚã Ø ×ÐÜÕÝØâÕ Øå ÒaèØÜ\n"
-"  ÝÞÒØÜ Mandrake Linux áØáâÕÜÞÜ, ÜÞÖÕâÕ ÔÐ Ø×ÐÑÕàÕâÕ ÞÒã ÞæØjã. ±ãÔØâÕ "
-"ßaÖùØÒØáÐ ÞÒÞÜ ÞßæØjÞÜ, jÕà ÝeûÕâÕ ÑØâØ ã ÜÞÓãûÝÞáâØ\n"
-"  ÔÐ ßÞÒàÐâØâÕ áâÐàÞ áâaúe ÝÐÚÞÝ ßÞâÒàÔe.\n"
-"\n"
-"\n"
-"* ºÞàØáâØâe áÛÞÑÞÔÐÝ ßàÞáâÞà ÝÐ Windows ßÐàâØæØjØ: ãÚÞÛØÚÞ je Microsoft "
-"WindowsØÝáâÐÛØàÐÝ ÝÐ åÐàÔ ÔØáÚã Ø ×Ðã×ØÜÐ\n"
-"  áÐÒ ßàÞáâÞà, ÜÞàÐâÕ ÔÐ ÚàÕØàÐâÕ áÛÞÑÞÔÐÝ ßàÞáâÞà ×Ð Linux. ´Ð ÑØ âÞ "
-"ãàÐÔØÛØ ÜÞàÐâÕ Ø×ÑàØáÐâØ\n"
-"  Microsoft Windows ßÐàâØæØjã Ø ßÞÔÐâÚe (ßÞÓÛÕÔÐj \"±àØáaúÕ æÕÛÞÓ ÔØáÚa\" "
-"ØÛØ \"EÚáßÕàâÝØ ÜÞÔ\" àeèeúa) ØÛØ ÔÐ ßàÞÜÕÝØâÕ ÒeÛØçØÝã\n"
-"  Microsoft Windows ßÐàâØæØje. ÂÐj ßÞáâãßÐÚ áÕ ÜÞÖe Ø×ÒÕáâØ ÑÕ× "
-"ÓãÑùeúÐßÞÔÐâÐÚa. ¾ÒÞ àeèeúÕ áÕ ßàÕßÞàãçãje\n"
-"  ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ Mandrake Linux Ø Microsoft Windows ÝaØáâÞÜ "
-"ÚÞÜßjãâÕàã.\n"
-"\n"
-"\n"
-"  ¿àÕ ÝÕÓÞ Ø×ÐÑÕàÕâÕ ÞÒã ÞßæØjã, ÜÞàÐâÕ ×ÝÐâØ ÔÐ ûÕ ÒÕÛØçØÝÐMicrosoft\n"
-"  Windows ßÐàâØæØjÕ ÑØâØ ÜaúÐ ÝÕÓÞ èâÞ jÕ áÐÔa. ÂÞ ×ÝaçØ ÔÐûÕâÕ ØÜaâØ ÜaúÕ "
-"ßàÞáâÞàÐ ßÞÔ\n"
-"  Microsoft Windows-ÞÜ ×Ð ßÞÔÐâÚÕ ØÛØ ØÝáâÐÛÐæØjã ÝÞÒÞÓ áÞäâÒÕàa.\n"
-"\n"
-"\n"
-"* EÚáßÕàâÝØ ÜÞÔ: ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ àãçÝÞ ßÐàâØæØÞÝØàÐâÕ åÐàÔ ÔØáÚ, ÜÞÖÕâeÔÐ "
-"Ø×ÐÑÕàÕâÕ ÞÒã ÞßæØjã. ±ãÔØâÕ ßaÖùØÒØ ßàÕ ÝÕÓÞ\n"
-"  Ø×ÐÑÕàÕâÕ ÞÒã ßÞæØjã. ¹Õà jÕ ÞÒÞ ÔÞÑàÐ ÐÛØ Ø ÞßÐáÝÐ áâÒÐà. ¼ÞÖÕâeÛÐÚÞ "
-"Ø×ÓãÑØâØ áÒÕ ßÞÔÐâÚe. ´ÐÚÛe,\n"
-"  ÝÕÜÞjâÕ ÑØàÐâØ ÞÒã ÞßæØjã ãÚÞÛØÚÞ ÝÕ ×ÝÐâÕ èâÐ àÐÔØâÕ."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*) : saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"ÁÒÐÚÐ ßÐàâØæØjÐ ÚÞjÐ jÕ ÝÞÒÞÔÕäØÝØáÐÝÐ ÜÞàa ÑØâØ\n"
-"äÞàÜÐâØàÐÝÐ ×Ð ãßâàÕÑã (äÞàÜÐâØàaúÕ ×ÝÐçØ ÚàÕØàaúÕ ÔÐâÞâeçÝÞÓ(äÐjÛ) "
-"áØáâÕÜa).\n"
-"\n"
-"\n"
-"ÁaÔÐ ÜÞÖÔÐ ÖÕÛØâÕ ÔÐ àÕäÞàÜÐâØàÐâÕ ßÞáâÞjeûÕ ßÐàâØæØje ÔÐ ÑØ Ø×ÑàØáÐÛØ\n"
-"ßÞÔÐâÚÕ ÚÞjÕ áÐÔàÖÕ. ÃÚÞÛØÚÞ ÖÕÛØâÕ âÞ, Ø×ÐÑÕàØâÕ ßÐàâØæØjÕ \n"
-"ÚÞjÕ ÖÕÛØâÕ ÔÐ äÞàÜÐâØ×ãjÕâe.\n"
-"\n"
-"\n"
-"·ÐßÐÜâØâÕ ÔÐ ÝØjÕ ßÞâàÕÑÝÞ ÔÐ àÕäÞàÜÐâØàÐâÕ áÒÕ ßÞáâÞjeûÕ ßÐàâØæØje.\n"
-"¼ÞàÐâÕ ÔÐ àÕäÞàÜÐâØàÐâÕ ßÐàâØæØjÕ ÚÞjÕ áÐÔàÖÕ ÞßÕàÐâØÒÝØ áØáâÕÜ (ÚÐÞ èâÞ áã "
-"\"/\",\n"
-"\"/usr\" ØÛØ  \"/var\") ÐÛØ ÝÕ ÜÞàÐâÕ ÔÐ àÕäÞàÜÐâØàÐâÕ ßÐàâØæØjÕ ÚÞjÕ áÐÔàÖÕ "
-"ßÞÔÐâÚe\n"
-"ÚÞjÕ ÖÕÛØâÕ ÔÐ ×ÐÔàÖØâe (ÞÑØçÝÞ /home).\n"
-"\n"
-"\n"
-"¿Ð×ØâÕ ßàØ ÑØàaúã ßÐàâØæØja, ßÞáÛÕ äÞàÜÐâØàaúa, áÒ ßÞÔÐæØ ûÕ \n"
-"ÑØâØ Ø×ÑàØáÐÝØ Ø ÝeûÕâÕ Øå ÜÞûØ ßÞÒàÐâØâØ.\n"
-"\n"
-"\n"
-"ºÛØÚÝØâÕ ÝÐ \"à àÕÔã\" ÚÐÔÐ ÑãÔÕâÕ áßàÕÝØ ×Ð äÞàÜÐâØàaúÕ ßÐàâØæØja.\n"
-"\n"
-"\n"
-"ºÛØÚÝØâÕ ÝÐ  \"¿ÞÝØèâØ\" ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ Ø×ÐÑÕàÕÕâÕ ÔàãÓÕ ßÐàâØæØjÕ ×Ð "
-"ØÝáâÐÛÐæØjã ÝÞÒÞÓ\n"
-"Mandrake Linux ÞßÕàÐâØÒÝÞÓ áØáâÕÜa."
-
-#: ../../help.pm_.c:376
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"²aè ÝÞÒØ Mandrake Linux ÞßÕàÐâØÒÝØ áØáâÕÜ áÕ âàÕÝãâÝÞ\n"
-"ØÝáâÐÛØàa. ¾ÒÐ ÞßÕàÐæØjÐ ÑØ âàÕÑÐÛÐ ÔÐ ßÞâàÐjÕ ÝÕÚÞÛØÚÞ ÜØÝãâa (ã ×ÐÒØáÝÞáâØ "
-"ÞÔ ÒÕÛØçØÝe\n"
-"ßÐÚÕâÐ ÚÞjØ áÕ ØÝáâÐÛØàÐjã Ø Ñà×ØÝÕ ÒaèÕÓ ÚÞÜßjãâÕàa).\n"
-"\n"
-"\n"
-"¼ÞÛØÜ ²Ðá ×Ð áâàßùeúe.ÅÒÐÛa."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-#, fuzzy
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"½Ð ÞÒÞj âaçÚØ, ÜÞàÐâÕ Ø×ÑàÐâØ ÚÞjã\n"
-"ßÐàâØæØjã(e) ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ ×Ð ØÝáâÐÛÐæØjã ÝÞÒÞÓ Mandrake Linux "
-"áØáâÕÜa. ÃÚÞÛØÚÞ áã ßÐàâØæØje\n"
-"Òeû ÔÕäØÝØáÐÝÕ (ÞÔ ßàÕÔåÞÔÝÕ ØÝáâÐÛÐæØjÕ ØÛØ ÞÔ áâàÐÝe\n"
-"ÔàãÓÞÓ ÐÛÐâÐ ×Ð ßÐàâØæØje), ÜÞÖÕâÕ ÔÐ ÚÞàØáâØâÕ ßÞáâÞjeûÕ ßÐàâØæØje. à "
-"ÔàãÓØÜ áÛãçÐjÕÒØÜa,\n"
-"åÐàÔ ÔØáÚ ßÐàâØæØjÕ ÜÞàÐjã ÑØâØ ÔÕäØÝØáÐÝe.\n"
-"\n"
-"\n"
-"´Ð ÑØ ÚàÕØàÐÛØ ßÐàâØæØjÕ, ÜÞàÐâÕ ßàÒÞ Ø×ÐÑàÐâØ åÐàÔ ÔØáÚ. ¼ÞÖÕâÕ Ø×ÐÑàÐâØ "
-"ßàÐÒØ\n"
-"ÔØáÚ ×Ð ßÐàâØæØÞÝØàaúÕ ÚÛØÚÞÜ ÝÐ \"hda\" ×Ð ßàÒØ IDE ÔØáÚ, \"hdb\" ØÛØ \n"
-"×Ð ÔàãÓØ ØÛØ \"sda\" ×Ð ßàÒØ SCSI ÔØáÚ ØâÔ.\n"
-"\n"
-"\n"
-"·Ð ßÐàâØæØÞÝØàaúÕ áÕÛÕÚâÞÒÐÝÞÓ åÐàÔ ÔØáÚÐ, ÜÞÖÕâÕ ÚÞàØáâØâØ áÛÕÔeûÕ ÞßæØje:\n"
-"\n"
-"   * ¾çØáâØ áÒe: ÞÒÐ ÞßæØjÐ ÑàØèÕ áÒÕ ßÐàâØæØjÕ ÝÐ Ø×ÐÑàÐÝÞÜ åÐàÔ ÔØáÚã.\n"
-"\n"
-"\n"
-"   * Auto ÐÛÞæØàaúe:: ÞÒÐ ÞßæØjÐ ÔÞ×ÒÞùÐÒÐ ÔÐ ÐãâÞÜÐâáÚØ ÚàÕØàÐâÕ  Ext2 Ø "
-"swap ßÐàâØæØjÕ ÝÐ áÛÞÑÞÔÝÞÜ ßàÞáâÞàã \n"
-"     åÐàÔ ÔØáÚa.\n"
-"\n"
-"\n"
-"   * ÁßÐáØ âÐÑÕÛã ßÐàâØæØja: ãÚÞÛØÚÞ je ÒaèÐ âÐÑÕÛÐ ßÐàâØæØjÐ ÞèâeûÕÝÐ, "
-"ÜÞÖÕâÕ ÔÐ ßàÞÑÐâe ÔÐ jÕ ÞßÞàÐÒØâÕ ÚÞàØáâeûØ ÞÒã ÞßæØjã. ±ãÔØâÕ\n"
-"     ßaÖùØÒØ Ø ×ÝÐjâÕ ÔÐ ÜÞÖÕ ÔÐ Ø ÝÕ ãáße.\n"
-"\n"
-"\n"
-"   * ²àÐâØ ÝÐ áâÐàÞ: ÞÒÐ ÞßæØjÐ ûÕ ßÞÝØèâØâØ Ø×ÜÕÝã.\n"
-"\n"
-"\n"
-"   * ¿ÞÝÞÒÝÞ ãçØâÐÒaúe: ÞÒã ÞßæØjã ÜÞÖÕâÕ ÚÞàØáâØâØ ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ "
-"ßÞÝØèâØâØáÒÕ ßàÞÜÕÝe Ø ãçØâÐâÕ ØÝØæØjÐÛÝã âÐÑÕÛã ßÐàâØæØja\n"
-"\n"
-"\n"
-"   * çÐàÞÑúÐÚ: ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ çÐàÞÑúÐÚa ×Ð ßÐàâØæØÞÝØàaúe åÐàÔ "
-"ÔØáÚa, Ø×ÐÑÕàØâe ÞÒã ÞßæØjã. ¿àÕßÞàãçÕÝa jÕ ãÚÞØÚÞ\n"
-"     ÝÕÜÐâÕ ÜÝÞÓÞ ×ÝaúÐ Þ ßÐàâæØjÐÜa.\n"
-"\n"
-"\n"
-"   * ¿ÞÒàÐâØ áÐ ÔØáÚÕâe: ãÚÞÛØÚÞ áâÕ áÝØÜØÛØ âÐÑÕÛã ßÐàâØæØjÐ ÝÐ ÔØáÚÕâã  "
-"âÞÚÞÜ ßàÕâåÞÔÝÕ ØÝáâÐÛÐæØje, ÜÞÖÕâÕ je\n"
-"     ÒàÐâØâØ áÐ ÞÒÞÜ ÞßæØjÞÜ.\n"
-"\n"
-"\n"
-"   * ÁÝØÜØ ÝÐ ÔØáÚÕâã: ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ÔÐ áÝØÜØâÕ âÐÑÕÛã ßÐàâØæØja ÝÐ "
-"ÔØáÚÕâã Ôa ÑØ ÜÞÓÛØ ÚÐáÝØjÕ ÔÐ jÕ ßÞÒàÐâØâe, ÜÞÖÕâÕ ÔÐ ØáÚÞàØáâØâe\n"
-"     ÞÒã ÞßæØjã. ½ÐàÞçØâÞ ßàÕßÞàãçãjÕÜÞ ÞÒã ÞßæØjã\n"
-"\n"
-"\n"
-"   * ÃàaòÕÝÞ: ÚÐÔÐ ×ÐÒàèØâÕ áÐ ßÐàâØæØÞÝØàaúÕÜ åÐàÔ ÔØáÚÐ, ØáÚÞàØáâØâÕ ÞÒã "
-"ÞßæØjã ÔÐ ÑØ áÝØÜØÛØ ßàÞÜÕÝe.\n"
-"\n"
-"\n"
-"·Ð ÒØèÕ ØÝäÞàÜÐæØja, ÜÞÖÕâÕ ×Ð áÒÐÚã ÞæßØjã  ÔÞÑØâØ ÚàÕâaúÕÜ ßÞÜÞûã "
-"âÐáâÐâãàe: ÝÐÒØÓÐæØjÞÜ ÚàÞ× ßÐàâØæØjÕ ßÞÜÞûã Tab âÐáâÕàa Ø Up/Down "
-"áâàÕÛØæa.\n"
-"\n"
-"\n"
-"ºÐÔÐ jÕ ßÐàâØæØjÐ Ø×ÐÑàÐÝa, ÜÞÖÕâÕ ÚÞàØáâØâØ:\n"
-"\n"
-"           * Ctrl-c ×Ð ÚàÕØàaúÕ ÝÞÒÕ ßÐàâØæØje (ÚÐÔÐ jÕ Ø×ÐÑàÐÝÐ ßàÐ×ÝÐ "
-"ßÐàâØæØja)\n"
-"\n"
-"           * Ctrl-d ×Ð ÑàØáaúÕ ßÐàâØæØje\n"
-"\n"
-"           * Ctrl-m ×Ð ßÞáâÐÒùaúÕ âaçÚÕ ÜÞÝâØàaúa           \n"
-"\n"
-"           \n"
-"ÃÚÞÛØÚÞ àÐÔØâÕ ØÝáâÐÛÐæØjã Ýa PPC ¼aèØÝã, ÜÞÖÔÐ ûÕâÕ ÖÕÛÕâØ ÔÐ ÚàÕØàÐâe ÜÐÛã "
-"HFS 'bootstrap' ßÐàâØæØjã ÞÔ ÝÐjÜaúÕ 1MB ×Ð ãßÞâàÕÑã\n"
-"yaboot áâÐàâÕàa. ÃÚÞÛØÚÞ áÕ ÔÒÞãÜØâÕ ÔÐ ÞÒã ßÐàâØæØjã ÝÐßàÐÒØâÕ ÜÐÛÞ ÒeûÞÜ, "
-"ÝÐ ßàØÜÕà50MB, ÜÞÖÕâÕ ØáÚÞàØáâØâØ âÐj ßàÞáâÞà ×Ð áÜeèâaúÕ \n"
-"àÕ×ÕàÒÝÞÓ ÚÕàÝÕÛÐ Ø ramdisk image ×Ð áâÐàâaúÕ ã åØâÝØÜ áØâãÐæØjÐÜa."
-
-#: ../../help.pm_.c:460
-#, fuzzy
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want to resize in order to install your\n"
-"new Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"JÕÔÝÐ ØÛØ ÒØèÕ ¼icrosoft Windows ßÐàâØæØjÐ jÕ ÔÕâÕÚâÞÒÐÝÞ \n"
-"ÝÐ åÐàÔ ÔØáÚã. ¸×ÐÑÕàØâÕ ÚÞjã ÞÔ úØå ÖÕÛØâÕ ÔÐ áÜaúØâÕ ÔÐ ÑØ ØÝáâÐÛØàÐÛØ\n"
-"ÝÞÒØ Mandrake Linux ÞßÕàÐâØÒÝØ áØáâÕÜ.\n"
-"\n"
-"\n"
-"¸ÝäÞàÜÐæØja: áÒÐÚÐ ßÐàâØæØjÐ jÕ ØáßØáÐÝÐ ÝÐ áÛÕÔeûØ ÝaçØÝ: \"¸ÜÕ Linux-a\", "
-"\"¸Üe\n"
-"Windows-a\" \"ºÐßÐæØâÕâ\".\n"
-"\n"
-"\"¸ÜÕ Linux-a\" je ÚÞÔØàÐÝÞ ÝÐ áÛÕÔeûØ ÝaçØÝ: \"âØß åÐàÔ ÔØáÚa\", \"ÑàÞj "
-"åÐàÔ ÔØáÚa\",\n"
-"\"ÑàÞj ßÐàâØæØje\" (ÝÐ ßàØÜÕà, \"hda1\").\n"
-"\n"
-"\n"
-"\"ÂØß åÐàÔ ÔØáÚa\" je \"hd\" ãÚÞÛØÚÞ je åÐàÔ ÔØáÚ ID ãàÕòÐø Ø \"sd\"\n"
-"ãÚÞÛØÚÞ jÕ SCSI åÐàÔ ÔØáÚ.\n"
-"\n"
-"\n"
-"\"±àÞj åÐàÔ ÔØáÚa\" je ãÒÕÚ áÛÞÒÞ ßÞáÛÕ \"hd\" ØÛØ \"sd\". Áa IDE åÐàÔ "
-"ÔØáÚÞÒØÜa:\n"
-"\n"
-"   * \"a\" ×ÝaçØ  \"master åÐàÔ ÔØáÚ ÝÐ ßàØÜÐàÝÞÜ  IDE ÚÞÝâàÞÛÕàã\",\n"
-"\n"
-"   * \"b\" ×ÝaçØ \"slave åÐàÔ ÔØáÚ ÝÐ ßàØÜÐàÝÞÜ IDE ÚÞÝâàÞÛÞÕàã\",\n"
-"\n"
-"   * \"c\" ×ÝaçØ \"master åÐàÔ ÔØáÚ ÝÐ áÕÚãÝÔàÐÝÞÜ IDE ÚÞÝâàÞÛÞÕàã\",\n"
-"\n"
-"   * \"d\" ×ÝaçØ \"slave åÐàÔ ÔØáÚ ÝÐ áÕÚãÝÔÐàÝÞÜ IDE ÚÞÝâàÞÛÕàã\".\n"
-"\n"
-"\n"
-"ÁÐ SCSI åÐàÔ ÔØáÚÞÒØÜa, a \"a\" ×ÝaçØ \"ßàØÜÐàÝØ åÐàÔ ÔØáÚ\", a \"b\" ×ÝaçØ "
-"\"áÕÚãÝÔÐàÝØ åÐàÔ ÔØáÚ \", ØâÔ.\n"
-"\n"
-"\n"
-"\"¸ÜÕ Windows-a\" jÕ áÛÞÒÞ åÐàÔ ÔØáÚÐ ßÞÔ Windows-ÞÜ (ßàÒØ ÔØáÚÔØáÚ\n"
-"ØÛØ ßÐàâØæØja áÕ ×ÞÒÕ \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "±ãÔØâÕ áâàßùØÒØ.ÂàÐjaúÕ ÞÒØå ÞÕàÐæØjÐ ÜÞÖÕ ÑØâØ ÝÕÚÞÛØÚÞ ÜØÝãâa"
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"¸×ÐÑÕàØâÕ  \"¸ÝáâÐÛÐæØja\" ãÚÞÛØÚÞ ÝÕÜÐ ßàÕâåÞÔÝÕ ÒÕà×ØjÕMandrake Linux\n"
-"ÚÞjÐ jÕ ØÝáâÐÛØàÐÝÐ ØÛØ åÞûÕâÕ ÔÐ ÚÞàØáâØâÕ ÒØèÕ ÞßÕàÐâØÒÝØå áØáâÕÜa.\n"
-"\n"
-"\n"
-"¸×ÐÑÕàØâe \"AÖãàØàaúe\" ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ aÖãàØàaâÕ ßÞáâÞjeûã ÒÕà×Øjã "
-"Mandrake Linux-a.\n"
-"\n"
-"\n"
-"à ×ÐÒØáÝÞáâØ ÞÔ ÒaèÕÓ ßÞ×ÝÐÒaúÐ GNU/Linux-a, ÜÞÖÕâÕ Ø×ÐÑàÐâØ jÕÔÝã ÞÔ "
-"áÛÕÔeûØå ÝØÒÞÐ ×Ð ØÝáâÐÛÐæØjã ØÛØ aÖãàØàaúÕ\n"
-"Mandrake Linux ÞßÕàÐâØÒÝÞÓ áØáâÕÜa:\n"
-"\n"
-"* ¿àÕßÞàãçÕÝÞ: ãÚÞÛØÚÞ ÝØÐÚÐÔÐ ÝØáâÕ ØÝáâÐÛØàÐÛØ  GNU/Linux ÞßÕàÐâØÒÝØ "
-"áØáâÕÜ Ø×ÐÑÕàØâÕ ÞÒÞ. ¸ÝáâÐÛÐæØjÐ ûÕ ÑØâØ\n"
-"  ÒÕÞÜÐ ÛÐÚÐ Ø ØÜaûÕâÕ ÔÐ ÞÔÓÞÒÞàØâÕ ÝÐ áÒÕÓÐ ÝÕÚÞÛØÚÞ ßØâaúa.\n"
-"\n"
-"\n"
-"* ÁÐ ßÞÔeèÐÒaúÕÜ(Customized): ãÚÞØÚÞ ÒÐÜ jÕ ßÞ×ÝÐâ GNU/Linux, ÜÞÖÕâe "
-"Ø×ÐÑàÐâØ ßàØÜÐàÝã ÝÐÜÕÝã ×Ð ÚÞjã ÚÞØáâØâÕ ÞßÕàÐâØÒÝØ áØáâÕÜ (àÐÔÝÐ áâÐÝØæÐ, "
-"áÕàÒÕà,\n"
-"  àÐ×ÒÞjÝÐ áâÐÝØæa). ¼ÞàaûÕâÕ ÔÐ ÞÔÓÞÒÞàØâÕ ÝÐ ÒØèÕ ßØâaúÐ ÝÕÓÞ ãthan in "
-"\"¿àÕßÞàãçÕÝÞ\" ØÝáâÐÛÐæØÞÝÞj\n"
-"  ÚÛÐáØ, âÐÚÞ ÔÐ ÜÞàÐâÕ ÔÐ ÑÞùÕ ßÞ×ÝÐjÕâÕ ÚÐÚÞ àÐÔØ GNU/Linux ÔÐ ÑØ Ø×ÐÑàÐÛØ "
-"ÞÒãØÝáâÐÛÐæØÞÝã ÚÛÐáã.\n"
-"\n"
-"\n"
-"* µÚáßÕàâ: ãÚÞÛØÚÞ ØÐÜâÕ ÔÞÑàÞ ×ÝaúÕ Þ GNU/Linux-ã, ÜÞÖÕâÕ Ø×ÐÑàÐâØ ÞÒã "
-"ØÝáâÐÛÐæØÞÝã ÚÛÐáã. ºÐÞ Ø \"ÁÐ ßÞÔeèÐÒaúÕÜ\"\n"
-"  ØÝáâÐÛÐæØÞÝÞj ÚÛÐáØ, ÜÞûØ ûÕâÕ ÔÐ ÑØàÐâÕ ßàØÜÐàÝã ÝÐÜÕÝã (àÐÔÝÐ áâÐÝØæÐ, "
-"áÕàÒÕà, àÐ×ÒÞjÝÐ áâÐÝØæa). ±ãÔØâÕ ÒÕÞÜa\n"
-"  ßaÖùØÒØ ßàÕ Ø×ÑÞàÐ ÞÒÕ ØÝáâÐÛÐæØÞÝÕ ÚÛÐáÕ. ¼ÞûØ ûÕâÕ ÔÐ Ø×ÒÞÔØâÕ ÒÕÞÜÐ "
-"ßÞÔÕáØÒã ØÝáâÐÛÐæØjã.\n"
-"  ¾ÔÓÞÒÞàØ ÝÐ ÝÕÚÐ ßØâaúÐ ÜÞÓã ÑØâØ ÒÕÞÜÐ âeèÚØ ãÚÞÛØÚÞ ÝÕÜÐâÕ ÔÞÑàÞ ×ÝaúÕ Þ "
-"GNU/Linux-ã. ´ÐÚÛe, ÝÕÜÞjâÕ ÑØàÐâØ \n"
-"  ÞÒã ØÝáâÐÛÐæØÞÝã ÚÐáã ãÚÞÛØÚÞ ÝÕ ×ÝÐâÕ èâÐ àÐÔØâe."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"¼ÞÛØÜ, Ø×ÐÑÕàØâÕ ÞÔÓÞÒÐàÐøãûØ ßÞàâ. ½Ð ßàØÜÕà, COM1 ßÞàâ\n"
-"ßÞÔ  MS Windows-ÞÜ ã Linux-ã ØÜÐ Þ×ÝÐÚã ttyS0."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) Ø  Grub áã áâÐàâÕàØ: ÞÝØ ÞÜÞÓãûÐÒÐjã ÔÐ áâÐàâÐâÕ \n"
-"ØÛØ  Linux ØÛØ ÑØÛÞ ÚÞjØ  ÔàãÓØ  ÞßÕàÐâØÒÝØ áØáâÕÜ ßàØáãâÐÝ ÝÐ ÒaèÕÜ "
-"ÚÞÜßjãâÕàã.\n"
-"½ÐàÐÒÝÞ, ÞÒØ ÔàãÓØ ÞßÕàÐâØÒÝØ áØáâÕÜØ áã ØáßàÐÒÝÞ ÔÕâÕÚâÞÒÐÝØ Ø "
-"ØÝáâÐÛØàÐÝØ. \n"
-"ÃÚÞÛØÚÞ âÞ ÝØjÕ âÐÚÞ,ÜÞÖÕâÕ âÞ áÐÜØ ãàÕÔØâØ ÞÒÔe.¿Ð×ØâÕ ÚÐÔÐ ãÝÞáØâÕ\n"
-"ßÐàÐÜeâàe\n"
-"\n"
-"\n"
-"ÂÐÚÞòe,ÜÞÖeâe ÖÕÛÕâØ ÔÐ ÞáâÐÛØÜ ÞßÕàÐâ.áØáâÕÜØÜÐ ÞÝeÜÞÓãûØâe ÔÐ ßàØáâãßÕ "
-"ÔàãÓØ \n"
-"à âÞÜ áÛãçÐjã, âàÕÑÐ ÔÐ Ø×ÑàØèÕâÕ ÞÔÓÞÒÐàÐjãûe ÛØÝØje ×Ð âÕ áØáâÕÜe. °ÛØ\n"
-"ÞÝÔa ÜÞàÐâÕ ØÜÐâØ boot ÔØáÚÕâÕ ÔÐ ÑØ Øå áâÐàâÐÛØ !"
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"¼ÞàÐâÕ Þ×ÝÐçØâØ ÓÔÕ ÖÕÛØâÕ ÔÐ ßÞáâÐÒØâÕ\n"
-"ßÞÔÐâÚÕ ßÞâàÕÑÝÕ ×Ð ßÞÔØ×ÐúÕ »ØÝãÚáÐ.\n"
-"\n"
-"\n"
-"ÃÚÞÛØÚÞ ÝÕ×ÝÐâÕ âÐçÝÞ èâÐ àÐÔØâÕ,Ø×ÐÑÕàØâÕ \"¿àÒØ áÕÚâÞà\n"
-"ÔØáÚÐ (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting Information on Your\n"
-"Hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX ûÕ ßÞâàaÖØâØ  PCI SCSI ÐÔÐßâÕà(e).\n"
-"ÃÚÞÛØÚÞ DrakX ßàÞÝaòÕ SCSI ÐÔÐßâÕà(Õ) Ø ÑãÔÕ ×ÝÐÞ ÚÞjØ ãßàÐÒùaçÚØ ßàÞÓàÐÜ "
-"(ÔàÐjÒÕà) ÚÞàØáâØÞÝ ûÕ ÓÐ(Øå) ÐãâÞÜÐâáÚØ ØÝáâÐÛØàÐâØ.\n"
-"\n"
-"\n"
-"ÃÚÞÛØÚÞ ÝÕÜÐâÕ SCSI ÐÔÐßâÕà, ØÛØ ØÜÐâÕ ISA SCSI ÐÔÐßâÕà, ØÛØ  a\n"
-"PCI SCSI ÐÔÐßâÕà ÚÞjØ DrakX ÝÕ ÜÞÖÕ ÔÐ ßàÕßÞ×Ýa ÞÝ ûÕ ÒÐá ßØâÐâØ\n"
-"ÔÐ ÛØ ØÜÐâÕ SCSI ÐÔÐßâÕà ã  ÜaèØÝØ. ÃÚÞÛØÚÞ ÝÕÜÐâÕ ÐÔÐßâÕà\n"
-"áÐÜÞ ÚÛØÚÝØâÕ ÝÐ  '½e'. ÃÚÞÛØÚÞ ÚÛØÚÝÕâÕ ÝÐ  '´a' ßÞjaÒØûÕ áÕ ÛØáâÐ "
-"ÔàÐjÒÕàa\n"
-"Ø× ÚÞjÕ ÜÞÖÕâÕ ÞÔÐÑàÐâØ ÞÔÓÞÒÐàÐjãûØ ×Ð Òaè ÐÔÐßâÕà.\n"
-"\n"
-"\n"
-"ÃÚÞÛØÚÞ ÜÞàÐâÕ àãçÝÞ ÔÐ áßÕæØäØæØàÐâÕ Òaè ÐÔÐßâÕà, DrakX ûe\n"
-"ÒÐá ãßØâÐâØ ÔÐ ÞÔàÕÔØâÕ ÞßæØjÕ ×Ð úÕÓa.ÂàÕÑÐ ÛØ ÑØ ÔÐ ÔÞ×ÒÞÛØâe DrakX-ã Ôa\n"
-"ØáßØâÐ ÐÔÐßâÕà àÐÔØ âØå ÞßæØja. ¾ÒÞ ÞÑØçÝÞ Ø ãáße.\n"
-"\n"
-"\n"
-"ÃÚÞÛØÚÞ ÝÕ, ÜÞàaûÕâÕ ÔÐ áÐÜØ ÞÔàÕÔØâe ÞßæØjÕ ×Ð ÔàÐjÒÕà.\n"
-"¿ÞÓÛÕÔÐjâÕ Ø ¸ÝáâÐÛÐæØÞÝØ ÒÞÔØç ×Ð ÔÞÔÐâÝÐ ÞÑjaèúeúa ØÛØ\n"
-"ØáÚÞàØáØâØâÕ áÒÞjã Windows ØÝáâÐÛÐæØjã (ãÚÞÛØÚÞ jÕ ØÜÐâÕ ÝÐ áØáâÕÜã),\n"
-"ÔÞÚãÜÕÝÐâæØjã Þ åÐàÔÒÕàã, ØÛØ áÐ ßàÞØ×ÒÞòaçÕÒÞÓ \n"
-"ÒÕÑ áÐjâa (ãÚÞÛØÚÞ ØÜÐâÕ ßàØáâãß ØÝâÕàÝÕâã)."
-
-#: ../../help.pm_.c:720
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"¼ÞÖÕâÕ ÔÞÔÐâØ Ø ÔÞÔÐâÝe ãÝÞáÕ ×Ð yabbot, ØÛØ ×Ð ÔàãÓÕ ÞßÕàÐâØÒÝÕ sáØáâÕÜe,\n"
-"ÐÛâÕàÝÐâØÒÝÕ ÚÕàÝÕÛe, ØÛØ ×Ð emergency boot image.\n"
-"\n"
-"\n"
-"·Ð ÔàãÓe OS-ÞÒe - ãÝÞá áÐÔàÖØ áÐÜÞ Þ×ÝÐÚã Ø  root ßÐàâØæØjã.\n"
-"\n"
-"\n"
-"·Ð Linux, ßÞáâÞjØ ÝÕÚÞÛØÚÞ ÜÞÓãûÝÞáâØ: \n"
-"\n"
-"\n"
-"  - ¾×ÝÐÚa: ¾ÒÞ jÕ jÕÔÝÞáâÐÒÝÞ ØÜÕ ÚÞjÕ ûeâe ãÚãæÐâØ ßàØ yaboot ßàÞÜßâã ÔÐ "
-"ÑØ Ø×aÑàÐÛØ ÞÒã \n"
-"áâÐàâÝã ÞßæØjã.\n"
-"\n"
-"\n"
-"  - Image: ¾ÒÞ jÕ ØÜÕ ÚÕàÝÕÛÐ ÚÞjØ áÕ áâÐàâãje.  ¾ÑØçÝÞ vmlinux ØÛØ \n"
-"ÒÐàØjÐæØjÐ vmlinux áÐ ÕÚáâÕÝ×ØjÞÜ.\n"
-"\n"
-"\n"
-"  - Root: root ãàÕòÐø ØÛØ '/' ×Ð Òaèã Linux ØÝáâÐÛÐæØjã.\n"
-"\n"
-"\n"
-"  \n"
-"  - ´ÞÔÐâÐÚ: ½Ð Apple åÐàÔÒÕàã, ÚÕàÝÕÛÞÒÐ ÞßæØja áÕ ÚÞàØáâØ ×a ßàØÛØçÝÞ "
-"çÕáâÞ Ôa\n"
-"ÐáØáâØàÐ ØÝØæØjÐÛØ×ÐæØjã ÒØÔÕÞ åÐàÔÒÕàa, ØÛØ ÔÐ ÞÜÞÓãûØ ÕÜãÛÐæØjã âÐáâÕàÐ ×Ð "
-"ÜØè ÝÐ âÐáâÐâãàØ ×ÑÞÓ \n"
-"çÕáâÞÓ ÝÕÔÞáâÐâÚÐ ÔàãÓÞÓ Ø âàeûÕÓ âÐáâÕàÐ ÝÐ Apple ÜØèÕÒØÜa.  ÁÛÕÔØ ßÐà \n"
-"ßàØÜÕàa:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: ¾ÒÐ ÞßæØjÐ áÕ ÜÞÖÕ ÚÞàØáâØâØ ØÛØ ×Ð ßÞÔØ×ÐúÕ ØÝØæØjÐÛÝØå ÜÞÔãÛa, "
-"ßàe ÝÕÓÞ jÕ boot \n"
-"ãàÕòÐø ÔÞáâãßÐÝ, ØÛØ ×Ð ßÞÔØ×ÐúÕ ramdisk image ×Ð áâÐàâaúÕ ã "
-"åØâÝØÜáØâãÐæØjÐÜa.\n"
-"\n"
-"\n"
-"  - Initrd-ÒÕÛØçØÝa: ÒÕÛØçØÝa default ramdisk jÕ ÓÕÝÕàÐÛÝÞ 4096 ÑÐjâa.  "
-"ÃÚÞÛØÚÞ ÒÐÜ âàÕÑa\n"
-"ÐÛÞæØàaúÕ ÒÕÛØÚÞÓ ramdisk-a, ÞÒÐ ÞßæØjÐ ÜÞÖÕ ÑØâØ ÚÞàØáÝa.\n"
-"\n"
-"\n"
-"  - Read-write: ½ÞàÜÐÛÝÞ áe 'root' ßÐàâØæØjÐ ØÝØæØjÐÛÝÞ ßÞáâÐÒùÐ ÚÐÞ read-"
-"only, ÔÐ ÑØ ÞÜÞÓãûØÛa\n"
-"ßàÞÒÕàã ÔÐâÞâeçÝÞÓ áØáâÕÜÐ ßàÕ ÝÕÓÞ áØáâÕÜ ßÞáâÐÝÕ 'ÐÚâØÒÐÝ'.  ¾ÒÔÕ ÜÞÖÕâÕ "
-"ßÞÝØèâØâØ ÞÒã ÞßæØjã.\n"
-"\n"
-"\n"
-"  - NoVideo: ÃÚÞÛØÚÞ áÕ Apple ÒØÔÕÞ åÐàÔÒÕà ßÞÚaÖÕ ÒÕÞÜa ßàÞÑÛÕÜÐâØçÝØÜ, "
-"ÜÞÖÕâe\n"
-"Ø×ÐÑàÐâØ ÞÒã ÞßæØjã ÔÐ ÑØ áâÐàâÐÛØ áØáâÕÜ ã 'novideo' ÜÞÔã, áÐ ÞáÝÞÒÝÞÜ "
-"framebuffer ßÞÔàèÚÞÜ.\n"
-"\n"
-"\n"
-"  - Default: ºÐÚÞ jÕ ÞÒÞ default Linux áÕÛÕÚæØja, ÔÞÒÞùÝÞ jÕ ÔÐ áÐÜÞ\n"
-"ßàØâØáÝÕâe ENTER ßàØ yaboot ßàÞÜßâã.  ¾ÒÐj ãÝÞá ûÕ âÐÚÞòÕ ÑØâØ ÔÞÔÐâÝÞ "
-"Þ×ÝaçÕÝ áa '*', ãÚÞÛØÚÞ\n"
-"ßàØâØáÝÕâe TAB ÔÐ ÑØ ÒØÔÕÛØ áâÐàâÝã áÕÛÕÚæØjã."
-
-#: ../../help.pm_.c:765
-#, fuzzy
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot jÕ áâÐàâÕà NewWorld MacIntosh åÐàÔÒÕà. ¾Ý ÜÞÖÕ Ôa ßÞÚàÕÝÕ\n"
-"GNU/Linux, MacOS, ØÛØ MacOSX, ãÚÞÛØÚÞ áã ßàØáãâÝØ ÝÐ ÒaèÞj ÜaèØÝØ.\n"
-"½ÞàÜÐÛÝÞ, ÞÒØ ÔàãÓØ ÞßÕàÐâØÒÝØ áØáâÕÜØ áÕ áÜÐâàÐjã ÚÞàÕÚâÝÞ ÔÕâÕÚâÞÒÐÝØ Ø \n"
-"ØÝáâÐÛØàÐÝØ. ÃÚÞÛØÚÞ âÞ ÝØjÕ áÛãçÐj, ÜÞÖÕâÕ àãçÝÞ ÔÞÔÐâØ ãÝÞá ÝÐ ÞÒÞÜ\n"
-"ÕÚàÐÝã. ±ãÔØâÕ ßaÖùØÒØ ßàØ Ø×ÑÞàã ßÐàÐÜÕâÐàa.\n"
-"\n"
-"\n"
-"¾áÝÞÒÝÕ ÞßæØjÕ Yaboot-a áã:\n"
-"\n"
-"\n"
-"  - ¸ÝØæØjÐÛÝÐ ßÞàãÚa: JÕÔÝÞáâÐÒÝÐ âÕÚáâãÐÛÝÐ ßÞàãÚa ÚÞjÐ áÕ ßàØÚÐ×ãje ßàÕ "
-"áâÐâàâÝÞÓ\n"
-"ßàÞÜßâa.\n"
-"\n"
-"\n"
-"  - Boot ãàÕòÐø: ÃÚÐ×ãjÕ ÓÔÕ ÖÕÛØâÕ ÔÐ áÜÕáâØâÕ ØÝäÞàÜÐæØjã ßÞâàÕÑÝã ×Ð \n"
-"áâÐàâaúe GNU/Linux-a. ³ÕÝÕàÐÛÝÞ ÓÛÕÔÐÝÞ, ÜÞàaûÕâÕ ÔÐ ßÞÔÕáØâe bootstrap "
-"ßÐàâØæØjã ßàe \n"
-"ÝÕÓÞ ßÞÔÕáØâÕ ÞÒã ØÝäÞàÜÐæØjã.\n"
-"\n"
-"\n"
-"  - ¾ÜÞÓãûÐ Firmware ßÐã×ã: ·Ð àÐ×ÛØÚã ÞÔ LILO-a, ßÞáâÞjÕ ÔÒÕ ÒàáâÕ ßaã×e \n"
-"yaboot-a.  ¿àÒÐ ßÐã×Ð áÕ ÜÕàØ ã áÕÚãÝÔÐÜÐ Ø ã âÞÜ ÒàÕÜÕÝã ÜÞÖÕâÕ \n"
-"ÑØàÐâØ Ø×Üeòã CD-a, OF áâÐàâa, MacOS, ØÛØ Linux-a.\n"
-"\n"
-"\n"
-"  - ¿Ðã×Ð ßàØ áâÐàâaúã ÚÕàÝÕÛa: ¾ÒÐ ßÐã×Ð jÕ áÛØçÝa ßÐã×Ø ÚÞÔ LILO "
-"áâÐàâÕàa.  ½ÐÚÞÝ \n"
-"Ø×ÑÞàÐ Linux-a, ØÜaûÕâÕ ßÐã×ã ÞÔ 0.1 áÕÚãÝÔe ßàÕ ÝÕÓÞ èâÞ áÕ áÕÛÕÚâãje\n"
-"default ÞßØá ÚÕàÝÕÛa.\n"
-"\n"
-"\n"
-"  - ¾ÜÞÓãûØ áâÐàâaúÕ CD-a ?: ÃÚÞÛØÚÞ Þ×ÝaçØâÕ ÞÒã ÞßæØjã ÜÞûØ ûÕâÕ ÔÐ "
-"Ø×ÐÑÕàÕâe 'C' ×a CD ßàØ\n"
-"ßàÒÞÜ áâÐàâÝÞÜ ßàÞÜßâã.\n"
-"\n"
-"\n"
-"  - ¾ÜÞÓãûØ OF áâÐàâaúÕ?: ÃÚÞÛØÚÞ Þ×ÝaçØâÕ ÞÒã ÞßæØjã ÜÞûØ ûÕâÕ ÔÐ Ø×ÐÑÕàÕâe "
-"'N' ×a ¾pen\n"
-"Firmware ßàØ ßàÒÞÜ áâÐàâÝÞÜ ßàÞÜßâã.\n"
-"\n"
-"\n"
-"  - Default OS: ¼ÞÖÕâÕ ÔÐ Ø×ÐÑÕàÕâÕ ÚÞjØ ÞßÕàÐâØÒÝØ áØáâÕÜ ûÕ ÑØâØ ßÞÚàÕâÐÝ "
-"ÚÐÞ default ÚÐÔÐ Open Firmware \n"
-"ßÐã×Ð ×ÐÒàèØ."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"¸×ÐÑÕàØâÕ åÐàÔ ÔØáÚ ÚÞjØ ÖÕÛØâÕ ÔÐ Ø×ÑàØèÕâe ÔÐ ÑØ ØÝáâÐÛØàÐÛØ \n"
-"ÝÞÒã Mandrake Linux ßÐàâØæØjã. ±ãÔØâÕ ßaÖùØÒØ, áÒØ ßÞÔÐæØ ÝÐ úÕÜã ûÕ ÑØâØ "
-"Ø×ÓãÑùÕÝØ\n"
-"Ø ÝeûÕ áÕ ÜÞûØ ßÞÒàÐâØâØ."
-
-#: ../../help.pm_.c:832
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"ºÛØÚÝØâÕ ÝÐ \"à àÕÔã\" ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ Ø×ÑàØèÕâe áÒÕ ßÞÔÐâÚe Ø \n"
-"ßÐàâØæØjÕ ÝÐ ÞÒÞÜ åÐàÔ ÔØáÚã.±ãÔØâÕ ßaÖùØÒØ, ßáÛÕ ÚÛØÚÐ ÝÐ \"à àÕÔã\", ÒØ\n"
-"ÝeûÕâÕ ÜÞûØ ÔÐ ßÞÒàÐâØâÕ ÑØÛÞ ÚÞjØßÞÔÐâÐ ØÛØ ßÐàâØæØjã ÝÐ åÐàÔ ÔØáÚã,\n"
-"ßÐ Ø ÑØÛÞ ÚÞje Windows ßÞÔÐâÚe.\n"
-"\n"
-"\n"
-"ºÛØÚÝØâÕ ÝÐ \"¿ÞÝØèâØ\" ÔÐ ÑØ ßÞÝØèâØ ÞÒã ÞßÕàÐæØjã ÑÕ× ÓãÑùeúÐ ßÞÔÐâÐÚÐ Ø\n"
-"ßÐàâØæØjÐ ÚÞjÕ áã ßàØáãâÝÕ ÝÐ ÞÒÞÜ åÐàÔ ÔØáÚã."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:420
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"²Ø áâÕ Ø×ÐÑàÐÛØ áÛÕÔÕóÕ áÕàÒÕàÕ: %s\n"
-"\n"
-"\n"
-"¾ÒØ áÕàÒÕàØ áÕ ÐÚâØÒØàÐøã ßÞ ÞáÝÞÒÝÞø ßÞáâÐÒæØ. ¾ÝØ ÝÕÜÐøã ßÞ×ÝÐâØå "
-"áØÓãàÝÞáÝØå\n"
-"ÝÕÔÞáâÐâÐÚÐ, ÐÛØ áÕ ØßÐÚ ÜÞÓã ßÞøÐÒØâØ ÝÕÚØ ÝÞÒØ. ÃÚÞÛØÚÞ áÕ âÞ ÔÕáØ, ÜÞàÐâÕ "
-"Øå ÐÖãàØàÐâØ\n"
-"èâÞ øÕ ßàÕ ÜÞÓãóÕ.\n"
-"\n"
-"\n"
-"´Ð ÛØ ×ÐØáâÐ ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ ÞÒÕ áÕàÒØáÕ?\n"
-
-#: ../../install_any.pm_.c:456
-msgid "Can't use broadcast with no NIS domain"
-msgstr "½ØøÕ ÜÞÓãû ßàÕÝÞá ÑÕ× NIS ÔÞÜÕÝÐ"
-
-#: ../../install_any.pm_.c:792
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "ÃÑÐæØâÕ FAT äÞàÜÐâØàÐÝã ßàÐ×Ýã ÔØáÚÕâã ã ãàÕòÐø %s"
-
-#: ../../install_any.pm_.c:796
-msgid "This floppy is not FAT formatted"
-msgstr "¾ÒÐ ÔØáÚÕâÐ ÝØje äÞàÜÐâØàÐÝÐ áÐ FAT áØáâÕÜÞÜ"
-
-#: ../../install_any.pm_.c:808
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"´Ð ÑØ ÚÞàØáâØÛØ ÞÒÐj Ø×ÑÞà ×Ð çãÒaúÕ áÕÛÕÚæØjÕ ßÐÚÕâa, Ø×ÐÑÕàØâÕ ØÝáâÐÛÐæØjã "
-"áa ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:830 ../../partition_table.pm_.c:741
-#, c-format
-msgid "Error reading file %s"
-msgstr "³àÕèÚÐ ÚÞÔ ÞâÒÐàÐúÐ ÔÐâÞâÕÚa %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:327
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:288 ../../interactive.pm_.c:310
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:141 ../../interactive_stdio.pm_.c:142
-#: ../../my_gtk.pm_.c:420 ../../my_gtk.pm_.c:721 ../../my_gtk.pm_.c:743
-msgid "Ok"
-msgstr "Ã àÕÔã"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"½ÕÚÕ åÐàÔÒÕàáÚÕ ÚÞÜßÞÝÕÝâÕ ã ÒaèÕÜ àaçãÝÐàã ×ÐåâÕÒÐjã ÞÔÓÞÒÐàÐjãûe ÔàÐjÒÕàe "
-"ÔÐ ÑØ ÝÞàÜÐÛÝÞ äãÝÚæØÞÝØáÐÛe.\n"
-"¸ÝäÞàÜÐæØjÕ Þ úØÜÐ ÜÞÖÕâÕ ßàÞÝaûØ ÝÐ: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"¼ÞàÐâÕ ØÜÐâØ  root ßÐàâØæØjã.\n"
-"·Ð ÞÒÞ, ÚàÕØàÐøâÕ ßÐàâØæØøã (ØÛØ ÚÛØÚÝØâÕ ÝÐ ßÞáâÞøÕûã).\n"
-"·ÐâØÜ Ø×ÐÑÕàØâÕ \"ÂÐçÚÐ ÜÞÝâØàÐúÐ\" Ø ßÞÔÕáØâÕ ÝÐ `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "¼ÞàÐâÕ ØÜÐâØ swap ßÐàâØæØøã"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"ÅÜ, ÝÕÜÐ swap ßÐàâØæØøÕ\n"
-"\n"
-"ÁÒÕøÕÔÝÞ ÝÐáâÐÒØâØ ÔÐùÕ ?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "¼ÞàÐâÕ ØÜÐâØ FAT ßÐàâØæØøã ÜÞÝâØàÐÝã ã /boot/efi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "ºÞàØáâØ áÛÞÑÞÔÐÝ ßàÞáâÞà"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "½ÕÜÐ ÔÞÒÞùÝÞ áÛÞÑÞÔÝÞÓ ßàÞáâÞàÐ ×Ð ÐÛÞæØàaúÕ ÝÞÒØå ßÐàâØæØja"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "ºÞàØáâØ ßÞáâÞjeûã ßÐàâØæØøã"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "½ÕÜÐ ÝØ jeÔÝÕ ßÐàØâØæØjÕ ×Ð àÐÔ"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "ºÞàØáâØ Windows ßÐàâØæØjã ×Ð loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "ºÞøã ßÐàâØæØøã ÖÕÛØâÕ ÔÐ ÚÞàØáØâÕ ×Ð Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "¸×ÐÑÕàØâÕ ÒÕÛØçØÝã"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "²ÕÛØçØÝÐ Root ßÐàâØæØjÕ ã MB:"
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "²ÕÛØçØÝÐ Swap ßÐàâØæØjÕ ã MB:"
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "ºÞàØáØâØ áÛÞÑÞÔÐÝ ßàÞáâÞà ÝÐ Windows ßÐàâØæØjØ"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "ºÞøÞj ßÐàâØæØøØ  ÖÕÛØâÕ ÔÐ ßàÞÜÕÝØâÕ ÒÕÛØçØÝã?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "¿àÞàÐçãÝÐÒÐÜ ÓàÐÝØæÕ Windows äÐøÛ-áØáâÕÜÐ"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"¿àÞÓàÐÜ ×Ð ßàÞÜÕÝã ÒÕÛØçØÝÕ FAT ßÐàØâæØja ÝÕ ÜÞÖÕ ÔÐ ãßàÐÒùÐ ÒaèÞÜ "
-"ßÐàâØæØjÞÜ, \n"
-"×ÑÞÓ áÛÕÔeûÕ ÓàeèÚe: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"²aèÐ Windows ßÐàâØæØjÐ jÕ ßàÕÒØèÕ äàÐÓÜÕÝâØàÐÝÐ, ßàÒÞ ßÞÚàÕÝØâÕ ``defrag''"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"¿°¶ª° !\n"
-"\n"
-"DrakX âàÕÑÐ ÔÐ Ø×ÜÕÝØ ÒÕÛØçØÝã Windows ßÐàâØæØøÕ. ±ãÔØâÕ ßÐÖùØÒØ: ÞÒÐ\n"
-"ÞßÕàÐæØøÐ øÕ ÞßÐáÝÐ. ÃÚÞÛØÚÞ âÞ ÔÞ áÐÔÐ ÝØáâÕ àÐÔØÛØ, ßàÒÞ âàÕÑÐ ÔÐ Ø×aòÕâÕ "
-"Ø× ØÝáâÐÛÐæØjÕ,ßÞÚàÕÝÕâÕ ßÞÔ Windows-ÞÜ\n"
-"scandisk (ÕÒÕÝâãÐÛÝÞ Ø defrag), Ð ÞÝÔÐ ßÞÝÞÒÞ ßÞÚàÕÝØâÕ ØÝáâÐÛÐæØjã.\n"
-"°ÚÞ áâÕ áØÓãàÝØ, ßàØâØáÝØâÕ ¾Ú (à àÕÔã)."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "ºÞjã ÒÕÛØçØÝã ÖÕÛØâe ÔÐ ×ÐÔàÖØâÕ ×Ð ßàÞ×Þàe"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "ßÐàâØæØøÐ %s "
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT Ø×ÜÕÝÐ ÒÕÛØçØÝÕ ÝÕãáßÕÛÐ: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"½Õ ßÞáâÞje FAT ßÐàâØæØjÕ ÚÞjØÜa áÕ ÜÞÖÕ ßàÞÜÕÝØâØ ÒÕÛØçØÝa ØÛØ ÚÞjÕ áÕ ÜÞÓã "
-"ÚÞàØáØâØâØ ×a loopback (ØÛØ ÝÕÜÐ ÔÞÒÞùÝÞ áÛÞÑÞÔÝÞÓ ßàÞáâÞàa)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "¸×ÑàØèØ æÕÛØ ÔØáÚ"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "ÃÚÛÞÝØ Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"¸ÜÐâÕ ÒØèÕ ÞÔ jÕÔÝÞÓ åÐàÔ ÔØáÚÐ, ÝÐ ÚÞjØ ÞÔ úØå ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ "
-"»ØÝãÚá ?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Á²µ ßÞáâÞjeûÕ ßÐàâØæØjÕ Ø ßÞÔÐæØ ÝÐ ÔØáÚã %s ûÕ ÑØâØ Ø×ÓãÑùÕÝØ"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Custom ÔØáÚ ßÐàâØæØÞÝØàaúe"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "ºÞàØáâØ fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"ÁÐÔa ÜÞÖÕâÕ ßÐàâØæØÞÝØàÐâØ Òaè %s åÐàÔ ÔØáÚ ãàÕòÐø\n"
-"ºaÔa ×ÐÒàèØâÕ,ÝÕ ×ÐÑÞàÐÒØâÕ ÔÐ ßÞâÒàÔØâÕ ÚÞàØáâeûØ `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "½ÕÜÐâÕ ÔÞÒÞùÝÞ áÛÞÑÞÔÝÞÓ ßàÞáâÞàa ÝÐ Windows ßÐàâØæØjØ"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "½Õ ÜÞÓã ÔÐ ßàÞÝaòÕÜ áÛÞÑÞÔÐÝ ßàÞáâÞà ×Ð ØÝáâÐÛØàaúÕ"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX çÐàÞÑúÐÚ ×Ð ßÐàâØæØÞÝØàaúÕ jÕ ßàÞÝaèÐÞ áÛÕÔeûÐ àeèeúÐ:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "¿ÐàâØæØÞÝØàaúÕ ÝØjÕ ãáßÕÛÞ : %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "¿àØáâãßÐÜ  ÜàÕÖã"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "¾ÔáâãßÐÜ ÞÔ ÜàÕÖe"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"³àÕèÚÐ, ÐÛØ ÝÕ×ÝÐÜ ÚÐÚÞ ÔÐ øÕ àÐ×àÕèØÜ.\n"
-"½ÐáâÐÒØâÕ ÝÐ ÒÐè àØ×ØÚ!"
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "´ãßÛØàÐÝa âÐçÚÐ ÜÞÝâØàÐúÐ %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"½ÕÚØ ÒaÖÝØ ßÐÚÕâØ ÝØáã ÔÞÑàÞ ØÝáâÐÛØàÐÝØ.\n"
-"²aè cdrom ãàeòÐj ØÛØ cd áã ÝÕØáßàÐÒÝØ.\n"
-"¿àÞÒÕàØâe cdrom ÝÐ ØÝáâÐÛØàÐÝÞÜ ÚÞÜßjãâÕàã ÚÞàØáâeûe \"rpm -qpl Mandrake/"
-"RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:463
-#, c-format
-msgid "Welcome to %s"
-msgstr "´ÞÑàÞèÛØ ã  %s"
-
-#: ../../install_steps.pm_.c:510 ../../install_steps.pm_.c:714
-msgid "No floppy drive available"
-msgstr "½ÕßàØáâãßÐçÐÝ ÔØáÚÕâÝØ ãàÕòÐø"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "¿ÞÚàÕûÕÜ ÚÞàÐÚ `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "¸×ÐÑÕàØâÕ ÒÕÛØçØÝã ÚÞÜßÞÝÕÝâØ ×Ð ØÝáâÐÛÐæØøã"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "ÃÚãßÝÐ ÒÕÛØçØÝÐ: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Version: %s\n"
-msgstr "²Õà×ØøÐ: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:390
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "²ÕÛØçØÝÐ: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:483
-#: ../../install_steps_interactive.pm_.c:539
-msgid "Choose the packages you want to install"
-msgstr "¸×ÐÑÕàØ ßÐÚÕâÕ ×Ð ØÝáâÐÛÐæØøã"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "¸ÝäÞ"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:459
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Install"
-msgstr "¸ÝáâÐÛØàÐø"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:499
-#: ../../install_steps_interactive.pm_.c:731
-msgid "Installing"
-msgstr "¸ÝáâÐÛØàÐÜ"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "¼ÞÛØÜ áÐçÕÚÐøâÕ"
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:512
-msgid "Time remaining "
-msgstr "¿àÕÞáâÐÛÞ ÒàÕÜÕ"
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "ÃÚãßÝÞ ÒàÕÜÕ"
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:731
-msgid "Preparing installation"
-msgstr "¿àØßàÕÜÐÜ ØÝáâÐÛÐæØøã"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:560
-#, c-format
-msgid "Installing package %s"
-msgstr "¸ÝáâÐÛØàÐÜ ßÐÚÕâ %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:616
-#: ../../install_steps_gtk.pm_.c:620 ../../install_steps_interactive.pm_.c:768
-#: ../../install_steps_interactive.pm_.c:772
-msgid "Go on anyway?"
-msgstr "ÁÒÕøÕÔÝÞ ÝÐáâÐÒØâØ ÔÐùÕ ?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:616
-#: ../../install_steps_interactive.pm_.c:768
-msgid "There was an error ordering packages:"
-msgstr "³àÕèÚÐ ã ÛØáâØ ßÐÚÕâÐ:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "´Ð ÛØ ÔÐ ÚÞàØáâØÜ ßÞáâÞøÕûã ÚÞÝäØÓãàÐæØøã ×Ð X11 ?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"²aè áØáâÕÜ ØÜÐ ÜaúÐÚ áÝÐÓÕ. ÃáÛÕÔ âÞÓÐ ÜÞÖÕâÕ ØÜaâØ ßàÞÑÛÕÜÐ ßàØ "
-"ØÝáâÐÛÐæØjØ\n"
-"Mandrake Linux. ÃÚÞÛØÚÞ áÕ ÞÝØ ßÞjÐÒe, ÜÞÖÕâÕ ßàÞÑÐâØ âÕÚáâãÐÛÝã "
-"ØÝáâÐÛÐæØjã. ´Ð ÑØ âÞ ßÞáâØÓÛØ,\n"
-"ßàØâØáÝØâe `F1' ßàØ áâÐàâaúã áÐ CDROM-a, Ð ÞÝÔÐ ãÚãæÐjâe  `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:217
-msgid "Install Class"
-msgstr "¸ÝáâÐÛÐæØÞÝe ÚÛÐáÕ"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "¼ÞÛØÜ ÒÐá ÔÐ Ø×ÐÑÕâÕàâÕ jÕÔÝã ÞÔ áÛÕÔeûØå ØÝáâÐÛÐæØÞÝØå ÚÛÐáa:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "ÃÚãßÝÐ ÒÕÛØçØÝa ÓàãßÐ ÚÞjÕ áâe Ø×ÐÑàÐÛØ Ø×ÝÞáØ  %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ ÜaúÕ,\n"
-"Ø×ÐÑÕàØâÕ ßàÞæÕÝâãÐÛÝÞ ÑàÞj ßÐÚÕâÐ ÚÞjÕ ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ.\n"
-"\n"
-"¿àØ ÜÐÛÞÜ ßàÞæÕÝâã ûÕ áÕ ØÝáâÐÛØàÐâØ áÐÜÞ ÒÐÖÝØ ßÐÚÕâØ;\n"
-"ÔÞÚ ûÕ ßàØ ßàÞæÕÝâã ÞÔ 100%% ÑØâØ ØÝáâÐÛØàÐÝØ áÒØ ßÐÚÕâØ."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"½Ð ÒaèÕÜ ÔØáÚã ØÜÐ ÜÕáâÐ áÐÜÞ ×a %d%% ÞÒØå ßÐÚÕâa.\n"
-"\n"
-"ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ ÜaúÕ ÞÔ ÞÒÞÓa,\n"
-"Ø×ÐÑÕàØâÕ ßàÞæÕÝâãÐÛÝÞ ÑàÞj ßÐÚÕâÐ ÚÞjÕ ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ.\n"
-"¿àØ ÜÐÛÞÜ ßàÞæÕÝâã ûÕ áÕ ØÝáâÐÛØàÐâØ áÐÜÞ ÒÐÖÝØ ßÐÚÕâØ;\n"
-"ÔÞÚ ûÕ ßàØ ßàÞæÕÝâã ÞÔ  %d%% ÑØâØ ØÝáâÐÛØàÐÝÞ ÜÐÚáØÜÐÛÝÞ ÜÞÓãû ÑàÞj ßÐÚÕâa"
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "¼ÞûØ ûÕâÕ ÔÐ Øå ßàÕæØ×ÝØøÕ ÑØàÐâÕ ã áÛÕÔÕûeÜ ÚÞàÐÚã."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "¿àÞæÕÝÐâ ßÐÚÕâa ×Ð ØÝáâÐÛÐæØøã"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:649
-msgid "Package Group Selection"
-msgstr "¾ÔÐÑØà ÓàãßÐ ßÐÚÕâÐ"
-
-#: ../../install_steps_gtk.pm_.c:322 ../../install_steps_interactive.pm_.c:664
-msgid "Individual package selection"
-msgstr "¿ÞjÕÔØÝaçÝÞ ÑØàaúÕ ßÐÚÕâa"
-
-#: ../../install_steps_gtk.pm_.c:345 ../../install_steps_interactive.pm_.c:628
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "ÃÚãßÝÐ ÒÕÛØçØÝÐ: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:387
-msgid "Bad package"
-msgstr "»Þè ßÐÚÕâ"
-
-#: ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Name: %s\n"
-msgstr "¸ÜÕ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:391
-#, c-format
-msgid "Importance: %s\n"
-msgstr "²aÖÝÞ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:413
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "½Õ ÜÞÖÕâÕ áÕÛÕÚâÞÒÐâØ ÞÒÐj ßÐÚÕâ jÕà ÝÕÜÐ ÒØèÕ áÛÞÑÞÔÝÞÓ ßàÞáâÞàa"
-
-#: ../../install_steps_gtk.pm_.c:418
-msgid "The following packages are going to be installed"
-msgstr "ÁÛeÔeûØ ßÐÚÕâØ âàÕÑÐ ÔÐ ÑãÔã ØÝáâÐÛØàÐÝØ"
-
-#: ../../install_steps_gtk.pm_.c:419
-msgid "The following packages are going to be removed"
-msgstr "ÁÛÕÔeûØ ßÐÚÕâØ ûÕ ÑØâØ Ø×ÑàØáÐÝØ"
-
-#: ../../install_steps_gtk.pm_.c:431
-msgid "You can't select/unselect this package"
-msgstr "½Õ ÜÞÖÕâÕ áÕÛÕÚâÞÒÐâØ/ÔÕáÕÛÕÚâÞÒÐâØ ÞÒÐj ßÐÚÕâ"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "¾ÒÞ jÕ ÞÑÐÒÕ×ÝØ ßÐÚÕâ,Ø ÝÕ ÜÞÖe ÑØâØ ÔÕáÕÛÕÚâÞÒÐÝ"
-
-#: ../../install_steps_gtk.pm_.c:445
-msgid "You can't unselect this package. It is already installed"
-msgstr "¼ÞÖÕâÕ ÔÕáÕÛÕÚâÞÒÐâØ ÞÒÐj ßÐÚÕâ jÕà jÕ Òeû ØÝáâÐÛØàÐÝ"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"¾ÒÐj ßÐÚÕâ ÜÞàÐ ÑØâØ aÖãàØàÐÝ\n"
-"´Ð ÛØ áØÓãàÝÞ ÖÕÛØâÕ ÔÐ ÓÐ ÔÕáÕÛÕÚâãjÕâe ?"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "½Õ ÜÞÖÕâÕ ÔÕáÕÛÕÚâÞÒÐâØ ÞÒÐj ßÐÚÕâ.¾Ý ÜÞàÐ ÑØâØ aÖãàØàÐÝ"
-
-#: ../../install_steps_gtk.pm_.c:458
-msgid "Show automatically selected packages"
-msgstr "°ãâÞÜÐâáÚØ ßàØÚÐÖØ Ø×ÐÑàÐÝÕ ßÐÚÕâe"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Load/Save on floppy"
-msgstr "ÃçØâÐø/ÁÝØÜØ ÝÐ ÔØáÚÕâã"
-
-#: ../../install_steps_gtk.pm_.c:463
-msgid "Updating package selection"
-msgstr "°ÖãàØàÐúÕ áÕÛÕÚæØøÕ ßÐÚÕâÐ"
-
-#: ../../install_steps_gtk.pm_.c:468
-msgid "Minimal install"
-msgstr "¼ØÝØÜÐÛÝÞ ØÝáâÐÛØàÐø"
-
-#: ../../install_steps_gtk.pm_.c:505
-msgid "Estimating"
-msgstr "¿àÞæÕúãøÕÜ"
-
-#: ../../install_steps_gtk.pm_.c:524
-msgid "Please wait, preparing installation"
-msgstr "ÁaÜÞ ÜÞÜÕÝÐâ, ßàØßàÕÜÐÜ ØÝáâÐÛÐæØøã"
-
-#: ../../install_steps_gtk.pm_.c:555
-#, c-format
-msgid "%d packages"
-msgstr "%d ßÐÚÕâÐ"
-
-#: ../../install_steps_gtk.pm_.c:601 ../../install_steps_interactive.pm_.c:178
-#: ../../install_steps_interactive.pm_.c:755
-#: ../../standalone/drakautoinst_.c:202
-msgid "Accept"
-msgstr "¿àØåÒÐâØ"
-
-#: ../../install_steps_gtk.pm_.c:601 ../../install_steps_interactive.pm_.c:178
-#: ../../install_steps_interactive.pm_.c:755
-msgid "Refuse"
-msgstr "¾ÔÑÐæØ"
-
-#: ../../install_steps_gtk.pm_.c:602 ../../install_steps_interactive.pm_.c:756
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"¿àÞÜÕÝØâÕ Òaè Cd-Rom!\n"
-"\n"
-"ÃÑÐæØâe Òaè CD Þ×ÝaçÕÝ áÐ \"%s\" ã ßÞÓÞÝ Ø ßàØâØáÝØâÕ \"à àÕÔã\" ÚÐÔa áâÕ "
-"áßàÕÜÝØ.\n"
-"ÃÚÞÛØÚÞ ÓÐ ÝÕÜÐâÕ ßàØâØáÝØâÕ  ¿ÞÝØèâØ."
-
-#: ../../install_steps_gtk.pm_.c:620 ../../install_steps_interactive.pm_.c:772
-msgid "There was an error installing packages:"
-msgstr "³àÕèÚÐ ßàØ ØÝáâÐÛÐæØjØ ßÐÚÕâa:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"ÃßÞ×Þàeúe !\n"
-"\n"
-"¿aÖùØÒÞ ßàÞçØâÐjâÕ ÔÞÛÕ ÝÐÒÕÔÕÝÕ ãáÛÞÒÕ. ÃÚÞÛØÚÞ áÕ ÝÕ áÛaÖÕâÕ áÐ ÑØÛÞ "
-"ÚÞjØÜ \n"
-"ÔÕÛÞÜ, ÞÝÔÐ ÝÕÜÐâÕ ÞÔÞÑàeúÕ ×Ð ØÝáâÐÛØàaúÕ áÛÕÔeûÕÓ CD-a. ¿àØâØáÝØâÕ "
-"'¾ÔÑØjÐÜ' \n"
-"ÔÐ ÑØ ÝÐáâÐÒØÛØ ØÝáâÐÛÐæØjã ÑÕ× ãßÞâàÕÑÕ âØå CD ÜÕÔØja.\n"
-"\n"
-"\n"
-"½ÕÚÕ ÚÞÜßÞÝÕÝâÕ áÐÔàÖÐÝÕ ã áÛÕÔeûØÜ CD ÜÕÔØjÐÜÐ ÝØáã ßÞÔ\n"
-"GPL »ØæÕÝæÞÜ ØÛØ áÛØçÝØÜ ãÓÞÒÞàØÜÐ. ÁÒÐÚÐ âÐÚÒÐ ÚÞÜßÞÝÕÝâÐ jÕ ÞÝÔÐ "
-"ãáÛÞÒùÕÝÐ\n"
-"ãáÛÞÒØÜÐ Ø ãÓÞÒÞàØÜÐ áÞßáâÕÒÕÝÕ ÛØÝæÕÝæÕ. \n"
-"¿aÖùØÒÞ ßàÞçØâÐjâÕ Ø ãßÞ×ÝÐjâÕ áÕ áÐ âÐÚÒØÜ áßÕæØäØçÝØÜ ÛØæÕÝæÐÜÐ ßàe \n"
-"ÝÕÓÞ ãÞâàÕÑØâÕ ØÛØ àÕÔØáâàØÑãØàÐâÕ ßÞÜÕÝãâÕ ÚÞÜßÞÝÕÝâe. \n"
-"ÂÐÚÒÕ ÛØæÕÝæÕ ûÕ ã ÓÛÐÒÝÞÜ ×ÐÑàaúØÒÐâØ âàÐÝáäÕà, ÚÞßØàÐúe \n"
-"(ÞáØÜ ×Ð áÒàåã backup-Ð ßÞÔÐâÐÚa), àÕÔØáàØÑãæØjã, ÝÐåÝÐÔÝã ßàÞÜÕÝã, \n"
-"àÐáâÐÒùaúe, Ôe-ÚÞÜßÐjÛØàaúe ØÛØ ÜeúaúÕ ÚÞÜßÞÝÕÝâØ. \n"
-"±ØÛÞ ÚÞjØ ÔÕÞ ãÓÞÒÞàÐ ÚÞjØ ÝØjÕ ØáßÞèâÞÒÐÝ ØáâÞÒàÕÜÕÝÞ ãÚÛaúÐ Ø ÞáâÐÛÐ ÒaèÐ "
-"ßàÐÒa\n"
-"ã ÔÐâÞj ÛØæÕÝæØ. ÃÚÞÛØÚÞ ÒÐÜ ÞÔàeòÕÝÐ ÛØæÕÝæÐ ÝÕ ÓÐàÐÝâãjÕ âÐÚÒÐ\n"
-"ßàÐÒa, ÞÑØçÝÞ ÝÕ ÜÞÖÕâÕ ØÝáâÐÛØàÐâØ ßàÞÓàÐÜÕ ÝÐ ÒØèÕ ÞÔ jÕÔÐÝÞÓ\n"
-"ÐØÐâÕÜa, ØÛØ Øå ßàØÛÐÓÞÔØâØ ÔÐ áÕ ÜÞÓã ÚÞàØáâØâØ ÝÐ ÜàeÖØ. ÃÚÞÛØÚÞ áâÕ ã "
-"ÔØÛÕÜØ, ÜÞÛØÜÞ ÒÐá ÔÐ ÔØàÕÚâÝÞ \n"
-"ÚÞÝâÐÚâØàÐâÕ ÔØáâàØÑãâÕàÐ ØÛØ ÕÔØâÞàÐ ÚÞÜßÞÝÕÝâe. \n"
-"¿àÕÝÞá ÝÐ âàeûÕ ßàÞÓàÐÜÕ ØÛØ ÚÞßØàaúÕ âÐÚÒØå ÚÞÜßÞÝÕÝâØ ãÚùãçãjãûØ Ø\n"
-"ÔÞÚãÜÕÝâÐæØjã jÕ ÞÑØçÝÞ ×ÐÑàÐúÕÝ.\n"
-"\n"
-"\n"
-"ÁÒÐ ßàÐÒÐ ÝÐ ÚÞÜßÞÝÕÝâÕ ÝÐ áÛÕÔeûØÜ CD ÜÕÔØjÐÜÐ ßàØßÐÔÐjã úØåÞÒØÜ \n"
-"àÕáßÕÚâÐâØÒÝØÜ ÐãâÞàØÜÐ Ø ×aèâØûeÝÕ áã ×ÐÚÞÝØÜÐ Þ ØÝâÕÛÕÚâãÐÝÞj áÒÞjØÝØ Ø \n"
-"ßàÐÒØÜa ÚÞjØ áÕ ßàØÜeúãjã ÝÐ áÞäâÒÕàáÚÕ ßàÞÓàÐÜe.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "XÜ,ßÞjÐÒØÛÐ áÕ  ÓàÕèÚÐ"
-
-#: ../../install_steps_interactive.pm_.c:101
-msgid "License agreement"
-msgstr "»¸æÕÝæØàÐÝØ ãÓÞÒÞà"
-
-#: ../../install_steps_interactive.pm_.c:102
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"ÃßÞ×ÝÐÒaúe\n"
-"\n"
-"¾ßÕàÐâØÒÝØ áØáâÕÜ Ø ÔàãÓÕ ÚÞÜßÞÝÕÝâÕ ÔÞáâãßÝÕ ã Mandrake Linux "
-"ÔØáâàØÑãæØjØ \n"
-"ÝÐ Ôaùe ûÕ ÑØâØ ×ÒÐÝÕ \"ÁÞäâÒÕàáÚØ ¿àÞØ×ÒÞÔØ\" . ÁÞäâÒÕàáÚØ ßàÞØ×ÒÞÔØ "
-"ãkùãçãjã, ÐÛØ ÝØáã Ø \n"
-"ÞÓàÐÝØçÕÝØ Ýa, áÚãß ßàÞÓàÐÜa, ÜÕâÞÔa, ßàÐÒØÛÐ Ø ÔÞÚãÜÕÝâÐæØjã ÚÞjÐ je "
-"ÒÕ×ÐÝa×Ð ÞßÕàÐâØÒÝØ \n"
-"áØáâÕÜ Ø ÔàãÓÕ ÚÞÜßÞÝÕÝâÕ Mandrake Linux ÔØáâàØÑãæØje.\n"
-"\n"
-"\n"
-"1. »ØæÕÝæÝØ ãÓÞÒÞà\n"
-"\n"
-"¿aÖùØÒÞ ßàÞçØâÐjâÕ ÞÒÐj ÔÞÚãÜÕÝâ. ¾ÒÐj ÔÞÚãÜÕÝâ jÕ ÛØæÕÝæÝØ ãÓÞÒÞà "
-"Ø×ÜeòãØ×Üeòã ÒÐá Ø   \n"
-"MandrakeSoft S.A. ÚÞjØ ßÞÛaÖÕ ßàÐÒÞ ÝÐ ÁÞäâÒÕàáÚÕ ¿àÞØ×ÒÞÔe.\n"
-"¸ÝáâÐÛØàaúÕÜ, ÚÞßØàaúÕÜ ØÛØ ãßÞâàÕÑÞÜ ÁÞäâÒÕàáÚØå ¿àÞØ×ÒÞÔÐ ã ÑØÛÞ ÚÞÜ ÒØÔã, "
-"ÒØ ÕÚáßÛØæØâÝÞ \n"
-"ßàØåÒÐâÐâÕ Ø ßÞâßãÝÞ áÕ áÛaÖÕâÕ áÐ ßàØåÒÐâÐúÕÜ ßÞáâÐÒÚØ Ø ãáÛÞÒÐ Ø áâaúÐ ã "
-"ÞÒÞj »ØæÕÝæØ. \n"
-"ÃÚÞÛØÚÞ áÕ ÝÕ áÛaÖÕâÕ áÐ ÑØÛÞ ÚÞjØÜ ÔÕÛÞÜ »ØæÕÝæÕ, ÝÕÜÐâÕ ßàÐÒÞ Ôa "
-"ØÝáâÐÛØàÐâe, ÚÞßØàÐâÕ ØÛØ ÚÞàØáâØâe \n"
-"ÁÞäâÒÕàáÚÕ ßàÞØ×ÒÞÔe. \n"
-"±ØÛÞ ÚÞjØ ßÞÚãèÐj ØÝáâÐÛÐæØje, ÔãßÛØæØàaúÐ ØÛØ ãßÞâàÕÑÕ ÁÞäâÒÕàáÚØå "
-"¿àÞØ×ÒÞÔÐ ÝÐ ÝaçØÝ ÚÞjØ áÕ ÝÕ áÛaÖÕ áa \n"
-"ßÞáâÐÒÚÐÜÐ Ø ãáÛÞÒØÜÐ ÞÒÕ »ØæÕÝæe ûÕ ÒÞÔØâØ ÓãÑØâÚã ÒaèØå ßàÐÒÐ ßÞÔ ÞÒÞÜ \n"
-"»ØæÕÝæÞÜ. ½Ð ÞáÝÞÒã ÓãÑØâÚÐ »ØæÕÝæÕ, ÜÞàÐâÕ ÞÔÜÐå ãÝØèâØâØáÒÕ ÚÞßØje \n"
-"ÁÞäâÒÕàáÚØå ¿àÞØ×ÒÞÔa.\n"
-"\n"
-"\n"
-"2. ¾ÓàÐÝØçÕÝÐ ³ÐàÐÝæØja\n"
-"\n"
-"ÁÞäâÒÕàáÚØ ¿àÞØ×ÒÞÔØ Ø ßàÐâeûÐ ÔÞÚãÜÕÝâàÐæØja áã ÞÜÞÓãûÕÝÕ \"ÚÐÞ âÐÚÒe\", Ø "
-"ÑÕ× ÓÐàÐÝæØje, ÔÞ ÓàÐÝØæa \n"
-"ÚÞjÕ áã ÔÞ×ÒÞùÕÝÕ ×ÐÚÞÝÞÜ.\n"
-"MandrakeSoft S.A. Ýeûe, ã áÒØÜ ãáÛÞÒØÜÐ Ø ã ÓàÐÝØæÐÜÐ ×ÐÚÞÝa, ÑØâØ ÞÓÞÒÞàÐÝ "
-"×Ð ÑØÛÞ ÚÞjÕ áßÕæØjÐÛÝe,\n"
-"áÛãçÐjÝe, ÔØàÕÚâÝe ØÛØ ØÝÔØàÕÚâÝÕ èâÕâÕ (ãÚùãçãjãûØ ÝÕÞÓàÐÝØçÕÝeèâÕâÕ ØÛØ "
-"ÓãÑØâÚe \n"
-"ã ßÞáÛÞÒaúã, ßàÕÚØÔã ßÞáÛÞÒaúa, äØÝÐÝáØjáÚØÜ ÓãÑØæØÜa, ×ÐÚÞÝáÚe âàaÖúÕ Ø "
-"ÚÐ×Ýe ÚÞjÕ áã àÕ×ãÛâÐâ áãÔáÚe \n"
-"ÞÔÛãÚe, ØÛØ ×Ð ÑØÛÞ ÚÞjØ ÔàãÓØ ÓãÑØâÐÚ) ÚÞje ßàÞØ×ØÛÐ×e Ø× ãßÞâàÕÑe ØÛØ "
-"ÝÕÜÞÓãûÝÞáâØ ÚÞàØèûeúÐ ÁÞäâÒÕàáÚØå \n"
-"¿àÞØ×ÒÞÔa, çÐÚ ØÐÚÞ jÕ MandrakeSoft S.A. áÐÒÕâÞÒÐÞ Ø ãÚÐ×ØÒÐÞ ÝÐ ÜÞÓãûÝÞáâ "
-"ßÞjÐÒÕ âÐÚÒe \n"
-"èâÕâÕ.\n"
-"\n"
-"¾ÓàÐÝØçÕÝÐ ÞÔÓÞÒÞàÝÞáâØ ÒÕ×ÐÝe ×a ßÞáÕÔÞÒaúe ØÛØ ãßÞâàÕÑã ×ÐÑàaúÕÝÞÓ "
-"áÞäâÒÕàa ã ÝÕÚØÜ ×eÜùÐÜÐ\n"
-"\n"
-"´Þ ÓàÐÝØæÐ ÚÞjÕ áã ãáÛÞÒùÕÝÕ ×ÐÚÞÝÞÜ, MandrakeSoft S.A. ØÛØ úÕÓÞÒØ "
-"ÔØáâàØÑãâÕàØ ÝeûÕ, ÝØ ßÞÔ ÚÞjØÜ ãáÛÞÒØÜa, ÑØâØ \n"
-"ÞÔÓÞÒÞàÝØ ×Ð áßÕæØjÐÛÝÕ, ÝÐÜÕàÝÕ ÔØàÕÚâÝÕ ØÛØ ØÝÔØàÕÚâÝe èâÕâÕ(ãÚùãçãjãûØ "
-"ÝÕÞÓàÐÝØçÕÝe \n"
-"èâÕâÕ ØÛØ ÓãÑØâÚe ã ßÞáÛÞÒaúã, ßàÕÚØÔã ßÞáÛÞÒaúa, äØÝÐÝáØjáÚØÜ ÓãÑØæØÜa, "
-"×ÐÚÞÝáÚe âàaÖúÕ \n"
-"Ø ÚÐ×Ýe ÚÞjÕ áã àÕ×ãÛâÐâ áãÔáÚe ÞÔÛãÚe, ØÛØ ×Ð ÑØÛÞ ÚÞjØ ÔàãÓØ ÓãÑØâÐÚ) ÚÞje "
-"ßàÞØ×ØÛÐ×e \n"
-"Ø× ãßÞâàÕÑe ØÛØ ÝÕÜÞÓãûÝÞáâØ ÚÞàØèûeúÐ ÁÞäâÒÕàáÚØå ºÞÜßÞÝÕÝâØ ØÛØ ÚÞje "
-"ßàÞØ×ØÛÐ×e download-ÞÒÐÝØå áÞäâÒÕàáÚØå ÚÞÜßÞÝÕÝâØ \n"
-"ÑØÛÞ ÚÞÓ Mandrake Linux áÐjâÐ ÚÞjØ áã ×ÐÑàaúÕÝØ ØÛØ ÞÓàÐÝØçÕÝØ ã ÝÕÚØÜ "
-"×ÕÜùÐÜÐ ßÞ ÛÞÚÐÛÝØÜ ×ÐÚÞÝØÜa.\n"
-"¾ÒÐ ÞÓàÐÝØçÕÝÐ ßàÐÒÐ áÕ ßàØÜeúãjã, ÐÛØ ÝØáã Ø ÞÓàÐÝØçÕÝÐ Ýa,ÚàØßâÞÓàÐäáÚÕ "
-"ÚÞÜßÞÝÕÝâe \n"
-"ÚÞjÕ áÕ ÝÐÛÐ×Õ ã ÁÞäâÒÕàáÚØÜ ¿àÞØ×ÒÞÔØÜa.\n"
-"\n"
-"\n"
-"3. GPL Ø ×Ð úã ÒÕ×ÐÝÕ »ØæÕÝæe\n"
-"\n"
-"ÁÞäâÒÕàáÚØ ßàÞØ×ÒÞÔØ áÕ áÐáâÞje ÞÔ ÚÞÜßÞÝÕÝâØ ÚàÕØàÐÝØå ÞÔ áâàÐÝÕ àÐ×ÛØçâØå "
-"ÛØæÐ ØÛØ ÕÝâØâÕâa. ²eûØÝa  \n"
-"ÞÔ ÞÒØå ÚÞÜßÞÝÕÝâØ áÕ ÝÐÛÐ×Õ ßÞÔ ßÞáâÐÒÚÐÜÐ Ø ãáÛÞÒØÜÐ GNU ¾ßèâÕ JÐÒÝe \n"
-"»ØæÕÝæe, ÚÞjÐ áÕ ÞÔ áÐÔÐ ×ÞÒÕ  \"GPL\", ØÛØ áÛØçÝÕ ÛØæÕÝæÕ. ²eûØÝÐ ÞÒØå "
-"ÛØæÕÝæØ ÔÞ×ÒÞùÐÒÐ ãßÞâàÕÑã, \n"
-"ÔãßÛØæØàaúe, ÐÔÐßâÐæØjã ØÛØ àÕÔØáâàØÑãæØjã ÚÞÜßÞÝÕÝâØ ÚÞjÕ ÞÝÕ ÞÑãåÒÐâÐjã. "
-"¼ÞÛØÜÞ ²Ðá ÔÐ ßaÖùØÒÞ ßàÞçØââÕ ßÞáâÐÒÚe \n"
-"Ø ãáÛÞÒÕ ÛØæÕÝæÝÞÓ ãÓÞÒÞàÐ ×Ð áÒÐÚã ÚÞÜßÞÝÕÝâã ßàÕ ãßÞâàÕÑÕ ÑØÛÞ ÚÞje "
-"ÚÞÜßÞÝÕÝÕâe. ±ØÛÞ ÚÞjÕ ßØâaúe \n"
-"ÒÕ×ÐÝÞ ×Ð ÛØæÕÝæã ÚÞÜßÞÝÕÝâØ âàÕÑÐ ÔÐ ÑãÔÕ ÐÔàÕáØàÐÝÞ ÝÐ ÐãâÞàÐ ÚÞÜßÞÝÕÝâÕ Ð "
-"ÝÕÝa MandrakeSoft.\n"
-"¿àÞÓàÐÜØ ÚÞjÕ jÕ àÐ×ÒØÞ MandrakeSoft S.A. ßÞÔÛeÖã ßÞÔ GPL »ØæÕÝæã. "
-"´ÞÚãÜÕÝâÐæØjÐ ßØáÐÝÐ ÞÔ \n"
-"áâàÐÝÕ MandrakeSoft S.A. ßÞÔÛeÖÕ ßÞÔ ßÞáÕÑÝã ÛØæÕÝæã. ¼ÞÛØÜ ÔÐ ßÞÓÛÕÔÐâÕ "
-"ÔÞÚãÜÕÝâÐæØjã  \n"
-"×Ð ÔÕâaùe.\n"
-"\n"
-"\n"
-"4. ¿àÐÒÐ ÝÐ ¸ÝâÕÛÕÚâãÐÛÝã áÒÞjØÝã\n"
-"\n"
-"ÁÒÐ ßàÐÒÐ ÝÐ ÚÞÜßÞÝÕÝâÕ ÁÞäâÒÕàáÚØå ßàÞØ×ÒÞÔÐ ßàØßÐÔÐjã úØåÞÒØÜ ÐãâÞàØÜÐ Ø "
-"ÞÝa \n"
-"áã ×aèâØûeÝÐ ×ÐÚÞÝØÜÐ Þ ØÝâÕÛÕÚâãÐÛÝÞj áÒÞjØÝØ Ø ßàÐÒØÜÐ ÚÞjØ áÕ ßàØÜeúãjã "
-"ÝÐ áÞäâÒÕàáÚe ßàÞÓàÐÜe.\n"
-"MandrakeSoft S.A. jÕ àÕ×ÕàÒØáÐÞ áÒÞjÐ ßàÐÒÐ ÝÐ ÜÞÔØäØÚÞÒaúÕ ØÛØ ÐÔÐßâÐæØjã "
-"ÁÞäâÒÕàáÚØå¿àÞØ×ÒÞÔa, ÚÐÚÞ ×Ð æÕÛØÝã âÐÚÞ Ø ×a \n"
-"ÔÕÛÞÒe, ×Ð áÒÕ áÒÕ áÒàåÕ Ø áÒÕ ãßÞâàÕÑe.\n"
-"\"Mandrake\", \"Mandrake Linux\" Ø ßàØÔàãÖÕÝØ ÛÞÓÞâØßØ Ø Þ×ÝÐÚe MandrakeSoft "
-"S.A.  \n"
-"\n"
-"\n"
-"5. ·ÐÚÞÝáÚÐ ßàÐÒa \n"
-"\n"
-"ÃÚÞÛØÚÞ áÕ ÑØÛÞ ÚÞjØ ÔÕÞ ÞÒÞÓ ãÓÞÒÞàÐ Ø×ÑÕÓÐÒa, ÝÕÛÕÓÐÛÝÞ Ø ÒÐÝ  áãÔáÚÕ "
-"ÞÔÛãÚe, ÞÒÐj \n"
-"ÔÕÞ áÕ ØáÚùãçãjÕ Ø× ÞÒÞÓ ãÓÒÞàa. ¾ÑÐÒÕ×ÝØ áâÕ Ôa ßàØÜeúãjÕâeÞáâÐÛÕ ÔÕÛÞÒe "
-"ÞÒÞÓ\n"
-"ãÓÞÒÞàa.\n"
-"¿ÞáâÐÒÚÕ Ø ãáÛÞÒØ ÞÒÕ »ØæÕÝæÕ áã ÞÔàÕòÕÝØ ·ÐÚÞÝØÜÐ ÄàÐÝæãáÚe.\n"
-"ÁÒØ ÝÕáßÞàÐ×ãÜØ ÑØ âàÕÑÐÛØ ÑØâØ àeèÕÝØ ÒÐÝ áãÔa. ºÐÞ ßÞáÛÕÔúÕ \n"
-"áàÕÔáâÒÞ, ÝÕáßÞàÐ×ãÜØ ûÕ ÑØâØ ãßuûÕÝØ ÝÐ ÞÔÓÞÒÐàÐjãûÕ ÁãÔáÚÕ ãáâÐÝÞÒÕ ã "
-"¿ÐàØ×ã - ÄàÐÝæãáÚa.\n"
-"·Ð ÑØÛÞ ÚÞjÕ ßØâaúÕ ÚÞjÕ jÕ ÒÕ×ÐÝÞ ×Ð ÞÒÐj ÔÞÚãÜÕÝâ, ÚÞÝâÐÚâØàÐjâÕ  "
-"MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:198
-#: ../../install_steps_interactive.pm_.c:944
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "ÂÐáâÐâãàa"
-
-#: ../../install_steps_interactive.pm_.c:199
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "ºÞøØ  àÐáßÞàÕÔ âÐáâÐâãàÕ ÖÕÛØâÕ ?"
-
-#: ../../install_steps_interactive.pm_.c:200
-msgid "Here is the full list of keyboards available"
-msgstr "¾ÒÔÕ jÕ ßàÕÔáâÐÒùÕÝa æÕÛÐ ÛØáâÐ ÔÞáâãßÝØå âÐáâÐâãàa"
-
-#: ../../install_steps_interactive.pm_.c:217
-msgid "Which installation class do you want?"
-msgstr "ºÞjã  ØÝáâÐÛÐæØÞÝã ÚÛÐáã ÑØàÐâÕ ?"
-
-#: ../../install_steps_interactive.pm_.c:219
-msgid "Install/Update"
-msgstr "¸ÝáâÐÛÐæØøÐ/°ÖãàØàÐúÕ"
-
-#: ../../install_steps_interactive.pm_.c:219
-msgid "Is this an install or an update?"
-msgstr "´Ð ÛØ øÕ ÞÒÞ ØÝáâÐÛÐæØøÐ ØÛØ aÖãàØàÐúÕ ?"
-
-#: ../../install_steps_interactive.pm_.c:228
-msgid "Recommended"
-msgstr "¿àÕßÞàãçÕÝÞ"
-
-#: ../../install_steps_interactive.pm_.c:231
-#: ../../install_steps_interactive.pm_.c:234
-msgid "Expert"
-msgstr "µÚáßÕàâ"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Update"
-msgstr "°ÖãàØàÐúÕ"
-
-#: ../../install_steps_interactive.pm_.c:254 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "¸×ÐÑÕàØâe âØß ÜØèÐ"
-
-#: ../../install_steps_interactive.pm_.c:260 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "¿Þàâ ×Ð ÜØèÐ"
-
-#: ../../install_steps_interactive.pm_.c:261 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "¸×ÐÑÕàØâÕ ÝÐ ÚÞøØ áÕàØøáÚØ ßÞàâ øÕ ÒÐè ÜØè ßàØÚùãçÕÝ."
-
-#: ../../install_steps_interactive.pm_.c:269
-msgid "Buttons emulation"
-msgstr "µÜãÛÐæØjÐ âÐáâÕàa"
-
-#: ../../install_steps_interactive.pm_.c:271
-msgid "Button 2 Emulation"
-msgstr "µÜãÛÐæØjÐ 2 âÐáâÕàa"
-
-#: ../../install_steps_interactive.pm_.c:272
-msgid "Button 3 Emulation"
-msgstr "µÜãÛÐæØÙÐ 3 âÐáâÕàa"
-
-#: ../../install_steps_interactive.pm_.c:291
-msgid "Configuring PCMCIA cards..."
-msgstr "ºÞÝäØÓãàØèÕÜ PCMCIA ÚÐàâØæÕ..."
-
-#: ../../install_steps_interactive.pm_.c:291
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:296
-msgid "Configuring IDE"
-msgstr "KÞÝäØÓãàÐæØøÐ  IDE"
-
-#: ../../install_steps_interactive.pm_.c:296
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:311
-msgid "no available partitions"
-msgstr "ÝÕÜÐ ÔÞáâãßÝØå ßÐàâØæØøÐ"
-
-#: ../../install_steps_interactive.pm_.c:314
-msgid "Scanning partitions to find mount points"
-msgstr "ÁÚÕÝØàaúÕ ßÐàâØæØjÐ ×Ð ßàÞÝÐÛaÖeúÕ âaçÚÕ ÜÞÝâØàaúa"
-
-#: ../../install_steps_interactive.pm_.c:322
-msgid "Choose the mount points"
-msgstr "¸×ÐÑÕàØâÕ âÐçÚÕ ÜÞÝâØàÐúÐ"
-
-#: ../../install_steps_interactive.pm_.c:341
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"½Õ ÜÞÓã ßàÞçØâÐâØ âÐÑÕÛã ßÐàâØæØøÐ, ÜÝÞÓÞ øÕ ØáÚÒÐàÕÝÐ ×Ð ÜÕÝÕ :(\n"
-"¿ÞÚãèÐûã ÔÐùÕ ×ÐÞÑØÛÐ×ÕûØ ÛÞèÕ ßÐàâØæØøÕ¼ÞÓã ßÞÚãèÐâØ ÔÐ äÞàÜÐâØàÐÜ ÛÞèÕ "
-"ßÐàâØæØje (Á²¸ ¿¾´°Æ¸ ûÕ ÑØâØ Ø×ÓãÑùÕÝØ !).\n"
-"´àãÓÞ àeèeúÕ jÕ ÔÐ áÕ DrakX ÞÝÕÜÞÓãûØ ÔÐ ÜÞÔãäØÚãje âÐÑÕÛã ßÐàâØæØja.\n"
-"(ÓàeèÚÐ je %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:354
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ÝÕ ÜÞÖÕ ÔÐ ØáßàÐÒÝÞ ßàÞçØâÐ âÐÑÕÛã ßÐàâØæØøÐ.\n"
-"´ÐùØ ÝÐáâÐÒÐÚ ØÔÕ ÝÐ ÒÐè àØ×ØÚ !"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"½ÕÜÐ áÛÞÑÞÔÝÞÓ ßàÞáâÞàÐ ×Ð 1MB bootstrap! ¸ÝáâÐÛÐæØøÐ óÕ áÕ ÝÐáâÐÒØâØ, ÐÛØ "
-"ÔÐ ÑØ ßÞÔØÓÛØ ÒÐèáØáâÕÜ, ÜÞàÐóÕâÕ ÔÐ ÚàÕØàÐâÕ bootstrap ßÐàâØæØøã ã "
-"DiskDrake-ã"
-
-#: ../../install_steps_interactive.pm_.c:379
-msgid "No root partition found to perform an upgrade"
-msgstr "½ØøÕ root ßÐàâØæØøÕ ßÞâàÕÑÝÕ ×Ð ÐÖãàØàÐúÕ"
-
-#: ../../install_steps_interactive.pm_.c:380
-msgid "Root Partition"
-msgstr "Root ßÐàâØæØøÐ"
-
-#: ../../install_steps_interactive.pm_.c:381
-msgid "What is the root partition (/) of your system?"
-msgstr "½Ð ÚÞøÞø ßÐàâØæØøØ øÕ root ßÐàâØæØøÐ (/) ÒÐèÕÓ áØáâÕÜÐ?"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "ÂàÕÑÐ ÔÐ àÕáÕâãøÕâÕ ÜÐèØÝã ×Ð ßàØÜÕÝã Ø×ÜÕÝÐ ã âÐÑÕÛØ ßÐàâØæØøÐ"
-
-#: ../../install_steps_interactive.pm_.c:419
-msgid "Choose the partitions you want to format"
-msgstr "¸×ÐÑÕàØ ßÐàâØæØøÕ ×Ð äÞàÜÐâØàÐúÕ"
-
-#: ../../install_steps_interactive.pm_.c:420
-msgid "Check bad blocks?"
-msgstr "¿àÞÒÕàØ ÛÞèÕ ÑÛÞÚÞÒÕ ?"
-
-#: ../../install_steps_interactive.pm_.c:446
-msgid "Formatting partitions"
-msgstr "ÄÞàÜÐâØàÐúÕ ßÐàâØæØøã"
-
-#: ../../install_steps_interactive.pm_.c:448
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "ºàÕØàaúÕ Ø äÞàÜÐâØàaúÕ ÔÐâÞâÕÚe %s"
-
-#: ../../install_steps_interactive.pm_.c:451
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "½ÕÜÐ ÔÞÒÞùÝÞ swap-Ð ÔÐ ×ÐÒàèØ ØÝáâÐÛÐæØøã, ÔÞÔÐøâÕ øÞè swap-Ð"
-
-#: ../../install_steps_interactive.pm_.c:457
-msgid "Looking for available packages"
-msgstr "ÂàÐÖØÜ ßÐÚÕâÕ"
-
-#: ../../install_steps_interactive.pm_.c:463
-msgid "Finding packages to upgrade"
-msgstr "ÂàÐÖØÜ ßÐÚÕâÕ ×Ð ÐÖãàØàÐúÕ..."
-
-#: ../../install_steps_interactive.pm_.c:480
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "²aè áØáâÕÜ ÝÕÜÐ ÔÞÒÞùÝÞ ÜÕáâÐ ×Ð ØÝáâÐÛÐæØjã ØÛØ aÖãàØàaúe (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:499
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "ºÞÜßÛÕâÝa (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:499
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "¼ØÝØÜÐÛÝa (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:499
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "¿àÕßÞàãçÕÝÐ (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:505
-msgid "Custom"
-msgstr "¸×ÑÞà ßÞ ÖeùØ"
-
-#: ../../install_steps_interactive.pm_.c:552
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"¼ÞÛØÜ ²Ðá ÔÐ Ø×ÐÑÕàÕâÕ ãçØâÐÒÐúÕ ØÛØ áÝØÜÐúÕ áÕÛÕÚæØøÕ ßÐÚÕâÐ ÝÐ ÔØáÚÕâã.\n"
-"ÄÞàÜÐâ ÚÞøØ áÕ ÚÞàØáâØ øÕ ØáâØ ÚÐÞ Ø ÚÞÔ  auto_install ÓÕÝÕàØáÐÝØå ÔØáÚÕâÐ."
-
-#: ../../install_steps_interactive.pm_.c:555
-msgid "Load from floppy"
-msgstr "ÃçØâÐø áÐ ÔØáÚÕâÕ"
-
-#: ../../install_steps_interactive.pm_.c:557
-msgid "Loading from floppy"
-msgstr "ÃçØâÐÒÐÜ áÐ ÔØáÚÕâÕ"
-
-#: ../../install_steps_interactive.pm_.c:557
-msgid "Package selection"
-msgstr "¾ÔÐÑØà ßÐÚÕâÐ"
-
-#: ../../install_steps_interactive.pm_.c:562
-msgid "Insert a floppy containing package selection"
-msgstr "ÃÑÐæØâÕ ÔØáÚÕâã ÚÞøÐ áÐÔàÖØ áÕÛÕÚæØøã ßÐÚÕâÐ"
-
-#: ../../install_steps_interactive.pm_.c:574
-msgid "Save on floppy"
-msgstr "ÁÝØÜØ ÝÐ ÔØáÚÕâã"
-
-#: ../../install_steps_interactive.pm_.c:635
-msgid "Selected size is larger than available space"
-msgstr "ÁÕÛÕÚâÞÒÐÝÐ ÒÕÛØçØÝÐ øÕ ÒÕóÐ ÞÔ áÛÞÑÞÔÝÞÓ ßàÞáâÞàÐ"
-
-#: ../../install_steps_interactive.pm_.c:706
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"ÃÚÞÛØÚÞ ØÜaâÕ ÓÞàÕ ÝÐÒÕÔÕÝÕ CD-ÞÒe, ÚÛØÚÝØâÕ ÝÐ  Ok.\n"
-"ÃÚÞÛØÚÞ ÝÕÜÐâÕ ÝØjÕÔÐÝ CD, ÚÛØÚÝØâÕ ÝÐ  Cancel.\n"
-"°ÚÞ ÒÐÜ ÝÕÔÞáâÐjã  áÐÜÞ ÝÕÚØ CD-ÞÒØ , ÔÕáÕÛÕÚâãjâe Øx, Ð ÞÝÔÐ ÚÛØÚÝØâÕ ÝÐ Ok."
-
-#: ../../install_steps_interactive.pm_.c:711
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom Þ×ÝaçÕÝ ÚÐÞ \"%s"
-
-#: ../../install_steps_interactive.pm_.c:740
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"¸ÝáâÐÛØàÐÜ ßÐÚÕâÕ %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:786
-msgid "Post-install configuration"
-msgstr "¿ÞáâØÝáâÐÛÐæØÞÝÐ ÚÞÝäØÓãàÐæØøa"
-
-#: ../../install_steps_interactive.pm_.c:792
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "ÃÑÐæØâÕ Boot ÔØáÚÕâã ã ãàÕòÐø %s"
-
-#: ../../install_steps_interactive.pm_.c:798
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "ÃÑÐæØâÕ Update Modules ÔØáÚÕâã ã ãàÕòÐø %s"
-
-#: ../../install_steps_interactive.pm_.c:823
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"·ÑÞÓ àÐ×ÛØçØâØå ÞßèâØx ×ÐåâÕÒÐ ÚÞjØ áÕ ÞÔÝÞáÕ ÝÐ ÞÒÐj  áÞäâÒÕà  ÚÐÞ Ø "
-"Ø×ÛÞÖÕÝÞáâ\n"
-"ÜÝÞÓØÜ ×ÐÚÞÝÞÔÐÒáâÒØÜÐ,ÚãßÐæ Ø/ØÛØ ÚÞàØáÝØÚ áÞäâÒÕàÐ âàÕÑÐ\n"
-"ÔÐ ßàÞÒÕàØ ÔÐ ÛØ ×ÐÚÞÝ ÞÜÞÓãûÐÒÐ  download Ø ãßÞâàÕÑã áÞäâÒÕàÐ.\n"
-"\n"
-"ºãßæØ  Ø ÚÞàØáÝØæØ âàÕÑÐ ÔÐ ×ÝÐjã ÔÐ ÝÕ âàÕÑÐÔÐ Ø×ÒàÔÐÒÐjã\n"
-"×ÐÚÞÝ.ÃÚÞÛØÚÞ áÕ âÞ  ØßÐÚ ÔeáØ, ÞÝØ  ûÕ áÝÞáØâØ áÐÝÚæØje\n"
-"\n"
-"MandrakeSoft ÝØjÕ ÞÔÓÞÒÞàÐÝ ×Ð ÑØÛÞ ÚÐÚÒÕ ÓãÑØâÚÕ ØÛØ èâÕâÕÚÞjÕ ÜÞÓã ÝÐáâÐâØ,"
-"ÝØâØ ×Ð áãÔáÚÕ ÚÐ×ÝÕ ÚÞjÕ áÕ ÜÞÓã jÐÒØâØ.\n"
-"\n"
-"\n"
-"·Ð ÑØÛÞ ÚÐÚÒÐ ßØâaúÐ ÒÕ×ÐÝÐ ×Ð ÞÒã âÕÜã ÚÞÝâÐÚâØàÐjâe \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:855
-msgid "Choose a mirror from which to get the packages"
-msgstr "¸×ÐÑÕàØâÕ mirror áÐ ÚÞÓ ûÕâÕ áÚØÝãâØ ßÐÚÕâÕ"
-
-#: ../../install_steps_interactive.pm_.c:866
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "ºÐÝâÐÚâØàÐøâÕ mirror ×Ð ÛØáâã ÜÞÓãûØå ßÐÚÕâÐ"
-
-#: ../../install_steps_interactive.pm_.c:869
-msgid "Please choose the packages you want to install."
-msgstr "¸×ÐÑÕàØâÕ ßÐÚÕâÕ ×Ð ØÝáâÐÛÐæØøã"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "Which is your timezone?"
-msgstr "ºÞjÐ jÕ ÒaèÐ ÒàÕÜÕÝáÚÐ ×ÞÝa ?"
-
-#: ../../install_steps_interactive.pm_.c:886
-msgid "Hardware clock set to GMT"
-msgstr "²Ðè áØáâÕÜáÚØ (BIOS) çÐáÞÒÝØÚ øÕ ßÞÔÕèÕÝ ÝÐ GMT"
-
-#: ../../install_steps_interactive.pm_.c:887
-msgid "Automatic time synchronization (using NTP)"
-msgstr "°ãâÞÜÐâáÚÐ áØÝåàÞÝØ×ÐæØøÐ ÒàÕÜÕÝÐ (ßàÕÚÞ NTP-Ð)"
-
-#: ../../install_steps_interactive.pm_.c:894
-msgid "NTP Server"
-msgstr "NTP ÁÕàÒÕà"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:936 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "ÃÔÐùÕÝØ CUPS áÕàÒÕà"
-
-#: ../../install_steps_interactive.pm_.c:929
-msgid "No printer"
-msgstr "±Õ× èâÐÜßÐça"
-
-#: ../../install_steps_interactive.pm_.c:940 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "ÁaÖÕâÐÚ"
-
-#: ../../install_steps_interactive.pm_.c:943
-msgid "Mouse"
-msgstr "¼Øè"
-
-#: ../../install_steps_interactive.pm_.c:945
-msgid "Timezone"
-msgstr "²àÕÜÕÝáÚÐ ×ÞÝa"
-
-#: ../../install_steps_interactive.pm_.c:946 ../../printerdrake.pm_.c:1806
-#: ../../printerdrake.pm_.c:1877
-msgid "Printer"
-msgstr "ÈâÐÜßÐç"
-
-#: ../../install_steps_interactive.pm_.c:948
-msgid "ISDN card"
-msgstr "ISDN ÚÐàâØæa"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "Sound card"
-msgstr "·ÒãçÝÐ ÚÐàâØæa"
-
-#: ../../install_steps_interactive.pm_.c:954
-msgid "TV card"
-msgstr "TV ÚÐâØæa"
-
-#: ../../install_steps_interactive.pm_.c:990
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1018
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:991
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1027
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:992
-#: ../../install_steps_interactive.pm_.c:1014
-msgid "Local files"
-msgstr "»ÞÚÐÛÝÕ ÔÐâÞâÕÚÕ"
-
-#: ../../install_steps_interactive.pm_.c:1001
-#: ../../install_steps_interactive.pm_.c:1002 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "ÃÝÕáØ root ÛÞ×ØÝÚã"
-
-#: ../../install_steps_interactive.pm_.c:1003
-msgid "No password"
-msgstr "±Õ× ÛÞ×ØÝÚÕ"
-
-#: ../../install_steps_interactive.pm_.c:1008
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "¾ÒÐ ÛÞ×ØÝÚÐ jÕ áãÒØèe jÕÔÝÞáâÐÒÝa (âàÕÑÐ Ôa ØÜÐ ÑÐà %d ×ÝÐÚÞÒÐ)"
-
-#: ../../install_steps_interactive.pm_.c:1014 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:621
-msgid "Authentication"
-msgstr "°ãâÕÝâØäØÚÐæØøÐ"
-
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Authentication LDAP"
-msgstr "LDAP °ãâÕÝâØäØÚÐæØøÐ"
-
-#: ../../install_steps_interactive.pm_.c:1023
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1024
-msgid "LDAP Server"
-msgstr "LDAP ÁÕàÒÕà"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Authentication NIS"
-msgstr "NIS °ãâÕÝâØäØÚÐæØøÐ"
-
-#: ../../install_steps_interactive.pm_.c:1031
-msgid "NIS Domain"
-msgstr "NIS ´ÞÜÕÝ"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "NIS Server"
-msgstr "NIS ÁÕàÒÕà"
-
-#: ../../install_steps_interactive.pm_.c:1067
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"ÁâÐàâÝØ ÔØáÚ ÞÑÕ×ÑÕòãøÕ ÝÐçØÝ ßÞÔØ×ÐúÐ ÒÐèÕÓ »ØÝãÚá áØáâÕÜÐ ÑÕ× ×ÐÒØáÝÞáâØ\n"
-"ÞÔ ÝÞàÜÐÛÝÞÓ áâÐàâÕàa. ¾ÒÞ øÕ ÚÞàØáÝÞ ÐÚÞ ÝÕ ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ\n"
-"SILO(ØÛØ grub) ÝÐ ÒÐè áØáâÕÜ, ÐÚÞ ÔàãÓØ ÞßÕàÐâØÒÝØ áØáâÕÜ ãÚÛÞÝØ SILO, ØÛØ "
-"SILO ÝÕ\n"
-"àÐÔØ áÐ ÒÐèØÜ åÐàÔÒÕàÞÜ. ÁâÐàâÝØ ÔØáÚ ÜÞÖÕâÕ ÚÞàØáâØâØ áÐ Mandrake Linux\n"
-"'ÔØáÚÞÜ ×Ð áßÐáÐÒÐúÕ', èâÞ ÞÛÐÚèÐÒÐ ÞßÞàÐÒÐÚ ã áÛãçÐøã âÕÖÕ åÐÒÐàØøÕ.\n"
-"ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ÚàÕØàÐâÕ áâÐàâÝã ÔØáÚÕâã ×Ð ÒÐè áØáâÕÜãÑÐæØâÕ ÔØáÚÕâã ã "
-"ßÞÓÞÝ Ø ßàØâØáÝØâÕ \"´Ð\"."
-
-#: ../../install_steps_interactive.pm_.c:1083
-msgid "First floppy drive"
-msgstr "¿àÒØ äÛÞßØ/ÔØáÚÕâÝØ ãàeòÐj "
-
-#: ../../install_steps_interactive.pm_.c:1084
-msgid "Second floppy drive"
-msgstr "´àãÓØ äÛÞßØ/ÔØáÚÕâÝØ ãàeòÐj"
-
-#: ../../install_steps_interactive.pm_.c:1085 ../../printerdrake.pm_.c:1412
-msgid "Skip"
-msgstr "¿àÕáÚÞçØ"
-
-#: ../../install_steps_interactive.pm_.c:1090
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"ÁâÐàâÝØ ÔØáÚ ÞÑÕ×ÑÕòãøÕ ÝÐçØÝ ßÞÔØ×ÐúÐ ÒÐèÕÓ »ØÝãÚá áØáâÕÜÐ ÑÕ× ×ÐÒØáÝÞáâØ\n"
-"ÞÔ ÝÞàÜÐÛÝÞÓ áâÐàâÕàa. ¾ÒÞ øÕ ÚÞàØáÝÞ ÐÚÞ ÝÕ ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ\n"
-"LILO(ØÛØ grub) ÝÐ ÒÐè áØáâÕÜ, ÐÚÞ ÔàãÓØ ÞßÕàÐâØÒÝØ áØáâÕÜ ãÚÛÞÝØ LILO, ØÛØ "
-"LILO ÝÕ\n"
-"àÐÔØ áÐ ÒÐèØÜ åÐàÔÒÕàÞÜ. ÁâÐàâÝØ ÔØáÚ ÜÞÖÕâÕ ÚÞàØáâØâØ áÐ Mandrake Linux\n"
-"'ÔØáÚÞÜ ×Ð áßÐáÐÒÐúÕ', èâÞ ÞÛÐÚèÐÒÐ ÞßÞàÐÒÐÚ ã áÛãçÐøã âÕÖÕ åÐÒÐàØøÕ.\n"
-"´Ð ÛØ ÑØáâÕ ÔÐ ÚàÕØàÐâÕ áâÐàâÝã ÔØáÚÕâã ×Ð ÒÐè áØáâÕÜ?"
-
-#: ../../install_steps_interactive.pm_.c:1099
-msgid "Sorry, no floppy drive available"
-msgstr "ÂØ ÜÐÛÕàÐ, ÝÕÜÐ ÔØáÚÕâe"
-
-#: ../../install_steps_interactive.pm_.c:1103
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"¸×ÐÑàÕàØâÕ ÔØáÚÕâÝØ ãàÕòÐø ÚÞøØ ûÕâÕ ÚÞàØáâØâØ  ×Ð ÚàÕØàÐúÕ áâÐàÝÕ ÔØáÚÕâÕ"
-
-#: ../../install_steps_interactive.pm_.c:1107
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "ÃÑÐæØâÕ ßàÐ×Ýã ÔØáÚÕâã ã ãàÕòÐø %s"
-
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Creating bootdisk"
-msgstr "ºàÕØàÐÜ áâÐàâÝØ ÔØáÚ..."
-
-#: ../../install_steps_interactive.pm_.c:1117
-msgid "Preparing bootloader"
-msgstr "¿àØßàÕÜÐÜ áâÐàâÕà..."
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"¿ÞèâÞ Ø×ÓÛÕÔÐ ÔÐ ØÜÐâÕ áâÐàÞÜÞÔÝã ØÛØ ÝÕßÞ×ÝÐâã \n"
-" ÜÐèØÝã, yaboot áâÐàâÕà ÝÕóÕ àÐÔØâØ ÚÞÔ ÒÐá.\n"
-"¸ÝáâÐÛÐæØøÐ óÕ ÑØâØ ÝÐáâÐÒùÕÝÐ, ÐÛØ óÕâÕ ÜÞàÐâØ ÔÐ\n"
-" BootX ÔÐ ÑØ ßÞÔØÓÛØ áØáâÕÜ"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Do you want to use aboot?"
-msgstr "´Ð ÛØ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ aboot ?"
-
-#: ../../install_steps_interactive.pm_.c:1137
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"³àeèÚÐ ßàØ ØÝáâÐÛÐæØjØ aboot-a, \n"
-"´Ð ÛØ Ôa ßàÞÑÐÜ ÔÐ ØÝáâÐÛØàÐÜ çÐÚ ÐÚÞ âÞ ÒÞÔØ ãÝØèâeúã ßàÒÕ ßÐàâØæØje?"
-
-#: ../../install_steps_interactive.pm_.c:1144
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "¸ÝáâÐÛØàÐø áâÐàâÕà"
-
-#: ../../install_steps_interactive.pm_.c:1150
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "¸ÝáâÐÛÐæØøÐ áâÐàâÕàa ÝÕãáßÕÛÐ. ³àÕèÚÐ øÕ:"
-
-#: ../../install_steps_interactive.pm_.c:1158
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"¼ÞàaûÕâÕ ÔÐ ßàÞÜÕÝØâÕ Open Firmware boot-ãàeòÐj ÔÐ \n"
-" ÑØ ÜÞÓÛØ ÔÐ ÚÞàØáâØâÕ áâÐàâÕà.  ´àÖØâÕ Command-Option-O-F\n"
-" ßàØ áâÐàâaúã Ø ãÝÕáØâe:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" ¾ÝÔÐ ãÚãæÐjâe: shut-down\n"
-"ºÐÔÐ áÛÕÔeûØ ßãâ áâÐàâãjÕâÕ ÜaèØÝã âàÕÑÐÛØ ÑØ ÔÐ ÒØÔØâÕ áâÐâÕàÞÒ ßàÞÜßâ."
-
-#: ../../install_steps_interactive.pm_.c:1166 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "¼ÐÛÐ"
-
-#: ../../install_steps_interactive.pm_.c:1167 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "ÁàÕÔúÐ"
-
-#: ../../install_steps_interactive.pm_.c:1168 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "²ÕÛØÚÐ"
-
-#: ../../install_steps_interactive.pm_.c:1172 ../../standalone/draksec_.c:70
-msgid "Choose security level"
-msgstr "¸×ÐÑÕàØâÕ áØÓãàÝÞáÝØ ÝØÒÞ"
-
-#: ../../install_steps_interactive.pm_.c:1208
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "ÃÑÐæØâÕ ßàÐ×Ýã ÔØáÚÕâã ã ãàÕòÐø %s"
-
-#: ../../install_steps_interactive.pm_.c:1212
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "ºàÕØàÐÜ ÐãâÞ ØÝáâÐÛÐæØÞÝØ äÛÞßØ"
-
-#: ../../install_steps_interactive.pm_.c:1223
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"½ÕÚØ ÚÞàÐæØ ÝØáã ÚÞÜßÛÕâØàÐÝØ.\n"
-"\n"
-"´Ð ÛØ áâÒÐàÝÞ ÖÕÛØâÕ ÔÐ ×ÐÒàèØâÕ ?"
-
-#: ../../install_steps_interactive.pm_.c:1234
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"ÇÕáâØâÐÜÞ, ØÝáâÐÛÐæØøÐ øÕ ×ÐÒàèÕÝÐ.\n"
-"¸×ÒÐÔØâÕ ÔØáÚÕâã Ø× ÔàÐøÒÐ Ø ßàØâØáÝØâÕ <Enter> ÔÐ áÕ àÐçãÝÐà àÕáÕâãøÕ.\n"
-"\n"
-"·Ð ØÝäÞàÜÐæØøÕ Þ ßÞßàÐÒÚÐÜÐ ÚÞøÕ áã ÝÐ àÐáßÞÛÐÓÐúã ×Ð ÞÒÞ Ø×ÔÐúÕ\n"
-"Mandrake Linux »ØÝãÚáÐ, ßàÞçØâÐøâÕ ÔÕÞ 'Errata' ÚÞøØ ÜÞÖÕâÕ ÝÐûØ ÝÐ\n"
-"http://www.mandrakelinux.com/.\n"
-"\n"
-"¸ÝäÞàÜÐæØøÕ Þ ÚÞÝäØÓãàØáÐúã ÒÐèÕÓ áØáâÕÜÐ ÜÞÖÕâÕ ÝÐûØ ã ßÞáâ-ØÝáâÐÛÐæØÞÝÞÜ\n"
-"ßÞÓÛÐÒùã ×ÒÐÝØçÝÞÓ Mandrake Linux '²ÞÔØçÐ ×Ð ÚÞàØáÝØÚÕ'."
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid "Generate auto install floppy"
-msgstr "ºàÕØàÐj ÐãâÞ ØÝáâÐÛÐæØÞÝã ÔØáÚÕâã"
-
-#: ../../install_steps_interactive.pm_.c:1248
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"°ãâÞ ØÝáâÐÛÐæØjÐ ÜÞÖÕ ÑØâØ ßÞâßãÝÞ ÐãâÞÜÐâØ×ÞÒÐÝÐ ãÚÞÛØÚÞ ÖÕÛØâe,\n"
-"ã âÞÜ áÛãçÐjã ßàÕã×eûÕ ÚÞÝâàÞÛã ÝÐÔ åÐàÔ-ÔØáÚÞÜ!!\n"
-"(ÞÒÞ áÕ ÞÔÝÞáØ ÝÐ ØÝáâÐÛÐæØjã ÝÐ ÔàãÓÞj ÜaèØÝØ).\n"
-"\n"
-"¼ÞÖÔÐ ÒÞÛØâÕ ÔÐ ßÞÝÞÒØâÕ ØÝáâÐÛÐæØjã.\n"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Automated"
-msgstr "°ãâÞÜÐâáÚØ"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Replay"
-msgstr "¿ÞÝaÒùaúe"
-
-#: ../../install_steps_interactive.pm_.c:1256
-msgid "Save packages selection"
-msgstr "ÁaçãÒÐj áÕÛÕÚæØjã ßÐÚÕâa"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux ¸ÝáâÐÛÐæØøÐ %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"<Tab>/<Alt-Tab> ÚàÕâ. Ø×ÜÕòã ÕÛÕÜÕÝÐâa | <Space> Ø×ÑÞà | <F12> áÛÕÔÕûØ ÕÚàÐÝ"
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "ÝÕÔÞáâÐjÕ kdesu"
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "¸×ÐÑÕàØâÕ ÐÚæØøã"
-
-#: ../../interactive.pm_.c:286
-msgid "Advanced"
-msgstr "½ÐßàÕÔÝÞ"
-
-#: ../../interactive.pm_.c:347
-msgid "Please wait"
-msgstr "ÁÐÜÞ ÜÞÜÕÝÐâ..."
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "¿àÞèØàØ áâÐÑÛÞ"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "ÁÚãßØ áâÐÑÛÞ"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "±ØàÐjâÕ: àÐÒÝÞ ØÛØ ÓàãßÝÞ áÞàâØàÐÝÞ"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "»Þè Ø×ÑÞà, ßàÞÑÐøâÕ ßÞÝÞÒÞ\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "²Ðè Ø×ÑÞà ? (ßÞ default-ã %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "²Ðè Ø×ÑÞà ? (ßÞ default-ã %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "¾ßæØje: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "´Ð ÛØ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ aboot ?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "²Ðè Ø×ÑÞà ? (ßÞ default-ã %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-msgid "=> There are many things to choose from ($ll).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:173
-msgid "Czech (QWERTZ)"
-msgstr "ÇÕèÚØ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:175
-msgid "German"
-msgstr "½ÕÜÐçÚØ"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "´ÒÞàÐÚ"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:182
-msgid "Spanish"
-msgstr "ÈßÐÝáÚØ"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:183
-msgid "Finnish"
-msgstr "ÄØÝáÚØ"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:184
-msgid "French"
-msgstr "ÄàÐÝæãáÚØ"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:209
-msgid "Norwegian"
-msgstr "½ÞàÒÕèÚØ"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "¿ÞùáÚØ"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:217
-msgid "Russian"
-msgstr "ÀãáÚØ"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:219
-msgid "Swedish"
-msgstr "ÈÒÕÔáÚØ"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:234
-msgid "UK keyboard"
-msgstr "UK âÐáâÐâãàa"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:235
-msgid "US keyboard"
-msgstr "US âÐáâÐâãàa"
-
-#: ../../keyboard.pm_.c:154
-msgid "Albanian"
-msgstr "°ÛÑÐÝáÚØ"
-
-#: ../../keyboard.pm_.c:155
-msgid "Armenian (old)"
-msgstr "¨ÕàÜÕÝáÚØ (áâÐàØ)"
-
-#: ../../keyboard.pm_.c:156
-msgid "Armenian (typewriter)"
-msgstr "¨ÕàÜÕÝáÚØ (typewriter)"
-
-#: ../../keyboard.pm_.c:157
-msgid "Armenian (phonetic)"
-msgstr "¨ÕàÜÕÝáÚØ (äÞÝÕâáÚØ)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Azerbaidjani (latin)"
-msgstr "°×ÕàÑejÔ×ÐÝ  (ÛÐâØÝØæÐ)"
-
-#: ../../keyboard.pm_.c:164
-msgid "Belgian"
-msgstr "±ÕÛÓØøáÚØ"
-
-#: ../../keyboard.pm_.c:165
-msgid "Bulgarian"
-msgstr "±ãÓÐàáÚØ"
-
-#: ../../keyboard.pm_.c:166
-msgid "Brazilian (ABNT-2)"
-msgstr "±àÐ×ØÛáÚØ (ABNT-2)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Belarusian"
-msgstr "±ÕÛÞàãáÚØ"
-
-#: ../../keyboard.pm_.c:168
-msgid "Swiss (German layout)"
-msgstr "ÈÒÐøæÐàáÚØ (½ÕÜÐçÚØ àÐáßÞàÕÔ)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Swiss (French layout)"
-msgstr "ÈÒÐøæÐàáÚØ (ÄàÐÝæãáÚØ  àÐáßÞàÕÔ)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Czech (QWERTY)"
-msgstr "ÇÕèÚØ (QWERTY)"
-
-#: ../../keyboard.pm_.c:176
-msgid "German (no dead keys)"
-msgstr "½ÕÜaçÚØ (ÑÕ× ÜàâÒØå âÐáâÕàÐ)"
-
-#: ../../keyboard.pm_.c:177
-msgid "Danish"
-msgstr "´ÐÝáÚØ"
-
-#: ../../keyboard.pm_.c:178
-msgid "Dvorak (US)"
-msgstr "´ÒÞàÐÚ (US)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Dvorak (Norwegian)"
-msgstr "´ÒÞàÐÚ (½ÞàÒÕèÚØ)"
-
-#: ../../keyboard.pm_.c:180
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "´ÒÞàÐÚ (US)"
-
-#: ../../keyboard.pm_.c:181
-msgid "Estonian"
-msgstr "µáâÞÝáÚØ"
-
-#: ../../keyboard.pm_.c:185
-msgid "Georgian (\"Russian\" layout)"
-msgstr "³àã×ØøáÚØ (\"ÀãáÚØ\" àÐáßÞàÕÔ)"
-
-#: ../../keyboard.pm_.c:186
-msgid "Georgian (\"Latin\" layout)"
-msgstr "³àã×ØøáÚØ (\"»ÐâØÝØçÝØ\" àÐßÞàÕÔ)"
-
-#: ../../keyboard.pm_.c:187
-msgid "Greek"
-msgstr "³àçÚØ"
-
-#: ../../keyboard.pm_.c:188
-msgid "Hungarian"
-msgstr "¼ÐòÐàáÚØ"
-
-#: ../../keyboard.pm_.c:189
-msgid "Croatian"
-msgstr "ÅàÒaâáÚØ"
-
-#: ../../keyboard.pm_.c:190
-msgid "Israeli"
-msgstr "¨ÕÒàÕøáÚØ"
-
-#: ../../keyboard.pm_.c:191
-msgid "Israeli (Phonetic)"
-msgstr "¨ÕÒàÕøáÚØ (ÄÞÝÕâáÚØ)"
-
-#: ../../keyboard.pm_.c:192
-msgid "Iranian"
-msgstr "¸àÐÝáÚØ"
-
-#: ../../keyboard.pm_.c:193
-msgid "Icelandic"
-msgstr "¸áÛÐÝÔáÚØ"
-
-#: ../../keyboard.pm_.c:194
-msgid "Italian"
-msgstr "¸âÐÛØøÐÝáÚØ"
-
-#: ../../keyboard.pm_.c:196
-msgid "Japanese 106 keys"
-msgstr "JÐßÐÝáÚØ 106 âÐáâÕàa"
-
-#: ../../keyboard.pm_.c:199
-msgid "Korean keyboard"
-msgstr "ºÞàÕjÐÝáÚÐ âÐáâÐâãàa"
-
-#: ../../keyboard.pm_.c:200
-msgid "Latin American"
-msgstr "»ÐâØÝÞ-°ÜÕàØçÚØ"
-
-#: ../../keyboard.pm_.c:201
-msgid "Lithuanian AZERTY (old)"
-msgstr "»ØâÒÐÝáÚØ AZERTY(áâÐàØ)"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (new)"
-msgstr "»ØâÒÐÝáÚØ AZERTY(ÝÞÒØ)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "»ØâÒÐÝáÚØ \"number row\"QWERTY"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "»ØâÒÐÝáÚØ \"äÞÝÕâáÚØ\" QWERTY"
-
-#: ../../keyboard.pm_.c:206
-#, fuzzy
-msgid "Latvian"
-msgstr "»ÞÚÐæØja"
-
-#: ../../keyboard.pm_.c:207
-msgid "Macedonian"
-msgstr "¼ÐÚÕÔÞÝáÚØ"
-
-#: ../../keyboard.pm_.c:208
-msgid "Dutch"
-msgstr "´ÐÝáÚØ"
-
-#: ../../keyboard.pm_.c:210
-msgid "Polish (qwerty layout)"
-msgstr "¿ÞùáÚØ (qwerty àÐáßÞàÕÔ)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Polish (qwertz layout)"
-msgstr "¿ÞùáÚØ (qwertz àÐáßÞàÕÔ)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Portuguese"
-msgstr "¿ÞàâãÓÐÛáÚØ"
-
-#: ../../keyboard.pm_.c:213
-msgid "Canadian (Quebec)"
-msgstr "ºÐÝÐÔáÚØ (ºÒÕÑÕÚ)"
-
-#: ../../keyboard.pm_.c:215
-msgid "Romanian (qwertz)"
-msgstr "ÀãÜãÝáÚØ (qwertz)"
-
-#: ../../keyboard.pm_.c:216
-msgid "Romanian (qwerty)"
-msgstr "ÀãÜãÝáÚØ (qwerty)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Russian (Yawerty)"
-msgstr "ÀãáÚØ (ÏÒÕàâê)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Slovenian"
-msgstr "ÁÛÞÒÕÝÐçÚØ"
-
-#: ../../keyboard.pm_.c:224
-msgid "Slovakian (QWERTZ)"
-msgstr "ÁÛÞÒÐçÚØ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:225
-msgid "Slovakian (QWERTY)"
-msgstr "ÁÛÞÒÐçÚØ (QWERTY)"
-
-#: ../../keyboard.pm_.c:227
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "°×ÕàÑejÔ×ÐÝáÚØ (ûØàØÛØæÐ)"
-
-#: ../../keyboard.pm_.c:228
-msgid "Thai keyboard"
-msgstr " Thai âÐáâÐâãàÐ"
-
-#: ../../keyboard.pm_.c:230
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr " Thai âÐáâÐâãàÐ"
-
-#: ../../keyboard.pm_.c:231
-msgid "Turkish (traditional \"F\" model)"
-msgstr "ÂãàáÚØ (âàÐÔØæØÞÝÐÛÝØ \"F\" ÜÞÔÕÛ)"
-
-#: ../../keyboard.pm_.c:232
-msgid "Turkish (modern \"Q\" model)"
-msgstr "ÂãàáÚØ (ÜÞÔÕàÝØ \"Q\" ÜÞÔÕÛ)"
-
-#: ../../keyboard.pm_.c:233
-msgid "Ukrainian"
-msgstr "ÃÚàÐøØÝáÚØ"
-
-#: ../../keyboard.pm_.c:236
-msgid "US keyboard (international)"
-msgstr "US âÐáâÐâãàÐ (ØÝâÕàÝÐæØÞÝÐÛÝÐ)"
-
-#: ../../keyboard.pm_.c:237
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "²ØjÕâÝÐÜáÚØ  \"number row\"QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "ÁàßáÚØ (ÛÐâØÝØçÝØ/ûØàØÛØçÝØ àÐáßÞàÕÔ)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "ºàãÖÝÞ ÜÞÝâØàaúÕ  %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "ÃÚÛÞÝØ ßàÒÞ ÛÞÓØçÚÕ ÒÞÛãÜÕÝe\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun ¼Øè"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "ÁâÐÝÔÐàÔÝØ"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "³ÕÝÕàØçÚØ PS2 ÜØè áÐ âÞçÚØûÕÜ"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 âÐáâÕà"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Generic"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "ÂÞçÚØû"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "áÕàØøáÚØ"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "³ÕÝÕàØçÚØ 2 âÐáâÕàÐ ÜØè"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "³ÕÝÕàØçÚØ 3 âÐáâÕàÐ ÜØè"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC áÕàØøÐ (áÕàØøáÚØ)"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM áÕàØøÐ"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mouse (áÕàØøáÚØ, áâÐàØ C7 âØß)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "bus ÜØè"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 âÐáâÕàa"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 âÐáâÕàa"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "ÝØøÕÔÐÝ"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "½ÕÜÐ ÜØèa"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "¼ÞÛØÜ ²Ðá ÔÐ âÕáâØàÐâÕ ÜØèÐ"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "´a ÑØ ÜÞÓÛØ ÔÐ ÐÚâØÒØàÐâÕ ÜØèÐ"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "ßÞÜÕàØâÕ âÞçÚØû !"
-
-#: ../../my_gtk.pm_.c:385
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:420
-msgid "Finish"
-msgstr "ºàÐj"
-
-#: ../../my_gtk.pm_.c:420
-msgid "Next ->"
-msgstr "ÁÛÕÔeûØ  ->"
-
-#: ../../my_gtk.pm_.c:421
-msgid "<- Previous"
-msgstr "<- ¿àÕâåÞÔÝØ"
-
-#: ../../my_gtk.pm_.c:721
-msgid "Is this correct?"
-msgstr "´Ð ÛØ øÕ ÞÒÞ ØáßàÐÒÝÞ ?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "ºÞÝÕÚâãj ÝÐ ØÝâÕàÝÕâ"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"½ÐjçeèûØ ÝaçØÝ ×Ð ÚÞÝÕÚæØjã áa adsl je pppoe.\n"
-"¼eòãâØÜ, ßÞáâÞjÕ ÚÞÝÕÚæØjÕ ÚÞjÕ ÚÞàØáâÕ pptp Ø ÝÕÚÕ ÚÞjÕ ÚÞàØáâe dhcp.\n"
-"ÃÚÞÛØÚÞ ÝÕ ×ÝÐâe ÚÞjÐ je, Ø×ÐÑÕàØâe 'ÚÞàØáâØ pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "ÚÞàØáâØ dhcpd"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "ÚÞàØáâØ pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "ÚÞàØáâØ pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "ºÞÓ dhcp ÚÛØjÕÝâÐ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâe ?¿ÞáâÐÒùÕÝØ jÕ dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"½ØjÕ ÔÕâÕÚâÞÒÐÝÐ ÝØjÕÔÝÐ ÜàeÖÝÐ ÚÐàâØæa.\n"
-"½Õ ÜÞÓã ÔÐ ßÞÔÕáØÜ ÞÒÐj âØß ÚÞÝÕÚæØje."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "¸×ÐÑÕàØâÕ ÜàeÖÝØ ØÝâÕàäejá"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"¸×ÐÑÕàØâÕ ÜàeÖÝØ ÐÔÐßâÕà ÚÞjØ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ ×Ð ÚÞÝÕÚæØjã ÝÐ ØÝâÕàÝÕâ"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "½ØøÕ ßàÞÝÐòÕÝÐ ÜàÕÖÝÐ ÚÐàâØæÐ"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "¿ÞÔÕèÐÒÐúÕ ÜàÕÖÕ"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"¼ÞÛØÜ ãÝÕáØâÕ  ØÜÕ åÞáâÐ ãÚÞØÚÞ ÓÐ ×ÝÐâe\n"
-"'½ÕÚØ DHCP áÕàÒÕàØ ×ÐåâÕÒÐjã ØÜÕ åÞáâÐ ÔÐ ÑØ àÐÔØÛØ.\n"
-"²aèÕ ØÜÕ åÞáâÐ âàÕÑÐ ÔÐ ÑãÔÕ ßãÝÞ ØÜÕ ÚÐÞ Ýßà.\n"
-"``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "¸ÜÕ åÞáâÐ:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "çÐàÞÑúÐÚ ×Ð ßÞÔÕèÐÒÐúÕ ÜàÕÖe"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "µÚáâÕàÝØ ISDN ÜÞÔÕÜ"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "¸ÝâÕàÝÐ  ISDN ÚÐàâØæa"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "ºÐÚÒÐ jÕ ÒàáâÐ ÒaèÕ ISDN ÚÕÝÕÚæØjÕ ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"ºÞøã ISDN ÚÞÝäØÓãàÐæØøã ÒØèÕ ßàÕäÕàØàÐâÕ?\n"
-"\n"
-"* ÁâÐàÐ ÚÞäØÓãàÐæøÐ ÚÞàØáâØ isdn4net. ¾ÝÐ áÐÔàÖØ ÜÞóÝÕ ÐÛÐâÚÕ, ÐÛØ øÕ\n"
-"  ßàÞÑÛÕÜÐâØçÝÐ ×Ð ßÞÔÕèÐÒÐúÕ ßÞÓÞâÞÒÞ ×Ð ßÞçÕâÝØÚÕ, Ø ÝØøÕ ãÞÑØçÐøÕÝÐ.\n"
-"\n"
-"* ½ÞÒÐ ÚÞÝäØÓãàÐæØøÐ øÕ øÕÔÝÞáâÐÒÝØøÐ ×Ð àÐ×ãÜÕâØ, áâÐÝÔÐàÔÝØøÐ,\n"
-"  ÐÛØ áÐ ÜÐúÕ ÞßæØøÐ Ø ÐÛÐâÐ.\n"
-"\n"
-"¼Ø ßàÕßÞàãçãøÕÜÞ ÛÐÚèã (øÕÔÝÞáâÐÒÝØøã) ÚÞÝäØÓãàÐæØøã.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "½ÞÒÐ ÚÞÝäØÓãàÐæØøÐ (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "ÁâÐàÐ ÚÞÝäØÓãàÐæØøÐ (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN ºÞÝäØÓãàÐæØøa"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"¸×ÐÑÕàØâÕ áÒÞÓ ßàÞÒÐjÔeàa.\n"
-" ÃÚÞÛØÚÞ ÝØjÕ ÝÐ ÛØáâØ, Ø×ÐÑÕàØâÕ Unlisted"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "ÁâÐàâÝØ(Boot) ßàÞâÞÚÞÛ"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "µÒàÞßÐ (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "¾áâÐâÐÚ áÒÕâa"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"¾áâÐâÐÚ áÒÕâÐ \n"
-" ÑÕ× ´-ÚÐÝÐÛÐ (×ÐÚãßùÕÝÕ ÛØÝØjÕ)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "ºÞøØ ßàÞâÞÚÞÛ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâe ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "ºaÚÒã Òàáâã ÚÐàâØæÕ ØÜÐâÕ?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "½Õ ×ÝÐÜ"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"ÃÚÞÛØÚÞ ØÜaâÕ ISA ÚÐàâØæã, ÒàÕÔÝÞáâØ ÝÐ áÛÕÔeûÕÜ ÕÚàÐÝã ÑØ âàÕÑÐÛÕ ÑØâØ "
-"ØáßàÐÒÝe.\n"
-"\n"
-"ÃÚÞÛØÚÞ ØÜaâe PCMCIA ÚÐàâØæã, ÜÞàÐâÕ ×ÝÐâØ  irq Ø  io ×Ð Òaèã ÚÐàâØæã.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "¿àÕÚØÝØ"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "½ÐáâÐÒØ"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "ºÞøÐ øÕ ÒÐèÐ ISDN ÚÐàâØæa ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"´ÕâÕÚâÞÒÐÝÐ je ISDN PCI ÚÐàâØæa, ÝÕßÞ×ÝÐâÞÓ âØßa. ¸×ÐÑÕàØâe jÕÔÝã PCI "
-"ÚÐàâØæã ÝÐ áÛÕÔeûÕÜ ÕÚàÐÝã."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "½ØjÕ ßàÞÝaòÕÝÐ ISDN PCI ÚÐàâØæÐ.¸×ÐÑÕàØâÕ jÕÔÝã ÝÐ áÛÕÔeûÕÜ ÕÚàÐÝã."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "¸×ÐÑÕàØâÕ áÕàØøáÚØ ßÞàâ  ÝÐ ÚÞøØ øÕ ÜÞÔÕÜ ßÞÒÕ×ÐÝ."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Dialup ÞßæØøÕ"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:617
-msgid "Connection name"
-msgstr "¸ÜÕ ÚÞÝÕÚæØøÕ"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:618
-msgid "Phone number"
-msgstr "±àÞø âÕÛÕäÞÝÐ"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:619
-msgid "Login ID"
-msgstr "ID ×Ð ÛÞÓÞÒÐúÕ"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:621
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:621
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:621
-msgid "Script-based"
-msgstr "±Ð×ØàÐÝÞ ÝÐ áÚàØßâØ"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:621
-msgid "Terminal-based"
-msgstr "±Ð×ØàÐÝÞ ÝÐ âÕàÜØÝÐÛã"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:622
-msgid "Domain name"
-msgstr "¸ÜÕ ÔÞÜÕÝÐ"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:623
-msgid "First DNS Server (optional)"
-msgstr "¿àÒØ DNS ÁÕàÒÕà (ÞßæØja)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:624
-msgid "Second DNS Server (optional)"
-msgstr "´àãÓØ DNS ÁÕàÒÕà (ÞßæØja)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"¼ÞÖÕâÕ áÕ ÔØáÚÞÝÕÚâÞÒÐâØ ØÛØ àÕÚÞÝäØÓãàØáÐâØ ÚÞÝÕÚæØjã."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"¿ÞÔÕáØ ØÝâÕàÝÕâ ÚÞÝäØÓãàÐæØjã"
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "ÂàÕÝãâÝÞ áâÕ ÚÞÝÕÚâÞÒÐÝØ ÝÐ ¸ÝâÕàÝÕâ"
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"ÁÐÔÐ áÕ ÜÞÖÕâÕ ÚÞÝÕÚâÞÒÐâØ ÝÐ ¸ÝâÕàÝÕâ ØÛØ àÕÚÞÝäØÓãàØáÐâØ ÚÞÝÕÚæØjã"
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "ÂàÕÝãâÝÞ ÝØáâÕ ÚÞÝÕÚâÞÒÐÝØ ÝÐ ¸ÝâÕàÝÕâ"
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "ºÞÝÕÚâãj ÝÐ ¸ÝâÕàÝÕâ"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "´ØáÚÞÝÕÚâãj áÐ ¸ÝâÕàÝÕâa"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "¿ÞÔÕáØ ÜàeÖÝã ÚÞÝäØÓãàÐæØjã(LAN ØÛØ ¸ÝâÕàÝÕâ)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "¸ÝâÕàÝÕâ ÚÞÝÕÚæØjÐ Ø  ÚÞÝäØÓãàÐæØja"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "ÁÐÔÐ âàÕÑÐ ÔÐ ßÞÔÕáØÜÞ %s ÚÞÝÕÚæØjã."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"ÁÐÔÐ âàÕÑÐ ÔÐ ßÞÔÕáØÜÞ %s ÚÞÝÕÚæØøã.\n"
-"\n"
-"\n"
-"¿àØâØáÝØâÕ \"à àÕÔã\" ×Ð ÝÐáâÐÒÐÚ."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "¿ÞÔÕèÐÒÐúÕ ÜàÕÖe"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"·ÑÞÓ âÞÓÐ èâÞ àÐÔØâÕ ÜàÕÖÝã ØÝáâÐÛÐæØjã, ÒaèÐ ÜàÕÖÐ jÕ Òeû ßÞÔeèÕÝa "
-"ßÞÔeèÕÝa.\n"
-"ºÛØÚÝØâÕ ÝÐ  Oº  ×ÐÔàÔÖÐÛØ ÚÞÝäØÓãàÐæØjã Network/Internet ÚÞÝÕÚæØje, ØÛØ "
-"cancel Ôa ÑØ ßÞÝÞÒÞ ãàÐÔØÛØ ÚÞäØÓãàÐæØjã.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"´ÞÑàÞÔÞèÛØ ã ßàÞÓàÐÜ ×Ð ¿ÞÔeèÐÒaúÕ ¼àeÖÝÕ ÚÞÝÕÚæØje\n"
-"\n"
-"ÁaÔÐ âàÕÑÐ ÔÐ ÚÞÝäØÓãàØèÕÜÞ Òaèã ØÝâÕàÝÕâ/ÜàeÖÝã ÚÞÝÕÚæØjã.\n"
-"ÃÚÞÛØÚÞ ÝÕ ÖÕÛØâÕ ÐãâÞ ÔÕâÕÚæØjã, ÔÕáÕÛÕÚâãjâÕ ÞßæØjã.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "¸×ÐÑÕàØâÕ ßàÞäØÛ ×Ð ÚÞÝäØÓãàØáaúe"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "ºÞàØáâØ ÐãâÞ ÔÕâÕÚæØjã"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "´ÕâÕÚâãjÕÜ  ãàeòÐje..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "½ÞàÜÐÛÝa ÜÞÔÕÜáÚa ÚÞÝÕÚæØja"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "´ÕâÕÚâÞÒÐÝÞ ÝÐ ßÞàâã %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN ÚÞÝÕÚæØja"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "ÔÕâÕÚâÞÒÐÝÞ %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ADSL ÚÞÝÕÚæØja"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "´ÕâÕÚâÞÒÐÝÞ ÝÐ ØÝâÕàäejáã %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "ºÐÑÛÞÒáÚÐ ÚÞÝÕÚæØja"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "´ÕâÕÚâÞÒÐÝÐ øÕ ÚÐÑÛÞÒáÚÐ ÚÞÝÕÚæØja "
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "LAN ÚÞÝÕÚæØja"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "ÔÕâÕÚâÞÒÐÝÐ ÜàeÖÝÐ ÚÐàâØæÐ(Õ)"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "¸×ÐÑÕàØâÕ âØß ÚÞÝÕÚæØøÕ ÚÞøØ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"²Ø áâÕ ßÞÔÕáØÛØ ÒØèÕ ÝÐçØÝÐ ×Ð ÚÞÝÕÚâÞÒÐúÕ ÝÐ ¸ÝâÕàÝÕâ.\n"
-"¸×ÐÑÕàØâÕ øÕÔÐÝ ÞÔ úØå ÚÞøØ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "¸ÝâÕàÝÕâ ÚÞÝÕÚæØjÐ"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "´Ð ÛØ ÖÕÛØâÕ ÔÐ áâÐàâãjÕâe ÚÞÝÕÚâÞÒaúÕ ßàØ áâÐàâaúã áØáâÕÜa ?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "¿ÞÔÕèÐÒÐúÕ ÜàÕÖe"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"¿ÞjÐÒØÞ áÕ ßàÞÑÛÕÜ âÞÚÞÜ àÕáâÐàâÞÒaúÐ ÜàeÖe?\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"çÕáâØâÐÜÞ, ÜàeÖÝÐ Ø ØÝâÕàÝÕâ ÚÞÝäØÓãàÐæØjÐ jÕ ×aÒàèÕÝa.\n"
-"\n"
-"ºÞÝäØÓãàÐæØjÐ áÕ áÐÔÐ ÜÞÖÕ ßàØÜÕÝØâØ ÝÐ áØáâÕÜ.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"ºÐÔÐ áÕ âÞ ãàÐÔØ, âàÕÑÐÛØ ÑØ ÔÐ àÕáâÐàâãjÕâe X\n"
-"ÞÚàãÖeúe ÔÐ ÑØ Ø×ÑÕÓÛØ ßàÞÑÛÕÜÕ áÐ ßàÞÜÕÝÞÜ hostname-a."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ÃßÞ×Þàeúe: ¾ÒÐj ãàÕòÐø jÕ Òeû ßàÕâåÞÔÝÞ ÚÞÝäØÓãàØáÐÝ ×Ð ÚÞÝÕÚâÞÒaúe Ýa "
-"¸ÝâÕàÝÕâ.\n"
-"ÁÐÜÞ ßàØåÒÐØâØâe ÔÐ ÑØ ßÞáâÐÒÚã ÞáâÐÒØÛØ ØáâÞÜ.\n"
-"¸×ÜÕÝÐ ßÞùÐ ÚÞjÕ ÒØÔØâÕ ûÕ ßÞÝØèâØâØ ßÞáâÞjeûã ÚÞÝäØÓãàÐæØjã."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"¼ÞÛØÜ ãÝÕáØâÕ IP ÚÞÝäØÓãàÐæØøã ×Ð ÞÒã ÜÐèØÝã.\n"
-"ÁÒÐÚÐ áâÐÒÚÐ âàÕÑÐ ÔÕ ÑãÔÕ tavka âàÕÑÐ ÔÐ ÑãÔÕ ãÝÕâÐ ÚÐÞ\n"
-"IP ÐÔàÕáÐ (ÝÐ ßàØÜÕà, 123.45.67.89)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "¿ÞÔÕèÐÒÐúÕ ÜàÕÖÝÞÓ ãàÕòÐøÐ %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr "(ÔàÐjÒÕà %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:258
-#: ../../standalone/draknet_.c:471
-msgid "IP address"
-msgstr "IP ÐÔàÕáÐ"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:472
-msgid "Netmask"
-msgstr "¼àÕÖÝÐ ÜÐáÚÐ"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "°ãâÞÜÐâáÚØ IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:422
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ÐÔàÕáÐ âàÕÑÐ ÔÐ ÑãÔÕ ã äÞàÜÐâã 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"¼ÞÛØÜ ãÝÕáØâÕ ØÜÕ ÒÐèÕÓ ÔÞÜÕÝÐ, ØÜÕ åÞáâÐ, ÚÐÞ IP ÐÔàÕáÕ ÔÞÔÐâÝØå\n"
-"'nameserver'-Ð. ¸ÜÕ ÒÐèÕÓ åÞáâÐ âàÕÑÐ ÔÐ ÑãÔÕ ßãÝÞ ÚÒÐÛØäØÚÞÒÐÝÞ ØÜÕ åÞáâÐ,\n"
-"ÚÐÞ ÝÐ ßà.  ``mybox.mylab.myco.com''.\n"
-"°ÚÞ ÝÕÜÐâÕ ÔÞÔÐâÝØå 'nameserver'-Ð, ÞáâÐÒØâÕ âÐ ßÞùÐ ßàÐ×ÝÐ."
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS áÕàÒÕà"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:616
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Gateway ãàÕòÐj"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "¿ÞÔeèÐÒaúÕ ßàÞÚáØja"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Proxy âàÕÑÐ ÔÐ ÑãÔÕ http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Proxy âàÕÑÐ ÔÐ ÑãÔÕ ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "ºÞÝäØÓãàÐæØøÐ ØÝâÕàÝÕâa"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "´Ð ÛØ åÞûÕâÕ ÔÐ áÕ ÚÞÝÕÚâãjÕâÕ ÝÐ ØÝâÕàÝÕâ áÐÔa?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:190
-#: ../../standalone/draknet_.c:196
-msgid "Testing your connection..."
-msgstr "ÂÕáâØàaúÕ ÚÞÝÕÚæØjÕ..."
-
-#: ../../network/tools.pm_.c:50 ../../standalone/draknet_.c:223
-msgid "The system is now connected to Internet."
-msgstr "ÁØáâÕÜ jÕ âàÕÝãâÝÞ ÚÞÝÕÚâÞÒÐÝ ÝÐ ¸ÝâÕàÝÕâ"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "¸× áØÓãàÝÞáÝØå àÐ×ÛÞÓÐ, ÞÝ ûÕ áÐÔÐ ÑØâØ ÔØáÚÞÝÕÚâÞÒÐÝ."
-
-#: ../../network/tools.pm_.c:52 ../../standalone/draknet_.c:223
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"¸×ÓÛÕÔÐ ÔÐ áØáâÕÜ ÝØjÕ ÚÞÝÕÚâÞÒÐÝ ÝÐ ¸ÝâÕàÝÕâ.\n"
-"¿àÞÑÐjâÕ ÔÐ ßàÞÜÕÝØâÕ ÚÞÝäØÓãàÐæØjã."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "ºÞÝäØÓãàÐæØøÐ ¸ÝâÕàÝÕâ ÚÞÝÕÚæØje"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "¼ÞÛØÜ ²°Á ÔÐ ßÞßãÝØâÕ ØÛØ Þ×ÝaçØâÕ ßÞùÐ ØáßÞÔ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:603
-msgid "Card IRQ"
-msgstr "IRQ ÚÐàâØæe"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:604
-msgid "Card mem (DMA)"
-msgstr "(DMA) ÚÐàâØæe"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:605
-msgid "Card IO"
-msgstr " IO ÚÐàâØæe"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:606
-msgid "Card IO_0"
-msgstr " IO_0 ÚÐàâØæe"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:607
-msgid "Card IO_1"
-msgstr "IO_1 ÚÐàâØæe"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:608
-msgid "Your personal phone number"
-msgstr "²aè ÛØçÝØ ÑàÞj âÕÛÕäÞÝa"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:609
-msgid "Provider name (ex provider.net)"
-msgstr "¸ÜÕ ßàÞÒÐjÔÕàÐ (Ýßà. provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:610
-msgid "Provider phone number"
-msgstr "±àÞø âÕÛÕäÞÝÐ ßàÞÒÐjÔÕàa"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:611
-msgid "Provider dns 1 (optional)"
-msgstr "¿àÞÒÐjÔÕàÞÒ dns 1 (ÞßæØÞÝÞ)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:612
-msgid "Provider dns 2 (optional)"
-msgstr "¿àÞÒÐjÔÕàÞÒ dns 2 (ÞßæØÞÝÞ)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "¸×ÐÑÕàØ âÐáâÐâãàã"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:615
-msgid "Dialing mode"
-msgstr "¼ÞÔ ×Ð ÑØàaúe"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:627
-msgid "Connection speed"
-msgstr "±à×ØÝÐ ÚÞÝÕÚæØøÕ "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:628
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "²àÕÜÕ ÚÞÝÕÚæØøÕ: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:613
-msgid "Account Login (user name)"
-msgstr "»ÞÓÞÒaúÕ ×Ð àaçãÝ (ÚÞàØáÝØçÚÞ ØÜÕ)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:614
-msgid "Account Password"
-msgstr "»Þ×ØÝÚÐ ×Ð àaçãÝ"
-
-#: ../../partition_table.pm_.c:642
-msgid "Extended partition not supported on this platform"
-msgstr "Extended ßÐàâØæØjÐ ÝØjÕ ßÞÔàÖÐÝÐ ÝÐ ÞÒÞj ßÛÐâäÞàÜØ"
-
-#: ../../partition_table.pm_.c:660
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"¸ÜÐâÕ ßàÐ×ÝØÝã ã ÒÐèÞø âÐÑÕÛØ ßÐàâØæØøÐ ÐÛØ øÕ ÝÕ ÜÞÓã ÚÞàØáØâØ.\n"
-"¨ÕÔØÝÞ àÕèÕúÕ øÕ ÔÐ ßÞÜÕàØâÕ ßàØÜÐàÝã ßÐàâØæØøã âÐÚÞ ÔÐ ßàÐ×ÝØÝÐ ÑãÔÕ\n"
-"ÔÞ extended ßÐàâØæØøÐ"
-
-#: ../../partition_table.pm_.c:748
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "¾âÒÐàÐúÕ Ø× ÔÐâÞâÕÚe %s ÝØøÕ ãáßÕÛÞ: %s"
-
-#: ../../partition_table.pm_.c:750
-msgid "Bad backup file"
-msgstr "»ÞèÕ backup-ÞÒÐÝa ÔÐâÞâÕÚa"
-
-#: ../../partition_table.pm_.c:772
-#, c-format
-msgid "Error writing to file %s"
-msgstr "³àÕèÚÐ ÚÞÔ ãÝÞáÐ ã ÔÐâÞâÕÚa %s"
-
-#: ../../partition_table_raw.pm_.c:185
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"½eèâÞ ÛÞèÕ áÕ ÔeèÐÒÐ áÐ ÒaèØÜ åÐàÔ ÔØáÚÞÜ. \n"
-"ÂÕáâ ØÝâÕÓàØâÕâÐ ßÞÔÐâÐÚÐ ÝØjÕ ßàÞèÐÞ. \n"
-"ÂÞ ×ÝaçØ ÔÐ áÒÕ èâÞ áÕ ÝÐÛÐ×Ø ÝÐ ÔØáÚã ûÕ ×ÐÒàèØâØ ÚÐÞ òãÑàe"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ÜÞàÐ ØÜÐâØ"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "ÒaÖÝÞ"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "ÒÕÞÜÐ ÛÕßÞ"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "ÛÕßÞ"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ÜÞÖÔa"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - ¾ßèâØ Unix-ÞÒ áØáâÕÜ ×Ð èâÐÜßÐúÕ"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR ½ÞÒÕ ³ÕÝÕàÐæØøÕ"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer ´ÕÜÞÝ"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - ÈâÐÜßÐø, ÝÕÜÞø ÔÐ ßÐÜâØè"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "»ÞÚÐÛÝØ  èâÐÜßÐç"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "ÃÔÐùÕÝØ èâÐÜßaç"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "ÃÔÐùÕÝØ CUPS áÕàÒÕà"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "ÃÔÐùÕÝØ lpd áÕàÒÕà"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "¼àeÖÝØ èâÐÜßÐç (socket)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "ÁÕàÒÕà èâÐÜßÐçÐ:"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "ÃàeòÐj ×Ð èâÐÜßÐç URI"
-
-#: ../../printer.pm_.c:48
-#, fuzzy
-msgid "Pipe job into a command"
-msgstr "ÃÑÐæØ ã ÚÞÜÐÝÔã"
-
-#: ../../printer.pm_.c:424 ../../printer.pm_.c:555 ../../printer.pm_.c:845
-#: ../../printerdrake.pm_.c:1257 ../../printerdrake.pm_.c:2056
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:552 ../../printerdrake.pm_.c:811
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:699
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(ÜÞÔãÛ %s)"
-
-#: ../../printer.pm_.c:701
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "¸×ÑÞà ßÞÒÕ×ÐÝÞáâØ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "ºÐÚÞ øÕ èâÐÜßÐç ßÞÒÕ×ÐÝ?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"ÁÐ ãÔaùÕÝØÜ CUPS áÕàÒÕàÞÜ, ÝÕ ÜÞàÐâÕ ÔÐ ÚÞäØÓãàØèÕâe\n"
-"ÞÒÔÕ ÝØ jÕÔÐÝ èâÐÜßaç; èâÐÜßaçØ ûÕ ÑØâØ ÐãâÞÜÐâáÚØ ÔÕâÕÚâÞÒÐÝØ.\n"
-"ÞáØÜ ÐÚÞ ØÜÐâÕ áÕàÒÕà ÝÐ ÔàãÓÞj ÜàeÖØ; ÐÚÞ jÕ âÞ\n"
-"áÛãçÐj, ÜÞàÐâÕ ÔÐâØ IP ÐÔàÕáã  CUPS áÕàÒÕàa\n"
-"Ð ÞßæØÞÝÞ Ø ÑàÞj ßÞàâa."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "½ØøÕÔÐÝ"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "¸×ÐÑÕàØâÕ default (ÞáÝÞÒÝÞÓ) ÚÞàØáÝØÚa:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1320
-#: ../../printerdrake.pm_.c:1324 ../../printerdrake.pm_.c:1325
-#: ../../printerdrake.pm_.c:1326 ../../printerdrake.pm_.c:2044
-msgid "Close"
-msgstr "·ÐâÒÞàØ"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "ÃÔÐùÕÝØ èâÐÜßaç"
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ÐÔàÕáÐ âàÕÑÐ ÔÐ ÑãÔÕ ã äÞàÜÐâã 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:557
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "±àÞj ßÞàâÐ ÑØ âàÕÑÐÞ ÔÐ ÑãÔÕ ÝãÜÕàØçÚØ ÑàÞj"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Default printer"
-msgstr "»ÞÚÐÛÝØ  èâÐÜßÐç"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "SMB áÕàÒÕà IP:"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:550
-msgid "Port"
-msgstr "¿Þàâ"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "KÞÝäØÓãàÐæØøa áâØÛÐ áâÐàâaúa"
-
-#: ../../printerdrake.pm_.c:217 ../../standalone/scannerdrake_.c:40
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "´ÕâÕÚâãjÕÜ  ãàeòÐje..."
-
-#: ../../printerdrake.pm_.c:217 ../../standalone/scannerdrake_.c:40
-msgid "Test ports"
-msgstr "ÂÕáâØàÐúÕ ßÞàâÞÒÐ"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "ÈâÐÜßÐç, ÜÞÔÕÛ \"%s\", øÕ ÔÕâÕÚâÞÒÐÝ ÝÐ "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "»ÞÚÐÛÝØ ãàÕòÐø ×Ð èâÐÜßÐç"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"½Ð ÚÞøØ ãàeòÐj øÕ ÒÐè èâÐÜßÐç ßÞÒÕ×ÐÝ \n"
-"(/dev/lp0 ÞÔÓÞÒÐàÐ LPT1: ã DOS-ã)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "ÃàeòÐj ×Ð èâÐÜßÐç:"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "½ÕÔÞáâÐøÕ ÃàÕüÐø/ØÜÕ ÔÐâÞâÕÚÕ!"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:714
-#: ../../printerdrake.pm_.c:807
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "ÃçØâÐÒÐÜ CUPS ÑÐ×ã ßÞÔÐâÐÚÐ Þ ÔàÐjÒÕàØÜa..."
-
-#: ../../printerdrake.pm_.c:328
-msgid "Remote lpd Printer Options"
-msgstr "¾ßæØøÕ ×Ð ãÔÐùÕÝØ lpd"
-
-#: ../../printerdrake.pm_.c:329
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"´Ð ÑØáâÕ ÜÞÓÛØ ÔÐ ÚÞàØáâØâÕ ãÔÐùÕÝØ àÕÔ ßÞáÛÞÒÐ\n"
-"×Ð èâÐÜßã ÜÞàÐâÕ ÝÐÒÕáâØ ØÜÕ åÞáâÐ ÝÐ ÚÞÜÕ øÕ áÕàÒÕà ×Ð èâÐÜßÐç\n"
-"Ø ØÜÕ àÕÔÐ ßÞáÛÞÒÐ ×Ð èâÐÜßã ÝÐ âÞÜ áÕàÒÕàã."
-
-#: ../../printerdrake.pm_.c:332
-#, fuzzy
-msgid "Remote host name"
-msgstr "¸ÜÕ ãÔÐùÕÝÞÓ host-a:"
-
-#: ../../printerdrake.pm_.c:333
-#, fuzzy
-msgid "Remote printer name"
-msgstr "ÃÔÐùÕÝØ èâÐÜßaç"
-
-#: ../../printerdrake.pm_.c:336
-msgid "Remote host name missing!"
-msgstr "½ÕÔÞáâÐøÕ ØÜÕ ãÔÐùÕÝÞÓ host-a!"
-
-#: ../../printerdrake.pm_.c:340
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "½ÕÔÞáâÐøÕ ØÜÕ ãÔÐùÕÝÞÓ host-a!"
-
-#: ../../printerdrake.pm_.c:408
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT)  ÞßæØøÕ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:409
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"´Ð ÑØáâÕ ÜÞÓÛØ ÔÐ èâÐÜßÐâÕ ÝÐ ÜàÕÖÝØ èâÐÜßÐç, âàÕÑÐ ÔÐ ÝÐÒÕÔÕâÕ\n"
-"ØÜÕ åÞáâÐ LAN ÜÕÝÐÔÖÕàÐ (ÚÞøÕ ÝØøÕ ãÒÕÚ ØáâÞ ÚÐÞ TCP/IP ØÜÕ ÜÐèØÝÕ);\n"
-"IP ÐÔàÕáã èâÐÜßÐçÕÒÞÓ áÕàÒÕàÐ; ÔÕùÕÝÞ ØÜÕ èâÐÜßÐçÐ ÚÞÜÕ ßàØáâãßÐâÕ,\n"
-"ÚÐÞ Ø ßÞâàÕÑÝÐ ÚÞàØáÝØçÚÐ ØÜÕÝÐ Ø ÛÞ×ØÝÚÕ."
-
-#: ../../printerdrake.pm_.c:414
-msgid "SMB server host"
-msgstr "SMB áÕàÒÕà  host:"
-
-#: ../../printerdrake.pm_.c:415
-msgid "SMB server IP"
-msgstr "SMB áÕàÒÕà IP:"
-
-#: ../../printerdrake.pm_.c:416
-msgid "Share name"
-msgstr "´ÕùÕÝÞ (×ÐjÕÔÝØçÚÞ)  ØÜe :"
-
-#: ../../printerdrake.pm_.c:419
-msgid "Workgroup"
-msgstr "ÀÐÔÝÐ ÓàãßÐ(Workgroup):"
-
-#: ../../printerdrake.pm_.c:426
-msgid "Either the server name or the server's IP must be given!"
-msgstr "¼ÞàÐâÕ ÔÐâØ ØÛØ ØÜÕ áÕàÒÕàÐ ØÛØ úÕÓÞÒ IP!"
-
-#: ../../printerdrake.pm_.c:430
-msgid "Samba share name missing!"
-msgstr "½ÕÔÞáâÐøÕ ÔÕùÕÝÞ ØÜÕ ×Ð Samba-ã!"
-
-#: ../../printerdrake.pm_.c:489
-msgid "NetWare Printer Options"
-msgstr "NetWare ÞßæØøÕ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:490
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"´Ð ÑØáâÕ ÜÞÓÛØ ÔÐ èâÐÜßÐâÕ ÝÐ NetWare èâÐÜßÐç, âàÕÑÐ ÔÐ ÝÐÒÕÔÕâÕ\n"
-"ØÜÕ  NetWare áÕàÒÕàÐ ×Ð èâÐÜßÐç (ÚÞøÕ ÝØøÕ ãÒÕÚ ØáâÞ ÚÐÞ TCP/IPhostname! );\n"
-"âÕ  ØÜÕ 'àÕÔÐ' èâÐÜßÐçÐ ÚÞÜÕ ßàØáâãßÐâÕ,\n"
-"ÚÐÞ Ø ßÞâàÕÑÝÐ ÚÞàØáÝØçÚÐ ØÜÕÝÐ Ø ÛÞ×ØÝÚÕ."
-
-#: ../../printerdrake.pm_.c:494
-msgid "Printer Server"
-msgstr "ÁÕàÒÕà èâÐÜßÐçÐ:"
-
-#: ../../printerdrake.pm_.c:495
-msgid "Print Queue Name"
-msgstr "Print Queue ØÜÕ:"
-
-#: ../../printerdrake.pm_.c:500
-msgid "NCP server name missing!"
-msgstr "½ÕÔÞáâÐøÕ ØÜÕ NCP áÕàÒÕàÐ!"
-
-#: ../../printerdrake.pm_.c:504
-msgid "NCP queue name missing!"
-msgstr "½ÕÔÞáâÐøÕ ØÜÕ ×Ð NCP àÕÔ!"
-
-#: ../../printerdrake.pm_.c:543
-msgid "Socket Printer Options"
-msgstr "¾ßæØøÕ ßàÚùãçÝÞÓ  èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:544
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"´Ð ÑØ èâÐÜßÐÛØ ÝÐ ßàÚùãçÝÞÜ èâÐÜßÐçã, ÜÞàÐâÕ ÞÑÕ×ÑÕÔØâØ\n"
-"ØÜÕ åÞáâÐ ×Ð èâÐÜßÐç Ø ÕÒÕÝâãÐÛÝÞ ÑàÞj ßÞàâa."
-
-#: ../../printerdrake.pm_.c:549
-#, fuzzy
-msgid "Printer host name"
-msgstr "¸ÜÕ åÞáâÐ ×Ð èâÐÜßÐç"
-
-#: ../../printerdrake.pm_.c:553
-msgid "Printer host name missing!"
-msgstr "½ÕÔÞáâÐøÕ ØÜÕ åÞáâÐ!"
-
-#: ../../printerdrake.pm_.c:582 ../../printerdrake.pm_.c:584
-msgid "Printer Device URI"
-msgstr "ÃàeòÐj ×Ð èâÐÜßÐç URI"
-
-#: ../../printerdrake.pm_.c:583
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"¼ÞÖÕâÕ ÔØàÕÚâÝÞ ÞÔàÕÔØâØ URI ×Ð ßàØáâãß èâÐÜßÐçã. URI ÜÞàÐ ØáßãúÐÒÐâØ ØÛØ "
-"CUPS ØÛØ Foomatic áßÕæØäØÚÐæØøÕ. ·ÐßÐÜâØâÕ ÔÐ ÝØáã áÒØ URI âØßÞÒØ ßÞÔàÖÐÝØ."
-
-#: ../../printerdrake.pm_.c:598
-msgid "A valid URI must be entered!"
-msgstr "¼ÞàÐâÕ ãÝÕâØ ÒÐÛØÔÐÝ URI!"
-
-#: ../../printerdrake.pm_.c:698
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"ÁÒÐÚØ èâÐÜßÐç ÜÞàÐ ÔÐ ØÜÐ ØÜÕ (ÝÐ ßàØÜÕà lp).\n"
-"¿ÞùÐ ×Ð ¾ßØá Ø »ÞÚÐæØøã ÝÕ ÜÞàÐøã ÑØâØ \n"
-"ßÞßãúÕÝÐ. ÂÞ áã áÐÜÞ ÚÞàØáÝÕ ÝÐßÞÜÕÝÕ ×Ð ÚÞàØáÝØÚÕ."
-
-#: ../../printerdrake.pm_.c:701
-msgid "Name of printer"
-msgstr "¸ÜÕ èâÐÜßÐça"
-
-#: ../../printerdrake.pm_.c:702
-msgid "Description"
-msgstr "¾ßØá"
-
-#: ../../printerdrake.pm_.c:703
-msgid "Location"
-msgstr "»ÞÚÐæØja"
-
-#: ../../printerdrake.pm_.c:717
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "ÃçØâÐÒÐÜ CUPS ÑÐ×ã ßÞÔÐâÐÚÐ Þ ÔàÐjÒÕàØÜa..."
-
-#: ../../printerdrake.pm_.c:814
-msgid "Printer model selection"
-msgstr "ÁÕÛÕÚæØøÐ ÜÞÔÕÛÐ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:815
-msgid "Which printer model do you have?"
-msgstr "ºÞøã ÜÞÔÕÛ èâÐÜßÐçÐ ØÜÐâÕ?"
-
-#: ../../printerdrake.pm_.c:816
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the \n"
-"auto-detection of your printer model\n"
-"correctly. Search the correct model in the\n"
-"list when the cursor is standing on a \n"
-"wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:896
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "ºÞÝäØÓãàÐæØøÐ ØÝâÕàÝÕâa"
-
-#: ../../printerdrake.pm_.c:897
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:946 ../../printerdrake.pm_.c:976
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "ºÞÝäØÓãàÐæØøÐ ØÝâÕàÝÕâa"
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:977
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1109
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1120
-#, fuzzy, c-format
-msgid "Option %s must be an integer number!"
-msgstr "¿Þàâ ÜÞàÐ ÑØâØ ÑàÞøÝÐ Þ×ÝÐÚÐ!"
-
-#: ../../printerdrake.pm_.c:1124
-#, fuzzy, c-format
-msgid "Option %s must be a number!"
-msgstr "¿Þàâ ÜÞàÐ ÑØâØ ÑàÞøÝÐ Þ×ÝÐÚÐ!"
-
-#: ../../printerdrake.pm_.c:1129
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1166
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "´Ð ÛØ ÖÕÛØâÕ ÔÐ ØèâÐÜßÐâÕ âÕáâ áâàÐÝØæã?"
-
-#: ../../printerdrake.pm_.c:1182
-#, fuzzy
-msgid "Test pages"
-msgstr "ÂÕáâØàÐúÕ ßÞàâÞÒÐ"
-
-#: ../../printerdrake.pm_.c:1183
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1188
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1189
-#, fuzzy
-msgid "Print"
-msgstr "ÈâÐÜßÐç"
-
-#: ../../printerdrake.pm_.c:1191
-#, fuzzy
-msgid "Standard test page"
-msgstr "ÁâÐÝÔÐàÔÝØ"
-
-#: ../../printerdrake.pm_.c:1194
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1197
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "ÈâÐÜßÐÜ âÕáâ áâàÐÝ(ØæÕ)ã..."
-
-#: ../../printerdrake.pm_.c:1199
-#, fuzzy
-msgid "Photo test page"
-msgstr "ÈâÐÜßÐÜ âÕáâ áâàÐÝ(ØæÕ)ã..."
-
-#: ../../printerdrake.pm_.c:1205 ../../printerdrake.pm_.c:1327
-msgid "Printing test page(s)..."
-msgstr "ÈâÐÜßÐÜ âÕáâ áâàÐÝ(ØæÕ)ã..."
-
-#: ../../printerdrake.pm_.c:1230
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"ÂÕáâ áâàÐÝ(ØæÕ)Ð øÕ ßÞáÛÐÝÐ èâÐÜßÐç ÔÕÜÞÝã.\n"
-"ÂÞ ÜÞÖÕ ÔÞÒÕáâØ ÔÞ ÜÐÛÞÓ ÞÔÛÐÓÐúÐ áâÐàâÐ èâÐÜßÐçÐ.\n"
-"ÁâÐâãá èâÐÜßÐçÐ:\n"
-"%s\n"
-"\n"
-"´Ð ÛØ àÐÔØ OK ?"
-
-#: ../../printerdrake.pm_.c:1234
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"ÂÕáâ áâàÐÝ(ØæÕ)Ð øÕ ßÞáÛÐÝÐ èâÐÜßÐç ÔÕÜÞÝã.\n"
-"ÂÞ ÜÞÖÕ ÔÞÒÕáâØ ÔÞ ÜÐÛÞÓ ÞÔÛÐÓÐúÐ áâÐàâÐ èâÐÜßÐçÐ.\n"
-"´Ð ÛØ àÐÔØ OK ?"
-
-#: ../../printerdrake.pm_.c:1241
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1259 ../../printerdrake.pm_.c:2058
-#, fuzzy
-msgid "Raw printer"
-msgstr "±Õ× èâÐÜßÐça"
-
-#: ../../printerdrake.pm_.c:1267
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1269
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1272 ../../printerdrake.pm_.c:1284
-#: ../../printerdrake.pm_.c:1296
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1274 ../../printerdrake.pm_.c:1314
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1279 ../../printerdrake.pm_.c:1291
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281 ../../printerdrake.pm_.c:1293
-#: ../../printerdrake.pm_.c:1305
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1286 ../../printerdrake.pm_.c:1298
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1303
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1307
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1311
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1322
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "¾ÔáâãßÐÜ ÞÔ ÜàÕÖe"
-
-#: ../../printerdrake.pm_.c:1324
-#, fuzzy
-msgid "Print option list"
-msgstr "¾ßæØøÕ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:1348 ../../printerdrake.pm_.c:1774
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1368 ../../printerdrake.pm_.c:1406
-#: ../../printerdrake.pm_.c:1441
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "ºÞÝäØÓãàÐæØøÐ ØÝâÕàÝÕâa"
-
-#: ../../printerdrake.pm_.c:1369
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1380
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1383
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1387
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1390
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1393
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1394 ../../printerdrake.pm_.c:1411
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1407
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1415
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "¸ÜÕ èâÐÜßaçÐ âàÕÑÐ ÔÐ áÐÔàÖØ áÐÜÞ áÛÞÒa, ÑàÞjÕÒÕ Ø underscore"
-
-#: ../../printerdrake.pm_.c:1420
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1428
-#, fuzzy
-msgid "New printer name"
-msgstr "±Õ× èâÐÜßÐça"
-
-#: ../../printerdrake.pm_.c:1431
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1442
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1453
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "ÃçØâÐÒÐÜ CUPS ÑÐ×ã ßÞÔÐâÐÚÐ Þ ÔàÐjÒÕàØÜa..."
-
-#: ../../printerdrake.pm_.c:1461 ../../printerdrake.pm_.c:1524
-#: ../../printerdrake.pm_.c:1545
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "¿ÞÔÕèÐÒÐúÕ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:1462
-#, fuzzy
-msgid "Starting network ..."
-msgstr "ÁâÐàâãøÕÜ ÚÞÝÕÚæØjã..."
-
-#: ../../printerdrake.pm_.c:1484 ../../printerdrake.pm_.c:1492
-#: ../../printerdrake.pm_.c:1494
-#, fuzzy
-msgid "Configure the network now"
-msgstr "¿ÞÔÕáØ ÜàÕÖã"
-
-#: ../../printerdrake.pm_.c:1485
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "¼ÞÝØâÞà ÝØøÕ ÚÞÝäØÓãàØáÐÝ"
-
-#: ../../printerdrake.pm_.c:1486
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1493
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "¿ÞÔÕèÐÒÐúÕ ÜàÕÖÕ"
-
-#: ../../printerdrake.pm_.c:1526
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1533
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1546
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "ºÞøØ áØáâÕÜ ×Ð èâÐÜßaúÕ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâe ?"
-
-#: ../../printerdrake.pm_.c:1578
-#, fuzzy
-msgid "high"
-msgstr "²ÕÛØÚÐ"
-
-#: ../../printerdrake.pm_.c:1578
-#, fuzzy
-msgid "paranoid"
-msgstr "¿ÐàÐÝÞØÔÝÐ"
-
-#: ../../printerdrake.pm_.c:1579
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1580
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1614
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "ºÞøØ áØáâÕÜ ×Ð èâÐÜßaúÕ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâe ?"
-
-#: ../../printerdrake.pm_.c:1615
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1642 ../../printerdrake.pm_.c:1674
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1731
-#: ../../printerdrake.pm_.c:1811
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1678
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1705
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1760
-msgid "Select Printer Spooler"
-msgstr "¸×ÐÑÕàØâÕ Spooler ×Ð èâÐÜßÐç"
-
-#: ../../printerdrake.pm_.c:1761
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "ºÞøØ áØáâÕÜ ×Ð èâÐÜßaúÕ (spooler) ÖÕÛØâÕ ÔÐ ÚÞàØáâØâe ?"
-
-#: ../../printerdrake.pm_.c:1792
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "¿ÞÔÕáØ èâÐÜßÐç"
-
-#: ../../printerdrake.pm_.c:1839 ../../printerdrake.pm_.c:1871
-#: ../../printerdrake.pm_.c:2059 ../../printerdrake.pm_.c:2121
-msgid "Printer options"
-msgstr "¾ßæØøÕ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:1848
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-msgid "Would you like to configure printing?"
-msgstr "´Ð ÛØ ÑØáâÕ ÔÐ ßÞÔÕáØâÕ èâÐÜßÐç?"
-
-#: ../../printerdrake.pm_.c:1890
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1912
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1918 ../../standalone/draknet_.c:304
-msgid "Normal Mode"
-msgstr "½ÞàÜÐÛÝØ ¼ÞÔ"
-
-#: ../../printerdrake.pm_.c:1924 ../../printerdrake.pm_.c:2043
-msgid " (Default)"
-msgstr " (¿ÞÔàÐ×ãÜÕÒÐÝÞ)"
-
-#: ../../printerdrake.pm_.c:1928 ../../printerdrake.pm_.c:1968
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "ÃÔÐùÕÝØ CUPS áÕàÒÕà"
-
-#: ../../printerdrake.pm_.c:1929 ../../printerdrake.pm_.c:1969
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "ÃÔÐùÕÝØ CUPS áÕàÒÕà"
-
-#: ../../printerdrake.pm_.c:1931 ../../printerdrake.pm_.c:1952
-#: ../../printerdrake.pm_.c:1955 ../../printerdrake.pm_.c:2004
-msgid "Add printer"
-msgstr "´ÞÔÐøâÕ èâÐÜßÐç"
-
-#: ../../printerdrake.pm_.c:2010 ../../printerdrake.pm_.c:2026
-#: ../../printerdrake.pm_.c:2161
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "´Ð ÛØ åÞûÕâÕ ÔÐ âÕáâØàÐâÕ ÚÞÝäØÓãàÐæØøã?"
-
-#: ../../printerdrake.pm_.c:2036
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "ºÞÝäØÓãàÐæØøÐ ØÝâÕàÝÕâa"
-
-#: ../../printerdrake.pm_.c:2037
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2045
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2048 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Printer connection type"
-msgstr "¸ÝâÕàÝÕâ ÚÞÝÕÚæØjÐ"
-
-#: ../../printerdrake.pm_.c:2049 ../../printerdrake.pm_.c:2099
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "ÁÕÛÕÚæØøÐ ÜÞÔÕÛÐ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:2051 ../../printerdrake.pm_.c:2114
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2052 ../../printerdrake.pm_.c:2115
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2061 ../../printerdrake.pm_.c:2125
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2062 ../../printerdrake.pm_.c:2130
-#, fuzzy
-msgid "Print test pages"
-msgstr "ÈâÐÜßÐÜ âÕáâ áâàÐÝ(ØæÕ)ã..."
-
-#: ../../printerdrake.pm_.c:2063 ../../printerdrake.pm_.c:2132
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2064 ../../printerdrake.pm_.c:2134
-#, fuzzy
-msgid "Remove printer"
-msgstr "ÃÔÐùÕÝØ èâÐÜßaç"
-
-#: ../../printerdrake.pm_.c:2104
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "ÃÔÐùÕÝØ èâÐÜßaç"
-
-#: ../../printerdrake.pm_.c:2129
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2136
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "´Ð ÛØ åÞûÕâÕ ÔÐ àÕáâÐàâãjeâÕ ÜàÕÖe?"
-
-#: ../../printerdrake.pm_.c:2138
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "ÃÔÐùÕÝØ èâÐÜßaç"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "¿ÞÔeèÐÒaúÕ ßàÞÚáØja"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"´ÞÑàÞÔÞèÛØ ã ÐÛÐâ ×Ð ÚÞÝäØÓãàÐæØøã proxy-øÐ.\n"
-"\n"
-"¾ÒÔÕ ÜÞÖÕâÕ ÔÐ ßÞÔÕáØâÕ ÒÐèÕ http Ø ftp ßàÞÚáØøÕ\n"
-"áÐ ØÛØ ÑÕ× ÚÞàØáÝØçÚÞÓ ØÜÕÝÐ Ø ÛÞ×ØÝÚÕ\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"¼ÞÛØÜ ²Ðá ÔÐ ãÝÕáÕâÕ http proxy ØÝäÞàÜÐæØøÕ\n"
-"¾áâÐÒØâÕ ßÞùÐ ßàÐ×ÝØÜÐ ãÚÞÛØÚÞ ÝÕ ÖÕÛØâÕ ÔÐ ÚÞàØáâÕâØâÕ ßàÞÚáØ"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "¿Þàâ"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url âàÕÑÐ ÔÐ ßÞçØúÕ áÐ http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "±àÞj ßÞàâÐ ÑØ âàÕÑÐÞ ÔÐ ÑãÔÕ ÝãÜÕàØçÚÐ Þ×ÝÐÚÐ (ÑàÞø)"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"¼ÞÛØÜ ²Ðá ÔÐ ãÝÕáÕâÕ ØÝäÞàÜÐæØøÕ Þ ftp proxy-øã\n"
-"¿ÞùÐ ÞáâÐÒØâÕ ßàÐ×ÝØÜÐ ãÚÞÛØÚÞ ÝÕ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ ftp ßàÞÚáØ"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url âàÕÑÐ ÔÐ ßÞçØúÕ áÐ 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"ÃÝÕáØâÕ proxy ÚÞàØáÝØçÚÞ ØÜÕ Ø ÛÞ×ØÝÚã, ãÚÞÛØÚÞ ßÞáâÞøÕ.\n"
-"¿ÞùÐ ÞáâÐÒØâÕ ßÐ×ÝØÜÐ ãÚÞÛØÚÞ ÝÕ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ ÚÞàØáÝØçÚÞ ØÜÕ/ÛÞ×ØÝÚã"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "ÛÞÓÞÒaúe"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "ÛÞ×ØÝÚÐ"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "ßÞÜÞÒÞ ãÝÕáØâÕ ÛÞ×ØÝÚÕ"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "½ÕßÞÔãÔÐàÝÞáâ ÛÞ×ØÝÚØ. ¿àÞÑÐøâÕ ßÞÝÞÒÞ!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "½ØøÕ ÜÞÓãûÕ ÔÞÔÐâØ ßÐàâØæØøã ÝÐ _äÞàÜÐâØàÐÝ_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "½ØøÕ ÜÞÓãû ãÝÞá ã äÐøÛ %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ÝÕãáßÕÛÞ"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ÝÕãáßÕÛÞ (ÜÞÖÔÐ ÝÕÔÞáâÐjÕ raidtools ?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "½ÕÜÐ ÔÞÒÞùÝÞ ßÐàâØæØøÐ ×Ð RAID ÝØÒÞ %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ÁâÐàâÐÜ ALSA (Advanced Linux Sound Architecture) áØáâÕÜ ×Ð ×ÒãÚ"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron -  ßÞÔÕáØâÕ ßÕàØÞÔ.ÚÞÜÐÝÔe"
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd áÕ ÚÞàØáâØ ×Ð ßàaûeúÕ áâÐâãáÐ ÑÐâÕàØje Ø ÛÞÓÞÒaúÕ ßàÕÚÞ syslog.\n"
-"ºÞàØáâØ áÕ Ø ×Ð ÓaèeúÕ ÜaèØÝÕ (àÐÔØ Ø ÝÐ ÔÕáÚâÞß ÜaèØÝÐÜa) ÚÐÔÐ je ÑÐâÕàØjÐ "
-"áÛÐÑÐ"
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"¿ÞÚàeûÕ ÚÞÜÐÝÔÕ ×ÐÚÐ×ÐÝÕ at ÚÞÜÐÝÔÞÜ,ÚÐÞ Ø  batch  ÚÞÜÐÝÔÕ ÚÐÞ jÕ "
-"ÞßâÕàeûÕÝÞáâ\n"
-"áØáâÕÜÐ ÜÐÛa."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron jÕ áâÐÝÔÐàÔÝØ UNIX ßàÞÓàÐÜ ÚÞjØ ßÞÚàeûÕ ÚÞàØáÝØçÚÕ ßàÞÓàÐÜÕ\n"
-"ßàÕàØÞÔØçÝÞ ã ×ÐÚÐ×ÐÝÞ ÒàÕÜÕ. vixie cron  ÔÞÔÐjÕ ÞßæØjÕ ßàÞáâÞÜ UNIX cron,"
-"ãÚùãçãjãûØ ÑÞùã  áØÓãàÝÞáâ Ø ÑÞùã ßÞÔÕáØÒÞáâ."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ÔÐjÕ ßÞÔàèÚã ×Ð ÜØèÐ ×Ð âÕÚáãÛÐÝÞ-ÑÐ×ØàÐÝÕ ÐßÛØÚÐæØjÕ ÚÐÞ èâÞ jÕ\n"
-"Midnight Commander.¸áâÞ âÐÚÞ ÔÐjÕ ßÞÔàèÚã ×Ð  pop-up ÜÕÝØje ÝÐ  ÚÞÝ×ÞÛØ."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake áâÐàâÐ ØáßØâØÒÐúÕ åÐàÕÔÒÕàÐ, Ø ßÞ ßÞâàÕÑØ óÕ ßÞÔÕáØâØ \n"
-"ÝÞÒØ/Ø×ÜÕúÕÝØ åÐàÔÒÕà."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache jÕ  WWW áÕàÒÕà. ¾Ý áÕ ÚÞàØáâØ ÔÐ ÞßáÛãÖãjÕ  HTML äÐjÛÞÒÕ\n"
-"Ø CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"¸ÝâÕàÕÝâ áãßÕà áÕàÒÕà ÔÕÜÞÝ (×ÝÐÝ ÚÐÞ netd) áâÐàâÐ \n"
-"àÐ×ÝÕ ØÝâÕàÝÕâ áÕàÒØáÕ.¾Ý jÕ ÞÔÓÞÒÞàÐÝ ×Ð ßÞÚàÕâaúÕ ÜÝÞÓØx áÕàÒØáÐ ÚÐÞ Ýßà. "
-"elnet, ftp, rsh, Ø  rlogin.¸áÚùãçãjãûØ úÕÓÐ, ØáÚùãçãjÕâÕ Ø áÕàÒØáÕ \n"
-"×Ð ÚÞjÕ jÕ ÞÝ ÞÔÓÞÒÞàÐÝ."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"¿ÞÚàÕÝØâÕ äØÛâàØàÐúÕ ßÐÚÕâÐ ×Ð Linux ÚÕàÝÕÛ áÕàØøÕ 2.2, ÔÐ ÑØ ßÞÔÕáØÛØ\n"
-"firewall àÐÔØ ×ÐèâØâÕ ÒÐèÕ ÜÐèØÝÕ ÞÔ ÜàÕÖÝØå ÝÐßÐÔÐ."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"¾ÒÐj ßÐÚÕâ ÐÚâØÒØàÐ ÞÔÐÑàÐÝã ÜÐßã âÐáâÐâãàÕ ÚÐÚÞ jÕ ßÞÔeèÕÝÞ \n"
-"ã  /etc/sysconfig/keyboard.¾ÒÞ áÕ ßÞÔeèÐÒÐ ÚÞàØáâeûØ kbdconfig ÐÛÐâÚã.\n"
-"ÂàÕÑÐ ÔÐ ÑãÔÕ ãÚùãçÕÝ ÝÐ ÒeûØÝã ÜaèØÝa."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"°ãâÞÜÐâáÚÐ àÕÓÕÝÕàÐæØøÐ ÚÕàÝÕÛÞÒÞÓ ×ÐÓÛÐÒùÐ ã /boot ×Ðr\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "°ãâÞÜÐâáÚÐ ÔÕâÕÚæØøÐ Ø ÚÞÝäØÓãàÐæØøÐ åÐàÔÒÕàÐ ßàØ áâÐàâÐúã áØáâÕÜÐ."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf óÕ ßÞÝÕÚÐÔ Ø×ÒÞÔØâØ àÐ×ÝÕ ×ÐÔÐâÚÕ âÞÚÞÜ\n"
-"áâÐàâÐúÐ áØáâÕÜÐ àÐÔØ ÞÔàÖÐÒÐúÐ Ø ßÞÔÕèÐÒÐúÐ áØáâÕÜÐ."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd jÕ print ÔÕÜÞÝ ßÞâàÕÑÐÝ  ÔÐ ÑØ  lpr àÐÔØÞ ÔÞÑàÞ.ÂÞ jÕ \n"
-"ã ÞáÝÞÒØ áÕàÒÕà ÚÞjØ ÐàÑØâàØàÐ  print ßÞáÛÞÒÕ èâÐÜßÐçã(ØÜÐ)."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux-ÞÒ ²ØàâãÕÛÝØ ÁÕàÒÕà, ÚÞàØáâØ áÕ ×Ð Ø×ÓàÐÔúã Ñà×ÞÓ Ø ÔÞáâãßÝÞÓ\n"
-"áÕàÒÕàÐ."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"½Ð×ÒÐÝ  (BIND) jÕ Domain Name Server (DNS) ÚÞjØ áÕ ÚÞàØáâØ ×Ð ÔÐje  \n"
-"host ØÜÕ  IP ÐÔàÕáØ."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"¼ÞÝâØàaúÕ Ø ÔÕÜÞÝâØàaúÕ áÒØå ¼àeÖÝØå äÐjÛ áØáâÕÜa(NFS), SMB (Lan\n"
-"Manager/Windows), Ø  NCP (NetWare) âaçÐÚÐ ÜÞÝâØàaúa. "
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"°ÚâØÒØàaúÕ Ø ÔÕÐÚâØÒØàaúÕ áÒØå ÜàeÖÝØå ØÝâÕàäÕjáÐ ÚÞÝäØÓãàØáÐÝØå ×Ð áâÐàâ \n"
-"ßàØ ßÞÔØ×aúã áØáâÕÜÐ."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS jÕ ßÞßãÛÐàÝØ ßàÞâÞÚÞÛ ×Ð àÐ×ÜÕÝã  äÐjÛÞÒa ßàÕÚÞ TCP/IP ÜàeÖÐ.\n"
-"¾ÒÐj áÕàÒØá ÞÜÞÓãûÐÒÐ äãÝÚæØÞÝÐÛÝÞáâ NFS áÕàÒÕàÐ,ÚÞjØ áÕ ÚÞÝäØÓãàØèÕ ßàÕÚÞ \n"
-"/etc/exports ÔÐâÞâÕÚe."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS jÕ ßÞßãÛÐàÝØ ßàÞâÞÚÞÛ ×Ð àÐ×ÜÕÝã  äÐjÛÞÒa ßàÕÚÞ TCP/IP ÜàeÖÐ.\n"
-"¾ÒÐj áÕàÒØá ÞÜÞÓãûÐÒÐ äãÝÚæØÞÝÐÛÝÞáâ NFS  file locking äãÝÚæØjÕ"
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"°ãâÞÜÐâáÚØ ãÚùãçãøÕ numlock âÐáâÕà ßÞÔ ÚÞÝ×ÞÛÞÜ\n"
-"Ø ã XFree ßàØ áâÐàâÐúã."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "¿ÞÔàèÚÐ ×Ð OKI 4w Ø ÚÞÜßÐâØÑØÛÝÕ Üã  win èâÐÜßÐçÕ."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA ßÞÔàèÚÐ  áÕ ÞÑØçÝÞ ÚÞàØáâØ ×Ð  ÕâÕàÝÕâ Ø ÜÞÔÕÜÕ ã ÛÐßâÞßÞÒØÜÐ.\n"
-"½ÕûÕ áÕ ßÞÚàÕÝãâØ ãÚÞÛØÚÞ ÝØjÕ ÚÞÝäØÓãàØáÐÝ âÐÚÞ ÔÐjÕ ÑÕ×ÑÕÔÝÞ ØÝáâÐÛØàÐÝ \n"
-"ÝÐ áØáâÕÜã ÚÞÜ ÝØjÕ ßÞâàÕÑÐÝ."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"¿ÞàâÜÐßÕà ãàÐÒùÐ  RPC ÚÞÝÕÚæØjÐÜa,ÚÞjÕ ÚÞàØáâÕ\n"
-"ßàÞâÞÚÞÛØ ÚÐÞ NFS Ø  NIS.¿ÞàâÜÐß áÕàÒÕà ÜÞàÐ ÑØâØ ßÞÚàÕÝãâ ÝÐ ÜaèØÝÐÜa\n"
-"ÚÞjÕ àÐÔÕ ÚÐÞ áÕàÒÕàØ ×Ð ßàÞâÞÚÞÛÕ ÚÞjØ ÚÞàØáâÕ RPC ÜÕåÐÝØ×ÐÜ."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix jÕ  Mail Transport Agent,ÚÞjØ ã áâÒÐàØ \n"
-"ßàÕÜeèâÐ ßÞèâã áÐ jÕÔÝÕ ÜaèØÝÕ ÝÐ ÔàãÓã."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"çãÒÐ Ø ÞÑÝÐÒùÐ áØáâÕÜáÚØ  entropy pool ×Ð ÒÕûØ ÚÒÐÛØâÕâ ÓÕÝÕàØáaúe\n"
-"áÛãçÐjÝØå ÑàÞjÕÒa."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"´ÞÔÕùãøÕ raw ãàÕüÐøÕ ×Ð ÑÛÞÚ ãàÕüÐøÕ (ÚÐÞ èâÞ áã åÐàÔ ÔØáÚ\n"
-"ßÐàâØæØøÕ), èâÞ ÜÞóÕ ÑØâØ ÚÞàØáÝÞ ×Ð ÐßÛØÚÐæØøÕ ÚÐÞ èâÞ øÕ Oracle"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed ÔÕÜÞÝ ÔÞ×ÒÞùÐÒÐ ÐãâÞÜÐâáÚÞ IP àãâeà update-ÞÒaúÕ ßàÕÚÞ\n"
-"RIP ßàÞâÞÚÞÛÐ.´ÞÚ áe RIP ÔÞáâÐ ÚÞàØáØâØ ÝÐ ÜÐÛØÜ ÜàeÖÐÜÐ,ÚÞÜßÛÕÚáÝØjØ \n"
-" routing ßàÞâÞÚÞÛØ áã ßÞâàÕÑÝØ ×Ð ÚÞÜßÛÕÚáÝÕ ÜàeÖÕ."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat ßàÞâÞÚÞÛ ÔÞ×ÒÞùÐÒÐ ÚÞàØáÝØæØÜÐ ÝÐ ÜàeÖØ ÔÐ ÞÜÞÓãûe\n"
-"ÜeàeúÕ ßÕàäÞàÜÐÝáØ ×Ð ÑØÛÞ ÚÞjã ÜaèØÝã ÝÐ âÞj  ÜàeÖØ."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers ßàÞâÞÚÞÛ ÞÜÞÓãûÐÒÐ ÚÞàØáÝØæØÜÐ ÝÐ ÜàeÖØ ÔÐ ÞâÚàØjã ÚÞ je\n"
-"ãÛÞÓÞÒÐÝ ÝÐ ÔàãÓØÜ ÜaèØÝÐÜÐ."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho ßàÞâÞÚÞÛ ÔÞ×ÒÞùÐÒÐ ãÔaùÕÝØÜ ÚÞàØáÝØæØÜÐ ÔÐ ÔÞÑØjã ÛØáâã áÒØå\n"
-"ÚÞàØáÝØÚÐ ãÛÞÓÞÒÐÝØå ÝÐ áØáâÕÜ áÐ ßÞÚàÕÝãâØÜ rwho ÔÕÜÞÝÞÜ (áÛØçÝÞ finger-ã)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "¿ÞÚàÕóÕ áØáâÕÜ ×Ð ×ÒãÚ ÝÐ ÒÐèÞø ÜÐèØÝØ"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog jÕ ÞÑjÕÚÐâ ßÞÜÞûã ÚÞÓ ÜÝÞÓØ ÔÕÜÞÝØ ÚÞàØáâÕ ×Ð ÛÞÓÞÒaúÕ ßÞàãÚa\n"
-"ã àÐ×ÝØÜ áØáâÕÜáÚØÜ ÛÞÓ äÐjÛÞÒØÜa.´ÞÑàÐ je ØÔÕøÐ ØÜaâØ ãÒÕÚ ßÞÚàÕÝãâ syslog."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "¿ÞÔØÖÕ ÔàÐøÒÕàÕ ×Ð ÒÐèÕ usb ãàÕüÐøÕ."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "¿ÞÚàeûÕ X ÄÞÝâ áÕàÒÕà (ßÞâàÕÑÝÞ ×Ð ßÞÚàÕâÐúÕ XFree)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "¸×ÐÑÕàØâÕ ÚÞøÕ áÕàÒØáØ  âàÕÑÐ ÐãâÞÜÐâáÚØ ÔÐ áÕ áâÐàâãøã ßàØ boot-Ðúã"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "ÈâÐÜßÐç"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "¸ÝâÕàÝÕâ"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "ÁØáâÕÜáÚØ ÜÞÔ"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "¾ßæØøÕ ×Ð ãÔÐùÕÝØ lpd"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "ÁÕàÒÕà,±Ð×Õ ßÞÔÐâÐÚa"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "ãàÕòÐø"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "ßÞÚàÕÝãâÞ"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "×ÐãáâÐÒùÕÝÞ"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "ÁÕàÒØáØ Ø ÔÕÜÞÝØ"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"ÖÐÛØÜ ÐÛØ ÝÕÜa ÔÞÔÐâÝØå ØÝäÞàÜÐæØja\n"
-"Þ ÞÒÞÜ áÕàÒØáã."
-
-#: ../../services.pm_.c:222
-#, fuzzy
-msgid "Infos"
-msgstr "¸ÝäÞ"
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "¿àØ áâÐàâaúã"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "ÁâÐâãá:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "ÁÕÚâÞà"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "¸ÝáâÐÛØàÐÜ ßÐÚÕâ %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"½Õ ÜÞÓã ßàÞçØâÐâØ âÐÑÕÛã ßÐàâØæØøÐ, ÜÝÞÓÞ øÕ ØáÚÒÐàÕÝÐ ×Ð ÜÕÝÕ :(\n"
-"¿ÞÚãèÐûã ÔÐùÕ ×ÐÞÑØÛÐ×ÕûØ ÛÞèÕ ßÐàâØæØøÕ"
-
-#: ../../standalone/drakautoinst_.c:44
-#, fuzzy
-msgid "Error!"
-msgstr "³àÕèÚÐ"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "¿ÞáâØÝáâÐÛÐæØÞÝÐ ÚÞÝäØÓãàÐæØøa"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "KÞÝäØÓãàÐæØøa áâØÛÐ áâÐàâaúa"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:144
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:160
-msgid "$_"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:242 ../../standalone/drakgw_.c:600
-msgid "Congratulations!"
-msgstr "çÕáâØâÐÜ !"
-
-#: ../../standalone/drakautoinst_.c:243
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:281
-#, fuzzy
-msgid "Auto Install"
-msgstr "¸ÝáâÐÛØàÐø"
-
-#: ../../standalone/drakautoinst_.c:343
-#, fuzzy
-msgid "Add an item"
-msgstr "´ÞÔÐø ÚÞàØáÝØÚÐ"
-
-#: ../../standalone/drakautoinst_.c:350
-#, fuzzy
-msgid "Remove the last item"
-msgstr "ÄÞàÜÐâØàÐúÕ loopback ÔÐâÞâÕÚe %s"
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "´eùeúÕ ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "´eùeúÕ ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ jÕ âàÕÝãâÝÞ ÞÜÞÓãûÕÝÞ "
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"¿ÞÔeèÐÒaúe Ôeùeúa ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ jÕ Òeû ×ÐÒàèÕÝÞ.\n"
-"ÂàÕÝãâÝÞ jÕ ÞÜÞÓãûÕÝÞ.\n"
-"\n"
-"èâÐ ÖÕÛØâÕ ÔÐ ãàÐÔØâe?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "ÞÝeÜÞÓãûØ"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "ãÚÛÞÝØ"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "ßÞÝÞÒÞ ßÞÔÕáØ"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "ÃÚÛaúÐÜ áÕàÒØáe..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "´eùeúÕ ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ jÕ ÞÝeÜÞÓãûÕÝÞ."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "´eùeúÕ ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ jÕ âàÕÝãâÝÞ ÞÝeÜÞÓãûÕÝÞ"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"¿ÞÔeèÐÒaúe Ôeùeúa ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ jÕ Òeû ×ÐÒàèÕÝÞ.\n"
-"ÂàÕÝãâÝÞ jÕ ÞÝeÜÞÓãûÕÝÞ.\n"
-"\n"
-"èâÐ ÖÕÛØâÕ ÔÐ ãàÐÔØâe?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "ÞÜÞÓãûØ"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr ">¾ÜÞÓãûÐÒÐÜ áÕàÒØáØ..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "´eùeúÕ ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ jÕ ÞÜÞÓãûÕÝÞ."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"²aè ÚÞÜßjãâÕà ÜÞÖÕâÕ ßÞÔÕáØâØ ×Ð ÔeùeúÕ úÕÓÞÒÕ ¸ÝâÕàÝÕâ ÚÞÝÕÚæØje.\n"
-"áÐ ÞÒÞÜ ÞßæØjÞÜ, ÔàãÓØ ÚÞÜßjãâÕàØ ÝÐ ÒaèÞj ÛÞÚÐÛÝÞj ÜàeÖØ ûÕ ÜÞûØ ÔÐ "
-"ÚÞàØáâe¸ÝâÕàÝÕâ ÚÞÝÕÚæØjã áÐ ÞÒÞÓ ÚÞÜßjãâÕàa.\n"
-"\n"
-"½ÐßÞÜÕÝa: ßÞâàÕÑÐÝa ÒÐÜ jÕ ÜàeÖÝÐ ÚÐàâØæÐ ÔÐ ÑØ ßÞÔÕáØÛØ ÛÞÚÐÛÝã ÜàeÖã"
-"(LAN).\n"
-"\n"
-"´Ð ÛØ ÖÕÛØâÕ ÔÐ ßÞÔÕáØâÕ ÔeùeúÕ ¸ÝâÕàÝÕâ ÚÞÝÕÚæØje ?"
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "¸ÝâÕàäÕjá %s (ÚÞàØáâeûØ ÜÞÔãÛ %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "¸ÝâÕàäÕjá %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "½ÕÜÐ ÜàeÖÝÞÓ ÐÔÐßâÕàÐ ã ÒaèÕÜ áØáâÕÜã !"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"½ØjÕ ÔÕâÕÚâÞÒÐÝÐ ÝØjÕÔÝÐ ÜàeÖÝÐ ÚÐàâØæa. ¿ÞÚàÕÝØâe ÐÛÐâ ×Ð ÚÞÝäØÓãàØáaúÕ "
-"åÐàÔÒÕàa."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "¼àeÖÝØ ØÝâÕàäejá"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"¿ÞáâÞjØ áÐÜÞ jÕÔÐÝ ÚÞÝäØÓãàØáÐÝ ÜàeÖÝØ ÐÔÐßâÕà ÝÐ ÒaèÕÜ áØáâÕÜã:\n"
-"\n"
-"%s\n"
-"\n"
-"ÁÐÔÐ ßÞÔÕÐÒÐÜ Òaèã ÛÞÚÐÛÝã ÜàeÖã áÐ ÞÒØÜ ÐÔÐßâÕàÞÜ."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "¸×ÐÑÕàØâÕ ÚÞjØ ûÕ ÜàeÖÝØ ÐÔÐßâÕà ÑØâØ ÚÞàØèâÕÝ ×a LANÜàeÖã."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"ÃßÞ×Þàeúe, ÜàeÖÝØ ÐÔÐßâÕà jÕ Òeû ÚÞÝäØÓãàØáÐÝ. JÐ ûã ÓÐ áÐÔÐ àÕÚÞÝäØÓãàØáÐâØ."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "¿ÞâÕÝæØjÐÛÝØ ÚÞÝäÛØÚâ LAN ÐÔàÕáe ã âàÕÝãâÝÞÜ ÚÞÝäØÓ. %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "´ÕâÕÚâÞÒÐÝÐ Firewalling ÚÞÝäØÓãàÐæØja"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"ÃßÞ×Þàeúe ! ¿ÞáâÞjeûa firewalling ÚÞÝäØÓãàÐæØja je ÔÕâÕÚâÞÒÐÝa. ¼ÞÖÔaûÕ ÑØâØ "
-"ßÞâàÕÑÝÞ àãçÝÞ ßÞÔeèÐÒaúÕ ÝÐÚÞÝ ØÝáâÐÛÐæØje."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "KÞÝäØÓãàÐæØjÐ ã âÞÚã..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "ºÞÝäØÓãàØáaúÕ áÚàØßâØ,ØÝáâÐÛÐæØjÐ áÞäâÒÕàÐ, áâÐàâaúÕ áÕàÒØáÐ..."
-
-#: ../../standalone/drakgw_.c:312
-#, c-format
-msgid "Problems installing package %s"
-msgstr "¿àÞÑÛÕÜØ ßàØ ØÝáâÐÛÐæØjØ %s ßÐÚÕâa"
-
-#: ../../standalone/drakgw_.c:601
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"ÁÒÕ jÕ ßÞÔeèÕÝÞ.\n"
-"ÁÐÔÐ ÜÞÖÕâÕ ÔÕÛØâØ ¸ÝâÕàÝÕâ ÚÞÝÕÚæØjã áÐ ÔàãÓØÜ ÚÞÜßjãâÕàØÜÐ ÝÐ ÒaèÞj "
-"ÛÞÚÐÛÝÞj ÜàeÖØ  (LAN), ÚÞàØáâÕûØ ÐãâÞÜÐâáÚã ÜàeÖÝã ÚÞÝäØÓãàÐæØjã (DHCP)."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"¿ÞÔeèÐÒaúe Ôeùeúa ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ jÕ Òeû ×ÐÒàèÕÝÞ ÐÛØ jÕ âàÕÝãâÝÞ "
-"ÞÝeÜÞÓãûÕÝÞ."
-
-#: ../../standalone/drakgw_.c:619
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"¿ÞÔeèÐÒaúe Ôeùeúa ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ jÕ Òeû ×ÐÒàèÕÝÞ Ø âàÕÝãâÝÞ jÕ ÞÜÞÓãûÕÝÞ."
-
-#: ../../standalone/drakgw_.c:620
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "´Þ áÐÔÐ ´eùeúÕ ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ ÝØjÕ ßÞÔeèÐÒÐÝÞ."
-
-#: ../../standalone/drakgw_.c:625
-msgid "Internet connection sharing configuration"
-msgstr "ºÞÝäØÓãàÐæØjÐ ´eùeúÐ ¸ÝâÕàÝÕâ ÚÞÝÕÚæØje"
-
-#: ../../standalone/drakgw_.c:632
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"´ÞÑàÞÔÞèÛØ ã ÐÛÐâ ×Ð ßÞÔeèÐÒaúÕ ´eùeúa ¸ÝâÕàÝÕâ ÚÞÝÕÚæØjÕ\n"
-"%s\n"
-"\n"
-"ºÛØÚÝØâÕ ÝÐ ¿ÞÔÕáØ (Configure) ÔÐ ÑØ ßÞÚàÕÝãÛØ ßÞÔeèÐÒaúÕ."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "¿ÞÔÕèÐÒÐúÕ ÜàÕÖe (%d ÐÔÐßâÕàa)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:590
-msgid "Profile: "
-msgstr "¿àÞäØÛ: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "ÃÚÛÞÝØ ßàÞäØÛ..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "¿àÞäØÛ ×Ð ÑàØáaúe:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "½ÞÒØ ßàÞäØÛ..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "¸ÜÕ åÞáâÐ:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "¸ÝâÕàÝÕâ ßàØáâãß"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "ÂØß:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:400
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:400
-msgid "Interface:"
-msgstr "¸ÝâÕàäÕjá:"
-
-#: ../../standalone/draknet_.c:194
-msgid "Status:"
-msgstr "ÁâÐâãá:"
-
-#: ../../standalone/draknet_.c:199
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:218
-msgid "Starting your connection..."
-msgstr "ÁâÐàâãøÕÜ ÚÞÝÕÚæØjã..."
-
-#: ../../standalone/draknet_.c:226
-msgid "Closing your connection..."
-msgstr "·ÐâÒÐàÐÜ ÚÞÝÕÚæØjã..."
-
-#: ../../standalone/draknet_.c:231
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"ºÞÝÕÚæØjÐ jÕ ×ÐâÒÞàÕÝa.\n"
-"¿ÞÚãèÐjâÕ ÔÐ âÞ ãàÐÔØâe àãçÝÞ ßÞÚàÕâaúÕÜ\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"ÚÐÞ root."
-
-#: ../../standalone/draknet_.c:234
-msgid "The system is now disconnected."
-msgstr "ÁØáâÕÜ jÕ áÐÔa ÔØáÚÞÝÕÚâÞÒÐÝ."
-
-#: ../../standalone/draknet_.c:246
-msgid "Configure Internet Access..."
-msgstr "¿ÞÔÕáØ ¸ÝâÕàÝÕâ ßàØáâãß..."
-
-#: ../../standalone/draknet_.c:253 ../../standalone/draknet_.c:452
-msgid "LAN configuration"
-msgstr "LAN ÚÞÝäØÓãàÐæØøa"
-
-#: ../../standalone/draknet_.c:258
-msgid "Driver"
-msgstr "´àÐjÒÕà"
-
-#: ../../standalone/draknet_.c:258
-msgid "Interface"
-msgstr "¸ÝâÕàäÕjá"
-
-#: ../../standalone/draknet_.c:258
-msgid "Protocol"
-msgstr "¿àÞâÞÚÞÛ"
-
-#: ../../standalone/draknet_.c:258
-#, fuzzy
-msgid "State"
-msgstr "ÁâÐâãá:"
-
-#: ../../standalone/draknet_.c:270
-msgid "Configure Local Area Network..."
-msgstr "¿ÞÔÕáØ ÛÞÚÐÛÝØ ÜàÕÖã..."
-
-#: ../../standalone/draknet_.c:282
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:309
-msgid "Apply"
-msgstr "¿àÞÜÕÝØ"
-
-#: ../../standalone/draknet_.c:328
-msgid "Please Wait... Applying the configuration"
-msgstr "ÁÐÜÞ ÜÞÜÕÝÐâ... ßàØÜÕÝÐ ÚÞÝäØÓãàÐæØøÕ"
-
-#: ../../standalone/draknet_.c:408
-msgid "Connected"
-msgstr "ºÞÝÕÚâÞÒÐÝ"
-
-#: ../../standalone/draknet_.c:408
-msgid "Not connected"
-msgstr "½ØjÕ ÚÞÝÕÚâÞÒÐÝ"
-
-#: ../../standalone/draknet_.c:409
-msgid "Connect..."
-msgstr "ºÞÝÕÚâÞÒaúÕ..."
-
-#: ../../standalone/draknet_.c:409
-msgid "Disconnect..."
-msgstr "´ØáÚÞÝÕÚâÞÒaÝ..."
-
-#: ../../standalone/draknet_.c:434
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"²Ø ÝÕÜÐâÕ ÝØ øÕÔÐÝ ØÝâÕàäÕøá ÚÞøØ øÕ ßÞÔÕèÕÝ.\n"
-"¼ÞàÐâÕ Øå ßàÒÞ ßÞÔÕáØâÕ ÚÛØÚÞÜ ÝÐ 'Configure'"
-
-#: ../../standalone/draknet_.c:456
-msgid "LAN Configuration"
-msgstr "LAN ÚÞÝäØÓãàÐæØøa"
-
-#: ../../standalone/draknet_.c:467
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "°ÔÐßâeà %s: %s"
-
-#: ../../standalone/draknet_.c:473
-msgid "Boot Protocol"
-msgstr "ÁâÐàâÝØ(Boot) ßàÞâÞÚÞÛ"
-
-#: ../../standalone/draknet_.c:474
-msgid "Started on boot"
-msgstr "¿ÞÚàÕÝãâÞ ßàØ áâÐàâaúã"
-
-#: ../../standalone/draknet_.c:475
-msgid "DHCP client"
-msgstr "DHCP ÚÛØjÕÝâ"
-
-#: ../../standalone/draknet_.c:499 ../../standalone/draknet_.c:501
-#, fuzzy
-msgid "activate now"
-msgstr "°ÚâØÒØàÐø"
-
-#: ../../standalone/draknet_.c:499 ../../standalone/draknet_.c:501
-#, fuzzy
-msgid "desactivate now"
-msgstr "°ÚâØÒØàÐø"
-
-#: ../../standalone/draknet_.c:555
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"²Ø ÝÕÜÐâÕ ÝØ øÕÔÝã ßÞÔÕèÕÝã ¸ÝâÕàÝÕâ ÚÞÝÕÚæØøã.\n"
-"ºàÕØàÐøâÕ øÕ ÚÛØÚÞÜ ÝÐ 'Configure'"
-
-#: ../../standalone/draknet_.c:579
-msgid "Internet connection configuration"
-msgstr "ºÞÝäØÓãàÐæØjÐ ¸ÝâÕàÝÕâ ÚÞÝÕÚæØjÐ"
-
-#: ../../standalone/draknet_.c:583
-msgid "Internet Connection Configuration"
-msgstr "ºÞÝäØÓãàÐæØjÐ ¸ÝâÕàÝÕâ ºÞÝÕÚæØjÐ"
-
-#: ../../standalone/draknet_.c:592
-msgid "Connection type: "
-msgstr "ÂØß ÚÞÝÕÚæØøÕ: "
-
-#: ../../standalone/draknet_.c:598
-msgid "Parameters"
-msgstr "¿ÐàÐÜÕâàØ"
-
-#: ../../standalone/draknet_.c:625
-msgid "Ethernet Card"
-msgstr "¼àeÖÝÐ ÚÐàâØæa"
-
-#: ../../standalone/draknet_.c:626
-msgid "DHCP Client"
-msgstr "DHCP ÚÛØjÕÝâ"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "´ÞÑàÞèÛØ ÚÞÔ KàÐÚÕàa"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "±ÕÔÝÐ"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "¿ÐàÐÝÞØÔÝÐ"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"½Ð ÞÒÞÜ ÝØÒÞã âàÕÑÐ ÞÑàÐâØâØ ßÐÖúã. ¾Ý ßàÐÒØ ÒÐè áØáâÕÜ ÛÐÚèØÜ\n"
-"×Ð ãßÞâàÕÑã, ÐÛØ Ø  ÒÕÞÜÐ ÞáÕâùØÒØÜ: ÝÕ áÜÕ ÑØâØ ÚÞàØèâÕÝ ÝÐ ÜÐèØÝØ\n"
-"ÚÞøÐ øÕ ßÞÒÕ×ÐÝÐ áÐ ÔàãÓØÜ ÜÐèØÝÐÜÐ ØÛØ ÝÐ ØÝâÕàÝÕâ. ¾ÒÔÕ ÝÕ ßÞáâÞøØ\n"
-"ßàØáâãß áÐ ÛÞ×ØÝÚÞÜ."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"»Þ×ØÝÚÕ áã áÐÔÐ ÞÜÞÓãûÕÝÕ, ÐÛØ áe Ø ÔÐùÕ ÝÕ ßàÕßÞàãçãøÕ ÔÐ áÕ ÚÞàØáâØ\n"
-"ÚÐÞ ÜàÕÖÝØ àÐçãÝÐà."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"¾Ô ÝÕÚÞÛØÚÞ ßÞÑÞùèÐúÐ ÝÐ ÞÒÞÜ áØÓãàÝÞáÞÜ ÝØÒÞã, ÝÐø×ÝÐçÐøÝØøØ\n"
-"øÕ ßÞÒÕûÐÝ ÑàÞø áØÓãàÝÞáÝØå ãßÞ×ÞàÕúÐ Ø ßàÞÒÕàÐ."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"¾ÒÞ øÕ áâÐÝÔÐàÔÝÞ áØÓãàÝÞáÝÞ ÞÚàãÖÕúÕ ßàÕßÞàãçÕÝÞ ×Ð àÐçãÝÐàÕ\n"
-"ÚÞjØ  ûÕ ÑØâØ  ÚÞàèûÕÝØ ×Ð ÒÕ×ã áÐ ¸ÝâÕàÝÕâÞÜ ØÛØ ÚÐÞ ÚÛØøÕÝâ.\n"
-"½e ßÞáâÞøÕ áØÓãàÝÞáÝÕ ßàÞÒÕàÕ."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"ÁÐ ÞÒØÜ áØÓãàÝÞáÝØÜ ÝØÒÞÞÜ, ÚÞàØèûÕúÕ ÞÒÞÓ áØáâÕÜÐ ÚÐÞ áÕàÒÕàÐ\n"
-"ßÞáâÐøÕ ÜÞÓãûÕ. ÁØÓãàÝÞáâ øÕ áÐÔÐ ÔÞÒÞùÝÞ ÒÕÛØÚÐ ×Ð ÚÞàØèûÕúÕ\n"
-"ÜÐèØÝÕ ×Ð áÕàÒÕà ÚÞøØ ßàØåÒÐâÐ ÚÞÝÕÚæØøÕ ÑàÞøÝØå ÚÛØøÕÝÐâÐ."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"ÃÚùãçãøÕâÕ ÝØÒÞ 4 ÞßæØøÐ, ÐÛØ øÕ áÐÔÐ áØáâÕÜ ßÞâßãÝÞ ×ÐâÒÞàÕÝ.\n"
-"ÁØÓãàÝÞáÝÕ ÞßæØøÕ áã ÜÐÚáØÜÐÛÝÕ."
-
-#: ../../standalone/draksec_.c:73
-#, fuzzy
-msgid "Security level"
-msgstr "¿ÞÔÕèÐÒÐúÕ áØÓãàÝÞáÝÞÓ ÝØÒÞÐ"
-
-#: ../../standalone/draksec_.c:75
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "¾ßæØøÕ ×Ð áÕàÒÕà"
-
-#: ../../standalone/draksec_.c:76
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:80
-msgid "Setting security level"
-msgstr "¿ÞÔÕèÐÒÐúÕ áØÓãàÝÞáÝÞÓ ÝØÒÞÐ"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "ºÞÝâàÞÛÝØ ÆÕÝâÐà"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "¸×ÐÑÕàØâÕ ÐÛÐâ ÚÞøÕ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "ãßÞâàÕÑÐ: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "´Ð ÛØ ÖÕÛØâÕ ÔÐ BackSpace ÔÐ ÒàÐâØ Delete ã ÚÞÝ×ÞÛã?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "¿àÞÜÕÝØ Cd-Rom"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"ÃÑÐæØâe Òaè ¸ÝáâÐÛÐæØÞÝØ CD ã ßÞÓÞÝ Ø ßàØâØáÝØâÕ OK ÚÐÔa áâÕ áßàÕÜÝØ.\n"
-"ÃÚÞÛØÚÞ ÓÐ ÝÕÜÐâÕ ßàØâØáÝØâÕ ¿ÞÝØèâØ ÔÐ ÑØ Ø×ÑÕÓÛØ live upgrade."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "½Õ ÜÞÓã ÔÐ áâÐàâãjÕÜ live upgrade !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "ÝØøÕ ßàÞÝÐòÕÝ serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "´Ð ØÜØâØàÐÜ àÐÔ 3 âÐáâÕàÐ?"
-
-#: ../../standalone/scannerdrake_.c:51
-#, c-format
-msgid "%s found on %s, configuring it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:58
-#, fuzzy
-msgid "Select a scanner"
-msgstr "¸×ÐÑÕàØâÕ ÚÐàâØæã"
-
-#: ../../standalone/scannerdrake_.c:79
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:83
-#, c-format
-msgid "This %s scanner uses parallel port, which is unsupported for the moment"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Firewalling ÚÞÝäØÓãàÐæØja"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Firewalling ÚÞÝäØÓãàÐæØja"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"²Ø áâÕ Òeû ßÞÔÕáØÛØ firewall.\n"
-"ºÛØÚÝØâÕ ÝÐ ¿ÞÔÕáØ(Configure) ÔÐ ÑØ Ø×ÜÕÝØÛØ ØÛØ ãÚÛÞÝØÛØ firewall"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"ºÛØÚÝØâÕ ÝÐ ¿ÞÔÕáØ(Configure) ÔÐ ÑØ ßÞÔÕáØÛØ áâÐÝÔÐàÔÝØ firewall"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "¸×ÐÑÕàØâÕ øÕ×ØÚ"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "¸×ÐÑÕàØâÕ ØÝáâ.ÚÛÐáã"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "´ÕâÕÚæØøÐ åÐàÔ ÔØáÚa"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "¿ÞÔÕèÐÒÐúÕ ÜØèÐ"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "¸×ÐÑÕàØ âÐáâÐâãàã"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "ÁØÓãàÝÞáâ"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "¿ÞÔÕáØ ÔÐâÞâeçÝÕ áØáâÕÜÕ"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "ÄÞàÜÐâØàÐj ßÐàâØæØje"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "¿ÐÚÕâØ ×Ð ØÝáâÐÛÐæØøã"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "¸ÝáâÐÛØàÐø áØáâÕÜ"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "´ÞÔÐø ÚÞàØáÝØÚÐ"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "¿ÞÔÕáØ ÜàÕÖã"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "¿ÞÔÕáØ áÕàÒØáÕ"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "½ÐßàÐÒØ áâÐàâÝØ ÔØáÚ"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "¸ÝáâÐÛØàÐø áâÐàâÕà"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "ºÞÝäØÓãàØáÐúÕ X-a"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "¸×ÛÐ× Ø× ØÝáâÐÛÐæØøÕ"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"¼ÐÛØ firewall ÚÞÝäØÓãàÐâÞà\n"
-"\n"
-"¾Ý ÚÞÝäØÓãàØèÕ ÛØçÝØ firewall ×Ð ÞÒã Mandrake Linux ÜaèØÝã.\n"
-"·Ð ÜÞûÝÞ firewall àeèÕúe, ßÞÓÛÕÔÐjâe\n"
-"áßÕæØjÐÛØ×ÞÒÐÝã MandrakeSecurity Firewall ÔØáâàØÑãæØjã."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"ÁÐÔÐ ûÕÜÞ ÒÐÜ ßÞáâÐÒØâØ ßØâaúÐ Þ âÞÜÕ ÚÞjÕ áÕàÒØáe ÑØ åâÕÛØ ÔÐ ÔÞ×ÒÞÛØâe\n"
-"ÔÐ áÕ ßÞÒeÖã ÝÐ ¸ÝâÕàÝÕâ.  ÀÐ×ÜØáÛØâÕ ßaÖùØÒÞ Þ ÞÒÞÜe\n"
-"ßØâaúã, jÕà jÕ ÑÕ×ÑÕÔÝÞáâ ÒaèÕÓ ÚÞÜßjãâÕàÐ ÒaÖÝa.\n"
-"\n"
-"ÃÚÞÛØÚÞ âàÕÝãâÝÞ ÝÕ ÚÞàØáâØâe jÕÔÐÝ ÞÔ ÞÒØå áÕàÒØáa, ãÚÛÞÝØâÕ firewall\n"
-"áa úØå.  ¼ÞÖÕâÕ ßàÞÜÕÝØâØ ÞÒÕ ÞßæØje ÑØÛÞ ÚÐÔa ßÞÝÞÒÝØÜ ßÞÚàÕâaúÕÜ\n"
-"ÞÒÕ ÐßÛØÚÐæØje!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"´Ð ÛØ ßÞÚàeûÕâÕ web áÕàÒÕà ÝÐ ÞÒÞj ÜaèØÝØ ÚÞjØ âàÕÑÐ ÔÐ ÑãÔe ÒØòÕÝ\n"
-"ÝÐ æÕÛÞÜ ¸ÝâÕàÝÕâã? ÃÚÞÛØÚÞ ßÞÚàeûÕâÕ webserver ÚÞjØ âàÕÑÐ ÔÐ ÑãÔe ÒØòÕÝ\n"
-"áÐÜÞ áÐ ÞÒÕ ÜaèØÝe, ÞÒÔÕ ÜÞÖÕâÕ ÔÐ ÑÕ×ÑÕÔÝÞ ÞÔÓÞÒÞàØâe ½E.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"´Ð ÛØ ßÞÚàeûÕâÕ name áÕàÒÕà ÝÐ ÞÒÞj ÜaèØÝØ? ÃÚÞÛØÚÞ ÝØáâÕ ßÞÔÕáØÛØ jÞè "
-"jÕÔÐÝ\n"
-"×Ð away IP Ø ×ÞÝáÚÕ ØÝäÞàÜÐæØjÕ ×Ð æÕÛØ ¸ÝâÕàÝÕâ, ÜÞÛØÜ\n"
-"ÒÐá ÔÐ ÞÔÓÞÒÞàØâÕ Ýe.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"´Ð ÛØ ÖÕÛØâÕ ÔÐ ÔÞ×ÒÞÛØâÕ Secure Shell (ssh) ÚÞÝÕÚæØje? ¾ÒÞ\n"
-"jÕ ×ÐÜÕÝÐ ×Ð âÕÛÝÕâ ÚÞjã ÜÞÖÕâÕ ÚÞàØáâØâØ ×Ð ßàØjÐÒã. ÃÚÞÛØÚÞ ÚÞàØáâØâe\n"
-"âÕÛÝÕâ, âàÕÑÐÛØ ÑØ ÔÐ áÕ ßàÕÑÐæØâÕ Ýa ssh. ÂÕÛÕÝeâ ÝØje\n"
-"ÕÝÚàØßâÞÒÐÝ -- âÐÚÞ ÔÐ ÝÕÚØ ÝÐßÐÔaçØ ÜÞÓã ãÚàÐáâØ ÛÞ×ØÝÚã ãÚÞÛØÚÞ je\n"
-"ÚÞàØáâØâe. ssh jÕ ÕÝÚàØßâÞÒÐÝ Ø ÝÕ ÔÞ×ÞÒÞùÐÒÐ ÞÒÐÚÒÕ áâÒÐàØ."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"´Ð ÛØ ÖÕÛØâÕ ÔÐ ÔÞ×ÒÞÛØâÕ telnet ÚÞÝÕÚæØje?\n"
-"¾ÒÞ jÕ ãÖÐáÝÞ ÝÕáØÓãÝÞ, ÚÐÚÞ áÜÞ Ø ÞÑjÐáÝØÛØ ÝÐ ßàÕâåÞáÝÞÜ ÕÚàÐÝã. ¼Ø\n"
-"ÒÐÜ ßàÕßÞàãçãjÕÜÞ ÔÐ ÞÒÔÕ ÞÔÓÞÒÞàØâÕ ½E Ø ÔÐ ÚÞàØáâØâÕ ssh ãÜÕáâÞ\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"´Ð ÛØ ßÞÚàeûÕâÕ FTP áÕàÒÕà ÚÞjØ ÒÐÜ jÕ ßÞâàÕÑÐÝ\n"
-"×Ð ¸ÝâÕàÝÕâ? ÃÚÞÛØÚÞ âÞ àÐÔØâe, ßàÕßÞàãçãjÕÜÞ ÓÐ ÚÞàØáâØâe áÐÜÞ ×a\n"
-"Anonymous âàÐÝáäÕàe. ±ØÛÞ ÚÞjÐ ÛÞ×ØÝÚa ßÞáÛÐâÐ ßàÕÚÞ FTP ÜÞÖÕ ÑØâØ\n"
-"ÜÕâÐ ÝÐßÐÔaçÐ, ßÞèâÞ  FTP âÐÚÞòÕ ÚÞàØáâØ ÝÕÚàØâÞÒÐÝe ÛÞ×ØÝÚe.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"´Ð ÛØ ßÞÚàeûÕâÕ mail áÕàÒÕà? ÃÚÞÛØÚÞ èaùÕâÕ ßÞàãÚÕ ßàÕÚÞ\n"
-"pine, mutt ØÛØ ÝÕÚÞÓ ÔàãÓÞÓ âÕÚáâãÐÛÝÞÓ mail ÚÛØjÕÝâa,\n"
-"ÞÝÔÐ âÞ ÒÕàÞÒÐâÝÞ ÚÞàØáâØâe.  ¸Ýaçe, âàÕÑÐÛØ ÑØ Ôa ãÚÛÞÝØâÕ firewall ×Ð "
-"ÞÒÞ.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"´Ð ÛØ ßÞÚàeûÕâÕ POP ØÛØ IMAP áÕàÒÕà? ¾ÒÞ ÑØ ÚÞàØáâØÛØ \n"
-"×Ð host-ÞÒaúe non-web-ÑÐ×ØàÐÝØå  mail àaçãÝa ×Ð ùãÔe ßàÕÚÞ\n"
-"ÞÒÕ ÜaèØÝe.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"¸×ÓÛÕÔÐ ÔÐ ÚÞàØáâØâÕ 2.2 ÚÕàÝÕÛ.  ÃÚÞÛØÚÞ jÕ Òaè ÜàeÖÝØ IP\n"
-"ÐãâÞÜÐâáÚØ ßÞÔeèÕÝ ×Ð ÚÞÜßjãâÕà ã ÒaèÞj ÚãûØ ØÛØ ÝÐ ßÞáÛã \n"
-"(ÔÞÔeùÕÝÞ ÔØÝÐÜØçÚØ), âàÕÑÐ ÔÐ ÓÐ ÞÜÞÓãûØÜÞ ×Ð ÞÒÞ.  ´a\n"
-"ÛØ jÕ ÞÒÞ ã ßØâaúã?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"´Ð ÛØ Òaè ÚÞÜßjãâÕà ÔÞÑØjÐ ÒàÕÜÕ áØÝåàÞÝØ×ÞÒÐÝÞ áa ÔàãÓØÜ ÚÞÜßjãâÕàÞÜ?\n"
-"ÃÓÛÐÒÝÞÜ áÕ ÞÒÞ ÚÞàØáâØ Ýa áàÕÔúØÜ-ÒÕÛØÚØÜ Unix/Linux ÞàÓÐÝØ×ÐæØjÐÜa\n"
-"àÐÔØ áØÝåàÞÝØ×ÐæØjÕ ÒàÕÜÕÝÐ ßàØjÐÒÕ ØÛØ ×Ð áÛØçÝÕ áâÒÐàØ.  ÃÚÞÛØÚÞ ÝØáâÕ "
-"ÔÕÞ\n"
-"ÒÕÛØÚÕ äØàÜÕ ØÛØ ÝØáâÕ çãÛØ ×Ð ÞÒÞ, ÞÝÔÐ ×ÐÞÑØòØâe \n"
-"ÞÒÞ."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"ºÞÝäØÓãàÐæØjÐ ×ÐÒàèÕÝÐ. ´Ð ÛØ ÔÐ ×ÐßØèÕÜÞ ÞÒÕ Ø×ÜÕÝÕ ÝÐ ÔØáÚ?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "½Õ ÜÞÓã ÔÐ ÞâÒÞàØÜ  %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "½Õ ÜÞÓã ÔÐ ÞâÒÞàØÜ %s àÐÔØ ãßØáa: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "ÁÕàÒÕà, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "¼àeÖÝØ ÚÞÜßjãâÕà, (ÚÛØjÕÝâ)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS áÕàÒÕà, SMB áÕàÒÕà, Proxy áÕàÒÕà, SSH áÕàÒÕà"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome àÐÔÝa áâÐÝØæa"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "°ÛÐâØ ×Ð Palm Pilot ØÛØ Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "ÀÐÔÝÐ áâÐÝØæa"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "ÁÕàÒÕà, Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Office ßàÞÓàÐÜØ: âÕÚáâ ßàÞæÕáÞàØ (kword, abiword), âÐÑÕÛe (kspread, "
-"gnumeric), pdf ßàÕÓÛÕÔÝØæØ, ØâÔ"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "°ãÔØÞ aÛÐâØ: mp3 ØÛØ midi ßÛÕjÕàØ,ÜØÚáÕàØ, ØâÔ"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "KúØÓÕ Ø ºÐÚÞ? (Howto's) ×Ð Linux Ø ±ÕáßÛÐâÝØ ÁÞäâÒÕà"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE ßÐÔÝÐ áâÐÝØæa"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ØâÔ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "¼ãÛâØÜÕÔØja - ²ØÔÕÞ"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "ÁÕâ ÐÛÐâÐ ×Ð ÕÛ.ßÞèâã, ÒÕáâØ, web, âàÐÝáäÕà ÔÐâÞâÕÚa, ØÛØ chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "ÁÕàÒÕà,±Ð×Õ ßÞÔÐâÐÚa"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "°ÛÐâØ ×Ð ÛÐÚÞ ÚÞÝäØÓãàØáaúÕ ÚÞÜßjãâÕàa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "¼ãÛâØÜÕÔØja - ·ÒãÚ"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "°ÛÐâØ"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "´ÞÚãÜÕÝâÐæØja"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "ºÞÝ×ÞÛÝØ ÐÛÐâØ"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "¸ÝâÕàÝÕâ áâÐÝØæa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "¼ãÛâØÜÕÔØjÐÛÝÐ áâÐÝØæa"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN ÚÞÝäØÓãàÐæØøa"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "JÞè ÓàÐäØçÚØå ÞÚàãÖeúa (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K ´ÕáÚâÞß ÞÚàãÖeúÕ, ÞáÝÞÒÝÞ ÓàÐäØçÚÞ ÞÚàãÖeúÕ áa ÚÞÛÕÚæØjÞÜ ßàÐâeûØå ÐÛÐâa"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "³àÐäØçÚÞ ¾ÚàãÖeúe"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "ÀÐ×ÒÞøÝÐ"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "°ÛÐâØ ×Ð ÚàÕØàaúÕ Ø ßàÖeúÕ CDa"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "ÀÐÔÝÐ(Office) áâÐÝØæa"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, ØâÔ"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "³àÐäØçÚØ ßàÞÓàÐÜØ ÚÐÞ èâÞ jÕ Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C Ø C++ àÐ×ÒÞjÝÕ ÑØÑÛØÞâÕÚe, ßàÞÓàÐÜØ  Ø ßàÞßàÐâÝÕ ÔÐâÞâÕÚe"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "¼àÕÖÝØ ÁÕàÒÕà"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "ÁÕàÒÕà, µÛ.ßÞèâÐ/Groupware/²ÕáâØ"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "ÁâÐÝØæÐ ×Ð ØÓàã"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "²ØÔÕÞ ßÛÕjÕàØ Ø ÕÔØâÞàØ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "¼ãÛâØÜÕÔØja - ³àÐäØÚa"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "·ÐÑÐÒÝØ ßàÞÓàÐÜØ: ÐàÚÐÔÕ, ØÓÕ ÝÐ âÐÑÛØ, áâàÐâÕÓØjÕ, ØâÔ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"ÁÚãß ÐÛÐâÐ ×Ð çØâaúÕ Ø áÛaúÕ ÕÛ.ßÞèâÕ Ø ÒÕáâØ (pine, mutt, tin..) Ø ×Ð "
-"ßàÕâàaÖØÒaúe ¸ÝâÕàÝÕâa"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "°àåØÒØàaúÕ, ÕÜãÛÐâÞàØ, ÜÞÝØâÞàØÝÓ"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "»ØçÝÕ äØÝÐÝáØje"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"³àÐäØçÚÐ ÞÚàãÖeúÐ ×Ð áÕâÞÜ ÚÞàØáÝØçÚNFS server, SMB server, Proxy serverNFS "
-"server, SMB server, Proxy serverØå ÐßÛØÚÐæØjÐ Ø ÔÕáÚâÞßÐÛÐâa"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "ºÛØjÕÝâØ ×Ð àÐ×ÛØçØâÕ ßàÞâÞÚÞÛÕ ãÚùãçãjãûØ Ø ssh"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "¸ÝâÕàÝÕâ ßàØáâãß"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "¿àÞÓàÐÜØ ×Ð ßãèâaúÕ ×ÒãÚa Ø ÒØÔÕa"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "´àãÓØ ÓàÐäØçÚØ ÔÕáÚâÞßÞÒØ"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "ÕÔØâÞàØ,èÕÛÞÒØ, ÐÛÐâØ ×Ð ÔÐâÞâÕÚÕ, âÕàÜØÝÐÛØ"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "¿àÞÓàÐÜØ ×Ð ãßàÐÒùaúÕ ÒaèØÜ äØÝÐÝáØjÐÜa, ÚÐÞ èâÞ jÕ gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "¸Óàe"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "ÃßàÐÒùaúÕ ßàØÒÐâÝØÜ ØÝäÞàÜÐæØjÐÜa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "¼ãÛâØÜÕÔØja - CD ßàÖeúÕ"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "½ÐãçÝa àÐÔÝÐ áâÐÝØæa"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "´ÒÞáÜØáÛÕÝÞ (%s), ÑãÔØâÕ ßàÕæØ×ÝØøØ\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (ßÞ default-ã %s)"
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "²Ðè Ø×ÑÞà ? (ßÞ default-ã %s ãÝÕáØ `none' ×Ð ÝØøÕÔÐÝ) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "ÝÕ ÜÞÓã ÞâÒÞàØâØ /etc/sysconfig/autologin ×Ð çØâaúe: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "´Ð ÛØ åÞûÕâÕ ÔÐ àÕáâÐàâãjeâÕ ÜàÕÖe?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "´Ð ÛØ áÕ áÛaÖÕâe?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "ÁÐÔÐÜ âàÕÑÐ ÔÐ áÕ àÕáâÐàâãjÕ ÜàeÖÝØ ØÝâÕàäÕjá:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "ÁÐÔÐ âàÕÑÐ ÔÐ áÕ àÕáâÐàâãjÕ ÜàeÖÝØ ãàÕòÐø  %s. ´Ð ÛØ áÕ áÛaÖÕâÕ ?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "ÃÚÞÛØÚÞ ÝØøÕ ÔàãÓÐçØøÕ ÞÔàÕòÕÝÞ, ÞãÑØçÐøÕÝ Ø×ÑÞà øÕ \"/dev/hda\"\n"
-#~ "(ÜÐáâÕà ÔØáÚ ÝÐ ßàØÜÐàÝÞÜ ÚÐÝÐÛã) ØÛØ \"/dev/sda\" (first SCSI disk)."
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "¾ÒÞ áã ßÞáâÐÒùÝÕ ÞßæØøÕ.\n"
-#~ "¼ÞÖÕâÕ ÔÞÔÐâØ ÝÞÒÕ ØÛØ Ø×ÜÕÝØâØ áâÐàÕ."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "²àÕÜÕ ÚÞÝÕÚæØøÕ: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "¸×ÐÑÕàØâÕ default (ÞáÝÞÒÝÞÓ) ÚÞàØáÝØÚa:"
-
-#~ msgid "Spooler: "
-#~ msgstr "ÁØáâÕÜ ×Ð èâÐÜßÐúÕ (Spooler): "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "ÁÐÔÐ âÕáâØàÐøâÕ ÜØèÐ"
-
-#~ msgid "Press next to continue."
-#~ msgstr "¿àØâØáÝØâÕ \"ÁÛÕÔeûØ\" ÔÐ ÑØ ÝÐáâÐÒØÛØ "
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "¸×ÐÑÕàØâÕ ÒÐÜÐ ÞÔÓÞÒÐàÐøãûØ øÕ×ØÚ ×Ð ØÝáâÐÛØàÐúÕ Ø ÚÞàØèûÕúÕ áØáâÕÜÐ."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "¼ÞàÐâÕ ÔÐ ßàØåÒÐâØâe ãáÛÞÒÕ ÛØæÕÝæe ÔÐ ÑØ ÝÐáâÐÒØÛØ ØÝáâÐÛÐæØjã.\n"
-#~ "\n"
-#~ "\n"
-#~ "¼ÞÛØÜ ÒÐá ÔÐ ßàØâØáÝÕâÕ ÝÐ \"¿àØåÒÐâÐÜ\" ãÚÞÛØÚÞ áÕ áÛaÖÕâe áÐ ãáÛÞÒØÜa.\n"
-#~ "\n"
-#~ "\n"
-#~ "¼ÞÛØÜ ÒÐá ÔÐ ßàØâØáÝÕâÕ Ýa \"¾ÔÑØjÐÜ\" ãÚÞÛØÚÞ áÕ ÝÕ áÛaÖÕâe áÐ ãáÛÞÒØÜa."
-#~ "¸ÝáâÐÛÐæØjaûÕ ÑØâØ ×ÐÒèeÝÐ ÑÕ× ØÜÐÚÒØå ßàÞÜÕÝa"
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "¸×ÐÑÕàØâÕ âØß ÚÞÜãÝØÚÐæØøÕ áÐ âÐáâÐâãàÞÜ ÞÔ ÓÞàÕ ÝÐÒÕÔÕÝØå"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "¸×ÐÑÕàØâÕ:\n"
-#~ "\n"
-#~ " - ÁÐ ßÞÔÕèÐÒÐúØÜÐ (Customized): ÃÚÞÛØÚÞ áâÕ ãßÞ×ÝÐâØ áÐ »ØÝãÚáÞÜ ÜÞûØ "
-#~ "ûÕâÕ\n"
-#~ "ÔÐ Ø×ÐÑÕàÕâÕ ÝÞàÜÐÛ,ÔÕÒÕÛÞßÜÕÝâ ØÛØ áÕàÒÕà ÜÞÔ ØÝáâÐÛÐæØøÕ.\n"
-#~ "¸×ÐÑÕàØâÕ \"½ÞàÜÐÛ\" ØÝáâÐÛÐæØøã ßàØ ãÞÑØçÐøÕÝÞÜ ÚÞàØèûÕúã àÐçãÝÐàÐ\n"
-#~ "¼ÞÖÕâÕ Ø×ÐÑàÐâØ \"´ÕÒÕÛÞßÜÕÝâ\" ØÝáâÐÛÐæØøã ãÚÞÛØÚÞ ûÕâÕ áÕ ßàÒÕÝáâÒÕÝÞ\n"
-#~ "àÐ×ÒÞøÕÜ áÞäâÒÕàÐ, ØÛØ \"ÁÕàÒÕà\" ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ßÞáâÐÒØâÕ áâÐÝÔÐàÔÝã\n"
-#~ "áÕàÒÕà ÜÐèØÝã (×Ð ßÞèâã, èâÐÜßÐúÕ...)\n"
-#~ "\n"
-#~ "\n"
-#~ " - µÚáßÕàâ: ÃÚÞÛØÚÞ áâÕ ÔÞÑàÞ ßÞ×ÝÐøâÕ GNU/Linux Ø ÖÕÛØâÕ Ø×ã×ÕâÝÞ\n"
-#~ "ßÞÔÕáØÒã ØÝáâÐÛÐæØøã ÞÝÔÐ øÕ ÞÒÞ ßàÐÒØ ÜÞÔ ×Ð ÒÐá. ¼ÞûØ ûÕâÕ Ø×ÐÑàÐâØ\n"
-#~ "ÚÞàØèûÕúÕ áØáâÕÜÐ ÚÐÞ \"¿àÕßÞàãçÕÝÞ\"."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "ÁÐÔÐ ÜÞàÐâÕ ÔÕäØÝØáÐâØ ×Ð èâÐ ûÕâÕ ÚÞàØáâØâØ Òaèã ÜaèØÝã.²aè Ø×ÑÞà je:\n"
-#~ "\n"
-#~ "  - ÀÐÔÝÐ áâÐÝØæa : ÞÒÞ jÕ ØÔÕÐÛÐÝ Ø×ÑÞà ãÚÞÛØÚÞ ÝÐÜÕàÐÒÐâÕ ÔÐ ÚÞàØáâØâÕ "
-#~ "ÒÐèÕ ÜaèØÝããÓÛÐÒÝÞÜ ×a áÒÐÚÞÔÝÕÒÝã ãßÞâàÕÑã  (ÞÑàÐÔÐ âÕÚáâÐ,âÐÑÛØæÕ, "
-#~ "ÓàÐäØÚa ØâÔ).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ÀÐ×ÒÞjÝa áâÐÝØæa: áÐÜÞ jÞj  ØÜÕ ÚaÖe. ¸×ÐÑÕàØâÕ ÞÒÞ ãÚÞÛØÚÞ ØÜÐâÕ "
-#~ "ÝÐÜÕàã ÔÐ ÒÐèã ÜaèØÝã ãÓÛÐÒÝÞÜ ÚÞàØáâØâÕ ×Ð àa×ÒÞj áÞäâÒÕàa. ÂÐÔa ûÕ âÕ "
-#~ "ØÜÐâØ ÚÞÜßÛÕâÝã\n"
-#~ "ÚÞÛÕÚæØjã áÞäâÒÕàa  ×Ð ÚÞÜßÐjÛØàaúe, ÔÕÑÐÓØàaúe Ø äÞàÜÐâØàaúe\n"
-#~ "Ø×ÒÞàÝÞÓ ÚÞÔa, ØÛØ ×Ð ÚàÕØàaúÕ áÞäâÒÕàáÚÞØå ßÐÚÕâa.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ÁÕàÒÕà: Ø×ÐÑÕàØâÕ ÞÒÞ ãÚÞÛØÚÞ ØÜÐâÕ ÝÐÜÕàã ÔÐ Mandrake Linux\n"
-#~ "ÚÞàØáâØâÕ ÚÐÞ áÕàÒÕà. ¸ÛØ ÚÐÞ äÐjÛ áÕàÒÕà (NFS ØÛØ  SMB),\n"
-#~ "ØÛØ áÕàÒÕà ßàÞâÞÚÞÛ ×Ð èâÐÜßã(Unix' lp (Line Printer ØÛØ  Windows  SMB\n"
-#~ "èâÐÜßaúe) ØÛØ  ÐãâÕÝâØçÝØ áÕàÒÕà (NIS), ØÛØ ÚÐÞ áÕàÒÕà ×Ð ÑÐ×ã  ßÞÔÐâÐÚa "
-#~ "ØâÔ.\n"
-#~ "ºÐÞ âÐÚÐÒ, ÞÝ ÝeûÕ ØÜaâØ ØÝáâÐÛØàÐÝ ÛãÚáã× (KDE, GNOME...) ."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "ÁÐÔÐ ÜÞÖÕâÕ Ø×ÐÑàÐâØ Óàãßã ßÐÚÕâÐ ÚÞjÕ ÖÕÛØâe\n"
-#~ "ÔÐ ØÝáâÐÛØàÐâÕ. ØÛØ aÖãàØàÐâe.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX ûÕ ×ÐâØÜ ßàÞÒÕàØâØ ÔÐ ÛØ ØÜÐâÕ ÜÕáâÐ ×Ð úØåÞÒÞ ØÝáâÐÛØàaúe.ÃÚÞÛØÚÞ "
-#~ "ÝÕÜa,\n"
-#~ "ÞÝ ûÕ ÒÐá ãßÞ×ÞàØâØ ÝÐ âÞ. ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ÝÐáâÐÒØâe, ÝÐáâÐÒØûÕ áÕ "
-#~ "ØÝáâÐÛÐæØøÐ\n"
-#~ "áÒØå ÞÔÐÑàÐÝØå Óàãßa ÐÛØ ûÕ ÝÕÚØ ßÐÚÕâØ ÞÔ ÜÐúÕÓ ×ÝaçÐøÐ ÑØâØ Ø×ÞáâÐÒùÕÝØ."
-#~ "½Ð ÚàÐjã ÛØáâe\n"
-#~ "ÜÞÖÕâÕ Ø×ÐÑàÐâØ ÞßæØjy \"¿ÞjÕÔØÝaçÝÐ áÕÛÕÚæØjÐ ßÐÚÕâa\";\n"
-#~ "à âÞÜ áÛãçÐjã ÜÞàaûÕâÕ ÑØàÐâØ Ø×Üeòã ÒØèÕ ÞÔ 1000 ßÐÚÕâa..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "ÁÐÔÐ ÜÞÖÕâÕ àãçÝÞ Ø×ÐÑàÐâØ áÒÕ ßÐÚÕâe ÚÞje\n"
-#~ "ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâe.\n"
-#~ "\n"
-#~ "\n"
-#~ "¼ÞÖÕâÕ ÔÐ àaèØàØâØ ØÛØ áÚãßØâØ áâÐÑÛÞ ÚÛØÚÐjãûØ ÝÐ ÞßæØjÕ ÚÞje áÕ ÝÐÛÐ×eã "
-#~ "ãÓÛã\n"
-#~ "ßàÞ×ÞàÐ áÐ ßÐÚÕâØÜa.\n"
-#~ "\n"
-#~ "\n"
-#~ "ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ÒØÔØâÕ ßÐÚÕâÕ áÞàâØàÐÝÕ ßÞ ÐÑÕæÕÔÝÞÜ àÕÔã, ÚÛØÚÝØâÕ ÝÐ "
-#~ "ØÚÞÝã\n"
-#~ "\"¿ÞáâÐÒØ àÐÒÝÞ Ø ÓàãßÝÞ áÞàâØàÐÝÞ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "ÃÚÞÛØÚÞ ÝÕ ÖÕÛØâÕ ÔÐ ÑãÔÕâÕ ãßÞ×ÞàÕÝØ ÝÐ ×ÐÒØáÝÞáâØ, ÚÛØÚÝØâÕ Ýa "
-#~ "\"°ãâÞÜÐâáÚe\n"
-#~ "×ÐÒØáÝÞáâØ\". ÃÚÞÛØÚÞ ÞÒÞ ÖÕÛØâe, ×ÐßÐÜâØâÕ ÔÐ ÔÕáÕÛÕÚâÞÒaúe jÕÔÝÞÓ "
-#~ "ßÐÚÕâa ÜÞÖÕ ÝÕßàØÜeûÕÝÞ\n"
-#~ "ÔÐ ÔÕáÕÛÕÚâãjÕ Ø ÝÕÚÞÛØÚÞ ÔàãÓØå ßÐÚÕâÐ ÚÞjØ ×ÐÒØáÕ ÞÔ úÕÓa."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "ÃÚÞÛØÚÞ ØÜaâÕ áÒe ÓÞàÕ ÝÐÒÕÔÕÝÕ CD-ÞÒe, ÚÛØÚÝØâÕ ÝÐ Ok.\n"
-#~ "ÃÚÞÛØÚÞ ÝÕÜÐâÕ ÝØjÕÔÐÝ CD, ÚÛØÚÝØâÕ Ýa Cancel.\n"
-#~ "°ÚÞ ÒÐÜ ÝÕÔÞáâÐjã  ÝÕÚØ CD-ÞÒØ, ÔÕáÕÛÕÚâãjÕâÕ Øå,Ð ÞÝÔÐ,\n"
-#~ "ÚÛØÚÝØâÕ ÝÐ Ok."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "ÁÐÔÐ ÜÞÖÕâÕ ÔÐ âÕáâØàÐâÕ ÒÐèÕÓ ÜØèÐ. ºÞàØáâØâÕ âÐáâÕàÕ Ø âÞçÚØns and "
-#~ "wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ÚÞÝÕÚâãjâe ÚÞÜßjyâÕà ÝÐ ¸ÝâÕàÝÕâ ØÛØ\n"
-#~ "ÝÐ ÛÞÚÐÛÝã ÜàeÖã Ø×ÐÑÕàØâÕ ßàÐÒã ÞßæØjã. ÜÞÛØÜ ²Ðá ÔÐ ãÚùãçØâÕãàeòÐj\n"
-#~ "ßàÕ ÑØàÐúa ßàÐÒÕ ÞßæØje ÔÐ ÑØ ÔÞ×ÒÞÛØÛØ DrakX-ã ÔÐ ÓÐ ÐãÞÜÐâáÚØ "
-#~ "ÔÕâÕÚâãje.\n"
-#~ "\n"
-#~ "\n"
-#~ "ÃÚÞÛØÚÞ ÝÕÜÐâÕ ÒÕ×ã áÐ ¸ÝâÕàÝÕâÞÜ ØÛØ ÛÞÚÐÛÝÞÜ ÜàeÖÞÜ, Ø×ÐÑÕàØâe\n"
-#~ "\"¸áÚùãçØ ÜàeÖã\".\n"
-#~ "\n"
-#~ "\n"
-#~ "ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ÚÐáÝØjÕ ãàÐÔØâÕ ÚÞÝäØÓãàÐæØjã (ÝÐÚÞÝ ØÝáâÐÛÐæØjÕ)ØÛØ "
-#~ "áâÕ\n"
-#~ "×ÐÒàèØÛØ ÚÞÝäØÓãàØáaúÕ, Ø×ÐÑÕàØâe \"·ÐÒàèÕÝÞ\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "½ØjÕÔÐÜ ÜÞÔÕÜ ÝØjÕ ÔÕâÕÚâÞÒÐÝ. ¸×ÐÑÕàØâÕ áÕàØjáÚØ ßÞàâ ÝÐ ÚÞjÕÜ jeÜÞÔÕÜ "
-#~ "ßàØÚùãçÕÝ.\n"
-#~ "\n"
-#~ "\n"
-#~ "´Ð ÑØ áåÒÐâØÛØ, ßàÒØ áÕàØjáÚØ ßÞàâserial port (ÚÞjØ áÕ ×ÞÒÕ \"COM1\" ßÞÔ "
-#~ "Microsoft\n"
-#~ "Windows-ÞÜ) áÕ ×ÞÒe \"ttyS0\" ßÞÔ Linux-ÞÜ."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "ÁÐÔÐ ÜÞÖÕâÕ ãÝÕâØ dialup ßÞáâÐÒÚe. ÃÚÞÛØÚÞ ÝÕ ×Ýaâe ØÛØ \n"
-#~ "ØÛØ ÝØáâÕ áØÓãàÝØ èâÐ ÔÐ ãÝÕáÕâe, ßàÐÒÕ ØÝäÞàÜÐæØjÕ ÜÞÖÕâÕ ÔÞÑØâØÞÔ\n"
-#~ "ÒaèÕÓ ¸ÝâÕàÝÕâ ßàÞÒÐjÔÕàa. ÃÚÞÛØÚÞ ÝÕ ãÝÕáÕâÕ DNS (ØÜÕ áÕàÒÕàa)\n"
-#~ "ØÝäÞàÜÐæØjã áÐÔa,ÞÒã ØÝäÞàÜÐæØjã ÜÞÖÕâÕ ØÜÐâØ ÚÐÔÐ áÕ ÚÞÝÕÚâãjÕâeÝÐ "
-#~ "áÕàÒØá\n"
-#~ "ÒaèÕÓ ¸ÝâÕàÝÕâ ßàÞÒÐjÔÕàa."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "ÃÚÞÛØÚÞ ØÜaâÕ ÕÚáâÕàÝØ ÜÞÔÕÜ ãÚùãçØâÕ ÓÐ, ÔÐ ÑØ DrakX ÜÞÓÐÞ ÐãâÞÜÐâáÚØ ÔÐ "
-#~ "ÓÐ ÔÕâÕÚâãje."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "ÃÚùãçØâÕ Òaè ÜÞÔÕÜ Ø Ø×ÐÑÕàØâÕ ßàÐÒØ"
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "ÃÚÞÛØÚÞ ÝØáâÕ áØÓãàÝØ ÔÐ áã ÓÞàÕ ÝÐÒÕÔÕÝÕ ØÝäÞàÜÐæØjÕ\n"
-#~ "ØáßàÐÒÝÕ ØÛØ ÝØáâÕ áØÓãàÝØ èâÐ âàÕÑÐ ÔÐ ãÝÕáÕâe, ßàÐÒe\n"
-#~ "ØÝäÞàÜÐæØjÕ ÜÞÖÕâÕ ÔÞÑÐÒØâØ ÞÔ ÒaèÕÓ ¸ÝâÕàÝÕâ ßàÞÒÐjÔÕàa. ÃÚÞÛØÚÞ ÞÒÔeÝe\n"
-#~ "ãÝáÕâÕ DNS (ØÜÕ áÕàÒÕàa) ØÝäÞàÜÐæØjÕ, ÞÒã ØÝäÞàÜÐæØjã ÜÞÖÕâÕÔÞÑÐÒØâØ\n"
-#~ "ÞÔ ÒaèÕÓ ¸ÝâÕàÝÕâ ßàÞÒÐjÔÕàa ÚÐÔÐ áÕ ÚÞÝÕÚâãjÕâe."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "ÁÐÔÐ ÜÞÖÕâÕ ãÝÕâØ ØÜÕ host-Ð ãÚÞÛØÚÞ jÕ ßÞâàÕÑÝÞ. ÃÚÞÛØÚÞ ÝØáâÕ áØÓãàÝØ "
-#~ "èâÐ ÔÐ ãÝÕáÕâÕ,\n"
-#~ "ØáßàÐÒÝÕ ØÝäÞàÜÐæØøÕ ûÕâÕ ßàÞÝÐûØ ÚÞÔ ÒÐèÕÓ ISP-a."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "ÁÐÔÐ ÜÞÖÕâÕ ßÞÔÕáØâØ ÜàeÖÝã ÚÐàâØæã:\n"
-#~ "\n"
-#~ " - IP ÐÔàÕáÐ: ãÚÞÛØÚÞ øÕ ÝÕ ×ÝÐâÕ, ÚÞÝâÐÚâØàÐøâÕ ÜàÕÖÝÞÓ ÐÔÜØÝØáâàÐâÞàÐ "
-#~ "ØÛØ ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ " - ¼àÕÖÝÐ ÜÐáÚÐ: \"255.255.255.0\" øÕ ÒÕûØÝÞÜ ÔÞÑÐà Ø×ÑÞà. ÃÚÞÛØÚÞ ÝØáâÕ\n"
-#~ "áØÓãàÝØ, ÚÞÝâÐÚâØàÐøâÕ ÜàÕÖÝÞÓ ÐÔÜØÝØáâàÐâÞàÐ ØÛØ ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ " - °ãâÞÜÐâáÚØ IP: ãÚÞÛØÚÞ ÒÐèÐ ÜàÕÖÐ ÚÞàØáâØ bootp ØÛØ dhcp ßàÞâÞÚÞÛÕ,\n"
-#~ "Ø×ÐÑÕàØâÕ ÞÒã ÞßæØøã. ÃÚÞÛØÚÞ øÕ áÕÛÕÚâÞÒÐÝÐ, ÝØøÕ ßÞâàÕÑÝÐ ÒàÕÔÝÞáâ ã\n"
-#~ "\"IP ÐÔàÕáÐ\". ÃÚÞÛØÚÞ ÝØáâÕ áØÓãàÝØ, ÚÞÝâÐÚâØàÐøâÕ ÜàÕÖÞÓ ÐÔÜØÝØáâàÐâÞàÐ "
-#~ "ØÛØ ISP."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "ÁÐÔÐ ÜÞÖÕâÕ ãÝÕâØ ØÜÕ host-Ð ãÚÞÛØÚÞ jÕ ßÞâàÕÑÝÞ. ÃÚÞÛØÚÞ ÝØáâÕ áØÓãàÝØ "
-#~ "èâÐ ÔÐ ãÝÕáÕâÕ,\n"
-#~ "áØÓãàÝØ ÚÞÝâÐÚâØàÐøâÕ ÒÐèÕÓ ÐÔÜØÝØáâàÐâÞàÐ."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "ÁÐÔÐ ÜÞÖÕâÕ ãÝÕâØ ØÜÕ host-Ð ãÚÞÛØÚÞ jÕ ßÞâàÕÑÝÞ.\n"
-#~ "ÃÚÞÛØÚÞ ÝØáâÕ áØÓãàÝØ èâÐ ÔÐ ãÝÕáÕâÕ, ÞáâÐØâÕ ßàÐ×ÝÞ."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "ÁÐÔÐ ãÝÞáØâÕ dialup ÞßæØøÕ. ÃÚÞÛØÚÞ ÝØáâÕ áØÓãàÝØ èâÐ ÔÐ ãÝÕáÕâÕ,\n"
-#~ "ØáßàÐÒÝÕ ØÝäÞàÜÐæØøÕ ûÕâÕ ßàÞÝÐûØ ÚÞÔ ÒÐèÕÓ ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "ÃÚÞÛØÚÞ ÚÞàØáâØâÕ ßàÞÚáØøÕ, ÚÞÝäØÓãàØèØâÕ Øå áÐÔÐ. ÃÚÞÛØÚÞ ÝÕ ×ÝÐâÕ\n"
-#~ "ÔÐ ÛØ ûÕâÕ Øå ÚÞàØáâØâØ, ÚÞÝáãÛâãøâÕ ÜàÕÖÞÓ ÐÔÜØÝØáâàÐâÞàÐ ØÛØ ISP."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "¼ÞÖÕâÕ ØÝáâÐÛØàÐâØ ÚàØßâÞÓàÐäáÚØ ßÐÚÕâ ãÚÞÛØÚÞ øÕ ØÝâÕàÝÕâ ÚÞÝÕÚæØøÐ\n"
-#~ "ßàÐÒØÛÝÞ ßÞÔÕèÕÝÐ. ¿àÒÞ Ø×ÐÑÕàØâÕ ßàÞáâÞà ÓÔÕ ûÕâÕ download-âØ ßÐÚÕâÕ\n"
-#~ "Ø ÝÐÚÞÝ âÞÓÐ Ø×ÐÑàÐâØ ßÐÚÕâÕ ÚÞøÕ ûÕâÕ ØÝáâÐÛØàÐâØ.\n"
-#~ "\n"
-#~ "\n"
-#~ "¼ÞàÐâÕ Ø×ÐÑàÐâØ mirror Ø ÚàØßâÞ ßÐÚÕâ\n"
-#~ "ÒÞÔÕûØ àÐçãÝÐ Þ ×ÐÚÞÝØÜÐ."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr ""
-#~ "ÁÐÔÐ ÜÞÖÕâÕ ßÞÔÕáØâØ ÒàÕÜÕÝáÚã ×ÞÝã ã ×ÐÒØáÝÞáâØ ÞÔ ÜÕáâÐ ÓÔÕ ÖØÒØâe"
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "¼ÞÖÕâÕ ßÞÔÕáØâØ ÛÞÚÐÛÝØ èâÐÜßaç (ÚÞjØ jÕ ßÞÒÕ×ÐÝ ÝÐ ÚÞÜßjãâÕà) ØÛØ "
-#~ "ãÔaùÕÝØ\n"
-#~ "èâÐÜßaç (ÚÞjÕÜ ÜÞÖÕâÕ ßàØáâãßØâØ ßàÕÚÞ Unix, Netware ØÛØ  Microsoft "
-#~ "Windows ÜàeÖe)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ØÜÐâÕ ÜÞÓãûÝÞáâ ÔÐ èâÐÜßaâÕ, ÜÞàÐâÕ ÔÐ Ø×ÐÑÕàÕâÕ áØáâÕÜ "
-#~ "×Ð èâÐÜßaúÕ Ø×Üeòã\n"
-#~ "CUPS ØÛØ LPR-a.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS jÕ ÝÞÒØ, ÜÞûÝØ Ø äÛÕÚáØÑØÛÝØ áØáâÕÜ ×Ð èâÐÜßaúÕ ×Ð Unix áØáâÕÜe "
-#~ "(CUPS\n"
-#~ "jÕ áÚàaûÕÝØæÐ ×Ð \"Common Unix Printing System\"). ¾Ý jÕ ßÞáâÐÒùÕÝ ×Ð "
-#~ "default áØáâÕÜ ×Ð èâÐÜßaúÕ ã\n"
-#~ "Mandrake Linux-ã.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR jÕ áâÐàØ áØáâÕÜ ×Ð èâÐÜßaúÕ ÚÞjØ áÕ ÚÞàØáâØÞ ã ßàÕâåÞÔÝØÜ Mandrake "
-#~ "Linux ÔØáâàØÑãæØjÐÜa.\n"
-#~ "\n"
-#~ "\n"
-#~ "ÃÚÞÛØÚÞ ÝÕÜÐâÕ èâÐÜßaç, ÚÛØÚÝØâÕ ÝÐ \"½ÕÜa\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux ÜÞÖÕ ÔÐ àÐÔØ áÐ ÒÕÛØÚØÜ ÑàÞjÕÜ èâÐÜßaça. ÁÒÐÚØ ÞÔ âØßÞÒÐ "
-#~ "èâÐÜßaçÐ ×ÐåâÕÒa\n"
-#~ "ÔàãÓaçØjÕ ßÞÔeèÐÒaúe.\n"
-#~ "\n"
-#~ "\n"
-#~ "ÃÚÞÛØÚÞ je Òaè èâÐÜßaç äØ×ØçÚØ ÒÕ×ÐÝ ×Ð ÚÞÜßjãâÕà, Ø×ÐÑÕàØâÕ ÞßæØjã  "
-#~ "\"»ÞÚÐÛÝØ\n"
-#~ "èâÐÜßaç\".\n"
-#~ "\n"
-#~ "\n"
-#~ "ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ßàØáâãßØâÕ èâÐÜßaçã ÚÞjØ áÕ ÝÐÛÐ×Ø ÝÐ ãÔaùÕÝÞj Unix "
-#~ "ÜaèØÝØ, Ø×ÐÑÕàØâe\n"
-#~ "\"ÃÔaùÕÝØ èâÐÜßaç\".\n"
-#~ "\n"
-#~ "\n"
-#~ "ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ßàØáâãßØâÕ èâÐÜßaçã ÚÞjØ áÕ ÝÐÛÐ×Ø ÝÐ ãÔaùÕÝÞj "
-#~ "Microsoft Windows ÜaèØÝØ\n"
-#~ "(ØÛØ ÝÐ Unix ÜaèØÝØ ÚÞàØáâeûØ SMB ßàÞâÞÚÞÛ), Ø×ÐÑÕàØâe \"SMB/Windows "
-#~ "95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "¼ÞÛØÜ ÒÐá ÔÐ ãßÐÛØâÕ èâÐÜßaç ßàÕ ÝÕÓÞ èâÞ ÝÐáâÐÒØâÕ ÔÐ ÑØ DrakX ÜÞÓÐÞ ÔÐ "
-#~ "ÓÐ ÔÕâÕÚâãje.\n"
-#~ "\n"
-#~ "¾ÒÔÕ ûÕâÕ ÜÞàÐâØ Ôa ãÝÕáâÕ ÝÕÚÕ ßÞÔÐâÚe.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ¸ÜÕ èâÐÜßaça: èâÐÜßaçÕÒ spooler ÚÞàØáâØ \"lp\" ÚÐÞ default ØÜÕ ×Ð "
-#~ "èâÐÜßaç. ´ÐÚÛe, ÜÞàÐâÕ ØÜÐâØ èâÐÜßaç ÚÞjØ áÕ ×ÞÒe \"lp\".\n"
-#~ "     ÃÚÞÛØÚÞ ØÜÐâÕ áÐÜÞ jÕÔÐÝ èâÐÜßaç, ÜÞÖÕâÕ ÚÞàØáâØâØ ÒØèÕ ØÜÕÝÐ ×Ð "
-#~ "úÕÓa. ÂàÕÑa áÐÜÞ ÔÐ  Øå ÞÔÒÞjØâÕ pipe\n"
-#~ "     ÚÐàÐÚâÕàÞÜ (âj. \"|\"). ´ÐÚÛe, ãÚÞÛØÚÞ ÒÞÛØâÕ ØÜÕ ÚÞjÕ ÝeèâÞ Ø "
-#~ "×ÝaçØ, ÜÞàÐâe ÔÐ ÓÐ ßÞáâÐÒØâÕ ÝÐ ßàÒÞ ÜÕáâÞ, ÝÐ ßàØÜÕà: \"MÞj èâÐÜßaç|lp"
-#~ "\".\n"
-#~ "     èâÐÜßaç ÚÞjØ ØÜa\"lp\" ã áÒÞÜ ØÜÕÝã(ÝØÜa) ûÕ ÑØâØ default èâÐÜßaç.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ¾ßØá: ÞÒÞ Ýije ÞÑÐÒÕ×ÝÐ äãÝÚæØjÐ ÐÛØ ÜÞÖe ÑØâØ ÚÞàØáÝÐ ãÚÞÛØÚÞ jÕ "
-#~ "ÒØèÕ èâÐÜßaçaßÞÒÕ×ÐÝÞ ÝÐ Òaè ÚÞÜßjãâÕà ØÛØ ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ÔÞ×ÒÞÛØâe "
-#~ "ßàØáâãß\n"
-#~ "     ÔàãÓØÜ ÚÞÜßjãâÕàØÜÐ ÝÐ ÞÒÐj èâÐÜßaç.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * »ÞÚÐæØja: ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐâÕ ÝÕÚÕ ØÝäÞàÜÐæØjÕ Þ ÛÞÚÐæØjØ ÒaèÕÓ\n"
-#~ "     èâÐÜßaça, ÞÝÔÐ âÞ ÜÞÖÕâÕ ÞÒÔÕ ãàÐÔØâØ (ÞÒÔÕ ÜÞÖÕâÕ ãßØáÐâØ ÑØÛÞ "
-#~ "èâa,\n"
-#~ "     ÝÐ ßàØÜÕà \"ÔàãÓØ áßàÐâ\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "¾ÒÔÕ ÜÞàÐâÕ ÔÐ ãÝÕáÕâÕ ÝÕÚÕ ØÝäÞàÜÐæØje.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ¸ÜÕ èâÐÜßaça: èâÐÜßaçÕÒ spooler ÚÞàØáâØ \"lp\" ÚÐÞ default ØÜe "
-#~ "èâÐÜßaça. ¿Ð âÐÚÞ ÜÞàÐâÕ ÔÐ ØÜÐâÕ èâÐÜßaç áÐ ØÜÕÝÞÜ \"lp\".\n"
-#~ "    ÃÚÞÛØÚÞ ØÐÜâÕ áÐÜÞ jÕÔÐÝ èâÐÜßaç, ÜÞÖÕâÕ ÔÐ Üã ÔÐâÕ ÒØèÕ ØÜÕÝa. ÁÐÜÞ "
-#~ "ØåÞÔÞÒÞjØâÕ pipe\n"
-#~ "    ÚÐàÐÚâÕàÞÜ (âj. \"|\"). ´ÐÚÛÕ, ãÚÞÛØÚÞ ÒØèÕ ÒÞÛØâÕ ØÜÐÝÕ áÐ ×ÝÐçeúÕÜ, "
-#~ "ÞÝÔÐ ÓÐ ÜÞàÐÕ áâÐÒØâØ ÝÐ ßàÒÞ ÜÕáâÞ, ÝÐ ßàØÜÕà: \"¼Þj èâÐÜßaç|lp\".\n"
-#~ "    èâÐÜßaç ÚÞjØ ØÜa\"lp\" ã áÒÞÜ ØÜÕÝã jÕ ãjÕÔÝÞ Ø default èâÐÜßaç.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool ÔØàÕÚâÞàØjãÜ: âÞ jÕ ÔØàÕÚâÞàØjãÜ ã ÚÞjÕÜ áÕ ÝÐÛÐ×Õ ×ÐÔÐâØ "
-#~ "ßÞáÛÞÒØ ×Ð èâÐÜßaúe. ·ÐÔàÖØâÕ default Ø×ÑÞà\n"
-#~ "     ãÚÞÛØÚÞ ÝÕ ×ÝÐâÕ èâÐ ÔÐ ÚÞàØáâØâe\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ºÞÝÕÚâÞÒaúÕ èâÐÜßaça: ÃÚÞÛØÚÞ jÕ èâÐÜßaç äØ×ØçÚØ ÒÕ×ÐÝ ×Ð ÚÞÜßjãâÕà, "
-#~ "Ø×ÐÑÕàØâe \"»ÞÚÐÛÝØ èâÐÜßaç\".\n"
-#~ "     ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ßàØáâãßØâÕ èâÐÜßaçã ÚÞjÕ ÛÞæØàÐÝ ÝÐ ãÔaùÕÝÞj Unix "
-#~ "ÜaèØÝØ, Ø×ÐÑÕàØâe \"ÃÔaùÕÝØ lpd èâÐÜßaç\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ßàØáâãßØâÕ èâÐÜßaçã ÚÞjÕ ÛÞæØàÐÝ ÝÐ ãÔaùÕÝÞj "
-#~ "Microsoft Windows  ÜaèØÝØ (ØÛØ Ýa Unix ÜaèØÝØ ÚÞàØáâeûØ SMB\n"
-#~ "     ßàÞâÞÚÞÛ), Ø×ÐÑÕàØâe \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ßàØáâãßØâÕ èâÐÜßaçã ÚÞjÕ ÛÞæØàÐÝ ÝÐ NetWare ÜàeÖØ, "
-#~ "Ø×ÐÑÕàØâe\"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "²aè èâÐÜßaç ÝØjÕ ÔÕâÕÚâÞÒÐÝ. ÃÝÕáØâÕ ØÜÕ ãàeòÐjÐ/ßÞàâa Ýa\n"
-#~ "ÚÞjØ jÕ ßàØÚùãçÕÝ.\n"
-#~ "\n"
-#~ "\n"
-#~ "·Ð Òaèã ØÝäÞàÜÐæØjã, ÒeûØÝÐ èâÐÜßaçÐ jÕ ßÞÒÕ×ÐÝÐ ÝÐ ßàÒØ ßÐàÐÛÕÛÝØ ßÞàâ. "
-#~ "° âÐj ßÞàâ\n"
-#~ "áÕ ÝÐ×ØÒa \"/dev/lp0\" ßÞÔ GNU/Linux-ÞÜ Ø  \"LPT1\" ßÞÔ  Microsoft "
-#~ "Windows-ÞÜ."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "ÁÐÔÐ ÜÞàÐâÕ Ø×ÐÑàÐâØ Òaè èâÐÜßaç áÐ ÓÞàúÕ ÛØáâe"
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "¼ÞÛØÜ ÒÐá Ø×ÐÑÕàØâÕ ßàÐÒÕ ÞßæØjÕ ÚÞjÕ áã ã áÚÛÐÔã áÐ ÒaèØÜ èâÐÜßaçÕÜ.\n"
-#~ "¿ÞÓÛÕÔÐjâÕ Ø ÔÞÚãÜÕÝâÐæØjã ÚÞjã  áâÕ ÔÞÑØÛØ ã× èâÐÜßaç ãÚÞÛØÚÞ ÝÕ ×ÝÐâe "
-#~ "èâÐ âÞ ÞÒÔÕ ÑØàÐâe.\n"
-#~ "\n"
-#~ "\n"
-#~ "¼ÞûØ ûÕâÕ ÔÐ âÕáâØàÐâÕ áÒÞjã ÚÞÝäØÓãàÐæØjã ã áÛÕÔeûÕÜ ÚÞàÐÚã Ø ÜÞûØ ûÕâÕ "
-#~ "ÔÐ ÜeúÐâeÜÞûØ ûÕâÕ ÔÐ jÕ ÜeúÐâe ãÚÞÛØÚÞ ÝÕàÐÔâØ ÚÐÚÞ ÒØ ÖÕÛØâe."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "ÁÐÔa, ÜÞÖÕâe ãÝÕâØ  root ÛÞ×ØÝÚã ×Ð Òaè Mandrake Linux áØáâÕÜ.\n"
-#~ "»Þ×ØÝÚÐ ÜÞàÐ ÑØâØ ãÝÕâÐ ÔÒÐ ßãâÐ àÐÔØ ÒÕàØäØÚÐæØjÕ ÔÐ áã ÞÑÐ ãÝÞáÐ\n"
-#~ "ÛÞ×ØÝÚØ Øáâa.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root øÕ ÐÔÜØÝØáâàÐâÞà áØáâÕÜÐ, Ø øÕÔÝØ ÚÞàØáÝØÚÚÞøØ\n"
-#~ "ÜÞÖÕ ÔÐ ÜÞÔØäØÚãøÕ áØáâÕÜáÚÕ ÞßæØøÕ. ·ÑÞÓ âÞÓÐ,\n"
-#~ "ÑØàÐøâÕ ÛÞ×ØÝÚã ßÐÖùØÒÞ! ½ÕÔÞ×ÒÞùÕÝØ ßàØáâãß ÝÐ root àÐçãÝ ÜÞÖÕÑØâØ ÒÕÞÜÐ "
-#~ "ÞßÐáÐÝ\n"
-#~ "×Ð ÑÕ×ÑÕÔÝÞáâ áØáâÕÜÐ Ø ßÞÔÐâÐÚÐ, ÚÐÞ Ø ÔàãÓØå ßÞÒÕ×ÐÝØå áØáâÕÜÐ.\n"
-#~ "\n"
-#~ "\n"
-#~ "»Þ×ØÝÚÐ âàÕÑÐ ÔÐ ÜÕèÐÒØÝÐ ÐÛäÐÝãÜÕàØçÚØå\n"
-#~ "ÚÐàÐÚâÕàÐ Ø ÝÐøÜÐúÕ 8 ÚÐàÐÚâÕàÐ ÔãÓÐçÚÐ.\n"
-#~ "\n"
-#~ "\n"
-#~ "*½ØÚÐÔÐ* øÕ ÝÕ ×ÐßØáãøâÕ ÝÐ ßÐßØà. ½Õ ßàÐÒØâÕ ÛÞ×ØÝÚã ßàÕÒØèÕÔãÓÞÜ\n"
-#~ "Ø ÚÞÜßÛØÚÞÒÐÝÞÜ, øÕà øÕ ÜÞàÐâÕ ãßÐÜâØâØ ÑÕ× ÜÝÞÓÞ ÝÐßÞàÐ."
-
-#~ msgid ""
-#~ "If your network uses LDAP (or NIS) protocol for authentication, select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "ÃÚÞÛØÚÞ ÒÐèÐ ÜàÕÖÐ ÚÞàØáâØ LDAP (ØÛØ NIS) ßàÞâÞÚÞÛ ×Ð ØÔÕÝâØäØÚÐæØøã, "
-#~ "Ø×ÐÑÕàØâÕ\n"
-#~ "\"LDAP\" (ØÛØ \"NIS\") ÚÐÞ ØÔÕÝâØäØÚÐæØøã. ÃÚÞÛØÚÞ ÝÕ ×ÝÐâÕ, ßØâÐøâÕ "
-#~ "ÒÐèÕÓ ÜàÕÖÝÞÓ\n"
-#~ "ÐÔÜØÝØáâàÐâÞàÐ.\n"
-#~ "\n"
-#~ "ÃÚÞÛØÚÞ ÒÐè ÚÞÜßøãâÕà ÝØøÕ ßÞ×ÒÕ×ÐÝ ÝØ ÝÐ øÕÔÝã ÐÔÜØÝØáâàØàÐÝã ÜàÕÖã, "
-#~ "ÜÞÖÔÐ ÖÕÛØâÕ ÔÐ\n"
-#~ "Ø×ÐÑÕàÕâÕ \"»ÞÚÐÛÝÕ ÔÐâÞâÕÚÕ\" ×Ð ØÔÕÝâØäØÚÐæØøã."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "ÁÐÔÐ ÜÞÖÕâÕ ÚàÕØàÐâØ øÕÔÐÝ ØÛØ ÒØèÕ ÞÑØçÝØå \"regular\" ÚÞàØáÝØçÚØå\n"
-#~ "àÐçãÝÐ, ÝÐáãßàÞâ ßàØÒØÛÕÓÞÒÐÝÞÜ \"privileged\" ÚÞàØáÝØçÚÞÜ àÐçãÝã, root.\n"
-#~ "¼ÞÖÕâÕ ÚàÕØàÐâØ øÕÔÐÝ ØÛØ ÒØèÕ àÐçãÝÐ ×Ð áÒÐÚã ÞáÞÑã ÚÞï ÖÕÛØ ÚÞàØáâØâØ\n"
-#~ "àÐçãÝÐà. ½ÕÜÐ ÛØÜØâÐ. ÁÒÐÚØ ÚÞàØáÝØÚ ûÕ ØÜÐâØ áÞßáâÒÕÝÞ ßÞÔÕèÕÝÕ "
-#~ "ßÐàÐÜÕâàÕ\n"
-#~ "(ÓàÐäØçÚÞ ÞÚàãÖÕúÕ, ÚÐÞ Ø áÒÞø home ÔØàÕÚâÞàØøãÜ \"¾áÝÞÒÝÐ ÔØàÕÚâÞàØøãÜ"
-#~ "\",\n"
-#~ "ã ÚÞøÕÜ áÕ ÞÒØ ßÐàÐÜÕâàØ Ø ÝÐÛÐ×Õ.\n"
-#~ "\n"
-#~ "\n"
-#~ "¿àÕ áÒÕÓÐ, ÝÐßàÐÒØâÕ àÐçãÝ ×Ð ÒÐè áÐÜÕ! ÇÐÚ Ø ãÚÞÛØÚÞ ûÕâÕ ÑØâØ øÕÔØÝØ\n"
-#~ "ÚÞàØáÝØÚ ÝÐ àÐçãÝÐàã, ½µ âàÕÑÐ ÔÐ áÕ ÚÞÝÕÚâãøÕâÕ ÚÐÞ root ×Ð áÒÐÚÞÔÝÕÒÝã\n"
-#~ "ãßÞâàÕÑã áØáâÕÜÐ: âÞ øÕ ÒÕÞÜÐ ÒÕÛØÚØ áØÓãàÝÞáÝØ àØ×ØÚ. ¼ÞÖÕâÕ áØáâÕÜ\n"
-#~ "ãçØÝØâØ ÝÕáâÐÑØÛÝØÜ ØÛØ ÓÐ çÐÚ ÞÝÕáßÞáÞÑØâØ èâÞ øÕ çÕáâÐ ßÞøÐÒÐ !\n"
-#~ "·ÑÞÓ âÞÓÐ, ÂÀµ±° ÔÐ áÕ ÚÞÝÕÚâãøÕâÕ ÚÞàØáâÕûØ ÞÑØçÐÝ ÚÞàØáÝØk . ÀÐçãÝ "
-#~ "ÚÞøØ\n"
-#~ "ûÕâÕ ÚàÕØàÐâØ ÞÒÔÕ, Ð root àÐçãÝ ÚÞàØáâØâØ Á°¼¾ ßàØ ÐÔÜØÝØáâàØàÐúã ØÛØ\n"
-#~ "ÞÔàÖÐÒÐúã áØáâÕÜÐ."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "ºàÕØàaúÕ áâÐàâÝÕ(boot) ÔØáÚÕâÕ jÕ ÒàÛÞ ßàÕßÞàãçùØÒÞ. ÃÚÞÛØÚÞ ÝÕ ÜÞÖÕâÕ "
-#~ "Ôa\n"
-#~ "áâÐàâãjÕâÕ ÚÞÜßjãâÕà, âÞ jÕ jÕÔØÝØ ÝaçØÝ ÔÐ áßÐáØâÕ áØáâÕÜ ÞÔ\n"
-#~ "àÕØÝáâÐÛÐæØje."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "GÛÐÒÝÕ ÞßæØøÕ ×Ð LILO Ø grub áã:\n"
-#~ "  - Boot ãàÕòÐø: ¿ÞÔÕèÐÒÐ ØÜÕ ãàÕòÐøÐ (Ýßà. åÐàÔ ÔØáÚ ßÐàâØæØje)\n"
-#~ "ÚÞøØ áÐÔàÖØ boot áÕÚâÞà. ÃÚÞÛØÚÞ ÔàãÓÐçØøÕ ÝØøÕ ÞÔàÕòÕÝÞ,\n"
-#~ "Ø×ÐÑÕàØâÕ \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¿Ðã×Ð ßàÕ áâÐàâaúa default image-a: ÁßÕæØäØæØàÐ ÑàÞj ã ÔÕáÕâØÜ "
-#~ "ÔÕÛÞÒØÜa\n"
-#~ "áÕÚãÝÔe ×Ð ÚÞjØ áâÐàâÕà âàÕÑÐ ÔÐ çÕÚÐ ßàe áâÐàâaúa ßàÒÞÓ image-a.\n"
-#~ "¾ÒÞ jÕ ÚÞàØáÝÞ ÝÐ áØáâÕÜØÜÐ ÚÞjØ ÞÔÜÐå áâÐàâÐjã áÐ åÐàÔ ÔØáÚa ßÞáÛe\n"
-#~ "ÔÕâÕÚæØjÕ âÐáâÐãàe. ÁâÐàâÕà ÝÕ çÕÚÐ ãÚÞÛØÚÞ jÕ  \"delay\" \n"
-#~ "ßàÐ×ÝÞ ØÛØ ßÞÔeèÕÝÞ ÝÐ 0 - ÝãÛa .\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ²ØÔÕÞ ÜÞÔ: ¾ÒÐø ÜÞÔ ßÞÔÕèÐÒÐ VGA âÕÚáâ ÜÞÔ ÚÞøØ áÕ ÑØàÐ ßàØ\n"
-#~ "áâÐàâaúã. ¼ÞÓãûÕ áã áÛÕÔÕûÕ ÒàÕÔÝÞáâØ: \n"
-#~ "\n"
-#~ "    * ÝÞàÜÐÛÝÞ: ÚÞàØáâØ ÝÞàÜÐÛÝØ 80x25 âÕÚáâ ÜÞÔ.\n"
-#~ "\n"
-#~ "    * <ÑàÞj>: ÚÞàØáâØ ÚÞàÕáßÞÝÔÕÝâÝØ âÕÚáâ ÜÞÔ.\n"
-#~ "\n"
-#~ "  - ¾çØáâØ \"/tmp\" ßàØ áÒÐÚÞÜ áâÐàâaúã : ãÚÞÛØÚÞ ÖÕÛØâÕ Ôa ãÚÛÞÝØâÕ áÒÕ "
-#~ "ÔÐâÞâÕÚe Ø ÔØàÕÚâÞàØjãÜe\n"
-#~ "ÚÞjØ sáÕ ÝÐÛÐ×Õ ã \"/tmp\" ÚÐÔÐ áâÐàâãjÕ áØáâÕÜ, áÕÛÕÚâãjâÕ ÞÒã ÞßæØjã.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ´ÕäØÝØèØâÕ RAM ãÚÞÛØÚÞ jÕ ßÞâàÕÑÝÞ: ÝÐ ÖÐÛÞáâ, ÝÕ ßÞáâÞjØ áâÐÝÔÐàÔÝØ "
-#~ "ÜÕâÞÔ  ãßØâ\n"
-#~ "BIOS-ã Þ ÒÕÛØçØÝØ RAM ßàØáãâÝÞÓ ã ÒaèÕÜ ÚÞÜßjãâÕàã. ºÐÞ ßÞáÛÕÔØæÐ âÞÓa, "
-#~ "Linux ÜÞÖe\n"
-#~ "fßÞÓàeèÝÞ ÔÕâÕÚâÞÒÐâØ ÒÕÛØçØÝã RAM ÜÕÜÞàØje. ÃÚÞÛØÚÞ áÕ âÞ ÔÕáØ, ÜÞÖeâe\n"
-#~ "ÞÒÔÕ áÐÜØ ãÝÕâØ ßàÐÒã ÒÕÛØçØÝã RAMa. ·ÐßÐÜâØâÕ ÔÐ àÐ×ÛØÚÐ ã  2 ØÛØ 4\n"
-#~ "MB Ø×Üeòã ÔÕâÕÚâÞÒÐÝÕ Ø áâÒÐàÝÕ ÒÕÛØçØÝÕ RAMa ã áØáâÕÜã ÙÕáâÕ ÝÞàÜÐÛÝÐ "
-#~ "áâÒÐà."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO je áâÐàâÕà ×Ð SPARC: ÞÝ ÜÞÖÕ ÔÐ áâÐàâa\n"
-#~ "ØÛØ »ØÝãÚá ØÛØ ÑØÛÞ ÚÞjØ  ÔàãÓØ  ÞßÕàÐâØÒÝØ áØáâÕÜ ßàØáãâÐÝ ÝÐ ÒaèÕÜ "
-#~ "ÚÞÜßjãâÕàã.\n"
-#~ "½ÐàÐÒÝÞ, ÞÒØ ÔàãÓØ ÞßÕàÐâ.áØáâÕÜØ áã ØáßàÐÒÝÞ ÔÕâÕÚâÞÒÐÝØ Ø "
-#~ "ØÝáâÐÛØàÐÝØ. \n"
-#~ "ÃÚÞÛØÚÞ âÞ ÝØjÕ âÐÚÞ,ÜÞÖÕâÕ âÞ áÐÜØ ãàÕÔØâØ ÞÒÔe.¿Ð×ØâÕ ÚÐÔÐ ãÝÞáØâÕ "
-#~ "ßÐàÐÜeâàe\n"
-#~ "\n"
-#~ "\n"
-#~ "ÂÐÚÞòe,ÜÞÖeâe ÖÕÛÕâØ ÔÐ ÞáâÐÛØÜ ÞßÕàÐâ.áØáâÕÜØÜÐ ÞÝeÜÞÓãûØâÕ ÔÐ ßàØáâãßÕ "
-#~ "ÔàãÓØ \n"
-#~ "à âÞÜ áÛãçÐjã, âàÕÑÐ ÔÐ Ø×ÑàØèÕâÕ ÞÔÓÞÒÐàÐjãûe ÛØÝØje ×Ð âÕ áØáâÕÜe. °ÛØ\n"
-#~ "ÞÝÔa ÜÞàÐâÕ ØÜÐâØ boot ÔØáÚÕâÕ ÔÐ ÑØ Øå áâÐàâÐÛØ !"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SIL¾ ÓÛÐÒÝÕ ÞßæØøÕ áã:\n"
-#~ "  - ¸ÝáâÐÛÐæØjÐ áâÐàâÕàa: ÝÐ×ÝaçØâÕ ÓÔÕ ÖÕÛØâÕ ÔÐ áÜÕáâØâÕ ØÝäÞàÜÐæØje\n"
-#~ "ßÞâàÕÑÝÕ ×Ð áâÐàâaúÕ »ØÝãÚáa.ÃÚÞÛØÚÞ ÝÕ ×ÝÐâÕ âaçÝÞ èâÐ àÐÔØâe,\n"
-#~ "Ø×ÐÑÕàØâÕ \"¿àÒØ áÕÚâÞà åÐàÔ ÔØáÚa (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¿Ðã×Ð ßàÕ áâÐàâaúa default image-a: ÁßÕæØäØæØàÐ ÑàÞj ã ÔÕáÕâØÜ "
-#~ "ÔÕÛÞÒØÜa\n"
-#~ "áÕÚãÝÔe ×Ð ÚÞjØ áâÐàâÕà âàÕÑÐ ÔÐ çÕÚÐ ßàe áâÐàâaúa ßàÒÞÓ image-a.\n"
-#~ "¾ÒÞ jÕ ÚÞàØáÝÞ ÝÐ áØáâÕÜØÜÐ ÚÞjØ ÞÔÜÐå áâÐàâÐjã áÐ åÐàÔ ÔØáÚa ßÞáÛe\n"
-#~ "ÔÕâÕÚæØjÕ âÐáâÐãàe. ÁâÐàâÕà ÝÕ çÕÚÐ ãÚÞÛØÚÞ jÕ  \"delay\" \n"
-#~ "ßàÐ×ÝÞ ØÛØ ßÞÔeèÕÝÞ ÝÐ 0 - ÝãÛa ."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "ÁÐÔÐ øÕ ÔÞèÛÞ ÒàÕÜÕ ÔÐ ßÞÔÕáØÜÞ X Window áØáâÕÜ, ÚÞøØ øÕ\n"
-#~ "øÕ×ÓàÞ Linux GUI-Ð (»ØÝãÚá ³àÐäØçÚÞ ºÞàØáÝØçÚÞ ¾ÚàãÖÕúÕ). à âã áÒàåã,\n"
-#~ "ÜÞàÐâÕ ÚÞÝäØÓãàØáÐâØ ÒÐèã ÒØÔÕÞ ÚÐàâã Ø ÜÞÝØâÞà. ²ÕûØÝÞÜ\n"
-#~ "áã ÞÒØ ßÞáâãßæØ ÐãâÞÜÐâØ×ÞÒÐÝØ, âÐÚÞ ÔÐ áÕ ÒÐè ßÞáÐÞ ÜÞÖÕ\n"
-#~ "áÒÕáâØ ÝÐ ßÞâÒàòØÒÐúÕ ÞÝÞÓ èâÞ øÕ ãàÐòÕÝÞ Ø ßàØåÒÐâÐúÕ\n"
-#~ "ßÞÔÕèÕÝØå ÞßæØøÐ :-)\n"
-#~ "\n"
-#~ "\n"
-#~ "ºÐÔÐ ÚÞÝäØÓãàÐæØøÐ ÑãÔÕ ×ÐÒàèÕÝÐ, X-ÞÒØ ûÕ áÕ ßÞÔØûØ (ÞáØÜ ÐÚÞ\n"
-#~ "ÚÐÖÕâÕ DrakX-ã ÔÐ âÞ ÝÕ àÐÔØ!) âÐÚÞ ÔÐ ÜÞÖÕâÕ ØáßàÞÑÐâØ ÔÐ ÛØ øÕ\n"
-#~ "áÒÕ ßÞÔÕèÕÝÞ ÚÐÚÞ ÒÐùÐ. °ÚÞ áÕ ÝÕ ßÞÔØÓÝã, ÒàÐâØâÕ áÕ ÚÞàÐÚ ÝÐ×ÐÔ\n"
-#~ "Ø ßàÞÜÕÝØâÕ ßÞÔÕèÐÒÐúÕ ÚÞÛØÚÞ ÓÞÔ ßãâÐ øÕ ßÞâàÕÑÝÞ."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "ÃÚÞÛØÚÞ øÕ ÝÕèâÞ ßÞÓàÕèÝÞ ã X ÚÞÝäØÓãàÐæØøØ, ÚÞàØáâØâÕ ÞÒÕ ÞßæØøÕ\n"
-#~ "ÔÐ ÑØ ØáßàÐÒÝÞ ßÞÔÕÕáØÛØ X Window áØáâÕÜ."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "ÃÚÞÛØÚÞ ÒØèÕ ÒÞÛØâÕ ÛÞÓÞÒÐúÕ ã ÓàÐäØçÚÞÜ ÜÞÔã, Ø×ÐÑÕàØâÕ \"´Ð\".\n"
-#~ "à áãßàÞâÝÞÜ Ø×ÐÑÕàØâÕ \"½Õ\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "¼ÞÖÕâÕ Ø×ÐÑàÐâØ áØÓãàÝÞáÝØ ÝØÒÞ ×Ð Òaè áØáâÕÜ. ¿ÞÓÛÕÔÐjâÕ ãßãáâÒÞ ×Ð "
-#~ "ÒØèe\n"
-#~ "  ØÝäÞàÜÐæØja. à ÞáÝÞÒØ, ãÚÞÛØÚÞ ÝÕ ×ÝÐâÕ èâÐ ÔÐ ÞÔÐÑÕàÕâee, ÞáâÐÒØâe "
-#~ "default ÞßæØjã.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "ÁØáâÕÜ ûÕ áÕ àÕáÕâÞÒÐâØ.\n"
-#~ "\n"
-#~ "¿ÞáÛÕ àÕáÕâÞÒÐúÐ, ÒÐè ÝÞÒØ Mandrake Linux áØáâÕÜ ûÕ áÕ ßÞÔØûØ "
-#~ "ÐãâÞÜÐâáÚØ.\n"
-#~ "ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ßÞÔØÓÝÕâÕ ÝÕÚØ ÔàãÓØ ØÝáâÐÛØàÐÝØ ÞßÕàÐâØÒÝØ áØáâÕÜ,\n"
-#~ "ßàÞçØâÐâÕ ãßãáâÒÞ ØÛØ ßÞáÕâØâÕ ÝÕÚØ ÞÔ Linux chat ÚÐÝÐÛÐ."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "ÇÕèÚØ (¿àÞÓàÐÜÕàØ)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "ÁÛÞÒÐçÚØ (¿àÞÓàÐÜÕàáÚØ)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "¸ÜÕ ßàÞäØÛÐ ÚÞjØ áÕ ÚàÕØàÐ:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "¸áßØèØ /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "¿ÞÒàÐâØ (restore) Ø× ÔÐâÞâÕÚe"
-
-#~ msgid "Save in file"
-#~ msgstr "ÁÝØÜØ ã ÔÐâÞâÕÚã"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "¿ÞÒàÐâØ (restore) áÐ ÔØáÚÕâÕ"
-
-#~ msgid "Format all"
-#~ msgstr "ÄÞàÜÐâØàÐø áÒÕ"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "¿ÞáÛÕ äÞàÜÐâØàÐúÐ áÒØå ßÐàâØæØøÐ,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "áÒØ ßÞÔÐæØ ÝÐ úØÜÐ ûÕ ÑØâØ ãÝØèâÕÝØ"
-
-#~ msgid "Reload"
-#~ msgstr "¿ÞÝÞÒÞ ãÝÕáØ"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "´a ÛØ ÖÕÛØâÕ ÔÐ ÚàÕØàÐâÕ ÐãâÞØÝáâÐÛÐæØÞÝØ äÛÞßØ ×Ð àÕßÛØÚÐæØjã ÛØÝãÚáÐ ?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL ÚÞÝäØÓãàÐæØøa"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "ÁÐ ãÔaùÕÝØÜ CUPS áÕàÒÕàÞÜ, ÝÕ ÜÞàÐâÕ ÔÐ ÚÞäØÓãàØèÕâe\n"
-#~ "ÞÒÔÕ ÝØ jÕÔÐÝ èâÐÜßaç; èâÐÜßaçØ ûÕ ÑØâØ ÐãâÞÜÐâáÚØ ÔÕâÕÚâÞÒÐÝØ.\n"
-#~ "ÞáØÜ ÐÚÞ ØÜÐâÕ áÕàÒÕà ÝÐ ÔàãÓÞj ÜàeÖØ; ÐÚÞ jÕ âÞ\n"
-#~ "áÛãçÐj, ÜÞàÐâÕ ÔÐâØ IP ÐÔàÕáã  CUPS áÕàÒÕàa\n"
-#~ "Ð ÞßæØÞÝÞ Ø ÑàÞj ßÞàâa."
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "ÃÝÕáØâÕ ¸ÜÕ èâÐÜßÐçÐ Ø ºÞÜÕÝâÐàÕ"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "½ÕÔÞáâÐøÕ ØÜÕ ×Ð ãÔÐùÕÝØ àÕÔ!"
-
-#~ msgid "Pipe into command"
-#~ msgstr "ÃÑÐæØ ã ÚÞÜÐÝÔã"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "¾ÒÔÕ ÜÞÖÕâÕ ÞÔàÕÔØâØ ÑØÛÞ ÚÞøã ÚÞÜÐÝÔÝã ÛØÝØøã ÝÐ ÚÞøã ÑØ èâÐÜßÐç ßÞáÛÐÞ "
-#~ "×ÐÔÐâÐÚ ãÜÕáâÞ ÔÐ ÓÐ ßÞèÐùÕ ÔØàÕÚâÝÞ ÝÐ èâÐÜßã."
-
-#~ msgid "Command line"
-#~ msgstr "ºÞÜÐÝÔÝÐ ÛØÝØøÐ"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "ºÞÜÐÝÔÝÐ ÛØÝØøÐ ÜÞàÐ ÑØâØ ãÝÕèÕÝÐ!"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "¼ÞÝØâÞàØÝÓ ÜàÕÖe"
-
-#~ msgid "Settings"
-#~ msgstr "¾ßæØøÕ"
-
-#~ msgid "Profile "
-#~ msgstr "¿àÞäØÛ "
-
-#~ msgid "Statistics"
-#~ msgstr "ÁâÐâØáâØÚe"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "±à×ØÝÐ áÛaúÐ ßÞÔÐâÐÚÐ:"
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "±à×ØÝÐ ßàØÜaúÐ ßÞÔÐâÐÚÐ:"
-
-#~ msgid "Connection Time: "
-#~ msgstr "²àÕÜÕ ÚÞÝÕÚæØøÕ: "
-
-#~ msgid "Logs"
-#~ msgstr "»ÞÓÞÒØ"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "ºÞÝÕÚâãjÕÜ ÝÐ ¸ÝâÕàÝÕâ "
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "´ØáÚÞÝÕÚâãjÕÜ áÐ ¸ÝâÕàÝÕâa"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "´ØáÚÞÝÕÚæØja áÐ ¸ÝâÕàÝÕâa ÝÕãáßÕÛÐ."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "´ØáÚÞÝÕÚÕÚæØjÐ áÐ ¸ÝâÕàÝÕâa ×ÐÒàèÕÝÐ."
-
-#~ msgid "Connection complete."
-#~ msgstr "ºÞÝÕÚæØøa ×ÐÒàèÕÝÐ."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "ºÞÝÕÚæØøa ÝÕãáßÕÛÐ.\n"
-#~ "¿àÞÒÕàØâÕ áÒÞjã ÚÞÝäØÓãàÐæØjã ã Mandrake ºÞÝâàÞÛÞÝÞÜ ÆÕÝâàã."
-
-#~ msgid "Color configuration"
-#~ msgstr "ºÞÝäØÓãàÐæØøa ÑÞøÕ"
-
-#~ msgid "sent: "
-#~ msgstr "ßÞáÛÐâÞ:"
-
-#~ msgid "received: "
-#~ msgstr "ßàØÜùÕÝÞ: "
-
-#~ msgid "average"
-#~ msgstr "ßàÞáÕçÝÞ"
-
-#~ msgid "Connect"
-#~ msgstr "ºÞÝÕÚâãj"
-
-#~ msgid "Disconnect"
-#~ msgstr "´ØáÚÞÝÕÚâãj"
-
-#~ msgid "/File/_New"
-#~ msgstr "/_´ÐâÞâÕÚa/_½ÞÒa"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>N"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/´ÐâÞâÕÚa/_¾âÒÞàØ"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>O"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/´ÐâÞâÕÚa/_ÁaçãÒÐj"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/´ÐâÞâÕÚa/ÁaçãÒÐj_ºÐÞ"
-
-#~ msgid "/File/-"
-#~ msgstr "/´ÐâÞâÕÚa/-"
-
-#~ msgid "/_Options"
-#~ msgstr "/_¾ßæØje"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/¾ßæØje/ÂÕáâ"
-
-#~ msgid "/_Help"
-#~ msgstr "_¿ÞÜÞû"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/¿ÞÜÞû/_¾..."
-
-#~ msgid "Default Runlevel"
-#~ msgstr "¿ÞÔàÐ×ãÜÕÒÐÝØ Runlevel"
-
-#~ msgid "Europe"
-#~ msgstr "µÒàÞßÐ"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "ÃÚÛÞÝØ queue"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "ºÞÝäØÓãàÐæØÞÝØ äÐjÛ ÝØjÕ ÜÞÓãûÕ ØÝâÕàßàÕâØàÐâØ"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "½ÕßÞ×ÝÐâÐ ÚÞÝäØÓãàÐæØÞÝÐ ÔÐâÞâÕÚa"
-
-#~ msgid "Adapter"
-#~ msgstr "°ÔÐßâÕà"
-
-#~ msgid "Disable network"
-#~ msgstr "ØáÚùãçØ  ÜàÕÖã"
-
-#~ msgid "Enable network"
-#~ msgstr "ÃÚùãçØ ÜàÕÖã"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "ÁÐÔÐ ÜÞÖÕâÕ ÔÐ âÕáâØàÐâÕ ÜØèÐ. ¿àØâØáÚÐjâÕ âÐáâÕàÕ Ø ßÞÚàÕÝØâÕ âÞçÚØû ÔÐ "
-#~ "ÑØ ßÞâÒàÔØÛØ\n"
-#~ "ÔÐ ÛØ áã ßÞáâÐÒÚÕ ÔÞÑàÕ. ÃÚÞÛØÚÞ ÝØáã, ÚÛØÚÝØâÕ ÝÐ \"¿ÞÝØèâØ\" Ôa ÑØ "
-#~ "Ø×ÐÑàÐÛØ ÔàãÓØ\n"
-#~ "ÔàÐjÒÕà."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (ØÛØ ADSL) ÚÞÝÕÚæØja"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "·ÐâÒÞàØ"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "¼ÞÖÕâÕ ÔÐ ÞÔàÕÔØâÕ URI ÔØàÕÚâÝÞ àÐÔØ ßàØáâãßÐ èâÐÜßÐçã áÐ CUPS-a"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "´Ð, ØèâÐÜßÐø ASCII âÕáâ áâàÐÝØæã"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "´Ð, ØèâÐÜßÐø PostScript âÕáâ áâàÐÝØæã"
-
-#~ msgid "Yes, print both test pages"
-#~ msgstr "´Ð, ØèâÐÜßÐø ÞÑÕ âÕáâ áâàÐÝØæÕ"
-
-#~ msgid "Paper Size"
-#~ msgstr "²ÕÛØçØÝÐ ßÐßØàÐ"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "¸×ÑÐæØ ßÐßØà ÝÐÚÞÝ èâÐÜßaúÐ ?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint  ÔàÐøÒÕà -ÞßæØøÕ"
-
-#~ msgid "Color depth options"
-#~ msgstr "¾ßæØjÐ - ±àÞø ÑÞøÐ"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "èâÐÜßÐj âÕÚáâ ÚÐÞ PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "¿ÞßàÐÒØâØ  'ÕäÕÚaâ áâÕßÕÝØæÐ' ã âÕÚáâã?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "±àÞj áâàÐÝØæÐ ßÞ Ø×ÛÐ×ÝØÜ áâàÐÝØæÐÜa"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "´ÕáÝÐ/ÛÕÒÐ ÜÐàÓØÝÐ ã âaçÚÐÜa (1/72 ÔÕÞ ØÝça)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "²àå/ÔÝÞ ÜÐàÓØÝÐ ã âaçÚÐÜa (1/72 ÔÕÞ ØÝça)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "´ÞÔÐâÝÕ GhostScript ÞßæØje"
-
-#~ msgid "Extra Text options"
-#~ msgstr "´ÞÔÐâÝe ÂÕÚáâ ÞßæØje"
-
-#~ msgid "Reverse page order"
-#~ msgstr "¾ÑàÝãâ àÕÔÞáÛÕÔ áâàÐÝØæa"
-
-#~ msgid "CUPS starting"
-#~ msgstr "¿ÞÚàÕûÕÜ CUPS.."
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "¸×aÑÕàØ  ÚÞÝÕÚæØjã ãÔaùÕÝØå èâÐÜßÐçÐ"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected.\n"
-#~ "In case of doubt, select \"Remote CUPS server\"."
-#~ msgstr ""
-#~ "ÁÐ ãÔaùÕÝØÜ CUPS áÕàÒÕàÞÜ, ÝÕ ÜÞàÐâÕ ÔÐ ÚÞäØÓãàØèÕâe\n"
-#~ "ÞÒÔÕ ÝØ jÕÔÐÝ èâÐÜßaç; èâÐÜßaçØ ûÕ ÑØâØ ÐãâÞÜÐâáÚØ ÔÕâÕÚâÞÒÐÝØ.\n"
-#~ "In ÃÚÞÛØÚÞ áÕ ÔÒÞãÜØâÕ, Ø×ÐÑÕàØâe \"ÃÔaùÕÝØ CUPS áÕàÒÕà\"."
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "ÁÒÐÚØ  èâÐÜßaç ÜÞàÐ ÔÐ ØÜÐ ØÜe (Ýßà. lp).\n"
-#~ "¾áâÐÛØ ßÐàÐÜÕâàØ ÚÐÞ èâÞ jÕ ÞßØá ØÛØ úÕÓÞÒÐ ÛÞÚÐæØja \n"
-#~ "ÜÞÓã ÑØâØ ÔÕäØÝØáÐÝØ.ºÞjÕ ØÜÕ âàÕÑÐ ÔÐ ÑãÔÕ ØáÚÞàØèâÕÝÞ ×Ð  ÞÒÐj èâÐÜßÐç "
-#~ "Ø\n"
-#~ "ÚÐÚÞ jÕ èâÐÜßÐç ßÞÒÕ×ÐÝ?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "ÁÒÐÚØ 'àÕÔ' ×Ð èâÐÜßã (ã ÚÞøØ áÕ áÛÐÖã ßÞáÛÞÒØ ×Ð èâÐÜßÐúÕ) ×ÐåâÕÒÐ\n"
-#~ "ØÜÕ (ÞÑØçÝÞ lp) Ø 'spool' ÔØàÕÚâÞàØøãÜ ÚÞøØ ã× âÞ ØÔÕ. ºÞøÕ ØÜÕ Ø "
-#~ "ÔØàÕÚâÞàØøãÜ\n"
-#~ "ÔÐ ÚÞàØáâØÜ ×Ð ÞÒÐø àÕÔ ×Ð èâÐÜßã Ø ÚÐÚÞ jÕ  èâÐÜßÐç ßÞÒÕ×ÐÝ?"
-
-#~ msgid "Name of queue"
-#~ msgstr "¸ÜÕ queue-a "
-
-#~ msgid "Spool directory"
-#~ msgstr "'Spool ÔØàÕÚâÞàØøãÜ"
-
-#~ msgid "Disable"
-#~ msgstr "¾ÝeÜÞÓãûØ"
-
-#~ msgid "Enable"
-#~ msgstr "¾ÜÞÓãûØ"
-
-#, fuzzy
-#~ msgid "fsck failed: "
-#~ msgstr "ÜÞÝâØàÐúÕ ÝØøÕ ãáßÕÛÞ"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "´Ð ÑØ ÞÜÞÓãûØÛØ ÒÕûã áØÓãàÝÞáâ áØáâÕÜÐ, Ø×ÐÑÕàØâÕ \"ºÞàØáâØ shadow äÐøÛ\" "
-#~ "Ø\n"
-#~ "\"Use MD5 passwords\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "ÃÚÞÛØÚÞ ÒÐè àÐçãÝÐà ÚÞàØáâØ NIS, Ø×ÐÑÕàØâÕ \"ºÞàØáâØ NIS\". ÃÚÞÛØÚÞ "
-#~ "ÝØáâÕ\n"
-#~ "áØÓãàÝØ ÚÞÝâÐÚâØàÐøâÕ ÒÐèÕÓ ÐÔÜØÝØáâàÐâÞàÐ."
-
-#~ msgid "yellow pages"
-#~ msgstr "ÖãâÕ áâàÐÝØæÕ"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "LAN ÚÞÝäØÓãàÐæØøa"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "¿àÞÒÐjÔÕàÞÒ dns 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "¿àÞÒÐjÔÕàÞÒ dns 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "ºÐÚÞ ÖÕÛØâÕ ÔÐ áÕ ÚÞÝÕÚâãjÕâÕ ÝÐ ØÝâÕàÝÕâ ?"
-
-#~ msgid "cannot fork: "
-#~ msgstr "½Õ ÜÞÓã ÔÐ fork-ãjeÜ:"
-
-#~ msgid "Configure..."
-#~ msgstr "KÞÝäØÓãàÐæØjÐ..."
-
-#, fuzzy
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "LAN ÚÞÝäØÓãàÐæØøa"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "¸×ÐÑÕàØâÕ ÒÕÛØçØÝã %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "¾âÒÐàÐÜ ÚÞÝÕÚæØjã..."
-
-#~ msgid "Standard tools"
-#~ msgstr "ÁâÐÝÔÐàÔÝØ ÐÛÐâØ"
-
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "ºÞÝäØÓãàÐæØøÐ ×a Lilo/Grub"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "¾ÒÐ startup áÚàØßâÐ ßÞÚãèÐÒÐ ãçØâÐâØ ÜÞÔãÛÕ ×Ð usb ÜØèa"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "ºÞÝäØÓãàÐæØøa áâØÛÐ áâÐàâÕàa"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "ÁÐÔÐ ÚÐÔÐ áâÕ ÚÞÝäØÓãàØáÐÛØ Òaèã ¸ÝâÕàÝÕâ ÚÞÝÕÚæØjã,\n"
-#~ "Òaè ÚÞÜßjãâÕà ÜÞÖÕâÕ ßÞÔÕáØâØ ×Ð ÔeùeúÕ úÕÓÞÒÕ ¸ÝâÕàÝÕâ ÚÞÝÕÚæØje.\n"
-#~ "½ÐßÞÜÕÝa: ßÞâàÕÑÐÝa ÒÐÜ jÕ ÜàeÖÝÐ ÚÐàâØæÐ ÔÐ ÑØ ßÞÔÕáØÛØ ÛÞÚÐÛÝã ÜàeÖã"
-#~ "(LAN).\n"
-#~ "\n"
-#~ "´Ð ÛØ ÖÕÛØâÕ ÔÐ ßÞÔÕáØâÕ ÔeùeúÕ ¸ÝâÕàÝÕâ ÚÞÝÕÚæØje ?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "°ãâÞÜÐâáÚe ×ÐÒØáÝÞáâØ"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "ºÞÝäØÓãàØáÐúÕ  LILO/GRUB áâÐàâÕàa"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "½ÐßàÐÒØ áâÐàâÝã ÔØáÚÕâã"
-
-#~ msgid "Format floppy"
-#~ msgstr "ÄÞàÜÐâØàÐø ÔØáÚÕâã"
-
-#~ msgid "Choice"
-#~ msgstr "¸×ÑÞà"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "åÞàØ×ÞÝâÐÛÝÐ ÐãàÞàa"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "ÒÕàâØÚÐÛÝÐ âàÐÔØæØÞÝÐÛÝÐ ÐãàÞàa"
-
-#~ msgid "gMonitor"
-#~ msgstr "Ó¼ÞÝØâÞà"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "¾ÒÔÕ ÜÞÖÕâÕ ßÞÔÕáØâØ ÝÕÚÕ ÚÞàØáÝÕ ÞßæØøÕ ×Ð ÒÐè áØáâÕÜ.\n"
-#~ "\n"
-#~ "* ÃßÞâàÕÑØ åÐàÔ ÔØáÚ ÞßâØÜØ×ÐæØøã: ¾ÒÐ ÞßæØøÐ ãÑà×ÐÒÐ åÐàÔ ÔØáÚ,ÐÛØ øÕ "
-#~ "áÐÜÞ ×Ð ÝÐßàÕÔÝØøÕ ÚÞàØáÝØÚÕ : ×ÑÞÓ ÜÞÓãûÝÞáâØ ÞèâÕûÕúÐ\n"
-#~ "åÐàÔÐ ãáÛÕÔ ÑÐÓÞÒØâØå chipset-ÞÒÐ.´ÐÚÛe,\n"
-#~ "    ßÐ×Øâe. ·ÐßÐÜâØâÕ ÔÐ ÚÕàÝÕÛ ØÜÐ æàÝã ÛØáâã ÔàÐjÒÕàa Ø \n"
-#~ "    chipset-ÞÒÐ, ÐÛØ ãÚÞÛØÚÞ ÝÕ ÒÞÛØâÕ Ø×ÝÕÝaòeúa, ÞáâÐÒØâÕ ÞÒã ÞßæØjã  "
-#~ "ÝÕßÞÔeèÕÝã.\n"
-#~ "\n"
-#~ "\n"
-#~ "* ±ØàÐúÕ áØÓãàÝÞáÝÞÓ ÝØÒÞÐ: ¼ÞÖÕâÕ ÑØàÐâØ ÝØÒÞ áØÓãàÝÞáâØ ×Ð ÒÐè\n"
-#~ "áØáâÕÜ. ¿àÞçØâÐøâÕ ãßãáâÒÞ ×Ð ÒØèÕ ØÝäÞàÜÐæØøÐ.à ÞáÝÞÒØ: \n"
-#~ "ãÚÞÛØÚÞ ÝÕ ×ÝÐâe, Ø×ÐÑÕàØâe defaulâÞßæØjã\n"
-#~ "\n"
-#~ "\n"
-#~ "* ´ÕäØÝØèØ ÒÕÛØçØÝã RAM-Ð (ÐÚÞ øÕ ßÞâàÕÑÝÞ): à ÝÕÚØÜ áÛãçÐøÕÒØÜÐ,\n"
-#~ "Linux ÝÕ ÜÞÖÕ ÔÐ âÐçÝÞ ÞÔàÕÔØ áÐÒ ØÝáâÐÛØàÐÝØ RAM ÝÐ ÝÕÚØÜ ÜÐèØÝÐÜÐ."
-#~ "ÃÚÞÛØÚÞ áÕ ÞÒÞ ÔÕáØ, áßÕæØäØæØàÐøâÕ âÐçÝã ÒàÕÔÝÞáâ.\n"
-#~ "½ÐßÞÜÕÝÐ: àÐ×ÛØÚÐ ã 2 ØÛØ 4 Mb øÕ ÝÞàÜÐÛÝÐ.\n"
-#~ "\n"
-#~ "\n"
-#~ "* °ãâÞÜÞÝâØàÐúÕ ßàÕÝÞáØÒØå ÜÕÔØøÐ: ÃÚÞÛØÚÞ ÝÕ ÒÞÛØâÕ àãçÝÞ ÜÞÝâØàÐúÕ\n"
-#~ "ßàÕÝÞáØÒØå ÜÕÔØøÐ (CD-ROM, ÔØáÚÕâÐ, Zip) ÚãæÐúÕÜ \"mount\" Ø \"umount\"\n"
-#~ "Ø×ÐÑÕàØâÕ ÞÒã ÞßæØøã.\n"
-#~ "\n"
-#~ "\n"
-#~ "* ¾çØáâØ \"/tmp\" ßàØ áÒÐÚÞÜ áâÐàâaúã áØáâÕÜa: ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ Ø×ÑàØèâe "
-#~ "áÒÕ ÔÐâÞâÕÚÕ Ø ÔØàÕÚâÞàØjãÜeÚÞjØ áÕ ÝÐÛÐ×Õ ã  \"/tmp\" ÚÐÔÐ ÔØÖÕâÕ "
-#~ "áØáâÕÜ,\n"
-#~ "  Ø×ÐÑÕàØâÕ ÞÒã ÞßæØjã.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¾ÜÞÓãûØ Num Lock âÐáâÕà ßàØ áâÐàâÐúã: °ÚÞ ÖÕÛØâÕ ÔÐ Num Lock ÑãÔÕ\n"
-#~ "ÐÚâØÒØàÐÝ ßàØ boot-Ðúã, Ø×ÐÑÕàØâÕ ÞÒã ÞßæØøã (½ÐßÞÜÕÝÐ: Num Lock ÜÞÖÔÐ "
-#~ "ÞßÕâ ÝÕûÕ àÐÔØâØ ßÞÔ X-ØÜÐ, âØ ÜÐÛÕàÐ !)."
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "½Ð ÖÐÛÞáâ, ÓÛÐÒÝÐ ÚÞÝäØÓãàÐæØjÐ jÞè ÝØjÕ ØÜßÛÕÜÕÝâØàÐÝa. ±ãÔØâÕ áâàßùØÒØ."
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "´ÞÑàÞÔÞèÛØ ã çÐàÞÑúÐÚ ×Ð ÚÞÝäØÓãàØáaúÕ ÜàeÖe.\n"
-#~ "ºÞjã ÚÞÜßÞÝÕÝâã ÖÕÛØâÕ ÔÐ ßÞÔÕáØâe?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "¸ÝâÕàÝÕâ/ÜàeÖÝØ ßàØáâãß"
-
-#~ msgid "Mail information"
-#~ msgstr "¸ÝäÞàÜÐæØøÕ Þ ÕÛ.ßÞèâØ"
-
-#~ msgid "No I don't need DHCP"
-#~ msgstr "½Õ, ÜÕÝØ ÝÕâàÕÑÐ DHCP"
-
-#~ msgid "No I don't need NTP"
-#~ msgstr "½Õ, ÜÕÝØ ÝÕâàÕÑÐ NTP"
-
-#~ msgid "No (firewall this off from the internet)"
-#~ msgstr "½Õ (ãÚÞÛØÝâÕ firewall áÐ ÞÒÞÓÐ)"
-
-#~ msgid "Yes (allow this through the firewall)"
-#~ msgstr "´Ð (ßÞáâÐÒØâÕ ÞÒÞ ÚàÞ× firewall)"
-
-#~ msgid "Firewall Configuration Wizard"
-#~ msgstr "çÐàÞÑúÐÚ ×Ð ßÞÔÕèÐÒÐúÕ Firewall-a"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "ÀÐ×ÝÕ ÞßæØøÕ"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "ÀÐ×Ýa ßØâÐúÐ"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "½ØjÕ ÜÞÓãûÕ ÚÞàØáØâØâØ supermount ÚÞÔ  '²ÕÛÚÞÓ' áØÓãàÝÞáÝÞÓ ÝØÒÞÐ"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "ÃßÞ×Þàeúe: à ¾²¾¼ ½¸²¾Ã Á¸³ÃÀ½¾Á¸, ÛÞÓÞÒaúÕ ÚÐÞ ROOT  ã ÚÞÝ×ÞÛØ  ½¸JE "
-#~ "ÔÞ×ÒÞùÕÝÞ!\n"
-#~ "ÃÚÞÛØÚÞ  ÖÕÛØâÕ ÔÐ ÑãÔÕâÕ root, ÜÞàÐâÕ áÕ ãÛÞÓÞÒÐâØ ÚÐÞ ÚÞàØáÝØÚ Ð ÞÝÔÐ "
-#~ "ÔÐ ãÚãæÐâe \"su\".\n"
-#~ "¸ÛØ jÕÔÝÞáâÐÒÝØje, ÝÕÞçÕÚãjâÕ ÔÐ ÚÞàØáâØâÕ ÜaèØÝã ×Ð ÝeèâÞ ÔàãÓÞ ÞáØÜ "
-#~ "ÚÐÞáÕàÒÕà.\n"
-#~ "ÃßÞ×ÞàÕÝØ áâe."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "±ãÔØâÕ ßaÖùØÒØ, ãÚÞÛØÚÞ ãÚùãçØâÕ numlock âÞ  ÜÞÖÕ ÔÞÒÕáâØ ÔÞ âÞÓa ÔÐ "
-#~ "ÜÝÞÓa\n"
-#~ "âÐáâÕàØ ÔÐjã ÑàÞjeÒÕ ãÜÕáâÞ áÛÞÒa (Ýßà: ßàØâØáÚÞÜ ÝÐ `p' ÔÞÑØjÐÜÞ `6')"
-
-#~ msgid "not connected"
-#~ msgstr "ÝØjÕ ÚÞÝÕÚâÞÒÐÝ"
-
-#~ msgid "Actions"
-#~ msgstr "°ÚæØje"
-
-#~ msgid "Scientific applications"
-#~ msgstr "½ÐãçÝÕ ÐßÛØÚÐæØje"
-
-#~ msgid "toot"
-#~ msgstr "toot"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "ÁÕàÒÕà, ´ÐâÞâÕÚÐ/èâÐÜßÐ/ÁÐÜÑa"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "ÁÕàÒÕà, DNS/DHC "
-
-#~ msgid "First DNS Server"
-#~ msgstr "¿àÒØ DNS ÁÕàÒÕà"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "´àãÓØ DNS ÁÕàÒÕà"
-
-#~ msgid "using module"
-#~ msgstr "áÐ ãßÞâàÕÑÞÜ ÜÞÔãÛa"
-
-#~ msgid "Development, Database"
-#~ msgstr "ÀÐ×ÒÞø, ±Ð×Ð ßÞÔÐâÐÚa"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "ÀÐ×ÒÞjÝÞ, ØÝâÕÓàØáÐÝÞ ÞÚàãÖeúe"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "ÀÐ×ÒÞøÝÐ, áâÐÝÔÐàÔÝØ ÐÛÐâØ"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "ÃßÞ×Þàeúe:\n"
-#~ "¿àØåÒÐâÐjãûã ßàÞÜÕÝÕ ÔÞÚ jÕ ÐÚâØÒÐÝÞ ÜÞÖÕ ÔÞÒÕáâØ ÔÞ àãèeúa X ÞÚàãÖeúa."
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "ÃÚÞÛØÚÞ ÝÐáâÐÒØâÕ, jÐ ûã Ø×aûØ Ø× %s ÞÚàãÖeúa"
-
-#~ msgid "eth$_"
-#~ msgstr "eth$_"
-
-#~ msgid "loopback"
-#~ msgstr "ßÞÒàÐâÝÞ"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "ºÞøØ áâÐàâÕà ÖÕÛØâe ÔÐ ÚÞàØáâØâe ?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "°ãâÞ ØÝáâÐÛÐæØÞÝa ÔØáÚÕâa "
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "´Ð ßÞâàÐÖØÜ ÜÞÔÕÜ ?"
-
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "¿ÞÔÕáØ ISDN ÚÞÝÕÚæØjã"
-
-#~ msgid "Configure a cable connection"
-#~ msgstr "¿ÞÔÕáØ ÚÐÑÛÞÒáÚã ÚÞÝÕÚæØjã"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "¾ÝÕÜÞÓãûã ØÝâÕàÝÕâ ºÞÝÕÚæØjã"
-
-#~ msgid "Configure local network"
-#~ msgstr "¿ÞÔÕáØ ÛÞÚÐÛÝØ ÜàÕÖã"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "¿ÞÔÕáØ ¸ÝâÕàÝÕâ ÚÞÝÕÚæØjã / ßÞÔÕáØ ÛÞÚÐÛÝØ ÜàÕÖã"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "»ÞÚÐÛÝØ ÜàÕÖÐ øÕ ÒÕû ßÞÔÕèÕÝÐ.\n"
-#~ "´Ð ÛØ ÖÕÛØâÕ ÔÐ:"
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "ÀeÚÞÝäØÓãàÐæØjÐ ÚÞàØèûeúÕÜ çÐàÞÑúÐÚa..."
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "¼ÐÝØßãÛÐæØjÐ áÐ ÓàÐäØÚÞÜ"
-
-#~ msgid "Multimedia"
-#~ msgstr "¼ãÛâØÜÕÔØja"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Chat (IRC ØÛØ  instant messaging) ßàÞÓàÐÜØ ÚÐÞ èâÞ áã  xchat, licq, gaim, "
-#~ "Ø ÐÛÐâØ ×a âàÐÝáäÕà ÔÐâÞâÕÚa"
-
-#~ msgid "Communication facilities"
-#~ msgstr "ºÞÜãÝØÚÐæØÞÝÕ ÞßæØje"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "¸ÝâÕàÝÕâ °ÛÐâØ"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "ºÛØjÕâÝØ Ø áÕàÒÕàØ ×Ð ÑÐ×Õ ßÞÔÐâÐÚÐ (mysql and postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "ÀÐ×ÒÞøÝÐ C/C++"
-
-#~ msgid "Configure timezone"
-#~ msgstr "¿ÞÔÕáØ ÒàÕÜÕÝáÚã ×ÞÝã"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "¼àeÖÝØ ÐÔÐßâÕà 1 (eth0):"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(ÜÞÖÕ ã×àÞÚÞÒÐâØ ÓàÕèÚÕ)"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "°ÚâØÒØàÐø åÐàÔ ÔØáÚ ÞßâØÜØ×ÐæØøã ?"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "°ÚâØÒØàÐø Num Lock âÐáâÕà ßàØ áâÐàâÐúã"
-
-#~ msgid "Confirm Password"
-#~ msgstr "¿ÞâÒàÔØ ÛÞ×ØÝÚã"
-
-#~ msgid "default"
-#~ msgstr "¿Þ default-y"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "·Ð èâÐ ûÕ âÕ ÚÞàØáØâØ áØáâÕÜ ?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "¸×ÐÑÕàØâÕ ÒÕÛØçØÝã  ØÝáâÐÛÐæØøe"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "ºÞàØáâØ diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "¸×ÑÞà ßÞ ÖÕùØ"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "´Ð ÛØ áâÕ áØÓãàÝÞ ÕÚáßÕàâ !? \n"
-#~ "XÕj,ÑÕ× èÐÛÕ,jÕà ÔÞÑØjÐâe ßàØáâãß ÜÞûÝØÜ ÐÛØ ÞßÐáÝØÜ áâÒÐàØÜÐ.\n"
-#~ "¾ÔÓÞÒÐàaûÕâÕ ÝÐ ßØâaúÐ ÚÐÞ èâÞ je: ``´Ð ÛØ ÖÕÛØâÕ shadow äÐjÛ ×Ð "
-#~ "ÛÞ×ØÝÚe ?'',\n"
-#~ "ÔÐ ÛØ áâÕ áßàÕÜÝØ ÝÐ ÞÔÓÞÒÞàØâÕ ÝÐ ÞÒÐÚÒÐ ßØâaúa ?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "ºÞàØáâØ shadow äÐøÛ"
-
-#~ msgid "shadow"
-#~ msgstr "áÕÝÚa"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "ºÞàØáâØ  MD5 ÛÞ×ØÝÚã"
-
-#~ msgid "Search"
-#~ msgstr "ÂàaÖØ"
-
-#~ msgid "Package"
-#~ msgstr "¿ÐÚÕâ"
-
-#~ msgid "Text"
-#~ msgstr "ÂÕÚáâ"
-
-#~ msgid "Tree"
-#~ msgstr "³àÐÝa"
-
-#~ msgid "Sort by"
-#~ msgstr "ÁÞàâØàÐj ßÞ"
-
-#~ msgid "Category"
-#~ msgstr "ºÐâÕÓÞàØjØ"
-
-#~ msgid "See"
-#~ msgstr "¿ÞÓÛÕÔÐj"
-
-#~ msgid "Installed packages"
-#~ msgstr "¸ÝáâÐÛØàÐÝØ ßÐÚÕâØ"
-
-#~ msgid "Available packages"
-#~ msgstr "´ÞáâãßÝØ ßÐÚÕâØ"
-
-#~ msgid "Show only leaves"
-#~ msgstr "¿àØÚÐÖØ áÐÜÞ ÞáâÐÒùÕÝÕ"
-
-#~ msgid "Expand all"
-#~ msgstr "¿àÞèØàØ áÒe"
-
-#~ msgid "Collapse all"
-#~ msgstr "ÁÚãßØ áÒÕ"
-
-#~ msgid "Add location of packages"
-#~ msgstr "´ÞÔÐj ÛÞÚÐæØjã ßÐÚÕâa"
-
-#~ msgid "Update location"
-#~ msgstr "¾áÒeÖØ ÛÞÚÐæØøã"
-
-#~ msgid "Remove"
-#~ msgstr "ÃÚÛÞÝØ"
-
-#~ msgid "Find Package"
-#~ msgstr "¿àÞÝaòØ ßÐÚÕâ"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "¿àÞÝaòØ ßÐÚÕâ ÚÞjØ áÐÔàÖØ äÐjÛ"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "±ØàÐj Ø×Üeòã ¸ÝáâÐÛØàÐÝÞ Ø ´ÞáâãÝÞ"
-
-#~ msgid "Choose package to install"
-#~ msgstr "¸×ÐÑÕàØ ßÐÚÕâe ×Ð ØÝáâÐÛÐæØøã"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "¿àÞÒÕàÐ ×ÐÒØáÝÞáâØ"
-
-#~ msgid "Wait"
-#~ msgstr "¼ÞÜÕÝÐâ..."
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "ÁÛeÔeûØ ßÐÚÕâØ ûÕ ÑØâØ ØÝáâÐÛØàÐÝØ"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "´ÕØÝáâÐÛØàÐÜ RPM-ÞÒe"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "ºÞjØ ßÐÚÕâ âàaÖØâÕ"
-
-#~ msgid "%s not found"
-#~ msgstr "%s ÝØjÕ ßàÞÝaòÕÝ"
-
-#~ msgid "No match"
-#~ msgstr "½ÕÜÐ ßÞÚÛÐßaúa"
-
-#~ msgid "No more match"
-#~ msgstr "½ÕÜÐ ÒØèÕ ßÞÚÛÐßaúa "
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrakÕ jÕ âàÕÝãâÝÞ ã ``low memory'' ÜÞÔã.\n"
-#~ "ÀÕáâÐàâãjÕÜ  rpmdrakÕ ÔÐ ÑØ ÞÜÞÓãûØÞ âàaÖeúÕ ÔÐâÞâÕÚa"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "ºÞjã ÔÐâÞâÕÚã âàaÖØâe ?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "èâÐ âàaÖØâe ?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "´ÐjâÕ ØÜe (Ýßà: `extra', `commercial')"
-
-#~ msgid "Directory"
-#~ msgstr "´ØàÕÚâÞàØjãÜ"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "cdrom ÝØjÕ ÔÞáâãßÐÝ(ÝÕÜÐ ÝØèâÐ ã  /mnt/cdrom)  "
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL ÔØàÕÚâÞàØjãÜÐ ÚÞjØ áÐÔàÖØ RP¼-ÞÒe"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "·a FTP Ø  HTTP  jÕ ßÞâàÕÑÝÞ ÔÐ ÔÐâÕ ÛÞÚÐæØjã ×Ð hdlist\n"
-#~ "¾ÝÐ ÜÞàÐ ÑØâØ àÕÛÐâØÒÝÐ ã ÞÔÝÞáã ÝÐ ÓÞàÕ ÝÐÒÕÔÕÝØ URL"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "¼ÞÛØÜ ãÒaÖØâÕ áÛÕÔeûã ØÝäÞàÜÐæØøã"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s øÕ ÒÕû ã ãßÞâàÕÑØ"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "¾áÒeÖÐÒaúÕ RPM ÑÐ×Õ"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "ÃÚÛÐúÐÜ ãÝÞá  %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "¿àÞÝaòØ ÞáâÐÒùÕÝe"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "¿àÞÝaòØ ÞáâÐÒùÕÝØå âàaÖØ ÜÐÛÞ ÒàÕÜÕÝa"
-
-#~ msgid "Czech"
-#~ msgstr "ÇÕèÚØ"
-
-#~ msgid ""
-#~ "The system is now connected to Internet! Congratulation.\n"
-#~ "Feel free to launch draknet at any time to setup your connection.\n"
-#~ msgstr ""
-#~ "ÁØáâÕÜ jÕ áÐÔÐ ÚÞÝÕÚâÞÒÐÝ ÝÐ ¸ÝâÕàÝÕâ ! çÕáâØâÐÜÞ.\n"
-#~ "¼ÞÖÕâÕ áÛÞÑÞÔÝÞ ßÞÚàÕÝãâØ draknet ÑØÛÞ ÚÐÔÐ Ø ßÞÔÕáØâØ ÚÞÝÕÚæØjã.\n"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "¿àÞÝaòÕÝÐ ISDN ÚÐàâØæÐ:\n"
-
-#~ msgid "France"
-#~ msgstr "ÄàÐÝæãáÚa"
-
-#~ msgid "Other countries"
-#~ msgstr "´àãÓÕ ×ÕÜùe"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "à ÚÞjÞj áÕ ×ÐÜùØ ÝÐÛÐ×Øâe ?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Alcatel ÜÞÔÕÜ"
-
-#~ msgid "ECI modem"
-#~ msgstr "ECI ÜÞÔÕÜ"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "°ÚÞ jÕ Òaè adsl ÜÞÔÕÜ Alcatel -ÞÒ,Ø×ÐÑÕàØâÕ Alcatel.ÃÚÞÛØÚÞ ÝØjÕ,ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "ÝÕ ÚÞàØáâØ pppoe"
-
-#~ msgid "mandatory"
-#~ msgstr "ÞÑÐÒÕ×ÝÞ"
-
-#~ msgid "interesting"
-#~ msgstr "ØÝâÕàÕáÐÝâÝÞ"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (ÒaÖÝÞ)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n(ÒÕÞÜÐ ÛÕßÞ)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n(ÛÕßÞ)"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "½Õ ÜÞÓã ØÝáâÐÛØàÐâØ ipchains RPM áÐ urpmi."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "½Õ ÜÞÓã ØÝáâÐÛØàÐâØ dhcp RPM áÐ urpmi."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "½Õ ÜÞÓã ØÝáâÐÛØàÐâØ linuxconf RPM áÐ urpmi"
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "½Õ ÜÞÓã ØÝáâÐÛØàÐâØ bind RPM áÐ urpmi"
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "½Õ ÜÞÓã ØÝáâÐÛØàÐâØ caching-nameserver RPM áÐ urpmi"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "½Ð ÚÞøØ áÕàØøáÚØ ßÞàâ øÕ ÒÐè ÜØè ßàØÚùãçÕÝ?"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "ÀÕÚÞÝäØÓãàØèØ ÛÞÚÐÛÝã ÜàÕÖã"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "²aè àÐçãÝÐà ÜÞÖÕ ÑØâØ ßÞÔeèÕÝ ×Ð ÔeùeúÕ ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ.\n"
-#~ "\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "ÁÒÕ jÕ ÚÞÝäØÓãàØáÐÝÞ.\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "ºÞÝÕÚâãj ÝÐ ¸ÝâÕàÝÕâ áÐ ÞÑØçÝØÜ ÜÞÔÕÜÞÜ"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "ºÞÝÕÚâãj ÝÐ ¸ÝâÕàÝÕâ áÐ ISDN ÚÐàâØæÞÜ"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "ºÞÝÕÚâãj ÝÐ ¸ÝâÕàÝÕâ ÚÞàØáâeûØ DSL (ØÛØ  ADSL)"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "ºÞÝÕÚâãj ÝÐ ¸ÝâÕàÝÕâ ÚÞàØáâeûØ ºÐÑÛ"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "²àÕÜÕ (ã áÕÚãÝÔÐÜa) ØÝÐÚâØÒÝÞáâØ ÝÐÚÞÝ ÚÞjÕÓ\n"
-#~ "áÕ ÒÕ×Ð ßàÕÚØÔa. (ÞáâÐÒØâØ ßàÐ×ÝÞ ãÚÞÛØÚÞ ÓÐ ÖÕÛØâÕ ØáÚùãçÕÝÞÓ)"
-
-#~ msgid "Germany"
-#~ msgstr "½ÕÜÐçÚa"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "½ÕÜÐçÚa (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "ÈâÐ ÖÕÛØâÕ ÔÐ ãàÐÔØâÕ?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "¸ÝáâÐÛØàÐø/ÁaçãÒÐj"
-
-#~ msgid "Rescue"
-#~ msgstr "ÁaçãÒÐj"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "ºÞøØ âØß ßÐàâØæØøÕ ÖÕÛØâÕ?"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "¸×ÐÑÕàØâÕ \"¸ÝáâÐÛÐæØøÐ\" ÐÚÞ ÝÕÜÐâÕ ÒÕû ØÝáâÐÛØàÐÝ Linux, ØÛØ ÖÕÛØâÕ\n"
-#~ "ÔÐ ÚÞàØáâØâÕ ÒØèÕ ÔØáâàØÑãæØøÐ ØÛØ ÒÕà×ØøÐ.\n"
-#~ "\n"
-#~ "¸×ÐÑÕàØâÕ \"ÁßÐáÐÒaúe\" ÐÚÞ ÖÕÛØâÕ ÔÐ áaçãÒÐâÕ ßàÕâåÞÔÝã \n"
-#~ "ÒÕà×Øøã Mandrake-Ð »ØÝãÚáa:\n"
-#~ "\n"
-#~ "\n"
-#~ "¸×ÐÑÕàØâÕ:\n"
-#~ "\n"
-#~ " - °ãâÞÜÐâáÚØ(ßàÕßÞàãçÕÝÞ) : ÃÚÞÛØÚÞ ÝØáâÕ ÔÞ áÐÔÐ ØÝáâÐÛØàÐÛØ Linux.\n"
-#~ "Ø×ÐÑÕàØâÕ ÞÒÞ.½°¿¾¼µ½°:\n"
-#~ "  ÜàÕÖÝÕ ÞßæØjÕ ÝeûÕ ÑØâØ ßÞÔeèÕÝÕ âÞÚÞÜ ØÝáâÐÛÐæØjÕ,ãßÞâàÕÑØâÕ\"LinuxConf"
-#~ "\"\n"
-#~ "  ÔÐ ÑØ ÚÞÝäØÓãàØáÐÛØ ÜàeÖÝÕ ÞßæØjÕ ÝÐÚÞÝ ØÝáâÐÛÐæØje.\n"
-#~ "\n"
-#~ " - ÁÐ ßÞÔÕèÐÒÐúØÜÐ (Customized): ÃÚÞÛØÚÞ áâÕ ãßÞ×ÝÐâØ áÐ »ØÝãÚáÞÜ ÜÞûØ "
-#~ "ûÕâÕ\n"
-#~ "ÔÐ Ø×ÐÑÕàÕâÕ ÜÞÔ ØÝáâÐÛÐæØøÕ.\n"
-#~ "   ÚÞjØ jÕ ×ÐÒØáØ ÞÔ ÒaèØå ßÞâàÕÑÐ ÝÐÚÞÝ ØÝáâÐÛÐæØje.¿ÞÓÛÕÔÐjâÕ ÝØÖÕ ×Ð "
-#~ "ÒØèÕ ßÞÔÐâÐÚÐ.\n"
-#~ "\n"
-#~ " - µÚáßÕàâ: ÃÚÞÛØÚÞ áâÕ ÔÞÑàÞ ßÞ×ÝÐøâÕ GNU/Linux Ø ÖÕÛØâÕ Ø×ã×ÕâÝÞ\n"
-#~ "ßÞÔÕáØÒã ØÝáâÐÛÐæØøã ÞÝÔÐ øÕ ÞÒÞ ßàÐÒØ ÜÞÔ ×Ð ÒÐá. ¼ÞûØ ûÕâÕ Ø×ÐÑàÐâØ\n"
-#~ "ÚÞàØèûÕúÕ áØáâÕÜÐ ÚÐÞ \"¿àÕßÞàãçÕÝÞ\".\n"
-#~ "    °ÛØ ÜÞÛØÜ ²Ðá, ½µ¼¾Jµ ±¸À°Â¸ ¾²Ã ¾¿Æ¸Jà ú¾»¸º¾ ½µ ·½°Âµ èâa "
-#~ "À°´¸ÂE !\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "ÁÐÔÐ, ÜÞÖÕâÕ Ø×ÐÑàÐâØ ÝÐ ÚÞøã ßÐàâØæØøã(Õ) ÖÕÛØâÕ ØÝáâÐÛØàÐâØ\n"
-#~ "ÒÐè Mandrake Linux áØáâÕÜ ãÚÞÛØÚÞ øÕ(áã) ÞÝÐ ãÝÐßàÕÔ ÞÔàÕòÕÝÐ(Õ)\n"
-#~ "(ßÞáâÞøÕûÞÜ »ØÝãÚá ØÝáâÐÛÐæØøÞÜ ØÛØ ÝÕÚØÜ ßàÞÓàÐÜÞÜ ×Ð ßÐàâØæØàÐúÕ "
-#~ "ÔØáÚÐ).\n"
-#~ "à ÔàãÓØÜ áÛãçÐøÕÒØÜÐ ßÐàâØæØøÕ ÝÐ åÐàÔ ÔØáÚã ÜÞàÐøã ÑØâØ ÔÕäØÝØáÐÝÕ.\n"
-#~ "¾ÒÐ ÞßÕàÐæØøÐ áÕ áÐáâÞøØ ÞÔ ÛÞÓØçÚÞÓ ÔÕùÕúÐ åÐàÔ ÔØáÚÐ ÝÐ ÝÕÚÞÛØÚÞ "
-#~ "ÔÕÛÞÒÐ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ÃÚÞÛØÚÞ ÜÞàÐâÕ ÔÐ ÚàÕØàÐâÕ ÝÞÒÕ ßÐàâØæØøÕ, ÚÞàØáâØâÕ \"°ãâÞ ÔØáÛÞæØàÐúÕ"
-#~ "\"×Ð ÐãâÞÜÐâáÚÞ ÚàÕØàÐúÕ\n"
-#~ "ßÐàâØæØøÐ ×Ð »ØÝãÚá. ¼ÞÖÕâÕ Ø×ÐÑàÐâØ ÔØáÚ×Ð ßÐàâØæØàÐúÕ\n"
-#~ "ÚÛØÚÞÜ ÝÐ \"hda\" ×Ð ßàÒØ IDE ÔØáÚ, \"hdb\" ×Ð ÔàãÓØ ØÛØ\n"
-#~ "\"sda\" ×Ð ßàÒØ SCSI ÔØáÚ Ø âÐÚÞ ÔÐùÕ.\n"
-#~ "\n"
-#~ "\n"
-#~ "´ÒÕ ÓÛÐÒÕ ßÐàâØæØøÕ áã: root ßÐàâØæØøÐ (/), ÚÞøÐ øÕ ßÞÛÐ×ÝÐ âÐçÚÐ\n"
-#~ "(ÔØàÕÚâÞàØøãÜ)\n"
-#~ "åØøÕàÐàåØøÕ äÐøÛ-áØáâÕÜÐ, Ø (/boot), ÚÞøØ áÐÔàÖØ áÒÕ äÐøÛÞÒÕ ßÞâàÕÑÝÕ\n"
-#~ "×Ð ßÞÔØ×ÐúÕ ÞßÕàÐâØÒÝÞÓ áØáâÕÜÐ ßÞ ãÚùãçÕúã àÐçãÝÐàÐ\n"
-#~ "\n"
-#~ "\n"
-#~ "¿ÞèâÞ øÕ ßàÞæÕá ßÐàâØæØàÐúÐ ÔØáÚÐ ÞÑØçÝÞ ÝÕßÞÒàÐâÐÝ, ÞÑØçÝÞ øÕ\n"
-#~ "äàãáâàØàÐøãûØ Ø ×ÐáâàÐèãøãûØ ×Ð ßÞçÕâÝØÚÕ. DiskDrake ßÞøÕÔÝÞáâÐÒùãøÕ\n"
-#~ "ßàÞæÕá ÔÐ áÕ âÞ ÝÕ ÑØ ÔÕèÐÒÐÛÞ. ¿àÞçØâÐøâÕ ÔÞÚãÜÕÝâÐæØøã Ø ÝÕ ÖãàØâÕ.\n"
-#~ "\n"
-#~ "\n"
-#~ "¼ÞÖÕâÕ ßàØáâãßØâØ ÑØÛÞ ÚÞjÞj ÞßæØjØ ßÞÜÞûã âÐáâÐâãàe : ÚàeûØâÕ áe ÚàÞ× "
-#~ "ßÐàâØæØjÕ \n"
-#~ "ÚÞàØáâeûØ  Tab Ø Up/Down âÐáâÕàe. ºÐÔÐ je ßÐàâØæØøÐ Ø×ÐÑàÐÝa,ÜÞÖÕâÕ "
-#~ "ÚÞàØáâØâØ: \n"
-#~ "\n"
-#~ "- Ctrl-c  ×Ð ÚàÕØàaúe ÝÞÒÕ ßÐàâØæØje (ÚÐÔÐ jÕ Ø×ÐÑàÐÝÐ ßàÐ×ÝÐ ßÐàâØæØøÐ)\n"
-#~ "\n"
-#~ "- Ctrl-d  ×Ð ÑàØáaúe  ßÐàâØæØje\n"
-#~ "\n"
-#~ "- Ctrl-m  ×Ð ßÞÔeèÐÒaúÕ âaçÚÕ ÜÞÝâØàaúa \n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "ÁÒÕ ÝÞÒÞäÞàÜØàÐÝÕ ßÐàâØæØøÕ ÜÞàÐøã ÑØâØ äÞàÜÐâØàÐÝÕ ×Ð ãßÞâàÕÑã\n"
-#~ "(äÞàÜÐâØàÐúÕ-ÚàÕØàÐúÕ äÐøÛ-áØáâÕÜÐ). °ÚÞ ÖÕÛØâÕ, ÜÞÖÕâÕ àÕäÞàÜÐâØàÐâØ\n"
-#~ "ÒÕû ßÞáâÞøÕûÕ ßÐàâØæØøÕ ÔÐ ÑØ Ø×ÑàØáÐÛØ ßÞÔÐâÚÕ ÚÞøÕ áÐÔàÖÕ.\n"
-#~ "½ÐßÞÜÕÝÐ: ÝØøÕ ÝÕÞßåÞÔÝÞ ßÞÝÞÒÝÞ äÞàÜÐâØàÐúÕ ßÞáâÞøÕûØå ßÐàâØæØøÐ\n"
-#~ "ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ áÐçãÒÐâÕ ßÞÔÐâÚÕ ÝÐ úØÜÐ. ¾ÝØ áÕ ÞÑØçÝÞ ÝÐÛÐ×Õ\n"
-#~ "ã /home Ø /usr/local ÔØàÕÚâÞàØøãÜØÜÐ."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "¸×ÐÑàÐÝØ ßÐÚÕâØ áÕ ØÝáâÐÛØàÐøã. ¾ÒÐ ÞßÕàÐæØøÐ ÑØ âàÕÑÐÛÐ ßÞâàÐjâØ\n"
-#~ "ÝÕÚÞÛØÚÞ ÜØÝãâÐ ãÚÞÛØÚÞ ÝØáâÕ Ø×ÐÑàÐÛØ ÐÖãàØàÐúÕ\n"
-#~ "ÝÐ ßÞáâÞøÕûØ áØáâÕÜ.à âÞÜ áÛãçÐøã ßÞâàÕÑÝÞ øÕ ÝÕáâÞ ÒØèÕ ÒàÕÜÕÝÐ."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "ÃÚÞÛØÚÞ DrakX ÝØøÕ ãáßÕÞ ÔÐ ÝÐòÕ ÒÐèÕÓ ÜØèÐ, ØÛØ ÖÕÛØâÕ ÔÐ ßàÞÒÕàØâÕ\n"
-#~ "èâÐ øÕ ãàÐòÕÝÞ, ßÞÓÛÕÔÐøâÕ ÝÐ ÓÞàÕ ÓÔÕ áÕ ÝÐÛÐ×Ø ÛØáâÐ\n"
-#~ "\n"
-#~ "\n"
-#~ "ÃÚÞÛØÚÞ ÒÐÜ ßÞáâÐÒÚÐ ÞÔÓÞÒÐàa, áÐÜÞ ßàÕòØâÕ ÝÐ ÔÕÞ ÚÞøØ ÖÕÛØâÕ\n"
-#~ "ÚÛØÚÞÜ ÝÐ ÜÕÝØ ÝÐ ÛÕÒÞø áâàÐÝØ. ÃÚÞÛØÚÞ ÝÕ, Ø×ÐÑÕàØâÕ âØß ÜØèÐ ã ÜÕÝØøã\n"
-#~ "×Ð ÚÞøØ ÜØáÛØâÕ ÔÐ ÝÐøÒØèÕ ÞÔÓÞÒÐàÐ ÒÐèÕÜ ÜØèã.\n"
-#~ "\n"
-#~ "\n"
-#~ "à áÛãçÐøã ÔÐ ØÜÐâÕ áÕàØøáÚØ ÜØè, ÜÞàÐûÕâÕ Þ×ÝÐçØâØ ã DrakX-ã ÝÐ ÚÞøØ\n"
-#~ "áÕàØøáÚØ ßÞàâ øÕ ßàØÚùãçÕÝ."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "¾ÒÐø ÔÕÞ øÕ ßÞáÒÕûÕÝ ÚÞÝäØÓãàØáÐúã ÛÞÚÐÛÝÕ ÜàÕÖÕ (LAN) ØÛØ ÜÞÔÕÜÐ.\n"
-#~ "\n"
-#~ "¸×ÐÑÕàØâÕ \"»ÞÚÐÛÝØ ÜàÕÖÕ\" Ø DrakX ûÕ ßÞâàÐÖØâØ ¸ÝâàÐÝÕâ ÐÔÐßâÕà\n"
-#~ "ÝÐ ÒÐèÞø ÜÐèØÝØ. PCI ÐÔÐßâÕàØ ÑØ âàÕÑÐÛÞ ÔÐ áÕ ßàÞÝÐòã Ø ØÝØæØàÐøã\n"
-#~ "ÐãâÞÜÐâáÚØ. ¼ÕòãâØÜ, ãÚÞÛØÚÞ áã ISA, ÐãâÞÔÕâÕÚæØja ÝÕûÕ àÐÔØâØ, ÒÕû "
-#~ "âàÕÑÐ\n"
-#~ "ÔÐ Ø×ÐÑÕàÕâÕ ÔàÐøÒÕà áÐ ÛØáâÕ ÚÞja ûÕ áÕ ßÞjaÒØâØ.\n"
-#~ "\n"
-#~ "\n"
-#~ "·Ð SCSI ÐÔÐßâÕàÕ ÜÞÖÕâÕ ßãáâØâØ ÔÐ ÔàÐøÒÕà ßàÕâàÐÖØ ÐÔÐßâÕà, ØÛØ\n"
-#~ "ÔÐ ãÝÕáÕâÕ áßÕæØäØÚÐæØøÕ ã ÔàÐøÒÕà ÝÐòÕÝÕ ã ÔÞÚãÜÕÝâÐæØøØ ÒÐèÕÓ\n"
-#~ "åÐàÔÒÕàÐ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ÃÚÞÛØÚÞ ØÝáâÐÛØàÐâÕ Mandrake Linux áØáâÕÜ ÝÐ ÜÐèØÝã ÚÞï øÕ ÔÕÞ ßÞáâÞøÕûÕ\n"
-#~ "ÜàÕÖÕ, ÜàÕÖÝØ ÐÔÜØÝØáâàÐâÞà ûÕ ÒÐÜ ÔÐâØ áÒÕ ßÞâàÕÑÝÕ ØÝäÞàÜÐæØøÕ\n"
-#~ "(IP ÐÔàÕáã, ØÜÕ ÜÐèØÝÕ Ø Ôà.) ÃÚÞÛØÚÞ ßÞÔÕèÐÒÐâÕ ßàØÒÐâÝã ÜàÕÖã\n"
-#~ "ã ÚãûØ, áÐÜØ ÑØàÐâÕ ÐÔàÕáÕ.\n"
-#~ "\n"
-#~ "\n"
-#~ "¸×ÐÑÕàØâÕ \"±ØàaúÕ áÐ ÜÞÔÕÜÞÜ\" Ø ¸ÝâÕàÝÕâ ÚÞÝÕÚæØøÐ áÐ ÜÞÔÕÜÞÜ ûÕ ÑØâØ\n"
-#~ "ÚÞÝäØÓãàØáÐÝÐ. DrakX ûÕ âàÐÖØâØ ÜÞÔÕÜ, ãÚÞÛØÚÞ ÓÐ ÝÕ ßàÞÝÐòÕ, ÜÞàÐâÕ\n"
-#~ "Þ×ÝÐçØâØ áÕàØøáÚØ ßÞàâ ÝÐ ÚÞøØ øÕ ßÞÒÕ×ÐÝ ÜÞÔÕÜ."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "Linux ßàÕßÞ×ÝÐøÕ ÜÝÞÓÞ âØßÞÒÐ èâÐÜßÐçÐ. ÁÒÐÚØ ÞÔ úØå ×ÐåâÕÒÐ\n"
-#~ "ÔàãÓÐçØøã ÚÞÝäØÓãàÐæØøã.\n"
-#~ "·ÐßÐÜâØâÕ ÔÐ spooler ÚÞàØáâØ 'lp' ÚÐÞ default ØÜÕ èâÐÜßÐçÐ,âÐÚÞ Ôa\n"
-#~ "ÜÞàÐâÕ ØÜÐâØ ÑÐà 1 èâÐÜßÐç áÐ âØÜ ØÜÕÝÞÜ ÐÛØ Üã ÜÞÖÕâÕ ÔÐâØ ÒØèe\n"
-#~ "ØÜÕÝÐ ÞÔÒÞjÕÝØå áa ×ÝÐÚÞÜ '|',Ýßà.: Epson Stylus 600|lp.\n"
-#~ " èâÐÜßÐç ÚÞjØ ØÜÐ  \"lp\" ã áÒÞÜ ØÜÕÝã(ØÜÐ) je Ø  default èâÐÜßÐç.\n"
-#~ "\n"
-#~ "\n"
-#~ "ÃÚÞÛØÚÞ øÕ ÒÐè èâÐÜßÐç ÔØàÕÚâÝÞ áßÞøÕÝ áÐ àÐçãÝÐàÞÜ, Ø×ÐÑÕàØâÕ\n"
-#~ "\"»ÞÚÐÛÝØ èâÐÜßÐç\". ¼ÞàÐûÕâÕ ÝÐ×ÝÐçØâØ ÝÐ ÚÞøØ øÕ ßÞàâ èâÐÜßÐç áßÞøÕÝ,\n"
-#~ "Ø Ø×ÐÑàÐâØ ÞÔÓÞÒÐàÐøãûØ äØÛâÕà.\n"
-#~ "\n"
-#~ "\n"
-#~ "ÃÚÞÛØÚÞ  ÖÕÛØâÕ ÔÐ ßàØáâãßØâÕ èâÐÜßÐçã ÛÞæØàÐÝÞÜ ÝÐ remote Unix ÜaèØÝØ,\n"
-#~ "ÜÞàÐâÕ Ø×ÐÑàÐâØ  \"Remote lpd\".´Ð ÑØ âÞ äãÝÚæØÞÝØáÐÛÞ ÝØjÕ ßÞâàÕÑÝÞ\n"
-#~ "ÚÞàØáÝØçÚÞ ØÜe \n"
-#~ "Ø ÛÞ×ØÝÚÐ ,ÐÛØ ÒÐÜ jÕ ßÞâàÕÑÝÞ ÔÐ ×ÝÐâÕ ØÜÕ  printing queue-Ð ÝÐ "
-#~ "áÕàÒÕàã.\n"
-#~ "\n"
-#~ "\n"
-#~ "ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ßàØáâãßØâÕ ÜàÕÖÝÞÜ (SMB ÝÐ Win 9x/NT ÜÐèØÝÐÜÐ) "
-#~ "èâÐÜßÐçã\n"
-#~ "âàÕÑÐ ÔÐ ÞÔàÕÔØâÕ úÕÓÞÒÞ SMB ØÜÕ (ÚÞøÕ ÝØøÕ Ø úÕÓÞÒÞ TCP/IP ØÜÕ), Ø \n"
-#~ "ÒÕàÞÒÐâÝÞ\n"
-#~ "úÕÓÞÒã IP ÐÔàÕáã, ÚÐÞ Ø ÚÞàØáÝØçÚÞ ØÜÕ, àÐÔÝã Óàãßã Ø ÛÞ×ØÝÚã (password)\n"
-#~ "èâÞ\n"
-#~ "øÕ áÒÕ ßÞâàÕÑÝÞ ÔÐ ÑØ ßàØáâãßØÛØ èâÐÜßÐçã, Ø ÝÐàÐÒÝÞ ØÜÕ èâÐÜßÐçÐ. ¸áâØ\n"
-#~ "ßÞáâãßÐÚ áÕ ßÞÔã×ØÜÐ Ø ×Ð NetWare èâÐÜßÐçÕ, Ø×ã×ÕÒ ØÜÕÝÐ àÐÔÝÕ ÓàãßÕ."
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "¿àÕßÞàãçãøÕÜÞ ÔÐ ÞÒÔÕ ÞÔÓÞÒÞàØâÕ \"´Ð\". ÃÚÞÛØÚÞ ØÝáâÐÛØàÐâÕ MS Windows\n"
-#~ "áÐ ÚÐáÝØøØÜ ÔÐâãÜÞÜ ÞÝ ûÕ áÐÜ ãßØáÐâØ ÝÞÒØ boot áÕÚâÞà.\n"
-#~ "ÃÚÞÛØÚÞ ÝØáâÕ ÝÐßàÐÒØÛØ áâÐàâÝã ÔØáÚÕâã, ÝÕûÕâÕ ÒØèÕ ÜÞûØ ßÞÔØûØ Linux."
-
-#~ msgid "Move your wheel!"
-#~ msgstr "¿ÞÜÕàØâÕ ÒÐè âÞçÚØû"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "½Õ ßÐÜâØâØ ßàÞÜÕÝÕ?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "ºÞøØ âØß ÜØèÐ ØÜÐâÕ?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "°ãâÞÜÐâáÚÞ ßÞÔÕèÐÒÐúÕ àÕ×ÞÛãæØøÕ"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "´Ð ÑØ ßàÞÝÐèÛØ ÞÔÓÞÒÐàÐøãûã àÕ×ÞÛãæØøã ßÞÚãèÐûÕÜÞ áÐ ÔàãÓØÜ.\n"
-#~ "²Ðè ÕÚàÐÝ ûÕ ÑÛØÝÚÐâØ...\n"
-#~ "¼ÞÖÕâÕ ãÓÐáØâØ ÜÞÝØâÞà ÐÚÞ ÖÕÛØâÕ, ÚàÐø ûÕ ÑØâØ Þ×ÝÐçÕÝ ×ÒãçÝØÜ áØÓÝÐÛÞÜ"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "¼ÞÓã ßÞÚãèÐâØ ÔÐ ßàÞÝÐòÕÜ ÞÔÓÞÒÐàÐøãûã àÕ×ÞÛãæØøã (Ýßà: 800x600).\n"
-#~ "¸ßÐÚ, âÞ ÜÞÖÕ ÔÞÒÕáâØ ÔÞ ÑÛÞÚØàÐúÐ àÐçãÝÐàÐ.\n"
-#~ "´Ð ÛØ ÖÕÛØâÕ ßÞÚãèÐâØ?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "½ØøÕ ßàÞÝÐòÕÝ ÞÔÓÞÒÐàÐøãûØ ÜÞÔ\n"
-#~ "¿ÞÚãèÐøâÕ áÐ ÔàãÓÞÜ ÓàÐäØçÚÞÜ ÚÐàâØæÞÜ ØÛØ ÜÞÝØâÞàÞÜ"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "°ãâÞÜÐâáÚÞ âàÐÖÕúÕ àÕ×ÞÛãæØøÕ"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-ÚÛØjÕÝâ"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB ¼Øè "
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB ¼Øè (2 âÐáâÕàÐ)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB ¼Øè (3+ âÐáâÕàÐ)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple ADB ¼Øè"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB ¼Øè (2âÐáâÕàÐ)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB ¼Øè (3+ âÐáâÕàÐ)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI ±ãá ¼Øè"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft  Bus ¼Øè"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech Bus ¼Øè"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB ¼Øè (3 âÐáâÕàÐ ØÛØ ÒØèÕ)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A ØÛØ ÝÞÒØøØ (áÕàØøáÚØ)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (áÕàØøáÚØ)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (áÕàØøáÚØ)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (áÕàØøáÚØ)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "³ÕÝÕàØçÚØ ÜØè (áÕàØøáÚØ)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft ÚÞÜßÐâØÑØÛÐÝ (áÕàØøáÚØ)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "³ÕÝÕàØçÚØ 3 âÐáâÕàÐ ÜØè (áÕàØøáÚØ)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (áÕàØøáÚØ)"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr ""
-#~ "¿ÞâàÕÑÝÞ jÕ ÚÞÝäØÓãàØáaúÕ ÜàeÖÝÞÓ ÐÔÐßâÕàa ÔÐ ÑØ áÕ ÜÞÓÛØ ÚÞÝÕÚâÞÒÐâØ ÝÐ "
-#~ "ØÝâÕàÝÕâ."
-
-#~ msgid ""
-#~ "Please choose which network adapter do you want to use to connect to "
-#~ "internet.\n"
-#~ "If you don't know, choose eth0.\n"
-#~ msgstr ""
-#~ "¸×ÐÑÕàØâÕ ÚÞjØ ÜàeÖÝØ ÐÔÐßâÕà ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ ×Ð ÚÞÝÕÚæØjãÝÐ "
-#~ "ØÝâÕàÝÕât.\n"
-#~ "ÃÚÞÛØÚÞ ÝÕ ×ÝÐâe, Ø×ÐÑÕàØâe eth0.\n"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "nfs ÜÞÝâØàÐúÕ ÝØøÕ ãáßÕÛÞ"
-
-#~ msgid "Socket"
-#~ msgstr "¿àØÚùãçÐÚ"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX ûÕ ÓÕÝÕàØáÐâØ ÚÞÝäØÓãàÐæØÞÝÕ äÐjÛÞÒe  ×a XFree 3.3 ÚÐÞ Ø ×a XFree "
-#~ "4.0.\n"
-#~ "¿Þ default-ã , 4.0 áÕàÒÕà áÕ ÚÞàØáâØ ÞáØÜ ÐÚÞ ÒaèÐ ÚÐàâØæÐ ÝØje "
-#~ "ßÞÔàÖÐÝa.\n"
-#~ "\n"
-#~ "´Ð ÛØ ÖÕÛØâÕ ÔÐ ×ÐÔàÖØâe  XFree 3.3?"
-
-#~ msgid "Cryptographic"
-#~ msgstr "ºàØßâÞÓàÐäáÚØ"
-
-#~ msgid "Configure LAN"
-#~ msgstr "ºÞÝäØÓãàØáÐúÕ LAN ÜàeÖe"
-
-#~ msgid "End configuration"
-#~ msgstr "ºàÐj ÚÞÝäØÓãàÐæØøe"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "½ÕÜÞj ßÞÔÕèÐÒÐâØ ÜàÕÖã"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "´Ð ÛØ ÖÕÛØâÕ ÔÐ ßÞÔÕáØâÕ ÛÞÚÐÛÝã ÜàÕÖã ×Ð ÒÐè áØáâÕÜ?"
-
-#~ msgid "Show less"
-#~ msgstr "¿àØÚÐÖØ Üaúe"
-
-#~ msgid "Show more"
-#~ msgstr "¿àØÚÐÖØ ÒØèe"
-
-#~ msgid "URI for Local printer"
-#~ msgstr "URI ØÛØ ÛÞÚÐÛÝØ  èâÐÜßÐç"
-
-#~ msgid "Local Printer Device (URI)"
-#~ msgstr "»ÞÚÐÛÝØ ãàÕòÐø ×Ð èâÐÜßÐç (URI)"
-
-#~ msgid ""
-#~ "What URI device is your printer connected to\n"
-#~ "(note that parallel:/dev/lp0 is equivalent to LPT1:)?"
-#~ msgstr ""
-#~ "½Ð ÚÞøØ URI ãàeòÐj øÕ ÒÐè èâÐÜßÐç ßÞÒÕ×ÐÝ \n"
-#~ "(ßÐàÐÛÕÛÝØ /dev/lp0 ÞÔÓÞÒÐàÐ LPT1:)?\n"
-
-#~ msgid "tie"
-#~ msgstr "ÚàÐÒÐâa"
-
-#~ msgid "brunette"
-#~ msgstr "æàÝÚa"
-
-#~ msgid "girl"
-#~ msgstr "ÔÕÒÞjÚa"
-
-#~ msgid "woman-blond"
-#~ msgstr "ßÛÐÒãèa"
-
-#~ msgid "automagic"
-#~ msgstr "°ãâÞÜÐÓØøÐ"
-
-#~ msgid "Network:"
-#~ msgstr "¼àÕÖÐ:"
-
-#~ msgid "Everything configured!"
-#~ msgstr "ÁÒÕ jÕ ÚÞÝäØÓãàØáÐÝÞ !"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "ºÞøã Òàáâã âÐáâÐâãàÕ ØÜÐâÕ?"
-
-#~ msgid "pptp alcatel"
-#~ msgstr "pptp alcatel"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "´Ð ÛØ ÔÐ âàÐÖØÜ PCMCIA ÚÐàâØæÕ ?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "´Ð ÛØ ÔÐ âàÐÖØÜ %s ãàÕòÐøÕ ?"
-
-#~ msgid "Small(%dMB)"
-#~ msgstr "¼ÐÛÞ (%dMB)"
-
-#~ msgid "Modem Configuration"
-#~ msgstr "KÞÝäØÓãàÐæØøa ÜÞÔÕÜa"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "´Ð ÛØ ÖÕÛØâÕ ÔÐ ßÞÔÕáØâÕ  dialup ÚÞÝÕÚæØjã ×Ð ÜÞÔÕÜ ×Ð ÒÐè áØáâÕÜ?"
-
-#~ msgid "Do you want to configure a ISDN connection for your system?"
-#~ msgstr "´Ð ÛØ ÖÕÛØâÕ ÔÐ ßÞÔÕáØâÕ ISDN ÚÞÝÕÚæØjã  ×Ð ÒÐè áØáâÕÜ?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "´Ð ÛØ ÔÐ âàÐÖØÜ PCI ãàÕòÐøÕ ?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "ÂàÐÖØÜ root ßÐàâØæØøã."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: ¾ÒÞ ÝØøÕ root ßÐàâØæØøÐ, Ø×ÐÑÕàØâÕ ÝÕÚã ÔàãÓã."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "¸×ÐÑÕàØâÕ ÚÞøã ßÐàâØæØøã ÖÕÛØâÕ ÔÐ ÚÞàØáØâÕ ÚÐÞ root ßÐàâØæØøã"
-
-#~ msgid "Autologin at startup"
-#~ msgstr "°ãâÞ ÛÞÓÞÒaúÕ ßàØ áâÐàâaúã áØáâÕÜa"
-
-#~ msgid "Autologin - Choose default user"
-#~ msgstr "°ãâÞ ÛÞÓÞÒaúÕ - Ø×ÐÑÕàØâÕ default (ÞáÝÞÒÝÞÓ) ÚÞàØáÝØÚa"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "½ÕÜÐâÕ ÝØøÕÔÝã Windows ßÐàâØæØøã!"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "½ÕÜÐâÕ ÜÕáâÐ ÝÐ ßÐàâØæØjØ ×Ð Lnx4win!"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# When possible cp437 accentuated letters can be used too.
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Dobrodosli u LILO starter operativnih sistema !\n"
-#~ "\n"
-#~ "Za prikaz mogucih opcija, pritisnite <TAB>.\n"
-#~ "\n"
-#~ "Za startanje jedne od njih, upisite njeno ime i pritisnite <ENTER>\n"
-#~ "ili sacekate %d sekundi za startanje pretpostavljenog OS-a.\n"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# When possible cp437 accentuated letters can be used too.
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Dobrodosli u SILO, menadzer zÐ startanje operativnih sistema !\n"
-#~ "\n"
-#~ "Za prikaz mogucih opcija, pritisnite <TAB>.\n"
-#~ "\n"
-#~ "Za startanje jedne od njih, upisite njeno ime i pritisnite <ENTER>\n"
-#~ "ili sacekate %d sekundi za startanje pretpostavljenog OS.\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "SILO ÓÛÐÒÝÕ ÞßæØøÕ"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "¾ÒÞ áã ßÞáâÐÒùÝÕ ÞßæØøÕ ã SILO-ã.\n"
-#~ "¼ÞÖÕâÕ ÔÞÔÐâØ ÝÞÒÕ ØÛØ Ø×ÜÕÝØâØ áâÐàÕ."
-
-#~ msgid "This label is already in use"
-#~ msgstr "¾ÒÐ Þ×ÝÐÚÐ øÕ ÒÕû ã ãßÞâàÕÑØ"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "¸ÝáâÐÛÐæØøÐ SILO-Ð ÝÕãáßÕÛÐ. ³àÕèÚÐ øÕ:"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX ûÕ ßàÒÞ ßÞâàÐÖØâØ øÕÔÐÝ ØÛØ ÒØèÕ PCI\n"
-#~ "SCSI ÐÔÐßâÕà(Ð). ÃÚÞÛØÚÞ ÓÐ(Øå) ßàÞÝÐòÕ Ø ØÜÐ ÔàÐøÒÕà(Õ)\n"
-#~ "×Ð úØå, ÐãâÞÜÐâáÚØ ûÕ Øå ØÝáâÐÛØàÐâØ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ÃÚÞÛØÚÞ øÕ ÒÐè SCSI ÐÔÐßâÕà ISA, ØÛØ øÕ PCI ÐÛØ DrakX ÝØøÕ ÜÞÓÐÞ\n"
-#~ "ÞÔàÕÔØâØ ÞÔÓÞÒÐàÐøãûØ ÔàÐøÒÕà, ØÛØ ãÚÞÛØÚÞ ãÞßèâÕ ÝÕÜÐâÕ SCSI,\n"
-#~ "ÑØûÕâÕ ãßØâÐÝØ ÔÐ ÛØ Øå ØÜÐâÕ. ÃÚÞÛØÚÞ Øå ÝÕÜÐâÕ, ÞÔÓÞÒÞàØâÕ áÐ \"½Õ\".\n"
-#~ "ÃÚÞÛØÚÞ Øå ØÜÐâÕ øÕÔÐÝ ØÛØ ÒØèÕ, ÞÔÓÞÒÞàØâÕ áÐ \"´Ð\". ´ÞÑØûÕâÕ ßÞßØá\n"
-#~ "ÔàÐøÒÕàÐ, Ø× ÚÞøÕÓ ûÕâÕ Ø×ÐÑàÐâØ øÕÔÐÝ.\n"
-#~ "\n"
-#~ "\n"
-#~ "½ÐÚÞÝ èâÞ Ø×ÐÑÕàÕâÕ ÔàÐøÒÕà, DrakX ûÕ ÒÐá ßØâÐâØ ÔÐ ÛØ ÖÕÛØâÕ\n"
-#~ "áßÕæØäØæØàÐâÕ ÞßæØøÕ ×Ð úÕÓÐ. ¿àÒÞ, ÔÞ×ÒÞÛØâÕ ÔÐ ÔàÐøÒÕà ØáßØâÐ\n"
-#~ "åÐàÔÒÕà: âÞ ÞÑØçÝÞ ãáßÕ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ÃÚÞÛØÚÞ âÞ ÝØøÕ áÛãçÐø, ßàÕÓÛÕÔÐøâÕ ÔÞÚãÜÕÝâÐæØøã ØÛØ ßÞÔÐâÚÕ ßàÕã×ÜØâÕ\n"
-#~ "Ø× Windows-Ð ÐÚÞ ÓÐ ØÜÐâÕ ÝÐ àÐçãÝÐàã, ßÐ ÝÐÔÐùÕ áÐ âØÜ ßÞÔÐæØÜÐ\n"
-#~ "ßàÞáÛÕÔØâÕ ÔàÐøÒÕàã."
-
-#~ msgid "Shutting down"
-#~ msgstr "³ÐáØÜ ÜÐèØÝã"
-
-#~ msgid "useless"
-#~ msgstr "ÑÕáÚÞàØáÝÞ"
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "´Ð ÛØ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ LILO ?"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "¼ÞÖÕâÕ Ø×ÐÑàÐâØ ßÐÚÕâÕ ÚÞøÕ ÖÕÛØâÕ ØÝáâÐÛØàÐâØ.\n"
-#~ "\n"
-#~ "\n"
-#~ "¿àÒÞ ÜÞÖÕâÕ ÑØàÐâØ ÔÐ ÛØ ÖÕÛØâÕ ßãÝã ØÝáâÐÛÐæØøã ØÛØ ßàÕØÝáâÐÛÐæØøã\n"
-#~ "ÝÐ ßÞáâÞøÕûã. ½ÐÚÞÝ âÞÓÐ ÑØàÐâÕ ßÐÚÕâÕ ã×ØÜÐøãûØ ã ÞÑ×Øà ãÚãßÝã ÒÕÛØçØÝã\n"
-#~ "ÞÔÐÑàÐÝÞÓ.\n"
-#~ "\n"
-#~ "\n"
-#~ "°ÚÞ áÕ ÝÐÛÐ×ØâÕ ã ÕÚáßÕàâ ÜÞÔã, ßÐÚÕâÕ ÑØàÐâÕ ßÞøÕÔØÝÐçÝÞ.\n"
-#~ "Ã×ÜØâÕ ã ÞÑ×Øà ÔÐ ÝÕÚØ ßÐÚÕâØ ×ÐåâÕÒÐøã ØÝáâÐÛÐæØøã ÔàãÓØå,\n"
-#~ "ßÐ ûÕ Ø ÞÝØ ÑØâØ ÐãâÞÜÐâáÚØ ØÝáâÐÛØàÐÝØ."
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (Linux áâÐàâÕà) ÜÞÖÕ áâÐàâÐâØ Linux ÚÐÞ Ø ÔàãÓÕ ÞßÕàÐâØÒÝÕ áØáâÕÜÕ.\n"
-#~ "¾ÝØ áÕ ÞÑØçÝÞ ØáßàÐÒÝÞ ÔÕâÕÚâãøã ßàØ áÐÜÞø ØÝáâÐÛÐæØøØ. ÃÚÞÛØÚÞ ÝÕ,\n"
-#~ "ÜÞÖÕâÕ Øå áÐÔÐ ÔÞÔÐâØ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ÃÚÞÛØÚÞ ½µ ÖÕÛØâÕ ÔÐ áÒÐÚÞ ÜÞÖÕ ÔÐ ØÜ ßàØáâãßØ, ÜÞÖÕâÕ ÓÐ ãÚÛÞÝØâØ áÐÔÐ.\n"
-#~ "(·Ð ßÞÔØ×ÐúÕ áØáâÕÜÐ ûÕ ÒÐÜ âÐÔÐ ÑØâØ ßÞâàÕÑÝÐ áâÐàâÝÐ ÔØáÚÕâÐ)."
-
-#~ msgid ""
-#~ "Now that you've selected desired groups, please choose \n"
-#~ "how many packages you want, ranging from minimal to full \n"
-#~ "installation of each selected groups."
-#~ msgstr ""
-#~ "ÁÐÔÐ ÚÐÔÐ áâÕ Ø×ÐÑàÐÛØ ÓàãßÕ,Ø×ÐÑÕàØâÕ \n"
-#~ "ÚÞÛØÚÞ ßÐÚÕâÐ ÖÕÛØâÕ,ÑØàÐjãûØ ÞÔ ÜØÝØÜÐÛÝÕ ÔÞ ÜÐÚáØÜÐÛÝe\n"
-#~ "ØÝáâÐÛÐæØjÕ áÒÐÚÕ ÞÔÐÑàÐÝÕ ÓàãßÕ."
-
-#~ msgid ""
-#~ "You need %dMB for a full install of the groups you selected.\n"
-#~ "You can go on anyway, but be warned that you won't get all packages"
-#~ msgstr ""
-#~ "¼ÞàÐâÕ ØÜÐâØ %dMB ×Ð ßãÝã ØÝáâÐÛÐæØjã ÓàãßÐ ÚÞjÕ áâÕ Ø×ÐÑàÐÛØ.\n"
-#~ "¼ÞÖÕâÕ Ø  ÝÐáâÐÒØâØ,ÐÛØ ×ÝÐjâÕ ÔÐ ÝeûÕâÕ ØÜÐâØ áÒÕèâÞ jÕ Ø×ÐÑàÐÝÞ."
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "¸×ÐÑÕàØ ÔàãÓØ CD ×Ð ØÝáâÐÛÐæØøã"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "¸×ÐÑÕàØâÕ:\n"
-#~ "\n"
-#~ " - ¿àÕßÞàãçÕÝÞ: ÃÚÞÛØÚÞ ÝØáâÕ ÔÞ áÐÔÐ ØÝáâÐÛØàÐÛØ Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ " - ÁÐ ßÞÔÕèÐÒÐúØÜÐ (Customized): ÃÚÞÛØÚÞ áâÕ ãßÞ×ÝÐâØ áÐ »ØÝãÚáÞÜ ÜÞûØ "
-#~ "ûÕâÕ\n"
-#~ "ÔÐ Ø×ÐÑÕàÕâÕ ÝÞàÜÐÛ,ÔÕÒÕÛÞßÜÕÝâ ØÛØ áÕàÒÕà ÜÞÔ ØÝáâÐÛÐæØøÕ.\n"
-#~ "¸×ÐÑÕàØâÕ \"½ÞàÜÐÛ\" ØÝáâÐÛÐæØøã ßàØ ãÞÑØçÐøÕÝÞÜ ÚÞàØèûÕúã àÐçãÝÐàÐ\n"
-#~ "¼ÞÖÕâÕ Ø×ÐÑàÐâØ \"´ÕÒÕÛÞßÜÕÝâ\" ØÝáâÐÛÐæØøã ãÚÞÛØÚÞ ûÕâÕ áÕ ßàÒÕÝáâÒÕÝÞ\n"
-#~ "àÐ×ÒÞøÕÜ áÞäâÒÕàÐ, ØÛØ \"ÁÕàÒÕà\" ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ßÞáâÐÒØâÕ áâÐÝÔÐàÔÝã\n"
-#~ "áÕàÒÕà ÜÐèØÝã (×Ð ÜÐØÛ, èâÐÜßÐúÕ...)\n"
-#~ "\n"
-#~ "\n"
-#~ " - µÚáßÕàâ: ÃÚÞÛØÚÞ áâÕ ÔÞÑàÞ ßÞ×ÝÐøâÕ GNU/Linux Ø ÖÕÛØâÕ Ø×ã×ÕâÝÞ\n"
-#~ "ßÞÔÕáØÒã ØÝáâÐÛÐæØøã ÞÝÔÐ øÕ ÞÒÞ ßàÐÒØ ÜÞÔ ×Ð ÒÐá. ¼ÞûØ ûÕâÕ Ø×ÐÑàÐâØ\n"
-#~ "ÚÞàØèûÕúÕ áØáâÕÜÐ ÚÐÞ \"¿àÕßÞàãçÕÝÞ\"."
-
-#~ msgid "Setup SCSI"
-#~ msgstr "¿ÞÔÕáØ SCSI"
-
-#~ msgid "Installation CD Nr %s"
-#~ msgstr "¸ÝáâÐÛÐæØøÐ CD ±à.%s"
-
-#~ msgid ""
-#~ "Update installation image!\n"
-#~ "\n"
-#~ "Ask your system administrator or reboot to update your installation image "
-#~ "to include\n"
-#~ "the Cd-Rom image labelled \"%s\". Press Ok if image has been updated or "
-#~ "press Cancel\n"
-#~ "to avoid installation from this Cd-Rom image."
-#~ msgstr ""
-#~ "½ÐßàÐÒØâÕ update ØÝáâÐÛÐæØÞÝÞÓ image-a!\n"
-#~ "¿ØâÐjâÕ áØáâÕÜ ÐÔÜØÝØáâàÐâÞàÐ ØÛØ àÕÑãâãjâÕ àÐÔØ  update ØÝáâÐÛÐæØÞÝÞÓ  "
-#~ "image-aàÐÔØ  Cd-Rom image-a Þ×ÝaçÕÝÞÓ áÐ  \"%s\".¿àØâØáÝØâÕ ¾k ãÚÞÛØÚÞ jÕ "
-#~ "image update-ÞÒÐÝ ØÛØ ßàØâØáÝØâÕ  Cancel\n"
-#~ "×a ßàÕÚØÔ ØÝáâÐÛÐæØjÕ Cd-Rom image-a."
-
-#~ msgid "Which language do you want?"
-#~ msgstr "ºÞøØ øÕ×ØÚ ÖÕÛØâÕ ?"
-
-#~ msgid "Hurt me plenty"
-#~ msgstr "ÀÐ×ÑØj Üe"
-
-#~ msgid "Which packages do you want to install"
-#~ msgstr "¸×ÐÑÕàØ ßÐÚÕâÕ ×Ð ØÝáâÐÛÐæØøã"
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "ÁÚØÔÐÜ ÚàØßâÞ ßÐÚÕâÕ"
-
-#~ msgid "Local LAN"
-#~ msgstr "»ÞÚÐÛÝa ÜàÕÖÐ LAN"
-
-#~ msgid "Installation CD Nr 1"
-#~ msgstr "¸ÝáâÐÛÐæØÞÝØ  CD ±à. 1"
-
-#~ msgid "expert"
-#~ msgstr "ÕÚáßÕàâ"
-
-#~ msgid "developer"
-#~ msgstr "ÔÕÒÕÛÞßÕà"
-
-#~ msgid "beginner"
-#~ msgstr "ßÞçÕâÝØÚ"
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "ºÞàØáâØ ÛØÝÕÐàÝØ ÜÞÔ (ßÞâàÕÑÐÝ ÝÕÚØÜ SCSI ÔàÐøÒÞÒØÜÐ)"
-
-#~ msgid "linear"
-#~ msgstr "ÛØÝÕÐà"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "¿ÞáÛÕ %s ßÐàâØæØøÐ %s,"
-
-#~ msgid "changing type of"
-#~ msgstr "ÜÕúÐúÕ âØßÐ"
-
-#~ msgid "formatting"
-#~ msgstr "äÞàÜÐâØàÐúÕ"
-
-#~ msgid "resizing"
-#~ msgstr "ßàÞÜÕÝÐ ÒÕÛØçØÝÕ"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "²ÕÛØçØÝÐ: %s MB"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "¿ÞÓàÕèÐÝ kickstart ÔÐâÞâÕÚa %s (ÝØøÕ ãáßÕÞ %s)"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr "¸ÝáâÐÛØàÐûã %d MB. ¼ÞÖÕâÕ Ø×ÐÑàÐâØ ÔÐ ØÝáâÐÛØàÐâÕ øÞè ßàÞÓàÐÜÐ"
-
-#~ msgid "Password:"
-#~ msgstr "»Þ×ØÝÚÐ:"
-
-#~ msgid "User name:"
-#~ msgstr "ºÞàØáÝØçÚÞ ØÜe:"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "ÃÑÐæØâÕ ÔØáÚÕâã ã ãàÕòÐø ×Ð ÚàÕØàaúÕ  HTP boot ÔØáÚÕâe\n"
-#~ "(ÁÒØ ßÞÔÐæØ ÝÐ ÔØáÚÕâØ ûÕ ÑØâØ Ø×ÑàØáÐÝØ !)"
-
-#~ msgid "A entry %s already exists"
-#~ msgstr "ÃÝÞá %s ÒÕû ßÞáâÞøØ"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "¸ÝáâÐÛÐæØøÐ ØÛØ ÐÖãàØàÐúÕ"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "¸×ÐÑÕàØâe ÚÞÙÕ ÚÞàØèûÕúÕ ÖÕÛØâe"
diff --git a/perl-install/share/po/sr.po b/perl-install/share/po/sr.po
deleted file mode 100644
index 8b7126d7f..000000000
--- a/perl-install/share/po/sr.po
+++ /dev/null
@@ -1,11752 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999,2000,2001 Mandrakesoft
-# Jankovic Tomislav <tomaja@net.yu> 1999,2000,2001
-#
-#
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-08-12 13:12GMT+1\n"
-"Last-Translator: Toma Jankovic_<tomaja@net.yu>\n"
-"Language-Team: SERBIAN <office@mandrake.co.yu>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Podesi sve glave nezavisno"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Koristi Xinerama ekstenziju"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Podesi samo karticu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Multi-head konfiguracija"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Va¹ sistem podr¾ava multiple head konfiguraciju.\n"
-"Da li to ¾elte da uradite?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Grafièka kartica"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Izaberite karticu"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Izaberite X server"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Koju XFree konfiguraciju ¾elite da imate ?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹a kartica mo¾e imati 3D hardversku akceleraciju ali samo sa XFree %s.\n"
-"Va¹u karticu podr¾ava XFree %s koji mo¾e imati bolju podr¹ku i za 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Va¹a kartica mo¾e imati 3D hardversku akceleraciju sa XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s sa 3D hardverskom akceleracijom"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Va¹a kartica mo¾e imati 3D hardversku akceleraciju ali samo sa XFree %s,\n"
-"ZAPAMTITE da je ovo EKSPERIMENTALNA podr¹ka za 3D i mo¾e dovesti do "
-"blokiranja raèunara."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s sa EKSPERIMENTALNOM 3D hardverskom akceleracijom"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹a kartica mo¾e imati 3D hardversku akceleraciju ali samo sa XFree %s,\n"
-"ZAPAMTITE da je ovo EKSPERIMENTALNA podr¹ka za 3D i mo¾e dovesti do "
-"blokiranja raèunara.\n"
-"Va¹u karticu podr¾ava XFree %s koji mo¾e imati bolju podr¹ku i za 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (Instalacija displej drajver)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree konfiguracija"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Kolièina memorije na grafièkoj kartici"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Opcije za server"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Izaberite monitor"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Morate da navedete horizontalni sinhronizacioni opseg va¹eg monitora.\n"
-"Mo¾ete ga ili izabrati iz unapred zadatih vrednosti koje odgovaraju\n"
-"industrijskim standardima monitora, ili da navedete odreðeni opseg.\n"
-"\n"
-"VEOMA JE VA®NO da ne navedete tip monitora koji ima ovaj opseg veæi nego\n"
-"¹to ga ima va¹ monitor. Ako niste sigurni, odaberite manje vrednosti."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Horizontalna frekvencija"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Vertikalna frekvencija"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Monitor nije konfigurisan"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Grafièka karta jo¹ nije konfigurisana"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Rezolucija jo¹ nije izabrana"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Da li hoæete da testirate konfiguraciju?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Upozorenje: testiranje ove grafièke kartice mo¾e zamrznuti va¹ kompjuter"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Testiranje konfiguracije"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"poku¹ajte sa promenom parametara"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Hm, gre¹ka:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Izlaz za %d sekundi"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Da li je ovo ispravno pode¹eno?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Hm, pojavila se gre¹ka, probajte da promenite parametre"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Rezolucija"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Izaberite rezoluciju i broj boja pri prikazu"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafièka kartica: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Ekspertni mod"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Prika¾i sve"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Rezolucija"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tip tastature: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tip mi¹a: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Mi¹ je postavljen na ureðaj: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor - horizontalna frekvencija: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor - vertikalno osve¾avanje: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafièka kartica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafièka kartica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memorija na grafièkoj kartici: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Broj boja: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolucija: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 drajver: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Provera konfiguracije za X-Window sistem"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "©ta ¾elite da uradite?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Promena monitora"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Promena grafièke kartice"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Promena Server opcija"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Promena rezolucije"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Prika¾i informacije"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Testiraj ponovo"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Kraj"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Saèuvaj promene?\n"
-"Trenutna konfiguracija je:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Molim, ponovo unesite %s radi aktiviranja promena"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Molim va¹ izlogujte se i restartujte (Ctrl-Alt-BackSpace) raèunar"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X okru¾enje na startu"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ja mogu podesti va¹ raèunar da automatski podi¾e X okru¾enje pri startanju.\n"
-"Da li ¾elite X okru¾enje pri restartu ?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 boja (8-bitna paleta)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 hiljade boja (15-bitna paleta)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 hiljada boja (16-bitna paleta)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miliona boja (24-bitna paleta)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijarde boja (32-bitna paleta)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB ili vi¹e"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standardni VGA, 640x480 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompat., 1024x768 na 87 Hz sa preplitanjem (ne 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 na 87 Hz sa preplitanjem, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 na 60 Hz, 640x480 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA bez preplitanja, 1024x768 na 60 Hz, 800x600 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Visokofrekventni SVGA, 1024x768 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Monitor koji radi sa 1280x1024 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Monitor koji radi sa 1280x1024 na 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Monitor koji radi sa 1280x1024 na 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor koji radi sa 1600x1200 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor koji radi sa 1600x1200 na 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Prvi sektor startne particije"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Prvi sektor diska (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILO instalacija"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Gde biste da instalirate starter?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalacija"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO sa tekstualnim menijem"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO sa grafièkim menijem"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Startanje iz DOS/Windows-a (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Glavne opcije startera"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Starter koji æe se koristiti"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Instalacija startera"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Startni (boot) ureðaj"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne radi na starim BIOS-ima)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "kompakt"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Video mod"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Pauza pre startanja default image-a"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Lozinka"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Lozinka (ponovite)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Ogranièena komandna linika - opcije"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "ogranièeno"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Oèisti /tmp pri svakom startanju"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Defini¹i velièinu RAM ako je potrebno (detektovano je %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Omoguæi multi-profile"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Prika¾i velièinu RAM-a u Mb"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Opcija``Ogranièena komandna linika - opcije'' je neupotrebljiva bez lozinke"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Probajte ponovo"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Nepodudarnost lozinki"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Inicijalna poruka"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Otpoèni Firmware pauzu"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Pauza pri startanju kernela"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Omoguæi startanje sa CD-a?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Omoguæi OF startanje?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Podrazumevani OS ?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Ovo su postavljne opcije.\n"
-"Mo¾ete dodati nove ili izmeniti stare."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Dodaj"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Uraðeno"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Promeni"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Koju vrstu unosa dodajete ?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Drugi OS-ovi (SunOS,BSD,...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Drugi OS-ovi (MacOS,BSD,...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Drugi OS-ovi (Windows,BSD,BeOS,...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Slika"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Dodatak"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Èitanje-pisanje RW"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tabela"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Nesigurno"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Oznaka"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Podrazumevano"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-velièina"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Uklanjam unos"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Prazna oznaka nije dozvoljena"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Ova oznaka je veæ u upotrebi"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Pronaðeno  %s %s interfejsa"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Da li imate jo¹ jedan?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Imate li jo¹ %s interfejsa?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Da"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Pogledaj informacije o hardveru"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaliram drajver za %s karticu %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Koji %s drajver da probam?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"U nekim sluèajevima, drajver %s zahteva dodatne informacije\n"
-"za pravilan rad, mada mo¾e lepo da radi i bez njih. Da li hoæete\n"
-"sami da unesete dodatne podatke za njega, ili da ih drajver sam odredi?\n"
-"Moguæe je da æe proba zaglaviti va¹ raèunar, ali neæe naneti nikakvu ¹tetu."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Automatska proba"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Navedite opcije"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Mo¾ete navesti njegove opcije za modul %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Mo¾ete navesti njegove opcije za modul %s.\n"
-"Opcije su u formatu ``ime=vrednost ime2=vrednost2 ...''.\n"
-"Na primer, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Opcije modula:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Podizanje modula %s neuspelo.\n"
-"Da li ¾elite poku¹ate ponovo sa drugim parametrima ?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s veæ postoji)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Ova lozinka je previ¹e prosta"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Odredite korisnièko ime"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Korisnièko ime mo¾e sadr¾ati samo mala slova, brojeve, `-' i `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Ovo korisnièko ime veæ postoji"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Dodaj korisnika"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Unesi korisnika\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Prihvati korisnika"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Pravo ime"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Korisnièko ime"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Auto logovanje"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ja mogu podesti va¹ raèunar da automatski uloguje jednog korisnika.\n"
-"Ukoliko ne ¾elite da koristite ovu opciju, kliknite na  taster poni¹ti"
-"(cancel) ?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Izaberite default (osnovnog) korisnika:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Izaberite window menadzer koji ¾elite da koristite:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "IZaberite koji jezik ¾elite da korisitite:"
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "Mo¾ete izabrati drugi jezik koji æe biti dostupan posle instalacije "
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Sve"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Dobrodosli u %s, menadzer za startanje operativnih sistema !\n"
-"\n"
-"Izaberite operativni sistem, ili\n"
-"sacekate %d sekundi za startanje pretpostavljenog OS.\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Dobrodosli u GRUB  starter operativnog sistema !"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Koristi  %c i %c slova da bi oznacili izbor"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite enter za podizanje izabranog OS,'e' za promenu "
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandi pri  podizanju sistema,ili  'c' za komandnu liniju "
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Oznaceni izbor se podize automatski za %d sekundi"
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "nema dovoljno mesta u /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Start meni "
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Gde biste da instalirate starter?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pomoæ jo¹ nije implementirana.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfiguracija stila startanja"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Datoteka"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Monitor za kategorizaciju"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradicionalni Monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradicionalni Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Pokreni Auroru pri startanje"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Lilo/Grub mod"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Trenutno koristite %s kao Boot menad¾er \n"
-"Kliknite na Podesi (Configure) da bi pokrenuli pode¹avavanje."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Podesi"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Startni mod"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Sistemski mod"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Pokreni X-Window sistem pri stratanju"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Ne, ja ne ¾elim autologovanje"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Da, ja ¾elim autologovanje sa ovim(korisnik,desktop)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "U redu"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Obustavi"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ne mogu otvoriti /etc/inittab za èitanje: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Instalacija LILO-a neuspela. Gre¹ka je:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuta"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minut"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundi"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Molim vas, prvo napravite kopiju va¹ih podataka"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "PA®LJIVO PROÈITAJ !"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ukoliko planirate da koristite  aboot, ostavite prazan prostor (2048 "
-"sektorana poèetku \n"
-"diska)"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Gre¹ka"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "èarobnjak (pomoænik)"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Novi"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "Udaljeni red:"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Taèka montiranja"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Opcije"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Tip"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Demontiraj"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Montiraj"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Izaberite akciju"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Disk sadr¾i jednu veliku FAT particiju\n"
-"(uglavnom je koriste MicroSoft Dos/Windows-i, na ¾alost).\n"
-"Predla¾em da prvo izmenite veliènu (resize) te particije (kliknite na nju,\n"
-"a potom na \"Promeni velièinu\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Kliknite na particiju"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Kliknite na particiju"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "Kliknite na particiju"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Detalji"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "montiranje nije uspelo"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Prazno"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Drugo"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Vrsta fajl sistema:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Kreiraj"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Umesto toga probajte ``%s''"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Obri¹i"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Prvo uradite ``Demontiraj''"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Posle promene tipa particije %s, svi podaci na ovoj particiji æe biti "
-"izbrisani"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Gde biste da montirate %s ureðaj ?"
-
-#: ../../diskdrake.pm_.c:500
-#, fuzzy
-msgid "Mount options"
-msgstr "Opcije modula:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:525
-#, fuzzy
-msgid "Removable media"
-msgstr "Automontiranje prenosivih medija"
-
-#: ../../diskdrake.pm_.c:532
-#, fuzzy
-msgid "Change type"
-msgstr "Promena tipa particije"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Koju  datoteèni sistem ¾elite ?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Server"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Izaberite akciju"
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Kreiraj novu particiju"
-
-#: ../../diskdrake_interactive.pm_.c:188
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Preði na ekspert mod"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Preði na normalni mod"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Poni¹ti radnju"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Svejedno nastaviti ?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Kraj bez snimanja promena"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Kraj bez snimanja promena u tabele particija?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Da li hoæete da testirate konfiguraciju?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Auto dislociranje"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Oèisti sve"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Jo¹"
-
-#: ../../diskdrake_interactive.pm_.c:250
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Detekcija hard diska"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Nema dovoljno slobodnog prostora za eauto-alociranje"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Sve primarne particije su zauzete"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Ne mogu dodati vi¹e ni jednu particiju"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Da bi omoguæili kreiranje jo¹ (extended) particija izbri¹ite jednu od "
-"postojeæih"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Upi¹i tabelu particija"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Spasi tabelu particija"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Spasi tabelu particija"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Spasi tabelu particija"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Automontiranje prenosivih medija"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Izaberite datoteku"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Pohranjena(snimljena) tabela particija nije iste velièine\n"
-"®elite da nastavite ?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Upozorenje"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Ubacite disketu u ureðaj\n"
-"Svi podaci na disketi æe biti izbrisani !"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Spasavanje tabele particija"
-
-#: ../../diskdrake_interactive.pm_.c:340
-#, fuzzy
-msgid "Detailed information"
-msgstr "Prika¾i informacije"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Promeni velièinu"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Premesti"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formatiranje"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Aktiviraj"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Dodaj na RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Dodaj na LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Ukloni sa RAID-a"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Ukloni sa LVM-a"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Promeni RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Koristi za loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Kreiraj novu particiju"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Poèetni sektor: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Velièina u MB:"
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Vrsta tatoteènog sistema:"
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Taèka montiranja: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Karakteristike: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatiranje loopback datoteke %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Promena tipa particije"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "Menjam ext2 na ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Gde biste da montirate loopback datoteku  %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Demontiranje nije moguæe,jer se particija korisiti za loop back.\n"
-"Prvo uklonite loopback"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Proraèunavam granice FAT datoteènog sistema"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Promena velièine (resizing)"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Ovoj particici nije moguæe promeniti velièinu"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Cvi podaci na ovoj particiji bi trebali biti saèuvani"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Posle promene velièine %s particije svi podaci æe biti izbrisani"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Izaberite novu velièinu"
-
-#: ../../diskdrake_interactive.pm_.c:591
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Velièina u MB:"
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Koji disk ¾elite da premestite?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Gde ¾elite da instalirate starter?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Preme¹tanje"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Preme¹tanje particije..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Izaberi postojeæi RAID za dodavanje"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "novi"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Izaberi postojeæi LVM za dodavanje"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "LVM ime?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Ova particija ne mo¾e biti kori¹æena za loopback "
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Ime Loopback datoteke: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Pravo ime"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Fajl se veæ koristi od strane drugog loopback-a,izaberite drugi"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Datoteka veæ postoji.Da li da ga koristim ?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "ureðaj"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "nivo"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "chunk velièina"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "PA®LJIVO,ova operacija je opasna."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Koju vrstu particioniranja?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Nije moguæe kreirati /boot za sada na hard disku (na cilindru > 1024).\n"
-"Ili koristite LILO koji ne radi, ili ga ne koristite pa vam ne treba /boot"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Particija koju ste izabrali za root (/) je fizièki locirana iznad\n"
-"1024-tog cilindra hard diska,i nemate /boot particiju.\n"
-"Ukoliko planirate da korisitite LILO boot menad¾er, morate\n"
-"dodati /boot particiji."
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Izabrali ste softversku RAID particiju kao root (/).\n"
-"Nijedan starter ne mo¾e da radi sa tim bez /boot particije.\n"
-"Zato pazite da dodate /boot particiju"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Tabela particija za ureðaj %s æe biti zapisana na disk!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Morate restartovati raèunar da bi se izmene izvr¹ile"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Posle formatiranja particije %s,svi podaci na ovoj particiji æe biti "
-"izbrisani"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Formatiranje"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatiranje loopback datoteke %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiranje particije %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid neuspelo"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Nema dovoljno slobodnog prostora za alociranje novih particija"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Nema dovoljno slobodnog prostora za alociranje novih particija"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Rezolucija: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Ureðaj: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Oznaka DOS particije: %s (samo pretpostavka)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Unesi: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Ime: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Poèetak: sektor %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Velièina: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektora"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Cilindar %d do cilindra %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Formatirano\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Nije formatirano\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Montirano\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback fajl(ovi): %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Boot particija po default-u\n"
-"   (za podizanje MS-DOSa, ne za lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivo %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Chunk-uj %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskovi %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Ime Loopback datoteke: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Najverovatnije je, da je ova particija\n"
-"Driver particija, pa nebi trebali\n"
-"da je dirate.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ovo je specijalna Bootstrap\n"
-"particija i koristi se\n"
-"dual-booting va¹eg sistema.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Velièina: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskovi %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tip tabele particija : %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na busu %d ID %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Opcije: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s Formatiranje  %s nije uspelo"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ne znam kako da formatiram %s u tipu %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "montiranje nije uspelo"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck provera nije uspela sa kodom %d ili signalom %d"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "montiranje nije uspelo: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "Gre¹ka pri demontiranju %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jednostavno"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Ne mo¾ete koristiti JFS za particije manje od 16MB"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Ne mo¾ete koristiti ReiserFS za particije manje od 32MB"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Taèke montiranja moraju da poèinju sa vodeæim /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Veæ postoji particija sa taèkom montiranja %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ne mo¾ete koristiti logièku LVM particiju za taèku montiranja %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Ovaj direktorijum treba da ostane u root-u  datoteènog sistema"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Potreban vam je pravi datoteèni sistem (ext2, reiserfs) za ovu taèku "
-"montiranja\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Gre¹ka pri otvaranju %s za ispis: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Dogodila se gre¹ka - nije naðen ispravan ureðaj na kojem bi bili krerani "
-"novi datoteènog sistemi. Proverite va¹ hardver da vidite ¹ta je uzrok ovog "
-"problema."
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Nemate nijednu particiju!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Iznad se nalazi lista postojeæih Linux particija koje su detektovane\n"
-"na hard disku. Mo¾ete zadr¾ati izbor koji je napravio èarobnjak, jer je "
-"dobar za a\n"
-"op¹tu upotrebu. Ukoliko promenite izbor, morate bar izabrati root\n"
-"particiju (\"/\"). Nemojte da birate suvi¹e malu particiju jer neæete moæi "
-"da\n"
-"instalirate ovoljno softvera. Ukoliko ¾elite da podatke staviljate na "
-"posebnu particiju ,\n"
-"morate da izaberetei i \"/home\" (moguæe je ukoliko imate vi¹e od jedne\n"
-"Linux particije).\n"
-"\n"
-"\n"
-"Informacija: svaka particija je prikazana na sledeæi naèin: \"Ime\", "
-"\"Kapacitet\".\n"
-"\n"
-"\n"
-"\"Ime\" je kodirano na sledeæi naèin: \"tip hard diska\", \"broj hard diska"
-"\",\n"
-"\"proj particije\" (na primer, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tip hard diska\" je \"hd\" ukoliko je hard disk IDE ureðaj i  \"sd\"\n"
-"ukoliko je SCSI hard disk.\n"
-"\n"
-"\n"
-"\"Broj hard diska\" je uvek slovo posle \"hd\" ili \"sd\". Sa IDE hard "
-"diskovima:\n"
-"\n"
-"   * \"a\" znaèi  \"master hard disk na primarnom  IDE kontroleru\",\n"
-"\n"
-"   * \"b\" znaèi \"slave hard disk na primarnom IDE kontroloeru\",\n"
-"\n"
-"   * \"c\" znaèi \"master hard disk na sekundranom IDE kontroloeru\",\n"
-"\n"
-"   * \"d\" znaèi \"slave hard disk na sekundarnom IDE kontroleru\".\n"
-"\n"
-"\n"
-"Sa SCSI hard diskovima, a \"a\" znaèi \"primarni hard disk\", a \"b\" znaèi "
-"\"sekundarni hard disk \", itd..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Sada mo¾ete odabrati koje servise ¾elite da se startaju pri podizanju "
-"sistema.\n"
-"\n"
-"\n"
-"Kada mi¹om preðete preko oznake servisa, pojaviæe se mali balon za pomoæ "
-"koji \n"
-"opisuje ulogu servisa.\n"
-"\n"
-"\n"
-"Budite posebno pa¾ljivi u ovom koraku ukoliko nameravate da korisite ma¹inu "
-"kao\n"
-"server: verovatno æe te ¾eleti da ne startujete\n"
-"bilo koji servis koji\n"
-"ne ¾elite."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux radi sa u GMT (Greenwich Manage Time) i prevodi u lokalno\n"
-"uzavisnosti koju ste vremensku zonu odabrali."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-#, fuzzy
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"U ovom trenutku, morate da izaberete gde æete instalirati\n"
-"Mandrake Linux operativni sistem na va¹ hard disk. Ukoliko je prazan ili\n"
-"postojeæi operativni sistem koristi sav postojeæi prostor na disku, treba da "
-"ga\n"
-"particionirate. U osnovi, particioniranje hard diska se sastoji logièkog\n"
-"deljenja da bi obezbedili prostor za instalaciju va¹ novi Mandrake Linux "
-"sistem.\n"
-"\n"
-"\n"
-"Po¹to se efekti procesa particioniranja obièno nepovratni,\n"
-"particionirnje mo¾e biti prilièno stresan za neiskusne korisnike.\n"
-"Ovaj èarobnjak pojednostavljuje ovaj proces. Pre poèetka, "
-"konsultujteupustvo\n"
-"i ne ¾urite.\n"
-"\n"
-"\n"
-"Morate da imate ili da kreirate najmanje dve particije. Jedna je za sam "
-"operativni sistem adruga\n"
-"je za virtuelnu memoriju (èesto se naziva i Swap).\n"
-"\n"
-"\n"
-"Ukoliko su particije veæ kreirane (od predhodne instalacije ilikreirane\n"
-"drugim alatom za particioniranje), morate izabrati na koje od njih "
-"æeteinstalirati \n"
-"Linux sistem.\n"
-"\n"
-"\n"
-"Ukoliko particije nisu definisane, marate da ih kreirate. \n"
-"Da bi to uradili, mo¾ete da koristite gore postavljeni èarobnjak. U "
-"zavisnosti id konfiguracije\n"
-"hard diska, postoji nekoliko moguænosti:\n"
-"\n"
-"* Koristite postojeæe particije: èarobnjak je detektovao jednu ili vi¹e "
-"postojeæihLinux particija na va¹em hard disku. Ukoliko\n"
-"  ¾elite da ih zadr¾ite, izaberite ovu opciju.\n"
-"\n"
-"\n"
-"* Brisanje celog diska: ukoliko ¾elite da izbri¹ete sve podatke i sve "
-"particije koji postoje na va¹em hard disku i zamenite ih va¹im\n"
-"  novim Mandrake Linux sistemom, mo¾ete da izaberete ovu ociju. Budite "
-"pa¾ljivisa ovom opcijom, jer neæete biti u moguænosti\n"
-"  da povratite staro stanje nakon potvrde.\n"
-"\n"
-"\n"
-"* Koristite slobodan prostor na Windows particiji: ukoliko je Microsoft "
-"Windowsinstaliran na hard disku i zauzima\n"
-"  sav prostor, morate da kreirate slobodan prostor za Linux. Da bi to "
-"uradili morate izbrisati\n"
-"  Microsoft Windows particiju i podatke (pogledaj \"Brisanje celog diska\" "
-"ili \"Ekspertni mod\" re¹enja) ili da promenite velièinu\n"
-"  Microsoft Windows particije. Taj postupak se mo¾e izvesti bez "
-"gubljenjapodataka. Ovo re¹enje se preporuèuje\n"
-"  ukoliko ¾elite da koristite Mandrake Linux i Microsoft Windows naistom "
-"kompjuteru.\n"
-"\n"
-"\n"
-"  Pre nego izaberete ovu opciju, morate znati da æe velièinaMicrosoft\n"
-"  Windows particije biti manja nego ¹to je sada. To znaèi daæete imati manje "
-"prostora pod\n"
-"  Microsoft Windows-om za podatke ili instalaciju novog softvera.\n"
-"\n"
-"\n"
-"* Ekspertni mod: ukoliko ¾elite da ruèno particionirate hard disk, mo¾eteda "
-"izaberete ovu opciju. Budite pa¾ljivi pre nego\n"
-"  izaberete ovu pociju. ¹er je ovo dobra ali i opasna stvar. Mo¾etelako "
-"izgubiti sve podatke. Dakle,\n"
-"  nemojte birati ovu opciju ukoliko ne znate ¹ta radite."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Svaka particija koja je novodefinisana mora biti\n"
-"formatirana za uptrebu (formatiranje znaèi kreiranje datoteènog(fajl) "
-"sistema).\n"
-"\n"
-"\n"
-"Sada mo¾da ¾elite da reformatirate postojeæe particije da bi izbrisali\n"
-"podatke koje sadr¾e. Ukoliko ¾elite to, izaberite particije \n"
-"koje ¾elite da formatizujete.\n"
-"\n"
-"\n"
-"Zapamtite da nije potrebno da reformatirate sve postojeæe particije.\n"
-"Morate da reformatirate particije koje sadr¾e operativni sistem (kao ¹to su "
-"\"/\",\n"
-"\"/usr\" ili  \"/var\") ali ne morate da reformatirate particije koje sadr¾e "
-"podatke\n"
-"koje ¾elite da zadr¾ite (obièno /home).\n"
-"\n"
-"\n"
-"Pazite pri biranju particija, posle formatiranja, sv podaci æe \n"
-"biti izbrisani i neæete ih moæi povratiti.\n"
-"\n"
-"\n"
-"Kliknite na \"U redu\" kada budete spreni za formatiranje particija.\n"
-"\n"
-"\n"
-"Kliknite na  \"Poni¹ti\" ukoliko ¾elite da izabereete druge particije za "
-"instalaciju novog\n"
-"Mandrake Linux operativnog sistema."
-
-#: ../../help.pm_.c:376
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Va¹ novi Mandrake Linux operativni sistem se trenutno\n"
-"instalira. Ova operacija bi trebala da potraje nekoliko minuta (u zavisnosti "
-"od velièine\n"
-"paketa koji se instaliraju i brzine va¹eg kompjutera).\n"
-"\n"
-"\n"
-"Molim Vas za strpljenje.Hvala."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-#, fuzzy
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Na ovoj taèki, morate izbrati koju\n"
-"particiju(e) ¾elite da koristite za instalaciju novog Mandrake Linux "
-"sistema. Ukoliko su particije\n"
-"veæ definisane (od predhodne instalacije ili od strane\n"
-"drugog alata za particije), mo¾ete da koristite postojeæe particije. U "
-"drugim sluèajevima,\n"
-"hard disk particije moraju biti definisane.\n"
-"\n"
-"\n"
-"Da bi kreirali particije, morate prvo izabrati hard disk. Mo¾ete izabrati "
-"pravi\n"
-"disk za particioniranje klikom na \"hda\" za prvi IDE disk, \"hdb\" ili \n"
-"za drugi ili \"sda\" za prvi SCSI disk itd.\n"
-"\n"
-"\n"
-"Za particioniranje selektovanog hard diska, mo¾ete koristiti sledeæe "
-"opcije:\n"
-"\n"
-"   * Oèisti sve: ova opcija bri¹e sve particije na izabranom hard disku.\n"
-"\n"
-"\n"
-"   * Auto alociranje:: ova opcija dozvoljava da automatski kreirate  Ext2 i "
-"swap particije na slobodnom prostoru \n"
-"     hard diska.\n"
-"\n"
-"\n"
-"   * Spasi tabelu particija: ukoliko je va¹a tabela particija o¹teæena, "
-"mo¾ete da probate da je oporavite koristeæi ovu opciju. Budite\n"
-"     pa¾ljivi i znajte da mo¾e da i ne uspe.\n"
-"\n"
-"\n"
-"   * Vrati na staro: ova opcija æe poni¹titi izmenu.\n"
-"\n"
-"\n"
-"   * Ponovno uèitavanje: ovu opciju mo¾ete koristiti ukoliko ¾elite da "
-"poni¹titisve promene i uèitate inicijalnu tabelu particija\n"
-"\n"
-"\n"
-"   * èarobnjak: ukoliko ¾elite da koristite èarobnjaka za particioniranje "
-"hard diska, izaberite ovu opciju. Preporuèena je ukoiko\n"
-"     nemate mnogo znanja o partcijama.\n"
-"\n"
-"\n"
-"   * Povrati sa diskete: ukoliko ste snimili tabelu particija na disketu  "
-"tokom prethodne instalacije, mo¾ete je\n"
-"     vratiti sa ovom opcijom.\n"
-"\n"
-"\n"
-"   * Snimi na disketu: ukoliko ¾elite da da snimite tabelu particija na "
-"disketu da bi mogli kasnije da je povratite, mo¾ete da iskoristite\n"
-"     ovu opciju. Naroèito preporuèujemo ovu opciju\n"
-"\n"
-"\n"
-"   * Uraðeno: kada zavr¹ite sa particioniranjem hard diska, iskoristite ovu "
-"opciju da bi snimili promene.\n"
-"\n"
-"\n"
-"Za vi¹e informacija, mo¾ete za svaku ocpiju  dobiti kretanjem pomoæu "
-"tastature: navigacijom kroz particije pomoæu Tab tastera i Up/Down "
-"strelica.\n"
-"\n"
-"\n"
-"Kada je particija izabrana, mo¾ete koristiti:\n"
-"\n"
-"           * Ctrl-c za kreiranje nove particije (kada je izabrana prazna "
-"particija)\n"
-"\n"
-"           * Ctrl-d za brisanje particije\n"
-"\n"
-"           * Ctrl-m za postavljanje taèke montiranja           \n"
-"\n"
-"           \n"
-"Ukoliko radite instalaciju na PPC Ma¹inu, mo¾da æete ¾eleti da kreirate malu "
-"HFS 'bootstrap' particiju od najmanje 1MB za upotrebu\n"
-"yaboot startera. Ukoliko se dvoumite da ovu particiju napravite malo veæom, "
-"na primer50MB, mo¾ete iskoristiti taj prostor za sme¹tanje \n"
-"rezervnog kernela i ramdisk image za startanje u hitnim situacijama."
-
-#: ../../help.pm_.c:460
-#, fuzzy
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Jedna ili vi¹e Microsoft Windows particija je detektovano \n"
-"na hard disku. Izaberite koju od njih ¾elite da smanjite da bi instalirali\n"
-"novi Mandrake Linux operativni sistem.\n"
-"\n"
-"\n"
-"Informacija: svaka particija je ispisana na sledeæi naèin: \"Ime Linux-a\", "
-"\"Ime\n"
-"Windows-a\" \"Kapacitet\".\n"
-"\n"
-"\"Ime Linux-a\" je kodirano na sledeæi naèin: \"tip hard diska\", \"broj "
-"hard diska\",\n"
-"\"broj particije\" (na primer, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tip hard diska\" je \"hd\" ukoliko je hard disk ID ureðaj i \"sd\"\n"
-"ukoliko je SCSI hard disk.\n"
-"\n"
-"\n"
-"\"Broj hard diska\" je uvek slovo posle \"hd\" ili \"sd\". Sa IDE hard "
-"diskovima:\n"
-"\n"
-"   * \"a\" znaèi  \"master hard disk na primarnom  IDE kontroleru\",\n"
-"\n"
-"   * \"b\" znaèi \"slave hard disk na primarnom IDE kontroloeru\",\n"
-"\n"
-"   * \"c\" znaèi \"master hard disk na sekundranom IDE kontroloeru\",\n"
-"\n"
-"   * \"d\" znaèi \"slave hard disk na sekundarnom IDE kontroleru\".\n"
-"\n"
-"\n"
-"Sa SCSI hard diskovima, a \"a\" znaèi \"primarni hard disk\", a \"b\" znaèi "
-"\"sekundarni hard disk \", itd.\n"
-"\n"
-"\n"
-"\"Ime Windows-a\" je slovo hard diska pod Windows-om (prvi diskdisk\n"
-"ili particija se zove \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Budite strpljivi.Trajanje ovih oeracija mo¾e biti nekoliko minuta"
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Izaberite  \"Instalacija\" ukoliko nema prethodne verzijeMandrake Linux\n"
-"koja je instalirana ili hoæete da koristite vi¹e operativnih sistema.\n"
-"\n"
-"\n"
-"Izaberite \"A¾uriranje\" ukoliko ¾elite da a¾urirate postojeæu verziju "
-"Mandrake Linux-a.\n"
-"\n"
-"\n"
-"U zavisnosti od va¹eg poznavanja GNU/Linux-a, mo¾ete izabrati jednu od "
-"sledeæih nivoa za instalaciju ili a¾uriranje\n"
-"Mandrake Linux operativnog sistema:\n"
-"\n"
-"* Preporuèeno: ukoliko niakada niste instalirali  GNU/Linux operativni "
-"sistem izaberite ovo. Instalacija æe biti\n"
-"  veoma laka i imaæete da odgovorite na svega nekoliko pitanja.\n"
-"\n"
-"\n"
-"* Sa pode¹avanjem(Customized): ukoiko vam je poznat GNU/Linux, mo¾ete "
-"izabrati primarnu namenu za koju koistite operativni sistem (radna stanica, "
-"server,\n"
-"  razvojna stanica). Moraæete da odgovorite na vi¹e pitanja nego uthan in "
-"\"Preporuèeno\" instalacionoj\n"
-"  klasi, tako da morate da bolje poznajete kako radi GNU/Linux da bi "
-"izabrali ovuinstalacionu klasu.\n"
-"\n"
-"\n"
-"* Ekspert: ukoliko iamte dobro znanje o GNU/Linux-u, mo¾ete izabrati ovu "
-"instalacionu klasu. Kao i \"Sa pode¹avanjem\"\n"
-"  instalacionoj klasi, moæi æete da birate primarnu namenu (radna stanica, "
-"server, razvojna stanica). Budite veoma\n"
-"  pa¾ljivi pre izbora ove instalacione klase. Moæi æete da izvodite veoma "
-"podesivu instalaciju.\n"
-"  Odgovori na neka pitanja mogu biti veoma te¹ki ukoliko nemate dobro znanje "
-"o GNU/Linux-u. Dakle, nemojte birati \n"
-"  ovu instalacionu kasu ukoliko ne znate ¹ta radite."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Molim, izaberite odgovarajuæi port. Na primer, COM1 port\n"
-"pod  MS Windows-om u Linux-u ima oznaku ttyS0."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) i  Grub su starteri: oni omoguæavaju da startate \n"
-"ili  Linux ili bilo koji  drugi  operativni sistem prisutan na va¹em "
-"kompjuteru.\n"
-"Naravno, ovi drugi operativni sistemi su ispravno detektovani i "
-"instalirani. \n"
-"Ukoliko to nije tako,mo¾ete to sami urediti ovde.Pazite kada unosite\n"
-"parametre\n"
-"\n"
-"\n"
-"Takoðe,mo¾ete ¾eleti da ostalim operat.sistemima onemoguæite da pristupe "
-"drugi \n"
-"U tom sluèaju, treba da izbri¹ete odgovarajuæe linije za te sisteme. Ali\n"
-"onda morate imati boot diskete da bi ih startali !"
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Morate oznaèiti gde ¾elite da postavite\n"
-"podatke potrebne za podizanje Linux-a.\n"
-"\n"
-"\n"
-"Ukoliko neznate taèno ¹ta radite,izaberite \"Prvi sektor\n"
-"diska (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX æe potra¾iti  PCI SCSI adapter(e).\n"
-"Ukoliko DrakX pronaðe SCSI adapter(e) i bude znao koji upravljaèki program "
-"(drajver) koristion æe ga(ih) automatski instalirati.\n"
-"\n"
-"\n"
-"Ukoliko nemate SCSI adapter, ili imate ISA SCSI adapter, ili  a\n"
-"PCI SCSI adapter koji DrakX ne mo¾e da prepozna on æe vas pitati\n"
-"da li imate SCSI adapter u  ma¹ini. Ukoliko nemate adapter\n"
-"samo kliknite na  'Ne'. Ukoliko kliknete na  'Da' pojaviæe se lista "
-"drajvera\n"
-"iz koje mo¾ete odabrati odgovarajuæi za va¹ adapter.\n"
-"\n"
-"\n"
-"Ukoliko morate ruèno da specificirate va¹ adapter, DrakX æe\n"
-"vas upitati da odredite opcije za njega.Treba li bi da dozvolite DrakX-u da\n"
-"ispita adapter radi tih opcija. Ovo obièno i uspe.\n"
-"\n"
-"\n"
-"Ukoliko ne, moraæete da sami odredite opcije za drajver.\n"
-"Pogledajte i Instalacioni vodiè za dodatna obja¹njenja ili\n"
-"iskorisitite svoju Windows instalaciju (ukoliko je imate na sistemu),\n"
-"dokumenatciju o hardveru, ili sa proizvoðaèevog \n"
-"veb sajta (ukoliko imate pristup internetu)."
-
-#: ../../help.pm_.c:720
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Mo¾ete dodati i dodatne unose za yabbot, ili za druge operativne ssisteme,\n"
-"alternativne kernele, ili za emergency boot image.\n"
-"\n"
-"\n"
-"Za druge OS-ove - unos sadr¾i samo oznaku i  root particiju.\n"
-"\n"
-"\n"
-"Za Linux, postoji nekoliko moguænosti: \n"
-"\n"
-"\n"
-"  - Oznaka: Ovo je jednostavno ime koje æete ukucati pri yaboot promptu da "
-"bi izabrali ovu \n"
-"startnu opciju.\n"
-"\n"
-"\n"
-"  - Image: Ovo je ime kernela koji se startuje.  Obièno vmlinux ili \n"
-"varijacija vmlinux sa ekstenzijom.\n"
-"\n"
-"\n"
-"  - Root: root ureðaj ili '/' za va¹u Linux instalaciju.\n"
-"\n"
-"\n"
-"  \n"
-"  - Dodatak: Na Apple hardveru, kernelova opcija se koristi za prilièno "
-"èesto da\n"
-"asistira inicijalizaciju video hardvera, ili da omoguæi emulaciju tastera za "
-"mi¹ na tastaturi zbog \n"
-"èestog nedostatka drugog i treæeg tastera na Apple mi¹evima.  Sledi par \n"
-"primera:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: Ova opcija se mo¾e koristiti ili za podizanje inicijalnih "
-"modula, pre nego je boot \n"
-"ureðaj dostupan, ili za podizanje ramdisk image za startanje u "
-"hitnimsituacijama.\n"
-"\n"
-"\n"
-"  - Initrd-velièina: velièina default ramdisk je generalno 4096 bajta.  "
-"Ukoliko vam treba\n"
-"alociranje velikog ramdisk-a, ova opcija mo¾e biti korisna.\n"
-"\n"
-"\n"
-"  - Read-write: Normalno se 'root' particija inicijalno postavlja kao read-"
-"only, da bi omoguæila\n"
-"proveru datoteènog sistema pre nego sistem postane 'aktivan'.  Ovde mo¾ete "
-"poni¹titi ovu opciju.\n"
-"\n"
-"\n"
-"  - NoVideo: Ukoliko se Apple video hardver poka¾e veoma problematiènim, "
-"mo¾ete\n"
-"izabrati ovu opciju da bi startali sistem u 'novideo' modu, sa osnovnom "
-"framebuffer podr¹kom.\n"
-"\n"
-"\n"
-"  - Default: Kako je ovo default Linux selekcija, dovoljno je da samo\n"
-"pritisnete ENTER pri yaboot promptu.  Ovaj unos æe takoðe biti dodatno "
-"oznaèen sa '*', ukoliko\n"
-"pritisnete TAB da bi videli startnu selekciju."
-
-#: ../../help.pm_.c:765
-#, fuzzy
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot je starter NewWorld MacIntosh hardver. On mo¾e da pokrene\n"
-"GNU/Linux, MacOS, ili MacOSX, ukoliko su prisutni na va¹oj ma¹ini.\n"
-"Normalno, ovi drugi operativni sistemi se smatraju korektno detektovani i \n"
-"instalirani. Ukoliko to nije sluèaj, mo¾ete ruèno dodati unos na ovom\n"
-"ekranu. Budite pa¾ljivi pri izboru parametara.\n"
-"\n"
-"\n"
-"Osnovne opcije Yaboot-a su:\n"
-"\n"
-"\n"
-"  - Inicijalna poruka: Jednostavna tekstualna poruka koja se prikazuje pre "
-"statrtnog\n"
-"prompta.\n"
-"\n"
-"\n"
-"  - Boot ureðaj: Ukazuje gde ¾elite da smestite informaciju potrebnu za \n"
-"startanje GNU/Linux-a. Generalno gledano, moraæete da podesite bootstrap "
-"particiju pre \n"
-"nego podesite ovu informaciju.\n"
-"\n"
-"\n"
-"  - Omoguæa Firmware pauzu: Za razliku od LILO-a, postoje dve vrste pauze \n"
-"yaboot-a.  Prva pauza se meri u sekundama i u tom vremenu mo¾ete \n"
-"birati izmeðu CD-a, OF starta, MacOS, ili Linux-a.\n"
-"\n"
-"\n"
-"  - Pauza pri startanju kernela: Ova pauza je slièna pauzi kod LILO "
-"startera.  Nakon \n"
-"izbora Linux-a, imaæete pauzu od 0.1 sekunde pre nego ¹to se selektuje\n"
-"default opis kernela.\n"
-"\n"
-"\n"
-"  - Omoguæi startanje CD-a ?: Ukoliko oznaèite ovu opciju moæi æete da "
-"izaberete 'C' za CD pri\n"
-"prvom startnom promptu.\n"
-"\n"
-"\n"
-"  - Omoguæi OF startanje?: Ukoliko oznaèite ovu opciju moæi æete da "
-"izaberete 'N' za Open\n"
-"Firmware pri prvom startnom promptu.\n"
-"\n"
-"\n"
-"  - Default OS: Mo¾ete da izaberete koji operativni sistem æe biti pokretan "
-"kao default kada Open Firmware \n"
-"pauza zavr¹i."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Izaberite hard disk koji ¾elite da izbri¹ete da bi instalirali \n"
-"novu Mandrake Linux particiju. Budite pa¾ljivi, svi podaci na njemu æe biti "
-"izgubljeni\n"
-"i neæe se moæi povratiti."
-
-#: ../../help.pm_.c:832
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Kliknite na \"U redu\" ukoliko ¾elite da izbri¹ete sve podatke i \n"
-"particije na ovom hard disku.Budite pa¾ljivi, psle klika na \"U redu\", vi\n"
-"neæete moæi da povratite bilo kojipodata ili particiju na hard disku,\n"
-"pa i bilo koje Windows podatke.\n"
-"\n"
-"\n"
-"Kliknite na \"Poni¹ti\" da bi poni¹ti ovu operaciju bez gubljenja podataka "
-"i\n"
-"particija koje su prisutne na ovom hard disku."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Vi ste izabrali sledegje servere: %s\n"
-"\n"
-"\n"
-"Ovi serveri se aktiviraju po osnovnoj postavci. Oni nemaju poznatih "
-"sigurnosnih\n"
-"nedostataka, ali se ipak mogu pojaviti neki novi. Ukoliko se to desi, morate "
-"ih a¾urirati\n"
-"¹to je pre mogugje.\n"
-"\n"
-"\n"
-"Da li zaista ¾elite da instalirate ove servise?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Nije moguæ prenos bez NIS domena"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ubacite FAT formatiranu praznu disketu u ureðaj %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Ova disketa nije formatirana sa FAT sistemom"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Da bi koristili ovaj izbor za èuvanje selekcije paketa, izaberite "
-"instalaciju sa ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Gre¹ka kod otvaranja datoteka %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "U redu"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Neke hardverske komponente u va¹em raèunaru zahtevaju odgovarajuæe drajvere "
-"da bi normalno funkcionisale.\n"
-"Informacije o njima mo¾ete pronaæi na: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Morate imati  root particiju.\n"
-"Za ovo, kreirajte particiju (ili kliknite na postojeæu).\n"
-"Zatim izaberite \"Taèka montiranja\" i podesite na `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Morate imati swap particiju"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Hm, nema swap particije\n"
-"\n"
-"Svejedno nastaviti dalje ?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Morate imati FAT particiju montiranu u /boot/efi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Koristi slobodan prostor"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nema dovoljno slobodnog prostora za alociranje novih particija"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Koristi postojeæu particiju"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Nema ni jedne pariticije za rad"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Koristi Windows particiju za loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Koju particiju ¾elite da korisite za Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Izaberite velièinu"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Velièina Root particije u MB:"
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Velièina Swap particije u MB:"
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Korisiti slobodan prostor na Windows particiji"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Kojoj particiji  ¾elite da promenite velièinu?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Proraèunavam granice Windows fajl-sistema"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Program za promenu velièine FAT paritcija ne mo¾e da upravlja va¹om "
-"particijom, \n"
-"zbog sledeæe gre¹ke: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Va¹a Windows particija je previ¹e fragmentirana, prvo pokrenite ``defrag''"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"PA®NJA !\n"
-"\n"
-"DrakX treba da izmeni velièinu Windows particije. Budite pa¾ljivi: ova\n"
-"operacija je opasna. Ukoliko to do sada niste radili, prvo treba da izaðete "
-"iz instalacije,pokrenete pod Windows-om\n"
-"scandisk (eventualno i defrag), a onda ponovo pokrenite instalaciju.\n"
-"Ako ste sigurni, pritisnite Ok (U redu)."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Koju velièinu ¾elite da zadr¾ite za prozore"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "particija %s "
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT izmena velièine neuspela: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ne postoje FAT particije kojima se mo¾e promeniti velièina ili koje se mogu "
-"korisititi za loopback (ili nema dovoljno slobodnog prostora)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Izbri¹i celi disk"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Ukloni Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Imate vi¹e od jednog hard diska, na koji od njih ¾elite da instalirate "
-"Linux ?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "SVE postojeæe particije i podaci na disku %s æe biti izgubljeni"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Custom disk particioniranje"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Koristi fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Sada mo¾ete particionirati va¹ %s hard disk ureðaj\n"
-"Kada zavr¹ite,ne zaboravite da potvrdite koristeæi `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nemate dovoljno slobodnog prostora na Windows particiji"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Ne mogu da pronaðem slobodan prostor za instaliranje"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX èarobnjak za particioniranje je prona¹ao sledeæa re¹enja:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Particioniranje nije uspelo : %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Pristupam  mre¾u"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Odstupam od mre¾e"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Gre¹ka, ali neznam kako da je razre¹im.\n"
-"Nastavite na va¹ rizik!"
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplirana taèka montiranja %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Neki va¾ni paketi nisu dobro instalirani.\n"
-"Va¹ cdrom ureðaj ili cd su neispravni.\n"
-"Proverite cdrom na instaliranom kompjuteru koristeæe \"rpm -qpl Mandrake/"
-"RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Dobro¹li u  %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Nepristupaèan disketni ureðaj"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Pokreæem korak `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Izaberite velièinu komponenti za instalaciju"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Ukupna velièina: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Verzija: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Velièina: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Izaberi pakete za instalaciju"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Info"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Instaliraj"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Instaliram"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Molim saèekajte"
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Preostalo vreme"
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Ukupno vreme"
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Pripremam instalaciju"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaliram paket %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Svejedno nastaviti dalje ?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Gre¹ka u listi paketa:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Da li da koristim postojeæu konfiguraciju za X11 ?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Va¹ sistem ima manjak snage. Usled toga mo¾ete imati problema pri "
-"instalaciji\n"
-"Mandrake Linux. Ukoliko se oni pojave, mo¾ete probati tekstualnu "
-"instalaciju. Da bi to postigli,\n"
-"pritisnite `F1' pri startanju sa CDROM-a, a onda ukucajte  `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Instalacione klase"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Molim vas da izabeterte jednu od sledeæih instalacionih klasa:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ukupna velièina grupa koje ste izabrali iznosi  %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ukoliko ¾elite da instalirate manje,\n"
-"izaberite procentualno broj paketa koje ¾elite da instalirate.\n"
-"\n"
-"Pri malom procentu æe se instalirati samo va¾ni paketi;\n"
-"dok æe pri procentu od 100%% biti instalirani svi paketi."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Na va¹em disku ima mesta samo za %d%% ovih paketa.\n"
-"\n"
-"Ukoliko ¾elite da instalirate manje od ovoga,\n"
-"izaberite procentualno broj paketa koje ¾elite da instalirate.\n"
-"Pri malom procentu æe se instalirati samo va¾ni paketi;\n"
-"dok æe pri procentu od  %d%% biti instalirano maksimalno moguæ broj paketa"
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Moæi æete da ih preciznije birate u sledeæem koraku."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procenat paketa za instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Odabir grupa paketa"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Pojedinaèno biranje paketa"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ukupna velièina: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Lo¹ paket"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ime: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Va¾no: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Ne mo¾ete selektovati ovaj paket jer nema vi¹e slobodnog prostora"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Sledeæi paketi treba da budu instalirani"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Sledeæi paketi æe biti izbrisani"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Ne mo¾ete selektovati/deselektovati ovaj paket"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ovo je obavezni paket,i ne mo¾e biti deselektovan"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Mo¾ete deselektovati ovaj paket jer je veæ instaliran"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ovaj paket mora biti a¾uriran\n"
-"Da li sigurno ¾elite da ga deselektujete ?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ne mo¾ete deselektovati ovaj paket.On mora biti a¾uriran"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Automatski prika¾i izabrane pakete"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Uèitaj/Snimi na disketu"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "A¾uriranje selekcije paketa"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "Minimalno instaliraj"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Procenjujem"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Samo momenat, pripremam instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d paketa"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Upozorenje !\n"
-"\n"
-"Pa¾ljivo proèitajte dole navedene uslove. Ukoliko se ne sla¾ete sa bilo "
-"kojim \n"
-"delom, onda nemate odobrenje za instaliranje sledeæeg CD-a. Pritisnite "
-"'Odbijam' \n"
-"da bi nastavili instalaciju bez upotrebe tih CD medija.\n"
-"\n"
-"\n"
-"Neke komponente sadr¾ane u sledeæim CD medijama nisu pod\n"
-"GPL Licencom ili sliènim ugovorima. Svaka takva komponenta je onda "
-"uslovljena\n"
-"uslovima i ugovorima sopstevene lincence. \n"
-"Pa¾ljivo proèitajte i upoznajte se sa takvim specifiènim licencama pre \n"
-"nego uotrebite ili redistribuirate pomenute komponente. \n"
-"Takve licence æe u glavnom zabranjivati transfer, kopiranje \n"
-"(osim za svrhu backup-a podataka), redisribuciju, nahnadnu promenu, \n"
-"rastavljanje, de-kompajliranje ili menjanje komponenti. \n"
-"Bilo koji deo ugovora koji nije ispo¹tovan istovremeno uklanja i ostala va¹a "
-"prava\n"
-"u datoj licenci. Ukoliko vam odreðena licenca ne garantuje takva\n"
-"prava, obièno ne mo¾ete instalirati programe na vi¹e od jedanog\n"
-"aiatema, ili ih prilagoditi da se mogu koristiti na mre¾i. Ukoliko ste u "
-"dilemi, molimo vas da direktno \n"
-"kontaktirate distributera ili editora komponente. \n"
-"Prenos na treæe programe ili kopiranje takvih komponenti ukljuèujuæi i\n"
-"dokumentaciju je obièno zabranjen.\n"
-"\n"
-"\n"
-"Sva prava na komponente na sledeæim CD medijama pripadaju njihovim \n"
-"respektativnim autorima i za¹tiæene su zakonima o intelektuanoj svojini i \n"
-"pravima koji se primenjuju na softverske programe.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Prihvati"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Odbaci"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Promenite va¹ Cd-Rom!\n"
-"\n"
-"Ubacite va¹ CD oznaèen sa \"%s\" u pogon i pritisnite \"U redu\" kada ste "
-"spremni.\n"
-"Ukoliko ga nemate pritisnite  Poni¹ti."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Gre¹ka pri instalaciji paketa:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Xm,pojavila se  gre¹ka"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "LIcencirani ugovor"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Upoznavanje\n"
-"\n"
-"Operativni sistem i druge komponente dostupne u Mandrake Linux "
-"distribuciji \n"
-"na dalje æe biti zvane \"Softverski Proizvodi\" . Softverski proizvodi "
-"ukljuèuju, ali nisu i \n"
-"ogranièeni na, skup programa, metoda, pravila i dokumentaciju koja je "
-"vezanaza operativni \n"
-"sistem i druge komponente Mandrake Linux distribucije.\n"
-"\n"
-"\n"
-"1. Licencni ugovor\n"
-"\n"
-"Pa¾ljivo proèitajte ovaj dokument. Ovaj dokument je licencni ugovor "
-"izmeðuizmeðu vas i   \n"
-"MandrakeSoft S.A. koji pola¾e pravo na Softverske Proizvode.\n"
-"Instaliranjem, kopiranjem ili upotrebom Softverskih Proizvoda u bilo kom "
-"vidu, vi eksplicitno \n"
-"prihvatate i potpuno se sla¾ete sa prihvatanjem postavki i uslova i stanja u "
-"ovoj Licenci. \n"
-"Ukoliko se ne sla¾ete sa bilo kojim delom Licence, nemate pravo da "
-"instalirate, kopirate ili koristite \n"
-"Softverske proizvode. \n"
-"Bilo koji poku¹aj instalacije, dupliciranja ili upotrebe Softverskih "
-"Proizvoda na naèin koji se ne sla¾e sa \n"
-"postavkama i uslovima ove Licence æe voditi gubitku va¹ih prava pod ovom \n"
-"Licencom. Na osnovu gubitka Licence, morate odmah uni¹titisve kopije \n"
-"Softverskih Proizvoda.\n"
-"\n"
-"\n"
-"2. Ogranièena Garancija\n"
-"\n"
-"Softverski Proizvodi i prateæa dokumentracija su omoguæene \"kao takve\", i "
-"bez garancije, do granica \n"
-"koje su dozvoljene zakonom.\n"
-"MandrakeSoft S.A. neæe, u svim uslovima i u granicama zakona, biti ogovoran "
-"za bilo koje specijalne,\n"
-"sluèajne, direktne ili indirektne ¹tete (ukljuèujuæi neogranièene¹tete ili "
-"gubitke \n"
-"u poslovanju, prekidu poslovanja, finansijskim gubicima, zakonske tra¾nje i "
-"kazne koje su rezultat sudske \n"
-"odluke, ili za bilo koji drugi gubitak) koje proizilaze iz upotrebe ili "
-"nemoguænosti kori¹æenja Softverskih \n"
-"Proizvoda, èak iako je MandrakeSoft S.A. savetovao i ukazivao na moguænost "
-"pojave takve \n"
-"¹tete.\n"
-"\n"
-"Ogranièena odgovornosti vezane za posedovanje ili upotrebu zabranjenog "
-"softvera u nekim zemljama\n"
-"\n"
-"Do granica koje su uslovljene zakonom, MandrakeSoft S.A. ili njegovi "
-"distributeri neæe, ni pod kojim uslovima, biti \n"
-"odgovorni za specijalne, namerne direktne ili indirektne ¹tete(ukljuèujuæi "
-"neogranièene \n"
-"¹tete ili gubitke u poslovanju, prekidu poslovanja, finansijskim gubicima, "
-"zakonske tra¾nje \n"
-"i kazne koje su rezultat sudske odluke, ili za bilo koji drugi gubitak) koje "
-"proizilaze \n"
-"iz upotrebe ili nemoguænosti kori¹æenja Softverskih Komponenti ili koje "
-"proizilaze download-ovanih softverskih komponenti \n"
-"bilo kog Mandrake Linux sajta koji su zabranjeni ili ogranièeni u nekim "
-"zemljama po lokalnim zakonima.\n"
-"Ova ogranièena prava se primenjuju, ali nisu i ogranièena na,kriptografske "
-"komponente \n"
-"koje se nalaze u Softverskim Proizvodima.\n"
-"\n"
-"\n"
-"3. GPL i za nju vezane Licence\n"
-"\n"
-"Softverski proizvodi se sastoje od komponenti kreiranih od strane razliètih "
-"lica ili entiteta. Veæina  \n"
-"od ovih komponenti se nalaze pod postavkama i uslovima GNU Op¹te Javne \n"
-"Licence, koja se od sada zove  \"GPL\", ili sliène licence. Veæina ovih "
-"licenci dozvoljava upotrebu, \n"
-"dupliciranje, adaptaciju ili redistribuciju komponenti koje one obuhvataju. "
-"Molimo Vas da pa¾ljivo proèitte postavke \n"
-"i uslove licencnog ugovora za svaku komponentu pre upotrebe bilo koje "
-"komponenete. Bilo koje pitanje \n"
-"vezano za licencu komponenti treba da bude adresirano na autora komponente a "
-"nena MandrakeSoft.\n"
-"Programi koje je razvio MandrakeSoft S.A. podle¾u pod GPL Licencu. "
-"Dokumentacija pisana od \n"
-"strane MandrakeSoft S.A. podle¾e pod posebnu licencu. Molim da pogledate "
-"dokumentaciju  \n"
-"za detalje.\n"
-"\n"
-"\n"
-"4. Prava na Intelektualnu svojinu\n"
-"\n"
-"Sva prava na komponente Softverskih proizvoda pripadaju njihovim autorima i "
-"ona \n"
-"su za¹tiæena zakonima o intelektualnoj svojini i pravima koji se primenjuju "
-"na softverske programe.\n"
-"MandrakeSoft S.A. je rezervisao svoja prava na modifikovanje ili adaptaciju "
-"SoftverskihProizvoda, kako za celinu tako i za \n"
-"delove, za sve sve svrhe i sve upotrebe.\n"
-"\"Mandrake\", \"Mandrake Linux\" i pridru¾eni logotipi i oznake MandrakeSoft "
-"S.A.  \n"
-"\n"
-"\n"
-"5. Zakonska prava \n"
-"\n"
-"Ukoliko se bilo koji deo ovog ugovora izbegava, nelegalno i van  sudske "
-"odluke, ovaj \n"
-"deo se iskljuèuje iz ovog ugvora. Obavezni ste da primenjujeteostale delove "
-"ovog\n"
-"ugovora.\n"
-"Postavke i uslovi ove Licence su odreðeni Zakonima Francuske.\n"
-"Svi nesporazumi bi trebali biti re¹eni van suda. Kao poslednje \n"
-"sredstvo, nesporazumi æe biti upuæeni na odgovarajuæe Sudske ustanove u "
-"Parizu - Francuska.\n"
-"Za bilo koje pitanje koje je vezano za ovaj dokument, kontaktirajte  "
-"MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatura"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Koji  raspored tastature ¾elite ?"
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Ovde je predstavljena cela lista dostupnih tastatura"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Koju  instalacionu klasu birate ?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Instalacija/A¾uriranje"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Da li je ovo instalacija ili a¾uriranje ?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Preporuèeno"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "A¾uriranje"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Izaberite tip mi¹a"
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Port za mi¹a"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Izaberite na koji serijski port je va¹ mi¹ prikljuèen."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Emulacija tastera"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Emulacija 2 tastera"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "EmulaciÙa 3 tastera"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfiguri¹em PCMCIA kartice..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Konfiguracija  IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "nema dostupnih particija"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Skeniranje particija za pronala¾enje taèke montiranja"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Izaberite taèke montiranja"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ne mogu proèitati tabelu particija, mnogo je iskvarena za mene :(\n"
-"Poku¹aæu dalje zaobilazeæi lo¹e particijeMogu poku¹ati da formatiram lo¹e "
-"particije (SVI PODACI æe biti izgubljeni !).\n"
-"Drugo re¹enje je da se DrakX onemoguæi da modufikuje tabelu particija.\n"
-"(gre¹ka je %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ne mo¾e da ispravno proèita tabelu particija.\n"
-"Dalji nastavak ide na va¹ rizik !"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nema slobodnog prostora za 1MB bootstrap! Instalacija gje se nastaviti, ali "
-"da bi podigli va¹sistem, moragjete da kreirate bootstrap particiju u "
-"DiskDrake-u"
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "Nije root particije potrebne za a¾uriranje"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Root particija"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Na kojoj particiji je root particija (/) va¹eg sistema?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Treba da resetujete ma¹inu za primenu izmena u tabeli particija"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Izaberi particije za formatiranje"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Proveri lo¹e blokove ?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Formatiranje particiju"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Kreiranje i formatiranje datoteke %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nema dovoljno swap-a da zavr¹i instalaciju, dodajte jo¹ swap-a"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Tra¾im pakete"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Tra¾im pakete za a¾uriranje..."
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "Va¹ sistem nema dovoljno mesta za instalaciju ili a¾uriranje (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Kompletna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimalna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Preporuèena (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Izbor po ¾elji"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Molim Vas da izaberete uèitavanje ili snimanje selekcije paketa na disketu.\n"
-"Format koji se koristi je isti kao i kod  auto_install generisanih disketa."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Uèitaj sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Uèitavam sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Odabir paketa"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "Ubacite disketu koja sadr¾i selekciju paketa"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Snimi na disketu"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Selektovana velièina je vegja od slobodnog prostora"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ukoliko imate gore navedene CD-ove, kliknite na  Ok.\n"
-"Ukoliko nemate nijedan CD, kliknite na  Cancel.\n"
-"Ako vam nedostaju  samo neki CD-ovi , deselektujte ix, a onda kliknite na Ok."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom oznaèen kao \"%s"
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instaliram pakete %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Postinstalaciona konfiguracija"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Ubacite Boot disketu u ureðaj %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Ubacite Update Modules disketu u ureðaj %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Zbog razlièitih op¹tix zahteva koji se odnose na ovaj  softver  kao i "
-"izlo¾enost\n"
-"mnogim zakonodavstvima,kupac i/ili korisnik softvera treba\n"
-"da proveri da li zakon omoguæava  download i upotrebu softvera.\n"
-"\n"
-"Kupci  i korisnici treba da znaju da ne trebada izvrdavaju\n"
-"zakon.Ukoliko se to  ipak desi, oni  æe snositi sankcije\n"
-"\n"
-"MandrakeSoft nije odgovoran za bilo kakve gubitke ili ¹tetekoje mogu nastati,"
-"niti za sudske kazne koje se mogu javiti.\n"
-"\n"
-"\n"
-"Za bilo kakva pitanja vezana za ovu temu kontaktirajte \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Izaberite mirror sa kog æete skinuti pakete"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Kantaktirajte mirror za listu moguæih paketa"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Izaberite pakete za instalaciju"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Koja je va¹a vremenska zona ?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "Va¹ sistemski (BIOS) èasovnik je pode¹en na GMT"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatska sinhronizacija vremena (preko NTP-a)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "NTP Server"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Udaljeni CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Bez ¹tampaèa"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Sa¾etak"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Mi¹"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Vremenska zona"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "©tampaè"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDN kartica"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Zvuèna kartica"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV katica"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Lokalne datoteke"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Unesi root lozinku"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Bez lozinke"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Ova lozinka je suvi¹e jednostavna (treba da ima bar %d znakova)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Autentifikacija"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "LDAP Autentifikacija"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "LDAP Server"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "NIS Autentifikacija"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS Domen"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS Server"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Startni disk obezbeðuje naèin podizanja va¹eg Linux sistema bez zavisnosti\n"
-"od normalnog startera. Ovo je korisno ako ne ¾elite da instalirate\n"
-"SILO(ili grub) na va¹ sistem, ako drugi operativni sistem ukloni SILO, ili "
-"SILO ne\n"
-"radi sa va¹im hardverom. Startni disk mo¾ete koristiti sa Mandrake Linux\n"
-"'diskom za spasavanje', ¹to olak¹ava oporavak u sluèaju te¾e havarije.\n"
-"Ukoliko ¾elite da kreirate startnu disketu za va¹ sistemubacite disketu u "
-"pogon i pritisnite \"Da\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Prvi flopi/disketni ureðaj "
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Drugi flopi/disketni ureðaj"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Preskoèi"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Startni disk obezbeðuje naèin podizanja va¹eg Linux sistema bez zavisnosti\n"
-"od normalnog startera. Ovo je korisno ako ne ¾elite da instalirate\n"
-"LILO(ili grub) na va¹ sistem, ako drugi operativni sistem ukloni LILO, ili "
-"LILO ne\n"
-"radi sa va¹im hardverom. Startni disk mo¾ete koristiti sa Mandrake Linux\n"
-"'diskom za spasavanje', ¹to olak¹ava oporavak u sluèaju te¾e havarije.\n"
-"Da li biste da kreirate startnu disketu za va¹ sistem?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Ti malera, nema diskete"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Izabrerite disketni ureðaj koji æete koristiti  za kreiranje starne diskete"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Ubacite praznu disketu u ureðaj %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Kreiram startni disk..."
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Pripremam starter..."
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Po¹to izgleda da imate staromodnu ili nepoznatu \n"
-" ma¹inu, yaboot starter negje raditi kod vas.\n"
-"Instalacija gje biti nastavljena, ali gjete morati da\n"
-" BootX da bi podigli sistem"
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Da li ¾elite da koristite aboot ?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Gre¹ka pri instalaciji aboot-a, \n"
-"Da li da probam da instaliram èak ako to vodi uni¹tenju prve particije?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Instaliraj starter"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalacija startera neuspela. Gre¹ka je:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Moraæete da promenite Open Firmware boot-ureðaj da \n"
-" bi mogli da koristite starter.  Dr¾ite Command-Option-O-F\n"
-" pri startanju i unesite:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Onda ukucajte: shut-down\n"
-"Kada sledeæi put startujete ma¹inu trebali bi da vidite staterov prompt."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Mala"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Srednja"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Velika"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Izaberite sigurnosni nivo"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ubacite praznu disketu u ureðaj %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Kreiram auto instalacioni flopi"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Neki koraci nisu kompletirani.\n"
-"\n"
-"Da li stvarno ¾elite da zavr¹ite ?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Èestitamo, instalacija je zavr¹ena.\n"
-"Izvadite disketu iz drajva i pritisnite <Enter> da se raèunar resetuje.\n"
-"\n"
-"Za informacije o popravkama koje su na raspolaganju za ovo izdanje\n"
-"Mandrake Linux Linux-a, proèitajte deo 'Errata' koji mo¾ete naæi na\n"
-"http://www.mandrakelinux.com/.\n"
-"\n"
-"Informacije o konfigurisanju va¹eg sistema mo¾ete naæi u post-instalacionom\n"
-"poglavlju zvaniènog Mandrake Linux 'Vodièa za korisnike'."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Kreiraj auto instalacionu disketu"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Auto instalacija mo¾e biti potpuno automatizovana ukoliko ¾elite,\n"
-"u tom sluèaju preuzeæe kontrolu nad hard-diskom!!\n"
-"(ovo se odnosi na instalaciju na drugoj ma¹ini).\n"
-"\n"
-"Mo¾da volite da ponovite instalaciju.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automatski"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Ponavljanje"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Saèuvaj selekciju paketa"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Instalacija %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"<Tab>/<Alt-Tab> kret. izmeðu elemenata | <Space> izbor | <F12> sledeæi ekran"
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "nedostaje kdesu"
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "Izaberite akciju"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Napredno"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Samo momenat..."
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Pro¹iri stablo"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Skupi stablo"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Birajte: ravno ili grupno sortirano"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Dvosmisleno (%s), budite precizniji\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Lo¹ izbor, probajte ponovo\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (po default-u %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Va¹ izbor ? (po default-u %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Va¹ izbor ? (po default-u %s unesi `none' za nijedan) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Èe¹ki (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Nemaèki"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "©panski"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Finski"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Francuski"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norve¹ki"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Poljski"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Ruski"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "©vedski"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "UK tastatura"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "US tastatura"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Albanski"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Jermenski (stari)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Jermenski (typewriter)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Jermenski (fonetski)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbejdzan  (latinica)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belgijski"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bugarski"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilski (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Beloruski"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "©vajcarski (Nemaèki raspored)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "©vajcarski (Francuski  raspored)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Èe¹ki (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Nemaèki (bez mrtvih tastera)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Danski"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norve¹ki)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estonski"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzijski (\"Ruski\" raspored)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzijski (\"Latinièni\" rapored)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Grèki"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Maðarski"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Hrvatski"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Jevrejski"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Jevrejski (Fonetski)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iranski"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Islandski"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Italijanski"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japanski 106 tastera"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Korejanska tastatura"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latino-Amerièki"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litvanski AZERTY(stari)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litvanski AZERTY(novi)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litvanski \"number row\"QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanski \"fonetski\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "Lokacija"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Makedonski"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Danski"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Poljski (qwerty raspored)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Poljski (qwertz raspored)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugalski"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Kanadski (Kvebek)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Rumunski (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Rumunski (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Ruski (Javerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Slovenaèki"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaèki (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaèki (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbejdzanski (æirilica)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr " Thai tastatura"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr " Thai tastatura"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turski (tradicionalni \"F\" model)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turski (moderni \"Q\" model)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukrajinski"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "US tastatura (internacionalna)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vijetnamski  \"number row\"QWERTY"
-
-#: ../../keyboard.pm_.c:240
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Srpski (latinièni/æirilièni raspored)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Kru¾no montiranje  %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Ukloni prvo logièke volumene\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun Mi¹"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standardni"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generièki PS2 mi¹ sa toèkiæem"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 taster"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Generic"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Toèkiæ"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "serijski"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Generièki 2 tastera mi¹"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Generièki 3 tastera mi¹"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC serija (serijski)"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM serija"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mouse (serijski, stari C7 tip)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "bus mi¹"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 tastera"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 tastera"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "nijedan"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Nema mi¹a"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Molim Vas da testirate mi¹a"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Da bi mogli da aktivirate mi¹a"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "pomerite toèkiæ !"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Kraj"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Sledeæi  ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Prethodni"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Da li je ovo ispravno ?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Konektuj na internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Najèe¹æi naèin za konekciju sa adsl je pppoe.\n"
-"Meðutim, postoje konekcije koje koriste pptp i neke koje koriste dhcp.\n"
-"Ukoliko ne znate koja je, izaberite 'koristi pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "koristi dhcpd"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "koristi pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "koristi pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "Kog dhcp klijenta ¾elite da koristite ?Postavljeni je dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nije detektovana nijedna mre¾na kartica.\n"
-"Ne mogu da podesim ovaj tip konekcije."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Izaberite mre¾ni interfejs"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Izaberite mre¾ni adapter koji ¾elite da koristite za konekciju na internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "Nije pronaðena mre¾na kartica"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Pode¹avanje mre¾e"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Molim unesite  ime hosta ukoiko ga znate\n"
-"'Neki DHCP serveri zahtevaju ime hosta da bi radili.\n"
-"Va¹e ime hosta treba da bude puno ime kao npr.\n"
-"``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Ime hosta:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "èarobnjak za pode¹avanje mre¾e"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Eksterni ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interna  ISDN kartica"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Kakva je vrsta va¹e ISDN kenekcije ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Koju ISDN konfiguraciju vi¹e preferirate?\n"
-"\n"
-"* Stara kofiguracja koristi isdn4net. Ona sadr¾i mogjne alatke, ali je\n"
-"  problematièna za pode¹avanje pogotovo za poèetnike, i nije uobièajena.\n"
-"\n"
-"* Nova konfiguracija je jednostavnija za razumeti, standardnija,\n"
-"  ali sa manje opcija i alata.\n"
-"\n"
-"Mi preporuèujemo lak¹u (jednostavniju) konfiguraciju.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nova konfiguracija (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Stara konfiguracija (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN Konfiguracija"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Izaberite svog provajdera.\n"
-" Ukoliko nije na listi, izaberite Unlisted"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Startni(Boot) protokol"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Evropa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Ostatak sveta"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Ostatak sveta \n"
-" bez D-kanala (zakupljene linije)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Koji protokol ¾elite da koristite ?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Kakvu vrstu kartice imate?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Ne znam"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Ukoliko imate ISA karticu, vrednosti na sledeæem ekranu bi trebale biti "
-"ispravne.\n"
-"\n"
-"Ukoliko imate PCMCIA karticu, morate znati  irq i  io za va¹u karticu.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Prekini"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Nastavi"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Koja je va¹a ISDN kartica ?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Detektovana je ISDN PCI kartica, nepoznatog tipa. Izaberite jednu PCI "
-"karticu na sledeæem ekranu."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Nije pronaðena ISDN PCI kartica.Izaberite jednu na sledeæem ekranu."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Izaberite serijski port  na koji je modem povezan."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Dialup opcije"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Ime konekcije"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Broj telefona"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "ID za logovanje"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Bazirano na skripti"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Bazirano na terminalu"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Ime domena"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Prvi DNS Server (opcija)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Drugi DNS Server (opcija)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Mo¾ete se diskonektovati ili rekonfigurisati konekciju."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Podesi internet konfiguraciju"
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Trenutno ste konektovani na Internet"
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Sada se mo¾ete konektovati na Internet ili rekonfigurisati konekciju"
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Trenutno niste konektovani na Internet"
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Konektuj na Internet"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Diskonektuj sa Interneta"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Podesi mre¾nu konfiguraciju(LAN ili Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Internet konekcija i  konfiguracija"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Sada treba da podesimo %s konekciju."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Sada treba da podesimo %s konekciju.\n"
-"\n"
-"\n"
-"Pritisnite \"U redu\" za nastavak."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Pode¹avanje mre¾e"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Zbog toga ¹to radite mre¾nu instalaciju, va¹a mre¾a je veæ pode¹ena "
-"pode¹ena.\n"
-"Kliknite na  OK  zadrd¾ali konfiguraciju Network/Internet konekcije, ili "
-"cancel da bi ponovo uradili kofiguraciju.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Dobrodo¹li u program za Pode¹avanje Mre¾ne konekcije\n"
-"\n"
-"Sada treba da konfiguri¹emo va¹u internet/mre¾nu konekciju.\n"
-"Ukoliko ne ¾elite auto detekciju, deselektujte opciju.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Izaberite profil za konfigurisanje"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Koristi auto detekciju"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Detektujem  ureðaje..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Normalna modemska konekcija"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "Detektovano na portu %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN konekcija"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "detektovano %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ADSL konekcija"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "Detektovano na interfejsu %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Kablovska konekcija"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "Detektovana je kablovska konekcija "
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "LAN konekcija"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "detektovana mre¾na kartica(e)"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Izaberite tip konekcije koji ¾elite da koristite"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Vi ste podesili vi¹e naèina za konektovanje na Internet.\n"
-"Izaberite jedan od njih koji ¾elite da koristite.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Internet konekcija"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Da li ¾elite da startujete konektovanje pri startanju sistema ?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Pode¹avanje mre¾e"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Pojavio se problem tokom restartovanja mre¾e?\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"èestitamo, mre¾na i internet konfiguracija je zavr¹ena.\n"
-"\n"
-"Konfiguracija se sada mo¾e primeniti na sistem.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Kada se to uradi, trebali bi da restartujete X\n"
-"okru¾enje da bi izbegli probleme sa promenom hostname-a."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"Upozorenje: Ovaj ureðaj je veæ prethodno konfigurisan za konektovanje na "
-"Internet.\n"
-"Samo prihvaitite da bi postavku ostavili istom.\n"
-"Izmena polja koje vidite æe poni¹titi postojeæu konfiguraciju."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Molim unesite IP konfiguraciju za ovu ma¹inu.\n"
-"Svaka stavka treba de bude tavka treba da bude uneta kao\n"
-"IP adresa (na primer, 123.45.67.89)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Pode¹avanje mre¾nog ureðaja %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr "(drajver %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP adresa"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Mre¾na maska"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Automatski IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa treba da bude u formatu 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Molim unesite ime va¹eg domena, ime hosta, kao IP adrese dodatnih\n"
-"'nameserver'-a. Ime va¹eg hosta treba da bude puno kvalifikovano ime hosta,\n"
-"kao na pr.  ``mybox.mylab.myco.com''.\n"
-"Ako nemate dodatnih 'nameserver'-a, ostavite ta polja prazna."
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS server"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Gateway ureðaj"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Pode¹avanje proksija"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Proxy treba da bude http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Proxy treba da bude ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Konfiguracija interneta"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Da li hoæete da se konektujete na internet sada?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Testiranje konekcije..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Sistem je trenutno konektovan na Internet"
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Iz sigurnosnih razloga, on æe sada biti diskonektovan."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Izgleda da sistem nije konektovan na Internet.\n"
-"Probajte da promenite konfiguraciju."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Konfiguracija Internet konekcije"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Molim VAS da popunite ili oznaèite polja ispod"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ kartice"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "(DMA) kartice"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr " IO kartice"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr " IO_0 kartice"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "IO_1 kartice"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Va¹ lièni broj telefona"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Ime provajdera (npr. provider.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Broj telefona provajdera"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "Provajderov dns 1 (opciono)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "Provajderov dns 2 (opciono)"
-
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "Izaberi tastaturu"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Mod za biranje"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Brzina konekcije "
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Vreme konekcije: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Logovanje za raèun (korisnièko ime)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Lozinka za raèun"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Extended particija nije podr¾ana na ovoj platformi"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Imate prazninu u va¹oj tabeli particija ali je ne mogu korisiti.\n"
-"Jedino re¹enje je da pomerite primarnu particiju tako da praznina bude\n"
-"do extended particija"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Otvaranje iz datoteke %s nije uspelo: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Lo¹e backup-ovana datoteka"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Gre¹ka kod unosa u datoteka %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Ne¹to lo¹e se de¹ava sa va¹im hard diskom. \n"
-"Test integriteta podataka nije pro¹ao. \n"
-"To znaèi da sve ¹to se nalazi na disku æe zavr¹iti kao ðubre"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "mora imati"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "va¾no"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "veoma lepo"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "lepo"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "mo¾da"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Op¹ti Unix-ov sistem za ¹tampanje"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Nove Generacije"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Demon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - ©tampaj, nemoj da pamti¹"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Lokalni  ¹tampaè"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Udaljeni ¹tampaè"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Udaljeni CUPS server"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Udaljeni lpd server"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Mre¾ni ¹tampaè (socket)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Server ¹tampaèa:"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Ureðaj za ¹tampaè URI"
-
-#: ../../printer.pm_.c:48
-#, fuzzy
-msgid "Pipe job into a command"
-msgstr "Ubaci u komandu"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modul %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Izbor povezanosti ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kako je ¹tampaè povezan?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"Sa udaljenim CUPS serverom, ne morate da kofiguri¹ete\n"
-"ovde ni jedan ¹tampaè; ¹tampaèi æe biti automatski detektovani.\n"
-"osim ako imate server na drugoj mre¾i; ako je to\n"
-"sluèaj, morate dati IP adresu  CUPS servera\n"
-"a opciono i broj porta."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Nijedan"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Izaberite default (osnovnog) korisnika:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Zatvori"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "Udaljeni ¹tampaè"
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresa treba da bude u formatu 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Broj porta bi trebao da bude numerièki broj"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "Lokalni  ¹tampaè"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "SMB server IP:"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Konfiguracija stila startanja"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Detektujem  ureðaje..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Testiranje portova"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "©tampaè, model \"%s\", je detektovan na "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Lokalni ureðaj za ¹tampaè"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Na koji ureðaj je va¹ ¹tampaè povezan \n"
-"(/dev/lp0 odgovara LPT1: u DOS-u)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Ureðaj za ¹tampaè:"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "Nedostaje UreKjaj/ime datoteke!"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Uèitavam CUPS bazu podataka o drajverima..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Opcije za udaljeni lpd"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Da biste mogli da koristite udaljeni red poslova\n"
-"za ¹tampu morate navesti ime hosta na kome je server za ¹tampaè\n"
-"i ime reda poslova za ¹tampu na tom serveru."
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "Ime udaljenog host-a:"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Udaljeni ¹tampaè"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "Nedostaje ime udaljenog host-a!"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nedostaje ime udaljenog host-a!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT)  opcije ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Da biste mogli da ¹tampate na mre¾ni ¹tampaè, treba da navedete\n"
-"ime hosta LAN menad¾era (koje nije uvek isto kao TCP/IP ime ma¹ine);\n"
-"IP adresu ¹tampaèevog servera; deljeno ime ¹tampaèa kome pristupate,\n"
-"kao i potrebna korisnièka imena i lozinke."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "SMB server  host:"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "SMB server IP:"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Deljeno (zajednièko)  ime :"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Radna grupa(Workgroup):"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Morate dati ili ime servera ili njegov IP!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "Nedostaje deljeno ime za Samba-u!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "NetWare opcije ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Da biste mogli da ¹tampate na NetWare ¹tampaè, treba da navedete\n"
-"ime  NetWare servera za ¹tampaè (koje nije uvek isto kao TCP/IPhostname! );\n"
-"te  ime 'reda' ¹tampaèa kome pristupate,\n"
-"kao i potrebna korisnièka imena i lozinke."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Server ¹tampaèa:"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Print Queue ime:"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "Nedostaje ime NCP servera!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "Nedostaje ime za NCP red!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Opcije prkljuènog  ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:528
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Da bi ¹tampali na prkljuènom ¹tampaèu, morate obezbediti\n"
-"ime hosta za ¹tampaè i eventualno broj porta."
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "Ime hosta za ¹tampaè"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "Nedostaje ime hosta!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Ureðaj za ¹tampaè URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Mo¾ete direktno odrediti URI za pristup ¹tampaèu. URI mora ispunjavati ili "
-"CUPS ili Foomatic specifikacije. Zapamtite da nisu svi URI tipovi podr¾ani."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "Morate uneti validan URI!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Svaki ¹tampaè mora da ima ime (na primer lp).\n"
-"Polja za Opis i Lokaciju ne moraju biti \n"
-"popunjena. To su samo korisne napomene za korisnike."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Ime ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Opis"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Lokacija"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Uèitavam CUPS bazu podataka o drajverima..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "Selekcija modela ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "Koju model ¹tampaèa imate?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Konfiguracija interneta"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Konfiguracija interneta"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, fuzzy, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Port mora biti brojna oznaka!"
-
-#: ../../printerdrake.pm_.c:1094
-#, fuzzy, c-format
-msgid "Option %s must be a number!"
-msgstr "Port mora biti brojna oznaka!"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Da li ¾elite da i¹tampate test stranicu?"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "Testiranje portova"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "©tampaè"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standardni"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "©tampam test stran(ice)u..."
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "©tampam test stran(ice)u..."
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "©tampam test stran(ice)u..."
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Test stran(ice)a je poslana ¹tampaè demonu.\n"
-"To mo¾e dovesti do malog odlaganja starta ¹tampaèa.\n"
-"Status ¹tampaèa:\n"
-"%s\n"
-"\n"
-"Da li radi OK ?"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Test stran(ice)a je poslana ¹tampaè demonu.\n"
-"To mo¾e dovesti do malog odlaganja starta ¹tampaèa.\n"
-"Da li radi OK ?"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Bez ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Odstupam od mre¾e"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "Opcije ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Konfiguracija interneta"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Ime ¹tampaèa treba da sadr¾i samo slova, brojeve i underscore"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "Bez ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Uèitavam CUPS bazu podataka o drajverima..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Pode¹avanje ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Startujem konekciju..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Podesi mre¾u"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor nije konfigurisan"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Pode¹avanje mre¾e"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Koji sistem za ¹tampanje ¾elite da koristite ?"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Velika"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoidna"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Koji sistem za ¹tampanje ¾elite da koristite ?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Izaberite Spooler za ¹tampaè"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Koji sistem za ¹tampanje (spooler) ¾elite da koristite ?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Podesi ¹tampaè"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Opcije ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "Da li biste da podesite ¹tampaè?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Normalni Mod"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Podrazumevano)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Udaljeni CUPS server"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "Udaljeni CUPS server"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Dodajte ¹tampaè"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Da li hoæete da testirate konfiguraciju?"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Konfiguracija interneta"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Internet konekcija"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Selekcija modela ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "©tampam test stran(ice)u..."
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "Udaljeni ¹tampaè"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Udaljeni ¹tampaè"
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Da li hoæete da restartujete mre¾e?"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Udaljeni ¹tampaè"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Pode¹avanje proksija"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Dobrodo¹li u alat za konfiguraciju proxy-ja.\n"
-"\n"
-"Ovde mo¾ete da podesite va¹e http i ftp proksije\n"
-"sa ili bez korisnièkog imena i lozinke\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Molim Vas da unesete http proxy informacije\n"
-"Ostavite polja praznima ukoliko ne ¾elite da koristetite proksi"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "Port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url treba da poèinje sa http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Broj porta bi trebao da bude numerièka oznaka (broj)"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Molim Vas da unesete informacije o ftp proxy-ju\n"
-"Polja ostavite praznima ukoliko ne ¾elite da koristite ftp proksi"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url treba da poèinje sa 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Unesite proxy korisnièko ime i lozinku, ukoliko postoje.\n"
-"Polja ostavite paznima ukoliko ne ¾elite da koristite korisnièko ime/lozinku"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "logovanje"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "lozinka"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "pomovo unesite lozinke"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Nepodudarnost lozinki. Probajte ponovo!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nije moguæe dodati particiju na _formatiran_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Nije moguæ unos u fajl %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid neuspelo"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid neuspelo (mo¾da nedostaje raidtools ?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nema dovoljno particija za RAID nivo %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Startam ALSA (Advanced Linux Sound Architecture) sistem za zvuk"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron -  podesite period.komande"
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd se koristi za praæenje statusa baterije i logovanje preko syslog.\n"
-"Koristi se i za ga¹enje ma¹ine (radi i na desktop ma¹inama) kada je baterija "
-"slaba"
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Pokreæe komande zakazane at komandom,kao i  batch  komande kao je "
-"optereæenost\n"
-"sistema mala."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je standardni UNIX program koji pokreæe korisnièke programe\n"
-"preriodièno u zakazano vreme. vixie cron  dodaje opcije prostom UNIX cron,"
-"ukljuèujuæi bolju  sigurnost i bolju podesivost."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM daje podr¹ku za mi¹a za teksulano-bazirane aplikacije kao ¹to je\n"
-"Midnight Commander.Isto tako daje podr¹ku za  pop-up menije na  konzoli."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake starta ispitivanje haredvera, i po potrebi gje podesiti \n"
-"novi/izmenjeni hardver."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache je  WWW server. On se koristi da opslu¾uje  HTML fajlove\n"
-"i CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Interent super server demon (znan kao netd) starta \n"
-"razne internet servise.On je odgovoran za pokretanje mnogix servisa kao npr. "
-"elnet, ftp, rsh, i  rlogin.Iskljuèujuæi njega, iskljuèujete i servise \n"
-"za koje je on odgovoran."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Pokrenite filtriranje paketa za Linux kernel serije 2.2, da bi podesili\n"
-"firewall radi za¹tite va¹e ma¹ine od mre¾nih napada."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ovaj paket aktivira odabranu mapu tastature kako je pode¹eno \n"
-"u  /etc/sysconfig/keyboard.Ovo se pode¹ava koristeæi kbdconfig alatku.\n"
-"Treba da bude ukljuèen na veæinu ma¹ina."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatska regeneracija kernelovog zaglavlja u /boot zar\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatska detekcija i konfiguracija hardvera pri startanju sistema."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf gje ponekad izvoditi razne zadatke tokom\n"
-"startanja sistema radi odr¾avanja i pode¹avanja sistema."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je print demon potreban  da bi  lpr radio dobro.To je \n"
-"u osnovi server koji arbitrira  print poslove ¹tampaèu(ima)."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux-ov Virtuelni Server, koristi se za izgradnju brzog i dostupnog\n"
-"servera."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"Nazvan  (BIND) je Domain Name Server (DNS) koji se koristi za daje  \n"
-"host ime  IP adresi."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Montiranje i demontiranje svih Mre¾nih fajl sistema(NFS), SMB (Lan\n"
-"Manager/Windows), i  NCP (NetWare) taèaka montiranja. "
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiviranje i deaktiviranje svih mre¾nih interfejsa konfigurisanih za "
-"start \n"
-"pri podizanju sistema."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je popularni protokol za razmenu  fajlova preko TCP/IP mre¾a.\n"
-"Ovaj servis omoguæava funkcionalnost NFS servera,koji se konfiguri¹e preko \n"
-"/etc/exports datoteke."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je popularni protokol za razmenu  fajlova preko TCP/IP mre¾a.\n"
-"Ovaj servis omoguæava funkcionalnost NFS  file locking funkcije"
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatski ukljuèuje numlock taster pod konzolom\n"
-"i u XFree pri startanju."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podr¹ka za OKI 4w i kompatibilne mu  win ¹tampaèe."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA podr¹ka  se obièno koristi za  eternet i modeme u laptopovima.\n"
-"Neæe se pokrenuti ukoliko nije konfigurisan tako daje bezbedno instaliran \n"
-"na sistemu kom nije potreban."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmaper uravlja  RPC konekcijama,koje koriste\n"
-"protokoli kao NFS i  NIS.Portmap server mora biti pokrenut na ma¹inama\n"
-"koje rade kao serveri za protokole koji koriste RPC mehanizam."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix je  Mail Transport Agent,koji u stvari \n"
-"preme¹ta po¹tu sa jedne ma¹ine na drugu."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"èuva i obnavlja sistemski  entropy pool za veæi kvalitet generisanje\n"
-"sluèajnih brojeva."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Dodeljuje raw ureKjaje za blok ureKjaje (kao ¹to su hard disk\n"
-"particije), ¹to mogje biti korisno za aplikacije kao ¹to je Oracle"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed demon dozvoljava automatsko IP ruter update-ovanje preko\n"
-"RIP protokola.Dok se RIP dosta korisiti na malim mre¾ama,kompleksniji \n"
-" routing protokoli su potrebni za kompleksne mre¾e."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokol dozvoljava korisnicima na mre¾i da omoguæe\n"
-"merenje performansi za bilo koju ma¹inu na toj  mre¾i."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokol omoguæava korisnicima na mre¾i da otkriju ko je\n"
-"ulogovan na drugim ma¹inama."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokol dozvoljava udaljenim korisnicima da dobiju listu svih\n"
-"korisnika ulogovanih na sistem sa pokrenutim rwho demonom (slièno finger-u)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Pokregje sistem za zvuk na va¹oj ma¹ini"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog je objekat pomoæu kog mnogi demoni koriste za logovanje poruka\n"
-"u raznim sistemskim log fajlovima.Dobra je ideja imati uvek pokrenut syslog."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Podi¾e drajvere za va¹e usb ureKjaje."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Pokreæe X Font server (potrebno za pokretanje XFree)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Izaberite koje servisi  treba automatski da se startuju pri boot-anju"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "©tampaè"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "Sistemski mod"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Opcije za udaljeni lpd"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "Server,Baze podataka"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "ureðaj"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "pokrenuto"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "zaustavljeno"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servisi i demoni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"¾alim ali nema dodatnih informacija\n"
-"o ovom servisu."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Pri startanju"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instaliram paket %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ne mogu proèitati tabelu particija, mnogo je iskvarena za mene :(\n"
-"Poku¹aæu dalje zaobilazeæi lo¹e particije"
-
-#: ../../standalone/drakautoinst_.c:44
-#, fuzzy
-msgid "Error!"
-msgstr "Gre¹ka"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Postinstalaciona konfiguracija"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Konfiguracija stila startanja"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "èestitam !"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Deljenje internet konekcije"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Deljenje internet konekcije je trenutno omoguæeno "
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Pode¹avanje deljenja internet konekcije je veæ zavr¹eno.\n"
-"Trenutno je omoguæeno.\n"
-"\n"
-"¹ta ¾elite da uradite?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "onemoguæi"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "ukloni"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "ponovo podesi"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Uklanjam servise..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Deljenje internet konekcije je onemoguæeno."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Deljenje internet konekcije je trenutno onemoguæeno"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Pode¹avanje deljenja internet konekcije je veæ zavr¹eno.\n"
-"Trenutno je onemoguæeno.\n"
-"\n"
-"¹ta ¾elite da uradite?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "omoguæi"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr ">Omoguæavam servisi..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Deljenje internet konekcije je omoguæeno."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Va¹ kompjuter mo¾ete podesiti za deljenje njegove Internet konekcije.\n"
-"sa ovom opcijom, drugi kompjuteri na va¹oj lokalnoj mre¾i æe moæi da "
-"koristeInternet konekciju sa ovog kompjutera.\n"
-"\n"
-"Napomena: potrebana vam je mre¾na kartica da bi podesili lokalnu mre¾u"
-"(LAN).\n"
-"\n"
-"Da li ¾elite da podesite deljenje Internet konekcije ?"
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfejs %s (koristeæi modul %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Interfejs %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Nema mre¾nog adaptera u va¹em sistemu !"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nije detektovana nijedna mre¾na kartica. Pokrenite alat za konfigurisanje "
-"hardvera."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Mre¾ni interfejs"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Postoji samo jedan konfigurisan mre¾ni adapter na va¹em sistemu:\n"
-"\n"
-"%s\n"
-"\n"
-"Sada podeavam va¹u lokalnu mre¾u sa ovim adapterom."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Izaberite koji æe mre¾ni adapter biti kori¹ten za LANmre¾u."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Upozorenje, mre¾ni adapter je veæ konfigurisan. Ja æu ga sada "
-"rekonfigurisati."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Potencijalni konflikt LAN adrese u trenutnom konfig. %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Detektovana Firewalling konfiguracija"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Upozorenje ! Postojeæa firewalling konfiguracija je detektovana. Mo¾daæe "
-"biti potrebno ruèno pode¹avanje nakon instalacije."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Konfiguracija u toku..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Konfigurisanje skripti,instalacija softvera, startanje servisa..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemi pri instalaciji %s paketa"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Sve je pode¹eno.\n"
-"Sada mo¾ete deliti Internet konekciju sa drugim kompjuterima na va¹oj "
-"lokalnoj mre¾i  (LAN), koristeæi automatsku mre¾nu konfiguraciju (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Pode¹avanje deljenja internet konekcije je veæ zavr¹eno ali je trenutno "
-"onemoguæeno."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"Pode¹avanje deljenja internet konekcije je veæ zavr¹eno i trenutno je "
-"omoguæeno."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Do sada Deljenje internet konekcije nije pode¹avano."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Konfiguracija Deljenja Internet konekcije"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Dobrodo¹li u alat za pode¹avanje Deljenja Internet konekcije\n"
-"%s\n"
-"\n"
-"Kliknite na Podesi (Configure) da bi pokrenuli pode¹avanje."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Pode¹avanje mre¾e (%d adaptera)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Ukloni profil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Profil za brisanje:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Novi profil..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Ime hosta:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Internet pristup"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Tip:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Interfejs:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Konektovan"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Nije konektovan"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Konektovanje..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Diskonektovan..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Startujem konekciju..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Zatvaram konekciju..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Konekcija je zatvorena.\n"
-"Poku¹ajte da to uradite ruèno pokretanjem\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"kao root."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Sistem je sada diskonektovan."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Podesi Internet pristup..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "LAN konfiguracija"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Drajver"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Interfejs"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "State"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Podesi lokalni mre¾u..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Promeni"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Samo momenat... primena konfiguracije"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Vi nemate ni jedan interfejs koji je pode¹en.\n"
-"Morate ih prvo podesite klikom na 'Configure'"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "LAN konfiguracija"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Startni(Boot) protokol"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Pokrenuto pri startanju"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "activate now"
-msgstr "Aktiviraj"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "desactivate now"
-msgstr "Aktiviraj"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Vi nemate ni jednu pode¹enu Internet konekciju.\n"
-"Kreirajte je klikom na 'Configure'"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Konfiguracija Internet konekcija"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Konfiguracija Internet Konekcija"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Tip konekcije: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parametri"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Mre¾na kartica"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Dobro¹li kod Krakera"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Bedna"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoidna"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Na ovom nivou treba obratiti pa¾nju. On pravi va¹ sistem lak¹im\n"
-"za upotrebu, ali i  veoma osetljivim: ne sme biti kori¹ten na ma¹ini\n"
-"koja je povezana sa drugim ma¹inama ili na internet. Ovde ne postoji\n"
-"pristup sa lozinkom."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Lozinke su sada omoguæene, ali se i dalje ne preporuèuje da se koristi\n"
-"kao mre¾ni raèunar."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Od nekoliko pobolj¹anja na ovom sigurnosom nivou, najznaèajniji\n"
-"je poveæan broj sigurnosnih upozorenja i provera."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Ovo je standardno sigurnosno okru¾enje preporuèeno za raèunare\n"
-"koji  æe biti  kor¹æeni za vezu sa Internetom ili kao klijent.\n"
-"Ne postoje sigurnosne provere."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Sa ovim sigurnosnim nivoom, kori¹æenje ovog sistema kao servera\n"
-"postaje moguæe. Sigurnost je sada dovoljno velika za kori¹æenje\n"
-"ma¹ine za server koji prihvata konekcije brojnih klijenata."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Ukljuèujete nivo 4 opcija, ali je sada sistem potpuno zatvoren.\n"
-"Sigurnosne opcije su maksimalne."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "Pode¹avanje sigurnosnog nivoa"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Opcije za server"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Pode¹avanje sigurnosnog nivoa"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrolni Centar"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Izaberite alat koje ¾elite da koristite"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "upotreba: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Da li ¾elite da BackSpace da vrati Delete u konzolu?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Promeni Cd-Rom"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Ubacite va¹ Instalacioni CD u pogon i pritisnite OK kada ste spremni.\n"
-"Ukoliko ga nemate pritisnite Poni¹ti da bi izbegli live upgrade."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ne mogu da startujem live upgrade !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "nije pronaðen serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Da imitiram rad 3 tastera?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Firewalling konfiguracija"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Firewalling konfiguracija"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"Vi ste veæ podesili firewall.\n"
-"Kliknite na Podesi(Configure) da bi izmenili ili uklonili firewall"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"Kliknite na Podesi(Configure) da bi podesili standardni firewall"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Izaberite jezik"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Izaberite inst.klasu"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detekcija hard diska"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Pode¹avanje mi¹a"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Izaberi tastaturu"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sigurnost"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Podesi datoteène sisteme"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatiraj particije"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Paketi za instalaciju"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instaliraj sistem"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Dodaj korisnika"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Podesi mre¾u"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Podesi servise"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Napravi startni disk"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Instaliraj starter"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfigurisanje X-a"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Izlaz iz instalacije"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Mali firewall konfigurator\n"
-"\n"
-"On konfiguri¹e lièni firewall za ovu Mandrake Linux ma¹inu.\n"
-"Za moæno firewall re¹enje, pogledajte\n"
-"specijalizovanu MandrakeSecurity Firewall distribuciju."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Sada æemo vam postaviti pitanja o tome koje servise bi hteli da dozvolite\n"
-"da se pove¾u na Internet.  Razmislite pa¾ljivo o ovome\n"
-"pitanju, jer je bezbednost va¹eg kompjutera va¾na.\n"
-"\n"
-"Ukoliko trenutno ne koristite jedan od ovih servisa, uklonite firewall\n"
-"sa njih.  Mo¾ete promeniti ove opcije bilo kada ponovnim pokretanjem\n"
-"ove aplikacije!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Da li pokreæete web server na ovoj ma¹ini koji treba da bude viðen\n"
-"na celom Internetu? Ukoliko pokreæete webserver koji treba da bude viðen\n"
-"samo sa ove ma¹ine, ovde mo¾ete da bezbedno odgovorite NE.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Da li pokreæete name server na ovoj ma¹ini? Ukoliko niste podesili jo¹ "
-"jedan\n"
-"za away IP i zonske informacije za celi Internet, molim\n"
-"vas da odgovorite ne.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Da li ¾elite da dozvolite Secure Shell (ssh) konekcije? Ovo\n"
-"je zamena za telnet koju mo¾ete koristiti za prijavu. Ukoliko koristite\n"
-"telnet, trebali bi da se prebacite na ssh. Telenet nije\n"
-"enkriptovan -- tako da neki napadaèi mogu ukrasti lozinku ukoliko je\n"
-"koristite. ssh je enkriptovan i ne dozovoljava ovakve stvari."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Da li ¾elite da dozvolite telnet konekcije?\n"
-"Ovo je u¾asno nesiguno, kako smo i objasnili na prethosnom ekranu. Mi\n"
-"vam preporuèujemo da ovde odgovorite NE i da koristite ssh umesto\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Da li pokreæete FTP server koji vam je potreban\n"
-"za Internet? Ukoliko to radite, preporuèujemo ga koristite samo za\n"
-"Anonymous transfere. Bilo koja lozinka poslata preko FTP mo¾e biti\n"
-"meta napadaèa, po¹to  FTP takoðe koristi nekritovane lozinke.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Da li pokreæete mail server? Ukoliko ¹aljete poruke preko\n"
-"pine, mutt ili nekog drugog tekstualnog mail klijenta,\n"
-"onda to verovatno koristite.  Inaèe, trebali bi da uklonite firewall za "
-"ovo.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Da li pokreæete POP ili IMAP server? Ovo bi koristili \n"
-"za host-ovanje non-web-baziranih  mail raèuna za ljude preko\n"
-"ove ma¹ine.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Izgleda da koristite 2.2 kernel.  Ukoliko je va¹ mre¾ni IP\n"
-"automatski pode¹en za kompjuter u va¹oj kuæi ili na poslu \n"
-"(dodeljeno dinamièki), treba da ga omoguæimo za ovo.  Da\n"
-"li je ovo u pitanju?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Da li va¹ kompjuter dobija vreme sinhronizovano sa drugim kompjuterom?\n"
-"Uglavnom se ovo koristi na srednjim-velikim Unix/Linux organizacijama\n"
-"radi sinhronizacije vremena prijave ili za sliène stvari.  Ukoliko niste "
-"deo\n"
-"velike firme ili niste èuli za ovo, onda zaobiðite \n"
-"ovo."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfiguracija zavr¹ena. Da li da zapi¹emo ove izmene na disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ne mogu da otvorim  %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ne mogu da otvorim %s radi upisa: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Server, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Mre¾ni kompjuter, (klijent)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, SSH server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Alati za Palm Pilot ili Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Server, Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Office programi: tekst procesori (kword, abiword), tabele (kspread, "
-"gnumeric), pdf preglednici, itd"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio alati: mp3 ili midi plejeri,mikseri, itd"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knjige i Kako? (Howto's) za Linux i Besplatni Softver"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE padna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itd"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedija - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Set alata za el.po¹tu, vesti, web, transfer datoteka, ili chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Server,Baze podataka"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Alati za lako konfigurisanje kompjutera"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedija - Zvuk"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Alati"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentacija"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konzolni alati"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet stanica"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedijalna stanica"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN konfiguracija"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Jo¹ grafièkih okru¾enja (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop okru¾enje, osnovno grafièko okru¾enje sa kolekcijom prateæih alata"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafièko Okru¾enje"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Razvojna"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Alati za kreiranje i pr¾enje CDa"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Radna(Office) stanica"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, itd"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafièki programi kao ¹to je Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C i C++ razvojne biblioteke, programi  i propratne datoteke"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Mre¾ni Server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Server, El.po¹ta/Groupware/Vesti"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Stanica za igru"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video plejeri i editori"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedija - Grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Zabavni programi: arkade, ige na tabli, strategije, itd"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Skup alata za èitanje i slanje el.po¹te i vesti (pine, mutt, tin..) i za "
-"pretra¾ivanje Interneta"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arhiviranje, emulatori, monitoring"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Liène finansije"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafièka okru¾enja za setom korisnièkNFS server, SMB server, Proxy serverNFS "
-"server, SMB server, Proxy serverih aplikacija i desktopalata"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klijenti za razlièite protokole ukljuèujuæi i ssh"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Internet pristup"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programi za pu¹tanje zvuka i videa"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Drugi grafièki desktopovi"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "editori,¹elovi, alati za datoteke, terminali"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programi za upravljanje va¹im finansijama, kao ¹to je gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Igre"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Upravljanje privatnim informacijama"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedija - CD pr¾enje"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Nauèna radna stanica"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "ne mogu otvoriti /etc/sysconfig/autologin za èitanje: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Da li hoæete da restartujete mre¾e?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Da li se sla¾ete?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Sadam treba da se restartuje mre¾ni interfejs:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Sada treba da se restartuje mre¾ni ureðaj  %s. Da li se sla¾ete ?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Ukoliko nije drugaèije odreðeno, oubièajen izbor je \"/dev/hda\"\n"
-#~ "(master disk na primarnom kanalu) ili \"/dev/sda\" (first SCSI disk)."
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Ovo su postavljne opcije.\n"
-#~ "Mo¾ete dodati nove ili izmeniti stare."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Vreme konekcije: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Izaberite default (osnovnog) korisnika:"
-
-#~ msgid "Spooler: "
-#~ msgstr "Sistem za ¹tampanje (Spooler): "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Sada testirajte mi¹a"
-
-#~ msgid "Press next to continue."
-#~ msgstr "Pritisnite \"Sledeæi\" da bi nastavili "
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "Izaberite vama odgovarajuæi jezik za instaliranje i kori¹æenje sistema."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Morate da prihvatite uslove licence da bi nastavili instalaciju.\n"
-#~ "\n"
-#~ "\n"
-#~ "Molim vas da pritisnete na \"Prihvatam\" ukoliko se sla¾ete sa uslovima.\n"
-#~ "\n"
-#~ "\n"
-#~ "Molim vas da pritisnete na \"Odbijam\" ukoliko se ne sla¾ete sa uslovima."
-#~ "Instalacijaæe biti zav¹ena bez imakvih promena"
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Izaberite tip komunikacije sa tastaturom od gore navedenih"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Izaberite:\n"
-#~ "\n"
-#~ " - Sa pode¹avanjima (Customized): Ukoliko ste upoznati sa Linux-om moæi "
-#~ "æete\n"
-#~ "da izaberete normal,development ili server mod instalacije.\n"
-#~ "Izaberite \"Normal\" instalaciju pri uobièajenom kori¹æenju raèunara\n"
-#~ "Mo¾ete izabrati \"Development\" instalaciju ukoliko æete se prvenstveno\n"
-#~ "razvojem softvera, ili \"Server\" ukoliko ¾elite da postavite standardnu\n"
-#~ "server ma¹inu (za po¹tu, ¹tampanje...)\n"
-#~ "\n"
-#~ "\n"
-#~ " - Ekspert: Ukoliko ste dobro poznajte GNU/Linux i ¾elite izuzetno\n"
-#~ "podesivu instalaciju onda je ovo pravi mod za vas. Moæi æete izabrati\n"
-#~ "kori¹æenje sistema kao \"Preporuèeno\"."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Sada morate definisati za ¹ta æete koristiti va¹u ma¹inu.Va¹ izbor je:\n"
-#~ "\n"
-#~ "  - Radna stanica : ovo je idealan izbor ukoliko nameravate da koristite "
-#~ "va¹e ma¹inuuglavnom za svakodnevnu upotrebu  (obrada teksta,tablice, "
-#~ "grafika itd).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Razvojna stanica: samo joj  ime ka¾e. Izaberite ovo ukoliko imate "
-#~ "nameru da va¹u ma¹inu uglavnom koristite za razvoj softvera. Tada æe te "
-#~ "imati kompletnu\n"
-#~ "kolekciju softvera  za kompajliranje, debagiranje i formatiranje\n"
-#~ "izvornog koda, ili za kreiranje softverskoih paketa.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Server: izaberite ovo ukoliko imate nameru da Mandrake Linux\n"
-#~ "koristite kao server. Ili kao fajl server (NFS ili  SMB),\n"
-#~ "ili server protokol za ¹tampu(Unix' lp (Line Printer ili  Windows  SMB\n"
-#~ "¹tampanje) ili  autentièni server (NIS), ili kao server za bazu  podataka "
-#~ "itd.\n"
-#~ "Kao takav, on neæe imati instaliran luksuz (KDE, GNOME...) ."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Sada mo¾ete izabrati grupu paketa koje ¾elite\n"
-#~ "da instalirate. ili a¾urirate.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX æe zatim proveriti da li imate mesta za njihovo instaliranje."
-#~ "Ukoliko nema,\n"
-#~ "on æe vas upozoriti na to. Ukoliko ¾elite da nastavite, nastaviæe se "
-#~ "instalacija\n"
-#~ "svih odabranih grupa ali æe neki paketi od manjeg znaèaja biti "
-#~ "izostavljeni.Na kraju liste\n"
-#~ "mo¾ete izabrati opcijy \"Pojedinaèna selekcija paketa\";\n"
-#~ "U tom sluèaju moraæete birati izmeðu vi¹e od 1000 paketa..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Sada mo¾ete ruèno izabrati sve pakete koje\n"
-#~ "¾elite da instalirate.\n"
-#~ "\n"
-#~ "\n"
-#~ "Mo¾ete da ra¹iriti ili skupiti stablo klikajuæi na opcije koje se nalazeu "
-#~ "uglu\n"
-#~ "prozora sa paketima.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko ¾elite da vidite pakete sortirane po abecednom redu, kliknite na "
-#~ "ikonu\n"
-#~ "\"Postavi ravno i grupno sortirano\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko ne ¾elite da budete upozoreni na zavisnosti, kliknite na "
-#~ "\"Automatske\n"
-#~ "zavisnosti\". Ukoliko ovo ¾elite, zapamtite da deselektovanje jednog "
-#~ "paketa mo¾e neprimeæeno\n"
-#~ "da deselektuje i nekoliko drugih paketa koji zavise od njega."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Ukoliko imate sve gore navedene CD-ove, kliknite na Ok.\n"
-#~ "Ukoliko nemate nijedan CD, kliknite na Cancel.\n"
-#~ "Ako vam nedostaju  neki CD-ovi, deselektujete ih,a onda,\n"
-#~ "kliknite na Ok."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "Sada mo¾ete da testirate va¹eg mi¹a. Koristite tastere i toèkins and "
-#~ "wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Ukoliko ¾elite da konektujte kompjyter na Internet ili\n"
-#~ "na lokalnu mre¾u izaberite pravu opciju. molim Vas da ukljuèiteureðaj\n"
-#~ "pre biranja prave opcije da bi dozvolili DrakX-u da ga auomatski "
-#~ "detektuje.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko nemate vezu sa Internetom ili lokalnom mre¾om, izaberite\n"
-#~ "\"Iskljuèi mre¾u\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko ¾elite da kasnije uradite konfiguraciju (nakon instalacije)ili "
-#~ "ste\n"
-#~ "zavr¹ili konfigurisanje, izaberite \"Zavr¹eno\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Nijedam modem nije detektovan. Izaberite serijski port na kojem jemodem "
-#~ "prikljuèen.\n"
-#~ "\n"
-#~ "\n"
-#~ "Da bi shvatili, prvi serijski portserial port (koji se zove \"COM1\" pod "
-#~ "Microsoft\n"
-#~ "Windows-om) se zove \"ttyS0\" pod Linux-om."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Sada mo¾ete uneti dialup postavke. Ukoliko ne znate ili \n"
-#~ "ili niste sigurni ¹ta da unesete, prave informacije mo¾ete dobitiod\n"
-#~ "va¹eg Internet provajdera. Ukoliko ne unesete DNS (ime servera)\n"
-#~ "informaciju sada,ovu informaciju mo¾ete imati kada se konektujetena "
-#~ "servis\n"
-#~ "va¹eg Internet provajdera."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Ukoliko imate eksterni modem ukljuèite ga, da bi DrakX mogao automatski "
-#~ "da ga detektuje."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Ukljuèite va¹ modem i izaberite pravi"
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Ukoliko niste sigurni da su gore navedene informacije\n"
-#~ "ispravne ili niste sigurni ¹ta treba da unesete, prave\n"
-#~ "informacije mo¾ete dobaviti od va¹eg Internet provajdera. Ukoliko ovdene\n"
-#~ "unsete DNS (ime servera) informacije, ovu informaciju mo¾etedobaviti\n"
-#~ "od va¹eg Internet provajdera kada se konektujete."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Sada mo¾ete uneti ime host-a ukoliko je potrebno. Ukoliko niste sigurni "
-#~ "¹ta da unesete,\n"
-#~ "ispravne informacije æete pronaæi kod va¹eg ISP-a."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Sada mo¾ete podesiti mre¾nu karticu:\n"
-#~ "\n"
-#~ " - IP adresa: ukoliko je ne znate, kontaktirajte mre¾nog administratora "
-#~ "ili ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Mre¾na maska: \"255.255.255.0\" je veæinom dobar izbor. Ukoliko niste\n"
-#~ "sigurni, kontaktirajte mre¾nog administratora ili ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Automatski IP: ukoliko va¹a mre¾a koristi bootp ili dhcp protokole,\n"
-#~ "izaberite ovu opciju. Ukoliko je selektovana, nije potrebna vrednost u\n"
-#~ "\"IP adresa\". Ukoliko niste sigurni, kontaktirajte mre¾og administratora "
-#~ "ili ISP."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Sada mo¾ete uneti ime host-a ukoliko je potrebno. Ukoliko niste sigurni "
-#~ "¹ta da unesete,\n"
-#~ "sigurni kontaktirajte va¹eg administratora."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Sada mo¾ete uneti ime host-a ukoliko je potrebno.\n"
-#~ "Ukoliko niste sigurni ¹ta da unesete, ostaite prazno."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Sada unosite dialup opcije. Ukoliko niste sigurni ¹ta da unesete,\n"
-#~ "ispravne informacije æete pronaæi kod va¹eg ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Ukoliko koristite proksije, konfiguri¹ite ih sada. Ukoliko ne znate\n"
-#~ "da li æete ih koristiti, konsultujte mre¾og administratora ili ISP."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Mo¾ete instalirati kriptografski paket ukoliko je internet konekcija\n"
-#~ "pravilno pode¹ena. Prvo izaberite prostor gde æete download-ti pakete\n"
-#~ "i nakon toga izabrati pakete koje æete instalirati.\n"
-#~ "\n"
-#~ "\n"
-#~ "Morate izabrati mirror i kripto paket\n"
-#~ "vodeæi raèuna o zakonima."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr ""
-#~ "Sada mo¾ete podesiti vremensku zonu u zavisnosti od mesta gde ¾ivite"
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Mo¾ete podesiti lokalni ¹tampaè (koji je povezan na kompjuter) ili "
-#~ "udaljeni\n"
-#~ "¹tampaè (kojem mo¾ete pristupiti preko Unix, Netware ili  Microsoft "
-#~ "Windows mre¾e)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Ukoliko ¾elite da imate moguænost da ¹tampate, morate da izaberete sistem "
-#~ "za ¹tampanje izmeðu\n"
-#~ "CUPS ili LPR-a.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS je novi, moæni i fleksibilni sistem za ¹tampanje za Unix sisteme "
-#~ "(CUPS\n"
-#~ "je skraæenica za \"Common Unix Printing System\"). On je postavljen za "
-#~ "default sistem za ¹tampanje u\n"
-#~ "Mandrake Linux-u.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR je stari sistem za ¹tampanje koji se koristio u prethodnim Mandrake "
-#~ "Linux distribucijama.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko nemate ¹tampaè, kliknite na \"Nema\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux mo¾e da radi sa velikim brojem ¹tampaèa. Svaki od tipova "
-#~ "¹tampaèa zahteva\n"
-#~ "drugaèije pode¹avanje.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko je va¹ ¹tampaè fizièki vezan za kompjuter, izaberite opciju  "
-#~ "\"Lokalni\n"
-#~ "¹tampaè\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko ¾elite da pristupite ¹tampaèu koji se nalazi na udaljenoj Unix "
-#~ "ma¹ini, izaberite\n"
-#~ "\"Udaljeni ¹tampaè\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko ¾elite da pristupite ¹tampaèu koji se nalazi na udaljenoj "
-#~ "Microsoft Windows ma¹ini\n"
-#~ "(ili na Unix ma¹ini koristeæi SMB protokol), izaberite \"SMB/Windows "
-#~ "95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Molim vas da upalite ¹tampaè pre nego ¹to nastavite da bi DrakX mogao da "
-#~ "ga detektuje.\n"
-#~ "\n"
-#~ "Ovde æete morati da uneste neke podatke.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Ime ¹tampaèa: ¹tampaèev spooler koristi \"lp\" kao default ime za "
-#~ "¹tampaè. Dakle, morate imati ¹tampaè koji se zove \"lp\".\n"
-#~ "     Ukoliko imate samo jedan ¹tampaè, mo¾ete koristiti vi¹e imena za "
-#~ "njega. Treba samo da  ih odvojite pipe\n"
-#~ "     karakterom (tj. \"|\"). Dakle, ukoliko volite ime koje ne¹to i "
-#~ "znaèi, morate da ga postavite na prvo mesto, na primer: \"Moj ¹tampaè|lp"
-#~ "\".\n"
-#~ "     ¹tampaè koji ima\"lp\" u svom imenu(nima) æe biti default ¹tampaè.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Opis: ovo nije obavezna funkcija ali mo¾e biti korisna ukoliko je "
-#~ "vi¹e ¹tampaèapovezano na va¹ kompjuter ili ukoliko ¾elite da dozvolite "
-#~ "pristup\n"
-#~ "     drugim kompjuterima na ovaj ¹tampaè.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Lokacija: ukoliko ¾elite date neke informacije o lokaciji va¹eg\n"
-#~ "     ¹tampaèa, onda to mo¾ete ovde uraditi (ovde mo¾ete upisati bilo "
-#~ "¹ta,\n"
-#~ "     na primer \"drugi sprat\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Ovde morate da unesete neke informacije.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Ime ¹tampaèa: ¹tampaèev spooler koristi \"lp\" kao default ime "
-#~ "¹tampaèa. Pa tako morate da imate ¹tampaè sa imenom \"lp\".\n"
-#~ "    Ukoliko iamte samo jedan ¹tampaè, mo¾ete da mu date vi¹e imena. Samo "
-#~ "ihodovojite pipe\n"
-#~ "    karakterom (tj. \"|\"). Dakle, ukoliko vi¹e volite imane sa "
-#~ "znaèenjem, onda ga morae staviti na prvo mesto, na primer: \"Moj ¹tampaè|"
-#~ "lp\".\n"
-#~ "    ¹tampaè koji ima\"lp\" u svom imenu je ujedno i default ¹tampaè.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool direktorijum: to je direktorijum u kojem se nalaze zadati "
-#~ "poslovi za ¹tampanje. Zadr¾ite default izbor\n"
-#~ "     ukoliko ne znate ¹ta da koristite\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Konektovanje ¹tampaèa: Ukoliko je ¹tampaè fizièki vezan za "
-#~ "kompjuter, izaberite \"Lokalni ¹tampaè\".\n"
-#~ "     Ukoliko ¾elite da pristupite ¹tampaèu koje lociran na udaljenoj Unix "
-#~ "ma¹ini, izaberite \"Udaljeni lpd ¹tampaè\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Ukoliko ¾elite da pristupite ¹tampaèu koje lociran na udaljenoj "
-#~ "Microsoft Windows  ma¹ini (ili na Unix ma¹ini koristeæi SMB\n"
-#~ "     protokol), izaberite \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Ukoliko ¾elite da pristupite ¹tampaèu koje lociran na NetWare mre¾i, "
-#~ "izaberite\"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Va¹ ¹tampaè nije detektovan. Unesite ime ureðaja/porta na\n"
-#~ "koji je prikljuèen.\n"
-#~ "\n"
-#~ "\n"
-#~ "Za va¹u informaciju, veæina ¹tampaèa je povezana na prvi paralelni port. "
-#~ "A taj port\n"
-#~ "se naziva \"/dev/lp0\" pod GNU/Linux-om i  \"LPT1\" pod  Microsoft "
-#~ "Windows-om."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Sada morate izabrati va¹ ¹tampaè sa gornje liste"
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Molim vas izaberite prave opcije koje su u skladu sa va¹im ¹tampaèem.\n"
-#~ "Pogledajte i dokumentaciju koju  ste dobili uz ¹tampaè ukoliko ne znate "
-#~ "¹ta to ovde birate.\n"
-#~ "\n"
-#~ "\n"
-#~ "Moæi æete da testirate svoju konfiguraciju u sledeæem koraku i moæi æete "
-#~ "da menjatemoæi æete da je menjate ukoliko neradti kako vi ¾elite."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Sada, mo¾ete uneti  root lozinku za va¹ Mandrake Linux sistem.\n"
-#~ "Lozinka mora biti uneta dva puta radi verifikacije da su oba unosa\n"
-#~ "lozinki ista.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root je administrator sistema, i jedni korisnikkoji\n"
-#~ "mo¾e da modifikuje sistemske opcije. Zbog toga,\n"
-#~ "birajte lozinku pa¾ljivo! Nedozvoljeni pristup na root raèun mo¾ebiti "
-#~ "veoma opasan\n"
-#~ "za bezbednost sistema i podataka, kao i drugih povezanih sistema.\n"
-#~ "\n"
-#~ "\n"
-#~ "Lozinka treba da me¹avina alfanumerièkih\n"
-#~ "karaktera i najmanje 8 karaktera dugaèka.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Nikada* je ne zapisujte na papir. Ne pravite lozinku previ¹edugom\n"
-#~ "i komplikovanom, jer je morate upamtiti bez mnogo napora."
-
-#~ msgid ""
-#~ "If your network uses LDAP (or NIS) protocol for authentication, select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "Ukoliko va¹a mre¾a koristi LDAP (ili NIS) protokol za identifikaciju, "
-#~ "izaberite\n"
-#~ "\"LDAP\" (ili \"NIS\") kao identifikaciju. Ukoliko ne znate, pitajte "
-#~ "va¹eg mre¾nog\n"
-#~ "administratora.\n"
-#~ "\n"
-#~ "Ukoliko va¹ kompjuter nije pozvezan ni na jednu administriranu mre¾u, "
-#~ "mo¾da ¾elite da\n"
-#~ "izaberete \"Lokalne datoteke\" za identifikaciju."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Sada mo¾ete kreirati jedan ili vi¹e obiènih \"regular\" korisnièkih\n"
-#~ "raèuna, nasuprot privilegovanom \"privileged\" korisnièkom raèunu, root.\n"
-#~ "Mo¾ete kreirati jedan ili vi¹e raèuna za svaku osobu koja ¾eli koristiti\n"
-#~ "raèunar. Nema limita. Svaki korisnik æe imati sopstveno pode¹ene "
-#~ "parametre\n"
-#~ "(grafièko okru¾enje, kao i svoj home direktorijum \"Osnovna direktorijum"
-#~ "\",\n"
-#~ "u kojem se ovi parametri i nalaze.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pre svega, napravite raèun za va¹ same! Èak i ukoliko æete biti jedini\n"
-#~ "korisnik na raèunaru, NE treba da se konektujete kao root za svakodnevnu\n"
-#~ "upotrebu sistema: to je veoma veliki sigurnosni rizik. Mo¾ete sistem\n"
-#~ "uèiniti nestabilnim ili ga èak onesposobiti ¹to je èesta pojava !\n"
-#~ "Zbog toga, TREBA da se konektujete koristeæi obièan korisnik . Raèun "
-#~ "koji\n"
-#~ "æete kreirati ovde, a root raèun koristiti SAMO pri administriranju ili\n"
-#~ "odr¾avanju sistema."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Kreiranje startne(boot) diskete je vrlo preporuèljivo. Ukoliko ne mo¾ete "
-#~ "da\n"
-#~ "startujete kompjuter, to je jedini naèin da spasite sistem od\n"
-#~ "reinstalacije."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Glavne opcije za LILO i grub su:\n"
-#~ "  - Boot ureðaj: Pode¹ava ime ureðaja (npr. hard disk particije)\n"
-#~ "koji sadr¾i boot sektor. Ukoliko drugaèije nije odreðeno,\n"
-#~ "izaberite \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pauza pre startanja default image-a: Specificira broj u desetim "
-#~ "delovima\n"
-#~ "sekunde za koji starter treba da èeka pre startanja prvog image-a.\n"
-#~ "Ovo je korisno na sistemima koji odmah startaju sa hard diska posle\n"
-#~ "detekcije tastaure. Starter ne èeka ukoliko je  \"delay\" \n"
-#~ "prazno ili pode¹eno na 0 - nula .\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mod: Ovaj mod pode¹ava VGA tekst mod koji se bira pri\n"
-#~ "startanju. Moguæe su sledeæe vrednosti: \n"
-#~ "\n"
-#~ "    * normalno: koristi normalni 80x25 tekst mod.\n"
-#~ "\n"
-#~ "    * <broj>: koristi korespondentni tekst mod.\n"
-#~ "\n"
-#~ "  - Oèisti \"/tmp\" pri svakom startanju : ukoliko ¾elite da uklonite sve "
-#~ "datoteke i direktorijume\n"
-#~ "koji sse nalaze u \"/tmp\" kada startuje sistem, selektujte ovu opciju.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Defini¹ite RAM ukoliko je potrebno: na ¾alost, ne postoji standardni "
-#~ "metod  upit\n"
-#~ "BIOS-u o velièini RAM prisutnog u va¹em kompjuteru. Kao posledica toga, "
-#~ "Linux mo¾e\n"
-#~ "fpogre¹no detektovati velièinu RAM memorije. Ukoliko se to desi, mo¾ete\n"
-#~ "ovde sami uneti pravu velièinu RAMa. Zapamtite da razlika u  2 ili 4\n"
-#~ "MB izmeðu detektovane i stvarne velièine RAMa u sistemu Ùeste normalna "
-#~ "stvar."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO je starter za SPARC: on mo¾e da starta\n"
-#~ "ili Linux ili bilo koji  drugi  operativni sistem prisutan na va¹em "
-#~ "kompjuteru.\n"
-#~ "Naravno, ovi drugi operat.sistemi su ispravno detektovani i "
-#~ "instalirani. \n"
-#~ "Ukoliko to nije tako,mo¾ete to sami urediti ovde.Pazite kada unosite "
-#~ "parametre\n"
-#~ "\n"
-#~ "\n"
-#~ "Takoðe,mo¾ete ¾eleti da ostalim operat.sistemima onemoguæite da pristupe "
-#~ "drugi \n"
-#~ "U tom sluèaju, treba da izbri¹ete odgovarajuæe linije za te sisteme. Ali\n"
-#~ "onda morate imati boot diskete da bi ih startali !"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO glavne opcije su:\n"
-#~ "  - Instalacija startera: naznaèite gde ¾elite da smestite informacije\n"
-#~ "potrebne za startanje Linux-a.Ukoliko ne znate taèno ¹ta radite,\n"
-#~ "izaberite \"Prvi sektor hard diska (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pauza pre startanja default image-a: Specificira broj u desetim "
-#~ "delovima\n"
-#~ "sekunde za koji starter treba da èeka pre startanja prvog image-a.\n"
-#~ "Ovo je korisno na sistemima koji odmah startaju sa hard diska posle\n"
-#~ "detekcije tastaure. Starter ne èeka ukoliko je  \"delay\" \n"
-#~ "prazno ili pode¹eno na 0 - nula ."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Sada je do¹lo vreme da podesimo X Window sistem, koji je\n"
-#~ "jezgro Linux GUI-a (Linux Grafièko Korisnièko Okru¾enje). U tu svrhu,\n"
-#~ "morate konfigurisati va¹u video kartu i monitor. Veæinom\n"
-#~ "su ovi postupci automatizovani, tako da se va¹ posao mo¾e\n"
-#~ "svesti na potvrðivanje onog ¹to je uraðeno i prihvatanje\n"
-#~ "pode¹enih opcija :-)\n"
-#~ "\n"
-#~ "\n"
-#~ "Kada konfiguracija bude zavr¹ena, X-ovi æe se podiæi (osim ako\n"
-#~ "ka¾ete DrakX-u da to ne radi!) tako da mo¾ete isprobati da li je\n"
-#~ "sve pode¹eno kako valja. Ako se ne podignu, vratite se korak nazad\n"
-#~ "i promenite pode¹avanje koliko god puta je potrebno."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Ukoliko je ne¹to pogre¹no u X konfiguraciji, koristite ove opcije\n"
-#~ "da bi ispravno podeesili X Window sistem."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Ukoliko vi¹e volite logovanje u grafièkom modu, izaberite \"Da\".\n"
-#~ "U suprotnom izaberite \"Ne\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Mo¾ete izabrati sigurnosni nivo za va¹ sistem. Pogledajte upustvo za "
-#~ "vi¹e\n"
-#~ "  informacija. U osnovi, ukoliko ne znate ¹ta da odaberetee, ostavite "
-#~ "default opciju.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Sistem æe se resetovati.\n"
-#~ "\n"
-#~ "Posle resetovanja, va¹ novi Mandrake Linux sistem æe se podiæi "
-#~ "automatski.\n"
-#~ "Ukoliko ¾elite da podignete neki drugi instalirani operativni sistem,\n"
-#~ "proèitate upustvo ili posetite neki od Linux chat kanala."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Èe¹ki (Programeri)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovaèki (Programerski)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Ime profila koji se kreira:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Ispi¹i /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "Povrati (restore) iz datoteke"
-
-#~ msgid "Save in file"
-#~ msgstr "Snimi u datoteku"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Povrati (restore) sa diskete"
-
-#~ msgid "Format all"
-#~ msgstr "Formatiraj sve"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Posle formatiranja svih particija,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "svi podaci na njima æe biti uni¹teni"
-
-#~ msgid "Reload"
-#~ msgstr "Ponovo unesi"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Da li ¾elite da kreirate autoinstalacioni flopi za replikaciju linux-a ?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL konfiguracija"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Sa udaljenim CUPS serverom, ne morate da kofiguri¹ete\n"
-#~ "ovde ni jedan ¹tampaè; ¹tampaèi æe biti automatski detektovani.\n"
-#~ "osim ako imate server na drugoj mre¾i; ako je to\n"
-#~ "sluèaj, morate dati IP adresu  CUPS servera\n"
-#~ "a opciono i broj porta."
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "Unesite Ime ¹tampaèa i Komentare"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Nedostaje ime za udaljeni red!"
-
-#~ msgid "Pipe into command"
-#~ msgstr "Ubaci u komandu"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "Ovde mo¾ete odrediti bilo koju komandnu liniju na koju bi ¹tampaè poslao "
-#~ "zadatak umesto da ga po¹alje direktno na ¹tampu."
-
-#~ msgid "Command line"
-#~ msgstr "Komandna linija"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "Komandna linija mora biti une¹ena!"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Monitoring mre¾e"
-
-#~ msgid "Settings"
-#~ msgstr "Opcije"
-
-#~ msgid "Profile "
-#~ msgstr "Profil "
-
-#~ msgid "Statistics"
-#~ msgstr "Statistike"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Brzina slanja podataka:"
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Brzina primanja podataka:"
-
-#~ msgid "Connection Time: "
-#~ msgstr "Vreme konekcije: "
-
-#~ msgid "Logs"
-#~ msgstr "Logovi"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Konektujem na Internet "
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Diskonektujem sa Interneta"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Diskonekcija sa Interneta neuspela."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Diskonekekcija sa Interneta zavr¹ena."
-
-#~ msgid "Connection complete."
-#~ msgstr "Konekcija zavr¹ena."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Konekcija neuspela.\n"
-#~ "Proverite svoju konfiguraciju u Mandrake Kontrolonom Centru."
-
-#~ msgid "Color configuration"
-#~ msgstr "Konfiguracija boje"
-
-#~ msgid "sent: "
-#~ msgstr "poslato:"
-
-#~ msgid "received: "
-#~ msgstr "primljeno: "
-
-#~ msgid "average"
-#~ msgstr "proseèno"
-
-#~ msgid "Connect"
-#~ msgstr "Konektuj"
-
-#~ msgid "Disconnect"
-#~ msgstr "Diskonektuj"
-
-#~ msgid "/File/_New"
-#~ msgstr "/_Datoteka/_Nova"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>N"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/Datoteka/_Otvori"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>O"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/Datoteka/_Saèuvaj"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/Datoteka/Saèuvaj_Kao"
-
-#~ msgid "/File/-"
-#~ msgstr "/Datoteka/-"
-
-#~ msgid "/_Options"
-#~ msgstr "/_Opcije"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/Opcije/Test"
-
-#~ msgid "/_Help"
-#~ msgstr "_Pomoæ"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/Pomoæ/_O..."
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Podrazumevani Runlevel"
-
-#~ msgid "Europe"
-#~ msgstr "Evropa"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "Ukloni queue"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Konfiguracioni fajl nije moguæe interpretirati"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Nepoznata konfiguraciona datoteka"
-
-#~ msgid "Adapter"
-#~ msgstr "Adapter"
-
-#~ msgid "Disable network"
-#~ msgstr "iskljuèi  mre¾u"
-
-#~ msgid "Enable network"
-#~ msgstr "Ukljuèi mre¾u"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Sada mo¾ete da testirate mi¹a. Pritiskajte tastere i pokrenite toèkiæ da "
-#~ "bi potvrdili\n"
-#~ "da li su postavke dobre. Ukoliko nisu, kliknite na \"Poni¹ti\" da bi "
-#~ "izabrali drugi\n"
-#~ "drajver."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (ili ADSL) konekcija"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Zatvori"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Mo¾ete da odredite URI direktno radi pristupa ¹tampaèu sa CUPS-a"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Da, i¹tampaj ASCII test stranicu"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Da, i¹tampaj PostScript test stranicu"
-
-#~ msgid "Yes, print both test pages"
-#~ msgstr "Da, i¹tampaj obe test stranice"
-
-#~ msgid "Paper Size"
-#~ msgstr "Velièina papira"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Izbaci papir nakon ¹tampanja ?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint  drajver -opcije"
-
-#~ msgid "Color depth options"
-#~ msgstr "Opcija - Broj boja"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "¹tampaj tekst kao PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Popraviti  'efekat stepenica' u tekstu?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Broj stranica po izlaznim stranicama"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Desna/leva margina u taèkama (1/72 deo inèa)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Vrh/dno margina u taèkama (1/72 deo inèa)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Dodatne GhostScript opcije"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Dodatne Tekst opcije"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Obrnut redosled stranica"
-
-#~ msgid "CUPS starting"
-#~ msgstr "Pokreæem CUPS.."
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Izaberi  konekciju udaljenih ¹tampaèa"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected.\n"
-#~ "In case of doubt, select \"Remote CUPS server\"."
-#~ msgstr ""
-#~ "Sa udaljenim CUPS serverom, ne morate da kofiguri¹ete\n"
-#~ "ovde ni jedan ¹tampaè; ¹tampaèi æe biti automatski detektovani.\n"
-#~ "In Ukoliko se dvoumite, izaberite \"Udaljeni CUPS server\"."
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Svaki  ¹tampaè mora da ima ime (npr. lp).\n"
-#~ "Ostali parametri kao ¹to je opis ili njegova lokacija \n"
-#~ "mogu biti definisani.Koje ime treba da bude iskori¹teno za  ovaj ¹tampaè "
-#~ "i\n"
-#~ "kako je ¹tampaè povezan?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Svaki 'red' za ¹tampu (u koji se sla¾u poslovi za ¹tampanje) zahteva\n"
-#~ "ime (obièno lp) i 'spool' direktorijum koji uz to ide. Koje ime i "
-#~ "direktorijum\n"
-#~ "da koristim za ovaj red za ¹tampu i kako je  ¹tampaè povezan?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Ime queue-a "
-
-#~ msgid "Spool directory"
-#~ msgstr "'Spool direktorijum"
-
-#~ msgid "Disable"
-#~ msgstr "Onemoguæi"
-
-#~ msgid "Enable"
-#~ msgstr "Omoguæi"
-
-#, fuzzy
-#~ msgid "fsck failed: "
-#~ msgstr "montiranje nije uspelo"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Da bi omoguæili veæu sigurnost sistema, izaberite \"Koristi shadow fajl\" "
-#~ "i\n"
-#~ "\"Use MD5 passwords\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Ukoliko va¹ raèunar koristi NIS, izaberite \"Koristi NIS\". Ukoliko "
-#~ "niste\n"
-#~ "sigurni kontaktirajte va¹eg administratora."
-
-#~ msgid "yellow pages"
-#~ msgstr "¾ute stranice"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "LAN konfiguracija"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Provajderov dns 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Provajderov dns 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Kako ¾elite da se konektujete na internet ?"
-
-#~ msgid "cannot fork: "
-#~ msgstr "Ne mogu da fork-ujem:"
-
-#~ msgid "Configure..."
-#~ msgstr "Konfiguracija..."
-
-#, fuzzy
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "LAN konfiguracija"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Izaberite velièinu %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Otvaram konekciju..."
-
-#~ msgid "Standard tools"
-#~ msgstr "Standardni alati"
-
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Konfiguracija za Lilo/Grub"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Ova startup skripta poku¹ava uèitati module za usb mi¹a"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Konfiguracija stila startera"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Sada kada ste konfigurisali va¹u Internet konekciju,\n"
-#~ "va¹ kompjuter mo¾ete podesiti za deljenje njegove Internet konekcije.\n"
-#~ "Napomena: potrebana vam je mre¾na kartica da bi podesili lokalnu mre¾u"
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Da li ¾elite da podesite deljenje Internet konekcije ?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Automatske zavisnosti"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Konfigurisanje  LILO/GRUB startera"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Napravi startnu disketu"
-
-#~ msgid "Format floppy"
-#~ msgstr "Formatiraj disketu"
-
-#~ msgid "Choice"
-#~ msgstr "Izbor"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "horizontalna aurora"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "vertikalna tradicionalna aurora"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Ovde mo¾ete podesiti neke korisne opcije za va¹ sistem.\n"
-#~ "\n"
-#~ "* Upotrebi hard disk optimizaciju: Ova opcija ubrzava hard disk,ali je "
-#~ "samo za naprednije korisnike : zbog moguænosti o¹teæenja\n"
-#~ "harda usled bagovitih chipset-ova.Dakle,\n"
-#~ "    pazite. Zapamtite da kernel ima crnu listu drajvera i \n"
-#~ "    chipset-ova, ali ukoliko ne volite iznenaðenja, ostavite ovu opciju  "
-#~ "nepode¹enu.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Biranje sigurnosnog nivoa: Mo¾ete birati nivo sigurnosti za va¹\n"
-#~ "sistem. Proèitajte upustvo za vi¹e informacija.U osnovi: \n"
-#~ "ukoliko ne znate, izaberite defaultopciju\n"
-#~ "\n"
-#~ "\n"
-#~ "* Defini¹i velièinu RAM-a (ako je potrebno): U nekim sluèajevima,\n"
-#~ "Linux ne mo¾e da taèno odredi sav instalirani RAM na nekim ma¹inama."
-#~ "Ukoliko se ovo desi, specificirajte taènu vrednost.\n"
-#~ "Napomena: razlika u 2 ili 4 Mb je normalna.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Automontiranje prenosivih medija: Ukoliko ne volite ruèno montiranje\n"
-#~ "prenosivih medija (CD-ROM, disketa, Zip) kucanjem \"mount\" i \"umount\"\n"
-#~ "izaberite ovu opciju.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Oèisti \"/tmp\" pri svakom startanju sistema: ukoliko ¾elite da "
-#~ "izbri¹te sve datoteke i direktorijumekoji se nalaze u  \"/tmp\" kada "
-#~ "di¾ete sistem,\n"
-#~ "  izaberite ovu opciju.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Omoguæi Num Lock taster pri startanju: Ako ¾elite da Num Lock bude\n"
-#~ "aktiviran pri boot-anju, izaberite ovu opciju (Napomena: Num Lock mo¾da "
-#~ "opet neæe raditi pod X-ima, ti malera !)."
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "Na ¾alost, glavna konfiguracija jo¹ nije implementirana. Budite strpljivi."
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "Dobrodo¹li u èarobnjak za konfigurisanje mre¾e.\n"
-#~ "Koju komponentu ¾elite da podesite?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Internet/mre¾ni pristup"
-
-#~ msgid "Mail information"
-#~ msgstr "Informacije o el.po¹ti"
-
-#~ msgid "No I don't need DHCP"
-#~ msgstr "Ne, meni netreba DHCP"
-
-#~ msgid "No I don't need NTP"
-#~ msgstr "Ne, meni netreba NTP"
-
-#~ msgid "No (firewall this off from the internet)"
-#~ msgstr "Ne (ukolinte firewall sa ovoga)"
-
-#~ msgid "Yes (allow this through the firewall)"
-#~ msgstr "Da (postavite ovo kroz firewall)"
-
-#~ msgid "Firewall Configuration Wizard"
-#~ msgstr "èarobnjak za pode¹avanje Firewall-a"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Razne opcije"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Razna pitanja"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Nije moguæe korisititi supermount kod  'Velkog' sigurnosnog nivoa"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Upozorenje: U OVOM NIVOU SIGURNOSTI, logovanje kao ROOT  u konzoli  NIJE "
-#~ "dozvoljeno!\n"
-#~ "Ukoliko  ¾elite da budete root, morate se ulogovati kao korisnik a onda "
-#~ "da ukucate \"su\".\n"
-#~ "Ili jednostavnije, neoèekujte da koristite ma¹inu za ne¹to drugo osim "
-#~ "kaoserver.\n"
-#~ "Upozoreni ste."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Budite pa¾ljivi, ukoliko ukljuèite numlock to  mo¾e dovesti do toga da "
-#~ "mnoga\n"
-#~ "tasteri daju brojeve umesto slova (npr: pritiskom na `p' dobijamo `6')"
-
-#~ msgid "not connected"
-#~ msgstr "nije konektovan"
-
-#~ msgid "Actions"
-#~ msgstr "Akcije"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Nauène aplikacije"
-
-#~ msgid "toot"
-#~ msgstr "toot"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Server, Datoteka/¹tampa/Samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Server, DNS/DHC "
-
-#~ msgid "First DNS Server"
-#~ msgstr "Prvi DNS Server"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Drugi DNS Server"
-
-#~ msgid "using module"
-#~ msgstr "sa upotrebom modula"
-
-#~ msgid "Development, Database"
-#~ msgstr "Razvoj, Baza podataka"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Razvojno, integrisano okru¾enje"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Razvojna, standardni alati"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "Upozorenje:\n"
-#~ "Prihvatajuæu promene dok je aktivano mo¾e dovesti do ru¹enja X okru¾enja."
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "Ukoliko nastavite, ja æu izaæi iz %s okru¾enja"
-
-#~ msgid "eth$_"
-#~ msgstr "eth$_"
-
-#~ msgid "loopback"
-#~ msgstr "povratno"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Koji starter ¾elite da koristite ?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Auto instalaciona disketa "
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Da potra¾im modem ?"
-
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "Podesi ISDN konekciju"
-
-#~ msgid "Configure a cable connection"
-#~ msgstr "Podesi kablovsku konekciju"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Onemoguæu internet Konekciju"
-
-#~ msgid "Configure local network"
-#~ msgstr "Podesi lokalni mre¾u"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Podesi Internet konekciju / podesi lokalni mre¾u"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Lokalni mre¾a je veæ pode¹ena.\n"
-#~ "Da li ¾elite da:"
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Rekonfiguracija kori¹æenjem èarobnjaka..."
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Manipulacija sa grafikom"
-
-#~ msgid "Multimedia"
-#~ msgstr "Multimedija"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Chat (IRC ili  instant messaging) programi kao ¹to su  xchat, licq, gaim, "
-#~ "i alati za transfer datoteka"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Komunikacione opcije"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Internet Alati"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Klijetni i serveri za baze podataka (mysql and postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Razvojna C/C++"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Podesi vremensku zonu"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Mre¾ni adapter 1 (eth0):"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(mo¾e uzrokovati gre¹ke)"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "Aktiviraj hard disk optimizaciju ?"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Aktiviraj Num Lock taster pri startanju"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Potvrdi lozinku"
-
-#~ msgid "default"
-#~ msgstr "Po default-y"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Za ¹ta æe te korisiti sistem ?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Izaberite velièinu  instalacije"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Koristi diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "Izbor po ¾elji"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Da li ste sigurno ekspert !? \n"
-#~ "Xej,bez ¹ale,jer dobijate pristup moænim ali opasnim stvarima.\n"
-#~ "Odgovaraæete na pitanja kao ¹to je: ``Da li ¾elite shadow fajl za "
-#~ "lozinke ?'',\n"
-#~ "da li ste spremni na odgovorite na ovakva pitanja ?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Koristi shadow fajl"
-
-#~ msgid "shadow"
-#~ msgstr "senka"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Koristi  MD5 lozinku"
-
-#~ msgid "Search"
-#~ msgstr "Tra¾i"
-
-#~ msgid "Package"
-#~ msgstr "Paket"
-
-#~ msgid "Text"
-#~ msgstr "Tekst"
-
-#~ msgid "Tree"
-#~ msgstr "Grana"
-
-#~ msgid "Sort by"
-#~ msgstr "Sortiraj po"
-
-#~ msgid "Category"
-#~ msgstr "Kategoriji"
-
-#~ msgid "See"
-#~ msgstr "Pogledaj"
-
-#~ msgid "Installed packages"
-#~ msgstr "Instalirani paketi"
-
-#~ msgid "Available packages"
-#~ msgstr "Dostupni paketi"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Prika¾i samo ostavljene"
-
-#~ msgid "Expand all"
-#~ msgstr "Pro¹iri sve"
-
-#~ msgid "Collapse all"
-#~ msgstr "Skupi sve"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Dodaj lokaciju paketa"
-
-#~ msgid "Update location"
-#~ msgstr "Osve¾i lokaciju"
-
-#~ msgid "Remove"
-#~ msgstr "Ukloni"
-
-#~ msgid "Find Package"
-#~ msgstr "Pronaði paket"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Pronaði paket koji sadr¾i fajl"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Biraj izmeðu Instalirano i Dostuno"
-
-#~ msgid "Choose package to install"
-#~ msgstr "Izaberi pakete za instalaciju"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Provera zavisnosti"
-
-#~ msgid "Wait"
-#~ msgstr "Momenat..."
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Sledeæi paketi æe biti instalirani"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "Deinstaliram RPM-ove"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Koji paket tra¾ite"
-
-#~ msgid "%s not found"
-#~ msgstr "%s nije pronaðen"
-
-#~ msgid "No match"
-#~ msgstr "Nema poklapanja"
-
-#~ msgid "No more match"
-#~ msgstr "Nema vi¹e poklapanja "
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake je trenutno u ``low memory'' modu.\n"
-#~ "Restartujem  rpmdrake da bi omoguæio tra¾enje datoteka"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Koju datoteku tra¾ite ?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "¹ta tra¾ite ?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Dajte ime (npr: `extra', `commercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Direktorijum"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "cdrom nije dostupan(nema ni¹ta u  /mnt/cdrom)  "
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL direktorijuma koji sadr¾i RPM-ove"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Za FTP i  HTTP  je potrebno da date lokaciju za hdlist\n"
-#~ "Ona mora biti relativna u odnosu na gore navedeni URL"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Molim uva¾ite sledeæu informaciju"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s je veæ u upotrebi"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Osve¾avanje RPM baze"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Uklanjam unos  %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Pronaði ostavljene"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Pronaði ostavljenih tra¾i malo vremena"
-
-#~ msgid "Czech"
-#~ msgstr "Èe¹ki"
-
-#~ msgid ""
-#~ "The system is now connected to Internet! Congratulation.\n"
-#~ "Feel free to launch draknet at any time to setup your connection.\n"
-#~ msgstr ""
-#~ "Sistem je sada konektovan na Internet ! èestitamo.\n"
-#~ "Mo¾ete slobodno pokrenuti draknet bilo kada i podesiti konekciju.\n"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Pronaðena ISDN kartica:\n"
-
-#~ msgid "France"
-#~ msgstr "Francuska"
-
-#~ msgid "Other countries"
-#~ msgstr "Druge zemlje"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "U kojoj se zamlji nalazite ?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Alcatel modem"
-
-#~ msgid "ECI modem"
-#~ msgstr "ECI modem"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "Ako je va¹ adsl modem Alcatel -ov,izaberite Alcatel.Ukoliko nije,ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "ne koristi pppoe"
-
-#~ msgid "mandatory"
-#~ msgstr "obavezno"
-
-#~ msgid "interesting"
-#~ msgstr "interesantno"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (va¾no)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n(veoma lepo)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n(lepo)"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "Ne mogu instalirati ipchains RPM sa urpmi."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "Ne mogu instalirati dhcp RPM sa urpmi."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "Ne mogu instalirati linuxconf RPM sa urpmi"
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "Ne mogu instalirati bind RPM sa urpmi"
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "Ne mogu instalirati caching-nameserver RPM sa urpmi"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Na koji serijski port je va¹ mi¹ prikljuèen?"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Rekonfiguri¹i lokalnu mre¾u"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Va¹ raèunar mo¾e biti pode¹en za deljenje internet konekcije.\n"
-#~ "\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "Sve je konfigurisano.\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Konektuj na Internet sa obiènim modemom"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Konektuj na Internet sa ISDN karticom"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Konektuj na Internet koristeæi DSL (ili  ADSL)"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Konektuj na Internet koristeæi Kabl"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "Vreme (u sekundama) inaktivnosti nakon kojeg\n"
-#~ "se veza prekida. (ostaviti prazno ukoliko ga ¾elite iskljuèenog)"
-
-#~ msgid "Germany"
-#~ msgstr "Nemaèka"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Nemaèka (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "©ta ¾elite da uradite?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Instaliraj/Saèuvaj"
-
-#~ msgid "Rescue"
-#~ msgstr "Saèuvaj"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Koji tip particije ¾elite?"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Izaberite \"Instalacija\" ako nemate veæ instaliran Linux, ili ¾elite\n"
-#~ "da koristite vi¹e distribucija ili verzija.\n"
-#~ "\n"
-#~ "Izaberite \"Spasavanje\" ako ¾elite da saèuvate prethodnu \n"
-#~ "verziju Mandrake-a Linux-a:\n"
-#~ "\n"
-#~ "\n"
-#~ "Izaberite:\n"
-#~ "\n"
-#~ " - Automatski(preporuèeno) : Ukoliko niste do sada instalirali Linux.\n"
-#~ "izaberite ovo.NAPOMENA:\n"
-#~ "  mre¾ne opcije neæe biti pode¹ene tokom instalacije,upotrebite\"LinuxConf"
-#~ "\"\n"
-#~ "  da bi konfigurisali mre¾ne opcije nakon instalacije.\n"
-#~ "\n"
-#~ " - Sa pode¹avanjima (Customized): Ukoliko ste upoznati sa Linux-om moæi "
-#~ "æete\n"
-#~ "da izaberete mod instalacije.\n"
-#~ "   koji je zavisi od va¹ih potreba nakon instalacije.Pogledajte ni¾e za "
-#~ "vi¹e podataka.\n"
-#~ "\n"
-#~ " - Ekspert: Ukoliko ste dobro poznajte GNU/Linux i ¾elite izuzetno\n"
-#~ "podesivu instalaciju onda je ovo pravi mod za vas. Moæi æete izabrati\n"
-#~ "kori¹æenje sistema kao \"Preporuèeno\".\n"
-#~ "    Ali molim Vas, NEMOJTE BIRATI OVU OPCIJU UKOLIKO NE ZNATE ¹ta "
-#~ "RADITE !\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "Sada, mo¾ete izabrati na koju particiju(e) ¾elite instalirati\n"
-#~ "va¹ Mandrake Linux sistem ukoliko je(su) ona unapred odreðena(e)\n"
-#~ "(postojeæom Linux instalacijom ili nekim programom za particiranje "
-#~ "diska).\n"
-#~ "U drugim sluèajevima particije na hard disku moraju biti definisane.\n"
-#~ "Ova operacija se sastoji od logièkog deljenja hard diska na nekoliko "
-#~ "delova.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko morate da kreirate nove particije, koristite \"Auto dislociranje"
-#~ "\"za automatsko kreiranje\n"
-#~ "particija za Linux. Mo¾ete izabrati diskza particiranje\n"
-#~ "klikom na \"hda\" za prvi IDE disk, \"hdb\" za drugi ili\n"
-#~ "\"sda\" za prvi SCSI disk i tako dalje.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dve glave particije su: root particija (/), koja je polazna taèka\n"
-#~ "(direktorijum)\n"
-#~ "hijerarhije fajl-sistema, i (/boot), koji sadr¾i sve fajlove potrebne\n"
-#~ "za podizanje operativnog sistema po ukljuèenju raèunara\n"
-#~ "\n"
-#~ "\n"
-#~ "Po¹to je proces particiranja diska obièno nepovratan, obièno je\n"
-#~ "frustrirajuæi i zastra¹ujuæi za poèetnike. DiskDrake pojednostavljuje\n"
-#~ "proces da se to ne bi de¹avalo. Proèitajte dokumentaciju i ne ¾urite.\n"
-#~ "\n"
-#~ "\n"
-#~ "Mo¾ete pristupiti bilo kojoj opciji pomoæu tastature : kreæite se kroz "
-#~ "particije \n"
-#~ "koristeæi  Tab i Up/Down tastere. Kada je particija izabrana,mo¾ete "
-#~ "koristiti: \n"
-#~ "\n"
-#~ "- Ctrl-c  za kreiranje nove particije (kada je izabrana prazna "
-#~ "particija)\n"
-#~ "\n"
-#~ "- Ctrl-d  za brisanje  particije\n"
-#~ "\n"
-#~ "- Ctrl-m  za pode¹avanje taèke montiranja \n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Sve novoformirane particije moraju biti formatirane za upotrebu\n"
-#~ "(formatiranje-kreiranje fajl-sistema). Ako ¾elite, mo¾ete reformatirati\n"
-#~ "veæ postojeæe particije da bi izbrisali podatke koje sadr¾e.\n"
-#~ "Napomena: nije neophodno ponovno formatiranje postojeæih particija\n"
-#~ "ukoliko ¾elite da saèuvate podatke na njima. Oni se obièno nalaze\n"
-#~ "u /home i /usr/local direktorijumima."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Izabrani paketi se instaliraju. Ova operacija bi trebala potrajti\n"
-#~ "nekoliko minuta ukoliko niste izabrali a¾uriranje\n"
-#~ "na postojeæi sistem.U tom sluèaju potrebno je nesto vi¹e vremena."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Ukoliko DrakX nije uspeo da naðe va¹eg mi¹a, ili ¾elite da proverite\n"
-#~ "¹ta je uraðeno, pogledajte na gore gde se nalazi lista\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko vam postavka odgovara, samo preðite na deo koji ¾elite\n"
-#~ "klikom na meni na levoj strani. Ukoliko ne, izaberite tip mi¹a u meniju\n"
-#~ "za koji mislite da najvi¹e odgovara va¹em mi¹u.\n"
-#~ "\n"
-#~ "\n"
-#~ "U sluèaju da imate serijski mi¹, moraæete oznaèiti u DrakX-u na koji\n"
-#~ "serijski port je prikljuèen."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Ovaj deo je posveæen konfigurisanju lokalne mre¾e (LAN) ili modema.\n"
-#~ "\n"
-#~ "Izaberite \"Lokalni mre¾e\" i DrakX æe potra¾iti Intranet adapter\n"
-#~ "na va¹oj ma¹ini. PCI adapteri bi trebalo da se pronaðu i iniciraju\n"
-#~ "automatski. Meðutim, ukoliko su ISA, autodetekcija neæe raditi, veæ "
-#~ "treba\n"
-#~ "da izaberete drajver sa liste koja æe se pojaviti.\n"
-#~ "\n"
-#~ "\n"
-#~ "Za SCSI adaptere mo¾ete pustiti da drajver pretra¾i adapter, ili\n"
-#~ "da unesete specifikacije u drajver naðene u dokumentaciji va¹eg\n"
-#~ "hardvera.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko instalirate Mandrake Linux sistem na ma¹inu koja je deo "
-#~ "postojeæe\n"
-#~ "mre¾e, mre¾ni administrator æe vam dati sve potrebne informacije\n"
-#~ "(IP adresu, ime ma¹ine i dr.) Ukoliko pode¹avate privatnu mre¾u\n"
-#~ "u kuæi, sami birate adrese.\n"
-#~ "\n"
-#~ "\n"
-#~ "Izaberite \"Biranje sa modemom\" i Internet konekcija sa modemom æe biti\n"
-#~ "konfigurisana. DrakX æe tra¾iti modem, ukoliko ga ne pronaðe, morate\n"
-#~ "oznaèiti serijski port na koji je povezan modem."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "Linux prepoznaje mnogo tipova ¹tampaèa. Svaki od njih zahteva\n"
-#~ "drugaèiju konfiguraciju.\n"
-#~ "Zapamtite da spooler koristi 'lp' kao default ime ¹tampaèa,tako da\n"
-#~ "morate imati bar 1 ¹tampaè sa tim imenom ali mu mo¾ete dati vi¹e\n"
-#~ "imena odvojenih sa znakom '|',npr.: Epson Stylus 600|lp.\n"
-#~ " ¹tampaè koji ima  \"lp\" u svom imenu(ima) je i  default ¹tampaè.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko je va¹ ¹tampaè direktno spojen sa raèunarom, izaberite\n"
-#~ "\"Lokalni ¹tampaè\". Moraæete naznaèiti na koji je port ¹tampaè spojen,\n"
-#~ "i izabrati odgovarajuæi filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko  ¾elite da pristupite ¹tampaèu lociranom na remote Unix ma¹ini,\n"
-#~ "morate izabrati  \"Remote lpd\".Da bi to funkcionisalo nije potrebno\n"
-#~ "korisnièko ime \n"
-#~ "i lozinka ,ali vam je potrebno da znate ime  printing queue-a na "
-#~ "serveru.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko ¾elite da pristupite mre¾nom (SMB na Win 9x/NT ma¹inama) "
-#~ "¹tampaèu\n"
-#~ "treba da odredite njegovo SMB ime (koje nije i njegovo TCP/IP ime), i \n"
-#~ "verovatno\n"
-#~ "njegovu IP adresu, kao i korisnièko ime, radnu grupu i lozinku "
-#~ "(password)\n"
-#~ "¹to\n"
-#~ "je sve potrebno da bi pristupili ¹tampaèu, i naravno ime ¹tampaèa. Isti\n"
-#~ "postupak se poduzima i za NetWare ¹tampaèe, izuzev imena radne grupe."
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "Preporuèujemo da ovde odgovorite \"Da\". Ukoliko instalirate MS Windows\n"
-#~ "sa kasnijim datumom on æe sam upisati novi boot sektor.\n"
-#~ "Ukoliko niste napravili startnu disketu, neæete vi¹e moæi podiæi Linux."
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Pomerite va¹ toèkiæ"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Ne pamtiti promene?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Koji tip mi¹a imate?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Automatsko pode¹avanje rezolucije"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Da bi prona¹li odgovarajuæu rezoluciju poku¹aæemo sa drugim.\n"
-#~ "Va¹ ekran æe blinkati...\n"
-#~ "Mo¾ete ugasiti monitor ako ¾elite, kraj æe biti oznaèen zvuènim signalom"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Mogu poku¹ati da pronaðem odgovarajuæu rezoluciju (npr: 800x600).\n"
-#~ "Ipak, to mo¾e dovesti do blokiranja raèunara.\n"
-#~ "Da li ¾elite poku¹ati?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Nije pronaðen odgovarajuæi mod\n"
-#~ "Poku¹ajte sa drugom grafièkom karticom ili monitorom"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Automatsko tra¾enje rezolucije"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-klijent"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB Mi¹ "
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB Mi¹ (2 tastera)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB Mi¹ (3+ tastera)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple ADB Mi¹"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB Mi¹ (2tastera)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB Mi¹ (3+ tastera)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Bus Mi¹"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft  Bus Mi¹"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech Bus Mi¹"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB Mi¹ (3 tastera ili vi¹e)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A ili noviji (serijski)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (serijski)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (serijski)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (serijski)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Generièki mi¹ (serijski)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft kompatibilan (serijski)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Generièki 3 tastera mi¹ (serijski)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (serijski)"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr ""
-#~ "Potrebno je konfigurisanje mre¾nog adaptera da bi se mogli konektovati na "
-#~ "internet."
-
-#~ msgid ""
-#~ "Please choose which network adapter do you want to use to connect to "
-#~ "internet.\n"
-#~ "If you don't know, choose eth0.\n"
-#~ msgstr ""
-#~ "Izaberite koji mre¾ni adapter ¾elite da koristite za konekcijuna "
-#~ "internett.\n"
-#~ "Ukoliko ne znate, izaberite eth0.\n"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "nfs montiranje nije uspelo"
-
-#~ msgid "Socket"
-#~ msgstr "Prikljuèak"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX æe generisati konfiguracione fajlove  za XFree 3.3 kao i za XFree "
-#~ "4.0.\n"
-#~ "Po default-u , 4.0 server se koristi osim ako va¹a kartica nije "
-#~ "podr¾ana.\n"
-#~ "\n"
-#~ "Da li ¾elite da zadr¾ite  XFree 3.3?"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Kriptografski"
-
-#~ msgid "Configure LAN"
-#~ msgstr "Konfigurisanje LAN mre¾e"
-
-#~ msgid "End configuration"
-#~ msgstr "Kraj konfiguracije"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "Nemoj pode¹avati mre¾u"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Da li ¾elite da podesite lokalnu mre¾u za va¹ sistem?"
-
-#~ msgid "Show less"
-#~ msgstr "Prika¾i manje"
-
-#~ msgid "Show more"
-#~ msgstr "Prika¾i vi¹e"
-
-#~ msgid "URI for Local printer"
-#~ msgstr "URI ili lokalni  ¹tampaè"
-
-#~ msgid "Local Printer Device (URI)"
-#~ msgstr "Lokalni ureðaj za ¹tampaè (URI)"
-
-#~ msgid ""
-#~ "What URI device is your printer connected to\n"
-#~ "(note that parallel:/dev/lp0 is equivalent to LPT1:)?"
-#~ msgstr ""
-#~ "Na koji URI ureðaj je va¹ ¹tampaè povezan \n"
-#~ "(paralelni /dev/lp0 odgovara LPT1:)?\n"
-
-#~ msgid "tie"
-#~ msgstr "kravata"
-
-#~ msgid "brunette"
-#~ msgstr "crnka"
-
-#~ msgid "girl"
-#~ msgstr "devojka"
-
-#~ msgid "woman-blond"
-#~ msgstr "plavu¹a"
-
-#~ msgid "automagic"
-#~ msgstr "Automagija"
-
-#~ msgid "Network:"
-#~ msgstr "Mre¾a:"
-
-#~ msgid "Everything configured!"
-#~ msgstr "Sve je konfigurisano !"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Koju vrstu tastature imate?"
-
-#~ msgid "pptp alcatel"
-#~ msgstr "pptp alcatel"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Da li da tra¾im PCMCIA kartice ?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Da li da tra¾im %s ureðaje ?"
-
-#~ msgid "Small(%dMB)"
-#~ msgstr "Malo (%dMB)"
-
-#~ msgid "Modem Configuration"
-#~ msgstr "Konfiguracija modema"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "Da li ¾elite da podesite  dialup konekciju za modem za va¹ sistem?"
-
-#~ msgid "Do you want to configure a ISDN connection for your system?"
-#~ msgstr "Da li ¾elite da podesite ISDN konekciju  za va¹ sistem?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Da li da tra¾im PCI ureðaje ?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "Tra¾im root particiju."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: Ovo nije root particija, izaberite neku drugu."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "Izaberite koju particiju ¾elite da korisite kao root particiju"
-
-#~ msgid "Autologin at startup"
-#~ msgstr "Auto logovanje pri startanju sistema"
-
-#~ msgid "Autologin - Choose default user"
-#~ msgstr "Auto logovanje - izaberite default (osnovnog) korisnika"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "Nemate nijednu Windows particiju!"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Nemate mesta na particiji za Lnx4win!"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# When possible cp437 accentuated letters can be used too.
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Dobrodosli u LILO starter operativnih sistema !\n"
-#~ "\n"
-#~ "Za prikaz mogucih opcija, pritisnite <TAB>.\n"
-#~ "\n"
-#~ "Za startanje jedne od njih, upisite njeno ime i pritisnite <ENTER>\n"
-#~ "ili sacekate %d sekundi za startanje pretpostavljenog OS-a.\n"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# When possible cp437 accentuated letters can be used too.
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Dobrodosli u SILO, menadzer za startanje operativnih sistema !\n"
-#~ "\n"
-#~ "Za prikaz mogucih opcija, pritisnite <TAB>.\n"
-#~ "\n"
-#~ "Za startanje jedne od njih, upisite njeno ime i pritisnite <ENTER>\n"
-#~ "ili sacekate %d sekundi za startanje pretpostavljenog OS.\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "SILO glavne opcije"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Ovo su postavljne opcije u SILO-u.\n"
-#~ "Mo¾ete dodati nove ili izmeniti stare."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Ova oznaka je veæ u upotrebi"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "Instalacija SILO-a neuspela. Gre¹ka je:"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX æe prvo potra¾iti jedan ili vi¹e PCI\n"
-#~ "SCSI adapter(a). Ukoliko ga(ih) pronaðe i ima drajver(e)\n"
-#~ "za njih, automatski æe ih instalirati.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko je va¹ SCSI adapter ISA, ili je PCI ali DrakX nije mogao\n"
-#~ "odrediti odgovarajuæi drajver, ili ukoliko uop¹te nemate SCSI,\n"
-#~ "biæete upitani da li ih imate. Ukoliko ih nemate, odgovorite sa \"Ne\".\n"
-#~ "Ukoliko ih imate jedan ili vi¹e, odgovorite sa \"Da\". Dobiæete popis\n"
-#~ "drajvera, iz kojeg æete izabrati jedan.\n"
-#~ "\n"
-#~ "\n"
-#~ "Nakon ¹to izaberete drajver, DrakX æe vas pitati da li ¾elite\n"
-#~ "specificirate opcije za njega. Prvo, dozvolite da drajver ispita\n"
-#~ "hardver: to obièno uspe.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko to nije sluèaj, pregledajte dokumentaciju ili podatke preuzmite\n"
-#~ "iz Windows-a ako ga imate na raèunaru, pa nadalje sa tim podacima\n"
-#~ "prosledite drajveru."
-
-#~ msgid "Shutting down"
-#~ msgstr "Gasim ma¹inu"
-
-#~ msgid "useless"
-#~ msgstr "beskorisno"
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "Da li ¾elite da koristite LILO ?"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "Mo¾ete izabrati pakete koje ¾elite instalirati.\n"
-#~ "\n"
-#~ "\n"
-#~ "Prvo mo¾ete birati da li ¾elite punu instalaciju ili preinstalaciju\n"
-#~ "na postojeæu. Nakon toga birate pakete uzimajuæi u obzir ukupnu velièinu\n"
-#~ "odabranog.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ako se nalazite u ekspert modu, pakete birate pojedinaèno.\n"
-#~ "Uzmite u obzir da neki paketi zahtevaju instalaciju drugih,\n"
-#~ "pa æe i oni biti automatski instalirani."
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (Linux starter) mo¾e startati Linux kao i druge operativne sisteme.\n"
-#~ "Oni se obièno ispravno detektuju pri samoj instalaciji. Ukoliko ne,\n"
-#~ "mo¾ete ih sada dodati.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ukoliko NE ¾elite da svako mo¾e da im pristupi, mo¾ete ga ukloniti sada.\n"
-#~ "(Za podizanje sistema æe vam tada biti potrebna startna disketa)."
-
-#~ msgid ""
-#~ "Now that you've selected desired groups, please choose \n"
-#~ "how many packages you want, ranging from minimal to full \n"
-#~ "installation of each selected groups."
-#~ msgstr ""
-#~ "Sada kada ste izabrali grupe,izaberite \n"
-#~ "koliko paketa ¾elite,birajuæi od minimalne do maksimalne\n"
-#~ "instalacije svake odabrane grupe."
-
-#~ msgid ""
-#~ "You need %dMB for a full install of the groups you selected.\n"
-#~ "You can go on anyway, but be warned that you won't get all packages"
-#~ msgstr ""
-#~ "Morate imati %dMB za punu instalaciju grupa koje ste izabrali.\n"
-#~ "Mo¾ete i  nastaviti,ali znajte da neæete imati sve¹to je izabrano."
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "Izaberi drugi CD za instalaciju"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Izaberite:\n"
-#~ "\n"
-#~ " - Preporuèeno: Ukoliko niste do sada instalirali Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Sa pode¹avanjima (Customized): Ukoliko ste upoznati sa Linux-om moæi "
-#~ "æete\n"
-#~ "da izaberete normal,development ili server mod instalacije.\n"
-#~ "Izaberite \"Normal\" instalaciju pri uobièajenom kori¹æenju raèunara\n"
-#~ "Mo¾ete izabrati \"Development\" instalaciju ukoliko æete se prvenstveno\n"
-#~ "razvojem softvera, ili \"Server\" ukoliko ¾elite da postavite standardnu\n"
-#~ "server ma¹inu (za mail, ¹tampanje...)\n"
-#~ "\n"
-#~ "\n"
-#~ " - Ekspert: Ukoliko ste dobro poznajte GNU/Linux i ¾elite izuzetno\n"
-#~ "podesivu instalaciju onda je ovo pravi mod za vas. Moæi æete izabrati\n"
-#~ "kori¹æenje sistema kao \"Preporuèeno\"."
-
-#~ msgid "Setup SCSI"
-#~ msgstr "Podesi SCSI"
-
-#~ msgid "Installation CD Nr %s"
-#~ msgstr "Instalacija CD Br.%s"
-
-#~ msgid ""
-#~ "Update installation image!\n"
-#~ "\n"
-#~ "Ask your system administrator or reboot to update your installation image "
-#~ "to include\n"
-#~ "the Cd-Rom image labelled \"%s\". Press Ok if image has been updated or "
-#~ "press Cancel\n"
-#~ "to avoid installation from this Cd-Rom image."
-#~ msgstr ""
-#~ "Napravite update instalacionog image-a!\n"
-#~ "Pitajte sistem administratora ili rebutujte radi  update instalacionog  "
-#~ "image-aradi  Cd-Rom image-a oznaèenog sa  \"%s\".Pritisnite Ok ukoliko je "
-#~ "image update-ovan ili pritisnite  Cancel\n"
-#~ "za prekid instalacije Cd-Rom image-a."
-
-#~ msgid "Which language do you want?"
-#~ msgstr "Koji jezik ¾elite ?"
-
-#~ msgid "Hurt me plenty"
-#~ msgstr "Razbij me"
-
-#~ msgid "Which packages do you want to install"
-#~ msgstr "Izaberi pakete za instalaciju"
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "Skidam kripto pakete"
-
-#~ msgid "Local LAN"
-#~ msgstr "Lokalna mre¾a LAN"
-
-#~ msgid "Installation CD Nr 1"
-#~ msgstr "Instalacioni  CD Br. 1"
-
-#~ msgid "expert"
-#~ msgstr "ekspert"
-
-#~ msgid "developer"
-#~ msgstr "developer"
-
-#~ msgid "beginner"
-#~ msgstr "poèetnik"
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "Koristi linearni mod (potreban nekim SCSI drajvovima)"
-
-#~ msgid "linear"
-#~ msgstr "linear"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Posle %s particija %s,"
-
-#~ msgid "changing type of"
-#~ msgstr "menjanje tipa"
-
-#~ msgid "formatting"
-#~ msgstr "formatiranje"
-
-#~ msgid "resizing"
-#~ msgstr "promena velièine"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Velièina: %s MB"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "Pogre¹an kickstart datoteka %s (nije uspeo %s)"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr "Instaliraæu %d MB. Mo¾ete izabrati da instalirate jo¹ programa"
-
-#~ msgid "Password:"
-#~ msgstr "Lozinka:"
-
-#~ msgid "User name:"
-#~ msgstr "Korisnièko ime:"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "Ubacite disketu u ureðaj za kreiranje  HTP boot diskete\n"
-#~ "(Svi podaci na disketi æe biti izbrisani !)"
-
-#~ msgid "A entry %s already exists"
-#~ msgstr "Unos %s veæ postoji"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "Instalacija ili a¾uriranje"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "Izaberite koÙe kori¹æenje ¾elite"
diff --git a/perl-install/share/po/sv.po b/perl-install/share/po/sv.po
deleted file mode 100644
index 9deb340be..000000000
--- a/perl-install/share/po/sv.po
+++ /dev/null
@@ -1,9254 +0,0 @@
-# Translatrion file of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# Andreas Berglund <andreas.berglund@home.se>, 1999
-# Robert Jungstedt <master@linux.nu>, 1999
-# David Hedbor <david@hedbor.org>, 2000
-# Egil Möller <redhog@mandrakesoft.com>, 2000
-# Mattias Dahlberg <voz@home.se>, 2001.
-# Mattias Newzella <newzella@linux.nu>, 2001.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-09-21 14:13GMT\n"
-"Last-Translator: Mattias Newzella <newzella@linux.nu>\n"
-"Language-Team: Swedish <sv@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Konfigurera alla huvuden individuellt"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Använd Xinerama"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigurera endast kort \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Konfigurera \"multi-head\""
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Ditt system stöder \"multi-head\"-konfiguration.\n"
-"Vad vill du göra?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Grafikkort"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Välj ett grafikkort"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Välj en X-server"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X-server"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Vilken XFree-konfiguration vill du använda?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ditt kort kan få hårdvarustöd för 3D-acceleration, men bara med XFree %s.\n"
-"Ditt kort stöds av XFree %s, som kan vara bättre för 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Ditt kort kan få hårdvarustöd för 3D-acceleration med XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s med hårdvarubaserad 3D-acceleration"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Ditt kort kan få hårdvarustöd för 3D-acceleration med XFree %s,\n"
-"OBSERVERA: DETTA ÄR EXPERIMENTELLT STÖD OCH KAN HÄNGA DIN DATOR."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s med EXPERIMENTELLT hårdvarustöd för 3D-acceleration."
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ditt kort kan få hårdvarustöd för 3D-acceleration, men bara med XFree %s,\n"
-"OBSERVERA: DETTA ÄR EXPERIMENTELLT STÖD OCH KAN HÄNGA DIN DATOR.\n"
-"Ditt kort stöds av XFree %s som kan vara bättre för 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (skärmdrivrutin installation)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree-konfiguration"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Välj minnesstorlek på ditt grafikkort"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Välj inställningar för server"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Välj en bildskärm"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Bildskärm"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"De två mest kritiska värdena är den vertikala uppdateringsfrekvensen,\n"
-"som är den hastighet som hela skärmen uppdateras i, och framförallt\n"
-"den horisontella synkroniseringshastigheten, som är den hastighet som\n"
-"scan-linjerna visas i.\n"
-"\n"
-"Det är VÄLDIGT VIKTIGT att du inte väljer värden för en skärmtyp som går\n"
-"utanför kapaciteten för din egen bildskärm; du kan då förstöra skärmen.\n"
-"Välj konservativa värden om du är osäker."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Horisontell uppdateringsfrekvens"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Vertikal uppdateringsfrekvens"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Bildskärm ej konfigurerad"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Grafikkortet är inte konfigurerat ännu"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Upplösningar ej valda ännu"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Vill du prova konfigurationen?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Varning: att prova detta grafikkort kan hänga din dator"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Test av konfigurationen"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"försök ändra några parametrar"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Ett fel uppstod:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Avslutar om %d sekunder"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Är detta korrekt inställning?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ett fel uppstod, försök att ändra några parametrar."
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Upplösning"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Välj upplösning och färgdjup"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafikkort: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86-server: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Expertläge"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Visa alla"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Upplösningar"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tangentbordslayout: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Mustyp: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Musenhet: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Bildskärm: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Bildskärm horisynk: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Bildskärm vertuppdatering: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafikkort: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafikkortsidentifiering: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafikminne: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Färgdjup: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Upplösning: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86-server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86-drivrutin: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Förbereder konfiguration av X-Windows"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Vad vill du göra?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Ändra bildskärm"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Ändra grafikkort"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Ändra serverinställningar"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Ändra upplösning"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Visa information"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Testa igen"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Avsluta"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Behålla ändringarna?\n"
-"Aktuell konfiguration är:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Logga in i %s igen för att aktivera ändringarna."
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Logga ut och använd sedan Ctrl-Alt-Backsteg"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X vid uppstart"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Din dator kan ställas in så att X startas automatiskt vid uppstart.\n"
-"Vill du att X ska starta när du startar om?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 färger (8 bitar)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tusen färger (15 bitar)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tusen färger (16 bitar)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljoner färger (24 bitar)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljarder färger (32 bitar)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB eller mer"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 i 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 i 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibel, 1024x768 i 87 Hz interlaced (ingen 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 i 87 Hz interlaced, 800x600 i 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 i 60 Hz, 640x480 i 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 i 60 Hz, 800x600 i 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 i 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency som klarar 1280x1024 i 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency som klarar 1280x1024 i 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency som klarar 1280x1024 i 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Bildskärm som klarar 1600x1200 i 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Bildskärm som klarar 1600x1200 i 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Första sektorn på startpartitionen"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Första sektorn på disken (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILO-installation"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Var vill du installera starthanteraren?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "Installation av LILO/Grub"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO med textbaserad meny"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO med grafikbaserad meny"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Starta från DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Starthanterarens huvudalternativ"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Starthanterare som ska användas"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Installation av starthanterare"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Startenhet"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (fungerar inte med gamla BIOS)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "kompakt"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Videoläge"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Fördröjning innan förvald avbild startar"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Lösenord"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Lösenord (bekräfta)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Begränsa alternativen för kommandoraden"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "begränsa"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Rensa /tmp vid varje uppstart"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ange RAM-storlek, om nödvändigt (hittade %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Aktivera användning av flera profiler"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Ange RAM-storlek i MB"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Alternativet \"Begränsa alternativen för kommandoraden\" är värdelöst utan "
-"lösenord."
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Försök igen"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Du angav inte samma lösenord"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Init Message"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Open Firmware-fördröjning"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Kernel Boot Timeout"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Aktivera CD-start?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Aktivera OF-start?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Standard-OS?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Följande poster finns.\n"
-"Du kan lägga till fler eller ändra på befintliga."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Lägg till"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Färdig"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Ändra"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Vilket sorts post vill du lägga till?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Annat OS (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Annat OS (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Annat OS (Windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Avbild"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Lägg till"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Läs-skriv"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tabell"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Osäker"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Etikett"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Standard"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-storlek"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Ta bort post"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Tom etikett tillåts inte"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Denna etikett används redan"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Hittade %s %s gränssnitt"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Har du ett till?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Har du något %s-gränssnitt?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Nej"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Visa hårdvaruinformation"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installerar drivrutin för %s kort %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Vilken %s drivrutin ska provas?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"I vissa fall behöver drivrutinen %s extra information för att fungera\n"
-"korrekt. Vanligtvis fungerar det ändå. Vill du specificera extra\n"
-"information eller låta drivrutinen leta efter informationen själv?\n"
-"Ibland kan sökningen låsa datorn, men det ska inte\n"
-"ställa till med någon skada."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Prova automatiskt"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Ange alternativ"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Du kan nu ange parametrar till modulen %s"
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Du kan nu ange parametrar till modulen %s.\n"
-"Parametrar i formatet \"name=value name2=value2...\".\n"
-"Till exempel, \"io=0x300 irq=7\""
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Modulalternativ:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Modulen %s kunde inte laddas.\n"
-"Vill du försöka igen med andra parametrar?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(finns redan %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Ditt lösenord är för enkelt"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Ange ett användarnamn"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Användarnamnet får endast innehålla små bokstäver, siffror,\"-\" och \"_\""
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Det här användarnamnet finns redan"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Lägg till användare"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Ange en användare\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Acceptera användare"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Fullständigt namn"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Användarnamn"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Skal"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Ikon"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Automatisk inloggning"
-
-#: ../../any.pm_.c:757
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Din dator kan konfigureras så att den automatiskt loggar in en användare.\n"
-"Vill du använda denna funktion?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Välj standardanvändare:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Välj fönsterhanteraren som ska användas:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Välj språket som ska användas."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Du kan välja ytterligare språk som ska finnas tillgängliga efter "
-"installationen."
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Alla"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Välkommen till operativsystemväljaren %s!\n"
-"\n"
-"Välj ett operativsystem i listan ovan eller\n"
-"vänta i %d sekunder för standardstart.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Välkommen till operativsystemväljaren GRUB!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Använd tangenterna %c och %c för att välja vad som ska markeras."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Tryck Enter för att starta valt operativsystem, \"e\" för att redigera."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "kommandon innan start, eller \"c\" för kommandorad."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Markerat alternativ kommer att starta automatiskt om %d sekunder."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "inte tillräckligt utrymme på /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Startmeny"
-
-#: ../../bootloader.pm_.c:972
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Du kan inte installera starthanteraren på en %s partition.\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ingen hjälp finns implementerad ännu.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfiguration av startutförande"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Arkiv"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Arkiv/_Avsluta"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Ny stil kategoriseringsmonitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Ny stil monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Traditionell monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Traditionell Gtk+-monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Kör Aurora vid uppstart"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Lilo/Grub-läge"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Du använder för närvarande %s som starthanterare.\n"
-"Klicka på \"Konfigurera\" för att starta inställningsguiden."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Konfigurera"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Startläge"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Systemläge"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Kör X-Window-systemet vid start"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Nej, jag vill inte ha automatisk inloggning"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"Ja, jag vill ha automatisk inloggning med denna (användare, skrivbordsmiljö)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Avbryt"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Kan inte öppna /etc/inittab för läsning: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Installationen av LILO misslyckades. Följande fel uppstod:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuter"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minut"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekunder"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Säkerhetskopiera din data först"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Läs noggrant!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Om du tänker använda aboot, se till att lämna ledigt utrymme (2048 sektorer "
-"räcker)\n"
-"i början av disken."
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Fel"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Guide"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Ny"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "Fjärr"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Monteringspunkt"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Alternativ"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Typ"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Avmontera"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Montera"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Välj åtgärd"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Du har en stor FAT-partition\n"
-"(normalt använt av Microsoft DOS/Windows).\n"
-"Du rekommenderas att ändra storleken på den partitionen.\n"
-"(Klicka på den och klicka sedan på \"Ändra storlek\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Klicka på en partition"
-
-#: ../../diskdrake.pm_.c:240
-msgid "Please click on a media"
-msgstr "Klicka på ett media"
-
-#: ../../diskdrake.pm_.c:243
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr ""
-"Klicka på en knapp ovan\n"
-"\n"
-"Eller använd \"Ny\"."
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr "Använd \"Ny\""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Detaljer"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Journalised FS"
-msgstr "Journalförande fs"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Växlingsutrymme"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Tom"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Annan"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Filsystemtyper:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Skapa"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Använd \"%s\" i stället"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Ta bort"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Använd \"Unmount\" först"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter ändring av partitionstyp %s kommer all data på denna partition att "
-"försvinna."
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Var vill du montera enheten %s?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "Monteringsalternativ"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "Diverse"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "Flyttningsbar media"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "Ändra typ"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Vilket filsystem vill du använda?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "Söker tillgängliga nfs-utdelade resurser"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "Söker tillgängliga nfs-utdelade resurser på server %s"
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr "Om listan ovan inte innehåller posten du vill ha, ange den här:"
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Server"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "Delad resurs"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "Söker tillgängliga Samba-utdelade resurser"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "Söker tillgängliga Samba-utdelade resurser på server %s"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "Välj en partition"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Välj en annan partition"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Avsluta"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Byt till expertläge"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Byt till normalläge"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Ångra"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Fortsätta ändå?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Avsluta utan att spara"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Avsluta utan att skriva partitionstabellen?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Vill du spara /etc/fstab-ändringar"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Allokera automatiskt"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Nollställ"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Mer"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "Information om hårddisk"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Inte tillräckligt med utrymme för automatisk allokering."
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Alla primära partitioner används"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Det går inte att lägga till fler partitioner"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"För att få fler partitioner, ta bort en för att sedan kunna skapa en utökad "
-"partition."
-
-#: ../../diskdrake_interactive.pm_.c:285
-msgid "Save partition table"
-msgstr "Spara partitionstabell"
-
-#: ../../diskdrake_interactive.pm_.c:286
-msgid "Restore partition table"
-msgstr "Återskapa partitionstabell"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Rädda partitionstabell"
-
-#: ../../diskdrake_interactive.pm_.c:289
-msgid "Reload partition table"
-msgstr "Ladda om partitionstabell"
-
-#: ../../diskdrake_interactive.pm_.c:293
-msgid "Removable media automounting"
-msgstr "Automatisk montering av flyttningsbar media"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Välj fil"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Den säkerhetskopierade partitionstabellen har inte samma storlek.\n"
-"Fortsätta ändå?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Varning"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Sätt in en diskett i diskettstationen.\n"
-"All data på denna diskett kommer att tas bort."
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Försöker återskapa partitionstabellen"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "Detaljerad information"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Ändra storlek"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Flytta"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Formatera"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Aktiv"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Addera till RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Addera till LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Ta bort från RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Ta bort från LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Ändra RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Använd till loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Skapa en ny partition"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Startsektor: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Storlek i MB: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Typ av filsystem: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Monteringspunkt: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Inställning: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-msgid "Remove the loopback file?"
-msgstr "Ta bort loopback-filen?"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Ändra partitionstyp"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "Byter från ext2 till ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Var vill du montera loopback-filen %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kan inte inaktivera monteringspunkten eftersom denna partition\n"
-"används för loopback. Ta bort loopback först."
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Räknar ut FAT-filsystemets gränser"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Ändrar storlek"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Denna partition kan inte ändra storlek"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "All data på den här partitionen bör säkerhetskopieras."
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter storleksändring av partition %s, kommer all data på den att vara borta."
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Välj den nya storleken"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "Ny storlek i MB: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Vilken hårddisk vill du flytta den till?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Vilken sektor vill du flytta den till?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Flyttar"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Flyttar partition..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Välj en existerande RAID att addera till"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "ny"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Välj en existerande LVM att addera till"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "LVM-namn?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Denna partition kan inte användas för loopback."
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Loopback-filnamn: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-msgid "Give a file name"
-msgstr "Ange ett filnamn"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Filen används redan av en annan loopback, välj en annan."
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Filen finns redan. Använda den?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "enhet"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "nivå"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "blockstorlek"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Var försiktig: Detta moment är farligt."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Vilken typ av partitionering?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Jag vägrar skapa /boot så långt in på disken (på en cylinder > 1024).\n"
-"Antingen använder du LILO, som inte kommer fungera eller så\n"
-"använder du inte LILO och då behöver du inte /boot."
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Partitionen du har valt att använda som root (/) är fysiskt placerad\n"
-"efter den 1024:e cylindern på hårddisken och du har ingen /boot-partition.\n"
-"Om du tänkt använda LILO som starthanterare måste du lägga till en\n"
-"/boot-partition."
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Du har valt en mjukvaru-RAID-partition som root (/).\n"
-"Det finns ingen starthanterare som hanterar detta utan\n"
-"en /boot-partition. Se till att skapa en /boot-partition."
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partitionstabellen på disk %s kommer att skrivas till disk!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Du behöver starta om datorn innan ändringarna kan verkställas."
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter formateringen av partition %s kommer allt data på partitionen att "
-"försvinna."
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Formaterar"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formaterar loopback-filen %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formaterar partition %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Hide files"
-msgstr "Dölj filer"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Move files to the new partition"
-msgstr "Flytta filer till den nya partitionen"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Katalogen %s innehåller redan data\n"
-"(%s)"
-
-#: ../../diskdrake_interactive.pm_.c:906
-msgid "Moving files to the new partition"
-msgstr "Flyttar filerna till den nya partitionen"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr "Kopierar %s"
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, c-format
-msgid "Removing %s"
-msgstr "Tar bort %s"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Enhet: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-enhetsbokstav: %s (bara en gissning)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Typ: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Namn: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Start: sektor %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Storlek: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorer"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Cylinder %d till cylinder %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Formaterad\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Inte formaterad\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Monterad\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback-fil(er):\n"
-"   %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Förvald partition för uppstart\n"
-"    (för MS-DOS-start, inte för lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivå %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Blockstorlek %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskar %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback-filnamn: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Chansen finns att denna partition\n"
-"är en drivrutinspartition, du bör\n"
-"antagligen lämna den i fred.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Denna speciella Bootstrap-\n"
-"partition är till för att\n"
-"kunna starta flera operativsystem på ditt system.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Storlek: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometri: %s cylindrar, %s huvuden, %s sektorer\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Information: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskar %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitionstabellstyp: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "på buss %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Alternativ: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering av %s misslyckades"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Jag vet inte hur man formaterar %s i typ %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "montering misslyckades"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck misslyckades, med slutkod %d eller signal %d"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "montering misslyckades: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fel vid avmontering %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "enkel"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Du kan inte använda JFS på partitioner mindre än 16MB."
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Du kan inte använda ReiserFS på partitioner mindre än 32MB."
-
-#
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Monteringspunkter måste börja med /."
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Det finns redan en partition med monteringspunkt %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Du kan inte använda en LVM Logical Volume som monteringspunkt %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Denna katalog bör lämnas i root-filsystemet."
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Du behöver ett riktigt filsystem (ext2, reiserfs) för denna "
-"monteringspunkt.\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fel vid öppnande av %s för läsning: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ett fel har uppstått - inga giltiga enheter som kan användas för att skapa "
-"nya filsystem kunde hittas. Kontrollera din hårdvara för orsaken till "
-"problemet."
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Du har inga partitioner!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux är ett fleranvändarsystem, med detta menas att varje användare\n"
-"kan ha sina egna inställningar, sina egna filer och så vidare. Du kan\n"
-"läsa i användarmanualen för att lära dig mer. Men olikt \"root\", som\n"
-"är administratör, kan användarna som du lägger till här inte ändra\n"
-"någonting förutom sina egna filer och sina egna inställningar.\n"
-"Du måste skapa åtminstone en vanlig användare åt dig själv.\n"
-"Det kontot ska du använda i ditt dagliga arbete. Det är i och för\n"
-"sig väldigt praktiskt att logga in som \"root\" varje dag men det kan\n"
-"också vara väldigt farligt! Det minsta misstag kan innebära att ditt\n"
-"system inte fungerar längre. Om du gör ett allvarligt misstag som en\n"
-"vanlig användare förlorar du bara viss information och inte hela systemet.\n"
-"\n"
-"Först måste du ange ditt riktiga namn. Det här är inte obligatoriskt,\n"
-"du kan faktiskt skriva vad du vill. DrakX kommer att ta de första två\n"
-"orden som du skrev in i rutan och flytta över de till användarnamnet.\n"
-"Detta är namnet som den här användaren kommer att använda för att logga\n"
-"in på systemet. Du kan ändra det om du vill. Du måste sedan ange ett\n"
-"lösenord. En icke-privilegierad (vanlig) användares lösenord är inte\n"
-"lika viktigt som \"roots\" sett ur säkerhetssynpunkt, men det finns\n"
-"ingen anledning att ignorera det, det är ju trots allt dina filer som\n"
-"står på spel.\n"
-"\n"
-"Efter det att du klickat på \"Acceptera användare\" kan du sedan lägga\n"
-"till så många som du vill ha. Lägg till en användare för varje kompis som\n"
-"du har: din pappa eller din syster till exempel. När du har lagt till alla\n"
-"användare som du vill ha, välj \"Klar\".\n"
-"\n"
-"Om du klickar på knappen \"Avancerat\" kan du ändra det förvalda \"skalet\"\n"
-"för den användaren (bash är förvalt)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Listat ovan är de existerande Linux-partitionerna som hittats på din\n"
-"hårddisk. Du kan behålla valen som gjorts av guiden, de passar de flesta\n"
-"vanliga installationer. Om du gör några ändringar måste du åtminstone\n"
-"definiera en root-partition (\"/\"). Välj inte en för liten partition för\n"
-"då kommer du inte kunna installera tillräckligt med mjukvara. Om du vill\n"
-"lagra din data på en separat partition, behöver du också skapa en partition\n"
-"för /home\n"
-" (endast möjligt om du har mer än en Linux-partition tillgänglig).\n"
-"\n"
-"Varje partition listas som följer: \"Namn\", \"Kapacitet\".\n"
-"\n"
-"\"Namn\" är strukturerad på följande vis: \"hårddisktyp\", \"hårddisknummer"
-"\",\n"
-"\"partitionsnummer\" (till exempel, \"hda1\").\n"
-"\n"
-"\"Hårddisktyp\" är \"hd\" om din hårddisk är en IDE-hårddisk och\n"
-"\"sd\" om det är en SCSI-hårddisk.\n"
-"\n"
-"\"Hårddisknummer\" är alltid en bokstav efter \"hd\" eller \"sd\". För IDE-\n"
-"hårddiskar:\n"
-"\n"
-" * \"a\" betyder \"master-hårddisk på den primära IDE-kontrollern\",\n"
-"\n"
-" * \"b\" betyder \"slavhårddisk på den primära IDE-kontrollern\",\n"
-"\n"
-" * \"c\" betyder \"master-hårddisk på den sekundära IDE-kontrollern\",\n"
-"\n"
-" * \"d\" betyder \"slavhårddisk på den sekundära IDE-kontrollern\".\n"
-"\n"
-"Med SCSI-hårddiskar betyder ett \"a\" \"lägsta SCSI-ID\", ett \"b\" betyder\n"
-"\"andra lägsta SCSI-ID\", etc."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Installationen av Mandrake Linux är utspridd på flera CD-skivor. DrakX\n"
-"vet om ett valt paket finns på en annan CD-skiva och kommer att mata ut\n"
-"den aktuella CD:n och be dig sätta in en annan om det krävs."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Det är nu dags att specificera vilka program du vill installera på ditt\n"
-"system. Det finns flera tusen paket tillgängliga för Mandrake Linux och\n"
-"det är inte meningen att du ska känna till alla.\n"
-"\n"
-"Om du utför en standardinstallation från CD-romskivor kommer du först att\n"
-"få specificera vilka CD-skivor du förfogar över. Markera rutorna som\n"
-"motsvarar de CD-skivor du har och klicka sedan \"OK\".\n"
-"\n"
-"Paketen är sorterade guppvis motsvarande vad du har tänkt använda din\n"
-"maskin till. Grupperna är sorterade i fyra sektioner:\n"
-"\n"
-" * \"Arbetsstation\": Om du ska använda din maskin som arbetsstation,\n"
-"välj en eller flera av de motsvarande grupperna.\n"
-"\n"
-" * \"Grafisk miljö\": Här väljer du den grafiska miljö som du vill använda.\n"
-"Välj åtminstone en om du vill ha ett grafiskt gränssnitt på din "
-"arbetsstation!\n"
-"\n"
-" * \"Utveckling\": om maskinen ska användas för programmering så välj de\n"
-"önskade grupperna.\n"
-"\n"
-" * \"Server\": Slutligen, om maskinen ska användas som server, kan du här\n"
-"välja de mest vanliga tjänsterna som du vill ha installerade på maskinen.\n"
-"\n"
-"Om du flyttar musmarkören över ett gruppnamn får du se en kort\n"
-"förklaringstext om just den gruppen.\n"
-"\n"
-"Om du klickar på knappen \"Avancerat\", kan du välja enskilda paket.\n"
-"Detta är användbart om du vet vilka paket du vill ha installerade eller\n"
-"om du vill ha fullständig kontroll över vad som blir installerat.\n"
-"\n"
-"Om du startade installationen i uppdateringsläge, kan du avmarkera alla\n"
-"grupper för att undvika att installera några nya paket. Detta är användbart\n"
-"om du ska laga eller uppdatera ett existerande system."
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Slutligen, beroende på om du väljer att installera enskilda paket eller\n"
-"inte, kommer du att få se ett träd innehållande alla paket klassificerade\n"
-"efter grupper och undergrupper. Om du bläddrar i trädet kan du välja hela\n"
-"grupper, undergrupper, eller enskilda paket.\n"
-"\n"
-"När du väljer ett paket i trädet, visas en beskrivning till höger.\n"
-"När du har valt klart, klicka på knappen \"Installera\". Då kommer själva\n"
-"installationen att starta. Beroende på hastigheten på din hårdvara och\n"
-"på hur många paket som ska installeras kan det här processen ta en stund.\n"
-"En uppskattad återstående tid visas på skärmen för att visa dig ungefär hur\n"
-"lång tid som är kvar av installationen, du kanske hinner gå och dricka en\n"
-"kopp kaffe.\n"
-"\n"
-"!! Om det skulle visa sig att ett server-paket har valts antingen\n"
-"oavsiktligt eller om det var med i en hel grupp, kommer du att få bekräfta\n"
-"att du verkligen vill att dessa servrar ska installeras. Under Mandrake\n"
-"Linux startas installerade servrar vid uppstart. Även fast de är säkra när\n"
-"den här distributionen släpps, kan det hända att säkerhetsluckor hittats\n"
-"i efterhand. Om du inte vet vad en specifik tjänst gör eller varför den\n"
-"blir installerad, klicka \"Nej\" här. Om du klickar \"Ja\" kommer de "
-"listade\n"
-"tjänsterna att installeras och startas automatiskt!\n"
-"\n"
-"Alternativet \"Automatiska beroenden\" inaktiverar helt enkelt\n"
-"varningsdialogrutan som visas när installationsprogrammet automatiskt\n"
-"väljer ett paket. Detta inträffar därför att det har upptäckts att ett\n"
-"beroende med ett annat paket måste tillfredsställas för att detta paket\n"
-"ska kunna installeras ordentligt.\n"
-"\n"
-"Den lilla diskettikonen i slutet på listan låter dig ladda en paketlista\n"
-"som du kan ha gjort vid en tidigare installation. När du klickar på den \n"
-"här ikonen kommer du att bli ombedd om att stoppa i en diskett som du\n"
-"tidigare kan ha skapat vid slutet av en annan installation. Se det andra\n"
-"tipset i det sista steget hur du gör för att skapa en sådan diskett."
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Om du vill ansluta din dator till Internet eller till ett lokalt nätverk,\n"
-"välj det korrekta alternativet. Slå på din enhet innan du väljer det\n"
-"korrekta alternativet så att DrakX kan hitta den automatiskt.\n"
-"\n"
-"Mandrake Linux låter dig konfigurera din Internetanslutning vid\n"
-"installationen. Tillgängliga anslutningar är: traditionellt modem,\n"
-"ISDN-modem, ADSL-anslutning, kabelmodem och slutligen LAN-anslutning\n"
-"(Ethernet).\n"
-"\n"
-"Här kommer vi inte att gå in på detaljerna om varje anslutning. Se bara\n"
-"till att du har alla uppgifter från din Internetleverantör eller\n"
-"systemadministratör till hands.\n"
-"\n"
-"Du kan titta i kapitlet som handlar om Internetanslutning i manualen för\n"
-"detaljer om de olika inställningarana, eller så kan du helt enkelt vänta\n"
-"till ditt system är installerat och använda programmet som beskrivs där för\n"
-"att ställa in din anslutning.\n"
-"\n"
-"Om du vill konfigurera nätverket efter installationen eller om du har\n"
-"konfigurerat klart din nätverksanslutning, klicka på \"Avbryt\"."
-
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Välj vilka tjänster du vill starta vid uppstart.\n"
-"\n"
-"Här visas alla tjänster tillgängliga med den aktuella installationen.\n"
-"Titta igenom dem och avmarkera dem du inte behöver vid uppstart.\n"
-"\n"
-"Du kan få en kort förklaringstext om en tjänst genom att välja den\n"
-"specifika tjänsten. Om du är osäker på om en tjänst är användabar eller\n"
-"inte, lämna då den tjänsten orörd.\n"
-"\n"
-"Var extra försiktig i dina val om den här datorn ska användas som en\n"
-"server: du vill antagligen inte starta tjänster som du inte behöver.\n"
-"Kom ihåg att flera tjänster kan innebära en risk om de aktiveras på en "
-"server.\n"
-"Som generell regel, välj bara de tjänster du verkligen behöver."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux hanterar tiden i GMT (Greenwich Manage Time) och översätter den\n"
-"till lokal tid enligt tidszonen du valde."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-"X (för X Window System) är hjärtat i GNU/Linux grafiska gränssnitt\n"
-"på vilket alla grafiska skrivbordsmiljöer (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) som kommer med Mandrake Linux stödjer sig på. I den\n"
-"här sektionen kommer DrakX att försöka konfigurera X automatiskt.\n"
-"\n"
-"Det är väldigt sällsynt att det misslyckas, det kan hända om du har\n"
-"väldigt gammal hårdvara (eller väldigt ny). Om det lyckas kommer X att\n"
-"startas automatsikt med den bästa tänkbara upplösningen beroende på\n"
-"storleken på din bildskärm. Ett fönster kommer att visas och fråga dig\n"
-"om du kan se det.\n"
-"\n"
-"Om du gör en \"Expert\"-installation kommer du in i konfigurationsguiden\n"
-"för X. Se den motsvarande sektionen i manualen för mer information\n"
-"om den här guiden.\n"
-"\n"
-"Om du kan se meddelandet och svarar \"Ja\", kommer DrakX att fortsätta till\n"
-"nästa steg. Om du inte kan se meddelandet, betyder det att konfigurationen\n"
-"var fel och testet kommer automatiskt att avslutas efter 10\n"
-"sekunder och skärmen återställs."
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Första gången du provar X-konfigurationen kanske du inte är nöjd med\n"
-"bilden (skärmen är för liten, förskjuten till vänster eller höger...).\n"
-"Även om X startar korrekt kommer DrakX att fråga dig om konfigurationen\n"
-"passar dig. DrakX kommer även föreslå en ändring av konfigurationen genom\n"
-"att visa en lista på alla giltiga lägen som den kunde hitta och be dig "
-"välja\n"
-"ett.\n"
-"\n"
-"Som en sista utväg, om du fortfarande inte kan få X att fungera, välj\n"
-"\"Ändra grafikkort\" och sedan \"Unlisted card\". När du får frågan om\n"
-"vilken server du vill använda, välj \"FBDev\". Detta är ett felsäkert\n"
-"alternativ som fungerar med alla moderna grafikkort. Välj sedan\n"
-"\"Testa igen\" för att vara säker på att det fungerar."
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Slutligen kommer du att få en fråga om du vill se det grafiska gränssnittet\n"
-"vid uppstart. Observera att du kommer att få den frågan även om du valde\n"
-"att inte testa konfigurationen. Du vill nog svara \"Nej\" om maskinen ska\n"
-"användas som server eller om du inte lyckades få det grafiska att fungera."
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux CD-romskiva har ett inbyggt säkerhetsläge. Du kan komma åt\n"
-"det genom att starta från CD-skivan och sedan trycka på >>F1<<-tangenten\n"
-"vid uppstart och skriva >>rescue<< vid prompten. Om din dator inte kan "
-"starta\n"
-"från CD-romskivan bör du komma tillbaka till det här steget i åtminstone "
-"två\n"
-"situationer:\n"
-"\n"
-" * när starthanteraren installeras kommer DrakX att skriva över "
-"startsektorn\n"
-"(MBR) på din huvuddisk (om du inte använder en annan starthanterare) så att\n"
-"du kan starta antingen Windows eller GNU/Linux (om du nu har Windows\n"
-"installerat på din dator). Om du blir tvungen att installera om Windows\n"
-"så kommer Microsofts installationsprogram att skriva över startsektorn\n"
-"vilket leder till att du inte kan starta GNU/Linux!\n"
-"\n"
-" * om ett problem uppstår så att du inte kan starta GNU/Linux från\n"
-"hårddisken kommer den här disketten att vara det enda sättet att starta\n"
-"GNU/Linux. Den innehåller ett antal systemverktyg som kan användas för att\n"
-"återställa ett system som kraschat på grund av strömavbrott, en olycklig\n"
-"felstavning, en felskrivning i ett lösenord eller av någon annan anledning.\n"
-"\n"
-"När du klickar på det här steget kommer du att bli ombedd att stoppa in en\n"
-"diskett i diskettstationen. Disketten som du stoppar in måste vara tom "
-"eller\n"
-"inte innehålla någon data som du vill ha kvar. Du behöver inte formatera "
-"den\n"
-"eftersom DrakX kommer att skriva om hela disketten."
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Nu måste du välja var du vill installera ditt Mandrake\n"
-"Linux-system på din hårddisk. Om den är tom eller om ett befintligt\n"
-"operativsystem använder allt tillgängligt utrymme behöver du partitionera\n"
-"den. Att partitionera en hårddisk går ut på att man logiskt delar upp den\n"
-"för att skapa utrymme för ditt nya Mandrake Linux-system.\n"
-"\n"
-"Eftersom resultatet av en partitionering vanligtvis inte går att ångra\n"
-"kan partitionering kännas skrämmande om du är en ovan användare.\n"
-"Denna guide förenklar processen. Innan du börjar, titta i manualen\n"
-"och ta den tid du behöver.\n"
-"\n"
-"Om du installerar i Expert-läget kommer du in i Mandrake Linux\n"
-"partitionsverktyg: Diskdrake. Detta program låter dig finjustera dina\n"
-"partitioner. Se kapitlet Diskdrake i manualen. Du kan använda det från\n"
-"installationsgränsnittet som det beskrivs här genom att klicka på knappen\n"
-"Guide i dialogrutan.\n"
-"\n"
-"Om partitioner redan är definierade (från en tidigare installation eller av\n"
-"ett annat partitionsverktyg), behöver du bara välja dem du vill använda\n"
-"för att installera ditt Linux-system.\n"
-"\n"
-"Om partitioner inte redan har definierats, behöver du skapa dem.\n"
-"För att göra det använd guiden tillgänglig ovan. Beroende på din\n"
-"hårddiskkonfiguration, kommer flera lösningar att finnas tillgängliga:\n"
-"\n"
-" * \"Använd ledigt utrymme\": det här leder till en automatisk\n"
-"partitionering av din tomma disk. Du kommer inte att få några fler frågor.\n"
-"\n"
-" * \"Använd existerande partition\": guiden har hittat en eller flera\n"
-"Linux-partitioner på din hårddisk. Om du vill använda dem, välj detta\n"
-"alternativ.\n"
-"\n"
-" * \"Använd ledigt utrymme på Windows-partitionen\": Om Microsoft Windows\n"
-"är installerat på din hårddisk och tar upp allt tillgängligt utrymme, måste\n"
-"du skapa ledigt utrymme för Linux-data. För att göra det kan du radera din\n"
-"Microsoft Windows-partition och data (se lösningarna \"Rensa hela\n"
-"hårddisken\" eller \"Expert-läge\") eller ändra storlek på din Microsoft\n"
-"Windows-partition.\n"
-"Ändra storlek kan utföras utan att förlora data. Denna lösning "
-"rekommenderas\n"
-"om du vill använda både Mandrake Linux och Microsoft Windows på samma "
-"dator.\n"
-"\n"
-"   Innan du väljer denna lösning måste du förstå att storleken på din\n"
-"Microsoft Windows-partition kommer att bli mindre än den är för närvarande.\n"
-"Det betyder att du kommer att ha mindre utrymme under Microsoft Windows för\n"
-"att lagra data eller installera ny mjukvara.\n"
-"\n"
-" * \"Rensa hela hårddisken\": Om du vill ta bort all data och alla\n"
-"partitioner som finns på din hårddisk och ersätta dem med ditt nya\n"
-"Mandrake Linux-system, väljer du detta alternativ. Var försiktig med\n"
-"denna lösning, du kommer inte att kunna ångra ditt val efter bekräftningen.\n"
-"\n"
-"   Om du väljer detta alternativ kommer all data på din disk att tas bort!\n"
-" * \"Ta bort Windows\": tar helt enkelt bort allt på disken och startar en\n"
-"fräsch partitionering från grunden. All data på din disk kommer att tas\n"
-"bort.\n"
-"\n"
-"   Om du väljer detta alternativ kommer all data på din disk att tas bort.!\n"
-"\n"
-" * \"Expert-läge\": om du vill partitionera din hårddisk manuellt kan du\n"
-"välja detta alternativ. Var försiktig innan du väljer denna lösning.\n"
-"Detta alternativ är kraftfullt men det innebär samtidigt en stor risk.\n"
-"Du kan väldigt lätt förlora all din data.\n"
-"Välj inte denna lösning om du inte vet vad du gör."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Installationen är nu färdig och ditt GNU/Linux-system är klart\n"
-"att användas. Klicka bara på OK för att starta om systemet. Du kan starta\n"
-"GNU/Linux eller Windows, beroende på vilket du vill använda (om du har\n"
-"dubbla operativsystem), så fort datorn har startat upp.\n"
-"\n"
-"Knappen \"Avancerat\" visar ytterligare två knappar som är till för att:\n"
-"\n"
-" * Generera en automatisk installationsdiskett: för att skapa en\n"
-"installationsdiskett som automatiskt utför en hel installation utan\n"
-"hjälp av en operatör, likande installationen du just konfigurerade.\n"
-"\n"
-"   Observera att två olika alternativ finns tillgängliga när du klickar på\n"
-"knappen:\n"
-"\n"
-"    * \"Repris\". Det här är en delvis automatisk installation eftersom\n"
-"partitioneringssteget (och endast detta) fortfarande är interaktivt.\n"
-"\n"
-"    * \"Automatisk\". Helt automatisk installation: allt innehåll på\n"
-"hårddisken skrivs om och all data går förlorad.\n"
-"\n"
-"   Den här funktionen är väldigt praktisk om du ska installera ett större\n"
-"antal likande datorer. Se sektionen \"Auto install\" på vår hemsida.\n"
-"\n"
-" * \"Spara paketval\"(*): sparar föregående paketval.\n"
-"När du sedan gör en annan installation, sätt in disketten i "
-"diskettstationen\n"
-"och kör installationen fram till hjälpskärmen F1, och skriv >>linux defcfg="
-"\"floppy\"<<.\n"
-"\n"
-"(*) Du behöver en FAT-formaterad diskett (för att skapa en under GNU/Linux,\n"
-"skriv \"mformat a:\")"
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Alla partitioner som har blivit definierade måste formateras innan\n"
-"användning (formatering betyder skapa filsystem).\n"
-"\n"
-"I det här läget kanske du vill omformatera några redan existerande\n"
-"partitioner för att rensa dem på data. Om du vill göra det, välj de\n"
-"partitioner du vill formatera.\n"
-"\n"
-"Observera att det inte är nödvändigt att omformatera alla existerande\n"
-"partitioner. Du måste omformatera de partitioner som innehåller själva\n"
-"operativsystemet. (som t ex \"/\", \"/usr\" eller \"/var\") men du behöver\n"
-"inte formatera partitioner som innehåller data du vill behålla\n"
-"(vanligtvis /home).\n"
-"\n"
-"Var försiktig när du väljer partitioner, för efter formatering kommer all\n"
-"data att vara raderat och du kommer inte att kunna återskapa någonting.\n"
-"\n"
-"Klicka på \"OK\" när du är redo att formatera partitionerna.\n"
-"\n"
-"Klicka på \"Avbryt\" om du vill välja andra partitioner att installera ditt\n"
-"nya Mandrake Linux-system på.\n"
-"\n"
-"Klicka på \"Avancerat\" för att välja på vilka partitioner du vill leta\n"
-"efter felaktiga block."
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Ditt nya operativsystem Mandrake Linux håller på att installeras.\n"
-"Beroende på hur många paket som ska installeras och på din dators\n"
-"hastighet, kan detta moment ta några minuter eller betydligt längre tid.\n"
-"\n"
-"Var god vänta."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"Innan du fortsätter bör du noga läsa licensen. Den täcker hela\n"
-"Mandrake Linux-distributionen och om du inte samtycker med den,\n"
-"klicka på knappen \"Vägrar\" som omedelbart avbryter installationen.\n"
-"För att fortsätta installationen klicka på knappen \"Acceptera\"."
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Nu är det dags att välja vilken säkerhetsnivå som ska tillämpas på\n"
-"datorn. En tumregel är att ju mer tillgänglig en dator är och ju viktigare\n"
-"dess data är, desto högre bör säkerhetsnivån vara.\n"
-"Det bör dock nämnas att nivån på säkerheten påverkar hur lättanvänd\n"
-"datorn blir. Se MSEC-kapitlet i \"Reference Manual\" för mer information\n"
-"om de olika säkerhetsnivåerna.\n"
-"\n"
-"Om du inte är säker på vad du ska välja, behåll det förvalda värdet."
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Nu måste du välja vilka partitioner som ska användas för installationen av\n"
-"ditt Mandrake Linux-system. Om partitioner redan har definierats, antingen\n"
-"från en tidigare installation av GNU/Linux eller av ett annat\n"
-"partitionsverktyg, kan du använda dessa. Om partitioner inte redan har\n"
-"definierats, måste du skapa dem.\n"
-"\n"
-"För att skapa partitioner måste du först välja en hårddisk. Du kan välja\n"
-"disken som ska partitioneras genom att klicka på \"hda\" för den första\n"
-"IDE-disken, \"hdb\" för den andra, \"sda\" för den första SCSI-disken\n"
-"och så vidare.\n"
-"\n"
-"För att partitionera den valda disken kan du använda dessa alternativ:\n"
-"\n"
-" * \"Nollställ\": det här alternativet tar bort alla partitioner på\n"
-"den valda hårddisken.\n"
-"\n"
-" * \"Allokera automatiskt\": det här alternativet låter dig automatiskt\n"
-"skapa Ext2- och växlingspartitioner på det lediga utrymmet på hårddisken.\n"
-"\n"
-" * \"Rädda partitionstabell\": om din partitionstabell är förstörd kan du\n"
-"försöka återställa den genom att använda det här alternativet.\n"
-"Var försiktig och kom ihåg att det kan misslyckas.\n"
-"\n"
-" * \"Ångra\": använd detta alternativ för att hoppa över dina ändringar\n"
-"\n"
-" * \"Ladda om\": du kan använda detta alternativ för att ångra alla\n"
-"ändringar och ladda din initiala partitionstabell.\n"
-"\n"
-" * \"Guide\": använd det här alternativet om du vill använda en guide för\n"
-"att partitionera din hårddisk. Det här alternativet rekommenderas om du\n"
-"inte har god kunskap om partitionering.\n"
-"\n"
-"* \"Återställ från diskett\": det här alternativet låter dig återställa en\n"
-"sparad partitionstabell från diskett.\n"
-"\n"
-" * \"Spara till diskett\": sparar partitionstabellen till en diskett.\n"
-"Användbart om du senare behöver återställa partitionstabellen. Du\n"
-"rekommenderas att utföra detta steg.\n"
-"\n"
-" * \"Färdig\": när du har partitionerat klart din hårddisk, kommer detta\n"
-"att spara ändringarna till disk.\n"
-"\n"
-"Observera: du kan hoppa till vilket alternativ som helst med tangentbordet.\n"
-"Navigera genom partitionerna med tangenten tabb och upp- och nerpilarna.\n"
-"\n"
-"När en partition är vald kan du använda:\n"
-"\n"
-" * Ctrl-c för att skapa en ny partition (när en tom partition har valts);\n"
-"\n"
-" * Ctrl-d för att ta bort en partition;\n"
-"\n"
-" * Ctrl-m för att ange monteringspunkten.\n"
-"\n"
-"Om du installerar på en PPC-maskin, vill du nog skapa en en liten HFS-\n"
-"partition (\"bootstrap\") på åtminstone 1 MB. Den kommer att användas av\n"
-"starthanteraren Yaboot. Om du gör partitionen lite större, säg 50 MB,\n"
-"kan du använda en del för att lagra en reservkärna och en ramdisk.\n"
-"Detta är användbart om det skulle uppstå en nödsituation som gör att\n"
-"du inte kan starta med den vanliga kärnan."
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Fler än en Microsoft Windows-partition har hittats på din hårddisk.\n"
-"Välj vilken av dem du vill ändra storlek på för att kunna installera ditt\n"
-"nya operativsystem Mandrake Linux.\n"
-"\n"
-"Varje partition listas som följer: \"Linux-namn\", \"Windows-namn\"\n"
-"\"Kapacitet\".\n"
-"\n"
-"\"Linux-namn\" är strukturerad på följande vis: \"hårddisktyp\", "
-"\"hårddisknummer\",\n"
-"\"partitionsnummer\" (till exempel, \"hda1\").\n"
-"\n"
-"\"Hårddisktyp\" är \"hd\" om din hårddisk är en IDE-hårddisk och\n"
-"\"sd\" om det är en SCSI-hårddisk.\n"
-"\n"
-"\"Hårddisknummer\" är alltid en bokstav efter \"hd\" eller \"sd\". Med IDE-\n"
-"hårddiskar:\n"
-"\n"
-" * \"a\" betyder \"master-hårddisk på den primära IDE-kontrollern\",\n"
-"\n"
-" * \"b\" betyder \"slavhårddisk på den primära IDE-kontrollern\",\n"
-"\n"
-" * \"c\" betyder \"master-hårddisk på den sekundära IDE-kontrollern\",\n"
-"\n"
-" * \"d\" betyder \"slavhårddisk på den sekundära IDE-kontrollern\".\n"
-"\n"
-"Med SCSI-hårddiskar, betyder \"a\" \"lägsta SCSI-ID\", ett \"b\" betyder\n"
-"\"andra lägsta SCSI-ID\", etc.\n"
-"\n"
-"\"Windows-namn\" är bokstaven på din hårddisk under Windows (den första\n"
-"disken eller partitionen kallas \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Var god vänta. Den här operationen kan ta flera minuter."
-
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Drakx vill nu veta om du vill utföra en standardinstallation\n"
-"(\"Rekommenderad\") eller om du vill ha större kontroll över\n"
-"vad som blir installerat (\"Expert\".\n"
-"Du kan också välja om du vill göra en ny installation eller uppdatera ett\n"
-"befintligt Mandrake Linux-system. Om du klickar på \"Installera\" kommer\n"
-"det gamla systemet att helt tas bort. Välj \"Uppdatera\" om du vill\n"
-"uppdatera eller laga ett befintligt system.\n"
-"\n"
-"Välj \"Installera\" om det inte finns någon tidigare version av Mandrake\n"
-"Linux installerad eller om du önskar använda flera operativsystem.\n"
-"\n"
-"Välj \"Uppdatera\" om du önskar uppdatera eller laga en redan befintlig\n"
-"installation av Mandrake Linux.\n"
-"\n"
-"Baserat på din kunskap om GNU/Linux kan du välja en av följande nivåer för\n"
-"installation eller uppdatering av ditt Mandrake Linux-operativsystem:\n"
-"\n"
-" * Rekommenderad: om du aldrig har installerat ett GNU/Linux operativsystem\n"
-"välj detta. Installationen kommer att vara väldigt enkel och du får bara\n"
-"några få frågor.\n"
-"\n"
-" * Expert: om du har god kunskap om GNU/Linux kan du välja denna\n"
-"installationsklass. Expert-installationen låter dig utföra en mycket\n"
-"anpassad installation. En del frågor kan vara väldigt svåra att besvara om\n"
-"du inte har god kunskap om GNU/Linux. Välj inte denna installationsklass\n"
-"om du inte är helt säker på vad du gör."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"I de flesta fall väljer DrakX rätt tangentbord åt dig (beroende på vilket\n"
-"språk du har valt) och det hela sker automatiskt. Men det kan hända\n"
-"att du har ett tangentbord som inte helt motsvarar ditt språk: om du\n"
-"till exempel är en engelsktalande schweizare kanske du ändå vill att\n"
-"ditt tangentbord är schweiziskt. Eller om du talar engelska och bor i\n"
-"Quebec kan du befinna dig i en liknande situation. I båda fallen behöver\n"
-"du gå tillbaka till detta installationssteg och välja önskat tangentbord\n"
-"ur listan.\n"
-"\n"
-"Klicka på knappen \"Mer\" för en komplett lista över tillgängliga\n"
-"tangentbord."
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-"Välj det språk du önskar använda för installation och systemanvändning.\n"
-"\n"
-"Om du klickar på knappen \"Avancerat\" kan du välja andra språk som du vill\n"
-"ha installerade på din arbetsstation. Genom att välja andra språk så kommer\n"
-"språkspecifika filer för systemdokumentation och program att installeras.\n"
-"Om du till exempel får besök av personer från Spanien som behöver använda\n"
-"din dator, välj Engelska som huvudspråket i trädvyn, och under den "
-"avancerade\n"
-"sektionen, klicka på den gråa stjärnan som motsvarar \"Spanska|Spanien\".\n"
-"\n"
-"Observera att flera språk kan installeras. Så fort du har valt alla\n"
-"ytterligare språk, klicka på knappen \"OK\" för att fortsätta."
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-"Som standard antar DrakX att du har mus med två knappar och kommer att\n"
-"ställa in den för knapp 3-emulering. DrakX kommer automatiskt att veta\n"
-"om musen är av typ PS/2, seriell eller USB.\n"
-"\n"
-"Om du vill specificera en annan mustyp välj då den i listan\n"
-"som visas.\n"
-"\n"
-"Om du väljer en annan mus än den förvalda kommer en testskärm att\n"
-"visas. Använd musknapparna och hjulet för att verifiera att inställningarna\n"
-"är korrekt. Om musen inte fungerar ordentligt tryck på mellanslag eller\n"
-"Enter för att avbryta och välja igen."
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Välj den korrekta porten. COM1-porten under MS Windows\n"
-"har namnet ttyS0 under GNU/Linux."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Det här är det viktigaste steget för säkerheten i ditt GNU/Linux-system:\n"
-"du ska ange \"root\"-lösenordet. \"root\" är systemets administratör och\n"
-"den enda som har rättigheter att göra uppdateringar, lägga till användare,\n"
-"ändra på systemets övergripande konfiguration, osv. Kort sagt, \"root\" kan\n"
-"göra allt! Därför måste du välja ett lösenord som är svårt att lista ut - \n"
-"DrakX talar om för dig om du väljer ett lösenord som är för lätt. Som du\n"
-"ser har du möjlighet att inte ange något lösenord alls, men vi avråder från\n"
-"det, om bara för att även om du kör GNU/Linux kan du ha andra "
-"operativsystem\n"
-"som begår misstag. Eftersom \"root\" kan gå förbi alla begränsningar och\n"
-"oavsiktligt radera all data på partitioner, kan de manipulera med\n"
-"partitionerna själva på ett oförsiktigt sätt, därför är det viktigt att\n"
-"det är svårt att bli \"root\".\n"
-"\n"
-"Lösenordet ska vara en blandning av numeriska tecken och bokstäver och\n"
-"minst åtta tecken långt. Skriv aldrig ner \"root\"-lösenordet - det\n"
-"ökar risken för ett intrång i systemet.\n"
-"\n"
-"Gör dock inte lösenordet för långt och komplicerat, för du måste\n"
-"kunna komma ihåg det utan allt för mycket besvär.\n"
-"\n"
-"Lösenordet visas inte på skärmen när du skriver in det. Det är därför\n"
-"du får skriva det två gånger, för att undvika att du skriver fel. Om du\n"
-"gör samma skrivfel två gånger behöver du använda detta \"felaktiga\"\n"
-"lösenord första gången du loggar in.\n"
-"\n"
-"I expertläget får du frågan om du vill ansluta mot en autentiseringsserver,\n"
-"exempelvis NIS eller LDAP.\n"
-"\n"
-"Om ditt nätverk använder LDAP (eller NIS) för autentisering, välj\n"
-"\"LDAP\" (eller \"NIS\") som autentisering. Om du är osäker, fråga\n"
-"din nätverksadministratör.\n"
-"\n"
-"Om din dator inte är ansluten till något administrerat nätverk uppmanas du\n"
-"att välja \"Lokala filer\" som autentisering."
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-"LILO och GRUB är starthanterare för GNU/Linux. Det här steget är\n"
-"vanligtvis helt automatiskt. DrakX analyserar startsektorn på\n"
-"disken och uppträder lite olika beroende på vad den hittar där:\n"
-"\n"
-" * om en Windows-startsektor hittas, kommer den att ersättas med en GRUB/"
-"LILO-\n"
-"startsektor. Du kommer att kunna ladda antingen GNU/Linux eller ett annat "
-"OS;\n"
-"\n"
-" * om en GRUB- eller LILO-startsektor hittas, kommer den att ersättas med "
-"en\n"
-"ny;\n"
-"\n"
-"Vid tveksamheter kommer DrakX att visa en dialogruta med diverse "
-"alternativ.\n"
-"\n"
-" * \"Starthanterare som ska användas\": du har tre val:\n"
-"\n"
-"    * \"LILO med grafisk meny\": om du föredrar LILO med grafiskt\n"
-"gränssnitt.\n"
-"\n"
-"    * \"GRUB\": om du föredrar GRUB (textbaserad meny).\n"
-"\n"
-"    * \"LILO med textbaserad meny\": om du föredrar LILO med textbaserad "
-"meny.\n"
-"\n"
-" * \"Startenhet\": i de flesta fall behöver du inte ändra det förvalda "
-"värdet\n"
-"(\"/dev/hda\"), men om du föredrar så kan starthanteraren installeras på "
-"den\n"
-"andra hårddisken (\"/dev/hdb\"), eller till och med på en diskett (\"/dev/fd0"
-"\").\n"
-"\n"
-" * \"Fördröjning innan förvald avbild startar\": vid omstart av datorn är "
-"detta\n"
-"tiden som användaren har på sig att välja ett annat värde än det förvalda\n"
-"i starthanterarens meny.\n"
-"\n"
-"!! Om du väljer att inte installera en starthanterare (genom att välja\n"
-"\"Avbryt\"), måste du se till att du har ett annat sätt att starta ditt "
-"Mandrake\n"
-"Linux-system! Var också säker på att du vet vad du gör innan du ändrar\n"
-"några av alternativen!\n"
-"\n"
-"Om du klickar på knappen \"Avancerat\" i den här dialogrutan kommer du att\n"
-"erbjudas många avancerade alternativ som är reserverade för "
-"expertanvändaren.\n"
-"\n"
-"Mandrake Linux installerar sin egen starthanterare, vilken låter dig starta\n"
-"antingen GNU/Linux eller något annat operativsystem som du kan ha "
-"installerat på\n"
-"din dator.\n"
-"\n"
-"Om det finns något annat operativsystem installerat på din dator kommer det\n"
-"att automatiskt läggas till startmenyn. Här kan du välja att finjustera\n"
-"de existerande alternativen. Om du dubbelklickar på en existerade post kan "
-"du\n"
-"ändra dess parametrar eller helt ta bort den; \"Lägg till\" skapar en ny "
-"post;\n"
-"och \"Färdig\" fortsätter till nästa installationssteg."
-
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) och GRUB är starthanterare: de kan starta\n"
-"antingen GNU/Linux eller något annat operativsystem installerat\n"
-"på din dator. Vanligtvis så hittas och installeras dessa andra\n"
-"operativsystem automatiskt. Om så inte är fallet kan du lägga till\n"
-"en post manuellt i den här skärmen. Var försiktig så att du inte\n"
-"väljer fel parametrar.\n"
-"\n"
-"Du kanske inte vill att någon annan ska få åtkomst till dessa andra\n"
-"operativsystem. Om så är fallet kan du ta bort de motsvarande posterna.\n"
-"Men om du gör det, måste du använda en startdiskett för att kunna starta\n"
-"dessa andra operativsystem!"
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Du måste indikera var du vill placera informationen som krävs för att\n"
-"starta GNU/Linux.\n"
-"\n"
-"Om du inte vet exakt vad du gör, välj \"Första sektorn på enheten\n"
-"(MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX letar nu efter IDE-enheter i din dator. DrakX kommer också att\n"
-"leta efter PCI SCSI-kort på ditt system. Om DrakX hittar ett SCSI-kort\n"
-"och känner till rätt drivrutin, kommer kortet att installeras automatiskt.\n"
-"\n"
-"Om du har något SCSI-kort som DrakX inte hittar, kommer du i alla fall att\n"
-"få frågan om det finns något PCI SCSI-kort i ditt system. Om det inte finns\n"
-"något kort kan du klicka på \"Nej\". Om du klickar \"Ja\" kommer en lista\n"
-"med kort att presenteras, från vilken du kan välja ditt specifika kort.\n"
-"Om du är osäker kan du markera \"Visa hårdvaruinformation\" och klicka\n"
-"\"OK\" så visas en lista över vilken hårdvara som hittats i din maskin.\n"
-"Undersök listan med hårdvara och klicka sedan på knappen \"OK\" för att\n"
-"återgå till SCSI-gränssnittsfrågan.\n"
-"\n"
-"Om du blir tvungen att manuellt specificera ditt kort kommer DrakX att\n"
-"fråga om du vill ange alternativ för det. Du bör tillåta DrakX att själv\n"
-"undersöka hårdvaran efter alternativ. Detta fungerar oftast bra.\n"
-"\n"
-"Om inte, kommer du att behöva ange alternativ för drivrutinen. Se \"User\n"
-"Guide\" (kapitel 3, avsnittet \"Collective informations on your hardware\")\n"
-"för tips om hur du får tag på information från hårdvarudokumentation,\n"
-"tillverkarens hemsida (om du har tillgång till Internet) eller från\n"
-"Microsoft Windows (om du har det på ditt system)."
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Du kan lägga till ytterligare alternativ för yaboot, antingen för andra\n"
-"operativsystem, alternativa kärnor, eller startavbildning för\n"
-"nödsituationer.\n"
-"\n"
-"För andra operativsystem består alternativet bara av en etikett\n"
-"och root-partitionen.\n"
-"\n"
-"För Linux finns det några olika alternativ:\n"
-"\n"
-" * Label: helt enkelt namnet som du behöver skriva vid yaboot-prompten\n"
-"för att välja detta startalternativ.\n"
-"\n"
-" * Image: namnet på kärnan du vill starta. Vanligtvis vmlinux\n"
-"eller en variationen på vmlinux med ett tillägg.\n"
-"\n"
-" * Root: \"root\"-enheten eller \"/\" för din Linux-installation.\n"
-"\n"
-"* Append: med Apple-hårdvara används tilläggsalternativet för kärnan ganska\n"
-"ofta för att initialisera videohårdvara, eller för att aktivera "
-"musemulering\n"
-"med tangentbordet eftersom andra och tredje musknappen ofta saknas på en\n"
-"standardmus från Apple. Några exempel:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: detta alternativ kan användas antingen för att ladda moduler,\n"
-"innan startenheten är tillgänglig, eller för att ladda en ramdiskavbildning\n"
-"vid krissituationer.\n"
-"\n"
-" * Initrd-size: standardstorleken på ramdisken är vanligtvis 4096 byte.\n"
-"Om du behöver allokera en större ramdisk, använd detta alternativ.\n"
-"\n"
-" * Read-write: vanligtvis startar \"root\"-partitionen i skrivskyddat läge\n"
-"för att tillåta en filsystemskontroll innan systemet startar på \"riktigt"
-"\".\n"
-"Här kan du gå förbi denna funktion.\n"
-"\n"
-" * NoVideo: skulle Apple-videohårdvaran vara extra krånglig kan du välja\n"
-"detta \"novideo\"-läge, med framebuffer-stöd.\n"
-"\n"
-" * Default: vad som ska vara Linux standardalternativ, det som väljs bara\n"
-"genom att trycka Enter vid yabootprompten. Det blir också markerat med en\n"
-"\"*\" om du trycker [Tabb] för att se startalternativen."
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot är en starthanterare för NewWorld MacIntosh-hårdvara. Den kan ladda\n"
-"antingen GNU/Linux, MacOS eller MacOSX. I de flesta fall blir dessa "
-"operativ-\n"
-"system korrekt identifierade och installerade. Om så inte är fallet kan du\n"
-"lägga till dem manuellt här. Var försiktig så du väljer rätt parametrar.\n"
-"\n"
-"Yaboots huvudalternativ är:\n"
-"\n"
-" * Init Message: ett enkelt textmeddelande som visas före startprompten.\n"
-"\n"
-" * Boot Device: indikerar var du vill placera informationen som behövs\n"
-"för att starta GNU/Linux. Vanligtvis sätter man upp en \"bootstrap\"-\n"
-"partition tidigare för att lagra denna information.\n"
-"\n"
-" * Open Firmware Delay: till skillnad från LILO finns det två fördröjningar\n"
-"i yaboot. Första fördröjningen räknas i sekunder och vid detta tillfälle\n"
-"kan du välja mellan CD, OF-start, MacOS eller Linux.\n"
-"\n"
-" * Kernel Boot Timeout: denna tidsgräns motsvarar fördröjningen i LILO.\n"
-"Efter att du valt Linux kommer en fördröjning på 0.1 sekunder innan din\n"
-"förvalda kärna väljs.\n"
-"\n"
-" * Enable CD Boot?: genom att välja detta alternativ kan du välja \"C\" för\n"
-"CD vid första startprompten.\n"
-"\n"
-" * Enable OF Boot?: genom att välja detta alternativ kan du välja \"N\" för\n"
-"\"Open Firmware\" vid första startprompten.\n"
-"\n"
-"* Default OS: du kan välja vilket OS som ska starta som standard när\n"
-"\"Open Firmware\"-fördröjningen är över."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-"Här presenteras olika parametrar rörande din maskin. Beroende på\n"
-"installerad hårdvara ser du alla eller några av följande alternativ:\n"
-"\n"
-" * \"Mus\": kontrollera din muskonfiguration och om nödvändigt klicka\n"
-"på knappen för att ändra.\n"
-"\n"
-" * \"Tangentbord\": kontrollera din tangentbordsuppsättning och om\n"
-"nödvändigt klicka på knappen för att ändra.\n"
-"\n"
-" * \"Tidszon\": zoneDrakX antar vilken tidszon du har, utifrån det\n"
-"språk du har valt. Men här gäller samma sak som vid val av tangentbord,\n"
-"du kanske inte befinner dig i det land som motsvarar det språk du har valt.\n"
-"Därför kan du behöva klicka på knappen \"Tidszon\" för att konfigurera\n"
-"klockan efter din tidszon.\n"
-"\n"
-" * \"Skrivare\": om du klickar på \"Ingen skrivare\" startar skrivarguiden.\n"
-"\n"
-" * \"Ljudkort\": om ett ljudkort upptäcks i din dator visas det här.\n"
-"Ingen ändring är möjlig under installationen.\n"
-"\n"
-" * \"TV-kort\": om ett TV-kort upptäcks i din dator visas det här.\n"
-"Ingen ändring är möjlig under installationen.\n"
-"\n"
-" * \"ISDN-kort\": om ett ISDN-kort upptäcks i din dator visas det här.\n"
-"Du kan klicka på knappen för att ändra dess parametrar."
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Välj vilken hårddisk du vill radera för att kunna installera din nya\n"
-"Mandrake Linux-partition. Var försiktig, all data som för tillfället\n"
-"finns på disken kommer att gå förlorad och kommer inte att kunna återställas!"
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klicka på \"OK\" om du vill ta bort all data och alla partitioner som\n"
-"finns på denna hårddisk. Var försiktig, efter det att du klickat på \"OK\"\n"
-"kommer du inte att kunna återställa någon data eller några partitioner på\n"
-"denna hårddisk, inkluderande Windows-data.\n"
-"\n"
-"Klicka på \"Avbryt\" för att avbryta denna operation utan att förlora någon\n"
-"data eller några partitioner på denna hårddisk."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-"Kan inte komma åt kärnmoduler som motsvarar din kärna (filen %s saknas)."
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Du har valt följande server/servrar: %s\n"
-"\n"
-"\n"
-"Dessa startas automatiskt vid uppstart. De har inga kända säkerhetsproblem,\n"
-"men sådana kan upptäckas. Om så blir fallet måste du se till att uppdatera\n"
-"dem så snabbt som möjligt.\n"
-"\n"
-"\n"
-"Vill du installera dessa servrar?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kan inte använda broadcast utan NIS-domän."
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Sätt in en FAT-formaterad diskett i diskettstationen %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Denna diskett är inte FAT-formaterad"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"För att använda detta sparade paketval, starta installationen med \"linux "
-"defcfg=floppy\"."
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fel vid läsning av fil %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"En del hårdvara i din dator behöver \"proprietära\" drivrutiner för att\n"
-"fungera. Du kan hitta en del information om dem här: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Du måste ha en root-partition.\n"
-"För detta, skapa en partition (eller klicka på en befintlig).\n"
-"Välj sedan åtgärden \"monteringspunkt\" och ange den som \"/\"."
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Du måste ha en växlingspartition"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Du har ingen växlingspartition.\n"
-"\n"
-"Fortsätta ändå?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Du måste ha en FAT-partition monterad i /boot/efi."
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Använd ledigt utrymme"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Inte tillräckligt med utrymme för att allokera nya partitioner."
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Använd existerande partition"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Det finns ingen befintlig partition att använda."
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Använd Windows-partitionen för loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Vilken partition vill du använda för Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Välj storlekar"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Storleken på root-partitionen i MB: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Storleken på växlingspartitionen i MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Använd ledigt utrymme på Windows-partitionen"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Vilken partition vill du ändra storlek på?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Räknar ut gränserna för Windows filsystem"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Det gick inte att ändra storlek på din FAT-partition, \n"
-"följande fel uppstod: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Din Windows-partition är för fragmenterad, kör \"Defrag\" först."
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"VARNING!\n"
-"\n"
-"DrakX kommer nu att ändra storleken på din Windows-partition.\n"
-"Var försiktig: detta moment är riskfyllt. Om du inte redan gjort\n"
-"det, ska du först avsluta installationen och köra Scandisk i Windows\n"
-"(och möjligtvis även Defrag), starta sedan installationen på nytt.\n"
-"Du bör också säkerhetskopiera dina data.\n"
-"När du är säker, klicka Ok."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Vilken storlek vill du behålla för Windows på"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "partition %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT-storleksändring misslyckades: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Det finns ingen FAT-partition att ändra storlek på eller använda som "
-"loopback (eller ej tillräckligt utrymme)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Rensa hela hårddisken"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Ta bort Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Du har mer än en hårddisk, vilken vill du installera Linux på?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Alla existerande partitioner på %s och dess data kommer att gå förlorade."
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Anpassad diskpartitionering"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Använd fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Du kan nu partitionera %s.\n"
-"Glöm inte att spara med \"w\" när du är klar."
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Du har inte tillräckligt med utrymme på din Windows-partition."
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Jag kan inte hitta utrymme för installation."
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakXs partitioneringsguide hittade följande lösningar:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partitionering misslyckades: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Startar nätverket"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Stoppar nätverket"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ett fel uppstod och jag vet inte hur det kan hanteras på ett\n"
-"bra sätt. Fortsätt på egen risk."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplicera monteringspunkt %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Några viktiga paket blev inte installerade ordentligt.\n"
-"Antingen är din CD-romenhet eller din CD-skiva trasig.\n"
-"Du kan kontrollera CD-skivan på en redan installerad\n"
-"Mandrake Linux-dator med kommandot \"rpm -qpl Mandrake/RPMS/*.rpm\".\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Välkommen till %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Ingen diskettstation tillgänglig"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Påbörjar steg \"%s\"\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Välj storlek du vill installera:"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Total storlek: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Version: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Storlek: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Välj paketen som du vill installera"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Information"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Installera"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Installerar"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Var god vänta, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Återstående tid "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Total tid "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Förbereder installation"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Installerar paketet %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Fortsätta ändå?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Det uppstod ett fel vid sortering av paket:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Använd existerande konfiguration för X11?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Ditt system har ont om resurser. Du kan få problem med att installera\n"
-"Mandrake Linux. Om det blir problem kan du prova den textbaserade\n"
-"installationen istället. För att göra det tryck F1 när du startar\n"
-"från CD-skivan, skriv sedan \"text\"."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Installationsklass"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Välj en av de följande installationsklasserna:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Den totala storleken för de grupper du har valt är ungefär %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Om du vill installera mindre än detta, välj då hur stor del av\n"
-"paketen du vill installera. Vid en låg andel kommer endast de\n"
-"viktigaste paketen att installeras. Om du väljer 100%%, kommer alla\n"
-"valda paket att installeras."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Endast %d%% av de valda paketen får plats på din hårddisk.\n"
-"Om du vill installera mindre än detta, välj då hur stor del av\n"
-"paketen du vill installera. Vid en låg andel kommer endast de\n"
-"viktigaste paketen att installeras. Om du väljer %d%%, kommer så\n"
-"många paket som möjligt att installeras."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-"Du kommer att få välja exakt vilka paket som ska installeras i nästa steg."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Andel (i procent) av paketen som ska installeras"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Val av paketgrupper"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Välj enskilda paket"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Total storlek: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Ogiltigt paket"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Namn: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Betydelsegrad: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Du kan inte välja detta paket eftersom det inte finns tillräckligt med "
-"utrymme."
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Följande paket kommer att installeras"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Följande paket kommer att tas bort"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Du kan inte välja/välja bort detta paket."
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Detta är ett obligatoriskt paket som inte kan väljas bort."
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Du kan inte välja bort detta paket. Det är redan installerat."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Detta paketet måste uppdateras.\n"
-"Är du säker på att du vill välja bort det?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Du kan inte välja bort det här paketet. Det måste uppdateras."
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Visa automatiskt valda paket"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Ladda/spara på diskett"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "Uppdaterar paketval"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "Minimal installation"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Uppskattar"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Vänta, förbereder installation"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d paket"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Varning\n"
-"\n"
-"Läs reglerna nedan noga. Om du inte godkänner dem, får du\n"
-"inte installera program från nästa CD. Klicka på \"Vägrar\" för att\n"
-"fortsätta installationen utan programmen från nästa CD.\n"
-"\n"
-"\n"
-"Några av komponenterna på nästa CD är inte licensierade under GPL\n"
-"eller någon liknande licens. Varje sådan komponent är i stället\n"
-"licensierad under sitt eget licensavtal. Läs och godkänn varje\n"
-"enskild sådan licens före användning eller distribuering av dessa\n"
-"komponenter. De flesta av dessa licenser förbjuder överföring,\n"
-"kopiering (utom för backupendamål), distribuering samt modifiering av\n"
-"komponenten. Alla brott mot reglerna under någon av dessa licenser,\n"
-"förverkar omedelbart dina rättigheter under licensen i fråga. Utom i\n"
-"de fall licensen för en komponent uttryckligen ger dig den rättigheten,\n"
-"får du inte installera komponenten på mer än ett system, eller för\n"
-"användning på ett nätverk. Om du är osäker, kontakta\n"
-"tillverkaren av komponenten i fråga. Kopiering till tredje part av\n"
-"sådana komponenter, inkluderat deras dokumentation, är normalt sett\n"
-"förbjuden.\n"
-"\n"
-"\n"
-"Alla rättigheter till komponenterna på nästa CD tillhör deras\n"
-"respektive upphovsmän, och är skyddade av\n"
-"imaterialrätt/copyright-lagstiftning som kan appliceras på mjukvara.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Accepterar"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Vägrar"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Byt CD-skiva!\n"
-"\n"
-"Sätt in CD-skivan med namn \"%s\" och klicka på \"Ok\".\n"
-"Om du inte har den, klicka på \"Avbryt\" för att hoppa över\n"
-"den delen av installationen."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Det uppstod ett fel vid installation av paketen:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Ett fel inträffade"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Licensavtal"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Detta är en inofficiell översättning av licensavtalet för\n"
-"Linux Mandrake. Denna text bestämmer inte reglerna för mjukvara i\n"
-"denna distribution - endast den franska originaltexten för\n"
-"Linux Mandrake-licensen gör det. Denna text tillhandahålls för att\n"
-"hjälpa dig som svensktalande att förstå licensen bättre.\n"
-"\n"
-"\n"
-"Introduktion\n"
-"\n"
-" Hädanefter avses med beteckningen \"Mjukvaruprodukter\",\n"
-"operativsystemet, samt de olika komponenter som ingår i\n"
-"Mandrake Linux-distributionen. Mjukvaruprodukterna inkluderar, men är\n"
-"inte begränsade till, programmen, metoderna, reglerna och\n"
-"dokumentationen relaterade till operativsystemet och de olika\n"
-"komponenterna i Mandrake Linux-distributionen.\n"
-"\n"
-"\n"
-"1. Licens\n"
-"\n"
-" Läs denna text noggrant. Den är en licensavtal mellan dig\n"
-"och MandrakeSoft S.A., gällande mjukvaruprodukterna. Genom att\n"
-"installera, kopiera, eller använda mjukvaruprodukterna på något sätt,\n"
-"accepterar du detta avtal, och godkänner att rätta dig efter dess\n"
-"regler.\n"
-" Genom att installera, kopiera eller använda mjukvaruprodukterna på\n"
-"något sätt som inte tillåts enligt detta avtal, har du brutit avtalet,\n"
-"som då upphör, och därigenom förverkat alla de rättigheter det ger\n"
-"dig. Skulle avtalet upphöra, måste du omedelbart förstöra alla kopior\n"
-"av mjukvaruprodukten.\n"
-"\n"
-"\n"
-"2. Begränsad garanti\n"
-"\n"
-" Mjukvaruprodukten och medföljande dokumentation tillhandahålls \"som\n"
-"den är\", utan någon som helst garanti, endast begränsat av vad lagen\n"
-"kräver. MandrakeSoft S.A. skall, under inga omständigheter, till den\n"
-"grad lagen tillåter det, hållas ansvariga för olycks-, direkt eller\n"
-"indirekt skada (bland annat, men inte begränsat till, minskad\n"
-"försäljning, drifts-/affärs-avbrott, finansiella förluster,\n"
-"rättsavgifter och böter i en rättsprocess mot er, eller några andra\n"
-"därav följande förluster) som orsakats av användandet, eller oförmågan\n"
-"att använda mjukvaruprodukten, även om MandrakeSoft S.A. skulle ha\n"
-"vetskap möjligheten av en sådan händelse.\n"
-"\n"
-"BEGRÄNSAT ANSVAR GÄLLANDE ÄGANDET ELLER ANVÄNDANDET AV PROGRAMVARA FÖRBJUDEN "
-"I VISSA LÄNDER\n"
-"\n"
-" MandrakeSoft S.A. skall, under inga omständigheter, till den grad\n"
-"lagen tillåter det, hållas ansvariga för olycks-, direkt eller\n"
-"indirekt skada (bland annat, men inte begränsat till, minskad\n"
-"försäljning, drifts-/affärs-avbrott, finansiella förluster,\n"
-"rättsavgifter och böter i en rättsprocess mot er, eller några andra\n"
-"därav följande förluster) som orsakats av ägandet, användandet eller\n"
-"nedladdandet, från någon av Mandrake Linuxs siter, av\n"
-"mjukvarukomponenter som är förbjudna eller begränsade av landets\n"
-"lagar. Detta begränsade ansvar gäller bland annat, men är inte\n"
-"begränsat till, det kryptografiska mjukvarukomponenter som ingår i\n"
-"Mjukvaruprodukten.\n"
-"\n"
-"\n"
-"3. GPL och relaterade licenser\n"
-"\n"
-" Mjukvaruprodukten består av komponenter med olika upphovsmän (fysiska\n"
-"eller juridiska). De flesta av dessa komponenter distribueras under\n"
-"The GNU General Public License, hädanefter kallad \"GPL\", eller\n"
-"liknande licenser. De flesta av dessa licenser tillåter dig att\n"
-"använda, kopiera, ändra och distribuera de licensierade\n"
-"komponenterna. Läs avtalet för varje enskild komponent noga\n"
-"innan ni använder komponenten i fråga. Varje fråga angående licensen\n"
-"för en given komponent skall ställas till komponentens upphovsman,\n"
-"inte till MandrakeSoft S.A.\n"
-" Program skrivna av MandrakeSoft S.A. distribueras under GPL.\n"
-" Dokumentation skriven av MandrakeSoft S.A. distribueras under en\n"
-"speciell licens. Se dokumentationen för detaljer.\n"
-"\n"
-"\n"
-"4. Upphovsrätt\n"
-"\n"
-" Alla rättigheter till Mjukvaruproduktens komponenter tillhör deras\n"
-"respektive upphovsmän och är skyddade av\n"
-"immaterialrätt/copyrightlagstiftning som kan appliceras på mjukvara.\n"
-" MandrakeSoft S.A. har rätt att ändra mjukvaruprodukten, helt eller\n"
-"delvis, på alla sätt och för alla ändamål.\n"
-" \"Mandrake\", \"Mandrake Linux\" och associerade logotyper är\n"
-"registrerade varumärken tillhörande MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. Lagar\n"
-"\n"
-" Skulle någon del av detta avtal hållas olagligt, icke applicerbart\n"
-"eller ogiltigt av domstol, skall denna del exkluderas från avtalet. Ni\n"
-"fortsätter då att vara bunden av de återstående delarna av detta\n"
-"avtal.\n"
-" Detta avtals regler regleras av Frankrikes lagar.\n"
-" Alla stridigheter över reglerna i detta avtal skall i första hand\n"
-"göras upp utom domstol, och om detta ej är möjligt, inom en domstol i\n"
-"Paris, Frankrike.\n"
-" För alla frågor rörande denna text, kontakta MandrakeSoft\n"
-"S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tangentbord"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Välj din tangentbordslayout."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Här är hela listan med olika tangentbord"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Vilken installationsklass vill du använda?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Installera/Uppdatera"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Är detta en installation eller en uppdatering?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Rekommenderad"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Uppdatera"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Välj din mustyp."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Musport"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Välj vilken serieport din mus är kopplad till."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Knappemulering"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Knapp 2-emulering"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Knapp 3-emulering"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurerar PCMCIA-kort..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Konfigurerar IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "inga tillgängliga partitioner"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Söker av partitioner för att finna monteringspunkter"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Välj monteringspunkter"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Din partitionstabell kan inte läsas - den är alldeles för trasig.\n"
-"Jag kan gå vidare genom att rensa dåliga partitioner (ALL DATA försvinner!)\n"
-"Den andra lösningen är att förhindra DrakX från att ändra "
-"partitionstabellen.\n"
-"(felet är %s)\n"
-"\n"
-"Accepterar du att förlora alla partitioner?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Diskdrake misslyckades med att läsa din partitionstabell.\n"
-"Fortsätt på egen risk!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Inget ledigt utrymme för 1MB bootstrap! Installationen fortsätter, men för "
-"att starta ditt system måste du skapa en \"bootstrap\"-partition i Diskdrake."
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "Ingen root-partition hittades för uppdatering."
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Root-partition"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Vad är root-partitionen (/) i ditt system?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Du behöver starta om datorn för att ändringarna i partitionstabellen ska "
-"aktiveras."
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Välj de partitioner du vill formatera"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Sök efter felaktiga block?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Formaterar partitioner"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Skapar och formaterar filen %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Ej tillräckligt med växlingsutrymme för att genomföra installationen, lägg "
-"till mer."
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Söker efter tillgängliga paket"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Söker efter paket att uppdatera"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Ditt system har inte tillräckligt med utrymme för installation eller "
-"uppdatering (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Fullständig (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimal (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Rekommenderad (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Anpassad"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Välj ladda eller spara paketval på diskett.\n"
-"Formatet är detsamma som för auto_install-genererade disketter."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Ladda från diskett"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Laddar från diskett"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Paketval"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "Sätt in en diskett som innehåller ditt paketval"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Spara på diskett"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Vald storlek är större än tillgängligt utrymme."
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Om du har alla CD-skivorna i listan ovan, välj \"Ok\".\n"
-"Om du inte har någon av dem, välj \"Avbryt\".\n"
-"Om du bara har några av dem, se till att bara\n"
-"de du har är valda, välj sedan \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-rom med etiketten \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installerar paket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Efter-installationskonfigurering"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Sätt in aktuell startdiskett i diskettstationen %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Sätt in disketten med uppdaterade moduler i diskettstationen %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Du har nu möjlighet att ladda hem mjukvara för kryptering.\n"
-"\n"
-"VARNING:\n"
-"\n"
-"Beroende på olika allmänna krav tillämpningsbara på denna mjukvara och "
-"ålagda\n"
-"av olika jurisdiktioner, ska kund och/eller slutanvändare försäkra sig om "
-"att\n"
-"lagar i hennes/deras jurisdiktion tillåter henne/dem att ladda ner, lagra "
-"och/eller\n"
-"använda denna mjukvara.\n"
-"\n"
-"Dessutom ska kund och/eller slutanvändare vara extra uppmärksamma på att "
-"inte\n"
-"överträda lagar i hennes/deras jurisdiktion. Skulle kund och/eller "
-"slutanvändare inte\n"
-"respektera villkoren i dessa tillämpningsbara lagar, kommer hon/dem att ådra "
-"sig\n"
-"allvarliga sanktioner.\n"
-"\n"
-"Inte under några omständigheter ska Mandraksoft eller dess tillverkare och/"
-"eller\n"
-"leverantörer anses ansvariga för speciell, indirekt eller oförutsedd skada "
-"(inkluderat,\n"
-"men inte begränsat till förlorad inkomst, avbrott i affär, förlust av "
-"kommersiell data och\n"
-"andra pekuniära förluster och eventuellt påföljande skadestånd och kostnader "
-"i\n"
-"samband med dom i domstol) uppkomna ur användning, innehav, eller enbart\n"
-"nerladdning av denna mjukvara som kund och/eller slutanvändare kan få "
-"tillgång\n"
-"till efter att accepterat det aktuella avtalet.\n"
-"\n"
-"\n"
-"För ev. frågor relaterade till dessa avtal, kontakta \n"
-"Mandrakesoft, Inc. \n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Välj en webbplats från vilken du vill hämta paketen"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Kontaktar webbplatsen för en lista över tillgängliga paket"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Välj paketen du vill installera"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Vilken är din tidszon?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "Hårdvaruklocka ställd till GMT"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatisk tidsynkronisering (med NTP)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "NTP-server"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "CUPS-fjärrserver"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Ingen skrivare"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Sammanfattning"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Mus"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Tidszon"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Skrivare"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDN-kort"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Ljudkort"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV-kort"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Lokala filer"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Ange root-lösenord"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Inget lösenord"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Lösenordet är för enkelt (det måste vara minst %d tecken långt)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Autentisering"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "LDAP-autentisering"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP Base DN"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "LDAP-server"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "NIS-autentisering"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS-domän"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS-server"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"En anpassad startdiskett skapar ett sätt att starta ditt Linux-system utan\n"
-"att vara beroende av den normala starthanteraren. Det är användbart om du "
-"inte\n"
-"vill installera SILO på ditt system, eller om något annat operativsystem "
-"raderar SILO\n"
-"eller om SILO inte fungerar med din hårdvara. En anpassad startdiskett kan "
-"också\n"
-"användas i kombination med Mandrakes återskapningsavbild, vilket gör "
-"räddning\n"
-"av ett trasigt system mycket enklare.\n"
-"\n"
-"Om du vill skapa en startdiskett för ditt system, sätt in en disk i första "
-"diskett-\n"
-"stationen och klicka \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Första diskettstationen"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Andra diskettstationen"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Hoppa över"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"En anpassad startdiskett skapar ett sätt att starta ditt Linux-system utan\n"
-"att vara beroende av den normala starthanteraren. Det är användbart om du\n"
-"inte vill installera LILO (eller grub) på ditt system, eller om något annat\n"
-"operativsystem raderar LILO eller om LILO inte fungerar med din hårdvara.\n"
-"En anpassad startdiskett kan också användas i kombination med Mandrakes\n"
-"återskapningsavbild, vilket gör återställningen av ett trasigt system "
-"mycket\n"
-"enklare. Vill du skapa en startdiskett för ditt system?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Ingen diskettstation hittades"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Välj den diskettstation du vill använda för att skapa startdisketten"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Sätt in en tom diskett i diskettstationen %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Skapar startdiskett"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Förbereder starthanterare"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Du verkar ha en OldWorld eller okänd\n"
-" maskin, yaboot-starthanteraren kommer inte att fungera.\n"
-"Installationen fortsätter, men du behöver\n"
-" använda BootX för att starta din dator."
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Vill du använda aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fel vid installationen av aboot.\n"
-"Vill du försöka ändå, fast det kan förstöra partitionen?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-msgid "Installing bootloader"
-msgstr "Installerar starthanterare"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Installation av starthanteraren misslyckades. Följande fel uppstod:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Du behöver eventuellt ändra din Open Firmware-startenhet för att\n"
-" aktivera starthanteraren. Om du inte ser starthanterarprompten vid\n"
-" omstart, håll ner Command-Option-O-F under uppstart och skriv:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Skriv sedan: shut-down\n"
-"Vid nästa uppstart bör du se starthanterarprompten."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Låg"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Mellan"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Hög"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Välj säkerhetsnivå"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Sätt in en tom diskett i diskettenhet %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Skapar automatisk installationsdiskett"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Några steg är inte slutförda.\n"
-"\n"
-"Vill du verkligen avbryta nu?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratulerar, installationen är färdig!\n"
-"Ta ur diskett och/eller CD-skiva och tryck på Enter för omstart.\n"
-"\n"
-"För information om uppdateringar besök http://www.mandrakelinux.com/.\n"
-"\n"
-"Se kapitlet \"post install\" i \"Official Mandrake Linux User's Guide\"\n"
-"för ytterligare information."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Genererar automatisk installationsdiskett"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Automatisk installation kan göras helt automatisk, om så önskas,\n"
-"vilket gör att den tar över hårddisken!\n"
-"(syftet är att installera på en annan dator).\n"
-"\n"
-"Du kan tänkas vilja köra samma installation i repris.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Automatiserad"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Repris"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Spara paketval"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux installation %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> mellan element    | <Space> väljer  | <F12> nästa skärm "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu saknas"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "Välj en fil"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Avancerad"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Var god vänta"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Expandera träd"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Komprimera träd"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Byt mellan rak och gruppvis sortering"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Tvetydighet (%s), var mer exakt.\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Fel val, försök igen.\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (standard %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ditt val? (standard %s)"
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Ditt val? (standard %s, ange \"none\" för ingen alls.) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Tjeckiskt (QWERTZ)"
-
-# Noteraatt de tidigare namnen, med a på slutet (t.ex. svenska) angav
-# plural. Men vad jag vet anges alltid tangentbordslaouter i singular
-# (Svenskt tangentbord, inte svenska tangentbord).
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Tyskt"
-
-# Noteraatt de tidigare namnen, med a på slutet (t.ex. svenska) angav
-# plural. Men vad jag vet anges alltid tangentbordslaouter i singular
-# (Svenskt tangentbord, inte svenska tangentbord).
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Spanskt"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Finskt"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Franskt"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norskt"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Polskt"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Ryskt"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Svenskt"
-
-# Noteraatt de tidigare namnen, med a på slutet (t.ex. svenska) angav
-# plural. Men vad jag vet anges alltid tangentbordslaouter i singular
-# (Svenskt tangentbord, inte svenska tangentbord).
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Engelskt (UK)"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "Engelskt (US)"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Albanskt"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armeniskt (gammal)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armenskt (typewriter)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armeniskt (fonetiskt)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latin)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belgiskt"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulgariskt"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilianskt"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Vitryskt"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Schweiziskt (Tysk uppsättning)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Schweiziskt (Fransk uppsättning)"
-
-# Noteraatt de tidigare namnen, med a på slutet (t.ex. svenska) angav
-# plural. Men vad jag vet anges alltid tangentbordslaouter i singular
-# (Svenskt tangentbord, inte svenska tangentbord).
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Tjeckiskt (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Tyskt (Inga döda tangenter)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Danskt"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norskt)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estniskt"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiskt (\"Rysk\" uppsättning)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiskt (\"Latinsk\" uppsättning)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Grekiskt"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Ungerskt"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Kroatiskt"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Israeliskt"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Islaeliskt (Fonetiskt)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iranskt"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Isländskt"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Italienskt"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japanskt 106 tangenter"
-
-# Noteraatt de tidigare namnen, med a på slutet (t.ex. svenska) angav
-# plural. Men vad jag vet anges alltid tangentbordslaouter i singular
-# (Svenskt tangentbord, inte svenska tangentbord).
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Koreanskt"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latinamerikanskt"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litauiskt AZERTY (gamalt)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litauiskt AZERTY (nytt)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litauiskt \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litauiskt \"phonetic\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-msgid "Latvian"
-msgstr "Lettisk"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Makedoniskt"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Holländskt"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Polskt (querty-layout)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Polskt (qwertz-layout)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portugisiskt"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Kanadensiskt"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Rumänskt (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Rumänskt (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Ryskt (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Slovenskt"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakiskt (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakiskt (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "Serbiskt (cyrillic)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Thailändskt"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr "Tajik"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turkiskt (traditionell \"F\"-modell)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turkisk (modern \"Q\"-modell)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukrainskt"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "Amerikanskt (internationellt)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Litauiskt \"nummerisk rad\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslaviskt (latinsk)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cirkulära monteringar %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Ta bort de logiska enheterna först\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mus"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Standard PS2 hjulmus"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1-knappars"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Generisk"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Hjul"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "seriell"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Standard 2-knapparsmus"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Standard 3-knapparsmus"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serial, gammal C7 typ)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "bussmus"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2-knappars"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3-knappars"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "ingen"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Ingen mus"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Testa musen"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "För att aktivera musen,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "SNURRA PÅ HJULET!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Slutför"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Nästa ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Föregående"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Är detta korrekt?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Anslut till Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Det vanligaste sättet att koppla upp med adsl är pppoe.\n"
-"En del anslutningar använder pptp och några få använder dhcp.\n"
-"Om du är osäker, välj \"pppoe\"."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "använd dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "använd pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "använd pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Vilken dhcp-klient vill du använda?\n"
-"Standardalternativet är dhcpcd."
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ingen ethernet-nätverkkort har hittats i ditt system.\n"
-"Jag kan inte installera denna nätverkstyp."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Välj nätverksgränssnitt"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Välj vilken nätverkskort du vill använda för anslutning till Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "inget nätverkskort kunde hittas"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Konfigurera nätverket"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Ange ditt datornamn om du vet det.\n"
-"En del DHCP-servrar kräver att din dator har ett namn för att fungera.\n"
-"Ditt datornamn ska skrivas inklusive domännamn,\n"
-"t ex som \"mindator.mittlab.mittforetag.se\"."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Värddatornamn"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Guiden för nätverkskonfiguration"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Externt ISDN-modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Internt ISDN-kort"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Vad för slags ISDN-anslutning har du?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Vilken ISDN-konfiguration föredrar du?\n"
-"\n"
-"* Den äldre varianten använder isdn4net. Den har kraftfulla verktyg,\n"
-"  men är svår att konfigurera för nybörjare och är inte standard.\n"
-"\n"
-"* Den nya varianten är lättare att förstå, mer standard, men har\n"
-"  färre verktyg.\n"
-"\n"
-"Vi rekommenderar isdn-light.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Ny konfiguration (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Äldre konfiguration (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN-konfiguration"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Välj din leverantör.\n"
-" Om den saknas i listan, välj \"Unlisted\""
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "Protokoll för Europa"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "Protokoll för Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "Protokoll för resten av världen"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokoll för resten av världen \n"
-" ingen D-kanal (hyrd lina)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Vilket protokoll vill du använda?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Vilket typ av kort har du?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Vet ej"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Om du har ett ISA-kort bör värdena på nästa skärm vara korrekta.\n"
-"\n"
-"Om du har ett PCMCIA-kort måste du veta IRQ och IO för ditt kort.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Avbryt"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Fortsätt"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Vilket är ditt ISDN-kort?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Jag har hittat ett ISDN PCI-kort, men känner inte till modellen. Välj ett av "
-"PCI-korten på nästa skärm."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Inget ISDN PCI-kort hittat. Välj ett på nästa skärm."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Ange vilken serieport ditt modem är anslutet till:"
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Uppringningsalternativ"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Namn på anslutningen"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Telefonnummer"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Användar-ID"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Skriptbaserad"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Terminalbaserad"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Domännamn"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Primär DNS-server (frivilligt)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Sekundär DNS-server (frivilligt)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan koppla ifrån eller konfigurera om din anslutning."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan konfigurera om din anslutning."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Du är för närvarande ansluten till Internet."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan koppla upp mot Internet eller konfigurera om din anslutning."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Du är inte ansluten till Internet för närvarande."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Koppla upp mot Internet"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Koppla ner från Internet"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Konfigurera nätverkskopplingen (LAN eller Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Internetanslutning & konfiguration"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Vi kommer nu att anpassa anslutning %s."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Vi kommer nu att konfigurera anslutning %s.\n"
-"\n"
-"\n"
-"Klicka \"OK\" för att börja."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Konfigurera nätverk"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Eftersom du gör en nätverksinstallation är ditt nätverk redan konfigurerat.\n"
-"Klicka på Ok för att behålla din konfiguration, eller avbryt för att "
-"konfigurera om din Internet- & nätverksanslutning.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Välkommen till guiden för nätverksinstallation.\n"
-"\n"
-"Vi kommer att konfigurera din Internet/nätverksanslutning.\n"
-"Om du inte vill använda hitta automatiskt, klicka bort markeringen.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Välj profil att konfigurera"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Använd hitta automatiskt"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Letar efter enheter..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Normal modemuppkoppling"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "hittad på port %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN-uppkoppling"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "hittade %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ADSL-anslutning"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "hittad på gränssnitt %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Anslutning med kabelmodem"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "kabel-anslutning har hittats"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "LAN-anslutning"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "ethernet-kort har hittats"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Välj den anslutning du vill konfigurera"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Du har konfigurerat flera sätt att ansluta till Internet.\n"
-"Välj den du vill använda.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Internet-anslutning"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Vill du starta din anslutning vid uppstart?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Nätverkskonfiguration"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr "Nätverket måste startas om"
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Ett fel uppstod när nätverket skulle startas om: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Gratulerar, nätverks- och Internetkonfigurationen är klar.\n"
-"\n"
-"Konfigurationen kommer nu att läggas in i ditt system.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"När det är klart rekommenderas du att starta om din X-miljö\n"
-"för att undvika problem vid byte av värddatornamn."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"VARNING: Denna enhet har tidigare varit konfigurerad för att koppla upp mot "
-"Internet.\n"
-"Genom att acceptera behåller den sin konfiguration.\n"
-"Modifiering av fälten nedan åsidosätter denna konfiguration."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Skriv in IP-konfigurationen för den här datorn.\n"
-"Varje adress skall skrivas som en så kallad\n"
-"dotted-quad (t.ex. 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurera nätverksenhet %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (drivrutin %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP-adress"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Nätmask"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Dynamisk IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adressen ska vara i formatet 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Skriv in domännamn och datornamn.\n"
-"Datornamnet skall vara ett fulltständigt datornamn,\n"
-"t ex \"mindator.mindoman.se\".Du kan också ange IP-adressen\n"
-"till en gateway om du har en sådan. Om du inte har någon gateway,\n"
-"lämna dessa fält tomma."
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS-server"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Gateway-enhet"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Proxy-konfiguration"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP-proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP-proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr "Spåra nätverkskortets id (användbart för bärbara datorer)"
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Proxy ska vara http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Proxy ska vara ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Internetkonfiguration"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Vill du ansluta till Internet nu?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Testar din anslutning..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Systemet är nu anslutet till Internet."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Av säkerhetsskäl kommer den att kopplas ner nu."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Systemet verkar inte vara anslutet till Internet.\n"
-"Prova att konfigurera om din anslutning."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Anslutningskonfiguration"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Fyll i, eller kontrollera, fältet nedan"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "Kortets IRQ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Kortets minne (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "Kortets IO"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "Kortets IO_0"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "Kortets IO_1"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Ditt personliga telefonnummer"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Leverantörens namn (t ex leverantor.se)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Leverantörens telefonnummer"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "Leverantörens dns 1 (frivilligt)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "Leverantörens dns 2 (frivilligt)"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "Välj ditt land"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Uppringningsmetod"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Anslutningshastighet"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "Anslutningens tidsgräns (i sek)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Kontoinloggning (användarnamn)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Kontolösenord"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Utökade partitioner stöds inte på den här plattformen."
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Du har en lucka i din partitionstabell, men den kan inte användas.\n"
-"Den enda lösningen är att du flyttar din primära partition,\n"
-"så att den ligger bredvid den utökade partitionen."
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Återställning från fil %s misslyckades: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Trasig återställningsfil"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Kunde inte skriva till fil %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Det händer något dåligt med din disk. \n"
-"Ett integritetstest av data har misslyckats. \n"
-"Det betyder att skrivning till disken medför allmänt skräp."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "nödvändigt"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "viktigt"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "väldigt trevligt"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "trevligt"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "tveksamt"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - \"Print, Don't Queue\""
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Lokal skrivare"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Nätverksskrivare"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "Skrivare på CUPS-fjärrserver"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "Skrivare på lpd-fjärrserver"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Nätverksskrivare (socket)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Skrivare på SMB/Windows-server"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "Skrivare på Netware-server"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "Ange URI för skrivarenhet"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "Skicka jobbet till kommando"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "Okänd modell"
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr "Rå skrivare (ingen drivrutin)"
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(på %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "(på den här maskinen)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Välj skrivaranslutning"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hur är skrivaren ansluten?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"Skrivare på CUPS-fjärrservrar behöver du inte konfigurera\n"
-"här; de kommer att hittas automatiskt. Om du ändå\n"
-"vill konfigurera, välj \"Skrivare på CUPS-fjärrserver\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Ingen"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-msgid "Choose a default printer!"
-msgstr "Välj en standardskrivare!"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-"Med en CUPS-fjärrserver behöver du inte konfigurera någon \n"
-"skrivare här; CUPS-servrar informerar din maskin automatiskt\n"
-"om dess skrivare. Alla skrivare som din maskin känner till\n"
-"för tillfället visas i fältet \"Standardskrivare\".\n"
-"Välj standardskrivaren för din maskin där och klicka\n"
-"på knappen \"Verkställ/Läs som skrivare\". Klicka på samma knapp för\n"
-"att uppdatera listan (det kan ta upp till 30 sekunder från start av\n"
-"CUPS till alla fjärrskrivare syns).\n"
-"När din CUPS-server är i ett annat nätverk, måste du \n"
-"fylla i CUPS-servers IP-adress (och om du vill; portnummret),\n"
-"för att få skrivarinformation från servern.\n"
-"Lämna de här fälten tomma annars."
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalt sätt så konfigureras CUPS automatiskt enligt din\n"
-"nätverksmiljö, så att du kan komma åt skrivarna på\n"
-"CUPS-servrarna i ditt lokala nätverk. Om det här inte fungerar, \n"
-"stäng av \"Automatisk konfiguration av CUPS\" och redigera filen\n"
-"/etc/cups/cupsd.conf manuellt. Glöm inte att starta om CUPS\n"
-"efter ändringarna (kommando: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Stäng"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "Verkställ/läs om skrivare"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-adressen ska vara i formatet 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "Portnumret måste vara ett heltal!"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "Standardskrivare"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "CUPS-serverns IP"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr "Automatisk konfiguration av CUPS"
-
-#: ../../printerdrake.pm_.c:217
-msgid "Detecting devices ..."
-msgstr "Letar efter enheter..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Testar portar"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "En skrivare, modell \"%s\", har hittats på "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Lokal skrivare"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Vilken enhet är skrivaren kopplad till?\n"
-"(observera att /dev/lp0 är samma som LPT1:)\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Skrivarenhet"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "Enhet eller filnamn saknas!"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-msgid "Reading printer database ..."
-msgstr "Läser skrivardatabas..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Alternativ för lpd-skrivare"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"För att använda en lpd-utskriftskö måste du ange\n"
-"skrivarserverns värddatornamn och vad skrivarkön heter\n"
-"på den servern."
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "Fjärrvärddatornamn"
-
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "Fjärrskrivarnamn"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "Namn på fjärrvärddatorn saknas!"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "Namn på fjärrvärddatorn saknas!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB-skrivarinställningar (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"För att skriva ut på en SMB-skrivare ska du uppge SMB-värddatornamnet\n"
-"(detta är inte alltid samma som DNS-namnet) och om möjligt\n"
-"IP-adressen till skrivarservern. Även utdelningsnamnet för skrivaren\n"
-"du vill ha tillgång till och användarnamn med lösenord."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "SMB-servervärddator"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "SMB-serverns IP-adress"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Namn på utdelad volym"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Arbetsgrupp"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Du måste ange antingen serverns namn eller serverns IP-nummer!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "Namn på Samba-utdelning saknas!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "Skrivarinställningar för Netware"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"För att skriva ut på en Netware-skrivare ska du uppge\n"
-"Netware-skrivarnamnet (detta är inte alltid samma som DNS-namnet)\n"
-"såväl som namnet till skrivarkön för den skrivare du vill ha\n"
-"tillgång till. Du måste även uppge eventuella användarnamn med lösenord."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Skrivarserver"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Skrivarkönamn"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "Namn på NCP-server saknas!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "Namn på NCP-kö saknas!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Alternativ för socketskrivare"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"För att skriva till en socket-skrivare behöver du ange\n"
-"värddatornamnet för skrivaren och eventuellt också portnummret.\n"
-"På HP JetDirect-servrar är portnumret vanligtvis 9100, på andra\n"
-"servrar kan det variera. Se manualen för din hårdvara."
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "Skrivarvärddatornamn"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "Namn på skrivarvärddatorn saknas!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Skrivarenhetens URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Du kan ange URI för att komma åt skrivaren direkt. URI:n måste uppfylla "
-"antingen CUPS eller Foomatics specifikationer. Inte alla URI-typer stöds av "
-"alla utskriftshanterare."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "En giltig URI måste anges!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Varje skrivare behöver ett namn (exempelvis lp).\n"
-"Beskrivning och plats behöver inte fyllas i. De är\n"
-"kommentarer för användarna."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Skrivarens namn"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Beskrivning"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Placering"
-
-#: ../../printerdrake.pm_.c:701
-msgid "Preparing printer database ..."
-msgstr "Förbereder skrivardatabas..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "Val av skrivarmodell"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "Vilken skrivarmodell har du?"
-
-#: ../../printerdrake.pm_.c:866
-msgid "OKI winprinter configuration"
-msgstr "Konfiguration av OKI winprinter"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-"Du konfigurerar en OKI laser winprinter. Dessa skrivare\n"
-"använder ett väldigt speciellt kommunikationsprotokoll och\n"
-"fungerar därför bara när de är anslutna till den första\n"
-"parallellporten. När din skrivare är ansluten till en annan\n"
-"port eller till en skrivarserver, anslut skrivaren till den\n"
-"första parallellporten innan du skriver ut en testsida.\n"
-"Annars kommer skrivaren inte att fungera. Dina inställningar\n"
-"för anslutningstyp kommer att ignoreras av drivrutinen."
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-msgid "Lexmark inkjet configuration"
-msgstr "Konfiguration av Lexmark inkjet"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-"Drivrutinerna för inkjet som tillhandahålls av Lexmark stödjer\n"
-"endast lokala skrivare, inga skrivare på fjärrdatorer eller\n"
-"skrivarservrar. Anslut din skrivare till en lokal port eller\n"
-"konfigurera den på maskinen till vilken den är ansluten."
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"Standardinställningar för skrivare\n"
-"Du bör se till att sidstorleken och\n"
-"ink-typen (om tillgänglig) är inställda ordentligt.\n"
-"Observera att med en väldigt hög utskriftskvalitet kan\n"
-"utskrifterna ta längre tid."
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Alternativet %s måste vara ett heltal!"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Alternativet %s måste vara ett nummer!"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Alternativet %s är utanför området!"
-
-#: ../../printerdrake.pm_.c:1136
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Vill du använda skrivaren \"%s\"\n"
-"som standardskrivare?"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "Testsidor"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"Välj de testsidor du vill skriva ut.\n"
-"Observera: fototestsidan kan ta ganska lång tid att få utskriven\n"
-"och på laserskrivare med för lite minne går det inte alls.\n"
-"I de flesta fall räcker det med att skriva ut standardtestsidan."
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "Inga testsidor"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "Skriv ut"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "Standardtestsida"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr "Alternativ testsida (Letter)"
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr "Alternativ testsida (A4)"
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "Fototestsida"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Skriver ut testsida..."
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testsidan har skickats till skrivaren.\n"
-"Det kan ta lite tid innan skrivaren startar.\n"
-"Skrivarens status:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testsidan har skickats till skrivaren.\n"
-"Det kan ta lite tid innan skrivaren startar.\n"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "Fungerade det?"
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-msgid "Raw printer"
-msgstr "Rå skrivare"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"För att skriva ut en fil från kommandoraden (terminalfönster) kan du "
-"antingen använda kommandot \"%s <fil>\" eller ett grafiskt utskriftsverktyg: "
-"\"xpp <fil>\" eller \"qtcups <fil>\". De grafiska verktygen låter dig välja "
-"skrivare och ändra alternativinställningarna på ett enkelt sätt.\n"
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Dessa kommandon kan du också använda i fältet \"Utskriftskommando\" som "
-"finns i utskriftsdialogrutan hos många program. Ange då inte filnamnet här, "
-"eftersom filen som ska skrivas ut tillhandahålls av programmet.\n"
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Kommandot \"%s\" låter dig också ändra alternativinställningarna för ett "
-"speciellt utskriftsjobb. Lägg bara till de önskade inställningarna till "
-"kommandoraden, t ex \"%s <fil>\". "
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-"För att se en lista på de tillgängliga alternativen för den aktuella "
-"skrivaren, läs antingen listan som visas nedan eller klicka på knappen "
-"\"Alternativlista för utskrift\".\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"För att skriva ut en fil från kommandoraden (terminalfönster) använd "
-"kommandot \"%s <fil>\".\n"
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Detta kommando kan du också använda i fältet \"Utskriftskommando\" som finns "
-"i utskriftsdialogrutan hos många program. Ange då inte filnamnet här, "
-"eftersom filen som ska skrivas ut tillhandahålls av programmet.\n"
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-"För att se en lista på de tillgängliga alternativen för den aktuella "
-"skrivaren, klicka på knappen \"Alternativlista förutskrift\".\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"För att skriva ut en fil från kommandoraden (terminalfönster) använd "
-"kommandot \"%s <fil>\" eller \"%s <fil>\".\n"
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Du kan också använda det grafiska gränssnittet \"xpdq\" för att ställa in "
-"olika alternativ och hantera utskrifterna.\n"
-"Om du använder KDE som din skrivbordsmiljö har du en \"panikknapp\", en ikon "
-"på skrivbordet med namnet \"Stoppa skrivare\". Om du klickar på den avbryts "
-"omedelbart alla utskrifter. Detta kan vara användabart om papper har "
-"fastnat.\n"
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Kommandona \"%s\" och \"%s\" låter dig också ändra alternativinställningarna "
-"för ett speciellt utskriftsjobb. Lägg bara till de önskade inställningarna "
-"till kommandoraden, t ex \"%s <fil>\".\n"
-
-#: ../../printerdrake.pm_.c:1292
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Skriver ut på skrivare \"%s\""
-
-#: ../../printerdrake.pm_.c:1294
-msgid "Print option list"
-msgstr "Alternativlista för utskrift"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "Läser skrivardata..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "Överför skrivarkonfiguration"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-"Du kan kopiera skrivarkonfigurationen som du har gjort \n"
-"för spoolern %s till %s, din aktuella spooler. All \n"
-"konfigurationsdata (skrivarnamn, beskrivning, plats, \n"
-"anslutningstyp och standardinställningar) flyttas över,\n"
-"men jobb överförs inte.\n"
-"Alla köer kan inte överföras på grund av följande \n"
-"anledning:\n"
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-"CUPS stödjer inte skrivare på Novell-servrar eller skrivare\n"
-"som skickar data in till ett \"free-formed\"-kommando.\n"
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-"PDQ stödjer endast lokala skrivare, LPD-fjärrskrivare och\n"
-"Socket/TCP-skrivare.\n"
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD och LPRng stödjer inte IPP-skrivare.\n"
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-"Köer som inte skapats med detta program eller\n"
-"\"foomatic-configure\" kan inte överföras."
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-"\n"
-"Skrivare konfigurerade med PPD-filerna som tillhandahålls\n"
-"av tillverkarna eller med de ursprungliga CUPS-drivrutinerna kan\n"
-"inte överföras."
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Markera skrivarna du vill överföra och klicka på \n"
-"\"Överför\"."
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "Överför inte skrivare"
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "Överför"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"En skrivare med namn \"%s\" existerar redan under %s. \n"
-"Klicka på \"Överför\" för att skriva över den.\n"
-"Du kan också ange ett nytt namn eller hoppa över den här skrivaren."
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Skrivarnamnet får bara innehålla bokstäver, siffror och "
-"understrykningsstreck."
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Skrivaren \"%s\" existerar redan,\n"
-"vill du verkligen skriva över dess konfiguration?"
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "Nytt skrivarnamn"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Överför %s..."
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-"Du har överfört din förra standardskrivare (\"%s\").\n"
-"Ska den användas som standardskrivare under det\n"
-"nya skrivarsystemet %s?"
-
-#: ../../printerdrake.pm_.c:1423
-msgid "Refreshing printer data ..."
-msgstr "Laddar om skrivardata..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr "Konfiguration av en fjärrskrivare"
-
-#: ../../printerdrake.pm_.c:1432
-msgid "Starting network ..."
-msgstr "Startar nätverket..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-msgid "Configure the network now"
-msgstr "Konfigurera nätverket nu"
-
-#: ../../printerdrake.pm_.c:1455
-msgid "Network functionality not configured"
-msgstr "Nätverksfunktionalitet ej konfigurerad"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-"Du är på väg att konfigurera en fjärrskrivare. För detta\n"
-"krävs nätverksåtkomst, men du har inte konfigurerat ditt\n"
-"nätverk ännu. Om du fortsätter utan att konfigurera nätverket\n"
-"kommer du inte att kunna använda skrivaren som du just\n"
-"nu konfigurerar. Hur vill du fortsätta?"
-
-#: ../../printerdrake.pm_.c:1463
-msgid "Go on without configuring the network"
-msgstr "Fortsätt utan att konfigurera nätverket"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-"Nätverkskonfigurationen som gjordes under installationen \n"
-"kan inte startas nu. Kontrollera om du kommer åt nätverket\n"
-"efter det att du har startat upp ditt system och korrigera\n"
-"konfigurationen med Mandrakes kontrollcentral, sektionen\n"
-"\"Nätverk & Internet\"/\"Anslutning\". Konfigurera sedan\n"
-"skrivaren med hjälp av samma kontrollcentral,\n"
-"sektionen \"Hårdvara\"/\"Skrivare\"."
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-"Nätverksåtkomsten var inte igång och kunde inte \n"
-"startas. Kontrollera din konfiguration och din \n"
-"hårdvara. Försök sedan att konfigurera din\n"
-"fjärrskrivare igen."
-
-#: ../../printerdrake.pm_.c:1516
-msgid "Restarting printing system ..."
-msgstr "Startar om skrivarsystem..."
-
-#: ../../printerdrake.pm_.c:1548
-msgid "high"
-msgstr "hög"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "paranoid"
-msgstr "paranoid"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installerar ett skrivarsystem i säkerhetsnivån %s"
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-"Du är på väg att installera skrivarsystemet %s på\n"
-"ett system som körs i säkerhetsnivån %s.\n"
-"\n"
-"Det här skrivarsystemet körs som en demon (bakgrundsprocess)\n"
-"vilken väntar på skrivarjobb och sedan hanterar dem. Den här\n"
-"demonen är även tillgänglig för fjärrmaskiner via nätverket\n"
-"och kan därmed utsättas för attacker. Därför startas endast\n"
-"ett fåtal valda demoner som standard i denna säkerhetsnivå.\n"
-"\n"
-"Vill du verkligen konfigurera utskrift på den här maskinen?"
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Starting the printing system at boot time"
-msgstr "Startar skrivarsystemet vid uppstart"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-"Skrivarsystemet (%s) kommer inte att startas automatiskt\n"
-"när datorn startas upp.\n"
-"\n"
-"Det är möjligt att den automatiska starten inaktiverades \n"
-"genom att säkerhetsnivån höjdes, eftersom skrivarsystem\n"
-"är en svag punkt när det gäller attacker.\n"
-"\n"
-"Vill du att den automatiska starten av skrivarsystemet\n"
-"ska aktiveras igen?"
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "Kontrollerar installerad mjukvara..."
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "Tar bort LPRng..."
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "Tar bort LPD..."
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Välj utskriftshanterare"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Vilket utskriftssystem (spooler) vill du använda?"
-
-#: ../../printerdrake.pm_.c:1759
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigurerar skrivare \"%s\"..."
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Skrivarinställningar"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr "Förbereder PrinterDrake..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "Vill du konfigurera utskrift?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr "Skrivarsystem: "
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-"Följande skrivare är inställda.\n"
-"Klicka på någon av dem för att ändra den\n"
-"eller för att få information om den.\n"
-"Klicka på \"Lägg till skrivare\" för att lägga till en ny skrivare."
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Normalläge"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Standard)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Skrivare på CUPS-fjärrserver"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-msgid "Printer(s) on remote server(s)"
-msgstr "Skrivare på fjärrserver"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Lägg till skrivare"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-msgid "Do you want to configure another printer?"
-msgstr "Vill du konfigurera en annan skrivare?"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "Ändra skrivarinställning"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Skrivare %s: %s %s\n"
-"Vad vill du ändra på den här skrivaren?"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "Kör!"
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "Skrivarens anslutningstyp"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "Skrivarens namn, beskrivning, plats"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "Skrivarens tillverkare, modell, drivrutin"
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "Skrivarens tillverkare, modell"
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr "Använd denna skrivare som standardskrivare"
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "Skriv ut testsidor"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr "Känner till hur man skriver ut med denna skrivare"
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "Ta bort skrivare"
-
-#: ../../printerdrake.pm_.c:2071
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Tar bort gammal skrivare \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Skrivaren \"%s\" kommer nu att används som standardskrivare."
-
-#: ../../printerdrake.pm_.c:2103
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Vill du verkligen ta bort skrivaren \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2105
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Tar bort skrivare \"%s\"..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy-konfiguration"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Välkommen till proxyverktyget.\n"
-"\n"
-"Här kommer du att kunna sätta upp http- och ftp-proxy\n"
-"med eller utan användarnamn och lösenord.\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Fyll i information om http-proxy.\n"
-"Lämna blankt om du inte vill ha någon http-proxy."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URL ska börja med \"http:\""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Portdelen ska vara numerisk."
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Fyll i information om ftp-proxy.\n"
-"Lämna blankt om du inte vill ha någon ftp-proxy."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL ska börja med \"ftp:\""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Ange användarnamn och lösenord för proxy.\n"
-"Lämna blankt om du inte vill ha något användarnamn/lösenord."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "användarnamn"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "lösenord"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "bekräfta lösenord"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Du angav inte samma lösenord. Försök igen!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan inte lägga till en partition till en _formaterad_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Kan inte skriva fil %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid misslyckades"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid misslyckades (kanske finns det inga raid-verktyg)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Inte tillräckligt många partitioner för RAID-nivå %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Starta ljudsystemet ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron kör kommandon vid angivna, periodiska tidpunkter."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Apmd används för att övervaka batteristatusen i en bärbar dator,\n"
-"samt logga denna till syslog. Den kan även användas för att stänga ner\n"
-"datorn om batteriet håller på att ta slut."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Denna tjänst kör kommandon som givits till \"at\"-kommandot, vid den\n"
-"tidpunkt som angetts. At kan även köra batch-kommandon då\n"
-"datorns belastning minskat under en angiven nivå."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Cron-tjänsten kan köra program periodiskt vid angivna klockslag.\n"
-"Den här cron-demonen, vixie cron har ett antal utökningar och\n"
-"förbättringar över standard UNIX cron, bland annat högre säkerhet\n"
-"och bättre inställningsmöjligheter."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM tillhandahåller musstöd för textbaserade Linux-program,\n"
-"så som Midnight Commander. GPM tillhandahåller också musbaserad\n"
-"kopiering och inklistring samt pop-up-menyer i konsollen."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"Harddrake letar efter hårdvara och kan användas för att konfigurera\n"
-"ny/ändrad hårdvara."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache är en www-server (World Wide Web-server).\n"
-"Den tillhandahåller HTML-dokument och CGI-skript."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Inetd är en basserver som startar andra Internetservrar. Den är\n"
-"ansvarig för startandet av många olika tjänster, såsom telnet, ftp,\n"
-"rsh och rlogin. Om inetd är inaktiverad, kan ingen av dessa servrar köras."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Starta paketfiltrering för 2.2-serien av Linuxkärnan, för att sätta\n"
-"upp en brandvägg som skyddar din maskin från nätverksattacker."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Den här tjänsten laddar den valda tangentbordsmappningen som\n"
-"ställts in i /etc/sysconfig/keyboard. Inställningen kan ändras med\n"
-"kbdconfig-verktyget. Du bör aktivera detta paket på de flesta datorer."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatisk omgenerering av kärnans huvud i /boot för\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatisk upptäckt och konfiguration av hårdvara vid uppstart."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf kommer emellanåt att utföra olika aktiviteter\n"
-"vid uppstart för att hålla systemet i skick."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Lpd är en skrivardemon som behövs för att lpr skall fungera korrekt.\n"
-"Det är i princip en server som tilldelar utskrifter till skrivare."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, används för att bygga en högpresterande och\n"
-"tillgänglig server."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"Named (BIND) är en namnserver (Domain Name Server, DNS) som kan\n"
-"användas för att slå upp IP-adresser från datornamn."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr "Monterar/avmonterar alla nätverksfilsystem (NFS, SMB och NCP)."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiverar/inaktiverar alla de nätverkskort som konfigurerats\n"
-"att starta vid uppstart."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS är ett populärt protokoll för fildelning över TCP/IP-nätverk.\n"
-"Den här demonen är en server för detta protokoll, och konfigureras\n"
-"i filen /etc/exports."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS är ett populärt protokoll för fildelning över TCP/IP-nätverk.\n"
-"Den här demonen tillhandahåller NFS-fillåsning."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Aktivera automatiskt numlock för konsolläge\n"
-"och XFree vid uppstart."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Skapa stöd för OKI 4w och kompatibla Windowsskrivare."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA används för att ansluta t ex ethernet-nätverkskort och modem till\n"
-"bärbara datorer. PCMCIA-tjänsten startas inte om den inte behövs, så det är\n"
-"helt säkert att ha den installerad, även på datorer som inte använder den."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmappern hanterar RPC-anslutningar, vilka används av protokoll som t ex\n"
-"NFS och NIS. En portmapper måste köras på de maskiner som skall fungera\n"
-"som server för sådana protokoll."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix är en MTA (Mail Transport Agent), vilket är det\n"
-"program som flyttar e-post mellan datorer."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Sparar och återladdar enropi-poolen för att ge högre kvalitet\n"
-"på systemets slumptalsgenerator."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Tilldela raw-enheter till blockenheter (som t ex hårddisk-\n"
-"partitioner), för användning av program såsom Oracle."
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed-demonen uppdaterar automatiskt IP-routing-tabeller via RIP-\n"
-"protokollet. RIP är mycket välanvänt på mindre nätverk, men för komplexare\n"
-"nät krävs kraftfullare protokoll."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Rstat-protokollet låter användare se hur mycket en\n"
-"annan dator som kör en rstat-demon används."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Rusers-protokollet låter användare se vilka som är inloggade på\n"
-"en annan dator som kör en rusers-demon."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Rwho-protokollet låter fjärranvändare se en lista på alla användare\n"
-"som är inloggade på en annan dator som kör en rwho-demon (liknar finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Starta ljudsystemet på din maskin"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog är en demon genom vilken andra demoner sköter sin\n"
-"loggning till diverse olika loggfiler. Det är en god idé\n"
-"att alltid köra syslog."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Ladda drivrutinerna för dina USB-enheter."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Startar X Font Server (detta är obligatoriskt för att köra XFree)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Välj vilka tjänster som ska startas automatiskt vid uppstart"
-
-#: ../../services.pm_.c:126
-msgid "Printing"
-msgstr "Skrivare"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr "Fildelning"
-
-#: ../../services.pm_.c:132
-msgid "System"
-msgstr "System"
-
-#: ../../services.pm_.c:137
-msgid "Remote Administration"
-msgstr "Fjärradministration"
-
-#: ../../services.pm_.c:145
-msgid "Database Server"
-msgstr "Databasserver"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Tjänster: %d aktiverad för %d registrerad"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Tjänster"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "startad"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "stoppad"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Tjänster och demoner"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Tyvärr, ingen ytterligare information\n"
-"om den här tjänsten."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Vid uppstart"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Installerar paket..."
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Din partitionstabell kan inte läsas - den är alldeles för trasig.\n"
-"Jag kommer nu att försöka rensa alla felaktiga partitioner."
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "Fel!"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Den nödvändiga avbildsfilen \"%s\" kan inte hittas."
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "Konfiguration för automatisk installation"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Du är på väg att konfigurera en automatisk installationsdiskett. Denna "
-"funktion är en aning riskfylld och måste användas försiktigt.\n"
-"\n"
-"Med den funktionen kan du göra repris av installationen du gjorde på denna "
-"dator, genom att gå igenom några steg och ange dess värden.\n"
-"\n"
-"För maximal säkerhet sker partitionering och formatering aldrig automatiskt, "
-"oavsett vad du väljer vid installationen av denna dator.\n"
-"\n"
-"Vill du fortsätta?"
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "Konfiguration av automatiska steg"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Välj för varje steg om det ska vara en repris av din installation eller om "
-"det ska utföras manuellt."
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Gratulerar!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketten har genererats.\n"
-"Du kan nu göra en repris av din installation."
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Internetdelning"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetdelning är för närvarande aktiverat"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Konfiguration av Internetdelning har redan blivit genomfört.\n"
-"Det är för närvarande aktiverat.\n"
-"\n"
-"Vad vill du göra?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "inaktivera"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "avsluta"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "konfigurera om"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Inaktiverar servrar..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Internetdelning är nu inaktiverat"
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internetdelning för närvarande inaktiverat"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Konfiguration av Internetdelning har redan genomförts.\n"
-"Det är för närvarande inaktiverat.\n"
-"\n"
-"Vad vill du göra?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "aktivera"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Aktiverar servrar..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Internetdelning är nu aktiverat"
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Du är på väg att konfigurera din dator för att dela sin Internetanslutning.\n"
-"Med den funktionen kan andra datorer i ditt nätverk använda din dators "
-"Internetanslutning.\n"
-"\n"
-"Observera: du behöver ett dedikerat nätverkskort för att sätta upp ett "
-"lokalt nätverk (LAN)."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Gränssnitt %s (använder modul %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Gränssnitt %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Inget nätverkskort i ditt system!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ingen ethernet-nätverkskort har hittats i ditt system. Kör "
-"konfigurationsverktyget för hårdvara."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Nätverksgränssnitt"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Det finns bara ett konfigurerat nätverkskort i ditt system:\n"
-"\n"
-"%s\n"
-"\n"
-"Jag är på väg att sätta upp ditt lokala nätverk med det kortet."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Välj vilket nätverkskort som ska kopplas mot ditt lokala nätverk."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Varning, nätverkskortet är redan konfigurerat. Jag kommer att konfigurera om "
-"det."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Potentiell LAN-adresskonflikt hittad i aktuell konfiguration av %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Brandväggskonfiguration upptäckt!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Varning! En existerande brandväggskonfiguration har upptäckts. Du behöver "
-"eventuellt en manuell fix efter installationen."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Konfigurerar..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Konfigurerar skript, installerar mjukvara, startar servrar..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problem att installera paket %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Allt har blivit konfigurerat.\n"
-"Du kan nu dela Internetanslutning med andra datorer i ditt lokala nätverk, "
-"genom automatisk nätverkskonfiguration (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Konfigurationen är redan gjord, men är för närvarande inaktiverad."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Konfigurationen är redan gjord och är för närvarande aktiverad."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Ingen Internetdelning har varit konfigurerad."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Konfigurera Internetanslutning och delning"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Välkommen till verktyget för Internetdelning!\n"
-"\n"
-"%s\n"
-"\n"
-"Klicka på \"Konfigurera\" för att starta inställningsguiden."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Nätverkskonfiguration (%d kort)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Ta bort profil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Profil att ta bort:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Ny profil..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Namn på profilen som ska skapas (den nya profilen skapas som en kopia av den "
-"aktuella):"
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Värddatornamn: "
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Internetåtkomst"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Typ:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Gränssnitt:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Ansluten"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Ej ansluten"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Anslut..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Koppla ner..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Startar din anslutning..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Avslutar din anslutning..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Anslutningen är inte avslutad.\n"
-"Prova att göra det manuellt genom att köra\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"som root."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Systemet har kopplats ner."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Konfigurera Internetåtkomst..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "LAN-konfiguration"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Drivrutin"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Gränssnitt"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protokoll"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Konfigurera lokalt nätverk..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr "Klicka här för att starta guiden ->"
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Verkställ"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Vänta... verkställer konfigurationen"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Du har inga gränssnitt konfigurerade.\n"
-"Konfigurera dem först genom att klicka på \"Konfigurera\"."
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "LAN-konfiguration"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Kort %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Startprotokoll"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Startad vid uppstart"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP-klient"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "aktivera nu"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "inaktivera nu"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen Internetanslutning.\n"
-"Skapa en först genom att klicka på \"Konfigurera\"."
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Konfiguration av Internetanslutning"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Konfiguration av Internetanslutning"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Anslutningstyp: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parametrar"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Ethernet-kort"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP-klient"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Välkommen crackers!"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Obefintlig"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoid"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Den här nivån ska användas med försiktighet. Den gör ditt system enklare\n"
-"att använda, men även väldigt känsligt. Den ska inte användas på en dator\n"
-"som är ansluten till andra datorer eller till Internet. Lösenord används "
-"inte."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Lösenord är nu aktiverade, men att använda systemet i ett nätverk är ändå "
-"inte att rekommendera."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Endast ett fåtal förbättringar för denna säkerhetsnivå. Huvudsakligen fler\n"
-"säkerhetsvarningar och säkerhetskontroller."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Det här är standardsäkerheten rekommenderad för en dator som ansluter till\n"
-"Internet som en klient. Det finns inga säkerhetskontroller."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"På den här säkerhetsnivån är det möjligt att använda systemet som en "
-"server.\n"
-"Säkerhetsnivån är tillräckligt hög för att kunna hantera anslutningar från\n"
-"många klienter."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Samma fördelar som Nivå 4, men nu är systemet helt stängt.\n"
-"Maximal säkerhet."
-
-#: ../../standalone/draksec_.c:65
-msgid "Security level"
-msgstr "Säkerhetsnivå"
-
-#: ../../standalone/draksec_.c:67
-msgid "Use libsafe for servers"
-msgstr "Använd \"libsafe\" för servrar"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Ett bibliotek som skyddar dig mot \"buffer overflow\"- och \"format string\"-"
-"attacker."
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Verkställer säkerhetsnivå"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrollpanelen"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Välj vilket verktyg du vill använda"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "användning: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Vill du att \"Backspace\" ska returnera \"Delete\" i konsollen?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Byt CD-rom"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Sätt in CD-skivan med installationen och klicka på \"Ok\".\n"
-"Om du inte har den, klicka på \"Avbryt\" för att undvika live-uppdatering."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kan inte starta live-uppdateringen!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "ingen serial_usb hittades\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Emulera tredje knappen?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Brandväggskonfiguration"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Brandväggskonfiguration"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Brandvägg\n"
-"\n"
-"Du har redan satt upp en brandvägg.\n"
-"Klicka på \"Konfigurera\" för att ändra på eller ta bort brandväggen."
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Brandvägg\n"
-"\n"
-"Klicka på \"Konfigurera\" för att sätta upp en standardbrandvägg."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Välj språk"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Välj installationsklass"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Hitta hårddisk"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfigurera mus"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Välj tangentbord"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Säkerhet"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Konfigurera filsystem"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatera partitioner"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Välj paket för installation"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installera system"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Lägg till användare"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfigurera nätverk"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfigurera tjänster"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Skapa startdiskett"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Installera starthanterare"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfigurera X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Avsluta installationen"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Tinyfirewall-konfigurator\n"
-"\n"
-"Detta konfigurerar en personlig brandvägg för denna Mandrake Linux-dator.\n"
-"För en kraftfull och dedikerad brandväggslösning, ta en titt på den\n"
-"specialiserade distributionen MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Vi kommer nu att ställa frågor om vilka tjänster du vill tillåta\n"
-"Internet att komma åt. Tänk efter noga innan du\n"
-"svarar, eftersom din dators säkerhet är viktig.\n"
-"\n"
-"Om du inte använder någon eller några av dessa tjänster\n"
-"se till att blockera dem. Du kan ändra denna konfiguration\n"
-"när som helst genom att köra detta program på nytt."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Kör du en webbserver på denna dator som hela Internet behöver komma\n"
-"åt? Om du kör en webbserver som bara behöver kommas åt lokalt av den\n"
-"här datorn, kan du med säkerhet svara \"Nej\" här.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Kör du en namnserver på denna dator? Om du inte använder en\n"
-"sådan, för att förmedla IP- och zoneinformation till hela Internet,\n"
-"svara \"Nej\".\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Vill du tillåta inkommande Secure Shell-anslutningar (ssh)? Det\n"
-"är en telnet-ersättare som du kan använda för att logga in. Om du\n"
-"använder telnet nu, borde du definitivt byta till ssh. Telnet är inte\n"
-"krypterat -- så attackerare kan stjäla dina lösenord om du använder\n"
-"det. Ssh är krypterat och tillåter inte samma avlyssning."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Vill du tillåta inkommande telnet-anslutningar?\n"
-"Det innebär en stor risk, som vi förklarade på förra skärmen.\n"
-"Du rekommenderas att svara \"Nej\" och använda ssh\n"
-"istället för telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Kör du en FTP-server som måste vara åtkomlig från Internet? Om du gör det,\n"
-"rekommenderar vi att du bara använder den för överföringar med Anonymous.\n"
-"Alla lösenord som skickas av FTP kan stjälas av attackerare eftersom FTP\n"
-"inte använder någon kryptering vid överföringen av lösenord.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Kör du en e-postserver? Om du skickar dina meddelanden\n"
-"genom pine, mutt eller någon annan textbaserad e-postklient,\n"
-"gör du antagligen det. Annars borde du blockera med brandvägg.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Kör du en POP- eller IMAP-server här? Det skulle användas\n"
-"för att erbjuda icke-webbaserade e-postkonton till människor\n"
-"genom denna dator.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Du verkar köra en 2.2-kärna. Om ditt IP-nummer ska\n"
-"tilldelas automatiskt av en dator i ditt hem eller på jobbet\n"
-"(dynamisk adressering) behöver vi tillåta det att ske.\n"
-"Är så fallet?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Blir din dator tidsynkroniserad med en annan dator?\n"
-"Vanligtvis används detta av mellanstora och stora Unix/Linux-företag\n"
-"för att synkronisera tider för loggning och dylikt. Om du inte är del\n"
-"i en större kontorsmiljö och inte har hört talas om denna funktion,\n"
-"blir den nog inte det."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurationen slutförd. Ska dessa ändringar skrivas till disken?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Kan inte öppna %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Kan inte öppna %s för skrivning: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Webb/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Nätverksdator (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-server, SMB-server, Proxyserver, ssh-server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kontor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome arbetsstation"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Verktyg för din Palm Pilot eller Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Arbetsstation"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Brandvägg/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domännamns- och Network Information-Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kontorsprogram: ordbehandlare (Kword, Abiword), kalkylprogram (Kspread, "
-"Gnumeric), pdf-visare, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Ljudrelaterade verktyg: mp3- eller midi-spelare, mixrar, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Böcker och \"Howto's\" om Linux och fri mjukvara"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE arbetsstation"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"En samling verktyg för e-post, diskussioner, webb, filöverföring och chatt"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Databas"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL- eller MySQL-databasserver"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Verktyg för att underlätta konfigurationen av din dator"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Ljud"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Verktyg"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentation"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsollverktyg"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix e-postserver, Inn diskussionsgruppsserver"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet-station"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedia-station"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfiguration"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Fler grafiska skrivbordsmiljöer (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, den grundläggande grafiska miljön med en samling "
-"tillhörande verktyg"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafisk miljö"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Utveckling"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Verktyg för att skapa och bränna CD-skivor"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kontorsarbetsstation"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafiska program som till exempel The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Utvecklingsbibliotek, program och include-filer för C och C++"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Nätverksserver"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "E-post/Gruppprogram/Diskussioner"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Spelstation"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videospelare och editorer"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafik"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Underhållande program: arkad, brädspel, strategi, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"En samling verktyg för att läsa och skicka e-post och nyheter (pine, mutt, "
-"tin..) och för att utforska webben"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arkivering, emulatorer, övervakning"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Personlig ekonomi"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"En grafisk miljö med en samling användarvänliga program och skrivbordsverktyg"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienter för olika protokoll inkluderande ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet-gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Redigerings- och uppspelningsprogram för video och ljud"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Andra grafiska skrivbordsmiljöer"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editorer, skal, filverktyg, terminaler"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Program för att hantera din ekonomi, som till exempel gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Spel"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Personlig informationshantering (PIM)"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD-bränning"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Vetenskaplig arbetsstation"
-
-#~ msgid ""
-#~ "To print a file from the command line (terminal window) you can either "
-#~ "use the command \"lpr"
-#~ msgstr ""
-#~ "För att skriva ut en fil från kommandoraden (terminalfönster) kan du "
-#~ "antingen använda kommandot \"lpr"
-
-#~ msgid ""
-#~ " <file>\" or a graphical printing tool: \"xpp <file>\" or \"qtcups <file>"
-#~ "\". The graphical tools allow you to choose the printer and to modify the "
-#~ "option settings easily.\n"
-#~ "These commands you can also use in the \"Printing command\" field of the "
-#~ "printing dialogs of many applications, but here do not supply the file "
-#~ "name because the file to print is provided by the application.\n"
-#~ msgstr ""
-#~ " <fil>\" eller ett grafiskt utskriftsverktyg: \"xpp <fil>\" eller "
-#~ "\"qtcups <fil>\". De grafiska verktygen låter dig välja skrivare och "
-#~ "ändra alternativinställningarna på ett enkelt sätt.\n"
-#~ "Dessa kommandon kan du också använda i fältet \"Utskriftskommando\" som "
-#~ "finns i utskriftsdialogrutan hos många program. Ange då inte filnamnet "
-#~ "här, eftersom filen som ska skrivas ut tillhandahålls av programmet.\n"
-
-#~ msgid ""
-#~ " -o option=setting -o switch <file>\". To get a list of the options "
-#~ "available for the current printer read either the list shown below or "
-#~ "click on the \"Print option list\" button.\n"
-#~ "\n"
-#~ msgstr ""
-#~ " -o option=setting -o switch <fil>\". För att se en lista på de "
-#~ "tillgängliga alternativen för den aktuella skrivaren, läs antingen listan "
-#~ "som visas nedan eller klicka på knappen \"Alternativlista för utskrift"
-#~ "\".\n"
-#~ "\n"
-
-#~ msgid ""
-#~ " -o option=setting -o switch <file>\". To get a list of the options "
-#~ "available for the current printer click on the \"Print option list\" "
-#~ "button.\n"
-#~ "\n"
-#~ msgstr ""
-#~ " -o option=setting -o switch <fil>\". För att se en lista på de "
-#~ "tillgängligaalternativen för den aktuella skrivaren, klicka på knappen "
-#~ "\"Alternativlista för utskrift\".\n"
-#~ "\n"
-
-#~ msgid ""
-#~ "To print a file from the command line (terminal window) use the command "
-#~ "\"pdq"
-#~ msgstr ""
-#~ "För att skriva ut en fil från kommandoraden (terminalfönster) använd "
-#~ "kommandot \"pdq"
-
-#~ msgid " <file>\" or \"lpr"
-#~ msgstr " <fil>\" eller \"lpr"
diff --git a/perl-install/share/po/th.po b/perl-install/share/po/th.po
deleted file mode 100644
index 17ee96fce..000000000
--- a/perl-install/share/po/th.po
+++ /dev/null
@@ -1,8721 +0,0 @@
-# SOME DESCRIPTIVE TITLE
-# Copyright (C) 1999 MandrakeSof
-#
-# Kan Yuenyong <kan@kaiwal.com>, 1999
-# Wachara Chinsettawong <wachara@yahoo.com>, 2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-04-05 14:03GMT+7\n"
-"Last-Translator: Wachara Chinsettawong <wachara@yahoo.com>\n"
-"Language-Team: Thai\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=tis-620\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Configure all heads independently"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Use Xinerama extension"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "¤Í¹¿Ô¡à©¾ÒСÒÃì´ \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Multi-head configuration"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"à¤Ã×èͧ¢Í§¤Ø³Ê¹ÑºÊ¹Ø¹¡Òä͹¿Ô¡áºº multihead \n"
-"¤Ø³µéͧ¡Ò÷ÓÍÐäÃ?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "¡ÃÒ¿¿Ô¤¡ÒÃì´"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "àÅ×Í¡¡ÃÒ¿¿Ô¤¡ÒÃì´"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "àÅ×Í¡ X à«ÔÃì¿àÇÍÃì"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X à«ÔÃì¿àÇÍÃì"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "XFree ª¹Ô´ã˹·Õè¤Ø³µéͧ¡ÒÃÁÕ"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Your card can have 3D hardware acceleration support with XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s with 3D hardware acceleration"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "¡Òä͹¿Ô¡ XFree"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "àÅ×Í¡¢¹Ò´Ë¹èǤÇÒÁ¨Ó¢Í§¡ÃÒ¿¿Ô¤¡ÒÃì´"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "àÅ×Í¡ÍÍ»ªÑè¹à¾ÔèÁàµÔÁÊÓËÃѺà«ÔÃì¿àÇÍÃì"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "àÅ×Í¡¨ÍÀÒ¾"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "¨ÍÀÒ¾"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"¢Ñ鹵͹µèÍ仹Õé¨ÐµéͧãÊè¾ÒÃÒÁÔàµÍÃì·ÕèÁÕ¤ÇÒÁÊӤѭÊͧµÑÇ ä´éá¡èÍѵÃÒ¤ÇÒÁ¶Õè\n"
-"¢Í§¡ÒÃÊ᡹ÀÒ¾µÒÁá¹ÇµÑé§ (vertical refresh rate) «Öè§à»ç¹¤ÇÒÁ¶Õè·ÕèÁÕ¡ÒÃ\n"
-"ÃÕà¿Ãª¨ÍÀÒ¾·Ñé§¨Í áÅСÒÃÍѵÃÒÊ᡹ÀÒ¾µÒÁá¹Ç¹Í¹ «Öè§à»ç¹ÍѵÃҢͧ¡ÒÃÇÒ´¢Í§\n"
-"àÊ鹡ÇÒ´ÊÔ觷ÕèÊӤѭÁÒ¡¡ç¤×Í ¤Ø³¨ÐµéͧÃкت¹Ô´¢Í§Ë¹éҨͫÖè§ÍѵÃÒ¤ÇÒÁ¶Õè·Õè\n"
-"äÁèà¡Ô¹¤ÇÒÁÊÒÁÒö¢Í§¨ÍÀÒ¾ äÁèàªè¹¹Ñé¹ÍÒ¨à¡Ô´¤ÇÒÁàÊÕÂËÒ¡Ѻ¨ÍÀÒ¾ä´é\n"
-"ËÒ¡äÁèá¹èã¨â»Ã´àÅ×Í¡à«çµÍѾẺÁҵðҹ"
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "ÍѵÃÒ¡ÒÃÃÕà¿ÃªµÒÁá¹Ç¹Í¹"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "ÍѵÃÒ¡ÒÃÃÕà¿ÃªµÒÁá¹ÇµÑé§"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "äÁèÁÕ¡Òä͹¿Ô¡¨ÍÀÒ¾"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "ÂѧäÁèä´é¤Í¹¿Ô¡¡ÃÒ¿¿Ô¡¡ÒÃì´"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "ÂѧäÁèä´éàÅ×Í¡¤ÇÒÁ¢¹Ò´¨ÍÀÒ¾"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "¤Ø³µéͧ¡Ò÷´Êͺ¡Òä͹¿Ô¡ËÃ×ÍäÁè"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "ÃÐÇѧ ¡Ò÷´Êͺ¡ÒÃì´áÊ´§¼ÅÍÒ¨·ÓãËé¤ÍÁ¾ÔÇàµÍÃìËÂØ´¡Ò÷ӧҹ"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "·´Êͺ¡Òä͹¿Ô¡"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"Åͧà»ÅÕè¹¾ÒÃÒÁÔàµÍÃìºÒ§µÑÇ"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "ÁÕ¢éͼԴ¾ÅÒ´à¡Ô´¢Öé¹:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "ÍÍ¡ÀÒÂã¹ %d ÇÔ¹Ò·Õ"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "¶Ù¡µéͧËÃ×ÍäÁè?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "à¡Ô´¤ÇÒÁ¼Ô´¾ÅÒ´¢Öé¹ â»Ã´á¡é䢾ÒÃÒÁÔàµÍÃìºÒ§ÍÂèÒ§"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "¢¹Ò´¨ÍÀÒ¾"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "àÅ×Í¡¢¹Ò´¨ÍÀÒ¾áÅФÇÒÁÅÐàÍÕ´ÊÕ"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "¡ÃÒ¿¿Ô¤¡ÒÃì´: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "à«ÔÃì¿àÇÍÃì XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Ẻ¼ÙéàªÕèÂǪҭ (Expert)"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "áÊ´§¢éÍÁÙÅ·Ñé§ËÁ´"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "¤ÇÒÁÅÐàÍÕ´"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "àÅ×Í¡ª¹Ô´¢Í§¤ÕÂìºÍÃì´: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "àÅ×Í¡ª¹Ô´¢Í§àÁéÒÊì: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "´ÕäÇ«ì¢Í§àÁéÒÊì: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "¨ÍÀÒ¾: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "ÍѵÃÒ¤ÇÒÁ¶Õè¡ÇÒ´µÒÁá¹Ç¹Í¹: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "ÍѵÃÒ¤ÇÒÁ¶Õè¡ÇÒ´µÒÁá¹ÇµÑé§: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "¡ÃÒ¿¿Ô¤¡ÒÃì´: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "¡ÃÒ¿¿Ô¤¡ÒÃì´: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "¢¹Ò´Ë¹èǤÇÒÁ¨Ó¢Í§¡ÃÒ¿¿Ô¤¡ÒÃì´: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "ͤÇÒÁÅÐàÍÕ´ÊÕ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "¤ÇÒÁÅÐàÍÕ´¢Í§ÀÒ¾ %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "à«ÔÃì¿àÇÍÃì XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "ä´ÃìàÇÍÃì XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "àµÃÕÂÁ¡Òä͹¿Ô¡¢Í§ X-Window"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "¤Ø³µéͧ¡ÒèзÓÍÐäÃ?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "à»ÅÕ蹨ÍÀÒ¾"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "à»ÅÕ蹡ÃÒ¿¿Ô¤¡ÒÃì´"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "à»ÅÕè¹ÍÍ»ªÑ蹢ͧà«ÔÃì¿àÇÍÃì"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "à»ÅÕè¹¢¹Ò´¨ÍÀÒ¾"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "áÊ´§¢éÍÁÙÅ"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "·´ÊͺÍÕ¡¤ÃÑé§"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "ÍÍ¡"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"à¡çº¡ÒÃà»ÅÕè¹á»Å§\n"
-"¡ÒûÃѺáµè§»Ñ¨¨ØºÑ³¤×Í:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "¡ÃسÒà¢éÒä»·Õè %s ÍÕ¡¤ÃÑé§à¾×èÍàÃÔèÁ¡ÒÃà»ÅÕè¹á»Å§"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "¡ÃسÒÍÍ¡ä»áÅÐãªé Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "ãËéà»ç¹¡ÃÒ¿¿Ô¤àÁ×èÍàÃÔèÁµé¹"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"â»Ãá¡ÃÁ¨Ð¡Ó˹´ãËé¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ãªé§Ò¹áºº¡ÃÒ¿¿Ô¤àÁ×èÍàÃÔèÁºÙµ\n"
-"¤Ø³µéͧ¡ÒèÐãËé·Ó§Ò¹áºº¡ÃÒ¿¿Ô¤àÁ×èÍÃÕºÙµËÃ×ÍäÁè?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ÊÕ (8 ºÔµ)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "ÊÒÁËÁ×è¹Êͧ¾Ñ¹ÊÕ (15 ºÔµ)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "Ë¡ËÁ×è¹ËéҾѹÊÕ (16 ºÔµ)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "ÊԺˡÅéÒ¹ÊÕ (24 ºÔµ)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "ÊÕè¾Ñ¹ÅéÒ¹ÊÕ (32 ºÔµ)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB ËÃ×ÍÁÒ¡¡ÇèÒ"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "¨ÍÀÒ¾ÇÕ¨ÕàÍẺÁҵðҹ 640x480 ·Õè 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA ¢¹Ò´ 800x600 ·Õè 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "¤ÍÁá¾µµÔàºÔšѺ 8514 ¢¹Ò´ 1024x768 ·Õè 87 Hz interlaced (äÁèÁÕ 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA ¢¹Ò´ 1024x768 ·Õè 87 Hz interlaced ¢¹Ò´ 800x600 ·Õè 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 ·Õè 60 Hz, 640x480 ·Õè 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 ·Õè 60 Hz, 800x600 ·Õè 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA ¢¹Ò´ 1024x768 ·Õè 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency «Öè§ÊÒÁÒö¡Ó˹´¢¹Ò´ 1280x1024 ·Õè 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency «Öè§ÊÒÁÒö¡Ó˹´¢¹Ò´ 1280x1024 ·Õè 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency «Öè§ÊÒÁÒö¡Ó˹´¢¹Ò´ 1280x1024 ·Õè 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "¨ÍÀÒ¾·ÕèÊÒÁÒö¡Ó˹´ 1600x1200 ·Õè 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "¨ÍÀÒ¾·ÕèÊÒÁÒö¡Ó˹´ 1600x1200 ·Õè 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "à«ç¡àµÍÃìáá¢Í§ºÙµ¾ÒÃìµÔªÑè¹"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "à«ç¡àµÍÃìáá¢Í§ä´ÃÇì (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "¡ÒõԴµÑé§ SILO"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "¤Ø³¨ÐµÔ´µÑ駺ٵâËÅ´à´ÍÃìäÇé·Õèä˹?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "¡ÒõԴµÑé§ LILO/grub"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO Ẻ text menu"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO Ẻ graphical menu"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Boot ¨Ò¡ DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "ÍêÍ»ªÑè¹ËÅÑ¡¢Í§ Bootloader"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Bootloader ·Õè¨Ðãªé"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "¡ÒõԴµÑé§ Bootloader"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "ÍØ»¡Ã³ìºÙµ"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (doesn't work on old BIOSes)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "ẺÍÑ´ (Compact)"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "ẺÍÑ´ (compact)"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "âËÁ´¢Í§¡ÒÃáÊ´§¼Å"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "˹èǧàÇÅÒ¡è͹·Ó¡ÒúٵÍÔÁàÁ¨·Õèãªé"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "ÃËÑʼèÒ¹"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "ÃËÑʼèÒ¹ (ãÊèÍÕ¡¤ÃÑé§)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "ÍçÍ»ªÑ蹨Óà¾ÒзÕèãªé¡Ñº¤ÍÁÁÒ¹´ìäŹì"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "¨Óà¾ÒÐ"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "ź /tmp µÍ¹ boot ·Ø¡¤ÃÑé§"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "¡Ó˹´¤èÒ˹èǤÇÒÁ¨Ó (RAM) ãËé¶Ù¡µéͧ¶éÒµéͧ¡Òà (Ãкº¾º %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Enable multi profiles"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "ãËé»é͹¢éÍÁÙŢͧ¢¹Ò´Ë¹èǤÇÒÁ¨Óà»ç¹ Mb"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "ÍçÍ»ªÑè¹ ``ÍêÍ»ªÑ蹨Óà¾ÒзÕèãªé¡Ñº¤ÍÁÁÒ¹´ìäŹì'' ¨ÐµéͧãÊèÃËÑʼèÒ¹´éÇÂ"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "â»Ã´ÅͧÍÕ¡¤ÃÑé§"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "ÃËÑʼèÒ¹äÁèàËÁ×͹¡Ñ¹"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "¢éͤÇÒÁ init"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Kernel Boot Timeout"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Enable CD Boot?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Enable OF Boot?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Default OS?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"µèÍ仹Õéà»ç¹¢éÍÁÙŵèÒ§æ\n"
-"¤Ø³ÊÒÁÒöà¾ÔèÁ¢éÍÁÙÅËÃ×Íá¡é䢢éÍÁÙÅ·ÕèÁÕä´é"
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "à¾ÔèÁ"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "·ÓàÃÕºÃéÍÂáÅéÇ"
-
-#: ../../any.pm_.c:217
-#, fuzzy
-msgid "Modify"
-msgstr "á¡éä¢ RAID"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "¢éÍÁÙÅ»ÃÐàÀ·ã´·Õè¤Ø³µéͧ¡ÒÃà¾ÔèÁ"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Åչء«ì"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Ãкº»¯ÔºÑµÔ¡ÒÃÍ×è¹æ (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Ãкº»¯ÔºÑµÔ¡ÒÃÍ×è¹æ (Mac OS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Ãкº»¯ÔºÑµÔ¡ÒÃÍ×è¹æ (ÇÔ¹â´ÇÊì...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Image"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Read-write"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Table"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Unsafe"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Label"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Default"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-size"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "ź¢éÍÁÙÅ"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "äÁè͹حҵãËéÁÕËÑÇ¢éÍÇèÒ§"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "ËÑÇ¢é͹Õé¶Ù¡ãªéä»àÃÕºÃéÍÂáÅéÇ"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "µÃǨ¾º %s ÍÔ¹à·ÍÃìà¿Ê %s"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "¤Ø³ÁÕÍѹÍ×è¹æÍÕ¡ËÃ×ÍäÁè?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "¤Ø³ÁÕÍÔ¹à·ÍÃìà¿Ê %s ¨Ó¹Ç¹à·èÒäËÃè?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "äÁèµéͧ"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "ãªè"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "ÍèÒ¹µèÍ¢éÍÁÙŢͧÎÒÃì´áÇÃì"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "µÔ´µÑé§ä´ÃàÇÍÃìÊÓËÃѺ %s ¡ÒÃì´ %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(âÁ´ÙÅ %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "µéͧ¡ÒÃãËéâ»Ãá¡ÃÁ·´Åͧãªéä´ÃàÇÍÃì %s ª¹Ô´ã´?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"㹺ҧ¡Ã³Õ ÊÓËÃѺä´ÃàÇÍÃì %s ¨Ð¨Óà»ç¹µéͧãªé¢éÍÁÙÅà¾ÔèÁàµÔÁà¾×èÍ\n"
-"ãËéÊÒÁÒö·Ó§Ò¹ä´é¶Ù¡µéͧ áÁéÇèÒä´ÃàÇÍÃìÍÒ¨·Ó§Ò¹ä´éâ´Â»¡µÔ â´Â»ÃÒȨҡ\n"
-"¢éÍÁÙŴѧ¡ÅèÒÇ   ¤Ø³µéͧ¡ÒèÐÃкØÍêÍ»ªÑè¹à¾ÔèÁàµÔÁ¾ÔàÈÉËÃ×ÍãËéâ»Ãá¡ÃÁ·Ó¡ÒÃ\n"
-"µÃǨËÒ¢éÍÁÙÅ·Õè¨Óà»ç¹µéͧãªé? 㹺ҧ¡Ã³Õ¡ÒõÃǨËÒÍÒ¨·ÓãËé¤ÍÁ¾ÔÇàµÍÃìáΧ¤ì\n"
-"áµè¨ÐäÁèà»ç¹ÍѹµÃÒ¡Ѻ¤ÍÁ¾ÔÇàµÍÃì"
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "µÃǨËÒÍѵâ¹ÁѵÔ"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "ÃкØÍêÍ»ªÑè¹"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "¤Ø³ÊÒÁÒö»é͹¢éÍÁÙÅÍêÍ»ªÑè¹ãËé¡ÑºâÁ´ÙÅ %s ä´éáÅéÇ"
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"¤Ø³ÊÒÁÒö»é͹¢éÍÁÙÅÍêÍ»ªÑè¹ãËé¡ÑºâÁ´ÙÅ %s ä´éáÅéÇ\n"
-"ÍêÍ»ªÑ蹨ÐÍÂÙèã¹ÃٻẺ ``name=value name2=value2 ...''\n"
-"µÑÇÍÂèÒ§àªè¹, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "ÍêÍ»ªÑ蹢ͧâÁ´ÙÅ:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"¡ÒÃâËÅ´âÁ´ÙÅ %s ÅéÁàËÅÇ\n"
-"¤Ø³µéͧ¡ÒÃãËé·´ÅͧÍÕ¡¤ÃÑ駴éǾÒÃÒÁÔàµÍÃìÍ×è¹æÍÕ¡ËÃ×ÍäÁè?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(à¾ÔèÁ %s àÃÕºÃéÍÂáÅéÇ)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "ÃËÑʼèÒ¹¹Õé§èÒµèÍ¡ÒÃà´Ò"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "â»Ã´»é͹ª×èͼÙéãªé"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "ª×èͼÙéãªé¨ÐÊÒÁÒöÁÕä´é੾ÒеÑÇÍÑ¡ÉõÑÇàÅç¡ µÑÇàÅ¢ '-' áÅÐ '_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "ª×èͼÙéãªé¹Õéä´é¶Ù¡à¾ÔèÁŧä»ã¹ÃкºàÃÕºÃéÍÂáÅéÇ"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "à¾ÔèÁ¼Ùéãªé"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"ãËéãÊè¼Ùéãªé\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "ÂÍÁÃѺ¼Ùéãªé"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "ª×èÍàµçÁ"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "ª×èͼÙéãªé"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "àªÅÅì·Õèãªé"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Icon"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:757
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"¼ÁäÁèÊÒÁÒö·ÓãËé·èÒ¹à¢éÒ·Ó§Ò¹â´Âãªéª×èͤ¹¤¹Ë¹Öè§áººÍѵâ¹ÁѵÔ\n"
-"¶éҤسäÁèµéͧ¡ÒÃãªé§Ò¹ÃٻẺ¹Õé¡Ãسҡ´»ØèÁ¡àÅÔ¡"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "àÅ×Í¡¼Ùéãªé default"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "àÅ×Í¡ window manager:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "¡ÃسÒàÅ×Í¡ÀÒÉÒ·Õèµéͧ¡ÒÃãªé"
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "¤Ø³ÊÒÁÒöàÅ×Í¡ÀÒÉÒÍ×蹫Ö觨ÐÊÒÁÒöãªéä´éËÅѧµÔ´µÑé§"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "·Ñé§ËÁ´"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"ÂÔ¹´Õµé͹ÃѺÊÙè %s â»Ãá¡ÃÁàÅ×Í¡ãªéÃкº»¯ÔºÑµÔ¡ÒÃ!\n"
-"\n"
-"àÅ×Í¡Ãкº»¯ÔºÑµÔ¡ÒÃËÃ×Í\n"
-"ÃÍ %d ÇÔ¹Ò·Õà¾×èÍãªé¡Òúٵ¨Ò¡µÑÇàÅ×Í¡µÑ駵é¹\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "ÂÔ¹´Õµé͹ÃѺÊÙè GRUB the operating system chooser!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "ãªé %c áÅÐ %c à¾×èÍàÅ×Í¡."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "¡Ãسҡ´ enter Ãкº·Õèµéͧ¡Òà 'e' à¾×èÍà»ÅÕè¹á»Å§ "
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "¤ÓÊÑ觡è͹ boot, ËÃ×Í 'c' ¶éÒµéͧ¡Òà command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "OS ·Õè¶Ù¡àÅ×Í¡¨Ð·Ó¡Òà boot ã¹ %d ÇÔ¹Ò·Õ"
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "äÁèÁÕ·Õè¾Íã¹ /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "¤Ø³¨ÐµÔ´µÑ駺ٵâËÅ´à´ÍÃìäÇé·Õèä˹?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "no help implemented yet.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Boot Style Configuration"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_ä¿Åì"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/ä¿Åì/_àÅÔ¡"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Categorizing Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "¨ÍÀÒ¾ª¹Ô´ãËÁè"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "¨ÍÀÒ¾·ÑèÇä»"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Gtk+ Monitor ·ÑèÇä»"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Ãѹ Aurora ¢³Ð boot"
-
-#: ../../bootlook.pm_.c:100
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "¡ÒÃËÁعâ·ÃÈѾ·ì´éÇÂâÁà´çÁ"
-
-#: ../../bootlook.pm_.c:102
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"ÂÔ¹´Õµé͹ÃѺÊÙèà¤Ã×èͧÁ×Í㹡ÒõԴµèÍ internet Ẻ share\n"
-"\n"
-"%s\n"
-"\n"
-"¡´ ``Ok'' ¶éҤسµéͧ¡ÒÃàÃÔèÁ¡Ò÷ӧҹ¢Í§ setup wizard"
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "¡ÒûÃѺáµè§"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Boot mode"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "System mode"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Ãѹ X-Window àÁ×èÍàÃÔèÁ·Ó§Ò¹"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "äÁèµéͧ¡Òà autologin"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "ãªèáÅéÇ ¼Áµéͧ¡Òà autologin ÊÓËÃѺ¼ÙéãªéÃÒ¹Õé"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "¡àÅÔ¡"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "äÁèÊÒÁÒöà»Ô´ /etc/inittab ÁÒÍèÒ¹ä´é: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "¡ÒõԴµÑé§ LILO ÅéÁàËÅÇ µèÍ仹Õéà»ç¹¢éͼԴ¾ÅÒ´·Õèà¡Ô´¢Öé¹"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d ¹Ò·Õ"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 ¹Ò·Õ"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d ÇÔ¹Ò·Õ"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "¡ÃØ³Ò·Ó backup ¡è͹"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "â»Ã´ÍèÒ¹ÍÂèÒ§¶Õè¶éǹ!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"¶éҤسµéͧ¡ÒÃãªé aboot ¤ÇÃÃÐÇѧÇèÒµéͧÁÕ·ÕèÇèÒ§ (2048 sectors) \n"
-"´éҹ˹éҢͧ disk"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "¼Ô´¾ÅÒ´"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Wizard"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "ãËÁè"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-#, fuzzy
-msgid "Remote"
-msgstr "ª×èͤÔÇÃÕâÁ·"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "¡Ó˹´¨Ø´àÁéÒ·ì"
-
-#: ../../diskdrake.pm_.c:209
-#, fuzzy
-msgid "Options"
-msgstr "/Options/·´Åͧ"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "»ÃÐàÀ·"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "àÅÔ¡àÁéÒ·ììÃкºä¿Åì"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "àÁéÒ·ì"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "àÅ×Í¡¡Ô¨¡ÃÃÁ"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"¶éҤسÁÕ ¾ÒÃìµÔªÑè¹ FAT ·ÕèãË­è ¾ÒÃìµÔªÑè¹ à´ÕÂÇ\n"
-"(«Öè§â´Â»¡µÔ Microsoft Dos/Windows ã¢é)\n"
-"¼Áá¹Ð¹ÓãËé¤Ø³»ÃѺ¢¹Ò´ ¾ÒÃìµÔªÑè¹ àÊÕ¡è͹\n"
-"(¡´·ÕèÁѹáÅéÇ¡´ \"»ÃѺ¢¹Ò´\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "â»Ã´àÅ×Í¡¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "â»Ã´àÅ×Í¡¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "â»Ã´àÅ×Í¡¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "ÃÒÂÅÐàÍÕ´"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "¡ÒÃàÁéÒ·ìÅéÁàËÅÇ"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "ÊÇÍ»"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "ÇèÒ§"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Í×è¹æ"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "»ÃÐàÀ·¢Í§Ãкºä¿Åì:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "ÊÃéÒ§"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "ãªé ``%s'' á·¹"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "ź"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "ãªé ``Unmount'' ¡è͹"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "¡ÒÃà»ÅÕ蹪¹Ô´¾ÒÃìµÔªÑè¹ %s ¢éÍÁÙÅ·Ñé§ËÁ´ã¹¾ÒÃìµÔªÑè¹¹Õé¨Ð¶Ù¡Åº·Ôé§"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "¤Ø³µéͧ¡ÒÃàÁéÒ·ìÍØ»¡Ã³ì %s äÇé·Õèã´?"
-
-#: ../../diskdrake.pm_.c:500
-#, fuzzy
-msgid "Mount options"
-msgstr "ÍêÍ»ªÑ蹢ͧâÁ´ÙÅ:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:532
-#, fuzzy
-msgid "Change type"
-msgstr "à»ÅÕè¹»ÃÐàÀ·¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "¤Ø³µéͧ¡ÒÃàÅ×Í¡ filesystem ã´"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "à«ÔÃì¿àÇÍÃì"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose a partition"
-msgstr "àÅ×Í¡¡Ô¨¡ÃÃÁ"
-
-#: ../../diskdrake_interactive.pm_.c:163
-#, fuzzy
-msgid "Choose another partition"
-msgstr "ÊÃéÒ§¾ÒÃìµÔªÑè¹ãËÁè"
-
-#: ../../diskdrake_interactive.pm_.c:188
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "»¡µÔ > ÊÓËÃѺ¼ÙéªÓ¹Ò­"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "ÊÓËÃѺ¼ÙéªÓ¹Ò­ > »¡µÔ"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "¡àÅÔ¡"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "·Ó§Ò¹µèÍËÃ×ÍäÁè?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "ÍÍ¡â´ÂäÁèµéͧºÑ¹·Ö¡"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "ÍÍ¡â´ÂäÁèµéͧà¢Õ¹µÒÃÒ§¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake_interactive.pm_.c:237
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "¤Ø³µéͧ¡Ò÷´Êͺ¡Òä͹¿Ô¡ËÃ×ÍäÁè"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "¡Ó˹´áººÍѵâ¹ÁѵÔ"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "ÅéÒ§·Ñé§ËÁ´"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "More"
-
-#: ../../diskdrake_interactive.pm_.c:250
-#, fuzzy
-msgid "Hard drive information"
-msgstr "¡ÒõÃǨËÒÎÒÃì´ä´ÃÇì"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "äÁèÁÕ¾×é¹·Õèà¾Õ§¾ÍÊÓËÃѺ¡ÒÃáºè§ÊÑ´Êèǹ¾ÒÃìµÔªÑè¹áººÍÍâµé"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "¾ÒÃìµÔªÑè¹áºº primary ¶Ù¡ãªé·Ñé§ËÁ´áÅéÇ"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "â»Ãá¡ÃÁäÁèÊÒÁÒöà¾ÔèÁ¾ÒÃìµÔªÑè¹ä´éÍÕ¡"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"ËÒ¡µéͧ¡ÒÃà¾ÔèÁ¾ÒÃìµÔªÑè¹ â»Ã´Åº¾ÒÃìµÔªÑè¹·Ôé§Ë¹Ö觾ÒÃìµÔªÑè¹à¾×èÍÊÃéÒ§\n"
-"¾ÒÃìµÔªÑè¹áºº extended ä´é"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "ºÑ¹·Ö¡µÒÃÒ§¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "¡ÙéµÒÃÒ§¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "¡ÙéµÒÃÒ§¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "¡ÙéµÒÃÒ§¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake_interactive.pm_.c:293
-msgid "Removable media automounting"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "àÅ×Í¡ä¿Åì"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"¾ÒÃìµÔªÑè¹áºç¤ÍѾäÁèÁÕ¢¹Ò´à·èҡѹ\n"
-"µéͧ¡Ò÷ӵèÍËÃ×ÍäÁè?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "¤Óàµ×͹"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"¡ÃسÒãÊèá¼è¹¿ÅéÍ»»Õéã¹ä´ÃÇì\n"
-"¢éÍÁÙÅ·Ñé§ËÁ´º¹á¼è¹¿ÅéÍ»»Õé¨Ð¶Ù¡Åº"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "¡ÓÅѧ¾ÂÒÂÒÁ¡ÙéµÒÃÒ§¾ÒÃìµÔªÑ蹤׹"
-
-#: ../../diskdrake_interactive.pm_.c:340
-#, fuzzy
-msgid "Detailed information"
-msgstr "áÊ´§¢éÍÁÙÅ"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "à»ÅÕè¹¢¹Ò´"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "ÂéÒÂ"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "¿ÍÃìáÁµ"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "áÍ礷տ"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "à¾ÔèÁãËé RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "à¾ÔèÁãËé LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "źÍÍ¡¨Ò¡ RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "źÍÍ¡¨Ò¡ LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "á¡éä¢ RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "ãªéÊÓËÃѺ loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "ÊÃéÒ§¾ÒÃìµÔªÑè¹ãËÁè"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "àÃÔèÁà«ç¡àµÍÃì: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "¢¹Ò´à»ç¹ MB: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "»ÃÐàÀ·¢Í§Ãкºä¿Åì: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "¨Ø´àÁéÒ·ì: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "¢éÍ¡Ó˹´: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "¿ÍÃìáÁµ loopback file %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "à»ÅÕè¹»ÃÐàÀ·¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "¤Ø³µéͧ¡ÒÃàÁéÒ·ì loopback file %s äÇé·Õèã´?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "¤Ó¹Ç³¢Íºà¢µ¢Í§Ãкºä¿Åì"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "»ÃѺ¢¹Ò´"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "¾ÒÃìµÔªÑè¹¹ÕéäÁèÊÒÁÒöà»ÅÕè¹¢¹Ò´ä´é"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "¢éÍÁÙÅ·Ñé§ËÁ´ã¹¾ÒÃìµÔªÑè¹¹Õé¤ÇèзӡÒÃÊÓÃͧäÇé"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "ËÅѧ¨Ò¡à»ÅÕè¹¢¹Ò´¾ÒÃìµÔªÑè¹ %s ¢éÍÁÙÅ·Ñé§ËÁ´ã¹¾ÒÃìµÔªÑè¹¹Õé¨ÐËÒÂä»"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "àÅ×Í¡¢¹Ò´ãËÁè"
-
-#: ../../diskdrake_interactive.pm_.c:591
-#, fuzzy
-msgid "New size in MB: "
-msgstr "¢¹Ò´à»ç¹ MB: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "¤Ø³µéͧ¡ÒèÐÂéÒÂä»´ÔÊ¡ìä˹"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "à«ç¡àµÍÃì"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "¤Ø³µéͧ¡ÒÃÂéÒÂä»à«ç¡àµÍÃìä˹"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "ÂéÒÂ"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "ÂéÒ¾ÒÃìµÔªÑè¹..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "àÅ×Í¡ RAID à¾×èÍà¾ÔèÁà¢éÒä»"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "ãËÁè"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "àÅ×Í¡ LVM ·ÕèÁÕÍÂÙèà¾×èÍà¾ÔèÁà¢éÒä»"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "ª×èÍ LVM"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "¾ÒÃìµÔªÑè¹¹ÕéäÁèÊÒÁÒöãªé¡Ñº loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "ª×èÍ Loopback file: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "ª×èÍàµçÁ"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "File already used by another loopback, choose another one"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "ä¿ÅìÁÕÍÂÙèáÅéÇ µéͧ¡ÒÃãªé?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "ÍØ»¡Ã³ì"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "ÃдѺ"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "¢¹Ò´¢Í§ chunk"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "ÃÐÇѧ ¡Ò÷ӧҹ¹ÕéÍѹµÃÒÂ"
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "¡ÒÃ·Ó partitioning ª¹Ô´ã´?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"¢ÍÍÀÑ â»Ãá¡ÃÁäÁèÊÒÁÒöÊÃéÒ§ /boot º¹ä´Ã¿ì (·ÕèÁÕ¢¹Ò´ä«ÅÔ¹à´ÍÃìÁÒ¡¡ÇèÒ 1024)\n"
-"ËÃ×ͤسãªé LILO áÅÐâ»Ãá¡ÃÁäÁè·Ó§Ò¹ ËÃ×ͤسäÁèä´éãªé LILO áÅФسäÁèµéͧ¡Òà /boot"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"¾ÒÃìµÔªÑè¹·Õè¤Ø³àÅ×Í¡ãËéà»ç¹ root (/) ÁÕ¡ÒáÓ˹´·Ò§¡ÒÂÀÒ¾ãËéÁÕ¢¹Ò´à¡Ô¹\n"
-"ä«ÅÔ¹à´ÍÃì·Õè 1024 ¢Í§ÎÒÃì´´ÔÊ¡ì áÅФسäÁèÁÕ¾ÒÃìµÔªÑè¹ /boot\n"
-"¶éҤسµéͧ¡ÒÃãªé LILO à»ç¹ºÙµáÁà¹à¨ÍÃì â»Ã´ÃÐÁÑ´ÃÐÇѧ㹡ÒÃà¾ÔèÁ¾ÒÃìµÔªÑè¹ /boot"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"¤Ø³ä´éàÅ×Í¡ Software RAID ¾ÒÃìµÔªÑè¹ à»ç¹ root (/) \n"
-"bootloader äÁèÊÒÁÒö·Ó§Ò¹â´ÂäÁèÁÕ /boot ¾ÒÃìµÔªÑè¹ \n"
-"à¾ÃÒЩ¹Ñ鹨Óà»ç¹µéͧà¾ÔèÁ /boot ¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "µÒÃÒ§¾ÒÃìµÔªÑ蹢ͧä´Ã¿ì %s ¨Ð¶Ù¡ºÑ¹·Ö¡Å§ä»ã¹´ÔÊ¡ì"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "¤Ø³¨Ðµéͧ·Ó¡ÒÃÃÕºÙµÃкº¡è͹·Õè¨Ð·Ó¡ÒÃá¡éä¢"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "ËÅѧ¨Ò¡ format ¾ÒÃìµÔªÑè¹ %s ¢éÍÁÙÅ·Ñé§ËÁ´ã¹¾ÒÃìµÔªÑè¹¹Õé¨Ð¶Ù¡Åº·Ôé§"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "¿ÍÃìáÁµ"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "¿ÍÃìáÁµ loopback file %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "¿ÍÃìáÁµ¾ÒÃìµÔªÑè¹ %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid failed"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "äÁèÁÕ¾×é¹·Õèà¾Õ§¾ÍÊÓËÃѺ ¾ÒÃìµÔªÑè¹ ãËÁè"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "äÁèÁÕ¾×é¹·Õèà¾Õ§¾ÍÊÓËÃѺ ¾ÒÃìµÔªÑè¹ ãËÁè"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "¤ÇÒÁÅÐàÍÕ´¢Í§ÀÒ¾ %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "ÍØ»¡Ã³ì: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "ÍÑ¡ÉÃä´ÃÇìẺ´ÍÊ: %s (à»ç¹¡ÒäҴà´Ò)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "»ÃÐàÀ·: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "ª×èÍ: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "àÃÔèÁµé¹: à«ç¡àµÍÃì %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "¢¹Ò´: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s à«ç¡àµÍÃì"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "ä«ÅÔ¹à´ÍÃì %d à»ç¹ ä«ÅÔ¹à´ÍÃì %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "¿ÍÃìáÁµ\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "ÂѧäÁèä´é¿ÍÃìáÁµ\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "àÁéÒ·ì\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback file(s): %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"¾ÒÃìµÔªÑè¹·Õè¡Ó˹´ãËéºÙµ«Ö觡Ó˹´äÇéáÅéÇ\n"
-"    (ÊÓËÃѺºÙµ¢Í§ MS-DOS äÁèãªè lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "ÃдѺ %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "¢¹Ò´¢Í§ Chunk %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "´ÔÊ¡ìẺ RAID %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback file name: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"ÁÕ¤ÇÒÁà»ç¹ä»ä´é·Õè¾ÒÃìµÔªÑè¹¹Õé\n"
-"à»ç¹¾ÒÃìµÔªÑ蹢ͧä´ÃàÇÍÃì ¤Ø³¤Ç÷Õè¨Ð\n"
-"»ÅèÍÂÁѹ·Ôé§äÇéẺ¹Õé\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "¢¹Ò´: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "¢éÍÁÙÅ·Ò§¡ÒÂÀÒ¾: %s ä«ÅÔ¹à´ÍÃì, %s ËÑÇÍèÒ¹, %s à«é¡àµÍÃì\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "¢éÍÁÙÅ: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-disks %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "ª¹Ô´µÒÃÒ§¾ÒÃìµÔªÑè¹: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "º¹ºÑÊ %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, fuzzy, c-format
-msgid "Options: %s"
-msgstr "¾ÒÃìµÔªÑè¹ %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "¡ÓÅѧ¿ÍÃìáÁµ %s ¢Í§ %s ·ÕèÁջѭËÒ"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "äÁè·ÃÒºÇèҨпÍÃìáÁµ %s à»ç¹ª¹Ô´ %s ä´éÍÂèÒ§äÃ"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "¡ÒÃàÁéÒ·ìÅéÁàËÅÇ"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "¡ÒÃàÁéÒ·ìÅéÁàËÅÇ: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "¼Ô´¾ÅҴ¡àÅÔ¡¡ÒÃàÁéÒ·ì %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "§èÒÂ"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "à«ÔÃì¿àÇÍÃì"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "¤Ø³äÁèÊÒÁÒöãªé JFS ÊÓËÃѺ¾ÒÃìµÔªÑè¹·Õè¹éÍ¡ÇèÒ 16MB ä´é"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "¤Ø³äÁèÊÒÁÒöãªé ReiserFS ÊÓËÃѺ¾ÒÃìµÔªÑè¹·Õè¹éÍ¡ÇèÒ 32MB ä´é"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "¨Ø´àÁéÒ·ì¨ÐµéͧàÃÔèÁ´éÇ /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "ÁÕ¾ÒÃìµÔªÑè¹·Õèà»ç¹¨Ø´àÁéÒ·ì·Õè %s àÃÕºÃéÍÂáÅéÇ\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "¤Ø³äÁèÊÒÁÒöãªé LVM Logical Volume ÊÓËÃѺ %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "This directory should remain within the root filesystem"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "à¡Ô´¢éͼԴ¾ÅҴ㹡ÒÃà»Ô´ %s ÊÓËÃѺ¡ÒÃà¢Õ¹: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"à¡Ô´¢éͼԴ¾ÅÒ´¢Öé¹ - äÁ辺ÍØ»¡Ã³ì·Õè¶Ù¡µéͧà¾×èͨÐÊÃéÒ§Ãкºä¿ÅìãËÁè "
-"â»Ã´µÃǨÊͺÎÒÃì´áÇÃì¢Í§·èÒ¹à¾×èÍá¡é䢻ѭËÒ¹Õé"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "¤Ø³ÂѧäÁèä´éáºè§¾ÒÃìµÔªÑè¹!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"ÅÕչء«ì¨Ð¨Ñ´¡ÒÃÃкºàÇÅÒà»ç¹ GMT ËÃ×Í \"Greenwich Mean Time\" áÅÐá»Å§¤èÒ\n"
-"àÇÅÒãËéà»ç¹àÇÅÒ·éͧ¶Ôè¹ «Ö觨ТÖé¹ÍÂÙè¡ÑºÂèÒ¹àÇÅÒ·Õè¤Ø³ä´éàÅ×Í¡àÍÒäÇé"
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "¡ÃسÒÍ´·¹ÃÍÊÑ¡¤ÃÙè ¡Ò÷ӧҹÍÒ¨ãªéàÇÅÒËÅÒ¹ҷÕ"
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"¡ÃسÒàÅ×Í¡ \"µÔ´µÑé§\" ¶éÒÂѧäÁèà¤ÂÁÕ¡ÒõԴµÑé§ Mandrake Linux ÁÒ¡è͹\n"
-"ËÃ×͵éͧ¡ÒõԴµÑé§ OS ËÅÒµÑÇ\n"
-"\n"
-"\n"
-"¡ÃسÒàÅ×Í¡ \"Update\" ¶éҤسµéͧ¡Òà Update Mandrake Linux ·ÕèµÔ´µÑé§ÍÂÙèáÅéÇ\n"
-"\n"
-"\n"
-"áÅéÇáµè¤ÇÒÁÃÙéã¹ Linux ¢Í§¤Ø³ ¡ÃسÒÇÔ¸Õ¡Ò÷ÕèàËÁÒÐÊÁ·ÕèÊØ´\n"
-"\n"
-"* Recommanded: ¶éҤسäÁèà¤Âŧ Linux ÁÒ¡è͹\n"
-"\n"
-"* Customized: ¶éҤسÃÙé¨Ñ¡ Linux ´Õ ¤Ø³ÊÒÁÒöàÅ×Í¡¡ÒÃŧẺ\n"
-" (workstation, server, ËÃ×Í development)\n"
-"\n"
-"\n"
-"* Expert: ¶éҤسÁÕ¤ÇÒÁÃÙé Linux à»ç¹ÍÂèÒ§´Õ àªè¹à´ÕÂǡѺ¡ÒÃŧẺ \n"
-" customized ¤Ø³ÊÒÁÒöàÅ×͡ŧẺ workstation, server, ËÃ×Í \n"
-" development) ¤Ø³¤ÇÃÃÐÇѧÍÂèÒ§Áҡ㹡ÒÃàÅ×͡ŧÅѡɳйÕé\n"
-" ¶éҤسäÁèá¹è㨡ÃسÒàÅ×͡ŧÇÔ¸ÕÍ×è¹"
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"¤Ø³¨ÐµéͧºÍ¡ãËé·ÃÒºÇèҤسµéͧ¡ÒÃãÊè¢éÍÁÙÅ\n"
-"·Õèà¡ÕèÂÇ¢éͧ¡Ñº¡ÒúٵÅչء«ìäÇé·Õèã´\n"
-"\n"
-"\n"
-"¶éҤسäÁè·ÃÒºÇèҤس¨Ðµéͧ·ÓÍÂèÒ§äà â»Ã´àÅ×Í¡ \"à«ç¡àµÍÃìáá¢Í§ä´ÃÇì (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX ¨Ð¾ÂÒÂÒÁËÒ PCI SCSI adapter(s)  ¶éÒ DrakX\n"
-"ËÒà¨Í SCSI adapter áÅÐÃÙéÇèÒ¤ÇÃãªéä´ÃìàÇÍÃìÍÐäà Áѹ¡ç¨Ð\n"
-"¶Ù¡µÔ´µÑé§â´ÂÍÍâµàÁµÔ¡\n"
-"\n"
-"\n"
-"¶éҤسÁÕ SCSI adapter ISA adapter ËÃ×Í PCI SCSI adapter ·Õè DrakX\n"
-"äÁèÊÒÁÒöËÒà¨Í  ¤Ø³¨Ðâ´¹¶ÒÁÇèÒÁÕ  SCSI adapter ã¹à¤Ã×èͧ¢Í§¤Ø³\n"
-"ËÃ×ÍäÁè  ¶éÒäÁèÁÕ¡Ãسҡ´·Õè \"äÁè\"  áµè¶éҤس¡´Å§·Õè  \"äªè\" ¤Ø³¨ÐµéͧàÅ×Í¡\n"
-"ª¹Ô´¢Í§ adapter ·Õè¤Ø³ÁÕÍÂÙè\n"
-"\n"
-"\n"
-"¶éҤسà»ç¹¤¹àÅ×Í¡ Adapter àͧ DrakX ¨Ð¶ÒÁÇèҤس¨Ð»é͹¢éÍÁÙÅ\n"
-"Option ËÃ×ÍäÁè  ¶Ö§µÃ§¹Õé¤Ø³¤ÇèÐãËé DrakX ¤é¹ËÒ option ·ÕèàËÁÒÐÊÁ\n"
-"«Öè§â´Â·ÑèÇä»Áѹ¨ÐÊÒÁÒöËÒä´éàͧÍÂèÒ§¶Ù¡µéͧ\n"
-"\n"
-"\n"
-"áµè¶éÒäÁèÊÓàÃ稤س¨Óà»ç¹·Õè¨ÐµéͧãËé¢éÍÁÙÅ Option àͧ  ¤Ø³¤ÇÃËÒ¢éÍÁÙÅà¾ÔèÁ\n"
-"àµÔÁä´é¨Ò¡¤ÙèÁ×Í (º··Õè 3 µÍ¹ Collective informations on your hardware ) ËÃ×Í \n"
-"¨Ò¡ Web Site ¢Í§¼Ùé¼ÅÔµ ËÃ×Í ¨Ò¡ Microsoft Windows ¶éҤسÁÕµÔ´µÑé§"
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"àÅ×Í¡ harddisk ·Õèµéͧ¡ÒÃźáÅÐŧ Mandrake Linux\n"
-"¤ÇÃÃÐÇѧà»ç¹ÍÂèÒ§ÁÒ¡´¾ÃÒÐÇèÒ¢éÍÁÙÅ·Ø¡ÍÂèÒ§¨Ð¶Ù¡Åº\n"
-"áÅШÐäÁèÊÒÁÒö¡Ùé¤×¹ä´é"
-
-#: ../../help.pm_.c:832
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"¡´ \"OK\" ¶éҤسµéͧ¡ÒÃź¢éÍÁÙÅ·Ñé§ËÁ´º¹ harddisk ¹Õé\n"
-"¹ÕèÃÇÁ¶Ö§ partitions ·Ñé§ËÁ´«Öè§ÃÇÁ¶Ö§ Windows ´éÇÂ\n"
-"\n"
-"\n"
-"¡´ \"¡àÅÔ¡\" à¾×èÍ¡àÊÔ¡¡Ò÷ӧҹ¹Õé"
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "ãËéãÊèá¼è¹¿ÅéÍ»»Õé·Õè format Ẻ FAT ŧã¹ä´ÃÇì %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "èá¼è¹¿ÅéÍ»»Õé¹Õé äÁèãªè ẺFAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "ÁջѭËҡѺ¡ÒÃÍèÒ¹¢éÍÁÙÅã¹ä¿Åì %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "µ¡Å§"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"hardware ºÒ§ª¹Ô´µéͧ¡Òà driver ¾ÔàÈÉ\n"
-"¤Ø³ÊÒÁÒöËÒ¢éÍÁÙÅä´é¨Ò¡: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"¤Ø³µéͧÁÕ root ¾ÒÃìµÔªÑè¹\n"
-"à¾ÃÒЩ¹Ñ鹤سµéͧÊÃéÒ§ ¾ÒÃìµÔªÑè¹ (ËÃ×Í¡´àÅ×Í¡Íѹ·ÕèÁÕÍÂÙè)\n"
-"ËÅѧ¨Ò¡¹Ñé¹àÅ×Í¡ ``Mount Point'' áÅШѴãËéÁѹà»ç¹ `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "¤Ø³¨ÐµéͧÁÕ¾ÒÃìµÔªÑè¹ÊÇÍ»"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"¤Ø³äÁèÁÕÊÇÍ»¾ÒÃìµÔªÑè¹àÅÂ\n"
-"\n"
-"µéͧ¡ÒèзӵèÍËÃ×ÍäÁè?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "¤Ø³¨ÐµéͧÁÕ¾ÒÃìµÔªÑè¹ÊÇÍ»"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "ãªé¾×é¹·Õè·ÕèÇèÒ§"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "äÁèÁÕ¾×é¹·Õèà¾Õ§¾ÍÊÓËÃѺ ¾ÒÃìµÔªÑè¹ ãËÁè"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "ãªé¾ÒÃìµÔªÑè¹·ÕèÁÕÍÂÙè"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "äÁèÁÕ¾ÒÃìµÔªÑè¹·ÕèÁÕÍÂÙè·Õèãªé§Ò¹ä´é"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "ãªé windows partion ÊÓËÃѺ¡Òà Loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "¾ÒÃìµÔªÑè¹ã˹·Õè·èÒ¹µéͧ¡ÒÃãªé¡Ñº Linux4Win"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "àÅ×Í¡¢¹Ò´"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "¢¹Ò´¢Í§¾ÒÃìµÔªÑè¹ÃÙ· MB:"
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "¢¹Ò´¾ÒÃìµÔªÑè¹ Swapà»ç¹ MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "ãªé¾×é¹·Õè·ÕèÇèҧ㹠Windows partition"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "¾ÒÃìµÔªÑè¹ä˹·Õè¤Ø³µéͧ¡ÒÃà»ÅÕè¹¢¹Ò´"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "¤Ó¹Ç³¢Íºà¢µ¢Í§Ãкºä¿Åì Windows"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"µÑÇà»ÅÕè¹¢¹Ò´äÁèÊÒÁÒö·Ó§Ò¹¡Ñº partition ¢Í§¤Ø³\n"
-"ÁÕ¢éͼԴ¾ÅÒ´¹Õéà¡Ô´¢Öé¹: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Windows partition ¢Í§¤Ø³¡ÃШѴ¡ÃШÒÂÁÒ¡à¡Ô¹ä» ¡ÃØ³Ò Defrag ¡è͹"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ÃÐÇѧ!\n"
-"DrakX ¡ÓÅѧ¨ÐÅ´¢¹Ò´¾ÒÃìµÔªÑ蹢ͧ windows ¡Ò÷ӧҹ¹ÕéÍѹµÅÒÂÁÒ¡\n"
-"¶éҤسÂѧäÁèà¤Â·ÓÁÒ¡è͹¤Ø³¤ÇÃÍÍ¡¨Ò¡¡Ò÷ӧҹ¹ÕéáÅÐÃѹ Scandisk º¹\n"
-"Windows (áÅÐ defrag) áÅéǤèÍÂàÃÔèÁ·Ó§Ò¹¹ÕéãËÁè  áÅФسÊÁ¤Ç÷Õè¨Ð·Ó¡ÒÃ\n"
-"Backup ¢éÍÁÙÅÊӤѭ¢Öé¹ÁÒ¡è͹\n"
-"àÁ×èͤسá¹èã¨áÅéÇ ¡´ OK"
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "¤Ø³µéͧ¡ÒÃà¡çº Windows äÇéã¹¢¹Ò´ã˹"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "¾ÒÃìµÔªÑè¹ %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "¡ÒáÓ˹´¢¹Ò´ FAT à¡Ô´¡ÒüԴ¾ÅÒ´: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr "äÁèÁÕ ¾ÒÃìµÔªÑè¹ FAT à¾×èÍ·Ó¡ÒÃà»Õè¹¢¹Ò´ËÃ×ÍãËéãªéà»ç¹ loopback (¾×é¹·ÕèäÁè¾Í)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "ź disk ·Ñé§ËÁ´"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "ź Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "¤Ø³ÁÕ harddisk ÁÒ¡¡ÇèÒ  1 µÑÇ  ¤Ø³µéͧ¡ÒÃŧ linux º¹ harddisk µÑÇã˹"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "¢éÍÁÙÅ·Ñé§ËÁ´ã¹¾ÒÃìµÔªÑè¹·Ñé§ËÁ´¨ÐÊÙ­ËÒÂä» %s"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "¡ÓÅѧ¾ÒÃìµÔªÑè¹ Custom disk"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "ãªé fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"¤Ø³ÊÒÁÒö¾ÒÃìµÔªÑè¹ %s à´ÕëÂǹÕé\n"
-"àÁ×èÍàÊÃç¨áÅéÇÍÂèÒÅ×ÁºÑ¹·Ö¡â´Âãªé `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "¤Ø³äÁèÁÕ¾×é¹·Õèà¾Õ§¾Íã¹¾ÒÃìµÔªÑè¹ Windows!"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "¼ÁäÁèÊÒÁÒöËÒ¾×é¹·ÕèÇèÒ§à¾×èÍ·Ó¡ÒõԴµÑé§"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "The DrakX Partitioning wizard à¨Í·Ò§àÅ×Í¡´Ñ§µèÍ仹Õé"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "¡Ò÷ӾÒÃìµÔªÑè¹ÅéÁàËÅÇ: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Ãкºà¹çµàÇÔÃì¡¡ÓÅѧ¨Ð·Ó§Ò¹"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Ãкºà¹çµàÇÔÃì¡¡ÓÅѧ¨ÐËÂØ´·Ó§Ò¹"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"ÁÕ¤ÇÒÁ¼Ô´¾ÅÒ´à¡Ô´¢Öé¹ áµèâ»Ãá¡ÃÁäÁèÊÒÁÒöá¡éä¢ä´é\n"
-"ËÒ¡·Ó§Ò¹µèÍÍÒ¨à¡Ô´¤ÇÒÁàÊÕÂËÒÂä´é"
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "·Ó«éӨشàÁéÒ·ì %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"á¾ç¡à¡¨ÊӤѭºÒ§ÍÂèÒ§äÁèä´é¶Ù¡µÔ´µÑé§ÍÂèÒ§àÃÕºÃéÍÂ\n"
-"cdrom ËÃ×Í cdrom drive ¢Í§¤Ø³ÍÒ¨ÁÕ¡ÒÃàÊÕÂËÒÂ\n"
-"¡ÃسҵÃǨÊͺ cdrom ã¹à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì·ÕèÁÕ¡ÒõԴµÑé§áÅéÇ\n"
-"â´Âãªé \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "ÂÔ¹´Õµé͹ÃѺÊÙè %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "äÁèÁÕä´ÃÇì¿ÅéÍ»»ÕçàËÅ×ÍÍÂÙè"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "à¢éÒÊÙè¢Ñ鹵͹ `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "àÅ×Í¡¢¹Ò´·Õè¤Ø³µéͧ¡ÒõԴµÑé§"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "¢¹Ò´ÃÇÁ: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "àÇÍÃìªÑè¹: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "¢¹Ò´: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "àÅ×Í¡á¾ç¤à¡ç¨·Õè¤Ø³µéͧ¡ÒõԴµÑé§"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "¢éÍÁÙÅ"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "µÔ´µÑé§"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "¡ÓÅѧµÔ´µÑé§"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "â»Ã´ÃÍÊÑ¡¤ÃÙè"
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "àÇÅÒ·ÕèàËÅ×Í "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "àÇÅÒ·Ñé§ËÁ´ "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "¡ÓÅѧàµÃÕÂÁ¡ÒõԴµÑé§"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "¡ÓÅѧµÔ´µÑé§á¾ç¤à¡ç¨ %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "·Ó§Ò¹µèÍËÃ×ÍäÁè?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "ÁջѭËÒ¡ÒÃÅӴѺ¢Í§á¾ç¤à¡ç¨:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "ãªé¤Í¹¿Ô¡·ÕèÁÕÍÂÙèáÅéǢͧÃкº X11 ËÃ×ÍäÁè?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"à¤Ã×èͧ¢Í§¤Ø³ÁÕ·ÃѾÂҡäè͹¢éÒ§µèӤسÍÒ¨ÁջѭËÒµÔ´µÑé§ \n"
-"Mandrake Linux  ¶éÒà»ç¹àªè¹¹Ñé¹ ¡Ãسҷ´ÅͧµÔ´µÑé§áºº text \n"
-"¡Ãسҡ´ F1 ¢³Ð boot ¨Ò¡ cdrom áÅéǾÔÁ¾ì text"
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "»ÃÐàÀ·¢Í§¡ÒõԴµÑé§"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "¡ÃسÒàÅ×Í¡ 1 ã¹ÇÔ¸Õ¡ÒõԴµÑ駴ѧµèÍ仹Õé"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "¢¹Ò´ÃÇÁ¢Í§ËÁÇ´·Õè¤Ø³àÅ×Í¡à¾×è͵ԴµÑé§ÁÕ¢¹Ò´»ÃÐÁÒ³ %d MB \n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"¶éҤسµéͧ¡ÒõԴµÑ駹éÍ¡ÇèÒ¢¹Ò´¹Õé\n"
-"¡ÃسÒàÅ×Í¡à»ÍÃìà«ç¹¡ÒõԴµÑ駷Õèµéͧ¡ÒÃ\n"
-"\n"
-"à»ÍÃìà«ç¹·ÕèµèÓ¹Ñé¹ËÁÒ¶֧ᾡࡨ·ÕèÊӤѭ·ÕèÊØ´à·èÒ¹Ñé¹\n"
-"·Õè¨Ð¶Ù¡µÔ´µÑé§\n"
-"100%% ËÁÒ¶֧·Ø¡ÍÂèÒ§¨Ð¶Ù¡µÔ´µÑé§"
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"¤Ø³ÁÕ¾×é¹·Õèá¤è %d%% ¢Í§á¾¡à¡¨\n"
-"\n"
-"¶éҤسµéͧ¡ÒõԴµÑ駹éÍ¡ÇèÒ¹Õé\n"
-"àÅ×Í¡à»ÍÃìà«ç¹¡ÒõԴµÑ駷Õè¤Ø³µéͧ¡ÒÃ\n"
-"à»ÍÃìà«ç¹·ÕèµèÓ¹Ñé¹ËÁÒ¶֧ᾡࡨ·ÕèÊӤѭ·ÕèÊØ´à·èÒ¹Ñé¹\n"
-"·Õè¨Ð¶Ù¡µÔ´µÑé§\n"
-"à»ÍÃìà«ç¹ %d%% ¨Ð·Ó¡ÒõԴµÑé§á¾¡à¡¨ÁÒ¡·ÕèÊØ´à·èÒ·Õè¨Ð·Óä´é"
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "¤Ø³¨ÐµéͧàÅ×Í¡ãËé¶Ù¡µéͧÁÒ¡¢Öé¹ã¹¢Ñ鹵͹¶Ñ´ä» "
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "à»ÍÃìà«ç¹¡ÒõԴµÑé§á¾ç¤à¡ç¨"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "àÅ×Í¡¡ÅØèÁá¾ç¤à¡ç¨"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Individual package selection"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "¢¹Ò´ÃÇÁ: %d / %d MB "
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "á¾ç¤à¡ç¨ªÓÃØ´"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "ª×èÍ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "¤ÇÒÁÊӤѭ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "¤Ø³äÁèÊÒÁÒöàÅ×Í¡ package ¹Õéà¹×èͧ¨Ò¡¤Ø³ÁÕ¾×é¹·ÕèäÁèà¾Õ§¾Í"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "á¾ç¤à¡ç¨àËÅèÒ¹Õé¡ÓÅѧ¨Ð¶Ù¡µÔ´µÑé§"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "á¾ç¤à¡ç¨àËÅèÒ¹Õé¡ÓÅѧ¨Ð¶Ù¡Åº"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "¤Ø³äÁèÊÒÁÒöàÅ×Í¡/äÁèàÅ×͡ᾡࡨ¹Õé"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "¹Õè¤×Íᾡࡨ·ÕèµéͧµÔ´µÑé§ äÁèÊÒÁÒöäÁèàÅ×Í¡"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "¤Ø³äÁèÊÒÁÒöäÁèàÅ×͡ᾡࡨ¹Õéà¾ÃÒÐÁѹä´é¶Ù¡µÔ´µÑé§ä»áÅéÇ"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"ᾡࡨ¹Õé¨Óà»ç¹µéͧ¶Ù¡ upgrade\n"
-"¤Ø³á¹èã¨ÇèÒ¨ÐäÁèàÅ×Í¡ÁѹËÃ×Í"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "¤Ø³äÁèÊÒÁÒöäÁèàÅ×͡ᾡࡨ¹Õé  Áѹ¨Óà»ç¹·Õè¨Ðµéͧ¶Ù¡ upgrade"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:460
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "ºÑ¹·Ö¡Å§á¼è¹¿ÅéÍ»»Õé"
-
-#: ../../install_steps_gtk.pm_.c:461
-#, fuzzy
-msgid "Updating package selection"
-msgstr "ºÑ¹·Ö¡¡ÅØèÁá¾ç¤à¡ç¨·ÕèàÅ×Í¡"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Minimal install"
-msgstr "ÍÍ¡¨Ò¡¡ÒõԴµÑé§"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "¡ÒûÃÐàÁÔ¹"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "¡ÓÅѧàµÃÕÂÁ¡ÒõԴµÑé§"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "á¾ç¤à¡ç¨ %d ªØ´"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "ÂÍÁÃѺ"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "äÁèÂÍÁÃѺ"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"à»ÅÕè¹  CD-ROM\n"
-"\n"
-"¡ÃسÒãÊè CD-ROM \"%s\" áÅС´ OK\n"
-"¶éèҤسäÁèÁÕ ¡Ãسҡ´ ¡àÅÔ¡ (cancel) à¾×èÍËÅÕ¡àÅÕ觡ÒõԴµÑ駨ҡ CD-ROM ¹Õé"
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "ÁջѭËÒ¡ÒõԴµÑ駢ͧá¾ç¤à¡ç¨:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "ÁջѭËÒà¡Ô´¢Öé¹"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "License agreement"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "¤ÕÂìºÍÃì´"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "¤Ø³µéͧ¡ÒÃàÅ×Í¡¤ÕÂìºÍÃì´àÅÂìàÍéÒ·ìẺ㴠"
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "µèÍ仹Õé¤×Í keyboard ·Õèãªéä´é"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "¤Ø³µéͧ¡ÒõԴµÑ駻ÃÐàÀ·ã´"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "µÔ´µÑé§/ÍѾà¡Ã´ "
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "¹Õèà»ç¹¡ÒõԴµÑé§ËÃ×Í¡ÒÃÍѾà¡Ã´"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Ẻá¹Ð¹Ó (Recommended)"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Ẻ¼ÙéàªÕèÂǪҭ (Expert)"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Update"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "¤Ø³ÁÕàÁéÒÊ쪹Դã´"
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "¾ÍÃ쵢ͧàÁéÒÊì"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "àÁéÒÊì¢Í§¤Ø³µèÍà¢éҡѺ¾ÍÃìµÍ¹Ø¡ÃÁã´"
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "¡ÓÅѧ¤Í¹¿Ô¡¡ÒÃì´ PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "¤Í¹¿Ô¡ IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "äÁèÁÕ¾ÒÃìµÔªÑè¹àËÅ×Í"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Scanning partitions to find mount points"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "àÅ×Í¡¨Ø´àÁéÒ·ì"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"¼ÁäÁèÊÒÁÒöÍèÒ¹µÒÃÒ§¾ÒÃìµÔªÑè¹ä´é ÁѹàÊÕÂËÒÂÁÒ¡à¡Ô¹ä» \n"
-"¼ÁÊÒÁÒö¾ÂÒÂÒÁź¢éÍÁÙÅ¢éÍÁÙÅã¹¾ÒÃìµÔªÑè¹·ÕèàÊÕÂËÒÂ\n"
-"ÍÕ¡·Ò§àÅ×Í¡¤×ÍäÁèãËé DrakX ·Ó¡ÒÃà»ÅÕè¹á»Å§µÒÃÒ§\n"
-"¢éͤÇÒÁ¼Ô´¾ÅÒ´¤×Í %s\n"
-"\n"
-"¤Ø³á¹èã¨ÇèÒ¨ÐÂÍÁãËé¾ÒÃìµÔªÑè¹·Ñé§ËÁ´¶Ù¡Åºä»\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"´ÔÊ¡ìà´Ã¡ ÅéÁàËÅÇ·Õè¨ÐÍèÒ¹µÒÃÒ§¾ÒÃìµÔªÑè¹ãËé¶Ù¡µéͧ\n"
-"¶éÒ·Ó§Ò¹µèÍÍÒ¨ÁÕ¢éͼԴ¾ÅÒ´ä´é!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:349
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "àÅ×Í¡¾ÒÃìµÔªÑè¹·Õè¤Ø³µéͧ¡ÒÿÍÃìáÁµ"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "¾ÒÃìµÔªÑè¹ÃÙ·"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "¾ÒÃìµÔªÑè¹ã´à»ç¹ÃÙ·¾ÒÃìµÔªÑè¹ (/) ã¹Ãкº¢Í§¤Ø³"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "¤Ø³µéͧ·Ó¡ÒÃÃÕºÙµÃкºãËéà¤Ã×èͧÃѺ·ÃÒº¡ÒÃà»ÅÕè¹á»Å§µÒÃÒ§¾ÒÃìµÔªÑè¹"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "àÅ×Í¡¾ÒÃìµÔªÑè¹·Õè¤Ø³µéͧ¡ÒÿÍÃìáÁµ"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "µÃǨÊͺ bad blocks"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "¿ÍÃìáÁµ¾ÒÃìµÔªÑè¹"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "¡ÓÅѧÊÃéÒ§áÅÐ format ä¿Åì %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "äÁèÁÕ¾×é¹·ÕèÊÇÍ»à¾Õ§¾Í¡Ñº¡ÒõԴµÑé§ â»Ã´à¾ÔèÁà¹×éÍ·Õè"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "¡ÓÅѧËÒá¾ç¤à¡ç¨·ÕèÁÕÍÂÙè"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "¡ÓÅѧËÒá¾ç¤à¡ç¨·Õè¨Ð·Ó¡ÒÃÍѾà¡Ã´"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "à¤Ã×èͧ¢Í§¤Ø³äÁèÁÕà¹×éÍ·Õèà¾Õ§¾Í㹡ÒõԴµÑé§ËÃ×Í upgrade (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "·ÓàÊÃç¨ (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "¢Ñé¹µèÓ (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Ẻá¹Ð¹Ó (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Ẻ»ÃѺá¡éä´é (Customized) "
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:525
-#, fuzzy
-msgid "Load from floppy"
-msgstr "àÃÕ¡¤×¹¨Ò¡á¼è¹¿ÅéÍ»»Õé"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "àÃÕ¡¤×¹¨Ò¡á¼è¹¿ÅéÍ»»Õé"
-
-#: ../../install_steps_interactive.pm_.c:527
-#, fuzzy
-msgid "Package selection"
-msgstr "àÅ×Í¡¡ÅØèÁá¾ç¤à¡ç¨"
-
-#: ../../install_steps_interactive.pm_.c:532
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "ãËéãÊèá¼è¹¿ÅéÍ»»Õéŧã¹ä´ÃÇì %s"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "ºÑ¹·Ö¡Å§á¼è¹¿ÅéÍ»»Õé"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"¶éҤسÁÕ CD ·Ø¡ÍÂèÒ§ ¡´ OK\n"
-"¶éÒäÁèÁÕàÅ ¡´ ¡àÅÔ¡ (cancel)\n"
-"¶éÒÁÕá¤èºÒ§á¼è¹ àÅ×Í¡à·èÒ·ÕèÁÕáÅéÇ¡´ OK"
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom labeled \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"¡ÓÅѧµÔ´µÑé§á¾ç¤à¡ç¨ %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "¡Òä͹¿Ô¡ËÅѧ¡ÒõԴµÑé§"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "ãËéãÊèá¼è¹¿ÅéÍ»»Õéŧã¹ä´ÃÇì %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "ãËéãÊèá¼è¹¿ÅéÍ»»Õéŧã¹ä´ÃÇì %s "
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "àÅ×Í¡ÁÔÅàÃÍÃì䫵ì·Õè¨Ðãªé㹡ÒôÒǹìâËÅ´á¾ç¤à¡ç¨"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "¡ÓÅѧµÔ´µè͡ѺÁÔÅàÃÍÃì䫵ìà¾×èÍËÒÃÒ¡Òâͧá¾ç¤à¡ç¨·ÕèÁÕãËé"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "àÅ×Í¡á¾ç¤à¡ç¨·Õè¤Ø³µéͧ¡ÒõԴµÑé§ "
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "¤Ø³ãªéÂèÒ¹àÇÅÒã´? "
-
-#: ../../install_steps_interactive.pm_.c:813
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "¤Ø³µéͧ¡ÒÃãËéà«çµ¹ÒÌÔ¡ÒÎÒÃì´áÇÃìà»ç¹ GMT?"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:821
-#, fuzzy
-msgid "NTP Server"
-msgstr "à«ÔÃì¿àÇÍÃì NIS"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Remote CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "äÁèÁÕà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "ÃÇÁ¤ÇÒÁ"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Mouse"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "⫹àÇÅÒ"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDN card"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Sound card"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV card"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-#, fuzzy
-msgid "NIS"
-msgstr "ãªé NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-#, fuzzy
-msgid "Local files"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìâŤÍÅ (µè͵Դ¡ÑºµÑÇà¤Ã×èͧ)"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "à«çµÃËÑʼèÒ¹ÃÙ·"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "äÁèÁÕÃËÑʼèÒ¹"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "ÃËÑÊÅѺ§èÒÂà¡Ô¹ä» (µéͧÁÕÍÂèÒ§¹éÍ %d µÑÇÍÑ¡ÉÃ)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "¡ÒõÃǨÊͺÊÔ·¸Ôì¡ÒÃãªé§Ò¹"
-
-#: ../../install_steps_interactive.pm_.c:949
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "¡ÒõÃǨÊͺÊÔ·¸Ôì¡ÒÃãªé§Ò¹"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:951
-#, fuzzy
-msgid "LDAP Server"
-msgstr "à«ÔÃì¿àÇÍÃì NIS"
-
-#: ../../install_steps_interactive.pm_.c:957
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "¡ÒõÃǨÊͺÊÔ·¸Ôì¡ÒÃãªé§Ò¹¢Í§ NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "â´àÁ¹ NIS"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "à«ÔÃì¿àÇÍÃì NIS"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"ºÙµ´ÔÊ¡ìẺá¡éä¢ä´éµÒÁ¤ÇÒÁµéͧ¡Òâͧ¼Ùéãªé ¨ÐªèÇÂãËé¤Ø³ÊÒÁÒöºÙµÃкºÅչء«ì\n"
-"äÁèµéͧà¢éÒÊÙè¡Ãкǹ¡ÒâͧºÙµâËÅ´à´ÍÃìµÒÁ»¡µÔ «Ö觨Ðà»ç¹»ÃÐ⪹ìÁÒ¡ËÒ¡¤Ø³\n"
-"äÁèä´éµÔ´µÑé§ LILO ŧã¹Ãкº¢Í§¤Ø³ ËÃ×ÍËÒ¡ LILO ¶Ù¡ÅºÍÍ¡ä»à¹×èͧ¨Ò¡ÁÕ¡ÒÃ\n"
-"Ãкº»¯ÔºÑµÔ¡ÒÃẺÍ×è¹æ ËÃ×Í LILO äÁè·Ó§Ò¹¡Ñº¡Òä͹¿Ô¡ÎÒÃì´áÇÃì á¼è¹ºÙµ´ÔÊ¡ì\n"
-"¨ÐÊÒÁÒöãªé¡ÑºÍÔÁàÁ¨¡Ùé¤×¹Ãкº¢Í§áÁ¹à´Ãç¡ «Ö觨ЪèÇÂãËé¤Ø³ÊÒÁÒö·Ó¡ÒáÙé\n"
-"¤×¹Ãкº¨Ò¡¤ÇÒÁ¼Ô´¾ÅÒ´ä´é´éÇ ¤Ø³µéͧ¡ÒèÐÊÃéÒ§á¼è¹ºÙµËÃ×ÍäÁè?\n"
-"¶éÒãªè ¡ÃسÒãÊèá¼è¹ Diskette áÅС´ \"OK\""
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Floppy Drive à¤Ã×èͧáá"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Floppy Drive à¤Ã×èͧ·ÕèÊͧ"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "¢éÒÁä»"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"ºÙµ´ÔÊ¡ìẺá¡éä¢ä´éµÒÁ¤ÇÒÁµéͧ¡Òâͧ¼Ùéãªé ¨ÐªèÇÂãËé¤Ø³ÊÒÁÒöºÙµÃкºÅչء«ì\n"
-"äÁèµéͧà¢éÒÊÙè¡Ãкǹ¡ÒâͧºÙµâËÅ´à´ÍÃìµÒÁ»¡µÔ «Ö觨Ðà»ç¹»ÃÐ⪹ìÁÒ¡ËÒ¡¤Ø³\n"
-"äÁèä´éµÔ´µÑé§ LILO ŧã¹Ãкº¢Í§¤Ø³ ËÃ×ÍËÒ¡ LILO ¶Ù¡ÅºÍÍ¡ä»à¹×èͧ¨Ò¡ÁÕ¡ÒÃ\n"
-"Ãкº»¯ÔºÑµÔ¡ÒÃẺÍ×è¹æ ËÃ×Í LILO äÁè·Ó§Ò¹¡Ñº¡Òä͹¿Ô¡ÎÒÃì´áÇÃì á¼è¹ºÙµ´ÔÊ¡ì\n"
-"¨ÐÊÒÁÒöãªé¡ÑºÍÔÁàÁ¨¡Ùé¤×¹Ãкº¢Í§áÁ¹à´Ãç¡ «Ö觨ЪèÇÂãËé¤Ø³ÊÒÁÒö·Ó¡ÒáÙé\n"
-"¤×¹Ãкº¨Ò¡¤ÇÒÁ¼Ô´¾ÅÒ´ä´é´éÇ ¤Ø³µéͧ¡ÒèÐÊÃéÒ§á¼è¹ºÙµËÃ×ÍäÁè? "
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "¢ÍÍÀÑ äÁèÁÕ¿ÅéÍ»»Õéä´ÃÇìàÅÂ"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "ãËéàÅ×Í¡¿ÅéÍ»»Õéä´ÃÇì·Õè¤Ø³µéͧ¡Ò÷Óà»ç¹á¼è¹ºÙµ"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "ãËéãÊèá¼è¹¿ÅéÍ»»Õéŧã¹ä´ÃÇì %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "¡ÓÅѧÊÃéÒ§á¼è¹ºÙµ"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "¡ÓÅѧàµÃÕÂÁºÙµâËÅ´à´ÍÃì"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "¤Ø³µéͧ¡ÒÃãªé aboot ËÃ×ÍäÁè"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"¡ÒõԴµÑé§ aboot ÅéÁàËÅÇ\n"
-"¾ÂÒÂÒÁµÔ´µÑ駶֧áÁé¾ÒµÔªÑè¹ááÍÒ¨¨ÐàÊÕÂËÒÂ?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "µÔ´µÑ駺ٵâËÅ´à´ÍÃì"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "¡ÒõԴµÑé§ bootloader ÅéÁàËÅÇ µèÍ仹Õéà»ç¹¢éͼԴ¾ÅÒ´·Õèà¡Ô´¢Öé¹"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "µèÓ"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "»Ò¹¡ÅÒ§"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "ÊÙ§"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "àÅ×Í¡ÃдѺÃкºÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑÂ"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "ãËéãÊèá¼è¹¿ÅéÍ»»Õéŧã¹ä´ÃÇì %s "
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "¡ÓÅѧàµÃÕÂÁ¡ÒõԴµÑé§Å§º¹ floppy"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"¢Ñ鹵͹ºÒ§¢Ñ鹵͹äÁèÊÁºÙóì\n"
-"\n"
-"¤Ø³µéͧ¡ÒÃÍÍ¡¨Ò¡¡ÒõԴµÑ駨ÃÔ§æËÃ×ÍäÁè?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"¢ÍáÊ´§¤ÇÒÁÂÔ¹´Õ ¡ÒõԴµÑé§àÊÃç¨àÃÕºÃéÍÂ\n"
-"ãËéàÍÒÊ×èÍ·ÕèãªéºÙµÍÍ¡¨Ò¡ä´ÃÇì (á¼è¹¿ÅéÍ»»ÕéËÃ×Í«Õ´Õ) ¡´»ØèÁÃÕà·ÔÃì¹à¾×èÍÃÕºÙµ\n"
-"\n"
-"ÊÓËÃѺ·èÒ¹·Õèµéͧ¡ÒâéÍÁÙÅÊÓËÃѺ¡ÒÃá¡é䢡Ѻ Åչء«ì-áÁ¹à´Ã¡\n"
-"â»Ã´ÍèÒ¹ Errata ä´é·Õè http://www.mandrakelinux.com/\n"
-"\n"
-"¢éÍÁÙÅÊÓËÃѺ¡Òä͹¿Ô¡Ãкº¢Í§¤Ø³ ÊÒÁÒöËÒä´é¨Ò¡ªèǧ\n"
-"º·ËÅѧ¨Ò¡¡ÒõԴµÑ駢ͧ¤ÙèÁ×Íá¹Ð¹Ó¼Ùéãªé§Ò¹Åչء«ì-áÁ¹à´Ã¡©ºÑºà»ç¹·Ò§¡ÒÃ"
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "ÊÃéÒ§floppyÊÓËÃѺ¡ÒõԴµÑé§áººÍÍâµàÁµÔ¡"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"¡ÒõԴµÑé§áººÍÍâµàÁµÔ¡ÊÒÁÒö·Ó§Ò¹áººàµçÁÃٻẺËÒ¡µéͧ¡ÒÃ\n"
-"㹡óչÑé¹Áѹ¨Ðãªé harddisk  ·Ñé§ËÁ´\n"
-"(ÁѹàËÁÒСѺ¡ÒõԴµÑ駺¹à¤Ã×èͧÍ×è¹)\n"
-"¤Ø³ÍÒ¨ÍÂÒ¡¡ÅѺä»àÃÔèÁµé¹µÔ´µÑé§ãËÁè\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Íѵâ¹ÁѵÔ"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "àÃÕ¡ÍÕ¡¤ÃÑé§"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "ºÑ¹·Ö¡¡ÅØèÁá¾ç¤à¡ç¨·ÕèàÅ×Í¡"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "¡ÒõԴµÑé§Åչء«ì-áÁ¹à´Ã¡ %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr "  <Tab>/<Alt-Tab> ÃÐËÇèÒ§µÑÇàÅ×Í¡ | <Space> àÅ×Í¡ | <F12> ˹éÒ¶Ñ´ä» "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "äÁèÁÕ kdesu "
-
-#: ../../interactive.pm_.c:132
-#, fuzzy
-msgid "Choose a file"
-msgstr "àÅ×Í¡¡Ô¨¡ÃÃÁ"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Advanced"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "â»Ã´ÃÍÊÑ¡¤ÃÙè"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "¢ÂÒ tree"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "导 tree"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "à»ÅÕè¹ä»ÁÒÃÐËÇèÒ§¡ÒèѴàÃÕ§Ẻ flat ËÃ×Í group"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "à¡Ô´¢é͢ѴáÂé§ (%s), â»Ã´àÅ×Í¡ãËé¶Ù¡µéͧ\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "µÑÇàÅ×Í¡¼Ô´¾ÅÒ´ â»Ã´·´ÅͧÍÕ¡¤ÃÑé§\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (¤èÒµÑé§µé¹ %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "µÑÇàÅ×Í¡¢Í§¤Ø³? (¤èÒµÑé§µé¹ %s)"
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "µÑÇàÅ×Í¡¢Í§¤Ø³? (¤èÒµÑé§µé¹ %s ãËéãÊè `none' à¾×è͵ÑÇàÅ×Í¡ÇèÒ§) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "તâ¡ÊâÅÇÒà¡Õ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "àÂÍÃÁѹ"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Ê໹"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "¿Ô¹áŹ´ì"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "½ÃÑè§àÈÉ"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "¹ÍÃìàÇÂì"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "â»áŹ´ì"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "ÃÑÊà«ÕÂ"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "ÊÇÕà´¹"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Íѧ¡ÄÉ"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "ÍàÁÃÔ¡Ò"
-
-#: ../../keyboard.pm_.c:159
-#, fuzzy
-msgid "Albanian"
-msgstr "Iranian"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "ÍÒÃìàÁà¹Õ¹ (à¡èÒ)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "ÍÒÃìàÁà¹Õ¹ (¾ÔÁ¾ì´Õ´)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "ÍÒÃìàÁà¹Õ¹ (â¿à¹µÔ¤)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latin)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "àºÅàÂÕèÂÁ"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "ºÑÅ¡ÒàÃÕÂ"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "ºÃÒ«ÔÅ"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Belarusian"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "ÊÇÔÊ (àÅÂìàÍéÒ·ìµÒÁàÂÍÃÁѹ)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "ÊÇÔÊ (àÅÂìàÍéÒ·ìµÒÁ½ÃÑè§àÈÉ)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "તâ¡ÊâÅÇÒà¡Õ (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "German (no dead keys)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "à´¹ÁÒÃì¡"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegian)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estonian"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "¨ÍÃìà¨Õ (àÅÂìàÍéÒ·ìẺÃÑÊà«ÕÂ)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "¨ÍÃìà¨Õ (àÅÂìàÍéÒ·ìẺÅеԹ)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "¡ÃÕ¡"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Íѧ¡ÒÃÕ"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Croatian"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "ÍÔÊÃÒàÍÅ"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "ÍÔÅÃÒàÍÅ (â¿à¹µÔ¤)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iranian"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "äÍ«ìᏴì"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "ÍÔµÒÅÕ"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japanese 106 keys"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Korean keyboard"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "ÅеԹÍàÁÃÔ¡Ò"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lithuanian AZERTY (old)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lithuanian AZERTY (new)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "ÅÔ¸ÑÇà¹Õ \"á¶ÇµÑÇàÅ¢\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "ÅÔ¸ÑÇà¹Õ \"â¿à¹µÔ¤\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-#, fuzzy
-msgid "Latvian"
-msgstr "µÓá˹è§"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Macedonian"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "ÎÍÅᏴì"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Polish (qwerty layout)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Polish (qwertz layout)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "â»ÃµØà¡Ê"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "¤Ò¹Ò´Ò (¤ÇÔ຤)"
-
-#: ../../keyboard.pm_.c:217
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "ÃÑÊà«ÕÂ (Yawerty)"
-
-#: ../../keyboard.pm_.c:218
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "ÃÑÊà«ÕÂ (Yawerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "ÃÑÊà«ÕÂ (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "ÊâÅÇÒà¹ÕÂ"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "ÊâÅÇÒà¡Õ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "ÊâÅÇÒà¡Õ (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaidjani (cyrillic)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "ä·Â"
-
-#: ../../keyboard.pm_.c:232
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "ä·Â"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "µØÃ¡Õ (âÁà´ÅẺἹ \"F\")"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "µØÃ¡Õ (âÁà´ÅÊÁÑÂãËÁè \"Q\")"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "ÂÙà¤Ã¹"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "¤ÕÂìºÍÃì´ÍàÁÃԡѹ (¹Ò¹ÒªÒµÔ)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamese \"numeric row\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "ÂÙâ¡ÊÅÒàÇÕ (àÅÂìàÍéÒ·ìẺÅеԹ)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Circular mounts %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "ź logical volume ¡è͹\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generic PS2 Wheel Mouse"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 »ØèÁ"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Generic"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Wheel"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "¾ÍÃìµÍ¹Ø¡ÃÁ"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Generic 2 Button Mouse"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "àÁéÒÊìẺ»¡µÔ·Õèãªé§Ò¹ÊÒÁ»ØèÁ"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (¾ÍÃìµÍ¹Ø¡ÃÁ, Ẻà¡èÒ C7)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 buttons"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 buttons"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "äÁèÁÕ"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "äÁèÁÕàÁéÒÊì"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "¡Ãسҷ´ÊͺàÁéÒÊì"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "à¾×èÍãËéàÁéÒÊì·Ó§Ò¹"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "àÅ×è͹Åéͧ͢¤Ø³"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "¿Ô¹áŹ´ì"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Next ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- ¡è͹"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "¶Ù¡µéͧËÃ×ÍäÁè?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "µèÍà¢éÒ Internet "
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"¡ÒõԴµèÍâ´Â·ÑèÇ仢ͧ adsl ¤×Í pppoe.\n"
-"ºÒ§¤ÃÑé§ÍÒ¨ãªé  pptp ÁÕ¹éͤ¹·Õèãªé  dhcp.\n"
-"¶éҤسäÁè·ÃÒº àÅ×Í¡ 'use pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "ãªé dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "ãªé pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "ãªé pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"ª¹Ô´¢Í§ dhcp client ·Õèµéͧ¡ÒÃãªé¤×ÍÍÐäÃ\n"
-"¡ÒÃàÅ×Í¡àº×éͧµé¹¤×Í dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"äÁ辺¡ÒÃì´ ethernet \n"
-"¼ÁäÁèÊÒÁÒö¨Ñ´·Ó¡ÒõԴµèͪ¹Ô´¹Õé"
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "àÅ×Í¡ network interface"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "¡ÃسÒàÅ×Í¡ Network Adaptor ÊÓËÃѺ¡ÒõèÍà¢éÒ Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "äÁ辺¡ÒÃì´à¹çµàÇÔÃì¡"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "¡ÓÅѧ¤Í¹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"â»Ã´ãÊèª×èͧ͢âÎʵì\n"
-"ª×èͧ͢âÎʵì¤ÇÃãÊèàµçÁÃٻẺ (ÃÇÁª×èÍâ´àÁ¹´éÇÂ)\n"
-"µÑÇÍÂèÒ§àªè¹ ``mybox.mylab.yco.com''\n"
-"¤Ø³ÍÒ¨¨ÐãÊè¤èÒ IP ¢Í§à¡µàÇÂì´éǶéҤسÁÕà¤Ã×èͧ·Õè·Ó˹éÒ·Õèà»ç¹à¡µàÇÂìÍÂÙè"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "ª×èÍâÎʵì:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Network Configuration Wizard"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "External ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Internal ISDN card"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "¡ÒõԴµèÍẺ ISDN ¢Í§¤Ø³à»ç¹áººã´"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "µÃǨ¾º¤Í¹¿Ô¡¢Í§ Firewall"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "µÃǨ¾º¤Í¹¿Ô¡¢Í§ Firewall"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "¡Òä͹¿Ô¡ ISDN"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"àÅ×Í¡¼ÙéãËéºÃÔ¡ÒÃ\n"
-"¶éÒäÁèÁÕàÅ×Í¡ äÁèÁÕ (unlisted)"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Boot Protocol"
-
-#: ../../network/isdn.pm_.c:182
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "ÂØâû (EDS11)"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Rest of the world"
-
-#: ../../network/isdn.pm_.c:184
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Rest of the world \n"
-" no D-Channel (leased lines)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Protocol ä˹·Õè¤Ø³µéͧ¡ÒÃ"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "¤Ø³ÁÕ¡ÒÃì´ª¹Ô´ã´?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "¼ÁäÁè·ÃÒº"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"¶éҤسÁÕ ¡ÒÃì´ ISA µÑÇàÅ¢ã¹Ë¹éÒµèÍ令Çèж١µéͧÍÂÙèáÅéÇ\n"
-"\n"
-"¶éҤسÁÕ¡ÒÃì´ PCMCIA ¤Ø³µéͧÃÙé irq áÅÐ io ¢Í§¡ÒÃ촢ͧ¤Ø³\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "àÅÔ¡"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "·Ó§Ò¹µèÍËÃ×ÍäÁè?"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "¤Ø³ãªé¡ÒÃì´ ISDN ã´?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr "¼Áà¨Í¡ÒÃì´ ISDN Ẻ PCI áµè¼ÁäÁè·ÃÒºª¹Ô´ ¡ÃسÒàÅ×͡˹×è§ã¹¡ÒÃì´ PCI ã¹Ë¹éÒµèÍä»"
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "äÁ辺¡ÒÃì´ ISDN PCI  ¡ÃسÒàÅ×Í¡¨Ò¡Ë¹éÒµèÍä»"
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "¤Ø³µéͧ¡ÒÃãËéâÁà´çÁ¢Í§¤Ø³µè͡Ѻ¾ÍÃìµÍ¹Ø¡ÃÁã´?"
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "ÍçÍ»ªÑ蹢ͧ¡ÒÃËÁعâ·ÃÈѾ·ì"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "ª×èÍ¡ÒÃàª×èÍÁµèÍ"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "ËÁÒÂàÅ¢â·ÃÈѾ·ì"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "ËÁÒÂàÅ¢»ÃШӵÑÇ¡ÒÃÅçÍ¡ÍÔ¹"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "ÃٻẺʤÃÔ»µì"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "ÃٻẺà·ÍÃìÁÔ¹ÍÅ"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "ª×èÍâ´àÁ¹"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "à«ÔÿìàÇÍÃì DNS à¤Ã×èͧáá (optional)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "à«ÔÿìàÇÍÃì DNS à¤Ã×èͧ·ÕèÊͧ (optional)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"¤Ø³ÊÒÁÒöàÅÔ¡µÔ´µèÍËÃ×Í·Ó¡ÒûÃѺáµè§¡ÒõԴµèͧ͢¤Ø³ãËÁè"
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"¤Ø³ÊÒÁÒö¤Í¹¿Ô¡Ãкºà¹çµàÇÔÃì¡ãËÁè"
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "¤Ø³µÔ´µè͡Ѻ Internet ÍÂÙè"
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"¤Ø³ÊÒÁÒöàª×èÍÁµèÍ Internet ËÃ×Í·Ó¡ÒÃá¡é㢡ÒÃàª×èÍÁµèÍãËÁè"
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "¤Ø³ÂѧäÁèä´éµè͡Ѻ Internet ÍÂÙè"
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "àª×èÍÁµèÍ Internet"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "¨º¡ÒÃàª×èÍÁµèÍ Internet "
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "¤Í¹¿Ô¡Ãкºà¹çµàÇÔÃì¡ (Lan ËÃ×Í Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "¡ÒÃàª×èÍÁµèÍ Internet áÅСÒûÃѺáµè§"
-
-#: ../../network/netconnect.pm_.c:96
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"¤Ø³ÊÒÁÒöàÅÔ¡µÔ´µèÍËÃ×Í·Ó¡ÒûÃѺáµè§¡ÒõԴµèͧ͢¤Ø³ãËÁè"
-
-#: ../../network/netconnect.pm_.c:105
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"¤Ø³ÊÒÁÒöàÅÔ¡µÔ´µèÍËÃ×Í·Ó¡ÒûÃѺáµè§¡ÒõԴµèͧ͢¤Ø³ãËÁè"
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "¡Òä͹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"à¹×èͧ¨Ò¡¤Ø³ãªé¡ÒõԴµÑé§áºº network Ãкº network ¨Ö§ãªéä´éÍÂÙèáÅéÇ\n"
-"¡´ OK à¾×èÍÃÑ¡ÉÒ¤èҤ͹¿Ô¡à´ÔÁäÇé ËÃ×ÍàÅ×Í¡ ¡àÅÔ¡à¾×èÍ»ÃѺáµè§ãËÁè\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"ÂÔ¹´Õµé͹ÃѺÊÙè Network Configuration Wizard\n"
-"\n"
-"àÃÒ¡ÓÅѧ¨Ð»ÃѺáµè§ internet/network \n"
-"¶éҤسäÁèµéͧ¡Òà auto detection ¡ÃسÒ¡àÅÔ¡ checkbox.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "àÅ×Í¡ profile ·Õè¨Ð»ÃѺáµè§"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "ãªé auto detection"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "¡ÓÅѧµÃǨÊͺÍØ»¡Ã³ì..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "¡ÒõԴµèÍâ´Âãªé Modem ¸ÃÃÁ´Ò"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "¤é¹ËÒà¨Íº¹ port %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "¡ÒõԴµèÍâ´Âãªé ISDN"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "¤é¹¾º %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, fuzzy
-msgid "ADSL connection"
-msgstr "LAN connection"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "¤é¹ËÒà¨Íº¹ interface %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "cable connection"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-#, fuzzy
-msgid "cable connection detected"
-msgstr "cable connection"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "LAN connection"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "ethernet card(s) ·Õ辺"
-
-#: ../../network/netconnect.pm_.c:190
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "àÅ×Í¡à¤Ã×èͧÁ×Í·Õè¤Ø³µéͧ¡ÒÃãªé"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:215
-#, fuzzy
-msgid "Internet connection"
-msgstr "¡ÒÃàª×èÍÁµè͡Ѻ Internet Ẻ sharing"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "¤Ø³µéͧ¡Òõè͵͹ boot ËÃ×ÍäÁè"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "¡Òä͹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "¤Ø³µéͧ¡ÒÃàÃÔèÁ·Ó§Ò¹ Network ãËÁèËÃ×ÍäÁè"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"¡ÒûÃѺáµè§ internet/network àÃÕºÃéÍÂáÅéÇ\n"
-"\n"
-"¤èÒµèÒ§æ¨Ð¶Ù¡¹Óä»ãªéà´ÕëÂǹÕé\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"àÁ×èÍ·Ø¡ÍÂèÒ§àÊÃç¨ÊÔé¹ ¼Áá¹Ð¹ÓãËé·èÒ¹àÃÔèÁ·Ó§Ò¹ X windows ãËÁè\n"
-"à¾×èÍ»éͧ¡Ñ¹»Ñ­ËÒ hostname ·ÕèÍÒ¨à¡Ô´¢Öé¹ä´é"
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"¤Óàµ×͹: ÍØ»¡Ã³ì¹Õéä´é¶Ù¡»ÃѺáµè§ãËéãªé㹡ÒõèÍà¢éÒ internet\n"
-"¤Ø³ÊÒÁÒöÂÍÁÃѺ¤èÒµèÒ§æËÃ×Í·Ó¡ÒÃá¡é㢤èÒµèÒ§æ¢éÒ§ÅèÒ§¹Õé\n"
-" "
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"â»Ã´¡ÃÍ¡¢éÍÁÙÅ¡Òä͹¿Ô¡¤èÒ IP ÊÓËÃѺà¤Ã×èͧ¹Õé\n"
-"¢éÍÁÙÅáµèÅÐÍÂèÒ§ÊÒÁÒöãÊèà¢éÒä»ä´éâ´Âãªé¤èÒ IP ã¹ÃٻẺµÑÇàÅ¢¤Ñè¹´éǨش\n"
-"(dotted-decimal notation) µÑÇÍÂèÒ§àªè¹ 1.2.3.4"
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "¡ÓÅѧ¤Í¹¿Ô¡ÍØ»¡Ã³ìà¹çµàÇÔÃì¡ %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "¤èÒ IP"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "à¹çµÁÒÊ¡ì"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "¡Ó˹´¤èÒ IP ẺÍѵâ¹ÁѵÔ"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "¤èҢͧ IP ¤ÇÃÍÂÙèã¹ÃٻẺ 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"â»Ã´ãÊèª×èͧ͢âÎʵì\n"
-"ª×èͧ͢âÎʵì¤ÇÃãÊèàµçÁÃٻẺ (ÃÇÁª×èÍâ´àÁ¹´éÇÂ)\n"
-"µÑÇÍÂèÒ§àªè¹ ``mybox.mylab.yco.com''\n"
-"¤Ø³ÍÒ¨¨ÐãÊè¤èÒ IP ¢Í§à¡µàÇÂì´éǶéҤسÁÕà¤Ã×èͧ·Õè·Ó˹éÒ·Õèà»ç¹à¡µàÇÂìÍÂÙè"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "à«ÔÃì¿àÇÍÃì DNS"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "ࡵàÇÂì"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "ÍØ»¡Ã³ìࡵàÇÂì"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "¡Òä͹¿Ô¡ Proxies"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "¤èҢͧ Proxy ¤ÇèÐà»ç¹ http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "¤èҢͧ Proxy ¤ÇèÐà»ç¹ ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "¡Òä͹¿Ô¡ Internet"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "¤Ø³µéͧ¡Ò÷´ÊͺµèÍà¢éÒ Internet à´ÕëÂǹÕéËÃ×ÍäÁè"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "·´Êͺ connection..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "µÔ´µèÍà¢éÒ Internet àÃÕºÃéÍÂ"
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "à¾×èͤÇÒÁ»ÅÍ´ÀÑ Áѹ¨ÐËÂØ´¡ÒõԴµèÍà´ÕëÂǹÕé"
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"äÁèÊÒÁÒöµèÍà¢éÒ Internet \n"
-"Åͧ·Ó¡Òä͹¿Ô¡ãËÁèÍÕ¡¤ÃÑé§"
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "¡Òä͹¿Ô¡ Connection"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "¡ÃسÒàÅ×Í¡ªèͧ¢éÒ§ÅèÒ§¹Õé"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "Card IRQ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Card mem (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "Card IO"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "Card IO_0"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "Card IO_1"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "àºÍÃìâ·ÃÈѾ·ìÊèǹµÑÇ"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "ª×èͼÙéãËéºÃÔ¡Òà (ex KSC)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "ËÁÒÂàÅ¢â·ÃÈѾ·ì"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "¼ÙéãËéºÃÔ¡Òà dns 1 (optional)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "¼ÙéãËéºÃÔ¡Òà dns 2 (optional)"
-
-#: ../../network/tools.pm_.c:88
-#, fuzzy
-msgid "Choose your country"
-msgstr "àÅ×Í¡¤ÕÂìºÍÃì´"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "¡ÒÃËÁعâ·ÃÈѾ·ì´éÇÂâÁà´çÁ"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-#, fuzzy
-msgid "Connection speed"
-msgstr "ª¹Ô´¡ÒÃàª×èÍÁµèÍ"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "ª¹Ô´¡ÒÃàª×èÍÁµèÍ"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Account Login (user name)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "ÃËÑʼèÒ¹"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Extended partition not supported on this platform"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"¤Ø³ÁÕªèͧÇèҧ㹵ÒÃÒ§¾ÒÃìµÔªÑè¹  áµèâ»Ãá¡ÃÁ¨ÐäÁèãªé§Ò¹ªèͧÇèÒ§¹Ñé¹\n"
-"¡ÒÃá¡é䢻ѭËÒÊÒÁÒö·Óä´éâ´ÂÂéÒÂä¾ÃÁÒÃÕ¾ÒÃìµÔªÑè¹ à¾×èÍãËéªèͧÇèÒ仵èÍ·éÒ¾ÒÃìµÔªÑè¹áºº extended"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "¡ÒáÙé¤×¹¨Ò¡ä¿Åì %s ÅéÁàËÅÇ: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "ä¿Åìáºç¤ÍѾÁջѭËÒ"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "¢éͼԴ¾ÅÒ´¶Ù¡ºÑ¹·Ö¡ã¹ä¿Åì %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"ÁÕÊÔè§äÁè´Õà¡Ô´¢Ö鹡Ѻ disk ¢Í§¤Ø³«Öè§àÃÒäÁèÊÒÁÒöµÃǨ\n"
-"Êͺ¤ÇÒÁ¶Ù¡µéͧ¢Í§¢éÍÁÙÅä´é\n"
-"¹Ñè¹ËÁÒ¤ÇÒÁÇèÒ¡ÒÃà¢Õ¹¢éÍÁÙÅŧä»ÍÒ¨¡ÅÒÂà»ç¹¢ÂÐ"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "µéͧÁÕ"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "ÊӤѭ"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "´ÕÁÒ¡"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "´Õ"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ÍÒ¨¨Ð"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìâŤÍÅ (µè͵Դ¡ÑºµÑÇà¤Ã×èͧ)"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ·"
-
-#: ../../printer.pm_.c:42
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Remote CUPS server"
-
-#: ../../printer.pm_.c:43
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "ÃÕâÁµ lpd"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìã¹Ãкº Network (Socket)"
-
-#: ../../printer.pm_.c:45
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/ÇÔ¹â´ÇÊì 95/98/NT"
-
-#: ../../printer.pm_.c:46
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "ª×èÍà«ÔÃì¿àÇÍÃì¢Í§¾ÃÔ¹àµÍÃì"
-
-#: ../../printer.pm_.c:47
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "ÍØ»¡Ã³ìà¤Ã×èͧ¾ÔÁ¾ì URI"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(âÁ´ÙÅ %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "àÅ×Í¡¡ÒÃàª×èÍÁµè͡Ѻà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìàª×èÍÁµèÍÍÂèÒ§äÃ?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"àÇÅÒãªé CUPS SERVER ¤Ø³äÁè¨Óà»ç¹µéͧ»ÃѺáµè§à¤Ã×èͧ¾ÔÁ¾ì\n"
-"㹵͹¹Õé  à¤Ã×èͧ¾ÔÁ¾ì¨Ð¶Ù¡¤é¹ËÒàͧ\n"
-"¡Ã³ÕÁÕ¢éÍʧÊÑ ¡ÃسÒàÅ×Í¡ \"Remote CUPS server\""
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-#, fuzzy
-msgid "None"
-msgstr "·ÓàÃÕºÃéÍÂáÅéÇ"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "àÅ×Í¡¼Ùéãªé default"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-#, fuzzy
-msgid "Close"
-msgstr "Mouse"
-
-#: ../../printerdrake.pm_.c:125
-#, fuzzy
-msgid "Apply/Re-read printers"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ·"
-
-#: ../../printerdrake.pm_.c:129
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "¤èҢͧ IP ¤ÇÃÍÂÙèã¹ÃٻẺ 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Port number ¤ÇÃà»ç¹µÑÇàÅ¢"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-#, fuzzy
-msgid "Default printer"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìâŤÍÅ (µè͵Դ¡ÑºµÑÇà¤Ã×èͧ)"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "¤èÒ IP ¢Í§ CUPS à«ÔÃì¿àÇÍÃì"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:149
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Boot Style Configuration"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "¡ÓÅѧµÃǨÊͺÍØ»¡Ã³ì..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "¡ÓÅѧµÃǨÊͺ¾ÍÃìµ"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "µÃǨ¾ºà¤Ã×èͧ¾ÔÁ¾ìâÁà´Å \"%s\""
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "ÍØ»¡Ã³ìà¤Ã×èͧ¾ÔÁ¾ìâŤÍÅ"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"ÍØ»¡Ã³ì·Õèà¤Ã×èͧ¾ÔÁ¾ì¢Í§¤Ø³àª×èÍÁµèÍÍÂÙè¤×Í \n"
-"( /dev/lp0 ¨Ðà·Õºà·èҡѺ LPT1:)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "ÍØ»¡Ã³ìà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "ÍèÒ¹ CUPS drivers database..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "ÍêÍ»ªÑ蹢ͧà¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ·"
-
-#: ../../printerdrake.pm_.c:313
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"ËÒ¡¤Ø³µéͧ¡ÒÃãªé¤ÔÇà¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ· ¤Ø³¨Ðµéͧ»é͹¢éÍÁÙÅ\n"
-"¢Í§ª×èÍâÎʵì·ÕèãËéºÃÔ¡ÒÃà¤Ã×èͧ¾ÔÁ¾ì¹Ñé¹ áÅЪ×èͤÔǢͧà«ÔÃì¿àÇÍÃì¹Ñé¹\n"
-"«Öè§à»ç¹·Õèæ§Ò¹¾ÔÁ¾ì¨Ð¶Ù¡à¡çºäÇé"
-
-#: ../../printerdrake.pm_.c:316
-#, fuzzy
-msgid "Remote host name"
-msgstr "ª×èÍâÎʵìÃÕâÁ·"
-
-#: ../../printerdrake.pm_.c:317
-#, fuzzy
-msgid "Remote printer name"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ·"
-
-#: ../../printerdrake.pm_.c:320
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "ª×èÍâÎʵìÃÕâÁ·"
-
-#: ../../printerdrake.pm_.c:324
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "ª×èÍâÎʵìÃÕâÁ·"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "ÍêÍ»ªÑ蹢ͧà¤Ã×èͧ¾ÔÁ¾ìẺ SMB (à¤Ã×èͧ¾ÔÁ¾ìã¹ÃкºÇÔ¹â´ÇÊì 9x/NT)"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"à¾×èÍãËé¤Ø³ÊÒÁÒöãªéà¤Ã×èͧ¾ÔÁ¾ì SMB ä´é ¤Ø³¨ÐµéͧãÊè¢éÍÁÙŢͧª×èÍâÎʵì·Õè\n"
-"à»ç¹ SMB (â»Ã´ÊѧࡵØÇèÒ ª×èÍâÎʵìẺ SMB ÍҨᵡµèÒ§¨Ò¡ª×èÍâÎʵì\n"
-"Ẻ TCP/IP) áÅТéÍÁÙŤèÒ IP áÍ´à´Ãʢͧ¾ÃÔ¹µìà«ÔÃì¿àÇÍÃì ÃÇÁ·Ñé§\n"
-"ª×èͧ͢à¤Ã×èͧ¾ÔÁ¾ì·Õèµéͧ¡ÒÃãªé (share name) áÅЪ×èͧ͢¼Ùéãªé (username)\n"
-"ÃËÑʼèÒ¹ (password) áÅТéÍÁÙŢͧàÇÔÃ줡ÃØê» (workgroup) ´éÇÂ"
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "ª×èÍâÎʵì¢Í§ SMB server"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "¤èÒ IP ¢Í§ SMB à«ÔÃì¿àÇÍÃì"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "ª×èÍ·Õèãªé㹡ÃØê» (sharename)"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "àÇÔÃì¡¡ÃØê» (workgroup)"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "ÍêÍ»ªÑ蹢ͧà¤Ã×èͧ¾ÔÁ¾ìã¹Ãкºà¹çµáÇÃì"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"à¾×èÍãËé¤Ø³ÊÒÁÒöãªéà¤Ã×èͧ¾ÔÁ¾ìã¹Ãкºà¹çµáÇÃì ¤Ø³¨Ðµéͧ»é͹¢éÍÁÙÅ\n"
-"¢Í§ª×è;ÃÔ¹µìà«ÔÃì¿àÇÍÃìã¹Ãкºà¹çµáÇÃì (ª×èÍ·Õè»é͹à¢éÒä»ÍÒ¨äÁèãªèª×èͧ͢\n"
-"âÎʵìẺ TCP/IP) áÅТéÍÁÙŪ×èͤÔǢͧà¤Ã×èͧ¾ÔÁ¾ì·Õèµéͧ¡ÒÃãªé\n"
-"ÃÇÁ·Ñ駪×èͼÙéãªéáÅÐÃËÑʼèÒ¹´éÇÂ"
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "ª×èÍà«ÔÃì¿àÇÍÃì¢Í§¾ÃÔ¹àµÍÃì"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "ª×è;ÃÔ¹µì¤ÔÇ"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "ÍçÍ»ªÑ蹢ͧà¤Ã×èͧ¾ÔÁ¾ìâŤÍÅ"
-
-#: ../../printerdrake.pm_.c:528
-#, fuzzy
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"To print to a socket printer, you need to provide the\n"
-"hostname of the printer and optionally the port number."
-
-#: ../../printerdrake.pm_.c:533
-#, fuzzy
-msgid "Printer host name"
-msgstr "ª×èͧ͢à¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:537
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "ª×èͧ͢à¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "ÍØ»¡Ã³ìà¤Ã×èͧ¾ÔÁ¾ì URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "ª×èÍà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "ÃÒÂÅÐàÍÕ´"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "µÓá˹è§"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "ÍèÒ¹ CUPS drivers database..."
-
-#: ../../printerdrake.pm_.c:793
-#, fuzzy
-msgid "Printer model selection"
-msgstr "àÅ×Í¡¡ÒÃàª×èÍÁµè͡Ѻà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:794
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "¤Ø³ÁÕà¤Ã×èͧ¾ÔÁ¾ìª¹Ô´ã´?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "¡Òä͹¿Ô¡ Internet"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "¡Òä͹¿Ô¡ Internet"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1136
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "¤Ø³µéͧ¡ÒþÔÁ¾ì·´ÊͺËÃ×ÍäÁè?"
-
-#: ../../printerdrake.pm_.c:1152
-#, fuzzy
-msgid "Test pages"
-msgstr "¡ÓÅѧµÃǨÊͺ¾ÍÃìµ"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1158
-#, fuzzy
-msgid "No test pages"
-msgstr "ãªé ãËé¾ÔÁ¾ì¡ÃдÒÉ·´Êͺ·Ñé§ÊͧẺ"
-
-#: ../../printerdrake.pm_.c:1159
-#, fuzzy
-msgid "Print"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:1161
-#, fuzzy
-msgid "Standard test page"
-msgstr "à¤Ã×èͧÁÕÍ Standard"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "¡ÓÅѧ¾ÔÁ¾ì¡ÃдÒÉ·´Êͺ"
-
-#: ../../printerdrake.pm_.c:1169
-#, fuzzy
-msgid "Photo test page"
-msgstr "¡ÓÅѧ¾ÔÁ¾ì¡ÃдÒÉ·´Êͺ"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "¡ÓÅѧ¾ÔÁ¾ì¡ÃдÒÉ·´Êͺ"
-
-#: ../../printerdrake.pm_.c:1200
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"á¼è¹·´Êͺ¡ÒþÔÁ¾ìä´é¶Ù¡Êè§ä»·Õèà¤Ã×èͧ¾ÔÁ¾ìáÅéÇ\n"
-"¡ÃسÒÃÍÊÑ¡¤ÃÙè\n"
-"ʶҹСÒþÔÁ¾ì:\n"
-"%s\n"
-"\n"
-"Áѹ·Ó§Ò¹¶Ù¡µéͧãËÁ¤ÃѺ"
-
-#: ../../printerdrake.pm_.c:1204
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"á¼è¹·´Êͺ¡ÒþÔÁ¾ìä´é¶Ù¡Êè§ä»·Õèà¤Ã×èͧ¾ÔÁ¾ìáÅéÇ\n"
-"¡ÃسÒÃÍÊÑ¡¤ÃÙè\n"
-"Áѹ·Ó§Ò¹¶Ù¡µéͧãËÁ¤ÃѺ"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "äÁèÁÕà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Ãкºà¹çµàÇÔÃì¡¡ÓÅѧ¨ÐËÂØ´·Ó§Ò¹"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "ÍêÍ»ªÑ蹢ͧà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "ÍèÒ¹ CUPS drivers database..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "¡Òä͹¿Ô¡ Internet"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1398
-#, fuzzy
-msgid "New printer name"
-msgstr "äÁèÁÕà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "ÍèÒ¹ CUPS drivers database..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "¡Òä͹¿Ô¡"
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "·´Êͺ connection..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "¤Í¹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "äÁèÁÕ¡Òä͹¿Ô¡¨ÍÀÒ¾"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "¡ÓÅѧ¤Í¹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "»ÃÐàÀ·¢Í§¡ÒþÔÁ¾ìª¹Ô´ä˹·Õè¤Ø³µéͧ¡ÒÃ"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "ÊÙ§"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoid"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "»ÃÐàÀ·¢Í§¡ÒþÔÁ¾ìª¹Ô´ä˹·Õè¤Ø³µéͧ¡ÒÃ"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "àÅ×Í¡¡ÒÃàª×èÍÁµè͡Ѻà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:1728
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "»ÃÐàÀ·¢Í§¡ÒþÔÁ¾ìª¹Ô´ä˹·Õè¤Ø³µéͧ¡ÒÃ"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "¡Òä͹¿Ô¡à¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "ÍêÍ»ªÑ蹢ͧà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "ÍèÒ¹ CUPS drivers database..."
-
-#: ../../printerdrake.pm_.c:1845
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "¤Ø³µéͧ¡Òä͹¿Ô¡à¤Ã×èͧ¾ÔÁ¾ì´éÇÂËÃ×ÍäÁè"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "âËÁ´¸ÃÃÁ´Ò"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Default)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Remote CUPS server"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "Remote CUPS server"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-#, fuzzy
-msgid "Add printer"
-msgstr "äÁèÁÕà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "¤Ø³µéͧ¡Ò÷´Êͺ¡Òä͹¿Ô¡ËÃ×ÍäÁè"
-
-#: ../../printerdrake.pm_.c:2003
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "¡Òä͹¿Ô¡ Internet"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-#, fuzzy
-msgid "Printer connection type"
-msgstr "¡ÒÃàª×èÍÁµè͡Ѻ Internet Ẻ sharing"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "àÅ×Í¡¡ÒÃàª×èÍÁµè͡Ѻà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-#, fuzzy
-msgid "Print test pages"
-msgstr "¡ÓÅѧ¾ÔÁ¾ì¡ÃдÒÉ·´Êͺ"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-#, fuzzy
-msgid "Remove printer"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ·"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "ÍèÒ¹ CUPS drivers database..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2103
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "¤Ø³µéͧ¡ÒÃàÃÔèÁ·Ó§Ò¹ Network ãËÁèËÃ×ÍäÁè"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "ÍèÒ¹ CUPS drivers database..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "¡Òä͹¿Ô¡ Proxies"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Port"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "¤èҢͧ Proxy ¤ÇèÐà»ç¹ http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "Port number ¤ÇÃà»ç¹µÑÇàÅ¢"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "¤èҢͧ Proxy ¤ÇèÐà»ç¹ ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Autologin"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "ÃËÑʼèÒ¹"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "äÁèÁÕÃËÑʼèÒ¹"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "ÃËÑʼèÒ¹äÁèàËÁ×͹¡Ñ¹"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "äÁèÊÒÁÒöà¾ÔèÁ¾ÒÃìµÔªÑè¹à»ç¹ _formatted_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "äÁèÊÒÁÒöºÑ¹·Ö¡ä¿Åì %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid failed"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid failed (maybe raidtools are missing?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "äÁèÁÕ¾ÒÃìµÔªÑè¹¾ÍÊÓËÃѺ RAID ÃдѺ %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron ¤×Íâ»Ãá¡ÃÁÊÓËÃѺµÑé§àÇÅÒ·Ó§Ò¹"
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd ¤×Íâ»Ãá¡ÃÁ´ÙáÅʶҹТͧ battery \n"
-"ÁѹÊÒÁÒö¨Ð»Ô´à¤Ã×èͧàÁ×èÍàÇÅÒ battery ÁÕ俹éÍÂ"
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron ¤×Íâ»Ãá¡ÃÁÁҵðҹ¢Í§ Unix ·ÕèÊÑ觷ӧҹâ»Ãá¡ÃÁã¹àÇÅÒ·Õè¡Ó˹´\n"
-"vixie cron à¾ÔèÁ¤ÇÒÁÊÒÁÒöãËé¡Ñº UNIX cron «Öè§ÃÇÁ¶Ö§à¾ÔèÁ\n"
-"Ãкº¤ÇÒÁ»ÅÍ´ÀÑÂáÅÐ option ¡ÒûÃѺáµè§Í×è¹æ"
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ·ÓãËéÊÒÁÒöãªé mouse ¡Ñºâ»Ãá¡ÃÁ·ÕèÃѹ㹠text mode\n"
-"ÁѹÂѧªèÇ·ÓãËéÊÒÁÒöãªé cut-and-paste áÅÐ popup-menu \n"
-"´éÇÂ"
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr "Apache ¤×Í World Wide Web server"
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver daemon (inetd) ¨ÐÊÑ觷ӧҹâ»Ãá¡ÃÁËÅÒÂæÍÂèÒ§\n"
-"àÁ×èÍÁÕ¤ÇÒÁµéͧ¡ÒÃà¡Ô´¢Öé¹  µÑÇÍÂèÒ§â»Ãá¡ÃÁ·ÕèÁѹÃѺ¼Ô´ªÍº¤×Í telnet\n"
-"ftp rsh áÅÐ rlogin  ¡ÒáàÅÔ¡ inetd ¨Ð·ÓãËéâ»Ãá¡ÃÁ·Ñé§ËÁ´·ÕèÁѹÃѺ\n"
-"¼Ô´ªÍºÍÂÙèäÁè·Ó§Ò¹"
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"ᾡࡨ¹Õé¨ÐàÃÕ¡ãªé keyboard map µÒÁ·ÕèÃкØÍÂÙèã¹ \n"
-"/etc/sysconfig/keyboard  «Öè§ÊÒÁöàÅ×Í¡ä´éâ´Âãªé kbdconfig\n"
-"¤Ø³¤ÇûÅèÍÂãËéÁѹ·Ó§Ò¹ã¹à¤Ã×èͧ·ÑèÇä»"
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd ¤×Í print daemon ·Õè¨Óà»ç¹µéͧÁÕ¶éÒµéͧ¡ÒÃãËé lpr ·Ó§Ò¹¶Ù¡µéͧ\n"
-"·Õè¨ÃÔ§áÅéÇÁѹ¤×Í server ·Õè¨Ñ´¡ÒÃÊ觧ҹ¾ÔÁ¾ìä»à¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) ¤×Í Domain Name Server (DNS) ·Ó˹éÒ·Õèá»Å§ª×èÍ\n"
-"host names à»ç¹ IP addresses."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activates/Deactivates network interfaces ·Ñé§ËÁ´ ·Õè¶Ù¡µÑé§ãËé\n"
-"àÃÔèÁ·Ó§Ò¹µÍ¹ boot"
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ¤×Í protocol ·Õèãªé¡Ñ¹ÍÂèÒ§áËÃèËÅÒÂÊÓËÃѺ¡ÒÃáªÃìä¿Å캹TCP/IP networks.\n"
-"ÁѹãËé¡Ò÷ӧҹ¢Í§NFS server ·ÕèÃкØã¹ä¿Åì /etc/exports"
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ¤×Í protocol ·Õèãªé¡Ñ¹ÍÂèÒ§áËÃèËÅÒÂÊÓËÃѺ¡ÒÃáªÃìä¿Å캹TCP/IP networks.\n"
-"ÁѹãËé¡Ò÷ӧҹ¢Í§NFS server "
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA ʹѺʹع¡Ò÷ӧҹ¢Í§ÍØ»¡Ã³ìËÅÒÂæÍÂèÒ§àªè¹\n"
-"ethernet ËÃ×Í modem 㹤ÍÁ¾ÔÇàµÍÃìẺ¾¡¾Ò"
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper ºÃÔËÒáÒõԴµèͧ͢ RPC «Öè§ãªé¡Ñº\n"
-"protocols àªè¹ NFS áÅÐ NIS Portmap server µéͧ·Ó§Ò¹º¹à¤Ã×èͧ\n"
-"·Õè·Ó˹éÒ·Õèà»ç¹ server ¢Í§ protocal «Öè§àÃÕ¡ãªé¡Ò÷ӧҹẺ RPC"
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix à»ç¹â»Ãá¡ÃÁ·Ó˹éÒ·ÕèÊ觨´ËÁÒ¨ҡà¤Ã×èͧ˹Öè§\n"
-"ä»ÍÕ¡à¤Ã×èͧ˹Öè§"
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Ãѹ X-Window àÁ×èÍàÃÔèÁ·Ó§Ò¹"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:88
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "àÃÔèÁáÅÐËÂØ´ X Font Server µÍ¹ boot áÅÐ àÅÔ¡"
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "àÅ×Í¡¡ÒúÃÔ¡Ò÷Õèµéͧ¡ÒÃãËéàÃÔèÁµÑé§áµè¡ÒÃàÃÔèÁ·Ó§Ò¹¢Í§à¤Ã×èͧ"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "��ணயம�"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "System mode"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "ÍêÍ»ªÑ蹢ͧà¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ·"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "ª×èÍà«ÔÃì¿àÇÍÃì¢Í§¾ÃÔ¹àµÍÃì"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "ÍØ»¡Ã³ì"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "¡ÓÅѧ·Ó§Ò¹"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "ËÂØ´"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"äÁèÁÕ¢éÍÁÙÅà¾ÔèÁàµÔÁ\n"
-"ÊÓËÃѺ¡ÒúÃÔ¡ÒùÕé ¢Íâ·É¤ÃѺ"
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "¢³Ð boot"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "¡ÓÅѧµÔ´µÑé§á¾ç¤à¡ç¨ %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"â»Ãá¡ÃÁäÁèÊÒÁÒöÍèÒ¹µÒÃÒ§¾ÒÃìµÔªÑè¹ä´é ¢éÍÁÙÅã¹µÒÃÒ§äÁè¶Ù¡µéͧ :(\n"
-"â»Ãá¡ÃÁ¨Ð¾ÂÒÂÒÁà¤ÅÕÂÃì¾ÒÃìµÔªÑè¹·ÕèÁջѭËÒãËé"
-
-#: ../../standalone/drakautoinst_.c:44
-#, fuzzy
-msgid "Error!"
-msgstr "¼Ô´¾ÅÒ´"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:47
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "¡Òä͹¿Ô¡ËÅѧ¡ÒõԴµÑé§"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Boot Style Configuration"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "¢ÍáÊ´§¤ÇÒÁÂÔ¹´Õ"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "¡ÒÃàª×èÍÁµè͡Ѻ Internet Ẻ sharing"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "¡ÒÃàª×èÍÁµèÍ internet Ẻ share ä´é·Ó§Ò¹áÅéÇ"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "disable"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "àÅÔ¡"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "¤Í¹¿Ô¡ãËÁè"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "¡àÅÔ¡¡Ò÷ӧҹ¢Í§ server"
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "¡ÒÃàª×èÍÁµè͡Ѻ Internet Ẻ sharing ¶Ù¡Â¡àÅÔ¡áÅéÇ"
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "¡ÒõԴµèÍ internet Ẻ share ¶Ù¡Â¡àÅÔ¡áÅéÇ"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "enable"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "àÃÔèÁ·Ó§Ò¹ server"
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "¡ÒÃàª×èÍÁµè͡Ѻ Internet Ẻ sharing àÃÔèÁ·Ó§Ò¹áÅéÇ"
-
-#: ../../standalone/drakgw_.c:182
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"¢³Ð¹Õé¡ÒõèÍà¢éÒ internet ä´é·Ó¡ÒûÃѺáµè§àÃÕºÃéÍÂáÅéÇ\n"
-"¤Ø³ÊÒÁÒö·ÓãËé¼ÙéãªéÍ×è¹æäªé internet ÃèÇÁ¡Ñº¤Ø³ä´é\n"
-"(áµè¤Ø³¨Óà»ç¹µéͧÁÕ Network Adapter à¾×èÍ¡ÒõèÍÃкº LAN )\n"
-"\n"
-"¤Ø³µéͧ¡ÒÃãËé¼ÙéÍ×è¹ãªé internet ÃèÇÁ´éÇÂËÃ×ÍäÁè\n"
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (using module %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "äÁèÁÕÍØ»¡Ã³ì Network º¹à¤Ã×èͧ¤Ø³"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr "äÁèÊÒÁÒöµÃǨ¾º network adapter º¹à¤Ã×èͧ¹Õé ¡ÃسÒÃѹâ»Ãá¡ÃÁ»ÃѺáµè§ hardware"
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Network interface"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"ã¹à¤Ã×èͧ¢Í§¤Ø³ÁÕ network adapter Íѹà´ÕÂÇ·Õèä´éÃѺ¡ÒûÃѺáµè§áÅéÇ\n"
-"\n"
-"%s\n"
-"\n"
-"¼Á¡ÓÅѧ¨Ðãªé adapter ¹Õé¡ÑºÃкº LAN"
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "¡ÃسÒàÅ×Í¡ network adapter ·Õè¨Ðãªé¡ÑºÃкº LAN"
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr "ÃÐÇѧ network adapter ä´éà¤ÂÁÕ¡ÒûÃѺáµè§àÃÕºÃéÍÂáÅéÇ áµè¼Á¨Ð·Ó¡ÒûÃѺáµè§ãËÁè"
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "ÁÕ¤ÇÒÁ¢Ñ´áÂ駢ͧ LAN address «Öè§à¨Í㹤͹¿Ô¡»Ñ¨¨ØºÑ¹ã¹ %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "µÃǨ¾º¤Í¹¿Ô¡¢Í§ Firewall"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "¡ÓÅѧ·Ó¡Òä͹¿Ô¡"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "¡ÓÅѧ»ÃѺáµè§ scripts µÔ´µÑé§â»Ãá¡ÃÁ áÅÐàÃÔèÁ·Ó§Ò¹ servers..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "»Ñ­ËÒ¡ÒõԴµÑé§á¾ç¤à¡ç¨ %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"·Ø¡ÍÂèÒ§ä´é¶Ù¡·Ó¡ÒûÃѺáµè§àÃÕºÃéÍÂáÅéÇ\n"
-"¤Ø³ÊÒÁÒöãªéÍÔ¹àµÍÃì๵º¹¤ÍÁ¾ÔÇàµÍÃìÍ×è¹æã¹ LAN â´Âãªé (DHCP)"
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "¡ÒûÃѺáµè§àÃÕºÃéÍÂáÅéÇáÅе͹¹Õé¡çä´é·Ó§Ò¹áÅéÇ"
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "äÁèÁÕ¡ÒÃàª×èÍÁµè͡Ѻ Internet Ẻ sharing"
-
-#: ../../standalone/drakgw_.c:624
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "¡ÒÃàª×èÍÁµèÍ Internet áÅСÒûÃѺáµè§"
-
-#: ../../standalone/drakgw_.c:631
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"ÂÔ¹´Õµé͹ÃѺÊÙèà¤Ã×èͧÁ×Í㹡ÒõԴµèÍ internet Ẻ share\n"
-"\n"
-"%s\n"
-"\n"
-"¡´ ``Ok'' ¶éҤسµéͧ¡ÒÃàÃÔèÁ¡Ò÷ӧҹ¢Í§ setup wizard"
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "¡Òä͹¿Ô¡Ãкºà¹çµàÇÔÃì¡ (%d adapters)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profile: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "ź profile..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "profile ·Õèµéͧ¡ÒÃź:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "profile ãËÁè..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "ª×èÍâÎʵì:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "¡ÒõԴµèÍ internet"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "»ÃÐàÀ·: "
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "ࡵàÇÂì:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Interface:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "ʶҹÐ:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "àª×èÍÁµèÍÍÂÙè"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "äÁèàª×èÍÁµèÍ"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "µÔ´µèÍ"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "¡àÅÔ¡µÔ´µèÍ..."
-
-#: ../../standalone/draknet_.c:215
-#, fuzzy
-msgid "Starting your connection..."
-msgstr "·´Êͺ connection..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "¨º¡ÒõԴµèÍ..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "à¤Ã×èͧ¤Ø³ä´éàÅÔ¡¡ÒõԴµèÍáÅéÇ"
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "»ÃѺáµè§¡ÒõԴµèÍà¢éÒ internet"
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "¡ÒûÃѺáµè§ LAN"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protocol"
-
-#: ../../standalone/draknet_.c:255
-#, fuzzy
-msgid "State"
-msgstr "ʶҹÐ:"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "»ÃѺáµè§Ãкºà¹çµàÇÔÃì¡ÀÒÂã¹..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Áռŷѹ·Õ"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "¡ÃسÒÃÍÊÑ¡¤ÃÙè ..."
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "¡ÒûÃѺáµè§ LAN"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Boot Protocol"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "àÃÔèÁ·Ó§Ò¹µÍ¹ boot"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP client"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "activate now"
-msgstr "áÍ礷տ"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-#, fuzzy
-msgid "desactivate now"
-msgstr "áÍ礷տ"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "¡ÒûÃѺáµè§¡ÒõԴµèÍà¢éÒ internet"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "¡ÒûÃѺáµè§¡ÒõԴµèÍà¢éÒ internet"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "ª¹Ô´¡ÒÃàª×èÍÁµèÍ"
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parameters"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Ethernet Card"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP Client"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Welcome To Crackers"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "µèÓ¡ÇèÒÁҵðҹ"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoid"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "àÅ×Í¡ÃдѺÃкºÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑÂ"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "àÅ×Í¡ÍÍ»ªÑè¹à¾ÔèÁàµÔÁÊÓËÃѺà«ÔÃì¿àÇÍÃì"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "àÅ×Í¡ÃдѺÃкºÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑÂ"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Control Center"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "àÅ×Í¡à¤Ã×èͧÁ×Í·Õè¤Ø³µéͧ¡ÒÃãªé"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "ÇÔ¸Õ¡ÒÃãªé: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "à»ÅÕè¹ CD-ROM"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "äÁèÊÒÁÒöàÃÔèÁ live upgrade !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "äÁ辺 serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "µéͧ¡ÒèÓÅͧàÁéÒÊì»ØèÁ·ÕèÊÒÁ´éÇÂËÃ×ÍäÁè?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "¡ÒûÃѺáµè§ firewall"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "¡ÒûÃѺáµè§ firewall"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "àÅ×Í¡ÀÒÉÒ·Õè¤Ø³ãªé"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "àÅ×Í¡ªØ´¡ÒõԴµÑé§"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "¡ÒõÃǨËÒÎÒÃì´ä´ÃÇì"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "¤Í¹¿Ô¡àÁéÒÊì"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "àÅ×Í¡¤ÕÂìºÍÃì´"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Ãкº¤ÇÒÁ»éͧ¡Ñ¹"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "à«çµÍѾÃкºä¿Åì"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "¿ÍÃìáÁµ¾ÒÃìµÔªÑè¹"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "àÅ×Í¡á¾ç¤à¡ç¨"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "µÔ´µÑé§Ãкº"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "à¾ÔèÁ¼Ùéãªé"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "¤Í¹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "»ÃѺáµè§¡ÒúÃÔ¡ÒõèÒ§æ"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "ÊÃéÒ§á¼è¹ºÙµ"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "µÔ´µÑ駺ٵâËÅ´à´ÍÃì"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "¤Í¹¿Ô¡Ãкº X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "ÍÍ¡¨Ò¡¡ÒõԴµÑé§"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"¡ÒûÃѺáµè§àÃÕºÃéÍ ãËéºÑ¹·Ö¡¢éÍÁÙÅä´éãËÁ¤ÃѺ\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, fuzzy, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Adapter %s: %s"
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "à¡Ô´¢éͼԴ¾ÅҴ㹡ÒÃà»Ô´ %s ÊÓËÃѺ¡ÒÃà¢Õ¹: %s"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìã¹Ãкº Network (Socket)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office"
-msgstr "´Õ"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "Workstation ·Õè·Ó§Ò¹"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "à¤Ã×èͧÁ×ÍÊÓËÃѺ Palm Pilot ËÃ×Í Visor"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "Workstation ·Õè·Ó§Ò¹"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "KDE Workstation"
-msgstr "Workstation ·Õè·Ó§Ò¹"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Video"
-msgstr "Multimedia - à¢Õ¹ CD "
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "à¤Ã×ͧÁ×Í·ÕèªèÇÂ㹡ÒûÃѺáµè§à¤Ã×èͧªÍ§¤Ø³ãËé§èÒ¢Öé¹"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Sound"
-msgstr "Multimedia - à¢Õ¹ CD "
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Documentation"
-msgstr "µÓá˹è§"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "¡ÒÃàª×èÍÁµè͡Ѻ Internet Ẻ sharing"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Multimedia - à¢Õ¹ CD "
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "¡ÒûÃѺáµè§ LAN"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Graphical Desktops Í×è¹æ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "¡Ò÷ӧҹẺ¡ÃÒ¿¿Ô¡"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "¾Ñ²¹Ò«Í¿·ìáÇÃì (Development)"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "à¤Ã×èͧÁ×Í㹡ÒÃ·Ó CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Workstation ·Õè·Ó§Ò¹"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìã¹Ãкº Network (Socket)"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Workstation ·Õè·Ó§Ò¹"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - à¢Õ¹ CD "
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr "à¤Ã×èͧÁ×Í㹡ÒÃÍèÒ¹áÅÐÊè§ mail áÅÐ news (pine, mutt, tin..) áÅзèͧÍÔ¹àµÍÃìà¹çµ"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "¡ÒÃà§Ô¹ÊèǹµÑÇ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clients for different protocols including ssh"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "¡ÒõԴµèÍ internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Graphical Desktops Í×è¹æ"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "â»Ãá¡ÃÁ·ÕèªèǨѴ¡ÒÃàÃ×èͧ¡ÒÃà§Ô¹ àªè¹ gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - à¢Õ¹ CD "
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Workstation ·Ò§ÇÔ·ÂÒÈÒʵÃì"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "äÁèÊÒÁÒöà»Ô´ /etc/sysconfig/autologin ÁÒÍèÒ¹ä´é: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "¤Ø³µéͧ¡ÒÃàÃÔèÁ·Ó§Ò¹ Network ãËÁèËÃ×ÍäÁè"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "¤Ø³ÂÍÁÃѺËÃ×ÍäÁè"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "¼Á¡ÓÅѧ¨ÐàÅÔèÁ·Ó§Ò¹ Network Device ãËÁè:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "¼Á¡ÓÅѧ¨ÐàÃÔèÁ·Ó§Ò¹ Network Device %s ãËÁè µ¡Å§ãËÁ?"
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "µèÍ仹Õéà»ç¹¢éÍÁÙÅÃÍ¡ÒþÔÁ¾ì\n"
-#~ "¤Ø³ÊÒÁÒöà¾ÔèÁ¢éÍÁÙÅËÃ×Íá¡é䢢éÍÁÙÅ·ÕèÁÕä´é"
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "ª¹Ô´¡ÒÃàª×èÍÁµèÍ"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "àÅ×Í¡¼Ùéãªé default"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "¡Ãسҷ´ÊͺàÁéÒÊì"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "¡ÃسÒàÅ×Í¡ÀÒÉÒ·Õèµéͧ¡ÒÃ㹡ÒõԴµÑé§áÅÐãªé§Ò¹¢Í§Ãкº"
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "àÅ×Í¡ÃٻẺ¢Í§¤ÕÂìºÍÃì´µÒÁÃÒ¡ÒâéÒ§µé¹"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "àÅ×Í¡:\n"
-#~ "\n"
-#~ " - Ẻ»ÃѺá¡éä´é: ¢éÍàÅ×Í¡·Õèá¡éä¢ä´éX ¶éҤس¤Øé¹à¤Â¡ÑºÅչء«ì´ÕÍÂÙèáÅéÇ\n"
-#~ "   ¤Ø³ÍÒ¨µéͧ¡ÒÃàÅ×Í¡¡ÒõԴµÑé§ÃкºÃÐËÇèÒ§Ãкº·ÑèÇä», ÃкºÊÓËÃѺ¾Ñ²¹Ò«Í¿·ìáÇÃì\n"
-#~ "   ËÃ×ÍẺà«ÔÃì¿àÇÍÃì ãËéàÅ×Í¡ \"»¡µÔ\" ÊÓËÃѺµÔ´µÑ駵ÒÁ»¡µÔŧ㹤ÍÁ¾ÔÇàµÍÃì\n"
-#~ "   ¤Ø³ÍÒ¨àÅ×Í¡ \"¾Ñ²¹Ò«Í¿·ìáÇÃì\" ¶éҤسµéͧ¡ÒÃãËé¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ÊÓËÃѺ¡Ò÷ӧҹ\n"
-#~ "   Ẻ¡ÒþѲ¹Ò«Í¿·ìáÇÃì ËÃ×ÍàÅ×Í¡ \"à«ÔÿìàÇÍÃì\" ¶éҤسµéͧ¡ÒÃ\n"
-#~ "   µÔ´µÑ駫Ϳ·ìáÇÃìÊÓËÃѺà«ÔÃì¿àÇÍÃì·ÑèÇæä» (àªè¹àÁÅÅì ¡ÒþÔÁ¾ì...)\n"
-#~ "\n"
-#~ "\n"
-#~ " - Ẻ¼ÙéàªÕèÂǪÒ: (ÊÓËÃѺ¼ÙéªÓ¹Ò­áÅéÇ) ¶éҤسãªé§Ò¹ GNU/Linux ä´éÍÂèÒ§¤Åèͧá¤ÅèÇ\n"
-#~ "   áÅеéͧ¡ÒõԴµÑé§áººàÅ×Í¡´éǵ¹àͧ ¡ÒõԴµÑé§áºº¹Õé¨ÐàËÁÒÐÊÁ·ÕèÊØ´\n"
-#~ "   ¤Ø³ÂѧÊÒÁÒö¨ÐàÅ×Í¡ãªé§Ò¹Ãкº·Õè¤Ø³µÔ´µÑé§áºº \"Ẻ»ÃѺá¡éä´é\"ä´é´éÇÂ"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "¤Ø³µéͧàÅ×Í¡¡ÒÃãªé§Ò¹¢Í§à¤Ã×èͧ¤Ø³ ·Ò§àÅ×Í¡¤×Í:\n"
-#~ "\n"
-#~ "* Workstation\n"
-#~ "* Development\n"
-#~ "* Server"
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "µÍ¹¹Õé¤Ø³ÊÒÁÒö»é͹ÃËÑʼèÒ¹¢Í§ÃÙ· (¼Ùé´ÙáÅÃкº) «Ö觤س¨Ðµéͧ\n"
-#~ "»é͹ÃËÑʼèÒ¹Êͧ¤ÃÑé§à¾×èÍÂ×¹ÂѹÇèҤسä´é»é͹ÃËÑʼèÒ¹µÃ§¡Ñ¹\n"
-#~ "\n"
-#~ "\n"
-#~ "ÃÙ· à»ç¹¼Ùé´ÙáÅÃкº «Öè§à»ç¹¼Ùéãªé§Ò¹à¾Õ§¤¹à´ÕÂÇ·Õèä´éÃѺ͹حҵãËé\n"
-#~ "·Ó¡ÒáÒÃá¡é䢤͹¿Ô¡¢Í§Ãкºä´é ´Ñ§¹Ñ鹤س¨Óà»ç¹¨ÐµéͧàÅ×Í¡\n"
-#~ "ÃËÑʼèÒ¹ÍÂèÒ§ÃÐÁÑ´ÃÐÇѧ ¡ÒÃãªé§Ò¹ª×èͺѭªÕ¢Í§ÃÙ·â´ÂäÁèä´éÃѺ͹حҵ\n"
-#~ "ÍÒ¨¡èÍãËéà¡Ô´¤ÇÒÁàÊÕÂËÒÂÍÂèÒ§ÃéÒÂáç¡Ñº¤ÇÒÁ¶Ù¡µéͧ¢Í§¢éÍÁÙŢͧÃкº\n"
-#~ "ÃÇÁ·Ñé§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìÍ×è¹·ÕèµèÍÍÂÙè´éÇÂä´é ¡ÒáÓ˹´ÃËÑʼèÒ¹¨Ðµéͧ·Ó¡ÒÃ\n"
-#~ "¼ÊÁ¼ÊÒ¹¡Ñ¹ÃÐËÇèÒ§µÑÇÍÑ¡ÉÃáÅеÑÇàÅ¢ áÅÐãËéÁÕ¤ÇÒÁÂÒÇÍÂèÒ§¹éÍ 8 µÑÇÍÑ¡ÉÃ\n"
-#~ "¤Ø³ *äÁè¤ÇÃ* ¨´ÃËÑʼèÒ¹¢Í§¤Ø³äÇé ÍÂèÒ¡Ó˹´ãËéÃËÑʼèÒ¹ÂÒÇËÃ×ͫѺ«é͹à¡Ô¹ä»\n"
-#~ "áÅÐÍÂèÒ¡Ó˹´ãËéÃËÑʼèÒ¹ÂÒ¡áÅЫѺ«é͹à¡Ô¹¡ÇèҤس¨Ð¨Óä´é´éÇÂ"
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "µÍ¹¹Õé¤Ø³ÊÒÁÒöÊÃéÒ§ª×èͺѭªÕ¼ÙéãªéẺ \"regular\" (·ÑèÇä») ä´éáÅéÇ\n"
-#~ "«Ö觺ѭªÕẺ·ÑèÇ仹Õé¤Ø³ÊÒÁÒöÊÃéÒ§ä´éÁÒ¡¡ÇèÒ˹Ö觪×èÍ (ÃÙ·¨ÐÁÕä´éª×èÍà´ÕÂÇ)\n"
-#~ "áÅЪ×èͺѭªÕáµèÅЪ×èͨСÓ˹´äÇé੾ÒмÙéãªéáµèÅФ¹·Õèãªé§Ò¹¤ÍÁ¾ÔÇàµÍÃì «Öè§\n"
-#~ "áµèÅФ¹¡ç¨ÐÁÕ¢éÍ¡Ó˹´¢Í§µ¹àͧ (ÊÀÒ¾áÇ´ÅéÍÁẺ¡ÃÒ¿¿Ô¡, ¡ÒÃà«çµâ»Ãá¡ÃÁà»ç¹µé¹)\n"
-#~ "áÅÐÁÕ \"home directory\" (ä´àÃç¡·ÍÃÕºéÒ¹) à»ç¹¢Í§µ¹àͧ´éÇ«Öè§ä´àÃç¡·ÍÃÕºéÒ¹\n"
-#~ "¨Ðà»ç¹·Õèà¡çº¢éÍ¡Ó˹´àËÅèÒ¹Õé\n"
-#~ "\n"
-#~ "\n"
-#~ "¢éÍááÊØ´ ¤Ø³¨ÐµéͧÊÃéÒ§ª×èͺѭªÕÊÓËÃѺµ¹àͧ ¶Ö§áÁéÇèҤس¨Ðà»ç¹à¾Õ§¼Ùéãªé¤¹\n"
-#~ "à´ÕÂÇã¹Ãкº¡çµÒÁ à¹×èͧ¨Ò¡¤Ø³äÁèÊÒÁÒöà¢éÒµÔ´µèÍÃкº¨Ò¡à¤Ã×Í¢èÒ¼èÒ¹·Ò§\n"
-#~ "ª×èͼÙéãªé root ä´é (à¹×èͧ¨Ò¡ÃкºÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑÂ) «Öè§ËÒ¡äÁèÊÒÁÒöà¢éÒãªé\n"
-#~ "§Ò¹Ãкºä´é¡ç¨ÐäÁèÊÒÁÒöãªé§Ò¹ã´æä´é\n"
-#~ "\n"
-#~ "\n"
-#~ "´Ñ§¹Ñ鹤س¤ÇèеéͧµÔ´µèÍà¢éÒãªéÃкº¼èÒ¹·Ò§à¤Ã×Í¢èÒÂâ´Â·ÐàºÕ¹¢Í§¼Ùéãªé»¡µÔ\n"
-#~ "«Ö觤سä´éÊÃéÒ§äÇéã¹¢Ñ鹵͹¹Õé áÅÐà¢éÒÅçÍ¡ÍÔ¹ãªé§Ò¹ã¹°Ò¹ÐÃٷ੾ÒÐàÁ×èÍÁըش\n"
-#~ "»ÃÐʧ¤ì㹡ÒúÃÔËÒÃÃкº áÅзӡÒëèÍÁºÓÃاà·èÒ¹Ñé¹"
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "µÍ¹¹Õéä´éàÇÅÒ·Õè¨Ð¤Í¹¿Ô¡Ãкº X ÇÔ¹â´ÇÊìáÅéÇ «Öè§Ãкº X ¨Ðà»ç¹á¡¹¡ÅÒ§¢Í§\n"
-#~ "Ãкº GUI (Graphical User Interface) ¢Í§Åչء«ì 㹡Òä͹¿Ô¡¤Ø³¨Ðµéͧ\n"
-#~ "·Ó¡Òä͹¿Ô¡ÇÔ´ÕâÍ¡ÒÃì´áÅШÍÀÒ¾ «Ö觢Ñ鹵͹ÊèǹãË­è¨Ðà»ç¹áººÍѵâ¹ÁѵԷÑé§ËÁ´\n"
-#~ "´Ñ§¹Ñ鹤س¡çà¾Õ§á¤èµÃǨÊͺ¤ÇÒÁ¶Ù¡µéͧ áÅÐÃѺ·ÃÒº¡ÒÃà«çµÃкºà·èÒ¹Ñé¹àͧ :)\n"
-#~ "\n"
-#~ "\n"
-#~ "ËÅѧ¨Ò¡ÊÔé¹ÊØ´¡Òä͹¿Ô¡ X ¡ç¨ÐàÃÔèÁµé¹·Ó§Ò¹ (¡àÇ鹤سäÁèÊÑè§ãËé DrakX ·Ó)\n"
-#~ "à¾×èÍãËé¤Ø³ÊÒÁÒöµÃǨáÅзÃÒºä´éÇèÒ¡ÒÃà«çµ¹Ñé¹ÊÒÁÒöãªé§Ò¹ä´é ËÒ¡äÁèÊÒÁÒö\n"
-#~ "·Ó§Ò¹ä´é ¤Ø³ÊÒÁÒö¡ÅѺä»á¡é䢡ÒÃà«çµÍѾä´éµÅÍ´àÇÅÒ"
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Czech (Programmers)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovakian (Programmers)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "ª×èͧ͢ profile ·Õè¨ÐÊÃéÒ§:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "à¢Õ¹ŧ㹠/etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "àÃÕ¡¤×¹¨Ò¡ä¿Åì"
-
-#~ msgid "Save in file"
-#~ msgstr "ºÑ¹·Ö¡Å§ä¿Åì"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "àÃÕ¡¤×¹¨Ò¡á¼è¹¿ÅéÍ»»Õé"
-
-#~ msgid "Format all"
-#~ msgstr "¿ÍÃìáÁµ·Ñé§ËÁ´"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "ËÅѧ¨Ò¡¿ÍÃìáÁµ·Ø¡¾ÒÃìµÔªÑè¹"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "¢éÍÁÙÅ·Ñé§ËÁ´ã¹¾ÒÃìµÔªÑ蹨ж١ź·Ôé§"
-
-#~ msgid "Reload"
-#~ msgstr "àÃÕ¡¤×¹ÍÕ¡¤ÃÑé§"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "¤Ø³µéͧ¡ÒèзÓá¼è¹ floppy à¾×èÍ¡ÒõԴµÑé§áººÍÍâµéËÃ×ÍäÁè?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "¡Òä͹¿Ô¡ ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "àÇÅÒãªé CUPS SERVER ¤Ø³äÁè¨Óà»ç¹µéͧ»ÃѺáµè§à¤Ã×èͧ¾ÔÁ¾ì\n"
-#~ "㹵͹¹Õé  à¤Ã×èͧ¾ÔÁ¾ì¨Ð¶Ù¡¤é¹ËÒàͧ\n"
-#~ "¡àÇ鹤سÁÕ server º¹ network Í×è¹ ¡Ã³Õ¹Ñ鹤سµéͧ\n"
-#~ "ÃÐºØ IP ADDRESS áÅÐ port number ãËé¡Ñº CUPS server"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "ª×èͤÔÇÃÕâÁ·"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "ª×èÍâ´àÁ¹"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "äÁèÁÕà¤Ã×èͧ¾ÔÁ¾ì"
-
-#, fuzzy
-#~ msgid "start it"
-#~ msgstr "¨Óà¾ÒÐ"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "¡Òä͹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#, fuzzy
-#~ msgid "Profile "
-#~ msgstr "Profile: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "ª¹Ô´¡ÒÃàª×èÍÁµèÍ"
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "àª×èÍÁµèÍ Internet"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "¨º¡ÒÃàª×èÍÁµèÍ Internet "
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "¨º¡ÒÃàª×èÍÁµèÍ Internet "
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "¨º¡ÒÃàª×èÍÁµèÍ Internet "
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "ª×èÍ¡ÒÃàª×èÍÁµèÍ"
-
-#, fuzzy
-#~ msgid "Color configuration"
-#~ msgstr "¡Òä͹¿Ô¡"
-
-#, fuzzy
-#~ msgid "Connect"
-#~ msgstr "àª×èÍÁµèÍÍÂÙè"
-
-#, fuzzy
-#~ msgid "Disconnect"
-#~ msgstr "¡àÅÔ¡µÔ´µèÍ..."
-
-#~ msgid "/File/_New"
-#~ msgstr "/ä¿Åì/_ãËÁè"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>N"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/ä¿Åì/_à»Ô´"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>O"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/ä¿Åì/_ºÑ¹·Ö¡"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/ä¿Åì/_ºÑ¹·Ö¡à»ç¹"
-
-#~ msgid "/File/-"
-#~ msgstr "/ä¿Åì/-"
-
-#~ msgid "/_Help"
-#~ msgstr "/_ªèÇÂàËÅ×Í"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/ªèÇÂàËÅ×Í/_About..."
-
-#~ msgid "Europe"
-#~ msgstr "ÂØâû"
-
-#~ msgid "NetWare"
-#~ msgstr "à¹çµáÇÃì"
-
-#~ msgid "Remove queue"
-#~ msgstr "ź¤ÔÇ"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Unrecognized config file"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "¡àÅÔ¡·Ó§Ò¹"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "àÃÔèÁ·Ó§Ò¹"
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "¡ÒõԴµèÍẺ DSL ËÃ×Í ADSL"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "You can specify directly the URI to access the printer with CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "ãªè ãËé¾ÔÁ¾ì¡ÃдÒÉ·´ÊͺẺ ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "ãªè ãËé¾ÔÁ¾ì¡ÃдÒÉ·´ÊͺẺâ¾ÊµìʤÃÔ»µì"
-
-#~ msgid "Paper Size"
-#~ msgstr "¢¹Ò´¡ÃдÒÉ"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "ãËé¤×¹¡ÃдÒÉÍÍ¡ÁÒËÅѧ¨Ò¡àÊÃ稧ҹ´éÇÂËÃ×ÍäÁè?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "ÍêÍ»ªÑ蹢ͧä´ÃàÇÍÃìẺ Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "ÍêÍ»ªÑ蹢ͧ¤ÇÒÁÅÐàÍÕ´ÊÕ"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Print text as PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "ãËé·Ó¢éͤÇÒÁ stair-stepping Ẻ¤§·ÕèËÃ×ÍäÁè"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "¨Ó¹Ç¹Ë¹éÒµèͤÃÑé§"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "¢ÇÒ/«éÒ margins ˹èÇ points (1/72 of inch)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "º¹/ÅèÒ§ margins ˹èÇ points (1/72 of inch)"
-
-#~ msgid "Extra Text options"
-#~ msgstr "ÍêÍ»ªÑè¹µÑÇ˹ѧÊ×Í"
-
-#~ msgid "Reverse page order"
-#~ msgstr "ÊÅѺÅӴѺ˹éÒ"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "àÅ×Í¡¡ÒÃàª×èÍÁµè͡Ѻà¤Ã×èͧ¾ÔÁ¾ì"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "à¤Ã×èͧ¾ÔÁ¾ì·Ø¡à¤Ã×èͧµéͧ¡Òê×èÍ\n"
-#~ "à¤Ã×èͧ¾ÔÁ¾ì¹Õéãªéª×èÍÍÐäÃáÅÐ\n"
-#~ "à¤Ã×èͧ¾ÔÁ¾ì¹ÕéµÔ´µèÍâ´ÂÇÔ¸Õã´"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "¾ÃÔ¹µì¤ÔÇ (¾ÃÔ¹µì¤ÔÇà»ç¹·Õèæ§Ò¹¾ÔÁ¾ì¨Ðä»à¡çºäÇé·Õè¹Õè¡è͹Êè§à¤Ã×èͧ¾ÔÁ¾ì)\n"
-#~ "µéͧ¡ÒÃãËéÁÕ¡ÒõÑ駪×èÍ (»¡µÔ¨Ðà»ç¹ lp) áÅÐä´àÃç¡·ÍÃÕ·Õèà¡çº¢éÍÁÙÅ\n"
-#~ "¤Ø³µéͧ¡ÒõÑ駪×èÍ áÅСÓ˹´ä´àÃç¡·ÍÃÕãËéà»ç¹¤èÒã´ºéÒ§?"
-
-#~ msgid "Name of queue"
-#~ msgstr "ª×èͧ͢¤ÔÇ"
-
-#~ msgid "Spool directory"
-#~ msgstr "Ê»ÙÅä´àÃç¡·ÍÃÕ"
-
-#, fuzzy
-#~ msgid "fsck failed: "
-#~ msgstr "¡ÒÃàÁéÒ·ìÅéÁàËÅÇ: "
-
-#~ msgid "yellow pages"
-#~ msgstr "ãªéÃкºÊÁش˹éÒàËÅ×ͧ (yellow pages)"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "¡ÒûÃѺáµè§ LAN"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "¤Ø³µéͧ¡ÒèеèÍà¢éÒ Internet â´ÂÇÔ¸Õã´"
-
-#, fuzzy
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "¡ÒûÃѺáµè§ LAN"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "àÅ×Í¡ä¿Åì %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "àÃÔèÁ¡ÒõԴµèÍ.."
-
-#~ msgid "Configure..."
-#~ msgstr "¡ÓÅѧ·Ó¡ÒûÃѺáµè§.."
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "script àÃÔèÁµé¹¹Õé¾ÂÒÂÒÁ·Õè¨ÐàÃÕ¡ãªé modules ÊÓËÃѺ usb mouse"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "¡Òä͹¿Ô¡ËÅѧÅѡɳСÒà boot"
-
-#~ msgid "Configuration complete.  May we write these changes to disk?"
-#~ msgstr "¡ÒûÃѺáµè§àÃÕºÃéÍ ãËéºÑ¹·Ö¡¢éÍÁÙÅä´éãËÁ¤ÃѺ"
-
-#, fuzzy
-#~ msgid "Welcome to the Internet Connection Sharing utility!"
-#~ msgstr "¡ÒÃàª×èÍÁµè͡Ѻ Internet Ẻ sharing"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "¤Í¹¿Ô¡ LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "ÊÃéÒ§á¼è¹ºÙµ"
-
-#~ msgid "Format floppy"
-#~ msgstr "¿ÍÃìáÁµ Floppy"
-
-#~ msgid "Choice"
-#~ msgstr "·Ò§àÅ×Í¡"
diff --git a/perl-install/share/po/tr.po b/perl-install/share/po/tr.po
deleted file mode 100644
index 6c66470ec..000000000
--- a/perl-install/share/po/tr.po
+++ /dev/null
@@ -1,9291 +0,0 @@
-# Turkish translation of DrakX
-# Copyright (C) 1999-2001 MandrakeSof
-# Nilgün Belma Bugüner <nilgun@fide.org>, 2001
-# Hakan Terzioglu <hakan@gelecek.com.tr>, 1999
-# AHMET SEZEN <ahmet@gelecek.com.tr>, 1999
-# Görkem Çetin <gorkem@gelecek.com.tr>, 2000
-# Nazmi Savga <savga@catlover.com>, 2000
-# Ömer Fadýl USTA <omer_fad@hotmail.com>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX 1.0\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-09-23 19:27+300\n"
-"Last-Translator: Nilgün Belma Bugüner <nilgun@fide.org>\n"
-"Language-Team: Turkish <gnu-tr-u12a@lists.sourceforge.net>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-9\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Tüm kafalar tek tek yapýlandýrýlýyor"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Xinerama geniþletmesini kullan"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Sadece \"%s\" (%s) kartý yapýlandýrýlsýn"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Çoklu-Kafa yapýlandýrmasý"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Sisteminiz Çoklu-Kafa yapýlandýrmasýný destekliyor.\n"
-"Yapýlmasýný ister misiniz?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Ekran kartý"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Bir ekran kartý seçiniz"
-
-#
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Bir X sunucusu seçiniz"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X sunucusu"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Hangi XFree86 yapýlandýrmasýný kullanmak istiyorsunuz?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ekran kartýnýz 3D donaným hýzlandýrmasý desteðine sadece XFree %s\n"
-"ile sahip olabilir. Kartýnýz 2 boyutta daha iyi destek verebilen XFree %s\n"
-"tarafýndan da desteklenmektedir."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Ekran kartýnýz XFree %s ile çalýþtýrýldýðýnda 3D donaným hýzlandýrmasý\n"
-"desteðine sahip olabilir."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ile 3D donaným hýzlandýrmasý"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Ekran kartýnýz XFree %s ile 3D donaným hýzlandýrmasý desteðine sahip\n"
-"olabilir, ANCAK BU DENEYSEL BÝR DESTEKTÝR VE MAKÝNANIZI KÝLÝTLEYEBÝLÝR."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ile deneysel 3D donaným hýzlandýrmasý"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ekran kartýnýz sadece XFree %s ile 3D donaným hýzlandýrmasý desteðine\n"
-"sahip olabilir, ANCAK BU DENEYSEL BÝR DESTEKTÝR VE MAKÝNANIZI "
-"KÝLÝTLEYEBÝLÝR.\n"
-"Kartýnýza XFree %s tarafýndan verilen 2D desteði daha iyi durumdadýr."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (kurulum ekran sürücüsü)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree yapýlandýrmasý"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Ekran kartýnýzýn bellek miktarýný seçin"
-
-#
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "X sunucusu için seçenekleri belirtin"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Monitörünüzü seçin"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Monitör"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Burada ki iki önemli parametre dikey ve yatay tazeleme hýzlarýdýr.\n"
-"Seçiminizi yaparken monitörünüzün kapasitesinin üstünde bir seçim\n"
-"yapmamanýz oldukça önemlidir, aksi takdirde monitör zarar görebilir.\n"
-"Seçerken bir ikileme düþerseniz, düþük çözünürlükte bir ayar seçin."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Yatay tazeleme hýzý"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Dikey tazeleme hýzý"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Monitör yapýlandýrýlmamýþ"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Ekran kartý henüz yapýlandýrýlmadý"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Çözünürlük henüz seçilmedi"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Yapýlandýrmanýzý denemek ister misiniz?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Uyarý: Bu grafik kartý denenirken makinanýz kilitlenebilir"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Yapýlandýrmanýn denenmesi"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"bazý parametreleri deðiþtirmeyi deneyin"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "Bir hata oluþtu:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d saniye sonra çýkýlýyor"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "Bu ayarlar doðru mu?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "Bir hata oluþtu, bazý parametreleri deðiþtirmeyi deneyin"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Çözünürlük"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Çözünürlüðü ve renk derinliðini belirtin"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Ekran kartý: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 sunucusu: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Uzman kipi"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Hepsini Göster"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Çözünürlükler"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klavye yerleþimi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Fare türü: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Fare aygýtý: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitör: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitörün Yatay Tazelemesi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitörün Dikey Tazelemesi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Ekran kartý: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Ekran kartý kimliði: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Ekran kartý belleði: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Renk derinliði: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Çözünürlük: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 sunucusu: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 sürücüsü: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "X-Window yapýlandýrmasý hazýrlanýyor"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Ne yapmak istiyorsunuz?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Monitörü Deðiþtir"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Ekran kartýný deðiþtir"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Sunucu seçeneklerini deðiþtir"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Çözünürlüðü deðiþtir"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Bilgileri göster"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Tekrar dene"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Çýkýþ"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Deðiþiklikler kaydedilsin mi?\n"
-"Þu an ki yapýlandýrma:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Lütfen deðiþiklikleri etkinleþtirmek için tekrar %s'e giriþ yapýn"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Lütfen çýkýn ve Ctrl-Alt-BackSpace tuþlarýna basýn"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "Açýlýþta X"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Bilgisayarýnýz otomatik olarak X'le açýlmasý için ayarlanabilir.\n"
-"Açýlýþta X Window ile baþlamak ister misiniz?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 renk (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 bin renk (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 bin renk (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milyon renk (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milyar renk (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB veya daha fazla"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standart VGA, 60 Hz'de 640x480 "
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Süper VGA, 56 Hz'de 800x600"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Uyumlu, 87 Hz'de titreþimli 1024x768 (800x600 yok)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Süper VGA, 87 Hz'de titreþimli 1024x768, 56 Hz'de 800x600"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Geliþtirilmiþ Süper VGA, 60 Hz'de 800x600, 72 Hz'de 640x480"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Titreþimsiz SVGA, 60 Hz'de 1024x768, 72 Hz'de 800x600"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Yüksek Frekanslý SVGA, 70 Hz'de 1024x768"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "60 Hz'de 1280x1024 yapabilen çoklu frekans"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "74 Hz'de 1280x1024 yapabilen çoklu frekans"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "76 Hz'de 1280x1024 yapabilen çoklu frekans"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "70 Hz de 1600x1200 yapabilen Monitör"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "76 Hz de 1600x1200 yapabilen Monitör"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Önyükleme bölümünün ilk sektörü"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Diskin ilk sektörü (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILO Kurulumu"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Önyükleyiciyi nereye kurmak istiyorsunuz?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "LILO/grub Kurulumu"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "Metin tabanlý LILO"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "Grafik tabanlý LILO"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "DOS/Windows' dan açýlýþ (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Önyükleyici ana seçenekleri"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Kullanýlacak önyükleyici"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Önyükleyici kurulumu"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Önyükleme Aygýtý"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (eski BIOS'larda çalýþmaz)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Sýkýþýk"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "sýkýþýk"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Ekran kipi"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Öntanýmlý görüntünün yüklenmesinden önceki gecikme"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Parola"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Parola (tekrar)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Komut satýrý seçeneklerini kýsýtla"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "kýsýtla"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "/tmp dizinin her açýlýþta temizle"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Gereken bellek (%d MB bulundu)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Birden çok profil'e izin ver"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Bellek boyutunu Mb cinsinden veriniz"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"\"Komut satýrý seçeneklerini kýsýtla\" seçeneði parolasýz bir iþe yaramaz"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Lütfen tekrar deneyin"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Parolalar uyuþmuyor"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Init Ýletileri"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Gömülü Sistem Gecikmesini Aç"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Çekirdek Önyükleme Zaman Aþýmý"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "CD den açýlýþ etkinleþtirilsin mi?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "OF açýlýþý etkinleþtirilsin mi?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Öntanýmlý Ýþletim Sistemi?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Burada ki seçeneklere yenilerini ekleyebilir\n"
-"ya da mevcut olanlarý deðiþtirebilirsiniz."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Ekle"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Bitti"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Deðiþtir"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Ne tür bir giriþ yapmak istiyorsunuz?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Diðer iþletim sistemleri (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Diðer iþletim sistemleri (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Diðer iþletim sistemleri (Windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Görüntü"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Kök"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Sonuna ekle"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Oku-yaz"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tablo"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Güvensiz"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Etiket"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Öntanýmlý"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-boyutu"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "Görüntüsüz"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Girdiyi sil"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Boþ etiket kabul edilemez"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Bu etiket kullanýmda"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s arayüzü bulundu"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Baþka var mý?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Hiç %s arayüzü var mý?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Hayýr"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Evet"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Donaným bilgilerine bak"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%s %s kartý için sürücü yüklenmesi"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(modül %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hangi %s sürücüsü denensin?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Bazý durumlarda, %s sürücü düzgün çalýþmak için fazladan bilgi isteyebilir.\n"
-"Sürücüler için fazladan bir özellik belirtmek mi istersiniz, yoksa\n"
-"sürücülerin gerekli bilgiler için donanýmýnýzý tanýmasýný mý istersiniz?\n"
-"Bazen tanýmlama makinanýzý kilitleyebilir ama kilitlenmeden dolayý\n"
-"makinanýza herhangi bir zarar gelmez."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Otomatik Algýla"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Seçenekleri belirtin"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Þimdi %s modülüne parametreleri girebilirsiniz."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Ýsterseniz þimdi %s modülünün parametrelerini belirtebilirsiniz.\n"
-"Parametreler``isim=deðer isim2=deðer2...'' þeklinde olmalýdýr.\n"
-"Örneðin ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Modül seçenekleri:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"%s modülü yüklenemedi.\n"
-"Tekrar baþka parametrelerle ile denemek ister misiniz?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s zaten ekli)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Zayýf bir parola seçtiniz!"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Lütfen bir kullanýcý adý verin"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Kullanýcý adýnda sadece küçük harfler, sayýlar, `-' ve `_' karakterleri "
-"bulunabilir"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Bu kullanýcý adý daha önce eklenmiþ"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Kullanýcý ekle"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Bir kullanýcý girin\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Kullanýcýyý etkinleþtir"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Gerçek adý"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Kullanýcý adý"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Kabuk"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Simge"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Otomatik giriþ"
-
-#: ../../any.pm_.c:757
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Bilgisayarýnýz açýldýðýnda otomatik olarak bir kullanýcý giriþi\n"
-"olmasý saðlanabilir. Bu özelliði ilerde de kullanmak ister misiniz?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Öntanýmlý kullanýcýyý belirtin:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Çalýþtýrmak istediðiniz pencere yöneticisini seçin:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Lütfen kullanacaðýnýz dili seçin."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "Kurulumdan sonra kullanabileceðiniz baþka diller de seçebilirsiniz"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Tümü"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"%s isletim sistemi secim programina hos geldiniz!\n"
-"\n"
-"Yukarida ki listeden bir isletim sistemi seciniz\n"
-"ya da ontanimli olanin acilmasi icin %d saniye bekleyiniz.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Ýsletim sistemi secici GRUB'a hos geldiniz!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Bir secenegi isaretli duruma getirmek icin %c ve %c tuslarini kullaniniz."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Sistemi secili isletim sistemiyle acmak icin enter,\n"
-"acilistan "
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-"once komutlari duzenlemek icin 'e',\n"
-"komut satiri icin ise 'c' basin"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Isaretli secenek ile %d saniye icinde sistem acilacak."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "/boot içinde yeterli yer yok"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Masaüstü"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Baþlat Menüsü"
-
-#: ../../bootloader.pm_.c:972
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Açýlýþ yükleyicisini %s bölümüne yükleyemezsiniz\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "bu konuda yardým bulunmamaktadýr.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Önyükleme Yapýlandýrmasý"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Dosya"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Dosya/Çý_kýþ"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>K"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Yeni Tarz Ekran Sýnýflamasý"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Yeni Tarz Ekran"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Geleneksel Ekran"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Geleneksel Gtk+ Ekran"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Aurora her açýlýþta çalýþtýrýlsýn"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Lilo/Grup kipi"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"%s Önyükleme Yöneticisi kullanýyorsunuz.\n"
-"Ayar sihirbazýný çalýþtýrmak için 'Yapýlandýr'a týklayýn."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Yapýlandýr"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Önyükleme kipi"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Sistem Kipi"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "X-Pencere sistemi açýlýþta çalýþtýrýlsýn"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Hayýr, Otomatik giriþ istemiyorum"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Evet, otomatik giriþi bu özelliklerle istiyorum (kullanýcý,masaüstü)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "TAMAM"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Ýptal"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "\"/etc/inittab\" dosyasý okumak için açýlamýyor: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "LILO kurulumu baþarýsýz oldu. Oluþan hata:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "kB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d dakika"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 dakika"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d saniye"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Önce verinizin yedeðini alýnýz"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Dikkatli Okuyun!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Aboot'u kullanmayý planlýyorsanýz, diskin baþlangýcýnda\n"
-"boþ disk alaný (2048 sektör yeterli) býrakmayý ihmal etmeyin."
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Hata"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Sihirbaz"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Yeni"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "Karþý"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Baðlama noktasý"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Seçenekler"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Türü"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Ayýr"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Baðla"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Birini seçin"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tek bir büyük FAT disk bölümünüz var\n"
-"(genellikle MS DOS/Windows tarafýndan kullanýlýr).\n"
-"Öncelikle bu disk bölümünün boyutunu deðiþtirmenizi\n"
-"öneriyoruz. Önce bölümün üzerine, sonra \"Yeniden\n"
-"Boyutlandýr\" düðmesine týklayýnýz"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Lütfen bir bölüm üzerine týklayýn"
-
-#: ../../diskdrake.pm_.c:240
-msgid "Please click on a media"
-msgstr "Lütfen bir ortam seçin"
-
-#: ../../diskdrake.pm_.c:243
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr ""
-"Lütfen yukarýdaki düðmelerden birine\n"
-"\n"
-"Ya da \"Yeni\" düðmesine týklayýn."
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr " \"Yeni\" düðmesine týklayýn"
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Ayrýntýlar"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Journalised FS"
-msgstr "Günlük FS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Takas"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Boþ"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Diðer"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Dosya sistemi türü:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Oluþtur"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Yerine ``%s'' kullanýn"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Sil"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Önce ``Ayýr''ý kullanýn"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölümünün türü deðiþtirildikten sonra, üzerindeki tüm bilgiler "
-"silinecektir"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "%s aygýtýný nereye baðlamak istiyorsunuz?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "Baðlama seçenekleri"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "Çeþitli"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "Kaldýrýlabilir ortam"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "Türünü Deðiþtir"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Hangi dosya sistemini istiyorsunuz?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "Paylaþýmlý að dosya sistemleri taranýyor"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "%s sunucusunun paylaþýmlý að dosya sistemleri taranýyor"
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-"Yukarýdaki liste gerekli girdiyi içermiyorsa onu burada verebilirsiniz:"
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Sunucu"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "Paylaþýmlý özkaynaklar"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "Paylaþýmlý samba özkaynaklarý taranýyor"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "%s sunucusunun paylaþýmlý samba özkaynaklarý taranýyor"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "Bir disk bölümü seçiniz"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Bir baþka disk bölümü seçiniz"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Çýkýþ"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Uzman kipine geç"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Normal kipe geç"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Geri al"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Yine de devam edilsin mi?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Kaydetmeden Çýk"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Bölümlendirme tablosunu kaydetmeden mi çýkýyorsunuz?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "/etc/fstab deðiþikliklerini kaydetmek istiyor musunuz ?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Otomatik bölümle"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Tümünü Temizle"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Daha"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "Sabit Disk bilgisi"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Otomatik bölümleme için yeterli boþ alan yok"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Tüm birincil disk bölümleri kullanýldý"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Baþka disk bölümü eklenemez"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Daha fazla bölüm oluþturmak için, bir bölümü silip mantýksal bölüm oluþturun"
-
-#: ../../diskdrake_interactive.pm_.c:285
-msgid "Save partition table"
-msgstr "Bölümlendirme tablosunu kaydet"
-
-#: ../../diskdrake_interactive.pm_.c:286
-msgid "Restore partition table"
-msgstr "Bölümlendirme tablosunu eski durumuna getir"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Bölümlendirme tablosunu kurtar"
-
-#: ../../diskdrake_interactive.pm_.c:289
-msgid "Reload partition table"
-msgstr "Bölümlendirme tablosunu yeniden yükle"
-
-#: ../../diskdrake_interactive.pm_.c:293
-msgid "Removable media automounting"
-msgstr "Kaldýrýlabilir ortam otomatik baðlanýyor"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Dosya seç"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Yedek bölümlendirme tablosu ayný deðil\n"
-"Yine de devam etmek istiyor musunuz?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Uyarý"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"DÝsket sürücüye bir disket yerleþtirin\n"
-"Bu disketteki tüm bilgileriniz silinecektir"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Bölümlendirme tablosu kurtarýlmaya çalýþýlýyor"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "Ayrýntýlý bilgi"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Yeniden Boyutlandýr"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Taþý"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Biçemle"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Etkin"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "RAID'e ekle"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "LVM'e ekle"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "RAID'den kaldýr"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "LVM'den kaldýr"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "RAID'i deðiþtir"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Loopback için kullan"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Yeni bölüm oluþtur"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Baþlangýç sektörü: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "MB cinsinden boyut: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Dosya sistemi türü: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Baðlama noktasý: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Tercih: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-msgid "Remove the loopback file?"
-msgstr "Loopback dosyasý kaldýrýlsýn mý ?"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Bölüm türünü deðiþtir"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "ext2 yi ext3 e çevir"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "%s loopback dosyasýný nereye baðlamak istiyorsunuz?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Bu baðlama noktasý loopback için kullanýldýðýndan kaldýrýlamaz.\n"
-"Önce loopback kaldýrýlmalýdýr."
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "FAT dosya sistemi sýnýrlarý hesaplanýyor"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Yeniden boyutlandýrýlma"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Bu bölüm tekrar boyutlandýrýlabilir deðil"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Bu bölümdeki tüm bilgiler yedeklenmelidir"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"%s yeniden boyutlandýrýldýktan sonra üzerindeki tüm bilgiler silinecektir"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Yeni boyutu belirtin"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "MB olarak yeni boyut: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Hangi diske taþýmak istiyorsunuz?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sektör"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Hangi sektöre taþýmak istiyorsunuz?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Taþýnýyor"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Bölüm taþýnýyor..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Eklemek için mevcut bir RAID seçin"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "yeni"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Eklemek için mevcut bir LVM seçin"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "LVM ismi?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Bu disk bölümü loopback için kullanýlamaz"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Loopback dosya ismi: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-msgid "Give a file name"
-msgstr "Bir dosya ismi verin"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Dosya baþka bir loopback tarafýndan kullanýlýyor,\n"
-"baþka bir tane seçin"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Dosya zaten var. Kullanýlsýn mý?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "aygýt"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "seviye"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "parça boyutu"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Dikkatli olun: bu iþlem tehlikelidir."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Ne tür bir bölümleme istiyorsunuz?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Önyükleme bölümü bu sürücünün üstünde oluþturulamaz (1024. silindirden "
-"sonra).\n"
-"Bu durumda ya LILO ve bir önyükleme bölümü kullanmayabilirsiniz ya da\n"
-"çalýþmayabileceðini gözönüne alarak LILO kullanmayý deneyebilirsiniz."
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Kök (/) olarak seçtiðiniz bölüm 1024. silindirden sonra ve bir önyükleme\n"
-"bölümünüz yok. LILO önyükleme yöneticisini kullanmak istiyorsanýz,\n"
-"önyükleme bölümünü eklemeyi ihmal etmeyin."
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Bir yazýlým RAID bölümünü kök dizini (/) olarak atadýnýz.\n"
-"Hiçbir önyükleyici önyükleme bölümü olmadan bunu çalýþtýramaz.\n"
-"Bu nedenle bir önyükleme bölümü eklemeyi ihmal etmeyin."
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "%s sürücüsünün bölümlendirme tablosu diske yazýlacak!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Yeni ayarlarýn etkinleþmesi için sistemi yeniden baþlatmalýsýnýz"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "%s bölümü biçemlendirilirken üzerinde ki tüm bilgiler silinecektir"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Biçemlendiriliyor"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Loopback dosyasý biçimlendiriliyor: %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Biçemlendirilen bölüm: %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Hide files"
-msgstr "Dosyalarý gizle"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Move files to the new partition"
-msgstr "Dosyalar yeni bölüme taþýnsýn"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"%s dizini zaten biraz veri içeriyor\n"
-"(%s)"
-
-#: ../../diskdrake_interactive.pm_.c:906
-msgid "Moving files to the new partition"
-msgstr "Dosyalar yeni bölüme taþýnsýn"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr "%s kopyalanýyor"
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, c-format
-msgid "Removing %s"
-msgstr "%s siliniyor"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Aygýt: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS sürücü harfi: %s (sadece tahmin)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Türü: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Ýsim: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Baþlangýç: sektör %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Boyut: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektör"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "%d. silindirden %d. silindire kadar\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Biçemlendirilmiþ\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Biçemlendirilmemiþ\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Baðlandý\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback dosyasý:\n"
-"   %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Öntanýmlý olarak yüklenecek bölüm\n"
-"    (MS-DOS açýlýþý için, lilo için deðil)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Seviye %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Parça boyutu %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskleri %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback dosyasý ismi: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Þans iþte!, bu disk bölümü\n"
-"bir Aygýt bölümüdür ve büyük\n"
-"ihtimalle onu tek baþýna\n"
-"býrakacaksýnýz.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Bu, çok önyüklemeli sistemler\n"
-"için özel bir önyükleme bölümüdür.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Boyut: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometri: %s silindir, %s kafa, %s sektör\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Bilgi: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskleri %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Bölümlendirme tablosu türü: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "%d veriyolunda, %d kimlikli\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Seçenekler: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s biçimlemesinde %s bölüm hatasý"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "%s bölümünün %s türünde nasýl biçemlendirileceði bilinmiyor"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "baðlama baþarýsýz"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck %d çýkýþ kodu veya %d sinyali ile baþarýsýz oldu"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "baðlama baþarýsýz: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "%s ayrýlýrken hata: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "basit"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "sunucu"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "16MB dan küçük disk bölümlerinde JFS kullanamazsýnýz"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "32MB dan küçük disk bölümlerinde ReiserFS kullanamazsýnýz"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Baðlama noktalarý / ile baþlamalýdýr"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Baðlama noktasý %s olan bir bölüm zaten var\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Bir LVM Havuzunu %s baðlantý noktasý olarak kullanmazsýnýz."
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Bu dizin kök dosya sistemi içinde kalmalý"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Bu baðlama noktasý için gerçek bir dosya sistemi (ext2, reisrfs) gerekiyor.\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Yazmak için %s açýlýrken hata: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Bir hata oluþtu. Yeni dosya sisteminin oluþturulacaðý geçerli bir sürücü "
-"bulunamadý. Bu sorunu çözmek için donanýmýnýzý kontrol edin"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Hiç disk bölümünüz yok!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux çok kullanýcýlý bir sistemdir, yani her kullanýcýnýn kendi\n"
-"tercihleri, kendi dosyalarý, v.s. olabilir. Daha fazla bilgi edinmek için\n"
-"\"Kullanýcý Kýlavuzu\"nu okuyunuz. Sistem Yöneticisi olan \"root\" "
-"dýþýndaki\n"
-"kullanýcýlar kendi dosyalarý ve yapýlandýrmalarý dýþýnda hiçbir þeyi\n"
-"deðiþtiremezler. Kendiniz için en az bir normal kullanýcý oluþturmalýsýnýz.\n"
-"Bu hesabý sýradan iþler için kullanacaksýnýz. Sisteminizi \"root\" olarak\n"
-"kullanmak çok pratik gibi görünse de aslýnda çok tehlikelidir. En küçük bir\n"
-"yanlýþlýk sisteminizin çalýþmamasýyla sonuçlanabilir. Ama normal kullanýcý\n"
-"olarak bir sürü yanlýþ da yapsanýz sadece kendi bilgilerinize zarar vermiþ\n"
-"olursunuz, sisteminize zarar veremezsiniz.\n"
-"\n"
-"Önce gerçek isminizi girmelisiniz. Bu zorunlu deðildir. Ýstediðiniz bir "
-"zaman\n"
-"bu iþlemi yapabilirsiniz. DrakX girdiðiniz ilk sözcüðü \"Kullanýcý ismi\"\n"
-"olarak alacaktýr. Bu isim ile sisteme giriþ yapacaksýnýz. Ýsterseniz\n"
-"deðiþtirebilirsiniz. Sonra buraya bir parola gireceksiniz. Bir normal\n"
-"kullanýcýnýn parolasý \"root\" parolasý kadar önemli deðildir.\n"
-"\n"
-"\"Kullanýcýyý etkinleþtir\" seçtikten sonra isterseniz baþka kullanýcýlarda\n"
-"ekleyebilirsiniz. Örneðin arkadaþlarýnýzý, babanýzý, kardeþinizi birer\n"
-"kullanýcý olarak ekleyebilirsiniz. Tüm kullanýcýlarýn eklenmesini\n"
-"bitirdiðinizde \"Bitti\" seçerek buradan çýkýnýz. \n"
-"\"Ýleri Ayarlar\" düðmesi ile kullanýcýlarýn kullanacaðý \"kabuk"
-"\" (öntanýmlý\n"
-"olarak bash) deðiþtirilebilir."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Yukarýdakiler, sabit diskinizde bulunan Linux bölümleridir. Genel kullaným\n"
-"için sihirbazýn sunduðu seçenekleri deðiþtirmeden býrakabilirsiniz.\n"
-"Seçenekleri deðiþtirirseniz, en azýndan bir kök dizini (\"/\") tanýmlamak\n"
-"zorundasýnýz. Lütfen çok küçük bir bölüm seçmeyin, istediðiniz tüm\n"
-"uygulamalarý kurabilmek için yeterli yer bulamayabilirsiniz. Verilerinizi\n"
-"ayrý bir bölümde saklamak isterseniz, ayrýca bir \"/home\" bölümü\n"
-"tanýmlamanýz gerekecektir. (Birden fazla Linux bölümü tanýmlýysa bu iþlem\n"
-"gerçekleþebilir.)\n"
-"\n"
-"\n"
-"Her bir bölüm þöyle listelenmiþtir: \"Ýsim\", \"Kapasite\".\n"
-"\n"
-"\n"
-"\"Ýsim\" þöyle kodlanmýþtýr: \"sabit disk türü\", \"sabit disk harfi\"\n"
-"\"bölüm numarasý\" (örneðin \"hda1\").\n"
-"\n"
-"\n"
-"\"Sabit disk türü\", diskiniz bir IDE sürücüsüyse \"hd\",\n"
-"bir SCSI sürücüsüyse \"sd\"'dir.\n"
-"\n"
-"\n"
-"\"Sabit disk harfi\" her zaman \"hd\" ya da \"sd\"'den sonra gelir. IDE\n"
-"sürücüleri için:\n"
-"\n"
-"   * \"a\" birincil IDE denetleyicisindeki master sabit disk,\n"
-"\n"
-"   * \"b\" birincil IDE denetleyicisindeki slave sabit disk,\n"
-"\n"
-"   * \"c\" ikincil IDE denetleyicisindeki master sabit disk,\n"
-"\n"
-"   * \"d\" ikincil IDE denetleyicisindeki slave sabit disk,\n"
-"\n"
-"\n"
-"SCSI sürücüleri için\n"
-"  * \"a\" \"birincil sabit disk\",\n"
-"  * \"b\" \"ikincil sabit disk\"\n"
-"  * ... anlamýna gelir."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux kurulum CD'leri bir kaç CD'den oluþur. DrakX seçilen paketin\n"
-"hangi CD'de olduðunu bilir ve o CD'yi yerleþtirmeniz için CD yuvasýný açar."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Bundan sonra sisteminize hangi uygulamalarý kuracaðýnýzý belirteceksiniz.\n"
-"Mandrake Linux sisteminde kullanýlabilecek binlerce paket vardýr.\n"
-"\n"
-"CD'den kurulum yapýyorsanýz önce elinizde hangi CD'lerin bulunduðunu\n"
-"belirmelisiniz. CD isimlerine bakarak ilgili kutucuklarý seçiniz.\n"
-"Bitirdiðinizde \"Tamam\" seçerek kuruluma devam ediniz.\n"
-"\n"
-"Paketler kullaným amaçlarýna göre gruplanmýþ ve bu gruplar dört bölümde\n"
-"toplanmýþtýr: \n"
-"  * \"Ýþ istasyonu\": makinasýný bir iþ istasyonu olarak ya da evde "
-"kullanmayý\n"
-"                      tasarlayanlar için. \n"
-"  * \"Grafik Ortam\": burada tercih ettiðiniz grafik ortamý seçeceksiniz.\n"
-"                      Bir grafik ortamlý iþ istasyonu için en az bir grafik\n"
-"                      ortam belirlemelisiniz. \n"
-"  *  \"Geliþtirme\": makinanýzý program geliþtirme amacýyla kullanmak\n"
-"                     istiyorsanýz buradaki paketlerden seçim "
-"yapabilirsiniz.\n"
-"\n"
-"  *      \"Sunucu\": makinanýzý bir sunucu olarak kullanmayý "
-"tasarlýyorsanýz\n"
-"                     çok kullanýlan hizmetlerden hangilerini sunacaðýnýzý\n"
-"                     bu paketlerden seçerek belirleyebilirsiniz.\n"
-"\n"
-"Farenizi bir grup isminin üzerine götürdüðünüzde grup hakkýnda kýsa bir\n"
-"açýklama göreceksiniz.\n"
-"\n"
-"\"Geliþmiþ\" düðmesi \"Tek tek paket seçimi\" seçeneðini kullanmanýzý "
-"saðlar.\n"
-"Bu seçenek paketleri tanýyanlar ve sistem üzerinde tam kontrol saðlayabilen\n"
-"uzmanlar için önerilir.\n"
-"\n"
-"\"Güncelleme\" kipinde kurulum baþlattýysanýz, hiçbir yeni paketin\n"
-"kurulmamasýný istiyorsanýz tüm gruplarý seçilmemiþ duruma getirebilirsiniz.\n"
-"Bu iþlem mevcut sisteminizin onarýmý için kullanýþlýdýr."
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Son olarak, tek tek paket seçimini etkinleþtirdiyseniz, paketleri gruplar\n"
-"ve alt gruplar þeklinde sýralanmýþ bir aðaçtan seçebilirsiniz. Aðacý\n"
-"tarayarak grup, alt grup ya da tek tek paket seçimleri yapabilirsiniz.\n"
-"\n"
-"Bir paketi seçtiðinizde sað tarafta paket hakkýnda kýsa bir açýklama "
-"görünür.\n"
-"Paket seçimini bitirdiðinizde \"Kur\" düðmesi ile kurulum iþlemini\n"
-"baþlatabilirsiniz. Kurulum için gereken süre donaným hýzýnýza ve seçtiðiniz\n"
-"paket sayýsýna  baðlýdýr. Kurulumun tahmini bitme süresi bir gösterge ile\n"
-"gösterilecektir. Bu arada koltuðunuza yaslanýp çayýnýzý ya da kahvenizi\n"
-"yudumlayabilirsiniz.\n"
-"\n"
-"<ÖNEMLÝ> Ýster bilerek ister belli bir grubun parçasý olarak, sunucu\n"
-"bölümünden seçtiðiniz hizmetleri gerçekten kullanýp kullanmak istemediðiniz\n"
-"ayrýca sorulacaktýr. Mandrake Linux baþlatýldýðýnda kurulu olan hizmetlerin\n"
-"herbiri öntanýmlý olarak baþlatýlýr. Onlar Mandrake Linux daðýtýma girerken\n"
-"kýlavuzlarýndan güvenli olduklarý anlaþýlarak seçilmiþ bile olsalar,\n"
-"daðýtýmdan sonra bir takým güvenlik açýklarý keþfedilmiþ olabilir.\n"
-"Bir hizmetin ne sunduðu hakkýnda bir fikriniz yoksa ya da neden kurmak\n"
-"gerektiðini bilmiyorsanýz \"Hayýr\", listelenen hizmetlerin kurulmasýný\n"
-"ve otomatik olarak baþlatýlmasýný istiyorsanýz \"Evet\" düðmesine\n"
-"týklayýnýz. </ÖNEMLÝ>\n"
-"\n"
-"Kurulum programýnýn baðýmlý paketleri kendiliðinden saptayýp kurmasý ve\n"
-"uyarý diyaloðunun görünmemesi için basitçe \"Otomatik baðýmlýlýklar\"\n"
-"seçeneðini etkinleþtirebilirsiniz. Kurulumun baþarýyla tamamlanmasý ve\n"
-"kurulan paketlerin sorunsuz çalýþabilmesi için bu paketlerin baðýmlý\n"
-"olduðu paketlerin de kurulmasý gerekir.\n"
-"\n"
-"Listenin altýndaki küçük disket simgesi önceki kurulumda seçilen paketlerin\n"
-"kurulmasýný saðlar. Bu simgeye týkladýðýnýzda önceki kurulumun sonunda\n"
-"oluþturulan bir disketin sürücüye takýlmasý istenecektir. Bu disketin nasýl\n"
-"oluþturulacaðýný öðrenmek için kurulumun son adýmýnýn ikinci ipucuna bakýnýz."
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Makinanýzý Internet'e ya da bir yerel aða baðlamak isterseniz, lütfen doðru\n"
-"seçeneði belirtin. Aygýt makinanýza bir dýþ aygýt olarak baðlýysa lütfen\n"
-"onun enerji almasýný saðlayýn ki DrakX onu algýlayabilsin.\n"
-"\n"
-"Mandrake Linux kurulum sýrasýnda Internet baðlantýsýný yapýlandýrmanýzý\n"
-"saðlayabilir. Baðlantý türleri: Geleneksel modem, ISDN modem, ADSL "
-"baðlantýsý\n"
-", kablo modem ve son olarak basit LAN baðlantýsý (Eternet).\n"
-"\n"
-"Burada her yapýlandýrmanýn ayrýntýsýna girilmeyecektir. Gerekli bilgileri\n"
-"Internet Servis Saðlayýcý'nýzdan ya da Að Yöneticinizden saðlayabilirsiniz.\n"
-"\n"
-"Internet baðlantýsýnýn yapýlandýrýlmasý hakkýndaki bilgileri kýlavuzda\n"
-"bulabilirsiniz. Ya da sistem kurulumu tamamlandýktan sonra kýlavuzda\n"
-"açýklandýðý gibi baðlantýnýzý yapýlandýrabilirsiniz.\n"
-"\n"
-"Aðýnýzýn yapýlandýrmasýný kurulum bittikten sonra kendiniz yapmak\n"
-"istiyorsanýz \"Ýptal\" düðmesine týklayabilirsiniz."
-
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Þimdi, açýlýþ sýrasýnda otomatik olarak baþlamasýný istediðiniz hizmetleri\n"
-"seçebilirsiniz.\n"
-"\n"
-"Burada þu an ki kurulum sýrasýnda kullanabileceðiniz tüm hizmetler\n"
-"listelenmiþtir. Her birini dikkatle okuyun ve açýlýþ sýrasýnda baþlamasýný\n"
-"istemediðiniz hizmetleri seçilmemiþ duruma getirin.\n"
-"Fare bir maddenin üzerine geldiðinde o hizmetin rolünü açýklayan küçük bir\n"
-"baloncuk ortaya çýkacaktýr. Bir hizmetin ne sunduðu hakkýnda bir fikriniz\n"
-"yoksa ayarýna dokunmadan olduðu gibi býrakmak en güvenli yöntemdir.\n"
-"\n"
-"\n"
-"Eðer makinanýzý bir sunucu olarak kullanacaksanýz\n"
-"bu adýmda dikkatli olmalýsýnýz:\n"
-"Muhtemelen kullanmak istemediðiniz hiçbir hizmeti baþlatmak istemezsiniz.\n"
-"Bir sunucuda açýk duruma getirilen hizmetlerin her birinin aslýnda bir\n"
-"güvenlik açýðý olabileceðini lütfen unutmayýnýz.\n"
-"Genel olarak, sadece ihtiyacýnýz olan hizmetleri seçmeye dikkat ediniz."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux zamaný GMT'ye (Greenwich Mean Time) göre ayarlar ve bulunduðunuz \n"
-"bölgedeki zaman dilimine göre gerekli deðiþiklikleri yapar."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-"X (X Pencere Sistemi) Mandrake Linux ile birlikte gelen tüm masaüstü\n"
-"yöneticileri (KDE, GNOME, AfterStep, WindowMaker, v.s.) için GNU/Linux\n"
-"grafik arayüzünün kalbidir. Bu adýmda DrakX , X'i otomatik olarak\n"
-"yapýlandýrmaya çalýþacaktýr.\n"
-"\n"
-"Donanýmýnýz çok eski ya da çok yeni ise büyük ihtimalle baþarýsýz "
-"olacaktýr.\n"
-"Baþarýlý olduðu takdirde monitörünüzün ve ekran kartýnýzýn en iyi "
-"sunabildiði\n"
-"çözümle X'i otomatik olarak baþlatacak ve bir pencerede ki soruyu\n"
-"cevaplandýracaksýnýz.\n"
-"\n"
-"Bir ileti görür ve \"Evet\" düðmesine týklarsanýz sonraki adýma "
-"geçeceksiniz.\n"
-"Bu iletinin görünmemesi yapýlandýrmanýn yanlýþ olduðu anlamýndadýr ve\n"
-"10 saniyelik beklemenin ardýndan bir seçim yapýlmadýðýnda deneme "
-"bitirilerek\n"
-"önceki ekrana geri dönülür.\n"
-"\n"
-"\"Uzman\" kurulumu yapýyorsanýz otomatik yapýlandýrma yerine X yapýlandýrma\n"
-"sihirbazýna gireceksiniz. Bu sihirbaz hakkýnda daha ayrýntýlý bilgi edinmek\n"
-"için kýlavuzda ki ilgili bölümü okuyabilirsiniz."
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"X yapýlandýrmasýný ilk kez deniyorsanýz, ekraný size pek kullanýþlý\n"
-"gelmeyebilir (küçük, saða ya da sola kaymýþ bir ekran). X doðru olarak\n"
-"baþlatýldýktan sonra, DrakX yapýlandýrmanýn sizce uygun olup olmadýðýný\n"
-"soracaktýr. Ayrýca geçerli kiplerin bir listesini sunarak yapýlandýrmanýzý\n"
-"deðiþtirebilmeniz için birini seçmenizi isteyecektir.\n"
-"\n"
-"Hala X çalýþmýyorsa, son çare olarak \"Ekran kartýný deðiþtir\" seçtikten "
-"sonra\n"
-"\"listelenmemiþ kart\" seçin ve hangi sunucuyu kullanmak istediðiniz\n"
-"sorulduðunda ise \"FBDev\" seçiniz. Bu her modern ekran kartýyla "
-"çalýþabilen\n"
-"son çare bir X sunucusudur. Emin olmak için \"Tekrar dene\" seçiniz."
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Son olarak açýlýþ sýrasýnda grafik arayüzle baþlamak isteyip istemediðiniz\n"
-"sorulacaktýr. Yapýlandýrmanýzý denemeyi seçmemiþ bile olsanýz bu soru yine "
-"de\n"
-"sorulacaktýr. Ekranýnýzý iyi yapýlandýramamýþsanýz ya da makinanýzýn bir\n"
-"sunucu rolü üstlenmesini seçmiþseniz bu soruya \"Hayýr\" cevabý vermeniz\n"
-"önerilir."
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux CD'si içinde bir kurtarma kipi bulunmaktadýr. Kurtarma "
-"kipine\n"
-"CD'den baþlatýrken »F1« tuþuna bastýktan sonra isteðiniz sorulduðunda\n"
-"»rescue« yazarak eriþebilirsiniz. Ancak bu seçimle makinanýz CD'den\n"
-"açýlmaz, bunun yerine en az iki olasýlýktan birini seçmeniz gerekir:\n"
-"\n"
-" * Önyükleyicinin ana diskinizin ilk sektörüne yazýlmasý (baþka bir açýlýþ\n"
-"   yöneticisi kullanmýyorsanýz): GNU/Linux ve Windows ayný makina üzerinde\n"
-"   kurulu ise ve Windows'u yeniden kurmak istediðinizde MS kurulum programý\n"
-"   diskin önyükleme bölümünü yeniden yazar. Bu durumda GNU/Linux "
-"baþlatýlamaz.\n"
-"\n"
-" * Herhangi bir sebepten dolayý GNU/Linux sabit diskten açýlmýyorsa bir "
-"açýlýþ\n"
-"   disketi ile sisteminizi açabilirsiniz. Elektrik kesintisi, hatalý bir "
-"iþlem\n"
-"   sonucu olarak, bir parola sorunu ya da öngörülmeyen bir sebeple "
-"sisteminiz\n"
-"   açýlýþ sýrasýnda bir noktadan daha ileri gidemiyorsa sisteminizi "
-"kurtaracak\n"
-"   araçlarý içeren bu disketi kullanabilirsiniz.\n"
-"\n"
-"Bu son adýmý seçerseniz sizden sürücüye bir disket yerleþtirmeniz\n"
-"istenecektir. Bu disket boþ olmalý ya da size gerekecek bilgiler\n"
-"içermemelidir. DrakX disketi yazmayý bitirdikten sonra artýk o disketi\n"
-"biçemlendiremeyeceksiniz."
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Bu noktada, Mandrake Linux iþletim sisteminizi sabit diskinizde\n"
-"nereye kuracaðýnýzý seçmeniz gerekiyor. Diskiniz boþsa, ya da\n"
-"halihazýrda bir iþletim sistemi diskin tamamýný kullanýyorsa\n"
-"diski bölümlendirmeniz gerekmektedir. Temel olarak, bir diski\n"
-"bölümlendirmek, Mandrake Linux sistemini kurabilmek için onu\n"
-"mantýksal olarak bölmek ve böylece boþ alan oluþturmak anlamýna\n"
-"gelir.\n"
-"\n"
-"\n"
-"Bölümlendirme iþleminin etkilerinin geri dönülmezliði yüzünden\n"
-"bu iþlem, eðer tecrübesizseniz, korkutucu ve stresli bir iþ olabilir.\n"
-"Mandrake Linux, bu iþlemi oldukça kolaylaþtýran bir sihirbaz sunmaktadýr.\n"
-"Baþlamadan önce lütfen kýlavuzu okuyun.\n"
-"\n"
-"Uzman kipinde kurulum yapýyorsanýz Mandrake Linux Disk Bölümlendirme Aracý\n"
-"DiskDrake'i kullanabilirsiniz. DiskDrake hakkýnda ayrýntýlý bilgi edinmek\n"
-"için kýlavuzun ilgili bölümünü okuyabilirsiniz. Ayrýca kurulum arayüzünden\n"
-"dialoðun \"Sihirbaz\" düðmesine týklayarak burada açýklanan sihirbazlarý da\n"
-"kullanabilirsiniz.\n"
-"\n"
-"Önceki bir Linux kurulumunda ya da baþka bir sistemin disk bölümlendirme\n"
-"aracýný kullanarak disk bölümlendirmenizi zaten yapmýþsanýz Linux\n"
-"sisteminizi kurmak için basitçe bir disk bölümü seçiniz.\n"
-"\n"
-"Disk bölümlendirmesi yapýlmamýþsa sihirbazý kullanarak bu bölümleri\n"
-"oluþturabilirsiniz. Sabit disk yapýlandýrmanýza baðlý olarak aþaðýdaki\n"
-"seçeneklerden birini kullanabilirsiniz:\n"
-"\n"
-" * \"Boþ alan kullanýlsýn\": bu seçenek ile boþ sabit disklerinizden biri\n"
-"   üzerinde otomatik bölümlendirme yapýlacak, size bir þey sorulmayacaktýr.\n"
-"\n"
-" * \"Mevcut disk bölümü kullanýlsýn\": sihirbazýn sabit diskinizde bulduðu\n"
-"   Linux disk bölümlerinden birini kullanmak istiyorsanýz bu seçeneði\n"
-"   kullanýn.\n"
-" * \"Windows'un bulunduðu bölümdeki boþ alan kullanýlsýn\": sabit "
-"diskinizde\n"
-"   MS Windows kurulu ve diskin tamamý ona ayrýlmýþsa ancak diskte boþ yer\n"
-"   varsa bu seçeneði kullanarak boþ kalan yerde Linux disk bölümü\n"
-"   oluþturulabilir. Bunu yapmak için MS Windows'u silebilir (\"Tüm Diski\n"
-"   sil\" veya \"Uzman kip\" çözümlerini kullanarak) ya da MS Windows disk\n"
-"   bölümünü yeniden boyutlandýrabilirsiniz. Yeniden boyutlandýrma veri\n"
-"   kaybýna sebep olmadan gerçekleþtirilebilir. Makinanýzda hem MS Windows\n"
-"   hem de Mandrake Linux kullanacaksanýz bu çözümü kullanmanýz önerilir.\n"
-"\n"
-"   Bu seçeneði kullanacaksanýz bu iþlemden sonra MS Windows için ayrýlan\n"
-"   yerin azalacaðýný gözönüne almanýz gerekir.\n"
-"\n"
-" * \"Tüm diski sil\": bu seçeneði kullanarak sabit diskinizdeki tüm veriyi "
-"ve\n"
-"   disk bölümlerini kaldýrabilir yerine Mandrake Linux sistemini\n"
-"   yerleþtirebilirsiniz. Seçimi onayladýktan sonra artýk geri dönüþ mümkün\n"
-"   olmayacaðýný bu seçeneði kullanýrken aklýnýzdan çýkarmayýn.\n"
-"\n"
-"   !! Bu seçeneði kullandýðýnýz takdirde diskinizdeki tüm verilerinizi\n"
-"   kaybedeceksiniz. !!\n"
-"\n"
-" * \"Windows'u Sil\": bu seçenek ile sabit diskinizdeki herþey silinecek ve\n"
-"   temiz bir disk üzerine yeniden bölümlendirme yapýlacaktýr.\n"
-"\n"
-"   !! Bu seçeneði kullandýðýnýz takdirde diskinizdeki tüm verilerinizi\n"
-"   kaybedeceksiniz. !!\n"
-"\n"
-" * \"Uzman kipi\": sabit diskiniz kendiniz elle bölümlendirmek istiyorsanýz\n"
-"   bunu seçeneði kullanabilirsiniz. Bu çözümü seçmeden önce dikkatli olun.\n"
-"   Güçlü bir çözüm olduðu kadar tehlikelidir de. Tüm verilerinizi kolayca\n"
-"   kaybedebilirsiniz. Bu nedenle ne yaptýðýnýzý tam olarak bilmediðiniz\n"
-"   sürece bunu seçmeyin."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Buraya kadar geldiyseniz kurulum tamamlanmýþ ve GNU/Linux sisteminizi\n"
-"kullanmaya hazýrsýnýz demektir. \"TAMAM\" düðmesine týkladýðýnýzda "
-"sisteminiz\n"
-"yeniden baþlatýlacaktýr. Hem Windows hem de GNU/Linux kullanýmýný "
-"seçtiyseniz\n"
-"makinanýzýn her açýlýþýnda bu sistemlerden biri için tercihinizi\n"
-"kullanabileceksiniz.\n"
-"\n"
-"\"Geliþmiþ\" düðmesine týladýðýnýzda size iki seçenek sunulacaktýr:\n"
-"\n"
-" * \"Otomatik kurulum disketi oluþturulsun\": yaptýðýnýz kuruluma benzer "
-"bir\n"
-"   kurulumu herhangi bir yardým gerekmeksizin otomatik olarak "
-"yapýlabilmesini\n"
-"   saðlayacak bir kurulum disketi oluþturabilirsiniz.\n"
-"\n"
-"   Bu seçeneði kullanmaya karar verdiðinizde size iki seçenek sunulacaktýr:\n"
-"\n"
-"    * \"Etkileþimli\": bu sadece disk bölümlemesinin etkileþimli olduðu "
-"yarý\n"
-"      otomatik kurulumdur.\n"
-"\n"
-"    * \"Otomatik\": bu seçenek sabit diskin tamamen silinip yeniden "
-"yazýlmasý\n"
-"      ile kurulumu tamamen otomatik olarak gerçekleþtirebilirsiniz.\n"
-"\n"
-"      Bu seçenek ayný sistemi çok sayýda makinaya kurmak için çok\n"
-"      kullanýþlýdýr. Web sitemizde ki \"Auto install\" bölümünde daha\n"
-"      ayrýntýlý bilgi edinebilirsiniz.\n"
-"\n"
-" * \"Paket seçim listesini kaydet\"(*): kurulum sýrasýnda seçtiðiniz\n"
-"   paketlerin listesi kaydedilir. Bir baþka kurulum sýrasýnda disketi\n"
-"   sürücüye yerleþtirdikten sonra [F1] tuþuna bastýktan sonra\n"
-"   »linux defcfg=\"floppy\"« yazarak kurulumu yardým ekranýna kadar "
-"ilerletin\n"
-"\n"
-"   (*) Bu seçenek için FAT biçemli bir diskete ihtiyacýnýz olacak. Bu "
-"disketi\n"
-"   GNU/Linux altýnda \"mformat a:\" komutu ile oluþturabilirsiniz."
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"Yeni tanýmlanmýþ her bölüm, kullaným için biçemlendirilmelidir.\n"
-" (Biçemlendirmek bir dosya sistemi oluþturmak anlamýna gelir.)\n"
-"\n"
-"\n"
-"Þimdi, halihazýrda bulunan bölümlerinizdeki verileri silmek için onlarý\n"
-"tekrar biçemlendirmek isteyebilirsiniz. Bunu istiyorsanýz, biçemlendirmek\n"
-"istediðiniz bu bölümleri de ayrýca seçili duruma getirin.\n"
-"\n"
-"Eskiden kalma tüm bölümlerin biçemlendirilmesi gerekmediðini lütfen\n"
-"unutmayýn. Ýþletim sistemi içerenleri (örneðin \"/\", \"/usr\" ya da \"/var"
-"\"\n"
-"gibi) biçemlendirmelisiniz, ama sadece verilerinizin bulunduðu bölümleri\n"
-"biçemlendirmeyebilirsiniz. (örneðin \"/home\".)\n"
-"\n"
-"Biçemlendireceðiniz bölümleri seçerken dikkatli olun, içlerindeki tüm "
-"veriler\n"
-"yok olacaktýr ve biçemlendirildikten sonra geri dönülmesi mümkün deðildir.\n"
-"\n"
-"Bölümleri biçemlendirmeye hazýr olduðunuzda \"Tamam\"'a týklayýn.\n"
-"\n"
-"Mandrake Linux sisteminizi kurmak isteyeceðiniz baþka bölümler de seçmek\n"
-"isterseniz \"Ýptal\"'e basýn.\n"
-"\n"
-"\"Geliþmiþ\" düðmesine týkladýktan sonra isterseniz, sabit diskinizinde ki\n"
-"disk bölümlerinde hatalý blok sýnamasý yapabilirsiniz."
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Yeni Mandrake Linux iþletim sisteminiz þu anda diske yazýlýyor. Bu iþlem\n"
-"birkaç dakika sürecektir. (Bu süre, seçtiðiniz kurulumun büyüklüðüne\n"
-"ve donanýmýnýzýn hýzýna baðlýdýr.)\n"
-"\n"
-"Lütfen bekleyin."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"Devam etmeden önce lisans koþullarýný dikkatle okumalýsýnýz. Lisans tüm\n"
-"Mandrake Linux daðýtýmýný kapsar, bu koþullarýný kabul etmiyorsanýz \"Red\"\n"
-"düðmesine týklayarak kurulumdan çýkabilirsiniz. Kuruluma devam etmek için\n"
-"\"Kabul\" düðmesine týklayýnýz."
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Þimdi, makinanýz için düþündüðünüz güvenlik seviyesini belirteceksiniz. "
-"Kural\n"
-"olarak makinanýzda sakladýðýnýz bilgilere baðlý olarak güvenlik seviyesini\n"
-"yükselmek gerekir. Güvenlik seviyesi yükseldikçe sunulan hizmetlerin sayýsý\n"
-"düþecek ve sisteminizi kullanmak zorlaþacaktýr. Bu seviyeler hakkýnda daha\n"
-"fazla bilgi edinmek için ``Baþvuru Kýlavuzu''ndaki MSEC bölümüne bakýnýz.\n"
-"\n"
-"Ne seçeceðiniz hakkýnda bir fikriniz yoksa öntanýmlý seçeneklere "
-"dokunmayýnýz."
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Bu noktada, Mandrake Linux iþletim sisteminizi sabit diskinizde nereye\n"
-"kuracaðýnýzý seçmeniz gerekiyor. Bölümler önceki bir kurulumda ya da bir\n"
-"baþka bölümlendirme aracýyla önceden tanýmlanmýþsa eski bölümlerinizi\n"
-"kullanabilirsiniz. Aksi takdirde, sabit disk bölümlerinin tanýmlanmasý\n"
-"gerekir.\n"
-"\n"
-"Bölümleri oluþturmak için bir sabit disk seçmelisiniz. \"hda\"'ya\n"
-"týklayarak ilk, \"hdb\"'ye týklayarak ikinci IDE sürücüsünü, ya da\n"
-"\"sda\"'ya týklayarak birinci SCSI sürücüsünü bölümlendirmek için\n"
-"seçebilirsiniz.\n"
-"\n"
-"Seçili sürücüyü bölümlendirmek için, aþaðýdaki seçenekleri\n"
-"kullanabilirsiniz:\n"
-"\n"
-"   * \"Tümünü temizle\": seçili sürücüdeki tüm bölümler silinecektir.\n"
-"\n"
-"   * \"Otomatik bölümlendir\": sabit diskinizdeki boþ alanda otomatik\n"
-"     olarak ext2 ve takas bölümlerinin tanýmlanmasýný saðlayacaktýr.\n"
-"\n"
-"   * \"Bölümlendirme tablosunu kurtar\": bölümlendirme tablosu hasar "
-"gördüyse\n"
-"     bu seçeneði kullanarak onu kurtarabilirsiniz. Lütfen dikkatli olun ve\n"
-"     baþarýsýz olma ihtimali olduðunu hatýrlayýn.\n"
-"\n"
-"   * \"Geri al\": bu seçeneði kullanarak, daha önce yaptýðýnýz\n"
-"     deðiþikliklerden vazgeçebilirsiniz.\n"
-"\n"
-"   * \"Tekrar yükle\": bu seçeneði kullanarak, yaptýðýnýz tüm "
-"deðiþiklikleri\n"
-"     geri alýp eski bölümlendirme tablosunu yükleyebilirsiniz.\n"
-"\n"
-"   * \"Sihirbaz\": sabit diskinizi bölümlendirme iþlemi için sihirbazý\n"
-"     kullanmak isterseniz, bu seçeneði kullanabilirsiniz. Bölümlendirme\n"
-"     hakkýnda fazla bir bilgiye sahip deðilseniz bu seçeneði kullanmanýz\n"
-"     önerilir.\n"
-"\n"
-"   * \"Disketten al\": önceki bir kurulumda bölümlendirme tablonuzu bir\n"
-"     diskete kaydettiyseniz, bu seçenek ile onu tekrar kullanabilirsiniz.\n"
-"\n"
-"   * \"Diskete kaydet\": bölümlendirme tablonuzu diskete kaydetmek "
-"isterseniz\n"
-"     bu seçeneði kullanýn. Ýleride disk bölümlendirme tablosunu kurtarmak\n"
-"     için bu disketi kullanabilirsiniz.\n"
-"\n"
-"   * \"Bitti\": sabit diskinizi bölümlendirme iþlemi bittiðinde\n"
-"     deðiþikliklerinizin kaydedilebilmesi için bu seçeneði kullanýn.\n"
-"\n"
-"Klavyeyi kullanarak herhangi bir seçeneðe gidebilirsiniz: Bölümler\n"
-"arasýnda gezinmek için [Sekme] ve [Yukarý/Aþaðý] ok tuþlarýný\n"
-"kullanabilirsiniz.\n"
-"\n"
-"Bir bölüm seçildiðinde, aþaðýdaki tuþlarý kullanabilirsiniz:\n"
-"\n"
-"           * yeni bir bölüm oluþturmak için (boþ bir bölüm seçildiðinde)\n"
-"             Ctrl-c,\n"
-"\n"
-"           * bir bölümü silmek için Ctrl-d,\n"
-"\n"
-"           * baðlama noktasýný atamak için Ctrl-m\n"
-"Bir PPC makina üzerine kurulum yapýyorsanýz, yaboot önyükleyicisi "
-"tarafýndan\n"
-"kullanýlmak üzere en az 1MB lýk küçük bir HFS \"önyükleme\" bölümü "
-"oluþturmak\n"
-"isteyeceksiniz. Bu disk bölümünü biraz daha büyük, örneðin 50MB yaparsanýz\n"
-"bir yedek çekirdek ve kurtarma açýlýþý gereksinimleri için ramdisk\n"
-"görüntüsünü saklamak için kullanýþlý bir alan elde edebilirsiniz."
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Sabit diskinizde birden fazla Windows bölümü bulundu. Yeni Mandrake Linux\n"
-"iþletim sisteminizi kurmak için hangi bölümün boyutunu deðiþtirmek\n"
-"istiyorsunuz?\n"
-"\n"
-"\n"
-"Her bir bölüm þöyle listelenmiþtir; \"Linux adý\", \"Windows adý\",\n"
-"\"Kapasite\".\n"
-"\n"
-"\"Linux adý\" þöyle kodlanýr: \"sabit disk türü\", \"sabit disk harfi\", \n"
-"\"bölüm numarasý\" (örneðin \"hda1\").\n"
-"\n"
-"\"Sabit disk türü\", diskiniz bir IDE sürücüsüyse \"hd\", bir SCSI "
-"sürücüsüyse\n"
-"\"sd\"'dir.\n"
-"\n"
-"\n"
-"\"Sabit disk harfi\" her zaman \"hd\" ya da \"sd\"'den sonra gelir. IDE\n"
-"sürücüleri için:\n"
-"\n"
-"   * \"a\"   \"birincil IDE denetleyicisindeki master sabit disk \",\n"
-"\n"
-"   * \"b\"   \"birincil IDE denetleyicisindeki slave sabit disk \",\n"
-"\n"
-"   * \"c\"   \"ikincil IDE denetleyicisindeki master sabit disk \",\n"
-"\n"
-"   * \"d\"   \"ikincil IDE denetleyicisindeki slave sabit disk \",\n"
-"\n"
-"\n"
-"SCSI sürücüleri için\n"
-"   * \"a\"   \"birincil sabit disk\",\n"
-"   * \"b\"   \"ikincil sabit disk\"\n"
-"   * ... anlamýna gelir.\n"
-"\n"
-"\"Windows adý\" ise diskinizin windows altýndayken kullandýðý sürücü "
-"harfidir.\n"
-"(Örneðin ilk disk ya da disk bölümünün ismi \"C:\"dir."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Lütfen bekleyin. Bu iþlem birkaç dakika sürecektir."
-
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"DrakX'e bir öntanýmlý \"Önerilen\" kurulum mu yoksa üzerinde daha fazla\n"
-"denetim saðlayabileceðiniz \"Uzman\" kurulumunu mu tercih edeceðinizi\n"
-"belirtmelisiniz. Ayrýca yeni bir kurulum mu yapacaðýnýzý yoksa mevcut\n"
-"sisteminizi güncellemek mi istediðinizi de belirtmelisiniz. \"Kurulum\"\n"
-"seçerek eski sisteminizi tamamen yok edebilir ya da \"Güncelleme\"\n"
-"seçerek mevcut sisteminizi güncelleyebilir ya da kurtarabilirsiniz.\n"
-"\n"
-"Eðer sisteminizde Mandrake Linux'un eski bir sürümü yoksa, ya da \n"
-"birden çok sistem kullanmak istiyorsanýz lütfen\"Kurulum\"'u seçiniz\n"
-"\n"
-"Mandrake Linux'un eski bir sürümünü güncellemek ya da onarmak istiyorsanýz\n"
-"lütfen \"Güncelleme\"'yi seçiniz.\n"
-"\n"
-"Mandrake Linux iþletim sistemini kurmak ya da güncellemek için GNU/Linux\n"
-"hakkýndaki deneyiminize baðlý olarak aþaðýdaki düzeylerden birini\n"
-"seçebilirsiniz:\n"
-"\n"
-" * \"Önerilen\": daha önce hiçbir GNU/Linux iþletim sistemi kurmadýysanýz\n"
-"   bunu seçin. Kurulumda çok az soru sorulacak ve çok kolay olacaktýr.\n"
-"\n"
-"\n"
-" * \"Uzman\": GNU/Linux hakkýnda oldukça bilgili ve deneyimliyseniz bunu\n"
-"   seçebilirsiniz. Uzman kurulumu sisteminizi özelleþtirebilmeniz için\n"
-"   cevaplandýrýlmasý GNU/Linux'u az bilenler için çok güç olabilecek\n"
-"   sorularla kurulumu yönlendireceðinden bu sorulara cevap verebilecek\n"
-"   kadar iyi olmadýðýnýz kanaatindeyseniz bu seçeneði kullanmayýn."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalde seçtiðiniz dile baðlý olarak DrakX, doðru klavyeyi seçecektir.\n"
-"Ancak dilinizle iliþkili olmayan bir klavye seçmek de isteyebilirsiniz.\n"
-"Örneðin Türkçe konuþan biri olmanýza raðmen Almanya'da ikamet ediyorsanýz\n"
-"Türkçe klavyeyi kullanmak isteyebileceðiniz gibi Türkçe Q ya da Türkçe F\n"
-"klavyelerden birini seçmek de isteyebilirsiniz. Her iki durumda da bu "
-"adýmdan\n"
-"geriye gidip listeden kullanmak istediðiniz klavyeyi seçebilirsiniz.\n"
-"\n"
-"\"Baþka\" düðmesine týklayarak klavyelerin tam listesini görebilirsiniz."
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-"Lütfen kurulumda ve kurulumdan sonra sisteminizde kullanacaðýnýz dili "
-"seçin.\n"
-"\n"
-"\"Geliþmiþ\" düðmesine týkladýðýnýzda makinanýzda kurulmasýný istediðiniz\n"
-"diðer dilleri de seçmeniz saðlanacaktýr. Bu dilleri seçtiðinizde kurulum\n"
-"sýrasýnda belgelerden ve uygulamalardan bu dillerde olanlarý varsa onlar\n"
-"kurulacaktýr. Örneðin Alman kullanýcýlarýn sisteminizi kullanmasýna izin\n"
-"verecekseniz, ana dili Türkçe seçtikten sonra Geliþmiþ bölümünde\n"
-"\"Almanca|Almanya\" seçebilirsiniz.\n"
-"\n"
-"Çok sayýda dil seçimi yapýyorsanýz, ek dil seçiminden sonra \"Tamam\" "
-"düðmesine\n"
-"týklayarak kuruluma devam edebilirsiniz."
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-"Öntanýmlý olarak DrakX, iki düðmeli fare kullandýðýnýzý ve 3. düðmenin "
-"taklit\n"
-"edilmesini istediðiniz varsayýmýna göre yapýlandýrýlmýþtýr. DrakX otomatik\n"
-"olarak kullandýðýnýz farenin PS/2 mu, seri mi yoksa USB fare mi olduðunu\n"
-"saptayacaktýr.\n"
-"\n"
-"Farklý bir fare türü seçmek isterseniz listeden bu fareyi seçebilirsiniz.\n"
-"\n"
-"Öntanýmlý fare dýþýnda bir fare seçtiðiniz takdirde seçiminizi denemeniz "
-"için\n"
-"bir deneme ekraný açýlacaktýr. Farenizin topunu hareket ettirerek ve "
-"düðmelere\n"
-"basarak seçiminizin doðruluðunu deneyebilirsiniz. Fareniz doðru "
-"çalýþmýyorsa\n"
-"boþluk çubuðuna basarak ya da \"Ýptal\" düðmesi üzerinde ENTER tuþlayarak\n"
-"ekrandan çýkýp tekrar seçim yapabilirsiniz."
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Lütfen doðru portu seçiniz. Örneðin, MS Windows'da ki 'COM1'in karþýlýðý\n"
-"GNU/Linux'ta 'ttyS0', 'COM2'nin karþýlýðý 'ttyS1'dir."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"GNU/Linux sisteminizin güvenliði için çok önemli karar noktasýndasýnýz:\n"
-"\"root\" parolasýný gireceksiniz.\n"
-"\"root\" sistem yöneticisidir ve güncellemeler, kullanýcýlarýn eklenmesi,\n"
-"sistemin yapýlandýrýlmasý, v.s. için en yetkili kullanýcýdýr. Kýsaca,\n"
-"\"root\" herþeyi yapabilir! Bu nedenle tahmin edilmesi çok zor olan bir\n"
-"parola seçmelisiniz. - DrakX bu parolanýn seçim kriterlerinde size yardýmcý\n"
-"olarak bu zor kararý kolaylaþtýracaktýr. Göreceðiniz gibi bir parola "
-"vermemeyi\n"
-"de seçebilirsiniz. Fakat tek bir sebep gösterek bu kararý almamanýz\n"
-"saðlanacaktýr: GNU/Linux'un diðer iþletim sistemlerinden farký normal\n"
-"kullanýcýlarýnýn sisteme zarar verememelerinin saðlanmýþ olmasýdýr. Sisteme\n"
-"zarar verebilecek tek kullanýcý \"root\"dur. Bu bakýmdan sistemde\n"
-"\"root\" kullanýcýsý olmak zorlaþtýrýlmalýdýr.\n"
-"\n"
-"Parolayý çok uzun ve çok karmaþýk yapmayýn ki hatýrlamasý zor olmasýn.\n"
-"\n"
-"Parolayý yazarken ekranda görmeyeceksiniz. Bu bakýmdan yazdýðýnýzýn\n"
-"doðruluðunu ancak yeniden yazarak anlayabilirsiniz. Ýkincisini yazarken\n"
-"hata yaparsanýz DrakX sizi uyaracaktýr. Ama hatayý ikisinde de yapar ve\n"
-"farkýnda olmazsanýz bu \"yanlýþ\" parola ile sisteme giriþ yapAMAmak\n"
-"zorunda kalabilirsiniz.\n"
-"\n"
-"Uzman kipte NIS ya da LDAP gibi bir kimlik kanýtlama sunucusuna baðlanýp\n"
-"baðlanmayacaðýnýz sorulacaktýr.\n"
-"\n"
-"Aðýnýzda kimlik sýnamasý için \"LDAP\" (ya da \"NIS\") protokolü\n"
-"kullanýlýyorsa ilgili protokolü seçmelisiniz. Bu konuda bilginiz yoksa\n"
-"að yöneticinize danýþýn.\n"
-"\n"
-"Makinanýz herhangi bir yönetimli aða baðlanmayacaksa, kimlik kanýtlama için\n"
-"\"Yerel dosyalar\"ý seçeceksiniz."
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-"LILO ve GRUB GNU/Linux'un önyükleyicileridir. Bu adým normalde otomatiktir.\n"
-"Bu adýmda DrakX, diskin önyükleme bölümünü çözümler ve aþaðýdaki iþlemleri\n"
-"gerçekleþtirir:\n"
-"\n"
-" * MS Windows önyükleme sektörü varsa, sektörün içeriði GRUB/LILO ile\n"
-"   deðiþtirilir. Bu iþlem hem GNU/Linux hem de diðer iþletim sistemi\n"
-"   ile makinanýzý kullanabilmenizi saðlar.\n"
-"\n"
-" * Bir GRUB ya da LILO önyükleme sektörü varsa, içeriði yeni önyükleyici "
-"ile\n"
-"   deðiþtirilecektir.\n"
-"\n"
-" * Bir ikilem olmasý halinde, DrakX bir dialog ile sizden yardým "
-"isteyecektir:\n"
-"\n"
-"  * \"Kullanýlacak önyükleyici\" için üç seçenek sunulacaktýr: \n"
-"    * \"Grafik arayüzlü LILO\"\n"
-"\n"
-"    * \"GRUB\" (sadece metin arayüzlü)\n"
-"\n"
-"    * \"Metin arayüzlü LILO\"\n"
-"\n"
-"  * \"Önyükleme aygýtý\": genellikle öntanýmlý birincil sabit disk\n"
-"    (\"/dev/hda\") kullanýlýr. Ancak tercihiniz ikincil sabit disk\n"
-"    (\"/dev/hdb\") ya da disket (\"/dev/fd0\") olabilir.\n"
-"\n"
-"  * \"Öntanýmlý görüntü yüklenmeden önceki gecikme\": makinanýzý\n"
-"    baþlattýðýnýz sýrada önyükleyici, öntanýmlý yüklenecek sistem yerine\n"
-"    baþka bir sistemden baþlatabilmenize olanak saðlayacak bir bekleme\n"
-"    süresi belirtmenize izin verir.\n"
-"\n"
-"!! DÝKKAT: Bir önyükleyici kurmamayý seçtiyseniz (burada \"Ýptal\"\n"
-"           seçerek), Mandrake Linux sisteminizin yüklenmesini saðlayacak\n"
-"           bir yönteminiz olduðundan emin olmalýsýnýz. Ayrýca bir seçeneði\n"
-"           deðiþtirirken ne yaptýðýnýzý bildiðinizden de emin "
-"olmalýsýnýz. !!\n"
-"\n"
-"Uzman kullanýcýlar daha fazla seçenek elde etmek için \"Geliþmiþ\" "
-"düðmesini\n"
-"kullanabilirler.\n"
-"\n"
-"Mandrake Linux gerek GNU/Linux gerekse diðer bir iþletim sisteminden\n"
-"açýlýþ yaapabilmeniz için kendi önyükleyicisini kurar.\n"
-"\n"
-"Makinanýzda baþka iþletim sistemleri de varsa, onlar otomatikman önyükleme\n"
-"menüsüne eklenecektir. Burada sunulan seçeneklerle önyükleyicinin ince\n"
-"ayarlarýný yapabilirsiniz. Bir seçenek üzerine çift týklayarak onun\n"
-"parametrelerini silebilir ya da deðiþtirebilirsiniz. \"Ekle\" düðmesi ile\n"
-"yeni bir girdi ekleyebilirsiniz. Ýþlemlerinizi tamamladýðýnýzda \"Bitti\"\n"
-"düðmesine týklayarak sonraki kurulum adýmýna geçebilirsiniz."
-
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO ve Grub önyükleyicilerdir: GNU/Linux ya da makinanýzda bulunan baþka "
-"bir\n"
-"iþletim sistemini açabilirler. Normalde bu diðer iþletim sistemleri doðru\n"
-"þekilde saptanmýþ ve kurulmuþtur. Eðer bir aksilik olursa, buradan elle\n"
-"eklenebilirler. Parametreleri seçerken dikkatli olun.\n"
-"\n"
-"Ayrýca isterseniz diðer iþletim sistemlerine eriþim vermeyebilirsiniz\n"
-"Bu durumda ilgili girdileri silebilirsiniz. Fakat bu iþletim sistemlerini\n"
-"kullanabilmek için bu sistemlerin açýlýþ disketlerine sahip olmanýz\n"
-"gerektiðini de unutmayýnýz!"
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"GNU/Linux'u açmak için gereken bilgilerin nereye yerleþtirileceðini\n"
-"belirtmelisiniz.\n"
-"\n"
-"Ne yaptýðýnýzdan emin deðilseniz, \"Diskin ilk sektörü (MBR)\" seçin."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Burada kullanacaðýnýz yazdýrma sistemini seçeceksiniz. Diðer iþletim\n"
-"sistemleri bir seçenek sunarken, Mandrake size üç ayrý seçenek sunuyor.\n"
-"\n"
-" * \"PDQ\" - bir að yazýcýsý kullanmýyorsanýz, yazýcýnýn kaðýt yemesi\n"
-"   durumunda tekrar yazdýrma sorunu yaþamak istemiyorsanýz, bir de "
-"makinanýza\n"
-"   doðrudan baðlý bir yazýcýnýz varsa, 'kuyruða deðil doðrudan yazýcýya "
-"yolla'\n"
-"   deme þansýnýz bulunuyor. 'Bu tam da benim aradýðým özellik' diyorsanýz\n"
-"   \"PDQ\" seçeneðine týklayýnýz. Kurulumdan sonra Mandrake Kontrol \n"
-"   Merkezi'nden PrinterDrake'i çalýþtýrdýktan sonra uzman düðmesine "
-"týklayarak\n"
-"   seçimlerinizi deðiþtirebilirsiniz.\n"
-"\n"
-" * \"CUPS\" - 'Unix Ortak Yazdýrma Sistemi' - hem yerel yazýcýnýzý hem de "
-"að\n"
-"   üzerindeki bir yazýcýyý kullanabilmenizi saðlayan, mevcut tüm "
-"sistemlerle\n"
-"   uyumlu, eski \"lpd\" yazdýrma sistemi için hem sunucu hem de istemci "
-"gibi\n"
-"   davranabilen, basit ama mükemmel bir sistemdir. Çok çeþitli seçenekler\n"
-"   sunmasýna raðmen en az \"pdq\" kadar kolay ayarlanabilir. Bir \"lpd\"\n"
-"   sunucusunu taklit etmek isterseniz \"cups-lpd\" artalan uygulamasýný\n"
-"   çalýþtýrabilirsiniz. Yazdýrma ve yazýcý seçeneklerini belirlemek için\n"
-"   bir grafik arayüze de sahiptir.\n"
-"\n"
-" * \"lprNG\" - 'Yeni Nesil lpd' - Bu sistem diðerlerinin yaptýklarýný\n"
-"   yapabilmekten baþka IPX protokolünü de desteklediðinden bir Novell "
-"aðýnda\n"
-"   baðlý yazýcýlarý ve komutlarý kullanmanýzý saðlar. Novell aðýnýzdaki\n"
-"   yazýcýlarý kullanmak isterseniz ya da ayrý bir veri yolu oluþturmaksýzýn\n"
-"   komutlara yazdýrmak isterseniz lprNG'yi kullanýnýz. Aksi takdirde,\n"
-"   aðlar üzerinden çalýþmak için daha iyi ve daha basit olduðundan\n"
-"   CUPS tercih edilmelidir."
-
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX PCI ve SCSI kartlarýnýzý tarayarak IDE aygýtlarýnýzý bulmaya "
-"çalýþacak.\n"
-"Eðer bir SCSI arabirimi bulursa otomatik olarak bunun sürücüsünü "
-"kuracaktýr.\n"
-"\n"
-"Hiç SCSI arabiriminiz yoksa, bir ISA SCSI kartýnýz varsa, ya da\n"
-"DrakX'in tanýmadýðý bir PCI SCSI kartýnýz bulunuyorsa, sisteminizde bir\n"
-"SCSI kartýnýzýn olup olmadýðý sorulacaktýr. Bir SCSI kartýna sahip "
-"deðilseniz\n"
-"\"Hayýr\" düðmesine týklayýn. Emin deðilseniz, \"Donaným bilgilerine bak\"\n"
-"seçerek ve \"Tamam\"a týkladýktan sonra makinanýzda saptanan donanýmýn\n"
-"listesine göz atabilir ve tekrar \"Tamam\" düðmesine týklayýp SCSI arayüzü\n"
-"sorusuna geri dönebilirsiniz\n"
-"\n"
-"Kartýnýzý elle tanýtmak zorundaysanýz sizden kartýnýza uygun seçenekleri\n"
-"belirlemenizi istenecektir. Bu karta özel seçeneklerle DrakX donanýmýnýzý\n"
-"algýlamaya ve baþlatmaya çalýþacaktýr. Bu, genellikle çalýþýr.\n"
-"\n"
-"Eðer çalýþmazsa, sürücü seçeneklerini öðrenmeniz gereklidir. Ýnternet\n"
-"baðlantýnýz bulunuyorsa, üreticinin web sitesindeki donaným belgelerinden\n"
-"ya da (eðer sisteminizde bulunuyorsa) Microsoft Windows'dan elde edebilir\n"
-"veya bu bilgileri bulabilme ipuçlarý için 'Kullanma Kýlavuzu'ndaki 3. "
-"bölümünü\n"
-"(\"Donanýmýnýzýn Bilgilerinin Toplanmasý\") okuyun."
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Yaboot'a siðer iþletim sistemleri, baþka çekirdekler ya da acil önyükleme\n"
-"görüntüsü için girdiler ekleyebilirsiniz.\n"
-"\n"
-"Diðer iþletim sistemleri için bir etiket ve kök disk bölümü gerekir.\n"
-"\n"
-"Linux için bir kaç seçenek mümkündür:\n"
-"\n"
-" * Label: önyükleme seçeneðini kullanýma sokmak için yaboot komut satýrýnda\n"
-"   girilecek bir isimdir.\n"
-"\n"
-" * Image: bu önyüklenecek çekirdeðin ismi olmalýdýr. Genellikle vmlinux ya "
-"da\n"
-"   bir uzantý ile vmlinux'ün alternatifi olan bir isimdir.\n"
-"\n"
-" * Root: Linux kurulumunuzun \"root\" aygýtý ya da \"/\" dýr.\n"
-"n  * Append: Apple donanýmýnda, çekirdek append seçeneði çoðunlukla ekran\n"
-"   donanýmýný ilkendirmek, klavye fare tuþunun 2. ya da 3. fare düðmesi\n"
-"   olarak kullanýlmasýný saðlamak için kullanýlýr. Aþaðýda bazý örnekler\n"
-"   verilmiþtir:\n"
-"\n"
-"video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 hda=autotune\n"
-"\n"
-"video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: bu seçenek önyükleme aygýtýnýn modüllerini ya da acil önyükleme\n"
-"   görüntüsü için bir ramdisk görüntüsü yüklemekte kullanýlabilir.\n"
-"\n"
-" * Initrd-size: öntanýmlý ramdisk uzunluðu genelde 4096 bayttýr. Daha büyük\n"
-"   bir ramdisk ayýrmak gerekiyorsa bu seçenek kullanýlabilir.\n"
-"\n"
-" * Read-write: normalde \"kök\" disk bölümü sistemin \"canlandýrýlmasý"
-"\"ndan\n"
-"   önce dosya sistemi denetiminin yapýlabilmesi için salt-okunur olarak\n"
-"   baðlanýr. Burada bu seçenekle bunu aþabilirsiniz.\n"
-"\n"
-" * NoVideo: Apple donanýmý olaðandýþý sorunlar çýkarabilmektedir. Bu "
-"seçenek\n"
-"   ile yerleþik çerçeve tamponu desteði kullanýlarak sistem önyüklenebilir.\n"
-"\n"
-" * Default: yaboot komut satýrýnda sadece ENTER tuþuna basarak öntanýmlý\n"
-"   olarak Linux'un önyüklenmesini saðlamak için bu seçeneðe Linux yazýlýr.\n"
-"   [Sekme] tuþuna basarak önyükleme seçeneklerini görmek istediðinizde\n"
-"   bu alana girilen etiket \"*\" ile belirlenmiþ olacaktýr."
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot NewWorld MacIntosh donanýmý için bir önyükleyicidir. Onunla\n"
-"GNU/Linux, MacOS, ya da MacOSX yüklenebilir. Normalde bu diðer iþletim\n"
-"sistemleri doðru saptanýr ve kurulur. Bu mümkün olmamýþsa, bu ekranda elle\n"
-"girdileri verebilirsiniz. Doðru parametreleri vermeye özen göstermelisiniz.\n"
-"\n"
-"Yaboot seçenekleri:\n"
-"\n"
-" * \"Açýlýþ iletisi\": önyükleyici komut satýrýndan önce gösterilecek basit\n"
-"   bir metindir.\n"
-"\n"
-" * \"Önyükleme Aygýtý\": GNU/Linux'un önyüklemesi için gereken bilgilerin\n"
-"   yerleþtirildiði aygýtý belirtir. Genellikle bu bilgiyi saklamak üzere\n"
-"   bir önyükleme disk bölümünü belirtilir.\n"
-"\n"
-" * \"Gömülü Sistem Gecikmesini Aç\": yaboot'da iki gecikme mümkündür. Bu "
-"ilk\n"
-"   gecikme saniyelerle ölçülür ve bu noktada CD, Gömülü Sistem, MacOS ya da\n"
-"   Linux açýlýþlarý arasýnda seçim yapýlabilir.\n"
-"\n"
-" * \"Çekirdek Önyükleme Zaman Aþýmý\": bu zaman aþýmý LILO önyükleme\n"
-"   gecikmesine benzer. Linux seçildikten sonra öntanýmlý çekirdek tanýmý\n"
-"   seçilmeden önce 0.1 saniyelik adýmlarla ölçülen bir gecikme saðlanýr.\n"
-"\n"
-" * \"CD'den Açýlýþ Etkileþtirilsin\": bu seçenek iþaretlenmiþse "
-"önyükleyicinin\n"
-"   ilk komut satýrýnda CD için \"C\" seçebilirsiniz.\n"
-"\n"
-" * \"Gömülü Sistem Açýlýþý Etkinleþtirilsin\": bu seçenek iþaretlenmiþse\n"
-"   önyükleyicinin ilk komut satýrýnda Gömülü Sistem Açýlýþý için \"N\"\n"
-"   seçebilirsiniz.\n"
-"   \"Öntanýmlý Ýþletim Sistemi\": Gömülü sistem gecikmesi zaman aþýmýna\n"
-"   uðradýðýnda öntanýmlý olarak yüklenecek iþletim sistemini burada\n"
-"   belirteceksiniz."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-"Burada makinanýza iliþkin donanýmýnýza baðlý olarak gösterilecek çeþitli\n"
-"parametreler sunulmuþtur:\n"
-"\n"
-" * \"Fare\": kullanmakta olduðunuz fare saptandýktan sonra bu düðmeyi\n"
-"   kullanarak farenizi deðiþtirebilirsiniz.\n"
-"\n"
-" * \"Klavye\": klavye eþlemi yapýlandýrmasý saptandýktan sonra bu düðmeyi\n"
-"   kullanarak klavyenizde ilgili deðiþikliði yapabilirsiniz.\n"
-"\n"
-" * \"Zaman Dilimi\": Öntanýmlý olarak seçtiðiniz dile baðlý zaman dilimi\n"
-"   seçilmektedir. Sizin için bu seçim doðru deðilse, bu düðmeyi kullanarak\n"
-"   zaman diliminizi deðitirebilirsiniz.\n"
-"\n"
-" * \"Yazýcý\": \"Yazýcý yok\" düðmesine týkladýðýnýzda yazýcý yapýlandýrma\n"
-"   sihirbazý açýlacaktýr.\n"
-"\n"
-" * \"TV Kartý\": Sisteminizde bir TV kartý algýlanmýþsa bunu göreceksiniz.\n"
-"   Ancak kurulum sýrasýnda deðiþiklik yapamayacaksýnýz.\n"
-"\n"
-" * \"ISDN Kartý\": Sisteminizde bir ISDN kartý algýlanmýþsa bunu "
-"göreceksiniz.\n"
-"   Düðmeye týklayarak ISDN kartýnýzla ilgili parametrelerde deðiþiklik\n"
-"   yapabilirsiniz."
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Lütfen yeni Mandrake Linux disk bölümünüzü kurmak için silmek istediðiniz\n"
-"sabit diski seçin. Üzerindeki tüm verilerin yok olacaðýný ve geriye dönüþün\n"
-"mümkün olmayacaðýný unutmayýn!"
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Bu sabit disk üzerindeki tüm verinin ve bölümlerin silinmesini istiyorsanýz\n"
-"\"Tamam\"'a týklayýn. Dikkatli olun, týkladýktan sonra Windows'da ki "
-"verileriniz\n"
-"de dahil her þeyi kaybedeceksiniz.\n"
-"\n"
-"Sabit diskinizdeki hiçbir veriyi ya da bölümü silmeden bu iþlemden "
-"vazgeçmek\n"
-"istiyorsanýz lütfen \"Ýptal\"'e týklayýn."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr "Çekirdek modüllerine eriþilemiyor (%s yok)"
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Bu sunucu/sunucularý seçmiþtiniz: %s\n"
-"\n"
-"\n"
-"Bu sunucular öntanýmlý olarak etkinleþtirilecektir. Bilinen bir güvenlik\n"
-"açýðý yoktur, ancak daðýtýmdan sonra bazý açýklar bulunmuþ olabilir.\n"
-"Bu durumda bu sunucularý mükün olan en kýsa sürede güncellemelisiniz.\n"
-"\n"
-"\n"
-"Bu sunucularý gerçekten kurmak istiyor musunuz?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "NIS alaný olmadan yayýn kullanamazsýnýz"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "%s sürücüsüne FAT(MsDos) biçemli bir disket yerleþtiriniz"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Bu disket FAT(MsDos) biçemli deðil"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Bu kayýtlý paket seçimini kullanacaksanýz, kurulumu ``linux defcfg=floppy'' "
-"ile baþlatmalýsýnýz."
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "%s dosyasý okunurken hata oluþtu"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "Tamam"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Bilgisayarýnýzdaki bazý donanýmlar çalýþmak için \"özgün\" sürücüler\n"
-"gerektiriyor. Bunlar hakkýnda bazý bilgiler bulabileceðiniz yer: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Bir kök disk bölümüne ihtiyacýnýz var.\n"
-"Bunun için mevcut bir disk bölümünü seçebileceðiniz gibi\n"
-"yeni birini de oluþturabilirsiniz.\n"
-"Bundan sonra da \"Baðlama Noktasý\"ný '/' olarak deðiþtirmelisiniz."
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Bir takas disk bölümüne ihtiyacýnýz var"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Bir takas disk bölümünüz yok\n"
-"\n"
-"Takas alaný çok önemlidir ve bilhassa 2.4 çekirdekler için belleðin\n"
-"iki katýna kadar bir takas alaný önerilir!\n"
-"\n"
-"Devam edilsin mi?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "/boot/efi ye baðlanmýþ bir FAT bölümüne ihtiyacýnýz var"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Boþ alan kullanýlsýn"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Yeni bölümler açmak için yeterli yer yok"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Mevcut bölümler kullanýlsýn"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Kullanýlabilecek bir bölüm bulunamadý"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Loopback için Windows bölümünü kullanýlsýn"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Linux4Win için hangi disk bölümünü kullanmak istiyorsunuz?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Boyutlarý seçiniz"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Kök bölümü boyutu (Mb): "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Takas bölümü boyutu (Mb): "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Windows bölümündeki boþ alan kullanýlsýn"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Hangi bölümü yeniden boyutlandýrmak istiyorsunuz?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Windows dosya sistemi sýnýrlarý hesaplanýyor"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT yeniden boyutlandýrýcýsý bölümü boyutlandýramýyor,\n"
-"þu hata oluþtu: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Windows bölümünüz çok daðýnýk, lütfen önce \"defrag\" ile diskinizdeki "
-"dosyalarý biraraya getirin"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"UYARI!\\ \n"
-"DrakX Windows disk bölümünüzü yeniden boyutlandýracaktýr. Bu iþlem\n"
-"tehlikeli olabilir. Daha önce yapmamýþsanýz kurulumdan çýkýn ve Windows\n"
-"altýnda Scandisk (ve seçimli olarak defrag) programýný çalýþtýrýn. Ardýndan\n"
-"kuruluma tekrar devam edin. Verilerinizin yedeðini almayý da unutmayýn!\n"
-"Emin olduðunuzda Tamam'a basýn."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Windows için ne kadar yer býrakmak istiyorsunuz?"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "%s bölümünde"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT yeniden boyutlandýrmasý baþarýsýz: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Yeniden boyutlandýrýlacak ya da loopback olarak kullanýlacak \n"
-"hiç FAT bölümü yok (ya da boþ alan kalmamýþ)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Tüm disk silinsin"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "MS Windows silinsin"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Birden çok sabit diskiniz var, hangisine linux kurmak istiyorsunuz?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "%s diski üzerindeki TÜM bölümler ve veriler silinecektir"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Özel Disk Bölümlendirme"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Fdisk kullanýlsýn"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Þimdi %s'i bölümlendirebilirsiniz.\n"
-"Ýþiniz bittiðinde `w'yi kullanarak deðiþiklikleri kaydetmeyi unutmayýn."
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Windows bölümünüzde yeterli boþ yeriniz yok"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Kurulum için boþ yer bulunamýyor"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX Bölümlendirme sihirbazý þu çözümleri buldu:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Bölümlendirme baþarýsýz: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Að baðlanýyor"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Að ayrýlýyor"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Bir hata oluþtu, ancak sebebi saptanamadý.\n"
-"Devam edebilirsiniz, ama risk size ait!"
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "%s baðlama noktasýný çoðalt"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Bazý paketlerin kurulumu doðru olarak tamamlanmadý.\n"
-"CDROM sürücünüz sorunlu ya da CD'niz bozuk olabilir.\n"
-"Linux kurulu baþka bir makinada \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-"komutuyla CD'nizi kontrol edebilirsiniz.\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "%s'a Hoþ Geldiniz"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Disket sürücünüz yok"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "`%s' adýmýna baþlanýyor\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Kurmak istediðiniz boyutu seçiniz"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Toplam boyut: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Sürüm: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Boyut: %d kB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Kurmak istediðiniz paketleri seçin"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Bilgi"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Kurulum"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Kuruluyor"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Lütfen bekleyin, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Kalan süre "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Toplam süre "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Kurulum hazýrlanýyor"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "%s paketi kuruluyor"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Yine de devam edilsin mi?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Paketler düzenlenirken bir hata oluþtu:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "X11 için mevcut ayarlar kullanýlsýn mý?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Sistem kaynaklarýnýz kýsýtlý. Mandrake Linux'yi kurarken sorunlarýnýz\n"
-"olabilir. Bu durum oluþursa, metin tabanlý kurulumu deneyebilirsiniz.\n"
-"Bunun için CDROM'dan açtýktan sonra `F1'e basýn, ve komut satýrýna\n"
-"`text' yazýn."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Kurulum Sýnýfý"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Lütfen aþaðýdaki kurulum sýnýflarýndan birisini seçiniz:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Seçtiðiniz paket gruplarýnýn toplam boyu yaklaþýk %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Bu boyuttan daha azýný yüklemek isterseniz,\n"
-"kurmak istediðiniz paket yüzdesini seçin.\n"
-"\n"
-"Düþük bir yüzde belirtirseniz sadece çok önemli paketler kurulacaktýr.%%100 "
-"belirtirseniz seçtiðiniz bütün paketler kurulacaktýr."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Sabit diskinizde bu paketlerin sadece %%%d'sini kuracak kadar yer var.\n"
-"Bundan daha azýný kurmak isterseniz,\n"
-"%%%d ile kurulabilecek tüm paketler,\n"
-"daha düþük bir yüzde ile ise sadece çok önemli paketler kurulacaktýr."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Sonra ki adýmda daha ayrýntýlý bir seçim karþýnýza gelecektir."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Kurulacak paketlerin yüzdesi"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Paket Grubu Seçimi"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Tek tek paket seçimi"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Toplam boyut: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Hatalý paket"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ýsim: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Önem seviyesi: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Yeterli yeriniz kalmadýðýndan bu paketi seçemezsiniz"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Aþaðýdaki paketler kurulacaktýr"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Aþaðýdaki paketler sistemden silinecekler"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Bu paket seçimlik deðildir"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Bu zorunlu bir pakettir, sistemden kaldýrýlamaz"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Bu paketi seçimlerinizden çýkaramazsýnýz. Zaten kurulmuþ."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Bu paket güncellenmek zorunda\n"
-"Seçimlerinizden çýkarmak istediðinizden emin misiniz?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Bu paketi seçimlerinizden çýkaramazsýnýz. Güncellenmek zorunda"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Kendiliðinden seçilen paketleri göster"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Disketten yükle/Diskete kaydet"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "Paket seçimini güncellemesi"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "En küçük Kurulum"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Tahminen"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Lütfen bekleyin, Kurulum hazýrlanýyor"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d paket"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Uyarý\n"
-"\n"
-"Aþaðýdaki maddeleri lütfen dikkatle okuyun. Herhangi birine\n"
-"katýlmýyorsanýz, bir sonraki CD ortamýndan kurulum yapmanýz mümkün\n"
-"deðildir. Bu ortamdan kurulum yapmadan devam edebilmek için 'Reddet'e\n"
-"basýnýz.\n"
-"\n"
-"\n"
-"Bir sonraki CD'deki bazý uygulamalar GPL Lisansý'na ya da benzer "
-"anlaþmalara\n"
-"tabi deðildir. Her parça kendine ait bir lisansýn þartlarý ve durumlarý\n"
-"tarafýndan yönlendirilir. Lütfen ilgili lisansý dikkatle okuyup kabul "
-"etmeden\n"
-"bu parçalarýn daðýtýmýný yapmayýnýz.\n"
-"Genel olarak bu tür lisanslar ilgili uygulamanýn transferi, kopyalanmasý "
-"(yedekleme\n"
-"amacý dýþýnda nedenlerle), daðýtýmý, kodlarýnýn incelenmesi ve "
-"deðiþtirilmesini\n"
-"engeller. Herhangi bir anlaþmazlýk, ilgili lisans tarafýndan verilen "
-"haklarýnýzý yok\n"
-"eder. Özel bir lisans anlaþmasýyla hak sahibi olmadýysanýz, ilgili parçalarý "
-"birden\n"
-"fazla sisteme kuramaz, að ortamýnda çalýþmaya adapte edemezsiniz. Herhangi "
-"bir\n"
-"þüphe durumunda doðrudan daðýtýcý, ya da uygulamanýn yazarýyla iletiþim "
-"kurunuz.\n"
-"Üçüncü þahýslara transfer ya da dokümanlar da dahil herhangi bir "
-"kopyalanmasý\n"
-"genel olarak mümkün deðildir.\n"
-"\n"
-"\n"
-"Bir sonraki CD ortamýndaki parçalarýn tüm haklarý her bir uygulamanýn kendi "
-"yazarýna\n"
-"aittir, ve entellektüel özgünlük yasalarý tarafýndan korunmaktadýr.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Kabul et"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Reddet"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Cd-Rom'u deðiþtirin!\n"
-"\n"
-"\"%s\" etiketli Cd-Rom'u sürücünüze takýn ve TAMAM'a basýn.\n"
-"Eðer Cd-Rom elinizde yoksa bu Cd-Rom'dan kurmamak için VAZGEÇ'e basýn."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Paketler kurulurken bir hata oluþtu:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Bir hata oluþtu"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Lisans anlaþmasý"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Giriþ\n"
-"\n"
-"Ýþletim sistemi, ve Mandrake Linux daðýtýmýnda bulunan farklý parçalar "
-"buradan\n"
-"itibaren \"Yazýlým Ürünleri\" olarak adlandýrýlacaktýr. Yazýlým ürünleri; "
-"iþletim\n"
-"sistemiyle ilgili program kümeleri, yötemleri, kurallarý ve dokümanlarý, "
-"Linux-\n"
-"Mandrake'nin farklý parçalarýný içermektedir, fakat bunlarla "
-"sýnýrlandýrýlmamaktadýr.\n"
-"\n"
-"\n"
-"1. Lisans Anlaþmasý\n"
-"\n"
-"Lütfen bu dokümaný dikkatle okuyun. Bu doküman yazýlým ürünlerini uygulayan\n"
-"MandrakeSoft S.A. ile sizin aranýzdaki lisans anlaþmasýdýr. Yazýlým "
-"ürünlerini,\n"
-"kurulum yaparak, çoðaltarak, ya da herhangi bir amaçla kullanarak bu "
-"Lisans'ýn\n"
-"þartlarýna uyacaðýnýzý açýk ve tam olarak kabul etmiþ bulunuyorsunuz. Eðer "
-"bu\n"
-"Lisans'ýn þartlarýný kabul etmiyorsanýz, yazýlým ürünlerini kurma, çoðaltma "
-"ve\n"
-"kullanma hakkýnýz yoktur. Yazýlým ürünlerini lisansýn þartlarýna uymayacak\n"
-"herhangi bir þekilde kurma, çoðaltma ya da kullanma teþebbüsü, bu lisans "
-"altýndaki\n"
-"haklarýnýzý yok edecektir. Lisansýn anlaþmasýnýn bozulmasý durumunda, "
-"yazýlým\n"
-"ürünlerinin tüm kopyalarýný derhal yok etmeniz gerekmektedir.\n"
-"\n"
-"\n"
-"2. Sýnýrlý Garanti\n"
-"\n"
-"Yazýlým Ürünleri ve yanlarýnda gelen dokümanlar \"olduklarý gibi\"dirler, ve "
-"kanunlarýn izin verdiði\n"
-"açýlýmda garantisizdirler. MandrakeSoft S.A.,  kullanýcýnýn yazýlým "
-"ürünlerini kullanmak konusunda yetkin\n"
-"olmamasý nedeniyle oluþan (iþ kaybý, iþin aksamasý, maddi kayýp, hukuki "
-"cezalara çarptýrýlma\n"
-"vb. neden olacak) doðrudan ya da dolaylý (MandrakeSoft S.A. bu tür "
-"zararlarýn oluþabileceðini duyursa bile)\n"
-"hiçbir zarar nedeniyle sorumluluk taþýmaz.\n"
-"\n"
-"BAZI ÜLKELERDE YASAKLANMIÞ YAZILIMA SAHÝP OLMAYA YA DA ONU KULLANMAYA BAÐLI "
-"SINIRLI SORUMLULUK\n"
-"\n"
-"Kanunlarýn verdiði yetkilere göre, MandrakeSoft S.A. ya da daðýtýmcýlarý "
-"kullanýcýnýn, bulunduðu ülkede yasak olduðu halde, yazýlým "
-"ürünlerinikullanmasý, onlara sahip olmasý, onlarý Mandrake Linux "
-"sitelerinden indirmesi\n"
-"nedeniyle oluþan (iþ kaybý, iþin aksamasý, maddi kayýp, hukuki cezalara "
-"çarptýrýlma\n"
-"vb. neden olacak) doðrudan ya da dolaylý (MandrakeSoft S.A. bu tür "
-"zararlarýn oluþabileceðini duyursa bile)\n"
-"hiçbir zarar nedeniyle sorumluluk taþýmaz. Bu sýnýrlý sorumluluk, yazýlým "
-"ürünleri içindeki güçlü kriptografi araçlarýný kapsar, fakat\n"
-"bunlarla sýnýrlý deðildir.\n"
-"\n"
-"\n"
-"3. GPL Lisansý ve Ýlgili Lisanslar\n"
-"\n"
-"Yazýlým ürünleri farklý birçok kiþi tarafýndan oluþturulmuþ parçalardan "
-"oluþmaktadýr. Bu parçalarýn\n"
-"çoðu GNU Genel Kamu Lisansý (GPL) ya da benzer lisanslara tabidirler. Bu "
-"lisanslarýn çoðu, parçalarýn\n"
-"kullanýmýna, çoðaltýlmasýna, deðiþtirilmesine ya da tekrar daðýtýmýnýn "
-"yapýlmasýna izin vermektedir.\n"
-"Lütfen kullanýmdan önce her bir yazýlým ürünü için, onu ilgilendiren lisans"
-"(lar)ýn tüm þartlarýný\n"
-"okuyunuz. Bir yazýlým ürünü hakkýndaki herhangi bir soru, MandrakeSoft'a "
-"deðil, o ürünün geliþtiricisine\n"
-"yöneltilmelidir. MandrakeSoft tarafýndan geliþtirilmiþ yazýlýmlar GPL "
-"lisansýyla korunmaktadýr. MandrakeSoft\n"
-"tarafýndan hazýrlanan dokümanlar da özel bir lisansa tabidir. Daha fazla "
-"bilgi için lütfen dokümanlara\n"
-"göz atýnýz.\n"
-"\n"
-"\n"
-"4. Entellektüel Özellik Haklarý\n"
-"\n"
-"Yazýlým ürünleri üzerindeki tüm haklar bu yazýlýmýn geliþtiricisine aittir; "
-"yazýlýma uygulanan entellektüel özellik ve kopyalama\n"
-"kanunlarýyla korunmaktadýrlar. MandrakeSoft, yazýlým ürünlerinin, bütün "
-"olarak ya da parça parça, herhangi bir amaç için\n"
-"deðiþtirilme ya da adapte edilme haklarýný saklamaktadýr. \"Mandrake\", ve "
-"\"Mandrake Linux\" ve ilgili logolar MandrakeSoft S.A.'ya\n"
-"ait tescilli markalardýr.\n"
-"\n"
-"\n"
-"5. Yönetim Kanunlarý\n"
-"\n"
-"Bu lisansýn herhangi bir kýsmý, bir mahkeme tarafýndan kanunsuz ya da "
-"uygunsuz bulunursa, o kýsým bu kontrata dahil edilmemiþ olacaktýr.\n"
-"Diðer kýsýmlarýn sýnýrlamalarý devam edecektir. Bu lisansýn þartlarý Fransa "
-"Kanunlarý altýndadýr. Bu lisansýn þartlarýna her türlü itiraz\n"
-"Paris Mahkemesi tarafýndan görüþülecektir. Bu doküman hakkýnda herhangi bir "
-"soru için lütfen MandrakeSoft S.A'ya baþvurun.\n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klavye"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Klavye düzenini seçiniz."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Bu eriþile bilen tüm klavyelerin listesidir"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Hangi kurulum sýnýfýný istiyorsunuz?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Kurulum/Güncelleme"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Bu bir kurulum mu, yoksa bir güncelleme mi?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Önerilen"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Uzman"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Güncelleme"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Lütfen farenizin türünü seçin."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Fare Kapýsý"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Farenizin baðlý olduðu seri portu seçiniz."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Tuþlar Emülasyonu"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "2. Tuþ emülasyonu"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "3. Tuþ emülasyonu"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA kartlar yapýlandýrýlýyor..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "IDE yapýlandýrýlýyor"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "hiç bölüm bulunamadý"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Baðlama noktalarýný bulmak için bölümler taranýyor"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Baðlama noktalarýný seçin"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Bölümlendirme tablonuzu okuyamýyorum, sanýrým biraz bozulmuþ :-(\n"
-"Bozulmuþ bölümleri düzeltmeye çalýþabilirim (TÜM VERÝLERÝNÝZ yok olacak!)\n"
-"Diðer bir çözüm de DrakX'in bölümlendirme tablosunu deðiþtirmesine izin\n"
-"vermemektir. (hata: %s)\n"
-"\n"
-"Tüm bölümleri kaybetmeye razý mýsýnýz?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake bölümlendirme tablosunu okumakta baþarýsýz oldu.\n"
-"Kendiniz devam edebilirsiniz."
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-" 1 Mb lýk önyükleme bölümünü oluþturulacak disk baþýnda alan yok! Kurulum "
-"devam edecektir fakat her seferinde açýlýþ disketi gerekecektir \n"
-"Oluþturmak için DiskDrake i kullanýnýz!!!!(Çok önemli)"
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "Güncelleme yapýlacak hiç bir kök disk bölümü bulunamadý"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Kök (root) Bölümü"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Sisteminizin kök (/) bölümü hangisidir?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Bölümlendirme tablosundaki deðiþikliklerin geçerli olmasý için makinanýzý "
-"yeniden baþlatmalýsýnýz."
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Biçemlendirilecek disk bölümlerini seçin"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Hatalý bloklar sýnansýn mý?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Bölümler biçemlendiriliyor"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s dosyasý oluþturuluyor ve biçimlendiriliyor"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Kurulumu tamamlamak için yeterli takas alaný yok, lütfen ekleme yapýn"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Mevcut paketler taranýyor."
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Güncellenecek paketler bulunuyor"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Sisteminizde kurulum ya da güncelleme için yeterli boþ yer yok (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Tamamlanan (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Önerilen (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Özel"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Lütfen disketteki paket seçimini yükleye veya kaydete týklayýnýz.\n"
-"Bu Otomatik kurulumdakinin ayný biçiminde oluþturulacaktýr."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Disketten yükle"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Disketten yüklüyor"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Paket Seçimi"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "Paket seçimini ihtiva eden diski sürücüye yerleþtirin"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Diskete kaydet"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Seçilen boyut eriþilebilir disk alanýndan daha büyük"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Aþaðýdaki listedeki tüm CD'lere sahipseniz TAMAM'a basýn.\n"
-"CD'lerin hiçbirine sahip deðiseniz VAZGEÇ'e v,basýn.\n"
-"CD'lerden birkaçý eksikse onlarý seçili durumdan çýkarýp TAMAM'a basýn."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "\"%s\" etiketli Cd-Rom"
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"%s paketi kuruluyor\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Kurulum sonrasý ayarlar"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "%s sürücüsüne bir açýlýþ disket takýn"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "%s sürücüsüne güncelleme modüllerinden oluþan bir disket takýn"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Þimdi þifreleme için kullanýlacak yazýlýmý indirebilirsiniz.\n"
-"UYARI:\n"
-"\n"
-"Bu yazýlýma uygulanabilir farklý genel gereksinimler nedeniyle ve çeþitli\n"
-"yargý haklarýndan dolayý, bu yazýlýmýn son kullanýcýsý, kanunlarýn ona bu\n"
-"yazýlýmý internetten indirme ve saklama hakkýný verdiðinden emin olmalýdýr.\n"
-"\n"
-"Buna ek olarak, müþteri ve/veya son kullanýcý özellikle, bulunduðu yargý "
-"bölgesinin\n"
-"yasalarýný çiðnemediðinden emin olmalýdýr. Müþteri ve/veya son kullanýcý \n"
-"kanunlarýn uyguladýðý yasal koþullara saygý göstermediðinde ciddi "
-"yaptýrýmlara\n"
-"maruz kalacaktýr.\n"
-"\n"
-"Özel ya da dolaylý zararlara (kar azalmasý, iþin sekteye uðramasý, ticari "
-"bilgi\n"
-"kaybý ve diðer maddi kayýplar) yol açan hiçbir olayda ne Mandrakesoft, ne "
-"de \n"
-"üreticileri ve/veya kaynak saðlayanlarý sorumlu tutulamaz. Bu yazýlýmý\n"
-"internetten indirirken son kullanýcý iþbu sözleþmeyi kabul ettiðini \n"
-"beyan etmiþ sayýlýr.\n"
-"\n"
-"\n"
-"Bu sözleþmeyle ilgili her türlü soru için lütfen\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USAadresine yazýnýz."
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Paketleri almak için bir yansý adresi seçin"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Yansý adresine baðlantý kuruluyor"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Lütfen kurmak istediðiniz paketleri seçin."
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Bulunduðunuz zaman dilimi hangisi?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "Donaným saatinizi GMT'ye göre ayarlayýn"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Otomatik eþgüdümlü zaman (NTP kullanýyor)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "NTP sunucu"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Uzaktaki CUPS sunucusu"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Yazýcý yok"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Özet"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Fare"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Zaman Dilimi"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Yazýcý"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDN kartý"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Ses Kartý"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV kartý"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Yerel Dosyalar"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Root parolasýný düzenle"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Parola yok"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Bu parola çok basit (en az %d karakter boyunda olmalýdý)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Kimlik tanýma"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "LDAP Kimlik tanýma"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP Temel dn"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "LDAP Sunucu "
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "NIS Kimlik Tanýma"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS alaný"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS sunucu "
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Özel bir açýlýþ disketi, Linux sisteminizin normal bir sistem yükleyiciye "
-"gerek\n"
-"kalmadan açýlmasýný saðlar. Eðer sisteminize SILO kurmayacaksanýz,\n"
-"ya da baþka bir iþletim sistemi SILO'yu silerse ya da SILO donanýmýnýzla "
-"çalýþmazsa\n"
-"bu disket size yardýmcý olacaktýr. Sonradan Mandrake kurtarma disketi "
-"görüntüsünü\n"
-"kullanarak da bu disket oluþturulabilir.\n"
-"Açýlýþ disketi oluþturmak istiyorsanýz, lütfen sürücüye boþ bir disket "
-"yerleþtirip \"Tamam\"'a basýn.?"
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Ýlk disket sürücü"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Ýkinci disket sürücü"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Atla"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Özel bir açýlýþ disketi, Linux sisteminizin normal bir sistem yükleyiciye "
-"gerek\n"
-"kalmadan açýlmasýný saðlar. Eðer sisteminize lilo (ya da grub) "
-"kurmayacaksanýz,\n"
-"ya da baþka bir iþletim sistemi lilo'yu silerse ya da lilo donanýmýnýzla "
-"çalýþmazsa\n"
-"bu disket size yardýmcý olacaktýr. Sonradan Mandrake kurtarma disketi "
-"görüntüsünü\n"
-"kullanarak da bu disket oluþturulabilir.\n"
-"Açýlýþ disketi oluþturmak istiyor musunuz?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Disket sürücü yok"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Açýlýþ disketi yapmak için kullanýlacak disket sürücüyü seçin"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "%s sürücüsüne bir disket takýn"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Açýlýþ disketi oluþturuluyor"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Açýlýþ yükleyici hazýrlanýyor"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Eski ya da bilinmeyen bir makinaya sahipmiþsiniz gibi görünüyor.\n"
-"Yaboot önyükleyicisi düzgün çalýþmayabilir.\n"
-"Kurulum devam edecek ama bu makinayý açmak için\n"
-"BootX kullanmak zorunda kalacaksýnýz."
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "aboot'u kullanmak istiyor musunuz?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"aboot kurulumunda hata, \n"
-"ilk disk bölümünü yok etse bile yine de kurulmasýný istiyor musunuz?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-msgid "Installing bootloader"
-msgstr "Sistem yükleyiciyi Kuruluyor"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Açýlýþ yükleyicisi kurulumu baþarýsýz. Oluþan hata:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Önyükleyiciyi etkinleþtirmek için Gömülü Sistem önyükleme aygýtýnýzý\n"
-"deðiþtirme gereði duyabilirsiniz. Yeniden baþlatma sýrasýnda önyükleyici\n"
-"komut satýrýný göremiyorsanýz, sistemi yeniden baþlatýrken Command-Option-O-"
-"F\n"
-"seçtikten sonra:\n"
-"  setenv boot-device %s,\\\\:tbxi\n"
-"ve ardýndan:   shut-down\n"
-"girerseniz, sonraki açýlýþta önyükleyici komut satýrýný görmeniz gerekir."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Düþük"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Orta"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Yüksek"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Güvenlik seviyesini seçin"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "%s sürücüsüne boþ bir disket yerleþtirin"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Otomatik kurulum disketi hazýrlanýyor"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Bazý bölümler tamamlanmadý.\n"
-"\n"
-"Gerçekten çýkmak istiyormusunuz?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Tebrikler, kurulum tamamlandý.\n"
-"Cdrom ve disketi çýkarttýktan sonra Enter'a basarak bilgisayarýnýzý \n"
-"yeniden baþlatýn.\n"
-"\n"
-"Mandrake Linux'nin bu sürümündeki yamalar hakkýnda \n"
-"bilgi almak için http://www.mandrakelinux.com adresinden Errata'ya bakýnýz.\n"
-"\n"
-"Sisteminizin ayarlarý hakkýnda daha geniþ bilgiyi Mandrake Linux\n"
-"Kullanýcý Kitapçýðý'nda bulabilirsiniz."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Otomatik kurulum disketi oluþtur"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Tam otomatik bir kurulum yapýlabilir, ancak\n"
-"bu durumda sabit diskiniz tamamen ele geçirilebilir!!\n"
-"(Yani kurulum programý bütün diski kullanmaya kalkabilir).\n"
-"\n"
-"Etkileþimli bir kurulumu da tercih edebilirsiniz.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Otomatik"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Tekrarla"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Paket seçimini Kaydet"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Kurulum %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> ileri/geri  |  <Boþluk> iþaretle  |  <F12> sonraki ekran"
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu vazgeç"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "Bir dosya seçin"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Geliþmiþ"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Lütfen bekleyin"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Aðacý Aç"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Aðacý Kapat"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Birbirine baðla ve sýralý grupla"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Karýþýklýk (%s), daha açýk yazýn\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Hatalý tercih, tekrar deneyin\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (%s öntanýmlý) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Seçiminiz? (%s öntanýmlý) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Seçiminiz (öntanýmlý %s, yoksa `none' yazýn) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Çek dili (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Almanca"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak dili"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Ýspanyolca"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Fince"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Fransýzca"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norveççe"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Polonya dili"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Rusça"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Ýsveççe"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Ýngiliz (UK) klavye"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "Amerikan (US) klavye"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Arnavutça"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Ermenice (eski) "
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Ermenice (daktilo)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Ermenice (fonetik)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerice (latin)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belçika dili"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulgarca"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brezilya dili"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Belarusça"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Ýsveççe (Alman düzeni)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Ýsveççe (Fransýz düzeni)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Çek dili (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Almanca (ölü tuþlar yok"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Danimarka dili"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak dili (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norveççe)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estonya dili"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gürcü dili (Rus düzeni)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gürcü dili (Latin düzen)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Yunanca"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Macarca"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Croatian"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Ýbranice"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Ýbranice (Fonetik)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Farsça"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Ýzlanda dili"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Ýtalyanca"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Japonca 106 tuþ"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Kore klavye"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latin Amerika dili"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litvanya dili AZERTY (eski)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litvanya dili AZERTY"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litvanya dili QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanya dili \"Fonetik\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-msgid "Latvian"
-msgstr "Latvian"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Makedonya dili"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Hollanda dili"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Lehçe (QWERTY düzeni)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Lehçe (QWERTZ düzeni)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portekizce"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Fransýzca (Kanada/Quebec)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Romence (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Romence (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Rusça (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Slovence"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakça (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakça (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "Seriban (kril alfabesi)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Thai klavye"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr "Tajik klavye"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Türkçe (geleneksel \"F\" klavye)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Türkçe (modern \"Q\" klavye)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukrayna dili"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "Amerikan (US) klavye (uluslararasý)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamca \"numerik satýr\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavca (latin)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Döngüsel baðlama %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Ýlk Mantýksal ses miktarýný kaldýrýr\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Fare"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standart"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Sýradan Tekerli PS2 Fare"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 tuþlu"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Genel"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Tekerli"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "seri"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Sýradan 2 Tuþlu Fare"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Sýradan 3 Tuþlu Fare"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mouse (seri ya da eski C7 tipi)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "bus fare"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 tuþlu"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 tuþlu"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "hiçbiri"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Fare yok"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Lütfen farenizi deneyin"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Fareyi aktif hale getirmek için"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "FARENÝZÝN TEKERÝNÝ HAREKET ETTÝRÝN!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-9,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Son"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Sonra ki ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Önce ki"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Kabul ediyor musunuz?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Ýnternete baðlan"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Adsl ile baðlanmanýn en sýk baþvurulan yolu pppoe'dir.\n"
-"Fakat Bazý baðlantýlar pptp'yi , diðer bir kaçý ise dhcp'yi kullanýr.\n"
-"Emin deðilseniz lütfen \"pppoe'yi kullan\"'ý seçin"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "dhcp'yi kullan"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pppoe'yi kullan"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pptp'yi kullan"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Hangi dhcp iþlemcisini kullanmak istiyorsunuz?Öntanýmlý olan dhcpcd'dir"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Sisteminize baðlý bir ethernet kartý bulunamadý. Bu baðlantý\n"
-"türünü ayarlayamayacaðým."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Að baðdaþtýrýcýsýný seçin"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Lütfen internete baðlanmak için kullanacaðýnýz að baðdaþtýrýcýsýný seçin"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "að kartý bulunamadý"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Að Ayarlarý"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Eðer biliyorsanýz lütfen makinanýzýn ismini girin.\n"
-"Bazý DHCP sunucularý çalýþabilmek için sunucu ismi gerektirirler.\n"
-"Sunucu isminiz, sunucu adý kurallarýna tam olarak uygun olmalýdýr,\n"
-"Örneðin ``bilgisayarým.alanadý.com'' gibi."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Sunucu ismi"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Að Yapýlandýrma Sihirbazý"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Dýþsal ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Ýçsel ISDN kartý"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "ISDN baðlantýnýz hangi türde?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Hangi ISDN yapýlandýrmasýný tercih edersiniz?\n"
-"\n"
-" * \"Eski\" yapýlandýrma isdn4net kullanýr. Güçlü araçlar\n"
-"   içermesine raðmen yapýlandýrma zor olabilir ve standart deðildir.\n"
-"\n"
-" * \"Yeni\" yapýlandýrmanýn anlaþýlmasý daha kolay, daha standart\n"
-"   ancak daha az araç içerir.\n"
-"\n"
-"Size hangisi kolay geliyorsa o yapýlandýrmayý seçmeniz önerilir.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Yeni yapýlandýrma (isdn-hafif)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Eski yapýlandýrma (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN Yapýlandýrmasý"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Servis saðlayýcýnýzý seçin.\n"
-" Eðer listede yoksa, Listelenmemiþ'i seçin."
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "Avrupa Protokolü"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "Avrupa protokolü (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "Dünyanýn diðer kýsýmlarý için protokol"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Dünyanýn diðer kýsýmlarý için protokol \n"
-" D-Kanalý yok (kiralýk hat)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Hangi protokolü kullanmak istiyorsunuz ?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Ne tür bir kartýnýz var?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Bilmiyorum"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Bir ISA karta sahipseniz bir sonraki ekrandaki deðerler doðru olacaktýr.\n"
-"\n"
-"Bir PCMCIA karta sahipseniz, kartýnýzýn irq ve io deðerlerini bilmek "
-"sorundasýnýz.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Vazgeç"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Devam"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Hangisi sizin ISDN kartýnýz?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Bir PCI ISDN kartý buldum, fakat türünü bilmiyorum. Lütfen bir sonraki "
-"ekrandan bir PCI kart seçin."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "PCI ISDN kart bulunamadý. Lütfen bir sonraki ekrandan bir tane seçin."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Modeminizin hangi seri porta baðlý olduðunu seçiniz"
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Çevirmeli að seçenekleri"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Baðlantý adý"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Telefon numarasý"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Giriþ ID'si"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Betik tabanlý"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Terminal tabanlý"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Alan adý"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Ýlk DNS Sunucu (isteðe baðlý)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Ýkinci DNS Sunucu(isteðe baðlý)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Baðlantýyý kesebilir ya da yeniden ayarlayabilirsiniz."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Baðlantýnýzý yeniden ayarlayabilirsiniz."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Þu anda internete baðlýsýnýz."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Ýnternete baðlanabilir ya da baðlantýnýzý yeniden ayarlayabilirsiniz."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Þu anda internete baðlý deðilsiniz."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Ýnternete Baðlan"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Ýnternetten Çýk"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Að baðlantýsýný yapýlandýr (Yerel að ya da Ýnternet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Ýnternet baðlantýsý & ayarlarý"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "%s baðlantýsýný yapýlandýracaðým."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Þimdi %s baðlantýsýný yapýlandýracaðým. \n"
-"\n"
-"\n"
-"Devam etmek için Tamam 'a týklayýnýz."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Að Yapýlandýrmasý"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Çünkü Siz þu anda Að kurma bölündesiniz, fakat sizin zaten yapýlandýrýlmýþ "
-"bir aðýnýz var.\n"
-"Eski yapýlandýrmanýzýn devamý için \"TAMAM\" a týklayýn.Veya yeniden "
-"Ýnternet & Network baðlantýlarýnýzý yapýlanýdmak için \"ÝPTAL\" e basýn.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Að Yapýlandýrma Sihirbazýna Hoþgeldiniz!!!\n"
-"\n"
-"Bu sihirbaz aðýnýzýn ayarlanmasýnda size yardýmcý olmak içindir.\n"
-"Eðer otomatik tanýmlama istemiyorsanýz , kutucuðun tikini kaldýrýnýz.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Yapýlandýrmak için bir profil seçin"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Otomatik algýlamayý kullan"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Aygýtlar taranýyor..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Normal bir modem baðlantýsý"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "%s kapýsý taranýyor"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN baðlantýsý"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "%s algýlandý"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ADSL Baðlantýsý"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "%s arayüzünde algýlandý"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Kablo Baðlantýsý"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "Kablo Baðlantýsý analizi"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "LAN Baðlantýsý"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "Ethernet Cart(lar)ý algýlandý"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Yapýlandýrmak istediðiniz baðlantýyý seçin"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Bu yapýlandýrma ile Internet'e bir çok yoldan baðlanmanýz mümkün.\n"
-"Kullanmak istediðiniz birini seçiniz.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Ýnternet Baðlantýsý"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Baðlantýnýzýn açýlýþta baþlatýlmasýný ister misiniz?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Að Yapýlandýrmasý"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr "Að yeniden baþlatmayý gerektiriyor."
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Aðýnýzý yeniden baþlatýrken bir hata oluþtu : \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Tebrikler, að ve internet yapýlandýrmasýný tamamladýnýz.\n"
-"\n"
-"Þimdi bu yapýlandýrma sisteminize uygulanacak.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Bittikten sonra, makina ismi deðiþtirme sorunlarýndan kaçýnmak için\n"
-"X ortamýndan baþlatmanýz önerilir."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"UYARI: Bu aygýt daha önce internet baðlantýsý için yapýlandýrýlmýþ.\n"
-"Basitçe 'Ayarlarý tut'u seçin ve eski ayarlarýnýzla devam edin.\n"
-"Bu yapýlanmayý deðiþtirmemek istiyorsanýz devam edin."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr "Lütfen bu makina için gerekli IP deðerlerini girin."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "%s að aygýtý ayarlanýyor"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (%s sürücüsü)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP adresi:"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Að maskesi:"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Otomatik IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresi 1.2.3.4 biçimide olmalýdýr"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Lütfen makinanýzýn ismini girin.\n"
-"Örneðin ``makinaismi.alanadý.com''.\n"
-"Eðer að geçiti kullanýyorsanýz bunun da IP numarasýný girmelisiniz."
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS sunucusu"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Að geçiti"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Að geçiti aygýtý"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Vekil sunucu ayarlarý"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP vekil sunucu"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP vekil sunucu"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr "Track að kart id'si (laptoplar için kullanýþlý)"
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Vekil sunucu http://... þeklinde olmalý."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Vekil sunucu ftp://... olmalý."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Ýnternet ayarlarý"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Ýnternet baðlantýsýný þimdi denemek ister misiniz?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Baðlantýnýz test ediliyor..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Sistem þu anda internete baðlý."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Güvenlik nedenleri ile baðlantýnýz kapatýlacaktýr."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Sistem internete baðlý gibi görünmüyor.\n"
-"Baðlantýyý tekrar ayarlamayý deneyin."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Baðlantý Ayarlarý"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Lütfen aþaðýdaki alaný doldurun ya da kontrol edin."
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "Kartýn IRQ deðeri"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Kartýn DMA deðeri"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "Kartýn IO deðeri"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "Kartýn IO_0 deðeri"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "Kartýn IO_1 deðeri"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Kiþisel telefon numaranýz"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Servis saðlayýcý adý"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Servis saðlayýcýnýn telefon numarasý"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "1. Alan adý sunucusu"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "2. Alan adý sunucusu"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "Ülkenizi seçin"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Çevirme kipi"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Baðlantý hýzý"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "Baðlantý zaman aþýmý (saniyede)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Kullanýcý Adý"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Parola"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Mantýksal bölüm bu platform tarafýndan desteklenmiyor"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Bölümlendirme tablonuzda bir boþluk var ama kullanýlamaz durumda.\n"
-"Bu boþluðu, birinci bölümünüzü en yakýnýndaki mantýksal bölüme taþýyarak\n"
-"sorunu çözebilirsiniz."
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "%s dosyasýndan kurtarýlmasýnda hata: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Hatalý yedekleme dosyasý"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "%s dosyasýna yazarken hata oluþtu"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Diskinizde bir þeyler kötü gidiyor.\n"
-"Veri bütünlüðünün denetlenmesi baþarýsýz oldu.\n"
-"Bu durumda bu diske yazýlan her þey çöpe gitmiþ olacak."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "zorunlu"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "önemli"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "çok hoþ"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "güzel"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "belki"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Genel Unix Yazdýrma Sistemi"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Yeni Oluþum"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Satýr yazdýrma Daemonu"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Kuyruða deðil doðrudan yazýcýya gönder"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Yerel Yazýcý"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Uzaktaki Yazýcý"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "Uzaktaki CUPS sunucusundaki yazýcý"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "Uzaktaki lpd sunucusundaki yazýcý"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Að Yazýcýsý (socket)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT sunucusundaki yazýcý"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "Yazýcý Sunucusundaki yazýcý"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "URI aygýtý için bir yazýcý girin"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "Bir komuttaki baðlama iþi"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "Bilinmeyen Model"
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr "Temel yazýcý (sürücüsüz)"
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(%s de)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "(bu makinede)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Yazýcý Baðlantýsý Seçin"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Yazýcýnýz ne þekilde baðlý?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"Uzak bir CUPS sunucusuyla, hiçbir yazýcýyý yapýlandýrmanýz\n"
-"gerekmemekte; her türlü yazýcý otomatik olarak bulunacaktýr.\n"
-"Emin deðilseniz \"Uzak CUPS sunucusundaki yazýcý\"'yý seçin."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Hiç Biri"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-msgid "Choose a default printer!"
-msgstr "Öntanýmlý yazýcýyý belirtin!"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-"Uzak CUPS sunucularýnda ki yazýcýlarý burada yapýlandýramazsýnýz.\n"
-"CUPS sunucularý kendi yazýcýlarý hakkýnda makinanýza bilgi verecektir.\n"
-"Makinanýzda ki bilinen tüm yazýcýlar \"Öntanýmlý yazýcý\" alanýnda\n"
-"listelenmiþtir. \"Yazýcýlarý Uygula/Yeniden-oku\" düðmesi ile burada\n"
-"öntanýmlý yazýcýnýzý belirtebilirsiniz. Ayný düðme ile listeyi yeniden\n"
-"okutabilirsiniz. (bu iþlem CUPS'un baþlatýlmasýndan sonra tüm uzak\n"
-"yazýcýlarýn görünür olmasýna kadar 30 saniye kadar sürebilir)\n"
-"CUPS sunucularý baþka bir að üzerindeyse, CUPS sunucusunun IP adresi\n"
-"ile seçimlik olarak yazýcý bilgilerinin alýnacaðý port numarasýný\n"
-"verebilirseniz. Ayný aðdaysanýz bu alanlarý boþ býrakýnýz."
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalde, CUPS að ortamýnýza baðlý olarak otomatikman yapýlandýrýlýr.\n"
-"Böylece, yerel aðýnýzda ki CUPS sunucularýna eriþebilirsiniz.\n"
-"Bu iþlem doðru sonuçlanmazsa \"Otomatik CUPS yapýlandýrmasý\"ný kapatýr\n"
-"ve /etc/cups/cupsd.conf dosyasýný kendiniz düzenleyebilirsiniz. Ýþlem\n"
-"tamamlandýktan sonra \"service cups restart\" komutu ile CUPS'u\n"
-"baþlatmayý unutmayýnýz."
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Kapat"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "Yazýcýlarý Uygula/Yeniden-oku"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresi 192.168.1.20 gibi olmalýdýr"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "Port numarasý bir tamsayý olmalýdýr."
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "Öntanýmlý yazýcý"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "CUPS sunucu IP"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Kapý"
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr "Otomatik CUPS yapýlandýrmasý"
-
-#: ../../printerdrake.pm_.c:217
-msgid "Detecting devices ..."
-msgstr "Aygýtlar taranýyor ..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Portlarý test et"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "\"%s\" modelinde bir yazýcý bulundu:"
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Yerel Yazýcý Aygýtý"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Yazýcýnýz hengi aygýta baðlý? \n"
-"(/dev/lp0, LPT1'e karþýlýk gelir)\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Yazýcý Aygýtý"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "Aygýt/dosya ismi yok!"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-msgid "Reading printer database ..."
-msgstr "Yazýcý veri tabaný okunuyor ..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Uzak Yazýcý (lpd) Seçenekleri"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Uzaktaki bir lpd yazýcý kuyruðunu kullanmak için,\n"
-"yazýcýnýn baðlý olduðu makinanýn adýný ve yazýcý\n"
-"ismini vermeniz gerekmektedir."
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "Uzak makina adý"
-
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "Uzak yazýcý adý"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "Uzak makina adý yok!"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "Uzak yazýcý ismi yok!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Yazýcý Seçenekleri"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Bir SMB yazýcýdan çýktý almak için, SMB makina adý, yazýcý sunucunun \n"
-"IP adresi, yazýcýnýn paylaþým adý, çalýþma grubu, kullanýcý adý ve \n"
-"parola verilmelidir."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "SMB sunucu adý"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "SMB sunucu IP"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Paylaþým adý"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Çalýþma grubu"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Ya sunucu ismi ya da sunucunun IP adresi verilmelidir!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "Samba paylaþým ismi yok!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "NetWare Yazýcý Ayarlarý"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Bir NetWare yazýcýdan çýktý alacaksanýz, NetWare yazdýrma sunucunun ismi\n"
-"(TCP/IP makina isminden farklý bir isme sahip olabilir), kullanacaðýnýz\n"
-"yazdýrma kuyruðunun ismi, kullanýcý adý ve parolasý verilmelidir."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Yazdýrma Sunucusu"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Yazýcý Kuyruk Adý"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "NCP sunucusu ismi yok!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "NCP kuyruðu ismi yok!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Soket Yazýcýsý Seçenekleri"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Bir soket yazýcýsýndan çýktý alacaksanýz, yazýcýnýn baðlý olduðu makina "
-"adýný\n"
-"ve seçimlik olarak port numarasýný vermeniz gereklidir.\n"
-"HP JetDirect sunucularda port numarasý genelde 9100 dür, diðer sunucularda\n"
-"farklý olabileceðinden donanýmýn kýlavuzuna bakmanýz önerilir."
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "Yazýcýnýn makina ismi"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "Yazýcýnýn makina ismi yok!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "Yazýcý Aygýtý URI'si"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Yazýcýya eriþmek için doðrudan URI belirtebilirsiniz. URI, ya CUPS ya da\n"
-"Foomatic özelliklerini içermelidir.\n"
-"Bilgi: Her URI türünü her yazýcý havuzu desteklemez."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "Geçerli bir URI girilmelidir!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Her yazýcýnýn bir ismi olmalýdýr (örneðin: lp).\n"
-"Açýklama ve Yeri alanlarýný doldurmak gerekmez.\n"
-"Onlar kullanýcýlara bilgi vermek içindir."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Yazýcýnýn ismi"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Taným"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Konum"
-
-#: ../../printerdrake.pm_.c:701
-msgid "Preparing printer database ..."
-msgstr "Yazýcý veritabaný hazýrlanýyor ..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "Yazýcý model seçimi"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "hangi model bir yazýcýnýz var?"
-
-#: ../../printerdrake.pm_.c:866
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinter yapýlandýrmasý"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-"Bir OKI laser winprinter yapýlandýracaksanýz bazý koþullarý\n"
-"saðlamalýsýnýz. Bu yazýcýlar çok özel haberleþme protokolleri\n"
-"kullanýrlar ve sadece ilk paralel porta baðlý olarak çalýþýrlar.\n"
-"Yzaýcýnýz diðer paralel porta ya da bir að yazdýrma sunucusuna\n"
-"baðlýysa önce onu makinanýzýn birinci paralel portuna baðlamalýsýnýz.\n"
-"Aksi takdirde, yazýcý çalýþmayacak, baðlantý türü ayarlarýnýz\n"
-"sürücü tarafýndan yoksayýlacaktýr."
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet yapýlandýrmasý"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-"Lexmark tarafýndan saðlanan mürekkep püskürtmeli yazýcý sürücüleri\n"
-"sadece yerel yazýcýlarý destekler. Yazýcýnýzý yapýlandýrmak için\n"
-"lütfen doðrudan makinanýza baðlayýnýz."
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-"Lexmark inkjet ile yazdýrmak ve bu kurulumda kullanmak\n"
-"için mürekkep püskürtmeli yazýcý sürücüsüne ihitiyacýnýz\n"
-"var. Bu sürücüyü http://www.lexmark.com/ adresinde\n"
-"rpm paketi olarak bulabilirsiniz. Bu adrese gittiðinizde\n"
-"\"Drivers\" baðýný kullanarak eriþeceðiniz sayfadan\n"
-"yazýcýnýzý bulduktan sonra iþletim sistemini \"Linux\"\n"
-"seçiniz. Gelen rpm paketi kurulum için bir etkileþimli\n"
-"grafik arayüz saðlasa da bu kurulum sýrasýnda bu grafik\n"
-"arayüz kullanýlmayacaðýndan lisans kabulünün hemen ardýndan\n"
-"sürücünün kurulumunu durdurmalýsýnýz. \"lexmarkmaintain\"\n"
-"ile kafa ayar sayfasý yazdýrdýktan sonra bu uygulama ile\n"
-"kafa ayarlarýný yapýn."
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"Yazýcý öntanýmlý ayarlarý\n"
-"Sayfa boyutu (ve varsa) mürekkep türünün doðru\n"
-"verildiðinden emin olmalýsýnýz.\n"
-"Bilgi: Yazýcýnýn yazdýrma kalitesi yükseldikçe\n"
-"yazdýrma hýzý düþecektir."
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "%s seçeneði bir tamsayý olmalýdýr!"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "%s seçeneði bir sayý olmalýdýr!"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "%s seçeneði kapsamdýþý!"
-
-#: ../../printerdrake.pm_.c:1136
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Bu yazýcýyý (\"%s\")\n"
-"öntanýmlý yazýcý yapmak istiyor musunuz?"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "Deneme sayfasý"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"Lütfen yazdýrmak istediðiniz deneme sayfalarýný seçiniz.\n"
-"Bilgi: Fotoðraflý deneme sayfasýnýn yazdýrýlmasý uzun zaman alabilir\n"
-"ve belleði yetersiz bir laser yazýcý ile çýktý alýnamayabilir.\n"
-"Kurulum sýrasýnda standart bir deneme sayfasý çýktýsý almak yeterlidir."
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "Deneme sayfasýz"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "Yazdýr"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "Standart deneme sayfasý"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr "Alternatif deneme sayfasý(mektup)"
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr "Alternatif dememe sayfasý (A4)"
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "Resim deneme sayfasý"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Deneme sayfasý basýlýyor..."
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Deneme sayfasý yazýcýya gönderildi.\n"
-"Yazýcýnýn çalýþmasý için bir az bir zaman geçebilir.\n"
-"Yazdýrma durumu:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Deneme sayfasý yazýcýya gönderildi.\n"
-"Yazdýrmanýn baþlamasý biraz zaman alabilir.\n"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "Düzgün olarak çalýþýyor mu?"
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-msgid "Raw printer"
-msgstr "Temel yazýcý"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Bir dosyayý komut satýrýndan doðrudan yazdýrmak isterseniz \"%s<dosya>\" "
-"komutunu ya da bir grafik arayüzlü yazdýrma aracý kullanmak\n"
-"isterseniz \"xpp <dosya>\" veya \"qtcups <dosya>\" komutlarýný\n"
-"kullanabilirsiniz\n"
-"dosyayý uygulama saðlayacaðýndan dosya ismi verilmez.\n"
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ayrýca bir çok uygulamanýn yazdýrma diyaloglarýnýn \"Yazdýrma komutu\" "
-"alanýnda\n"
-"bu komutlardan birini kullanabilirsiniz. Ancak bu tür kullanýmda "
-"yazdýrýlacak\n"
-"dosyayý uygulama saðlayacaðýndan dosya ismi verilmez.\n"
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"\"%s\" komutu ile ayrýca herhangi bir yazdýrma iþleminin\n"
-"ayarlarýný da deðiþtirebilirsiniz. Bu ayarlarý komut satýrýndan\n"
-"girebilirsiniz.\n"
-"\n"
-"Kullanýmý: \"%s <dosya>\". "
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-"Þimdiki yazýcýnýz için mümkün seçeneklerin bir listesini aþaðýdan\n"
-"okuyabileceðiniz gibi \"Seçenek listesini yazdýr\" düðmesine týklayarak da\n"
-"alabilirsiniz.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Bir dosyayý komut satýrýndan doðrudan yazdýrmak isterseniz \"%s <dosya>\".\n"
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ayrýca bir çok uygulamanýn yazdýrma diyaloglarýnýn \"Yazdýrma komutu\" "
-"alanýnda\n"
-"bu komutu kullanabilirsiniz. Ancak bu tür kullanýmda yazdýrýlacak\n"
-"dosyayý uygulama saðlayacaðýndan dosya ismi verilmez.\n"
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-"Þimdiki yazýcýnýz için mümkün seçeneklerin bir listesini aþaðýdan\n"
-"okuyabileceðiniz gibi \"Seçenek listesini yazdýr\" düðmesine týklayarak da\n"
-"alabilirsiniz.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Bir dosyayý komut satýrýndan doðrudan yazdýrmak isterseniz \"%s <dosya>\" ya "
-"da \"%s <dosya>\".\n"
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Bir grafik arayüz\n"
-"tercih ediyorsanýz \"xpdq\" kullanarak yazdýrýlacaklarý ve seçenekleri\n"
-"belirleyebilirsiniz.\n"
-"Masaüstü yöneticisi olarak KDE kullanýyorsanýz, yazýcýnýn kaðýt yemesi "
-"halinde\n"
-"masaüstünüzde bulunan \"Yazýcýyý DURDUR!\" düðmesini kullanabilirsiniz.\n"
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"\"%s\" ve \"%s\" komutlarý ile ayrýca herhangi bir yazdýrma iþleminin\n"
-"ayarlarýný da deðiþtirebilirsiniz. Bu ayarlarý komut satýrýndan\n"
-"girebilirsiniz.\n"
-"\n"
-"Kullanýmý: \"%s <dosya>\".\n"
-
-#: ../../printerdrake.pm_.c:1292
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "\"%s\" Yazýcýsýndan yazdýrýlýyor"
-
-#: ../../printerdrake.pm_.c:1294
-msgid "Print option list"
-msgstr "Seçenekleri listesini yazdýr"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "Yazýcý verisi okunuyor ..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "yazýcý yapýlandýrmasýný aktar"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-"Yazdýrma hazuzunuzu %s yerine %s yapmak için yazýcý yapýlandýrmanýzý\n"
-"kopyalayabilirsiniz.Tüm yapýlandýrma bilgileri (yazýcý ismi, açýklamasý,\n"
-"yeri, baðlantý türü ve öntanýmlý seçenekler) kopyalanýrken, bekleyen iþler\n"
-"aktarýlmayacaktýr.\n"
-"Bilgi: Aþaðýda ki sebeplerden dolayý tüm kuyruklar da aktarýlabilir:\n"
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-"Novell sunucularý üzerindeki yazýcýlara ve Novell yazýcýlarýna bir\n"
-"komutla veri gönderilmesini CUPS desteklemez.\n"
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-"PDQ sadece yerel yazýcýlarý, LPD yazýcýlarýný ve\n"
-"Soket/TCP yazýcýlarýný destekler.\n"
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ve LPRng, IPP yazýcýlarý desteklemez.\n"
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-"Ek olarak, kuyruklar bu programla oluþturulmaz ya da\n"
-"\"foomatic-yapýlandýrma\" aktarýlamaz."
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-"\n"
-"Ayrýca CUPS sürücüleri ya da üreticileri tarafýndan\n"
-"saðlanan PPD dosyalarý ile yapýlandýrýlan yazýcýlar\n"
-"aktarýlamaz."
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Aktarmak istediðiniz yazýcýlarý iþaretledikten sonra\n"
-"\"Aktar\" düðmesine týklayýnýz."
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "Yazýcýlar aktarýlmasýn"
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "Aktar"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"\"%s\" isimli yazýcý zaten %s altýnda var.\n"
-"\"Aktar\" düðmesiyle üzerine yazabilirsiniz.\n"
-"Ayrýca yeni bir isim girebilir ya da\n"
-"bu yazýcýyý atlayabilirsiniz."
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Yazýcý ismi sadece harfler, rakamlar ve alt çizgi içerebilir."
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"\"%s\" yazýcýsý zaten var.\n"
-"Onun yapýlandýrmasýnýn üzerine yazýlmasýný\n"
-"gerçekten istiyor musunuz?"
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "Yeni Yazýcý adý"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "%s Transfer ediliyor ..."
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-"Öntanýmlý yazýcýnýzý da (\"%s\") aktardýnýz.\n"
-"Yeni yazdýrma sistemi %s altýnda da\n"
-"öntanýmlý yazýcý olsun mu?"
-
-#: ../../printerdrake.pm_.c:1423
-msgid "Refreshing printer data ..."
-msgstr "Yazýcý verisi tazeleniyor ..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr "Að yazýcýsý yapýlandýrmasý"
-
-#: ../../printerdrake.pm_.c:1432
-msgid "Starting network ..."
-msgstr "Að baþlatýlýyor ..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-msgid "Configure the network now"
-msgstr "Að þimdi yapýlandýrýlsýn"
-
-#: ../../printerdrake.pm_.c:1455
-msgid "Network functionality not configured"
-msgstr "Að iþlevselliði yapýlandýrýlmamýþ"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-"Bir að yazýcýsý yapýlandýrmak için að eriþine ihtiyacýnýz var,\n"
-"ancak aðýnýz henüz yapýlandýrýlmamýþ. Bir að yapýlandýrmasý\n"
-"olmaksýzýn þimdi yapýlandýrýlacak yazýcýyý kullanamayacaksýnýz.\n"
-"Ne yapmak istersiniz?"
-
-#: ../../printerdrake.pm_.c:1463
-msgid "Go on without configuring the network"
-msgstr "Að yapýlandýrýlmadan devam edilsin"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-"Kurulum sýrasýnda yapýlan að yapýlandýrmasý þimdi\n"
-"baþlatýlamaz. Daha sonra, sisteminizi baþlattýðýnýzda,\n"
-"að eriþiminizi saðladýktan sonra Mandrake Kontrol Merkezi'nde\n"
-"\"Að ve Internet\"/\"Baðlantý\" bölümünden ya da\n"
-"\"Donaným\"/\"Yazýcý\" bölümünden að yazýcýnýzý\n"
-"yapýlandýrabilirsiniz."
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-"Að eriþiminiz yok ve baþlatýlamadý.\n"
-"Lütfen yapýlandýrmanýzý ve donanýmýnýzý\n"
-"kontrol ettikten sonra að yazýcýnýzý\n"
-"yapýlandýrmayý tekrar deneyin."
-
-#: ../../printerdrake.pm_.c:1516
-msgid "Restarting printing system ..."
-msgstr "Yazdýrma sistemi baþlatýlýyor ..."
-
-#: ../../printerdrake.pm_.c:1548
-msgid "high"
-msgstr "yüksek"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "paranoid"
-msgstr "paranoyak"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "%s güvenlik seviyesinde yazdýrma sistemi kurulumu"
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-"%s yazdýrma sistemini %s güvenlik seviyesinde çalýþtýracak\n"
-"bir kuruluma baþlamak üzeresiniz.\n"
-"\n"
-"Bu yazdýrma sistemi, yazdýrma iþlerini beklerken ve yazdýrýrken\n"
-"bir artalan süreci olarak çalýþýr. Bu sürece að üzerindeki diðer\n"
-"makinalar tarafýndan da eriþilebilir ve saldýrýlara açýktýr.\n"
-"Diðer yandan, sadece bir kaç benzer uygulama bu güvenlik seviyesinde\n"
-"öntanýmlý olarak baþlatýlabilir.\n"
-"\n"
-"Bu makinadan yazdýrmayý yapýlandýrmayý gerçekten istiyor musunuz?"
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Starting the printing system at boot time"
-msgstr "Açýlýþ sýrasýnda yazdýrma sisteminin baþlatýlmasý"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-"Yazdýrma sistemi (%s) makinanýn açýlýþý sýrasýnda\n"
-"otomatik olarak baþlatýlmayacaktýr.\n"
-"\n"
-"Yazdýrma sistemi potansiyel saldýrý noktasý olduðundan,\n"
-"daha yüksek bir güvenlik seviyesi gereksiniminden dolayý\n"
-"otomatik baþlatmayý kapatmak daha uygun olacaktýr.\n"
-"\n"
-"Yazdýrma sisteminin otomatik baþlatýlmasýný\n"
-"yine de istiyor musunuz?"
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "Kurulu yazýlým denetleniyor..."
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "LPRng Kaldýrýlýyor..."
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "LPD Kaldýrýlýyor..."
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Yazýcý makarasýný seçin"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hangi yazdýrma sistemini (makara) kullanmak istiyorsunuz?"
-
-#: ../../printerdrake.pm_.c:1759
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "\"%s\" yazýcýsýný yapýlandýr ..."
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Yazýcý seçenekleri"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr "PrinterDrake hazýrlanýyor ..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "Yazdýrmayý ayarlamak istiyor musunuz?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr "Sistem yazýdýrýlýyor: "
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-"Aþaðýdaki yazýcýlar yapýlandýrýldý.\n"
-"Bir yazýcý hakkýnda bilgi almak ya da\n"
-"üzerinde deðiþiklik yapmak için ona\n"
-"týklayýnýz. Yeni bir yazýcý eklemek\n"
-"için \"Yazýcý Ekle\" düðmesine týklayýnýz."
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Normal Kip"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Öntanýmlý)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Uzaktaki CUPS sunucusu(lar)daki yazýcý(lar)"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-msgid "Printer(s) on remote server(s)"
-msgstr "Uzaktaki sunucu(lar)daki yazýcý(lar)"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Yazýcý Ekle"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-msgid "Do you want to configure another printer?"
-msgstr "Baþka yazýcý yapýlandýracak mýsýnýz?"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "Yazýcý Yapýlandýrmasýný düzenle"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Yazýcý %s: %s %s\n"
-"Bu yazýcýda neyi deðiþtireceksiniz?"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "YAP!"
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "Yazýcý baðlantýsý türü"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "Yazýcý ismi, açýklama, yeri"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "Yazýcý üreticisi, modeli, sürücüsü"
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "Yazýcý üreticisi, modeli"
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr "Bu yazýcýyý öntanýmlý yazýcý olarak belirle"
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "Deneme sayfalarýný yazdýr"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr "Bu yazýcýnýn nasýl yazdýrdýðýný bilmek için"
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "Yazýcý Kaldýr"
-
-#: ../../printerdrake.pm_.c:2071
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Eski '%s' yazýcýsý kaldýrýlýyor ..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "\"%s\" yazýcýsý öntanýmlý yazýcý olarak belirlendi"
-
-#: ../../printerdrake.pm_.c:2103
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "'%s' Yazýcýsýný kaldýrmak istediðinize emin misiniz ?"
-
-#: ../../printerdrake.pm_.c:2105
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "'%s' yazýcýsý kaldýrýlýyor ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Vekil ayarlarý"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Vekil yapýlandýrma aracýna hoþ geldiniz.\n"
-"\n"
-"Burada, http ve ftp vekillerini kullanýcý ismi ve parolasý\n"
-"olsun/olmasýn yapýlandýrabilirsiniz\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Lütfen http vekili bilgilerini giriniz.\n"
-"Bir http vekili kullanmayacaksanýz boþ býrakýnýz."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "Kapý"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url baþlangýcý 'http:' þeklinde olmalýdýr"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Kapý numarasý rakamsal olmalýdýr."
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Ftp vekil sunucu bilgisini doldurunuz\n"
-"Eðer vekil sunucu kullanmak istemiyorsanýz boþ býrakýnýz."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url baþlangýcý 'ftp:' þeklinde olmalýdýr"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Lütfen vekil sunucu kullanýcýadý ve parolasýný giriniz,\n"
-"Eðer kullanýcýadý ve parola girmek istemiyorsanýz boþ býrakýn"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "Kullanýcý"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Parola"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "Parolayý tekrar biçimle"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Parolalar uyuþmuyor. Tekrar deneyin!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Biçemlendirilmiþ RAID md%d'ye disk bölümü eklenemedi"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "%s dosyasýna yazýlamadý"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid baþarýsýz"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid baþarýsýz (raidtools eksik olabilir mi?"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "%d. seviye RAID için yetersiz sayýda disk bölümü\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ALSA (Geliþmiþ Linux Ses Mimarisi) ses sistemi baþlatýlýyor"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, periyodik komut zamanlayýcýsý"
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd pil durumunu izlemek için ve syslog aracýlýðýyla bunun kaydýný tutmak "
-"için kullanýlýr.\n"
-"Ayrýca pil azaldýðýnda sistemi kapatmak için de kullanýlýr."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"at komutu, zamanlanan komutlarý çalýþmalarý gereken zamanlarda çalýþtýrýr.\n"
-"Sistem yükü yeterince düþük olduðunda yýðýn komutlarý çalýþtýrýr."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron, kullanýcýlara özel komutlarý peritodik zamanlamalarla çalýþtýrabilen\n"
-"standart bir UNIX programýdýr. vixie cron, standart cron'a eklenmiþ birçok\n"
-"yeni özellik içerir."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM, Midnight Commander gibi metin tabanlý uygulamalara fare desteði ekler.\n"
-"Ayrýca konsolda fareyle kesme ve yapýþtýrma iþlemlerine izin verir.\n"
-"Konsolda pop-up menü desteði saðlar."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake donaným analizini ve yapýlandýrma seçeneklerini baþlatýr\n"
-"donaným yenileme/deðiþtirme."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache bir World Wide Web sunucusudur. HTML dosyalarý ve CGI sunumu için "
-"kullanýlýr."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver daemon (çoðunlukla inetd olarak adlandýrýlýr) birçok \n"
-"baþka internet servisini gerektiðinde çalýþtýrýr. Ýçinde telnet, ftp, rsh ve "
-"rlogin gibi pekçok programýn bulunduðu servisleri çalýþtýrmakla yükümlüdür.\n"
-"inetd'yi sistemden çýkarmak, onun çalýþtýrmakla yükümlü olduðu bütün "
-"servisleri \n"
-"kaldýrmak anlamýna gelir."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Bilgisayarýnýzý diðer aðlardan koruma amacýyla ateþ duvarý kurma uygulamasý "
-"için\n"
-"Linux kernel 2.2 serisi için hazýrlanmýþ paket filitrelemesini baþlatýr."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Bu paket /etc/sysconfig/keyboard'daki seçili klavye düzenini yükler.\n"
-"Hangi klavye düzeninin kullanýlýcaðý kbdconfig ile ayarlanabilir.\n"
-"Bu, mandrake kurulan birçok makinede etkin olarak býrakýlmalýdýr."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"/usr/include/linux/{autoconf,version}.h için\n"
-"/boot içinde çekirdek baþlýðýnýn otomatik yeniden üretimi"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Açýlýþta donaným algýlamasý ve yapýlandýrmasý."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf ile, sistem açýlýþý sýrasýnda çeþitli iþlemlerin uygulanýþýný\n"
-"sistem yapýlandýrmasý baðlamýnda düzenlenebilir."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd, lpr'nin düzgün olarak çalýþmasý için gerekli yazýcý daemonudur.\n"
-"lpd temel olarak, yazdýrma görevlerini yöneten ve onlarý yazýcýya gönderen "
-"sunucudur."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Sanal Sunucu, yüksek performans ve yüksek\n"
-"eriþilebilirlik kullanýmýný saðlar."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) sunucu isimlerini IP adreslerine dönüþtüren \n"
-"Alan Adý Sunucusudur (DNS)."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Bütün Að Dosya Sistemlerini (NFS), SMB (Lan Manager/Windows), ve \n"
-"NCP (NetWare) baðlama noktalarýný baðlar ve ayýrýr."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Açýlýþ sýrasýnda baþlamak için ayarlanmýþ bütün að arayüzlerini aktive eder/"
-"kapatýr."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS TCP/IP aðlarda dosya paylaþýmý için kullanýlan popüler bir protokoldür.\n"
-"Bu servis, /etc/exports dosyasýnda ayarlarý bulunan NFS sunucusunun \n"
-"kullanýmýný saðlar."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS TCP/IP aðlarda dosya paylaþýmý için kullanýlan popüler bir \n"
-"protokoldür. Bu servis NFS dosya kilidi kullanýmýný saðlar."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Baþlangýçta Xwindows ve konsol altýnda tuþ kilidini\n"
-"her baþlangýçta açar."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "OKI 4w ve windows uyumlu yazýcýlarý destekler."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA desteði, laptoplarda ethernet ve modem gibi aygýtlarýn "
-"desteklernmesini\n"
-"saðlar. Ayarlanmadýðý sürece açýlýþta çalýþmayacaktýr, çalýþmasýna ihtiyaç "
-"duyulmayan \n"
-"makinalarda kurulu olmasý sorun oluþturmayacaktýr."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper, NFS ve NIS gibi protokoller tarafýndan kullanýlan RPC \n"
-"baðlantýlarýný düzenler. Portmap sunucusu RPC mekanizmasýný kullanan\n"
-"protokollerle servis yapan makinelerde kurulu ve çalýþýyor durumda olmalýdýr."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Posfiz, elektronik postalarý bir makinadan diðerine yollayan \n"
-"Elektronik Posta Aktarma Görevlisidir."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Yüksek kalite rastgele sayý üretimi için sistem entropi havuzunun \n"
-"saklanmasý ve yeniden eski haline getirilmesini saðlar."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Oracle gibi bazý uygulamalarla kullanmak için\n"
-"blok aygýtlarýný (örn: sabit disk bölümleri)\n"
-"temel aygýtlarla eþlendirir"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed daemonu otomatik IP router tablosunun RIP protokolü tarafýndan\n"
-"yenilenmesine izin verir. RIP genelde küþük aðlarda kullanýlýr, daha büyük\n"
-"aðlarda daha karmaþýk routing protokollerine ihtiyaç vardýr."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokolü bir aðdaki kullanýcýlarýn o aðdaki herhangi bir\n"
-"makina hakkýnda performans ölçüleri alabilmelerini saðlar."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokolü bir aðdaki kullanýcýlarýn o aðda bulunan makinalarda\n"
-"çalýþan kullanýcýlarý görmenizi saðlar."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokolü, uzak kullanýcýlarýn, rwho daemonu çalýþtýran bir makinada\n"
-"bulunan tüm kullanýcýlarý görmelerine izin verir."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Ses sistemini Makinede uygula"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog, birçok daemonun mesajlarýný çeþitli sistem kayýt dosyalarýnda\n"
-"tutmalarýna izin verir. Syslog'un her zaman çalýþýr durumda olmasý\n"
-"akýllýca bir davranýþtýr."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "USB aygýtlarýnýz için dürücülerini yükleyiniz."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "X Font Sunucusu'nu çalýþtýrýr (bunun kullanýmý için XFree gerekir)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Açýlýþ sýrasýnda otomatik olarak baþlatýlacak hizmetleri seçiniz"
-
-#: ../../services.pm_.c:126
-msgid "Printing"
-msgstr "Yazdýrýlýyor"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Ýnternet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr "Dosya paylaþýmý"
-
-#: ../../services.pm_.c:132
-msgid "System"
-msgstr "Sistem"
-
-#: ../../services.pm_.c:137
-msgid "Remote Administration"
-msgstr "Uzak Yönetim"
-
-#: ../../services.pm_.c:145
-msgid "Database Server"
-msgstr "Veritabaný Sunucusu"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Hizmetler: %d / %d etkinleþtirildi"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Hizmetler"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "çalýþýyor"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "durdu"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Hizmetler ve artalan süreçleri"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Bu hizmet hakkýnda\n"
-"baþka bilgi yok."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Önyükleme"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Paketler kuruluyor..."
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Bölümlendirme tablonuz okunamýyor, galiba biraz bozulmuþ :-(\n"
-"Bozulmuþ bolümler düzeltilmeye çalýþýlacak"
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "Hata!"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Gerekli imaj dosyasý %s i bulamadým."
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "Otomatik kurulum yapýlandýrýcýsý"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Otomatik kurulum disketini yapýlandýrmak üzeresiniz. Bu özellik biraz "
-"tehlikelidir ve dikkatli kullanýlmalýdýr.\n"
-"\n"
-"Bu disket kullanýlarak yapýlan kurulum bazý aþamalarda bazý deðerlerin "
-"girilmesi için etkileþimli olacaktýr.\n"
-"\n"
-"Güvenliðiniz için, disk bölümlendirme ve biçemlendirme kesinlikle otomatik "
-"olarak yapýlmayacaktýr.\n"
-"\n"
-"Devam etmek istiyor musunuz?"
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "Otomatik adým yapýlandýrmasý"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Lütfen kurulumun etkileþimli olmasýný istediðiniz aþamalarýný seçiniz, "
-"seçmezseniz bu iþi kendiniz elle yapmak zorunda kalacaksýnýz."
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Tebrikler!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disket kusursuzca oluþturuldu.\n"
-"Geride kalan kurulumunuza devam edebilirsiniz."
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Ýnternet Baðlantýsý Paylaþýmý"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Ýnternet Baðlantýsý Paylaþýmý þu anda etkin"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ýnternet baðlantýsý paylaþýmý ayarlarý zaten yapýlmýþ durumda.\n"
-"Paylaþým þu anda etkin.\n"
-"\n"
-"Ne yapmak istersiniz?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "pasif"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "vazgeç"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "yeniden ayarla"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Servisler Pasifleþtiriliyor..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Ýnternet baðlantýsý paylaþýmý þu anda pasifleþtirildi."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Ýnternet baðlantýsý paylaþýmý þu anda etkin deðil"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ýnternet baðlantýsý paylaþýmý ayarlarý zaten yapýlmýþ durumda.\n"
-"Paylaþým þu anda etkin deðil.\n"
-"\n"
-"Ne yapmak istersiniz?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "Etkinleþtir"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Servisleri Etkinleþtir..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Ýnternet Baðlantýsý Paylaþýmý þu anda etkinleþtirildi."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Bilgisayarýnýz internet baðlantýsýný paylaþmak için ayarlanabilirsiniz.\n"
-"Bu özellik sayesinde aðýnýza baðlý diðer bilgisayarlarda internet "
-"üzerindenistedikleri bilgiye ulaþabilirler.\n"
-"\n"
-"Not: Yerel aðýnýzý(LAN) ayarlamak için bir að baðdaþtýrýcýsýna (ethernet "
-"cartýna)ihtiyacýnýz var."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "%s Arayüzü (%s kullaným modülü)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "%s Arayüzü"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Sisteminizde að baðdaþtýrýcýsý bulunamadý!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Sisteminizde ethernet að baðdaþtýrýcýsý bulunamadý. Lütfen donaným ayar "
-"aracýný çalýþtýrýn."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Að arabirimi"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Sisteminizde sadece bir tane yapýlandýrýlmýþ að baðdaþtýrýcýsý bulunuyor:\n"
-"\n"
-"%s\n"
-"\n"
-"Yerel aðýnýzý ben þimdi bu baðdaþtýrýcýyla yapýlandýracaðým."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Lütfen hangi að baðdaþtýrýcýsýnýn yerel aðýnýza baðlanacaðýný seçin."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Uyarý, að baðdaþtýrýcýsý zaten yapýlandýrýlmýþ. Ben onu Tekrar "
-"yapýlandýracaðým."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "%s ayarlarýnda muhtemel bir yerel að adresi çakýþmasý bulundu!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Bir ateþ duvarý yapýlandýrýlmasý bulundu!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Uyarý! Hazýr bir ateþ duvarý yapýlandýrmasý bulundu. Kurulumdan sonra birkaç "
-"düzeltmeye ihtiyaç duyabilir."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Yapýlandýrýlýyor..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Betikler ayarlanýyor, yazýlým kuruluyor, sunucular baþlatýlýyor..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "%s paketi kurulumunda problem"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Tüm ayarlar tamam.\n"
-"Þimdi internet baðlantýsýný otomatik að yapýlandýrýlmasý (DHCP) ile yerel "
-"aðýnýzdaki baþka bilgisayarlara paylaþtýrabilirsiniz."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Ayarlar daha önceden yapýlmýþ þekilde , ama o pasif halde ayarlý."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Ayarlar daha önceden yapýlmýþ þekilde ,ve o aktif halde ayarlý."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Ýnternet Baðlantýsý Paylaþýmý yapýlandýrmasý yok"
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Ýnternet baðlantýsý paylaþýmý yapýlandýrmasý"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Ýnternet Baðlantýsý Paylaþýmý uygulama gereçlerine hoþgeldiniz!\n"
-"\n"
-"%s\n"
-"\n"
-"Ayarlama sihirbazýný baþlatmak için \"Yapýlandýr\"a basýn!"
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Að Yapýlandýrmasý(%d baðdaþtýrýcýlarý)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Profili sil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Silinecek Profil:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Yeni Profil..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Oluþturulacak olan profilin adý( bu profil þu ankinin bir kopyasý olacaktýr )"
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Sunucu adý:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Ýnternet Hesabý"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Tür:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Að geçiti:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Arayüz:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Durum:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Baðlanýldý"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Baðlanýlamadý"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Baðlan..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Baðlantýyý Kes..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Baðlantýnýz baþlatýlýyor..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Baðlantýnýz kapatýlýyor..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Baðlantý kapatýlamadý(kesilemedi).\n"
-"Siz bunu 'root' olarak kendiniz aþaðýdaki komutla deneyiniz\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"Tekrar görüþmek üzere"
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Sistem þu anda baðlantýsýný kesti."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Ýnternet Hesaplarýný Yapýlandýr..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "LAN yapýlandýrmasý"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Sürücü"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Arayüz"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "Durum"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Yerel aðý yapýlandýr.."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr "Sihirbazý baþlatmak için buraya týklayýnýz ->"
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Uygula"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Lütfen Bekleyiniz... Yapýlandýrmalar aktifleþtiriliyor"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Hiç bir arayüz yapýlandýrýlmamýþ.\n"
-"Yapýlandýrmak için ilk önce 'Yapýlandýra' týklayýn"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "LAN ayarlarý"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptör %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Boot Protokolü"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Boot edilince baþlatýlan"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP Clent"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "Etkinleþtir"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "Pasifleþtir"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Siz internet baðlantýsýna sahip deðilsiniz \n"
-"Oluþturmak için ilk adým olarak 'Yapýlandýr'a týklayýnýz"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Ýnternet baðlantýsý  ayarlarý"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Ýnternet baðlantýsý ayarlarý"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Baðlantý türü: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Paremetreler"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Að kartý"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP Programý"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Crackerlar hoþgeldiniz"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Zayýf"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Paranoyak"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Bu seviye RAID'i dikkatli kullanmanýzý öneririz. Sisteminiz daha kolay \n"
-"kullanýlacak, ancak hatalara karþý da duyarlýlýðý artacaktýr. Ýnternet'e \n"
-"baðlýysanýz bu seçimi yapmanýzý önermiyoruz. Parola eriþimi bulunmamaktadýr."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Parolalar etkinleþtirildi, yine de bir að üzerinde kullanmamanýz tavsiye "
-"edilir."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Bu güvenlik seviyesi için ek olarak daha fazla güvenlik uyarýsý ve \n"
-"denetlemesi bulunur."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Ýnternet'e baðlý bir makina için standart ve önerilen bir güvenlik "
-"seviyesidir."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Bu güvenlik seviyesiyle sistemin bir sunucu olarak kullanýmý mümkündür. \n"
-"Güvenlik, birden fazla istemcinin baðlanmasýna izin verecek þekilde "
-"artýrýlmýþtýr. "
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Sistem dýþarýdan gelecek baðlantýlara karþý tamamen kapalýdýr.\n"
-"Güvenlik en son seviyedir."
-
-#: ../../standalone/draksec_.c:65
-msgid "Security level"
-msgstr "Güvenlik seviyesi"
-
-#
-#: ../../standalone/draksec_.c:67
-msgid "Use libsafe for servers"
-msgstr "Sunucular için libsafe kullanýlsýn"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Tampon bellek taþmalarý ve biçem dizgesi saldýrýlarýna karþý savunma "
-"kitaplýðý."
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Güvenlik seviyesinin ayarlanmasý"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Denetim Merkezi"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Kullanmak istediðiniz araçlarý seçin"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "kullaným: keyboarddrake [--expert] [klavye]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Konsolda BackSpace duþunun Silme iþlemi yapmasýný ister misiniz?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Cd-rom'u deðiþtir"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Lütfen kurulum CD'sini sürücünüze yerleþtirin ve sonra Tamam'a basýn.\n"
-"Eðer elinizde yoksa, canlý güncellemeden vazgeçmek için Vazgeç'e basýn."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Canlý güncelleme baþlatýlamýyor !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "bir seri_usb aygýtý bulunamadý\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "3 tuþ öykünümü?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Ateþten Duvar Ayarlarý"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Ateþten Duvar Ayarlarý"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Ateþ Duvarý Kullanýlýyor\n"
-"\n"
-"Ateþ duvarý daha önceden yapýlandýrýlmýþ durumda.\n"
-"Deðiþiklik yapmak yada kaldýrmak için Ayarlara týklayýn"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Ateþ Duvarý Kulanýlýyor\n"
-"\n"
-"Ayarlara týklayýn ve standart bir ateþ duvarý olacaðýný ayarlayýn"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Kullanacaðýnýz dili seçin"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Kurulum sýnýfýný seçin"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Sabit disk seçimi"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Fare ayarlarý"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Klavyenizi seçin"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Güvenlik"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Dosya sistemleri Ayarlarý"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Bölümleri biçemlendir"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Kurulacak paketleri seçin"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Sistem kurulumu"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Kullanýcý Ekleme"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Að Ayarlarý"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Servis Ayarlarý"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Açýlýþ Disketi Oluþturma"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Sistem yükleyiciyi Kur"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X'i Ayarla"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Kurulumdan Çýk"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Kolay Güvenlik Duvarý Yapýlandýrýcý\n"
-"\n"
-"Bu Mandrake Linux makinasý için kiþisel güvenlik duvarýnýzý\n"
-"yapýlandýrýr. Güçlü bir güvenlik duvarý çözümü için, lütfen\n"
-"\"MandrakeSecurity Firewall\" daðýtýmýna bakýnýz."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Þimdi, Internet'te kullanmak istediðiniz hizmetler hakkýnda sorular\n"
-"sorulacaktýr. Makinanýzýn güvenliði çok önemlidir. Bu bakýmdan bu\n"
-"sorularý cevaplandýrýrken iyi düþünün.\n"
-"\n"
-"Lütfen, kullandýrmak istemediðiniz hizmetleri güvenlik duvarý ile "
-"kapatýnýz.\n"
-"Bu uygulamayý yeniden çalýþtýrarak her zaman bu yapýlandýrmayý\n"
-"deðiþtirebilirsiniz!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Internet'ten eriþilecek bir web sunucusu çalýþtýracak mýsýnýz?\n"
-"Web sunucusunu sadece kendi ihtiyaçlarýnýz için kullanacaksanýz,\n"
-"Internet'ten eriþilmesini istemiyorsanýz bu soruya\n"
-"\"HAYIR\" cevabý veriniz.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Bir isim sunucusu (DNS) çalýþtýracak mýsýnýz?\n"
-"Tüm Internet'e IP ve alan bilgileri sunumu yapmayacaksanýz\n"
-"lütfen bu soruya \"HAYIR\" cevabý veriniz.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Gelen Güvenlik Kabuðu (SSH) baðlantýlarýna izin verecek misiniz?\n"
-"Bu makinanýza giriþ yapmak isteyenlerin Telnet yerine kullanacaklarý\n"
-"yüksek güvenlikli bir kabuk sunar. Telnet kullanýyorsanýz hemen bu\n"
-"kabuðu kullanmaya baþlamanýz önerilir. Telnet kullanýldýðýnda sisteme\n"
-"giriþ parolanýz kolayca baþkalarý tarafýndan Ýnternet üzerinde ele\n"
-"geçirilebilir. Halbuki ssh parolanýzý da þifrelediðinden buna izin\n"
-"vermez."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Telnet baðlantýlarýna izin verecek misiniz?\n"
-"Önceki ekranda da açýklandýðý gibi ürkütücü þekilde güvensizdir.\n"
-"Bu soruya \"HAYIR\" cevabý vermeniz, gerekiyorsa telnet yerine ssh\n"
-"kullanmanýz önerilir.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Internet'ten eriþilebilir bir FTP hizmeti verecek misiniz?\n"
-"Bunu yapacaksanýz sadece anonim dosya aktarýmý için kullanýlmasý\n"
-"önerilir. FTP parola aktarýmý sýrasýnda þifreleme yapýlamadýðýndan,\n"
-"bu parolalar Internet'te kötü niyetli kiþilerce ele geçirilebilir.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Bir posta sunucusu çalýþtýracak mýsýnýz? \n"
-"Ýletilerinizi pine, mutt ya da herhangi bir metin tabanlý\n"
-"posta istemcisi ile gönderiyorsanýz bu hizmete ihtiyacýnýz\n"
-"olacaktýr. Aksi takdirde güvenlik duvarý bu hizmeti kapatacaktýr.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Bir POP ya da IMAP sunucusu çalýþtýracak mýsýnýz?\n"
-"Bu makina üzerinden web bazlý olmayan hesaplar\n"
-"sunmak için kullanýlýr.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Sisteminiz 2.2 serisi bir çekirdekle çalýþýyor gibi gözüküyor.\n"
-"Eðer að ip'niz otomatikmen evinizde ki veya ofisinizde ki bir bilgisayardan\n"
-" belirleniyorsa buna izin vermelisiniz . Bu konuda ne düþünüyorsunuz ?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Makinanýz zamaný baþka bir makinadan alacak mý?\n"
-"Çoðunlukla orta ya da büyük Unix/Linux aðlarýnda\n"
-"sistem giriþlerinde ve çeþitli ortak iþlerin yapýlmasý\n"
-"sýrasýnda eþzamanlamayý saðlamak üzere buna ihtiyaç\n"
-"duyulur. Büyük bir iþyerinde çalýþmýyorsanýz ya da bu\n"
-"konuda bir þey duymadýysanýz, bu özelliði kullanmayabilirsiniz."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Ayarlama Tamamlandý.Þimdi bu ayarlaý disk üzerine saklamamý istermisiniz ?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "%s açýlamýyor: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "%s yazmak için açýlamýyor : %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Að Öðesi (client)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS sunucusu, SMB sunucusu, Vekil Sunucu, ssh Sunucu"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Ofis"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome Ýþ istasyonu"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Palm Pilot ya da Visor'unuz için araçlar"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Ýþ istasyonu"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Ateþ Duvarý/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Alan adý ve Að bilgisi Sunucusu"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Ofis programlarý: kelime iþlemciler (kword, abiword), kspread, gnumeric, pdf "
-"göstericiler, vb.."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Sesle ilgili araçlar: mp3 ya da midi çalýcýlar, karýþtýrýcýlar, vb.."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Serbest Yazýlým ve Linux üzerine Kitaplar ve Nasýl dokümanlarý"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE Ýþ istasyonu"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Çoklu ortam - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "E-posta, haber grubu, web, dosya transferi ve sohbet araçlarý"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Veritabaný"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL veya MySQL veritabaný sunucusu"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Sisteminizin ayarlarýný düzenleyecek uygulama"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Çoklu ortam - Ses"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Gereçler"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Belgeler"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsol Araçlarý"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix Posta sunucusu, Inn haber sunucusu"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Ýnternet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Çoklu ortam"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Yapýlandýrma"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Diðer Grafiksel Masaüstleri (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "KDE Masaüstü Ortamý, temel grafik ortamla birlikte birleþik araçlar"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafik Ortamý"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Geliþtirme"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache ve Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "CD-R ve CD-RW yazmaya yarayan araçlar"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Ofis iþ istasyonu"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, vb.."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Gimp gibi grafik programlarý"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C ve C++ geliþtirme kütüphaneleri, programlar ve include dosyalarý"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Að Bilgisayar sunucusu"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Posta/Groupware/Haberler(News)"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Oyun Konsolu"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video göstericiler ve düzenleyiciler"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Çoklu ortam - Grafik"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Eðlence programlarý: arcade, strateji, vb.."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"E-posta alýþveriþi ve haber grubu istemci programlarý (pine, mutt, tin..) ve "
-"web istemcileri "
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arþivleme, emülatörler, izleme"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Kiþisel Finans"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Kullanýcý dostu uygulamalar ve masaüstü araçlarýna sahip görsel bir ortam "
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "ssh içeren diðer að öðeleri için protokoller"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Ýnternet gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Ses ve video çalma/düzenleme ugulamalarý"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Diðer Görsel Masaüstleri"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editörler, kabuklar, dosya araçlarý, terminaller"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Gnucash gibi finans programlarý"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Oyunlar"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Kiþisel Bilgi Yönetimi"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Çoklu ortam - CD Yazma"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Bilimsel Ýþ istasyonu"
-
diff --git a/perl-install/share/po/uk.po b/perl-install/share/po/uk.po
deleted file mode 100644
index 68274fd6c..000000000
--- a/perl-install/share/po/uk.po
+++ /dev/null
@@ -1,12052 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-# "Dmytro Koval'ov" <kov@tokyo.email.ne.jp>, 1999, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-09-13 18:59+09:00\n"
-"Last-Translator: Dmytro Koval'ov <kov@tokyo.email.ne.jp>\n"
-"Language-Team: Ukrainian\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=koi8-u\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "óËÏÎƦ­ÕÒÕ×ÁÔÉ ×Ó¦ ÍÏΦÔÏÒÉ ÎÅÚÁÌÅÖÎÏ"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ ÒÏÚÛÉÒÅÎÎÑÍ Xinerama"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "îÁÓÔÒϧÔÉ Ô¦ÌØËÉ ÐÌÁÔÕ \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ Ú Ë¦ÌØËÏÍÁ ÍÏΦÔÏÒÁÍÉ"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"÷ÁÛÁ ÓÉÓÔÅÍÁ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú Ë¦ÌØËÏÍÁ ÍÏΦÔÏÒÁÍÉ.\n"
-"ýÏ ×É ÈÏÞÅÔÅ ÎÁÓÔÒϧÔÉ?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "÷¦ÄÅÏ ÐÌÁÔÁ"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "÷ÉÂÅÒ¦ÔØ ÇÒÁƦÞÎÕ ÐÌÁÔÕ"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "÷ÉÂÅÒ¦ÔØ X ÓÅÒ×ÅÒ"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X ÓÅÒ×ÅÒ"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree86 %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "ñËÕ ËÏÎƦÇÕÒÁæÀ XFree ×É ÈÏÞÅÔÅ ÍÁÔÉ?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"÷ÁÛÁ צÄÅÏÐÌÁÔÁ ÍÏÖÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÁÐÁÒÁÔÎÉÍ ÐÒÉÓËÏÒÅÎÎÑÍ\n"
-"ÔÒØÏÈ×ÉͦÒÎϧ ÇÒÁƦËÉ ÁÌÅ Ô¦ÌØËÉ Ú ÓÅÒ×ÅÒÏÍ XFree %s. ÷ÁÛÁ צÄÅÏÐÌÁÔÁ\n"
-"ЦÄÔÒÉÍÕ¤ÔØÓÑ ÓÅÒ×ÅÒÏÍ XFree %s, Õ ÑËÏÍÕ ×É ÍÏÖÌÉ×Ï ÍÁÔÉÍÅÔÅ ËÒÁÝÉÊ\n"
-"ÓÕÐÒÏ×¦Ä ÄÌÑ Ä×ÏÈ×ÉͦÒÎϧ ÇÒÁƦËÉ."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"÷ÁÛÁ צÄÅÏÐÌÁÔÁ ÍÏÖÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÁÐÁÒÁÔÎÉÍ 3D ÐÒÉÓËÏÒÅÎÎÑÍ ÇÒÁƦËÉ\n"
-"ÁÌÅ Ô¦ÌØËÉ Ú ÓÅÒ×ÅÒÏÍ XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s Ú ÁÐÁÒÁÔÎÉÍ ÐÒÉÓËÏÒÅÎÎÑÍ ÔÒØÏÈ×ÉͦÒÎϧ ÇÒÁƦËÉ"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"ãÑ ×¦ÄÅÏÐÌÁÔÁ ÍÁ¤ ЦÄÔÒÉÍËÕ ÁÐÁÒÁÔÎÏÇÏ ÐÒÉÓËÏÒÅÎÎÑ ÔÒØÏÈ×ÉͦÒÎϧ\n"
-"ÇÒÁƦËÉ, ÁÌÅ Ô¦ÌØËÉ ÄÌÑ XFree %s, ÷¶äí¶ôøôå, ýï ãå åëóðåòéíåîôáìøîéê\n"
-"òåöéí, ñëéê íïöå ðòé÷åóôé äï úá÷éóáîîñ ÷áûïçï ëïíð'àôåòá."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-"XFree %s Ú åëóðåòéíåîôáìøîïà ЦÄÔÒÉÍËÏÀ ÁÐÁÒÁÔÎÏÇÏ ÐÒÉÓËÏÒÅÎÎÑ ÔÒØÏÈ×ÉͦÒÎϧ "
-"ÇÒÁƦËÉ"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"ãÑ ×¦ÄÅÏÐÌÁÔÁ ÍÁ¤ ЦÄÔÒÉÍËÕ ÁÐÁÒÁÔÎÏÇÏ ÐÒÉÓËÏÒÅÎÎÑ ÔÒØÏÈ×ÉͦÒÎϧ\n"
-"ÇÒÁƦËÉ, ÁÌÅ Ô¦ÌØËÉ ÄÌÑ XFree %s, ÷¶äí¶ôøôå, ýï ãå åëóðåòéíåîôáìøîéê\n"
-"òåöéí, ñëéê íïöå ðòé÷åóôé äï úá÷éóáîîñ ÷áûïçï ëïíð'àôåòá. ÷ÁÛÁ ÐÌÁÔÁ\n"
-"ЦÄÔÒÉÍÕ¤ÔØÓÑ XFree %s, ÑËÉÊ ÍÁ¤ ËÒÁÝÕ Ð¦ÄÔÒÉÍËÕ Ä×Ï×ÉͦÒÎϧ ÇÒÁƦËÉ."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (ÄÒÁÊ×ÅÒ ÄÉÓÐÌÅÑ ÄÌÑ ÕÓÔÁÎÏ×ËÉ)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ XFree"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "÷ÉÂÅÒ¦ÔØ ÒÏÚÍ¦Ò ÐÁÍ'ÑÔ¦ ÷ÁÛϧ ÇÒÁƦÞÎϧ ÐÌÁÔÉ"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁÒÁÍÅÔÒÉ ÄÌÑ ÓÅÒ×ÅÒÁ"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "÷ÉÂÅÒ¦ÔØ ÔÉÐ ÍÏΦÔÏÒÕ"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "íÏΦÔÏÒ"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"ä×Á ÄÕÖÅ ×ÁÖÌÉ×ÉÈ ÐÁÒÁÍÅÔÒÉ - ÃÅ ÞÁÓÔÏÔÁ ×ÅÒÔÉËÁÌØÎϧ ÒÏÚÇÏÒÔËÉ\n"
-"(ÔÏÂÔÏ - ÞÁÓÔÏÔÁ, Ú ÑËÏÀ ÏÂÎÏ×ÌÀ¤ÔØÓÑ ÚÏÂÒÁÖÅÎÎÑ ÎÁ ÅËÒÁΦ), ÔÁ\n"
-"ÎÁʦÌØÛ ×ÁÖÌÉ×Ï - ÞÁÓÔÏÔÁ ÇÏÒÉÚÏÎÔÁÌØÎϧ ÓÉÎÈÒÏΦÚÁæ§ (ÔÏÂÔÏ - ÔÁ\n"
-"ÞÁÓÔÏÔÁ, Ú ÑËÏÀ ÎÁ ÅËÒÁΦ ÍÁÌÀÀÔØÓÑ ÇÏÒÉÚÏÎÔÁÌØΦ ÒÑÄËÉ).\n"
-"\n"
-"äõöå ÷áöìé÷ï ðáí'ñôáôé, ÝÏ ×É ÐÏ×ÉÎΦ ×ÉÂÒÁÔÉ ÔÁËÉÊ ÍÏΦÔÏÒ, ÐÁÒÁÍÅÔÒÉ\n"
-"ÑËÏÇÏ ÎÅ ÐÅÒÅ×ÉÝÕÀÔØ ÓÐÒÁ×ÖÎ¦È ÐÁÒÁÍÅÔÒ¦× ÷ÁÛÏÇÏ ÍÏΦÔÏÒÁ: ¦ÎÁËÛÅ ÷É\n"
-"ÍÏÖÅÔÅ ÐÒÉÞÉÎÉÔÉ ÎÅÐÏÐÒÁ×ÎÕ ÛËÏÄÕ Ó×ϤÍÕ ÍÏΦÔÏÒÕ. \n"
-"ñËÝÏ ×É ÍÁ¤ÔÅ ÓÕÍΦ×É ÝÏÄÏ ÈÁÒÁËÔÅÒÉÓÔÉË Ó×ÏÇÏ ÍÏΦÔÏÒÁ ×ÉÂÅÒ¦ÔØ ÐÅ×ÎÏ\n"
-"ǦÒÛÉÊ ÍÏΦÔÏÒ."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "þÁÓÔÏÔÁ ÇÏÒÉÚÏÎÔÁÌØÎϧ ÒÏÚÇÏÒÔËÉ"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "þÁÓÔÏÔÁ ×ÅÒÔÉËÁÌØÎϧ ÒÏÚÇÏÒÔËÉ"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "íÏΦÔÏÒ ÎÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÉÊ"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "÷¦ÄÅÏ ÐÌÁÔÁ ÝÅ ÎÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÁ"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "×É ÝÅ ÎÅ ×ÉÂÒÁÌÉ ÒÏÚĦÌØÎÕ ÚÄÁÔΦÓÔØ"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "þÉ ×É ÈÏÞÅÔÅ ×ÉÐÒÏÂÕ×ÁÔÉ ÎÏ×Õ ËÏÎƦ­ÕÒÁæÀ?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"õ×ÁÇÁ!  ôÅÓÔÕ×ÁÎÎÑ Ã¦¤§ ÇÒÁƦÞÎϧ ÐÌÁÔÉ ÍÏÖÅ ÐÒÉÚ×ÅÓÔÉ ÄÏ ÚÁ×ÉÓÁÎÎÑ\n"
-"÷ÁÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ."
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "ôÅÓÔÕ×ÁÎÎÑ ËÏÎƦ­ÕÒÁæ§"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"ÐÏÐÒÏÂÕÊÔÅ ÚͦÎÉÔÉ ÄÅÑ˦ ÈÁÒÁËÔÅÒÉÓÔÉËÉ"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "óÔÁÌÁÓÑ ÐÏÍÉÌËÁ:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "÷ÉÈÏÄÖÕ ÞÅÒÅÚ %d ÓÅËÕÎÄ"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "ãŠצÒΦ ÕÓÔÁÎÏ×ËÉ?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "óÔÁÌÁÓÑ ÐÏÍÉÌËÁ, ÐÏÐÒÏÂÕÊÔÅ ÚͦÎÉÔÉ ÄÅÑ˦ ÈÁÒÁËÔÅÒÉÓÔÉËÉ"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "òÏÚĦÌØÎÁ ÚÄÁÔΦÓÔØ"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "÷ÉÂÅÒ¦ÔØ ÒÏÚĦÌØÎÕ ÚÄÁÔΦÓÔØ ÔÁ ˦ÌØ˦ÓÔØ ËÏÌØÏÒ¦×"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "÷¦ÄÅÏ ÐÌÁÔÁ: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "óÅÒ×ÅÒ XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "åËÓÐÅÒÔÎÉÊ ÒÅÖÉÍ"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "ðÏËÁÚÁÔÉ ×ÓÅ"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "òÏÚĦÌØΦ ÚÄÁÔÎÏÓÔ¦"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "òÏÚËÌÁÄËÁ ËÌÁצÁÔÕÒÉ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "ôÉÐ ÍÉÛ¦: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "óÐÅæÁÌØÎÉÊ ÐÒÉÓÔÒ¦Ê ÍÉÛ¦: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "íÏΦÔÏÒ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "çÏÒÉÚÏÎÔÁÌØÎÁ ÓÉÎÈÒÏΦÚÁÃ¦Ñ ÍÏΦÔÏÒÁ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "þÁÓÔÏÔÁ ×ÅÒÔÉËÁÌØÎϧ ÒÏÚÇÏÒÔËÉ ÍÏΦÔÏÒÁ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "÷¦ÄÅÏ ÐÌÁÔÁ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "÷¦ÄÅÏ ÐÌÁÔÁ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "÷¦ÄÅÏ ÐÁÍ'ѦÔØ: %sËÂ\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "çÌÉÂÉÎÁ ËÏÌØÏÒÕ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "òÏÚĦÌØÎÁ ÚÄÁÔΦÓÔØ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "X ÓÅÒ×ÅÒ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ÄÒÁÊ×ÅÒ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "ð¦ÄÇÏÔÏ×ËÁ ËÏÎƦÇÕÒÁæ§ X-Window"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "ñË ×É ÈÏÞÅÔÅ ÎÁÓÔϧÔÉ Ó×ÏÀ ÓÉÓÔÅÍÕ"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "úͦΦÔØ ÍÏΦÔÏÒ"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "úͦΦÔØ ×¦ÄÅÏ ÐÌÁÔÕ"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "úͦΦÔØ ÐÁÒÁÍÅÔÒÉ ÓÅÒ×ÅÒÁ"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "úͦΦÔØ ÒÏÚĦÌØÎÕ ÚÄÁÔΦÓÔØ"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "ðÏËÁÚ ¦ÎÆÏÒÍÁæ§"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "ýÅ ÏÄÉÎ ÔÅÓÔ"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "÷ÉȦÄ"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"úÂÅÒÅÇÔÉ ÚͦÎÉ?\n"
-"¶ÓÎÕÀÞÁ ËÏÎƦÇÕÒÁæÑ:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "úÁÒŤÓÔÒÕÊÔÅÓÑ, ÂÕÄØ-ÌÁÓËÁ, ÝÅ ÒÁÚ Õ %s ÝÏ ÐÒÉ×ÅÓÔÉ Õ Ä¦À ÚͦÎÉ"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"âÕÄØ-ÌÁÓËÁ, ×ÉÊĦÔØ ¦Ú ÓÉÓÔÅÍÉ ¦ ÐÏÔ¦Í ÓËÏÒÉÓÔÕÊÔÅÓÑ Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "óÔÁÒÔÕ×ÁÔÉ X Á×ÔÏÍÁÔÉÞÎÏ"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"ñ ÍÏÖÕ ÎÁÓÔÒϧÔÉ ÷ÁÛÕ ÓÉÓÔÅÍÕ ÔÁË, ÝÏ X ÂÕÄÅ ÓÔÁÒÔÕ×ÁÔÉ Á×ÔÏÍÁÔÉÞÎÏ\n"
-"ЦÓÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ.\n"
-"þÉ ×É ÈÏÞÅÔÅ, ÝÏ X ÓÔÁÒÔÕ×Á× Á×ÔÏÍÁÔÉÞÎÏ?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "265 ËÏÌØÏÒ¦× (8 ¦Ô)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ÔÉÓÑÞ¦ ËÏÌØÏÒ¦× (15 ¦Ô)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ÔÉÓÑÞ ËÏÌØÏÒ¦× (16 ¦Ô)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 ͦÌØÊÏÎ¦× ËÏÌØÏÒ¦× (24 ¦Ô)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 ͦÌØÊÑÒÄÉ ËÏÌØÏÒ¦× (32 ¦Ô)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 ËÂ"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 ËÂ"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 íÂ"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 íÂ"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 íÂ"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 íÂ"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 íÂ"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 íÂ"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 í ÞÉ Â¦ÌØÛÅ"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "óÔÁÎÄÁÒÔÎÉÊ VGA, 640x480 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr " óÕÐÅÒ VGA, 640x480 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr ""
-"óÕͦÓÎÉÊ Ú 8514, 1024x768 at 87 Hz ÞÅÒÅÚÓÔÒÏÞÎÁ ÒÏÚÇÏÒÔËÁ (ÂÅÚ 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "óÕÐÅÒ VGA, 1024x768 at 87 Hz ÞÅÒÅÚÓÔÒÏÞÎÁ ÒÏÚÇÏÒÔËÁ, 800x600 at 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "òÏÚÛÉÒÅÎÉÊ óÕÐÅÒ VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA ÂÅÚ ÞÅÒÅÚÓÔÒÏÞÎϧ ÒÏÚÇÏÒÔËÉ , 1024x768 at 60 Hz, 800x600 at 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "÷ÉÓÏËÏÞÁÓÔÏÔÎÉÊ SVGA, 1024x768 at 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr ""
-"¶Ú ÚͦÎÎÏÀ ÞÁÓÔÏÔÏÀ, ÑËÉÊ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú ÒÅÖÉÍÁÍÉ ÄÏ 1280x1024 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr ""
-"¶Ú ÚͦÎÎÏÀ ÞÁÓÔÏÔÏÀ, ÑËÉÊ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú ÒÅÖÉÍÁÍÉ ÄÏ 1280x1024 at 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr ""
-"¶Ú ÚͦÎÎÏÀ ÞÁÓÔÏÔÏÀ, ÑËÉÊ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú ÒÅÖÉÍÁÍÉ ÄÏ 1280x1024 at 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "íÏΦÔÏÒ, ÝÏ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú ÒÅÖÉÍÁÍÉ ÄÏ 1600x1200 at 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "íÏΦÔÏÒ, ÝÏ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú ÒÅÖÉÍÁÍÉ ÄÏ 1600x1200 at 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "ðÅÒÛÉÊ ÓÅËÔÏÒ ÓÉÓÔÅÍÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ (boot partition)"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "ðÅÒÛÉÊ ÓÅËÔÏÒ ÄÉÓËÕ (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "õÓÔÁÎÏ×ËÁ SILO"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "äÅ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÓÔÁÒÔÏ×ÉÊ ÂÌÏË?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "õÓÔÁÎÏ×ËÁ LILO/grub"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO Ú ÔÅËÓÔÏ×ÉÍ ÍÅÎÀ"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO Ú ÇÒÁƦÞÎÉÍ ÍÅÎÀ"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "úÁ×ÁÎÔÁÖÕ×ÁÔÉÓÑ Ú DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaoot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "ïÓÎÏ×Φ ÏÐæ§ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÚÁ×ÁÎÔÁÖÕ×ÁÞ"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "õÓÔÁÎÏ×ËÁ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "ðÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ÎÅ ÐÒÁÃÀ¤ ¦Ú ÓÔÁÒÉÍÉ BIOS'ÁÍÉ)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "ëÏÍÐÁËÔÎÉÊ"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "ËÏÍÐÁËÔÎÉÊ"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "÷¦ÄÅÏ ÒÅÖÉÍ"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "ðÁÕÚÁ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ ÏÓÎÏ×Îϧ ÓÉÓÔÅÍÉ"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "ðÁÒÏÌØ"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "ðÁÒÏÌØ (ÝÅ ÒÁÚ)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "ïÂÍÅÖÉÔÉ ÏÐæ§ ËÏÍÁÎÄÎÏÇÏ ÒÑÄËÁ"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "ÏÂÍÅÖÉÔÉ"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "ïÞÉÝÁÔÉ /tmp ÐÒÉ ËÏÖÎÏÍÕ ÐÅÒÅ×ÁÎÔÁÖÅÎΦ"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "ôÏÞÎÉÊ ÏÂ'¤Í ÐÁÍ'ÑÔ¦ (RAM). úÎÁÊÄÅÎÏ %d íÂ"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "äÏÚ×ÏÌÉÔÉ ÂÁÇÁÔÏÐÒÏƦÌØΦÓÔØ"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "äÁ×ÁÔÉ ÒÏÚÍ¦Ò ÐÁÍ'ÑÔ¦ × íÂ"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "ïÐÃ¦Ñ ``ïÂÍÅÖÉÔÉ ÏÐæ§ ËÏÍÁÎÄÎÏÇÏ ÒÑÄËÁ'' ÎÅ ÍÁ¤ ÓÅÎÓÕ ÂÅÚ ÐÁÒÏÌÑ"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "âÕÄØ-ÌÁÓËÁ, ÓÐÒÏÂÕÊÔÅ ÝÅ ÒÁÚ"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "ðÁÒÏ̦ Ò¦ÚΦ"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "ðÏצÄÏÍÌÅÎÎÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "úÁÔÒÉÍËÁ Open Firmware"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "úÁÔÒÉÍËÁ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÑÄÒÁ"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "äÏÚ×ÏÌÉÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ Ú ËÏÍÐÁËÔ-ÄÉÓËÕ?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "äÏÚ×ÏÌÉÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ OF?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "ïÓÎÏ×ÎÁ ÓÉÓÔÅÍÁ?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"ôÕÔ ÎÁ×ÅÄÅΦ Ò¦ÚÎÏÍÁΦÔΦ ÐÕÎËÔÉ.\n"
-"×É ÍÏÖÅÔÅ ÁÂÏ ÄÏÄÁÔÉ ÝÅ ÄÅÑ˦, ÁÂÏ ÚͦÎÉÔÉ Ô¦, ÝÏ ×ÖÅ ¦ÓÎÕÀÔØ."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "äÏÄÁÔÉ"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "úÁ˦ÎÞÅÎÏ"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "úͦÎÉÔÉ"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "ñËÉÊ ÔÉÐ ×É ÈÏÞÅÔÅ ÄÏÄÁÔÉ?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "ì¦ÎÁËÓ"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "¶ÎÛ¦ ÓÉÓÔÅÍÉ (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "¶ÎÛ¦ ÓÉÓÔÅÍÉ (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "¶ÎÛ¦ ÓÉÓÔÅÍÉ (windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "ïÂÒÁÚ"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "ðÒɤÄÎÁÔÉ"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "úÁÐÉÓ/ÞÉÔÁÎÎÑ"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "ôÁÂÌÉÃÑ"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "îÅÂÅÚÐÅÞÎÏ"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "åÔÉËÅÔËÁ"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "ïÓÎÏ×ÎÁ"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "òÏÚÍ¦Ò Initrd"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "âÅÚ÷¦ÄÅÏ"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "óÔÅÒÔÉ ÐÕÎËÔ"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "îÅ ÄÏÚ×ÏÌÑÀÔØÓÑ ÐÕÓÔ¦ ÅÔÉËÅÔËÉ"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "ãÑ ÅÔÉËÅÔËÁ ×ÖÅ ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "úÎÁÊÄÅΦ ¦ÎÔÅÒÆÅÊÓÉ %s %s"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "þÉ ×É ÍÁ¤ÔÅ ¦ÎÛ¦?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "þÉ ×É ÍÁ¤ÔÅ ÂÕÄØ-Ñ˦ %s ¦ÎÔÅÒÆÅÊÓÉ?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "î¦"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "ôÁË"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "ðÅÒÅÇÌÑÎØÔÅ ¦ÎÆÏÒÍÁæÀ ÐÒÏ ÁÐÁÒÁÔÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "÷ÓÔÁÎÏ×ÌÀÀ ÄÒÁÊ×ÅÒ ÄÌÑ %s ÐÌÁÔÉ %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(ÍÏÄÕÌØ %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "ñËÉÊ ÄÒÁÊ×ÅÒ %s ÍÅΦ ÓÐÒÏÂÕ×ÁÔÉ?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"÷ ÄÅÑËÉÈ ×ÉÐÁÄËÁÈ ÄÒÁÊ×ÅÒ %s ×ÉÍÁÇÁ¤ ÄÏÄÁÔËÏ×ϧ ¦ÎÆÏÒÍÁæ§ ÄÌÑ ÔÏÇÏ,\n"
-"ÝÏ צÒÎÏ ÐÒÁÃÀ×ÁÔÉ, ÈÏÞÁ Ú×ÉÞÁÊÎÏ ÐÒÁÃÀ¤ ÎÏÒÍÁÌØÎÏ ÂÅÚ Îŧ. þÉ ÎÅ\n"
-"ÈÏÔ¦ÌÉ Â ×É ×ËÁÚÁÔÉ ÄÏÄÁÔËÏצ ÏÐæ§ ÄÌÑ ÎØÏÇÏ ÞÉ ÄÏÚ×ÏÌÉÔÉ ÄÒÁÊ×ÅÒÕ\n"
-"×ÉÐÒÏÂÕ×ÁÔÉ ÷ÁÛÕ ÓÉÓÔÅÍÕ, ÝÏ ÚÎÁÊÔÉ ÐÏÔÒ¦ÂÎÕ ¦ÎÆÏÒÍÁæÀ? ¶ÎËÏÌÉ ÔÁËÅ\n"
-"×ÉÐÒÏÂÏ×Õ×ÁÎÎÑ ÍÏÖÅ ÐÒÉ×ÅÓÔÉ ÄÏ ÚÁ×ÉÓÁÎÎÑ ËÏÍÐ'ÀÔÅÒÁ, ÁÌÅ ÎÅ ÐÏ×ÉÎÎÏ\n"
-"ΦÑË ÚÁÛËÏÄÉÔÉ ÊÏÍÕ."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "á×ÔÏÔÅÓÔ"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "÷ËÁÖ¦ÔØ ÏÐæ§"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "ôÅÐÅÒ ×É ÍÏÖÅÔÅ ÎÁÄÁÔÉ ÊÏÇÏ ÏÐæ§ ÄÌÑ ÍÏÄÕÌÑ %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"×É ÍÏÖÅÔÅ ÔÅÐÅÒ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÊÏÇÏ ÏÐæ§ × ÍÏÄÕ̦ %s.\n"
-"ïÐæ§ ÍÁÀÔØ ÆÏÒÍÁÔ ``ÎÁÚ×Á=×ÅÌÉÞÉÎÁ ÎÁÚ×Á2=×ÅÌÉÞÉÎÁ2 ...''.\n"
-"îÁÐÒÉËÌÁÄ, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "ïÐæ§ ÍÏÄÕÌÑ:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"úÁ×ÁÎÔÁÖÅÎÎÑ ÍÏÄÕÌÑ %s ÎÅÕÓЦÛÎÅ.\n"
-"èÏÞÅÔÅ ÓÐÒÏÂÕ×ÁÔÉ ¦ÎÛ¦ ÐÁÒÁÍÅÔÒÉ?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(×ÖÅ ÓÔ×ÏÒÅÎÉÊ %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "ðÁÒÏÌØ ÚÁÎÁÄÔÏ ÐÒÏÓÔÉÊ"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "äÁÊÔÅ, ÂÕÄØ-ÌÁÓËÁ, ¦Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ ÐÏ×ÉÎÎÏ ÓËÌÁÄÁÔÉÓÑ Ô¦ÌØËÉ Ú ÍÁÌÉÈ ÌÁÔÉÎÓØËÉÈ Ì¦ÔÅÒ,\n"
-"ÞÉÓÅÌ, `-' ÔÁ `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "ãÅ ¦Í'Ñ ×ÖÅ ÚÁÊÎÑÔÅ"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"÷×ÅĦÔØ ËÏÒÉÓÔÕ×ÁÞÁ\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "ðÒÉÊÎÑÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "ðÏ×ÎÅ ¦Í'Ñ"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "ëÏÍÁÎÄÎÁ ÏÂÏÌÏÎËÁ"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "ð¦ËÔÏÇÒÁÍÁ"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "á×ÔÏÒŤÓÔÒÁæÑ"
-
-#: ../../any.pm_.c:757
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"ñ ÍÏÖÕ ÎÁÓÔÒϧÔÉ ÷ÁÛÕ ÓÉÓÔÅÍÕ ÔÁË, ÝÏ X ÂÕÄÅ ÓÔÁÒÔÕ×ÁÔÉ Á×ÔÏÍÁÔÉÞÎÏ\n"
-"ЦÓÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ.\n"
-"þÉ ×É ÂÁÖÁ¤ÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ Ã¦¤À ÍÏÖÌÉצÓÔÀ?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "÷ÉÂÅÒ¦ÔØ ÓÔÁÎÄÁÒÔÎÏÇÏ ËÏÒÉÓÔÕ×ÁÞÁ:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "÷ÉÂÅÒ¦ÔØ ÍÅÎÅÄÖÅÒ ×¦ËÏÎ, ÑËÉÍ ×É ÈÏÞÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÍÏ×Õ."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÔÁËÏÖ ¦ÎÛ¦ ÍÏ×É, Ñ˦ ÂÕÄÕÔØ ÄÏÓÔÕÐΦ × ÓÉÓÔÅͦ ЦÓÌÑ\n"
-"ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "÷ÓÅ"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Laskavo prosymo do %s - peremykacha operaciynih system!\n"
-"\n"
-"Vyberit' odnu z operaciynikh system v spysku abo pochekajte %d sekund\n"
-"poki pochne vantazhytysja persha z inh.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Laskavo prosymo do prohramy vyboru operacijnoyi systemy GRUB!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Dlja vyboru pidsvichenogo punktu korystujtesja klavishamy %c ta %c."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Natysnit' enter shchob zavantazhyty vibranu systemu, 'e' shchob redaguvaty"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-"komandy pered zavantazhennjam, ta 'c' dlja perehodu v komandnyj rezhim."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Pidsvichena systema zavantazhyt'sja avtomatichno cherez %d sekund."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "ÎÅÄÏÓÔÁÔÎØÏ Í¦ÓÃÑ × /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "òÏÂÏÞÉÊ ÓÔ¦Ì"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "óÔÁÒÔÏ×Å ÍÅÎÀ"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "äÅ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÓÔÁÒÔÏ×ÉÊ ÂÌÏË?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ЦÄËÁÚËÁ ÝÅ ÎÅ ÚÒÏÂÌÅÎÁ.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÓÔÉÌÀ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_æÁÊÌ"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/æÁÊÌ/_÷ÉȦÄ"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "ëÁÔÅÇÏÒ¦Ñ ÍÏΦÔÏÒÁ ÎÏ×ÏÇÏ ÓÔÉÌÀ"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "íÏΦÔÏÒ ÎÏ×ÏÇÏ ÔÉÐÕ"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "ú×ÉÞÁÊÎÉÊ ÍÏΦÔÏÒ"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "ôÒÁÄÉæÊÎÉÊ ÍÏΦÔÏÒ Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "÷ÍÉËÁÔÉ á×ÒÏÒÕ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "òÅÖÉÍ Lilo/grub"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"×É ËÏÒÉÓÔÕ¤ÔÅÓØ ÚÁ×ÁÎÔÁÖÕ×ÁÞÅÍ ÓÉÓÔÅÍ %s.\n"
-"ëÌÁÃΦÔØ ÎÁ \"îÁÓÔÒϧÔÉ\" ÝÏ ÓÔÁÒÔÕ×ÁÔÉ ÐÏͦÞÎÉË ÕÓÔÁÎÏ×ËÉ."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "îÁÓÔÒϧÔÉ"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "òÅÖÉÍ ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "óÉÓÔÅÍÎÉÊ ÒÅÖÉÍ"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "úÁÐÕÓËÁÔÉ ×¦ËÎÏ X-Window ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "î¦, ÍÅΦ ÎÅ ÐÏÔÒ¦ÂÎÁ Á×ÔÏÍÁÔÉÞÎÁ ÒŤÓÔÒÁæÑ"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"ôÁË, Ñ ÈÏÞÕ Á×ÔÏÍÁÔÉÞÎÏ ÒŤÓÔÒÕ×ÁÔÉÓÑ × ÓÉÓÔÅͦ Ú ÃÉÍ (¦ÍÅÎÅÍ, ÓÅÒÅÄÏ×ÉÝÅÍ)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "çÁÒÁÚÄ"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "÷¦ÄͦÎÉÔÉ"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ÎÅ ÍÏÖÕ ×¦ÄËÒÉÔÉ /etc/inittab ÎÁ ÐÒÏÞÉÔÁÎÎÑ: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "õÓÔÁÎÏ×ËÁ LILO ÎÅÕÓЦÛÎÁ. óÔÁÌÁÓÑ ÐÏÍÉÌËÁ:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "½Â"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "ËÂ"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "íÂ"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "ôÂ"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d È×ÉÌÉÎ"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 È×ÉÌÉÎÁ"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d ÓÅËÕÎÄ"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "âÕÄØ-ÌÁÓËÁ, ÓÔ×ÏÒ¦ÔØ ÓÐÏÞÁÔËÕ ÒÅÚÅÒÎÕ ËÏЦÀ ÷ÁÛÉÈ ÄÁÎÉÈ"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "þÉÔÁÊÔÅ Õ×ÁÖÎÏ!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"ñËÝÏ ×É ÚÂÉÒÁ¤ÔÅÓØ ËÏÒÉÓÔÕ×ÁÔÉÓÑ aboot, ÎÅ ÚÁÂÕÄØÔÅ ÚÁÌÉÛÉÔÉ ×¦ÌØÎÉÊ\n"
-"ÒÏÚÄ¦Ì (ÄÏÓÔÁÔÎØÏ 2048 ÓÅËÔÏÒ¦×) ÎÁ ÐÏÞÁÔËÕ ÄÉÓËÕ"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "ðÏÍÉÌËÁ"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "ðÏͦÞÎÉË"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "îÏ×ÉÊ"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "÷¦ÄÄÁÌÅÎÉÊ"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "ôÏÞËÁ ÍÏÎÔÕ×ÁÎÎÑ"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "ðÁÒÁÍÅÔÒÉ"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "ôÉÐ"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "òÏÚÍÏÎÔÕ×ÁÔÉ"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "íÏÎÔÕ×ÁÔÉ"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "÷ÉÂÅÒ¦ÔØ Ä¦À"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"×É ÍÁ¤ÔÅ ÏÄÉÎ ×ÅÌÉËÉÊ ÄÉÓËÏ×ÉÊ \n"
-"ЦÄÒÏÚÄ¦Ì ÔÉÐÕ FAT (ÑËÉÊ × ÏÓÎÏ×ÎÏÍÕ\n"
-"×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÓÉÓÔÅÍÁÍÉ MicroSoft \n"
-"Dos/Windows).  òÅËÏÍÅÎÄÏ×ÁÎÏ ÓÐÅÒÛÕ \n"
-"ÚÍÅÎÛÉÔÉ ÒÏÚÍ¦Ò ÃØÏÇÏ ÒÏÚĦÌÕ (ËÌÁÃΦÔØ \n"
-"ÎÁ ÎØÏÍÕ, ¦ ÐÏÔ¦Í ËÌÁÃΦÔØ ÎÁ \"úͦÎÉÔÉ ÒÏÚͦÒ\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "ðÏÄÒÏÂÉæ"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Journalised FS"
-msgstr "öÕÒÎÁÌØÎÁ ÆÁÊÌÏ×Á ÓÉÓÔÅÍÁ"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "ðÕÓÔÏ"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "¶ÎÛ¦"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "ôÉÐÉ ÆÁÊÌÏ×ÉÈ ÓÉÓÔÅÍ:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "óÔ×ÏÒÉÔÉ"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "úÁͦÓÔØ ÃØÏÇÏ ÓËÏÒÉÓÔÁÊÔÅÓÑ ``%s''"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "óÔÅÒÔÉ"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "óÐÏÞÁÔËÕ ÓËÏÒÉÓÔÕÊÔÅÓÑ ``òÏÚÍÏÎÔÕ×ÁÔÉ''"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"ð¦ÓÌÑ ÚͦÎÉ ÔÉÐÕ Ð¦ÄÒÏÚĦÌÕ ÄÉÓËÕ %s, ×Ó¦ ÄÁΦ ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦ \n"
-"ÂÕÄÕÔØ ×ÔÒÁÞÅΦ"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "äÅ ×É ÈÏÞÅÔÅ ÚÍÏÎÔÕ×ÁÔÉ ÐÒÉÓÔÒ¦Ê %s?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "ðÁÒÁÍÅÔÒÉ ÍÏÎÔÕ×ÁÎÎÑ:"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "ò¦ÚÎÏÍÁΦÔÎÅ"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "úͦÎΦ ÎÏÓ¦§"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "úͦÎÉÔÉ ÔÉÐ"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "ñËÕ ÆÁÊÌÏ×Õ ÓÉÓÔÅÍÕ ×É ×ÉÂÉÒÁ¤ÔÅ?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "óËÁÎÕÀ ÄÏÓÔÕÐΦ ÒÅÓÕÒÓÉ NFS"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "óËÁÎÕÀ ÄÏÓÔÕÐΦ ÒÅÓÕÒÓÉ NFS ÎÁ ÓÅÒ×ÅÒ¦ %s"
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-"ñËÝÏ × ÎÁ×ÅÄÅÎÏÍÕ ×ÉÝÅ ÓÐÉÓËÕ ÎÅÍÁ¤ ÐÏÔÒ¦ÂÎÏÇÏ ÐÕÎËÔÕ, ××ÅĦÔØ ÊÏÇÏ ÔÕÔ:"
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "óÅÒ×ÅÒ"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "òÅÓÕÒÓÉ ÄÌÑ ÓЦÌØÎÏÇÏ ×ÉËÏÒÉÓÔÁÎÎÑ"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "óËÁÎÕÀ ÄÏÓÔÕÐΦ ÒÅÓÕÒÓÉ Samba"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "óËÁÎÕÀ ÄÏÓÔÕÐΦ ÒÅÓÕÒÓÉ Samba ÎÁ ÓÅÒ×ÅÒ¦ %s"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "÷ÉÂÅÒ¦ÔØ Ð¦ÄÒÏÚĦÌ"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "óÔ×ÏÒÉÔÉ ¦ÎÛÉÊ Ð¦ÄÒÏÚĦÌ"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "÷ÉȦÄ"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "ú×ÉÞÁÊÎÉÊ > åËÓÐÅÒÔ"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "åËÓÐÅÒÔ > ú×ÉÞÁÊÎÉÊ"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "îÁÚÁÄ"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "÷ÓÅ-ÔÁËÉ ÐÒÏÄÏ×ÖÕ×ÁÔÉ?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "÷ÉÊÔÉ ÂÅÚ ÚÁÐÉÓÕ"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "÷ÉÊÔÉ ÂÅÚ ÚÁÐÉÓÕ ÔÁÂÌÉæ ЦÄÒÏÚĦ̦×?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "þÉ ×É ÈÏÞÅÔÅ ÚÁÐÉÓÁÔÉ ËÏÎƦ­ÕÒÁæÀ /etc/fstab?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "á×ÔÏÍÁÔÉÞÎÏ ÒÏÚÐÏĦÌÉÔÉ"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "ïÞÉÓÔÉÔÉ ×ÓÅ"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "ýÅ"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "¶ÎÆÏÒÍÁÃ¦Ñ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "îÅÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ Á×ÔÏÍÁÔÉÞÎÏÇÏ ÐÏĦÌÕ"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "÷Ó¦ ÏÓÎÏ×Φ ЦÄÒÏÚĦÌÉ ÚÁÊÎÑÔ¦"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "îÅ ÍÏÖÕ ÄÏÄÁÔÉ ÖÏÄÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"ýÏ ÍÁÔÉ Â¦ÌØÛŠЦÄÒÏÚĦ̦×, Ú¦ÔÒ¦ÔØ ÏÄÉÎ ¦Ú ÔÉÈ, ÝÏ ¤. ð¦ÓÌÑ ÃØÏÇÏ\n"
-"×É ÍÏÖÅÔÅ ÓÔ×ÏÒÉÔÉ ÚÁͦÓÔØ ÎØÏÇÏ Ë¦ÌØËÁ ÒÏÚÛÉÒÅÎÉÈ Ð¦ÄÒÏÚĦ̦×"
-
-#: ../../diskdrake_interactive.pm_.c:285
-msgid "Save partition table"
-msgstr "úÁÐÉÓÁÔÉ  ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
-
-#: ../../diskdrake_interactive.pm_.c:286
-msgid "Restore partition table"
-msgstr "÷¦ÄÎÏ×ÉÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "á×ÁÒ¦ÊÎÁ ÔÁÂÌÉÃÑ Ð¦ÄÒÏÚĦ̦×"
-
-#: ../../diskdrake_interactive.pm_.c:289
-msgid "Reload partition table"
-msgstr "ðÒÏÞÉÔÁÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
-
-#: ../../diskdrake_interactive.pm_.c:293
-msgid "Removable media automounting"
-msgstr "á×ÔÏÍÁÔÉÞÎÅ ÍÏÎÔÕ×ÁÎÎÑ ÚͦÎÎÉÈ ÎÏÓ¦§×"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"á×ÁÒ¦ÊÎÁ ÔÁÂÌÉÃÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÍÁ¤ ¦ÎÛÉÊ ÒÏÚͦÒ\n"
-"ðÒÏÄÏ×ÖÕ×ÁÔÉ?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "ðÏÐÅÒÅÄÖÅÎÎÑ"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ × ÄÉÓËÏצÄ\n"
-"÷Ó¦ ÄÁΦ ÎÁ Ã¦Ê ÄÉÓËÅÔ¦ ÂÕÄÕÔØ ×ÔÒÁÞÅΦ"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "ðÒÏÂÕÀ צÄÎÏ×ÉÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "äÅÔÁÌØÎÁ ¦ÎÆÏÒÍÁæÑ"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "úͦÎÉÔÉ ÒÏÚͦÒ"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "ðÅÒÅͦÓÔÉÔÉ"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "æÏÒÍÁÔÕ×ÁÔÉ"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "áËÔÉ×ÎÁ"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "äÏÄÁÔÉ ÄÏ RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "äÏÄÁÔÉ ÄÏ LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "÷ÉÄÁÌÉÔÉ Ú RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "÷ÉÄÁÌÉÔÉ Ú LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "úͦÎÉÔÉ RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÄÌÑ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "óÔ×ÏÒÉÔÉ ÎÏ×ÉÊ ÒÏÚĦÌ"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "ðÏÞÁÔÏË (ÓÅËÔÏÒ): "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "òÏÚÍ¦Ò (íÂ): "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "ôÉРЦÄÒÏÚĦÌÕ: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "ôÏÞËÁ ÍÏÎÔÕ×ÁÎÎÑ: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "õÓÔÁÎÏ×ËÉ: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-msgid "Remove the loopback file?"
-msgstr "óÔÅÒÔÉÆÁÊÌÕ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ?"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "úͦÎÉÔÉ ÔÉРЦÄÒÏÚĦÌÕ"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "ðÅÒÅÍÉËÁÀÓØ Ú ext2 ÎÁ ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "äÅ ×É ÈÏÞÅÔÅ ÚÍÏÎÔÕ×ÁÔÉ ÆÁÊÌ Ú×ÏÒÏÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"îÅ ÍÏÖÕ ÚͦÎÉÔÉ ÔÏÞËÕ ÍÏÎÔÕ×ÁÎÎÑ ÄÁÎÏÇÏ ÒÏÚĦÌÕ, ÏÓ˦ÌØËÉ ×¦Î\n"
-"×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÄÌÑ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ. óÐÏÞÁÔËÕ ×¦ÄͦΦÔØ\n"
-"Ú×ÏÒÏÔΤ ÍÏÎÔÕ×ÁÎÎÑ."
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "ïÂÞÉÓÌÀÀ ÍÅÖ¦ ЦÄÒÏÚĦÌÕ FAT"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "úͦÎÀÀ ÒÏÚͦÒ"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "òÏÚÍ¦Ò ÃØÏÇÏ Ð¦ÄÒÏÚĦÌÕ ÎÅÍÏÖÌÉ×Ï ÚͦÎÉÔÉ"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "ðÏÔÒ¦ÂÎÏ ÚÂÅÒÅÇÔÉ ×Ó¦ ÄÁΦ ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"ð¦ÓÌÑ ÚͦÎÉ ÒÏÚͦÒÕ Ð¦ÄÒÏÚĦÌÕ %s, ×Ó¦ ÄÁΦ ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦ ÂÕÄÕÔØ\n"
-"×ÔÒÁÞÅΦ"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "÷ÉÂÅÒ¦ÔØ ÎÏ×ÉÊ ÒÏÚͦÒ"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "îÏ×ÉÊ ÒÏÚÍ¦Ò (íÂ): "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "îÁ ÑËÉÊ ÄÉÓË ×É ÈÏÞÅÔÅ ÐÅÒÅͦÓÔÉÔÉÓÑ?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "óÅËÔÏÒ"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "îÁ ÑËÉÊ ÓÅËÔÏÒ ÐÅÒÅͦÓÔÉÔÉÓÑ?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "ðÅÒÅͦÝÅÎÎÑ"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "ðÅÒÅͦÝÁÀ ЦÄÒÏÚĦÌ..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "÷ÉÂÅÒ¦ÔØ ¦ÓÎÕÀÞÉÊ RAID, ÄÏ ÑËÏÇÏ ÄÏÄÁÔÉ"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "ÎÏ×ÉÊ"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "÷ÉÂÅÒ¦ÔØ ¦ÓÎÕÀÞÉÊ LVM, ÄÏ ÑËÏÇÏ ÄÏÄÁÔÉ"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "îÁÚ×Á LVM?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "ãÅÊ Ð¦ÄÒÏÚÄ¦Ì ÎÅ ÍÏÖÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÄÌÑ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "ú×ÏÒÏÔΤ ÍÏÎÔÕ×ÁÎÎÑ"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "îÁÚ×Á ÆÁÊÌÕ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-msgid "Give a file name"
-msgstr "äÁÊÔÅ ÎÁÚ×Õ ÆÁÊÌÕ"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"¶ÎÛÉÊ ÐÒÉÓÔÒ¦Ê Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ ×ÖÅ ËÏÒÉÓÔÕ¤ÔØÓÑ ÃÉÍ\n"
-"ÆÁÊÌÏÍ. ÷ÉÂÅÒ¦ÔØ ¦ÎÛÉÊ."
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "æÁÊÌ ×ÖÅ ¦ÓÎÕ¤. ëÏÒÉÓÔÕ×ÁÔÉÓÑ ÎÉÍ?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "ÐÒÉÓÔÒ¦Ê"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "Ò¦×ÅÎØ"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "ÒÏÚÍ¦Ò Ä¦ÌÑÎËÉ"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "ïÂÅÒÅÖÎÏ: ÃÑ ÏÐÅÒÁÃ¦Ñ ÎÅÂÅÚÐÅÞÎÁ."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "ôÉРЦÄÒÏÚĦ̦×?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"ñ ÎÅ ÍÏÖÕ ÓÔ×ÏÒÉÔÉ /boot ÔÁË ×¦ÄÄÁÌÅÎÏ ÎÁ ÄÉÓËÕ (ÎÁ ÃÉ̦ÎÄÒ¦, ÎÏÍÅÒ\n"
-"ÑËÏÇÏ > 1024).\n"
-"áÂÏ ×É ÂÕÄÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ LILO ¦ צΠÎÅ ÂÕÄÅ ÐÒÁÃÀ×ÁÔÉ, ÁÂÏ ×É ÎÅ\n"
-"ÂÕÄÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ LILO, ÔÏĦ ÷ÁÍ ÎÅ ÐÏÔÒ¦ÂÎÁ ÄÉÒÅËÔÏÒ¦Ñ /boot"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"ð¦ÄÒÏÚĦÌ, ÑËÉÊ ×É ×ÉÂÒÁÌÉ ÝÏ ÄÏÄÁÔÉ ÑË ËÏÒÅÎÅ×ÉÊ Ð¦ÄÒÏÚÄ¦Ì (/)\n"
-"ƦÚÉÞÎÏ ÒÏÚÔÁÛÏ×ÁÎÉÊ ÐÏÚÁ 1024-Í ÃÉ̦ÎÄÒÏÍ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ.  ëÒ¦Í\n"
-"ÃØÏÇÏ ×É ÎÅ ÍÁ¤ÔÅ ×ÉĦÌÅÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ Ð¦Ä ÄÉÒÅËÔÏÒ¦À /boot.  ñËÝÏ ×É\n"
-"ÐÌÁÎÕ¤ÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ LILO, ÎÅ ÚÁÂÕÄØÔÅ ÄÏÄÁÔÉ Ð¦ÄÒÏÚÄ¦Ì ÄÌÑ /boot"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"÷ ÑËÏÓÔ¦ ЦÄÒÏÚĦÌÁ ÄÌÑ root (/) ×É ×ÉÂÒÁÌÉ ÐÒÏÇÒÁÍÎÉÊ RAID.\n"
-"úÁ×ÁÎÔÁÖÕ×ÁÞ¦ ÎÅ ÍÖÏÕÔØ ÐÒÁÃÀ×ÁÔÉ Ú ÔÁËÉÍÉ Ð¦ÄÒÏÚĦÌÁÍÉ ÂÅÚ Ð¦ÄÒÏÚĦÌÕ\n"
-"/boot. ôÏÖ, ÂÕÄØ-ÌÁÓËÁ, ÎÅ ÚÁÂÕÄØÔÅ ÄÏÄÁÔÉ Ð¦ÄÒÏÚÄ¦Ì /boot."
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "ôÁÂÌÉÃÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÄÉÓËÕ %s ÂÕÄÅ ÚÁÐÉÓÁÎÏ ÎÁ ÄÉÓË"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "ýÏ ÚͦÎÉ ÐÏÞÁÌÉ Ä¦ÑÔÉ ÷ÁÍ ÓÌ¦Ä ÐÅÒÅ×ÁÎÔÁÖÉÔÉ ËÏÍÐ'ÀÔÅÒ"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"ð¦ÓÌÑ ÆÏÒÍÁÔÕ×ÁÎÎÑ Ð¦ÄÒÏÚĦÌÕ %s, ×Ó¦ ÄÁΦ ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦ \n"
-"ÂÕÄÕÔØ ×ÔÒÁÞÅΦ"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "æÏÒÍÁÔÕ×ÁÎÎÑ"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "æÏÒÍÁÔÕ×ÁÎÎÑ ÆÁÊÌÕ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "æÏÒÍÁÔÕ×ÁÎÎÑ Ð¦ÄÒÏÚĦÌÕ %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "ÚÂ¦Ê Õ mkraid"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "îÅÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ ÎÏ×ÉÈ Ð¦ÄÒÏÚĦ̦×"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "îÅÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ ÎÏ×ÉÈ Ð¦ÄÒÏÚĦ̦×"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "÷ÉÄÁÌÅÎÎÑ LPD..."
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "ðÒÉÓÔÒ¦Ê: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "ì¦ÔÅÒÁ × äïó¦: %s (ÐÒÉÐÕÝÅÎÎÑ)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "ôÉÐ: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "îÁÚ×Á: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "ðÏÞÁÔÏË: ÓÅËÔÏÒ %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "òÏÚͦÒ: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ÓÅËÔÏÒ¦×"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "÷¦Ä ÃÉ̦ÎÄÒÕ %d ÄÏ ÃÉ̦ÎÄÒÕ %d \n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "æÏÒÍÁÔÏ×ÁÎÉÊ\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "îÅ ÆÏÒÍÁÔÏ×ÁÎÉÊ\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "úÍÏÎÔÏ×ÁÎÉÊ\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"æÁÊÌ(É) Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ: \n"
-"  %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"ð¦ÄÒÏÚĦÌ, ÑËÉÊ ÂÕÄÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ\n"
-"     (ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ äïóÕ, ÎÅ ÄÌÑ lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "ò¦×ÅÎØ %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "òÏÚÍ¦Ò Ä¦ÌÑÎËÉ %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "äÉÓËÉ RAID %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "îÁÚ×É ÆÁÊÌ¦× Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"íÏÖÌÉ×Ï ÃÅÊ Ð¦ÄÒÏÚÄ¦Ì ¤ ЦÄÒÏÚĦÌÏÍ\n"
-"ÄÒÁÊ×ÅÒÁ, ×ÁÍ ÍÁÂÕÔØ ÎÅ ÐÏÔÒ¦ÂÎÏ\n"
-"ÊÏÇÏ ÚͦÎÀ×ÁÔÉ.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"ãÅ ÓÐÅæÁÌØÎÉÊ Ð¦ÄÒÏÚÄ¦Ì ÄÌÑ \n"
-"ÍÏÖÌÉ×ÏÓÔ¦ ÐÏÄצÊÎÏÇÏ \n"
-"ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "òÏÚͦÒ: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "çÅÏÍÅÔÒ¦Ñ: %s ÃÉ̦ÎÄÒ¦×, %s ÇÏÌÏ×ÏË, %s ÓÅËÔÏÒ¦×\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "¶ÎÆÏÒÍÁæÑ: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "äÉÓËÉ LVM %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "ôÉÐ ÔÁÂÌÉæ ЦÄÒÏÚĦ̦×: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "ÎÁ ÛÉΦ %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "ðÁÒÁÍÅÔÒÉ: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ÆÏÒÍÁÔÕ×ÁÎÎÑ %s ×ÔÒÁÞÅÎÏ"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "îÅ ÚÎÁÀ ÑË ÆÏÒÍÁÔÕ×ÁÔÉ  %s ÔÉÐÕ  %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "ÐÏÍÉÌËÁ ÍÏÎÔÕ×ÁÎÎÑ"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fcsk ÚÁ˦ÎÞÉÌÁÓØ Ú ËÏÄÏÍ ÐÏÍÉÌËÉ %d ÞÉ ÓÉÇÎÁÌÏÍ %d "
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "ÐÏÍÉÌËÁ ÍÏÎÔÕ×ÁÎÎÑ: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "ÐÏÍÉÌËÁ ÒÏÚÍÏÎÔÕ×ÁÎÎÑ %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "ÐÒÏÓÔÉÊ"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "ÓÅÒ×ÅÒ"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "JFS ÎÅ ÍÏÖÎÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÎÁ ЦÄÒÏÚĦÌÁÈ ÒÏÚͦÒÏÍ ÍÅÎÛÅ 16íÂ."
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "ReiserFS ÎÅ ÍÏÖÎÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÎÁ ЦÄÒÏÚĦÌÁÈ ÒÏÚͦÒÏÍ ÍÅÎÛÅ 32íÂ."
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "ôÏÞËÁ ÍÏÎÔÕ×ÁÎÎÑ ÐÏ×ÉÎÎÁ ÐÏÞÉÎÁÔÉÓÑ Ú /"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "÷ÖÅ ¤ ЦÄÒÏÚÄ¦Ì Ú ÔÏÞËÏÀ ÍÏÎÔÕ×ÁÎÎÑ %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "äÌÑ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ %s ÎÅ ÍÏÖÎÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÌÏǦÞÎÉÍ ÔÏÍÏÍ LVM"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "ãÅÊ ËÁÔÁÌÏÇ ÍÁ¤ ÚÎÁÈÏÄÉÔÉÓØ ÎÁ ËÏÒÅÎÅ×¦Ê ÆÁÊÌÏ×¦Ê ÓÉÓÔÅͦ"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"äÌÑ Ã¦¤§ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ ÷ÁÍ ÐÏÔÒ¦ÂÎÁ ÓÐÒÁ×ÖÎÑ ÆÁÊÌÏ×Á ÓÉÓÔÅÍÁ (ext2,\n"
-"reiserfs)\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "îÅ ÍÏÖÕ ×¦ÄËÒÉÔÉ %s ÎÁ ÚÁÐÉÓ: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"óÔÁÌÁÓÑ ÐÏÍÉÌËÁ - ÎÅ ÚÎÁÊÄÅÎÏ ×¦ÄÐÏצÄÎÉÈ ÄÉÓË¦× ÄÌÑ ÓÔ×ÏÒÅÎÎÑ ÎÏ×ÉÈÆÁÊÌÏ×ÉÈ "
-"ÓÉÓÔÅÍ. ðÅÒÅצÒÔÅ ÂÕÄØ-ÌÁÓËÁ Ó×ÏÀ ÓÉÓÔÅÍÕ ¦ ÓÐÒÏÂÕÊÔÅצÄÛÕËÁÔÉ ÐÒÉÞÉÎÕ ÃØÏÇÏ."
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "õ ÷ÁÓ ÎÅÍÁ¤ ÖÏÄÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux - ÂÁÇÁÔÏËÏÒÉÓÔÕ×ÁÃØËÁ ÓÉÓÔÅÍÁ, ¦ ÃÅ ÏÚÎÁÞÁ¤, ÝÏ ËÏÖÅÎ Ú\n"
-"ËÏÒÉÓÔÕ×ÁÞ¦× ÍÏÖÅ ÍÁÔÉ Ó×ϧ ×ÌÁÓΦ ÕÓÔÁÎÏ×ËÉ, ×ÌÁÓΦ ÆÁÊÌÉ, ÔÏÝÏ. ýÏÂ\n"
-"¦ÌØÛŠĦÚÎÁÔÉÓÑ ÐÒÏ ÃÅ ÷É ÍÏÖÅÔÅ ÐÒÏÞÉÔÁÔÉ ð¦ÄÒÕÞÎÉË ËÏÒÉÓÔÕ×ÁÞÁ Ú\n"
-"ÓÉÓÔÅÍÉ. áÌÅ ÎÁ צÄͦÎÕ ×¦Ä ËÏÒÉÓÔÕ×ÁÞÁ Root, ÑËÉÊ ¤ ÁÄͦΦÓÔÒÁÔÏÒÏÍ\n"
-"ÓÉÓÔÅÍÉ, ËÏÒÉÓÔÕ×ÁÞ¦, ÑËÉÈ ÷É ÂÕÄÅÔÅ ÓÔ×ÏÒÀ×ÁÔÉ ÎÁ ÃØÏÍÕ ËÒÏæ, ÎÅ\n"
-"ÍÁÀÔØ ÐÒÁ×Á ÚͦÎÀ×ÁÔÉ Î¦ÞÏÇÏ × ÓÉÓÔÅͦ ËÒ¦Í Ó×Ï§È ×ÌÁÓÎÉÈ ÆÁÊÌ¦× ¦\n"
-"×ÌÁÓÎϧ ËÏÎƦ­ÕÒÁæ§. ÷É ÍÁ¤ÔÅ ÓÔ×ÏÒÉÔÉ ÒÁÈÕÎÏË ÄÌÑ ÈÏÞÁ  ÏÄÎÏÇÏ\n"
-"¤ÄÉÎÏÇÏ ËÏÒÉÓÔÕ×ÁÞÁ - ÄÌÑ ÓÁÍÏÇÏ ÓÅÂÅ. ÷É ÂÕÄÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÃÉÍ\n"
-"ÒÁÈÕÎËÏÍ ÄÌÑ ÔÏÇÏ, ÝÏ ×ÉËÏÎÕ×ÁÔÉ ÝÏÄÅÎΦ ÚÁÄÁÞ¦. ¶ ÈÏÞÁ ÃÅ ¦ ÄÕÖÅ\n"
-"ÚÒÕÞÎÏ ÒŤÓÔÒÕ×ÁÔÉÓØ × ÓÉÓÔÅͦ ÑË Root, ÁÌÅ ÏÄÎÏÞÁÓÎÏ ÃÅ ¦ ÄÕÖÅ\n"
-"ÎÅÂÅÚÐÅÞÎÏ! îÁÊÍÅÎÛÁ ÐÏÍÉÌËÁ ÍÏÖÅ ÐÒÉÚ×ÅÓÔÉ ÄÏ ÔÏÇÏ, ÝÏ ÓÉÓÔÅÍÁ ÂÕÄÅ\n"
-"ÎÅÒÏÂÏÞÏÀ. ñËÝÏ ÷É ÐÏÍÉÌÉÔÅÓØ ÑË Ú×ÉÞÁÊÎÉÊ ËÏÒÉÓÔÕ×ÁÞ, ÷É ÍÏÖÅÔÅ,\n"
-"Ú×ÉÞÁÊÎÏ, ×ÔÒÁÔÉÔÉ ÄÅÑ˦ Ó×ϧ ÄÁΦ, ÁÌÅ ÎÅ ×ÓÀ ÓÉÓÔÅÍÕ.\n"
-"\n"
-"óÐÏÞÁÔËÕ ÎÁÄÒÕËÕÊÔÅ Ó×Ϥ ÐÏ×ÎÅ ¦Í'Ñ. ãÅ ÎÅ ÏÂÏ×'ÑÚËÏ×Ï, ÷É ÍÏÖÅÔÅ\n"
-"ÎÁÄÒÕËÕ×ÁÔÉ ×ÓÅ, ÝÏ ÚÁ×ÇÏÄÎÏ. drakx ÐÏÔ¦Í ×¦ÚØÍÅ ÐÅÒÛÅ ÓÌÏ×Ï ¦\n"
-"×ÉËÏÒÉÓÔÁ¤ ÊÏÇÏ ÑË ¦Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ. ãÅ - ¦Í'Ñ Ð¦Ä ÑËÉÍ ËÏÒÉÓÔÕ×ÁÞ\n"
-"ÂÕÄÅ ÒŤÓÔÒÕ×ÁÔÉÓØ Õ ÓÉÓÔÅͦ. ÷É ÍÏÖÅÔÅ ÚͦÎÉÔÉ ÃÅ ¦Í'Ñ. ðÏÔ¦Í ÷É\n"
-"ÍÁ¤ÔÅ ××ÅÓÔÉ ÐÁÒÏÌØ. ðÁÒÏÌØ Ú×ÉÞÁÊÎÏÇÏ (ÎÅ root) ËÏÒÉÓÔÕ×ÁÞÁ ÎÅ ÔÁËÁ\n"
-"ËÒÉÔÉÞÎÁ Ò¦Þ, ÑË ÐÁÒÏÌØ ÁÄͦΦÓÔÒÁÔÏÒÁ, ÁÌÅ ×ÓÅ-ÏÄÎÏ ÎÅÍÁ¤ ÐÒÉÞÉÎ ÄÌÑ\n"
-"ÔÏÇÏ, ÝÏ ÎÅÈÔÕ×ÁÔÉ ÎÉÍ. ÷ÒÅÛÔ¦-ÒÅÛÔ, ÃÅ ÚÁÇÒÏÖÕ¤ ÷ÁÛÉÍ ×ÌÁÓÎÉÍ\n"
-"ÆÁÊÌÁÍ. \n"
-"\n"
-"ð¦ÓÌÑ ÔÏÇÏ, ÑË ÷É ÎÁÔÉÓÎÅÔÅ ÎÁ ËÎÏÐËÕ ðÒÉÊÎÑÔÉ ËÏÒÉÓÔÕ×ÁÞÁ, ÷É ÍÏÖÅÔÅ\n"
-"ÓÔ×ÏÒÉÔÉ ÝÅ ÂÁÇÁÔÏ ¦ÎÛÉÈ ËÏÒÉÓÔÕ×ÁÞ¦×. óÔ×ÏÒ¦ÔØ ÒÁÈÕÎËÉ ÄÌÑ ËÏÖÎÏÇÏ Ú\n"
-"÷ÁÛÉÈ ÄÒÕÚ¦×, ÄÌÑ ÔÁÔÁ Ê ÓÅÓÔÒÉ, ÎÁÐÒÉËÌÁÄ. ð¦ÓÌÑ ÔÏÇÏ, ÑË ÓÔ×ÏÒÅÎÏ\n"
-"×Ó¦ ÐÏÔÒ¦ÂΦ ÒÁÈÕÎËÉ ËÏÒÉÓÔÕ×ÁÞ¦×, ÎÁÔÉÓΦÔØ ËÌÁצÛÕ úÁ˦ÎÞÅÎÏ.\n"
-"\n"
-"ñËÝÏ ÷É ÎÁÔÉÓÎÅÔÅ ÎÁ ËÎÏÐËÕ äÏÄÁÔËÏ×Ï, ÷É ÂÕÄÅÔÅ ÍÁÔÉ ÍÏÖÌÉצÓÔØ\n"
-"×ÓÔÁÎÏ×ÉÔÉ ËÏÍÁÎÄÎÕ ÏÂÏÌÏÎËÕ ÄÁÎÏÇÏ ËÏÒÉÓÔÕ×ÁÞÁ (ÎÅÑ×ÎÏ ×ÓÔÁÎÏ×ÌÀ¤ÔØÓÑ\n"
-"bash). "
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"÷ÉÝÅ ÐÅÒÅ̦ÞÅΦ ×ÖÅ ¦ÓÎÕÀÞ¦ ЦÄÒÏÚĦÌÉ, ÚÎÁÊÄÅΦ ÎÁ ÷ÁÛÏÍÕ ÖÏÒÓÔËÏÍÕ\n"
-"ÄÉÓËÕ. ÷É ÍÏÖÅÔÅ ÐÒÉÔÒÉÍÕ×ÁÔÉÓØ ËÏÎƦ­ÕÒÁæ§, ×ÓÔÁÎÏ×ÌÅÎϧ\n"
-"ÐÏͦÞÎÉËÏÍ. ãÑ ËÏÎƦ­ÕÒÁÃ¦Ñ Ð¦ÄÈÏÄÉÔØ ÄÌÑ Â¦ÌØÛÏÓÔ¦ ×ÉÐÁÄ˦×\n"
-"×ÉËÏÒÉÓÔÁÎÎÑ ÓÉÓÔÅÍÉ. ñËÝÏ ×É ×ÉÒ¦ÛÉÔÅ ÚͦÎÉÔÉ ÃÀ ËÏÎƦ­ÕÒÁæÀ, ÑË\n"
-"ͦΦÍÕÍ ÷É ÍÁ¤ÔÅ ×ÉÚÎÁÞÉÔÉ ËÏÒÅÎÅ×Õ ÆÁÊÌÏ×Õ ÓÉÓÔÅÍÕ (/). îÅ ×ÉĦÌÑÊÔÅ\n"
-"ÄÌÑ ÃØÏÇÏ ÚÁÎÁÄÔÏ ÍÁÌÉÊ Ð¦ÄÒÏÚĦÌ, ÂÏ ¦ÎÁËÛÅ ×É ÎÅ ÚÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ\n"
-"×ÓÅ ÐÏÔÒ¦ÂÎÅ ÐÒÏÇÒÁÍÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ. ñËÝÏ ×É ÂÁÖÁ¤ÔÅ ÚÂÅÒÅÇÔÉ ×Ó¦ Ó×ϧ\n"
-"ÄÁΦ ÎÁ ÏËÒÅÍÏÍÕ Ð¦ÄÒÏÚĦ̦, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ÔÁËÏÖ ×ÉÂÒÁÔÉ Ð¦ÄÒÏÚĦÌ\n"
-"ÄÌÑ \"/home\" (Ô¦ÌØËÉ × ÔÏÍÕ ×ÉÐÁÄËÕ, ÑËÝÏ ×É ÍÁ¤ÔŠ¦ÌØÛÅ ÏÄÎÏÇÏ\n"
-"ЦÄÒÏÚĦÌÁ ÄÌÑ ì¦ÎÁËÓÁ). \n"
-"\n"
-"ëÏÖÅΠЦÄÒÏÚÄ¦Ì ÐÏÄÁÎÉÊ × ÔÁËÏÍÕ ×ÉÇÌÑĦ: \"îÁÚ×Á\", \"ïÂ'¤Í\".\n"
-"\n"
-"îÁÚ×Á ÒÏÚÛÉÆÒÏ×Õ¤ÔØÓÑ ÔÁË: \"ÔÉÐ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\", \"ÎÏÍÅÒ ÖÏÒÓÔËÏÇÏ\n"
-"ÄÉÓËÕ\", \"ÎÏÍÅÒ Ð¦ÄÒÏÚĦÌÕ ÎÁ ÄÉÓËÕ\", (îÁÐÒÉËÌÁÄ: \"hda1\").\n"
-"\n"
-"\"ôÉÐ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\" - ÃÅ \"hd\", ÑËÝÏ ×É ÍÁ¤ÔÅ ÄÉÓË ÔÉÐÕ IDE, ¦ \"sd\",\n"
-"ÑËÝÏ ×É ÍÁ¤ÔÅ ÖÏÒÓÔËÉÊ ÄÉÓË ÔÉÐÕ SCSI.\n"
-"\n"
-"\"îÏÍÅÒ ÖÏÒÓËÏÇÏ ÄÉÓËÕ\" - ÃÅ ÚÁ×ÖÄÉ Ì¦ÔÅÒÁ ЦÓÌÑ \"hd\" ÞÉ \"sd\". äÌÑ\n"
-"ÄÉÓË¦× ÔÉÐÕ IDE ÃÅ:\n"
-"\n"
-"    * \"a\" - ÇÏÌÏ×ÎÉÊ ÄÉÓË (master) ÎÁ ÐÅÒÛÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
-"\n"
-"    * \"b\" - ×ÔÏÒÉÎÎÉÊ (slave) ÄÉÓË ÎÁ ÐÅÒÛÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
-"\n"
-"    * \"c\" - ÇÏÌÏ×ÎÉÊ ÄÉÓË ÎÁ ÄÒÕÇÏÍÕ  ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
-"\n"
-"    * \"d\" - ×ÔÏÒÉÎÎÉÊ ÄÉÓË ÎÁ ÄÒÕÇÏÍÕ  ËÏÎÔÒÏÌÅÒ¦ IDE.\n"
-"\n"
-"äÌÑ SCSI ÄÉÓË¦× \"a\" ÏÚÎÁÞÁ¤ \"ÇÏÌÏ×ÎÉÊ ÄÉÓË\", \"b\" - ÄÒÕÇÏÒÑÄÎÉÊ ÄÉÓË, "
-"¦\n"
-"Ô.Ä. ..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"äÉÓÔÒÉÂÕÔÉ× íÁÎÄÒÅÊË ì¦ÎÁËÓ ÒÏÚͦÝÅÎÉÊ ÎÁ ˦ÌØËÏÈ\n"
-"ËÏÍÐÁËÔ-ÄÉÓËÁÈ. íÏÖÌÉ×Ï, drakX ×ÉÂÒÁ× ÐÁËÅÔÉ, ÝÏ ÚÎÁÈÏÄÑÔØÓÑ ÎÁ ¦ÎÛÉÈ\n"
-"ÄÉÓËÁÈ (צÄͦÎÎÉÈ ×¦Ä ÕÓÔÁÎÏ×ÏÞÎÏÇÏ). ëÏÌÉ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ÂÕÄÅ ÐÏÔÒ¦ÂÅÎ\n"
-"¦ÎÛÉÊ ÄÉÓË, ÐÒÏÇÒÁÍÁ ×ÉÔÑÇÎÅ ÄÁÎÉÊ ËÏÍÐÁËÔ-ÄÉÓË ¦ ÐÏÐÒÏÓÉÔØ ×ÓÔÁ×ÉÔÉ\n"
-"ÐÏÔÒ¦ÂÎÉÊ.  "
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"ôÅÐÅÒ ÞÁÓ ×ÉÂÒÁÔÉ, Ñ˦ ÐÒÏÇÒÁÍÉ ÷É ÈÏÞÅÔÅ ÍÁÔÉ × Ó×ϧÊ\n"
-"ÓÉÓÔÅͦ. íÁÎÄÒÅÊË ì¦ÎÁËÓ ÍÁ¤ ÔÉÓÑÞ¦ ÐÒÏÇÒÁÍÎÉÈ ÐÁËÅÔ¦×, ¦ ÷ÁÍ ÎÅÍÁ¤\n"
-"ÎÅÏÂȦÄÎÏÓÔ¦ ÚÎÁÔÉ §È ×Ó¦. \n"
-"\n"
-"ñËÝÏ ÷É ×ÓÔÁÎÏ×ÌÀ¤ÔÅ ÓÉÓÔÅÍÕ ¦Ú ÓÔÁÎÄÁÒÔÎÏÇÏ ËÏÍÐÁËÔ-ÄÉÓËÕ, ÷ÁÍ\n"
-"ÓÐÏÞÁÔËÕ ÂÕÄÅ ÚÁÄÁÎÅ ÚÁÐÉÔÁÎÎÑ, Ñ˦ ÄÉÓËÉ ÷É ÍÁ¤ÔÅ. ðÅÒÅצÒÔÅ Ó×ϧ\n"
-"ËÏÍÐÁËÔ-ÄÉÓËÉ, צÄͦÔØÔŠצÄÐÏצÄΦ ÐÕÎËÔÉ ÎÁ ÅËÒÁΦ ¦ ÎÁÔÉÓΦÔØ\n"
-"çÁÒÁÚÄ.\n"
-"\n"
-"ðÁËÅÔÉ Ú¦ÂÒÁΦ Õ ÇÒÕÐÉ ÐÁËÅÔ¦×, צÄÐÏצÄÎÏ ÄÏ ËÏÎËÒÅÔÎÏÇÏ ×ÖÉÔËÕ ÄÌÑ\n"
-"ÍÁÛÉÎÉ.\n"
-"\n"
-"çÒÕÐÉ ÐÁËÅÔ¦× ÒÏÚĦÌÅΦ ÎÁ ÞÏÔÉÒÉ ×ÅÌÉ˦ ÒÏÚĦÌÉ:\n"
-"\n"
-"* òÏÂÏÞÁ ÓÔÁÎæÑ: ÑËÝÏ ÷ÁÛÁ ÍÁÛÉÎÁ ÂÕÄÅ ×ÖÉ×ÁÔÉÓÑ ÑË ÒÏÂÏÞÁ ÓÔÁÎæÑ,\n"
-"×ÉÂÅÒ¦ÔØ ÏÄÎÕ ÞÉ Ë¦ÌØËÁ צÄÐÏצÄÎÉÈ ÇÒÕÐ.\n"
-"\n"
-"* çÒÁƦÞΦ ÓÅÒÅÄÏ×ÉÝÁ: ÷ÉÂÅÒ¦ÔØ ÇÒÁƦÞÎÅ ÓÅÒÅÄÏ×ÉÝÅ ÓϦ ÄÏ\n"
-"×ÐÏÄÏÂÉ. ÷ÉÂÅÒ¦ÔØ ÈÏÞÁ  ÏÄÎÅ, ÑËÝÏ ÷É ÈÏÞÅÔÅ ×ÖÉ×ÁÔÉ ÍÁÛÉÎÕ ÑË ÒÏÂÏÞÕ\n"
-"ÓÔÁÎæÀ.\n"
-"\n"
-"* òÏÚÒÏÂËÁ: ×ÉÂÅÒ¦ÔØ ×¦ÄÐÏצÄΦ ÇÒÕÐÉ, ÑËÝÏ ÃÑ ÍÁÛÉÎÁ ÂÕÄÅ ×ÖÉ×ÁÔÉÓÑ\n"
-"ÄÌÑ ÐÒÏÇÒÁÍÕ×ÁÎÎÑ.\n"
-"\n"
-"* óÅÒ×ÅÒ: ÎÁÒÅÛÔ¦, ÑËÝÏ ÍÁÛÉÎÁ ÂÕÄÕ¤ÔØÓÑ ÄÌÑ ×ÉËÏÒÉÓÔÁÎÎÑ × ÑËÏÓÔ¦\n"
-"ÓÅÒ×ÅÒÁ, ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÎÁʦÌØÛ ÒÏÚÐÏ×ÓÀÄÖÅΦ ÓÅÒצÓÉ, Ñ˦ ÷É\n"
-"ÈÏÞÅÔÅ ÂÁÞÉÔÉ ÎÁ Ó×Ï§Ê ÍÁÛÉΦ.\n"
-"\n"
-"ðÅÒÅÓÕ×ÁÎÎÑ ËÕÒÓÏÒÁ ¦ ËÏÒÏÔËÁ ÚÕÐÉÎËÁ ÎÁÄ ÐÅ×ÎÉÍ ÐÕÎËÔÏÍ ÂÕÄÅ\n"
-"×ÉÓצÞÕ×ÁÔÉ Ð¦ÄËÁÚËÕ ÐÏ ÄÁÎ¦Ê ÇÒÕЦ.\n"
-"\n"
-"ñËÝÏ ÷É ÎÁÔÉÓÎÅÔÅ ÎÁ ËÎÏÐËÕ äÏÄÁÔËÏ×Ï, ÷É ÂÕÄÅÔÅ ÍÁÔÉ ÍÏÖÌÉצÓÔØ\n"
-"×ÉÂÒÁÔÉ ÏËÒÅͦ ÐÁËÅÔÉ ÏÄÉÎ ÐÏ ÏÄÎÏÍÕ. ãÅ ÚÒÕÞÎÏ, ÑËÝÏ ÷É ÄÏÂÒÅ ÚÎÁ¤ÔÅ,\n"
-"Ñ˦ ÐÁËÅÔÉ ×ÓÔÁÎÏ×ÌÀÀÔØÓÑ, ÁÂÏ ÑËÝÏ ÷É ÈÏÞÅÔÅ ÍÁÔÉ ÐÏ×ÎÉÊ ËÏÎÔÒÏÌØ ÎÁÄ\n"
-"ÔÉÍ, ÝÏ ×ÓÔÁÎÏ×ÌÀ¤ÔØÓÑ × ÓÉÓÔÅͦ.  \n"
-"\n"
-"ñËÝÏ ÷É ÐÏÞÁÌÉ ÕÓÔÁÎÏ×ËÕ × ÒÅÖÉͦ \"ðÏÎÏ×ÌÅÎÎÑ\", ÷É ÍÏÖÅÔŠצÄͦÎÉÔÉ\n"
-"×ÉÂ¦Ò ×Ó¦È ÇÒÕÐ ÝÏÂ Õ ÓÉÓÔÅͦ ÎÅ ×ÓÔÁÎÏ×ÌÀ×ÁÌÉÓØ Î¦Ñ˦ ÎÏצ ÐÁËÅÔÉ ¦\n"
-"Ô¦ÌØËÉ ÓÉÓÔÅÍÁ ÐÏÎÏ×ÉÌÁÓØ. "
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"¶ ÎÁÒÅÛÔ¦, × ÚÁÌÅÖÎÏÓÔ¦ ×¦Ä ÔÏÇÏ, ÞÉ ÷É ×ÉÂÒÁÌÉ ¦ÎÄÉצÄÕÁÌØÎÉÊ ×ɦÒ\n"
-"ÐÁËÅÔ¦× ÞÉ Î¦, ÷ÁÍ ÂÕÄÅ ÐÏËÁÚÁÎÏ ÐÏ×ÎÅ ÄÅÒÅ×Ï ÐÁËÅÔ¦× Ú¦ÂÒÁÎÉÈ ÐÏ\n"
-"ÇÒÕÐÁÈ ¦ ЦÄÇÒÕÐÁÈ. ðÅÒÅÇÌÑÄÁÀÞÉ ÐÁËÅÔÉ ÷É ÚÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÐÏ×Φ\n"
-"ÇÒÕÐÉ, ЦÄÇÒÕÐÉ ÔÁ ¦ÎÄÉצÄÕÁÌØΦ ÐÁËÅÔÉ.\n"
-"\n"
-"ëÏÖÎÏÇÏ ÒÁÚÕ, ËÏÌÉ ÷É ×ÉÂÉÒÁ¤ÔÅ ÐÁËÅÔ × ÄÅÒÅצ, Ú'Ñ×ÌÁ¤ÔØÓÑ Ð¦ÄËÁÚËÁ,\n"
-"ÐÒÁ×ÏÒÕÞ ×¦Ä ÎÁÚ×É. \n"
-" \n"
-"ð¦ÓÌÑ ÔÏÇÏ, ÑË ÷É ÚÁ˦ÎÞÉÌÉ ×ÉÂ¦Ò ÐÁËÅÔ¦×, ÎÁÔÉÓΦÔØ ËÎÏÐËÕ\n"
-"÷ÓÔÁÎÏ×ÉÔÉ. ðÏÞÎÅÔØÓÑ ×ÌÁÓÎÅ ÕÓÔÁÎÏ×ËÁ ÓÉÓÔÅÍÉ. ñËÝÏ Ë¦ÌØ˦ÓÔØ\n"
-"×ÉÂÒÁÎÉÈ ÐÁËÅÔ¦× ×ÅÌÉËÁ, ÍÏÖÅÔŠЦÔÉ ÐÏÐÉÔÉ ËÁ×É.\n"
-"\n"
-"!! ñËÝÏ ÁÂÏ ÎÁ×ÍÉÓÎÅ, ÁÂÏ ÑË ÓËÌÁÄÏ×Á ÞÁÓÔÉÎÁ ÑËϧÓØ ÇÒÕÐÉ, ÂÕÌÏ\n"
-"×ÉÂÒÁÎÏ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ÐÅ×Φ ÓÅÒ×ÅÒÉ, ÷ÁÍ ÂÕÄÅ ÚÁÄÁÎÅ ÚÁÐÉÔÁÎÎÑ, ÞÉ ÷É\n"
-"ÓÐÒÁ×Ħ ÂÁÖÁ¤ÔÅ ÂÁÞÉÔÉ Ã¦ ÓÅÒ×ÅÒÉ ×ÓÔÁÎÏ×ÌÅÎÉÍÉ. ÷ íÁÎÄÒÅÊËÕ ×Ó¦\n"
-"×ÓÔÁÎÏ×ÌÅΦ ÓÅÒ×ÅÒÉ Á×ÔÏÍÁÔÉÞÎÏ ÚÁÐÕÓËÁÀÔØÓÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ\n"
-"ÓÉÓÔÅÍÉ. îÁצÔØ, ÑËÝÏ ÎÁ ÞÁÓ ËÕЦ×̦ ÓÉÓÔÅÍÉ ÎÅ ÂÕÌÏ ×¦ÄÏÍÏ ÐÒÏÂÌÅÍ Ú\n"
-"ÂÅÚÐÅËÏÀ ÄÁÎÉÈ ÓÅÒ×ÅÒ¦×, ÍÏÖÌÉ×Ï, ÝÏ × Ð¦ÚΦÛÉÊ ÞÁÓ ÔÁ˦ ÐÒÏÂÌÅÍÉ\n"
-"ÂÕÄÕÔØ ×ÉÑ×ÌÅΦ. ïÓÏÂÌÉ×Ï, ÑËÝÏ ÷É ÎÅ ÚÎÁ¤ÔÅ ÐÒÏ ÝÏ ÊÄÅ ÍÏ×Á,\n"
-"ÎÁÔÉÓΦÔØ ÔÕÔ ÎÁ î¦. ñËÝÏ ÷É ÎÁÔÉÓÎÅÔÅ ôÁË, ÓÅÒ×ÅÒÉ ÂÕÄÕÔØ ×ÓÔÁÎÏ×ÌÅΦ\n"
-"¦ ×ÍÉËÎÅΦ ÎÅÑ×ÎÏ!!\n"
-"\n"
-"ïÐÃ¦Ñ á×ÔÏÍÁÔÉÞΦ ÚÁÌÅÖÎÏÓÔ¦ ÚÁÂÏÒÏÎѤ ÐÏÐÅÒÅÄÖÅÎÎÑ ËÏÌÉ ÐÒÏÇÒÁÍÁ\n"
-"ÕÓÔÁÎÏ×ËÉ ÚÎÁÈÏÄÉÔØ, ÝÏ Ô¦ÌØËÉ ÝÏ ×ÉÂÒÁÎÉÊ (ÞÉ ×¦ÄͦÎÅÎÉÊ ×ɦÒ) ÐÁËÅÔ\n"
-"ÚÁÌÅÖÉÔØ ×¦Ä ¦ÎÛÏÇÏ ÐÁËÅÔÕ.\n"
-"\n"
-"íÁÌÅÎØËÁ ЦËÔÏÇÒÁÍÁ ÇÎÕÞËÏÇÏ ÄÉÓËÁ × ÓÁÍÏÍÕ ÎÉÚÕ ÓÐÉÓËÕ ÄÏÚ×ÏÌѤ\n"
-"ÚÁ×ÁÎÔÁÖÉÔÉ ÓÐÉÓÏË ÐÁËÅÔ¦× Ú ÄÉÓËÅÔÉ, ÑËÝÏ ÐÒÉ ÐÏÐÅÒÅÄÎ¦Ê ÕÓÔÁÎÏ×æ ÷É\n"
-"ÚÂÅÒÅÇÌÉ ÊÏÇÏ ÎÁ ÄÉÓËÅÔÕ. ð¦ÓÌÑ ÎÁÔÉÓËÁÎÎÑ Ã¦¤§ ËÎÏÐËÉ, ÓÉÓÔÅÍÁ\n"
-"ÐÏÐÒÏÓÉÔØ ×ÓÔÁ×ÉÔÉ ÄÉÓËÅÔÕ ¦Ú ÓÐÉÓËÏÍ ÐÁËÅÔ¦× Õ ÐÒÉצÄ. äÏÄÁÔËÏ×Ï ÷É\n"
-"ÍÏÖÅÔÅ ÏÔÒÉÍÁÔÉ ¦ÎÆÏÒÍÁæÀ ÐÒÏ ÔÅ, ÑË ÓÔ×ÏÒÉÔÉ ÔÁËÕ ÄÉÓËÅÔÕ × ÄÒÕǦÊ\n"
-"ÐÏÒÁĦ ÏÓÔÁÎÎØÏÇÏ ÐÕÎËÔÕ."
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"÷ÉÂÅÒ¦ÔØ ËÏÒÅËÔÎÕ ÏÐæÀ ÄÌÑ Ú'¤ÄÎÁÎÎÑ, ÑËÝÏ ÷É ÂÁÖÁ¤ÔŠЦÄËÌÀÞÉÔÉ ÓצÊ\n"
-"ËÏÍÐ'ÀÔÅÒ ÄÏ ÇÌÏÂÁÌØÎÉÈ ÔÅÎÅÔ ÞÉ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦. ðÅÒÛ, Î¦Ö ×ÉÂÉÒÁÔÉ\n"
-"ÏÐæÀ ÄÌÑ Ú'¤ÄÎÁÎÎÑ, ×ÍÉËΦÔØ ÐÒÉÓÔÒ¦Ê, ÝÏ DrakX Í¦Ç ×ÉÚÎÁÞÉÔÉ\n"
-"ÐÒÉÓÔÒ¦Ê Á×ÔÏÍÁÔÉÞÎÏ.\n"
-"\n"
-"íÁÎÄÒÅÊË ì¦ÎÁËÓ ÐÒÏÐÏÎÕ¤ ËÏÎƦ­ÕÒÁæÀ Ú'¤ÄÎÁÎÎÑ Ú ÔÅÎÅÔÁÍÉ ÐÒÉ\n"
-"ÕÓÔÁÎÏ×æ. äÏÓÔÕÐΦ ÔÉÐÉ ËÏÎƦ­ÕÒÁæÊ: Ú×ÉÞÁÊÎÉÊ ÍÏÄÅÍ, ÍÏÄÅÍ ISDN,\n"
-"Ú'¤ÄÎÁÎÎÑ ADSL, ËÁÂÅÌØÎÉÊ ÍÏÄÅÍ ¦, ÎÁÒÅÛÔ¦, Ú×ÉÞÁÊÎÅ Ú'¤ÄÎÁÎÎÑ\n"
-"ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦ (Ethernet).\n"
-"\n"
-"ôÕÔ ÍÉ ÎÅ ÒÏÚÇÌÑÄÁ¤ÍÏ ×Ó¦È ÐÏÄÒÏÂÉÃØ ËÏÖÎÏÇÏ ÔÉÐÕ Ú'¤ÄÎÁÎÎÑ. ðÒÏÓÔÏ\n"
-"ÐÅÒÅÓצÄÞ¦ÔØÓÑ, ÝÏ ÷É ÍÁ¤ÔÅ ×Ó¦ ÎÅÏÂȦÄΦ ÄÁΦ ×¦Ä ÐÒÏ×ÁÊÄÅÒÁ ÐÏÓÌÕÇ\n"
-"ÔÅÎÅÔ ÞÉ ÓÉÓÔÅÍÎÏÇÏ ÁÄͦΦÓÔÒÁÔÏÒÁ.\n"
-"\n"
-"íÏÖÅÔÅ Ú×ÅÒÎÕÔÉÓÑ ÄÏ ÐÏÓ¦ÂÎÉËÁ ÚÁ ÄÏÄÁÔËÏ×ÏÀ ¦ÎÆÏÒÍÁæ¤À, ÞÉ ÐÒÏÓÔÏ\n"
-"ÚÁÞÅËÁÊÔÅ, ÄÏËÉ ÓÉÓÔÅÍÁ ×ÓÔÁÎÏ×ÉÔØÓÑ, ¦ ÓËÏÒÉÓÔÁÊÔÅÓØ ÐÒÏÇÒÁÍÏÀ ÄÌÑ\n"
-"×ÓÔÁÎÏ×ÌÅÎÎÑ ËÏÎƦ­ÕÒÁæ§ Ú'¤ÄÎÁÎÎÑ ÔÅÎÅÔ.\n"
-"\n"
-"ñËÝÏ ÷É ÎÅ ÍÁ¤ÔŠΦÑËϧ ÍÅÒÅÖ¦, Φ Ú ÇÌÏÂÁÌØÎÉÍÉ ÔÅÎÅÔÅÍÉ, Φ Ú\n"
-"ÌÏËÁÌØÎÏÀ ÍÅÒÅÖÅÀ, ÎÁÔÉÓΦÔØ ËÎÏÐËÕ \"úÁÂÏÒÏÎÉÔÉ ÍÅÒÅÖÕ\".\n"
-"\n"
-"ñËÝÏ Ö ÷É ÈÏÞÅÔÅ ÓËÏÎƦ­ÕÒÕ×ÁÔÉ ÍÅÒÅÖÕ Ð¦ÚΦÛÅ, ЦÓÌÑ ÕÓÔÁÎÏ×ËÉ,\n"
-"ÎÁÔÉÓΦÔØ ÎÁ \"úÁ˦ÎÞÅÎÏ\"."
-
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ Ñ˦ ÓÅÒצÓÉ ÂÕÄÕÔØ ÚÁÐÕÓËÁÔÉÓÑ Á×ÔÏÍÁÔÉÞÎÏ ÐÒÉ\n"
-"ÓÔÁÒÔ¦ ÓÉÓÔÅÍÉ. \n"
-"\n"
-"ôÕÔ ÎÁÄÁ¤ÔØÓÑ ÓÐÉÓÏË ×Ó¦È ÓÌÕÖÂ, ÝÏ ÍÏÖÕÔØ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉÓÑ ÐÒÏÇÒÁÍÏÀ\n"
-"ÕÓÔÁÎÏ×ËÉ. ðÅÒÅÇÌÑÎØÔÅ Õ×ÁÖÎÏ Ã¦ ÓÌÕÖÂÉ ¦ צÄͦΦÔØ ×ÉÂ¦Ò ÔÉÈ, Ñ˦ ÎÅ\n"
-"ÐÏ×ÉÎΦ ÚÁÐÕÓËÁÔÉÓÑ ÐÒÉ ÓÔÁÒÔ¦ ÓÉÓÔÅÍÉ.\n"
-"\n"
-"ëÏÌÉ ÷ÁÛÁ ÍÉÛËÁ ÎÁÓÕ×Á¤ÔØÓÑ ÎÁ ÏÄÉÎ ¦Ú ÐÕÎËÔ¦×, ÎÅ×ÅÌÉÞËÁ ËÕÌØËÁ ¦Ú\n"
-"ЦÄÓËÁÚËÏÀ Ú'Ñ×ÉÔØÓÑ, ÑËÁ ÏÐÉÓÕ¤ ÆÕÎËæ§ ÄÁÎÏÇÏ ÓÅÒצÓÕ.\n"
-"\n"
-"âÕÄØÔÅ ÏÓÏÂÌÉ×Ï Õ×ÁÖÎÉÍÉ, ÑËÝÏ ×É ÚÂÉÒÁ¤ÔÅÓØ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÃÀ\n"
-"ÓÉÓÔÅÍÕ ÑË ÓÅÒ×ÅÒ: ÎÁÐÅ×ÎÅ ÎÅ ÐÏÔÒ¦ÂÎÏ ÓÔÁÒÔÕ×ÁÔÉ Î¦Ñ˦ ÓÅÒצÓÉ, Ñ˦\n"
-"ÎÅ ÂÕÄÕÔØ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ. ðÁÍ'ÑÔÁÊÔÅ, ÂÕÄØ-ÌÁÓËÁ, ÝÏ ÄÅÑ˦ ×ÍÉËÎÅΦ\n"
-"ÓÅÒצÓÉ ÍÏÖÕÔØ ÂÕÔÉ ÎÅÂÅÚÐÅÞÎÉÍÉ ÎÁ ÓÅÒ×ÅÒ¦.\n"
-"ñË ÚÁÇÁÌØÎÅ ÐÒÁ×ÉÌÏ, ×ÉÂÉÒÁÊÔÅ Ô¦ÌØËÉ Ô¦ ÓÅÒצÓÉ, Ñ˦ ÷ÁÍ ÓÐÒÁ×Ħ \n"
-"ÎÅÏÂȦÄΦ."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/ì¦ÎÁËÓ ÏÂÒÏÂÌѤ ÞÁÓ ×¦ÄÎÏÓÎÏ ÄÏ ÞÁÓÕ ÐÏ ½Ò¦ÎצÞÕ (GMT ÁÂÏ\n"
-"\"Greenwich Mean Time\") ¦ ÐÅÒÅ×ÏÄÉÔØ ÊÏÇÏ × Í¦ÓÃÅ×ÉÊ ÞÁÓ Õ\n"
-"צÄÐÏצÄÎÏÓÔ¦ ÄÏ ÞÁÓÏ×ÏÇÏ ÐÏÑÓÕ, × ÑËÏÍÕ ×É ÚÎÁÈÏÄÉÔÅÓØ."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-"X (×¦Ä ÎÁÚ×É X Window System) ÌÅÖÉÔØ × ÏÓÎÏצ ÇÒÁƦÞÎÏÇÏ ¦ÎÔÅÒÆÅÊÓÕ,\n"
-"ÎÁ ÑËÏÍÕ ÂÁÚÕÀÔØÓÑ ×Ó¦ ÇÒÁƦÞΦ ÓÅÒÅÄÏ×ÉÝÁ (KDE, Gnome, AfterStep,\n"
-"WindowMaker...), ÝÏ ×ÈÏÄÑÔØ ÄÏ ÓËÌÁÄÕ íÁÎÄÒÅÊË ì¦ÎÁËÓÁ. ÷ Ã¦Ê ÓÅËæ§\n"
-"ÕÓÔÁÎÏ×ËÉ drakX ÓÐÒÏÂÕ¤ ÎÁÓÔÒϧÔÉ ËÏÎƦ­ÕÒÁæÀ X Á×ÔÏÍÁÔÉÞÎÏ.\n"
-"\n"
-"ãÑ ÐÒÏÇÒÁÍÁ ÎÅ ÓÐÒÁÃØÏ×Õ¤ ÄÕÖÅ Ò¦ÄËÏ. ´ÄÉÎÏÀ ÐÒÉÞÉÎÏÀ ÎÅÕÄÁÞ¦ ÍÏÖÅ\n"
-"ÂÕÔÉ ÔÏÊ ÆÁËÔ, ÝÏ ÷ÁÛÅ ÁÐÁÒÁÔÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ ÚÁÎÁÄÔÏ ÓÔÁÒÅ (ÁÂÏ\n"
-"ÚÁÎÁÄÔÏ ÎÏ×Å). ñËÝÏ ËÏÎƦ­ÕÒÁÃ¦Ñ ÐÒÏÊÄÅ ÕÓЦÛÎÏ, X ÓÔÁÒÔÕ¤ Á×ÔÏÍÁÔÉÞÎÏ\n"
-"Ú ÎÁÊ×ÉÝÏÀ ÒÏÚĦÌØÎÏÀ ÚÄÁÔΦÓÔÀ, ÎÁ ÑËÕ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ ÁÐÁÒÁÔÕÒÕ ¦\n"
-"ÚÁÌÅÖÎÏ ×¦Ä ÒÏÚͦÒÁ ÍÏΦÔÏÒÁ. ú'Ñ×ÉÔØÓÑ ×¦ËÎÏ Ú ÚÁÐÉÔÁÎÎÑÍ, ÞÉ ÍÏÖÅÔÅ\n"
-"÷É ÐÏÂÁÞÉÔÉ X. \n"
-"\n"
-"ñËÝÏ ÷É ×ÓÔÁÎÏ×ÌÀ¤ÔÅ ÓÉÓÔÅÍÕ × åËÓÐÅÒÔÎÏÍÕ ÒÅÖÉͦ, ÷É ÐÏÔÒÁÐÉÔÅ ×\n"
-"ÐÒÏÇÒÁÍÕ ðÏͦÞÎÉËÁ ËÏÎƦ­ÕÒÁÔÏÒÁ X. ú×ÅÒΦÔØÓÑ ÄÏ ×¦ÄÐÏצÄÎÏÇÏ ÒÏÚĦÌÕ\n"
-"ÄÏËÕÍÅÎÔÁæ§ Ú ÐÒÉ×ÏÄÕ ÃØÏÇÏ. \n"
-"\n"
-"ñËÝÏ ÷É ÐÏÂÁÞÉÔÅ ÚÁÐÉÔÁÎÎÑ ¦ ÄÁÓÔÅ ÎÁ ÎØÏÇÏ ÓÔ×ÅÒÄÎÕ ×¦ÄÐÏצÄØ, drakX\n"
-"ÐÅÒÅÊÄÅ ÄÏ ÎÁÓÔÕÐÎÏÇÏ ËÒÏËÕ ÕÓÔÁÎÏ×ËÉ ÓÉÓÔÅÍÉ. ñËÝÏ ÷É ÎÅ ÂÁÞÉÔÅ\n"
-"ÚÁÐÉÔÁÎÎÑ, ÃÅ ÐÒÏÓÔÏ ÏÚÎÁÞÁ¤, ÝÏ ËÏÎƦ­ÕÒÁÃ¦Ñ ÂÕÌÁ ÎÅצÒÎÏÀ ¦ ÔÅÓÔ\n"
-"Á×ÔÏÍÁÔÉÞÎÏ ÚÁ˦ÎÞÉÔØÓÑ ÞÅÒÅÚ 10 ÓÅËÕÎÄ, צÄÎÏ×É×ÛÉ ÅËÒÁÎ."
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"íÏÖÌÉ×Ï Ú ÐÅÒÛÏÇÏ ÒÁÚÕ ÷É ÎÅ ÚÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÎÁÊËÒÁÝÉÊ ÄÉÓÐÌÅÊ\n"
-"(ÅËÒÁÎ ÚÁÍÁÌÉÊ, ÐÏÓÕÎÕÔÉÊ ×¦Ë, ÔÏÝÏ). ïÓØ ÞÏÍÕ, ÎÁצÔØ ÑËÝÏ X ÓÔÁÒÔÕ¤\n"
-"צÒÎÏ, drakX ÐÅÒÅÐÉÔÁ¤ ÷ÁÓ, ÞÉ Ð¦ÄÈÏÄÉÔØ ÷ÁÍ ÄÁÎÁ ËÏÎƦ­ÕÒÁÃ¦Ñ ¦\n"
-"ÚÁÐÒÏÐÏÎÕ¤ ÚͦÎÉÔÉ ÄÅÑ˦ צÄÅÏÒÅÖÉÍÉ, ÐÏËÁÚÁ×ÛÉ §È ÓÐÉÓÏË. \n"
-"\n"
-"ñËÝÏ Î¦ÞÏÇÏ ÎÅ ÓÐÒÁÃÀ¤, ¦ ÷É ÎÅ ÚÍÏÖÅÔÅ ÚÁÐÕÓÔÉÔÉ X ÎÁ Ó×Ï§Ê ÍÁÛÉΦ,\n"
-"×ÉÂÅÒ¦ÔØ ÐÕÎËÔ úͦÎÉÔÉ ×¦ÄÅÏ ÐÌÁÔÕ, ×ÉÂÅÒ¦ÔØ ðÌÁÔÉ ÎÅÍÁ¤ × ÓÐÉÓËÕ\n"
-"(Unlisted card) ¦, ËÏÌÉ drakX ÚÁÐÉÔÁ¤ ÑËÉÊ ÓÅÒ×ÅÒ ÷É ÈÏÞÅÔÅ\n"
-"×ÓÔÁÎÏ×ÉÔÉ, ×ÉÂÅÒ¦ÔØ FBDev. ãÅÊ ÒÅÖÉÍ ÚÁÓÔÒÁÈÏ×ÁÎÉÊ ×¦Ä ÎÅÕÄÁÞ, ÑËÉÊ\n"
-"ЦÄÔÒÉÍÕ¤ÔØÓÑ Â¦ÌØÛ¦ÓÔÀ ÓÕÞÁÓÎÉÈ ×¦ÄÅÏ ÐÌÁÔ. ð¦ÓÌÑ ÃØÏÇÏ ×ÉÂÅÒ¦ÔØ\n"
-"÷ÉÐÒÏÂÕ×ÁÔÉ ÝÅ ÒÁÚ."
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"ð¦ÓÌÑ ÃØÏÇÏ ÷ÁÍ ÂÕÄÅ ÚÁÄÁÎÅ ÚÁÐÉÔÁÎÎÑ, ÞÉ ÈÏÔ¦ÌÉ Â ÷É, ÝÏ ÇÒÁƦÞÎÉÊ\n"
-"¦ÎÔÅÒÆÅÊÓ ×ÍÉËÁ×ÓÑ Á×ÔÏÍÁÔÉÞÎÏ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ. úÁÕ×ÁÖÔÅ, ÝÏ\n"
-"ÃÅ ÚÁÐÉÔÁÎÎÑ ÂÕÄÅ ÚÁÄÁÎÅ ÎÁצÔØ ÑËÝÏ ÷É ×¦ÄÍÏ×ÉÔÅÓØ ×¦Ä ×ÉÐÒÏÂÏ×Õ×ÁÎÎÑ\n"
-"ËÏÎƦ­ÕÒÁæ§. ú×ÉÞÁÊÎÏ Ö, ÑËÝÏ ÷ÁÛÁ ÍÁÛÉÎÁ ÂÕÄÅ ÐÒÁÃÀ×ÁÔÉ ÓÅÒ×ÅÒÏÍ,\n"
-"ÁÂÏ ÑËÝÏ ÷É ÎÅ ÚÍÏÇÌÉ ×¦ÒÎÏ ÎÁÓÔÒϧÔÉ X, ÔÕÔ ËÒÁÝŠצÄÐÏצÓÔÉ \"î¦\"."
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"ôÅÐÅÒ ×É ÍÁ¤ÔÅ ×ÉÂÒÁÔÉ ÄÅ ÓÁÍÅ ×É Â ÈÏÔ¦ÌÉ ×ÓÔÁÎÏ×ÉÔÉ Ó×ÏÀ ÓÉÓÔÅÍÕ\n"
-"íÁÎÄÒÅÊË ì¦ÎÁËÓ ÎÁ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ.  ñËÝÏ ÄÉÓË ÐÕÓÔÉÊ, ÁÂÏ ÑËÝÏ ×¦Î\n"
-"ÐÏ×ΦÓÔÀ ÚÁÊÎÑÔÉÊ ¦ÎÛÏÀ ÏÐÅÒÁæÊÎÏÀ ÓÉÓÔÅÍÏÀ, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ\n"
-"ÐÅÒÅÒÏÚÐÏĦÌÉÔÉ ÄÉÓË. æÁËÔÉÞÎÏ, ÐÅÒÅÒÏÚÐÏÄ¦Ì ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ ÏÚÎÁÞÁ¤,\n"
-"ÝÏ ÄÉÓË ÂÕÄÅ ÒÏÚĦÌÅÎÏ ÎÁ ÌÏǦÞΦ ЦÄÒÏÚĦÌÉ, ÄÌÑ ÔÏÇÏ, ÝÏ ÓÔ×ÏÒÉÔÉ\n"
-"ÐÒÏÓÔ¦Ò ÄÌÑ ÕÓÔÁÎÏ×ËÉ íÁÎÄÒÅÊË ì¦ÎÁËÓÁ.\n"
-"\n"
-"þÅÒÅÚ ÔÅ, ÝÏ ÎÁÓ̦ÄËÉ ×¦Ä ÐÅÒÅÒÏÚÐÏĦÌÕ ÄÉÓËÕ Ú×ÉÞÁÊÎÏ ÎÅÚ×ÏÒÏÔΦ, ÃÑ\n"
-"ÏÐÅÒÁÃ¦Ñ ÍÏÖÅ ÂÕÔÉ È×ÉÌÀÀÞÏÀ ÄÌÑ ÎÅÄÏÓצÄÞÅÎÏÇÏ ËÏÒÉÓÔÕ×ÁÞÁ.\n"
-"\n"
-"ñËÝÏ ÷É ËÏÒÉÓÔÕ¤ÔÅÓØ ÐÒÏÇÒÁÍÏÀ ÕÓÔÁÎÏ×ËÉ × ÅËÓÐÅÒÔÎÏÍÕ ÒÅÖÉͦ, ÷É\n"
-"×צÊÄÅÔÅ × ÚÁӦ ÄÌÑ ÒÏÚÂÉ×ËÉ ÄÉÓË¦× ÎÁ ЦÄÒÏÚĦÌÉ íÁÎÄÒÅÊË ì¦ÎÁËÓÁ:\n"
-"DiskDrake. ÷¦Ä ÎÁÄÁ¤ ÍÏÖÌÉצÓÔØ ÔÏÞÎÏÇÏ ×ÉÂÏÒÕ ÒÏÚͦҦ×\n"
-"ЦÄÒÏÚĦ̦×. ðÏÄÉצÔØÓÑ ÒÏÚÄ¦Ì DiskDrake × Ð¦ÄÒÕÞÎÉËÕ. ÷É ÍÏÖÅÔÅ ÔÁËÏÖ\n"
-"ÓËÏÒÉÓÔÕ×ÁÔÉÓØ ÐÏͦÞÎÉËÁÍÉ ÄÌÑ Ò¦ÚÎÉÈ ÅÔÁÐ¦× ÕÓÔÁÎÏ×ËÉ, ÑËÝÏ ËÌÁÃÎÅÔÅ\n"
-"ËÎÏÐËÕ ðÏͦÞÎÉË.\n"
-"\n"
-"ãÅÊ ÐÏͦÞÎÉË ÓÐÒÏÝÕ¤ ÐÒÏÃÅÓ. ðÅÒÛ, Î¦Ö ÐÏÞÉÎÁÔÉ ÐÅÒÅÒÏÚÐÏÄ¦Ì ÄÉÓËÕ,\n"
-"ÐÒÏËÏÎÓÕÌØÔÕÊÔÅÓØ Ú ÐÏÓ¦ÂÎÉËÏÍ ËÏÒÉÓÔÕ×ÁÞÁ.\n"
-"\n"
-"ñËÝÏ Ð¦ÄÒÏÚĦÌÉ ×ÖÅ ÂÕÌÏ ×ÉÚÎÁÞÅÎÏ (×¦Ä ÐÏÐÅÒÅÄÎØϧ ÕÓÔÁÎÏ×ËÉ ÁÂÏ ÚÁ\n"
-"ÄÏÐÏÍÏÇÏÀ ¦ÎÛϧ ÐÒÏÇÒÁÍÉ ÒÏÚÐÏĦÌÕ ÄÉÓ˦×), ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ×ÉÂÒÁÔÉ\n"
-"æ ЦÄÒÏÚĦÌÉ ÄÌÑ Õ×ÓÔÁÎÏ×ÌÅÎÎÑ ÏÐÅÒÁæÊÎϧ ÓÉÓÔÅÍÉ ì¦ÎÁËÓ ÎÁ ÃÉÈ\n"
-"ЦÄÒÏÚĦÌÁÈ.\n"
-"\n"
-"ñËÝÏ ÔÁ˦ ЦÄÒÏÚĦÌÉ ÝÅ ÎÅ ÂÕÌÉ ×ÉÚÎÁÞÅΦ, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ §È\n"
-"ÓÔ×ÏÒÉÔÉ. äÌÑ ÃØÏÇÏ ×É ÍÏÖÅÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ ÐÏͦÞÎÉËÏÍ, ÑËÉÊ ÷É\n"
-"ÂÁÞÉÔÅ ×ÇÏÒ¦. ÷ ÚÁÌÅÖÎÏÓÔ¦ ×¦Ä ËÏÎƦ­ÕÇÁæ§ ÷ÁÛÏÇÏ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ, ÷É\n"
-"ÍÏÖÅÔÅ ÍÁÔÉ Ë¦ÌØËÁ Ò¦ÚÎÉÈ ×ÁÒ¦ÁÎÔ¦× ËÏÎƦ­ÕÒÁæ§.\n"
-"\n"
-"* ëÏÒÉÓÔÕ×ÁÔÉÓÑ ¦ÓÎÕÀÞÉÍÉ Ð¦ÄÒÏÚĦÌÁÍÉ: ÐÏͦÞÎÉË ×ÉÑ×É× ÏÄÉÎ ÁÂÏ\n"
-"¦ÌØÛŠЦÄÒÏÚÄ¦Ì¦× ì¦ÎÁËÓÁ ÎÁ ÷ÁÛÏÍÕ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ. ñËÝÏ ×É ÈÏÞÅÔÅ\n"
-"ÚÂÅÒÅÇÔÉ Ã¦ ЦÄÒÏÚĦÌÉ, ×ÉÂÅÒ¦ÔØ ÃÅÊ ÐÕÎËÔ.\n"
-"\n"
-"\n"
-"* óÔÅÒÔÉ ×ÅÓØ ÄÉÓË: ÑËÝÏ ×É ÈÏÞÅÔÅ ÓÔÅÒÔÉ ×Ó¦ ÄÁΦ ÎÁ ×Ó¦È Ð¦ÄÒÏÚĦÌÁÈ\n"
-"÷ÁÛÏÇÏ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ ¦ ÚÁͦÎÉÔÉ §È ÎÏ×ÏÀ ÓÉÓÔÅÍÏÀ íÁÎÄÒÅÊË ì¦ÎÁËÓ,\n"
-"ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÃÀ ÏÐæÀ. âÕÄØÔÅ Õ×ÁÖΦ, ÂÏ ×ÉÂÒÁ×ÛÉ ÃÅÊ\n"
-"ÒÅÖÉÍ, ×É ×ÖÅ ÎÅ ÚÍÏÖÅÔÅ ÐÏ×ÅÒÎÕÔÉÓØ ÎÁÚÁÄ.\n"
-"\n"
-"* óËÏÒÉÓÔÕ×ÁÔÉÓØ ×¦ÌØÎÉÍ ÐÒÏÓÔÏÒÏÍ ÎÁ ЦÄÒÏÚĦ̦ ÏÐÅÒÁæÊÎϧ ÓÉÓÔÅÍÉ\n"
-"Windows: ÑËÝÏ ÎÁ ËÏÍÐ'ÀÔÅÒ¦ ×ÓÔÁÎÏ×ÌÅÎÁ ÏÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ Microsoft\n"
-"Windows ¦ ×ÏÎÁ ÚÁÊÍÁ¤ ×ÅÓØ ÐÒÏÓÔ¦Ò ÎÁ ÷ÁÛÏÍÕ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ, ÷É\n"
-"ÐÏ×ÉÎΦ ÓÔ×ÏÒÉÔÉ ×¦ÌØÎÉÊ ÐÒÏÓÔ¦Ò ÎÁ ÄÉÓËÕ ÄÌÑ ì¦ÎÁËÓÁ. ãÅ ÍÏÖÎÁ\n"
-"ÚÒÏÂÉÔÉ, ÓÔÅÒÛÉ ÐÏ×ΦÓÔÀ ×ÓÀ ÓÉÓÔÅÍÕ Windows (ÄÉ×. \"óÔÅÒÔÉ ×ÅÓØ ÄÉÓË\"\n"
-"ÁÂÏ ÒÅÖÉÍ ÕÓÔÁÎÏ×ËÉ \"åËÓÐÅÒÔ\") ÁÂÏ ÚͦÎÉ×ÛÉ ÒÏÚÍ¦Ò Ð¦ÄÒÏÚĦÌÕ, ÑËÉÊ\n"
-"ÚÁÊÎÑÔÉÊ Windows. úͦÎÁ ÒÏÚͦÒÕ Ð¦ÄÒÏÚĦÌÕ ÍÏÖÅ ÂÕÔÉ ÚÒÏÂÌÅÎÁ ÂÅÚ\n"
-"×ÔÒÁÔÉ ÄÁÎÉÈ. ãÅÊ ÓÐÏӦ ÕÓÔÁÎÏ×ËÉ ÒÅËÏÍÅÎÄÕ¤ÔØÓÑ, ÑËÝÏ ×É ÈÏÞÅÔÅ ÍÁÔÉ\n"
-"ÏÂÉÄצ ÓÉÓÔÅÍÉ, ¦ Microsoft Windows, ¦ íÁÎÄÒÅÊË ì¦ÎÁËÓ ×ÓÔÁÎÏ×ÌÅΦ ÎÁ\n"
-"Ó×ϤÍÕ ËÏÍÐ'ÀÔÅÒ¦.\n"
-"\n"
-"ðÅÒÛ, Î¦Ö ×ÉÂÉÒÁÔÉ ÃÅÊ ÒÅÖÉÍ, ÚÒÏÚÕͦÊÔÅ, ÝÏ Õ ÃØÏÍÕ ×ÉÐÁÄËÕ ÒÏÚͦÒ\n"
-"ЦÄÒÏÚĦÌÕ ÄÌÑ Microsoft Windows ÂÕÄÅ ÍÅÎÛÉÍ, Î¦Ö ÚÁÒÁÚ. ãÅ ÏÚÎÁÞÁ¤,\n"
-"ÝÏ ×É ÂÕÄÅÔÅ ÍÁÔÉ ÍÅÎÛŠצÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÐÒÉ ÒÏÂÏÔ¦ × Microsoft\n"
-"Windows ÄÌÑ ÚÁÐÉÓÕ ÷ÁÛÉÈ ÄÁÎÉÈ ÔÁ ÐÒÏÇÒÁÍ.\n"
-"\n"
-"* óÔÅÒÔÉ Windows: ÃÅ ÐÒÏÓÔÏ Ú¦ÔÒÅ ÐÏ×ΦÓÔÀ ×ÅÓØ ÄÉÓË ¦ ÐÏÞÎÅ ÓצÖÉÊ\n"
-"ÐÏÄ¦Ì ÎÁ ЦÄÒÏÚĦÌÉ. ÷Ó¦ ÄÁΦ ÎÁ ÄÉÓËÕ ÂÕÄÅ ×ÔÒÁÞÅÎÏ.\n"
-"\n"
-"!! ñËÝÏ ÷É ×ÉÂÅÒÅÔÅ ÃÅÊ ÐÕÎËÔ, ×Ó¦ ÄÁΦ ÎÁ ÄÉÓËÕ ÂÕÄÕÔØ ×ÔÒÁÞÅΦ. !!\n"
-"\n"
-"* åËÓÐÅÒÔÎÉÊ ÒÅÖÉÍ: ÑËÝÏ ×É ÈÏÞÅÔÅ ×ÒÕÞÎÕ ÐÅÒÅÒÏÚÐÏĦÌÉÔÉ ÐÒÏÓÔ¦Ò ÎÁ\n"
-"÷ÁÛÏÍÕ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ, ×É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÃÅÊ ÒÅÖÉÍ. ïÄÎÁË ÂÕÄØÔÅ\n"
-"ÏÂÅÒÅÖÎÉÍÉ ÐÅÒÛ, Î¦Ö ×ÉÂÉÒÁÔÉ ÃÅÊ ÒÅÖÉÍ. ãÅ -- ÐÏÔÕÖÎÉÊ, ÁÌÅ ÄÕÖÅ\n"
-"ÎÅÂÅÚÐÅÞÎÉÊ ÒÅÖÉÍ. ÷É ÍÏÖÅÔÅ ×ÔÒÁÔÉÔÉ ×Ó¦ ÄÁΦ ÄÕÖÅ ÐÒÏÓÔÏ. ïÔÖÅ, ÎÅ\n"
-"×ÉÂÉÒÁÊÔÅ ÃÅÊ ÒÅÖÉÍ, ÑËÝÏ ÄÏÂÒÅ ÎÅ ÒÏÚÕͦ¤ÔÅ, ÝÏ ÓÁÍÅ ×É ÒÏÂÉÔÅ."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"âÕÄØ-ÑËÉÊ Ú ÎÏ×ÉÈ ×ÉÚÎÁÞÅÎÉÈ Ð¦ÄÒÏÚÄ¦Ì¦× ÍÁ¤ ÂÕÔÉ ×¦ÄÆÏÒÍÁÔÏ×ÁÎÉÊ ÄÌÑ\n"
-"×ÉËÏÒÉÓÔÁÎÎÑ (ÆÏÒÍÁÔÕ×ÁÎÎÑ ÏÚÎÁÞÁ¤ ÓÔ×ÏÒÅÎÎÑ ÆÁÊÌÏ×ϧ ÓÉÓÔÅÍÉ).\n"
-"\n"
-"úÁÒÁÚ ÷É, ÍÏÖÌÉ×Ï, ÚÁÈÏÞÅÔŠצÄÆÏÒÍÁÔÕ×ÁÔÉ ÄÅÑ˦ Ú ÕÖÅ ¦ÓÎÕÀÞÉÈ\n"
-"ЦÄÒÏÚÄ¦Ì¦× ÄÌÑ ÔÏÇÏ, ÝÏ ÓÔÅÒÔÉ ÄÁΦ, Ñ˦ ÎÁ ÎÉÈ ÚÁÐÉÓÁΦ. ñËÝÏ ÷É\n"
-"ÈÏÞÅÔÅ ÃÅ ÚÒÏÂÉÔÉ, ×ÉÂÅÒ¦ÔØ ÔÁËÏÖ Ð¦ÄÒÏÚĦÌÉ, Ñ˦ ×É ÈÏÞÅÔÅ\n"
-"צÄÆÏÒÍÁÔÕ×ÁÔÉ.\n"
-"\n"
-"úÁÕ×ÁÖÔÅ, ÏÄÎÁË, ÝÏ ÎÅ ÏÂÏ×'ÑÚËÏ×Ï ÆÏÒÍÁÔÕ×ÁÔÉ ×Ó¦ ЦÄÒÏÚĦÌÉ, Ñ˦\n"
-"¦ÓÎÕ×ÁÌÉ ÒÁΦÛÅ. ÷É ÍÁ¤ÔŠצÄÆÏÒÍÁÔÕ×ÁÔÉ Ð¦ÄÒÏÚĦÌÉ, Ñ˦ ͦÓÔÑÔØ\n"
-"ÏÐÅÒÁæÊÎÕ ÓÉÓÔÅÍÕ (ÔÁ˦, ÑË \"/\", \"/usr\" ÞÉ \"/var\"), ÁÌÅ ×É ÎÅ ÍÁ¤ÔÅ\n"
-"ÆÏÒÍÁÔÕ×ÁÔÉ Ô¦ ÒÏÚĦÌÉ, Ñ˦ ͦÓÔÑÔØ ÄÁΦ, Ñ˦ ×É Â ÈÏÔ¦ÌÉ ÚÂÅÒÅÇÔÉ\n"
-"(ÔÉÐÏ×Ï ÃŠЦÄÒÏÚÄ¦Ì \"/home\").\n"
-"\n"
-"âÕÄØÔÅ Õ×ÁÖΦ Ú ×ÉÂÏÒÏÍ Ð¦ÄÒÏÚĦ̦×. ð¦ÓÌÑ ÆÏÒÍÁÔÕ×ÁÎÎÑ ×Ó¦ ÄÁΦ ÎÁ\n"
-"ЦÄÒÏÚĦÌÁÈ ÂÕÄÕÔØ ÓÔÅÒÔ¦ ¦ ×É ÎÅ ÚÍÏÖÅÔŠצÄÎÏ×ÉÔÉ Î¦ÞÏÇÏ Ú ÎÉÈ.\n"
-"\n"
-"ëÌÁÃΦÔØ ÎÁ \"çÁÒÁÚÄ\" ËÏÌÉ ×É ÇÏÔÏצ ÐÒÉÓÔÕÐÉÔÉ ÄÏ ÆÏÒÍÁÔÕ×ÁÎÎÑ\n"
-"ЦÄÒÏÚĦ̦×.\n"
-"\n"
-"ëÌÁÃΦÔØ ÎÁ \"÷¦ÄͦÎÉÔÉ\", ÑËÝÏ ×É ÈÏÞÅÔÅ ×ÉÂÒÁÔÉ ¦ÎÛ¦ ЦÄÒÏÚĦÌÉ ÄÌÑ\n"
-"ÔÏÇÏ, ÝÏ ×ÓÔÁÎÏ×ÉÔÉ ÎÏ×Õ ÓÉÓÔÅÍÕ íÁÎÄÒÅÊË ì¦ÎÁËÓ.\n"
-"\n"
-"îÁÔÉÓΦÔØ ÎÁ äÏÄÁÔËÏ×Ï, ÑËÝÏ ÷É ÈÏÞÅÔÅ ×ÉÂÒÁÔÉ Ð¦ÄÒÏÚĦÌÉ ÄÌÑ §ÈÎØϧ\n"
-"ÐÅÒÅצÒËÉ ÎÁ ¦ÓÎÕ×ÁÎÎÑ Ú¦ÊÎÉÈ ÂÌÏ˦×."
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"÷ÁÛÁ ÎÏ×Á ÓÉÓÔÅÍÁ íÁÎÄÒÅÊË ì¦ÎÁËÓ ×ÓÔÁÎÏ×ÌÀ¤ÔØÓÑ × ÄÁÎÉÊ ÍÏÍÅÎÔ. ÷\n"
-"ÚÁÌÅÖÎÏÓÔ¦ ×¦Ä ÒÏÚͦÒÕ ÐÁËÅÔ¦×, Ñ˦ ×É ×ÉÂÒÁÌÉ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ÔÁ צÄ\n"
-"Û×ÉÄËÏÓÔ¦ ÷ÁÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ ÃÑ ÏÐÅÒÁÃ¦Ñ ÍÏÖÅ ÚÁÊÎÑÔÉ ×¦Ä Ë¦ÌØËÏÈ\n"
-"È×ÉÌÉÎ ÄÏ ×¦ÄÞÕÔÎÏÇÏ ×¦ÄÔÉÎËÕ ÞÁÓÕ.\n"
-"\n"
-"\n"
-"ðÏÔÅÒЦÔØ, ÂÕÄØ-ÌÁÓËÁ."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"ðÅÒÛ, Î¦Ö ¦ÔÉ ÄÁ̦, ÷É ÍÁ¤ÔÅ ÐÒÏÞÉÔÁÔÉ Õ×ÁÖÎÏ ÕÍÏ×É Ì¦ÃÅÎÚ¦§. ÷ÏÎÁ\n"
-"ÓÔÏÓÕ¤ÔØÓÑ ×ÓØÏÇÏ ÄÉÓÔÒÕÂÕÔÉ×Õ íÁÎÄÒÅÊË ì¦ÎÁËÓ, ¦, ÑËÝÏ ÷É ÎÅ\n"
-"ÐÏÇÏÄÖÕ¤ÔÅÓØ Ú ÕÍÏ×ÁÍÉ Ì¦ÃÅÎÚ¦§, ÎÁÔÉÓΦÔØ ËÎÏÐËÕ ÷¦ÄÍÏ×ÉÔÉÓØ. ãÅ ÔÏÇÏ\n"
-"Ö ÞÁÓÕ ×¦ÄͦÎÉÔØ ÕÓÔÁÎÏ×ËÕ ÓÉÓÔÅÍÉ. äÌÑ ÐÒÏÄÏ×ÖÅÎÎÑ ÕÓÔÁÎÏ×ËÉ\n"
-"ÎÁÔÉÓΦÔØ ËÎÏÐËÕ ðÏÇÏÄÉÔÉÓØ."
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"ôÅÐÅÒ ÞÁÓ ×ÉÂÒÁÔÉ Ò¦×ÅÎØ ÄÏÓÔÕÐÕ (ÂÅÚÐÅËÉ) ÄÌÑ ÷ÁÛϧ ÓÉÓÔÅÍÉ. úÏÌÏÔÅ\n"
-"ÐÒÁ×ÉÌÏ: ÞÉÍ ÛÉÒÛÅ ËÏÌÏ ÄÏÓÔÕÐÕ ÍÁ¤ ÍÁÛÉÎÁ, ¦ ÞÉÍ ×ÁÖÌÉצۦ ÄÁΦ, ÝÏ ×\n"
-"Î¦Ê ÚÂÅÒ¦ÇÁÀÔØÓÑ, ÔÉÍ ×ÉÝÉÍ ÍÁ¤ ÂÕÔÉ Ò¦×ÅÎØ ÂÅÚÐÅËÉ ÓÉÓÔÅÍÉ. áÌÅ ×\n"
-"¦ÌØÛÏÓÔ¦ ×ÉÐÁÄ˦×, ×ÉÝÉÊ Ò¦×ÅÎØ ÂÅÚÐÅËÉ ÄÏÓÑÇÁ¤ÔØÓÑ ÚÁ ÒÁÈÕÎÏË\n"
-"ÄÏÄÁÔËÏ×ÉÈ ÎÅÚÒÕÞÎÏÓÔÅÊ × ËÏÒÉÓÔÕ×ÁÎΦ. äÏÄÁÔËÏ×Õ ¦ÎÆÏÒÍÁæÀ Ú ÃØÏÇÏ\n"
-"ÐÉÔÁÎÎÑ ÍÏÖÎÁ ÏÔÒÉÍÁÔÉ Ú ÓÅËæ§ MSEC × äÏצÄËÏ×ÏÍÕ ðÏÓ¦ÂÎÉËÕ.\n"
-"\n"
-"ñËÝÏ ÷É ÎÅ ÚÎÁ¤ÔÅ, ÎÁ ÞÏÍÕ ÚÕÐÉÎÉÔÉÓØ, ÚÁÌÉÛÔÅ ×ÓÅ ÑË ¤."
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"úÁÒÁÚ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ×ÉÂÒÁÔÉ, Ñ˦ ЦÄÒÏÚĦÌÉ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÄÌÑ ÷ÁÛϧ\n"
-"ÎÏ×ϧ ÓÉÓÔÅÍÉ ì¦ÎÁËÓ íÁÎÄÒÅÊË. ñËÝÏ Ã¦ ЦÄÒÏÚĦÌÉ ×ÖÅ ÂÕÌÉ ×ÉÚÎÁÞÅΦ\n"
-"(×¦Ä ÐÏÐÅÒÅÄÎØϧ ÕÓÔÁÎÏ×ËÉ ÓÉÓÔÅÍÉ GNU/Linux ÁÂÏ ÓÔ×ÏÒÅΦ ¦ÎÛÏÀ\n"
-"ÐÒÏÇÒÁÍÏÀ ÒÏÚÐÏĦÌÕ ÄÉÓËÕ), ×É ÍÏÖÅÔÅ ÓËÏÒÉÓÔÁÔÉÓÑ ×ÖÅ ÇÏÔÏ×ÉÍÉ\n"
-"ЦÄÒÏÚĦÌÁÍÉ. ÷ ¦ÎÛÏÍÕ ×ÉÐÁÄËÕ, ЦÄÒÏÚĦÌÉ ÎÁ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ ÍÁÀÔØ\n"
-"ÂÕÔÉ ×ÉÚÎÁÞÅÎÉÍÉ ÐÅÒÛ, Î¦Ö ÐÅÒÅÈÏÄÉÔÉ ÄÏ ÕÓÔÁÎÏ×ËÉ.\n"
-"\n"
-"äÌÑ ÓÔ×ÏÒÅÎÎÑ Ð¦ÄÒÏÚÄ¦Ì¦× ×É ÓÐÅÒÛÕ ÍÁ¤ÔÅ ×ÉÂÒÁÔÉ ÖÏÒÓÔËÉÊ ÄÉÓË. ÷É\n"
-"ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÄÉÓË ËÌÁÃÎÕ×ÛÉ ÎÁ \"hda\" (ÑËÝÏ ÍÏ×Á ÊÄÅ ÐÒÏ ÐÅÒÛÉÊ ÄÉÓË\n"
-"ÔÉÐÉ IDE), ÁÂÏ ÎÁ \"hdb\" (ÄÌÑ ÄÒÕÇÏÇÏ ÄÉÓËÕ × ÓÉÓÔÅͦ ÔÉÐÕ IDE), ÁÂÏ ÎÁ\n"
-"\"sda\", ÑËÝÏ ×É ÂÕÄÅÔÅ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÓÉÓÔÅÍÕ ÎÁ ÐÅÒÛÏÍÕ ÄÉÓËÕ ÔÉÐÕ SCSI\n"
-"¦ ÔÁË ÄÁ̦.\n"
-"\n"
-"ýÏ ÒÏÚÐÏĦÌÉÔÉ ÄÉÓË ÎÁ ÒÏÚĦÌÉ, ×É ÍÏÖÅÔÅ ÓËÏÒÉÓÔÁÔÉÓÑ ÃÉÍÉ ÐÕÎËÔÁÍÉ ÍÅÎÀ:\n"
-"\n"
-"* ïÞÉÓÔÉÔÉ ×ÓÅ: ÃÅÊ ÐÕÎËÔ ÓÔÉÒÁ¤ ×Ó¦ ЦÄÒÏÚĦÌÉ ÎÁ ×ÉÂÒÁÎÏÍÕ ÖÏÒÓÔËÏÍÕ "
-"ÄÉÓËÕ.\n"
-"\n"
-"* òÏÚÐÏĦÌÉÔÉ Á×ÔÏÍÁÔÉÞÎÏ: ÃÅÊ ÐÕÎËÔ ÍÅÎÀ ÄÏÐÏÍÏÖÅ ÷ÁÍ Á×ÔÏÍÁÔÉÞÎÏ\n"
-"ÓÔ×ÏÒÉÔÉ Ð¦ÄÒÏÚÄ¦Ì ÔÉÐÕ Ext2 ÔÁ swap ÎÁ צÌØÎÏÍÕ ÐÒÏÓÔÏÒ¦ ÄÉÓËÕ.\n"
-"\n"
-"* ÷¦ÄÎÏ×ÉÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×: ÑËÝÏ ÔÁÂÌÉÃÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÷ÁÛÏÇÏ ÄÉÓËÕ\n"
-"Ú¦ÐÓÏ×ÁÎÁ, ×É ÍÏÖÅÔÅ ÓÐÅÒÛÕ ÓÐÒÏÂÕ×ÁÔÉ ×¦ÄÎÏ×ÉÔÉ §§ ÓËÏÒÉÓÔÕ×Á×ÛÉÓØ\n"
-"ÃÉÍ ÐÕÎËÔÏÍ. âÕÄØ-ÌÁÓËÁ, ÂÕÄØÔÅ-ÏÂÅÒÅÖÎÉÍÉ, ¦ ÐÁÍ'ÑÔÁÊÔÅ, ÝÏ ÃÅÊ ÐÕÎËÔ\n"
-"ÎÅ ÚÁ×ÖÄÉ ÓÐÒÁÃØÏ×Õ¤.\n"
-"\n"
-"* ðÏ×ÅÒÎÕÔÉÓØ: íÏÖÅÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓØ ÃÉÍ, ÝÏ צÄÍÏ×ÉÔÉÓØ ×¦Ä ÚͦÎ,\n"
-"×ÎÅÓÅÎÉÈ ×ÁÍÉ.\n"
-"\n"
-"* ðÅÒÅÞÉÔÁÔÉ: íÏÖÅÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓØ ÃÉÍ, ÝÏ צÄÍÏ×ÉÔÉÓØ ×¦Ä ÚͦÎ,\n"
-"×ÎÅÓÅÎÉÈ ×ÁÍÉ ¦ ÐÅÒÅÐÒÏÞÉÔÁÔÉ ÏÒÉ­¦ÎÁÌØÎÕ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×.\n"
-"\n"
-"\n"
-"* ðÏͦÞÎÉË: ñËÝÏ ×É ÈÏÞÅÔÅ ÓËÏÒÉÓÔÁÔÉÓØ ÐÏͦÞÎÉËÏÍ ÄÌÑ ÒÏÚÐÏĦÌÕ\n"
-"ÄÉÓËÕ. òÅËÏÍÅÎÄÏ×ÁÎÉÊ ÒÅÖÉÍ, ÑËÝÏ ×É ÎÅ ÍÁ¤ÔÅ ÇÌÉÂÏËÉÈ ÚÎÁÎØ ÐÒÏ\n"
-"ÒÏÚÐÏÄ¦Ì ÄÉÓËÕ. \n"
-"\n"
-"* ÷¦ÄÎÏ×ÉÔÉ Ú ÇÎÕÞËÏÇÏ ÄÉÓËÕ: ñËÝÏ ×É ÚÁÐÉÓÁÌÉ ÐÏÐÅÒÅÄÎØÏ Ó×ÏÀ ÔÁÂÌÉÃÀ\n"
-"ЦÄÒÏÚÄ¦Ì¦× ÎÁ ÇÎÕÞËÉÊ ÄÉÓË. úÁÒÁÚ ×É ÍÏÖÅÔŠצÄÎÏ×ÉÔÉ ÃÀ ÔÁÂÌÉÃÀ Ú\n"
-"ÇÎÕÞËÏÇÏ ÄÉÓËÕ.\n"
-"\n"
-"* úÁÐÉÓÁÔÉ ÎÁ ÇÎÕÞËÉÊ ÄÉÓË: ñËÝÏ ×É ÈÏÞÅÔÅ ÚÁÐÉÓÁÔÉ ÚÁÒÁÚ ÔÁÂÌÉÃÀ\n"
-"ЦÄÒÏÚÄ¦Ì¦× ÎÁ ÇÎÕÞËÉÊ ÄÉÓË ÄÌÑ ÔÏÇÏ, ÝÏ §§ ÐÏÔ¦Í ÍÏÖÎÁ ÂÕÌÏ\n"
-"צÄÎÏ×ÉÔÉ Ú ÄÉÓËÅÔÉ. äÕÖÅ ÒÅËÏÍÅÎÄÕ¤ÍÏ ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ ÃÉÍ ÒÅÖÉÍÏÍ. \n"
-"\n"
-"* çÏÔÏ×Ï: ð¦ÓÌÑ ÔÏÇÏ, ÑË ×É ×ÖÅ ÚÁ˦ÎÞÉÌÉ Ú ÐÅÒÅÒÏÚÐÏĦÌÏÍ ÷ÁÛÏÇÏ\n"
-"ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ, ÓËÏÒÉÓÔÁÊÔÅÓØ ÃÉÍ ÐÕÎËÔÏÍ, ÝÏ ÚÁÐÉÓÁÔÉ ÚͦÎÉ ÎÁ\n"
-"ÄÉÓË. \n"
-"\n"
-"ëÏÌÉ ÐÅ×ÎÉÊ Ð¦ÄÒÏÚÄ¦Ì ×ÉÂÒÁÎÏ, ÍÏÖÅÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓØ ËÌÁצÛÁÍÉ:\n"
-"\n"
-"        * Ctrl-c ÝÏ ÓÔ×ÏÒÉÔÉ ÎÏ×ÉÊ Ð¦ÄÒÏÚÄ¦Ì (ÑËÝÏ ×ÉÂÒÁÎÏ ÐÕÓÔÉÊ "
-"ЦÄÒÏÚĦÌ)\n"
-"\n"
-"        * Ctrl-d ÝÏ ÓÔÅÒÔÉ Ð¦ÄÒÏÚĦÌ\n"
-"\n"
-"        * Ctrl-m ÝÏ ×ÉÚÎÁÞÉÔÉ ÔÏÞËÕ ÍÏÎÔÕ×ÁÎÎÑ\n"
-"\n"
-"ñËÝÏ ×É ×ÓÔÁÎÏ×ÌÀ¤ÔÅ ÓÉÓÔÅÍÕ ÎÁ ËÏÍÐ'ÀÔÅÒ Ú ÐÒÏÃÅÓÏÒÏÍ PPC, ×É ÍÏÖÅÔÅ\n"
-"ÓÔ×ÏÒÉÔÉ ÍÁÌÅÎØËÉÊ Ð¦ÄÒÏÚÄ¦Ì ÔÉÐÕ HFS ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ 'bootstrap'\n"
-"(ÒÏÚͦÒÏÍ ÎÅ ÍÅÎÛÅ 1í ÄÌÑ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ yaboot. ñËÝÏ ×É ×ÉÒ¦ÛÉÔÅ\n"
-"ÓÔ×ÏÒÉÔÉ Ð¦ÄÒÏÚÄ¦Ì ÔÒÏÈÉ Â¦ÌØÛÏÇÏ ÒÏÚͦÒÕ (ÓËÁÖ¦ÍÏ 50íÂ, ×É ÚÍÏÖÅÔÅ\n"
-"ÔÁËÏÖ ÚÂÅÒ¦ÇÁÔÉ ÎÁ ÎØÏÍÕ ÒÅÚÅÒ×ÎÅ ÑÄÒÏ ÓÉÓÔÅÍÉ ÔÁ צÒÔÕÁÌØÎÉÊ ÄÉÓË ÄÌÑ\n"
-"Á×ÁÒ¦ÊÎÉÈ ÚÁ×ÁÎÔÁÖÅÎØ ÓÉÓÔÅÍÉ). "
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"îÁ ÷ÁÛÏÍÕ ÄÉÓËÕ ÚÎÁÊÄÅÎÏ Â¦ÌØÛÅ ÏÄÎÏÇÏ Ð¦ÄÒÏÚĦÌÁ, ÝÏ ÎÁÌÅÖÁÔØ\n"
-"ÏÐÅÒÁæÊÎ¦Ê ÓÉÓÔÅͦ ÷¦ÎÄÏ×Ó. ÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÏÄÉÎ Ú ÎÉÈ, ÒÏÚͦÒ\n"
-"ÑËÏÇÏ ÂÉ ×É ÈÏÔ¦ÌÉ ÚͦÎÉÔÉ, ÄÌÑ ÔÏÇÏ ÝÏ ×ÓÔÁÎÏ×ÉÔÉ ÏÐÅÒÁæÊÎÕ ÓÉÓÔÅÍÕ\n"
-"íÁÎÄÒÅÊË ì¦ÎÁËÓ.\n"
-"\n"
-"ëÏÖÅΠЦÄÒÏÚÄ¦Ì ÐÏÄÁÎÏ × ÔÁËÏÍÕ ×ÉÇÌÑĦ: \"îÁÚ×Á × ì¦ÎÁËÓ¦\", \"îÁÚ×Á Õ\n"
-"÷¦ÎÄÏ×Ó\", \"òÏÚͦÒ\".\n"
-"\n"
-"\"îÁÚ×Á × ì¦ÎÁËÓ¦\" ÚÁËÏÄÏ×ÁÎÁ ÔÁËÉÍ ÞÉÎÏÍ: \"ÔÉÐ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\",\n"
-"\"ÎÏÍÅÒ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\", \"ÎÏÍÅÒ Ð¦ÄÒÏÚĦÌÕ ÎÁ ÄÉÓËÕ\", (îÁÐÒÉËÌÁÄ:\n"
-"\"hda1\").\n"
-"\n"
-"ôÉÐ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\" - ÃÅ \"hd\", ÑËÝÏ ×É ÍÁ¤ÔÅ ÄÉÓË ÔÉÐÕ IDE, ¦ \"sd\",\n"
-"ÑËÝÏ ×É ÍÁ¤ÔÅ ÖÏÒÓÔËÉÊ ÄÉÓË ÔÉÐÕ SCSI.\n"
-"\n"
-"\"îÏÍÅÒ ÖÏÒÓËÏÇÏ ÄÉÓËÕ\" - ÃÅ ÚÁ×ÖÄÉ Ì¦ÔÅÒÁ ЦÓÌÑ \"hd\" ÞÉ \"sd\". äÌÑ\n"
-"ÄÉÓË¦× ÔÉÐÕ IDE ÃÅ:\n"
-"\n"
-"    * \"a\" - ÇÏÌÏ×ÎÉÊ ÄÉÓË (master) ÎÁ ÐÅÒÛÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
-"\n"
-"    * \"b\" - ×ÔÏÒÉÎÎÉÊ (slave) ÄÉÓË ÎÁ ÐÅÒÛÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
-"\n"
-"    * \"c\" - ÇÏÌÏ×ÎÉÊ ÄÉÓË ÎÁ ÄÒÕÇÏÍÕ  ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
-"\n"
-"    * \"d\" - ×ÔÏÒÉÎÎÉÊ ÄÉÓË ÎÁ ÄÒÕÇÏÍÕ  ËÏÎÔÒÏÌÅÒ¦ IDE.\n"
-"\n"
-"äÌÑ SCSI ÄÉÓË¦× \"a\" ÏÚÎÁÞÁ¤ \"ÇÏÌÏ×ÎÉÊ ÄÉÓË\", \"b\" - ÄÒÕÇÏÒÑÄÎÉÊ ÄÉÓË, "
-"¦\n"
-"Ô.Ä. ...\n"
-"\n"
-"\"îÁÚ×Á Õ ÷¦ÎÄÏ×Ó\" - Ê̦ÔÅÒÁ ÷ÁÛÏÇÏ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ, ÑË ×É §§ ÂÁÞÉÔÅ\n"
-"ÐÒÉ ÒÏÂÏÔ¦ Õ ÷¦ÎÄÏ×Ó (ÐÅÒÛÉÊ ÄÉÓË ÞÉ Ð¦ÄÒÏÚÄ¦Ì ÎÁÚÉ×Á¤ÔØÓÑ \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "ðÏÔÅÒЦÔØ ÂÕÄØ-ÌÁÓËÁ. ãÅ ÍÏÖÅ ÚÁÊÎÑÔÉ Ë¦ÌØËÁ È×ÉÌÉÎ."
-
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"DrakX ÚÁÐÉÔÁ¤ ÞÉ ÷É ÐÒÏ×ÁÄÉÔÅ ÓÔÁÎÄÁÒÔÎÕ ÕÓÔÁÎÏ×ËÕ (\"òÅËÏÍÅÎÄÏ×ÁÎÁ\")\n"
-"ÞÉ, ÍÏÖÌÉ×Ï, ÈÏÞÅÔÅ ÍÁÔÉ Â¦ÌØÛÉÊ ËÏÎÔÒÏÌØ ÎÁÄ ÔÉÍ, ÝÏ ×ÓÔÁÎÏ×ÌÀ¤ÔØÓÑ\n"
-"(\"åËÓÐÅÒÔ\").  drakX ÚÁÐÉÔÁ¤ ÐÒÏ ËÌÁÓ ÕÓÔÁÎÏ×ËÉ. ôÕÔ ÷É ÍÏÖÅÔÅ ÔÁËÏÖ\n"
-"×ÉÂÒÁÔÉ ÞÉ ÷É ×ÓÔÁÎÏ×ÌÀ¤ÔÅ ÎÏ×Õ ÓÉÓÔÅÍÕ, ÞÉ ÐÏÎÏ×ÌÀ¤ÔÅ ×ÖÅ ¦ÓÎÕÀÞÕ\n"
-"ÓÉÓÔÅÍÕ íÁÎÄÒÅÊË ì¦ÎÁËÓ. ÷ÉÂÅÒ¦ÔØ, ÝÏ ÷ÁÍ Ð¦ÄÈÏÄÉÔØ. ÷É ÍÏÖÅÔÅ\n"
-"×ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ, ÐÏ×ΦÓÔÀ ×ÉÔÅÒÛÉ ÓÔÁÒÕ. ÷É ÍÏÖÅÔÅ ÔÁËÏÖ ÐÏÎÏ×ÉÔÉ\n"
-"×ÖÅ ¦ÓÎÕÀÞÕ ÓÉÓÔÅÍÕ.\n"
-"\n"
-"÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, \"õÓÔÁÎÏ×ËÁ\", ÑËÝÏ ×É ÎÅ ÍÁ¤ÔÅ ÐÏÐÅÒÅÄÎØϧ ×ÅÒÓ¦§\n"
-"íÁÎÄÒÅÊË ì¦ÎÁËÓÁ ×ÓÔÁÎÏ×ÌÅÎÏÇÏ ÎÁ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦ ÁÂÏ ÑËÝÏ ×É ÈÏÞÅÔÅ\n"
-"ÍÁÔÉ Ë¦ÌØËÁ ÏÐÅÒÁæÊÎÉÈ ÓÉÓÔÅÍ.\n"
-"\n"
-"ñËÝÏ ×É ÈÏÞÅÔÅ ÐÏÎÏ×ÉÔÉ ×ÖÅ ×ÓÔÁÎÏ×ÌÅÎÕ ×ÅÒÓ¦À íÁÎÄÒÅÊË ì¦ÎÁËÓÁ ÎÁ\n"
-"Ó×ϤÍÕ ËÏÍÐ'ÀÔÅÒ¦, ×ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, \"ðÏÎÏ×ÌÅÎÎÑ\".\n"
-"\n"
-"÷ ÚÁÌÅÖÎÏÓÔ¦ ×¦Ä ÷ÁÛÏÇÏ Ò¦×ÎÑ ÚÎÁÎØ ÓÉÓÔÅÍÉ GNU/Linux ×É ÍÏÖÅÔÅ\n"
-"×ÉÂÒÁÔÉ ÏÄÉÎ ¦Ú ÎÁÓÔÕÐÎÉÈ Ò¦×Î¦× ÓËÌÁÄÎÏÓÔ¦ ÕÓÔÁÎÏ×ËÉ ÞÉ ÐÏÎÏ×ÌÅÎÎÑ\n"
-"÷ÁÛϧ ÓÉÓÔÅÍÉ íÁÎÄÒÅÊË ì¦ÎÁËÓ:\n"
-"\n"
-" * òÅËÏÍÅÎÄÏ×ÁÎÉÊ: ÷ÉÂÉÒÁÊÔÅ ÃÅÊ ÐÕÎËÔ, ÑËÝÏ ×É Î¦ËÏÌÉ × ÖÉÔÔ¦ ÎÅ\n"
-"×ÓÔÁÎÏ×ÌÀ×ÁÌÉ ÏÐÅÒÁæÊÎϧ ÓÉÓÔÅÍÉ GNU/Linux. õÓÔÁÎÏ×ËÁ ÂÕÄÅ ÄÕÖÅ\n"
-"ÐÒÏÓÔÁ, ¦ ÷ÁÍ ÄÏ×ÅÄÅÔØÓÑ ÄÁÔÉ ×¦ÄÐÏצÄØ Ô¦ÌØËÉ ÎÁ ˦ÌØËÁ ÚÁÐÉÔÁÎØ.\n"
-"\n"
-" * óÐÅæÁÌØÎÉÊ: ñËÝÏ ×É ÄÏÓÔÁÔÎØÏÀ ͦÒÏÀ ÚÎÁÊÏͦ Ú ÏÐÅÒÁæÊÎÏÀ\n"
-"ÓÉÓÔÅÍÏÀ GNU/Linux, ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÏÓÎÏ×ÎÉÊ ÒÅÖÉÍ ×ÉËÏÒÉÓÔÁÎÎÑ ÷ÁÛϧ\n"
-"ÓÉÓÔÅÍÉ (ÒÏÂÏÞÁ ÓÔÁÎæÑ, ÓÅÒ×ÅÒ, ÒÏÚÒÏÂËÁ). ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ\n"
-"צÄÐÏצÓÔÉ ÎÁ ¦ÌØÛÅ ÚÁÐÉÔÁÎØ, Î¦Ö ÐÒÉ ÕÓÔÁÎÏ×æ ÔÉÐÕ\n"
-"\"òÅËÏÍÅÎÄÏ×ÁÎÉÊ\", ÔÏÂÔÏ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÚÎÁÔÉ, ÑË ÐÒÁÃÀ¤ Gnu/Linux, ÝÏÂ\n"
-"×ÉÂÒÁÔÉ ÃÅÊ ËÌÁÓ ÕÓÔÁÎÏ×ËÉ.\n"
-"        \n"
-"        * åËÓÐÅÒÔ: ÑËÝÏ ×É ÍÁ¤ÔÅ ÇÌÉÂÏ˦ ÚÎÁÎÎÑ ÓÉÓÔÅÍÉ GNU/Linux,\n"
-"        ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÃÅÊ ËÌÁÓ ÕÓÔÁÎÏ×ËÉ. ôÁË ÓÁÍÏ, ÑË ¦ × ËÌÁÓ¦\n"
-"        \"óÐÅæÁÌØÎÉÊ\", ×¦Ä ÷ÁÓ ÂÕÄÅ ×ÉÍÁÇÁÔÉÓÑ ×ÉÂÒÁÔÉ ÏÓÎÏ×ÎÉÊ ÔÉÐ\n"
-"        ×ÉËÏÒÉÓÔÁÎÎÑ Ã¦¤§ ÓÉÓÔÅÍÉ (ÒÏÂÏÞÁ ÓÔÁÎæÑ, ÓÅÒ×ÅÒ, ÒÏÚÒÏÂËÁ). "
-"âÕÄØÔÅ\n"
-"        ÄÕÖÅ Õ×ÁÖÎÉÍÉ ×ÉÂÉÒÁÀÞÉ ÃÅÊ ËÌÁÓ ÕÓÔÁÎÏ×ËÉ. ÷É ÚÍÏÖÅÔÅ ×ÉËÏÎÁÔÉ\n"
-"        ÕΦËÁÌØÎÕ ÕÓÔÁÎÏ×ËÕ ÓÉÓÔÅÍÉ. ÷¦ÄÐÏצĦ ÎÁ ÚÁÐÉÔÁÎÎÑ ÍÏÖÕÔØ ÂÕÔÉ "
-"ÄÕÖÅ\n"
-"        ×ÁÖËÉÍÉ, ÑËÝÏ ×É ÎÅ ×ÏÌÏĦ¤ÔÅ ÇÌÉÂÏËÉÍÉ ÚÎÁÎÎÑÍÉ ÓÉÓÔÅÍÉ\n"
-"        GNU/Linux. ïÔÖÅ, ÎÅ ×ÉÂÉÒÁÊÔÅ ÃÅÊ ËÌÁÓ ÕÓÔÁÎÏ×ËÉ, ÑËÝÏ ×É ÎÅ ÐÅ×Φ, "
-"ÝÏ\n"
-"        ÃÅ ÓÁÍÅ ÔÅ, ÝÏ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ. "
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"ú×ÉÞÎÏ drakX ×ÉÂÉÒÁ¤ צÒÎÕ ËÌÁצÁÔÕÒÕ (× ÚÁÌÅÖÎÏÓÔ¦ ×¦Ä ÍÏ×É, ÑËÏÀ ÷É\n"
-"ËÏÒÉÓÔÕ¤ÔÅÓØ) ¦ ÷É ÎÅ ÐÏÂÁÞÉÔÅ ÃØÏÇÏ ËÒÏËÕ. ïÄÎÁË, ÍÏÖÌÉ×Ï, ÷É ÎÅ\n"
-"ÍÁ¤ÔÅ ËÌÁצÁÔÕÒÉ, ÝÏ ÔÏÞÎÏ ×¦ÄÐÏצÄÁ¤ ÷ÁÛ¦Ê ÍÏצ: ÎÁÐÒÉËÌÁÄ, ÑËÝÏ ÷É\n"
-"ÁÇÌÏÍÏ×ÎÉÊ Û×ÅÄ, ÷É ×ÓÅ-ÏÄÎÏ ÍÏÖÅÔÅ ÚÁÂÁÖÁÔÉ ËÏÒÉÓÔÕ×ÁÔÉÓØ Û×ÅÄÓØËÏÀ\n"
-"ËÌÁצÁÔÕÒÏÀ. áÂÏ, ÑËÝÏ ÷É ÇÏ×ÏÒÉÔÅ ÁÎÇ̦ÊÓØËÏÀ, ÁÌÅ ÖÉ×ÅÔÅ × ë×ÅÂÅËÕ,\n"
-"÷É ÐÏÔÒÁÐÌѤÔÅ × ÁÎÁÌÏ­¦ÞÎÕ ÓÉÔÕÁæÀ. ÷ ÏÂÏÈ ×ÉÐÁÄËÁÈ, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
-"ÐÏ×ÅÒÎÕÔÉÓØ ÄÏ ÃØÏÇÏ ÅÔÁÐÕ ÕÓÔÁÎÏ×ËÉ ¦ ×ÉÂÒÁÔÉ ×¦ÄÐÏצÄÎÕ ËÌÁצÁÔÕÒÕ Ú\n"
-"ÎÁÄÁÎÏÇÏ ÓÐÉÓËÕ. ÷ÓÅ, ÝÏ ÐÏÔÒ¦ÂÎÏ, ÃÅ ×ÉÂÒÁÔÉ ÐÏÔÒ¦ÂÎÕ ËÌÁצÁÔÕÒÕ ¦Ú\n"
-"ÓÐÉÓËÕ, ÝÏ Ú'Ñ×ÌѤÔØÓÑ ÐÅÒÅÄ ÷ÁÍÉ.\n"
-"\n"
-"îÁÔÉÓΦÔØ ËÎÏÐËÕ äÏÄÁÔËÏ×Ï ¦ ÷É ÐÏÂÁÞÉÔÅ ÐÏ×ÎÉÊ ÓÐÉÓÏË ÒÏÚËÌÁÄÏË\n"
-"ËÌÁצÁÔÕÒ."
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-"âÕÄØ ÌÁÓËÁ, ×ÉÂÅÒ¦ÔØ ÍÏ×Õ ÄÌÑ ÕÓÔÁÎÏ×ËÕ ÓÉÓÔÅÍÉ ÔÁ ËÏÒÉÓÔÕ×ÁÎÎÑ Ð¦ÓÌÑ\n"
-"ÕÓÔÁÎÏ×ËÉ. \n"
-"\n"
-"ðÒÉÓÕÔÎÑ ÔÁËÏÖ ËÎÏÐËÁ \"äÏÄÁÔËÏ×Ï\", ÑËÁ ÄÏÚ×ÏÌѤ ÷ÁÍ ×ÉÂÒÁÔÉ ¦ÎÛ¦ ÍÏ×É,\n"
-"Ñ˦ ÍÏÖÕÔØ ÂÕÔÉ ÔÁËÏÖ ÕÓÔÁÎÏ×ÌÅÎÉÍÉ × ÓÉÓÔÅͦ. ÷É ÚÍÏÖÅÔÅ\n"
-"ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÃÉÍÉ ÍÏ×ÁÍÉ Ð¦ÓÌÑ ÕÓÔÁÎÏ×ËÉ. ñËÝÏ, ÎÁÐÒÉËÌÁÄ, ÎÁ ÷ÁÛ¦Ê\n"
-"ÍÁÛÉΦ (Õ ÑËϧ ÁÎÇ̦ÊÓØËÁ ×ÓÔÁÎÏ×ÌÅÎÁ ÏÓÎÏ×ÎÏÀ ÍÏ×ÏÀ) ÂÕÄÕÔØ ÐÒÁÃÀ×ÁÔÉ\n"
-"¦ÓÐÁÎæ, ×ÉÂÅÒ¦ÔØ × ÄÏÄÁÔËÏ×ÉÈ ÍÏ×ÁÈ ¶ÓÐÁÎÓØËÁ|¶ÓÐÁΦÑ.\n"
-"\n"
-"ð¦ÓÌÑ ×ÉÂÏÒÕ ÍÏ×É ¦ ЦÄÔ×ÅÒÄÖÅÎÎÑ, ÷É Á×ÔÏÍÁÔÉÞÎÏ ÐÅÒÅÈÏÄÉÔÅ ÄÏ\n"
-"ÎÁÓÔÕÐÎÏÇÏ ËÒÏËÕ."
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"âÕÄØ-ÌÁÓËÁ, ×ÉÂÅÒ¦ÔØ ×¦ÒÎÉÊ ÐÏÒÔ. îÁÐÒÉËÌÁÄ, ÐÏÒÔ Ð¦Ä ÎÁÚ×ÏÀ COM1 Õ MS\n"
-"Windows ÎÏÓÉÔØ ÎÁÚ×Õ ttyS0 Õ GNU/ì¦ÎÁËÓ¦."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"îÁÓÔÕÐÎÅ - ÎÁʦÌØÛ ×ÁÛÌÉ×ÉÊ ËÒÏË Ú ÔÏÞËÉ ÚÏÒÕ ÂÅÚÐÅËÉ ÷ÁÛϧ ÓÉÓÔÅÍÉ\n"
-"GNU/Linux: ×ÉÂ¦Ò ÐÁÒÏÌÑ ÄÌÑ ËÏÒÉÓÔÕ×ÁÞÁ Root. Root - ÃÅ ÓÉÓÔÅÍÎÉÊ\n"
-"ÁÄͦΦÓÔÒÁÔÏÒ ¦ ¤ÄÉÎÁ ÏÓÏÂÁ, ÑË¦Ê ÄÏÚ×ÏÌÅÎÏ ÒÏÂÉÔÉ ÐÏÎÏ×ÌÅÎÎÑ ÓÉÓÔÅÍÉ,\n"
-"ÄÏÄÁ×ÁÔÉ ËÏÒÉÓÔÕ×ÁÞ¦×, ÚͦÎÀ×ÁÔÉ ÚÁÇÁÌØÎÕ ËÏÎƦ­ÕÒÁæÀ ÓÉÓÔÅÍÉ, ÔÁËÅ\n"
-"¦ÎÛÅ. ëÏÒÏÔÛÅ - Root ÍÏÖÅ ×ÓÅ! ïÓØ ÞÏÍÕ ÷ÁÍ ÓÌ¦Ä ×ÉÂÉÒÁÔÉ ÐÁÒÏÌØ, ÑËÉÊ\n"
-"×ÁÖËÏ ×ÇÁÄÁÔÉ, drakX ÓËÁÖÅ ÷ÁÍ, ÑËÝÏ ÐÁÒÏÌØ ÚÁÎÁÄÔÏ ÌÅÇËÉÊ. ñË\n"
-"ÐÏËÁÚÁÎÏ, ÷ÁÍ ÎÅÏÂÏ×'ÑÚËÏ×Ï ××ÏÄÉÔÉ ÐÁÒÏÌØ, ÁÌÅ ÍÉ ÎÁÓÔ¦ÊÌÉ×Ï\n"
-"ÒÅËÏÍÅÎÄÕ¤ÍÏ ÷ÁÍ ×ÓÅ-ÔÁËÉ ×ÉÂÒÁÔÉ ÐÁÒÏÌØ, ÈÏÞÁ Â Ú ÏÄΦ¤§-¤ÖÉÎϧ\n"
-"ÐÒÉÞÉÎÉ: ÎÅ ÄÕÍÁÊÔÅ, ÝÏ ÞÅÒÅÚ ÔÅ, ÝÏ ÷É ÚÁ×ÁÎÔÁÖÉÌÉ GNU/Linux, ÷ÁÛÁ\n"
-"ÓÉÓÔÅÍÁ צÌØÎÁ ×¦Ä ÐÏÍÉÌÏË. ãÅ ÎÅ ÔÁË, ÏÓ˦ÌØËÉ Root ÍÏÖÅ ÐÅÒÅ×ÁÖÉÔÉ\n"
-"×Ó¦ ÚÁÂÏÒÏÎÉ ¦ ÎÅÎÁÒÏËÏÍ ÓÔÅÒÔÉ ×Ó¦ ÄÁΦ ÎÁ ×ÓÉÈ Ð¦ÄÒÏÚĦÌÁÈ\n"
-"Ú×ÅÒÔÁÀÞÉÓØ ÂÅÚÐÏÓÅÒÅÄÎØÏ ÄÏ Ð¦ÄÒÏÚĦ̦×! ôÏÍÕ, ÄÏÓÔÕÐ ÄÏ ÒÁÈÕÎËÕ root\n"
-"ÍÁ¤ ÂÕÔÉ ÚÁÈÉÝÅÎÉÍ.\n"
-"\n"
-"ðÁÒÏÌØ ÍÁ¤ ÂÕÔÉ ÓÕͦÛÛÀ ÁÌÆÁצÔÎÏ-ÃÉÆÒÏ×ÉÈ ÓÉÍ×ÏÌ¦× ¦ ÂÕÔÉ ÚÁ×ÄÏ×ÖËÉ\n"
-"ÈÏÞÁ- 8 ÓÉÍ×Ï̦×. î¦ËÏÌÉ ÎÅ ÚÁÐÉÓÕÊÔÅ ÐÁÒÏÌØ!\n"
-"\n"
-"îÅ ×ÉÂÉÒÁÊÔÅ ÚÁÎÁÄÔÏ ÄÏ×ÇÉÊ ÞÉ ÓËÌÁÄÎÉÊ ÐÁÒÏÌØ. ÷ÁÍ ÊÏÇÏ\n"
-"ÚÁÐÁÍ'ÑÔÏ×Õ×ÁÔÉ.\n"
-"\n"
-"ëÏÌÉ ÷É ÂÕÄÅÔÅ ÄÒÕËÕ×ÁÔÉ ÐÁÒÏÌØ ÎÁ ÅËÒÁΦ, ÊÏÇÏ ÎÅ ÂÕÄÅ ×ÉÄÎÏ. ïÓØ\n"
-"ÞÏÍÕ ÐÒÉ ×ÉÂÏÒ¦ ÐÁÒÏÌÑ, ÷ÁÍ ÚÁÐÒÏÐÏÎÕ¤ÔØÓÑ ××ÅÓÔÉ ÊÏÇÏ Äצަ, ÏÓ˦ÌØËÉ\n"
-"ÐÏÍÉÌËÁ ÐÒÉ ÐÅÒÛÏÍÕ ××ÅÄÅÎΦ ÐÁÒÏÌÑ, ÍÏÖÅ ÂÕÔÉ ÐÒÏÂÌÅÍÏÀ: ÐÒÉ\n"
-"ÒŤÓÔÒÁæ§ × ÓÉÓÔÅͦ ÷ÁÍ ÔÒÅÂÁ ÂÕÄÅ ËÏÒÉÓÔÕ×ÁÔÉÓØ \"ÎÅצÒÎÉÍ\" ÐÁÒÏÌÅÍ.\n"
-"\n"
-"÷ ÅËÓÐÅÒÔÎÏÍÕ ÒÅÖÉͦ, Õ ÷ÁÓ ÂÕÄÅ ÍÏÖÌÉצÓÔØ ×ËÁÚÁÔÉ, ÞÉ ÷É ÂÕÄÅÔÅ\n"
-"ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÑËÉÍ-ÎÅÂÕÄØ ÓÅÒ×ÅÒÏÍ Á×ÔÅÎÔÉËÁæ§: NIS ÞÉ LDAP.\n"
-"\n"
-"ñËÝÏ ÷É ËÏÒÉÓÔÕ¤ÔÅÓØ NIS'ÏÍ (ÞÉ LDAP) ×ÉÂÅÒ¦ÔØ ÏÐæÀ \"ëÏÒÉÓÔÕ×ÁÔÉÓØ\n"
-"NIS'ÏÍ\" (\"LDAP\").  ñËÝÏ ÷É ÎÅ ÚÎÁ¤ÔÅ ÃØÏÇÏ, ÚÁÐÉÔÁÊÔÅ × Ó×ÏÇÏ\n"
-"ÓÉÓÔÅÍÎÏÇÏ ÁÄͦΦÓÔÒÁÔÏÒÁ.\n"
-"\n"
-"ñËÝÏ ËÏÍÐ'ÀÔÅÒ ÎŠЦÄËÌÀÞÅÎÉÊ ÄÏ ÍÅÒÅÖ¦, ×ÉÂÅÒ¦ÔØ ìÏËÁÌØΦ ÆÁÊÌÉ ÄÌÉ\n"
-"Á×ÔÅÎÔÉËÁæ§.."
-
-#: ../../help.pm_.c:600
-#, fuzzy
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-"LILO ¦ GRUB - ÃÅ ÚÁ×ÁÎÔÁÖÕ×ÁÞ¦ ÓÉÓÔÅÍÉ ÄÌÑ GNU/Linux. ãÅÊ ËÒÏË Ú×ÉÞÎÏ\n"
-"ÐÏ×ΦÓÔÀ Á×ÔÏÍÁÔÉÚÏ×ÁÎÉÊ. æÁËÔÉÞÎÏ, drakX ÐÒÏ×ÅÄÅ ÁÎÁ̦Ú\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÏÇÏ ÓÅËÔÏÒÁ ÄÉÓËÕ ¦ ÂÕÄŠĦÑÔÉ ×¦ÄÐÏצÄÎÏ ÄÏ ÔÏÇÏ, ÝÏ ×\n"
-"ÎØÏÍÕ ×ÉÑ×ÉÔØÓÑ:\n"
-"\n"
-" * ÑËÝÏ ÔÕÔ ÐÒÉÓÕÔÎ¦Ê ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ ÓÅËÔÏÒ Windows, צΠÚÁͦÎÉÔØ\n"
-"ÊÏÇÏ ÎÁ ÓÅËÔÏÒ GRUB/LILO ÔÁËÉÍ ÞÉÎÏÍ, ÝÏ ÷É ÍÏÇÌÉ ÓÔÁÒÔÕ×ÁÔÉ ÏÂϤ - ¦\n"
-"GNU/Linux, ¦ Windows;\n"
-"\n"
-" * ÑËÝÏ ÚÎÁÊÄÅÎÉÊ ÂÌÏË ×¦Ä GRUB ÞÉ LILO, צΠÂÕÄÅ ÚÁͦÎÅÎÉÊ ÎÁ ÎÏ×ÉÊ. \n"
-"\n"
-"ñËÝÏ ÓÉÔÕÁÃ¦Ñ ÎÅ ÔÁËÁ Þ¦ÔËÁ, drakX ÚÁÐÒÏÐÏÎÕ¤ ÷ÁÍ ×ÉÂ¦Ò Ú Ë¦ÌØËÏÍÁ\n"
-"ÍÏÖÌÉ×ÉÍÉ ×ÉÈÏÄÁÍÉ. \n"
-"\n"
-" * ñËÉÊ ÚÁ×ÁÎÔÁÖÕ×ÁÞ ×ÖÉ×ÁÔÉ: ÷É ÍÁ¤ÔÅ ÔÒÉ ×ÁÒ¦ÁÎÔÉ ÎÁ ×ɦÒ:\n"
-"   \n"
-"   * LILO Ú ÇÒÁƦÞÎÉÍ ÍÅÎÀ: ÑËÝÏ ÷É ÎÁÄÁ¤ÔÅ ÐÅÒÅ×ÁÇÕ LILO Ú ÊÏÇÏ\n"
-"     ÇÒÁƦÞÎÏÀ ÏÂÏÌÏÎËÏÀ.\n"
-"\n"
-"   * Grub: ÑËÝÏ ÷ÁÍ ÐÏÄÏÂÁ¤ÔØÓÑ Grub (Ú ÔÅËÓÔÏ×ÉÍ ÍÅÎÀ).\n"
-"\n"
-"   * LILO Ú ÔÅËÓÔÏ×ÉÍ ÍÅÎÀ: ÑËÝÏ ÷ÁÍ ÐÏÄÏÂÁ¤ÔØÓÑ LILO Ú ÔÅËÓÔÏ×ÉÍ\n"
-"     ÍÅÎÀ.\n"
-"\n"
-" * ðÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ: Õ Â¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× ÷ÁÍ ÎÅ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ\n"
-"ÚͦÎÀ×ÁÔÉ ÎÅÑ×ÎÏ ×ÓÔÁÎÏ×ÌÅÎÉÊ ÄÉÓË (/dev/hda), ÁÌÅ ÑËÝÏ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ,\n"
-"÷É ÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÚÁ×ÁÎÔÁÖÕ×ÁÞ ÎÁ ÄÒÕÇÏÍÕ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ\n"
-"(/dev/hdb) ÞÉ ÎÁצÔØ ÎÁ ÄÉÓËÅÔ¦ (/de/fd0). \n"
-"\n"
-" * úÁÔÒÉÍËÁ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ ÏÓÎÏ×ÎÏÇÏ ÑÄÒÁ: ÃÅ ÚÁÔÒÉÍËÁ ÐÒÉ\n"
-"ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ, ÑËÁ ÎÁÄÁ¤ÔØÓÑ ËÏÒÉÓÔÕ×ÁÞÅצ, ÝÏ צΠÍÁ×\n"
-"ÍÏÖÌÉצÓÔØ ×ÉÂÒÁÔÉ ¦ÎÛÉÊ ÐÕÎËÔ × ÍÅÎÀ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ.\n"
-"\n"
-"!! âÕÄØÔÅ Õ×ÁÖÎÉÍÉ: ÑËÝÏ ÷É ÎÁÔÉÓÎÅÔÅ ËÎÏÐËÕ \"÷¦ÄͦÎÉÔÉ\" (¦ ÔÉÍ ÓÁÍÉÍ\n"
-"×ËÁÖÅÔÅ ÐÒÏÇÒÁͦ ÎÅ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÓÉÓÔÅÍÎÏÇÏ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ),\n"
-"ÐÅÒÅÓצÄÞ¦ÔØÓÑ, ÝÏ ÷É ÍÁ¤ÔÅ Õ ÚÁÐÁÓ¦ ÍÅÔÏÄ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ\n"
-"íÁÎÄÒÅÊË ì¦ÎÁËÓ! âÕÄØÔÅ ÔÁËÏÖ ÐÅ×ÎÉÍÉ, ÝÏ ÷É ÄÏÂÒÅ ÚÎÁ¤ÔÅ, ÝÏ ÷É\n"
-"ÒÏÂÉÔÉ, ËÏÌÉ ÷É ÚͦÎÀ¤ÔÅ ÂÕÄØ-Ñ˦ ÐÁÒÁÍÅÔÒÉ ÔÕÔ!!\n"
-"\n"
-"îÁÔÉÓÎÕ×ÛÉ ËÎÏÐËÕ \"äÏÄÁÔËÏ×Ï\" × ÃØÏÍÕ ×¦ËΦ, ÷É ÏÔÒÉÍÁ¤ÔÅ ÄÏÓÔÕÐ ÄÏ\n"
-"ÂÁÇÁÔØÏÈ ÄÏÄÁÔËÏ×ÉÈ ËÏÎƦ­ÕÒÁæÊÎÉÈ ÐÁÒÁÍÅÔÒ¦× ÐÒÉÚÎÁÞÅÎÉÈ ÄÌÑ\n"
-"ÄÏÓצÄÞÅÎÉÈ ËÏÒÉÓÔÕ×ÁÞ¦×.\n"
-"\n"
-"íÁÎÄÒÅÊË ì¦ÎÁËÓ ×ÓÔÁÎÏ×ÌÀ¤ Ó×¦Ê ×ÌÁÓÎÉÊ ÓÉÓÔÅÍÎÉÊ ÚÁ×ÁÎÔÁÖÕ×ÁÞ, ÑËÉÊ\n"
-"ÄÏÚ×ÏÌÉÔØ ÷ÁÍ ÚÁ×ÁÎÔÁÖÕ×ÁÔÉ ÁÂÏ GNU/Linux, ÁÂÏ ÂÕÄØ-ÑËÕ ¦ÎÛÕ\n"
-"ÏÐÅÒÁæÊÎÕ ÓÉÓÔÅÍÕ, ×ÓÔÁÎÏ×ÌÅÎÕ ÎÁ Ã¦Ê ÍÁÛÉΦ.\n"
-"\n"
-"ñËÝÏ ÎÁ ÍÁÛÉΦ ×ÓÔÁÎÏ×ÌÅÎÁ ¦ÎÛÁ ÏÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ, ×ÏÎÁ Á×ÔÏÍÁÔÉÞÎÏ\n"
-"ÂÕÄÅ ÄÏÄÁÎÁ ÄÏ ÓÐÉÓËÕ ÓÉÓÔÅÍ × ÍÅÎÀ. ôÕÔ ÍÏÖÎÁ ÚͦÎÉÔÉ ¦ÓÎÕÀÞ¦\n"
-"ÐÁÒÁÍÅÔÒÉ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ËÏÖÎϧ ÓÉÓÔÅÍÉ. ðÏÄצÊÎÅ ËÌÁÃÁÎÎÑ ÎÁ ÐÕÎËÔ¦\n"
-"ÍÅÎÀ ÄÏÚ×ÏÌÉÔØ ÷ÁÍ ÚͦÎÉÔÉ ¦ÓÎÕÀÞ¦ ÐÁÒÁÍÅÔÒÉ, ÁÂÏ ÓÔÅÒÔÉ ÄÁÎÉÊ ÐÕÎËÔ\n"
-"ÍÅÎÀ. \"äÏÄÁÔÉ\" ÓÔ×ÏÒÀÖ ÎÏ×ÉÊ ÐÕÎËÔ. ¶ \"úÁ˦ÎÞÅÎÏ\" ÐÅÒÅÈÏÄÉÔØ ÎÁ\n"
-"ÎÁÓÔÕÐÎÉÊ ËÒÏË ÕÓÔÁÎÏ×ËÉ."
-
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader - ÚÁ×ÁÎÔÁÖÕ×ÁÞ ì¦ÎÁËÓÁ) ÔÁ Grub -- ÃÅ\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÞ¦ ÓÉÓÔÅÍÉ: ×ÏÎÉ ÍÏÖÕÔØ ÚÁ×ÁÎÔÁÖÉÔÉ ÁÂÏ GNU/ì¦ÎÁËÓ ÁÂÏ\n"
-"ÂÕÄØ-ÑËÕ ¦ÎÛÕ ÏÐÅÒÁæÊÎÕ ÓÉÓÔÅÍÕ ÎÁ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦. úÁ ÎÏÒÍÁÌØÎÉÈ\n"
-"ÕÍÏ× Ã¦ ÏÐÅÒÁæÊΦ ÓÉÓÔÅÍÉ ×¦ÒÎÏ ×ÉÚÎÁÞÁÀÔØÓÑ ÔÁ ×ÓÔÁÎÏ×ÌÀÀÔØÓÑ. ñËÝÏ\n"
-"ÃÅ ÎÅ ÔÁË, ×É ÍÏÖÅÔÅ ÄÏÄÁÔÉ ÐÏÔÒ¦ÂÎÉÊ ÐÕÎËÔ ÓÁÍÏÓÔ¦ÊÎÏ. õ×ÁÖÎÏ\n"
-"×ÉÂÅÒ¦ÔØ ÐÏÔÒ¦ÂΦ ÐÁÒÁÍÅÔÒÉ.\n"
-"\n"
-"\n"
-"÷É, ÍÏÖÌÉ×Ï, ÔÁËÏÖ ÚÁÈÏÞÅÔÅ ÚÁËÒÉÔÉ ÄÏÓÔÕÐ ÄÏ ÃÉÈ ÏÐÅÒÁæÊÎÉÈ ÓÉÓÔÅÍ\n"
-"¦ÎÛÉÍ, × ÃØÏÍÕ ×ÉÐÁÄËÕ ×É ÍÏÖÅÔÅ ÓÔÅÒÔÉ ×¦ÄÐÏצÄΦ ÐÕÎËÔÉ × ÆÁÊ̦\n"
-"ËÏÎƦ­ÕÒÁæ§. áÌÅ × ÃØÏÍÕ ×ÉÐÁÄËÕ ÷ÁÍ ÐÏÔÒ¦ÂÎÁ ÂÕÄÅ ÓÐÅæÁÌØÎÁ\n"
-"ÄÉÓËÅÔÁ, ÝÏ ÚÁ×ÁÎÔÁÖÉÔÉ Ã¦ ÓÉÓÔÅÍÉ!"
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"÷É ÐÏ×ÉÎΦ ×ËÁÚÁÔÉ, ÄÅ ÓÁÍÅ ×É ÈÏÞÅÔÅ ÚÁÐÉÓÁÔÉ ¦ÎÆÏÒÍÁæÀ ÐÏÔÒ¦ÂÎÕ\n"
-"ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ GNU/ì¦ÎÁËÓÁ.\n"
-"\n"
-"\n"
-"ëÒ¦Í ÔÏÇÏ ×ÉÐÁÄËÕ, ËÏÌÉ ×É ÁÂÓÏÌÀÔÎÏ ×ÐÅ×ÎÅΦ × ÔÏÍÕ, ÝÏ ×É ÒÏÂÉÔÅ,\n"
-"×ÉÂÅÒ¦ÔØ \"ðÅÒÛÉÊ ÓÅËÔÏÒ ÄÉÓËÕ (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX ÓÐÒÏÂÕ¤ צÄÛÕËÁÔÉ ×Ó¦ ÖÏÒÓÔ˦ ÄÉÓËÉ Õ ÓÉÓÔÅͦ ¦ ÏÄÎÏÞÁÓÎÏ\n"
-"צÄÛÕËÁÔÉ ÐÌÁÔÉ PCI SCSI.  ñËÝÏ DrakX ÚÎÁÊÄÅ ÐÌÁÔÕ SCSI ¦ ÚÎÁ¤ ÑËÉÊ\n"
-"ÄÒÁÊ×ÅÒ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ Ú Ã¦¤À ÐÌÁÔÏÀ, צΠÁ×ÔÏÍÁÔÉÞÎÏ ×ÓÔÁÎÏ×ÉÔØ ÃÅÊ\n"
-"ÄÒÁÊ×ÅÒ (æ ÄÒÁÊ×ÅÒÉ).\n"
-"\n"
-"÷ ÄÅÑËÉÈ ×ÉÐÁÄËÁÈ ÎÅ ×ÓÑ ÁÐÁÒÁÔÕÒÁ ÒÏÚЦÚÎÁ¤ÔØÓÑ ÐÏ×ΦÓÔÀ. ñËÝÏ ×É ÎÅ\n"
-"ÍÁ¤ÔÅ ÐÌÁÔÉ SCSI, ÍÁ¤ÔÅ ISA SCSI ÐÌÁÔÕ, ÁÂÏ PCI SCSI ÐÌÁÔÕ, ÑËÁ ÎÅ\n"
-"ÒÏÚЦÚÎÁ¤ÔØÓÑ DrakX, ÷ÁÍ ÂÕÄÅ ÚÁÄÁÎÅ ÚÁÐÉÔÁÎÎÑ, ÐÒÏ ÔÅ ÞÉ ¤ Õ ÷ÁÛ¦Ê\n"
-"ÓÉÓÔÅͦ SCSI ÐÌÁÔÁ. ñËÝÏ ÔÁËϧ ÐÌÁÔÉ Õ ÷ÁÓ ÎÅÍÁ¤, ÐÒÏÓÔÏ ËÌÁÃΦÔØ ÎÁ\n"
-"\"î¦\". ñËÝÏ ×É ËÌÁÃÎÅÔÅ ÎÁ \"ôÁË\", ÷ÁÍ ÂÕÄÅ ÎÁÄÁÎÏ ÓÐÉÓÏË ÄÒÁÊ×ÅÒ¦×, Ú\n"
-"ÑËÏÇÏ ÷ÁÍ ÔÒÅÂÁ ×ÉÂÒÁÔÉ ÐÏÔÒ¦ÂÎÉÊ.\n"
-"\n"
-"ñËÝÏ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ×ÒÕÞÎÕ ×ÉÂÉÒÁÔÉ ÄÒÁÊ×ÅÒ, DrakX ÚÁÐÉÔÁ¤ Õ ÷ÁÓ,\n"
-"ÞÉ ×É ÈÏÞÅÔÅ ×ËÁÚÁÔÉ Ñ˦ÓØ ÐÅ×Φ ÏÐæ§ ÄÌÑ ÄÒÁÊ×ÅÒÁ. ëÒÁÝÅ, ÑËÝÏ ÷É\n"
-"ÄÏÚ×ÏÌÉÔÅ DrakX ×ÉÐÒÏÂÕ×ÁÔÉ ÐÌÁÔÕ, ÝÏ ×ÉÚÎÁÞÉÔÉ ÐÏÔÒ¦ÂΦ\n"
-"ÏÐæ§. ú×ÉÞÎÏ ÃÅ ÐÒÁÃÀ¤ ÎÏÒÍÁÌØÎÏ.\n"
-"\n"
-"ñËÝÏ ÃÅ ÎÅ ÓÐÒÁÃÀ¤, ÷ÁÍ ÓÌ¦Ä ×ËÁÚÁÔÉ ÐÏÔÒ¦ÂΦ ÏÐæ§ ÄÌÑ\n"
-"ÄÒÁÊ×ÅÒÁ. ðÅÒÅÇÌÑÎØÔÅ \"ðÏÓ¦ÂÎÉË ÐÏ ÕÓÔÁÎÏ×æ\" (òÏÚÄ¦Ì 3, ЦÄÒÏÚĦÌ\n"
-"\"úÎÁÈÏÄÖÅÎÎÑ ¦ÎÆÏÒÍÁæ§ ÐÒÏ ÷ÁÛÕ ÁÐÁÒÁÔÕÒÕ\"), Ú ÄÏËÕÍÅÎÔÁæ§ ÐÏ\n"
-"ÁÐÁÒÁÔÎÏÍÕ ÚÁÂÅÚÐÅÞÅÎÎÀ ÁÂÏ Ú ÄÏÍÁÛÎØϧ ÓÔÏÒ¦ÎËÉ ×ÉÒÏÂÎÉËÁ ÁÐÁÒÁÔÕÒÉ\n"
-"ÁÂÏ Ä¦ÚÎÁÊÔÅÓÑ ÐÏÔÒ¦ÂΦ ÐÁÒÁÍÅÔÒÉ Ú Windows (ÑËÝÏ ×É ÍÁ¤ÔÅ ÃÀ ÓÉÓÔÅÍÕ\n"
-"ÎÁ Ó×ϤÍÕ ËÏÍÐ'ÀÔÅÒ¦)."
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"íÏÖÅÔÅ ÄÏÄÁÔÉ ÄÏÄÁÔËÏצ ÐÕÎËÔÉ ÄÌÑ yaboot, ÁÂÏ ÄÌÑ ÏÐÅÒÁæÊÎÉÈ ÓÉÓÔÅÍ,\n"
-"¦ÎÛÉÈ ÑÄÅÒ ÞÉ ÄÌÑ Á×ÁÒ¦ÊÎÏÇÏ ÏÂÒÁÚÕ ÚÁ×ÁÎÔÁÖÅÎÎÑ.\n"
-"\n"
-"äÌÑ ¦ÎÛÉÈ ïó - ÐÕÎËÔ ÓËÌÁÄÁ¤ÔØÓÑ Ô¦ÌØËÉ Ú ÅÔÉËÅÔËÉ ÔÁ ЦÄÒÏÚĦÌÕ ÄÌÑ\n"
-"ËÏÒÅÎÅ×ϧ ÆÁÊÌÏ×ϧ ÓÉÓÔÅÍÉ.\n"
-"\n"
-"äÌÑ ì¦ÎÁËÓÁ ¤ ˦ÌØËÁ ÍÏÖÌÉ×ÉÈ ÐÁÒÁÍÅÔÒ¦×: \n"
-"\n"
-"  * åÔÉËÅÔËÁ: ÃÅ ÐÒÏÓÔÏ ÎÁÚ×Á, ÑËÕ ×É ÍÁ¤ÔÅ ÎÁÄÒÕËÕ×ÁÔÉ ÐÒÉ ÚÁÐÒÏÛÅÎΦ\n"
-"yaboot, ÝÏ ×ÉÂÒÁÔÉ ÃÀ ÏÐæÀ ÚÁ×ÁÎÔÁÖÅÎÎÑ.\n"
-"\n"
-"  * ïÂÒÁÚ: ÃÅ - ÎÁÚ×Á ÑÄÒÁ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ. õ ¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× - ÃÅ\n"
-"vmlinux ÁÂÏ ×ÁÒ¦ÁÎÔÉ ÎÁÚ×É Ú Ò¦ÚÎÉÍÉ ÒÏÚÛÉÒÅÎÎÑÍÉ.\n"
-"\n"
-"  * ëÏÒÅÎÅ×Á ÆÁÊÌÏ×Á ÓÉÓÔÅÍÁ: ÐÒÉÓÔÒ¦Ê ÄÌÑ ËÏÒÅÎÅ×ϧ ÆÁÊÌÏ×ϧ ÓÉÓÔÅÍÉ,\n"
-"ÁÂÏ '/' ×ÁÛϧ ÓÉÓÔÅÍÉ ì¦ÎÁËÓ.\n"
-"\n"
-"\n"
-"  * äÏÄÁÔÉ: ÎÁ ÁÐÁÒÁÔÎÏÍÕ ÚÁÂÅÚÐÅÞÅÎΦ Apple ÄÏÓÉÔØ ÞÁÓÔÏ\n"
-"×ÉËÏÒÉÓÔÏ×ÕÀÔØÓÑ ÄÏÄÁÔËÏצ ÐÁÒÁÍÅÔÒÉ ÄÌÑ ¦Î¦Ã¦Á̦ÚÁæ§ צÄÅÏ-ÐÌÁÔÉ ÁÂÏ\n"
-"ÄÌÑ ÔÏÇÏ, ÝÏ ¦Î¦Ã¦Á̦ÚÕ×ÁÔÉ ËÌÁצÁÔÕÒÎÕ ÅÍÕÌÑæÀ ËÌÁ×¦Û ÍÉÛËÉ, ÞÅÒÅÚ\n"
-"ÔÅ, ÝÏ ÎÁ ÓÔÁÎÄÁÒÔÎ¦Ê ÍÉÛæ Apple ÎÅÍÁ¤ 2-§ ¦ 3-§ ËÌÁצۦ. äÁ̦ ÐÏÄÁΦ\n"
-"ÄÅÑ˦ ÐÒÉËÌÁÄÉ: \n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"        video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-"\n"
-"  * Initrd: ÃÅÊ ÐÁÒÁÍÅÔÒ ÍÏÖÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÄÌÑ ÔÏÇÏ, ÝÏÂ\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÔÉ ÍÏÄÕ̦ ÄÏ ÔÏÇÏ, ÑË ÐÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ ÄÏÓÔÕÐÎÉÊ, ÁÂÏ\n"
-"ÝÏ ÐÒÏÞÉÔÁÔÉ ×¦ÒÔÕÁÌØÎÉÊ ÄÉÓË ÄÌÑ Á×ÁÒ¦ÊÎÏÇÏ ÚÁ×ÁÎÔÁÖÅÎÎÑ.\n"
-"\n"
-"  * òÏÚÍ¦Ò initrd: ÓÔÁÎÄÁÒÔÎÉÊ ×¦ÒÔÕÁÌØÎÉÊ ÄÉÓË ÍÁ¤ ÒÏÚÍ¦Ò 4096 ÂÁÊÔ,\n"
-"ÑËÝÏ ×ÁÍ ÐÏÔÒ¦ÂÅÎ ÄÉÓË Â¦ÌØÛÏÇÏ ÒÏÚͦÒÕ, ÍÏÖÅÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ ÃÉÍ\n"
-"ÐÁÒÁÍÅÔÒÏÍ.\n"
-"\n"
-"  * úÁÐÉÓ/ÞÉÔÁÎÎÑ: Ú×ÉÞÎÏ ËÏÒÅÎÅ×Á ÆÁÊÌÏ×Á ÓÉÓÔÅÍÁ ÍÏÎÔÕ¤ÔØÓÑ × ÒÅÖÉͦ\n"
-"Ô¦ÌØËÉ ÄÌÑ ÞÉÔÁÎÎÑ, ÄÌÑ ÔÏÇÏ, ÝÏ ÍÁÔÉ ÍÏÖÌÉצÓÔØ ÐÒÏ×ÅÓÔÉ ÐÅÒÅצÒËÕ\n"
-"ÆÁÊÌÏ×ϧ ÓÉÓÔÅÍÉ ÐÅÒÛ, Î¦Ö ÓÉÓÔÅÍÁ ÚÁ×ÁÎÔÁÖÕ¤ÔØÓÑ × ÒÏÂÏÞÉÊ ÒÅÖÉÍ. ãÅ\n"
-"ÍÏÖÎÁ צÄͦÎÉÔÉ ÔÕÔ.\n"
-"\n"
-"  * âÅÚ÷¦ÄÅÏ: Õ ×ÉÐÁÄËÕ, ËÏÌÉ ×¦ÄÅÏ ÐÌÁÔÁ Apple ×ÉÑ×ÉÔØÓÑ ÏÓÏÂÌÉ×Ï\n"
-"ÐÒÏÂÌÅÍÁÔÉÞÎÏÀ, ×É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÃÅÊ ÐÁÒÁÍÅÔÒ ÄÌÑ ÔÏÇÏ, ÝÏÂ\n"
-"ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ ÓÔÁÎÄÁÒÔÎÉÍ framebuffer'ÏÍ.\n"
-"\n"
-"  * óÔÁÎÄÁÒÎÁ: ÓÉÓÔÅÍÁ ×ÉÂÒÁÎÁ × ÃØÏÍÕ ÐÕÎËÔ¦ ÚÁ×ÁÎÔÁÖÉÔØÓÑ ÚÒÁÚÕ\n"
-"ЦÓÌÑ ÔÏÇÏ, ÑË ×É ÎÁÔÉÓÎÅÔÅ ENTER ÎÁ ÚÁÐÒÏÛÅÎΦ yaboot. ãÅÊ ÐÕÎËÔ ÂÕÄÅ\n"
-"ÔÁËÏÖ ÐÏËÁÚÁÎÉÊ ÓÉÍ×ÏÌÏÍ *, ÑËÝÏ ×É ÎÁÔÉÓÎÅÔÅ TAB, ÝÏ ÐÏÄÉ×ÉÔÉÓÑ\n"
-"ÓÐÉÓÏË ÓÉÓÔÅÍ. "
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot - ÃÅ ÚÁ×ÁÎÔÁÖÕ×ÁÞ ÓÉÓÔÅÍÉ ÄÌÑ íÁ˦ÎÔÏÛ¦× îÏ×ÏÇÏ ÔÉÐÕ. ÷¦Î ÍÏÖÅ\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÔÉ ÂÕÄØ-ÑËÕ ¦Ú ÓÉÓÔÅÍ: GNU/Linux, MacOS, MacOSX, ÑËÝÏ ×¦Î\n"
-"×ÓÔÁÎÏ×ÌÅÎÉÊ × ÓÉÓÔÅͦ. ÷ ¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× Ã¦ ÓÉÓÔÅÍÉ ×¦ÒÎÏ\n"
-"×ÉÚÎÁÞÁÀÔØÓÑ ¦ ×ÓÔÁÎÏ×ÌÀÀÔØÓÑ. ñËÝÏ ÃÅ ÎÅ ÔÁË - ÍÏÖÅÔÅ ÄÏÄÁÔÉ ÐÕÎËÔ\n"
-"×ÒÕÞÎÕ ÎÁ ÃØÏÍÕ ÅËÒÁΦ. âÕÄØÔÅ Õ×ÁÖΦ ÐÒÉ ×ÉÂÏÒ¦ ËÏÒÅËÔÎÉÊ\n"
-"ÐÁÒÁÍÅÔÒ¦×. \n"
-"\n"
-"ïÓÎÏ×Φ ÐÁÒÁÍÅÔÒÉ Yaboot:\n"
-"\n"
-"   * ðÏצÄÏÍÌÅÎÎÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ: ÐÒÏÓÔÅ ÔÅËÓÔÏ×Å ÐÏצÄÏÍÌÅÎÎÑ, ÑËÅ\n"
-"ÄÅÍÏÎÓÔÒÕ¤ÔØÓÑ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ.\n"
-"\n"
-"  * ðÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ: ×ËÁÚÕ¤ ÎÁ ÔÅ, ÄÅ ÓÁÍÅ ÚÁÐÉÓÕ¤ÔØÓÑ\n"
-"¦ÎÆÏÒÍÁÃ¦Ñ ÐÏÔÒ¦ÂÎÁ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ GNU/Linux. úÁÇÁÌÏÍ, ×ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
-"ÎÁÚÎÁÞÉÔÉ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ Ð¦ÄÒÏÚÄ¦Ì ÄÌÑ ÔÏÇÏ, ÝÏ ÚÂÅÒ¦ÇÁÔÉ ÃÀ\n"
-"¦ÎÆÏÒÍÁæÀ. \n"
-"\n"
-"  * úÁÔÒÉÍËÁ Open Firmware: ÎÁ צÄͦÎÕ ×¦Ä Lilo, ÔÕÔ ¤ Äצ Ò¦ÚÎÉÈ\n"
-"ÐÅÒ¦ÏÄÉ ÚÁÔÒÉÍËÉ × Yaboot. ðÅÒÛÉÊ ÐÅÒ¦ÏÄ ÚÁÔÒÉÍËÉ ×ÉͦÒÀ¤ÔØÓÑ ×\n"
-"ÓÅËÕÎÄÁÈ. ð¦Ä ÞÁÓ ÃØÏÇÏ ÐÅÒ¦ÏÄÕ ÚÁÔÒÉÍËÉ ×É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÚצÄËÉ\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÔÉÓÑ: Ú ËÏÍÐÁËÔ-ÄÉÓËÕ, OF, MacOS ÞÉ ì¦ÎÁËÓ.\n"
-"\n"
-"  * ðÅÒ¦ÏÄ ÚÁÔÒÉÍËÉ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ ÑÄÒÁ: ÃÅÊ ÐÅÒ¦ÏÄ ÐÏĦÂÎÉÊ ÄÏ\n"
-"ÚÁÔÒÉÍËÉ Lilo. ð¦ÓÌÑ ×ÉÂÏÒÕ ì¦ÎÁËÓÁ, ÚÁÔÒÉÍËÁ ÏÂÞÉÓÌÀ¤ÔØÓÑ × ÄÅÓÑÔÉÈ\n"
-"ÓÅËÕÎÄÉ ÐÅÒÛ, Î¦Ö ÐÏÞÎÅ ÚÁ×ÁÎÔÁÖÕ×ÁÔÉÓÑ ÓÔÁÎÄÁÒÔÎÅ ÑÄÒÏ.\n"
-"\n"
-"  * äÏÚ×ÏÌÉÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ Ú ËÏÍÐÁËÔ-ÄÉÓËÕ?: ÑËÝÏ ÃÅÊ ÐÁÒÁÍÅÔÒ\n"
-"×ÉÂÒÁÎÏ, ×É ÍÏÖÅÔÅ ÎÁÔÉÓÎÕÔÉ 'C' ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ Ð¦Ä ÞÁÓ ÐÅÒÛÏÇÏ\n"
-"ÐÅÒ¦ÏÄÕ ÚÁÔÒÉÍËÉ.\n"
-"\n"
-"  * äÏÚ×ÏÌÉÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ OF: ÑËÝÏ ×É ×ÉÂÅÒÅÔÅ ÃÅÊ ÐÁÒÁÍÅÔÒ, ×É\n"
-"ÚÍÏÖÅÔÅ ÎÁÔÉÓÎÕÔÉ 'N' Ð¦Ä ÞÁÓ ÐÅÒÛÏÇÏ ÐÅÒ¦ÏÄÕ ÚÁÔÒÉÍËÉ ÄÌÑ\n"
-"ÚÁ×ÁÎÔÁÖÅÎÎÑ Ú Open Firmware.\n"
-"\n"
-"  * óÔÁÎÄÁÒÔÎÁ ïó: ÃÉÍ ×É ÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÓÔÁÎÄÁÒÔÎÕ ÓÉÓÔÅÍÕ, ÑËÁ\n"
-"ÚÁ×ÁÎÔÁÖÉÔØÓÑ Ð¦ÓÌÑ ÔÏÇÏ, ÑË ÚÁ˦ÎÞÉÔØÓÑ ÚÁÔÒÉÍËÁ Open Firmware."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"÷ÉÂÅÒ¦ÔØ ÖÏÒÓÔËÉÊ ÄÉÓË, ÑËÉÊ ×É ÈÏÞÅÔÅ ÐÅÒÅÆÏÒÍÁÔÕ×ÁÔÉ ÝÏ ×ÓÔÁÎÏ×ÉÔÉ\n"
-"ÎÏ×ÉÊ Ð¦ÄÒÏÚÄ¦Ì ÄÌÑ íÁÎÄÒÅÊË ì¦ÎÁËÓÁ. âÕÄØÔÅ Õ×ÁÖΦ, ÏÓ˦ÌØËÉ ×Ó¦ ÄÁΦ\n"
-"ÂÕÄÕÔØ ÚÎÉÝÅΦ, ¦ צÄÎÏ×ÉÔÉ §È ÂÕÄÅ ÎÅÍÏÖÌÉ×Ï!"
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"ëÌÁÃΦÔØ ÎÁ ËÎÏÐæ \"çÁÒÁÚÄ\", ÑËÝÏ ×É ÈÏÞÅÔÅ ÓÔÅÒÔÉ ×Ó¦ ÄÁΦ ÔÁ\n"
-"ЦÄÒÏÚĦÌÉ ÎÁ ÃØÏÍÕ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ. âÕÄØÔÅ Õ×ÁÖΦ: ЦÓÌÑ ÔÏÇÏ, ÑË ÷É\n"
-"ÎÁÔÉÓÎÅÔÅ ÎÁ \"çÁÒÁÚÄ\" ×É ÎÅ ÚÍÏÖÅÔŠצÄÎÏ×ÉÔÉ ÖÏÄΦ ÄÁΦ ÞÉ\n"
-"ЦÄÒÏÚĦÌÉ, Ñ˦ ÍÁÀÔØÓÑ ÎÁ ÃØÏÍÕ ÄÉÓËÕ, ×ËÌÀÞÁÀÞÉ ÔÁËÏÖ ¦ ÄÁΦ\n"
-"÷¦ÎÄÏ×Ó.\n"
-"\n"
-"ñËÝÏ ÷É ×ÉÒ¦ÛÉÌÉ ×¦ÄͦÎÉÔÉ ÃÀ ÏÐÅÒÁæÀ, ÎÁÔÉÓΦÔØ ËÌÁצÛÕ\n"
-"÷¦ÄͦÎÉÔÉ. ð¦ÄÒÏÚĦÌÉ ¦ ÄÁΦ ÎÁ ÄÉÓËÕ ÚÁÌÉÛÁÔØÓÑ ÂÅÚ ÚͦÎ."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"÷É ×ÉÂÒÁÌÉ ÔÁ˦(ÉÊ) ÓÅÒ×ÅÒ(É): %s\n"
-"\n"
-"㦠ÓÅÒ×ÅÒÉ ÓÔÁÎÄÁÒÔÎÏ ÁËÔÉצÚÏ×ÁΦ. äÌÑ ÎÉÈ ÎÅצÄÏͦ ΦÑ˦ ÐÒÏÂÌÅÍÉ Ú\n"
-"ÂÅÚÐÅËÏÀ, ÁÌÅ ÄÅÑ˦ ÍÏÖÕÔØ ÂÕÔÉ ×ÉÑ×ÌÅΦ. ÷ ÔÁËÏÍÕ ×ÉÐÁÄËÕ ×É ÐÏ×ÉÎΦ\n"
-"ÑËÏÍÏÇÁ Û×ÉÄÛÅ ÐÏÎÏ×ÉÔÉ ×ÅÒÓ¦§ ÃÉÈ ÓÅÒ×ÅÒ¦×. \n"
-"\n"
-"÷É ÈÏÞÅÔÅ ÄÏÚ×ÏÌÉÔÉ ÕÓÔÁÎÏ×ËÕ ÃÉÈ ÓÅÒ×ÅÒ¦×?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "îÅ ÍÏÖÕ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÔÒÁÎÓÌÑæÀ ÂÅÚ NIS ÄÏÍÅÎÕ"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ ×¦ÄÆÏÒÍÁÔÏ×ÁÎÕ Õ FAT × ÄÉÓËÏ×¦Ä %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "ãÑ ÄÉÓËÅÔÁ ΊצÄÆÏÒÍÁÔÏ×ÁÎÁ ÑË FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"äÌÑ ÔÏÇÏ, ÝÏ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÚÁÐÉÓÁΦ ×ÉÂÒÁΦ ÐÁËÅÔÉ, ÚÁ×ÁÎÔÁÖÔÅ\n"
-"ÓÉÓÔÅÍÕ Ú ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "ðÏÍÉÌËÁ ÐÒÉ ÞÉÔÁÎΦ ÆÁÊÌÁ %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "çÁÒÁÚÄ"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"äÅÑ˦ Ú ÁÐÁÒÁÔÎÉÈ ÚÁÓÏÂ¦× ÎÁ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦ ×ÉÍÁÇÁÀÔØ ÄÒÁÊ×ÅÒ¦×\n"
-"ƦÒÍ-×ÉÇÏÔÏ×ÌÀ×ÁÞ¦× ÄÌÑ ÔÏÇÏ, ÝÏ ÐÒÁÃÀ×ÁÔÉ ×¦ÒÎÏ. \n"
-"\n"
-"÷É ÍÏÖÅÔÅ ÚÎÁÊÔÉ ÐÏÔÒ¦ÂÎÕ ¦ÎÆÏÒÍÁæÀ ÐÒÏ ÎÉÈ ÎÁ: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"÷É ÐÏ×ÉÎΦ ÍÁÔÉ Ð¦ÄÒÏÚÄ¦Ì root.\n"
-"äÌÑ ÃØÏÇÏ ÓÔ×ÏÒ¦ÔØ ÎÏ×ÉÊ Ð¦ÄÒÏÚÄ¦Ì (ÁÂÏ ËÌÁÃΦÔØ ÎÁ ×ÖÅ\n"
-"¦ÓÎÕÀÞÏÍÕ). ð¦ÓÌÑ ÃØÏÇÏ ×ÉÂÅÒ¦ÔØ ``ôÏÞËÁ ÍÏÎÔÕ×ÁÎÎÑ'' ¦ ×ÓÔÁÎÏצÔØ §§\n"
-"× `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "÷É ÐÏ×ÉÎΦ ÍÁÔÉ Ð¦ÄÒÏÚÄ¦Ì ÄÌÑ Ó×ÏÐ "
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"÷É ÎÅ ÍÁ¤ÔŠЦÄÒÏÚĦÌÕ ÄÌÑ Ó×ÏЦÎÇÕ\n"
-"\n"
-"÷ÓÅ-ÔÁËÉ ÐÒÏÄÏ×ÖÕ×ÁÔÉ? "
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "÷É ÐÏ×ÉÎΦ ÍÁÔÉ FAT ЦÄÒÏÚÄ¦Ì ÚÍÏÎÔÏ×ÁÎÉÊ × /boot/efi "
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ×¦ÌØÎÉÊ ÐÒÏÓÔ¦Ò"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "îÅÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ ÎÏ×ÉÈ Ð¦ÄÒÏÚĦ̦×"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ ¦ÓÎÕÀÞÉÍ Ð¦ÄÒÏÚĦÌÏÍ"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "îÅÍÁ¤ ¦ÓÎÕÀÞÉÈ Ð¦ÄÒÏÚÄ¦Ì¦× ÄÌÑ ×ÉËÏÒÉÓÔÁÎÎÑ"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ Ð¦ÄÒÏÚÄ¦Ì Windows ÄÌÑ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "ñËÉÊ Ð¦ÄÒÏÚÄ¦Ì ×É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÁÔÉ ÄÌÑ Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "÷ÉÂÅÒ¦ÔØ ÒÏÚͦÒÉ"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "òÏÚÍ¦Ò Ð¦ÄÒÏÚĦÌÕ root × íÂ:"
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "òÏÚÍ¦Ò Ð¦ÄÒÏÚĦÌÕ ÄÌÑ Ó×ÏЦÎÇÕ × íÂ: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ×¦ÌØÎÉÊ ÐÒÏÓÔ¦Ò ÎÁ ЦÄÒÏÚĦ̦ Windows"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "òÏÚÍ¦Ò ÑËÏÇÏ Ð¦ÄÒÏÚĦÌÕ ×É ÈÏÞÅÔÅ ÚͦÎÉÔÉ?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "ïÂÞÉÓÌÀÀ ÍÅÖ¦ ЦÄÒÏÚĦÌÕ Windows"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"ðÒÏÇÒÁÍÁ ÚͦÎÉ ÒÏÚͦÒÕ Ð¦ÄÒÏÚĦÌÕ FAT ÎÅ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú ÷ÁÛÉÍ\n"
-"ЦÄÒÏÚĦÌÏÍ, ÐÒÉ ÒÏÂÏÔ¦ ÓÔÁÌÁÓÑ ÔÁËÁ ÐÏÍÉÌËÁ: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"ð¦ÄÒÏÚÄ¦Ì Ú Windows ÎÁ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦ ÚÁÎÁÄÔÏ\n"
-"ÆÒÁ­ÍÅÎÔÏ×ÁÎÉÊ. ÷ÉËÏÎÁÊÔÅ ÄÅ-ÆÒÁ­ÍÅÎÔÁæÀ \n"
-"ÓÐÏÞÁÔËÕ (ËÏÍÁÎÄÁ ``defarg'')."
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"õ÷áçá!\n"
-"\n"
-"úÁÒÁÚ DrakX ÐÏÔÒ¦ÂÎÏ ÚͦÎÉÔÉ ÒÏÚÍ¦Ò Ð¦ÄÒÏÚĦÌÕ ¦Ú Windows. ïÂÅÒÅÖÎÏ:\n"
-"ÃÑ ÏÐÅÒÁÃ¦Ñ ÎÅÂÅÚÐÅÞÎÁ. ñËÝÏ ×É ÝÅ ÃØÏÇÏ ÎÅ ÚÒÏÂÉÌÉ, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
-"ÚÁÒÁÚ ÐÒÉÐÉÎÉÔÕ ÕÓÔÁÎÏ×ËÕ, ÓËÏÒÉÓÔÁÔÉÓÑ ÐÒÏÇÒÁÍÏÀ scandisk Ú Windows\n"
-"(Á ËÒ¦Í ÔÏÇÏ, ÍÏÖÌÉ×Ï, ÔÁËÏÖ ÄÅÆÒÁÇÍÅÎÔÕ×ÁÔÉ Ð¦ÄÒÏÚÄ¦Ì ÚÁ ÄÏÐÏÍÏÇÏÀ\n"
-"defrag) ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦ ÔÁ ÚÒÏÂÉÔÉ ÒÅÚÅÒ×ÎÕ ËÏЦÀ ÷ÁÛÉÈ ÄÁÎÉÈ.\n"
-"ëÏÌÉ ×ÓÅ ÃÅ ÚÒÏÂÌÅÎÏ - ÎÁÔÉÓΦÔØ çÁÒÁÚÄ."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "ñËÉÊ ÒÏÚÍ¦Ò ×É ÈÏÞÅÔÅ ÚÁÌÉÛÉÔÉ ÄÌÑ Windows?"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "ЦÄÒÏÚÄ¦Ì %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "á×ÔÏÍÁÔÉÞÎÁ ÚͦÎÁ ÒÏÚͦÒÕ FAT ÎÅ ÓÐÒÁÃÀ×ÁÌÁ: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"îÅÍÁ¤ ЦÄÒÏÚĦÌÕ FAT ÄÌÑ ÚͦÎÉ ÒÏÚͦÒÕ ÁÂÏ ÄÌÑ ×ÉËÏÒÉÓÔÁÎÎÑ ÑË ÐÒÉÓÔÒ¦Ê "
-"Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ (ÁÂÏ ÎÅ ×ÉÓÔÁÞÁ¤ צÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "óÔÅÒÔÉ ×ÅÓØ ÄÉÓË"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "óÔÅÒÔÉ Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "õ ÷ÁÓ Â¦ÌØÛÅ ÏÄÎÏÇÏ ÄÉÓËÕ. îÁ ÑËÉÊ Ú ÎÉÈ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ì¦ÎÁËÓ?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "÷ó¶ ¦ÓÎÕÀÞ¦ ЦÄÒÏÚĦÌÉ ÔÁ ×Ó¦ ÄÁΦ ÎÁ ÄÉÓËÕ %s ÂÕÄÕÔØ ×ÔÒÁÞÅΦ"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "óÐÅæÁÌØÎÉÊ ÒÏÚÐÏÄ¦Ì ÄÉÓËÕ"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"ôÅÐÅÒ ×É ÍÏÖÅÔÅ ÒÏÚÂÉÔÉ ÎÁ ЦÄÒÏÚĦÌÉ ÷ÁÛ ÄÉÓË %s.\n"
-"ð¦ÓÌÑ ÔÏÇÏ, ÑË ×É ÚÁ˦ÎÞÉÔÅ ÎÅ ÚÁÂÕÄØÔÅ ×ÉËÏÎÁÔÉ ËÏÍÁÎÄÕ `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "îÁ ЦÄÒÏÚĦ̦ Ú ÓÉÓÔÅÍÏÀ Windows ÎÅ ×ÉÓÔÁÞÁ¤ ÐÒÏÓÔÏÒÕ"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "îÅ ÍÏÖÕ ÚÎÁÊÔÉ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "ðÏͦÞÎÉË ÒÏÚÂÉ×ËÉ ÎÁ ЦÄÒÏÚĦÌÉ DrakX ÚÎÁÊÛÏ× ÔÁ˦ ÍÏÖÌÉצ Ò¦ÛÅÎÎÑ:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "òÏÚÂÉÔÔÑ ÎÁ  ЦÄÒÏÚĦÌÉ ÎÅ×ÄÁÌÅ: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "÷ÍÉËÁÀ ÍÅÒÅÖÕ"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "÷ÉÍÉËÁÀ ÍÅÒÅÖÕ"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"óÔÁÌÁÓÑ ÐÏÍÉÌËÁ, ÁÌÅ Ñ ÎÅ ÚÎÁÀ, ÑË Ú ÎÅÀ ÐÏ×ÏÄÉÔÉÓÑ.\n"
-"ðÒÏÄÏ×ÖÕÊÔÅ ÎÁ Ó×¦Ê ×ÌÁÓÎÉÊ ÒÉÚÉË."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "ðÏÄצÊΦ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"äÅÑ˦ ×ÁÖÌÉצ ÐÁËÅÔÉ ÎÅ ÚÍÏÇÌÉ ×¦ÒÎÏ ×ÓÔÁÎÏ×ÉÔÉÓÑ.  áÂÏ ÷ÁÛ\n"
-"ËÏÍÐÁËÔ-ÄÉÓË ÁÂÏ ÐÒÉ×¦Ä ÄÅÆÅËÔΦ.  ðÅÒÅצÒÔÅ ËÏÍÐÁËÔ ÄÉÓË ÎÁ\n"
-"×ÓÔÁÎÏ×ÌÅÎÏÍÕ ËÏÍÐ'ÀÔÅÒ¦ ËÏÍÁÎÄÏÀ \"rpm -qpl \" \"Mandrake/RPMS/*.rpm\" \n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ ÄÏ %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "îÅÍÁ¤ ÐÒÉ×ÏÄÁ ÄÉÓËÅÔÉ"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "ðÏÞÉÎÁ¤ÔØÓÑ ËÒÏË `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "÷ÉÂÅÒ¦ÔØ ÒÏÚͦÒ, Ñ˦ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "úÁÇÁÌØÎÉÊ ÒÏÚͦÒ: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "÷ÅÒÓ¦Ñ: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "òÏÚͦÒ: %d ëâ\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "¶ÎÆÏÒÍÁæÑ"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "õÓÔÁÎÏ×ËÁ"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "÷ÓÔÁÎÏ×ÌÀÀ"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "úÁÞÅËÁÊÔÅ, ÂÕÄØ-ÌÁÓËÁ, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "úÁÌÉÛÏË ÞÁÓÕ "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "úÁÇÁÌØÎÉÊ ÞÁÓ "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "ð¦ÄÇÏÔÏ×ËÁ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "÷ÓÅ-ÔÁËÉ ÐÒÏÄÏ×ÖÕ×ÁÔÉ?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "óÔÁÌÁÓÑ ÐÏÍÉÌËÁ Ð¦Ä ÞÁÓ ÓÏÒÔÕ×ÁÎÎÑ ÐÁËÅÔ¦×: "
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ×ÖÅ ¦ÓÎÕÀÞÕ ËÏÎƦÇÕÒÁæÀ ÄÌÑ X?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"÷ÁÛÁ ÓÉÓÔÅÍÁ ÍÁ¤ ÚÁÍÁÌÏ ÒÅÓÕÒÓ¦×. ÷É ÍÏÖÅÔÅ ÍÁÔÉ ÐÒÏÂÌÅÍÉ Ú ÕÓÔÁÎÏ×ËÏÀ\n"
-"Mandrake ì¦ÎÁËÓÁ. ñËÝÏ ÃÅ ÓÔÁÎÅÔØÓÑ, ×É ÍÏÖÅÔÅ ÓÐÒÏÂÕ×ÁÔÉ ÕÓÔÁÎÏ×ËÕ ×\n"
-"ÔÅËÓÔÏ×ÏÍÕ ÒÅÖÉͦ. äÌÑ ÃØÏÇÏ Ð¦Ä ÞÁÓ ÚÁ×ÁÎÔÁÖÅÎÎÑ ËÏÍÐÁËÔ-ÄÉÓËÕ\n"
-"ÎÁÔÉÓΦÔØ F1 ¦ ÐÏÔ¦Í ××ÅĦÔØ \"text\"."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "ëÌÁÓ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "âÕÄØ-ÌÁÓËÁ, ×ÉÂÅÒ¦ÔØ ÏÄÉÎ Ú ÐÏÄÁÎÉÈ ËÌÁÓ¦× ÕÓÔÁÎÏ×ËÉ:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "úÁÇÁÌØÎÉÊ ÒÏÚÍ¦Ò ×ÉÂÒÁÎϧ ÷ÁÍÉ ÇÒÕÐÉ ÂÌÉÚØËÏ %d íÂ.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"ñËÝÏ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÍÅÎÛÅ, Î¦Ö ÃÅÊ ÒÏÚͦÒ, ×ÉÂÅÒ¦ÔØ ÒÏÚÍ¦Ò Õ\n"
-"צÄÓÏÔËÁÈ ÔÉÈ ÐÁËÅÔ¦×, ÝÏ ×É ÂÁÖÁ¤ÔÅ ×ÓÔÁÎÏ×ÉÔÉ.\n"
-"\n"
-"ñËÝÏ ×É ×ÉÂÅÒÅÔÅ ÍÁÌÅ ÞÉÓÌÏ, Ô¦ÌØËÉ ÐÁËÅÔÉ, ÂÅÚ ÑËÉÈ ÎÅ ÍÏÖÎÁ ϦÊÔÉÓÑ\n"
-"ÂÕÄÕÔØ ×ÓÔÁÎÏ×ÌÅΦ. ðÒÉ ×ÉÂÏÒ¦ 100% ÂÕÄÅ ×ÓÔÁÎÏ×ÌÅÎÏ ×ÓÅ ×ÉÂÒÁÎÅ."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"îÁ ÷ÁÛÏÍÕ ÄÉÓËÕ ×ÉÓÔÁÞÁ¤ ͦÓÃÑ Ô¦ÌØËÉ ÄÌÑ %d%% ÃÉÈ ÐÁËÅÔ¦×.\n"
-"\n"
-"ñËÝÏ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÍÅÎÛÅ, Î¦Ö ÃÅ, ×ÉÂÅÒ¦ÔØ ÞÉÓÌÏ Õ ×¦ÄÓÏÔËÁÈ\n"
-"×¦Ä ÒÏÚͦÒÕ ÐÁËÅÔ¦× ÄÌÑ ÕÓÔÁÎÏ×ËÉ. ñËÝÏ ×É ×ÉÂÅÒÅÔÅ ÍÁÌÅ ÞÉÓÌÏ, Ô¦ÌØËÉ\n"
-"ÐÁËÅÔÉ, ÂÅÚ ÑËÉÈ ÎÅ ÍÏÖÎÁ ϦÊÔÉÓÑ ÂÕÄÕÔØ ×ÓÔÁÎÏ×ÌÅΦ. ðÒÉ ×ÉÂÏÒ¦\n"
-"%d%% ÂÕÄÅ ×ÓÔÁÎÏ×ÌÅÎÏ ÍÁËÓÉÍÁÌØÎÏ ÍÏÖÌÉ×Å ÞÉÓÌÏ ÐÁËÅÔ¦×."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "â¦ÌØÛ ÔÏÞÎÏ ÍÏÖÎÁ ÂÕÄÅ ×ÉÂÒÁÔÉ ÎÁ ÎÁÓÔÕÐÎÏÍÕ ËÒÏæ"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "ðÒÏÃÅÎÔΦ צÄÎÏÛÅÎÎÑ ÐÁËÅÔ¦× ÄÌÑ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "÷ÉÂ¦Ò ÇÒÕÐ ÐÁËÅÔ¦×"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "¶ÎÄÉצÄÕÌØÎÉÊ ×ÉÂ¦Ò ÐÁËÅÔ¦×"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "úÁÇÁÌØÎÉÊ ÒÏÚͦÒ: %d / %d í "
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "ðÁËÅÔÉ ÎÅÒÏÂÏÞ¦"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "îÁÚ×Á: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "÷ÁÖÌÉצÓÔØ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "÷ÉÂÒÁÔÉ ÃÅÊ ÐÁËÅÔ ÎÅÍÏÖÌÉ×Ï. äÌÑ ÊÏÇÏ ÕÓÔÁÎÏ×ËÉ ÎÅ ×ÉÓÔÁÞÁ¤ ͦÓÃÑ."
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "㦠ÐÁËÅÔÉ ÂÕÄÕÔØ ×ÓÔÁÎÏ×ÌÅÎÉÍÉ"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "㦠ÐÁËÅÔÉ ÂÕÄÕÔØ ÄŦÎÓÔÁÌØÏ×ÁÎÉÍÉ"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "îÅ ÍÏÖÎÁ ×ÉÂÒÁÔÉ ÁÂÏ ×¦ÄͦÎÉÔÉ ×ÉÂ¦Ò ÃØÏÇÏ ÐÁËÅÔÕ."
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "ãÅÊ ÐÁËÅÔ ÎÅÏÂȦÄÎÉÊ. îÅ ÍÏÖÎÁ צÄͦÎÉÔÉ ÊÏÇÏ ×ɦÒ"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "÷ÉÂ¦Ò ÃØÏÇÏ ÐÁËÅÔÕ ÎÅÍÏÖÌÉ×Ï ×¦ÄͦÎÉÔÉ. êÏÇÏ ×ÖÅ ×ÓÔÁÎÏ×ÌÅÎÏ."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"ãÅÊ ÐÁËÅÔ ÐÏ×ÉÎÅÎ ÂÕÔÉ ÐÏÎÏ×ÌÅÎÉÊ\n"
-"÷É ÓÐÒÁ×Ħ ÈÏÞÅÔŠצÄͦÎÉÔÉ ÊÏÇÏ ×ɦÒ?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "÷ÉÂ¦Ò ÃØÏÇÏ ÐÁËÅÔÕ ÎÅÍÏÖÌÉ×Ï ×¦ÄͦÎÉÔÉ. ÷¦Î ÐÏ×ÉÎÅÎ ÂÕÔÉ ÐÏÎÏ×ÌÅÎÉÊ."
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "ðÏËÁÚÕ×ÁÔÉ Á×ÔÏÍÁÔÉÞÎÏ ×ÉÂÒÁΦ ÐÁËÅÔÉ"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "ðÒÏÞÉÔÁÔÉ/ÚÁÐÉÓÁÔÉ Ú/ÎÁ ÄÉÓËÅÔÕ"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "úÂÅÒÅÇÔÉ ×ÉÂ¦Ò ÐÁËÅÔ¦×"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "í¦Î¦ÍÁÌØÎÁ ÕÓÔÁÎÏ×ËÁ"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "îÁÂÌÉÖÅÎÅ ÏÂÞÉÓÌÅÎÎÑ"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "úÁÞÅËÁÊÔÅ, ¦ÄŠЦÄÇÏÔÏ×ËÁ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d ÐÁËÅÔÉ"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"âÕÄØ ÌÁÓËÁ, Õ×ÁÖÎÏ ÐÒÏÞÉÔÁÊÔÅ ÕÍÏ×É ÐÏÄÁΦ ÄÁ̦. ñËÝÏ ×É ÎÅ\n"
-"ÐÏÇÏÄÖÕ¤ÔÅÓØ Ú ÂÕÄØ-ÑËÏÀ ÞÁÓÔÉÎÏÀ, ×ÁÍ ÎÅ ÄÏÚ×ÏÌѤÔØÓÑ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ\n"
-"ÎÁÓÔÕÐÎÉÊ ËÏÍÐÁËÔ-ÄÉÓË. îÁÔÉÓΦÔØ ÎÁ ÷¦ÄÍÏ×ÉÔÉÓÑ ÄÌÑ ÔÏÇÏ, ÝÏÂ\n"
-"ÐÒÏÄÏ×ÖÉÔÉ ÕÓÔÁÎÏ×ËÕ ÂÅÚ ×ÉËÏÒÉÓÔÁÎÎÑ ÃØÏÇÏ ÎÏÓ¦Ñ.\n"
-"\n"
-"äÅÑ˦ ËÏÍÐÏÎÅÎÔÉ ÎÁ ÎÁÓÔÕÐÎÏÍÕ ËÏÍÐÁËÔ-ÄÉÓËÕ ÎÅ ËÅÒÕÀÔØÓÑ Ì¦ÃÅÎÚ¦¤À\n"
-"GPL ÞÉ ÐÏĦÂÎÏÀ ÄÏ Îŧ. ÷ ÔÁËÏÍÕ ×ÉÐÁÄËÕ ËÏÖÅÎ ¦Ú ËÏÍÐÏÎÅÎÔ¦×\n"
-"ËÅÒÕ¤ÔØÓÑ Ó×ϤÀ ÓÐÅÃÉƦÞÎÏÀ ̦ÃÅÎÚ¦¤À. âÕÄØ ÌÁÓËÁ, ÐÒÏÞÉÔÁÊÔÅ Õ×ÁÖÎÏ ¦\n"
-"ÄÏÔÒÉÍÕÊÔÅÓØ ÕÍÏ× ÔÁËϧ ÓÐÅÃÉƦÞÎϧ ̦ÃÅÎÚ¦§ ÐÅÒÛ, Î¦Ö ËÏÒÉÓÔÕ×ÁÔÉÓÑ\n"
-"ÁÂÏ ÐÅÒÅÒÏÚÐÏ×ÓÀÄÖÕ×ÁÔÉ ÔÁËÕ ËÏÍÐÏÎÅÎÔÕ. ôÁ˦ ̦ÃÅÎÚ¦§ Õ Â¦ÌØÛÏÓÔ¦\n"
-"×ÉÐÁÄË¦× ÚÁÂÏÒÏÎÑÀÔØ ÐÅÒÅÄÁÞÕ, ËÏЦÀ×ÁÎÎÑ (ËÒ¦Í ÓÔ×ÏÒÅÎÎÑ ÒÅÚÅÒ×Îϧ\n"
-"ËÏЦ§), ÐÅÒÅÒÏÚÐÏ×ÓÀÄÖÅÎÎÑ, Ú×ÏÒÏÔÎÀ ¦ÎÖÅÎÅÒ¦À, ÄÅ-ÁÓÅÍÂÌÀ×ÁÎÎÑ,\n"
-"ÄÅ-ËÏÍЦÌÑæÀ ÞÉ ÍÏÄÉƦËÁæÀ ËÏÍÐÏÎÅÎÔÉ. âÕÄØ-ÑËÅ ÐÏÒÕÛÅÎÎÑ Ì¦ÃÅÎÚ¦§\n"
-"ÎÅÇÁÊÎÏ ÐÒÉÐÉÎѤ ×ÁÛ¦ ÐÒÁ×Á ÝÏÄÏ ËÏÍÐÏÎÅÎÔÉ. ñËÝÏ ÓÐÅÃÉƦÞÎÏ ÎÅ\n"
-"×ËÁÚÁÎÏ ÐÒÏ ÎÁÄÁÎÎÑ ÔÁËÉÈ ÐÒÁ×, ×É ÎÅ ÍÁ¤ÔÅ ÐÒÁ×Á ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ Ã¦\n"
-"ÐÒÏÇÒÁÍÉ ÎÁ ¦ÌØÛ, Î¦Ö ÏÄÎ¦Ê ÓÉÓÔÅͦ, ÁÂÏ ÐÒÉÓÔÏÓÏ×Õ×ÁÔÉ §È ÄÌÑ\n"
-"ÕÓÔÁÎÏ×ËÉ × ÍÅÒÅÖ¦. ñËÝÏ ×É ÍÁ¤ÔÅ ÓÕÍΦ×É ÝÏÄÏ Ì¦ÃÅÎÚ¦§, Ú×ÅÒΦÔØÓÑ\n"
-"ÂÅÚÐÏÓÅÒÅÄÎØÏ ÄÏ ÄÉÓÔÒÉÂ'ÀÔÏÒÁ ÞÉ ÒÅÄÁËÔÏÒÁ ÔÁËϧ ËÏÍÐÏÎÅÎÔÉ. ðÅÒÅÄÁÞÁ\n"
-"ÔÁËÉÈ ËÏÍÐÏÎÅÎÔ (×ËÌÀÞÁÀÞÉ ÄÏËÕÍÅÎÔÁæÀ) ÔÒÅÔ¦Í ÏÓÏÂÁÍ Õ Â¦ÌØÛÏÓÔ¦\n"
-"×ÉÐÁÄË¦× ÚÁÂÏÒÏÎÅÎÁ. \n"
-"\n"
-"÷Ó¦ Á×ÔÏÒÓØ˦ ÐÒÁ×Á ËÏÍÐÏÎÅÎÔ ÎÁ ÎÁÓÔÕÐÎÏÍÕ ËÏÍÐÁËÔ-ÄÉÓËÕ ÚÁÓÔÅÒÅÖÅΦ\n"
-"ÚÁ §È צÄÐÏצÄÎÉÍÉ Á×ÔÏÒÁÍÉ ¦ ÚÁÈÉÝÁÀÔØÓÑ ÚÁËÏÎÁÍÉ ÐÒÏ ÏÈÏÒÏÎÕ\n"
-"Á×ÔÏÒÓØËÉÈ ÐÒÁ×, Ñ˦ ÍÁÀÔØ ÐÒÁ×Ï ÚÁÓÔÏÓÏ×Õ×ÁÔÉÓÑ ÄÏ ÐÒÏÇÒÁÍÎÉÈ\n"
-"ÐÒÏÄÕËÔ¦×.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "ðÒÉÊÎÑÔÉ"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "÷¦ÄËÉÎÕÔÉ"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"úͦΦÔØ ËÏÍÐÁËÔ-ÄÉÓË!\n"
-"\n"
-"âÕÄØ-ÌÁÓËÁ, ×ÓÔÁ×ÔÅ ËÏÍÐÁËÔ-ÄÉÓË, ÐÏÚÎÁÞÅÎÉÊ \"%s\" Õ ÐÒÉÓÔÒ¦Ê ¦\n"
-"ÎÁÔÉÓΦÔØ çÁÒÁÚÄ Ð¦ÓÌÑ ÃØÏÇÏ.\n"
-"\n"
-"ñËÝÏ ×É ÎÅ ÍÁ¤ÔÅ ÔÁËÏÇÏ ÄÉÓËÕ, ÎÁÔÉÓΦÔØ ÷¦ÄͦÎÉÔÉ, ÝÏ ÎÅ\n"
-"×ÓÔÁÎÏ×ÌÀ×ÁÔÉ Ú ÃØÏÇÏ ÄÉÓËÕ."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "óÔÁÌÁÓÑ ÐÏÍÉÌËÁ Ð¦Ä ÞÁÓ ÕÓÔÁÎÏ×ËÉ ÐÁËÅÔ¦×: "
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "óÔÁÌÁÓÑ ÐÏÍÉÌËÁ"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "ì¦ÃÅÎÚ¦ÊÎÁ ÕÍÏ×Á"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"÷ÓÔÕÐ\n"
-"\n"
-"ïÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ ÔÁ Ò¦ÚÎÏÍÁΦÔΦ ËÏÍÐÏÎÅÎÔÉ, ÝÏ ÍÁÀÔØÓÑ ×\n"
-"ÄÉÓÔÒÉÂÕÔÉצ ì¦ÎÁËÓ íÁÎÄÒÅÊË ÎÁÄÁ̦ ÍÁÀÔØ Ú×ÁÔÉÓÑ \"ðÒÏÇÒÁÍΦ\n"
-"ÐÒÏÄÕËÔÉ\". ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ×ËÌÀÞÁÀÔØ ÁÌÅ ÎÅ ÏÂÍÅÖÕÀÔØÓÑ ÎÁÂÏÒÁÍÉ\n"
-"ÐÒÏÇÒÁÍ, ÍÅÔÏÄ¦× ÐÒÁ×ÉÌ ÔÁ ÄÏËÕÍÅÎÔÁæ¤À, ÑËÁ ÍÁ¤ צÄÎÏÛÅÎÎÑ ÄÏ\n"
-"ÏÐÅÒÁæÊÎϧ ÓÉÓÔÅÍÉ ÔÁ Ò¦ÚÎÏÍÁΦÔÎÉÈ ÓËÌÁÄÏ×ÉÈ ÞÁÓÔÉÎ ÄÉÓÔÒÉÂÕÔÉ×Á\n"
-"ì¦ÎÁËÓ íÁÎÄÒÅÊËÁ.\n"
-"\n"
-"1. ì¦ÃÅÎÚ¦ÊÎÁ ÕÇÏÄÁ\n"
-"\n"
-"âÕÄØ ÌÁÓËÁ, ÐÒÏÞÉÔÁÊÔÅ ÃÀ ÕÇÏÄÕ Õ×ÁÖÎÏ. ãÅÊ ÄÏËÕÍÅÎÔ ¤ ̦ÃÅÎÚ¦ÊÎÏÀ\n"
-"ÕÇÏÄÏÀ Í¦Ö ÷ÁÍÉ ÔÁ MandrakeSoft S.A., ÑËÁ ÓÔÏÓÕ¤ÔØÓÑ ÐÒÏÇÒÁÍÎÉÈ\n"
-"ÐÒÏÄÕËÔ¦×. ÷ÓÔÁÎÏ×ÌÅÎÎÑÍ, ÄÕÂÌÀ×ÁÎÎÑÍ ÞÉ ×ÉËÏÒÉÓÔÁÎÎÑÍ ðÒÏÇÒÁÍÎÉÈ\n"
-"ÐÒÏÄÕËÔ¦× ÂÕÄØ-ÑËÉÍ ÞÉÎÏÍ, ÷É ÔÉÍ ÓÁÍÉÍ Ñ×ÎÏ ÐÒÉÊÍÁ¤ÔÅ ÎÁ ÐÏ×ΦÓÔÀ\n"
-"ÐÏÇÏÄÖÕ¤ÔÅÓØ Ú ÕÍÏ×ÁÍÉ ÄÁÎϧ ì¦ÃÅÎÚ¦§. ñËÝÏ ÷É ÎÅ ÐÏÇÏÄÖÕ¤ÔÅÓØ Ú\n"
-"ÂÕÄØ-ÑËÏÀ ÞÁÓÔÉÎÏÀ ì¦ÃÅÎÚ¦ÊÎϧ ÕÇÏÄÉ, ÷ÁÍ ÎÅ ÄÏÚ×ÏÌѤÔØÓÑ\n"
-"×ÓÔÁÎÏ×ÌÀ×ÁÔÉ, ÄÕÂÌÀ×ÁÔÉ ÞÉ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ðÒÏÇÒÁÍÎÉÍ\n"
-"ÐÒÏÄÕËÔÏÍ. âÕÄØ-ÑËÁ ÓÐÒÏÂÁ ×ÓÔÁÎÏ×ÌÅÎÎÑ, ÄÕÂÌÀ×ÁÎÎÑ ÞÉ ×ÉËÏÒÉÓÔÁÎÎÑ\n"
-"ðÒÏÇÒÁÍÎÏÇÏ ÐÒÏÄÕËÔÕ ÞÉÎÏÍ, ÑËÉÊ ÎŠצÄÐÏצÄÁ¤ ÕÍÏ×ÁÍ õÇÏÄÉ ×ÉÚÎÁ¤ÔØÓÑ\n"
-"ÐÏÒÕÛÅÎÎÑÍ õÇÏÄÉ ¦, ÔÉÍ ÓÁÍÉÍ ÷É ÐÏÚÂÁ×ÌѤÔÅÓØ ÐÒÁ× ÚÁ æ¤À\n"
-"õÇÏÄÏÀ. ð¦ÓÌÑ ÐÒÉÐÉÎÅÎÎÑ Ä¦§ 椧 õÇÏÄÉ, ÷É ÐÏ×ÉÎΦ ÎÅÇÁÊÎÏ ÚÎÉÝÉÔÉ\n"
-"×Ó¦ ËÏЦ§ ðÒÏÇÒÁÍÎÉÈ ðÒÏÄÕËÔ¦×.\n"
-"\n"
-"2. ïÂÍÅÖÅÎÁ ÇÁÒÁÎÔ¦Ñ\n"
-"\n"
-"ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÔÁ ÄÏÐÏ×ÎÀÀÞÁ ÄÏËÕÍÅÎÔÁÃ¦Ñ ÐÏÓÔÁ×ÌÑÀÔØÓÑ \"ÑË ¤\",\n"
-"ÂÅÚ ÇÁÒÁÎÔ¦§, × ÍÅÖÁÈ ×ÓÔÁÎÏ×ÌÅÎÉÈ ÚÁËÏÎÏÄÁ×ÓÔ×ÏÍ. î¦ ÚÁ ÑËÉÈ ÕÍÏ×\n"
-"MandrakeSoft S.A. ÎÅ ÂÕÄÅ ÎÅÓÔÉ ×¦ÄÐÏצÄÁÌØÎÏÓÔ¦, × ÍÅÖÁÈ ×ÓÔÁÎÏ×ÌÅÎÉÈ\n"
-"ÚÁËÏÎÏÄÁ×ÓÔ×ÏÍ, ÚÁ ×ÉÐÁÄËÏצ, ÐÒÑͦ ÞÉ ÏÐÏÓÅÒÅÄËÏ×ÁΦ ( ×ËÌÀÞÁÀÞÉ ÁÌÅ\n"
-"ÎÅ ÏÂÍÅÖÕÀÞÉÓØ ×ÔÒÁÔÁÍÉ ÞÉ ÐÅÒÅÐÉÎÁÍÉ Â¦ÚÎÅÓÕ, ƦÎÁÎÓÏ×ÉÍÉ ×ÔÒÁÔÁÍÉ,\n"
-"ÁÄ×ÏËÁÔÓØËÉÍÉ ×ÉÔÒÁÔÁÍÉ ÞÉ ÛÔÒÁÆÁÍÉ, ÑË ÒÅÚÕÌØÔÁÔ ÐÒÉÓÕÄÕ ÓÕÄÏ×ϧ\n"
-"¦ÎÓÔÁÎæ§, ÞÉ ÂÕÄØ-Ñ˦ ¦ÎÛ¦ ×ÔÒÁÔÉ), ÝÏ ÐÏÈÏÄÑÔØ ×¦Ä ×ÉËÏÒÉÓÔÁÎÎÑ,\n"
-"ÁÂÏ, ÎÁ×ÐÁËÉ, ×¦Ä ÎÅÍÏÖÌÉ×ÏÓÔ¦ ×ÉËÏÒÉÓÔÁÎÎÑ ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ, ÎÁצÔØ\n"
-"Õ ×ÉÐÁÄËÕ, ÑËÝÏ MandrakeSoft S.A. ÐÏצÄÏÍÌÑÌÏÓÑ ÐÒÏ ÍÏÖÌÉ×ÏÓÔ¦ ÔÁËÉÈ\n"
-"×ÔÒÁÔ.\n"
-"\n"
-"ïâíåöåîîñ ÷¶äðï÷¶äáìøîïóô¶, úáìåöîï· ÷¶ä ïâìáäáîîñ áâï ÷éëïòéóôáîîñ\n"
-"úáâïòïîåîéè ðòïçòáíîéè ðòïäõëô¶÷ ÷ äåñëéè ëòá·îáè\n"
-"\n"
-"÷ ÍÅÖÁÈ ×ÓÔÁÎÏ×ÌÅÎÉÈ ÚÁËÏÎÏÄÁ×ÓÔ×ÏÍ, MandrakeSoft S.A. ÞÉ ÊÏÇÏ\n"
-"ÄÉÓÔÒÉÂÀÔÏÒÉ Î¦ ÚÁ ÑËÉÈ ÕÍÏ× ÎÅ ÎÅÓÕÔØ ×¦ÄÐÏצÄÁÌØÎÏÓÔ¦ ÚÁ ÖÏÄÎÅ\n"
-"ÎÁ×ÍÉÓÎÅ, ×ÉÐÁÄËÏ×Å, ÐÒÑÍÅ ÞÉ ÏÐÏÓÅÒÅÄËÏ×ÁÎÅ ÐÏÛËÏÄÖÅÎÎÑ, (×ËÌÀÞÁÀÞÉ\n"
-"ÁÌÅ ÎÅ ÏÂÍÅÖÕÀÞÉÓØ ÐÅÒÅÛËÏÄÁÍÉ ÄÌÑ Â¦ÚÎÅÓÕ, ÐÒÉÐÉÎÅÎÎÑÍ Â¦ÚÎÅÓÕ,\n"
-"ƦÎÁÎÓÏ×ÉÍÉ ×ÔÒÁÔÁÍÉ, ÁÄ×ÏËÁÔÓØËÉÍÉ ×ÉÔÒÁÔÁÍÉ ÞÉ ÛÔÒÁÆÁÍÉ, ÑË\n"
-"ÒÅÚÕÌØÔÁÔ ÐÒÉÓÕÄÕ ÓÕÄÏ×ϧ ¦ÎÓÔÁÎæ§, ÞÉ ÂÕÄØ-ÑËÉÍÉ ¦ÎÛÉÍ ×ÔÒÁÔÁÍÉ),\n"
-"Ñ˦ ×ÉÎÉËÁÀÔØ ×¦Ä ÏÂÌÁÄÁÎÎÑ ÞÉ ×ÉËÏÒÉÓÔÁÎÎÑ ÐÒÏÇÒÁÍÎÉÈ ËÏÍÐÏÎÅÎÔ ÞÉ\n"
-"×ÉÎÉËÁÀÔØ ×¦Ä ÚÁ×ÁÎÔÁÖÅÎÎÑ ÚÁÂÏÒÏÎÅÎÉÈ ÚÁËÏÎÏÄÁ×ÓÔ×ÏÍ ÞÉ ÏÂÍÅÖÅÎÉÈ ÄÏ\n"
-"×ÉËÏÒÉÓÔÁÎÎÑ × ÄÅÑËÉÈ ËÒÁ§ÎÁÈ ÐÒÏÇÒÁÍÎÉÈ ËÏÍÐÏÎÅÎÔ ÐÏ ÍÅÒÅÖ¦ Ú ÏÄΦ¤§\n"
-"Ú ÄÏÍÁÛÎ¦È ÓÔÏÒ¦ÎÏË ì¦ÎÁËÓ íÁÎÄÒÅÊË. ãÑ ÏÂÍÅÖÅÎÁ צÄÐÏצÄÁÌØΦÓÔØ\n"
-"×ËÌÀÞÁ¤ ÔÁËÏÖ (ÁÌÅ ÎÅ ÏÂÍÅÖÕ¤ÔØÓÑ) ÔÁË Ú×ÁÎÉÍÉ ÓÉÌØÎÉÍÉ\n"
-"ËÒÉÐÔÏÇÒÁƦÞÎÉÍÉ ÍÅÔÏÄÁÍÉ, Ñ˦ ×ËÌÀÞÅΦ × ðÒÏÇÒÁÍÎÉÊ ÐÒÏÄÕËÔ.\n"
-"\n"
-"3. ì¦ÃÅÎÚ¦Ñ GPL ÔÁ ÐÏĦÂΦ\n"
-"\n"
-"ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÓËÌÁÄÁÀÔØÓÑ Ú ËÏÍÐÏÎÅÎÔ, ÒÏÚÒÏÂÌÅÎÉÈ Ò¦ÚÎÉÍÉ\n"
-"ƦÚÉÞÎÉÍÉ ÞÉ ÀÒÉÄÉÞÎÉÍÉ ÏÓÏÂÁÍÉ. â¦ÌØÛ¦ÓÔØ ËÏÍÐÏÎÅÎÔ ËÅÒÕÀÔØÓÑ\n"
-"ÔÅÒͦÎÁÍÉ ÔÁ ÕÍÏ×ÁÍÉ ÚÁÇÁÌØÎϧ ÐÕÂ̦ÞÎϧ ̦ÃÅÎÚ¦§ GNU (GNU General\n"
-"Public Licence), ÑËÕ ÍÉ ÎÁÄÁ̦ ÂÕÄÅÍÏ ÎÁÚÉ×ÁÔÉ × ÄÁÎÏÍÕ ÄÏËÕÍÅÎÔ¦ GPL,\n"
-"ÁÂÏ ÐÏĦÂÎÉÍÉ ÄÏ ÄÁÎϧ ̦ÃÅÎÚ¦ÑÍÉ. â¦ÌØÛ¦ÓÔØ ÔÁËÉÈ Ì¦ÃÅÎÚ¦Ê â¦ÌØÛ¦ÓÔØ\n"
-"Ú ÃÉÈ Ì¦ÃÅÎÚ¦Ê ÄÏÚ×ÏÌÑÀÔØ ×ÉËÏÒÉÓÔÁÎÎÑ, ÄÕÂÌÀ×ÁÎÎÑ, ÐÒÉÊÎÑÔÔÑ ÔÁ\n"
-"ÐÅÒÅÒÏÚÐÏ×ÓÀÄÖÅÎÎÑ ÓËÌÁÄÏ×ÉÈ ÞÁÓÔÉÎ, Ñ˦ ×ÏÎÉ ÒÅÇÕÌÀÀÔØ. âÕÄØ-ÌÁÓËÁ,\n"
-"ÏÚÎÁÊÏÍÔÅÓØ Õ×ÁÖÎÏ Ú ÔÅÒͦÎÁÍÉ ÔÁ ÕÍÏ×ÁÍÉ Ì¦ÃÅÎÚ¦ÊÎÉÈ ÕÍÏ× ÄÌÑ ËÏÖÎϧ\n"
-"ÓËÌÁÄÏ×ϧ ÞÁÓÔÉÎÉ ÐÅÒÛ, Î¦Ö ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÂÕÄØ-ÑËÕ Ú\n"
-"ÞÁÓÔÉÎ. âÕÄØ-Ñ˦ ÚÁÐÉÔÁÎÎÑ ÓÔÏÓÏ×ÎÏ Ì¦ÃÅÎÚ¦§ ÎÁ ÏËÒÅÍÕ ÓËÌÁÄÏ×Õ\n"
-"ÞÁÓÔÉÎÕ ÍÁÀÔØ ÁÄÒÅÓÕ×ÁÔÉÓÑ Á×ÔÏÒÕ Ã¦¤§ ÓËÌÁÄÏ×ϧ ÞÁÓÔÉÎÉ, Á ÎÅ ÄÏ\n"
-"MandrakeSoft. ðÒÏÇÒÁÍÉ, ÒÏÚÒÏÂÌÅΦ MandrakeSoft S.A. ËÅÒÕÀÔØÓÑ\n"
-"̦ÃÅÎÚ¦¤À GPL. äÏËÕÍÅÎÔÁæÑ, ÒÏÚÒÏÂÌÅÎÁ MandrakeSoft S.A. ËÅÒÕ¤ÔØÓÑ\n"
-"ÓÐÅæÁÌØÎÏÀ ̦ÃÅÎÚ¦¤À. ú×ÅÒΦÔØÓÑ, ÂÕÄØ-ÌÁÓËÁ, ÄÏ ÄÏËÕÍÅÎÔÁæ§ ÚÁ\n"
-"ÐÏÄÒÏÂÉÃÑÍÉ.\n"
-"\n"
-"4. ðÒÁ×Á ¦ÎÔÅÌÅËÔÕÁÌØÎϧ ×ÌÁÓÎÏÓÔ¦\n"
-"\n"
-"÷Ó¦ ÐÒÁ×Á ÎÁ ÓËÌÁÄÏצ ËÏÍÐÏÎÅÎÔÉ ðÒÏÇÒÁÍÎÉÈ ÐÒÏÄÕËÔ¦× ÎÁÌÅÖÁÔØ\n"
-"צÄÐÏצÄÎÉÍ Á×ÔÏÒÁÍ ¦ ÚÁÈÉÝÅΦ ÚÁËÏÎÁÍÉ ÐÒÏ ¦ÎÔÅÌÅËÔÕÁÌØÎÕ ×ÌÁÓΦÓÔØ\n"
-"ÔÁ ÐÒÁ×Á ÎÁ ËÏЦÀ×ÁÎÎÑ, Ñ˦ ÍÁÀÔØ ÚÁÓÔÏÓÕ×ÁÎÎÑ ÄÏ ÐÒÏÇÒÁÍÎÏÇÏ\n"
-"ÚÁÂÅÚÐÅÞÅÎÎÑ. MandrakeSoft S.A. ÚÁÌÉÛÁ¤ ÚÁ ÓÏÂÏÀ ÐÒÁ×Ï ÚͦÎÀ×ÁÔÉ ÞÉ\n"
-"ÁÄÁÐÔÕ×ÁÔÉ ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÑË × Ã¦ÌÏÍÕ, ÔÁË ¦ ÏËÒÅÍÉÍÉ ÞÁÓÔÉÎÁÍÉ Ú\n"
-"ÂÕÄØ-ÑËÏÀ ÍÅÔÏÀ ¦ ÄÌÑ ÂÕÄØ-ÑËÉÈ Ã¦ÌÅÊ. \"Mandrake\", \"Mandrake Linux\" ÔÁ\n"
-"צÄÐÏצÄΦ ÌÏÇÏÔÉÐÉ ¤ ÔÏÒǦ×ÅÌØÎÉÍÉ ÍÁÒËÁÍÉ MandarakeSoft S.A.\n"
-"\n"
-"5. úÁËÏÎÏÄÁ×ÓÔ×Ï\n"
-"\n"
-"ñËÝÏ ÂÕÄØ-ÑËÉÊ ÒÏÚÄ¦Ì Ã¦¤§ ÕÇÏÄÉ ÐÒÉÚÎÁÎÉÊ ÎÅĦÊÓÎÉÍ, ÔÁËÉÍ, ÝÏ ÎÅ\n"
-"צÄÐÏצÄÁ¤ ÚÁËÏÎÏÄÁ×ÓÔ×Õ ÞÉ ÎÅצÄÐÏצÄÎÉÍ ÝÏÄÏ ÓÕÄÏ×ϧ ÐÏÓÔÁÎÏ×É, ÃÅÊ\n"
-"ÒÏÚÄ¦Ì ÕÇÏÄÉ ×ÉÄÁÌѤÔØÓÑ Ú ÄÁÎÏÇÏ ËÏÎÔÒÁËÔÕ. ÷É ÚÁÌÉÛÁ¤ÔÅÓØ Ú×'ÑÚÁÎÉÍÉ\n"
-"¦ÎÛÉÍÉ ÓÅËæÑÍÉ Ã¦¤§ ÕÇÏÄÉ, Ñ˦ ÝÅ ÍÁÀÔØ ÚÁÓÔÏÓÕ×ÁÎÎÑ. ôÅÒͦÎÉ ÔÁ\n"
-"ÕÍÏ×É Ã¦¤§ ì¦ÃÅÎÚ¦§ ËÅÒÕÀÔØÓÑ úÁËÏÎÏÄÁ×ÓÔ×ÏÍ æÒÁÎæ§. ÷Ó¦ ÓЦÒΦ\n"
-"ÐÉÔÁÎÎÑ ÝÏÄÏ ÔÅÒÍ¦Î¦× ÔÁ ÕÍÏ× Ã¦¤§ ̦ÃÅÎÚ¦§ ÂÕÄÕÔØ ÒÏÚ×'ÑÚÕ×ÁÔÉÓÑ ÐÏ\n"
-"ÍÏÖÌÉ×ÏÓÔ¦ ÐÏÚÁ ÍÅÖÁÍÉ ÓÕÄÏ×ÉÈ ÕÓÔÁÎÏ×. ÷ ËÒÁÊÎ¦È ×ÉÐÁÄËÁÈ ÓЦÒΦ\n"
-"ÐÉÔÁÎÎÑ ÂÕÄÕÔØ ×ÉÒ¦ÛÕ×ÁÔÉÓÑ ×¦ÄÐÏצÄÎÉÍ úÁËÏÎÎÉÍ óÕÄÏÍ ðÁÒÉÖÁ -\n"
-"æÒÁÎæÑ.\n"
-"\n"
-"ú ÂÕÄØ-ÑËÉÍÉ ÐÉÔÁÎÎÑÍÉ ÝÏÄÏ ÃØÏÇÏ ÄÏËÕÍÅÎÔÁ Ú×ÅÒÔÁÊÔÅÓÑ, ÂÕÄØ-ÌÁÓËÁ,\n"
-"ÄÏ MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "ëÌÁצÁÔÕÒÁ"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "ñËÁ Õ ÷ÁÓ ÒÏÚËÌÁÄËÁ ËÌÁצÁÔÕÒÉ?"
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "ôÕÔ ÎÁ×ÅÄÅÎÏ ÐÏ×ÎÉÊ ÓÐÉÓÏË ÎÁÑ×ÎÉÈ ËÌÁצÁÔÕÒ"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "ñËÉÊ ËÌÁÓ ÕÓÔÁÎÏ×ËÉ ×É ×ÉÂÉÒÁ¤ÔÅ?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ/ðÏÎÏ×ÉÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "ãÅ ÕÓÔÁÎÏ×ËÁ ÞÉ ÐÏÎÏ×ÌÅÎÎÑ?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "òÅËÏÍÅÎÄÏ×ÁÎÉÊ"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "åËÓÐÅÒÔ"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "ðÏÎÏ×ÌÅÎÎÑ"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "ðÏÒÔ ÍÉÛ¦"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÕ ÐÒɤÄÎÁÎÏ ÍÉÛÕ?"
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "åÍÕÌÑÃ¦Ñ ËÌÁצÛ"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "åÍÕÌÑÃ¦Ñ 2 ËÌÁצÛ"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "åÍÕÌÑÃ¦Ñ 3 ËÌÁצÛ"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "ëÏÎƦÇÕÒÕÀ ËÁÒÔËÉ PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "ÎÅÍÁ¤ ЦÄÒÏÚĦ̦×"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "óËÁÎÕ×ÁÎÎÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÄÌÑ ÚÎÁÈÏÄÖÅÎÎÑ ÔÏÞÏË ÍÏÎÔÕ×ÁÎÎÑ"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "÷ÉÂÅÒ¦ÔØ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"îÅ ÍÏÖÕ ÐÒÏÞÉÔÁÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×, ×ÏÎÁ ÚÁÎÁÄÔÏ Ú¦ÐÓÏ×ÁÎÁ ÄÌÑ ÍÅÎÅ\n"
-":( ñ ÓÐÒÏÂÕÀ ÓÔÅÒÔÉ Ú¦ÐÓÏ×ÁΦ ЦÄÒÏÚĦÌÉ ¦ ÷ó¶ äáî¶ ÂÕÄÕÔØ\n"
-"×ÔÒÁÞÅΦ. ðÒÏÂÌÅͦ ÍÏÖÎÁ ÔÁËÏÖ ÚÁÐϦÇÔÉ, ÑËÝÏ ÚÁÂÏÒÏÎÉÔÉ DrakX\n"
-"ÚͦÎÀ×ÁÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×. (ÐÏÍÉÌËÁ: %s)\n"
-"\n"
-"÷É ÐÏÇÏÄÖÕ¤ÔÅÓØ ×ÔÒÁÔÉÔÉ ×Ó¦ ЦÄÒÏÚĦÌÉ?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ÎÅ ÍÏÖŠצÒÎÏ ÐÒÏÞÉÔÁÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×.\n"
-"ðÒÏÄÏ×ÖÕÊÔÅ ÎÁ Ó×¦Ê ×ÌÁÓÎÉÊ ÒÉÚÉË!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"îÅ ×ÉÓÔÁÞÁ¤ צÌØÎÏÇÏ Í¦ÓÃÑ ÄÌÑ 1íâ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÏÇÏ ÂÌÏËÕ! õÓÔÁÎÏ×ËÁ\n"
-"ÂÕÄÅ ÐÒÏÄÏ×ÖÕ×ÁÔÉÓØ, ÁÌÅ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ Ó×Ϥ§ ÓÉÓÔÅÍÉ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
-"ÂÕÄÅ ÓÔ×ÏÒÉÔÉ DiskDrake'ÏÍ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ Ð¦ÄÒÏÚÄ¦Ì "
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "îÅ ÍÏÖÕ ÚÎÁÊÔÉ Ð¦ÄÒÏÚÄ¦Ì root ÄÌÑ ÐÏÎÏ×ÌÅÎÎÑ ÓÉÓÔÅÍÉ"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "ð¦ÄÒÏÚÄ¦Ì root"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "ñËÉÊ Ð¦ÄÒÏÚÄ¦Ì Õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ¤ ЦÄÒÏÚĦÌÏÍ root (/)?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"äÌÑ ÔÏÇÏ, ÝÏ ÔÁÂÌÉÃÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÂÕÌÁ ÁËÔÉצÚÏ×ÁÎÁ, ÷ÁÍ ÔÒÅÂÁ\n"
-"ÐÅÒÅ×ÁÎÔÁÖÉÔÉ ÓÉÓÔÅÍÕ"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "÷ÉÂÅÒ¦ÔØ Ð¦ÄÒÏÚĦÌÉ, Ñ˦ ÷É ÈÏÞÅÔŠצÄÆÏÒÍÁÔÕ×ÁÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "ðÅÒÅצÒÑÔÉ Ú¦ÊΦ ÂÌÏËÉ?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "æÏÒÍÁÔÕ×ÁÎÎÑ Ð¦ÄÒÏÚĦ̦×"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "óÔ×ÏÒÀÀ ÔÁ ÆÏÒÍÁÔÕÀ ÆÁÊÌ %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"îÅ ×ÉÓÔÁÞÁ¤ Ó×ÏÐ-ÐÁÍ'ÑÔ¦ ÝÏ ÚÁ˦ÎÞÉÔÉ ÕÓÔÁÎÏ×ËÕ. ú¦ÌØÛ¦ÔØ\n"
-"§§. ÂÕÄØ-ÌÁÓËÁ."
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "ûÕËÁÀ ÎÁÑ×Φ ÐÁËÅÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "ûÕËÁÀ ÐÁËÅÔÉ ÄÌÑ ÐÏÎÏ×ÌÅÎÎÑ"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅ ÚÁÌÉÛÉÌÏÓØ ÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ Í¦ÓÃÑ ÄÌÑ ÕÓÔÁÎÏ×ËÉ\n"
-"ÞÉ ÐÏÎÏ×ÌÅÎÎÑ (%d > %d )"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "ðÏ×ÎÉÊ (%díÂ)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "í¦Î¦ÍÁÌØÎÉÊ (%díÂ)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "òÅËÏÍÅÎÄÏ×ÁÎÉÊ (%díÂ)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "óÐÅæÁÌØÎÉÊ"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"âÕÄØ ÌÁÓËÁ, ×ÉÂÅÒ¦ÔØ ÚÁÐÉÓ/ÚÁ×ÁÎÔÁÖÅÎÎÑ ×ÉÂÏÒÕ ÐÁËÅÔ¦× ÎÁ ÄÉÓËÅÔÕ.\n"
-"æÏÒÍÁÔ ÄÉÓÔÅÔÉ ÔÁËÉÊ-ÖÅ, ÑË ¦ ÄÉÓËÅÔÉ auto_install."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÄÉÓËÅÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "÷¦ÄÎÏ×ÌÀÀ Ú ÄÉÓËÅÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "÷ÉÂ¦Ò ÐÁËÅÔ¦×"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ, Ú ÚÁÐÉÓÁÎÉÍ ÓÐÉÓËÏÍ ÐÁËÅÔ¦×"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "úÁÐÉÓÁÔÉ ÎÁ ÄÉÓËÅÔÕ"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "÷ÉÂÒÁÎÉÊ ÒÏÚÍ¦Ò Â¦ÌØÛÉÊ ÚÁ ÎÁÑ×ÎÉÊ ÐÒÏÓÔ¦Ò"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"ñËÝÏ ÷É ÍÁ¤ÔÅ ×Ó¦ ËÏÍÐÁËÔ-ÄÉÓËÉ Ú ÐÏÄÁÎÉÈ ×ÉÝÅ, ÎÁÔÉÓΦÔØ ÎÁ \"çÁÒÁÚÄ\".\n"
-"ñËÝÏ ÷É ÎÅ ÍÁ¤ÔÅ ÖÏÄÎÏÇÏ Ú ÐÏÄÁÎÉÈ ×ÉÝÅ, ÎÁÔÉÓΦÔØ ÎÁ \"÷¦ÄͦÎÉÔÉ\".\n"
-"ñËÝÏ Ô¦ÌØËÉ ÄÅÑËÉÈ ËÏÍÐÁËÔ-ÄÉÓË¦× ÎÅ ×ÉÓÔÁÞÁ¤, צÄͦΦÔØ §È ×ɦÒ, ¦\n"
-"ÎÁÔÉÓΦÔØ \"çÁÒÁÚÄ\" ЦÓÌÑ ÃØÏÇÏ.\"  "
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "ëÏÍÐÁËÔ-ÄÉÓË Ú ÅÔÉËÅÔËÏÀ \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"÷ÓÔÁÎÏ×ÌÀÀ ÐÁËÅÔ %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ Ð¦ÓÌÑ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "÷ÓÔÁ×ÔÅ ÓÉÓÔÅÍÎÕ ÄÉÓËÅÔÕ, ÑËÁ ×ÖÉ×ÁÌÁÓÑ × ÄÉÓËÏ×ÏĦ %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ ðÏÎÏ×ÌÅÎÎÑ íÏÄÕÌ¦× × ÄÉÓËÏ×¦Ä %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"÷É ÍÁ¤ÔÅ ÍÏÖÌÉצÓÔØ ÚÁÒÁÚ Ú×ÁÎÔÁÖÉÔÉ ËÒÉÐÔÏÇÒÁƦÞÎÅ ÐÒÏÇÒÁÍÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ.\n"
-"\n"
-"õ÷áçá!\n"
-"\n"
-"þÅÒÅÚ ×¦ÄͦÎÎÏÓÔ¦ × ÚÁÇÁÌØÎÉÈ ÒÅËÏÍÅÎÄÁæÑÈ ÄÏ ÔÁËÏÇÏ ÔÉÐÕ ÐÒÏÇÒÁÍÎÏÇÏ\n"
-"ÚÁÂÅÚÐÅÞÅÎÎÑ, ÝÏ ÚÁÌÅÖÁÔØ ×¦Ä ×¦ÄͦÎÎÏÓÔÅÊ × ÀÒÉÓÄÉËæÑÈ, ËÏÒÉÓÔÕ×ÁÞ\n"
-"ÔÁ/ÁÂÏ Ë¦ÎÃÅ×ÉÊ ËÏÒÉÓÔÕ×ÁÞ ÃØÏÇÏ ÐÒÏÇÒÁÍÎÏÇÏ ÐÒÏÄÕËÔÕ ÍÁÀÔØ\n"
-"ÐÅÒÅÓצÄÞÉÔÉÓÑ, ÝÏ ÚÁËÏÎÏÄÏ×ÓÔ×Ï §§/ÊÏÇÏ ÀÒÉÓÄÉËæ§ ÄÏÚ×ÏÌÑÀÔØ §Ê/ÊÏÍÕ\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÔÉ, ÚÂÅÒ¦ÇÁÔÉ ÔÁ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÔÁËÅ ÐÒÏÇÒÁÍÎÅ\n"
-"ÚÁÂÅÚÐÅÞÅÎÎÑ.\n"
-"\n"
-"äÏÄÁÔËÏ×Ï ËÏÒÉÓÔÕ×ÁÞ ÔÁ/ÁÂÏ Ë¦ÎÃÅ×ÉÊ ËÏÒÉÓÔÕ×ÁÞ ÏÓÏÂÌÉ×Ï ÍÁÀÔØ\n"
-"Ú×ÅÒÎÕÔÉ Õ×ÁÇÕ ÎÁ ÔÅ, ÝÏ ÎÅ ÐÏÒÕÛÕ×ÁÔÉ ÚÁËÏÎÏÄÁ×ÓÔ×Ï Ó×Ϥ§\n"
-"ÀÒÉÓÄÉËæ§. õ ÒÁÚ¦ ÐÏÒÕÛÅÎÎÑ ×¦ÄÐÏצÄÎÏÇÏ ÚÁËÏÎÏÄÁ×ÓÔ×Á ×ÏÎÉ ÍÏÖÕÔØ\n"
-"ÐÏÎÅÓÔÉ ÓÅÒÊÏÚÎÕ ËÒÉͦÎÁÌØÎÕ ×¦ÄÐÏצÄÁÌØΦÓÔØ ÚÁ ÃÅ.\n"
-"\n"
-"÷ ÖÏÄÎÏÍÕ ×ÉÐÁÄËÕ Î¦ Mandrakesoft, Φ ÊÏÇÏ ×ÉÒÏÂÎÉËÉ ÞÉ ÐÏÓÔÁÞÁÌØÎÉËÉ\n"
-"ÎÅ ÎÅÓÕÔØ ÖÏÄÎϧ צÄÐÏצÄÁÌØÎÏÓÔ¦ Φ ÚÁ Ñ˦ ÏÓÏÂÌÉצ, ÎÅÐÒÑͦ ÞÉ\n"
-"×ÉÐÁÄËÏצ ×ÔÒÁÔÉ (×ËÌÀÞÁÀÞÉ, ÁÌÅ ÎÅ ÏÂÍÅÖÕÀÞÉÓØ ×ÔÒÁÔÁÍÉ ÐÒÉÂÕÔËÕ,\n"
-"ÐÅÒÅÒÉ×ÁÍÉ Õ Â¦ÚÎÅÓ¦, ×ÔÒÁÔÁÍÉ ËÏÍÅÒæÊÎÉÈ ÄÁÎÉÈ ÔÁ ¦ÎÛÉÍÉ ×ÔÒÁÔÁÍÉ, Á\n"
-"ÔÁËÏÖ ×ÉÐÌÁÔÁÍÉ ÐÏ ÓÕÄÏ×ÉÍ ÐÏÚÏ×ÁÍ), ÝÏ ×ÉÎÉËÁÀÔØ ×¦Ä ×ÉËÏÒÉÓÔÁÎÎÑ,\n"
-"×ÏÌÏĦÎÎÑ ÁÂÏ ×¦Ä Ú×ÁÎÔÁÖÅÎÎÑ ÃØÏÇÏ ÐÒÏÇÒÁÍÎÏÇÏ ÚÁÂÅÚÐÅÞÅÎÎ, ÄÏ ÑËÏÇÏ\n"
-"ËÏÒÉÓÔÕ×ÁÞ ÍÁ¤ ÄÏÓÔÕРЦÓÌÑ Ð¦ÄÐÉÓÁÎÎÑ ÄÁÎÏÇÏ ÄÏÇÏ×ÏÒÕ.\n"
-"\n"
-"÷Ó¦ ÚÁÐÉÔÁÎÎÑ ÝÏÄÏ ÃØÏÇÏ ÄÏÇÏ×ÏÒÕ ÍÁÀÔØ ÎÁÐÒÁ×ÌÑÔÉÓÑ ÚÁ ÁÄÒÅÓÏÀ:\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "÷ÉÂÅÒ¦ÔØ ÓÅÒ×ÅÒ, Ú ÑËÏÇÏ Ú×ÁÎÔÁÖÉÔÉ ÐÁËÅÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "ú×'ÑÚÕÀÓØ Ú ÓÅÒ×ÅÒÏÍ ÝÏ ÐÒÏÞÉÔÁÔÉ ÓÐÉÓÏË ÎÁÑ×ÎÉÈ ÐÁËÅÔ¦×"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "÷ ÑË¦Ê ÞÁÓÏ×¦Ê ÓÍÕÚ¦ ÷É ÚÎÁÈÏÄÉÔÅÓØ?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "çÏÄÉÎÎÉË ×ÓÔÁÎÏ×ÌÅÎÏ × GMT (ÞÁÓ ÐÏ ½Ò¦ÎצÞÕ)?"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "á×ÔÏÍÁÔÉÞÎÁ ÓÉÎÈÒÏΦÚÁÃ¦Ñ ÞÁÓÕ (¦Ú ÚÁÓÔÏÓÕ×ÁÎÎÑÍ NTP)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "óÅÒ×ÅÒ NTP"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "÷¦ÄÄÁÌÅÎÉÊ ÓÅÒ×ÅÒ CUPS"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "îÅÍÁ¤ ÐÒÉÎÔÅÒÁ"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "úÁÇÁÌÏÍ"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "íÉÛÁ"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "þÁÓÏ×ÉÊ ÐÏÑÓ"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "ðÒÉÎÔÅÒ"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ðÌÁÔÁ ISDN"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "ú×ÕËÏ×Á ÐÌÁÔÁ"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "ôÅÌÅצڦÊÎÁ ÐÌÁÔÁ"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "ìÏËÁÌØΦ ÆÁÊÌÉ"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÐÁÒÏÌØ root'Á"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "âÅÚ ÐÁÒÏÌÀ"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"ãÅÊ ÐÁÒÏÌØ ÚÁÎÁÄÔÏ ÐÒÏÓÔÉÊ (צΠÐÏ×ÉÎÅÎ ÂÕÔÉ ÈÏÞÁ  %d ̦ÔÅÒ ÚÁ×ÄÏ×ÖËÉ)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "á×ÔÅÎÔÉËÁæÑ"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "á×ÔÅÎÔÉËÁÃ¦Ñ LDAP"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "dn ÎÁ ÏÓÎÏצLDAP "
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "óÅÒ×ÅÒ LDAP"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "NIS Á×ÔÅÎÔÉËÁæÑ"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "äÏÍÅÎ NIS"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "óÅÒ×ÅÒ NIS"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"óÐÅæÁÌØÎÏ ÓÔ×ÏÒÅÎÉÊ ÄÉÓË ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÚÁÂÅÚÐÅÞÉÔØ ÷ÁÍ ÍÏÖÌÉצÓÔØ\n"
-"ÚÁÐÕÓËÕ ÓÉÓÔÅÍÉ ÎÅÚÁÌÅÖÎÏ ×¦Ä Ú×ÉÞÁÊÎÏÇÏ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ. ãÅ ÍÏÖÅ\n"
-"ÚÎÁÄÏÂÉÔÉÓÑ Õ ÔÉÈ ×ÉÐÁÄËÁÈ, ËÏÌÉ ÷É ÎÅ ÂÁÖÁ¤ÔÅ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ SILO ×\n"
-"Ó×Ï§Ê ÓÉÓÔÅͦ, ÁÂÏ ËÏÌÉ ¦ÎÛÁ ÏÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ \"ÐÅÒÅÔÉÒÁ¤\" SILO, ÁÂÏ\n"
-"ËÏÌÉ SILO ÎÅ ÐÒÁÃÀ¤ Ú ÎÏ×ÏÀ ËÏÎƦÇÕÒÁæ¤À ÁÐÁÒÁÔÎÉÈ ÚÁÓϦ×. á×ÁÒ¦ÊÎÉÊ\n"
-"ÄÉÓË ÍÏÖÅ ÔÁËÏÖ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÒÁÚÏÍ Ú Mandrake Á×ÁÒ¦ÊÎÉÍ ÄÉÓËÏÍ,\n"
-"ÝÏ ÒÏÂÉÔØ ×¦ÄÎÏ×ÌÅÎÎÑ ×¦Ä ÓÅÒÊÏÚÎÉÈ ÓÉÓÔÅÍÎÉÈ ËÒÁÈ¦× ÎÁÂÁÇÁÔÏ\n"
-"ÐÒÏÓÔ¦ÛÉÍ. \n"
-"\n"
-"ñËÝÏ ÷É ÂÁÖÁ¤ÔÅ ÓÔ×ÏÒÉÔÉ Á×ÁÒ¦ÊÎÉÊ ÄÉÓË ÄÌÑ Ó×Ϥ§ ÓÉÓÔÅÍÉ ×ÓÔÁ×ÔÅ\n"
-"ÄÉÓËÅÔÕ × ÐÅÒÛÉÊ ÄÉÓËÏ×¦Ä ¦ ÎÁÔÉÓΦÔØ \"çÁÒÁÚÄ\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "ðÅÒÛÁ ÄÉÓËÅÔÁ"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "äÒÕÇÉÊ ÐÒÉ×¦Ä ÄÉÓËÅÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "ðÒÏÐÕÓÔÉÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"óÐÅæÁÌØÎÏ ÓÔ×ÏÒÅÎÉÊ ÄÉÓË ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÚÁÂÅÚÐÅÞÉÔØ ÷ÁÍ ÍÏÖÌÉצÓÔØ\n"
-"ÚÁÐÕÓËÕ ÓÉÓÔÅÍÉ ÎÅÚÁÌÅÖÎÏ ×¦Ä Ú×ÉÞÁÊÎÏÇÏ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ. ãÅ ÍÏÖÅ\n"
-"ÚÎÁÄÏÂÉÔÉÓÑ Õ ÔÉÈ ×ÉÐÁÄËÁÈ, ËÏÌÉ ÷É ÎÅ ÂÁÖÁ¤ÔÅ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ LILO (ÁÂÏ\n"
-"grub) × Ó×Ï§Ê ÓÉÓÔÅͦ, ÁÂÏ ËÏÌÉ ¦ÎÛÁ ÏÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ \"ÐÅÒÅÔÉÒÁ¤\"\n"
-"LILO, ÁÂÏ ËÏÌÉ LILO ÎÅ ÐÒÁÃÀ¤ Ú ÎÏ×ÏÀ ËÏÎƦÇÕÒÁæ¤À ÁÐÁÒÁÔÎÉÈ\n"
-"ÚÁÓϦ×. á×ÁÒ¦ÊÎÉÊ ÄÉÓË ÍÏÖÅ ÔÁËÏÖ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÒÁÚÏÍ Ú Mandrake\n"
-"Á×ÁÒ¦ÊÎÉÍ ÄÉÓËÏÍ, ÝÏ ÒÏÂÉÔØ ×¦ÄÎÏ×ÌÅÎÎÑ ×¦Ä ÓÅÒÊÏÚÎÉÈ ÓÉÓÔÅÍÎÉÈ ËÒÁȦ×\n"
-"ÎÁÂÁÇÁÔÏ ÐÒÏÓÔ¦ÛÉÍ. þÉ ÂÁÖÁ¤ÔÅ ÷É ÓÔ×ÏÒÉÔÉ Á×ÁÒ¦ÊÎÉÊ ÄÉÓË ÄÌÑ Ó×Ϥ§\n"
-"ÓÉÓÔÅÍÉ?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "ðÅÒÅÐÒÏÛÕÀ, ÎÅÍÁ¤ ÐÒÉ×ÏÄÕ ÄÉÓËÅÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"÷ÉÂÅÒ¦ÔØ ÐÒÉ×¦Ä ÄÉÓËÅÔÉ, ÑËÉÊ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÄÌÑ ÓÔ×ÏÒÅÎÎÑ\n"
-"Á×ÁÒ¦ÊÎϧ ÄÉÓËÅÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ × ÄÉÓËÏ×¦Ä %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "óÔ×ÏÒÀÀ ÄÉÓËÅÔÕ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "÷ÓÔÁÎÏ×ÌÀÀ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ ÂÌÏË"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"úÄÁ¤ÔØÓÑ Õ ÷ÁÓ ÍÁÛÉÎÁ OldWorld ÞÉ îÅצÄÏÍÁ. úÁ×ÁÎÔÁÖÕ×ÁÞ yaboot ÎÅ\n"
-"ÂÕÄÅ ÐÒÁÃÀ×ÁÔÉ Ú Ã¦¤À ÍÁÛÉÎÏÀ. õÓÔÁÎÏ×ËÁ ÂÕÄÅ ÐÒÏÄÏ×ÖÕ×ÁÔÉÓØ, ÁÌÅ ÄÌÑ\n"
-"ÚÁ×ÁÎÔÁÖÅÎÎÑ, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ËÏÒÉÓÔÕ×ÁÔÉÓØ BootX."
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "þÉ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"ðÏÍÉÌËÁ ÐÒÉ ×ÓÔÁÎÏ×ÌÅÎΦ aboot,\n"
-"ÐÏÐÒÏÂÕ×ÁÔÉ ×ÓÔÁÎÏ×ÉÔÉ ÓÉÌÏÀ, ÎÁצÔØ ÑËÝÏ ÃÅ ÒÏÚÒÕÛÉÔØ ÐÅÒÛÉÊ Ð¦ÄÒÏÚĦÌ?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-msgid "Installing bootloader"
-msgstr "÷ÓÔÁÎÏ×ÌÀÀ ÂÌÏË ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "õÓÔÁÎÏ×ËÁ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ ÎÅÕÓЦÛÎÁ. óÔÁÌÁÓÑ ÐÏÍÉÌËÁ:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"íÏÖÌÉ×Ï ×ÁÍ ÐÏÔÒ¦ÂÎÏ ÚͦÎÉÔÉ ÐÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ Õ Open Firmware ÄÌÑ\n"
-"ÔÏÇÏ, ÝÏ ÄÏÚ×ÏÌÉÔÉ ÒÏÂÏÔÕ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ. ñËÝÏ ×É ÎÅ ÂÁÞÉÔÅ ÚÁÐÒÏÛÅÎÎÑ\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ, ÎÁÔÉÓΦÔØ Command-Option-O-F\n"
-"ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ¦ ××ÅĦÔØ setenv boot-device %s,\\\\:tbxi. ð¦ÓÌÑ\n"
-"ÃØÏÇÏ ÎÁÄÒÕËÕÊÔÅ shut-down. ðÒÉ ÎÁÓÔÕÐÎÏÍÕ ÚÁ×ÁÎÔÁÖÅÎΦ ×É ÐÏÂÁÞÉÔÅ\n"
-"ЦÄËÁÚËÕ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ. "
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "îÉÚØËÉÊ"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "óÅÒÅÄΦÊ"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "÷ÉÓÏËÉÊ"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "÷ÉÂÅÒ¦ÔØ Ò¦×ÅÎØ ÚÁÈÉÓÔÕ"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "÷ÓÔÁ×ÔÅ ÞÉÓÔÕ ÄÉÓËÅÔÕ × ÄÉÓËÏ×¦Ä %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "óÔ×ÏÒÅÎÎÑ Á×ÔÏÕÓÔÁÎÏ×ÏÞÎϧ ÄÉÓËÅÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"äÅÑ˦ ËÒÏËÉ ÎÅ ÚÁ×ÅÒÛÅΦ.\n"
-"\n"
-"÷É Ä¦ÊÓÎÏ ÈÏÞÅÔÅ ÐÒÉÐÉÎÉÔÉ ÚÁÒÁÚ?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"÷¦ÔÁÎÎÑ, ÕÓÔÁÎÏ×ËÁ ÚÁ˦ÎÞÅÎÁ.  ÷ÉÊͦÔØ Ú ÄÉÓËÏ×ÏÄ¦× ÚÁ×ÁÎÔÁÖÕ×ÁÌØΦ\n"
-"ÎÏÓ¦§ ¦ ÐÏÔ¦Í ÎÁÔÉÓΦÔØ Return ÄÌÑ ÐÅÒÅ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ.\n"
-"\n"
-"äÌÑ ¦ÎÆÏÒÍÁæ§ ÐÒÏ ×ÉÐÒÁ×ÌÅΦ ÐÏÍÉÌËÉ ÚÎÁÊÄÅΦ × ÃÍÊ ×ÅÒÓ¦§\n"
-"Mandrake Linux Ú×ÅÒΦÔØÓÑ ÄÏ ÒÏÚĦÌÕ Errata ÎÁ ÓÅÒ×ÅÒ¦\n"
-"http://www.mandrakelinux.com/. \n"
-"\n"
-"äÏצÄËÉ ÐÒÏ ËÏÎƦÇÕÒÁæÀ ÷ÁÛϧ ÓÉÓÔÅÍÉ ÐÒÉ×ÅÄÅΦ × ÐÏÓÔ-ÕÓÔÁÎÏ×ÏÞÎÏÍÕ\n"
-"ÒÏÚĦ̦ ïƦæÊÎÏÇÏ ëÅÒ¦×ÎÉÃÔ×Á ëÏÒÉÓÔÕ×ÁÞÁ Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "óÔ×ÏÒÅÎÎÑ Á×ÔÏÕÓÔÁÎÏ×ÏÞÎϧ ÄÉÓËÅÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"ñËÝÏ ÐÏÔÒ¦ÂÎÏ, Á×ÔÏÍÁÔÉÚÏ×ÁÎÁ ÕÓÔÁÎÏ×ËÁ ÍÏÖÅ ÂÕÔÉ ÐÏ×ΦÓÔÀ\n"
-"Á×ÔÏÍÁÔÉÞÎÏ. ÷ ÃØÏÍÕ ×ÉÐÁÄËÕ ÕÓÔÁÎÏ×ËÁ ÂÕÄÅ ÍÁÔÉ ÐÏ×ÎÉÊ ËÏÎÔÒÏÌØ ÎÁÄ\n"
-"×ÁÛÉÍ ÄÉÓËÏÍ!! (ôÁËÉÊ ÔÉÐ ÕÓÔÁÎÏ×ËÉ × ÏÓÎÏ×ÎÏÍÕ Ð¦ÄÈÏÄÉÔØ ÄÌÑ\n"
-"ÕÓÔÁÎÏ×ËÉ ÎÁ ¦ÎÛ¦Ê ÓÉÓÔÅͦ)\n"
-"\n"
-"íÏÖÌÉ×Ï ×É ÚÁÈÏÞÅÔÅ ÐÏ×ÔÏÒÉÔÉ ÕÓÔÁÎÏ×ËÕ.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "á×ÔÏÍÁÔÉÚÏ×ÁÎÁ"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "ðÏ×ÔÏÒÉÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "úÂÅÒÅÇÔÉ ×ÉÂ¦Ò ÐÁËÅÔ¦×"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "õÓÔÁÎÏ×ËÁ Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> Í¦Ö ÅÌÅÍÅÎÔÁÍÉ  |  <Space> ×ÉÂ¦Ò  |  <F12> ÎÁÓÔÕÐÎÉÊ ÅËÒÁÎ"
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "ÎÅÍÁ¤ kdesu"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "äÏÓצÄÞÅÎÉÊ"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "úÁÞÅËÁÊÔÅ, ÂÕÄØ-ÌÁÓËÁ"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "òÏÚÛÉÒÉÔÉ ÄÅÒÅ×Ï"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "óÔÉÓÎÕÔÉ ÄÅÒÅ×Ï"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "ðÅÒÅÍÉËÎÕÔÉ Í¦Ö ÐÏËÁÚÏÍ ÐÏ ÇÒÕÐÁÍ ¦ Ú×ÉÞÁÊÎÉÍ ÓÐÉÓËÏÍ"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "îÅÏÄÎÏÚÎÁÞΦÓÔØ (%s). ÷ËÁÖ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÔÏÞΦÛÅ\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "îÅ×ÄÁÌÉÊ ×ɦÒ, ÓÐÒÏÂÕÊÔÅ ÝÅ ÒÁÚ\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (ÒÅËÏÍÅÎÄÏ×ÁÎÉÊ %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "÷ÁÛ ×ɦÒ? (ÒÅËÏÍÅÎÄÏ×ÁÎÉÊ %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "÷ÁÛ ×ɦÒ? (ÒÅËÏÍÅÎÄÏ×ÁÎÉÊ %s, ××ÅĦÔØ `none' ÄÌÑ Î¦ÑËÏÇÏ) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "þÅÓØËÁ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "î¦ÍÅÃØËÁ"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "ä×ÏÒÁËÁ"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "¶ÓÐÁÎÓØËÁ"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "æ¦ÎÓØËÁ"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "æÒÁÎÃÕÚØËÁ"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "îÏÒ×ÅÚØËÁ"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "ðÏÌØÓØËÁ"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "òÏÓ¦ÊÓØËÁ"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "û×ÅÄÓØËÁ"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "âÒÉÔÁÎÓØËÁ ËÌÁצÁÔÕÒÁ"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "ëÌÁצÁÔÕÒÁ óûá"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "áÌÂÁÎÓØËÁ"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "÷¦ÒÍÅÎÓØËÁ (ÓÔÁÒÁ)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "÷¦ÒÍÅÎÓØËÁ (ÄÒÕËÁÒÓØËÁ ÍÁÛÉÎËÁ)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "÷¦ÒÍÅÎÓØËÁ (ÆÏÎÅÔÉÞÎÁ)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "áÚÅÒÂÁÊÄÖÁÎÓØËÁ (ÌÁÔÉÎÁ)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "âÅÌØǦÊÓØËÁ"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "âÏÌÇÁÒÓØËÁ"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "âÒÁڦ̦ÊÓØËÁ (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "â¦ÌÏÒÕÓØËÁ"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "û×ÅÊÃÁÒÓØËÁ (ΦÍÅÃØËÁ ÒÏÚËÌÁÄËÁ)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "û×ÅÊÃÁÒÓØËÁ (ÆÒÁÎÃÕÚØËÁ ÒÏÚËÌÁÄËÁ)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "þÅÓØËÁ (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "î¦ÍÅÃØËÁ (ÂÅÚ ÍÅÒÔ×ÉÈ ËÌÁצÛ)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "äÁÔÓØËÁ"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "ä×ÏÒÁËÁ (óûá)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "ä×ÏÒÁËÁ (îÏÒ×ÅÚØËÁ)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "åÓÔÏÎÓØËÁ"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "çÒÕÚÉÎÓØËÁ (ÒÏÓ¦ÊÓØËÁ ÒÏÚËÌÁÄËÁ)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "çÒÕÚÉÎÓØËÁ (ÌÁÔÉÎÓØËÁ ÒÏÚËÌÁÄËÁ)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "çÒÅÃØËÁ"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "õÇÏÒÓØËÁ"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "èÏÒ×ÁÔÓØËÁ"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "¶ÚÒÁ§ÌØÓØËÁ"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "¶ÚÒÁ§ÌØÓØËÁ (ÆÏÎÅÔÉÞÎÁ)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "¶ÒÁÎÓØËÁ"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "¶ÓÌÁÎÄÓØËÁ"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "¶ÔÁ̦ÊÓØËÁ"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "ñÐÏÎÓØËÁ 106 ËÌÁצÛ"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "ëÏÒÅÊÓØËÁ ËÌÁצÁÔÕÒÁ"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "ìÁÔÉÎÏ-ÁÍÅÒÉËÁÎÓØËÁ"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "ìÉÔÏ×ÓØËÁ AZERTY (ÓÔÁÒÁ)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "ìÉÔÏ×ÓØËÁ AZERTY (ÎÏ×Á)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "ìÉÔÏ×ÓØËÁ \"ÃÉÆÒÏ×ÉÊ ÒÑÄ\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "ìÉÔÏ×ÓØËÁ \"ÆÏÎÅÔÉÞÎÁ\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-msgid "Latvian"
-msgstr "ìÁÔצÊÓØËÁ"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "íÁËÅÄÏÎÓØËÁ"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "äÁÔÓØËÁ"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "ðÏÌØÓØËÁ (ÒÏÚËÌÁÄËÁ qwerty)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "ðÏÌØÓØËÁ (ÒÏÚËÌÁÄËÁ qwertz)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "ðÏÒÔÕÇÁÌØÓØËÁ"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "ëÁÎÁÄÓØËÁ (ë×ÅÂÅË)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "òÕÍÕÎÓØËÁ (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "òÕÍÕÎÓØËÁ (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "òÏÓ¦ÊÓØËÁ (ñ÷åòôé)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "óÌÏ×ÅÎÓØËÁ"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "óÌÏ×ÁÃØËÁ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "óÌÏ×ÁÃØËÁ (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "óÅÒÂÓØËÁ (ËÉÒÉÌÉÃÑ)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "ôÁÊÓØËÁ ËÌÁצÁÔÕÒÁ"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr "ôÁÄÖÉÃØËÁ ËÌÁצÁÔÕÒÁ"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "ôÕÒÅÃØËÁ (ÔÒÁÄÉæÊÎÁ \"F\" ÍÏÄÅÌØ)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "ôÕÒÅÃØËÁ (ÔÒÁÄÉæÊÎÁ \"Q\" ÍÏÄÅÌØ)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "õËÒÁ§ÎÓØËÁ"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "ëÌÁצÁÔÕÒÁ óûá (ͦÖÎÁÒÏÄÎÁ)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "÷'¤ÔÎÁÍÓØËÁ \"ÃÉÆÒÏ×ÉÊ ÒÑÄ\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "àÇÏÓÌÁ×ÓØËÁ (ÌÁÔÉÎÓØËÁ)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "ëÒÕÇÏצ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "óÐÏÞÁÔËÕ Ú¦ÔÒ¦ÔØ ÌÏǦÞÎÉÊ ÔÏÍ\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "íÉÛÁ Sun"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "óÔÁÎÄÁÒÔÎÉÊ"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "ú×ÉÞÁÊÎÉÊ ÔÉÐ PS2 ÍÉÛ¦ Ú ËÏ̦ÝÁÔËÏÍ"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "ïÄÎÏ ËÎÏÐÏÞÎÁ"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "úÁÇÁÌØÎÅ"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "ëÏ̦ÝÁÔËÏ"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "ÐÏÓ̦ÄÏ×ÎÉÊ"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "ú×ÉÞÁÊÎÁ 2È ËÎÏÐÏÞÎÁ ÍÉÛËÁ"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "ú×ÉÞÁÊÎÁ 3È ËÎÏÐÏÞÎÁ ÍÉÛËÁ"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "ôÉÐÕ Logitech CC"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "ôÉÐÕ MM"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serial, ÔÉÐ C7)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "ä×ÏÈ ËÎÏÐÏÞÎÁ"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "ôÒØÏÈ ËÎÏÐÏÞÎÁ"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "î¦ÞÏÇÏ"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "âÅÚ ÍÉÛËÉ"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ, ÂÕÄØ-ÌÁÓËÁ"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "ýÏ ÁËÔÉצÚÕ×ÁÔÉ ÍÉÛËÕ, "
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "ðïóõîøôå ëïì¶ýáôëï!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "æ¦ÎÓØËÁ"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "äÁ̦ ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- ðÏÐÅÒÅÄΦÊ"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "÷ÓŠצÒÎÏ?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "ú'¤ÄÎÁÔÉÓÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"îÁʦÌØÛ ÐÏÛÉÒÅÎÉÊ ÓÐÏӦ Ú'¤ÄÎÁÎÎÑ ÞÅÒÅÚ adsl - ÃÅ ÚÁ ÄÏÐÏÍÏÇÏÀ\n"
-"pppoe. ïÄÎÁË, ÄÅÑ˦ Ú'¤ÄÎÁÎÎÑ ËÏÒÉÓÔÕÀÔØÓÑ Ô¦ÌØËÉ pptp, ÎÅ×ÅÌÉËÁ\n"
-"˦ÌØ˦ÓÔØ ËÏÒÉÓÔÕ¤ÔØÓÑ dhcp.  ñËÝÏ ÷É ÎÅ ÚÎÁ¤ÔÅ ÎÁÐÅ×ÎÅ ×ÉÂÅÒ¦ÔØ\n"
-"\"×ÖÉ×ÁÔÉ pppoe\"."
-
-#: ../../network/adsl.pm_.c:22
-#, fuzzy
-msgid "Alcatel speedtouch usb"
-msgstr "speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "ËÏÒÉÓÔÕ×ÁÔÉÓÑ dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "×ÖÉ×ÁÔÉ pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "×ÖÉ×ÁÔÉ pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"ñËÉÊ dhcp Ë̦¤ÎÔ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ?\n"
-"óÔÁÎÄÁÒÔÎÉÊ Ë̦¤ÎÔ - dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÓËÏÎƦ­ÕÒÏ×ÁÎÏÇÏ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦ ethernet. îÅ\n"
-"ÍÏÖÎÁ ×ÓÔÁÎÏ×ÉÔÉ Ú'¤ÄÎÁÎÎÑ ÃØÏÇÏ ÔÉÐÕ."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "÷ÉÂÅÒ¦ÔØ ¦ÎÔÅÒÆÅÊÓ ÍÅÒÅÖ¦"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"÷ÉÂÅÒ¦ÔØ ÑËÕ ÐÌÁÔÕ ÍÅÒÅÖ¦ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÁÔÉ ÄÌÑ Ú'¤ÄÎÁÎÎÑ Ú\n"
-"¶ÎÔÅÒÎÅÔÏÍ"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ÎÅ ÚÎÁÊÄÅÎÁ ÐÌÁÔÁ ÍÅÒÅÖ¦"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "ëÏÎƦÇÕÒÕÀ ÍÅÒÅÖÕ"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr "Ú"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "îÁÚ×Á ÈÏÓÔÁ"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "ðÏͦÞÎÉË ËÏÎƦÇÕÒÁæ§ ÍÅÒÅÖ¦"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "úÏ×ΦÛÎ¦Ê ÍÏÄÅÍ ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "÷ÎÕÔÒ¦ÛÎÑ ÐÌÁÔÁ ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "ñËÉÊ ÔÉÐ Ú'¤ÄÎÁÎÎÑ ISDN ÷É ÍÁ¤ÔÅ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"ñËÕ ËÏÎƦ­ÕÒÁæÀ ISDN ÷É ÂÁÖÁ¤ÔÅ ×ÓÔÁÎÏ×ÉÔÉ?\n"
-"\n"
-"* óÔÁÒÁ ËÏÎƦ­ÕÒÁÃ¦Ñ ×ÉËÏÒÉÓÔÕ×Õ¤ isdn4net. äÏÓÉÔØ ÐÏÔÕÖΦ ÚÁÓÏÂÉ\n"
-"×ÈÏÄÑÔØ ÄÏ ÓËÌÁÄÕ ÐÁËÅÔÕ, ÁÌÅ ÊÏÇÏ ÄÏÓÉÔØ ÓËÌÁÄÎÏ ÎÁÌÁÇÏÄÉÔÉ, ¦ צΠÎÅ\n"
-"¤ ÓÔÁÎÄÁÒÔÎÉÍ.\n"
-"\n"
-"* îÏ×Á ËÏÎƦ­ÕÒÁÃ¦Ñ ÐÒÏÓÔ¦ÛÁ ÄÌÑ ÒÏÚÕͦÎÎÑ, ¦ÌØÛ ÓÔÁÎÄÁÒÔÉÚÏ×ÁÎÁ, ÁÌÅ\n"
-"ÍÁ¤ ÍÅÎÛÅ ¦ÎÓÔÒÕÍÅÎÔÁÒ¦À.\n"
-"\n"
-"íÉ ÒÅËÏÍÅÎÄÕ¤ÍÏ ÐÒÏÓÔÕ ËÏÎƦ­ÕÒÁæÀ.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "îÏ×Á ËÏÎƦ­ÕÒÁÃ¦Ñ (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "óÔÁÒÁ ËÏÎƦ­ÕÒÁÃ¦Ñ (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ISDN"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"÷ÉÂÅÒ¦ÔØ Ó×ÏÇÏ ÐÒÏ×ÁÊÄÅÒÁ.\n"
-"ñËÝÏ ÊÏÇÏ ÎÅÍÁ¤ × ÓÐÉÓËÕ, ×ÉÂÅÒ¦ÔØ ¶ÎÛÉÊ"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "´×ÒÏÐÅÊÓØËÉÊ ÐÒÏÔÏËÏÌ"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "´×ÒÏÐÅÊÓØËÉÊ ÐÒÏÔÏËÏÌØ (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "ðÒÏÔÏËÏÌ ÄÌÑ ×ÓØÏÇÏ ¦ÎÛÏÇÏ ÓצÔÕ"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"ðÒÏÔÏËÏÌ ÄÌÑ ×ÓØÏÇÏ ¦ÎÛÏÇÏ ÓצÔÕ \n"
-" ÂÅÚ D-ËÁÎÁÌÕ (×ÉĦÌÅÎÉÈ Ì¦Î¦Ê)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "ñËÉÊ ÐÒÏÔÏËÏÌ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "ñËÉÊ ÔÉÐ ËÁÒÔËÉ ÷É ÍÁ¤ÔÅ"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "îÅ ÚÎÁÀ"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"ñËÝÏ ÷É ÍÁ¤ÔÅ ÐÌÁÔÕ ISA, ÚÎÁÞÅÎÎÑ ÎÁ ÎÁÓÔÕÐÎÏÍÕ ÅËÒÁΦ ÍÁÀÔØ ÂÕÔÉ\n"
-"ËÏÒÅËÔÎÉÍÉ.\n"
-"\n"
-"ñËÝÏ ÷É ÍÁ¤ÔÅ ÐÌÁÔÕ PCMCIA, ÷É ÐÏ×ÉÎΦ ÚÎÁÔÉ IRQ ÔÁ IO ÷ÁÛϧ ÐÌÁÔÉ.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "÷¦ÄͦÎÉÔÉ"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "ðÒÏÄÏ×ÖÕ×ÁÔÉ"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "ñËÁ ÷ÁÛÁ ISDN ÐÌÁÔÁ?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"úÎÁÊÄÅÎÁ ISDN PCI ÐÌÁÔÁ, ÁÌÅ ÎÅצÄÏÍÏÇÏ ÔÉÐÕ. ÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÏÄÎÕ Ú "
-"ÐÌÁÔ PCI ÎÁ ÎÁÓÔÕÐÎÏÍÕ ÅËÒÁΦ."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "îÅ ÚÎÁÊÄÅÎÏ ÐÌÁÔÉ ISDN PCI. ÷ÉÂÅÒ¦ÔØ ÏÄÎÕ ¦Ú ÐÌÁÔ Õ ÎÁÓÔÕÐÎÏÍÕ ×¦ËΦ."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÁ ЦÄËÌÀÞÅÎÉÊ ÷ÁÛ ÍÏÄÅÍ?"
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "ðÁÒÁÍÅÔÒÉ Ú×'ÑÚËÕ ÐÏ ÍÏÄÅÍÕ"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "îÁÚ×Á Ú×'ÑÚËÕ"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "îÏÍÅÒ ÔÅÌÅÆÏÎÕ"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "ID ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "úÁ ÄÏÐÏÍÏÇÏÀ ÓËÒÉÐÔÁ"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "þÅÒÅÚ ÔÅÒͦÎÁÌ"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "îÁÚ×Á ÄÏÍÅÎÕ"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "ðÅÒÛÉÊ ÓÅÒ×ÅÒ DNS (ÎÅÏÂÏ×'ÑÚËÏ×Ï)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "äÒÕÇÉÊ ÓÅÒ×ÅÒ DNS(ÎÅÏÂÏ×'ÑÚËÏ×Ï)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"÷É ÍÏÖÅÔŠצÄ'¤ÄÎÁÔÉÓØ ÁÂÏ ÚͦÎÉÔÉ ËÏÎƦ­ÕÒÁæÀ Ó×Ϥ§ ÍÅÒÅÖ¦."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"÷É ÍÏÖÅÔÅ ÚͦÎÉÔÉ ÎÁÓÔÒÏÊËÉ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÓÔÁÎÏ×ÌÅÎÏ."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"÷É ÚÁÒÁÚ Ú'¤ÄÎÁΦ Ú ¦ÎÔÅÒÎÅÔÏÍ."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "÷É ÚÁÒÁÚ ÎÅ Ú'¤ÄÎÁΦ Ú ¦ÎÔÅÒÎÅÔÏÍ."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "ú×'ÑÚÁÔÉÓÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "÷¦Ä'¤ÄÎÁÔÉÓÑ ×¦Ä ¦ÎÔÅÒÎÅÔÕ"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "îÁÓÔÒϧÔÉ Ú'¤ÄÎÁÎÎÑ ÍÅÒÅÖ¦ (ÌÏËÁÌØÎÁ ÍÅÒÅÖÁ ÁÂÏ ¦ÎÔÅÒÎÅÔ)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ ¦ ËÏÎƦÇÕÒÁæÑ"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "úÁÒÁÚ ÂÕÄÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ Ú'¤ÄÎÁÎÎÑ %s."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"úÁÒÁÚ ÂÕÄÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ Ú'¤ÄÎÁÎÎÑ %s.\n"
-"\n"
-"\n"
-"îÁÔÉÓΦÔØ \"çÁÒÁÚÄ\" ÄÌÑ ÐÒÏÄÏ×ÄÖÅÎÎÑ"
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"þÅÒÅÚ ÔÅ, ÝÏ ×É ÒÏÂÉÔÅ ÕÓÔÁÎÏ×ËÕ ÐÏ ÍÅÒÅÖ¦, ×ÁÛÁ ÍÅÒÅÖÁ ×ÖÅ\n"
-"ÓËÏÎƦ­ÕÒÏ×ÁÎÁ.  \n"
-"\n"
-"îÁÔÉÓΦÔØ ÎÁ çÁÒÁÚÄ ÝÏ ÚÂÅÒÅÇÔÉ ÕÓÔÁÎÏ×ËÉ ÍÅÒÅÖ¦, ÁÂÏ ÎÁ ÷¦ÄͦÎÉÔÉ\n"
-"ÄÌÑ ÔÏÇÏ, ÝÏ ÚͦÎÉÔÉ ÕÓÔÁÎÏ×ËÉ Ú'¤ÄÎÁÎÎÑ ¦ÎÔÅÒÎÅÔÁ ¦ ÍÅÒÅÖ¦.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ ÄÏ ÐÏͦÞÎÉËÁ ÕÓÔÁÎÏ×ËÉ ÍÅÒÅÖ¦.\n"
-"\n"
-"úÁÒÁÚ ×ÁÛÁ ÍÅÒÅÖÁ ÔÁ ¦ÎÔÅÒÎÅÔ Ú'¤ÄÎÁÎÎÑ ÂÕÄÕÔØ ÎÁÓÔÒϤΦ.  ñËÝÏ ×É ÎÅ\n"
-"ÈÏÞÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓØ Á×ÔÏÍÁÔÉÞÎÉÍ ×ÉÚÎÁÞÅÎÎÑÍ, צÄͦΦÔØ ×ÉÂ¦Ò ÏÐæ§.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÒÏƦÌØ ÄÌÑ ËÏÎƦÇÕÒÁæ§:"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "÷ÉÚÎÁÞÁÀ ÐÒÉÓÔÒϧ..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "ú×ÉÞÁÊÎÅ Ú'¤ÄÎÁÎÎÑ ÐÏ ÍÏÄÅÍÕ"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "ÚÎÁÊÄÅÎÏ ÎÁ ÐÏÒÔÕ %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ú'¤ÄÎÁÎÎÑ ISDN"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "ÚÎÁÊÄÅÎÏ %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ú'¤ÄÎÁÎÎÑ ADSL"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "úÎÁÊÄÅÎÏ ÎÁ ¶ÎÔÅÒÆÅÊÓ¦ %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "ëÁÂÅÌØÎÅ Ú'¤ÄÎÁÎÎÑ"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "úÎÁÊÄÅÎÏ ËÁÂÅÌØÎÅ Ú'¤ÄÎÁÎÎÑ"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "ú'¤ÄÎÁÎÎÑ ÞÅÒÅÚ ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "ÚÎÁÊÄÅÎÏ ÐÌÁÔÁ (É) Ethernet "
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "÷ÉÂÅÒ¦ÔØ Ú'¤ÄÎÁÎÎÑ, ÑËÅ ÷É ÈÏÞÅÔÅ ÎÁÓÔÒϧÔÉ"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"÷É ÎÁÓÔÒϧÌÉ Ë¦ÌØËÁ ÓÐÏÓÏÂ¦× Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÆÏÒÍÁæÊÎÉÍÉ ÔÅÎÅÔÁÍÉ.\n"
-"÷ÉÂÅÒ¦ÔØ ÏÄÉÎ ¦Ú ÎÉÈ, ÑËÉÍ ÷É ÂÕÄÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓØ.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "ú'¤ÄÎÁÎÎÑ Ú ÔÅÎÅÔÁÍÉ"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "þÉ ÷É ÈÏÞÅÔŠצÄËÒÉ×ÁÔÉ Ú'¤ÄÎÁÎÎÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"ðÒÏÂÌÅÍÁ ÐÒÉ ÐÅÒÅÚÁÐÕÓËÕ ÍÅÒÅÖ¦:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"÷¦ÔÁ¤ÍÏ, ËÏÎƦ­ÕÒÁÃ¦Ñ ÍÅÒÅÖ¦ ÚÁ˦ÎÞÅÎÁ.\n"
-"\n"
-"ôÅÐÅÒ ÃÑ ËÏÎƦ­ÕÒÁÃ¦Ñ ÂÕÄÅ ÚÁÓÔÏÓÏ×ÁÎÁ ÄÏ ×ÁÛϧ ÓÉÓÔÅÍÉ.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"ð¦ÓÌÑ ÔÏÇÏ, ÑË ÃÅ ÚÁ˦ÎÞÅÎÏ, ÂÁÖÁÎÏ ÐÅÒÅ×ÁÎÔÁÖÉÔÉ X ÓÅÒ×ÅÒ ÄÌÑ ÔÏÇÏ,\n"
-"ÝÏ ÐÏÚÂÕÔÉÓÑ ÐÒÏÂÌÅÍÉ ¦Ú ÚͦÎÏÀ ÎÁÚ×É ÈÏÓÔÁ."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"õ÷áçá: ãÅÊ ÐÒÉÓÔÒ¦Ê ÂÕÌÏ ÐÏÐÅÒÅÄÎØÏ ÎÁÓÔÒϤÎÏ ÄÌÑ Ú'¤ÄÎÁÎÎÑ Ú ¶ÎÔÅÒÎÅÔÏÍ.\n"
-"\n"
-"ðÒÏÓÔÏ ÎÁÔÉÓΦÔØ \"çÁÒÁÚÄ\" ÝÏ ÚÂÅÒÅÇÔÉ ËÏÎƦ­ÕÒÁæÀ ÐÒÉÓÔÒÏÀ.\n"
-"úͦÎÁ ÐÏÌ¦× ÎÉÖÞÅ ÐÒÉ×ÅÄÅ ÄÏ ÚͦÎÉ ËÏÎƦ­ÕÒÁæ§ ÐÒÉÓÔÒÏÀ."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"÷×ÅĦÔØ, ÂÕÄØ-ÌÁÓËÁ, ËÏÎƦÇÕÒÁæÀ IP ÄÌÑ Ã¦¤§ ÍÁÛÉÎÉ.  ëÏÖÅÎ ÐÕÎËÔ\n"
-"ÔÒÅÂÁ ××ÏÄÉÔÉ ÑË IP ÁÄÒÅÓÕ × ÔÏÞËÏ×Ï-ÄÅÓÑÔËÏ×¦Ê ÎÏÔÁæ§ (ÑË,\n"
-"ÎÁÐÒÉËÌÁÄ, 1.2.3.4)"
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "ëÏÎƦÇÕÒÕÀ ÐÒÉÓÔÒ¦Ê ÍÅÒÅÖ¦ %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (%s ÄÒÁÊ×ÅÒ)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP-ÁÄÒÅÓÁ"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "íÁÓËÁ ÍÅÒÅÖ¦"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "á×ÔÏÍÁÔÉÞÎÁ ËÏÎƦÇÕÒÁÃ¦Ñ IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ÁÄÒÅÓÁ ÍÁ¤ ÂÕÔÉ Õ ÆÏÒÍÁÔ¦ 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"÷×ÅĦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁÚ×Õ ÷ÁÛÏÇÏ ÈÏÓÔÁ. îÁÚ×Á ÈÏÓÔÁ ÐÏ×ÉÎÎÁ ÂÕÔÉ\n"
-"ÐÏ×ΦÓÔÀ Ë×Á̦ƦËÏ×ÁÎÏÀ ÎÁÚ×ÏÀ ÈÏÓÔÁ, ÔÁËÏÀ, ÑË, ÎÁÐÒÉËÌÁÄ,\n"
-"``mybox.mylab.myco.com''.\n"
-"÷É ÔÁËÏÖ ÍÏÖÅÔÅ ××ÅÓÔÉ IP ÁÄÒÅÓÕ ÛÌÀÚÁ ÑËÝÏ ÷É ÔÁËÉÊ ÍÁ¤ÔÅ."
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "óÅÒ×ÅÒ DNS"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "ûÌÀÚ"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "ûÌÀÚÏ×ÉÊ ÐÒÉÓÔÒ¦Ê"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÐÒÏËÓ¦"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "ðÒÏËÓ¦ HTTP"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "ðÒÏËÓ¦ FTP"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-"úÁÐÉÓÁÔÉ id ÐÌÁÔÉ ÍÅÒÅÖ¦ (ÍÏÖÅ ÚÎÁÄÏÂÉÔØÓÑ ÐÒÉ ËÏÒÉÓÔÕ×ÁÎΦ ÍϦÌØÎÉÍ "
-"ËÏÍÐ'ÀÔÅÒÏÍ)"
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "÷ÉÇÌÑÄ ÐÒÏËÓ¦ ÍÁ¤ ÂÕÔÉ http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "÷ÉÇÌÑÄ ÐÒÏËÓ¦ ÍÁ¤ ÂÕÔÉ ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "þÉ ÷É ÈÏÞÅÔÅ ÓÐÒÏÂÕ×ÁÔÉ Ð¦ÄËÌÀÞÉÔÉÓÑ ÄÏ ¦ÎÔÅÒÎÅÔÕ ÚÁÒÁÚ?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "÷ÉÐÒÏÂÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑ..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "óÉÓÔÅÍÁ Ú'¤ÄÎÁÎÁ Ú ¦ÎÔÅÒÎÅÔÏÍ."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "ú ÔÏÞËÉ ÚÏÒÕ ÂÅÚÐÅËÉ, ×É ÂÕÄÅÔÅ ÚÁÒÁÚ ×¦Ä'¤ÄÎÁΦ."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"óÉÓÔÅÍÁ ÚÄÁ¤ÔØÓÑ ÎŠЦÄËÌÀÞÅÎÁ ÄÏ ¦ÎÔÅÒÎÅÔÕ.\n"
-"óÐÒÏÂÕÊÔÅ ÚͦÎÉÔÉ ËÏÎƦÇÕÒÁæÀ Ó×ÏÇÏ Ú'¤ÄÎÁÎÎÑ."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ Ú'¤ÄÎÁÎÎÑ"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "âÕÄØ-ÌÁÓËÁ ÚÁÐÏ×ΦÔØ ÁÂÏ ×ÉÂÅÒ¦ÔØ ÐÏÌÅ ×ÎÉÚÕ"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "ðÅÒÅÐÉÎ ËÁÒÔËÉ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "ðÁÍ'ÑÔØ ËÁÒÔËÉ (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "÷/÷ ËÁÒÔËÉ"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "÷/÷_0 ËÁÒÔËÉ"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "÷/÷_1 ËÁÒÔËÉ"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "÷ÁÛ ÏÓÏÂÉÓÔÉÊ ÎÏÍÅÒ ÔÅÌÅÆÏÎÕ"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "îÁÚ×Á ÐÒÏ×ÁÊÄÅÒÁ (ÔÏÂÔÏ provider.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "îÏÍÅÒ ÔÅÌÅÆÏÎÕ ÐÒÏ×ÁÊÄÅÒÁ"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "1Ê DNS ÐÒÏ×ÁÊÄÅÒÁ (ÎÅÏÂÏ×'ÑÚËÏ×Ï)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "2Ê DNS ÐÒÏ×ÁÊÄÅÒÁ  (ÎÅÏÂÏ×'ÑÚËÏ×Ï)"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "÷ÉÂÅÒ¦ÔØ ËÒÁ§ÎÕ"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "òÅÖÉÍ Ú×'ÑÚËÕ ÞÅÒÅÚ ÍÏÄÅÍ"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "û×ÉÄ˦ÓÔØ Ú×'ÑÚËÕ"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "úÁÔÒÉÍËÁ ÐÅÒÅÄ ÚÁËÒÉÔÔÑÓ Ú×'ÑÚËÕ (ÓÅË)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "òÁÈÕÎÏË ËÏÒÉÓÔÕ×ÁÞÁ (¦Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "ðÁÒÏÌØ Õ ÐÒÏ×ÁÊÄÅÒÁ"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "òÏÚÛÉÒÅΦ ЦÄÒÏÚĦÌÉ ÎŠЦÄÔÒÉÍÕÀÔØÓÑ ÎÁ Ã¦Ê ÐÌÁÔÆÏÒͦ."
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"õ ÷ÁÓ ¤ ÐÒÏͦÖÏË × ÔÁÂÌÉæ ÒÏÚĦ̦×, ÁÌÅ Ñ ÎÅ ÍÏÖÕ ÎÉÍ ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ.\n"
-"´ÄÉÎÉÍ Ò¦ÛÅÎÎÑÍ ÍÏÖÅ ÂÕÔÉ ÐÅÒÅÓÕÎÕÔÉ ÷ÁÛ¦ ÏÓÎÏ×Φ ЦÄÒÏÚĦÌÉ ÔÁË, ÝÏÂ\n"
-"ÐÒÏͦÖÏË ÂÕ× ÐÏÒÕÞ Ú ÒÏÚÛÉÒÅÎÉÍÉ Ð¦ÄÒÏÚĦÌÁÍÉ."
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "÷¦ÄÎÏ×ÌÅÎÎÑ Ú ÆÁÊÌÕ %s ÎÅ ÓÐÒÁÃÀ×ÁÌÏ: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "ðÏÍÉÌËÁ ÐÒÉ ÚÁÐÉÓ¦ Õ ÆÁÊÌ %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"ýÏÓØ ÎÅÄÏÂÒŠצÄÂÕ×Á¤ÔØÓÑ ÎÁ ×ÁÛÏÍÕ ÄÉÓËÕ.\n"
-"ôÅÓÔÕ×ÁÎÎÑ Ã¦Ì¦ÓÎÏÓÔ¦ ÄÁÎÉÈ ÂÕÌÏ ÎÅ×ÄÁÌÉÍ.\n"
-"ãÅ ÏÚÎÁÞÁ¤, ÝÏ ÚÁÐÉÓ ÂÕÄØ-ÞÏÇÏ ÎÁ ÄÉÓË ÍÁÔÉÍÅ ÓÕÍÎÉÊ ÒÅÚÕÌØÔÁÔ."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ÐÏÔÒ¦ÂÎÉÊ"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "×ÁÖÌÉ×ÉÊ"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "ÄÕÖÅ ÇÁÒÎÉÊ"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "ÇÁÒÎÏ"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ÍÏÖÌÉ×Ï"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System (óЦÌØÎÁ ÓÉÓÔÅÍÁ ÄÒÕËÕ ÄÌÑ àΦËÓ)"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation (ÎÏ×Å ÐÏËÏ̦ÎÎÑ)"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "÷¦ÄÄÁÌÅÎÉÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "ðÒÉÎÔÅÒ ÎÁ צÄÄÁÌÅÎÏÍÕ ÓÅÒ×ÅÒ¦ CUPS"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "ðÒÉÎÔÅÒ ÎÁ צÄÄÁÌÅÎÏÍÕ ÓÅÒ×ÅÒ¦ lpd"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "ðÒÉÎÔÅÒ × ÍÅÒÅÖ¦ (ÓÏËÅÔ)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "ðÒÉÎÔÅÒ ÎÁ ÓÅÒ×ÅÒ¦ SMB/Windows 95/98/NT "
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "ðÒÉÎÔÅÒ ÎÁ NetWare ÓÅÒ×ÅÒ¦"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "÷×ÅĦÔØ URI ÐÒÉÓÔÒÏÀ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "ðÅÒÅÎÁÐÒÁ×ÉÔÉ ÒÏÂÏÔÕ ÐÏ ËÁÎÁÌÕ × ËÏÍÁÎÄÕ"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "îÅצÄÏÍÁ ÍÏÄÅÌØ"
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(ÎÁ %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "(ÎÁ Ã¦Ê ÍÁÛÉΦ)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "÷ÉÂÅÒ¦ÔØ Ú'¤ÄÎÁÎÎÑ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "ñË ÐÒÉÎÔÅÒ Ú'¤ÄÎÁÎÉÊ"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"äÌÑ ×¦ÄÄÁÌÅÎÏÇÏ ÓÅÒ×ÅÒÁ CUPS ÷ÁÍ ÎÅ ÐÏÔÒ¦ÂÎÏ ËÏÎƦ­ÕÒÕ×ÁÔÉ ÐÒÉÎÔÅÒ¦×,\n"
-"×Ó¦ ÐÒÉÎÔÅÒÉ ÂÕÄÕÔØ Á×ÔÏÍÁÔÉÞÎÏ ×ÉÚÎÁÞÅΦ. ñËÝÏ ÷É ÓÕÍΦ×Á¤ÔÅÓØ,\n"
-"×ÉÂÅÒ¦ÔØ \"÷¦ÄÄÁÌÅÎÉÊ ÓÅÒ×ÅÒ CUPS\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "î¦ÞÏÇÏ"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "÷ÉÂÅÒ¦ÔØ ÓÔÁÎÄÁÒÔÎÏÇÏ ËÏÒÉÓÔÕ×ÁÞÁ:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-"ñËÝÏ ÷É ËÏÒÉÓÔÕ¤ÔÅÓØ ×¦ÄÄÁÌÅÎÉÍ ÓÅÒ×ÅÒÏÍ CUPS, ÷ÁÍ ÎÅ ÐÏÔÒ¦ÂÎÏ\n"
-"ËÏÎƦ­ÕÒÕ×ÁÔÉ ÐÒÉÎÔÅÒ¦×. óÅÒ×ÅÒ CUPS ÐÏצÄÏÍÉÔØ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒÕ ÐÒÏ\n"
-"ÐÒÉÎÔÅÒÉ ÓÁÍÏÓÔ¦ÊÎÏ. ÷Ó¦ ÐÒÉÎÔÅÒÉ, Ñ˦ ÎÁ ÄÁÎÉÊ ÍÏÍÅÎÔ ×¦ÄÏͦ ÷ÁÛ¦Ê\n"
-"ÍÁÛÉΦ, ÐÅÒÅ̦ÞÅΦ × ÐÏ̦ \"óÔÁÎÄÁÒÔÎÉÊ ÐÒÉÎÔÅÒ\". ÷ÉÂÅÒ¦ÔØ, ÑËÉÊ\n"
-"ÐÒÉÎÔÅÒ ÂÕÄÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÷ÁÛÅÀ ÍÁÛÉÎÏÀ ÎÅÑ×ÎÏ ¦ ÎÁÔÉÓΦÔØ ËÎÏÐËÕ\n"
-"\"úÁÓÔÏÓÕ×ÁÔÉ/ðÅÒÅÞÉÔÁÔÉ ÐÒÉÎÔÅÒÉ\". ýÏ ÐÏÎÏ×ÉÔÉ ÓÐÉÓÏË ÐÒÉÎÔÅÒ¦×\n"
-"ÎÁÔÉÓΦÔØ ÃÀ Ö ËÎÏÐËÕ (×¦Ä ÍÏÍÅÎÔÕ ÓÔÁÒÔÕ ÓÅÒ×ÅÒÁ CUPS ÄÏ ÔÏÇÏ ÞÁÓÕ,\n"
-"ÐÏËÉ ×Ó¦ ÐÒÉÎÔÅÒÉ Ú'Ñ×ÌÑÔØÓÑ ÎÁ ÅËÒÁΦ ÍÏÖÅ ÐÒÏÊÔÉ ÄÏ 30 ÓÅËÕÎÄ). ñËÝÏ\n"
-"ÓÅÒ×ÅÒ CUPS, ÑËÉÊ ÏÂÓÌÕÇÏ×Õ¤ ÷ÁÛÕ ÍÁÛÉÎÕ, ÚÎÁÈÏÄÉÔØÓÑ × ¦ÎÛ¦Ê ÍÅÒÅÖ¦,\n"
-"÷É ÐÏ×ÉÎΦ ×ËÁÚÁÔÉ IP-ÁÄÒÅÓÕ ÓÅÒ×ÅÒÁ ¦ (ÍÏÖÌÉ×Ï) ÎÏÍÅÒ ÐÏÒÔÕ, ÝÏÂ\n"
-"ÏÔÒÉÍÁÔÉ ¦ÎÆÏÒÍÁæÀ ÐÒÏ ÐÒÉÎÔÅÒ Ú ÓÅÒ×ÅÒÁ. ¶ÎÁËÛÅ ÚÁÌÉÛÔŠæ ÐÏÌÑ\n"
-"ÐÏÒÏÖΦÍÉ."
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"ú×ÉÞÁÊÎÏ ÓÉÓÔÅÍÁ CUPS Á×ÔÏÍÁÔÉÞÎÏ ËÏÎƦ­ÕÒÕ¤ÔØÓÑ Õ ×¦ÄÐÏצÄÎÏÓÔ¦ Ú\n"
-"ËÏÎƦ­ÕÒÁæ¤À ÍÅÒÅÖ¦, ÔÁËÉÍ ÞÉÎÏÍ, ÝÏ ÍÏÖÎÁ ÚÒÁÚÕ Ö ÍÁÔÉ ÄÏÓÔÕÐ ÄÏ\n"
-"ÐÒÉÎÔÅÒ¦×, ÒÏÚÔÁÛÏ×ÁÎÉÈ × ÌÏËÁÌØÎ¦Ê ÍÅÒÅÖ¦. ñËÝÏ ÃÅ ÎÅ ÚÒÏÂÌÅÎÏ\n"
-"ËÏÒÅËÔÎÏ, ×ÉÍËΦÔØ ÏÐæÀ 'á×ÔÏÍÁÔÉÞÎÁ ËÏÎƦ­ÕÒÁÃ¦Ñ CUPS' ¦ ×ÒÕÞÎÕ\n"
-"צÄÒÅÄÁÇÕÊÔÅ ÆÁÊÌ /etc/cups/cupsd.conf. îÅ ÚÁÂÕÄØÔÅ ÐÅÒÅÚÁÐÕÓÔÉÔÉ CUPS\n"
-"ЦÓÌÑ ÃØÏÇÏ (ËÏÍÁÎÄÁ: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "úÁËÒÉÔÉ"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "úÁÓÔÏÓÕ×ÁÔÉ/ÐÅÒÅÞÉÔÁÔÉ ÐÒÉÎÔÅÒÉ"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ÁÄÒÅÓÁ ÍÁ¤ ÂÕÔÉ Õ ÆÏÒÍÁÔ¦ 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "îÏÍÅÒ ÐÏÒÔÁ ÍÁ¤ ÂÕÔÉ Ã¦ÌÉÍ ÞÉÓÌÏÍ!"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "óÔÁÎÄÁÒÔÎÉÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "IP ÁÄÒÅÓÁ CUPS ÓÅÒ×ÅÒÁ"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "ðÏÒÔ"
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr "á×ÔÏÍÁÔÉÞÎÁ ËÏÎƦ­ÕÒÁÃ¦Ñ CUPS"
-
-#: ../../printerdrake.pm_.c:217
-msgid "Detecting devices ..."
-msgstr "÷ÉÚÎÁÞÁÀ ÐÒÉÓÔÒϧ..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "ôÅÓÔÕÀ ÐÏÒÔÉ"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "íÏÄÅÌØ \\\"%s\\\" ÐÒÉÎÔÅÒÁ ÚÎÁÊÄÅÎÁ ÎÁ "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÓÔÒ¦Ê ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"äÏ ÑËÏÇÏ ÐÒÉÓÔÒÏÀ ЦÄ'¤ÄÎÁÎÉÊ ÷ÁÛ ÐÒÉÎÔÅÒ (צÄÚÎÁÞÔÅ,\n"
-"ÝÏ /dev/lp0 ÔÅÖ ÓÁÍÅ, ÝÏ ¦ LPT1:)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "ðÒÉÓÔÒ¦Ê ÐÒÉÎÔÅÒÁ: "
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "ðÒÉÓÔÒ¦Ê/ÆÁÊÌ ÎÅ ÚÎÁÊÄÅÎÏ"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-msgid "Reading printer database ..."
-msgstr "þÉÔÁÀ ÄÁΦ ÐÒÉÎÔÅÒ¦×  ..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "ïÐæ§ צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"ýÏ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ×¦ÄÄÁÌÅÎÉÊ lpd ÐÒÉÎÔÅÒ, ÷É ÍÁ¤ÔÅ ×ËÁÚÁÔÉ ÎÁÚ×Õ\n"
-"ÈÏÓÔÁ ÐÒÉÎÔ-ÓÅÒ×ÅÒÁ ÔÁ ÎÁÚ×Õ ÐÒÉÎÔÅÒÁ ÎÁ ÃØÏÍÕ ÈÏÓÔ¦."
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "îÁÚ×Á צÄÄÁÌÅÎÏÇÏ ÈÏÓÔÁ"
-
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "îÁÚ×Á צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "îÅÍÁ¤ ÎÁÚ×É ×¦ÄÄÁÌÅÎÏÇÏ ÈÏÓÔÁ!"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "÷¦ÄÓÕÔÎÑ ÎÁÚ×Á ÐÒÉÎÔÅÒÁ!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "ïÐæ§ SMB (Windows 9x/NT) ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"ýÏ ÄÒÕËÕ×ÁÔÉ ÎÁ SMB ÐÒÉÎÔÅÒ¦ ÷É ÍÁ¤ÔÅ ×ËÁÚÁÔÉ ÎÁÚ×Õ SMB ÈÏÓÔÁ\n"
-"(÷¦ÄͦÔØÔÅ: ÷ÏÎÁ ÍÏÖŠצÄÒ¦ÚÎÑÔÉÓÑ ×¦Ä ÊÏÇÏ TCP/IP ÎÁÚ×É!) ¦ ÍÏÖÌÉ×Ï\n"
-"ÔÁËÏÖ IP ÁÄÒÅÓÕ ÐÒÉÎÔ ÓÅÒ×ÅÒÁ ÒÁÚÏÍ Ú ¦ÍÅÎÅÍ ÓÅÒצÓÁ ÔÁ ÂÕÄØ-ÑËÉÍ\n"
-"¦ÍÅÎÅÍ ËÏÒÉÓÔÕ×ÁÞÁ ÒÁÚÏÍ Ú ÐÁÒÏÌÅÍ, ÔÁ ÒÏÂÏÞÏÀ ÇÒÕÐÏÀ."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "îÁÚ×Á ÈÏÓÔÁ SMB ÓÅÒ×ÅÒÁ"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "IP ÁÄÒÅÓÁ SMB ÓÅÒ×ÅÒÁ"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "îÁÚ×Á ÒÅÓÕÒÓÕ"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "òÏÂÏÞÁ ÇÒÕÐÁ"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "íÁÀÔØ ÂÕÔÉ ×ËÁÚÁÎÉÍÉ ÁÂÏ ÎÁÚ×Á ÓÅÒ×ÅÒÁ, ÁÂÏ ÊÏÇÏ IP ÁÄÒÅÓÁ!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "îÅÍÁ¤ ÎÁÚ×É ÒÅÓÕÒÓÕ samba!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "ïÐæ§ ÐÒÉÎÔÅÒÁ NetWare"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"äÌÑ ÔÏÇÏ, ÝÏ ÄÒÕËÕ×ÁÔÉ ÎÁ NetWare ÐÒÉÎÔ-ÓÅÒ×ÅÒ¦, ÷É ÐÏ×ÉÎΦ\n"
-"×ËÁÚÁÔÉ ÎÁÚ×Õ ÐÒÉÎÔ-ÓÅÒ×ÅÒÁ (úÁÕ×ÁÖÔÅ! ×ÏÎÁ ÍÏÖŠצÄÒ¦ÚÎÑÔÉÓÑ ×¦Ä\n"
-"TCP/IP ¦ÍÅΦ ÈÏÓÔÁ!) ÒÁÚÏÍ Ú ÎÁÚ×ÏÀ ÐÒÉÎÔÅÒÁ, ÑËÉÍ ÷É ÈÏÞÅÔÅ\n"
-"ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÔÁ צÄÐÏצÄÎÉÍ ¦ÍÅÎÅÍ ËÏÒÉÓÔÕ×ÁÞÁ Ú ÐÁÒÏÌÅÍ."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "ðÒÉÎÔÅÒ ÓÅÒ×ÅÒ"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "îÁÚ×Á ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "îÅÍÁ¤ ÎÁÚ×É ÓÅÒ×ÅÒÁ NCP!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "îÅÍÁ¤ ÎÁÚ×É ÞÅÒÇÉ NCP!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "ðÁÒÁÍÅÔÒÉ ÐÒÉÎÔÅÒÁ × ÍÅÒÅÖ¦"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"ýÏ ÄÒÕËÕ×ÁÔÉ ÎÁ ÐÒÉÎÔÅÒ¦ × ÍÅÒÅÖ¦, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÎÁÄÁÔÉ ÎÁÚ×Õ ÈÏÓÔÁ\n"
-"ÐÒÉÎÔÅÒÁ, ÔÁ ÍÏÖÌÉ×Ï ÎÏÍÅÒ ÐÏÒÔÁ. îÁ ÓÅÒ×ÅÒÁÈ HP JetDirect ÎÏÍÅÒ ÐÏÒÔÁ\n"
-"Õ Â¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× 9100, ÎÁ ¦ÎÛÉÈ ÍÏÖÅ\n"
-"צÄÒ¦ÚÎÑÔÉÓØ. ðÒÏËÏÎÓÕÌØÔÕÊÔÅÓØ Ú ¦ÎÓÔÒÕËæ¤À ÄÏ ÁÐÁÒÁÔÎÏÇÏ\n"
-"ÚÁÂÅÚÐÅÞÅÎÎÑ."
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "îÁÚ×Á ÈÏÓÔÁ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "îÅÍÁ¤ ÎÁÚ×É ÈÏÓÔÁ ÐÒÉÎÔÅÒÁ!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "URI ÐÒÉÓÔÒÏÀ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"íÏÖÎÁ ×ËÁÚÁÔÉ ÂÅÚÐÏÓÅÒÅÄÎØÏ URI ÄÌÑ ÄÏÓÔÕÐÕ ÄÏ ÐÒÉÎÔÅÒÁ. URI ÍÁ¤\n"
-"צÄÐÏצÄÁÔÉ ÓÐÅÃÉƦËÁæÑÍ ÁÂÏ CUPS ÁÂÏ Foomatic. úÁÕ×ÁÖÔÅ, ÏÄÎÁË, ÝÏ\n"
-"ÎÅ ×Ó¦ ÔÉÐÉ URI ЦÄÔÒÉÍÕÀÔØÓÑ ÚÁÓÏÂÁÍÉ ËÅÒÕ×ÁÎÎÑ ÞÅÒÇ ÄÒÕËÕ."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "ðÏÔÒ¦ÂÎÏ ××ÅÓÔÉ ËÏÒÅËÔÎÉÊ URI!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"ëÏÖÎÏÍÕ ÐÒÉÎÔÅÒÕ ÐÏ×ÉÎÎÁ צÄÐÏצÄÁÔÉ ÎÁÚ×Á (ÎÁÐÒÉËÌÁÄ lp).\n"
-"ðÏÌÑ ïÐÉÓ ÔÁ òÏÚÔÁÛÕ×ÁÎÎÑ ÚÁÐÏ×ÎÀ×ÁÔÉ ÎÅÏÂÏ×'ÑÚËÏ×Ï. ÷ÏÎÉ ¤\n"
-"ÌÉÛ ËÏÍÅÎÔÁÒÑÍÉ ÄÌÑ ËÏÒÉÓÔÕ×ÁÞ¦×."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "îÁÚ×Á ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "ïÐÉÓ"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "òÏÚÔÁÛÕ×ÁÎÎÑ"
-
-#: ../../printerdrake.pm_.c:701
-msgid "Preparing printer database ..."
-msgstr "çÏÔÕÀÔØÓÑ ÄÁΦ ÐÒÉÎÔÅÒ¦×  ..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "÷ÉÂ¦Ò ÍÏÄÅ̦ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "ñËÕ ÍÏÄÅÌØ ÐÒÉÎÔÅÒÁ ÷É ÍÁ¤ÔÅ"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "úͦÎÉÔÉ ËÏÎƦÇÕÒÁæÀ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"óÔÁÎÄÁÒÔΦ ÕÓÔÁÎÏ×ËÉ ÐÒÉÎÔÅÒÁ \n"
-"ðÅÒÅÓצÄÞ¦ÔØÓÑ, ÝÏ ÒÏÚÍ¦Ò ÓÔÏÒ¦ÎËÉ ÔÁ ÔÉÐ ÞÏÒÎÉÌ (ÑËÝÏ ÔÁËÁ ÕÓÔÁÎÏ×ËÁ\n"
-"ÐÒÉÓÕÔÎÑ) ×ÓÔÁÎÏ×ÌÅΦ צÒÎÏ. úÁÕ×ÁÖÔÅ, ÝÏ Ú Û×ÉÄ˦ÓÔØ ÄÒÕËÕ Ú\n"
-"ÎÁÄÚ×ÉÞÁÊÎÏ ×ÉÓÏËÏÀ Ñ˦ÓÔÀ ÍÏÖÅ ÂÕÔÉ ÚÎÁÞÎÏ ÐÏצÌØΦÛÁ."
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "ðÁÒÁÍÅÔÒ %s ÍÁ¤ ÂÕÔÉ Ã¦ÌÉÍ ÞÉÓÌÏÍ!"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "ðÁÒÁÍÅÔÒ %s ÍÁ¤ ÂÕÔÉ ÞÉÓÌÏÍ!"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "ðÁÒÁÍÅÔÒ %s ×ÉÈÏÄÉÔØ ÚÁ ÒÁÍËÉ ÄÏÚ×ÏÌÅÎÉÈ ÍÅÖ!"
-
-#: ../../printerdrake.pm_.c:1136
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"÷ÓÔÁÎÏ×ÉÔÉ ÐÒÉÎÔÅÒ \"%s\"\n"
-"ÑË ÓÔÁÎÄÁÒÔÎÉÊ?"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "ôÅÓÔÕÀ ÓÔÏÒ¦ÎËÉ"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"÷ÉÂÅÒ¦ÔØ, ÂÕÄØ ÌÁÓËÁ, ÓÔÏÒ¦ÎËÉ ÄÌÑ ÄÒÕËÕ\n"
-"úÁÕ×ÁÖÔÅ: ÄÒÕË ÆÏÔÏÇÒÁƦÞÎÉÈ ÔÅÓÔÏ×ÉÈ ÓÔÏÒ¦ÎÏË ÍÏÖÅ ÂÕÔÉ ÄÏ×ÇÉÍ ¦\n"
-"ÌÁÚÅÒΦ ÐÒÉÎÔÅÒÉ Ú ÎÅ×ÅÌÉËÉÍ ÏÂ'¤ÍÏÍ ÐÁÍ'ÑÔ¦ ÍÏÖÕÔØ ÎÁצÔØ ÚÏ×Ó¦Í ÎÅ\n"
-"ÎÁÄÒÕËÕ×ÁÔÉ ÔÁËÕ ÓÔÏÒ¦ÎËÕ. õ ¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦Ä ÄÏÓÔÁÔÎØÏ ÎÁÄÒÕËÕ×ÁÔÉ\n"
-"ÓÔÁÎÄÁÒÔÎÕ ÐÒÏÂÎÕ ÓÔÏÒ¦ÎËÕ."
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "îÅÍÁ¤ ÔÅÓÔÏ×ÉÈ ÓÔÏÒ¦ÎÏË"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "äÒÕË"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "óÔÁÎÄÁÒÔÎÁ ÔÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr "äÏÄÁÔËÏ×Á ÔÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ (Letter)"
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr "äÏÄÁÔËÏ×Á ÔÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ (A4)"
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "ôÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ ÆÏÔÏÇÒÁƦÞÎϧ ÑËÏÓÔ¦"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "äÒÕËÕÀ ÔÅÓÔÏ×Õ ÓÔÏÒ¦ÎËÕ(ÓÔÏÒ¦ÎËÉ)..."
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"ôÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ ÐÅÒÅÄÁÎÁ ÐÒÏÇÒÁͦ ÄÒÕËÕ.\n"
-"ðÅÒÅÄ ÔÉÍ, ÑË ÐÒÉÎÔÅÒ ÐÏÞÎÅ ÄÒÕËÕ×ÁÔÉ, ÍÏÖÌÉ×Ï ÐÒÏÊÄÅ \n"
-"ÄÅÑËÉÊ ÞÁÓ.\n"
-"óÔÁÔÕÓ ÄÒÕËÕ:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"ôÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ ÐÅÒÅÄÁÎÁ ÐÒÏÇÒÁͦ ÄÒÕËÕ.\n"
-"ðÅÒÅÄ ÔÉÍ, ÑË ÐÒÉÎÔÅÒ ÐÏÞÎÅ ÄÒÕËÕ×ÁÔÉ, ÍÏÖÌÉ×Ï ÐÒÏÊÄÅ\n"
-"ÄÅÑËÉÊ ÞÁÓ. þÉ ×¦Î ÐÒÁÃÀ¤ ËÏÒÅËÔÎÏ?\n"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "óÐÒÁÃÀ×ÁÌÏ ÎÏÒÍÁÌØÎÏ?"
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "îÅÍÁ¤ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "÷ÉÍÉËÁÀ ÍÅÒÅÖÕ"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "ïÐæ§ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "þÉÔÁÀ ÄÁΦ ÐÒÉÎÔÅÒ¦×  ..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "ðÅÒÅÎ¦Ó ËÏÎƦÇÕÒÁæ§ ÐÒÉÎÔÅÒ¦× "
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-"ëÏÎƦ­ÕÒÁæÀ, ÝÏ ÂÕÌÁ ЦÄÇÏÔÏ×ÁÎÁ ÄÌÑ ÞÅÒÇÉ %s ÷É ÍÏÖÅÔÅ ÓËÏЦÀ×ÁÔÉ\n"
-"äÌÑ ÄÁÎϧ ÕÓÔÁÎÏ×ËÉ ÞÅÒÇÉ ÄÒÕËÕ (%s). ÷Ó¦ ÕÓÔÁÎÏ×ÏÞΦ ÄÁΦ (ÎÁÚ×Á\n"
-"ÐÒÉÎÔÅÒÁ, ÏÐÉÓ, ÒÏÚÔÁÛÕ×ÁÎÎÑ, ÔÉÐ Ú'¤ÄÎÁÎÎÑ ¦ ÓÔÁÎÄÁÒÔΦ ÕÓÔÁÎÏ×ËÉ)\n"
-"ÂÕÄÕÔØ ÐÅÒÅÎÅÓÅΦ ÎÁ ÎÏ×Õ ËÏÎƦ­ÕÒÁæÀ. áÌÅ ÒÏÂÏÔÉ Ú ÞÅÒÇÉ ÐÅÒÅÎÅÓÅÎÏ\n"
-"ÎÅ ÂÕÄÅ. îÅ ×Ó¦ ÞÅÒÇÉ ÍÏÖÕÔØ ÂÕÔÉ ÐÅÒÅÎÅÓÅÎÉÍÉ Ú ÔÁËÉÈ ÐÒÉÞÉÎ: \n"
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-"CUPS ΊЦÄÔÒÉÍÕ¤ ÄÒÕË ÎÁ ÐÒÉÎÔÅÒÁÈ ÓÅÒ×ÅÒ¦× Novell ÞÉ ÐÒÉÎÔÅÒ¦×, ÝÏ\n"
-"ÐÅÒÅÄÁÀÔØ ÄÁΦ ÎÁ ÄÒÕË Õ ×ÉÇÌÑĦ ËÏÍÁÎÄ Ú ÄÏצÌØÎÉÍ ÓÉÎÔÁËÓÉÓÏÍ.\n"
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-"PDQ ЦÄÔÒÉÍÕ¤ Ô¦ÌØËÉ ÌÏËÁÌØΦ ÐÒÉÎÔÅÒÉ, צÄÄÁÌÅΦ ÐÒÉÎÔÅÒÉ LDP ¦\n"
-"ÐÒÉÎÔÅÒÉ, ÝÏ ÐÒÁÃÀÀÔØ ÞÅÒÅÚ Socket/TCP.\n"
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ÔÁ LPRng ΊЦÄÔÒÉÍÕÀÔØ ÐÒÉÎÔÅÒÉ IPP.\n"
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-"äÏÄÁÔËÏ×Ï, ÞÅÒÇÉ ÎÅ ÐÅÒÅÎÏÓÑÔØÓÑ Ã¦¤À ËÏÍÁÎÄÏÀ ¦ ËÏÎƦ­ÕÒÁæÑ\n"
-"\"foomatic-configure\" ÎÅ ÍÏÖÅ ÂÕÔÉ ÐÅÒÅÎÅÓÅÎÁ ÔÁËÏÖ."
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-"\n"
-"ëÒ¦Í ÔÏÇÏ, ÐÒÉÎÔÅÒÉ ÓËÏÎƦ­ÕÒÏ×ÁΦ ÚÁ ÄÏÐÏÍÏÇÏÀ ÎÁÄÁÎÉÈ ×ÉÒÏÂÎÉËÁÍÉ\n"
-"ÆÁÊÌ¦× PPD ÞÉ ÐÒÉÎÔÅÒÉ, ÝÏ ÍÁÀÔØ Ò¦ÄΦ ÄÒÁÊ×ÅÒÉ CUPS ÎÅ ÍÏÖÕÔØ ÂÕÔÉ\n"
-"ÐÅÒÅÎÅÓÅÎÉÍÉ."
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"ðÏÚÎÁÞÔÅ ÐÒÉÎÔÅÒÉ ÄÌÑ ÐÅÒÅÎÏÓÕ ¦ ÎÁÔÉÓΦÔØ ÎÁ \"ðÅÒÅÎÅÓÔÉ\"."
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "îÅ ÐÅÒÅÎÏÓÉÔÉ ÐÒÉÎÔÅÒÉ"
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "ðÅÒÅÎÅÓÔÉ"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"ðÒÉÎÔÅÒ Ú ÎÁÚ×ÏÀ \"%s\" ×ÖÅ ¦ÓÎÕ¤ × \"%s\". îÁÔÉÓΦÔØ \"ðÅÒÅÎÅÓÔÉ\" ÝÏÂ\n"
-"ÐÅÒÅÐÉÓÁÔÉ ÊÏÇÏ ×ÉÚÎÁÞÅÎÎÑ. ÷É ÍÏÖÅÔÅ ÔÁËÏÖ ÎÁÄÒÕËÕ×ÁÔÉ ÎÏ×Õ ÎÁÚ×Õ ÞÉ\n"
-"ÐÒÏÐÕÓÔÉÔÉ ÃÅÊ ÐÒÉÎÔÅÒ."
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"îÁÚ×Á ÐÒÉÎÔÅÒÁ ÍÁ¤ ÓËÌÁÄÁÔÉÓÑ Ô¦ÌØËÉ Ú Ì¦ÔÅÒ, ÃÉÆÒ ÔÁ ÓÉÍ×ÏÌÁ ЦÄËÒÅÓÌÅÎÎÑ."
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"ðÒÉÎÔÅÒ Ú ÎÁÚ×ÏÀ \"%s\" ×ÖÅ ¦ÓÎÕ¤.\n"
-"÷É Ä¦ÊÓÎÏ ÂÁÖÁ¤ÔÅ ÐÅÒÅÐÉÓÁÔÉ ÊÏÇÏ ËÏÎƦ­ÕÒÁæÀ?"
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "îÏ×Á ÎÁÚ×Á ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "ðÅÒÅÎÏÛÕ %s ..."
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-"÷É ÐÅÒÅÎÅÓÌÉ ÷ÁÛ ËÏÌÉÛÎ¦Ê ÏÓÎÏ×ÎÉÊ ÐÒÉÎÔÅÒ (\"%s\"). úÒÏÂÉÔÉ ÔÁË, ÝÏÂ\n"
-"ÃÅÊ ÐÒÉÎÔÅÒ ÚÁÌÉÛÁ×ÓÑ ÏÓÎÏ×ÎÉÍ ¦ × ÎÏ×¦Ê ÓÉÓÔÅͦ ÄÒÕËÕ %s?"
-
-#: ../../printerdrake.pm_.c:1423
-msgid "Refreshing printer data ..."
-msgstr "ðÏÎÏ×ÌÀÀ ÄÁΦ ÐÒÉÎÔÅÒ¦×  ..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "îÁÓÔÒϧÔÉ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "ðÏÞÉÎÁÀ Ú'¤ÄÎÁÎÎÑ..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "îÁÓÔÒϧÔÉ ÍÅÒÅÖÕ"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "íÏΦÔÏÒ ÎÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÉÊ"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "ëÏÎƦÇÕÒÕÀ ÍÅÒÅÖÕ"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "ñËÕ ÓÉÓÔÅÍÕ ÄÒÕËÕ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ?"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "÷ÉÓÏËÉÊ"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "ðÁÒÁÎϦÄÁÌØÎÉÊ"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "ñËÕ ÓÉÓÔÅÍÕ ÄÒÕËÕ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "ðÅÒÅצÒËÁ ×ÓÔÁÎÏ×ÌÅÎÏÇÏ ÐÒÏÇÒÁÍÎÏÇÏ ÚÁÂÅÚÐÅÞÅÎÎÑ..."
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "óÔÉÒÁÀ LPRng..."
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "÷ÉÄÁÌÅÎÎÑ LPD..."
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "÷ÉÂÅÒ¦ÔØ ÞÅÒÇÕ ÄÒÕËÕ ÄÌÑ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "ñËÕ ÞÅÒÇÕ ÄÒÕËÕ (ÓÉÓÔÅÍÕ) ÷É ÈÏÞÅÔÅ ×ÖÉ×ÁÔÉ?"
-
-#: ../../printerdrake.pm_.c:1759
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "îÁÓÔÒÏÀÀ ÐÒÉÎÔÅÒ \"%s\"..."
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "ïÐæ§ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr "çÏÔÕÀ PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "þÉ ÔÒÅÂÁ ÷ÁÍ ÎÁÓÔÒϧÔÉ ÄÒÕË?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr "óÉÓÔÅÍÁ ÄÒÕËÕ: "
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "ú×ÉÞÁÊÎÉÊ ÒÅÖÉÍ"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (ïÓÎÏ×ÎÁ)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "ðÒÉÎÔÅÒ(É) ÎÁ צÄÄÁÌÅÎÏÍÕ ÓÅÒ×ÅÒ¦(ÁÈ) CUPS"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-msgid "Printer(s) on remote server(s)"
-msgstr "ðÒÉÎÔÅÒ(É) ÎÁ צÄÄÁÌÅÎÏÍÕ ÓÅÒ×ÅÒ¦(ÁÈ) CUPS"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "äÏÄÁÔÉ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "þÉ ×É ÈÏÞÅÔÅ ×ÉÐÒÏÂÕ×ÁÔÉ ÎÏ×Õ ËÏÎƦ­ÕÒÁæÀ?"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "úͦÎÉÔÉ ËÏÎƦÇÕÒÁæÀ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"ðÒÉÎÔÅÒ %s: %s %s\n"
-"ýÏ ÐÏÔÒ¦ÂÎÏ ÚͦÎÉÔÉ ÄÌÑ ÃØÏÇÏ ÐÒÉÎÔÅÒÁ?"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "÷ÉËÏÎÁÔÉ!"
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "ôÉÐ  Ú'¤ÄÎÁÎÎÑ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "îÁÚ×Á, ÏÐÉÓ, ÒÏÚÔÁÛÕ×ÁÎÎÑ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "÷ÉÒÏÂÎÉË ÐÒÉÎÔÅÒÁ, ÍÏÄÅÌØ, ÄÒÁÊ×ÅÒ"
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "÷ÉÒÏÂÎÉË ÐÒÉÎÔÅÒÁ, ÍÏÄÅÌØ"
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÑË ÏÓÎÏ×ÎÉÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "äÒÕË ÔÅÓÔÏ×ÉÈ ÓÔÏÒ¦ÎÏË"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:2071
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "óÔÉÒÁÀ ÄÁΦ ÓÔÁÒÏÇÏ ÐÒÉÎÔÅÒÁ \"%s\"  ..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "ðÒÉÎÔÅÒ \"%s\" ×ÓÔÁÎÏ×ÌÅÎÏ ÏÓÎÏ×ÎÉÍ"
-
-#: ../../printerdrake.pm_.c:2103
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "þÉ ÷É ÈÏÞÅÔÅ ×ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2105
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "óÔÉÒÁÀ ÐÒÉÎÔÅÒ \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÐÒÏËÓ¦"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ ÄÏ ËÏÎƦ­ÕÒÁæÊÎϧ ÐÒÏÇÒÁÍÉ ÄÌÑ ÐÒÏËÓ¦.\n"
-"\n"
-"ôÕÔ ÷É ÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÐÒÏËÓ¦ ÄÌÑ ÐÒÏÔÏËÏÌ¦× ftp ÔÁ http Ú ÐÁÒÏÌÅÍ\n"
-"ÞÉ ÂÅÚ.  \n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"úÁÐÏ×ΦÔØ ÇÒÁÆÉ ¦ÎÆÏÒÍÁæ§ ÐÒÏ ÐÒÏËÓ¦ http\n"
-"úÁÌÉÛ¦ÔØ §È ÐÏÒÏÖΦÍÉ, ÑËÝÏ ÷É ÎÅ ÍÁ¤ÔÅ ÐÒÏËÓ¦ http"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "ÐÏÒÔ"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "÷ÉÇÌÑÄ URL ÍÁ¤ ÂÕÔÉ http:"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "îÏÍÅÒ ÐÏÒÔÁ ÍÁ¤ ÂÕÔÉ ÞÉÓÌÏ×ÉÍ"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"úÁÐÏ×ΦÔØ ÇÒÁÆÉ ¦ÎÆÏÒÍÁæ§ ÐÒÏ ÐÒÏËÓ¦ ftp\n"
-"úÁÌÉÛ¦ÔØ §È ÐÏÒÏÖΦÍÉ, ÑËÝÏ ÷É ÎÅ ÍÁ¤ÔÅ ÐÒÏËÓ¦ ftp"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "÷ÉÇÌÑÄ URL ÍÁ¤ ÂÕÔÉ 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"âÕÄØ ÌÁÓËÁ, ÚÁÐÏ×ΦÔØ ¦Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ ÔÁ ÐÁÒÏÌØ, ÑËÝÏ ×ÏÎÉ ¤.\n"
-"ñËÝÏ Î¦ - ÚÁÌÉÛÔÅ §È ÐÏÒÏÖΦÍÉ"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "ÒŤÓÔÒÁæÑ"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "ÐÁÒÏÌØ"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "ÝÅ ÒÁÚ ÐÁÒÏÌØ"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "ðÁÒÏ̦ Ò¦ÚΦ. óÐÒÏÂÕÊÔÅ ÝÅ ÒÁÚ."
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "îÅ ÍÏÖÕ ÄÏÄÁÔÉ Ð¦ÄÒÏÚÄ¦Ì ÄÏ _ÆÏÒÍÁÔÏ×ÁÎÏÇÏ_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "îÅ ÍÏÖÕ ÚÁÐÉÓÁÔÉ ÆÁÊÌ %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "ÚÂ¦Ê Õ mkraid"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "ÚÂ¦Ê Õ mkraid (ÍÏÖÌÉ×Ï ÎÅ ×ÓÔÁÎÏ×ÌÅΦ raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "îÅÄÏÓÔÁÔÎØÏ Ð¦ÄÒÏÚÄ¦Ì¦× ÄÌÑ RAID Ò¦×ÎÑ %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "úÁÐÕÓË Ú×ÕËÏ×ϧ ÓÉÓÔÅÍÉ ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron ÓÌÕÖÉÔØ ÄÌÑ ÐÅÒ¦ÏÄÉÞÎÏÇÏ ×ÉËÏÎÁÎÎÑ ËÏÍÁÎÄ."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd ÓÌÕÖÉÔØ ÄÌÑ ËÏÎÔÒÏÌÀ ÚÁ Ò¦×ÎÅÍ ÂÁÔÁÒŧ ÔÁ ÚÁÐÉÓÕ ÐÏצÄÏÍÌÅÎØ ÐÒÏ\n"
-"ÃÅ Õ ÓÉÓÔÍÎÉÊ ÖÕÒÎÁÌ syslog. ëÒ¦Í ÃØÏÇÏ ×¦Î ÍÏÖÅ ×ÉÍÉËÁÔÉ ËÏÍÐ'ÀÔÅÒ,\n"
-"ËÏÌÉ ÂÁÔÁÒÅÑ ÒÏÚÒÑÄÉÌÁÓÑ."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"÷ÉËÏÎÕ¤ ËÏÍÁÎÄÉ, ÚÁÐÌÁÎÏ×ÁΦ ËÏÍÁÎÄÏÀ at Ð¦Ä ÞÁÓ ×ÉËÏÎÁÎÎÑ ËÏÍÁÎÄÉ at\n"
-"¦ ×ÉËÏÎÕ¤ ÐÁËÅÔΦ ËÏÍÁÎÄÉ, ËÏÌÉ ÓÉÓÔÅÍÎÅ ÎÁ×ÁÎÔÁÖÅÎÎÑ ÄÏÓÔÁÔÎØÏ\n"
-"ÎÉÚØËÅ. "
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron - ÃÅ ÓÔÁÎÄÁÒÔÎÁ ÐÒÏÇÒÁÍÁ UNIX, ÑËÁ ×ÉËÏÎÕ¤ ×ÉÂÒÁΦ ËÏÒÉÓÔÕ×ÁÞÅÍ\n"
-"ÐÒÏÇÒÁÍÉ ÐÅÒ¦ÏÄÉÞÎÏ Õ ×ÉÂÒÁÎÉÊ ÞÁÓ. vixie cron ÄÏÄÁ¤ ÄÏ ÓÔÁÎÄÁÒÔÎÏÇÏ\n"
-"UNIX cron ˦ÌØËÁ ÎÏ×ÉÈ ÍÏÖÌÉ×ÏÓÔÅÊ, ×ËÌÀÞÁÀÞÉ Ð¦Ä×ÉÝÅÎÕ ÂÅÚÐÅËÕ ÔÁ\n"
-"¦ÌØÛ ÐÏÔÕÖΦ ËÏÎƦÇÕÒÁæÊΦ ÏÐæ§."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ÄÏÄÁ¤ ЦÄÔÒÉÍËÕ ÍÉÛËÉ ÄÏ ÔÅËÓÔÏ×ÉÈ ÐÒÏÇÒÁÍ Õ ì¦ÎÁËÓ¦, ÔÁËÉÈ ÑË,\n"
-"ÎÁÐÒÉËÌÁÄ, Midnight Commander. äÏÄÁ¤ ÔÁËÏÖ ÍÏÖÌÉ×ÏÓÔ¦ \"cut-and-paste\"\n"
-"ÄÏ ÐÒÏÇÒÁÍ, ÝÏ ÐÒÁÃÀÀÔØ ÎÁ ËÏÎÓÏ̦, ×ËÌÀÞÁÀÞÉ Ð¦ÄÔÒÉÍËÕ ÍÅÎÀ ÎÁ\n"
-"ËÏÎÓÏ̦."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake ×ÉËÏÎÕ¤ ÔÅÓÔÕ×ÁÎÎÑ ÁÐÁÒÁÔÎÏÇÏ ÚÁÂÅÚÐÅÞÅÎÎÑ ¦ ÑËÝÏ ÐÏÔÒ¦ÂÎÏ\n"
-"ËÏÎƦ­ÕÒÕ¤ ÎÏ×Å ÁÂÏ ÚͦÎÅÎÅ ÁÐÁÒÁÔÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache - ÃÅ ÓÅÒ×ÅÒ  ÄÌÑ World Wide Web. ÷¦Î ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÄÌÑ ÎÁÄÁÎÎÑ "
-"ÓÅÒצӦ×\n"
-"ÄÌÑ ÆÁÊÌ¦× HTML ÔÁ CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"óÕÐÅÒÓÅÒ×ÅÒ ÄÅÍÏÎ (¦ÌØÛ ×¦ÄÏÍÉÊ Ð¦Ä ÎÁÚ×ÏÀ inetd) ÓÌÕÖÉÔØ ÄÌÑ ÚÁÐÕÓËÕ\n"
-"Ò¦ÚÎÏÍÁΦÔÎÉÈ ÓÅÒ×¦Ó¦× ¶ÎÔÅÒÎÅÔÕ, ËÏÌÉ ÃÅ ÎÅÏÂȦÄÎÏ. ÷¦Î\n"
-"צÄÐÏצÄÁÌØÎÉÊ ÚÁ ÓÔÁÒÔ ÂÁÇÁÔØÏÈ ÓÅÒצӦ×, ÔÁËÉÈ ÑË telnet, ftp, rsh,\n"
-"ÔÁ rlogin. ðÒÉ ÎÅÐÒÁÃÀÀÞÏÍÕ ÓÅÒ×ÅÒ¦ inetd ÎÅ ÂÕÄÕÔØ ÔÁËÏÖ ÐÒÁÃÀ×ÁÔÉ\n"
-"×Ó¦ ¦ÎÛ¦ ÓÅÒצÓÉ."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"úÁÐÕÓËÁ¤ ÍÅÈÁΦÚÍ Æ¦ÌØÔÒÕ×ÁÎÎÑ ÐÁËÅÔ¦× ÄÌÑ ÑÄÒÁ 2.2 ì¦ÎÁËÓÁ, ÄÌÑ ÔÏÇÏ\n"
-"ÝÏ ÍÁÔÉ ÚÁÈÉÓÔ ÔÉÐÕ firewall ÎÁ ×ÁÛ¦Ê ÓÉÓÔÅͦ."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"ãÅÊ ÐÁËÅÔ ÚÁ×ÁÎÔÁÖÕ¤ ×ÉÂÒÁÎÕ ÒÏÚËÌÁÄËÕ ËÌÁצÁÔÕÒÉ, ÑËÁ ×ÓÔÁÎÏ×ÌÀ¤ÔØÓÑ\n"
-"× /etc/sysconfig/keyboard. ãÑ ËÌÁצÁÔÕÒÁ ÍÏÖÅ ÂÕÔÉ ×ÉÂÒÁÎÁ ÚÁ\n"
-"ÄÏÐÏÍÏÇÏÀ ÐÒÏÇÒÁÍÉ kbdconfig. ëÒÁÝÅ ÚÁÌÉÛÉÔÉ ÃÅÊ ÐÁËÅÔ ÐÒÁÃÀÀÞÉÍ ÎÁ\n"
-"¦ÌØÛÏÓÔ¦ ÓÉÓÔÅÍ."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"á×ÔÏÍÁÔÉÞÎÅ ÓÔ×ÏÒÅÎÎÑ ÆÁÊÌ¦× ÚÁÇÏÌÏ×Ë¦× ÄÌÑ ÑÄÒÁ × ËÁÔÁÌÏÚ¦ /boot ÄÌÑ\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"á×ÔÏÍÁÔÉÞÎÅ ×ÉÚÎÁÞÅÎÎÑ ÔÁ ËÏÎƦ­ÕÒÕ×ÁÎÎÑ ÁÐÁÒÁÔÎÏÇÏ ÚÁÂÅÚÐÅÞÅÎÎÑ ÐÒÉ\n"
-"ÚÁ×ÁÎÔÁÖÅÎΦ."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf Õ ÄÅÑËÉÈ ×ÉÐÁÄËÁÈ ÂÕÄÅ ×ÉËÏÎÕ×ÁÔÉ ÐÅ×Φ ÐÒÏÃÅÄÕÒÉ Ð¦Ä ÞÁÓ\n"
-"ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ ÝÏ ÚÁÂÅÚÐÅÞÉÔÉ Ð¦ÄÔÒÉÍÁÎÎÑ Ã¦Ì¦ÓÎÏÓÔ¦\n"
-"ËÏÎƦ­ÕÒÁæ§ ÓÉÓÔÅÍÉ."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd - ÃÅ ÄÅÍÏÎ ÄÒÕËÕ, ÑËÉÊ ÚÁÂÅÚÐÅÞÕ¤ ÒÏÂÏÔÕ lpr. æÁËÔÉÞÎÏ ×¦Î ¤\n"
-"ÓÅÒ×ÅÒÏÍ, ÑËÉÊ ÎÁÄÓÉÌÁ¤ ÒÏÂÏÔÕ ÄÌÑ ÄÒÕËÕ×ÁÎÎÑ ÎÁ ÐÒÉÎÔÅÒ¦."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÄÌÑ ÐÏÂÕÄÏ×É ×ÉÓÏËÏÎÁĦÊÎÏÇÏ\n"
-"ÓÅÒ×ÅÒÁ Ú ×ÉÓÏËÏÀ ÐÒÏÄÕËÔÉ×ΦÓÔÀ."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) - ÃÅ óÅÒ×ÅÒ îÁÚ× äÏÍÅÎ¦× (Domain Name Server, DNS), ÑËÉÊ\n"
-"ÓÌÕÖÉÔØ ÄÌÑ ×ÉÚÎÁÞÅÎÎÑ ÎÁÚ× ÈÏÓÔ¦× ÚÁ IP ÁÄÒÅÓÁÍÉ ÔÁ ÎÁ×ÐÁËÉ."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"íÏÎÔÕ¤ ÔÁ ÒÏÚÍÏÎÔÏ×Õ¤ ×Ó¦ ÆÁÊÌÏצ ÓÉÓÔÅÍÉ ÔÉÐÕ Network File System\n"
-"(NFS), SMB (Lan Manager/Windows) ÔÁ NCP (NetWare)."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"áËÔÉצÚÕ¤ ÔÁ ÄÅÁËÔÉצÚÕ¤ ×Ó¦ ¦ÎÔÅÒÆÅÊÓÉ ÍÅÒÅÖ¦, Ñ˦ ÎÁÓÔÒϤΦ\n"
-"ÓÔÁÒÔÕ×ÁÔÉ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS - ÃÅ ÄÕÖÅ ÐÏÐÕÌÑÒÎÉÊ ÐÒÏÔÏËÏÌ ÄÌÑ ÓЦÌØÎÏÇÏ ×ÉËÏÒÉÓÔÁÎÎÑ ÆÁÊÌ¦× ÎÁ\n"
-"ËÏÍÐ'ÀÔÅÒÁÈ, Ú'¤ÄÎÁÎÉÈ ÍÅÒÅÖÅÀ TCP/IP. ãÅÊ ÓÅÒ×¦Ó ÚÁÂÅÚÐÅÞÕ¤ NFS\n"
-"ÓÅÒ×ÅÒ, ÑËÉÊ ËÏÎƦ­ÕÒÕ¤ÔØÓÑ ÚÁ ÄÏÐÏÍÏÇÏÀ ÆÁÊÌÁ /etc/exports."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS - ÃÅ ÄÕÖÅ ÐÏÐÕÌÑÒÎÉÊ ÐÒÏÔÏËÏÌ ÄÌÑ ÓЦÌØÎÏÇÏ ×ÉËÏÒÉÓÔÁÎÎÑ ÆÁÊÌ¦× ÎÁ\n"
-"ËÏÍÐ'ÀÔÅÒÁÈ, Ú'¤ÄÎÁÎÉÈ ÍÅÒÅÖÅÀ TCP/IP. ãÅÊ ÓÅÒ×¦Ó ÚÁÂÅÚÐÅÞÕ¤\n"
-"ÍÏÖÌÉצÓÔØ ËÏÒÉÓÔÕ×ÁÎÎÑ ÚÁÍÉËÁÎÎÑÍ ÆÁÊ̦×."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"á×ÔÏÍÁÔÉÞÎÏ ×ËÌÀÞÉÔÉ NumLock ÎÁ ËÏÎÓÏ̦ ¦ × XFree \n"
-"ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "ð¦ÄÔÒÉÍËÁ ÄÌÑ OKI 4w ¦ ÐÏĦÂÎÉÈ win ÐÒÉÎÔÅÒ¦×."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA ЦÄÔÒÉÍËÁ ÐÏÔÒ¦ÂÎÁ × ÏÓÎÏ×ÎÏÍÕ ÄÌÑ ÚÁÂÅÚÐÅÞÅÎÎÑ ÒÏÂÏÔÉ ÔÁËÉÈ\n"
-"ÒÅÞÅÊ, ÑË ethernet ÔÁ ÍÏÄÅÍ × ÐÅÒÅÎÏÓÎÉÈ ËÏÍÐ'ÀÔÅÒÁÈ. ðÁËÅÔ ÎÅ ÐÏÞÎÅ\n"
-"ÐÒÁÃÀ×ÁÔÉ, ÑËÝÏ ÊÏÇÏ ÎÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ. ïÔÖÅ, ÊÏÇÏ ÂÅÚÐÅÞÎÏ\n"
-"×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÎÁ ËÏÍÐ'ÀÔÅÒÁÈ, ÎÁצÔØ ÑËÝÏ ×¦Î ÎÅ ÂÕÄÅ\n"
-"×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper ËÅÒÕ¤ Ú'¤ÄÎÁÎÎÑÍÉ Ú ÐÒÏÔÏËÏÌÏÍ RPC, Ñ˦ ×ÉËÏÒÉÓÔÏ×ÕÀÔØÓÑ\n"
-"ÔÁËÉÍÉ ÐÒÏÔÏËÏÌÁÍÉ, ÑË NFS ÔÁ NIS. portmaper ÐÏ×ÉÎÅÎ ÐÒÁÃÀ×ÁÔÉ ÎÁ\n"
-"ÍÁÛÉÎÁÈ, Ñ˦ ¤ ÓÅÒ×ÅÒÁÍÉ ÄÌÑ ÐÒÏÔÏËÏ̦×, ÝÏ ËÏÒÉÓÔÕÀÔØÓÑ RPC."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix - ÃÅ ÐÒÏÇÒÁÍÁ ÄÌÑ ÐÅÒÅÄÁÞ¦ ÅÌÅËÔÒÏÎÎϧ ÐÏÛÔÉ (Mail Transport\n"
-"Agent), ÑËÁ ÐÅÒÅÄÁ¤ ÐÏÛÔÏצ ÐÏצÄÏÍÌÅÎÎÑ ×¦Ä ÏÄÎÏÇÏ ËÏÍÐ'ÀÔÅÒÁ ÄÏ\n"
-"¦ÎÛÏÇÏ."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"úÂÅÒ¦ÇÁ¤ ¦ צÄÎÏ×ÌÀ¤ ÄÖÅÒÅÌÏ ÅÎÔÒÏЦ§ × ÓÉÓÔÅͦ, ÔÉÍ ÓÁÍÉÍ Ð¦Ä×ÉÝÕÀÞÉ\n"
-"Ñ˦ÓÔØ ­ÅÎÅÒÁæ§ ×ÉÐÁÄËÏ×ÉÈ ÞÉÓÅÌ."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"ðÏÓÔÁ×ÉÔÉ \"ÓÉÒ¦\" ÆÁÊÌÉ ÓÐÅæÁÌØÎÉÈ ÐÒÉÓÔÒÏ§× Õ ×¦ÄÐÏצÄΦÓÔØ ÄÏ\n"
-"ÂÌÏÞÎÉÈ ÐÒÉÓÔÒÏ§× (ÑË, ÎÁÐÒÉËÌÁÄ, ЦÄÒÏÚĦÌÉ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ) ÄÌÑ\n"
-"×ÉËÏÒÉÓÔÁÎÎÑ × ÐÒÏÇÒÁÍÁÈ ÐÏĦÂÎÉÈ ÄÏ Oracle."
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"äÅÍÏÎ routed ÄÁ¤ ÍÏÖÌÉצÓÔØ ËÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏÍÁÔÉÞÎÉÍ ÐÏÎÏ×ÌÅÎÎÑÍ\n"
-"ÔÁÂÌÉæ ÍÁÒÛÒÕÔÉÚÁæ§ IP ÚÁ ÄÏÐÏÍÏÇÏÀ ÐÒÏÔÏËÏÌÁ RIP. ðÒÏÔÏËÏÌ RIP\n"
-"ÛÉÒÏËÏ ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÎÁ ÎÅ×ÅÌÉËÉÈ ÍÅÒÅÖÁÈ, × ÔÏÊ ÞÁÓ, ÑË ÎÁ ¦ÌØÛ\n"
-"ÓËÌÁÄÎÉÈ ÎÅÏÂȦÄÎÅ ÚÁÓÔÏÓÕ×ÁÎÎÑ Â¦ÌØÛ ÒÏÚ×ÉÎÅÎÉÈ ÐÒÏÔÏËÏ̦×\n"
-"ÍÁÒÛÒÕÔÉÚÁæ§."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"ðÒÏÔÏËÏÌ rstat ÄÁ¤ ÍÏÖÌÉצÓÔØ ËÏÒÉÓÔÕ×ÁÞÁÍ × ÍÅÒÅÖ¦ ÏÔÒÉÍÕ×ÁÔÉ ÄÁΦ\n"
-"ÐÒÏ ÚÁ×ÁÎÔÁÎÎÑ ÂÕÄØ-ÑËÏÇÏ ËÏÍÐ'ÀÔÅÒÁ × Ã¦Ê ÍÅÒÅÖ¦."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"ðÒÏÔÏËÏÌ rusers ÄÁ¤ ÍÏÖÌÉצÓÔØ ËÏÒÉÓÔÕ×ÁÞÁÍ × ÍÅÒÅÖ¦ ÏÔÒÉÍÕ×ÁÔÉ\n"
-"¦ÎÆÏÒÍÁæÀ ÐÒÏ ÔÅ, ÈÔÏ Ú ËÏÒÉÓÔÕ×ÁÞ¦× ÚÁÒŤÓÔÒÏ×ÁÎÉÊ ÎÁ ÓÉÓÔÅÍÁÈ, ÝÏ\n"
-"צÄÐÏצÄÁÀÔØ ÎÁ ÚÁÐÉÔÉ."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"ðÒÏÔÏËÏÌ rwho ×ÉÄÁ¤ ËÏÒÉÓÔÕ×ÁÞÁÍ ÎÁ צÄÄÁÌÅÎÉÈ ÓÉÓÔÅÍÁÈ ¦ÎÆÏÒÍÁæÀ ÐÒÏ\n"
-"×Ó¦È ËÏÒÉÓÔÕ×ÁÞ¦× ÚÁÒŤÓÔÒÏ×ÁÎÉÈ × ÓÉÓÔÅͦ, ÑËÁ ÍÁ¤ ÄÅÍÏÎ rwho\n"
-"(ÐÏĦÂÎÉÊ ÄÏ ÄÅÍÏÎÁ finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "úÁÐÕÓË Ú×ÕËÏ×ϧ ÓÉÓÔÅÍÉ ÎÁ ×ÁÛ¦Ê ÍÁÛÉΦ"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"syslog - ÃÅ ÓÅÒ×¦Ó × ÓÉÓÔÅͦ, ÚÁ ÄÏÐÏÍÏÇÏÀ ÑËÏÇÏ ÄÅÍÏÎÉ ÚÁÐÉÓÕÀÔØ\n"
-"ÓÉÓÔÅÍΦ ÐÏצÄÏÍÌÅÎÎÑ Õ Ò¦ÚΦ ÓÉÓÔÅÍΦ ÆÁÊÌÉ ÒŤÓÔÒÁæ§ ÐÏצÄÏÍÌÅÎØ. ÷\n"
-"ÂÕÄØ-ÑË¦Ê ÓÉÓÔÅͦ ÎÅÐÏÇÁÎÏ ÍÁÔÉ syslog."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "úÁ×ÁÎÔÁÖÉÔÉ ÄÒÁÊ×ÅÒÉ ÄÌÑ ÐÒÉÓÔÒÏ§× usb."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"óÔÁÒÔÕ¤ ÔÁ ÚÕÐÉÎѤ ÓÅÒ×ÅÒ ÛÒÉÆÔ¦× ÄÌÑ X (ÏÂÏ×'ÑÚËÏ×Å ÄÌÑ ÒÏÂÏÔÉ\n"
-"ÓÅÒ×ÅÒÁ XFree)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"÷ÉÂÅÒ¦ÔØ, Ñ˦ ÓÅÒצÓÉ ÍÁÀÔØ ÓÔÁÒÔÕ×ÁÔÉ Á×ÔÏÍÁÔÉÞÎÏ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "äÒÕË"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "¶ÎÔÅÒÎÅÔ"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "óÉÓÔÅÍÎÉÊ ÒÅÖÉÍ"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "ïÐæ§ צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒÁ"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "âÁÚÁ ÄÁÎÉÈ"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "óÅÒ×ÅÒ"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "ÐÒÁÃÀÀ"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "ÚÕÐÉÎÅÎÏ"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "óÅÒצÓÉ ÔÁ ÄÅÍÏÎÉ"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"÷ÉÂÁÞÔÅ, ÎÅÍÁ¤ ÄÏÄÁÔËÏ×ϧ \n"
-"¦ÎÆÏÒÍÁæ§ ÐÒÏ ÃÅÊ ÓÅÒצÓ."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "ðÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"îÅ ÍÏÖÕ ÐÒÏÞÉÔÁÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×, ×ÏÎÁ ÚÁÎÁÄÔÏ Ú¦ÐÓÏ×ÁÎÁ ÄÌÑ\n"
-"ÍÅÎÅ :(\n"
-"ñ ÓÐÒÏÂÕÀ ÓÔÅÒÔÉ Ú¦ÐÓÏ×ÁΦ ЦÄÒÏÚĦÌÉ"
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "ðÏÍÉÌËÁ!"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "îÅ ÍÏÖÕ ÚÎÁÊÔÉ ÐÏÔÒ¦ÂÎÉÊ ÆÁÊÌ ¦Ú ÚÏÂÒÁÖÅÎÎÑÍ `%s'"
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ Á×ÔÏÍÁÔÉÞÎϧ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"÷É ÍÏÖÅÔÅ ÚÁÒÁÚ ÎÁÓÔÒϧÔÉ ÄÉÓËÅÔÕ ÄÌÑ Á×ÔÏÍÁÔÉÚÏ×ÁÎϧ ÕÓÔÁÎÏËÉ. ãÅÊ\n"
-"ÒÅÖÉÍ ÕÓÔÁÎÏ×ËÉ ÄÅÝÏ ÎÅÂÅÚÐÅÞÎÉÊ ¦ ÎÉÍ ÔÒÅÂÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ\n"
-"ÐÏͦÒËÏ×ÁÎÏ.\n"
-"\n"
-"ëÏÒÉÓÔÕÀÞÉÓØ ÃÉÍ ÒÅÖÉÍÏÍ ÷É ÍÏÖÅÔÅ ÐÏ×ÔÏÒÉÔÉ ÕÓÔÁÎÏ×ËÕ, ÝÏ ÷É\n"
-"Ô¦ÌØËÉ-ÝÏ ×ÉËÏÎÁÌÉ ÎÁ ÄÁÎ¦Ê ÓÉÓÔÅͦ. îÁ ÄÅÑËÉÈ ÅÔÁÐÁÈ ÷ÁÍ ÂÕÄÕÔØ\n"
-"ÚÁÄÁΦ ÚÁÐÉÔÁÎÎÑ, ÝÏ ÚͦÎÉÔÉ ÚÎÁÞÅÎÎÑ Ë¦ÌØËÏÈ ÚͦÎÎÉÈ.\n"
-"\n"
-"äÌÑ ÷ÁÛϧ ÂÅÚÐÅËÉ, ÐÏÄ¦Ì ÄÉÓËÕ ÎÁ ЦÄÒÏÚĦÌÉ ¦ ÆÏÒÍÁÔÕ×ÁÎÎÑ Î¦ËÏÌÉ ÎÅ\n"
-"ÂÕÄÅ ×ÉËÏÎÕ×ÁÔÉÓØ Á×ÔÏÍÁÔÉÞÎÏ ÎÅÚÁÌÅÖÎÏ ×¦Ä ÔÏÇÏ, ÝÏ ×ÉÂÒÁÎÏ ÐÒÉ\n"
-"ÕÓÔÁÎÏ×æ.\n"
-"\n"
-"èÏÞÅÔÅ ÐÒÏÄÏ×ÖÕ×ÁÔÉ? "
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ËÒÏË¦× ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"äÌÑ ËÏÖÎÏÇÏ ËÒÏËÕ, ÂÕÄØ ÌÁÓËÁ, ×ËÁÖ¦ÔØ ÞÉ ÐÒÉ ÐÏ×ÔÏÒÎ¦Ê ÕÓÔÁÎÏ×æ ÃÅÊ\n"
-"ËÒÏË ×ÉËÏÎÁ¤ÔØÓÑ Á×ÔÏÍÁÔÉÞÎÏ, ÞÉ ×ÒÕÞÎÕ."
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "÷¦ÔÁÎÎÑ!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"äÉÓËÅÔÁ ÓÔ×ÏÒÅÎÁ ÕÓЦÛÎÏ.\n"
-"÷É ÍÏÖÅÔÅ ÐÏ×ÔÏÒÉÔÉ ÕÓÔÁÎÏ×ËÕ."
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "óЦÌØÎÅ ×ÉËÏÒÉÓÔÁÎÎ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÍÉËÎÅÎÅ"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"õÓÔÁÎÏ×ËÁ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÖÅ\n"
-"ÚÒÏÂÌÅÎÁ. óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ × ÄÁÎÉÊ ÍÏÍÅÎÔ ÄÏÚ×ÏÌÅÎÅ.\n"
-"\n"
-"ýÏ ÷É ÂÁÖÁ¤ÔÅ ÚÒÏÂÉÔÉ?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "ÚÁÂÏÒÏÎÉÔÉ"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "ÐÒÉÂÒÁÔÉ"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "ÐÅÒÅÎÁÓÔÒϧÔÉ"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "úÁÂÏÒÏÎÁ ÓÅÒ×ÅÒ¦×..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÉÍËÎÅÎÅ"
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÉÍËÎÅÎÅ"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"õÓÔÁÎÏ×ËÁ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÖÅ\n"
-"ÚÒÏÂÌÅÎÁ. óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ × ÄÁÎÉÊ ÍÏÍÅÎÔ ×ÉÍËÎÅÎÅ.\n"
-"\n"
-"ýÏ ÷É ÂÁÖÁ¤ÔÅ ÚÒÏÂÉÔÉ?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "ÄÏÚ×ÏÌÉÔÉ"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "÷ÍÉËÁÀ ÓÅÒ×ÅÒÉ..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÍÉËÎÅÎÅ"
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"ôÅÐÅÒ Ð¦ÓÌÑ ÔÏÇÏ, ÑË ÐÁÒÁÍÅÔÒÉ ÷ÁÛÏÇÏ Ú'¤ÄÎÁÎÎÑ Ú ¶ÎÔÅÒÎÅÔÏÍ\n"
-"×ÓÔÁÎÏ×ÌÅΦ, ÷É ÍÏÖÅÔÅ ÓËÏƦ­ÕÒÕ×ÁÔÉ Ó×¦Ê ËÏÍÐ'ÀÔÅÒ ÔÁËÉÍ ÞÉÎÏÍ, ÝÏÂ\n"
-"צΠÄÏÚ×ÏÌÑ× ÓЦÌØÎÅ ×ÉËÏÒÉÓÔÁÎÎÑ Ó×ÏÇÏ Ú'¤ÄÎÁÎÎÑ ÄÏ\n"
-"¶ÎÔÅÒÎÅÔÕ. \n"
-"\n"
-"ðÒÉͦÔËÁ: ÷ÁÍ ÄÌÑ ÃØÏÇÏ ÐÏÔÒ¦ÂÎÏ ÍÁÔÉ ÐÌÁÔÕ ÍÅÒÅÖ¦, ÝÏ ÎÁÓÔÒϧÔÉ\n"
-"ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ (LAN)."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "¶ÎÔÅÒÆÅÊÓ %s (Ú ×ÉËÏÒÉÓÔÁÎÎÑÍ ÍÏÄÕÌÑ %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "¶ÎÔÅÒÆÅÊÓ %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÓËÏÎƦ­ÕÒÏ×ÁÎÏÇÏ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦\n"
-"ethernet. óËÏÒÉÓÔÁÊÔÅÓØ, ÂÕÄØ-ÌÁÓËÁ, ÐÒÏÇÒÁÍÏÀ ÄÌÑ ËÏÎƦÇÕÒÁæ§\n"
-"ÁÐÁÒÁÔÎÉÈ ÚÁÓϦ×."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "¶ÎÔÅÒÆÅÊÓ ÍÅÒÅÖ¦"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÐÒÉÓÕÔÎ¦Ê Ô¦ÌØËÉ ÏÄÉÎ ÁÄÁÐÔÅÒ ÍÅÒÅÖ¦:\n"
-"\n"
-"%s\n"
-"\n"
-"úÁÒÁÚ ÂÕÄÅ ×ÓÔÁÎÏ×ÌÅÎÁ ÌÏËÁÌØÎÁ ÍÅÒÅÖÁ Ú ÃÉÍ ÁÄÁÐÔÅÒÏÍ."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÑËÉÊ ÁÄÁÐÔÅÒ ÍÅÒÅÖ¦ ÂÕÄŠЦÄËÌÀÞÅÎÏ ÄÏ ÌÏËÁÌØÎϧ\n"
-"ÍÅÒÅÖ¦."
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"õ×ÁÇÁ: ÐÌÁÔÕ ÍÅÒÅÖ¦ ×ÖÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ.\n"
-"ëÏÎƦ­ÕÒÁæÀ ÂÕÄÅ ÚͦÎÅÎÏ"
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "÷ ÄÁÎ¦Ê ËÏÎƦÇÕÒÁæ§ %s ÚÎÁÊÄÅÎÏ ÐÏÔÅÎæÊÎÉÊ ËÏÎÆ̦ËÔ ÁÄÒÅÓÉ ÍÅÒÅÖ¦!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "úÎÁÊÄÅÎÏ ËÏÎƦ­ÕÒÁæÀ firewall!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"õ×ÁÇÁ! úÎÁÊÄÅÎÁ ¦ÓÎÕÀÞÁ ËÏÎƦ­ÕÒÁÃ¦Ñ firewall. íÏÖÌÉ×Ï ÷ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
-"ÂÕÄÅ ×ÉËÏÎÁÔÉ ÄÅÑ˦ ÚͦÎÉ Ð¦ÓÌÑ ÕÓÔÁÎÏ×ËÉ."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "ëÏÎƦÇÕÒÁæÑ..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÓËÒÉÐÔ¦×, ÕÓÔÁÎÏ×ËÁ ÐÒÏÇÒÁÍ, ÓÔÁÒÔÕ×ÁÎÎÑ ÓÅÒ×ÅÒ¦×..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "ðÏÍÉÌËÉ ÐÒÉ ÕÓÔÁÎÏ×æ ÐÁËÅÔÕ %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"÷ÓÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ.  \n"
-"\n"
-"÷É ÍÏÖÅÔÅ ÓЦÌØÎÏ ËÏÒÉÓÔÕ×ÁÔÉÓÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ÒÁÚÏÍ Ú ¦ÎÛÉÍÉ\n"
-"ËÏÍÐ'ÀÔÅÒÁÍÉ × ×ÁÛ¦Ê ÌÏËÁÌØÎ¦Ê ÍÅÒÅÖ¦, Ú ×ÉËÏÒÉÓÔÁÎÎÑÍ Á×ÔÏÍÁÔÉÞÎÏÇÏ\n"
-"ËÏÎƦ­ÕÒÕ×ÁÎÎÑ ÍÅÒÅÖ¦ (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"õÓÔÁÎÏ×ËÁ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÖÅ ÚÒÏÂÌÅÎÁ,\n"
-"ÁÌÅ ÎÁ ÄÁÎÉÊ ÍÏÍÅÎÔ ×ÏÎÏ ×¦ÄËÌÀÞÅÎÏ."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"õÓÔÁÎÏ×ËÁ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÖÅ ÚÒÏÂÌÅÎÁ,\n"
-"ÎÁ ÄÁÎÉÊ ÞÁÓ ×ÏÎÏ ÄÏÚ×ÏÌÅÎÏ."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ÓËÏÎƦÇÕÒÏ×ÁÎÏ"
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÓЦÌØÎÏÇÏ ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ."
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ ÄÏ ÐÒÏÇÒÁÍÉ ËÏÎƦ­ÕÒÁæ§ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ\n"
-"Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ\n"
-"\n"
-"%s\n"
-"\n"
-"ëÌÁÃΦÔØ ÎÁ \"îÁÓÔÒϧÔÉ\" ÝÏ ÚÁÐÕÓÔÉÔÉ ËÏÎƦ­ÕÒÁÔÏÒ."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦ (%d ÐÌÁÔ)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "ðÒÏƦÌØ: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "óÔÅÒÔÉ ÐÒÏƦÌØ..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "ðÒÏƦÌØ ÄÌÑ ÓÔÉÒÁÎÎÑ:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "îÏ×ÉÊ ÐÒÏƦÌØ..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"îÁÚ×Á ÐÒÏƦÌÀ ÄÌÑ ÓÔ×ÏÒÅÎÎÑ (ÎÏ×ÉÊ ÐÒÏƦÌØ ÓÔ×ÏÒÀ¤ÔØÓÑ ÑË ËÏÐ¦Ñ ×ÖÅ "
-"¦ÓÎÕÀÞÏÇÏ):"
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "¶Í'Ñ ÈÏÓÔÁ:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "äÏÓÔÕÐ ÄÏ ¦ÎÔÅÒÎÅÔÕ"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "ôÉÐ:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "ûÌÀÚ:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "¶ÎÔÅÒÆÅÊÓ:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "óÔÁÔÕÓ:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "ú'¤ÄÎÁÎÏ"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "îÅÍÁ¤ Ú'¤ÄÎÁÎÎÑ"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "ú'¤ÄÎÁÎÎÑ..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "÷¦ÄËÌÀÞÅÎÎÑ..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "ðÏÞÉÎÁÀ Ú'¤ÄÎÁÎÎÑ..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "úÁËÒÉ×ÁÀ Ú'¤ÄÎÁÎÎÑ..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"ú'¤ÄÎÁÎÎÑ ÎÅ ÚÁËÒÉÔÅ.  \n"
-"\n"
-"óÐÒÏÂÕÊÔÅ ÚÒÏÂÉÔÉ ÃÅ ×ÒÕÞÎÕ ×ÉËÏÎÁ×ÛÉ ÓËÒÉÐÔ\n"
-"/etc/sysconfig/network-scripts/net_cnx_down ÑË \n"
-"ÁÄͦΦÓÔÒÁÔÏÒ (root)"
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "óÉÓÔÅÍÁ צÄ'¤ÄÎÁÎÁ"
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "îÁÓÔÒϧÔÉ ÄÏÓÔÕÐ ÄÏ ¦ÎÔÅÒÎÅÔÕ..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "äÒÁÊ×ÅÒ"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "¶ÎÔÅÒÆÅÊÓ"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "ðÒÏÔÏËÏÌ"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "óÔÁÔÕÓ"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "îÁÓÔÒϧÔÉ ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "úÁÓÔÏÓÕ×ÁÔÉ"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "úÁÞÅËÁÊÔÅ, ÂÕÄØ ÌÁÓËÁ. ôÅÓÔÕ×ÁÎÎÑ ËÏÎƦ­ÕÒÁæ§"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"õ ×ÁÓ ÎÅÍÁ¤ ÖÏÄÎÏÇÏ ÓËÏÎƦ­ÕÒÏ×ÁÎÏÇÏ ¦ÎÔÅÒÆÅÊÓÁ.\n"
-"óËÏÎƦ­ÕÒÕÊÔÅ §È ÓÐÏÞÁÔËÕ, ËÌÁÃÎÕ×ÛÉ ÎÁ \"îÁÓÔÒϧÔÉ\""
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "ðÌÁÔÁ %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "ðÒÏÔÏËÏÌ ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "óÔÁÒÔÕ×ÁÔÉ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "Ë̦¤ÎÔ DHCP"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "ÁËÔÉצÚÕ×ÁÔÉ ÚÁÒÁÚ"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "ÄÅÁËÔÉצÚÕ×ÁÔÉ ÚÁÒÁÚ"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"÷É ÎÅ ÍÁ¤ÔÅ ÖÏÄÎÏÇÏ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ.\n"
-"óÔ×ÏÒ¦ÔØ ÔÁËÅ Ú'¤ÄÎÁÎÎÑ ËÌÁÃÎÕ×ÛÉ ÎÁ \"îÁÓÔÒϧÔÉ\""
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "ôÉÐ Ú×'ÑÚËÕ:"
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "ðÁÒÁÍÅÔÒÉ"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "ðÌÁÔÁ Ethernet"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "ë̦¤ÎÔ DHCP"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "úÌÏÍÝÉËÉ! ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ!"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "äÕÖÅ ÎÉÚØËÉÊ"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "ðÁÒÁÎϦÄÁÌØÎÉÊ"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"ãÅÊ Ò¦×ÅÎØ ÐÏÔÒ¦ÂÎÏ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ Ú ÏÂÅÒÅÖΦÓÔÀ. ÷¦Î ÄÏÚ×ÏÌѤ ¦ÌØÛ\n"
-"ÐÒÏÓÔÅ ËÏÒÉÓÔÕ×ÁÎÎÑ ÷ÁÛÏÀ ÓÉÓÔÅÍÏÀ, ÁÌÅ ¤ ÎÁÄÚ×ÉÞÁÊÎÏ ÎÅÎÁĦÊÎÉÍ. îÅ\n"
-"ÍÏÖÎÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÔÁËÏÀ ÓÉÓÔÅÍÏÀ, ËÏÌÉ ×ÏÎÁ ЦÄ'¤ÄÎÁÎÁ ÍÅÒÅÖÅÀ ÄÏ\n"
-"¦ÎÛÉÈ ÓÉÓÔÅÍ, ÁÂÏ ÄÏ ¦ÎÔÅÒÎÅÔÕ. ðÁÒÏ̦ ÎÅ ×ÉËÏÒÉÓÔÏ×ÕÀÔØÓÑ × Ã¦Ê\n"
-"ÓÉÓÔÅͦ."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"ðÁÒÏ̦ ÔÅÐÅÒ ×ÍÉËÎÅΦ, ÁÌÅ ×ÓÅ ÏÄÎÏ ÎÅ ÒÅËÏÍÅÎÄÕ¤ÔØÓÑ ËÏÒÉÓÔÕ×ÁÔÉÓÑ\n"
-"ÃÉÍ ËÏÍÐ'ÀÔÅÒÏÍ × ÍÅÒÅÖ¦."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"ë¦ÌØËÁ ÐÏËÒÁÝÅÎØ ÎÁ ÃØÏÍÕ Ò¦×Φ ÚÁÈÉÓÔÕ. ïÓÎÏ×ÎÅ ÐÏËÒÁÝÅÎÎÑ - ¦ÌØÛÁ\n"
-"˦ÌØ˦ÓÔØ ÐÏצÄÏÍÌÅÎØ ÐÒÏ ÐÏÒÕÛÅÎÎÑ ÂÅÚÐÅËÉ ÔÁ ¦ÌØÛÁ ˦ÌØ˦ÓÔØ\n"
-"ÐÅÒÅצÒÏË."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"ãÅ - ÓÔÁÎÄÁÒÔÎÉÊ Ò¦×ÅÎØ ÂÅÚÐÅËÉ, ÑËÉÊ ÒÅËÏÍÅÎÄÕ¤ÔØÓÑ ÍÁÔÉ ÎÁ\n"
-"ËÏÍÐ'ÀÔÅÒ¦, ЦÄËÌÀÞÅÎÏÍÕ ÄÏ ¦ÎÔÅÒÎÅÔÕ × ÑËÏÓÔ¦ Ë̦¤ÎÔÁ. ðÅÒÅצÒËÉ\n"
-"ÂÅÚÐÅËÉ ÔÅÐÅÒ ×ÍÉËÎÅΦ."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"îÁ ÃØÏÍÕ Ò¦×Φ ÂÅÚÐÅËÉ ÓÉÓÔÅÍÕ ÍÏÖÎÁ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ × ÑËÏÓÔ¦ ÓÅÒ×ÅÒÁ.\n"
-"ò¦×ÅÎØ ÂÅÚÐÅËÉ ÄÌÑ Ã¦¤§ ÓÉÓÔÅÍÉ ÔÅÐÅÒ ÄÏÓÔÁÔÎ¦Ê ÄÌÑ ÔÏÇÏ, ÝÏÂ\n"
-"×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ §§ ÑË ÓÅÒ×ÅÒ, ÝÏ ÄÏÐÕÓËÁ¤ ЦÄ'¤ÄÎÁÎÎÑ ÄÏ ÎØÏÇÏ\n"
-"ÂÁÇÁÔØÏÈ Ë̦¤ÎÔ¦×."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"íÉ ×ÍÉËÁ¤ÍÏ 4 Ò¦×ÅÎØ ÂÅÚÐÅËÉ, ÁÌÅ ÔÅÐÅÒ ÓÉÓÔÅÍÁ ¤ ÐÏ×ΦÓÔÀ ÚÁËÒÉÔÏÀ.\n"
-"÷Ó¦ ÒÅÖÉÍÉ ÂÅÚÐÅËÉ ÔÅÐÅÒ ÎÁ ÎÁÊ×ÉÝÏÍÕ Ò¦×Φ."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "÷ÓÔÁÎÏ×ÌÅÎÎÑ Ò¦×ÎÑ ÂÅÚÐÅËÉ"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁÒÁÍÅÔÒÉ ÄÌÑ ÓÅÒ×ÅÒÁ"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "÷ÓÔÁÎÏ×ÌÅÎÎÑ Ò¦×ÎÑ ÂÅÚÐÅËÉ"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "ãÅÎÔÒ ËÅÒÕ×ÁÎÎÑ"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "÷ÉÂÅÒ¦ÔØ ÚÁÓÏÂÉ, ÑËÉÍÉ ÷É ÈÏÞÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "×ÉËÏÒÉÓÔÁÎÎÑ: keyboarddrake [--expert] [ËÌÁצÁÔÕÒÁ]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "÷É ÈÏÞÅÔÅ ÝÏ BackSpace ÄÁ×Á× Delete  ÎÁ ËÏÎÓÏ̦?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "úͦΦÔØ ËÏÍÐÁËÔ-ÄÉÓË"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"âÕÄØ-ÌÁÓËÁ, ×ÓÔÁ×ÔÅ ËÏÍÐÁËÔ-ÄÉÓË, ÐÏÚÎÁÞÅÎÉÊ \"%s\" Õ ÐÒÉÓÔÒ¦Ê ¦\n"
-"ÎÁÔÉÓΦÔØ çÁÒÁÚÄ Ð¦ÓÌÑ ÃØÏÇÏ.\n"
-"\n"
-"ñËÝÏ ÷É ÎÅ ÍÁ¤ÔÅ ÔÁËÏÇÏ ÄÉÓËÕ, ÎÁÔÉÓΦÔØ ÷¦ÄͦÎÉÔÉ, ÝÏ ÎÅ\n"
-"×ÓÔÁÎÏ×ÌÀ×ÁÔÉ Ú ÃØÏÇÏ ÄÉÓËÕ."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "îÅ ÍÏÖÕ ÓÔÁÒÔÕ×ÁÔÉ \"ÖÉ×Å ÐÏÎÏ×ÌÅÎÎÑ\"!!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "ÎÅ ÚÎÁÊÄÅÎÏ serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "¶Í¦ÔÕ×Á×ÁÔÉ ÔÒÉ ËÎÏÐËÉ?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ firewall"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ firewall!"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"úÁÈÉÓÔ\n"
-"\n"
-"÷É ×ÖÅ ÍÁ¤ÔÅ ×ÓÔÁÎÏ×ÌÅÎÉÊ firewall. ýÏ ÚͦÎÉÔÉ ËÏÎƦ­ÕÒÁæÀ ÞÉ\n"
-"צÄͦÎÉÔÉ ÚÁÈÉÓÔ ËÌÁÃΦÔØ ÎÁ \"îÁÓÔÒϧÔÉ\""
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"úÁÈÉÓÔ\n"
-"\n"
-"ýÏ ×ÓÔÁÎÏ×ÉÔÉ ÓÔÁÎÄÁÒÔÎÕ ËÏÎƦ­ÕÒÁæÀ firewall, ËÌÁÃΦÔØ ÎÁ\n"
-"\"îÁÓÔÒϧÔÉ\""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "÷ÉÂÅÒ¦ÔØ ÍÏ×Õ"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "÷ÉÂÅÒ¦ÔØ ÔÉÐ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "÷ÉÚÎÁÞÅÎÎÑ ÔÉÐÕ ÄÉÓËÕ"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "óËÏÎƦÇÕÒÕÊÔÅ ÍÉÛÕ"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "÷ÉÂÅÒ¦ÔØ ÔÉÐ ËÌÁצÁÔÕÒÉ"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "âÅÚÐÅËÁ"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "õÓÔÁÎÏ×ËÁ ÆÁÊÌ. ÓÉÓÔÅÍ"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "æÏÒÍÁÔÕ×ÁÔÉ Ð¦ÄÒÏÚĦÌÉ"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "÷ÉÂ¦Ò ÐÁËÅÔ¦×"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "îÁÓÔÒϧÔÉ ÍÅÒÅÖÕ"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "îÁÓÔÒϧÔÉ ÓÅÒצÓÉ"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "óÔ×ÏÒÉÔÉ Á×ÁÒ¦ÊÎÕ ÄÉÓËÅÔÕ"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "âÌÏË ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "îÁÓÔÒϧÔÉ X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "÷ÉÊÔÉ Ú ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"íÁÎÀÓ¦ÎØËÉÊ ÂÒÁÎÄÍÁÕÅÒ\n"
-"\n"
-"㦠ÕÓÔÁÎÏ×ËÉ ËÏÎƦ­ÕÒÕÀÔØ ÐÅÒÓÏÎÁÌØÎÉÊ ÂÒÁÎÄÍÁÕÅÒ (a.k.a. firewall) ÎÁ\n"
-"ÄÁÎ¦Ê ÍÁÛÉΦ Ú ì¦ÎÁËÓ íÁÎÄÒÅÊË. äÌÑ ÔÏÇÏ, ÝÏ ×ÓÔÁÎÏ×ÉÔÉ ÓÅÒÊÏÚÎÉÊ\n"
-"ÐÏÔÕÖÎÉÊ ÂÒÁÎÄÍÁÕÅÒ, Ú×ÅÒΦÔØÓÑ, ÂÕÄØ ÌÁÓËÁ, ÄÏ ÓÐÅæÁ̦ÚÏ×ÁÎÏÇÏ\n"
-"ÄÉÓÔÒÉÂÕÔÉ×Á MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"úÁÒÁÚ ×ÁÍ ÂÕÄÕÔØ ÚÁÄÁΦ ÚÁÐÉÔÁÎÎÑ ÐÒÏ ÓÅÒצÓÉ, Ñ˦ ×É ÈÏÞÅÔÅ ÄÏÚ×ÏÌÉÔÉ\n"
-"ÄÌÑ Ú'¤ÄÎÁÎÎÑ × ¦ÎÔÅÒÎÅÔ¦. ïÂÅÒÅÖÎÏ ÐÏÓÔÁ×ÔÅÓÑ ÄÏ ÃÉÈ ÚÁÐÉÔÁÎØ,\n"
-"ÏÓ˦ÌØËÉ ×¦Ä ÃØÏÇÏ ÚÁÌÅÖÉÔØ ÂÅÚÐÅËÁ ×ÁÛϧ ÓÉÓÔÅÍÉ.\n"
-"\n"
-"ñËÝÏ ×É ÎÁ ÄÁÎÉÊ ÞÁÓ ÎÅ ËÏÒÉÓÔÕ¤ÔÅÓØ ÄÅÑËÉÍÉ Ú ÃÉÈ ÓÅÒצӦ×,\n"
-"ÚÁÂÏÒÏΦÔØ §È ×ÉËÏÒÉÓÔÁÎÎÑ. ð¦ÚΦÛÅ ×É ÚÍÏÖÅÔÅ ÚͦÎÉÔÉ Ó×ÏÀ\n"
-"ËÏÎƦÇÕÒÁæÀ ÂÕÄØ-ËÏÌÉ ÐÒÏÓÔÏ ÝÅ ÒÁÚ ÓËÏÒÉÓÔÕ×Á×ÛÉÓØ Ã¦¤À \n"
-"ÐÒÏÇÒÁÍÏÀ. "
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"þÉ  ÐÒÁÃÀ¤  ÎÁ Ã¦Ê  ÍÁÛÉΦ  ×ÅÂ-ÓÅÒ×ÅÒ,  ÑËÉÊ  ÐÏÔÒ¦ÂÎÏ ÂÁÞÉÔÉ  ×ÓØÏÍÕ\n"
-"¶ÎÔÅÒÎÅÔÕ? ñËÝÏ  ×É ËÏÒÉÓÔÕ¤ÔÅÓØ Ô¦ÌØËÉ ÔÁËÉÍ  ÓÅÒ×ÅÒÏÍ, ÑËÉÊ ÐÏÔÒ¦ÂÎÏ\n"
-"ÂÁÞÉÔÉ Ô¦ÌØËÉ Ú Ã¦¤§ ÍÁÛÉÎÉ, ÍÏÖÅÔÅ ÓÐÏ˦ÊÎÏ ×¦ÄÐÏצÓÔÉ ÔÕÔ \"î¦\"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"þÉ ×É ËÏÒÉÓÔÕ¤ÔÅÓØ ÓÅÒ×ÅÒÏÍ ¦ÍÅÎ ÎÁ Ã¦Ê ÍÁÛÉÎÉ? ñËÝÏ ×É ÎÅ ÒÏÂÉÌÉ\n"
-"ÕÓÔÁÎÏ×ËÉ ÓÅÒ×ÅÒÁ ÄÌÑ ÔÏÇÏ, ÝÏ צÄÐÏצÄÁÔÉ ÎÁ ÚÁÐÉÔÉ IP ÁÄÒÅÓ ×ÓØÏÇÏ\n"
-"¶ÎÔÅÒÎÅÔÕ, צÄÐÏצÄÁÊÔÅ \"î¶\".\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"þÉ ÈÏÞÅÔÅ ×É ÄÏÚ×ÏÌÉÔÉ ×ȦÄΦ Ú'¤ÄÎÁÎÎÑ Ú ×¦ÄËÒÉÔÔÑÍ ÂÅÚÐÅÞÎϧ\n"
-"ËÏÍÁÎÄÎϧ ÏÂÏÌÏÎËÉ (SSH)? ãÅ - ÚÁͦÎÁ telnet, ÑËÉÊ ×É, ÍÏÖÌÉ×Ï,\n"
-"ÚÁÈÏÔ¦ÌÉ Â ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÄÌÑ ×¦ÄÄÁÌÅÎϧ ÒŤÓÔÒÁæ§. ñËÝÏ ×É ÚÁÒÁÚ\n"
-"ËÏÒÉÓÔÕ¤ÔÅÓØ telnet'ÏÍ, ×ÁÍ, ÎÁÐÅ×ÎÅ, ÞÁÓ ÐÏÄÕÍÁÔÉ ÐÒÏ ÚÁͦÎÕ ÊÏÇÏ ÎÁ\n"
-"ssh. telnet ÎÅ ÚÁÂÅÚÐÅÞÕ¤ ËÏÄÕ×ÁÎÎÑ ÐÅÒÅÄÁÞ¦ -- ÔÏÂÔÏ ÎÁÐÁÄÎÉËÉ ÍÏÖÕÔØ\n"
-"ÐÒÏÓÌÕÈÁÔÉ ×ÁÛ ÐÁÒÏÌØ × ÔÏÊ ÞÁÓ, ÑË ×É ÎÉÍ ËÏÒÉÓÔÕ¤ÔÅÓØ. ssh ÚÁËÏÄÏ×Õ¤\n"
-"ÐÁÒÏÌØ ¦ ÎÅ ÄÏÚ×ÏÌѤ ÊÏÇÏ \"ЦÄÓÌÕÈÁÔÉ\"."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"þÉ ÈÏÞÅÔÅ ×É ÄÏÚ×ÏÌÉÔÉ ×ȦÄΦ Ú'¤ÄÎÁÎÎÑ ÐÏ telnet? ãÅ - ÄÕÖÅ\n"
-"ÎÅÚÁÈÉÝÅÎÅ Ú'¤ÄÎÁÎÎÑ, ÑË ÂÕÌÏ ÐÏÑÓÎÅÎÏ ÎÁ ÐÏÐÅÒÅÄÎØÏÍÕ ÅËÒÁΦ. íÉ\n"
-"ÎÁÓÔ¦ÊÌÉ×Ï ÒÅËÏÍÅÎÄÕ¤ÍÏ ×¦ÄÐÏצÓÔÉ \"î¦\" ÔÕÔ ¦ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ssh\n"
-"ÚÁͦÓÔØ telnet. \n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"þÉ ×É ËÏÒÉÓÔÕ¤ÔÅÓØ ÔÕÔ ÓÅÒ×ÅÒÏÍ FTP, ÄÏ ÑËÏÇÏ ÐÏ×ÉÎÅÎ ÂÕÔÉ ÄÏÓÔÕÐ Ú\n"
-"¶ÎÔÅÒÎÅÔÕ? ñËÝÏ ÔÁË, ÎÁÓÔ¦ÊÌÉ×Ï ÒÅËÏÍÅÎÄÕ¤ÍÏ, ÝÏ ×É ÎÉÍ ËÏÒÉÓÔÕ×ÁÌÉÓÑ\n"
-"Ô¦ÌØËÉ ÄÌÑ ÁÎÏΦÍÎÉÈ ÐÅÒÅÄÁÞ ÄÁÎÉÈ. âÕÄØ-Ñ˦ ÐÁÒÏ̦, ÐÅÒÅÄÁΦ ÐÏ FTP\n"
-"ÍÏÖÕÔØ ÂÕÔÉ Ð¦ÄÓÌÕÈÁÎÉÍÉ ÎÁÐÁÄÎÉËÁÍÉ, ÏÓ˦ÌØËÉ FTP ÎÅ ËÏÒÉÓÔÕ¤ÔØÓÑ\n"
-"ËÒÉÐÔÏÇÒÁƦ¤À ÄÌÑ ÐÅÒÅÄÁÞ¦ ÐÁÒÏ̦×.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"þÉ Õ ×ÁÓ ÐÒÁÃÀ¤ ÐÏÛÔÏ×ÉÊ ÓÅÒ×ÅÒ? ñËÝÏ ×É ×¦ÄÓÉÌÁ¤ÔÅ ÐÏÛÔÕ ÞÅÒÅÚ pine,\n"
-"mutt ÞÉ ¦ÎÛÉÊ ÐÏÛÔÏ×ÉÊ Ë̦¤ÎÔ, ÝÏ ÐÒÁÃÀ¤ × ÔÅËÓÔÏ×ÏÍÕ ÒÅÖÉͦ, ÓËÏÒ¦ÛÅ\n"
-"×ÓØÏÇÏ ×¦ÄÐÏצÄØ \"ÔÁË\". ÷ ¦ÎÛÏÍÕ ×ÉÐÁÄËÕ - צÄͦΦÔØ ÃÅÊ ÓÅÒצÓ.\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"þÉ ÐÒÁÃÀ¤ Õ ×ÁÓ POP ÁÂÏ IMAP ÓÅÒ×ÅÒÉ? ÷ÏÎÉ ×ÉËÏÒÉÓÔÏ×ÕÀÔØÓÑ ÄÌÑ\n"
-"ÚÁÂÅÚÐÅÞÅÎÎÑ ÄÏÓÔÕÐÕ ËÏÒÉÓÔÕ×ÁÞÁÍ ÄÏ ÅÌÅÔÒÏÎÎϧ ÐÏÛÔÉ ÎÁ Ã¦Ê ÍÁÛÉΦ\n"
-"(צÄͦÎÎÁ ×¦Ä ÐÏÛÔÉ, Ú ×ÅÂ-¦ÎÔÅÒÆÅÊÓÏÍ).\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"÷É ËÏÒÉÓÔÕ¤ÔÅÓØ ÑÄÒÏÍ ×ÅÒÓ¦§ 2.2. ñËÝÏ IP ÁÄÒÅÓÉ ÎÁ ×ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦\n"
-"×ÓÔÁÎÏ×ÌÀÀÔØÓÑ Á×ÔÏÍÁÔÉÞÎÏ, ÃÅ ÐÏÔÒ¦ÂÎÏ ÄÏÚ×ÏÌÉÔÉ. þÉ ÃÅ ÔÁË?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"þÉ ×ÁÛ ËÏÍÐ'ÀÔÅÒ ÓÉÎÈÒÏΦÚÕ¤ÔØÓÑ Ú ¦ÎÛÉÍ × ÍÅÒÅÖ¦? õ ×ÅÌÉËÉÈ ÔÁ\n"
-"ÓÅÒÅÄÎØÏÇÏ ÒÏÚͦÒÕ ËÏÍÐÁΦÑÈ Ú ÓÉÓÔÅÍÁÍÉ àΦËÓ/ì¦ÎÁËÓ ÃÅ\n"
-"×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÄÌÑ ÓÉÎÈÒÏΦÚÁæ§ ÞÁÓÕ ÄÌÑ ÖÕÒÎÁÌ¦× ÒŤÓÔÒÁæ§\n"
-"ÐÒÏÔÏËÏÌ¦× ÔÏÝÏ. ñËÝÏ ×ÁÛÁ ÓÉÓÔÅÍÁ ÎÅ ¤ ÞÁÓÔÉÎÏÀ ¦ÌØÛÏÇÏ ÏƦÓÕ ¦ ×É\n"
-"ΦËÏÌÉ ÎÅ ÞÕÌÉ ÐÒÏ ÔÁËÅ, ÓËÏÒ¦ÛÅ ×ÓØÏÇÏ ×ÁÍ ÃÅ ÎÅ ÐÏÔÒ¦ÂÎÏ."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"ëÏÎƦ­ÕÒÕ×ÁÎÎÑ ÚÁ˦ÎÞÅÎÏ. íÏÖÎÁ ÚÁÐÉÓÁÔÉ Ã¦ ÚͦÎÉ ÎÁ ÄÉÓË?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "îÅ ÍÏÖÕ ×¦ÄËÒÉÔÉ %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "îÅ ÍÏÖÕ ×¦ÄËÒÉÔÉ %s ÎÁ ÚÁÐÉÓ: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "ôÅÎÅÔÁ/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "íÅÒÅÖÅ×ÉÊ ëÏÍÐ'ÀÔÅÒ (Ë̦¤ÎÔ)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "óÅÒ×ÅÒ NFS, ÓÅÒ×ÅÒ SMB, ÐÒÏËÓ¦-ÓÅÒ×ÅÒ, ÓÅÒ×ÅÒ ssh"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "ïƦÓÎÁ ÓÔÁÎæÑ"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "òÏÂÏÞÁ ÓÔÁÎÃ¦Ñ Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "úÁÓÏÂÉ ÄÌÑ Palm Pilot ÔÁ Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "òÏÂÏÞÁ ÓÔÁÎæÑ"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/íÁÒÛÒÕÔÉÚÁÔÏÒ"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "óÅÒ×ÅÒ ¦ÍÅÎ ÔÁ ÍÅÒÅÖÅ×ÉÊ ¦ÎÆÏÒÍÁæÊÎÉÊ ÓÅÒ×ÅÒ (DNS, NIS)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"ðÒÏÇÒÁÍÉ ÄÌÑ ÏƦÓÕ: ÔÅËÓÔÏצ ÐÒÏÃÅÓÏÒÉ (kword, abiword), ÂÕÈÇÁÌÔÅÒÓØ˦\n"
-"ÔÁÂÌÉæ (kspread, gnumeric), ÐÅÒÅÇÌÑÄÁÞ¦ ÆÁÊÌ¦× pdf, ÔÏÝÏ"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "ú×ÕËÏצ ÚÁÓÏÂÉ: ÐÒÏÇÒÁ×ÁÞ¦ mp3 ÔÁ midi, ͦËÛÅÒÉ, ÔÏÝÏ"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "ëÎÉÖËÉ  ÔÁ HOWTO ÐÒÏ ì¦ÎÁËÓ ÔÁ צÌØÎÅ ÐÒÏÇÒÁÍÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "òÏÂÏÞÁ ÓÔÁÎÃ¦Ñ KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ÔÏÝÏ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "íÕÌØÔÉÍÅÄ¦Ñ - צÄÅÏ"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "îÁÂ¦Ò ÚÁÓÏÂ¦× ÄÌÑ ÐÏÛÔÉ, ÎÏ×ÉÎ, ÔÅÎÅÔ, ÐÅÒÅÄÁÞ¦ ÆÁÊ̦×, ÔÁ \"ÂÁÌÁÞÏË\""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "âÁÚÁ ÄÁÎÉÈ"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "óÅÒ×ÅÒÉ ÂÁÚ ÄÁÎÉÈ PostgreSQL ÁÂÏ MySQL "
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "úÁÓÏÂÉ ÄÌÑ ÐÏÌÅÇÛÅÎÎÑ ËÏÎƦ­ÕÒÕ×ÁÎÎÑ ×ÁÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "íÕÌØÔÉÍÅÄ¦Ñ - Ú×ÕË"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "õԦ̦ÔÉ"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "äÏËÕÍÅÎÔÁæÑ"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "úÁÓÏÂÉ ÄÌÑ ËÏÎÓÏ̦"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "ðÏÛÔÏ×ÉÊ ÓÅÒ×ÅÒ postfix, ÓÅÒ×ÅÒ ÎÏ×ÉÎ inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "óÔÁÎÃ¦Ñ ÄÌÑ ¦ÎÔÅÒÎÅÔÕ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "íÕÌØÔÉÍÅĦÊÎÁ ÓÔÁÎæÑ"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "ëÏÎƦ­ÕÒÁæÑ"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "äÏÄÁÔËÏצ ÇÒÁƦÞΦ ÓÅÒÅÄÏ×ÉÝÁ (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"òÏÂÏÞÅ ÓÅÒÅÄÏ×ÉÝÅ K (KDE) - ÏÓÎÏ×ÎÅ ÇÒÁƦÞÎÅ ÓÅÒÅÄÏ×ÉÝÅ Ú ÎÁÂÏÒÏÍ\n"
-"ÄÏÐÏͦÖÎÉÈ ÚÁÓϦ×"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "çÒÁƦÞÎÅ ÓÅÒÅÄÏ×ÉÝÅ"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "òÏÚÒÏÂÎÉË"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "úÁÓÏÂÉ ÄÌÑ ÓÔ×ÏÒÅÎÎÑ ÔÁ ÚÁÐÉÓÕ ËÏÍÐÁËÔ-ÄÉÓ˦×"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "ïƦÓÎÁ ÒÏÂÏÞÁ ÓÔÁÎæÑ"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, ÔÏÝÏ"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "çÒÁƦÞΦ ÐÒÏÇÒÁÍÉ - ÔÁ˦ ÑË The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "â¦Â̦ÏÔÅËÉ ÄÌÑ ÐÒÏÇÒÁÍÕ×ÁÎÎÑ × C, C++ ÐÒÏÇÒÁÍÉ ÔÁ ÆÁÊÌÉ ÚÁÇÏÌÏ×˦×"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "íÅÒÅÖÅ×ÉÊ ËÏÍÐ'ÀÔÅÒ (ÓÅÒ×ÅÒ)"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "ðÏÛÔÁ/ ÐÒÏÇÒÁÍÉ ÄÌÑ ÒÏÂÏÞÉÈ ÇÒÕÐ/ÎÏ×ÉÎÉ"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "¶ÇÒÏ×Á ÓÔÁÎæÑ"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "ðÒÏÇÒÁ×ÁÞ¦ צÄÅÏ ÔÁ צÄÅÏ-ÒÅÄÁËÔÏÒÉ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "íÕÌØÔÉÍÅÄ¦Ñ - ÇÒÁƦËÁ"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "ðÒÏÇÒÁÍÉ ÄÌÑ ÒÏÚ×ÁÇ: ¦ÇÒÉ-ÐÏÇÏΦ, ¦ÇÒÉ ÎÁ ÄÏÛæ, ÓÔÒÁÔÅǦÞΦ, ÔÏÝÏ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"îÁÂ¦Ò ÚÁÓÏÂ¦× ÄÌÑ ÐÒÏÞÉÔÁÎÎÑ ÔÁ ÐÅÒÅÄÁÞ¦ ÅÌÅËÔÒÏÎÎϧ ÐÏÛÔÉ ÔÁ ÇÒÕÐ\n"
-"ÎÏ×ÉÎ (pine, mutt, tin..) ÔÁ ÄÌÑ ÐÅÒÅÇÌÑÄÕ ¦ÎÆÏÒÍÁæÊÎÉÈ ÔÅÎÅÔ"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "áÒȦ×Õ×ÁÎÎÑ, ÅÍÕÌÑÔÏÒÉ, ÚÁÓÏÂÉ ÄÌÑ ÍÏΦÔÏÒÉέÕ"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "ðÅÒÓÏÎÁÌØΦ ƦÎÁÎÓÉ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"çÒÁƦÞÎÅ ÓÅÒÅÄÏ×ÉÝÅ Ú ÄÒÕÖÎ¦Í ¦ÎÔÅÒÆÅÊÓÏÍ ÔÁ ÐÒÏÇÒÁÍÁÍÉ, ÚÁÓÏÂÉ ÄÌÑ\n"
-"ÒÏÂÏÞÏÇÏ ÓÔÏÌÁ"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "ë̦¤ÎÔÉ ÄÌÑ Ò¦ÚÎÉÈ ÐÒÏÔÏËÏÌ¦× (ssh ×ËÌÀÞÎÏ)"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "¶ÎÔÅÒÎÅÔ-ÛÌÀÚ"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "ú×ÕËÏצ ÔÁ צÄÅÏ ÐÒÏÇÒ×ÁÞ¦ ÔÁ ÒÅÄÁËÔÏÒÉ"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "¶ÎÛ¦ ÒÏÂÏÞ¦ ÓÅÒÅÄÏ×ÉÝÁ"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "òÅÄÁËÔÏÒÉ, ËÏÍÁÎÄΦ ÏÂÏÌÏÎËÉ, ÆÁÊÌÏצ ÚÁÓÏÂÉ ÔÁ ÔÅÒͦÎÁÌÉ"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "ðÒÏÇÒÁÍÉ ÄÌÑ ÐÅÒÓÏÎÁÌØÎÉÈ Æ¦ÎÁÎÓÏ×ÉÈ ÏÂÒÁÈÕÎË¦× (ÔÉÐÕ gnucash)"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "¶ÇÒÉ"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "íÅÎÅÄÖÅÒ ÏÓÏÂÉÓÔϧ ¦ÎÆÏÒÍÁæ§"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "íÕÌØÔÉÍÅÄ¦Ñ - ÚÁÐÉÓ ËÏÍÐÁËÔ-ÄÉÓ˦×"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "îÁÕËÏ×Á ÒÏÂÏÞÁ ÓÔÁÎæÑ"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "ÎÅ ÍÏÖÕ ×¦ÄËÒÉÔÉ /etc/sysconfig/autologin ÎÁ ÐÒÏÞÉÔÁÎÎÑ: %s\""
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "þÉ ÷É ÈÏÞÅÔÅ ÐÅÒÅÚÁÐÕÓÔÉÔÉ ÍÅÒÅÖÕ?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "÷É ÐÏÇÏÄÖÕ¤ÔÅÓØ?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "úÁÒÁÚ ÂÕÄÅ ÐÅÒÅÚÁÐÕÝÅÎÉÊ ÐÒÉÓÔÒ¦Ê ÍÅÒÅÖ¦:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "úÁÒÁÚ ÂÕÄÅ ÐÅÒÅÚÁÐÕÝÅÎÉÊ ÐÒÉÓÔÒ¦Ê ÍÅÒÅÖ¦ %s. ÷É ÐÏÇÏÄÖÕ¤ÔÅÓØ?"
-
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "ñËÝÏ ÎÅ ×ËÁÚÁÎÏ ¦ÎÁËÛÅ, ÔÏ ÎÁÊÞÁÓÔ¦ÛÉÊ ×ÉÂ¦Ò - ÃÅ \"/dev/hda\" (ÐÅÒÛÉÊ\n"
-#~ "ÄÉÓË ÎÁ ÐÅÒÛÏÍÕ IDE ËÁÎÁ̦) ÁÂÏ \"/dev/sda\" (ÐÅÒÛÉÊ ÄÉÓË SCSI)."
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "ôÁ˦ ÐÒÉÎÔÅÒÉ ×ÖÅ ÓËÏÎƦ­ÕÒÏ×ÁΦ.\n"
-#~ "÷É ÍÏÖÅÔÅ ÁÂÏ ÄÏÄÁÔÉ ÝÅ ÄÅÑ˦, ÁÂÏ ÚͦÎÉÔÉ Ô¦, ÝÏ ×ÖÅ ¦ÓÎÕÀÔØ."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "òÏÚÒÉ× Ú×'ÑÚËÕ ÐÒÉ ÎÅÁËÔÉ×ÎÏÓÔ¦ (ÓÅË) [beta, ÝÅ ÎÅ ×ÐÒÏ×ÁÄÖÅÎÏ]"
-
-#~ msgid ""
-#~ "The Mandrake Linux spreads among several CDROMs. It may be that drakX "
-#~ "has\n"
-#~ "selected packages on another CDROM than the installation CDROM, and when "
-#~ "it\n"
-#~ "needs that you put another one into the drive, it will eject the current "
-#~ "CDROM\n"
-#~ "and ask you for another one."
-#~ msgstr ""
-#~ "äÉÓÔÒÉÂÕÔÉ× íÁÎÄÒÅÊË ì¦ÎÁËÓ ÒÏÚͦÝÅÎÉÊ ÎÁ ˦ÌØËÏÈ\n"
-#~ "ËÏÍÐÁËÔ-ÄÉÓËÁÈ. íÏÖÌÉ×Ï, drakX ×ÉÂÒÁ× ÐÁËÅÔÉ, ÝÏ ÚÎÁÈÏÄÑÔØÓÑ ÎÁ ¦ÎÛÉÈ\n"
-#~ "ÄÉÓËÁÈ (צÄͦÎÎÉÈ ×¦Ä ÕÓÔÁÎÏ×ÏÞÎÏÇÏ). ëÏÌÉ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ÂÕÄÅ ÐÏÔÒ¦ÂÅÎ\n"
-#~ "¦ÎÛÉÊ ÄÉÓË, ÐÒÏÇÒÁÍÁ ×ÉÔÑÇÎÅ ÄÁÎÉÊ ËÏÍÐÁËÔ-ÄÉÓË ¦ ÐÏÐÒÏÓÉÔØ ×ÓÔÁ×ÉÔÉ\n"
-#~ "ÐÏÔÒ¦ÂÎÉÊ."
-
-#~ msgid ""
-#~ "drakX just skips this test unless you purposely click on the "
-#~ "corresponding step\n"
-#~ "on the left. By default, drakX sees your mouse as a two-button mouse and\n"
-#~ "emulates the third button, and knows whether it's PS/2, serial or USB.\n"
-#~ "\n"
-#~ "Perhaps this is not what you want. In that case, you just have to select "
-#~ "the\n"
-#~ "right type for your mouse in the list which appears.\n"
-#~ "\n"
-#~ "You can now test your mouse. Use buttons and wheel to verify if settings "
-#~ "are\n"
-#~ "good. If not, you can click on \"Cancel\" to choose another driver."
-#~ msgstr ""
-#~ "drakX ÐÒÏÓÔÏ ÐÒÏÐÕÓËÁ¤ ÃÅÊ ÔÅÓÔ, ÑËÝÏ ÷É Ñ×ÎÏ ÎÅ ×ËÁÖÅÔÅ ÎÁ ÃÅÊ ËÒÏË,\n"
-#~ "×ÉÂÒÁ×ÛÉ ÊÏÇÏ ÍÉÛËÏÀ Õ ÓÐÉÓËÕ Ì¦×ÏÒÕÞ. ÷ ÓÔÁÎÄÁÒÔÎ¦Ê ËÏÎƦ­ÕÒÁæ§,\n"
-#~ "drakX ÂÁÞÉÔØ ÍÉÛËÕ ÑË Ä×ÏÈ-ËÌÁצÛÎÕ, ¦ ÐÒÏÇÒÁÍÎÏ ÅÍÕÌÀ¤ ÔÒÅÔÀ\n"
-#~ "ËÌÁצÛÕ. ÷¦Î ÔÁËÏÖ ÚÎÁ¤, ÞÉ ÍÉÛËÁ PS/2, ÐÏÓ̦ÄÏ×ÎÁ ÞÉ USB.\n"
-#~ "\n"
-#~ "íÏÖÌÉ×Ï, ÃÅ ÎÅ ÔÅ, ÝÏ ÐÏÔÒ¦ÂÎÏ ÷ÁÍ. ÷ ÔÁËÏÍÕ ÒÁÚ¦ ÷ÁÍ ÐÒÏÓÔÏ ÐÏÔÒ¦ÂÎÏ\n"
-#~ "×ÉÂÒÁÔÉ ×¦ÒÎÉÊ ÔÉÐ Ó×Ϥ§ ÍÉÛËÉ × ÓÐÉÓËÕ, ÑËÉÊ Ú'Ñ×ÉÔØÓÑ.\n"
-#~ "\n"
-#~ "ð¦ÓÌÑ ÃØÏÇÏ ÍÏÖÅÔÅ ×ÉÐÒÏÂÕ×ÁÔÉ ÍÉÛËÕ. óËÏÒÉÓÔÁÊÔÅÓØ ËÎÏÐËÁÍÉ ÞÉ\n"
-#~ "ËÏ̦ÝÁÔËÏÍ, ÝÏ ÐÅÒÅצÒÉÔÉ, ÞÉ ×Ó¦ ÕÓÔÁÎÏ×ËÉ ×¦ÒΦ. ñËÝÏ ÃÅ ÎÅ ÔÁË,\n"
-#~ "ÎÁÔÉÓΦÔØ ÎÁ \"÷¦ÄͦÎÉÔÉ\", ¦ ÓÐÒÏÂÕÊÔÅ ¦ÎÛÉÊ ÄÒÁÊ×ÅÒ."
-
-#~ msgid "Spooler: "
-#~ msgstr "ëÅÒÕ×ÁÎÎÑ ÞÅÒÇÏÀ:"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ ÔÕÔ"
-
-#~ msgid "Press next to continue."
-#~ msgstr "îÁÔÉÓΦÔØ ÄÁ̦ ÄÌÑ ÐÒÏÄÏ×ÖÅÎÎÑ"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "÷ÉÂÅÒ¦ÔØ ÏÓÎÏ×ÎÕ ÍÏ×Õ, ÑËÕ ×É ÂÕÄÅÔÅ ×ÖÉ×ÁÔÉ ÐÒÉ ×ÓÔÁÎÏ×ÌÅÎΦ ÓÉÓÔÅÍÉ\n"
-#~ "ÔÁ ÐÒÉ ËÏÒÉÓÔÕ×ÁÎΦ ÓÉÓÔÅÍÏÀ"
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr "×ÓÔÁÎÏ×ÌÀ¤ÔÅ "
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "÷ÉÂÅÒ¦ÔØ ×¦ÄÐÏצÄÎÕ ÒÏÚËÌÁÄËÕ ËÌÁצÁÔÕÒÉ ¦Ú ÓÐÉÓËÕ"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "ñËÝÏ ×É ÈÏÞÅÔÅ, ÝÏÂ Õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ЦÓÌÑ ÕÓÔÁÎÏ×ËÉ ÂÕÌÉ ÐÒÉÓÕÔΦÍÉ\n"
-#~ "¦ÎÛ¦ ÍÏ×É (ËÒ¦Í Ôϧ, ÑËÕ ×É ×ÖÅ ×ÉÂÒÁÌÉ ÎÁ ÐÏÞÁÔËÕ ÕÓÔÁÎÏ×ËÉ),\n"
-#~ "×ÉÂÅÒ¦ÔØ §È, ÂÕÄØ-ÌÁÓËÁ, Ú ÐÏÄÁÎÏÇÏ ÓÐÉÓËÕ. ñËÝÏ ×É ÈÏÞÅÔÅ ×ÉÂÒÁÔÉ ×Ó¦\n"
-#~ "ÍÏ×É, ×É ÍÏÖÅÔÅ ÐÒÏÓÔÏ ×ÉÂÒÁÔÉ ÐÕÎËÔ \"÷Ó¦\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "÷ÉÂÅÒ¦ÔØ:\n"
-#~ "\n"
-#~ "\n"
-#~ "  - óÐÅæÁÌØÎÉÊ: ñËÝÏ ×É ÚÎÁÊÏͦ Ú ì¦ÎÁËÓÏÍ, ×É ÚÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ\n"
-#~ "    Ò¦×ÅÎØ ×ÉËÏÒÉÓÔÁÎÎÑ ×ÓÔÁÎÏ×ÌÅÎÉÈ ÐÁËÅÔ¦× ÔÁ˦, ÑË Ú×ÉÞÁÊÎÉÊ, "
-#~ "ÒÏÚÒÏÂÎÉË\n"
-#~ "    ÔÁ ÓÅÒ×ÅÒ. ÷ÉÂÅÒ¦ÔØ \"ú×ÉÞÁÊÎÉÊ\", ÄÌÑ Ú×ÉÞÁÊÎÏÇÏ ×ÉËÏÒÉÓÔÁÎÎÑ "
-#~ "ÓÉÓÔÅÍÉ,\n"
-#~ "    ÑË ÐÅÒÓÏÎÁÌØÎÉÍ ËÏÍÐ'ÀÔÅÒÏÍ. ñËÝÏ ×É ÂÕÄÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÓÉÓÔÅÍÕ "
-#~ "×\n"
-#~ "    ÏÓÎÏ×ÎÏÍÕ ÄÌÑ ÒÏÚÒÏÂËÉ, ×ÉÂÅÒ¦ÔØ \"òÏÚÒÏÂÎÉË\". áÂÏ ×ÉÂÅÒ¦ÔØ \"óÅÒ×ÅÒ"
-#~ "\",\n"
-#~ "    ÑËÝÏ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÓÅÒ×ÅÒ ÚÁÇÁÌØÎÏÇÏ ÐÒÉÚÎÁÞÅÎÎÑ (ÄÌÑ\n"
-#~ "    ÅÌÅËÔÒÏÎÎϧ ÐÏÛÔÉ, ÐÒÉÎÔ-ÓÅÒ×ÅÒ...).\n"
-#~ "\n"
-#~ "  - åËÓÐÅÒÔ: ñËÝÏ ×É ×¦ÌØÎÏ ÐÏÞÕ×Á¤ÔÅ × ÓÅÒÅÄÏ×Éݦ GNU/Linux ¦ ÈÏÞÅÔÅ\n"
-#~ "    ×ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ, ÔÁË ÑË ÷ÁÍ ÈÏÞÅÔØÓÑ - ÃÅÊ ÓÐÏӦ ÕÓÔÎÏ×ËÉ ÄÌÑ\n"
-#~ "    ÷ÁÓ. ÷É ÚÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÏÐæÀ ×ÉËÏÒÉÓÔÁÎÎÑ ÷ÁÛϧ ÓÉÓÔÅÍÉ, ÑË\n"
-#~ "    \"óÐÅæÁÌØÎÅ\"\n"
-#~ "\n"
-#~ "    áÌÅ, ØÕÄØ-ÌÁÓËÁ, îå ÷éâéòáêôå ïóôáîî¶ê òåöéí, ëò¶í ôïçï ÷éðáäëõ,\n"
-#~ "    ñëýï ÷é óðòá÷ä¶ òïúõí¶´ôåóø îá ôïíõ, ýï ÷é òïâéôå.  "
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "ò¦ÚΦ ×ÁÒ¦ÁÎÔÉ ÄÌÑ ËÏÒÉÓÔÕ×ÁÎÎÑ ÷ÁÛÏÀ ÓÉÓÔÅÍÏÀ (ÑËÝÏ ×É ×ÉÂÒÁÌÉ ËÌÁÓ\n"
-#~ "ÕÓÔÁÎÏ×ËÉ \"óÐÅæÁÌØÎÉÊ\" ÁÂÏ \"åËÓÐÅÒÔ\") ÔÁ˦:\n"
-#~ "\n"
-#~ "  - òÏÂÏÞÁ ÓÔÁÎæÑ: ×ÉÂÅÒ¦ÔØ ÃÅ, ÑËÝÏ ×É ÚÂÉÒÁ¤ÔÅÓØ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÷ÁÛÕ\n"
-#~ "    ÍÁÛÉÎÕ × ÏÓÔÎÏ×ÎÏÍÕ ÄÌÑ ÝÏÄÅÎÎϧ ÒÏÂÏÔÉ (ÏƦÓÎÁ ÒÏÂÏÔÁ, ÏÂÒÏÂËÁ\n"
-#~ "    ÇÒÁƦËÉ ÔÏÝÏ). îÅ ÞÅËÁÊÔÅ, ÝÏ ÂÕÄÕÔØ ×ÓÔÁÎÏ×ÌÅΦ Ñ˦-ÎÅÂÕÄØ\n"
-#~ "    ËÏÍЦÌÑÔÏÒÉ, ÐÒÏÇÒÁÍÉ ÒÏÚÒÏÂËÉ, ÔÏÝÏ.\n"
-#~ "\n"
-#~ "  - òÏÚÒÏÂËÁ: ÓÁÍÁ ÎÁÚ×Á ËÁÖÅ ÚÁ ÓÅÂÅ. ÷ÉÂÅÒ¦ÔØ ÃÅÊ ×ÁÒ¦ÁÎÔ, ÑËÝÏ ÷É\n"
-#~ "    ÚÂÉÒÁ¤ÔÅÓØ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ Ó×ÏÀ ÍÁÛÉÎÕ × ÏÓÎÏ×ÎÏÍÕ ÄÌÑ ÒÏÚÒÏÂËÉ\n"
-#~ "    ÐÒÏÇÒÁÍÎÏÇÏ ÚÁÂÅÚÐÅÞÅÎÎÑ. ÷ ÃØÏÍÕ ×ÉÐÁÄËÕ ×É ÏÔÒÉÍÁ¤ÔÅ ÐÏ×ÎÉÊ "
-#~ "ËÏÍÐÌÅËÔ\n"
-#~ "    ÐÒÏÇÒÁÍ ÄÌÑ ËÏÍЦÌÑæ§, צÄÌÁÄËÉ ÔÁ ÆÏÒÍÁÔÕ×ÁÎÎÑ ×ÉȦÄÎÉÈ ÔÅËÓÔ¦×, "
-#~ "ÔÁ\n"
-#~ "    ÄÌÑ ÓÔ×ÏÒÅÎÎÑ ÐÒÏÇÒÁÍÎÉÈ ÐÁËÅÔ¦×.  \n"
-#~ "\n"
-#~ "  - óÅÒ×ÅÒ: ñËÝÏ ×É ÚÂÉÒÁ¤ÔÅÓØ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÍÁÛÉÎÕ, ÎÁ ÑË¦Ê ÷É\n"
-#~ "    ×ÓÔÁÎÏ×ÌÀ¤ÔÅ Mandrake ì¦ÎÁËÓ, ÑË ÓÅÒ×ÅÒ. áÂÏ ÑË ÆÁÊÌ ÓÅÒ×ÅÒ (NFS ÁÂÏ\n"
-#~ "    SMB), ÓÅÒ×ÅÒ ÐÒÉÎÔÅÒÁ (ÔÉÐÕ àΦËÓ lp ÁÂÏ ÔÉÐÕ Windows SMB ÐÒÉÎÔÅÒÁ),\n"
-#~ "    ÑË ÓÅÒ×ÅÒ ÁÕÔÅÎÔÉËÁæ§ (NIS), ÓÅÒ×ÅÒ ÂÁÚÉ ÄÁÎÉÈ, ÔÏÝÏ. ïÔÖÅ, ÎÅ\n"
-#~ "    ÞÅËÁÊÔÅ, ÝÏ Ñ˦ÓØ ÐÒÉÍÏÞËÉ (ÔÉÐÕ KDE, GNOME...) ÂÕÄÕÔØ ×ÓÔÁÎÏ×ÌÅΦ."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ×É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÇÒÕÐÕ ÐÁËÅÔ¦×, Ñ˦ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÞÉ\n"
-#~ "ÐÏÎÏ×ÉÔÉ.\n"
-#~ "\n"
-#~ "DrakX ÐÏÔ¦Í ÐÅÒÅצÒÉÔØ, ÞÉ ÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ Í¦ÓÃÑ ÎÁ ÷ÁÛÏÍÕ\n"
-#~ "ËÏÍÐ'ÀÔÅÒ¦ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ÃÉÈ ÐÁËÅÔ¦×. ñËÝÏ Í¦ÓÃÑ ÎÅÄÏÓÔÁÔÎØÏ, צÎ\n"
-#~ "ÐÏÐÅÒÅÄÉÔØ ÷ÁÓ ÐÒÏ ÃÅ. ñËÝÏ ×É ×ÓÅ-ÔÁËÉ ÈÏÞÅÔÅ ÐÒÏÄÏ×ÖÕ×ÁÔÉ, צΠÐÏÞÎÅ\n"
-#~ "ÕÓÔÁÎÏ×ËÕ ×ÉÂÒÁÎÉÈ ÇÒÕÐ ÐÁËÅÔ¦×, ÁÌÅ ÐÒÏÐÕÓÔÉÔØ ÄÅÑ˦ ÍÅÎÛ ×ÁÖÌÉצ\n"
-#~ "ÐÁËÅÔÉ. ÷ÎÉÚÕ ÓÐÉÓËÕ ×É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÏÐæÀ \"¶ÎÄÉצÄÕÁÌØÎÉÊ ×ɦÒ\n"
-#~ "ÐÁËÅÔ¦×\". ÷ ÃØÏÍÕ ×ÉÐÁÄËÕ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ÐÅÒÅÇÌÑÄÁÔÉ ÓÐÉÓÏË ¦Ú\n"
-#~ "¦ÌØÛ, Î¦Ö 1000 ÐÁËÅÔ¦×..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "úÁÒÁÚ ×É ¦ÎÄÉצÄÕÁÌØÎÏ ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÐÁËÅÔÉ, Ñ˦ ×É ÂÁÖÁÌÉ Â\n"
-#~ "×ÓÔÁÎÏ×ÉÔÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "÷É ÍÏÖÅÔÅ ÒÏÚÇÏÒÎÕÔÉ ÞÉ ÚÇÏÒÎÕÔÉ ÄÅÒÅ×Ï ÐÁËÅÔ¦×, ÑËÝÏ ËÌÁÃÎÅÔÅ ÎÁ\n"
-#~ "ÐÁÒÁÍÅÔÒÁÈ × Ì¦×ÏÍÕ ËÕÔËÕ ×¦ËÎÁ Ú ÐÁËÅÔÁÍÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ñËÝÏ ×É ÈÏÞÅÔŠצÄÓÏÒÔÕ×ÁÔÉ ÐÁËÅÔÉ × ÁÌÆÁצÔÎÏÍÕ ÐÏÒÑÄËÕ, ËÌÁÃΦÔØ ÎÁ\n"
-#~ "ЦËÔÏÇÒÁÍæ \"ðÅÒÅÍÉËÎÕÔÉ ÓÏÒÔÕ×ÁÎÎÑ ÐÏ ÇÒÕÐÁÍ/ÂÅÚ ÇÒÕÐ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "ñËÝÏ ×É ÈÏÞÅÔÅ ÐÏÚÂÕÔÉÓÑ ÐÏÐÅÒÅÄÖÅÎØ ÐÒÏ ÎÅ×ÉËÏÎÁÎÎÑ ×ÚÁ¤ÍÏÚÁÌÅÖÎÏÓÔÅÊ\n"
-#~ "ÐÁËÅÔ¦×, ËÌÁÃΦÔØ ÎÁ \"á×ÔÏÍÁÔÉÞΦ ÚÁÌÅÖÎÏÓÔ¦\". úÁÕ×ÁÖÔÅ ÏÄÎÁË, ÝÏ ËÏÌÉ\n"
-#~ "×É ×ÉÂÅÒÅÔÅ ÃÅÊ ÒÅÖÉÍ, ÐÒÉ ×¦ÄͦΦ ×ÉÂÏÒÕ ÑËÏÇÏÓØ ÐÁËÅÔÕ ÍÏ×ÞËÉ ÍÏÖÅ\n"
-#~ "ÚÎÑÔÉÓÑ ×¦ÄͦÎÁ ÔÁËÏÖ ¦Ú ÐÁËÅÔ¦×, ×¦Ä ÑËÉÈ ×¦Î ÚÁÌÅÖÉÔØ."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "ñËÝÏ ×É ÍÁ¤ÔÅ ×Ó¦ ËÏÍÐÁËÔ-ÄÉÓËÉ Ú ÐÏÄÁÎÉÈ ×ÉÝÅ, ÎÁÔÉÓΦÔØ ÎÁ \"çÁÒÁÚÄ\".\n"
-#~ "ñËÝÏ ×É ÎÅ ÍÁ¤ÔÅ ÖÏÄÎÏÇÏ, ÎÁÔÉÓΦÔØ ÎÁ \"÷¦ÄͦÎÉÔÉ\".  ñËÝÏ Ô¦ÌØËÉ\n"
-#~ "ÄÅÑËÉÈ ËÏÍÐÁËÔ-ÄÉÓË¦× ÎÅ ×ÉÓÔÁÞÁ¤, צÄͦΦÔØ §È ×ɦÒ, ¦ ÎÁÔÉÓΦÔØ\n"
-#~ "\"çÁÒÁÚÄ\" ЦÓÌÑ ÃØÏÇÏ."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "ñËÝÏ ×É ÈÏÞÅÔŠЦÄËÌÀÞÉÔÉ Ó×¦Ê ËÏÍÐ'ÀÔÅÒÁ ÄÏ ¶ÎÔÅÒÎÅÔÕ ÁÂÏ ÄÏ\n"
-#~ "ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦, ×ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, צÄÐÏצÄÎÕ ÕÓÔÁÎÏ×ËÕ. ðÅÒÛ,\n"
-#~ "Î¦Ö ×ÉÂÉÒÁÔÉ ÔÕ ÞÉ ¦ÎÛÕ ÕÓÔÁÎÏ×ËÕ, ×צÍËΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÓÁÍ ÐÒÉÓÔÒ¦Ê\n"
-#~ "ÄÌÑ ÔÏÇÏ, ÝÏ DrakX Í¦Ç ×ÉÚÎÁÞÉÔÉ ÊÏÇÏ Á×ÔÏÍÁÔÉÞÎÏ.\n"
-#~ "\n"
-#~ "ñËÝÏ ×É ÎÅ ÍÁ¤ÔŠΦ Ú'¤ÄÎÁÎÎÑ Ú ¶ÎÔÅÒÎÅÔÏÍ, Φ Ú ÌÏËÁÌØÎÏÀ ÍÅÒÅÖÅÀ, "
-#~ "×ÉÂÒÅÒ¦ÔØ ÕÓÔÁÎÏ×ËÕ \"úÁÂÏÒÏÎÉÔÉ ÍÅÒÅÖÕ\".\n"
-#~ "\n"
-#~ "ñËÝÏ ×É ÚÁÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ËÏÎƦ­ÕÒÁæÀ ÍÅÒÅÖ¦ ЦÚΦÛŠЦÓÌÑ ÔÏÇÏ, ÑË\n"
-#~ "ÕÓÔÁÎÏ×ËÁ ÓÉÓÔÅÍÉ ÚÁ˦ÎÞÅÎÁ, ÁÂÏ ÑËÝÏ ×É ×ÖÅ ÚÁ˦ÎÞÉÌÉ ËÏÎƦ­ÕÒÁæÀ\n"
-#~ "ÍÅÒÅÖ¦, ÎÁÔÉÓΦÔØ \"úÁ˦ÎÞÅÎÏ\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "îÅ ÚÎÁÊÄÅÎÏ ÍÏÄÅÍÁ. ÷ËÁÖ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÐÏÓ̦ÄÏ×ÎÉÊ ÐÏÒÔ, ÄÏ ÑËÏÇÏ\n"
-#~ "ÊÏÇÏ Ð¦ÄËÌÀÞÅÎÏ. \n"
-#~ "\n"
-#~ "äÌÑ ÄÏצÄËÉ: ÐÅÒÛÉÊ ÐÏÓ̦ÄÏ×ÎÉÊ ÐÏÒÔ (ÑËÉÊ Ú×ÅÔØÓÑ \"COM1\" × ÓÉÓÔÅͦ\n"
-#~ "Microsoft Windows) ÍÁ¤ ÎÁÚ×Õ \"ttyS0\" × ì¦ÎÁËÓ¦."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "÷É ÍÏÖÅÔÅ ÔÅÐÅÒ ××ÅÓÔÉ ÐÏÔÒ¦ÂΦ ÐÁÒÁÍÅÔÒÉ ÄÌÑ ÄÏÚ×ÏÎÕ ÄÏ ¶ÎÔÅÒÎÅÔ\n"
-#~ "ÐÒÏ×ÁÊÄÅÒÁ. ñËÝÏ ×É ÎÅ ÚÎÁ¤ÔÅ, ÞÉ ÎÅ ÐÅ×Φ × ÔÏÍÕ, Ñ˦ ÓÁÍÅ ÐÁÒÁÍÅÔÒÉ\n"
-#~ "ÔÒÅÂÁ ××ÏÄÉÔÉ, ×É ÚÍÏÖÅÔÅ ÏÔÒÉÍÁÔÉ §È ×¦Ä ÐÒÏ×ÁÊÄÅÒÁ. ñËÝÏ ×É ÎÅ\n"
-#~ "××ÅÄÅÔÅ ÔÕÔ ÎÁÚ×Õ ÓÅÒ×ÅÒÁ DNS (ÓÅÒ×ÅÒÁ ¦ÍÅÎ), ÊÏÇÏ ÎÁÚ×Á ÍÏÖÅ ÂÕÔÉ\n"
-#~ "ÏÔÒÉÍÁÎÁ ×¦Ä ÓÁÍÏÇÏ ÓÅÒ×ÅÒÁ Ð¦Ä ÞÁÓ Ð¦ÄËÌÀÞÅÎÎÑ ÄÏ ¶ÎÔÅÒÎÅÔÕ."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "ñËÝÏ ×É ÍÁ¤ÔÅ ÚÏ×ΦÛÎ¦Ê ÍÏÄÅÍ, ×ÍÉËΦÔØ ÊÏÇÏ ÚÁÒÁÚ, ÂÕÄØ-ÌÁÓËÁ, ÄÌÑ\n"
-#~ "ÔÏÇÏ ÝÏ DrakX Í¦Ç ÒÏÚЦÚÎÁÔÉ ÊÏÇÏ Á×ÔÏÍÁÔÉÞÎÏ."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "÷ÍÉËΦÔØ, ÂÕÄØ-ÌÁÓËÁ, Ó×¦Ê ÍÏÄÅÍ ÔÁ ×ÉÂÅÒ¦ÔØ ÊÏÇÏ ÔÉÐ."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "ñËÝÏ ×É ÎÅ ×ÐÅ×ÎÅΦ, ÝÏ ¦ÎÆÏÒÍÁÃ¦Ñ ÐÏÄÁÎÁ ×ÉÝÅ ËÏÒÅËÔÎÁ, ÁÂÏ ×É ÎÅ\n"
-#~ "×ÐÅ×ÎÅΦ, ÝÏ ÓÁÍÅ ÔÒÅÂÁ ××ÏÄÉÔÉ ÔÕÔ, ×É ÚÍÏÖÅÔÅ ÏÔÒÉÍÁÔÉ ÐÏÔÒ¦ÂÎÕ\n"
-#~ "¦ÎÆÏÒÍÁæÀ ×¦Ä Ó×ÏÇÏ ÐÒÏ×ÁÊÄÅÒÁ ¶ÎÔÅÒÎÅÔ-ÐÏÓÌÕÇ. ñËÝÏ ×É ÎÅ ××ÅÄÅÔÅ\n"
-#~ "ÔÕÔ ÎÁÚ×Õ ÓÅÒ×ÅÒÁ DNS (ÓÅÒ×ÅÒÁ ¦ÍÅÎ), ÊÏÇÏ ÎÁÚ×Á ÍÏÖÅ ÂÕÔÉ ÏÔÒÉÍÁÎÁ\n"
-#~ "×¦Ä ÓÁÍÏÇÏ ÓÅÒ×ÅÒÁ Ð¦Ä ÞÁÓ Ð¦ÄËÌÀÞÅÎÎÑ ÄÏ ¶ÎÔÅÒÎÅÔÕ."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ×É ÍÏÖÅÔÅ ××ÅÓÔÉ ÎÁÚ×Õ ÈÏÓÔÁ, ÑËÝÏ ÐÏÔÒ¦ÂÎÏ. ñËÝÏ ÷É\n"
-#~ "ÓÕÍΦ×Á¤ÔÅÓØ, ÝÏ ÔÕÔ ÔÒÅÂÁ ××ÏÄÉÔÉ, ÃÑ ¦ÎÆÏÒÍÁÃ¦Ñ ÍÏÖÅ ÂÕÔÉ ÏÔÒÉÍÁÎÁ\n"
-#~ "×¦Ä ×ÁÛÏÇÏ ¶ÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ×É ÍÏÖÅÔÅ ÎÁÓÔÒÏϧÔÉ ÐÒÉÓÔÒ¦Ê ÍÅÒÅÖ¦.\n"
-#~ "\n"
-#~ "  * IP-ÁÄÒÅÓÁ: ÑËÝÏ ×É ÎÅ ÚÎÁ¤ÔÅ ÑËÁ ×ÏÎÁ, ÚÁÐÉÔÁÊÔÅ Õ ÷ÁÛÏÇÏ\n"
-#~ "ÁÄͦΦÓÔÒÁÔÏÒÁ ÍÅÒÅÖ¦ ÁÂÏ ¦ÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ. ÷É ÎÅ ÐÏ×ÉÎΦ ××ÏÄÉÔÉ\n"
-#~ "IP-ÁÄÒÅÓÕ, ÑËÝÏ ×É ×ÉÂÅÒÅÔÅ ÐÁÒÁÍÅÔÒ \"á×ÔÏÍÁÔÉÞÎÉÊ ×ÉÂ¦Ò IP\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  * íÁÓËÁ ÍÅÒÅÖ¦: × ÚÁÇÁÌØÎÏÍÕ ×ÉÐÁÄËÕ \"255.255.255.0\" ¤ ÎÅÐÏÇÁÎÉÍ\n"
-#~ "×ÉÂÏÒÏÍ. ñËÝÏ ×É ÓÕÍΦ×Á¤ÔÅÓØ, ÓÐÉÔÁÊÔÅ Õ ÁÄͦΦÓÔÒÁÔÏÒÁ ÍÅÒÅÖ¦ ÁÂÏ\n"
-#~ "¦ÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * á×ÔÏÍÁÔÉÞÎÉÊ ×ÉÂ¦Ò IP: ÷ÉÂÅÒ¦ÔØ ÃÅÊ ÐÕÎËÔ, ÑËÝÏ ÷ÁÛÁ ÍÅÒÅÖÁ\n"
-#~ "×ÉËÏÒÉÓÔÏ×Õ¤ ÐÒÏÔÏËÏÌ DHCP ÁÂÏ BOOTP. ñËÝÏ ÃÅÊ ÐÕÎËÔ ×ÉÂÒÁÎÏ, ÷ÁÍ ÎÅ\n"
-#~ "ÐÏÔÒ¦ÂÎÏ ÚÁÐÉÓÕ×ÁÔÉ Î¦ÞÏÇÏ × ÐÏ̦ \"IP ÁÄÒÅÓÁ\". ñËÝÏ ×É ÓÕÍΦ×Á¤ÔÅÓØ,\n"
-#~ "ÓÐÉÔÁÊÔÅ Õ ÁÄͦΦÓÔÒÁÔÏÒÁ ÍÅÒÅÖ¦."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "ñËÝÏ ÐÏÔÒ¦ÂÎÏ ×É ÍÏÖÅÔÅ ××ÅÓÔÉ ÔÕÔ ÎÁÚ×Õ ÓÉÓÔÅÍÉ. ñËÝÏ ×É ÎÅ ÚÎÁ¤ÔÅ,\n"
-#~ "ÓÐÉÔÁÊÔÅ Õ Ó×ÏÇÏ ÁÄͦΦÓÔÒÁÔÏÒÁ ÍÅÒÅÖ¦."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "ôÕÔ ×É ÍÏÖÅÔÅ ××ÅÓÔÉ ÎÁÚ×Õ ÈÏÓÔÁ. ñËÝÏ ×É ÎÅ ÚÎÁ¤ÔÅ, ÞÉ ÎÅ ×ÐÅ×ÎÅΦ,\n"
-#~ "ÝÏ ÔÕÔ ÔÒÅÂÁ ××ÏÄÉÔÉ, ÚÁÌÉÛÔÅ ÃÅ ÐÏÌÅ ÐÕÓÔÉÍ. "
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ×É ÍÏÖÅÔÅ ××ÅÓÔÉ ÐÁÒÁÍÅÔÒÉ ÄÌÑ Ú'¤ÄÎÁÎÎÑ ÐÏ ÍÏÄÅÍÕ. ñËÝÏ ÷É\n"
-#~ "ÓÕÍΦ×Á¤ÔÅÓØ, ÝÏ ÔÕÔ ÔÒÅÂÁ ××ÏÄÉÔÉ, ÃÑ ¦ÎÆÏÒÍÁÃ¦Ñ ÍÏÖÅ ÂÕÔÉ ÏÔÒÉÍÁÎÁ\n"
-#~ "×¦Ä ×ÁÛÏÇÏ ¶ÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "ñËÝÏ ×É ÂÕÄÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÐÒÏËÓ¦, ÂÕÄØ-ÌÁÓËÁ, ÓËÏÎƦ­ÕÒÕÊÔÅ §È\n"
-#~ "ÔÕÔ. ñËÝÏ ×É ÎÅ ÚÎÁ¤ÔÅ, ÞÉ ×É ÂÕÄÅÔÅ ÎÉÍÉ ËÏÒÉÓÔÕ×ÁÔÉÓÑ, ĦÚÎÁÊÔÅÓÑ\n"
-#~ "ÐÒÏ ÃÅ Õ ÷ÁÛÏÇÏ ÁÄӦΦÓÔÒÁÔÏÒÁ ÍÅÒÅÖ¦, ÁÂÏ Õ ¶ÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "ñËÝÏ ÷ÁÛÅ Ú'¤ÄÎÁÎÎÑ Ú ¶ÎÔÅÒÎÅÔÏÍ ×ÓÔÁÎÏ×ÌÅÎÏ ËÏÒÅËÔÎÏ, ×É ÍÏÖÅÔÅ\n"
-#~ "×ÓÔÁÎÏ×ÉÔÉ ÐÁËÅÔ ÄÌÑ ËÒÉÐÔÏÇÒÁƦ§. óÐÏÞÁÔËÕ ×ÉÂÅÒ¦ÔØ ÓÅÒ×ÅÒ\n"
-#~ "(ÄÚÅÒËÁÌÏ), Ú ÑËÏÇÏ ×É ÈÏÞÅÔÅ Ú×ÁÎÔÁÖÉÔÉ ÐÁËÅÔÉ, Á ÐÏÔ¦Í ×ÉÂÅÒ¦ÔØ\n"
-#~ "ÐÁËÅÔÉ, Ñ˦ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ.\n"
-#~ "\n"
-#~ "úÁ××ÁÖÔÅ, ÝÏ ×É ÍÁ¤ÔÅ ×ÉÂÒÁÔÉ ÓÅÒ×ÅÒÉ ÔÁ ÐÁËÅÔÉ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ×\n"
-#~ "ÚÁÌÅÖÎÏÓÔ¦ ×¦Ä ÚÁËÏÎÏÄÁ×ÓÔ×Á ÷ÁÛϧ ËÒÁ§ÎÉ."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr ""
-#~ "÷¦ÄÐÏצÄÎÏ ÄÏ Í¦ÓÃÑ ÄÅ ×É ÖÉ×ÅÔÅ, ×É ÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÞÁÓÏ×ÉÊ ÐÏÑÓ."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "÷É ÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÌÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ (ÑËÉÊ ÂÅÚÐÏÓÅÒÅÄÎØÏ Ú'¤ÄÎÁÎÉÊ Ú\n"
-#~ "÷ÁÛÉÍ ËÏÍÐ'ÀÔÅÒÏÍ) ÁÂÏ ×¦ÄÄÁÌÅÎÉÊ ÐÒÉÎÔÅÒ (ÑËÉÊ ÄÏÓÔÕÐÎÉÊ ÞÅÒÅÚ ÍÅÒÅÖÕ\n"
-#~ "Unix, Netware ÞÉ Microsoft Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "ñËÝÏ ×É ÚÂÉÒÁ¤ÔÅÓØ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÐÒÉÎÔÅÒÁÍÉ Ú ÷ÁÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ, ÷É\n"
-#~ "ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÓÉÓÔÅÍÕ ÄÒÕËÕ Í¦Ö CUPS ÞÉ LPR.\n"
-#~ "\n"
-#~ "CUPS - ÃÅ ÎÏ×Á, ÐÏÔÕÖÎÁ ÔÁ ÇÎÕÞËÁ ÓÉÓÔÅÍÁ ÄÒÕËÕ ÄÌÑ ÓÉÓÔÅÍ, ÝÏ\n"
-#~ "ÐÒÁÃÀÀÔØ Ú àΦËÓÏÍ (CUPS ÏÚÎÁÞÁ¤ óЦÌØÎÁ óÉÓÔÅÍÁ äÒÕËÕ ÄÌÑ àΦËÓÕ -\n"
-#~ "Common Unix Printing System). ãÅ - ÓÔÁÎÄÁÒÔÎÁ ÓÉÓÔÅÍÁ ÄÒÕËÕ ÄÌÑ\n"
-#~ "íÁÎÄÒÅÊË ì¦ÎÁËÓÕ.\n"
-#~ "\n"
-#~ "LPR - ÃÅ ÓÔÁÒÁ ÓÉÓÔÅÍÁ ÄÒÕËÕ, ÑËÁ ×ÉËÏÒÉÓÔÏ×Õ×ÁÌÁÓÑ × ÐÏÐÅÒÅÄΦÈ\n"
-#~ "×ÅÒÓ¦ÑÈ íÁÎÄÒÅÊË ì¦ÎÁËÓÁ.\n"
-#~ "\n"
-#~ "ñËÝÏ ÷ÁÍ ÎÅ ÐÏÔÒ¦ÂÎÏ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÐÒÉÎÔÅÒ, ËÌÁÃΦÔØ ÎÁ \"î¦ÞÏÇÏ\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú ÂÁÇÁÔØÍÁ ÔÉÐÁÍÉ ÐÒÉÎÔÅÒ¦×. ëÏÖÅÎ Ú ÃÉÈ\n"
-#~ "ÔÉÐ¦× ×ÉÍÁÇÁ¤ ÏËÒÅÍϧ ÕÓÔÁÎÏ×ËÉ.\n"
-#~ "\n"
-#~ "ñËÝÏ ÐÒÉÎÔÅÒ Æ¦ÚÉÞÎÏ Ð¦ÄËÌÀÞÅÎÉÊ ÄÏ ÷ÁÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ, ×ÉÂÅÒ¦ÔØ "
-#~ "\"ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ\".\n"
-#~ "\n"
-#~ "ñËÝÏ ×É ÈÏÞÅÔÅ ÄÒÕËÕ×ÁÔÉ ÎÁ ÐÒÉÎÔÅÒ¦, ÑËÉÊ Ð¦Ä'¤ÄÎÁÎÉÊ ÞÅÒÅÚ ÍÅÒÅÖÕ ÄÏ\n"
-#~ "¦ÎÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ Ú ÓÉÓÔÅÍÏÀ àΦËÓ, ×ÉÂÅÒ¦ÔØ \"÷¦ÄÄÁÌÅÎÉÊ ÐÒÉÎÔÅÒ\".\n"
-#~ "\n"
-#~ "ñËÝÏ ×É ÈÏÞÅÔÅ ÄÒÕËÕ×ÁÔÉ ÎÁ ÐÒÉÎÔÅÒ¦, ÑËÉÊ Ð¦ÄËÌÀÞÅÎÉÊ ÄÏ ËÏÍÐ'ÀÔÅÒÁ Ú\n"
-#~ "ÓÉÓÔÅÍÏÀMicrosoft Windows (ÁÂÏ ÎÁ ÍÁÛÉΦ Ú àΦËÓÏÍ, ÑËÁ ËÏÒÉÓÔÕ¤ÔØÓÑ\n"
-#~ "ÐÒÏÔÏËÏÌÏÍ SMB), ×ÉÂÅÒ¦ÔØ \"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "ðÅÒÛ, Î¦Ö ÐÒÏÄÏ×ÖÕ×ÁÔÉ ×ÍÉËΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÐÒÉÎÔÅÒ ÝÏ ÄÁÔÉ\n"
-#~ "ÍÏÖÌÉצÓÔØ DrakX צÒÎÏ ×ÉÚÎÁÞÉÔÉ ÊÏÇÏ ÔÉÐ.\n"
-#~ "\n"
-#~ "÷É ÍÁ¤ÔÅ ××ÅÓÔÉ ÄÅÑËÕ ¦ÎÆÏÒÍÁæÀ ÔÕÔ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * îÁÚ×Á ÐÒÉÎÔÅÒÁ: ÐÒÏÇÒÁÍÁ ÄÒÕËÕ ËÏÒÉÓÔÕ¤ÔØÓÑ ÎÁÚ×ÏÀ \"lp\", ËÏÌÉ ÎÅ\n"
-#~ "    ×ÓÔÁÎÏ×ÌÅΦ ¦ÎÛ¦ ÎÁÚ×É. ïÔÖÅ, ×É ÐÏ×ÉÎΦ ÍÁÔÉ ÐÒÉÎÔÅÒ Ú ÎÁÚ×ÏÀ \"lp\" "
-#~ "×\n"
-#~ "    Ó×Ï§Ê ÓÉÓÔÅͦ. ñËÝÏ ×É ÍÁ¤ÔÅ Ô¦ÌØËÉ ÏÄÉÎ ÐÒÉÎÔÅÒ, ×É ÍÏÖÅÔÅ ÍÁÔÉ\n"
-#~ "    ˦ÌØËÁ Ò¦ÚÎÉÈ ÎÁÚ× (ÐÓÅ×Ä) ÄÌÑ ÎØÏÇÏ. ¶ÍÅÎÁ Ô¦ÌØËÉ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ\n"
-#~ "    ÒÏÚĦÌÉÔÉ Í¦Ö ÓÏÂÏÀ ÓÉÍ×ÏÌÏÍ ËÁÎÁÌÕ (\"|\"). ïÔÖÅ, ÑËÝÏ ×É ×¦ÄÄÁ¤ÔÅ\n"
-#~ "    ÐÅÒÅ×ÁÇÕ Ñ˦ÊÓØ Â¦ÌØÛ ÏÓÍÉÓÌÅÎ¦Ê ÎÁÚצ, ×É ÍÁ¤ÔÅ ×ËÁÚÁÔÉ §§ ÐÅÒÛÏÀ,\n"
-#~ "    ÔÏÂÔÏ: \"í¦Ê ÐÒÉÎÔÅÒ|lp\".\n"
-#~ "\n"
-#~ "  * ïÐÉÓ: ÃÅ ÎÅÏÂÏ×'ÚËÏ×Å ÐÏÌÅ, ÁÌÅ ËÏÒÉÓÎÏ ÊÏÇÏ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ, ÑËÝÏ\n"
-#~ "    ×É ÍÁ¤ÔŠ˦ÌØËÁ ÐÒÉÎÔÅÒ¦× Ð¦Ä'¤ÄÎÁÎÉÈ ÄÏ ËÏÍÐ'ÀÔÅÒÁ, ÁÂÏ ÑËÝÏ ÷É\n"
-#~ "    ÈÏÞÅÔÅ ÄÏÚ×ÏÌÉÔÉ ÄÏÓÔÕÐ ¦ÎÛÉÍ ËÏÍÐ'ÀÔÅÒÁÍ ÄÏ ÃØÏÇÏ ÐÒÉÎÔÅÒÁ.\n"
-#~ "\n"
-#~ "  * òÏÚÔÁÛÕ×ÁÎÎÑ: ÑËÝÏ ×É ÈÏÞÅÔÅ ×ËÁÚÁÔÉ, ÄŠƦÚÉÞÎÏ ÚÎÁÈÏÄÉÔØÓÑ ÷ÁÛ\n"
-#~ "    ÐÒÉÎÔÅÒ, ÚÁÐÉÛ¦ÔØ ÃÅ ÔÕÔ (ÍÏÖÅÔÅ ÚÁÐÉÓÕ×ÁÔÉ ÔÕÔ, ÝÏ ÚÁ×ÇÏÄÎÏ Õ "
-#~ "צÌØΦÊ\n"
-#~ "    ÆÏÒͦ. îÁÐÒÉËÌÁÄ, \"2Ê ÐÏ×ÅÒÈ\".\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "÷ÁÍ ÐÏÔÒ¦ÂÎÏ ××ÅÓÔÉ ÄÅÑ˦ ÄÁΦ ÔÕÔ.\n"
-#~ "\n"
-#~ "  * îÁÚ×Á ÞÅÒÇÉ ÄÒÕËÕ: ÐÒÏÇÒÁÍÁ ÄÒÕËÕ ËÏÒÉÓÔÕ¤ÔØÓÑ ÎÁÚ×ÏÀ \"lp\", ËÏÌÉ "
-#~ "ÎÅ\n"
-#~ "    ×ÓÔÁÎÏ×ÌÅΦ ¦ÎÛ¦ ÎÁÚ×É. ïÔÖÅ, ×É ÐÏ×ÉÎΦ ÍÁÔÉ ÐÒÉÎÔÅÒ Ú ÎÁÚ×ÏÀ \"lp\" "
-#~ "×\n"
-#~ "    Ó×Ï§Ê ÓÉÓÔÅͦ. ñËÝÏ ×É ÍÁ¤ÔÅ Ô¦ÌØËÉ ÏÄÉÎ ÐÒÉÎÔÅÒ, ×É ÍÏÖÅÔÅ ÍÁÔÉ\n"
-#~ "    ˦ÌØËÁ Ò¦ÚÎÉÈ ÎÁÚ× (ÐÓÅ×Ä) ÄÌÑ ÎØÏÇÏ. ¶ÍÅÎÁ Ô¦ÌØËÉ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ\n"
-#~ "    ÒÏÚĦÌÉÔÉ Í¦Ö ÓÏÂÏÀ ÓÉÍ×ÏÌÏÍ ËÁÎÁÌÕ (\"|\"). ïÔÖÅ, ÑËÝÏ ×É ×¦ÄÄÁ¤ÔÅ\n"
-#~ "    ÐÅÒÅ×ÁÇÕ Ñ˦ÊÓØ Â¦ÌØÛ ÏÓÍÉÓÌÅÎ¦Ê ÎÁÚצ, ×É ÍÁ¤ÔÅ ×ËÁÚÁÔÉ §§ ÐÅÒÛÏÀ,\n"
-#~ "    ÔÏÂÔÏ: \"í¦Ê ÐÒÉÎÔÅÒ|lp\".\n"
-#~ "\n"
-#~ "  * ëÁÔÁÌÏÇ ÞÅÒÇÉ ÄÒÕËÕ: × ÃØÏÍÕ ËÁÔÁÌÏÚ¦ ÂÕÄÕÔØ ÔÉÍÞÁÓÏ×Ï ÚÂÅÒ¦ÇÁÔÉÓÑ\n"
-#~ "    ÒÏÂÏÔÉ, ÐÅÒÅÄÁΦ ÎÁ ÄÒÕË. îÅ ÚͦÎÀÊÔÅ ÓÔÁÎÄÁÒÔÎÅ ÚÎÁÞÅÎÎÑ ÃØÏÇÏ\n"
-#~ "    ÐÁÒÁÍÅÔÒÕ, ÑËÝÏ ×É ÎÅ ×ÐÅ×ÎÅΦ × Ó×Ï§È Ä¦ÑÈ. \n"
-#~ "\n"
-#~ "  * ú'¤ÄÎÁÎÎÑ Ú ÐÒÉÎÔÅÒÏÍ: ÑËÝÏ ÐÒÉÎÔÅÒ Æ¦ÚÉÞÎÏ Ú'¤ÄÎÁÎÉÊ Ú\n"
-#~ "    ËÏÍÐ'ÀÔÅÒÏÍ, ×ÉÂÅÒ¦ÔØ \"ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ\". \n"
-#~ "    ñËÝÏ ×É ÈÏÞÅÔÅ ÄÒÕËÕ×ÁÔÉ ÎÁ ÐÒÉÎÔÅÒ¦, ÑËÉÊ Ð¦Ä'¤ÄÎÁÎÉÊ ÞÅÒÅÚ\n"
-#~ "    ÍÅÒÅÖÕ ÄÏ ¦ÎÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ Ú ÓÉÓÔÅÍÏÀ àΦËÓ, ×ÉÂÅÒ¦ÔØ \"÷¦ÄÄÁÌÅÎÉÊ\n"
-#~ "    ÐÒÉÎÔÅÒ\".\n"
-#~ "\n"
-#~ "    ñËÝÏ ×É ÈÏÞÅÔÅ ÄÒÕËÕ×ÁÔÉ ÎÁ ÐÒÉÎÔÅÒ¦, ÑËÉÊ Ð¦ÄËÌÀÞÅÎÉÊ ÄÏ ËÏÍÐ'ÀÔÅÒÁ "
-#~ "Ú\n"
-#~ "    ÓÉÓÔÅÍÏÀ Microsoft Windows (ÁÂÏ ÎÁ ÍÁÛÉΦ Ú àΦËÓÏÍ, ÑËÁ "
-#~ "ËÏÒÉÓÔÕ¤ÔØÓÑ\n"
-#~ "    ÐÒÏÔÏËÏÌÏÍ SMB), ×ÉÂÅÒ¦ÔØ \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "    ñËÝÏ ×É ÈÏÞÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÐÒÉÎÔÅÒÏÍ, ÑËÉÊ Ð¦Ä'¤ÄÎÁÎÉÊ ÄÏ ÍÅÒÅÖ¦\n"
-#~ "    NetWare, ×ÉÂÅÒ¦ÔØ \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "îÅ ×ÄÁÌÏÓÑ ×¦ÄÛÕËÁÔÉ ÷ÁÛ ÐÒÉÎÔÅÒ. âÕÄØ-ÌÁÓËÁ, ××ÅĦÔØ ÐÒÉÓÔÒ¦Ê, ÄÏ\n"
-#~ "ÑËÏÇÏ ×¦Î Ð¦ÄËÌÀÞÅÎÉÊ.\n"
-#~ "\n"
-#~ "\n"
-#~ "äÌÑ ÄÏצÄËÉ: ¦ÌØÛ¦ÓÔØ ÐÒÉÎÔÅÒ¦× Ð¦ÄËÌÀÞÁÀÔØÓÑ ÄÏ ÐÁÒÁÌÅÌØÎÏÇÏ ÐÏÒÔÕ. \n"
-#~ "\n"
-#~ "÷¦Î Ú×ÅÔØÓÑ \"/dev/lp0\" × ì¦ÎÁËÓ¦ ¦ \"LPT1\" × Microsoft Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "÷É ÍÁ¤ÔÅ ×ÉÂÒÁÔÉ Ó×¦Ê ÐÒÉÎÔÅÒ Õ ÓÐÉÓËÕ ÐÏÄÁÎÏÍÕ ×ÉÝÅ."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "âÕÄØ-ÌÁÓËÁ, ×ÉÂÅÒ¦ÔØ ÐÏÔÒ¦ÂΦ ÐÁÒÁÍÅÔÒÉ ÄÌÑ ÷ÁÛÏÇÏ\n"
-#~ "ÐÒÉÎÔÅÒÁ. ú×ÅÒΦÔØÓÑ ÄÏ ÄÏËÕÍÅÎÔÁæ§, ÑËÝÏ ×É ÎÅ ÚÎÁ¤ÔŠצÒÎÉÈ\n"
-#~ "ÚÎÁÞÅÎØ.\n"
-#~ "\n"
-#~ "\n"
-#~ "îÁ ÎÁÓÔÕÐÎÏÍÕ ËÒÏæ ×É ÚÍÏÖÅÔÅ ×ÉÐÒÏÂÕ×ÁÔÉ ÃÀ ËÏÎƦ­ÕÒÁæÀ ¦ ×ÉÐÒÁ×ÉÔÉ\n"
-#~ "§§ ÑËÝÏ ÝÏÓØ ÎÅ ÓÐÒÁÃÀ¤ ÔÁË, ÑË ×É ÐÅÒÅÄÂÁÞÁÌÉ."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ××ÅÓÔÉ ÐÁÒÏÌØ ÄÌÑ ËÏÒÉÓÔÕ×ÁÞÁ \"root\" ÄÌÑ ÷ÁÛϧ\n"
-#~ "ÓÉÓÔÅÍÉ Mandrake ì¦ÎÁËÓ. ðÁÒÏÌØ ÐÏÔÒ¦ÂÎÏ ××ÏÄÉÔÉ Äצަ, ÝÏÂ\n"
-#~ "ÐÅÒÅËÏÎÁÔÉÓÑ, ÝÏ ×¦Î ÂÕ× ××ÅÄÅÎÉÊ ÏÂÉÄ×Á ÒÁÚÉ ÏÄÉÎ ¦ ÔÏÊ ÖÅ\n"
-#~ "\n"
-#~ "\n"
-#~ "Root - ÃÅ ÁÄͦΦÓÔÒÁÔÏÒ ÓÉÓÔÅÍÉ ¦ ¤ÄÉÎÉÊ ËÏÒÉÓÔÕ×ÁÞ, ÑËÏÍÕ ÄÏÚ×ÏÌÅÎÏ\n"
-#~ "ÚͦÎÀ×ÁÔÉ ÓÉÓÔÅÍÎÕ ËÏÎƦÇÕÒÁæÀ. ôÏÍÕ ×ÉÂÉÒÁÊÔÅ ÃÅÊ ÐÁÒÏÌØ ÄÕÖÅ\n"
-#~ "ÄÂÁÊÌÉ×Ï! îÅÁ×ÔÏÒÉÚÏ×ÁÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ ÷ÁÛÏÀ ÓÉÓÔÅÍÏÀ ÍÏÖÅ ÂÕÔÉ\n"
-#~ "ÎÁÄÚ×ÉÞÁÊÎÏ ÎÅÂÅÚÐÅÞÎÉÍ ÄÌÑ Ã¦Ì¦ÓÎÏÓÔ¦ ÓÉÓÔÅÍÉ ÔÁ ÄÁÎÉÈ Õ Î¦Ê, Á\n"
-#~ "ÔÁËÏÖ ÄÌÑ ¦ÎÛÉÈ ÓÉÓÔÅÍ ÄÏ Îŧ ЦÄËÌÀÞÅÎÉÈ. \n"
-#~ "\n"
-#~ "\n"
-#~ "ðÁÒÏÌØ ÐÏ×ÉÎÅÎ ÓËÌÁÄÁÔÉÓÑ ¦Ú ÓÕͦۦ ÁÌÆÁצÔÎÏ-ÃÉÆÒÏ×ÉÈ ÓÉÍ×ÏÌ¦× ¦ ÂÕÔÉ\n"
-#~ "ÎÅ ÍÅÎÛÅ, Î¦Ö 8 ÓÉÍ×ÏÌ¦× ÚÁ×ÄÏ×ÖËÉ. êÏÇÏ Î¦ËÏÌÉ ÎÅ ÍÏÖÎÁ ΦÄÅ\n"
-#~ "ÚÁÐÉÓÕ×ÁÔÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "îÅ ×ÉÂÉÒÁÊÔÅ ÚÁÎÁÄÔÏ ÄÏ×ÇÉÊ ÐÁÒÏÌØ ÁÂÏ ÚÁÎÁÄÔÏ ÓËÌÁÄÎÉÊ: ÷ÁÍ ÔÒÅÂÁ\n"
-#~ "ÊÏÇÏ ÐÁÍ'ÑÔÁÔÉ."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ×É ÍÏÖÅÔÅ ÓÔ×ÏÒÉÔÉ ÏÄÉÎ ÁÂÏ Â¦ÌØÛÅ \"Ú×ÉÞÁÊÎÉÈ\" ÒÁÈÕÎË¦× ÄÌÑ\n"
-#~ "ËÏÒÉÓÔÕ×ÁÞ¦× (ÎÅ \"ÐÒÉצÌÅÊÏ×ÁÎÉÈ\" ÑË root ÒÁÈÕÎ˦×). ÷É ÍÏÖÅÔÅ\n"
-#~ "ÓÔ×ÏÒÉÔÉ ÏÄÉÎ ÁÂÏ Â¦ÌØÛÅ ÒÁÈÕÎË¦× ÄÌÑ ËÏÖÎÏÇÏ Ú ËÏÒÉÓÔÕ×ÁÞ¦× ÷ÁÛϧ\n"
-#~ "ÓÉÓÔÅÍÉ. ÷¦ÄͦÔØÔÅ, ÝÏ ËÏÖÅÎ ÒÁÈÕÎÏË ¦Ú ÓÔ×ÏÒÅÎÉÈ ÷ÁÍÉ ÂÕÄÅ ÍÁÔÉ Ó×ϧ\n"
-#~ "×ÌÁÓΦ ÕÓÔÁÎÏ×ËÉ (ÔÁ˦, ÑË ÇÒÁƦÞÎÅ ÓÅÒÅÄÏ×ÉÝÅ, ÕÓÔÁÎÏ×ËÉ ÐÒÏÇÒÁÍ,\n"
-#~ "ÔÏÝÏ) ¦ Ó×ÏÀ ×ÌÁÓÎÕ \"ÄÏÍÁÛÎÀ ÄÉÒÅËÔÏÒ¦À\", ÄÅ ÚÂÅÒ¦ÇÁÀÔØÓÑ ×Ó¦ æ\n"
-#~ "ÕÓÔÁÎÏ×ËÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ðÅÒÛ ÚÁ ×ÓÅ ÓÔ×ÏÒ¦ÔØ ÒÁÈÕÎÏË ÄÌÑ ÓÅÂÅ ÓÁÍÏÇÏ! îÁצÔØ, ÑËÝÏ ×É ÂÕÄÅÔÅ\n"
-#~ "¤ÄÉÎÉÍ ËÏÒÉÓÔÕ×ÁÞÅÍ Ã¦¤§ ÓÉÓÔÅÍÉ, ×É îå ðï÷éîî¶ ËÏÒÉÓÔÕ×ÁÔÉÓÑ Ó×ϤÀ\n"
-#~ "ÓÉÓÔÅÍÏÀ ÑË root ÄÌÑ Ú×ÉÞÁÊÎϧ ÒÏÂÏÔÉ: ÃÅ ÄÕÖÅ ×ÉÓÏËÉÊ ÒÉÚÉË. ýÏÂ\n"
-#~ "ÚÒÏÂÉÔÉ Ó×ÏÀ ÓÉÓÔÅÍÕ ÎÅÐÒÉÇÏÄÎÏÀ ÄÕÖÅ ÞÁÓÔÏ ÄÏÓÔÁÔÎØÏ ÏÄΦ¤§ ÐÏÍÉÌËÉ\n"
-#~ "ÐÒÉ ÄÒÕËÕ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ïÔÖÅ, ×É ÂÕÄÅÔÅ ÒŤÓÔÒÕ×ÁÔÉÓÑ × ÓÉÓÔÅͦ ¦Ú Ó×Ï§Í ×ÌÁÓÎÉÍ ¦ÍÅÎÅÍ ÔÁ\n"
-#~ "ÐÁÒÏÌÅÍ, Ñ˦ ×É ÓÔ×ÏÒÉÔÅ, ÔÁ ÒŤÓÔÒÕ×ÁÔÉÓÑ × ÓÉÓÔÅͦ ÑË root ÄÌÑ\n"
-#~ "ÁÄͦΦÓÔÒÁæ§."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "óÔ×ÏÒÅÎÎÑ ÄÉÓËÕ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÎÁÓÔ¦ÊÌÉ×Ï ÒÅËÏÍÅÎÄÕ¤ÔØÓÑ. ñËÝÏ ×É ÎÅ\n"
-#~ "ÚÍÏÖÅÔÅ ÚÁ×ÁÎÔÁÖÉÔÉ Ó×¦Ê ËÏÍÐ'ÀÔÅÒ -- ÃÅ ¤ÄÉÎÉÊ ÛÌÑÈ ×ÒÑÔÕ×ÁÔÉ ÷ÁÛÕ\n"
-#~ "ÓÉÓÔÅÍÕ ÂÅÚ ÐÅÒÅ×ÓÔÁÎÏ×ÌÅÎÎÑ ×Ó¦¤§ ÏÐÅÒÁæÊÎϧ ÓÉÓÔÅÍÉ."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "ïÓÎÏ×Φ ÐÁÒÁÍÅÔÒÉ ÄÌÑ LILO ÔÁ grub:\n"
-#~ "  - ðÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÕ×ÁÎÎÑ: ÷ÓÔÁÎÏ×ÌÀ¤ ÎÁÚ×Õ ÐÒÉÓÔÒÏÀ (ÎÁÐÒÉËÌÁÄ,\n"
-#~ "ЦÄÒÏÚÄ¦Ì ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ), ÑËÉÊ Í¦ÓÔÉÔØ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ ÓÅËÔÏÒ. ñËÝÏ\n"
-#~ "×É ÎÁÐÅ×ÎÅ ÎÅ ÚÎÁ¤ÔÅ, ÝÏ ÔÒÅÂÁ ÚÒÏÂÉÔÉ ¦ÎÁËÛÅ, ×ËÁÖ¦ÔØ \"/dev/hda\" ÔÕÔ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ðÁÕÚÁ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ ÏÓÎÏ×Îϧ ÓÉÓÔÅÍÉ: ÷ÉÚÎÁÞÁ¤ ÞÁÓ Õ\n"
-#~ "ÏÄÉÎÉÃÑÈ, Ò¦×ÎÉÈ ÏÄÎ¦Ê ÄÅÓÑÔ¦Ê ÓÅËÕÎÄÉ, ÑËÉÊ ÓÉÓÔÅÍÁ ÂÕÄÅ ÞÅËÁÔÉ ÐÅÒÛ,\n"
-#~ "Î¦Ö ÐÏÞÁÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÏÓÎÏ×Îϧ ÓÉÓÔÅÍÉ, ×ËÁÚÁÎϧ × ËÏÎƦÇÕÒÁæ§. ãÅ\n"
-#~ "ÍÏÖÎÁ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ É ÔÉÈ ×ÉÐÁÄËÁÈ, ËÏÌÉ ÓÉÓÔÅÍÁ ÚÒÁÚÕ Ö ÐÒÉÓÔÕÐÁ¤\n"
-#~ "ÄÏ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ Ð¦ÓÌÑ ¦Î¦Ã¦Á̦ÚÁæ§ ËÌÁצÁÔÕÒÉ. ðÒÏÇÒÁÍÁ\n"
-#~ "ÚÁ×ÁÎÔÁÖÅÎÎÑ ÎÅ ÒÏÂÉÔØ ÐÁÕÚÉ ÚÏ×Ó¦Í, ÑËÝÏ ÐÁÒÁÍÅÔÒ \"delay\" ÄÏÒ¦×ÎÀ¤\n"
-#~ "ÎÕÌÀ ÁÂÏ ÐÒÏÐÕÝÅÎÏ ÚÏ×Ó¦Í.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ÷¦ÄÅÏ ÒÅÖÉÍ: ÷ËÁÚÕ¤ צÄÅÏ ÒÅÖÉÍ VGA, ÑËÉÊ ÐÏÔÒ¦ÂÎÏ ×ÍÉËÎÕÔÉ ÐÒÉ\n"
-#~ "ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ. íÏÖÅ ÍÁÔÉ ÔÁ˦ ÚÎÁÞÅÎÎÑ:\n"
-#~ "\n"
-#~ "    * ÎÏÒÍÁÌØÎÉÊ: ×ÓÔÁÎÏ×ÌÀ¤ Ú×ÉÞÁÊÎÉÊ ÔÅËÓÔÏ×ÉÊ ÒÅÖÉÍ 80x25.\n"
-#~ "\n"
-#~ "    * <ÞÉÓÌÏ>: ×ÓÔÁÎÏ×ÌÀ¤ צÄÐÏצÄÎÉÊ ÔÅËÓÔÏ×ÉÊ ÒÅÖÉÍ.\n"
-#~ "\n"
-#~ "  - ïÞÉÝÁÔÉ ÄÉÒÅËÔÏÒ¦À \"/tmp\" ÐÒÉ ËÏÖÎÏÍÕ ÚÁ×ÁÎÔÁÖÅÎΦ: ÑËÝÏ ×ÁÍ\n"
-#~ "ÐÏÔÒ¦ÂÎÏ ÝÏ ×Ó¦ ÆÁÊÌÉ ÔÁ ÄÉÒÅËÔÏÒ¦§ × ÄÉÒÅËÔÏÒ¦§.\n"
-#~ "\n"
-#~ "  - ôÏÞÎÉÊ ÒÏÚÍ¦Ò ÏÐÅÒÁÔÉ×Îϧ ÐÁÍ'ÑÔ¦: ÎÁ ÖÁÌØ ÎÅ ¦ÓÎÕ¤ ÓÔÁÎÄÁÒÔÎÏÇÏ\n"
-#~ "ÓÐÏÓÏÂÕ ÄÌÑ ÔÏÇÏ, ÝÏ ĦÚÎÁÔÉÓÑ ÔÏÞÎÉÊ ÒÏÚÍ¦Ò ÐÁÍ'Ô¦ Õ BIOS'Á. ñË\n"
-#~ "ÎÁÓ̦ÄÏË ÃØÏÇÏ - ì¦ÎÁËÓ ÍÏÖÅ ÎÅצÒÎÏ × ÄÅÑËÉÈ ×ÉÐÁÄËÁÈ ×ÉÚÎÁÞÉÔÉ ÏÂ'¤Í\n"
-#~ "ÐÁÍ'ÑÔ¦ ÷ÁÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ. ñËÝÏ ÃÅ ÔÁË, ×É ÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ×¦ÒÎÉÊ\n"
-#~ "ÏÂ'¤Í ÔÕÔ. úÁÕ×ÁÖÔÅ, ÝÏ Ò¦ÚÎÉÃÑ Õ 2-4íÂ Í¦Ö ÓÐÒÁ×ÖÎ¦Í ÏÂ'¤ÍÏÍ ¦ ÔÉÍ,\n"
-#~ "ÐÒÏ ÑËÉÊ ÐÏצÄÏÍÌѤ BIOS ÎÅÓÕÔÔ¤×Á."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO - ÃÅ ÓÉÓÔÅÍÎÉÊ ÚÁ×ÁÎÔÁÖÕ×ÁÞ ÄÌÑ SPARC: צΠÍÏÖÅ ÚÁ×ÁÎÔÁÖÉÔÉ ÁÂÏ\n"
-#~ "GNU/ì¦ÎÁËÓ ÁÂÏ ÂÕÄØ-ÑËÕ ¦ÎÛÕ ÏÐÅÒÁæÊÎÕ ÓÉÓÔÅÍÕ ÎÁ ÷ÁÛÏÍÕ\n"
-#~ "ËÏÍÐ'ÀÔÅÒ¦. úÁ ÎÏÒÍÁÌØÎÉÈ ÕÍÏ× Ã¦ ÏÐÅÒÁæÊΦ ÓÉÓÔÅÍÉ ×¦ÒÎÏ\n"
-#~ "×ÉÚÎÁÞÁÀÔØÓÑ ÔÁ ×ÓÔÁÎÏ×ÌÀÀÔØÓÑ. ñËÝÏ ÃÅ ÎÅ ÔÁË, ×É ÍÏÖÅÔÅ ÄÏÄÁÔÉ\n"
-#~ "ÐÏÔÒ¦ÂÎÉÊ ÐÕÎËÔ ÓÁÍÏÓÔ¦ÊÎÏ. õ×ÁÖÎÏ ×ÉÂÅÒ¦ÔØ ÐÏÔÒ¦ÂΦ ÐÁÒÁÍÅÔÒÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "÷É, ÍÏÖÌÉ×Ï, ÔÁËÏÖ ÚÁÈÏÞÅÔÅ ÚÁËÒÉÔÉ ÄÏÓÔÕÐ ÄÏ ÃÉÈ ÏÐÅÒÁæÊÎÉÈ ÓÉÓÔÅÍ\n"
-#~ "¦ÎÛÉÍ, × ÃØÏÍÕ ×ÉÐÁÄËÕ ×É ÍÏÖÅÔÅ ÓÔÅÒÔÉ ×¦ÄÐÏצÄΦ ÐÕÎËÔÉ × ÆÁÊ̦\n"
-#~ "ËÏÎƦ­ÕÒÁæ§. áÌÅ × ÃØÏÍÕ ×ÉÐÁÄËÕ ÷ÁÍ ÐÏÔÒ¦ÂÎÁ ÂÕÄÅ ÓÐÅæÁÌØÎÉÊ\n"
-#~ "ÄÉÓË, ÝÏ ÚÁ×ÁÎÔÁÖÉÔÉ Ã¦ ÓÉÓÔÅÍÉ!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "ïÓÎÏ×Φ ÐÁÒÁÍÅÔÒÉ ÄÌÑ SILO:\n"
-#~ "  - ðÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÕ×ÁÎÎÑ: ÷ÓÔÁÎÏ×ÌÀ¤ ÎÁÚ×Õ ÐÒÉÓÔÒÏÀ (ÎÁÐÒÉËÌÁÄ,\n"
-#~ "ÒÏÚÄ¦Ì ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ), ËÕÄÉ ÚÁÐÉÓÕ¤ÔØÓÑ ¦ÎÆÏÒÍÁÃ¦Ñ ÎÅÏÂȦÄÎÁ ÄÌÑ\n"
-#~ "ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ. ñËÝÏ ×É ÎÁÐÅ×ÎÅ ÎÅ ÚÎÁ¤ÔÅ, ÝÏ ÔÒÅÂÁ ÚÒÏÂÉÔÉ\n"
-#~ "¦ÎÁËÛÅ, ×ËÁÖ¦ÔØ \"ðÅÒÛÉÊ ÓÅËÔÏÒ ÄÉÓËÕ (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ðÁÕÚÁ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ ÏÓÎÏ×Îϧ ÓÉÓÔÅÍÉ: ÷ÉÚÎÁÞÁ¤ ÞÁÓ Õ\n"
-#~ "ÏÄÉÎÉÃÑÈ Ò¦×ÎÉÈ ÏÄÎ¦Ê ÄÅÓÑÔ¦Ê ÓÅËÕÎÄÉ, ÑËÉÊ ÓÉÓÔÅÍÁ ÂÕÄÅ ÞÅËÁÔÉ ÐÅÒÛ,\n"
-#~ "Î¦Ö ÐÏÞÁÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÏÓÎÏ×Îϧ ÓÉÓÔÅÍÉ, ×ËÁÚÁÎϧ × ËÏÎƦÇÕÒÁæ§. ãÅ\n"
-#~ "ÍÏÖÎÁ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ É ÔÉÈ ×ÉÐÁÄËÁÈ, ËÏÌÉ ÓÉÓÔÅÍÁ ÚÒÁÚÕ Ö ÐÒÉÓÔÕÐÁ¤\n"
-#~ "ÄÏ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ Ð¦ÓÌÑ ¦Î¦Ã¦Á̦ÚÁæ§ ËÌÁצÁÔÕÒÉ. ðÒÏÇÒÁÍÁ\n"
-#~ "ÚÁ×ÁÎÔÁÖÅÎÎÑ ÎÅ ÒÏÂÉÔØ ÐÁÕÚÉ ÚÏ×Ó¦Í, ÑËÝÏ ÐÁÒÁÍÅÔÒ \"delay\" ÄÏÒ¦×ÎÀ¤\n"
-#~ "ÎÕÌÀ ÁÂÏ ÐÒÏÐÕÝÅÎÏ ÚÏ×Ó¦Í."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ÞÁÓ ÚÁÊÎÑÔÉÓÑ ËÏÎƦÇÕÒÁæ¤À ÓÉÓÔÅÍÉ X Window, ÑËÁ ÌÅÖÉÔØ × ÓÅÒæ\n"
-#~ "ÇÒÁƦÞÎÏÇÏ ÓÅÒÅÄÏ×ÉÝÁ (GUI - Graphical User Interface)\n"
-#~ "GNU/ì¦ÎÁËÓÁ. äÌÑ ÃØÏÇÏ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÓËÏÎƦÇÕÒÕ×ÁÔÉ Ó×ÏÀ צÄÅÏÐÌÁÔÕ ÔÁ\n"
-#~ "ÍÏΦÔÏÒ. â¦ÌØÛ¦ÓÔØ ËÒÏË¦× ÐÒÉ ÃØÏÍÕ Á×ÔÏÍÁÔÉÚÏ×ÁΦ, ÏÔÖÅ ÷ÁÛÏÀ ÚÁÄÁÞÅÀ\n"
-#~ "ÂÕÄÅ × ÏÓ×ÎÏ×ÎÏÍÕ × ÐÅÒÅצÒæ ×ÉÚÎÁÞÅÎÉÈ ÐÁÒÁÍÅÔÒ¦× ÔÁ Õ ×¦ÄÐÏצÄÑÈ\n"
-#~ "\"ôÁË\" :)\n"
-#~ "\n"
-#~ "\n"
-#~ "ð¦ÓÌÑ ÚÁ˦ÎÞÅÎÎÑ ËÏÎƦÇÕÒÕ×ÁÎÎÑ X ÓÔÁÒÔÕ¤ (ÑËÝÏ ×É ÎÅ ×ËÁÖÅÔÅ DrakX\n"
-#~ "ÐÒÏÔÉÌÅÖÎÅ), ÏÔÖÅ ×É ÚÍÏÖÅÔÅ ÐÅÒÅצÒÉÔÉ ¦ ×ÐÅ×ÎÉÔÉÓÑ, ÝÏ ×Ó¦ ÷ÁÛ¦\n"
-#~ "ÕÓÔÁÎÏ×ËÉ ×¦ÒΦ. ñËÝÏ ÷ÁÍ ÎŠЦÄÈÏÄÑÔØ Ã¦ ÕÓÔÁÎÏ×ËÉ, ×É ÍÏÖÅÔÅ\n"
-#~ "ÐÏ×ÅÒÔÁÔÉÓÑ ÎÁÚÁÄ ¦ ÚͦÎÀ×ÁÔÉ §È ÂÕÄØ-ÑËÕ Ë¦ÌØ˦ÓÔØ ÒÁÚ¦×. "
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "ñËÝÏ ¦Ú ËÏÎƦ­ÕÒÁæ¤À X Window ÝÏÓØ ÎÅ ×ÐÏÒÑÄËÕ, ÓËÏÒÉÓÔÁÊÔÅÓÑ ÃÉÍÉ\n"
-#~ "ÏÐæÑÍÉ ÄÌÑ ÔÏÇÏ, ÝÏ צÒÎÏ ×ÓÔÁÎÏ×ÉÔÉ X Window."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "ñËÝÏ ×É ÈÏÞÅÔÅ ÒŤÓÔÒÕ×ÁÔÉÓÑ × ÓÉÓÔÅͦ Ú ÇÒÁƦÞÎÏÇÏ ÅËÒÁÎÕ, ×ÉÂÅÒ¦ÔØ\n"
-#~ "\"ôÁË\". ¶ÎÁËÛÅ - ×ÉÂÅÒ¦ÔØ \"î¦\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "íÏÖÅÔÅ ×ÉÂÒÁÔÉ Ò¦×ÅÎØ ÂÅÚÐÅËÉ ÄÌÑ ÓÉÓÔÅÍÉ. ú×ÅÒΦÔØÓÑ, ÂÕÄØ ÌÁÓËÁ, ÄÏ\n"
-#~ "ЦÄÒÕÞÎÉËÁ ÄÌÑ ÏÔÒÉÍÁÎÎÑ ÐÏ×Îϧ ¦ÎÆÏÒÍÁæ§. úÁÇÁÌÏÍ, ÑËÝÏ ×É ÎÅ\n"
-#~ "ÚÎÁ¤ÔÅ, ÝÏ ×ÉÂÒÁÔÉ, ÚÁÌÉÛÔÅ ÓÔÁÎÄÁÒÎÉÊ ÐÕÎËÔ.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "÷ÁÛÁ ÓÉÓÔÅÍÁ ÂÕÄÅ ÚÁÒÁÚ ÐÅÒÅ×ÁÎÔÁÖÅÎÁ.\n"
-#~ "\n"
-#~ "ð¦ÓÌÑ ÃØÏÇÏ Á×ÔÏÍÁÔÉÞÎÏ ÚÁ×ÁÎÔÁÖÉÔØÓÑ ÷ÁÛÁ ÎÏ×Á ÓÉÓÔÅÍÁ\n"
-#~ "Mandrake Linux. ñËÝÏ ×É ÈÏÞÅÔÅ ÚÁ×ÁÎÔÁÖÉÔÉ ¦ÎÛÕ ÓÉÓÔÅÍÕ, ÞÉÔÁÊÔÅ,\n"
-#~ "ÂÕÄØ-ÌÁÓËÁ, ÄÏÄÁÔËÏצ ¦ÎÓÔÒÕËæ§."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "þÅÓØËÁ (ÐÒÏÇÒÁͦÓÔ)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "óÌÏ×ÁÃØËÁ (ÐÒÏÇÒÁͦÓÔÉ)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "îÁÚ×Á ÐÒÏƦÌÀ ÄÌÑ ÓÔ×ÏÒÅÎÎÑ:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "úÁÐÉÓÁÔÉ /etc/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÆÁÊÌÕ"
-
-#~ msgid "Save in file"
-#~ msgstr "úÁÐÉÓÁÔÉ × ÆÁÊÌ"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÄÉÓËÅÔÉ"
-
-#~ msgid "Format all"
-#~ msgstr "æÏÒÍÁÔÕ×ÁÔÉ ×ÓÅ"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "ð¦ÓÌÑ ÆÏÒÍÁÔÕ×ÁÎÎÑ ×Ó¦È Ð¦ÄÒÏÚĦ̦×,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "×Ó¦ ÄÁΦ ÎÁ ÃÉÈ Ð¦ÄÒÏÚĦÌÁÈ ÂÕÄÅ ×ÔÒÁÞÅÎÏ"
-
-#~ msgid "Reload"
-#~ msgstr "ðÅÒÅÚÁ×ÁÎÔÁÖÉÔÉ"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "þÉ ÈÏÞÅÔÅ ÷É ÓÔ×ÏÒÉÔÉ Á×ÔÏ-ÕÓÔÁÎÏ×ÏÞÎÕ ÄÉÓËÅÔÕ ÄÌÑ ÂÁÇÁÔÏÒÁÚÏ×ÉÈ "
-#~ "ÕÓÔÁÎÏ×ÏË ÓÉÓÔÅÍÉ?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "äÌÑ ×¦ÄÄÁÌÅÎÏÇÏ ÓÅÒ×ÅÒÁ CUPS ÷ÁÍ ÎÅ ÐÏÔÒ¦ÂÎÏ ËÏÎƦ­ÕÒÕ×ÁÔÉ ÐÒÉÎÔÅÒ¦×,\n"
-#~ "×Ó¦ ÐÒÉÎÔÅÒÉ ÂÕÄÕÔØ Á×ÔÏÍÁÔÉÞÎÏ ×ÉÚÎÁÞÅΦ, õ ×ÉÐÁÄËÕ, ËÏÌÉ ÓÅÒ×ÅÒ\n"
-#~ "ÚÎÁÈÏÄÉÔØÓÑ Õ ¦ÎÛ¦Ê ÍÅÒÅÖ¦, ÷É ÍÁ¤ÔÅ ÎÁÄÁÔÉ ÔÕÔ IP ÁÄÒÅÓÕ ÓÅÒ×ÅÒÁ CUPS\n"
-#~ "¦ (ÎÅÏÂÏ×'ÑÚËÏ×Ï) ÎÏÍÅÒ ÐÏÒÔÁ."
-
-#~ msgid "Remote queue"
-#~ msgstr "÷¦ÄÄÁÌÅÎÁ ÎÁÚ×Á ÐÒÉÎÔÅÒÁ"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "íÏΦÔÏÒÉέ ÍÅÒÅÖ¦"
-
-#~ msgid "Profile "
-#~ msgstr "ðÒÏƦÌØ "
-
-#~ msgid "Statistics"
-#~ msgstr "óÔÁÔÉÓÔÉËÁ"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "û×ÉÄ˦ÓÔØ ÐÅÒÅÄÁÞ¦:"
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "û×ÉÄ˦ÓÔØ ÐÒÉÊÏÍÕ: "
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "ú×'ÑÚÕÀÓØ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "÷¦Ä'¤ÄÎÕÀÓØ ×¦Ä ¦ÎÔÅÒÎÅÔÕ"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "îÅ ×ÄÁÌÏÓØ ×¦Ä'¤ÄÎÁÔÉÓÑ ×¦Ä ¦ÎÔÅÒÎÅÔÕ"
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "úÁ˦ÎÞÉÌÏÓØ ×¦Ä'¤ÄÎÁÎÎÑ ×¦Ä ¦ÎÔÅÒÎÅÔÕ"
-
-#~ msgid "Connection complete."
-#~ msgstr "ú'¤ÄÎÁÎÎÑ ÚÁ˦ÎÞÉÌÏÓØ."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "îÅ×ÄÁÌÅ  Ú'¤ÄÎÁÎÎÑ.\n"
-#~ "ðÅÒÅצÒÔÅ Ó×ÏÀ ËÏÎƦ­ÕÒÁæÀ × ãÅÎÔÒ¦ ëÅÒÕ×ÁÎÎÑ íÁÎÄÒÅÊË"
-
-#~ msgid "sent: "
-#~ msgstr "ÐÅÒÅÄÁÎÏ:"
-
-#~ msgid "received: "
-#~ msgstr "ÏÔÒÉÍÁÎÏ:"
-
-#~ msgid "Connect"
-#~ msgstr "ú'¤ÄÎÁÔÉÓØ"
-
-#~ msgid "Disconnect"
-#~ msgstr "÷¦Ä'¤ÄÎÁÔÉÓØ"
-
-#~ msgid "/File/_New"
-#~ msgstr "/æÁÊÌ/_îÏ×ÉÊ"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>N"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/æÁÊÌ/_÷¦ÄËÒÉÔÉ"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>O"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/æÁÊÌ/_úÁÐÉÓÁÔÉ"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/æÁÊÌ/úͦÎÉÔÉ ÎÁ_Ú×Õ"
-
-#~ msgid "/File/-"
-#~ msgstr "/æÁÊÌ/-"
-
-#~ msgid "/_Options"
-#~ msgstr "/_ðÁÒÁÍÅÔÒÉ"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/ðÁÒÁÍÅÔÒÉ/ôÅÓÔ"
-
-#~ msgid "/_Help"
-#~ msgstr "/_ð¦ÄËÁÚËÁ"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/ð¦ÄËÁÚËÁ/_ðÒÏ..."
-
-#~ msgid "Europe"
-#~ msgstr "´×ÒÏÐÁ"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "úͦÓÔ ÆÁÊÌÕ ËÏÎƦÇÕÒÁæ§ ÎÅ ÍÏÖÎÁ ¦ÎÔÅÒÐÒÅÔÕ×ÁÔÉ."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "îÅÒÏÚЦÚÎÁÎÉÊ ÆÁÊÌ ËÏÎƦ­ÕÒÁæ§"
-
-#~ msgid "Adapter"
-#~ msgstr "ðÌÁÔÁ"
-
-#~ msgid "Disable network"
-#~ msgstr "úÁÂÏÒÏÎÉÔÉ ÍÅÒÅÖÕ"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ×É ÍÏÖÅÔÅ ×ÉÐÒÏÂÕ×ÁÔÉ ÷ÁÛÕ ÍÉÛËÕ. óÐÒÏÂÕÊÔÅ ÐÏËÏÒÉÓÔÕ×ÁÔÉÓÑ\n"
-#~ "ËÌÁצÛÁÍÉ ÔÁ ËÏ̦ÝÁÔËÏÍ ÝÏ ÐÅÒÅצÒÉÔÉ ×¦ÒΦÓÔØ ÕÓÔÁÎÏ×ÏË. ñËÝÏ ÝÏÓØ\n"
-#~ "ÎÅ × ÐÏÒÑÄËÕ, ËÌÁÃΦÔØ ÎÁ \"÷¦ÄͦÎÉÔÉ\" ÝÏ ×ÉÂÒÁÔÉ ¦ÎÛÉÊ ÄÒÁÊ×ÅÒ."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "ú'¤ÄÎÁÎÎÑ DSL (ÁÂÏ ADSL)"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "÷É ÐÒÑÍÏ ÍÏÖÅÔÅ ×ËÁÚÁÔÉ URI ÝÏ ÍÁÔÉ ÄÏÓÔÕÐ ÄÏ ÐÒÉÎÔÅÒÁ ÞÅÒÅÚ CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "ôÁË, ÎÁÄÒÕËÕ×ÁÔÉ ÔÅÓÔÏ×Õ ÓÔÏÒ¦ÎËÕ × ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "ôÁË, ÎÁÄÒÕËÕ×ÁÔÉ ÔÅÓÔÏ×Õ ÓÔÏÒ¦ÎËÕ × PostScript"
-
-#~ msgid "Paper Size"
-#~ msgstr "òÏÚÍ¦Ò ÐÁÐÅÒÕ"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "÷ÉÊÎÑÔÉ ÓÔÏÒ¦ÎËÕ Ð¦ÓÌÑ ÚÁ˦ÎÞÅÎÎÑ ÄÒÕËÕ?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "ïÐæ§ ÄÒÁÊ×ÅÒÁ Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "ïÐæ§ ÇÌÉÂÉÎÉ ËÏÌØÏÒÕ"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "äÒÕËÕ×ÁÔÉ ÔÅËÓÔ Õ ×ÉÇÌÑĦ PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "÷ÉÐÒÁ×ÌÑÔÉ ÅÆÅËÔ \"ÓÈÏÄÉÎÏË\"?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "ë¦ÌØ˦ÓÔØ ÓÔÏÒ¦ÎÏË ÎÁ ÏÄÉÎ ÄÒÕËÏ×ÁÎÉÊ ÁÒËÕÛ"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "ì¦×Á/ÐÒÁ×Á ÇÒÁÎÉÃÑ × ÐÕÎËÔÁÈ (1/72 ÄÀÊÍÁ)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "÷ÅÒÈÎÑ/ÎÉÖÎÑ  ÇÒÁÎÉÃÑ × ÐÕÎËÔÁÈ (1/72 ÄÀÊÍÁ)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "äÏÄÁÔËÏצ ÐÁÒÁÍÅÔÒÉ ÄÌÑ GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "äÏÄÁÔËÏצ ÕÓÔÁÎÏ×ËÉ ÄÌÑ ÔÅËÓÔÕ"
-
-#~ msgid "Reverse page order"
-#~ msgstr "ú×ÏÒÏÔÎ¦Ê ÐÏÒÑÄÏË ÓÔÏÒ¦ÎÏË"
-
-#~ msgid "CUPS starting"
-#~ msgstr "óÔÁÒÔÕ¤ CUPS"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "÷ÉÂÅÒ¦ÔØ Ú'¤ÄÎÁÎÎÑ ×¦ÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒÁ"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "ëÏÖÎÅÎ ÐÒÉÎÔÅÒ ÐÏ×ÉÎÅÎ ÍÁÔÉ ÎÁÚ×Õ (ÎÁÐÒÉËÌÁÄ lp). íÏÖÕÔØ ÂÕÔÉ\n"
-#~ "×ÉÚÎÁÞÅΦ ÔÁËÏÖ ¦ÎÛ¦ ÐÁÒÁÍÅÔÒÉ, ÔÁ˦, ÑË ÏÐÉÓ ÐÒÉÎÔÅÒÁ ÔÁ ÊÏÇÏ\n"
-#~ "ÒÏÚÔÁÛÕ×ÁÎÎÑ. ñËÕ ÎÁÚ×Õ ÔÁ ÄÉÒÅËÔÏÒ¦À ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÁÔÉ ÄÌÑ ÃØÏÇÏ\n"
-#~ "ÐÒÉÎÔÅÒÁ ÔÁ ÑË ÃÅÊ ÐÒÉÎÔÅÒ Ð¦ÄËÌÀÞÅÎÉÊ?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "ëÏÖÎÅÎ ÐÒÉÎÔÅÒ ÐÏ×ÉÎÅÎ ÍÁÔÉ ÞÅÒÇÕ (ÎÁ ÑËÕ ÐÏÓÉÌÁÀÔØÓÑ ÒÏÂÏÔÉ ÄÒÕËÕ) ÔÁ\n"
-#~ "ÎÁÚ×Õ (ÞÁÓÔÏ lp) ÔÁ ÄÉÒÅËÔÏÒ¦À ÄÌÑ ÓÐÕ̦έÕ, ÑËÁ Ú ÎÉÍ Ú×'ÑÚÁÎÁ. ñËÕ\n"
-#~ "ÎÁÚ×Õ ÔÁ ÄÉÒÅËÔÏÒ¦À ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÁÔÉ ÄÌÑ ÃØÏÇÏ ÐÒÉÎÔÅÒÁ ÔÁ ÑË ÃÅÊ\n"
-#~ "ÐÒÉÎÔÅÒ Ð¦ÄËÌÀÞÅÎÉÊ?"
-
-#~ msgid "Name of queue"
-#~ msgstr "îÁÚ×Á ÞÅÒÇÉ ÐÒÉÎÔÅÒÁ"
-
-#~ msgid "Spool directory"
-#~ msgstr "äÉÒÅËÔÏÒ¦Ñ ÓÐÕ̦έÕ"
-
-#~ msgid "Disable"
-#~ msgstr "÷ÉÍËÎÕÔÉ"
-
-#~ msgid "Enable"
-#~ msgstr "äÏÚ×ÏÌÉÔÉ"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "äÌÑ ÚÁÂÅÚÐÅÞÅÎÎÑ Â¦ÌØÛÏÇÏ Ò¦×ÎÑ ÂÅÚÐÅËÉ ÄÌÑ ÓÉÓÔÅÍÉ, ÷ÁÍ ÓÌ¦Ä ×ÉÂÒÁÔÉ\n"
-#~ "\"÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ Ô¦ÎØÏצ ÐÁÒÏ̦\" ÔÁ \"ëÏÒÉÓÔÕ×ÁÔÉÓÑ ÐÁÒÏÌÑÍÉ MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "÷ÉÂÅÒ¦ÔØ \"÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ NIS\", ÑËÝÏ Õ ÷ÁÛ¦Ê ÍÅÒÅÖ¦ NIS\n"
-#~ "×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ. ñËÝÏ ×É ÎÅ ÚÎÁ¤ÔÅ, ÓÐÉÔÁÊÔÅ Õ Ó×ÏÇÏ ÁÄͦΦÓÔÒÁÔÏÒÁ\n"
-#~ "ÍÅÒÅÖ¦."
-
-#~ msgid "yellow pages"
-#~ msgstr "ÖÏ×Ô¦ ÓÔÏÒ¦ÎËÉ"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "1Ê DNS ÐÒÏ×ÁÊÄÅÒÁ"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "2Ê DNS ÐÒÏ×ÁÊÄÅÒÁ"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "ñË ÷É ÈÏÞÅÔÅ Ú'¤ÄÎÁÔÉÓÑ Ú ¦ÎÔÅÒÎÅÔÏÍ?"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "ãÅÊ ÓÔÁÒÔÏ×ÉÊ ÓËÒÉÐÔ ÐÒÏÂÕ¤ ÚÁ×ÁÎÔÁÖÉÔÉ ÍÏÄÕ̦ ÄÌÑ USB ÍÉÛËÉ."
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "ôÅÐÅÒ Ð¦ÓÌÑ ÔÏÇÏ, ÑË ÐÁÒÁÍÅÔÒÉ ÷ÁÛÏÇÏ Ú'¤ÄÎÁÎÎÑ Ú ¶ÎÔÅÒÎÅÔÏÍ\n"
-#~ "×ÓÔÁÎÏ×ÌÅΦ, ÷É ÍÏÖÅÔÅ ÓËÏƦ­ÕÒÕ×ÁÔÉ Ó×¦Ê ËÏÍÐ'ÀÔÅÒ ÔÁËÉÍ ÞÉÎÏÍ, ÝÏÂ\n"
-#~ "צΠÄÏÚ×ÏÌÑ× ÓЦÌØÎÅ ×ÉËÏÒÉÓÔÁÎÎÑ Ó×ÏÇÏ Ú'¤ÄÎÁÎÎÑ ÄÏ\n"
-#~ "¶ÎÔÅÒÎÅÔÕ. ðÒÉͦÔËÁ: ÷ÁÍ ÄÌÑ ÃØÏÇÏ ÐÏÔÒ¦ÂÎÏ ÍÁÔÉ ÐÌÁÔÕ ÍÅÒÅÖ¦, ÝÏÂ\n"
-#~ "ÎÁÓÔÒϧÔÉ ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ (LAN).\n"
-#~ "\n"
-#~ "þÉ ÈÏÞÅÔÅ ÷É ÎÁÓÔÒϧÔÉ ÓЦÌØÎÅ ×ÉËÏÒÉÓÔÁÎÎÑ Ú'¤ÄÎÁÎÎÑ Ú ¶ÎÔÅÒÎÅÔÏÍ?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "á×ÔÏÍÁÔÉÞΦ ÚÁÌÅÖÎÏÓÔ¦"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "îÁÓÔÒϧÔÉ LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "óÔ×ÏÒÉÔÉ ÄÉÓËÅÔÕ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-
-#~ msgid "Format floppy"
-#~ msgstr "æÏÒÍÁÔÕ×ÁÔÉ ÄÉÓËÅÔÕ"
-
-#~ msgid "Choice"
-#~ msgstr "÷ɦÒ"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÄÅÑ˦ Ò¦ÚÎÏÐÌÁÎÏצ ÏÐæ§ ÄÌÑ Ó×Ϥ§ ÓÉÓÔÅÍÉ.\n"
-#~ "\n"
-#~ "  * ëÏÒÉÓÔÕ×ÁÔÉÓÑ ÏÐÔÉͦÚÁæ¤À ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ: ãÑ ÏÐÃ¦Ñ ÍÏÖÅ\n"
-#~ "ÐÏËÒÁÝÉÔÉ Û×ÉÄ˦ÓÔØ ÒÏÂÏÔÉ ÄÉÓËÕ, ÁÌÅ ×ÏÎÁ - Ô¦ÌØËÉ ÄÌÑ ÄÏÓצÄÞÅÎÉÈ\n"
-#~ "ËÏÒÉÓÔÕ×ÁÞ¦×. ÷É ÍÏÖÅÔÅ ÚÎÉÝÉÔÉ Ó×¦Ê ÄÉÓË, ÑËÝÏ ÂÕÄÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ\n"
-#~ "ÎÅÀ ÎÅËÏÒÅËÔÎÏ. ÷ ÑÄÒ¦ ¦ÓÎÕ¤ Ó×¦Ê ÞÏÒÎÉÊ ÓÐÉÓÏË ÄÉÓË¦× ÔÁ ËÏÎÔÒÏÌÅÒ¦×,\n"
-#~ "Ñ˦ ÐÒÁÃÀÀÔØ ÎÅËÏÒÅËÔÎÏ, ÁÌÅ ÑËÝÏ ÷É ÈÏÞÅÔÅ ÐÏÚÂÕÔÉÓÑ ÎÅÐÒɤÍÎÉÈ\n"
-#~ "ÓÀÒÐÒÉÚ¦×, ÎÅ ËÏÒÉÓÔÕÊÔÅÓÑ ÃÉÍ.\n"
-#~ "\n"
-#~ "  * ÷ÉÂÒÁÔÉ Ò¦×ÅÎØ ÂÅÚÐÅËÉ: ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ Ò¦×ÅÎØ ÂÅÚÐÅËÉ ÄÌÑ Ó×Ϥ§\n"
-#~ "ÓÉÓÔÅÍÉ. úÁ ¦ÎÆÏÒÍÁæ¤À Ú×ÅÒΦÔØÓÑ ÄÏ ËÅÒ¦×ÎÉÃÔ×Á. ÷ Ä×ÏÈ ÓÌÏ×ÁÈ: ÑËÝÏ\n"
-#~ "÷É ÎÅ ÒÏÚÕͦ¤ÔÅ ÐÒÏ ÝÏ ÊÄÅÔØÓÑ, ÎÅ ÚͦÎÀÊÔÅ ÓÔÁÎÄÁÒÔÎÅ ÚÎÁÞÅÎÎÑ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * ôÏÞÎÉÊ ÒÏÚÍ¦Ò ÐÁÍ'ÑÔ¦, ÑËÝÏ ÐÏÔÒ¦ÂÎÏ: îÁ ÖÁÌØ × ÓØÏÇÏÄΦÛÎØÏÍÕ\n"
-#~ "ÓצԦ PC ÎÅ ¦ÓÎÕ¤ ÓÔÁÎÄÁÒÔÎÏÇÏ ÓÐÏÓÏÂÕ Ä¦ÚÎÁÔÉÓÑ Ú BIOS ÐÒÏ ÔÏÞÎÉÊ\n"
-#~ "ÏÂ'¤Í ÐÁÍ'ÑÔ¦ × ÓÉÓÔÅͦ. ñË ÎÁÓ̦ÄÏË ÃØÏÇÏ, × ÄÅÑËÉÈ ×ÉÐÁÄËÁÈ\n"
-#~ "GNU/ì¦ÎÁËÓ ÎÅ × ÚÍÏÚ¦ צÒÎÏ ×ÉÚÎÁÞÉÔÉ ×ÓÀ ×ÓÔÁÎÏ×ÌÅÎÏ × ÓÉÓÔÅͦ\n"
-#~ "ÐÁÍ'ÑÔØ (ÎÁ ÄÅÑËÉÈ ÓÉÓÔÅÍÁÈ). ñËÝÏ ÃÅ ÔÒÁÐÉÌÏÓØ Õ ÷ÁÛÏÍÕ ×ÉÐÁÄËÕ,\n"
-#~ "×ËÁÖ¦ÔØ ×¦ÒÎÉÈ ÏÂ'¤Í ÐÁÍ'ÑÔ¦. ÷¦ÄͦÔØÔÅ: Ò¦ÚÎÉÃÑ Õ 2-4 í - ÃÅ\n"
-#~ "ÎÏÒÍÁÌØÎÁ Ò¦Þ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * á×ÔÏÍÁÔÉÞÎÅ ÍÏÎÔÕ×ÁÎÎÑ ÚͦÎÎÉÈ ÎÏÓ¦§×: ñËÝÏ ÷ÁÍ ÐÏÄÏÂÁ¤ÔØÓÑ ÝÏÂ\n"
-#~ "ÚͦÎΦ ÎÏÓ¦§ (ÔÉÐÕ CDROM, ÄÉÓËÅÔ, ZIP) ÍÏÎÔÕ×ÁÌÉÓÑ Á×ÔÏÍÁÔÉÞÎÏ ÚÁͦÓÔØ\n"
-#~ "ÔÏÇÏ, ÝÏ ÷ÁÍ ×ÒÕÞÎÏ ÄÒÕËÕ×ÁÔÉ ËÏÍÁÎÄÉ \"mount\" ÔÁ \"umount\", ×ÉÂÅÒ¦ÔØ\n"
-#~ "ÃÅÊ ÐÕÎËÔ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * óÔÉÒÁÔÉ \"/tmp\" ÐÒÉ ËÏÖÎÏÍÕ ÓÔÁÒÔ¦: ñËÝÏ ÷É ÈÏÞÅÔÅ, ÝÏ ×Ó¦ ÆÁÊÌÉ\n"
-#~ "ÔÁ ЦÄËÁÔÁÌÏÇÉ Õ ËÁÔÁÌÏÚ¦ \"/tmp\" ÓÔÉÒÁÌÉÓÑ Á×ÔÏÍÁÔÉÞÎÏ ÐÒÉ ËÏÖÎÏÍÕ\n"
-#~ "ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ, ×ÉÂÅÒ¦ÔØ ÃÅÊ ÐÁÒÁÍÅÔÒ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * äÏÚ×ÏÌÉÔÉ NumLock ÐÒÉ ÓÔÁÒÔ¦: ñËÝÏ ÷É ÈÏÞÅÔÅ, ÝÏ ÷ÁÛ NumLock\n"
-#~ "Á×ÔÏÍÁÔÉÞÎÏ ×ÍÉËÁ×ÓÑ ÐÒÉ ÓÔÁÒÔ¦, ×ÉÂÅÒ¦ÔØ ÃÅÊ ÐÕÎËÔ (÷¦ÄͦÔØÔÅ, ÝÏ\n"
-#~ "NumLock ×ÓÅ ÏÄÎÏ ÎÅ ÂÕÄÅ ×ÍÉËÁÔÉÓÑ × X)."
-
-#~ msgid "Miscellaneous"
-#~ msgstr "ò¦ÚÎÅ"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "ò¦ÚΦ ÚÁÐÉÔÁÎÎÑ"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "ðÒÉ ×ÉÓÏËÏÍÕ Ò¦×Φ ÂÅÚÐÅËÉ ÎÅ ÍÏÖÕ ËÏÒÉÓÔÕ×ÁÔÉÓÑ supermount"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Õ×ÁÇÁ: ÎÁ ÃØÏÍÕ Ò¦×Φ ÂÅÚÐÅËÉ òå´óôòáã¶ñ ÷ óéóôåí¶ îá ëïîóïì¶, ñë\n"
-#~ "ëïòéóôõ÷áþ ROOT îå äïú÷ïìåîá! ñËÝÏ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÚÁÒŤÓÔÒÕ×ÁÔÉÓÑ ×\n"
-#~ "ÓÉÓÔÅͦ ÑË root, ÷É ÓÐÏÞÁÔËÕ ÍÁ¤ÔÅ ×צÊÔÉ × ÓÉÓÔÅÍÕ, ÑË Ú×ÉÞÁÊÎÉÊ\n"
-#~ "ËÏÒÉÓÔÕ×ÁÞ, Á ÐÏÔ¦Í ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ ËÏÍÁÎÄÏÀ \"su\". úÁÇÁÌÏÍ, ÎÅ ÞÅËÁÊÔÅ\n"
-#~ "×¦Ä Ó×Ϥ§ ÓÉÓÔÅÍÉ, ÝÏ ÷É ÚÍÏÖÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ §§ ÄÌÑ ÂÕÄØ-ÞÏÇÏ ËÒ¦Í\n"
-#~ "ÓÅÒ×ÅÒÁ.\n"
-#~ "\n"
-#~ "÷É ÐÏÐÅÒÅÄÖÅΦ."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "âÕÄØÔÅ Õ×ÁÖÎÉÍÉ, ÑËÝÏ ÷É ÄÏÚ×ÏÌÉÔÅ ×ÍÉËÎÅÎÎÑ numlock ÃÅ ÐÒÉÚ×ÅÄÅ ÄÏ\n"
-#~ "ÔÏÇÏ, ÝÏ ÂÁÇÁÔÏ Ñ˦ ËÌÁצۦ ÂÕÄÕÔØ ÄÒÕËÕ×ÁÔÉ ÃÉÆÒÉ ÚÁͦÓÔØ\n"
-#~ "̦ÔÅÒ. (ÔÁË, ÎÁÐÒÉËÌÁÄ, ÐÒÉ ÎÁÔÉÓËÁÎΦ `p' ÷É ÏÔÒÉÍÁ¤ÔÅ `6')"
-
-#~ msgid "First DNS Server"
-#~ msgstr "ðÅÒÛÉÊ ÓÅÒ×ÅÒ DNS"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "äÒÕÇÉÊ ÓÅÒ×ÅÒ DNS"
-
-#~ msgid "loopback"
-#~ msgstr "Ú×ÏÒÏÔΤ ÍÏÎÔÕ×ÁÎÎÑ"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "ñËÉÊ ÚÁ×ÁÎÔÁÖÕ×ÁÞ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "á×ÔÏ ÕÓÔÁÎÏ×ÏÞÎÁ ÄÉÓËÅÔÁ"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "óÐÒÏÂÕ×ÁÔÉ ×¦ÄÛÕËÁÔÉ ÍÏÄÅÍ?"
-
-#~ msgid "Configure local network"
-#~ msgstr "îÁÓÔÒϧÔÉ ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "ìÏËÁÌØÎÁ ÍÅÒÅÖÁ ×ÖÅ ×ÓÔÁÎÏ×ÌÅÎÁ. \n"
-#~ "þÉ ÷É ÈÏÞÅÔÅ:"
-
-#~ msgid "Configure timezone"
-#~ msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÞÁÓÏ×ÉÊ ÐÏÑÓ"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(ÍÏÖÅ ×ÉÚ×ÁÔÉ ×ÔÒÁÔÕ ÄÁÎÉÈ)"
-
-#~ msgid "Use hard drive optimisations?"
-#~ msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ ÏÐÔÉͦÚÁæ¤À ÄÉÓËÕ?"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "äÏÚ×ÏÌÉÔÉ numlock ÐÒÉ ÓÔÁÒÔ¦"
-
-#~ msgid "Confirm Password"
-#~ msgstr "ð¦ÄÔ×ÅÒÄÖÅÎÎÑ ÐÁÒÏÌÑ"
-
-#~ msgid "default"
-#~ msgstr "ÏÓÎÏ×ÎÉÊ"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "äÌÑ ÞÏÇÏ ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÷ÁÛÁ ÓÉÓÔÅÍÁ?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "÷ÉÂÅÒ¦ÔØ ÒÏÚͦÒ, ÑËÉÊ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "óÐÅæÁÌØÎÉÊ"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "÷É ÐÅ×Φ, ÝÏ ÷É ÅËÓÐÅÒÔ?\n"
-#~ "÷ÁÍ ÂÕÄÅ ÄÏÚ×ÏÌÅÎÏ ÒÏÂÉÔÉ ÓÅÒÊÏÚΦ ÁÌÅ ÎÅÂÅÚÐÅÞΦ ÒÅÞ¦.\n"
-#~ "\n"
-#~ "÷ÁÍ ÂÕÄÕÔØ ÚÁÄÁ×ÁÔÉÓÑ ÚÁÐÉÔÁÎÎÑ ÔÉÐÕ \"ëÏÒÉÓÔÕ×ÁÔÉÓÑ Ô¦ÎØÏ×ÉÍÉ\n"
-#~ "ÐÁÒÏÌÑÍÉ?\", ÷É Ä¦ÊÓÎÏ ÇÏÔÏצ ÄÏ ÔÁËÏÇÏ ÒÏÄÕ ÚÁÐÉÔÁÎØ?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ Ô¦ÎØÏצ ÐÁÒÏ̦"
-
-#~ msgid "shadow"
-#~ msgstr "Ô¦ÎØÏצ"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ MD5 ÐÁÒÏ̦"
-
-#~ msgid "Search"
-#~ msgstr "ðÏÛÕË"
-
-#~ msgid "Package"
-#~ msgstr "ðÁËÅÔ"
-
-#~ msgid "Text"
-#~ msgstr "ôÅËÓÔ"
-
-#~ msgid "Tree"
-#~ msgstr "äÅÒÅ×Ï"
-
-#~ msgid "Sort by"
-#~ msgstr "óÏÒÔÕ×ÁÔÉ ÚÁ"
-
-#~ msgid "Category"
-#~ msgstr "ëÁÔÅÇÏÒ¦Ñ"
-
-#~ msgid "See"
-#~ msgstr "äÉ×ÉÓØ"
-
-#~ msgid "Installed packages"
-#~ msgstr "÷ÓÔÁÎÏ×ÌÅΦ ÐÁËÅÔÉ"
-
-#~ msgid "Available packages"
-#~ msgstr "÷Ó¦ ÐÁËÅÔÉ"
-
-#~ msgid "Show only leaves"
-#~ msgstr "ðÏËÁÚÁÔÉ Ô¦ÌØËÉ ÚͦÎÉ"
-
-#~ msgid "Expand all"
-#~ msgstr "òÏÚÛÉÒÉÔÉ ×ÓÅ"
-
-#~ msgid "Collapse all"
-#~ msgstr "úÇÏÒÎÕÔÉ ×ÓÅ"
-
-#~ msgid "Add location of packages"
-#~ msgstr "äÏÄÁÔÉ Í¦ÓÃÅÚÎÁÈÏÄÖÅÎÎÑ ÐÁËÅÔ¦×"
-
-#~ msgid "Update location"
-#~ msgstr "ïÂÎÏ×ÉÔÉ Í¦ÓÃÅÚÎÁÈÏÄÖÅÎÎÑ"
-
-#~ msgid "Find Package"
-#~ msgstr "úÎÁÊÔÉ ÐÁËÅÔÉ"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "ûÕËÁÔÉ ÐÁËÅÔ, ÝÏ Í¦ÓÔÉÔØ ÆÁÊÌ"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "ðÅÒÅÍËÎÕÔÉ Í¦Ö ÷ÓÔÁÎÏ×ÌÅÎÉÊ ÔÁ äÏÓÔÕÐÎÉÊ"
-
-#~ msgid "Choose package to install"
-#~ msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔ ÄÌÑ ÕÓÔÁÎÏ×ËÉ"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "ðÅÒÅצÒËÁ ÚÁÌÅÖÎÏÓÔÅÊ"
-
-#~ msgid "Wait"
-#~ msgstr "þÅËÁÊÔÅ"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "㦠ÐÁËÅÔÉ ÂÕÄÕÔØ ÄŦÎÓÔÁÌØÏ×ÁÎÉÍÉ"
-
-#~ msgid "Uninstalling the RPMs"
-#~ msgstr "äŦÎÓÔÁÌÀÀ RPM'É"
-
-#~ msgid "Regexp"
-#~ msgstr "òÅÇ. ×ÉÒÁÚ"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "ñËÉÊ ÐÁËÅÔ ÛÕËÁ¤ÔÅ"
-
-#~ msgid "%s not found"
-#~ msgstr "îÅ ÚÎÁÊÄÅÎÏ %s."
-
-#~ msgid "No match"
-#~ msgstr "îÅצÄÐÏצÄΦÓÔØ"
-
-#~ msgid "No more match"
-#~ msgstr "îÅÍÁ¤ ÐÏÔÒ¦ÂÎÉÈ"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake ÚÁÒÁÚ ÚÎÁÈÏÄÉÔØÓÑ × ÒÅÖÉͦ ``ËÏÒÏÔËϧ ÐÁÍ'ÑÔ¦''.\n"
-#~ "ñ ÚÂÉÒÁÀÓØ ÐÅÒÅÚÁÐÕÓÔÉÔÉ rpmdrake, ÝÏ ÄÏÚ×ÏÌÉÔÉ ÐÏÛÕË ÆÁÊ̦×."
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "ñËÉÊ ÆÁÊÌ ÷É ÛÕËÁ¤ÔÅ?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "ýÏ ÷É ÛÕËÁ¤ÔÅ?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "äÁÊÔÅ ÎÁÚ×Õ (ÑË: `ÅËÓÔÒÁ', `ËÏÍÅÒæÊÎÉÊ')"
-
-#~ msgid "Directory"
-#~ msgstr "äÉÒÅËÔÏÒ¦Ñ"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "îÅÍÁ¤ ËÏÍÐÁËÔ-ÄÉÓËÕ (ÎÅÍÁ¤ ΦÞÏÇÏ × /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL ÄÉÒÅËÔÏÒ¦§, ÝÏ Í¦ÓÔÑÔØ RPM"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "äÌÑ FTP ÔÁ HTTP ÷É ÐÏ×ÉÎΦ ÚÁÄÁÔÉ Í¦ÓÃÅÐÏÌÏÖÅÎÎÑ hdlist\n"
-#~ "÷ÏÎÏ ÐÏ×ÉÎÎÏ ×ËÁÚÕ×ÁÔÉÓØ ×¦ÄÎÏÓÎÏ URL ÎÁ×ÅÄÅÎÏÇÏ ×ÉÝÅ"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "âÕÄØ-ÌÁÓËÁ, ÎÁÄÁÊÔÅ ÔÁËÕ ¦ÎÆÏÒÍÁæÀ"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s ×ÖÅ ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "ïÂÎÏ×ÌÀÀ ÂÁÚÕ RPM"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "óÔÉÒÁÀ ÐÕÎËÔ %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "úÎÁÈÏÄÖÕ ÓÔÅÒÔ¦"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "úÎÁÈÏÄÖÅÎÎÑ ÓÔÅÒÔÉÈ ÍÏÖÅ ÚÁÊÎÑÔÉ ÄÅÑËÉÊ ÞÁÓ"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "úÎÁÊÄÅÎÁ ÐÌÁÔÁ ISDN:\n"
-
-#~ msgid "France"
-#~ msgstr "æÒÁÎæÑ"
-
-#~ msgid "Other countries"
-#~ msgstr "¶ÎÛ¦ ËÒÁ§ÎÉ"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "÷ ÑË¦Ê ËÒÁ§Î¦ ÷É ÚÎÁÈÏÄÉÔÅÓØ?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "íÏÄÅÍ Alcatel"
-
-#~ msgid "ECI modem"
-#~ msgstr "íÏÄÅÍ ECI"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr "ñËÝÏ ÷ÁÛ ÍÏÄÅÍ adls ÔÉÐÕ Alctel, ×ÉÂÅÒ¦ÔØ  Alcatel. ñËÝÏ Î¦ - ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "ÎÅ ×ÖÉ×ÁÔÉ pppoe"
-
-#~ msgid "mandatory"
-#~ msgstr "×ÉÚÎÁÞÁÌØÎÉÊ"
-
-#~ msgid "interesting"
-#~ msgstr "æËÁ×Ï"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (×ÁÖÌÉ×ÉÊ)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (ÄÕÖÅ ÇÁÒÎÉÊ)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (ÇÁÒÎÉÊ)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "äÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÕ ÐÒɤÄÎÁÎÏ ÍÉÛÕ?"
-
-#~ msgid "Czech"
-#~ msgstr "þÅÓØËÁ"
-
-#~ msgid "Slovakian"
-#~ msgstr "óÌÏ×ÁÃØËÁ"
-
-#~ msgid ""
-#~ " Introduction\n"
-#~ "\n"
-#~ "The operating system and the different components available in the "
-#~ "Mandrake Linux distribution \n"
-#~ "shall be called the \"Software Products\" hereafter. The Software "
-#~ "Products include, but are not \n"
-#~ "restricted to, the set of programs, methods, rules and documentation "
-#~ "related to the operating \n"
-#~ "system and the different components of the Mandrake Linux distribution.\n"
-#~ "\n"
-#~ "\n"
-#~ "1. License Agreement\n"
-#~ "\n"
-#~ "Please read carefully this document. This document is a license agreement "
-#~ "between you and  \n"
-#~ "MandrakeSoft S.A., 42, rue d'Aboukir, 75002 Paris - France, which applies "
-#~ "to the Software Products.\n"
-#~ "By installing, duplicating or using the Software Products in any manner, "
-#~ "you explicitly \n"
-#~ "accept and fully agree to conform to the terms and conditions of this "
-#~ "License. \n"
-#~ "If you disagree with any portion of the License, you are not allowed to "
-#~ "install, duplicate or use \n"
-#~ "the Software Products. \n"
-#~ "Any attempt to install, duplicate or use the Software Products in a "
-#~ "manner which does not comply \n"
-#~ "with the terms and conditions of this License is void and will terminate "
-#~ "your rights under this \n"
-#~ "License. Upon termination of the License,  you must immediately destroy "
-#~ "all copies of the \n"
-#~ "Software Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "2. The GPL License and Related Licenses\n"
-#~ "\n"
-#~ "The Software Products consist of components created by different persons "
-#~ "or entities.  Most \n"
-#~ "of these components are governed under the terms and conditions of the "
-#~ "GNU General Public \n"
-#~ "Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-#~ "licenses allow you to use, \n"
-#~ "duplicate, adapt or redistribute the components which they cover. Please "
-#~ "read carefully the terms \n"
-#~ "and conditions of the license agreement for each component before using "
-#~ "any component. Any question \n"
-#~ "on a component license should be addressed to the component author and "
-#~ "not to MandrakeSoft.\n"
-#~ "The programs developed by MandrakeSoft S.A. are governed by the GPL "
-#~ "License. Documentation written \n"
-#~ "by MandrakeSoft S.A. is governed by a specific license. Please refer to "
-#~ "the documentation for \n"
-#~ "further details.\n"
-#~ "Some versions of the Software Products may contain components which are "
-#~ "not governed by the GPL \n"
-#~ "License or similar agreements. Each such component is then governed by "
-#~ "the terms and conditions \n"
-#~ "of its own specific license. Please read carefully and comply with such "
-#~ "specific licenses before \n"
-#~ "you install, use or redistribute the said components. Such licenses will "
-#~ "in general prevent the \n"
-#~ "transfer,  duplication (except for backup purposes), redistribution, "
-#~ "reverse engineering, \n"
-#~ "de-assembly, \n"
-#~ "de-compilation or modification of the component. Any breach of agreement "
-#~ "will immediately terminate \n"
-#~ "your rights under the specific license. Unless the specific license terms "
-#~ "grant you such rights, \n"
-#~ "you usually cannot install the programs on more than one system, or adapt "
-#~ "it to be used on a \n"
-#~ "network. \n"
-#~ "In doubt, please contact directly the distributor or editor of the "
-#~ "component. Transfer to third \n"
-#~ "parties or copying of such components including the documentation is "
-#~ "usually forbidden.\n"
-#~ "\n"
-#~ "\n"
-#~ "3. Intellectual Property Rights\n"
-#~ "\n"
-#~ "All rights to the components of the Software Products belong to their "
-#~ "respective authors and are \n"
-#~ "protected by intellectual property and copyright laws applicable to "
-#~ "software programs.\n"
-#~ "MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-#~ "Products, as a whole or in \n"
-#~ "parts,\n"
-#~ "by all means and for all purposes.\n"
-#~ "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-#~ "MandrakeSoft S.A.  All rights \n"
-#~ "are \n"
-#~ "reserved. The duplication is forbidden without prior written consent by "
-#~ "MandrakeSoft S.A.\n"
-#~ "\n"
-#~ "\n"
-#~ "4. Limited Warranty\n"
-#~ "\n"
-#~ "The Software Products and attached documentation are provided \"as is\", "
-#~ "with no warranty, to the \n"
-#~ "extent permitted by law. Should the Software Products be defective, "
-#~ "MandrakeSoft S.A. will at its \n"
-#~ "own will either replace the Software Products, or reimburse the paid "
-#~ "fee.\n"
-#~ "This limited warranty is void if you fail to comply to the "
-#~ "recommendations, instructions and \n"
-#~ "conditions \n"
-#~ "of use listed in the documentation or license agreements of the Software "
-#~ "Products.\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. will in no "
-#~ "circumstances be liable for any \n"
-#~ "special, \n"
-#~ "incidental, direct or indirect damages whatsoever (including without "
-#~ "limitation damages for loss of \n"
-#~ "business, interruption of business, financial loss, legal fees and "
-#~ "penalties resulting from a court \n"
-#~ "judgement, or any other consequential loss) arising out of  the use or "
-#~ "inability to use the \n"
-#~ "Software \n"
-#~ "Products, even if MandrakeSoft S.A. has been advised of the possibility "
-#~ "or occurance of such \n"
-#~ "damages.\n"
-#~ "\n"
-#~ "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN "
-#~ "SOME COUNTRIES\n"
-#~ "\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. or its distributors "
-#~ "will, in no circumstances, be \n"
-#~ "liable for any special, incidental, direct or indirect damages whatsoever "
-#~ "(including without \n"
-#~ "limitation \n"
-#~ "damages for loss of business, interruption of business, financial loss, "
-#~ "legal fees and penalties \n"
-#~ "resulting from a court judgement, or any other consequential loss) "
-#~ "arising out of the possession \n"
-#~ "and \n"
-#~ "use of software components or arising out of  downloading software "
-#~ "components from one of \n"
-#~ "Mandrake Linux \n"
-#~ "sites  which are prohibited or restricted in some countries by local "
-#~ "laws. This limited liability \n"
-#~ "applies to, but is not restricted to, the strong cryptography components "
-#~ "included in the Software \n"
-#~ "Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "5. Governing Laws \n"
-#~ "\n"
-#~ "If any portion of this agreement is held void, illegal or inapplicable by "
-#~ "a court judgement, this \n"
-#~ "portion is excluded from this contract. You remain bound by the other "
-#~ "applicable sections of the \n"
-#~ "agreement.\n"
-#~ "The terms and conditions of this License are governed by the Laws of "
-#~ "France.\n"
-#~ "All disputes on the terms of this license will preferably be settled out "
-#~ "of court. As a last \n"
-#~ "resort, \n"
-#~ "the dispute will be referred to the appropriate Courts of Law of Paris - "
-#~ "France.\n"
-#~ "For any question on this document, please contact MandrakeSoft S.A.,  \n"
-#~ "42, rue d'Aboukir, 75002 Paris - France\n"
-#~ msgstr ""
-#~ "÷ÓÔÕÐ\n"
-#~ "\n"
-#~ "ïÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ ÔÁ Ò¦ÚÎÏÍÁΦÔΦ ÓËÌÁÄÏצ ËÏÍÐÏÎÅÎÔÉ × ÄÉÓÔÒÉÂÕÔÉצ\n"
-#~ "íÁÎÄÒÅÊË ì¦ÎÁËÓÁ ÄÁ̦ ÂÕÄÕÔØ Ú×ÁÔÉÓÑ \"ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ \". ðÒÏÇÒÁÍΦ\n"
-#~ "ÐÒÏÄÕËÔÉ ×ËÌÀÞÁÀÔØ ÁÌÅ ÎÅ ÏÂÍÅÖÕÀÔØÓÑ ÎÁÂÏÒÁÍÉ ÐÒÏÇÒÁÍ, ÍÅÔÏĦ×,\n"
-#~ "ÐÒÁ×ÉÌ ÔÁ ÄÏËÕÍÅÎÔÁæ¤À, Ñ˦ ÍÁÀÔØ ×¦ÄÎÏÛÅÎÎÑ ÄÏ ÏÐÅÒÁæÊÎϧ ÓÉÓÔÅÍÉ\n"
-#~ "ÔÁ Ò¦ÚÎÉÈ ÓËÌÁÄÏ×ÉÈ ÞÁÓÔÉÎ ÄÉÓÔÒÉÂÕÔÉ×Á íÁÎÄÒÅÊË ì¦ÎÁËÓ.\n"
-#~ "\n"
-#~ "1. ì¦ÃÅÎÚ¦ÊÎÁ ÚÇÏÄÁ\n"
-#~ "\n"
-#~ "ðÒÏÞÉÔÁÊÔÅ, ÂÕÄØ-ÌÁÓËÁ, Õ×ÁÖÎÏ ÃÅÊ ÄÏËÕÍÅÎÔ. ãÅÊ ÄÏËÕÍÅÎÔ - ÚÇÏÄÁ ÐÒÏ\n"
-#~ "̦ÃÅÎÚÕ×ÁÎÎÑ Í¦Ö ÷ÁÍÉ ÔÁ ËÏÍÐÁΦ¤À MandrakeSoft S.A., 42, rue\n"
-#~ "d'Aboukir, 75002 Paris - France, ÑËÁ ÚÁÓÔÏÓÏ×Õ¤ÔØÓÑ ÄÏ ðÒÏÇÒÁÍÎÉÈ\n"
-#~ "ÐÒÏÄÕËÔ¦×. ÷ÓÔÁÎÏ×ÌÀÀÞÉ, ÄÕÂÌÀÀÞÉ ÞÉ ×ÉËÏÒÉÓÔÏ×ÕÀÞÉ ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ\n"
-#~ "ÂÕÄØ-ÑËÉÍ ÞÉÎÏÍ ÷É ÔÉÍ ÓÁÍÉÍ Ñ×ÎÉÍ ÞÉÎÏÍ ÐÒÉÊÍÁ¤ÔÅ ÔÁ ÐÏ×ΦÓÔÀ\n"
-#~ "ÐÏÇÏÄÖÕ¤ÔÅÓØ ÐÒÉÔÒÉÍÕ×ÁÔÉÓØ ÕÍÏ× ÄÁÎϧ ì¦ÃÅÎÚ¦§. ñËÝÏ ÷É ÎÅ\n"
-#~ "ÐÏÇÏÄÖÕ¤ÔÅÓØ Ú ÂÕÄØ-ÑËÉÍ ÐÏÌÏÖÅÎÎÑÍ Ã¦¤§ ì¦ÃÅÎÚ¦§, ÷ÁÍ ÎÅ ÄÏÚ×ÏÌѤÔØÓÑ\n"
-#~ "×ÓÔÁÎÏ×ÌÀ×ÁÔÉ, ÄÕÂÌÀ×ÁÔÉ ÞÉ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ðÒÏÇÒÁÍΦ\n"
-#~ "ÐÒÏÄÕËÔÉ. âÕÄØ-ÑËÁ ÓÐÒÏÂÁ ×ÓÔÁÎÏ×ÉÔÉ, ÄÕÂÌÀ×ÁÔÉ ÞÉ ×ÉËÏÒÉÓÔÁÔÉ\n"
-#~ "ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÞÉÎÏÍ, ÑËÉÊ ÎÅ ÐÅÒÅÄÂÁÞÅÎÉÊ ÕÍÏ×ÁÍÉ Ã¦¤§ ì¦ÃÅÎÚ¦§\n"
-#~ "×ÅÄÅ ÄÏ ×ÔÒÁÔÉ ÐÒÁ× ÝÏÄÏ Ã¦¤§ ì¦ÃÅÎÚ¦§. ðÒÉ ÐÒÉÐÉÎÅÎΦ ì¦ÃÅÎÚ¦§ ÷É\n"
-#~ "ÐÏ×ÉÎΦ צÄÒÁÚÕ-Ö ÚÎÉÝÉÔÉ ×Ó¦ ËÏЦ§ ðÒÏÇÒÁÍÎÏÇÏ ÐÒÏÄÕËÔÕ.\n"
-#~ "\n"
-#~ "2. ì¦ÃÅÎÚ¦Ñ GPL ÔÁ ¦ÎÛ¦ ÐÏĦÂΦ ̦ÃÅÎÚ¦§\n"
-#~ "\n"
-#~ "ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÓËÌÁÄÁÀÔØÓÑ Ú ËÏÍÐÏÎÅÎÔ¦×, Ñ˦ ÒÏÚÒÏÂÌÅΦ Ò¦ÚÎÉÍÉ\n"
-#~ "ÏÓÏÂÁÍÉ ÞÉ ÏÒÇÁΦÚÁæÑÍÉ. â¦ÌØÛ¦ÓÔØ ÃÉÈ ÓËÌÁÄÏ×ÉÈ ÞÁÓÔÉÎ ÒÅÇÕÌÀÀÔØÓÑ\n"
-#~ "ÔÅÒͦÎÁÍÉ ÔÁ ÕÍÏ×ÁÍÉ úÁÇÁÌØÎϧ ðÕÂ̦ÞÎϧ ì¦ÃÅÎÚ¦§ GNU (GNU General\n"
-#~ "Public Licence), ÑËÁ ÄÁ̦ × ÃØÏÍÕ ÔÅËÓÔ¦ Ú×ÅÔØÓÑ \"GPL\", ÁÂÏ ¦ÎÛÉÍÉ\n"
-#~ "ÐÏĦÂÎÉÍÉ Ì¦ÃÅÎÚ¦ÑÍÉ. â¦ÌØÛ¦ÓÔØ Ú ÃÉÈ Ì¦ÃÅÎÚ¦Ê ÄÏÚ×ÏÌÑÀÔØ\n"
-#~ "×ÉËÏÒÉÓÔÁÎÎÑ, ÄÕÂÌÀ×ÁÎÎÑ, ÐÒÉÊÎÑÔÔÑ ÔÁ ÐÅÒÅÒÏÚÐÏ×ÓÀÄÖÅÎÎÑ ÓËÌÁÄÏ×ÉÈ\n"
-#~ "ÞÁÓÔÉÎ, Ñ˦ ×ÏÎÉ ÒÅÇÕÌÀÀÔØ. âÕÄØ-ÌÁÓËÁ, ÏÚÎÁÊÏÍÔÅÓØ Õ×ÁÖÎÏ Ú ÔÅÒͦÎÁÍÉ\n"
-#~ "ÔÁ ÕÍÏ×ÁÍÉ Ì¦ÃÅÎÚ¦ÊÎÉÈ ÕÍÏ× ÄÌÑ ËÏÖÎϧ ÓËÌÁÄÏ×ϧ ÞÁÓÔÉÎÉ ÐÅÒÛ, ΦÖ\n"
-#~ "×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÂÕÄØ-ÑËÕ Ú ÞÁÓÔÉÎ. âÕÄØ-Ñ˦ ÚÁÐÉÔÁÎÎÑ ÓÔÏÓÏ×ÎÏ\n"
-#~ "̦ÃÅÎÚ¦§ ÎÁ ÏËÒÅÍÕ ÓËÌÁÄÏ×Õ ÞÁÓÔÉÎÕ ÍÁÀÔØ ÁÄÒÅÓÕ×ÁÔÉÓÑ Á×ÔÏÒÕ Ã¦¤§\n"
-#~ "ÓËÌÁÄÏ×ϧ ÞÁÓÔÉÎÉ, Á ÎÅ ÄÏ MandrakeSoft. ðÒÏÇÒÁÍÉ, ÒÏÚÒÏÂÌÅΦ\n"
-#~ "MandrakeSoft S.A. ËÅÒÕÀÔØÓÑ Ì¦ÃÅÎÚ¦¤À GPL. äÏËÕÍÅÎÔÁæÑ, ÒÏÚÒÏÂÌÅÎÁ\n"
-#~ "MandrakeSoft S.A. ËÅÒÕ¤ÔØÓÑ ÓÐÅæÁÌØÎÏÀ ̦ÃÅÎÚ¦¤À. ú×ÅÒΦÔØÓÑ,\n"
-#~ "ÂÕÄØ-ÌÁÓËÁ, ÄÏ ÄÏËÕÍÅÎÔÁæ§ ÚÁ ÄÏÄÁÔËÏ×ÉÍÉ ÐÏÄÒÏÂÉÃÑÍÉ. äÅÑ˦ ×ÅÒÓ¦§\n"
-#~ "ÐÒÏÇÒÁÍÎÉÈ ÐÒÏÄÕËÔ¦× ÍÏÖÕÔØ Í¦ÓÔÉÔÉ ÓËÌÁÄÏצ, Ñ˦ ÎÅ ËÅÒÕÀÔØÓÑ\n"
-#~ "ì¦ÃÅÎÚ¦¤À GPL ÞÉ ÐÏĦÂÎÉÍÉ ÕÇÏÄÁÍÉ. ëÏÖÎÁ ÔÁËÁ ÓËÌÁÄÏ×Á ÞÁÓÔÉÎÁ\n"
-#~ "ËÅÒÕ¤ÔØÓÑ ÔÅÒͦÎÁÍÉ ÔÁ ÕÍÏ×ÁÍÉ Ó×Ϥ§ ÓÐÅÃÉƦÞÎϧ ̦ÃÅÎÚ¦§. âÕÄØ-ÌÁÓËÁ,\n"
-#~ "Õ×ÁÖÎÏ ÐÒÏÞÉÔÁÊÔÅ ÔÁ ÄÏÔÒÉÍÕÊÔÅÓØ ÕÍÏ× ÔÁËϧ ÓÐÅÃÉƦÞÎϧ ÕÇÏÄÉ ÐÅÒÛ,\n"
-#~ "Î¦Ö ÕÓÔÁÎÏ×ÌÀ×ÁÔÉ, ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÞÉ ÐÅÒÅÒÏÚÐÏ×ÓÀÄÖÕ×ÁÔÉ ÔÁ˦\n"
-#~ "ËÏÍÐÏÎÅÎÔÉ. úÁÇÁÌÏÍ ÔÁ˦ ̦ÃÅÎÚ¦§ ÂÕÄÕÔØ ÚÁÐÅÒÅÞÕ×ÁÔÉ ÐÒÁ×Ï ÐÅÒÅÎÏÓÕ,\n"
-#~ "ÄÕÂÌÀ×ÁÎÎÑ (ËÒ¦Í ÑË Ú ÍÅÔÏÀ ÓÔ×ÏÒÅÎÎÑ ÒÅÚÅÒ×Îϧ ËÏЦ§),\n"
-#~ "ÐÅÒÅÒÏÚÐÏ×ÓÀÄÖÅÎÎÑ, Ú×ÏÒÏÔÎÀ ¦ÎÖÅÎÅÒ¦À, ÄÅ-ÁÓÅÍÂÌÀ×ÁÎÎÑ, ÄÅ-ËÏÍЦÌÑæÀ\n"
-#~ "ÞÉ ÚͦÎÕ ÔÁËÏÇÏ ËÏÍÐÏÎÅÎÔÁ. âÕÄØ-ÑËÅ ÐÏÒÕÛÅÎÎÑ ÕÍÏ× Ì¦ÃÅÎÚ¦§ ÐÏÚÂÁ×ÌѤ\n"
-#~ "÷ÁÓ ÐÒÁ× ÚÁ ÕÍÏ×ÁÍÉ Ì¦ÃÅÎÚ¦§. ëÒ¦Í ×ÉÐÁÄ˦×, ÓÐÅæÁÌØÎÏ ×ËÁÚÁÎÉÈ\n"
-#~ "ÕÍÏ×ÁÍÉ Ì¦ÃÅÎÚ¦§, ÷ÁÍ ÎÅ ÄÏÚ×ÏÌѤÔØÓÑ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÐÒÏÇÒÁÍÉ ÎÁ\n"
-#~ "¦ÌØÛÅ, Î¦Ö ÏÄÎ¦Ê ÓÉÓÔÅͦ, ÁÂÏ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ §§ ÄÌÑ ×ÉËÏÒÉÓÔÁÎÎÑ ×\n"
-#~ "ÍÅÒÅÖ¦. ñËÝÏ ÷É ÓÕÍΦ×Á¤ÔÅÓØ ÝÏÄÏ ÔÅÒͦΦ×, ÂÕÄØ-ÌÁÓËÁ, Ú×ÅÒΦÔØÓÑ\n"
-#~ "ÂÅÚÐÏÓÅÒÅÄÎØÏ ÄÏ ÄÉÓÔÒÉÂÀÔÏÒÁ ÞÉ ÒÅÄÁËÔÏÒÁ ËÏÍÐÏÎÅÎÔÉ. ðÅÒÅÎ¦Ó ÄÏ\n"
-#~ "ÔÒÅÔ¦È ÐÁÒÔ¦Ê ÞÉ ËÏЦÀ×ÁÎÎÑ ÔÁËÉÈ ËÏÍÐÏÎÅÎÔ, Ú ÄÏËÕÍÅÎÔÁæ¤À ×ËÌÀÞÎÏ\n"
-#~ "Ú×ÉÞÁÊÎÏ ÚÁÂÏÒÏÎÅÎÏ.\n"
-#~ "\n"
-#~ "3. ðÒÁ×Á ¦ÎÔÅÌÅËÔÕÁÌØÎϧ ×ÌÁÓÎÏÓÔ¦\n"
-#~ "\n"
-#~ "÷Ó¦ ÐÒÁ×Á ÎÁ ÓËÌÁÄÏצ ËÏÍÐÏÎÅÎÔÉ ðÒÏÇÒÁÍÎÉÈ ÐÒÏÄÕËÔ¦× ÎÁÌÅÖÁÔØ\n"
-#~ "צÄÐÏצÄÎÉÍ Á×ÔÏÒÁÍ ¦ ÚÁÈÉÝÅΦ ÚÁËÏÎÁÍÉ ÐÒÏ ¦ÎÔÅÌÅËÔÕÁÌØÎÕ ×ÌÁÓΦÓÔØ\n"
-#~ "ÔÁ ÐÒÁ×Á ÎÁ ËÏЦÀ×ÁÎÎÑ, Ñ˦ ÍÁÀÔØ ÚÁÓÔÏÓÕ×ÁÎÎÑ ÄÏ ÐÒÏÇÒÁÍÎÏÇÏ\n"
-#~ "ÚÁÂÅÚÐÅÞÅÎÎÑ. MandrakeSoft S.A. ÚÁÌÉÛÁ¤ ÚÁ ÓÏÂÏÀ ÐÒÁ×Ï ÚͦÎÀ×ÁÔÉ ÞÉ\n"
-#~ "ÁÄÁÐÔÕ×ÁÔÉ ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÑË × Ã¦ÌÏÍÕ, ÔÁË ¦ ÏËÒÅÍÉÍÉ ÞÁÓÔÉÎÁÍÉ Ú\n"
-#~ "ÂÕÄØ-ÑËÏÀ ÍÅÔÏÀ ¦ ÄÌÑ ÂÕÄØ-ÑËÉÈ Ã¦ÌÅÊ. \"Mandrake\", \"Mandrake Linux\" "
-#~ "ÔÁ\n"
-#~ "צÄÐÏצÄΦ ÌÏÇÏÔÉÐÉ ¤ ÔÏÒǦ×ÅÌØÎÉÍÉ ÍÁÒËÁÍÉ MandarakeSoft\n"
-#~ "S.A. äÕÂÌÀ×ÁÎÎÑ ÚÁÂÏÒÏÎÅÎÏ ÂÅÚ ÐÏÐÅÒÅÄÎØϧ ÐÉÓØÍÏ×ϧ ÕÇÏÄÉ Ú\n"
-#~ "MandrakeSoft S.A.\n"
-#~ "\n"
-#~ "4. ïÂÍÅÖÅÎÁ צÄÐÏצÄÁÌØΦÓÔØ\n"
-#~ "\n"
-#~ "ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÔÁ ÄÏÄÁÎÁ ÄÏËÕÍÅÎÔÁÃ¦Ñ ÎÁÄÁÀÔØÓÑ ÎÁ ÕÍÏ×ÁÈ \"ÑË ¤\",\n"
-#~ "ÂÅÚ ÇÁÒÁÎÔ¦Ê, ÏÂÍÅÖÕÀÞÉÓØ ×¦ÄÐÏצÄÎÉÍÉ ÚÁËÏÎÁÍÉ. õ ×ÉÐÁÄËÕ, ËÏÌÉ\n"
-#~ "ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ×ÉÑ×ÌÑÔØÓÑ ÄÅÆÅËÔÎÉÍÉ, MandrakeSoft S.A. ×ÌÁÓÎÉÍ\n"
-#~ "ËÏÛÔÏÍ ÁÂÏ ÚÁͦÎÉÔØ ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ, ÁÂÏ ×¦ÄÛËÏÄÕ¤ §È ×ÁÒÔ¦ÓÔØ. ãÑ\n"
-#~ "ÏÂÍÅÖÅÎÁ צÄÐÏצÄÁÌØΦÓÔØ ÐÅÒÅÓÔÁ¤ ĦÑÔÉ × ÒÁÚ¦, ËÏÌÉ ÷É ÎÅ\n"
-#~ "ÄÏÔÒÉÍÕ¤ÔÅÓØ ÒÅËÏÍÅÎÄÁæÊ, ¦ÎÓÔÒÕËÃ¦Ê ÞÉ ÕÍÏ× ×ÉËÏÒÉÓÔÁÎÎÑ ÐÅÒÅ̦ÞÅÎÉÈ\n"
-#~ "× ÄÏËÕÍÅÎÔÁæ§ ÔÁ ÕÍÏצ ̦ÃÅÎÚÕ×ÁÎÎÑ ðÒÏÇÒÁÍÎÉÈ ÐÒÏÄÕËÔ¦×. ÷ ÍÅÖÁÈ,\n"
-#~ "Ñ˦ ÄÏÚ×ÏÌѤ ÚÁËÏÎÏÄÁ×ÓÔ×Ï, MandrakeSoft S.A. Φ ÚÁ ÑËÉÈ ÕÍÏ× ÎÅ\n"
-#~ "ÐÒÉÊÍÁ¤ ÎÁ ÓÅŠצÄÐÏצÄÁÌØÎÏÓÔ¦ ÚÁ ÓÐÅæÁÌØΦ, ×ÉÐÁÄËÏצ, ÐÒÑͦ ÞÉ\n"
-#~ "ÏÐÏÓÅÒÅÄËÏ×ÁΦ ×ÔÒÁÔÉ (×ËÌÀÞÁÀÞÉ ×ÔÒÁÔÕ Â¦ÚÎÅÓÕ, ÐÅÒÅÒ×É Â¦ÚÎÅÓÕ,\n"
-#~ "ƦÎÁÎÓÏצ ×ÔÒÁÔÉ, ÓÕÄÏצ ×ÉÔÒÁÔÉ ÔÁ ÛÔÒÁÆÉ, Ñ˦ ¤ ÒÅÚÕÌØÔÁÔÁÍÉ\n"
-#~ "ÂÕÄØ-ÑËÉÈ ÓÕÄÏ×ÉÈ ÒÏÚÇÌÑĦ×, ÞÉ ÂÕÄØ-Ñ˦ ×ÔÒÁÔÉ, ÝÏ ×¦Ä ÎÉÈ ÐÏÈÏÄÑÔØ),\n"
-#~ "Ñ˦ ×ÉËÌÉËÁΦ ×ÉËÏÒÉÓÔÁÎÎÑÍ ÞÉ ÎÅÍÏÖÌÉצÓÔÀ ×ÉËÏÒÉÓÔÁÎÎÑ ðÒÏÇÒÁÍÎÉÈ\n"
-#~ "ÐÒÏÄÕËÔ¦×, ÎÁצÔØ ÑËÝÏ MandrakeSoft S.A. ÂÕ× ÐÏÐÅÒÅÄÎØÏ ÐÏצÄÏÍÌÅÎÉÊ\n"
-#~ "ÐÒÏ ÍÏÖÌÉצÓÔØ ÔÁËÉÈ ×ÔÒÁÔ.\n"
-#~ "\n"
-#~ "ïâíåöåîá ÷¶äðï÷¶äïáìøî¶óôø ú÷'ñúáîá ú ÷ïìïä¶îîñí þé ÷éëïòéóôáîîñí\n"
-#~ "úáâïòïîåîïçï ðòïçòáíîïçï úáâåúðåþåîîñ ÷ äåñëéè ëòá·îáè\n"
-#~ "\n"
-#~ "÷ ÍÅÖÁÈ, Ñ˦ ÄÏÚ×ÏÌѤ ÚÁËÏÎÏÄÁ×ÓÔ×Ï, MandrakeSoft S.A. ÞÉ ÊÏÇÏ\n"
-#~ "ÄÉÓÔÒÉÂÀÔÏÒÉ Î¦ ÚÁ ÑËÉÈ ÕÍÏ× ÎÅ ÐÒÉÊÍÁ¤ ÎÁ ÓÅŠצÄÐÏצÄÁÌØÎÏÓÔ¦ ÚÁ\n"
-#~ "ÓÐÅæÁÌØΦ, ×ÉÐÁÄËÏצ, ÐÒÑͦ ÞÉ ÏÐÏÓÅÒÅÄËÏ×ÁΦ ×ÔÒÁÔÉ (×ËÌÀÞÁÀÞÉ\n"
-#~ "×ÔÒÁÔÕ Â¦ÚÎÅÓÕ, ÐÅÒÅÒ×É Â¦ÚÎÅÓÕ, ƦÎÁÎÓÏצ ×ÔÒÁÔÉ, ÓÕÄÏצ ×ÉÔÒÁÔÉ ÔÁ\n"
-#~ "ÛÔÒÁÆÉ, Ñ˦ ¤ ÒÅÚÕÌØÔÁÔÁÍÉ ÂÕÄØ-ÑËÉÈ ÓÕÄÏ×ÉÈ ÒÏÚÇÌÑĦ×, ÞÉ ÂÕÄØ-Ñ˦\n"
-#~ "×ÔÒÁÔÉ, ÝÏ ×¦Ä ÎÉÈ ÐÏÈÏÄÑÔØ), Ñ˦ ×ÉËÌÉËÁΦ ×ÏÌÏĦÎÎÑÍ ÔÁ ×ËÏÒÉÓÔÁÎÎÑÍ\n"
-#~ "ÐÒÏÇÒÁÍÎÉÈ ÓËÌÁÄÏ×ÉÈ ÞÁÓÔÉÎ, ÞÉ ×ÉËÌÉËÁΦ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ ÐÒÏÇÒÁÍÎÉÈ\n"
-#~ "ËÏÍÐÏÎÅÎÔ Ú ÏÄÎÏÇÏ Ú ÓÁÊÔ¦× Mandrake Linux, Ñ˦ ÚÁÂÏÒÏÎÅΦ ÞÉ ÏÂÍÅÖÅΦ\n"
-#~ "× ×ÉËÏÒÉÓÔÁÎΦ × ÄÅÑËÉÈ ËÒÁ§ÎÁÈ Í¦ÓÃÅ×ÉÍ ÚÁËÏÎÏÄÁ×ÓÔ×ÏÍ. ãÅ ÏÂÍÅÖÅÎÁ\n"
-#~ "צÄÐÏצÄÁÌØΦÓÔØ ÚÁÓÔÏÓÏ×Õ¤ÔØÓÑ ÁÌÅ ÎÅ ÏÂÍÅÖÕ¤ÔØÓÑ ÓÉÌØÎÉÍÉ\n"
-#~ "ËÒÉÐÔÏÇÒÁƦÞÎÉÍÉ ÓÉÓÔÅÍÁÍÉ, Ñ˦ ×ËÌÀÞÅΦ × ÓËÌÁÄ ðÒÏÇÒÁÍÎÉÈ\n"
-#~ "ÐÒÏÄÕËÔ¦×.\n"
-#~ "\n"
-#~ "5. úÁËÏÎÏÄÁ×ÓÔ×Ï\n"
-#~ "\n"
-#~ "ñËÝÏ ÂÕÄØ-ÑËÉÊ ÒÏÚÄ¦Ì Ã¦¤§ ÕÇÏÄÉ ÐÒÉÚÎÁÎÉÊ ÎÅĦÊÓÎÉÍ, ÔÁËÉÍ, ÝÏ ÎÅ\n"
-#~ "צÄÐÏצÄÁ¤ ÚÁËÏÎÏÄÁ×ÓÔ×Õ ÞÉ ÎÅצÄÐÏצÄÎÉÍ ÝÏÄÏ ÓÕÄÏ×ϧ ÐÏÓÔÁÎÏ×É, ÃÅÊ\n"
-#~ "ÒÏÚÄ¦Ì ÕÇÏÄÉ ×ÉÄÁÌѤÔØÓÑ Ú ÄÁÎÏÇÏ ËÏÎÔÒÁËÔÕ. ÷É ÚÁÌÉÛÁ¤ÔÅÓØ Ú×'ÑÚÁÎÉÍÉ\n"
-#~ "¦ÎÛÉÍÉ ÓÅËæÑÍÉ Ã¦¤§ ÕÇÏÄÉ, Ñ˦ ÝÅ ÍÁÀÔØ ÚÁÓÔÏÓÕ×ÁÎÎÑ. ôÅÒͦÎÉ ÔÁ\n"
-#~ "ÕÍÏ×É Ã¦¤§ ì¦ÃÅÎÚ¦§ ËÅÒÕÀÔØÓÑ úÁËÏÎÏÄÁ×ÓÔ×ÏÍ æÒÁÎæ§. ÷Ó¦ ÓЦÒΦ\n"
-#~ "ÐÉÔÁÎÎÑ ÝÏÄÏ ÔÅÒÍ¦Î¦× ÔÁ ÕÍÏ× Ã¦¤§ ̦ÃÅÎÚ¦§ ÂÕÄÕÔØ ÒÏÚ×'ÑÚÕ×ÁÔÉÓÑ ÐÏ\n"
-#~ "ÍÏÖÌÉ×ÏÓÔ¦ ÐÏÚÁ ÍÅÖÁÍÉ ÓÕÄÏ×ÉÈ ÕÓÔÁÎÏ×. ÷ ËÒÁÊÎ¦È ×ÉÐÁÄËÁÈ ÓЦÒΦ\n"
-#~ "ÐÉÔÁÎÎÑ ÂÕÄÕÔØ ×ÉÒ¦ÛÕ×ÁÔÉÓÑ ×¦ÄÐÏצÄÎÉÍ úÁËÏÎÎÉÍ óÕÄÏÍ ðÁÒÉÖÁ -\n"
-#~ "æÒÁÎæÑ.  \n"
-#~ "ú ÂÕÄØ-ÑËÉÍÉ ÐÉÔÁÎÎÑÍÉ ÝÏÄÏ ÃØÏÇÏ ÄÏËÕÍÅÎÔÁ Ú×ÅÒÔÁÊÔÅÓÑ, ÂÕÄØ-ÌÁÓËÁ,\n"
-#~ "ÄÏ MandrakeSoft S.A., 42, rue d'Aboukir, 75002 Paris - France\n"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "þÁÓ (× ÓÅË) ÎÅÁËÔÉ×ÎÏÓÔ¦, ЦÓÌÑ ÑËϧ\n"
-#~ "צÛÁ¤ÔØÓÑ ÔÒÕÂËÁ. (ÚÁÌÉÛÔÅ ÐÕÓÔÉÍ ÝÏ \n"
-#~ "ÚÁÂÏÒÏÎÉÔÉ ÃÅÊ ÒÅÖÉÍ)"
-
-#~ msgid "Germany"
-#~ msgstr "î¦ÍÅÞÞÉÎÁ"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "î¦ÍÅÞÞÉÎÁ (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "ýÏ ÷É ÈÏÞÅÔÅ ÚÒÏÂÉÔÉ?"
-
-#~ msgid "Connect to internet with a normal modem"
-#~ msgstr "ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ ÞÅÒÅÚ Ú×ÉÞÁÊÎÉÊ ÍÏÄÅÍ"
-
-#~ msgid "Connect to internet using ISDN"
-#~ msgstr "ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ ÞÅÒÅÚ ISDN"
-
-#~ msgid "Connect to internet using DSL (or ADSL)"
-#~ msgstr "ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ ÞÅÒÅÚ DSL (ÁÂÏ ADSL)"
-
-#~ msgid "Connect to internet using Cable"
-#~ msgstr "ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ ÞÅÒÅÚ ËÁÂÅÌØÎÅ Ú'¤ÄÎÁÎÎÑ"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "óÔ×ÏÒÉÔÉ ÎÏ×Õ ËÏÎƦÇÕÒÁæÀ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "÷ÁÛ ËÏÍÐ'ÀÔÅÒ ÍÏÖÎÁ ÎÁÓÔÒϧÔÉ ÄÌÑ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú "
-#~ "¦ÎÔÅÒÎÅÔÏÍ.\n"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "îÅ ÍÏÖÕ ×ÓÔÁÎÏ×ÉÔÉ RPM ÄÌÑ ipchains ÚÁ ÄÏÐÏÍÏÇÏÀ urpmi."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "îÅ ÍÏÖÕ ×ÓÔÁÎÏ×ÉÔÉ RPM ÄÌÑ dhcp ÚÁ ÄÏÐÏÍÏÇÏÀ urpmi."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "îÅ ÍÏÖÕ ×ÓÔÁÎÏ×ÉÔÉ RPM ÄÌÑ linuxconf ÚÁ ÄÏÐÏÍÏÇÏÀ urpmi."
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "îÅ ÍÏÖÕ ×ÓÔÁÎÏ×ÉÔÉ RPM ÄÌÑ bind ÚÁ ÄÏÐÏÍÏÇÏÀ urpmi."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "îÅ ÍÏÖÕ ×ÓÔÁÎÏ×ÉÔÉ RPM ÄÌÑ cahing-nameserver ÚÁ ÄÏÐÏÍÏÇÏÀ urpmi."
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "÷ÓÅ ÂÕÌÏ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ.\n"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "õÓÔÁÎÏ×ËÁ/÷¦ÄÎÏ×ÌÅÎÎÑ"
-
-#~ msgid "Rescue"
-#~ msgstr "÷¦ÄÎÏ×ÌÅÎÎÑ"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "ñËÉÊ ÔÉРЦÄÒÏÚĦÌÕ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ?"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "ñËÝÏ ÒÁΦÛÅ ÎÅ ÂÕÌÏ ×ÓÔÁÎÏ×ÌÅÎÏ ÖÏÄÎϧ ÓÉÓÔÅÍÉ Ú GNU/ì¦ÎÁËÓÏÍ ÁÂÏ ÑËÝÏ\n"
-#~ "÷É ÈÏÞÅÔÅ ÍÁÔÉ Ë¦ÌØËÁ Ò¦ÚÎÉÈ ×ÅÒÓ¦Ê ì¦ÎÁËÓÁ ×ÉÂÅÒ¦ÔØ \"õÓÔÁÎÏ×ËÁ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "÷ÉÂÅÒ¦ÔØ \"÷¦ÄÎÏ×ÌÅÎÎÑ\" ÑËÝÏ ÷É ÈÏÞÅÔŠצÄÎÏ×ÉÔÉ ×ÅÒÓ¦À íÁÎÄÒÅÊË\n"
-#~ "ì¦ÎÁËÓÁ, ÑËÁ ÂÕÌÁ ×ÖÅ ×ÓÔÁÎÏ×ÌÅÎÁ.\n"
-#~ "\n"
-#~ "÷ÉÂÅÒ¦ÔØ:\n"
-#~ "\n"
-#~ "  - òÅËÏÍÅÎÄÏ×ÁÎÉÊ: ñËÝÏ ÷É Î¦ËÏÌÉ ÄÏ ÃØÏÇÏ ÎÅ ×ÓÔÁÎÏ×ÌÀ×ÁÌÉ\n"
-#~ "    ì¦ÎÁËÓ.\n"
-#~ "\n"
-#~ "  - óÐÅæÁÌØÎÉÊ: ñËÝÏ ÷É ÚÎÁÊÏͦ Ú GNU/ì¦ÎÁËÓÏÍ, ÷É ÚÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ\n"
-#~ "    Ò¦×ÅÎØ ×ÉËÏÒÉÓÔÁÎÎÑ ÓÉÓÔÅÍÉ. äÉצÔØÓÑ ÐÏÄÒÏÂÉæ ÄÁ̦.\n"
-#~ "\n"
-#~ "  - åËÓÐÅÒÔ: ñËÝÏ ÷É ×¦ÌØÎÏ ÐÏÞÕ×Á¤ÔÅ × ÓÅÒÅÄÏ×Éݦ GNU/Linux ¦ ÈÏÞÅÔÅ\n"
-#~ "    ×ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ, ÔÁË ÑË ÷ÁÍ ÈÏÞÅÔØÓÑ. ôÁË ÓÁÍÏ, ÑË ¦ × ËÌÁÓ¦\n"
-#~ "    \"óÐÅæÁÌØÎÉÊ\" ÷É ÚÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ×ÉÓÏËÏ ÓÐÅæÁ̦ÚÏ×ÁÎÕ\n"
-#~ "    ÓÉÓÔÅÍÕ. áÌÅ, ÂÕÄØ-ÌÁÓËÁ, ÷éâéòáêôå ãåê òåöéí, ô¶ìøëé ñëýï ÷é äïâòå\n"
-#~ "    òïúõí¶´ôå, ýï ÷é òïâéôå!\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "úÁÒÁÚ ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ Ð¦ÄÒÏÚĦÌÉ ÎÁ ÄÉÓËÕ, ÄÅ ÷É ÂÕÄÅÔÅ\n"
-#~ "×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÷ÁÛÕ ÓÉÓÔÅÍÕ ì¦ÎÁËÓ-Mandrake, ÑËÝÏ ÔÁ˦ ÒÏÚĦÌÉ ×ÖÅ\n"
-#~ "×ÉÚÎÁÞÅΦ (×¦Ä ÐÏÐÅÒÅÄÎØϧ ÕÓÔÁÎÏ×ËÉ ì¦ÎÁËÓÁ ÁÂÏ ÑËÝÏ ÷É ÒÏÚĦÌÉÌÉ\n"
-#~ "ÄÉÓË ¦ÎÛÉÍÉ ÚÁÓÏÂÁÍÉ). ÷ ¦ÎÛÉÈ ×ÉÐÁÄËÁÈ ÷É ÐÏ×ÉÎΦ ÓÔ×ÏÒÉÔÉ ÒÏÚĦÌÉ ÎÁ\n"
-#~ "ÄÉÓËÕ. ãÑ ÏÐÅÒÁÃ¦Ñ ÒÏÚÐÏĦÌѤ ¤ÍΦÓÔØ ×Ó¦È ÄÉÓË¦× ËÏÍÐ'ÀÔÅÒÁ × Ë¦ÌØËÁ\n"
-#~ "ÏËÒÅÍÉÈ ÏÂÌÁÓÔÅÊ ÄÌÑ ×ÉËÏÒÉÓÔÁÎÎÑ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ñËÝÏ ÷ÁÍ ÔÒÅÂÁ ÓÔ×ÏÒÉÔÉ ÎÏצ ЦÄÒÏÚĦÌÉ, ÓËÏÒÉÓÔÁÊÔÅÓÑ ÒÅÖÉÍÏÍ\n"
-#~ "\"á×ÔÏÍÁÔÉÞÎÅ ×ÉÚÎÁÞÅÎÎÑ\" ÝÏ Á×ÔÏÍÁÔÉÞÎÏ ÓÔ×ÏÒÉÔÉ ÎÅÏÂȦÄΦ ÄÌÑ\n"
-#~ "ì¦ÎÁËÓÁ ЦÄÒÏÚĦÌÉ. ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÄÉÓË, ÄÌÑ ÒÏÚÐÏĦÌÕ ÎÁ\n"
-#~ "ЦÄÒÏÚĦÌÉ, ËÌÁÃÎÕ×ÛÉ ÎÁ \"hda\" ÝÏ ×ÉÂÒÁÔÉ ÐÅÒÛÉÊ ÄÉÓË ÔÉÐÕ IDE, \"hdb"
-#~ "\"\n"
-#~ "ÝÏ ×ÉÂÒÁÔÉ ÄÒÕÇÉÊ IDE ÄÉÓË, ÁÂÏ ËÌÁÃΦÔØ ÎÁ \"sda\" ÄÌÑ ×ÉÂÏÒÕ ÐÅÒÛÏÇÏ\n"
-#~ "SCSI ÄÉÓËÕ, ÔÏÝÏ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ä×Á ЦÄÒÏÚĦÌÉ, ÝÏ Ú×ÉÞÁÊÎÏ ÍÁÀÔØ ¦ÓÎÕ×ÁÔÉ, ÃÅ - ËÏÒÅÎÅ×Á ÆÁÊÌÏ×Á\n"
-#~ "ÓÉÓÔÅÁ (/), Ú ÑËϧ ÐÏÞÉÎÁ¤ÔØÓÑ ×ÓÑ ¦¤ÒÁÒÈ¦Ñ ÄÉÒÅËÔÏÒ¦Ê ÆÁÊÌÏ×ϧ\n"
-#~ "ÓÉÓÔÅÍÉ, ÔÁ ЦÄÒÏÚÄ¦Ì /boot, × ÑËÏÍÕ ÚÁÐÉÓÕÀÔØÓÑ ×Ó¦ ÆÁÊÌÉ, ÎÅÏÂȦÄΦ\n"
-#~ "ÄÌÑ ÔÏÇÏ, ÝÏ ËÏÍÐ'ÀÔÅÒ ÚÁ×ÁÎÔÁÖÉ×ÓÑ ÐÒÉ ×ÍÉËÁÎΦ.\n"
-#~ "\n"
-#~ "\n"
-#~ "úͦÎÉ ×¦Ä Ã¦¤§ ÏÐÅÒÁæ§ Ú×ÉÞÎÏ ÂÕ×ÁÀÔØ ÎÅÚ×ÏÒÏÔΦ. ôÏÍÕ ÐÏÄ¦Ì ÄÉÓËÕ\n"
-#~ "ÞÁÓÔÏ ÂÕ×Á¤ ÄÕÖÅ È×ÉÌÀÀÞÏÀ È×ÉÌÀÀÞÉÍ ÍÏÍÅÎÔÏÍ ÄÌÑ ÎÅÄÏÓצÄÞÅÎÏÇÏ\n"
-#~ "ËÏÒÉÓÔÕ×ÁÞÁ. DiskDrake ÚΦÍÁ¤ ÎÅÐÏÔÒ¦ÂÎÕ ÓËÌÁÄΦÓÔØ Ú ÃØÏÇÏ\n"
-#~ "ÐÒÏÃÅÓÕ. ú×ÅÒΦÔØÓÑ ÄÏ ÄÏËÕÍÅÎÔÁæ§ ¦ ÔÒÏÈÉ ×É×Þ¦ÔØ §§ ÐÅÒÛ, ΦÖ\n"
-#~ "ÐÒÉÓÔÕÐÁÔÉ ÄÏ ÃØÏÇÏ.\n"
-#~ "\n"
-#~ "\n"
-#~ "÷É ÍÏÖÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ËÌÁצÁÔÕÒÏÀ ÄÌÑ ×ÉËÏÎÁÎÎÑ ÏÐÅÒÁÃ¦Ê ÐÒÉ ÒÏÚĦ̦\n"
-#~ "ÄÉÓËÕ: ÐÅÒÅÈÏÄØÔÅ Ú ÏÄÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ ÎÁ ¦ÎÛÉÊ ÚÁ ÄÏÐÏÍÏÇÏÀ ËÌÁ×¦Û Tab\n"
-#~ "ÔÁ ÓÔÒ¦ÌÏË ×ÇÏÒÕ/×ÎÉÚ. ð¦ÓÌÑ ÔÏÇÏ, ÑË Ð¦ÄÒÏÚÄ¦Ì ×ÉÂÒÁÎÏ ÷É ÍÏÖÅÔÅ\n"
-#~ "ËÏÒÉÓÔÕ×ÁÔÉÓØ: \n"
-#~ "\n"
-#~ " - Ctrl-c ÄÌÑ ÓÔ×ÏÒÅÎÎÑ ÎÏ×ÏÇÏ Ð¦ÄÒÏÚĦÌÕ (ËÏÌÉ ×ÉÂÒÁÎÉÊ ÐÕÓÔÉÊ "
-#~ "ЦÄÒÏÚĦÌ)\n"
-#~ "\n"
-#~ " - Ctrl-d ÝÏ ÓÔÅÒÔÉ Ð¦ÄÒÏÚĦÌ\n"
-#~ "\n"
-#~ " - Ctrl-m ÝÏ ×ÓÔÁÎÏ×ÉÔÉ ÔÏÞËÕ ÍÏÎÔÕ×ÁÎÎÑ\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "÷Ó¦ Ô¦ ЦÄÒÏÚĦÌÉ, Ñ˦ ÂÕÌÉ ÒÏÚÐÏĦÌÅΦ ÎÁ ÐÏÐÅÒÅÄÎØÏÍÕ ÅÔÁЦ,\n"
-#~ "ÍÁÀÔØ ÂÕÔÉ ×¦ÄÆÏÒÍÁÔÏ×ÁΦ, ÐÅÒÛ, Î¦Ö ÎÉÍÉ ÍÏÖÎÁ ÂÕÄÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ\n"
-#~ "(ÆÏÒÍÁÔÕ×ÁÎÎÑ ÏÚÎÁÞÁ¤ ÓÔ×ÏÒÅÎÎÑ ÆÁÊÌÏ×ϧ ÓÉÓÔÅÍÉ). ð¦Ä ÞÁÓ ÃØÏÇÏ, ÷É\n"
-#~ "ÔÁËÏÖ ÍÏÖÅÔŠצÄÆÏÒÍÁÔÕ×ÁÔÉ ×ÖÅ ÐÏÐÅÒÅÄÎØÏ ÆÏÒÍÁÔÏ×ÁΦ ÒÏÚĦÌÉ ÄÌÑ\n"
-#~ "ÔÏÇÏ, ÝÏ ÓÔÅÒÔÉ Ô¦ ÄÁΦ, ÝÏ ÔÁÍ ÚÁÐÉÓÁΦ. ÷¦ÄͦÔØÔÅ: ÎÅÍÁ¤\n"
-#~ "ÎÅÏÂȦÄÎÏÓÔ¦ × ÏÂÏ×'ÑÚËÏ×ÏÍÕ ÆÏÒÍÁÔÕ×ÁÎΦ Ô¦ ЦÄÒÏÚĦÌÉ, ÝÏ\n"
-#~ "ÐÏÐÅÒÅÄÎØÏ ¦ÓÎÕ×ÁÌÉ. ïÓÏÂÌÉ×Ï, ÑËÝÏ ÎÁ ÎÉÈ ÚÂÅÒ¦ÇÁÀÔØÓÑ ÄÁΦ, Ñ˦ ÷É\n"
-#~ "ÈÏÔ¦ÌÉ Â ÚÁÌÉÛÉÔÉ ÎÅÕÛËÏÄÖÅÎÉÍÉ. \n"
-#~ "îÁÊÞÁÓÔ¦ÛÅ ÕÔÒÉÍÕÀÔØÓÑ ×¦Ä ÆÏÒÍÁÔÕ×ÁÎÎÑ ÔÁËÉÈ ÒÏÚĦ̦×, ÑË /home ÔÁ\n"
-#~ "/usr/local."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "÷ÉÂÒÁΦ ÐÁËÅÔÉ ÚÁÒÁÚ ×ÓÔÁÎÏ×ÌÀÀÔØÓÑ. ãÑ ÏÐÅÒÁÃ¦Ñ ÍÁ¤ ÚÁÊÎÑÔÉ Ë¦ÌØËÁ\n"
-#~ "È×ÉÌÉÎ, ÑËÝÏ ÷É ÎÅ ×ÉÂÒÁÌÉ ÏÐæÀ ÄÌÑ ÐÏÎÏ×ÌÅÎÎÑ ¦ÓÎÕÀÞϧ ÓÉÓÔÅÍÉ. ÷\n"
-#~ "ÃØÏÍÕ ×ÉÐÁÄËÕ ÃÅ ÚÁÊÍŠ¦ÌØÛÅ ÞÁÓÕ ÎÁצÔØ ÄÏ ÐÏÞÁÔËÕ ÐÏÎÏ×ÌÅÎÎÑ."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "ñËÝÏ DrakX ÎÅ ÚÍ¦Ç ÚÎÁÊÔÉ ÷ÁÛÕ ÍÉÛËÕ, ÁÂÏ, ÑËÝÏ ÷É ÈÏÞÅÔÅ ÐÅÒÅצÒÉÔÉ,\n"
-#~ "ÑËÕ ÓÁÍŠצΠ×ÉÂÒÁ×, ÷ÁÍ ÂÕÄÅ ÎÁÄÁÎÏ ÓÐÉÓÏË ¦Ú ÔÉÐÁÍÉ ÍÉÛÏË.\n"
-#~ "\n"
-#~ "\n"
-#~ "ñËÝÏ ÷ÁÓ ×ÌÁÛÔÏ×Õ¤ ×ɦÒ, ÚÒÏÂÌÅÎÉÊ DrakX, ÐÒÏÓÔÏ ËÌÁÃΦÔØ ÎÁ ËÎÏÐæ\n"
-#~ "\"çÁÒÁÚÄ\" ̦×ÏÒÕÞ. ñËÝÏ Ö Î¦, ×ÉÂÅÒ¦ÔØ ¦Ú ÓÐÉÓËÕ ÔÏÊ ÔÉÐ ÍÉÛËÉ, ÑËÉÊ ÎÁ\n"
-#~ "÷ÁÛÕ ÄÕÍËÕ ¤ ÎÁÊÂÌÉÖÞÉÍ ÔÏÍÕ ÔÉÐÕ ÍÉÛËÉ, ÝÏ ÷É ÍÁ¤ÔÅ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ëÒ¦Í ÔÏÇÏ, ÑËÝÏ ÷É  ÍÁ¤ÔÅ ÍÉÛËÕ, Ú'¤ÄÎÁÎÕ Ú ÐÏÓ̦ÄÏ×ÎÉÍ ÐÏÒÔÏÍ, ÷ÁÍ\n"
-#~ "ÔÒÅÂÁ ÂÕÄÅ ×ËÁÚÁÔÉ, ÄÏ ÑËÏÇÏ Ú ÐÏÒÔ¦× ÃÑ ÍÉÛËÁ ЦÄËÌÀÞÅÎÁ."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "÷ ÃØÏÍÕ ÒÏÚĦ̦ ÷É ÍÏÖÅÔÅ ÓËÏÎƦ­ÕÒÕ×ÁÔÉ ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ (LAN) ÁÂÏ\n"
-#~ "ÍÏÄÅÍ.\n"
-#~ "\n"
-#~ "ñËÝÏ ÷É ×ÉÂÅÒÅÔÅ \"LAN\" × ÃØÏÍÕ ÐÕÎËÔ¦, DrakX ÓÐÒÏÂÕ¤ צÄÛÕËÁÔÉ ÐÌÁÔÕ\n"
-#~ "Ethernet × ÷ÁÛ¦Ê ÓÉÓÔÅͦ. ÷Ó¦ ÐÌÁÔÉ PCI ÍÏÖÕÔØ ÂÕÔÉ ÚÎÁÊÄÅΦ ÔÁ\n"
-#~ "¦Î¦Ã¦Á̦ÚÏ×ÁΦ Á×ÔÏÍÁÔÉÞÎÏ. ïÄÎÁË, ÑËÝÏ ÷ÁÛÁ ÐÌÁÔÁ ÎÁÌÅÖÉÔØ ÄÏ ËÌÁÓÕ\n"
-#~ "ISA, Á×ÔÏÍÁÔÉÞÎÅ ×ÉÚÎÁÞÅÎÎÑ ÍÏÖÅ ÎÅ ÓÐÒÁÃÀ×ÁÔÉ, ¦ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ\n"
-#~ "×ÉÂÒÁÔÉ ÄÒÁÊ×ÅÒ ÄÌÑ Ã¦¤§ ÐÌÁÔÉ ¦Ú ÔÏÇÏ ÓÐÉÓËÕ, ÑËÉÊ ÷ÁÍ ÂÕÄÅ ÐÏËÁÚÁÎÏ\n"
-#~ "\n"
-#~ "\n"
-#~ "ýÏ ÓÔÏÓÕ¤ÔØÓÑ ÁÄÁÐÔÏÒ¦× SCSI, ÷É ÍÏÖÅÔÅ ÄÏÚ×ÏÌÉÔÉ ÄÒÁÊ×ÅÒÕ ×ÉÐÒÏÂÕ×ÁÔÉ\n"
-#~ "ÐÌÁÔÕ, ÁÂÏ ÚÁͦÓÔØ ÃØÏÇÏ ×ËÁÚÁÔÉ ÄÌÑ ÃØÏÇÏ ÄÒÁÊ×ÅÒÁ ÐÏÔÒ¦ÂΦ\n"
-#~ "ÐÁÒÁÍÅÔÒÉ, Ñ˦ ÷É ÍÏÖÅÔŠĦÚÎÁÔÉÓÑ Ú ÄÏËÕÍÅÎÔÁæ§ Ú ÷ÁÛÏÇÏ ÁÐÁÒÁÔÎÏÇÏ\n"
-#~ "ÚÁÂÅÚÐÅÞÅÎÎÑ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ñËÝÏ ÷É ×ÓÔÁÎÏ×ÌÀ¤ÔÅ Mandrake ì¦ÎÁËÓ ÎÁ ËÏÍÐ'ÀÔÅÒ¦, ÝÏ ¤ ÞÁÓÔÉÎÏÀ ×ÖÅ\n"
-#~ "¦ÓÎÕÀÞϧ ÍÅÒÅÖ¦, ×¦Ä ÁÄͦΦÓÔÒÁÔÏÒÁ ÍÅÒÅÖ¦ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ÏÔÒÉÍÁÔÉ\n"
-#~ "ÎÅÏÂȦÄΦ ÄÁΦ ÝÏÄÏ ÕÓÔÁÎÏ×ËÉ ÄÁÎϧ ÓÉÓÔÅÍÉ (IP ÁÄÒÅÓÕ, ÍÁÓËÕ ÍÅÒÅÖ¦\n"
-#~ ",ÞÉ, ÑË ËÁÖÕÔØ \"netmask\", ÔÁ ¦Í'Ñ ÃØÏÇÏ ÈÏÓÔÁ). ñËÝÏ Ö ÷É ×ÓÔÁÎÏ×ÌÀ¤ÔÅ\n"
-#~ "Ó×ÏÀ ÐÒÉ×ÁÔÎÕ ÍÅÒÅÖÕ × ÓÅÂÅ ×ÄÏÍÁ, ÎÁÐÒÉËÌÁÄ, ÷É ÍÁ¤ÔÅ ×ÉÂÒÁÔÉ ×Ó¦\n"
-#~ "ÁÄÒÅÓÉ ÓÁÍÏÓÔ¦ÊÎÏ.\n"
-#~ "\n"
-#~ "\n"
-#~ "÷ÉÂÅÒ¦ÔØ \"ú×'ÑÚÏË ÞÅÒÅÚ ÍÏÄÅÍ\" ¦ ÷ÁÛ ÍÏÄÅÍ ÔÁ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ\n"
-#~ "ÂÕÄÕÔØ Á×ÔÏÍÁÔÉÞÎÏ ÓËÏÎƦ­ÕÒÏ×ÁΦ. DrakX ÓÐÒÏÂÕ¤ ÚÎÁÊÔÉ ÷ÁÛ ÍÏÄÅÍ. \n"
-#~ "ñËÝÏ ÃÅ ÎÅ ×ÄÁÓÔØÓÑ, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ×ÉÂÒÁÔÉ ×¦ÒÎÉÊ ÐÏÓ̦ÄÏ×ÎÉÊ ÐÏÒÔ, \n"
-#~ "ÄÏ ÑËÏÇÏ Ð¦ÄËÌÀÞÅÎÉÊ ÷ÁÛ ÍÏÄÅÍ."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "GNU/ì¦ÎÁËÓ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú ×ÅÌÉÞÅÚÎÏÀ ˦ÌØ˦ÓÔÀ ÐÒÉÎÔÅÒ¦×. ëÏÖÅÎ Ú ÃÉÈ\n"
-#~ "ÏËÒÅÍÉÈ ÔÉÐ¦× ÐÒÉÎÔÅÒ¦× ×ÉÍÁÇÁ¤ ÏËÒÅÍϧ ÕÓÔÁÎÏ×ËÉ. ÷¦ÄͦÔØÔÅ ÏÄÎÁË, ÝÏ\n"
-#~ "ÓÐÕÌÅÒ ÐÒÉÎÔÅÒÁ Ú×ÉÞÁÊÎÏ ×ÉËÏÒÉÓÔÏ×Õ¤ ÎÁÚ×Õ 'lp'; ÏÔÖÅ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
-#~ "ÍÁÔÉ ÏÄÉÎ ÐÒÉÎÔÅÒ Ú ÔÁËÏÀ ÎÁÚ×ÏÀ. áÌÅ ÷É ÍÏÖÅÔÅ ÄÁÔÉ ÏÄÎÏÍÕ ÐÒÉÎÔÅÒÕ\n"
-#~ "˦ÌØËÁ ÎÁÚ× ÒÏÚĦÌÅÎÉÈ Í¦Ö ÓÏÂÏÀ ÚÎÁËÁÍÉ '|'. ôÏÂÔÏ, ÑËÝÏ ÷É ×¦ÄÄÁ¤ÔÅ\n"
-#~ "ÐÅÒÅ×ÁÇÕ Â¦ÌØÛ ÏÓÍÉÓÌÅÎ¦Ê ÎÁÚצ, ÷ÁÍ ÐÒÏÓÔÏ ÔÒÅÂÁ ÐÏÓÔÁ×ÉÔÉ ÃÀ ÎÁÚ×Õ\n"
-#~ "ÎÁ ÐÏÞÁÔËÕ, ÑË, ÎÁÐÒÉËÌÁÄ: \"My Printer|lp\". ðÒÉÎÔÅÒ, ÑËÉÊ ÍÁ¤ 'lp'  ×\n"
-#~ "Ó×Ï§Ê ÎÁÚצ ÂÕÄÅ ÓÔÁÎÄÁÒÔÎÉÍ ÐÒÉÎÔÅÒÏÍ ÓÉÓÔÅÍÉ. \n"
-#~ "\n"
-#~ "\n"
-#~ "ñËÝÏ ÷ÁÛ ÐÒÉÎÔÅÒ ÂÅÚÐÏÓÅÒÅÄÎØÏ Ð¦ÄËÌÀÞÅÎÉÊ ÄÏ ÷ÁÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ,\n"
-#~ "×ÉÂÅÒ¦ÔØ \"ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ\". ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ×ËÁÚÁÔÉ, ÄÏ ÑËÏÇÏ\n"
-#~ "ÐÏÒÔÕ ÷ÁÛ ÐÒÉÎÔÅÒ Ð¦ÄËÌÀÞÅÎÉÊ ¦ ×ÉÂÒÁÔÉ ÔÁËÏÖ ×¦ÄÐÏצÄÎÉÊ Æ¦ÌØÔÒ ÄÌÑ\n"
-#~ "ÎØÏÇÏ. \n"
-#~ "\n"
-#~ "\n"
-#~ "ñËÝÏ ÐÒÉÎÔÅÒ, ÎÁ ÑËÉÊ ÷É ÂÕÄÅÔÅ ÄÒÕËÕ×ÁÔÉ, ÚÎÁÈÏÄÉÔØÓÑ ÎÁ ¦ÎÛÏÍÕ\n"
-#~ "ËÏÍÐ'ÀÔÅÒ¦ Ú UNIX'ÏÍ, ÷ÁÍ ÓÌ¦Ä ×ÉÂÒÁÔÉ \"÷¦ÄÄÁÌÅÎÁ ÞÅÒÇÁ ÄÒÕËÕ\n"
-#~ "lpq\". äÌÑ ÔÏÇÏ, ÝÏ ÄÒÕËÕ×ÁÔÉ ÎÁ ÃØÏÍÕ ÐÒÉÎÔÅÒ¦, ÷ÁÍ ÎÅ ÐÏÔÒ¦ÂÎÏ\n"
-#~ "ÍÁÔÉ Ó×¦Ê ÒÁÈÕÎÏË ÞÉ ÐÁÒÏÌØ ÎÁ צÄÄÁÌÅÎÏÍÕ ËÏÍÐ'ÀÔÅÒ¦, ÁÌÅ ÎÁÔÏͦÓÔØ\n"
-#~ "÷É ÐÏ×ÉÎΦ ÚÎÁÔÉ ÎÁÚ×Õ ×¦ÄÄÁÌÅÎϧ ÞÅÒÇÉ ÎÁ ÔÏÍÕ ÓÅÒ×ÅÒ¦. \n"
-#~ "\n"
-#~ "\n"
-#~ "ñËÝÏ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÄÒÕËÕ×ÁÔÉ ÎÁ SMB ÐÒÉÎÔÅÒ (ÝÏ ÏÚÎÁÞÁ¤, ÐÒÉÎÔÅÒ\n"
-#~ "ЦÄ'¤ÄÎÁÎÉÊ ÄÏ ËÏÍÐ'ÀÔÅÒÁ Ú Windows 9x/NT), ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ×ËÁÚÁÔÉ\n"
-#~ "ÊÏÇÏ SMB ¦Í'Ñ (ÃÅ ¦Í'Ñ ×¦ÄÒ¦ÚÎѤÔØÓÑ ×¦Ä TCP/IP ¦ÍÅΦ), ¦ ÍÏÖÌÉ×Ï\n"
-#~ "ÔÁËÏÖ ÊÏÇÏ IP ÁÄÒÅÓÕ, Á ÔÁËÏÖ ¦Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ, ÒÏÂÏÞÕ ÇÒÕÐÕ ÔÁ\n"
-#~ "ÐÁÒÏÌØ ÐÏÔÒ¦ÂΦ ÄÌÑ ÄÏÓÔÕÐÕ ÄÏ ÐÒÉÎÔÅÒÁ, ¦, Ú×ÉÞÁÊÎÏ-Ö ¦Í'Ñ\n"
-#~ "ÐÒÉÎÔÅÒÁ. ôÅÖ ÓÁÍÅ ÓÔÏÓÕ¤ÔØÓÑ ÐÒÉÎÔÅÒÁ ÄÌÑ NetWare, ËÒ¦Í ÔÏÇÏ, ÝÏ ÷ÁÍ\n"
-#~ "ÎÅ ÐÏÔÒ¦ÂÎÏ ÍÁÔÉ ¦ÎÆÏÒÍÁæÀ ÐÒÏ ÒÏÂÏÞ¦ ÇÒÕÐÉ"
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "íÉ ÎÁÓÔ¦ÊÌÉ×Ï ÒÅËÏÍÅÎÄÕ¤ÍÏ ÷ÁÍ ÄÁÔÉ ÔÕÔ ×¦ÄÐÏצÄØ \"ôÁË\". ñËÝÏ ÷É\n"
-#~ "×ÓÔÁÎÏ×ÉÔŠЦÚΦÛÅ Micrososft Windows ÎÁ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦, ÃÑ\n"
-#~ "ÕÓÔÁÎÏ×ËÁ ÐÅÒÅÔÒÅ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ ÓÅËÔÏÒ. ñËÝÏ Õ ÷ÁÓ ÎÅ ÂÕÄÅ ÄÉÓËÅÔÉ\n"
-#~ "ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ, ÷É ÎÅ ÚÍÏÖÅÔÅ ÚÁ×ÁÎÔÁÖÉÔÉÓÑ Õ GNU/ì¦ÎÁËÓ."
-
-#~ msgid "Forget the changes?"
-#~ msgstr "÷¦ÄÍÏ×ÉÔÉÓÑ ×¦Ä ÚͦÎ?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "á×ÔÏÍÁÔÉÞÎÁ ÒÏÚĦÌØÎÁ ÚÄÁÔΦÓÔØ"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "ýÏ ×ÉÚÎÁÞÉÔÉ ÒÏÚĦÌØΦ ÚÄÁÔÎÏÓÔ¦, Ñ ÓÐÒÏÂÕÀ ×ÓÔÁÎÏ×ÉÔÉ Ë¦ÌØËÁ Ú ÎÉÈ\n"
-#~ "÷ÁÛ ÅËÒÁÎ ÂÌÉÍΊ˦ÌØËÁ ÒÁÚ¦×...\n"
-#~ "÷É ÍÏÖÅÔÅ ×ÉÍËÎÕÔÉ ÍÏΦÔÏÒ, ÑËÝÏ ÈÏÞÅÔÅ. ÷É ÐÏÞÕ¤ÔÅ Ú×ÕËÏ×ÉÊ ÓÉÇÎÁÌ,\n"
-#~ "ËÏÌÉ ÔÅÓÔÕ×ÁÎÎÑ ÚÁ˦ÎÞÉÔØÓÑ"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "ñ ÍÏÖÕ ÓÐÒÏÂÕ×ÁÔÉ ÚÎÁÊÔÉ Ô¦ ÒÏÚĦÌØΦ ÚÄÁÔÎÏÓÔ¦, Ú ÑËÉÍÉ Ñ ÍÏÖÕ\n"
-#~ "ÐÒÁÃÀ×ÁÔÉ (ÑË, ÎÁÐÒÉËÌÁÄ, 800x600). \n"
-#~ "áÌÅ, × ÄÅÑËÉÈ ×ÉÐÁÄËÁÈ ËÏÍÐ'ÀÔÅÒ ÍÏÖÅ ÚÁ×ÉÓÎÕÔÉ ÐÒÉ ÃØÏÍÕ. þÉ ÷É\n"
-#~ "ÈÏÞÅÔÅ ÓÐÒÏÂÕ×ÁÔÉ ÃÅÊ ÔÅÓÔ? "
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "îÅ ÍÏÖÕ ÚÎÁÊÔÉ ÐÏÔÒ¦ÂÎÏÇÏ ÒÏÂÏÞÏÇÏ ÒÅÖÉÍÕ\n"
-#~ "ðÏÐÒÏÂÕÊÔÅ ×ÉÂÒÁÔÉ ¦ÎÛÕ ×¦ÄÅÏ ÐÌÁÔÕ ÞÉ ÍÏΦÔÏÒ"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "á×ÔÏÍÁÔÉÞÎÉÊ ÐÏÛÕË ÒÏÚĦÌØÎÉÈ ÚĦÂÎÏÓÔÅÊ"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "íÉÛÁ Apple ADB"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "íÉÛÁ Apple ADB (Ú Ä×ÏÍÁ ËÎÏÐËÁÍÉ)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "íÉÛÁ Apple ADB (Ú ÔÒØÏÍÁ ÁÂÏ Â¦ÌØÛÅ ËÎÏÐËÁÍÉ)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "íÉÛÁ USB Apple"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "íÉÛËÁ USB Apple (Ú Ä×ÏÍÁ ËÌÁצÛÁÍÉ)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "íÉÛËÁ USB Apple (Ú ÔÒØÏÍÁ ÁÂÏ Â¦ÌØÛÅ ËÌÁצÛÁÍÉ)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Bus Mouse"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft Bus Mouse"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech Bus Mouse"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "íÉÛËÁ USB (Ú ÔÒØÏÍÁ ÁÂÏ Â¦ÌØÛÅ ËÌÁצÛÁÍÉ)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A ÔÁ ×ÉÝÅ (serial)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (serial)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (serial)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (serial)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Generic Mouse (serial)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft-ÓÕͦÓÎÁ (serial)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Generic 3 Button Mouse (serial)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (ÐÏÓ̦ÄÏ×ÎÉÊ ÐÏÒÔ)"
-
-#~ msgid ""
-#~ "Please choose which network adapter do you want to use to connect to "
-#~ "internet.\n"
-#~ "If you don't know, choose eth0.\n"
-#~ msgstr ""
-#~ "÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÑËÉÊ ÁÄÁÐÔÅÒ ÍÅÒÅÖ¦ ÂÕÄŠЦÄËÌÀÞÅÎÏ ÄÏ ÌÏËÁÌØÎϧ\n"
-#~ "ÍÅÒÅÖ¦.\n"
-#~ "Z\n"
-#~ "ñËÝÏ ÎÅ ÚÎÁ¤ÔÅ, ×ÉÂÅÒ¦ÔØ eth0.\n"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "ÎÅ ÍÏÖÕ ÚÍÏÎÔÕ×ÁÔÉ NFS"
-
-#~ msgid "tie"
-#~ msgstr "ËÒÁ×ÁÔËÁ"
-
-#~ msgid "brunette"
-#~ msgstr "ÂÒÀÎÅÔËÁ"
-
-#~ msgid "girl"
-#~ msgstr "Ħ×ÞÉÎÁ"
-
-#~ msgid "woman-blond"
-#~ msgstr "ÂÌÏÎÄÉÎËÁ"
-
-#~ msgid "automagic"
-#~ msgstr "Á×ÔÏÍÁÔÉÞÎÏ"
-
-#~ msgid "Cryptographic"
-#~ msgstr "ëÒÉÐÔÏÇÒÁƦÑ"
-
-#~ msgid "Take over the hard drive"
-#~ msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ ×Ó¦Í ÖÏÒÓÔËÉÍ ÄÉÓËÏÍ"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "îÅ ÎÁÓÔÒÏÀ×ÁÔÉ ÍÅÒÅÖÕ"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "þÉ ÷É ÈÏÞÅÔÅ ÎÁÓÔÒϧÔÉ ÍÅÒÅÖÕ ÓÉÓÔÅÍÉ?"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX ÓÔ×ÏÒÉÔØ ËÏÎƦÇÕÒÁæÊΦ ÆÁÊÌÉ ÑË ÄÌÑ Xfree 3.3, ÔÁË ¦ ÄÌÑ XFree\n"
-#~ "4.0. ú×ÉÞÁÊÎÏ ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÓÅÒ×ÅÒ 4.0, ËÒ¦Í ÔÏÇÏ ×ÉÐÁÄËÕ, ËÏÌÉ ÷ÁÛÁ "
-#~ "צÄÅÏÐÌÁÔÁ ΊЦÄÔÒÉÍÕ¤ÔØÓÑ ÃÉÍ ÓÅÒ×ÅÒÏÍ.\n"
-#~ "\n"
-#~ "þÉ ÈÏÞÅÔÅ ÚÂÅÒÅÇÔÉ ÔÁËÏÖ ÕÓÔÁÎÏ×ËÕ XFree 3.3?"
-
-#~ msgid "Have you been provided with a hostname?"
-#~ msgstr "þÉ ÷É ÏÔÒÉÍÁÌÉ ÎÁÚ×Õ ÈÏÓÔÁ?"
-
-#~ msgid "Show less"
-#~ msgstr "ðÏËÁÚÁÔÉ ×ÓÅ"
-
-#~ msgid "Show more"
-#~ msgstr "ðÏËÁÚÁÔÉ Â¦ÌØÛÅ"
-
-#~ msgid "Local Area Network specification"
-#~ msgstr "óÐÅÃÉƦËÁæ§ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
-
-#~ msgid "You may now decide which class C network to use.\n"
-#~ msgstr "úÁÒÁÚ ÷É ÍÏÖÅÔÅ ×ÉÒ¦ÛÉÔÉ ÑËÕ ÍÅÒÅÖÕ ËÌÁÓÕ C ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ.\n"
-
-#~ msgid "Network:"
-#~ msgstr "íÅÒÅÖÁ:"
-
-#~ msgid "Internet Connection Sharing - setup of %s"
-#~ msgstr "óЦÌØÎÅ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ - ÕÓÔÁÎÏ×ËÁ %s"
-
-#~ msgid ""
-#~ "The following interface is about to be configured:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "ãÅÊ ¦ÎÔÅÒÆÅÊÓ ÚÁÒÁÚ ÂÕÄÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-
-#~ msgid "Everything configured!"
-#~ msgstr "÷ÓÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ!"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "ñËÁ Õ ÷ÁÓ ÒÏÚËÌÁÄËÁ ËÌÁצÁÔÕÒÉ?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "óÐÒÏÂÕ×ÁÔÉ ×¦ÄÛÕËÁÔÉ PCMCIA ËÁÒÔËÉ?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "óÐÒÏÂÕ×ÁÔÉ ×¦ÄÛÕËÁÔÉ %s ÐÒÉÓÔÒϧ?"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr ""
-#~ "þÉ ÷É ÈÏÞÅÔÅ ÎÁÓÔÒϧÔÉ ÓÉÓÔÅÍÕ ÄÌÑ Ú×'ÑÚËÕ Ú ¦ÎÔÅÒÎÅÔÏÍ ÞÅÒÅÚ ÐÒÏ×ÁÊÄÅÒÁ?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "óÐÒÏÂÕ×ÁÔÉ ×¦ÄÛÕËÁÔÉ PCI ÐÒÉÓÔÒϧ?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "ûÕËÁÀ ЦÄÒÏÚÄ¦Ì root..."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: ãÅ ÎÅ root ЦÄÒÏÚĦÌ. ÷ÉÂÅÒ¦ÔØ ÂÕÄØ-ÌÁÓËÁ ¦ÎÛÉÊ."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr ""
-#~ "÷ÉÂÅÒ¦ÔØ Ð¦ÄÒÏÚĦÌ, ÑËÉÊ ÷É ÈÏÞÅÔÅ ÚÒÏÂÉÔÉ Ð¦ÄÒÏÚĦÌÏÍ root Õ ÷ÁÛ¦Ê "
-#~ "ÓÉÓÔÅͦ?"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "õ ÷ÁÓ ÎÅÍÁ¤ ÖÏÄÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ ÄÌÑ Windows!"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "õ ÷ÁÓ ÎÅ ×ÉÓÔÁÞÁ¤ ͦÓÃÑ ÄÌÑ Lnx4win!"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U íÂ"
-
-#~ msgid "SILO main options"
-#~ msgstr "ïÓÎÏ×Φ ÏÐæ§ SILO"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "ôÕÔ ÎÁ×ÅÄÅΦ ÔÁ˦ ÏÐæ§ ÄÌÑ SILO.\n"
-#~ "÷É ÍÏÖÅÔÅ ÁÂÏ ÄÏÄÁÔÉ ÝÅ ÄÅÑ˦, ÁÂÏ ÚͦÎÉÔÉ Ô¦, ÝÏ ×ÖÅ ¦ÓÎÕÀÔØ."
-
-#~ msgid "This label is already in use"
-#~ msgstr "ãÑ ÅÔÉËÅÔËÁ ×ÖÅ ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "õÓÔÁÎÏ×ËÁ SILO ÎÅÕÓЦÛÎÁ. óÔÁÌÁÓÑ ÐÏÍÉÌËÁ:"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "äÌÑ ÐÏÞÁÔËÕ DrakX ÓÐÒÏÂÕ¤ צÄÛÕËÁÔÉ ÏÄÎÕ ÁÂÏ Â¦ÌØÛÅ ÐÌÁÔ PCI\n"
-#~ "SCSI. ñËÝÏ ÃÑ ÓÐÒÏÂÁ ×ÄÁÓÔØÓÑ ¦ DrakX ÚÎÁ¤, Ñ˦ ÄÒÁÊ×ÅÒÉ\n"
-#~ "×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÄÌÑ ÃÉÈ ÐÌÁÔ, צΠÚÁ×ÁÎÔÁÖÉÔØ §È Á×ÔÏÍÁÔÉÞÎÏ. \n"
-#~ "\n"
-#~ "ñËÝÏ SCSI ÐÌÁÔÁ, ÑËÏÀ ÷É ËÏÒÉÓÔÕ¤ÔÅÓØ ¤ ISA ÐÌÁÔÏÀ, ÁÂÏ ÔÁËÏÀ PCI\n"
-#~ "ÐÌÁÔÏÀ, ÐÒÏ ÑËÕ DrakX ÎÅ ÚÎÁ¤, ÁÂÏ × ÔÏÍÕ ×ÉÐÁÄËÕ, ËÏÌÉ ÷É ÎÅ ÍÁ¤ÔÅ\n"
-#~ "SCSI ÐÌÁÔ, ÷É ÐÏÂÁÞÉÔÅ ÚÁÐÒÏÛÅÎÎÑ, ÄÅ ÷ÁÍ ÔÒÅÂÁ צÄÐÏצÓÔÉ, ÎÁ\n"
-#~ "ÚÁÐÉÔÁÎÎÑ, ÞÉ ÍÁ¤ÔÅ ÷É ÔÁËÕ ÐÌÁÔÕ, ÞÉ Î¦.\n"
-#~ "ñËÝÏ ÷É ÎÅ ÍÁ¤ÔÅ ÐÌÁÔÉ, ÄÁÊÔŠצÄÐÏצÄØ \"î¦\". ñËÝÏ Õ ÷ÁÓ\n"
-#~ "×ÓÔÁÎÏ×ÌÅÎÁ ÏÄÎÁ ÁÂÏ Ë¦ÌØËÁ ÔÁËÉÈ ÐÌÁÔ, ÄÁÊÔŠצÄÐÏצÄØ\n"
-#~ "\"ôÁË\". ð¦ÓÌÑ ÃØÏÇÏ Ú'Ñ×ÉÔØÓÑ ÓÐÉÓÏË ÄÒÁÊ×ÅÒ¦×. ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ×ÉÂÒÁÔÉ\n"
-#~ "ÏÄÉÎ ÄÒÁÊ×ÅÒ Ú ÃØÏÇÏ ÓÐÉÓËÕ.\n"
-#~ "\n"
-#~ "ð¦ÓÌÑ ÔÏÇÏ, ÑË ÷É ×ÉÂÅÒÅÔÅ ÄÒÁÊ×ÅÒ, DrakX ÓÐÉÔÁ¤ ÷ÁÓ, ÞÉ ÎÅ ÈÏÞÅÔÅ ÷É\n"
-#~ "×ËÁÚÁÔÉ ÐÁÒÁÍÅÔÒÉ ÄÌÑ ÎØÏÇÏ. óÐÏÞÁÔËÕ ÄÁÊÔÅ ÚÍÏÇÕ ÄÒÁÊ×ÅÒÕ ÏÐÒÏÂÕ×ÁÔÉ\n"
-#~ "÷ÁÛÕ ÁÐÁÒÁÔÕÒÕ: × Â¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× ÃÅ ÓÐÒÁÃØÏ×Õ¤.\n"
-#~ "\n"
-#~ "ñËÝÏ Ö Î¦ - ÎÅ ÚÁÂÕÄØÔÅ, ÝÏ ¦ÎÆÏÒÍÁæÀ ÐÒÏ Ô¦ ÐÒÉÓÔÒϧ, Ñ˦ Õ ÷ÁÓ\n"
-#~ "×ÓÔÁÎÏ×ÌÅΦ, ÷É ÍÏÖÅÔŠĦÓÔÁÔÉ Ú Windows (ÑËÝÏ, ×¦Î Õ ÷ÁÓ, Ú×ÉÞÁÊÎÏ,\n"
-#~ "×ÓÔÁÎÏ×ÌÅÎÉÊ), ÔÁË ÑË ÃÅ ÒÅËÏÍÅÎÄÏ×ÁÎÏ ËÅÒ¦×ÎÉÃÔ×ÏÍ ÐÏ ÕÓÔÁÎÏ×æ. ã¦\n"
-#~ "ÐÁÒÁÍÅÔÒÉ ÷É ÐÏ×ÉÎΦ ×ËÁÚÁÔÉ ÄÒÁÊ×ÅÒÕ."
-
-#~ msgid "Shutting down"
-#~ msgstr "÷ÉÍÉËÁÀ"
-
-#~ msgid "useless"
-#~ msgstr "ÎÅ ÚÎÁÈÏÄÉÔØ ÚÁÓÔÏÓÕ×ÁÎÎÑ"
-
-#~ msgid ""
-#~ "Some true type fonts from windows have been found on your computer.\n"
-#~ "Do you want to use them? Be sure you have the right to use them under "
-#~ "Linux."
-#~ msgstr ""
-#~ "äÅÑ˦ Ú TrueType ÛÒÉÆÔ¦× Ú Windows ÚÎÁÊÄÅΦ ÎÁ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦.  ÷É\n"
-#~ "ÈÏÞÅÔÅ ÎÉÍÉ ÓËÏÒÉÓÔÁÔÉÓÑ? áÌÅ ×ÐÅ×ΦÔØÓÑ, ÝÏ ÷É ÍÁ¤ÔÅ ÐÒÁ×Á ÎÁ\n"
-#~ "×ÉËÏÒÉÓÔÁÎÎÑ ÃÉÈ ÛÒÉÆÔ¦× Õ ì¦ÎÁËÓ¦."
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "ñËÝÏ ÒÁΦÛÅ ÎÅ ÂÕÌÏ ×ÓÔÁÎÏ×ÌÅÎÏ ÖÏÄÎϧ ÓÉÓÔÅÍÉ Ú ì¦ÎÁËÓÏÍ ÁÂÏ ÑËÝÏ "
-#~ "÷ÉÈÏÞÅÔÅ\n"
-#~ "ÍÁÔÉ Ë¦ÌØËÁ Ò¦ÚÎÉÈ ×ÅÒÓ¦Ê ì¦ÎÁËÓÁ ×ÉÂÅÒ¦ÔØ \"õÓÔÁÎÏ×ËÁ\".\n"
-#~ "\n"
-#~ "ñËÝÏ ÷É ÈÏÞÅÔÅ ÐÏÎÏ×ÉÔÉ ÒÁΦÛÅ ×ÓÔÁÎÏ×ÌÅΦ ×ÅÒÓ¦§ Mandrake ì¦ÎÁËÓÁ: \n"
-#~ "5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios),\n"
-#~ "Gold 2000, 7.0 (Air) ×ÉÂÅÒ¦ÔØ\"ðÏÎÏ×ÌÅÎÎÑ\""
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "þÉ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ LILO?"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÐÒÏÇÒÁÍΦ ÐÁËÅÔÉ ÄÌÑ ÕÓÔÁÎÏ×ËÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "óÐÏÞÁÔËÕ ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÇÒÕÐÕ ÐÁËÅÔÁ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ÞÉ\n"
-#~ "ÐÏÎÏ×ÌÅÎÎÑ. ð¦ÓÌÑ ÃØÏÇÏ ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ Â¦ÌØÛÅ ÐÁËÅÔ¦× × ÚÁÌÅÖÎÏÓÔ¦\n"
-#~ "×¦Ä ÚÁÇÁÌØÎÏÇÏ ÏÂ'¤ÍÕ ÐÁËÅÔ¦×, ÝÏ ÷É ÈÏÞÅÔÅ ×ÉÂÒÁÔÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ëÏÌÉ ÷É ÚÎÁÈÏÄÉÔÅÓØ × ÒÅÖÉͦ ÅËÓÐÅÒÔÁ, ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÏËÒÅͦ\n"
-#~ "ÐÁËÅÔÉ. ðÁÍ'ÑÔÁÊÔÅ, ÝÏ ÕÓÔÁÎÏ×ËÁ ÄÅÑËÉÈ ÐÁËÅÔ¦× ×ÉÍÁÇÁ¤ ÐÏÐÅÒÅÄÎØϧ\n"
-#~ "ÕÓÔÁÎÏ×ËÉ ¦ÎÛÉÈ ÐÁËÅÔ¦×. ãÅ ÎÁÚÉ×ÁÀÔØ ÚÁÌÅÖΦÓÔÀ ÐÁËÅÔ¦×. ô¦ ÐÁËÅÔÉ,\n"
-#~ "Ñ˦ ÷É ×ÉÂÅÒÅÔÅ ¦ Ô¦ ÐÁËÅÔÉ, ×¦Ä ÑËÉÈ ×ÏÎÉ ÚÁÌÅÖÁÔØ ÂÕÄÕÔØ ×ÉÂÒÁΦ\n"
-#~ "Á×ÔÏÍÁÔÉÞÎÏ ÄÌÑ ÕÓÔÁÎÏ×ËÉ. ðÁËÅÔ ÎÅÍÏÖÌÉ×Ï ×ÓÔÁÎÏ×ÉÔÉ ÂÅÚ ÕÓÔÁÎÏ×ËÉ\n"
-#~ "×Ó¦È ÐÁËÅÔ¦×, ×¦Ä ÑËÉÈ ×¦Î ÚÁÌÅÖÉÔØ."
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (LInux LOader) ÍÏÖÅ ÚÁ×ÁÎÔÁÖÕ×ÁÔÉ ¦ÎÛ¦ ÏÐÅÒÁæÊΦ ÓÉÓÔÅÍÉ. õ\n"
-#~ "¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× ×ÏÎÉ ×¦ÒÎÏ ×ÉÚÎÁÞÁÀÔØÓÑ Ð¦Ä ÞÁÓ ÕÓÔÁÎÏ×ËÉ\n"
-#~ "ÓÉÓÔÅÍÉ. ñËÝÏ ÷É ÎÅ ÂÁÞÉÔÅ ÷ÁÛϧ ÓÉÓÔÅÍÉ Õ ÓÐÉÓËÕ, ÷É ÍÏÖÅÔÅ ÄÏÄÁÔÉ §§\n"
-#~ "ÚÁÒÁÚ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ñËÝÏ ÷É ÎÅ ÈÏÞÅÔÅ, ÝÏ ËÏÖÅÎ Í¦Ç ÚÁ×ÁÎÔÁÖÉÔÉ ÏÄÎÕ ¦Ú ÃÉÈ ÓÉÓÔÅÍ, ÷É\n"
-#~ "ÍÏÖÅÔÅ ÚÁÂÒÁÔÉ §§ ÚÁÒÁÚ ¦Ú ÓÐÉÓËÕ (ÄÌÑ §§ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÐÏÔÒ¦ÂÎÁ ÂÕÄÅ\n"
-#~ "ÄÉÓËÅÔÁ)."
-
-#~ msgid ""
-#~ "Now that you've selected desired groups, please choose \n"
-#~ "how many packages you want, ranging from minimal to full \n"
-#~ "installation of each selected groups."
-#~ msgstr ""
-#~ "ôÅÐÅÒ, ЦÓÌÑ ÔÏÇÏ, ÑË ÷É ×ÉÂÒÁÌÉ ÂÁÖÁΦ ÇÒÕÐÉ, ×ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ,\n"
-#~ "˦ÌØ˦ÓÔØ ÐÁËÅÔ¦× ÄÌÑ ÕÓÔÁÎÏ×ËÉ. ÷ ĦÁÐÁÚÏΦ ×¦Ä Í¦Î¦ÍÁÌØÎϧ ÕÓÔÁÎÏ×ËÉ\n"
-#~ "ÄÏ ÐÏ×Îϧ ÕÓÔÁÎÏ×ËÉ ËÏÖÎϧ ×ÉÂÒÁÎϧ ÇÒÕÐÉ."
-
-#~ msgid ""
-#~ "You need %dMB for a full install of the groups you selected.\n"
-#~ "You can go on anyway, but be warned that you won't get all packages"
-#~ msgstr ""
-#~ "äÌÑ ÐÏ×Îϧ ÕÓÔÁÎÏ×ËÉ ×ÉÂÒÁÎÉÈ ÇÒÕÐ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ %dí צÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ\n"
-#~ "ÎÁ ÄÉÓËÕ. ÷É ÍÏÖÅÔÅ ÐÒÏÄÏ×ÖÕ×ÁÔÉ ÕÓÔÁÎÏ×ËÕ, ÁÌÅ ÐÁÍ'ÑÔÁÊÔÅ, ÝÏ ÷É ÎÅ\n"
-#~ "ÂÕÄÅÔÅ ÍÁÔÉ ×Ó¦ ÐÁËÅÔÉ."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "÷ÉÂÅÒ¦ÔØ:\n"
-#~ "\n"
-#~ "  - òÅËÏÍÅÎÄÏ×ÁÎÉÊ: ñËÝÏ ÷É Î¦ËÏÌÉ ÄÏ ÃØÏÇÏ ÎÅ ×ÓÔÁÎÏ×ÌÀ×ÁÌÉ ì¦ÎÁËÓ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - óÐÅæÁÌØÎÉÊ: ñËÝÏ ÷É ÚÎÁÊÏͦ Ú ì¦ÎÁËÓÏÍ, ÷É ÚÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ\n"
-#~ "Ò¦×ÅÎØ ×ÉËÏÒÉÓÔÁÎÎÑ ×ÓÔÁÎÏ×ÌÅÎÉÈ ÐÁËÅÔ¦× ÔÁ˦, ÑË Ú×ÉÞÁÊÎÉÊ, ÒÏÚÒÏÂÎÉË\n"
-#~ "ÔÁ ÓÅÒ×ÅÒ. ÷ÉÂÅÒ¦ÔØ \"ú×ÉÞÁÊÎÉÊ\", ÄÌÑ Ú×ÉÞÁÊÎÏÇÏ ×ÉËÏÒÉÓÔÁÎÎÑ ÓÉÓÔÅÍÉ,\n"
-#~ "ÑË ÐÅÒÓÏÎÁÌØÎÉÍ ËÏÍÐ'ÀÔÅÒÏÍ. ñËÝÏ ÷É ÂÕÄÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÓÉÓÔÅÍÕ ×\n"
-#~ "ÏÓÎÏ×ÎÏÍÕ ÄÌÑ ÒÏÚÒÏÂËÉ, ×ÉÂÅÒ¦ÔØ \"òÏÚÒÏÂÎÉË\". áÂÏ ×ÉÂÅÒ¦ÔØ \"óÅÒ×ÅÒ\",\n"
-#~ "ÑËÝÏ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÓÅÒ×ÅÒ ÚÁÇÁÌØÎÏÇÏ ÐÒÉÚÎÁÞÅÎÎÑ (ÄÌÑ\n"
-#~ "ÅÌÅËÔÒÏÎÎϧ ÐÏÛÔÉ, ÐÒÉÎÔ-ÓÅÒ×ÅÒ...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - åËÓÐÅÒÔ: ñËÝÏ ÷É ×¦ÌØÎÏ ÐÏÞÕ×Á¤ÔÅ × ÓÅÒÅÄÏ×Éݦ GNU/Linux ¦ ÈÏÞÅÔÅ\n"
-#~ "×ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ, ÔÁË ÑË ÷ÁÍ ÈÏÞÅÔØÓÑ - ÃÅÊ ÓÐÏӦ ÕÓÔÎÏ×ËÉ ÄÌÑ\n"
-#~ "÷ÁÓ. ÷É ÚÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÏÐæÀ ×ÉËÏÒÉÓÔÁÎÎÑ ÷ÁÛϧ ÓÉÓÔÅÍÉ, ÑË\n"
-#~ "\"óÐÅæÁÌØÎÅ\""
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "ú×ÁÎÔÁÖÕÀ ÐÁËÅÔÉ ËÒÉÐÔÏÇÒÁƦ§"
-
-#~ msgid "Setup SCSI"
-#~ msgstr "÷ÉÂÅÒ¦ÔØ SCSI"
-
-#~ msgid "Installation CD Nr %s"
-#~ msgstr "õÓÔÁÎÏ×ÏÞÎÉÊ CD Nr %s"
-
-#~ msgid ""
-#~ "Update installation image!\n"
-#~ "\n"
-#~ "Ask your system administrator or reboot to update your installation image "
-#~ "to include\n"
-#~ "the Cd-Rom image labelled \"%s\". Press Ok if image has been updated or "
-#~ "press Cancel\n"
-#~ "to avoid installation from this Cd-Rom image."
-#~ msgstr ""
-#~ "ðÏÎÏצÔØ ÕÓÔÁÎÏ×ÏÞÎÉÊ ÏÂÒÁÚ!\n"
-#~ "\n"
-#~ "ú×ÅÒΦÔØÓÑ ÄÏ ÓÉÓÔÅÍÎÏÇÏ ÁÄͦΦÓÔÒÁÔÏÒÁ, ÁÂÏ ÐÅÒÅ×ÁÎÔÁÖÔÅ ÓÉÓÔÅÍÕ, ÝÏÂ\n"
-#~ "×ËÌÀÞÉÔÉ ËÏÍÐÁËÔ-ÄÉÓË, ÐÏÚÎÁÞÅÎÉÊ \"%s\". îÁÔÉÓΦÔØ çÁÒÁÚÄ, ÑËÝÏ\n"
-#~ "ÚÏÂÒÁÖÅÎÎÑ ÂÕÌÏ ÐÏÎÏ×ÌÅÎÅ, ÁÂÏ ÷¦ÄͦÎÉÔÉ, ÑËÝÏ ÷É ÎÅ ÈÏÞÅÔÅ\n"
-#~ "×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÐÒÏÇÒÁÍÉ Ú ÏÂÒÁÚÕ ÃØÏÇÏ ËÏÍÐÁËÔ-ÄÉÓËÕ."
-
-#~ msgid "Which packages do you want to install"
-#~ msgstr "ñ˦ ÐÁËÅÔÉ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ?"
-
-#~ msgid "Local LAN"
-#~ msgstr "ìÏËÁÌØÎÁ ÍÅÒÅÖÁ"
-
-#~ msgid "Installation CD Nr 1"
-#~ msgstr "õÓÔÁÎÏ×ÏÞÎÉÊ CD Nr 1"
-
-#~ msgid "expert"
-#~ msgstr "ÅËÓÐÅÒÔ"
-
-#~ msgid "developer"
-#~ msgstr "ÒÏÚÒÏÂÎÉË"
-
-#~ msgid "beginner"
-#~ msgstr "ÐÏÞÁÔ˦×ÅÃØ "
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "ì¦Î¦ÊÎÉÊ (ÐÏÔÒ¦ÂÅÎ ÄÌÑ ÄÅÑËÉÈ SCSI ÄÉÓ˦×)"
-
-#~ msgid "linear"
-#~ msgstr "̦ΦÊÎÉÊ"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "ð¦ÓÌÑ %s ЦÄÒÏÚĦÌÕ %s"
-
-#~ msgid "changing type of"
-#~ msgstr "ÚͦÎÁ ÔÉÐÕ "
-
-#~ msgid "formatting"
-#~ msgstr "ÆÏÒÍÁÔÕ×ÁÎÎÑ"
-
-#~ msgid "resizing"
-#~ msgstr "ÚͦÎÀÀ ÒÏÚͦÒ"
-
-#~ msgid "US Keyboard"
-#~ msgstr "ëÌÁצÁÔÕÒÁ óûá"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "òÏÚͦÒ: %s íÂ"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "ú¦ÐÓÏ×ÁÎÉÊ ÓÔÁÒÔÏ×ÉÊ ÆÁÊÌ %s (ÚÕÐÉÎËÁ ÎÁ %s)"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr ""
-#~ "úÂÉÒÁÀÓÑ ×ÓÔÁÎÏ×ÉÔÉ %d íÂ. ÷É ÍÏÖÅÔÅ ÄÏÄÁÔËÏ×Ï ×ÓÔÁÎÏ×ÉÔÉ ¦ÎÛ¦ ÐÒÏÇÒÁÍÉ."
-
-#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
-#~ msgstr "÷ÉÂÒÁÎÏ ÚÁÎÁÄÔÏ ÂÁÇÁÔÏ ÐÁËÅÔ¦×: %dí ÎÅ ÐÏͦÝÁÀÔØÓÑ × %díÂ"
-
-#~ msgid "User name:"
-#~ msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ:"
-
-#~ msgid "Password:"
-#~ msgstr "ðÁÒÏÌØ:"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "îÅ ÍÏÖÕ ÓÔ×ÏÒÉÔÉ ÓÉÓÔÅÍÎÕ ÄÉÓËÅÔÕ HPT.\n"
-#~ "÷É ÍÏÖÅÔÅ ÓÐÒÏÂÕ×ÁÔÉ ÐÅÒÅÚÁÐÕÓÔÉÔÉ ÕÓÔÁÎÏ×ËÕ ¦ ÚÁÄÁÔÉ ÐÁÒÁÍÅÔÒ ``%s''"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "ðÏÔÒ¦ÂÎÏ ÐÅÒÅÚÁÐÕÓÔÉÔÉ ÕÓÔÁÎÏ×ËÕ Ú ÎÏ×ÉÍÉ ÐÁÒÁÍÅÔÒÁÍÉ"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "ðÒÏÃÅÓ ÕÓÔÁÎÏ×ËÉ ÎÅÏÂȦÄÎÏ ÐÅÒÅÚÁÐÕÓÔÉÔÉ ÚÁ×ÁÎÔÁÖÉ×ÛÉÓØ Ú ÄÉÓËÅÔÉ"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ ÄÌÑ ÓÔ×ÏÒÅÎÎÑ ÄÉÓËÅÔÉ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ Ú HTP\n"
-#~ "÷Ó¦ ÄÁΦ ÎÁ Ã¦Ê ÄÉÓËÅÔ¦ ÂÕÄÕÔØ ×ÔÒÁÞÅΦ"
-
-#~ msgid ""
-#~ "Linux does not yet fully support ultra dma 66.\n"
-#~ "As a work-around i can make a custom floppy giving access the hard drive "
-#~ "on ide2 and ide3"
-#~ msgstr ""
-#~ "ì¦ÎÁËÓ ÝÅ ÎÅ ÐÏ×ΦÓÔÀ ЦÄÔÒÉÍÕ¤ ultra dma 66.\n"
-#~ "ñË ÔÉÍÞÁÓÏ×Å Ò¦ÛÅÎÎÑ Ñ ÍÏÖÕ ÓÔ×ÏÒÉÔÉ ÓÐÅæÁÌØÎÕ ÄÉÓËÅÔÕ, ÝÏ\n"
-#~ "ÚÁÂÅÚÐÅÞÉÔØ ÄÏÓÔÕÐ ÄÏ IDE ÄÉÓË¦× ÎÁ ide2 ÔÁ ide3"
-
-#~ msgid "A entry %s already exists"
-#~ msgstr "ðÕÎËÔ %s ×ÖÅ ¦ÓÎÕ¤"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "÷ÉÂ¦Ò ÕÓÔÁÎÏ×ËÁ/ÐÏÎÏ×ÌÅÎÎÑ"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "ñËÅ ×ÉËÏÒÉÓÔÁÎÎÑ ÷É ×ÉÂÉÒÁ¤ÔÅ?"
-
-#~ msgid "Logitech MouseMan/FirstMouse (ps/2)"
-#~ msgstr "Logitech MouseMan/FirstMouse (ps/2)"
-
-#~ msgid "Microsoft IntelliMouse (serial)"
-#~ msgstr "Microsoft IntelliMouse (serial)"
-
-#~ msgid "Logitech MouseMan/FirstMouse (serial)"
-#~ msgstr "Logitech MouseMan/FirstMouse (serial)"
diff --git a/perl-install/share/po/validate.pl b/perl-install/share/po/validate.pl
deleted file mode 100755
index e2383ba9e..000000000
--- a/perl-install/share/po/validate.pl
+++ /dev/null
@@ -1,86 +0,0 @@
-#!/usr/bin/perl -w
-
-#
-# Guillaume Cottenceau (gc@mandrakesoft.com)
-#
-# Copyright 2000 MandrakeSoft
-#
-# This software may be freely redistributed under the terms of the GNU
-# public license.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-
-# Tool to avoid common grammar errors in po files.
-
-
-sub get_file($)
-{
-    local *FIL;
-    open FIL, "$_[0]" or die "Can't open $_[0]";
-    my @file_content = <FIL>;
-    close FIL;
-    my @out;
-    my $msgstr = 0;
-    my $line_number = 0;
-    foreach (@file_content)
-    {
-	$line_number++;
-	/msgid/ and $msgstr = 0;
-	/msgstr/ and $msgstr = 1;
-	$msgstr and push @out, sprintf("%4d ", $line_number).$_;
-    }
-    @out;
-}
-
-
-my $line_number = 0;
-
-# --- Problems potentially common to multiple languages
-
-sub mixed_case($)
-{
-    (/[\^ ][A-Z][A-Z][a-z]/ && !/XFree/ || /[\^ ][a-z][A-Z]/) and print("**.po possible-mixed-case         $_");
-}
-
-sub uppercase_after_comma($)
-{
-    /, [A-Z]/ and print("**.po uppercase-after-comma       $_");
-}
-
-sub lowercase_after_dot($)
-{
-    /\. [a-z]/ and print("**.po lowercase-after-dot         $_");
-}
-
-sub no_space_after_simple_ponct($)
-{
-    /[a-zA-Z\.]+@[a-zA-Z]/ and return;
-    /[,\.][a-zA-Z]/ and print("**.po no-space-after-simple-ponct $_");
-}
-
-sub space_before_simple_ponct($)
-{
-    / \.\./ and return;
-    / [,\.]/ and print("**.po space-before-simple-ponct   $_");
-}
-
-
-
-# --- fr.po
-
-foreach (get_file("fr.po"))
-{
-    /\s*#/ and next;
-    /ez [^ ]+ez/ and print("fr.po infinitive-form-with-ez     $_");
-    /è[ \.,;:]/ and  print("fr.po grave-accent-at-end-of-word $_");
-    (/[éêè][éêè]/ && !/créé/) and print("fr.po strange-accents-succession  $_");
-    /G[nN][uU]\/[lL]inux/ and print("fr.po GNU-slash-Linux-found       $_");
-    mixed_case($_);
-    uppercase_after_comma($_);
-    lowercase_after_dot($_);
-    no_space_after_simple_ponct($_);
-    space_before_simple_ponct($_);
-}
diff --git a/perl-install/share/po/vi.po b/perl-install/share/po/vi.po
deleted file mode 100644
index 2c40dbb64..000000000
--- a/perl-install/share/po/vi.po
+++ /dev/null
@@ -1,10706 +0,0 @@
-# Drake X  in Vietnamese.
-# Copyright (C) 2001 Free Software Foundation, Inc.
-# T.M.THANH <tmthanh@yahoo.com ; tmthanh@vnlinux.org>, 2001.
-# Nguyen Hung Vu <hung@vnlinux.org>, 2001.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-03-14 22:34+0100\n"
-"Last-Translator: Trinh Minh Thanh <tmthanh@yahoo.com>\n"
-"Language-Team: Vietnamese team: Vietlug <http://vnlinux.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=tcvn-5712\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "CÊu h×nh ®éc lËp toµn bé c¸c head"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Dïng Xinerama më réng"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "ChØ cÊu h×nh card \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "CÊu h×nh Multi-head"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"HÖ thèng cña b¹n hç trî cÊu h×nh Multi-head.\n"
-"B¹n muèn lµm g×?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Card ®å häa"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Chän card ®å häa"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Chän X server"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "B¹n muèn cã cÊu h×nh XFree nµo?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Card cña b¹n cã thÓ ®­îc hç trî phÇn cøng t¨ng tèc 3D nh­ng chØ víi XFree %"
-"s.\n"
-"Card cña b¹n ®­îc hç trî bëi XFree %s lo¹i nµy cã thÓ hç trî tèt h¬n khi "
-"dïng 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Card cña b¹n cã thÓ cã hç trî phÇn cøng t¨ng tèc 3D víi XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s víi phÇn cøng t¨ng tèc 3D"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Card cña b¹n cã thÓ cã hç trî phÇn cøng t¨ng tèc 3D víi XFree %s,\n"
-"L­u ý ®©y lµ hç trî cã tÝnh lý thuyÕt nªn nã cã thÓ lµm × m¸y tÝnh cña b¹n."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s víi phÇn cøng t¨ng tèc 3D thö nghiÖm"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Card cña b¹n cã thÓ cã hç trî phÇn cøng t¨ng tèc 3D nh­ng chØ víi XFree %s,\n"
-"L­u ý ®©y lµ hç trî cã tÝnh lý thuyÕt nªn nã cã thÓ lµm × m¸y tÝnh cña b¹n.\n"
-"Card cña b¹n ®­îc hç trî bëi XFree %s lo¹i nµy cã thÓ hç trî tèt h¬n khi "
-"dïng 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (cµi ®Æt driver hiÓn thÞ)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "CÊu h×nh XFree"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Chän dung l­îng bé nhí cña card"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Chän tïy biÕn cho server"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Chän mµn h×nh"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Mµn h×nh"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Hai th«ng sè quan träng lµ tÇn sè quÐt däc, ®©y lµ th«ng sè\n"
-"®Ó toµn bé mµn h×nh ®­îc lµm t­¬i, vµ quan träng nhÊt lµ tÇn sè \n"
-"quÐt ngang, lµ th«ng sè ®Ó hiÓn thÞ dßng quÐt.\n"
-"\n"
-"Quan träng lµ b¹n kh«ng ®Þnh râ lo¹i mµn h×nh cã th«ng sè thÝch hîp,\n"
-"do vËy v­ît qu¸ kh¶ n¨ng cña mµn h×nh: B¹n cã thÓ lµm háng mµn h×nh.\n"
-" NÕu kh«ng râ, h·y chän mét thiÕt lËp võa ph¶i."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "TÇn sè quÐt ngang"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "TÇn sè quÐt däc"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Mµn h×nh ch­a ®­îc cÊu h×nh"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Card ®å häa vÉn ch­a ®­îc cÊu h×nh"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "§é ph©n gi¶i vÉn ch­a ®­îc chän"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "B¹n cã muèn ch¹y thö cÊu h×nh nµy?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Chó ý: thö card ®å ho¹ nµy cã thÓ lµm × m¸y tÝnh cña b¹n"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Ch¹y thö cÊu h×nh nµy"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"h·y thö thay ®æi mét vµi th«ng sè"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "X¶y ra lçi:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Tho¸t sau %d gi©y"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "ThiÕt lËp nµy ®· ®óng ch­a?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "BÞ lçi, h·y thö thay ®æi mét vµi th«ng sè"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "§é ph©n gi¶i"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Chän ®é ph©n gi¶i vµ ®é s©u cña mµu"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Card ®å häa: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "ChÕ ®é Chuyªn gia"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "HiÓn thÞ tÊt c¶"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "§é ph©n gi¶i"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tæ chøc bµn phÝm: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Lo¹i chuét: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "ThiÕt bÞ chuét: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Mµn h×nh: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "TÇn sè quÐt ngang: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "TÇn sè quÐt däc: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Card ®å ho¹: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Card ®å ho¹: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Bé nhí ®å häa: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "§é s©u mµu: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "§é ph©n gi¶i: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 driver: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "ChuÈn bÞ cÊu h×nh X-Window"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "B¹n muèn lµm g×?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Thay ®æi mµn h×nh"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Thay ®æi card ®å häa"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Thay ®æi tïy chän Server"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Thay ®æi ®é ph©n gi¶i"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "HiÓn thÞ th«ng tin"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Thö l¹i"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Tho¸t"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Gi÷ l¹i c¸c thay ®æi?\n"
-"CÊu h×nh hiÖn thêi:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "H·y ®¨ng nhËp l¹i vµo %s ®Ó thay ®æi cã t¸c dông"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "H·y ra khái råi dïng Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "X lóc khëi ®éng"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Cã thÓ ®Æt chÕ ®é khëi ®éng tù ®éng vµo chÕ ®é ®å ho¹.\n"
-"B¹n cã muèn ch¹y chÕ ®é X (®å häa) khi khëi ®éng l¹i?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 mµu (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ngh×n mµu (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ngh×n mµu (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 triÖu mµu (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 tû mµu (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB trë lªn"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA ChuÈn, 640x480 t¹i 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "VGA cao cÊp, 800x600 t¹i 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "T­¬ng thÝch víi 8514, 1024x768 t¹i 87 Hz kÕt hîp (kh«ng cã 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "VGA cao cÊp, 1024x768 t¹i 87 Hz kÕt hîp, 800x600 t¹i 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "VGA cao cÊp më réng, 800x600 t¹i 60 Hz, 640x480 t¹i 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA kh«ng kÕt hîp, 1024x768 t¹i 60 Hz, 800x600 t¹i 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA tÇn sè cao, 1024x768 t¹i 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "§a tÇn cã thÓ ®Æt 1280x1024 t¹i 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "§a tÇn cã thÓ ®Æt 1280x1024 t¹i 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "§a tÇn cã thÓ ®Æt 1280x1024 t¹i 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Mµn h×nh cã thÓ ®Æt 1600x1200 t¹i 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Mµn h×nh cã thÓ ®Æt 1600x1200 t¹i 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Sector ®Çu tiªn cña ph©n vïng khëi ®éng"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Sector ®Çu tiªn cña ®Üa (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "Cµi ®Æt SILO"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "B¹n muèn cµi ®Æt tr×nh khëi ®éng vµo ®©u?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "Cµi ®Æt LILO/grub"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO víi menu v¨n b¶n"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO víi menu ®å ho¹"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Khëi ®éng tõ DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Tïy chän chÝnh cña tr×nh khëi ®éng"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Dïng tr×nh khëi ®éng"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Cµi ®Æt tr×nh khëi ®éng"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "ThiÕt bÞ khëi ®éng"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (kh«ng lµm viÖc víi c¸c BIOS cò)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "§ång ý"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "§ång ý"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "ChÕ ®é Video"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Tr× ho·n tr­íc khi khëi ®éng ¶nh mÆc ®Þnh"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "NhËp mËt khÈu"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "NhËp l¹i mËt khÈu"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Tïy chän dßng lÖnh h¹n chÕ"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "h¹n chÕ"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Xãa /tmp mçi khi khëi ®éng"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Cho biÕt râ dung l­îng RAM (cã %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Cho phÐp ®a lý lÞch"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "HiÓn thÞ dung l­îng RAM theo MB"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Tuú chän ``Tïy chän dßng lÖnh h¹n chÕ'' nghÜa lµ kh«ng cho sö dông nÕu kh«ng "
-"cã mËt khÈu"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "H·y thö l¹i"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "MËt khÈu kh«ng ®óng"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Th«ng ®iÖp cña Init"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Më sù trÔ cña tr×nh c¬ së"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Thêi gian chê khëi ®éng Kernel"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Cho phÐp khëi ®éng CD?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Cho phÐp khëi ®éng OF?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "HÖ ®iÒu hµnh mÆc ®Þnh?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"§©y lµ c¸c môc nhËp kh¸c nhau.\n"
-"B¹n cã thÓ thªm hoÆc thay ®æi c¸c môc hiÖn thêi."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Thªm"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Hoµn thµnh"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Thay ®æi"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "B¹n muèn thªm kiÓu môc nhËp nµo?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "HÖ ®iÒu hµnh kh¸c (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "HÖ ®iÒu hµnh kh¸c (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "HÖ ®iÒu hµnh kh¸c (Windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "¶nh"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Bæ xung"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "§äc-Ghi"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "B¶ng ghi"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Kh«ng an toµn"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Nh·n"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "MÆc ®Þnh"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-size"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "Kh«ng cã Video"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Bá môc nhËp "
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Kh«ng ®­îc ®Ó nh·n trèng"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Nh·n n·y ®­îc dïng råi"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "T×m thÊy giao diÖn %s %s"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "B¹n cßn cã giao diÖn kh¸c n÷a?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "B¹n cã giao diÖn %s nµo kh«ng?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Kh«ng"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Cã"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "H·y xem th«ng tin phÇn cøng"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "§ang cµi ®Æt driver cho card %s %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Thö driver %s nµo?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Trong mét sè tr­êng hîp, driver %s cÇn thªm th«ng tin ®Ó ho¹t ®éng\n"
-"®óng c¸ch, mÆc dï nã vÉn ho¹t ®éng b×nh th­êng. B¹n cã muèn chØ râ\n"
-"tïy chän thªm cho nã hoÆc ®Ó driver th¨m dß th«ng tin mµ\n"
-"nã cÇn? §«i khi, sù th¨m dß lµm m¸y tÝnh bÞ cña b¹n treo, nh­ng nã sÏ\n"
-"kh«ng g©y h­ háng nµo."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Th¨m dß tù ®éng"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "§Þnh râ tïy chän"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "B©y giê b¹n cã thÓ göi tïy chän ®Õn module %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"B©y giê b¹n cã thÓ göi tïy chän ®Õn module %s.\n"
-"Tïy chän cã d¹ng thøc ``tªn=gi¸ trÞ tªn2=gi¸ trÞ2 ...''.\n"
-"VÝ dô, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Tïy chän cña module:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"N¹p module %s kh«ng ®­îc.\n"
-"B¹n cã muèn thö l¹i víi c¸c th«ng sè kh¸c?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(®· thªm %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "MËt khÈu nµy ®¬n gi¶n qu¸"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "NhËp tªn ng­êi dïng"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Tªn ng­êi dïng chØ sö dông ch÷ th­êng, sè , `-' vµ `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Tªn ng­êi dïng nµy ®· ®­îc nhËp vµo råi"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Thªm ng­êi dïng"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"NhËp ng­êi dïng\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "ChÊp thuËn ng­êi dïng"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Tªn thËt"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "Tªn ng­êi dïng"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "BiÓu t­îng"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "§¨ng nhËp tù ®éng"
-
-#: ../../any.pm_.c:757
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Cã thÓ thiÕt lËp khëi ®éng m¸y tù ®éng ®¨ng nhËp mét ng­êi dïng.\n"
-"B¹n cã muèn sö dông tÝnh n¨ng nµy kh«ng?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Chän ng­êi dïng mÆc ®Þnh:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Chän ch¹y tr×nh qu¶n lý window:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "H·y chän ng«n ng÷ sö dông."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "B¹n cã thÓ chän c¸c ng«n ng÷ kh¸c s½n cã sau khi cµi ®Æt"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Toµn bé"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-" Cha`o mu*`ng chu*o*ng tri`nh cho.n he^. ddie^`u ha`nh %s!\n"
-"\n"
-"Ha~y cho.n he^. ddie^`u ha`nh trong danh sa'ch tre^n hay \n"
-"cho*` %d gia^y dde^? kho*?i ddo^.ng he^. ddie^`u ha`nh ma(.c ddi.nh.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Cha`o mu*`ng chu*o*ng tri`nh cho.n he^. ddie^`u ha`nh GRUB!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Du`ng ca'c phi'm %c va` %c dde^? cho.n mu.c nha^.p ddu*o*.c ba^.t s¸ng."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Nha^'n Enter dde^? kho*?i ddo^.ng he^. ddie^`u ha`nh ddu*o*.c cho.n, 'e' "
-"dde^? hie^.u chi?nh"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ca'c le^.nh tru*o*'c khi kho*?i ddo^.ng, hoa(.c 'c' cho do`ng le^.nh."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-"Mu.c nha^.p ba^.t sa'ng se~ ddu*o*.c kho*?i ddo^.ng tu*. ddo^.ng sau %d "
-"gia^y."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "kh«ng ®ñ chç ë trong /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Mµn h×nh nÒn"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:972
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "B¹n muèn cµi ®Æt tr×nh khëi ®éng vµo ®©u?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "vÉn ch­a thùc thi trî gióp.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "CÊu h×nh khu«n thøc khëi ®éng"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_TÖp"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/TÖp/_Ra khái"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Mµn h×nh ph©n lo¹i kiÓu míi"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Mµn h×nh kiÓu míi"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Mµn h×nh truyÒn thèng"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Mµn h×nh truyÒn thèng Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Ch¹y cùc quang lóc khëi ®éng"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "ChÕ ®é Lilo/grub"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"HiÖn thêi b¹n ®ang dïng %s lµm Tr×nh Qu¶n Lý Khëi §éng.\n"
-"NhÊn  lªn CÊu h×nh ®Ó ch¹y ®å thuËt cho thiÕt lËp."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "CÊu h×nh"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "ChÕ ®é khëi ®éng"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "ChÕ ®é hÖ thèng"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Ch¹y hÖ thèng X-Window khi khëi ®éng"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "T«i kh«ng muèn ®¨ng nhËp tù ®éng"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "T«i muèn ®¨ng nhËp tù ®éng víi c¸i nµy (ng­êi dïng, mµn h×nh nÒn)"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Bá qua"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "kh«ng thÓ më /etc/inittab ®Ó ®äc: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Kh«ng cµi ®Æt ®­îc LILO. X¶y ra lçi nh­ sau:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d phót"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 phót"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d gi©y"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Tr­íc hÕt, b¹n h·y sao l­u d÷ liÖu"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "H·y ®äc kü!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"NÕu b¹n ®Þnh dïng aboot, h·y cÈn thËn ®Ó l¹i mét kh«ng gian trèng (2048 "
-"sector lµ ®ñ)\n"
-"t¹i phÇn ®Çu tiªn cña ®Üa"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Lçi"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "§å thuËt"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Míi"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "Tõ xa"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "§iÓm g¾n kÕt"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Tïy chän"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "KiÓu"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "bá g¾n kÕt"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "G¾n kÕt"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Chän ho¹t ®éng"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"B¹n cã mét ph©n vïng FAT lín\n"
-"(th­êng dïng bëi MicroSoft Dos/Windows).\n"
-"§Çu tiªn, b¹n nªn ®Þnh l¹i ®é lín cña ph©n vïng nµy\n"
-"(nhÊp chuét vµo ®ã, råi nhÊp lªn \"LËp l¹i kÝch th­íc\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "H·y nhÊp chuét lªn ph©n vïng"
-
-#: ../../diskdrake.pm_.c:240
-#, fuzzy
-msgid "Please click on a media"
-msgstr "H·y nhÊp chuét lªn ph©n vïng"
-
-#: ../../diskdrake.pm_.c:243
-#, fuzzy
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr "H·y nhÊp chuét lªn ph©n vïng"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr ""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Chi tiÕt"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-#, fuzzy
-msgid "Journalised FS"
-msgstr "§· ghi nhËt ký"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Trèng"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Kh¸c"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "KiÓu hÖ thèng tËp tin:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "T¹o"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Dïng ``%s'' thay thÕ"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Xo¸"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Dïng ``Bá g¾n kÕt'' tr­íc tiªn"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Sau khi thay ®æi kiÓu ph©n vïng %s, mäi d÷ liÖu trªn ®ã sÏ mÊt"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "B¹n muèn g¾n kÕt thiÕt bÞ %s vµo ®©u?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "Tïy chän g¾n kÕt"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "Kh¸c nhau"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "Ph­¬ng tiÖn th¸o l¾p"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "Thay ®æi kiÓu"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "HÖ thèng tËp tin nµo b¹n muèn?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "§ang rµ c¸ch thøc chia sÎ NFS s½n cã"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "§ang rµ c¸ch thøc chia sÎ NFS s½n cã cña m¸y chñ %s"
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr "NÕu danh s¸ch trªn kh«ng cã môc nhËp nh­ mong muèn, h·y nhËp ë ®©y:"
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "M¸y chñ"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "Tµi nguyªn dïng chung"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "§ang rµ c¸ch thøc chia sÎ samba s½n cã"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "§ang rµ c¸ch thøc chia sÎ samba s½n cã cña m¸y chñ %s"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "Chän mét ph©n vïng"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Chän ph©n vïng kh¸c"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Tho¸t ra"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "ChuyÓn sang chÕ ®é Chuyªn gia"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "ChuyÓn sang chÕ ®é b×nh th­êng"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Kh«ng thùc hiÖn"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "VÉn tiÕp tôc b»ng bÊt cø gi¸ nµo?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Tho¸t mµ kh«ng l­u l¹i"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Tho¸t mµ kh«ng ghi b¶ng ph©n vïng?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "B¹n cã muèn l­u c¸c thay ®æi /etc/fstab?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Ph©n chia tù ®éng"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Xo¸ hÕt"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Thªm"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "Th«ng tin æ ®Üa cøng"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Kh«ng ®ñ kh«ng gian ®Ó ph©n chia tù ®éng"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Toµn bé c¸c ph©n vïng chÝnh ®­îc sö dông"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Kh«ng thÓ thªm ph©n vòng"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"§Ó cã thªm ph©n vïng, h·y xo¸ mét ph©n vïng ®Ó cã thÓ t¹o mét ph©n vïng më "
-"réng"
-
-#: ../../diskdrake_interactive.pm_.c:285
-#, fuzzy
-msgid "Save partition table"
-msgstr "Ghi b¶ng ph©n vïng"
-
-#: ../../diskdrake_interactive.pm_.c:286
-#, fuzzy
-msgid "Restore partition table"
-msgstr "B¶ng ph©n vïng cøu gi¶i"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "B¶ng ph©n vïng cøu gi¶i"
-
-#: ../../diskdrake_interactive.pm_.c:289
-#, fuzzy
-msgid "Reload partition table"
-msgstr "B¶ng ph©n vïng cøu gi¶i"
-
-#: ../../diskdrake_interactive.pm_.c:293
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Ph­¬ng tiÖn th¸o l¾p"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Chän tËp tin"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"B¶ng ph©n vïng sao l­u kh«ng cã cïng kÝch th­íc\n"
-"VÉn tiÕp tôc?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "C¶nh b¸o"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"N¹p ®Üa mÒm vµo æ\n"
-"Mäi d÷ liÖu trªn ®Üa sÏ bÞ mÊt"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "§ang cè g¾ng cøu b¶ng ph©n vïng"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "Th«ng tin chi tiÕt"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "§Æt l¹i kÝch th­íc"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "ChuyÓn"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Format"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Ho¹t ®éng"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Thªm vµo RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Thªm vµo LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Gì bá khái RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Gì bá khái LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Thay ®æi RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Dïng cho loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "T¹o ph©n vïng míi"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "B¾t ®Çu sector: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "KÝch th­íc theo MB: "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "KiÓu hÖ thèng tËp tin: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "§iÓm g¾n kÕt:"
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Tïy thÝch: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "§ang format tËp tin loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Thay ®æi kiÓu ph©n vïng"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "ChuyÓn tõ ext2 sang ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "B¹n muèn g¾n kÕt tËp tin loopback %s vµo ®©u?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kh«ng thÓ bá thiÕt lËp ®iÓm g¾n kÕt v× ph©n vïng nµy dïng ®Ó loopback.\n"
-"H·y gì bá loopback tr­íc"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "§ang tÝnh to¸n ph¹m vi hÖ thèng tËp tin FAT"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "§ang lËp l¹i kÝch th­íc"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Ph©n vïng nµy kh«ng thÓ thiÕt lËp l¹i kÝch th­íc"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Mäi d÷ liÖu trªn ph©n vïng nµy nªn ®­îc sao l­u"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Sau khi lËp l¹i kÝch th­íc ph©n vïng %s, mäi d÷ liÖu trªn ®ã sÏ bÞ mÊt"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Chän kÝch th­íc míi"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "KÝch th­íc míi theo MB: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "B¹n muèn chuyÓn nã tíi ®Üa nµo?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "B¹n muèn chuyÓn nã tíi sector nµo?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "§ang chuyÓn"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "§ang chuyÓn ph©n vïng..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "H·y chän RAID ®ang tån t¹i ®Ó thªm vµo"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "míi"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "H·y chän LVM ®ang tån t¹i ®Ó thªm vµo"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "Tªn LVM?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Ph©n vïng nµy kh«ng thÓ dïng ®Ó loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Tªn tËp tin loopback: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-#, fuzzy
-msgid "Give a file name"
-msgstr "Tªn thËt"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "TËp tin ®· ®­îc loopback kh¸c dïng, h·y chän tËp tin kh¸c"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "TËp tin ®ang tån t¹i. Cã dïng kh«ng?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "thiÕt bÞ"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "Møc ®é"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "KÝch th­íc bã"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "H·y thËn träng: thao t¸c nµy nguy hiÓm."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "KiÓu ph©n vïng nµo?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Xin lçi. Kh«ng chÊp thuËn viÖc t¹o /boot qu¸ møc trªn æ ®Üa (lªn cylinder > "
-"1024).\n"
-"HoÆc b¹n dïng LILO th× nã sÏ kh«ng lµm viÖc, hoÆc b¹n kh«ng dïng LILO th× "
-"kh«ng cÇn /boot"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Ph©n vïng b¹n chän ®Ó thªm lµ root (/) ®­îc ®Þnh vÞ vËt lý v­ît qu¸\n"
-"cylinder thø 1024 cña ®Üa cøng , vµ b¹n kh«ng cã ph©n vïng /boot.\n"
-"NÕu ®Þnh dïng tr×nh khëi ®éng LILO, thËn träng thªm mét ph©n vïng /boot"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Ph©n vïng phÇn mÒm RAID ®­îc chän lµ root (/).\n"
-"Kh«ng cã tr×nh khëi ®éng nµo cã thÓ ®iÒu khiÓn nã nÕu thiÕu ph©n vïng /"
-"boot.\n"
-"V× vËy, h·y thËn träng thªm ph©n vïng /boot"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "B¶ng ph©n vïng cña ®Üa %s s¾p ®­îc ghi lªn ®Üa!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "B¹n cÇn khëi ®éng l¹i tr­íc khi thay ®æi cã t¸c dông"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Sau khi format ph©n vïng %s, mäi d÷ liÖu trªn ph©n vïng nµy sÏ bÞ mÊt"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "§ang format"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "§ang format tËp tin loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "§ang format ph©n vïng %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid háng"
-
-#: ../../diskdrake_interactive.pm_.c:894
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Kh«ng ®ñ kh«ng gian trèng ®Ó t¹o c¸c ph©n vïng míi"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:906
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Kh«ng ®ñ kh«ng gian trèng ®Ó t¹o c¸c ph©n vïng míi"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "§ang gì bá LPD..."
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "ThiÕt bÞ:"
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Tªn æ ®Üa trong DOS: %s (chØ lµ pháng ®o¸n)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "KiÓu:"
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Tªn:"
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "B¾t ®Çu: sector %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "KÝch th­íc: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sector"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Cylinder %d to cylinder %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "§· format\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Ch­a format\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "§· ®­îc g¾n kÕt\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "TËp tin Loopback: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Ph©n vïng ®­îc khëi ®éng mÆc ®Þnh\n"
-"    (cho MS-DOS khëi ®éng, kh«ng cho lilo)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "CÊp %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "KÝch th­íc bã %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "æ ®Üa RAID %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Tªn tËp tin Loopback: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"NgÉu nhiªn mµ ph©n vïng nµy lµ\n"
-"mét ph©n vïng cña ®Üa, cã lÏ b¹n nªn\n"
-"®Ó riªng ra.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"§©y lµ ph©n vïng bÉy khëi ®éng\n"
-"®Æc biÖt ®Ó\n"
-"khëi ®éng kÐp hÖ thèng cña b¹n.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "KÝch th­íc: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometry: %s cylinders, %s heads, %s sectors\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Th«ng tin: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "æ ®Üa LVM %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "KiÓu b¶ng ph©n vïng: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "on bus %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Tïy chän: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "format %s cña %s kh«ng ®­îc"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Kh«ng biÕt c¸ch format %s theo kiÓu %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "G¾n kÕt kh«ng ®­îc"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck kh«ng ®­îc víi  exit code %d hay signal %d"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "G¾n kÕt kh«ng ®­îc: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "Lçi khi ®ang bá g¾n kÕt %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "®¬n gi¶n"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Kh«ng thÓ sö dông JFS  cho c¸c ph©n vïng nhá h¬n 16MB"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "B¹n kh«ng thÓ dïng ReiserFS  cho c¸c ph©n vïng nhá h¬n 32MB"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "§iÓm g¾n kÕt ph¶i b¾t ®Çu víi / ®øng ®Çu"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "§ang cã mét ph©n vïng cã ®iÓm g¾n kÕt %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Kh«ng thÓ dïng mét æ lý luËn LVM cho ®iÓm g¾n kÕt %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Th­ môc nµy nªn ®Æt trong hÖ thèng tËp tin root"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"B¹n cÇn mét hÖ thèng tËp tin thùc sù (ext2, reiserfs) cho ®iÓm g¾n kÕt nµy\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Lçi khi më %s ®Ó ghi: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"BÞ lçi - kh«ng t×m thÊy thiÕt bÞ hîp lÖ ®Ó t¹o hÖ thèng tËp tin míi. H·y "
-"kiÓm tra phÇn cøng ®Ó t×m nguyªn nh©n g©y ra lçi"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Kh«ng cã bÊt kú ph©n vïng nµo!"
-
-#: ../../help.pm_.c:13
-#, fuzzy
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux lµ mét hÖ thèng ®a ng­êi dïng, nã cho phÐp mçi mét ng­êi dïng cã "
-"riªng\n"
-"c¸c tïy thÝch, tËp tin vµ v.v.... B¹n cã thÓ ®äc User Guide ®Ó biÕt thªm "
-"®iÒu nµy.\n"
-"Nh­ng kh«ng nh­ Root, lµ ng­êi qu¶n trÞ, c¸c ng­êi dïng mµ b¹n sÏ thªm vµo\n"
-"®©y sÏ kh«ng ®­îc quyÒn thay ®æi bÊt kú c¸i g× ngoµi c¸c tËp tin vµ cÊu h×nh "
-"cña\n"
-"riªng hä. B¹n sÏ ph¶i t¹o ra mét ng­êi dïng th­êng lÖ cho riªng m×nh.\n"
-"Account ®ã lµ n¬i b¹n nªn dïng ®Ó ®¨ng nhËp cho c«ng viÖc hµng ngµy. MÆc\n"
-"dï b¹n còng cã thÓ ®¨ng nhËp hµng ngµy lµ Root, nh­ng sÏ rÊt nguy hiÓm!\n"
-"ChØ mét lçi nhá nhÊt còng cã thÓ lµm hÖ thèng kh«ng ho¹t ®éng n÷a. NÕu b¹n\n"
-"g©y mét lçi trÇm träng khi lµ ng­êi dïng th«ng th­êng, b¹n cã thÓ chØ mÊt "
-"mét sè\n"
-"th«ng tin mµ kh«ng ¶nh h­ëng tíi toµn bé hÖ thèng.\n"
-"\n"
-"§Çu tiªn, b¹n ph¶i nhËp tªn thËt cña m×nh. §iÒu nµy kh«ng ph¶i b¾t buéc mµ "
-"thùc\n"
-"tÕ b¹n cã thÓ nhËp bÊt kú c¸i g× m×nh muèn. Sau ®ã, drakX sÏ lÊy tõ ®Çu tiªn "
-"mµ\n"
-"b¹n nhËp vµo « ®Ó ®em nhËp vµo « Tªn Ng­êi Dïng (User name). §©y lµ tªn\n"
-"mµ ng­êi dïng nµy sÏ sö dông ®Ó ®¨ng nhËp vµo hÖ thèng. B¹n cã thÓ thay ®æi\n"
-"nã. Sau ®ã b¹n ph¶i nhËp mét mËt khÈu vµo ®©y. MËt khÈu cña ng­êi dïngth«ng\n"
-"th­êng kh«ng cã vai trß quan träng nh­ Root nh×n trªn quan ®iÓm b¶o mËt, "
-"nh­ng\n"
-"®õng sao nh·ng nã sau nµy, v× ®ã lµ nguy c¬ ®èi víi c¸c tËp tin cña b¹n.\n"
-"\n"
-"NÕu nhÊn lªn ChÊp nhËn ng­êi dïng, th× sau ®ã b¹n cã thÓ thªm bao nhiªu n÷a\n"
-"còng ®­îc. Thªm ng­êi dïng cho ng­êi kh¸c: anh chÞ em cña b¹n vv.... Khi ®·\n"
-"thªm xong mäi ng­êi dïng mµ b¹n muèn, h·y chän Hoµn thµnh.\n"
-"\n"
-"NhÊn vµo nót N©ng cao ®Ó cho phÐp b¹n thay ®æi Shell mÆc ®Þnh cho ng­êi\n"
-"dïng ®ã (mÆc ®Þnh lµ bash)."
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Trªn ®©y lµ danh s¸ch c¸c ph©n vïng Linux hiÖn cã trªn \n"
-"æ cøng cña b¹n. B¹n cã thÓ gi÷ c¸c lùa chän do ®å thuËt t¹o ra, chóng thÝch "
-"hîp cho\n"
-"viÖc sö dông th«ng th­êng. NÕu b¹n thay ®æi c¸c lùa chän nµy, Ýt nhÊt b¹n "
-"ph¶i ®Þnh\n"
-"ra mét ph©n vïng cho root (\"/\"). §õng chän ph©n vïng nµy nhá qu¸ v× b¹n sÏ "
-"kh«ng thÓ cµi\n"
-"®Æt ®ñ phÇn mÒm. NÕu b¹n muèn ®Æt d÷ liÖu lªn mét ph©n vïng riªng biÖt,\n"
-"b¹n còng cÇn chän  \"/home\" (chØ lµm ®­îc nÕu b¹n cã s½n\n"
-"h¬n mét ph©n vïng Linux).\n"
-"\n"
-"\n"
-"VÒ th«ng tin, mçi ph©n vïng ®­îc ghi nh­ sau: \"Tªn\", \"Dung l­îng\".\n"
-"\n"
-"\n"
-"\"Tªn\" cã m· nh­ sau: \"kiÓu æ cøng\", \"sè æ cøng\",\n"
-"\"sè ph©n vïng\" (vÝ dô, \"hda1\").\n"
-"\n"
-"\n"
-"\"KiÓu æ cøng\" lµ \"hd\" nÕu æ cøng cña b¹n lµ IDE vµ \"sd\"\n"
-"nÕu lµ lo¹i SCSI .\n"
-"\n"
-"\n"
-"\"Sè æ cøng\" lu«n lµ ch÷ c¸i sau \"hd\" hoÆc \"sd\". Víi c¸c æ cøng IDE:\n"
-"\n"
-"   * \"a\" lµ \"æ cøng chÝnh nèi víi ®iÒu khiÓn IDE ®Çu tiªn\",\n"
-"\n"
-"   * \"b\" lµ \"æ cøng phô nèi víi ®iÒu khiÓn IDE ®Çu tiªn\",\n"
-"\n"
-"   * \"c\" lµ \"æ cøng chÝnh nèi víi ®iÒu khiÓn IDE thø hai\",\n"
-"\n"
-"   * \"d\" lµ \"æ cøng phô nèi víi ®iÒu khiÓn IDE thø hai\".\n"
-"\n"
-"\n"
-"Víi c¸c æ ®Üa SCSI, \"a\" lµ \"æ cøng ®Çu tiªn\", \"b\" lµ \"æ cøng thø hai"
-"\", v.v..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"B©y giê lµ lóc cÇn chØ ®Þnh ch­¬ng tr×nh nµo b¹n muèn cµi ®Æt vµo hÖ thèng.\n"
-"Cã s½n hµng ngh×n gãi tin ®Ó dïng víi Mandrake Linux, b¹n kh«ng cÇn ph¶i\n"
-"biÕt hÕt vÒ chóng mét c¸ch t­êng tËn.\n"
-"\n"
-"NÕu b¹n thùc hiÖn viÖc cµi ®Æt chuÈn tõ CDROM, ®Çu tiªn, b¹n ®­îc nh¾c vÒ\n"
-"viÖc chØ ra c¸c CD mµ b¹n ®ang cã. KiÓm vµo c¸c hép t­¬ng øng víi c¸c CD\n"
-"mµ b¹n ®ang cã vµ nhÊn nót OK.\n"
-"\n"
-"C¸c gãi tin ®­îc ph©n lo¹i theo ®Æc tr­ng sö dông cña m¸y tÝnh b¹n dïng.\n"
-"Tù b¶n th©n c¸c nhãm ®­îc ph©n lo¹i lµm bèn phÇn:\n"
-"\n"
-" * Tr¹m lµm viÖc: nÕu m¸y tÝnh sÏ ®­îc dïng lµm m¸y tr¹m, h·y chän thªm\n"
-"mét hay nhiÒu nhãm t­¬ng øng.\n"
-"\n"
-" * M«i tr­êng ®å häa: h·y chän m«i tr­êng ®å häa mµ b¹n ­a thÝch.\n"
-"Chän Ýt nhÊt mét m«i tr­êng nÕu muèn cã mét tr¹m lµm viÖc ®å häa!\n"
-"\n"
-" * Ph¸t triÓn: nÕu m¸y tÝnh ®­îc dïng ®Ó lËp tr×nh, h·y chän c¸c nhãm mong\n"
-"muèn.\n"
-"\n"
-" * M¸y chñ: nÕu ®Þnh dïng m¸y nµy lµm m¸y chñ, t¹i ®©y b¹n cã thÓ chän\n"
-"c¸c dÞch vô phæ biÕn nhÊt ®Ó thùc hiÖn cµi ®Æt vµo m¸y\n"
-"tÝnh.\n"
-"\n"
-"H¬ con chá chuét lªn tªn nhãm th× sÏ hiÓn thÞ mét ®o¹n gi¶i thÝch ng¾n vÒ\n"
-"nhãm ®ã.\n"
-"\n"
-"NhÊn lªn nót N©ng cao, sÏ cho phÐp b¹n chän tïy chän c¸c gãi tin cã\n"
-"tÝnh c¸ nh©n. §iÒu nµy cã Ých khi b¹n biÕt râ vÒ c¸c gãi tin hay khi b¹n\n"
-"muèn kiÓm so¸t toµn bé c¸c ch­¬ng tr×nh sÏ ®­îc cµi ®Æt.\n"
-"\n"
-"NÕu thùc hiÖn cµi ®Æt theo chÕ ®é ``CËp nhËt'', b¹n cã thÓ bá chän toµn\n"
-"bé c¸c nhãm ®Ó tr¸nh viÖc cµi ®Æt gãi míi vµ chØ söa ch÷a hay cËp nhËt\n"
-"hÖ thèng hiÖn thêi.\n"
-"\n"
-"Cuèi cïng, tïy thuéc vµ viÖc cã chän c¸c gãi riªng hay kh«ng, b¹n sÏ thÊy\n"
-"mét c©y chøa toµn bé c¸c gãi ®­îc ph©n lo¹i theo c¸c nhãm vµ c¸c\n"
-"nhãm con. Khi duyÖt c©y nµy, b¹n cã thÓ chän toµn bé c¸c nhãm, nhãm con,\n"
-"hoÆc c¸c gãi ®¬n thuÇn.\n"
-"\n"
-"Khi b¹n chän mét gãi n»m trong c©y, mét ®o¹n m« t¶ xuÊt hiÖn ë bªn ph¶i.\n"
-"Khi kÕt thóc viÖc lùa chän c¸c gãi, h·y nhÊn nót Cµi ®Æt. Qu¸\n"
-"tr×nh cµi ®Æt sÏ tù diÔn ra. NÕu ®· chän rÊt nhiÒu gãi ®Ó cµi ®Æt,\n"
-"b¹n cã thÓ ®i pha mét ly cµ phª ®Ó uèng.\n"
-"\n"
-"!! NÕu gÆp mét gãi dÞch vô m¸y chñ ®· ®­îc chän, kh«ng kÓ lµ do chñ ý hay lµ "
-"do\n"
-"gãi ®ã lµ mét thµnh phÇn cña mét nhãm; b¹n sÏ ®­îc ®Ò nghÞ x¸c nhËn lµ\n"
-"b¹n thùc sù muèn c¸c dÞch vô m¸y chñ nµy ®­îc cµi ®Æt. C¸c dÞch\n"
-"vô m¸y chñ sÏ khëi ch¹y theo mÆc ®Þnh khi khëi ®éng m¸y. NÕu chóng ®­îc\n"
-"xem lµ an toµn vµo lóc ph¸t hµnh, th× sau nµy vÉn cã thÓ cã lç hæng b¶o mËt "
-"®­îc\n"
-"ph¸t hiÖn. NÕu b¹n kh«ng biÕt t­êng tËn ®iÒu nµy, ®¬n gi¶n lµ nhÊn\n"
-"vµo Kh«ng. NhÊn Cã th× sÏ cµi ®Æt c¸c dÞch vô ®­îc liÖt kª vµ theo mÆc ®Þnh\n"
-"chóng sÏ ®­îc ch¹y. !!\n"
-"\n"
-"Tïy chän Tù §éng C¸c Phô Thuéc sÏ t¾t c¸c th«ng ®iÖp c¶nh b¸o\n"
-"vµ ch­¬ng tr×nh cµi ®Æt sÏ tù ®éng chän gãi cã sù phô thuéc vµo mét\n"
-"gãi kh¸c mµ b¹n ®· chän."
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-#, fuzzy
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"NÕu b¹n muèn kÕt nèi m¸y tÝnh víi Internet hay m¹ng lµm viÖc côc\n"
-"bé, h·y chän tïy chän chÝnh x¸c. H·y bËt thiÕt bÞ lªn tr­íc khi chän ®óng\n"
-"tïy chän ®Ó cho DrakX tù ®éng ph¸t hiÖn ra nã.\n"
-"\n"
-"Mandrake Linux cho phÐp thùc hiÖn cÊu h×nh kÕt nèi Internet trong khi cµi "
-"®Æt.\n"
-"C¸c kÕt nèi cã s½n : modem truyÒn thèng, ISDN modem, kÕt nèi ADSL, modem\n"
-"c¸p, vµ cuèi cïng lµ kÕt nèi LAN ®¬n gi¶n (Ethernet).\n"
-"\n"
-"Chóng t«i kh«ng nªu chi tiÕt cho tõng cÊu h×nh ë ®©y. §¬n gi¶n lµ b¹n cÇn\n"
-"cã trong tay mäi th«ng sè tõ nhµ cung cÊp dÞch vô Internet hay nhµ qu¶n trÞ\n"
-"hÖ thèng.\n"
-"\n"
-"B¹n cã thÓ tham kh¶o ch­¬ng h­íng dÉn vÒ c¸c th«ng tin chi tiÕt cho viÖc "
-"cÊu\n"
-"h×nh kÕt nèi Internet, hoÆc ®¬n gi¶n lµ ®îi cho ®Õn khi hÖ thèng ®· ®­îc cµi "
-"®Æt\n"
-"vµ sö dông ch­¬ng tr×nh ®­îc miªu t¶ ë ®ã ®Ó thùc hiÖn cÊu h×nh kÕt nèi.\n"
-"\n"
-"NÕu b¹n kh«ng cã bÊt kú mét kÕt nèi Internet hay m¹ng lµm viÖc côc bé nµo, "
-"h·y chän\n"
-"\"T¾t chøc n¨ng m¹ng\".\n"
-"\n"
-"NÕu b¹n muèn thùc hiÖn viÖc cÊu h×nh m¹ng lµm viÖc sau khi cµi ®Æt xong, "
-"hoÆc\n"
-"lµ b¹n ®· thùc hiÖn xong cÊu h×nh kÕt nèi m¹ng, nhÊn \"Hoµn thµnh\"."
-
-#: ../../help.pm_.c:172
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"B©y giê cã thÓ chän khëi ch¹y dÞch vô nµo vµo lóc khëi ®éng (hÖ thèng).\n"
-"\n"
-"§©y lµ toµn bé c¸c dÞch vô s½n cã ®· ®­îc qu¸ tr×nh cµi ®Æt hiÖn thêi t¹o "
-"ra.\n"
-"H·y xem xÐt chóng cÈn thËn vµ bá chän nh÷ng g× kh«ng cÇn ®Õn lóc khëi ®éng.\n"
-"\n"
-"B¹n cã thÓ nhËn ®­îc mét ®o¹n chó gi¶i ng¾n vÒ dÞch vô khi ®Æt con chá chuét "
-"lªn\n"
-"tªn dÞch vô. NÕu kh«ng biÕt râ dÞch vô ®ã h÷u Ých hay kh«ng, ®Ó an toµn, "
-"h·y\n"
-"bá ®ã theo kiÓu mÆc ®Þnh.\n"
-"\n"
-"ThËt thËn träng trong b­íc nµy nÕu b¹n ®Þnh dïng m¸y nµy lµm m¸y chñ: Cã\n"
-"thÓ b¹n sÏ kh«ng muèn khëi ch¹y c¸c dÞch vô kh«ng cÇn ®Õn. Nªn\n"
-"nhí lµ mét sè dÞch vô cã thÓ g©y nguy hiÓm khi chóng ®­îc ch¹y trªn m¸y "
-"chñ.\n"
-"Nãi chung, chØ chän c¸c dÞch vô mµ b¹n thùc sù cÇn ®Õn chóng."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux qu¶n lý thêi gian theo GMT (Greenwich Manage Time)\n"
-"vµ chuyÓn ®æi nã sang giê ®Þa ph­¬ng dùa vµo mói giê b¹n chän."
-
-#: ../../help.pm_.c:192
-#, fuzzy
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-"X (HÖ Thèng Cöa Sæ X) lµ h¹t nh©n cña giao diÖn ®å häa GNU/Linux trªn\n"
-"®ã, mäi m«i tr­êng ®å häa (KDE, Gnome, AfterStep, WindowMaker...)\n"
-"®­îc bÖn l¹i víi  Mandrake Linux. Trong phÇn nµy, drakX sÏ cè g¾ng tù ®éng\n"
-"cÊu h×nh X.\n"
-"\n"
-"Nã rÊt hiÕm khi bÞ trôc trÆc. ChØ cã mét nguyªn nh©n duy nhÊt khiÕn nã thÊt "
-"b¹i\n"
-"lµ v× phÇn cøng qu¸ cò (hay qu¸ míi). NÕu thµnh c«ng, nã sÏ khëi ®éng X tù\n"
-"®éng víi ®é ph©n gi¶i tèt nhÊt theo kh¶ n¨ng cã thÓ ®­îc tïy thuéc vµo "
-"kÝchth­íc\n"
-"monitor. Sau ®ã, mét cöa sæ sÏ xuÊt hiÖn vµ hái xem b¹n cã nh×n thÊy kh«ng.\n"
-"\n"
-"NÕu chän thùc hiÖn cµi ®Æt kiÓu Chuyªn gia, b¹n sÏ sö dông ®å thuËt cÊu h×nh "
-"X.\n"
-"H·y ®äc phÇn t­¬ng øng ë tµi liÖu h­íng dÉn ®Ó biÕt thªm th«ng tin vÒ ®å "
-"thuËt\n"
-"nµy.\n"
-"\n"
-"NÕu b¹n nh×n thÊy mét th«ng ®iÖp vµ tr¶ lêi Cã, th× drakX sÏ thùc hiÖn b­íc "
-"tiÕp theo.\n"
-"NÕu b¹n kh«ng nh×n thÊy th«ng ®iÖp, th× ®¬n gi¶n lµ v× cÊu h×nh ®· bÞ sai\n"
-"vµ phÐp thö sÏ tù ®éng kÕt thóc sau 10 gi©y, mµn h×nh ®­îc phôc håi l¹i.\n"
-"\n"
-"Cã thÓ x¶y ra tr­êng hîp lÇn ch¹y thö ®Çu tiªn kh«ng hiÓn thÞ tèt (mµn h×nh "
-"qu¸ nhá,\n"
-"lÖch tr¸i hoÆc ph¶i...). §ã lµ lý do t¹i sao, ngay c¶ khi X khëi ch¹y ®óng, "
-"drakX\n"
-"sÏ hái tiÕp xem cÊu h×nh ®· ®¹t yªu cÇu ch­a vµ ®­a ra ®Ò xuÊt thay ®æi nã\n"
-"b»ng viÖc hiÓn thÞ mét danh s¸ch cã tÝnh kh¶ thi mµ nã t×m thÊy vµ ®Ò nghÞ "
-"chän.\n"
-"\n"
-"Ph­¬ng s¸ch cuèi cïng, nÕu b¹n vÉn kh«ng ch¹y ®­îc X, h·y chän Thay ®æi\n"
-"card ®å häa, chän card kh«ng ®­îc liÖt kª, vµ khi ®­îc nh¾c lµ trªn server "
-"nµo, h·y chän\n"
-"FBDev. §©y lµ mét tïy chän an toµn vµ nã lµm viÖc víi bÊt kú card ®å häa "
-"nµo. Råi\n"
-"chän Thö l¹i ®Ó x¸c ®Þnh.\n"
-"\n"
-"Cuèi cïng, b¹n sÏ ®­îc hái vµo thêi ®iÓm nµo th× b¹n muèn nh×n thÊy giao "
-"diÖn ®å häa lóc\n"
-"khëi ®éng. L­u ý lµ b¹n sÏ ®­îc hái nh­ vËy ngay c¶ khi b¹n chän kh«ng ch¹y "
-"thö\n"
-"cÊu h×nh nµy. HiÓn nhiªn lµ b¹n muèn tr¶ lêi Kh«ng nÕu nh­ m¸y cña b¹n sÏ "
-"ho¹t ®éng\n"
-"nh­ mét m¸y chñ hoÆc khi b¹n kh«ng thµnh c«ng trong viÖc cÊu h×nh."
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:231
-#, fuzzy
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"CDROM cña Mandrake Linux cã chÕ ®é cøu gi¶i. B¹n cã thÓ truy cËp nã b»ng\n"
-"c¸ch khëi ®éng tõ CDROM, nhÊn phÝm >>F1<< vµ gâ  >>rescue<< t¹i dÊu\n"
-"nh¾c. Nh­ng trong tr­êng hîp m¸y tÝnh kh«ng thÓ khëi ®éng tõ CDROM, h·y trë "
-"l¹i\n"
-"b­íc nµy ®Ó nhËn sù chØ dÉn trong Ýt nhÊt hai th­êng hîp:\n"
-"\n"
-" * Khi cµi ®Æt tr×nh n¹p khëi ®éng, drakX sÏ ghi l¹i boot sector (MBR) cña "
-"æ\n"
-"®Üa cøng chÝnh (trõ khi b¹n sö dông mét tr×nh qu¶n lý khëi ®éng kh¸c) do ®ã "
-"b¹n\n"
-"cã thÓ khëi ch¹y Windows hoÆc GNU/Linux (nÕu hÖ thèng cña b¹n cã cµi ®Æt "
-"Windows).\n"
-"NÕu cÇn ph¶i cµi l¹i Windows, qu¸ tr×nh cµi ®Æt Microsoft sÏ ghi l¹i lªn\n"
-"boot sector, vµ nh­ vËy b¹n sÏ kh«ng thÓ khëi ch¹y GNU/Linux!\n"
-"\n"
-" * NÕu gÆp vÊn ®Ò nµy vµ b¹n kh«ng thÓ khëi ch¹y GNU/Linux tõ ®Üa cøng, ®Üa\n"
-"mÒm sÏ lµ ph­¬ng tiÖn duy nhÊt ®Ó khëi ch¹y GNU/Linux. Nã chøa mét sè\n"
-"c«ng cô hÖ thèng cÇn thiÕt ®Ó phôc håi l¹i hÖ thèng ®· bÞ ®æ vì (crashed) do "
-"sù\n"
-"cè nguån ®iÖn, mét lçi ®¸nh m¸y v« ý, mét lçi gâ phÝm trong mËt khÈu, vµ v."
-"v....\n"
-"\n"
-"Khi nhÊn chuét vµo b­íc nµy, b¹n sÏ ®­îc yªu cÇu n¹p mét ®Üa mÒm vµo æ.\n"
-"§Üa mÒm nµy ph¶i lµ ®Üa s¹ch hoÆc chØ chøa c¸c d÷ liÖu mµ\n"
-"b¹n kh«ng cÇn n÷a. B¹n sÏ kh«ng ph¶i thùc hiÖn format ®Üa; drakX sÏ ghi l¹i\n"
-"toµn bé ®Üa."
-
-#: ../../help.pm_.c:255
-#, fuzzy
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Lóc nµy, b¹n cÇn chän n¬i cµi ®Æt hÖ ®iÒu hµnh Mandrake Linux lªn\n"
-"æ ®Üa cøng. NÕu æ ®Üa trèng hoÆc ®ang cã mét hÖ ®iÒu hµnh sö\n"
-"dông toµn bé kh«ng gian s½n cã trªn ®Üa, b¹n cÇn ph¶i thùc hiÖn ph©n vïng.\n"
-"VÒ c¬ b¶n, ph©n vïng æ ®Üa cøng lµ t¹o c¸c æ ®Üa logic ®Ó cÊp kh«ng gian "
-"cho\n"
-"viÖc cµi ®Æt hÖ thèng Mandrake Linux míi.\n"
-"\n"
-"Do t¸c dông cña qu¸ tr×nh ph©n vïng th­êng kh«ng quay ng­îc l¹i ®­îc,\n"
-"viÖc ph©n vïng cã khi g©y lo sî vµ c¨ng th¼ng nÕu b¹n kh«ng cã kinh nghiÖm.\n"
-"Hy väng ®©y lµ mét ®å thuËt gióp ®¬n gi¶n hãa qu¸ tr×nh nµy. Tr­íc khi b¾t "
-"®Çu,\n"
-"h·y xem tµi liÖu h­íng dÉn vµ thong th¶ tiÕn hµnh.\n"
-"\n"
-"NÕu thùc hiÖn cµi ®Æt ë chÕ ®é Chuyªn gia, b¹n sÏ dïng c«ng cô ph©n vïng "
-"cña\n"
-"Mandrake Linux: DiskDrake;. Nã cho phÐp b¹n ®Æt chÝnh x¸c c¸c ph©n vïng. "
-"H·y\n"
-"xem ch­¬ng DiskDrake trong tµi liÖu; c¸ch sö dông t­¬ng tù. Cã thÓ dïng ®å "
-"thuËt\n"
-"tõ giao diÖn cµi ®Æt ®· ®­îc m« t¶ ë ®©y b»ng nhÊp chuét lªn nót\n"
-"§å thuËt n»m trªn giao diÖn.\n"
-"\n"
-"NÕu c¸c ph©n vïng ®· ®­îc ®Þnh s½n råi (tõ lÇn cµi ®Æt tr­íc hay b»ng\n"
-"c«ng cô ph©n vïng kh¸c), b¹n chØ viÖc chän chóng ®Ó thùc hiÖn cµi ®Æt hÖ\n"
-"thèng Linux.\n"
-"\n"
-"NÕu c¸c ph©n vïng ch­a ®­îc ®Þnh ra, b¹n cÇn t¹o lËp chóng. §Ó thùc hiÖn,\n"
-"h·y dïng ®å thuËt s½n cã ë trªn. Tïy thuéc vµo cÊu h×nh æ ®Üa cøng,\n"
-"s½n cã vµi tïy chän nh­ sau:\n"
-"\n"
-" * Dïng kh«ng gian trèng: nã sÏ tù ®éng ph©n vïng æ ®Üa trèng hiÖn\n"
-"cã; b¹n sÏ kh«ng ph¶i lo bÊt cø ®iÒu g×.\n"
-"\n"
-" * Dïng ph©n vïng hiÖn cã: ®å thuËt sÏ ph¸t hiÖn ra c¸c ph©n vïng Linux "
-"hiÖn\n"
-"cã trªn æ ®Üa cøng. NÕu b¹n muèn gi÷ chóng, h·y dïng tïy chän nµy.\n"
-"\n"
-" * Xãa toµn bé æ ®Üa: nÕu b¹n muèn xãa toµn bé d÷ liÖu vµ c¸c ph©n vïng hiÖn "
-"cã\n"
-"trªn æ ®Üa cøng vµ thay thÕ chóng b»ng hÖ thèng Mandrake Linux míi, b¹n\n"
-"cã thÓ dïng tïy chän nµy. H·y thËn träng víi gi¶i ph¸p nµy, b¹n sÏ kh«ng "
-"thÓ\n"
-"thay ®æi ®­îc n÷a sau khi ®· kh¼ng ®Þnh.\n"
-"\n"
-" * Dïng kh«ng gian trèng trªn ph©n vïng cña Windows: nÕu Microsoft Windows "
-"®· cµi\n"
-"lªn æ ®Üa cøng vµ dïng toµn bé kh«ng gian ®Üa, b¹n ph¶i t¹o kh«ng gian "
-"trèng\n"
-"cho d÷ liÖu cña Linux. §Ó thùc hiÖn, b¹n cã thÓ xãa ph©n vïng Microsoft "
-"Windows vµ\n"
-"d÷ liÖu (xem \"Xãa toµn bé ®Üa\" hoÆc \"ChÕ ®é Chuyªn gia\") hoÆc lËp l¹i "
-"kÝch th­íc\n"
-"ph©n vïng cña Microsoft Windows. ViÖc lËp l¹i kÝch th­íc kh«ng g©y mÊt d÷ "
-"liÖu.\n"
-"Nªn dïng gi¶i ph¸p nµy nÕu b¹n muèn dïng c¶ Mandrake Linux vµ Microsoft\n"
-"Windows trªn cïng mét m¸y.\n"
-"\n"
-"   Tr­íc khi chän gi¶i ph¸p nµy, h·y hiÓu r»ng kÝch th­íc ph©n vïng cña\n"
-"Microsoft Windows sÏ nhá h¬n hiÖn t¹i. Cã nghÜa lµ b¹n sÏ cã Ýtkh«ng\n"
-"gian trèng h¬n cho Microsoft Windows ®Ó l­u tr÷ d÷ liÖu hay cµi ®Æt phÇn\n"
-"mÒm míi.\n"
-"\n"
-" * Gì bá Windows: nã sÏ xo¸ mäi thø cã trªn æ ®Üa vµ b¾t ®Çu lµm s¹ch\n"
-"vµ thùc hiÖn ph©n vïng tõ ban ®Çu. Mäi d÷ liÖu trªn ®Üa sÏ bÞ mÊt.\n"
-"\n"
-"   !! NÕu b¹n dïng tïy chän nµy, mäi d÷ liÖu cã trªn ®Üa sÏ bÞ xo¸ s¹ch. !!\n"
-"\n"
-" * ChÕ ®é Chuyªn gia: NÕu b¹n muèn tù ph©n vïng æ ®Üa, h·y dïng tïy chän\n"
-"nµy. H·y thËn träng khi chän gi¶i ph¸p nµy. Nã rÊt m¹nh nh­ng còng rÊt\n"
-"nguy hiÓm. B¹n cã thÓ dÔ dµng bÞ mÊt toµn bé d÷ liÖu. Do ®ã, ®õng chän gi¶i\n"
-"ph¸p nµy trõ khi b¹n biÕt viÖc m×nh lµm."
-
-#: ../../help.pm_.c:319
-#, fuzzy
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"B©y giê, qu¸ tr×nh cµi ®Æt ®· hoµn thµnh vµ hÖ thèng GNU/Linux ®· s½n sµng "
-"®Ó sö\n"
-"dông. H·y nhÊn vµo OK ®Ó khëi ®éng l¹i hÖ thèng. B¹n cã thÓ ch¹y Linux hay "
-"Windows,\n"
-"bÊt kú c¸i nµo b¹n muèn (nÕu cã khëi ®éng kÐp), ngay khi m¸y tÝnh khëi ®éng\n"
-"l¹i.\n"
-"\n"
-"Nót N©ng cao sÏ tr×nh ra thªm hai nót n÷a ®Ó:\n"
-"\n"
-" * T¹o ®Üa mÒm cµi ®Æt tù ®éng: ®Ó t¹o mét ®Üa mÒm cµi ®Æt mµ nã sÏ tù\n"
-"®éng thùc hiÖn tßan bé mét qu¸ tr×nh cµi ®Æt kh«ng cã trî gióp cña ®iÒu\n"
-"hµnh viªn, gièng nh­ viÖc cµi ®Æt mµ b¹n võa cÊu h×nh.\n"
-"\n"
-"   L­u ý lµ cã hai tïy chän kh¸c nhau sau khi b¹n nhÊn chuét :\n"
-"\n"
-"    * Thùc hiÖn l¹i: ®©y lµ mét qu¸ tr×nh cµi ®Æt tù ®éng tõng phÇn gièng "
-"nh­\n"
-"viÖc ph©n vïng vÉn cã t­¬ng t¸c.\n"
-"\n"
-"    * Tù ®éng hãa: thùc hiÖn cµi ®Æt hßa toµn tù ®éng: æ ®Üa cøng ®­îc ghi "
-"l¹i hoµn toµn, mäi\n"
-"d÷ liÖu bÞ mÊt.\n"
-"\n"
-"   TÝnh n¨ng nµy rÊt thuËn tiÖn khi thùc hiÖn cµi ®Æt trªn mét sè l­îng lín "
-"c¸c m¸y gièng nhau.\n"
-"H·y xem phÇn Auto install trªn WebSite cña chóng t«i.\n"
-"\n"
-" * L­u l¹i lùa chän c¸c gãi(*): L­u l¹i lùa chän c¸c gãi ®· ®­îc t¹o ra "
-"tr­íc ®ã.\n"
-"Sau ®ã, khi thùc hiÖn mét sù cµi ®Æt kh¸c, n¹p ®Üa mÒm vµo æ ®Üa vµ ch¹y "
-"qu¸\n"
-"tr×nh cµi ®Æt theo trî gióp trªn mµn h×nh (nhÊn F1), vµ gâ >>linux defcfg="
-"\"floppy\"<<.\n"
-"\n"
-"(*) B¹n cÇn cã mét ®Üa mÒm ®Þnh d¹ng theo FAT (trong GNU/Linux, gâ\n"
-"\"mformat a:\")"
-
-#: ../../help.pm_.c:350
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"BÊt kú ph©n vïng nµo míi ®­îc ho¹ch ®Þnh ph¶i ®­îc format ®Ó dïng\n"
-"(viÖc format nghÜa lµ t¹o nªn mét hÖ thèng tËp tin).\n"
-"\n"
-"B©y giê, cã lÏ b¹n muèn format l¹i mét sè ph©n vïng hiÖn cã ®Ó xãa\n"
-"d÷ liÖu cã trªn ®ã. NÕu muèn thùc hiÖn, h·y chän c¸c ph©n vïng\n"
-"®Ó tiÕn hµnh format.\n"
-"\n"
-"L­u ý lµ kh«ng cÇn thiÕt ph¶i format l¹i c¸c ph©n vïng cã s½n tõ tr­íc.\n"
-"B¹n ph¶i format l¹i c¸c ph©n vïng chøa hÖ ®iÒu hµnh (nh­ lµ \"/\",\n"
-"\"/usr\" hoÆc \"/var\") nh­ng b¹n kh«ng ph¶i format l¹i c¸c ph©n vïng chøa\n"
-"d÷ liÖu mµ b¹n muèn gi÷ l¹i (®iÓn h×nh lµ /home).\n"
-"\n"
-"H·y thËn träng khi chän c¸c ph©n vïng, sau khi format, mäi d÷ liÖu cã trªn\n"
-"c¸c ph©n vïng ®­îc chän sÏ bÞ xãa vµ b¹n sÏ kh«ng cã c¸ch nµo phôc håi ®­îc\n"
-"chóng.\n"
-"\n"
-"NhÊp chuét lªn OK khi b¹n ®· s½n sµng thùc hiÖn format c¸c ph©n vïng.\n"
-"\n"
-"NhÊp chuét lªn Bá qua nÕu b¹n muèn chän c¸c ph©n vïng kh¸c ®Ó cµi ®Æt\n"
-"hÖ ®iÒu hµnh Mandrake Linux.\n"
-"\n"
-"NhÊp chuét lªn N©ng cao ®Ó chän c¸c ph©n vïng mµ b¹n muèn kiÓm tra lçi\n"
-"bÒ mÆt ®Üa."
-
-#: ../../help.pm_.c:376
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"HÖ ®iÒu hµnh Mandrake Linux hiÖn ®ang ®­îc cµi ®Æt.\n"
-"Qu¸ tr×nh nµy diÔn ra trong Ýt phót (thêi gian cµi ®Æt phô thuéc vµo kÝch "
-"th­íc\n"
-"mµ b¹n chän cµi ®Æt vµ tèc ®é cña m¸y).\n"
-"\n"
-"\n"
-"Xin h·y kiªn nhÉn."
-
-#: ../../help.pm_.c:384
-#, fuzzy
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"Tr­íc khi tiÕp tôc, h·y ®äc kü c¸c ®iÒu kho¶n ®­îc ghi trong b¶n quyÒn. Nã\n"
-"bao trïm lªn toµn bé ph©n phèi Mandrake Linux, nÕu b¹n kh«ng ®ång ý mäi\n"
-"®iÒu kho¶n trong ®ã, nhÊn vµo nót Tõ chèi. Ngay lËp tøc viÖc cµi ®Æt sÏ "
-"chÊm\n"
-"døt. §Ó tiÕp tôc qu¸ tr×nh cµi ®Æt, nhÊn vµo nót ChÊp thuËn."
-
-#: ../../help.pm_.c:391
-#, fuzzy
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Vµo lóc nµy, b¹n cã thÓ chän møc ®é b¶o mËt phï hîp víi nhu cÇu cho\n"
-"m¸y tÝnh. Víi mét nguyªn t¾c chñ ®¹o: m¸y cµng bÞ ph¬i bµy bao nhiªu vµ l­u\n"
-"tr÷ nhiÒu d÷ liÖu bao nhiªu  th× møc ®é b¶o mËt cµng ph¶i cao bÊy nhiªu. Tuy "
-"nhiªn,\n"
-"møc ®é b¶o mËt cµng cao bao nhiªu th× th­êng lµm gi¶m tÝnh dÔ sö dông bÊy "
-"nhiªu.\n"
-"H·y tham kh¶o ch­¬ng MSEC trong Reference Manual ®Ó biÕt thªm th«ng tin vÒ\n"
-"ý nghÜa cña c¸c møc b¶o mËt.\n"
-"\n"
-"NÕu b¹n kh«ng biÕt ph¶i chän møc ®é nµo, h·y gi÷ tïy chän mÆc ®Þnh."
-
-#: ../../help.pm_.c:401
-#, fuzzy
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Lóc nµy, b¹n cÇn chän ph©n vïng\n"
-"nµo dïng cho viÖc cµi ®Æt hÖ thèng Mandrake Linux míi. NÕu c¸c ph©n vïng\n"
-"®· ®­îc ho¹ch ®Þnh (ë lÇn cµi ®Æt GNU/Linux tr­íc hay b»ng\n"
-"tiÖn Ých ph©n vïng kh¸c), b¹n cã thÓ dïng c¸c ph©n vïng s½n cã nµy. Trong "
-"c¸c tr­êng hîp kh¸c,\n"
-"c¸c ph©n vïng trªn ®Üa cøng ph¶i ®­îc ho¹ch ®Þnh.\n"
-"\n"
-"\n"
-"§Ó t¹o ph©n vïng, ®Çu tiªn lµ b¹n ph¶i chän mét æ ®Üa. B¹n chän  æ\n"
-"®Üa ®Ó ph©n vïng b»ng c¸ch nhÊp chuét lªn \"hda\" ®èi víi æ IDE ®Çu tiªn, "
-"\"hdb\" ®èi víi\n"
-"æ thø hai hoÆc \"sda\" ®èi víi æ SCSI ®Çu tiªn vµ cø tiÕp tôc nh­ vËy.\n"
-"\n"
-"\n"
-"§Ó ph©n vïng æ ®Üa ®­îc chän, b¹n cã thÓ dïng c¸c tïy chän:\n"
-"\n"
-"   * Xãa tÊt c¶: Tïy chän nµy sÏ xãa mäi ph©n vïng hiÖn cã trªn æ ®Üa ®­îc "
-"chän.\n"
-"\n"
-"\n"
-"   * Tù ®éng ph©n chia: tïy chän nµy tù ®éng t¹o c¸c ph©n vïng Ext2 vµ ph©n "
-"vïng swap t¹i kh«ng gian trèng trªn æ ®Üa\n"
-"     cña b¹n.\n"
-"\n"
-"\n"
-"   * Cøu b¶ng ph©n vïng: nÕu b¶ng ph©n vïng bÞ háng, b¹n cã thÓ thö kh«i "
-"phôc nã b»ng tïy chän nµy. H·y\n"
-"     thËn träng vµ nªn nhí lµ nã cã thÓ kh«ng thµnh c«ng.\n"
-"\n"
-"\n"
-"   * Kh«ng thùc hiÖn: b¹n dïng tïy chän nµy ®Ó bá qua c¸c thay ®æi ®· thiÕt "
-"lËp.\n"
-"\n"
-"\n"
-"   * N¹p l¹i: b¹n dïng tïy chän nµy nÕu muèn hoµn l¹i mäi thay ®æi vµ n¹p "
-"l¹i b¶ng ph©n vïng ban ®Çu\n"
-"\n"
-"\n"
-"   * §å thuËt: ®å thuËt nµy dïng ®Ó ph©n vïng æ cøng, b¹n cã thÓ sö dông tïy "
-"chän nµy. Chóng t«i khuyÕn c¸o b¹n nªn dïng nã\n"
-"     nÕu b¹n kh«ng cã hiÓu biÕt vÒ viÖc ph©n vïng.\n"
-"\n"
-"\n"
-"   * Kh«i phôc tõ ®Üa mÒm: nÕu b¹n l­u b¶ng ph©n vïng vµo ®Üa mÒm ë lÇn cµi "
-"®Æt tr­íc, b¹n cã thÓ \n"
-"     kh«i phôc l¹i nã b»ng tïy chän nµy.\n"
-"\n"
-"\n"
-"   * L­u lªn ®Üa mÒm: nÕu b¹n muèn l­u b¶ng ph©n vïng lªn ®Üa mÒm ®Ó cã thÓ "
-"kh«i phôc sau nµy, b¹n dïng tïy chän\n"
-"     nµy. Tïy chän nµy rÊt nªn thùc hiÖn\n"
-"\n"
-"\n"
-"   * Hoµn thµnh: khi b¹n kÕt thóc viÖc ph©n vïng æ ®Üa, h·y dïng tïy chän "
-"nµy ®Ó l­u c¸c thay ®æi.\n"
-"\n"
-"\n"
-"VÒ th«ng tin, b¹n cã thÓ chuyÓn tíi lùa chän nµo ®ã b»ng bµn phÝm: ®Ó chuyÓn "
-"qua l¹i gi÷a c¸c ph©n vïng, dïng phÝm Tab vµ phÝm mòi tªn Lªn/Xuèng.\n"
-"\n"
-"\n"
-"Khi ®· chän mét ph©n vïng, b¹n cã thÓ dïng:\n"
-"\n"
-"           * Ctrl-c ®Ó t¹o ph©n vïng míi (khi mét ph©n vïng trèng ®­îc "
-"chän)\n"
-"\n"
-"           * Ctrl-d ®Ó xãa mét ph©n vïng\n"
-"\n"
-"           * Ctrl-m ®Ó thiÕt lËp ®iÓm g¾n kÕt\n"
-"           \n"
-"\n"
-"           \n"
-"NÕu b¹n cµi ®Æt trªn m¸y PPC, b¹n sÏ cÇn t¹o mét ph©n vïng nhá HFS bÉy khëi "
-"®éng Ýt nhÊt lµ 1MB cho tr×nh khëi ®éng yaboot \n"
-"sö dông. NÕu b¹n chän kÝch th­íc ph©n vïng cao h¬n mét chót, 50MB, b¹n cã "
-"thÓ cã mét kh«ng gian h÷u Ých ®Ó l­u gi÷ \n"
-"mét kernel dù phßng vµ ¶nh ramdisk cho tr­êng hîp khëi ®éng khÈn cÊp."
-
-#: ../../help.pm_.c:460
-#, fuzzy
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Cã h¬n mét ph©n vïng cña Microsoft Windows ®­îc ph¸t\n"
-"hiÖn trªn æ cøng cña b¹n. H·y chän ph©n vïng mµ b¹n muèn thiÕt lËp l¹i\n"
-"kÝch th­íc ®Ó cµi ®Æt hÖ thèng Mandrake Linux .\n"
-"\n"
-"\n"
-"VÒ th«ng tin, mçi ph©n vïng ®­îc ghi nh­ sau; \"Tªn Linux\", \"Tªn\n"
-"Windows\", \"Dung l­îng\".\n"
-"\n"
-"\"Tªn Linux\" cã m· nh­ sau: \"kiÓu æ cøng\", \"sè æ cøng\",\n"
-"\"sè ph©n vïng\" (vÝ dô, \"hda1\").\n"
-"\n"
-"\n"
-"\"KiÓu æ cøng\" lµ \"hd\" nÕu æ ®Üa cøng thuéc lo¹i IDE vµ \"sd\"\n"
-"nÕu lµ æ ®Üa SCSI .\n"
-"\n"
-"\n"
-"\"Sè æ cøng\" lu«n lµ ch÷ c¸i ®øng sau \"hd\" hay \"sd\". §èi víi æ cøng "
-"IDE :\n"
-"\n"
-"   * \"a\" lµ \"æ ®Üa chÝnh nèi víi ®iÒu khiÓn IDE ®Çu tiªn\",\n"
-"\n"
-"   * \"b\" lµ \"æ ®Üa phô nèi víi ®iÒu khiÓn IDE ®Çu tiªn\",\n"
-"\n"
-"   * \"c\" lµ \"æ ®Üa chÝnh nèi víi ®iÒu khiÓn IDE thø hai\",\n"
-"\n"
-"   * \"d\" lµ \"æ ®Üa phô nèi víi ®iÒu khiÓn IDE thø hai\".\n"
-"\n"
-"§èi víi æ cøng SCSI , a \"a\" lµ \"æ ®Üa ®Çu tiªn\", a \"b\" lµ \"æ ®Üa thø "
-"hai\", v.v...\n"
-"\n"
-"\n"
-"\"Tªn Windows\" lµ ch÷ c¸i cña æ ®Üa do Windows ®Æt tªn (æ ®Üa ®Çu tiªn\n"
-"hoÆc ph©n vïng ®Çu tiªn lµ \"C:\")."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "H·y kiªn nhÉn. Qu¸ tr×nh nµy thùc hiÖn mÊt vµi phót"
-
-#: ../../help.pm_.c:494
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"B©y giê, drakX hái xem b¹n muèn tiÕn hµnh kiÓu cµi ®Æt nµo. T¹i ®©y, b¹n "
-"còng sÏ\n"
-"chän viÖc thùc hiÖn cµi ®Æt hay lµ tiÕn hµnh n©ng cÊp cho hÖ thèng\n"
-"Mandrake Linux hiÖn cã. H·y chän sao cho thÝch hîp víi hoµn c¶nh. Cã thÓ "
-"thùc\n"
-"hiÖn cµi ®Æt ®Ì lªn hÖ thèng hiÖn cã, xãa bá hÖ thèng cò. Còng cã thÓ thùc "
-"hiÖn\n"
-"viÖc n©ng cÊp ®Ó söa ch÷a hÖ thèng hiÖn cã.\n"
-"\n"
-"H·y chän \"Cµi ®Æt\" nÕu kh«ng cã mét phiªn b¶n tr­íc ®ã cña Mandrake Linux\n"
-"®­îc cµi ®Æt hoÆc nÕu b¹n muèn sö dông vµi hÖ ®iÒu hµnh.\n"
-"\n"
-"H·y chän \"CËp nhËt\" nÕu b¹n muèn cËp nhËt cho phiªn b¶n ®· ®­îc cµi ®Æt "
-"cña\n"
-"Mandrake Linux.\n"
-"\n"
-"Tïy thuéc vµo sù hiÓu biÕt vÒ GNU/Linux, b¹n cã thÓ chän mét trong c¸c\n"
-"møc ®é cµi ®Æt hoÆc cËp nhËt hÖ ®iÒu hµnh Mandrake Linux sau ®©y:\n"
-"\n"
-" * Gîi ý: nÕu b¹n ch­a bao giê cµi ®Æt mét hÖ ®iÒu hµnh GNU/Linux th× nªn\n"
-"chän Gîi ý. ViÖc cµi ®Æt sÏ rÊt ®¬n gi¶n vµ b¹n chØ ph¶i tr¶ lêi rÊt Ýt c¸c\n"
-"c©u hái.\n"
-"\n"
-" * Tïy chØnh: nÕu b¹n ®· quen thuéc víi GNU/Linux, b¹n cã thÓ chän kiÓu\n"
-"sö dông chÝnh (tr¹m lµm viÖc, m¸y chñ, ph¸t triÓn) cho hÖ thèng. B¹n sÏ "
-"ph¶i\n"
-"tr¶ lêi nhiÒu c©u hái h¬n kiÓu cµi ®Æt \"Gîi ý\", do ®ã b¹n\n"
-"cÇn biÕt GNU/Linux lµm viÖc ra sao khi chän kiÓu cµi ®Æt nµy.\n"
-"\n"
-" * Chuyªn gia: nÕu cã kiÕn thøc tèt vÒ GNU/Linux, b¹n cã thÓ chän\n"
-"kiÓu cµi ®Æt nµy. Nh­ trong kiÓu cµi ®Æt \"Tïy chØnh\" , b¹n sÏ cã thÓ chän "
-"kiÓu\n"
-"sö dông chÝnh (tr¹m lµm viÖc, m¸y chñ, ph¸t triÓn). H·y thËn träng\n"
-"tr­íc khi chän kiÓu cµi ®Æt nµy. B¹n sÏ cã kh¶ n¨ng thùc hiÖn mét qu¸ tr×nh "
-"cµi\n"
-"®Æt cã tÝnh tïy chØnh cao. B¹n sÏ gÆp khã kh¨n khi tr¶ lêi mét sè c©u hái "
-"nÕu b¹n\n"
-"kh«ng n¾m v÷ng vÒ GNU/Linux. Do ®ã, ®õng chän kiÓu cµi ®Æt nµy trõ\n"
-"khi b¹n n¾m râ viÖc ®ang lµm."
-
-#: ../../help.pm_.c:521
-#, fuzzy
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Th«ng th­êng, drakX sÏ chän bµn phÝm thÝch hîp cho b¹n (phô thuéc vµo ng«n\n"
-"ng÷ b¹n ®· chän) vµ thËm chÝ b¹n sÏ kh«ng thÊy b­íc nµy. Dï sao, còng cã "
-"kh¶\n"
-"n¨ng lµ b¹n kh«ng cã bµn phÝm t­¬ng øng chÝnh x¸c víi ng«n ng÷: vÝ dô, nÕu\n"
-"b¹n lµ ng­êi Anh nãi tiÕng Thôy sÜ, b¹n vÉn muèn gi÷ bµn phÝm cña m×nh lµ "
-"bµn\n"
-"phÝm Thôy sÜ. Hay b¹n nãi tiÕng Anh nh­ng l¹i ®ang ë Quebec, b¹n cã thÓ "
-"liªn\n"
-"hÖ b¶n th©n theo t×nh huèng t­¬ng tù. Trong c¶ hai tr­êng hîp, b¹n sÏ ph¶i\n"
-"quay l¹i b­íc cµi ®Æt nµy vµ chän mét bµn phÝm thÝch hîp trong danh s¸ch.\n"
-"\n"
-"Mäi viÖc cÇn lµm lµ chän tæ chøc bµn phÝm ­a thÝch cña m×nh trong danh s¸ch\n"
-"xuÊt hiÖn tr­íc mÆt.\n"
-"\n"
-"NÕu cã mét bµn phÝm cho ng«n ng÷ kh¸c víi bµn phÝm dïng mÆc ®Þnh, h·y\n"
-"nhÊn nót N©ng cao, b¹n sÏ thÊy mét danh s¸ch ®Çy ®ñ c¸c bµn phÝm ®­îc\n"
-"hç trî."
-
-#: ../../help.pm_.c:534
-#, fuzzy
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-"H·y chän ng«n ng÷ ­a thÝch ®Ó thùc hiÖn cµi ®Æt vµ dïng trong hÖ thèng.\n"
-"\n"
-"Nót N©ng cao sÏ cho phÐp b¹n lùa chän c¸c ng«n ng÷ kh¸c , vµ chóng sÏ ®­îc\n"
-"cµi ®Æt lªn m¸y tÝnh ®Ó b¹n cã thÓ sö dông chóng sau nµy khi cÇn ®Õn. LÊy "
-"vÝ\n"
-"dô: b¹n cã mét ng­êi tõ T©y ban nha ®Õn vµ dïng m¸y tÝnh cña b¹n, chän "
-"tiÕng\n"
-"Anh lµ ng«n ng÷ chÝnh trong danh s¸ch, vµ trong phÇn N©ng cao, ®¸nh dÊu vµo\n"
-"hép t­¬ng øng víi Spanish|Spain.\n"
-"\n"
-"Ngay khi b¹n ®· chän xong ng«n ng÷ vµ kh¼ng ®Þnh b»ng viÖc nhÊn vµo nót\n"
-"OK,  ch­¬ng tr×nh sÏ tù ®éng thùc hiÖn b­íc tiÕp theo."
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"H·y chän ®óng cæng. VÝ dô, cæng COM1\n"
-"ë MS Windows cã tªn lµ ttyS0 trong GNU/Linux."
-
-#: ../../help.pm_.c:564
-#, fuzzy
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"§©y lµ thêi ®iÓm chñ chèt nhÊt ®èi víi vÊn ®Ò b¶o mËt cho hÖ thèng Linux:\n"
-"b¹n sÏ ph¶i nhËp mét mËt khÈu cho Root. Root lµ ng­êi qu¶n trÞ hÖ thèng vµ\n"
-"lµ ng­êi duy nhÊt ®­îc phÐp tiÕn hµnh cËp nhËt, thªm ng­êi dïng, thay ®æi "
-"toµn\n"
-"bé cÊu h×nh hÖ thèng, vµ v.v... Nãi ng¾n gän lµ root cã thÓ thùc hiÖn ®­îc "
-"mäi thø!\n"
-"§ã lµ lý do t¹i sao b¹n cÇn chän mét mËt khÈu ph¶i thËt khã ®o¸n; drakX\n"
-"sÏ th«ng b¸o khi nã qu¸ dÔ ®o¸n. Nh­ ®· thÊy, b¹n cã thÓ kh«ng nhËp\n"
-"mËt khÈu, nh­ng chóng t«i khuyªn b¹n rÊt nªn nhËp mËt khÈu, v× mét lý do:\n"
-"®õng cho r»ng chØ mét m×nh b¹n khëi ®éng Linux, c¸c hÖ ®iÒu hµnh kh¸c vÉn\n"
-"an toµn khi gÆp lçi. §iÒu ®ã kh«ng ®óng v× Root cã thÓ v­ît qua mäi giíi "
-"h¹n\n"
-"vµ v« ý xãa toµn bé d÷ liÖu trªn c¸c ph©n vïng do tù chóng truy cËp thiÕu\n"
-"thËn träng !\n"
-"\n"
-"MËt khÈu nªn pha trén b»ng c¸c ký tù sè vµ ch÷ c¸i vµ cã ®é dµi Ýt nhÊt\n"
-"lµ 8 ký tù. Vµ kh«ng nªn ghi nã vµo ®©u c¶.\n"
-"\n"
-"§õng nªn dïng mËt khÈu qu¸ dµi hoÆc phøc t¹p ®Ó cho phÐp b¹n cã kh¶ n¨ng\n"
-"nhí nã mét c¸ch kh«ng khã kh¨n l¾m.\n"
-"\n"
-"B¹n sÏ ph¶i nhËp mËt khÈu hai lÇn, mét lçi khi gâ mËt khÈu trong lÇn ®Çu "
-"tiªn\n"
-"cã thÓ trë thµnh mét vÊn ®Ò khi b¹n nhËp l¹i v× mËt khÈu ``kh«ng chÝnh "
-"x¸c''\n"
-"nµy sÏ ®­îc ®ßi hái khi b¹n thùc hiÖn kÕt nèi vµo hÖ thèng.\n"
-"\n"
-"Tïy thuéc vµo cÊu h×nh m¹ng côc bé, cã thÓ b¹n dïng hay kh«ng dïng NIS. NÕu\n"
-"kh«ng biÕt râ, h·y hái ng­êi qu¶n trÞ hÖ thèng. NÕu sö dông NIS, h·y ®¸nh "
-"dÊu\n"
-"vµo tïy chän Dïng NIS. Sau khi nhÊn OK, b¹n sÏ ph¶i ®iÒn c¸c th«ng tin cÇn\n"
-"thiÕt vµo."
-
-#: ../../help.pm_.c:600
-#, fuzzy
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-"LILO vµ GRUB ®Òu lµ tr×nh n¹p khëi ®éng cho Linux. Th«ng th­êng, giai ®o¹n "
-"nµy\n"
-"®­îc tù ®éng hoµn toµn. Thùc tÕ, drakX sÏ ph©n tÝch sector khëi ®éng cña "
-"®Üa\n"
-"vµ thùc hiÖn sao cho phï hîp víi nh÷ng g× nã t×m thÊy ë ®©y:\n"
-"\n"
-" * nÕu t×m thÊy sector khëi ®éng cña Windows, nã sÏ thay thÕ b»ng sector "
-"khëi ®éng\n"
-"GRUB/LILO ®Ó cho b¹n cã thÓ khëi ch¹y GNU/Linux hoÆc Windows;\n"
-"\n"
-" * nÕu t×m thÊy sector khëi ®éng GRUB hay LILO, nã sÏ thay thÕ mét c¸i míi;\n"
-"\n"
-"nÕu nghi ngê, drakX sÏ hiÓn thÞ mét hép tho¹i víi c¸c tïy chän kh¸c nhau.\n"
-"\n"
-" * Tr×nh n¹p khëi ®éng sÏ ®­îc dïng: cã ba lùa chän cho b¹n:\n"
-"\n"
-"    * LILO víi menu ®å häa: khi b¹n thÝch dïng LILO víi giao diÖn ®å häa.\n"
-"\n"
-"    * Grub: nÕu b¹n thÝch dïng GRUB (víi menu v¨n b¶n).\n"
-"\n"
-"    * LILO víi menu v¨n b¶n: nÕu b¹n thÝch dïng LILO víi menu v¨n b¶n.\n"
-"\n"
-" * ThiÕt bÞ khëi ®éng: th­êng th× b¹n sÏ kh«ng thay ®æi mÆc ®Þnh (/dev/hda), "
-"nh­ng nÕu\n"
-"b¹n muèn, tr×nh n¹p khëi ®éng cã thÓ ®­îc ghi lªn æ ®Üa cøng thø hai (/dev/"
-"hdb),\n"
-"hay thËm chÝ lµ mét ®Üa mÒm (/dev/fd0).\n"
-"\n"
-" * Tr× ho·n tr­íc khi n¹p ¶nh mÆc ®Þnh: khi khëi ®éng l¹i, ®©y lµ thêigian\n"
-"trÔ cho phÐp ®Ó ng­êi dïng cã thÓ chän trªn menu cña tr×nh n¹p khëi ®éng mét "
-"môc\n"
-"nhËp khëi ®éng kh¸c víi mÆc ®Þnh.\n"
-"\n"
-"!! Chó ý: nÕu b¹n chän kh«ng cµi ®Æt tr×nh n¹p khëi ®éng (b»ng c¸ch chän Bá "
-"qua),\n"
-"b¹n ph¶i ®¶m b¶o lµ b¹n ®· cã mét c¸ch kh¸c ®Ó khëi ®éng hÖ thèng Linux "
-"Mandrake!\n"
-"Còng nªn biÕt ch¾c vÒ viÖc ®ang lµm khi b¹n thay ®æi bÊt kú mét tïy chän nµo "
-"ë ®©y. !!\n"
-"\n"
-"NhÊn vµo nót N©ng cao trong hép tho¹i nµy sÏ cã thªm nhiÒu tïy chän n©ng "
-"cao\n"
-"®Ó ®¸p øng cho ng­êi dïng thµnh th¹o.\n"
-"\n"
-"Mandrake Linux cµi ®Æt tr×nh n¹p khëi ®éng cña nã, cho phÐp khëi ®éng\n"
-"GNU/Linux hay bÊt kú hÖ ®iÒu hµnh kh¸c cã trªn hÖ thèng cña b¹n.\n"
-"\n"
-"NÕu nh­ cã mét hÖ ®iÒu hµnh kh¸c ®· ®­îc cµi ®Æt trªn m¸y, nã sÏ tù ®éng\n"
-"®­îc bæ xung vµo menu khëi ®éng. T¹i ®©y, b¹n cã thÓ chän ®óng c¸c tïy\n"
-"chän hiÖn cã. NhÊn ®óp lªn mét môc hiÖn cã sÏ cho phÐp b¹n thay ®æi c¸c "
-"th«ng\n"
-"sè cña nã hay xãa bá, NhÊn Thªm ®Ó t¹o môc nhËp míi; nhÊn Hoµn thµnh ®Ó\n"
-"tiÕp tôc c¸c b­íc cµi ®Æt."
-
-#: ../../help.pm_.c:647
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) vµ Grub lµ c¸c tr×nh qu¶n lý khëi ®éng kh«ng chØ\n"
-"cho GNU/Linux mµ cßn cho c¶ c¸c hÖ ®iÒu hµnh kh¸c trong m¸y tÝnh cña b¹n.\n"
-"Th«ng th­êng, c¸c hÖ ®iÒu hµnh kh¸c ®­îc ph¸t hiÖn chÝnh x¸c vµ ®­îc cµi\n"
-"®Æt. NÕu kh«ng ®­îc nh­ vËy, b¹n cã thÓ nhËp thªm b»ng tay vµo mµn h×nh \n"
-"nµy. H·y thËn träng chän chÝnh x¸c c¸c th«ng sè.\n"
-"\n"
-"\n"
-"B¹n còng cã thÓ kh«ng muèn cho ng­êi kh¸c truy cËp vµo c¸c hÖ ®iÒu hµnh\n"
-"kh¸c nµy, tr­êng hîp nµy b¹n cã thÓ xo¸ c¸c môc nhËp t­¬ng øng. Muèn vËy,\n"
-"b¹n ph¶i t¹o mét ®Üa khëi ®éng ®Ó khëi ®éng chóng!"
-
-#: ../../help.pm_.c:658
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"B¹n cÇn ph¶i chØ ra n¬i b¹n muèn ®Æt th«ng\n"
-"tin cÇn thiÕt ®Ó khëi ®éng vµo GNU/Linux.\n"
-"\n"
-"\n"
-"NÕu b¹n biÕt chÝnh x¸c mäi viÖc, h·y chän \"Sector ®Çu\n"
-"tiªn cña ®Üa (MBR)\"."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-#, fuzzy
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"Sau ®©y, drakX tiÕn hµnh ph¸t hiÖn toµn bé phÇn cøng cã trong m¸y. Nã còng\n"
-"sÏ rµ quÐt c¸c card PCI SCSI cã trªn hÖ thèng nÕu nh­ cã. NÕu\n"
-"t×m thÊy thiÕt bÞ nh­ vËy, drakX sÏ tù ®éng cµi ®Æt driver phï hîp.\n"
-"\n"
-"Gi¶ sö kh«ng thµnh c«ng, b¹n sÏ ®­îc hái xem hÖ thèng cã card SCSI hay "
-"kh«ng. H·y\n"
-"tr¶ lêi lµ Cã ®Ó chän card trong danh s¸ch hoÆc Kh«ng nÕu b¹n kh«ng cã phÇn "
-"cøng SCSI.\n"
-"NÕu kh«ng râ, b¹n còng cã thÓ kiÓm tra danh s¸ch phÇn cøng trong m¸y b»ng "
-"viÖc chän\n"
-"Xem th«ng tin phÇn cøng vµ nhÊn chuét lªn OK.\n"
-"\n"
-"NÕu nh­ b¹n ph¶i tù ®Þnh ra adapter, DrakX sÏ hái lµ b¹n cã muèn ®Þnh\n"
-"ra c¸c tïy chän cho nã. B¹n nªn cho phÐp DrakX th¨m dß phÇn cøng ®Ó ®­a\n"
-"ra c¸c tïy chän. §iÒu nµy th­êng diÔn ra mét c¸ch tr«i ch¶y.\n"
-"\n"
-"NÕu kh«ng, b¹n cÇn ph¶i cung cÊp c¸c tïy chän cho driver. H·y xem l¹i The\n"
-"User Guide (ch­¬ng 3, phÇn \"Collective informations on your hardware\") ®Ó\n"
-"cã gîi ý vÒ th«ng tin phÇn cøng nµy tõ tµi liÖu vÒ phÇn cøng, tõ Web site\n"
-"cña nhµ s¶n xuÊt (nÕu b¹n cã ®­êng truy cËp Internet) hoÆc tõ Microsoft "
-"Windows\n"
-"(nÕu cã trªn hÖ thèng cña b¹n)."
-
-#: ../../help.pm_.c:720
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"B¹n cã thÓ nhËp thªm vµo yaboot, kh«ng chØ cho c¸c hÖ ®iÒu hµnh kh¸c,\n"
-"c¸c kernel lu©n phiªn, mµ cßn cho ¶nh khëi ®éng cÊp cøu.\n"
-"\n"
-"\n"
-"Cho c¸c hÖ ®iÒu hµnh kh¸c - môc nhËp chØ gåm nh·n vµ ph©n vïng root.\n"
-"\n"
-"\n"
-"§èi víi Linux, cã mét Ýt tïy chän cã thÓ thùc hiÖn: \n"
-"\n"
-"\n"
-"  - Nh·n: chØ ®¬n gi¶n lµ tªn sÏ ®­îc gâ t¹i dÊu nh¾c yaboot ®Ó lùa tïy chän "
-"khëi \n"
-"®éng nµy.\n"
-"\n"
-"\n"
-"  - ¶nh: lµ tªn cña kernel khëi ®éng.  §iÓn h×nh lµ vmlinux hoÆc\n"
-"sù biÕn ®æi cña vmlinux víi phÇn më réng.\n"
-"\n"
-"\n"
-"  - Root: thiÕt bÞ root hay '/' ®Ó cho cµi ®Æt Linux.\n"
-"\n"
-"\n"
-"  \n"
-"  - Bæ sung: trªn phÇn cøng cñaApple, tïy chän bæ sung kernel rÊt hay ®­îc "
-"dïng®Ó\n"
-"hç trî cho gi¸ trÞ ban ®Çu cña phÇn cøng video, hoÆc ®Ó m« pháng bµn phÝm vµ "
-"chuét\n"
-"cho c¸c chuét cña Apple kh«ng cã nót thø hai vµ ba.  Sau ®©y \n"
-"lµ mét sè vÝ dô:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: tïy chän nµy dïng ®Ó n¹p c¸c module ®Çu tiªn, tr­íc khi thiÕt "
-"bÞ \n"
-"khëi ®éng s½n sµng, hay ®Ó n¹p ¶nh ramdisk cho tr­êng hîp khëi ®éng cÊp "
-"cøu.\n"
-"\n"
-"\n"
-"  - Initrd-size: kÝch th­íc mÆc ®Þnh cña ramdisk lµ 4096 bytes. NÕu b¹n cÇn "
-"t¹o\n"
-"mét ramdisk lín th× cã thÓ sö dông tïy chän nµy.\n"
-"\n"
-"\n"
-"  - §äc-Ghi: th«ng th­êng ph©n vïng 'root' ®Çu tiªn mang thuéc tÝnh chØ ®äc, "
-"®Ó cho phÐp\n"
-"mét hÖ thèng tËp tin kiÓm tra tr­íc khi hÖ thèng trë nªn ho¹t ®éng'. B¹n cã "
-"thÓ ghi ®Ì lªn tïy chän ë ®©y.\n"
-"\n"
-"\n"
-"  - Kh«ng cã Video: chøng tá phÇn cøng video cña Apple cã vÊn ®Ò bÊt th­êng, "
-"b¹n cã thÓ \n"
-"lùa tïy chän nµy ®Ó khëi ®éng vµo chÕ ®é 'kh«ng cã video', cã hç trî cña cÊu "
-"tróc ®Öm t¹i chç.\n"
-"\n"
-"\n"
-"  - MÆc ®Þnh: chän môc nhËp nµy lµ tïy chän mÆc ®Þnh cña Linux, chØ viÖc\n"
-"nhÊn phÝm ENTER t¹i dÊu nh¾c yaboot.  Môc chän nµy còng sÏ bËt s¸ng víi dÊu "
-"'*', khi b¹n\n"
-"nhÊn phÝm TAB ®Ó xem c¸c lùa chän khëi ®éng."
-
-#: ../../help.pm_.c:765
-#, fuzzy
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot lµ tr×nh khëi ®éng cho m¸y MacIntosh . Nã cã thÓ\n"
-"boot ®­îc c¶ GNU/Linux, MacOS, hay MacOSX, nÕu Yaboot cã mÆt trong m¸y tÝnh "
-"cña b¹n.\n"
-"Th«ng th­êng,cã c¸c hÖ ®iÒu hµnh kh¸c ®­îc ph¸t hiÖn chÝnh x¸c vµ\n"
-"®­îc cµi ®Æt.Trong tr­êng hîp kh«ng ®­îc ph¸t hiªn,b¹n cã thÓ tù m×nh thªm "
-"vµo b»ng tay nh­\n"
-"trong mµn h×nh nµy.Xin cÈn thËn khi chän kh¸c tham sè.\n"
-"\n"
-"\n"
-"C¸c tuú chän chÝnh cñaYaboot lµ :\n"
-"\n"
-"\n"
-"  -Th«ng ®iÖp s¬ khëi :Mét th«ng ®iÖp ®¬n gi¶n ®­îc hiÓn thÞ tr­íc khi\n"
-"boot prompt .\n"
-"\n"
-"\n"
-"  - ThiÕt bÞ boot: ChØ n¬i mµ b¹n ®Æt c¸c th«ng tin ®­îc yªu cÇu ®Ó\n"
-"boot tíi  GNU/Linux. Nãi chung, b¹n sÏ cµi ®Æt mét ph©n vïng bootstraptr­íc "
-"®ã \n"
-"®Ó gi÷ c¸c th«ng tin nµy.\n"
-"\n"
-"\n"
-"  - Më firmware delay: Kh¸c víi LILO, cã hai delays dïng ®­îc trong \n"
-"yaboot.  Delay thö nhÊt ®­îc ®o b»ng gi©y vµ trong ®iÓm nµy b¹n cã thÓ \n"
-"chän gi÷a CD, OF boot, MacOS, hay Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: Thêi gian timeout nµy t­¬ng tù víi  LILO boot "
-"delay.  Sau khi \n"
-"chän Linux, b¹n sÏ ®­îc lµm trÔ 0.1 gi©y sau khi nh©n\n"
-"mÆc ®Þnh cña b¹n ®­îc chän.\n"
-"\n"
-"\n"
-"  - Cho phÐp CD Boot?: Chän tuú chän nµy sÏ cho phÐp b¹n chän  'C' cho CD\n"
-"vµo lÇn boot ®Çu tiªn.\n"
-"\n"
-"\n"
-"  - Cho phÐp OF Boot?: Chän tuú chän nµy sÏ cho phÐp b¹n chän 'N' ®Ó më\n"
-"Firmware vµo lÇn boot ®Çu tiªn.\n"
-"\n"
-"\n"
-"  - OS mÆc ®Þnh: B¹n cã thÓ chän OS nµo sÏ ®­îc boot theo mÆc ®Þnh khi më "
-"Firmware \n"
-"Thêi gian tr× ho·n kÕt thóc."
-
-#: ../../help.pm_.c:798
-#, fuzzy
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-"T¹i ®©y hiÓn thÞ  nhiÒu lo¹i th«ng sè liªn quan tíi m¸y tÝnh. Tïy thuéc vµo\n"
-"phÇn cøng ®­îc cµi ®Æt mµ b¹n cã thÓ nh×n thÊy c¸c  môc nhËp nh­ sau:\n"
-"\n"
-" * Chuét: kiÓm tra cÊu h×nh chuét hiÖn thêi vµ nhÊn vµo nót ®Ó thay ®æi nÕu\n"
-"thÊy cÇn thiÕt.\n"
-"\n"
-" * Bµn phÝm: kiÓm tra cÊu h×nh keyboard map hiÖn thêi vµ nhÊn vµo nót "
-"®Óthay\n"
-"®æi nÕu thÊy cÇn thiÕt.\n"
-"\n"
-" * Mói giê: mói giê DrakX, theo mÆc ®Þnh, ­íc ®o¸n mói giê cña b¹n theo "
-"ng«n\n"
-"ng÷ b¹n ®· chän. Nh­ng t¹i ®©y, theo sù lùa chän bµn phÝm , b¹n cã thÓ kh«ng "
-"sèng\n"
-"t¹i quèc gia mµ b¹n ®· chän ng«n ng÷, v× vËy b¹n cã thÓ ph¶i nhÊn chuét lªn "
-"nót\n"
-"Mói giê ®Ó cho phÐp b¹n cã thÓ thiÕt lËp ®ång hå theo mói giê cña n¬i b¹n\n"
-"®ang ë.\n"
-"\n"
-" * M¸y in: NhÊn chuét lªn nót Kh«ng cã M¸y in sÏ më ®å thuËt cÊu h×nh\n"
-"m¸y in.\n"
-"\n"
-" * Card ©m thanh: nÕu cã card ©m thanh ®­îc ph¸t hiÖn trong hÖ thèng, nã sÏ "
-"®­îc\n"
-"hiÓn thÞ ë ®©y. Nh­ng kh«ng cã kh¶ n¨ng thay ®æi trong khi thùc hiÖn cµi "
-"®Æt.\n"
-"\n"
-" * Card TV: nÕu mét card TV ®­îc ph¸t hiÖn trong hÖ thèng, nã sÏ ®­îc hiÓn "
-"thÞ.\n"
-"Nh­ng kh«ng cã kh¶ n¨ng thay ®æi trong khi thùc hiÖn cµi ®Æt.\n"
-"\n"
-" * Card ISDN: nÕu mét card ISDN ®­îc ph¸t hiÖn trong hÖ thèng, nã sÏ ®­îc "
-"hiÓn thÞ ë\n"
-"®©y. B¹n cã thÓ nhÊn vµo nót ®Ó thay ®æi c¸c th«ng sè liªn quan."
-
-#: ../../help.pm_.c:827
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"H·y chän æ cøng mµ b¹n muèn xo¸ ®Ó cµi ®Æt ph©n\n"
-"vïng Mandrake Linux míi. H·y thËn träng, mäi d÷ liÖu cã trªn ®ã sÏ bÞ mÊt\n"
-"vµ kh«ng thÓ kh«i phôc l¹i ®­îc."
-
-#: ../../help.pm_.c:832
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"NhÊp chuét lªn \"OK\" nÕu b¹n muèn xãa mäi d÷ liÖu vµ\n"
-"c¸c ph©n vïng hiÖn cã trªn æ cøng nµy. L­u ý, sau khi nhÊp chuét lªn \"OK\", "
-"b¹n\n"
-"sÏ kh«ng thÓ kh«i phôc d÷ liÖu vµ c¸c ph©n vïng hiÖn cã trªn æ cøng nµy,\n"
-"kÓ c¶ d÷ liÖu cña Windows.\n"
-"\n"
-"\n"
-"NhÊp chuét lªn \"Bá qua\" ®Ó th«i ch¹y ch­¬ng tr×nh vµ kh«ng lµm mÊt \n"
-"bÊt kú d÷ liÖu vµ c¸c ph©n vïng trªn æ ®Üa cøng nµy."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"B¹n ®· chän c¸c m¸y chñ sau ®©y: %s\n"
-"\n"
-"\n"
-"C¸c m¸y chñ nµy sÏ ®­îc kÝch ho¹t theo mÆc ®Þnh. Chóng kh«ng cã bÊt cø mét "
-"phiªn b¶n ph¸t hµnh b¶o mËt nµo\n"
-", nh­ng mét sè m¸y chñ míi sÏ kh«ng thÓ ®­îc t×m thÊy.Trong tr­êng hîp nh­ "
-"vËy,b¹n ph¶i n©ng cÊp\n"
-"cµng sím cµng tèt.\n"
-"\n"
-"\n"
-"B¹n cã thùc sù muèn cµi ®Æt c¸c m¸y chñ nµy?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kh«ng thÓ dïng ph¸t thanh khi kh«ng cã tªn vïng NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "N¹p mét ®Üa mÒm ®· format vµo æ %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "§Üa mÒm nµy kh«ng ph¶i ®Þnh d¹ng FAT "
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"§Ó sö dông c¸c gãi cøu ch÷a ®· ®­îc l­u, khëi ®éng cµi ®Æt b»ng ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Lçi khi ®äc tËp tin %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "OK"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Mét sè phÇn cøng cña m¸y tÝnh cÇn c¸c driver ``proprietary'' ®Ó ho¹t ®éng.\n"
-"B¹n cã thÓ t×m th«ng tin vÒ chóng t¹i: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"B¹n ph¶i cã mét ph©n vïng root.\n"
-"Muèn vËy, h·y t¹o mét ph©n vïng (hoÆc nhÊp chuét lªn mét ph©n vïng s½n cã).\n"
-"Sau ®ã chän ``§iÓm g¾n kÕt'' vµ g¾n nã vµo `/'"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "B¹n ph¶i cã mét ph©n vïng trao ®æi (swap)"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Kh«ng cã ph©n vïng trao ®æi (swap)\n"
-"\n"
-"VÉn tiÕp tôc?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "B¹n ph¶i cã mét ph©n vïng FAT ®­îc kÕt g¸n vµo /boot/efi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Dïng kh«ng gian trèng"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Kh«ng ®ñ kh«ng gian trèng ®Ó t¹o c¸c ph©n vïng míi"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Dïng ph©n vïng hiÖn thêi"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "Kh«ng cã ph©n vïng hiÖn thêi ®Ó dïng"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Dïng ph©n vïng Windows ®Ó loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Ph©n vïng nµo b¹n muèn sö dông cho Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Chän kÝch th­íc"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "KÝch th­íc ph©n vïng root theo MB: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "KÝch th­íc ph©n vïng swap theo MB: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Dïng kh«ng gian trèng cña ph©n vïng Windows"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "B¹n muèn lËp l¹i kÝch th­íc ph©n vïng nµo?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "§ang tÝnh to¸n ph¹m vi hÖ thèng tËp tin cña Windows"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Sù lËp l¹i kÝch th­íc FAT kh«ng thÓ qu¶n lý ph©n vïng cña b¹n, \n"
-"x¶y ra lçi nh­ sau: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Ph©n vïng Windows bÞ ph©n m¶nh nhiÒu, h·y ch¹y ``defrag'' tr­íc"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"C¶nh B¸o!\n"
-"\n"
-"DrakX sÏ chØnh l¹i kÝch th­íc ph©n vïng Windows. H·y thËn träng: ho¹t ®éng\n"
-"nµy nguy hiÓm. NÕu b¹n ch­a tiÕn hµnh, tr­íc hÕt h·y tho¸t ra khái qu¸ "
-"tr×nh\n"
-"cµi ®Æt, ch¹y tr×nh kiÓm tra æ ®Üa trong Windows (vµ tèt nhÊt lµ ch¹y c¶ "
-"tr×nh dån ®Üa),\n"
-"sau ®ã ch¹y l¹i tr×nh cµi ®Æt. B¹n còng nªn sao l­u d÷ liÖu.\n"
-"Khi thùc hiÖn xong, h·y nhÊn OK."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "B¹n muèn gi÷ kÝch th­íc nµo cho Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "Ph©n vïng %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Kh«ng thiÕt lËp l¹i ®­îc kÝch th­íc FAT: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Kh«ng cã ph©n vïng FAT nµo ®Ó thiÕt lËp l¹i kÝch th­íc hoÆc ®Ó loopback "
-"(hoÆc kh«ng ®ñ kh«ng gian trèng)."
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Xo¸ toµn bé ®Üa"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Xo¸ Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "B¹n cã h¬n mét ®Üa cøng, b¹n cµi ®Æt Linux lªn ®Üa nµo?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Toµn bé c¸c ph©n vïng vµ d÷ liÖu hiÖn cã sÏ bÞ xãa khái æ ®Üa %s"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Tïy chØnh ph©n vïng ®Üa "
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Dïng fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"B©y giê b¹n cã thÓ ph©n vïng %s.\n"
-"Khi hoµn thµnh, ®õng quªn l­u l¹i b»ng `w'"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "B¹n kh«ng cã ®ñ kh«ng gian trèng trªn ph©n vïng Windows"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Kh«ng t×m ®­îc n¬i cµi ®Æt"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "§å thuËt ph©n vïng cña DrakX t×m ra c¸c gi¶i ph¸p nh­ sau:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Qu¸ tr×nh ph©n vïng háng: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "BËt chøc n¨ng m¹ng"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "T¾t chøc n¨ng m¹ng"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Cã lçi x¶y ra, kh«ng râ c¸ch gi¶i quyÕt thÝch hîp.\n"
-"TiÕp tôc víi rñi ro."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Sao chÐp ®iÓm g¾n kÕt %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Mét sè gãi ®· kh«ng ®­îc cµi ®Æt ®óng ®¾n.\n"
-"Cã thÓ do æ ®Üa cdrom hoÆc ®Üa cdrom cña b¹n bÞ lçi.\n"
-"KiÓm tra cdrom trªn m¸y tÝnh b»ng \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Chµo mõng %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Kh«ng cã æ ®Üa mÒm"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "§i vµo giai ®o¹n `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Chän kÝch th­íc b¹n muèn cµi ®Æt"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Tæng sè kÝch th­íc:"
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Phiªn b¶n: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "KÝch th­íc: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Chän c¸c gãi b¹n muèn cµi ®Æt "
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Th«ng tin"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Cµi ®Æt"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "§ang cµi ®Æt"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "H·y ®îi,"
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Thêi gian cßn l¹i"
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Tæng sè thêi gian"
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "ChuÈn bÞ cµi ®Æt"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "§ang cµi ®Æt gãi %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "VÉn cø tiÕp tôc?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Lçi khi ®ang xö lý c¸c gãi:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Dïng cÊu h×nh hiÖn cã cho X11?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"HÖ thèng cña b¹n cã cÊu h×nh thÊp. B¹n cã thÓ gÆp ph¶i mét sè trôc trÆc khi\n"
-"cµi ®Æt Mandrake Linux. NÕu x¶y ra lçi, b¹n cã thÓ thay thÕ b»ng kiÓu cµi "
-"®Æt trong\n"
-"chÕ ®é v¨n b¶n b»ng c¸ch nhÊn phÝm `F1' khi khëi ®éng tõ CDROM, råi nhËp "
-"`text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "KiÓu cµi ®Æt"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "H·y chän mét trong c¸c lo¹i cµi ®Æt sau ®©y:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"KÝch th­íc tæng céng cña c¸c nhãm sÏ cµi ®Æt mµ b¹n chän kho¶ng %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"NÕu b¹n muèn cµi ®Æt thÊp h¬n kÝch th­íc nµy,\n"
-"h·y chän tû lÖ phÇn tr¨m cña c¸c gãi mµ b¹n muèn cµi ®Æt.\n"
-"\n"
-"Víi tû lÖ phÇn tr¨m thÊp sÏ chØ cã c¸c gãi quan träng nhÊt ®­îc cµi ®Æt;\n"
-"Víi tû lÖ 100%% sÏ cµi ®Æt toµn bé c¸c gãi ®­îc chän."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Kh«ng gian trªn ®Üa chØ cho phÐp %d%% cña c¸c gãi nµy.\n"
-"\n"
-"NÕu b¹n muèn cµi ®Æt Ýt h¬n tû lÖ nµy, h·y\n"
-"chän tû lÖ phÇn tr¨m c¸c gãi b¹n muèn cµi ®Æt.\n"
-"Víi tû lÖ phÇn tr¨m thÊp sÏ chØ cã c¸c gãi quan träng nhÊt ®­îc cµi ®Æt;\n"
-"Víi tû lÖ %d%% sÏ cµi ®Æt cµng nhiÒu gãi cµng tèt."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "B¹n sÏ cã thÓ chän chóng mét c¸ch cô thÓ h¬n ë b­íc sau."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Tû lÖ phÇn tr¨m c¸c gãi cµi ®Æt"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Nhãm gãi tin ®­îc chän"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "C¸c gãi riªng ®­îc chän"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "KÝch th­íc toµn bé: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Gãi háng"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "Tªn: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Quan träng: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "B¹n kh«ng thÓ chän gãi nµy v× kh«ng cßn ®ñ kh«ng gian ®Ó cµi ®Æt"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "C¸c gãi sau ®©y sÏ ®­îc cµi ®Æt"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "C¸c gãi sau ®©y sÏ ®­îc bá ra"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "B¹n kh«ng thÓ chän/bá chän gãi nµy"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Gãi nµy b¾t buéc chän, kh«ng thÓ bá chän nã"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "B¹n kh«ng thÓ bá chän gãi nµy. Nã ®­îc cµi ®Æt råi"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Gãi nµy ph¶i ®­îc n©ng cÊp\n"
-"B¹n cã ch¾n lµ muèn bá chän nã kh«ng?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "B¹n kh«ng thÓ kh«ng chän gãi nµy. Nã ph¶i ®­îc n©ng cÊp."
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "HiÓn thÞ c¸c gãi ®­îc chän tù ®éng"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "T¶i/L­u vµo ®Üa mÒm"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "§ang cËp nhËt sù lùa chän c¸c gãi"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "Cµi ®Æt tèi thiÓu"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "§ang ­íc l­îng"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "H·y chê, ®ang chuÈn bÞ cµi ®Æt."
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d gãi"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"C¶nh B¸o\n"
-"\n"
-"H·y ®äc kü c¸c ®iÒu kho¶n d­íi ®©y. NÕu b¹n kh«ng chÊp thuËn víi bÊt\n"
-"cø phÇn nµo, b¹n sÏ kh«ng ®­îc phÐp cµi ®Æt ®Üa CD tiÕp theo. NhÊp vµo\n"
-"'Tõ chèi' ®Ó tiÕp tôc cµi ®Æt vµ kh«ng sö dông c¸c ®Üa nµy.\n"
-"\n"
-"\n"
-"Mét sè thµnh phÇn trong CD tiÕp theo kh«ng tu©n theo \n"
-"GPL License hoÆc t­¬ng tù. Mçi mét thµnh phÇn nµy l¹i \n"
-"tu©n theo c¸c ®iÒu kiÖn vµ ®iÒu kho¶n trong giÊy phÐp riªng cña nã. \n"
-"H·y ®äc kü vµ chÊp thuËn c¸c giÊy phÐp ®i kÌm tr­íc khi b¹n \n"
-"sö dông hoÆc ph©n phèi l¹i c¸c thµnh phÇn ®· ®­îc ®Ò cËp. \n"
-"C¸c giÊy phÐp nµy nãi chung sÏ ng¨n chÆn viÖc trao ®æi, sao \n"
-"chÐp (trõ c¸c môc ®Ých sao l­u dù phßng), ph©n phèi l¹i, ®¶o \n"
-"lén, th¸o rêi, bá biªn dÞch hoÆc thay ®æi thµnh phÇn. \n"
-"BÊt kú mét ph¹m vi chÊp thuËn nµo ®ã còng sÏ giíi h¹n ngay quyÒn \n"
-"cña b¹n bëi giÊy phÐp. Trõ khi lµ c¸c ®iÒu kho¶n trong giÊy phÐp\n"
-"cho b¹n quyÒn, b¹n kh«ng thÓ cµi ®Æt c¸c ch­¬ng tr×nh cho nhiÒu \n"
-"m¸y tÝnh, hoÆc sö dông chóng trªn m¹ng. NÕu cã vÊn ®Ò g× kh«ng \n"
-"râ, h·y liªn hÖ trùc tiÕp víi nhµ ph©n phèi hoÆc ng­êi viÕt ch­¬ng tr×nh. \n"
-"ChuyÓn cho bªn thø ba hoÆc sao chÐp c¸c thµnh phÇn nµy lu«n bÞ \n"
-"ng¨n cÊm.\n"
-"\n"
-"\n"
-"Mäi quyÒn sö dông c¸c thµnh phÇn ë CD tiÕp theo thuéc së h÷u \n"
-"cña c¸c t¸c gi¶ vµ ®­îc b¶o vÖ bëi luËt së h÷u trÝ tuÖ vµ b¶n quyÒn \n"
-"¸p dông cho c¸c ch­¬ng tr×nh phÇn mÒm.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "ChÊp thuËn"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Tõ chèi"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"§æi ®Üa CD!\n"
-"\n"
-"H·y n¹p ®Üa CD cã nh·n \"%s\" vµo æ ®Üa råi nhÊn OK khi ®· xong.\n"
-"NÕu b¹n kh«ng cã, nhÊn Bá qua ®Ó kh«ng ch¹y cµi ®Æt tõ ®Üa nµy."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Lçi khi ®ang cµi ®Æt c¸c gãi:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Lçi x¶y ra"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "ChÊp thuËn giÊy phÐp"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Giíi ThiÖu\n"
-"\n"
-"HÖ ®iÒu hµnh vµ c¸c thµnh phÇn kh¸c cã trong s¶n phÈm ph©n phèi cña Mandrake "
-"Linux \n"
-"sÏ gäi lµ \"C¸c S¶n PhÈm PhÇn MÒm\" . C¸c S¶n PhÈm PhÇn MÒm bao gåm, nh­ng "
-"kh«ng \n"
-"bÞ giíi h¹n, mét bé c¸c ch­¬ng tr×nh, ph­¬ng ph¸p, quy t¾c vµ tµi liÖu liªn "
-"quan ®Õn hÖ ®iÒu hµnh \n"
-"vµ c¸c thµnh phÇn kh¸c cã trong s¶n phÈm ph©n phèi Mandrake Linux.\n"
-"\n"
-"\n"
-"1. ChÊp ThuËn GiÊy PhÐp\n"
-"\n"
-"H·y ®äc cÈn thËn tµi liÖu nµy. Nã lµ sù chÊp thuËn giÊy phÐp gi÷a b¹n vµ  \n"
-"MandrakeSoft S.A. ®­îc ¸p dông cho c¸c S¶n PhÈm PhÇn MÒm.\n"
-"B»ng viÖc cµi ®Æt, sao chÐp hay sö dông S¶n PhÈm PhÇn MÒm theo c¸ch \n"
-"nµo ®ã th× hiÓn nhiªn b¹n ®ång ý vµ chÊp thuËn toµn bé c¸c ®iÒu kho¶n vµ "
-"®iÒu kiÖn cña giÊy phÐp nµy. \n"
-"NÕu b¹n kh«ng chÊp thuËn bÊt kú mét ®iÒu kho¶n nµo, b¹n kh«ng ®­îc phÐp cµi "
-"®Æt, sao chÐp hay sö dông \n"
-"c¸c S¶n PhÈm PhÇn MÒm. \n"
-"Mäi cè g¾ng cµi ®Æt, sao chÐp hay sö dông S¶n PhÈm PhÇn MÒm nµy theo c¸ch "
-"kh«ng tu©n theo \n"
-"c¸c ®iÒu kho¶n vµ ®iÒu kiÖn trong giÊy phÐp sÏ bÞ cÊm vµ chÊm døt quyÒn cña "
-"b¹n theo giÊy phÐp nµy.\n"
-"B¹n ph¶i xo¸ ngay lËp tøc tÊt c¶ sù sao chÐp c¸c \n"
-"S¶n PhÈm PhÇn MÒm nµy.\n"
-"\n"
-"\n"
-"2. Giíi H¹n B¶o §¶m\n"
-"\n"
-"C¸c s¶n phÈm phÇn mÒm vµ tµi liÖu ®i kÌm ®­îc cung cÊp \"nh­ lµ\", kh«ng cã "
-"sù b¶o ®¶m, theo\n"
-"ph¹m vi cho phÐp cña luËt ph¸p.\n"
-"MandrakeSoft S.A. sÏ tù cã tr¸ch nhiÖm ph¸p lý ë mét møc ®é nµo ®ã vÒ c¸c h­ "
-"háng ¶nh h­ëng tíi c«ng viÖc lµm ¨n.\n"
-"\n"
-"3. GiÊy phÐp GPL vµ c¸c giÊy phÐp liªn quan\n"
-"\n"
-"C¸c S¶n PhÈm PhÇn MÒm gèm cã c¸c phÇn mÒm ®­îc lµm ra bëi c¸c c¸ nh©n vµ tæ "
-"chøc kh¸c nhau.\n"
-"HÇu hÕt c¸c thµnh phÇn nµy ®­îc qu¶n lý bëi c¸c ®iÒu kho¶n vµ ®iÒu kiÖncña "
-"GNU/GPL.\n"
-"sau nµy gäi lµ \"GPL\", hoÆc c¸c giÊy phÐp t­¬ng tù. HÇu hÕt c¸c giÊy phÐp "
-"nµy cho phÐp b¹n sö dông, \n"
-"sao chÐp, chØnh söa l¹i, hoÆc ph©n phèi l¹i c¸c thµnh phÇn mµ nã ®Ò cËp. H·y "
-"®äc ký c¸c ®iÒu kho¶n \n"
-"vµ c¸c ®iÒu kiÖn trong giÊy phÐp cña tõng thµnh phÇn tr­íc khi sö dông "
-"chóng. Mäi c©u hái \n"
-"vÒ giÊy phÐp cña c¸c thµnh phÇn nªn ®­îc göi tíi t¸c gi¶ mµ kh«ng göi tíi "
-"MandrakeSoft.\n"
-"C¸c ch­¬ng tr×nh do MandrakeSoft S.A.ph¸t triÓn ®­îc qu¶n lý theo giÊy phÐp "
-"GPL. Tµi liÖu do\n"
-"MandrakeSoft S.A. viÕt ®­îc qu¶n lý bëi mét giÊy phÐp ®Æc biÖt. H·y tham "
-"kh¶o tµi liÖu ®Ó \n"
-"biÕt thªm chi tiÕt.\n"
-"\n"
-"\n"
-"4. QuyÒn së h÷u trÝ tuÖ\n"
-"\n"
-"Toµn bé quyÒn ®èi víi c¸c thµnh phÇn cña S¶n PhÈm PhÇn MÒm lµ thuéc vÒ c¸c "
-"t¸c gi¶ cña chóng vµ\n"
-"®­îc b¶o vÖ bëi luËt së h÷u trÝ tuÖ vµ luËt b¶n quyÒn ¸p dông cho c¸c ch­¬ng "
-"tr×nh phÇn mÒm.\n"
-"MandrakeSoft S.A. gi÷ quyÒn thay ®æi hoÆc chØnh söa c¸c S¶n PhÈm PhÇn MÒm "
-"toµn bé hay mét\n"
-"phÇn.\n"
-"\"Mandrake\", \"Mandrake Linux\" vµ c¸c logo cña nã lµ nh·n ®¨ng ký cña "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Bµn phÝm"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "H·y chän tæ chøc bµn phÝm"
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "§©y lµ danh s¸ch ®Çy ®ñ c¸c bµn phÝm hiÖn cã "
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "B¹n muèn chän kiÓu cµi ®Æt nµo?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Cµi ®Æt/CËp nhËt"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "§©y lµ cµi ®Æt hay cËp nhËt?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Gîi ý"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Chuyªn gia"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "CËp nhËt"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "H·y chän kiÓu chuét"
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Cæng chuét"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "H·y chän cæng nèi tiÕp mµ b¹n g¾n chuét vµo."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "M« pháng c¸c nót"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "M« pháng nót 2"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "M« pháng nót 3"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "§ang cÊu h×nh card PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "§ang cÊu h×nh IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "kh«ng cã s½n c¸c ph©n vïng"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "QuÐt c¸c ph©n vïng ®Ó t×m ®iÓm g¾n kÕt"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Chän ®iÓm g¾n kÕt"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Kh«ng ®äc ®­îc b¶ng ph©n vïng, nã bÞ háng nÆng :(\n"
-"Cè g¾ng tiÕp tôc trªn c¸c ph©n vïng trèng bÞ háng (Mäi d÷ liÖu sÏ bÞ mÊt!).\n"
-"Gi¶i ph¸p kh¸c lµ cÊm DrakX thay ®æi b¶ng ph©n vïng.\n"
-"(Lçi nh­ sau %s)\n"
-"\n"
-"B¹n cã ®ång ý ®Ó mÊt toµn bé c¸c ph©n vïng?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake kh«ng thÓ ®äc chÝnh x¸c b¶ng ph©n vïng.\n"
-"TiÕp tôc sÏ gÆp nguy c¬!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Kh«ng cßn kh«ng gian trèng 1MB cho bÉy khëi ®éng! TiÕp tôc cµi ®Æt, nh­ng ®Ó "
-"khëi ®éng hÖ thèng, b¹n cÇn t¹o ph©n vïng bÉy khëi ®éng trong DiskDrake."
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "Kh«ng cã ph©n vïng root ®Ó thùc hiÖn n©ng cÊp"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Ph©n vïng root"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "§©u lµ ph©n vïng root (/) cña hÖ thèng?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "B¹n cÇn khëi ®éng l¹i ®Ó c¸c thay ®æi trong b¶ng ph©n vïng cã t¸c dông"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "H·y chän c¸c ph©n vïng b¹n muèn format"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "KiÓm tra lçi bÒ mÆt ®Üa?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "§ang format c¸c ph©n vïng"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "§ang t¹o vµ format tËp tin %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Swap kh«ng ®ñ ®Ó thùc hiÖn cµi ®Æt, h·y t¨ng thªm"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "§ang t×m c¸c gãi hiÖn cã"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "§ang t×m c¸c gãi ®Ó n©ng cÊp"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"HÖ thèng kh«ng ®ñ kh«ng gian ®Ó thùc hiÖn cµi ®Æt hay n©ng cÊp (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Hoµn thµnh (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Tèi thiÓu (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Gîi ý (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "Tïy chØnh"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"H·y chän t¶i hay l­u lùa chän gãi tin vµo ®Üa mÒm.\n"
-"§Þnh d¹ng gièng nh­ c¸c ®Üa mÒm ®­îc t¹o ra khi cµi ®Æt tù ®éng."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "T¶i tõ ®Üa mÒm"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "§ang t¶i tõ ®Üa mÒm"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Sù lùa chän gãi tin"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "N¹p mét ®Üa mÒm cã chøa sù lùa chän gãi tin"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "L­u vµo ®Üa mÒm"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Cì ®­îc chän qu¸ lín so víi kho¶ng trèng cã thÓ dïng"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"NÕu b¹n cã ®ñ ®Üa CD trong danh s¸ch d­íi ®©y, nhÊn OK.\n"
-"NÕu b¹n kh«ng cã CD nµo trong sè nµy, nhÊn Bá qua.\n"
-"NÕu chØ thiÕu mét sè CD, bá chän chóng, råi nhÊn OK."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom mang nh·n \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"§ang cµi ®Æt gãi %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "CÊu h×nh sau khi cµi ®Æt"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "N¹p ®Üa mÒm khëi ®éng vµo æ ®Üa %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "N¹p mét ®Üa mÒm chøa c¸c m«-®un cËp nhËt vµo æ ®Üa %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"B©y giê b¹n cã thÓ t¶i phÇn mÒm m· hãa vÒ dïng.\n"
-"\n"
-"C¶nh b¸o:\n"
-"\n"
-"V× c¸c nhu cÇu chung kh¸c nhau ®Ó sö dông phÇn mÒm nµy d­íi sù r»ng buéc\n"
-"ph¸p lý kh¸c nhau, kh¸ch hµng vµ/hoÆc ng­êi dïng ®Çu cuèi sö dông phÇn\n"
-"mÒm nµy nªn kh¼ng ®Þng r»ng luËt ph¸p n­íc m×nh cho phÐp t¶i xuèng, l­u\n"
-"gi÷ vµ/hoÆc sö dông.\n"
-"\n"
-"H¬n n÷a, kh¸ch hµng vµ/hoÆc ng­êi dïng ®Çu cuèi sÏ ph¶i biÕt lµ viÖc nµy\n"
-"kh«ng vi ph¹m luËt ph¸p.\n"
-"\n"
-"\n"
-"Kh«ng mét bé phËn nµo cña Mandrakesoft vµ/hoÆc c¸c nhµ cung cÊp chÞu tr¸ch\n"
-"nhiÖn vÒ c¸c sù cè ®Æc biÖt trùc tiÕp hay gi¸n tiÕp (bao gåm, nh­ng kh«ng\n"
-"bÞ giíi h¹n cho c¸c mÊt m¸t lîi Ých, gi¸n ®o¹n c«ng viÖc, mÊt d÷ liÖu th­¬ng "
-"m¹i\n"
-"vµ c¸c vÊn ®Ò tµi chÝnh kh¸c, thËm chÝ c¸c tr¸ch nhiÖm vµ båi th­êng ph¶i "
-"tr¶\n"
-"theo quyÕt ®Þnh cña toµ ¸n) n¶y sinh khi sö dông, së h÷u, hay chØ t¶i xuèng\n"
-"c¸c phÇn mÒm nµy, do ®ã kh¸ch hµng vµ/hoÆc ng­êi dïng ®Çu cuèi cã thÓ\n"
-"tiÕn hµnh sau khi ®¨ng ký vµo phÇn giao kÌo hiÖn thêi.\n"
-"\n"
-"\n"
-"NÕu muèn hái thªm vÒ vÊn ®Ò nµy, h·y liªn hÖ víi \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Chän mét mirror ®Ó t¶i c¸c gãi vÒ"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "§ang liªn hÖ víi mirror ®Ó lÊy danh s¸ch c¸c gãi hiÖn cã"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "H·y chän c¸c gãi b¹n muèn cµi ®Æt"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Mói giê nµo lµ cña b¹n?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "§ång hå trong m¸y ®Æt theo GMT"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "§ång bé hãa tù ®éng thêi gian (dïng NTP)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "M¸y chñ NTP"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "M¸y chñ CUPS ë xa"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Kh«ng cã m¸y in"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Tãm t¾t"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Chuét"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Mói giê"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "M¸y in"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "Card ISDN"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Card ©m thanh"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "Card TV"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "C¸c tËp tin côc bé"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "ThiÕt lËp mËt khÈu root"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Kh«ng cã mËt khÈu"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "MËt khÈu nµy ®¬n gi¶n qu¸ ( ph¶i gåm Ýt nhÊt %d ký tù)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "X¸c nhËn"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "Chøng thùc "
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "M¸y chñ LDAP"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "Chøng thùc NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "MiÒn NIS"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "M¸y chñ NIS"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Mét ®Üa mÒm khëi ®éng gióp khëi ®éng hÖ thèng Linux cña b¹n mµ \n"
-"kh«ng phô thuéc vµo tr×nh khëi ®éng th«ng th­êng. C¸ch nµy h÷u dông nÕu\n"
-"b¹n kh«ng muèn cµi ®Æt SILO, hay SILO bÞ hÖ ®iÒu hµnh kh¸c xo¸, hay SILO "
-"kh«ng\n"
-"ho¹t ®éng víi cÊu h×nh phÇn cøng cña b¹n. §Üa mÒm khëi ®éng còng cã thÓ "
-"dïng\n"
-"víi ¶nh cøu gi¶i cña Mandrake, t¹o ®iÒu kiÖn dÔ dµng phôc håi hÖ thèng khi "
-"gÆp\n"
-"sù cè.\n"
-"\n"
-"NÕu b¹n muèn t¹o mét ®Üa mÒm khëi ®éng, n¹p mét ®Üa mÒm vµo æ ®Üa mÒm\n"
-"thø nhÊt vµ nhÊn \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "æ ®Üa mÒm thø nhÊt"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "æ ®Üa mÒm thø hai"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Cho qua"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Mét ®Üa mÒm khëi ®éng gióp khëi ®éng hÖ thèng Linux cña b¹n mµ \n"
-"kh«ng phô thuéc vµo tr×nh khëi ®éng th«ng th­êng. C¸ch nµy h÷u dông nÕu\n"
-"b¹n kh«ng muèn cµi ®Æt LILO (hoÆc grub), hay LILO bÞ hÖ ®iÒu hµnh kh¸c xo¸, "
-"hay LILO kh«ng\n"
-"ho¹t ®éng víi cÊu h×nh phÇn cøng cña b¹n. §Üa mÒm khëi ®éng còng cã thÓ "
-"dïng\n"
-"víi ¶nh cøu gi¶i cña Mandrake, t¹o ®iÒu kiÖn dÔ dµng phôc håi hÖ thèng khi "
-"gÆp\n"
-"sù cè.B¹n cã muèn t¹o mét ®Üa mÒm khëi ®éng cho hÖ thèng kh«ng?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Xin lçi, kh«ng cã æ ®Üa mÒm nµo c¶"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Chän æ ®Üa mÒm b¹n muèn dïng ®Ó t¹o ®Üa khëi ®éng"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "N¹p ®Üa mÒm vµo æ ®Üa %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "§ang t¹o ®Üa khëi ®éng"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "§ang chuÈn bÞ tr×nh khëi ®éng"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Cã vÎ nh­ m¸y tÝnh ®· l¹c hËu hoÆc kh«ng cßn ®­îc\n"
-" biÕt ®Õn, tr×nh khëi ®éng yaboot sÏ kh«ng lµm viÖc.\n"
-"TiÕp tôc cµi ®Æt, nh­ng b¹n sÏ cÇn ph¶i\n"
-" sö dông BootX ®Ó khëi ®éng m¸y tÝnh."
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "B¹n cã muèn sö dông aboot kh«ng?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Lçi khi cµi ®Æt aboot, \n"
-"Cè g¾ng cµi ®Æt kÓ c¶ khi nã cã thÓ ph¸ háng ph©n vïng ®Çu tiªn?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-msgid "Installing bootloader"
-msgstr "§ang cµi ®Æt tr×nh n¹p khëi ®éng"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Kh«ng cµi ®Æt ®­îc tr×nh khëi ®éng. X¶y ra lçi nh­ sau:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"B¹n cÇn thay ®æi thiÕt bÞ khëi ®éng Tr×nh C¬ Së Më ®Ó cho phÐp\n"
-" ch¹y tr×nh khëi ®éng. NÕu kh«ng nh×n thÊy dÊu nh¾c cña tr×nh\n"
-" khëi ®éng khi khëi ®éng l¹i, nhÊn vµ gi÷ Command-Option-O-F\n"
-" lóc khëi ®éng l¹i råi nhËp:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Råi gâ: shut-down\n"
-"LÇn khëi ®éng tiÕp theo, b¹n sÏ nh×n thÊy dÊu nh¾c cña tr×nh khëi ®éng."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "ThÊp"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Trung b×nh"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Cao"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Chän møc b¶o mËt"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "N¹p mét ®Üa mÒm tr¾ng vµo æ %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "§ang t¹o ®Üa mÒm cµi ®Æt tù ®éng"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Mét sè b­íc ch­a ®­îc hoµn thµnh.\n"
-"\n"
-"B¹n thùc sù muèn tho¸t ra b©y giê?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Chóc mõng b¹n, qu¸ tr×nh cµi ®Æt ®· hoµn thµnh.\n"
-"LÊy ®Üa khëi ®éng ra vµ nhÊn return ®Ó khëi ®éng l¹i.\n"
-"\n"
-"VÒ th«ng tin söa lçi cã s½n cho c¸c phiªn b¶n cña Mandrake Linux,\n"
-"h·y tham kh¶o Errata cã t¹i http://www.mandrakelinux.com/.\n"
-"\n"
-"Th«ng tin cÊu h×nh hÖ thèng cã s½n trong ch­¬ng 'sau cµi ®Æt' cña\n"
-"h­íng dÉn chÝnh sö dông Linux(Official Mandrake Linux User's Guide)"
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "T¹o ®Üa mÒm cµi ®Æt tù ®éng"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Cµi ®Æt tù ®éng cã thÓ hoµn toµn tù ®éng nÕu\n"
-"muèn, trong tr­êng hîp nµy nã sÏ tiÕp nèi æ cøng!!\n"
-"(NghÜa lµ tiÕn hµnh cµi ®Æt lªn mét æ kh¸c).\n"
-"\n"
-"Cã thÓ b¹n thÝch diÔn l¹i qu¸ tr×nh cµi ®Æt.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Tù ®éng"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "DiÔn l¹i"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "L­u lùa chän c¸c gãi"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Cµi ®Æt Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> gi÷a c¸c phÇn tö  | <Space> chän | <F12> mµn h×nh tiÕp "
-"theo "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "mÊt kdesu"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "Chän mét tËp tin"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "N©ng cao"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "H·y ®îi"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Më réng C©y"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Thu gän C©y"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "ChuyÓn gi÷a d·y vµ nhãm ®­îc ph©n lo¹i"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Kh«ng râ (%s), h·y lµm chÝnh x¸c h¬n\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Chän tåi, h·y thö l¹i\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (mÆc ®Þnh %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Lùa chän cña b¹n? (mÆc ®Þnh %s)"
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Lùa chän cña b¹n? (mÆc ®Þnh %s  nhËp `kh«ng cã' khi kh«ng cã) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Czech (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "§øc"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "T©y ban nha"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "PhÇn lan"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Ph¸p"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Na uy"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Ba lan"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Nga"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Thôy ®iÓn"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Bµn phÝm Anh"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "Bµn phÝm Mü"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Albanian"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Mü (cæ)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Mü (m¸y ch÷)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Mü (ng÷ ©m)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latin)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "BØ"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulgarian"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilian (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Belarusian"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Thôy sü (bµn phÝm §øc)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Thôy sü (bµn phÝm Ph¸p)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Czech (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "§øc (kh«ng cã phÝm chÕt)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "§an m¹ch"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegian)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estonian"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr " (Georgian (\"Russian\" layout)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Tæ chøc bµn phÝm Georgian (\"Latin\")"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Hy l¹p"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Hungarian"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Croatian"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Israeli"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Israeli (Phonetic)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iranian"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Icelandic"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "ý"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "NhËt b¶n 106 keys"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Bµn phÝm Hµn quèc"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Latin American"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lithuanian AZERTY (old)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lithuanian AZERTY (new)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lithuanian \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lithuanian \"phonetic\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-msgid "Latvian"
-msgstr "Latvian"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Macedonian"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Dutch"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Polish (qwerty layout)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Polish (qwertz layout)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portuguese"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Canadian (Quebec)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Romanian (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Romanian (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Russian (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Slovenian"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakian (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakian (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "Serbian (cyrillic)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Thai keyboard"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr "Tajik keyboard"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turkish (traditional \"F\" model)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turkish (modern \"Q\" model)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ukrainian"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "US keyboard (international)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamese \"numeric row\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavian (latin)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "C¸c g¾n kÕt vßng %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Bá c¸c æ lý luËn tr­íc tiªn\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Chuét cña h·ng Sun"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "ChuÈn"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generic PS2 Wheel Mouse"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr " nót 1"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "ChuÈn chung"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Wheel"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "serial"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Chuét chuÈn chung 2 nót"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Chuét chuÈn chung 3 nót"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serial, old C7 type)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 nót"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 nót"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "kh«ng cã"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Kh«ng cã chuét"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "H·y thö chuét"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "§Ó chuét ho¹t ®éng,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "H·y l¨n chuét!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "KÕt thóc"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "TiÕp theo ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- VÒ tr­íc"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Cã ®óng kh«ng?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "KÕt nèi vµo Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"C¸ch th­êng dïng nhÊt ®Ó kÕt nèi b»ng ADSL lµ PPPOE.\n"
-"Mét sè kÕt nèi dïng PPTP, sè Ýt dïng DHCP.\n"
-"NÕu b¹n kh«ng râ, h·y dïng 'dïng PPPOE'"
-
-#: ../../network/adsl.pm_.c:22
-#, fuzzy
-msgid "Alcatel speedtouch usb"
-msgstr "speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "dïng DHCP"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "dïng PPPOE"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "dïng PPTP"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"B¹n muèn dïng DHCP kh¸ch (client) nµo?\n"
-"MÆc ®Þnh lµ DHCPD"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Kh«ng dß t×m ®­îc adapter m¹ng ethernet.\n"
-"Kh«ng thÓ thiÕt lËp kiÓu kÕt nèi nµy."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Chän giao diÖn m¹ng"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "H·y chän adapter m¹ng b¹n muèn dïng ®Ó kÕt nèi Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "kh«ng t×m thÊy card m¹ng"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "§ang cÊu h×nh m¹ng"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"H·y ®iÒn tªn m¸y chñ cña b¹n nÕu b¹n biÕt. Mét sè\n"
-"m¸y chñ DHCP cÇn tªn chñ (hostname) ®Ó ho¹t ®éng.\n"
-"Tªn m¸y chñ cña b¹n ph¶i cã ®ñ thµnh phÇn, vÝ dô nh­\n"
-" ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Tªn m¸y chñ"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "§å ThuËt CÊu H×nh M¹ng"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem ISDN l¾p ngoµi"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Card ISDN l¾p trong"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Lo¹i nµo lµ kÕt nèi ISDN cña b¹n?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"B¹n thÝch cÊu h×nh ISDN nµo?\n"
-"\n"
-"* CÊu h×nh cò sö dông isdn4net. Nã cã c¸c c«ng cô m¹nh,\n"
-" nh­ng l¹i phøc t¹p cho viÖc cÊu h×nh vµ kh«ng chuÈn.\n"
-"\n"
-"* CÊu h×nh kiÓu míi dÔ hiÓu vµ chuÈn h¬n, nh­ng l¹i Ýt\n"
-" c«ng cô h¬n.\n"
-"\n"
-"Chóng t«i khuyÕn c¸o nªn dïng cÊu h×nh ®¬n gi¶n nµy.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "CÊu h×nh míi (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "CÊu h×nh cò (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "CÊu h×nh ISDN"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Chän nhµ cung cÊp dÞch vô.\n"
-" NÕu kh«ng cã trong danh s¸ch, chän Kh«ng cã trong danh s¸ch"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "Giao thøc ch©u ¢u"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "Giao thøc ch©u ¢u (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "Giao thøc cho phÇn cßn l¹i cña thÕ giíi"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Giao thøc cho phÇn cßn l¹i cña thÕ giíi \n"
-" kh«ng cã D-Channel (®­êng truyÒn thuª)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "B¹n muèn sö dông giao thøc nµo?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "B¹n cã lo¹i card nµo ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "T«i kh«ng biÕt"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"NÕu b¹n cã card ISA th× gi¸ trÞ trªn mµn h×nh tiÕp theo th­êng ®óng.\n"
-"\n"
-"NÕu b¹n cã card PCMCIA, b¹n cÇn biÕt th«ng sè IRQ vµ IO cña card.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Hñy bá"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "TiÕp tôc"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "C¸i nµo lµ card ISDN cña b¹n?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ph¸t hiÖn ra card ISDN PCI, nh­ng kh«ng biÕt lo¹i nµo. H·y chän mét card PCI "
-"ë mµn h×nh tiÕp theo."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Kh«ng t×m ®­îc card ISDN PCI. H·y chän ë mµn h×nh tiÕp theo"
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "H·y chän cæng nèi tiÕp (serial) nèi víi modem cña b¹n."
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Tïy chän kÕt nèi quay sè"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Tªn kÕt nèi"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Sè ®iÖn tho¹i"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "ID ®¨ng nhËp"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Script-based"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Terminal-based"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "Tªn miÒn"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "M¸y chñ DNS thø nhÊt"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "M¸y chñ DNS thø hai"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"B¹n cã thÓ ng¾t kÕt nèi hoÆc cÊu h×nh l¹i kÕt nèi."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"B¹n cã thÓ cÊu h×nh l¹i kÕt nèi."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "HiÖn t¹i b¹n ®ang kÕt nèi vµo Internet."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"B¹n cã thÓ kÕt nèi vµo Internet hay cÊu h×nh l¹i kÕt nèi."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "HiÖn t¹i b¹n ch­a kÕt nèi vµo Internet"
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "KÕt nèi vµo Internet"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Ng¾t kÕt nèi ra khái Internet"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "CÊu h×nh kÕt nèi m¹ng (LAN hay Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "KÕt nèi Internet vµ cÊu h×nh"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "B©y giê sÏ cÊu h×nh kÕt nèi %s."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"B©y giê lµ lóc cÊu h×nh cho kÕt nèi %s.\n"
-"\n"
-"\n"
-"NhÊn OK ®Ó tiÕp tôc."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "CÊu H×nh M¹ng"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"V× b¹n ®ang cµi ®Æt m¹ng, nh­ng m¹ng cña b¹n ®· ®­îc cÇu h×nh råi.\n"
-"NhÊn OK ®Ó gi÷ cÊu h×nh cña b¹n, hoÆc Bá qua ®Ó cÊu h×nh l¹i kÕt nèi "
-"Internet vµ m¹ng.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Chµo Mõng §å ThuËt CÊu H×nh M¹ng\n"
-"\n"
-"Chóng ta s¾p cÊu h×nh kÕt nèi internet/m¹ng. NÕu b¹n kh«ng\n"
-"muèn dïng chøc n¨ng dß t×m tù ®éng, h·y bá chän ë hép kiÓm.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Chän lý lÞch ®Ó cÊu h×nh"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Dïng chøc n¨ng dß t×m tù ®éng"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "§ang dß t×m thiÕt bÞ..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "KÕt nèi modem b×nh th­êng"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "dß t×m ®­îc t¹i cæng %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "KÕt nèi ISDN"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "dß t×m ®­îc %s"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "KÕt nèi ADSL"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "dß t×m ®­îc trªn giao diÖn %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "KÕt nèi c¸p"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "Ph¸t hiÖn kÕt nèi c¸p"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "KÕt nèi LAN"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "Dß t×m thÊy card ethernet"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Chän kÕt nèi ®Ó cÊu h×nh"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"B¹n ®· cÊu h×nh nhiÒu ®­êng kÕt nèi vµo Internet.\n"
-"H·y chän mét ®­êng kÕt nèi b¹n muèn dïng.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "KÕt nèi Internet"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "B¹n cã muèn bËt kÕt nèi khi khëi ®éng m¸y tÝnh?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "CÊu h×nh m¹ng"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Trôc trÆc x¶y ra khi khëi ®éng l¹i m¹ng: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Chóc mõng, qu¸ tr×nh cÊu h×nh m¹ng vµ internet ®· kÕt thóc.\n"
-"\n"
-"CÊu h×nh b©y giê sÏ ®­îc ¸p dông cho hÖ thèng.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"Sau khi xong, b¹n nªn khëi ®éng l¹i m«i tr­êng X\n"
-"®Ó tr¸nh biÕn ®æi ¶nh h­ëng tíi tªn m¸y chñ (hostname)."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"C¶nh b¸o: ThiÕt bÞ nµy tr­íc ®©y ®· ®­îc cÊu h×nh cho kÕt nèi Internet.\n"
-"§¬n gi¶n chØ viÖc ®ång ý gi÷ thiÕt bÞ ®· ®­îc cÊu h×nh nµy.\n"
-"Thay ®æi c¸c tr­êng d­íi ®©y sÏ ghi ®Ì lªn cÊu h×nh nµy."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"H·y nhËp cÊu h×nh IP cho m¸y tÝnh nµy.\n"
-"Mçi mét môc cÇn ®­îc ®iÒn vµo mét ®Þa chØ IP lµ ký hiÖu thËp\n"
-"ph©n vµ dÊu chÊm ®Çy ®ñ (VD: 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "§ang cÊu h×nh thiÕt bÞ m¹ng %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "§Þa chØ IP"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "MÆt n¹ m¹ng"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "IP tù ®éng"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "§Þa chØ IP ph¶i cã d¹ng 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"H·y ®iÒn tªn m¸y chñ cña b¹n.\n"
-"Tªn m¸y chñ ph¶i lµ tªn ®Çy ®ñ, vÝ dô nh­\n"
-" ``mybox.mylab.myco.com''.\n"
-"B¹n cã thÓ ®iÒn ®Þa chØ IP cña cæng kÕt nèi nÕu b¹n biÕt"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "M¸y chñ DNS"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Cæng kÕt nèi"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "ThiÕt bÞ cæng kÕt nèi"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "CÊu h×nh m¸y chñ ñy nhiÖm"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "M¸y chñ ñy nhiÖm HTTP"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "M¸y chñ ñy nhiÖm FTP"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr "KiÓm tra ®Þnh danh card m¹ng (h÷u Ých cho laptop)"
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "M¸y chñ ñy nhiÖm nªn lµ http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "M¸y chñ ñy nhiÖm nªn lµ ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "CÊu h×nh Internet"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "B¹n cã muèn thö kÕt nèi Internet b©y giê kh«ng?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "§ang kiÓm tra kÕt nèi..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "HÖ thèng b©y giê ®­îc nèi víi Internet."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "V× lý do b¶o mËt, b©y giê ng¾t kÕt nèi."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"HÖ thèng kh«ng cã vÎ nh­ ®ang kÕt nèi víi Internet.\n"
-"Thö cÊu h×nh l¹i kÕt nèi."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "CÊu h×nh kÕt nèi"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "H·y ®iÒn hoÆc kiÓm tra tr­êng d­íi ®©y"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "Card IRQ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Card mem (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "Card IO"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "Card IO_0"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "Card IO_1"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Sè ®iÖn tho¹i c¸ nh©n cña b¹n"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "Tªn nhµ cung cÊp (VD: provider.net)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Sè ®iÖn tho¹i cña nhµ cung cÊp"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "Tªn miÒn thø nhÊt cña nhµ cung cÊp"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "Tªn miÒn thø hai cña nhµ cung cÊp"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "Chän quèc gia cña b¹n"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "ChÕ ®é quay sè"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Tèc ®é kÕt nèi"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "HÕt thêi gian kÕt nèi (theo gi©y):"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Account ®¨ng nhËp (tªn ng­êi dïng)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "MËt khÈu account"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Ph©n vïng më réng kh«ng ®­îc hç trî trªn nÒn t¶ng nµy"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Cã mét lç trèng trong b¶ng ph©n vïng cña b¹n nh­ng ch­¬ng tr×nh kh«ng\n"
-"sö dông ®­îc. ChØ cã gi¶i ph¸p lµ chuyÓn c¸c ph©n vïng ®Çu tiªn ®Ó cã lç "
-"trèng tiÕp theo cho c¸c ph©n vïng më réng"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Kh«i phôc tõ tËp tin %s kh«ng ®­îc: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "TËp tin sao l­u háng"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Lçi ghi vµo tËp tin %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"X¶y ra vÊn ®Ò háng hãc g× ®ã trªn ®Üa cña b¹n. \n"
-"ViÖc kiÓm tra tÝnh toµn vÑn cña d÷ liÖu kh«ng thùc hiÖn ®­îc. \n"
-"§iÒu nµy cã nghÜa lµ viÖc ghi bÊt kú c¸i g× lªn ®Üa sÏ kh«ng chuÈn"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ph¶i cã"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "quan träng"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "rÊt tuyÖt"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "tuyÖt"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "cã thÓ lµ"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - HÖ thèng in Ên Unix th«ng dông"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "ThÕ hÖ LPRng - LPR míi"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Daemon in Ên theo tuyÕn"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - In, kh«ng xÕp hµng"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "M¸y in côc bé"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "M¸y in ë xa"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "M¸y in cña m¸y chñ CUPS ë xa"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "M¸y in cña m¸y chñ LPD ë xa"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "M¸y in m¹ng (socket)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "M¸y in cña m¸y chñ SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "M¸y in cña m¸y chñ NetWare"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "H·y nhËp thiÕt bÞ in URI"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "Pipe (®Æt èng dÉn) vµo trong lÖnh"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "KiÓu kh«ng x¸c ®Þnh"
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(trªn %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "(trªn m¸y tÝnh nµy)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Chän KÕt Nèi M¸y In"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "M¸y in ®­îc kÕt nèi nh­ thÕ nµo?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"Víi m¸y chñ CUPS ë xa, b¹n kh«ng ph¶i cÊu h×nh bÊt kú\n"
-"m¸y in nµo ë ®©y; c¸c m¸y in sÏ ®­îc ph¸t hiÖn tù ®éng.\n"
-"Tr­êng hîp nµy, chän \"M¸y in cña m¸y chñ CUPS ë xa\"."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-#, fuzzy
-msgid "None"
-msgstr "Hoµn thµnh"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-#, fuzzy
-msgid "Choose a default printer!"
-msgstr "Chän ng­êi dïng mÆc ®Þnh:"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-"Víi mét m¸y chñ CUPS ë xa, ë ®©y b¹n kh«ng ph¶i cÊu h×nh bÊt\n"
-"kú m¸y in nµo. C¸c m¸y chñ CUPS sÏ tù ®éng th«ng b¸o cho m¸y\n"
-"cña b¹n vÒ m¸y in cña chóng. Mäi m¸y in ®­îc m¸y cña b¹n x¸c\n"
-"®Þnh, hiÖn thêi ®­îc liÖt kª trong tr­êng \"M¸y in mÆc ®Þnh\". H·y\n"
-"chän m¸y in mÆc ®Þnh ë ®ã cho m¸y tÝnh cña b¹n vµ nhÊn nót\n"
-"\"¸p dông/§äc - l¹i c¸c m¸y in\" . NhÊn vµo cïng nót ®ã ®Ó n¹p l¹i\n"
-"danh s¸ch (nã mÊt kho¶ng 30 gi©y sau khi khëi ch¹y\n"
-"CUPS cho tíi khi mäi m¸y in ë xa ®­îc nh×n thÊy).\n"
-"Khi m¸y chñ CUPS thuéc mét m¹ng lµm viÖc kh¸c, b¹n ph¶i cung\n"
-"cÊp ®Þa chØ IP cña m¸y chñ CUPS vµ tïy chän sè hiÖu cæng kÕt nèi\n"
-"®Ó nhËn ®­îc th«ng tin cña m¸y in tõ m¸y chñ, nÕu kh«ng th× b¹n h·y\n"
-"bá trèng c¸c tr­êng nµy."
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Th«ng th­êng, CUPS ®­îc cÊu h×nh tù ®éng theo m«i tr­êng\n"
-"m¹ng lµm viÖc, v× vËy b¹n cã thÓ truy cËp tíi m¸y in cña m¸y chñ\n"
-"CUPS trong m¹ng lµm viÖc côc bé. NÕu cÊu h×nh nµy kh«ng ®óng,\n"
-"h·y t¾t \"CÊu h×nh CUPS tù ®éng\" vµ tù thùc hiÖn so¹n th¶o tËp\n"
-"tin /etc/cups/cupsd.conf . Sau ®ã, xin ®õng quªn khëi ®éng l¹i\n"
-"CUPS (víi lÖnh: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "§ãng"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "G¾n/§äc l¹i c¸c m¸y in"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "§Þa chØ IP ph¶i cã d¹ng 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "Sè hiÖu cæng nªn lµ mét sè nguyªn !"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "M¸y in mÆc ®Þnh"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "IP cña m¸y chñ CUPS"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Cæng"
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr "CÊu h×nh CUPS tù ®éng"
-
-#: ../../printerdrake.pm_.c:217
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "§ang dß t×m thiÕt bÞ..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "KiÓm tra c¸c cæng"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "M¸y in kiÓu \"%s\", ®­îc ph¸t hiÖn t¹i"
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "ThiÕt bÞ in côc bé"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"M¸y in cña b¹n ®­îc nèi víi thiÕt bÞ nµo?\n"
-"(l­u ý lµ  /dev/lp0 t­¬ng ®­¬ng víi LPT1:)\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "ThiÕt bÞ m¸y in"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "ThiÕu tªn ThiÕt bÞ/TËp tin!"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "§ang ®äc d÷ liÖu m¸y in..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "C¸c tïy chän m¸y in LPD ë xa"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"§Ó sö dông m¸y in lpd ë xa, b¹n cÇn cung cÊp tªn\n"
-"chñ cña m¸y chñ in Ên vµ tªn m¸y in cña m¸y chñ\n"
-"®ã."
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "Tªn m¸y chñ ë xa"
-
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "Tªn m¸y in ë xa"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "ThiÕu tªn m¸y chñ ë xa!"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "ThiÕu tªn m¸y in ë xa !"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Tïy chän m¸y in SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"§Ó in b»ng m¸y in SMB, b¹n cÇn cung cÊp tªn m¸y \n"
-"chñ SMB (L­u ý! Tªn nµy cã thÓ kh¸c víi tªn m¸y chñ\n"
-"TCP/IP cña nã!) ®Þa chØ IP cña m¸y chñ in Ên, còng nh­\n"
-"lµ tªn chia sÎ cho m¸y in b¹n muèn truy cËp vµ th«ng tin \n"
-"tªn ng­êi dïng phï hîp nµo ®ã, mËt khÈu, nhãm lµm viÖc."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "M¸y chñ SMB"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "IP cña m¸y chñ SMB"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "Tªn chia sÎ"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Nhãm lµm viÖc"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Ph¶i cã tªn hoÆc IP cña m¸y chñ!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "ThiÕu tªn chia xÎ SAMBA!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "C¸c tïy chän m¸y in NetWare"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"§Ó in b»ng m¸y in NetWare, b¹n cÇn cung cÊp tªn m¸y\n"
-"chñ in Ên NetWare (L­u ý! Tªn nµy cã thÓ kh¸c víi tªn m¸y chñ\n"
-"TCP/IP cña nã!), tªn hµng in cho m¸y in mµ b¹n muèn truy cËp\n"
-"vµ tªn ng­êi dïng, mËt khÈu phï hîp."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "M¸y chñ in Ên"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "Tªn hµng in"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "ThiÕu tªn m¸y chñ NCP!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "ThiÕu tªn hµng in NCP!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Tïy chän m¸y in socket"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"§Ó in b»ng m¸y in socket, b¹n cÇn cung cÊp tªn m¸y\n"
-"chñ cña m¸y in vµ sè cæng t­¬ng øng vµ sè hiÖu cæng.\n"
-"Trªn c¸c m¸y chñ HP JetDirect, sè cæng th­êng lµ 9100,\n"
-"vµ thay ®æi trªn c¸c m¸y kh¸c. H·y xem tµi liÖu ®i kÌm\n"
-"phÇn cøng."
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "Tªn m¸y chñ in Ên"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "ThiÕu tªn m¸y chñ in Ên!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "ThiÕt bÞ in URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"B¹n cã thÓ trùc tiÕp chØ ®Þnh URI ®Ó truy cËp m¸y in. URI ph¶i ®¸p øng ®­îc "
-"CUPS hay c¸c ®Æc t¶ Foomatic. L­u ý lµ kh«ng ph¶i mäi lo¹i URI ®Òu ®­îc tÊt "
-"c¶ c¸c spooler hç trî."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "CÇn nhËp mét URI hîp lÖ!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Mäi m¸y in cÇn ®­îc ®Æt tªn (vÝ dô: lp).\n"
-"Tr­êng M« t¶ vµ VÞ trÝ kh«ng nhÊt thiÕt ph¶i\n"
-"®iÒn vµo. Chóng lµ c¸c chó thÝch cho ng­êi dïng."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "Tªn m¸y in"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "M« t¶"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "VÞ trÝ"
-
-#: ../../printerdrake.pm_.c:701
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "§ang ®äc d÷ liÖu m¸y in..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "Lùa chän lo¹i m¸y in"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "B¹n cã lo¹i m¸y in nµo?"
-
-#: ../../printerdrake.pm_.c:866
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Thay ®æi cÊu h×nh m¸y in"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "CÊu h×nh Internet"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"C¸c thiÕt lËp m¸y in mÆc ®Þnh\n"
-"B¹n nªn b¶o ®¶m lµ khæ giÊy in vµ lo¹i\n"
-"mùc in (nÕu cã) ®­îc thiÕt lËp ®óng. L­u ý\n"
-"lµ víi mét chÊt l­îng in ra cao th× vÒ c¬ b¶n,\n"
-"qu¸ tr×nh in Ên sÏ bÞ chËm ®i."
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Tïy chän %s ph¶i lµ mét sè nguyªn!"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Tïy chän %s ph¶i lµ mét sè !"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Tïy chän %s kh«ng cã trong danh môc!"
-
-#: ../../printerdrake.pm_.c:1136
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"B¹n cã muèn thiÕt lËp m¸y in (\"%s\") nµy\n"
-"lµ m¸y in mÆc ®Þnh?"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "Trang in thö"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"H·y lùa chän c¸c trang in thö mµ b¹n muèn thùc hiÖn.\n"
-"L­u ý: trang ¶nh in thö cã thÓ tèn kh¸ nhiÒu thêi gian ®Ó cho ra kÕt\n"
-"qu¶ vµ trªn c¸c m¸y in laser cã bé nhí qu¸ Ýt th× cã thÓ kh«ng in ra ®­îc.\n"
-"§a sè c¸c tr­êng hîp, nã cã ®ñ kh¶ n¨ng ®Ó in mét trang in thö chuÈn."
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "Kh«ng cã trang in thö"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "In"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "Trang in thö chuÈn"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr "Trang in thö thay thÕ (Letter)"
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr "Trang in thö thay thÕ (A4)"
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "Trang ¶nh in thö"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "§ang in thö trang..."
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Trang in thö ®· ®­îc göi tíi m¸y in.\n"
-"ViÖc nµy cÇn chót thêi gian tr­íc khi m¸y in khëi ch¹y.\n"
-"T×nh tr¹ng in:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Trang in thö ®· ®­îc göi tíi m¸y in.\n"
-"CÇn chót thêi gian tr­íc khi m¸y in lµm viÖc.\n"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "Trang in thö cã tèt kh«ng?"
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-#, fuzzy
-msgid "Raw printer"
-msgstr "Kh«ng cã m¸y in"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "T¾t chøc n¨ng m¹ng"
-
-#: ../../printerdrake.pm_.c:1294
-#, fuzzy
-msgid "Print option list"
-msgstr "C¸c tïy chän m¸y in"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "§ang ®äc d÷ liÖu m¸y in..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "ChuyÓn t¶i cÊu h×nh m¸y in"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-"B¹n cã thÓ copy cÊu h×nh m¸y in mµ b¹n ®· hoµn thµnh\n"
-"cho spooler %s ®Õn %s, lµ spooler hiÖn thêi cña b¹n. Mäi\n"
-"d÷ liÖu vÒ cÊu h×nh (tªn m¸y in, m« t¶, vÞ trÝ, lo¹i kÕt nèi,\n"
-"vµ c¸c thiÕt lËp tïy chän mÆc ®Þnh) ®­îc b¾t kÞp, nh­ng c¸c\n"
-"c«ng viÖc in Ên sÏ kh«ng ®­îc truyÒn t¶i. Kh«ng ph¶i toµn\n"
-"bé c¸c hµng ®îi in cã thÓ ®­îc truyÒn t¶i do nh÷ng nguyªn\n"
-"nh©n sau ®©y:\n"
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-"CUPS kh«ng hç trî c¸c m¸y in cña c¸c m¸y chñ Novell hoÆc\n"
-"c¸c m¸y in göi d÷ liÖu vµo mét lÖnh cã khu«n thøc tù do.\n"
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-"PDQ chØ hç trî c¸c m¸y in côc bé, c¸c m¸y in LPD ë xa, vµ\n"
-"c¸c m¸y in Socket/TCP.\n"
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD vµ LPRng kh«ng hç trî m¸y in IPP.\n"
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-"H¬n n÷a, c¸c hµng ®îi in kh«ng ®­îc t¹o víi ch­¬ng tr×nh\n"
-"nµy hoÆc \"foomatic-configure\" kh«ng thÓ ®­îc truyÒn t¶i."
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-"\n"
-"Còng nh­ vËy, c¸c m¸y in ®· ®­îc cÊu h×nh víi c¸c file PPD\n"
-"do nhµ chÕ t¹o cung cÊp hoÆc víi c¸c driver CUPS ®Þa ph­¬ng\n"
-"cã thÓ kh«ng ®­îc truyÒn t¶i."
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"§¸nh dÊu vµo m¸y in mµ b¹n muèn göi tíi vµ nhÊn lªn \n"
-"\"TruyÒn\"."
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "Kh«ng truyÒn tíi m¸y in"
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "TruyÒn"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"M¸y in cã tªn \"%s\" ®· tån t¹i bªn d­íi %s råi. \n"
-"NhÊn \"TruyÒn\" ®Ó ghi ®Ì lªn nã.\n"
-"B¹n còng cã thÓ gâ tªn míi hay bá qua m¸y in nµy."
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Tªn m¸y in chØ nªn dïng c¸c ch÷, sè vµ dÊu g¹ch ngang thÊp"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"M¸y in \"%s\" ®ang tån t¹i,\n"
-"b¹n thùc sù muèn ghi ®Ì lªn cÊu h×nh cña nã?"
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "Tªn m¸y in míi"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "§ang truyÒn %s ..."
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-"B¹n ®· hoµn thµnh viÖc truyÒn biÓu mÉu m¸y in mÆc ®Þnh (\"%s\").\n"
-"B¹n cã muèn dïng nã còng lµ m¸y in mÆc ®Þnh\n"
-"trong hÖ thèng in Ên %s míi?"
-
-#: ../../printerdrake.pm_.c:1423
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "§ang ®äc d÷ liÖu m¸y in..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "CÊu h×nh Lilo/Grub"
-
-#: ../../printerdrake.pm_.c:1432
-#, fuzzy
-msgid "Starting network ..."
-msgstr "§ang khëi ®éng kÕt nèi..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-#, fuzzy
-msgid "Configure the network now"
-msgstr "CÊu h×nh m¹ng lµm viÖc"
-
-#: ../../printerdrake.pm_.c:1455
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Mµn h×nh ch­a ®­îc cÊu h×nh"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1463
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "§ang cÊu h×nh m¹ng"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1516
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "B¹n muèn sö dông hÖ thèng in Ên nµo?"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "high"
-msgstr "Cao"
-
-#: ../../printerdrake.pm_.c:1548
-#, fuzzy
-msgid "paranoid"
-msgstr "Hoang t­ëng"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "B¹n muèn sö dông hÖ thèng in Ên nµo?"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "§ang kiÓm tra phÇn mÒm ®· cµi ®Æt..."
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "§ang gì bá LPRng..."
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "§ang gì bá LPD..."
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Chän Spooler M¸y In"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "B¹n muèn sö dông hÖ thèng in Ên (spooler) nµo?"
-
-#: ../../printerdrake.pm_.c:1759
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "CÊu h×nh m¸y in"
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "C¸c tïy chän m¸y in"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "§ang ®äc d÷ liÖu m¸y in..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "B¹n cã muèn cÊu h×nh in Ên kh«ng?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr "HÖ thèng in Ên: "
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "ChÕ ®é b×nh th­êng"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (MÆc ®Þnh)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "M¸y in cña m¸y chñ CUPS ë xa"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Printer(s) on remote server(s)"
-msgstr "M¸y in cña m¸y chñ CUPS ë xa"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Thªm m¸y in"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "B¹n cã muèn ch¹y thö cÊu h×nh nµy?"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "Thay ®æi cÊu h×nh m¸y in"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"M¸y in %s: %s %s\n"
-"B¹n muèn thay ®æi g× trªn m¸y in nµy?"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "H·y thùc hiÖn!"
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "KiÓu kÕt nèi m¸y in"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "Tªn, m« t¶, vÞ trÝ cña m¸y in"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "H·ng s¶n xuÊt, kiÓu, driver cña m¸y in"
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "H·ng s¶n xuÊt, kiÓu cña m¸y in"
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr "ThiÕt lËp m¸y in nµy lµm mÆc ®Þnh"
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "Trang in thö "
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "Bá m¸y in"
-
-#: ../../printerdrake.pm_.c:2071
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "§ang ®äc d÷ liÖu m¸y in..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "B©y giê, m¸y in \"%s\" ®­îc thiÕt lËp lµm mÆc ®Þnh."
-
-#: ../../printerdrake.pm_.c:2103
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "B¹n thùc sù muèn bá m¸y in \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2105
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "§ang ®äc d÷ liÖu m¸y in..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "CÊu h×nh Proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Chµo mõng tiÖn Ých cÊu h×nh proxy.\n"
-"\n"
-"T¹i ®©y, b¹n cã thÓ thiÕt lËp c¸c proxy cho http vµ ftp\n"
-"cã hay kh«ng ®ßi hái ®¨ng nhËp vµ mËt khÈu\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"H·y ®iÒn c¸c th«ng tin vÒ proxy cho http\n"
-"H·y ®Ó trèng nÕu kh«ng thiÕt lËp proxy http"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "cæng"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URL nªn b¾t ®Çu b»ng 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr " Bé phËn cæng nªn lµ ch÷ sè"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"H·y ®iÒn c¸c th«ng tin cho proxy ftp\n"
-"H·y ®Ó trèng nÕu kh«ng thiÕt lËp proxy ftp"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL nªn b¾t ®Çu b»ng 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"H·y nhËp vµo phÇn ®¨ng nhËp vµ mËt khÈu, nÕu cã.\n"
-"H·y ®Ó trèng nÕu kh«ng muèn ®¨ng nhËp/mËt khÈu"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "®¨ng nhËp"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "mËt khÈu"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "gâ l¹i mËt khÈu"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "MËt khÈu kh«ng ®óng. H·y gâ l¹i!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kh«ng thÓ thªm mét ph©n vïng cho _formatted_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Kh«ng thÓ ghi tËp tin %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid háng"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid háng (ph¶i ch¨ng do thiÕu raidtools ?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Kh«ng ®ñ c¸c ph©n vïng cho møc ®é RAID %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Ch¹y hÖ thèng ©m thanh ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron mét lÞch tr×nh lÖnh ®Þnh kú"
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd ®­îc dïng ®Ó theo dâi t×nh tr¹ng pin vµ ghi nã qua  syslog.\n"
-"Nã còng ®­îc dïng ®Ó t¾t m¸y tÝnh khi pin yÕu."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Ch¹y c¸c lÖnh trong lÞch tr×nh theo thêi gian Ên ®Þnh,\n"
-"vµ ch¹y c¸c lo¹t lÖnh (batch commands) khi t¶i trung b×nh ®ñ thÊp."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron lµ mét ch­¬ng tr×nh UNIX chuÈn ®Ó ch¹y c¸c ch­¬ng tr×nh do ng­êi\n"
-"dïng chØ ®Þnh trong lÞch tr×nh. vixie cron ®­a c¸c sè tÝnh n¨ng vµo cron "
-"UNIX c¬\n"
-"së, bao gåm c¸c tÝnh n¨ng b¶o mËt tèt h¬n vµ c¸c tïy chän cÊu h×nh m¹nh h¬n."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ®­a hç trî chuét vµo c¸c øng dông Linux dùa trªn v¨n b¶n nh­ lµ\n"
-"Midnight Commander. Nã còng cho phÐp tÝnh n¨ng c¾t-vµ-d¸n b»ng chuét trong,\n"
-"console vµ hç trî cho c¸c menu bËt lªn trong console."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake sÏ ch¹y ®Ó kh¶o s¸t c¸c phÇn cøng, vµ tïy ý cÊu h×nh c¸c\n"
-"phÇn cøng míi/thay ®æi."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache lµ mét ch­¬ng tr×nh m¸y chñ World Wide Web. Nã dïng ®Ó\n"
-"phôc vô c¸c tËp tin HTML vµ CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Daemon siªu m¸y chñ internet (th­êng gäi lµ inetd) ®Ó ch¹y c¸c\n"
-"dÞch vô internet kh¸c khi cÇn. Nã chÞu tr¸ch nhiÖm cho nhiÒu\n"
-"dÞch vô, bao gåm telnet, ftp, rsh, vµ rlogin. Khi t¾t inetd th× nã\n"
-"sÏ t¾t mäi dÞch vô mµ nã ®¶m nhiÖm."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"B¾t ®Çu läc c¸c gãi cho chuçi nh©n 2.2, ®Ó cµi ®Æt\n"
-"bøc t­êng löa ®Ó b¶o vÖ m¸y tÝnh cña b¹n khái c¸c cuéc tÊn c«ng tõ network."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Gãi nµy ®Ó n¹p ¸nh x¹ bµn phÝm ®· chän ®­îc thiÕt lËp\n"
-"trong /etc/sysconfig/keyboard. Dïng chän lùa nµy b»ng tiÖn Ých kbdconfig.\n"
-"B¹n nªn ®Ó nã ho¹t ®éng cho hÇu hÕt c¸c m¸y tÝnh."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Sù tù ®éng t¸i-sinh thµnh cña header nh©n trªn /boot cho\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Tù ®éng dß t×m vµ cÊu h×nh phÇn cøng khi boot"
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf thØng tho¶ng sÏ s¾p xÕp l¹i ®Ó thùc hiÖn nhiÒu t¸c vô\n"
-"vµo thêi gian boot ®Ó duy tr× cÊu h×nh hÖ thèng."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd lµ mét daemon in Ên gióp cho lpr ho¹t ®éng tèt. VÒ c¬\n"
-"b¶n, nã còng lµ mét server xö lý c¸c ho¹t ®éng in Ên cña m¸y in."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"M¸y chñ ¶o Linux , ®­îc dïng ®Ó x©y dùng c¸c m¸y chñ cã ®é sö dông cao vµ\n"
-"tho¶ m·n c¸c yªu cÇu cao."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"Tªn BIND lµ mét m¸y chñ phô tr¸ch tªn miÒn (DNS), nã xö lý viÖc\n"
-"chuyÓn tªn c¸c m¸y chñ thµnh c¸c ®Þa chØ IP."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"G¾n kÕt vµ bá g¾n kÕt mäi ®iÓm g¾n kÕt cña hÖ thèng tËp tin\n"
-"m¹ng (NFS), SMB (tr×nh qu¶n trÞ LAN/Windows), NCP (NetWare)."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"KÝch ho¹t/BÊt ho¹t mäi giao diÖn m¹ng ®· thiÕt lËp khi\n"
-"khëi ®éng."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS lµ mét giao thøc phæ biÕn ®Ó chia sÎ tËp tin qua m¹ng TCP/IP.\n"
-"DÞch vô nµy cho phÐp m¸y chñ NFS ho¹t ®éng, nã ®­îc cÊu h×nh trong\n"
-"tÖp /etc/exports."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS lµ mét giao thøc phæ biÕn ®Ó chia sÎ tËp tin qua m¹ng\n"
-"TCP/IP. DÞch vô nµy cho phÐp khãa chøc n¨ng cña tËp tin NFS ."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Tù ®éng bËt kho¸ numlock d­íi console\n"
-"vµ  XFree khi boot."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Hç trî OKI 4w vµ c¸c c¸c m¸y in t­¬ng thÝch Windows."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Hç trî PCMCIA th­êng dïng cho c¸c thiÕt bÞ nh­ lµ ethernet vµ\n"
-"modem cña m¸y x¸ch tay. Nã kh«ng ho¹t ®éng nÕu ch­a cÊu h×nh.V×\n"
-"vËy, cµi ®Æt nã kh«ng ¶nh h­ëng g× vÒ  mÆt an toµn nÕu kh«ng dïng nã."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"B¶ng ¸nh x¹ cæng (portmapper) qu¶n lý kÕt nèi RPC sö dông c¸c giao\n"
-"thøc nh­ lµ NFS vµ NIS. M¸y chñ ¸nh x¹ cæng ph¶i ch¹y trªn c¸c m¸y tÝnh\n"
-"cã chøc n¨ng m¸y chñ dïng c¸c giao thøc theo c¬ chÕ RPC."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix lµ ch­¬ng tr×nh vËn chuyÓn th­, nã chuyÓn th­ tõ\n"
-"m¸y tÝnh nµy sang m¸y tÝnh kh¸c."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"L­u vµ kh«i phôc entropy pool cña hÖ thèng ®Ó cho ho¹t ®éng\n"
-"sinh sè ngÉu nhiªn cã chÊt l­îng cao."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"ChØ ®Þnh thiÕt bÞ raw dÓ  ng¨n chÆn c¸c thiÕt bÞ kh¸c(vÝ dô nh­ ph©n vïng "
-"®Üa cøng)\n"
-", ®Ó sö dông c¸c phÇn mÒm nh­ Oracle"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Daemon ®Þnh tuyÕn cho phÐp b¶ng ®Þnh tuyÕn IP tù ®éng ®­îc cËp nhËt\n"
-"b»ng giao thøc RIP. Khi RIP ®ang ®­îc dïng rçng r·i ë c¸c m¹ng nhá, sÏ cÇn\n"
-"thªm c¸c giao thøc ®Þnh tuyÕn phøc t¹p cho c¸c m¹ng phøc t¹p."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Giao thøc RSTAT cho phÐp ng­êi dïng trªn m¹ng gäi c¸c\n"
-"thùc thi metric cho bÊt kú m¸y nµo trªn m¹ng ®ã."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Giao thøc RUSERS cho phÐp ng­êi dïng trªn m¹ng nhËn ra ai\n"
-"®¨ng nhËp vµo t¹i c¸c m¸y ®ang ®¸p øng kh¸c."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Giao thøc RWHO cho phÐp ng­êi dïng tõ xa cã danh s¸ch toµn bé ng­êi\n"
-"dïng ®¨ng nhËp vµo mét m¸y ®ang ch¹y daemon rwho (t­¬ng tù finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Ch¹y hÖ thèng ©m thanh trªn m¸y tÝnh cña b¹n"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog lµ ph­¬ng tiÖn thuËn lîi mµ nhiÒu daemons dïng ®Ó ghi c¸c\n"
-"th«ng ®iÖp vµo c¸c tËp tin log hÖ thèng. Nªn ch¹y syslog th­êng xuyªn."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "T¶i c¸c drivers cho thiÕt bÞ usb cña b¹n."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Khëi ®éng X Font Server (nhÊt thiÕt ph¶i cã ®Ó ch¹y XFree)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "H·y chän dÞch vô nµo ®­îc phÐp khëi ®éng tù ®éng lóc khëi ®éng m¸y"
-
-#: ../../services.pm_.c:126
-#, fuzzy
-msgid "Printing"
-msgstr "In"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:132
-#, fuzzy
-msgid "System"
-msgstr "ChÕ ®é hÖ thèng"
-
-#: ../../services.pm_.c:137
-#, fuzzy
-msgid "Remote Administration"
-msgstr "C¸c tïy chän m¸y in LPD ë xa"
-
-#: ../../services.pm_.c:145
-#, fuzzy
-msgid "Database Server"
-msgstr "C¬ së d÷ liÖu"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "DÞch vô"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "®ang ch¹y"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "®· dõng"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "C¸c dÞch vô vµ deamon"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Xin lçi, kh«ng cã th«ng tin\n"
-"thªm vÒ dÞch vô nµy."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "§ang khëi ®éng"
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "§ang cµi ®Æt gãi %s"
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Kh«ng thÓ ®äc ®­îc b¶ng ph©n vïng, nã bÞ háng nÆng :(\n"
-"SÏ cè v­ît qua c¸c ph©n vïng trèng bÞ háng"
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "Lçi!"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Kh«ng thÓ t×m thÊy tËp tin ¶nh cÇn dïng `%s'."
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "CÊu h×nh cµi ®Æt tù ®éng"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"B¹n s¾p cÊu h×nh mét ®Üa mÒm cµi ®Æt tù ®éng. TÝnh n¨ng nµy cã phÇn nguy "
-"hiÓm vµ ph¶i ®­îc sö dông mét c¸ch thËn träng.\n"
-"\n"
-"Víi tÝnh n¨ng ®ã, b¹n sÏ cã kh¶ n¨ng diÔn l¹i qu¸ tr×nh cµi ®Æt mµ b¹n ®· "
-"thùc hiÖn trªn m¸y nµy, ®­îc nh¾c theo kiÓu t­¬ng t¸c cho mét sè b­íc, ®Ó "
-"thay ®æi c¸c gi¸ trÞ cña chóng.\n"
-"\n"
-"§Ó cã sù an toµn tèi ®a, viÖc ph©n vïng vµ format ®Üa sÏ kh«ng bao giê ®­îc "
-"thùc hiÖn tù ®éng theo nh÷ng g× mµ b¹n ®· chän khi cµi ®Æt trªn m¸y nµy.\n"
-"\n"
-"B¹n cã muèn tiÕp tôc?"
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "CÊu h×nh c¸c b­íc tù ®éng"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"H·y thùc hiÖn chän cho tõng b­íc: nã sÏ diÔn l¹i gièng nh­ b¹n ®· cµi ®Æt "
-"hay lµ sÏ ®­îc thao t¸c b»ng tay"
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Chóc mõng!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"§Üa mÒm tù ®éng cµi ®Æt ®· ®­îc t¹o ra.\n"
-"B¹n cã thÓ diÔn l¹i qu¸ tr×nh cµi ®Æt ®· thùc hiÖn."
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Chia SÎ KÕt Nèi Internet"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "HiÖn t¹i chia sÎ kÕt nèi Internet ®ang ho¹t ®éng"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"ThiÕt lËp chia sÎ kÕt nèi internet ®· ®­îc hoµn thµnh.\n"
-"HiÖn thêi nã ®ang ho¹t ®éng.\n"
-"\n"
-"B¹n muèn lµm g×?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "T¾t"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "g¹t bá"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "cÊu h×nh l¹i"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "®ang t¾t c¸c server..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "B©y giê chia sÎ kÕt nèi internet ®· t¾t."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "HiÖn thêi chia sÎ kÕt nèi internet kh«ng ®­îc bËt"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"ThiÕt lËp chia sÎ kÕt nèi internet ®· hoµn thµnh.\n"
-"HiÖn t¹i kh«ng ho¹t ®éng.\n"
-"\n"
-"B¹n muèn lµm g×?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "cho ho¹t ®éng"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "®ang cho c¸c server ho¹t ®éng..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "B©y giê chia sÎ kÕt nèi internet cã thÓ ho¹t ®éng."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"B¹n s¾p cÊu h×nh cho m¸y tÝnh chia sÎ kÕt nèi Internet cña nã.\n"
-"Víi tÝnh n¨ng ®ã, c¸c m¸y kh¸c trong m¹ng côc bé cã thÓ sö dông kÕt nèi "
-"Internet cña m¸y tÝnh nµy.\n"
-"\n"
-"L­u ý: b¹n cÇn mét Adapter m¹ng dµnh cho viÖc thiÕt lËp mét m¹ng côc bé "
-"(LAN)."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Giao diÖn %s (®ang dïng module %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Giao diÖn %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Kh«ng cã adapter m¹ng trong hÖ thèng cña b¹n!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Kh«ng cã adapter m¹ng ethernet ®­îc t×m thÊy trong hÖ thèng. H·y ch¹y c«ng "
-"cô cÊu h×nh phÇn cøng."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Giao diÖn m¹ng"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"ChØ cã mét adapter m¹ng ®­îc cÊu h×nh trong hÖ thèng cña b¹n:\n"
-"\n"
-"%s\n"
-"\n"
-"ChuÈn bÞ thiÕt lËp m¹ng côc bé cña b¹n víi adapter ®ã."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "H·y chän adapter m¹ng nµo sÏ ®­îc kÕt nèi vµo m¹ng côc bé cña b¹n. "
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr "C¶nh b¸o, adapter m¹ng ®· ®­îc cÊu h×nh råi. T«i sÏ cÊu h×nh l¹i nã."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Kh¶ n¨ng xung ®ét ®Þa chØ LAN ®­îc t×m ra trong cÊu h×nh hiÖn thêi cña %s!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Ph¸t hiÖn ra cÊu h×nh t­êng löa!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"C¶nh b¸o! CÊu h×nh t­êng löa hiÖn thêi ®­îc ph¸t hiÖn. Cã thÓ b¹n cÇn Ên "
-"®Þnh thªm mét sè chi tiÕt sau khi cµi ®Æt."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "§ang cÊu h×nh..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "§ang cÊu h×nh c¸c script, cµi ®Æt phÇn mÒm, khëi ®éng c¸c server..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "C¸c trôc trÆc cµi ®Æt gãi %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Mäi thø ®· ®­îc cÊu h×nh.\n"
-"B©y giê b¹n cã thÓ chia sÎ kÕt nèi Internet víi c¸c m¸y tÝnh kh¸c trong m¹ng "
-"côc bé cña b¹n, sö dông cÊu h×nh m¹ng tù ®éng (DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "§· hoµn thµnh xong cµi ®Æt, nh­ng hiÖn t¹i nã kh«ng ®­îc ho¹t ®éng."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "§· hoµn thµnh xong cµi ®Æt, vµ hiÖn thêi nã ®­îc ho¹t ®éng."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Ch­a cã mét chia sÎ kÕt nèi Internet nµo ®­îc cÊu h×nh."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "CÊu h×nh chia sÎ kÕt nèi Internet"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Chµo mõng tiÖn Ých Chia SÎ KÕt Nèi Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"NhÊn  lªn CÊu h×nh ®Ó ch¹y ®å thuËt cho thiÕt lËp."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "CÊu h×nh m¹ng (%d adapter)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Lý lÞch: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Xo¸ lý lÞch..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Lý lÞch ®Ó xãa:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Lý lÞch míi..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Tªn lý lÞch ®Ó t¹o ra (lý lÞch míi ®­îc t¹o ra gièng nh­ mét b¶n copy cña lý "
-"lÞch hiÖn thêi) :"
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Tªn m¸y chñ:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Truy cËp Internet"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "KiÓu:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Cæng kÕt nèi:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Giao diÖn :"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "T×nh tr¹ng:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "§· kÕt nèi"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Ch­a kÕt nèi"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "KÕt nèi..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Ng¾t kÕt nèi..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "§ang khëi ®éng kÕt nèi..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "§ang ®ãng kÕt nèi..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"KÕt nèi ch­a ®­îc ®ãng.\n"
-"Thö ®ãng b»ng c¸ch ch¹y\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"trong root."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "HÖ thèng b©y giê ®É ®­îc ng¾t kÕt nèi"
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "CÊu h×nh truy cËp Internet..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "CÊu h×nh LAN"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Giao diÖn"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Giao thøc"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "T×nh tr¹ng"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "CÊu h×nh m¹ng côc bé..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "¸p dông"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "H·y chê...®ang ¸p dông cÊu h×nh"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"B¹n kh«ng cã giao diÖn nµo ®· ®­îc ®Þnh cÊu h×nh.\n"
-"CÊu h×nh chóng b»ng c¸ch nhÊn vµo 'Configure'"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "CÊu h×nh LAN"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Giao thøc khëi ®éng"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "§­îc n¹p khi khëi ®éng "
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP client"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "KÝch ho¹t b©y giê"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "BÊt ho¹t b©y giê"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"B¹n ch­a cã mét kÕt nªt internet nµo.\n"
-"T¹o mét c¸i tr­íc b»ng c¸ch nhÊn vµo 'Configure'"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "CÊu h×nh kÕt nèi Internet"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "CÊu H×nh KÕt Nèi Internet"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "KiÓu kÕt nèi:"
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "C¸c th«ng sè"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Card Ethernet"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP Client"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Chµo mõng c¸c Cracker"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Téi nghiÖp"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Hoang t­ëng"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Møc ®é nµy ®­îc dïng víi sù l­u t©m. Nã lµm hÖ thèng dÔ sö dông h¬n,\n"
-"nh­ng dÔ bÞ tæn th­¬ng: kh«ng ®­îc dïng cho m¸y tÝnh nèi m¹ng hoÆc nèi\n"
-"víi Internet. Kh«ng cã truy cËp mËt khÈu."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"B©y giê cho phÐp mËt khÈu, nh­ng sö dông cho mét m¸y nèi m¹ng th× vÉn kh«ng "
-"nªn."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Mét Ýt c¶i thiÖn cho møc ®é b¶o mËt, chñ yÕu cã thªm kiÓm tra vµ\n"
-"c¸c c¶nh b¸o b¶o mËt."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"§©y lµ møc b¶o mËt chuÈn ®­îc khuyÕn c¸o cho c¸c m¸y tÝnh sÏ ®­îc nèi\n"
-"víi Internet theo kiÓu m¸y kh¸ch. B©y giê thùc hiÖn kiÓm tra b¶o mËt. "
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Víi møc b¶o mËt nµy, cã thÓ sö dông hÖ thèng nµy lµm m¸y chñ. Møc\n"
-"®é b¶o mËt b©y giê ®ñ cao ®Ó sö dông hÖ thèng lµm m¸y chñ, cho phÐp\n"
-"c¸c m¸y kh¸ch kÕt nèi vµo. "
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"§Æt b¶o mËt møc 4, nh­ng b©y giê hÖ thèng ®­îc ®ãng hoµn toµn.\n"
-"C¸c tÝnh n¨ng b¶o mËt ®ang ë møc tèi ®a."
-
-#: ../../standalone/draksec_.c:65
-#, fuzzy
-msgid "Security level"
-msgstr "ThiÕt lËp møc b¶o mËt"
-
-#: ../../standalone/draksec_.c:67
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Chän tïy biÕn cho server"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "ThiÕt lËp møc b¶o mËt"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Trung t©m ®iÒu khiÓn"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Chän c«ng cô b¹n muèn dïng"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "c¸ch dïng: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "B¹n cã muèn phÝm BackSpace trë thµnh phÝm Delete trong console kh«ng?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Thay ®Üa CD"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"H·y n¹p ®Üa CD cµi ®Æt vµo æ ®Üa råi nhÊn OK khi n¹p xong.\n"
-"NÕu b¹n kh«ng cã ®Üa, nhÊn Bá qua ®Ó th«i kh«ng n©ng cÊp thùc."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kh«ng thÓ ch¹y n©ng cÊp thùc!!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "Kh«ng thÊy serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "M« pháng nót thø ba?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "CÊu h×nh t­êng löa"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "CÊu h×nh t­êng löa"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"T­êng löa\n"
-"\n"
-"B¹n ®· thiÕt lËp t­êng löa råi.\n"
-"NhÊp chuét lªn CÊu h×nh ®Ó thay ®æi hoÆc bá t­êng löa"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"T­êng löa\n"
-"\n"
-"NhÊp chuét lªn CÊu h×nh ®Ó thiÕt lËp mét t­êng löa chuÈn"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Chän ng«n ng÷"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Chän kiÓu cµi ®Æt"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Dß t×m æ ®Üa cøng"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "CÊu h×nh chuét"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Chän bµn phÝm"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "B¶o mËt"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "ThiÕt lËp filesystems"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Format c¸c ph©n vïng"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Chän c¸c gãi cµi ®Æt"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Cµi ®Æt hÖ thèng"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Thªm ng­êi dïng"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "CÊu h×nh m¹ng lµm viÖc"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "CÊu h×nh c¸c dÞch vô"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "T¹o ®Üa khëi ®éng"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Cµi ®Æt tr×nh khëi ®éng"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "CÊu h×nh X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Tho¸t khái cµi ®Æt"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Ch­¬ng tr×nh cÊu h×nh t­êng löa nhá\n"
-"\n"
-"Ch­¬ng tr×nh nµy cÊu h×nh mét t­êng löa c¸ nh©n cho Mandrake Linux.\n"
-"VÒ gi¶i ph¸p t­êng löa m¹nh vµ chuyªn dông, h·y quan t©m tíi ph©n phèi\n"
-"t­êng löa b¶o mËt chuyªn dông cña Mandrake."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"B©y giê b¹n sÏ ®­îc hái vÒ nh÷ng dÞch vô nµo mµ b¹n sÏ cho phÐp\n"
-"Internet kÕt nèi vµo.  H·y thËn träng suy nghÜ c¸c c©u hái nµy\n"
-"v× vÊn ®Ò anh ninh cho m¸y tÝnh cña b¹n lµ quan träng.\n"
-"\n"
-"NÕu hiÖn t¹i b¹n kh«ng sö dông mét trong c¸c dÞch vô nµy, h·y\n"
-"ng¨n nã l¹i b»ng t­êng löa. B¹n cã thÓ thay ®æi cÊu h×nh nµy\n"
-"bÊt kú khi nµo b¹n muèn b»ng c¸ch ch¹y l¹i øng dông nµy!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Cã ph¶i b¹n ®ang ch¹y m¸y chñ web trªn m¸y tÝnh nµy v× b¹n cÇn toµn\n"
-"bé Internet tr«ng thÊy? NÕu b¹n ®ang ch¹y mét m¸y chñ web mµ chØ cÇn\n"
-"®­îc truy cËp b»ng mµy tÝnh nµy, b¹n cã thÓ an t©m tr¶ lêi Kh«ng ë ®©y.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Cã ph¶i b¹n ®ang ch¹y mét m¸y chñ tªn miÒn trªn m¸y nµy? NÕu b¹n\n"
-"kh«ng thiÕt lËp ®Ó cung cÊp th«ng tin IP vµ vïng cho toµn bé Internet,\n"
-"h·y tr¶ lêi Kh«ng.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"B¹n cã muèn cho phÐp kÕt nèi Secure Shell (ssh) ®i vµo? §©y\n"
-"lµ mét thay thÕ telnet mµ b¹n cã thÓ dïng ®Ó ®¨ng nhËp vµo.\n"
-"NÕu b¹n ®ang dïng telnet, b¹n nªn døt kho¸t chuyÓn ssh. telnet\n"
-"kh«ng ®­îc m· ho¸ -- cho nªn mét sè kÎ cã thÓ ¨n c¾p mËt khÈu cña\n"
-"b¹n. Dïng ssh ®­îc m· ho¸ ®Ó kh«ng cho phÐp viÖc nghe trém nµy."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"B¹n cã muèn cho phÐp kÕt nèi telnet ®i vµo?\n"
-"§iÒu nµy rÊt kh«ng an toµn vµ ®· ®­îc gi¶i thÝch ë mµn h×nh tr­íc.\n"
-"B¹n rÊt nªn tr¶ lêi Kh«ng ë ®©y vµ h·y dïng ssh trong\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"B¹n ®ang ch¹y m¸y chñ FTP ®Ó cho phÐp truy cËp qua internet?\n"
-"NÕu ®óng, b¹n rÊt nªn chØ sö dông cho viÖc truyÒn (d÷ liÖu) nÆc danh.\n"
-"C¸c mËt khÈu ®­îc göi b»ng FTP cã thÓ bÞ ®¸nh c¾p bëi mét sè kÎ\n"
-"xÊu, v× FTP còng kh«ng sö dông m· hãa ®Ó truyÒn mËt khÈu.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"B¹n ®ang ch¹y m¸y chñ th­ tÝn? NÕu b¹n göi c¸c th«ng ®iÖp\n"
-"qua pine, mutt hoÆc bÊt cø mét ch­¬ng tr×nh th­ client dùa trªn\n"
-"v¨n b¶n, cã lÏ b¹n ®ang ch¹y. NÕu kh«ng, b¹n nªn ng¨n nã l¹i b»ng t­êng "
-"löa.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"B¹n ®ang ch¹y m¸y chñ POP hoÆc IMAP? B¹n nªn dïng\n"
-"®Ó qu¶n lý c¸c account th­ tÝn kh«ng dùa trªn nÒn web cho\n"
-"mäi ng­êi th«ng qua m¸y nµy.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"H×nh nh­ b¹n ®ang ch¹y víi kernel 2.2. NÕu IP m¹ng cña\n"
-"b¹n thiÕt lËp tù ®éng b»ng mét m¸y tÝnh t¹i nhµ hay c¬ quan\n"
-"(®­îc thiÕt kÕ ®éng), h·y cho phÐp ®iÒu nµy.  Cã ph¶i\n"
-"lµ nh­ vËy kh«ng?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Cã ph¶i m¸y tÝnh cña b¹n ®ång bé ho¸ thêi gian víi mét m¸y kh¸c\n"
-"kh«ng? PhÇn lín, ®iÒu nµy ®­îc dïng bëi c¸c tæ chøc Unix/Linux\n"
-"cì lín vµ trung b×nh ®Ó ®ång bé thêi gian cho b¶n ghi vµ t­¬ng tù.\n"
-"NÕu b¹n kh«ng trong c¸c tæ chøc nh­ vËy, b¹n cã lÏ\n"
-"kh«ng dïng."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Hoµn thµnh viÖc cÊu h×nh. Cã thÓ ghi c¸c thay ®æi nµy lªn ®Üa?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Kh«ng më ®­îc %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Kh«ng më ®­îc %s ®Ó ghi: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "M¸y tÝnh m¹ng (kh¸ch)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "M¸y chñ NFS, SMB, SSH, ñy nhiÖm"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "V¨n phßng"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Tr¹m lµm viÖc GNOME"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "C«ng cô cho Palm Pilot hoÆc Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Tr¹m lµm viÖc"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "T­êng löa/§Þnh tuyÕn"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Tªn cña tªn vïng vµ Network Information Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"C¸c ch­¬ng tr×nh v¨n phßng: wordprocessors (kword, abiword), spreadsheets "
-"(kspread, gnumeric), pdf viewers, v.v..."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "C¸c c«ng cô ©m thanh: mp3 hay midi players, mixers,v.v..."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "C¸c s¸ch, how-to cho Linux vµ phÇn mÒm miÔn phÝ"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Tr¹m lµm viÖc KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, v.v..."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "§a ph­¬ng tiÖn - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "ThiÕt lËp c«ng cô cho th­, tin tøc, web, truyÒn tËp tin, vµ trß chuyÖn"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "C¬ së d÷ liÖu"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL hay MySQL m¸y chñ c¬ së d÷ liÖu"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "C«ng cô xo¸ cÊu h×nh m¸y tÝnh cña b¹n"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "§a ph­¬ng tiÖn-¢m thanh"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "C¸c tiÖn Ých"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Tµi liÖu"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "C¸c c«ng cô console"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "M¸y chñ th­ Postfix , M¸y chñ news Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Tr¹m Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Tr¹m ®a ph­¬ng tiÖn"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "CÊu h×nh"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Thªm mµn h×nh nÒn ®å häa (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, mét m«i tr­êng ®å häa víi mét s­u tËp tiÖn Ých ®i kÌm"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "M«i tr­êng ®å ho¹"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Ph¸t triÓn"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache vµ Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "C¸c tiÖn Ých t¹o vµ ghi CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Tr¹m lµm viÖc v¨n phßng"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm,v.v..."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "C¸c ch­¬ng tr×nh ®å ho¹ nh­ lµ Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-"C¸c th­ viÖn ph¸t triÓn C vµ C++, c¸c ch­¬ng tr×nh vµ c¸c tËp tin ®i kÌm"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "M¸y chñ m¹ng"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Th­/PhÇn mÒm nhãm/Tin tøc"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Tr¹m trß ch¬i"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "C¸c tr×nh ch¬i Video vµ so¹n th¶o"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "§a ph­¬ng tiÖn-§å ho¹"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "C¸c ch­¬ng tr×nh gi¶i trÝ: arcade, boards, strategy, v.v..."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"C¸c c«ng cô ®äc vµ göi th­ tÝn vµ tin tøc (pine, mutt, tin..) vµ ®Ó duyÖt Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "CÊt gi÷, m« pháng, theo dâi "
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Tµi chÝnh c¸ nh©n"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"M«i tr­êng ®å häa th©n thiÖn cho c¸c øng dông vµ c¸c tiÖn Ých mµn h×nh nÒn"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "M¸y kh¸ch cho c¸c giao thøc kh¸c bao gåm ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Cæng kÕt nèi Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "C¸c ch­¬ng tr×nh ch¬i Audio-Video/so¹n th¶o"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "C¸c mµn h×nh nÒn ®å ho¹ kh¸c"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "C¸c tr×nh so¹n th¶o, c¸c tiÖn Ých tËp tin, c¸c thiÕt bÞ ®Çu cuèi"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "C¸c ch­¬ng tr×nh qu¶n lý tµi chÝnh cña b¹n, nh­ lµ gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "C¸c trß ch¬i"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Qu¶n lý th«ng tin c¸ nh©n"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "§a ph­¬ng tiÖn - Ghi CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Tr¹m lµm viÖc khoa häc"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "kh«ng thÓ më /etc/sysconfig/autologin ®Ó ®äc: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "B¹n cã muèn khëi ®éng l¹i m¹ng"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "B¹n ®ång ý kh«ng?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "ChuÈn bÞ khëi ®éng l¹i thiÕt bÞ m¹ng:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "chuÈn bÞ khëi ®éng l¹i thiÕt bÞ m¹ng%s. B¹n ®ång ý kh«ng?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Trõ khi b¹n biÕt c¸ch kh¸c, sù lùa chän th«ng th­êng lµ \"/dev/hda\"\n"
-#~ " (æ ®Üa IDE chÝnh thø nhÊt) hay \"/dev/sda\" (æ SCSI thø nhÊt)."
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "C¸c m¸y in sau ®©y ®· ®­îc cÊu h×nh.\n"
-#~ "B¹n cã thÓ thªm hoÆc thay ®æi c¸c m¸y in hiÖn cã."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "HÕt thêi gian kÕt nèi (theo gi©y) [beta, cßn ch­a thùc thi]"
-
-#~ msgid ""
-#~ "The Mandrake Linux spreads among several CDROMs. It may be that drakX "
-#~ "has\n"
-#~ "selected packages on another CDROM than the installation CDROM, and when "
-#~ "it\n"
-#~ "needs that you put another one into the drive, it will eject the current "
-#~ "CDROM\n"
-#~ "and ask you for another one."
-#~ msgstr ""
-#~ "Mandrake Linux chøa trong vµi CDROM. Do ®ã cã thÓ drakX chän\n"
-#~ "c¸c gãi n»m trªn mét CDROM kh¸c víi CDROM cµi ®Æt, vµ khi nã\n"
-#~ "yªu cÇu b¹n n¹p mét CD kh¸c vµo æ ®Üa, nã sÏ nh¶ CDROM hiÖn t¹i ra\n"
-#~ "vµ yªu cÇu b¹n n¹p ®Üa kh¸c vµo."
-
-#~ msgid ""
-#~ "drakX just skips this test unless you purposely click on the "
-#~ "corresponding step\n"
-#~ "on the left. By default, drakX sees your mouse as a two-button mouse and\n"
-#~ "emulates the third button, and knows whether it's PS/2, serial or USB.\n"
-#~ "\n"
-#~ "Perhaps this is not what you want. In that case, you just have to select "
-#~ "the\n"
-#~ "right type for your mouse in the list which appears.\n"
-#~ "\n"
-#~ "You can now test your mouse. Use buttons and wheel to verify if settings "
-#~ "are\n"
-#~ "good. If not, you can click on \"Cancel\" to choose another driver."
-#~ msgstr ""
-#~ "drakX sÏ bá qua viÖc ch¹y thö nµy trõ khi b¹n nhÊn chuét vµo c¸c b­íc "
-#~ "t­¬ng\n"
-#~ "øng bªn tr¸i. Theo mÆc ®Þnh, drakX coi chuét cña b¹n lµ lo¹i 2 nót vµ\n"
-#~ "m« pháng nót thø ba, vµ biÕt nã lµ lo¹i chuét g×: PS/2, serial hay USB.\n"
-#~ "\n"
-#~ "Nh­ng cã thÓ ®ã kh«ng ph¶i lµ c¸i b¹n muèn. Tr­êng hîp nµy, b¹n ph¶i "
-#~ "chän\n"
-#~ "®óng lo¹i chuét cña b¹n trong danh s¸ch hiÓn thÞ.\n"
-#~ "\n"
-#~ "B©y giê cã thÓ ch¹y thö chuét. H·y dïng c¸c nót vµ b¸nh xe ®Ó xem thiÕt "
-#~ "lËp\n"
-#~ "®· ®­îc ch­a. NÕu ch­a, nhÊn chuét lªn \"Bá qua\" ®Ó chän driver kh¸c."
-
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Kh«ng thÓ thiÕt lËp \"%s\" lµm m¸y in mÆc ®Þnh!"
-
-#~ msgid "Spooler: "
-#~ msgstr "Spooler: "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "H·y kiÓm tra chuét ë ®©y."
-
-#~ msgid "Press next to continue."
-#~ msgstr "NhÊn TiÕp theo ®Ó tiÕp tôc."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "H·y chän ng«n ng÷ phï hîp ®Ó cµi ®Æt vµ sö dông hÖ thèng."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "B¹n cÇn chÊp thuËn c¸c ®iÒu kho¶n trong giÊy phÐp kÓ trªn ®Ó tiÕp tôc cµi "
-#~ "®Æt.\n"
-#~ "\n"
-#~ "\n"
-#~ "NhÊn chuét lªn \"ChÊp thuËn\" nÕu b¹n ®ång ý.\n"
-#~ "\n"
-#~ "\n"
-#~ "NhÊn chuét lªn \"Tõ chèi\" nÕu b¹n kh«ng ®ång ý. ViÖc cµi ®Æt sÏ kÕt thóc "
-#~ "vµ hÖ thèng hiÖn cã vÉn ®­îc gi÷ nguyªn\n"
-#~ "cña b¹n."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "H·y chän tæ chøc bµn phÝm thÝch hîp tõ danh s¸ch trªn"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "NÕu b¹n muèn dïng ng«n ng÷ kh¸c (víi ng«n ng÷ b¹n chän ë\n"
-#~ "lóc b¾t ®Çu cµi ®Æt) th× còng thùc hiÖn ®­îc sau cµi ®Æt, h·y chän\n"
-#~ "ë danh s¸ch trªn. NÕu b¹n muèn chän tÊt c¶, chØ viÖc chän \"Toµn bé\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Chän:\n"
-#~ "\n"
-#~ "  - Tïy chØnh: nÕu b¹n quen thuéc víi GNU/Linux, b¹n cã thÓ chän\n"
-#~ "    môc ®Ých dïng chÝnh cho m¸y cña b¹n. Xem chi tiÕt bªn d­íi.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Chuyªn gia: B¹n n¾m v÷ng GNU/Linux vµ muèn\n"
-#~ "    thùc hiÖn kiÓu cµi ®Æt cã tÝnh tïy chän cao. Nh­ víi kiÓu \"Tïy chØnh"
-#~ "\"\n"
-#~ "    b¹n cã thÓ chän môc ®Ých sö dông cho hÖ thèng cña b¹n.\n"
-#~ "    Nh­ng h·y thËt l­u ý: kh«ng nªn chän kiÓu nµy trõ khi b¹n biÕt c«ng "
-#~ "viÖc ®ang lµm!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "B©y giê b¹n ph¶i ®Þnh râ môc ®Ých sö dông m¸y. Víi c¸c lùa chän lµ:\n"
-#~ "\n"
-#~ "* Tr¹m lµm viÖc: kiÓu nµy phï hîp nÕu b¹n dïng m¸y tÝnh chñ yÕu cho c«ng "
-#~ "viÖc hµng ngµy, t¹i c¬ quan hay\n"
-#~ "  t¹i nhµ.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Ph¸t triÓn: nÕu b¹n muèn sö dông m¸y tÝnh chñ yÕu ®Ó ph¸t triÓn phÇn "
-#~ "mÒm, ®©y lµ sù lùa chän tèt. B¹n\n"
-#~ "  sÏ cã mét tËp hîp phÇn mÒm hoµn chØnh ®­îc cµi ®Æt ®Ó biªn dÞch, gì "
-#~ "rèi, ®Þnh d¹ng m· nguån,\n"
-#~ "  hoÆc t¹o c¸c gãi øng dông.\n"
-#~ "\n"
-#~ "\n"
-#~ "* M¸y chñ: nÕu b¹n muèn m¸y tÝnh lµ m¸y chñ, ®ã lµ sù lùa chän tèt. M¸y "
-#~ "chñ chia xÎ tËp tin (NFS hay\n"
-#~ "  SMB), m¸y chñ in Ên (kiÓu Unix hay Microsoft Windows), m¸y chñ x¸c thùc "
-#~ "(NIS), m¸y chñ\n"
-#~ "  c¬ së dò liÖu vµ v©n v©n... Nh­ng b¹n ®õng tr«ng mong cã bÊt kú gimmick "
-#~ "nµo (KDE, GNOME, v.v...) ®­îc cµi ®Æt."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ chän nhãm c¸c gãi (øng dông) mµ b¹n muèn\n"
-#~ "cµi ®Æt hay n©ng cÊp.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX sau ®ã sÏ kiÓm tra xem b¹n cã ®ñ kh«ng gian ®Ó cµi ®Æt tÊt c¶ chóng "
-#~ "kh«ng. NÕu kh«ng,\n"
-#~ "b¹n sÏ ®­îc th«ng b¸o. NÕu b¹n vÉn cø muèn thùc hiÖn , qu¸ tr×nh cµi ®Æt "
-#~ "vÉn\n"
-#~ "thùc hiÖn víi c¸c gãi øng dông ®­îc chän nh­ng mét sè sÏ bÞ bá r¬i vµ sÏ "
-#~ "kÐm\n"
-#~ "chøc n¨ng h¬n. PhÝa cuèi danh s¸ch, b¹n cã thÓ chän tïy chän \n"
-#~ "\"C¸c gãi chän riªng\"; trong tr­êng hîp nµy b¹n sÏ ph¶i duyÖt qua\n"
-#~ "h¬n 1000 gãi..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ chän riªng tÊt c¶ c¸c gãi mµ b¹n muèn\n"
-#~ "cµi ®Æt.\n"
-#~ "\n"
-#~ "\n"
-#~ "B¹n cã thÓ më réng hay thu hÑp c©y th­ môc b»ng nhÊp chuét lªn c¸c tïy "
-#~ "chän ë gãc tr¸i cña cöa sæ \n"
-#~ "danh s¸ch c¸c gãi.\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu b¹n muèn xem danh s¸nh c¸c gãi theo vÇn ch÷ c¸i, nhÊp chuét lªn biÓu "
-#~ "t­îng\n"
-#~ "\"ChuyÓn gi÷a d·y vµ nhãm ®­îc ph©n lo¹i\".\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu b¹n kh«ng muèn xem th«ng b¸o vÒ c¸c phô thuéc, nhÊp chuét lªn \"X¸c "
-#~ "®Þnh\n"
-#~ "phô thuéc tù ®éng\". NÕu b¹n chän kiÓu nµy, mét gãi kh«ng ®­îc chän cã "
-#~ "thÓ n¹p theo vµi\n"
-#~ "gãi kh«ng ®­îc chän kh¸c phô thuéc vµo nã mét c¸ch ngÊm ngÇm."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "NÕu b¹n cã ®ñ ®Üa CD trong danh s¸ch trªn, nhÊp OK. NÕu b¹n kh«ng cã\n"
-#~ "c¸c CD nµy, nhÊp Bá qua. NÕu chØ thiÕu vµi CD , bá chän chóng,\n"
-#~ "råi nhÊp OK."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "H·y ch¹y thö chuét. Sö dông c¸c nót vµ b¸nh xe ®Ó kiÓm tra xem\n"
-#~ "thiÕt lËp ®· ®­îc ch­a. NÕu ch­a, nhÊn lªn \"Bá qua\" ®Ó chän mét driver\n"
-#~ "kh¸c.\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu ®ang thùc hiÖn cµi ®Æt trªn m¸y Apple cã chuét mét nót, b¹n sÏ cã\n"
-#~ "®iÒu kiÖn ®Þnh nghÜa mét sè phÝm cña bµn phÝm ®Ó m« pháng c¸c nót chuét\n"
-#~ "thø hai vµ thø ba. §iÒu nµy cho phÐp b¹n sö dông ®Çy ®ñ tÝnh n¨ng cña "
-#~ "chuét\n"
-#~ "trong c¶ console vµ giao diÖn ng­êi dïng ®å häa X Window.\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu lµ chuét ADB, h·y chän USB, nh©n kernel Linux sÏ thùc hiÖn\n"
-#~ "¸nh x¹ chÝnh x¸c thiÕt bÞ chuét."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "NÕu b¹n muèn truy cËp vµo Internet hay\n"
-#~ "vµo mét m¹ng côc bé, h·y thiÕt lËp tïy chän chÝnh x¸c. BËt thiÕt bÞ lªn\n"
-#~ "tr­íc khi thiÕt lËp ®Ó choDrakX tù ®éng ph¸t hiÖn ra thiÕt bÞ kÕt nèi.\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu b¹n kh«ng cã bÊt kú mét kÕt nèi Internet hay m¹ng côc bé nµo, chän\n"
-#~ "\"Kh«ng ch¹y tÝnh n¨ng m¹ng\".\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu b¹n muèn cÊu h×nh m¹ng sau khi cµi ®Æt hoÆc b¹n ®· cÊu h×nh xong\n"
-#~ "chøc n¨ng kÕt nèi m¹ng, chän \"Hoµn thµnh\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Kh«ng ph¸t hiÖn ®­îc modem. H·y chän cæng nèi tiÕp (serial port) ®­îc nèi "
-#~ "víi modem.\n"
-#~ "\n"
-#~ "\n"
-#~ "VÒ th«ng tin, cæng nèi tiÕp ®Çu tiªn ( \"COM1\" trong Microsoft\n"
-#~ "Windows) cã tªn lµ  \"ttyS0\" trong Linux."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ ®iÒn vµo môc tïy chän dialup. NÕu b¹n kh«ng biÕt hay\n"
-#~ "kh«ng râ th«ng tin kÕt nèi, b¹n cã thÓ hái th«ng tin kÕt nèi cô thÓ tõ\n"
-#~ "nhµ cung cÊp dÞch vô Internet cña b¹n. NÕu b¹n kh«ng ®iÒn th«ng tin vµo\n"
-#~ "« DNS (tªn m¸y chñ), th× th«ng tin nµy tõ nhµ cung cÊp dÞch vô internet "
-#~ "sÏ ®­îc\n"
-#~ "g¸n vµo khi b¹n kÕt nèi."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "NÕu modem cña b¹n n»m ngoµi m¸y, bËt nã lªn ®Ó cho DrakX tù ®éng ph¸t "
-#~ "hiÖn."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "H·y bËt modem lªn vµ chän ®óng nã"
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "NÕu nh­ b¹n kh«ng ch¾c ch¾n c¸c th«ng tin trªn lµ chÝnh x¸c\n"
-#~ "hoÆc b¹n kh«ng biÕt chÝnh x¸c th«ng tin nhËp vµo, th× c¸c th«ng tin nµy\n"
-#~ "cã thÓ lÊy tõ nhµ cung cÊp dÞch vô Internet cña b¹n. NÕu b¹n kh«ng nhËp\n"
-#~ "th«ng tin cho DNS (tªn m¸y chñ) vµo ®©y, th× th«ng tin nµy sÏ ®­îc lÊy\n"
-#~ "tõ nhµ cung cÊp dÞch vô Internet cña b¹n khi kÕt nèi."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ ®iÒn tªn m¸y chñ nÕu cÇn thiÕt. Tr­êng hîp b¹n\n"
-#~ "kh«ng biÕt hoÆc kh«ng biÕt râ néi dung cÇn ®iÒn vµo, th«ng tin kÕt nèi "
-#~ "sÏ\n"
-#~ "®­îc lÊy tõ nhµ cung cÊp dÞch vô Internet cña b¹n."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ cÊu h×nh thiÕt bÞ m¹ng cña b¹n.\n"
-#~ "\n"
-#~ "   * §Þa chØ IP: nÕu b¹n kh«ng biÕt hay kh«ng râ ph¶i nhËp g× vµo, h·y "
-#~ "hái ng­êi qu¶n trÞ m¹ng.\n"
-#~ "     B¹n kh«ng nªn nhËp ®Þa chØ IP nÕu b¹n dïng tïy chän  \"IP tù ®éng\" "
-#~ "bªn d­íi.\n"
-#~ "\n"
-#~ "   * MÆt n¹ m¹ng: \"255.255.255.0\" th­êng lµ sù lùa chän tèt. NÕu b¹n "
-#~ "kh«ng biÕt hay kh«ng râ ph¶i ®iÒn g× vµo,\n"
-#~ "     h·y hái ng­êi qu¶n trÞ m¹ng.\n"
-#~ "\n"
-#~ "   * IP tù ®éng: nÕu m¹ng cña b¹n sö dông giao thøc BOOTP hoÆc DHCP, h·y "
-#~ "dïng tïy chän nµy. Khi ®· chän, kh«ng cÇn ®iÒn gi¸ trÞ nµo vµo\n"
-#~ "    \"§Þa chØ IP\". Tr­êng hîp b¹n kh«ng biÕt hay kh«ng ch¾c ch¾n cã cÇn "
-#~ "dïng tïy chän nµy hay kh«ng, h·y hái ng­êi qu¶n trÞ m¹ng."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ ®iÒn tªn m¸y chñ vµo nÕu thÊy cÇn thiÕt. NÕu b¹n "
-#~ "kh«ng\n"
-#~ "biÕt hay kh«ng ch¾c ch¾n ph¶i ®iÒn g× vµo, h·y hái ng­êi qu¶n trÞ m¹ng."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ ®iÒn tªn m¸y chñ vµo nÕu cÇn. NÕu\n"
-#~ "kh«ng biÕt hay kh«ng ch¾c ch¾n cÇn ®iÒn g× vµo, h·y ®Ó trèng."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ nhËp tïy chän dialup. NÕu b¹n kh«ng râ ph¶i ®iÒn g× "
-#~ "vµo,\n"
-#~ "th«ng tin chÝnh x¸c cã thÓ ®­îc lÊy tõ nhµ cung cÊp dÞch vô Internet cña "
-#~ "b¹n."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "NÕu dïng m¸y chñ ñy nhiÖm, h·y cÊu h×nh b©y giê. NÕu b¹n kh«ng biÕt\n"
-#~ "lµ cã nªn dïng hay kh«ng, h·y hái ng­êi qu¶n trÞ m¹ng hoÆc nhµ cung cÊp "
-#~ "dÞch vô Internet."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "B¹n cã thÓ cµi ®Æt gãi m· ho¸ (cryptographic) khi thiÕt lËp kÕt nèi "
-#~ "internet \n"
-#~ "®· ®óng. §Çu tiªn chän mét mirror mµ b¹n muèn t¶i xuèng c¸c gãi, sau\n"
-#~ "®ã chän c¸c gãi ®Ó cµi ®Æt.\n"
-#~ "\n"
-#~ "\n"
-#~ "Chó thÝch: b¹n ph¶i chän mirror vµ c¸c gãi m· hãa theo \n"
-#~ "luËt ph¸p cña n­íc m×nh."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "B©y giê b¹n chän mói giê theo vïng b¹n ®ang ë "
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "B¹n cã thÓ cÊu h×nh m¸y in côc bé (®­îc nèi víi m¸y cña b¹n) hay m¸y in\n"
-#~ "ë xa (cã thÓ truy cËp qua mét m¹ng Unix, Netware hay Microsoft Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "NÕu b¹n muèn dïng chøc n¨ng in Ên, h·y chän mét hÖ thèng in gi÷a\n"
-#~ "CUPS vµ LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS lµ mét tiÖn Ých in Ên míi, m¹nh vµ mÒm dÎo cho hÖ thèng Unix (CUPS\n"
-#~ "cã nghÜa lµ \"Common Unix Printing System\"). §©y lµ hÖ thèng in Ên mÆc "
-#~ "®Þnh trong\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR lµ hÖ thèng in Ên cò ®­îc sö dông trong c¸c b¶n ph©n phèi Mandrake "
-#~ "Linux tr­íc ®©y.\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu b¹n kh«ng cã m¸y in, nhÊp chuét lªn \"Kh«ng cã\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux cã thÓ lµm viÖc víi nhiÒu lo¹i m¸y in. Mçi lo¹i l¹i cã yªu cÇu\n"
-#~ "cµi ®Æt kh¸c nhau.\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu m¸y in ®­îc nèi trùc tiÕp víi m¸y tÝnh, chän \"M¸y in\n"
-#~ "côc bé\".\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu b¹n muèn truy cËp tíi m¸y in cña mét m¸y tÝnh Unix ë xa, chän\n"
-#~ "\"M¸y in ë xa\".\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu b¹n muèn truy cËp m¸y in cña mét m¸y tÝnh Microsoft Windows ë xa\n"
-#~ "(hoÆc m¸y tÝnh Unix sö dông giao thøc SMB), chän \"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "H·y bËt m¸y in tr­íc khi tiÕp tôc qu¸ tr×nh ®Ó cho DrakX ph¸t hiÖn ®­îc.\n"
-#~ "\n"
-#~ "B¹n cÇn ®iÒn mét sè th«ng tin vµo ®©y.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Tªn m¸y in: spooler cña m¸y in dïng \"lp\" lµm tªn m¸y in mÆc ®Þnh. "
-#~ "V× vËy, m¸y in ph¶i cã tªn lµ \"lp\".\n"
-#~ "     NÕu b¹n chØ cã mét m¸y in, b¹n cã thÓ dïng vµi tªn cho nã. B¹n rÊt "
-#~ "cÇn t¸ch riªng chóng b»ng ®Æc tÝnh\n"
-#~ "     èng dÉn (pipe) nh­ sau (a \"|\"). Do ®ã, nÕu b¹n thÝch mét c¸i tªn "
-#~ "cã ý nghÜa h¬n, b¹n ph¶i ®iÒn nã vµo phÇn ®Çu cña tªn, VD: \"My printer|lp"
-#~ "\".\n"
-#~ "     M¸y in cã  \"lp\" trong tªn cña nã sÏ lµ m¸y in mÆc ®Þnh.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * M« t¶: ®iÒu nµy mang tÝnh tïy thÝch nh­ng h÷u Ých khi b¹n cã vµi m¸y "
-#~ "in nèi víi m¸y tÝnh cña b¹n hoÆc khi b¹n cho phÐp\n"
-#~ "     c¸c m¸y tÝnh kh¸c truy cËp tíi m¸y in nµy.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * VÞ trÝ: NÕu b¹n muèn ghi chó thªm th«ng tin vÒ vÞ trÝ\n"
-#~ "     ®Æt m¸y in cña b¹n, h·y ®iÒn vµo ®©y (b¹n ®­îc phÐp ghi\n"
-#~ "     g× lµ tïy b¹n, vÝ dô: \"LÇu hai\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "B¹n cÇn ®iÒn mét sè th«ng tin vµo ®©y.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Tªn hµng in: spooler cña m¸y in dïng \"lp\" lµm tªn m¸y in mÆc ®Þnh. "
-#~ "V× vËy, b¹n cÇn cã mét tªn cho m¸y in lµ \"lp\".\n"
-#~ "    NÕu b¹n chØ cã mét m¸y in, b¹n cã thÓ dïng vµi tªn cho nã. B¹n rÊt "
-#~ "cÇn t¸ch riªng chóng b»ng ®Æc tÝnh èng dÉn\n"
-#~ "    (pipe) nh­ sau (a \"|\"). V× thÕ, nÕu b¹n thÝch mét c¸i tªn cã ý "
-#~ "nghÜa h¬n, b¹n ph¶i ®iÒn nã vµo phÇn ®Çu cña tªn, VD: \"My printer|lp\".\n"
-#~ "    M¸y in cã  \"lp\" trong tªn cña nã sÏ lµ m¸y in mÆc ®Þnh.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Th­ môc Spool: ®©y lµ th­ môc chøa c¸c c«ng viÖc in Ên. H·y gi÷ tïy "
-#~ "chän mÆc ®Þnh\n"
-#~ "     nÕu b¹n kh«ng biÕt dïng nh­ thÕ nµo.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * KÕt nèi m¸y in: nÕu m¸y in ®­îc nèi trùc tiÕp víi m¸ytÝnh cña b¹n, "
-#~ "h·y chän \"M¸y in côc bé\".\n"
-#~ "     NÕu b¹n muèn truy cËp tíi m¸y in cña m¸y tÝnh Unix ë xa, h·y chän "
-#~ "\"M¸y in lpd ë xa\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     NÕu b¹n muèn truy cËp tíi m¸y in cña mét m¸y tÝnh ch¹y Microsoft "
-#~ "Windows (hoÆc cña mét m¸y tÝnh Unix sö dông giao thøc SMB),\n"
-#~ "     h·y chän \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     NÕu b¹n muèn truy cËp tíi m¸y in cña m¹ng NetWare, h·y chän \"NetWare"
-#~ "\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Kh«ng ph¸t hiÖn ra m¸y in cña b¹n. H·y ®iÒn tªn thiÕt bÞ mµ\n"
-#~ "m¸y in ®­îc nèi vµo.\n"
-#~ "\n"
-#~ "\n"
-#~ "VÒ th«ng tin, c¸c m¸y in th­êng ®­îc nèi víi cæng song song thø nhÊt. "
-#~ "Cæng\n"
-#~ "nµy cã tªn lµ \"/dev/lp0\" trong GNU/Linux vµ \"LPT1\" trong Microsoft "
-#~ "Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "B©y giê b¹n ph¶i chän m¸y in trong danh s¸ch ë trªn."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "H·y lùa ®óng c¸c tïy chän cho m¸y in cña b¹n.\n"
-#~ "Xem tµi liÖu ®i kÌm víi m¸y in nÕu b¹n kh«ng biÕt cÇn ph¶i chän g×.\n"
-#~ "\n"
-#~ "\n"
-#~ "B¹n cã thÓ ch¹y thö ®Ó kiÓm tra cÊu h×nh ®­îc thiÕt lËp ë b­íc tiÕp theo "
-#~ "vµ còng cã thÓ thay ®æi l¹i nÕu nã ho¹t ®éng kh«ng ch­a tèt."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "B©y giê b¹n ®iÒn mËt khÈu root cho hÖ thèng Mandrake Linux .\n"
-#~ "MËt khÈu ph¶i ®­îc nhËp vµo hai lÇn ®Ó x¸c nhËn lµ mËt khÈu ë c¶ hai lÇn "
-#~ "®Òu nh­ nhau.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root lµ ng­êi qu¶n trÞ hÖ thèng vµ duy nhÊt ®­îc phÐp thay ®æi\n"
-#~ "cÊu h×nh hÖ thèng. V× vËy, h·y thËn träng khi chän mËt khÈu nµy. \n"
-#~ "Sö dông bõa b·i account cña root cã thÓ g©y nguy hiÓm trÇm träng tíi tÝnh "
-#~ "toµn vÑn\n"
-#~ "cña hÖ thèng, d÷ liÖu cña nã còng nh­ tíi c¸c hÖ thèng kh¸c kÕt nèi víi "
-#~ "nã.\n"
-#~ "\n"
-#~ "\n"
-#~ "MËt khÈu nªn gåm c¸c ký tù lµ ch÷ c¸i lÉn sè vµ ph¶i cã\n"
-#~ " ®é dµi Ýt nhÊt 8 ký tù. Kh«ng nªn ghi nã vµo (giÊy).\n"
-#~ "\n"
-#~ "\n"
-#~ "Kh«ng nªn dïng mËt khÈu qu¸ dµi vµ phøc t¹p, ®Ó b¹n cã thÓ dÔ\n"
-#~ "dµng nhí nã."
-
-#~ msgid ""
-#~ "If your network uses LDAP (or NIS) protocol for authentication, select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "NÕu m¹ng lµm viÖc dïng giao thøc LDAP (hay NIS) ®Ó chøng thùc, h·y chän\n"
-#~ "\"LDAP\" (hay \"NIS\") ®Ó chøng thùc. NÕu b¹n kh«ng biÕt, h·y hái ng­êi "
-#~ "qu¶n\n"
-#~ " trÞ m¹ng.\n"
-#~ "\n"
-#~ "NÕu m¸y tÝnh kh«ng kÕt nèi víi mét m¹ng ®­îc qu¶n trÞ nµo, cã lÏ b¹n sÏ\n"
-#~ " chän \"TËp tin côc bé\" ®Ó chøng thùc."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ t¹o mét hay vµi account ng­êi dïng \"th«ng th­êng\",\n"
-#~ "chóng kh«ng cã \"®Æc quyÒn\" nh­ account root. B¹n cã thÓ t¹o mét hay \n"
-#~ "vµi account cho c¸c ng­êi mµ b¹n cho phÐp sö dông m¸y tÝnh\n"
-#~ "cña b¹n. L­u ý lµ mçi mét ng­êi dïng sÏ cã mét tïy thÝch riªng\n"
-#~ "cho m×nh nh­ (m«i tr­êng ®å häa, c¸c thiÕt lËp ch­¬ng tr×nh, v.v...)\n"
-#~ "vµ \"th­ môc Home\" riªng biÖt, lµ n¬i cÊt gi÷ c¸c tïy thÝch\n"
-#~ "nµy.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tr­íc hÕt, h·y t¹o mét account cho b¹n! ThËm chÝ b¹n kh«ng ph¶i lµ ng­êi\n"
-#~ "dïng duy nhÊt, b¹n cã thÓ kh«ng sö dông account root hµng ngµy: do cã\n"
-#~ "nguy c¬ cao vÒ vÊn ®Ò b¶o mËt. DÔ g©y cho hÖ thèng kh«ng sö dông ®­îc "
-#~ "th­êng do lçi gâ bµn phÝm.\n"
-#~ "\n"
-#~ "\n"
-#~ "V× vËy, b¹n nªn ®¨ng nhËp vµo hÖ thèng b»ng account ng­êi dïng.\n"
-#~ "B¹n sÏ t¹o nã ë ®©y, viÖc ®¨ng nhËp b»ng root chØ dµnh cho c¸c môc ®Ých\n"
-#~ "qu¶n trÞ vµ b¶o tr× hÖ thèng."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "T¹o ®Üa khëi ®éng lµ viÖc rÊt nªn thùc hiÖn. Tr­êng hîp kh«ng thÓ\n"
-#~ "khëi ®éng ®­îc m¸y tÝnh th× ®©y lµ c¸ch duy nhÊt cøu ch÷a hÖ thèng mµ\n"
-#~ "kh«ng ph¶i cµi ®Æt l¹i."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Tïy chän chÝnh cña LILO vµ grub lµ:\n"
-#~ "  - ThiÕt bÞ khëi ®éng: ®Æt tªn cho thiÕt bÞ (VD: mét ph©n vïng\n"
-#~ "æ cøng) mµ nã chøa sector khëi ®éng. Trõ khi ban biÕt thªm c¸ch\n"
-#~ "kh¸c, h·y chän \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Tr× ho·n tr­íc khi khëi ®éng ¶nh mÆc ®Þnh: chØ ®Þnh sè hµng chôc\n"
-#~ "cña gi©y mµ tr×nh khëi ®éng ph¶i chê tr­íc khi n¹p ¶nh ®Çu tiªn.\n"
-#~ "§iÒu nµy h÷u dông cho c¸c hÖ thèng khëi ®éng tøc th× tõ æ cøng khi\n"
-#~ "nhÊn bµn phÝm. Tr×nh khëi ®éng sÏ kh«ng chê nÕu \"Tr× ho·n\" ®­îc\n"
-#~ "bá qua hoÆc ®­îc ®Æt b»ng 0.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ChÕ ®é Video: chÕ ®é nµy ®Þnh ra chÕ ®é v¨n b¶n VGA, nªn chän dïng\n"
-#~ "khi khëi ®éng. S½n cã c¸c gi¸ trÞ sau ®©y: \n"
-#~ "\n"
-#~ "    * B×nh th­êng: lùa tïy chän v¨n b¶n 80x25 b×nh th­êng.\n"
-#~ "\n"
-#~ "    * <sè>:  dïng tïy chän v¨n b¶n thÝch hîp.\n"
-#~ "\n"
-#~ "  - Xãa \"/tmp\" t¹i mçi lÇn khëi ®éng: nÕu b¹n muèn xãa toµn bé c¸c tËp "
-#~ "tin vµ c¸c th­ môc\n"
-#~ "n»m trong \"/tmp\" khi b¹n khëi ®éng hÖ thèng, h·y chän tïy chän nµy.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Lµm râ RAM nÕu cÇn: kh«ng may lµ l¹i kh«ng cã ph­¬ng ph¸p chuÈn mùc "
-#~ "nµo\n"
-#~ "®Ó hái BIOS vÒ sè l­îng RAM hiÖn cã trong m¸y tÝnh. KÕt qu¶ lµ Linux cã "
-#~ "thÓ kh«ng\n"
-#~ "ph¸t hiÖn chÝnh x¸c sè l­îng RAM cña b¹n. Trong tr­êng hîp nµy, b¹n\n"
-#~ "cã thÓ ®Þnh râ sè l­îng RAM t¹i ®©y. H·y l­u ý lµ sai sè tõ 2 ®Õn 4 "
-#~ "MBgi÷a\n"
-#~ "bé nhí ph¸t hiÖn ®­îc vµ bé nhí hiÖn cã trong hÖ thèng lµ b×nh th­êng."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO lµ tr×nh khëi ®éng cho SPARC: nã cã thÓ khëi ®éng cho\n"
-#~ "c¶ GNU/Linux vµ bÊt kú hÖ ®iÒu hµnh nµo cã trong m¸y tÝnh cña b¹n.\n"
-#~ "Th«ng th­êng, c¸c hÖ ®iÒu hµnh kh¸c nµy ®­îc ph¸t hiÖn chÝnh x¸c\n"
-#~ "vµ ®­îc cµi ®Æt. NÕu kh«ng ph¸t hiÖn ®­îc, b¹n cã thÓ thªm môc nhËp\n"
-#~ "b»ng tay ë mµn h×nh nµy. H·y thËn träng chän chÝnh x¸c c¸c th«ng sè.\n"
-#~ "\n"
-#~ "\n"
-#~ "B¹n còng cã thÓ kh«ng muèn ng­êi nµo ®ã truy cËp vµo c¸c hÖ ®iÒu hµnh\n"
-#~ "kh¸c nµy, nÕu vËy th× b¹n cã thÓ xãa c¸c môc nhËp t­¬ng øng. Nh­ng\n"
-#~ "trong tr­êng hîp nµy, b¹n cÇn t¹o mét ®Üa khëi ®éng ®Ó khëi ®éng chóng!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Tïy chän chÝnh cña SILO:\n"
-#~ "  - Cµi ®Æt tr×nh khëi ®éng: hiÓn thÞ vÞ trÝ b¹n nuèn ®Æt th«ng tin cÇn\n"
-#~ "thiÕt cho qu¸ tr×nh khëi ®éng cña GNU/Linux. NÕu b¹n biÕt chÝnh x¸c\n"
-#~ "viÖc ®ang lµm, h·y chän \"Sector ®Çu tiªn cña æ ®Üa (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  Tr× ho·n tr­íc khi khëi ®éng ¶nh mÆc ®Þnh: chØ ®Þnh sè hµng chôc\n"
-#~ "cña gi©y mµ tr×nh khëi ®éng ph¶i chê tr­íc khi khëi ®éng ¶nh ®Çu tiªn.\n"
-#~ "§iÒu nµy h÷u dông cho c¸c hÖ thèng khëi ®éng tøc th× tõ æ cøng khi\n"
-#~ "nhÊn bµn phÝm. Tr×nh khëi ®éng sÏ kh«ng chê nÕu \"Tr× ho·n\" ®­îc\n"
-#~ "bá qua hoÆc ®­îc ®Æt b»ng 0."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "B©y giê lµ lóc cÊu h×nh hÖ thèng X Window, ®©y lµ h¹t nh©n\n"
-#~ "cña GNU/Linux GUI (giao diÖn ng­êi dïng ®å ho¹). §Ó thùc hiÖn,\n"
-#~ "b¹n ph¶i cÊu h×nh card video vµ mµn h×nh. HÇu hÕt c¸c b­íc ®Òu\n"
-#~ "tù ®éng, cho nªn c«ng viÖc cña b¹n cã thÓ chØ lµ sù thÈm\n"
-#~ "tra phÇn nµo ®· hoµn thµnh vµ chÊp thuËn c¸c thiÕt lËp :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Khi ®· xong phÇn cÊu h×nh, X sÏ ®­îc khëi ®éng (trõ khi b¹n\n"
-#~ "yªu cÇu DrakX kh«ng thùc hiÖn) do vËy b¹n cã thÓ kiÓm tra vµ xem\n"
-#~ "c¸c thiÕt lËp cã phï hîp víi b¹n kh«ng. NÕu kh«ng, b¹n cã thÓ trë l¹i\n"
-#~ "vµ thay ®æi chóng cho tíi khi ®¹t yªu cÇu."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "NÕu cã g× ®ã ch­a ®óng khi cÊu h×nh X, h·y lùa c¸c tïy chän nµy ®Ó\n"
-#~ "cÊu h×nh chÝnh x¸c hÖ thèng X Window."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "NÕu b¹n muèn sö dông ®¨ng nhËp b»ng chÕ ®é ®å häa, chän \"Cã\".\n"
-#~ "NÕu kh«ng th× chän \"Kh«ng\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "B¹n cã thÓ chän mét møc b¶o mËt cho hÖ thèng cña b¹n. H·y tham kh¶o tµi "
-#~ "liÖu ®Ó hoµn thµnh\n"
-#~ "  c¸c th«ng tin. VÒ c¬ b¶n, nÕu b¹n kh«ng biÕt chän g×, h·y gi÷ tïy chän "
-#~ "mÆc ®Þnh.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "M¸y tÝnh cña b¹n sÏ khëi ®éng l¹i.\n"
-#~ "\n"
-#~ "Sau khi khëi ®éng l¹i, hÖ thèng Mandrake Linux míi sÏ tù ®éng n¹p.\n"
-#~ "NÕu b¹n muèn khëi ®éng vµo hÖ ®iÒu hµnh hiÖn cã kh¸c, h·y ®äc thªm\n"
-#~ "phÇn h­íng dÉn."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Czech (Programmers)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovakian (Programmers)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Tªn lý lÞch ®Ó t¹o:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Ghi /ect/fstab"
-
-#~ msgid "Restore from file"
-#~ msgstr "Kh«i phôc tõ tËp tin"
-
-#~ msgid "Save in file"
-#~ msgstr "L­u vµo tËp tin"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Kh«i phôc tõ ®Üa mÒm"
-
-#~ msgid "Format all"
-#~ msgstr "Format toµn bé"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Sau khi format mäi ph©n vïng,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "tÊt c¶ d÷ liÖu trªn ®ã sÏ bÞ mÊt"
-
-#~ msgid "Reload"
-#~ msgstr "N¹p l¹i"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "B¹n cã muèn t¹o mét ®Üa mÒm cµi ®Æt tù ®éng cho thø b¶n Linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "CÊu h×nh ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Víi m¸y chñ CUPS ë xa, b¹n kh«ng ph¶i cÊu h×nh bÊt kú\n"
-#~ "m¸y in nµo ë ®©y; c¸c m¸y in sÏ ®­îc tù ®éng ph¸t hiÖn\n"
-#~ "trõ khi b¹n cã mét m¸y chñ ë m¹ng kh¸c; tr­êng hîp nµy,\n"
-#~ "b¹n ph¶i cung cÊp ®Þa chØ IP cña m¸y chñ CUPS \n"
-#~ "vµ sè cæng t­¬ng øng."
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "H·y nhËp tªn m¸y in vµ chó thÝch"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "ThiÕu tªn hµng in ë xa!"
-
-#~ msgid "Pipe into command"
-#~ msgstr "Pipe (®Æt èng dÉn) vµo trong lÖnh"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "T¹i ®©y, b¹n cã thÓ chØ ®Þnh bÊt kú mét dßng lÖnh tïy ý, c«ng viÖc nªn "
-#~ "®­îc ®­a vµo èng dÉn (pipe) thay v× ®­îc göi trùc tiÕp tíi m¸y in."
-
-#~ msgid "Command line"
-#~ msgstr "Dßng lÖnh"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "CÇn ph¶i nhËp dßng lÖnh!"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Theo dâi m¹ng"
-
-#~ msgid "Settings"
-#~ msgstr "C¸c thiÕt lËp"
-
-#~ msgid "Profile "
-#~ msgstr "Lý lÞch "
-
-#~ msgid "Statistics"
-#~ msgstr "Thèng kª"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Tèc ®é göi: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Tèc ®é nhËn: "
-
-#~ msgid "Connection Time: "
-#~ msgstr "Thêi gian kÕt nèi:"
-
-#~ msgid "Logs"
-#~ msgstr "B¶n ghi"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "§ang kÕt nèi víi Internet"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Ng¾t kÕt nèi Internet"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Kh«ng ng¾t ®­îc kÕt nèi Internet."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Ng¾t xong kÕt nèi Internet."
-
-#~ msgid "Connection complete."
-#~ msgstr "Hoµn thµnh kÕt nèi."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "KÕt nèi háng.\n"
-#~ "KiÓm tra l¹i thiÕt lËp trong Trung T©m §iÒu KhiÓn Mandrake."
-
-#~ msgid "Color configuration"
-#~ msgstr "CÊu h×nh mµu s¾c"
-
-#~ msgid "sent: "
-#~ msgstr "®· göi: "
-
-#~ msgid "received: "
-#~ msgstr "®· nhËn: "
-
-#~ msgid "average"
-#~ msgstr "trung b×nh"
-
-#~ msgid "Connect"
-#~ msgstr "KÕt nèi"
-
-#~ msgid "Disconnect"
-#~ msgstr "Ng¾t kÕt nèi"
-
-#~ msgid "/File/_New"
-#~ msgstr "/TÖp/_Míi"
-
-#~ msgid "<control>N"
-#~ msgstr "<control>N"
-
-#~ msgid "/File/_Open"
-#~ msgstr "/TÖp/_Më"
-
-#~ msgid "<control>O"
-#~ msgstr "<control>O"
-
-#~ msgid "/File/_Save"
-#~ msgstr "/TÖp/_L­u"
-
-#~ msgid "<control>S"
-#~ msgstr "<control>S"
-
-#~ msgid "/File/Save _As"
-#~ msgstr "/TÖp/L­u_lµ"
-
-#~ msgid "/File/-"
-#~ msgstr "/TÖp/-"
-
-#~ msgid "/_Options"
-#~ msgstr "/_Tïy chän"
-
-#~ msgid "/Options/Test"
-#~ msgstr "/Tïy chän/Ch¹y thö"
-
-#~ msgid "/_Help"
-#~ msgstr "/_Gióp"
-
-#~ msgid "/Help/_About..."
-#~ msgstr "/Gióp/_VÒ..."
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Møc ho¹t ®éng mÆc ®Þnh"
-
-#~ msgid "Europe"
-#~ msgstr "Europe"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remove queue"
-#~ msgstr "Hµng in ë xa"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Néi dung tËp tin cÊu h×nh kh«ng thÓ xuÊt ra ®­îc."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Kh«ng nhËn ra tËp tin cÊu h×nh"
-
-#~ msgid "Adapter"
-#~ msgstr "Adapter"
-
-#~ msgid "Disable network"
-#~ msgstr "T¾t m¹ng lµm viÖc"
-
-#~ msgid "Enable network"
-#~ msgstr "BËt m¹ng lµm viÖc"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ kiÓm tra chuét. Dïng c¸c nót vµ l¨n thö ®Ó kiÓm tra\n"
-#~ "xem ®· tèt ch­a. NÕu ch­a, b¹n cã thÓ nhÊp chuét lªn \"Bá qua\" ®Ó chän\n"
-#~ "driver kh¸c."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "KÕt nèi DSL (hoÆc ADSL)"
-
-#~ msgid "Choose"
-#~ msgstr "Chän lùa"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "B¹n cã thÓ chØ ®Þnh trùc tiÕp URI truy cËp m¸y in b»ng CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "V©ng, h·y in thö ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "V©ng, h·y in thö PostScript"
-
-#~ msgid "Paper Size"
-#~ msgstr "Khæ giÊy"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Nh¶ trang sau khi in?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "C¸c tïy chän driver m¸y in ®a dông "
-
-#~ msgid "Color depth options"
-#~ msgstr "Tïy chän ®é s©u cña mµu"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "In v¨n b¶n b»ng PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Cè ®Þnh v¨n b¶n bËc thang?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Sè trang cho c¸c trang in ra"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "LÒ Ph¶i/Tr¸i theo gi¸ trÞ (1/72 inch)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "LÒ Trªn/D­íi theo gi¸ trÞ (1/72 inch)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "C¸c tïy chän thªm cho GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "C¸c tïy chän thªm cho v¨n b¶n"
-
-#~ msgid "Reverse page order"
-#~ msgstr "§¶o l¹i thø tù trang"
-
-#~ msgid "CUPS starting"
-#~ msgstr "§ang khëi ®éng CUPS"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Chän KÕt Nèi M¸y In ë xa"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Mäi m¸y in ®Òu cÇn cã tªn cho chóng (vÝ dô: lp).\n"
-#~ "C¸c th«ng sè kh¸c nh­ m« t¶ m¸y in hay vÞ trÝ m¸y in cÇn ®­îc\n"
-#~ "®Þnh râ. Tªn nµo nªn dïng cho m¸y in nµy vµ m¸y in nµy\n"
-#~ "®­îc kÕt nèi nh­ thÕ nµo?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Mäi hµng in (n¬i c«ng viÖc in Ên ®­îc göi tíi) cÇn cã\n"
-#~ "mét tªn (th­êng lµ lp) vµ mét th­ môc spool ®i kÌm víi nã.\n"
-#~ "Tªn vµ th­ môc nµo ®­îc sö dông cho hµng in nµy vµ m¸y in ®­îc kÕt nèi "
-#~ "nh­ thÕ nµo?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Tªn hµng in"
-
-#~ msgid "Spool directory"
-#~ msgstr "Th­ môc spool"
-
-#~ msgid "fsck failed: "
-#~ msgstr "fsck háng: "
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "§Ó hÖ thèng b¶o mËt h¬n, b¹n nªn chän \"Dïng tËp tin shadow\" vµ\n"
-#~ "\"Dïng mËt khÈu MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "NÕu m¹ng cña b¹n sö dông NIS, h·y chän \"Dïng NIS\". NÕu kh«ng biÕt, h·y "
-#~ "hái\n"
-#~ "ng­êi qu¶n trÞ m¹ng."
-
-#~ msgid "yellow pages"
-#~ msgstr "Trang vµng"
-
-#~ msgid "Light configuration"
-#~ msgstr "CÊu h×nh Light"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "B¹n muèn kÕt nèi vµo Internet nh­ thÕ nµo?"
-
-#~ msgid "cannot fork: "
-#~ msgstr "kh«ng thÓ ph©n nh¸nh: "
-
-#~ msgid "Configure..."
-#~ msgstr "CÊu h×nh..."
-
-#~ msgid "Lilo/Grub configuration"
-#~ msgstr "CÊu h×nh Lilo/Grub"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "KÝch th­íc ®­îc chän %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "§ang më kÕt nèi..."
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Scrip khëi ®éng nµy thö n¹p c¸c module cho chuét USB cña b¹n"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "CÊu h×nh khu«n thøc khëi ®éng"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "B©y giê kÕt nèi Internet ®· ®­îc cÊu h×nh,\n"
-#~ "m¸y tÝnh cña b¹n cã thÓ cÊu h×nh ®Ó chia sÎ kÕt nèi Internet.\n"
-#~ "L­u ý: b¹n cÇn dµnh ra mét adapter m¹ng ®Ó thiÕt lËp mét m¹ng côc bé "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "B¹n cã muèn thiÕt lËp chia sÎ kÕt nèi Internet kh«ng?\n"
-
-#~ msgid "Welcome to the Internet Connection Sharing utility!"
-#~ msgstr "Chµo mõng tiÖn Ých Chia SÎ KÕt Nèi Internet!"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Tù ®éng kiÓm tra c¸c phô thuéc"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "CÊu h×nh LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "T¹o ®Üa khëi ®éng"
-
-#~ msgid "Format floppy"
-#~ msgstr "Format ®Üa mÒm"
-
-#~ msgid "Choice"
-#~ msgstr "Lùa chän"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "cùc quang ®Ñp ®­êng ch©n trêi"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "cùc quang däc truyÒn thèng "
-
-#~ msgid "gMonitor"
-#~ msgstr "Mµn h×nh GNOME"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ lùa mét sè tïy chän thªm cho hÖ thèng cña b¹n.\n"
-#~ "\n"
-#~ "* Tèi ­u hãa æ ®Üa cøng: tïy chän nµy cã thÓ c¶i thiÖn ho¹t ®éng cña æ "
-#~ "®Üa cøng nh­ng chØ dµnh cho ®èi t­îng ng­êi dïng cao cÊp. Mét sè\n"
-#~ "  chipset cã thÓ lµm háng d÷ liÖu cña b¹n, h·y cÈn thËn. L­u ý lµ kernel "
-#~ "®­îc n¹p danh s¸ch c¸c æ ®Üa vµ chipset, nh­ng nÕu b¹n muèn tr¸nh c¸c\n"
-#~ "  r¾c rèi bÊt ngê cã thÓ x¶y ra, ®õng thiÕt lËp tïy chän nµy.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Chän møc b¶o mËt: b¹n cã thÓ chän møc b¶o mËt tõ hÖ thèng. H·y tham "
-#~ "kh¶o tµi liÖu h­íng dÉn ®Ó hoµn thµnh phÇn nµy.\n"
-#~ "  VÒ c¨n b¶n, nÕu b¹n kh«ng biÕt ph¶i chän nh÷ng g×, h·y ®Æt ë møc mÆc "
-#~ "®Þnh.\n"
-#~ "\n"
-#~ "\n"
-#~ "* KiÓm tra RAM nÕu cÇn: kh«ng cã mét ph­¬ng ph¸p chuÈn mùc nµo ®Ó lÊy "
-#~ "th«ng tin tõ BIOS vÒ kÝch th­íc RAM hiÖn cã trong m¸y tÝnh\n"
-#~ "  cña b¹n. V× vËy, Linux cã thÓ ph¸t hiÖn sai kÝch th­íc ®óng cña RAM. "
-#~ "Trong tr­êng hîp nµy, b¹n cã thÓ\n"
-#~ "  ®Þnh râ kÝch th­íc RAM t¹i ®©y. B¹n cÇn biÕt r»ng, chªnh lÖch tõ 2 ®Õn "
-#~ "4 MB gi÷a l­îng RAM ph¸t hiÖn ®­îc vµ l­îng RAM thùc cã\n"
-#~ "  trong hÖ thèng cña b¹n lµ b×nh th­êng.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Tù ®éng g¾n kÕt ph­¬ng tiÖn th¸o l¾p: nÕu b¹n kh«ng thÝch g¾n kÕt b»ng "
-#~ "tay ph­¬ng tiÖn th¸o l¾p (CD-Rom, æ ®Üa mÒm, æ Zip, v.v...) b»ng viÖc\n"
-#~ "  gâ lÖnh \"mount\" vµ \"umount\", h·y sö dông tïy chän nµy.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Xo¸ th­ môc \"/tmp\" mçi khi khëi ®éng: nÕu b¹n muèn xo¸ tÊt c¶ c¸c tËp "
-#~ "tin vµ th­ môc trong \"/tmp\" khi khëi ®éng hÖ thèng,\n"
-#~ "  h·y dïng tïy chän nµy.\n"
-#~ "\n"
-#~ "\n"
-#~ "* KÝch ho¹t Num Lock lóc khëi ®éng: NÕu b¹n muèn phÝm NumLock ho¹t ®éng "
-#~ "sau, khi khëi ®éng, h·y dïng tïy chän nµy. L­u ý lµ b¹n kh«ng nªn\n"
-#~ "  dïng tïy chän nµy cho c¸c m¸y tÝnh x¸ch tay v× phÝm NumLock cã thÓ ho¹t "
-#~ "®éng hoÆc kh«ng ho¹t ®éng trong X."
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Linh tinh"
diff --git a/perl-install/share/po/wa.po b/perl-install/share/po/wa.po
deleted file mode 100644
index 5a23c4e79..000000000
--- a/perl-install/share/po/wa.po
+++ /dev/null
@@ -1,8823 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# Pablo Saratxaga <pablo@mandrakesoft.com>, 1999-2001
-# Lorint Hendschel <LorintHendschel@skynet.be>, 1999-2001
-# Lucyin Mahin <lucyin@iam.net.ma>, 2000,2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 1999-08-25 11:07+0200\n"
-"Last-Translator: Pablo Saratxaga <pablo@mandrakesoft.com>\n"
-"Language-Team: walon <linux-wa@chanae.alphanet.ch>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "Apontyî totes les waitroûles separemint"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "Eployî l' egztension «Xinerama»"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Apontyî rén kel cåte «%s» (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "Apontiaedje po-z aveur pus d' ene waitroûle"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Li sistinme da vosse sopoite d' eployî pus d' ene\n"
-"waitroûle e minme tins. Ké voloz-ve fé?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Cåte grafike"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Tchwezixhoz ene cåte grafike"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Tchwezixhoz on sierveu X"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "Sierveu X"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Kén apontiaedje di XFree voloz-ve?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Vosse cåte pout aveur del acceleråcion 3D seulmint avou XFree %s.\n"
-"Vosse cåte est sopoirtêye pa XFree %s ki pout aveur on meyeu sopoirt pol 2D."
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Vos ploz eployî l' acceleråcion 3D di vosse cåte videyo avou XFree %s."
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s avou del acceleråcion 3D"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Vos ploz eployî l' acceleråcion 3D di vosse cåte videyo avou XFree86 %s,\n"
-"ASTEME: CI SOPOIRT EST CO ECSPERIMENTÅ ET POUT DJALER VOSSE COPIUTRECE."
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s avou del acceleråcion 3D ECSPERIMENTÅLE"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Vosse cåte pout aveur del acceleråcion 3D seulmint avou XFree %s.\n"
-"ASTEME: CI SOPOIRT EST CO ECSPERIMENTÅ ET POUT DJALER VOSSE COPIUTRECE.\n"
-"Vosse cåte est sopoirtêye pa XFree %s ki pout aveur on meyeu sopoirt pol 2D."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (mineu di håynaedje pol astalaedje)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "Apontiaedje di XFree"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Dijhoz li memwere di vosse cåte grafike"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Tchûzes do sierveu X"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Tchwezixhoz ene waitroûle"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "Waitroûle"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Les deus pus consecantès sacwès, c' est (1) li frécwénce di \n"
-"rafristaedje d' astampé (vertical refresh rate) eyet, co pus impôrtant,\n"
-"li frécwénce di rafristaedje di coûtchî (horizontal refresh rate).\n"
-"\n"
-"Ni tchwezixhoz MÅY ene frécwénce pus foite ki çu ki vosse waitroûle "
-"sopoite,\n"
-"sins cwè vos porîz distrure vosse waitroûle."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "Frécwénce di rafristaedje di coûtchî"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "Frécwénce di rafristaedje d' astampé"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "Waitroûle nén apontieye"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "Cåte grafike nén co apontieye"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "Fintés nén co tchwezeyes"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "Voloz-ve sayî l' apontiaedje?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Loukîz a vos: sayî cisse cåte grafike pout djaler vosse copiutrece"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "Saye di l' apontiaedje"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"sayîz di candjî sacwantès tchûzes"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "I gn yåk ki n' a nén stî:"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Dji va cwiter dvins %d segondes"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "L' apontiaedje est-i totafwait comufåt?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "I gn a yåk ki n' a nén stî, sayîz di candjî sacwantès tchûzes"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "Finté"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Tchwezixhoz li finté et li parfondeu di coleur"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Cåte grafike: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Sierveu XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "Môde sipepieu"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Mostrer tot"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "Fintés"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Sôrte del taprece: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Sôrte di sori: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Éndjin del sori: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Waitroûle: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frécwénce di coûtchî del waitroûle: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Frécwénce d' astampé del waitroûle: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Cåte grafike: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Idéntifiaedje del cåte grafike: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memwere del cåte: %s Ko\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Parfondeu di coleur: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Fintés: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Sierveu XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Mineu di XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "Dj' apresteye l' apontiaedje di X-Window"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Ké voloz-ve fé?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "Candjî waitroûle"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "Candjî cåte grafike"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "Candjî les tchûzes do sierveu"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "Candjî finté"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Mostrer informåcion"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "Sayî co ene feye"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "Cwiter"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Wårder les candjmints?\n"
-"L' apontiaedje do moumint est:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Rintrez di novea dins ene session %s po mete en alaedje les candjmints"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Moussîz foû (logout) et adon siervoz-ve di Ctrl-Alt-Backspace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "Enonder X a l' enondaedje"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Si vos voloz, voste éndjole pout esse metowe dins li môde grafike (dizo X)\n"
-"do côp k' ele s' enonde.\n"
-"Voloz-ve enonder X cwand vos rinondez voste éndjole?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 coleurs (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 meye coleurs (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 meye coleurs (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miyons di coleurs (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miyårds di coleurs (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 Ko"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 Ko"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 Mo ou di pus"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA Standård, 640x480 e 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 e 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Copatibe 8514, 1024x768 e 87 Hz eterlacé (nén 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 e 87 Hz eterlacé, 800x600 e 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA Sitindou, 800x600 e 60 Hz, 640x480 e 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA Nén-Eterlacé, 1024x768 e 60 Hz, 800x600 e 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA Hôte Frécwénce, 1024x768 e 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frécwénce ki pout fé do 1280x1024 e 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frécwénce ki pout fé do 1280x1024 e 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frécwénce ki pout fé do 1280x1024 e 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Waitroûle ki pout fé do 1600x1200 e 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Waitroûle ki pout fé do 1600x1200 e 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "Prumî secteu del pårticion d' enondaedje"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Prumî secteu del plake (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "Astalåcion di SILO"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "Wice ki vos voloz astaler l' enondrece?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "Astalåcion di LILO/grub"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "LILO avou on menu e môde tecse"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "LILO avou on menu grafike"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Enonder a pårti di DOS/Windows (avou loadlin)"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "Maisses tchûzes di l' enondrece"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "Enondrece a-z eployî"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "Astalaedje di l' enondrece"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "Éndjin d' enondaedje"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ni va nén avou des vîs BIOS)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "Compak"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "compak"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Môde videyo"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "Tins divant d' enonder li prémetowe imådje"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "Mot di passe"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "Mot di passe (co ene feye)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "Rastrinde les tchûzes del roye di cmande"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "rastrinde"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "Netyî /tmp a tchaeke rinondaedje"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Grandeu del RAM, s' i fåt (dj' a trové %d Mo)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "Mete multi profils"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "Dinez li grandeu del RAM e Mo"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Li tchûze «Rastrinde les tchûzes del roye di cmande» ni sieve a rén\n"
-"sins mot di passe"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "Sayîz co ene feye"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Les mots di passe sont nén les minmes"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "Messaedje d' enondaedje"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "Tårdjaedje di l' Open Firmware"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "Tårdjaedje po l' enondaedje do nawea"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "Mete en alaedje l' enondaedje pa plake lazer?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "Mete en alaedje l' enondaedje pa l' Open Firmware?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "Prémetou sistinme d' operance?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Vochal les intrêyes.\n"
-"Vos ndè poloz radjouter ou co candjî les cenes k' î sont ddja."
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Radjouter"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Fini"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "Candjî"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "Kéne sôrte d' intrêye voloz-ve radjouter?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "Ôtes sistinmes d' operance (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "Ôtes sistinmes d' operance (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "Ôtes sistinmes d' operance (Windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Imådje"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "Raecene"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "Bouter å coron"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "Lére-sicrire"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "Tåvlea"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "Nén seur"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "Etikete"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "Prémetou"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Grandeu-Initrd"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "NoleVidéyo"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "Bodjî intrêye foû"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "Vos n' poloz avu ene vûde etikete"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Cisse etikete la est ddja eployeye"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Dj' a trové %s eterfaces %s"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "Avoz-ve ene ôte?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Avoz-ve des eterfaces %s?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "Neni"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "Oyi"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Voeyîz les informåcions sol éndjolreye"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Astalant mineu po %s cåte %s"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kéne %s mineuse doe-dje sayî?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"A feyes, li mineuse %s a dandjî d' ene miete di pus d' informåcions po-z\n"
-"aler comufåt, ca bén k' ele va bén sins, normålmint. Voloz-ve diner des\n"
-"informåcions asteure ou leyî li mineuse cachî leye-minme dins voste éndjole\n"
-"après les informåcions k' ele a dandjî? Pa côps, çoula pout fé aroker li\n"
-"copiutrece. Mins ça n' såreut fé nou må."
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "Saye otomatike"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Dijhoz les tchûzes"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "Asteure, vos poloz dner les tchûzes pol module %s."
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Asteure, vos poloz dner les tchûzes pol module %s.\n"
-"Les tchûzes si scrijhèt: « no=valixhance no2=valixhance2... »\n"
-"Metans: « io=0x300 irq=7... »"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Tchûzes do module:"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"I gn a yåk ki n' a nén stî tot tcherdjant li module %s.\n"
-"Voloz-ve sayî co on côp avou des ôtes parametes?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s a stî ddja radjouté)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "Ci mot di passe chal est pår trop simpe"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Dinez on no d' ûzeu, s' i vs plait"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Li no d' ûzeu ni pout aveur ki des ptitès letes, des limerôs, «-» ou «_»"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Ci no d' ûzeu a ddja stî radjouté"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Radjouter ûzeu"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Intrez on ûzeu\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "Accepter l' ûzeu"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "Vré no"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "No di l' ûzeu"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "Imådjete"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "Login otomatike"
-
-#: ../../any.pm_.c:757
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Si vos voloz, voste éndjole pout esse apontieye po fé on login\n"
-"otomatike avou in ûzeu do côp k' ele s' enonde.\n"
-"Si vos n' voloz nén çoula, clitchîz sol boton «Neni»."
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Tchwezixhoz li prémetou ûzeu:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Tchwezixhoz li manaedjeu di purnea a enonder:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "Tchwezixhoz li lingaedje a eployî."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Vos poloz tchwezi des ôtes lingaedjes ki sront disponibes dispôy\n"
-"l' astalåcion po les ûzeus s' endè siervî."
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "Tos"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Wilicome a %s li tchwezixheu do sistinme d' operance a enonder!\n"
-"\n"
-"Tchwezixhoz li sistinme d' operance el djiveye\n"
-"ou taordjiz %d segondes po l' enondaedje premetou.\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Wilicome a GRUB li tchwezixheu do sistinme d' operance a enonder!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Eployiz les tapes %c et %c po mete les intreyes e sorbriyance."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Tapez so Enter po-z enonder li S.O. tchwezi, so 'e' po-z aspougni"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-"les comandes avant d' enonder, ou so 'c' po-z aveur ene roye di comande."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "L' intreye e sorbriyance va esse enondeye otomaticmint dins %d s."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "i gn a nén del plaece assez so /boot"
-
-# I gn a pont di modeye di Microsoft-Windows e walon, adon les nos des
-# ridants sront pår e francès...
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "Bureau"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "Menu Démarrer"
-
-#: ../../bootloader.pm_.c:972
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Vos n' poloz nén astaler l' enondrece so ene pårticion %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "L' aidance n' a nén co stî eplimintêye.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Apontiaedje del sôrte d' enondaedje"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_Fitchî"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Fitchî/Moussî _foû"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Categorijhaedje novea stîle do corwaitoe"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Corwaitoe novea stîle"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Corwaiteu stîle tradicionel"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Corwaiteu stîle tradicionel e Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Enonder Aurora a l' enondaedje del éndjole"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Môde di lilo/grub"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Vos eployîz ddja %s come enondrece po tchwezi\n"
-"li do sistinme d' operance a enonder.\n"
-"Clitchoz so «Apontyî» po-z enonder li macrea d' apontiaedje."
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "Apontyî"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "Môde d' enondaedje"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "Môde do sistinme"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Enonder li sistinme X-Windows a l' enonda di l' éndjole"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "Neni, dji n' vout nén d' otologin"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Oyi, dji vout eployî l' otologin po ci (ûzeu, scribanne) chal"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "I Va"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "Rinoncî"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "dji n' sai drovî /etc/inittab pol lere: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "Yåk n' a nén stî e l' astalaedje di LILO. Vochal l' aroke:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "Go"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "Ko"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "Mo"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "To"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutes"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 minute"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d segondes"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "Fijhoz ene copeye di såvrité divant di tcheryî pus lon."
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Lijhoz avou atincion!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Si vos contez eployî aboot, loukîz di leyî on pô del plaece (avou 2048 \n"
-"secteus, vos froz bén) å cminçmint del plake"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "Aroke"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "Macrea"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "Novea"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "Å lon"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "Pont di montaedje"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Tchûzes"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "Sôrte"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "Dismonter"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "Monter"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Accions"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Vos avoz ene grande pårticion FAT.\n"
-"(normålmint eployeye pa DOS/Windows di Microsoft).\n"
-"Dji vos propôze, d' apreume, di l' raptixhî\n"
-"(clitchîz sol pårticion, et pôy so «Candjî di grandeu»)"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "Clitchîz so ene pårticion s' i vs plait"
-
-#: ../../diskdrake.pm_.c:240
-msgid "Please click on a media"
-msgstr "Clitchîz so on sopoirt s' i vs plait"
-
-#: ../../diskdrake.pm_.c:243
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr ""
-"Clitchîz so on boton chal pa dzeur s' i vs plait\n"
-"\n"
-"Oudobén eployoz «Novea»"
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr "Eployî «Novea»"
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "Po ndè savu d' pus"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Journalised FS"
-msgstr "FS djournalijhî"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Vûde"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Ôte"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Sôrte do sistinme di fitchîs:"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "Askepyî"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Eployî «%s» al plaece"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "Disfacer"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "Eployî «Dismonter» al plaece"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Totes les dnêyes sol pårticion %s vont esse pierdowes dispôy candjî si sôrte."
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Wice voloz-ve monter l' éndjin %s?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "Tchûzes pol montaedje"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "Totès sôrtes"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "Sopoirts bodjåves"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "Candjî l' sôrte"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "Ké sistinme di fitchîs voloz-ve?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "Cwerant après les pårteyes resources NFS"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "Cwerant après les pårteyes resources NFS sol sierveu %s"
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr ""
-"Si l' djîvêye å dzeur n' a pont l' intrêye ki vos vloz, vos l' ploz taper "
-"chal:"
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Sierveu"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "Pårteyès resources"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "Cwerant après les pårteyes resources samba"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "Cwerant après les pårteyes resources samba sol sierveu %s"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "Tchwezixhoz ene pårticion"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Tchwezixhoz ene ôte pårticion"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Moussî foû"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "Candjî pol môde sipepieu"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "Candjî pol môde normå"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "Disfé"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "Voloz-ve vormint continuwer?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "Cwiter sins schaper"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "Moussî foû sins scrire li tåvlea des pårticions?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Voloz-ve wårder les candjmints di /etc/fstab ?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "Grandeu otomatike"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "Tot netyî"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "Co des ôtes"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "Informåcion sol deure plake"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "Nén del plaece assez po fé l' grandeu otomatike"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Totes les pårticions sont ocupêyes"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "Dji n' pou nén radjouter ene pårticion"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Po-z aveur pus d' pårticions, vos dvoz disfacer ene, po poleur askepyî ene "
-"stindowe pårticion"
-
-#: ../../diskdrake_interactive.pm_.c:285
-msgid "Save partition table"
-msgstr "Schaper li tåve di pårtixhaedje"
-
-#: ../../diskdrake_interactive.pm_.c:286
-msgid "Restore partition table"
-msgstr "Rimete li tåve di pårtixhaedje come divant"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "Rapexhî li tåve di pårtixhaedje"
-
-#: ../../diskdrake_interactive.pm_.c:289
-msgid "Reload partition table"
-msgstr "Ritcherdjî li tåve di pårtixhaedje"
-
-#: ../../diskdrake_interactive.pm_.c:293
-msgid "Removable media automounting"
-msgstr "Montaedje otomatike des sopoirts bodjåves"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Tchwezi fitchî"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Li copeye di såvrité del tåve di pårtixhaedje n' a nén li minme grandeu.\n"
-"Doe-dje continuwer tot l' minme?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "Advertixhmint"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Metoz ene plakete dvins li lijheu\n"
-"Totes les dnêyes sol plakete vont esse pierdowes"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "Dji saye di rapexhî li tåve di pårtixhaedje"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "Sipepieuse informåcion"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "Candjî di grandeu"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Bodjî"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "Abwesner"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "Èn alaedje"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "Radjouter å RAID"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "Radjouter å LVM"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "Bodjî foû do RAID"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "Bodjî foû do LVM"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "Candjî l' RAID"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "Eployî po loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "Fé ene novele pårticion"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "Secteu di cminçmint: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "Grandeu e Mo:"
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Sôrte do sistinme di fitchîs: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "Pont di montaedje: "
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Preferince: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-msgid "Remove the loopback file?"
-msgstr "Bodjî li fitchî loopback?"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "Candjî li sôrte del pårticion"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "Discandjî di ext2 a ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Wice voloz-ve monter l' fitchî di loopback %s?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Dji n' såreu dismete li pont di montaedje, ca cisse pårticion est eployeye "
-"pol loopback.\n"
-"Vos dvoz waester li loopback po cmincî."
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "Dji carcule les limites do sistinme di fitchîs FAT"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "Dji candje li grandeu"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "Cisse pårticion ni pout nén candjî si grandeu"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Totes les dnêyes so cisse pårticion chal dvèt esse schapêyes"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Totes les dnêyes sol pårticion %s vont esse pierdowes dispôy raptixhaedje"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Tchwezixhoz li novele grandeu"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "Novele grandeu e Mo: "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "Kéne deure plake voloz-ve bodjî?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "Secteu"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "Å ké secteu voloz-ve aler?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Bodjant"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "Bodjant li pårticion..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Tchwezi on RAID ki egzisteye ddja po î radjouter"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "novea"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Tchwezi on LVM ki egzisteye ddja po î radjouter"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "No do LVM?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Cisse pårticion ni pout nén esse eployeye pol loopback"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "No do fitchî loopback: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-msgid "Give a file name"
-msgstr "Dinez on no d' fitchî"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Ci fitchî chal est ddja eployî d' in ôte loopback. Purdoz e in ôte"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Li fitchî egzisteye ddja. Voloz-ve l' eployî ?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "éndjin"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "livea"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "grandeu des bokets"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "Prindoz asteme: cisse operåcion chal est dandjureuse."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "Kéne sôrte di pårtixhaedje?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Dji rgrete, mins dji n' pou nén fé /boot si lon sol plake (so on cilinde > "
-"1024).\n"
-"Seuye-t i vos eployîz LILO eyet ça n' rotrè nén, seuye-t i vos n' eployîz "
-"nén\n"
-"LILO et vos n' avoz nén dandjî di /boot"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Li pårticion ki vos avoz tchwezi pol ridant raecene (/) est fizicmint\n"
-"hûte do 1024e cilinde del deure plake, eyet vos n' avoz nole pårticion\n"
-"/boot. Si vos vs contez siervî do manaedjeu d' enondaedje lomé LILO, loukîz\n"
-"a vos: vos dvoz radjouter ene pårticion /boot."
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Vos avoz tchwezi ene pårticion RAID e cotûzreye pol pårticion raecene (/).\n"
-"Nole enondrece pout manaedjî çoula sins ene pårticion /boot.\n"
-"Adon pinsoz a radjouter ene pårticion /boot"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Li tåve di pårtixhaedje del plake %s va esse scrite sol plake!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Vos dvoz rinonder voste éndjole po les candjmints esse metous en alaedje"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Totes les dnêyes sol pårticion %s vont esse pierdowes dispôy abwesnaedje"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "Abwesnant"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Abwesnant li fitchî loopback %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Abwesnant li pårticion %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Hide files"
-msgstr "Catchî les fitchîs"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Move files to the new partition"
-msgstr "Bodjî les fitchîs viè l' novele pårticion"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Li ridant %s a ddja sacwantès dnêyes\n"
-"(%s)"
-
-#: ../../diskdrake_interactive.pm_.c:906
-msgid "Moving files to the new partition"
-msgstr "Dji bodje les fitchîs viè l' novele pårticion"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr "Copiant %s"
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, c-format
-msgid "Removing %s"
-msgstr "Dji bodje %s"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "Éndjin: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lete del plake DOS: %s (dji saye d' adviner)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "Sôrte: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "No: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Enondaedje: secteu %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "Grandeu: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s secteus"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "Do cilinde %d å cilinde %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "Abwesneye\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "Nén abwesneye\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "Montêye\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Fitchî(s) loopback:\n"
-"   %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Pårticion prémetowe po-z enonder l' éndjole\n"
-"    (po l' enondaedje di MS-DOS, nén po LILO)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "Livea %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Grandeu des bokets %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Plakes-RAID %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "No do fitchî loopback: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"I gn a des tchances po ki cisse\n"
-"pårticion chal seuye ene pårticion\n"
-"k' i gn a des mineus dvins, vos\n"
-"dvrîz mutwè l' leyî.\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Cisse sipeciåle pårticion\n"
-"d' enondaedje chal c' est po\n"
-"vos poleur tchwezi l' sistinme\n"
-"d' operance a-z enonder cwand\n"
-"vos enondez li copiutrece.\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "Grandeu: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Djeometreye: %s cilindes, %s tiesses, %s secteus\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "Informåcion: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Plakes-LVM %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Sôrte di tåvlea di pårtixhaedje: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "sol bus %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Tchûzes: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s l' abwesnaedje di %s a fwait berwete"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Dji n' sai cmint abwesner %s e sôrte %s"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "li montaedje a fwait berwete"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "li fsck a fwait berwete et rexhou avou on côde %d ou signå %d"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "li montaedje a fwait berwete: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "aroke tot montant %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simpe"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "sierveu"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Vos n' poloz eployî JFS po des pårticions di moens di 32Mo"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Vos n' poloz eployî ReiserFS po des pårticions di moens di 32Mo"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "Les ponts di montaedje dvèt comincî avou on '/'"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "I gn a ddja ene pårticion avou li pont di montaedje %s\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Vos n' poloz nén on volume lodjike LVM pol pont di montaedje %s"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Ci ridant chal doet esse el maisse sistinme di fitchîs"
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"I vos fåt on vré sistinme di fitchîs (ext2, reiserfs) po ci pont di "
-"montaedje chal\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Ene sacwè n' a nén stî come dji droveu %s po î scrire: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ene sacwè n' a nén stî: dji n' a trové nou valåbe éndjin po fé des noveas "
-"sistinmes di fitchîs. Loukîz vos éndjolreyes po savu çu ki n' va nén"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "Vos n' avoz nole pårticion!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux est on sistinme multi-ûzeus, dj' ô bén, tchaeke ûzeu pout aveur\n"
-"on evironmint, des preferinces eyet des fitchîs da lu. Vos ploz lere li\n"
-"«Guide di l' Ûzeu» po ndè savu pus long. Mins, å contråve di «root»,\n"
-"k' est l' administråteu, les ûzeus ki vos aloz radjouter chal n' åront\n"
-"nén l' droet di candjî ene sacwè so l' éndjole apu k' les fitchîs eyet\n"
-"apontiaedjes da zels. Vos dvroz fé pol moens on ûzeu normå po vos minme.\n"
-"Ci conte ûzeu la c' est po moussî el copiutrece po l' eployaedje di tos\n"
-"les djoûs. Minme si çoula sonle ahessåve di moussî tofer come «root»,\n"
-"c' est ossu ene sacwè di foirt dandjureu! Li pus ptite måcule pout\n"
-"signifyî kel sistinme da vosse ni rotrè gote pus. Si vos fjhoz ene\n"
-"consecante aroke come on ûzeu normå, li pé ki vs pout ariver c' est di\n"
-"piede sacwants fitchîs et informåcions, mins nén li sitinme en etîr.\n"
-"\n"
-"D' apreume, vos dvoz dner vosse no. C' est nén obligatwere, bén seur - et\n"
-"vos ploz bén î mete çu k' vos vloz. DrakX irè adon prinde li prumî mot ki\n"
-"vos avoz tapé eyet l' paser el tchamp «No di l' ûzeu». Ci no la c' est\n"
-"l' no ki l' éndjole vos cnoxhe; çu ki vos dvoz taper el purnea di bénvnowe\n"
-"po moussî el copiutrece. Vos l' poloz candjî. Vos ploz mete çu k' vos vloz\n"
-"mins di moens di ût letes; et rén ki des ptitès letes, sins accints ou des\n"
-"chifes, li loyeure («-») ou li sene sorlignî («_»).\n"
-"Après çoula, vos dvoz taper vosse sicret. Li scret d' on ûzeu normå, sins\n"
-"priviledjes sipeciås n' est nén ossu important kel ci da «root», do pont\n"
-"d' vuwe del såvrité, mins c' est totlminme nén ene råjhon po n' nén\n"
-"fé atincion ås screts des ûzeus - c' est vos fitchîs ki sont-st e risse.\n"
-"\n"
-"Si vos clitchoz so «Accepter l' ûzeu» l' ûzeu srè radjouté po d' bon avou\n"
-"les informåcions ki vs avoz dné, et les tchamps sront vûdîs po vos pleur\n"
-"e radjouter on ôte. Vos e ploz radjouter ottant ki vos vloz: onk po tchaeke\n"
-"di vos soçons, po vosse pére, vosse soûr, par egzimpe. Cwand vos avoz fini\n"
-"d' endè radjouter, clitchoz so «Fini».\n"
-"\n"
-"Si vos clitchoz sol boton «Sipepieus» vos ploz candjî li shell esployî pa\n"
-"cist ûzeu la (li prémetou shell est li «bash»)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Chal pa dzeur i gn a ene djîvêye des pårticions Linux k' i gn a so vosse\n"
-"deure plake et ki on stî detectêyes. Vos ploz wårder les tchûzes fwaites\n"
-"pa l' macrea, ele sont comufåt po les cas les pus comons.\n"
-"Si vos les voloz candjî vos dvoz fé å moens ene pårticion raecene («/»).\n"
-"Ni prindoz nén ene trop ptite grandeu ôtrumint vos n' pôrîz astaler "
-"åjheymint\n"
-"des programes, fåte di plaece. Si vos vloz mete vos dnêyes so ene pårticion\n"
-"diferinne, vos dvroz ossu fé ene po «/home» (çu ki vos poroz fé seulmint si\n"
-"vos avoz pus d' ene pårticion del sôrte Linux).\n"
-"\n"
-"Pol informåcion, tchaeke pårticion est mostrêye come çoula: «no», "
-"«grandeu».\n"
-"\n"
-"Li «no» est construt come çouchal: «sôrte del deure plake» + «limerô del "
-"deure plake» +\n"
-"«limerô del pårticion» (par egzimpe, hd+a+1 --> «hda1»)\n"
-"\n"
-"Li «sôrte del deure plake» est «hd» si vosse deure plake est del sôrte IDE,\n"
-"oudobén «sd» si elle est del sôrte SCSI.\n"
-"\n"
-"Li «limerô del deure plake» est todi ene lete pa drî «hd» ou «sd».\n"
-"Avou les plakes IDE on a:\n"
-"\n"
-"   * «a» pol plake maisse sol prumî controleu IDE,\n"
-"\n"
-"   * «b» pol plake esclave sol prumî controleu IDE,\n"
-"\n"
-"   * «c» pol plake maisse sol deuzinme controleu IDE,\n"
-"\n"
-"   * «d» pol plake esclave sol deuzinme controleu IDE.\n"
-"\n"
-"\n"
-"Avou les plakes SCSI, «a» vout dire «prumîre deure plake», «b» vout dire "
-"«deuzinme deure plake», evnd..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"L' astalaedje del distribucion Mandrake Linux a si telmint di pacaedjes\n"
-"k' il a bén falou les mete so sacwantes plakes lazer. DrakX sét si on\n"
-"pacaedje k' a stî tchwezi est so ene ôte plake lazer, et i drovrè\n"
-"l' lijheu di plakes lazer po vos l' candjî et mete li çu k' i fåt."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Asteure c' est l' moumint di specifyî kés programes ki vos vloz astaler\n"
-"so voste éndjole. I gn a des meyes et des meyes di pacaedjes pol Mandrake\n"
-"Linux, eyet vos n' estoz nén supozé les cnoxhe tos.\n"
-"\n"
-"Si vos fjhoz on astalaedje sitandård a pårti d' ene plake lazer, i vos srè\n"
-"dmandé d' apreume di dire les CDs ki vos avoz. Loukîz les etiketes k' i\n"
-"gn a so les plakes lazer et noerixhoz les boesses ki corespondèt ås cis\n"
-"k' vos avoz. Clitchoz so «I va» cwand vos estoz presse a continouwer.\n"
-"\n"
-"Les pacaedjes sont metous dins des groupes corespondant a des ûzaedjes\n"
-"ki porént esse fwaits. Les groupes zels minmes sont metous dins cwate\n"
-"grandès seccions:\n"
-"\n"
-" * «Posse éndjolrece»: si vos tûzoz a-z eployî voste éndjole come on posse\n"
-"éndjolrece (dj' ô bén: on ûzaedje personel, å contråve d' on ûzaedje\n"
-"come sierveu metans), adon tchwezixhoz onk ou plusieurs des groupes\n"
-"corespondants.\n"
-" * «Evironmint grafike»: chal c' est wice ki vos aloz tchwezi vosse\n"
-"evironmint grafike favori. I fåt ndè tchwezi pol moens onk si vos vloz\n"
-"on posse éndjolrece avou ene eterface grafike!\n"
-"\n"
-" * «Programaedje»: si l' éndjole va-z esse eployeye po programer,\n"
-"tchwezixhoz li/les groupe(s) ki vos vloz chal.\n"
-"\n"
-" * «Sierveu»: al fén, si l'såme di l' éndjole c' est d' esse on sierveu,\n"
-"vos poroz les kés siervices vos vloz voer astalés so l' éndjole.\n"
-"\n"
-"Cwand vos aloz avou l' sori å dzeu do no d' on groupe, ene racsegne srè\n"
-"håynêye avou on coûrt discrijhaedje di çu a cwè i pout siervî.\n"
-"\n"
-"Si vos clitchoz sol boton «Sipepieus» vos åroz l' tchûze «Tchwezi tchaeke\n"
-"pacaedje separemint». C' est ahessåve si vos cnoxhos on pô les pacaedjes\n"
-"k' i gn a et çu ki vos vloz; oudobén si vos vloz on contrôle totå so çu\n"
-"ki srè astalé ou nén.\n"
-"\n"
-"Si vos cmincîz l' astalaedje e môde «Metaedje a djoû», vos ploz disclitchî\n"
-"tos les groupes po nén aveur de noveas pacaedjes d' astalés, seulmint les\n"
-"cis k' vos avîz ddja davance sront astalés. Çouchal est ahessåve po\n"
-"reparer ou mete a djoû on sistinme k' est ddja sol deure plake."
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"Asteure, vos poloz bén tchwezi les kés siervices ki s' divèt mete en "
-"alaedje\n"
-"cwand c' est ki vosse copiutrece s' enonde.\n"
-"\n"
-"Chal sont prezintés tos les siervices k' i gn a el astalåcion do moumint.\n"
-"Prindoz sogne delzès verifyî et disclitchîz les cis k' i gn enn a pont\n"
-"tofer mezåjhe a l' enondaedje.\n"
-"\n"
-"Cwand vosse sori passe å dzeu d' on siervice, ene racsegne aparet po\n"
-"vos dire çu ki l' siervice fwait. Si vos n' estoz nén seur si on siervice\n"
-"est ahessåve por vos ou nén, vos estoz todi a houte tot l' leyant a si\n"
-"prémetowe valixhance.\n"
-"\n"
-"Loukîz a vosse sogne si voste éndjole serè eployeye come sierveu: c' est\n"
-"dandjureu mî di n' nén enonder les siervices ki vos n' avoz nén dandjî!"
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux comprind les eures GMT («Greenwich Mean Time») eyet les\n"
-"rmete dins l' eure di vosse payis, come vos avoz tchwezi."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Li prumî côp ki vos alez sayî l' apontiaedje di X, i s' pout k' i n' vs\n"
-"åye nén (waitroûle trop ptite, imådje rideye viè l' droete ou\n"
-"l' hintche...). C' est l' råjhon ki DrakX vos dmande, minme cwand X a stî\n"
-"enondé comufåt, si vos estoz d' acoird avou l' apontiaedje. I vos propozrè\n"
-"eto del candjî, tot vs mostrant ene djîvêye des môdes di håynaedje valides\n"
-"ki vos ploz tchwezi po voste cåte vidéyo.\n"
-"\n"
-"Come dierinne solucion, si vos n' arivez todi nén a fé aler X, tchwezixhoz\n"
-"«Candjî cåte grafike», tchwezixhoz «Unlisted», eyet cwand on vos dmandrè\n"
-"li ké sierveu X ki vos vloz, prindoz li «FBDev». C' est ene tchûze ki\n"
-"rotré avou bråmint di cåtes vidéyo modienes. Tchezixhoz «Sayî co ene feye»\n"
-"po-z esse seur."
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Al fén, on vos dmandrè si vos vloz kel eterface grafike seuye en alaedje\n"
-"cwand l' éndjole est enondêye. Notez k' cisse kesse vos srè fwaite minme\n"
-"si vos tchwezixhoe di n' nén sayî l' apontiaedje del cåte vidéyo.\n"
-"Bén seur, si voste éndjole va-st ovrer come on sierveu, ou si vos n' arivez\n"
-"nén a-z apontyî l' cåte vidéyo, vos ploz risponde «Neni»."
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"Asteure, vos dvoz tchwezi wice ki vos vloz astaler vosse sistinme\n"
-"d' operance Mandrake Linux so vosse deure plake. Si l' plake est vûde,\n"
-"ou si les sistinmes d' operance k' i gn a ddja prindèt tote li plaece,\n"
-"vos avoz mezåjhe del pårti. Fé on pårtixhaedje d' ene deure plake çoula\n"
-"vout dire del pårti lodjicmint po fé del plaece po-z astaler vosse novea\n"
-"sistinme Mandrake Linux.\n"
-"\n"
-"Come, on côp ki li pårtixhaedje est fwait, on n' sait rivni en erî\n"
-"(normålmint), les apurdisses ont sovint sogne ou peu di s' enonder.\n"
-"Awoureuzmint, i gn a on macrea ki vs aidrè po l' fé.\n"
-"Tapez on côp d' ouy sol documintåcion et purdoz vosse tins.\n"
-"\n"
-"Si vos avoz enondé l' astalaedje e môde sipepieus, vos alez intrer el\n"
-"usteye di pårtixhaedje di Mandrake Linux: li DiskDrake. Avou lu vos ploz\n"
-"apontyî foirt sipepieuzmint vos pårticions. Loukîz å tchaptrea so DiskDrake\n"
-"del documintåcion k' esplike kimint l' eployî comufåt. Vos ploz ossi\n"
-"eployî les macreas, po çoula clitchoz sol boton «Macrea» del usteye di "
-"pårtixhaedje.\n"
-"\n"
-"Si les pårticions ont ddja stî fwaites (d' on astalaedje fwait d' avance\n"
-"oudobén avou ene ôte usteye di pårtixhaedje), i sufit di tchwezi\n"
-"ces pårticions la po les eployî pol astalaedje di vosse sistinme GNU/Linux.\n"
-"\n"
-"Si les pårticions n' ont nén ddja stî fwaites, vos les dvoz askepyî.\n"
-"Po fé çoula, eployîz l' macrea k' i gn a chal pa dzeur. Sorlon "
-"l' apontiaedje\n"
-"di vosse deure plake, plusieurès solucions sont possibes:\n"
-"\n"
-"* Eployî l' plaece libe: çouchal frè tot simplumint on pårtixhaedje\n"
-"  otomatike del plaece vûde so les deures plakes da vosse;\n"
-"  vos n' avoz a vos prewocuper di rén après.\n"
-"\n"
-"* Eployî les pårticions k' i gn a: li macrea a detecté ene ou pus di\n"
-"  pårticions Linux k' egzistèt ddja so vosse deure plake.\n"
-"  Si vos les vloz wårder, prindoz cisse tchûze chal. \n"
-"\n"
-"* Eployî l' plaece libe sol pårticion Windows: si Microsoft Windows est\n"
-"  astalé so vosse deure plake et s' i prind tote li plaece k' i gn a,\n"
-"  vos dvoz fé del plaece libe po les dnêyes di Linux. Po çoula vos ploz\n"
-"  disfacer li pårticion Microsoft Windows et totes ses dnêyes (voeyoz les\n"
-"  solucions «Disfacer li plake etîre» ou «Môde sipepieu») oudobén raptixhî\n"
-"  vosse pårticion Microsoft Windows.\n"
-"  Li candjmint d' grandeu des pårticions si pout fé sins piede des dnêyes.\n"
-"  Cisse solucions est rcomindêye si vos vloz eployî Mandrake Linux et\n"
-"  Microsoft Windows sol minme copiutrece.\n"
-"\n"
-"  Divant di tchwezi cisse solucion, i vos fåt comprinde kel grandeu di "
-"vosse\n"
-"  pårticion Microsoft Windows srè pus ptite ki çu k' ele est asteure.\n"
-"  Dj' ô bén, vos åroz moens di plaece libe so Microsoft Windows po wårder\n"
-"  les dnêyes da vosse ou astaler des noveas programes.\n"
-"\n"
-"* Disfacer li plake etîre: si vos vloz disfacer totes les dnêyes k' i gn a\n"
-"  so vosse deure plake po mete el plaece li sistinme Mandrake Linux,\n"
-"  vos ploz tchwezi cisse tchûze chal.\n"
-"  Prindoz asteme k' avou cisse solucion chal vos n' poroz nén rivni en erî\n"
-"  on côp ki vos avez acertiné vosse tchûze.\n"
-"\n"
-"  !! Avou cisse tchûze chal, totes les dnêyes del deure plake sront "
-"pierdowes !!\n"
-"\n"
-"* Bodjî Windows(tm) foû: çouchal va simplumint disfacer ttafwait sol\n"
-"  deure plake eyet cmincî on novea pårtixhaedje. Totes les dnêyes sol\n"
-"  deure plake vont esse pierdowes.\n"
-"\n"
-"  !! Avou cisse tchûze chal, Tot çu k' i gn a el deure plake srè "
-"pierdou. !!\n"
-"\n"
-"* Môde sipepieu: si vos vloz fé manuwelmint li pårtixhaedje del deure "
-"plake,\n"
-"  vos ploz tchwezi çouchal. Mins prindez asteme, avou cisse solucion chal\n"
-"  vos poroz fé es poûxhantès mins dandjureusès sacwès.\n"
-"  Vos ploz åjheymint piede totes vos dnêyes. Adon, ni tchwezixhoz nén\n"
-"  çouchal, a moens di vormint saveur çu k' vos fjhez."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Vosse novea sistinme d' operance Mandrake Linux s' astale pol moumint.\n"
-"Sorlon li nombe di pacaedjes ki vos avoz prindou eyet l' roedeu del\n"
-"copiutrece da vosse, ciste operåcion pout n' prinde ki sacwantès munutes\n"
-"oudobén on consecant hopê d' tins.\n"
-"\n"
-"Tårdjîz on pô s' i vs plait."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"Divant d' aler pus avant, vos dvrîz lere atintivmint l' licince.\n"
-"Ele covere li distribucion Mandrake Linux, si vos n' estoz nén d' acoird\n"
-"avou les termes del licince, clitchoz sol boton «Nén accepter». Çoula\n"
-"aresteyrè pår l' astalaedje. Po continouwer avou l' astalaedje clitchoz\n"
-"sol boton «Accepter»."
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Chal, c' est po tchwezi l' livea di såvrité ki vos vloz po voste éndjole.\n"
-"Ene rîle simpe c' est ki pus voste éndjole est egzposêye, pus les dnêyes\n"
-"k' i gn a å dvins sont impôrtantes, pus li livea di såvrité doet esse hôt.\n"
-"Mins ossu, on hôt livea di såvrité çoula vout dire ki c' est moens åjhey\n"
-"d' eployî li copiutrece. Lijhoz li tchaptrea so MSEC el\n"
-"«Manuel di Referince» po-z aveur pus d' informåcions so les diferins\n"
-"liveas k' i gn a.\n"
-"\n"
-"Si vos n' savoz cwè tchwezi, leyîz li prémetou livea."
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Chal, vos dvoz tchwezi so kéne/kénès pårticion(s) ki vos voloz astaler\n"
-"vosse sistinme Mandrake Linux. Si vos pårticions ont ddja stî fwaites\n"
-"(p. egz. li dierin côp ki vos avoz astalé GNU/Linux ou bén avou ene ôte\n"
-"usteye di pårtixhaedje). Dins les ôtes cas, des pårticions dvèt esse \n"
-"defineyes so vosse deure plake. Ça vout dire ki vos alez dispårti\n"
-"lodjicmint li deure plake di voste éndjole e diferinnes coines separêyes\n"
-"di ene l' ôte.\n"
-"\n"
-"Po fé les pårticions, vos dvoz d' apreume tchwezi li plake a pårti e\n"
-"clitchant so «hda» pol prumîre plake IDE, «hdb» pol deuzinme, «sda» pol \n"
-"prumîre plake SCSI, et vos nd åroz.\n"
-"\n"
-"Pol pårtixhaedje del deure plake tchwezeye, vos ploz prinde ene di ces\n"
-"tchûzes chal:\n"
-"\n"
-"   * Tot netyî: cisse tchûze va disfacer totes les pårticions k' i gn a\n"
-"     sol tchwezeye deure plake.\n"
-"\n"
-"   * Grandeu otomatike: cisse tchûze va fé des pårticions Ext2 pol sistinme\n"
-"     et ene di swap e prindant li plaece di libe k' i gn a sol deure plake\n"
-"     et carculant otomaticmint li grandeu li meyeuse.\n"
-"\n"
-"   * Rapexhî li tåve di pårtixhaedje: si vosse tåve di pårtixhaedje est\n"
-"     crombe, vos ploz sayî del rapexhî avou cisse tchûze chal. Prindoz\n"
-"     asteme et rimimbroz-ve ki çoula pout ni nén roter a tos les côps.\n"
-"\n"
-"   * Disfé: clitchoz so ci boton la po disfé tos vos candjmints.\n"
-"\n"
-"   * Ritcherdjî: Cisse tchûze chal c' est si vos vloz disfé tos les\n"
-"     candjmints et tcherdjî vosse tåve di pårtixhaedje di dpårt.\n"
-"\n"
-"   * Macrea: Si vos vloz aveur l' aidance d' on macrea po fé li "
-"pårtixhaedje\n"
-"     del deure plake, vos ploz tchwezi cisse tchûze chal.\n"
-"     Ele est ricomandêye si vos n' estoz nén on spepieu e pårtixhaedje.\n"
-"\n"
-"   * Rifé a pårti d' ene plakete: si vos avîz schapé vosse tåve di\n"
-"     pårtixhaedje dins ene plakete å moumint d' ene ôte astalåcion,\n"
-"     vos l' poloz rapexhî avou cisse tchûze chal.\n"
-"\n"
-"   * Schaper e ene plakete: si vos vloz schaper vosse tåve di pårtixhaedje\n"
-"     dins ene plakete, ki vos poroz eployî pus tård pol rapexhî.\n"
-"     C' est bråmint ricomande del fé.\n"
-"\n"
-"   * Fwait: on côp ki vos avoz fini li pårtixhaedje del deure plake,\n"
-"     tchwezixhoz çouchal po schaper po d' bon les candjmints.\n"
-"\n"
-"Note: vos ploz tot fé pår avou l' taprece: naivyîz d' ene pårticion\n"
-"a l' ôte avou li tape Tab et les fretches Up/Down.\n"
-"\n"
-"Cwand ene pårticion a stî tchwezeye, vos poloz fé:\n"
-"\n"
-"     * (*)(*)  po fé ene novele pårticion (cwand c' est ene vûde pårticion\n"
-"               k' a stî tchwezeye)\n"
-"\n"
-"     * (*)(*)  po disfacer li pårticion\n"
-"\n"
-"     * (*)(*)  po defini li pont di montaedje\n"
-"\n"
-"si vos alez astaler sor ene éndjole PPC, mutwè ki vos voroz fé ene pitite "
-"pårticion HFS «d' enondaedje» di 1 Mo å moens\n"
-" pol eployî avou l' enondrece «yaboot». Si vos decidez del fé on pô pus "
-"grande, par egzimpe 50 Mo, çoula poreut fé\n"
-"ene clapante plaece po-z î mete on nawea et ene imådje ramdisk po des cas "
-"d' urdjince k' i gn åreut."
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Chal pa dzeur i gn a ene djîvêye des pårticions Windows k' i gn a so vosse\n"
-"deure plake et ki on stî detectêyes. Tchwezixhoz li cene ki vos vloz\n"
-"candjî si grandeu, s' i vs plait.\n"
-"\n"
-"Pol informåcion, tchaeke pårticion est mostrêye come çoula:\n"
-"«no Linux», «no Windows», «grandeu».\n"
-"\n"
-"Li «no Linux» est construt come çouchal:\n"
-"«sôrte del deure plake» + «limerô del deure plake» +\n"
-"«limerô del pårticion» (par egzimpe, hd+a+1 --> «hda1»)\n"
-"\n"
-"Li «sôrte del deure plake» est «hd» si vosse deure plake est del sôrte IDE,\n"
-"oudobén «sd» si elle est del sôrte SCSI.\n"
-"\n"
-"Li «limerô del deure plake» est todi ene lete pa drî «hd» ou «sd».\n"
-"Avou les plakes IDE on a:\n"
-"\n"
-"   * «a» pol plake maisse sol prumî controleu IDE,\n"
-"\n"
-"   * «b» pol plake esclave sol prumî controleu IDE,\n"
-"\n"
-"   * «c» pol plake maisse sol deuzinme controleu IDE,\n"
-"\n"
-"   * «d» pol plake esclave sol deuzinme controleu IDE.\n"
-"\n"
-"\n"
-"Avou les plakes SCSI, «a» vout dire «prumîre deure plake», «b» vout dire "
-"«deuzinme deure plake», evnd...\n"
-"\n"
-"Li «no Windows» est li lete ki Windows eploye po-z idéntifyî li pårticion\n"
-"(par egzimpe li prumîre pårticion Windows del prumîre deure plake est\n"
-"lomêye «C:»)."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-"Tårdjîz on pô s' i vs plait. Cisse operåcion pout prinde sacwantès minutes."
-
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"Asteure DrakX a mezåjhe di saveur si vos vloz fé li prémetou («Consyî»)\n"
-"astalaedje oudobén si vos vloz aveur pus di contrôle («Sipepieus»). Vos "
-"ploz\n"
-"ossi tchwezi di fé on novea astalaedje oudobén on metaedje a djoû d' on\n"
-"sistinme Mandrake Linux dedja astalé.\n"
-"\n"
-"Tchwezixhoz «Astalaedje» s' i gn a nole modêye di Mandrake Linux sol deure "
-"plake,\n"
-"ou si vos vloz tchwezi inte sacwants sistinmes d' operance a l' enondaedje.\n"
-"\n"
-"Tchwezixhoz «Metaedje a djoû» si vos voloz mete a djoû ou rapexhî ene "
-"modêye\n"
-"dedja astalêye di Mandrake Linux.\n"
-"\n"
-"Sorlon vosse livea di cnoxhance do sistinme GNU/Linux, vos ploz tchwezi onk "
-"des liveas shûvants\n"
-"po astaler ou mete a djoû vosse sistinme d' operance Mandrake Linux:\n"
-"\n"
-"* Consyî: si vos n' avoz co måy astalé GNU/Linux.\n"
-"L' astalaedje srè foirt åjhey et vos n' åroz ki sacwantès kesses a "
-"risponde.\n"
-"\n"
-"* Sipepieus: si vos estoz in espert di GNU/Linux eyet ki vos voloz en\n"
-"astalaedje tot etîr a vosse môde, cisse tchûze chal est por vos!\n"
-"Vos poroz tchwezi li sôrte d' astalaedje sorlon çu ki vos vloz fé avou\n"
-"voste éndjole del minme manîre k' avou «A vosse môde».\n"
-"Çoula pout esse målåjhey di rsponde a des kesses k' i gn a si vos n' avoz "
-"nén\n"
-"ene grande conoxhance di GNU/Linux. Adon ni tchwezixhoz cisse classe\n"
-"d' astalaedje chal si vos n' savoz nén çu ki vos fjhoz."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normålmint, DrakX va tchwezi li bone taprece por vos (sorlon l' lingaedje\n"
-"ki vos avoz tchwezi) et vos n' voeroz mutwè nén ciste étape. Mins,\n"
-"i s' pout ki vos åyoxhe ene taprece diferinne: par egzimpe, ene djin\n"
-"ki djåzreut inglès mins vicreut el Swisse, ele voreut cwand minme ene\n"
-"swisse taprece. Oudobén si vos avoz tchwezi l' walon mins ki vos avoz\n"
-"ene taprece francesse ou qwerty purade k' ene taprece belje. Dins les\n"
-"deus cas, vos dvroz aler en erî disk' al ciste étape d' astalaedje, eyet\n"
-"tchwezi li bone taprece foû del djîvêye.\n"
-"\n"
-"Clitchoz so «Co des ôtes» po-z aveur li djîvêye etîre di totes les tapreces\n"
-"ki sont sopoirtêyes."
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-"Tchwezixhoz l' linaedje ki vos vloz eployî po l' astalaedje et come\n"
-"prémetou lingaedje do sistinme.\n"
-"\n"
-"Si vos clitchoz so «Sipepieus» vos poroz tchwezi d' aveur do sopoirt po\n"
-"ds ôtes lingaedjes avou. Cwand vos tchwezixhoz on ôte lingaedje les\n"
-"fitchîs specifikes po ci lingaedje la (ratoîurnaedjes, aidance,\n"
-"documintåcions, coridjeus,...) sront astalés. Par egzimpe, si vos aloz\n"
-"aveur so voste éndjole on ûzeu ki vént del Sipagne, clitchoz sol sitoele\n"
-"corespondant a «Spanish|Spain».\n"
-"\n"
-"Notez ki vos ploz astaler li sopoirt po bråmint des lingaedjes, si vos les\n"
-"vloz tos (tos les cis sopoirtés pol moumint, come di djusse), clitchoz sol\n"
-"sitoele «Tos» al difén del djîvêye. Cisse tchûze la est ahessåve po ene\n"
-"éndjole ki srè eployeye pa des djins di totlminme ké payis.\n"
-"\n"
-"On côp ki vos avoz tchwezi les locåles ki vos vloz, clitchoz so «I va» po\n"
-"passer a l' étape shûvante."
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-"DrakX, si on lî dit rén, pinsrè ki vos avoz ene sori di deus botons, et\n"
-"va mete en alaedje l' emulåcion do troezinme boton. DrakX sårè\n"
-"otomaticmint si vosse sori est ene sori PS/2, séreye oudobén USB.\n"
-"\n"
-"Si vos vloz defini ne sôrte di sori diferinne, tchwezixhoz li sôrte\n"
-"k' i fåt el djîvêye.\n"
-"\n"
-"Si vos fjhoz ene tchûze diferinne del prémetowe, DrakX vos mosterrè on\n"
-"purnea po sayî l' sori. Sayîz les botons et li rôlete po vey si tot va\n"
-"comufåt. Si l' sori ni rote nén comufåt, tapez so l' espace, oudobén\n"
-"so RETURN ou clitchî so «Rinoncî» po ndè tchwezi ene ôte."
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"Tchwezixhoz li bon pôrt.  Metans: li pôrt COM1 dzo MS Windows si lome\n"
-"ttyS0 dzo GNU/Linux."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader, ou enondrece di GNU/Linux) eyet Grub siervèt a enonder\n"
-"GNU/Linux ou tot l' minme li kén ôte sistinme d' operance k' i gn åreut\n"
-"so voste éndjole.  Normålmint, les ôtes sistinmes d' operance\n"
-"sont foirt bén ricnoxhous et astalés.  Si ça n' va nén tot seu, vos poloz\n"
-"radjouter ene intrêye al mwin dins cisse pådje ci.  Loukîz do dner les\n"
-"bons parametes, seulmint. \n"
-"\n"
-"Vos poloz eto tchwezi di n' nén leyî tot l' minme kî enonder ces sistinmes\n"
-"d' operance la.  Mins a ç' moumint la, i vos fårè ene plakete d' enondaedje\n"
-"(boot disk) po ls enonder."
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Veci, vos dvoz dire wice ki vos voloz mete\n"
-"l' informåcion ki GNU/Linux end a mezåjhe po s' enonder.\n"
-"\n"
-"Tchwezixhoz «Prumî secteu del plake (MBR)»... a pus ki vos\n"
-"sårîz foirt bén çu ki vos fjhoz."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX va cweri après on/des éndjins IDE so vosse copiutrece. I va ossi\n"
-"cweri après ene/des cåte(s) SCSI e PCI. Si ene cåte SCSI est trovêye\n"
-"DrakX va-st astaler otomaticmint li mineu k' i gn a mezåjhe.\n"
-"\n"
-"Come pa des côps li deteccion del éndjolreye ni sait nén trover ene sacwè\n"
-"DrakX vos dmandrè si vos avoz ene cåte PCI SCSI ou nén. Clitchoz so «Oyi»\n"
-"si vos savoz k' i gn en a ene so l' éndjole. Ene djîvêye di mineu serè\n"
-"håynêye po ki vos poloxhe tchwezi li mineu ki convint.\n"
-"Clitchoz so «Neni» si vos n' avoz nole cåte SCSI.\n"
-"Si vos n' estoz nén seur vos ploz loukî al djîvêye di l' éndjolreye k' a\n"
-"stî trovêye e voste éndjole, po çoula clitchoz sol boton «Voeyîz les\n"
-"informåcions sol éndjolreye».\n"
-"\n"
-"Si vos dvoz tchwezi manuwelmint vosse mineu, DrakX vos dmandrè si vos voloz\n"
-"mete des tchûzes por lu. Mins po cmincî, leyîz li mineu rconoxhe tot seu\n"
-"voste éndjolreye: d' acostumance, ça va tot seu.\n"
-"\n"
-"Si ça n' va nén tot seu, vos dvroz dner les informåcions pol mineu "
-"manuwelmint.\n"
-"Waitîz d' obtini tos les racsegnmints dins li documintåcion (el tchaptrea "
-"3,\n"
-"seccion «Ramexhner des informåcions sol éndjolreye») po des racsegnes so\n"
-"cmint ramexhner les parametes k' i gn a mezåjhe foû del documintåcion\n"
-"ki vént avou l' éndjin, del waibe do costrujheu (si vos avoz on accès\n"
-"al rantoele daegnrece) ou a pårti di Windows (si vos avoz Windows d' astalé)."
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Tchwezixhoz li deure plake ki vos vloz disfacer po-z î astaler vosse\n"
-"novele pårticion Mandrake Linux. Prindoz asteme, totes les dnêyes\n"
-"k' i gn a sol deure plake vont esse pierdowes, et vos n' poroz les rapexhî."
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Clitchoz so «I va» si vos vloz disfacer totes les dnêyes et totes les\n"
-"pårticions k' i gn a so vosse deure plake.\n"
-"Prindoz asteme, dispôy aveur clitchî so «I va», vos n' poroz pus rapexhî\n"
-"nole dinêye ou pårticion k' i gn aveut sol deure plake, nerén les cis\n"
-"da Windows.\n"
-"\n"
-"Clitchoz so «Rinoncî» po rinoncî a cisse operåcion, et leyî les dnêyes\n"
-"et les pårticions come ele estint sol deure plake."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-"Dji n' sai trover les modules ki corespondèt a vosse nawea\n"
-"(i gn a pont di fitchî %s)"
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Vos avoz tchwezi le(s) sierveu(s) shûvant(s): %s\n"
-"\n"
-"\n"
-"Ces sierveus sront activés a l' enondaedje del éndjole. I n' ont nén\n"
-"di probleme di såvrité cnoxhou, mins i s' poreut k' onk seuye trové el "
-"futur.\n"
-"Dins ç' cas, vos dvroz a tot côp mete a djoû li pacaedje po esse a houte\n"
-"des problemes.\n"
-"\n"
-"\n"
-"Volez-ve vormint astaler ces sierveus?\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Dji n' pout eployî li broadcast sins dominne NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Metoz ene plakete FAT-abwesnêye divins li lijheu %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Cisse plakete chal n' a nén stî abwesnêye e FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Po-z eployî cisse tchûze di pacaedjes k' a stî schapêye, enondez "
-"l' astalaedje avou «linux defcfg=floppy»"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Yåk n' a nén stî come dji sayîve di lere li fitchî %s"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "I va"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Vos avoz del éndjolreye k' a mezåjhe di mineus «proprietaire» po roter\n"
-"Vos trovroz del informåcion so zels so: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Vos dvoz aveur ene pårticion raecene.\n"
-"Po çoula, fijhoz ene pårticion (ou clitchoz so ene ki egzisteye ddja).\n"
-"Et pôy tchwezixhoz «Pont di montaedje» et metoz-lu come «/»"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Vos dvoz aveur ene pårticion di swap"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Vos n' avoz nole pårticion di swap\n"
-"\n"
-"Voloz-ve vormint continuwer?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Vos dvoz aveur ene pårticion FAT montêye so /boot/efi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "Eployî l' plaece libe"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nén del plaece libe assez po fé des noveles pårticions"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "Eployî les pårticions k' i gn a"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "I gn a nén des pårticions po-z eployî"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "Eployî li pårticion Windows pol loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kéne pårticion voloz-ve eployî po-z î mete Linux4win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Tchwezixhoz les grandeus"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "Grandeu del pårticion raecene e Mo: "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "Grandeu del pårticion di swap e Mo: "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "Eployî l' plaece libe sol pårticion Windows"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "Kéne pårticion voloz-ve candjî si grandeu?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "Dji carcule les limites do sistinme di fitchîs di Windows"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Li candjmint di grandeu di vosse pårticion FAT n' a nén stî, \n"
-"a cåze del aroke shûvante: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Vosse pårticion Windows est trop fragméntêye, i fåreut eployî «defrag»"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ASTEME!\n"
-"\n"
-"Asteure, DrakX va candjî li grandeu di vosse pårticion Windows.\n"
-"Loukîz a vos: çoula est dandjureu. Si vos n' l' avoz nén co fwait,\n"
-"enondez (so Windows) scandisk (et mutwè defrag) so cisse pårticion\n"
-"et s' fijhoz ene copeye di såvrité di vos dnêyes dvant di rinonder \n"
-"l' astalaedje.\n"
-"Cwand vos seroz seur di vos, clitchîz so «I va»."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Kéne grandeu voloz-ve wårder po Windows sol "
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "pårticion %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Li candjmint di grandeu pol pårticion FAT a fwait berwete: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"I gn a pont di pårticions FAT po candjî leu grandeu, ou po-z eployî pol "
-"loopback (oudobén i n' resse nén del plaece assez)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Disfacer li plake etîre"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "Bodjî Windows(tm) foû"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Vos avoz pus d' ene deure plake, sol kéne voloz-ve astaler Linux?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"TOTES les pårticions et totes les dnêyes å dvins vont esse pierdowes sol "
-"deure plake %s"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "Pårtixhaedje da vosse del deure plake"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "Eployî fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Asteure vos poloz pårti vosse deure plake %s\n"
-"Cwand vos åroz fini, ni rouvyîz nén di schaper avou «w»"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "I gn a pont del plaece libe assez sol pårticion Windows"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "Dji n' a savu trover del plaece po l' astalåcion"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Li Macrea di Pårtixhaedje di DrakX a trové les solucions shûvantes:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Li pårtixhaedje n' a nén stî: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "Metant li rantoele en alaedje"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Dj' aresteye li rantoele"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Yåk n' a nén stî, et dji n' sai cmint m' saetchî l' cou foû des\n"
-"strons. Si vos continuwez, vos duvroz tirer vosse plan tot seu."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Vos avoz deus côps li pont d' montaedje %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Sacwants consecants pacaedjes n' ont nén stî astalés comufåt.\n"
-"Mutwè vosse lijheu di plakes lazer, oudobén vosse plake lazer, ont\n"
-"des rûjhes.\n"
-"Verifyîz vosse plake lazer sor ene copiutrece ddja astalêye, avou\n"
-"l' comande «rpm -qpl Mandrake/RPMS/*.rpm»\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Wilicome a %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "Nou lijheu di plaketes disponibe"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Intrant e l' étape '%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Tchwezixhoz li grandeu di çu k' voloz astaler"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Grandeu å totå: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "Modêye: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Grandeu: %d Ko\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Tchwezixhoz les pacaedjes k' vos voloz astaler"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "Informåcion"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "Astalaedje"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "Astalant"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "Tårdjîz on pô, s' i vs plait"
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Tins ki dmeure "
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "Tins totå "
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "Dj' apresteye l' astalaedje"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "Astalant li pacaedje %s"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "Dji continowe tot l' minme?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "Yåk n' a nén stî come dj' arindjîve les pacaedjes:"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "Eployî l' apontiaedje di X11 ki egzisteye ddja?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Vosse sistinme a po di rsources. Vos pôrîz aveur des rûjhes po\n"
-"l' astalåcion di Mandrake Linux. Si çoula arive, vos ploz sayî ene\n"
-"astalåcion e môde tecse. Po çoula, tchoûkîz sol tape «F1» a l' enondaedje\n"
-"et pôy tapez «text»."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "Classe d' astalåcion"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Tchwezixhoz ene des classes d' astalåcion shûvantes:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"Po tos les pacaedjes ki vos avoz tchwezi, i vos fårè a pô près %d Mo.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Si vos voloz astaler moens ki çoula, \n"
-"tchwezixhoz li porcintaedje di pacaedjes ki vos voloz astaler.\n"
-"\n"
-"On pus bas porcintaedje vout dire k' i gn a ki les pus consecants\n"
-"pacaedjes ki seront astalés.  100 å 100 vout dire ki tos les pacaedjes\n"
-"tchwezis seront astalés."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"So vosse deure plake, i gn a plaece po %d%% des pacaedjes tchwezis.\n"
-"\n"
-"Si vos voloz astaler moens ki çoula, tchwezixhoz on porcintaedje.\n"
-"On bas porcintaedje vout dire k' i gn a ki les pus consecants pacaedjes\n"
-"ki seront astalés.  On porcintaedje di %d%% astalrè ostant di pacaedjes\n"
-"ki possibe."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Vos åroz l' ocåzion di tchwezi pus spepieuzmint djusse après."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Åcintaedje des pacaedjes a astaler"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "Tchwezi les groupes di pacaedjes"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Tchwezi tchaeke pacaedje separemint"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Grandeu å totå: %d / %d Mo"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "Måva pacaedje"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "No: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Impôrtance: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Vos n' poloz tchwezi ci pacaedje chal ca gn a nén del plaece assez ki po "
-"l' astaler"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "Les pacaedjes ki shûvèt vont esse astalés"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "Les pacaedjes ki shûvèt vont esse disastalés"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Vos n' poloz nén tchwezi/distchwezi ci pacaedje chal"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ci pacaedje est obligatwere, vos n' poloz nén li distchwezi"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Vos n' poloz nén distchwezi ci pacaedje chal. Il est ddja astalé"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ci pacaedje ci duvreut esse metou a djoû\n"
-"Estoz seur ki vos l' voloz distchwezi?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Vos n' poloz nén distchwezi ci pacaedje chal. I l' fåt mete a djoû"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Mostrer les pacaedjes tchwezis otomaticmint"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "Tcherdjî di/schaper e ene plakete"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "Metaedje a djoû del tchûze des pacaedjes"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "Astalåcion minimåle"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "Dj' asteme"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "Tårdjîz on pô s' i vs plait, dj' apresteye l' astalaedje"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d pacaedjes"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "Accepter"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "Nén accepter"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Candjîz vosse CDROM!\n"
-"\n"
-"Metoz li CDROM lomé «%s» dvins l' lijheu, s' i vs plait;\n"
-"et clitchîz so «I va» on côp ki c' est fwait.\n"
-"Si vos n' l' avez nén, clitchîz so «Rinoncî» po rinoncî a astaler a pårti\n"
-"di ci CDROM chal."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "Yåk n' a nén stî come dj' astaleve les pacaedjes:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "Dj' aroke so ene sacwè"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Acoird sol licince"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Taprece"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Tchwezixhoz li sôrte di vosse taprece."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "Vochal li djîvêye di totes les tapreces k' i gn a"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "Kéne classe d' astalåcion voloz-ve?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "Astaler/Mete a djoû"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "C' est ene astalåcion ou on metaedje a djoû?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "Consyî"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "Sipepieus"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Metaedje a djoû"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "Tchwezixhoz li sôrte di vosse sori."
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Pôrt del sori"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Tchwezixhoz li pôrt séreye ki vosse sori est raloyeye dizo."
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Emulåcion des botons"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "Emulåcion do 2inme boton"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "Emulåcion do 3inme boton"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "Apontiant les cåtes PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "Apontiant les éndjins IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "nole pårticion di disponibe"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "Dji louke èzès pårticions po trover les ponts di montaedje"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Tchwezixhoz les ponts di montaedje"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Dji n' parvén nén a lere li tåve di pårtixhaedje: ele est trop\n"
-"crombe por mi :( Dji m' va sayî di disfacer les mwaijhès pårticions\n"
-"(mins TOTES LES DNÊYES vont esse pierdowes!).\n"
-"L' ôte solucion c' est di nén leyî DrakX candjî li tåve di pårtixhaedje.\n"
-"(l' aroke esta «%s»)\n"
-"\n"
-"Estoz ve d' acoird di piede totes les pårticions?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake n' a nén parvinou a lere li tåve di pårtixhaedje.\n"
-"Si vos continuwez, tirez vosse plan tot seu!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"I gn a pont del plaece po on secteu d' enondaedje di 1 Mo! L' astalåcion "
-"continouwrè, mins i vos fårè fé li pårticion d' enondaedje avou DiskDrake po "
-"poleur enonder vosse sistinme."
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "Nole pårticion raecene di trovêye po-z î fé on metaedje a djoû"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "Pårticion Raecene"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "Kéne est li pårticion raecene (/) so vosse sistinme?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Vos dvoz rinonder voste éndjole po vosse tåve di pårtixhaedje candjî"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "Tchwezixhoz li pårticion a abwesner"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "Verifyî s' i gn a des blocs di måvas?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "Abwesnant les pårticions"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Dji fwai et abwesner li fitchî %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Li swap n' est nén grande assez po l' astalaedje: vos e dvoz radjouter."
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Dji cwîr après les pacaedjes k' i gn a"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Dji cwîr après les pacaedjes a mete a djoû"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"I gn a pus del plaece assez so vosse sistinme po-z astaler ou mete a djoû (%"
-"d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Complet (%d Mo)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimom (%d Mo)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Consyî (%d Mo)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "A vosse môde"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Tchwezixhoz si vos vloz tcherdjî ou schaper li tchûze des pacaedjes\n"
-"so ene plakete.\n"
-"Li cogne est l' minme ki po les plaketes fwaites pol oto-astalaedje."
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "Tcherdjî a pårti d' ene plakete"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Tcherdjant a pårti d' ene plakete"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Tchwezi les pacaedjes"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "Metoz ene plakete avou li tchûze des pacaedjes"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Schaper e ene plakete"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "Li grandeu tchwezeye est pus grande kel plaece ki dmeure"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Si vos avoz totes les plakes lazer del djîvêye å dzo, clitchîz so «I va».\n"
-"Si vos n' en avoz nole, clitchîz so «Rinoncî».\n"
-"Si seulmint sacwantès plakes ki vos n' avoz nén, adon vos poloz\n"
-"les distchwezi et clitchî so «I va»."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CDROM lomé «%s»"
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Astalant li pacaedje %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "Apontiaedje di post-astalåcion"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Metoz li plakete d' enondaedje dvins li lijheu %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Metoz li plakete avou les modules metous a djoû dvins li lijheu %s"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Asteure, vos poloz aberweter des programes d' ecriptaedje.\n"
-"\n"
-"ASTEME:\n"
-"\n"
-"Ces programes la estant çu k' i sont, et les lwès di sacwants payis\n"
-"estant çu k' ele sont, les cis k' acatèt ou-z eployî ces programes la\n"
-"dvèt waitî et-z esse seur ki li lwè lz î permet d' aberweter, d' avu, di\n"
-"wårder et d' eployî cisse sôrte di programes la.\n"
-"\n"
-"Di pus, l' atchteu eyet/ou l' ûzeu dvèt bén loukî di n' nén aler\n"
-"disconte des lwès di leu payis.  Si l' atchteu ou l' ûzeu finå ni shût\n"
-"nén l' droet do djeu, i pout esse felmint pûni.\n"
-"\n"
-"MandrakeSoft, ses fabricants eyet ses ahesseus ni seront måy tinous po\n"
-"responsåbes di tote rûjhe especiåle, dîreke ou indîreke (metans:\n"
-"piede di rintrêyes, djocaedje des activités, piede di dnêyes\n"
-"comerciåles ou tot l' minme li kéne ôte piede di cwårs, et co les ôtès\n"
-"responsåbilités ou reboûrsmints k' i fåreut payî so decizion del\n"
-"djustice), ki pôreut advini cåze k' ene sakî a, si sieve ou - tot\n"
-"simplumint - aberweteye ces programes la, ki des atchteus ou des ûzeus\n"
-"finås pôrént eployî après avu siné cist acoird ci.\n"
-"\n"
-"Po tot l' minme li ké racsegnmint å dfait di cist acoird ci, i vos fårè \n"
-"atôchî\n"
-"MandrakeSoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Tchwezixhoz on miroe po nd aberweter des pacaedjes foû"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Dj' atôche li miroe po-z avu l' djîvêye des pacaedjes"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "Tchwezixhoz les pacaedjes ki vos voloz astaler"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "Dins kéne coisse d' eureye vikez?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "L' ôrlodje del éndjolreye metowe e tins universel (GMT)"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Sincronijhaedje otomatike del eure (avou NTP)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "Sierveu NTP"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Sierveu CUPS å lon"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "Nole sicrirece"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Rascoûrti éndjolreye"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Sori"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "Coisse d' eureye"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "Sicrirece"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "Cåte RDIS"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Cåte son"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "Cåte tévé"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "Fitchîs locås"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Mot di passe root"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "Nouk mot di passe"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Ci mot di passe est trop simpe (i doet esse d' å moens %d letes)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "Verifiaedje"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "Verifiaedje LDAP"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "Sierveu LDAP"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "Verifiaedje NIS"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "Dominne NIS"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "Sierveu NIS"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Ene plakete d' enondaedje (boot disk) da vosse vos permetrè d' enonder\n"
-"vosse sistinme GNU/Linux sins l' enondeu (boot loader) normå. Ça pout esse\n"
-"ahessåve si vos n' voloz nén astaler SILO so vosse sistinme, ou si in ôte\n"
-"sistinme d' operance waesteye SILO ou co si SILO ni va nén so voste "
-"éndjole.\n"
-"Vosse plakete d' enondaedje pout siervî eto come imådje di såvrité (rescue\n"
-"image), çu ki vos schaprè li djoû ki vosse sistinme toumrè en rac po do "
-"bon.\n"
-"\n"
-"Si vos vloz fé ene plakete d' enondaedje po vosse sistinme, metoz ene\n"
-"plakete dins l' prumî lijheu di plaketes et clitchoz so «I va»."
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "Prumî lijheu di plaketes"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "Deuzinme lijheu di plaketes"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "Passer hute"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"Ene plakete d' enondaedje (boot disk) da vosse vos permetrè d' enonder\n"
-"vosse sistinme GNU/Linux sins l' enondeu (boot loader) normå. Ça pout esse\n"
-"ahessåve si vos n' voloz nén astaler LILO (ou grub) so vosse sistinme,\n"
-"ou si in ôte sistinme d' operance waesteye LILO ou co si LILO ni va nén\n"
-"so voste éndjole.\n"
-"Vosse plakete d' enondaedje pout siervî eto come imådje di såvrité (rescue\n"
-"image), çu ki vos schaprè li djoû ki vosse sistinme toumrè en rac po do "
-"bon.\n"
-"Voloz-ve fé ene plakete d' enondaedje po vosse sistinme?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "Dji rgrete, i gn a nou lijheu di plaketes"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Tchwezixhoz li lijheu di plaketes ki vos voloz eployî po fé li plakete "
-"d' enondaedje"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Metoz ene plakete divins li lijheu %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "Dji fwai ene plakete d' enondaedje"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "Dj' apresteye l' enondrece"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"I sonle ki voste éndjole est pår trop vîye\n"
-" oudobén k' ele nén cnoxhowe; adon l' enondrece\n"
-" yaboot ni rotrè nén por vos.\n"
-"L' astalaedje va continouwer, mins vos dvroz\n"
-" eployî BootX po-z enonder voste éndjole"
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "Voloz-ve eployî aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Yåk n' a nén stî tot astalant aboot, \n"
-"voloz-ve ki dji saye di foirci l' astalåcion, minme si çoula pout\n"
-"distrure li prumîre pårticion ?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-msgid "Installing bootloader"
-msgstr "Astalant l' enondrece"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Yåk n' a nén stî e l' astalaedje di l' enondrece. Vochal l' aroke:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Vos alez dveur candjî vosse éndjin d' enondaedje (boot-device) dins\n"
-"vosse Open Firmware, po vos poleur mete en alaedje l' enondeu.\n"
-"Tchoûkîz e minme tins so les tapes Comande-Option-O-F å moumint\n"
-"di l' enondaedje, et pôy tapez:\n"
-"    setenv boot-device %s,\\\\:tbxi\n"
-"et pôy tapez: shut-down\n"
-"A l' enondaedje shûvant del copiutrece vos dvrîz voere li prompt di "
-"l' enondeu."
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "Basse"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "Moyene"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "Hôte"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Tchwezixhoz on livea di såvrité"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Metoz ene blanke plakete divins li lijheu %s"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "Dji fé li plakete d' enondaedje otomatike"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Sacwantès étapes n' ont nén stî fwaites,\n"
-"\n"
-"Volez-ve vormint cwiter asteure?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Felicitåcions, l' astalåcion a stî fwaite.\n"
-"Bodjîz li sopoirt d' enondaedje et tapez so Return po rinonder l' éndjole.\n"
-"\n"
-"Po des informåcions so les coridjaedjes k' i gn a po cisse modêye di "
-"Mandrake Linux,\n"
-"loukîz al pådje des Errata sol waibe http://www.mandrakelinux.com/.\n"
-"\n"
-"vos trovroz del informåcion sol apontiaedje do sistinme el tchaptrea\n"
-"sol post-astalåcion do Guide di l' Ûzeu Mandrake Linux Oficîr."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "Fé li plakete d' astalaedje otomatike"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"L' astalaedje pout esse totafwait otomatike si vos vloz,\n"
-"dins ci cas i va abwesner totafwait li deure plake!!\n"
-"(dj' ô bén c' est po-z astaler sor ene noûve éndjole).\n"
-"\n"
-"Mutwè ki vos vloz rifé l' astalåcion.\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "Otomatike"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "Rifé"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Schaper li tchûze des pacaedjes"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Astalåcion di Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> candjî elemints | <espace> tchwezi | <F12> waitroûlêye shûv."
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "i gn a nou kdesu"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "Tchwezixhoz on fitchî"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "Sipepieus"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "Tårdjîz on pô, s' i vs plait"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Ragrandi l' coxhlaedje"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "Raptixhî l' coxhlaedje"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Passer di nou relîjhaedje a on relîjhaedje pa hopês"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "Ambigwité (%s). Seuyoz pus spepieus\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Måva tchûze, sayîz co ene feye\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (%s prémetou) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Vosse tchûze? (prémetowe %s)"
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "Vosse tchûze? (prémetowe %s tapez 'none' po nole) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "Tcheke (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "Almande"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Taprece dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Espagnole"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "Finwèsse"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "Francèsse"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "Norvedjyinne"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "Polonèsse"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "Russe"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "Suwedwèsse"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Taprece do Rweyåme Uni"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "Taprece des Etats Unis"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "Albanyinne"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "Armenyinne (vîle modêye)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "Armenyinne (novele modêye)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "Armenyinne (fonetike)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjanèsse (latene)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "Belje"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "Bulgåre"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "Braezilyinne (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Bielorusse"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "Swisse (cogne tîxhone)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "Swisse (cogne romande)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "Tcheke (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "Almande (sins moitès tapes"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "Danwèsse"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Taprece dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Taprece Dvorak norvedjyinne"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "Estonyinne"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Djeordjyinne (cogne russe)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Djeordjyinne (cogne latene)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Greke"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "Hongrwèsse"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "Crowåte"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "Israelyinne"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "Israelyinne (fonetike)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "Iranyinne"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "Izlandèsse"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Itålyinne"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "Djaponèsse di 106 tapes"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Taprece Koreyinne"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "Taprece del Amerike nonnrece"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituanyinne AZERTY (vîle modêye)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituanyinne AZERTY (novele modêye)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituanyinne QWERTY (roye des limerôs)"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituanyinne QWERTY (fonetike)"
-
-#: ../../keyboard.pm_.c:208
-msgid "Latvian"
-msgstr "Letone"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Macedonyinne"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "Neyerlandèsse"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "Polonèsse (cogne QWERTY)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "Polonèsse (cogne QWERTZ)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "Portuguèsse"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "Canadyinne (Québec)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "Roumin (QWERTZ)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "Roumin (QWERTY)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "Russe (YAVERTY)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "Slovenyinne"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovake (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "Slovake (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "Serbe (cirilike)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Tailandèsse"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr "Tadjike"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turke (cogne wårdiveuse «F»)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turke (cogne modiene «Q»)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "Ucrainyinne"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "Taprece des Etats Unis (moitès tapes)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamyinne QWERTY (roye des limerôs)"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslave (latene)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Betchfessîs montaedjes %s\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "Bodjî les volumes lodjikes d' apreume\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sori SUN"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Tipike"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Soris tipike PS2 a rôlete"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "1 boton"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "Djenerike"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "Rôlete"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "séreye"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "Soris tipike a 2 botons"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "Soris tipike a 3 botons"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (séreye, vî sôrt C7)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "sori bus"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 botons"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 botons"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "nouk"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "Nole sori"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Sayîz on pô vosse sori"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Po mete en alaedje li sori,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "BODJÎZ L' RÔLETE!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Fini"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "Shûvant ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- Di dvant"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "Totafait va-t i comufåt?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Si raloyî al rantoele daegnrece"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Li voye li pus simpe di s' adjonde avou l' adsl, c' est pppoe.\n"
-"Mins nerén, gn a des ôtes raloyaedjes ki s' siervèt fok di pptp ou dhcp.\n"
-"Si vos n' e savoz rén, tchwezixhoz «eployî pppoe»."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speedtouch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "eployî dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "eployî pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "eployî pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Ké client dhcp voloz-ve eployî?\n"
-"Li prémetou est «dhcpcd»"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nole cåte rantoele a stî detectêye so vosse sistinme.\n"
-"Dji n' pou nén apontyî cisse sôrte di raloyaedje."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Tchwezixhoz l' eterface rantoele"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Tchwezixhoz kéne cåte rantoele vos vloz eployî po vos raloyî al rantoele "
-"daegnrece"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nole cåte rantoele di trovêye"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "Apontiant li rantoele"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Intrez chal li no IP di voste éndjole (host name) si vos l' cnoxhoz.\n"
-"Sacwants sierveus DHCP ont mezåjhe do no po-z ovrer.\n"
-"Li no doet esse etîr, metans: «mybox.mylab.myco.com».\n"
-"Vos poloz dner eto l' adresse IP del pasrele s' i gn en a ene."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "No do lodjeu"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "Macrea d' apontiaedje del rantoele"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Cåte RDIS difoûtrinne"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Cåte RDIS divintrinne"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Kéne sôrte di raloyaedje RDIS avoz-ve?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Kén apontiaedje RDIS volez-ve?\n"
-"\n"
-"* Li vî apontiaedje eploye isdn4net. Il a des pouxhantès usteyes,\n"
-"  mins i pout esse on po deur a-z apontyî po on apurdisse,\n"
-"  et n' est nén foirt sitandård.\n"
-"\n"
-"* L' apontiaedje lédjîr est pus åjhey a coprinde, pus standård,\n"
-"  mins avou moens d' usteyes.\n"
-"\n"
-"Nos vs ricomandans l' apontiaedje lédjîr.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Novea apontiaedje (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Vî apontiaedje (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "Apontiaedje pol RDIS"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Tchwezixhoz vosse ahesseu.\n"
-" S' i n' si trove nén el djîvêye, tchwezixhoz «Unlisted»"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "Protocole po l' Europe"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "Protocole po l' Europe (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "Protocole po les ôtes payis"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protocole po les ôtes payis \n"
-" nou canå D (leased lines)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Ké protocole voloz-ve eployî?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "Kéne sôrte di cåte avoz-ve?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "Dji n' sai nén"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Si vos avoz ene cåte ISA, les valixhances sol waitroûlêye ki shût dvreut\n"
-"esse les bones.\n"
-"\n"
-"Si vos avoz ene cåte PCMCIA, vos dvoz cnoxhe l' IRQ et I/R di vosse cåte.\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "Rinoncî"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Continuwer"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "Kéne est li cåte RDIS da vosse ?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Dj' a trové ene cåte RDIS PCI, mins dji n' sai nén ké mineu eployî.\n"
-"Tchwezixhoz li bone cåte PCI dins l' djîvêye ki shût."
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nole cåte RDIS PCI di trovêye. Tchwezixhoz ene dins l' djîvêye ki shût."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Tchwezixhoz li pôrt séreye ki vosse modem est raloyî dzo"
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "Tchûzes di houcaedje pa modem"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "No di raloyaedje"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "Limerô di telefone"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "Pa scripe"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Pa terminå"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "No di dominne"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Prumî sierveu DNS (opcionel)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "Deuzinme sierveu DNS (opcionel)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Vos ploz vos disraloyî oudobén rifé l' apontiaedje do raloyaedje."
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Vos ploz rifé l' apontiaedje do raloyaedje."
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "Vos estoz raloyî al rantoele daegnrece pol moumint."
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Vos ploz vos raloyî al rantoele daegnrece oudobén rifé l' apontiaedje do "
-"raloyaedje."
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "Vos n' estoz nén raloyî al rantoele daegnrece pol moumint."
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Si raloyî al rantoele daegnrece"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "Si disraloyî del rantoele daegnrece"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "Apontyî li raloyaedje del rantoele (locåle ou daegnrece)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Apontiaedje & raloyaedje al rantoele daegnrece"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Asteure nos alans fé l' apontiaedje do raloyaedje %s."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Asteure nos alans fé l' apontiaedje do raloyaedje %s.\n"
-"\n"
-"\n"
-"Clitchoz so «I va» po continouwer."
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "Apontiaedje del Rantoele"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Come vos fjhoz l' astalaedje a pårti del rantoele, li rantoele est ddja "
-"apontieye.\n"
-"Clitchoz so «I va» po wårder l' apontiaedje da vosse, ou so  «Rinoncî» po "
-"rapontyî li raloyaedje al rantoele.\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Wilicome å macrea d' apontiaedje del rantoele\n"
-"\n"
-"Dji va cmincî d' apontyî vosse raloyaedje al rantoele (daegnrece).\n"
-"Si vos n' vloz nén li deteccion otomatike, disclitchoz-lu.\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Tchwezixhoz li profil a-z apontyî"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "Eployî li deteccion otomatike"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "Dji deteke les éndjins..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "Raloyaedje viè modem normå"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "detecté sol pôrt %s"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "Raloyaedje viè RDIS"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "%s detecté"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "Raloyaedje ADSL"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "detecté sol eterface %s"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Raloyaedje viè cåbe TV"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "Raloyaedje viè cåbe TV detecté"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "Raloyaedje al rantoele locåle"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "cåte(s) rantoele detectêye(s)"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Tchwezixhoz li raloyaedje ki vos voloz apontyî"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Vos avoz apontyî diferinnes manîres di s' raloyî al rantoele daegnrece.\n"
-"Tchwezixhoz li cene ki vos vloz eployî.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Raloyaedje al rantoele daegnrece"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "Voloz-ve vos raloyî a tchaeke côp ki l' éndjole est enondêye?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "Apontiaedje del rantoele"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Yåk n' a nén stî tot rinondant li rantoele: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr ""
-"Proficiat, l' apontiaedje del rantoele (locåle et daegnrece) est fini.\n"
-"\n"
-"L' apontiaedje va asteure esse metou en alaedje pol sistinme da vosse.\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"On côp ki ci sreut fwait, nos vos rcomindans di renonder l' evironmint\n"
-"X11 da vosse po nén risker des rûjhes avou l' candjmint d' no di l' éndjole."
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ASTEME: Cist éndjin a ddja stî apontyî po esse raloyî al rantoele "
-"daegnrece.\n"
-"Clitchoz so «I va» po wårder cist apontiaedje la.\n"
-"Oudobén vos ploz candjî les tchamps chal pa dzeu po spotchî l' apontiaedje "
-"avou on novea."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Chal, intrez l' apontiaedje IP di voste éndjole.\n"
-"Totafait doet esse sicrit come ene adresse IP, avou des\n"
-"ponts inte les limerôs (metans: 1.2.3.4)."
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Apontiant l' éndjin di rantoele %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr " (mineu %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "Adresse IP"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "Maske rantoele"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "Adresses IP otomatikes"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "L' adresse IP doet esse del cogne 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Intrez chal li no IP di voste éndjole (host name).\n"
-"Li no doet esse etîr, metans: «mybox.mylab.myco.com».\n"
-"Vos poloz dner eto l' adresse IP del pasrele s' i gn en a ene."
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "Sierveu DNS"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Pasrele"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Éndjin di pasrele"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "Apontiaedje des proxies"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-"Aler vey l' idéntifiant del cåte rantoele (ça pout siervî po les poirtåves)"
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "Li proxy doet esse http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "Li proxy doet esse ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Apontiaedje pol rantoele daegnrece"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Voloz-ve sayî di vos raloyî al rantoele daegnrece asteure?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "Dji saye vosse raloyaedje..."
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "Li sistinme est raloyî al rantoele daegnrece."
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "Po des råjhons di såvrité, i va esse disraloyî tot d' shûte."
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Li sistinme ni sonle nén esse raloyî al rantoele daegnrece.\n"
-"Sayîz di rapontyî li raloyaedje."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Apontiaedje do raloyaedje"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "Rimplixhoz ou verifyîz les tchamps chal pa dzo"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "IRQ del cåte"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Canå DMA del cåte"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "I/R del cåte"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "I/R del cåte (0)"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "I/R del cåte (1)"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Li limerô di telefone da vosse"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "No do ahesseu (eg: walonet.be)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "Limerô di telefone do ahesseu"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "1î DNS do ahesseu (opcionel)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "2inme DNS do ahesseu (opcionel)"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "Tchwezixhoz vosse payis"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "Môde di houcaedje"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Roedeu do raloyaedje"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "Tårdjaedje (e seg) pol raloyaedje"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "Login do conte (no d' ûzeu)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "Mot di passe do conte"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Sitindowe pårticion nén sopoirtêye so cisse platfôme chal"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Vos avoz on trô dvins vosse tåve di pårtixhaedje, mins dji n' pout nén "
-"l' eployî.\n"
-"Li seule solucion c' est di bodjî vos maisses pårticions po-z aveur li trô a "
-"costé des pårticions stindowes"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Yåk n' a nén stî come dji sayîve di rifé a pårti do fitchî %s: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "Måva fitchî di copeye di såvrité"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Yåk n' a nén stî come dji sayîve di scrire el fitchî %s"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Ene sacwè di mwais arive a vosse deure plake. \n"
-"Yåk n' a nén stî tot sayant di verifyî l' etegrité des dnêyes. \n"
-"Çoula vout dire ki tot çu ki vos alez scrire el plake va fini come \n"
-"des crombès sacwès a l' astcheyance."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "k' i fåt d' tote foice avu"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "ki vént bén a pont"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "mo plaijhî a-z avu"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "plaijhî a-z avu"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ki vénreut co bén a pont"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Li novea sistinme di comon eprimaedje po Unix"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - Ene amîdreye modêye do démon d' eprimaedje LPR"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Li vî démon d' eprimaedje di GNU/Linux"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Eprimer sins caweye"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "Sicrirece locåle"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Sicrirece å lon"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "Sicrirece sor on sierveu CUPS å lon"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "Sicrirece sor on sierveu lpd å lon"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "Sicrirece rantoele (soket)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Sicrirece sor on sierveu SMB/Windows"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "Sicrirece sor on sierveu NetWare"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "Dinez on URI d' éndjin di scrirece"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "Evoyî l' bouye a ene comande å traviè d' ene bûze"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "Modele nén cnoxhou"
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr "Eprimaedje direk (sins mineu)"
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(so %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "(so ciste éndjole chal)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Tchwezixhoz li raloyaedje del sicrirece"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kimint li scrirece est ele raloyeye?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"Po les scrireces d' on sierveu CUPS å lon i gn a nou mezåjhe delz\n"
-"apontyî chal: ele sront otomaticmint trovêyes.\n"
-"Tchwezixhoz «Sierveu CUPS å lon» dins ci cas la, s' i vs plait."
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "Nouk"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-msgid "Choose a default printer!"
-msgstr "Tchwezixhoz li prémetowe sicrirece!"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normålmint, CUPS est apontyî otomaticmint sorlon l' apotniaedje di\n"
-"rantoele da vosse, çu ki fwait ki vos ploz eployî les sierveus CUPS\n"
-"k' i gn a so vosse rantoele locåle. Si çoula n' va nén comufåt,\n"
-"disclitchoz «Apontiaedje otomatike di CUPS» eyet aspougnîz vosse\n"
-"fitchî /etc/cups/cupsd.conf al mwin. Ni rouvioz nén di renonder\n"
-"CUPS par après (avou l' comande: service cups restart)."
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Clôre"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "Mete en oûve/lere co ene feye l' apontiaedje des scrireces"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "L' adresse IP doet esse del cogne 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "Li pôrt doet esse on limerô etîr!"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "Prémetowe sicrirece"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "IP do sierveu CUPS"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "Pôrt"
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr "Apontiaedje otomatike di CUPS"
-
-#: ../../printerdrake.pm_.c:217
-msgid "Detecting devices ..."
-msgstr "Dji deteke les éndjins..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "Sayî les pôrts"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "Ene scrirece, modele «%s», a stî trovêye so "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "Éndjin del scrirece locåle"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"Å ké éndjin est raloyeye vosse scrirece \n"
-"(notez ki /dev/lp0 est ekivalint di LPT1:)?\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "Éndjin del scrirece"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "Nou no d' fitchî/d' éndjin!"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-msgid "Reading printer database ..."
-msgstr "Lijhant les båzes di dnêyes des scrireces..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Tchûzes scrirece lpd å lon"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"Po-z eployî ene sicrirece lpd å lon, vos dvoz\n"
-"dner li no di lodjeu do sierveu di scrireces eyet li no\n"
-"del sicrirece sol sierveu."
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "No do lodjeu å lon"
-
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "No del sicrirece å lon"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "Nou no pol lodjeu å lon!"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "Nou no pol sicrirece å lon!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Tchûzes scrirece SMB/Windows"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Po rexhe avou ene sicrirece SMB, vos dvoz dner li no SMB\n"
-"do lodjeu (ki pout ni nén esse li minme ki si no di \n"
-"lodjeu TCP/IP) et mutwè si adresse IP, di minme ki li no\n"
-"del pårteye scrirece ki vos vloz eployî, eyet les nos, mots di\n"
-"passe des ûzeus et informåcion des hopês d' ovraedje k' i fåreut."
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "Lodjeu sierveu SMB"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "IP do sierveu SMB"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "No del pårteye"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "Groupe d' ovraedje"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "I fåt dner li no do sierveu oudobén l' adresse IP do sierveu!"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "Nou no di pårtaedje samba!"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "Tchûzes scrirece NetWare"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Po rexhe avou ene sicrirece NetWare, vos dvoz diner li no\n"
-"NetWare do sierveu di scrireces (ki pout ni nén esse li minme ki si no\n"
-"di lodjeu TCP/IP) di minme ki li no del caweye del scrirece ki vos\n"
-"voloz eployî, eyet les nos et mots di passe des ûzeus k' i fåreut."
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "Sierveu di scrireces"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "No del caweye del scrirece"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "Nou no d' sierveu NCP!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "Nou no d' caweye NCP!"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Tchûzes scrirece rantoele"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Po-z eprimî avou ene scrirece soket, vos dvoz dner\n"
-"li no d' lodjeu del sicrirece, et mutwè ossu li limerô do pôrt.\n"
-"So les sierveus HP JetDirect li pôrt est normålmint li 9100,\n"
-"so d' ôtes sierveus çoula pout candjî. Lijhoz li manuel di\n"
-"voste éndjolreye."
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "No do lodjeu del scrirece"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "Nou no pol lodjeu del scrirece!"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "URI di l' éndjin del scrirece"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Vos ploz mete directumint li hårdêye del sicrirece. Li hårdêye doet shûre "
-"les specificåcions di CUPS ou di Foomatic. Notez ki totes les sôrtes di "
-"hårdêyes ni sont nén sopoirtêyes pa totes les caweyes di scrireces."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "Ene hårdêye di valåbe doet esse dinêye!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"Totes les scrireces divèt poirter on no (par egzimpe lp).\n"
-"Les tchamps di discrijhaedje ou di l' eplaeçmint polèt esse\n"
-"leyîs e blanc. C' est des rawetes po les ûzeus."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "No del sicrirece"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "Discrijhaedje"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "Eplaeçmint"
-
-#: ../../printerdrake.pm_.c:701
-msgid "Preparing printer database ..."
-msgstr "Dji prepare les båzes di dnêyes des scrireces..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "Tchûze do modele del sicrirece"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "Ké modele di scrirece avoz-ve?"
-
-#: ../../printerdrake.pm_.c:866
-msgid "OKI winprinter configuration"
-msgstr "Apontiaedje del sicrirece OKI winprinter"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-"Vos estoz po-z apontyî ene sicrirece OKI laser winprinter.\n"
-"Ces scrireces la eployèt on protocole di comunicåcion foirt\n"
-"sipeciål, çu ki fwait k' ele ni polèt roter comufåt ki raloyeyes\n"
-"å prumî pôrt paralele. Cwand li scrirece est raloyeye a on ôte pôrt\n"
-"ou raloyeye a on sierveu d' eprimaedje, i vos l' fåt mete sol prumî\n"
-"pôrt paralele divant d' poleur rexhe li pådje di saye. Ôtrumint ele\n"
-"ni rotrè nén. Li sôrte di raloyaedje ki vos avoz dné ni srè nén\n"
-"prindou e conte pal mineu."
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-msgid "Lexmark inkjet configuration"
-msgstr "Apontiaedje del sicrirece Lexmark inkjet"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-"Les mineus po les scrireces a djet d' intche k' ont stî dné pa Lexmark\n"
-"sopoirtèt seulmint les scrireces locåles, nén les scrireces å lon ou\n"
-"so des sierveus d' eprimaedje. I vos fåt l' mete so on pôrt locå oudobén\n"
-"l' apontyî sol éndjole wice k' ele est raloyeye."
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-"Po vos poleur eprimer avou vosse Lexmark inkjet eyet cist apontiaedje\n"
-"chal, i vs fåt les mineus po les scrireces a djet d' intche di Lexmark\n"
-"Alez sol waibe http://www.lexmark.com et clitchoz sol boton «Drivers».\n"
-"Pôy, tchwezixhoz vosse modele, et «Linux» come sistinme d' operance.\n"
-"Les mineus vnèt come des pacaedjes RPM ou des scripes shell avou ene\n"
-"eterface d' astalaedje eteractive grafike. Vos n' avoz nén mezåjhe\n"
-"del apotyî avou ciste eterface grafike. Clitchoz so «Rinoncî» djusse\n"
-"après accepter l' licince, et pôy fjhoz rexhe les pådjes po mete\n"
-"e roye les tiesse d' eprimaedje avou «lexmarkmaintain» et coridjez\n"
-"s' i fåt l' alignmint des tiesse d' eprimaedje avou ci programe la."
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"Apontiaedjes pol prémetowe sicrirece\n"
-"Acertinoz ve kel grandeu do papî eyet li sôrte d' intche\n"
-"(cwand on l' pout tchwezi) sont-st apontyîs comufåt.\n"
-"Notez k' avou ene grande finté pol rexhowe l' eprimaedje\n"
-"pout esse bén pus londjin."
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Li tchûze %s doet esse on limerô etîr!"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Li tchûze %s doet esse on limerô!"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Li tchûze %s est foû limites!"
-
-#: ../../printerdrake.pm_.c:1136
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Voloz ve mete cisse sicrirece chal («%s»)\n"
-"come li prémetowe sicrirece?"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "Rexhe les pådjes di saye"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"Tchwezixhoz les pådjes di saye ki vos vloz rexhe s' i vs plait.\n"
-"Note: li pådje pol saye del cwålité foto pout bén prinde on long moumint\n"
-"a rexhe del sicrirece, avou des scrireces lazer ki n' ont nén beacôp\n"
-"d' memwere, i s' pout minme kel pådje ni rexhe måy.\n"
-"Dins l' plupårt des cas c' est assez avou l' pådje di saye sitandård."
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "Nén rexhe les pådjes di saye"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "Rexhe"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "Pådje di saye standård"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr "Pådje di saye alternative (grandeu «letter»)"
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr "Pådje di saye alternative (grandeu A4)"
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "Pådje di saye cwålité foto"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "Dji rexhe li/les pådje(s) di saye..."
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Li ou les pådjes di saye ont stî evoyeyes al sicrirece.\n"
-"Ça pout prinde ene pitite hapêye divant ki li scrirece s' enonde.\n"
-"Avançmint:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Li ou les pådjes di saye ont stî evoyeyes al sicrirece.\n"
-"Ça pout prinde ene pitite hapêye divant ki li scrirece s' enonde.\n"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "Est-ce ki çoula rota comufåt?"
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-msgid "Raw printer"
-msgstr "Eprimaedje direk"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Po-z eprimer on fitchî a pårti del roye di comande (d' on purnea terminå) "
-"eployîz li comande «%s <fitchî>» oudobén ene usteye d' eprimaedje grafike: "
-"«xpp <fitchî>» ou «qtcups <fitchî>». Les usteyes grafikes permetèt di "
-"tchwezi li scrirece a rexhe avou et candjî åjheymint les tchûzes.\n"
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Vos ploz ossi eployî ces comandes la pol tchamp «Comande po rexhe» k' i gn a "
-"el purnea di dialogue pol eprimaedje di beacôp di programes, mins chal ni "
-"metoz nén li no di fitchî ca c' est l' programe kel dinrè.\n"
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Li comande «%s» permete ossi di candjî les tchûze po ene bouye d' eprimaedje "
-"dnêye. Tot simplumint radjoutez les tchûzes ki vos vloz el roye di comande, "
-"eg: «%s <fitchî>». "
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-"Po-z aveur ene djivêye des tchûzes k' i gn a pol sicrirece lijhoz li djîvêye "
-"chal pa dzo oudobén clitchoz sol boton «Djîvêye des tchûzes pol "
-"eprimaedje».\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Po-z eprimer on fitchî a pårti del roye di comande (d' on purnea terminå) "
-"eployîz li comande «%s <fitchî>».\n"
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Cisse comand vos l' poloz ossi eployî pol tchamp «Comande po rexhe» k' i gn "
-"a el purnea di dialogue pol eprimaedje di beacôp di programes, mins chal ni "
-"metoz nén li no di fitchî ca c' est l' programe kel dinrè.\n"
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-"Po-z aveur ene djivêye des tchûzes k' i gn a pol sicrirece clitchoz sol "
-"boton «Djîvêye des tchûzes pol eprimaedje».\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Po-z eprimer on fitchî a pårti del roye di comande (d' on purnea terminå) "
-"eployîz li comande «%s <fitchî>» oudobén «%s <fitchî>».\n"
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Vos ploz ossi eployî l' eterface grafike «xpdq» po defini des tchûzes et \n"
-"manaedjî les bouyes d' eprimaedje.\n"
-"Si vos eployîz KDE come sicribanne vos avoz on boton «panike», et ene "
-"imådjete sol sicribanne, avou l' tecse «JOKER l' eprimaedje!», ki va djoker "
-"sol moumint totes les bouyes d' eprimaedje cwand vos l' clitchoz. Çouchal "
-"pout esse ahessåve si li scrirece a des problemes avou l' papî.\n"
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Les comandes «%s» et «%s» permetèt ossi di candjî les tchûzes po ene bouye "
-"d' eprimaedje dnêye. Tot simplumint radjoutez les tchûzes ki vos vloz el "
-"roye di comande, eg: «%s <fitchî>».\n"
-
-#: ../../printerdrake.pm_.c:1292
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Dji rexhe sol sicrireces «%s»"
-
-#: ../../printerdrake.pm_.c:1294
-msgid "Print option list"
-msgstr "Djîvêye des tchûzes pol eprimaedje"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "Lijhant les dnêyes del sicrirece..."
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "Transferer l' apontiaedje del sicrirece"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-"Vos ploz copyî l' apontiaedje del sicrirece ki vos avez fwait pol \n"
-"caweye %s pol caweye %s, li cene en alaedje pol moumint. Totes les \n"
-"dnêyes d' apontiaedje (no del sicrirece, discrijhaedje, eplaeçmint, \n"
-"sôrte di raloyaedje, eyet prémetowes tchûzes) vont esse sipotcheyes \n"
-"pa les cis ki vos copeyroz, mins les bouyes k' atindèt po rexhe ni vont \n"
-"nén esse candjeyes di caweye.\n"
-"Totes les caweyes ni polèt nén esse transferêyes di cisse manîre påzès \n"
-"råjhons ki shûvèt:\n"
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr ""
-"CUPS ni sopoite nén les scrireces so des sierveus Novell nerén\n"
-"les cenes k' evoyèt les dnêyes so tot l' minme kéne comande.\n"
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-"PDQ sopoite seulmint les scrireces locåles, les scrireces LPD å lon\n"
-"eyet les scrireces viè soket/TCP.\n"
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD eyet LPRng ni sopoirtèt nén les scrireces IPP.\n"
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-"Sol copete di tot çoula, les caweyes ki n' ont nén stî\n"
-"fwaites avou ci programe chal nerén avou «foomatic-configure»\n"
-"ni polèt nén esse transferêyes."
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-"\n"
-"Ossu, les scrireces apontieyes avou des fitchîs PPD dnés\n"
-"pal costrujheu oudobén avou les mineus CUPS d' oridjine\n"
-"ni polèt nén esse transferêyes nerén."
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Noerixhoz les scrireces ki vos vloz transferer et clitchoz \n"
-"so «Transfer»."
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "Nén transferer les scrireces"
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "Transfer"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"I gn a ddja ene scrirece lomêye «%s» so %s. \n"
-"Clitchoz so «Transfer» pol sipotchî.\n"
-"Vos ploz ossu dner on novea no, oudobén passer houte\n"
-"l' apontiaedje di cisse sicrirece chal."
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Li no del scrirece doet aveur seulmint des letes, des chifes et li sine "
-"«sorlignî» (_)"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Li scrirece «%s» egzisteye ddja,\n"
-"voloz ve vormint spotchî si apontiaedje?"
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "Novea no del sicrirece"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Transfer di %s ..."
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-"Vos avoz fwait on transfer di vosse vîye prémetowe sicrirece («%s»),\n"
-"El voloz ve mete ossu come prémetowe sicrirece pol novea\n"
-"sistinme d' eprimaedje %s?"
-
-#: ../../printerdrake.pm_.c:1423
-msgid "Refreshing printer data ..."
-msgstr "Rafristant les dnêyes del sicrirece..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr "Apontiaedje d' ene sicrirece å lon"
-
-#: ../../printerdrake.pm_.c:1432
-msgid "Starting network ..."
-msgstr "Dj' enonde li rantoele..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-msgid "Configure the network now"
-msgstr "Apontyî li rantoele asteure"
-
-#: ../../printerdrake.pm_.c:1455
-msgid "Network functionality not configured"
-msgstr "Li sopoirt del rantoele n' a nén stî apontyî"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-"Vos alez apontyî ene sicrirece å lon. Çouchal a mezåjhe d' ene\n"
-"rantoele en alaedje, mins li vosse n' est nén co apontieye.\n"
-"Si vos continuwez sins rantoele vos n' porèz nén sayî li scrirece\n"
-"ki vos apontyîz pol moumint. Cwè volez ve fé?"
-
-#: ../../printerdrake.pm_.c:1463
-msgid "Go on without configuring the network"
-msgstr "Continouwer sins apontyî li rantoele"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-"Li rantoele n' esteut nén en alaedje, et dj' nén polou \n"
-"l' enonder. Verifyîz vost apontiaedje et voste éndjolreye. \n"
-"Et pôy sayîz cor on côp d' apontyî vosse sicrirece å lon."
-
-#: ../../printerdrake.pm_.c:1516
-msgid "Restarting printing system ..."
-msgstr "Renondant li sistinme d' eprimaedje..."
-
-#: ../../printerdrake.pm_.c:1548
-msgid "high"
-msgstr "hôte"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "paranoid"
-msgstr "couyon"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Astalaedje d' on sistinme d' eprimaedje e livea di såvrité «%s»"
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Starting the printing system at boot time"
-msgstr "Enonder li sistinme d' eprimaedje a l' enondaedje del éndjole"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "Cwerant après les astalés programes..."
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "Dji bodje LPRng..."
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "Dji bodje LPD..."
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Tchwezixhoz li caweye di scrirece"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Ké sistinme d' eprimaedje (sôrte di caweyaedje) voloz-ve eployî?"
-
-#: ../../printerdrake.pm_.c:1759
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Apontiant li scrirece «%s»..."
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "Tchûzes pol scrirece"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr "Dji prepare PrinterDrake..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "Voloz-ve apontyî l' eprimaedje?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr "Sistinme d' eprimaedje: "
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-"Les scrireces shûvantes sont-st apontieyes.\n"
-"Clitchoz so ene di zeles pol candjî ou\n"
-"po-z aveur des informåcions dso.\n"
-"Clitchoz so «Radjouter ene sicrirece» po ndè\n"
-"radjouter ene."
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "Môde normå"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (Prémetou)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Sicrirece(s) sor on/des sierveu(s) CUPS å lon"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-msgid "Printer(s) on remote server(s)"
-msgstr "Sicrirece(s) sor on/des sierveu(s) å lon"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Radjouter ene sicrirece"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-msgid "Do you want to configure another printer?"
-msgstr "Voloz ve apontyî ene ôte sicrirece?"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "Candjî l' apontiaedje del sicrirece"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Sicrirece %s: %s %s\n"
-"Cwè voloz-ve candjî avou cisse sicrirece chal?"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "El fé!"
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "Sôrte di raloyaedje del sicrirece"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "No, discrijhaedje, eplaeçmint del sicrirece"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "Vindeu, modele, mineu del sicrirece"
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "Vindeu, modele del sicrirece"
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr "Mete cisse sicrirece come prémetowe sicrirece"
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "Rexhe les pådjes di saye"
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr "Saveur kimint rexhe so cisse sicrirece chal"
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "Bodjî ene sicrirece"
-
-#: ../../printerdrake.pm_.c:2071
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Dji bodje li vîye scrirece «%s»..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Li scrirece «%s» a stî metowe come prémetowe sicrirece."
-
-#: ../../printerdrake.pm_.c:2103
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Voloz-ve vormint bodjî foû li scrirece «%s»?"
-
-#: ../../printerdrake.pm_.c:2105
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Dji bodje li scrirece «%s»..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Apontiaedje des proxies"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Bénvnowe sol usteye d' apontiaedje des proxies.\n"
-"\n"
-"Chal, vos pôroz apontyî vos proxies http eyet ftp\n"
-"avou ou sins no d' ûzeu ou sicret\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Rimplixhoz avou les informåcions pol proxy http s' i vs plait\n"
-"Leyîz e blanc si vos n' volez nén on proxy http"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "Hårdêye"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "pôrt"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Li hårdêye doet cmincî avou «http:»"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Li pôrt doet esse on limerô"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Rimplixhoz avou les informåcions pol proxy ftp s' i vs plait\n"
-"Leyîz e blanc si vos n' volez nén on proxy ftp"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Li hårdêye doet cmincî avou «ftp:»"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Dinez l' no d' ûzeu et li scret, s' i gn a onk.\n"
-"Leyîz e blanc si vos n' volez nén eployî di no d' ûzeu/di scret"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "no d' ûzeu"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "sicret"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "tapez li scret cor on côp"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Les screts ni sont nén les minmes. Sayîz co ene feye!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Dji n' pout radjouter ene pårticion a on RAID _abwesné_ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Dji n' pout scrire li fitchî %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid n' a nén stî"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid n' a nén stî (mutwè vos n' avoz nén les raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "I gn a nén des pårticions assez pol livea RAID %d\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Enonder li sistinme di son ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-"Anacron manaedje des comandes a enonder periodicmint.\n"
-"I ravize a «cron» mins po des sistinmes ki n' sont nén en alaedje\n"
-"24e/24e. Anacron si tchedje di s' mete a djoû et d' enonder les tårdjowès\n"
-"comandes cwand l' éndjole est enondêye."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd sieve a shûre l' etat del batreye et a scrire les racsegnmints avou "
-"syslog.\n"
-"I pout eto siervî a clôre l' éndjole cwand c' est ki les batreyes divnèt "
-"flåwes."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Enonde les cmandes metowes avou li cmande at å moumint defini avou li cmande "
-"at.\n"
-"Sieve eto a enonder des cmandes batch cwand c' est ki l' éndjole n' a nén\n"
-"trop d' ovraedje so les bresses."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron est on programe sitandård po Unix.  Il enonde des programes tchwezis\n"
-"pa l' ûzeu a des moumints metous pa l' ûzeu.  Li cron da Vixie radjoute "
-"sacwants\n"
-"siervice å programe cron tradicionél di Unix, par egzimpe ene meyeuse "
-"såvrité\n"
-"eyet des pus ritchès tchûzes po l' apontiaedje."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"Avou GPM vos avoz li sopoirt del sori po les programes Linux e mode tecse,\n"
-"come li «comandeu di meynute» (Midnight Commander, mc). Et vos avoz eto\n"
-"li sopoirt po côper et d' plaker sol conzôle, et sopoirt po des menus\n"
-"pop-up sol conzôle."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake fwait ene deteccion del éndjolreye, et pout ossu apontyî\n"
-"les noveas/candjîs éndjins."
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache est on sierveu HTTP. Il est eployî po siervî des pådjes waibe\n"
-"et des CGI."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Li démon Internet (inetd) est on «super-sierveu» k' enonde ene drigleye\n"
-"d' ôtes siervices k' ont a vey avou internet cwand c' est k' i gn a "
-"mezåjhe.\n"
-"Metans: telnet, ftp, rsh eyet login.  Si vos n' purdoz nén inetd, nouk di "
-"ces\n"
-"siervices la ni såreut esse enondé."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Enonde ene passete po les pakets rantoele, pol séreye di naweas Linux 2.2,\n"
-"vos end avez mezåjhe po mete so pîs on côpe feu po mete voste éndjole\n"
-"a hipe des atakes des hacneus."
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ci pacaedje chal tchedje li taprece tchwezeye e /etc/sysconfig/keyboard.\n"
-"Çoula pout esse apontyî avou l' usteye kbdconfig.\n"
-"Vos l' dvoz leyî en alaedje pol plupårt des éndjoles."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Fé otomaticmint des noveles tiestîres do nawea dins /boot\n"
-"a pårti di /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Deteccion et apontiaedje otomatikes del éndjolreye a l' enondaedje."
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Pa côps linuxconf va fé totès sôrtes di bouyes å moumint di\n"
-"l' enondaedje po wårder l' apontiaedje do sistinme."
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd est li démon d' eprimaedje k' i gn en a mezåjhe po lpr poleur rexhe "
-"comufåt.\n"
-"C' est on sierveu ki manaedje les bouyes po les scrireces."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Li sierveu Linux virtuwel, eployî po fé on sierveu di hôte performance\n"
-"et di hôte disponibilité (high-availability)."
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) est on sierveu di nos d' dominne (DNS) eployî po-z aveur\n"
-"les adresses IP limerikes a pårti des nos des lodjeus."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monte et dismonte les ponts di montaedje po Network File System (NFS), \n"
-"SMB (Lan Manager/Windows) èt NCP (NetWare)."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Enonde ou aresteye totes les eterfaces di rantoele apontieyes po\n"
-"s' mete en alaedje cwand c' est ki l' éndjole s' enonde."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS est on protocole populaire po pårti des fitchîs so les rantoeles TCP/"
-"IP.\n"
-"Ci siervice chal c' est po-z aveur on sierveu NFS, ki est apontyî\n"
-"viè l' fitchî /etc/exports."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS est on protocole populaire po pårti des fitchîs so les rantoeles TCP/"
-"IP.\n"
-"Ci siervice chal c' est po-z aveur li foncsionalité di blocaedje\n"
-"di fitchîs pa NFS."
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Mete otomaticmint en alaedje li coine des tapes limerikes del taprece\n"
-"a l' enondaedje; ossu bén so X11 k' e conzôle."
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Sopoirt po les scrireces OKI 4w et copatibes."
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Li sopoirt PCMCIA c' est po sopoirter des sacwès come des cåtes rantoele\n"
-"ou des modems, avou les poirtåvès copiutreces. I n' srè nén enondé a moens\n"
-"di esse apontyî, adon c' est nén måva del leyî astalé minme so les éndjoles\n"
-"wice k' on n' s' e siervèt nén."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Li mapeu d' pôrts manaedje les raloyaedjes RPC, ki sont-st eployîs pa\n"
-"des protocoles come NFS ou NIS. Li sierveu portmap doet esse en alaedje\n"
-"so les éndjoles ki dvèt esse des sierveus po des protocoles ki s' e siervèt "
-"do RPC."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix est ene usteye ki fwait voyaedjî les emiles d' ene éndjole \n"
-"a l' ôte."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Schaper et rprinde l' éntropeye do sistinme, po-z aveur ene askepiance\n"
-"di nombes aleatoires di meyeuse cwålité."
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Assinaedje di peur éndjins (raw devices) po les éndjins di sôrte blok (come\n"
-"les pårticions des deures plakes), po des programas come Oracle s' endè "
-"siervî"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Li démon routed c' est po-z aveur li tåvlea di routaedje IP esse metou a "
-"djoû\n"
-"otomaticmint viè l' protocole RIP. Li protocole RIP est bråmint eployî avou\n"
-"les ptitès rantoeles, mins des pus complesses rantoeles ont mezåjhe di pus "
-"complesses protocoles."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Li protocole rstat c' est po les ûzeus k' i gn a sor ene rantoele poleur\n"
-"vey des informåcions sol performance d' ene éndjole del rantoele."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Li protocole rusers c' est po les ûzeus k' i gn a sor ene rantoele poleur\n"
-"idéntifyî kî est raloyî so des ôtès éndjoles."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Li protocole rwho c' est po des lodjeus å lon poleur vey ene djîvêye\n"
-"di tos les ûzeus ki sont raloyîs sol éndjole, si l' démon rwho est\n"
-"astalé eyet en alaedje (çoula ravize a finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Enonder li sistinme di son so voste éndjole"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog est ene usteye ki xhoûte les diferins démons ki lî evoyèt\n"
-"des messaedjes di log po mete dvins les fitchîs di log do sistinme.\n"
-"C' est ene bone idêye di l' aveur todi en alaedje."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "Tcherdjî les mineus po vos éndjins USB."
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Enonder li sierveu d' fontes å moumint di l' enondaedje\n"
-"(çoula est obligatwere si vos vloz eployî XFree)."
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Tchwezixhoz kés siervices dvèt esse enondés a l' enondaedje do sistinme"
-
-#: ../../services.pm_.c:126
-msgid "Printing"
-msgstr "Eprimaedje"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Rantoele"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr "Pårtaedje di fitchîs"
-
-#: ../../services.pm_.c:132
-msgid "System"
-msgstr "Sistinme"
-
-#: ../../services.pm_.c:137
-msgid "Remote Administration"
-msgstr "Administråcion då lon"
-
-#: ../../services.pm_.c:145
-msgid "Database Server"
-msgstr "Sierveu di båze di dnêyes"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Siervices: %d en alaedje po %d eredjistrés"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Siervices"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "en alaedje"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "djoké"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Siervices et démons"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"Mande escuzes, mins dj' a pont d' ôtès\n"
-"informåcions so ci siervice chal."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "A l' enondaedje"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Astalant les pacaedjes..."
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Dji n' parvén nén a lére li tåve di pårtixhaedje: ele est trop\n"
-"crombe por mi :( Dji m' va sayî di disfacer les mwaijhès pårticions."
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "Aroke!"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Dji n' sai trover li fitchî imådje «%s» k' i gn a mezåjhe."
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "Apontieu di l' astalaedje otomatike"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "Apontiaedje des étapes otomatikes"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"S' i vs plait, tchwezixhoz po tchaeke étape s' i l' fåt rifé come vos "
-"l' avoz fwait po voste astalaedje, ou s' i l' fåt fé manuwelmint"
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "Complumints!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Li plakete a stî fwaite comufåt.\n"
-"Vos ploz asteure rifé on astalaedje avou."
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Pårtaedje do raloyaedje al rantoele daegnrece"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Li pårtaedje do raloyaedje al rantoele daegnrece est en alaedje"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"L' apontiaedje do pårtaedje do raloyaedje al rantoele daegnrece a ddja stî "
-"fwait.\n"
-"Il est en alaedje pol moumint.\n"
-"\n"
-"Cwè voloz-ve fé?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "dismete"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "passer houte"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "rapontyî"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Dismetant les sierveus..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Asteure li pårtaedje do raloyaedje al rantoele daegnrece est dismetou."
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Li pårtaedje do raloyaedje al rantoele daegnrece est dismetou."
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"L' apontiaedje do pårtaedje do raloyaedje al rantoele daegnrece a ddja stî "
-"fwait.\n"
-"Il est pol moumint dismetou.\n"
-"\n"
-"Cwè voloz-ve fé?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "mete en alaedje"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Metant les sierveus en alaedje..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr ""
-"Asteure li pårtaedje do raloyaedje al rantoele daegnrece est en alaedje."
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Vos alez apontyî li copiutrece da vosse po pårti li raloyaedje al rantoele "
-"daegnrece.\n"
-"Avou çoula, les ôtès copiutreces di vosse rantoele locåle si polèt raloyî\n"
-"al rantoele daegnrece å dtraviè del cene da vosse.\n"
-"\n"
-"Note: vos åroz mezåjhe d' ene cåte rantoele po vosse rantoele locåle (LAN)."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Eterface %s (ki eploye li module %s)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Eterface %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "Nole cåte rantoele so voste éndjole!"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nole cåte rantoele a stî detectêye so vosse sistinme.\n"
-"Eployîz l' usteye d' apontiaedje del éndjolreye s' i vs plait."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "Eterface rantoele"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"I gn a seulmint ene cåte rantoele d' apontieye so vosse sistinme:\n"
-"\n"
-"%s\n"
-"\n"
-"Dji va-z apontyî vosse rantoele locåle avou cisse cåte la."
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Tchwezixhoz kéne cåte rantoele va esse raloyeye a vosse rantoele locåle"
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"Advertixhmint: li cåte rantoele a ddja stî apontieye. Djel va rapontyî."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"I pout î aveur on conflit d' adresses pol rantoele locåle\n"
-"avou l' apontiaedje do moumint po %s !\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "Dj' a detecté l' apontiaedje d' on côpe feu!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Asteme! Dj' a detecté on côpe feu ddja apontyî. I vos fåreut mutwè on po "
-"d' apontiaedje manuwel après l' astalåcion."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "Apontiant..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Apontiant les scripts, astalant les programes, enondant les sierveus..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Yåk n' a nén stî cwand dj' astaleve li pacaedje %s"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Totafwait a stî apontyî.\n"
-"Vos ploz asteure pårti li raloyaedje al rantoele daegnrece avou d' ôtes "
-"copiutreces di vosse rantoele locåle, tot eployant l' apontiaedje otomatike "
-"des éndjoles (avou DHCP)."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "L' apontiaedje a ddja stî fwait. Mins il est pol moumint dismetou."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "L' apontiaedje a ddja stî fwait. Et il est en alaedje pol moumint."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Li pårtaedje do raloyaedje al rantoele daegnrece n' a måy stî apontyî."
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Apontiaedje do pårtaedje do raloyaedje al rantoele daegnrece"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Wilicome al usteye d' apontiaedje do pårtaedje do raloyaedje al rantoele "
-"daegnrece!\n"
-"\n"
-"%s\n"
-"\n"
-"Clitchoz so «Apontyî» si vos vloz enonder li macrea d' apontiaedje."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Apontiaedje del rantoele (%d adaptoes)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "Disfacer profil..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Profil a disfacer:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "Novea profil..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"No do profil a fé (li novea profil va esse ene copeye di ci do moumint avou "
-"on novea no):"
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "No do lodjeu: "
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Accès al rantoele daegnrece"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "Sôrte:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Pasrele:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Eterface:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "Sitatut:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Raloyî"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "Nén raloyî"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Si raloyî..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Si disraloyî..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "Dj' enonde vosse raloyaedje..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "Dji sere vosse raloyaedje..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Li raloyaedje n' est nén seré.\n"
-"Sayîz del fé manuwelmint enondant\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"come root."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "Li sistinme est asteure disraloyî."
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "Apontyî li raloyaedje al rantoele daegnrece..."
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "Apontiaedje del rantoele locåle"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Mineu"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "Eterface"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "Protocole"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "Sitatut"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "Apontyî li rantoele locåle..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr "Clitchoz chal po-z enonder l' macrea ->"
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Mete en oûve"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "Tårdjîz s' i vs plait, dji mete en alaedje l' apontiaedje"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Vos n' avez nole eterface d' apontieye.\n"
-"I vos fåt enn apontyî ene, clitchoz so «Apontyî»"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "Apontiaedje del rantoele locåle"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptoe %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Protocole d' enondaedje"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "Èn alaedje a l' enondaedje"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "mete en alaedje asteure"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "essocter asteure"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Vos n' avoz nou raloyaedje al rantoele daegnrece.\n"
-"Po ennè fé onk clitchoz so «Apontyî»"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Apontiaedje do raloyaedje al rantoele daegnrece"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Apontiaedje do raloyaedje al rantoele daegnrece"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Sôrte di raloyaedje: "
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "Parametes"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Cåte rantoele"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Ouxh å lådje po les hacneus"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "Pôve"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "Couyon"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ci livea chal doet esse eployî avou sogne. Avou lî vosse sistinme srè pus\n"
-"åjhey a eployî, mins avou moens di såvrité: i n' fåt nén l' eployî po ene\n"
-"éndjole raloyeye a ene rantoele. I gn a pont di mot di passe po-z intrer."
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Avou ci livea chal i gn a des mots di passe, mins c' est tolminme on livea\n"
-"di såvrité trop bas ki po l' eployî avou ene copiutrece raloyeye a ene "
-"rantoele."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Ci livea chal a sacwants ramîdraedjes pol såvrité, principålmint i gn a\n"
-"pus di messaedjes d' advertixhmint et des verificåcions."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"Çouchal c' est l' livea di såvrité standård po ene copiutrece ki va esse\n"
-"eployeye po si raloyî al rantoele daegnrece come client.\n"
-"I gn a des verificåcions del såvrité."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"Avou ci livea chal, vos poloz eployî li sistinme come on sierveu.\n"
-"Li såvrité est hôte assez ki po-z eployî li sistinme come on sierveu\n"
-"ki agzeptrè des raloyaedjes di bråmint des clients."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Les minmes sacwès ki pol livea 4, mins asteure li sistinme est seré "
-"totafait.\n"
-"Li såvrité est å pus grand."
-
-#: ../../standalone/draksec_.c:65
-msgid "Security level"
-msgstr "Livea di såvrité"
-
-#: ../../standalone/draksec_.c:67
-msgid "Use libsafe for servers"
-msgstr "Eployî libsafe po les sierveus"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Ene lîvreye po disfinde l' éndjole siconte les atake di «buffer overflow» "
-"eyet les atakes so les formataedjes des tchinnes."
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "Dji mete li livea di såvrité"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Cénte di contrôle"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Tchwezixhoz l' usteye ki vos voloz eployî"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "Po s' e siervî: keyboarddrake [--expert] [taprece]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Volez-ve kel tape «BackSpace» evoye on «Delete» el conzôle?"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "Candjî di plake lazer"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Metoz li CDROM d' astalåcion dvins l' lijheu, s' i vs plait;\n"
-"et clitchîz so «I va» on côp ki c' est fwait.\n"
-"Si vos n' l' avez nén, clitchîz so «Rinoncî» po passer hute li metaedje a "
-"djoû."
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Dji n' sai enonder li vicant metaedje a djoû !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "nou serial_usb di trové\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Emuler li troezinme boton?"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "Apontiaedje do côpe feu"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "Apontiaedje do côpe feu"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Côpe feu\n"
-"\n"
-"Vos avez ddja apontyî on côpe feu.\n"
-"Clitchoz so «Apontyî» po candjî ou bodjî foû li côpe feu."
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Côpe feu\n"
-"\n"
-"Clitchoz so «Apontyî» po-z apontyî on sistinme côpe feu tipike."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Tchwezi vosse lingaedje"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Li classe d' astalåcion"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Trover les deurès plakes"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Apontyî li sori"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Tchwezi vosse taprece"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Såvrité"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Sistinmes di fitchîs"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Abwesner pårticions"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Pacaedjes a astaler"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Astaler sistinme"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Radjouter in ûzeu"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Apontyî li rantoele"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Apontyî les siervices"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "Fé ene plakete d' enondaedje"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "Astaler l' enondrece"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Apontyî X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Moussî foû"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Apontiaedje d' on ptit côpe feu\n"
-"\n"
-"Çouci apontieye on côpe feu personel (dj' ô bén, po esse eployî sor on\n"
-"posse éndjolrece) po ciste éndjole Mandrake Linux chal.\n"
-"Po ene pouxhante solucion di côpe feu, loukîz purade do costé\n"
-"del distribucion MandrakeSecurity avou on côpe feu di hôte såvrité."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Asteure nos alans vos dmander ké siervices ki vos vloz ki seuyénxhe\n"
-"veyåves a pårti del rantoele daegnrece po les djins poleur s' î raloyî.\n"
-"S' i vs plait tûzez a çu ki vos rispondez, ca li såvrité di vosse\n"
-"copiutrece est importante.\n"
-"\n"
-"Si vos n' eployez nén onk di ces siervices la, metoz-lu pa drî del côpe\n"
-"feu (firewall), come çoula on n' pôreut nén s' î raloyî (nerén li hacner)\n"
-"d' å dfoû. Vos poloz candjî cist apontiaedje a tolminme ké moumint\n"
-"simplumint e rnondant ci programe chal!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Est-ce ki vos avoz on sierveu waibe so ciste éndjole chal ki vos vloz ki\n"
-"tos les djins sol rantoele daegnrece polexhe vey? Si vos avoz on sierveu\n"
-"waibe k' i gn a ki ciste éndjole chal ki doet poleur li vey, vos ploz\n"
-"sins rûjhe dire «Neni» chal.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Est-ce ki vos avoz on sierveu di nos (DNS) so ciste éndjole chal?\n"
-"Si vos n' en avoz nén onk apontyî po dner des informåcions so des adresses\n"
-"et zônes IP ås djins sol rantoele daegnrece, adon rispondez «Neni» chal.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Volez-ve permete di rçure des raloyaedjes avou ssh (Secure Shell) so\n"
-"voste éndjole? Ssh est on replaeçmint di telnet ki vos ploz eployî\n"
-"po fé des login då lon. Si vos avîz ddja eployî telnet, vos dvrîz vormint\n"
-"candjî po ssh. telnet n' a nole såvrité -- des hacneus k' i gn a pôrént\n"
-"vey vosse sicret et l' eployî po fé des sacwès dizo voste identité.\n"
-"Ssh eploye on canå ecripté divant minme d' evoyî les screts, çu ki fwait\n"
-"k' on hacneu ni såreut nén ddja lere çu ki vos tapez."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Volez-ve permete di rçure des raloyaedjes viè telnet so voste éndjole?\n"
-"C' est dandjureus ki c' est a nén croere, come çoula a stî espliké\n"
-"el waitroûlêye di dvant. Nos vs ricomindans foirtumint di dire «Neni» chal\n"
-"et d' eployî purade ssh ki telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Est-ce ki vos avoz on sierveu FTP en alaedje ki vos vloz k' i pôye esse\n"
-"veyou a pårti del rantoele daegnrece po les djins s' î raloyî?\n"
-"Si vos en avez onk, nos vos rcomandans foitemint del eployî rén ki po\n"
-"des transfers anonîmes. Ca tolminme ké sicret evoyî pa FTP pout esse\n"
-"lejhou pa on hacneu, li protocole FTP n' eployant nén d' ecriptaedje\n"
-"pol evoyaedje des screts.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Est-ce ki vos avoz on sierveu d' emilaedje chal? Si vos evoyîz vos emiles\n"
-"avou pine, mutt ou on ôte client d' emilaedje e môde tecse,\n"
-"c' est foirt possibe k' oyi.  Ôtrumint, vos dvrîz apontyî li mete\n"
-"pa drî li côpe feu.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Est-ce ki vos avoz on sierveu POP ou IMAP chal? Çouchal est eployî\n"
-"po permete di lodjer so ciste éndjole chal des adresses emile po\n"
-"des djins poleur vni lere leus messaedjes (nén viè ene eterface\n"
-"waibe, mins avou POP/IMAP).\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"I sonle ki vos rotez avou on nawea 2.2. Si l' adresse IP po vosse\n"
-"rantoele est dnêye otomaticmint pa ene copiutrece di vosse burô\n"
-"ou di vosse måjhone (adresse assinêye dinamicmint), adon i fåt\n"
-"permete çouchal.  Est-ce ki c' est vosse cas?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Est-ce ki vosse copiutrece mete si ôrlodje a l' eure tot s' sincronijhant\n"
-"avou l' ôrlodje d' ene ôte copiutrece?\n"
-"Çoula est eployî sortot pa les moyenès-grandès organizåcions Unix/Linux\n"
-"po sincronijhî l' eure so totes leus éndjoles. Si vos n' fijhoz nén pårteye\n"
-"d' ene grande eterprîjhe ou burô et n' avîz måy oyou djåzer di çoula,\n"
-"adon vos n' enn avoz seurmint nén mezåjhe."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"L' apontiaedje a stî fini.  Voloz-ve schaper les candjmints sol plake?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Dji n' sai drovî %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Dji n' sai drovî %s po î scrire: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Sierveu, Waibe/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Copiutrece rantoele (client)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Sierveu NFS, sierveu SMB, sierveu proxy, sierveu SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Burô"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Posse éndjolrece Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Usteyes po vosse Palm Pilot ou vosse Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Posse éndjolrece"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Côpe feu/Roûteu"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Sierveu di nos (DNS) et sierveu djaenès pådjes (NIS)"
-
-# FIXME: "aspougneu d' tecse" c' est purade po "text editor", cwè mete
-# po "word processor" ? Oudobén candjî "text editor" po ôte tchwè pattavå?
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programes di burô: aspougneus di tecse (kword, abiwrod), tåvleus (kspread, "
-"gnumeric), håyneus pdf, evnd."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Usteyes ki ont a vey avou l' son: djouweus mp3 ou MIDI, maxheus,..."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Lîves et Howtos so GNU/Linux et les libes programes"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Posse éndjolrece KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Vidéyo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Usteyes pol emilaedje, les copinreyes, naiviaedje waibe, transfer di "
-"fitchîs, eyet li chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Sierveu, båzes di dnêyes"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Sierveu båze di dnêyes PostgreSQL ou MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Usteyes po vos aveur pus åjhey d' apontyî vosse copiutrece"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Son"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Usteyes"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documintåcion"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Usteyes pol conzôle"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Sierveu d' emilaedje postfix, sierveu di news INN"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Posse pol rantoele daegnrece"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Posse multimedia"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Apontiaedje"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Des ôtes scribannes grafikes (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"L' evironmint di scribanne KDE, l' evironmint grafike di båze, avou ene "
-"coleccion d' usteyes ki vnèt avou"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Evironmint grafike"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Programaedje"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache eyet Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Usteyes po fé et graver des plakes lazer"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Posse di burô"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programes grafikes come li Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Lîvreyes di programaedje C et C++, programes et fitchîs *.h"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Copiutrece sierveu sol rantoele"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Sierveu, Emilaedje/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Posse di djeus"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Djoweus et aspougneus di vidéyo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafikes"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programes pasmints d' tins: årcåde, plateas, stratédjeye, evnd."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Énsembe d' usteyes po lere et evoyî des messaedjes (pine, mutt, tin...) et "
-"po naivyî so les pådjes waibe"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Årtchivaedje, emulateus, corwaitaedje"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Personelès finances"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"On evironmint grafike avou on amiståve énsembe di programes et d' usteyes "
-"pol scribanne"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clients po les protocoles k' i gn a (ssh avou)"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Pasrele pol rantoele daegnrece"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programes po vey/schoûter/candjî des sons et vidéyos"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Ôtes sicribannes grafikes"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Aspougneus, shells, usteyes po fitchîs, terminås"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programes po vos manaedjî vos çanses, come li gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "Djeus"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Manaedjmint des finances personéles"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - Gravaedje di plakes lazer"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Posse éndjolrece siyintifike"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "dji n' sai drovî /etc/sysconfig/autologin pol lere: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Voloz-ve rinonder li rantoele?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Estoz ve d' acoird?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Dji va rinonder l' eterface rantoele:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Dji va rinonder l' eterface rantoele %s. Estoz ve d' acoird?"
-
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "A pus ki vos sårîz foirt bén çu k' vos fjhoz, normålmint, vos duvrîz\n"
-#~ "prinde «/dev/hda1» (prumîre maisse plake IDE) ou bén «/dev/sda» (prumîre\n"
-#~ "plake SCSI)."
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Vochal les scrireces k' on stî apontieyes.\n"
-#~ "Vos ndè poloz radjouter ou co candjî les cenes k' î sont ddja."
diff --git a/perl-install/share/po/zh_CN.po b/perl-install/share/po/zh_CN.po
deleted file mode 100644
index 8294cdb43..000000000
--- a/perl-install/share/po/zh_CN.po
+++ /dev/null
@@ -1,8773 +0,0 @@
-# DrakX messages for zh_CN locale
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-#
-# Jesse Kuang <kjx@mandrakesoft.com>
-# DU Xiaoming <dxiaoming@mandrakesoft.com>, 2001
-#
-# Earlier translater:
-# Danny Zeng <zeng@synopsys.com>, 2000
-#
-# Earlier translaters:
-# Cheng Yuan-Chung <platin@ms31.hinet.net>, 1999
-# <c17@acer.17.o3.net>, 1999
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-09-27 13:29+0800\n"
-"Last-Translator: Jesse Kuang <kjx@mandrakesoft.com>\n"
-"Language-Team: future-cjk <future-cjk@mandrakesoft.com>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=gb2312\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr "ÅäÖÃËùÓÐÏÔʾÆ÷"
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "ʹÓà Xinerama À©Õ¹"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "ÅäÖÃÏÔ¿¨ \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr "¶àÏÔʾÆ÷ÅäÖÃ"
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"ÄúµÄϵͳ֧³Ö¶àÏÔʾÆ÷.\n"
-"ÊÇ·ñÅäÖÃ?"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "ÏÔʾ¿¨"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "Ñ¡ÔñÒ»ÖÖÏÔʾ¿¨"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "Ñ¡ÔñÒ»ÖÖ X ·þÎñÆ÷"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X ·þÎñÆ÷"
-
-#: ../../Xconfigurator.pm_.c:307
-#: ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "ÄúÏ£ÍûÓµÓÐÄĸö XFree ÅäÖÃ?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ö»ÓÐʹÓà XFree %s, ÄúµÄÏÔʾ¿¨²Å¿ÉÒԵõ½ 3D Ó²¼þ¼ÓËÙÖ§³Ö.\n"
-"XFree %s Ö§³ÖÄúµÄÏÔʾ¿¨, ËüÄÜÌṩ¸üºÃµÄ 2D Ö§³Ö."
-
-#: ../../Xconfigurator.pm_.c:323
-#: ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "ʹÓà XFree %s, ÄúµÄÏÔʾ¿¨¿ÉÒԵõ½ 3D Ó²¼þ¼ÓËÙÖ§³Ö."
-
-#: ../../Xconfigurator.pm_.c:325
-#: ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ´øÓÐÓ²¼þ 3D ¼ÓËÙµÄÖ§³Ö"
-
-#: ../../Xconfigurator.pm_.c:333
-#: ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"ʹÓà XFree %s, ÄúµÄÏÔʾ¿¨¿ÉÒԵõ½ 3D Ó²¼þ¼ÓËÙÖ§³Ö.\n"
-"×¢ÒâÕâÊÇÊÔÑé½×¶ÎµÄÖ§³Ö, Ëü¿ÉÄÜ»áʹÄúµÄµçÄÔʧȥ·´Ó¦."
-
-#: ../../Xconfigurator.pm_.c:335
-#: ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ´øÓÐÊÔÑé½×¶ÎµÄ3DÓ²¼þ¼ÓËÙÖ§³Ö"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ö»ÓÐʹÓà XFree %s, ÄúµÄÏÔʾ¿¨²Å¿ÉÒԵõ½ 3D Ó²¼þ¼ÓËÙÖ§³Ö.\n"
-"×¢ÒâÕâÊÇÊÔÑé½×¶ÎµÄÖ§³Ö, Ëü¿ÉÄÜ»áʹÄúµÄµçÄÔʧȥ·´Ó¦\n"
-"XFree %s Ö§³ÖÄúµÄÏÔʾ¿¨, ËüÄÜÌṩ¸üºÃµÄ 2D Ö§³Ö."
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (°²×°ÏÔ¿¨Çý¶¯)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree ÅäÖÃ"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "Ñ¡¶¨ÏÔʾ¿¨ÉÏ´æ´¢Æ÷µÄ´óС"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "Ñ¡Ôñ X ·þÎñÆ÷µÄ²ÎÊý"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "Ñ¡ÔñÒ»ÖÖÏÔʾÆ÷"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "ÏÔʾÆ÷"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync range\n"
-"that is beyond the capabilities of your monitor: you may damage your monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"ÓÐÁ½¸ö¹Ø¼üµÄ²ÎÊý:\n"
-"´¹Ö±¸üÐÂƵÂÊ, É趨Õû¸öÆÁĻÿÃëÖÓ¸üеĴÎÊý;\n"
-"ˮƽ¸üÐÂƵÂÊ, Õâ¸öÌرðÖØÒª, É趨ÁËÏÔʾɨÃèÏßµÄËÙÂÊ.\n"
-"\n"
-"ǧÍòСÐÄ! ²»Òª°ÑÕâЩͬ²½·¶Î§É趨µÃ³¬¹ýÄúµÄÏÔʾÆ÷µÄÄÜÁ¦.\n"
-"Èç¹ûÄú¸ã´í, ÏÔʾÆ÷»á»µµô!\n"
-"ËùÒÔû°ÑÎÕʱ, ÇëÑ¡Ôñ±£ÊصÄÉ趨."
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "ˮƽ¸üÐÂƵÂÊ"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "´¹Ö±¸üÐÂƵÂÊ"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "ÉÐδÍê³ÉÏÔʾÆ÷É趨"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "ÉÐδÍê³ÉÏÔʾ¿¨É趨"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "ÉÐδѡȡҪʹÓõĽâÎö¶È"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "ÄúÏëÒª²âÊÔÄúµÄÉ趨ֵÂð ?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "СÐÄ! ²âÊÔÕâÕÅÏÔʾ¿¨¿ÉÄÜ»áËø¶¨ÄúµÄµçÄÔ"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "²âÊÔÉ趨ֵ"
-
-#: ../../Xconfigurator.pm_.c:632
-#: ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"³¢ÊԸıäһЩ²ÎÊý"
-
-#: ../../Xconfigurator.pm_.c:632
-#: ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "·¢Éú´íÎó¡Ã"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "(ÔÚ %d ÃëÖÓºóÀ뿪)"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "ÕâÑùÉ趨ÕýÈ·Âð?"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "·¢Éú´íÎó£¬ÇëÊÔןü¸ÄһЩ²ÎÊýµÄÉ趨ֵ"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "½âÎö¶È"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "Ñ¡È¡½âÎö¶ÈÒÔ¼°ÑÕÉ«Éî¶È"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "ÏÔʾ¿¨: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 ·þÎñÆ÷: %s"
-
-#: ../../Xconfigurator.pm_.c:829
-#: ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298
-#: ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "ר¼Òģʽ"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "ÏÔʾȫ²¿"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "½âÎö¶È"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid ""
-"Keyboard layout: %s\n"
-""
-msgstr ""
-"¼üÅ̵IJ¼¾Ö: %s\n"
-""
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid ""
-"Mouse type: %s\n"
-""
-msgstr ""
-"Êó±êÀàÐÍ: %s\n"
-""
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid ""
-"Mouse device: %s\n"
-""
-msgstr ""
-"Êó±êÁ¬½ÓÉ豸: %s\n"
-""
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid ""
-"Monitor: %s\n"
-""
-msgstr ""
-"ÏÔʾÆ÷: %s\n"
-""
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid ""
-"Monitor HorizSync: %s\n"
-""
-msgstr ""
-"ÏÔʾÆ÷ˮƽ¸üÐÂƵÂÊ: %s\n"
-""
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid ""
-"Monitor VertRefresh: %s\n"
-""
-msgstr ""
-"ÏÔʾÆ÷´¹Ö±¸üÐÂƵÂÊ: %s\n"
-""
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid ""
-"Graphic card: %s\n"
-""
-msgstr ""
-"ÏÔʾ¿¨: %s\n"
-""
-
-#: ../../Xconfigurator.pm_.c:1444
-#, c-format
-msgid ""
-"Graphic card identification: %s\n"
-""
-msgstr ""
-"ÏÔʾ¿¨: %s\n"
-""
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid ""
-"Graphic memory: %s kB\n"
-""
-msgstr ""
-"ͼÐδ洢Æ÷: %s kB\n"
-""
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid ""
-"Color depth: %s\n"
-""
-msgstr ""
-"²ÊÉ«Éî¶È: %s\n"
-""
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid ""
-"Resolution: %s\n"
-""
-msgstr ""
-"½âÎö¶È: %s\n"
-""
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid ""
-"XFree86 server: %s\n"
-""
-msgstr ""
-"XFree86 ·þÎñÆ÷: %s\n"
-""
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid ""
-"XFree86 driver: %s\n"
-""
-msgstr ""
-"XFree86 Çý¶¯³ÌÐò: %s\n"
-""
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "ÕýÔÚ×¼±¸ X-Window µÄÉ趨"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "Äú´òËãÔõô×÷ ?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "¸Ä±äÏÔʾÆ÷É趨"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "¸Ä±äÏÔʾ¿¨"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "¸Ä±ä·þÎñÆ÷³ÌÐòµÄ²ÎÊý"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "¸Ä±ä½âÎö¶È"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "ÏÔʾËùÓÐÐÅÏ¢"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "ÔٴβâÊÔÉ趨ֵ"
-
-#: ../../Xconfigurator.pm_.c:1501
-#: ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "½áÊø"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"±£´æÐÞ¸Ä?\n"
-"µ±Ç°ÅäÖÃÊÇ:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "ÇëÖØеǼµ½ %s ʹÄúËù×öµÄ¸ü¸ÄÉúЧ"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "ÇëÍ˳ö, È»ºóͬʱ°´ Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "¿ª»úʱÆô¶¯ X"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"ÎÒ¿ÉÒÔ°ïÄúÉ趨ÔÚ¿ª»úʱ×Ô¶¯Æô¶¯ X£¬\n"
-"ÄúÏ£ÍûÔÚÖØпª»úÒÔºó¾Í×Ô¶¯½øÈë X Âð ?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ɫ (8 λԪ)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "3 Íò 2 ǧɫ (15 λԪ)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "6 Íò 5 ǧɫ (16 λԪ)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "1 ǧ 6 °ÙÍòÉ« (24 λԪ)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 ÒÚÉ« (32 λԪ)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "64 MB »òÒÔÉÏ"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "±ê×¼ VGA ģʽ, 640x480 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 at 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 ÏàÈÝģʽ, 1024x768 at 87 Hz ¸ôÐÐɨÃè (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 at 87 Hz ¸ôÐÐɨÃè, 800x600 at 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "À©Õ¹ Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "ÖðÐÐɨÃè SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "¸ßƵÂÊ SVGA, 1024x768 at 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "¶àƵÂÊ, ×î¸ß´ï 1280x1024 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "¶àƵÂÊ, ×î¸ß´ï  1280x1024 at 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "¶àƵÂÊ, ×î¸ß´ï 1280x1024 at 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "ÄúµÄÏÔʾÆ÷¿ÉʹÓà 1600x1200 at 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "ÄúµÄÏÔʾÆ÷¿ÉʹÓà 1600x1200 at 76 Hz"
-
-#: ../../any.pm_.c:96
-#: ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "¿ª»ú·ÖÇøµÄµÚÒ»ÉÈÇø"
-
-#: ../../any.pm_.c:96
-#: ../../any.pm_.c:121
-#: ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "Ó²Å̵ÄÖ÷Òýµ¼Çø (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "SILO °²×°"
-
-#: ../../any.pm_.c:101
-#: ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "ÔÚÄÄÀï°²×°¿ª»úÒýµ¼³ÌÐò ?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "LILO/grub °²×°"
-
-#: ../../any.pm_.c:125
-#: ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "Îı¾²Ëµ¥ LILO"
-
-#: ../../any.pm_.c:128
-#: ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "ͼÐβ˵¥ LILO"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "´ÓDOS/WindowsÆô¶¯"
-
-#: ../../any.pm_.c:137
-#: ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "¸ù·ÖÇø"
-
-#: ../../any.pm_.c:145
-#: ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "¿ª»úÒýµ¼³ÌÐòµÄÖ÷ҪѡÏî"
-
-#: ../../any.pm_.c:146
-#: ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "½«Ê¹ÓõĿª»úÒýµ¼³ÌÐò"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "¿ª»úÒýµ¼³ÌÐò°²×°"
-
-#: ../../any.pm_.c:150
-#: ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "¿ª»úÒýµ¼É豸"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ÔÚÀÏ¾ÉµÄ BIOS Éϲ»Äܹ¤×÷)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "½ô´Õ"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "½ô´Õ"
-
-#: ../../any.pm_.c:153
-#: ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "ÏÔʾģʽ"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "¿ª»úµÈºòʱ¼ä"
-
-#: ../../any.pm_.c:157
-#: ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938
-#: ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402
-#: ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "¿ÚÁî"
-
-#: ../../any.pm_.c:158
-#: ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "¿ÚÁî (ÔÙÒ»´Î)"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "ÏÞÖÆÃüÁîÐÐÑ¡Ïî"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "ÏÞÖÆ"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "ÿ´Î¿ª»úʱÇå³ý /tmp"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "¾«È·µÄ´æ´¢Æ÷´óС (ÕÒµ½ %dMB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "ÔËÐжàÖÖÅäÖÃ"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "¸æËßÎÒÓжàÉÙ Mb µÄÄÚ´æ"
-
-#: ../../any.pm_.c:170
-msgid "Option ``Restrict command line options'' is of no use without a password"
-msgstr "ûÓпÚÁî²»ÄÜʹÓà ``ÏÞ¶¨²ÎÊýÑ¡Ïî''"
-
-#: ../../any.pm_.c:171
-#: ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "ÇëÔÙÊÔÒ»´Î"
-
-#: ../../any.pm_.c:171
-#: ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "Á½´Î¿ÚÁî²»·û"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "³õʼÐÅÏ¢"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "¹Ì¼þÑÓ³Ù"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "ºËÐÄÆô¶¯³¬Ê±"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "CD Æô¶¯?"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "OF Æô¶¯?"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "ȱʡ²Ù×÷ϵͳ?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"ÏÖÔÚÓÐÏÂÁÐÌõÄ¿.\n"
-"Äú¿ÉÒÔÔö¼Ó»òÊǸü¸ÄÒÑ´æÔÚµÄÌõÄ¿"
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "Ôö¼Ó"
-
-#: ../../any.pm_.c:217
-#: ../../any.pm_.c:718
-#: ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153
-#: ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847
-#: ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "Íê³É"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "ÐÞ¸Ä"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "ÒªÔö¼ÓµÄÌõÄ¿ÊÇʲôÀàÐÍ?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "ÆäËû²Ù×÷ϵͳ (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "ÆäËû²Ù×÷ϵͳ (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "ÆäËû²Ù×÷ϵͳ (windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "Ó³ÏóÎļþ"
-
-#: ../../any.pm_.c:247
-#: ../../any.pm_.c:258
-msgid "Root"
-msgstr "¸ù·ÖÇø"
-
-#: ../../any.pm_.c:248
-#: ../../any.pm_.c:277
-msgid "Append"
-msgstr "Ôö¼Ó"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "¿É¶Áд"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "±í¸ñ"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "²»°²È«"
-
-#: ../../any.pm_.c:268
-#: ../../any.pm_.c:273
-#: ../../any.pm_.c:276
-msgid "Label"
-msgstr "±êÇ©"
-
-#: ../../any.pm_.c:270
-#: ../../any.pm_.c:281
-msgid "Default"
-msgstr "ȱʡ"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd´óС"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "ÎÞÊÓƵ"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "ɾ³ýÌõÄ¿"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "±êÇ©²»ÄÜΪ¿Õ"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "Õâ¸ö±ê¼ÇÒѾ­±»Ê¹ÓÃ"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "ÕÒµ½ %s %s ½Ó¿Ú"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "ÄúÓÐÆäËûµÄÂð ?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Äú»¹ÓÐÆäËû %s ½Ó¿ÚÂð ?"
-
-#: ../../any.pm_.c:601
-#: ../../any.pm_.c:760
-#: ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "·ñ"
-
-#: ../../any.pm_.c:601
-#: ../../any.pm_.c:759
-#: ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "ÊÇ"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "Çë¿´Ó²ÌåÐÅÏ¢"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "ÕýÔÚ°²×° %s ¿¨ %s µÄÇý¶¯³ÌÐò"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(Ä£¿é %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "ÎÒ¸ÃÊÔÓÃÄǸö %s Çý¶¯³ÌÐò ?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it should\n"
-"not cause any damage."
-msgstr ""
-"ÓÐʱºòÐèÒª¸ø %s Çý¶¯³ÌÐòÖ¸¶¨¶îÍâµÄÐÅÏ¢²ÅÄÜÕý³£ÔËÐÐ, ¾¡¹Üͨ³£²»ÐèÒª.\n"
-"Äú¿ÉÒÔÔÚÕâÀïÖ¸¶¨Ò»Ð©¶îÍâµÄÑ¡Ïî, Ò²¿ÉÒÔÈÃÇý¶¯³ÌÐò̽²âÄúµÄ»úÆ÷, ×Ô¶¯\n"
-"È·¶¨ÐèÒªµÄÐÅÏ¢. ż¶û»á·¢Éú»úÆ÷ÔÚ̽²âÖÐÍ£Ö¹·´Ó¦, ²»¹ýÕâ²»»áËð»µÊ²Ã´. \n"
-"Äú¾ö¶¨ÔõÑù?"
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "×Ô¶¯Ì½²â"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "Ö¸¶¨²ÎÊý"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "ÇëÖ¸¶¨Ä£¿é %s µÄ²ÎÊý"
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"ÏÖÔÚ¸øÄ£¿é %s Ö¸¶¨ËüµÄÑ¡Ïî. \n"
-"Ñ¡ÏîµÄ¸ñʽÊÇ ``name=value name2=value2...'' \n"
-"ÀýÈ磬 ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "Ä£¿é²ÎÊý"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Ä£¿é %s ¼ÓÔØʧ°Ü.\n"
-"ÄúÒª³¢ÊÔÆäËûµÄ²ÎÊýÂð ?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "(ÒѾ­Ôö¼ÓÁË %s)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "¿ÚÁîÌ«¼òµ¥"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "Çë¸ø³öÓйØÓû§Ãû"
-
-#: ../../any.pm_.c:710
-msgid "The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Óû§Ãû³ÆÖ»ÄÜÓÐСд×Öĸ¡¢Êý×Ö£¬`-' ºÍ `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "Õâ¸öÓû§Ãû³ÆÒѾ­ÓÐÁË"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "Ôö¼ÓÓû§"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"ÇëÊäÈëÒ»¸öÓû§\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "½ÓÊÜÓû§"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "ÕæʵÐÕÃû"
-
-#: ../../any.pm_.c:729
-#: ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "̞"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "ͼ±ê"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "×Ô¶¯µÇ¼"
-
-#: ../../any.pm_.c:757
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"ÎÒ¿ÉÒÔ°ïÄúÉ趨ÔÚ¿ª»úʱ×Ô¶¯Â¼ÈëÓû§\n"
-"ÄúÏ£ÍûʹÓÃÕâ¸öÌØÐÔÂð ?"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "Ñ¡ÔñȱʡµÄÓû§:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "Ñ¡ÔñÒªÔËÐеĴ°¿Ú¹ÜÀí³ÌÐò:"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "ÇëÑ¡ÔñÒ»ÖÖҪʹÓõÄÓïÑÔ."
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "Äú¿ÉÒÔÔÚ°²×°Ö®ºóÑ¡ÔñÆäËû¿ÉÓõÄÓïÑÔ"
-
-#: ../../any.pm_.c:785
-#: ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "È«²¿"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-""
-msgstr ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-""
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr " /boot ÖÐûÓÐ×ã¹»¿Õ¼ä"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "×ÀÃæ"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "¿ªÊ¼²Ëµ¥"
-
-#: ../../bootloader.pm_.c:972
-#, c-format
-msgid ""
-"You can't install the bootloader on a %s partition\n"
-""
-msgstr ""
-"%s ·ÖÇø²»ÄÜ°²×°¿ª»úÒýµ¼³ÌÐò\n"
-""
-
-#: ../../bootlook.pm_.c:46
-msgid ""
-"no help implemented yet.\n"
-""
-msgstr ""
-"°ïÖú¹¦ÄÜδʵÏÖ.\n"
-""
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Æô¶¯ÅäÖÃ"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "/_FÎļþ"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "/Îļþ/_QÍ˳ö"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<¿ØÖÆ>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "ÐÂÐÍÏÔʾÆ÷"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "ÐÂÐÍÏÔʾÆ÷"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "´«Í³ÏÔʾÆ÷"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "´«Í³Gtk+ÏÔʾÆ÷"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Æô¶¯Ê±ÔËÐÐAurora"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Lilo/grubģʽ"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"ÄãĿǰʹÓà %s ×÷Ϊ¿ª»ú³ÌÐò¹ÜÀíÆ÷.\n"
-"µã»÷''ÅäÖÃ''ÔËÐÐÅäÖþ«Áé."
-
-#: ../../bootlook.pm_.c:104
-#: ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280
-#: ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "ÅäÖÃ"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "¿ª»úÒýµ¼Ä£Ê½"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "ϵͳģʽ"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "Æô¶¯Ê±ÔËÐÐX´°¿Ú"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "²»£¬²»Òª×Ô¶¯Â¼Èë"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "ÊÇ, ÒÔ(Óû§,×ÀÃæ)¼Èë"
-
-#: ../../bootlook.pm_.c:155
-#: ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140
-#: ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320
-#: ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507
-#: ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "È·¶¨"
-
-#: ../../bootlook.pm_.c:156
-#: ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308
-#: ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416
-#: ../../my_gtk.pm_.c:419
-#: ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158
-#: ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115
-#: ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313
-#: ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658
-#: ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "È¡Ïû"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ÎÞ·¨´ò¿ª /etc/inittab ¶Á: %s"
-
-#: ../../bootlook.pm_.c:336
-#: ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "°²×° LILO ʧ°Ü£¬³öÏÖÏÂÁдíÎó:"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93
-#: ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d ·ÖÖÓ"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 ·ÖÖÓ"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr " %d ÃëÖÓ"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "ÇëÏȱ¸·ÝÄúµÄÊý¾Ý"
-
-#: ../../diskdrake.pm_.c:100
-#: ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810
-#: ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "Çë×ÐϸÔĶÁ!!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Èç¹ûÄú¼Æ»®²ÉÓà aboot, Çë×¢ÒâÔÚ´ÅÅ̵ĿªÍ·Î»ÖÃÁôÏÂÒ»¶Î×ÔÓÉ¿Õ¼ä\n"
-"( 2048 ÉÈÇø¾Í×ã¹»ÁË)"
-
-#: ../../diskdrake.pm_.c:122
-#: ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328
-#: ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310
-#: ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120
-#: ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "´íÎó"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "·¨Ê¦"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "н¨"
-
-#: ../../diskdrake.pm_.c:203
-#: ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "Ô¶¶Ë"
-
-#: ../../diskdrake.pm_.c:208
-#: ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352
-#: ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "×°Ôصã"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "Ñ¡Ïî"
-
-#: ../../diskdrake.pm_.c:211
-#: ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534
-#: ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "ÀàÐÍ"
-
-#: ../../diskdrake.pm_.c:223
-#: ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "жÔØ"
-
-#: ../../diskdrake.pm_.c:224
-#: ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "×°ÔØ"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "Ñ¡Ôñ²Ù×÷"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"ÄúÓÐÒ»¸öºÜ´óµÄ FAT ·ÖÇø£¬\n"
-"(ͨ³£ÊÇ Microsoft Dos/Windows Õ¼ÓõÄ).\n"
-"½¨ÒéÄúÏÈÖØÉèÕâ¸ö·ÖÇøµÄ´óС\n"
-"(µãÖÐËü£¬È»ºó°´ \"¸Ä±ä´óС\")"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "ÇëÑ¡ÖÐÒ»¸ö·ÖÇø"
-
-#: ../../diskdrake.pm_.c:240
-msgid "Please click on a media"
-msgstr "ÇëÑ¡ÖÐÒ»¸ö½éÖÊ"
-
-#: ../../diskdrake.pm_.c:243
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr ""
-"Çëµã»÷ÒÔÉϵİ´Å¥\n"
-"\n"
-"»òʹÓà \"н¨\""
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr "ʹÓà \"н¨\""
-
-#: ../../diskdrake.pm_.c:263
-#: ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "ÏêϸÇé¿ö"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Journalised FS"
-msgstr "ÈÕÖ¾Îļþϵͳ"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396
-#: ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "¿Õ"
-
-#: ../../diskdrake.pm_.c:396
-#: ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433
-#: ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "ÆäËû"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "ÎļþϵͳÀàÐÍ:"
-
-#: ../../diskdrake.pm_.c:417
-#: ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "н¨"
-
-#: ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "ÓÃ ``%s'' ´úÌæ"
-
-#: ../../diskdrake.pm_.c:419
-#: ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "ɾ³ý"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "ÇëÏÈ×ö ``Unmount'' "
-
-#: ../../diskdrake.pm_.c:424
-#: ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid "After changing type of partition %s, all data on this partition will be lost"
-msgstr "Ôڸıä·ÖÇø±í %s µÄÀàÐÍÖ®ºó, ÔÚÕâ¸ö·ÖÇøÉϵÄËùÓÐ×ÊÁϽ«Òª±»Çå³ý"
-
-#: ../../diskdrake.pm_.c:478
-#: ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "ÄúÏë°ÑÉ豸 %s ×°Ôص½ÄÄÀï?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "×°ÔØÑ¡Ïî"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr "±äÁ¿"
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "¿ÉÒƶ¯½éÖÊ"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "¸Ä±äÀàÐÍ"
-
-#: ../../diskdrake.pm_.c:533
-#: ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "ÄúÐèҪʹÓÃÄÄÖÖÎļþϵͳ?"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "ɨÃèÓÐЧµÄNFS¹²Ïí×ÊÔ´"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "ɨÃè·þÎñÆ÷ %s µÄÓÐЧµÄNFS¹²Ïí×ÊÔ´"
-
-#: ../../diskdrake.pm_.c:578
-#: ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr "Èç¹ûÉÏÊöÁбíÖÐûÓÐÄãÒªµÄÏî, ÇëÊäÈë:"
-
-#: ../../diskdrake.pm_.c:581
-#: ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "·þÎñÆ÷"
-
-#: ../../diskdrake.pm_.c:582
-#: ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "¹²Ïí×ÊÔ´"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "ɨÃèÓÐЧµÄsamba¹²Ïí×ÊÔ´"
-
-#: ../../diskdrake.pm_.c:626
-#: ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "ɨÃè·þÎñÆ÷ %s µÄÓÐЧµÄsamba¹²Ïí×ÊÔ´"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "Ñ¡Ôñ·ÖÇø"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "Ñ¡ÔñÆäËû·ÖÇø"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Í˳ö"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "½øÈëר¼Òģʽ"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "½øÈëÕý³£Ä£Ê½"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "³·Ïú"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "ðÏÕ¼ÌÐøÖ´ÐÐ?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "²»±£´æ¸Ä±ä¾ÍÍ˳ö"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "²»Ð´Èë·ÖÇø±í¶øÍ˳ö?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "ÄúÏëÒª±£´æ /etc/fstab ÐÞ¸ÄÂð ?"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "×Ô¶¯·ÖÅä"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "È«²¿Çå³ý"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "¸ü¶à"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "Ó²ÅÌÐÅÏ¢"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "ûÓÐ×ã¹»¿ÕÏпռä×Ô¶¯·ÖÅä¸øзÖÇø"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "Ö÷ÇøÊýÄ¿ÒѾ­ÂúÁË"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "ÎÒÎÞ·¨ÔÙÐÂÔöÈκηÖÇøÁË"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid "To have more partitions, please delete one to be able to create an extended partition"
-msgstr "Èç¹ûÐèÒª¸ü¶àµÄ·ÖÇø£¬Çëɾ³ýÒ»¸öÖ÷·ÖÇøÒÔ´´½¨À©Õ¹·ÖÇø"
-
-#: ../../diskdrake_interactive.pm_.c:285
-msgid "Save partition table"
-msgstr "±£´æ·ÖÇø±í"
-
-#: ../../diskdrake_interactive.pm_.c:286
-msgid "Restore partition table"
-msgstr "ÕýÔÚ³¢ÊÔ»Ö¸´·ÖÇø±í"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "ÕýÔÚ³¢ÊÔÐÞ¸´·ÖÇø±í"
-
-#: ../../diskdrake_interactive.pm_.c:289
-msgid "Reload partition table"
-msgstr "ÖØжÁÈ¡·ÖÇø±í"
-
-#: ../../diskdrake_interactive.pm_.c:293
-msgid "Removable media automounting"
-msgstr "×Ô¶¯×°ÔØ¿ÉÒƶ¯½éÖÊ"
-
-#: ../../diskdrake_interactive.pm_.c:301
-#: ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "Ñ¡ÔñÎļþ"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"±¸·Ý·ÖÇø±íµÄ´óСºÍÔ­À´µÄ²»Í¬\n"
-"»¹ÓмÌÐø ?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "¾¯¸æ"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"ÇëÔÚÇý¶¯Æ÷ÖвåÈëÒ»ÕÅÈíÅÌ\n"
-"ÕâÕÅÈíÅÌÉÏËùÓеÄÊý¾Ý½«Òª±»Çå³ý"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "ÕýÔÚ³¢ÊÔ»Ö¸´·ÖÇø±í"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "ÏêϸÐÅÏ¢"
-
-#: ../../diskdrake_interactive.pm_.c:354
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "¸Ä±ä´óС"
-
-#: ../../diskdrake_interactive.pm_.c:355
-#: ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "Òƶ¯"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "¸ñʽ»¯"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "¿ÉÆô¶¯"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "¼ÓÈë´ÅÅÌÕóÁÐ"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "¼ÓÈë´ÅÅÌÕóÁÐ"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "´Ó´ÅÅÌÕóÁÐÖÐÒƳö"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "´Ó´ÅÅÌÕóÁÐÖÐÒƳö"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "¸ü¸Ä´ÅÅÌÕóÁÐÉ趨"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "ÓÃÓڻػ·"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "´´½¨Ò»¸öеķÖÇø"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "¿ªÊ¼ÉÈÇø: "
-
-#: ../../diskdrake_interactive.pm_.c:414
-#: ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "´óС (MB) "
-
-#: ../../diskdrake_interactive.pm_.c:415
-#: ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "ÎļþϵͳÀàÐÍ: "
-
-#: ../../diskdrake_interactive.pm_.c:416
-#: ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "×°Ôصã:"
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "Æ«ºÃÉ趨"
-
-#: ../../diskdrake_interactive.pm_.c:462
-msgid "Remove the loopback file?"
-msgstr "ɾ³ý¸ñʽ»¯»Ø»·(loopback)Îļþ?"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "¸Ä±ä·ÖÇøÀàÐÍ"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "°Ñext2Çл»µ½ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "ÄúÏë°Ñ»Ø»·(loopback)Îļþ %s ×°Ôص½ÄÄÀï?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"ÎÞ·¨È¡ÏûÉ趨µÄ×°Ôصã, Õâ¸ö·ÖÇøÕýÓÃÓڻػ·.\n"
-"ÐèÒªÏÈÈ¡Ïû»Ø»·"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "¼ÆËã fat ÎļþϵͳµÄ±ß½ç"
-
-#: ../../diskdrake_interactive.pm_.c:549
-#: ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "ÕýÔڸıä´óС"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "²»ÄܸıäÕâ¸ö·ÖÇøµÄ´óС"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "Ó¦¸ÃÏȱ¸·ÝÔÚÕâ¸ö·ÖÇøÉϵÄËùÓÐÊý¾Ý"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "¸Ä±ä·ÖÇø %s µÄ´óС֮ºó, Õâ¸ö·ÖÇøÉÏÏÖÓеÄËùÓÐ×ÊÁϽ«±»Çå³ý"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "Ñ¡ÔñеĴóС"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "дóС (MB): "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "ÄúÏëÒƶ¯µ½ÄĸöÅÌ ?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "ÉÈÇø"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "ÄúÏëÒƶ¯µ½ÄĸöÉÈÇø ?"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "Òƶ¯ÖÐ"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "ÕýÔÚÒƶ¯·ÖÇø..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "Ñ¡Ôñ¼ÓÈëÒ»¸öÒÑ´æÔÚµÄ RAID"
-
-#: ../../diskdrake_interactive.pm_.c:658
-#: ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "н¨"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "Ñ¡Ôñ¼ÓÈëÒ»¸öÒÑ´æÔÚµÄ LVM"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "LVMÃû³Æ?"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "Õâ¸ö·ÖÇø²»Äܱ»ÓÃÓڻػ·"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "»Ø»·"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "»Ø»·ÎļþÃû: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-msgid "Give a file name"
-msgstr "ÎļþÃû"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "ÎļþÒѾ­±»ÁíÒ»¸ö»Ø»·Ê¹ÓÃ, ÇëÑ¡ÔñÆäËû"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "ÎļþÒѾ­´æÔÚ. ʹÓÃÏÖÓеÄÎļþ?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "É豸"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "¼¶±ð"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "×é¿é´óС"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "СÐÄ: Õâ¸ö²Ù×÷ÓÐΣÏÕ."
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "ÇëÎÊÄú·ÖÇøÀàÐÍ?"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > 1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't need /boot"
-msgstr ""
-"¶Ô²»Æð, ÎÒ²»ÄÜÔÚÓ²Å̵ÄÖùÃæ 1024 Ö®ºó´´½¨ /boot ·ÖÇø.\n"
-"Èç¹ûÄúʹÓà LILO, Ëüû·¨Õý³£¹¤×÷; ¼ÙÈçÄú²»Ê¹Óà LILO, \n"
-"Äú²»ÐèÒª´´½¨ /boot ·ÖÇø"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"ÄúÑ¡Ôñ×÷Ϊ¸ù (/) ¼ÓÈëµÄ·ÖÇø, ÔÚÓ²ÅÌÉϵÄλÖÃλÓÚµÚ 1024 ÖùÃæÖ®ºó,\n"
-"²¢ÇÒÄúûÓд´½¨ /boot ·ÖÇø.\n"
-"Èç¹ûÄú¼Æ»®Ê¹Óà LILO Æô¶¯¹ÜÀí³ÌÐò, ÇëÔÚÊʵ±Î»ÖüÓÈë /boot ·ÖÇø."
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"ÄúÑ¡ÔñÁË°ÑÈí¼þ RAID ·ÖÇø×÷Ϊ¸ù (/).\n"
-"Èç¹ûûÓÐ /boot ·ÖÇø, ÎÒÃǵĿª»úÒýµ¼³ÌÐòÎÞ·¨´¦ÀíÕâÖÖÇé¿ö.\n"
-"ËùÒÔ, ÇëÔö¼ÓÒ»¸ö /boot ·ÖÇø."
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Çý¶¯Æ÷ %s µÄ·ÖÇø±í½«»áдÈë´ÅÅÌÖÐ !"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Äú±ØÐèÖØпª»úʹÄú×öµÄ¸ü¶¯ÉúЧ"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "¸ñʽ»¯·ÖÇø %s Ö®ºó, ÔÚÕâ¸ö·ÖÇøÉϵÄËùÓÐ×ÊÁϽ«Òª±»Çå³ý"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "ÕýÔÚ¸ñʽ»¯"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "ÕýÔÚ¸ñʽ»¯»Ø»·(loopback)Îļþ %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "ÕýÔÚ¸ñʽ»¯·ÖÇø %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Hide files"
-msgstr "Òþ²ØÎļþ"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Move files to the new partition"
-msgstr "Òƶ¯Îļþµ½Ð·ÖÇø"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Ŀ¼ %s ÒѾ­°üº¬Êý¾Ý\n"
-"(%s)"
-
-#: ../../diskdrake_interactive.pm_.c:906
-msgid "Moving files to the new partition"
-msgstr "ÕýÔÚÒƶ¯Îļþµ½Ð·ÖÇø"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr "¿½±´ %s"
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, c-format
-msgid "Removing %s"
-msgstr "ɾ³ý %s"
-
-#: ../../diskdrake_interactive.pm_.c:937
-#: ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "É豸: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid ""
-"DOS drive letter: %s (just a guess)\n"
-""
-msgstr ""
-"DOS ϵÄÅÌ·û: %s ( Ö»ÊDz²â )\n"
-""
-
-#: ../../diskdrake_interactive.pm_.c:942
-#: ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "ÀàÐÍ: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "Ãû³Æ: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid ""
-"Start: sector %s\n"
-""
-msgstr ""
-"¿ªÊ¼: µÚ %s ÉÈÇø\n"
-""
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "´óС: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", µÚ %s ÉÈÇø"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid ""
-"Cylinder %d to cylinder %d\n"
-""
-msgstr ""
-"µÚ %d ÖùÃæµ½µÚ %d ÖùÃæ\n"
-""
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid ""
-"Formatted\n"
-""
-msgstr ""
-"ÒѸñʽ»¯\n"
-""
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid ""
-"Not formatted\n"
-""
-msgstr ""
-"δ¸ñʽ»¯\n"
-""
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid ""
-"Mounted\n"
-""
-msgstr ""
-"ÒÑ×°ÔØ\n"
-""
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid ""
-"RAID md%s\n"
-""
-msgstr ""
-"´ÅÅÌÕóÁÐ (RAID) md%s\n"
-""
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-""
-msgstr ""
-"»Ø»·Îļþ:\n"
-"   %s\n"
-""
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-""
-msgstr ""
-"Ô¤ÉèµÄ¿ª»ú·ÖÇø\n"
-"    (¸ø MS-DOS ¿ª»ú³ÌÐòÓõÄ, ¸ú lilo ÎÞ¹Ø)\n"
-""
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid ""
-"Level %s\n"
-""
-msgstr ""
-"¼¶±ð %s\n"
-""
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid ""
-"Chunk size %s\n"
-""
-msgstr ""
-"×é¿é´óС %s\n"
-""
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid ""
-"RAID-disks %s\n"
-""
-msgstr ""
-"RAID ´ÅÅÌ %s\n"
-""
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "»Ø»·ÎļþÃû³Æ: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-""
-msgstr ""
-"\n"
-"±¾·ÖÇøÊÇÇý¶¯·ÖÇø\n"
-"±£Áô²»¶¯\n"
-""
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-""
-msgstr ""
-"\n"
-"±¾ÌرðÆô¶¯·ÖÇø\n"
-"ÊDZ£Áô¸øË«ÖØÆô¶¯ÏµÍ³\n"
-""
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid ""
-"Size: %s\n"
-""
-msgstr ""
-"´óС: %s\n"
-""
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid ""
-"Geometry: %s cylinders, %s heads, %s sectors\n"
-""
-msgstr ""
-"Ó²Å̲ÎÊý: %s ÖùÃæ, %s ´ÅÍ·, %s ÉÈÇø\n"
-""
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "ÐÅÏ¢: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid ""
-"LVM-disks %s\n"
-""
-msgstr ""
-"LVM ´ÅÅÌ %s\n"
-""
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid ""
-"Partition table type: %s\n"
-""
-msgstr ""
-"·ÖÇø±íÀàÐÍ: %s\n"
-""
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid ""
-"on bus %d id %d\n"
-""
-msgstr ""
-"ÔÚ×ÜÏß %d id %d ÉÏ\n"
-""
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "Ñ¡Ïî: %s"
-
-#: ../../fs.pm_.c:447
-#: ../../fs.pm_.c:457
-#: ../../fs.pm_.c:461
-#: ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469
-#: ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s, ¸ñʽ»¯ %s ʧ°Ü"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "²»ÖªµÀÈçºÎ¸ñʽ»¯ %s ³É %s ÀàÐÍ"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "×°ÔØʧ°Ü"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck ʧ°Ü, Í˳öÂë %d »ò ÐźŠ%d"
-
-#: ../../fs.pm_.c:597
-#: ../../fs.pm_.c:603
-#: ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "×°ÔØʧ°Ü: "
-
-#: ../../fs.pm_.c:618
-#: ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "жÔØ %s ʧ°Ü: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "¼òµ¥"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "·þÎñÆ÷"
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Äú²»ÄÜ°Ñ JFS ÓÃÓÚСÓÚ 16 MB µÄ·ÖÇø"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Äú²»ÄÜ°Ñ ReiserFS ÓÃÓÚСÓÚ 32 MB µÄ·ÖÇø"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "ÔØÈëµã±ØÐèÒªÒÔ / Ϊ¿ªÍ·"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid ""
-"There is already a partition with mount point %s\n"
-""
-msgstr ""
-"ÒѾ­ÓÐÒ»¸ö·ÖÇøµÄ×°ÔصãÊÇ %s\n"
-""
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "²»ÄÜÓÃLVMÂß¼­¾í×ö %s ÔØÈëµã"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr "Õâ¸öĿ¼Ӧ¸Ã±£ÁôÔÚ¸ù·ÖÇøÄÚ"
-
-#: ../../fsedit.pm_.c:480
-msgid ""
-"You need a true filesystem (ext2, reiserfs) for this mount point\n"
-""
-msgstr ""
-"Õâ¸ö¼ÓÔصãÐèÒªÒ»¸öÕæÕýµÄÎļþϵͳ(ext2, reiserfs)\n"
-""
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "ÔÚ´ò¿ª %s дÈëʱ·¢Éú´íÎó: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid "An error has occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"·¢Éú´íÎó! н¨ÎļþϵͳʱÕÒ²»µ½¿ÉÓõÄÉ豸¡£\n"
-"Çë¼ì²éÄúµÄÓ²¼þÒÔÈ·¶¨ÎÊÌâµÄÔ­Òò !"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "ÄúÏÖÔÚÒ»¸ö·ÖÇøҲûÓÐ!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux ÊÇÒ»¸ö¶àÓû§ÏµÍ³, ÇëÔĶÁ \"Óû§ÊÖ²á\"\n"
-"µã»÷ ½ÓÊÜ, Ôö¼ÓÐÂÓû§, Ñ¡Ôñ ½áÊø, Íê³É\n"
-"µã»÷ ¸ß¼¶, Äã¿ÉÒÔÐÞ¸ÄÓû§µÄÃüÁî½âÊÍÆ÷ shell."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"ÒÔÉÏÊǼì²âµ½µÄLinux·ÖÇø. Äã¿ÉÒÔ²ÉÓ÷ÖÇø¾«Áé´´½¨µÄ·ÖÇø,Èç¹ûÄãÒªÐÞ¸Ä, ÖÁÉٵö¨Òå\n"
-"root¸ù·ÖÇø(\"/\"). ·ÖÇø̫СµÄ»°, ¿ÉÄÜÎÞ·¨°²×°×ã¹»µÄÈí¼þ°ü.\n"
-"ÄãÒ²¿ÉÒÔ´´½¨\"/home\"·ÖÇøÀ´´æ·ÅÓû§Êý¾Ý.\n"
-"\n"
-"\n"
-"ÿ¸ö·ÖÇø°´ \"Ãû³Æ\",\"ÈÝÁ¿\"Áбí."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake°²×°ÐèÒªºÃ¼¸ÕÅCDROM. DrakeX\n"
-"»áÖªµÀÏàÓ¦µÄÈí¼þ°üÔÚÄÄÕÅCDROM, ²¢»áµ¯³öµ±Ç°CDÒªÇóÄã¸ü»»ÏàÓ¦µÄCD."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"ÏÖÔÚÊÇÖ¸¶¨°²×°³ÌÐòµÄʱºòÁË.\n"
-"\n"
-"³ÌÐò°²ÏàÓ¦µÄ×é·ÖÀà. ·ÖÀàÓÐ:\n"
-"\n"
-"* \"¹¤×÷Õ¾\": °²×°¹¤×÷Õ¾×é.\n"
-"\n"
-"* \"¿ª·¢\": °²×°¿ª·¢ËùÐèµÄÏàÓ¦µÄ×é.\n"
-"\n"
-"* \"·þÎñÆ÷\": °²×°ÆÕͨ·þÎñÆ÷.\n"
-"\n"
-"* \"ͼÐλ·¾³\": °²×°Í¼Ðλ·¾³¹¤×÷Õ¾.\n"
-"\n"
-"Ñ¡ÖÐ\"µ¥¸öÈí¼þ°üÑ¡Ôñ\", Èç¹ûÄãÒªÊÖ¹¤¿ØÖÆÈí¼þ°üÑ¡Ôñ.\n"
-"\n"
-"\"Éý¼¶\"°²×°Ê±, Äã¿ÉÒÔÈ¡ÏûËùÓÐ×éµÄÑ¡Ôñ¶ø²»»á°²×°ÐµÄÈí¼þ°ü,\n"
-"ÓÃÓÚÐÞ¸´ÏµÍ³»òÉý¼¶ÏµÍ³."
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"ÏÖÔÚÄú¿ÉÒÔÑ¡ÔñÔÚ¿ª»úʱÆô¶¯ÄÄЩ·þÎñ.\n"
-"\n"
-"\n"
-"Òƶ¯ÄúµÄÊó±êµ½Ñ¡ÏîÉÏÃæ»áµ¯³ö°ïÖúÌáʾ, ½âÊÍÕâ¸ö·þÎñµÄ×÷ÓÃ.\n"
-"\n"
-"\n"
-"Èç¹ûÄúµÄ»úÆ÷½«×÷Ϊ·þÎñÆ÷, ÔÚÕâÒ»²½Çë¸ñÍâСÐÄ: Çë²»ÒªÆô¶¯ÈκÎ\n"
-"Äú²»ÐèÒªµÄ·þÎñ. Çë×¢ÒâijЩ·þÎñ¶Ô·þÎñÆ÷ÓÐDZÔÚµÄΣÏÕ.ͨ³£, ֻѡÔñÄúȷʵҪʹÓõÄÄÇЩ·þÎñ."
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr "GNU/Linux ÄÚ²¿Ê¹Óà GMT (¸ñÁÖÄáÖαê׼ʱ¼ä), È»ºó¸ù¾ÝÄúÑ¡ÔñµÄʱÇøת»»³Éµ±µØʱ¼ä."
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Èç¹ûDrakXÎÞ·¨ÕÒµ½ºÏÊʵÄͼÐο¨, Äã¿ÉÔÚ\n"
-"\"¸Ä±äͼÐο¨\",Ñ¡Ôñ\"ÆäËü¿¨\", Ñ¡Ôñ\n"
-"\"FBDev\", È»ºóÔÙ²âÊÔ."
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr "×îºó, Äã»á±»ÎÊÊÇ·ñ¿ª»ú½øÈëͼÐνçÃæ."
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"ÕâÀï, ÄúÐèÒªÔÚÓ²ÅÌÉÏÑ¡ÔñÓÃÀ´°²×° Mandrake Linux ²Ù×÷ϵͳµÄλÖÃ.\n"
-"Èç¹û´ÅÅÌÊÇ¿ÕµÄ, »òÕßÏÖ´æµÄ²Ù×÷ϵͳʹÓÃÁË´ÅÅÌÉϵÄÈ«²¿¿Õ¼ä, ÄúÐèÒª\n"
-"½øÐзÖÇø. »ù±¾ÉÏ, ×öÓ²ÅÌ·ÖÇø¾ÍÊÇ°ÑËüÔÚÂß¼­ÉÏ»®·Ö³É²¿·Ö, \n"
-"ΪÄúа²×°µÄ  Mandrake Linux ϵͳÁô³ö¿ÉÓÿռä.\n"
-"\n"
-"\n"
-"ÓÉÓÚ·ÖÇø¹ý³ÌµÄºó¹û¾­³£ÊDz»¿ÉÄæת\n"
-"Õâ¸ö·¨Ê¦³ÌÐò¼ò»¯ÁËÕâЩ¹ý³Ì, ÇëÄú²»±Ø׿±, ÔÚ¿ªÊ¼Ö®Ç°¶à¿´¿´ÊÖ²á.\n"
-"\n"
-"\n"
-"ÄúÐèÒª×îÉÙÁ½¸ö·ÖÇø.  Ò»¸öÊDzÙ×÷ϵͳ±¾ÉíʹÓÃ, \n"
-"ÁíÒ»¸öÓÃ×÷ÐéÄâÄÚ´æ( Ò²½Ð×ö Swap).\n"
-"\n"
-"\n"
-"Èç¹ûÊÂÏÈÒѾ­É趨 (À´×ÔÒÔÇ°µÄ°²×°»òÆäËü·ÖÇø¹¤¾ß), ÄúÖ»ÐèÒª´ÓÖÐÑ¡Ôñr\n"
-"ÓÃÄÄЩ°²×° Linux ϵͳ.\n"
-"\n"
-"\n"
-"Èç¹û·ÖÇøûÓÐÊÂÏȶ¨Òå, Äú¾ÍÒª×Ô¼º½¨Á¢ËüÃÇ. \n"
-"Äú¿ÉÒÔʹÓÃÉÏÊöµÄ·¨Ê¦. ¸ù¾ÝÄúµÄ´ÅÅ̵ÄÅäÖÃ, ¿ÉÄÜÓÐÕâЩ²»Í¬\n"
-"µÄ°ì·¨:\n"
-"\n"
-"* ʹÓÃÏÖÓеķÖÇø:  ·¨Ê¦ÔÚÄúµÄÓ²ÅÌÉϼì²âµ½ÁËÒ»¸ö»ò¸ü¶àLinux ·ÖÇø \n"
-" ÄúÏëÒª±£ÁôËüÃÇ, ¾ÍÑ¡ÔñÕâ¸öÑ¡Ïî. \n"
-"\n"
-"\n"
-"* Çå³ýÕû¸ö´ÅÅÌ: Èç¹ûÄúÏ£ÍûÇå³ý´ÅÅÌÉÏËùÓеķÖÇøºÍÊý¾Ý. ÒÔа²×°µÄ\n"
-"  Mandrake Linux ϵͳ´úÌæ, ¾Í²ÉÓÃÕâ¸öÑ¡Ïî.  ÇëСÐIJÉÓÃÕâ¸öÑ¡Ïî, \n"
-"  Ò»µ©È·ÈÏ, Äú¾ÍÎÞ·¨³·ÏúÄúµÄ¾ö¶¨..\n"
-"\n"
-"\n"
-"* ʹÓà Windows ·ÖÇøµÄ¿ÕÓà¿Õ¼ä: Èç¹ûÄúµÄÓ²ÅÌÉÏ °²×°ÓÐMicrosoft Windows \n"
-" ²¢ÇÒÕ¼ÓÃÁËÈ«²¿µÄ¿Õ¼ä, Äú±ØÐëΪ Linux ´´½¨ÐµķÖÇø, Äú¿ÉÒÔɾ³ýÕû¸ö\n"
-"  Microsoft Windows ·ÖÇøºÍÊý¾Ý(¼û \"Çå³ýÕû¸öÓ²ÅÌ\" »ò \"ר¼Òģʽ\"·½°¸), Ò²¿ÉÒԸıä Microsoft Windows ·ÖÇøµÄ´óС. \n"
-" ¸Ä±ä´óС²»»áË𻵷ÖÇøÖеÄÊý¾Ý. ÎÒÃÇÍƼöÕâ¸ö·½·¨, Èç¹ûÄúÐèÒª\n"
-" ÔÚͬһ̨µçÄÔÉÏ Ê¹Óà Mandrake Linux ºÍ Microsoft Windows .\n"
-"\n"
-"\n"
-"  Ñ¡Ôñ֮ǰÇëÄúÀí½âÄúµÄ Microsoft  Windows ·ÖÇø½«±ÈÏÖÔÚËõСһЩ\n"
-" ÄúÔÚ Microsoft Windows Ï»ᷢÏÖ¿ÕÏеĴÅÅ̱äÉÙÁË. \n"
-"\n"
-"\n"
-"* ר¼Òģʽ: Èç¹ûÄúϲ»¶ÊÖ¹¤×öÓ²ÅÌ·ÖÇø, ¾ÍÑ¡ÔñÕâ¸öÑ¡Ïî.\n"
-"  ¿ªÊ¼Ö®Ç°Çë×Ðϸ¿¼ÂÇ.  Õâ¸ö·½·¨·Ç³£ÓÐÁ¦Ò²·Ç³£Î£ÏÕ.\n"
-"  Äú¿ÉÄÜÇáÒ׵ĻٻµËùÓеÄÊý¾Ý. Èç¹ûÄú²»Çå³þÇ벻ҪʹÓÃËü.."
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"д´½¨µÄ·ÖÇø¶¼±ØÐë¸ñʽ»¯.\n"
-"\n"
-"\n"
-"ÄãÒ²¿ÉÒÔÓøñʽ»¯É¾³ý·ÖÇøÉϵÄÊý¾Ý.\n"
-"\n"
-"\n"
-"µã»÷\"È·ÈÏ\"¿ªÊ¼¸ñʽ»¯.\n"
-"\n"
-"\n"
-"µã»÷\"È¡Ïû\"Ñ¡ÔñÆäËû·ÖÇø°²×°Linux."
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"ÄúµÄMandrake²Ù×÷ϵͳÕýÔÚ°²×°. °²×°½«»¨ºÃ¼¸·ÖÖÓ.\n"
-"(°²×°Ê±¼äÒÀ¾ÝÄúµÄ¼ÆËã»úËٶȺÍÄúËùÑ¡µÄ°²×°Èí¼þ°ü¶ø²»Í¬).\n"
-"\n"
-"\n"
-"ÇëÄÍÐĵȴý."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"ÕâÀï,ÄãÐèҪѡÔñ°²×°MandrakeµÄ·ÖÇø. Èç¹ûÊÇÒ»¸ö¿ÕÅÌ»òÕû¸öÅÌ°²×°Á˲Ù×÷ϵͳ, ÄãµÃÖØзÖÇø.\n"
-"\n"
-"\n"
-"´´½¨·ÖÇø,ÏÈÑ¡ÔñÓ²ÅÌ.\n"
-"\n"
-"\n"
-"   * Çå¿Õ: ɾ³ýÓ²ÅÌÉϵÄËùÓзÖÇø.\n"
-"\n"
-"\n"
-"   * ×Ô¶¯·ÖÅä: ×Ô¶¯·ÖÅä¿ÕÏпռä.\n"
-"\n"
-"\n"
-"   * »Ö¸´·ÖÇø±í: ÓÃÓÚÔÚ·ÖÇø±íËð»µÊ±, »Ö¸´·ÖÇø±í.\n"
-"\n"
-"\n"
-"   * È¡Ïû: È¡ÏûÐÞ¸Ä.\n"
-"\n"
-"\n"
-"   * ÖضÁ·ÖÇø±í: È¡ÏûËùÓÐÐÞ¸Ä, ÖضÁ·ÖÇø±í.\n"
-"\n"
-"\n"
-"   * ¾«Áé: ×Ô¶¯·ÖÅä.\n"
-"\n"
-"\n"
-"   * ´ÓÈíÅָ̻´: ´ÓÈíÅָ̻´ÒÔÇ°±£´æµÄ·ÖÇø±í.\n"
-"\n"
-"\n"
-"   * ±£´æ·ÖÇø±íµ½ÈíÅÌ: ±£´æ·ÖÇø±í.\n"
-"\n"
-"\n"
-"   * Íê³É: ½áÊø·ÖÇø.\n"
-"\n"
-"\n"
-"          * Ctrl-c ´´½¨Ð·ÖÇø.\n"
-"\n"
-"          * Ctrl-d ɾ³ý·ÖÇø.\n"
-"\n"
-"          * Ctrl-m ÉèÖÃÔØÈëµã.\n"
-"\n"
-"\n"
-"°²×°PPCʱ, ÄãÓ¦¸Ã´´½¨ÖÁÉÙ1MµÄHFS·ÖÇøÓÃÓÚ°²×°¿ª»ú³ÌÐò yaboot."
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"·¢ÏÖÒ»¸ö»ò¶à¸öWindows·ÖÇø.\n"
-"Ñ¡ÔñÒ»¸ö·ÖÇø¸Ä±ä´óС,ÒԱ㰲װLinux.\n"
-"\n"
-"\n"
-"·ÖÇø°´ \"Linux Ãû³Æ\", \"Windows Ãû³Æ\", \"ÈÝÁ¿\"Áбí."
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "ÇëÄÍÐĵȴý. ¸Ã²Ù×÷¿ÉÄÜ»¨ºÃ¼¸·ÖÖÓ."
-
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"DrakX ÏÖÔÚÐèÒªÖªµÀÄãÑ¡Ôñ(\"½¨Òé\")°²×°»¹ÊǸü¸ß¿ØÖƵÄ(\"ר¼Ò\").\n"
-"Ñ¡Ôñ \"°²×°\" Èç¹ûÔ­À´Ã»Óа²×° Mandrake Linux\n"
-"»òÕßÄúÏ£ÍûʹÓöà¸ö²Ù×÷ϵͳ.\n"
-"\n"
-"\n"
-"Ñ¡Ôñ\"Éý¼¶\", Èç¹ûÄúÏëÉý¼¶ÒÔÇ°°æ±¾µÄ Mandrake Linux.\n"
-"\n"
-"\n"
-"Äú¿ÉÒÔ¸ù¾Ý×Ô¼º¶Ô GNU/Linux Á˽âµÄ³Ì¶È, Ñ¡ÔñÏÂÁеݲװ¼¶±ð:\n"
-"\n"
-"* ½¨Òé:Èç¹ûÄú´ÓÀ´Ã»Óа²×°¹ýÈκΠGNU/Linux ²Ù×÷ϵͳ, ¾ÍÑ¡ÔñÕâ¸ö.\n"
-"  °²×°½«×Ô¶¯½øÐÐ, ·Ç³£¼òµ¥, ÄúÖ»ÐèÒª»Ø´ðºÜÉÙµÄÎÊÌâ.\n"
-"\n"
-"\n"
-"* ר¼Ò: Èç¹ûÄú¾«Í¨ GNU/Linux, Äú¿ÉÒÔÑ¡ÔñÕâ¸ö°²×°¼¶±ð,  \n"
-"¾ÍÏóÔÚ \" ¶¨ÖÆ\"°²×°ÖÐÒ»Ñù, Äú½«¿ÉÒÔÑ¡ÔñϵͳµÄÖ÷ÒªÓÃ; \n"
-" (¹¤×÷Õ¾, ·þÎñÆ÷»ò¿ª·¢Æ½Ì¨).  Çë·Ç³£Ð¡ÐĵÄʹÓÃÕâ¸ö¼¶±ð. \n"
-"  Äú½«¿ÉÒÔ¶¨ÖÆϵͳµÄºÜ¶à·½Ãæ.  Èç¹ûÄú¶Ô GNU/Linux ûÓкÜÉîÈë\n"
-" µÄÁ˽â, Äú½«ºÜÄѻشðijЩÎÊÌâ.\n"
-" ËùÒÔ, Èç¹ûÄú²»Çå³þ»á·¢Éúʲô, Ç벻ҪѡÔñÕâ¸ö¼¶±ð."
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"ÇëÑ¡ÔñÕýÈ·µÄ¶Ë¿Ú.  ÀýÈç, \n"
-"MS Windows ÀïµÄ COM1, ÔÚ GNU/Linux ÀïÃæ½Ð×ö ttyS0."
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader µÄËõд) ºÍ Grub ÊÇ¿ª»úÆô¶¯³ÌÐò: ¿ª»úʱ, ËüÃÇ¿ÉÒÔÒýµ¼\n"
-"ÄúϵͳÀïµÄ GNU/Linux ºÍÆäËû²Ù×÷ϵͳ.  ͨ³£ËüÄÜÕýÈ·µÄ²ì¾õºÍ°²×°ÏÖÓеÄÆäËû\n"
-"²Ù×÷ϵͳ. Èç¹û²»ÊÇÕâÑù, Äú¿ÉÒÔÔÚÕâ¸ö½çÃæÊÖ¹¤Ìí¼ÓеÄÏîÄ¿. Çë×ÐϸѡÔñ\n"
-"ÕýÈ·µÄ²ÎÊý.\n"
-"\n"
-"\n"
-"Äú¿ÉÄܲ»Ï£ÍûÈÃÈËʹÓÃÕâÀïÁгöµÄÆäËû²Ù×÷ϵͳ, Ö»Òª°ÑÓйصÄÏîĿɾ³ý¾ÍºÃÁË.\n"
-"¿ÉÊÇÄúÐèÒªÏÈ×¼±¸¿ª»úÈíÅÌÀ´Òýµ¼ËüÃÇ."
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"ÇëÖ¸¶¨ÔÚÄÄÀï·ÅÖÃÆô¶¯ GNU/Linux µÄÐÅÏ¢.\n"
-"\n"
-"Ñ¡Ôñ\"Ó²Å̵ĵÚÒ»¸öÉÈÇø (MBR)\", ³ý·ÇÄúÇå³þÆäËüÑ¡ÔñµÄºó¹û."
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX ½«Òª³¢ÊÔÑ°ÕÒ IDEÉ豸ºÍ PCI SCSI ¿¨. \n"
-"Èç¹û DrakX ÕÒµ½ÁË SCSI ¿¨²¢ÇÒÖªµÀ¸ÃʹÓÃÄĸöÇý¶¯³ÌÐò\n"
-"Ëü»á×Ô¶¯°²×°.\n"
-"\n"
-"Èç¹ûÄúûÓÐ SCSI ¿¨, »òÕßÓÐÒ»¸öISA SCSI ¿¨, »òÕßÓÐÒ»¸ö\n"
-" DrakX ²»ÈÏʶµÄ PCI SCSI ¿¨, ½«Ñ¯ÎÊÄúϵͳÖÐÊÇ·ñÓÐ\n"
-"SCSI. Èç¹ûûÓÐ, ÄúÖ»ÐèÑ¡Ôñ '·ñ'. \n"
-"Èç¹ûÄú»Ø´ð 'ÊÇ' ½«ÁгöһЩ¿É¹©Ñ¡ÔñµÄÇý¶¯³ÌÐò, \n"
-"ÄúÒª´ÓÖÐÌôÑ¡ÄúµÄ¿¨¿ÉÒÔʹÓõÄÇý¶¯³ÌÐò.\n"
-"\n"
-"\n"
-"Èç¹ûÄú²»µÃ²»ÊÖ¹¤ÌôÑ¡Çý¶¯³ÌÐò, DrakX ½«ÌáÎÊl\n"
-"ÄúÊÇ·ñÒªÖ¸¶¨ÌرðµÄ²ÎÊý.  Äú×îºÃÈà DrakX ȥ̽²âÓ²¼þ\n"
-"ÒÔÈ·¶¨²ÎÊý. Õâ¸ö°ì·¨Í¨³£¿ÉÒÔ×àЧ.\n"
-"\n"
-"Èç¹û²»³É, ÄúÖ»ºÃ×Ô¼ºÌṩÇý¶¯³ÌÐò²ÎÊý.\n"
-"Çë²é¿´ 'Óû§Ö¸ÄÏ', (µÚÈýÕÂ, Collective informations on your hardware)\n"
-"ÄÇÀïÌṩÁËһЩ»ñÈ¡ÓйØÐÅÏ¢µÄ·½·¨, Èç²é¿´Ó²¼þÎĵµ,\n"
-" ä¯ÀÀÖÆÔìÉ̵ÄÍøÕ¾ (Èç¹ûÄúÓа취ÉÏÍø)\n"
-"»ò´Ó Windows ÖлñÈ¡ÓйصÄÐÅÏ¢ (Èç¹ûÄúµÄϵͳÖÐÓÐWindows)"
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr "Äã¿ÉÒÔÊäÈëYabootµÄ¸½¼ÓÐÅÏ¢."
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"YabootÊÇ NewWorld MacIntoshµÄ¿ª»úÒýµ¼ÏµÍ³, ¿ÉÒÔÒýµ¼ GNU/Linux, MacOS, ºÍ MacOSX.\n"
-"\n"
-"\n"
-"YabootÖ÷ҪѡÏî:\n"
-"\n"
-"\n"
-"  - ³õʼÐÅÏ¢: ¿ª»úÒýµ¼ÐÅÏ¢.\n"
-"\n"
-"\n"
-"  - Òýµ¼É豸: ¿ª»ú³ÌÐò°²×°µØ.\n"
-"\n"
-"\n"
-"  - ¹Ì¼þÑÓ³Ù: yabootµÄ¿ª»úÑÓ³ÙÖ®Ò».\n"
-"\n"
-"\n"
-"  - ºËÐÄÒýµ¼ÑÓ³Ù: ºËÐÄÒýµ¼ÑÓ³Ù.\n"
-"\n"
-"\n"
-"  - ʹÄÜCDÒýµ¼?: 'C' CDÒýµ¼.\n"
-"  - ʹÄÜOFÒýµ¼?: 'N' ¹Ì¼þÒýµ¼.\n"
-"  - È´Ê¡²Ù×÷ϵͳ: ¹Ì¼þÈ´Ê¡Òýµ¼µÄ²Ù×÷ϵͳ."
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"Ñ¡ÔñÓ²ÅÌÄú×¼±¸Çå¿ÕÀ´°²×° Mandrake·ÖÇø.\n"
-"×¢Ò⣬ËùÓÐÊý¾Ý½«¶ªÊ§²¢ÇÒÎÞ·¨»Ö¸´."
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"µã»÷ \"È·¶¨\"ɾ³ý¸ÃÓ²ÅÌËùÓÐÊý¾Ý¼°·ÖÇø.\n"
-"×¢Ò⣬µã»÷ \"È·¶¨\"ºó£¬Äú½«ÎÞ·¨»Ö¸´Êý¾Ý¼°·ÖÇø(°üÀ¨WindowsÊý¾Ý).\n"
-"\n"
-"\n"
-"µã»÷ \"È¡Ïû\"È¡Ïû²Ù×÷£¬Êý¾Ý¼°·ÖÇø²»»á¶ªÊ§."
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid "Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr "ÎÞ·¨·ÃÎÊÏàÓ¦ºËÐĵĺËÐÄÄ£¿é(ÕÒ²»µ½ %sÎļþ)"
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-""
-msgstr ""
-"ÄúÑ¡ÔñÁËÒÔÏ·þÎñ³ÌÐò: %s\n"
-"\n"
-"\n"
-"ÕâЩ·þÎñÈ´Ê¡»á±»¼¤»î¡£ËüÃÇûÓÐÒÑÖªµÄ°²È«ÎÊÌ⣬µ«¿ÉÄÜ»áз¢ÏÖ¡£\n"
-"Èç¹û·¢ÏÖ£¬ÄãµÃÁ¢¼´Éý¼¶.\n"
-"\n"
-"\n"
-"¹ûÕæ°²×°ÕâЩ·þÎñ?\n"
-""
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "ûÓÐNISÓò£¬ ÎÞ·¨Ê¹Óù㲥"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Çë²åÈëÒ»ÕÅDOSÈíÅ̵½Çý¶¯Æ÷ %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "²»ÊÇDOS¸ñʽµÄÈíÅÌ"
-
-#: ../../install_any.pm_.c:809
-msgid "To use this saved packages selection, boot installation with ``linux defcfg=floppy''"
-msgstr "ʹÓñ£´æµÄÈí¼þ°üÑ¡Ôñ, ÒÔ''linux defcfg=floppy''Æô¶¯"
-
-#: ../../install_any.pm_.c:831
-#: ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "ÇëÈ¡Îļþ %s ³ö´í "
-
-#: ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107
-#: ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716
-#: ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "È·¶¨"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"ÄúϵͳÖеIJ¿·ÖÓ²¼þÐèÒª 'רÓÐ' µÄÇý¶¯³ÌÐò²ÅÄܹ¤×÷. \n"
-"ÓйØËüÃǵÄÇé¿ö, ÇëÄú²é¿´: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"±ØÐëÖ¸¶¨Ò»¸ö¸ù·ÖÇø.\n"
-"ÇëÏÈ´´½¨Ò»¸ö Linux ·ÖÇø (»òÔÚͼÖеã»÷ÏÖÓеÄÒ»¸ö).\n"
-"È»ºóÔÚÁбíÀïÑ¡Ôñ \"×°Ôصã\", ÉèΪ '/'."
-
-#: ../../install_interactive.pm_.c:49
-#: ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "Äú±ØÐëÓÐÒ»¸ö½»»»·ÖÇø"
-
-#: ../../install_interactive.pm_.c:50
-#: ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Äú»¹Ã»Óн»»»·ÖÇø\n"
-"\n"
-"Òª¼ÌÐøÂð?"
-
-#: ../../install_interactive.pm_.c:53
-#: ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Äú±ØÐëÓÐÒ»¸öFAT·ÖÇø ÔØÈë /boot/efi"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "ʹÓÿÕÏпռä"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "ûÓÐ×ã¹»¿ÕÏпռä·ÖÅä¸øзÖÇø"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "ʹÓÃÏÖ´æµÄ·ÖÇø"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "ÏÖ´æµÄ·ÖÇøÎÞ·¨Ê¹ÓÃ"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "ÀûÓà Windows ·ÖÇø½øÐлØËÍ"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "ÇëÎÊÄúÒªÔÚÄÄÒ»¸ö·ÖÇøÀï·Å Linux4Win?"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "Ñ¡Ôñ´óС"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "¸ù·ÖÇø´óС(MB): "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "¶Ô»»·ÖÇø´óС (MB): "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "ʹÓÃÔÚ Windows ·ÖÇøÉϵĿÕÏпռä"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "ÄúÐèÒª¸Ä±äÄĸö·ÖÇøµÄ´óС?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "¼ÆËã Windows ÎļþϵͳµÄ±ß½ç"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"¸Ä±ä FAT ·ÖÇø´óСµÄ³ÌÐòÎÞ·¨´¦ÀíÕâ¸ö·ÖÇø, \n"
-"·¢ÉúÁËÈçÏ´íÎó: %s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "ÄúµÄ Windows ·ÖÇøÓÐÌ«¶àËéƬ, ÇëÏÈÔËÐÐ ``defrag''"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"¾¯¸æ!\n"
-"\n"
-"DrakX ÏÖÔÚÒªµ÷ÕûÄúµÄ Windows ·ÖÇøµÄ´óС. ΪÁË°²È«, ÄúÓ¦¸ÃÏÈÔÚ Windows ÏÂÔË\n"
-"ÐÐ scandisk, ²¢¸ù¾ÝÐèÒªÔËÐÐ defreg. ÏÖÔÚÄú¿ÉÒÔÍ˳ö Linux °²×°È¥×öÕâЩ\n"
-"×¼±¸, È»ºóÖØпªÊ¼°²×°.\n"
-"Ò»ÇоÍÐ÷ºó, Çë°´ \"È·¶¨\"."
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "Äú½«±£Áô¶àÉÙ¿Õ¼ä¸ø windows?"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "·ÖÇø %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "×Ô¶¯µ÷Õû´óСʧ°Ü: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid "There is no FAT partitions to resize or to use as loopback (or not enough space left)"
-msgstr "ûÓпÉÒÔµ÷Õû´óС»òÕßÓÃ×÷»Ø»·µÄ FAT ·ÖÇø (»òÕßûÓÐ×㹻ʣÓà¿Õ¼ä)"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "Çå³ýÕû¸ö´ÅÅÌ"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "ɾ³ý Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "ÄúÓв»Ö»Ò»¸öÓ²ÅÌ, ÄúÒªÔÚÄĸöÉÏÃæ°²×° Linux?"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "´ÅÅÌ %s ÉÏÏÖ´æµÄËùÓзÖÇø¼°Æä×ÊÁϽ«±»Çå³ý"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "¶¨ÖÆ·ÖÇø"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "ʹÓà fdisk"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"ÄúÏÖÔÚ¿ÉÒÔÔÚ %s ÉÏ×ö·ÖÇø\n"
-"×öÍêÖ®ºó, ²»ÒªÍü¼ÇÓà `w' ÃüÁî±£´æÄúµÄÐÞ¸Ä"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "ÔÚ Windows ·ÖÇøÉÏûÓÐ×ã¹»µÄ¿ÕÏпռä"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "ÎÒÎÞ·¨ÕÒµ½°²×°ÐèÒªµÄ¿Õ¼ä"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX ·ÖÇø´óʦ½¨ÒéÕâЩ½â¾ö°ì·¨:"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "·ÖÇøʧ°Ü: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "ÍøÂçÕýÔÚÆô¶¯"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "ÕýÔÚͣסÍøÂ繦ÄÜ"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"·¢Éú´íÎó, ¿ÉÊÇÎÒ²»ÖªµÀ¸ÃÔõÑù´¦Àí²ÅºÃ.\n"
-"¼ÌÐøÏÂÈ¥»áÔõÑù¾Í¿´ÄúµÄÔËÆøÁË."
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Öظ´µÄ×°Ôصã %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-""
-msgstr ""
-"һЩÖØÒªÈí¼þ°üûÓÐÕýÈ·µÄ°²×°. ÄúµÄ¹âÅÌ»òÕßÇý¶¯Æ÷¿ÉÄÜÓÐȱÏÝ.\n"
-"ÇëÔÚһ̨°²×°ºÃµÄµçÄÔÉϼì²é¹âÅÌ, ÃüÁîÊÇ\n"
-"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-""
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "»¶Ó­À´µ½ %s"
-
-#: ../../install_steps.pm_.c:506
-#: ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "ûÓпÉÓõÄÈíÅÌÇý¶¯Æ÷."
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid ""
-"Entering step `%s'\n"
-""
-msgstr ""
-"½øÈë²½Öè `%s'\n"
-""
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "Òª°²×°Èí¼þ°üµÄ¿Õ¼ä"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "×ܹ²´óС:"
-
-#: ../../install_steps_graphical.pm_.c:346
-#: ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid ""
-"Version: %s\n"
-""
-msgstr ""
-"°æ±¾: %s\n"
-""
-
-#: ../../install_steps_graphical.pm_.c:347
-#: ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid ""
-"Size: %d KB\n"
-""
-msgstr ""
-"´óС: %d KB\n"
-""
-
-#: ../../install_steps_graphical.pm_.c:462
-#: ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "Ñ¡ÔñÄúÒª°²×°µÄÈí¼þ°ü"
-
-#: ../../install_steps_graphical.pm_.c:465
-#: ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "ÐÅÏ¢"
-
-#: ../../install_steps_graphical.pm_.c:473
-#: ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "°²×°"
-
-#: ../../install_steps_graphical.pm_.c:492
-#: ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "ÕýÔÚ°²×°"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "ÇëÉÔºò, "
-
-#: ../../install_steps_graphical.pm_.c:501
-#: ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "Ê£Óàʱ¼ä"
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "×ܹ²Ê±¼ä"
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "ÕýÔÚ×¼±¸°²×°"
-
-#: ../../install_steps_graphical.pm_.c:528
-#: ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "ÕýÔÚ°²×°³ÌÐò %s"
-
-#: ../../install_steps_graphical.pm_.c:553
-#: ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "ÕæµÄÒª¼ÌÐø"
-
-#: ../../install_steps_graphical.pm_.c:553
-#: ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "ÅÅÐòÈí¼þ°üʱÓдíÎó"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "¶Ô X11 ʹÓÃÏÖÓеÄÅäÖÃ?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"ÄúµÄϵͳ×ÊÔ´²»×ã.  ÄúÔÚ°²×° Mandrake Linux ʱ¿ÉÄÜÓöµ½ÎÊÌâ.\n"
-"Èç¹ûÕâÑù, Äú¿ÉÒÔ³¢ÊÔÎı¾Ä£Ê½µÄ°²×°. \n"
-"ÔÚ´Ó¹âÅÌÆô¶¯µÄʱºò°´×¡ 'F1' ¼ü, È»ºóÊäÈë 'text'."
-
-#: ../../install_steps_gtk.pm_.c:159
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "°²×°Àà±ð"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "Çë´ÓÏÂÁа²×°Àà±ðÀïÑ¡ÔñÒ»¸ö:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-""
-msgstr ""
-"ÄúÑ¡ÔñµÄÕâЩ×é×ܹ²µÄ´óСԼÊÇ %d MB.\n"
-""
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Èç¹ûÄúÏëʹÓøüÉٵĿռäÀ´°²×°, \n"
-"Çë¾ö¶¨°²×°ÒѾ­Ñ¡¶¨µÄÈí¼þ°üµÄ°Ù·Ö±È?\n"
-"\n"
-"Ñ¡Ôñ½ÏµÍµÄ°Ù·Ö±È¾ÍÖ»°²×°×îÖØÒªµÄÈí¼þ; Ñ¡Ôñ 100 %% ¾Í°²×°ËùÑ¡µÄ\n"
-"È«²¿Èí¼þ."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"ÄúµÄ´ÅÅÌ¿Õ¼äÖ»¹»°²×°ËùÓÐÕâЩÈí¼þ°üµÄ %d%%.\n"
-"Èç¹ûÄúÏëÉÙ°²×°Ò»Ð©, \n"
-"Çë¾ö¶¨°²×°ÒѾ­Ñ¡¶¨µÄÈí¼þ°üµÄ°Ù·ÖÖ®¼¸?\n"
-"\n"
-"Ñ¡Ôñ½ÏµÍµÄ°Ù·Ö±È¾ÍÖ»°²×°×îÖØÒªµÄÈí¼þ; Ñ¡Ôñ %d%% ¾Í°²×°ËùÑ¡µÄ\n"
-"È«²¿Èí¼þ."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "ÔÚÏÂÒ»¸ö²½ÖèÄú½«¿ÉÒÔ¸ü×ÐϸµÄÑ¡Ôñ"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Òª°²×°Èí¼þ°üµÄ°Ù·Ö±È"
-
-#: ../../install_steps_gtk.pm_.c:291
-#: ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "³ÌÐò×éÑ¡Ôñ"
-
-#: ../../install_steps_gtk.pm_.c:320
-#: ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "Ñ¡Ôñµ¥¸öÈí¼þ°ü"
-
-#: ../../install_steps_gtk.pm_.c:343
-#: ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "×ܹ²´óС:  %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "ÓдíµÄÈí¼þ°ü"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid ""
-"Name: %s\n"
-""
-msgstr ""
-"Ãû³Æ: %s\n"
-""
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid ""
-"Importance: %s\n"
-""
-msgstr ""
-"ÖØÒªÐÔ: %s\n"
-""
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid "You can't select this package as there is not enough space left to install it"
-msgstr "Äú²»¿ÉÒÔÑ¡ÔñÕâ¸öÈí¼þ°ü. ûÓÐ×ã¹»¿Õ¼ä°²×°Ëü."
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "ÏÂÁÐÈí¼þ°ü½«Òª±»°²×°"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "ÏÂÁÐÈí¼þ°ü½«Òª±»²ð³ý"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "Äú²»ÄܸıäÕâ¸öÈí¼þ°üµÄÑ¡¶¨"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Õâ¸öÈí¼þ°üÊDZØÐèµÄ, ²»ÄÜÈ¡ÏûÑ¡¶¨"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "Äú²»¿ÉÒÔÈ¡ÏûÑ¡ÔñÕâ¸öÈí¼þ°ü. ËüÒѾ­°²×°¹ýÁË."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Õâ¸öÈí¼þ°ü±ØÐë½øÐÐÉý¼¶.\n"
-"ÄúÕæµÄҪɾ³ýËüÂð?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Äú²»Äܲ»Ñ¡ÔñÕâ¸öÈí¼þ°ü, Ëü±ØÐëÉý¼¶"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "ÏÔʾ×Ô¶¯Ñ¡ÖеÄÈí¼þ°ü"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "ÈíÅÌÔØÈë/±£´æ"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "¸üÐÂÈí¼þ°üÑ¡Ôñ"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "×îС°²×°"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "ÕýÔÚ¹À¼Æ"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "ÕýÔÚ×¼±¸°²×°"
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d Èí¼þ°ü"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-""
-msgstr ""
-"\n"
-"¾¯¸æ\n"
-"\n"
-"Çë×ÐϸÔĶÁÏÂÁеÄÌõ¿î. Èç¹ûÄú²»Í¬ÒâÆäÖÐÈκβ¿·Ö, Äú¾Í²»¿ÉÒÔ°²×°ÏÂÒ»¸ö\n"
-"¹âÅÌÉϵÄÈí¼þ. Ñ¡Ôñ '¾Ü¾ø' \n"
-"½«¼ÌÐø°²×°ÆäËû½éÖÊÉϵÄÈí¼þ.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-""
-
-#: ../../install_steps_gtk.pm_.c:627
-#: ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "½ÓÊÜ"
-
-#: ../../install_steps_gtk.pm_.c:627
-#: ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "¾Ü¾ø"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Çë»»ÁíһƬ¹âÅÌ!\n"
-"\n"
-"ÇëÔÚÇý¶¯Æ÷ÖвåÈë±êÓÐ \"%s\" µÄ¹âÅÌ, È»ºóµã»÷ 'È·¶¨'.\n"
-"Èç¹ûÄúûÓÐÕâÕŹâÅÌ, Çëµã»÷ 'È¡Ïû', ·ÅÆú°²×°Õâ¸ö¹âÅÌÉϵÄÈí¼þ."
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "°²×°Èí¼þ°üʱÓдíÎó:"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "·¢ÉúÒ»¸ö´íÎó"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "Ðí¿ÉЭÒé"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this License. \n"
-"If you disagree with any portion of the License, you are not allowed to install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner which does not comply \n"
-"with the terms and conditions of this License is void and will terminate your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever (including without \n"
-"limitation damages for loss of business, interruption of business, financial loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential loss) arising out \n"
-"of the possession and use of software components or arising out of  downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please read carefully the terms \n"
-"and conditions of the license agreement for each component before using any component. Any question \n"
-"on a component license should be addressed to the component author and not to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of France.\n"
-"All disputes on the terms of this license will preferably be settled out of court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-""
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this License. \n"
-"If you disagree with any portion of the License, you are not allowed to install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner which does not comply \n"
-"with the terms and conditions of this License is void and will terminate your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever (including without \n"
-"limitation damages for loss of business, interruption of business, financial loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential loss) arising out \n"
-"of the possession and use of software components or arising out of  downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please read carefully the terms \n"
-"and conditions of the license agreement for each component before using any component. Any question \n"
-"on a component license should be addressed to the component author and not to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of France.\n"
-"All disputes on the terms of this license will preferably be settled out of court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-""
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "¼üÅÌ"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "ÇëÑ¡ÔñÄúʹÓõļüÅ̲¼¾Ö."
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "¼üÅÌÇåµ¥"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "ÄúÏëÒª×öʲôÀà±ðµÄ°²×°?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "°²×°/Éý¼¶"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "Òª°²×°ÐÂϵͳ»¹ÊÇÉý¼¶Ô­ÓÐϵͳ?"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "ÍƼö"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "ר¼Ò"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "Éý¼¶"
-
-#: ../../install_steps_interactive.pm_.c:224
-#: ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "ÇëÑ¡ÔñÄúµÄÊó±êÊÇÄÇÒ»ÖÖÀàÐÍ."
-
-#: ../../install_steps_interactive.pm_.c:230
-#: ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "Êó±ê¶Ë¿Ú"
-
-#: ../../install_steps_interactive.pm_.c:231
-#: ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "ÇëÑ¡ÔñÄúµÄÊó±êÊÇÁ¬½Óµ½ÄǸö´®ÐÐ¿Ú ?"
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "Êó±ê¼üÄ£Äâ"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "2¼üÄ£Äâ"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "3¼üÄ£Äâ"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "ÅäÖà PCMCIA ¿¨"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "ÕýÔÚÅäÖÃ IDE"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "ûÓпÉÓõÄÓ²ÅÌ·ÖÇø"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "ÕýÔÚɨÃè¸÷¸ö·ÖÇøÒÔÑ°ÕÒ×°Ôصã"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "Ñ¡Ôñ×°Ôصã"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-""
-msgstr ""
-"ÎÒÎÞ·¨¶ÁÈ¡ÄúµÄ·ÖÇø±í, Õâ¸ö·ÖÇø±íÆÆ»µµÃÌ«ÑÏÖØÁË :(\n"
-"ÎÒ¿ÉÒÔ³¢ÊÔÇå³ý»µ·ÖÇø (ËùÓеÄÊý¾Ý½«±»Çå³ý!)\n"
-"ÁíÍâÒ»¸ö½â¾ö°ì·¨ÊǽûÖ¹ DrakX Ð޸ķÖÇø±í.\n"
-"(´íÎóÊÇ %s)\n"
-"\n"
-"ÄúͬÒâÇå³ýËùÓзÖÇøÂð?\n"
-""
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ÎÞ·¨ÕýÈ·¶Á³ö·ÖÇø±íµÄÄÚÈÝ.\n"
-"¼ÌÐøÏÂÈ¥»áÔõÑù¾Í¿´ÄúµÄÔËÆøÁË!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid "No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr "ûÓпª»úÆô¶¯ÐèÒª1MµÄ¿Õ¼ä!°²×°½«¼ÌÐø, µ«ÈçÐèÆô¶¯ÏµÍ³, ÄãµÃÓÃDiskDrake´´½¨Æô¶¯·ÖÇø"
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "Éý¼¶Ã»ÓÐÕÒµ½ ¸ù ·ÖÇø"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "¸ù·ÖÇø"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "ÄúµÄ¸ù·ÖÇø(/)ÊÇÄÄÒ»¸ö ?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Äú½«ÐèÒªÖØÐÂÆô¶¯Ê¹¸Ä±äÉúЧ"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "ÇëÑ¡ÔñÄúÒª¸ñʽ»¯µÄ·ÖÇø"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "ÊÇ·ñ¼ì²é»µ´Å¿é?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "ÕýÔÚ¸ñʽ»¯¸÷¸ö·ÖÇø"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "ÕýÔÚ´´½¨ºÍ¸ñʽ»¯Îļþ %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "½»»»ÇøÌ«ÉÙ, ÎÞ·¨Íê³É°²×°, ÇëÔö¼Ó½»»»·ÖÇø."
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "Ñ°ÕÒ¿É°²×°µÄ³ÌÐò"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "Ñ°ÕÒ¿ÉÉý¼¶µÄ³ÌÐò"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid "Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "ÄúµÄϵͳËùÊ£ÓàµÄ¿Õ¼ä²»¹»½øÐа²×°»òÉý¼¶ (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Íê³É (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "×îÉÙ (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "½¨Òé (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "¶¨ÖÆ"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"ÇëÔÚÈíÅÌÔØÈë»ò±£´æÈí¼þ°üÑ¡ÔñÐÅÏ¢.\n"
-"¸ñʽÓëauto_installÉú³ÉµÄÈíÅÌÒ»Ñù"
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "´ÓÈíÅÌÔØÈë"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "Õý´ÓÈíÅÌÔØÈë"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "Èí¼þ°üÑ¡Ôñ"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "Çë²åÈëÈí¼þ°üÑ¡ÔñÈíÅÌ"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "±£´æÈëÈíÅÌ"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "ËùÑ¡³¬¹ý¿ÉÓÿռä"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Èç¹ûÄúÓµÓÐÏÂÁÐËùÓеĹâÅÌ, µã»÷ È·ÈÏ.\n"
-"Èç¹ûÄúûÓÐÈκÎÒ»ÕÅ, µã»÷ È¡Ïû.\n"
-"Èç¹ûÄúֻȱÆäÖÐһЩ, ²»Ñ¡ÖÐËü, È»ºóµã»÷ È·ÈÏ."
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "±êºÅ %s µÄCD-ROM "
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"ÕýÔÚ°²×°Èí¼þ°ü %s \n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "°²×°ºóµÄÅäÖÃ"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Çë²åÈëÒ»ÕÅÆô¶¯ÈíÅ̵½Çý¶¯Æ÷ %s"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "ÇëÔÚÇý¶¯Æ÷ %s ÖвåÈëÒ»ÕŸüÐÂÄ£¿éÈíÅÌ"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and imposed\n"
-"by various jurisdictions, customer and/or end user of theses software should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"ÏÖÔÚÄúÒª¾ö¶¨ÊÇ·ñÏÂÔØÓÃÓÚ¼ÓÃܵÄÈí¼þ°ü.\n"
-"\n"
-"¾¯¸æ!\n"
-"\n"
-"ÔÚ²»Í¬µÄ·¨ÂÉÖƶÈÖÐ, ÊÊÓÃÓÚÕâЩÈí¼þµÄÒ»°ãÒªÇóºÍÇ¿ÖƽûÁîÓкܴó²»Í¬. \n"
-"¿Í»§ºÍ/»ò×îÖÕÓû§±ØÐëÇå³þµÄÁ˽âËùÔÚ¹ú¼ÒµÄ·¨ÂÉÊÇ·ñÔÊÐí×Ô¼ºÏÂÔØ, ±£´æ, ºÍ/»ò\n"
-"ʹÓÃÕâЩÈí¼þ.\n"
-"\n"
-"ÁíÍâ, ¿Í»§ºÍ/»ò×îÖÕÓû§±ØÐëÇå³þ, ²»µÃÎ¥·´ËùÔÚ¹ú¼ÒµÄ·¨ÂÉ. Î¥·´ÓйØÊÊÓ÷¨ÂɽûÁî\n"
-"µÄºó¹û, ¿ÉÄÜÊÇÊܵ½ÑÏÀ÷µÄ³Í·£.\n"
-"\n"
-"¿Í»§ºÍ/»ò×îÖÕÓû§ÔÚͬÒâÇ©ÊðÏÂÁÐЭÒéÖ®ºó, ²»ÂÛºÎÖÖÇé¿ö, Mandrakesoft, ÒÔ¼°Æä\n"
-"ÖÆÔìÉ̺;­ÏúÉÌ, ²»³Ðµ£ÈκÎÔðÈÎ, ¼´Ê¹¿Í»§ºÍ/»ò×îÖÕÓû§ÒòÏÂÔØ, ÓµÓкÍ/»òʹÓÃ\n"
-"ÕâЩÈí¼þ¶øÔâÊÜÈκÎÌض¨µÄ, ¼ä½ÓµÄ»ò¸½´øµÄË𺦠(°üÀ¨, µ«²»ÏÞÓÚÀûÈóµÄËðʧ, ÉúÒâ\n"
-"µÄÖжÏ, ¹Ø¼üÊý¾ÝµÄ¶ªÊ§¼°ÆäËû²ÆÎïËðʧ, ºÍ¿ÉÄÜÓÉ·¨ÔºÅоö²úÉúµÄÕ®ÎñºÍÅâ³¥).\n"
-"\n"
-"\n"
-"¶ÔÓÚÏÂÁÐЭÒéµÄÈκÎÒÉÎÊ, ÇëÁªÏµ\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "Ñ¡ÔñÒ»¸ö¾µÏóÍøÕ¾À´È¡µÃ³ÌÐò"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Á¬½Ó¾µÏóÍøÕ¾ÒÔÈ¡µÃ¿É¹©°²×°³ÌÐòµÄÁбí"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "ÇëÑ¡ÔñÄúÒª°²×°µÄÈí¼þ°ü"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "ÄúÔÚʱÇøÊÇÄĸö?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "ÄúµÄϵͳʱÖÓÉ趨Ϊ GMT"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "×Ô¶¯Ê±¼äͬ²½(ʹÓÃNTP)"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "NTP ·þÎñÆ÷"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863
-#: ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "Ô¶³Ì CUPS ·þÎñÆ÷"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "ûÓдòÓ¡»ú"
-
-#: ../../install_steps_interactive.pm_.c:867
-#: ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "¸ÅÒª"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "Êó±ê"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "ʱÇø"
-
-#: ../../install_steps_interactive.pm_.c:873
-#: ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "´òÓ¡»ú"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ÄÚÖà ISDN ¿¨"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "Éù¿¨"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "TV ¿¨"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "ʹÓÃNIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "±¾»úÎļþ"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929
-#: ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "É趨 root ¿ÚÁî"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "ûÓпÚÁî"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Õâ¸ö¿ÚÁîÌ«¼òµ¥ÁË (ÖÁÉÙÒªÓÐ %d ¸ö×Ö·û)"
-
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "ÊÚȨ"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "LDAP ʶ±ð"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP »ù±¾Ä¿Â¼Ãû dn"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "LDAP ·þÎñÆ÷"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "NISʶ±ð"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS ÍøÓò"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS ·þÎñÆ÷"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to install\n"
-"SILO on your system, or another operating system removes SILO, or SILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used with\n"
-"the Mandrake rescue image, making it much easier to recover from severe system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"¶¨ÖƵĿª»úÈíÅÌÈÃÄúÄܲ»ÒÀÀµ³£¹æµÄ¿ª»úÒýµ¼³ÌÐò¶øÖ±½ÓÆô¶¯ÄúµÄ Linux ϵͳ.\n"
-"Èç¹ûÄú²»Ïë°²×° SILO, »òÕßÆäËû²Ù×÷ϵͳ°Ñ SILO ɾ³ýÁË, »òÕß\n"
-" SILO ÔÚÄúµÄÓ²¼þÉϲ»Äܹ¤×÷, ÄÇôÕâ¾ÍºÜÓÐÓô¦ÁË. \n"
-"¿ª»úÈíÅÌ»¹¿ÉÒÔºÍ Mandrake ÐÞ¸´ÅÌÅäºÏʹÓÃ, °ïÖúÄú¸üÇáËɵĻָ´ÑÏÖعÊÕϵÄϵͳ.\n"
-"ÏÖÔھ͸øÄúµÄϵͳ×öÒ»ÕÅ¿ª»úÈíÅÌ, ºÃÂð? \n"
-"ÔÚµÚÒ»¸öÈíÅÌÇý¶¯Æ÷Àï·ÅһƬÈíÅÌ, È»ºó°´\"È·¶¨\""
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "µÚÒ»¸öÈíÅÌÇý¶¯Æ÷"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "µÚ¶þ¸öÈíÅÌÇý¶¯Æ÷"
-
-#: ../../install_steps_interactive.pm_.c:1012
-#: ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "ÂÔ¹ý"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used with\n"
-"the Mandrake rescue image, making it much easier to recover from severe system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"¶¨ÖƵĿª»úÈíÅÌÈÃÄúÄܲ»ÒÀÀµ³£¹æµÄ¿ª»úÒýµ¼³ÌÐò¶øÖ±½ÓÆô¶¯ÄúµÄ Linux ϵͳ.\n"
-"Èç¹ûÄú²»Ïë°²×° LILO (»ò grub), »òÕßÆäËû²Ù×÷ϵͳ°Ñ LILO ɾ³ýÁË, »òÕß\n"
-" LILO ÔÚÄúµÄÓ²¼þÉϲ»Äܹ¤×÷, ÄÇôÕâ¾ÍºÜÓÐÓô¦ÁË. \n"
-"¿ª»úÈíÅÌ»¹¿ÉÒÔºÍ Mandrake ÐÞ¸´ÅÌÅäºÏʹÓÃ, °ïÖúÄú¸üÇáËɵĻָ´ÑÏÖعÊÕϵÄϵͳ.\n"
-"ÏÖÔھ͸øÄúµÄϵͳ×öÒ»ÕÅ¿ª»úÈíÅÌ, ºÃÂð?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "±§Ç¸£¬Ã»ÓпÉÓõÄÈíÅÌ»ú"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Ñ¡ÔñÄúÒªÖÆ×÷¿ª»úÈíÅ̵ÄÈíÅÌ»ú"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "Çë²åÈëÒ»ÕÅÈíÅ̵½Çý¶¯Æ÷ %s"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "ÕýÔÚÖÆ×÷¿ª»úÈíÅÌ"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "×¼±¸¿ª»úÒýµ¼³ÌÐò"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"ÄãºÃÏñÓõÄÊǸöÀϵôÑÀ»ò²»ÈÏʶµÄ»úÆ÷,\n"
-"yabootÎÞ·¨¿ª»úÆô¶¯.\n"
-"°²×°¼ÌÐø, ÄãµÃʹÓÃBootXÆô¶¯"
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "ÄúҪʹÓà aboot Âð?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"°²×° aboot ʱ³ö´í, \n"
-"Ç¿ÆÈ°²×°»á»Ù»µµÚÒ»¸ö·ÖÇø, Òª¼ÌÐøÂð?"
-
-#: ../../install_steps_interactive.pm_.c:1070
-msgid "Installing bootloader"
-msgstr "°²×°Òýµ¼³ÌÐò"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "°²×°ÏµÍ³Òýµ¼³ÌÐòʧ°Ü£¬³öÏÖÏÂÁдíÎó:"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Äã¿ÉÄܵøıä¹Ì¼þÒýµ¼É豸À´Ê¹ÄÜ¿ª»úÒýµ¼³ÌÐò.\n"
-"Èç¹û¿ª»úʱûÓÐÒýµ¼³ÌÐòÌáʾ, °´Command-Option-O-FÈ»ºóÊäÈë:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" È»ºóÊäÈë: shut-down\n"
-"Ä㽫ÔÚÏ´οª»úʱ¿´µ½Òýµ¼³ÌÐòÌáʾ."
-
-#: ../../install_steps_interactive.pm_.c:1092
-#: ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "µÍ"
-
-#: ../../install_steps_interactive.pm_.c:1093
-#: ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "ÖÐ"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "¸ß"
-
-#: ../../install_steps_interactive.pm_.c:1098
-#: ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "Ñ¡Ôñ°²È«¼¶±ð"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "ÇëÔÚÇý¶¯Æ÷ %s ÖвåÈëÒ»ÕÅ¿Õ°×ÈíÅÌ"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "ÕýÔÚ´´½¨×Ô¶¯°²×°ÈíÅÌ"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"ijЩ²½ÖèûÓÐÍê³É.\n"
-"\n"
-"ÄúÈ·ÐÅÒªÏÖÔÚÍ˳öÂð?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"¹§Ï². °²×°Íê³ÉÁË.\n"
-"È¡³ö¿ª»úµÄ¹âÅÌ»òÈíÅÌ, È»ºó°´ ENTER, ÖØÐÂÆô¶¯ÄúµÄϵͳ.\n"
-"\n"
-"ÒªÁ˽â Mandrake Linux µÄÐ޸ĺ͸üÐÂ,\n"
-"Çë·ÃÎÊÎÒÃǵÄÍøÕ¾  http://www.mandrakelinux.com/.\n"
-"\n"
-"¹ØÓÚÈçºÎÅäÖÃÄúµÄϵͳ, Çë²é¿´ Mandrake Linux Óû§ÊÖ²á."
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "ÕýÔÚ´´½¨×Ô¶¯°²×°ÈíÅÌ"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-""
-msgstr ""
-"×Ô¶¯°²×°ÄÜÈ«×Ô¶¯´¦ÀíÓ²ÅÌ°²×°, Äã¿ÉÄÜÔ¸ÒâÖØÏÖ°²×°.\n"
-""
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "×Ô¶¯"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "ÖØÏÖ"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "±£´æÈí¼þ°üÑ¡Ôñ"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux °²×° %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid "  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr "  <Tab>/<Alt-Tab> ÔÚÏîÄ¿¼äÒƶ¯  |  <Space> Ñ¡Ôñ  |  <F12> ϸö»­Ãæ  "
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "ȱÉÙkdesu"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "Ñ¡ÔñÎļþ"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "¸ß¼¶"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "ÇëÉÔºò"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "Õ¹¿ª·ÖÀàÊ÷"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "ÊÕËõ·ÖÀàÊ÷"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "Çл»Æ½ÆÌ»ò·Ö×éÅÅÁÐ"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid ""
-"Ambiguity (%s), be more precise\n"
-""
-msgstr ""
-"ÎÒ²»Ã÷°×ÄúµÄÒâ˼ (%s) £¬Çë¸üÃ÷È·µÄÖ¸¶¨\n"
-""
-
-#: ../../interactive_stdio.pm_.c:36
-#: ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid ""
-"Bad choice, try again\n"
-""
-msgstr ""
-"´íÎóµÄÑ¡Ôñ£¬ÇëÖØÊÔ\n"
-""
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr "? (ȱʡ %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "ÄúµÄÑ¡Ôñ ? (ȱʡ %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "ÄúµÄÑ¡Ôñ ? (ȱʡ %s  Èç¹ûûÓÐ ÊäÈë `none') "
-
-#: ../../keyboard.pm_.c:140
-#: ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "½Ý¿Ë (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141
-#: ../../keyboard.pm_.c:155
-#: ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "µÂ¹ú"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143
-#: ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "Î÷°àÑÀ"
-
-#: ../../keyboard.pm_.c:144
-#: ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "·ÒÀ¼"
-
-#: ../../keyboard.pm_.c:145
-#: ../../keyboard.pm_.c:156
-#: ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "·¨¹ú"
-
-#: ../../keyboard.pm_.c:146
-#: ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "ŲÍþ"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "²¨À¼"
-
-#: ../../keyboard.pm_.c:148
-#: ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "¶í¹ú"
-
-#: ../../keyboard.pm_.c:150
-#: ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "ÈðµäÓï"
-
-#: ../../keyboard.pm_.c:151
-#: ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "Ó¢¹ú"
-
-#: ../../keyboard.pm_.c:152
-#: ../../keyboard.pm_.c:157
-#: ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "ÃÀ¹ú¼üÅÌ"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "°¢¶û°ÍÄáÑÇ"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "ÃÀ¹ú (¾É)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "ÃÀ¹ú (´ò×Ö)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "ÃÀ¹ú (Òô±ê)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latin)"
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "±ÈÀûʱ"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "±£¼ÓÀûÑÇ"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "°ÍÎ÷ (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "°×¶íÂÞ˹"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "ÈðÊ¿ (µÂÓï²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "ÈðÊ¿ (·¨Óï²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "½Ý¿Ë (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "µÂ¹ú (ûÓÐdead keys)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "µ¤Âó"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegian)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "°£Ë¹ÍÐÄáÑÇ"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "¸ñ³¼ªÑÇ(\"¶íÓï\"²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "¸ñ³¼ªÑÇ(\"À­¶¡\" ²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "Ï£À°"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "ÐÙÑÀÀû"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "¿ËÂÞµØÑÇ"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "ÒÔÉ«ÁÐ"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "ÒÔÉ«ÁÐ (Òô±ê)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "ÒÁÀÊ"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "±ùµº"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "Òâ´óÀû"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "ÈÕÎÄ106¼üÅÌ"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "º«¹ú¼üÅÌ"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "À­ÃÀ¼üÅÌ"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "Á¢ÌÕÍð AZERTY (ÀÏʽ)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "Á¢ÌÕÍð AZERTY (ÐÂʽ)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Á¢ÌÕÍð \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Á¢ÌÕÍð \"phonetic\" QWERTY"
-
-#: ../../keyboard.pm_.c:208
-msgid "Latvian"
-msgstr "Latvian"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "Macedonian"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "ºÉÀ¼"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "²¨À¼ (qwerty ²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "²¨À¼ (qwertz ²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "ÆÏÌÑÑÀÓï"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "¼ÓÄôó (¿ý±±¿Ë)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "ÂÞÂíÄáÑÇ (qwerty ²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "ÂÞÂíÄáÑÇ (qwerty ²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "¶íÓï (Yawerty ²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "˹ÂåÎÄÄáÑÇ"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "˹Âå·¥¿Ë (QWERTZ ²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "˹Âå·¥¿Ë (QWERTY ²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "Serbian (cyrillic)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "Ì©¹úÓï"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr "Ì©¹úÓï"
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "ÍÁ¶úÆä (´«Í³ \"F\" ʽ)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "ÍÁ¶úÆä (ÏÖ´ú \"Q\" ʽ)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "ÎÚ¿ËÀ¼"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "ÃÀʽ¼üÅÌ (¹ú¼Ê)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Ô½ÄϼüÅÌ \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "ÄÏ˹À­·ò (À­¶¡)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid ""
-"Circular mounts %s\n"
-""
-msgstr ""
-"Ñ­»·×°ÔØ %s\n"
-""
-
-#: ../../lvm.pm_.c:83
-msgid ""
-"Remove the logical volumes first\n"
-""
-msgstr ""
-"ÏȲðжÂß¼­¾í\n"
-""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Êó±ê"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "±ê×¼"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "ÂÞ¼¼ MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "ÆÕͨ PS2 ¹öÂÖÊó±ê"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36
-#: ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37
-#: ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43
-#: ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "µ¥ ¼ü"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "ÆÕͨ"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "¹öÂÖ"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "´®ÐÐ"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "ÆÕͨ 2 ¼üÊó±ê"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "ÆÕͨ 3 ¼üÊó±ê"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serial, old C7 type)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "2 ¼ü"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "3 ¼ü"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "ûÓÐ"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "ûÓÐÊó±ê"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "Çë²âÊÔÄúµÄÊó±ê."
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "Òª¼¤»îÊó±ê,"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "ת¶¯¹öÂÖ!"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "Íê³É"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "ÏÂÒ»²½ ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<-Ç°Ò»²½"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "ÕâÑùÕýÈ·Âð?"
-
-#: ../../network/adsl.pm_.c:19
-#: ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Á¬½Óµ½»¥ÁªÍø"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"ÀûÓà ADSL Á¬½Ó×î³£Óõķ½·¨ÊÇ dhcp + pppoe.\n"
-"²»¹ý, ȷʵÓÐһЩÁ¬½ÓÊÇÖ»Óà dhcp. \n"
-"Èç¹ûÄú²»Çå³þ¾ÍÑ¡Ôñ 'ʹÓà pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "ʹÓÃdhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "ʹÓà pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "ʹÓà pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"ÄúÏëҪʹÓÃÄÄÖÖ DHCP ¿Í»§³ÌÐò?\n"
-"ȱʡµÄÊÇ dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"ûÓÐÔÚÄúµÄϵͳÀï·¢ÏÖÒÔÌ«Íø¿¨. \n"
-" ÎÞ·¨ÉèÖÃÕâ¸öÁ¬½ÓÀàÐÍ."
-
-#: ../../network/ethernet.pm_.c:92
-#: ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "Ñ¡ÔñÍøÂç½Ó¿Ú"
-
-#: ../../network/ethernet.pm_.c:93
-msgid "Please choose which network adapter you want to use to connect to Internet"
-msgstr "ÇëÑ¡ÔñÓÃÄĸöÍø¿¨Á¬½Ó»¥ÁªÍø."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ÕÒ²»µ½ÍøÂ翨"
-
-#: ../../network/ethernet.pm_.c:202
-#: ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "ÕýÔÚÅäÖÃÍøÂç"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Èç¹ûÄúÖªµÀ, ¾ÍÇëÊäÈëÄúµÄÖ÷»úÃû×Ö\n"
-"ÓÐЩ DHCP ·þÎñÆ÷ÐèÒªÖ÷»úÃû³Æ²ÅÄܹ¤×÷.\n"
-"ÄúµÄÖ÷»úÃû³Æ±ØÐèÊǸöÍêÈ«ÏÞ¶¨Ö÷»úÃû×Ö£¬\n"
-"ÀýÈç ``mybox.mylab.myco.com''"
-
-#: ../../network/ethernet.pm_.c:207
-#: ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "Ö÷»úÃû×Ö"
-
-#: ../../network/isdn.pm_.c:21
-#: ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91
-#: ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154
-#: ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190
-#: ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "ÍøÂçÅäÖÃ"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "ÍâÖÃISDNµ÷Öƽâµ÷Æ÷"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "ÄÚÖà ISDN ¿¨"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "ÄúµÄ ISDN Á¬½ÓÊÇʲôÀàÐÍ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-""
-msgstr ""
-"Äãϲ»¶ÄĸöISDNÅäÖÃ?\n"
-"\n"
-"* ÀϵÄÅäÖÃʹÓÃisdn4net, ¹¦ÄÜÇ¿´ó, ÅäÖÃÀ§ÄÑ.\n"
-"\n"
-"* еÄÅäÖüòµ¥Ò׶®£¬±ê×¼£¬¹¤¾ß½ÏÉÙ.\n"
-""
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "ÐÂÅäÖÃ(isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "ÀÏÅäÖÃ(isdn4net)"
-
-#: ../../network/isdn.pm_.c:169
-#: ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197
-#: ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN ÅäÖÃ"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"ÌôÑ¡ÄúµÄÌṩÉÌ. \n"
-"Èç¹ûËü²»ÔÚÁбíÀï, Ñ¡Ôñ  Unlisted"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "Å·ÖÞЭÒé"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "Å·ÖÞ (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr "ÆäËûµØÇøЭÒé"
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"ÆäËûµØÇø \n"
-" ûÓÐ D ÐŵÀ(רÏß)"
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "Äú½«Ê¹ÓÃÄÄÖÖЭÒé?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "ÇëÎÊÄúÊÊÅ俨µÄÖÖÀà?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "ÎÒ²»ÖªµÀ"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-""
-msgstr ""
-"\n"
-"Èç¹ûÄúµÄ¿¨ÊÇ ISA ¿¨, ÏÂÒ»ÆÁÄ»ÏÔʾµÄÖµÓ¦¸ÃÊÇÕýÈ·µÄ.\n"
-"\n"
-"Èç¹ûÄúµÄ¿¨ ÊÇ PCMCIA ¿¨, Äú±ØÐëÖªµÀËüµÄ irq ºÍ io.\n"
-""
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "ÖÐÖ¹"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "¼ÌÐø"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "ÄúµÄ ISDN ¿¨ÊÇÄĸö?"
-
-#: ../../network/isdn.pm_.c:234
-msgid "I have detected an ISDN PCI Card, but I don't know the type. Please select one PCI card on the next screen."
-msgstr ""
-"ÎÒ̽²âµ½Ò»¿é ISDN PCI ¿¨, ²»¹ýÎÞ·¨Ê¶±ðËüµÄÐͺÅ. ÇëÔÚÏÂÒ»ÆÁÄ»Àï\n"
-"Ñ¡ÔñÄúµÄ PCI ¿¨"
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "ûÓÐ̽²âµ½ ISDN PCI ¿¨. ÇëÔÚÏÂÒ»ÆÁÄ»ÀïÌôÑ¡Ò»ÖÖ."
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "ÇëÎÊÄúµÄµ÷Öƽâµ÷Æ÷ÊÇÁ¬½Óµ½ÄǸö´®Ðж˿Ú?"
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "²¦ºÅ½ÓÈëÑ¡Ïî"
-
-#: ../../network/modem.pm_.c:43
-#: ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "Á¬½ÓÃû³Æ"
-
-#: ../../network/modem.pm_.c:44
-#: ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "µç»°ºÅÂë"
-
-#: ../../network/modem.pm_.c:45
-#: ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "µÇ¼ÕʺÅ"
-
-#: ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "»ùÓڽű¾µÇ¼"
-
-#: ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "Öն˷½Ê½µÇ¼"
-
-#: ../../network/modem.pm_.c:48
-#: ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "ÍøÓòÃû³Æ"
-
-#: ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "Ê×Ñ¡ DNS ·þÎñÆ÷"
-
-#: ../../network/modem.pm_.c:50
-#: ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "µÚ¶þ¸ö ±¸Ñ¡DNS ·þÎñÆ÷"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Äú¿ÉÒÔÇжϵ½»¥ÁªÍøµÄÁ¬½Ó,»òÖØÐÂÅäÖÃÍøÂçÁ¬½Ó"
-
-#: ../../network/netconnect.pm_.c:33
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Äú¿ÉÒÔÖØÐÂÅäÖû¥ÁªÍøÁ¬½Ó"
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "ÄúÏÖÔÚÕýÁ¬½Óµ½»¥ÁªÍø"
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Á¬½Óµ½»¥ÁªÍø, »òÖØÐÂÅäÖÃÍøÂçÁ¬½Ó"
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "ÄúÏÖÔÚûÓÐÁ¬½Óµ½»¥ÁªÍø"
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "Á¬½Óµ½»¥ÁªÍø"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "¶Ï¿ªµ½»¥ÁªÍøµÄÁ¬½Ó"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "ÍøÂçÁ¬½ÓÅäÖÃ(LAN »ò»¥ÁªÍø)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "»¥ÁªÍøÁ¬½ÓºÍÅäÖÃ"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "ÏÖÔÚÅäÖÃ%sÍøÂçÁ¬½Ó."
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"ÏÖÔÚÅäÖà %s ÍøÂçÁ¬½Ó.\n"
-"\n"
-"\n"
-"°´ Íê³É ¼ÌÐø."
-
-#: ../../network/netconnect.pm_.c:129
-#: ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255
-#: ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "ÍøÂçÅäÖÃ"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.\n"
-""
-msgstr ""
-"ÄãÕýÔÚ°²×°ÍøÂç,ÄãµÄÍøÂçÒѾ­ÅäÖúÃ.\n"
-"µã»÷ È·¶¨ ±£´æÅäÖÃ, »ò È¡Ïû ÖØÐÂÅäÖÃÍøÂç.\n"
-""
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-""
-msgstr ""
-"»¶Ó­Ê¹ÓÃÍøÂçÅäÖþ«Áé\n"
-"\n"
-"ÅäÖÃinternet/ÍøÂçÁ¬½Ó.\n"
-"Èç¹ûÄã²»Ïë×Ô¶¯¼ì²â, ²»Ñ¡ ¼ìÑéºÐ.\n"
-""
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "Ñ¡ÔñÒªÅäÖõÄprofile"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "ʹÓÃ×Ô¶¯¼ì²â"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "ÕýÔÚ̽²âÉ豸..."
-
-#: ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "ÅäÖÃÆÕͨµ÷Öƽâµ÷Æ÷Á¬½Ó"
-
-#: ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "¼ì²â´®¿Ú %s"
-
-#: ../../network/netconnect.pm_.c:176
-#: ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ÅäÖà ISDN Á¬½Ó"
-
-#: ../../network/netconnect.pm_.c:176
-#: ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "¼ì²â %s"
-
-#: ../../network/netconnect.pm_.c:177
-#: ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ADSLÁ¬½Ó"
-
-#: ../../network/netconnect.pm_.c:177
-#: ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "ÍøÂç½Ó¿Ú¿¨ %s"
-
-#: ../../network/netconnect.pm_.c:178
-#: ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "ÅäÖÃÓÐÏßµçÀÂÁ¬½Ó"
-
-#: ../../network/netconnect.pm_.c:178
-#: ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "¼ì²âµ½ÓÐÏßµçÀÂÁ¬½Ó"
-
-#: ../../network/netconnect.pm_.c:179
-#: ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "ÅäÖþÖÓòÍøÁ¬½Ó"
-
-#: ../../network/netconnect.pm_.c:179
-#: ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "¼ì²âµ½Íø¿¨"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "Ñ¡ÔñÄúÏëÒªÅäÖõÄÁ¬½Ó"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-""
-msgstr ""
-"ÄãÅäÖÃÁ˶àÖÖInternet·ÃÎÊ·½Ê½.\n"
-"Ñ¡ÔñÄãҪʹÓõÄÒ»ÖÖ.\n"
-"\n"
-""
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "¹²Ïí»¥ÁªÍøÁ¬½Ó"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "ÄúÊÇ·ñÏ£ÍûÒ»¿ª»ú¾ÍÆô¶¯Á¬½Ó?"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "ÍøÂçÅäÖÃ"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr "ÍøÂçÐèÒªÖØÐÂÆô¶¯"
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"ÖØÐÂÆô¶¯ÍøÂç´íÎó: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-""
-msgstr ""
-"×£ºØ,ÍøÂçºÍinternetÅäÖÃÍê³É.\n"
-""
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr "½¨ÒéÖØÆô¶¯X"
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"¾¯¸æ: Õâ¸öÉ豸ÒѾ­±»ÅäÖÃÓÃÓÚ»¥ÁªÍøÁ¬½Ó..\n"
-"Òª±£ÁôÏÖÓеÄÅäÖÃֻҪѡÔñ È·¶¨.\n"
-"ÐÞ¸ÄÒÔϵÄÏîÄ¿½«¸²¸ÇÔ­ÓеÄÉ趨.."
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"ÇëÊäÈëÕą̂µçÄ﵀ IP ÅäÖÃ. \n"
-"ÏÂÁÐÏîÄ¿ÒªÇóÊäÈëÒÔ¾äµã·Ö¸ôÊ®½øÖƸñʽ±íʾµÄ IP µØÖ·.\n"
-" (ÀýÈç 192.168.1.1) "
-
-#: ../../network/network.pm_.c:297
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "ÕýÔÚÅäÖÃÍøÂçÉ豸 %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr "(Çý¶¯ %s)"
-
-#: ../../network/network.pm_.c:300
-#: ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP µØÖ·"
-
-#: ../../network/network.pm_.c:301
-#: ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "×ÓÍøÑÚÂë:"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "×Ô¶¯ÉèÖà IP"
-
-#: ../../network/network.pm_.c:323
-#: ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP µØÖ·µÄ¸ñʽӦ¸ÃÊÇ 1.2.3.4"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"ÇëÊäÈëÄúµÄÖ÷»úÃû³Æ\n"
-"ÄúµÄÖ÷»úÃû³Æ±ØÐèÊǸöÍêÈ«ÏÞ¶¨µÄÃû³Æ£¬ÀýÈç ``mybox.mylab.myco.com''\n"
-"Èç¹ûÄúÓÐÍø¹ØµÄ»°£¬Ò²ÇëÊäÈëÆä IP µØÖ·"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS ·þÎñÆ÷"
-
-#: ../../network/network.pm_.c:357
-#: ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "Íø¹Ø"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "Íø¹ØÉ豸"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "´úÀí·þÎñÆ÷ÅäÖÃ"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP ´úÀí·þÎñÆ÷"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP ´úÀí·þÎñÆ÷"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr "¼Ç¼Íø¿¨±êÖ¾"
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "´úÀí·þÎñÆ÷Ó¦¸ÃÊÇÏó http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "´úÀí·þÎñÆ÷Ó¦¸ÃÊÇÏó ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "»¥ÁªÍøÉ趨"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "ÄúÏëÒª²âÊÔÁ¬½Óµ½»¥ÁªÍøÂð?"
-
-#: ../../network/tools.pm_.c:43
-#: ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "ÕýÔÚ²âÊÔÁ¬½Ó..."
-
-#: ../../network/tools.pm_.c:49
-#: ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "ÄúÏÖÔÚÕýÁ¬½Óµ½»¥ÁªÍø"
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "ΪÁË°²È«, ¶Ï¿ªÁª½Ó"
-
-#: ../../network/tools.pm_.c:51
-#: ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"ϵͳûÓÐÁ¬½Óµ½»¥ÁªÍø.\n"
-"ÇëÖØг¢ÊÔÅäÖÃÄúµÄÁ¬½Ó."
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "Á¬½ÓÅäÖÃ"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "ÇëÌîд»òÑ¡ÔñÏÂÁÐÏîÄ¿"
-
-#: ../../network/tools.pm_.c:78
-#: ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "Íø¿¨µÄ IRQÖжÏ"
-
-#: ../../network/tools.pm_.c:79
-#: ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "Card mem (DMA)"
-
-#: ../../network/tools.pm_.c:80
-#: ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "Card IO"
-
-#: ../../network/tools.pm_.c:81
-#: ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "Card IO_0"
-
-#: ../../network/tools.pm_.c:82
-#: ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "Card IO_1"
-
-#: ../../network/tools.pm_.c:83
-#: ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "Äú×Ô¼ºµÄµç»°ºÅÂë"
-
-#: ../../network/tools.pm_.c:84
-#: ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "·þÎñÉÌÃû³Æ (Èç provider.net)"
-
-#: ../../network/tools.pm_.c:85
-#: ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "·þÎñÉ̵绰ºÅÂë"
-
-#: ../../network/tools.pm_.c:86
-#: ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "·þÎñÉÌ dns 1"
-
-#: ../../network/tools.pm_.c:87
-#: ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "·þÎñÉÌ dns 2"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "Ñ¡Ôñ¹ú¼Ò"
-
-#: ../../network/tools.pm_.c:89
-#: ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "²¦ºÅģʽ"
-
-#: ../../network/tools.pm_.c:90
-#: ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "Á¬½ÓËÙÂÊ"
-
-#: ../../network/tools.pm_.c:91
-#: ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "Á¬½Ó³¬Ê±(Ãë)"
-
-#: ../../network/tools.pm_.c:92
-#: ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "ÕÊ»§Ãû³Æ"
-
-#: ../../network/tools.pm_.c:93
-#: ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "ÕÊ»§¿ÚÁî"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "Õâ¸öƽ̨Éϲ»Ö§³ÖÀ©Õ¹·ÖÇø"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next to the extended partitions"
-msgstr ""
-"·ÖÇø±íÀïÓÐÒ»¶ÎÊÇ¿ÕµÄ, ¿ÉÊÇÎÒû·¨Ê¹ÓÃËü.\n"
-"ΨһµÄ°ì·¨ÊÇÒƶ¯ÄúµÄÖ÷·ÖÇø, °Ñ¿ÕÏв¿·Ö»»µ½ÓëÀ©Õ¹·ÖÇøÏàÁÚµÄλÖÃ."
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "´ÓÎļþ %s »Ö¸´Ê§°Ü: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "´íÎóµÄ±¸·ÝÎļþ"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "дÈëÎļþ %s ʧ°Ü"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"ÄãµÄÓ²ÅÌÓдí.\n"
-"ÍêÕûÐÔ¼ì²éʧ°Ü."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "±ØÐëÓµÓÐ"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "ÖØÒª"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "·Ç³£ºÃ"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "²»´í"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "»òÐíÓÐÓÃ"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - ÆÕͨUnix´òӡϵͳ"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - ÐÂÒ»´úLPR"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - ÐÐʽ´òÓ¡¾«Áé"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - ´òÓ¡£¬ ²»ÅŶÓÁÐ"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "±¾»ú´òÓ¡»ú"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "Ô¶³Ì´òÓ¡»ú"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "Ô¶³Ì CUPS ·þÎñÆ÷µÄ´òÓ¡»ú"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "Ô¶¶Ë lpd ·þÎñÆ÷µÄ´òÓ¡»ú"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "ÍøÂç´òÓ¡»ú (socket)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NTÉϵĴòÓ¡»ú"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "Novell·þÎñÆ÷´òÓ¡»ú"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "´òÓ¡»úÉ豸URI"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "×÷Òµpipe¶¨Ïòµ½ÃüÁî"
-
-#: ../../printer.pm_.c:418
-#: ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227
-#: ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "δ֪ģʽ"
-
-#: ../../printer.pm_.c:546
-#: ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr "Âã´òÓ¡»ú (ûÓÐÇý¶¯)"
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(ÔÚ %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "(ÔڸûúÆ÷ÉÏ)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Ñ¡Ôñ´òÓ¡»úÁ¬½Ó"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "´òÓ¡»úÊÇÈçºÎÁ¬½ÓµÄ?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"Ô¶³ÌµÄ CUPS ·þÎñÆ÷, Äú²»ÐèÒªÔÚÕâÀïÅäÖÃÈκδòÓ¡»ú.\n"
-"ËüÃǻᱻ×Ô¶¯Ì½²âµ½.\n"
-"²»È·¶¨µÄʱºò, ¾ÍÑ¡Ôñ \"Ô¶³Ì CUPS ·þÎñÆ÷\"."
-
-#: ../../printerdrake.pm_.c:84
-#: ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89
-#: ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "ûÓÐ"
-
-#: ../../printerdrake.pm_.c:85
-#: ../../printerdrake.pm_.c:160
-msgid "Choose a default printer!"
-msgstr "Ñ¡ÔñȱʡµÄÓû§!"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-"ʹÓÃÔ¶³ÌCUPS·þÎñÆ÷£¬Äã²»±ØÔÚÕâÅäÖôòÓ¡»ú£»CUPS·þÎñÆ÷»á×Ô¶¯Í¨ÖªÆä´òÓ¡»úÐÅÏ¢\n"
-"ËùÓÐÄã»úÆ÷ÖªµÀµÄ´òÓ¡»úÁÐÔÚ\"È´Ê¡´òÓ¡»ú\"Óò\n"
-"Ñ¡ÔñÈ´Ê¡´òÓ¡»ú²¢°´\"Ó¦ÓÃ/ÖضÁ´òÓ¡»ú\"°´Å¥. °´Ïàͬ°´Å¥Ë¢ÐÂÁбí.\n"
-"Èç¹ûÄãµÄCUPS·þÎñÆ÷ÔÚÆäËûµÄÍøÂ磬ÄãµÃÅäÖÃCUPSµÄIPµØÖ·¼°¶Ë¿Ú."
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Ò»°ã¶øÑÔ, CUPS»á¸ù¾ÝÍøÂç»·¾³×Ô¶¯ÅäÖÃ. Èç¹û×Ô¶¯ÅäÖò»ÕýÈ·,\n"
-"¹Ø±Õ \"×Ô¶¯CUPSÅäÖÃ\", ÊÖ¹¤ÅäÖà /etc/cups/cupsd.conf, ¶øºó²»ÒªÍü¼ÇÖØÐÂÆô¶¯CUPS·þÎñ(ÃüÁî: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:124
-#: ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294
-#: ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296
-#: ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "¹Ø±Õ"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "Ó¦ÓÃ/ÖضÁ´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP µØÖ·µÄ¸ñʽӦ¸ÃÊÇÏó 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:134
-#: ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "¶Ë¿ÚÐëΪÊý×Ö!"
-
-#: ../../printerdrake.pm_.c:141
-#: ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "È´Ê¡´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "CUPS ·þÎñÆ÷ IP"
-
-#: ../../printerdrake.pm_.c:147
-#: ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "¶Ë¿Ú"
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr "CUPS×Ô¶¯²½ÖèÅäÖÃ"
-
-#: ../../printerdrake.pm_.c:217
-msgid "Detecting devices ..."
-msgstr "ÕýÔÚ̽²âÉ豸..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "²âÊԶ˿Ú"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "ÕÒµ½Ò»Ì¨´òÓ¡»ú, ÐͺÅÊÇ \"%s\". "
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "±¾»ú´òÓ¡É豸"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-""
-msgstr ""
-"ÄúµÄ´òÓ¡»úÁ¬½ÓÔÚÄĸöÉ豸¶Ë¿Ú\n"
-"(Çë×¢Òâ /dev/lp0 Ï൱ÓÚ LPT1)?\n"
-""
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "´òÓ¡»úÉ豸"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "É豸/ÎļþÃû ûÓÐÕÒµ½"
-
-#: ../../printerdrake.pm_.c:274
-#: ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-msgid "Reading printer database ..."
-msgstr "¶ÁÈ¡´òÓ¡»úÊý¾Ý¿â..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "Ô¶¶Ë lpd ´òÓ¡»úÑ¡Ïî"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"ҪʹÓÃÒ»¸öÔ¶¶ËµÄ lpd ´òÓ¡¶ÓÁÐ, ÄúÐèÒªÖ¸¶¨´òÓ¡·þÎñÆ÷µÄ\n"
-"Ö÷»úÃûºÍ´òÓ¡ÈÎÎñÒªËÍÍùµÄ´òÓ¡¶ÓÁеÄÃû×Ö."
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "Ô¶¶ËÖ÷»úÃû"
-
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "Ô¶³Ì´òÓ¡»úÃû"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "δÕÒµ½Ô¶¶ËÖ÷»ú!"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "ûÓÐÕÒµ½Ô¶¶Ë´òÓ¡»ú!"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) ´òÓ¡»úÑ¡Ïî"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"Èç¹ûÄúҪʹÓõÄÊÇ SMB ´òÓ¡»ú (¾ÍÊÇ Windows 9x/NT ÍøÂç¹²Ïí´òÓ¡»ú),\n"
-"ÄúÐèҪ˵Ã÷Ö÷»úµÄ SMB Ãû×Ö (×¢Òâ! ÊÇÄúÔÚ Windows ÍøÂç\n"
-"ÁÚ¾ÓÀï¿´µ½µÄÖ÷»úÃû, ¿ÉÄÜÓëËüµÄ TCP/IP Ö÷»úÃû²»Í¬,), ¿ÉÄÜ»¹ÐèÒªËüµÄ IP µØÖ·,\n"
-"ÒÔ¼°ÓÐȨ·ÃÎÊ´òÓ¡»úµÄÓû§Ãû, ¹¤×÷×éºÍ¿ÚÁî, µ±È»»¹ÓдòÓ¡»úµÄ¹²ÏíÃû. "
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "SMB ·þÎñÆ÷Ö÷»ú"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "SMB ·þÎñÆ÷ IP"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "¹²ÏíÃû"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "¹¤×÷×é"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "ÊäÈë·þÎñÆ÷Ãû»ò·þÎñÆ÷µÄIP"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "Samba¹²ÏíÃû ûÓÐÕÒµ½"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "NetWare ´òÓ¡»úÑ¡Ïî"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"Èç¹ûÄúҪʹÓõÄÊÇ NetWare ´òÓ¡»ú, ÄúÐèҪ˵Ã÷Ö÷»úµÄ NetWare Ãû×Ö (×¢Òâ! \n"
-"¿ÉÄÜÓëËüµÄ TCP/IP Ö÷»úÃû²»Í¬), ÒÔ¼°ÓÐȨ·ÃÎÊ´òÓ¡»úµÄÓû§ÃûºÍ¿ÚÁî, \n"
-"µ±È»»¹ÓдòÓ¡»úµÄ´òÓ¡¶ÓÁÐÃû. "
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "´òÓ¡·þÎñÆ÷"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "´òÓ¡¶ÓÁÐÃû"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "NCP ·þÎñÆ÷δÕÒµ½"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "NCP ¶ÓÁÐÃûδÕÒµ½"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Socket ´òÓ¡»úÑ¡Ïî"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"Òª´òÓ¡µ½Ò»Ì¨Socket´òÓ¡»ú, ÄúÐèÒªÌṩ\n"
-"´òÓ¡»úµÄÖ÷»úÃûºÍ¿ÉÑ¡µÄ¶Ë¿ÚºÅÂë.\n"
-"HP JetDirectͨ³£Óö˿Ú9100."
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "´òÓ¡»úÖ÷»úÃû"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "ûÓдòÓ¡»úÖ÷»úÃû!"
-
-#: ../../printerdrake.pm_.c:566
-#: ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "´òÓ¡»úÉ豸"
-
-#: ../../printerdrake.pm_.c:567
-msgid "You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers."
-msgstr "Äã¿ÉÒÔÖ±½ÓÖ¸¶¨URI·ÃÎÊ´òÓ¡»ú. URI·ûºÏCUPS »ò Foomatic¹æ¶¨."
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "±ØÐëÊÇÓÐЧµÄURI!"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"ÿ̨´òÓ¡»úÐèÒªÒ»¸öÃû×Ö(Èç lp).\n"
-"ÃèÊöºÍλÖÿÉÒÔ²»Ìí."
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "´òÓ¡»úÃû×Ö"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "ÃèÊö"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "λÖÃ"
-
-#: ../../printerdrake.pm_.c:701
-msgid "Preparing printer database ..."
-msgstr "×¼±¸´òÓ¡»úÊý¾Ý..."
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "´òÓ¡»úÑ¡Ôñ"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "ÇëÎÊÄú´òÓ¡»úµÄÐͺŠ?"
-
-#: ../../printerdrake.pm_.c:866
-msgid "OKI winprinter configuration"
-msgstr "OKI´òÓ¡»úÅäÖÃ"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr "ÄãÕýÔÚÅäÖÃOKI win´òÓ¡»ú, ÒòÆäʹÓÃÌرðµÄͨѶЭÒé, Ö»ÄÜÁ¬ÔÚµÚÒ»¸ö´òÓ¡¿Ú."
-
-#: ../../printerdrake.pm_.c:916
-#: ../../printerdrake.pm_.c:946
-msgid "Lexmark inkjet configuration"
-msgstr "ÀûÃË´òÓ¡»úÉ趨"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr "ÀûÃËÅçÄ«´òÓ¡»ú½ö½öÖ§³Ö±¾µØ´òÓ¡."
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-"ÅäÖÃÀûÃËÅçÄ«´òÓ¡»úÐèÒª´ÓÀûÃËÍøÕ¾(http://www.lexmark.com/)\n"
-"ÏÂÔØ\"Linux\"Çý¶¯."
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"´òÓ¡»úÈ´Ê¡ÉèÖÃ\n"
-"È·¶¨Ö½ÕÅ´óС¡¢Ä«Ë®ÀàÐÍÕýÈ·."
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Ñ¡Ïî %s ±ØÐëÊÇÕûÊý!"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Ñ¡Ïî %s ±ØÐëÊÇÊý×Ö!"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Ñ¡Ïî %s³¬³ö·¶Î§!"
-
-#: ../../printerdrake.pm_.c:1136
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"ÄãÏ£ÍûÉèÖôòÓ¡»ú(\"%s\")\n"
-"Ϊȴʡ´òÓ¡»ú?"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "²âÊÔÒ³"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"ÇëÑ¡ÔñÒª´òÓ¡µÄ²âÊÔÒ³.\n"
-"×¢Òâ: ÕÕƬҪ»¨Ï൱³¤µÄʱ¼ä.\n"
-"Ò»°ãÑ¡Ôñ±ê×¼²âÊÔÒ³."
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "ûÓвâÊÔÒ³"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "´òÓ¡"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "±ê×¼²âÊÔÒ³"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr "¿É»»²âÊÔÒ³(ÐÅÖ½)"
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr "Ìæ»»²âÊÔÒ³ (A4)"
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "ÕÕƬ²âÊÔÒ³"
-
-#: ../../printerdrake.pm_.c:1175
-#: ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "ÕýÔÚ´òÓ¡²âÊÔÒ³..."
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-""
-msgstr ""
-"²âÊÔÒ³ÒѾ­·¢Ë͵½´òÓ¡»úºǫ́³ÌÐò. ¹ýһС¶Îʱ¼ä´òÓ¡»ú½«¿ªÊ¼¹¤×÷.\n"
-"´òӡ״̬:\n"
-"%s\n"
-"\n"
-""
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-""
-msgstr ""
-"²âÊÔÒ³ÒѾ­·¢Ë͵½´òÓ¡»úºǫ́³ÌÐò. ¹ýÒ»ÉÙ¶Îʱ¼ä´òÓ¡»ú½«¿ªÊ¼¹¤×÷.\n"
-""
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "¹¤×÷Õý³£?"
-
-#: ../../printerdrake.pm_.c:1229
-#: ../../printerdrake.pm_.c:2025
-msgid "Raw printer"
-msgstr "Âã´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or \"qtcups <file>\". The graphical tools allow you to choose the printer and to modify the option settings easily.\n"
-""
-msgstr ""
-"ÃüÁîÐдòÓ¡¿ÉʹÓÃÃüÁî\"%s <Îļþ>\" »òͼÐδòÓ¡¹¤¾ß: \"xpp <Îļþ>\" »ò \"qtcups <Îļþ>\".\n"
-""
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.\n"
-""
-msgstr ""
-"¸ÃÃüÁîÄã¿ÉÓÃÔÚÐí¶àÓ¦ÓõĴòÓ¡¶Ô»°¿òµÄ\"´òÓ¡ÃüÁî\"Ïî.\n"
-""
-
-#: ../../printerdrake.pm_.c:1242
-#: ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"\"%s\"ÃüÁîÒ²¿ÉÓÃÀ´Ð޸ĴòÓ¡×÷ÒµµÄÑ¡Ïî."
-
-#: ../../printerdrake.pm_.c:1244
-#: ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-""
-msgstr ""
-"µã»÷\"´òÓ¡Ñ¡Ïî\"ÁоٴòÓ¡»úµÄÑ¡Ïî.\n"
-"\n"
-""
-
-#: ../../printerdrake.pm_.c:1249
-#: ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s <file>\".\n"
-""
-msgstr ""
-"ÃüÁîÐдòÓ¡ÎļþʹÓÃÃüÁî\"%s <Îļþ>\".\n"
-""
-
-#: ../../printerdrake.pm_.c:1251
-#: ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.\n"
-""
-msgstr ""
-"¸ÃÃüÁîÄã¿ÉÓÃÔÚÐí¶àÓ¦ÓõĴòÓ¡¶Ô»°¿òµÄ\"´òÓ¡ÃüÁî\"Ïî.\n"
-""
-
-#: ../../printerdrake.pm_.c:1256
-#: ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the \"Print option list\" button.\n"
-"\n"
-""
-msgstr ""
-"µã»÷\"´òÓ¡Ñ¡Ïî\"ÁоٴòÓ¡»úµÄÑ¡Ïî.\n"
-"\n"
-""
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s <file>\" or \"%s <file>\".\n"
-""
-msgstr ""
-"ÓÃÃüÁî\"%s <Îļþ>\"»ò\"%s <Îļþ>\"´òÓ¡Îļþ.\n"
-""
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an icon on the desktop, labeled with \"STOP Printer!\", which stops all print jobs immediately when you click it. This is for example useful for paper jams.\n"
-""
-msgstr ""
-"Äã¿ÉÒÔÓÃͼÐνӿÚ\"xpdq\"ÉèÖôòÓ¡Ñ¡ÏîºÍ´¦Àí´òÓ¡×÷Òµ.\n"
-"Èç¹ûÄãʹÓÃKDE, ×ÀÃæÉÏÓÐ\"Í£Ö¹´òÓ¡»ú!\"°´Å¥ÓÃÓÚÈ¡Ïû´òÓ¡×÷Òµ.\n"
-""
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\".\n"
-""
-msgstr ""
-"\n"
-"\"%s\"ºÍ\"%s\"ÃüÁîÔÊÐíÐ޸ĴòÓ¡×÷ÒµµÄÑ¡Ïî.\n"
-""
-
-#: ../../printerdrake.pm_.c:1292
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "ÕýÔÚ\"%s\"´òÓ¡»úÉÏ´òÓ¡"
-
-#: ../../printerdrake.pm_.c:1294
-msgid "Print option list"
-msgstr "´òÓ¡»úÑ¡Ïî"
-
-#: ../../printerdrake.pm_.c:1318
-#: ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "¶ÁÈ¡´òÓ¡»úÊý¾Ý..."
-
-#: ../../printerdrake.pm_.c:1338
-#: ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "´«ËÍ´òÓ¡»úÅäÖÃ"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-""
-msgstr ""
-"Äã¿ÉÒÔ¸´ÖÆ×öºÃµÄ´òÓ¡»úÅäÖôÓ%sµ½µ±Ç°µÄ%s.\n"
-"ËùÓÐÅäÖÃÊý¾Ý½«±»¸²¸Ç£¬´òÓ¡×÷Òµ²»»á´«ËÍ.\n"
-"ÓÉÓÚÒ»ÏÂÔ­Òò²»ÊÇËùÓжÓÁж¼»á´«ËÍ:\n"
-""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-""
-msgstr ""
-"CUPS²»Ö§³ÖNovell·þÎñÆ÷ÉϵĴòÓ¡»ú¼°·¢ËÍÊý¾Ýµ½ÎÞ¸ñʽÃüÁîµÄ´òÓ¡»ú.\n"
-""
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-""
-msgstr ""
-"PDQÖ»Ö§³Ö±¾µØ´òÓ¡»ú,Ô¶³ÌLPD´òÓ¡»ú, ºÍ Socket/TCP ´òÓ¡»ú.\n"
-""
-
-#: ../../printerdrake.pm_.c:1353
-msgid ""
-"LPD and LPRng do not support IPP printers.\n"
-""
-msgstr ""
-"LPD ºÍ LPRng²»Ö§³ÖIPP´òÓ¡»ú.\n"
-""
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-"¸Ã³ÌÐòûÓн¨Á¢¶ÓÁлò\n"
-"\"foomatic ÅäÖÃ\"ÎÞ·¨´«ËÍ"
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-"\n"
-"´òÓ¡»ú¿ÉÒÔÅäÖÃÓó§¼ÒÌṩµÄPPD»òÎÞ·¨´«Ë͵ÄCUPSÇý¶¯."
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Ñ¡ÔñÄãÒª´«Ë͵ĴòÓ¡»ú²¢µã»÷\"´«ËÍ\"."
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "²»´«ËÍ´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:1364
-#: ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "´«ËÍ"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"´òÓ¡»ú\"%s\"ÒѾ­ÔÚ%s´æÔÚ.\n"
-"µã»÷ \"´«ËÍ\" ¸²¸ÇÅäÖÃ.\n"
-"ÄãÒ²¿ÉÒÔÑ¡ÔñеÄÃû³Æ»òÂÔ¹ý¸Ã´òÓ¡»ú."
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "´òÓ¡»úÃû³Æ¿ÉÒÔ°üº¬×Öĸ, Êý×Ö ºÍ Ï»®Ïß"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"´òÓ¡»ú \"%s\"ÒѾ­´æÔÚ,\n"
-"ÕæµÄ¸²¸ÇÅäÖÃ?"
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "дòÓ¡»úÃû³Æ"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "´«ËÍ %s ..."
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-"ÄãÒѾ­´«ËÍÀϵÄÈ´Ê¡´òÓ¡»ú(\"%s\"),\n"
-"ÊÇ·ñÉèÖÃΪдòӡϵͳµÄÈ´Ê¡´òÓ¡»ú %s?"
-
-#: ../../printerdrake.pm_.c:1423
-msgid "Refreshing printer data ..."
-msgstr "ˢдòÓ¡»úÊý¾Ý..."
-
-#: ../../printerdrake.pm_.c:1431
-#: ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr "ÅäÖÃÔ¶³Ì´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:1432
-msgid "Starting network ..."
-msgstr "ÕýÔÚÆô¶¯ÍøÂç..."
-
-#: ../../printerdrake.pm_.c:1454
-#: ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-msgid "Configure the network now"
-msgstr "ÕýÔÚÅäÖÃÍøÂç"
-
-#: ../../printerdrake.pm_.c:1455
-msgid "Network functionality not configured"
-msgstr "ÉÐδÍê³ÉÍøÂçÅäÖÃ"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-"ÄãÔÚÅäÖÃÔ¶³Ì´òÓ¡»ú. ÐèÒªÍøÂç·ÃÎÊ,\n"
-"µ«Ä㻹ûÓÐÅäÖÃÍøÂç. ¼ÌÐøÂð?"
-
-#: ../../printerdrake.pm_.c:1463
-msgid "Go on without configuring the network"
-msgstr "ÂÔ¹ýÅäÖüÌÐø"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-"°²×°Ê±µÄÍøÂçÅäÖÃÎÞ·¨Æô¶¯.\n"
-"¿ª»úºó¼ì²éÍøÂç»òÓà Mandrake ÅäÖÃÖÐÐÄÐÞ¸Ä,½Ú \"ÍøÂçºÍÒòÌØÍø\"/\"Á¬½Ó\", È»ºóÓÃ\"Ó²¼þ\"/\"´òÓ¡»ú\"ÅäÖôòÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-"ÍøÂçûÓÐÆô¶¯²¢ÇÒÎÞ·¨Æô¶¯.\n"
-"¼ì²éÓ²¼þ»÷ÅäÖÃ. È»ºóÔÙÅäÖÃÔ¶³Ì´òÓ¡."
-
-#: ../../printerdrake.pm_.c:1516
-msgid "Restarting printing system ..."
-msgstr "ÖØÐÂÆô¶¯´òÓ¡»úϵͳ ..."
-
-#: ../../printerdrake.pm_.c:1548
-msgid "high"
-msgstr "¸ß"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "paranoid"
-msgstr "¹ý·Ö"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "ÔÚ%s°²È«¼¶±ðÉÏ°²×°´òӡϵͳ"
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-"ÄãÕýÔÚ°²×°%s´òӡϵͳÔÚ%s°²È«¼¶±ðµÄϵͳÉÏ.\n"
-"\n"
-"¸Ã´òӡϵͳÔÚºǫ́ÔËÐÐÁôÊسÌÐò, ÁôÊسÌÐòÄÜͨ¹ýÍøÂç\n"
-"½øÐÐÔ¶³Ì·ÃÎÊ,¶ø¿ÉÄÜÔâÊܹ¥»÷. ¸Ã°²È«¼¶±ðÈ´Ê¡\n"
-"Æô¶¯ÉÙÊýÑ¡ÔñµÄÁôÊسÌÐò.\n"
-"\n"
-"ÄãÒªÅäÖôòÓ¡Âð?"
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Starting the printing system at boot time"
-msgstr "¿ª»úʱÆô¶¯´òӡϵͳ"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-"´òӡϵͳ(%s) ¿ª»úʱ²»»á×Ô¶¯Æô¶¯.\n"
-"\n"
-"ÄãÏ£ÍûÈôòӡϵͳ×Ô¶¯Æô¶¯Âð?"
-
-#: ../../printerdrake.pm_.c:1612
-#: ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671
-#: ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "¼ì²éÒѾ­°²×°µÄÈí¼þ..."
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "ɾ³ý LPRng..."
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "ɾ³ý LPD ..."
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "Ñ¡Ôñ´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "ÄúÐèҪʹÓÃÄÄÖÖ´òӡϵͳ?"
-
-#: ../../printerdrake.pm_.c:1759
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "É趨´òÓ¡»ú\"%s\" ..."
-
-#: ../../printerdrake.pm_.c:1806
-#: ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026
-#: ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "´òÓ¡»úÑ¡Ïî"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr "×¼±¸´òÓ¡»ú¾«Áé..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "ÄúÏëÒªÅäÖôòÓ¡»úÂð ?"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr "´òӡϵͳ:"
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-"ÏÂÁдòÓ¡»úÒÑÅäÖÃ.\n"
-"µã»÷È¥Ð޸Ļò¶ÁÈ¡ÐÅÏ¢,\n"
-"µã»÷\"Ôö¼Ó´òÓ¡»ú\"Ôö¼ÓеĴòÓ¡»ú."
-
-#: ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "ÆÕͨģʽ"
-
-#: ../../printerdrake.pm_.c:1891
-#: ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (ȱʡ)"
-
-#: ../../printerdrake.pm_.c:1895
-#: ../../printerdrake.pm_.c:1935
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "Ô¶³Ì CUPS ·þÎñÆ÷µÄ´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:1896
-#: ../../printerdrake.pm_.c:1936
-msgid "Printer(s) on remote server(s)"
-msgstr "Ô¶³Ì CUPS ·þÎñÆ÷µÄ´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:1898
-#: ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922
-#: ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "Ôö¼Ó´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:1977
-#: ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-msgid "Do you want to configure another printer?"
-msgstr "ÄúÏëÒªÅäÖÃÆäËû´òÓ¡»úÂð ?"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "Ð޸ĴòÓ¡»úÅäÖÃ"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"´òÓ¡»ú %s: %s %s\n"
-"ÒªÐÞ¸ÄÂð?"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "Ö´ÐÐ!"
-
-#: ../../printerdrake.pm_.c:2015
-#: ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "´òÓ¡»úÁ¬½ÓÀàÐÍ"
-
-#: ../../printerdrake.pm_.c:2016
-#: ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "´òÓ¡»úÃû³Æ, ÃèÊö, λÖÃ"
-
-#: ../../printerdrake.pm_.c:2018
-#: ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "´òÓ¡»ú³§¼Ò, ÐͺÅ, Çý¶¯"
-
-#: ../../printerdrake.pm_.c:2019
-#: ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "´òÓ¡»ú³§¼Ò, ÐͺÅ"
-
-#: ../../printerdrake.pm_.c:2028
-#: ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr "ÉèÖøôòÓ¡»úΪȴʡ"
-
-#: ../../printerdrake.pm_.c:2029
-#: ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "´òÓ¡²âÊÔÒ³"
-
-#: ../../printerdrake.pm_.c:2030
-#: ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr "ÖªµÀÔõÑùÓøôòÓ¡»ú´òÓ¡"
-
-#: ../../printerdrake.pm_.c:2031
-#: ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "ɾ³ý´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:2071
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "ɾ³ý¾É´òÓ¡»úÊý¾Ý\"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "´òÓ¡»ú \"%s\" ÉèΪȴʡ´òÓ¡»ú."
-
-#: ../../printerdrake.pm_.c:2103
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "ÕæµÄɾ³ý´òÓ¡»ú\"%s\"?"
-
-#: ../../printerdrake.pm_.c:2105
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "ɾ³ý´òÓ¡»ú\"%s\" ..."
-
-#: ../../proxy.pm_.c:29
-#: ../../proxy.pm_.c:37
-#: ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "´úÀí·þÎñÆ÷ÅäÖÃ"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-""
-msgstr ""
-"»¶Ó­Ê¹ÓôúÀíÅäÖù¤¾ß.\n"
-"\n"
-"Äã¿ÉÒÔÉèÖÃÐèÒªÓû§ÃûºÍ¿ÚÁîÒÔ¼°\n"
-"²»ÐèÒªÓû§ÃûºÍ¿ÚÁîµÄhttpºÍftp´úÀí\n"
-""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr "ÊäÈëhttp´úÀíÐÅÏ¢"
-
-#: ../../proxy.pm_.c:39
-#: ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40
-#: ../../proxy.pm_.c:61
-msgid "port"
-msgstr "¶Ë¿Ú"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "´úÀí·þÎñÆ÷Ó¦¸ÃÊÇÒÔ 'http:'¿ªÍ·"
-
-#: ../../proxy.pm_.c:48
-#: ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "¶Ë¿ÚÐëΪÊý×Ö"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr "ÊäÈëftp´úÀíÐÅÏ¢"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "´úÀí·þÎñÆ÷Ó¦¸ÃÊÇÒÑ 'ftp:'¿ªÍ·"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr "ÊäÈë´úÀíÓû§ºÍÃÜÂë"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "怬"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "¿ÚÁî"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "ÖØÊä¿ÚÁî"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Á½´Î¿ÚÁî²»·û.ÖØÊÔ!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "ÎÞ·¨¼ÓÈëÒ»¸ö·ÖÇøµ½ÒѾ­¸ñʽ»¯µÄÓ²ÅÌÕóÁÐ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "ÎÞ·¨Ð´Èë %s Îļþ"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ʧ°Ü"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ʧ°Ü (¿ÉÄÜȱÉÙ raidtools ?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid ""
-"Not enough partitions for RAID level %d\n"
-""
-msgstr ""
-"ûÓÐ×ã¹»µÄ·ÖÇø½¨Á¢ %d ¼¶µÄÓ²ÅÌÕóÁÐ\n"
-""
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Æô¶¯ALSAÓïÒôϵͳ"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron Ò»¸öÃüÁÆÚµ÷¶È³ÌÐò."
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd ¼àÊÓµç³Ø״̬, ²¢Í¨¹ý syslog ×÷¼Ç¼.\n"
-"Ëü»¹ÄÜÓÃÀ´ÔÚµç³Ø²»×ãʱ¹Ø±Õ»úÆ÷."
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"ʹÓà at ÃüÁî¿ÉÒÔÔÚÖ¸¶¨Ê±¼äÔËÐÐÄúµÄÃüÁî. \n"
-"»¹¿ÉÒÔÔÚƽ¾ù¸ºÔØ×ã¹»µÍµÄʱºòÔËÐÐÅú´¦ÀíÃüÁî."
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron ÊÇÒ»¸ö±ê×¼µÄ UNIX ³ÌÐò, Ëü¿ÉÒÔ¶¨ÆÚµÄÖ´ÐÐÓû§Ö¸¶¨µÄ³ÌÐò.\n"
-"vixie cron ÔÚ»ù±¾µÄ UNIX cron ÉÏÔö¼ÓÁËһЩÌØÐÔ, °üÀ¨¸Ä½øµÄ°²È«ÐÔ, \n"
-"ºÍ¸üÇ¿´óµÄÅäÖÃÑ¡Ïî."
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM Ϊ»ùÓÚÎı¾µÄ Linux Ó¦ÓóÌÐòÌṩ¶ÔÊó±êµÄÖ§³Ö, Èç MC ÃüÁî½âÊÍÆ÷.\n"
-"ËüͬʱÌṩÁËÀûÓÃÊó±êµÄ¿ØÖÆ̨ '¸´ÖÆ-Õ³Ìù' ²Ù×÷, »¹Ö§³Ö¿ØÖÆ̨ÉϵÄ\n"
-"µ¯³öʽ²Ëµ¥."
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"ħÁ¦Ó²ÅÌHardDrake½øÐÐÓ²¼þ¼ì²â£¬ÒÔ¼°Ñ¡ÏîÅäÖÃ\n"
-"ÐÂÔö/ÐÞ¸ÄÓ²¼þ"
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr ""
-"Apache ÊÇÒ»¸ö WWW ÍòάÍø·þÎñÆ÷. ËüÌṩ HTML Îļþ\n"
-"ºÍ CGI µÈ·þÎñ."
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"»¥ÁªÍø³¬¼¶ºǫ́·þÎñÆ÷ (³£³Æ×÷ inetd) ÔÚÐèҪʱÆô¶¯ºÜ¶àÆäËûµÄ»¥ÁªÍø·þÎñ.\n"
-"Ëü¸ºÔðÏìÓ¦¶àÖÖ·þÎñ, °üÀ¨ telnet, ftp, rsh, ºÍ rlogin.\n"
-"½ûÖ¹ inetd ¾Íͬʱ½ûÖ¹ÁËËü¸ºÔðµÄËùÓзþÎñ."
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Æô¶¯ ºËÐÄ 2.2, ÉèÖ÷À»ðǽ\n"
-"ÒÔ±£»¤ÄãµÄ»úÆ÷²»ÊÜÍøÂç¹¥»÷"
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Õâ¸ö³ÌÐò°´ÕÕ /etc/sysconfig/keyboard µÄÉ趨¼ÓÔØÑ¡ÔñµÄ¼üÅÌÓ³Éä.\n"
-"Äú¿ÉÒÔʹÓà kbdconfig ¹¤¾ßÐÞ¸ÄÕâ¸öÉ趨.¶Ô´ó¶àÊý»úÆ÷, Ó¦¸Ã¿ªÆôÕâ¸ö·þÎñ."
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"×Ô¶¯Éú³É /bootϵÄ\n"
-"/usr/include/linux/{autoconf,version}.hÍ·Îļþ"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "¿ª»úʱ×Ô¶¯¼à²âºÍÅäÖÃÓ²¼þ"
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr "LinuxconfÔÚ¿ª»úʱ»áÖ´ÐÐһЩÈÎÎñÀ´Î¬»¤ÏµÍ³ÅäÖÃ"
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd ÊDZ£Ö¤ lpr Õý³£¹¤×÷µÄºǫ́´òÓ¡·þÎñ. Õâ¸ö·þÎñÆ÷µÄ»ù±¾¹¦ÄÜÊÇ\n"
-"°Ñ´òÓ¡·þÎñÖ¸Òýµ½ÏàÓ¦µÄ´òÓ¡»ú."
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr "LinuxÐéÄâ·þÎñÆ÷£¬ ÓÃÀ´¹¹¼Ü¸ßЧºÍ¸ß¿ÉÓÃϵͳ"
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) ÊÇÒ»¸ö DNS ÓòÃû½âÎö·þÎñÆ÷, \n"
-"ÓÃÀ´°ÑÖ÷»úÃû×Ö½âÎö³É IP µØÖ·."
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"×°ÔغÍжÔØËùÓÐµÄ Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), ºÍ NCP (NetWare) ×°Ôصã."
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr "ÔÚ¿ª»úʱ, ¼¤»î»òÕß½ûÖ¹ËùÓÐÒѾ­ÅäÖõÄÍøÂç½Ó¿Ú¿¨."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ÊÇÒ»¸öÔÚ TCP/IP ÍøÂçÉϹ²ÏíÎļþµÄ³£ÓÃЭÒé.\n"
-"Õâ¸ö·þÎñÌṩ NFS ·þÎñÆ÷¹¦ÄÜ, ËüµÄÅäÖÃÊÇͨ¹ý\n"
-"/etc/exports Îļþ½øÐÐ."
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ÊÇÒ»¸öÔÚ TCP/IP ÍøÂçÉϹ²ÏíÎļþµÄ³£ÓÃЭÒé.\n"
-"Õâ¸ö·þÎñÌṩ NFS ·þÎñÆ÷¹¦ÄÜ"
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr "¿ª»úʱÔÚ¿ØÖÆ̨ºÍX´°¿Ú×Ô¶¯Çл» numlock¼ü"
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Ö§³ÖOKI 4w¼°Æä¼æÈÝWin´òÓ¡»ú"
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA Ö§³Öͨ³£ÊÇÔÚ±ãЯ»úÉÏÓÃÀ´Ö§³ÖÍø¿¨ºÍµ÷Öƽâµ÷Æ÷Ö®ÀàµÄÍâÉè.\n"
-"³ý·Ç±»ÅäÖÃʹÓÃËü²»»á×Ô¼ºÆð¶¯, ËùÓÐÔÚ²»ÐèÒªËüµÄ»úÆ÷ÉÏ°²×°ËüҲûÓÐΣÏÕ."
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper ÓÃÀ´¹ÜÀí RPC Á¬½Ó, ÔÚ NFS ºÍ NIS µÈЭÒéÖлáÓõ½Ëü.\n"
-"Äú±ØÐëÔËÐÐÕâ¸ö portmap ·þÎñÆ÷, Èç¹ûÕą̂»úÆ÷Òª×÷Ϊ·þÎñÆ÷Ö§³ÖÕâЩ\n"
-"ÀûÓà RPC »úÖƵÄЭÒé."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr ""
-"Postfix ÊÇÒ»¸öÓʼþ´«µÝ´úÀí, Õâ¸ö³ÌÐò°ïÖúÄú°Ñµç×ÓÓʼþ´Ó\n"
-"һ̨»úÆ÷Ë͵½Áíһ̨."
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr "ΪÁ˲úÉú¸ü¸ßÆ·ÖʵÄËæ»úÊý, ±£´æºÍ»Ö¸´ÏµÍ³µÄ entropy pool"
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Ö¸¶¨¿éÉ豸(ÈçÓ²ÅÌ·ÖÇø)µÄRAWԭʼÉ豸\n"
-"¹©OracleÖ®ÀàµÄÓ¦ÓÃÓÃ"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"ºǫ́·þÎñ routed ÔÊÐíͨ¹ý RIP ЭÒé×Ô¶¯¸üÐ嵀 IP ·Óɱí.\n"
-"ÔÚСÐÍÍøÂçÉϹ㷺µÄ²ÉÓà RIP, È»¶øÔÚ¸ü¸´ÔÓµÄÍøÂçÉÏÐèÒª¸ü¸´ÔӵķÓÉЭÒé."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr "rstat ЭÒéÔÊÐíÍøÂçÉϵÄÓû§»ñÈ¡ÍøÂçÉÏÈκλúÆ÷µÄÐÔÄÜÖ¸±ê."
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr "rusers ЭÒéÔÊÐíÍøÂçÉϵÄÓû§Ê¶±ðÔÚÆäËû×÷³öÓ¦´ðµÄ»úÆ÷ÉÏÓÐÄÄЩÓû§µÇ¼."
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho ЭÒéʹԶ¶ËµÄÓû§¿ÉÒԵõ½ÔËÐÐÁË rwho ºǫ́·þÎñµÄ\n"
-"»úÆ÷ÉÏËùÓеǼÓû§µÄÇåµ¥ (ÀàËÆ finger)."
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "Æô¶¯ÓïÒôϵͳ"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog ÊÇÕâÑùÒ»¸öÉèÊ©, ºÜ¶àÆäËûµÄºǫ́·þÎñÀûÓÃËüÔÚ\n"
-"¸÷ÖÖϵͳÈÕÖ¾ÎļþÖмǼÈÕÖ¾ÏûÏ¢. Ò»Ö±ÔËÐÐ syslog ÊǸöºÃÖ÷Òâ."
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "ÔØÈëUSBÉ豸µÄÇý¶¯"
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Æ𶯠X ×ÖÌå·þÎñ(X´°¿Úϵͳ±ØÐë)."
-
-#: ../../services.pm_.c:114
-#: ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Ñ¡Ôñ¿ª»úʱ×Ô¶¯Æô¶¯µÄ·þÎñ"
-
-#: ../../services.pm_.c:126
-msgid "Printing"
-msgstr "ÕýÔÚ´òÓ¡"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "»¥ÁªÍø"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr "Îļþ¹²Ïí"
-
-#: ../../services.pm_.c:132
-msgid "System"
-msgstr "ϵͳ"
-
-#: ../../services.pm_.c:137
-msgid "Remote Administration"
-msgstr "Ô¶¶Ë¹ÜÀí"
-
-#: ../../services.pm_.c:145
-msgid "Database Server"
-msgstr "Êý¾Ý¿â·þÎñÆ÷"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "·þÎñ: %2$d µÇ¼ÇµÄ %1$d ¼¤»î"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "·þÎñ"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "ÔËÐÐ"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "Í£Ö¹"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "·þÎñ¼°ÁôÊسÌÐò"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr "ûÓи÷þÎñµÄ¸½¼ÓÐÅÏ¢."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Æô¶¯Ê±"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "ÕýÔÚ°²×°³ÌÐò ..."
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"ÎÒ¶Á²»³ö·ÖÇø±í, Õâ¸ö·ÖÇø±íÆÆ»µµÃÌ«ÑÏÖØÁË :(\n"
-"ÎÒÏÖÔÚ³¢ÊÔÇå³ý»µ·ÖÇø."
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "´íÎó!"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "ÎÞ·¨ÕÒµ½Ó³ÏóÎļþ '%s'."
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "×Ô¶¯°²×°ÅäÖÃ"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've performed on this computer, being interactively prompted for some steps, in order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"ÏÖÔÚÅäÖÃ×Ô¶¯°²×°ÈíÅÌ. СÐĵã.\n"
-"\n"
-"Äã¿ÉÒÔÖظ´¸Ã»úÆ÷µÄ°²×°, ½»»¥Ìáʾ²½Öè, ÐÞ¸ÄÊýÖµ.\n"
-"\n"
-"Ϊ°²È«Æð¼û, ·ÖÇø¼°¸ñʽ»¯²»»á×Ô¶¯Ö´ÐÐ.\n"
-"\n"
-"¼ÌÐøÂð?"
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "×Ô¶¯²½ÖèÅäÖÃ"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Please choose for each step whether it will replay like your install, or it will be manual"
-msgstr "Ñ¡ÔñÒªÖظ´µÄÿһ²½°²×°, ·ñÔòÊÖ¹¤"
-
-#: ../../standalone/drakautoinst_.c:112
-#: ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "¹§Ï²!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"ÈíÅ̳ɹ¦Éú³É.\n"
-"Äã¿ÉÒÔÖظ´°²×°."
-
-#: ../../standalone/drakgw_.c:36
-#: ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "¹²Ïí»¥ÁªÍøÁ¬½Ó"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "»¥ÁªÍøÁ¬½Ó¹²ÏíÏÖÔÚÒѾ­¼¤»î"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"»¥ÁªÍøÁ¬½Ó¹²ÏíµÄÉ趨ÒѾ­Íê³É.\n"
-"Ëüµ±Ç°ÒѾ­±»Æô¶¯.\n"
-"\n"
-"ÄúÒª×öʲô?"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "½ûÖ¹"
-
-#: ../../standalone/drakgw_.c:124
-#: ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "À뿪"
-
-#: ../../standalone/drakgw_.c:124
-#: ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "ÖØÐÂÅäÖÃ"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "Í£Ö¹·þÎñ..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "»¥ÁªÍøÁ¬½Ó¹²ÏíÏÖÔÚ±»½ûÖ¹ÁË"
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "»¥ÁªÍøÁ¬½Ó¹²ÏíÏÖÔÚ±»½ûÖ¹"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"»¥ÁªÍøÁ¬½Ó¹²ÏíµÄÉ趨ÒѾ­Íê³É.\n"
-"Ëüµ±Ç°ÒѾ­±»½ûÖ¹.\n"
-"\n"
-"ÄúÒª×öʲô?"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "Æô¶¯"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "Æô¶¯·þÎñ..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "»¥ÁªÍøÁ¬½Ó¹²ÏíÏÖÔÚÒѾ­¼¤»î"
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN)."
-msgstr ""
-"Äú»¹¿ÉÒÔÅäÖÃÄúµÄµçÄÔ, ÈÃÆäËüµçÄÔ¹²ÏíËüµÄ»¥ÁªÍøÁ¬½Ó.\n"
-"\n"
-"×¢Òâ: ÄúÐèÒªÓоÖÓòÍø(LAN)ʹÓõÄÍø¿¨."
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Íø¿¨ %s (ʹÓà %s Ä£¿é)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "Íø¿¨ %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "ÄúϵͳÖÐûÓÐÍøÂ翨!"
-
-#: ../../standalone/drakgw_.c:218
-msgid "No ethernet network adapter has been detected on your system. Please run the hardware configuration tool."
-msgstr "ÄúµÄϵͳÀïûÓÐÅäÖÃÒÔÌ«Íø¿¨. ÇëÔËÐÐÓ²¼þÅäÖù¤¾ß."
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "ÍøÂç½Ó¿Ú¿¨"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"ÄúµÄϵͳÖÐÖ»ÅäÖÃÁËÒ»¸öÍø¿¨:\n"
-"\n"
-"%s\n"
-"\n"
-"¶ÔÕâ¿éÍø¿¨ÅäÖÃÄúµÄ¾ÖÓòÍø."
-
-#: ../../standalone/drakgw_.c:234
-msgid "Please choose what network adapter will be connected to your Local Area Network."
-msgstr "ÇëÑ¡ÔñÄĸöÍø¿¨½«Á¬½ÓÄúµÄ¾ÖÓòÍø."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Warning, the network adapter is already configured. I will reconfigure it."
-msgstr ""
-"¾¯¸æ, Õâ¸öÍø¿¨ÒѾ­ÅäÖùýÁË.\n"
-"ÒªÖØÐÂÅäÖÃ."
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid ""
-"Potential LAN address conflict found in current config of %s!\n"
-""
-msgstr ""
-"ÔÚµ±Ç°µÄ %s ÅäÖÃÖз¢ÏÖ¿ÉÄÜµÄ LAN µØÖ·³åÍ»! \n"
-""
-
-#: ../../standalone/drakgw_.c:262
-#: ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "·¢ÏÖ·À»ðǽÅäÖÃ!"
-
-#: ../../standalone/drakgw_.c:263
-#: ../../standalone/drakgw_.c:269
-msgid "Warning! An existing firewalling configuration has been detected. You may need some manual fix after installation."
-msgstr ""
-"¾¯¸æ! ·¢ÏÖÔ­À´µÄÅäÖÃÀûÓÃÁË·À»ðǽ¹¦ÄÜ.\n"
-"ÄúÐèÒªÔÚ°²×°Ö®ºóÊÖ¹¤ÐÞ¸Ä."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "ÕýÔÚÅäÖÃ..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "ÕýÔÚÅäÖýű¾, °²×°Èí¼þ, Æô¶¯·þÎñ³ÌÐò ..."
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "°²×° %s Èí¼þ°ü³öÏÖÎÊÌâ"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"ËùÓÐÅäÖö¼Íê³ÉÁË.\n"
-"ÄúÏÖÔÚ¿ÉÒÔÀûÓÃ×Ô¶¯ÍøÂçÉèÖà (DHCP).ÈÃÄúµÄ¾ÖÓòÍøÉÏÆäËüµÄµçÄÔ¹²ÏíÄúµÄ»¥ÁªÍøÁ¬½ÓÁË."
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "ÅäÖÃÒѾ­Íê³É.Ëüµ±Ç°ÒѾ­±»½ûÖ¹."
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "ÅäÖÃÒѾ­Íê³É.Ëüµ±Ç°ÒѾ­±»Æô¶¯."
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "»¥ÁªÍøÁ¬½Ó¹²ÏíûÓÐÅäÖÃ"
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "»¥ÁªÍøÁ¬½Ó¹²ÏíÅäÖÃ"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"»¶Ó­Ê¹Óû¥ÁªÍøÁ¬½Ó¹²ÏíÅäÖÃ!\n"
-"\n"
-"%s\n"
-"\n"
-"µã»÷''ÅäÖÃ''ÔËÐÐÅäÖþ«Áé."
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ÍøÂçÅäÖÃ(%d Íø¿¨)"
-
-#: ../../standalone/draknet_.c:86
-#: ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profile: "
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "ɾ³ýprofile..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "Ҫɾ³ýµÄprofile:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "н¨profile..."
-
-#: ../../standalone/draknet_.c:134
-msgid "Name of the profile to create (the new profile is created as a copy of the current one) :"
-msgstr "н¨profileÃû:"
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "Ö÷»úÃû×Ö:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "»¥ÁªÍø·ÃÎÊ"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "ÀàÐÍ: "
-
-#: ../../standalone/draknet_.c:183
-#: ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "Íø¹Ø:"
-
-#: ../../standalone/draknet_.c:183
-#: ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "Íø¿¨:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "״̬:"
-
-#: ../../standalone/draknet_.c:194
-#: ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "Á¬½Ó"
-
-#: ../../standalone/draknet_.c:194
-#: ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "δÁ¬½Ó"
-
-#: ../../standalone/draknet_.c:197
-#: ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "Á¬½Ó..."
-
-#: ../../standalone/draknet_.c:197
-#: ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "¶Ï¿ª..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "ÕýÔÚ³¢ÊÔÁ¬½Ó..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "ÕýÔڶϿªÁ¬½Ó..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"Á¬½Óδ¶Ï¿ª.\n"
-"ÔËÐÐ\n"
-"/etc/sysconfig/network-script/net_cnx_down\n"
-"¶Ï¿ªÁ¬½Ó."
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "ÄúÏÖÔÚûÓÐÁ¬½Óµ½»¥ÁªÍø"
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "É趨ÒòÌØÍø·ÃÎÊ·þÎñ"
-
-#: ../../standalone/draknet_.c:250
-#: ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "¾ÖÓòÍøÅäÖÃ"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "Çý¶¯³ÌÐò"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "½Ó¿Ú"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "ЭÒé"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "״̬"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "ÅäÖþÖÓòÍøÂç..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr "µã»÷¸Ã´¦Æô¶¯¾«Áé ->"
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "Ó¦ÓÃ"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "ÇëµÈ´ý...É趨ÅäÖÃ"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"ÄãûÓÐÅäÖúõĽӿÚ.\n"
-"µã»÷ 'ÅäÖÃ' ÏÈÅäÖýӿÚ"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "LAN ÅäÖÃ"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "ÊÊÅäÆ÷ %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "Æô¶¯Ð­Òé"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "¿ª»úʱÆô¶¯"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP¿Í»§¶Ë"
-
-#: ../../standalone/draknet_.c:489
-#: ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "ÏÖÔÚ¼¤»î"
-
-#: ../../standalone/draknet_.c:489
-#: ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "ÏÖÔÚ½ûÖ¹"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"ÄãûÓÐÒòÌØÍøÁª½Ó.\n"
-"µã»÷ 'ÅäÖÃ' ÏȽ¨Á¢Áª½Ó"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "»¥ÁªÍøÁ¬½ÓÅäÖÃ"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "»¥ÁªÍøÁ¬½ÓÅäÖÃ"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "Á¬½ÓÀàÐÍ:"
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "²ÎÊý"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Íø¿¨"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP¿Í»§¶Ë"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "»¶Ó­ÈëÇÖÕß"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "²î"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "¹ý·Ö"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"²»¼ì²é¿ÚÁîµÄ·ÃÎÊ.\n"
-"ÕâÒ»¼¶±ðÓ¦É÷ÖØʹÓÃ. ËüÊÇÄúµÄϵͳʹÓøü¼òµ¥, È»¶øÒ²¸ü´àÈõ:\n"
-"¼ÙÈçÕą̂»úÆ÷½«ÒªºÍÆäËû»úÆ÷ÁªÍø»òÕß½ÓÈ뻥ÁªÍø, ¾ø¶Ô²»Òª²ÉÓÃÕâ¸ö¼¶±ð."
-
-#: ../../standalone/draksec_.c:32
-msgid "Password are now enabled, but use as a networked computer is still not recommended."
-msgstr "ÏÖÔÚ¿ªÆôÁË¿ÚÁÄÜ. µ«ÊÇÈÔ²»½¨ÒéÓÃÓÚÁªÍøµÄµçÄÔ."
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"Õâ¸ö°²È«¼¶±ð±ÈÇ°Ò»¸öûÓжàÉٸĽø, \n"
-"Ö÷ÒªÊÇÓиü¶àµÄÓйذ²È«ÐԵľ¯¸æºÍ¼ìÑé."
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"ÕâÊÇÍƼöËùÓÐ×÷Ϊ¿Í»§Á¬½Ó»¥ÁªÍøµÄµçÄÔ²ÉÓõıê×¼µÄ°²È«¼¶±ð.\n"
-"Ó¦ÓÃÁ˱ØÒªµÄ°²È«¼ì²é´ëÊ©."
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"²ÉÓÃÕâ¸ö°²È«¼¶±ð, Õâ¸öϵͳ¿ÉÒÔÔÚ»¥ÁªÍøÉÏ×÷Ϊ·þÎñÆ÷ÔËÐÐ.\n"
-"ÓÐ×ã¹»µÄ°²È«ÐÔ, ϵͳ¿ÉÒÔÊÊÓ¦×÷Ϊ·þÎñÆ÷½ÓÊÜÀ´×ÔÖÚ¶à¿Í»§µÄÁ¬½Ó."
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"²ÉÓÃµÚ 4 ¼¶°²È«ÌØÐÔ, ²»¹ýÏÖÔÚϵͳÊÇÍêÈ«·â±ÕµÄ.\n"
-"ËùÓа²È«ÌØÐÔ´ïµ½×î´óÏÞ¶È."
-
-#: ../../standalone/draksec_.c:65
-msgid "Security level"
-msgstr "¶¨°²È«¼¶±ð"
-
-#: ../../standalone/draksec_.c:67
-msgid "Use libsafe for servers"
-msgstr "·þÎñÆ÷ʹÓà libsafe"
-
-#: ../../standalone/draksec_.c:68
-msgid "A library which defends against buffer overflow and format string attacks."
-msgstr "·ÀÖ¹»º³åÒç³öºÍ´®¸ñʽ¹¥»÷"
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "É趨°²È«¼¶±ð"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "¿ØÖÆÖÐÐÄ"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Ñ¡ÔñÄúÏëÒªµÄ¹¤¾ß"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid ""
-"usage: keyboarddrake [--expert] [keyboard]\n"
-""
-msgstr ""
-"Ó÷¨: keyboarddrake [--expert] [keyboard]\n"
-""
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "ÔÚ¿ØÖÆ̨ÓÃBackSpace×÷ɾ³ý¼ü"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "»»¹âÅÌ"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"ÇëÔÚÇý¶¯Æ÷ÖвåÈë°²×°¹âÅÌ, È»ºóµã»÷ 'È·¶¨'.\n"
-"Èç¹ûÄúûÓÐÕâÕŹâÅÌ, Çëµã»÷ 'È¡Ïû', ·ÅÆúlive upgrade."
-
-#: ../../standalone/livedrake_.c:34
-msgid ""
-"Unable to start live upgrade !!!\n"
-""
-msgstr ""
-"ÎÞ·¨¿ªÊ¼ live upgrade !!!\n"
-""
-
-#: ../../standalone/mousedrake_.c:58
-msgid ""
-"no serial_usb found\n"
-""
-msgstr ""
-"ÕÒ²»µ½ serial_usb\n"
-""
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "Ä£ÄâÈý¼ü"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "·À»ðǽÅäÖÃ"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "·À»ðǽÅäÖÃ"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"·À»ðǽ\n"
-"\n"
-"ÄãÒѾ­ÅäÖÃÁË·À»ðǽ.\n"
-"µã»÷ ÅäÖà Ð޸Ļòɾ³ý·À»ðǽ"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"·À»ðǽ\n"
-"\n"
-"µã»÷ ÅäÖà ÉèÖÃÒ»±ê×¼·À»ðǽ"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Ñ¡ÔñÓïÑÔ"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Ñ¡Ôñ°²×°Àà±ð"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "̽²âÓ²ÅÌ"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "É趨Êó±ê"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Ñ¡Ôñ¼üÅÌÀàÐÍ"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "°²È«"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "É趨Îļþϵͳ"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "¸ñʽ»¯Ó²ÅÌ·ÖÇø"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Ñ¡ÔñÈí¼þ°ü"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "°²×°ÏµÍ³"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Ôö¼ÓÓû§"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "ÍøÂçÅäÖÃ"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "É趨ºǫ́·þÎñ"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "ÖÆ×÷¿ª»úÈíÅÌ"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "°²×°Òýµ¼³ÌÐò"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "ÅäÖÃ X"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Í˳ö°²×°"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"С·À»ðǽÅäÖÃ\n"
-"\n"
-"ÅäÖÃMandrake¸öÈË·À»ðǽ, ÅäÖÃÇ¿´óרÓ÷À»ðǽ, ²Î¼û MandrakeSecurity ·À»ðǽ."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr "ÄãµÃÑ¡Ôñ¿ª·ÅµÄ·þÎñ, ·À»ðǽ½«¹Ø±Õ²»Ê¹ÓõķþÎñ. ÄãÖ»ÓÐÖØÐÂÔËÐиóÌÐò²ÅÄܸıäÅäÖÃ!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-""
-msgstr ""
-"¿ª·ÅWeb·þÎñ?\n"
-"\n"
-""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-""
-msgstr ""
-"ÔËÐÐÓòÃû·þÎñ?\n"
-"\n"
-""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr "¿ª·Åssh½ÓÈë?"
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-""
-msgstr ""
-"¿ª·Åtelnet·þÎñ?\n"
-""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-""
-msgstr ""
-"¿ª·Åftp·þÎñ?\n"
-""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-""
-msgstr ""
-"ÔËÐÐemail·þÎñÆ÷? Èç¹ûÄãÓà pine, mutt»òÆäËûÃüÁîÐÐemail¿Í»§¶Ë,\n"
-"·¢ËÍemail. Èç¹û²»ÔËÐÐemail·þÎñÆ÷, ·À»ðǽ¹Øµô email ·þÎñ.\n"
-"\n"
-""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-""
-msgstr ""
-"ÄúÔËÐÐPOPºÍIMAP·þÎñ? \n"
-"¸Ã»úÆ÷ÓÃÓÚÍйܷÇWEB»¯µÄemail.\n"
-"\n"
-""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-""
-msgstr ""
-"ÄúºÃÏñÔËÐÐ 2.2ºËÐÄ. ÄúµÄÍøÂ綯̬·ÖÅä IP£¬¶Ô²»¶Ô?\n"
-""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"ÄúµÄ¼ÆËã»úÊÇ·ñÓëÆäËü»úÆ÷ͬ²½Ê±¼ä?\n"
-"ͨ³££¬´óÖÐÐÍ Unix/Linux×é֯ͬ²½¼ÆËã»úµÄʱ¼äÓÃÓÚÈÕÖ¾µÈ.\n"
-"Èç¹ûÄú²»Çå³þ£¬ÄÇÄú¾Í²»ÐèÒª."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-""
-msgstr ""
-"ÅäÖÃÍê³É. ÐÞ¸ÄдÈëÓ²ÅÌ?\n"
-"\n"
-"\n"
-"\n"
-""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid ""
-"Can't open %s: %s\n"
-""
-msgstr ""
-"ÎÞ·¨´ò¿ª %s: %s\n"
-""
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid ""
-"Can't open %s for writing: %s\n"
-""
-msgstr ""
-"ÔÚ´ò¿ª %s дÈëʱ·¢Éú´íÎó: %s\n"
-""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "WebÍøÕ¾/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "ÍøÂç¼ÆËã»ú (¿Í»§¶Ë)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS Îļþ·þÎñÆ÷, SMB Îļþ·þÎñÆ÷, SSH Îļþ·þÎñÆ÷, ´úÀí·þÎñÆ÷"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "°ì¹«"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome¹¤×÷Õ¾"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "ÅäºÏ Palm Pilot, Visor µÈÊÖ³ÖÉ豸µÄ¹¤¾ß "
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "¹¤×÷Õ¾"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "·À»ðǽ/·ÓÉÆ÷"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "ÓòÃûºÍÍøÂçÐÅÏ¢·þÎñ DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc"
-msgstr "°ì¹«³ÌÐò: ×Ö´¦Àí (kword, abiword), µç×Ó±í¸ñ(kspread,gnumeric) pdf ÔĶÁÆ÷, µÈµÈ"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "ÓйØÒôƵµÄ¹¤¾ß: mp3 ºÍ midi ²¥·ÅÆ÷, »ìÒôÆ÷µÈ "
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "ÓÐ¹Ø Linux ºÍ×ÔÓÉÈí¼þµÄÊé¼®ºÍÖ¸ÄÏ"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE¹¤×÷Õ¾"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, µÈ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "¶àýÌå - ÊÓƵ"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Ò»×éÓÃÓÚ Óʼþ, ÐÂÎÅ, Îļþ´«Êä, ÁÄÌìµÄ¹¤¾ß"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Êý¾Ý¿â"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL»ò MySQLÊý¾Ý¿â·þÎñ"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "¼ò»¯ÅäÖõŤ¾ß"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "¶àýÌå - ÉùÒô"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Ó¦Óù¤¾ß"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Îĵµ"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "¿ØÖÆ̨¹¤¾ß"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "PostfixÓʼþ·þÎñ£¬ Inn ÐÂÎÅ×é·þÎñ"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "»¥ÁªÍø¹¤×÷Õ¾"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "¶àýÌ幤×÷Õ¾"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "ÅäÖÃ"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "¸ü¶àµÄͼÐÎ×ÀÃæ (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid "The K Desktop Environment, the basic graphical environment with a collection of accompanying tools"
-msgstr "KDE ×ÀÃæ»·¾³, »ù±¾µÄͼÐλ·¾³ºÍÒ»×éÅäÌ׵Ť¾ß"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "ͼÐλ·¾³"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "¿ª·¢Æ½Ì¨"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "ApacheºÍ Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "ÓÃÓÚ´´½¨ºÍÉÕ¼¹âÅ̵Ť¾ß"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "°ì¹«¹¤×÷Õ¾"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, µÈ"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "ͼÏñ´¦Àí ³ÌÐò Èç Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "CºÍC++¿ª·¢¿â£¬³ÌÐò¼°Í·Îļþ"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "ÍøÂçÎļþ·þÎñÆ÷"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Óʼþ/×é¼þ/ÐÂÎÅ"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "ÓÎÏ·¹¤×÷Õ¾"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "ÊÓƵ²¥·ÅºÍ±à¼­"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "¶àýÌå - ͼÐÎ"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "ÓÎÏ·³ÌÐò: ½Ö»ú, ÆåÅÌ, Õ½ÂÔ µÈµÈ"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news (pine, mutt, tin..) and to browse the Web"
-msgstr "ÉÏÍø¹¤¾ß, ÈçÊÕ·¢µç×ÓÓʼþ¼°ÐÂÎÅ×é (pine, mutt, tin..) , ä¯ÀÀÍøÕ¾."
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "´æµµ£¬·ÂÕ棬¼à¿Ø"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "¸öÈ˲ÆÎñ"
-
-#: ../../share/compssUsers:999
-msgid "A graphical environment with user-friendly set of applications and desktop tools"
-msgstr "Å䱸ÁËÓû§ÓÑÉƵÄÓ¦ÓÃÓë×ÀÃ湤¾ßµÄͼÐÎ×ÀÃæ»·¾³"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "sshµÈЭÒé¿Í»§¶Ë"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "»¥ÁªÍø·ÃÎÊÍø¹Ø"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "ÉùÒôºÍÊÓƵ²¥·Å/±à¼­³ÌÐò"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "ÆäËüͼÐÎ×ÀÃæ"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "±à¼­Æ÷, shell, Îļþ¹¤¾ß, ÖÕ¶Ë"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "ÓÃÓÚ¹ÜÀíÄúµÄ²ÆÎñ, Èç gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "ÓÎÏ·"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "¸öÈËÐÅÏ¢¹ÜÀí"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "¶àýÌå - ÉÕ¼¹âÅÌ"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "¿Æѧ¼ÆË㹤×÷Õ¾"
-
diff --git a/perl-install/share/po/zh_TW.po b/perl-install/share/po/zh_TW.po
deleted file mode 100644
index 3c60df6f6..000000000
--- a/perl-install/share/po/zh_TW.po
+++ /dev/null
@@ -1,8620 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Cheng Yuan-Chung <platin@ms31.hinet.net>, 1999
-# Benny Chuang <ben1981@hotmail.com>, 2001
-# Kenduest Lee <kenduest@cynix.com.tw>, 2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2001-09-21 19:50+0200\n"
-"PO-Revision-Date: 2001-09-23 09:40+CST\n"
-"Last-Translator: Kenduest Lee <kenduest@cynix.com.tw>\n"
-"Language-Team: <zh-l10n@linux.org.tw>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=BIG5\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:231
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:232
-msgid "Use Xinerama extension"
-msgstr "¨Ï¥Î Xinerama ©µ¦ù¯à¤O"
-
-#: ../../Xconfigurator.pm_.c:235
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "¥u¦³³o³]©w³o±i \"%s\" (%s) ¥d"
-
-#: ../../Xconfigurator.pm_.c:238
-msgid "Multi-head configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:239
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Graphic card"
-msgstr "Åã¥Ü¥d"
-
-#: ../../Xconfigurator.pm_.c:248
-msgid "Select a graphic card"
-msgstr "¿ï¨ú±zªºÅã¥Ü¥d"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Choose a X server"
-msgstr "¿ï¨ú¦X¾Aªº X ¦øªAµ{¦¡"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "X server"
-msgstr "X ¦øªAµ{¦¡"
-
-#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
-#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:310
-msgid "Which configuration of XFree do you want to have?"
-msgstr "±z­n¥Î­þ¤@­Ó XFree ³]©w ?"
-
-#: ../../Xconfigurator.pm_.c:321
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"±zªºÅã¥Ü¥d¦³¤ä´© 3D ¥[³t¥\¯à¡A¦ý¬O¥u¯à°÷°t¦X XFree %s ¤~¯à°÷µo´§§@¥Î¡C\n"
-"±zªºÅã¥Ü¥d°t¦X XFree %s ¦b 2D Åã¥Ü¤W·|¦³¤ñ¸û¦nªº®Ä¯à¡C"
-
-#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "±zªºÅã¥Ü¥d·f°t XFree %s ¦³ 3D µwÅé¥[³t¥\¯à¡C"
-
-#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
-#: ../../Xconfigurator.pm_.c:1435
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ¥]§t 3D µwÅé¥[³t¥\¯à"
-
-#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"±zªºÅã¥Ü¥d·f°t XFree %s ¯à°÷±Ò¥Î 3D µwÅé¥[³t¥\¯à¡C\n"
-"¦ý¬O½Ðª`·N¡A³o¬O¹êÅç©Ê½èªº¤ä´©¶µ¥Ø¡A¦Ó¥B¤W¥i¯à·|¦³¤£¹w´Áªº±¡ªp¡C"
-
-#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ·f°t¹êÅç©Ê½è 3D µwÅé¥[³t"
-
-#: ../../Xconfigurator.pm_.c:344
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"±zªºÅã¥Ü¥d·f°t XFree %s ¤~¯à°÷±Ò¥Î 3D µwÅé¥[³t¥\¯à¡A¦ý¬O½Ðª`·N¡A\n"
-"³o¬O¹êÅç©Ê½èªº¤ä´©¶µ¥Ø¡A¦Ó¥B¤W¥i¯à·|¦³¤£¹w´Áªº±¡ªp¡C±zªºÅã¥Ü¥d\n"
-"·f°t XFree %s ¦b 2D Åã¥Ü¤Wªº¤ä´©«×À³¸Ó·|¤ñ¸û¨}¦n¡C"
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (Åã¥Ü¥dÅX°Êµ{¦¡ªº¦w¸Ë)"
-
-#: ../../Xconfigurator.pm_.c:368
-msgid "XFree configuration"
-msgstr "XFree ³]©w"
-
-#: ../../Xconfigurator.pm_.c:434
-msgid "Select the memory size of your graphic card"
-msgstr "³]©wÅã¥Ü¥d¤WªºÃ¸¹Ï°O¾ÐÅé¤j¤p"
-
-#: ../../Xconfigurator.pm_.c:492
-msgid "Choose options for server"
-msgstr "¿ï¨ú X ¦øªAµ{¦¡ªº°Ñ¼Æ"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Choose a monitor"
-msgstr "¿ï¨ú¦X¾Aªº¿Ã¹õ"
-
-#: ../../Xconfigurator.pm_.c:516
-msgid "Monitor"
-msgstr "¿Ã¹õ"
-
-#: ../../Xconfigurator.pm_.c:519
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"³o¨â­Ó°Ñ¼Æ¤D¬O±z¿Ã¹õªº««ª½§ó·sÀW²v¡A¥H¤Î«Ü­«­n\n"
-"ªº¤ô¥­§ó·sÀW²v¡A«eªÌ¬O±z¾ã­Ó¿Ã¹õ¼v¹³§ó·sªº¶g´Á¡A\n"
-"«áªÌ¬O¹q¤lºj±½´yªº³t²v¡C\n"
-"\n"
-"±z¥²¶·¯S§Oª`·N¡A¤£­n³]©w¶W¹L¿Ã¹õÀW¼eÅã¥Ü¯à¤Oªº\n"
-"¼Æ­È¡G¹L°ªªºÀW²v¦³¥i¯à¶Ë®`±zÄ_¶Qªº¿Ã¹õ¡C\n"
-"­Y±z¤£½T©w¿Ã¹õ³W®æªº¸Ü¡A½Ð¿ï¾Ü«O¦u¤@ÂIªº³]©w­È¡C"
-
-#: ../../Xconfigurator.pm_.c:526
-msgid "Horizontal refresh rate"
-msgstr "¤ô¥­§ó·sÀW²v"
-
-#: ../../Xconfigurator.pm_.c:527
-msgid "Vertical refresh rate"
-msgstr "««ª½§ó·sÀW²v"
-
-#: ../../Xconfigurator.pm_.c:564
-msgid "Monitor not configured"
-msgstr "¨S¦³§¹¦¨³]©w¿Ã¹õªº°Ê§@"
-
-#: ../../Xconfigurator.pm_.c:567
-msgid "Graphic card not configured yet"
-msgstr "©|¥¼§¹¦¨Åã¥Ü¥dªº³]©w"
-
-#: ../../Xconfigurator.pm_.c:570
-msgid "Resolutions not chosen yet"
-msgstr "©|¥¼¿ï¨ú­n¨Ï¥Îªº¸ÑªR«×"
-
-#: ../../Xconfigurator.pm_.c:587
-msgid "Do you want to test the configuration?"
-msgstr "±z·Q­n´ú¸Õ±zªº³]©w­È¶Ü ?"
-
-#: ../../Xconfigurator.pm_.c:591
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "ĵ§i¡G¦b³o±i¥d¤W­±§@Åã¥Ü´ú¸Õ®É¥i¯à·|Åý±z¨t²Î°±¤î¦^À³"
-
-#: ../../Xconfigurator.pm_.c:594
-msgid "Test of the configuration"
-msgstr "´ú¸Õ³]©w­È"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"½Ð¸ÕµÛ¥h§ó§ï¤@¨Ç°Ñ¼Æªº³]©w­È"
-
-#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
-msgid "An error has occurred:"
-msgstr "µo¥Í¿ù»~¡G"
-
-#: ../../Xconfigurator.pm_.c:668
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d ¬í¤ºÂ÷¶}"
-
-#: ../../Xconfigurator.pm_.c:679
-msgid "Is this the correct setting?"
-msgstr "³o­Ó³]©w­È¥¿½T¶Ü¡H"
-
-#: ../../Xconfigurator.pm_.c:688
-msgid "An error has occurred, try to change some parameters"
-msgstr "µo¥Í¿ù»~¡A½Ð¸ÕµÛ§ó§ï¤@¨Ç°Ñ¼Æªº³]©w­È"
-
-#: ../../Xconfigurator.pm_.c:759
-msgid "Resolution"
-msgstr "¸ÑªR«×"
-
-#: ../../Xconfigurator.pm_.c:810
-msgid "Choose the resolution and the color depth"
-msgstr "¿ï¨ú¸ÑªR«×¥H¤ÎÃC¦â¼Æ"
-
-#: ../../Xconfigurator.pm_.c:812
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Åã¥Ü¥d: %s"
-
-#: ../../Xconfigurator.pm_.c:813
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 ¦øªAµ{¦¡: %s"
-
-#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
-#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
-msgid "Expert Mode"
-msgstr "±M®a«¬¼Ò¦¡"
-
-#: ../../Xconfigurator.pm_.c:830
-msgid "Show all"
-msgstr "Åã¥Ü¥þ³¡"
-
-#: ../../Xconfigurator.pm_.c:875
-msgid "Resolutions"
-msgstr "¸ÑªR«×"
-
-#: ../../Xconfigurator.pm_.c:1437
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Áä½Lªº§Î¦¡: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1438
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "·Æ¹«ªººØÃþ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1439
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "·Æ¹«³s±µªº¦ì¸m: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1440
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "¿Ã¹õ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1441
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "¿Ã¹õ¤ô¥­§ó·sÀW²v: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1442
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "¿Ã¹õ««ª½§ó·sÀW²v: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1443
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Åã¥Ü¥d: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1444
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Åã¥Ü¥dÃѧO¸ê®Æ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1445
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "ø¹Ï°O¾ÐÅé: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1447
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "ÃC¦â²`«×: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1448
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "¸ÑªR«×: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1450
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 ¦øªAµ{¦¡: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1451
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ÅX°Êµ{¦¡: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1469
-msgid "Preparing X-Window configuration"
-msgstr "¥¿¦b·Ç³Æ X-Window ªº³]©w"
-
-#: ../../Xconfigurator.pm_.c:1489
-msgid "What do you want to do?"
-msgstr "±z¥´ºâ«ç»ò§@ ?"
-
-#: ../../Xconfigurator.pm_.c:1494
-msgid "Change Monitor"
-msgstr "§ïÅܿùõ³]©w"
-
-#: ../../Xconfigurator.pm_.c:1495
-msgid "Change Graphic card"
-msgstr "§ïÅÜÅã¥Ü¥d³]©w"
-
-#: ../../Xconfigurator.pm_.c:1497
-msgid "Change Server options"
-msgstr "§ïÅܦøªAµ{¦¡ªº°Ñ¼Æ³]©w"
-
-#: ../../Xconfigurator.pm_.c:1498
-msgid "Change Resolution"
-msgstr "§ïÅܸѪR«×³]©w"
-
-#: ../../Xconfigurator.pm_.c:1499
-msgid "Show information"
-msgstr "Åã¥Ü©Ò¦³¸ê°T"
-
-#: ../../Xconfigurator.pm_.c:1500
-msgid "Test again"
-msgstr "¦A¦¸´ú¸Õ³]©w­È"
-
-#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
-msgid "Quit"
-msgstr "µ²§ô"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Àx¦s¥Ø«eªºÅܧó¡H\n"
-"¥Ø«eªº²ÕºA¬O:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1532
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "½Ð­«·sµn¤J %s ¥H±Ò°Ê­×§ï¹Lªº³]©w­È"
-
-#: ../../Xconfigurator.pm_.c:1552
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "½Ðµn¥X¡AµM«á¥Î Ctrl-Alt-BackSpace ­«·s±Ò°Ê X"
-
-#: ../../Xconfigurator.pm_.c:1555
-msgid "X at startup"
-msgstr "¶}¾÷®É±Ò°Ê X Àô¹Ò"
-
-#: ../../Xconfigurator.pm_.c:1556
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"µ{¦¡¥i¥HÀ°±z³]©w¦b¶}¾÷®É¦Û°Ê¶i¤J X Àô¹Ò¡A\n"
-"±z§Æ±æ¦b­«·s¶}¾÷¥H«á´N¦Û°Ê¶i¤J X Àô¹Ò¶Ü ?"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ¦â (8 ¦ì¤¸)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "3 ¸U 2 ¤d¦â (15 ¦ì¤¸)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "6 ¸U 5 ¤d¦â (16 ¦ì¤¸)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "1 ¤d 6 ¦Ê¸U¦â (24 ¦ì¤¸)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 »õ¦â (32 ¦ì¤¸)"
-
-#: ../../Xconfigurator_consts.pm_.c:106
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:107
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:108
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:109
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:110
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:111
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:112
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "64 MB or more"
-msgstr "16 MB ©ÎªÌ§ó¦h"
-
-#: ../../Xconfigurator_consts.pm_.c:122
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:123
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 at 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:124
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:125
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:126
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:127
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:128
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 at 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency that can do 1280x1024 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency that can do 1280x1024 at 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency that can do 1280x1024 at 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor that can do 1600x1200 at 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor that can do 1600x1200 at 76 Hz"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121
-msgid "First sector of boot partition"
-msgstr "¶}¾÷¤À³Î°Ïªº²Ä¤@­ÓºÏ­y"
-
-#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
-msgid "First sector of drive (MBR)"
-msgstr "µwºÐªº²Ä¤@­ÓºÏ­y (MBR)"
-
-#: ../../any.pm_.c:100
-msgid "SILO Installation"
-msgstr "¦w¸Ë SILO"
-
-#: ../../any.pm_.c:101 ../../any.pm_.c:114
-msgid "Where do you want to install the bootloader?"
-msgstr "±z­n±N¶}¾÷µ{¦¡¦w¸Ë¦b¨º­Ó¦ì¸m ?"
-
-#: ../../any.pm_.c:113
-msgid "LILO/grub Installation"
-msgstr "¦w¸Ë LILO ©Î grub"
-
-#: ../../any.pm_.c:125 ../../any.pm_.c:139
-msgid "SILO"
-msgstr "SLILO"
-
-#: ../../any.pm_.c:127
-msgid "LILO with text menu"
-msgstr "¤å¦r¿ï³æªº LILO ¶}¾÷µ{¦¡"
-
-#: ../../any.pm_.c:128 ../../any.pm_.c:139
-msgid "LILO with graphical menu"
-msgstr "¹Ï§Î¤¶­±ªº LILO ¶}¾÷µ{¦¡"
-
-#: ../../any.pm_.c:131
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:135
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "¨Ï¥Î loadlin µ{¦¡¥Ñ DOS/Windows ¶}¾÷±Ò°Ê"
-
-#: ../../any.pm_.c:137 ../../any.pm_.c:139
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:177
-msgid "Bootloader main options"
-msgstr "¶}¾÷µ{¦¡¥D­n¿ï¶µ"
-
-#: ../../any.pm_.c:146 ../../any.pm_.c:178
-msgid "Bootloader to use"
-msgstr "­n¨Ï¥Î¨º­Ó¶}¾÷µ{¦¡"
-
-#: ../../any.pm_.c:148
-msgid "Bootloader installation"
-msgstr "¦w¸Ë¶}¾÷µ{¦¡"
-
-#: ../../any.pm_.c:150 ../../any.pm_.c:180
-msgid "Boot device"
-msgstr "¶}¾÷¸Ë¸m"
-
-#: ../../any.pm_.c:151
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA ¼Ò¦¡(¬Y¨Ç«¬ BIOS ¤WµLªk¨Ï¥Î)"
-
-#: ../../any.pm_.c:152
-msgid "Compact"
-msgstr "ºò±K¼Ò¦¡"
-
-#: ../../any.pm_.c:152
-msgid "compact"
-msgstr "ºò±K¼Ò¦¡"
-
-#: ../../any.pm_.c:153 ../../any.pm_.c:250
-msgid "Video mode"
-msgstr "Åã¥Ü¼Ò¦¡"
-
-#: ../../any.pm_.c:155
-msgid "Delay before booting default image"
-msgstr "¦b±Ò°Ê§@·~¨t²Î«e¥ý©µ¿ðªº®É¶¡"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:730
-#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
-#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
-#: ../../standalone/draknet_.c:603
-msgid "Password"
-msgstr "±K½X"
-
-#: ../../any.pm_.c:158 ../../any.pm_.c:731
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Password (again)"
-msgstr "±K½X½T»{"
-
-#: ../../any.pm_.c:159
-msgid "Restrict command line options"
-msgstr "­­¨î¦b boot: «ü¥O¦æ¿é¤J°Ñ¼Æ"
-
-#: ../../any.pm_.c:159
-msgid "restrict"
-msgstr "­­¨î°Ñ¼Æ"
-
-#: ../../any.pm_.c:161
-msgid "Clean /tmp at each boot"
-msgstr "¨C¦¸¶}¾÷®É¦Û°Ê²M²z /tmp ¥Ø¿ý"
-
-#: ../../any.pm_.c:162
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "»Ý­nªº¸Ü¡A¿é¤J¥¿½Tªº°O¾ÐÅé¤j¤p (§ä¨ì %d MB)"
-
-#: ../../any.pm_.c:164
-msgid "Enable multi profiles"
-msgstr "¨Ï¥Î¦h­«³]©wÀÉ"
-
-#: ../../any.pm_.c:168
-msgid "Give the ram size in MB"
-msgstr "¿é¤J°O¾ÐÅé¤j¤p (¥H MB ¬°³æ¦ì)"
-
-#: ../../any.pm_.c:170
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "¿ï¶µ \"­­¨î«ü¥O¦æ°Ñ¼Æ\" ¦b¨S¦³³]©w±K½Xªº±¡ªp¤U·|¥¢®Ä"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "Please try again"
-msgstr "½Ð¦A¸Õ¤@¦¸"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:707
-#: ../../install_steps_interactive.pm_.c:933
-msgid "The passwords do not match"
-msgstr "¿é¤Jªº±K½X¤£²Å¦X"
-
-#: ../../any.pm_.c:179
-msgid "Init Message"
-msgstr "±Ò°Ê°T®§"
-
-#: ../../any.pm_.c:181
-msgid "Open Firmware Delay"
-msgstr "¶}±Ò Firmware Delay"
-
-#: ../../any.pm_.c:182
-msgid "Kernel Boot Timeout"
-msgstr "®Ö¤ß±Ò°Ê®É¶¡¹O®É®É¶¡"
-
-#: ../../any.pm_.c:183
-msgid "Enable CD Boot?"
-msgstr "¤¹³\ CD ¶}¾÷¡H"
-
-#: ../../any.pm_.c:184
-msgid "Enable OF Boot?"
-msgstr "¤¹³\ OF ¶}¾÷ ¡H"
-
-#: ../../any.pm_.c:185
-msgid "Default OS?"
-msgstr "¹w³] OS ?"
-
-#: ../../any.pm_.c:207
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"¤U­±ÁÙ¦³¤@¨Ç¨ä¥Lªº¿ï¶µ¡A±z¥i¥H¿ï¾Ü·s¼W©Î\n"
-"­×§ï¬J¦³ªº¿ï¶µ¡C"
-
-#: ../../any.pm_.c:217
-msgid "Add"
-msgstr "·s¼W"
-
-#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
-#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
-#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
-#: ../../printerdrake.pm_.c:1948
-msgid "Done"
-msgstr "§¹¦¨"
-
-#: ../../any.pm_.c:217
-msgid "Modify"
-msgstr "­×§ï"
-
-#: ../../any.pm_.c:225
-msgid "Which type of entry do you want to add?"
-msgstr "±z­n·s¼W­þ¤@Ãþªº¶µ¥Ø ?"
-
-#: ../../any.pm_.c:226
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:226
-msgid "Other OS (SunOS...)"
-msgstr "¨ä¥L§@·~¨t²Î (SunOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (MacOS...)"
-msgstr "¨ä¥L§@·~¨t²Î (MacOS...)"
-
-#: ../../any.pm_.c:227
-msgid "Other OS (windows...)"
-msgstr "¨ä¥L§@·~¨t²Î (windows...)"
-
-#: ../../any.pm_.c:246
-msgid "Image"
-msgstr "®Ö¤ß"
-
-#: ../../any.pm_.c:247 ../../any.pm_.c:258
-msgid "Root"
-msgstr "/ ¤À³Î°Ï"
-
-#: ../../any.pm_.c:248 ../../any.pm_.c:277
-msgid "Append"
-msgstr "ªþ¥[°Ñ¼Æ"
-
-#: ../../any.pm_.c:252
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:253
-msgid "Read-write"
-msgstr "/ ¥iŪ¼g"
-
-#: ../../any.pm_.c:260
-msgid "Table"
-msgstr "¤À³Îªí"
-
-#: ../../any.pm_.c:261
-msgid "Unsafe"
-msgstr "¸Ñ°£ºÏºÐÀˬd"
-
-#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
-msgid "Label"
-msgstr "¼ÐÅÒ"
-
-#: ../../any.pm_.c:270 ../../any.pm_.c:281
-msgid "Default"
-msgstr "¹w³]¶}¾÷"
-
-#: ../../any.pm_.c:278
-msgid "Initrd-size"
-msgstr "Initrd-size"
-
-#: ../../any.pm_.c:280
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:288
-msgid "Remove entry"
-msgstr "²¾°£¶µ¥Ø"
-
-#: ../../any.pm_.c:291
-msgid "Empty label not allowed"
-msgstr "¼ÐÅÒ¤£¥i¥HªÅ¥Õ"
-
-#: ../../any.pm_.c:292
-msgid "This label is already used"
-msgstr "³o­Ó¼ÐÅÒ¤w¸g¥Î¹L¤F"
-
-#: ../../any.pm_.c:597
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "§ä¨ì %s %s ¤¶­±"
-
-#: ../../any.pm_.c:598
-msgid "Do you have another one?"
-msgstr "±zÁÙ¦³¨ä¥Lªº¶Ü?"
-
-#: ../../any.pm_.c:599
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "¨t²Î¤W¬O§_¦³¥ô¦ó %s ¤¶­±?"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "No"
-msgstr "§_"
-
-#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
-#: ../../my_gtk.pm_.c:715
-msgid "Yes"
-msgstr "¬Oªº"
-
-#: ../../any.pm_.c:602
-msgid "See hardware info"
-msgstr "À˵øµwÅé¸ê°T"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:637
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "¥¿¦b¦w¸Ë %s ¥d %s ªºÅX°Êµ{¦¡"
-
-#: ../../any.pm_.c:638
-#, c-format
-msgid "(module %s)"
-msgstr "(¼Ò²Õ %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:649
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "§ÚÀ³¸Ó¸Õ¨º­Ó %s ÅX°Êµ{¦¡©O?"
-
-#: ../../any.pm_.c:657
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"ÁöµM¤j³¡¤À®É­Ô¤£»Ý­nÃB¥~ªº°Ñ¼Æ¡A¥i¬O¦³¨Ç®É­Ô %s ªºÅX°Ê\n"
-"µ{¦¡»Ý­n¥[¤W¤@¨Ç°Ñ¼Æ¤~¯à¥¿±`¹B§@¡F±z­n«ü©wÃB¥~ªº°Ñ¼Æµ¹\n"
-"ÅX°Êµ{¦¡¡AÁÙ¬OÅýµ{¦¡¦Û¦æ°»´úµwÅé³]©w©O? ¦³®É­Ô¦Û°Ê°»´ú\n"
-"·|Åý¹q¸£·í¾÷¡A¤£¹LÀ³¸Ó¤£¦Ü©ó³y¦¨¥ô¦ó¶Ë®`¤~¹ï¡C"
-
-#: ../../any.pm_.c:662
-msgid "Autoprobe"
-msgstr "¦Û°Ê°»´ú"
-
-#: ../../any.pm_.c:662
-msgid "Specify options"
-msgstr "«ü©w°Ñ¼Æ"
-
-#: ../../any.pm_.c:666
-#, c-format
-msgid "You may now provide its options to module %s."
-msgstr "±z²{¦b¥i¥H¿é¤J­nµ¹ %s ¼Ò²Õ¨Ï¥Îªº°Ñ¼Æ¡C"
-
-#: ../../any.pm_.c:672
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"±z²{¦b¥i¥H¿é¤J­nµ¹ %s ¼Ò²Õ¨Ï¥Îªº°Ñ¼Æ¡C\n"
-"°Ñ¼Æªº®æ¦¡¬° \"name=value name2=value2 ...\"\n"
-"¨Ò¦p \"io=0x300 irq=7\""
-
-#: ../../any.pm_.c:675
-msgid "Module options:"
-msgstr "¼Ò²Õ°Ñ¼Æ¡G"
-
-#: ../../any.pm_.c:686
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"¸ü¤J %s ¼Ò²Õ¥¢±Ñ¡A\n"
-"±z­n¥Î¨ä¥L°Ñ¼Æ¦A¸Õ¤@¦¸¶Ü?"
-
-#: ../../any.pm_.c:704
-#, c-format
-msgid "(already added %s)"
-msgstr "( %s ¤w¸g¥[¤J)"
-
-#: ../../any.pm_.c:708
-msgid "This password is too simple"
-msgstr "¿é¤Jªº±K½X¤Ó²³æ¤F"
-
-#: ../../any.pm_.c:709
-msgid "Please give a user name"
-msgstr "½Ð¿é¤J¨Ï¥ÎªÌ±b¸¹"
-
-#: ../../any.pm_.c:710
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "¨Ï¥ÎªÌ±b¸¹¥u¯à§t¦³¤p¼g­^¤å¦r¥À¡B¼Æ¦r¡B `-' ©Î `_'"
-
-#: ../../any.pm_.c:711
-msgid "This user name is already added"
-msgstr "³o­Ó¨Ï¥ÎªÌ¤w¸g¦s¦b¤F"
-
-#: ../../any.pm_.c:715
-msgid "Add user"
-msgstr "·s¼W¨Ï¥ÎªÌ"
-
-#: ../../any.pm_.c:716
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"¿é¤J¤@¦ì¨Ï¥ÎªÌ±b¸¹\n"
-"%s"
-
-#: ../../any.pm_.c:717
-msgid "Accept user"
-msgstr "±µ¨ü¨Ï¥ÎªÌ"
-
-#: ../../any.pm_.c:728
-msgid "Real name"
-msgstr "¯u¹ê¦WºÙ"
-
-#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
-#: ../../printerdrake.pm_.c:480
-msgid "User name"
-msgstr "¨Ï¥ÎªÌ±b¸¹"
-
-#: ../../any.pm_.c:732
-msgid "Shell"
-msgstr "Shell µ{¦¡"
-
-#: ../../any.pm_.c:734
-msgid "Icon"
-msgstr "¹Ï¥Ü"
-
-#: ../../any.pm_.c:756
-msgid "Autologin"
-msgstr "¦Û°Êµn¤J"
-
-#: ../../any.pm_.c:757
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"²{¦b¯à°÷³]©w©ó¶}¾÷«á¦Û°Ê¥H¬Y­Ó¨Ï¥ÎªÌ¨­¥÷µn¤J¨t²Î¡C\n"
-"±z­n¨Ï¥Î³o­Ó¥\¯à¶Ü¡H"
-
-#: ../../any.pm_.c:761
-msgid "Choose the default user:"
-msgstr "½Ð¿ï¨ú¹w³]ªº¨Ï¥ÎªÌ:"
-
-#: ../../any.pm_.c:762
-msgid "Choose the window manager to run:"
-msgstr "¿ï¨ú±z·Q¨Ï¥Îªºµøµ¡ºÞ²zµ{¦¡"
-
-#: ../../any.pm_.c:771
-msgid "Please, choose a language to use."
-msgstr "½Ð¿ï¾Ü­n¨Ï¥Î¨º­Ó»y¨t¡C"
-
-#: ../../any.pm_.c:773
-msgid "You can choose other languages that will be available after install"
-msgstr "±z¥i¥H¿ï¾Ü¦b¦w¸Ë§¹¦¨¥H«á¨Ï¥Î¨ä¥Lªº»y¨¥"
-
-#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
-msgid "All"
-msgstr "©Ò¦³"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:259
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:835
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:838
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:841
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:844
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:847
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
-
-#: ../../bootloader.pm_.c:851
-msgid "not enough room in /boot"
-msgstr "/boot ¨S¦³¨¬°÷ªºªÅ¶¡"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:951
-msgid "Desktop"
-msgstr "®à­±"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:953
-msgid "Start Menu"
-msgstr "¶}©l¥\¯àªí"
-
-#: ../../bootloader.pm_.c:972
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "±z¤£¯à§â¶}¾÷ºÞ²zµ{¦¡¦w¸Ë¦b %s ¤À³Î°Ï¤W\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ÁÙ¨S¦³¹ê§@¨D§U¥\¯à\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "¶}¾÷¼Ë¦¡²ÕºA³]©w"
-
-#: ../../bootlook.pm_.c:79
-msgid "/_File"
-msgstr "_File"
-
-#: ../../bootlook.pm_.c:80
-msgid "/File/_Quit"
-msgstr "File/_Quit"
-
-#: ../../bootlook.pm_.c:80
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Categorizing Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Traditional Monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Traditional Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "¶}¾÷®É±Ò°Ê Aurora GUI µ{¦¡"
-
-#: ../../bootlook.pm_.c:100
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub ¼Ò¦¡"
-
-#: ../../bootlook.pm_.c:102
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"§A¥Ø«e¬O¿ï¥Î %s ·í§@±z¥Ø«eªº¶}¾÷ºÞ²zµ{¦¡¡C\n"
-"±z¥i¥HÂI¿ï³]©w¨Ó±Ò°Ê³]©wºëÆF¡C"
-
-#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
-#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
-msgid "Configure"
-msgstr "³]©w"
-
-#: ../../bootlook.pm_.c:108
-msgid "Boot mode"
-msgstr "¶}¾÷¼Ò¦¡"
-
-#: ../../bootlook.pm_.c:136
-msgid "System mode"
-msgstr "¨t²Î¼Ò¦¡"
-
-#: ../../bootlook.pm_.c:138
-msgid "Launch the X-Window system at start"
-msgstr "¶}¾÷®É±Ò°Ê X Window ¨t²ÎÀô¹Ò"
-
-#: ../../bootlook.pm_.c:143
-msgid "No, I don't want autologin"
-msgstr "¤£¡A§Ú¤£»Ý­n autologin"
-
-#: ../../bootlook.pm_.c:145
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "¬Oªº¡A§Ú»Ý­n¥Î³o­Ó (¨Ï¥ÎªÌ¡B®à­±) ¨Ó¦Û°Êµn¤J"
-
-#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
-#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
-#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
-#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
-#: ../../standalone/draknet_.c:644
-msgid "OK"
-msgstr "½T©w"
-
-#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
-#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
-#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
-#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
-#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
-#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
-#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
-#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
-msgid "Cancel"
-msgstr "¨ú®ø"
-
-#: ../../bootlook.pm_.c:224
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "µLªk¶}±Ò /etc/inittab Àɮ׶i¦æŪ¨ú: %s"
-
-#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
-msgid "Installation of LILO failed. The following error occured:"
-msgstr "¶}¾÷µ{¦¡ LILO ¦w¸Ë¥¢±Ñ¡Aµo¥Í¦p¤U¤§¿ù»~¡G"
-
-#: ../../common.pm_.c:93
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:93
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
-#: ../../install_steps_graphical.pm_.c:334
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:101
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:109
-#, c-format
-msgid "%d minutes"
-msgstr "%d ¤ÀÄÁ"
-
-#: ../../common.pm_.c:111
-msgid "1 minute"
-msgstr "1 ¤ÀÄÁ"
-
-#: ../../common.pm_.c:113
-#, c-format
-msgid "%d seconds"
-msgstr "%d ’"
-
-#: ../../diskdrake.pm_.c:100
-msgid "Please make a backup of your data first"
-msgstr "½Ð±z¥ý³Æ¥÷±zªº¸ê®Æ"
-
-#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
-#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
-msgid "Read carefully!"
-msgstr "½Ð¸Ô²Ó¾\Ū!"
-
-#: ../../diskdrake.pm_.c:103
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"¦pªG§A¥´ºâ¨Ï¥Î aboot µ{¦¡ªº¸Ü¡A½Ðª`·N±z¦Ü¤Ö»Ý­n¦b©óºÏºÐ³Ì«eºÝ«O¯d¤@¶ô¥i¥ÎªºªÅ"
-"¶¡ (2048 ºÏ°Ï´N¨¬°÷¤F)¡C"
-
-#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
-#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
-#: ../../install_steps_interactive.pm_.c:37
-#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
-msgid "Error"
-msgstr "¿ù»~"
-
-#: ../../diskdrake.pm_.c:159
-msgid "Wizard"
-msgstr "ºëÆF"
-
-#: ../../diskdrake.pm_.c:181
-msgid "New"
-msgstr "·sªº"
-
-#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
-msgid "Remote"
-msgstr "»·ºÝ"
-
-#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
-#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
-msgid "Mount point"
-msgstr "±¾¸üÂI"
-
-#: ../../diskdrake.pm_.c:209
-msgid "Options"
-msgstr "¿ï¶µ"
-
-#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
-#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
-#: ../../diskdrake_interactive.pm_.c:488
-msgid "Type"
-msgstr "®æ¦¡"
-
-#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
-msgid "Unmount"
-msgstr "¨ø¸ü"
-
-#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
-msgid "Mount"
-msgstr "±¾¸ü"
-
-#: ../../diskdrake.pm_.c:228
-msgid "Choose action"
-msgstr "¿ï¾Ü°Ê§@"
-
-#: ../../diskdrake.pm_.c:235
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"±z¦³¤@­Ó«Ü¤jªº fat ¤À³Î°Ï (MicroSoft ªº\n"
-"Dos/Windows §@·~¨t²Î¥Îªº®æ¦¡)¡A«Øij±z­«\n"
-"³]³o­Ó¤À³Î°Ïªº¤j¤p (ÂI¿ï³o­Ó¤À³Î°Ï¡AµM\n"
-"«á«ö \"§ïÅܤj¤p\" )"
-
-#: ../../diskdrake.pm_.c:238
-msgid "Please click on a partition"
-msgstr "½ÐÂI¿ï¤@­Ó¤À³Î°Ï"
-
-#: ../../diskdrake.pm_.c:240
-msgid "Please click on a media"
-msgstr "½ÐÂI¿ï¤@­ÓºÏºÐ"
-
-#: ../../diskdrake.pm_.c:243
-msgid ""
-"Please click on a button above\n"
-"\n"
-"Or use \"New\""
-msgstr ""
-"½ÐÂI¿ï¤W­±ªº«ö¶s\n"
-"\n"
-"©ÎªÌ¬O¨Ï¥Î \"·s¼W\""
-
-#: ../../diskdrake.pm_.c:244
-msgid "Use \"New\""
-msgstr "¨Ï¥Î \"·s¼W\""
-
-#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
-msgid "Details"
-msgstr "¸Ô²Ó¸ê°T"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake.pm_.c:395
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake.pm_.c:395
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Journalised FS"
-msgstr "¤é»x¦¡Àɮרt²Î"
-
-#: ../../diskdrake.pm_.c:395
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake.pm_.c:395
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
-msgid "Empty"
-msgstr "Empty"
-
-#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
-#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
-#: ../../services.pm_.c:161
-msgid "Other"
-msgstr "Other"
-
-#: ../../diskdrake.pm_.c:400
-msgid "Filesystem types:"
-msgstr "Àɮרt²Î®æ¦¡¡G"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
-msgid "Create"
-msgstr "·s«Ø"
-
-#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "¥Î ``%s'' ¥N´À"
-
-#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
-msgid "Delete"
-msgstr "§R°£"
-
-#: ../../diskdrake.pm_.c:423
-msgid "Use ``Unmount'' first"
-msgstr "­n¥ý ``Unmount''"
-
-#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "§ïÅܤÀ³Î°Ï %s ªº®æ¦¡¥H«á¡A©Ò¦³¦b³o­Ó¤À³Î°Ï¤Wªº¸ê®Æ³£·|³Q²M°£"
-
-#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "±z­n§â³o­Ó¸Ë¸m %s ±¾¸ü¦b¨º¸Ì ?"
-
-#: ../../diskdrake.pm_.c:500
-msgid "Mount options"
-msgstr "±¾¸ü°Ñ¼Æ"
-
-#: ../../diskdrake.pm_.c:507
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake.pm_.c:525
-msgid "Removable media"
-msgstr "©â¨ú¦¡¸Ë¸m"
-
-#: ../../diskdrake.pm_.c:532
-msgid "Change type"
-msgstr "§ïÅܤÀ³Î°Ï®æ¦¡"
-
-#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
-msgid "Which filesystem do you want?"
-msgstr "±z­n¥Î¨º¤@ºØÀɮרt²Î¡H"
-
-#: ../../diskdrake.pm_.c:564
-msgid "Scanning available nfs shared resource"
-msgstr "¥¿¦b±½´y¥i¨Ï¥Îªº NFS ¸ê·½¤À¨É¶µ¥Ø"
-
-#: ../../diskdrake.pm_.c:569
-#, c-format
-msgid "Scanning available nfs shared resource of server %s"
-msgstr "¥¿¦b¹ï %s ±½´y¥i¨Ï¥Îªº NFS ¸ê·½¤À¨É¶µ¥Ø"
-
-#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
-msgid "If the list above doesn't contain the wanted entry, enter it here:"
-msgstr "¦pªG²M³æ¤W¨Ã¨S¦³¥]§t©Ò»Ý­nªº¶µ¥Ø¡A±z¥i¥H©ó³oÃä¦Û¦æ¿é¤J:"
-
-#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
-msgid "Server"
-msgstr "Server µ{¦¡"
-
-#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
-msgid "Shared resource"
-msgstr "¥i¤À¨Éªº¸ê·½¶µ¥Ø"
-
-#: ../../diskdrake.pm_.c:615
-msgid "Scanning available samba shared resource"
-msgstr "¥¿¦b±½´y¥i¨Ï¥Îªº samba ¸ê·½¤À¨É¶µ¥Ø"
-
-#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
-#, c-format
-msgid "Scanning available samba shared resource of server %s"
-msgstr "¥¿¦b¹ï %s ±½´y¥i¨Ï¥Îªº samba ¸ê·½¤À¨É¶µ¥Ø"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose a partition"
-msgstr "¿ï¾Ü¤À³Î°Ï"
-
-#: ../../diskdrake_interactive.pm_.c:163
-msgid "Choose another partition"
-msgstr "¿ï¾Ü¥t¤@­Ó¤À³Î°Ï"
-
-#: ../../diskdrake_interactive.pm_.c:188
-msgid "Exit"
-msgstr "Â÷¶}"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to expert mode"
-msgstr "¤Á´«¨ì±M®a¼Ò¦¡"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Toggle to normal mode"
-msgstr "¤Á´«¨ì¤@¯ë¼Ò¦¡"
-
-#: ../../diskdrake_interactive.pm_.c:210
-msgid "Undo"
-msgstr "´_­ì"
-
-#: ../../diskdrake_interactive.pm_.c:229
-msgid "Continue anyway?"
-msgstr "¤£ºÞ¦p¦ó³£­nÄ~Äò¶Ü ?"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without saving"
-msgstr "¤£Àx¦s´NÂ÷¶}"
-
-#: ../../diskdrake_interactive.pm_.c:234
-msgid "Quit without writing the partition table?"
-msgstr "±z·Ç³Æ¤£¼g¤JµwºÐ¤À³Îªí´NÂ÷¶} ?"
-
-#: ../../diskdrake_interactive.pm_.c:237
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "±z·Q­nÀx¦s /etc/fstab Àɮתº­×§ï¶Ü¡H"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Auto allocate"
-msgstr "¦Û°Ê¤À°t"
-
-#: ../../diskdrake_interactive.pm_.c:247
-msgid "Clear all"
-msgstr "¥þ³¡²M°£"
-
-#: ../../diskdrake_interactive.pm_.c:247
-#: ../../install_steps_interactive.pm_.c:171
-msgid "More"
-msgstr "§ó¦h"
-
-#: ../../diskdrake_interactive.pm_.c:250
-msgid "Hard drive information"
-msgstr "µwºÐ¸ê°T"
-
-#: ../../diskdrake_interactive.pm_.c:267
-msgid "Not enough space for auto-allocating"
-msgstr "¨S¦³¨¬°÷ªºªÅ¶¡¯à°÷¦Û°Ê°t¸m"
-
-#: ../../diskdrake_interactive.pm_.c:273
-msgid "All primary partitions are used"
-msgstr "¥D¤À³Î°Ï¼Æ¥Ø¤w¸gº¡¤F"
-
-#: ../../diskdrake_interactive.pm_.c:274
-msgid "I can't add any more partition"
-msgstr "µ{¦¡µLªk¦A·s¼W¥ô¦ó¤À³Î°Ï¤F"
-
-#: ../../diskdrake_interactive.pm_.c:275
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "»Ý­n¦³§ó¦hªº¤À³Î°Ïªº¸Ü¡A½Ð§R°£¤@­Ó¥D¤À³Î°Ï¥H«Ø¥ß©µ¦ù¤À³Î°Ï"
-
-#: ../../diskdrake_interactive.pm_.c:285
-msgid "Save partition table"
-msgstr "¼g¤JµwºÐ¤À³Îªí"
-
-#: ../../diskdrake_interactive.pm_.c:286
-msgid "Restore partition table"
-msgstr "¦^¦sµwºÐ¤À³Îªí"
-
-#: ../../diskdrake_interactive.pm_.c:287
-msgid "Rescue partition table"
-msgstr "·m±ÏµwºÐ¤À³Îªí"
-
-#: ../../diskdrake_interactive.pm_.c:289
-msgid "Reload partition table"
-msgstr "¸ü¤JµwºÐ¤À³Îªí"
-
-#: ../../diskdrake_interactive.pm_.c:293
-msgid "Removable media automounting"
-msgstr "©â¨ú¦¡¸Ë¸m¦Û°Ê±¾¸ü"
-
-#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
-msgid "Select file"
-msgstr "¿ï¾ÜÀÉ®×"
-
-#: ../../diskdrake_interactive.pm_.c:308
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"³Æ¥÷ªºµwºÐ¤À³Îªí¦³¤£¤@¼Ëªº¤j¤p\n"
-"ÁÙ­nÄ~Äò ?"
-
-#: ../../diskdrake_interactive.pm_.c:322
-msgid "Warning"
-msgstr "ĵ§i"
-
-#: ../../diskdrake_interactive.pm_.c:323
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"´¡¤J³nºÐ¤ù\n"
-"©Ò¦³¦b³o¤ù³nºÐ¤¤ªº¸ê®Æ³£±N³Q²M°£"
-
-#: ../../diskdrake_interactive.pm_.c:334
-msgid "Trying to rescue partition table"
-msgstr "¥¿¦b¸Õ¹Ï±Ï¦^µwºÐ¤À³Îªí"
-
-#: ../../diskdrake_interactive.pm_.c:340
-msgid "Detailed information"
-msgstr "¸Ô²Ó¸ê°T"
-
-#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
-msgid "Resize"
-msgstr "§ïÅܤj¤p"
-
-#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
-msgid "Move"
-msgstr "²¾°Ê"
-
-#: ../../diskdrake_interactive.pm_.c:356
-msgid "Format"
-msgstr "®æ¦¡¤Æ"
-
-#: ../../diskdrake_interactive.pm_.c:358
-msgid "Active"
-msgstr "±Ò°Ê"
-
-#: ../../diskdrake_interactive.pm_.c:359
-msgid "Add to RAID"
-msgstr "¥[¤JºÏºÐ°}¦C"
-
-#: ../../diskdrake_interactive.pm_.c:360
-msgid "Add to LVM"
-msgstr "¥[¤JºÏºÐ°}¦C"
-
-#: ../../diskdrake_interactive.pm_.c:363
-msgid "Remove from RAID"
-msgstr "¥ÑºÏºÐ°}¦C¤¤²¾°£"
-
-#: ../../diskdrake_interactive.pm_.c:364
-msgid "Remove from LVM"
-msgstr "¥ÑºÏºÐ°}¦C¤¤²¾°£"
-
-#: ../../diskdrake_interactive.pm_.c:365
-msgid "Modify RAID"
-msgstr "ÅܧóºÏºÐ°}¦C³]©w"
-
-#: ../../diskdrake_interactive.pm_.c:366
-msgid "Use for loopback"
-msgstr "¥Î¨Ó§@¬° loopback"
-
-#: ../../diskdrake_interactive.pm_.c:409
-msgid "Create a new partition"
-msgstr "«Ø¥ß·sªº¤À³Î°Ï"
-
-#: ../../diskdrake_interactive.pm_.c:412
-msgid "Start sector: "
-msgstr "¶}©lªººÏ°Ï: "
-
-#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
-msgid "Size in MB: "
-msgstr "¤j¤p (MB): "
-
-#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
-msgid "Filesystem type: "
-msgstr "Àɮרt²Î®æ¦¡: "
-
-#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
-#: ../../diskdrake_interactive.pm_.c:1010
-msgid "Mount point: "
-msgstr "±¾¸üÂI:"
-
-#: ../../diskdrake_interactive.pm_.c:420
-msgid "Preference: "
-msgstr "³]©w­È: "
-
-#: ../../diskdrake_interactive.pm_.c:462
-msgid "Remove the loopback file?"
-msgstr "²¾°£Â¶¦^¸Ë¸m (loopback) ÀɮסH"
-
-#: ../../diskdrake_interactive.pm_.c:486
-msgid "Change partition type"
-msgstr "§ïÅܤÀ³Î°Ï®æ¦¡"
-
-#: ../../diskdrake_interactive.pm_.c:491
-msgid "Switching from ext2 to ext3"
-msgstr "¥Ñ ext2 ¥¿¦b¤Á´«¨ì ext3"
-
-#: ../../diskdrake_interactive.pm_.c:521
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "±z­n§â loopback ÀÉ®× %s ±¾¸ü¦b¨º¸Ì ?"
-
-#: ../../diskdrake_interactive.pm_.c:528
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"¦]¬°³o­Ó¤À³Î°Ï³Q¥Î§@ loop back ¨Ï¥Î¡A©Ò¥HµLªk¸Ñ°£\n"
-"³o­Ó±¾¸üÂI¡F½Ð¥ý¨ú®ø loopback ªº³]©w¡C"
-
-#: ../../diskdrake_interactive.pm_.c:549
-msgid "Computing FAT filesystem bounds"
-msgstr "¥¿¦b­pºâ fat ¤À³Î°ÏªºÃä¬É"
-
-#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
-#: ../../install_interactive.pm_.c:116
-msgid "Resizing"
-msgstr "¥¿¦b­«³]¤j¤p"
-
-#: ../../diskdrake_interactive.pm_.c:578
-msgid "This partition is not resizeable"
-msgstr "³o­Ó¤À³Î°ÏµLªk½Õ¾ã¤j¤p"
-
-#: ../../diskdrake_interactive.pm_.c:583
-msgid "All data on this partition should be backed-up"
-msgstr "©Ò¦³¦b³o­Ó¤À³Î°Ï¤Wªº¸ê®Æ³£À³¸Ó¥ý¸g¹L³Æ¥÷"
-
-#: ../../diskdrake_interactive.pm_.c:585
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "¦b§ïÅܤÀ³Î°Ï %s ªº¤j¤p¥H«á¡A©Ò¦³¦b³o­Ó¤À³Î°Ï¤Wªº¸ê®Æ³£·|³Q²M°£"
-
-#: ../../diskdrake_interactive.pm_.c:590
-msgid "Choose the new size"
-msgstr "¿ï¨ú·sªº¤j¤p"
-
-#: ../../diskdrake_interactive.pm_.c:591
-msgid "New size in MB: "
-msgstr "·s¤j¤p (MB): "
-
-#: ../../diskdrake_interactive.pm_.c:631
-msgid "Which disk do you want to move it to?"
-msgstr "±z­n²¾°Ê¨ì¨º­ÓºÏºÐ¾÷ ?"
-
-#: ../../diskdrake_interactive.pm_.c:632
-msgid "Sector"
-msgstr "ºÏ°Ï"
-
-#: ../../diskdrake_interactive.pm_.c:633
-msgid "Which sector do you want to move it to?"
-msgstr "±z­n²¾°Ê¨ì¨º­ÓºÏ°Ï¡H"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving"
-msgstr "¥¿¦b²¾°Ê"
-
-#: ../../diskdrake_interactive.pm_.c:636
-msgid "Moving partition..."
-msgstr "¥¿¦b²¾°Ê¤À³Î°Ï..."
-
-#: ../../diskdrake_interactive.pm_.c:657
-msgid "Choose an existing RAID to add to"
-msgstr "¿ï¨ú­n¥[¤JªººÏºÐ°}¦C"
-
-#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
-msgid "new"
-msgstr "·sªº"
-
-#: ../../diskdrake_interactive.pm_.c:674
-msgid "Choose an existing LVM to add to"
-msgstr "¿ï¨ú­n¥[¤JªººÏºÐ°}¦C"
-
-#: ../../diskdrake_interactive.pm_.c:679
-msgid "LVM name?"
-msgstr "LVM ¦WºÙ¡H"
-
-#: ../../diskdrake_interactive.pm_.c:718
-msgid "This partition can't be used for loopback"
-msgstr "³o­Ó¤À³Î°Ï¤£¯à¥Î¨Ó§@¬° loopback ¸Ë¸m"
-
-#: ../../diskdrake_interactive.pm_.c:730
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake_interactive.pm_.c:731
-msgid "Loopback file name: "
-msgstr "Loopback ÀɮצWºÙ: "
-
-#: ../../diskdrake_interactive.pm_.c:736
-msgid "Give a file name"
-msgstr "¿é¤JÀɮצWºÙ"
-
-#: ../../diskdrake_interactive.pm_.c:739
-msgid "File already used by another loopback, choose another one"
-msgstr "Àɮפw³Q¥Î¨Ó§@¬°¨ä¥Lªº loopback¡A½Ð¿ï¾Ü¨ä¥LÀÉ®×"
-
-#: ../../diskdrake_interactive.pm_.c:740
-msgid "File already exists. Use it?"
-msgstr "Àɮפw¸g¦s¦b¤F¡A­n¨Ï¥Î³o­ÓÀɮ׶Ü?"
-
-#: ../../diskdrake_interactive.pm_.c:784
-msgid "device"
-msgstr "¸Ë¸m"
-
-#: ../../diskdrake_interactive.pm_.c:785
-msgid "level"
-msgstr "¶¥¼h"
-
-#: ../../diskdrake_interactive.pm_.c:786
-msgid "chunk size"
-msgstr "²Õ¶ô¤j¤p"
-
-#: ../../diskdrake_interactive.pm_.c:801
-msgid "Be careful: this operation is dangerous."
-msgstr "½Ð¤p¤ß¡A³o­Ó°Ê§@«D±`¦MÀI¡C"
-
-#: ../../diskdrake_interactive.pm_.c:816
-msgid "What type of partitioning?"
-msgstr "¥H¨ººØ¤è¦¡¤À³Î¡H"
-
-#: ../../diskdrake_interactive.pm_.c:834
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"¤£¦n·N«ä¡Aµ{¦¡¤£±µ¨ü¦b³o­ÓºÏºÐ¤W«Ø¥ß /boot ¤À³Î°Ïªº«ü¥O (ºÏ¬W > 1024).\n"
-"¦]¬° LILO ·|¥¢®Ä¾É­PµLªk¶}¾÷¡F­Y±z¤£¥Î LILO¡A®Ú¥»¤£»Ý­n /boot ¤À³Î°Ï"
-
-#: ../../diskdrake_interactive.pm_.c:838
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"±z¿ï¨ú§@¬°®Ú¥Ø¿ý (/) ªº¤À³Î°Ï¦ì¸m¦bµwºÐªº²Ä 1024 ­ÓºÏ¬W¤§«á¡A\n"
-"¦Ó¥B±z¤]¨S¦³³]©w /root ¤À³Î°Ï¡A°²¦p±z·Ç³Æ¥Î LILO ·í¶}¾÷µ{¦¡ªº¸Ü¡A\n"
-"°O±o­n¥[¤J¤@­Ó /boot ¤À³Î°Ï"
-
-#: ../../diskdrake_interactive.pm_.c:844
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"§A¤w¸g¿ï¾Ü¤F¤@¶ô software RAID ªº¤À³Î°Ï·í§@¬° ®Ú¤À³Î°Ï (/) ªº±¾¸üÂI\n"
-"±z­n¥t¥~¹º¤À¤@­Ó¤£¬O¦b software RAID ªº¤À³Î°Ï§@¬° /boot ªº±¾¸üÂI¨Ï¥Î¡A\n"
-"¦p¦¹¶}¾÷ºÞ²zµ{¦¡¤~¯à°÷¥¿±`±Ò°Ê±zªº¨t²Î¡C"
-
-#: ../../diskdrake_interactive.pm_.c:864
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "·Ç³Æ¼g¤JºÏºÐ %s ªºµwºÐ¤À³Îªí!"
-
-#: ../../diskdrake_interactive.pm_.c:868
-msgid "You'll need to reboot before the modification can take place"
-msgstr "±z¶·­n­«·s¶}¾÷¥H¨Ï¥Î§ó°Ê¹Lªº³]©w­È"
-
-#: ../../diskdrake_interactive.pm_.c:879
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "¦b¹ï¤À³Î°Ï %s ¶i¦æ®æ¦¡¤Æªº°Ê§@¥H«á¡A©Ò¦³¦b³o­Ó¤À³Î°Ï¤Wªº¸ê®Æ³£·|³Q²M°£"
-
-#: ../../diskdrake_interactive.pm_.c:881
-msgid "Formatting"
-msgstr "¥¿¦b®æ¦¡¤Æ"
-
-#: ../../diskdrake_interactive.pm_.c:882
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "¥¿¦b®æ¦¡¤Æ loopback ÀÉ®× %s"
-
-#: ../../diskdrake_interactive.pm_.c:883
-#: ../../install_steps_interactive.pm_.c:419
-#, c-format
-msgid "Formatting partition %s"
-msgstr "¥¿¦b®æ¦¡¤Æ¤À³Î°Ï %s"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Hide files"
-msgstr "ÁôÂÃÀÉ®×"
-
-#: ../../diskdrake_interactive.pm_.c:894
-msgid "Move files to the new partition"
-msgstr "±NÀÉ®×·h²¾¨ì·sªº¤À³Î°Ï"
-
-#: ../../diskdrake_interactive.pm_.c:895
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"%s ¥Ø¿ý¤w¸g¥]§t¤F¸ê®Æ¤F\n"
-"(%s)"
-
-#: ../../diskdrake_interactive.pm_.c:906
-msgid "Moving files to the new partition"
-msgstr "¥¿¦b±NÀÉ®×·h²¾¨ì·sªº¤À³Î°Ï"
-
-#: ../../diskdrake_interactive.pm_.c:910
-#, c-format
-msgid "Copying %s"
-msgstr "¥¿¦b½Æ»s %s"
-
-#: ../../diskdrake_interactive.pm_.c:914
-#, c-format
-msgid "Removing %s"
-msgstr "¥¿¦b²¾°£ %s"
-
-#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
-msgid "Device: "
-msgstr "¸Ë¸m: "
-
-#: ../../diskdrake_interactive.pm_.c:938
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS ©³¤UªººÏºÐ¥N¸¹: %s (²q´ú­È¡A¶È¨Ñ°Ñ¦Ò)\n"
-
-#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
-#: ../../diskdrake_interactive.pm_.c:1014
-msgid "Type: "
-msgstr "®æ¦¡: "
-
-#: ../../diskdrake_interactive.pm_.c:946
-msgid "Name: "
-msgstr "¦WºÙ: "
-
-#: ../../diskdrake_interactive.pm_.c:954
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "¶}©l: ²Ä %s ºÏ­y\n"
-
-#: ../../diskdrake_interactive.pm_.c:955
-#, c-format
-msgid "Size: %s"
-msgstr "¤j¤p: %s"
-
-#: ../../diskdrake_interactive.pm_.c:957
-#, c-format
-msgid ", %s sectors"
-msgstr ", ²Ä %s ºÏ­y"
-
-#: ../../diskdrake_interactive.pm_.c:959
-#, c-format
-msgid "Cylinder %d to cylinder %d\n"
-msgstr "²Ä %d ºÏ¬W¨ì²Ä %d ºÏ¬W\n"
-
-#: ../../diskdrake_interactive.pm_.c:960
-msgid "Formatted\n"
-msgstr "¤w®æ¦¡¤Æ\n"
-
-#: ../../diskdrake_interactive.pm_.c:961
-msgid "Not formatted\n"
-msgstr "¥¼®æ¦¡¤Æ\n"
-
-#: ../../diskdrake_interactive.pm_.c:962
-msgid "Mounted\n"
-msgstr "¤w±¾¸ü\n"
-
-#: ../../diskdrake_interactive.pm_.c:963
-#, c-format
-msgid "RAID md%s\n"
-msgstr "ºÏºÐ°}¦C (RAID) md%s\n"
-
-#: ../../diskdrake_interactive.pm_.c:965
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"¶¦^¸Ë¸m (loopback) ÀÉ®×:\n"
-"   %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:966
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"¹w³]¶}¾÷ªº¤À³Î°Ï\n"
-"    (µ¹ MS-DOS ¶}¾÷µ{¦¡¥Îªº, ¸ò lilo µLÃö)\n"
-
-#: ../../diskdrake_interactive.pm_.c:968
-#, c-format
-msgid "Level %s\n"
-msgstr "RAID ¶¥¼h %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:969
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "²Õ¶ô¤j¤p %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:970
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID ºÏºÐ %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:972
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback ÀɮצWºÙ: %s"
-
-#: ../../diskdrake_interactive.pm_.c:975
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Chances are,³o­Ó¤À³Î°Ï¬Ý°_¨Ó¦ü¥G\n"
-"¬O³z¹LÅX°Êµ{¦¡²£¥Í¥X¨Óªº¡C©Ò¥H\n"
-"±zÀ³¸Ó¤£­n¥h²§°Ê³o­Ó¤À³Î°Ï¸ê®Æ¡C\n"
-
-#: ../../diskdrake_interactive.pm_.c:978
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"³o¬O¤@­Ó¥Î¨Ó§@¬°¦h­«¶}¾÷\n"
-"¨Ï¥Îªº¯S®í¤À³Î°Ï¡C\n"
-
-#: ../../diskdrake_interactive.pm_.c:997
-#, c-format
-msgid "Size: %s\n"
-msgstr "¤j¤p: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:998
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "µwºÐ¸ê°T: %s ºÏ¬W, %s Ū¼gÀY, %s ºÏ°Ï\n"
-
-#: ../../diskdrake_interactive.pm_.c:999
-msgid "Info: "
-msgstr "¸ê°T: "
-
-#: ../../diskdrake_interactive.pm_.c:1000
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM ºÏºÐ %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1001
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "µwºÐ¤À³Îªí§Î¦¡: %s\n"
-
-#: ../../diskdrake_interactive.pm_.c:1002
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "¦ì¦b bus %d id %d\n"
-
-#: ../../diskdrake_interactive.pm_.c:1016
-#, c-format
-msgid "Options: %s"
-msgstr "¿ï¶µ: %s"
-
-#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
-#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "¥H %s ®æ¦¡¤Æ %s ¥¢±Ñ"
-
-#: ../../fs.pm_.c:506
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "¤£ª¾¹D­n¦p¦ó±N %s ®æ¦¡¤Æ¬° %s ®æ¦¡"
-
-#: ../../fs.pm_.c:568
-msgid "mount failed"
-msgstr "±¾¸ü¥¢±Ñ"
-
-#: ../../fs.pm_.c:588
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck ¥¢±Ñ¡A¶Ç¦^ %d ¿ù»~¥N½X©ÎªÌ¬O %d «H¸¹"
-
-#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
-msgid "mount failed: "
-msgstr "±¾¸ü¥¢±Ñ: "
-
-#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "¨ø¤U %s ªº±¾¸ü®Éµo¥Í¿ù»~: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr ""
-
-#: ../../fsedit.pm_.c:461
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "¤p©ó 16MB ªº¤À³Î°Ï¤£¯à³]¦¨ JFS ®æ¦¡"
-
-#: ../../fsedit.pm_.c:462
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "¤p©ó 32MB ªº¤À³Î°Ï¤£¯à³]¦¨ ReiserFS ®æ¦¡"
-
-#: ../../fsedit.pm_.c:471
-msgid "Mount points must begin with a leading /"
-msgstr "«ü©wªº±¾¸üÂI»Ý¥H / ¶}ÀY"
-
-#: ../../fsedit.pm_.c:472
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "¤w¸g¦³¤À³Î°Ï¤À°t¨ì±¾¸üÂI %s ¤F\n"
-
-#: ../../fsedit.pm_.c:476
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "±z¤£¯à¨Ï¥Î LVM Logical Volume ¨Ó³Ì¬° %s ªº±¾¸üÂI"
-
-#: ../../fsedit.pm_.c:478
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:480
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "±z»Ý­n¤@­Ó¯u¥¿ªº¤À³Î°Ï (ext2, reiserfs) ¨Ó©ñ³o­Ó±¾¸üÂI\n"
-
-#: ../../fsedit.pm_.c:596
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "¥¿¦b¶}±Ò %s ¥H¼g¤JÀɮ׮ɵo¥Í¿ù»~: %s"
-
-#: ../../fsedit.pm_.c:681
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"µo¥Í¤F¤@­Ó¿ù»~ - §ä¤£¨ì¥ô¦ó¥i¥Îªº¸Ë¸m¥i¥H¥Î¨Ó«Ø¥ß·sªºÀɮרt²Î¡A½ÐÀˬd±zªºµwÅé"
-"ª¬ªp¥H§ä¥X°ÝÃDªº]"
-
-#: ../../fsedit.pm_.c:704
-msgid "You don't have any partitions!"
-msgstr "±z¨S¦³¥ô¦ó¤À³Î°Ï¥i¥Î !"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course -\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log into the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as that of\n"
-"\"root\" from a security point of view, but that is no reason to neglect it\n"
-"- after all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installs. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
-"knows if a selected package is located on another CDROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from CDROM, you will first be\n"
-"asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups.\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s).\n"
-"\n"
-" * \"Server\": finally, if the machine is intended to be a server, you will\n"
-"be able to select which of the most common services you wish to see\n"
-"installed on the machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Update\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:115
-msgid ""
-"Finally, depending on your choice of whether or not to select individual\n"
-"packages, you will be presented a tree containing all packages classified\n"
-"by groups and subgroups. While browsing the tree, you can select entire\n"
-"groups, subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. A time to complete estimate is displayed\n"
-"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
-"of coffee.\n"
-"\n"
-"!! If a server package has been selected either intentionally or because it\n"
-"was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disc icon at the bottom of the list allows to load the\n"
-"packages list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:151
-msgid ""
-"If you wish to connect your computer to the Internet or to a local network,\n"
-"please choose the correct option. Please turn on your device before\n"
-"choosing the correct option to let DrakX detect it automatically.\n"
-"\n"
-"Mandrake Linux proposes the configuration of an Internet connection at\n"
-"installation time. Available connections are: traditional modem, ISDN\n"
-"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
-"(Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the manual chapter about Internet connections for details\n"
-"about the configuration, or simply wait until your system is installed and\n"
-"use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation or if you\n"
-"have finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:172
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need."
-msgstr ""
-"±µ¤U¨Ó±z»Ý­n¿ï¾Ü§A¥´ºâ©ó±Ò°Ê¨t²Î®É­nÅý¨º¨ÇªA°È°õ¦æ¹B§@¡C\n"
-"\n"
-"©Ò¥X²{ªº©Ò¦³¥i¿ï¾Ü¶µ¥Ø¡A³£¬O¦w¸Ë¹Lµ{¤¤©Ò¦w¸Ë¶i¥hªº¬ÛÃö¨t²ÎªA°È®M¥ó¡C\n"
-"½Ð¥J²Ó¸Ô²Ó¬d¬Ý¨M©w¨º¨ÇªA°È­nÅý¥¦©ó¶}¾÷®É¯à°÷±Ò°Ê¡C\n"
-"\n"
-"·í§A¿ï¨ú¸Ó¶µ¥Ø®É¡A¿Ã¹õ®ÇÃä·|¥X²{¤@­Ó²²¤»¡©ú¡A§i¶D±z³o­ÓªA°È¶µ¥Øªº¥Î³~¡C\n"
-"¹ï¤F¡A­Y¬O±z¹ï©ó¸Ó¶µ¥Ø¹ê¦b¤£½T©w¬O§_­n±Ò¥Îªº¸Ü¡A¤ñ¸û¦w¥þªº§@ªk´N¬Oºû«ù\n"
-"­ì¼Ë¤£­n°Ê§@§Y¥i¡C\n"
-"\n"
-"½Ðª`·N¤@¤U¡A¦pªG±z³o¥x¾÷¾¹¬O±Mªù­n·í§@ Internet ¦øªA¾¹´£¨Ñºô¸ô¤W¬ÛÃöªA°È\n"
-"ªº¸Ü¡A«Øij±z¸Ô²Ó«ä¦Ò¨M©w¨º¨ÇªA°È­n¶}±ÒÃö³¬¡A¦]¬°¬Y¨ÇªA°È®M¥ó±Ò°Ê«á¥i¯à·|\n"
-"¦³¤@¨Ç¼ç¦bªº¦w¥þ©Ê­·ÀI°ÝÃD¡C«Øij±z¡A¥u¿ï¨ú­n§A¶}©ñªºªA°È¶µ¥Ø§Y¥i¡C"
-
-#: ../../help.pm_.c:188
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
-"local time according to the time zone you selected."
-msgstr ""
-"GNU/Linux ¨t²Î¤º³¡¨Ï¥Î GMT (®æªL«Âªv®É¶¡)¡AµM«á¨Ì·Ó±z©Ò³]©wªº®É°Ï¶µ¥Ø\n"
-"§â®É¶¡Âà´«¦¨¬°±z¥»¦aºÝ©ÒÅã¥Ü¨Ï¥Îªº®É¶¡¡C"
-
-#: ../../help.pm_.c:192
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" install, you will enter the X configuration\n"
-"wizard. See the corresponding section of the manual for more information\n"
-"about this wizard.\n"
-"\n"
-"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
-"the next step. If you cannot see the message, it simply means that the\n"
-"configuration was wrong and the test will automatically end after 10\n"
-"seconds, restoring the screen."
-msgstr ""
-"X (for X Window System)¡AX Àô¹Ò¬O Unix ¨t²Î¤Uªº¤@®M GUI ¹Ï§Î¤¶­±Àô¹Ò¡C\n"
-"¦b¥Ø«e±z¦w¸Ë¨Ï¥Îªº Mandrake Linux ¤¤¡A§Ú­Ì´£¨Ñ¤F¥i¥H¦b X ¤W¹B§@¨Ï¥Îªº\n"
-"¾ã¦X¬O¹Ï§Î¾Þ§@¤¶­±¡A¤ñ¤è¹³¬O KDE¡BGnome¡BAfterStep¡BWindowMaker µ¥µ¥¡C\n"
-"¦b³o­Ó¦a¤è¡ADrakX µ{¦¡±N·|³]©w¦n±Ò°Ê X ©Ò»Ý­nªº²ÕºAÀô¹Ò¡C\n"
-"\n"
-"³q±` DrakX µ{¦¡¥i¥H«ÜÁo©úªº°»´ú¥X¨t²ÎµwÅéÀô¹Ò¡A°£«D±zªº¨t²ÎµwÅé¹L©ó¦ÑÂÂ\n"
-"©ÎªÌ¬O¤Ó·s¤F¡A­n¤£µM¤@¯ë¨Ó»¡³£¥i¥H«Ü¶¶§Q°»´ú³]©w¦n¡C·í DrakX °»´ú§¹²¦«á¡A\n"
-"¥¦·|±Ò°Ê X Àô¹Ò¶i¦æÅã¥Üªº°Ê§@¡AµM«á°T°Ý±z¬O§_¥i¥H¥¿½Tªº¬Ý¨ì¿Ã¹õÅã¥Üªºµe­±¡C\n"
-"\n"
-"­Y¬O§A·íªì¬O¨Ï¥Î \"±M®a«¬\" ¼Ò¦¡¨Ó¦w¸Ëªº¸Ü¡A¦w¸ËºëÆFµ{¦¡±N·|«Ý±z¶i¤J±Ð¸Ô²Ó\n"
-"ªº³]©w¹Lµ{¡C¬ÛÃö¸ê°T±z¥i¥H°Ñ¦Ò¤â¥U¤W§ó¶i¤@¨Bªº»¡©ú¡C\n"
-"\n"
-"·í´ú¸Õ¶i¤J X Àô¹Ò®É¡A­Y¬OÅã¥Ü¥¿½T¡A§A¥i¥H¬Ý¨ì¤@­Ó¹ï¸Ü¤è¶ô¸ß°Ý±z¬O§_º¡·N\n"
-"¥Ø«eªº³]©w¡C·í§A¿ï¾Ü \"Yes\" ½T©w«á¡ADrakX µ{¦¡±N·|Ä~Äò¶i¦æ¤U­±ªº¨BÆJ¡C\n"
-"­Y¬O¶i¤J X Àô¹Ò´ú¸Õ®Éµo¥Í¿ù»~¡A§A¬Ý¤£¨ì¥ô¦ó¿Ã¹õ¿é¤JÅã¥Ü¡A©ÎªÌ¬O¦b 10 ¬í\n"
-"ªº®É¶¡¤º§A¨S¦³¦^À³¹ï¸Ü¤è¶ô°T°Ý°Ê§@ªº¸Ü¡A´ú¸Õ·|¦Û¦æµ²§ôµM«á«ì´_¤Á´«¨ì­ì¥»\n"
-"ªºµe­±¡A§A¥i¥H¦AÄ~Äò¿ï¾Ü¬ÛÃö²ÕºA¨Ã´ú¸Õª½¨ì¨S°ÝÃDµ¥¡C"
-
-#: ../../help.pm_.c:212
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server you want, choose \"FBDev\". This is a failsafe option which works\n"
-"with any modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"·í²Ä¤@¦¸³]©w X\tÀô¹Ò²ÕºA®É¡A¤]³\±z¤£¬O«Üº¡·N©Ò³]©w¥X¨Óªºµ²ªG¡C¤ñ¤è§A³]©w¦n\n"
-"ªº X Àô¹Ò¡A¬Ý°_¨Ó¿Ã¹õÅã¥Ü«Ü¤p¡B©ÎªÌ¬O¸ÑªR«×¤£¹ï¡A¬Æ¦Ü¿Ã¹õ¦³°¾²¾µ¥±¡ªp¡C\n"
-"½Ð¤£­n¦Ç¤ß¡A¦³­@¤ßªº¦h´ú¸Õ´X¦¸´N¥i¥H¦¨¥\¤F¡CDrakX µ{¦¡µ¥µ¥·|¸ß°Ý±z¬O§_º¡·N\n"
-"¥Ø«eªº³]©w­È¡A§A¥i¥H«ùÄò´ú¸Õ¿ï¾Üª½¨ìº¡·N®É¦A§i¶D DrakX µ{¦¡¥i¥H¨Ï¥Î·í®É\n"
-"±z©Ò¿ï¥Îªº²ÕºA¡C\n"
-"\n"
-"¦pªG§A´ú¸Õ¹Lµ{¤¤¡A¥X²{µLªk¥¿±`±Ò°Ê X Àô¹Òªº±¡ªp¡A¨º¥i¯à¬O¦w¸Ëµ{¦¡¨S¦³¥¿½T\n"
-"°»´ú¥X§AÅã¥Ü¥dºØÃþ¡A­Y¬O¦p¦¹½Ð¿ï¨ú \"§ïÅÜÅã¥Ü¥d³]©w\"¡A¦A¿ï¾Ü \n"
-"\"Unlisted card\" ¤â°Ê¿ï¾Ü±z¨t²Î©Ò¦w¸ËªºÅã¥Ü¥d§Y¥i¡C¤@¯ë¨Ó»¡¡A­Y¬Oµ{¦¡µLªk\n"
-"¶¶§Q°»´ú¥X¨t²Î©Ò¨Ï¥ÎªºÅã¥Ü¥dªº¸Ü¡A¸Ó´ÚÅã¥Ü¥d¥i¯à¤ñ¸û¯S®í¡A¤]³\¤@¯ë¶Ç²Îªº\n"
-"XFree86 ­ì¥Í©ÊªºÅX°Êµ{¦¡µLªkÅX°Ê¸ÓÅã¥Ü¥d¤u§@¡C¦]¦¹·í¦w¸Ëµ{¦¡¥X²{±z­n¨Ï¥Î\n"
-"­þ¤@´Úªº X Server ¶µ¥Ø®É¡A½Ð¿ï¾Ü \"FBDev\" ¶µ¥Ø¡C\"FBDev\" ¶µ¥ØªºÅã¥Ü¤è¦¡\n"
-"¬O³z¹L VESA 2.0 ªº¤u·~¼Ð·ÇÅã¥Ü³W®æ¤¶­±¨ÓÅX°ÊÅã¥Ü¥d¹F¨ìø¹Ïªº¥Øªº¡A¥Ø«e¤@¯ë\n"
-"ªº AGP Åã¥Ü¥d³£¨ã³Æ³o­ÓÅã¥Ü¼Ð·Ç³W®æ¡C¿ï¨ú¦n«á¡A½Ð¿ï¾Ü \"¦A¦¸´ú¸Õ³]©w­È\"\n"
-"½T©w©Ò¿ï¾Üªº¶µ¥Ø¬O§_¥¿½T¨S°ÝÃD¡C"
-
-#: ../../help.pm_.c:224
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"³Ì«áªº®É­Ô¡A§AÀ³¸Ó·|¬Ý¨ì¸ß°Ý±z¬O§_­n¦b¶}¾÷§¹¦¨«áª½±µ¶i¤J¹Ï§Îµn¤J¤¶­±¡C\n"
-"¤@¯ë§Ú­Ì«Øij¡A­Y¬O±zªº¹q¸£¬O¥Î¨Ó·í§@¦øªA¾¹¨Ï¥Îªº¸Ü¡A³o­Ó¶µ¥Ø¥i¥H¿ï¾Ü\n"
-"\"§_\"¡A¦]¬°¤@¯ë Server ¦øªA¾¹¨Ã¤£¶] X Àô¹Ò°õ¦æ¬ÛÃö GUI ¹Ï§Î¤¶­±³nÅéµ{¦¡¡C"
-
-#: ../../help.pm_.c:231
-msgid ""
-"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
-"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
-"the prompt. But in case your computer cannot boot from the CDROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux CDROM ¤º«Ø´£¨Ñ rescue ±Ï´©¥\¯à¼Ò¦¡¡C±z¥i¥H¦b¨Ï¥Î¦w¸Ë CD ¤ù\n"
-"¶}¾÷®É¡A«ö¤U F1 Áä¡AµM«á©ó´£¥Ü°T®§®É¿é¤J \"rescue\" §Y¥i¶i¤J¡C­Y¬O±zªº\n"
-"¹q¸£¤£¤ä´©ª½±µ¨Ï¥Î CDROM ¶}¾÷±Ò°Êªº¸Ü¡A§A¦³´X­Ó¤è¦¡¥i¥H¶i¦æ:\n"
-"\n"
-"* ·í±z¦w¸Ë¶}¾÷±Ò°Êµ{¦¡®É¡ADrakX µ{¦¡±N·|§ó·s¶}¾÷ºÏ°Ï (MBR) ªº¬ö¿ý¡A¨º±z\n"
-"´N¯à°÷±Ò°Ê±zµwºÐ¤W©Ò¦w¸Ëªº Windows ¨t²Î (¦pªG±z¨t²Î¦³¦w¸Ëªº¸Ü) ©ÎªÌ¬O\n"
-"GNU/Linux ¨t²Î¡C¦pªG±z»Ý­n­«·s¦w¸Ë Windows ªº¸Ü¡AMicrosoft Windows ªº\n"
-"¦w¸Ëµ{¦¡±N·|§ó·s¶}¾÷ºÏ°Ï¡A³o·|§â­ì¥»¦w¸Ë¦b¶}¾÷ºÏ°Ï¤Wªº Linux ±Ò°Êµ{¦¡\n"
-"Âл\¹L¥h¡A¨º³o®É­Ô´NµLªk±Ò°Ê Linux ¨t²Î¤F¡C\n"
-"\n"
-"¦pªGµo¥Í¤F³o­Ó±¡ªp¡A±zªº Linux ¨t²Î±NµLªkª½±µ¥ÑµwºÐ±Ò°Ê¡A³o®É­Ô·N¨ýµÛ\n"
-"±z»Ý­n¤@±i¯à°÷±Ò°Ê Linux ¨t²Îªº¶}¾÷ºÏ¤ù¶i¦æ¶}¾÷ªº°Ê§@¡Crescue ±Ï´©ºÏ¤ù\n"
-"¤º¥]§t¤F³\¦h¨t²Î¤u¨ã¡A¯à°÷Åý±z¦b¶}¾÷¤§«áÀ˵ø­ì¥»¦bµwºÐªº Linux ¨t²Î¡A¨Ã\n"
-"¶i¦æ¬ÛÃöÀˬd¡B­×´_µ¥°Ê§@¡C\n"
-"\n"
-"·í§A¿ï¨ú³o­Ó¨BÆJ¶µ¥Ø®É¡A±z»Ý­n¤@±iºÏºÐ¤ù¥H«K©ó»s§@¤@±i resuce ±Ï´©ºÏ¤ù¡A\n"
-"½Ðª`·Nªº¬O¡ADrakX µ{¦¡·|¹ï³o¤@±iºÏ¤ù¶i¦æ®æ¦¡¤Æ°Ê§@¡A­ì¥»¸ê®Æ³£·|®ø¥¢¡C"
-
-#: ../../help.pm_.c:255
-msgid ""
-"At this point you need to choose where on your hard drive to install your\n"
-"Mandrake Linux operating system. If your hard drive is empty or if an\n"
-"existing operating system is using all the space available, you will need\n"
-"to partition it. Basically, partitioning a hard drive consists of logically\n"
-"dividing it to create space to install your new Mandrake Linux system.\n"
-"\n"
-"Because the effects of the partitioning process are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the install in Expert mode, you will enter DiskDrake,\n"
-"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
-"partitions. See the DiskDrake chapter of the manual. From the installation\n"
-"interface, you can use the wizards as described here by clicking the\n"
-"\"Wizard\" button of the dialog.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do that, you can delete your\n"
-"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
-"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
-"be performed without the loss of any data. This solution is recommended if\n"
-"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your Microsoft Windows partition will be smaller than at the\n"
-"present time. You will have less free space under Microsoft Windows to\n"
-"store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after confirmation.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
-"can very easily lose all your data. Hence, do not choose this unless you\n"
-"know what you are doing."
-msgstr ""
-"±µ¤U¨Ó¡A±z»Ý­n¿ï¾Ü¤@Áû·Ç³Æ¥Î¨Ó¦w¸Ë Mandrake Linux §@·~¨t²ÎªºµwºÐ¡C\n"
-"¦pªG±zªºµwºÐ¬O¥þ·s©|¥¼¨Ï¥Îªº¸Ü¡A±z»Ý­n¶i¦æ¤À³Îªº°Ê§@¥H«K©ó¤~¯à°÷\n"
-"¨Ï¥Î©Ò¹º¤À¥X¨Óªº¤À³Î°Ï¶i¦æ¦w¸Ë¡C¦Ó­Y¬O±zµwºÐ­ì¥»´N¤w¸g¦³¦w¸Ë¨ä¥L\n"
-"§@·~¨t²Îªº¸Ü¡A¥u­nµwºÐÁÙ¦³ªÅªº¨S¨Ï¥Îªº¤À³Î°Ï¡A¬Æ¦Ü¬O¤w¸g¹º¤Àµ¹¬Y\n"
-"§@·~¨t²Î¨Ï¥Î¡A³£ÁÙ¬O¯à°÷¤ä´©½Õ¾ã¤w¸g³Q¨Ï¥Îªº¤À³Î°Ï¡A®¿¥X¥i¥Î¤À³Î°Ï\n"
-"ªÅ¶¡¨Ó¶i¦æ Mandrake Linux ªº¦w¸Ë¡C\n"
-"\n"
-"­Y¬O±zµwºÐ­ì¥»´N¤w¸g¦³¸ê®Æªº¸Ü¡A«á­±ªº¤À³Î°Ê§@¡A°ò¥»¤W¬O«Ü¦MÀIªº¡A\n"
-"­Y¬O¾Þ§@¥¢»~±N¾É­P¤£¥i¹w´Áªº¸ê®Æ·´·lµ¥±¡ªp¡C­Y¬O±z¤£¼ô±x¤À³Îªº¤è¦¡¡A\n"
-"«Øij±z¥i¥H¨Ï¥ÎºëÆF¼Ò¦¡¦Û°ÊÀ°±z¹º¤À¡C¬ÛÃö°ÝÃD¡A«Øij±z¥ý¾\Ū¤â¥U¤Wªº\n"
-"¬ÛÃö¸ê°T¡A¥H«K©ó¸`¬Ù±zªº®É¶¡¡C\n"
-"\n"
-"­Y¬O±z·íªì¬O¿ï¾Ü¨Ï¥Î±M®a¼Ò¦¡¶i¦æ¦w¸Ëªº¸Ü¡A±N·|¶i¤J DiskDrake µ{¦¡¡A\n"
-"±z·|¬Ý¨ì¤@­Ó¾ã¦X¦¡ªº¤À³Î¤¶­±¡A±z±N¯à°÷«Ü¤è«Kªº¶i¦æ¤À³Î°Ê§@¡C\n"
-"­Y¬O±z¤£¼ô±x¤À³Îªº¤è¦¡¡A«Øij±z¥i¥HÂI¿ïºëÆF¼Ò¦¡«ö¶sÅýµ{¦¡¦Û°ÊÀ°±z\n"
-"¨M©w¹º¤À¤è¦¡¡C\n"
-"\n"
-"¦pªG¸ÓµwºÐ¸Ë¸m¥ý«e¤w¸g¤À³Î¹L¤F¡A±z¥i¥Hª½±µ¿ï¾Ü¨M©w«ç»ò¨Ï¥Î³o¨Ç¤À³Î°Ï\n"
-"§@¬° Linux ¨t²Î¦w¸Ë¨Ï¥Î¡C\n"
-"\n"
-"¦pªGÁÙ¨S¦³¤À³Î°Ï«Ø¥ß¡A±z»Ý­n«Ø¥ß¾A·íµ¹ Linux ¨Ï¥Îªº¤À³Î°Ï¥H«K©ó¯à°÷\n"
-"§â Linux ¨t²Î¦w¸Ë¶i¥h¡C¥t¥~¡A¨Ì¾Ú±zµwºÐ³]©w²ÕºA¡A¥i¯à·|¦³³o¨Ç¶µ¥Ø¨Ï¥Î:\n"
-"\n"
-" * \"¨Ï¥Î³Ñ¾lªÅ¶¡\" : ¸Ó¶µ¥Ø±N·|¦Û°Ê¹º¤À¥i¥Îªº³Ñ¾lªÅ¶¡¨Ó¨Ï¥Î¡C\n"
-"\n"
-" * \"¨Ï¥Î²{¦³¤À³Î°Ï\" : ¸Ó¶µ¥Ø±N·|¦Û°Ê¨Ï¥Î­ì¥»¤w¸g¹º¤À¦nªº¤À³Î°Ï¡C\n"
-"\n"
-" * \"¨Ï¥Î³Ñ¾l¥i¥Îªº Windows ªÅ¶¡\" : ¦pªG±z¨t²Î¦³¦w¸Ë Microsoft \n"
-"Windows ªº¸Ü¡A¨Ã¥B Windows ¤À³Î°Ï¤W¦³³Ñ¾l¥i¥ÎªºªÅ¶¡ªº¸Ü¡A¸Ó¶µ¥Ø±N\n"
-"¯à°÷§Q¥Î³o¨ÇªÅ¶¡¡A³z¹L½Õ¾ã¸Ó¤À³Î°Ï®¿¥X¥i¥ÎªÅ¶¡¥H«K©ó¨Ó¦w¸Ë Linux ¡C\n"
-"¤£¹Lª`·Nªº¬O¡A½Õ¾ã¸Ó¤À³Î°Ï¤j¤p¡A¦³¤@©wµ{«×ªº­·ÀI¡A«Øij§A­n¨Ï¥Î¸Ó¶µ¥Ø\n"
-"ªº¸Ü¡A¥ý³Æ¥÷±z Windows ¤Wªº­«­n¸ê®Æ¥H¨¾¤£´ú¡C\n"
-"\n"
-"¦¹¥~¡A½Ðª`·N¤@¤U¡A·í¨Ï¥Î³o­Ó¶µ¥Ø«á¡AWindows ¥i¥Îªº³Ñ¾lªÅ¶¡±N·|´î¤Ö¡A\n"
-"³o·N¨ý±z¦b Windows Àô¹Ò¤U¥i¥ÎªºªÅ¶¡·|´î¤Ö¡C\n"
-"\n"
-" * \"§R°£¾ã­ÓºÏºÐ\" : ¦pªG±z­n²MªÅ¬Y­ÓµwºÐ¤W©Ò¦³ªº¤À³Î°Ï¡A±z¥i¥H¿ï¾Ü\n"
-"¨Ï¥Î³o­Ó¶µ¥Ø¡C¦ý¬O¤p¤ß¨Ï¥Î¡A¦]¬°§R°£«á­ì¥»µwºÐ¬ÛÃö¤À³Î°Ï¥H¤ÎÀx¦sªº¸ê®Æ\n"
-"³£·|®ø¥¢¡C\n"
-"\n"
-"*  \"±M®a¼Ò¦¡\" : ³o­Ó¶µ¥Ø¯à°÷Åý±z¤â°Ê¦Û¦æ¨M©w¹º¤À¤è¦¡¡C¤£¹L½Ð¤p¤ß¨Ï¥Î¡A\n"
-"¦]¬°³o¬Û·í¦n¥Î¡A¤]·N¨ýµÛ­Y¬O¾Þ§@¤£·í¥¢»~¥i¯à·|·´·l±zªºµwºÐ¸ê®Æ¡A¦]¦¹\n"
-"½Ð¤p¤ß¨Ï¥Î¡C"
-
-#: ../../help.pm_.c:319
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"·í¾ã­Ó¦w¸Ë¨BÆJ¨ì³o¸Ìªº®É­Ô¡A¨º´N¥Nªí±z¤w¸g§¹¾ã¤F GNU/Linux ¨t²Îªº¦w¸Ë\n"
-"¨BÆJ¡A±z¥i¥HÂI¿ï \"½T©w\" ­«·s±Ò°Ê¹q¸£¡C\n"
-"\n"
-"¦b±M®a¼Ò¦¡ªº \"¶i¶¥\" «ö¶s¶µ¥Ø¡A±N·|Åã¥Ü¨â­Ó¥i¥Îªº¶µ¥ØÅý±z¿ï¾Ü:\n"
-"\n"
-"   ³o¸Ìªº¥\¯à¡A¹ï©ó±z»Ý­n¤j¶q¦w¸Ë«Ü¦h Linux ¨t²Î¦b¤@¤j¸s¾÷¾¹¤Wªº¸Ü¨Ó»¡\n"
-"³o¬O¬Û·í¦³À°§Uªº¡CÃö©ó³o¸Ì¬ÛÃö¶i¤@¨B¸ê®Æ¡A±z¥i¥H°Ñ¦Òºô­¶¤W¦Û°Ê¦w¸Ë³¹¸`\n"
-"ªº¬ÛÃö»¡©ú¡C\n"
-"\n"
-" * \"²£¥Í¦Û°Ê¦w¸ËºÏ¤ù\": ³o±N·|«Ø¥ß¤@±i¯à°÷¦Û°Ê¦w¸ËªººÏ¤ù¡A¾ã­Ó¦Û°Ê¤Æ¦w¸Ë\n"
-"ªº¨BÆJ¡A±N·|¨Ì·Ó±zªº¾Þ§@¹Lµ{¨Ó¶i¦æ¡C\n"
-"\n"
-"   ½Ðª`·N³oÃä¡A·í±zÂI¿ï³o­Ó¶µ¥Ø«á¡A¥i¥H¬Ý¨ìÁÙ¦³¨â­Ó°Ñ¼Æ¶µ¥Ø¥i¨Ñ¿ï¾Ü:\n"
-"\n"
-"    * \"­«¼½\" ¡C³o¬O¥b¦Û°Ê¦w¸Ë¤è¦¡¡AºÏºÐ¤À³Î¶µ¥Ø±N·|ºû«ù¤â°Ê¤è¦¡¾Þ§@¡C\n"
-"\n"
-"    * \"¦Û°Ê¤Æ\" ¡C³o¬O¥þ¦Û°Êªº¦w¸Ë¤è¦¡¡A¥]§tºÏºÐµ¥¦MÀI°Ê§@³£·|¦Û°Ê³B²z¡C\n"
-"\n"
-" * \"Àx¦s®M¥ó¿ï¾Ü\" (*): ³o­Ó¶µ¥Ø´N¬O±N±z¥ý«e¾Þ§@¿ï¾Ü©Ò­n¦w¸Ëªº®M¥ó²M³æ\n"
-"¶µ¥Ø³£¬ö¿ý°_¨Ó¦s©ñ¨ìºÏ¤ù¤º¡A¥H«K©ó±z¥i¥H¦b¨Æ«áÁٻݭn¦w¸Ë Mandrake Linux \n"
-"®É¡A¥i¥Hª½±µ¸ü¤J¥ý«e©Ò¿ï¾Ü­n¦w¸Ëªº®M¥ó²M³æ¡A¤£»Ý­n¦A¤@¦¸­«·s¿ï¾Ü¤F¡C­Y¬O\n"
-"±z­n¨Ï¥Î³o±iºÏ¤ù¬ö¿ýªº®M¥ó²M³æ¶i¦æ¦w¸Ëªº¸Ü¡A¶}¾÷®É¥X²{ Mandrake Logo ®É¡A\n"
-"«ö¤U F1 «ö¥ó¡AµM«á¿é¤J: linux defcfg=\"floppy\" §Y¥i¡C\n"
-"\n"
-"(*) ­n¨Ï¥Î Àx¦s®M¥ó¿ï¾Ü ¥\¯à¡A±z»Ý­n¤@±i¤w¸g¨Ï¥Î DOS/Windows µ¥®æ¦¡¤Æ¦n\n"
-"ªº FAT ®æ¦¡ºÏ¤ù¥H«K©ó¨Ï¥Î¡C(GNU/Linux Àô¹Ò¤U¡A¥i¥H¥Î mformat a: »s§@¤@±i\n"
-"ªÅ¥ÕºÏ¤ù¡C)"
-
-#: ../../help.pm_.c:350
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of them.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disc."
-msgstr ""
-"¥ô¦ó·s«Ø¥ßªº¤À³Î°Ï³£¥²¶·®æ¦¡¤Æ«á¤~¯à°÷¨Ó¨Ï¥Î¡C(®æ¦¡¤Æ¥]§t«Ø¥ßÀɮרt²Î)¡C\n"
-"\n"
-"·íµM¡A³o®É­Ô±z¤]¥i¥H¿ï¾Ü®æ¦¡¤Æ³o¨Ç¤w¸g¦s¦bªº¤À³Î°Ï¡A¨º­ì¥»¸Ì­±ªº¸ê®Æ³£\n"
-"±N·|®ø¥¢¡C­Y¬O­n¨Ï¥Î¦¹¶µ¥Ø¡A½Ð¿ï¾Ü­n®æ¦¡¤Æªº¤À³Î°Ï¡C\n"
-"n½Ðª`·N¤@¤U¡A¨Ã¤£¬O©Ò¦³¥ý«e¤w¸g¦s¦bªº¤À³Î°Ï³£±o­«·s®æ¦¡¤Æ¡A³q±`±z¤]³\·|\n"
-"±N¨t²Î¹º¤À¥X³\¦h¤À³Î°Ï·í§@¤£¦Pªº¥Î³~¡A¤ñ¤è§â \"/\", \"/usr\", \"/var\"\n"
-"»P \"/home\" ¿W¥ß¹º¤À¤@­Ó¤À³Î°Ï¨Ï¥Î¡C¨º³o­Ó±¡ªp¡A¨Ï¥ÎªÌ \"/home\"¤À³Î°Ï\n"
-"¤W­±¦s©ñ³\¦hªº¸ê®Æ¡A¨º±z´N¿ï¾Ü¤£»Ý­n­«·s®æ¦¡¤Æ¡C\n"
-"\n"
-"·í±z­n¿ï¾Ü­n®æ¦¡¤Æªº¤À³Î°Ï®É¡A½Ð¤p¤ß¿ï¾Ü¡A¦]¬°¿ï¿ùªº¸Ü¡A±zªº¸ê®Æ±N·|¤@¥h\n"
-"µL¦^¡A¦A¤]µLªk±Ï¦^¨Ó¤F¡A¦]¦¹±z­n¯S§O¤p¤ß¿ï¾Ü¡C\n"
-"\n"
-"·í±z¿ï¾Ü¦n«á¡A½ÐÂI¿ï \"½T©w\"¡A¦w¸Ëµ{¦¡·|¶i¦æ®æ¦¡¤Æªº°Ê§@¡C\n"
-"\n"
-"­Y¬O±zÂI¿ï¤F \"¨ú®ø\"¡A¨º±N·|·|¨ì¥ý«eªº¾Þ§@¨BÆJ¡AÄ~Äò¿ï¾Ü­n¦w¸Ëªº¤À³Î°Ï\n"
-"\n"
-"°²³]±zÂI¿ï¤F \"¶i¶¥\" ªº¶µ¥Ø«á¡A±N·|´£¨Ñ¬O§_­n¶i¦æÃa­y±½´y°Ê§@ªº¿ï¶µ¡C"
-
-#: ../../help.pm_.c:376
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"¥Ø«e Mandrake Linux ¨t²Î¥¿¦b¶i¦æ¦w¸Ë¡Aµø±zªº¹q¸£°t³Æ»P©Ò¿ï¨ú¦w¸Ë®M¥ó\n"
-"¼Æ¶qªº¦h¹è¡A³o±N·|¨M©w­n¨Ï¥Î¦h¤Ö®É¶¡¨Ó§¹¦¨³o­Ó¦w¸Ë¡C\n"
-"½Ð­@¤ßµ¥­Ô..."
-
-#: ../../help.pm_.c:384
-msgid ""
-"Before continuing you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click the\n"
-"\"Accept\" button."
-msgstr ""
-"¦A¶i¦æ¤U­±°Ê§@«e¡A±z¤w¸g¥J²Óªº¾\Ū¤U­±¬ÛÃöª©Åv±ø´Ú¡C³o¥]§t¾ã­Ó Mandrake \n"
-"Linux Distrubtion ª©Åv¤º®e¡A¦Ó­Y¬O±z¤£¦P·N¤º¤å©Ò´£¤Îªº¬ÛÃöª©Åv±ø´Ú«Å§i¡A\n"
-"±z¥i¥HÂI¿ï \"©Úµ´\" «ö¶s©ñ±ó¡A¦w¸Ëµ{¦¡±N·|¥ß§Yµ²§ô¡C­Y¬O±z±µ¨üªº¸Ü¡A¥i¥H\n"
-"ÂI¿ï \"±µ¨ü\" «ö¶s¥H«K©óÄ~Äò¶i¦æ¤U­±ªº¦w¸Ë¡C"
-
-#: ../../help.pm_.c:391
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expenses of\n"
-"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
-"get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"³o­Ó¶¥¬q¡A¨ì¤F·Ç³Æ¿ï¾Ü¨t²Î¦w¥þµ¥¯Åªº¶µ¥Ø®É­Ô¡C¤@¯ë¨Ó»¡¡A­Y¬O¾÷¾¹Àô¹Ò¶V\n"
-"¼ÉÅS©óÀô¹Ò¤U¡A¸Ì­±©ÒÀx¦sªº¸ê®Æ´N¤ñ¸û¦³¦w¥þ©Êªº°ÝÃD¦Ò¶q¡C¬Û¹ï¨Ó»¡¡A¨t²Î\n"
-"©Ò¨Ï¥Îªº¦w¸Ëµ¥¯Å¤]´NÀ³¸Ó¶V°ª¡A¥H«K©ó¸ê®Æ«O¦s·|¤ñ¸û¦w¥þ¡C½Ð¾\Ū°Ñ¦Ò¤â¥U¤º\n"
-"Ãö©ó MSEC ³¹¸`ªº¤º®e¡A¥H«K©ó¨ú±o§ó¦h³o¤è­±ªº¬ÛÃö¸ê°T¡C\n"
-"\n"
-"­Y¬O±z¤£ª¾¹D¸Ó¦p¦ó¿ï¾Üªº¸Ü¡A¨Ï¥Î¹w³]­È´N¥i¥H¤F¡C"
-
-#: ../../help.pm_.c:401
-msgid ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Reload\": you can use this option if you wish to undo all changes and\n"
-"load your initial partitions table.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Restore from floppy\": this option will allow you to restore a\n"
-"previously saved partition table from floppy disk.\n"
-"\n"
-" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
-"later partition-table recovery if necessary. It is strongly recommended to\n"
-"perform this step.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"¦b³o­Ó¶¥¬q¡A±z»Ý­n¿ï¾Ü­n¥Î¨Ó¦w¸Ë Mandrake Linux ¨t²Îªº¤À³Î°Ï¡C±z¥i¥H\n"
-"­«·s¹º¤À·sªº¤À³Î°Ï¨Ó¨Ï¥Î¡A©ÎªÌ¬O¨Ï¥Î­ì¥»¤w¸g¹º¤À¦nªº´N¦³¤À³Î°Ï¡C\n"
-"\n"
-"­n«Ø¥ß·s¤À³Î°Ï¡A±z»Ý­n¥ý¿ï¾Ü¤@¥xµwºÐ¶i¦æ¾Þ§@¡C¤ñ¤è¿ï¨ú \"hda\"¡B\n"
-"\"hdb\"³oÃþ IDE µwºÐ¸Ë¸m¡A©ÎªÌ¬O \"sda\" .. µ¥ SCSI µwºÐ¸Ë¸m¡C\n"
-"\n"
-"¶i¦æ¤À³Îªº°Ê§@¡A¦b±z¿ï¦n¤@¥xµwºÐ¸Ë¸m«á¡A±z¦³³o¨Ç¶µ¥Ø¥i¥H¨Ï¥Î:\n"
-"\n"
-" * \"²M°£¥þ³¡\" : ³o­Ó¶µ¥Ø±N·|§â©Ò¿ï¨úªºµwºÐ¤W©Ò¦³¤À³Î°Ï³£²M°£±¼¡C\n"
-"\n"
-" * \"¦Û°Ê°t¸m\" : ³o­Ó¶µ¥Ø±N·|¦Û°Ê§ä´M©Ò¿ï¨úªºµwºÐ³Ñ¾l¥i¥ÎªºªÅ¶¡¡A\n"
-"¦Û°Ê¹º¤À¥X Ext2 »P swap ¤À³Î°Ï¶i¦æ¦w¸Ë¨Ï¥Î¡C\n"
-"\n"
-" * \"±Ï´©¤À³Î°Ï\" : ¦pªG±zªº¤À³Î°Ï·´·l¤F¡A¤]³\±z¥i¥H¨Ï¥Î³o­Ó¶µ¥Ø¶i¦æ\n"
-"«æ±Ïªº°Ê§@¡C¤£¹L½Ð¤p¤ß¨Ï¥Î³o­Ó¶µ¥Ø¡A¥HÁקK§ó¦h¿ù»~µo¥Í¡C\n"
-"\n"
-" * \"´_­ì\": ¨ú®ø­è­èªººÏºÐ¤À³Îªº¹º¤À¾Þ§@ªºÅܧó¡C\n"
-"\n"
-" * \"­«Åª\" : ­n©ñ±ó­è­è¹ïºÏºÐ¥ô¦ó¹º¤À°Ê§@¡A¨Ã¦^¨ì³Ì­ì¥»ª¬ºA¡A\n"
-"Åýµ{¦¡­«·sŪ¨ú±z³Ì­ì¥»ªºª¬ºA¡C\n"
-"\n"
-" * \"ºëÆF\" : ¦pªG±z§Æ±æ¥Ñµ{¦¡À°±z¦Û°Ê¤À°tºÏºÐ¤À³Îªº¸Ü¡A¥i¥H\n"
-"¨Ï¥Î¸Ó¶µ¥Ø¡C¤@¯ë«Øijµ¹ªì¾ÇªÌ¨Ó¨Ï¥Î¡C\n"
-"\n"
-" * \"¸ü¤J³nºÐ¤¤ªº³]©w­È\" : ³o­Ó¶µ¥Ø¯à°÷¦^¦s¥ý«eÀx¦s¦bºÏ¤ùªº\n"
-"µwºÐªº¤À³Îªí¹º¤Àª¬ºA\n"
-"\n"
-" * \"Àx¦s¦ÜºÏ¤ù\" : §â¥Ø«e¤À³Îªí¹º¤Àª¬ºAÀx¦s¨ìºÏ¤ù¤º¡A¥H«K©ó¦b¬Y¨Ç\n"
-"Àô¹Ò¤U¥i¥H¥Î¨Ó«æ±Ï´_­ì¡C«Øij§A­Y¬O¤£¼ô±xºÏºÐ¹º¤À¡A¥i¥H¦h§Q¥Î³o­Ó¶µ¥Ø¡C\n"
-"\n"
-" * \"§¹¦¨\" : ·í±z§¹¦¨ºÏºÐ¹º¤À°Ê§@®É¡A½Ð¿ï¾Ü³o­Ó¶µ¥Ø¡A¥H«K©ó§â¥Ø«e¤À³Î\n"
-"ªºµ²ªG¼g¤J¨ìµwºÐ§ó·s¡C\n"
-"\n"
-"½Ðª`·N: ³oÃä±z¥i¥H¦h§Q¥Î [Tab] »P [Up/Down] Áä¨Ó©¹ªðºÏºÐ¤À³Îµe­±¾Þ§@¡C\n"
-"\n"
-"·í¿ï¨ú¦n¤@­Ó¤À³Î°Ï®É¡A±z¥i¥H¨Ï¥Î:\n"
-"\n"
-" * Ctrl-c : «Ø¥ß¤@­Ó·s¤À³Î°Ï (·íªÅªº¤À³Î°Ï³Q¿ï¨ú®É¨Ï¥Î);\n"
-"\n"
-" * Ctrl-d : §R°£¸Ó¤À³Î°Ï;\n"
-"\n"
-" * Ctrl-m : ³]©w¸Ó¤À³Î°Ïªº±¾¸üÂI¡C\n"
-"\n"
-"¦pªG±z¬O¨Ï¥Î PowerPC ªº¾÷¾¹¡A±z»Ý­n«Øij¤@­Ó¤j¬ù 1MB ªº HFS ¤À³Î°Ï§@¬°\n"
-"yaboot ¶}¾÷µ{¦¡¨Ï¥Î¡A¥H«K©ó¯à°÷Åý yaboot ¶}¾÷µ{¦¡¯à°÷±Ò°Ê Linux ¨t²Î¡C\n"
-"·íµM¡A¤@¯ë§Ú­Ì«Øij¡A±z¥i¥HÅý³o¶ô«O¯dªº¤À³Î°Ï¦³¤j¤@ÂIªºªÅ¶¡¡A¤ñ¤è«O¯d\n"
-"¤@¶ô 20M ªº¤À³Î°Ï¡A¨º±z´N¯à°÷¦b¸Ó¤À³Î°Ï¤W©ñ¸m³\¦h¥÷ªº¶}¾÷®Ö¤ß¬ÛÃöÀÉ®×\n"
-"¨Ó¨Ï¥Î¡C"
-
-#: ../../help.pm_.c:460
-msgid ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"¥Ø«e°»´ú¨ì±zªºµwºÐ¤W¦³¦h­Ó Windows ¤À³Î°Ï¡A½Ð¿ï¾Ü±z§Æ±æ­nÁY¤p Windows\n"
-"ªº¤À³Î°Ï¡A¥H«K©ó§âªÅ¶¡®¿¥X¨Ó¦w¸Ë Mandrake Linux §@·~¨t²Î¡C\n"
-"\n"
-"¨C­Ó¤À³Î°Ï³£¦C¥X¤F¹³¬O: \"Linux ¦WºÙ\", \"Windows ¦WºÙ\", \"®e¶q\"¡C\n"
-"\n"
-"\"Linux ¦WºÙ\" ¬O¦³µ²ºc©Êªº: \"µwºÐ«¬ºA\", \"µwºÐ½s¸¹\",\"¤À³Î°Ï½s¸¹\"\n"
-"(¤ñ¤è¹³¬O: \"hda1\")¡C\n"
-"\n"
-"\"µwºÐ«¬ºA\" ´N¬O¡A­Y±z¨Ï¥Îªº¬O IDE µwºÐ¡A·|Åã¥Ü \"hd\", ­Y¬O SCSI µwºÐ\n"
-"ªº¸Ü¡A´N¬OÅã¥Ü \"sd\"¡C\n"
-"\n"
-"\"µwºÐ½s¸¹\" ´N¬O¦b \"hd\" ©ÎªÌ¬O \"sd\" «á­±ªº¦r¥À¡C¥H IDE µwºÐ¸Ë¸m¨Ó»¡\n"
-"¨ä·N¸q¬°:\n"
-"\n"
-" * \"a\" ³o¬O«ü \"primary IDE controller ¤W²Ä¤@¥x (master) µwºÐ\",\n"
-"\n"
-" * \"b\" ³o¬O«ü \"primmary IDE controller ¤W²Ä¤G¥x (slave) µwºÐ\",\n"
-"\n"
-" * \"c\" ³o¬O«ü \"secondary IDE controller ¤W²Ä¤@¥x (master) µwºÐ\",\n"
-"\n"
-" * \"d\" ³o¬O«ü \"secondary IDE controller ¤W²Ä¤G¥x (slave) µwºÐ\"¡C\n"
-"\n"
-"¥H SCSI µwºÐ¨Ó»¡¡A\"a\" ´N¬O«ü \"SCSI IDE ½s¸¹³Ì¤pªº¨º¤@¥x\", \"b\"\n"
-"´N¬O«ü \"SCSI IDE ½s¸¹¬°¤Gªº¨º¤@¥xµwºÐ\"¡AµM«á¨Ì¦¹Ãþ±À¤U¥h.....\n"
-"\n"
-"\"Windows ¦WºÙ\" ´N¬O¦b Windows ¤UªººÏºÐ¾÷¥N¸¹¦WºÙ¡A¤ñ¤è¹³¬O \"C:\" ¡C"
-
-#: ../../help.pm_.c:491
-msgid "Please be patient. This operation can take several minutes."
-msgstr "½Ðµy«á¡A³o­Ó¨BÆJ¯à°÷»Ý­nªá¶O¤@¨Ç®É¶¡¤~¯à°÷°õ¦æ§¹²¦¡C"
-
-#: ../../help.pm_.c:494
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You also\n"
-"have the choice of performing a new install or an upgrade of an existing\n"
-"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
-"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
-"existing system.\n"
-"\n"
-"Please choose \"Install\" if there are no previous version of Mandrake\n"
-"Linux installed or if you wish to boot between various operating systems.\n"
-"\n"
-"Please choose \"Update\" if you wish to update or repair an already\n"
-"installed version of Mandrake Linux.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, please choose one of the\n"
-"following to install or update your Mandrake Linux operating system:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions.\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
-"this unless you know what you are doing."
-msgstr ""
-"³o¸Ì¡A±z»Ý­n¨M©w¤@­Ó¦w¸Ëªº¼Ò¦¡¡A¤ñ¤è§A§Æ±æ¨Ï¥Î¹w³] (\"«Øij­È\") ©ÎªÌ¬O\n"
-"¨Ï¥Î¤ñ¸û¦³¦Û¥DÅv (\"±M®a¼Ò¦¡\") ¼Ò¦¡¶i¦æ¦w¸Ë¡CµM«á±µ¤U¨Ó±zÁÙ­n¿ï¾Ü±z¬O¡A\n"
-"¦w¸Ë¤@®M¥þ·sªº Mandrake Linux ¨t²Îªº¸Ü¡A½Ð¿ï¾Ü \"¦w¸Ë\";­Y¬O±z­ì¥»µwºÐ\n"
-"´N¤w¸g¦³Âª©¨t²Îªº¸Ü¡A½Ð¿ï¾Ü \"¤É¯Å\"¡C\n"
-"¿ï¾Ü \"¦w¸Ë\" ¡A·í±z¥´ºâ¦w¸Ë¤@®M¥þ·sªº Mandrake Linux ¨t²Îªº¸Ü¡A¥i¥H\n"
-"¿ï¾Ü³o­Ó¶µ¥Ø¡C\n"
-"\n"
-"¿ï¾Ü \"¤É¯Å\" ¡A·í±zªºµwºÐ¤w¸g¦³¦w¸Ë¹Lª©¥»ªº Mandrake Linux ¨t²Îªº¸Ü¡A\n"
-"±z¥i¥H¿ï¾Ü³o­Ó¶µ¥Ø¡C\n"
-"\n"
-"¨Ì·Ó±z¹ï©ó GNU/Linux ªº»{ÃѼô±xµ{«×¨Ó¬Ý¡A±z¥i¥H¨Ï¥Î¤U­±ªº¼Ò¦¡¨Ó¶i¦æ²Î\n"
-"ªº¦w¸Ë©ÎªÌ¬O¤É¯Åªº¨BÆJ:\n"
-"\n"
-" * «Øij­È : ¦pªG±z¨S¦w¸Ë¹L GNU/Linux §@·~¨t²Î¡A½Ð¿ï¾Ü³o­Ó¶µ¥Ø¡A¾ã­Ó¦w¸Ë\n"
-"¹Lµ{±N·|¬Û·í»´ÃP²³æ¡AµM«á¤]¥u·|°Ý±z´X­Ó°ÝÃD´N¥i¥H§â¾ã­Ó¨t²Î¦w¸Ë§´·í¡C\n"
-"\n"
-"\n"
-" * ±M®a«¬: ¦pªG±z¥»¨­¦³±µÄ²¹L Linux ¨t²Î¡A¬Æ¦Ü¹ï³o­Ó¨t²Î¬Û·í¼ô±xªº¸Ü¡A\n"
-"±z¥i¥H¿ï¾Ü³o­Ó¦w¸Ë¼Ò¦¡¡C·í±z¨Ï¥Î±M®a¼Ò¦¡¦w¸Ë®É¡A¦w¸Ëµ{¦¡·|Åý±z§¹¥þªº \n"
-"¾Þ±±¾ã­Ó¨t²Î¦w¸Ë¨BÆJ¡C¨Ï¥Î¸Ó¼Ò¦¡«á¡A¦w¸Ë¹Lµ{³°Äò¥i¯à·|¥X²{«Ü¦h°ÝÃD­n\n"
-"±z¥h¦^µª¡A­Y¬O±z¤£¬O«Ü¯à°÷¾r¶¿³o¨Ç¸ß°Ýªº¸Ü¡A«Øij±z°£«D±zª¾¹D±z©Ò¿ï¾Ü\n"
-"ªº¶µ¥Ø¥Nªí·N¸q¬°¦ó¡A­n¤£µM½Ð¨Ï¥Î¹w³]­È¦Ó¤£­n¦A¥h¿ï¨ú¬ÛÃö³]©w¶µ¥Ø¡C"
-
-#: ../../help.pm_.c:521
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"¥¿±`±¡ªp¨Ó»¡¡ADrakX ¯à°÷¥¿½Tªº¨Ì·Ó±z¿ï¾Üªº»y¨t¡A¦Û°Ê°»´ú±z¨t²ÎªºÁä½L,\n"
-"©Ò¥H±z¤£·|·|¬Ý¨ì³o­Ó¨BÆJªº³]©w¡C¦ý¬O¡A­Y¬O±z¦³¯S®íªºÀô¹Ò»Ý¨D¡A³oÃä´N\n"
-"¯à°÷Åý±z¿ï¾Ü¡C\n"
-"\n"
-"½ÐÂI¿ï \"§ó¦h\" «ö¶s¡A¥H«K©ó¿ï¾Ü±z©Ò»Ý­n¨Ï¥ÎªºÁä½L¶µ¥Ø¡C"
-
-#: ../../help.pm_.c:534
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-msgstr ""
-"½Ð¿ï¨ú±z¦w¸Ë¹Lµ{©Ò­n¨Ï¥Îªº»y¨t¡CÂI¿ï \"¶i¶¥\" «ö¶s¥i¥HÅý±z¿ï¨ú¨ä¥L»y¨t¡A\n"
-"¸Ó¿ï¨úªº»y¨t±N·|¤@¦P¦w¸Ë¨ì¨t²Î¤º¡C\n"
-"·í§A¿ï¾Ü¦w¸Ë©Ò»Ý­nªº»y¨t¶µ¥Ø«á¡A¨t²Î±N·|¦w¸Ë¤Wµ¹¨t²Î¤å¥ó¡BÀ³¥Îµ{¦¡©Ò¨Ï¥Î\n"
-"ªº¬ÛÃö»y¨t¸ê®Æ¡A³o·N¨ýµÛ·í±z¤Á´«¨ì¸Ó»y¨tÀô¹Ò®É¡A´N¯à°÷¨Ï¥Î¸Ó»y¨t©w¸qªº\n"
-"Àô¹Ò¡BÅã¥Ü¡B¿é¤J¶i¦æ¤@¯ë¨t²Î¾Þ§@¨Ï¥Î¡C\n"
-"\n"
-"·í±z¿ï¾Ü¦n¤F¤§«á¡A½ÐÂI¿ï \"½T©w\" «ö¶sÄ~Äò¡C"
-
-#: ../../help.pm_.c:547
-msgid ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"RETURN to \"Cancel\" and choose again."
-msgstr ""
-"¹w³]ªº±¡ªp¡ADrakX µ{¦¡·|¹w³]±z¨t²Î¥u¦³¨â­Ó«ö¶s¦¡ªº·Æ¹«¡A¨Ã¦Û°Ê¿ï¾Ü¼ÒÀÀ\n"
-"¤TÁ䪺¥\¯à¡C¦¹¥~¡ADrakX ¤]¯à°÷«Ü¦Û°Ê¤Æªº°»´ú¨ì±z¨t²Î¨Ï¥Îªº·Æ¹«¬OÄÝ©ó\n"
-"§Ç¦C¡BPS/2 ©ÎªÌ¬O USB ³W®æªº·Æ¹«Ãþ«¬¡C\n"
-"\n"
-"¦pªG¹w³]ªº¶µ¥Ø¤£¬O§A©Ò¹w´Áªº¡A±z¥i¥H¥Ñ¤U­±²M³æ¦Cªí¿ï¾Ü±z©Ò­n¨Ï¥Îªº·Æ¹«\n"
-"Ãþ«¬¡C\n"
-"·í§A¿ï¾Ü«D¦w¸Ëµ{¦¡¹w³]ªº·Æ¹«¶µ¥Ø®É¡Aµ¥µ¥·|¦³¤@­Ó·Æ¹«´ú¸Õªºµe­±¡A±z¥i¥H\n"
-"¦b¸Ó³B´ú¸Õ·Æ¹«¬O§_¥i¥H¥¿±`¨Ï¥Î¡A¥H«K©ó½T»{±z¿ï¾Üªº¶µ¥Ø¥¿½TµL»~¡C­Y¬O±z\n"
-"¿ï¾Üªº¶µ¥ØµLªk¥¿±`¤u§@¡A¨Ï¥ÎÁä½L«ö¤UªÅ¥ÕÁä©ÎªÌ¬O Enter Áä¡AµM«á¿ï¾Ü \n"
-"\"¨ú®ø\" ¦^¨ì·Æ¹«¿ï¾Ü¶µ¥Ø§Y¥i¡C"
-
-#: ../../help.pm_.c:560
-msgid ""
-"Please select the correct port. For example, the COM1 port under MS Windows\n"
-"is named ttyS0 under GNU/Linux."
-msgstr ""
-"½Ð¿ï¾Ü¥¿½Tªº³sµ²°ð¦WºÙ¡C¤ñ¤è¡AMS Windows ©ÒºÙ©Iªº COM1¡A¦b GNU/Linux Àô¹Ò\n"
-"¬O¨Ï¥Î ttyS0 ªº©R¦W¤è¦¡¡C"
-
-#: ../../help.pm_.c:564
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
-"choose not to enter a password, but we strongly advise you against this if\n"
-"only for one reason: do not think that because you booted GNU/Linux that\n"
-"your other operating systems are safe from mistakes. Since \"root\" can\n"
-"overcome all limitations and unintentionally erase all data on partitions\n"
-"by carelessly accessing the partitions themselves, it is important for it\n"
-"to be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password - it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"\"incorrect\" password will have to be used the first time you connect.\n"
-"\n"
-"In expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"³oÃä¬OÃö©ó GNU/Linux ¨t²Î¦w¥þ³]©w: §A»Ý­n³]©w¨t²ÎºÞ²z­û root ªº±K½X¡C\n"
-"root ¬O¨t²ÎªººÞ²zªÌ¡A¦³³Ì°ªªº¨t²ÎÅv­­¡A¨ã³Æ¦¹Åv­­ªº¤H¡A¯à°÷§¹¥þªº±±ºÞ\n"
-"³]©w¨t²Îªº©Ò¦³¹B§@¡C¤ñ¤è¹³¬O«Ø¥ß±b¸¹¡A§ó·s¨t²Î®M¥ó¡AºÞ²z¾ã­ÓÀɮרt²Îµ¥µ¥¡C\n"
-"«Øij±z³]©w root ¨t²ÎºÞ²zªÌªº±K½X®É¡A¸Ó±K½X¤£­n¹L©ó²³æ¡A¥H§K®e©ö¾D¨ì¥L¤H\n"
-"±ÀºV¥X¨Ó«á´c·N¯}Ãa±zªº¨t²Î¡C³oÃä³]©w±K½X®É¡A­Y¬O±K½X¹L©ó²³æ©ÎªÌ¬O¦³³W«h\n"
-"©Êªº¸Ü¡Aµ{¦¡±N·|ĵ§i±z»Ý­n­«·s¦A¿é¤J¤@¹M¡C\n"
-"\n"
-"±K½X¥i¥H¥]§t¤@¯ë¥i¨£ªº­^¤å¦r¥À¦r¤¸¡A¥]§t­^¤å¦r¥À¦r¤¸¡BªÅ¥Õ¡B¼Æ¦rµ¥¡A\n"
-"¥i¥]§t¤j¤p¼g²V¦Xªº¿é¤J¡C¦¹¥~¡A±K½Xªø«×«Øij¦Ü¤Ö¦³ 8 ­Ó¦r¤¸©ÎªÌ§ó¦h¡C¦A¨Ó´N¬O¤£"
-"­n§â¨t²ÎºÞ²z­ûªº±K½X¼g¦b¯È¤W©ÎªÌ¬O¬ö¿ý©ó¹q¸£¤W¡A¦]¬°¥i¯à¦³\n"
-"³QÅѨú¡B°½¿sµ¥ªº±¡ªpµo¥Í¡C\n"
-"\n"
-"·íµM¡A±K½X¤]¤£¥Î¨úªº¤Óªø¡A¦]¬°¤Óªø¥i¯à®e©ö§Ñ°O¡A¬Æ¦Ü¬O¿é¤J®É®e©ö¦³¿ù»~¡C\n"
-"\n"
-"±z¦b¿é¤J±K½X®É¡A¿Ã¹õ¤W¤£·|Åã¥Ü¥X§A¹ê»ÚºV¤Jªº¤º®e¡C¥t¥~´N¬O±z»Ý­n¿é¤J¨â¦¸\n"
-"¥H«K©ó½T©w©Ò¿é¤Jªº±K½X¨S¦³¥´¿ù¡C\n"
-"\n"
-"¦b±M®a¼Ò¦¡¦w¸ËªºÀô¹Ò¡A±z¤U­±ÁÙ¥i¥H¿ï¾Ü¬O§_­n¨Ï¥Î NIS¡BLDAP µ¥ªº¦øªA¾¹\n"
-"³sµ²§@¬°±b¸¹»{ÃÒªº¤è¦¡¡C\n"
-"\n"
-"Ãö©ó LDAP¡BNIS »{ÃÒªº¤è¦¡¡A­Y¬O§Aª¾¹D±z©Ò¦bºô¸ô¦³¨Ï¥Î³oÃþ»{ÃҤ覡ªº¸Ü¡A\n"
-"±z¤]³\»Ý­n¦Vºô¸ôºÞ²zªÌ¸ß°Ý¬ÛÃö¸ê°T¥H«K©ó¯à°÷³]©w¨Ï¥Î¡C\n"
-"\n"
-"­Y¬O»{ÃҤ覡´N¬O³æ¯Â¸Ó¹q¸£¤Wªº±b¸¹¤è¦¡¡A¿ï¾Ü¨Ï¥Î¥»¦aºÝ±K½XÀɮ׶µ¥Ø§Y¥i¡C"
-
-#: ../../help.pm_.c:600
-msgid ""
-"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
-"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
-"boot\n"
-"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-"one;\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"GRUB\": if you prefer GRUB (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-msgstr ""
-"LILO »P GRUB ³£¬O GNU/Linux ªº¶}¾÷±Ò°Êµ{¦¡¡C¤@¯ë¨Ó»¡¡A³o­Ó³]©w¶¥¬q¬O\n"
-"¥þ¦Û°Êªº¡C¨Æ¹ê¤W¡ADrakX ·|¤ÀªR¨t²Î·~ºÐ¶}¾÷ºÏ°Ï¤W­±ªº¤º®e¡A¨Ó¨M©w¤@¨Ç¨Æ±¡:\n"
-"\n"
-" * ­Y¬O¦³§ä¨ì Windows ªº¶}¾÷ºÏ°Ï¡Aµ{¦¡±N·|¨Ï¥Î GRUB/LILO µ{¦¡¥[¥H¨ú¥N¡A\n"
-"¦p¦¹¡A±z´N¥i¥H¨Ï¥Î GRUB ©ÎªÌ¬O LILO ¶}¾÷µ{¦¡¨Ó±Ò°Ê Linux ¨t²Î¡A¬Æ¦Ü¬O\n"
-"¥i¥H±Ò°Ê¥t¥~¤@­Ó§@·~¨t²Î (¤ñ¤è¹³¬O Windows µ¥)¡C\n"
-"\n"
-" * ¦pªG¦b¶}¾÷ºÏ°Ï¤W¤w¸g§ä¨ì¤F GRUB ©ÎªÌ¬O LILO ¶}¾÷µ{¦¡¡Aµ{¦¡±N·|¨Ï¥Î·sªº\n"
-"³]©w­ÈÂл\¡A¦pªG¦w¸Ëµ{¦¡¦³µLªk¦Û°Ê³B²zªº±¡ªp¡A¥¦·|Åã¥Ü¥X¤U­±ªº¿ï¶µ¡C\n"
-"\n"
-" * \"­n¨Ï¥Î¨º­Ó¶}¾÷ºÞ²zµ{¦¡\": ±z¦³¤T¦U¶µ¥Ø¥i¥H¿ï¾Ü:\n"
-"\n"
-"    * \"¹Ï§Î¿ï³æªº LILO ¤¶­±\": ¦pªG±z§Æ±æ¨Ï¥Î¹Ï§Î¤Æªº LILO ¶}¾÷¿ï³æ¡C\n"
-"\n"
-"    * \"GRUB\": ¦pªG±z¤ñ¸û³ßÅw¨Ï¥Î GRUB (³o¬O¤å¦r¼Ò¦¡ªº¶}¾÷¿ï³æ)¡C\n"
-"\n"
-"    * \"¤å¦r¿ï³æªº LILO ¤¶­±\": ¦pªG±z§Æ±æ¨Ï¥Î¤å¦r¼Ò¦¡ªº LILO ¶}¾÷¿ï³æ¡C\n"
-"\n"
-" * \"¶}¾÷¸Ë¸m\" ³o­Ó¦a¤è¡A¤@¯ë¨Ó»¡¥i¥H¤£¥Î§ó§ï¡A¤ñ¤è¹³¬O¤@¯ë¦w¸Ë¦b\n"
-"²Ä¤@¥xµwºÐ (\"/dev/hda\") ¤W¡A±z¤]¥i¥HÅܧó¿ï¾Ü¡A¤ñ¤è¹³¬O¦w¸Ë¨ì²Ä¤G¥xµwºÐ\n"
-"(\"/dev/hdb\")¡A¬Æ¦Ü¬O¦w¸Ë¨ì³nºÐ (\"/dev/fd0\") ³£¬O¥i¦æªº¡C\n"
-"\n"
-" * \"¦b±Ò°Ê§@·~¨t²Î«e¥ý©µ¿ðªº®É¶¡\": ·í±Ò°Ê¹q¸£®É¡A·|¥ý¼È°±¤@·|®É¶¡µM«á\n"
-"Åý¨Ï¥ÎªÌ¿ï¾Ü­n±Ò°Ê¨º­Ó¶µ¥Ø¶i¦æ¶}¾÷¡C\n"
-"\n"
-"!! ½Ðª`·N¡A¦pªG±z¿ï¨ú \"¨ú®ø\" ¥´ºâ¤£¦w¸Ë¶}¾÷±Ò°Êµ{¦¡ªº¸Ü¡A±z±o½T©w±z\n"
-"¦³¿ìªk¯à°÷¦b¤U¦¸­«·s±Ò°Ê¹q¸£«á¯à°÷¶i¤J Mandrake Linux ¨t²ÎÀô¹Ò¡C¦]¦¹¡A\n"
-"·í§A­n¿ï¾Ü¨ú®ø³o­Ó¦w¸Ë¶µ¥Ø«e¡A½Ð¤T«ä!!!\n"
-"\n"
-"±z¥i¥HÂI¿ï \"¶i¶¥\" «ö¶s¡A±z±N¦³§ó¦hµ¹±M®aµ¥¯Å¨Ï¥ÎªÌ©Ò¨Ï¥Îªº¶i¶¥¿ï¶µ¡C\n"
-"\n"
-"Mandrake Linux ¦w¸Ëµ{¦¡±N·|§â¶}¾÷ºÞ²zµ{¦¡¦w¸Ë¨ì¨t²Î¤º¡A¦p¦¹±z´N¯à°÷³z¹L\n"
-"³o­Ó¶}¾÷ºÞ²zµ{¦¡±Ò°Ê±z¹q¸£ªº GNU/Linux Àô¹Ò¡A¬Æ¦Ü¬O¨ä¥L¤w¸g¦w¸Ë©ó²Îªº\n"
-"§@·~¨t²ÎÀô¹Ò¡C\n"
-"\n"
-"·í¦w¸Ëµ{¦¡°»´ú¨ì±z¨t²Î¤w¸g¦³¦w¸Ë¤F¨ä¥L§@·~¨t²Î¡A±Ò°Ê¸Ó§@·~¨t²Îªº¶µ¥Ø±N·|\n"
-"¦Û°Êªº¥[¤J¶}¾÷¿ï³æ¤º¡A¨Ã¥]§t¤â°Ê·s¼W¶}¾÷¶µ¥Ø»P­×§ï¶}¾÷¶µ¥Øªº¤º®e³]©w¡C\n"
-"±z¥i¥H¦bÅã¥Ü¥X¥i¨Ñ¿ï¾Ü¶}¾÷¶µ¥Ø¤W§Ö³tÂI¨â¦¸Åܧ󤺮e¬Æ¦Ü¬O§R°£¸Ó±Ò°Ê¶µ¥Ø;\n"
-"¨Ï¥Î \"·s¼W\" ¨Ó«Ø¥ß¶}¾÷¶µ¥Ø¤º®e; µM«áÂI¿ï \"§¹¦¨\" ¥H«K©óÄ~Äò¶i¦æ¤U­±\n"
-"ªº¦w¸Ë¶µ¥Ø¡C"
-
-#: ../../help.pm_.c:647
-msgid ""
-"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) »P GRUB ³oÃþ³£¬O Linux ªº¶}¾÷®Ö¤ß¸ü¤Jµ{¦¡¡A³oÃþ\n"
-"µ{¦¡¥»¨­°£¤F¯à°÷¥Î¨Ó¸ü¤J Linux ®Ö¤ß¶i¤J Linux ¨t²Î¡A¤]¨ã³Æ¯à°÷¥Î¨Ó±Ò°Ê\n"
-"¨ä¥L§@·~¨t²Î¡A¤ñ¤è¹³¬O DOS¡BWindows µ¥¡C§Ú­Ì±N·|°»´ú±z¥Ø«e¹q¸£¤W¤w¸g\n"
-"¦w¸Ë¦nªº§@·~¨t²Î¡A¨Ã³]©w¦n³oÃþ¶}¾÷µ{¦¡¯à°÷Åý±z©ó¶}¾÷®É¿ï¾Ü­n±Ò°Ê§A§Æ±æ\n"
-"­n¶i¤Jªº§@·~¨t²ÎÀô¹Ò¡C­Y¬O§A¨t²Î¦³¦w¸Ë¬Y­Ó§@·~¨t²Î¡A¦ý¬O³oÃä¨Ã¨S¦³°»´ú\n"
-"¥X¨Óªº¸Ü¡A±z¥i¥H©ó³oÃä¥Î¤â°Êªº¤è¦¡¨Ó·s¼W¤@­Ó±Ò°Ê¶µ¥Ø¡C\n"
-"\n"
-"¥Ø«e°»´ú¦C¥Xªº¶µ¥Ø³¡¥÷¡A­Y¬O§A¥´ºâ§R°£¨ä¤¤´X­Ó±Ò°Êªº¶µ¥Øªº¸Ü¡A¨º±z±N·|\n"
-"¥¢¥h¯à°÷¨Ï¥Î¸Ó¶µ¥Ø¶i¦æªº¶}¾÷¥\¯à¡C³o­Ó±¡ªp¤U¡A·í§A§R°£¨ä¤¤¤@­Ó±Ò°Ê¶µ¥Ø\n"
-"«á¡A«áÄò§A¤]³\´N»Ý­n¨Ï¥Î¸Ó§@·~¨t²Îªº¶}¾÷¤ù¤~¯à°÷¶i¤J³o­Ó§@·~¨t²Î¤F!"
-
-#: ../../help.pm_.c:658
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"±z¥²¶·­n«ü©w©ñ Linux ¶}¾÷µ{¦¡ªº¦ì¸m¡C\n"
-"\n"
-"°£«D±z«Ü²M·¡±z¦b°µ¤°»ò¡A§_«h³£À³¸Ó¿ï¨ú \"µwºÐªº²Ä¤@­ÓºÏ°Ï (MBR)\"¡C"
-
-#: ../../help.pm_.c:665
-msgid ""
-"Here we select a printing system for your computer to use. Other OSes may\n"
-"offer you one, but Mandrake offers three.\n"
-"\n"
-" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
-"a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have any networked printers. It will handle\n"
-"only very simple network cases and is somewhat slow for networks. Pick\n"
-"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
-"choices after install by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
-"your local printer and also halfway round the planet. It is simple and can\n"
-"act like a server or a client for the ancient \"lpd\" printing system, so\n"
-"it is compatible with the systems that went before. It can do many tricks,\n"
-"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
-"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
-"it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"³o¸Ì±N­n¿ï¾Ü©Ò­n¨Ï¥Îªº¦C¦LªA°È¨t²Î¶µ¥Ø¡AMandrake Linux ³oÃä´£¨Ñ¤F¤TºØ¨Ñ±z\n"
-"¿ï¾Üªº¶µ¥Ø¡C\n"
-"\n"
-" * \"pdq\" - pdq ¨ä¹ê´N¬O ``print, don't queue'' ªºÁY¼g¡C¤@¯ë³o­Ó¦C¦L\n"
-"ªA°Èµ{¦¡¯à°÷¦b¦Lªí¾÷¬Oª½±µ³sµ²¨ì¥»¾÷¹q¸£¤W«Ü§Ö³tªº¦C¦L¡A¥t¥~¦b¤p«¬Â²³æ¡A\n"
-"¦Ó¥B³t«×¤£§Öªººô¸ô¤W¨Ó¨Ï¥Î¤]¬Û·í«K§Q¡C³o­Ó¶µ¥Ø¡A¥]§t¤U­±¥i¨Ñ¿ï¾Üªº¦C¦L\n"
-"¨t²Î¡A³£¥i¥H¨Æ«á¨Ï¥Î PrinterDrake µ{¦¡¡AµM«á¨Ï¥Î±M®a¼Ò¦¡´N¥i¥HÅܧó³]©w¡C\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System''¡A³o¬O¤@®M­Ó¬Û·í¦nªº¦C¦L\n"
-"ªA°È¨t²Î¡A¹ï©óª½±µ³s½u¦w¸Ë¦b¥»¾÷¤W¡A©ÎªÌ¬O¤@¯ëºô¸ô¨Ï¥Î¤W³£¬Û·í¤£¿ù¡C\n"
-"³o­ÓªA°Èµ{¦¡¬Û·í²³æ¡A¤]¯à°÷¥Î¨Ï¥Î lpd ªº Server ºÝ©ÎªÌ¬O Client ºÝ\n"
-"³£¯à°÷¬Û®e¨Ï¥Î¡C³o­Óµ{¦¡´£¨Ñ³\¦h¥\¯à¾÷¨î¡A¨Ï¥Î³]©w¤W¤]¯à°÷¹³¬O \"pdq\"\n"
-"µ{¦¡ªºÂ²³æ¡C¦pªG±z§Æ±æ¯à°÷Åý CUPS ¯à°÷¼ÒÀÀ \"lpd\" ªA°Èµ{¦¡¥\¯àªº¸Ü¡A\n"
-"±z»Ý­n¶}±Ò \"cups-lpd\" ³o­ÓªA°Èµ{¦¡¡C¥t¥~¡A¥¦´£¨Ñ¤F¹Ï§Îªº¤¶­±¯à°÷Åý\n"
-"¨Ï¥ÎªÌ¿ï¾Ü­n¦C¦Lªº¦Lªí¾÷¡A¥]§t¬ÛÃö¦C¦L°Ñ¼Æªº½Õ¾ã¡C\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''¡A³o¤@®M¦C¦LªA°È\n"
-"¨t²Î¡A»P¥ý«e´£¨ìªº¶µ¥Ø³£¬O¨ã³Æ®t¤£¦hªº¥\¯à¡A¤£¹L³o­Ó¦C¦L¨t²Î¤ñ¸û¯S®íªº\n"
-"¦a¤è´N¬O¡A¦]¬°¥¦¤ä´© IPX ¨ó©w¡A©Ò¥H¯à°÷§â­n¦C¦Lªº¸ê®Æ³z¹L Novell ºô¸ô\n"
-"¦Lªí¾÷¡C¦C¦L¥X¨Ó¦pªG±z»Ý­n³z¹L Novell ºô¸ô¦Lªí¾÷¶i¦æ¦C¦Lªº°Ê§@¡A±z¥i¥H\n"
-"¦Ò¼{¨Ï¥Î³o¤@®M¦C¦L¨t²Î¡C"
-
-#: ../../help.pm_.c:693
-msgid ""
-"DrakX is now detecting any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
-"is found DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection will sometimes not detect a piece of hardware\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options that the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options that need to be passed, you\n"
-"will need to manually provide options to the driver. Please review the\n"
-"``User Guide'' (chapter 3, section \"Collecting information on your\n"
-"hardware\") for hints on retrieving the parameters required from hardware\n"
-"documentation, from the manufacturer's web site (if you have Internet\n"
-"access) or from Microsoft Windows (if you used this hardware with Windows\n"
-"on your system)."
-msgstr ""
-"DrakX µ{¦¡¥Ø«e¥¿¦b°»´ú±z¨t²Î¤Wªº IDE ¸Ë¸m¡C¦¹¥~¡A¥¦¤]·|¶¶«K±½´y¨t²Î©Ò\n"
-"¦w¸Ëªº SCSI ¤¶­±¥d¡C·í°»´ú¨ì SCSI ¥d®É¡ADrakX µ{¦¡±N·|¦Û°Ê¦w¸Ë¾A·íªº\n"
-"SCSI ÅX°Êµ{¦¡ÅX°Ê¸Ó SCSI ³]³Æ¡C\n"
-"\n"
-"¦]¬°¦w¸Ëµ{¦¡¤]³\µLªk§¹¥þªº°»´ú¥X±zªº¨t²Î¬O§_ÁÙ¦³§ó¦hªºµwÅé¸Ë¸m¡A©Ò¥H\n"
-"DrakX ·|¸ß°Ý±zªº¨t²Î¬O§_¦³ PCI SCSI ¤¶­±¥d¦s¦b¡C·í§A¿ï¾Ü \"¬Oªº\" ªº®É­Ô\n"
-"±z±N¥i¥H¤â°Ê¿ï¾Ü±z¨t²Î©Ò¦w¸Ëªº SCSI ¤¶­±¥dªº¶µ¥Ø¡C­Y¬O¨S¦³ªº¸Ü¡A¿ï¾Ü \n"
-"\"§_\" ´N¥i¥H¤F¡C­Y¬O±z¹ê¦bµLªk½T©w¦³¨º¨ÇµwÅ鶵¥Ø¦s¦b¡A±z¥i¥H¿ï¨ú\n"
-"\"À˵øµwÅé¸ê°T\" ¨ÃÂI¿ï \"½T©w\" ¦^¨ì­ì¥»µe­±¡C\n"
-"\n"
-"·í±z¨Ï¥Î¤â°Ê¤è¦¡«ü©w±z¨t²Îªº¤¶­±¥d®É¡ADrakX µ{¦¡·|¸ß°Ý±z¬O§_­n¹ï³o­Ó\n"
-"ÅX°Êµ{¦¡ÃB¥~¿é¤J¨ä¥L°Ñ¼Æ¡C±zÀ³¸Ó­n¤¹³\ DrakX ¯à°÷¥ý¦Û°Ê°»´ú¸Ó¶gÃä¸Ë¸m\n"
-"ª¬ºA¡A°£«D¯uªºµLªk°»´ú®É¤~¤â°Ê«ü©w°Ñ¼Æ¶Ç¹Fµ¹¸ÓÅX°Êµ{¦¡¡C\n"
-"\n"
-"½Ðª`·Nªº¬O¡A­Y¬O±z­n¤â°Ê«ü©w¶Ç¤Jªº°Ñ¼Æ¡A«Øij±z½Ð°Ñ¦Ò¨Ï¥Î¤â¥Uªº²Ä¤T³¹ \n"
-"(\"Collecting information on your hardware\") ¥H«K©óÀò±o§ó¦h¬ÛÃö¸ê°T¡C"
-
-#: ../../help.pm_.c:720
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OS's, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes \"live\".\n"
-"Here, you can override this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in \"novideo\" mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"±z¥i¥H¦b yaboot ¤º·s¼WÃB¥~ªº¶µ¥Ø¡A¹³¬O¥Î¨Ó±Ò°Ê¨ä¥L§@·~¨t²Î¶µ¥Ø¡B®Ö¤ß¶µ¥Ø\n"
-"©ÎªÌ¬Oĵ«æ¶}¾÷®Ö¤ßÀÉ®×µ¥¡C\n"
-"\n"
-"°w¹ï­n·s¼W¤@­Ó±Ò°Ê¨ä¥L§@·~¨t²Î¶µ¥Ø¨Ó¬Ý¡A¦Ü¤Ö­n¥]§t¤@­Ó \"¼ÐÅÒ\" »P®Ú¤À³Î°Ï\n"
-"©Ò¦b¦ì¸mªº¶µ¥Ø¡C\n"
-"\n"
-"°w¹ï Linux ¨Ó»¡¡A¦Ü¤Ö¥]§t¹³¬O:\n"
-"\n"
-" * ¼ÐÅÒ: ´N¬O Label¡A³o­Ó¶µ¥Ø´N¬O¤@­Ó¥i¥HÅý±z¦b¶}¾÷´£¥Ü°T®§®É¿é¤J¸Ó¦WºÙ¡A\n"
-"§Y¥i¨Ï¥Î¸Ó§@·~¨t²Î¶}¾÷¡C\n"
-"\n"
-" * ®Ö¤ß: ´N¬O Image¡A³o­Ó¶µ¥Ø¬O«ü¦V¨ì­n¨Ï¥Î¸Ó®Ö¤ßÀɮ׶}¾÷ªºÀɮצWºÙ¡C\n"
-"¤@¯ë¨Ó»¡¡A´N¬O¨Ï¥Î vmlinuz ©ÎªÌ¬O vmlinuz-2.4.8 µ¥³oÃþ¦WºÙ¡C\n"
-"\n"
-" * / ¤À³Î°Ï: «ü¦V¸Ó Linux ¨t²Î©Ò¦bªº / ®Ú¤À³Î°Ï¦ì¸m¡C\n"
-"\n"
-" * ªþ¥[°Ñ¼Æ: ³oÃä¥i¥H¿é¤J¤@¨ÇÃB¥~­n¶Çµ¹®Ö¤ßªº°Ñ¼Æ¡C¦b Apple ÀWªG¹q¸£µwÅé\n"
-"¶gÃä¸Ë¸m¤W¡A³o¸Ì¥i¥H«ü©w¤@¨Ç°Ñ¼Æ¥H«K©óªì©l¸ÜÅã¥Ü¥d¸Ë¸m¡A©ÎªÌ¬O±Ò°Ê¦bÁä½L\n"
-"¤Wªº·Æ¹«¸Ë¸m¡C¤U­±¬O¤@¨Ç¥i¥Îªº°Ñ¼Æ«ü©w¡A¤ñ¤è¹³¬O:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: ³o­Ó°Ñ¼Æ¬O¥Î¨Ó¯à°÷¦b®Ö¤ß¸ü¤J®É¡A¹w¥ý¸ü¤J¥i¥Îªº¼Ò²Õ¸Ë¸mÀɮסA\n"
-"¥H«K©ó¯à°÷¦b±¾¤J¨t²Î / ¤À³Î°Ï®É´N¤w¸g¯à°÷¦s¨ú / ©Ò¦b¸Ë¸m¡C¤@¯ë¨Ó»¡¡A·í±z\n"
-"¨t²Î¦w¸Ë¦b RAID¡BSCSI ¸Ë¸m¤W®É¡A¨t²Î»Ý­n¦b®Ö¤ß¸ü¤J®É¶¶«K±¾¤JÅX°Ê³o¨ÇµwÅé\n"
-"¸Ë¸mªºÅX°Êµ{¦¡¡A¥H«K©ó¤U­±¤~¯à°÷¥¿±`¦s¨ú³o¨Ç¸Ë¸m¡C¨Ï¥Î¸Ó¶µ¥Ø®É¡A¨t²Î·|\n"
-"©ó¶}¾÷®É¸ü¤J¤@­Ó©Ò¿×ªº initrd-image Àɮ׶i¦æ«áÄò°Ê§@¡C\n"
-"\n"
-" * Initrd-size: ·í±z­n¨Ï¥Î initrd-image ®É¡A¨t²Î·|¹w¥ý°t¸m¤@¶ô ramdisk \n"
-"¥H«K©ó¸ü¤J initrd-image ÀɮרӨϥΡC¸Ó¶µ¥Ø¹w³]¼Æ­È¬° 4096 Bytes¡C­Y¬O±z\n"
-"»Ý­n°t¸m¤@­Ó«Ü¤jªº ramdisk ¨Ï¥Î¡A³oÃä¥i¥H¤â°Ê«ü©w¡C\n"
-"\n"
-" * / ¥iŪ¼g: ¤@¯ë¨Ó»¡¡A®Ö¤ß¸ü¤J¨t²Î«á¡A¹w³]±¾¤J / ®Ú¤À³Î°Ï®É¡A¬O¨Ï¥Î\n"
-"read-only °ßŪ¼Ò¦¡¡A¥H«K©ó¥i¥H¦b¶}¾÷®É°»´ú¨t²ÎµwºÐ±¡ªp¡A©I¥s fsck µ{¦¡\n"
-"¶i¦æÀË´ú°Ê§@¡C­Y¬O§A¦³¨ä¥L»Ý­nªº¸Ü¡A§A¤~»Ý­n§â³o­Ó¶µ¥Ø¶}±Ò¡A­n¤£µM«Øij±z\n"
-"¤£¥Î¿ï¨ú³o­Ó¶µ¥Ø¡C\n"
-"\n"
-" * NoVideo: ¤@¯ë¬Oµ¹ Apple Åã¥Ü¥dµwÅé¸Ë¸m¸Ñ¨M¤@¨Ç°ÝÃD¨Ï¥Îªº¡C·íµM±z¥i¥H\n"
-"§â³o­Ó¶µ¥Ø¿ï¾Ü©ó \"novideo\" ¼Ò¦¡¡AÅý¨t²Î¨Ï¥Î­ì¥»Åã¥Ü¤è¦¡¡C\n"
-"\n"
-" * ¹w³]: ¿ï¾Ü¥Î¨Ó¹w³]¶}¾÷ªº¼ÐÅÒ¶µ¥Ø¡C¨Ì·Ó¦w¸Ë¤è¦¡ªº¤£¦P¡A¶}¾÷®É±z¥i¯à\n"
-"·|¬Ý¨ì¿ï³æ¼Ò¦¡¡A³o®É­Ô±z¥i¥H¥Î¤è¦VÁä¿ï¾Ü§A­n±Ò°Êªº¶µ¥Ø¡C©ÎªÌ¬O§A¬Ý¨ìªº\n"
-"¬O³æ¯Âªº boot: ´£¥Ü°T®§¡A¦¹®É±z¥i¥H«ö¤U [Tab] «öÁä¥i¥HÀò±o¯à°÷¿ï¾Ü¿é¤Jªº\n"
-"¶}¾÷¶µ¥Ø¼ÐÅÒ¡C"
-
-#: ../../help.pm_.c:765
-msgid ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot ¬O±Mªù¥Î¨Óµ¹ NewWorld MacIntosh µwÅé¹q¸£¨Ï¥Îªº¶}¾÷µ{¦¡¡C¥¦¯à°÷¥Î¨Ó\n"
-"±Ò°Ê GNU/Linux, MacOS ©ÎªÌ¬O MacOSX ³o¨Ç§@·~¨t²Î¡C¤@¯ë¨Ó»¡¡Aµ{¦¡±N·|°»´ú\n"
-"¨t²Î¥Ø«e¦w¸Ë¤F¨º¨Ç§@·~¨t²Î¡AµM«á±z´N¥i¥H«Ü¤è«Kªº¨Ï¥Î Yaboot µ{¦¡¨Ó±Ò°Ê©Ò¥H\n"
-"¨Ï¥Îªº§@·~¨t²ÎÀô¹Ò¡C­Y³oÃä¨Ã¨S¦³°»´ú¨ì±z¥Ø«e¨t²Î¦³¦w¸Ëªº§@·~¨t²ÎÀô¹Ò¡A\n"
-"±z¥i¥H¦b³o­Ó¿Ã¹õ¤W¨Ï¥Î¤â°Ê¤è¦¡·s¼W©Ò»Ý­nªº¶µ¥Ø¡C½Ðª`·N¤@¤U±z¤U­±©Ò¿ï¾Ü¨Ï¥Î\n"
-"ªº¬ÛÃö°Ñ¼Æ¡C\n"
-"\n"
-"Yaboot ªº¥D­n°Ñ¼Æ¥]§t:\n"
-"\n"
-" * Init Messages: ¥Î©ó¥X²{¶}¾÷´£¥Ü¦r¤¸®É¡A¹w¥ýÅã¥Üªº¤@¬q¤å¦r¤º®e¡C\n"
-"\n"
-" * Boot Device: «ü©w±z­n¥Î¨Ó©ñ¸m¥Î¨Ó±Ò°Ê GNU/Linux ©Ò»Ý­nªº¬ÛÃö¶}¾÷¸ê°T¡C\n"
-"\n"
-" * Open Firemare Delay: »P LILO ¤£¦Pªº¦a¤è´N¬O¡AYaboot ¦³¨â­Ó¥i¥Îªº delay\n"
-"°Ñ¼Æ¥i¥H¨Ï¥Î¡C²Ä¤@­Ó delay °Ñ¼Æ´N¬O¥Î¨Ó«ü©w±z¥i¥H¦b¦h¤Ö®É¶¡¤º (¬í¬°³æ¦ì)\n"
-"¿ï¾Ü¨Ï¥Î CD, OF boot, MacOS ©ÎªÌ¬O Linux ¨Ó¶i¦æ¶}¾÷°Ê§@¡C\n"
-"\n"
-" * Kernel Boot Timeout: ³o­Ó timeout Ãþ¦ü©ó LILO ªº delay °Ñ¼Æ¡A¤]´N¬O\n"
-"·í¿ï¾Ü¤F¤@­Ó¶µ¥Ø«á¡A­n°±¦h¤[®É¶¡¤~¯u¥¿¶i¦æ¤U­±¶}¾÷ªº°Ê§@¡C¤@¯ë¹w³]®É¶¡¬O\n"
-"0.1 ¬í¡C\n"
-"\n"
-" * Enable CD Boot?: ³]©w¸Ó¶µ¥Ø¡A¨Ó¶}°_Ãö³¬¤¹³\¿ï¾Ü \"C\" ¶µ¥Ø¥Î CD ¶}¾÷¡C\n"
-"\n"
-" * Enable OF Boot?: ³]©w¸Ó¶µ¥Ø¡A¨Ó¶}°_Ãö³¬¤¹³\¿ï¾Ü \"N\" ¶}±Ò Open Firemare\n"
-"  Delay ªº¥\¯à¡C\n"
-" * Default OS: §@¬°¹w³]¶}¾÷ªº¿ï¾Ü¶µ¥Ø¡C"
-
-#: ../../help.pm_.c:798
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
-"button to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
-"click on the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
-"the\n"
-"language you have chosen. But here again, as for the choice of a keyboard,\n"
-"you may not be in the country for which the chosen language should\n"
-"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
-"order to configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-msgstr ""
-"³oÃä¥Ø«e¦C¥Xªº¬O±z¨t²Î¬ÛÃö²ÕºA¤º®e³]©w¡C¨Ì¾Ú±z¨t²Î©Ò¦w¸ËªºµwÅéÀô¹Ò¡A\n"
-"±z¥i¥H¨Ï¥Î - ½Õ¾ã¤U­±©Ò¦C¥Ü¶µ¥Ø:\n"
-"\n"
-" * \"·Æ¹«\": ¬d¬Ý¥Ø«e·Æ¹«ªº³]©w¡AÂI¿ï¸Ó«ö¶s¯à°÷§ïÅܨä³]©w­È¡C\n"
-"\n"
-" * \"Áä½L\": ¬d¬Ý¥Ø«eÁä½L°t¸m³]©w¡AÂI¿ï¸Ó«ö¶s¯à°÷§ïÅܨä³]©w­È¡C\n"
-"\n"
-" * \"®É°Ï\": ¬d¬Ý¥Ø«e®É°Ï³]©w¡AÂI¿ï¸Ó«ö¶s¯à°÷§ïÅܨä³]©w­È¡C\n"
-"\n"
-" * \"¦Lªí¾÷\": ¬d¬Ý¦Lªí¾÷³]©w¡AÂI¿ï \"¨S¦³¦Lªí¾÷\" «ö¶s±Ò°Ê¦Lªí¾÷ºëÆF¡C\n"
-"\n"
-" * \"­µ®Ä¥d\": ¦w¸Ë®É©Ò°»´ú¨ìªº¨t²Î­µ®Ä¥d¶µ¥Ø¡A¦w¸Ë¹Lµ{µLªk³]©w¤§¡C\n"
-"\n"
-" * \"¹qµø¥d\": ¦w¸Ë®É©Ò°»´ú¨ìªº¨t²Î¹qµø¥d¶µ¥Ø¡A¦w¸Ë¹Lµ{µLªk³]©w¤§¡C\n"
-"\n"
-" * \"ISDN ¥d\n"
-": ¦w¸Ë®É©Ò°»´ú¨ìªº¨t²ÎISDN¤¶­±¥d¶µ¥Ø¡AÂI¿ï¸Ó¶µ¥Ø¯à°÷³]©w¤§¡C"
-
-#: ../../help.pm_.c:827
-msgid ""
-"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
-"partition. Be careful, all data present on it will be lost and will not be\n"
-"recoverable!"
-msgstr ""
-"¿ï¾Ü±z§Æ±æ¥Î¨Ó¦w¸Ë Mandrake Linux ¨t²ÎªºµwºÐ¡C·í§A¿ï¾Ü¦n«á¡A¸ÓÁûµwºÐ¤W­±\n"
-"©Ò¦³ªº¸ê®Æ±N·|³Q²M°£¦ÓµLªk®¾±Ï¡A½Ð¤p¤ß¾Þ§@³o­Ó¶µ¥Ø¡C"
-
-#: ../../help.pm_.c:832
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"¦pªG±z¯uªº½T©w­n²M°£³o­ÓµwºÐ¤W­±©Ò¦³ªº¤À³Î°Ï»P¸ê®Æªº¸Ü¡AÂI¿ï \"½T©w\" \n"
-"«ö¶s¡C·í±z¿ï¾Ü³o­Ó¶µ¥Ø«á¡A´N¯uªº¨S¦³¿ìªk±Ï¦^¸ÓÁûµwºÐ¤Wªº¸ê®Æ¤F¡C\n"
-"\n"
-"±z¥i¥HÂI¿ï \"¨ú®ø\" «ö¶s©ñ±ó³o­Ó¿ï¾Ü¡C"
-
-#: ../../install2.pm_.c:114
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is missing)"
-msgstr ""
-
-#: ../../install_any.pm_.c:421
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"±z¤w¸g¿ï¾Ü¦w¸Ë¤F¤U­±ªº®M¥ó: %s\n"
-"\n"
-"\n"
-"³o¨Ç®M¥ó¦w¸Ë¦n«á¹w³]¬O±Ò°Êªº¡A¦]¬°³o¨Ç®M¥ó¬Y¨Ç¼h­±¨Ó»¡¬O¤ñ¸û¤£¦w¥þªº¡A\n"
-"©Ò¥H«Ü¦³¥i¯à¥L¤H·|¸g¥Ñ³o¨Ç®M¥óªºº|¬}¦M®`±zªº¨t²Î¡C¦]¦¹«Øij§A¦w¸Ë¦n\n"
-"¨t²Î«á¡A¤@©w­n¥ý½T©w³o¨Ç®M¥ó¬O§_¤w¸g¦³§ó·sªºª©¥»¡A­Y¬O¦³ªº¸Ü½Ð°O±o\n"
-"¤@©w­n§ó·s¡C\n"
-"\n"
-"\n"
-"±z½T©w¯uªº­n¦w¸Ë³o¨Ç®M¥ó¶µ¥Ø¶Ü¡H\n"
-
-#: ../../install_any.pm_.c:457
-msgid "Can't use broadcast with no NIS domain"
-msgstr "¨S¦³ NIS °ì¦WµLªk¬d¸ßºô¸ô¸ê°T"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "½Ð¦b %s ¤¤´¡¤J¤w¸g®æ¦¡¤Æ(FAT®æ¦¡)ºÏºÐ¤ù"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "³o±i¨Ã¤£¬O FAT ®æ¦¡¤ÆªººÏºÐ¤ù"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"­n¨Ï¥Î©ÒÀx¦sªº®M¥ó¿ï¾Ü¡A¦b¶}¾÷¦w¸Ë±Ò°Ê LILO µ{¦¡ªº®É­Ô¡A©ó boot ¿é¤J:linux "
-"defcfg=floopy §Y¥i¡C"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
-#, c-format
-msgid "Error reading file %s"
-msgstr "Ū¨úÀÉ®× %s ®Éµo¥Í¿ù»~"
-
-#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
-#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
-#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
-#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
-#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
-#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
-msgid "Ok"
-msgstr "½T©w"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"¨t²Î¬Y¨ÇµwÅé»Ý­nÃB¥~ªºÅX°Êµ{¦¡¥H«K©ó¯à°÷ÅX°Ê¤u§@¡C±z¥i¥H¦b³o¸Ì§ä¨ì¤@¨Ç\n"
-"¬ÛÃöªº¸ê°T: %s"
-
-#: ../../install_interactive.pm_.c:44
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"±z¤@©w±o­n«ü©w¤@­Ó¤À³Î°Ï¨Ó©ñ®Ú¥Ø¿ý¡A­n¶i¦æ³o­Ó¤u§@\n"
-"ªº¸Ü¡A½Ð«Ø¥ß¤@­Ó¤À³Î°Ï (©Î¿ï¤@­Ó¤w¸g¦s¦bªº¤À³Î°Ï)¡A\n"
-"±µµÛ¿ï \"±¾¸üÂI\" ³o­Ó¾Þ§@¡A§â±¾¸üÂI³]¦¨ `/'¡C"
-
-#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
-msgid "You must have a swap partition"
-msgstr "±z¥²¶·¦³¦Ü¤Ö¤@­Ó¸m´«¤À³Î°Ï"
-
-#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"±z¨S¦³³]©w¸m´«¤À³Î°Ï¡A\n"
-"\n"
-"¤£ºÞ¦p¦ó³£­nÄ~Äò ?"
-
-#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "±z¥²¶·¦³¤@­Ó±¾¸ü©ó /boot/efi ªº FAT ¤À³Î°Ï"
-
-#: ../../install_interactive.pm_.c:76
-msgid "Use free space"
-msgstr "¨Ï¥Î¥¼¥Î¨ìªºªÅ¶¡"
-
-#: ../../install_interactive.pm_.c:78
-msgid "Not enough free space to allocate new partitions"
-msgstr "¨S¦³¨¬°÷ªºªÅ¶¡¥i¥H«Ø¥ß·sªº¤À³Î°Ï¤F"
-
-#: ../../install_interactive.pm_.c:86
-msgid "Use existing partition"
-msgstr "¨Ï¥Î¤w¸g¦s¦bªº¤À³Î°Ï"
-
-#: ../../install_interactive.pm_.c:88
-msgid "There is no existing partition to use"
-msgstr "¨S¦³¤w¸g¦s¦bªº¤À³Î°Ï¥i¨Ñ¨Ï¥Î"
-
-#: ../../install_interactive.pm_.c:95
-msgid "Use the Windows partition for loopback"
-msgstr "¨Ï¥Î Windows ¤À³Î°Ï§@¬° loopback"
-
-#: ../../install_interactive.pm_.c:98
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "±z§Æ±æ­n¥Î¨º­Ó¤À³Î°Ïµ¹ Linux4Win ¨Ó¨Ï¥Î©O¡H"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Choose the sizes"
-msgstr "¿ï¨ú¤j¤p"
-
-#: ../../install_interactive.pm_.c:101
-msgid "Root partition size in MB: "
-msgstr "®Ú¥Ø¿ý¤À³Î°Ïªº¤j¤p (MB): "
-
-#: ../../install_interactive.pm_.c:102
-msgid "Swap partition size in MB: "
-msgstr "¸m´«¤À³Î°Ïªº¤j¤p (MB): "
-
-#: ../../install_interactive.pm_.c:111
-msgid "Use the free space on the Windows partition"
-msgstr "¨Ï¥Î Windows ¤À³Î°Ï©Ò³Ñ¾lªº¥i¥ÎªÅ¶¡"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Which partition do you want to resize?"
-msgstr "±z­n±q·s³]©w¨º­Ó¤À³Î°Ïªº¤j¤p ?"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Computing Windows filesystem bounds"
-msgstr "¥¿¦b­pºâ Windows Àɮרt²ÎªºÃä¬É"
-
-#: ../../install_interactive.pm_.c:119
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"µLªk½Õ¾ã¸Ó FAT ¤À³Î°Ïªº¤j¤p¡Aµo¥Í¤F¤U­±ªº¿ù»~:\n"
-"%s"
-
-#: ../../install_interactive.pm_.c:122
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "±zªº Windows ¤À³Î°ÏÀɮרt²Î¦³ÄY­«ªºÂ_Â÷±¡ªp¡A½Ð¥ý­«²Õ°Ê§@¦A¶i¦æ"
-
-#: ../../install_interactive.pm_.c:123
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this operation is\n"
-"dangerous. If you have not already done so, you should first exit the\n"
-"installation, run scandisk under Windows (and optionally run defrag), then\n"
-"restart the installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ĵ§i!\n"
-"\n"
-"DrakX ²{¦b­n­«©w±z Windows ¤À³Î°Ïªº¤j¤p¡A½Ð¤p¤ß!! \n"
-"³o­Ó°Ê§@¬O«Ü¦MÀIªº¡A½Ð¥ýÂ÷¶}¦w¸Ëµ{¦¡¡A¦b Windows \n"
-"©³¤U°õ¦æ scandisk ¸ò defrag ¥H«á¦A¨Ó¦w¸Ë Linux¡A¦Ó¥B\n"
-"³Ì¦n¥ý±N Windows ¤À³Î°Ï©³¤Uªº¸ê®Æ°µ¦n³Æ¥÷¡C½T©w³£\n"
-"¨S°ÝÃD¥H«á¡A¤~«ö \"½T©w\" ¶s¡C"
-
-#: ../../install_interactive.pm_.c:132
-msgid "Which size do you want to keep for windows on"
-msgstr "±z­n«O¯d¦h¤ÖªÅ¶¡µ¹ windows ¨Ï¥Î"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid "partition %s"
-msgstr "¤À³Î°Ï %s"
-
-#: ../../install_interactive.pm_.c:139
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT ­«©w¤j¤p¥¢±Ñ: %s"
-
-#: ../../install_interactive.pm_.c:154
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr "¨S¦³¥i¥Îªº FAT ¤À³Î°Ï¯à°÷½Õ¾ã¤j¤p¡A©ÎªÌ¬O¸Ó¤À³Î°Ï¨S¨¬°÷ªÅ¶¡"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Erase entire disk"
-msgstr "§R°£©Ò¦³ºÏºÐ¤º®e"
-
-#: ../../install_interactive.pm_.c:160
-msgid "Remove Windows(TM)"
-msgstr "²¾°£ Windows(TM)"
-
-#: ../../install_interactive.pm_.c:163
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "§A¨t²Î¤W¦³¦hÁûµwºÐ¥i¨Ñ¦w¸Ë Linux ¨t²Î¡A±z¥´ºâ­n·Ç³Æ¨º¤@Áû¨Ñ¦w¸Ë¨Ï¥Î¡H"
-
-#: ../../install_interactive.pm_.c:166
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "©Ò¦³¦b %s ºÏºÐ¤Wªº¤À³Î°Ï¸ò¸ê®Æ³£·|³Q²M°£±¼"
-
-#: ../../install_interactive.pm_.c:174
-msgid "Custom disk partitioning"
-msgstr "¦Û­qºÏºÐ¤À³Î"
-
-#: ../../install_interactive.pm_.c:178
-msgid "Use fdisk"
-msgstr "¨Ï¥Î fdisk µ{¦¡"
-
-#: ../../install_interactive.pm_.c:181
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"±z¥Ø«e­n¹ï %s ¤À³Î°Ï¶i¦æ¹º¤À°Ê§@¡C\n"
-"·í±z§¹¦¨®É¡A§O§Ñ¤F¿é¤J 'w' ¼g¤J±zªºÅܧó"
-
-#: ../../install_interactive.pm_.c:210
-msgid "You don't have enough free space on your Windows partition"
-msgstr "±zªº Windows ¤À³Î°Ï¨Ã¨S¦³¨¬°÷ªº¤À³Î°Ï !"
-
-#: ../../install_interactive.pm_.c:226
-msgid "I can't find any room for installing"
-msgstr "§ä¤£¨ì¥ô¦ó¥i¥Îªº¦w¸ËªÅ¶¡"
-
-#: ../../install_interactive.pm_.c:230
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX ¤À³ÎºëÆF§ä¨ì¤F¤U­±¥i¥Îªº¸Ñ¨M¤è®×"
-
-#: ../../install_interactive.pm_.c:235
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "µwºÐ¤À³Î¥¢±Ñ: %s"
-
-#: ../../install_interactive.pm_.c:241
-msgid "Bringing up the network"
-msgstr "±Ò°Êºô¸ô³s½u"
-
-#: ../../install_interactive.pm_.c:246
-msgid "Bringing down the network"
-msgstr "Ãö³¬ºô¸ô³s½u"
-
-#: ../../install_steps.pm_.c:73
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"µo¥Í¤F¤@­Óµ{¦¡¤£ª¾¹D¸Ó¦p¦ó§´µ½³B¸mªº¿ù»~¡A\n"
-"­nÄ~Äò¦w¸Ë¤u§@ªº¸Ü½Ð¤p¤ß¡C"
-
-#: ../../install_steps.pm_.c:207
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "­«½Æªº±¾¸üÂI %s"
-
-#: ../../install_steps.pm_.c:384
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"¦³¤@³¡¤À­«­nªº®M¥óµLªk¦w¸Ë¨ì¨t²Î¡C\n"
-"¥i¯à¬O±zªº cdrom µwÅ馳°ÝÃD¡A©ÎªÌ¬O CD ¦w¸Ë¤ù·´·l¤F\n"
-
-#: ../../install_steps.pm_.c:459
-#, c-format
-msgid "Welcome to %s"
-msgstr "Åwªï¨Ó¨ì %s"
-
-#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
-msgid "No floppy drive available"
-msgstr "¨S¦³¥i¥Îªº³nºÐ¾÷"
-
-#: ../../install_steps_auto_install.pm_.c:77
-#: ../../install_steps_stdio.pm_.c:23
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "¶i¤J¨BÆJ `%s'\n"
-
-#: ../../install_steps_graphical.pm_.c:287
-msgid "Choose the size you want to install"
-msgstr "¿ï¾Ü±z­n¦w¸Ëªº¤j¤p"
-
-#: ../../install_steps_graphical.pm_.c:334
-msgid "Total size: "
-msgstr "Á`¦@¤j¤p: "
-
-#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
-#, c-format
-msgid "Version: %s\n"
-msgstr "ª©¥»½s¸¹: %s\n"
-
-#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "¤j¤p: %d KB\n"
-
-#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
-#: ../../install_steps_interactive.pm_.c:509
-msgid "Choose the packages you want to install"
-msgstr "¿ï¾Ü±z·Q­n¦w¸Ëªº®M¥ó"
-
-#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
-msgid "Info"
-msgstr "¸ê°T"
-
-#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Install"
-msgstr "¦w¸Ë"
-
-#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Installing"
-msgstr "¥¿¦b¦w¸Ë"
-
-#: ../../install_steps_graphical.pm_.c:499
-msgid "Please wait, "
-msgstr "½Ðµy­Ô, "
-
-#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
-msgid "Time remaining "
-msgstr "³Ñ¾l®É¶¡"
-
-#: ../../install_steps_graphical.pm_.c:502
-msgid "Total time "
-msgstr "®É¶¡Á`­p"
-
-#: ../../install_steps_graphical.pm_.c:507
-#: ../../install_steps_interactive.pm_.c:695
-msgid "Preparing installation"
-msgstr "¥¿¦b·Ç³Æ¦w¸Ë¤u§@"
-
-#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
-#, c-format
-msgid "Installing package %s"
-msgstr "¥¿¦b¦w¸Ë %s ®M¥ó"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-#: ../../install_steps_gtk.pm_.c:646
-msgid "Go on anyway?"
-msgstr "µL½×¦p¦ó³£­nÄ~Äò¶Ü ?"
-
-#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
-msgid "There was an error ordering packages:"
-msgstr "±Æ¦C®M¥ó®Éµo¥Í¿ù»~¡G"
-
-#: ../../install_steps_graphical.pm_.c:577
-msgid "Use existing configuration for X11?"
-msgstr "«O«ù¨t²Î­ì¦³ªº X11 ³]©w­È¶Ü ?"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"±zªº¨t²Î¸ê·½¦ü¥G¤Ó§C (¹êÅé°O¾ÐÅé¤Ó¤Öµ¥)¡A³o¥i¯à¾É­P¦b¦w¸Ë¹Lµ{¤¤·|µo¥Í\n"
-"¤£¥i¹w´Áªº¿ù»~¾É­P¦w¸Ë¥¢±Ñ¡C«Øij±z¡A­Y¬O±µ¤U¨Óªº½TµLªk¥¿±`¦w¸Ëªº¸Ü¡A\n"
-"½Ð§ï¥Î¤å¦r¼Ò¦¡ªº¤è¦¡¦w¸Ë¸û¨Î¡C\n"
-"¤]´N¬O¶}¾÷®É¥X²{ boot: °T®§®É¡A½Ð¿é¤J text ¶i¦æ¤å¦r¦w¸Ë§Y¥i¡C"
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
-msgid "Install Class"
-msgstr "¦w¸Ëªº¤è¦¡"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please, choose one of the following classes of installation:"
-msgstr "½Ð±q¤U¦Cªº¿ï¶µ¸Ì­±¿ï¨ú¾A¦Xªº¦w¸ËºØÃþ:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "±z¿ï¨úªº©Ò¦³¸s²ÕªºÁ`¦@¤j¤p¬ù¬° %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"¦pªG±z§Æ±æ¦w¸Ë¤Ö©ó¸Ó®e¶q¤j¤pªº®M¥ó¡A\n"
-"¿ï¾Ü±z§Æ±æ­n¦w¸Ë®M¥óªº¦Ê¤À¤ñ¡C\n"
-"¦Ê¤À¤ñ¶V¤Ö¡A·N¨ýµÛ¥u·|¦w¸Ë¨t²Î¥²³Æªº®M¥ó¶µ¥Ø;\n"
-"­Y¬O¦Ê¤À¤ñ¬O 100%% ªº¸Ü¡A´N¬O¦w¸Ë©Ò¦³¿ï¾Üªº®M¥ó¡C"
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"±z¥Ø«e¨t²Î¥i¥ÎªÅ¶¡¥u¯à°÷¦w¸Ë %d%% ªº®M¥ó¼Æ¶q¡C\n"
-"\n"
-"¦pªG±z§Æ±æ¦w¸Ë¤Ö©ó¸Ó®e¶q¤j¤pªº®M¥ó¡A\n"
-"¿ï¾Ü±z§Æ±æ­n¦w¸Ë®M¥óªº¦Ê¤À¤ñ¡C\n"
-"¦Ê¤À¤ñ¶V¤Ö¡A·N¨ýµÛ¥u·|¦w¸Ë¨t²Î¥²³Æªº®M¥ó¶µ¥Ø;\n"
-"¦Ê¤À¤ñ %d%% ¬OºÉ¥i¯à¦w¸Ë¶V¦h®M¥ó¡C"
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "±zÁÙ¥i¥H¦b±µ¤U¨Óªº¨BÆJ¤¤§@§óºë½Tªº®M¥ó¿ï¾Ü"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "·Ç³Æ¦w¸Ëªº®M¥ó¦û©Ò¦³®M¥óªº¤ñ¨Ò"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
-msgid "Package Group Selection"
-msgstr "¨Ì¸s²Õ¿ï¨ú­n¦w¸Ëªº®M¥ó"
-
-#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
-msgid "Individual package selection"
-msgstr "¿ï¨ú³æ¤@®M¥ó"
-
-#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Á`¦@¤j¤p: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:385
-msgid "Bad package"
-msgstr "·´·lªº®M¥ó"
-
-#: ../../install_steps_gtk.pm_.c:386
-#, c-format
-msgid "Name: %s\n"
-msgstr "¦WºÙ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:389
-#, c-format
-msgid "Importance: %s\n"
-msgstr "­«­n©Ê: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:411
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "¦]¬°µwºÐªÅ¶¡¤£¨¬¡A±z¤£¥i¥H¿ï¨ú³o­Ó®M¥ó¡C"
-
-#: ../../install_steps_gtk.pm_.c:416
-msgid "The following packages are going to be installed"
-msgstr "¤U¦Cªº®M¥ó±N·|³Q¦w¸Ë¤W"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid "The following packages are going to be removed"
-msgstr "¤U¦Cªº®M¥ó±N·|³Q²¾°£"
-
-#: ../../install_steps_gtk.pm_.c:429
-msgid "You can't select/unselect this package"
-msgstr "±z¤£¥i¥H¤Á´«³o­Ó®M¥óªºª¬ºA"
-
-#: ../../install_steps_gtk.pm_.c:441
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "³o¬O¤@­Ó¥²­nªº®M¥ó¡A±z¤£¥i¥H¿ï¾Ü¤£­n¦w¸Ë³o­Ó®M¥ó"
-
-#: ../../install_steps_gtk.pm_.c:443
-msgid "You can't unselect this package. It is already installed"
-msgstr "³o­Ó®M¥ó¤w¸g¦w¸Ë¦b¨t²Î¤W¤F¡A±z¤£¥i¥H¤£¿ï³o­Ó®M¥ó"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"³o­Ó®M¥ó¤@©w­n§ó·s¤~¦æ¡A\n"
-"±z½T©w±z¤£­n¿ï¥¦¶Ü?"
-
-#: ../../install_steps_gtk.pm_.c:451
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "³o­Ó®M¥ó¤@©w­n§ó·s¤~¦æ¡A±z¤£¥i¥H¤£¿ï³o­Ó®M¥ó"
-
-#: ../../install_steps_gtk.pm_.c:456
-msgid "Show automatically selected packages"
-msgstr "Åã¥Ü¦Û°Ê¿ï¨úªº®M¥ó"
-
-#: ../../install_steps_gtk.pm_.c:460
-msgid "Load/Save on floppy"
-msgstr "¥Ñ³nºÐ¸ü¤J/Àx¦s"
-
-#: ../../install_steps_gtk.pm_.c:461
-msgid "Updating package selection"
-msgstr "¥¿¦b§ó·s®M¥óªº¿ï¾Ü"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Minimal install"
-msgstr "³Ì¤p¦w¸Ë"
-
-#: ../../install_steps_gtk.pm_.c:503
-msgid "Estimating"
-msgstr "¥¿¦b¦ô­p"
-
-#: ../../install_steps_gtk.pm_.c:522
-msgid "Please wait, preparing installation"
-msgstr "¥¿¦b·Ç³Æ¦w¸Ë¤u§@..."
-
-#: ../../install_steps_gtk.pm_.c:553
-#, c-format
-msgid "%d packages"
-msgstr "%d ­Ó®M¥ó"
-
-#: ../../install_steps_gtk.pm_.c:599
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Accept"
-msgstr "±µ¨ü"
-
-#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
-msgid "Refuse"
-msgstr "©Úµ´"
-
-#: ../../install_steps_gtk.pm_.c:628
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"´«¤ù¤F!\n"
-"\n"
-"½Ð´¡¤J©R¦W¬° \"%s\" ªº MandrakeLinux ¦w¸Ë¤ù¡AµM«á«ö¤U½T©wÄ~Äò¡C\n"
-"­Y¬O±z¨Ã¨S¦³³o±i¦w¸Ë¤ù¡A½ÐÂI¿ï¨ú®ø¥H«K©ó³o¤@±i¦w¸Ë¤ùªº¦w¸Ëªº°Ê§@¡C"
-
-#: ../../install_steps_gtk.pm_.c:646
-msgid "There was an error installing packages:"
-msgstr "¦w¸Ë®M¥ó®Éµo¥Í¿ù»~¡G"
-
-#: ../../install_steps_interactive.pm_.c:37
-msgid "An error occurred"
-msgstr "µo¥Í¤@­Ó¿ù»~"
-
-#: ../../install_steps_interactive.pm_.c:71
-msgid "License agreement"
-msgstr "ª©Åv¨óij"
-
-#: ../../install_steps_interactive.pm_.c:72
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:168
-#: ../../install_steps_interactive.pm_.c:871
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Áä½L"
-
-#: ../../install_steps_interactive.pm_.c:169
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "½Ð¿ï¨úÁä½L±Æ¦Cªº®æ¦¡¬O¨º¤@ºØ¡C"
-
-#: ../../install_steps_interactive.pm_.c:170
-msgid "Here is the full list of keyboards available"
-msgstr "¤U­±²M³æ¬O¥i¨Ñ¿ï¾ÜªºÁä½L¦Cªí"
-
-#: ../../install_steps_interactive.pm_.c:187
-msgid "Which installation class do you want?"
-msgstr "±z·Q¥Î¨ººØ¦w¸Ë¤è¦¡ ?"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Install/Update"
-msgstr "¦w¸Ë/¤É¯Å"
-
-#: ../../install_steps_interactive.pm_.c:189
-msgid "Is this an install or an update?"
-msgstr "±z­n¶i¦æ¦w¸Ë©Î¬O¤É¯Å¡H"
-
-#: ../../install_steps_interactive.pm_.c:198
-msgid "Recommended"
-msgstr "«Øij­È"
-
-#: ../../install_steps_interactive.pm_.c:201
-#: ../../install_steps_interactive.pm_.c:204
-msgid "Expert"
-msgstr "±M®a«¬"
-
-#: ../../install_steps_interactive.pm_.c:212
-msgid "Update"
-msgstr "¤É¯Å"
-
-#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
-msgid "Please, choose the type of your mouse."
-msgstr "½Ð¿ï¨ú·Æ¹«ªº§Î¦¡¡C"
-
-#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
-msgid "Mouse Port"
-msgstr "·Æ¹«³s±µ°ð"
-
-#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "½Ð¿ï¨ú±z·Æ¹«³s±µªº§Ç¦C°ð¡C"
-
-#: ../../install_steps_interactive.pm_.c:239
-msgid "Buttons emulation"
-msgstr "«öÁä¼ÒÀÀ"
-
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Button 2 Emulation"
-msgstr "¨âÁä¼ÒÀÀ"
-
-#: ../../install_steps_interactive.pm_.c:242
-msgid "Button 3 Emulation"
-msgstr "¤TÁä¼ÒÀÀ"
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "Configuring PCMCIA cards..."
-msgstr "¥¿¦b³]©w PCMCIA ¥d..."
-
-#: ../../install_steps_interactive.pm_.c:261
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Configuring IDE"
-msgstr "³]©w IDE ¸Ë¸m"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "no available partitions"
-msgstr "§ä¤£¨ì¥i¥Îªº¤À³Î°Ï"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Scanning partitions to find mount points"
-msgstr "¥¿¦b±½´y¤À³Î°Ï©ÒÄݪº±¾¤JÂI"
-
-#: ../../install_steps_interactive.pm_.c:292
-msgid "Choose the mount points"
-msgstr "¿ï¨ú±¾¸üÂI"
-
-#: ../../install_steps_interactive.pm_.c:311
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"µ{¦¡µLªkŪ¨ú±zªºµwºÐ¤À³Î°Ï°t¸mªí¡A³o­Ó°t¸mªí¦³°ÝÃD :(\n"
-"µ{¦¡¥i¥HÄ~Äò¨Ã²MªÅÃaªº¤À³Î°Ï (©Ò¦³ªº¸ê®Æ³£·|®ø¥¢)¡A©ÎªÌ\n"
-"±z¤]¥i¥H¸T¤î DrakX ¦w¸Ëµ{¦¡­×§ïµwºÐ¤À³Îªí¡C\n"
-"(¿ù»~¬O %s)\n"
-"\n"
-"±z¦P·N²M°£©Ò¦³ªº³o¨Ç¤À³Î°Ï¶Ü?\n"
-
-#: ../../install_steps_interactive.pm_.c:324
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake µLªk¥¿½TŪ¨úµwºÐ¤À³Î°Ï°t¸mªí¡A\n"
-"Ä~Äò¦w¸Ë¤u§@¬O«Ü¦MÀIªº !!"
-
-#: ../../install_steps_interactive.pm_.c:340
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"¨S¦³¨¬°÷ªº¥i¥ÎªÅ¶¡¦w¸Ë¶}¾÷ºÞ²zµ{¦¡! ¦w¸ËÁÙ¬O·|Ä~Äò¡A¦ý¬O±z»Ý­n¨Ï¥Î ¶}¾÷¤ù¤~¯à"
-"°÷¥¿½T±Ò°Ê¨t²Î¡C"
-
-#: ../../install_steps_interactive.pm_.c:349
-msgid "No root partition found to perform an upgrade"
-msgstr "§ä¤£¨ì¨t²Î®Ú¥Ø¿ý©Ò¦bªº¤À³Î°Ï¦]¦¹µLªk¤É¯Å"
-
-#: ../../install_steps_interactive.pm_.c:350
-msgid "Root Partition"
-msgstr "®Ú¥Ø¿ý©Ò¦bªº¤À³Î°Ï"
-
-#: ../../install_steps_interactive.pm_.c:351
-msgid "What is the root partition (/) of your system?"
-msgstr "±z¨t²Î¤W¥Î¨Ó§@¬°®Ú¥Ø¿ý (/) ªº¤À³Î°Ï¬O¨º¤@­Ó ?"
-
-#: ../../install_steps_interactive.pm_.c:365
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "±z¶·­n­«·s¶}¾÷¥H¨Ï¥Î§ó°Ê¹LªºµwºÐ¤À³Îªí"
-
-#: ../../install_steps_interactive.pm_.c:389
-msgid "Choose the partitions you want to format"
-msgstr "¿ï¾Ü­n®æ¦¡¤Æªº¤À³Î°Ï"
-
-#: ../../install_steps_interactive.pm_.c:390
-msgid "Check bad blocks?"
-msgstr "ÀˬdÃa±¼ªººÏ°Ï?"
-
-#: ../../install_steps_interactive.pm_.c:416
-msgid "Formatting partitions"
-msgstr "¥¿¦b®æ¦¡¤Æ¤À³Î°Ï"
-
-#: ../../install_steps_interactive.pm_.c:418
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "«Ø¥ß¨Ã®æ¦¡¤ÆÀÉ®× %s"
-
-#: ../../install_steps_interactive.pm_.c:421
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "¨S¦³¨¬°÷ªºµêÀÀ°O¾ÐÅé¥i¥H¥Î¨Ó§¹¦¨¦w¸Ë§@·~¡A½Ð¼W¥[¸m´«ªÅ¶¡"
-
-#: ../../install_steps_interactive.pm_.c:427
-msgid "Looking for available packages"
-msgstr "¥¿¦b·j´M¥i¥H¦w¸Ëªº®M¥ó"
-
-#: ../../install_steps_interactive.pm_.c:433
-msgid "Finding packages to upgrade"
-msgstr "¥¿¦b·j´M»Ý­n¤É¯Åªº®M¥ó"
-
-#: ../../install_steps_interactive.pm_.c:450
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "±zªº¨t²Î¨S¦³¨¬°÷ªºªÅ¶¡¥i¥H¥Î¨Ó¦w¸Ë©Î¤É¯Å¤F (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "§¹¾ã (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "³Ì¤p (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:469
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "«Øij (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:475
-msgid "Custom"
-msgstr "¦Û­q"
-
-#: ../../install_steps_interactive.pm_.c:522
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"½Ð¿ï¾Ü¦b¸ü¤J©ÎªÌ¬OÀx¦s©Ò¿ï¾Üªº®M¥ó¨ìºÏ¤ù¤º¡C\n"
-"¸ÓºÏ¤ù®æ¦¡´N¬O¦Û°Ê¦w¸Ë®É©Ò»s§@²£¥ÍªººÏ¤ù®æ¦¡¡C"
-
-#: ../../install_steps_interactive.pm_.c:525
-msgid "Load from floppy"
-msgstr "¸ü¤J³nºÐ¤¤ªº³]©w­È"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Loading from floppy"
-msgstr "¥¿¦b¸ü¤J³nºÐ¤¤ªº³]©w­È"
-
-#: ../../install_steps_interactive.pm_.c:527
-msgid "Package selection"
-msgstr "®M¥ó¿ï¨ú"
-
-#: ../../install_steps_interactive.pm_.c:532
-msgid "Insert a floppy containing package selection"
-msgstr "½Ð´¡¤J¤@±i¥]§t³nÅé¿ï¨ú²M³æ¬ö¿ýªººÏ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:544
-msgid "Save on floppy"
-msgstr "Àx¦s³]©w¨ìºÏ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:605
-msgid "Selected size is larger than available space"
-msgstr "©Ò¿ï¨ú¬ö¿ýªº¶µ¥Ø¶W¹L¥i¥ÎªººÏºÐªÅ¶¡"
-
-#: ../../install_steps_interactive.pm_.c:670
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"¦pªG±z¦³¤U­±²M³æ¤º©Ò¦C¥Xªº CD ¥úºÐ¤ù¡A½Ð¿ï¾Ü½T©w¡C\n"
-"¦pªG³£¨S¦³ªº¸Ü¡A½Ð¿ï¾Ü¨ú®ø¡C\n"
-"¦pªG¦³¤@¨Ç¶µ¥Ø±z¨Ã¨S¦³ªº¸Ü¡A§â¸Ó¶µ¥Ø¨ú®ø¿ï¨ú¡AµM«á«ö¤U½T©wÄ~Äò¡C"
-
-#: ../../install_steps_interactive.pm_.c:675
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "¼Ð¬° \"%s\" ªº¥úºÐ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:704
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"¥¿¦b¦w¸Ë %s ®M¥ó\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:713
-msgid "Post-install configuration"
-msgstr "¦w¸Ë«áªº¶i¤@¨B³]©w"
-
-#: ../../install_steps_interactive.pm_.c:719
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "½Ð¦b %s ºÏºÐ¾÷¤º´¡¤J¤@±i¥i¶}¾÷ºÏºÐ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:725
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "½Ð¦b %s ºÏºÐ¾÷¤º´¡¤J¤@±i¥]§t§ó·s¼Ò²Õ¸ê®ÆªººÏºÐ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:750
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:782
-msgid "Choose a mirror from which to get the packages"
-msgstr "¿ï¨ú­n¥Î¨Ó§ì¨úµ{¦¡®M¥óÀɪº FTP ¬M®g¯¸¥x"
-
-#: ../../install_steps_interactive.pm_.c:793
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "¦V FTP ¬M®g¯¸¥x¬d¸ß¥i¥Îªºµ{¦¡®M¥ó¦Cªí"
-
-#: ../../install_steps_interactive.pm_.c:796
-msgid "Please choose the packages you want to install."
-msgstr "½Ð¿ï¨ú±z·Q­n¦w¸Ëªº®M¥ó¡C"
-
-#: ../../install_steps_interactive.pm_.c:808
-msgid "Which is your timezone?"
-msgstr "±zªº®É°Ï¬°¦ó ?"
-
-#: ../../install_steps_interactive.pm_.c:813
-msgid "Hardware clock set to GMT"
-msgstr "µwÅé®ÉÄÁ³]©w¬° GMT ®É¶¡"
-
-#: ../../install_steps_interactive.pm_.c:814
-msgid "Automatic time synchronization (using NTP)"
-msgstr "¦Û°Ê³z¹L NTP ªA°È®Õ®É"
-
-#: ../../install_steps_interactive.pm_.c:821
-msgid "NTP Server"
-msgstr "NTP ¦øªA¥D¾÷"
-
-#: ../../install_steps_interactive.pm_.c:855
-#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
-msgid "Remote CUPS server"
-msgstr "»·ºÝ CUPS ¦øªA¾¹"
-
-#: ../../install_steps_interactive.pm_.c:856
-msgid "No printer"
-msgstr "µL¦Lªí¾÷"
-
-#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Á`µ²"
-
-#: ../../install_steps_interactive.pm_.c:870
-msgid "Mouse"
-msgstr "·Æ¹«"
-
-#: ../../install_steps_interactive.pm_.c:872
-msgid "Timezone"
-msgstr "®É°Ï"
-
-#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
-#: ../../printerdrake.pm_.c:1844
-msgid "Printer"
-msgstr "¦Lªí¾÷"
-
-#: ../../install_steps_interactive.pm_.c:875
-msgid "ISDN card"
-msgstr "ISDN ¤¶­±¥d"
-
-#: ../../install_steps_interactive.pm_.c:878
-msgid "Sound card"
-msgstr "­µ®Ä¥d"
-
-#: ../../install_steps_interactive.pm_.c:881
-msgid "TV card"
-msgstr "¹qµø¥d"
-
-#: ../../install_steps_interactive.pm_.c:917
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:945
-msgid "LDAP"
-msgstr "¨Ï¥Î LDAP"
-
-#: ../../install_steps_interactive.pm_.c:918
-#: ../../install_steps_interactive.pm_.c:941
-#: ../../install_steps_interactive.pm_.c:954
-msgid "NIS"
-msgstr "¨Ï¥Î NIS"
-
-#: ../../install_steps_interactive.pm_.c:919
-#: ../../install_steps_interactive.pm_.c:941
-msgid "Local files"
-msgstr "¥»¾÷±K½XÀÉ"
-
-#: ../../install_steps_interactive.pm_.c:928
-#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "³]©w root ±K½X"
-
-#: ../../install_steps_interactive.pm_.c:930
-msgid "No password"
-msgstr "¨S¦³±K½X"
-
-#: ../../install_steps_interactive.pm_.c:935
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "³o­Ó±K½X¤Ó²³æ¤F (¤@©w¦Ü¤Ö­n¦³ %d ­Ó¦r¤¸¤~¦æ)"
-
-#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
-#: ../../standalone/draknet_.c:604
-msgid "Authentication"
-msgstr "»{ÃҤ覡"
-
-#: ../../install_steps_interactive.pm_.c:949
-msgid "Authentication LDAP"
-msgstr "LDAP »{ÃÒ"
-
-#: ../../install_steps_interactive.pm_.c:950
-msgid "LDAP Base dn"
-msgstr "LDAP ªº dn Äæ¦ì"
-
-#: ../../install_steps_interactive.pm_.c:951
-msgid "LDAP Server"
-msgstr "LDAP ¦øªA¥D¾÷"
-
-#: ../../install_steps_interactive.pm_.c:957
-msgid "Authentication NIS"
-msgstr "NIS »{ÃÒ"
-
-#: ../../install_steps_interactive.pm_.c:958
-msgid "NIS Domain"
-msgstr "NIS °ì¦W"
-
-#: ../../install_steps_interactive.pm_.c:959
-msgid "NIS Server"
-msgstr "NIS ¦øªA¥D¾÷"
-
-#: ../../install_steps_interactive.pm_.c:994
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"»s§@¤@¶ô¶}¾÷¤ù¥i¥HÅý±z¤£¥²¨Ì¾aµwºÐ¤Wªº¶}¾÷\n"
-"µ{¦¡´N¥i¥H¶}¾÷¶i¤J±zªº Linux ¨t²Î¡A·í±z¤£§Æ\n"
-"±æ¦b¨t²Î¤W¦w¸Ë SILO ªº®É­Ô·|«Ü¦³¥Î¡A\n"
-"©ÎªÌ·í¨ä¥L§@·~¨t²Î»\±¼ SILO¡B·í SILO ¦b±zªºµw\n"
-"Åé¤WµLªk¥¿±`¹B§@ªº®É­Ô¡A¦³¤@¶ô¶}¾÷¤ù±N·|Åý±z\n"
-"¬Ù¨Æ¤£¤Ö¡A¦¹¥~¡A³o¶ô¶}¾÷¤ùÁÙ¥i¥H¸ò Mandrake ´£\n"
-"¨Ñªº±Ï´©ºÏ¤ù (rescue disk) ¤@°_¨Ï¥Î¡AÅý±z¦b¨t²Î\n"
-"µo¥Í°ÝÃD®É¥i¥H¶}¾÷¶i¥h¶i¦æ­×´_ªº¤u§@¡C\n"
-"­Y±z§Æ±æ¦w¸Ëµ{¦¡À°±z»s§@¤@±i¶}¾÷ºÏ¤ùªº¸Ü¡A½Ð¦b\n"
-"³nºÐ¾÷¸Ì­±´¡¤J¤@¶ôºÏ¤ù¨Ã¿ï¨ú \"½T©w\"¡C"
-
-#: ../../install_steps_interactive.pm_.c:1010
-msgid "First floppy drive"
-msgstr "²Ä¤@¥x³nºÐ"
-
-#: ../../install_steps_interactive.pm_.c:1011
-msgid "Second floppy drive"
-msgstr "²Ä¤G¥x³nºÐ"
-
-#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
-msgid "Skip"
-msgstr "¸õ¹L"
-
-#: ../../install_steps_interactive.pm_.c:1017
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-msgstr ""
-"»s§@¤@¶ô¶}¾÷¤ù¥i¥HÅý±z¤£¥²¨Ì¾aµwºÐ¤Wªº¶}¾÷\n"
-"µ{¦¡´N¥i¥H¶}¾÷¶i¤J±zªº Linux ¨t²Î¡A·í±z¤£§Æ\n"
-"±æ¦b¨t²Î¤W¦w¸Ë LILO (©Î grub) ªº®É­Ô·|«Ü¦³¥Î¡A\n"
-"©ÎªÌ·í¨ä¥L§@·~¨t²Î»\±¼ LILO¡B·í LILO ¦b±zªºµw\n"
-"Åé¤WµLªk¥¿±`¹B§@ªº®É­Ô¡A¦³¤@¶ô¶}¾÷¤ù±N·|Åý±z\n"
-"¬Ù¨Æ¤£¤Ö¡A¦¹¥~¡A³o¶ô¶}¾÷¤ùÁÙ¥i¥H¸ò Mandrake ´£\n"
-"¨Ñªº±Ï´©ºÏ¤ù (rescue disk) ¤@°_¨Ï¥Î¡AÅý±z¦b¨t²Î\n"
-"µo¥Í°ÝÃD®É¥i¥H¶}¾÷¶i¥h¶i¦æ­×´_ªº¤u§@¡F±z§Æ±æ\n"
-"¦w¸Ëµ{¦¡À°±z»s§@¤@±i¶}¾÷ºÏ¤ù¶Ü?"
-
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sorry, no floppy drive available"
-msgstr "¤£¦n·N«ä¡A§ä¤£¨ì³nºÐ¾÷"
-
-#: ../../install_steps_interactive.pm_.c:1030
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "¿ï¾Ü­n¥Î¨Ó»s§@¶}¾÷ºÏ¤ùªº³nºÐ¾÷"
-
-#: ../../install_steps_interactive.pm_.c:1034
-#, c-format
-msgid "Insert a floppy in drive %s"
-msgstr "½Ð¦b %s ¤¤´¡¤J³nºÐ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:1037
-msgid "Creating bootdisk"
-msgstr "¥¿¦b»s§@¶}¾÷ºÏ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Preparing bootloader"
-msgstr "¥¿¦b·Ç³Æ¶}¾÷µ{¦¡"
-
-#: ../../install_steps_interactive.pm_.c:1055
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"±zªº¨t²Î¦ü¥G¦³ OldWorld ©ÎªÌ¬O¨ä¥L¤£»{ÃѪº¶µ¥Ø¡A\n"
-"³o±N·|¾É­Pyaboot ¶}¾÷±Ò°Êµ{¦¡µLªk¥¿±`¹B§@¡C¦w¸ËÁÙ¬O·|\n"
-"Ä~Äò¤U¥h¡A¤£¹L±z¤]³\»Ý­n¨Ï¥Î bootX ¨Ó±Ò°Ê§Aªº¹q¸£¡C"
-
-#: ../../install_steps_interactive.pm_.c:1060
-msgid "Do you want to use aboot?"
-msgstr "±z­n¨Ï¥Î aboot ¶Ü ?"
-
-#: ../../install_steps_interactive.pm_.c:1063
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"¦w¸Ë aboot ®Éµo¥Í¿ù»~¡A\n"
-"§A­n«_µÛ¥i¯à·´·l²Ä¤@­Ó¤À³Î°Ïªº±jªp±j­¢¦A¦¸¦w¸Ë¶Ü¡H"
-
-#: ../../install_steps_interactive.pm_.c:1070
-msgid "Installing bootloader"
-msgstr "¥¿¦b¦w¸Ë¶}¾÷µ{¦¡"
-
-#: ../../install_steps_interactive.pm_.c:1076
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "¶}¾÷µ{¦¡¦w¸Ë¥¢±Ñ¡Aµo¥Í¦p¤U¤§¿ù»~¡G"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"±z¤]³\»Ý­n§ïÅܱzªº Open Firmware ¤W­±ªº¶}¾÷¸Ë¸m³]©w¡A¥H«K©ó¶}±Ò\n"
-"¶}¾÷±Ò°Êµ{¦¡ªº¥\¯à¡C¦pªG±z¶}¾÷®É¨Ã¨S¦³¶}¨ì¶}¾÷µ{¦¡ªº¥ô¦ó°T®§¡A\n"
-"©ó­«·s¶}¾÷®É«ö¦í Command-Option-O-F¡AµM«á¿é¤J:\n"
-"setenv boot-device %s,\\\\:tbxi\n"
-"µM«á¦A¿é¤J: shut-down\n"
-"µM«á§A¤U¤@¦¸¶}¾÷®ÉÀ³¸Ó´N¥i¥H¬Ý¨ì¶}¾÷±Ò°Êµ{¦¡ªº°T®§¤F¡C"
-
-#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
-msgid "Low"
-msgstr "§C"
-
-#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
-msgid "Medium"
-msgstr "¤¤"
-
-#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
-msgid "High"
-msgstr "°ª"
-
-#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
-msgid "Choose security level"
-msgstr "¿ï¨ú¦w¥þµ¥¯Å"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#: ../../standalone/drakautoinst_.c:80
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "½Ð¦b %s ¤¤´¡¤J¤@¤ùªÅ¥ÕºÏ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:1138
-#: ../../standalone/drakautoinst_.c:82
-msgid "Creating auto install floppy"
-msgstr "¥¿¦b»s§@¦Û°Ê¦w¸ËºÏ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:1149
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"ÁÙ¦³¨Ç¨BÆJ¨S¦³§¹¦¨¡A\n"
-"\n"
-"±z¯uªº¨M©w°¨¤Wµ²§ôµ{¦¡?"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from http://www.mandrakelinux.com/.\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"®¥³ß!! ¦w¸Ëµ{§Ç§¹¦¨¤F¡A½Ð²¾¨«¶}¾÷¥úºÐ©Î³nºÐ¡A\n"
-"±µµÛ«ö return Áä­«·s¶}¾÷¡C\n"
-"\n"
-"­nÀò±o Mandrake Linux ªº¬ÛÃö¸ê°T©Îµ{¦¡­×¥¿°T®§ªº¸Ü¡A\n"
-"½Ð°Ñ¦Ò Mandrake ¤½¥qªººô­¶¥H¤Îµ{¦¡°É»~ªí: \n"
-"http://www.mandrakelinux.com/\n"
-"\n"
-"Ãö©ó³]©w¨t²Îªº¸ê°T¡A±z¥i¥H¦b¥¿ª© Mandrake Linux ¨Ï¥Î\n"
-"¤â¥U (Official Mandrake Linux User's Guide) ¸Ì­±§ä¨ì¡C"
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid "Generate auto install floppy"
-msgstr "»s§@¦Û°Ê¦w¸ËºÏ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:1174
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"¦Û°Ê¦w¸Ë¥\¯à¡A¥i¥H§¹¥þº¡¨¬±z§Æ±æ¯à°÷¦Û°Ê¤Æªº¦b¤@¥x\n"
-"¹q¸£¤W¶i¦æ¨t²Î¦w¸Ëªº°Ê§@¡C\n"
-"\n"
-"³o­Ó¥\¯à¡A±z´N¥i¥H¶i¦æ©Ò¿×ªº¦Û°Ê¤Æ¶i¦æ¦w¸Ëªº¾÷¨î¡C\n"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Automated"
-msgstr "¦Û°Ê¤Æ"
-
-#: ../../install_steps_interactive.pm_.c:1179
-msgid "Replay"
-msgstr "­«¼½"
-
-#: ../../install_steps_interactive.pm_.c:1182
-msgid "Save packages selection"
-msgstr "Àx¦s©Ò¿ï¨úªºÀÉ®×"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux ¦w¸Ëµ{¦¡ %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr "  <Tab>/<Alt-Tab> ¦b¶µ¥Ø¶¡²¾°Ê    | <Space> ¿ï¨ú    | <F12> ¤U­Ó¿Ã¹õ"
-
-#: ../../interactive.pm_.c:73
-msgid "kdesu missing"
-msgstr "kdesu µ{¦¡¤£¨£¤F"
-
-#: ../../interactive.pm_.c:132
-msgid "Choose a file"
-msgstr "¿ï¾ÜÀÉ®×"
-
-#: ../../interactive.pm_.c:284
-msgid "Advanced"
-msgstr "¶i¶¥"
-
-#: ../../interactive.pm_.c:345
-msgid "Please wait"
-msgstr "½Ðµy­Ô"
-
-#: ../../interactive_gtk.pm_.c:681
-msgid "Expand Tree"
-msgstr "®i¶}¾ðª¬µ²ºc"
-
-#: ../../interactive_gtk.pm_.c:682
-msgid "Collapse Tree"
-msgstr "ÁYÅ|¾ðª¬µ²ºc"
-
-#: ../../interactive_gtk.pm_.c:683
-msgid "Toggle between flat and group sorted"
-msgstr "¤Á´«¬O§_¨Ì·Ó¸s²Õ¨Ó¥[¥H±Æ§Ç"
-
-#: ../../interactive_stdio.pm_.c:35
-#, c-format
-msgid "Ambiguity (%s), be more precise\n"
-msgstr "¤£©ú½T (%s), »Ý­n§ó¥[ºë½T\n"
-
-#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
-#: ../../interactive_stdio.pm_.c:71
-msgid "Bad choice, try again\n"
-msgstr "Ãa¿ï¾Ü¡A½Ð¦A¸Õ¤@¹M\n"
-
-#: ../../interactive_stdio.pm_.c:39
-#, c-format
-msgid " ? (default %s) "
-msgstr " ? (¹w³] %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "±zªº¿ï¾Ü? (¹w³]¬° %s) "
-
-#: ../../interactive_stdio.pm_.c:72
-#, c-format
-msgid "Your choice? (default %s  enter `none' for none) "
-msgstr "±zªº¿ï¾Ü? (¹w³]¬° %s¡A¿é¤J `none' ¥Nªí¨S¦³) "
-
-#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
-msgid "Czech (QWERTZ)"
-msgstr "±¶§J (QWERTZ)"
-
-#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
-msgid "German"
-msgstr "¼w°ê"
-
-#: ../../keyboard.pm_.c:142
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
-msgid "Spanish"
-msgstr "¦è¯Z¤ú"
-
-#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
-msgid "Finnish"
-msgstr "ªâÄõ"
-
-#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
-msgid "French"
-msgstr "ªk°ê"
-
-#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
-msgid "Norwegian"
-msgstr "®¿«Â"
-
-#: ../../keyboard.pm_.c:147
-msgid "Polish"
-msgstr "ªiÄõ"
-
-#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
-msgid "Russian"
-msgstr "«Xù´µ"
-
-#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
-msgid "Swedish"
-msgstr "·ç¨å"
-
-#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
-msgid "UK keyboard"
-msgstr "­^¦¡Áä½L"
-
-#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
-msgid "US keyboard"
-msgstr "¬ü¦¡Áä½L"
-
-#: ../../keyboard.pm_.c:159
-msgid "Albanian"
-msgstr "ªüº¸¤Ú¥§¨È"
-
-#: ../../keyboard.pm_.c:160
-msgid "Armenian (old)"
-msgstr "¨È¬ü¥§¨È (old)"
-
-#: ../../keyboard.pm_.c:161
-msgid "Armenian (typewriter)"
-msgstr "¨È¬ü¥§¨È (typewriter)"
-
-#: ../../keyboard.pm_.c:162
-msgid "Armenian (phonetic)"
-msgstr "¨È¬ü¥§¨È (phonetic)"
-
-#: ../../keyboard.pm_.c:167
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:169
-msgid "Belgian"
-msgstr "¤ñ§Q®É"
-
-#: ../../keyboard.pm_.c:170
-msgid "Bulgarian"
-msgstr "«O¥[§Q¨È"
-
-#: ../../keyboard.pm_.c:171
-msgid "Brazilian (ABNT-2)"
-msgstr "¤Ú¦è (ABNT-2)"
-
-#: ../../keyboard.pm_.c:172
-msgid "Belarusian"
-msgstr "Belarusian"
-
-#: ../../keyboard.pm_.c:173
-msgid "Swiss (German layout)"
-msgstr "·ç¤h (¼w°ê¦¡°t¸m)"
-
-#: ../../keyboard.pm_.c:174
-msgid "Swiss (French layout)"
-msgstr "·ç¤h (ªk°ê¦¡°t¸m)"
-
-#: ../../keyboard.pm_.c:179
-msgid "Czech (QWERTY)"
-msgstr "±¶§J (QWERTY)"
-
-#: ../../keyboard.pm_.c:181
-msgid "German (no dead keys)"
-msgstr "¼w°ê (no dead keys)"
-
-#: ../../keyboard.pm_.c:182
-msgid "Danish"
-msgstr "¤¦³Á"
-
-#: ../../keyboard.pm_.c:183
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:184
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegian)"
-
-#: ../../keyboard.pm_.c:185
-msgid "Estonian"
-msgstr "·R¨F¥§¨È"
-
-#: ../../keyboard.pm_.c:189
-msgid "Georgian (\"Russian\" layout)"
-msgstr "³ìªv¨È (\"«X°ê¦¡\" °t¸m)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Georgian (\"Latin\" layout)"
-msgstr "³ìªv¨È (\"©Ô¤B¦¡\" °t¸m)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Greek"
-msgstr "§Æþ"
-
-#: ../../keyboard.pm_.c:192
-msgid "Hungarian"
-msgstr "¦I¤ú§Q"
-
-#: ../../keyboard.pm_.c:193
-msgid "Croatian"
-msgstr "§Jù®J¦è¨È"
-
-#: ../../keyboard.pm_.c:194
-msgid "Israeli"
-msgstr "¥H¦â¦C"
-
-#: ../../keyboard.pm_.c:195
-msgid "Israeli (Phonetic)"
-msgstr "¥H¦â¦C (­µ¼Ð)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Iranian"
-msgstr "¥ì®Ô"
-
-#: ../../keyboard.pm_.c:197
-msgid "Icelandic"
-msgstr "¦B®q"
-
-#: ../../keyboard.pm_.c:198
-msgid "Italian"
-msgstr "¸q¤j§Q"
-
-#: ../../keyboard.pm_.c:200
-msgid "Japanese 106 keys"
-msgstr "¤é¥» 106 Áä"
-
-#: ../../keyboard.pm_.c:201
-msgid "Korean keyboard"
-msgstr "Áú¦¡Áä½L"
-
-#: ../../keyboard.pm_.c:202
-msgid "Latin American"
-msgstr "©Ô¤B¬ü¬w"
-
-#: ../../keyboard.pm_.c:203
-msgid "Lithuanian AZERTY (old)"
-msgstr "¥ß³³©{ ( AZERTY ¦¡)"
-
-#: ../../keyboard.pm_.c:205
-msgid "Lithuanian AZERTY (new)"
-msgstr "¥ß³³©{ (·s AZERTY ¦¡)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "¥ß³³©{ (number row, QWERTY ¦¡)"
-
-#: ../../keyboard.pm_.c:207
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "¥ß³³©{ (phonetic, QWERTY ¦¡)"
-
-#: ../../keyboard.pm_.c:208
-msgid "Latvian"
-msgstr "©Ô¦«ºû¨È"
-
-#: ../../keyboard.pm_.c:209
-msgid "Macedonian"
-msgstr "°¨¨ä¹y"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dutch"
-msgstr "²üÄõ"
-
-#: ../../keyboard.pm_.c:212
-msgid "Polish (qwerty layout)"
-msgstr "ªiÄõ (qwerty ¦¡°t¸m)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Polish (qwertz layout)"
-msgstr "ªiÄõ (qwertz ¦¡°t¸m)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Portuguese"
-msgstr "¸²µå¤ú"
-
-#: ../../keyboard.pm_.c:215
-msgid "Canadian (Quebec)"
-msgstr "¥[®³¤j (»í¥_§J)"
-
-#: ../../keyboard.pm_.c:217
-msgid "Romanian (qwertz)"
-msgstr "ù°¨¥§¨È (qwertz)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Romanian (qwerty)"
-msgstr "ù°¨¥§¨È (qwerty)"
-
-#: ../../keyboard.pm_.c:220
-msgid "Russian (Yawerty)"
-msgstr "«Xù´µ (Yawerty)"
-
-#: ../../keyboard.pm_.c:222
-msgid "Slovenian"
-msgstr "´µ¬¥ªk¥§¨È"
-
-#: ../../keyboard.pm_.c:226
-msgid "Slovakian (QWERTZ)"
-msgstr "´µ¬¥ªk§J (QWERTZ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Slovakian (QWERTY)"
-msgstr "´µ¬¥ªk§J (QWERTY)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Serbian (cyrillic)"
-msgstr "¶ëº¸ºû¨È¤H (cyrillic)"
-
-#: ../../keyboard.pm_.c:230
-msgid "Thai keyboard"
-msgstr "®õ¦¡Áä½L"
-
-#: ../../keyboard.pm_.c:232
-msgid "Tajik keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:233
-msgid "Turkish (traditional \"F\" model)"
-msgstr "¤g¦Õ¨ä (¶Ç²Î¦¡ \"F\" «¬)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Turkish (modern \"Q\" model)"
-msgstr "¤g¦Õ¨ä (²{¥N¦¡ \"Q\" «¬)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Ukrainian"
-msgstr "¯Q§JÄõ"
-
-#: ../../keyboard.pm_.c:238
-msgid "US keyboard (international)"
-msgstr "¬ü¦¡Áä½L (°ê»Ú³q¥Î«¬)"
-
-#: ../../keyboard.pm_.c:239
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "¶V«n \"numeric row\" QWERTY ¦¡"
-
-#: ../../keyboard.pm_.c:240
-msgid "Yugoslavian (latin)"
-msgstr "«n´µ©Ô¤Ò (©Ô¤B¦¡°t¸m)"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "%s ³Q´`Àô±¾¸ü\n"
-
-#: ../../lvm.pm_.c:83
-msgid "Remove the logical volumes first\n"
-msgstr "¥ý²¾°£ logical volume ¸Ë¸m\n"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - ·Æ¹«"
-
-#: ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "¼Ð·Ç"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "¤@¯ë PS/2 Wheel ·Æ¹«"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
-msgid "1 button"
-msgstr "¤@­Ó«öÁä"
-
-#: ../../mouse.pm_.c:44
-msgid "Generic"
-msgstr "¤@¯ë"
-
-#: ../../mouse.pm_.c:45
-msgid "Wheel"
-msgstr "ºu½ü"
-
-#: ../../mouse.pm_.c:48
-msgid "serial"
-msgstr "§Ç¦C"
-
-#: ../../mouse.pm_.c:50
-msgid "Generic 2 Button Mouse"
-msgstr "¤@¯ëªº¨âÁ䦡·Æ¹«"
-
-#: ../../mouse.pm_.c:51
-msgid "Generic 3 Button Mouse"
-msgstr "¤@¯ëªº¤TÁ䦡·Æ¹«"
-
-#: ../../mouse.pm_.c:52
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Logitech MouseMan"
-msgstr "Logitech Bus Mouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:56
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:59
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:60
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:61
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serial, old C7 type)"
-
-#: ../../mouse.pm_.c:65
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:68
-msgid "2 buttons"
-msgstr "¨â­Ó«öÁä"
-
-#: ../../mouse.pm_.c:69
-msgid "3 buttons"
-msgstr "¤T­Ó«öÁä"
-
-#: ../../mouse.pm_.c:72
-msgid "none"
-msgstr "µL"
-
-#: ../../mouse.pm_.c:74
-msgid "No mouse"
-msgstr "¨S¦³·Æ¹«"
-
-#: ../../mouse.pm_.c:482
-msgid "Please test the mouse"
-msgstr "½Ð´ú¸Õ·Æ¹«"
-
-#: ../../mouse.pm_.c:483
-msgid "To activate the mouse,"
-msgstr "¬°¤FÅý±zªº·Æ¹«¯à°÷¨Ï¥Î"
-
-#: ../../mouse.pm_.c:484
-msgid "MOVE YOUR WHEEL!"
-msgstr "²¾°Ê±zªººu½ü !"
-
-#: ../../my_gtk.pm_.c:380
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Finish"
-msgstr "§¹¦¨"
-
-#: ../../my_gtk.pm_.c:415
-msgid "Next ->"
-msgstr "¤U¤@¨B ->"
-
-#: ../../my_gtk.pm_.c:416
-msgid "<- Previous"
-msgstr "<- ¤W¤@¨B"
-
-#: ../../my_gtk.pm_.c:716
-msgid "Is this correct?"
-msgstr "³o¼Ë¤l¥¿½T¶Ü¡H"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "³s½u¨ì Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"±`¨£¼·±µ¦¡ ADSL ´N¬O¨Ï¥Î pppoe µ{¦¡¡C\n"
-"¦³¨Ç³s½u¬O¨Ï¥Î pptp µ{¦¡¡A¬Æ¦Ü¦³ªº¬O¨Ï¥Î dhcp¡C\n"
-"­Y¬O±z¤£²M·¡ªº¸Ü¡A½Ð¿ï¾Ü¨Ï¥Î pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "¨Ï¥Î dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "¨Ï¥Î pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "¨Ï¥Î PPTP"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"±z­n¨Ï¥Î­þ¤@­Ó dhcp ¨Ï¥ÎºÝµ{¦¡?\n"
-"¹w³]¬O¥Î dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr "¨t²Î°»´ú¤£¨ì¦³¥ô¦óºô¸ô¥dªº¦w¸Ë¡C©Ò¥HµLªk³]©w³sµ²Ãþ«¬¡C"
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
-msgid "Choose the network interface"
-msgstr "¿ï¨úºô¸ô¤¶­±"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "½Ð¿ï¾Ü±z­n¥Î¨Ó³s¤W Internet ªººô¸ô¥d"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "§ä¤£¨ìºô¸ô¥d"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
-msgid "Configuring network"
-msgstr "³]©wºô¸ô¤¤"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"½Ð¿é¤J±zªº¥D¾÷¦WºÙ¡A¬Y¨Ç DHCP ¥D¾÷·|­n¨D¦³\n"
-"¥D¾÷¦WºÙ¤~¯à¨Ï¥Î¡A±zªº¥D¾÷¦WºÙÀ³¸Ó­n¬O¤@­Ó\n"
-"¦X®æ¥D¾÷¥þ¦W (FQDN)¡A¦p ``mybox.mylab.myco.com''¡C"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
-msgid "Host name"
-msgstr "¥D¾÷¦WºÙ:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
-#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
-#: ../../network/netconnect.pm_.c:221
-msgid "Network Configuration Wizard"
-msgstr "ºô¸ô³]©wºëÆF"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "¥~³¡ ISDN Modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "¤º³¡ ISDN ¤¶­±¥d"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "±zªº ISDN ³s½uºØÃþ¬°¦ó ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"±z­n¨Ï¥Î¨º¤@ºØ ISDN ²ÕºA¡H\n"
-"\n"
-"* ªº²ÕºA³]©w¬O¨Ï¥Î isdn4net¡A¥¦¥]§t³\¦h«Ü¦n¥Îªº¤u¨ã¡A¦ý¬O\n"
-"  ¦ý¬O³o­Óµ{¦¡«ÜÃø³]©w¡A¤]¤£¬O«Ü¼Ð·Ç¡C\n"
-"\n"
-"* ·sªº²ÕºA³]©w¤ñ¸û®e©ö¤F¸Ñ¡A¤]§ó¼Ð·Ç¡A¥u¤£¹L¥i¥Îªº¤u¨ã·|¤Ö¤@ÂI¡C\n"
-"\n"
-"«Øij±z¨Ï¥Î light ²ÕºA³]©w¸û¨Î¡C\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "·sªº²ÕºA³]©w (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "ªº²ÕºA³]©w (isdn4net)"
-
-#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
-#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
-#: ../../network/isdn.pm_.c:214
-msgid "ISDN Configuration"
-msgstr "ISDN ³]©w"
-
-#: ../../network/isdn.pm_.c:169
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"¿ï¾Ü±zªº ISP ¼t°Ó¡C\n"
-" ¦pªG¨Ã¨S¦³¥]§t¦b²M³æ¤º¡A½Ð¿ï¾Ü¥¼¦C¦b²M³æ¤º"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol"
-msgstr "Europe ³q°T¨ó©w"
-
-#: ../../network/isdn.pm_.c:182
-msgid "Europe protocol (EDSS1)"
-msgstr "Europe ³q°T¨ó©w (EDSS1)"
-
-#: ../../network/isdn.pm_.c:184
-msgid "Protocol for the rest of the world"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:184
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:188
-msgid "Which protocol do you want to use ?"
-msgstr "±z­n¨Ï¥Î¨º­Ó³q°T¨ó©w ?"
-
-#: ../../network/isdn.pm_.c:198
-msgid "What kind of card do you have?"
-msgstr "±zªº¥dÄݩ󨺺اΦ¡?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "I don't know"
-msgstr "¤£ª¾¹D"
-
-#: ../../network/isdn.pm_.c:199
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:199
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:205
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"¦pªG¨t²Î¦w¸Ëªº¬O ISA ¤¶­±¥d¡A¤U¤@­Ó¿Ã¹õ©ÒÅã¥Üªº¼Æ­ÈÀ³¸Ó¬O¥¿½Tªº¡C\n"
-"\n"
-"¦pªG¨t²Î¦w¸Ëªº¬O PCMCIA ¤¶­±¥d¡A¨º±zÀ³¸Ó­nª¾¹D³o±i¥dªº IO Port »P IRQ¡C\n"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Abort"
-msgstr "¤¤Â_"
-
-#: ../../network/isdn.pm_.c:209
-msgid "Continue"
-msgstr "Ä~Äò"
-
-#: ../../network/isdn.pm_.c:215
-msgid "Which is your ISDN card ?"
-msgstr "±zªº ISDN ¥d¬°¦ó ?"
-
-#: ../../network/isdn.pm_.c:234
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"°»´ú¨ì ISDN PCI ¥d¡A¦ý¬O¤£²M·¡¬O¨º­ÓÃþ«¬¡C½Ð¦b¤U¤@­Ó¿Ã¹õ¿ï¾Ü³o±i¥dªºÃþ«¬¡C"
-
-#: ../../network/isdn.pm_.c:243
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "§ä¤£¨ì ISDN PCI ¤¶­±¥d¡A½Ð¦b¤U¤@­Ó¿Ã¹õ¤â°Ê¿ï¾Ü¤@±i¡C"
-
-#: ../../network/modem.pm_.c:37
-msgid "Please choose which serial port your modem is connected to."
-msgstr "½Ð¿ï¨ú±z¼Æ¾Ú¾÷³s±µªº§Ç¦C°ð¡C"
-
-#: ../../network/modem.pm_.c:42
-msgid "Dialup options"
-msgstr "¼·¸¹¿ï¶µ"
-
-#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
-msgid "Connection name"
-msgstr "³s½u¦WºÙ"
-
-#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
-msgid "Phone number"
-msgstr "¹q¸Ü¸¹½X"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
-msgid "Login ID"
-msgstr "µn¤Jªº±b¸¹ ID"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Script-based"
-msgstr "¥Î script ³s½u"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
-msgid "Terminal-based"
-msgstr "¥Î²×ºÝ¾÷³s½u"
-
-#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
-msgid "Domain name"
-msgstr "ºô°ì¦WºÙ"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
-msgid "First DNS Server (optional)"
-msgstr "²Ä¤@¥xºô°ì¦WºÙ¦øªA¾¹ (¥i¤£¿é¤J)"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
-msgid "Second DNS Server (optional)"
-msgstr "²Ä¤Gºô°ì¦WºÙ¦øªA¾¹ (¥i¤£¿é¤J)"
-
-#: ../../network/netconnect.pm_.c:33
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"±z¥i¥H¤ÁÂ_³s½u©ÎªÌ¬O­«·s³]©w±zªº³s½u¡C"
-
-#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"±z¥i¥H­«·s³]©w±zªº³s½u¡C"
-
-#: ../../network/netconnect.pm_.c:33
-msgid "You are currently connected to internet."
-msgstr "±z¥Ø«e¥¿³s½u¨ì Internet¡C"
-
-#: ../../network/netconnect.pm_.c:36
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"±z¥i¥H³s½u¨ì Internet ©ÎªÌ¬O­«·s³]©w±zªº³s½u¡C"
-
-#: ../../network/netconnect.pm_.c:36
-msgid "You are not currently connected to Internet."
-msgstr "±z¥Ø«e¨Ã¨S¦³³s½u¨ì Internet¡C"
-
-#: ../../network/netconnect.pm_.c:40
-msgid "Connect to Internet"
-msgstr "³s½u¨ì Internet"
-
-#: ../../network/netconnect.pm_.c:42
-msgid "Disconnect from Internet"
-msgstr "¤ÁÂ_ Internet ³s½u"
-
-#: ../../network/netconnect.pm_.c:44
-msgid "Configure network connection (LAN or Internet)"
-msgstr "³]©wºô¸ô³s½u¤è¦¡ (°Ï°ìºô¸ô©ÎªÌ¬O Internet)"
-
-#: ../../network/netconnect.pm_.c:47
-msgid "Internet connection & configuration"
-msgstr "Intenet ³s½u»P³]©w"
-
-#: ../../network/netconnect.pm_.c:96
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "·Ç³Æ³]©w %s ªº³s½u¡C"
-
-#: ../../network/netconnect.pm_.c:105
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"·Ç³Æ³]©w %s ªº³s½u¡C\n"
-"\n"
-"\n"
-"«ö½T©wÄ~Äò¡C"
-
-#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
-#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
-msgid "Network Configuration"
-msgstr "ºô¸ô³]©w"
-
-#: ../../network/netconnect.pm_.c:130
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"¦]¬°±z¬O³z¹Lºô¸ô¦w¸Ë¡A©Ò¥H±zªººô¸ô²ÕºA¤w¸g³]©w¹L¤F¡C±z¥i¥HÂI¿ï½T©w¨Ï¥Î\n"
-"­ì¥»ºô¸ôªº³]©w²ÕºA¡A©ÎªÌ¬O¿ï¨ú¨ú®ø¨Ó­«·s³]©wºô¸ô³s½u¤è¦¡¡C\n"
-
-#: ../../network/netconnect.pm_.c:155
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Åwªï¨Ó¨ìºô¸ô³]©wºëÆF\n"
-"\n"
-"¥Ø«e¥¿·Ç³Æ¨Ó³]©w±zªººô¸ô³s½u¡C\n"
-"¦pªG±z¤£§Æ±æ¨t²Î¦Û°Ê°»´úªº¸Ü¡A¤£­n¿ï¨ú³o­Ó¶µ¥Ø¡C\n"
-
-#: ../../network/netconnect.pm_.c:157
-msgid "Choose the profile to configure"
-msgstr "½Ð¿ï¨ú­n³]©wªº¶µ¥Ø"
-
-#: ../../network/netconnect.pm_.c:158
-msgid "Use auto detection"
-msgstr "¨Ï¥Î¦Û°Ê°»´ú"
-
-#: ../../network/netconnect.pm_.c:164
-msgid "Detecting devices..."
-msgstr "¥¿¦b°»´ú¸Ë¸m..."
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-msgid "Normal modem connection"
-msgstr "¤@¯ë modem ³s½u¤è¦¡"
-
-#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
-#, c-format
-msgid "detected on port %s"
-msgstr "©ó port %s °»´ú¨ì"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-msgid "ISDN connection"
-msgstr "ISDN ³s½u"
-
-#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
-#, c-format
-msgid "detected %s"
-msgstr "°»´ú¨ì %s "
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-msgid "ADSL connection"
-msgstr "ADSL ³s½u"
-
-#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
-#, c-format
-msgid "detected on interface %s"
-msgstr "©ó %s ¤¶­±°»´ú¨ì"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "Cable connection"
-msgstr "Cable ³s½u"
-
-#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
-msgid "cable connection detected"
-msgstr "°»´ú¨ì cable ³s½u"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "LAN connection"
-msgstr "°Ï°ìºô¸ô³s½u"
-
-#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
-msgid "ethernet card(s) detected"
-msgstr "°»´ú¨ì ethernet ºô¸ô¥d"
-
-#: ../../network/netconnect.pm_.c:190
-msgid "Choose the connection you want to configure"
-msgstr "¿ï¾Ü±z­n³]©wªº³s½u¶µ¥Ø"
-
-#: ../../network/netconnect.pm_.c:214
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"±z¤w¸g¿ï¾Ü³]©w¦h­Ó¯à°÷³s½u¨ì Internet ªº¤è¦¡¡C\n"
-"½Ð±z¿ï¾Ü¨ä¤¤¤@­Ó­n¨Ï¥Îªº¶µ¥Ø¡C\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:215
-msgid "Internet connection"
-msgstr "Internet ³s½u"
-
-#: ../../network/netconnect.pm_.c:221
-msgid "Do you want to start the connection at boot?"
-msgstr "±z­n¦b¶}¾÷®É¦Û°Ê±Ò°Ê¸Ó³s½u¶Ü¡H"
-
-#: ../../network/netconnect.pm_.c:239
-msgid "Network configuration"
-msgstr "ºô¸ô³]©w"
-
-#: ../../network/netconnect.pm_.c:240
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:243
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"­«·s±Ò°Êºô¸ô®Éµo¥Í¤F¤U­±ªº¿ù»~:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:247
-msgid ""
-"Congratulations, the network and internet configuration is finished.\n"
-"\n"
-"The configuration will now be applied to your system.\n"
-msgstr "®¥³ß ! ºô¸ô³]©w²ÕºA¤w¸g³]©w§¹¦¨¤F¡C±zªº¨t²Î¤w¸g¯à°÷¨Ï¥Î¸Ó³]©w¡C\n"
-
-#: ../../network/netconnect.pm_.c:250
-msgid ""
-"After that is done, we recommend you to restart your X\n"
-"environnement to avoid hostname changing problem."
-msgstr ""
-"¦b§¹¦¨³o­Ó¶µ¥Ø«á¡A§Ú«Øij±z­«·s±Ò°Ê±zªº X Àô¹Ò¡A¥HÁקK¦]¬°±z\n"
-"½Õ¾ã¤F¥D¾÷¦WºÙ³y¦¨ X ±Ò°Ê¤Wªº¤@¨Ç°ÝÃD¡C"
-
-#: ../../network/network.pm_.c:283
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ĵ§i: ³o­Ó¸Ë¸m¥ý«e¤w¸g³Q³]©w³Ì¬°³s½u¨ì Internet ªº¶µ¥Ø¤F¡C\n"
-"­Y¬O±z­nºû«ù³o­Ó¸Ë¸mªº³]©w¡A½Ð¿ï¾Ü±µ¨ü¡C\n"
-"­Y¬O±z­×§ï¤U­±Äæ¦ì¡A±N·|­â¶V­ì¥»ªº³]©w¡C"
-
-#: ../../network/network.pm_.c:288
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"½Ð¿é¤J³o¥x¥D¾÷ªº IP ³]©w­È¡A³oÃ䪺¨C­Ó¶µ¥Øªº®æ¦¡\n"
-"³£À³¸Ó¥Î¤p¼ÆÂI¶¡¹jªº¥|­Ó¤Q¶i¦ìªü©Ô§B¼Æ¦r¨Ó¿é¤J \n"
-"(¨Ò¦p 1.2.3.4)¡C"
-
-#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
-#, c-format
-msgid "Configuring network device %s"
-msgstr "¥¿¦b³]©wºô¸ô¸Ë¸m %s"
-
-#: ../../network/network.pm_.c:298
-#, c-format
-msgid " (driver %s)"
-msgstr "(driver %s)"
-
-#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
-#: ../../standalone/draknet_.c:461
-msgid "IP address"
-msgstr "IP ¦ì§}:"
-
-#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
-msgid "Netmask"
-msgstr "ºô¸ô¾B¸n:"
-
-#: ../../network/network.pm_.c:302
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:302
-msgid "Automatic IP"
-msgstr "¦Û°Ê¤À°t IP"
-
-#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ¦ì§}¥²¶·­n¥ÎÃþ¦ü 1.2.3.4 ªº®æ¦¡¨Ó¿é¤J"
-
-#: ../../network/network.pm_.c:351
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"½Ð¿é¤J±zªº¥D¾÷¦WºÙ¡A\n"
-"±zªº¥D¾÷¦WºÙÀ³¸Ó¬O¤@­Ó¦X®æªº¥D¾÷¥þ¦W (FQDN)¡A\n"
-"Ãþ¦ü ``mybox.mylab.myco.com'' ªº®æ¦¡¡F°²¦p±z¦³\n"
-"¨Ï¥Î¹h¹D¾¹ªº¸Ü¡A¤]½Ð¦b³oÃä¿é¤J¹h¹D¾¹ªº IP ¦ì§}¡C"
-
-#: ../../network/network.pm_.c:356
-msgid "DNS server"
-msgstr "DNS ¦øªA¾¹"
-
-#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
-msgid "Gateway"
-msgstr "¹h¹D"
-
-#: ../../network/network.pm_.c:359
-msgid "Gateway device"
-msgstr "¹h¹D¸Ë¸m"
-
-#: ../../network/network.pm_.c:371
-msgid "Proxies configuration"
-msgstr "³]©w­n¨Ï¥Îªº¥N²z¦øªA¾¹"
-
-#: ../../network/network.pm_.c:372
-msgid "HTTP proxy"
-msgstr "HTTP ¥N²z¦øªA¾¹"
-
-#: ../../network/network.pm_.c:373
-msgid "FTP proxy"
-msgstr "FTP ¥N²z¦øªA¾¹"
-
-#: ../../network/network.pm_.c:374
-msgid "Track network card id (usefull for laptops)"
-msgstr "¬ö¿ýºô¸ô¥dªº ID (¹ï©óµ§°O«¬¹q¸£¬Û·í¦³¥Î)"
-
-#: ../../network/network.pm_.c:377
-msgid "Proxy should be http://..."
-msgstr "¥N²z¦øªA¾¹ªº³]©w®æ¦¡¥²¶·¬° http://..."
-
-#: ../../network/network.pm_.c:378
-msgid "Proxy should be ftp://..."
-msgstr "¥N²z¦øªA¾¹ªº³]©w®æ¦¡¥²¶·¬° ftp://..."
-
-#: ../../network/tools.pm_.c:38
-msgid "Internet configuration"
-msgstr "Internet ³]©w"
-
-#: ../../network/tools.pm_.c:39
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "±z·Q­n¸ÕµÛ³s½u¨ì Internet ¤W­±¶Ü?"
-
-#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
-msgid "Testing your connection..."
-msgstr "¥¿¦b´ú¸Õºô¸ô³s½u"
-
-#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
-msgid "The system is now connected to Internet."
-msgstr "¨t²Î¥Ø«e¤w¸g³s¤W Internet ¤F¡C"
-
-#: ../../network/tools.pm_.c:50
-msgid "For Security reason, it will be disconnected now."
-msgstr "¦]¬°¦w¥þ¦]¯À¦Ò¶q¡A²{¦b±N·|¤ÁÂ_³s½u¡C"
-
-#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"¨t²Î¥Ø«e¬Ý°_¨Ó¦ü¥G¨Ã¨S¦³³s¤W Internet¡C\n"
-"½Ð­«·s³]©w±zªº³s½u³]©w¡C"
-
-#: ../../network/tools.pm_.c:75
-msgid "Connection Configuration"
-msgstr "³s½u²ÕºA"
-
-#: ../../network/tools.pm_.c:76
-msgid "Please fill or check the field below"
-msgstr "½Ð±z¶ñ¤J¨Ã¥BÀˬd¤U­±Äæ¦ì¬ö¿ý"
-
-#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
-msgid "Card IRQ"
-msgstr "¤¶­±¥d IRQ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
-msgid "Card mem (DMA)"
-msgstr "¤¶­±¥d mem (DMA)"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
-msgid "Card IO"
-msgstr "¤¶­±¥d IO"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
-msgid "Card IO_0"
-msgstr "¤¶­±¥d IO_0"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
-msgid "Card IO_1"
-msgstr "¤¶­±¥d IO_1"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
-msgid "Your personal phone number"
-msgstr "±zªº­Ó¤H¹q¸Ü¸¹½X"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
-msgid "Provider name (ex provider.net)"
-msgstr "ISP ªº¦WºÙ (ºô¸ô´£¨ÑªÌ¦WºÙ)"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
-msgid "Provider phone number"
-msgstr "ISP ¹q¸Ü¸¹½X"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
-msgid "Provider dns 1 (optional)"
-msgstr "ISP ²Ä¤@¥x dns (¥i¤£¥Î¿é¤J)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
-msgid "Provider dns 2 (optional)"
-msgstr "ISP ²Ä¤G¥x dns (¥i¤£¥Î¿é¤J)"
-
-#: ../../network/tools.pm_.c:88
-msgid "Choose your country"
-msgstr "¿ï¾Ü±zªº°ê®a"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
-msgid "Dialing mode"
-msgstr "¼·±µªº¼Ò¦¡"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
-msgid "Connection speed"
-msgstr "³s½u³t«×"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
-msgid "Connection timeout (in sec)"
-msgstr "³s½u¹O®É (¥H¬í¬°³æ¦ì)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
-msgid "Account Login (user name)"
-msgstr "µn¤Jªº±b¸¹ (¨Ï¥ÎªÌ¦WºÙ)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
-msgid "Account Password"
-msgstr "±b¸¹ªº±K½X"
-
-#: ../../partition_table.pm_.c:622
-msgid "Extended partition not supported on this platform"
-msgstr "³o­Ó¥­¥x¨Ã¤£¤ä´©©µ¦ù¤À³Î°Ï"
-
-#: ../../partition_table.pm_.c:640
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"±zªºµwºÐ¤À³Îªí¤¤¦³µ{¦¡µLªk¨Ï¥ÎªºªÅ¥ÕºÏ°Ï¡A°ß¤@ªº¸Ñ¨M¤èªk¬O\n"
-"±N¥D¤À³Î°Ïªº¦ì¸m·h²¾¡AÅý³o¨ÇªÅ¥ÕºÏ°Ï»P©µ¦ù¤À³Î°Ï¬Û¾F¡C"
-
-#: ../../partition_table.pm_.c:744
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "¸Õ¹Ï±qÀÉ®× %s «ì´_®Éµo¥Í¿ù»~: %s"
-
-#: ../../partition_table.pm_.c:746
-msgid "Bad backup file"
-msgstr "¿ù»~ªº³Æ¥÷ÀÉ®×"
-
-#: ../../partition_table.pm_.c:768
-#, c-format
-msgid "Error writing to file %s"
-msgstr "¼g¤JÀÉ®× %s ®Éµo¥Í¿ù»~"
-
-#: ../../partition_table_raw.pm_.c:154
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"±zªºµwºÐµo¥Í¤F¤@­ÓÄY­«ªº¿ù»~¡C\n"
-"µwºÐŪ¨ú¼g¤JÀË´ú¥¢±Ñ¤F....\n"
-"³o·N¨ýµÛ±zªºµwºÐ¦³¹êÅ骺·´·l°ÝÃD¡A¥ô¦ó¸ê®Æªº¼g¤J¥i¯à³£·|µo¥Í¿ù»~¡C"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "¥²¶·ªº"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "­«­nªº"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "·¥¦nªº"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "¦n¥Îªº"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "¥i¥H¤@¸Õ"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:40
-msgid "Local printer"
-msgstr "¥»¾÷¦Lªí¾÷"
-
-#: ../../printer.pm_.c:41
-msgid "Remote printer"
-msgstr "»·ºÝ¦Lªí¾÷"
-
-#: ../../printer.pm_.c:42
-msgid "Printer on remote CUPS server"
-msgstr "»·ºÝªº CUPS ¦øªA¾¹¦Lªí¾÷"
-
-#: ../../printer.pm_.c:43
-msgid "Printer on remote lpd server"
-msgstr "»·ºÝªº lpd ¦øªA¾¹¦Lªí¾÷"
-
-#: ../../printer.pm_.c:44
-msgid "Network printer (socket)"
-msgstr "ºô¸ô¦Lªí¾÷ (socket)"
-
-#: ../../printer.pm_.c:45
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT ¦øªA¾¹¦Lªí¾÷"
-
-#: ../../printer.pm_.c:46
-msgid "Printer on NetWare server"
-msgstr "Netware ¦øªA¾¹¦Lªí¾÷"
-
-#: ../../printer.pm_.c:47
-msgid "Enter a printer device URI"
-msgstr "¿é¤J¦Lªí¾÷©Ò¦b URI ¦ì§}"
-
-#: ../../printer.pm_.c:48
-msgid "Pipe job into a command"
-msgstr "¨Ï¥Î Pipe ºÞ½u¤è¦¡²Õ¦¨¦C¦L¤u§@"
-
-#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
-#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
-msgid "Unknown model"
-msgstr "¥¼ª¾ªº«¬¸¹"
-
-#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:693
-#, c-format
-msgid "(on %s)"
-msgstr "(©ó %s)"
-
-#: ../../printer.pm_.c:695
-msgid "(on this machine)"
-msgstr "(©ó³o­Ó¾÷¾¹¤W)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "¿ï¾Ü¦Lªí¾÷³s½u"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "¦Lªí¾÷ªº³s½u¤è¦¡¬°¦ó?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure\n"
-"here; these printers will be automatically detected. Please\n"
-"select \"Printer on remote CUPS server\" in this case."
-msgstr ""
-"\n"
-"³o¸Ì±zÁÙ¨S¦³³]©w¦b»·ºÝªº CUPS ¦C¦L¦øªA¾¹¦Lªí¾÷¶µ¥Ø;³o¨Ç¦Lªí¾÷\n"
-"¶µ¥Ø±N·|¦Û°Ê°»´ú¥X¡C½Ð¿ï¾Ü \"»·ºÝªº CUPS ¦øªA¾¹¦Lªí¾÷\" ¶µ¥Ø¡C"
-
-#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
-#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
-msgid "None"
-msgstr "µL"
-
-#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
-msgid "Choose a default printer!"
-msgstr "½Ð¿ï¨ú¹w³]ªº¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:105
-msgid ""
-"With remote CUPS servers, you do not have to configure any \n"
-"printer here; CUPS servers inform your machine automatically\n"
-"about their printers. All printers known to your machine\n"
-"currently are listed in the \"Default printer\" field. Choose\n"
-"the default printer for your machine there and click the\n"
-"\"Apply/Re-read printers\" button. Click the same button to\n"
-"refresh the list (it can take up to 30 seconds after the start\n"
-"of CUPS until all remote printers are visible).\n"
-"When your CUPS server is in a different network, you have to \n"
-"give the CUPS server IP address and optionally the port number\n"
-"to get the printer information from the server, otherwise leave\n"
-"these fields blank."
-msgstr ""
-"·í¨Ï¥Î­ìºÝªº CUPS ¦C¦L¦øªA¾¹®É¡A±z¦b³oÃä¨Ã¤£»Ý­nÃB¥~¶i¦æ³]©wªº°Ê§@¡A\n"
-"¦]¬° CUPS ¦C¦L¦øªA¾¹·|¦Û°Ê´£¨Ñ¬ÛÃö¦Lªí¾÷³]©wÀô¹Ò¡C¥Ø«e±z¹q¸£©Ò¦³\n"
-"¤wª¾¥i¥Îªº¦Lªí¾÷³£¦C©ó \"¹w³]¦Lªí¾÷\" Äæ¦ì¸Ì­±¡C½Ð¿ï¾Ü±z¹q¸£©Ò­n\n"
-"¨Ï¥Îªº¹w³]¦Lªí¾÷¶µ¥Ø¡AµM«áÂI¿ï \"®M¥Î/­«Åª¦Lªí¾÷²M³æ\" «ö¶s¡CÂI¿ï\n"
-"¬Û¦Pªº«ö¶s¤]¯à°÷§ó·s²M³æ¤ºªº¶µ¥Ø¡C\n"
-"·í±z­n¨Ï¥Îªº CUPS ¦C¦L¦øªA¾¹­Y¬O¦b¤£¦Pªººô¸ô¤W¡A¨º±z´N»Ý­n«ü©w¸Ó¥x\n"
-"¦øªA¾¹¥D¾÷ IP (¥i¯à»Ý­n«ü©w Port)¡A¥H«K©ó¯à°÷¦s¨ú¦C¦L¦øªA¾¹ªº¸ê°T¡A\n"
-"­n¤£µM¸ÓÄæ¦ì¥i¥H¤£¥Î¿é¤J¡C"
-
-#: ../../printerdrake.pm_.c:117
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your\n"
-"network environment, so that you can access the printers on the\n"
-"CUPS servers in your local network. If this does not work \n"
-"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
-"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
-"CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"¤@¯ë¨Ó»¡¡ACUPS ¯à°÷«Ü¦Û°Êªº¨Ì¾Ú±zªººô¸ôÀô¹Ò¶i¦æ³]©wªº°Ê§@¡A¦]¦¹\n"
-"±z¥i¥H«Ü§Ö³t¤è«Kªº¨Ó¨Ï¥Î°Ï°ìºô¸ô¤ºªº CUPS ¦Lªí¾÷¦øªA¾¹¡C­Y¬O³o­Ó\n"
-"¶µ¥Ø¨Ã¨S¦³¥¿½T¤u§@¡A±z¥i¥H§â \"CPUS ¦Û°Ê¤Æ³]©w\" ªº¶µ¥ØÃö³¬¡A\n"
-"µM«á¤â°Ê½s¿è /etc/cups/cupsd.conf Àɮפº®e¡AµM«á¨Ï¥Î³o­Ó«ü©w­«·s\n"
-"±Ò°Ê CUPS ªA°È¥H«K©óÅýÅܧó¥Í®Ä¡C(©R¥O: \"service cups restart\")¡C"
-
-#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
-#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
-#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
-msgid "Close"
-msgstr "Ãö³¬"
-
-#: ../../printerdrake.pm_.c:125
-msgid "Apply/Re-read printers"
-msgstr "®M¥Î/­«Åª¦Lªí¾÷²M³æ"
-
-#: ../../printerdrake.pm_.c:129
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ¦ì§}¥²¶·­n¥ÎÃþ¦ü 1.2.3.4 ªº®æ¦¡¨Ó¿é¤J"
-
-#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
-msgid "The port number should be an integer!"
-msgstr "Port Äæ¦ìÀ³¸Ó¬°¼Æ¦r"
-
-#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
-msgid "Default printer"
-msgstr "¹w³]¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:146
-msgid "CUPS server IP"
-msgstr "CUPS ¦øªA¾¹ IP"
-
-#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
-msgid "Port"
-msgstr "°ð"
-
-#: ../../printerdrake.pm_.c:149
-msgid "Automatic CUPS configuration"
-msgstr "CPUS ¦Û°Ê¤Æ³]©w"
-
-#: ../../printerdrake.pm_.c:217
-msgid "Detecting devices ..."
-msgstr "¥¿¦b°»´ú¸Ë¸m ..."
-
-#: ../../printerdrake.pm_.c:217
-msgid "Test ports"
-msgstr "´ú¸Õ³s±µ°ð"
-
-#: ../../printerdrake.pm_.c:238
-#, c-format
-msgid "A printer, model \"%s\", has been detected on "
-msgstr "°»´ú¨ì«¬¸¹¬° \"%s\" ªº¦Lªí¾÷¡A¦ì¸m¦b"
-
-#: ../../printerdrake.pm_.c:255
-msgid "Local Printer Device"
-msgstr "¥»¾÷¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:256
-msgid ""
-"What device is your printer connected to \n"
-"(note that /dev/lp0 is equivalent to LPT1:)?\n"
-msgstr ""
-"±zªº¦Lªí¾÷³s±µªº¦ì¸m¬°¦ó ?\n"
-"(/dev/lp0 µ¥©ó Windows/DOS ¤Uªº LPT1:)\n"
-
-#: ../../printerdrake.pm_.c:258
-msgid "Printer Device"
-msgstr "¦Lªí¾÷¦ì¸m¡G"
-
-#: ../../printerdrake.pm_.c:261
-msgid "Device/file name missing!"
-msgstr "¸Ë¸m/ÀɮצWºÙ¿ò¥¢¿ù»~"
-
-#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
-#: ../../printerdrake.pm_.c:786
-msgid "Reading printer database ..."
-msgstr "¥¿¦bŪ¨ú¦Lªí¾÷¸ê®Æ ..."
-
-#: ../../printerdrake.pm_.c:312
-msgid "Remote lpd Printer Options"
-msgstr "»·ºÝ lpd ¦Lªí¾÷¿ï¶µ"
-
-#: ../../printerdrake.pm_.c:313
-msgid ""
-"To use a remote lpd printer, you need to supply\n"
-"the hostname of the printer server and the printer name\n"
-"on that server."
-msgstr ""
-"¦p­n¨Ï¥Î»·ºÝªº lpd ¦Lªí¾÷¡A±z¥²¶·­n«ü©w¥Î¨Ó´£¨Ñ\n"
-"¦LªíªA°Èªº»·ºÝ¦C¦L¦øªA¥D¾÷¦WºÙ¡A¥H¤Î¤À¨É¥X¨Ó\n"
-"ªº¦C¦L¦î¦C¦WºÙ¡C"
-
-#: ../../printerdrake.pm_.c:316
-msgid "Remote host name"
-msgstr "»·ºÝ¥D¾÷¦WºÙ"
-
-#: ../../printerdrake.pm_.c:317
-msgid "Remote printer name"
-msgstr "»·ºÝ¦Lªí¾÷¦WºÙ"
-
-#: ../../printerdrake.pm_.c:320
-msgid "Remote host name missing!"
-msgstr "¨S«ü©w»·ºÝ¥D¾÷¦WºÙ !"
-
-#: ../../printerdrake.pm_.c:324
-msgid "Remote printer name missing!"
-msgstr "¨S«ü©w¦Lªí¾÷¦WºÙ !"
-
-#: ../../printerdrake.pm_.c:392
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "ºô¸ôªÚ¾F (SMB, Windows 9x/NT) ¦Lªí¾÷¿ï¶µ"
-
-#: ../../printerdrake.pm_.c:393
-msgid ""
-"To print to a SMB printer, you need to provide the\n"
-"SMB host name (Note! It may be different from its\n"
-"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
-"well as the share name for the printer you wish to access and any\n"
-"applicable user name, password, and workgroup information."
-msgstr ""
-"¦p­n¨Ï¥Îºô¸ôªÚ¾F¦Lªí¾÷¡A±z¥²¶·­n´£¨Ñ¥D¾÷ºôªÚ¦WºÙ \n"
-"(ª`·N! ³o­Ó¦WºÙ»P TCP/IP ªº¥D¾÷¦WºÙ¥i¯à¨Ã¤£¬Û¦P)¡A\n"
-"¦³®ÉÁÙ¥²¶·«ü©w¦C¦L¦øªA¾¹ªº IP ¦ì§}¡B¤À¨É¥X¨Óªº¦Lªí\n"
-"¾÷¦WºÙ¡B¾A·íªº¨Ï¥ÎªÌ±b¸¹»P±K½X¡A¥H¤Î¤u§@¸s²Õªº¸ê°T¡C"
-
-#: ../../printerdrake.pm_.c:398
-msgid "SMB server host"
-msgstr "ºôªÚ¥D¾÷¦WºÙ¡¨"
-
-#: ../../printerdrake.pm_.c:399
-msgid "SMB server IP"
-msgstr "ºôªÚ¥D¾÷ IP"
-
-#: ../../printerdrake.pm_.c:400
-msgid "Share name"
-msgstr "¦Lªí¾÷¦WºÙ"
-
-#: ../../printerdrake.pm_.c:403
-msgid "Workgroup"
-msgstr "¤u§@¸s²Õ"
-
-#: ../../printerdrake.pm_.c:410
-msgid "Either the server name or the server's IP must be given!"
-msgstr "¦øªA¾¹ªº¥D¾÷¦WºÙ©ÎªÌ¬O IP ¥²¶·«ü©w"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Samba share name missing!"
-msgstr "Samba ¤À¨Éªº¦WºÙ¨S«ü©w !"
-
-#: ../../printerdrake.pm_.c:473
-msgid "NetWare Printer Options"
-msgstr "NetWare ¦Lªí¾÷¿ï¶µ"
-
-#: ../../printerdrake.pm_.c:474
-msgid ""
-"To print on a NetWare printer, you need to provide the\n"
-"NetWare print server name (Note! it may be different from its\n"
-"TCP/IP hostname!) as well as the print queue name for the printer you\n"
-"wish to access and any applicable user name and password."
-msgstr ""
-"¦p­n¨Ï¥Î NetWare ¦Lªí¾÷¡A±z¥²¶·­n´£¨Ñ NetWare ¦C¦L¦øªA¾¹ªº\n"
-"¥D¾÷¦WºÙ (ª`·N! ³o­Ó¦WºÙ»P TCP/IP ªº¥D¾÷¦WºÙ¥i¯à¨Ã¤£¬Û¦P)¡A\n"
-"ÁÙ­n¦³¤À¨É¥X¨Óªº¦C¦L¦î¦C¦WºÙ¡A¥H¤Î¾A·íªº¨Ï¥ÎªÌ±b¸¹»P±K½X¡C"
-
-#: ../../printerdrake.pm_.c:478
-msgid "Printer Server"
-msgstr "¦C¦L¦øªA¾¹¦WºÙ"
-
-#: ../../printerdrake.pm_.c:479
-msgid "Print Queue Name"
-msgstr "¦C¦L¦î¦C¦WºÙ"
-
-#: ../../printerdrake.pm_.c:484
-msgid "NCP server name missing!"
-msgstr "NCP ¦øªA¾¹¦WºÙ¨S«ü©w!"
-
-#: ../../printerdrake.pm_.c:488
-msgid "NCP queue name missing!"
-msgstr "NCP ¦C¦L¦î¦C¦WºÙ¦WºÙ¨S«ü©w"
-
-#: ../../printerdrake.pm_.c:527
-msgid "Socket Printer Options"
-msgstr "Socket ¦Lªí¾÷¿ï¶µ"
-
-#: ../../printerdrake.pm_.c:528
-msgid ""
-"To print to a socket printer, you need to provide the\n"
-"host name of the printer and optionally the port number.\n"
-"On HP JetDirect servers the port number is usually 9100,\n"
-"on other servers it can vary. See the manual of your\n"
-"hardware."
-msgstr ""
-"­n³z¹L socket ³oÃþ«¬ªº¦Lªí¾÷¶i¦æ¦C¦L¡A±z»Ý­n´£¨Ñ¸Ó¦Lªí¾÷\n"
-"ªº¥D¾÷¦WºÙ¡A¦P®É¤]¥i¯à»Ý­n¿ï¾Ü©Ê¿é¤J©Ò¦b Port ªº¦ì§}¡C\n"
-"¦b¤j³¡¤Àªº HP JetDirect ¦Lªí¾÷¦øªA¥D¾÷©Ò¨Ï¥Îªº Port ¦h¥b¬°\n"
-"9100¡A¨ä¾lÃþ«¬ªº¦Lªí¾÷´N¤£¤@©w¬°³o­Ó¼Æ­È¡C«Øij±z¥ý¾\Ū¦Lªí¾÷\n"
-"©Ò´£¨Ñªº¤â¥U¡A´M§ä¥X§A¥Ø«e¨Ï¥Î³o´Ú¦Lªí¾÷ªº¬ÛÃöµwÅé¸ê°T¡C"
-
-#: ../../printerdrake.pm_.c:533
-msgid "Printer host name"
-msgstr "¦Lªí¾÷¥D¾÷¦WºÙ"
-
-#: ../../printerdrake.pm_.c:537
-msgid "Printer host name missing!"
-msgstr "¨S«ü©w¦Lªí¾÷¥D¾÷¦WºÙ !"
-
-#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
-msgid "Printer Device URI"
-msgstr "¦Lªí¸Ë¸mªº URI"
-
-#: ../../printerdrake.pm_.c:567
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"±z¥i¥Hª½±µ¨Ï¥Î URI ªº¤è¦¡¦s¨ú¸Ó¦Lªí¾÷¡CURI ¥²¶·§¹¾ã¿é¤J CUPS ¦øªA¾¹©Ò¦b\n"
-"¦ì§}¡A©ÎªÌ¬O¥Î Foomatic ³W®æ¤è¦¡¿é¤J¤§¡C½Ðª`·N¡A¨Ã¤£¬O©Ò¦³ªº URI Ãþ«¬³£\n"
-"¯à°÷³Q©Ò¦³ªº spooler ¤ä´©¡C"
-
-#: ../../printerdrake.pm_.c:582
-msgid "A valid URI must be entered!"
-msgstr "¥²¶·¿é¤J§¹¾ãªº URI ¦ì§}"
-
-#: ../../printerdrake.pm_.c:682
-msgid ""
-"Every printer needs a name (for example lp).\n"
-"The Description and Location fields do not need \n"
-"to be filled in. They are comments for the users."
-msgstr ""
-"¨C¤@­Ó¦Lªí¾÷³£»Ý­n«ü©w¤@­Ó¦WºÙ (¤ñ¤è¹³¬O lp)¡C\n"
-"¦Ü©ó´y­z»P¦ì¸mÄæ¦ì¥i¥H¤£¥²¶ñ¤J¡A¦]¬°³o¨ÇÄæ¦ì¬Oµù¸Ñ¡C"
-
-#: ../../printerdrake.pm_.c:685
-msgid "Name of printer"
-msgstr "¦Lªí¾÷¦WºÙ"
-
-#: ../../printerdrake.pm_.c:686
-msgid "Description"
-msgstr "´y­z"
-
-#: ../../printerdrake.pm_.c:687
-msgid "Location"
-msgstr "¦ì¸m"
-
-#: ../../printerdrake.pm_.c:701
-msgid "Preparing printer database ..."
-msgstr "¥¿¦b·Ç³Æ¦Lªí¾÷¸ê®Æ"
-
-#: ../../printerdrake.pm_.c:793
-msgid "Printer model selection"
-msgstr "¦Lªí¾÷«¬¸¹¿ï¾Ü"
-
-#: ../../printerdrake.pm_.c:794
-msgid "Which printer model do you have?"
-msgstr "±zªº¦Lªí¾÷Äݩ󨺺ث¬¸¹¡H"
-
-#: ../../printerdrake.pm_.c:866
-msgid "OKI winprinter configuration"
-msgstr "OKI Windows ¦Lªí¾÷³]©w"
-
-#: ../../printerdrake.pm_.c:867
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they\n"
-"work only when connected to the first parallel port. When\n"
-"your printer is connected to another port or to a print\n"
-"server box please connect the printer to the first parallel\n"
-"port before you print a test page. Otherwise the printer\n"
-"will not work. Your connection type setting will be ignored\n"
-"by the driver."
-msgstr ""
-"±z¥Ø«e¬O³]©w¨Ï¥Î OKI ¹p®g¦Lªí¾÷¶µ¥Ø¡C³oÃþªº¦Lªí¾÷¨Ï¥Î¤@ºØ«Ü\n"
-"¯S®íªº¶Ç¿é·¾³q¨ó©w¡A¦]¦¹³oÃþ¦Lªí¾÷¤@©w­n¦w¸Ë¦b¹q¸£²Ä¤@­Ó³sµ²°ð\n"
-"¦ì¸m¤W¤~¯à°÷¥¿±`¤u§@¡C©Ò¥H²{¦b½Ð±z¥ý½T©w±z¥Ø«eªº¦Lªí¾÷¤w¸g¥¿½T\n"
-"¦a¦w¸m¦b²Ä¤@­Ó³sµ²°ð¤W¡A¥H«K©ó¤~¯à°÷¥¿¦b¦C¦L´ú¸Õ­¶¤º®e¡C§_«h\n"
-"¦C¦L¥\¯à±N·|µLªk¥¿±`¤u§@¡C"
-
-#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark ¼Q¾¥¦Lªí¾÷³]©w"
-
-#: ../../printerdrake.pm_.c:917
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support\n"
-"local printers, no printers on remote machines or print server\n"
-"boxes. Please connect your printer to a local port or\n"
-"configure it on the machine where it is connected to."
-msgstr ""
-"Lexmark ©Ò´£¨Ñªº¼Q¾¥¦Lªí¾÷ÅX°Êµ{¦¡¥u¦³¤ä´©¥»¾÷¦Lªí¾÷ªº¦C¦L\n"
-"ªº¥\¯à¡A±NµLªk¨Ï¥Î³oÃþ»·ºÝ¦Lªí¾÷¡C½Ð½T»{±z¥Ø«e¦Lªí¾÷¤w¸g\n"
-"¥¿½T³sµ²¨ì±z¥»¦aºÝ¹q¸£¤W¡A³]©w¸Ó¦Lªí¾÷ªº³sµ²¦ì¸m¡C"
-
-#: ../../printerdrake.pm_.c:947
-msgid ""
-"To be able to print with your Lexmark inkjet and this\n"
-"configuration, you need the inkjet printer drivers\n"
-"provided by Lexmark (http://www.lexmark.com/). Go to\n"
-"the US site and click on the \"Drivers\" button. Then\n"
-"choose your model and afterwards \"Linux\" as\n"
-"operating system. The drivers come as RPM packages\n"
-"or shell scripts with interactive graphical installation.\n"
-"You do not need to do this configuration by the\n"
-"graphical frontends. Cancel directly after the license\n"
-"agreement. Then print printhead alignment pages with\n"
-"\"lexmarkmaintain\" and adjust the head alignment\n"
-"settings with this program."
-msgstr ""
-"­Y¬O§Æ±æ¯à°÷¨Ï¥Î³o¥x Lexmark ¼Q¾¥¦Lªí¾÷¶i¦æ¦C¦Lªº¸Ü\n"
-"±z»Ý­n¥Ñ Lexmark ºô¯¸ (http://www.lexmark.com) ­º­¶¤W\n"
-"´M§ä¬ÛÃö³sµ²¡A¤U¸ü³o¥x¦Lªí¾÷ªºÅX°Êµ{¦¡¡C¤ñ¤è·í±z³s¤W\n"
-"Lexmark ºô¯¸­º­¶«á¡A½ÐÂI¿ï \"Drivers\" «ö¶s¡A¿ï¾Ü±z\n"
-"¥Ø«e¨Ï¥Î¸Ó´Ú¦Lªí¾÷«¬¸¹¡A¨Ã½T»{¬O¿ï¨ú¨Ï¥Î \"Linux\"ªº\n"
-"ª©¥»¡C¤@¯ë¨Ó»¡¡A±z¤U¸ü¦^¨ÓªºÀɮסA¥i¯à¬O RPM ®M¥óÀÉ®×\n"
-"©ÎªÌ¬O´X­Ó shell script (°õ¦æ¸ÓÀÉ®×±N·|±Ò°Ê¦w¸Ëµ{¦¡)¡C\n"
-"¤@¯ë¨Ó»¡¡A±z¨Ã¤£»Ý­n³z¹L¹Ï¦æ¤Æªº«eºÝ¤¶­±¨Ó¶i¦æ¬ÛÃöªº\n"
-"ªº³]©w¡CµM«á¨Ï¥Î \"lexmarkmaintain\" µ{¦¡¶µ¥Ø¨Ó¦C¦L¼QÀY\n"
-"®Õ¥¿ªº¤u§@³]©w¡C"
-
-#: ../../printerdrake.pm_.c:1079
-msgid ""
-"Printer default settings\n"
-"You should make sure that the page size and the\n"
-"ink type (if available) are set correctly. Note\n"
-"that with a very high printout quality printing\n"
-"can get substantially slower."
-msgstr ""
-"¹w³]¦Lªí¾÷³]©w\n"
-"±z»Ý­n½T©w¯È±iªº¤j¤p»P¾¥¤ôªººØÃþ³]©w³£¥¿½TµL»~¡C\n"
-"½Ðª`·N¤@¤U¡A·í¨Ï¥Î°ª«~½è¦C¦L®É©Òªá¶Oªº®É¶¡·|¶V¤[¡C"
-
-#: ../../printerdrake.pm_.c:1090
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "%s °Ñ¼Æ»Ý­n¬°¾ã¼Æ !"
-
-#: ../../printerdrake.pm_.c:1094
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "%s °Ñ¼Æ»Ý­n¬°¾ã¼Æ"
-
-#: ../../printerdrake.pm_.c:1099
-#, c-format
-msgid "Option %s out of range!"
-msgstr "%s °Ñ¼Æ¶W¥X¤¹³\½d³ò"
-
-#: ../../printerdrake.pm_.c:1136
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "±z­n¨Ï¥Î³o¥x¦Lªí¾÷ (\"%s\") ¬°¹w³]¦Lªí¾÷¶Ü¡H"
-
-#: ../../printerdrake.pm_.c:1152
-msgid "Test pages"
-msgstr "¦C¦L´ú¸Õ­¶"
-
-#: ../../printerdrake.pm_.c:1153
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed\n"
-"and on laser printers with too low memory it can even not come out.\n"
-"In most cases it is enough to print the standard test page."
-msgstr ""
-"±z¿ï¨ú§A­n¦C¦Lªº´ú¸Õ­¶¡Cª`·N: ¹Ï§Î´ú¸Õ­¶·|ªá¶O¤ñ¸û¤[ªº®É¶¡¨Ó¦C¦L¡A\n"
-"­Y¬O¸Ó¦Lªí¾÷µwÅé¥i¥Î°O¾ÐÅé«Ü¤Öªº¸Ü¡A¦C¦L®É¶¡¯à°÷·|»Ý­nªá¶O§ó¤[®É¶¡¡C\n"
-"¤@¯ë±¡ªp¨Ó»¡¡A¿ï¾Ü¼Ð·Çªº´ú¸Õ­¶´N«Ü¨¬°÷¤F¡C"
-
-#: ../../printerdrake.pm_.c:1158
-msgid "No test pages"
-msgstr "¤£¦C¦L´ú¸Õ­¶"
-
-#: ../../printerdrake.pm_.c:1159
-msgid "Print"
-msgstr "¦C¦L"
-
-#: ../../printerdrake.pm_.c:1161
-msgid "Standard test page"
-msgstr "¼Ð·Ç´ú¸Õ­¶"
-
-#: ../../printerdrake.pm_.c:1164
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1167
-msgid "Alternative test page (A4)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1169
-msgid "Photo test page"
-msgstr "¹Ï§Î´ú¸Õ­¶"
-
-#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
-msgid "Printing test page(s)..."
-msgstr "¥¿¦b¦C¦L´ú¸Õ­¶..."
-
-#: ../../printerdrake.pm_.c:1200
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"´ú¸Õ­¶¤w¸g³Q°e¨ì¦C¦L¦øªAµ{¦¡¤F¡A±µµÛ¥i¯à»Ý­nªá\n"
-"¤@ÂI®É¶¡¡A¦Lªí¾÷¤~·|§âµ²ªG¦L¥X¨Ó¡C\n"
-"¥Ø«eªº¦C¦Lª¬ºA:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1204
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"´ú¸Õ­¶¤w¸g³Q°e¨ì¦C¦L¦øªAµ{¦¡¤F¡A±µµÛ¥i¯à»Ý­nªá\n"
-"¤@ÂI®É¶¡¡A¦Lªí¾÷¤~·|§âµ²ªG¦L¥X¨Ó¡C\n"
-
-#: ../../printerdrake.pm_.c:1211
-msgid "Did it work properly?"
-msgstr "¦C¦L¥¿±`¶Ü¡H"
-
-#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
-msgid "Raw printer"
-msgstr "Raw ¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:1237
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"­n¦b²×ºÝ¾÷©R¥O¦CÀô¹Ò¦C¦LÀɮתº¸Ü¡A±z¥i¥H°õ¦æ³o­Ó«ü¥O: \"%s <ÀÉ®×>\" ©ÎªÌ¬O ¨Ï"
-"¥Î¹Ï«¬¤¶­±µ{¦¡: \"xpp <ÀÉ®×>\" ©ÎªÌ¬O \"qtcups <ÀÉ®×>\" §Y¥i¡C\n"
-"±z¥i¥H³z¹L¹Ï«¬¤¶­±µ{¦¡Â²³æªº¿ï¾Ü¦Lªí¾÷¶µ¥Ø¡A¥]§t­×§ï¬ÛÃöªº¦C¦L¿ï¶µ¡C\n"
-
-#: ../../printerdrake.pm_.c:1239
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"³o­Ó«ü¥O¥\¯à¡A¨ä¹ê±z¤]¥i¥H¦b³\¦hÀ³¥Îµ{¦¡¦C¦L¹ï¸Ü¤è¶ôªº \"¦C¦L©R¥O\" ¨Ï¥Î"
-"¥¦¡C\n"
-"¦ý¬O³oÃ䤣´£¨Ñ©Ò¿×ªºÀɮצWºÙ¡A¦]¬°¬ÛÃöÀɮתº¦C¦L¥\¯à¬O¥Ñ¬ÛÃöÀ³¥Îµ{¦¡´£¨Ñ¡C\n"
-
-#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
-#: ../../printerdrake.pm_.c:1266
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"\"%s\" «ü¥O¡A¯à°÷Åý±z­×§ï¬Y­Ó³]©w¦C¦L¤u§@¶µ¥Øªº°Ñ¼Æ³]©w¡C\n"
-"²³æ¤@ÂIªº¤è¦¡´N¬O¦b©R¥O¦C¥[¤W±z­n¶ñ¤Jªº³]©w­È¡A¤ñ¤è \"%s <ÀÉ®×>\"¡C "
-
-#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
-msgid ""
-"To get a list of the options available for the current printer read either "
-"the list shown below or click on the \"Print option list\" button.\n"
-"\n"
-msgstr ""
-"¬d¬Ý¤U­±²M³æ©ÒÅã¥Üªº¶µ¥Ø¡A©ÎªÌ¬OÂI¿ï \"¦C¦L¿ï¶µ²M³æ\" «ö¶s¡A\n"
-"¥H«K©ó¯à°÷Àò±o¥Ø«e³o¥x¦Lªí¾÷¥i¥Îªº¬ÛÃö°Ñ¼Æ¿ï¶µ¡C\n"
-
-#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"­n¦b²×ºÝ¾÷©R¥O¦CÀô¹Ò¦C¦LÀɮתº¸Ü¡A±z¥i¥H°õ¦æ³o­Ó«ü¥O: \"%s <ÀÉ®×>\"¡C\n"
-
-#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
-#: ../../printerdrake.pm_.c:1275
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"³o­Ó«ü¥O¥\¯à¡A¨ä¹ê±z¤]¥i¥H¦b³\¦hÀ³¥Îµ{¦¡¦C¦L¹ï¸Ü¤è¶ôªº \"¦C¦L©R¥O\" ¨Ï¥Î"
-"¥¦¡C\n"
-"¦ý¬O³oÃ䤣´£¨Ñ©Ò¿×ªºÀɮצWºÙ¡A¦]¬°¬ÛÃöÀɮתº¦C¦L¥\¯à¬O¥Ñ¬ÛÃöÀ³¥Îµ{¦¡´£¨Ñ¡C\n"
-
-#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button.\n"
-"\n"
-msgstr ""
-"ÂI¿ï \"¦C¦L¿ï¶µ²M³æ\" «ö¶s¡A¥H«K©ó¯à°÷Àò±o¥Ø«e³o¥x¦Lªí¾÷¥i¥Îªº¬ÛÃö°Ñ¼Æ¿ï"
-"¶µ¡C\n"
-
-#: ../../printerdrake.pm_.c:1273
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"­n¦b²×ºÝ¾÷©R¥O¦CÀô¹Ò¦C¦LÀɮתº¸Ü¡A±z¥i¥H°õ¦æ³o­Ó«ü¥O: \"%s <ÀÉ®×>\" ©ÎªÌ¬O "
-"\"%s <ÀÉ®×>\"¡C\n"
-
-#: ../../printerdrake.pm_.c:1277
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"±z¤]¥i¥H¨Ï¥Î¹Ï§Î¤¶­±ºÞ²zµ{¦¡ - \"xpdq\" ¨Ó³]©w°Ñ¼Æ³]©w¡A¥]§t­n¦C¦Lªº¤u§@¶µ"
-"¥Ø¡C\n"
-"¦pªG±z¥Ø«e¬O¨Ï¥Î KDE ®à­±Àô¹Òªº¸Ü¡A¦b®à­±ªº¤u§@¦C¤W¡A±zÀ³¸Ó¥i¥H§ä¨ì¤@­Ó©R¦W"
-"¬° \"°±¤î¦Lªí¾÷!\" ªº¶µ¥Ø¡C·í±zÂI¿ï¸Ó¶µ¥Ø«á¡A¥Ø«e¥¿¦b¦C¦Lªº¤u§@³£·|¥ß§Y¼È"
-"°±¡C\n"
-
-#: ../../printerdrake.pm_.c:1281
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"\"%s\" »P \"%s\" «ü¥O¡A¯à°÷Åý±z­×§ï¬Y­Ó³]©w¦C¦L¤u§@¶µ¥Øªº°Ñ¼Æ³]©w¡C\n"
-"²³æ¤@ÂIªº¤è¦¡´N¬O¦b©R¥O¦C¥[¤W±z­n¶ñ¤Jªº³]©w­È¡A¤ñ¤è \"%s <ÀÉ®×>\"¡C\n"
-
-#: ../../printerdrake.pm_.c:1292
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "¨Ï¥Î \"%s\" ¦Lªí¾÷¶i¦æ¦C¦L"
-
-#: ../../printerdrake.pm_.c:1294
-msgid "Print option list"
-msgstr "¦C¦L¿ï¶µ²M³æ"
-
-#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
-#: ../../standalone/printerdrake_.c:48
-msgid "Reading printer data ..."
-msgstr "Ū¨ú¦Lªí¾÷¸ê®Æ"
-
-#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
-#: ../../printerdrake.pm_.c:1411
-msgid "Transfer printer configuration"
-msgstr "¦Lªí¾÷¶Ç°e³]©w"
-
-#: ../../printerdrake.pm_.c:1339
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done \n"
-"for the spooler %s to %s, your current spooler. All the\n"
-"configuration data (printer name, description, location, \n"
-"connection type, and default option settings) is overtaken,\n"
-"but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following \n"
-"reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1347
-msgid ""
-"CUPS does not support printers on Novell servers or printers\n"
-"sending the data into a free-formed command.\n"
-msgstr "CUPS ¥Ø«e¨Ã¤£¤ä´©¦ì©ó Novell ¥D¾÷¤Wªº¦Lªí¾÷¡C\n"
-
-#: ../../printerdrake.pm_.c:1350
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and\n"
-"Socket/TCP printers.\n"
-msgstr ""
-"PDQ ¶È¤ä´©¥»¦aºÝ¦Lªí¾÷¡A©ÎªÌ¬O»·ºÝ°õ¦æ LPD ªº¦Lªí¾÷¡A¥H¤Î\n"
-"Socket/TCP ¦Lªí¾÷Ãþ«¬¡C\n"
-
-#: ../../printerdrake.pm_.c:1353
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "PD »P LPRng ¤£¤ä´© IPP Ãþ«¬ªº¦Lªí¾÷¡C\n"
-
-#: ../../printerdrake.pm_.c:1355
-msgid ""
-"In addition, queues not created with this program or\n"
-"\"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1357
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by\n"
-"their manufacturers or with native CUPS drivers can not be\n"
-"transferred."
-msgstr ""
-"\n"
-"¦Lªí¾÷À³¸Ó¤w¸g³z¹L¼t°Ó©Ò´£¨Ñªº PPD Àɮפº®e³]©w¦n¤F¡C©ÎªÌ¬O\n"
-"­ì¥Í©Êªº CUPS ÅX°Êµ{¦¡µLªk³Q¶i¦æÂà´«°Ê§@¡C"
-
-#: ../../printerdrake.pm_.c:1360
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"½ÐÂI¿ï¼Ð°O±z­n¶Ç°eªº¦Lªí¾÷¶µ¥Ø¡A¡DµM«áÂI¿ï \"¶Ç°e\" §Y¥i¡C"
-
-#: ../../printerdrake.pm_.c:1363
-msgid "Do not transfer printers"
-msgstr "¤£­n¶Ç°e¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
-msgid "Transfer"
-msgstr "¶Ç°e"
-
-#: ../../printerdrake.pm_.c:1377
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"¦b %s ¤w¸g¦s¦b¤F¤@­Ó¦WºÙ¬° %s ªº¦Lªí¾÷¦WºÙ¡C\n"
-"½ÐÂI¿ï \"¶Ç°e\" Âл\¤º®e¡C\n"
-"±z¤]¥i¥H¥t¥~¿é¤J¤@­Ó¦WºÙ¡A©ÎªÌ¬O²¤¹L³o¥x¦Lªí¾÷¡C"
-
-#: ../../printerdrake.pm_.c:1385
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "¦Lªí¾÷ªº¦WºÙÀ³¸Ó¥u¦³¥]§t­^¤å¦r¥À¡B¼Æ¦r»P©³½u³oÃþ¦r¤¸"
-
-#: ../../printerdrake.pm_.c:1390
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"³o¥x \"%s\" ¦Lªí¾÷¤w¸g¦s¦b¤F¡A\n"
-"±z½T©w­nÂл\³o¥x¦Lªí¾÷ªº²ÕºA³]©w¶Ü¡H"
-
-#: ../../printerdrake.pm_.c:1398
-msgid "New printer name"
-msgstr "·s¦Lªí¾÷¦WºÙ"
-
-#: ../../printerdrake.pm_.c:1401
-#, c-format
-msgid "Transferring %s ..."
-msgstr "¥¿¦b¶Ç°e %s ..."
-
-#: ../../printerdrake.pm_.c:1412
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"),\n"
-"Should it be also the default printer under the\n"
-"new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1423
-msgid "Refreshing printer data ..."
-msgstr "¥¿¦b§ó·s¦Lªí¾÷¸ê®Æ ..."
-
-#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
-#: ../../printerdrake.pm_.c:1515
-msgid "Configuration of a remote printer"
-msgstr "³]©w»·ºÝ¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:1432
-msgid "Starting network ..."
-msgstr "±Ò°Êºô¸ô¤¤ ..."
-
-#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
-#: ../../printerdrake.pm_.c:1464
-msgid "Configure the network now"
-msgstr "¥ß§Y³]©wºô¸ô"
-
-#: ../../printerdrake.pm_.c:1455
-msgid "Network functionality not configured"
-msgstr "¥Ø«eºô¸ô¥\¯à©|¥¼³]©w"
-
-#: ../../printerdrake.pm_.c:1456
-msgid ""
-"You are going to configure a remote printer. This needs working\n"
-"network access, but your network is not configured yet. If you\n"
-"go on without network configuration, you will not be able to use\n"
-"the printer which you are configuring now. How do you want \n"
-"to proceed?"
-msgstr ""
-"±z¥Ø«e­n¶}©l³]©w»·ºÝ¦Lªí¾÷¦C¦Lªº¶µ¥Ø¡C­n¶i¦æ¦¹¶µ¥Ø³]©wªº«e´£¡A\n"
-"±zªº¨t²Î»Ý­n¨ã³Æºô¸ô¥\¯à¥H«K©ó¶i¦æ¦s¨ú°Ê§@¡A¦ý¬O¥Ø«eºô¸ô©|¥¼\n"
-"³]©w¡C¦pªG±z¥´ºâ²¤¹Lºô¸ô³]©w¶µ¥ØÄ~Äò¶i¦æ¤U­±ªº¨BÆJªº¸Ü¡AÃö©ó\n"
-"³]©w¨Ï¥Î»·ºÝ¦Lªí¾÷¥\¯àªº¶µ¥Ø±NµLªk³]©w¡C±z¥´ºâ­n«ç»ò§@©O¡H"
-
-#: ../../printerdrake.pm_.c:1463
-msgid "Go on without configuring the network"
-msgstr "²¤¹Lºô¸ô³]©w¶µ¥ØÄ~Äò¶i¦æ¤U­±ªº¨BÆJ"
-
-#: ../../printerdrake.pm_.c:1496
-msgid ""
-"The network configuration done during the installation \n"
-"cannot be started now. Please check whether the network\n"
-"gets accessable after booting your system and correct the\n"
-"configuration using the Mandrake Control Center, section\n"
-"\"Network & Internet\"/\"Connection\", and afterwards set\n"
-"up the printer, also using the Mandrake Control Center,\n"
-"section \"Hardware\"/\"Printer\""
-msgstr ""
-"¦b¨t²Î¾ã­Ó¦w¸Ë¹Lµ{¤¤¡A¨t²Îªººô¸ôªA°È¨Ã¥¼±Ò°Ê¡C«Øij±z¥i¥H¦b\n"
-"¾ã­Ó¦w¸Ë§¹¦¨¡A­«·s¶}¾÷¶i¤J¨t²Î«á¡A³z¹L Mandrake ±±¨î¥xµ{¦¡\n"
-"¿ï¾Ü \"ºô¸ô & Internet\"/\"³s½u\" ¶µ¥Ø¶i¦æ³]©w¡C¦¹¥~¡A«áÄò\n"
-"¹³¬O¦Lªí¾÷ªº³]©w¡A±z¤]¥i¥H³z¹L Mandrake ±±¨î¥xµ{¦¡¡A¦b\n"
-"\"µwÅé\"/\"¦Lªí¾÷\" ¶µ¥Ø¨Ó¶i¦æ³]©w"
-
-#: ../../printerdrake.pm_.c:1503
-msgid ""
-"The network access was not running and could not be \n"
-"started. Please check your configuration and your \n"
-"hardware. Then try to configure your remote printer\n"
-"again."
-msgstr ""
-"ºô¸ôªA°Èªº¦s¨ú¥\¯à¨Ã¥¼¶}±Ò¡A¦Ó¥B¤]µLªk±Ò°Ê³o­ÓªA°È¶µ¥Ø¡C\n"
-"½ÐÀˬd¤@¤U±zªº³]©w¡A¬Æ¦Ü¥]§t±zªºµwÅé¬O§_³]©w¥¿½TµL»~¡C\n"
-"·íÀˬd§¹²¦«á¡A¦A­«·s³]©w»·ºÝ¦C¦Lªº¬ÛÃö¶µ¥Ø¡C"
-
-#: ../../printerdrake.pm_.c:1516
-msgid "Restarting printing system ..."
-msgstr "¥¿¦b­«·s±Ò°Ê¦C¦L¨t²ÎªA°È ..."
-
-#: ../../printerdrake.pm_.c:1548
-msgid "high"
-msgstr "°ª"
-
-#: ../../printerdrake.pm_.c:1548
-msgid "paranoid"
-msgstr "ºÆ¨gª¬ºA"
-
-#: ../../printerdrake.pm_.c:1549
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "¦b %s ¦w¥þµ¥¯ÅÀô¹Ò¤U¥¿¦b¦w¸Ë¦C¦LªA°È¨t²Î¶µ¥Ø"
-
-#: ../../printerdrake.pm_.c:1550
-#, c-format
-msgid ""
-"You are about to install the printing system %s on\n"
-"a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process)\n"
-"which waits for print jobs and handles them. This daemon\n"
-"is also accessable by remote machines through the network\n"
-"and so it is a possible point for attacks. Therefore only\n"
-"a few selected daemons are started by default in this\n"
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this\n"
-"machine?"
-msgstr ""
-"±z¥Ø«e¥¿·Ç³Æ¦b %s ¦w¥þµ¥¯ÅªºÀô¹Ò¦w¸Ë¨Ó¦w¸Ë %s ³o­Ó\n"
-"¦C¦L¨t²Î¶µ¥Ø¡C\n"
-"\n"
-"³o­Ó¦C¦LªA°È¶µ¥Ø¡A¬ÛÃöµ{¦¡±N·|¦b¹õ«á¹B§@¡A¥H«K©ó¯à°÷\n"
-"´£¨Ñ¬ÛÃö¦Lªí¥\¯à¡C¦¹¥~¡A¦C¦L¬ÛÃöªºªA°È¡A¤]¯à°÷¸g¥Ñºô¸ô\n"
-"ªº¤è¦¡¶i¦æ¦s¨ú¡A©Ò¥H¬Y­Ó¼h­±¨Ó»¡³o¥i¯à¦³³Q§ðÀ»ªº¦MÀI¡C\n"
-"¦]¦¹¡A¦b³o­Ó¦w¥þµ¥¯ÅÀô¹Ò¤U¡A±N¥u¦³¤Ö³¡¥÷ªºªA°Èµ{¦¡¹w³]\n"
-"·|¦b¶}¾÷®É±Ò°Ê¡C\n"
-"\n"
-"±z½T©w­n¶}©l³]©w³o¥x¾÷¾¹¤Wªº¦C¦L¶µ¥Ø³]©w¶Ü¡H"
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Starting the printing system at boot time"
-msgstr "©ó¶}¾÷®É±Ò°Ê¦C¦LªA°È¨t²Î"
-
-#: ../../printerdrake.pm_.c:1585
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically\n"
-"when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off \n"
-"by changing to a higher security level, because the printing\n"
-"system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing\n"
-"system turned on again?"
-msgstr ""
-"¦C¦LªA°È¨t²Î (%s) ±N¤£·|¦b¨t²Î¶}¾÷®É¸ü¤J¡C\n"
-"\n"
-"­Y¬O±z¨t²Î³]©w¬O¿ï¾Ü¤ñ¸û°ªªº¦w¥þµ¥¯Å¶µ¥Øªº¸Ü¡A¹w³]¤]¬O¤£·|\n"
-"±Ò°Ê¦C¦LªA°Èªº¶µ¥Øªº¡C\n"
-"\n"
-"±z§Æ±æ³oÃä¯à°÷³]©w¦b¶}¾÷®É¯à°÷¹w³]±Ò°Ê¦C¦LªA°Èªº¶µ¥Ø¶Ü¡H"
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
-#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
-#: ../../printerdrake.pm_.c:1778
-msgid "Checking installed software..."
-msgstr "¥¿¦bÀˬd¤w¸g¦w¸Ëªº³nÅé"
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Removing LPRng..."
-msgstr "¥¿¦b²¾°£ LPRng..."
-
-#: ../../printerdrake.pm_.c:1675
-msgid "Removing LPD..."
-msgstr "¥¿¦b²¾°£ LPD..."
-
-#: ../../printerdrake.pm_.c:1727
-msgid "Select Printer Spooler"
-msgstr "¿ï¾Ü¦Lªí¦C¦L¨t²Î"
-
-#: ../../printerdrake.pm_.c:1728
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "±z¥´ºâ¥Î¨º¤@®M¦C¦L¨t²Î¡H"
-
-#: ../../printerdrake.pm_.c:1759
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "¥¿¦b³]©w \"%s\" ¦Lªí¾÷¤¤ ..."
-
-#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
-#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
-msgid "Printer options"
-msgstr "¦Lªí¾÷¿ï¶µ"
-
-#: ../../printerdrake.pm_.c:1815
-msgid "Preparing PrinterDrake ..."
-msgstr "¥¿¦b·Ç³Æ PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:1845
-msgid "Would you like to configure printing?"
-msgstr "±z­n³]©w¦Lªí¾÷¦C¦L¶µ¥Ø¶Ü¡H"
-
-#: ../../printerdrake.pm_.c:1857
-msgid "Printing system: "
-msgstr "¦C¦L¨t²Î:"
-
-#: ../../printerdrake.pm_.c:1879
-msgid ""
-"The following printers are configured.\n"
-"Click on one of them to modify it or\n"
-"to get information about it or on \n"
-"\"Add Printer\" to add a new printer."
-msgstr ""
-"¤U¦Cªº¦Lªí¾÷³£¤w¸g³]©w¹L¤F¡A±z¥i¥HÂI¿ï\n"
-"¨ä¤¤¤@­Ó¶µ¥Ø¡A¥i¥H¬d¬Ý¤º®e¸ê°T©ÎªÌ¬O\n"
-"­×§ï¤º®e³]©w¡C­Y¬O­n·s¼W¤@¥x¦Lªí¾÷¡A\n"
-"½ÐÂI¿ï \"·s¼W¦Lªí¾÷\" «ö¶s¶i¦æ³]©w¡C"
-
-#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
-msgid "Normal Mode"
-msgstr "¤@¯ë¼Ò¦¡"
-
-#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
-msgid " (Default)"
-msgstr " (¹w³]¶}¾÷)"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
-msgid "Printer(s) on remote CUPS server(s)"
-msgstr "»·ºÝªº CUPS ¦øªA¾¹¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
-msgid "Printer(s) on remote server(s)"
-msgstr "»·ºÝªº¦øªA¾¹¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
-#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
-msgid "Add printer"
-msgstr "·s¼W¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
-#: ../../printerdrake.pm_.c:2128
-msgid "Do you want to configure another printer?"
-msgstr "±zÁٻݭn³]©w¥t¥~¤@¥x¦Lªí¾÷¶Ü¡H"
-
-#: ../../printerdrake.pm_.c:2003
-msgid "Modify printer configuration"
-msgstr "­×§ï¦Lªí¾÷³]©w"
-
-#: ../../printerdrake.pm_.c:2004
-#, c-format
-msgid ""
-"Printer %s: %s %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"¦Lªí¾÷ %s: %s %s\n"
-"±z­n­×§ï³o­Ó¦Lªí¾÷ªº¨º­Ó¶µ¥Ø¡H"
-
-#: ../../printerdrake.pm_.c:2012
-msgid "Do it!"
-msgstr "°µ§a !"
-
-#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
-msgid "Printer connection type"
-msgstr "¦Lªí¾÷³s½u¤è¦¡"
-
-#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
-msgid "Printer name, description, location"
-msgstr "¦Lªí¾÷¦WºÙ,´y­z,¦ì¸m"
-
-#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
-msgid "Printer manufacturer, model, driver"
-msgstr "¦Lªí¾÷¼t°Ó,«¬¸¹,ÅX°Êµ{¦¡"
-
-#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
-msgid "Printer manufacturer, model"
-msgstr "¦Lªí¾÷¼t°Ó,«¬¸¹"
-
-#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
-msgid "Set this printer as the default"
-msgstr "¨Ï¥Î³o¥x¦Lªí¾÷¬°¹w³]¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
-msgid "Print test pages"
-msgstr "¦C¦L´ú¸Õ­¶..."
-
-#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
-msgid "Know how to print with this printer"
-msgstr "ÁA¸Ñ¦p¦ó¨Ï¥Î³o¥x¦Lªí¾÷¶i¦æ¦C¦L"
-
-#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
-msgid "Remove printer"
-msgstr "§R°£¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:2071
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "¥¿¦b§R°£Â¦³¦Lªí¾÷ \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2096
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "³o¥x¦Lªí¾÷ \"%s\" ±N·|³Q³]©w¦¨¬°¹w³]¦Lªí¾÷¡C"
-
-#: ../../printerdrake.pm_.c:2103
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "±z½T©w­n§R°£ \"%s\" ¦Lªí¾÷¶Ü¡H"
-
-#: ../../printerdrake.pm_.c:2105
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "²¾°£¦Lªí¾÷ \"%s\" ¤¤ ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy ¥N²z³]©w"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Åwªï¨Ó¨ì proxy ¥N²z³]©w¤u¨ã¡C\n"
-"\n"
-"¦b³o¸Ì¡A±z¯à°÷³]©w±zªº http ©ÎªÌ¬O ftp Ãþ«¬ªº¥N²z³]©w¡A¨Ã¥]§t\n"
-"¬O§_­n¨Ï¥Î±K½Xµn¤Jµ¥¾÷¨î\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr "­Y¬O±z¤£­n¨Ï¥Î http ¥N²zªº¸Ü¡A¯d¤UªÅ¥Õ¸ê°T¤£¶ñ¤J§Y¥i"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "³s±µ°ð"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "¥N²z¦øªA¾¹ªº³]©w®æ¦¡¥²¶·¬° http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "³s±µ°ðªºÄæ¦ì³]©w»Ý­n¬°¼Æ¦r"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr "­Y¬O±z¤£­n¨Ï¥Î ftp ¥N²zªº¸Ü¡A¯d¤UªÅ¥Õ¸ê°T¤£¶ñ¤J§Y¥i"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "¥N²z¦øªA¾¹ªº³]©w®æ¦¡¥²¶·¬° ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"½Ð¿é¤J­nµn¤J proxy ¨Ï¥Îªº id »P±K½X¡C­Y¬O¤£¥Îµn¤Jªº¸Ü¡A\n"
-"¯d¤UªÅ¥Õ¤£¶ñ§Y¥i"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "µn¤JID"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "±K½X"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "¦A¦¸¿é¤J±K½X"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "¿é¤Jªº±K½X¤£²Å¦X¡A½Ð­«·s¿é¤J"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "µLªk¦b _¤w®æ¦¡_ ¤ÆªººÏºÐ°}¦C md%d ¤¤¥[¤J¤À³Î°Ï"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "µLªk¼g¤JÀÉ®× %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ¥¢±Ñ"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ¥¢±Ñ (¤]³\¬O raidtools ¨S¦w¸Ë©Ò¾É­Pªº)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "¤À³Î°Ï¼Æ¥Ø¤£¨¬¥H¥Î¨Ó³]©w¦¨¬°¶¥¼h %d ªººÏºÐ°}¦C\n"
-
-#: ../../services.pm_.c:15
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "±Ò°Ê ALSA (Advanced Linux Sound Architecture) ­µ®Ä¨t²Î"
-
-#: ../../services.pm_.c:16
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron ´£¨Ñ¶g´Á©Êªº©R¥O±Æµ{µ{¦¡"
-
-#: ../../services.pm_.c:17
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd ¬O¥Î¨ÓºÊ·þ¹q¦Àª¬ºA¡A¥H¤Î©I¥s syslog ¬ö¿ý¬ÛÃöª¬ºA¡C¦¹¥~¡A\n"
-"·í¹q¦À¹q·½¤£°÷®É¡A¤]¥i¯à¦Û°Ê©I¥sÃö¾÷µ{¦¡¶i¦æÃö¾÷°Ê§@¡C"
-
-#: ../../services.pm_.c:19
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr "atd ªA°Èµ{¦¡¡A¯à°÷Åý±z¦b¦b©R¥O¦C«ü©w¬Y­Ó®É¶¡°õ¦æ¬Y­Óµ{¦¡¡C"
-
-#: ../../services.pm_.c:21
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron ¬O­Ó¼Ð·Çªº UNIX ¨t²Îµ{¦¡¡A¯à°÷´£¨Ñ¨Ï¥ÎªÌ©w´Á°õ¦æ¯S©wµ{¦¡¡C\n"
-"vixie ª©¥»ªº cron ¼W¥[¤F³\¦h¥\¯à¡A¦b¦w¥þ©Ê»P³]©w¤è­±¯à°÷§ó¼u©Ê¦n¥Î¡C"
-
-#: ../../services.pm_.c:24
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ¯à°÷Åý¨t²Î¦b¤å¦r¼Ò¦¡¤UÅX°ÊÅã¥Ü¥X·Æ¹«´å¼Ð¡A¯à°÷¦b Midnight Commander\n"
-"³oÃþµ{¦¡¤¤©Ò¨Ï¥Î¡C¥t¥~ÁÙ¯à°÷¤ä´©¦b¤å¦r¼Ò¦¡¤U¿Ã¹õ¤å¦rªº°Å¶K½Æ»s¥\¯à¡C"
-
-#: ../../services.pm_.c:27
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake µ{¦¡·|¶i¦æµwÅé°»´ú°Ê§@¡A¥H«K©ó³]©w·s¥[¤J©ÎªÌ¬O¦³Åܧó¹L\n"
-"ªº¶gÃä¸Ë¸m¡C"
-
-#: ../../services.pm_.c:29
-msgid ""
-"Apache is a World Wide Web server.  It is used to serve HTML files\n"
-"and CGI."
-msgstr "Apache ¬O¤@­Ó´£¨Ñ Web ªA°Èªºµ{¦¡¡A´£¨Ñ¬[³] Web Server Åý¨Ï¥ÎªÌÂsÄý¡C"
-
-#: ../../services.pm_.c:31
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"internet superserver daemon (¤@¯ëºÙ©I¬° inetd)¡A¥¦¥N¬°¹³¬O telnet¡Bftp,\n"
-"rsh¡Brlogin µ¥µ¥³oÃþªA°ÈªººÊÅ¥¡AµM«á¦³³s½u½Ð¨D®É¡A¦b¹ê»Ú©I¥s´£¨ÑªA°Èªº\n"
-"µ{¦¡¶i¦æ«áÄò¥æ½Í·¾³qªº°Ê§@¡CÃö³¬³o­Ó¶µ¥Ø¡A¥õ¿à©ó³o­ÓªA°È¥N¬°ºÊÅ¥±Ò°Êªº\n"
-"¶µ¥Ø±N·|µLªk¨Ï¥Î"
-
-#: ../../services.pm_.c:35
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"±Ò°Ê Linux Kernel 2.2 ¨t¦Cªº¨¾¤õÀð¾÷¨î¡A¥Î¨Ó«OÅ@±zªº¾÷¾¹¤£·|¾D¨ü\n"
-"¥~¨Óªººô¸ô§ðÀ»¡C"
-
-#: ../../services.pm_.c:37
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"³o­ÓªA°È¶µ¥Ø±N·|¸ü¤J /etc/sysconfig/keyboard ÀɮתºÁä½L¹ïÀ³³]©w²ÕºA¡C\n"
-"±z¥i¥H¨Æ«á¨Ï¥Î kdbconfig µ{¦¡¨Ó³]©w¡C¤@¯ë¨Ó»¡¡A¥Ø«e¤j³¡¤À¾÷¾¹¨Ã¤£»Ý­n\n"
-"³o­Ó¶µ¥Ø¡C"
-
-#: ../../services.pm_.c:40
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"¦Û°Ê²£¥Í kernel header ¸ê°T¬ö¿ý¡Aµ¹³o¨ÇÀɮרϥÎ:\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:42
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "¨t²Î¶}¾÷®É¯à°÷¦Û°Ê°»´ú¶gÃä¸Ë¸mªºª¬ºA¨Ã¥B³]©w¡C"
-
-#: ../../services.pm_.c:43
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr "Linuxconf µ{¦¡·|¦b¶}¾÷®É°»´ú¤@¨Ç¶µ¥Ø¡A½Õ¾ãºûÅ@¨t²Î¤@¨Ç²ÕºA³]©w¡C"
-
-#: ../../services.pm_.c:45
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd ªA°Èµ{¦¡¬O lpr µ{¦¡¹B§@¤W¤£¥i¯Êªºµ{¦¡¡C­Y¬O­n¬[³]¦C¦LªA°È¦øªA¾¹\n"
-"ªº¸Ü¡Alpd ¬O«Ü±`¨£ªº¿ï¾Ü¡C"
-
-#: ../../services.pm_.c:47
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr "Linux Virtual Server, ¥Î¨Ó¬[³]¤@­Ó°ª®Ä¯à»P°ª®Ä²vªº LVS ¦øªA¾¹¡C"
-
-#: ../../services.pm_.c:49
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-"host names to IP addresses."
-msgstr ""
-"named (BIND) ¾A¥Î¨Ó´£¨Ñ Domain Name Server (DNS) ªA°Èªºµ{¦¡¡A\n"
-"¥Î¨Ó¸ÑªR¥D¾÷¦WºÙ»P IP ¹ïÀ³ªºÃö«Y¡C"
-
-#: ../../services.pm_.c:51
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"±¾¸ü»P¨ø¤U©Ò¦³ºô¸ôÀɮרt²Î¡A¤ñ¤è¹³¬O ºô¸ôÀɮרt²Î(NFS), SMB, \n"
-"NCP (NetWare) ³oÃþ¡C"
-
-#: ../../services.pm_.c:53
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr "¦b¨t²Î¶}¾÷®É¡A¿ï¾Ü±Ò°Êºô¸ô¥\¯à¡A©ÎªÌ¬OÃö³¬¤£±Ò°Ê¸ÓªA°È¡C"
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ¬O¤@­Ó±`¥Îªººô¸ô³q°T¨ó©w¡A¯à°÷´£¨Ñ¸óºô¸ô¤À¨É¨ä¥L¥D¾÷ªºÀɮרt²Î¡C\n"
-"³o­ÓªA°È¶µ¥Ø·|¨Ì·Ó¨t²Îªº /etc/exports Àɮ׳]©w¨Ó±Ò°Ê NFS ¤À¨É¥\¯à¡C"
-
-#: ../../services.pm_.c:58
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ¬O¤@­Ó±`¥Îªººô¸ô³q°T¨ó©w¡A¯à°÷´£¨Ñ¸óºô¸ô¤À¨É¨ä¥L¥D¾÷ªºÀɮרt²Î¡C\n"
-"³o­ÓªA°È´£¨Ñ NFS ÀɮפÀ¨É®ÉªºÂê©w¾÷¨î¡C"
-
-#: ../../services.pm_.c:60
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"¯à°÷¦b¶}¾÷®É¶}±Ò NumLock ¿O¡A¥H«K©ó¦b console ©ÎªÌ¬O X ¤U¨Ï¥Î\n"
-"¤E®cÁä¼Æ¦r¥\¯à¡C"
-
-#: ../../services.pm_.c:62
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "¤ä´© OKI 4w ¥H¤Î WindowsPrinter ¦Lªí¾÷¡C"
-
-#: ../../services.pm_.c:63
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA ¤ä´©¡A¤@¯ë¬O¥Î¨ÓÅýµ§°O«¬¹q¸£ªººô¸ô¥d¡BModem ÅX°Ê©Ò³]­p¡C\n"
-"¤@¯ë¨Ó»¡¡A­nÃB¥~³]©w¦n PCMCIA «á¤~·|¯u¥¿±Ò°Ê PCMCIA ªA°È¡A¦]¦¹\n"
-"´Nºâ¬O¨t²Î¤£»Ý­n³o­Ó¥\¯à¡A¹w¥ý±Ò°Ê¥L¤]¤£·|¦³¥ô¦ó¼vÅT¡C"
-
-#: ../../services.pm_.c:66
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper µ{¦¡ºÞ²z¤F RPC ³s½u¡A¤@¯ë¥Î©ó NFS »P NIS ³q°T¨ó©w¤º¡C\n"
-"­Y¬O±z¨t²Î­n¨Ï¥Î¨ì RPC ¬ÛÃöªA°È¡A±z´N¥²¶·±Ò°Ê¥¦¡C"
-
-#: ../../services.pm_.c:69
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that\n"
-"moves mail from one machine to another."
-msgstr "Postfix ¬O¤@­Ó¶l¥ó¶Ç°e¥N²zµ{¦¡¡A¥Î¨Ó§ë»¼«H¥ó´£¨Ñ SMTP ªA°È¡C"
-
-#: ../../services.pm_.c:71
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr "Àx¦s»P¦^¦s°ª«~½è¨t²Î¶Ã¼Æ²£¥Í¾¹"
-
-#: ../../services.pm_.c:73
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"µ¹ block ³oÃþ°Ï¶ô¸Ë¸m«ü¬£ raw ¸Ë¸m (´N¹³¬OµwºÐªº¤À³Î°Ï)¡A\n"
-"¤@¯ë¬Oµ¹ oracle ³oÃþ¯S®íµ{¦¡¨Ï¥Î¡C"
-
-#: ../../services.pm_.c:75
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed ªA°Èµ{¦¡¤¹³\³z¹L RIP ³q°T¨ó©w¨Ó§ó·s¸ô¥Ñªíªº¸ê°T¡C\n"
-"¤@¯ë¨Ó»¡¡ARIP ¬Oµ¹¤p«¬ºô¸ô¥Î³~¨Ï¥Î¡C"
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat ³q°T¨ó©w¡A¯à°÷Åý¦ì©óºô¸ô¤Wªº¨Ï¥ÎªÌ±µ¦¬¨ìºô¸ô¤W¥ô¦ó¤@¥x\n"
-"¥D¾÷ªº¹B§@®Ä¯à¸ê°T¡C"
-
-#: ../../services.pm_.c:80
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers ³q°T¨ó©w¡A¯à°÷Åý¦ì©óºô¸ô¤Wªº¨Ï¥ÎªÌ±oª¾¨º¨Ç¨Ï¥ÎªÌµn¤J¦b¨º¨Ç\n"
-"¾÷¾¹¤W"
-
-#: ../../services.pm_.c:82
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho ³q°T¨ó©w¡A¯à°÷Åý»·ºÝªº¨Ï¥ÎªÌÀò±o¸Ó¾÷¾¹¤W©Ò¦³µn¤J¦b¥D¾÷¤Wªº\n"
-"¨Ï¥Î§ä (Ãþ¦ü©ó finger)¡C"
-
-#: ../../services.pm_.c:84
-msgid "Launch the sound system on your machine"
-msgstr "¦b±zªº¨t²Î¤W±Ò°Ê­µ®ÄªA°È¨t²Î"
-
-#: ../../services.pm_.c:85
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"syslog ªA°Èµ{¦¡¯à°÷Åý¨t²Î³\¦hªA°Èµ{¦¡¥Î log ¬ö¿ýÀɮרӬö¿ý¨t²Î\n"
-"©Òµo¥Í¤@¨Ç¨Æ±¡¡C«Øij±z¤@©w­n±Ò°Ê syslog ªA°Èµ{¦¡¡C"
-
-#: ../../services.pm_.c:87
-msgid "Load the drivers for your usb devices."
-msgstr "¸ü¤J usb ¸Ë¸m©Ò»Ý­nªºÅX°Êµ{¦¡¡C"
-
-#: ../../services.pm_.c:88
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "±Ò°Ê X Font Server (X Window Àô¹Ò·|»Ý­n¥Î¨ì)"
-
-#: ../../services.pm_.c:114 ../../services.pm_.c:156
-msgid "Choose which services should be automatically started at boot time"
-msgstr "¿ï¾Ü§Æ±æ¦b¤U¤@¦¸¶}¾÷®É±Ò°ÊªºªA°Èµ{¦¡¶µ¥Ø"
-
-#: ../../services.pm_.c:126
-msgid "Printing"
-msgstr "¦C¦L"
-
-#: ../../services.pm_.c:127
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:130
-msgid "File sharing"
-msgstr "ÀɮפÀ¨É"
-
-#: ../../services.pm_.c:132
-msgid "System"
-msgstr "¨t²Î"
-
-#: ../../services.pm_.c:137
-msgid "Remote Administration"
-msgstr "»·ºÝºÞ²z"
-
-#: ../../services.pm_.c:145
-msgid "Database Server"
-msgstr "¸ê®Æ®w³nÅé"
-
-#: ../../services.pm_.c:174
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "ªA°Èµ{¦¡: %d ¤w¸g±Ò°Ê¡A¦@¦³ %d µù¥Uªº¶µ¥Ø"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Server µ{¦¡"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "°õ¦æ¤¤"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "°±¤î"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "ªA°Èµ{¦¡"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additionnal information\n"
-"about this service, sorry."
-msgstr ""
-"©êºp ! ³o­ÓªA°È¶µ¥Ø¨Ã¨S¦³\n"
-"ÃB¥~ªº¬ÛÃö¸ê°T¡C"
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "©ó¶}¾÷®É"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "¥¿¦b¦w¸Ë®M¥ó..."
-
-#: ../../standalone/diskdrake_.c:63
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"µ{¦¡µLªkŪ¨ú±zªºµwºÐ¤À³Î°Ï°t¸mªí¡A³o­Ó°t¸mªí¦³°ÝÃD :(\n"
-"µ{¦¡·|¸ÕµÛ©¿²¤Ãa±¼ªº¤À³Î°Ï¥H«á¦AÄ~Äò¡C"
-
-#: ../../standalone/drakautoinst_.c:44
-msgid "Error!"
-msgstr "¿ù»~"
-
-#: ../../standalone/drakautoinst_.c:45
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "§Ú§ä¤£¨ì³o­Ó­«­nªºÀÉ®× %s"
-
-#: ../../standalone/drakautoinst_.c:47
-msgid "Auto Install Configurator"
-msgstr "¦Û°Ê¦w¸Ë³]©wµ{¦¡"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"¥Ø«e·Ç³Æ³]©w¦Û°Ê¦w¸ËºÏ¤ù¡C³o­Ó¥\¯à¦³ÂI¦MÀI¡A¨Ï¥Î¤W­n«Ü·V­«¡C\n"
-"\n"
-"³o­Ó¥\¯à¡A±z±N¯à°÷«Ü¦Û°Êªº¦b©Ò­n¦w¸Ëªº¹q¸£¤W¦Û°Ê¶i¦æ¦w¸Ëªº°Ê§@¡A¦³¨Ç¨BÆJ«h¯à"
-"°÷°±¤U¨ÓÅý¨Ï¥ÎªÌ¦Û¤v¤â°Ê¶i¦æ¤@¨Ç¾Þ§@¡C\n"
-"\n"
-"¬°¤F³Ì¦w¥þ¦Ò¶q¡A©Ò¦³¤À³Î°Ï¹º¤À¥H¤Î®æ¦¡¤Æ°Ê§@±N·|¦Û°Ê¶i¦æ¡C\n"
-"\n"
-"±z§Æ±æÄ~Äò¶Ü¡H"
-
-#: ../../standalone/drakautoinst_.c:70
-msgid "Automatic Steps Configuration"
-msgstr "¦Û°Ê¤Æ¨BÆJ³]©w"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr "½Ð¿ï¾Ü¨C¤@­Ó¦w¸Ëªº¨BÆJ¡A³o¨Ç±N·|¬O±z©Ò¾Þ§@ªº¦w¸Ë¹Lµ{"
-
-#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
-msgid "Congratulations!"
-msgstr "®¥³ß!!"
-
-#: ../../standalone/drakautoinst_.c:113
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"¤w¸g¦¨¥\«Ø¥ß¦Û°Ê¦w¸ËºÏ¤ù¡C\n"
-"±z¥i¥H¨Ï¥Î³o±iºÏ¤ù¶i¦æ¦Û°Ê¦w¸Ëªºµ{§Ç"
-
-#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
-msgid "Internet Connection Sharing"
-msgstr "Internet ³s½u¤À¨É"
-
-#: ../../standalone/drakgw_.c:119
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internet ³s½u¤À¨É¥Ø«e³B©ó¥i¥Îª¬ºA"
-
-#: ../../standalone/drakgw_.c:120
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"¥Ø«e Internet ³s½u¤À¨Éªº³]©w¤w¸g§¹¦¨¤F.. ¥Ø«e¤w¸g¥i¥Î¤F..\n"
-"±z¥Ø«e¥´ºâ­n°µ¤°»ò©O¡H"
-
-#: ../../standalone/drakgw_.c:124
-msgid "disable"
-msgstr "Ãö³¬"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "dismiss"
-msgstr "¨ú®ø"
-
-#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
-msgid "reconfigure"
-msgstr "­«·s³]©w"
-
-#: ../../standalone/drakgw_.c:127
-msgid "Disabling servers..."
-msgstr "¥¿¦bÃö³¬¦øªA¾¹..."
-
-#: ../../standalone/drakgw_.c:135
-msgid "Internet connection sharing is now disabled."
-msgstr "Internet ³s½u¦@¨É¥Ø«eÃö³¬¤F¡C"
-
-#: ../../standalone/drakgw_.c:144
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internet ³s½u¦@¨É¥Ø«eÃö³¬¤F¡C"
-
-#: ../../standalone/drakgw_.c:145
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internet ³s½u¦@¨É¤w¸g³]©w§¹¦¨¤F¡C¥Ø«e¬O³B©óÃö³¬¤£¨Ï¥Îª¬ºA¡C\n"
-"\n"
-"±z§Æ±æ­n³B²z¨º­Ó¡H"
-
-#: ../../standalone/drakgw_.c:149
-msgid "enable"
-msgstr "¶}±Ò"
-
-#: ../../standalone/drakgw_.c:156
-msgid "Enabling servers..."
-msgstr "¶}±Ò¦øªA¾¹¤¤..."
-
-#: ../../standalone/drakgw_.c:161
-msgid "Internet connection sharing is now enabled."
-msgstr "Internet ³s½u¤u·Q¥Ø«e¶}±Ò¤F¡C"
-
-#: ../../standalone/drakgw_.c:182
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"¥Ø«e­n¶i¦æ Internet ³s½u¤À¨Éªº³]©w¡A³o­Ó¥\¯à¯à°÷Åý¨ä¥L°Ï°ìºô¸ô¤ºªº¹q¸£\n"
-"³z¹L³o¥x¥D¾÷ªºÀW¼e¤À¨É³s¤W Internet¡C\n"
-"\n"
-"½Ðª`·N: ±z»Ý­n¥t¥~¤@±iºô¸ô¥d¥H«K©ó´£¨Ñ°Ï°ìºô¸ô¹q¸£³s½u¦s¨ú¤À¨É¨Ï¥Î¡C"
-
-#: ../../standalone/drakgw_.c:208
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "¤¶­± %s (¨Ï¥Î %s ¼Ò²Õ)"
-
-#: ../../standalone/drakgw_.c:209
-#, c-format
-msgid "Interface %s"
-msgstr "¤¶­± %s"
-
-#: ../../standalone/drakgw_.c:217
-msgid "No network adapter on your system!"
-msgstr "±z¨t²Î¨Ã¨S¦³ºô¸ô¥d¦s¦b"
-
-#: ../../standalone/drakgw_.c:218
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr "±z¨t²Î°»´ú¤£¨ì¦³ºô¸ô¥dªº¦s¦b¡C½Ð­«·s°õ¦æµwÅé³]©w¤u¨ã¡C"
-
-#: ../../standalone/drakgw_.c:224
-msgid "Network interface"
-msgstr "ºô¸ô¤¶­±"
-
-#: ../../standalone/drakgw_.c:225
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"±zªº¨t²Î¥Ø«e¦³¤@±i¤w¸g³]©w¦nªººô¸ô¥d:\n"
-"\n"
-"%s\n"
-"\n"
-"²{¦b­n¶i¦æ³o±iºô¸ô¥d»P°Ï°ìºô¸ôªº³s½u²ÕºA³]©w¡C"
-
-#: ../../standalone/drakgw_.c:234
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "½Ð¿ï¾Ü­n³s½u¨ì°Ï°ìºô¸ô¤ºªººô¸ô¥d¡C"
-
-#: ../../standalone/drakgw_.c:243
-msgid ""
-"Warning, the network adapter is already configured. I will reconfigure it."
-msgstr "ĵ§i: ºô¸ô¥d³]©w¤w¸g©ó¥ý«e³]©w¦n¤F¡C²{¦b±N·|­«·s³]©w¹L¡C"
-
-#: ../../standalone/drakgw_.c:254
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Potential LAN ¦ì§}»P¥Ø«e¦b %s §ä¨ìªº³]©w¬Û½Ä¬ð!\n"
-
-#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
-msgid "Firewalling configuration detected!"
-msgstr "¨¾¤õÀð³]©w¤w¸g°»´ú¨ì¤F!"
-
-#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"ĵ§i ! °»´ú¨ì²{¦³¤w¸g¦s¦bªº¨¾¤õÀð²ÕºA³]©w¡C±zÀ³¸Ó¦b¦w¸Ë¤§«á¤â°Ê­×¥¿¤@¨Ç ¥²­n"
-"ªº³]©w¶µ¥Ø¡C"
-
-#: ../../standalone/drakgw_.c:277
-msgid "Configuring..."
-msgstr "³]©w¤¤..."
-
-#: ../../standalone/drakgw_.c:278
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "³]©w script, ¦w¸Ë³nÅé¡A±Ò°Ê¬ÛÃöªº servers ªA°È"
-
-#: ../../standalone/drakgw_.c:311
-#, c-format
-msgid "Problems installing package %s"
-msgstr "¦w¸Ë %s ®M¥óµo¥Í¿ù»~"
-
-#: ../../standalone/drakgw_.c:600
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"¨C­Ó¶µ¥Ø³£¤w¸g³]©w¦n¤F¡C\n"
-"²{¦b±zªº¨t²Î¤w¸g³z¹L DHCP °ÊºA IP ¤À°tªº¤è¦¡¨ú±o³s½u IP¡A¨Ã¥B¤]¤w¸g¯à°÷³z¹L¨ä"
-"¥L¹q¸£ªºÀW¼e¤À¨É¦s¨ú Internet ªA°È¡C"
-
-#: ../../standalone/drakgw_.c:617
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "³o­Ó³]©w¥ý«e¤w¸g§¹¦¨¤F¡A¤£¹L¥Ø«e¬O³B²zÃö³¬¨S±Ò¥Îªºª¬ºA"
-
-#: ../../standalone/drakgw_.c:618
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "³o­Ó³]©w¥ý«e¤w¸g§¹¦¨¤F¡A¥Ø«e¬O³B²z¶}±Ò¥i¥Îªºª¬ºA"
-
-#: ../../standalone/drakgw_.c:619
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Internet ³s½u¤À¨É©|¥¼³]©w¡C"
-
-#: ../../standalone/drakgw_.c:624
-msgid "Internet connection sharing configuration"
-msgstr "Internet ³s½u¤À¨É³]©w"
-
-#: ../../standalone/drakgw_.c:631
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Åwªï¨Ó¨ì Internet ³s½u¤À¨É³]©w¤u¨ã!\n"
-"\n"
-"%s\n"
-"\n"
-"ÂI¿ï³]©w¨Ó±Ò°Ê³]©wºëÆF¡C"
-
-#: ../../standalone/draknet_.c:79
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ºô¸ô²ÕºA (%d ¤¶­±¥d)"
-
-#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
-msgid "Profile: "
-msgstr "Profile:"
-
-#: ../../standalone/draknet_.c:94
-msgid "Del profile..."
-msgstr "§R°£³]©wÀɤ¤..."
-
-#: ../../standalone/draknet_.c:100
-msgid "Profile to delete:"
-msgstr "­n§R°£¨º­Ó³]©wÀÉ:"
-
-#: ../../standalone/draknet_.c:128
-msgid "New profile..."
-msgstr "·s³]©wÀÉ ..."
-
-#: ../../standalone/draknet_.c:134
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr "­n«Ø¥ßªº³]©wÀɦWºÙ (·sªº³]©wÀÉ·|¥ý¥Ñ¥Ø«eªº³]©wÀɽƻs¤º®e¹L¨Ó):"
-
-#: ../../standalone/draknet_.c:160
-msgid "Hostname: "
-msgstr "¥D¾÷¦WºÙ:"
-
-#: ../../standalone/draknet_.c:167
-msgid "Internet access"
-msgstr "Internet ¦s¨ú"
-
-#: ../../standalone/draknet_.c:180
-msgid "Type:"
-msgstr "®æ¦¡: "
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Gateway:"
-msgstr "¹h¹D¾¹:"
-
-#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
-msgid "Interface:"
-msgstr "¤¶­±:"
-
-#: ../../standalone/draknet_.c:192
-msgid "Status:"
-msgstr "ª¬ºA:"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Connected"
-msgstr "¤w³s½u"
-
-#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
-msgid "Not connected"
-msgstr "©|¥¼³s½u"
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Connect..."
-msgstr "³s½u¤¤..."
-
-#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
-msgid "Disconnect..."
-msgstr "Â_½u¤¤..."
-
-#: ../../standalone/draknet_.c:215
-msgid "Starting your connection..."
-msgstr "¶}©l±zªººô¸ô³s½u¤¤..."
-
-#: ../../standalone/draknet_.c:223
-msgid "Closing your connection..."
-msgstr "¥¿¦bÃö³¬±zªººô¸ô³s½u¤¤..."
-
-#: ../../standalone/draknet_.c:228
-msgid ""
-"The connection is not closed.\n"
-"Try to do it manually by running\n"
-"/etc/sysconfig/network-scripts/net_cnx_down\n"
-"in root."
-msgstr ""
-"¸Ó³s½u¨Ã¨S¦³¤ÁÂ_¡C\n"
-"½Ð¤Á´«¨ì root ¨­¥÷°õ¦æ¤U­±«ü¥O:\n"
-"/etc/sysconfig/network-scripts/net_cnx_down"
-
-#: ../../standalone/draknet_.c:231
-msgid "The system is now disconnected."
-msgstr "¨t²Î¤w¸g¤ÁÂ_³s½u"
-
-#: ../../standalone/draknet_.c:243
-msgid "Configure Internet Access..."
-msgstr "³]©w internet ¦s¨ú"
-
-#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
-msgid "LAN configuration"
-msgstr "°Ï°ìºô¸ô³]©w"
-
-#: ../../standalone/draknet_.c:255
-msgid "Driver"
-msgstr "ÅX°Êµ{¦¡"
-
-#: ../../standalone/draknet_.c:255
-msgid "Interface"
-msgstr "¤¶­±"
-
-#: ../../standalone/draknet_.c:255
-msgid "Protocol"
-msgstr "³q°T¨ó©w"
-
-#: ../../standalone/draknet_.c:255
-msgid "State"
-msgstr "ª¬ºA"
-
-#: ../../standalone/draknet_.c:267
-msgid "Configure Local Area Network..."
-msgstr "³]©w°Ï°ìºô¸ô..."
-
-#: ../../standalone/draknet_.c:279
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:306
-msgid "Apply"
-msgstr "®M¥Î"
-
-#: ../../standalone/draknet_.c:325
-msgid "Please Wait... Applying the configuration"
-msgstr "½Ðµy«Ý... ®M¥Î¸Ó³]©w¤¤"
-
-#: ../../standalone/draknet_.c:428
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"±zÁÙ¨S¦³¥ô¦ó¤w¸g³]©w¦nªººô¸ô¤¶­±¡C\n"
-"½ÐÂI¿ï³]©w¨Ó¶i¦æºô¸ô¤¶­±³]©w°Ê§@"
-
-#: ../../standalone/draknet_.c:450
-msgid "LAN Configuration"
-msgstr "°Ï°ìºô¸ô³]©w"
-
-#: ../../standalone/draknet_.c:457
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "¤¶­±¥d %s: %s"
-
-#: ../../standalone/draknet_.c:463
-msgid "Boot Protocol"
-msgstr "±Ò°Ê³q°T¨ó©w"
-
-#: ../../standalone/draknet_.c:464
-msgid "Started on boot"
-msgstr "¶}¾÷®É«K±Ò°Ê"
-
-#: ../../standalone/draknet_.c:465
-msgid "DHCP client"
-msgstr "DHCP ¥Î¤áºÝ"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "activate now"
-msgstr "²{¦b¥ß§Y±Ò°Ê"
-
-#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
-msgid "desactivate now"
-msgstr "²{¦b¥ß§YÃö³¬"
-
-#: ../../standalone/draknet_.c:538
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"±zÁÙ¨S¦³¥ô¦ó Internet ³s½u³]©w¡C½Ð¥ýÂI¿ï\n"
-"³]©w«ö¶s¨Ó«Ø¥ß¤@­Ó Internet ³s½u³]©w¤º®e"
-
-#: ../../standalone/draknet_.c:562
-msgid "Internet connection configuration"
-msgstr "Internet ³s½u³]©w"
-
-#: ../../standalone/draknet_.c:566
-msgid "Internet Connection Configuration"
-msgstr "Internet ³s½u³]©w"
-
-#: ../../standalone/draknet_.c:575
-msgid "Connection type: "
-msgstr "³s½u¶µ¥Ø:"
-
-#: ../../standalone/draknet_.c:581
-msgid "Parameters"
-msgstr "°Ñ¼Æ"
-
-#: ../../standalone/draknet_.c:608
-msgid "Ethernet Card"
-msgstr "Etnernet ¤¶­±¥d"
-
-#: ../../standalone/draknet_.c:609
-msgid "DHCP Client"
-msgstr "DHCP ¥Î¤áºÝ"
-
-#: ../../standalone/draksec_.c:21
-msgid "Welcome To Crackers"
-msgstr "Åwªï Cracker ªº¥úÁ{"
-
-#: ../../standalone/draksec_.c:22
-msgid "Poor"
-msgstr "»¹"
-
-#: ../../standalone/draksec_.c:26
-msgid "Paranoid"
-msgstr "ºÆ¨gª¬ºA"
-
-#: ../../standalone/draksec_.c:29
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"§â¦w¥þ¾÷¨î³]©w¦b³o­Óµ¥¯Å®É¥²¶·­n«D±`ÂÔ·V¡A¥¦·|Åý±zªº¨t²Î¥Î°_¨Ó§ó¥[²©ö\n"
-"¤è«K¡A¥i¬O«o·¥©ö¨ü¨ì¯}Ãa: ³o­Ó³]©w¤£À³¸Ó³Q¥Î¦b¦³³s½u¨ì Internet ªº¥D¾÷¡A\n"
-"¦]¬°©Ò¦³ªº¦s¨ú°Ê§@³£¨S¦³¥Î±K½X¥[¥H­­¨î¡C"
-
-#: ../../standalone/draksec_.c:32
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr "¤w±Ò°Ê±K½X»{ÃÒ¥\¯à¡A¦ý¤´µM¤£«Øij±N¦¹¨t²Î©ñ¨ìºô¸ô¤W­±¡C"
-
-#: ../../standalone/draksec_.c:33
-msgid ""
-"Few improvements for this security level, the main one is that there are\n"
-"more security warnings and checks."
-msgstr ""
-"³o­Óµ{«×ªº¦w¥þ¾÷¨î³]©w¤S°µ¤F¨Ç·Lªº§ïµ½¡A¥D­nªº¤@ÂI¬OÅýµ{¦¡²£¥Í§ó¦h»P\n"
-"¨t²Î¦w¥þ©Ê¬ÛÃöªºÄµ§i¡A¨Ã§@§ó¦hªºÀˬd¡C"
-
-#: ../../standalone/draksec_.c:35
-msgid ""
-"This is the standard security recommended for a computer that will be used\n"
-"to connect to the Internet as a client. There are now security checks. "
-msgstr ""
-"³o¬O¼Ð·Çªº¨t²Î¦w¥þ©Ê³]©w¡A¦³µÛ¤@¯ëªº¦w¥þ©ÊÀˬd¡F«Øij¥Î¦b¦³ Intenet ³s½uªº\n"
-"«È¤áºÝ¥D¾÷¤§¤W¡C"
-
-#: ../../standalone/draksec_.c:37
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. "
-msgstr ""
-"¥Î³o­Óµ¥¯Åªº¦w¥þ¾÷¨î³]©w¡A·|§@°ª«×ªº¦w¥þ©Ê¬ÛÃöªºÀˬd»P³]©w¡A¨t²Î\n"
-"¤~¾A¦X¥Î¨Ó§@¬°´£¨Ñ¤j¶qºô¸ô³s½uªº¦øªA¾¹¨Ï¥Î¡C"
-
-#: ../../standalone/draksec_.c:40
-msgid ""
-"We take level 4 features, but now the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"§Ú­Ì±µ¨ü²Ä¥|¯Åªº·s¥\¯à¡A¥i¬O¦p¦¹¤@¨Ó¨t²Î±N·|§¹¥þ³Q«Ê³¬¦í¡C\n"
-"¦UºØ¦w¥þ©Ê¬ÛÃöªº¥\¯à³£³]©w¦b³ÌÄY±Kªºª¬ºA¡C"
-
-#: ../../standalone/draksec_.c:65
-msgid "Security level"
-msgstr "¦w¥þµ¥¯Å"
-
-#: ../../standalone/draksec_.c:67
-msgid "Use libsafe for servers"
-msgstr "±Ò¥Î libsafe ¨¾Å@¥\¯à"
-
-#: ../../standalone/draksec_.c:68
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "¯à°÷°»´ú¨¾¿m½w½Ä°Ï·¸¦ì»P®æ¦¡¤Æ¦r¦ê³oÃþ§ðÀ»ªºµ{¦¡®w®M¥ó¡C"
-
-#: ../../standalone/draksec_.c:72
-msgid "Setting security level"
-msgstr "³]©w¦w¥þµ¥¯Å"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "±±¨î¤¤¤ß"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "¿ï¨ú±z·Q¨Ï¥Îªº¤u¨ã"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "usage: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "±z§Æ±æ BackSpace «á°hÁä¯à°÷¦b console ¤U¦^À³ Delete «öÁ䪺¥\¯à¶Ü¡H"
-
-#: ../../standalone/livedrake_.c:23
-msgid "Change Cd-Rom"
-msgstr "§ïÅÜ CD-ROM"
-
-#: ../../standalone/livedrake_.c:24
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"½Ð©ñ¤J¦w¸Ë CD ¥úºÐ¤ù¡AµM«á«ö¤U ½T©w «ö¶sÄ~Äò¦w¸Ë¡C¦pªG±z¨Ã¨S¦³³o¤ù CD \n"
-"ªº¸Ü¡A½Ð«ö¤U ¨ú®ø «ö¶s¥HÁקK±Ò°Ê½u¤W¤É¯Åªºµ{¦¡¡C"
-
-#: ../../standalone/livedrake_.c:34
-msgid "Unable to start live upgrade !!!\n"
-msgstr "µLªk±Ò°Ê½u¤W§ó·sµ{¦¡ !!!\n"
-
-#: ../../standalone/mousedrake_.c:58
-msgid "no serial_usb found\n"
-msgstr "§ä¤£¨ì§Ç¦C usb °ð\n"
-
-#: ../../standalone/mousedrake_.c:62
-msgid "Emulate third button?"
-msgstr "¼ÒÀÀ¤TÁä·Æ¹«ªº¥\¯à ¡H"
-
-#: ../../standalone/tinyfirewall_.c:29
-msgid "Firewalling Configuration"
-msgstr "¨¾¤õÀð³]©w"
-
-#: ../../standalone/tinyfirewall_.c:42
-msgid "Firewalling configuration"
-msgstr "¨¾¤õÀð³]©w"
-
-#: ../../standalone/tinyfirewall_.c:77
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"±z¤w¸g³]©w¹L¨¾¤õÀ𪺾÷¨î¤F¡C\n"
-"½ÐÂI¿ï³]©w¨Ó§ïÅܤº®e²ÕºA¡A©ÎªÌ¬O¿ï¾Ü²¾°£§â­ì¥»³]©w§R°£"
-
-#: ../../standalone/tinyfirewall_.c:81
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"¨¾¤õÀð\n"
-"\n"
-"ÂI¿ï¨¾¤õÀð¨Ó³]©w²£¥Í¤@­Ó¼Ð·Çªº¨¾¤õÀð¨¾Å@¥\¯à"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "¿ï¾Ü¨Ï¥Îªº»y¨t"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "¿ï¾Ü¦w¸Ë¼Ò¦¡"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "µwºÐ°»´ú"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "³]©w·Æ¹«"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "¿ï¨úÁä½L§Î¦¡"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "¦w¥þ©Ê³]©w"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "³]©wÀɮרt²Î"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "µwºÐ®æ¦¡¤Æ"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "¿ï¨úµ{¦¡®M¥ó"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "¦w¸Ë¨t²Î"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "·s¼W¨Ï¥ÎªÌ"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "³]©wºô¸ô³s½u"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "³]©w¨t²ÎªA°È"
-
-#: ../../steps.pm_.c:30
-msgid "Create a bootdisk"
-msgstr "»s§@¶}¾÷ºÏ¤ù"
-
-#: ../../steps.pm_.c:32
-msgid "Install bootloader"
-msgstr "¦w¸Ë¶}¾÷µ{¦¡"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "³]©w X Àô¹Ò"
-
-#: ../../steps.pm_.c:34
-msgid "Exit install"
-msgstr "Â÷¶}¦w¸Ëµ{¦¡"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"»´¶q«¬¨¾¤õÀð³]©wµ{¦¡\n"
-"\n"
-"³o¬O¥Î¨Ó³]©w Mandrake Linux ¾÷¾¹¤Wªº­Ó¤H¨¾¤õÀ𪺲պA¡C\n"
-"Ãö©ó³o¤è­±¸ê°T¡A±z¥i¥H°Ñ¾\ Mandrake ¥t¥~­q°µªº¤@¾ã®M - \n"
-"MandrakeSecurity Firewall distribution ¸ê°T¡C"
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"¤U­±§Ú­Ì±N·|¶i¦æ¤@¨Ç°ÝÃDªº¸ß°Ý¡A¹³¬O¤¹³\¶}©ñ¨º¨ÇªA°È¯àÅý¥~­±¯à°÷¦s¨ú¨ì¡C\n"
-"½Ð¥J²ÓªºÆ[¬Ý¤U­±ªº¤@¨Ç°ÝÃD¡A¦]¬°³oÃö«Y©ó±z¹q¸£ªººô¸ô¦w¥þ°ÝÃD\n"
-"\n"
-"½Ðª`·N¤@¤U¡A¦pªG±z¨Ã¨S¦³­n¨Ï¥Î³o¨ÇªA°È¡A¨¾¤õÀð³]©w¥i¥HÃö³¬¡C¹ï¤F¡A\n"
-"©¹«á¦³³]©w»Ý­n¡A¦A°õ¦æ³]©wµ{¦¡¨Ó½Õ¾ã¤]¬O¥i¥Hªº¡C"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"±z¥´ºâÅý³o¥x¦øªA¾¹¦¨¬° Web ¦øªA¾¹¶Ü¡H­Y¬O§A³o¥x¾÷¾¹¨Ã¤£¥´ºâ¥Î¨Ó©ñ¸m\n"
-"ºô­¶ÀÉ®×µM«á´£¨Ñ¥L¤H¯à°÷³z¹LÂsÄý¾¹ÂsÄý¦s¨úªº¸Ü¡A³o¸Ì±z¥i¥H¿ï¾Ü §_¡C\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr "±z¥´ºâÅý³o¥x¦øªA¾¹¦¨¬° DNS ¦øªA¾¹¶Ü¡H­Y¬O¤£»Ý­nªº¸Ü¡A½Ð¿ï¾Ü §_¡C\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"±z§Æ±æ¯à°÷¤¹³\ Secure Shell (ssh) »·ºÝµn¤Jªº³s½uªA°È¶Ü¡Hssh ¬O¤@­Ó¥Î¨Ó\n"
-"¨ú¥N telnet ªº³s½uµ{¦¡¡A»P telnet µ{¦¡ªº®t²§©Ê¦b©ó¨Ï¥Î ssh ³s½u¹Lµ{¤¤\n"
-"©Ò¦³ªº¶Ç¿é¤º®e³£¬O¥[±Kªº... ©Ò¥H§Ú­Ì«Øij­Y¬O§A­ì¥»¦³¥´ºâ¶}©ñ telnet\n"
-"»·ºÝµn¤JªA°Èªº¸Ü¡A¥i¥H¦Ò¼{§ï¥Î ssh ¨ú¥N­ì¥» telnet ªº¨Ï¥Î¡C·í¨Ï¥Î ssh\n"
-"«á¡A¦]¬°¾ã­Óºô¸ô¶Ç¿é¤º®e³£¬O¥[±K¹Lªº¡A¦]¦¹¦³¤ß¤H¤hµLªk»´©öªºÅѨúºô¸ô\n"
-"¶Ç¿é¤¤ªº¤º®e¡A¦p¦¹ºô¸ô§@·~Àô¹Ò·|§ó¥[¦w¥þ¡C"
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"±z§Æ±æ¯à°÷¤¹³\ telnet »·ºÝµn¤Jªº³s½uªA°È¶Ü¡H\n"
-"¶}©ñ telnet »·ºÝµn¤J¥\¯à¬O¬Û·í¤£¦w¥þªº¡A¦b¥ý«eªº¿Ã¹õµe­±¤¤\n"
-"§Ú­Ì¤w¸g´£¤Î¹L¤F¡C¦]¦¹§Ú­Ì«Øij±z³oÃ䤣­n¿ï¾Ü¶}©ñ telnet »·ºÝµn¤J\n"
-"ªºªA°È¡A§ï¥Î ssh ³oÃþ¦³¦w¥þ¥[±Kªº»·ºÝµn¤Jµ{¦¡·|¤ñ¸û¦w¥þ¡C\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"±z¥´ºâÅý³o¥x¦øªA¾¹¦¨¬° FTP ¥D¾÷¨Ã¥B´£¨Ñ¥~¨Ó Internet ªº¦s¨ú¶Ü¡H\n"
-"¦pªG¬Oªº¸Ü¡A¤@¯ë§Ú­Ì«Øij±z¥u¶}©ñ anonymous ³oÃþ°Î¦W¨Ï¥ÎªÌµn¤J¨Ï¥Î\n"
-"¸û¨Î¡C¦]¬°­Y¬O¶}©ñ¤¹³\¯u¹ê±b¸¹µn¤J¦s¨úªº¸Ü¡A¦]¬°ºô¸ô¶Ç¿é¤º®e³£¬O\n"
-"¥¼¸g¹L¥[±Kªº¡A©Ò¥Hµn¤J®É©Ò¿é¤Jªº±K½X´N«Ü¦³¥i¯à³Q¦³¤ß¤H¤hºÊÅ¥¨ì¡C\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"±z¥´ºâÅý³o¥x¦øªA¾¹¦¨¬°¶l¥ó¦øªA¾¹¶Ü¡H¦pªG§A§Æ±æ¨Ï¥Î pine¡Bmutt ©ÎªÌ\n"
-"¬O¤@¨Ç¤å¦r¼Ò¦¡ªºÅª«H³nÅ馬µo mail ªº¸Ü¡A¨º´NÀ³¸Ó¬O¤F¡C­n¤£µM¡A\n"
-"§AÀ³¸Ó³]©w§â³o­Ó firewall ³]©wÃö³¬¡C\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"±z³o¥x¦øªA¾¹¦³­n¶] POP ©ÎªÌ¬O IMAP ³oÃþªA°È¶Ü¡H³o¨ÇªA°È¯à°÷Åý\n"
-"³o¥x¦³±b¸¹ªº¨Ï¥ÎªÌ¯à°÷¨Ï¥Î¤@¨Ç¶l¥ó³nÅé¦s¨ú³o¥x¥D¾÷¤Wªº­Ó¤H«H¥ó¡C\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"±z¥Ø«e¨t²Î¦ü¥G¬O¨Ï¥Î kernel 2.2 ªºª©¥»¡C¦pªG±z¹q¸£ IP ¬O¥Ñ\n"
-"DHCP µ¥µ¥³oÃþ¦øªA¾¹¤À°tµ¹±zªº¡A§Ú­Ì´N»Ý­n¤¹³\³o­Ó¶µ¥Ø¡C\n"
-"¨º¥Ø«e¬O³o­Ó±¡ªp¶Ü¡H\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"±z­n³]©wÅý±zªº¹q¸£¨t²Î®É¶¡»P¥t¥~¤@¥x¹q¸£¦P¨B¹ï®É¶Ü¡H¤@¯ë¨Ó»¡¡A\n"
-"³o¹ï©ó±z¨t²Î­Y¬O·í¤@­Ó¦øªA¾¹´£¨Ñ¹B§@¡AµM«á¦³log µ¥³oÃþ¬ö¿ýªº¸Ü¡A\n"
-"¨t²Î®É¶¡ªº¥¿½T©Ê´N¬Û·í­«­n¡C­Y¬O±z¹q¸£¬O¤@¯ë®à¤W«¬ªº¥Î³~¡A³o­Ó\n"
-"¶µ¥Ø±z¤]³\´N¤£¬O¬Û·í»Ý­n¡C"
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"³]©w§¹¦¨¡C±z­n§â³o¨ÇÅܧó¼g¤JºÏºÐ¶Ü¡H\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "µLªk¶}±Ò %s ÀÉ®×: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "¹ï %s Àɮ׶i¦æ¼g¤J®Éµo¥Í¿ù»~: %s\n"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "¥Î¤áºÝºô¸ôÀô¹Ò"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, ssh server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office ³nÅé"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome Àô¹Ò"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Palm, Visor ¬ÛÃö¤u¨ã"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "¤u§@¯¸Àô¹Ò"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "¨¾¤õÀð/¸ô¥Ñ¾¹"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "DNS »P NIS ¦øªA¾¹"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"¿ì¤½³nÅé: ¤å®Ñ³B²z³nÅé (kword, abiword), ¸Õºâªí (kspread, gnumeric), pdf ¾\Ū"
-"µ{¦¡µ¥µ¥"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "»PÁn­µ¡B­µ®Ä¦³Ãöªº¤u¨ã: mp3¡Bmidi¡Bmixer µ¥¬ÛÃöµ{¦¡"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Linux ¨t²Î»P¤@¨Ç§K¶O³nÅ骺®ÑÄy¡BHOWTO ¤å¥ó"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE Àô¹Ò"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, µ¥µ¥ºÞ²zµ{¦¡"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "¦h´CÅé - ¼v¹³"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "mail, news, web, ftp client, »P chat µ¥¤u¨ã"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "¸ê®Æ®w³nÅé"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL or MySQL ¸ê®Æ®w"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Åý±z¤è«K³]©w±z¨t²Îªº¤u¨ã"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "¦h´CÅé - ­µ®Ä"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "µ{¦¡¤u¨ã®w"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "¤å¥óÀÉ®×"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Console ¤u¨ã"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix MTA ³nÅé, INN ·s»D¸s²Õ³nÅé"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet ¤u§@¯¸"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "¦h´CÅé¤u§@¯¸"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "²ÕºA³]©w"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "§ó¦h¹Ï§Î¤Æªº®à­±ºÞ²zµ{¦¡ (Gnome¡BICEWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"KDE (The K Desktop Environment) ¹Ï§Î¤¶­±Àô¹Ò¡A¥]§t³\¦h¦n¥Îªº¹Ï«¬¤¶­±¤u¨ãµ{¦¡"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "¹Ï§Î¤¶­±Àô¹Ò"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "µ{¦¡¶}µo¥­¥x"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, ProFTPD"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "«Ø¥ß»P¶i¦æ CD ¿N¿ýµ¥¤u¨ã"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "¿ì¤½«Ç³nÅé¤u§@¯¸"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, µ¥µ¥¶µ¥Ø"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "¤ñ¤è¹³¬O gimp ªºÃ¸¹Ï³nÅéµ{¦¡"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS ªA°È"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C/C++ µo®iÀô¹Ò¡A¥]§t½sĶ¾¹¡Bµ{¦¡®w»P¤Î¤@¨Ç¤Þ¤JÀÉ®×"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "ºô¸ô¦øªA¾¹"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "¶l¥ó/¸s²Õ³nÅé/·s»D¸s²Õ"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "¹CÀ¸Àô¹Ò"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "¼v¹³¼·©ñµ{¦¡¥H¤Î½s¿èµ{¦¡"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "¦h´CÅé - ø¹Ï"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "®T¼Öªº¤@¨Çµ{¦¡: arcade, boards, strategy µ¥"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"¥]§tŪ«H¡B¼g«H¥H¤Î¾\Ūºô¸ô½×¾Âªº¤u¨ã (pine, mutt, tin ..) »P¤Î web ÂsÄý¤u¨ã"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "ÀÉ®×¥´¥]µ{¦¡, ¼ÒÀÀ¾¹, ºÊµø³nÅé"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "­Ó¤H²z°]"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "¥]§t¤Íµ½ªºÀ³¥Îµ{¦¡¡B®à­±³nÅ骺¹Ï«¬¤Æ¨Ï¥ÎÀô¹Ò"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "¥]§t ssh µ¥¨ä¥L¤£¦P³q°T¨ó©wªº¥Î¤áºÝµ{¦¡"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "­µ®Ä¥H¤Î¼v¹³¼·©ñ½s¿èµ{¦¡"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "¨ä¥L¹Ï«¬®à­±³nÅé"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "½s¿è¾¹, shell, Àɮפu¨ã, ²×ºÝ¾÷"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "¨ÓºÞ²z±z°]°Èª÷¿úªº¤u¨ã¡A¤ñ¤è¹³¬O gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Games"
-msgstr "¹CÀ¸"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "­Ó¤H¸ê°TºÞ²z"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "¦h´CÅé - CD ¿N¿ý"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "¬ì¾Ç­pºâÀô¹Ò"
diff --git a/perl-install/share/reload.png b/perl-install/share/reload.png
deleted file mode 100644
index 26d503283..000000000
--- a/perl-install/share/reload.png
+++ /dev/null
diff --git a/perl-install/share/rpm-base.png b/perl-install/share/rpm-base.png
deleted file mode 100644
index c74fec0ff..000000000
--- a/perl-install/share/rpm-base.png
+++ /dev/null
diff --git a/perl-install/share/rpm-installed.png b/perl-install/share/rpm-installed.png
deleted file mode 100644
index 10a032fd0..000000000
--- a/perl-install/share/rpm-installed.png
+++ /dev/null
diff --git a/perl-install/share/rpm-selected.png b/perl-install/share/rpm-selected.png
deleted file mode 100644
index 49b225b93..000000000
--- a/perl-install/share/rpm-selected.png
+++ /dev/null
diff --git a/perl-install/share/rpm-semiselected.png b/perl-install/share/rpm-semiselected.png
deleted file mode 100644
index c026805bf..000000000
--- a/perl-install/share/rpm-semiselected.png
+++ /dev/null
diff --git a/perl-install/share/rpm-unselected.png b/perl-install/share/rpm-unselected.png
deleted file mode 100644
index 221acbceb..000000000
--- a/perl-install/share/rpm-unselected.png
+++ /dev/null
diff --git a/perl-install/share/rpmsrate b/perl-install/share/rpmsrate
deleted file mode 100644
index 3d4a545d1..000000000
--- a/perl-install/share/rpmsrate
+++ /dev/null
@@ -1,521 +0,0 @@
-GRAPHICAL_DESKTOP
-  4 WindowMaker icewm
-  3 Epplets WMRack blackbox enlightenment ethemes icepref
-    wmakerconf xlockmore
-  2 wmnet
-  2 GNOME
-  1 lesstif-mwm xbanner xfce
-
-GNOME
-  4 gnome-tiles gnome-users-guide gdm gnome-applets gnome-user-docs gtk-themes sawfish-themes
-    gnome-network gnome-utils xscreensaver mdk-eazel-engine-capplet
-  4 CHARSET"iso-8859-1" || CHARSET"iso-8859-15" nautilus
-  5 !CHARSET"iso-8859-1" !CHARSET"iso-8859-15" gmc
-  3 gnome-pilot
-  2 bug-buddy eog g-print
-  1 sawfish-themer
-
-KDE
-  5 kdebase
-  5 kde-i18n-ca kde-i18n-cs kde-i18n-da kde-i18n-de kde-i18n-el kde-i18n-es kde-i18n-et kde-i18n-fi kde-i18n-fr kde-i18n-he kde-i18n-hu kde-i18n-is kde-i18n-it kde-i18n-ja kde-i18n-ko kde-i18n-nl kde-i18n-no kde-i18n-no_NY kde-i18n-pl kde-i18n-pt kde-i18n-pt_BR kde-i18n-ro kde-i18n-ru kde-i18n-sk kde-i18n-sr kde-i18n-sv kde-i18n-tr kde-i18n-uk kde-i18n-zh_CN.GB2312 kde-i18n-zh_TW.Big5 
-  4 kdeaddutils kdeadmin kdegraphics kdemultimedia kdenetwork krozat
-    kdepim kdetoys kdeutils quanta 
-
-  2 kdesdk kdoc
-
-VIDEO
-  4 powerdvd RealPlayer RealPlayer-rpnp
-  3 nist xanim xmms-smpeg xmovie 
-  2 mtv mtv-fullscreen-extension
-  1 bcast mpeg2_movie
-TV
-  4 xawtv gatos
-  4 KDE kwintv
-
-OFFICE
-  4 staroffice-en staroffice-de staroffice-es staroffice-fr staroffice-it
-    acroread acroread-nppdf
-  4 GNOME abiword 
-  4 cbb gaddr ical xpdf moneydance
-  3 wv 
-  4 LOCALES"zh" pyDict
-  2 units lyx phpgroupware
-  GNOME
-    4 gnome-pim gnome-pim-conduits gnumeric
-    3 dia gnome-pilot-conduits
-    2 ggv gnucash
-  KDE
-    5 koffice
-    5 koffice-i18n-az koffice-i18n-hu koffice-i18n-ro koffice-i18n-cs koffice-i18n-it koffice-i18n-ru koffice-i18n-da 
-      koffice-i18n-ja koffice-i18n-sk koffice-i18n-de koffice-i18n-lt koffice-i18n-sl koffice-i18n-en_GB koffice-i18n-nl 
-      koffice-i18n-sv koffice-i18n-eo koffice-i18n-no koffice-i18n-ta koffice-i18n-es koffice-i18n-no_NY koffice-i18n-tr 
-      koffice-i18n-et koffice-i18n-pl koffice-i18n-fr koffice-i18n-pt
-    2 klyx
-
-SOUND
-  5 sox
-  4 aumix
-  4 KDE xmms-arts
-
-AUDIO
-  4 eMusic grip xmms xmms-skins
-  4 GNOME gnome-audio gnome-media xmms-gnome
-  4 KDE kdelibs-sound
-  4 3D xmms-mesa
-  3 cdp cdparanoia cdrecord-cdda2wav mikmod mp3info mpg123
-    playmidi playmidi-X11 space_sounds timidity-instruments xmms-esd
-    xmms-kjofol-skins xmms-mikmod xmms-more-vis-plugins
-  3 GNOME gnome-audio-extra 
-
-  4 HW"Rio 500" rio500 grio500
-
-  1 viavoicemenu_de viavoicemenu_fr viavoicemenu_us
-  DEVELOPMENT
-    4 ViaVoice_sdk
-
-ACCESSIBILITY
-  2 gtkeyboard
-
-PUBLISHING
-  5 enscript ghostscript-module-X nlpr
-  4 docbook-dtd31-sgml ghostscript-utils gv psutils texinfo
-  3 latex2html jadetex tetex-afm tetex-dvips tetex-latex tetex-xdvi tetex-latex-arab tetex-latex-heb
-  2 BOOKS tetex-doc
-  1 docbook-style-dsssl openjade sgml-tools ghostscript-module-SVGALIB cttex
-  1 BOOKS docbook-style-dsssl-doc
-
-  5 CUPS 
-      cups-drivers xpp
-      KDE kups
-  5 CUPS || LPR foomatic
-  1 CUPS hpoj
-
-SHELLS
-  3 zsh
-  3 BOOKS bash-doc zsh-doc
-  2 eshell pdksh tcsh
-  1 bash1
-
-SCIENCES
-  5 3D openuniverse
-  4 gnuplot gtkgraph
-  3 xlispstat HDF
-  2 mathplot octave
-  1 xoscope
-
-EDITORS
-  5 vim-enhanced
-  4 emacs-X11
-  3 GXedit vim-X11
-  2 nedit cooledit emacs-tramp joe emacs-leim jed-xjed xemacs xemacs-extras xemacs-info yudit
-  1 auctex emacs-el jed xemacs-el emacs-nox xwpe xwpe-X11
-  GNOME
-    4 gedit
-
-TEXT_TOOLS
-  5 words
-  4 groff patch recode rgrep
-  4 ispell-af ispell-br ispell-ca ispell-cs ispell-da ispell-de ispell-el ispell-en ispell-eo ispell-es ispell-fi ispell-fr ispell-ga ispell-gd ispell-gv ispell-id ispell-it ispell-nl ispell-no ispell-pl ispell-pt ispell-pt_BR ispell-ro ispell-ru ispell-sk ispell-sl ispell-sv
-  3 ed
-  2 groff-gxditview lout
-  BOOKS
-    3 gawk-doc
-    1 lout-doc
-
-COMMUNICATIONS
-  4 efax
-  3 dip jpilot pilot-link
-  2 hylafax-server hylafax-client
-  2 lrzsz mgetty mgetty-contrib mgetty-sendfax mgetty-viewfax mgetty-voice minicom
-  1 jpilot-Mail jpilot-syncmal statserial tkbabel
-
-TERMINALS
-  5 open xterm
-  4 screen kon2
-  3 Eterm vlock
-  1 aterm x3270
-
-  4 KDE ktelnet
-  4 GNOME gnome-telnet
-  4 LOCALES"ja" kterm 
-
-NETWORKING_CHAT
-  3 talk ytalk
-NETWORKING_CHAT_SERVER
-  4 jabber 
-  3 talk-server
-    
-NETWORKING_FILE_TRANSFER
-  5 lftp mirrordir rsync uucp
-  4 gftp rdist
-  3 fmirror ncftp tftp
-  3 GNOME dpsftp
-NETWORKING_FILE_TRANSFER_SERVER
-  4 proftpd
-  2 wu-ftpd anonftp
-
-NETWORKING_INSTANT_MESSAGING
-  4 licq
-  3 everybuddy licq-autoreply licq-console licq-forwarder licq-rms licq-update-hosts
-  GNOME
-    4 gnomeicu gabber gaim
-    3 gtk+licq
-
-NETWORKING_IRC
-  4 KDE kvirc
-  3 BitchX mozilla-irc
-  3 GNOME xchat
-  2 irssi
-  1 eggdrop
-
-NETWORKING_FIREWALLING_SERVER
-  5 iproute2 routed iptables ipchains
-  3 prelude
-  1 portsentry 
-
-NETWORKING_MAIL
-  5 mailx metamail
-  4 GNOME evolution
-  4 faces mozilla-mail
-  3 fetchmail urlview sylpheed
-  3 !GNOME !KDE xmailbox
-  2 FaxMail comsat elm faces-xface
-  1 exmh mutt fetchmail-daemon fetchmailconf pine
-NETWORKING_MAIL_SERVER
-  5 postfix 
-  4 sympa 
-
-NETWORKING_NEWS
-  5 GNOME pan
-  3 slrn tin trn 
-  1 slrn-pull xrn
-NETWORKING_NEWS_SERVER
-  4 inn
-  3 inews 
-
-NETWORKING_OTHER
-  3 finger fwhois ucd-snmp-utils
-  2 htdig macutils queso
-NETWORKING_OTHER_SERVER
-  3 dhcp gated timed xntp3 
-
-  3 intimed mcserv nscd imap pidentd
-    rdate bootparamd 
-    cleanfeed ucd-snmp leafnode
-    cvsweb finger-server mars-nwe 
-    XFree86-Xvfb XFree86-Xnest
-  2 heartbeat diald
-
-NIS
-  5 ypbind
-NIS_SERVER
-  5 ypserv
-
-NETWORKING_REMOTE_ACCESS
-  5 openssh-clients telnet telnet-client-krb5
-  4 traceroute
-  3 vnc
-  2 rsh vnc-SVGALIB vnc-java
-  2 BOOKS vnc-doc
-  1 sftp
-NETWORKING_REMOTE_ACCESS_SERVER
-  5 openssh-server
-  2 vnc-server
-  1 telnet-server-krb5 rsh-server
-
-NETWORKING_DNS
-  4 bind-utils 
-NETWORKING_DNS_SERVER
-  5 bind 
-  4 caching-nameserver
-  1 nslint
-
-NETWORKING_FILE
-  4 samba-client nfs-utils-clients
-  2 arkeia-gui arkeia-client
-  2 GNOME gnomba gtm
-  1 am-utils autofs
-NETWORKING_FILE_SERVER 
-  5 nfs-utils
-  4 samba 
-  2 arkeia-server-shareware
-  3 squid squidGuard
-
-NETWORKING_WWW
-  5 lynx
-  4 netscape-communicator wget links mozilla mozilla-psm netscape-plugins
-  4 GNOME 
-      screem galeon 
-      CHARSET"iso-8859-1" || CHARSET"iso-8859-15" nautilus-mozilla
-  3 plugger opera bluefish
-  4 netscape-castellano netscape-catalan netscape-chinese_gb2312 netscape-chinese_big5 netscape-euskara netscape-francais netscape-german netscape-japanese netscape-polish netscape-russian netscape-walon
-NETWORKING_WWW_SERVER
-  5 apache apache-mod_perl mod_ssl
-  4 apache-suexec 
-  4 BOOKS apache-manual
-  3 php-dba_gdbm_db2 php-gd php-imap php-ldap php-manual php-mysql php-oracle
-    php-pgsql php-readline php mod_php mod_ssl-sxnet auth_ldap HTML-Embperl PHP-nuke
-  1 Zope Zope-core Zope-pcgi Zope-zserver
-
-GRAPHICS
-  4 blender
-  4 ImageMagick giftrans gimp gphoto gphoto2 qiv xli ac3d
-  3 gimp-data-extras gqview sketch xloadimage xpcd xwpick
-  2 gif2png gimp-perl xfig xpcd-gimp gd-utils cameleo VariCAD VariCAD_de VariCAD_it VariCAD_es 
-  1 libgr-progs libungif-progs qcad transfig zgv xpaint xmorph
-  1 3D Mesa-demos
-  GNOME
-    4 gnome-iconedit
-    3 ee
-
-ARCHIVING
-  5 dump ncompress sharutils unzip mt-st
-  4 gtkzip
-  3 unarj unstuff
-  2 zip taper
-  1 lha
-  GNOME
-    4 gnozip
-    3 gtktalog
-
-BURNER
-  4 GNOME gnome-toaster gcombust
-  4 X xcdroast
-  3 mkisofs cdrecord
-  2 X eroaster 
-  DEVELOPMENT
-    3 cdrecord-devel
-
-SCANNER
-  5 sane-frontends
-  4 gimp
-  2 xsane
-
-PHOTO
-  4 gphoto
-  3 gnomemeeting openmcu
-
-DATABASES
-  5 postgresql
-  3 MySQL-client MySQL-shared
-  DATABASES_SERVER
-    4 postgresql-server
-    3 MySQL
-    3 postgresql-perl postgresql-python
-    2 postgresql-jdbc postgresql-tk postgresql-odbc postgresql-tcl postgresql-test
-  DEVELOPMENT 
-    4 perl-Mysql
-    3 postgresql-devel
-    1 MySQL-bench MySQL-devel
-
-GAMES
-  4 sin-demo
-  4 clanbomber freeciv mures methane
-  3 shogo-demo
-  3 cxhextris xboard xgammon xkobo xpat2 xpuzzles xsoldier xfishtank nethack_falconseye rocksndiamonds trophy
-  2 Maelstrom lbreakout pingus ltris penguin-command pysol xtrojka bunnies powermanga xpilot xplanet
-  1 7colors xrally fortune-mod nil
-  GNOME
-    4 gnome-chess gnome-games
-    2 3D gtulpas
-    1 gtkgo
-    DEVELOPMENT
-      2 gnomes-games-devel
-  KDE
-    4 kdegames
-    DEVELOPMENT
-      2 kdegames-devel
-  3D
-    4 csmash armagetron
-      !HW"Riva.*128" chromium tuxracer
-
-    3 !HW"Riva.*128" !HW"Rage X[CL]" !HW"Rage Mobility (?:P\/M|L) " !HW"3D Rage (?:LT|Pro)" # XF3 3D
-        bzflag
-    3 FlightGear spacecup gltron
-
-DEVELOPMENT
-  5 autoconf automake m4 make 
-  1 tmake pmake pmake-customs
-
-  5 libtool binutils ltrace gdb gcc
-  2 gperf cdecl cproto indent ElectricFence
-  1 egcs glibc-profile xxgdb
-
-  4 gcc-c++ libstdc++-devel
-  2 libsigc++-examples
-  1 egcs-c++ 
-
-  3 bison flex
-  2 byacc
-
-  2 doxygen C++2LaTeX
-
-  3 jikes kaffe
-  1 gcc-java gcc3.0 gcc3.0-g77
-
-  5 cvs rcs
-  2 diffstat tkcvs
-
-  3 swig
-
-  4 python veepee tkinter
-  3 python-devel python-imaging pygtk-glarea pygtk pygtk-libglade rpm-python
-
-  4 perl perl-Term-Readline-Gnu perl-libnet perl-libwww-perl perl-devel
-  3 perl-DBI perl-Digest-MD5 perl-IO-stringy perl-PDL perl-Parse-RecDescent 
-    perl-GTK-GLArea perl-Tk perlftlib eperl perl-URI perl-DB_File
-    perl-Data-ShowTable perl-HTML-Parser perl-HTML-SimpleParse perl-MIME-Base64
-    perl-MIME-tools perl-MP3-Info perl-MailTools perl-Msgcat
-
-  4 rpm-build
-  3 rpmlint rpm-devel
-  3 kernel-source
-
-  2 gcc-g77 nasm dev86 
-  1 egcs-g77 egcs-objc gcc-objc gcc-chill
-
-  2 teyjus gprolog ocaml umb-scheme mawk guile clisp SmallEiffel p2c 
-    ghc ghc-prof happy haskell-GTK haskell-GTK-devel hugs98 mercury swi-prolog 
-    ruby-extensions ruby-gtk ruby 
-
-  4 gettext-devel
-
-  BOOKS
-    2 pam-doc python-docs slang-doc kernel-doc nasm-doc qt2-doc ruby-doc lkmpg
-
-  KDE
-    4 kdevelop
-    3 kdebase-devel kdegraphics-devel kdelibs-devel kdelibs-sound-devel
-      kdemultimedia-devel kdenetwork-devel
-    1 kdesupport-devel kdeaddutils-devel koffice-devel
-
-  GNOME
-    4 perl-GTK-Glade perl-GTK-Gnome 
-    3 memprof glade gnome-guile pygnome gnome-core-devel gnome-guile-devel
-      gnome-objc-devel gnome-pim-devel gob 
-    2 pygnome-applet pygnome-capplet pygnome-libglade rep-gtk-gnome
-      gnomemm-devel gnome-pilot-devel glademm
-    1 gnucash-devel rep-gtk-libglade
-
-  DEVELOPMENT_OTHER
-    2 ImageMagick-devel Mesa-common-devel Xaw3d-devel detect-devel
-      gd-devel p2c-devel gmp-devel guile-devel libgr-devel libjpeg-devel libpng-devel
-      libtermcap-devel libtiff-devel libungif-devel libxml-devel libxml2-devel
-      linuxconf-devel slang-devel sox-devel zlib-devel XFree86-devel dev86-devel
-      gdk-pixbuf-devel gimp-devel gpm-devel kudzu-devel libghttp-devel libgtop-devel
-      libmikmod-devel librep-devel libunicode-devel popt-devel pwdb-devel t1lib-devel
-      ucd-snmp-devel mpeg_lib-devel WindowMaker-devel aalib-devel adns-devel
-      alsa-lib-devel audiofile-devel cups-devel e2fsprogs-devel egcs-objc-devel
-      g-wrap-devel gkrellm-devel ibtk libPropList-devel licq-devel openldap-devel
-      parted-devel pciutils-devel pilot-link-devel svgalib-devel
-      recode-devel aspell-devel cracklib-devel faces-devel fnlib-devel
-      freetype-devel gtk+mdk-devel gtkglarea-devel XFree86-static-libs imap-devel
-      php-devel pth-devel sane-devel swig-devel xdelta-devel isapnptools-devel
-      pango-devel readline-devel
-
-MONITORING
-  5 procinfo psacct
-  5 PCMCIA apmd
-  4 lsof swatch tcpdump traceroute
-  3 iplog arpwatch lslk nmap nmap-frontend procps-X11 xcpustate xosview xsysinfo xtraceroute
-  2 cfengine gkrellm gps rusers mon
-  1 logcheck bonnie
-  GNOME
-    4 gtop
-
-FILE_TOOLS
-  5 file gnupg mkxauth mtools slocate
-  4 symlinks
-  3 FileRunner dosfstools draksync mc tree
-  2 git gentoo sfm xwc
-  1 xdelta
-
-CONFIG
-  4 userdrake linuxconf
-  4 GNOME gnome-linuxconf
-  3 webmin Bastille-Curses-module
-  3 ipvsadm quota timetool usernet
-  2 gfcc control-panel adjtimex isicom xinput timeconfig Bastille-Tk-module
-  1 ipxutils
-
-BOOKS
-  4 mandrake_doc-de mandrake_doc-en mandrake_doc-es mandrake_doc-fr mandrake_doc-it
-
-X
-  5 XFree86 rxvt XFree86-75dpi-fonts 
-  5 !GNOME !KDE icewm-light
-
-  4 gurpmi rpmdrake drakconf fonts-ttf-decoratives harddrake fonts-ttf-west_european
-    menudrake drakfloppy drakfont mandrake_desk mdkonline drakfirsttime mdk-eazel-engine
-  4 !LOCALES"ru" Aurora-Monitor-NewStyle-Categorizing-WsLib
-  4 LOCALES"ja" || LOCALES"ko" || LOCALES"zh" rxvt-CJK 
-
-  3 XFree86-100dpi-fonts draksync drakprofile
-  2 LOCALES"ja" || LOCALES"ko" || LOCALES"zh" jmcce 
-  2 tksysv imlib-cfgeditor
-    Aurora-Monitor-NewStyle-WsLib Aurora-Monitor-Traditional-Gtk+
-    Aurora-Monitor-Traditional-WsLib
-  1 DrakeLogo drakprofile Mesa xtoolwait usbview X11R6-contrib 
-
-  GNOME
-    3 gnome-print gnorpm
-
-  5 xcin Chinput xa+cv xvnkb FreeWnn ami
-  5 GNOME ami-gnome
-  2 app-defaults-be app-defaults-cs app-defaults-ga app-defaults-ru app-defaults-th app-defaults-uk
-
-  5 CHARSET"iso-8859-13" fonts-type1-baltic
-    LOCALES"ru" || LOCALES"uk" XFree86-cyrillic-fonts
-    LOCALES"he" fonts-hebrew-elmar
-    LOCALES"hy" fonts-ttf-armenian
-    LOCALES"ja" fonts-ttf-japanese
-    LOCALES"ko" fonts-ttf-korean
-    LOCALES"th" fonts-ttf-thai
-    LOCALES"zh_CN" || LOCALES"zh" fonts-ttf-gb2312
-    LOCALES"zh_TW" || LOCALES"zh" taipeifonts fonts-ttf-big5
-
-SYSTEM
-  5 at MAKEDEV anacron eject kudzu ldetect
-    linux_logo locales man-pages iputils 
-    urpmi cpio
-
-  5 HIGH_SECURITY libsafe kernel22-secure
-
-  4 sndconfig ftp ftp-client-krb5 gpm hexedit strace mandrake-mime
-
-  3 bc
-  2 kernel-utils sane acpid adns audiofile freeswan awesfx fbset sudo vlan-utils
-  1 fdutils genromfs mailcap pinfo
-
-  BOOKS 
-    5 man-pages-cs man-pages-de man-pages-es man-pages-fr man-pages-hu man-pages-id man-pages-ja man-pages-ko man-pages-pl man-pages-ru man-pages-zh
-    4 grub-doc lilo-doc
-      howto-html-de howto-html-el howto-html-en howto-html-es howto-html-fr howto-html-hr howto-html-hu howto-html-id howto-html-it howto-html-ja howto-html-ko howto-html-pl howto-html-ro howto-html-sl howto-html-sv howto-html-zh
-
-  4 NIS yp-tools
-  3 PCMCIA irda-utils
-
-  4 LOCALES"ar" || LOCALES"fa" || LOCALES"he" || LOCALES"yi" acon
-  3 LOCALES"zh" zh-autoconvert
-
-EMULATORS
-  3 wine
-  2 BasiliskII BasiliskII-sheepnet xdosemu 
-  1 xmame xmess
-
-INSTALL
-  5 pptp-adsl dhcpcd dhcpxd dhcp-client isdn4net isdn-light isdn4k-utils ibod rp-pppoe pump wireless-tools speedtouch
-  5 XFree86-SVGA XFree86-server hotplug
-  4 XFree86-S3 XFree86-S3V XFree86-VGA16 XFree86-Mach64 XFree86-FBDev
-  3 XFree86-3DLabs
-  1 XFree86-8514 XFree86-AGX XFree86-I128 XFree86-Mach32 XFree86-Mach8 XFree86-Mono XFree86-P9000 XFree86-W32
-    XFree86 XFree86-glide-module Device3Dfx Glide_V3-DRI Glide_V5 Mesa
-    XFree86-3DLabs XFree86-FBDev
-    kernel kernel-smp kernel-enterprise kernel22 kernel22-smp kernel22-secure 
-    autologin ntp cups-drivers lpr samba ncpfs ghostscript-utils
-    reiserfsprogs jfsprogs xfsprogs ipchains printer-utils rlpr samba-client ncpfs nc
-    xpp LPRng pdq kups printer-testpages 
-    autologin ntp ipchains lvm
-    cups LPRng lpr pdq foomatic printer-utils printer-testpages gimpprint xpp 
-    qtcups kups cups-drivers rlpr samba samba-common samba-client ncpfs nc 
-    ImageMagick ghostscript printer-filters mpage libgimpprint4 numlock
diff --git a/perl-install/share/step-green-click.xpm b/perl-install/share/step-green-click.xpm
deleted file mode 100644
index 99c8e1c71..000000000
--- a/perl-install/share/step-green-click.xpm
+++ /dev/null
@@ -1,174 +0,0 @@
-/* XPM */
-static char * step_green_click_xpm[] = {
-"21 21 150 2",
-"  	c None",
-". 	c #525266",
-"+ 	c #58586E",
-"@ 	c #6D6D89",
-"# 	c #767693",
-"$ 	c #6E6E89",
-"% 	c #5F5F76",
-"& 	c #535368",
-"* 	c #55556A",
-"= 	c #72728E",
-"- 	c #9F9FC7",
-"; 	c #B6B6E4",
-"> 	c #C0C0F1",
-", 	c #C4C4F5",
-"' 	c #BFBFEE",
-") 	c #B1B1DD",
-"! 	c #9A9AC1",
-"~ 	c #7F7F9F",
-"{ 	c #737390",
-"] 	c #8F8FB2",
-"^ 	c #B9B9E7",
-"/ 	c #C8C8FA",
-"( 	c #CCCCFF",
-"_ 	c #C0C5E9",
-": 	c #A2BAAC",
-"< 	c #C3CAEC",
-"[ 	c #C6C6F7",
-"} 	c #B5B5E2",
-"| 	c #9090B4",
-"1 	c #BEBEED",
-"2 	c #CACAFD",
-"3 	c #CBCCFE",
-"4 	c #8A9E94",
-"5 	c #70A64A",
-"6 	c #C0CBE3",
-"7 	c #CBCBFE",
-"8 	c #C8C8F9",
-"9 	c #BBBBE9",
-"0 	c #ABABD5",
-"a 	c #A7A7D1",
-"b 	c #7B7B9A",
-"c 	c #BABAE9",
-"d 	c #C0C5EB",
-"e 	c #C6C8F5",
-"f 	c #CACBFC",
-"g 	c #B1B7D4",
-"h 	c #446C24",
-"i 	c #61AB1E",
-"j 	c #C0CCE1",
-"k 	c #C2C2F2",
-"l 	c #BCBCEB",
-"m 	c #59596F",
-"n 	c #467320",
-"o 	c #708A6C",
-"p 	c #8F9E9F",
-"q 	c #5B784F",
-"r 	c #3A7400",
-"s 	c #57AD01",
-"t 	c #B2C6C5",
-"u 	c #CCCCFE",
-"v 	c #CDCDFF",
-"w 	c #757592",
-"x 	c #75A654",
-"y 	c #468C00",
-"z 	c #3F7F00",
-"A 	c #408100",
-"B 	c #50A000",
-"C 	c #59B300",
-"D 	c #70AA44",
-"E 	c #99B1A0",
-"F 	c #AABCBE",
-"G 	c #BBC8DA",
-"H 	c #D1D1FF",
-"I 	c #8B8BAD",
-"J 	c #C4CAEF",
-"K 	c #73AC48",
-"L 	c #56AB00",
-"M 	c #5CB800",
-"N 	c #62C400",
-"O 	c #68CD03",
-"P 	c #6ACD06",
-"Q 	c #6BCE09",
-"R 	c #7BD128",
-"S 	c #AAD0A1",
-"T 	c #D4D4FF",
-"U 	c #D6D6FF",
-"V 	c #5B5B71",
-"W 	c #C9C9FC",
-"X 	c #96AF9C",
-"Y 	c #54A800",
-"Z 	c #67CC01",
-"` 	c #73D015",
-" .	c #89D83A",
-"..	c #A8E26F",
-"+.	c #BDDFAA",
-"@.	c #C3D6CE",
-"#.	c #C8CEF0",
-"$.	c #CFCFFF",
-"%.	c #D9D9FF",
-"&.	c #DADAFF",
-"*.	c #686881",
-"=.	c #9C9CC3",
-"-.	c #609438",
-";.	c #87D737",
-">.	c #88D739",
-",.	c #9CDE5A",
-"'.	c #BADCA9",
-").	c #CACFF3",
-"!.	c #DDDDFF",
-"~.	c #DEDEFF",
-"{.	c #9898BD",
-"].	c #C6C6F8",
-"^.	c #91B587",
-"/.	c #70CF10",
-"(.	c #AEDC8A",
-"_.	c #B7D8AC",
-":.	c #9AD961",
-"<.	c #A1E063",
-"[.	c #B7D6B2",
-"}.	c #CBCCFC",
-"|.	c #E1E1FF",
-"1.	c #9A9AC0",
-"2.	c #9DCE84",
-"3.	c #BDD3C8",
-"4.	c #C9CFF0",
-"5.	c #CACDF9",
-"6.	c #BDCFD3",
-"7.	c #A0DE66",
-"8.	c #B4DA9F",
-"9.	c #C9CDF7",
-"0.	c #DFDFFF",
-"a.	c #E6E6FF",
-"b.	c #A2A2CA",
-"c.	c #CECEFF",
-"d.	c #C8CCF4",
-"e.	c #B9D2C1",
-"f.	c #BAD9B1",
-"g.	c #CACEF6",
-"h.	c #D0D0FF",
-"i.	c #DCDCFF",
-"j.	c #E8E8FF",
-"k.	c #E9E9FF",
-"l.	c #D2D2FF",
-"m.	c #EDEDFF",
-"n.	c #D3D3FF",
-"o.	c #E2E2FF",
-"p.	c #EBEBFF",
-"q.	c #EFEFFF",
-"r.	c #F0F0FF",
-"s.	c #E3E3FF",
-"                                          ",
-"              . . . . . .                 ",
-"          . . . + @ # $ % & *             ",
-"        . . = - ; > , ' ) ! ~ {           ",
-"      . . ] ^ / ( ( _ : < [ } ! |         ",
-"    . . | 1 2 ( ( 3 4 5 6 7 8 9 0 a       ",
-"    . b c 2 d e f g h i j ( 7 8 k l       ",
-"  . m a / ( n o p q r s t u ( 7 ( v v     ",
-"  . w c ( ( x y z A B C D E F G v H H     ",
-"  . I , ( ( J K L M N O P Q R S v T U     ",
-"  V ! W ( ( ( X Y Z `  ...+.@.#.$.%.&.    ",
-"  *.=.W ( ( d -.Z ;.>.,.'.).( ( H !.~.    ",
-"  w {.].( ( ^./.(._.:.<.[.}.( v U |.|.    ",
-"    1., v ( 2.3.4.5.6.7.8.9.v H 0.a.      ",
-"    b.' c.v d.u ( ( u e.f.g.h.i.j.k.      ",
-"      > $.h.c.( ( ( ( ( v l.i.j.m.        ",
-"        H U U n.h.c.$.l.%.o.p.q.          ",
-"          %.!.0.0.0.o.a.p.q.r.            ",
-"              s.a.k.p.m.q.                ",
-"                                          ",
-"                                          "};
diff --git a/perl-install/share/step-green-on.xpm b/perl-install/share/step-green-on.xpm
deleted file mode 100644
index 82ad1cf95..000000000
--- a/perl-install/share/step-green-on.xpm
+++ /dev/null
@@ -1,198 +0,0 @@
-/* XPM */
-static char * step_green_on_xpm[] = {
-"21 21 174 2",
-"  	c None",
-". 	c #EFEFFF",
-"+ 	c #EDEDFF",
-"@ 	c #EBEBFF",
-"# 	c #E9E9FF",
-"$ 	c #E6E6FF",
-"% 	c #E3E3FF",
-"& 	c #F0F0FF",
-"* 	c #E2E2FF",
-"= 	c #DFDFFF",
-"- 	c #DDDDFF",
-"; 	c #D9D9FF",
-"> 	c #D2D2FF",
-", 	c #CFCFFF",
-"' 	c #C7D5DC",
-") 	c #A9D888",
-"! 	c #BAD2C5",
-"~ 	c #D6D6FF",
-"{ 	c #D1D1FF",
-"] 	c #E8E8FF",
-"^ 	c #DCDCFF",
-"/ 	c #CDCDFF",
-"( 	c #CCCCFF",
-"_ 	c #CACEF3",
-": 	c #BCE0A6",
-"< 	c #83D239",
-"[ 	c #B0C3C4",
-"} 	c #CECEFF",
-"| 	c #D0D0FF",
-"1 	c #C0C0F1",
-"2 	c #D5DDEB",
-"3 	c #CED1F8",
-"4 	c #C4D9C9",
-"5 	c #ABE373",
-"6 	c #6AC315",
-"7 	c #A5BBB4",
-"8 	c #BFBFEE",
-"9 	c #A2A2CA",
-"0 	c #B7E099",
-"a 	c #BCDCAE",
-"b 	c #BED7C2",
-"c 	c #C6D4DB",
-"d 	c #C8D8D5",
-"e 	c #BAE496",
-"f 	c #97DC52",
-"g 	c #62BE06",
-"h 	c #97BB91",
-"i 	c #C4C4F5",
-"j 	c #9A9AC0",
-"k 	c #E1E1FF",
-"l 	c #95D267",
-"m 	c #90DA46",
-"n 	c #9FDE62",
-"o 	c #ADE180",
-"p 	c #AFE27F",
-"q 	c #9DDE5B",
-"r 	c #7FD42A",
-"s 	c #66CB00",
-"t 	c #7FC942",
-"u 	c #B9CECD",
-"v 	c #C8CDF3",
-"w 	c #CCCCFE",
-"x 	c #C6C6F8",
-"y 	c #9898BD",
-"z 	c #757592",
-"A 	c #DEDEFF",
-"B 	c #BEC9E0",
-"C 	c #76BB3E",
-"D 	c #68CD03",
-"E 	c #7CD325",
-"F 	c #81D52D",
-"G 	c #78D21E",
-"H 	c #6DCE0C",
-"I 	c #6CCE0A",
-"J 	c #76D11B",
-"K 	c #92D556",
-"L 	c #A8D68C",
-"M 	c #AAD399",
-"N 	c #A5CB9D",
-"O 	c #9C9CC3",
-"P 	c #686881",
-"Q 	c #DADAFF",
-"R 	c #B7C9CE",
-"S 	c #78C634",
-"T 	c #6ACD06",
-"U 	c #67CC01",
-"V 	c #63C600",
-"W 	c #60C000",
-"X 	c #5AB400",
-"Y 	c #4F9D00",
-"Z 	c #6C9E48",
-"` 	c #9A9AC1",
-" .	c #5B5B71",
-"..	c #D4D4FF",
-"+.	c #A4D28B",
-"@.	c #7DD427",
-"#.	c #66CC00",
-"$.	c #65CA00",
-"%.	c #5DBB00",
-"&.	c #4A9400",
-"*.	c #366A04",
-"=.	c #486931",
-"-.	c #7E9285",
-";.	c #ACB4CD",
-">.	c #8B8BAD",
-",.	c #525266",
-"'.	c #C8CEEF",
-").	c #AADB86",
-"!.	c #83D631",
-"~.	c #62C400",
-"{.	c #56AB00",
-"].	c #40760C",
-"^.	c #778C7A",
-"/.	c #B4BADA",
-"(.	c #CBCCFE",
-"_.	c #BABAE9",
-":.	c #CBCBFE",
-"<.	c #BAD7B7",
-"[.	c #8CD93F",
-"}.	c #56AD00",
-"|.	c #438600",
-"1.	c #51A200",
-"2.	c #50802A",
-"3.	c #B1B9D3",
-"4.	c #C8C8FA",
-"5.	c #A7A7D1",
-"6.	c #59596F",
-"7.	c #BCBCEB",
-"8.	c #C2C2F2",
-"9.	c #BCCCD2",
-"0.	c #81D137",
-"a.	c #4F950C",
-"b.	c #46682D",
-"c.	c #718871",
-"d.	c #73926A",
-"e.	c #4E920E",
-"f.	c #4E9B00",
-"g.	c #558A2A",
-"h.	c #B2BDD0",
-"i.	c #CACAFD",
-"j.	c #7B7B9A",
-"k.	c #ABABD5",
-"l.	c #90BF7A",
-"m.	c #679B3E",
-"n.	c #8E9F9E",
-"o.	c #B3B9D8",
-"p.	c #C9CAF9",
-"q.	c #90AF8F",
-"r.	c #4E940B",
-"s.	c #4E861C",
-"t.	c #ABBAC5",
-"u.	c #BEBEED",
-"v.	c #9090B4",
-"w.	c #909CA6",
-"x.	c #AAB0CE",
-"y.	c #C6C6F7",
-"z.	c #CACBFB",
-"A.	c #87AB7D",
-"B.	c #437814",
-"C.	c #8CA196",
-"D.	c #8F8FB2",
-"E.	c #737390",
-"F.	c #7F7F9F",
-"G.	c #B1B1DD",
-"H.	c #AFB4D6",
-"I.	c #7A907D",
-"J.	c #66736D",
-"K.	c #55556A",
-"L.	c #535368",
-"M.	c #5F5F76",
-"N.	c #6E6E89",
-"O.	c #767693",
-"P.	c #6D6D89",
-"Q.	c #58586E",
-"                                          ",
-"              . + @ # $ %                 ",
-"          & . @ $ * = = = - ;             ",
-"        . @ * ; > , ' ) ! ~ ~ {           ",
-"      + ] ^ > / ( _ : < [ } | , 1         ",
-"    # ] 2 3 / ( ( 4 5 6 7 ( / } 8 9       ",
-"    $ = 0 a b c d e f g h ( ( / i j       ",
-"  k k ~ l m n o p q r s t u v w x y z     ",
-"  A - { B C D E F G H I J K L M N O P     ",
-"  Q ; , ( R S T T D U s V W X Y Z `  .    ",
-"  ~ ../ ( ( +.@.I #.$.%.&.*.=.-.;.>.,.    ",
-"  { { / ( '.).!.V W ~.{.].^./.(._.z ,.    ",
-"  / / ( :.<.[.}.|.&.}.1.2.3.( 4.5.6.,.    ",
-"    7.8.9.0.a.b.c.d.e.f.g.h.i._.j.,.      ",
-"    5.k.l.m.n.o.( p.q.r.s.t.u.v.,.,.      ",
-"      v.w.x.y.:.( ( z.A.B.C.D.,.,.        ",
-"        E.F.` G.8 i 1 H.I.J.,.,.          ",
-"          K.L.M.N.O.P.Q.,.,.,.            ",
-"              ,.,.,.,.,.,.                ",
-"                                          ",
-"                                          "};
diff --git a/perl-install/share/step-green.xpm b/perl-install/share/step-green.xpm
deleted file mode 100644
index bebc6e378..000000000
--- a/perl-install/share/step-green.xpm
+++ /dev/null
@@ -1,211 +0,0 @@
-/* XPM */
-static char * step_green_xpm[] = {
-"21 21 187 2",
-"  	c None",
-". 	c #DFDFEF",
-"+ 	c #DBDBED",
-"@ 	c #D8D8EB",
-"# 	c #D3D3E9",
-"$ 	c #CDCDE6",
-"% 	c #C8C8E3",
-"& 	c #E1E1F0",
-"* 	c #D7D7EB",
-"= 	c #CECEE6",
-"- 	c #C5C5E2",
-"; 	c #C0C0DF",
-"> 	c #BFBFDF",
-", 	c #BBBBDD",
-"' 	c #B3B3D9",
-") 	c #C6C6E2",
-"! 	c #B2B2D9",
-"~ 	c #A5A5D2",
-"{ 	c #9F9FCF",
-"] 	c #A4B2B9",
-"^ 	c #9AC979",
-"/ 	c #98B0A3",
-"( 	c #ACACD6",
-"_ 	c #A4A4D1",
-": 	c #DADAED",
-"< 	c #D2D2E8",
-"[ 	c #BABADC",
-"} 	c #A4A4D2",
-"| 	c #9B9BCD",
-"1 	c #9999CC",
-"2 	c #9CA0C5",
-"3 	c #AED298",
-"4 	c #7FCE34",
-"5 	c #899C9D",
-"6 	c #9D9DCE",
-"7 	c #A2A2D0",
-"8 	c #9090C0",
-"9 	c #D4D4E9",
-"0 	c #D1D1E8",
-"a 	c #B7BFCD",
-"b 	c #A1A4CB",
-"c 	c #9A9ACD",
-"d 	c #A9BEAF",
-"e 	c #ABE373",
-"f 	c #66BF11",
-"g 	c #819790",
-"h 	c #9E9ECE",
-"i 	c #8F8FBF",
-"j 	c #7979A2",
-"k 	c #ACD58E",
-"l 	c #A9C99C",
-"m 	c #A2BBA6",
-"n 	c #A2B0B7",
-"o 	c #A9B9B7",
-"p 	c #B4DE90",
-"q 	c #97DC52",
-"r 	c #60BD05",
-"s 	c #7A9E74",
-"t 	c #9393C4",
-"u 	c #73739A",
-"v 	c #C3C3E1",
-"w 	c #ADADD6",
-"x 	c #87C459",
-"y 	c #90DA46",
-"z 	c #9EDD61",
-"A 	c #A8DC7B",
-"B 	c #ACDF7C",
-"C 	c #9DDE5B",
-"D 	c #7FD42A",
-"E 	c #66CB00",
-"F 	c #72BC35",
-"G 	c #92A6A5",
-"H 	c #999DC4",
-"I 	c #9595C6",
-"J 	c #727298",
-"K 	c #585875",
-"L 	c #BCBCDE",
-"M 	c #919CB3",
-"N 	c #6AAF32",
-"O 	c #68CD03",
-"P 	c #7CD325",
-"Q 	c #81D52D",
-"R 	c #78D21E",
-"S 	c #6DCE0C",
-"T 	c #6CCE0A",
-"U 	c #75D11A",
-"V 	c #8ACD4E",
-"W 	c #96C57A",
-"X 	c #92BB81",
-"Y 	c #87AD7F",
-"Z 	c #75759C",
-"` 	c #4E4E68",
-" .	c #B5B5DA",
-"..	c #9E9ECF",
-"+.	c #8D9FA5",
-"@.	c #6DBB2A",
-"#.	c #6ACD06",
-"$.	c #67CC01",
-"%.	c #63C600",
-"&.	c #60C000",
-"*.	c #5AB400",
-"=.	c #4F9D00",
-"-.	c #5D903A",
-";.	c #74749A",
-">.	c #44445B",
-",.	c #A9A9D4",
-"'.	c #8EBC75",
-").	c #7DD427",
-"!.	c #66CC00",
-"~.	c #65CA00",
-"{.	c #5DBB00",
-"].	c #4A9400",
-"^.	c #366903",
-"/.	c #3F6027",
-"(.	c #63776A",
-"_.	c #838BA4",
-":.	c #68688B",
-"<.	c #3E3E52",
-"[.	c #A3A3D1",
-"}.	c #9AA1C1",
-"|.	c #9ECF7A",
-"1.	c #83D631",
-"2.	c #62C400",
-"3.	c #56AB00",
-"4.	c #3E740A",
-"5.	c #5F7462",
-"6.	c #898FAE",
-"7.	c #9999CB",
-"8.	c #8C8CBA",
-"9.	c #9C9CCD",
-"0.	c #A0BD9D",
-"a.	c #8CD93F",
-"b.	c #56AD00",
-"c.	c #438600",
-"d.	c #51A200",
-"e.	c #487822",
-"f.	c #878FA9",
-"g.	c #9696C8",
-"h.	c #7D7DA7",
-"i.	c #434359",
-"j.	c #8D8DBC",
-"k.	c #9191C2",
-"l.	c #95A5AC",
-"m.	c #7CCC32",
-"n.	c #4D920A",
-"o.	c #3D5F24",
-"p.	c #5B715A",
-"q.	c #5E7C55",
-"r.	c #4C900B",
-"s.	c #4E9B00",
-"t.	c #4D8222",
-"u.	c #8893A6",
-"v.	c #9898CA",
-"w.	c #5D5D7B",
-"x.	c #8080AB",
-"y.	c #78A762",
-"z.	c #5A8F32",
-"A.	c #6F7F7F",
-"B.	c #888EAD",
-"C.	c #9798C7",
-"D.	c #749272",
-"E.	c #4B9109",
-"F.	c #488016",
-"G.	c #84939E",
-"H.	c #8E8EBE",
-"I.	c #6C6C90",
-"J.	c #6F7B84",
-"K.	c #8287A5",
-"L.	c #9494C6",
-"M.	c #9899C9",
-"N.	c #6E9264",
-"O.	c #3F7410",
-"P.	c #6E8378",
-"Q.	c #6B6B8F",
-"R.	c #565673",
-"S.	c #60607F",
-"T.	c #8585B1",
-"U.	c #858AAB",
-"V.	c #627864",
-"W.	c #505E58",
-"X.	c #404055",
-"Y.	c #3F3F53",
-"Z.	c #47475F",
-"`.	c #53536E",
-" +	c #585876",
-".+	c #52526D",
-"++	c #424258",
-"                                          ",
-"              . + @ # $ %                 ",
-"          & . * = - ; > ; , '             ",
-"        . @ ) ! ~ { ] ^ / ( ( _           ",
-"      : < [ } | 1 2 3 4 5 6 7 { 8         ",
-"    9 0 a b c 1 1 d e f g 1 | h i j       ",
-"    $ > k l m n o p q r s 1 1 | t u       ",
-"  v v w x y z A B C D E F G H 1 I J K     ",
-"  L , _ M N O P Q R S T U V W X Y Z `     ",
-"   .' ..1 +.@.#.#.O $.E %.&.*.=.-.;.>.    ",
-"  ( ,.| 1 1 '.).T !.~.{.].^./.(._.:.<.    ",
-"  _ [.c 1 }.|.1.%.&.2.3.4.5.6.7.8.K <.    ",
-"  | 9.1 7.0.a.b.c.].b.d.e.f.1 g.h.i.<.    ",
-"    j.k.l.m.n.o.p.q.r.s.t.u.v.8.w.<.      ",
-"    h.x.y.z.A.B.1 C.D.E.F.G.H.I.<.<.      ",
-"      I.J.K.L.7.1 1 M.N.O.P.Q.<.<.        ",
-"        R.S.;.T.i t 8 U.V.W.<.<.          ",
-"          X.Y.Z.`. +.+++<.<.<.            ",
-"              <.<.<.<.<.<.                ",
-"                                          ",
-"                                          "};
diff --git a/perl-install/share/step-orange-click.xpm b/perl-install/share/step-orange-click.xpm
deleted file mode 100644
index 512d947f5..000000000
--- a/perl-install/share/step-orange-click.xpm
+++ /dev/null
@@ -1,164 +0,0 @@
-/* XPM */
-static char * step_orange_click_xpm[] = {
-"21 21 140 2",
-"  	c None",
-". 	c #525266",
-"+ 	c #58586E",
-"@ 	c #6D6D89",
-"# 	c #767693",
-"$ 	c #6E6E89",
-"% 	c #5F5F76",
-"& 	c #535368",
-"* 	c #55556A",
-"= 	c #72728E",
-"- 	c #9F9FC7",
-"; 	c #B6B6E4",
-"> 	c #C0C0F1",
-", 	c #C4C4F5",
-"' 	c #BFBFEE",
-") 	c #B1B1DD",
-"! 	c #9A9AC1",
-"~ 	c #7F7F9F",
-"{ 	c #737390",
-"] 	c #8F8FB2",
-"^ 	c #B9B9E7",
-"/ 	c #C8C8FA",
-"( 	c #CCCCFF",
-"_ 	c #C6BEDE",
-": 	c #CAB6BD",
-"< 	c #CBCBFE",
-"[ 	c #C6C6F7",
-"} 	c #B5B5E2",
-"| 	c #9090B4",
-"1 	c #BEBEED",
-"2 	c #CACAFD",
-"3 	c #9A7A5D",
-"4 	c #CC9960",
-"5 	c #C8C8F9",
-"6 	c #BBBBE9",
-"7 	c #ABABD5",
-"8 	c #A7A7D1",
-"9 	c #7B7B9A",
-"0 	c #BABAE9",
-"a 	c #C5BEE0",
-"b 	c #CBCBFC",
-"c 	c #ADA1B1",
-"d 	c #855000",
-"e 	c #DB9840",
-"f 	c #C2C2F2",
-"g 	c #BCBCEB",
-"h 	c #59596F",
-"i 	c #B89579",
-"j 	c #8E6125",
-"k 	c #8F7560",
-"l 	c #968178",
-"m 	c #755325",
-"n 	c #A66400",
-"o 	c #D98B1D",
-"p 	c #CCC7F0",
-"q 	c #CDCDFF",
-"r 	c #757592",
-"s 	c #CDC7ED",
-"t 	c #C98D3F",
-"u 	c #B56D00",
-"v 	c #A56300",
-"w 	c #B26B00",
-"x 	c #D58000",
-"y 	c #DD8400",
-"z 	c #C08A47",
-"A 	c #B99982",
-"B 	c #C8B0B0",
-"C 	c #CFC6E7",
-"D 	c #D1D1FF",
-"E 	c #8B8BAD",
-"F 	c #CCC4E6",
-"G 	c #C88831",
-"H 	c #ED8E00",
-"I 	c #FA9600",
-"J 	c #FF9E0D",
-"K 	c #FFA319",
-"L 	c #FFA928",
-"M 	c #FAB249",
-"N 	c #DBC4C5",
-"O 	c #D4D4FF",
-"P 	c #D6D6FF",
-"Q 	c #5B5B71",
-"R 	c #C9C9FC",
-"S 	c #AE865B",
-"T 	c #FF9B06",
-"U 	c #FFA41B",
-"V 	c #FFB74C",
-"W 	c #FACA87",
-"X 	c #E8CFC1",
-"Y 	c #D2CCF0",
-"Z 	c #CFCFFF",
-"` 	c #D9D9FF",
-" .	c #DADAFF",
-"..	c #686881",
-"+.	c #9C9CC3",
-"@.	c #BEB2C8",
-"#.	c #BB7103",
-"$.	c #FFA51E",
-"%.	c #FFB13C",
-"&.	c #FFB13D",
-"*.	c #FFC164",
-"=.	c #E0CCCB",
-"-.	c #DDDDFF",
-";.	c #DEDEFF",
-">.	c #9898BD",
-",.	c #C6C6F8",
-"'.	c #CCC9F5",
-").	c #D29547",
-"!.	c #FDB242",
-"~.	c #F0CA9F",
-"{.	c #EAC6A6",
-"].	c #FCBA5A",
-"^.	c #FFC46C",
-"/.	c #DEC7C8",
-"(.	c #E1E1FF",
-"_.	c #9A9AC0",
-":.	c #D3C3D5",
-"<.	c #E8BB8C",
-"[.	c #D4CBE8",
-"}.	c #DCC5C6",
-"|.	c #FDC572",
-"1.	c #E3C8BC",
-"2.	c #DFDFFF",
-"3.	c #E6E6FF",
-"4.	c #A2A2CA",
-"5.	c #CECEFF",
-"6.	c #DFC7C3",
-"7.	c #E1C9C4",
-"8.	c #D0D0FF",
-"9.	c #DCDCFF",
-"0.	c #E8E8FF",
-"a.	c #E9E9FF",
-"b.	c #D2D2FF",
-"c.	c #EDEDFF",
-"d.	c #D3D3FF",
-"e.	c #E2E2FF",
-"f.	c #EBEBFF",
-"g.	c #EFEFFF",
-"h.	c #F0F0FF",
-"i.	c #E3E3FF",
-"                                          ",
-"              . . . . . .                 ",
-"          . . . + @ # $ % & *             ",
-"        . . = - ; > , ' ) ! ~ {           ",
-"      . . ] ^ / ( ( _ : < [ } ! |         ",
-"    . . | 1 2 ( ( ( 3 4 ( < 5 6 7 8       ",
-"    . 9 0 a b ( ( c d e ( ( < 5 f g       ",
-"  . h 8 / i j k l m n o p ( ( < ( q q     ",
-"  . r 0 ( s t u v w x y z A B C q D D     ",
-"  . E , ( ( F G y H I J K L M N q O P     ",
-"  Q ! R ( ( ( S y T U V W X Y ( Z `  .    ",
-"  ..+.R ( ( @.#.$.%.&.*.=.( ( ( D -.;.    ",
-"  r >.,.( '.).!.~.{.].^./.( ( q P (.(.    ",
-"    _., q :.<.[.( ( }.|.1.( q D 2.3.      ",
-"    4.' 5.q ( ( ( ( ( 6.7.q 8.9.0.a.      ",
-"      > Z 8.5.( ( ( ( ( q b.9.0.c.        ",
-"        D P P d.8.5.Z b.` e.f.g.          ",
-"          ` -.2.2.2.e.3.f.g.h.            ",
-"              i.3.a.f.c.g.                ",
-"                                          ",
-"                                          "};
diff --git a/perl-install/share/step-orange-on.xpm b/perl-install/share/step-orange-on.xpm
deleted file mode 100644
index b749321f8..000000000
--- a/perl-install/share/step-orange-on.xpm
+++ /dev/null
@@ -1,206 +0,0 @@
-/* XPM */
-static char * step_orange_on_xpm[] = {
-"21 21 182 2",
-"  	c None",
-". 	c #EFEFFF",
-"+ 	c #EDEDFF",
-"@ 	c #EBEBFF",
-"# 	c #E9E9FF",
-"$ 	c #E6E6FF",
-"% 	c #E3E3FF",
-"& 	c #F0F0FF",
-"* 	c #E2E2FF",
-"= 	c #DFDFFF",
-"- 	c #DDDDFF",
-"; 	c #D9D9FF",
-"> 	c #D2D2FF",
-", 	c #CFCFFF",
-"' 	c #D7CDE7",
-") 	c #E7C7AD",
-"! 	c #DEC6C2",
-"~ 	c #D7D5FB",
-"{ 	c #D6D6FF",
-"] 	c #D1D1FF",
-"^ 	c #E8E8FF",
-"/ 	c #DCDCFF",
-"( 	c #CDCDFF",
-"_ 	c #CCCCFF",
-": 	c #CCCCFE",
-"< 	c #E4CDC7",
-"[ 	c #F6BA67",
-"} 	c #D5B5A8",
-"| 	c #CECDFC",
-"1 	c #D0D0FF",
-"2 	c #C0C0F1",
-"3 	c #DFD9EF",
-"4 	c #D1CFFA",
-"5 	c #CDCDFE",
-"6 	c #D8CDE5",
-"7 	c #F8CD93",
-"8 	c #FEA520",
-"9 	c #C8A998",
-"0 	c #CCCAF8",
-"a 	c #CECEFF",
-"b 	c #BFBFEE",
-"c 	c #A2A2CA",
-"d 	c #E8CBB6",
-"e 	c #E4CCC2",
-"f 	c #DACBD9",
-"g 	c #D6CCE6",
-"h 	c #D7CEE8",
-"i 	c #EDD0B9",
-"j 	c #FFC36A",
-"k 	c #FD9A07",
-"l 	c #CAA485",
-"m 	c #CDC9F3",
-"n 	c #C4C4F5",
-"o 	c #9A9AC0",
-"p 	c #E1E1FF",
-"q 	c #E5BD9A",
-"r 	c #FFB951",
-"s 	c #F9C47A",
-"t 	c #F4CA96",
-"u 	c #F5CE9C",
-"v 	c #FDC779",
-"w 	c #FFB342",
-"x 	c #FF9A03",
-"y 	c #E6A34F",
-"z 	c #D7C3CC",
-"A 	c #D0CAF0",
-"B 	c #CECBF7",
-"C 	c #C7C5F4",
-"D 	c #9898BD",
-"E 	c #757592",
-"F 	c #DEDEFF",
-"G 	c #CEC8EF",
-"H 	c #DCA668",
-"I 	c #FF9C07",
-"J 	c #FFAD33",
-"K 	c #FFB340",
-"L 	c #FFA318",
-"M 	c #FF9D0A",
-"N 	c #FDA31E",
-"O 	c #F1B76D",
-"P 	c #EAC199",
-"Q 	c #E7BE9A",
-"R 	c #DABBAF",
-"S 	c #9C9CC3",
-"T 	c #686881",
-"U 	c #DADAFF",
-"V 	c #CDC7EC",
-"W 	c #DEA460",
-"X 	c #FD9B0C",
-"Y 	c #FF9E0C",
-"Z 	c #FF9D09",
-"` 	c #FF9B04",
-" .	c #FF9901",
-"..	c #FD9800",
-"+.	c #FA9600",
-"@.	c #F19000",
-"#.	c #D17D00",
-"$.	c #BD8F5D",
-"%.	c #9A9AC1",
-"&.	c #5B5B71",
-"*.	c #D4D4FF",
-"=.	c #D9C4CA",
-"-.	c #F9AE42",
-";.	c #FFA115",
-">.	c #ED8E00",
-",.	c #C37500",
-"'.	c #905B0A",
-").	c #7D592C",
-"!.	c #927C6F",
-"~.	c #B2A6B9",
-"{.	c #8B8BAD",
-"].	c #525266",
-"^.	c #CECBF9",
-"/.	c #E2C7BA",
-"(.	c #FEB64A",
-"_.	c #F09000",
-":.	c #F29100",
-"<.	c #DA8300",
-"[.	c #9B600A",
-"}.	c #907869",
-"|.	c #B4ABC4",
-"1.	c #C8C6F4",
-"2.	c #BABAE9",
-"3.	c #CBCBFE",
-"4.	c #D1CBF1",
-"5.	c #F8BC69",
-"6.	c #F59300",
-"7.	c #AF6900",
-"8.	c #B16B00",
-"9.	c #CD7B00",
-"0.	c #9C6822",
-"a.	c #B4A6B7",
-"b.	c #C8C8FA",
-"c.	c #A7A7D1",
-"d.	c #59596F",
-"e.	c #BCBCEB",
-"f.	c #C2C2F2",
-"g.	c #CDC6E9",
-"h.	c #EDB675",
-"i.	c #926D43",
-"j.	c #947F74",
-"k.	c #A3897A",
-"l.	c #B07627",
-"m.	c #A97328",
-"n.	c #BEAEBC",
-"o.	c #CAC9FB",
-"p.	c #7B7B9A",
-"q.	c #ABABD5",
-"r.	c #C4B7CC",
-"s.	c #CB9452",
-"t.	c #AC958F",
-"u.	c #BEB9DC",
-"v.	c #C7C4F0",
-"w.	c #CAC7F5",
-"x.	c #C0AAAC",
-"y.	c #B37417",
-"z.	c #9F630B",
-"A.	c #BBA8AF",
-"B.	c #BEBDEA",
-"C.	c #9090B4",
-"D.	c #9B9ABD",
-"E.	c #B6AECB",
-"F.	c #C5C4F1",
-"G.	c #CCCAFA",
-"H.	c #BFA6A2",
-"I.	c #8D5F1E",
-"J.	c #A2897D",
-"K.	c #918EAA",
-"L.	c #737390",
-"M.	c #7F7F9F",
-"N.	c #B1B1DD",
-"O.	c #B6B5E0",
-"P.	c #9E96AB",
-"Q.	c #766F7D",
-"R.	c #545364",
-"S.	c #55556A",
-"T.	c #535368",
-"U.	c #5F5F76",
-"V.	c #6E6E89",
-"W.	c #767693",
-"X.	c #6D6D89",
-"Y.	c #58586E",
-"                                          ",
-"              . + @ # $ %                 ",
-"          & . @ $ * = = = - ;             ",
-"        . @ * ; > , ' ) ! ~ { ]           ",
-"      + ^ / > ( _ : < [ } | 1 , 2         ",
-"    # ^ 3 4 5 : : 6 7 8 9 0 ( a b c       ",
-"    $ = d e f g h i j k l m _ ( n o       ",
-"  p p { q r s t u v w x y z A B C D E     ",
-"  F - ] G H I J K J L M N O P Q R S T     ",
-"  U ; , _ V W X Y Z `  ...+.@.#.$.%.&.    ",
-"  { *.( _ _ =.-.;.x ..>.,.'.).!.~.{.].    ",
-"  ] ] ( _ ^./.(.I _.:.<.[.}.|.1.2.E ].    ",
-"  ( ( _ 3.4.5.6.7.8.#.9.0.a._ b.c.d.].    ",
-"    e.f.g.h.<.i.j.k.l.,.m.n.o.2.p.].      ",
-"    c.q.r.s.t.u.v.w.x.y.z.A.B.C.].].      ",
-"      C.D.E.F.3._ _ G.H.I.J.K.].].        ",
-"        L.M.%.N.b n 2 O.P.Q.R.].          ",
-"          S.T.U.V.W.X.Y.].].].            ",
-"              ].].].].].].                ",
-"                                          ",
-"                                          "};
diff --git a/perl-install/share/step-orange.xpm b/perl-install/share/step-orange.xpm
deleted file mode 100644
index 1e577f66a..000000000
--- a/perl-install/share/step-orange.xpm
+++ /dev/null
@@ -1,219 +0,0 @@
-/* XPM */
-static char * step_orange_xpm[] = {
-"21 21 195 2",
-"  	c None",
-". 	c #DFDFEF",
-"+ 	c #DBDBED",
-"@ 	c #D8D8EB",
-"# 	c #D3D3E9",
-"$ 	c #CDCDE6",
-"% 	c #C8C8E3",
-"& 	c #E1E1F0",
-"* 	c #D7D7EB",
-"= 	c #CECEE6",
-"- 	c #C5C5E2",
-"; 	c #C0C0DF",
-"> 	c #BFBFDF",
-", 	c #BBBBDD",
-"' 	c #B3B3D9",
-") 	c #C6C6E2",
-"! 	c #B2B2D9",
-"~ 	c #A5A5D2",
-"{ 	c #9F9FCF",
-"] 	c #AFA5BE",
-"^ 	c #CFAE96",
-"/ 	c #BEA5A2",
-"( 	c #ADACD3",
-"_ 	c #ACACD6",
-": 	c #A4A4D1",
-"< 	c #DADAED",
-"[ 	c #D2D2E8",
-"} 	c #BABADC",
-"| 	c #A4A4D2",
-"1 	c #9B9BCD",
-"2 	c #9999CC",
-"3 	c #C8B2AB",
-"4 	c #EEB15E",
-"5 	c #B39486",
-"6 	c #9E9DCC",
-"7 	c #A2A2D0",
-"8 	c #9090C0",
-"9 	c #D4D4E9",
-"0 	c #D1D1E8",
-"a 	c #C0B9CF",
-"b 	c #A4A2CD",
-"c 	c #9B9ACC",
-"d 	c #9A99CB",
-"e 	c #B0A6BD",
-"f 	c #F1C68C",
-"g 	c #FDA41F",
-"h 	c #AA8A7A",
-"i 	c #9B98C6",
-"j 	c #9E9ECE",
-"k 	c #8F8FBF",
-"l 	c #7979A2",
-"m 	c #D1B49F",
-"n 	c #C9B1A8",
-"o 	c #B5A6B4",
-"p 	c #ADA3BD",
-"q 	c #AFA6C0",
-"r 	c #DABEA6",
-"s 	c #FFC36A",
-"t 	c #FB9906",
-"u 	c #AF896A",
-"v 	c #9D98C2",
-"w 	c #9393C4",
-"x 	c #73739A",
-"y 	c #C3C3E1",
-"z 	c #ADADD6",
-"A 	c #CCA381",
-"B 	c #FFB951",
-"C 	c #F3BE74",
-"D 	c #E9BF8B",
-"E 	c #EBC492",
-"F 	c #FBC577",
-"G 	c #FFB342",
-"H 	c #FF9A03",
-"I 	c #D6933F",
-"J 	c #B09BA4",
-"K 	c #A19BC1",
-"L 	c #9D9AC6",
-"M 	c #9795C3",
-"N 	c #727298",
-"O 	c #585875",
-"P 	c #BCBCDE",
-"Q 	c #9E98BF",
-"R 	c #C79153",
-"S 	c #FF9C07",
-"T 	c #FFAD33",
-"U 	c #FFB340",
-"V 	c #FFA318",
-"W 	c #FF9D0A",
-"X 	c #FBA11C",
-"Y 	c #E3A95F",
-"Z 	c #D5AC84",
-"` 	c #CEA681",
-" .	c #B8998C",
-"..	c #75759C",
-"+.	c #4E4E68",
-"@.	c #B5B5DA",
-"#.	c #9E9ECF",
-"$.	c #9E98BD",
-"%.	c #CB914D",
-"&.	c #FB990A",
-"*.	c #FF9E0C",
-"=.	c #FF9D09",
-"-.	c #FF9B04",
-";.	c #FF9901",
-">.	c #FD9800",
-",.	c #FA9600",
-"'.	c #F19000",
-").	c #D17D00",
-"!.	c #AB7C4A",
-"~.	c #74749A",
-"{.	c #44445B",
-"].	c #A9A9D4",
-"^.	c #B29DA4",
-"/.	c #F3A83C",
-"(.	c #FFA115",
-"_.	c #ED8E00",
-":.	c #C37500",
-"<.	c #8E5908",
-"[.	c #745023",
-"}.	c #7C6659",
-"|.	c #8D8194",
-"1.	c #68688B",
-"2.	c #3E3E52",
-"3.	c #A3A3D1",
-"4.	c #9A9ACD",
-"5.	c #9D9AC8",
-"6.	c #C6AB9E",
-"7.	c #FCB449",
-"8.	c #F09000",
-"9.	c #F29100",
-"0.	c #DA8300",
-"a.	c #995E08",
-"b.	c #7B6354",
-"c.	c #8D849D",
-"d.	c #8C8CBA",
-"e.	c #9C9CCD",
-"f.	c #9999CB",
-"g.	c #A39DC3",
-"h.	c #F1B662",
-"i.	c #F59300",
-"j.	c #AF6900",
-"k.	c #B16B00",
-"l.	c #CD7B00",
-"m.	c #96621B",
-"n.	c #8F8292",
-"o.	c #9696C8",
-"p.	c #7D7DA7",
-"q.	c #434359",
-"r.	c #8D8DBC",
-"s.	c #9191C2",
-"t.	c #9F99BC",
-"u.	c #DDA664",
-"v.	c #845F36",
-"w.	c #7D675D",
-"x.	c #8A7062",
-"y.	c #A86F1F",
-"z.	c #A16B20",
-"A.	c #988996",
-"B.	c #9898C8",
-"C.	c #5D5D7B",
-"D.	c #8080AB",
-"E.	c #9A8EA4",
-"F.	c #BB8442",
-"G.	c #907973",
-"H.	c #928DB0",
-"I.	c #9794C0",
-"J.	c #9996C4",
-"K.	c #9E888A",
-"L.	c #AF6F12",
-"M.	c #9D6109",
-"N.	c #98858B",
-"O.	c #8F8EBC",
-"P.	c #6C6C90",
-"Q.	c #767497",
-"R.	c #8D86A3",
-"S.	c #9493C1",
-"T.	c #9A98C8",
-"U.	c #9E8682",
-"V.	c #875918",
-"W.	c #897064",
-"X.	c #6F6B88",
-"Y.	c #565673",
-"Z.	c #60607F",
-"`.	c #8585B1",
-" +	c #8A89B2",
-".+	c #7D7489",
-"++	c #5E5765",
-"@+	c #403F51",
-"#+	c #404055",
-"$+	c #3F3F53",
-"%+	c #47475F",
-"&+	c #53536E",
-"*+	c #585876",
-"=+	c #52526D",
-"-+	c #424258",
-"                                          ",
-"              . + @ # $ %                 ",
-"          & . * = - ; > ; , '             ",
-"        . @ ) ! ~ { ] ^ / ( _ :           ",
-"      < [ } | 1 2 2 3 4 5 6 7 { 8         ",
-"    9 0 a b c 2 d e f g h i 1 j k l       ",
-"    $ > m n o p q r s t u v 2 1 w x       ",
-"  y y z A B C D E F G H I J K L M N O     ",
-"  P , : Q R S T U T V W X Y Z `  ...+.    ",
-"  @.' #.2 $.%.&.*.=.-.;.>.,.'.).!.~.{.    ",
-"  _ ].1 2 2 ^./.(.H >._.:.<.[.}.|.1.2.    ",
-"  : 3.4.2 5.6.7.S 8.9.0.a.b.c.M d.O 2.    ",
-"  1 e.2 f.g.h.i.j.k.).l.m.n.2 o.p.q.2.    ",
-"    r.s.t.u.0.v.w.x.y.:.z.A.B.d.C.2.      ",
-"    p.D.E.F.G.H.I.J.K.L.M.N.O.P.2.2.      ",
-"      P.Q.R.S.f.2 2 T.U.V.W.X.2.2.        ",
-"        Y.Z.~.`.k w 8  +.+++@+2.          ",
-"          #+$+%+&+*+=+-+2.2.2.            ",
-"              2.2.2.2.2.2.                ",
-"                                          ",
-"                                          "};
diff --git a/perl-install/share/step-red-click.xpm b/perl-install/share/step-red-click.xpm
deleted file mode 100644
index c3c6f24ed..000000000
--- a/perl-install/share/step-red-click.xpm
+++ /dev/null
@@ -1,175 +0,0 @@
-/* XPM */
-static char * step_red_click_xpm[] = {
-"21 21 151 2",
-"  	c None",
-". 	c #525266",
-"+ 	c #58586E",
-"@ 	c #6D6D89",
-"# 	c #767693",
-"$ 	c #6E6E89",
-"% 	c #5F5F76",
-"& 	c #535368",
-"* 	c #55556A",
-"= 	c #72728E",
-"- 	c #9F9FC7",
-"; 	c #B6B6E4",
-"> 	c #C0C0F1",
-", 	c #C4C4F5",
-"' 	c #BFBFEE",
-") 	c #B1B1DD",
-"! 	c #9A9AC1",
-"~ 	c #7F7F9F",
-"{ 	c #737390",
-"] 	c #8F8FB2",
-"^ 	c #B9B9E7",
-"/ 	c #C8C8FA",
-"( 	c #CCCCFF",
-"_ 	c #C4A6CE",
-": 	c #CDACD5",
-"< 	c #CBCAFD",
-"[ 	c #C6C6F7",
-"} 	c #B5B5E2",
-"| 	c #9090B4",
-"1 	c #BEBEED",
-"2 	c #CACAFD",
-"3 	c #C8C4F5",
-"4 	c #A35261",
-"5 	c #D285A1",
-"6 	c #CBCBFE",
-"7 	c #C8C8F9",
-"8 	c #BBBBE9",
-"9 	c #ABABD5",
-"0 	c #A7A7D1",
-"a 	c #7B7B9A",
-"b 	c #BABAE9",
-"c 	c #C6BBEA",
-"d 	c #C9C4F4",
-"e 	c #A382A1",
-"f 	c #991F1F",
-"g 	c #DB7992",
-"h 	c #C2C2F2",
-"i 	c #BCBCEB",
-"j 	c #59596F",
-"k 	c #AB6A80",
-"l 	c #935566",
-"m 	c #9B748F",
-"n 	c #9D7893",
-"o 	c #783038",
-"p 	c #B12323",
-"q 	c #D85F70",
-"r 	c #CCC1F1",
-"s 	c #CDCDFF",
-"t 	c #757592",
-"u 	c #CB93B5",
-"v 	c #B72D30",
-"w 	c #A32121",
-"x 	c #981E1E",
-"y 	c #AD2323",
-"z 	c #D32A2A",
-"A 	c #D33437",
-"B 	c #BC6A7F",
-"C 	c #BF9BC0",
-"D 	c #C8A9D1",
-"E 	c #CEBCEA",
-"F 	c #D1D1FF",
-"G 	c #8B8BAD",
-"H 	c #CD8DAC",
-"I 	c #D13538",
-"J 	c #E02D2D",
-"K 	c #EC2F2F",
-"L 	c #F83232",
-"M 	c #FE3333",
-"N 	c #FD3333",
-"O 	c #FF3636",
-"P 	c #F36470",
-"Q 	c #DBA7CB",
-"R 	c #D4D4FF",
-"S 	c #D6D6FF",
-"T 	c #5B5B71",
-"U 	c #C9C9FC",
-"V 	c #C9C0EF",
-"W 	c #B7454F",
-"X 	c #E92F2F",
-"Y 	c #FF4949",
-"Z 	c #FF7070",
-"` 	c #FB969A",
-" .	c #EDAFC1",
-"..	c #DCBBDE",
-"+.	c #D1C4F2",
-"@.	c #CFCFFF",
-"#.	c #D9D9FF",
-"$.	c #DADAFF",
-"%.	c #686881",
-"&.	c #9C9CC3",
-"*.	c #B693B6",
-"=.	c #C22E31",
-"-.	c #FF4747",
-";.	c #FF5959",
-">.	c #FF6161",
-",.	c #FD8A8C",
-"'.	c #E0BAD9",
-").	c #CECAFB",
-"!.	c #DDDDFF",
-"~.	c #DEDEFF",
-"{.	c #9898BD",
-"].	c #C6C6F8",
-"^.	c #C9BAE7",
-"/.	c #CE4F5B",
-"(.	c #FF5F5F",
-"_.	c #F49BA5",
-":.	c #F48D98",
-"<.	c #FF7575",
-"[.	c #FC8C8F",
-"}.	c #D6BDE5",
-"|.	c #E1E1FF",
-"1.	c #9A9AC0",
-"2.	c #D8A0C4",
-"3.	c #EC8598",
-"4.	c #DCBADD",
-"5.	c #CFC9F9",
-"6.	c #D0C6F6",
-"7.	c #EB94A9",
-"8.	c #FF9191",
-"9.	c #DCB4D6",
-"0.	c #DFDFFF",
-"a.	c #E6E6FF",
-"b.	c #A2A2CA",
-"c.	c #CECEFF",
-"d.	c #CFC8F8",
-"e.	c #CDCAFC",
-"f.	c #D0C4F3",
-"g.	c #EAA5B9",
-"h.	c #DCB8DB",
-"i.	c #D0D0FF",
-"j.	c #DCDCFF",
-"k.	c #E8E8FF",
-"l.	c #E9E9FF",
-"m.	c #D2D2FF",
-"n.	c #EDEDFF",
-"o.	c #D3D3FF",
-"p.	c #E2E2FF",
-"q.	c #EBEBFF",
-"r.	c #EFEFFF",
-"s.	c #F0F0FF",
-"t.	c #E3E3FF",
-"                                          ",
-"              . . . . . .                 ",
-"          . . . + @ # $ % & *             ",
-"        . . = - ; > , ' ) ! ~ {           ",
-"      . . ] ^ / ( ( _ : < [ } ! |         ",
-"    . . | 1 2 ( ( 3 4 5 ( 6 7 8 9 0       ",
-"    . a b c d ( ( e f g ( ( 6 7 h i       ",
-"  . j 0 / k l m n o p q r ( ( 6 ( s s     ",
-"  . t b ( u v w x y z A B C D E s F F     ",
-"  . G , ( ( H I J K L M N O P Q s R S     ",
-"  T ! U ( ( V W X O Y Z `  ...+.@.#.$.    ",
-"  %.&.U ( ( *.=.-.;.>.,.'.).( ( F !.~.    ",
-"  t {.].( ^./.(._.:.<.[.}.( ( s S |.|.    ",
-"    1., s 2.3.4.5.6.7.8.9.( s F 0.a.      ",
-"    b.' c.d.e.( ( ( f.g.h.s i.j.k.l.      ",
-"      > @.i.c.( ( ( ( ( s m.j.k.n.        ",
-"        F S S o.i.c.@.m.#.p.q.r.          ",
-"          #.!.0.0.0.p.a.q.r.s.            ",
-"              t.a.l.q.n.r.                ",
-"                                          ",
-"                                          "};
diff --git a/perl-install/share/step-red-on.xpm b/perl-install/share/step-red-on.xpm
deleted file mode 100644
index f7db4f47e..000000000
--- a/perl-install/share/step-red-on.xpm
+++ /dev/null
@@ -1,204 +0,0 @@
-/* XPM */
-static char * step_red_on_xpm[] = {
-"21 21 180 2",
-"  	c None",
-". 	c #EFEFFF",
-"+ 	c #EDEDFF",
-"@ 	c #EBEBFF",
-"# 	c #E9E9FF",
-"$ 	c #E6E6FF",
-"% 	c #E3E3FF",
-"& 	c #F0F0FF",
-"* 	c #E2E2FF",
-"= 	c #DFDFFF",
-"- 	c #DDDDFF",
-"; 	c #D9D9FF",
-"> 	c #D2D2FF",
-", 	c #CFCFFF",
-"' 	c #D9C1E7",
-") 	c #EA9FB4",
-"! 	c #DBB7DA",
-"~ 	c #D6D6FF",
-"{ 	c #D1D1FF",
-"] 	c #E8E8FF",
-"^ 	c #DCDCFF",
-"/ 	c #CDCDFF",
-"( 	c #CCCCFF",
-"_ 	c #CECAFB",
-": 	c #EBB0C4",
-"< 	c #FB676C",
-"[ 	c #D0A3C8",
-"} 	c #CECEFF",
-"| 	c #D0D0FF",
-"1 	c #C0C0F1",
-"2 	c #DFD4F4",
-"3 	c #D2CCF9",
-"4 	c #CECBFC",
-"5 	c #CCCCFE",
-"6 	c #DBC1E4",
-"7 	c #FC999C",
-"8 	c #FC4245",
-"9 	c #C797BA",
-"0 	c #BFBFEE",
-"a 	c #A2A2CA",
-"b 	c #EBABC0",
-"c 	c #EAB2C7",
-"d 	c #E2B4D1",
-"e 	c #DDBDDF",
-"f 	c #DDC1E3",
-"g 	c #F3AEBB",
-"h 	c #FF8181",
-"i 	c #F73638",
-"j 	c #CD829E",
-"k 	c #C4C4F5",
-"l 	c #9A9AC0",
-"m 	c #E1E1FF",
-"n 	c #E690A9",
-"o 	c #FF6B6B",
-"p 	c #FF8282",
-"q 	c #FB9195",
-"r 	c #FB989C",
-"s 	c #FF8383",
-"t 	c #FF5E5E",
-"u 	c #FF3636",
-"v 	c #EE5A67",
-"w 	c #DAABD0",
-"x 	c #D1C4F2",
-"y 	c #CDCAFC",
-"z 	c #C6C6F8",
-"A 	c #9898BD",
-"B 	c #757592",
-"C 	c #DEDEFF",
-"D 	c #CDC5F6",
-"E 	c #D9758B",
-"F 	c #FD3333",
-"G 	c #FF4E4E",
-"H 	c #FF5757",
-"I 	c #FF4040",
-"J 	c #FF3D3D",
-"K 	c #FF4747",
-"L 	c #F76D75",
-"M 	c #ED8FA1",
-"N 	c #E795AD",
-"O 	c #E08CAA",
-"P 	c #9C9CC3",
-"Q 	c #686881",
-"R 	c #DADAFF",
-"S 	c #CEC0EF",
-"T 	c #E76677",
-"U 	c #FF3838",
-"V 	c #FF3535",
-"W 	c #FF3434",
-"X 	c #FC3232",
-"Y 	c #F33131",
-"Z 	c #E62E2E",
-"` 	c #D82B2B",
-" .	c #C0292A",
-"..	c #B55463",
-"+.	c #9A9AC1",
-"@.	c #5B5B71",
-"#.	c #D4D4FF",
-"$.	c #DFA4C4",
-"%.	c #FF5858",
-"&.	c #FF3F3F",
-"*.	c #FF3333",
-"=.	c #B42424",
-"-.	c #7D1F21",
-";.	c #834856",
-">.	c #A382A1",
-",.	c #B8A8D1",
-"'.	c #8B8BAD",
-").	c #525266",
-"!.	c #CEC9FA",
-"~.	c #ED9BAD",
-"{.	c #FF6161",
-"].	c #F53131",
-"^.	c #EB2F2F",
-"/.	c #F03030",
-"(.	c #D12A2A",
-"_.	c #912A2F",
-":.	c #9D7792",
-"<.	c #C0B6E3",
-"[.	c #CCCBFE",
-"}.	c #BABAE9",
-"|.	c #CBCBFE",
-"1.	c #D8BCE3",
-"2.	c #FD696A",
-"3.	c #D62B2B",
-"4.	c #9A1F1F",
-"5.	c #A82121",
-"6.	c #CA2828",
-"7.	c #C52727",
-"8.	c #9C3F49",
-"9.	c #BDABD5",
-"0.	c #C8C8FA",
-"a.	c #A7A7D1",
-"b.	c #59596F",
-"c.	c #BCBCEB",
-"d.	c #C2C2F2",
-"e.	c #CEBCE7",
-"f.	c #F4616B",
-"g.	c #BB2525",
-"h.	c #864C5C",
-"i.	c #9F7B98",
-"j.	c #A67C98",
-"k.	c #AC3F47",
-"l.	c #BC2525",
-"m.	c #A8414B",
-"n.	c #C2A9D1",
-"o.	c #CACAFD",
-"p.	c #7B7B9A",
-"q.	c #ABABD5",
-"r.	c #C6A0C5",
-"s.	c #C17086",
-"t.	c #B396BA",
-"u.	c #C5C0EF",
-"v.	c #CAC8FA",
-"w.	c #CBC9FB",
-"x.	c #C4A5CD",
-"y.	c #AF393F",
-"z.	c #992A2D",
-"A.	c #BC9BC1",
-"B.	c #BEBEED",
-"C.	c #9090B4",
-"D.	c #9C97BE",
-"E.	c #B5B2DE",
-"F.	c #C6C5F6",
-"G.	c #C096B8",
-"H.	c #8E3D48",
-"I.	c #A7809D",
-"J.	c #8F8EB1",
-"K.	c #737390",
-"L.	c #7F7F9F",
-"M.	c #B1B1DD",
-"N.	c #B6B6E4",
-"O.	c #9F9FC7",
-"P.	c #72728E",
-"Q.	c #55556A",
-"R.	c #535368",
-"S.	c #5F5F76",
-"T.	c #6E6E89",
-"U.	c #767693",
-"V.	c #6D6D89",
-"W.	c #58586E",
-"                                          ",
-"              . + @ # $ %                 ",
-"          & . @ $ * = = = - ;             ",
-"        . @ * ; > , ' ) ! ~ ~ {           ",
-"      + ] ^ > / ( _ : < [ } | , 1         ",
-"    # ] 2 3 4 ( 5 6 7 8 9 ( / } 0 a       ",
-"    $ = b c d e f g h i j ( ( / k l       ",
-"  m m ~ n o p q r s t u v w x y z A B     ",
-"  C - { D E F G H G I J K L M N O P Q     ",
-"  R ; , ( S T U U V W X Y Z `  ...+.@.    ",
-"  ~ #./ ( ( $.%.&.*.X Z =.-.;.>.,.'.).    ",
-"  { { / ( !.~.{.].^./.(._.:.<.[.}.B ).    ",
-"  / / ( |.1.2.3.4.5.6.7.8.9.( 0.a.b.).    ",
-"    c.d.e.f.g.h.i.j.k.l.m.n.o.}.p.).      ",
-"    a.q.r.s.t.u.v.w.x.y.z.A.B.C.).).      ",
-"      C.D.E.F.|.( ( [.G.H.I.J.).).        ",
-"        K.L.+.M.0 k 1 N.O.P.).).          ",
-"          Q.R.S.T.U.V.W.).).).            ",
-"              ).).).).).).                ",
-"                                          ",
-"                                          "};
diff --git a/perl-install/share/step-red.xpm b/perl-install/share/step-red.xpm
deleted file mode 100644
index 6e8b02a5d..000000000
--- a/perl-install/share/step-red.xpm
+++ /dev/null
@@ -1,219 +0,0 @@
-/* XPM */
-static char * step_red_xpm[] = {
-"21 21 195 2",
-"  	c None",
-". 	c #DFDFEF",
-"+ 	c #DBDBED",
-"@ 	c #D8D8EB",
-"# 	c #D3D3E9",
-"$ 	c #CDCDE6",
-"% 	c #C8C8E3",
-"& 	c #E1E1F0",
-"* 	c #D7D7EB",
-"= 	c #CECEE6",
-"- 	c #C5C5E2",
-"; 	c #C0C0DF",
-"> 	c #BFBFDF",
-", 	c #BBBBDD",
-"' 	c #B3B3D9",
-") 	c #C6C6E2",
-"! 	c #B2B2D9",
-"~ 	c #A5A5D2",
-"{ 	c #9F9FCF",
-"] 	c #B49CC1",
-"^ 	c #D4899F",
-"/ 	c #B893B7",
-"( 	c #ACACD6",
-"_ 	c #A4A4D1",
-": 	c #DADAED",
-"< 	c #D2D2E8",
-"[ 	c #BABADC",
-"} 	c #A4A4D2",
-"| 	c #9B9BCD",
-"1 	c #9999CC",
-"2 	c #9D99CA",
-"3 	c #D69BB0",
-"4 	c #F66367",
-"5 	c #AA7DA3",
-"6 	c #9D9DCE",
-"7 	c #A2A2D0",
-"8 	c #9090C0",
-"9 	c #D4D4E9",
-"0 	c #D1D1E8",
-"a 	c #BFB4D4",
-"b 	c #A5A0CC",
-"c 	c #9C99CB",
-"d 	c #9A99CC",
-"e 	c #B89DC1",
-"f 	c #F99699",
-"g 	c #F93F42",
-"h 	c #A47497",
-"i 	c #9E9ECE",
-"j 	c #8F8FBF",
-"k 	c #7979A2",
-"l 	c #D797AB",
-"m 	c #D49CB2",
-"n 	c #C698B4",
-"o 	c #BB9ABD",
-"p 	c #BB9FC1",
-"q 	c #E7A2AE",
-"r 	c #FF8181",
-"s 	c #F53536",
-"t 	c #B16682",
-"u 	c #9393C4",
-"v 	c #73739A",
-"w 	c #C3C3E1",
-"x 	c #ADADD6",
-"y 	c #CD7790",
-"z 	c #FF6B6B",
-"A 	c #FF8282",
-"B 	c #F88E91",
-"C 	c #F79398",
-"D 	c #FF8383",
-"E 	c #FF5E5E",
-"F 	c #FF3636",
-"G 	c #E14D5A",
-"H 	c #B486AB",
-"I 	c #A395C4",
-"J 	c #9B98CA",
-"K 	c #9595C6",
-"L 	c #727298",
-"M 	c #585875",
-"N 	c #BCBCDE",
-"O 	c #9C94C5",
-"P 	c #C25E75",
-"Q 	c #FD3333",
-"R 	c #FF4E4E",
-"S 	c #FF5757",
-"T 	c #FF4040",
-"U 	c #FF3D3D",
-"V 	c #FE4747",
-"W 	c #EF656D",
-"X 	c #DB7E8F",
-"Y 	c #CF7D95",
-"Z 	c #C3708C",
-"` 	c #75759C",
-" .	c #4E4E68",
-"..	c #B5B5DA",
-"+.	c #9E9ECF",
-"@.	c #9F91C0",
-"#.	c #D65466",
-"$.	c #FF3838",
-"%.	c #FF3535",
-"&.	c #FF3434",
-"*.	c #FC3232",
-"=.	c #F33131",
-"-.	c #E62E2E",
-";.	c #D82B2B",
-">.	c #BF2829",
-",.	c #A74554",
-"'.	c #74749A",
-").	c #44445B",
-"!.	c #A9A9D4",
-"~.	c #BE83A4",
-"{.	c #FF5858",
-"].	c #FF3F3F",
-"^.	c #FF3333",
-"/.	c #B42424",
-"(.	c #7B1D1F",
-"_.	c #743A48",
-":.	c #856482",
-"<.	c #8F7FA8",
-"[.	c #68688B",
-"}.	c #3E3E52",
-"|.	c #A3A3D1",
-"1.	c #9A9ACD",
-"2.	c #9D98C9",
-"3.	c #DB899B",
-"4.	c #FF6161",
-"5.	c #F53131",
-"6.	c #EB2F2F",
-"7.	c #F03030",
-"8.	c #D12A2A",
-"9.	c #8D262A",
-"0.	c #815B77",
-"a.	c #9389B6",
-"b.	c #9998CB",
-"c.	c #8C8CBA",
-"d.	c #9C9CCD",
-"e.	c #9999CB",
-"f.	c #B094BC",
-"g.	c #FB6769",
-"h.	c #D62B2B",
-"i.	c #9A1F1F",
-"j.	c #A82121",
-"k.	c #CA2828",
-"l.	c #C52727",
-"m.	c #92353F",
-"n.	c #9481AB",
-"o.	c #9696C8",
-"p.	c #7D7DA7",
-"q.	c #434359",
-"r.	c #8D8DBC",
-"s.	c #9191C2",
-"t.	c #A290BC",
-"u.	c #EA5661",
-"v.	c #BB2525",
-"w.	c #773D4C",
-"x.	c #835F7B",
-"y.	c #8A5F7C",
-"z.	c #A3363F",
-"A.	c #BC2525",
-"B.	c #9E3741",
-"C.	c #9A80A9",
-"D.	c #9898CA",
-"E.	c #5D5D7B",
-"F.	c #8080AB",
-"G.	c #A07AA0",
-"H.	c #AA5970",
-"I.	c #907396",
-"J.	c #9690C0",
-"K.	c #9896C8",
-"L.	c #9997C9",
-"M.	c #9D7EA5",
-"N.	c #A93239",
-"O.	c #95262A",
-"P.	c #98779B",
-"Q.	c #8E8EBE",
-"R.	c #6C6C90",
-"S.	c #777297",
-"T.	c #8986B2",
-"U.	c #9494C5",
-"V.	c #9D7396",
-"W.	c #84333D",
-"X.	c #8A6380",
-"Y.	c #6C6A8E",
-"Z.	c #565673",
-"`.	c #60607F",
-" +	c #8585B1",
-".+	c #8989B6",
-"++	c #78789F",
-"@+	c #565672",
-"#+	c #404055",
-"$+	c #3F3F53",
-"%+	c #47475F",
-"&+	c #53536E",
-"*+	c #585876",
-"=+	c #52526D",
-"-+	c #424258",
-"                                          ",
-"              . + @ # $ %                 ",
-"          & . * = - ; > ; , '             ",
-"        . @ ) ! ~ { ] ^ / ( ( _           ",
-"      : < [ } | 1 2 3 4 5 6 7 { 8         ",
-"    9 0 a b c 1 d e f g h 1 | i j k       ",
-"    $ > l m n o p q r s t 1 1 | u v       ",
-"  w w x y z A B C D E F G H I J K L M     ",
-"  N , _ O P Q R S R T U V W X Y Z `  .    ",
-"  ..' +.1 @.#.$.$.%.&.*.=.-.;.>.,.'.).    ",
-"  ( !.| 1 1 ~.{.].^.*.-./.(._.:.<.[.}.    ",
-"  _ |.1.1 2.3.4.5.6.7.8.9.0.a.b.c.M }.    ",
-"  | d.1 e.f.g.h.i.j.k.l.m.n.1 o.p.q.}.    ",
-"    r.s.t.u.v.w.x.y.z.A.B.C.D.c.E.}.      ",
-"    p.F.G.H.I.J.K.L.M.N.O.P.Q.R.}.}.      ",
-"      R.S.T.U.e.1 1 e.V.W.X.Y.}.}.        ",
-"        Z.`.'. +j u 8 .+++@+}.}.          ",
-"          #+$+%+&+*+=+-+}.}.}.            ",
-"              }.}.}.}.}.}.                ",
-"                                          ",
-"                                          "};
diff --git a/perl-install/share/theme-editor.pl b/perl-install/share/theme-editor.pl
deleted file mode 100755
index fba31a346..000000000
--- a/perl-install/share/theme-editor.pl
+++ /dev/null
@@ -1,161 +0,0 @@
-#!/usr/bin/perl -w
-
-# Theme editor
-
-# Copyright (C) 1999 damien@mandrakesoft.com
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use Gtk;
-use lib qw(/usr/lib/libDrakX);
-use my_gtk qw(:helpers :wrappers);
-use common;
-
-init Gtk;
-
-if ("@ARGV" =~ /-h/) {
-    print q(DrakX theme editor by dam's.
-
-Options :
-    -f specify the input theme file. Default is themes-mdk.rc
-    -o specify the output file. Default is input file.
-    -h print this help.
-)
-}
-my ($file) = "@ARGV" =~ /-f (.+)/;
-my ($file2) = "@ARGV" =~ /-o (.+)/;
-$file ||= "themes-mdk.rc";
-$file2 ||= $file;
-my $window1 = new Gtk::Window -toplevel;
-$window1->signal_connect ( delete_event => sub { Gtk->exit(0); });
-$window1->set_title(_("Theme editor"));
-$window1->set_policy(0, 1, 0);
-$window1->set_border_width(5);
-gtkadd($window1, my $vb = new Gtk::VBox(0,5));
-$window1->show_all;
-$window1->realize;
-my $f;
-my $vb2;
-my $hb;
-my $style;
-my $ref = 0;
-my %color;
-my $cpt = 0;
-my $do_style;
-foreach (cat_($file)) {
-    chomp;
-    if(/style "(.*)"/) {
-	$style = $1;
-	print " -- $style \n";
-	$do_style = 1;
-    }
-    if(/(\w+)\[(\w+)\]\s*=\s*\{\s*([0-9\.]+)\s*,\s*([0-9\.]+)\s*,\s*([0-9\.]+)\s*\}/) {
-	my ($a1, $a2) = ($1, $2);
-	my $style2 = $style;
-	if ($do_style) {
-	    $cpt == 0 and gtkpack__($vb, $hb = new Gtk::HBox(0,5));
-	    $cpt++;
-	    $cpt == 4 and $cpt = 0;
-	    gtkpack__($hb,
-		      gtkadd(gtkset_shadow_type($f = new Gtk::Frame(" $style "), 'etched_out'),
-			     $vb2 = gtkset_border_width(new Gtk::VBox(0,5),5)
-			    )
-		     );
-	    $do_style = 0;
-	}
-	my $c =my_gtk::gtkcolor($3*65535, $4*65535, $5*65535);
-	$color{$style}{$1}{$2} = $c;
-	my $gc = new Gtk::Gdk::GC($window1->window);
-	$gc->set_foreground($c);
-	gtkpack__($vb2,
-		  gtkpack_(new Gtk::HBox(0,0),
-			   1, gtkpack__(new Gtk::HBox(0,0),"$1 [$2] : "),
-			   0, gtksignal_connect(gtkset_relief(my $b = new Gtk::Button(), 'none'), clicked => sub {
-						    $c = change_color($c);
-						    $gc->set_foreground($c);
-						    $color{$style2}{$a1}{$a2} = $c;
-						    $_[0]->draw(undef);
-						})
-			  )
-		 );
-	$b->add(gtksignal_connect(gtksize(gtkset_usize(new Gtk::DrawingArea(), 60, 20), 60, 20), expose_event => sub{ $_[0]->window->draw_rectangle ($gc, 1, 0, 0, 60, 20)} ));
-    }
-    /\{/ and $ref++;
-    if (/\}/) { $ref--; $ref == 0 and undef $style }
-}
-gtkpack__($vb,
-	  gtkadd(gtkset_layout(new Gtk::HButtonBox, -end),
-			      gtksignal_connect(new Gtk::Button(_("OK")), clicked => sub { doit(); Gtk->main_quit() }),
-			      gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub { Gtk->main_quit() }),
-			     )
-	 );
-
-$window1->set_position(1);
-$window1->show_all;
-Gtk->main;
-Gtk->exit(0);
-
-sub doit {
-    system("rm -f /tmp/plop");
-    foreach (cat_($file)) {
-	my $output;
-	chomp;
-	if(/style "(.*)"/) {
-	    $style = $1;
-	    $do_style = 1;
-	}
-	if(/(\w+)\[(\w+)\]\s*=\s*\{\s*([0-9\.]+)\s*,\s*([0-9\.]+)\s*,\s*([0-9\.]+)\s*\}/) {
-	    #	print " - $_ - \n" foreach ($1, $2, $3, $4, $5);
-	    my ($a1, $a2) = ($1, $2);
-	    my $c = $color{$style}{$1}{$2};
-	    $output = $1 . "[" . $2 . "] = { " .
-	      round($c->red()/65535*100)/100 . ", " . round($c->green()/65535*100)/100 . ", " . round($c->blue()/65535*100)/100 . " }";
-	}
-	/\{/ and $ref++;
-	if (/\}/) { $ref--; $ref == 0 and undef $style }
-	$output ||= $_;
-	$output =~ s/ 1 / 1.0 /;
-	$output =~ s/ 1, / 1.0, /;
-	$output =~ s/ 1, / 1.0, /;
-	system("echo '$output' >> /tmp/plop");
-    }
-    system("mv -f /tmp/plop $file2");
-}
-
-sub change_color {
-    my ($color) = @_;
-    my $window = new Gtk::Window -toplevel;
-    my $doit;
-    $window->signal_connect ( delete_event => sub { Gtk->main_quit() });
-    $window->set_position(1);
-    $window->set_title(_("Color configuration"));
-    $window->set_border_width(5);
-    gtkadd(gtkset_modal($window,1),
-	   gtkpack_(new Gtk::VBox(0,5),
-		    1, my $colorsel = new Gtk::ColorSelection,
-		    0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -end),
-			      gtksignal_connect(new Gtk::Button(_("OK")), clicked => sub { $doit=1; Gtk->main_quit() }),
-			      gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub { Gtk->main_quit() }),
-			     )
-		   )
-	  );
-    $colorsel->set_color($color->red()/65535, $color->green()/65535, $color->blue()/65535, $color->pixel());
-    $window->show_all();
-    Gtk->main;
-    $window->destroy();
-    $doit or return $color;
-    my (@color) = $colorsel->get_color();
-    my_gtk::gtkcolor($color[0]*65535, $color[1]*65535, $color[2]*65535);
-}
diff --git a/perl-install/share/themes-blackwhite.rc b/perl-install/share/themes-blackwhite.rc
deleted file mode 100644
index 112d2ea42..000000000
--- a/perl-install/share/themes-blackwhite.rc
+++ /dev/null
@@ -1,62 +0,0 @@
-style "any"
-{
-  base[NORMAL]    = { 0.67, 0.67, 0.67 }
-  bg[NORMAL]      = { 0.67, 0.67, 0.67 }
-  bg[INSENSITIVE] = { 0.67, 0.67, 0.67 }
-  base[INSENSITIVE]={ 0.67, 0.67, 0.67 }
-  bg[ACTIVE]      = { 0, 0, 0 }
-  bg[PRELIGHT]    = { 0, 0, 0 }
-  
-  text[NORMAL] 	  = { 1.0, 1.0, 1.0 }
-  fg[NORMAL]  	  = { 1.0, 1.0, 1.0 }
-  fg[ACTIVE]  	  = { 1.0, 1.0, 1.0 }
-  fg[PRELIGHT]    = { 1.0, 1.0, 1.0 }
-  fg[INSENSITIVE] = { 0.0, 0.0, 0.0 }
-  text[INSENSITIVE]={ 1.0, 1.0, 1.0 }
-
-  bg[SELECTED]    = { 1.0, 1.0, 1.0 }
-  fg[SELECTED]    = { 0, 0, 0 }
-}
-
-style "entry"
-{
-  base[NORMAL] = { 1.0, 1.0, 1.0 }
-  base[ACTIVE] = { 1.0, 1.0, 1.0 }
-  fg[NORMAL] = { 0.67, 0.67, 0.67 }
-}
-
-style "notebook"
-{
-  bg[NORMAL]	  = { 1.0, 1.0, 1.0 }
-  bg[ACTIVE]	  = { 0.67, 0.67, 0.67 }
-  fg[NORMAL]      = { 0, 0, 0 }
-}
-
-style "button" = "any"
-{
-  bg[NORMAL] = { 1.0, 1.0, 1.0 }
-  fg[NORMAL] = { 0, 0, 0 }
-  bg[PRELIGHT] = { 1.0, 1.0, 1.0 }
-  fg[PRELIGHT] = { 0.67, 0.67, 0.67 }
-}
-
-style "background"
-{
-  bg[NORMAL] = { 1.0, 1.0, 1.0 }
-  bg[PRELIGHT] = { 0.67, 0.67, 0.67 }
-}
-
-style "steps"
-{
-  bg[NORMAL] = { 0, 0, 0 }
-  fg[NORMAL] = { 1.0, 1.0, 1.0 }
-}
-
-widget_class "*" style "any"
-widget_class "*GtkSpin*" style "entry"
-widget_class "*GtkEntry*" style "entry"
-widget_class "*Gtk*List*" style "entry"
-widget_class "*GtkCTree*" style "entry"
-widget_class "*GtkNotebook*" style "notebook"
-widget "*GtkButton*" style "button"
-widget "*background*" style "background"
diff --git a/perl-install/share/themes-blue.rc b/perl-install/share/themes-blue.rc
deleted file mode 100644
index 0c1e7d318..000000000
--- a/perl-install/share/themes-blue.rc
+++ /dev/null
@@ -1,62 +0,0 @@
-style "any"
-{
-  base[NORMAL]	  = { 0, 0, 0.67 }
-  bg[NORMAL]      = { 0, 0, 0.67 }
-  bg[INSENSITIVE] = { 0, 0, 0.67 }
-  base[INSENSITIVE]={ 0, 0, 0.67 }
-  bg[ACTIVE]      = { 0, 0.67, 1.0 }
-  bg[PRELIGHT]    = { 0, 0, 1.0 }
-  
-  text[NORMAL]	  = { 1.0, 1.0, 1.0 }
-  fg[NORMAL]  	  = { 1.0, 1.0, 1.0 }
-  fg[INSENSITIVE] = { 0.0, 0.0, 0.0 }
-  text[INSENSITIVE]={ 1.0, 1.0, 1.0 }
-  fg[ACTIVE]  	  = { 1.0, 1.0, 1.0 }
-  fg[PRELIGHT]    = { 1.0, 1.0, 1.0 }
-
-  bg[SELECTED] = { 1.0, 1.0, 1.0 }
-  fg[SELECTED] = { 0, 0, 1.0 }
-}
-
-style "entry"
-{
-  base[NORMAL] = { 0, 1.0, 1.0 }
-  base[ACTIVE] = { 0, 1.0, 1.0 }
-  fg[NORMAL]   = { 0.67, 0, 0.67 }
-}
-
-style "notebook"
-{
-  bg[NORMAL]      = { 0, 0, 1.0 }
-  bg[ACTIVE]      = { 0, 0, 0.67 }
-  fg[NORMAL]      = { 1.0, 1.0, 1.0 }
-}
-
-style "button" = "any"
-{
-  bg[NORMAL] = { 0, 0, 1.0 }
-  fg[NORMAL] = { 1.0, 1.0, 1.0 }
-  bg[PRELIGHT] = { 0, 0, 1.0 }
-  fg[PRELIGHT] = { 0, 1.0, 1.0 }
-}
-
-style "background"
-{
-  bg[NORMAL] = { 0, 0.67, 0.99 }
-  bg[PRELIGHT] = { 0, 0, 0.67 }
-}
-
-style "steps"
-{
-  bg[NORMAL] = { 0, 0, 1.0 }
-  fg[NORMAL] = { 1.0, 1.0, 0 }
-}
-
-widget_class "*" style "any"
-widget_class "*GtkSpin*" style "entry"
-widget_class "*GtkEntry*" style "entry"
-widget_class "*Gtk*List*" style "entry"
-widget_class "*GtkCTree*" style "entry"
-widget_class "*GtkNotebook*" style "notebook"
-widget "*GtkButton*" style "button"
-widget "*background*" style "background"
diff --git a/perl-install/share/themes-marble3d.rc b/perl-install/share/themes-marble3d.rc
deleted file mode 100644
index 1bbf48355..000000000
--- a/perl-install/share/themes-marble3d.rc
+++ /dev/null
@@ -1,208 +0,0 @@
-style "checkradiobutton" {
-  engine "pixmap" {
-    image 
-      {
-        function        = CHECK
-	recolorable     = TRUE
-	shadow          = OUT
-	overlay_file    = "marble3d-check1.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = CHECK
-	recolorable     = TRUE
-	shadow          = IN
-	overlay_file    = "marble3d-check2.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = OPTION
-	recolorable     = TRUE
-	shadow          = OUT
-	overlay_file    = "marble3d-check1.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = OPTION
-	recolorable     = TRUE
-	shadow          = IN
-	overlay_file    = "marble3d-check2.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = FOCUS
-	recolorable     = TRUE
-	overlay_file    = "focus.png"
-	overlay_border  = { 4, 4, 4, 4 }
-	overlay_stretch = TRUE
-      }
-  }
-}
-
-style "button"
-{
-  engine "pixmap" 
-    {
-    image 
-      {
-        function        = FOCUS
-	recolorable     = TRUE
-	overlay_file    = "focus.png"
-	overlay_border  = { 4, 4, 4, 4 }
-	overlay_stretch = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = NORMAL
-	detail          = "buttondefault"
-	shadow          = IN
-	file            = "marble3d-button_def.png"
-	border          = { 9, 9, 9, 9 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = NORMAL
-	shadow          = OUT
-	file            = "marble3d-button1.png"
-	border          = { 3, 3, 3, 3 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = PRELIGHT
-	shadow          = OUT
-	file            = "marble3d-button2.png"
-	border          = { 3, 3, 3, 3 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = NORMAL
-	shadow          = IN
-	file            = "marble3d-button4.png"
-	border          = { 2, 2, 2, 2 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = SELECTED
-	shadow          = IN
-	file            = "marble3d-button4.png"
-	border          = { 3, 3, 3, 3 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = ACTIVE
-	shadow          = IN
-	file            = "marble3d-button4.png"
-	border          = { 3, 3, 3, 3 }
-	stretch         = TRUE
-      }
-   }
-}
-
-style "window" 
-{
-  engine "pixmap" {
-    image 
-      {
-	function        = FLAT_BOX
-	recolorable     = TRUE
-	file            = "marble3d-bg1.png"
-	stretch         = FALSE
-      }
-  }
-}
-
-
-style "any"
-{
-  text[NORMAL]	  = { 0.00, 0.00, 0.00 }
-  fg[NORMAL]      = { 0.00, 0.00, 0.00 }
-  fg[PRELIGHT]    = { 0.25, 0.25, 0.25 }
-  fg[ACTIVE]      = { 0.00, 0.00, 0.00 }
-  fg[SELECTED]    = { 0.00, 0.00, 0.00 }
-  fg[INSENSITIVE] = { 0.50, 0.50, 0.50 }
-  
-  base[NORMAL]    = { 0.75, 0.75, 0.75 }
-  bg[NORMAL]      = { 0.80, 0.80, 0.80 }
-  bg[PRELIGHT]    = { 0.85, 0.85, 0.85 }
-  bg[ACTIVE]      = { 0.90, 0.90, 0.90 }
-  bg[SELECTED]    = { 0.90, 0.80, 0.70 }
-  bg[INSENSITIVE] = { 0.80, 0.75, 0.70 }
-}
-
-style "entry"
-{
-  base[NORMAL] = { 1.0, 1.0, 1.0 }
-  base[ACTIVE] = { 1.0, 1.0, 1.0 }
-  fg[NORMAL] = { 0, 0, 0 }
-}
-
-style "notebook"
-{
-  bg[NORMAL]	  = { 0.82, 0.8, 0.8 }
-  bg[ACTIVE]	  = { 0.72, 0.7, 0.7 }
-  fg[NORMAL]      = { 0, 0, 0 }
-}
-
-style "button" = "any"
-{
-  bg[NORMAL] = { 1.0, 1.0, 1.0 }
-  fg[NORMAL] = { 0, 0, 0 }
-  bg[PRELIGHT] = { 1.0, 1.0, 1.0 }
-  fg[PRELIGHT] = { 0.67, 0.67, 0.67 }
-}
-
-style "background"
-{
-  bg[NORMAL] = { 0.8, 0.8, 0.8 }
-  bg[PRELIGHT] = { 0.74, 0.72, 0.7 }
-}
-
-
-style "steps"
-{
-  fg[NORMAL] = { 0.40, 0.30, 0.20 }
-
-  engine "pixmap" {
-    image 
-      {
-	function        = FLAT_BOX
-	recolorable     = TRUE
-	file            = "marble3d-bg1.png"
-	stretch         = FALSE
-      }
-  }
-}
-
-widget_class "GtkWindow" style "window"
-widget_class "*" style "any"
-widget_class "*GtkSpin*" style "entry"
-widget_class "*GtkEntry*" style "entry"
-widget_class "*Gtk*List*" style "entry"
-widget_class "*GtkCTree*" style "entry"
-widget_class "*GtkNotebook*" style "notebook"
-widget "*GtkButton" style "button"
-widget "*background*" style "background"
-
-class "GtkRadioButton" style "checkradiobutton"
-class "GtkCheckButton" style "checkradiobutton"
diff --git a/perl-install/share/themes-mdk-Desktop.rc b/perl-install/share/themes-mdk-Desktop.rc
deleted file mode 100644
index 12ecb86b5..000000000
--- a/perl-install/share/themes-mdk-Desktop.rc
+++ /dev/null
@@ -1,203 +0,0 @@
-style "checkradiobutton" {
-  engine "pixmap" {
-    image 
-      {
-        function        = CHECK
-	recolorable     = TRUE
-	shadow          = OUT
-	overlay_file    = "mdk-check_off.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = CHECK
-	recolorable     = TRUE
-	shadow          = IN
-	overlay_file    = "mdk-check_on.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = OPTION
-	recolorable     = TRUE
-	shadow          = OUT
-	overlay_file    = "mdk-toggle_off.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = OPTION
-	recolorable     = TRUE
-	shadow          = IN
-	overlay_file    = "mdk-toggle_on.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = FOCUS
-	recolorable     = TRUE
-	overlay_file    = "focus.png"
-	overlay_border  = { 4, 4, 4, 4 }
-	overlay_stretch = TRUE
-      }
-  }
-}
-
-style "button"
-{
-  bg[NORMAL] = "#909090"
-
-  engine "pixmap" 
-    {
-    image 
-      {
-        function        = FOCUS
-	recolorable     = TRUE
-	overlay_file    = "focus.png"
-	overlay_border  = { 4, 4, 4, 4 }
-	overlay_stretch = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = NORMAL
-	detail          = "buttondefault"
-	shadow          = IN
-	file            = "blueHeart-button_def.png"
-	border          = { 9, 9, 9, 9 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = NORMAL
-	shadow          = OUT
-	file            = "mdk-button1.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = PRELIGHT
-	shadow          = OUT
-	file            = "mdk-button1.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = NORMAL
-	shadow          = IN
-	file            = "mdk-button4.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = SELECTED
-	shadow          = IN
-	file            = "mdk-button4.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = ACTIVE
-	shadow          = IN
-	file            = "mdk-button4.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-   }
-}
-
-style "window" 
-{
-  engine "pixmap" {
-    image 
-      {
-	function        = FLAT_BOX
-	recolorable     = TRUE
-	file            = "mdk-Desktop-bg.png"
-	stretch         = FALSE
-      }
-  }
-}
-
-style "any"
-{
-  base[NORMAL]	  = { 0.6, 0.6, 0.8 }
-  bg[NORMAL]      = { 0.6, 0.6, 0.8 }
-  bg[INSENSITIVE] = { 0.2, 0.2, 0.4 }
-  base[INSENSITIVE]={ 0.2, 0.2, 0.4 }
-  bg[ACTIVE]      = { 0.2, 0.2, 0.4 }
-  bg[PRELIGHT]    = { 0.4, 0.4, 0.6 }
-  
-  text[NORMAL]	  = { 0, 0, 0 }
-  fg[NORMAL]  	  = { 1.0, 1.0, 1.0 }
-  fg[INSENSITIVE] = { 0.0, 0.0, 0.0 }
-  text[INSENSITIVE]={ 1.0, 1.0, 1.0 }
-  fg[ACTIVE]  	  = { 1.0, 1.0, 1.0 }
-  fg[PRELIGHT]    = { 0.8, 0.8, 1.0 }
-
-  bg[SELECTED] = { 1.0, 1.0, 1.0 }
-  fg[SELECTED] = { 0.6, 0.6, 0.8 }
-}
-
-style "entry"
-{
-  base[NORMAL] = { 0.4, 0.4, 0.6 }
-  base[ACTIVE] = { 0.4, 0.4, 0.6 }
-  fg[NORMAL]   = { 1.0, 1.0, 1.0 }
-}
-
-style "notebook"
-{
-  bg[NORMAL]      = { 0.4, 0.4, 0.6 }
-  bg[ACTIVE]      = { 0.2, 0.2, 0.4 }
-  fg[NORMAL]      = { 1.0, 1.0, 1.0 }
-}
-
-style "button" = "any"
-{
-  bg[NORMAL] = { 0.4, 0.4, 0.6 }
-  fg[NORMAL] = { 1.0, 1.0, 1.0 }
-  bg[PRELIGHT] = { 0.36, 0.36, 0.56 }
-  fg[PRELIGHT] = { 0.8, 0.8, 1.0 }
-}
-
-style "background"
-{
-  bg[NORMAL] = { 0.2, 0.2, 0.4 }
-  bg[PRELIGHT] = { 0.8, 0.8, 0.99 }
-}
-
-style "steps"
-{
-  engine "pixmap" { image { function = FLAT_BOX } }
-  bg[NORMAL] = { 0.4, 0.4, 0.6 }
-  fg[NORMAL] = { 1.0, 1.0, 1.0 }
-}
-
-widget_class "GtkWindow" style "window"
-widget_class "*" style "any"
-widget_class "*GtkSpin*" style "entry"
-widget_class "*GtkEntry*" style "entry"
-widget_class "*Gtk*List*" style "entry"
-widget_class "*GtkCTree*" style "entry"
-widget_class "*GtkNotebook*" style "notebook"
-widget "*GtkButton" style "button"
-widget "*background*" style "background"
-
-class "GtkRadioButton" style "checkradiobutton"
-class "GtkCheckButton" style "checkradiobutton"
diff --git a/perl-install/share/themes-mdk.rc b/perl-install/share/themes-mdk.rc
deleted file mode 100644
index ca17576d3..000000000
--- a/perl-install/share/themes-mdk.rc
+++ /dev/null
@@ -1,225 +0,0 @@
-style "checkradiobutton" {
-  engine "pixmap" {
-    image 
-      {
-        function        = CHECK
-	recolorable     = TRUE
-	shadow          = OUT
-	overlay_file    = "mdk-check_off.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = CHECK
-	recolorable     = TRUE
-	shadow          = IN
-	overlay_file    = "mdk-check_on.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = OPTION
-	recolorable     = TRUE
-	shadow          = OUT
-	overlay_file    = "mdk-toggle_off.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = OPTION
-	recolorable     = TRUE
-	shadow          = IN
-	overlay_file    = "mdk-toggle_on.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = FOCUS
-	recolorable     = TRUE
-	overlay_file    = "focus.png"
-	overlay_border  = { 4, 4, 4, 4 }
-	overlay_stretch = TRUE
-      }
-  }
-}
-
-style "button"
-{
-  bg[NORMAL] = "#909090"
-
-  engine "pixmap" 
-    {
-    image 
-      {
-        function        = FOCUS
-	recolorable     = TRUE
-	overlay_file    = "focus.png"
-	overlay_border  = { 4, 4, 4, 4 }
-	overlay_stretch = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = NORMAL
-	detail          = "buttondefault"
-	shadow          = IN
-	file            = "blueHeart-button_def.png"
-	border          = { 9, 9, 9, 9 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = NORMAL
-	shadow          = OUT
-	file            = "mdk-button1.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = PRELIGHT
-	shadow          = OUT
-	file            = "mdk-button1.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = NORMAL
-	shadow          = IN
-	file            = "mdk-button4.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = SELECTED
-	shadow          = IN
-	file            = "mdk-button4.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = ACTIVE
-	shadow          = IN
-	file            = "mdk-button4.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-   }
-}
-
-style "window" 
-{
-  engine "pixmap" {
-    image 
-      {
-	function        = FLAT_BOX
-	recolorable     = TRUE
-	file            = "mdk-bg.png"
-	stretch         = FALSE
-      }
-  }
-}
-
-style "any"
-{
-base[NORMAL] = { 0.13, 0.27, 0.61 }
-bg[NORMAL] = { 0.13, 0.27, 0.61 }
-bg[INSENSITIVE] = { 0.46, 0.51, 0.74 }
-base[INSENSITIVE] = { 0.46, 0.51, 0.74 }
-bg[ACTIVE] = { 0.46, 0.51, 0.74 }
-bg[PRELIGHT] = { 0.17, 0.33, 0.75 }
-  
-text[NORMAL] = { 1.0, 1.0, 1.0 }
-fg[NORMAL] = { 1.0, 1.0, 1.0 }
-fg[INSENSITIVE] = { 1.0, 1.0, 1.0 }
-text[INSENSITIVE] = { 1.0, 1.0, 1.0 }
-fg[ACTIVE] = { 1.0, 1.0, 1.0 }
-fg[PRELIGHT] = { 0.72, 0.74, 0.86 }
-
-bg[SELECTED] = { 1.0, 1.0, 1.0 }
-fg[SELECTED] = { 0.13, 0.27, 0.61 }
-}
-
-style "drawing"
-{
-base[NORMAL] = { 0.29, 0.38, 0.67 }
-bg[NORMAL] = { 0.29, 0.38, 0.67 }
-bg[INSENSITIVE] = { 0.13, 0.27, 0.61 }
-base[INSENSITIVE] = { 0.13, 0.27, 0.61 }
-bg[ACTIVE] = { 0.13, 0.27, 0.61 }
-bg[PRELIGHT] = { 0.29, 0.38, 0.67 }
-  
-bg[SELECTED] = { 1.0, 1.0, 1.0 }
-fg[SELECTED] = { 1.0, 1.0, 1.0 }
-}
-
-style "entry"
-{
-base[NORMAL] = { 0.29, 0.38, 0.67 }
-base[ACTIVE] = { 0.13, 0.27, 0.61 }
-fg[NORMAL] = { 1.0, 1.0, 1.0 }
-}
-
-style "tooltips"
-{
-base[NORMAL] = { 0.96, 0.81, 0.21 }
-base[ACTIVE] = { 0.96, 0.81, 0.21 }
-fg[NORMAL] = { 0, 0, 0 }
-}
-
-style "notebook"
-{
-bg[NORMAL] = { 0.29, 0.38, 0.67 }
-bg[ACTIVE] = { 0.13, 0.27, 0.61 }
-fg[NORMAL] = { 1.0, 1.0, 1.0 }
-}
-
-style "button" = "any"
-{
-bg[NORMAL] = { 0.13, 0.27, 0.61 }
-fg[NORMAL] = { 1.0, 1.0, 1.0 }
-bg[PRELIGHT] = { 0.46, 0.51, 0.74 }
-fg[PRELIGHT] = { 0.72, 0.74, 0.86 }
-}
-
-style "background"
-{
-bg[NORMAL] = { 0.29, 0.38, 0.67 }
-bg[PRELIGHT] = { 0.72, 0.74, 0.86 }
-}
-
-style "steps"
-{
-  engine "pixmap" { image { function = FLAT_BOX } }
-bg[NORMAL] = { 0.29, 0.38, 0.67 }
-fg[NORMAL] = { 1.0, 1.0, 1.0 }
-}
-
-widget_class "GtkWindow" style "window"
-widget_class "*" style "any"
-widget_class "*GtkSpin*" style "entry"
-widget_class "*GtkEntry*" style "entry"
-widget_class "*Gtk*List*" style "entry"
-widget_class "*GtkCTree*" style "entry"
-widget_class "*GtkTooltips*" style "tooltips"
-widget_class "*GtkDrawingArea*" style "drawing"
-widget_class "*GtkNotebook*" style "notebook"
-widget "*GtkButton" style "button"
-widget "*background*" style "background"
-
-class "GtkRadioButton" style "checkradiobutton"
-class "GtkCheckButton" style "checkradiobutton"
diff --git a/perl-install/share/themes-savane.rc b/perl-install/share/themes-savane.rc
deleted file mode 100644
index aed22ac41..000000000
--- a/perl-install/share/themes-savane.rc
+++ /dev/null
@@ -1,62 +0,0 @@
-style "any"
-{
-  base[NORMAL]	  = { 0.67, 0.33, 0 }
-  bg[NORMAL]	  = { 0.67, 0.33, 0 }
-  bg[INSENSITIVE] = { 0.67, 0.33, 0 }
-  base[INSENSITIVE]={ 0.67, 0.33, 0 }
-  bg[ACTIVE]	  = { 1.0, 0.67, 0 }
-  bg[PRELIGHT]	  = { 1.0, 1.0, 0 }
-  
-  text[NORMAL]	  = { 1.0, 1.0, 1.0 }
-  fg[NORMAL]	  = { 1.0, 1.0, 1.0 }
-  fg[ACTIVE]	  = { 0, 0, 0 }
-  fg[PRELIGHT]	  = { 0, 0, 0 }
-  fg[INSENSITIVE] = { 0, 0, 0 }
-  text[INSENSITIVE]={ 0, 0, 0 }
-
-  bg[SELECTED]    = { 1.0, 1.0, 1.0 }
-  fg[SELECTED]    = { 0.67, 0.33, 0 }
-}
-
-style "entry"
-{
-  base[NORMAL] = { 1.0, 1.0, 1.0 }
-  base[ACTIVE] = { 1.0, 1.0, 1.0 }
-  fg[NORMAL] = { 0, 0, 0 }
-}
-
-style "notebook"
-{
-  bg[NORMAL]	  = { 1.0, 0.67, 0 }
-  bg[ACTIVE]	  = { 0.67, 0.33, 0 }
-  fg[NORMAL]      = { 0, 0, 0 }
-}
-
-style "button" = "any"
-{
-  bg[NORMAL] = { 1.0, 0.67, 0 }
-  fg[NORMAL] = { 0, 0, 0 }
-  bg[PRELIGHT] = { 1.0, 1.0, 0 }
-  fg[PRELIGHT] = { 0, 0, 0 }
-}
-
-style "background"
-{
-  bg[NORMAL] = { 1.0, 0.67, 0 }
-  bg[PRELIGHT] = { 0.67, 0.33, 0 }
-}
-
-style "steps"
-{
-  bg[NORMAL] = { 0, 0, 0 }
-  fg[NORMAL] = { 1.0, 1.0, 1.0 }
-}
-
-widget_class "*" style "any"
-widget_class "*GtkSpin*" style "entry"
-widget_class "*GtkEntry*" style "entry"
-widget_class "*Gtk*List*" style "entry"
-widget_class "*GtkCTree*" style "entry"
-widget_class "*GtkNotebook*" style "notebook"
-widget "*GtkButton*" style "button"
-widget "*background*" style "background"
diff --git a/perl-install/share/themes.rc b/perl-install/share/themes.rc
deleted file mode 100644
index 3f432e690..000000000
--- a/perl-install/share/themes.rc
+++ /dev/null
@@ -1,36 +0,0 @@
-style "mdk"
-{
-bg[NORMAL] = { 0.3, 0.38, 0.67 }
-bg[PRELIGHT] = { 0.45, 0.51, 0.74 }
-}
-style "marble3d"
-{
-bg[NORMAL] = { 0.8, 0.8, 0.8 }
-bg[PRELIGHT] = { 0.9, 0.9, 0.9 }
-}
-style "DarkMarble"
-{
-bg[NORMAL] = { 0.4, 0.45, 0.4 }
-bg[PRELIGHT] = { 0.5, 0.55, 0.5 }
-}
-style "savane"
-{
-bg[NORMAL] = { 1.0, 0.67, 0 }
-bg[PRELIGHT] = { 0.67, 0.33, 0 }
-}
-style "blackwhite"
-{
-bg[NORMAL] = { 0.67, 0.67, 0.67 }
-bg[PRELIGHT] = { 1.0, 1.0, 1.0 }
-}
-style "blue"
-{
-bg[NORMAL] = { 0, 0, 0.67 }
-bg[PRELIGHT] = { 0, 0, 1.0 }
-}
-widget "*mdk*" style "mdk"
-widget "*marble3d*" style "marble3d"
-widget "*DarkMarble*" style "DarkMarble"
-widget "*savane*" style "savane"
-widget "*blackwhite*" style "blackwhite"
-widget "*blue*" style "blue"
diff --git a/perl-install/share/themes/blueHeart-button_def.png b/perl-install/share/themes/blueHeart-button_def.png
deleted file mode 100644
index b35781416..000000000
--- a/perl-install/share/themes/blueHeart-button_def.png
+++ /dev/null
diff --git a/perl-install/share/themes/focus.png b/perl-install/share/themes/focus.png
deleted file mode 100644
index 70afb1797..000000000
--- a/perl-install/share/themes/focus.png
+++ /dev/null
diff --git a/perl-install/share/themes/marble3d-bg1.png b/perl-install/share/themes/marble3d-bg1.png
deleted file mode 100644
index b4e1afd66..000000000
--- a/perl-install/share/themes/marble3d-bg1.png
+++ /dev/null
diff --git a/perl-install/share/themes/marble3d-button1.png b/perl-install/share/themes/marble3d-button1.png
deleted file mode 100644
index 9119ac89c..000000000
--- a/perl-install/share/themes/marble3d-button1.png
+++ /dev/null
diff --git a/perl-install/share/themes/marble3d-button2.png b/perl-install/share/themes/marble3d-button2.png
deleted file mode 100644
index 70696538c..000000000
--- a/perl-install/share/themes/marble3d-button2.png
+++ /dev/null
diff --git a/perl-install/share/themes/marble3d-button4.png b/perl-install/share/themes/marble3d-button4.png
deleted file mode 100644
index 7b6aae23a..000000000
--- a/perl-install/share/themes/marble3d-button4.png
+++ /dev/null
diff --git a/perl-install/share/themes/marble3d-button_def.png b/perl-install/share/themes/marble3d-button_def.png
deleted file mode 100644
index 4bd67d0d9..000000000
--- a/perl-install/share/themes/marble3d-button_def.png
+++ /dev/null
diff --git a/perl-install/share/themes/marble3d-check1.png b/perl-install/share/themes/marble3d-check1.png
deleted file mode 100644
index f3c31d09c..000000000
--- a/perl-install/share/themes/marble3d-check1.png
+++ /dev/null
diff --git a/perl-install/share/themes/marble3d-check2.png b/perl-install/share/themes/marble3d-check2.png
deleted file mode 100644
index 5261472f9..000000000
--- a/perl-install/share/themes/marble3d-check2.png
+++ /dev/null
diff --git a/perl-install/share/themes/mdk-Desktop-bg.png b/perl-install/share/themes/mdk-Desktop-bg.png
deleted file mode 100644
index 14db97364..000000000
--- a/perl-install/share/themes/mdk-Desktop-bg.png
+++ /dev/null
diff --git a/perl-install/share/themes/mdk-bg.png b/perl-install/share/themes/mdk-bg.png
deleted file mode 100644
index 69754ee04..000000000
--- a/perl-install/share/themes/mdk-bg.png
+++ /dev/null
diff --git a/perl-install/share/themes/mdk-button1.png b/perl-install/share/themes/mdk-button1.png
deleted file mode 100644
index bc4d2e674..000000000
--- a/perl-install/share/themes/mdk-button1.png
+++ /dev/null
diff --git a/perl-install/share/themes/mdk-button4.png b/perl-install/share/themes/mdk-button4.png
deleted file mode 100644
index e85c86748..000000000
--- a/perl-install/share/themes/mdk-button4.png
+++ /dev/null
diff --git a/perl-install/share/themes/mdk-check_off.png b/perl-install/share/themes/mdk-check_off.png
deleted file mode 100644
index 8579fdc9a..000000000
--- a/perl-install/share/themes/mdk-check_off.png
+++ /dev/null
diff --git a/perl-install/share/themes/mdk-check_on.png b/perl-install/share/themes/mdk-check_on.png
deleted file mode 100644
index 0dfc7468b..000000000
--- a/perl-install/share/themes/mdk-check_on.png
+++ /dev/null
diff --git a/perl-install/share/themes/mdk-toggle_off.png b/perl-install/share/themes/mdk-toggle_off.png
deleted file mode 100644
index da48f81d1..000000000
--- a/perl-install/share/themes/mdk-toggle_off.png
+++ /dev/null
diff --git a/perl-install/share/themes/mdk-toggle_on.png b/perl-install/share/themes/mdk-toggle_on.png
deleted file mode 100644
index 0b1844d04..000000000
--- a/perl-install/share/themes/mdk-toggle_on.png
+++ /dev/null
diff --git a/perl-install/share/verify_modules.pl b/perl-install/share/verify_modules.pl
deleted file mode 100755
index 52b6ae8fc..000000000
--- a/perl-install/share/verify_modules.pl
+++ /dev/null
@@ -1,102 +0,0 @@
-#!/usr/bin/perl
-
-use lib "..";
-use common;
-use modules;
-
-my $all = $ARGV[0] eq '-a';
-
-my %modules = map {
-    chomp;
-    my @l = split "\t";
-    my $mod = $l[-2];
-    $mod =~ s/"(.*)"/$1/;
-    if_(!/^\s*#/ && $mod !~ /:/ && $mod ne 'unknown', $mod => $l[-1])
-} map { cat_("/usr/share/ldetect-lst/$_") } 'pcitable', 'usbtable';
-
-my %l;
-my $kernel = $all ? '/lib/modules' : '../../kernel';
-foreach (`find $kernel -name "*.o" -o -name "*.o.gz"`) {
-    s|.*/lib/modules/.*?/||;
-    s|kernel/drivers/||;
-    m|(.*)/(.*)\.o(\.gz)?$|;
-    $l{$2} = $1;
-}
-
-foreach (keys %modules) {
-    my $ktype = $l{$_};
-    my $dtype = $modules::drivers{$_};
-    if (!$ktype && !$dtype) {
-	print "unused module $_ (descr $modules{$_}) (not in modules.pm nor in the kernel)\n";
-    } elsif (!$dtype) {
-	$missing{$_} = $ktype;
-    } elsif (!$ktype) {
-	$unused{$_} = $dtype->{type} 
-	  if !member($dtype->{type}, 'sound');
-    }
-}
-
-foreach (sort keys %missing) {
-    print "missing $_ in modules.pm (type $missing{$_}, descr $modules{$_})\n";
-}
-foreach (sort keys %unused) {
-    print "unused module $_ (type $unused{$_}) (not in the kernel)\n";
-}
-
-__END__
-my %m = %l;
-my (%missing, %missing2);
-while (my ($k, $v) = each %pci_probing::pcitable::ids) {
-    next if $v->[1] =~ /^(unknown$|ignore$|Card:|Server:|Bad:)/;
-
-    $l{$v->[1]} or $missing{$v->[1]} = 1;
-    $modules::drivers{$v->[1]} or push @{$missing2{$v->[1]}}, $v->[0];
-    delete $m{$v->[1]};
-}
-print "W: unused entry in modules.pm $_\n" 
-  foreach grep { !$l{$_} && !$missing{$_} #- will be reported below
-	     } keys %modules::drivers;
-
-print qq|W: missing entry in modules.pm for $l{$_} "$_"\n| foreach grep { !$modules::drivers{$_} } keys %l;
-
-my %known; @known{qw(net scsi misc)} = ();
-if ($ARGV[0] eq "-v") {
-    print "W: has no pci entry: $_ \n" foreach grep { exists $known{$m{$_}} } keys %m;
-}
-
-print "E: missing module $_\n" 
-  foreach grep { $modules::drivers{$_}{type} ne "sound" #- don't care about sound modules
-	     } keys %missing;
-
-foreach (keys %missing2) {
-    print qq|E: missing entry in modules.pm for $l{$_} "$_"|;
-    print qq| => "|, join("<>", @{$missing2{$_}}), '"';
-    print "\n";
-}
-
-#exit;
-
-my %devices_c = (
-  net => "checkEthernetDev, DRIVER_NET, DRIVER_MINOR_ETHERNET",
-  scsi => "checkSCSIDev, DRIVER_SCSI, DRIVER_MINOR_NONE",
-  disk => "checkSCSIDev, DRIVER_SCSI, DRIVER_MINOR_NONE",
-  pcmcia => "NULL, DRIVER_PCMCIA, DRIVER_MINOR_NONE",
-  paride => "NULL, DRIVER_PARIDE, DRIVER_MINOR_NONE",
-  cdrom => "NULL, DRIVER_CDROM, DRIVER_MINOR_NONE",
-);
-my $devices_c = join "|", keys %devices_c;
-
-my %drivers = %modules::drivers;
-$drivers{$_}{type} =~ /$devices_c/ or delete $drivers{$_} foreach keys %drivers;
-foreach (cat_("../../install/devices.c")) {
-    if (/static struct driver drivers/ .. /^};/) {
-	/\s*{\s*"[^"]*"\s*,\s*"(.*)"/ or next;
-	delete $drivers{$1} or print qq|W: unused entry in devices.c $1\n|;
-    }
-}
-foreach (sort { $drivers{$a}{type} cmp $drivers{$b}{type} } keys %drivers) {
-    my ($m, $v) = ($_, $drivers{$_});
-    /^(8390|sunrpc|lockd|dummy|st)$/ and next;
-
-    print qq|E: missing entry in devices.c { "$v->{text}", "$m", 0, $devices_c{$v->{type}} }\n|;
-}
diff --git a/perl-install/share/wizard.rc b/perl-install/share/wizard.rc
deleted file mode 100644
index cad898c2a..000000000
--- a/perl-install/share/wizard.rc
+++ /dev/null
@@ -1,172 +0,0 @@
-style "button"
-{
-  bg[NORMAL] = "#909090"
-}
-
-style "window" 
-{
-}
-
-style "any"
-{
-  base[NORMAL]	  = { 0.2, 0.2, 0.4 }
-  bg[NORMAL]      = { 0.2, 0.2, 0.4 }
-  bg[INSENSITIVE] = { 0.6, 0.6, 0.8 }
-  base[INSENSITIVE]={ 0.6, 0.6, 0.8 }
-  bg[ACTIVE]      = { 0.6, 0.6, 0.8 }
-  bg[PRELIGHT]    = { 0.4, 0.4, 0.6 }
-  
-  text[NORMAL]	  = { 1.0, 1.0, 1.0 }
-  fg[NORMAL]  	  = { 1.0, 1.0, 1.0 }
-  fg[INSENSITIVE] = { 0.0, 0.0, 0.0 }
-  text[INSENSITIVE]={ 1.0, 1.0, 1.0 }
-  fg[ACTIVE]  	  = { 0.8, 0.8, 1.0 }
-  fg[PRELIGHT]    = { 1.0, 1.0, 1.0 }
-
-  bg[SELECTED] = { 1.0, 1.0, 1.0 }
-  fg[SELECTED] = { 0.2, 0.2, 0.4 }
-}
-
-style "entry"
-{
-  base[NORMAL] = { 0.4, 0.4, 0.6 }
-  base[ACTIVE] = { 0.4, 0.4, 0.6 }
-  fg[NORMAL]   = { 1.0, 1.0, 1.0 }
-}
-
-style "notebook"
-{
-  bg[NORMAL]      = { 0.4, 0.4, 0.6 }
-  bg[ACTIVE]      = { 0.2, 0.2, 0.4 }
-  fg[NORMAL]      = { 1.0, 1.0, 1.0 }
-}
-
-style "button" = "any"
-{
-  bg[NORMAL] = { 0.4, 0.4, 0.6 }
-  fg[NORMAL] = { 1.0, 1.0, 1.0 }
-  bg[PRELIGHT] = { 0.36, 0.36, 0.56 }
-  fg[PRELIGHT] = { 0.8, 0.8, 1.0 }
-}
-
-style "background"
-{
-  bg[NORMAL] = { 0.6, 0.6, 0.8 }
-  bg[PRELIGHT] = { 0.8, 0.8, 0.99 }
-}
-
-widget_class "GtkWindow" style "window"
-widget_class "*" style "any"
-widget_class "*GtkSpin*" style "entry"
-widget_class "*GtkEntry*" style "entry"
-widget_class "*Gtk*List*" style "entry"
-widget_class "*GtkCTree*" style "entry"
-widget_class "*GtkNotebook*" style "notebook"
-widget "*GtkButton" style "button"
-widget "*background*" style "background"
-
-
-#  style "font"
-#  {
-#    fontset = "-*-*-medium-r-normal-*-8-*-*-*-*-*-iso8859-1,*-r-*"
-#  }
-
-#  style "any"
-#  {
-#    bg[NORMAL] = { 0.7, 0.8, 0.2 }
-#    bg[PRELIGHT] = { 0.9, 0.9, 0.9 }
-#  }
-
-#  #  style "any"
-#  #  {
-#  #  #  fontset = "-adobe-helvetica-medium-r-normal--12-120-75-75-p-67-iso8859-1"
-#  #    bg[NORMAL] = { 1.0, 1.0, 1.0 }
-#  #    bg[SELECTED] = { 0.0, 0.8, 0.3 }
-#  #    bg[INSENSITIVE] = { 1.0, 1.0, 1.0 }
-#  #    bg[ACTIVE] = { 1.0, 1.0, 1.0 }
-#  #    bg[PRELIGHT] = { 1.0, 1.0, 1.0 }
-
-#  #    base[NORMAL] = { 1.0, 1.0, 1.0 }
-#  #    base[SELECTED] = { 1.0, 1.0, 1.0 }
-#  #    base[INSENSITIVE] = { 1.0, 1.0, 1.0 }
-#  #    base[ACTIVE] = { 1.0, 1.0, 1.0 }
-#  #    base[PRELIGHT] = { 1.0, 1.0, 1.0 }
-
-#  #    text[NORMAL] = { 0.0, 0.0, 0.0 }
-#  #    text[SELECTED] = { 0.0, 0.0, 0.0 }
-#  #    text[INSENSITIVE] = { 0.0, 0.0, 0.0 }
-#  #    text[ACTIVE] = { 0.0, 0.0, 0.0 }
-#  #    text[PRELIGHT] = { 0.0, 0.0, 0.0 }
-
-#  #    fg[NORMAL] = { 0.0, 0.0, 0.0 }
-#  #    fg[SELECTED] = { 0.8, 0.8, 0.8 }
-#  #    fg[INSENSITIVE] = { 1.0, 1.0, 0.0 }
-#  #    fg[ACTIVE] = { 1.0, 1.0, 0.0 }
-#  #    fg[PRELIGHT] = { 0.0, 0.3, 0.8 }
-
-#  #  }
-
-#  style "area" = "font"
-#  {
-#    bg[NORMAL] = { 1.0, 1.0, 1.0 }
-#    bg[PRELIGHT] = { 0.8, 0.8, 0.8 }
-#  }
-
-#  style "red" = "font"
-#  {
-#    bg[NORMAL] = { 1.0, 0, 0 }
-#    bg[PRELIGHT] = { 0.9, 0, 0 }
-#  }
-#  style "darkred" = "font"
-#  {
-#    bg[NORMAL] = { 0.7, 0, 0 }
-#    bg[PRELIGHT] = { 0.6, 0, 0 }
-#  }
-#  style "green" = "font"
-#  {
-#    bg[NORMAL] = { 0, 1.0, 0 }
-#    bg[PRELIGHT] = { 0, 0.9, 0 }
-#    fg[NORMAL] = { 0, 0, 0 }
-#  }
-#  style "blue" = "font"
-#  {
-#    bg[NORMAL] = { 0, 0, 1.0 }
-#    bg[PRELIGHT] = { 0, 0, 0.9 }
-#  }
-#  style "white" = "font"
-#  {
-#    bg[NORMAL] = { 1.0, 1.0, 1.0 }
-#    bg[PRELIGHT] = { 0.67, 0.67, 0.67 }
-#    fg[NORMAL] = { 0, 0, 0 }
-#  }
-
-#  #widget_class "GtkWindow" style "window"
-#  #widget_class "*abel*" style "any"
-#  widget_class "*" style "any"
-#  widget_class "*Area*" style "area"
-#  #widget_class "*GtkSpin*" style "entry"
-#  #widget_class "*GtkEntry*" style "entry"
-#  #widget_class "*Gtk*List*" style "entry"
-#  #widget_class "*GtkCTree*" style "entry"
-#  #widget_class "*GtkNotebook*" style "notebook"
-#  #widget "*GtkButton" style "button"
-#  #widget "*background*" style "background"
-
-#  #class "GtkRadioButton" style "checkradiobutton"
-#  #class "GtkCheckButton" style "checkradiobutton"
-
-
-#  #widget_class "GtkWindow" style "window"
-#  #widget_class "*Area*" style "any"
-#  #widget_class "*abel*" style "any"
-#  #class "*" style "any"
-#  #widget_class "*GtkSpin*" style "entry"
-#  #widget_class "*GtkEntry*" style "entry"
-#  #widget_class "*Gtk*List*" style "entry"
-#  #widget_class "*GtkCTree*" style "entry"
-#  #widget_class "*GtkNotebook*" style "notebook"
-#  #widget "*GtkButton" style "button"
-#  #widget "*background*" style "background"
-
-#  #class "GtkRadioButton" style "checkradiobutton"
-#  #class "GtkCheckButton" style "checkradiobutton"
diff --git a/perl-install/standalone.pm b/perl-install/standalone.pm
deleted file mode 100644
index eea2cf5ca..000000000
--- a/perl-install/standalone.pm
+++ /dev/null
@@ -1,56 +0,0 @@
-package standalone; # $Id$
-
-use c;
-
-$::isStandalone = 1;
-
-$ENV{SHARE_PATH} ||= "/usr/share";
-
-c::setlocale();
-c::bindtextdomain('libDrakX', "/usr/share/locale");
-
-
-
-################################################################################
-package pkgs_interactive;
-
-sub interactive::do_pkgs {
-    my ($in) = @_;
-    bless { in => $in }, 'pkgs_interactive';
-}
-
-sub install {
-    my ($o, @l) = @_;
-    $o->{in}->suspend;
-    my $wait = $o->{in}->wait_message('', _("Installing packages..."));
-    my $ret = system('urpmi', '--allow-medium-change', '--auto', '--best-output', @l) == 0;
-    undef $wait;
-    $o->{in}->resume;
-    $ret;
-}
-
-sub is_installed {
-    my ($o, @l) = @_;
-    system('rpm', '-q', @l) == 0;
-}
-
-sub remove {
-    my ($o, @l) = @_;
-    $o->{in}->suspend;
-    my $ret = system('rpm', '-e', @l) == 0;
-    $o->{in}->resume;
-    $ret;
-}
-
-sub remove_nodeps {
-    my ($o, @l) = @_;
-    $o->{in}->suspend;
-    my $ret = system('rpm', '-e', '--nodeps', @l) == 0;
-    $o->{in}->resume;
-    $ret;
-}
-################################################################################
-
-package standalone;
-
-1;
diff --git a/perl-install/standalone/XFdrake b/perl-install/standalone/XFdrake
deleted file mode 100755
index 891722d50..000000000
--- a/perl-install/standalone/XFdrake
+++ /dev/null
@@ -1,96 +0,0 @@
-#!/usr/bin/perl
-
-# XFdrake
-# Copyright (C) 1999 MandrakeSoft (pixel@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use lib qw(/usr/lib/libDrakX);
-
-use interactive;
-use standalone;
-use modules;
-use Xconfigurator;
-use Xconfig;
-use c;
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: XFdrake [--xf3] [--beginner] [--expert] [--auto] [--noauto] [--skiptest] [--testing]\n";
-
-my $i = {};
-
-$::force_xf3 = /-xf3/;
-$::beginner = /-beginner/;
-$::expert = /-expert/;
-$::auto = /-auto/;
-$::noauto = /-noauto/;
-$::testing = /-testing/;
-$i->{skiptest} = /-skiptest/;
-
-my $in = 'interactive'->vnew('su', 'X');
-
--r '/etc/modules.conf' and modules::mergein_conf('/etc/modules.conf');
-
-my $f = "/usr/X11R6/lib/X11/rgb.txt"; #- this one is on all platform (instead of Cards ?)
-$in->do_pkgs->install('XFree86', 'XFree86-75dpi-fonts') if !-e $f;
--e $f or die "install XFree86 first!\n";
-
-`pidof xfs` > 0 or system("/etc/rc.d/init.d/xfs start") if !$i->{skiptest};
-
-system("mount /proc 2>/dev/null"); # ensure /proc is mounted for pci probing
-
-begin:
-Xconfig::getinfo($i);
-Xconfig::getinfoFromXF86Config($i); #- take default from here at least.
-
-my $allowNVIDIA_rpms;
-my (%list, %select);
-local *F;
-open F, "/var/lib/urpmi/depslist.ordered";
-while (<F>) {
-    /(.*NVIDIA.*)-([^-]*)-([^-]*)\s+/ and $list{$1} = 1;
-}
-close F;
-if ($list{NVIDIA_GLX}) {
-    eval {
-	my ($version, $release, $ext) = `uname -r` =~ /([^-]*)-([^-]*mdk)(\S*)/;
-	$ext and $ext = "-$ext";
-	$list{"NVIDIA_kernel-$version-$release$ext"} or die "no NVIDIA kernel for current kernel";
-	$select{"NVIDIA_kernel-$version-$release$ext"} = 1;
-	foreach (`rpm -q kernel kernel-smp kernel-entreprise kernel22 kernel22-smp kernel22-secure`) {
-	    ($ext, $version, $release) = /kernel[^-]*(-[^-]*)-([^-]*)-([^-]*mdk)/;
-	    $list{"NVIDIA_kernel-$version-$release$ext"} and $select{"NVIDIA_kernel-$version-$release$ext"} = 1;
-	}
-	$allowNVIDIA_rpms = [ keys(%select), "NVIDIA_GLX" ];
-    }
-}
-if (!$allowNVIDIA_rpms) {
-    my ($uname_r) = `uname -r` =~ /(\S+)/;
-    $allowNVIDIA_rpms = ((-e "/lib/modules/$uname_r/kernel/drivers/char/NVdriver.o.gz" ||
-			  -e "/lib/modules/$uname_r/kernel/drivers/char/NVdriver.o") &&
-			 -e "/usr/X11R6/lib/modules/drivers/nvidia_drv.o" &&
-			 -e "/usr/X11R6/lib/modules/extensions/libglx.so") && []; #- empty list but true.
-}
-
-$::isEmbedded and kill USR2, $::CCPID;
-Xconfigurator::main('', $i, $in, $in->do_pkgs, 
-		    { allowFB          => $::expert,
-		      allowNVIDIA_rpms => $allowNVIDIA_rpms });
-!$::isEmbedded and $in->exit(0);
-kill USR1, $::CCPID;
-goto begin;
diff --git a/perl-install/standalone/adduserdrake b/perl-install/standalone/adduserdrake
deleted file mode 100755
index d2893c850..000000000
--- a/perl-install/standalone/adduserdrake
+++ /dev/null
@@ -1,42 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-
-use common;
-use interactive;
-use standalone;
-use any;
-
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: adduserdrake [--beginner] [--expert] [<users...>]\n";
-
-$::beginner = /-beginner/;
-$::expert = /-expert/;
-
-my @etc_pass_fields = qw(name pw uid gid realname home shell);
-my @shells = grep { -x $_ } map { "/bin/$_" } qw(bash tcsh zsh ash ksh);
-my $isMD5 = cat_("/etc/pam.d/passwd") =~ /md5/;
-my $isShadow = cat_("/etc/pam.d/passwd") =~ /shadow/;
-
-
-my $users = []; 
-my $in;
-
-if (my @l = grep { ! /^-/ } @ARGV) {
-    $users = [ map { { name => $_, realname => $_ } } @l ];
-} else {
-    $in = 'interactive'->vnew('su', 'user');
-    any::ask_users('', $in, $users, $ENV{SECURE_LEVEL});
-}
-
-system("adduser", $_->{name}) foreach @$users;
-any::addUsers('', $users);
-
-any::write_passwd_user('', $_, $isMD5) foreach @$users;
-system("pwconv") if $isShadow;
-
-#$in->do_pkgs->install("autologin") if $o->{autologin};
-#any::set_autologin('', $o->{autologin}, $o->{desktop});
-
-$in->exit(0) if $in;
diff --git a/perl-install/standalone/diskdrake b/perl-install/standalone/diskdrake
deleted file mode 100755
index 4ae662a86..000000000
--- a/perl-install/standalone/diskdrake
+++ /dev/null
@@ -1,81 +0,0 @@
-#!/usr/bin/perl
-
-# DiskDrake
-# Copyright (C) 1999 MandrakeSoft (pixel@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# DiskDrake uses resize_fat which is a perl rewrite of the work of Andrew
-# Clausen (libresize).
-# DiskDrake is also based upon the libfdisk and the install from Red Hat Software
-
-
-use lib qw(/usr/lib/libDrakX);
-use common;
-use diskdrake_interactive;
-use standalone;
-use interactive;
-use detect_devices;
-use fsedit;
-use fs;
-use log;
-use c;
-
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-if ($::isEmbedded) {
-  print "EMBED\n";
-  print "parent XID\t$::XID\n";
-  print "mcc pid\t$::CCPID\n";
-}
-
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: diskdrake [--expert] [--testing]\n";
-
-$::expert = /-expert/;
-$::testing = /-testing/;
-
-if ($>) {
-    $ENV{PATH} = "/sbin:/usr/sbin:$ENV{PATH}";
-}
-
-
-my $in = 'interactive'->vnew('su');
-my ($all_hds) =
-    catch_cdie { fsedit::hds([ detect_devices::hds() ], {}) }
-    sub {
-	my ($err) = $@ =~ /(.*) at /;
-	$@ =~ /overlapping/ and $in->ask_warn('', $@), return 1;
-	$in->ask_okcancel(_("Error"),
-[_("I can't read your partition table, it's too corrupted for me :(
-I'll try to go on blanking bad partitions"), $err]);
-    };
-
-$SIG{__DIE__} = sub { my $m = chomp_($_[0]); log::l("ERROR: $m") };
-my $fstab = [ fsedit::get_all_fstab($all_hds) ];
-
-fs::get_raw_hds('', $all_hds);
-
-fs::merge_info_from_fstab([ fsedit::get_really_all_fstab($all_hds) ]);
-fs::merge_info_from_mtab([ fsedit::get_really_all_fstab($all_hds) ]);
-
-if ($ENV{TEST_DEFAULT_OPTIONS}) {
-    fs::set_all_default_options($all_hds);
-    fs::set_removable_mntpoints($all_hds);
-}
-diskdrake_interactive::main($in, $all_hds);
-
-$in->exit(0);
diff --git a/perl-install/standalone/drakautoinst b/perl-install/standalone/drakautoinst
deleted file mode 100755
index c0d640135..000000000
--- a/perl-install/standalone/drakautoinst
+++ /dev/null
@@ -1,410 +0,0 @@
-#!/usr/bin/perl
-
-#
-# Guillaume Cottenceau (gc@mandrakesoft.com)
-#
-# Copyright 2001 MandrakeSoft
-#
-# This software may be freely redistributed under the terms of the GNU
-# public license.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-
-use lib qw(/usr/lib/libDrakX);
-
-use common;
-use interactive;
-use standalone;
-use devices;
-use detect_devices;
-use steps;
-use commands;
-use fs;
-use Data::Dumper;
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-
-
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: drakautoinst [--version]\n";
-/-version/ and die 'version: $Id$ '."\n";
-$::direct = /-direct/;
-$::direct = 1; #DEBUG
-
-my $in = 'interactive'->vnew('su', 'default');
-
-begin:
-$::isEmbedded and kill USR2, $::CCPID;
-
-my $imagefile = "/root/replay_install.img";
--f $imagefile or $in->ask_okcancel(_("Error!"), 
-				   _("I can't find needed image file `%s'.", $imagefile), 1), quit_global($in, 0);
-
-$::direct or $in->ask_okcancel(_("Auto Install Configurator"),
-_("You are about to configure an Auto Install floppy. This feature is somewhat dangerous and must be used circumspectly.
-
-With that feature, you will be able to replay the installation you've performed on this computer, being interactively prompted for some steps, in order to change their values.
-
-For maximum safety, the partitioning and formatting will never be performed automatically, whatever you chose during the install of this computer.
-
-Do you want to continue?"), 1) or quit_global($in, 0);
-
-
-my @manual_steps = qw(doPartitionDisks formatPartitions);
-my @all_steps;
-my @choices;
-
-my $st = \%steps::installSteps;
-
-for (my $f = $st->{first}; $f; $f = $st->{$f}{next}) {
-    next if member($f, @manual_steps);
-    my $def_choice = 'replay';
-    push @choices, { label => _($st->{$f}{text}), val => \$def_choice, list => [ _('replay'), _('manual') ] };
-    push @all_steps, [ $f, \$def_choice ];
-}
-
-$in->ask_from(_("Automatic Steps Configuration"),
-	      _("Please choose for each step whether it will replay like your install, or it will be manual"),
-	      \@choices
-	     ) or quit_global($in, 0);
-
-${$_->[1]} eq _('manual') and push @manual_steps, $_->[0] foreach @all_steps;
-
-my $mountdir = "/root/tmp/drakautoinst-mountdir"; -d $mountdir or mkdir $mountdir, 0755;
-my $floppy = detect_devices::floppy();
-my $dev = devices::make($floppy);
-$in->ask_okcancel('', _("Insert a blank floppy in drive %s", $floppy), 1) or quit_global($in, 0);
-{
-    my $w = $in->wait_message('', _("Creating auto install floppy"));
-    commands::dd("if=$imagefile", "of=$dev", "bs=1440", "count=1024");
-    common::sync();
-}
-fs::mount($dev, $mountdir, 'vfat', 0);
-my $cfgfile = "$mountdir/auto_inst.cfg";
-eval(cat_($cfgfile));
-my $o_old = $o;
-
-if (!$::isEmbedded && $in->isa('interactive_gtk')) {
-    require Gtk;
-    init Gtk;
-    require my_gtk;
-    import my_gtk qw(:helpers :wrappers);
-
-    my %tree;
-    $struct_gui{$_} = 'General' foreach qw(lang isUpgrade autoExitInstall timezone default_packages mkbootdisk);
-    $struct_gui{$_} = 'Security' foreach qw(crypto security);
-    $struct_gui{$_} = 'Harddrive' foreach qw(partitions manualFstab useSupermount partitioning);
-    $struct_gui{$_} = 'Network' foreach qw(intf netc netcnx);
-    $struct_gui{$_} = 'Users' foreach qw(superuser users authentication);
-    $struct_gui{$_} = 'Hardware' foreach qw(keyboard mouse X printer wacom nomouseprobe);
-
-    %pixmap = ( lang => 'language',
-		isUpgrade => '',
-		security => 'security',
-		autoExitInstall => '',
-		timezone => '',
-		default_packages => '',
-		partitions => 'harddrive',
-		manualFstab => 'partition',
-		useSupermount => '',
-		partitioning => 'partition',
-		intf => 'network',
-		netc => 'network',
-		netcnx => 'network',
-		superuser => 'user',
-		users => 'user',
-		authentication => '',
-		keyboard => 'keyboard',
-		mouse => 'mouse',
-		X => 'X',
-		printer => 'printer',
-		wacom => '',
-	      );
-
-    member($_, keys %struct_gui) and push @{$tree{$struct_gui{$_}}}, [$_ , $pixmap{$_}, h2widget($o->{$_}, "\$o->\{$_\}") ] foreach (keys %$o);
-
-    my $W = my_gtk->new(_('$o edition'));
-    my @box_to_hide;
-    my $nb_pages=0;
-    my $notebook = new Gtk::Notebook;
-    $notebook->set_show_border(0);
-    $notebook->set_show_tabs(0);
-    $notebook->append_page(gtkpack_(gtkset_border_width(new Gtk::VBox(0,0), 10),
-				    1, new Gtk::VBox(0,0),
-				    0, gtkpack_(new Gtk::HBox(0,0),
-						1, new Gtk::VBox(0,0),
-						0, gtkadd(gtkset_shadow_type(new Gtk::Frame, 'etched-in'),
-							  new Gtk::Pixmap(gtkcreate_png('mdk_logo'))),
-						1, new Gtk::VBox(0,0),
-					       ),
-				    0, _("\nWelcome.\n\nThe parameters of the auto-install are available in the sections on the left"),
-				    1, new Gtk::VBox(0,0),
-				   ), undef);
-    $notebook->show_all;
-    $notebook->set_page(0);
-
-    gtkadd($W->{window},
-	   gtkpack_(new Gtk::VBox(0,5),
-	   1, gtkpack_(new Gtk::HBox(0,0),
-		    0, gtkadd(gtkset_usize(gtkset_shadow_type(new Gtk::Frame, 'in'), 130, 470),
-			    gtkpack_(new Gtk::VBox(0,0),
-				     map {
-					 my $box = new Gtk::VBox(0,0);
-					 push @box_to_hide, $box;
-					 $box->{vis} = 0;
-					 my @button_to_hide;
-					 0, gtksignal_connect(new Gtk::Button(_("$_")), clicked => sub {
-								if($box->{vis}) { $box->hide(); $box->{vis} = 0; $notebook->set_page(0); }
-								else {
-								    $_->hide, $_->{vis}=0 foreach @box_to_hide;
-								    $box->show; $box->{vis} = 1;
-								    $box->{active_function} and $box->{active_function}->();
-								}
-							    }), 1, gtkpack__($box,
-							  map {
-							      my $button = gtkset_relief(new Gtk::ToggleButton(), 'none');
-							      push @button_to_hide, $button;
-							      my $gru = $_->[0];
-							      $notebook->append_page(gtkshow($_->[2]), undef);
-							      $nb_pages++;
-							      my $local_page = $nb_pages;
-							      my $function = sub { $notebook->set_page($local_page) };
-							      gtksignal_connect($button, toggled => sub {
-										    $button->get_active() and $function->()
-										});
-							      my $b;
-							      if ($_->[1] ne "") { $b = new Gtk::Pixmap(gtkcreate_png($_->[1]))} else { $b = ()};
-							      gtksignal_connect(gtkadd($button,
-										       gtkpack__(new Gtk::VBox(0,3),
-												 $b,
-												 _($_->[0]),
-												)
-										      ), released => sub {
-											  $button->get_active() or $button->set_active(1),return;
-											  $_->set_active(0) foreach @button_to_hide;
-											  $button->set_active(1);
-											  $box->{active_function} = $function;
-											  $function->();
-										      })
-									    } @{$tree{$_}}
-									   )
-							} keys(%tree)
-				    )
-			   ),
-		    1, $notebook,
-		   ),
-	    0, new Gtk::HSeparator,
-	    0, gtkadd(gtkset_border_width(gtkset_layout(new Gtk::HButtonBox, 'end'), 5),
-		      gtksignal_connect(new Gtk::Button(_("Accept")), clicked => sub { Gtk->main_quit;  }),
-		      gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub { $o = $o_old; Gtk->main_quit; quit_global($in, 0) }),
-		     )
-	   )
-	  );
-    $_->hide foreach @box_to_hide;
-#    $W->{window}->show_all;
-#      gtkadd($W->{window},
-#  	   gtkpack_($W->create_box_with_title(_("Edit variables")),
-#  		    1, my $notebook = create_notebook( map { $_, h2widget($o->{$_}, "\$o->\{$_\}") } keys %$o ),
-#  		    0, gtkpack(gtkset_border_width(new Gtk::HBox(0,0),5), $W->create_okcancel),
-#  		   ),
-#  	  );
-#    $notebook->set_tab_pos('left');
-#    $::isEmbedded and Gtk->main_iteration while Gtk->events_pending;
-    $::isEmbedded and kill (12, $::CCPID);
-    $W->main;
-#    $W->destroy();
-}
-
-my $str = join('',
-"#!/usr/bin/perl -cw
-#
-# Special file generated by ``drakautoinst''.
-#
-# You should check the syntax of this file before using it in an auto-install.
-# You can do this with 'perl -cw auto_inst.cfg.pl' or by executing this file
-# (note the '#!/usr/bin/perl -cw' on the first line).
-",
-	       Data::Dumper->Dump([$o], ['$o']), q(
-package install_steps_auto_install;
-$graphical = 1;
-), Data::Dumper->Dump([\@manual_steps], ['$msteps']),
-q(push @graphical_steps, @$msteps;
-), "\0");
-$str =~ s/ {8}/\t/g; #- replace all 8 space char by only one tabulation, this reduces file size so much :-)
-output($cfgfile, $str);
-
-fs::umount($mountdir);
-
-$in->ask_okcancel(_("Congratulations!"), 
-_("The floppy has been successfully generated.
-You may now replay your installation."));
-
-quit_global($in, 0);
-
-
-sub quit_global {
-    my ($in, $exitcode) = @_;
-    $::isEmbedded ? kill USR1, $::CCPID : $in->exit($exitcode);
-    goto begin;
-}
-
-
-
-sub h2widget {
-    my ($k, $label) = @_;
-    my $w;
-    if(ref($k) =~ /HASH/) {
-	my $vb;
-	my @widget_list;
-	my $i = -1;
-	my @list_keys = keys(%{$k});
-	if (ref(${$k}{$list_keys[0]}) =~ /HASH/) {
-	    $i++;
-	    my ($button_add, $button_remove);
-	    $w = gtkpack_(new Gtk::VBox(0,0),
-			  1, createScrolledWindow(gtkpack__($vb = new Gtk::VBox(0,10),
-							    $widget_list[$i] = create_packtable({ col_spacings => 10, row_spacings => 3 },
-					map {
-					    my $e;
-					    $e = h2widget(${$k}{$_}, "$label\{$_\}");
-					    [ "$_ : ", $e ] } @list_keys
-									    ),
-						       )
-					     ),
-			  control_buttons(${$k}{$list_keys[0]},
-					  sub { my ($vb, $widget_list2, $ref_local_k, $i) = @_;
-						my @widget_list = @{$widget_list2};
-			my $field = $in->ask_from_entry(_("Auto Install"), ("Enter the name of the new field you want to add")) or return undef;
-						$field eq '' and return undef;
-						gtkpack__($vb,
-							  $widget_list[$i] = create_packtable({ col_spacings => 10, row_spacings => 3 },
-										      [ "$field : ", h2widget($ref_local_k, "$label\{$field\}")])
-							 );
-						@{$widget_list2} = @widget_list;
-					    },
-					  $vb, \$i, \@widget_list)
-			 );
-	} else {
-	    $w = create_packtable({ col_spacings => 10, row_spacings => 3 },
-				  map { create_entry_element(${$k}{$_}, "$label\{$_\}", $_) } @list_keys
-				 )
-	}
-    } elsif(ref($k) =~ /ARRAY/) {
-	my $vb;
-	my @widget_list;
-	my $i = -1;
-	$w = gtkpack_(new Gtk::VBox(0,0),
-		      1, createScrolledWindow(
-					      gtkpack__($vb = new Gtk::VBox(0,5),
-							map { $i++; $widget_list[$i] = h2widget($_, "$label\[$i\]") } @{$k},
-						       )
-					     ),
-		      control_buttons(@{$k}[0],
-				      sub { my ($vb, $widget_list2, $ref_local_k, $i) = @_;
-					    my @widget_list = @{$widget_list2};
-					    gtkpack__($vb, $widget_list[$i] = h2widget($ref_local_k, "$label\[$i\]"));
-					    @{$widget_list2} = @widget_list;
-					},
-				      $vb, \$i, \@widget_list)
-		     );
-    } else {
-	$label =~ /\$o->\{(.+)\}/;
-	$w = create_packtable({ col_spacings => 10, row_spacings => 3 },
-			      create_entry_element($k, $label, $1))
-    }
-    return $w;
-}
-
-
-sub create_entry_element {
-    my ($text, $value, $label) = @_;
-    my $e = new Gtk::Entry;
-    $e->{value} = $value;
-    my $tag = Gtk->timeout_add(1000, sub { $e->set_text($text); 0 });
-    gtksignal_connect($e, changed => sub {
-			  my $exe = $e->{value} . "='" . $e->get_text() . "'";
-			  print "EXEC : $exe\n ";
-			  eval "$exe";
-		      });
-    [ "$label : ", $e ]
-}
-
-sub control_buttons {
-    my ($ref_local_k, $local_gui, $vb, $j, $widget_list2) = @_;
-    my @widget_list = @{$widget_list2};
-    my $i = ${$j};
-    my (%local_k) = %{$ref_local_k};
-    my ($button_add, $button_remove);
-    0, gtkadd(gtkset_border_width(gtkset_layout(new Gtk::HButtonBox, 'spread'), 5),
-	      gtksignal_connect($button_add = new Gtk::Button(_("Add an item")), clicked => sub {
-				    $local_k{$_} = undef foreach keys %local_k;
-				    $i++;
-				    $local_gui->($vb, \@widget_list, \%local_k, $i) or $i--, return;
-				    $i>=0 and $button_remove->set_sensitive(1);
-				}
-			       ),
-	      gtksignal_connect($button_remove = new Gtk::Button(_("Remove the last item")), clicked => sub {
-				    $i>=0 or return;
-				    $widget_list[$i]->destroy();
-				    $i--;
-				    $i>=0 or $button_remove->set_sensitive(0);
-				}
-			       )
-	     )
-}
-
-#-------------------------------------------------
-#- $Log$
-#- Revision 1.14  2001/11/05 16:07:21  damien
-#- typo
-#-
-#- Revision 1.13  2001/10/30 20:11:31  damien
-#- corrected ref($in) =~ /gtk/
-#-
-#- Revision 1.12  2001/10/30 17:00:05  damien
-#- updated
-#-
-#- Revision 1.11  2001/10/26 13:45:11  damien
-#- progress bar hack
-#-
-#- Revision 1.10  2001/10/25 11:59:58  damien
-#- simple variables handled, code compression.
-#-
-#- Revision 1.9  2001/10/25 11:17:03  damien
-#- The new and shiny drakautoinst is coming. P|-|34R
-#-
-#- Revision 1.8  2001/10/25 02:18:24  damien
-#- The new drakautoinst is coming. P|-|34R
-#-
-#- Revision 1.7  2001/09/18 17:35:50  gc
-#- have "manual" and "replay" translated
-#-
-#- Revision 1.6  2001/09/14 17:30:23  siegel
-#- Check exisence of "/root/replay_install.img" before anything else ...
-#-
-#- Revision 1.5  2001/08/29 21:58:24  gc
-#- quit_global
-#-
-#- Revision 1.4  2001/08/26 14:34:10  gc
-#- require -> use
-#-
-#- Revision 1.3  2001/08/18 17:52:21  prigaux
-#- big renaming of ask_from_entries_refH in ask_from and ask_from_entries_refH_powered in ask_from_
-#-
-#- Revision 1.2  2001/08/13 19:08:27  gc
-#- ouch! use lib from /usr/lib/libDrakX, rather than from ..
-#-
-#- Revision 1.1  2001/08/13 19:06:50  gc
-#- initial revision for drakautoinst
-#- - put %installSteps in a separate package (steps.pm) (for drakxtools)
-#- - use additional fields {auto} and {noauto}, by step, to ease interactive auto install and oem stuff
-#- - in install2.pm, perform each step either from the interactive class or from install_steps, according to the {auto} flag
-#- - id, tell each step to not try to be automatic if {noauto}
-#- - in the install, have auto install bootdisk created in install_any so we can always write a bootdisk (from install_steps) for further use from drakautoinst in standalone
-#- - interactive version of install_steps_auto_install is now inheriting from the interactive class, so we can click on a previous automatic step and have it interactively during an interactive auto install
-#-
-#-
diff --git a/perl-install/standalone/drakbackup b/perl-install/standalone/drakbackup
deleted file mode 100755
index 78d98e932..000000000
--- a/perl-install/standalone/drakbackup
+++ /dev/null
@@ -1,219 +0,0 @@
-#!/usr/bin/perl
-#
-# Copyright (C) 2001 by Sebastien DUPONT <sdupont@mandrakesoft.com>
-# Redistribution of this file is permitted under the terms of the GNU
-# Public License (GPL)
-## description:
-#
-#  Drakbacup is use to backup system files and user files
-#  Drakbacup allow to restore the system (etc, var files)
-#  from starup or on drakconf utility.
-#
-#backup name format: all the time from the /
-#                    backup_sys_12102001.tar.gz                    -> default system backup
-#		     backup_sys_etc_var_proc_12102001.tar.gz       -> specific system directories
-#		     backup_user_james_12102001.tar.gz             -> default user backup
-#		     backup_user_james_documents_12102001.tar.gz   -> specific user directories
-#                    backup_other_proc_12102001.tar.gz             -> specific other directories
-#
-# backup name rules: system: begin by sys
-#                    user:   begin by user
-#                    other:   begin by other
-#                    end of all `date`.tar.gz
-#
-# seems to be good idea to have a txt file where user explain the differences
-# between all the backup
-#
-# save only the differences...
-# find / -mtime -1 \! -type d -print > /tmp/liste.jour
-#
-# build iso fs with rescue.
-#
-# configuration file on /etc/drakconf/drakbackup/drakbakup.conf
-#
-
-use Gtk;
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-use standalone;
-use my_gtk qw(:helpers :wrappers);
-use common;
-use strict;
-
-
-if ("@ARGV" =~ /--help|-h/) {
-    print q(Backup and monitoring application
-
---list           : list of files or directories to backup.
---default        : save default directories.
---build_cd       : build restore iso with the currents backups files
-                       & rescue options.
---build_floppy   : build restore floppy.
---update         : don t replace the old backup, only update it. 
---replace        : delete backup files before build new.
---save_dir       : by default the backup files are saved in 
-                       in /var/backup directory so write other directory
-	               to change to change it.
---conf_file      : to read other configuration file. 
-);
-    exit(0);
-}
-
-# Backend Options.
-my $default = 0;
-my $build_cd = 0;
-my $build_floppy = 0;
-my $comp_mode = 0;
-my $mode = 0;
-my $replace = 0;
-my $update = 0;
-my $conf_file = 0;
-my @list_arg = ();
-my @sys_files ;
-my @home_files;
-my @other_files;
-my $save_path;
-my $option_replace = 0;
-my $option_update = 0;
-my $windows = 0;
-my $central_widget;
-my $interactive;
-
-
-# PATH  & Global variables.
-my $cfg_file = "/etc/drakconf/drakbackup/drakbackup.conf";
-
-
-
-foreach (@ARGV) {
-    /--default/ and $default = 1, $mode=-1;
-    /--build_cd/ and $build_cd = 1, $mode=-1;
-    /--build_floppy/ and $build_floppy = 1, $mode=-1;
-    /--replace|-r/ and $replace = 1, $mode=-1;
-    /--update|-u/ and $update = 1, $mode=-1;
-    /--conf_file/ and $mode = 0, next;
-#    $mode == 0 and push $conf_file, $_;
-    /--list/ and $mode = 1, next;
-    $mode == 1 and push @list_arg, $_;
-}
-
-sub debug {
-    print "SYS_FILES: $_ \n" foreach (@sys_files);
-    print "HOME_FILES: $_ \n" foreach (@home_files);
-    print "OTHER_FILES: $_ \n" foreach (@other_files);
-    print "PATH_TO_SAVE: $save_path \n";
-    print "OPTION_REPLACE: $option_replace \n";
-    print "OPTION_UPDATE: $option_update \n";
-    print "OPTION_COMP: $comp_mode \n";
-}
-
-sub read_conf_file {
-    foreach (cat_("$cfg_file")) {
-	if (/^SYS_FILES/) {  
-	    chomp;
-	    s/^SYS_FILES=//gi;
-	    @sys_files = split(' ', $_ );
-	}
-	if (/^HOME_FILES/)  {
-	    chomp;
-	    s/^HOME_FILES=//gi;
-	    @home_files = split(' ', $_ );
-	}
-	if (/^OTHER_FILES/)  {
-	    chomp;
-	    s/^OTHER_FILES=//gi;
-	    @other_files = split(' ', $_ );
-	}
-	if (/^PATH_TO_SAVE/) {
-	    chomp;
-	    $save_path = $_;
-	}
-	if (/^OPTION_REPLACE/){
-	    $option_replace = 1;
-	    $option_update  = 0;
-	}
-        if (/^OPTION_UPDATE/){
-	    $option_replace = 0;
-	    $option_update  = 1;
-	}
-	if (/^OPTION_COMP/) {
-	    chomp;
-	    s/^OPTION_COMP=//gi;
-	    /TAR.GZ/ and  $comp_mode = 0;
-	    /TAR.BZ2/ and $comp_mode = 1;
-	}
-    }
-    debug; 
-}
-
-$build_floppy || $build_cd || $default || @list_arg || $conf_file ? backend_mod() : interactive_mode();
-
-sub backend_mod {
-    read_conf_file();
-}
-
-sub build_cd_fct {
-
-}
-
-sub build_floppy_fct {
-
-}
-
-sub build_backup_files {
-
-}
-
-sub interactive_mode {
-    my $font_box;
-    my $font_sel;
-    $interactive = 1;
-    
-    init Gtk;
-    
-    my $window1 = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window -toplevel;
-    $window1->signal_connect (delete_event => sub { Gtk->exit(0) });
-    $window1->set_position(1);
-    $window1->set_title(_("Fonts Importation"));
-    $window1->set_border_width(5);
-    
-    gtkadd($window1,
-	   gtkpack_(new Gtk::HBox(0,2),
-		    1, gtkpack_(new Gtk::VBox(0,2),
-				1, new Gtk::VBox(0,0),
-				1, gtkpack(gtkset_usize($font_box = new Gtk::VBox(0,5),500, 350),
-					   $font_sel = new Gtk::FontSelection,
-					   ),
-				1, new Gtk::VBox(0,0)
-				),
-		    0, gtkpack_(new Gtk::VBox(0,5),
-				0, _("DrakFont"),
-				0, gtkadd(gtkset_layout(new Gtk::VButtonBox, -end),
-					  gtksignal_connect(new Gtk::Button(_("Windows Importation")), clicked 	=>
-							    sub { ${$central_widget}->destroy(); $windows = 1; license(\&appli_choice)}),
-					  gtksignal_connect(new Gtk::Button(_("Advanced Importation")), clicked =>
-							    sub {  ${$central_widget}->destroy(); $windows = 0; license(\&advanced_install)}),
-					  gtksignal_connect(new Gtk::Button(_("Uninstall Fonts")), clicked => 
-							    sub { ${$central_widget}->destroy(); uninstall() }),
-					  gtksignal_connect(new Gtk::Button(_("Font List")), clicked 	=>
-							    sub { ${$central_widget}->destroy(); create_fontsel()}),
-					  ),
-				1, new Gtk::VBox(0,0),
-				1, gtkadd(gtkset_layout(new Gtk::VButtonBox, -end),
-					  gtksignal_connect(new Gtk::Button(_("             Help           ")), clicked => sub { 
-					       ${$central_widget}->destroy(); help() }),
-					  gtksignal_connect(new Gtk::Button(_("Close")), clicked => sub { Gtk->main_quit() }),
-					  ),
-				)
-		    ),
-	   );
-    $central_widget = \$font_sel;
-    $window1->show_all;
-    $window1->realize;
-    $window1->show_all();
-    
-    Gtk->main;
-    Gtk->exit(0);
-}
-
-
diff --git a/perl-install/standalone/drakboot b/perl-install/standalone/drakboot
deleted file mode 100755
index 8a17b4813..000000000
--- a/perl-install/standalone/drakboot
+++ /dev/null
@@ -1,56 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-
-
-use common;
-use interactive;
-use standalone;
-use any;
-use bootloader;
-use detect_devices;
-use fsedit;
-use fs;
-use c;
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: drakboot [--expert]\n";
-
-$::expert = /-expert/;
-
-my $in = 'interactive'->vnew('su', 'bootloader');
-
-require 'bootlook.pm' if $in->isa('interactive_gtk');
-lilo_choice();
-
-
-sub lilo_choice
-{
-    my $bootloader = bootloader::read('', '/etc/lilo.conf');
-    local ($_) = `detectloader`;
-    $bootloader->{methods} = { lilo => 1, grub => !!/grub/i };
-    
-    my ($all_hds) = catch_cdie { fsedit::hds([ detect_devices::hds() ], {}) } sub { 1 };
-    my $fstab = [ fsedit::get_all_fstab(@$all_hds) ];
-    fs::merge_info_from_fstab($fstab);
-    
-    $::expert=1;
-    
-  ask:
-    any::setupBootloader($in, $bootloader, $all_hds, $fstab, $ENV{SECURE_LEVEL}) or $in->exit(0);
-    eval { bootloader::install('', $bootloader, $fstab, $all_hds->{hds}) };
-
-    if ($@) {
-	$in->ask_warn('', 
-		      [ _("Installation of LILO failed. The following error occured:"),
-			grep { !/^Warning:/ } cat_("/tmp/.error") ]);
-	unlink "/tmp/.error";
-	goto ask;
-    }
-}
-    !$::isEmbedded and $in->exit(0);
-    kill(USR1, $::CCPID);
-    goto ask;
-
diff --git a/perl-install/standalone/drakbug_report b/perl-install/standalone/drakbug_report
deleted file mode 100755
index e031a008f..000000000
--- a/perl-install/standalone/drakbug_report
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-
-use MDK::Common;
-use any;
-
-my %other = (
-    'rpm -qa' => join('', sort `rpm -qa`),
-    'mandrake version' => cat_('/etc/redhat-release'),
-);
-
-print any::report_bug('', %other);
diff --git a/perl-install/standalone/drakfont b/perl-install/standalone/drakfont
deleted file mode 100755
index 03de1cc96..000000000
--- a/perl-install/standalone/drakfont
+++ /dev/null
@@ -1,904 +0,0 @@
-#!/usr/bin/perl 
-#
-# Copyright (C) 2001 by MandrakeSoft (sdupont@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# drakfont Future Overview
-#         - Fonts import :
-#                 pfb ( Adobe Type 1 binary )
-#                 pfa ( Adobe Type 1 ASCII )
-#                 ttf ( True-Type  )
-#                 pcf.gz
-#                 Speedo
-#                 and Bitmap (PCF, BDF, and SNF)
-#         - Features
-#                 - Install fonts from any directory
-#                 - Get windows fonts on any vfat partitions
-#                 - Get fonts on any partitions.
-#                 - UN-installation of any fonts (even if not installed through drakfont)
-#         - Support
-#               - Xfs
-#               - ghostscript & printer
-#               - Staroffice & printer
-#               - abiword
-#		- netscape
-#               - Koffice, Gnumeric, ... studying
-#               - all fonts supported by printer
-#               - anti-aliases by RENDER in Xfree86 .... 
-# 				supported by KDE.
-# 				will be supported by gnome 1.2.
-# Visual Interface:
-#         Window interface:
-#           - Fontselectiondialog widget
-#           - Command buttons under Fontselectiondialog (like the actual frontend).
-#         Commands buttons:
-#           - import from windows partition.
-#                 import from all fat32 partitions and look for winnt/windows/font
-#                 and import all (delete doublon) but don't import if already exist.
-#           - import from directory
-#                 look for if it exist before for each font and not delete the original.
-#                 (replace all, no, none)
-#                 expert options:
-#                         ask the directory, and look for if it exist before
-#                         if it exist ask: (replace all, no, none)
-#           - uninstall with list per font type
-#         Expert additional switch
-#           - option support:   ghostscript, Staroffice, etc...
-#                 check-button. (by default all check)
-#           - Printer Application Fonts Support...
-#                 check-button. (by default all check)
-#
-# TODO:
-#     - abiword, Koffice, Gnumeric, ...  
-#     - Speedo  and Bitmap (PCF, BDF, and SNF)
-#                
-# REQUIRE:
-#     - font-tools.*.mdk.i586.rpm
-#
-# USING:
-#    -  pfm2afm:   by Ken Borgendale: Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)
-#    -  type1inst: by James Macnicol: type1inst generates files fonts.dir fonts.scale & Fontmap.
-#    -  ttf2pt1:   by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  convert ttf font files to afm and pfb fonts
-#
-#
-# directory to install fonts /usr/X11R6/lib/X11/fonts/
-# -->> /usr/X11R6/lib/X11/fonts/drakfont
-
-use Gtk;
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-use standalone;
-use my_gtk qw(:helpers :wrappers);
-use common;
-use strict;
-
-if ("@ARGV" =~ /--help|-h/) {
-    print q(Font Importation and monitoring application
---windows_import : import from all available windows partitions.
---xls_fonts      : show all fonts that already exist from xls
---strong         : strong verification of font.
---install        : accept any font file and any directry.
---uninstall      : uninstall any font or any directory of font.
---replace        : replace all font if already exist
---application    : 0 none application.
-                 : 1 all application available supported.
-                 : name_of_application like  so for staroffice 
-                 : and gs for ghostscript for only this one.
-);
-    exit(0);
-}
-
-#   global variables needed by each functions
-my $xlsfonts = 0;
-my $windows = 0;
-my $strong;
-my $replace;
-my $application;
-my $install;
-my $uninstall;
-my $so = 1;
-my $gs = 1;
-my $abi = 1;
-my $printer = 1;
-my $mode = -1;
-my @application;
-my @install;
-my @uninstall;
-my $interactive;
-my $text;
-my $vscrollbar;
-my $check4;
-my $check1;
-my $check2;
-my $check3;
-my $pbar;
-my $pbar1;
-my $pbar2;
-my $pbar3;
-my $font_box;
-my $central_widget;
-my $label1;
-my $label2;
-my $label3;
-my $label4;
-my $list_path;
-my $path_list;
-my $current_path;
-my $list;
-my $list_all_font_path;
-
-foreach (@ARGV) {
-    /--list|-l/ and $list_all_font_path = 1, $mode=-1;
-    /--xls_fonts/ and $xlsfonts = 1, $mode=-1;
-    /--windows_import|-wi/ and $windows = 1, $mode=-1;
-    /--strong|-s/ and $strong = 1, $mode=-1;
-    /--replace|-r/ and $replace = 1, $mode=-1;
-    /--application/ and $mode = 0, next;
-    $mode == 0 and push @application, $_;
-    /--install/ and $mode = 1, next;
-    $mode == 1 and push @install, $_;
-    /--uninstall/ and $mode = 2, next;
-    $mode == 2 and push @uninstall, $_;
-}
-
-
-
-foreach my $i (@application) {
-    if ( $i =~ /so/i) {
-	if ( $gs != 2 ) { $gs = 0;}
-	$so = 2;
-    }
-    if ($i  =~ /gs/i){ 
-	if ( $so != 2 ) { $so = 0; }
-	$gs = 2;
-    }
-}
-
-# PATH and binary full path
-my $xfs_conffile = '/etc/X11/fs/config';
-my $drakfont_dir = '/usr/X11R6/lib/X11/fonts/drakfont';
-my $ttf2pt1 = '/usr/sbin/ttf2pt1';
-my $pfm2afm = '/usr/sbin/pfm2afm';
-my $type1inst = '/usr/sbin/type1inst';
-my $chkfontpath = '/usr/sbin/chkfontpath';
-my $ttmkfdir = '/usr/sbin/ttmkfdir';
-my $ghostscript;
-
-# Global lists, just to manipulate it easily.
-# my @font_list                    => list of fonts to install.
-# my @installed_fonts;             => list of installed fonts.
-# my @installed_fonts_path;        => list of path included in xfs.
-# my @fontsdir_to_install;         => list of fonts to uninstall.
-# my @fontsdir_to_uninstall;       => path to remove in xfs font file.
-# my @installed_fonts_full_path;   => full path list of fonts to uninstall.
-
-my @font_list;
-my @installed_fonts;
-my @installed_fonts_path;
-my @fontsdir_to_install;
-my @fontsdir_to_uninstall;
-my @installed_fonts_full_path;
-
-
-sub list_fontpath {
-    foreach (grep { /\d+:\s/ } `$chkfontpath -l`) {
-	chomp;
-	s/\d+:\s//gi;
-	s/:\w*$//gi;
-	push @installed_fonts_path, $_;
-    }
-}
-
-
-sub chk_empty_xfs_path {
-    my @temp3;
-    foreach  my $tmp_path (@installed_fonts_path) {
-	@temp3 = ();
-	foreach my $temp2 (all($tmp_path)) {
-	    if (!(($temp2 =~ /^fonts/ ) || ($temp2 =~ /^type/ ))) {
-		push @temp3, $temp2;
-	    }
-	}
-	if(!(@temp3)) {
-	    system("chkfontpath -r $tmp_path ") or 
-		print "PERL::system command failed during chkfontpath\n";
-	}
-    }
-}
-
-
-
-
-
-sub search_installed_fonts {
-    list_fontpath();
-    $interactive and progress($pbar, 0.01, _("Search installed fonts"));
-    push @installed_fonts, all($_) foreach @installed_fonts_path;
-    $interactive and progress($pbar, 1/4, _("Unselect fonts installed"));
-}
-
-sub search_installed_fonts_full_path {
-    list_fontpath();
-    foreach my $i (@installed_fonts_path) {
-	foreach my $j (all($i)) {
-	    push @installed_fonts_full_path, "$i/$j";
-	}
-    }
-}
-
-sub search_windows_font {
-    foreach my $fstab_line (grep { /vfat/ } cat_('/etc/mtab') ) {
-	my $win_dir = (split('\s', $fstab_line))[1];
-	my @list_fonts_win = all("$win_dir/windows/fonts");
-	my @list_fonts_winnt = all("$win_dir/winnt/fonts");
-	my $nb_dir = @list_fonts_win + @list_fonts_winnt;
-	foreach $_ ([\@list_fonts_win, "windows"], [\@list_fonts_winnt, "winnt"]) {
-	    foreach my $i (@{$_->[0]}) {
-		if($interactive) {
-		    if($nb_dir) { progress($pbar, 0.25/$nb_dir, _("parse all fonts")) } else {
-			display_error(_("no fonts found"));
-			return 0;
-		    }
-		}
-		!$replace && grep(/$i/, @installed_fonts) and next;
-		grep ( /$i$/, @font_list) or push @font_list, "$win_dir/$_->[1]/fonts/$i";
-	    }
-	}
-	$interactive && $nb_dir and  progress($pbar, 1/4, _("done"));
-    }
-    if(!@font_list) {
-	print "drakfont:: could not find any font in /win*/fonts \n";
-	$interactive and display_error(_("could not find any font in /win*/fonts"));
-	return 0;
-    }
-    1;
-}
-
-sub is_a_font {
-    local $_ = $_[0];
-    /.ttf$/i || /.pfa$/i || /.pfb$/i || /.pcf$/i || /.pcf.gz$/i || /.pfm$/i || /.gsf$/;
-}
-
-# Optimisation de cette etape indispensable
-
-sub search_dir_font {
-    foreach my $fn (@install) {
-	my @font_list_tmp = ();
-	my @font_list_tmpp = ();
-	my $dir ;
-	if (!(-e $fn )) { print "$_ :: no such file or directory \n" } else {
-	    if ( -d $fn ) {
-		$dir = $fn;
-		foreach my $i (all($fn)) {
-		    if (is_a_font($i)) {
-			push @font_list_tmp, "$i";
-			foreach my $i (@font_list_tmp) {
-			    !$replace && grep(/$i/, @installed_fonts) and next;
-			    grep /$i/, @font_list or push @font_list, "$fn/$i";
-			}
-		    }
-		}
-	    } else {
-		if (is_a_font($fn)) {
-		    !$replace && grep(/$fn/, @installed_fonts) and next;
-		    !grep /$fn/, (@installed_fonts) and push @font_list, "$fn";
-		}
-	    }
-	}
-	$interactive and progress($pbar, 0.50/@install, _("Reselect correct fonts"));
-    }
-    $interactive and progress($pbar, 1/3, _("done"));
-    !@font_list && $interactive and display_error(_("could not find any font.\n"));
-}
-
-sub search_dir_font_uninstall {
-    my @font_list_tmp = ();
-    my $fn = $_;
-    if ( -d $fn ) { 
-	foreach my $i (all($fn)) {
-	    if (is_a_font($i)) { push @font_list_tmp, "$i"; }
-	}
-    }
-    else { if (is_a_font($fn)) { push @font_list_tmp, "$fn"; }
-       }
-    foreach my $i (@installed_fonts_full_path) {
-	foreach my $j (@font_list_tmp) {
-	    if ( $i =~ /$j/) { push @font_list, "$i" ;}
-	}
-    }
-    print "Fonts to uninstal : " . $_ . "\n" foreach (@font_list);
-}
-
-sub search_dir_font_uninstall_gi {
-    @font_list = @uninstall;
-    $interactive and progress($pbar, 1, _("Search fonts in installed list"));
-}
-
-
-sub print_list { print "Font(s) to Install :\n\n"; print "$_\n" foreach (@font_list) }
-
-sub dir_created {
-    -e $drakfont_dir		    || mkdir_p($drakfont_dir);
-    -e $drakfont_dir . "/Type1"	    || mkdir_p($drakfont_dir."/Type1"); 
-    -e $drakfont_dir . "/ttf"	    || mkdir_p($drakfont_dir."/ttf");
-    -e $drakfont_dir . "/tmp"	    || mkdir_p($drakfont_dir."/tmp");
-    -e $drakfont_dir . "/tmp/ttf"   || mkdir_p($drakfont_dir."/tmp/ttf");
-    -e $drakfont_dir . "/tmp/Type1" || mkdir_p($drakfont_dir."/tmp/Type1");
-    -e $drakfont_dir . "/tmp/tmp"   || mkdir_p($drakfont_dir."/tmp/tmp");
-}
-
-sub put_font_dir {
-    my @tmpl;
-    my @list_ttf;
-    -e "/usr/share/ghostscript" or $gs = 0 && print "ghostscript is not installed on your system...\n"  ;
-    if (@font_list) {
-	dir_created();
-	foreach my $i (@font_list) {
-	    cp_af($i, $drakfont_dir . "/tmp/tmp");
-	    $interactive and progress($pbar1, 1/@font_list, _("Fonts copy"));
-	}
-	$interactive and progress($pbar1, 0.01, _("done"));
-	$interactive and progress($pbar2, 0.10, _("True Type fonts installation"));
-  
-	system ("cd $drakfont_dir/tmp/tmp   && cp *.ttf ../../ttf");
-	$interactive and progress($pbar2, 0.20, _("please wait during ttmkfdir..."));
-	system ("cd $drakfont_dir/ttf && $ttmkfdir > fonts.dir" );
-	$interactive and progress($pbar2, 0.10, _("True Type install done"));
-	my $restart_xfs = "$chkfontpath -a $drakfont_dir/ttf";
-	
-	if ($so && $gs)  {
-	    my @glob_drak = glob ("$drakfont_dir/tmp/tmp/*.ttf");
-	    foreach my $fontname (@glob_drak) { 
-		system ("cd $drakfont_dir/tmp/tmp && $ttf2pt1 -b $fontname");
-		$interactive and progress($pbar2, 0.50/@glob_drak, _("Fonts conversion"));
-	    }
-	    system ("cd $drakfont_dir/tmp/tmp && mv *.gsf *.pfb *.pfm *.afm ../Type1");
-	    system ("cd $drakfont_dir/tmp/Type1 && $type1inst" );
-	    $interactive and progress($pbar2, 0.10, _("type1inst building"));
-	    -e "$drakfont_dir/tmp/Type1/Fontmap" and
-	    system ("cd $drakfont_dir/tmp/Type1 && cat Fontmap >> `rpm -ql ghostscript | grep Fontmap.GS` " );
-	    system ("cd $drakfont_dir/tmp/Type1 && mv *.pfm *.gsf *.afm *.pfb ../../Type1 ");
-	    system ("cd $drakfont_dir/Type1 && $type1inst");
-	    $interactive and progress($pbar2, 0.05, _("Ghostscript referencing"));
-	    $restart_xfs .= "; $chkfontpath -a $drakfont_dir/Type1";
-	}
-	
-	if (!$so && $gs)  {
-	    foreach my $fontname ( @tmpl = glob ("$/drakfont_dir/tmp/tmp/*.ttf") ) { 
-		system ("cd $/drakfont_dir/tmp/tmp && $ttf2pt1 -b $fontname");
-		$interactive and progress($pbar2, 0.50/@tmpl, _("Fonts conversion"));
-	    }
-	    system ("cd $drakfont_dir/tmp/tmp && mv *.gsf *.pfb *.pfm ../Type1");
-	    system ("cd $drakfont_dir/tmp/Type1 && $type1inst" );
-	    $interactive and progress($pbar2, 0.1, _("type1inst building"));
-	    system ("cd $drakfont_dir/tmp/Type1 && cat Fontmap >> `rpm -ql ghostscript | grep Fontmap.GS` " );
-	    system ("cd $drakfont_dir/tmp/Type1 && mv *.pfm *.afm *.gsf *.pfb ../../Type1 ");
-	    system ("cd $drakfont_dir/Type1 && $type1inst");
-	    $interactive and progress($pbar2, 0.05, _("Ghostscript referencing"));
-	    $restart_xfs .= "; $chkfontpath -a $drakfont_dir/Type1";
-	}
-	
-	if ($so && !$gs)  {
-	    foreach my $fontname ( @tmpl = glob ("$drakfont_dir/tmp/tmp/*.ttf") ) { 
-		system ("cd $drakfont_dir/tmp/tmp && $ttf2pt1 $fontname");
-		$interactive and progress($pbar2, 0.25/@tmpl, _("ttf fonts conversion"));
-	    }
-	    foreach my $fontname ( @tmpl = glob ("$drakfont_dir/tmp/tmp/*.pfm") ) { 
-		system ("cd $drakfont_dir/tmp/tmp && $pfm2afm $fontname");
-		$interactive and progress($pbar2, 0.25/@tmpl, _("pfm fonts conversion"));
-	    }
-	    system ("cd $drakfont_dir/tmp/tmp && mv  *.afm ../Type1");
-	    system ("cd $drakfont_dir/tmp/Type1 && mv *.afm ../../Type1 ");
-	    system ("cd $drakfont_dir/Type1 && $type1inst");
-	    $interactive and progress($pbar2, 0.14, _("type1inst building"));
-	    $restart_xfs .= "; $chkfontpath -a $drakfont_dir/Type1";
-	}
-	
-	$interactive and  progress($pbar2, 0.01, _("done"));
-	$interactive and  progress($pbar3, 0.25, _("Suppress temporary Files"));
-	rm_rf("$drakfont_dir/tmp/");
-	print "\n\nretarting xfs......\n";
-	$interactive and  progress($pbar3, 0.5 , _("Restart XFS"));
-	system ($restart_xfs);
-	$interactive and  progress($pbar3, 0.30, _("done"));
-    }
-}
-
-sub remove_gs_fonts {
-    my @Fontmap_new;
-    
-    if (all("$drakfont_dir/remove"))  {
-	system (" cd $drakfont_dir/remove && $type1inst");
-	my @Fontmap_out = cat_("$drakfont_dir/remove/Fontmap");
-	my $FontmapGS = `rpm -ql ghostscript | grep Fontmap.GS`;
-	chomp ($FontmapGS);
-	my @FontmapGS_list = cat_($FontmapGS);
-	foreach my $font_gs (@FontmapGS_list) {
-	    my @tmp_list = split (' ',$font_gs);
-	    grep ( $_ =~ /$tmp_list[0]/ , @Fontmap_out) or  push @Fontmap_new, $font_gs;
-	}
-	print $_ foreach @Fontmap_new;
-	output($FontmapGS, @Fontmap_new );
-    }
-}
-
-sub remove_fonts {
-    my @list_dir;
-    -e $drakfont_dir . "/remove"  || mkdir_p($drakfont_dir . "/remove");
-    $interactive and  progress($pbar, 1, _("done"));
-    foreach my $i (@font_list) {
-	$_ = $i;
-	if ( /.pfb$/ || /.gsf$/ || /.pfm$/ || /.pfa$/ ) {
-	    system ("mv $_ $drakfont_dir/remove ");
-	} else {
-	    rm_rf($i);
-	}
-	$i =~ s/\/\w*\.\w*//gi;
-	grep ( $i, (@list_dir)) or push @list_dir, $i;
-	$interactive and  progress($pbar1, 1/@font_list, _("Suppress Fonts Files"));
-    }
-    $interactive and  progress($pbar1, 0.01, _("done"));
-    -e "/usr/share/ghostscript" and  remove_gs_fonts();
-    foreach my $i (@list_dir) {
-	if (listlength all("$i") < 3)  {
-	    system("chkfontpath -r $i") or print "PERL::system command failed during chkfontpath\n";
-	} else {
-	    system("cd $i && type1inst") or print "PERL::system command failed during cd or type1inst\n";
-	}
-	$interactive and  progress($pbar2, 1/@list_dir, _("Suppress Fonts Files"));
-    }
-    $interactive and  progress($pbar2, 0.01, _("xfs restart"));
-    system ("/etc/rc.d/init.d/xfs restart");
-    -e "/usr/share/ghostscript" and  rm_rf("$drakfont_dir/remove");
-    $interactive and  progress($pbar2, 0.01, _("done"));
-}
-
-sub license_msg {
-    print _("Before installing any fonts, be sure that you have the right to use and install them on your system.\n\n-You can install the fonts using the normal way. In rare cases, bogus fonts may hang up your X Server.")."\n";
-}
-
-$list_all_font_path || $xlsfonts || $windows || @install || @uninstall ? backend_mod() : interactive_mode();
-
-sub backend_mod {
-    if ($xlsfonts) {
-	system ("xlsfonts");
-    }
-    if ($list_all_font_path) {
-	system ("$chkfontpath");
-    }
-    if ($windows) {
-	license_msg();
-	print "\nWindows fonts Installation........\n";
-	search_installed_fonts();
-	if(search_windows_font()) {
-	    print_list();
-	    put_font_dir();
-	}
-	print "\nThe End...........................\n";
-    }
-
-    if (@install) {
-	license_msg();
-	print "\nInstall Specifics Fonts...........\n";
-	search_installed_fonts();
-	search_dir_font;
-	print "Font to install : " . $_ . "\n" foreach (@font_list);
-	put_font_dir();
-	print "\nThe End...........................\n";
-    }
-
-    if (@uninstall) {
-	print "\nUninstall Specifics Fonts.........\n";
-	search_installed_fonts_full_path();
-	if ($interactive) { search_dir_font_uninstall_gi() }
-	else { search_dir_font_uninstall $_ foreach (@uninstall) }
-	remove_fonts();
-	print "\nThe End............................\n";
-    }
-}
-
-
-
-sub create_fontsel {
-    my $font_sel;
-    gtkpack($font_box,
-	    $font_sel = new Gtk::FontSelection,
-	    );
-    $central_widget = \$font_sel;
-}
-
-sub display_error {
-    my ($message) = @_;
-    my $label;
-    my $error_box;
-    ${$central_widget}->destroy();
-    gtkpack($font_box,
-	    $error_box = gtkpack_(new Gtk::VBox(0,0),
-		  1, new Gtk::Label($message),
-				  0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread),
-					    gtksignal_connect(new Gtk::Button(_("OK")), clicked => 
-							      sub { ${$central_widget}->destroy(); create_fontsel() }),
-					    ),
-				  )
-	    );
-    $central_widget = \$error_box;
-}
-
-sub interactive_mode {
-    my $font_sel;
-    $interactive = 1;
-    
-    init Gtk;
-    
-    my $window1 = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window -toplevel;
-    $window1->signal_connect (delete_event => sub { Gtk->exit(0) });
-    $window1->set_position(1);
-    $window1->set_title(_("Fonts Importation"));
-    $window1->set_border_width(5);
-    
-    gtkadd($window1,
-	   gtkpack_(new Gtk::HBox(0,2),
-		    1, gtkpack_(new Gtk::VBox(0,2),
-				1, new Gtk::VBox(0,0),
-				1, gtkpack(gtkset_usize($font_box = new Gtk::VBox(0,5),500, 350),
-					   $font_sel = new Gtk::FontSelection,
-					   ),
-				1, new Gtk::VBox(0,0)
-				),
-		    0, gtkpack_(new Gtk::VBox(0,5),
-				0, _("DrakFont"),
-				0, gtkadd(gtkset_layout(new Gtk::VButtonBox, -end),
-					  gtksignal_connect(new Gtk::Button(_("Windows Importation")), clicked 	=>
-							    sub { ${$central_widget}->destroy(); $windows = 1; license(\&appli_choice)}),
-					  gtksignal_connect(new Gtk::Button(_("Advanced Importation")), clicked =>
-							    sub {  ${$central_widget}->destroy(); $windows = 0; license(\&advanced_install)}),
-					  gtksignal_connect(new Gtk::Button(_("Uninstall Fonts")), clicked => 
-							    sub { ${$central_widget}->destroy(); uninstall() }),
-					  gtksignal_connect(new Gtk::Button(_("Font List")), clicked 	=>
-							    sub { ${$central_widget}->destroy(); create_fontsel()}),
-					  ),
-				1, new Gtk::VBox(0,0),
-				1, gtkadd(gtkset_layout(new Gtk::VButtonBox, -end),
-					  gtksignal_connect(new Gtk::Button(_("             Help           ")), clicked => sub { 
-					       ${$central_widget}->destroy(); help() }),
-					  gtksignal_connect(new Gtk::Button(_("Close")), clicked => sub { Gtk->main_quit() }),
-					  ),
-				)
-		    ),
-	   );
-    $central_widget = \$font_sel;
-    $window1->show_all;
-    $window1->realize;
-    $window1->show_all();
-    
-    Gtk->main;
-    Gtk->exit(0);
-}
-
-
-sub license {
-    my ($function) = @_,
-    my $text = new Gtk::Text(undef, undef);
-    my $license_box;
-    gtkpack($font_box,
-	    $license_box = gtkpack_(new Gtk::VBox(0,10),
-				    1, gtkpack_(new Gtk::HBox(0,0),
-						1, gtktext_insert(gtkset_editable($text, 1), "Before installing any fonts, be sure that you have the right to use and install them on your system.\n\n-You can install the fonts using the normal way. In rare cases, bogus fonts may hang up your X Server."),
-						0, new Gtk::VScrollbar($text->vadj),
-						),
-				    0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread),
-					      gtksignal_connect(new Gtk::Button(_("OK")), clicked => sub { 
-						  ${$central_widget}->destroy(); $function->(); }),
-					      gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub {
-						  ${$central_widget}->destroy(); create_fontsel() }),
-					      ),
-				    )
-	    );   
-    $central_widget = \$license_box;
-    $font_box->show_all();
-}
-
-sub help {
-    my $text = new Gtk::Text(undef, undef);
-    my $help_box;
-    gtkpack($font_box,
-	    $help_box = gtkpack_(new Gtk::VBox(0,10),
-	       1, gtkpack_(new Gtk::HBox(0,0),
-			   1, gtktext_insert(gtkset_editable($text, 1), "drakfont Future Overview
-        - Fonts import :
-                pfb ( Adobe Type 1 binary )
-                pfa ( Adobe Type 1 ASCII )
-                ttf ( True-Type  )
-                pcf.gz
-                Speedo
-                and Bitmap (PCF, BDF, and SNF)
-        - Features
-                - Install fonts from any directory
-                - Get windows fonts on any vfat partitions
-                - Get fonts on any partitions.
-                - UN-installation of any fonts (even if not installed through drakfont)
-        - Support
-              - Xfs
-              - ghostscript & printer
-              - Staroffice & printer
-              - abiword
-	      - netscape
-              - Koffice, Gnumeric, ... studying
-              - all fonts supported by printer
-              - anti-aliases by RENDER in Xfree86 .... 
-				supported by KDE.
-				will be supported by gnome 1.2.
-Visual Interface:
-        Window interface:
-          - Fontselectiondialog widget
-          - Command buttons under Fontselectiondialog (like the actual frontend).
-        Commands buttons:
-          - import from windows partition.
-                import from all fat32 partitions and look for winnt/windows/font
-                and import all (delete doublon) but don't import if already exist.
-          - import from directory
-                look for if it exist before for each font and not delete the original.
-                (replace all, no, none)
-                expert options:
-                        ask the directory, and look for if it exist before
-                        if it exist ask: (replace all, no, none)
-          - uninstall with list per font type
-        Expert additional switch
-          - option support:   ghostscript, Staroffice, etc...
-                check-button. (by default all check)
-          - Printer Application Fonts Support...
-
-________________________ ABOUT ____________________________ 
-
-
- USING:
-    -  pfm2afm:   
-	 by Ken Borgendale:
-	    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)
-    -  type1inst:
-	 by James Macnicol: 
-	    type1inst generates files fonts.dir fonts.scale & Fontmap.
-    -  ttf2pt1:   
-	  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  
-             Convert ttf font files to afm and pfb fonts
-
-
-"),
-			   0, new Gtk::VScrollbar($text->vadj),
-			   ),
-				 0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread),
-					   gtksignal_connect(new Gtk::Button(_("OK")), clicked => 
-							     sub { ${$central_widget}->destroy(); create_fontsel() }),
-					   ),
-				 )
-	    );
-    $central_widget = \$help_box;
-    $font_box->show_all();
-}
-
-
-sub appli_choice {
-    my $choice_box;
-    gtkpack($font_box,
-	    $choice_box = gtkpack_(new Gtk::VBox(0,10),
-				   1, my $table2 = create_packtable({ col_spacings => 2, row_spacings => 15},
-	    [_("Choose the applications that will support the fonts :"), ],
-	    [ "" , "" ],		    
-	    [_("Ghostscript"), gtksignal_connect(my $check11 = new Gtk::CheckButton(), clicked =>  sub { print "appli = " ; })],
-	    [_("StarOffice"),  my $check22 = new Gtk::CheckButton()],
-	    [_("Abiword"),  my $check33 = new Gtk::CheckButton()],
-	    [_("Generic Printers"), my $check44 = new Gtk::CheckButton()],
-								    ),
-				   0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread),
-					     gtksignal_connect(new Gtk::Button(_("OK")), clicked => sub { 
-						 ${$central_widget}->destroy(); import_status() }),
-					     gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub { 
-						 ${$central_widget}->destroy(); create_fontsel() }),
-					     ),
-				   )
-	    );
-    foreach ([$check11, \$gs], [$check22, \$so], [$check33, \$abi], [$check44, \$printer]) {
-	my $ref = $_->[1];
-	gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => sub { ${$ref} = ${$ref} ? 0 : 1; })
-	}
-    $central_widget = \$choice_box;
-    $font_box->show_all();
-}
-
-sub font_choice {
-    my $file_dialog;
-
-    $file_dialog = gtksignal_connect(new Gtk::FileSelection(_("File Selection")), destroy => sub { $file_dialog->destroy(); } );
-    $file_dialog->ok_button->signal_connect(clicked => \&file_ok_sel, $file_dialog);
-    $file_dialog->ok_button->child->set(_("Add"));
-    $file_dialog->cancel_button->signal_connect(clicked => sub { $file_dialog->destroy() });
-    $file_dialog->cancel_button->child->set(_("Close"));
-    $file_dialog->set_filename(_("Select the font file or directory and click on 'Add'"));
-    $file_dialog->show();
-}
-
-sub file_ok_sel { 
-    my ( $widget, $file_selection ) = @_;     
-    my $file_name = $file_selection->get_filename();
-    print "-- @install\n";
-    if(!member($file_name, @install)) {
-	push(@install, $file_name);
-	$list->add(gtkshow(new Gtk::ListItem($file_name)));
-    }
-}
-
-sub list_remove {
-    my($widget, $list) = @_;
-    my @to_remove;
-    push @to_remove, $list->child_position($_) foreach($list->selection);
-    splice @install, $_, 1 foreach(reverse sort @to_remove);
-    $list->remove_items($list->selection);
-}
-
-sub advanced_install {
-    my $scrolled_window;
-    my $adv_box;
-    $list = new Gtk::List();
-    $list->set_selection_mode(-extended);
-    
-    gtkpack($font_box,
-	    $adv_box = gtkpack_(new Gtk::VBox(0,10),
-				1, gtkpack_(new Gtk::HBox(0,4),
-					    1, createScrolledWindow($list),
-					    ),
-				0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread),
-					  gtksignal_connect(new Gtk::Button(_("Add")), clicked => sub { font_choice() }),
-					  gtksignal_connect(new Gtk::Button(_("Remove Selected")), clicked => \&list_remove, $list),
-					  gtksignal_connect(new Gtk::Button(_("Install List")), clicked => sub { 
-					      ${$central_widget}->destroy(); appli_choice()  }),
-#import_status() }),$
-					  ),
-				)
-	    );
-    $central_widget = \$adv_box;
-    $adv_box->show_all();
-}
-
-sub list_to_remove {
-    my @number_to_remove;
-    my @files_path = grep( !/fonts/ ,all($current_path));
-    Gtk->main_iteration while Gtk->events_pending;
-    push @number_to_remove, $path_list->child_position($_) foreach($path_list->selection);
-    @uninstall = ();
-    push @uninstall, $current_path . "/"  . $files_path[$_] foreach (@number_to_remove);
-    ${$central_widget}->destroy(); 
-    show_list_to_remove();
-}
-
-sub show_list_to_remove {
-    my $show_box;
-    my $show_list = new Gtk::List();
-    $show_list->add(gtkshow(new Gtk::ListItem($_))) foreach @uninstall ;
-    gtkpack($font_box,
-	    $show_box = gtkpack_(new Gtk::VBox(0,10),
-				 1, gtkpack_(new Gtk::HBox(0,4),
-					     1, createScrolledWindow($show_list)
-					     ),
-				 0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread),
-					   gtksignal_connect(new Gtk::Button(_("click here if you are sure.")), clicked => 
-							     sub {  ${$central_widget}->destroy(); import_status_uninstall() }),
-					   gtksignal_connect(new Gtk::Button(_("here if no.")), clicked => 
-							     sub {  ${$central_widget}->destroy(); create_fontsel() } ),
-					   ),
-				 )
-	    );
-    $central_widget = \$show_box;
-    $show_box->show_all();
-}
-
-sub uninstall {
-    my $scrolled_window;
-    my $scrolled_window2;
-    my $uninst_box;
-    @install=  ();
-    @installed_fonts_path = ();
-    list_fontpath();    
-    chk_empty_xfs_path();
-    $list_path = new Gtk::List();
-    $list_path->set_selection_mode(-extended);
-    foreach (@installed_fonts_path) {
-	my $t = $_;
-	$list_path->add(gtkshow(gtksignal_connect(new Gtk::ListItem($t), select => sub {
-	    $current_path = $t;
-	    $path_list->clear_items(0, -1);
-	    $path_list->append_items(map { /fonts/ ? () : gtkshow(new Gtk::ListItem($_)) } all($t)); })));
-    }
-    $list_path->set_selection_mode(-single);
-    $path_list = new Gtk::List();
-    $path_list->set_selection_mode(-extended);
-    
-    gtkpack($font_box,
-	    $uninst_box = gtkpack_(new Gtk::VBox(0,10),
-				   1, gtkpack_(new Gtk::HBox(0,4),
-					       1, createScrolledWindow($list_path),
-					       1, createScrolledWindow($path_list)
-					       ),
-				   0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread),
-					     gtksignal_connect(new Gtk::Button(_("Unselected All")), clicked => 
-							       sub {$path_list->unselect_all (); }),
-					     gtksignal_connect(new Gtk::Button(_("Selected All")), clicked => 
-							       sub {$path_list->select_all (); } ),
-					     gtksignal_connect(new Gtk::Button(_("Remove List")), clicked => 
-							       sub { list_to_remove() }),
-					     ),
-				  )
-	    );
-    $central_widget = \$uninst_box;
-    $uninst_box->show_all();
-}
-
-sub import_status {
-    my $table;
-    $pbar =   new Gtk::ProgressBar;
-    $pbar1 =  new Gtk::ProgressBar;
-    $pbar2 =  new Gtk::ProgressBar;
-    $pbar3 =  new Gtk::ProgressBar;
-    gtkpack($font_box,
-	    $table = create_packtable({ col_spacings => 10, row_spacings => 50},
-   ["",""], 
-   [_("Initials tests"), $pbar, $pbar->{label} = new Gtk::Label(' ' )],
-   [_("Copy fonts on your system"), $pbar1,$pbar1->{label} = new Gtk::Label(' ' ) ],
-   [_("Install & convert Fonts"), $pbar2, $pbar2->{label} = new Gtk::Label(' ' ) ],
-   [_("Post Install"), $pbar3,$pbar3->{label} = new Gtk::Label(' ' ) ],
-				      ),
-	    );
-    $central_widget = \$table;
-    $font_box->show_all();
-    Gtk->main_iteration while Gtk->events_pending;
-    backend_mod();
-}
-
-sub import_status_uninstall {
-    my $table;
-    $pbar =   new Gtk::ProgressBar;
-    $pbar1 =  new Gtk::ProgressBar;
-    $pbar2 =  new Gtk::ProgressBar;
-    gtkpack($font_box,
-	    $table = create_packtable({ col_spacings => 10, row_spacings => 50},
-   ["",""], ["",""],
-   [_("Initials tests"), $pbar, $pbar->{label} = new Gtk::Label(' ' )],
-   [_("Remove fonts on your system"), $pbar1,$pbar1->{label} = new Gtk::Label(' ' ) ],
-   [_("Post Uninstall"), $pbar2,$pbar2->{label} = new Gtk::Label(' ' ) ],
-			    ),
-	    );
-    $central_widget = \$table;
-    $font_box->show_all();
-    Gtk->main_iteration while Gtk->events_pending;
-    backend_mod();
-}
-
-sub progress {
-    my ($progressbar, $incr, $label_text) = @_;
-    my($new_val) = $progressbar->get_current_percentage;
-    $new_val += $incr;
-    if ($new_val > 1) {$new_val = 1}
-    $progressbar->update($new_val);
-    $progressbar->{label}->set($label_text);
-    Gtk->main_iteration while Gtk->events_pending;
-}
-
-
-# option strong: verifier strong  ttmkfdir -c ???
-# gestion abiword, netscape, gimp....
-# remove this directory of the de fontpath if there is only 2 files in directory (fonts.dir & fonts.scale)
-# do type1inst in this path
-# peu etre un petit pb avec "/etc/rc.d/init.d/xfs restart"
-#  ?? :$check11->signal_connect( 'toggled',  sub { $gs == 0 and $gs = 1 or $gs = 0; print "gs =  $gs\n" });
diff --git a/perl-install/standalone/drakgw b/perl-install/standalone/drakgw
deleted file mode 100755
index 6ec6599b7..000000000
--- a/perl-install/standalone/drakgw
+++ /dev/null
@@ -1,800 +0,0 @@
-#!/usr/bin/perl
-
-#
-# Guillaume Cottenceau (gc@mandrakesoft.com)
-#
-# Copyright 2000 MandrakeSoft
-#
-# This software may be freely redistributed under the terms of the GNU
-# public license.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-
-use lib qw(/usr/lib/libDrakX);
-
-use interactive;
-use standalone;
-use log;
-use c;
-use network::netconnect;
-use detect_devices;
-use common;
-
-$::isInstall and die "Not supported during install.\n";
-
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: drakgw [--version]\n";
-/-version/ and die 'version: $Id$ '."\n";
-$::Wizard_pix_up = "wiz_drakgw.png";
-$::Wizard_title = _("Internet Connection Sharing");
-$::direct = /-direct/;
-
-
-my $sysconf_network = "/etc/sysconfig/network";
-my $sysconf_dhcpd = "/etc/sysconfig/dhcpd";
-my $rc_firewall_generic = "/etc/rc.d/rc.firewall";
-my $rc_firewall_drakgw = "/etc/rc.d/rc.firewall.inet_sharing";
-my $rc_firewall_22 = "/etc/rc.d/rc.firewall.inet_sharing-2.2";
-my $rc_firewall_24 = "/etc/rc.d/rc.firewall.inet_sharing-2.4";
-my $dhcpd_conf = "/etc/dhcpd.conf";
-my $cups_conf = "/etc/cups/cupsd.conf";
-my $drakgw_setup = "/etc/sysconfig/inet_sharing";
-
-
-my ($kernel_version) = c::kernel_version() =~ /(...)/;
-log::l("[drakgw] kernel_version $kernel_version");
-
-$kernel_version eq '2.2' || $kernel_version eq '2.4' or die "Only for 2.2 or 2.4 kernels.\n";
-
-my $in = 'interactive'->vnew('su', 'default');
-
-!$::isEmbedded && $in->isa('interactive_gtk') and $::isWizard=1;
-
-pur_gtk_mode() if $::isEmbedded && $in->isa('interactive_gtk');
-
-sub sys { system(@_) == 0 or log::l("[drakgw] Warning, sys failed for $_[0]") }
-
-sub outpend { my $f = shift; local *F; open F, ">>$f" or die "outpend in file $f failed: $!\n"; print F foreach @_; }
-
-sub start_daemons ()
-{
-    my $cups_used = 0;
-    log::l("[drakgw] Starting daemons");
-    if (-f "/etc/rc.d/init.d/cups") {
-        if (grep(/is running/, `/etc/rc.d/init.d/cups status`)) {
-           $cups_used = 1;
-           sys("/etc/rc.d/init.d/cups stop");
-        }
-    }
-    grep(/is running/, `/etc/rc.d/init.d/dhcpd status 2> /dev/null`) and sys("/etc/rc.d/init.d/dhcpd stop");
-    grep(/connection refused/, `/etc/rc.d/init.d/named status 2> /dev/null`) or sys("/etc/rc.d/init.d/named stop");
-    sys("/etc/rc.d/init.d/network restart");
-    sys("sh $rc_firewall_generic");
-
-    sys("/etc/rc.d/init.d/$_ start"), sys("/sbin/chkconfig --level 345 $_ on") foreach 'named', 'dhcpd';
-    sys("/etc/rc.d/init.d/cups start") if $cups_used;
-
-    substInFile { s/^INET_SHARING.*\n//; $_ .= "INET_SHARING=enabled\n" if eof } $drakgw_setup;
-}
-
-sub stop_daemons ()
-{
-    log::l("[drakgw] Stopping daemons");
-    grep /is running/, `/etc/rc.d/init.d/dhcpd status` and sys("/etc/rc.d/init.d/dhcpd stop");
-    grep /Connection refused/, `/etc/rc.d/init.d/named status 2>&1` or sys("/etc/rc.d/init.d/named stop");
-    if ($kernel_version eq "2.2") {
-	sys("/sbin/ipchains -F");
-    } else {
-	sys("/sbin/iptables -t nat -F");
-    }
-    sys("/sbin/chkconfig --level 345 $_ off") foreach 'named', 'dhcpd';
-
-    substInFile { s/^INET_SHARING.*\n//; $_ .= "INET_SHARING=disabled\n" if eof } $drakgw_setup;
-}
-
-sub fatal_quit ($)
-{
-    log::l("[drakgw] FATAL: $_[0]");
-    undef $wait_configuring;
-    $in->ask_warn('', $_[0]);
-    quit_global($in, -1);
-}
-
-begin:
-
-#- **********************************
-#- * 0th step: verify if we are already set up
-
-if (-f $drakgw_setup) {
-    $::Wizard_no_previous = 1;
-
-    if (grep(/enabled/, cat_($drakgw_setup))) {
-	my $r = $in->ask_from_list_(_("Internet Connection Sharing currently enabled"),
-_("The setup of Internet connection sharing has already been done.
-It's currently enabled.
-
-What would you like to do?"),
-				   [ __("disable"), __("reconfigure"), __("dismiss") ]) or quit_global($in, 0);
-	if ($r eq "disable") {
-	    {
-		my $wait_disabl = $in->wait_message('', _("Disabling servers..."));
-		stop_daemons();
-	    }
-	    foreach ($dhcpd_conf, $rc_firewall_22, $rc_firewall_24) {
-		renamef($_, "$_.drakgwdisable") or die "Could not rename $_ to $_.drakgwdisable" 
-	    }
-	    log::l("[drakgw] Disabled");
-	    $::Wizard_finished = 1;
-	    $in->ask_okcancel('', _("Internet connection sharing is now disabled."));
-	    quit_global($in, 0);
-	}
-	if ($r eq "dismiss") {
-	    quit_global($in, 0);
-	}
-    }
-    elsif (grep(/disabled/, cat_($drakgw_setup)))
-    {
-	my $r = $in->ask_from_list_(_("Internet Connection Sharing currently disabled"),
-_("The setup of Internet connection sharing has already been done.
-It's currently disabled.
-
-What would you like to do?"),
-				   [ __("enable"), __("reconfigure"), __("dismiss") ]);
-	if ($r eq "enable") {
-	    foreach ($dhcpd_conf, $rc_firewall_22, $rc_firewall_24) {
-		rename($_, "$_.old") if -f $_;
-		rename("$_.drakgwdisable", $_) or die "Could not find configuration. Please reconfigure.";
-	    }
-	    {
-		my $wait_enabl = $in->wait_message('', _("Enabling servers..."));
-		start_daemons();
-	    }
-            log::l("[drakgw] Enabled");
-	    $::Wizard_finished = 1;
-	    $in->ask_okcancel('', _("Internet connection sharing is now enabled."));
-	    quit_global($in, 0);
-	}
-	if ($r eq "dismiss") {
-	    quit_global($in, 0);
-	}
-    }
-    else {
-	log::l("[drakgw] Warning, unrecognized config file, ignoring");
-	renamef($drakgw_setup, "$drakgw_setup.unrecognized");
-    }
-}
-
-
-#- **********************************
-#- * 1st step: detect/setup
-step_ask_confirm:
-
-$::Wizard_no_previous = 1;
-    
-$::direct or $in->ask_okcancel(_("Internet Connection Sharing"),
-_("You are about to configure your computer to share its Internet connection.
-With that feature, other computers on your local network will be able to use this computer's Internet connection.
-
-Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN)."), 1) or quit_global($in, 0);
-
-undef $::Wizard_no_previous;
-
-
-step_detectsetup:
-
-my @configured_devices = map { /ifcfg-(\S+)/ } `ls /etc/sysconfig/network-scripts/ifcfg*`;
-
-my %aliased_devices; 
-/^\s*alias\s+(eth[0-9])\s+(\S+)/ and $aliased_devices{$1} = $2 foreach cat_("/etc/modules.conf");
-
-my $card_netconnect = network::netconnect::get_net_device();
-defined $card_netconnect and log::l("[drakgw] Information from netconnect: ignore card $card_netconnect");
-
-my @cards = grep {
-    log::l("[drakgw] Have network card: $_");
-    $_ ne $card_netconnect
-} detect_devices::getNet();
-log::l("[drakgw] Available network cards: ", join(", ", @cards));
-
-my $format = sub {
-    $aliased_devices{$_[0]} ?
-      _("Interface %s (using module %s)", $_[0], $aliased_devices{$_[0]}) :
-      _("Interface %s", $_[0]);
-};
-
-#- setup the network interface we shall use
-
-my $device;
-if (!@cards)
-{
-    $in->ask_warn(_("No network adapter on your system!"), 
-		  _("No ethernet network adapter has been detected on your system. Please run the hardware configuration tool."));
-    quit_global($in, 0);
-}
-elsif (@cards == 1)
-{
-    $device = $cards[0];
-    $in->ask_okcancel(_("Network interface"),
-_("There is only one configured network adapter on your system:
-
-%s
-
-I am about to setup your Local Area Network with that adapter.", $format->($device)), 1) or goto step_ask_confirm;
-}
-else
-{
-    $device = $in->ask_from_listf(_("Choose the network interface"),
-				    _("Please choose what network adapter will be connected to your Local Area Network."),
-				     $format,
-				    \@cards,
-				    ) or goto step_ask_confirm;
-    defined $device or quit_global($in, 0);
-}
-log::l("[drakgw] Choosing network card: $device\n");
-
-grep(/$device/, @configured_devices) and
-    ($in->ask_okcancel('', _("Warning, the network adapter is already configured. I will reconfigure it.")) or goto step_detectsetup);
-
-
-my $lan_address = "192.168.0";
-
-
-#- test for potential conflict with other networks
-
-foreach (grep { $_ ne $device } @configured_devices)
-{
-    grep(/$lan_address/, cat_("/etc/sysconfig/network-scripts/ifcfg-$_")) and
-      ($in->ask_warn('', _("Potential LAN address conflict found in current config of %s!\n", $_)) or goto step_detectsetup);
-}
-
-
-#- test for potential conflict with previous firewall config
-
-if ($kernel_version eq '2.2') {
-    if (-f '/etc/sysconfig/ipchains' || -x '/sbin/ipchains' && listlength(`/sbin/ipchains -nL`) > 3) {
-	$in->ask_okcancel(_("Firewalling configuration detected!"),
-			  _("Warning! An existing firewalling configuration has been detected. You may need some manual fix after installation.")) or goto step_detectsetup;
-    }
-} else {
-    system('modprobe iptable_nat');
-    if (-f '/etc/sysconfig/iptables' || -x '/sbin/iptables' && listlength(`/sbin/iptables -t nat -nL`) > 8) {
-	$in->ask_okcancel(_("Firewalling configuration detected!"),
-			  _("Warning! An existing firewalling configuration has been detected. You may need some manual fix after installation.")) or goto step_detectsetup;
-    }
-}
-
-
-#- **********************************
-#- * 2nd step: configure
-
-$wait_configuring = $in->wait_message(_("Configuring..."), 
-				      _("Configuring scripts, installing software, starting servers..."));
-
-
-#- setup the /etc/sysconfig/network-script/ script
-
-my $network_scripts = "/etc/sysconfig/network-scripts";
-my $ifcfg = "$network_scripts/ifcfg-$device";
-renamef($ifcfg, "$network_scripts/old.ifcfg-$device");
-output($ifcfg, qq(DEVICE=$device
-BOOTPROTO=static
-IPADDR=$lan_address.1
-NETMASK=255.255.255.0
-NETWORK=$lan_address.0
-BROADCAST=$lan_address.255
-ONBOOT=yes
-));
-
-
-#- install and setup the RPM packages
-
-my $rpms_to_install;
-my %rpm2file = ( ipchains => '/sbin/ipchains',
-		 iptables => '/sbin/iptables',
-		 'dhcp-server' => '/usr/sbin/dhcpd',
-		 bind => '/usr/sbin/named',
-		 'caching-nameserver' => '/var/named/named.local');
-
-#- first: try to install all in one step
-my @needed_to_install = grep { !-e $rpm2file{$_} } keys %rpm2file;
-@needed_to_install and $in->do_pkgs->install(@needed_to_install);
-#- second: try one by one if failure detected
-if (grep { !-e $rpm2file{$_} } keys %rpm2file) {
-    foreach (keys %rpm2file) {
-	-e $rpm2file{$_} or $in->do_pkgs->install($_);
-	-e $rpm2file{$_} or fatal_quit(_("Problems installing package %s", $_));
-    }
-}
-
-
-#- setup the masquerading configuration
-
-if (!-f $rc_firewall_generic) {
-    output($rc_firewall_generic, "#!/bin/sh
-#
-# Automatically generated by drakgw
-[ -x $rc_firewall_drakgw ] && $rc_firewall_drakgw
-");
-    chmod 0700, $rc_firewall_generic;
-}
-elsif (!grep(/drakgw/, cat_($rc_firewall_generic))) {
-    outpend($rc_firewall_generic, "
-# Automatically added by drakgw
-[ -x $rc_firewall_drakgw ] && $rc_firewall_drakgw
-
-");
-}
-
-output($rc_firewall_drakgw, q(#!/bin/sh
-KERNELMAJ=`uname -r | sed                   -e 's,\..*,,'`
-KERNELMIN=`uname -r | sed -e 's,[^\.]*\.,,' -e 's,\..*,,'`
-
-if [ "$KERNELMAJ" -eq 2 -a "$KERNELMIN" -eq 2 ]; then
-    [ -x ) . $rc_firewall_22 . ' ] && ' . $rc_firewall_22 . q(
-fi
-if [ "$KERNELMAJ" -eq 2 -a "$KERNELMIN" -eq 4 ]; then
-    [ -x ) . $rc_firewall_24 . ' ] && ' . $rc_firewall_24 . q(
-fi
-    ));
-
-chmod 0700, $rc_firewall_drakgw;
-
-
-output($rc_firewall_22, 
-qq(#!/bin/sh
-#
-# rc.firewall - Initial SIMPLE IP Masquerade test for 2.1.x and 2.2.x kernels using IPCHAINS
-#
-# Load all required IP MASQ modules
-#
-#   NOTE:  Only load the IP MASQ modules you need.  All current IP MASQ modules
-#          are shown below but are commented out from loading.
-
-# Needed to initially load modules
-#
-/sbin/depmod -a
-
-# Supports the proper masquerading of FTP file transfers using the PORT method
-#
-/sbin/modprobe ip_masq_ftp
-
-# Supports the masquerading of RealAudio over UDP.  Without this module,
-#       RealAudio WILL function but in TCP mode.  This can cause a reduction
-#       in sound quality
-#
-/sbin/modprobe ip_masq_raudio
-
-# Supports the masquerading of IRC DCC file transfers
-#
-/sbin/modprobe ip_masq_irc
-
-
-# Supports the masquerading of Quake and QuakeWorld by default.  This modules is
-#   for for multiple users behind the Linux MASQ server.  If you are going to play
-#   Quake I, II, and III, use the second example.
-#
-#   NOTE:  If you get ERRORs loading the QUAKE module, you are running an old
-#   -----  kernel that has bugs in it.  Please upgrade to the newest kernel.
-#
-#Quake I / QuakeWorld (ports 26000 and 27000)
-#/sbin/modprobe ip_masq_quake
-#
-#Quake I/II/III / QuakeWorld (ports 26000, 27000, 27910, 27960)
-/sbin/modprobe ip_masq_quake 26000,27000,27910,27960
-
-
-# Supports the masquerading of the CuSeeme video conferencing software
-#
-/sbin/modprobe ip_masq_cuseeme
-
-#Supports the masquerading of the VDO-live video conferencing software
-#
-/sbin/modprobe ip_masq_vdolive
-
-
-#CRITICAL:  Enable IP forwarding since it is disabled by default since
-#
-#           Redhat Users:  you may try changing the options in /etc/sysconfig/network from:
-#
-#                       FORWARD_IPV4=false
-#                             to
-#                       FORWARD_IPV4=true
-#
-echo 1 > /proc/sys/net/ipv4/ip_forward
-
-
-# Dynamic IP users:
-#
-#   If you get your IP address dynamically from SLIP, PPP, or DHCP, enable this following
-#       option.  This enables dynamic-ip address hacking in IP MASQ, making the life 
-#       with Diald and similar programs much easier.
-#
-#echo 1 > /proc/sys/net/ipv4/ip_dynaddr
-
-
-# MASQ timeouts
-#
-#   2 hrs timeout for TCP session timeouts
-#  10 sec timeout for traffic after the TCP/IP "FIN" packet is received
-#  160 sec timeout for UDP traffic (Important for MASQ'ed ICQ users) 
-#
-/sbin/ipchains -M -S 7200 10 160
-
-
-# DHCP:  For people who receive their external IP address from either DHCP or BOOTP
-#        such as ADSL or Cablemodem users, it is necessary to use the following
-#        before the deny command.  The "bootp_client_net_if_name" should be replaced
-#        the name of the link that the DHCP/BOOTP server will put an address on to?
-#        This will be something like "eth0", "eth1", etc.
-#
-#        This example is currently commented out.
-#
-#
-#/sbin/ipchains -A input -j ACCEPT -i bootp_clients_net_if_name -s 0/0 67 -d 0/0 68 -p udp
-
-# Enable simple IP forwarding and Masquerading
-#
-#  NOTE:  The following is an example for an internal LAN address in the 192.168.0.x
-#         network with a 255.255.255.0 or a "24" bit subnet mask.
-#
-#         Please change this network number and subnet mask to match your internal LAN setup
-#
-/sbin/ipchains -P forward DENY
-/sbin/ipchains -A forward -s $lan_address.0/24 -j MASQ
-
-# Let incoming packets arrive to our interface, in case there are some firewall rules to come
-/sbin/ipchains -A input -i $device -j ACCEPT
-));
-chmod 0700, $rc_firewall_22;
-
-
-output($rc_firewall_24, qq(#!/bin/sh
-# Load the NAT module (this pulls in all the others).
-modprobe iptable_nat
-
-# Turn on IP forwarding
-echo 1 > /proc/sys/net/ipv4/ip_forward
-
-# In the NAT table (-t nat), Append a rule (-A) after routing (POSTROUTING)
-# which says to MASQUERADE the connection (-j MASQUERADE).
-/sbin/iptables -t nat -A POSTROUTING -s $lan_address.0/24 -j MASQUERADE
-
-# Allows forwarding specifically to our LAN
-/sbin/iptables -A FORWARD -s $lan_address.0/24 -j ACCEPT
-
-# Allow dhcp requests
-/sbin/iptables -A INPUT -i $device -p udp --sport bootpc --dport bootps -j ACCEPT
-/sbin/iptables -A INPUT -i $device -p tcp --sport bootpc --dport bootps -j ACCEPT
-/sbin/iptables -A INPUT -i $device -p udp --sport bootps --dport bootpc -j ACCEPT
-/sbin/iptables -A INPUT -i $device -p tcp --sport bootps --dport bootpc -j ACCEPT
-
-# Allow dns requests
-/sbin/iptables -A INPUT -i $device -p udp --dport domain -j ACCEPT
-/sbin/iptables -A INPUT -i $device -p tcp --dport domain -j ACCEPT
-));
-chmod 0700, $rc_firewall_24;
-
-
-#- be sure that FORWARD_IPV4 is enabled in /etc/sysconfig/network
-
-substInFile { s/^FORWARD_IPV4.*\n//; $_ .= "FORWARD_IPV4=true\n" if eof } $sysconf_network;
-
-
-#- setup the DHCP server
-
-renamef($dhcpd_conf, "$dhcpd_conf.old");
-output($dhcpd_conf, qq(subnet $lan_address.0 netmask 255.255.255.0 {
-	# default gateway
-	option routers $lan_address.1;
-	option subnet-mask 255.255.255.0;
-
-	option domain-name "homelan.org";
-	option domain-name-servers $lan_address.1;
-
-	range dynamic-bootp $lan_address.16 $lan_address.253;
-	default-lease-time 21600;
-	max-lease-time 43200;
-}
-));
-my $update_dhcp = '/usr/sbin/update_dhcp.pl';
--e $update_dhcp and system($update_dhcp);
-
-
-#- put the interface for the dhcp server in the sysconfig-dhcp config, for the /etc/init.d script of dhcpd
-
-substInFile { s/^INTERFACES\n//; $_ .= "INTERFACES=\"$device\"\n" if eof } $sysconf_dhcpd;
-
-
-#- Set up /etc/cups/cupsd.conf to make the broadcasting of the printer info
-#- working correctly: 
-#- 
-#-  1. ServerName <server's IP address>  # because clients do necessarily 
-#-                                       # know the server's name
-#-
-#-  2. BrowseAddress <server's Broadcast IP> # broadcast printer info into
-#-                                           # the local network.
-#-
-#-  3. BrowseOrder Deny,Allow
-#-     BrowseDeny All
-#-     BrowseAllow <IP mask for local net> # Only accept broadcast signals 
-#-                                         # coming from local network
-#-
-#-  4. <Location />
-#-     Order Deny,Allow
-#-     Deny From All
-#-     Allow From <IP mask for local net> # Allow only machines of local 
-#-     </Location>                        # network to access the server
-#-     
-#- These steps are only done when the CUPS package is installed.
-
-substInFile {
-    s/^ServerName[^:].*\n//; $_ .= "ServerName $lan_address.1\n" if eof;
-    s/^BrowseAddress.*\n//; $_ .= "BrowseAddress $lan_address.255\n" if eof;
-    s/^BrowseOrder.*\n//; $_ .= "BrowseOrder Deny,Allow\n" if eof;
-    s/^BrowseDeny.*\n//; $_ .= "BrowseDeny All\n" if eof;
-    s/^BrowseAllow.*\n//; $_ .= "BrowseAllow $lan_address.*\n" if eof;
-} $cups_conf;
-
-
-#- Modify the root location block in /etc/cups/cupsd.conf
-
-if (-f $cups_conf) {
-    my @cups_conf_content = cat_($cups_conf);
-    my @root_location; my $root_location_start; my $root_location_end;
-
-    # Cut out the root location block so that it can be treated seperately
-    # without affecting the rest of the file
-    if (grep(m|^\s*<Location\s+/\s*>|, @cups_conf_content)) {
-	$root_location_start = -1;
-	$root_location_end = -1;
-	# Go through all the lines, bail out when start and end line found
-	for (my $i = 0; $i < @cups_conf_content && $root_location_end == -1; $i++) {
-	    if ($cups_conf_content[$i] =~ m|^\s*<\s*Location\s+/\s*>|) {
-		$root_location_start = $i;
-	    } elsif (($cups_conf_content[$i] =~ m|^\s*<\s*/Location\s*>|) && ($root_location_start != -1)) {
-		$root_location_end = $i;
-	    }
-	}
-	# Rip out the block and store it seperately
-	@root_location = splice(@cups_conf_content, $root_location_start, $root_location_end - $root_location_start + 1);
-    } else {
-	# If there is no root location block, create one
-	$root_location_start = @cups_conf_content;
-	@root_location = ("<Location />\n", "</Location>\n");
-    }
- 
-    # Delete all former "Order", "Allow", and "Deny" lines from the root location block
-    s/^\s*Order.*//, s/^\s*Allow.*//, s/^\s*Deny.*// foreach @root_location;
- 
-    # Add the new "Order" and "Deny" lines, add an "Allow" line for the local network
-    splice(@root_location, -1, 0, $_) foreach ("Order Deny,Allow\n", "Deny From All\n", "Allow From 127.0.0.1\n",
-					       "Allow From $lan_address.*\n");
- 
-    # Put the changed root location block back into the file
-    splice(@cups_conf_content, $root_location_start, 0, @root_location);
- 
-    output $cups_conf, @cups_conf_content;
-}
-
-
-#- start the daemons
-
-substInFile { s/^INTERFACE.*\n//; $_ .= "INTERFACE=$device\n" if eof } $drakgw_setup;
-start_daemons();
-
-
-#- bye-bye message
-
-undef $wait_configuring;
-
-$::Wizard_no_previous = 1;
-$::Wizard_finished = 1;
-
-$in->ask_okcancel(_("Congratulations!"), 
-_("Everything has been configured.
-You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP)."));
-
-
-log::l("[drakgw] Installation complete, exiting\n");
-quit_global($in, 0);
-
-sub quit_global {
-    my ($in, $exitcode) = @_;
-    $in->exit($exitcode);
-    goto begin
-}
-
-sub pur_gtk_mode
-{
-    require Gtk;
-    init Gtk;
-    my $setup_state = grep(/disabled/, cat_($drakgw_setup)) ? _("The setup has already been done, but it's currently disabled.") :
-                      grep(/enabled/, cat_($drakgw_setup))  ? _("The setup has already been done, and it's currently enabled.") :
-                      _("No Internet Connection Sharing has ever been configured.");
-    
-    my $window1 = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window -toplevel;
-    $window1->signal_connect ( delete_event => sub { Gtk->exit(0); });
-    $window1->set_position(1);
-    $window1->set_title(_("Internet connection sharing configuration"));
-    $window1->border_width(10);
-    my $vbox1 = new Gtk::VBox(0,0);
-    $window1->add($vbox1);
-    my $hbox1 = new Gtk::HBox(0,0);
-    $vbox1->pack_start($hbox1,1,1,0);
-    my $label1 = new Gtk::Label(
-_("Welcome to the Internet Connection Sharing utility!
-
-%s
-
-Click on Configure to launch the setup wizard.", $setup_state));
-    $hbox1->pack_start($label1,1,1,0);
-    my $hbox2 = new Gtk::HBox(0,0);
-    $vbox1->pack_start($hbox2,1,1,0);
-    
-    my $bbox1 = new Gtk::HButtonBox;
-    $vbox1->pack_start($bbox1,0,0,0);
-    $bbox1->set_layout(-end);
-    my $button_conf = new Gtk::Button _("Configure");
-    $button_conf->signal_connect ( clicked => sub {
-					   system("/usr/sbin/drakgw --wizard");
-				       });
-    $bbox1->add($button_conf);
-    my $button_cancel = new Gtk::Button _("Cancel");
-    $button_cancel->signal_connect ( clicked => sub {
-					 kill(USR1, $::CCPID);
-				     });
-    $bbox1->add($button_cancel);
-    $window1->show_all();
-    Gtk->main_iteration while Gtk->events_pending;
-    $::isEmbedded and kill USR2, $::CCPID;
-    Gtk->main;
-    Gtk->exit(0);
-    
-}
-
-
-
-
-
-
-#-------------------------------------------------
-#- $Log$
-#- Revision 1.56  2001/10/30 19:10:41  gc
-#- use isa rather than ref to test if we're gtk
-#-
-#- Revision 1.55  2001/10/02 10:28:14  gc
-#- don't call pkgs_install when no package needs to be installed
-#-
-#- Revision 1.54  2001/09/18 20:36:20  damien
-#- debug
-#-
-#- Revision 1.53  2001/09/12 10:57:01  damien
-#- corrected wizard mode in newt mode
-#-
-#- Revision 1.52  2001/09/06 15:38:09  gc
-#- works now ;p
-#-
-#- Revision 1.51  2001/08/29 21:52:34  gc
-#- quit_global
-#-
-#- Revision 1.50  2001/08/18 00:06:32  siegel
-#- fixed i18n
-#-
-#- Revision 1.49  2001/08/09 09:35:37  gc
-#- use vnew the right way everywhere
-#-
-#- Revision 1.48  2001/08/09 09:15:38  gc
-#- - if package installs fail, redo one by one to know which one failed
-#- - try to not end up with a failing configuration file, if program is brutally stopped
-#- - if unrecognized config file, don't fail, rather ignore it and proceed
-#- - run dhcpd_update feature (if present) after setup of dhcp server
-#-
-#- Revision 1.47  2001/08/08 18:26:31  prigaux
-#- add interactive_pkgs stuff
-#-
-#- Revision 1.46  2001/08/06 13:11:35  yduret
-#- use MDK::Common;
-#- use network::netconnect; and update functions call from netconnect
-#-
-#- Revision 1.45  2001/07/24 22:39:28  prigaux
-#- move to MDK::Common, bool->to_bool
-#-
-#- Revision 1.44  2001/05/16 11:13:21  damien
-#- added icon management
-#-
-#- Revision 1.43  2001/05/15 14:36:31  gc
-#- full path for iptables
-#-
-#- Revision 1.42  2001/04/12 13:50:24  gc
-#- add some rule so later on tinyfirewall will not prevent everything from working
-#-
-#- Revision 1.41  2001/04/11 15:28:36  gc
-#- kosmetik
-#-
-#- Revision 1.40  2001/04/11 15:16:34  gc
-#- do i18n for title also
-#-
-#- Revision 1.39  2001/04/10 21:33:15  gc
-#- add INTERFACE param in sysconfig parameter for smooth interoperation with bastille-firewall
-#-
-#- Revision 1.38  2001/04/09 18:09:38  yduret
-#- deyvounification : remove some un-useful comments in code
-#-
-#- Revision 1.37  2001/04/09 16:29:20  gc
-#- do not die when an initscript returns non-0 (initscripts too buggy)
-#-
-#- Revision 1.36  2001/04/09 11:39:40  gc
-#- fix for when there is an already existing rc.firewall
-#- complies with old format of drakgw so that upgrades will work
-#-
-#- Revision 1.35  2001/04/08 05:33:14  damien
-#- updated
-#-
-#- Revision 1.34  2001/04/06 15:09:15  yduret
-#- swap cancel/configure button
-#-
-#- Revision 1.33  2001/04/06 14:12:06  gc
-#- - correct yvounetification in i18n stuff
-#- - remove some remaining debugging printings
-#- - add a bit more of explanations when starting drakgw in wizard mode
-#-
-#- Revision 1.32  2001/04/06 01:34:44  yduret
-#- recoded a embedded && gtk mode
-#-
-#- Revision 1.31  2001/03/31 14:21:10  pablo
-#- Updated po files and help messages (patch from Pixel)
-#-
-#- Revision 1.30  2001/03/29 11:52:15  damien
-#- updated for new wiz png policy
-#-
-#- Revision 1.29  2001/03/26 15:29:01  gc
-#- first attempt at pixelization of code (till's cups patches)
-#-
-#- Revision 1.28  2001/03/21 18:07:36  gc
-#- honour embedded mode
-#-
-#- Revision 1.27  2001/03/13 16:23:29  gc
-#- fix for bind
-#-
-#- Revision 1.26  2001/03/13 15:31:05  gc
-#- - fix destructive parts of pixelization
-#- - fix some own bugs
-#-
-#- Revision 1.25  2001/03/13 00:00:11  prigaux
-#- pixelization
-#-
-#- Revision 1.24  2001/03/12 18:26:16  gc
-#- - make it work as a wizard
-#- - make it work with iptables (kernel-2.4)
-#-
-#- Revision 1.23  2001/03/01 00:18:17  damien
-#- updated embedded mode
-#-
-#- Revision 1.22  2001/02/26 18:39:12  prigaux
-#- pixelization
-#-
-#- Revision 1.21  2001/02/08 10:11:37  damien
-#- implemented or updated embedded mode
-#-
-#- Revision 1.20  2001/02/08 07:00:41  damien
-#- added embedded and (ugly) wizard mode.
-#-
-#- Revision 1.19  2001/01/10 00:32:42  prigaux
-#- use standalone and standalone::pkgs_install
-#-
-#- Revision 1.18  2000/12/16 16:13:34  prigaux
-#- use ldetect-lst
-#-
-#- Revision 1.17  2000/11/13 15:48:33  gc
-#- Integrate Till's patches for better work with Cups.
-#-
-#- Revision 1.16  2000/10/10 15:31:50  gc
-#- make only one call to urpmi in order to install all the needed rpm's
-#-
diff --git a/perl-install/standalone/draknet b/perl-install/standalone/draknet
deleted file mode 100755
index 33577f62e..000000000
--- a/perl-install/standalone/draknet
+++ /dev/null
@@ -1,689 +0,0 @@
-#!/usr/bin/perl
-
-# DrakNet
-
-# Copyright (C) 1999 MandrakeSoft (damien@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use lib qw(/usr/lib/libDrakX);
-
-use interactive;
-use standalone;
-use common;
-use network::netconnect;
-use network::ethernet;
-use network::tools;
-use network;
-use c;
-use MDK::Common;
-use any;
-use network::isdn;
-use network::adsl;
-use MDK::Common::Globals "network", qw($in $prefix $disconnect_file $connect_prog $connect_file $disconnect_file);
-
-my $xpm_path="/usr/share/libDrakX/pixmaps";
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-$::isWizard = "@ARGV" =~ /--wizard/;
-$::expert = "@ARGV" =~ /--expert/;
-local $_ = join '', @ARGV;
-
-#/-h/ and die "usage: draknet[--xf3] [--beginner] [--expert] [--auto] [--noauto] [--skiptest] [--testing]\n";
-
-my $netcnx = {};
-my $netc = {};
-my $intf = {};
-my @conx_type = ('modem', 'isdn_internal', 'isdn_external', 'adsl', 'cable', 'lan' );
-
-#$::wizard_xpm = "/usr/share/pixmaps/internet.xpm";
-
-my $in = 'interactive'->vnew('su', 'network');
-!$::isEmbedded && $in->isa('interactive_gtk') and $::isWizard=1;
-$::Wizard_pix_up = "wiz_draknet.png";
-$::Wizard_title = "Network & Internet Configuration";
-
-MDK::Common::Globals::init(
-	      in => $in,
-	      prefix => '',
-	      connect_file => "/etc/sysconfig/network-scripts/net_cnx_up",
-	      disconnect_file => "/etc/sysconfig/network-scripts/net_cnx_down",
-	      connect_prog => "/etc/sysconfig/network-scripts/net_cnx_pg"
-	     );
-
-$::isEmbedded && ref($in) =~ /gtk/ or goto dd;
-require Gtk;
-init Gtk;
-require my_gtk;
-import my_gtk qw(:helpers :wrappers);
-my $expert_mode=0;
-network::netconnect::read_net_conf('', $netcnx, $netc);
-any::setup_thiskind_backend('net', undef);
-my @all_cards = network::ethernet::conf_network_card_backend ($netc, $intf, undef, undef, undef, undef);
-network::netconnect::load_conf($netcnx, $netc, $intf);
-
-my $window1 = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window -toplevel;
-$window1->signal_connect ( delete_event => sub { Gtk->exit(0); });
-$window1->set_position(1);
-$window1->set_title(_("Network configuration (%d adapters)", @all_cards));
-$window1->border_width(10);
-$::isEmbedded or $window1->set_usize(500, 400);
-my $vbox1 = new Gtk::VBox(0,10);
-$window1->add($vbox1);
-my $hbox1 = new Gtk::HBox(0,0);
-$vbox1->pack_start($hbox1,0,0,0);
-$hbox1->pack_start(new Gtk::Label(_("Profile: ")),0,0,0);
-
-my $combo1 = new Gtk::Combo;
-$combo1->set_popdown_strings (network::netconnect::get_profiles() );
-my $old_profile=$netcnx->{PROFILE};
-$combo1->entry->set_text($netcnx->{PROFILE} ? $netcnx->{PROFILE} : "default");
-$combo1->entry->set_editable(0);
-$hbox1->pack_start($combo1,0,0,0);
-my $button_del = new Gtk::Button(_("Del profile..."));
-$button_del->signal_connect( clicked => sub {
-				 my $dialog = new Gtk::Dialog();
-				 $dialog->set_position(1);
-				 $dialog->vbox->set_border_width(10);
-				 $dialog->signal_connect ( delete_event => sub { Gtk->main_quit(); });
-				 $dialog->vbox->pack_start(new Gtk::Label(_("Profile to delete:")),1,1,0);
-				 my $combo_dialog = new Gtk::Combo;
-				 $combo_dialog->set_popdown_strings ( grep { ! /default/ } network::netconnect::get_profiles() );
-				 $combo_dialog->entry->set_editable(0);
-				 $dialog->vbox->pack_start($combo_dialog,1,1,0);
-				 my $bbox_dialog = new Gtk::HButtonBox;
-				 $dialog->action_area->add($bbox_dialog);
-				 $bbox_dialog->set_layout(-end);
-				 my $button_ok = new Gtk::Button _("OK");
-				 $button_ok->signal_connect ( clicked => sub {
-								  network::netconnect::del_profile($netcnx, $combo_dialog->entry->get_text());
-								  $netcnx->{PROFILE} eq $combo_dialog->entry->get_text() and $netcnx->{PROFILE}="default";
-								  Gtk->main_quit();
-							      });
-				 $bbox_dialog->add($button_ok );
-				 my $button_cancel = new Gtk::Button _("Cancel");
-				 $button_cancel->signal_connect ( clicked => sub { Gtk->main_quit(); });
-				 $bbox_dialog->add($button_cancel);
-				 $dialog->show_all;
-				 $dialog->set_modal(1);
-				 Gtk->main();
-				 $dialog->destroy;
-				 $combo1->entry->set_text((-e "/etc/sysconfig/network-scripts/draknet_conf." . $combo1->entry->get_text) ? $combo1->entry->get_text : "default");
-				 $combo1->set_popdown_strings(network::netconnect::get_profiles());
-				 apply();
-			     });
-$hbox1->pack_start($button_del,0,0,5);
-$button_del->set_sensitive(network::netconnect::get_profiles() > 1);
-my $button_new = new Gtk::Button(_("New profile..."));
-$button_new->signal_connect( clicked => sub {
-				 my $dialog = new Gtk::Dialog();
-				 $dialog->set_position(1);
-				 $dialog->vbox->set_border_width(10);
-				 $dialog->signal_connect ( delete_event => sub { Gtk->main_quit(); });
-				 $dialog->vbox->pack_start(new Gtk::Label(_("Name of the profile to create (the new profile is created as a copy of the current one) :")),1,1,0);
-				 my $entry_dialog = new Gtk::Entry;
-				 $dialog->vbox->pack_start($entry_dialog,1,1,0);
-				 my $bbox_dialog = new Gtk::HButtonBox;
-				 $dialog->action_area->add($bbox_dialog);
-				 $bbox_dialog->set_layout(-end);
-				 my $button_ok = new Gtk::Button _("OK");
-				 $button_ok->signal_connect ( clicked => sub {
-								  network::netconnect::add_profile($netcnx, $entry_dialog->get_text());
-								  $netcnx->{PROFILE} = $entry_dialog->get_text();
-								  Gtk->main_quit();
-							      });
-				 $bbox_dialog->add($button_ok );
-				 my $button_cancel = new Gtk::Button _("Cancel");
-				 $button_cancel->signal_connect ( clicked => sub { Gtk->main_quit(); });
-				 $bbox_dialog->add($button_cancel);
-				 $dialog->show_all;
-				 $dialog->set_modal(1);
-				 Gtk->main();
-				 $dialog->destroy;
-				 $combo1->entry->set_text((-e "/etc/sysconfig/network-scripts/draknet_conf." . $netcnx->{PROFILE}) ? $netcnx->{PROFILE} : "default");
-				 $combo1->set_popdown_strings(network::netconnect::get_profiles());
-});
-$hbox1->pack_start($button_new,0,0,5);
-my $hbox2 = new Gtk::HBox(0,0);
-$vbox1->pack_start($hbox2,0,0,0);
-$hbox2->pack_start(new Gtk::Label(_("Hostname: ")),0,0,0);
-my $hostname = chomp_(`hostname`);
-my $label_host = new Gtk::Label($hostname);
-$hbox2->pack_start($label_host,0,0,0);
-
-#$vbox1->pack_start(new Gtk::HSeparator,1,1,5);
-
-my $frame1 = new Gtk::Frame (_("Internet access"));
-$vbox1->pack_start($frame1,1,1,0);
-my $vbox_frame1 = new Gtk::VBox(0,0);
-$vbox_frame1->set_border_width(5);
-$frame1->add($vbox_frame1);
-my $table1 = new Gtk::Table (3,3, 0);
-$table1->set_border_width(5);
-$table1->set_row_spacings(5);
-$table1->set_col_spacings(5);
-#$table1->border_width(10);
-$vbox_frame1->pack_start($table1,1,1,0);
-#attach (table, child, left_attach, right_attach, top_attach, bottom_attach, xoptions, yoptions, xpadding, ypadding)
-#$table->attach($button[0], 0, 1, 0, 1, {expand=>1,fill=>1}, {expand=>1,fill=>1},0,0);
-$table1->attach(new Gtk::Label(_("Type:")), 0, 1, 0, 1, 'fill', 'fill',0,0);
-my $label4 = new Gtk::Label($netcnx->{type});
-$table1->attach($label4, 1, 2, 0, 1, 'fill', 'fill',0,0);
-my $label5 = new Gtk::Label($netcnx->{type} eq 'lan' ? _("Gateway:") : _("Interface:"));
-$table1->attach($label5, 0, 1, 1, 2, 'fill', 'fill',0,0);
-my $label6 = new Gtk::Label($netcnx->{type} eq 'lan' ? $netc->{GATEWAY} : $netcnx->{NET_INTERFACE});
-$table1->attach($label6, 1, 2, 1, 2, 'fill', 'fill',0,0);
-my $isconnected = -1;
-sub connected_local {
-    print "in connected local\n";
-    my $w = $in->wait_message('', _("Testing your connection..."), 1);
-    Gtk->main_iteration while Gtk->events_pending;
-    $isconnected=connected();
-}
-my $label7 = new Gtk::Label(_("Status:"));
-$table1->attach($label7, 0, 1, 2, 3, 'fill', 'fill',0,0);
-my $label8 = new Gtk::Label(_("Testing your connection..."));
-$table1->attach($label8, 1, 2, 2, 3, 'fill', 'fill',0,0);
-
-my $button2 = new Gtk::Button(_("Wait please"));
-$button2->set_sensitive(0);
-$button2->signal_connect (clicked => sub {
-			      my $dialog = new Gtk::Dialog();
-			      $dialog->signal_connect ( delete_event => sub { Gtk->main_quit(); });
-			      $dialog->set_position(1);
-			      $dialog->vbox->set_border_width(10);
-			      $dialog->signal_connect ( delete_event => sub { Gtk->main_quit(); });
-			      $dialog->vbox->pack_start(my $l = new Gtk::Label(""),1,1,0);
-			      my $bbox_dialog = new Gtk::HButtonBox;
-			      $dialog->action_area->add($bbox_dialog);
-			      $bbox_dialog->set_layout(-end);
-			      my $button_ok = new Gtk::Button _("OK");
-			      $button_ok->signal_connect ( clicked => sub { Gtk->main_quit(); });
-			      $button_ok->set_sensitive(0);
-			      $bbox_dialog->add($button_ok );
-			      $dialog->show_all;
-			      $dialog->set_modal(1);
-			      if (!$isconnected) {
-				  $l->set(_("Starting your connection..."));
-				  Gtk->main_iteration while Gtk->events_pending;
-				  connect_backend();
-				  foreach (1..10) { Gtk->main_iteration while Gtk->events_pending; sleep 1; }
-				  my $up=connected_local();
-				  $l->set($up ? _("The system is now connected to Internet.") : _("The system doesn't seem to be connected to internet.
-Try to reconfigure your connection."));
-			      } else {
-				  $l->set(_("Closing your connection..."));
-				  Gtk->main_iteration while Gtk->events_pending;
-				  disconnect_backend();
-				  foreach (1..10) { Gtk->main_iteration while Gtk->events_pending; sleep 1; }
-				  my $up=connected_local();
-				  $l->set($up ? _("The connection is not closed.
-Try to do it manually by running
-/etc/sysconfig/network-scripts/net_cnx_down
-in root.") : _("The system is now disconnected.") );
-			      }
-			      $button_ok->set_sensitive(1);
-			      Gtk->main();
-			      $dialog->destroy;
-			      update2();
-			  });
-$table1->attach($button2, 2, 3, 2, 3, 'fill', 'fill',0,0);
-
-#$table1->attach($button1, 2, 3, 1, 2, 'fill', 'fill',0,0);
-
-my $hbox_frame1_button = new Gtk::HBox(0,0);
-my $button1 = new Gtk::Button(_("Configure Internet Access..."));
-$button1->signal_connect( clicked => [ \&configure_net, '', $netcnx, $netc, $intf]);
-$hbox_frame1_button->pack_start($button1, 0, 0, 0);
-$vbox_frame1->pack_start($hbox_frame1_button,0,0,0);
-
-#$vbox1->pack_start(new Gtk::HSeparator,1,1,5);
-
-my $frame2 = new Gtk::Frame (_("LAN configuration"));
-$vbox1->pack_start($frame2,1,1,0);
-my $vbox2 = new Gtk::VBox(0,0);
-$vbox2->set_border_width(5);
-$frame2->add($vbox2);
-my $clist1 = new_with_titles Gtk::CList("", _("Interface"), _("IP address"), _("Protocol"), _("Driver"), _("State"));
-$clist1->set_column_auto_resize($_,1) foreach (0..4);
-$clist1->column_titles_passive();
-$clist1->set_shadow_type('etched_out');
-$vbox2->pack_start($clist1, 0, 0, 5);
-#$scrolled1->add_with_viewport($table2);
-
-my $ip_regexp = qr/(\d{1,3})\.(\d{1,3})\.(\d{1,3})\.(\d{1,3})/;
-
-build_clist();
-
-my $hbox3 = new Gtk::HBox(0,0);
-my $button3 = new Gtk::Button(_("Configure Local Area Network..."));
-$button3->signal_connect( clicked => [ \&configure_lan, '', $netcnx, $netc, $intf]);
-$hbox3->pack_start($button3, 0, 0, 0);
-$vbox2->pack_start($hbox3, 0, 0, 0);
-
-#$vbox1->pack_start(new Gtk::HSeparator,0,0,5);
-
-my $bbox0 = new Gtk::HButtonBox;
-$vbox1->pack_start($bbox0,0,0,0);
-$bbox0->set_layout(-end);
-
-
-$bbox0->add(new Gtk::Label(_("Click here to launch the wizard ->")));
-my $button_wizard = new Gtk::Button _("Configure");
-$button_wizard->signal_connect( clicked => sub {
-				     $::isWizard = 1;
-				     system("draknet --wizard");
-# netconnect::intro('', $netcnx, $in);
-				     $combo1->entry->set_text((-e "/etc/sysconfig/network-scripts/draknet_conf." . $combo1->entry->get_text) ? $combo1->entry->get_text : "default");
-				     network::netconnect::load_conf($netcnx, $netc, $intf);
-				     update();
-				 });
-$bbox0->add($button_wizard );
-
-$vbox1->pack_start(new Gtk::HSeparator,0,0,5);
-
-my $bbox1 = new Gtk::HButtonBox;
-$vbox1->pack_start($bbox1,0,0,0);
-$bbox1->set_layout(-end);
-#$bbox1->set_border_width(5);
-
-my $button_expert = new Gtk::Button _("Expert Mode");
-$button_expert->signal_connect ( clicked => sub {
-				     foreach($button1, $button3) { $expert_mode ? $_->hide() : $_->show() }
-				     $button_expert->child->set($expert_mode ? _("Expert Mode") : _("Normal Mode"));
-				     $expert_mode = !$expert_mode;
-				 });
-$bbox1->add($button_expert );
-
-my $button_apply = new Gtk::Button _("Apply");
-$button_apply->signal_connect ( clicked => sub {
-				 apply();
-			     });
-$button_apply->set_sensitive(0);
-$bbox1->add($button_apply);
-
-my $button_cancel = new Gtk::Button _("Cancel");
-$button_cancel->signal_connect ( clicked => sub {
-				     $combo1->entry->set_text($old_profile);
-				     update();
-				     quit_global();
-				 });
-$bbox1->add($button_cancel);
-my $button_ok = new Gtk::Button _("OK");
-$button_ok->signal_connect ( clicked => sub {
-				 my $dialog = new Gtk::Dialog();
-				 $dialog->set_position(1);
-				 $dialog->vbox->set_border_width(10);
-				 my $label = new Gtk::Label(_("Please Wait... Applying the configuration"));
-				 $dialog->signal_connect ( delete_event => sub { Gtk->main_quit(); });
-				 $dialog->vbox->pack_start($label,1,1,20);
-				 $dialog->show_all;
-				 Gtk->main_iteration while Gtk->events_pending;
-				 apply();
-				 $dialog->destroy;
-				 update();
-				 quit_global();
-			     });
-$bbox1->add($button_ok);
-$combo1->entry->signal_connect( 'changed', sub {
-#				    connected() and disconnect_backend();
-				    network::netconnect::set_profile($netcnx, $combo1->entry->get_text());
-				    network::netconnect::load_conf($netcnx, $netc, $intf);
-				    $netcnx->{$_}=$netc->{$_} foreach qw(NET_DEVICE NET_INTERFACE);
-				    network::netconnect::set_net_conf($netcnx, $netc);
-				    update();
-				    $button_apply->set_sensitive(1);
-				});
-
-$window1->show_all();
-$_->hide foreach ($button1, $button3);
-Gtk->main_iteration while Gtk->events_pending;
-$::isEmbedded and kill USR2, $::CCPID;
-my $tag = Gtk->timeout_add(4000, \&update2);
-Gtk->main;
-Gtk->exit(0);
-
-dd:
-network::netconnect::intro('', $netcnx, $in);
-$in->exit(0);
-
-sub build_clist {
-    foreach my $i (0..$#all_cards) {
-	my $ip;
-	if (-e "/sbin/ifconfig") {
-	    local $_=`LC_ALL=C LANG=C LANGUAGE=C LC_MESSAGES=C /sbin/ifconfig "eth$i"`;
-	    /inet addr\:$ip_regexp/; $ip = if_($1 && $2 && $3, "$1.$2.$3.$4");
-	    $_=`LC_ALL=C LANG=C LANGUAGE=C LC_MESSAGES=C /sbin/ifconfig`;
-	    $state = /eth$i/ ? "up" : "down";
-	} else { $ip=$intf->{"eth$_"}{IPADDR}; $state = "n/a"; }
-	$clist1->append("", "eth$i", $ip , $intf->{"eth$i"}{BOOTPROTO}, $all_cards[$i]->[1], $state);
-	$clist1->set_pixmap ($i, 0, gtkcreate_png("eth_card_mini2.png"));
-
-	$clist1->set_selectable($i, 0);
-    }
-}
-
-sub apply {
-    $old_profile=$netcnx->{PROFILE} ? $netcnx->{PROFILE} : "default";
-    network::netconnect::save_conf($netcnx, $netc, $intf);
-
-    $netcnx->{type} eq 'modem' and any::pppConfig($in, $netcnx->{$netcnx->{type}}, '');
-    $netcnx->{type} eq 'isdn_internal' and network::isdn::isdn_write_config_backend($netcnx->{$netcnx->{type}}, 1, $netc, $netcnx); #$light
-    $netcnx->{type} eq 'isdn_external' and any::pppConfig($in, $netcnx->{$netcnx->{type}}, '');
-    $netcnx->{type} eq 'adsl_ppoe' and network::adsl::adsl_conf_backend($netcnx->{$netcnx->{type}}, $netc, 'pppoe', $netcnx);
-    $netcnx->{type} eq 'adsl_pptp' and network::adsl::adsl_conf_backend($netcnx->{$netcnx->{type}}, $netc, 'pptp', $netcnx);
-
-    $netcnx->{dhcp_client} and $netc->{dhcp_client} = $netcnx->{dhcp_client};
-    network::configureNetwork2($in, $prefix, $netc, $intf);
-    $netcnx->{type} =~ /adsl/ or system("/sbin/chkconfig --del adsl 2> /dev/null");
-    system("$prefix/etc/rc.d/init.d/network restart");
-    $button_apply->set_sensitive(0);
-}
-
-sub ethisup { `LC_ALL=C LANG=C LANGUAGE=C LC_MESSAGES=C /sbin/ifconfig` =~ /eth$_[0]/ }
-
-sub update {
-    my $h = chomp_(`hostname`);
-    $label_host->set ($h);
-    $label4->set($netcnx->{type});
-    $label5->set($netcnx->{type} eq 'lan' ? _("Gateway:") : _("Interface:"));
-    $label6->set($netcnx->{type} eq 'lan' ? $netc->{GATEWAY} : $netcnx->{NET_INTERFACE});
-    $clist1->freeze();
-    $clist1->clear();
-    build_clist();
-    $clist1->thaw();
-    $button_del->set_sensitive(network::netconnect::get_profiles() > 1);
-    $isconnected !=-1 or return 1;
-    $label8->set($isconnected ? _("Connected") : _("Not connected"));
-    $button2->child->set($isconnected ? _("Disconnect...") : _("Connect..."));
-    $button2->set_sensitive(1);
-    1;
-}
-
-sub update2 {
-    connected_bg(\$isconnected);
-    update();
-    1;
-}
-sub quit_global {
-    $::isEmbedded ? kill(USR1, $::CCPID) : Gtk->exit(0);
-}
-
-sub configure_lan {
-    my (undef, $prefix, $netcnx, $netc, $intf) = @_;
-    my $window = new Gtk::Window -toplevel;
-
-    my @card_tab;
-
-    if (@all_cards < 1) {
-	my $dialog = new Gtk::Dialog();
-	$dialog->set_position(1);
-	$dialog->vbox->set_border_width(10);
-	$dialog->signal_connect ( delete_event => sub { Gtk->main_quit() });
-	$dialog->vbox->pack_start(new Gtk::Label(_("You don't have any configured interface.
-Configure them first by clicking on 'Configure'")),1,1,0);
-	my $bbox_dialog = new Gtk::HButtonBox;
-	$dialog->action_area->add($bbox_dialog);
-	$bbox_dialog->set_layout(-end);
-	my $button_ok = new Gtk::Button _("OK");
-	$button_ok->signal_connect ( clicked => sub { Gtk->main_quit() });
-	$bbox_dialog->add($button_ok );
-	$dialog->show_all;
-	$dialog->set_modal(1);
-	Gtk->main();
-	$dialog->destroy;
-	return;
-    }
-
-    $window->set_policy (1, 1, 1);
-    $window->signal_connect ( delete_event => sub { Gtk->main_quit; });
-    $window->set_position(1);
-    $window->set_title(_("LAN configuration"));
-    $window->border_width(10);
-    my $vbox1 = new Gtk::VBox(0,0);
-    $window->add($vbox1);
-    $vbox1->pack_start(new Gtk::Label(_("LAN Configuration")),0,1,0);
-    my $notebook = new Gtk::Notebook;
-    $vbox1->pack_start($notebook,0,1,0);
-    my @eth_data;
-    foreach (0..$#all_cards) {
-	my @infos;
-	my @conf_data;
-	$card_tab[2*$_] = \@infos;
-	$card_tab[2*$_+1] = \@conf_data;
-	my $vbox_local=new Gtk::VBox(0,0);
-	$vbox_local->set_border_width(10);
-	$vbox_local->pack_start(new Gtk::Label( _("Adapter %s: %s", $_+1 , "eth$_")),1,1,0);
-	#	Eth${_}Hostname=$netc->{HOSTNAME}
-	#       Eth${_}HostAlias=" . do { $netc->{HOSTNAME} =~ /([^\.]*)\./; $1 } . "
-	#	Eth${_}Driver=$all_cards[$_]->[1]
-        @conf_data = ([_("IP address"), \$intf->{"eth$_"}{IPADDR}],
-			 [_("Netmask"), \$intf->{"eth$_"}{NETMASK}],
-			 [_("Boot Protocol"), \$intf->{"eth$_"}{BOOTPROTO}, ["static", "dhcp", "bootp"]],
-			 [_("Started on boot"), \$intf->{"eth$_"}{ONBOOT} , ["yes", "no"]],
-			 [_("DHCP client"), \$netcnx->{dhcp_client}]
-			);
-	my $i=0;
-	foreach my $j (@conf_data) {
-	    $infos[2*$i]=new Gtk::HBox(0,0);
-	    my $l=new Gtk::Label($j->[0]);
-	    $l->set_justify('left');
-	    $infos[2*$i]->pack_start($l,1,1,0);
-	    $vbox_local->pack_start($infos[2*$i],0,0,0);
-	    if (defined $j->[2]) {
-		my $c=new Gtk::Combo();
-		$c->set_popdown_strings(@{$j->[2]});
-		$infos[2*$i+1]=$c->entry;
-		$infos[2*$i+1]->set_editable(0);
-		$infos[2*$i]->pack_start($c,0,0,0);
-	    } else {
-		$infos[2*$i+1]=new Gtk::Entry();
-		$infos[2*$i]->pack_start($infos[2*$i+1],0,0,0);
-	    }
-	    $infos[2*$i+1]->set_text(${$j->[1]});
-	    $i++;
-	}
-	my $c = $_;
-	$vbox_local->pack_start(gtkpack__(new Gtk::HBox(0,0),
-	  gtksignal_connect(my $b = new Gtk::Button(ethisup($c) ? _("desactivate now") : _("activate now")), clicked => sub {
-				system("/sbin/if".(ethisup($c)?"down":"up")." eth$c");
-				gtkbuttonset($_[0], ethisup($c)?_("desactivate now"):_("activate now"));
-			    })),0,0,0);
-	#	$clist1->append($_+1, "eth$_", $intf->{"eth$_"}{IPADDR}, $intf->{"eth$_"}{BOOTPROTO}, $all_cards[$_]->[1]);
-	#	$clist1->set_selectable($_, 0);
-#	require Data::Dumper;
-#	print "------------\n" . Data::Dumper->Dump([$b],['b']) . "\n";
-	my $hbox_local = new Gtk::HBox(0,0);
-	my $pix = gtkpng("/usr/share/libDrakX/pixmaps/eth_card_mini.png");
-	$hbox_local->pack_start($pix,0,0,0);
-	$hbox_local->pack_start(new Gtk::Label("eth$_"),0,0,0);
-	$hbox_local->show_all;
-	$notebook->append_page($vbox_local, $hbox_local);
-    }
-    my $bbox1 = new Gtk::HButtonBox;
-    $vbox1->pack_start($bbox1,0,0,10);
-    $bbox1->set_layout(-end);
-    my $button_ok = new Gtk::Button( _("OK") );
-    $button_ok->signal_connect ( clicked => sub {
-				     foreach (0..$#all_cards) {
-					 my $i=0;
-					 my @infos = @{$card_tab[2*$_]};
-					 my @conf_data = @{$card_tab[2*$_+1]};
-					 foreach my $j (@conf_data) {
-					     ${$j->[1]}=$infos[2*$i+1]->get_text();
-					     $i++;
-					 }
-				     }
-				     update();
-				     $button_apply->set_sensitive(1);
-				     $window->destroy(); Gtk->main_quit;
-				 });
-    $bbox1->add($button_ok);
-    my $button_cancel = new Gtk::Button( _("Cancel") );
-    $button_cancel->signal_connect ( clicked => sub { $window->destroy(); Gtk->main_quit });
-    $bbox1->add($button_cancel);
-
-    $window->set_modal(1);
-    $window->show_all();
-    foreach (0..$#all_cards) {
-	my @infos = @{$card_tab[2*$_]};
-	$intf->{"eth$_"}{BOOTPROTO} eq "dhcp" or $infos[8]->hide;
-    }
-    $window->set_position('center_always');
-    Gtk->main;
-}
-
-
-sub configure_net {
-    my (undef, $prefix, $netcnx, $netc, $intf) = @_;
-    if (!$netcnx->{type}) {
-	my $dialog = new Gtk::Dialog();
-	$dialog->set_position(1);
-	$dialog->vbox->set_border_width(10);
-	$dialog->signal_connect ( delete_event => sub { Gtk->main_quit(); });
-	$dialog->vbox->pack_start(new Gtk::Label(_("You don't have any internet connection.
-Create one first by clicking on 'Configure'")),1,1,0);
-	my $bbox_dialog = new Gtk::HButtonBox;
-	$dialog->action_area->add($bbox_dialog);
-	$bbox_dialog->set_layout(-end);
-	my $button_ok = new Gtk::Button _("OK");
-	$button_ok->signal_connect ( clicked => sub {
-					 Gtk->main_quit();
-				     });
-	$bbox_dialog->add($button_ok );
-	$dialog->show_all;
-	$dialog->set_modal(1);
-	Gtk->main();
-	$dialog->destroy;
-	return;
-    }
-    my $cnx={};
-    my @infos;
-    $cnx=$netcnx->{$netcnx->{type}};
-    my $auto_detect={};
-    my $window = new Gtk::Window -toplevel;
-    $window->set_policy (1, 1, 1);
-    $window->signal_connect ( delete_event => sub { Gtk->main_quit; });
-    $window->set_position(1);
-    $window->set_title(_("Internet connection configuration"));
-    $window->border_width(10);
-    my $vbox1 = new Gtk::VBox(0,0);
-    $window->add($vbox1);
-    $vbox1->pack_start(new Gtk::Label(_("Internet Connection Configuration")),0,1,0);
-
-    $vbox1->pack_start(new Gtk::HSeparator,0,0,5);
-    my $table1 = new Gtk::Table (2, 4, 0);
-    $table1->set_row_spacings(5);
-    $table1->set_col_spacings(5);
-    $vbox1->pack_start($table1,0,0,0);
-    $table1->attach(new Gtk::Label(_("Profile: ")), 0, 1, 0, 1, 'fill', 'fill',0,0);
-    $table1->attach(new Gtk::Label(_($netcnx->{PROFILE})), 1, 2, 0, 1, 'fill', 'fill',0,0);
-    $table1->attach(new Gtk::Label(_("Connection type: ")), 0, 1, 1, 2, 'fill', 'fill',0,0);
-    $table1->attach(new Gtk::Label(_($netcnx->{type})), 1, 2, 1, 2, 'fill', 'fill',0,0);
-#    my $button1 = new Gtk::Button(_("Reconfigure using wizard..."));
-#    $table1->attach($button1, 2, 4, 0, 2, 'fill', 'fill',0,0);
-    $vbox1->pack_start(new Gtk::HSeparator,0,0,5);
-
-    my $frame1 = new Gtk::Frame (_("Parameters"));
-    $vbox1->pack_start($frame1,1,1,0);
-    my $vbox2 = new Gtk::VBox(0,0);
-    $frame1->add($vbox2);
-    my $i=0;
-    my @conf_data = ([_("Card IRQ"), \$cnx->{irq} ],
-		     [_("Card mem (DMA)"), \$cnx->{mem} ],
-		     [_("Card IO"), \$cnx->{io} ],
-		     [_("Card IO_0"), \$cnx->{io0} ],
-		     [_("Card IO_1"), \$cnx->{io1} ],
-		     [_("Your personal phone number"), \$cnx->{phone_in} ],
-		     [_("Provider name (ex provider.net)"), \$netc->{DOMAINNAME2}],
-		     [_("Provider phone number"), \$cnx->{phone_out} ],
-		     [_("Provider dns 1 (optional)"), \$netc->{dnsServer2}],
-		     [_("Provider dns 2 (optional)"), \$netc->{dnsServer3}],
-		     [_("Account Login (user name)"), \$cnx->{login} ],
-		     [_("Account Password"), \$cnx->{passwd} ],
-		     [_("Dialing mode"), \$cnx->{dialing_mode}, [ "auto", "manual"] ],
-		     [_("Gateway"), \$netc->{GATEWAY}],
-		     [_("Connection name"), \$cnx->{connection} ],
-		     [_("Phone number"), \$cnx->{phone} ],
-		     [_("Login ID"), \$cnx->{login} ],
-		     [_("Password"), \$cnx->{passwd} ],
-		     [_("Authentication"), \$cnx->{auth}, [ _("PAP"), _("Terminal-based"), _("Script-based"), __("CHAP") ] ],
-		     [_("Domain name"), \$cnx->{domain} ],
-		     [_("First DNS Server (optional)"), \$cnx->{dns1} ],
-		     [_("Second DNS Server (optional)"), \$cnx->{dns2} ],
-		     [_("Ethernet Card"), \$netc->{NET_DEVICE}, [ 'eth0', 'eth1', 'eth2', 'eth3', 'eth4', 'eth5','eth6', 'eth7', 'eth8', 'eth9' ]],
-		     [_("DHCP Client"), \$netcnx->{dhcp_client}, ["dhcpcd", "dhcpxd", "dhcp-client"] ],
-		     [_("Connection speed"), \$cnx->{speed}, ["64 Kb/s", "128 Kb/s"]],
-		     [_("Connection timeout (in sec)"), \$cnx->{huptimeout} ]
-);
-    foreach (@conf_data) {
-	$infos[2*$i]=new Gtk::HBox(0,0);
-	my $l=new Gtk::Label($_->[0]);
-	$l->set_justify('left');
-	$infos[2*$i]->pack_start($l,1,1,0);
-	$vbox2->pack_start($infos[2*$i],0,0,0);
-  	if (defined $_->[2]) {
-	    my $c=new Gtk::Combo();
-	    $c->set_popdown_strings(@{$_->[2]});
-	    $infos[2*$i+1]=$c->entry;
-	    $infos[2*$i]->pack_start($c,0,0,0);
-	} else {
-	    $infos[2*$i+1]=new Gtk::Entry();
-	    $infos[2*$i]->pack_start($infos[2*$i+1],0,0,0);
-	}
-	$infos[2*$i+1]->set_text(${$_->[1]});
-  	$i++;
-    }
-    my @mask;
-@mask=(0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0) if $netcnx->{type} eq 'lan';
-@mask=(0,0,0,0,0,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,1,1) if $netcnx->{type} eq'isdn_internal'&& defined $cnx->{vendor} && defined $cnx->{id};
-@mask=(1,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,1,1) if $netcnx->{type} eq'isdn_internal'&&(!defined $cnx->{vendor}||!defined $cnx->{id});
-@mask=(0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,0,0,0,0) if ($netcnx->{type} eq 'modem'||$netcnx->{type} eq 'isdn_external');
-@mask=(0,0,0,0,0,0,1,0,1,1,1,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0) if $netcnx->{type} =~ 'adsl';
-@mask=(0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,0,0) if $netcnx->{type} eq 'cable';
-    $vbox1->pack_start(new Gtk::HSeparator,0,0,5);
-
-
-    my $bbox1 = new Gtk::HButtonBox;
-    $vbox1->pack_start($bbox1,0,0,0);
-    $bbox1->set_layout(-end);
-    my $button_ok = new Gtk::Button _("OK");
-    $button_ok->signal_connect ( clicked => sub {
-				     $i=0;
-				     foreach (@mask) {
-					 if ($_) {
-					     ${$conf_data[$i]->[1]}=$infos[2*$i+1]->get_text();
-					 }
-					 $i++;
-				     }
-				     update();
-				     $button_apply->set_sensitive(1);
-				     $window->destroy(); Gtk->main_quit;
-				 });
-    $bbox1->add($button_ok);
-    my $button_cancel = new Gtk::Button _("Cancel");
-    $button_cancel->signal_connect ( clicked => sub { $window->destroy(); Gtk->main_quit });
-    $bbox1->add($button_cancel);
-
-    $window->set_modal(1);
-    $window->show_all();
-    $i=0;
-    foreach (@mask) {
-	if ($_) { $infos[2*$i]->show }
-	else { $infos[2*$i]->hide; }
-	$i++;
-    }
-    $window->set_position('center_always');
-    Gtk->main;
-}
diff --git a/perl-install/standalone/drakproxy b/perl-install/standalone/drakproxy
deleted file mode 100755
index acfc159ba..000000000
--- a/perl-install/standalone/drakproxy
+++ /dev/null
@@ -1,91 +0,0 @@
-#!/usr/bin/perl
-
-#
-# DindinX (odin@mandrakesoft.com)
-#
-# Copyright 2001 MandrakeSoft
-#
-# This software may be freely redistributed under the terms of the GNU
-# public license.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-
-use lib qw(/usr/lib/libDrakX);
-
-use interactive;
-use standalone;
-use proxy;
-
-use my_gtk qw(:helpers :wrappers);
-# use detect_devices;
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: drakproxy [--version]\n";
-/-version/ and die 'version: drakproxy 1.0 2001/05/22 dindinx'."\n";
-$::isEmbedded or $::isWizard = 1;
-$::Wizard_pix_up = "wiz_drakgw.png";    # FIXME
-$::Wizard_title = _("Proxy handling");
-
-my $in = 'interactive'->vnew('su', 'default');
-
-if ($::isWizard || ($::isEmbedded && $in->isa('interactive_gtk'))) {
-    proxy::main('', $in);
-    $in->exit(0);
-}
-
-# pure gtk_mode
-my $window1 = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window -toplevel;
-$window1->signal_connect ( delete_event => sub { Gtk->exit(0); });
-$window1->set_position(1);
-$window1->set_title(_("Proxy configuration"));
-$window1->border_width(10);
-gtkshow(gtkadd($window1,
-	       gtkpack_(new Gtk::VBox(0,0),
-			1, gtkpack(new Gtk::HBox(0,0),
-				   new Gtk::Label _("Welcome to the Proxy Connection utility
-
-Click on Configure to launch the setup wizard."),
-				  ),
-			1, gtkpack(my $hbox2 = new Gtk::HBox(0,0),),
-			0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -end),
-				  gtksignal_connect(new Gtk::Button(_("Configure")), clicked => sub { system ("/usr/sbin/drakproxy --wizard") }),
-				  gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub { kill(USR1, $::CCPID) }),
-				 )
-		       )
-	      )
-       );
-Gtk->main_iteration while Gtk->events_pending;
-$::isEmbedded and kill USR2, $::CCPID;
-Gtk->main;
-Gtk->exit(0);
-
-#-------------------------------------------------
-#- $Log$
-#- Revision 1.8  2001/10/30 20:11:31  damien
-#- corrected ref($in) =~ /gtk/
-#-
-#- Revision 1.7  2001/08/09 09:35:37  gc
-#- use vnew the right way everywhere
-#-
-#- Revision 1.6  2001/08/08 18:26:31  prigaux
-#- add interactive_pkgs stuff
-#-
-#- Revision 1.5  2001/06/12 12:45:57  odin
-#- ui for drakproxy almost done
-#-
-#- Revision 1.4  2001/06/11 16:34:49  damien
-#- corrected CVS: ----------------------------------------------------------------------
-#-
-#- Revision 1.2  2001/06/11 16:03:10  damien
-#- perlised
-#-
-#- Revision 1.1  2001/06/11 15:22:41  odin
-#- first import of drakproxy
-#-
-#-
diff --git a/perl-install/standalone/draksec b/perl-install/standalone/draksec
deleted file mode 100755
index cf536104c..000000000
--- a/perl-install/standalone/draksec
+++ /dev/null
@@ -1,93 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-
-use common;
-use interactive;
-use standalone;
-use mouse;
-use c;
-
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: draksec [--expert]\n";
-
-$::expert = /-expert/ || cat_("/etc/sysconfig/system") =~ /^CLASS="?expert/m; #"
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-
-my $in = 'interactive'->vnew('su', 'security');
-
-my %m = reverse (my %l = (
-  0 => _("Welcome To Crackers"),
-  1 => _("Poor"),
-  2 => _("Low"),
-  3 => _("Medium"),
-  4 => _("High"),
-  5 => _("Paranoid"),
-));
-my %help = (
-  0 => _("This level is to be used with care. It makes your system more easy to use,
-but very sensitive: it must not be used for a machine connected to others
-or to the Internet. There is no password access."),
-  1 => _("Password are now enabled, but use as a networked computer is still not recommended."),
-  2 => _("Few improvements for this security level, the main one is that there are
-more security warnings and checks."),
-  3 => _("This is the standard security recommended for a computer that will be used
-to connect to the Internet as a client. There are now security checks. "),
-  4 => _("With this security level, the use of this system as a server becomes possible.
-The security is now high enough to use the system as a server which accept
-connections from many clients. "),
-  5 => _("We take level 4 features, but now the system is entirely closed.
-Security features are at their maximum."),
-);
-
-delete @l{0,1,5} unless $::expert;
-delete @help{0,1,5} unless $::expert;
-
-begin:
-$::isEmbedded and kill USR2, $::CCPID;
-
-
-#$in->ask_from('',
-#	      _("Choose security level")  . "\n\n" . join('', map { "$l{$_}: $help{$_}\n\n" } keys %l),
-#	      { label => _($st->{$f}{text}), val => \$def_choice, list => [ 'replay', 'manual' ] },
-#	      { label => _($st->{$f}{text}), val => \$def_choice, list => [ 'replay', 'manual' ] }
-#	     )
-
-my $libsafe;
-my $secure_level;
-if (-e "$prefix/etc/profile.d/msec.sh") {
-    local $_ = cat_("$prefix/etc/profile.d/msec.sh");
-    /export SECURE_LEVEL=(\d+)/ and $secure_level = $1;
-}
-$secure_level ||= $ENV{SECURE_LEVEL};
-$secure_level ||= 2;
-$secure_level = $l{$secure_level};
-
-my %h = getVarsFromSh("$prefix/etc/sysconfig/system");
-$libsafe = $h{LIBSAFE} =~ /yes/i;
-
-if ($in->ask_from('', _("Choose security level") . "\n\n" .
-		       join('', map { "$l{$_}: $help{$_}\n\n" } keys %l),
-		       [
-			{ label => _("Security level"), val => \$secure_level, list => [ (values %l) ] },
-		        if_(pkgs_interactive::is_installed('libsafe') && arch() =~ /^i.86/,
-			    { label => _("Use libsafe for servers"), val => \$libsafe, type => 'bool', text =>
-			      _("A library which defends against buffer overflow and format string attacks.") }
-			   )
-		       ]
-		      )) {
-    my $w = $in->wait_message('', _("Setting security level"));
-    $in->suspend;
-
-    $ENV{LILO_PASSWORD} = ''; # make it non interactive
-    system "/usr/sbin/msec", $m{$secure_level};
-    my %t = getVarsFromSh("$prefix/etc/sysconfig/system");
-
-    $t{LIBSAFE} = bool2yesno($libsafe);
-    setVarsInSh("$prefix/etc/sysconfig/system", \%t);
-    $in->resume;
-}
-
-!$::isEmbedded ? $in->exit(0) : kill(USR1, $::CCPID);
-goto begin;
diff --git a/perl-install/standalone/drakxconf b/perl-install/standalone/drakxconf
deleted file mode 100755
index 51530940d..000000000
--- a/perl-install/standalone/drakxconf
+++ /dev/null
@@ -1,53 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-
-
-use interactive;
-use standalone;
-use keyboard;
-use Xconfigurator_consts;
-use common;
-use c;
-
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: drakxconf\n";
-/-version/ and die "version: $Id$\n";
-
-my $in = 'interactive'->vnew('su', 'default');
-my @l=(
-       { des => 'Display Configuration',
-	 cmd => 'XFdrake'},
-       { des => 'KeyBoard Configuration',
-	 cmd => 'keyboarddrake'},
-       { des => 'Mouse Configuration',
-	 cmd => 'mousedrake'},
-       { des => 'Hardware Information',
-	 cmd => 'harddrake'},
-       { des => 'Internet & Network',
-	 cmd => 'draknet'},
-       { des => 'Printer Configuration',
-	 cmd => 'printerdrake'},
-       { des => 'Add new users',
-	 cmd => 'adduserdrake'},
-       { des => 'Service Configuration',
-	 cmd => 'drakxservices'},
-       { des => 'Security Levels',
-	 cmd => 'draksec'},
-       { des => 'Boot Configuration',
-	 cmd => 'drakboot'},
-       { des => 'Auto Install',
-	 cmd => 'drakautoinst'},
-       { des => 'Connection Sharing',
-	 cmd => 'drakgw'},
-       { des => 'Diskdrake',
-	 cmd => 'diskdrake'},
-      );
-my $choice = $in->ask_from_listf(_("Control Center"),
-			    _("Choose the tool you want to use"),
-			    sub { (int grep { -x "$_/" . $_[0]{cmd} } split (":", $ENV{PATH})) ? $_[0]{des} : ()  },#grep { my $prog = $_; int grep { -x "$_/$prog" } split ":", $ENV{PATH} } $_[0]{des} },
-			    \@l ) or $in->exit(1);
-$in->end;
-
-exec $choice->{cmd}, @ARGV or $in->exit(1);
diff --git a/perl-install/standalone/drakxservices b/perl-install/standalone/drakxservices
deleted file mode 100755
index 21e7baade..000000000
--- a/perl-install/standalone/drakxservices
+++ /dev/null
@@ -1,24 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-
-use common;
-use interactive;
-use standalone;
-use services;
-use log;
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: drakxservices\n";
-
-
-my $in = 'interactive'->vnew('su', 'services');
-begin:
-my $l = services::ask($in);
-services::doit($in, $l) if $l;
-!$::isEmbedded and $in->exit(0);
-kill USR1, $::CCPID;
-goto begin;
diff --git a/perl-install/standalone/icons/fileopen.xpm b/perl-install/standalone/icons/fileopen.xpm
deleted file mode 100644
index 74049e224..000000000
--- a/perl-install/standalone/icons/fileopen.xpm
+++ /dev/null
@@ -1,34 +0,0 @@
-/* XPM */
-/* Drawn  by Mark Donohoe for the K Desktop Environment */
-/* See http://www.kde.org */
-static char*fileopen[]={
-"22 22 6 1",
-"# c #000000",
-"d c #808080",
-"c c #c0c0c0",
-"b c #ffffff",
-"a c #dcdcdc",
-". c None",
-"......................",
-"......................",
-"............####......",
-"...............##.#...",
-"................###...",
-"................###...",
-"...............####...",
-"....####..............",
-"....#aba#######.......",
-"....#babababab#.......",
-"....#aa##########.....",
-"....#ba#aacccccd#.....",
-"....#a#aacacccd#......",
-"....#a#aacccdcd#......",
-"....##aacacccd#.......",
-"....##aacccdcd#.......",
-"....#dddddddd#........",
-"....##########........",
-"......................",
-"......................",
-"......................",
-"......................"};
-
diff --git a/perl-install/standalone/icons/find.xpm b/perl-install/standalone/icons/find.xpm
deleted file mode 100644
index 3145ca7fe..000000000
--- a/perl-install/standalone/icons/find.xpm
+++ /dev/null
@@ -1,34 +0,0 @@
-/* XPM */
-/* Drawn  by Mark Donohoe for the K Desktop Environment */
-/* See http://www.kde.org */
-static char*find[]={
-"22 22 6 1",
-"# c #000000",
-"c c #ffffff",
-"b c #dcdcdc",
-"a c #a0a0a4",
-"d c #dcdcdc",
-". c None",
-"......................",
-"......................",
-"......................",
-".......####...........",
-".....a#bccd#a.........",
-".....#ccaacc#a........",
-"....#dcaccccd#........",
-"....#cccccccc#........",
-"....#cccccccc#........",
-"....#dccccccd#........",
-"....a#cccccc#a........",
-".....a#dccd###........",
-"......a####a###.......",
-".......aaaaaa###......",
-"............aa###.....",
-".............aa###....",
-"..............aa###...",
-"...............aa#a...",
-"................aa....",
-"......................",
-"......................",
-"......................"};
-
diff --git a/perl-install/standalone/icons/findf.xpm b/perl-install/standalone/icons/findf.xpm
deleted file mode 100644
index 792007335..000000000
--- a/perl-install/standalone/icons/findf.xpm
+++ /dev/null
@@ -1,31 +0,0 @@
-/* XPM */
-static char * findf_xpm[] = {
-"16 22 6 1",
-" 	c None",
-".	c #000000",
-"+	c #FFFFFF",
-"@	c #0000FF",
-"#	c #BEBEFF",
-"$	c #C0C0C0",
-"                ",
-"                ",
-"                ",
-" ...........    ",
-".+++++++++++.   ",
-".++++++++@#+.   ",
-".+++++++++@+.   ",
-".++++$...$++.   ",
-".+++$.+++.$+.   ",
-".+++.+#+#+.+.   ",
-".+++.+@@++.+.   ",
-".+++.++@#+.+.   ",
-".+++$.+++..+.   ",
-".@#++$....+..   ",
-".+@+++++++.+.   ",
-".++++++++++.+.  ",
-".++@#+++++++.+. ",
-" ........... .+.",
-"              . ",
-"                ",
-"                ",
-"                "};
diff --git a/perl-install/standalone/icons/ftin.xpm b/perl-install/standalone/icons/ftin.xpm
deleted file mode 100644
index d0326d3ce..000000000
--- a/perl-install/standalone/icons/ftin.xpm
+++ /dev/null
@@ -1,30 +0,0 @@
-/* XPM */
-static char * ftin_xpm[] = {
-"15 22 5 1",
-" 	c None",
-".	c #CD0000",
-"+	c #FFFFFF",
-"@	c #C0C0C0",
-"#	c #808080",
-"               ",
-"               ",
-"               ",
-"               ",
-"               ",
-"    . .        ",
-"    ...        ",
-"    ...++++++++",
-"    ...@@@@@@++",
-"  .......+++++#",
-"   .....@@@++#+",
-"  ++...+++++#+#",
-" +@@@.@@@++#+#+",
-"++++++++++#+#+ ",
-"##########+#+  ",
-"++++++++++#+   ",
-"##########+    ",
-"++++++++++     ",
-"               ",
-"               ",
-"               ",
-"               "};
diff --git a/perl-install/standalone/icons/ftout.xpm b/perl-install/standalone/icons/ftout.xpm
deleted file mode 100644
index b4e0135b8..000000000
--- a/perl-install/standalone/icons/ftout.xpm
+++ /dev/null
@@ -1,30 +0,0 @@
-/* XPM */
-static char * ftout_xpm[] = {
-"15 22 5 1",
-" 	c None",
-".	c #00008B",
-"+	c #FFFFFF",
-"@	c #C0C0C0",
-"#	c #808080",
-"               ",
-"               ",
-"               ",
-"               ",
-"               ",
-"     .         ",
-"    ...        ",
-"   .....+++++++",
-"  .......@@@@++",
-"    ...+++++++#",
-"   +...@@@@++#+",
-"  ++...+++++#+#",
-" +@@.+.@@++#+#+",
-"++++++++++#+#+ ",
-"##########+#+  ",
-"++++++++++#+   ",
-"##########+    ",
-"++++++++++     ",
-"               ",
-"               ",
-"               ",
-"               "};
diff --git a/perl-install/standalone/icons/reload.xpm b/perl-install/standalone/icons/reload.xpm
deleted file mode 100644
index 658cf36f0..000000000
--- a/perl-install/standalone/icons/reload.xpm
+++ /dev/null
@@ -1,31 +0,0 @@
-/* XPM */
-/* Drawn  by Mark Donohoe for the K Desktop Environment */
-/* See http://www.kde.org */
-static char*reload[]={
-"22 22 3 1",
-"# c #808080",
-"a c #000000",
-". c None",
-"......................",
-"......................",
-"......................",
-"......................",
-"........##aaa#........",
-".......#aaaaaaa.......",
-"......#aa#....#a......",
-"......aa#.............",
-".....aaa.......a......",
-"...aaaaaaa....aaa.....",
-"....aaaaa....aaaaa....",
-".....aaa....aaaaaaa...",
-"......a.......aaa.....",
-".............#aa......",
-"......a#....#aa#......",
-".......aaaaaaa#.......",
-"........#aaa##........",
-"......................",
-"......................",
-"......................",
-"......................",
-"......................"};
-
diff --git a/perl-install/standalone/interactive_http/Makefile b/perl-install/standalone/interactive_http/Makefile
deleted file mode 100644
index 5607112c9..000000000
--- a/perl-install/standalone/interactive_http/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-NAME=libDrakX
-FNAME=$(NAME)/drakxtools_http
-PREFIX=
-DATADIR=$(PREFIX)/usr/share
-
-all: index.html
-
-index.html: index.html.pl
-	perl $^ > $@
-
-install:	
-	install -D miniserv.init $(PREFIX)/etc/init.d/drakxtools_http
-	install -D -m 644 authorised_progs $(PREFIX)/etc/drakxtools_http/authorised_progs
-	install -D -m 644 miniserv.conf $(PREFIX)/etc/drakxtools_http/conf
-	install -D -m 644 miniserv.pam $(PREFIX)/etc/pam.d/miniserv
-	install -D -m 644 miniserv.logrotate $(PREFIX)/etc/logrotate.d/drakxtools-http
-
-	install -d $(DATADIR)/$(FNAME)/www
-	install -m 644 miniserv.pl miniserv.pem miniserv.users $(DATADIR)/$(FNAME)
-	install -m 644 index.html $(DATADIR)/$(FNAME)/www
-	install interactive_http.cgi $(DATADIR)/$(FNAME)/www
diff --git a/perl-install/standalone/interactive_http/authorised_progs b/perl-install/standalone/interactive_http/authorised_progs
deleted file mode 100644
index d113e1297..000000000
--- a/perl-install/standalone/interactive_http/authorised_progs
+++ /dev/null
@@ -1,13 +0,0 @@
-/usr/sbin/XFdrake
-/usr/sbin/adduserdrake
-/usr/sbin/diskdrake
-/usr/sbin/drakautoinst
-/usr/sbin/drakboot
-/usr/sbin/drakgw
-/usr/sbin/draknet
-/usr/sbin/draksec
-/usr/sbin/drakxservices
-/usr/sbin/keyboarddrake
-/usr/sbin/mousedrake
-/usr/sbin/printerdrake
-/usr/sbin/tinyfirewall
diff --git a/perl-install/standalone/interactive_http/index.html.pl b/perl-install/standalone/interactive_http/index.html.pl
deleted file mode 100644
index afd91459b..000000000
--- a/perl-install/standalone/interactive_http/index.html.pl
+++ /dev/null
@@ -1,14 +0,0 @@
-use MDK::Common;
-
-print '<html>
-';
-foreach (map { chomp_($_) } cat_('authorised_progs')) {
-    my $name = basename($_);
-    print 
-qq(<a href="/interactive_http.cgi?state=new&prog=$_">$name</a>
-<br>
-);
-}
-print '
-</html>
-';
diff --git a/perl-install/standalone/interactive_http/interactive_http.cgi b/perl-install/standalone/interactive_http/interactive_http.cgi
deleted file mode 100755
index 935a4a765..000000000
--- a/perl-install/standalone/interactive_http/interactive_http.cgi
+++ /dev/null
@@ -1,95 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-use CGI;
-use common;
-use c;
-
-my $q = CGI->new;
-$| = 1;
-
-my $script_name = $q->url(-relative => 1);
-
-# name inversed (must be in sync with interactive_http.html)
-my $pipe_r = "/tmp/interactive_http_w";
-my $pipe_w = "/tmp/interactive_http_r";
-
-if ($q->param('state') eq 'new') {
-    force_exit_dead_prog();
-    mkfifo($pipe_r); mkfifo($pipe_w);
-
-    spawn_server($q->param('prog'));
-    first_step();
-
-} elsif ($q->param('state') eq 'next_step') {
-    next_step();
-} else {
-    error("booh...");
-}
-
-sub read_ {
-    local *F;
-    open F, "<$pipe_r" or error("Failed to connect to the prog");
-    my $t;
-    print $t while sysread F, $t, 1;
-}
-sub write_ {
-    local *F;
-    open F, ">$pipe_w" or die;
-    my $q = CGI->new;
-    $q->save(\*F);
-}
-
-sub first_step { read_() }
-sub next_step { write_(); read_() }
-
-
-sub force_exit_dead_prog {
-    -p $pipe_w or return;
-    {
-	local *F;
-	sysopen F, $pipe_w, 1 | c::O_NONBLOCK() or return;
-	syswrite F, "force_exit_dead_prog=1\n";
-    }
-
-    my $cnt = 10;
-    while (-p $pipe_w) {
-	sleep 1;
-	$cnt-- or error("Dead prog failed to exit");
-    }
-}
-
-sub spawn_server {
-    my ($prog) = @_;
-
-    my @authorised_progs = map { chomp_($_) } cat_('/etc/drakxtools_http/authorised_progs');
-    member($prog, @authorised_progs) or error("You tried to call a non-authorised program");
-
-    fork and return;
-
-    $ENV{INTERACTIVE_HTTP} = $script_name;
-
-    open STDIN, "</dev/zero";
-    open STDOUT, ">/dev/null"; #tmp/log";
-    open STDERR, ">&STDOUT";
-
-    c::setsid();
-    exec $prog or die "prog $prog not found\n";
-}
-
-sub error {
-    my $msg = join '', @_;
-
-    print $q->header(), $q->start_html();
-    print $q->h1(_("Error")), @_;
-    print $q->end_html(), "\n";
-    exit 0;
-}
-
-sub mkfifo {
-    my ($f) = @_;
-    -p $f and return;
-    unlink $f;
-    syscall_('mknod', $f, c::S_IFIFO() | 0600, 0) or die "mkfifo failed";
-    chmod 0666, $f;
-}
diff --git a/perl-install/standalone/interactive_http/miniserv.conf b/perl-install/standalone/interactive_http/miniserv.conf
deleted file mode 100644
index 99f6a5172..000000000
--- a/perl-install/standalone/interactive_http/miniserv.conf
+++ /dev/null
@@ -1,13 +0,0 @@
-ssl=1
-log=1
-port=10001
-listen=10001
-forkcgis=1
-realm=Drakxtools Server
-
-addtype_cgi=internal/cgi
-logfile=/var/log/drakxtools_http.log
-pidfile=/var/run/drakxtools_http.pid
-root=/usr/share/libDrakX/drakxtools_http/www
-keyfile=/usr/share/libDrakX/drakxtools_http/miniserv.pem
-userfile=/usr/share/libDrakX/drakxtools_http/miniserv.users
diff --git a/perl-install/standalone/interactive_http/miniserv.init b/perl-install/standalone/interactive_http/miniserv.init
deleted file mode 100644
index e7673083c..000000000
--- a/perl-install/standalone/interactive_http/miniserv.init
+++ /dev/null
@@ -1,51 +0,0 @@
-#!/bin/sh
-# chkconfig: 235 99 00
-# description: Start or stop the miniserv administration server
-
-name=drakxtools_http
-server=/usr/share/libDrakX/$name/miniserv.pl
-
-case "$1" in
-'start')
-	echo -n "Starting $name: "
-	perl $server /etc/$name/conf
-	touch /var/lock/subsys/drakxtools_http
-	echo $name
-	;;
-'stop')
-	echo -n "Shutting down $name: "
-	kill `cat /var/run/$name.pid`
-	rm -f /var/lock/subsys/drakxtools_http
-	echo $name
-	;;
-'status')
-	if [ -s /var/run/$name.pid ]; then
-	    pid=`cat /var/run/$name.pid`
-		kill -0 $pid >/dev/null 2>&1
-		if [ "$?" = "0" ]; then
-			echo "$name (pid $pid) is running"
-		else
-			echo "$name is stopped"
-		fi
-	else
-		echo "$name is stopped"
-	fi
-	;;
-'restart')
-	$0 stop
-	$0 start
-	;;
-'reload')
-        $0 stop
-        $0 start
-        ;;
-'condrestart')
-	if [ -f /var/lock/subsys/drakxtools_http ]; then
-            $0 restart
-        fi
-        ;;
-*)
-	echo "Usage: $0 {start|stop|restart|status|reload|condrestart}"
-	;;
-esac
-exit 0
diff --git a/perl-install/standalone/interactive_http/miniserv.logrotate b/perl-install/standalone/interactive_http/miniserv.logrotate
deleted file mode 100644
index b1e833f9b..000000000
--- a/perl-install/standalone/interactive_http/miniserv.logrotate
+++ /dev/null
@@ -1,7 +0,0 @@
-# Logrotate file for drakxtools-http RPM
-
-/var/log/drakxtools_http.log {
-    weekly
-    notifempty
-    missingok
-}
diff --git a/perl-install/standalone/interactive_http/miniserv.pam b/perl-install/standalone/interactive_http/miniserv.pam
deleted file mode 100644
index 37eae44e0..000000000
--- a/perl-install/standalone/interactive_http/miniserv.pam
+++ /dev/null
@@ -1,5 +0,0 @@
-#%PAM-1.0
-auth       required	/lib/security/pam_stack.so service=system-auth
-account    required	/lib/security/pam_stack.so service=system-auth
-password   required	/lib/security/pam_stack.so service=system-auth
-session    required	/lib/security/pam_stack.so service=system-auth
diff --git a/perl-install/standalone/interactive_http/miniserv.pem b/perl-install/standalone/interactive_http/miniserv.pem
deleted file mode 100644
index e11919e37..000000000
--- a/perl-install/standalone/interactive_http/miniserv.pem
+++ /dev/null
@@ -1,18 +0,0 @@
------BEGIN RSA PRIVATE KEY-----
-MIIBOgIBAAJBANaRBV7X6DWUbTm8KBjjHx4CAHVSQCmei8QIwruVPngwOkEhsgzf
-IT1IY6jyY3QM6a4ASl7xokoy5U4QZ8E/q40CAwEAAQJBAIwMLA0zr4UJVCGTBjj4
-RZ84f0QUY3zG10Mk1LXLO/MFlRol+640x/PB76fPKP+Gx+88s8F6lcx7uV+jB0bM
-F6ECIQD3aYxjgxLinAmTjZf5gJDm/5LeEogML7nJ+aXJs8oAFwIhAN4DnKUfjiim
-pOowhaRqy8b9fjXG8L+SG/+KcZDsWzP7AiBO2gXTRVgEfwSSUUNJUo9b/8I4IqHX
-eHJ3C6ip8zIC+wIgdhsVygHvblC4ip0le0IVBdb0vUcH6+GeY2MS5zXVjuECIEP0
-GLnMXcQ02f8rQz0eeBYVHTNXKRMesgo3ZNcpDB2k
------END RSA PRIVATE KEY-----
------BEGIN CERTIFICATE-----
-MIIBNTCB4AIBADANBgkqhkiG9w0BAQQFADAmMRgwFgYDVQQKEw9XZWJtaW4gU29m
-dHdhcmUxCjAIBgNVBAMUASowHhcNOTgwMTAzMTAzNDUwWhcNMDcxMDAzMTAzNDUw
-WjAmMRgwFgYDVQQKEw9XZWJtaW4gU29mdHdhcmUxCjAIBgNVBAMUASowXDANBgkq
-hkiG9w0BAQEFAANLADBIAkEA1pEFXtfoNZRtObwoGOMfHgIAdVJAKZ6LxAjCu5U+
-eDA6QSGyDN8hPUhjqPJjdAzprgBKXvGiSjLlThBnwT+rjQIDAQABMA0GCSqGSIb3
-DQEBBAUAA0EAFCoYeLlWcClpv2sSc7zIchsMR3DKeH/O1ZtfEezzkaonre78HeYV
-wSQvuoVleb7A497TFcSB6+FON6azoVqPyQ==
------END CERTIFICATE-----
diff --git a/perl-install/standalone/interactive_http/miniserv.pl b/perl-install/standalone/interactive_http/miniserv.pl
deleted file mode 100644
index b11ce26e2..000000000
--- a/perl-install/standalone/interactive_http/miniserv.pl
+++ /dev/null
@@ -1,1817 +0,0 @@
-#!/usr/bin/perl
-# A very simple perl web server used by Webmin
-
-# Require basic libraries
-package miniserv;
-use Socket;
-use POSIX;
-use Sys::Hostname;
-
-# Find and read config file
-if (@ARGV != 1) {
-	die "Usage: miniserv.pl <config file>";
-	}
-if ($ARGV[0] =~ /^\//) {
-	$conf = $ARGV[0];
-	}
-else {
-	chop($pwd = `pwd`);
-	$conf = "$pwd/$ARGV[0]";
-	}
-open(CONF, $conf) || die "Failed to open config file $conf : $!";
-while(<CONF>) {
-	s/\r|\n//g;
-	if (/^#/ || !/\S/) { next; }
-	/^([^=]+)=(.*)$/;
-	$name = $1; $val = $2;
-	$name =~ s/^\s+//g; $name =~ s/\s+$//g;
-	$val =~ s/^\s+//g; $val =~ s/\s+$//g;
-	$config{$name} = $val;
-	}
-close(CONF);
-
-# Check is SSL is enabled and available
-if ($config{'ssl'}) {
-	eval "use Net::SSLeay";
-	if (!$@) {
-		$use_ssl = 1;
-		# These functions only exist for SSLeay 1.0
-		eval "Net::SSLeay::SSLeay_add_ssl_algorithms()";
-		eval "Net::SSLeay::load_error_strings()";
-		if (defined(&Net::SSLeay::X509_STORE_CTX_get_current_cert) &&
-		    defined(&Net::SSLeay::CTX_load_verify_locations) &&
-		    defined(&Net::SSLeay::CTX_set_verify)) {
-			$client_certs = 1;
-			}
-		}
-	}
-
-# Check if the syslog module is available to log hacking attempts
-if ($config{'syslog'}) {
-	eval "use Sys::Syslog qw(:DEFAULT setlogsock)";
-	if (!$@) {
-		$use_syslog = 1;
-		}
-	}
-
-# check if the PAM module is available to authenticate
-eval "use Authen::PAM";
-if (!$@) {
-	# check if the PAM authentication can be used by opening a handle
-	if (! ref($pamh = new Authen::PAM("miniserv", "root", \&pam_conv_func))) {
-		print STDERR "PAM module available, but error during init !\n";
-		print STDERR "Disabling PAM functions.\n";
-		}
-	else {
-		$use_pam = 1;
-		}
-	}
-
-# check if the TCP-wrappers module is available
-if ($config{'libwrap'}) {
-	eval "use Authen::Libwrap qw(hosts_ctl STRING_UNKNOWN)";
-	if (!$@) {
-		$use_libwrap = 1;
-		}
-	}
-
-# Get miniserv's perl path and location
-$miniserv_path = $0;
-open(SOURCE, $miniserv_path);
-<SOURCE> =~ /^#!(\S+)/; $perl_path = $1;
-close(SOURCE);
-@miniserv_argv = @ARGV;
-
-# Check vital config options
-%vital = ("port", 80,
-	  "root", "./",
-	  "server", "MiniServ/0.01",
-	  "index_docs", "index.html index.htm index.cgi",
-	  "addtype_html", "text/html",
-	  "addtype_txt", "text/plain",
-	  "addtype_gif", "image/gif",
-	  "addtype_jpg", "image/jpeg",
-	  "addtype_jpeg", "image/jpeg",
-	  "realm", "MiniServ",
-	  "session_login", "/session_login.cgi"
-	 );
-foreach $v (keys %vital) {
-	if (!$config{$v}) {
-		if ($vital{$v} eq "") {
-			die "Missing config option $v";
-			}
-		$config{$v} = $vital{$v};
-		}
-	}
-if (!$config{'sessiondb'}) {
-	$config{'pidfile'} =~ /^(.*)\/[^\/]+$/;
-	$config{'sessiondb'} = "$1/sessiondb";
-	}
-die "Session authentication cannot be used in inetd mode"
-	if ($config{'inetd'} && $config{'session'});
-
-# init days and months for http_date
-@weekday = ( "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat" );
-@month = ( "Jan", "Feb", "Mar", "Apr", "May", "Jun",
-	   "Jul", "Aug", "Sep", "Oct", "Nov", "Dec" );
-
-# Change dir to the server root
-chdir($config{'root'});
-$user_homedir = (getpwuid($<))[7];
-
-# Read users file
-if ($config{'userfile'}) {
-	open(USERS, $config{'userfile'});
-	while(<USERS>) {
-		s/\r|\n//g;
-		local @user = split(/:/, $_);
-		$users{$user[0]} = $user[1];
-		$certs{$user[0]} = $user[3] if ($user[3]);
-		if ($user[4] =~ /^allow\s+(.*)/) {
-			$allow{$user[0]} = [ &to_ipaddress(split(/\s+/, $1)) ];
-			}
-		elsif ($user[4] =~ /^deny\s+(.*)/) {
-			$deny{$user[0]} = [ &to_ipaddress(split(/\s+/, $1)) ];
-			}
-		}
-	close(USERS);
-	}
-
-# Setup SSL if possible and if requested
-if ($use_ssl) {
-	$ssl_ctx = Net::SSLeay::CTX_new() ||
-		die "Failed to create SSL context : $!";
-	$client_certs = 0 if (!$config{'ca'} || !%certs);
-	if ($client_certs) {
-		Net::SSLeay::CTX_load_verify_locations(
-			$ssl_ctx, $config{'ca'}, "");
-		Net::SSLeay::CTX_set_verify(
-			$ssl_ctx, &Net::SSLeay::VERIFY_PEER, \&verify_client);
-		}
-
-	Net::SSLeay::CTX_use_RSAPrivateKey_file(
-		$ssl_ctx, $config{'keyfile'},
-		&Net::SSLeay::FILETYPE_PEM) || die "Failed to open SSL key";
-	Net::SSLeay::CTX_use_certificate_file(
-		$ssl_ctx, $config{'keyfile'},
-		&Net::SSLeay::FILETYPE_PEM);
-	}
-
-# Setup syslog support if possible and if requested
-if ($use_syslog) {
-	eval { openlog("miniserv", "cons,pid,ndelay", "daemon") };
-	$use_syslog = 0 if ($@);
-	}
-
-# Read MIME types file and add extra types
-if ($config{"mimetypes"} ne "") {
-	open(MIME, $config{"mimetypes"});
-	while(<MIME>) {
-		chop; s/#.*$//;
-		if (/^(\S+)\s+(.*)$/) {
-			$type = $1; @exts = split(/\s+/, $2);
-			foreach $ext (@exts) {
-				$mime{$ext} = $type;
-				}
-			}
-		}
-	close(MIME);
-	}
-foreach $k (keys %config) {
-	if ($k !~ /^addtype_(.*)$/) { next; }
-	$mime{$1} = $config{$k};
-	}
-	
-# get the time zone
-if ($config{'log'}) {
-	local(@gmt, @lct, $days, $hours, $mins);
-	@make_date_marr = ("Jan", "Feb", "Mar", "Apr", "May", "Jun",
-		 	   "Jul", "Aug", "Sep", "Oct", "Nov", "Dec");
-	@gmt = gmtime(time());
-	@lct = localtime(time());
-	$days = $lct[3] - $gmt[3];
-	$hours = ($days < -1 ? 24 : 1 < $days ? -24 : $days * 24) +
-		 $lct[2] - $gmt[2];
-	$mins = $hours * 60 + $lct[1] - $gmt[1];
-	$timezone = ($mins < 0 ? "-" : "+"); $mins = abs($mins);
-	$timezone .= sprintf "%2.2d%2.2d", $mins/60, $mins%60;
-	}
-
-if ($config{'inetd'}) {
-	# We are being run from inetd - go direct to handling the request
-	$SIG{'HUP'} = 'IGNORE';
-	$SIG{'TERM'} = 'DEFAULT';
-	$SIG{'PIPE'} = 'DEFAULT';
-	open(SOCK, "+>&STDIN");
-
-	# Check if it is time for the logfile to be cleared
-	if ($config{'logclear'}) {
-		local $write_logtime = 0;
-		local @st = stat("$config{'logfile'}.time");
-		if (@st) {
-			if ($st[9]+$config{'logtime'}*60*60 < time()){
-				# need to clear log
-				$write_logtime = 1;
-				unlink($config{'logfile'});
-				}
-			}
-		else { $write_logtime = 1; }
-		if ($write_logtime) {
-			open(LOGTIME, ">$config{'logfile'}.time");
-			print LOGTIME time(),"\n";
-			close(LOGTIME);
-			}
-		}
-
-	# Initialize SSL for this connection
-	if ($use_ssl) {
-		$ssl_con = Net::SSLeay::new($ssl_ctx);
-		Net::SSLeay::set_fd($ssl_con, fileno(SOCK));
-		#Net::SSLeay::use_RSAPrivateKey_file(
-		#	$ssl_con, $config{'keyfile'},
-		#	&Net::SSLeay::FILETYPE_PEM);
-		#Net::SSLeay::use_certificate_file(
-		#	$ssl_con, $config{'keyfile'},
-		#	&Net::SSLeay::FILETYPE_PEM);
-		Net::SSLeay::accept($ssl_con) || exit;
-		}
-
-	# Work out the hostname for this web server
-	if (!$config{'host'}) {
-		($myport, $myaddr) =
-			unpack_sockaddr_in(getsockname(SOCK));
-		$myname = gethostbyaddr($myaddr, AF_INET);
-		if ($myname eq "") {
-			$myname = inet_ntoa($myaddr);
-			}
-		$host = $myname;
-		}
-	else { $host = $config{'host'}; }
-	$port = $config{'port'};
-
-	while(&handle_request(getpeername(SOCK), getsockname(SOCK))) { }
-	close(SOCK);
-	exit;
-	}
-
-# Open main socket
-$proto = getprotobyname('tcp');
-socket(MAIN, PF_INET, SOCK_STREAM, $proto) ||
-	die "Failed to open main socket : $!";
-setsockopt(MAIN, SOL_SOCKET, SO_REUSEADDR, pack("l", 1));
-$baddr = $config{"bind"} ? inet_aton($config{"bind"}) : INADDR_ANY;
-for($i=0; $i<5; $i++) {
-	last if (bind(MAIN, sockaddr_in($config{port}, $baddr)));
-	sleep(1);
-	}
-die "Failed to bind port $config{port} : $!" if ($i == 5);
-listen(MAIN, SOMAXCONN);
-
-if ($config{'listen'}) {
-	# Open the socket that allows other miniserv servers to find this one
-	$proto = getprotobyname('udp');
-	if (socket(LISTEN, PF_INET, SOCK_DGRAM, $proto)) {
-		setsockopt(LISTEN, SOL_SOCKET, SO_REUSEADDR, pack("l", 1));
-		bind(LISTEN, sockaddr_in($config{'listen'}, INADDR_ANY));
-		listen(LISTEN, SOMAXCONN);
-		}
-	else {
-		print STDERR "Failed to open listening socket : $!\n";
-		$config{'listen'} = 0;
-		}
-	}
-
-
-# Split from the controlling terminal
-if (fork()) { exit; }
-setsid();
-
-# write out the PID file
-open(PIDFILE, "> $config{'pidfile'}");
-printf PIDFILE "%d\n", getpid();
-close(PIDFILE);
-
-# Start the log-clearing process, if needed. This checks every minute
-# to see if the log has passed its reset time, and if so clears it
-if ($config{'logclear'}) {
-	if (!($logclearer = fork())) {
-		while(1) {
-			local $write_logtime = 0;
-			local @st = stat("$config{'logfile'}.time");
-			if (@st) {
-				if ($st[9]+$config{'logtime'}*60*60 < time()){
-					# need to clear log
-					$write_logtime = 1;
-					unlink($config{'logfile'});
-					}
-				}
-			else { $write_logtime = 1; }
-			if ($write_logtime) {
-				open(LOGTIME, ">$config{'logfile'}.time");
-				print LOGTIME time(),"\n";
-				close(LOGTIME);
-				}
-			sleep(5*60);
-			}
-		exit;
-		}
-	push(@childpids, $logclearer);
-	}
-
-# Setup the logout time dbm if needed
-if ($config{'session'}) {
-	eval "use SDBM_File";
-	dbmopen(%sessiondb, $config{'sessiondb'}, 0700);
-	eval { $sessiondb{'1111111111'} = 'foo bar' };
-	if ($@) {
-		dbmclose(%sessiondb);
-		eval "use NDBM_File";
-		dbmopen(%sessiondb, $config{'sessiondb'}, 0700);
-		}
-	}
-
-# Run the main loop
-$SIG{'HUP'} = 'miniserv::trigger_restart';
-$SIG{'TERM'} = 'miniserv::term_handler';
-$SIG{'PIPE'} = 'IGNORE';
-@deny = &to_ipaddress(split(/\s+/, $config{"deny"}));
-@allow = &to_ipaddress(split(/\s+/, $config{"allow"}));
-$p = 0;
-while(1) {
-	# wait for a new connection, or a message from a child process
-	undef($rmask);
-	vec($rmask, fileno(MAIN), 1) = 1;
-	if ($config{'passdelay'} || $config{'session'}) {
-		for($i=0; $i<@passin; $i++) {
-			vec($rmask, fileno($passin[$i]), 1) = 1;
-			}
-		}
-	vec($rmask, fileno(LISTEN), 1) = 1 if ($config{'listen'});
-
-	local $sel = select($rmask, undef, undef, 10);
-	if ($need_restart) { &restart_miniserv(); }
-	local $time_now = time();
-
-	# Clean up finished processes
-	local($pid);
-	do {	$pid = waitpid(-1, WNOHANG);
-		@childpids = grep { $_ != $pid } @childpids;
-		} while($pid > 0);
-
-	# run the unblocking procedure to check if enough time has passed to
-	# unblock hosts that heve been blocked because of password failures
-	if ($config{'blockhost_failures'}) {
-		$i = 0;
-		while ($i <= $#deny) {
-			if ($blockhosttime{$deny[$i]} && $config{'blockhost_time'} != 0 &&
-			    ($time_now - $blockhosttime{$deny[$i]}) >= $config{'blockhost_time'}) {
-				# the host can be unblocked now
-				$hostfail{$deny[$i]} = 0;
-				splice(@deny, $i, 1);
-				}
-			$i++;
-			}
-		}
-
-	if ($config{'session'}) {
-		# Remove sessions with more than 7 days of inactivity
-		foreach $s (keys %sessiondb) {
-			local ($user, $ltime) = split(/\s+/, $sessiondb{$s});
-			if ($time_now - $ltime > 7*24*60*60) {
-				delete($sessiondb{$s});
-				}
-			}
-		}
-	next if ($sel <= 0);
-	if (vec($rmask, fileno(MAIN), 1)) {
-		# got new connection
-		$acptaddr = accept(SOCK, MAIN);
-		if (!$acptaddr) { next; }
-
-		# create pipes
-		if ($config{'passdelay'} || $config{'session'}) {
-			$PASSINr = "PASSINr$p"; $PASSINw = "PASSINw$p";
-			$PASSOUTr = "PASSOUTr$p"; $PASSOUTw = "PASSOUTw$p";
-			$p++;
-			pipe($PASSINr, $PASSINw);
-			pipe($PASSOUTr, $PASSOUTw);
-			select($PASSINw); $| = 1; select($PASSINr); $| = 1;
-			select($PASSOUTw); $| = 1; select($PASSOUTw); $| = 1;
-			}
-		select(STDOUT);
-
-		# Check username of connecting user
-		local ($peerp, $peera) = unpack_sockaddr_in($acptaddr);
-		$localauth_user = undef;
-		if ($config{'localauth'} && inet_ntoa($peera) eq "127.0.0.1") {
-			if (open(TCP, "/proc/net/tcp")) {
-				# Get the info direct from the kernel
-				while(<TCP>) {
-					s/^\s+//;
-					local @t = split(/[\s:]+/, $_);
-					if ($t[1] eq '0100007F' &&
-					    $t[2] eq sprintf("%4.4X", $peerp)) {
-						$localauth_user = getpwuid($t[11]);
-						last;
-						}
-					}
-				close(TCP);
-				}
-			else {
-				# Call lsof for the info
-				local $lsofpid = open(LSOF,
-					"$config{'localauth'} -i TCP\@127.0.0.1:$peerp |");
-				while(<LSOF>) {
-					if (/^(\S+)\s+(\d+)\s+(\S+)/ &&
-					    $2 != $$ && $2 != $lsofpid) {
-						$localauth_user = $3;
-						}
-					}
-				close(LSOF);
-				}
-			}
-
-		# fork the subprocess
-		if (!($handpid = fork())) {
-			# setup signal handlers
-			$SIG{'TERM'} = 'DEFAULT';
-			$SIG{'PIPE'} = 'DEFAULT';
-			#$SIG{'CHLD'} = 'IGNORE';
-			$SIG{'HUP'} = 'IGNORE';
-
-			# Initialize SSL for this connection
-			if ($use_ssl) {
-				$ssl_con = Net::SSLeay::new($ssl_ctx);
-				Net::SSLeay::set_fd($ssl_con, fileno(SOCK));
-				#Net::SSLeay::use_RSAPrivateKey_file(
-				#	$ssl_con, $config{'keyfile'},
-				#	&Net::SSLeay::FILETYPE_PEM);
-				#Net::SSLeay::use_certificate_file(
-				#	$ssl_con, $config{'keyfile'},
-				#	&Net::SSLeay::FILETYPE_PEM);
-				Net::SSLeay::accept($ssl_con) || exit;
-				}
-
-			# close useless pipes
-			if ($config{'passdelay'} || $config{'session'}) {
-				foreach $p (@passin) { close($p); }
-				foreach $p (@passout) { close($p); }
-				close($PASSINr); close($PASSOUTw);
-				}
-			close(MAIN);
-
-			# Work out the hostname for this web server
-			if (!$config{'host'}) {
-				($myport, $myaddr) =
-					unpack_sockaddr_in(getsockname(SOCK));
-				$myname = gethostbyaddr($myaddr, AF_INET);
-				if ($myname eq "") {
-					$myname = inet_ntoa($myaddr);
-					}
-				$host = $myname;
-				}
-			else { $host = $config{'host'}; }
-			$port = $config{'port'};
-
-			local $switched = 0;
-			if ($config{'remoteuser'} && $localauth_user && !$<) {
-				# Switch to the UID of the remote user
-				local @u = getpwnam($localauth_user);
-				if (@u) {
-					$( = $u[3]; $) = "$u[3] $u[3]";
-					$< = $> = $u[2];
-					$switched = 1;
-					}
-				}
-			if ($config{'switchuser'} && !$< && !$switched) {
-				# Switch to the UID of server user
-				local @u = getpwnam($config{'switchuser'});
-				if (@u) {
-					$( = $u[3]; $) = "$u[3] $u[3]";
-					$< = $> = $u[2];
-					}
-				}
-
-			while(&handle_request($acptaddr, getsockname(SOCK))) { }
-			shutdown(SOCK, 1);
-			close(SOCK);
-			close($PASSINw); close($PASSOUTw);
-			exit;
-			}
-		push(@childpids, $handpid);
-		if ($config{'passdelay'} || $config{'session'}) {
-			close($PASSINw); close($PASSOUTr);
-			push(@passin, $PASSINr); push(@passout, $PASSOUTw);
-			}
-		close(SOCK);
-		}
-
-	if ($config{'listen'} && vec($rmask, fileno(LISTEN), 1)) {
-		# Got UDP packet from another miniserv server
-		local $rcvbuf;
-		local $from = recv(LISTEN, $rcvbuf, 1024, 0);
-		next if (!$from);
-		local $fromip = inet_ntoa((unpack_sockaddr_in($from))[1]);
-		local $toip = inet_ntoa((unpack_sockaddr_in(
-					 getsockname(LISTEN)))[1]);
-		if ((!@deny || !&ip_match($fromip, $toip, @deny)) &&
-		    (!@allow || &ip_match($fromip, $toip, @allow))) {
-			send(LISTEN, "$config{'host'}:$config{'port'}:".
-				     "$use_ssl", 0, $from);
-			}
-		}
-
-	# check for password-timeout messages from subprocesses
-	for($i=0; $i<@passin; $i++) {
-		if (vec($rmask, fileno($passin[$i]), 1)) {
-			# this sub-process is asking about a password
-			$infd = $passin[$i]; $outfd = $passout[$i];
-			$inline = <$infd>;
-			if ($inline =~ /^delay\s+(\S+)\s+(\S+)\s+(\d+)/) {
-				# Got a delay request from a subprocess.. for
-				# valid logins, there is no delay (to prevent
-				# denial of service attacks), but for invalid
-				# logins the delay increases with each failed
-				# attempt.
-				if ($3) {
-					# login OK.. no delay
-					print $outfd "0 0\n";
-					$hostfail{$2} = 0;
-					}
-				else {
-					# login failed..
-					$hostfail{$2}++;
-					# add the host to the block list if necessary
- 					if ($config{'blockhost_failures'} &&
-					    $hostfail{$2} >= $config{'blockhost_failures'}) {
-						push(@deny, $2);					
-						$blockhosttime{$2} = $time_now;
-						$blocked = 1;
-						if ($use_syslog) {
-							local $logtext = "Security alert: Host $2 ".
-							  "blocked after $config{'blockhost_failures'} ".
-							  "failed logins for user $1";
-							syslog("crit", $logtext);
-							}
-						}
-					else {
-						$blocked = 0;
-						}
-					$dl = $userdlay{$1} -
-					      int(($time_now - $userlast{$1})/50);
-					$dl = $dl < 0 ? 0 : $dl+1;
-					print $outfd "$dl $blocked\n";
-					$userdlay{$1} = $dl;
-					}
-				$userlast{$1} = $time_now;
-				}
-			elsif ($inline =~ /^verify\s+(\S+)/) {
-				# Verifying a session ID
-				local $session_id = $1;
-				if (!defined($sessiondb{$session_id})) {
-					print $outfd "0 0\n";
-					}
-				else {
-					local ($user, $ltime) = split(/\s+/, $sessiondb{$session_id});
-					if ($config{'logouttime'} &&
-					    $time_now - $ltime > $config{'logouttime'}*60) {
-						print $outfd "1 ",$time_now - $ltime,"\n";
-						delete($sessiondb{$session_id});
-						}
-					else {
-						print $outfd "2 $user\n";
-						$sessiondb{$session_id} = "$user $time_now";
-						}
-					}
-				}
-			elsif ($inline =~ /^new\s+(\S+)\s+(\S+)/) {
-				# Creating a new session
-				$sessiondb{$1} = "$2 $time_now";
-				}
-			elsif ($inline =~ /^delete\s+(\S+)/) {
-				# Logging out a session
-				print $outfd $sessiondb{$1} ? 1 : 0,"\n";
-				delete($sessiondb{$1});
-				}
-			else {
-				# close pipe
-				close($infd); close($outfd);
-				$passin[$i] = $passout[$i] = undef;
-				}
-			}
-		}
-	@passin = grep { defined($_) } @passin;
-	@passout = grep { defined($_) } @passout;
-	}
-
-# handle_request(remoteaddress, localaddress)
-# Where the real work is done
-sub handle_request
-{
-$acptip = inet_ntoa((unpack_sockaddr_in($_[0]))[1]);
-$localip = $_[1] ? inet_ntoa((unpack_sockaddr_in($_[1]))[1]) : undef;
-if ($config{'loghost'}) {
-	$acpthost = gethostbyaddr(inet_aton($acptip), AF_INET);
-	$acpthost = $acptip if (!$acpthost);
-	}
-else {
-	$acpthost = $acptip;
-	}
-$datestr = &http_date(time());
-$ok_code = 200;
-$ok_message = "Document follows";
-
-# Wait at most 60 secs for start of headers (but only for the first time)
-if (!$checked_timeout) {
-	local $rmask;
-	vec($rmask, fileno(SOCK), 1) = 1;
-	local $sel = select($rmask, undef, undef, 60);
-	$sel || &http_error(400, "Timeout");
-	$checked_timeout++;
-	}
-
-# Read the HTTP request and headers
-($reqline = &read_line()) =~ s/\r|\n//g;
-if (!($reqline =~ /^(GET|POST|HEAD)\s+(.*)\s+HTTP\/1\..$/)) {
-	&http_error(400, "Bad Request");
-	}
-$method = $1; $request_uri = $page = $2;
-%header = ();
-local $lastheader;
-while(1) {
-	($headline = &read_line()) =~ s/\r|\n//g;
-	last if ($headline eq "");
-	if ($headline =~ /^(\S+):\s+(.*)$/) {
-		$header{$lastheader = lc($1)} = $2;
-		}
-	elsif ($headline =~ /^\s+(.*)$/) {
-		$header{$lastheader} .= $headline;
-		}
-	else {
-		&http_error(400, "Bad Header $headline");
-		}
-	}
-if (defined($header{'host'})) {
-	if ($header{'host'} =~ /^([^:]+):([0-9]+)$/) { $host = $1; $port = $2; }
-	else { $host = $header{'host'}; }
-	}
-undef(%in);
-if ($page =~ /^([^\?]+)\?(.*)$/) {
-	# There is some query string information
-	$page = $1;
-	$querystring = $2;
-	if ($querystring !~ /=/) {
-		$queryargs = $querystring;
-		$queryargs =~ s/\+/ /g;
-    		$queryargs =~ s/%(..)/pack("c",hex($1))/ge;
-		$querystring = "";
-		}
-	else {
-		# Parse query-string parameters
-		local @in = split(/\&/, $querystring);
-		foreach $i (@in) {
-			local ($k, $v) = split(/=/, $i, 2);
-			$k =~ s/\+/ /g; $k =~ s/%(..)/pack("c",hex($1))/ge;
-			$v =~ s/\+/ /g; $v =~ s/%(..)/pack("c",hex($1))/ge;
-			$in{$k} = $v;
-			}
-		}
-	}
-$posted_data = undef;
-if ($method eq 'POST' &&
-    $header{'content-type'} eq 'application/x-www-form-urlencoded') {
-	# Read in posted query string information
-	$clen = $header{"content-length"};
-	while(length($posted_data) < $clen) {
-		$buf = &read_data($clen - length($posted_data));
-		if (!length($buf)) {
-			&http_error(500, "Failed to read POST request");
-			}
-		$posted_data .= $buf;
-		}
-	local @in = split(/\&/, $posted_data);
-	foreach $i (@in) {
-		local ($k, $v) = split(/=/, $i, 2);
-		$k =~ s/\+/ /g; $k =~ s/%(..)/pack("c",hex($1))/ge;
-		$v =~ s/\+/ /g; $v =~ s/%(..)/pack("c",hex($1))/ge;
-		$in{$k} = $v;
-		}
-	}
-
-# replace %XX sequences in page
-$page =~ s/%(..)/pack("c",hex($1))/ge;
-
-# check address against access list
-if (@deny && &ip_match($acptip, $localip, @deny) ||
-    @allow && !&ip_match($acptip, $localip, @allow)) {
-	&http_error(403, "Access denied for $acptip");
-	return 0;
-	}
-
-if ($use_libwrap) {
-	# Check address with TCP-wrappers
-	if (!hosts_ctl("miniserv", STRING_UNKNOWN, $acptip, STRING_UNKNOWN)) {
-		&http_error(403, "Access denied for $acptip");
-		return 0;
-		}
-	}
-
-# check for the logout flag file, and if existant deny authentication
-if ($config{'logout'} && -r $config{'logout'}.$in{'miniserv_logout_id'}) {
-	$deny_authentication++;
-	open(LOGOUT, $config{'logout'}.$in{'miniserv_logout_id'});
-	chop($count = <LOGOUT>);
-	close(LOGOUT);
-	$count--;
-	if ($count > 0) {
-		open(LOGOUT, ">$config{'logout'}$in{'miniserv_logout_id'}");
-		print LOGOUT "$count\n";
-		close(LOGOUT);
-		}
-	else {
-		unlink($config{'logout'}.$in{'miniserv_logout_id'});
-		}
-	}
-
-# Check for password if needed
-if (%users) {
-	$validated = 0;
-	$blocked = 0;
-
-	# Session authentication is never used for connections by
-	# another miniserv server
-	if ($header{'user-agent'} =~ /miniserv/i) {
-		$config{'session'} = 0;
-		}
-
-	# check for SSL authentication
-	if ($use_ssl && $verified_client) {
-		$peername = Net::SSLeay::X509_NAME_oneline(
-				Net::SSLeay::X509_get_subject_name(
-					Net::SSLeay::get_peer_certificate(
-						$ssl_con)));
-		foreach $u (keys %certs) {
-			if ($certs{$u} eq $peername) {
-				$authuser = $u;
-				$validated = 2;
-				last;
-				}
-			}
-		}
-
-	# Check for normal HTTP authentication
-	if (!$validated && !$deny_authentication && !$config{'session'} &&
-	    $header{authorization} =~ /^basic\s+(\S+)$/i) {
-		# authorization given..
-		($authuser, $authpass) = split(/:/, &b64decode($1));
-		$validated = &validate_user($authuser, $authpass);
-
-		if ($config{'passdelay'} && !$config{'inetd'}) {
-			# check with main process for delay
-			print $PASSINw "delay $authuser $acptip $validated\n";
-			<$PASSOUTr> =~ /(\d+) (\d+)/;
-			$blocked = $2;
-			sleep($1);
-			}
-		}
-
-	# Check for new session validation
-	if ($config{'session'} && !$deny_authentication && $page eq $config{'session_login'}) {
-		local $ok = &validate_user($in{'user'}, $in{'pass'});
-
-		# check if the test cookie is set
-		if ($header{'cookie'} !~ /testing=1/ && $in{'user'}) {
-			&http_error(500, "No cookies",
-				    "Your browser does not support cookies, ".
-				    "which are required for Webmin to work in ".
-				    "session authentication mode");
-			}
-
-		# check with main process for delay
-		if ($config{'passdelay'} && $in{'user'}) {
-			print $PASSINw "delay $in{'user'} $acptip $ok\n";
-			<$PASSOUTr> =~ /(\d+) (\d+)/;
-			$blocked = $2;
-			sleep($1);
-			}
-
-		if ($ok) {
-			# Logged in OK! Tell the main process about the new SID
-			local $sid = time();
-			local $mul = 1;
-			foreach $c (split(//, crypt($in{'pass'}, substr($$, -2)))) {
-				$sid += ord($c) * $mul;
-				$mul *= 3;
-				}
-			print $PASSINw "new $sid $in{'user'}\n";
-
-			# Set cookie and redirect
-			&write_data("HTTP/1.0 302 Moved Temporarily\r\n");
-			&write_data("Date: $datestr\r\n");
-			&write_data("Server: $config{'server'}\r\n");
-			$portstr = $port == 80 && !$use_ssl ? "" :
-				   $port == 443 && $use_ssl ? "" : ":$port";
-			$prot = $use_ssl ? "https" : "http";
-			if ($in{'save'}) {
-				&write_data("Set-Cookie: sid=$sid; path=/; expires=\"Fri, 1-Jan-2038 00:00:01\"\r\n");
-				}
-			else {
-				&write_data("Set-Cookie: sid=$sid; path=/\r\n");
-				}
-			&write_data("Location: $prot://$host$portstr$in{'page'}\r\n");
-			&write_keep_alive(0);
-			&write_data("\r\n");
-			&log_request($acpthost, $authuser, $reqline, 302, 0);
-			return 0;
-			}
-		elsif ($in{'logout'} && $header{'cookie'} =~ /sid=(\d+)/) {
-			# Logout clicked .. remove the session
-			print $PASSINw "delete $1\n";
-			local $dummy = <$PASSINr>;
-			$logout = 1;
-			$already_session_id = undef;
-			}
-		else {
-			# Login failed .. display the form again
-			$failed_user = $in{'user'};
-			$request_uri = $in{'page'};
-			$already_session_id = undef;
-			}
-		}
-
-	# Check for an existing session
-	if ($config{'session'} && !$validated) {
-		if ($already_session_id) {
-			$session_id = $already_session_id;
-			$authuser = $already_authuser;
-			$validated = 1;
-			}
-		elsif (!$deny_authentication && $header{'cookie'} =~ /sid=(\d+)/) {
-			$session_id = $1;
-			print $PASSINw "verify $session_id\n";
-			<$PASSOUTr> =~ /(\d+)\s+(\S+)/;
-			if ($1 == 2) {
-				# Valid session continuation
-				$validated = 1;
-				$authuser = $2;
-				$already_session_id = $session_id;
-				$already_authuser = $authuser;
-				}
-			elsif ($1 == 1) {
-				# Session timed out
-				$timed_out = $2;
-				}
-			else {
-				# Invalid session ID .. don't set verified
-				}
-			}
-		}
-
-	# Check for local authentication
-	if ($localauth_user) {
-		if (defined($users{$localauth_user})) {
-			$validated = 1;
-			$authuser = $localauth_user;
-			}
-		else {
-			$localauth_user = undef;
-			}
-		}
-
-	if (!$validated) {
-		if ($blocked == 0) {
-			# No password given.. ask
-			if ($config{'session'}) {
-				# Force CGI for session login
-				$validated = 1;
-				if ($logout) {
-					$querystring .= "&logout=1&page=/";
-					}
-				else {
-					$querystring = "page=".&urlize($request_uri);
-					}
-				$querystring .= "&failed=$failed_user" if ($failed_user);
-				$querystring .= "&timed_out=$timed_out" if ($timed_out);
-				$queryargs = "";
-				$page = $config{'session_login'};
-				}
-			else {
-				# Ask for login with HTTP authentication
-				&write_data("HTTP/1.0 401 Unauthorized\r\n");
-				&write_data("Date: $datestr\r\n");
-				&write_data("Server: $config{'server'}\r\n");
-				&write_data("WWW-authenticate: Basic ".
-					   "realm=\"$config{'realm'}\"\r\n");
-				&write_keep_alive(0);
-				&write_data("Content-type: text/html\r\n");
-				&write_data("\r\n");
-				&reset_byte_count();
-				&write_data("<html>\n");
-				&write_data("<head><title>Unauthorized</title></head>\n");
-				&write_data("<body><h1>Unauthorized</h1>\n");
-				&write_data("A password is required to access this\n");
-				&write_data("web server. Please try again. <p>\n");
-				&write_data("</body></html>\n");
-				&log_request($acpthost, undef, $reqline, 401, &byte_count());
-				return 0;
-				}
-			}
-		else {
-			# when the host has been blocked, give it an error message
-			&http_error(403, "Access denied for $acptip. The host has been blocked "
-				."because of too many authentication failures.");
-			}
-		}
-
-	# Check per-user IP access control
-	if ($deny{$authuser} && &ip_match($acptip, $localip, @{$deny{$authuser}}) ||
-	    $allow{$authuser} && !&ip_match($acptip, $localip, @{$allow{$authuser}})) {
-		&http_error(403, "Access denied for $acptip");
-		return 0;
-		}
-	}
-
-# Figure out what kind of page was requested
-rerun:
-$simple = &simplify_path($page, $bogus);
-$simple =~ s/[\000-\037]//g;
-if ($bogus) {
-	&http_error(400, "Invalid path");
-	}
-undef($full);
-if ($config{'preroot'}) {
-	# Look in the template root directory first
-	$is_directory = 1;
-	$sofar = "";
-	$full = $config{"preroot"} . $sofar;
-	$scriptname = $simple;
-	foreach $b (split(/\//, $simple)) {
-		if ($b ne "") { $sofar .= "/$b"; }
-		$full = $config{"preroot"} . $sofar;
-		@st = stat($full);
-		if (!@st) { undef($full); last; }
-
-		# Check if this is a directory
-		if (-d $full) {
-			# It is.. go on parsing
-			$is_directory = 1;
-			next;
-			}
-		else { $is_directory = 0; }
-
-		# Check if this is a CGI program
-		if (&get_type($full) eq "internal/cgi") {
-			$pathinfo = substr($simple, length($sofar));
-			$pathinfo .= "/" if ($page =~ /\/$/);
-			$scriptname = $sofar;
-			last;
-			}
-		}
-	if ($full) {
-		if ($sofar eq '') {
-			$cgi_pwd = $config{'root'};
-			}
-		else {
-			"$config{'root'}$sofar" =~ /^(.*\/)[^\/]+$/;
-			$cgi_pwd = $1;
-			}
-		if ($is_directory) {
-			# Check for index files in the directory
-			foreach $idx (split(/\s+/, $config{"index_docs"})) {
-				$idxfull = "$full/$idx";
-				if (-r $idxfull && !(-d $idxfull)) {
-					$full = $idxfull;
-					$is_directory = 0;
-					$scriptname .= "/"
-						if ($scriptname ne "/");
-					last;
-					}
-				}
-			}
-		}
-	}
-if (!$full || $is_directory) {
-	$sofar = "";
-	$full = $config{"root"} . $sofar;
-	$scriptname = $simple;
-	foreach $b (split(/\//, $simple)) {
-		if ($b ne "") { $sofar .= "/$b"; }
-		$full = $config{"root"} . $sofar;
-		@st = stat($full);
-		if (!@st) { &http_error(404, "File not found"); }
-
-		# Check if this is a directory
-		if (-d $full) {
-			# It is.. go on parsing
-			next;
-			}
-
-		# Check if this is a CGI program
-		if (&get_type($full) eq "internal/cgi") {
-			$pathinfo = substr($simple, length($sofar));
-			$pathinfo .= "/" if ($page =~ /\/$/);
-			$scriptname = $sofar;
-			last;
-			}
-		}
-	$full =~ /^(.*\/)[^\/]+$/; $cgi_pwd = $1;
-	}
-
-# check filename against denyfile regexp
-local $denyfile = $config{'denyfile'};
-if ($denyfile && $full =~ /$denyfile/) {
-	&http_error(403, "Access denied to $page");
-	return 0;
-	}
-
-# Reached the end of the path OK.. see what we've got
-if (-d $full) {
-	# See if the URL ends with a / as it should
-	if ($page !~ /\/$/) {
-		# It doesn't.. redirect
-		&write_data("HTTP/1.0 302 Moved Temporarily\r\n");
-		$portstr = $port == 80 && !$use_ssl ? "" :
-			   $port == 443 && $use_ssl ? "" : ":$port";
-		&write_data("Date: $datestr\r\n");
-		&write_data("Server: $config{server}\r\n");
-		$prot = $use_ssl ? "https" : "http";
-		&write_data("Location: $prot://$host$portstr$page/\r\n");
-		&write_keep_alive(0);
-		&write_data("\r\n");
-		&log_request($acpthost, $authuser, $reqline, 302, 0);
-		return 0;
-		}
-	# A directory.. check for index files
-	foreach $idx (split(/\s+/, $config{"index_docs"})) {
-		$idxfull = "$full/$idx";
-		if (-r $idxfull && !(-d $idxfull)) {
-			$cgi_pwd = $full;
-			$full = $idxfull;
-			$scriptname .= "/" if ($scriptname ne "/");
-			last;
-			}
-		}
-	}
-if (-d $full) {
-	# This is definately a directory.. list it
-	&write_data("HTTP/1.0 $ok_code $ok_message\r\n");
-	&write_data("Date: $datestr\r\n");
-	&write_data("Server: $config{server}\r\n");
-	&write_data("Content-type: text/html\r\n");
-	&write_keep_alive(0);
-	&write_data("\r\n");
-	&reset_byte_count();
-	&write_data("<h1>Index of $simple</h1>\n");
-	&write_data("<pre>\n");
-	&write_data(sprintf "%-35.35s %-20.20s %-10.10s\n",
-			"Name", "Last Modified", "Size");
-	&write_data("<hr>\n");
-	opendir(DIR, $full);
-	while($df = readdir(DIR)) {
-		if ($df =~ /^\./) { next; }
-		(@stbuf = stat("$full/$df")) || next;
-		if (-d "$full/$df") { $df .= "/"; }
-		@tm = localtime($stbuf[9]);
-		$fdate = sprintf "%2.2d/%2.2d/%4.4d %2.2d:%2.2d:%2.2d",
-				$tm[3],$tm[4]+1,$tm[5]+1900,
-				$tm[0],$tm[1],$tm[2];
-		$len = length($df); $rest = " "x(35-$len);
-		&write_data(sprintf 
-		 "<a href=\"%s\">%-${len}.${len}s</a>$rest %-20.20s %-10.10s\n",
-		 $df, $df, $fdate, $stbuf[7]);
-		}
-	closedir(DIR);
-	&log_request($acpthost, $authuser, $reqline, $ok_code, &byte_count());
-	return 0;
-	}
-
-# CGI or normal file
-local $rv;
-if (&get_type($full) eq "internal/cgi") {
-	# A CGI program to execute
-	$envtz = $ENV{"TZ"};
-	$envuser = $ENV{"USER"};
-	$envpath = $ENV{"PATH"};
-	foreach (keys %ENV) { delete($ENV{$_}); }
-	$ENV{"PATH"} = $envpath if ($envpath);
-	$ENV{"TZ"} = $envtz if ($envtz);
-	$ENV{"USER"} = $envuser if ($envuser);
-	$ENV{"HOME"} = $user_homedir;
-	$ENV{"SERVER_SOFTWARE"} = $config{"server"};
-	$ENV{"SERVER_NAME"} = $host;
-	$ENV{"SERVER_ADMIN"} = $config{"email"};
-	$ENV{"SERVER_ROOT"} = $config{"root"};
-	$ENV{"SERVER_PORT"} = $port;
-	$ENV{"REMOTE_HOST"} = $acpthost;
-	$ENV{"REMOTE_ADDR"} = $acptip;
-	$ENV{"REMOTE_USER"} = $authuser if (defined($authuser));
-	$ENV{"SSL_USER"} = $peername if ($validated == 2);
-	$ENV{"DOCUMENT_ROOT"} = $config{"root"};
-	$ENV{"GATEWAY_INTERFACE"} = "CGI/1.1";
-	$ENV{"SERVER_PROTOCOL"} = "HTTP/1.0";
-	$ENV{"REQUEST_METHOD"} = $method;
-	$ENV{"SCRIPT_NAME"} = $scriptname;
-	$ENV{"REQUEST_URI"} = $request_uri;
-	$ENV{"PATH_INFO"} = $pathinfo;
-	$ENV{"PATH_TRANSLATED"} = "$config{root}/$pathinfo";
-	$ENV{"QUERY_STRING"} = $querystring;
-	$ENV{"MINISERV_CONFIG"} = $conf;
-	$ENV{"HTTPS"} = "ON" if ($use_ssl);
-	$ENV{"SESSION_ID"} = $session_id if ($session_id);
-	$ENV{"LOCAL_USER"} = $localauth_user if ($localauth_user);
-	if (defined($header{"content-length"})) {
-		$ENV{"CONTENT_LENGTH"} = $header{"content-length"};
-		}
-	if (defined($header{"content-type"})) {
-		$ENV{"CONTENT_TYPE"} = $header{"content-type"};
-		}
-	foreach $h (keys %header) {
-		($hname = $h) =~ tr/a-z/A-Z/;
-		$hname =~ s/\-/_/g;
-		$ENV{"HTTP_$hname"} = $header{$h};
-		}
-	$ENV{"PWD"} = $cgi_pwd;
-	foreach $k (keys %config) {
-		if ($k =~ /^env_(\S+)$/) {
-			$ENV{$1} = $config{$k};
-			}
-		}
-	delete($ENV{'HTTP_AUTHORIZATION'});
-	$ENV{'HTTP_COOKIE'} =~ s/;?\s*sid=(\d+)//;
-
-	# Check if the CGI can be handled internally
-	open(CGI, $full);
-	local $first = <CGI>;
-	close(CGI);
-	$first =~ s/[#!\r\n]//g;
-	$nph_script = ($full =~ /\/nph-([^\/]+)$/);
-	if (!$config{'forkcgis'} && $first eq $perl_path && $] >= 5.004) {
-		# setup environment for eval
-		chdir($ENV{"PWD"});
-		@ARGV = split(/\s+/, $queryargs);
-		$0 = $full;
-		if ($posted_data) {
-			# Already read the post input
-			$postinput = $posted_data;
-			}
-		elsif ($method eq "POST") {
-			$clen = $header{"content-length"};
-			while(length($postinput) < $clen) {
-				$buf = &read_data($clen - length($postinput));
-				if (!length($buf)) {
-					&http_error(500, "Failed to read ".
-							 "POST request");
-					}
-				$postinput .= $buf;
-				}
-			}
-		$SIG{'CHLD'} = 'DEFAULT';
-		eval {
-			# Have SOCK closed if the perl exec's something
-			use Fcntl;
-			fcntl(SOCK, F_SETFD, FD_CLOEXEC);
-			};
-		shutdown(SOCK, 0);
-
-		if ($config{'log'}) {
-			open(MINISERVLOG, ">>$config{'logfile'}");
-			chmod(0600, $config{'logfile'});
-			}
-		$doing_eval = 1;
-		eval {
-			package main;
-			tie(*STDOUT, 'miniserv');
-			tie(*STDIN, 'miniserv');
-			do $miniserv::full;
-			die $@ if ($@);
-			};
-		$doing_eval = 0;
-		if ($@) {
-			# Error in perl!
-			&http_error(500, "Perl execution failed", $@);
-			}
-		elsif (!$doneheaders && !$nph_script) {
-			&http_error(500, "Missing Headers");
-			}
-		#close(SOCK);
-		$rv = 0;
-		}
-	else {
-		# fork the process that actually executes the CGI
-		pipe(CGIINr, CGIINw);
-		pipe(CGIOUTr, CGIOUTw);
-		pipe(CGIERRr, CGIERRw);
-		if (!($cgipid = fork())) {
-			chdir($ENV{"PWD"});
-			close(SOCK);
-			open(STDIN, "<&CGIINr");
-			open(STDOUT, ">&CGIOUTw");
-			open(STDERR, ">&CGIERRw");
-			close(CGIINw); close(CGIOUTr); close(CGIERRr);
-			exec($full, split(/\s+/, $queryargs));
-			print STDERR "Failed to exec $full : $!\n";
-			exit;
-			}
-		close(CGIINr); close(CGIOUTw); close(CGIERRw);
-
-		# send post data
-		if ($posted_data) {
-			# already read the posted data
-			print CGIINw $posted_data;
-			}
-		elsif ($method eq "POST") {
-			$got = 0; $clen = $header{"content-length"};
-			while($got < $clen) {
-				$buf = &read_data($clen-$got);
-				if (!length($buf)) {
-					kill('TERM', $cgipid);
-					&http_error(500, "Failed to read ".
-							 "POST request");
-					}
-				$got += length($buf);
-				print CGIINw $buf;
-				}
-			}
-		close(CGIINw);
-		shutdown(SOCK, 0);
-
-		if (!$nph_script) {
-			# read back cgi headers
-			select(CGIOUTr); $|=1; select(STDOUT);
-			$got_blank = 0;
-			while(1) {
-				$line = <CGIOUTr>;
-				$line =~ s/\r|\n//g;
-				if ($line eq "") {
-					if ($got_blank || %cgiheader) { last; }
-					$got_blank++;
-					next;
-					}
-				($line =~ /^(\S+):\s+(.*)$/) ||
-					&http_error(500, "Bad Header",
-						    &read_errors(CGIERRr));
-				$cgiheader{lc($1)} = $2;
-				}
-			if ($cgiheader{"location"}) {
-				&write_data("HTTP/1.0 302 Moved Temporarily\r\n");
-				&write_data("Date: $datestr\r\n");
-				&write_data("Server: $config{'server'}\r\n");
-				&write_keep_alive(0);
-				# ignore the rest of the output. This is a hack, but
-				# is necessary for IE in some cases :(
-				close(CGIOUTr); close(CGIERRr);
-				}
-			elsif ($cgiheader{"content-type"} eq "") {
-				&http_error(500, "Missing Content-Type Header",
-					    &read_errors(CGIERRr));
-				}
-			else {
-				&write_data("HTTP/1.0 $ok_code $ok_message\r\n");
-				&write_data("Date: $datestr\r\n");
-				&write_data("Server: $config{'server'}\r\n");
-				&write_keep_alive(0);
-				}
-			foreach $h (keys %cgiheader) {
-				&write_data("$h: $cgiheader{$h}\r\n");
-				}
-			&write_data("\r\n");
-			}
-		&reset_byte_count();
-		while($line = <CGIOUTr>) {
-			&write_data($line);
-			}
-		close(CGIOUTr); close(CGIERRr);
-		$rv = 0;
-		}
-	}
-else {
-	# A file to output
-	local @st = stat($full);
-	open(FILE, $full) || &http_error(404, "Failed to open file");
-	&write_data("HTTP/1.0 $ok_code $ok_message\r\n");
-	&write_data("Date: $datestr\r\n");
-	&write_data("Server: $config{server}\r\n");
-	&write_data("Content-type: ".&get_type($full)."\r\n");
-	&write_data("Content-length: $st[7]\r\n");
-	&write_data("Last-Modified: ".&http_date($st[9])."\r\n");
-	&write_keep_alive();
-	&write_data("\r\n");
-	&reset_byte_count();
-	while(read(FILE, $buf, 1024) > 0) {
-		&write_data($buf);
-		}
-	close(FILE);
-	$rv = &check_keep_alive();
-	}
-
-# log the request
-&log_request($acpthost, $authuser, $reqline,
-	     $cgiheader{"location"} ? "302" : $ok_code, &byte_count());
-return $rv;
-}
-
-# http_error(code, message, body, [dontexit])
-sub http_error
-{
-close(CGIOUT);
-local $eh = $error_handler_recurse ? undef :
-	    $config{"error_handler_$_[0]"} ? $config{"error_handler_$_[0]"} :
-	    $config{'error_handler'} ? $config{'error_handler'} : undef;
-if ($eh) {
-	# Call a CGI program for the error
-	$page = "/$eh";
-	$querystring = "code=$_[0]&message=".&urlize($_[1]).
-		       "&body=".&urlize($_[2]);
-	$error_handler_recurse++;
-	$ok_code = $_[0];
-	$ok_message = $_[1];
-	goto rerun;
-	}
-else {
-	# Use the standard error message display
-	&write_data("HTTP/1.0 $_[0] $_[1]\r\n");
-	&write_data("Server: $config{server}\r\n");
-	&write_data("Date: $datestr\r\n");
-	&write_data("Content-type: text/html\r\n");
-	&write_keep_alive(0);
-	&write_data("\r\n");
-	&reset_byte_count();
-	&write_data("<h1>Error - $_[1]</h1>\n");
-	if ($_[2]) {
-		&write_data("<pre>$_[2]</pre>\n");
-		}
-	}
-&log_request($acpthost, $authuser, $reqline, $_[0], &byte_count())
-	if ($reqline);
-shutdown(SOCK, 1);
-exit if (!$_[3]);
-}
-
-sub get_type
-{
-if ($_[0] =~ /\.([A-z0-9]+)$/) {
-	$t = $mime{$1};
-	if ($t ne "") {
-		return $t;
-		}
-	}
-return "text/plain";
-}
-
-# simplify_path(path, bogus)
-# Given a path, maybe containing stuff like ".." and "." convert it to a
-# clean, absolute form.
-sub simplify_path
-{
-local($dir, @bits, @fixedbits, $b);
-$dir = $_[0];
-$dir =~ s/^\/+//g;
-$dir =~ s/\/+$//g;
-@bits = split(/\/+/, $dir);
-@fixedbits = ();
-$_[1] = 0;
-foreach $b (@bits) {
-        if ($b eq ".") {
-                # Do nothing..
-                }
-        elsif ($b eq "..") {
-                # Remove last dir
-                if (scalar(@fixedbits) == 0) {
-                        $_[1] = 1;
-                        return "/";
-                        }
-                pop(@fixedbits);
-                }
-        else {
-                # Add dir to list
-                push(@fixedbits, $b);
-                }
-        }
-return "/" . join('/', @fixedbits);
-}
-
-# b64decode(string)
-# Converts a string from base64 format to normal
-sub b64decode
-{
-    local($str) = $_[0];
-    local($res);
-    $str =~ tr|A-Za-z0-9+=/||cd;
-    $str =~ s/=+$//;
-    $str =~ tr|A-Za-z0-9+/| -_|;
-    while ($str =~ /(.{1,60})/gs) {
-        my $len = chr(32 + length($1)*3/4);
-        $res .= unpack("u", $len . $1 );
-    }
-    return $res;
-}
-
-# ip_match(remoteip, localip, [match]+)
-# Checks an IP address against a list of IPs, networks and networks/masks
-sub ip_match
-{
-local(@io, @mo, @ms, $i, $j);
-@io = split(/\./, $_[0]);
-local $hn;
-if (!defined($hn = $ip_match_cache{$_[0]})) {
-	$hn = gethostbyaddr(inet_aton($_[0]), AF_INET);
-	$hn = "" if ((&to_ipaddress($hn))[0] ne $_[0]);
-	$ip_match_cache{$_[0]} = $hn;
-	}
-for($i=2; $i<@_; $i++) {
-	local $mismatch = 0;
-	if ($_[$i] =~ /^(\S+)\/(\S+)$/) {
-		# Compare with network/mask
-		@mo = split(/\./, $1); @ms = split(/\./, $2);
-		for($j=0; $j<4; $j++) {
-			if ((int($io[$j]) & int($ms[$j])) != int($mo[$j])) {
-				$mismatch = 1;
-				}
-			}
-		}
-	elsif ($_[$i] =~ /^\*(\S+)$/) {
-		# Compare with hostname regexp
-		$mismatch = 1 if ($hn !~ /$1$/);
-		}
-	elsif ($_[$i] eq 'LOCAL') {
-		# Compare with local network
-		local @lo = split(/\./, $_[1]);
-		if ($lo[0] < 128) {
-			$mismatch = 1 if ($lo[0] != $io[0]);
-			}
-		elsif ($lo[0] < 192) {
-			$mismatch = 1 if ($lo[0] != $io[0] ||
-					  $lo[1] != $io[1]);
-			}
-		else {
-			$mismatch = 1 if ($lo[0] != $io[0] ||
-					  $lo[1] != $io[1] ||
-					  $lo[2] != $io[2]);
-			}
-		}
-	else {
-		# Compare with IP or network
-		@mo = split(/\./, $_[$i]);
-		while(@mo && !$mo[$#mo]) { pop(@mo); }
-		for($j=0; $j<@mo; $j++) {
-			if ($mo[$j] != $io[$j]) {
-				$mismatch = 1;
-				}
-			}
-		}
-	return 1 if (!$mismatch);
-	}
-return 0;
-}
-
-# restart_miniserv()
-# Called when a SIGHUP is received to restart the web server. This is done
-# by exec()ing perl with the same command line as was originally used
-sub restart_miniserv
-{
-close(SOCK); close(MAIN);
-foreach $p (@passin) { close($p); }
-foreach $p (@passout) { close($p); }
-if ($logclearer) { kill('TERM', $logclearer);	}
-exec($perl_path, $miniserv_path, @miniserv_argv);
-die "Failed to restart miniserv with $perl_path $miniserv_path";
-}
-
-sub trigger_restart
-{
-$need_restart = 1;
-}
-
-sub to_ipaddress
-{
-local (@rv, $i);
-foreach $i (@_) {
-	if ($i =~ /(\S+)\/(\S+)/ || $i =~ /^\*\S+$/ ||
-	    $i eq 'LOCAL') { push(@rv, $i); }
-	else { push(@rv, join('.', unpack("CCCC", inet_aton($i)))); }
-	}
-return @rv;
-}
-
-# read_line()
-# Reads one line from SOCK or SSL
-sub read_line
-{
-local($idx, $more, $rv);
-if ($use_ssl) {
-	while(($idx = index($read_buffer, "\n")) < 0) {
-		# need to read more..
-		if (!($more = Net::SSLeay::read($ssl_con))) {
-			# end of the data
-			$rv = $read_buffer;
-			undef($read_buffer);
-			return $rv;
-			}
-		$read_buffer .= $more;
-		}
-	$rv = substr($read_buffer, 0, $idx+1);
-	$read_buffer = substr($read_buffer, $idx+1);
-	return $rv;
-	}
-else { return <SOCK>; }
-}
-
-# read_data(length)
-# Reads up to some amount of data from SOCK or the SSL connection
-sub read_data
-{
-if ($use_ssl) {
-	local($rv);
-	if (length($read_buffer)) {
-		$rv = $read_buffer;
-		undef($read_buffer);
-		return $rv;
-		}
-	else {
-		return Net::SSLeay::read($ssl_con, $_[0]);
-		}
-	}
-else {
-	local $buf;
-	read(SOCK, $buf, $_[0]) || return undef;
-	return $buf;
-	}
-}
-
-# write_data(data)
-# Writes a string to SOCK or the SSL connection
-sub write_data
-{
-if ($use_ssl) {
-	Net::SSLeay::write($ssl_con, $_[0]);
-	}
-else {
-	syswrite(SOCK, $_[0], length($_[0]));
-	}
-$write_data_count += length($_[0]);
-}
-
-# reset_byte_count()
-sub reset_byte_count { $write_data_count = 0; }
-
-# byte_count()
-sub byte_count { return $write_data_count; }
-
-# log_request(hostname, user, request, code, bytes)
-sub log_request
-{
-if ($config{'log'}) {
-	local(@tm, $dstr, $user, $ident, $headers);
-	if ($config{'logident'}) {
-		# add support for rfc1413 identity checking here
-		}
-	else { $ident = "-"; }
-	@tm = localtime(time());
-	$dstr = sprintf "%2.2d/%s/%4.4d:%2.2d:%2.2d:%2.2d %s",
-			$tm[3], $make_date_marr[$tm[4]], $tm[5]+1900,
-	                $tm[2], $tm[1], $tm[0], $timezone;
-	$user = $_[1] ? $_[1] : "-";
-	if (fileno(MINISERVLOG)) {
-		seek(MINISERVLOG, 0, 2);
-		}
-	else {
-		open(MINISERVLOG, ">>$config{'logfile'}");
-		chmod(0600, $config{'logfile'});
-		}
-	foreach $h (split(/\s+/, $config{'logheaders'})) {
-		$headers .= " $h=\"$header{$h}\"";
-		}
-	print MINISERVLOG "$_[0] $ident $user [$dstr] \"$_[2]\" ",
-			  "$_[3] $_[4]$headers\n";
-	close(MINISERVLOG);
-	}
-}
-
-# read_errors(handle)
-# Read and return all input from some filehandle
-sub read_errors
-{
-local($fh, $_, $rv);
-$fh = $_[0];
-while(<$fh>) { $rv .= $_; }
-return $rv;
-}
-
-sub write_keep_alive
-{
-local $mode;
-if (@_) { $mode = $_[0]; }
-else { $mode = &check_keep_alive(); }
-&write_data("Connection: ".($mode ? "Keep-Alive" : "close")."\r\n");
-}
-
-sub check_keep_alive
-{
-return $header{'connection'} =~ /keep-alive/i;
-}
-
-sub term_handler
-{
-if (@childpids) {
-	kill('TERM', @childpids);
-	}
-exit(1);
-}
-
-sub http_date
-{
-local @tm = gmtime($_[0]);
-return sprintf "%s, %d %s %d %2.2d:%2.2d:%2.2d GMT",
-		$weekday[$tm[6]], $tm[3], $month[$tm[4]], $tm[5]+1900,
-		$tm[2], $tm[1], $tm[0];
-}
-
-sub TIEHANDLE
-{
-my $i; bless \$i, shift;
-}
- 
-sub WRITE
-{
-$r = shift;
-my($buf,$len,$offset) = @_;
-&write_to_sock(substr($buf, $offset, $len));
-}
- 
-sub PRINT
-{
-$r = shift;
-$$r++;
-&write_to_sock(@_);
-}
- 
-sub PRINTF
-{
-shift;
-my $fmt = shift;
-&write_to_sock(sprintf $fmt, @_);
-}
- 
-sub READ
-{
-$r = shift;
-substr($_[0], $_[2], $_[1]) = substr($postinput, $postpos, $_[1]);
-$postpos += $_[1];
-}
-
-sub OPEN
-{
-print STDERR "open() called - should never happen!\n";
-}
- 
-sub READLINE
-{
-if ($postpos >= length($postinput)) {
-	return undef;
-	}
-local $idx = index($postinput, "\n", $postpos);
-if ($idx < 0) {
-	local $rv = substr($postinput, $postpos);
-	$postpos = length($postinput);
-	return $rv;
-	}
-else {
-	local $rv = substr($postinput, $postpos, $idx-$postpos+1);
-	$postpos = $idx+1;
-	return $rv;
-	}
-}
- 
-sub GETC
-{
-return $postpos >= length($postinput) ? undef
-				      : substr($postinput, $postpos++, 1);
-}
- 
-sub CLOSE { }
- 
-sub DESTROY { }
-
-# write_to_sock(data, ...)
-sub write_to_sock
-{
-foreach $d (@_) {
-	if ($doneheaders || $miniserv::nph_script) {
-		&write_data($d);
-		}
-	else {
-		$headers .= $d;
-		while(!$doneheaders && $headers =~ s/^(.*)(\r)?\n//) {
-			if ($1 =~ /^(\S+):\s+(.*)$/) {
-				$cgiheader{lc($1)} = $2;
-				}
-			elsif ($1 !~ /\S/) {
-				$doneheaders++;
-				}
-			else {
-				&http_error(500, "Bad Header");
-				}
-			}
-		if ($doneheaders) {
-			if ($cgiheader{"location"}) {
-				&write_data(
-					"HTTP/1.0 302 Moved Temporarily\r\n");
-				&write_data("Date: $datestr\r\n");
-				&write_data("Server: $config{server}\r\n");
-				&write_keep_alive(0);
-				}
-			elsif ($cgiheader{"content-type"} eq "") {
-				&http_error(500, "Missing Content-Type Header");
-				}
-			else {
-				&write_data("HTTP/1.0 $ok_code $ok_message\r\n");
-				&write_data("Date: $datestr\r\n");
-				&write_data("Server: $config{server}\r\n");
-				&write_keep_alive(0);
-				}
-			foreach $h (keys %cgiheader) {
-				&write_data("$h: $cgiheader{$h}\r\n");
-				}
-			&write_data("\r\n");
-			&reset_byte_count();
-			&write_data($headers);
-			}
-		}
-	}
-}
-
-sub verify_client
-{
-local $cert = Net::SSLeay::X509_STORE_CTX_get_current_cert($_[1]);
-if ($cert) {
-	local $errnum = Net::SSLeay::X509_STORE_CTX_get_error($_[1]);
-	$verified_client = 1 if (!$errnum);
-	}
-return 1;
-}
-
-sub END
-{
-if ($doing_eval) {
-	# A CGI program called exit! This is a horrible hack to 
-	# finish up before really exiting
-	close(SOCK);
-	&log_request($acpthost, $authuser, $reqline,
-		     $cgiheader{"location"} ? "302" : $ok_code, &byte_count());
-	}
-}
-
-# urlize
-# Convert a string to a form ok for putting in a URL
-sub urlize {
-  local($tmp, $tmp2, $c);
-  $tmp = $_[0];
-  $tmp2 = "";
-  while(($c = chop($tmp)) ne "") {
-	if ($c !~ /[A-z0-9]/) {
-		$c = sprintf("%%%2.2X", ord($c));
-		}
-	$tmp2 = $c . $tmp2;
-	}
-  return $tmp2;
-}
-
-# validate_user(username, password)
-sub validate_user
-{
-return 0 if (!$_[0] || !$users{$_[0]});
-if ($users{$_[0]} eq 'x' && $use_pam) {
-	$pam_username = $_[0];
-	$pam_password = $_[1];
-	local $pamh = new Authen::PAM("miniserv", $pam_username, \&pam_conv_func);
-	if (!ref($pamh)) {
-		print STDERR "PAM init failed : $pamh\n";
-		return 0;
-		}
-	local $pam_ret = $pamh->pam_authenticate();
-	return $pam_ret == PAM_SUCCESS ? 1 : 0;
-	}
-else {
-	return $users{$_[0]} eq crypt($_[1], $users{$_[0]}) ? 1 : 0;
-	}
-}
-
-# the PAM conversation function for interactive logins
-sub pam_conv_func
-{
-my @res;
-while ( @_ ) {
-	my $code = shift;
-	my $msg = shift;
-	my $ans = "";
-
-	$ans = $pam_username if ($code == PAM_PROMPT_ECHO_ON() );
-	$ans = $pam_password if ($code == PAM_PROMPT_ECHO_OFF() );
-
-	push @res, PAM_SUCCESS();
-	push @res, $ans;
-	}
-push @res, PAM_SUCCESS();
-return @res;
-}
-
diff --git a/perl-install/standalone/interactive_http/miniserv.users b/perl-install/standalone/interactive_http/miniserv.users
deleted file mode 100644
index f7338497a..000000000
--- a/perl-install/standalone/interactive_http/miniserv.users
+++ /dev/null
@@ -1 +0,0 @@
-root:x:0
diff --git a/perl-install/standalone/keyboarddrake b/perl-install/standalone/keyboarddrake
deleted file mode 100755
index a6c415c7e..000000000
--- a/perl-install/standalone/keyboarddrake
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-
-
-use interactive;
-use keyboard;
-use standalone;
-use Xconfigurator_consts;
-use common;
-use c;
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-local $_ = join '', @ARGV;
-
-/-h/ and die _("usage: keyboarddrake [--expert] [keyboard]\n");
-
-$::expert = /-expert/;
-
-print "[$::expert]\n";
-my $keyboard='';
-if ($::expert) { ($keyboard) = grep { !/^-/ } @ARGV;}
-print "[$keyboard]\n";
-my $in = 'interactive'->vnew('su', 'keyboard');
-
-begin:
-$::isEmbedded and kill USR2, $::CCPID;
-$keyboard ||= $in->ask_from_listf_(_("Keyboard"),
-				   _("Please, choose your keyboard layout."),
-				   \&keyboard::keyboard2text,
-				   [ keyboard::keyboards() ],
-				   keyboard::read());
-if ($keyboard) {
-    keyboard::keyboard2text($keyboard) or die "bad keyboard $keyboard\n";
-
-    my $isNotDelete = $::expert && !$in->ask_yesorno("BackSpace", _("Do you want the BackSpace to return Delete in console?"), 1);
-
-    my $kmap = keyboard::keyboard2kmap($keyboard);
-    system('loadkeys', $kmap);
-
-    my $xkb = keyboard::keyboard2xkb($keyboard);
-    system('setxkbmap', $xkb);
-
-    my $f = "/etc/X11/XF86Config";
-    my $g = "/etc/X11/XF86Config-4";
-
-    substInFile {
-	if (/^Section\s+"Keyboard"/ .. /^EndSection/) {
-	    s|^(\s*XkbLayout\s+).*|$1"$xkb"| 
-	      and $_ .= join '', map { "    $_\n" } @{$Xconfigurator::xkb_options{$xkb} || []};
-	    $_ = '' if m,^(\s*(XkbVariant|XkbOptions)\s+),; # remove existing one
-	}
-    } $f if -e $f && !$::testing;
-
-    substInFile {
-	if (/Identifier\s+"Keyboard1"/ .. /^EndSection/) {
-	    s|^(\s*Option\s+"XkbLayout"\s+).*|$1"$xkb"| 
-	      and $_ .= join '', map { /(\S+)(.*)/; qq(    Option "$1" $2\n) } @{$Xconfigurator::xkb_options{$xkb} || []};
-	    $_ = '' if m,^(\s*Option\s+"(XkbVariant|XkbOptions)"\s+),; # remove existing one
-	}
-    } $g if -e $g && !$::testing;
-
-    keyboard::write('', $keyboard, $isNotDelete);
-}
-
-if ($::isEmbedded) {
-    kill(USR1, $::CCPID);
-    $keyboard = '';
-    goto begin;
-} else {
-    $in->exit(0);
-}
diff --git a/perl-install/standalone/livedrake b/perl-install/standalone/livedrake
deleted file mode 100755
index bb689996f..000000000
--- a/perl-install/standalone/livedrake
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-
-use common;
-use interactive;
-use standalone;
-use run_program;
-use c;
-
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: livedrake [--testing]\n";
-
-$::testing = /-testing/;
-
-my $in = 'interactive'->vnew('su', 'default');
-
-my $cd_mntpoint = "/mnt/cdrom";
-
-while (! -x "$cd_mntpoint/Mandrake/mdkinst/usr/bin/perl-install/live_install") {
-    ejectCdrom();
-    $in->ask_okcancel(_("Change Cd-Rom"),
-_("Please insert the Installation Cd-Rom in your drive and press Ok when done.
-If you don't have it, press Cancel to avoid live upgrade."), 1) or $in->exit(0);
-    run_program::run("mount", "/mnt/cdrom");
-}
-
-if (-x "$cd_mntpoint/Mandrake/mdkinst/usr/bin/perl-install/live_install") {
-    chdir "/$cd_mntpoint/Mandrake/mdkinst/usr/bin/perl-install/";
-    $::testing or exec "./live_install";
-}
-
-$in->ask_warn('', _("Unable to start live upgrade !!!\n"));
-$in->exit(1);
-
-sub ejectCdrom {
-    my ($cdrom) = @_;
-    $cdrom or cat_("/proc/mounts") =~ m|(/dev/\S+)\s+/mnt/cdrom\s| and $cdrom = $1;
-    $cdrom or cat_("/etc/fstab") =~ m|(/dev/\S+)\s+/mnt/cdrom\s| and $cdrom = $1;
-    my $f = eval { $cdrom && detect_devices::tryOpen($cdrom) } or return;
-    run_program::run("umount", "/mnt/cdrom");
-    ioctl $f, c::CDROM_LOCKDOOR(), 0;
-    ioctl $f, c::CDROMEJECT(), 1;
-}
diff --git a/perl-install/standalone/localedrake b/perl-install/standalone/localedrake
deleted file mode 100644
index cc9b68260..000000000
--- a/perl-install/standalone/localedrake
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-
-use interactive;
-use lang;
-use any;
-
-my $in = 'interactive'->vnew('su');
-
-my ($lang, $langs) = lang::read();
-if ($lang = any::selectLanguage($in, $lang, $langs)) {
-    lang::write('', $lang);
-    lang::write_langs('', $langs);
-}
-
-$in->exit(0);
diff --git a/perl-install/standalone/lsnetdrake b/perl-install/standalone/lsnetdrake
deleted file mode 100755
index 1b2885092..000000000
--- a/perl-install/standalone/lsnetdrake
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-use network::smb;
-use network::nfs;
-
-"@ARGV" =~ /-h/ and die "usage: lsnetdrake [-h] [--nfs] [--smb]\n";
-
-my $nfs = !@ARGV || "@ARGV" =~ /-(nfs)/;
-my $smb = !@ARGV || "@ARGV" =~ /-(smb)/;
-
-$| = 1;
-$ENV{PATH} = "/sbin:/usr/sbin:$ENV{PATH}";
-
-if ($nfs) {
-    my @servers = network::nfs::find_servers();
-    foreach my $server (sort_names(@servers)) {
-	my $server_name = $server->{name} || $server->{ip};
-	foreach (sort_names(network::nfs::find_exports($server))) {
-	    print "$server_name:$_->{name}", $_->{comment} && " ($_->{comment})", "\n";
-	}
-    }
-}
-if ($smb) {
-    my @servers = network::smb::find_servers();
-    foreach my $server (sort_names(@servers)) {
-	my $server_name = $server->{name} || $server->{ip};
-	foreach (sort_names(network::smb::find_exports($server))) {
-	    print "//$server_name/$_->{name}", $_->{comment} && " ($_->{comment})", "\n";
-	}
-    }
-}
-
-sub sort_names { 
-    sort { $a->{name} cmp $b->{name} } @_;
-}
diff --git a/perl-install/standalone/mousedrake b/perl-install/standalone/mousedrake
deleted file mode 100755
index f3609b936..000000000
--- a/perl-install/standalone/mousedrake
+++ /dev/null
@@ -1,76 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-
-use common;
-use interactive;
-use standalone;
-use modules;
-use detect_devices;
-use Xconfig;
-use mouse;
-use c;
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: mousedrake [--auto] [--testing]\n";
-
-$::auto = /-auto/;
-$::testing = /-testing/;
-
-my $in = 'interactive'->vnew('su', 'mouse');
-
--r '/etc/modules.conf' and modules::mergein_conf('/etc/modules.conf');
-
-undef $::Plug;
-begin:
-my ($curr_env) = Xconfig::getinfoFromXF86Config('');
-my ($mouse) = mouse::detect() unless $::noauto;
-my $time_tag2;
-
-#- now try to merge $curr_env->{mouse} with $mouse.
-$mouse->{XMOUSETYPE} eq $curr_env->{mouse}{XMOUSETYPE} ||
-    $mouse->{XMOUSETYPE} eq 'PS/2' && ($curr_env->{mouse}{XMOUSETYPE} =~ m|PS/2| ||
-				       $curr_env->{mouse}{auxmouse}{XMOUSETYPE} =~ m|PS/2|) and $mouse = $curr_env->{mouse};
-
-$::isEmbedded and kill USR2, $::CCPID;
-if (!$mouse || !$::auto) {
-    $mouse ||= mouse::fullname2mouse("serial|Generic 2 Button Mouse");
-    if ($::isEmbedded && $in->isa('interactive_gtk')) {
-	require my_gtk;
-	my $time_tag = Gtk->timeout_add(100, sub {
-					    defined $::Plug && defined $::Plug->child or return 1;
-					    mouse::test_mouse_standalone($mouse,$::Plug->child);
-					    0;
-					});
-    }
-    my $name = $in->ask_from_treelistf('mousedrake', _("Please, choose the type of your mouse."), '|',
-				       sub { join '|', map { translate($_) } split '\|', $_[0] },
-				       [ mouse::fullnames ], 
-				       $mouse->{type} . '|' . $mouse->{name});
-    Gtk->timeout_remove($time_tag2) if $::isEmbedded  && $in->isa('interactive_gtk');
-    $name or $::isEmbedded ? do { kill(USR1, $::CCPID); goto begin } : $in->exit(0);
-    my $mouse_chosen = mouse::fullname2mouse($name);
-    $mouse->{type} eq $mouse_chosen->{type} && $mouse->{name} eq $mouse_chosen->{name} or $mouse = $mouse_chosen;
-
-    if ($mouse->{device} eq "usbmouse") {
-	my ($c) = grep { $_->{driver} =~ /usb-[ou]hci/ } detect_devices::pci_probe(0) or die _("no serial_usb found\n");
-	eval { modules::load($c->{driver}, "serial_usb") };
-    }
-
-    $mouse->{XEMU3} = 'yes' if $mouse->{nbuttons} < 3 && (!$::noauto || $in->ask_yesorno('', _("Emulate third button?"), 1));
-
-    $mouse->{device} = $in->ask_from_listf(_("Mouse Port"),
-					   _("Please choose on which serial port your mouse is connected to."),
-					   \&mouse::serial_port2text,
-					   [ mouse::serial_ports ],
-					   $mouse->{device},
-					  ) || goto begin if $mouse->{type} eq 'serial';
-}
-
-mouse::write_conf($mouse);
--e "/var/lock/subsys/gpm" and system "service", "gpm", "restart";
-
-$::isEmbedded ? kill(USR1, $::CCPID) : $in->exit(0);
-goto begin;
diff --git a/perl-install/standalone/net_monitor b/perl-install/standalone/net_monitor
deleted file mode 100755
index 2c503a860..000000000
--- a/perl-install/standalone/net_monitor
+++ /dev/null
@@ -1,519 +0,0 @@
-#!/usr/bin/perl
-
-# Monitor
-
-# Copyright (C) 1999 MandrakeSoft (damien@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use Gtk;
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-use standalone;
-use my_gtk qw(:helpers :wrappers);
-#-use Data::Dumper;
-use common;
-use strict;
-use network::netconnect;
-use network::tools;
-use MDK::Common::Globals "network", qw($in $prefix $connect_file $disconnect_file $connect_prog);
-
-if ("@ARGV" =~ /--help|-h/) {
-    print q(Network & Internet connection and monitoring application
-
---defaultintf interface : show this interface by default
---connect : connect to internet if not already connected
---disconnect : disconnect to internet if already connected
---force : used with (dis)connect : force (dis)connection.
---status : returns 1 if connected 0 otherwise, then exit.
---quiet : don't be interactive. To be used with (dis)connect.
-);
-    exit(0);
-}
-
-if ("@ARGV" =~ /--status/) { print connected(); exit(0) }
-my $force = "@ARGV" =~ /--force/;
-my $quiet = "@ARGV" =~ /--quiet/;
-my $connect = "@ARGV" =~ /--connect/;
-my $disconnect = "@ARGV" =~ /--disconnect/;
-my ($default_intf) = "@ARGV" =~ /--defaultintf (\w+)/;
-
-if ($force) {
-    $connect and system("/etc/sysconfig/network-scripts/net_cnx_up &");
-    $disconnect and system("/etc/sysconfig/network-scripts/net_cnx_down &");
-    $connect = $disconnect = 0;
-}
-$quiet and exit(0);
-init Gtk;
-my $in = 'interactive'->vnew('su', 'default');
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-
-
-my $window1 = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window -toplevel;
-$window1->signal_connect ( delete_event => sub { Gtk->exit(0); });
-$window1->set_position(1);
-$window1->set_title(_("Network Monitoring"));
-$window1->set_policy(1, 1, 1);
-$window1->set_border_width(5);
-#$::isEmbedded or $window1->set_usize(580, 320);
-
-my $colorr = my_gtk::gtkcolor(50400, 655, 20000);
-my $colort = my_gtk::gtkcolor(55400, 55400, 655);
-my $colora = my_gtk::gtkcolor(655, 50400, 655);
-my $isconnected=-1;
-my @interfaces;
-my $monitor = {};
-my $netcnx = {};
-my $netc = {};
-my $intf = {};
-my $c_time = 0;
-my $ct_tag;
-my $style= new Gtk::Style;
-$style->font(Gtk::Gdk::Font->fontset_load("-adobe-times-medium-r-normal-*-12-*-75-75-p-*-iso8859-*,*-r-*"));
-
-network::netconnect::load_conf($netcnx, $netc, $intf);
-network::netconnect::read_net_conf('', $netcnx, $netc);
-my $combo1 = new Gtk::Combo;
-$combo1->set_popdown_strings (network::netconnect::get_profiles() );
-$combo1->entry->set_text($netcnx->{PROFILE} ? $netcnx->{PROFILE} : "default");
-$combo1->entry->set_editable(0);
-MDK::Common::Globals::init(
-			   in => $in,
-			   prefix => '',
-			   connect_file => "/etc/sysconfig/network-scripts/net_cnx_up",
-			   disconnect_file => "/etc/sysconfig/network-scripts/net_cnx_down",
-			   connect_prog => "/etc/sysconfig/network-scripts/net_cnx_pg" );
-
-gtkadd($window1,
-       gtkpack_(new Gtk::VBox(0,5),
-		0, _("Network Monitoring"),
-		1, gtkpack_(new Gtk::HBox(0,5),
-			    1, my $notebook = new Gtk::Notebook,
-			    0, gtkpack_(new Gtk::VBox(0,5),
-					0, gtkadd(gtkset_shadow_type(new Gtk::Frame(_("Settings")), 'etched_out'),
-						  gtkpack__(gtkset_border_width(new Gtk::VBox(0,5),5),
-							    gtkpack__(new Gtk::HBox(0,0),
-								      _("Connection type: "), my $label_cnx_type = new Gtk::Label("")),
-							    gtkpack__(new Gtk::HBox(0,0),
-								      _("Profile "), $combo1)
-							   )
-						 ),
-					1, gtkadd(gtkset_shadow_type(new Gtk::Frame(_("Statistics")), 'etched_out'),
-						  gtkpack__(new Gtk::VBox(0,0),
-						  create_packtable({ col_spacings => 1, row_spacings => 1},
-						   [ "", "instantaneous" , "average"],
-						   [ _("Sending Speed:"), my $label_st = new Gtk::Label(""), my $label_sta=new Gtk::Label("na")],
-						   [ _("Receiving Speed:"),my $label_sr= new Gtk::Label(""), my $label_sra=new Gtk::Label("na")],
-								  ),
-						   gtkpack__(new Gtk::HBox(0,0), "  "._("Connection Time: "), my $label_ct = new Gtk::Label("")),
-							   )
-						 ),
-					0, gtkpack_(new Gtk::HBox(0,5),
-						   1, gtksignal_connect(my $button_connect = gtkset_sensitive(new Gtk::Button(), 0), clicked => \&connection),
-						   0, new Gtk::VSeparator,
-						   0, gtkpack(new Gtk::VBox(0,5),
-							      gtksignal_connect(new Gtk::Button(_("Logs")), clicked => sub {
-							        -e "/usr/sbin/logdrake"
-								  ? system('/usr/sbin/logdrake --file=/var/log/messages &')
-								    : system('/usr/X11R6/bin/xvt -e "tail -f /var/log/messages " &')
-						 }),
-							      gtksignal_connect(my $button_close = new Gtk::Button(_("Close")), clicked => sub { Gtk->exit(0) }),
-							     )
-						  )
-				       )
-			   ),
-		0, my $statusbar = new Gtk::Statusbar
-	       )
-      );
-$window1->show_all;
-$window1->realize;
-$combo1->entry->signal_connect( 'changed', sub {
-				    network::netconnect::set_profile($netcnx, $combo1->entry->get_text());
-				    network::netconnect::load_conf($netcnx, $netc, $intf);
-				    network::netconnect::set_net_conf($netcnx, $netc, $intf);
-				    network::netconnect::read_net_conf('', $netcnx, $netc);
-				});
-my $gct = new Gtk::Gdk::GC($window1->window);
-$gct->set_foreground($colort);
-my $gcr = new Gtk::Gdk::GC($window1->window);
-$gcr->set_foreground($colorr);
-my $gca = new Gtk::Gdk::GC($window1->window);
-$gca->set_foreground($colora);
-my ($pix_c_map, $pix_c_mask) = gtkcreate_png("net_c.png");
-my ($pix_d_map, $pix_d_mask) = gtkcreate_png("net_d.png");
-my ($pix_u_map, $pix_u_mask) = gtkcreate_png("net_u.png");
-$button_connect->add(gtkpack__(new Gtk::VBox(0,3),
-				   my $pix_c = new Gtk::Pixmap($pix_u_map, $pix_u_mask),
-				   my $label_c = new Gtk::Label(_("Wait please"))
-				  ));
-$statusbar->push(1, _("Wait please, testing your connection..."));
-$window1->show_all();
-#$window1->set_policy (1, 1, 1);
-my $time_tag = Gtk->timeout_add(1000, \&rescan);
-my $time_tag2 = Gtk->timeout_add(5000, \&update);
-
-update();
-rescan();
-while ($isconnected == -1) {
-    Gtk->main_iteration while Gtk->events_pending;
-}
-connection() if ($connect && !$isconnected || $disconnect && $isconnected);
-Gtk->main;
-Gtk->exit(0);
-
-my $during_connection;
-sub connection {
-    $during_connection = 1;
-    my $isconnected2 = $isconnected;
-    $button_connect->set_sensitive(0);
-    $button_close->set_sensitive(0);
-    $statusbar->pop(1);
-    $statusbar->push(1, $isconnected2 ? _("Disconnecting from Internet ") : _("Connecting to Internet "));
-    if(!$isconnected2) {
-	$c_time = time();
-	$ct_tag = Gtk->timeout_add(1000, sub {
-				       my ($sec,$min,$hour) = gmtime(time() - $c_time);
-				       my $e = sprintf ("%02d:%02d:%02d", $hour, $min, $sec);
-				       $label_ct->set($e); 1; });
-    } else { Gtk->timeout_remove($ct_tag) }
-    my $nb_point=1;
-    my $tag = Gtk->timeout_add(100, sub {
-				   $statusbar->pop(1);
-				   $statusbar->push(1, ($isconnected2 ? _("Disconnecting from Internet ") : _("Connecting to Internet "))
-						    . join('', map { "." } (1..$nb_point)));
-				   $nb_point++;
-				   1;
-			       });
-    my $netc = {};
-    my $tag2 = Gtk->timeout_add(10000, sub {
-				    Gtk->timeout_remove($tag);
-				    $statusbar->pop(1);
-				    $statusbar->push(1, $isconnected2 ? ( $isconnected ?
-									  _("Disconnection from Internet failed.") :
-									  _("Disconnection from Internet complete.")) :
-						     ( $isconnected ?
-						       _("Connection complete.") :
-						       _("Connection failed.\nVerify your configuration in the Mandrake Control Center."))
-						    );
-				    my $tag3 = Gtk->timeout_add(10000, sub {
-					    $statusbar->pop(1);
-					    $statusbar->push(1, $isconnected ? _("Connected") : _("Not connected"));
-					    0;
-					});
-				    $button_connect->set_sensitive(1);
-				    $button_close->set_sensitive(1);
-				    undef $during_connection;
-				    0;
-				});
-    Gtk->main_iteration while Gtk->events_pending;
-    $tag2 = Gtk->timeout_add(1000, sub { system( $isconnected2 ? "/etc/sysconfig/network-scripts/net_cnx_down &" : "/etc/sysconfig/network-scripts/net_cnx_up &"); 0; });
-}
-
-sub rescan {
-    get_val();
-    foreach(@interfaces) {
-	my $intf = $_;
-	my $recv = $monitor->{$intf}{val}->[0];
-	my $transmit = $monitor->{$intf}{val}->[8];
-	my $refr = $monitor->{$intf}{referencer};
-	my $reft = $monitor->{$intf}{referencet};
-	$monitor->{sr} += $recv - $refr;
-	$monitor->{st} += $transmit - $reft;
-
-	$monitor->{$intf}{recva} += $recv - $refr;
-	$monitor->{$intf}{recvan}++;
-	if ($monitor->{$intf}{recvan} > 9) {
-	    push(@{$monitor->{$intf}{stack_ra}}, $monitor->{$intf}{recva}/10);
-	    $monitor->{$intf}{recva} = $monitor->{$intf}{recvan} = 0;
-	} else { push(@{$monitor->{$intf}{stack_ra}}, -1) }
-	shift @{$monitor->{$intf}{stack_ra}} if @{$monitor->{$intf}{stack_ra}} > 250;
-
-	push(@{$monitor->{$intf}{stack_r}}, $recv - $refr);
-	shift @{$monitor->{$intf}{stack_r}} if @{$monitor->{$intf}{stack_r}} > 250;
-	$monitor->{$intf}{labelr}->set(formatXiB($recv - $monitor->{$intf}{initialr}));
-	$monitor->{$intf}{referencer} = $recv;
-
-	$monitor->{$intf}{transmita} += $transmit - $reft;
-	$monitor->{$intf}{transmitan}++;
-	if ($monitor->{$intf}{transmitan} > 9) {
-	    push(@{$monitor->{$intf}{stack_ta}}, $monitor->{$intf}{transmita}/10);
-	    $monitor->{$intf}{transmita} = $monitor->{$intf}{transmitan} = 0;
-	} else { push(@{$monitor->{$intf}{stack_ta}}, -1) }
-	shift @{$monitor->{$intf}{stack_ta}} if @{$monitor->{$intf}{stack_ta}} > 250;
-
-	push(@{$monitor->{$intf}{stack_t}}, $transmit - $reft);
-	shift @{$monitor->{$intf}{stack_t}} if @{$monitor->{$intf}{stack_t}} > 250;
-	$monitor->{$intf}{labelt}->set(formatXiB($transmit - $monitor->{$intf}{initialt}));
-	$monitor->{$intf}{referencet} = $transmit;
-
-	draw_monitor($monitor->{$intf});
-    }
-    $label_sr->set(formatXiB($monitor->{sr}) . "/s");
-    $label_st->set(formatXiB($monitor->{st}) . "/s");
-    $monitor->{sra} += $monitor->{sr};
-    $monitor->{sta} += $monitor->{st};
-    $monitor->{nba} ++;
-    if($monitor->{nba} > 9) {
-	$label_sra->set(formatXiB($monitor->{sra}/10) . "/s");
-	$label_sta->set(formatXiB($monitor->{sta}/10) . "/s");
-	$monitor->{sra} = 0;
-	$monitor->{sta} = 0;
-	$monitor->{nba} = 0;
-    }
-    $label_cnx_type->set($netcnx->{type});
-    $monitor->{$_} = 0 foreach ('sr', 'st');
-    1;
-}
-
-sub get_val {
-    my @ret;
-    my $a = cat_("/proc/net/dev");
-    $a =~ s/^.*?\n.*?\n//;
-    $a =~ s/^\s*lo:.*?\n//;
-    my @line = split(/\n/, $a);
-    foreach(@line) {
-	s/\s*(\w*)://;
-	my $intf=$1;
-	push (@ret,$intf);
-	$monitor->{$intf}{val} = [split()];
-	$monitor->{$intf}{intf} = $intf;
-    }
-    @ret;
-}
-
-sub change_color {
-    my ($color) = @_;
-    my $window = new Gtk::Window -toplevel;
-    my $doit;
-    $window->signal_connect ( delete_event => sub { Gtk->main_quit() });
-    $window->set_position(1);
-    $window->set_title(_("Color configuration"));
-    $window->set_border_width(5);
-    gtkadd(gtkset_modal($window,1),
-	   gtkpack_(new Gtk::VBox(0,5),
-		    1, my $colorsel = new Gtk::ColorSelection,
-		    0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -end),
-			      gtksignal_connect(new Gtk::Button(_("OK")), clicked => sub { $doit=1; Gtk->main_quit() }),
-			      gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub { Gtk->main_quit() }),
-			     )
-		   )
-	  );
-    $colorsel->set_color($color->red()/65535, $color->green()/65535, $color->blue()/65535, $color->pixel());
-    $window->show_all();
-    Gtk->main;
-    $window->destroy();
-    $doit or return $color;
-    my (@color) = $colorsel->get_color();
-    my_gtk::gtkcolor($color[0]*65535, $color[1]*65535, $color[2]*65535);
-}
-
-my $scale;
-sub update {
-    connected_bg(\$isconnected);
-    my @intfs = get_val();
-    if($combo1->entry->get_text ne ($netcnx->{PROFILE} ? $netcnx->{PROFILE} : "default")) {
-	$combo1->entry->set_text($netcnx->{PROFILE} ? $netcnx->{PROFILE} : "default");
-    }
-    foreach(@intfs) {
-	my $intf = $_;
-	if(!member($intf,@interfaces)) {
-	    $default_intf = $intf;
-	    $monitor->{$intf}{initialr} = $monitor->{$intf}{val}->[0];
-	    $monitor->{$intf}{initialt} = $monitor->{$intf}{val}->[8];
-	    $monitor->{$intf}{darea} = new Gtk::DrawingArea();
-	    $monitor->{$intf}{darea}->set_events(["pointer_motion_mask"]);
-	    $notebook->append_page(gtkshow(my $page = gtkpack_(new Gtk::VBox(0,0),
-					       0, gtkpack__(gtkset_border_width(new Gtk::HBox(0,0), 5),
-							    gtksize($monitor->{$intf}{darea},300, 150)),
-					       0, gtkpack_(new Gtk::HBox(0,0),
-							    1, gtkpack__(new Gtk::VBox(0,0),
-								      gtkpack__(gtkset_border_width(new Gtk::HBox(0,5), 5),
-										   gtksignal_connect(my $button_t = gtkset_relief(new Gtk::Button(), 'none'), clicked => sub {
-													 $colort = change_color($colort);
-													 $gct->set_foreground($colort);
-													 $_[0]->draw(undef);
-												     }),
-										   _("sent: "), $monitor->{$intf}{labelt} = new Gtk::Label("0")),
-								      gtkpack__(gtkset_border_width(new Gtk::HBox(0,5), 5),
-										   gtksignal_connect(my $button_r = gtkset_relief(new Gtk::Button(), 'none'), clicked => sub {
-													 $colorr = change_color($colorr);
-													 $gcr->set_foreground($colorr);
-													 $_[0]->draw(undef);
-												     }),
-										   _("received: "), $monitor->{$intf}{labelr} = new Gtk::Label("0")),
-								      gtkpack__(gtkset_border_width(new Gtk::HBox(0,5), 5),
-										   gtksignal_connect(my $button_a = gtkset_relief(new Gtk::Button(), 'none'), clicked => sub {
-													 $colora = change_color($colora);
-													 $gca->set_foreground($colora);
-													 $_[0]->draw(undef);
-												     }),
-										   _("average"))
-								     ),
-							    0, gtkpack__(gtkset_border_width(new Gtk::VBox(0,0), 5),
-							      gtkadd(gtkset_shadow_type(new Gtk::Frame(_("Local measure")), 'etched_out'),
-								     gtkpack__(gtkset_border_width(new Gtk::VBox(0,0), 5),
-									       gtkpack__(new Gtk::HBox(0,0),
-											 _('sent: '),
-											 my $measure_t = new Gtk::Label("0")
-											),
-									       gtkpack__(new Gtk::HBox(0,0),
-											 _('received: '),
-											 my $measure_r = new Gtk::Label("0")
-											)
-									      )
-									)
-									)
-							  )
-					       )),
-				   new Gtk::Label($intf));
-	    foreach my $i ([$button_t, $gct],[$button_r, $gcr],[$button_a, $gca]) {
-		$i->[0]->add(gtksignal_connect(gtkshow(gtksize(gtkset_usize(new Gtk::DrawingArea(), 10, 10), 10, 10)), expose_event => sub{ $_[0]->window->draw_rectangle ($i->[1], 1, 0, 0, 10, 10)} ));
-	    }
-	    $notebook->set_page($notebook->page_num($page));
-	    $monitor->{$intf}{page}=($notebook->page_num($page));
-	    $monitor->{$intf}{pixmap_db} = new Gtk::Gdk::Pixmap($monitor->{$intf}{darea}->window, 300, 150);
-	    $monitor->{$intf}{referencer} = $monitor->{$intf}{val}->[0];
-	    $monitor->{$intf}{referencet} = $monitor->{$intf}{val}->[8];
-	    $monitor->{$intf}{pixmap_db}->draw_rectangle ($monitor->{$intf}{darea}->style->black_gc, 1, 0, 0, 300, 150);
-	    $monitor->{$intf}{darea}->signal_connect( motion_notify_event =>
-					      sub { my ($w, $e) = @_;
-						    my $x = $e->{'x'} - 50;
-						    my $y = $e->{'y'};
-						    my $received = $x >= 0 ? $monitor->{$intf}{stack_r}[$x] : 0;
-						    my $transmitted = $x >= 0 ? $monitor->{$intf}{stack_t}[$x] : 0;
-						    my $type;
-						    $y * $scale / 150 < $transmitted and $type = _('transmitted');
-						    (150 - $y) * $scale / 150 < $received and $type = _('received');
-						    $measure_r->set(formatXiB($received));
-						    $measure_t->set(formatXiB($transmitted));
-						});
-	    $monitor->{$intf}{darea}->signal_connect( expose_event => sub {
-					$monitor->{$intf}{darea}->window->draw_pixmap ($monitor->{$intf}{darea}->style->bg_gc('normal'),
-								     $monitor->{$intf}{pixmap_db}, 0, 0, 0, 0, 300, 150);
-				    });
-	}
-    }
-    foreach(@interfaces) {
-	my $intf = $_;
-	if(!member($intf,@intfs)) {
-	    $notebook->remove_page($monitor->{$intf}{page});
-	}
-    }
-    @interfaces = @intfs;
-    my $netc={};
-    if ($isconnected != -1 && !$during_connection) {
-	$button_connect->set_sensitive(1);
-	$label_c->set($isconnected ? _("Disconnect") : _("Connect"));
-	$statusbar->pop(1);
-	$statusbar->push(1, $isconnected ? _("Connected") : _("Not connected"));
-	$isconnected ? $pix_c->set($pix_c_map, $pix_c_mask) : $pix_c->set($pix_d_map, $pix_d_mask);
-    }
-    if (!(-e $connect_file && -e $disconnect_file)) {
-	$button_connect->set_sensitive(0);
-	$label_c->set("No internet connection configured");
-    }
-    1;
-}
-
-sub draw_monitor {
-    my ($o) = @_;
-    defined $o->{darea} or return;
-    $o->{pixmap_db}->draw_rectangle ($o->{darea}->style->black_gc, 1, 0, 0, 300, 150);
-    my $maxr = 0;
-    foreach (@{$o->{stack_r}}) { $maxr = $_ if $_>$maxr }
-    my $maxt = 0;
-    foreach (@{$o->{stack_t}}) { $maxt = $_ if $_>$maxt }
-    my $ech = $maxr + $maxt;
-    $ech == 0 and $ech = 1;
-    $scale = $ech;
-    my $step=49;
-    foreach (@{$o->{stack_t}}) {
-	$o->{pixmap_db}->draw_rectangle($gct, 1, $step, 0, 1, $_*150/$ech);
-	$step++;
-    }
-    $step=49;
-    my ($av1, $av2, $last_a);
-    foreach (@{$o->{stack_ta}}) {
-	if($_ != -1) {
-	    if( !defined $av1) { $av1 = $_ } else { defined $av2 or $av2 = $_ }
-	    if ($av1 && $av2) {
-		$o->{pixmap_db}->draw_line($gca, $step-15, $av1*150/$ech, $step-5, $av2*150/$ech);
-		$av1 = $av2;
-		undef $av2;
-		$last_a = $step-50;
-	    }
-	}
-	$step++;
-    }
-    $step=49;
-    foreach (@{$o->{stack_r}}) {
-	$o->{pixmap_db}->draw_rectangle($gcr, 1, $step, 151-$_*150/$ech, 1, $_*150/$ech);
-	$step++;
-    }
-    $step=49;
-    ($av1, $av2) = undef;
-    foreach (@{$o->{stack_ra}}) {
-	if($_ != -1) {
-	    if(!defined $av1) { $av1 = $_ } else { defined $av2 or $av2 = $_ }
-	    if ((defined $av1) && (defined $av2)) {
-		$o->{pixmap_db}->draw_line($gca, $step-15, 151-$av1*150/$ech, $step-5, 151-$av2*150/$ech);
-		$av1 = $av2;
-		undef $av2;
-	    }
-	}
-	$step++;
-    }
-
-    my $switch = 1;
-    my $gcl = new Gtk::Gdk::GC($o->{darea}->window);
-    $gcl->set_foreground($o->{darea}->window->get_colormap->color_white());
-    $gcl->set_line_attributes (1, 'on-off-dash', 'not-last', 'round');
-    for (my $i = 30;$i<=120;$i+=30) {
-	$o->{pixmap_db}->draw_line($gcl, 50, $i, 300, $i);
-	my ($gc2, $text);
-	my ($dif1, $dif2);
-	if ($last_a) {
-	    $dif1 = abs(150-@{$o->{stack_ra}}[$last_a]*150/$ech - $i);
-	    $dif2 = abs(@{$o->{stack_ta}}[$last_a]*150/$ech - $i);
-	} else {
-	    $dif1 = abs(150-@{$o->{stack_r}}[@{$o->{stack_r}}-1]*150/$ech - $i);
-	    $dif2 = abs(@{$o->{stack_t}}[@{$o->{stack_t}}-1]*150/$ech - $i);
-	}
-	if ($dif1 < $dif2) {
-	    $text = formatXiB((150-$i)*$ech/150);
-	    $gc2=$gcr;
-	    my $x_l=5;
-	    if ($i > 30 && $switch) {
-		$o->{pixmap_db}->draw_line($gct, $x_l, 0, $x_l, $i-30);
-		$o->{pixmap_db}->draw_line($gct, $x_l-1, 0, $x_l-1, $i-30);
-		$o->{pixmap_db}->draw_line($gct, $x_l+1, 0, $x_l+1, $i-30);
-		$o->{pixmap_db}->draw_polygon($gct, 1, $x_l-4, $i-30, $x_l+5, $i-30, $x_l, $i-25);
-	    }
-	    if ($switch) {
-		$o->{pixmap_db}->draw_line($gcr, $x_l, 150, $x_l, $i);
-		$o->{pixmap_db}->draw_line($gcr, $x_l-1, 150, $x_l-1, $i);
-		$o->{pixmap_db}->draw_line($gcr, $x_l+1, 150, $x_l+1, $i);
-		$o->{pixmap_db}->draw_polygon($gcr, 1, $x_l-5, $i, $x_l+5, $i, $x_l, $i-6);
-	    }
-	    undef $switch;
-	} else {
-	    $text = formatXiB($i*$ech/150);
-	    $gc2=$gct;
-	}
-	my $w = $style->font->string_width($text);
-	$o->{pixmap_db}->draw_string($style->font, $gc2, 45-$w, $i+5, ($text) );
-    }
-    $o->{darea}->draw(undef);
-}
diff --git a/perl-install/standalone/printerdrake b/perl-install/standalone/printerdrake
deleted file mode 100755
index 0a339adf6..000000000
--- a/perl-install/standalone/printerdrake
+++ /dev/null
@@ -1,71 +0,0 @@
-#!/usr/bin/perl
-
-# printerdrake
-# Copyright (C) 1999 MandrakeSoft (fpons@mandrakesoft.com)
-# Original version for printer configuration from pad.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use lib qw(/usr/lib/libDrakX);
-
-use interactive;
-use standalone;
-use printerdrake;
-use printer;
-use c;
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: printerdrake [--beginner] [--expert] [--auto] [--noauto] [--skiptest] [--testing] [--cups] [--lprng] [--lpd] [--pdq]\n";
-
-$::beginner = /-beginner/;
-$::expert = /-expert/;
-$::auto = /-auto/;
-$::noauto = /-noauto/;
-$::skiptest = /-skiptest/;
-$::testing = /-testing/;
-
-my $printer;
-
-my $in = 'interactive'->vnew('su', 'printer');
-
-my $commandline = $_;
-
-{
-my $w = $in->wait_message('', _("Reading printer data ..."));
-# Get what was installed before
-eval { $printer = printer::getinfo('') };
-# Choose the spooler by command line options
-$commandline =~ /-cups/ and
-    $printer->{SPOOLER} = 'cups' and printer::read_configured_queues($printer);
-$commandline =~ /-lpr/ and 
-    $printer->{SPOOLER} = 'lpd' and printer::read_configured_queues($printer);
-$commandline =~ /-lpd/ and 
-    $printer->{SPOOLER} = 'lpd' and printer::read_configured_queues($printer);
-$commandline =~ /-lprng/ and 
-    $printer->{SPOOLER} ='lprng' and printer::read_configured_queues($printer);
-$commandline =~ /-pdq/ and 
-    $printer->{SPOOLER} = 'pdq' and printer::read_configured_queues($printer);
--r '/etc/modules.conf' and modules::mergein_conf('/etc/modules.conf');
-}
-
-begin:
-$::isEmbedded and kill USR2, $::CCPID;
-
-printerdrake::main($printer, $in, 1);
-
-$::isEmbedded ? kill(USR1, $::CCPID) : $in->exit(0);
-goto begin;
diff --git a/perl-install/standalone/scannerdrake b/perl-install/standalone/scannerdrake
deleted file mode 100755
index ffb61727a..000000000
--- a/perl-install/standalone/scannerdrake
+++ /dev/null
@@ -1,103 +0,0 @@
-#!/usr/bin/perl
-
-# scannerdrake $Id$
-# Yves Duret <yduret at mandrakesoft.com>
-# Copyright (C) 2001 MandrakeSoft
-# 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-use common;
-use standalone;
-use scanner;
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-for (@ARGV) {
-    /^--version$/ and die 'version: $Id$ '."\n";
-    /^--help$/ and die 'logdrake [--version] [--help] [--manual] [--device=dev] [--update-sane=sane_desc_dir] [--update-usbtable] [--dynamic=dev]';
-    /^--update-usbtable$/ and do {scanner::updateScannerDBfromUsbtable(); exit;};
-    /^--update-sane=(.*)$/ and do {scanner::updateScannerDBfromSane($1); exit;};
-    /^--manual$/ and $::Manual=1;
-    /^--dynamic=(.*)$/ and do { dynamic($1); exit;};
-}
-
-$in = 'interactive'->vnew('su', 'default');
-$in->do_pkgs->install('sane-backends', 'xsane', if_($in->do_pkgs->is_installed('gimp'),'xsane-gimp'));
-if ($::Manual) {manual(); quit();}
-my $wait = $in->wait_message(_("Test ports"), _("Detecting devices ..."));
-@f = scanner::findScannerUsbport();
-$wait=undef;
-(@f) ? auto() : manual();
-quit();
-
-sub auto {
-    foreach (@f) { 
-	if (member($_->{val}{DESCRIPTION}), keys %$scanner::scannerDB) {
-	    my $name = $_->{val}{DESCRIPTION};
-	    $name =~ s/\s$//; #some HP entry have a trailing space, i will correct usbtable asap
-	    $in->ask_yesorno('scannerdrake',_("%s found on %s, configuring it ?",$name,$_->{port}),1) or manual();
-	    tryConfScanner($name, $_->{port});
-	}
-    }
-}
-
-sub manual {
-    my $s = $in->ask_from_treelist('scannerdrake', _("Select a scanner"), '|', [keys %$scanner::scannerDB]) or return;
-    # DRIVER usb or scsi
-    #print "$s\n";
-    tryConfScanner($s);
-}
-
-sub dynamic {
-    @f = scanner::findScannerUsbport();
-    foreach (@f) { 
-	if (member($_->{val}{DESCRIPTION}), keys %$scanner::scannerDB) {
-	    my $name = $_->{val}{DESCRIPTION};
-	    $name =~ s/\s$//; #some HP entry have a trailing space, i will correct usbtable asap
-	    scanner::confScanner($name, $_->{port}) unless($scanner::scannerDB->{$model}{flags}{unsupported});
-	}
-    }
-}
-
-sub tryConfScanner {
-    # take care if interactive ouptut is needed (unsupported, parallel..)
-    my ($model, $port) = @_;
-    if ($scanner::scannerDB->{$model}{flags}{unsupported}) {
-	$in->ask_warn('scannerdrake', _("This %s scanner is unsupported", $model));
-	return;
-    }
-    if ($scanner::scannerDB->{$model}{driver} =~ /Parport/) {
-	$in->ask_warn('scannerdrake', _("This %s scanner uses parallel port, which is unsupported for the moment", $model));
-	return;
-    }
-    scanner::confScanner($model,$port);
-}
-
-sub quit {
-    $::isEmbedded ? kill(USR1, $::CCPID) : $in->exit(0);
-}
-
-#-----------------------------------------------
-# $Log$
-# Revision 1.4  2001/11/19 17:39:03  pablo
-# Corrected English errors
-#
-# Revision 1.3  2001/11/19 10:50:37  yduret
-# added dynamic support
-#
-# Revision 1.2  2001/11/12 15:19:54  yduret
-# update
-#
diff --git a/perl-install/standalone/tinyfirewall b/perl-install/standalone/tinyfirewall
deleted file mode 100755
index df01e76e9..000000000
--- a/perl-install/standalone/tinyfirewall
+++ /dev/null
@@ -1,91 +0,0 @@
-#!/usr/bin/perl
-
-# DrakNet
-
-# Copyright (C) 1999 MandrakeSoft (damien@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-use standalone;
-use tinyfirewall;
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-$::isWizard = "@ARGV" =~ /--wizard/;
-$::Wizard_pix_up = "wiz_firewall.png";
-$::Wizard_title = _("Firewalling Configuration");
-
-local $_ = join '', @ARGV;
-
-my $in = 'interactive'->vnew('su', 'default');
-
-$::isEmbedded && $in->isa('interactive_gtk') or goto dd;
-require Gtk;
-init Gtk;
-
-my $window1 = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window -toplevel;
-$window1->signal_connect ( delete_event => sub { Gtk->exit(0); });
-$window1->set_position(1);
-$window1->set_title(_("Firewalling configuration"));
-$window1->border_width(10);
-$::isEmbedded or $window1->set_usize(500, 400);
-my $vbox1 = new Gtk::VBox(0,0);
-$window1->add($vbox1);
-my $hbox1 = new Gtk::HBox(0,0);
-$vbox1->pack_start($hbox1,1,1,0);
-my $label1 = new Gtk::Label("");
-$hbox1->pack_start($label1,1,1,0);
-my $hbox2 = new Gtk::HBox(0,0);
-$vbox1->pack_start($hbox2,1,1,0);
-
-my $bbox1 = new Gtk::HButtonBox;
-$vbox1->pack_start($bbox1,0,0,0);
-$bbox1->set_layout(-end);
-my $button_conf = new Gtk::Button _("Configure");
-$button_conf->signal_connect ( clicked => sub {
-				 system("/usr/sbin/tinyfirewall --wizard");
-				 update();
-			     });
-$bbox1->add($button_conf);
-my $button_ok = new Gtk::Button _("Cancel");
-$button_ok->signal_connect ( clicked => sub {
-				 quit_global();
-			     });
-$bbox1->add($button_ok);
-$window1->show_all();
-update();
-Gtk->main_iteration while Gtk->events_pending;
-$::isEmbedded and kill USR2, $::CCPID;
-Gtk->main;
-Gtk->exit(0);
-
-sub update {
-$label1->set(-e "/etc/rc.d/rc3.d/S05bastille-firewall" ?
-				  _("Firewalling
-
-You already have set up a firewall.
-Click on Configure to change or remove the firewall"):
-				  _("Firewalling
-
-Click on Configure to set up a standard firewall"));
-}
-
-sub quit_global {
-    $::isEmbedded ? kill(USR1, $::CCPID) : Gtk->exit(0);
-}
-
-dd:
-tinyfirewall::main($in);
diff --git a/perl-install/steps.pm b/perl-install/steps.pm
deleted file mode 100644
index 8997210a6..000000000
--- a/perl-install/steps.pm
+++ /dev/null
@@ -1,50 +0,0 @@
-package steps;
-
-use strict;
-use vars qw(%installSteps @orderedInstallSteps);
-use common;
-
-#-######################################################################################
-#- Steps table
-#-######################################################################################
-{
-    my @installStepsFields = qw(text redoable onError hidden needs icon); 
-    #entered reachable toBeDone next done;
-    my @installSteps = (
-  selectLanguage     => [ __("Choose your language"), 1, 1, '', '', 'language' ],
-  selectInstallClass => [ __("Select installation class"), 1, 1, '', '', '' ],
-  setupSCSI          => [ __("Hard drive detection"), 1, 0, '', '', 'harddrive' ],
-  selectMouse        => [ __("Configure mouse"), 1, 1, '', "selectInstallClass", 'mouse' ],
-  selectKeyboard     => [ __("Choose your keyboard"), 1, 1, '', "selectInstallClass", 'keyboard' ],
-  miscellaneous      => [ __("Security"), 1, 1, '!$::expert', '', 'security' ],
-  doPartitionDisks   => [ __("Setup filesystems"), 1, 0, '', "selectInstallClass", 'partition' ],
-  formatPartitions   => [ __("Format partitions"), 1, -1, '$o->{isUpgrade}', "doPartitionDisks", 'partition' ],
-  choosePackages     => [ __("Choose packages to install"), 1, -2, '!$::expert', "formatPartitions", 'partition' ],
-  installPackages    => [ __("Install system"), 1, -1, '', ["formatPartitions", "selectInstallClass"], '' ],
-  setRootPassword    => [ __("Set root password"), 1, 1, '', "installPackages", 'rootpasswd' ],
-  addUser            => [ __("Add a user"), 1, 1, '', "installPackages", 'user' ],
-  configureNetwork   => [ __("Configure networking"), 1, 1, '', "formatPartitions", 'network' ],
-  summary            => [ __("Summary"), 1, 0, '', "installPackages", 'summary' ],
-  configureServices  => [ __("Configure services"), 1, 1, '!$::expert', "installPackages", 'services' ],
-if_((arch() !~ /alpha/) && (arch() !~ /ppc/),
-  createBootdisk     => [ __("Create a bootdisk"), 1, 0, '', "installPackages", 'bootdisk' ],
-),
-  setupBootloader    => [ __("Install bootloader"), 1, 0, '', "installPackages", 'bootloader' ],
-  configureX         => [ __("Configure X"), 1, 1, '', ["formatPartitions", "setupBootloader"], 'X' ],
-  exitInstall        => [ __("Exit install"), 0, 0, '!$::expert && !$::live', '', 'exit' ],
-);
-    for (my $i = 0; $i < @installSteps; $i += 2) {
-	my %h; @h{@installStepsFields} = @{ $installSteps[$i + 1] };
-	$h{next}    = $installSteps[$i + 2];
-	$h{entered} = 0;
-	$h{onError} = $installSteps[$i + 2 * $h{onError}];
-	$h{reachable} = !$h{needs};
-	$installSteps{ $installSteps[$i] } = \%h;
-	push @orderedInstallSteps, $installSteps[$i];
-    }
-    $installSteps{first} = $installSteps[0];
-}
-
-
-#- Wonderful perl :(
-1;
diff --git a/perl-install/swap.pm b/perl-install/swap.pm
deleted file mode 100644
index 7b7597c10..000000000
--- a/perl-install/swap.pm
+++ /dev/null
@@ -1,136 +0,0 @@
-package swap; # $Id$
-
-use diagnostics;
-use strict;
-
-use MDK::Common::DataStructure;
-use common;
-use log;
-use devices;
-use c;
-
-
-my $pagesize = c::getpagesize();
-my $signature_page = "\0" x $pagesize;
-
-# Maximum allowable number of pages in one swap.
-# From 2.2.0 onwards, this depends on how many offset bits
-# the architectures can actually store into the page tables
-# and on 32bit architectures it is limited to 2GB at the
-# same time.
-# Old swap format keeps the limit of 8*pagesize*(pagesize - 10)
-
-my $V0_MAX_PAGES = 8 * $pagesize - 10;
-my $V1_OLD_MAX_PAGES = int 0x7fffffff / $pagesize - 1;
-my $V1_MAX_PAGES = $V1_OLD_MAX_PAGES; #- (1 << 24) - 1;
-my $MAX_BADPAGES = int ($pagesize - 1024 - 128 * $sizeof_int - 10) / $sizeof_int;
-my $signature_format_v1 = "x1024 I I I I125"; #- bootbits, version, last_page, nr_badpages, padding
-
-1;
-
-sub kernel_greater_or_equal($$$) {
-    c::kernel_version() =~ /(\d*)\.(\d*)\.(\d*)/;
-    ($1 <=> $_[0] || $2 <=> $_[1] || $3 <=> $_[2]) >= 0;
-}
-
-sub check_blocks {
-    my ($fd, $version, $nbpages) = @_;
-    my ($last_read_ok, $badpages) = (0, 0);
-    my ($buffer);
-    my $badpages_field_v1 = \substr($signature_page, psizeof($signature_format_v1));
-
-    for (my $i = 0; $i < $nbpages; $i++) {
-
-	$last_read_ok || sysseek($fd, $i * $pagesize, 0) or die "seek failed";
-
-	unless ($last_read_ok = sysread($fd, $buffer, $pagesize)) {
-	    if ($version == 1) {
-		$badpages == $MAX_BADPAGES and die "too many bad pages";
-		vec($$badpages_field_v1, $badpages, $bitof_int) = $i;
-	    }
-	    $badpages++;
-	}
-	vec($signature_page, $i, 1) = to_bool($last_read_ok) if $version == 0;
-    }
-
-    #- TODO: add interface
-
-    $badpages and log::l("$badpages bad pages\n");
-    return $badpages;
-}
-
-sub make($;$) {
-    my ($devicename, $checkBlocks) = @_;
-    my $tmpdev = 0;
-    my $badpages = 0;
-    my ($version, $maxpages);
-
-    $devicename = devices::make($devicename);
-
-    my $nbpages = divide(devices::size($devicename), $pagesize);
-
-    if ($nbpages <= $V0_MAX_PAGES || !kernel_greater_or_equal(2,1,117) || $pagesize < 2048) {
-	$version = 0;
-    } else {
-	$version = 1;
-    }
-
-    $nbpages >= 10 or die "swap area needs to be at least " . (10 * $pagesize / 1024) . "kB";
-
-    -b $devicename or $checkBlocks = 0;
-    my $rdev = (stat $devicename)[6];# or log::l("stat of $devicename failed: $!");
-    $rdev == 0x300 || $rdev == 0x340 and die "$devicename is not a good device for swap";
-
-    sysopen F, $devicename, 2 or die "opening $devicename for writing failed: $!";
-
-    if ($version == 0) { $maxpages = $V0_MAX_PAGES; }
-    elsif (kernel_greater_or_equal(2,2,1)) { $maxpages = $V1_MAX_PAGES; }
-    else { $maxpages = min($V1_OLD_MAX_PAGES, $V1_MAX_PAGES); }
-
-    if ($nbpages > $maxpages) {
-	$nbpages = $maxpages;
-	log::l("warning: truncating swap area to " . ($nbpages * $pagesize / 1024) . "kB");
-    }
-
-    if ($checkBlocks) {
-	$badpages = check_blocks(*F, $version, $nbpages);
-    } elsif ($version == 0) {
-	for (my $i = 0; $i < $nbpages; $i++) { vec($signature_page, $i, 1) = 1; }
-    }
-
-    $version == 0 and !vec($signature_page, 0, 1) and die "bad block on first page";
-    vec($signature_page, 0, 1) = 0;
-
-    $version == 1 and MDK::Common::DataStructure::strcpy($signature_page, pack($signature_format_v1, $version, $nbpages - 1, $badpages));
-
-    my $goodpages = $nbpages - $badpages - 1;
-    $goodpages > 0 or die "all blocks are bad";
-
-    log::l("Setting up swapspace on $devicename version $version, size = " . $goodpages * $pagesize . " bytes");
-
-    MDK::Common::DataStructure::strcpy($signature_page, $version == 0 ? "SWAP-SPACE" : "SWAPSPACE2", $pagesize - 10);
-
-    my $offset = ($version == 0) ? 0 : 1024;
-    sysseek(F, $offset, 0) or die "unable to rewind swap-device: $!";
-
-    syswrite(F, substr($signature_page, $offset)) or die "unable to write signature page: $!";
-
-    #- A subsequent swapon() will fail if the signature is not actually on disk. (This is a kernel bug.)
-    syscall_('fsync', fileno(F)) or die "fsync failed: $!";
-    close F;
-}
-
-sub enable($;$) {
-    my ($devicename, $checkBlocks) = @_;
-    make($devicename, $checkBlocks);
-    swapon($devicename);
-}
-
-sub swapon($) {
-    log::l("swapon called with $_[0]");
-    syscall_('swapon', devices::make($_[0]), 0) or die "swapon($_[0]) failed: $!";
-}
-
-sub swapoff($) {
-    syscall_('swapoff', devices::make($_[0])) or die "swapoff($_[0]) failed: $!";
-}
diff --git a/perl-install/timezone.pm b/perl-install/timezone.pm
deleted file mode 100644
index de7b93af2..000000000
--- a/perl-install/timezone.pm
+++ /dev/null
@@ -1,198 +0,0 @@
-package timezone; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($ntp_servers);
-
-use common;
-use log;
-
-
-sub getTimeZones {
-    my ($prefix) = @_;
-    local *F;
-    open F, "cd $prefix/usr/share/zoneinfo && find [A-Z]* -type f |";
-    my @l = chomp_(<F>);
-    close F or die "cannot list the available zoneinfos";
-    sort @l;
-}
-
-sub read {
-    my ($prefix) = @_;
-    my $f = "$prefix/etc/sysconfig/clock";
-    my %t = getVarsFromSh($f) or return;
-
-    (timezone => $t{ZONE}, UTC => text2bool($t{UTC}));
-}
-
-sub ntp_server {
-    my ($prefix, $server) = @_;
-
-    my $f = "$prefix/etc/ntp.conf";
-    -e $f or return;
-
-    if (@_ > 1) {
-	my $added = 0;
-	substInFile {
-	    if (/^#?\s*server\s+(\S*)/ && $1 ne '127.127.1.0') {
-		$_ = $added ? "#server $1\n" : "server $server\n";
-		$added = 1;
-	    }
-	} $f;
-	output("$prefix/etc/ntp/step-tickers", "$server\n");
-    } else {
-	($server) = grep { $_ ne '127.127.1.0' } map { if_(/^\s*server\s+(\S*)/, $1) } cat_($f);
-    }
-    $server;
-}
-
-sub write {
-    my ($prefix, $t) = @_;
-
-    ntp_server($prefix, $t->{ntp});
-
-    eval { cp_af("$prefix/usr/share/zoneinfo/$t->{timezone}", "$prefix/etc/localtime") };
-    $@ and log::l("installing /etc/localtime failed");
-    setVarsInSh("$prefix/etc/sysconfig/clock", {
-	ZONE => $t->{timezone},
-	UTC  => bool2text($t->{UTC}),
-	ARC  => "false",
-    });
-}
-
-my %l2t = (
-'Afrikaans (South Africa)' => 'Africa/Johannesburg',
-'Arabic' => 'Africa/Cairo',
-'Armenian (Armenia)' => 'Asia/Yerevan',
-'Azeri (Azerbaijan)' => 'Asia/Baku',
-'Belarussian (Belarus)' => 'Europe/Minsk',
-'Bosnian (Bosnia)' => 'Europe/Sarajevo',
-'Brezhoneg (Brittany)' => 'Europe/Paris',
-'Bulgarian (Bulgaria)' => 'Europe/Sofia',
-'Catalan' => 'Europe/Madrid',
-'Chinese Traditional (Taiwan)' => 'Asia/Taipei',
-'Chinese Simplified (China)' => 'Asia/Beijing',
-'Croatian (Bosnia)' => 'Europe/Sarajevo',
-'Croatian (Croatia)' => 'Europe/Zagreb',
-'Cymraeg (Welsh)' => 'Europe/London',
-'Czech' => 'Europe/Prague',
-'Danish (Denmark)' => 'Europe/Copenhagen',
-'Dutch (Netherlands)' => 'Europe/Amsterdam',
-'English (United States)' => 'America/New_York',
-'English (United Kingdom)' => 'Europe/London',
-'Esperanto' => 'Europe/Warsaw',
-'Estonian (Estonia)' => 'Europe/Tallinn',
-'Euskara (Basque)' => 'Europe/Madrid',
-'Finnish (Finland)' => 'Europe/Helsinki',
-'French (France)' => 'Europe/Paris',
-'French (Belgium)' => 'Europe/Brussels',
-'French (Canada)' => 'Canada/Atlantic', # or Newfoundland ? or Eastern ?
-'Gaeilge (Ireland)' => 'Europe/Dublin',
-'Galego' => 'Europe/Madrid',
-'Georgian (Georgia)' => 'Asia/Yerevan',
-'German (Austria)' => 'Europe/Vienna',
-'German (Germany)' => 'Europe/Berlin',
-'Greek (Greece)' => 'Europe/Athens',
-'Greenlandic' => 'Arctic/Longyearbyen',
-'Hebrew (Israel)' => 'Asia/Tel_Aviv',
-'Hungarian (Hungary)' => 'Europe/Budapest',
-'Icelandic (Iceland)' => 'Atlantic/Reykjavik',
-'Indonesian (Indonesia)' => 'Asia/Jakarta',
-'Iranian (Iran)' => 'Asia/Tehran',
-'Italian (Italy)' => 'Europe/Rome',
-#-'Italian (San Marino)' => 'Europe/San_Marino',
-#-'Italian (Vatican)' => 'Europe/Vatican',
-#-'Italian (Switzerland)' => 'Europe/Zurich',
-'Japanese (Japon)' => 'Asia/Tokyo',
-'Korean (Korea)' => 'Asia/Seoul',
-'Latvian (Latvia)' => 'Europe/Riga',
-'Lithuanian (Lithuania)' => 'Europe/Vilnius',
-'Macedonian (Macedonia)' => 'Europe/Skopje',
-'Maori (New Zealand)' => 'Australia/Sydney',
-'Norwegian (Bokmaal)' => 'Europe/Oslo',
-'Norwegian (Nynorsk)' => 'Europe/Oslo',
-'Polish (Poland)' => 'Europe/Warsaw',
-'Portuguese (Brazil)' => 'Brazil/East', # most people live on the east coast
-'Portuguese (Portugal)' => 'Europe/Lisbon',
-'Romanian (Rumania)' => 'Europe/Bucharest',
-'Russian (Russia)' => 'Europe/Moscow',
-'Serbian (Serbia)' => 'Europe/Belgrade',
-'Slovak (Slovakia)' => 'Europe/Bratislava',
-'Slovenian (Slovenia)' => 'Europe/Ljubljana',
-'Spanish (Argentina)' => 'America/Buenos_Aires',
-'Spanish (Mexico)' => 'America/Mexico_City',
-'Spanish (Spain)' => 'Europe/Madrid',
-'Swedish (Sweden)' => 'Europe/Stockholm',
-'Tajik (Tajikistan)' => 'Asia/Dushanbe',
-'Tamil (Sri Lanka)' => 'Asia/Colombo',
-'Tatar' => 'Europe/Minsk',
-'Thai (Thailand)' => 'Asia/Bangkok',
-'Turkish (Turkey)' => 'Europe/Istanbul',
-'Ukrainian (Ukraine)' => 'Europe/Kiev',
-'Uzbek (Uzbekistan)' => 'Asia/Tashkent',
-'Vietnamese (Vietnam)' => 'Asia/Saigon',
-'Walon (Belgium)' => 'Europe/Brussels',
-);
-
-sub fuzzyChoice { 
-    my ($b, $count) = common::bestMatchSentence($_[0], keys %l2t);
-    $count ? $b : '';
-}
-sub bestTimezone { $l2t{fuzzyChoice($_[0])} || 'GMT' }
-
-my %sex = (
-fr_FR => { '[iln]a$' => 1, '[cdilnst]e$' => 1, 'e$' => .8, 'n$' => .1, 'd$' => .05, 't$' => 0 },
-en => { 'a$' => 1, 'o$' => 0, '[ln]$' => .3, '[rs]$' => .2 },
-);
-
-
-sub sexProb($) {
-    local ($_) = @_;
-    my $l = $sex{$ENV{LC_ALL}} or return 0.5;
-
-    my ($prob, $nb) = (0, 0);
-    foreach my $k (keys %$l) {
-	/$k/ and $prob += $l->{$k}, $nb++;
-    }
-    $nb ? $prob / $nb : 0.5;
-}
-
-$ntp_servers = 
-q(Australia (ntp.adelaide.edu.au)
-Australia (ntp.saard.net)
-Australia (time.esec.com.au)
-Canada (ntp.cpsc.ucalgary.ca)
-Canada (ntp1.cmc.ec.gc.ca)
-Canada (ntp2.cmc.ec.gc.ca)
-Canada (time.chu.nrc.ca)
-Canada (time.nrc.ca)
-Canada (timelord.uregina.ca)
-Spain (slug.ctv.es)
-France (ntp.univ-lyon1.fr)
-Croatia (zg1.ntp.carnet.hr)
-Croatia (zg2.ntp.carnet.hr)
-Croatia (st.ntp.carnet.hr)
-Croatia (ri.ntp.carnet.hr)
-Croatia (os.ntp.carnet.hr)
-Indonesia (ntp.incaf.net)
-Korea, republic of (time.nuri.net)
-Norway (fartein.ifi.uio.no)
-Russia (ntp.landau.ac.ru)
-Singapore (ntp.shim.org)
-Slovenia (time.ijs.si)
-Slovenia (time.ijs.si)
-United kingdom (ntp.cs.strath.ac.uk)
-United kingdom (ntp2a.mcc.ac.uk)
-United kingdom (ntp2b.mcc.ac.uk)
-United kingdom (ntp2c.mcc.ac.uk)
-United kingdom (ntp2d.mcc.ac.uk)
-United states DE (louie.udel.edu)
-United states IL (ntp-0.cso.uiuc.edu)
-United states IL (ntp-1.cso.uiuc.edu)
-United states IL (ntp-2.cso.uiuc.edu)
-United states IN (gilbreth.ecn.purdue.edu)
-United states IN (harbor.ecn.purdue.edu)
-United states IN (molecule.ecn.purdue.edu)
-);
-
-1;
diff --git a/perl-install/tinyfirewall.pm b/perl-install/tinyfirewall.pm
deleted file mode 100644
index 32a745094..000000000
--- a/perl-install/tinyfirewall.pm
+++ /dev/null
@@ -1,245 +0,0 @@
-package tinyfirewall;
-use diagnostics;
-use strict;
-use run_program;
-use network::netconnect;
-use network;
-use POSIX qw(tmpnam);
-use MDK::Common;
-my @messages = (_("tinyfirewall configurator
-
-This configures a personal firewall for this Mandrake Linux machine.
-For a powerful dedicated firewall solution, please look to the
-specialized MandrakeSecurity Firewall distribution."),
-_("We'll now ask you questions about which services you'd like to allow
-the Internet to connect to.  Please think carefully about these
-questions, as your computer's security is important.
-
-Please, if you're not currently using one of these services, firewall
-it off.  You can change this configuration anytime you like by
-re-running this application!"),
-_("Are you running a web server on this machine that you need the whole
-Internet to see? If you are running a webserver that only needs to be
-accessed by this machine, you can safely answer NO here.
-
-"),
-_("Are you running a name server on this machine? If you didn't set one
-up to give away IP and zone information to the whole Internet, please
-answer no.
-
-"),
-_("Do you want to allow incoming Secure Shell (ssh) connections? This
-is a telnet-replacement that you might use to login. If you're using
-telnet now, you should definitely switch to ssh. telnet is not
-encrypted -- so some attackers can steal your password if you use
-it. ssh is encrypted and doesn't allow for this eavesdropping."),
-_("Do you want to allow incoming telnet connections?
-This is horribly unsafe, as we explained in the previous screen. We
-strongly recommend answering No here and using ssh in place of
-telnet.
-"),
-_("Are you running an FTP server here that you need accessible to the
-Internet? If you are, we strongly recommend that you only use it for
-Anonymous transfers. Any passwords sent by FTP can be stolen by some
-attackers, since FTP also uses no encryption for transferring passwords.
-"),
-_("Are you running a mail server here? If you're sending you 
-messages through pine, mutt or any other text-based mail client,
-you probably are.  Otherwise, you should firewall this off.
-
-"),
-_("Are you running a POP or IMAP server here? This would
-be used to host non-web-based mail accounts for people via 
-this machine.
-
-"),
-_("You appear to be running a 2.2 kernel.  If your network IP
-is automatically set by a computer in your home or office 
-(dynamically assigned), we need to allow for this.  Is
-this the case?
-"),
-_("Is your computer getting time syncronized to another computer?
-Mostly, this is used by medium-large Unix/Linux organizations
-to synchronize time for logging and such.  If you're not part
-of a larger office and haven't heard of this, you probably 
-aren't."),
-_("Configuration complete.  May we write these changes to disk?
-
-
-
-")
-);
-my %settings;
-my $config_file = "/etc/Bastille/bastille-firewall.cfg";
-my $default_config_file = "/usr/share/Bastille/bastille-firewall.cfg"; # set this later
-sub ReadConfig {
-    -e $config_file or cp_af($default_config_file, $config_file);
-    add2hash(\%settings, { getVarsFromSh("$config_file") });
-}
-sub SaveConfig {
-	my $tmp_file = tmpnam();
-	open CONFIGFILE, "$config_file"
-		or die _("Can't open %s: %s\n", $config_file, $!);
-	open TMPFILE, ">$tmp_file"
-		or die _("Can't open %s for writing: %s\n", $tmp_file, $!);
-	while (my $line = <CONFIGFILE>)
-	{
-		if ($line =~ m/^(.+)\s*\=\s*\"(.*)\"/)
-		{
-			my ($variable, $value) = ($1, $2);
-			my $newvalue = $settings{$variable};
-			$line =~ s/\".*\"/\"$newvalue\"/
-				if (exists $settings{$variable});
-		}
-		print TMPFILE $line;
-	}
-	close CONFIGFILE;
-	close TMPFILE;
-	rename ($config_file, $config_file . ".orig");
-	system ("/bin/cp $tmp_file $config_file");
-	system ("/bin/rm $tmp_file");
-}
-sub DoInterface {
-    my ($in)=@_;
-    $::isWizard=1;
-    my $GetNetworkInfo = sub {
-	$settings{DNS_SERVERS} = join(' ', uniq(split(' ', $settings{DNS_SERVERS}),
-            @{network::read_resolv_conf("/etc/resolv.conf")}{'dnsServer', 'dnsServer2', 'dnsServer3'}));
-	my (undef, undef, @netstat) = `/bin/netstat -in`;
-	my @interfaces =  map { /(\S+)/ } @netstat;
-	my (@route, undef, undef) = `/sbin/route -n`;
-	my $defaultgw;
-	my $iface;
-	foreach (@route) { my @parts = split /\s+/; $parts[0] eq "0.0.0.0" and $defaultgw = $parts[1], $iface = $parts[7] }
-	my $fulliface = $iface;
-	$fulliface =~ s/[0-9]+/\\\+/;
-	$settings{PUBLIC_INTERFACES} = join(' ', uniq(split(' ', $settings{PUBLIC_INTERFACES}), $iface));
-	$settings{PUBLIC_INTERFACES} =~ $fulliface and $settings{PUBLIC_INTERFACES} =~ s/$iface *//;
-	$settings{INTERNAL_IFACES} = join(' ', uniq(split(' ', $settings{INTERNAL_IFACES}),
-            map { my $i=$_; my $f=$i; $f=~s/[0-9]+/\\\+/;
-		  if_(and_( map {$settings{$_} !~ /$i/ and $settings{$_} !~ /$f/ } ('TRUSTED_IFACES', 'PUBLIC_IFACES', 'INTERNAL_IFACES')), $i)
-	    } @interfaces ));
-    };
-#    my $popimap = sub {	$_[0] or return; $settings{FORCE_PASV_FTP} = 11;  mapn {$settings{"$_[0]"} = "$_[1]"; }
-#[ qw(FORCE_PASV_FTP TCP_BLOCKED_SERVICES UDP_BLOCKED_SERVICES ICMP_ALLOWED_TYPES ENABLE_SRC_ADDR_VERIFY IP_MASQ_NETWORK IP_MASQ_MODULES REJECT_METHOD) ] ,
-#[ "N", "6000:6020", "2049", "destination-unreachable echo-reply time-exceeded" , "Y", "", "", "DENY" ]; };
-    my $popimap = sub {
-	$_[0] or return;
-	$settings{'FORCE_PASV_FTP'} = "N";
-	$settings{TCP_BLOCKED_SERVICES}= "6000:6020";
-	$settings{UDP_BLOCKED_SERVICES}= "2049";
-	$settings{ICMP_ALLOWED_TYPES}= "destination-unreachable echo-reply time-exceeded";
-	$settings{ENABLE_SRC_ADDR_VEIFY}= "Y";
-	$settings{IP_MASQ_NETWORK}= "";
-	$settings{IP_MASQ_MODULES}= "";
-	$settings{REJECT_METHOD}= "DENY";
-    };
-    #    my $ntp = sub { $_[0] or return; mapn { $settings{$_[0]} = $_[1] } ['ICMP_OUTBOUND_DISABLED_TYPES}', 'LOG_FAILURES'], [ "", "N"] };
-    my $ntp = sub { $_[0] or return;
-		    $settings{'ICMP_OUTBOUND_DISABLED_TYPES}'} = "";
-		    $settings{'LOG_FAILURES'} = "N";
-		};
-    my $dhcp = sub { if ($_[0]) {
-	$settings{DHCP_IFACES} and return;
-	my (undef, undef, @netstat) = `/bin/netstat -in`;
-	$settings{DHCP_IFACES} = join(' ', split(' ', $settings{DHCP_IFACES}), map { /(\S+)/ } @netstat );
-    } else { $settings{DHCP_IFACES} = "" } };
-    my $quit = sub {
-	$_[0] or $in->exit(0);
-	SaveConfig();
-	system($_) foreach ("/bin/cp /usr/share/Bastille/bastille-ipchains /usr/share/Bastille/bastille-netfilter /sbin",
-			    "/bin/cp /usr/share/Bastille/bastille-firewall /etc/rc.d/init.d/",
-			    "/bin/chmod 0700 /etc/rc.d/init.d/bastille-firewall", "/bin/chmod 0700 /sbin/bastille-ipchains",
-			    "/bin/chmod 0700 /sbin/bastille-netfilter", "/sbin/chkconfig bastille-firewall on",
-			    "/etc/rc.d/init.d/bastille-firewall stop", "/etc/rc.d/init.d/bastille-firewall start");
-	$in->exit(0);
-	return;
-	$_[0] or $in->exit(0);
-	cp_af($config_file, $config_file . ".orig");
-	substInFile {
-	    if(/^(.+)\s*\=/) {
-		$a=$settings{$1};
-		s/\".*\"/\"$a\"/;
-	    }
-	} $config_file;
-	system($_) foreach ("/bin/cp /usr/share/Bastille/bastille-ipchains /usr/share/Bastille/bastille-netfilter /sbin",
-			    "/bin/cp /usr/share/Bastille/bastille-firewall /etc/rc.d/init.d/",
-			    "/bin/chmod 0700 /etc/rc.d/init.d/bastille-firewall", "/bin/chmod 0700 /sbin/bastille-ipchains",
-			    "/bin/chmod 0700 /sbin/bastille-netfilter", "/sbin/chkconfig bastille-firewall on",
-			    "/etc/rc.d/init.d/bastille-firewall stop", "/etc/rc.d/init.d/bastille-firewall start"); };
-    my @struct = (
-		  [$GetNetworkInfo],
-		  [],
-		  [undef , undef, undef, undef, ["tcp", "80"], ["tcp", "443"]],
-		  [undef , undef, undef, undef, ["tcp", "53"], ["udp", "53"]],
-		  [undef , undef, undef, undef, ["tcp", "22"]],
-		  [undef , undef, undef, undef, ["tcp", "23"]],
-		  [undef , undef, undef, undef, ["tcp", "20"],["tcp", "21"]],
-		  [undef , undef, undef, undef, ["tcp", "25"]],
-		  [undef , undef, undef, $popimap, ["tcp", "109"], ["tcp", "110"], ["tcp", "143"]],
-		  [undef , _("No I don't need DHCP"), _("Yes I need DHCP"), $dhcp],
-		  [undef , _("No I don't need NTP"), _("Yes I need NTP"), $ntp ],
-		  [undef , _("Don't Save"), _("Save & Quit"), $quit ]
-		 );
-    if (!Kernel22()) { 
-	pop @struct; pop @struct; pop @struct;
-	@struct = ( @struct, [undef , _("Don't Save"), _("Save & Quit"), $quit ] );
-	$messages[9]=$messages[11];
-    }
-    for (my $i=0;$i<@struct;$i++) {
-	$::Wizard_no_previous = $i == 0;
-	$::Wizard_finished = $i == $#struct;
-	my $l = $struct[$i];
-	@$l or goto ask;
-	if (@$l == 1) {
-	    ($l->[0])->();
-	  ask:
-	    $in->ask_okcancel(_("Firewall Configuration Wizard"), $messages[$i],1) ? next : goto prev;
-	}
-	my $no = $l->[1] ? $l->[1] : _("No (firewall this off from the internet)");
-	my $yes = $l->[2] ? $l->[2] : _("Yes (allow this through the firewall)");
-	if (my $e = $in->ask_from_list_(_("Firewall Configuration Wizard"),
-				       $messages[$i],
-				       [ $yes, $no ], or_( map { $_ && CheckService($_->[0], $_->[1]) } (@$l[4..6])) ? $yes : $no
-				      )) {
-	    map { $_ and Service($e=~/Yes/, $_->[0], $_->[1]) } (@{$struct[$i]}[4..6]);
-	    $struct[$i][3] and $struct[$i][3]->($e=~/Yes/ || $e eq _("Save & Quit"));
-	} else {
-	  prev:
-	    $i = $i-2 >= -1 ? $i-2 : -1;
-	}
-    }
-}
-sub unbox_service {
-    split ' ', $settings{uc($_[0]) . "_PUBLIC_SERVICES"}
-}
-sub Service {
-    my ($add, $protocol, $port) = @_;
-    my @l = unbox_service($protocol);
-    @l = uniq($add ? (@l, $port) : grep { $_ ne $port } @l);
-    $settings{uc($protocol) . "_PUBLIC_SERVICES"} = join(' ', @l);
-}
-sub CheckService { member($_[1], unbox_service($_[0])); }
-sub Kernel22 {
-    my ($major, $minor, $patchlevel) = (cat_("/proc/version"))[0] =~ m/^Linux version ([0-9]+)\.([0-9]+)\.([0-9]+)/;
-    $major eq "2" && $minor eq "2";
-}
-sub main {
-    my ($in)=@_;
-    my $dialog = new Gtk::Dialog();
-    $dialog->set_position(1);
-    $dialog->vbox->set_border_width(10);
-    my $label = new Gtk::Label(_("Please Wait... Verifying installed packages"));
-    $dialog->signal_connect ( delete_event => sub { Gtk->main_quit(); });
-    $dialog->vbox->pack_start($label,1,1,20);
-    $dialog->show_all;
-    Gtk->main_iteration while Gtk->events_pending;
-    if (!$in->do_pkgs->install(Kernel22() ? "ipchains" : "iptables", "Bastille")) {
-	$in->ask_warn('', _("Failure installing the needed packages : %s and Bastille.
- Try to install them manually.", Kernel22() ? "ipchains" : "iptables") );
-	$dialog->destroy;
-	$in->exit(0);
-    }
-    ReadConfig;
-    DoInterface($in);
-}
diff --git a/perl-install/unused/.cvsignore b/perl-install/unused/.cvsignore
deleted file mode 100644
index 72e8ffc0d..000000000
--- a/perl-install/unused/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-*
diff --git a/perl-install/unused/cdrom.pm b/perl-install/unused/cdrom.pm
deleted file mode 100644
index 040ac7e98..000000000
--- a/perl-install/unused/cdrom.pm
+++ /dev/null
@@ -1,41 +0,0 @@
-package cdrom; # $Id$
-
-use diagnostics;
-use strict;
-
-use detect_devices;
-
-
-my %transTable = ( cm206 => 'cm206cd', sonycd535 => 'cdu535');
-
-1;
-
-
-sub setupCDdevicePanel {
-    my ($type) = @_;
-}
-
-sub findAtapi {
-    my $ide = ideGetDevices();
-    foreach (@$ide) { $_->{type} eq 'cdrom' and return $_->{device} }
-    error();
-}
-
-sub findSCSIcdrom {
-    detect_devices::isSCSI() or return error();
-    my $scsi = detect_devices::getSCSI();
-    foreach (@$scsi) { $_->{type} eq 'cdrom' and return $_->{device} }
-    error();
-}
-
-sub setupCDdevice {
-    my ($cddev, $dl) = @_;
-    #-TODO
-}
-
-sub removeCDmodule {
-    #- this wil fail silently if no CD module has been loaded
-    removeDeviceDriver('cdrom');
-    1;
-}
-
diff --git a/perl-install/unused/christmas-karaoke.patch b/perl-install/unused/christmas-karaoke.patch
deleted file mode 100644
index 1311f7eba..000000000
--- a/perl-install/unused/christmas-karaoke.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-Index: Makefile
-===================================================================
-RCS file: /home/cvs/cooker/gi/perl-install/Makefile,v
-retrieving revision 1.151
-diff -u -r1.151 Makefile
---- Makefile	2000/12/19 18:21:05	1.151
-+++ Makefile	2000/12/20 23:29:33
-@@ -44,7 +44,7 @@
- 
- 	cp share/*.rc $(DESTREP4PMS)
- 	install -d $(DESTREP4PMS)/po
--	cp -f share/po/*.po* $(DESTREP4PMS)/po ||:
-+#	cp -f share/po/*.po* $(DESTREP4PMS)/po ||:
- 	chmod a+x $(DESTREP4PMS)/install2
- 	chmod a+x $(DESTREP4PMS)/commands
- 	chmod a+x $(DESTREP4PMS)/standalone/*
-@@ -61,6 +61,21 @@
- 	cat `../tools/specific_arch share/list` >> /tmp/list
- 	find auto -follow -name "*.so" >> /tmp/list
- 
-+	rpm -ql icewm-light | grep /usr/X11R6 >> /tmp/list
-+	rpm -ql xmms libao0 | grep /usr/lib >> /tmp/list
-+	echo /sbin/isapnp >> /tmp/list
-+	echo /sbin/pnpdump >> /tmp/list
-+	echo /usr/sbin/sndconfig >> /tmp/list
-+	echo /usr/bin/vim >> /tmp/list
-+	echo /usr/bin/aumix >> /tmp/list
-+	echo /usr/bin/ogg123 >> /tmp/list
-+	echo /usr/bin/qiv >> /tmp/list
-+	echo /usr/lib/libimlib-jpeg.so >> /tmp/list
-+	echo /usr/bin/xmms >> /tmp/list
-+	echo /usr/lib/xmms/Visualization/libxmms_singit.so >> /tmp/list
-+	echo /usr/X11R6/lib/X11/rgb.txt >> /tmp/list
-+	echo /bin/bash >> /tmp/list
-+
- 	for i in $(LOCALFILES) `cat /tmp/list` ; do \
- 		ldd $$i 2>/dev/null | grep "=>" | sed -e 's/.*=> //' -e 's/ .*//' | uniq | sort >> /tmp/list; \
- 	done
-@@ -106,6 +121,7 @@
- 	    fi; \
- 	done
- 	mv -f $(DEST)/lib/libimlib-png.so $(DEST)/usr/lib
-+	mv -f $(DEST)/lib/libimlib-jpeg.so $(DEST)/usr/lib
- 
- 	mv -f $(DEST)/bin/* $(DEST)/sbin/* $(DEST)/usr/bin
- 	cd $(DEST)/usr/bin ; mv insmod insmod_
-@@ -135,6 +151,16 @@
- 
- #	echo -e '#!/bin/sh\n\nexec "/usr/bin/sh"' > $(DEST)/usr/bin/runinstall2
- #	chmod a+x $(DEST)/usr/bin/runinstall2
-+
-+	rm -f $(DEST)/usr/X11R6/lib/X11/fonts/{gb16st,k14,taipei16,baekmuk_gulim_12}.pcf.gz
-+	cp -f /usr/X11R6/lib/X11/fonts2/75dpi/helv* $(DEST)/usr/X11R6/lib/X11/fonts/
-+	mkfontdir $(DEST)/usr/X11R6/lib/X11/fonts 2>/dev/null
-+	install $(ROOTDEST)/Mandrake/images/rotate $(DEST)/usr/bin
-+
-+	echo -e "prog xmms xmms xmms\nprog aumix aumix aumix" > $(DEST)/usr/X11R6/lib/X11/icewm/toolbar
-+	echo -e "prog xmms xmms xmms\nprog aumix aumix aumix" > $(DEST)/usr/X11R6/lib/X11/icewm/menu
-+	echo -e "Theme=bluePlastic/default.theme\nTaskBarAutoHide=1" > $(DEST)/usr/X11R6/lib/X11/icewm/preferences
-+
- 
- ifeq (i386,$(ARCH))
- 	cp -a /etc/pcmcia $(DEST)/etc
-Index: install_steps_gtk.pm
-===================================================================
-RCS file: /home/cvs/cooker/gi/perl-install/install_steps_gtk.pm,v
-retrieving revision 1.171
-diff -u -r1.171 install_steps_gtk.pm
---- install_steps_gtk.pm	2000/12/20 21:57:35	1.171
-+++ install_steps_gtk.pm	2000/12/20 23:29:33
-@@ -99,6 +99,27 @@
- 	}
-     }
-   OK:
-+    keyboard::setup("fr");
-+    commands::mknod("/dev/dsp", "c", 14, 3);
-+    commands::mknod("/dev/mixer", "c", 14, 0);
-+    if (!$::expert) {
-+	if (!modules::load_thiskind("sound")) {
-+	    eval {
-+		symlink "/usr/bin/pnpdump", "/sbin/pnpdump";
-+		run_program::run("sndconfig", "--quiet");
-+		run_program::run("isapnp", "/etc/isapnp.conf");
-+		my @l = cat_("/etc/modules.conf");
-+		my $module; /alias sound-slot-0 (\S+)/ and $module = $1 foreach @l;
-+		my @options; /options\s+$module\s+(.*)/ and @options = split ' ', $1 foreach @l;
-+		modules::load($module, 'sound', @options);
-+	    }
-+	}
-+    }
-+    symlink "/tmp/rhimage/lyrics", "/lyrics";
-+    symlink "/tmp/rhimage", "/Sound";
-+    fork or exec "rotate /tmp/rhimage/Mandrake/images" or die;
-+    fork or exec $_ or die foreach "xmms";
-+    exec "icewm-light" or die;
-     install_gtk::init_sizes();
-     install_gtk::default_theme($o);
-     install_gtk::create_logo_window($o);
-Index: interactive_gtk.pm
-===================================================================
-RCS file: /home/cvs/cooker/gi/perl-install/interactive_gtk.pm,v
-retrieving revision 1.94
-diff -u -r1.94 interactive_gtk.pm
---- interactive_gtk.pm	2000/12/18 19:36:04	1.94
-+++ interactive_gtk.pm	2000/12/20 23:29:33
-@@ -351,6 +351,9 @@
- 		   $ok
- 		   ));
-     widget($widgets[0],$val->[0])->grab_focus();
-+
-+#    mapn { $_[0]{expert} and $_[1]->hide } $val, \@widgets, $l;
-+
-     if ($hcallback{complete}) {
- 	my $callback = sub {
- 	    my ($error, $focus) = &{$hcallback{complete}};
diff --git a/perl-install/unused/dns.pm b/perl-install/unused/dns.pm
deleted file mode 100644
index 5e6bb5f5b..000000000
--- a/perl-install/unused/dns.pm
+++ /dev/null
@@ -1,64 +0,0 @@
-use diagnostics;
-use strict;
-
-# This is dumb, but glibc doesn't like to do hostname lookups w/o libc.so
-
-
-#TODO TODO
-sub doQuery {
-#    my ($query, $queryType, $domainName, $ipNum) = @_;
-#
-#    _res.retry = 2;
-#
-#    len = res_search(query, C_IN, queryType, (void *) &response,
-#		     sizeof(response));
-#    if (len <= 0) return -1;
-#
-#    if (ntohs(response.hdr.rcode) != NOERROR) return -1;
-#    ancount = ntohs(response.hdr.ancount);
-#    if (ancount < 1) return -1;
-#
-#    data = response.buf + sizeof(HEADER);
-#    end = response.buf + len;
-#
-#    # skip the question
-#    data += dn_skipname(data, end) + QFIXEDSZ;
-#
-#    # parse the answer(s)
-#    while (--ancount >= 0 && data < end) {
-#
-#      # skip the domain name portion of the RR record
-#      data += dn_skipname(data, end);
-#
-#      # get RR information
-#      GETSHORT(type, data);
-#      data += INT16SZ; # skipp class
-#      data += INT32SZ; # skipp TTL
-#      GETSHORT(len,  data);
-#
-#      if (type == T_PTR) {
-#	 # we got a pointer
-#	 len = dn_expand(response.buf, end, data, name, sizeof(name));
-#	 if (len <= 0) return -1;
-#	 if (queryType == T_PTR && domainName) {
-#	   # we wanted a pointer
-#	   *domainName = malloc(strlen(name) + 1);
-#	   strcpy(*domainName, name);
-#	   return 0;
-#	 }
-#      } else if (type == T_A) {
-#	 # we got an address
-#	 if (queryType == T_A && ipNum) {
-#	   # we wanted an address
-#	   memcpy(ipNum, data, sizeof(*ipNum));
-#	   return 0;
-#	 }
-#      }
-#
-#      # move ahead to next RR
-#      data += len;
-#    }
-#
-#    return -1;
-}
-
diff --git a/perl-install/unused/otherinsmod.pm b/perl-install/unused/otherinsmod.pm
deleted file mode 100644
index 1a8eee9ff..000000000
--- a/perl-install/unused/otherinsmod.pm
+++ /dev/null
@@ -1,26 +0,0 @@
-use diagnostics;
-use strict;
-
-sub insmod {
-
-    @_ or die "usage: insmod <module>.o [params]\n";
-
-    my $file = shift;
-    my $tmpname;
-
-    unless (-r $file) {
-	local *F;
-	open F, "/modules/modules.cgz" or die "error opening /modules/modules.cgz";
-
-	$tmpname = "/tmp/" . basename($file);
-
-	installCpioFile(\*F, $file, $tmpname, 0) or die "error extracting file";
-    }
-
-    my $rc = insmod_main($tmpname || $file, @_);
-
-    unlink($tmpname);
-
-    return $rc;
-}
-sub modprobe { &insmod }
diff --git a/perl-install/unused/scsi.pm b/perl-install/unused/scsi.pm
deleted file mode 100644
index 8e20f7d70..000000000
--- a/perl-install/unused/scsi.pm
+++ /dev/null
@@ -1,104 +0,0 @@
-use diagnostics;
-use strict;
-
-my $scsiDeviceAvailable;
-my $CSADeviceAvailable;
-
-1;
-
-sub scsiDeviceAvailable {
-    defined $scsiDeviceAvailable and return $scsiDeviceAvailable;
-    local *F;
-    open F, "/proc/scsi/scsi" or log::l("failed to open /proc/scsi/scsi: $!"), return 0;
-    foreach (<F>) {
-	/devices: none/ and log::l("no scsi devices are available"), return $scsiDeviceAvailable = 0;
-    }
-    log::l("scsi devices are available");
-    $scsiDeviceAvailable = 1;
-}
-
-sub CompaqSmartArrayDeviceAvailable {
-    defined $CSADeviceAvailable and return $CSADeviceAvailable;
-    -r "/proc/array/ida0" or log::l("failed to open /proc/array/ida0: $!"), return $CSADeviceAvailable = 0;
-    log::l("Compaq Smart Array controllers available");
-    $CSADeviceAvailable = 1;
-}
-
-sub scsiGetDevices {
-    my @drives;
-    my ($driveNum, $cdromNum, $tapeNum) = qw(0 0 0);
-    my $err = sub { chop; log::l("unexpected line in /proc/scsi/scsi: $_"); error() };
-    local $_;
-
-    local *F;
-    open F, "/proc/scsi/scsi" or return &$err();
-    $_ = <F>; /^Attached devices:/ or return &$err();
-    while ($_ = <F>) {
-	my ($id) = /^Host:.*?Id: (\d+)/ or return &$err();
-	$_ = <F>; my ($vendor, $model) = /^\s*Vendor:\s*(.*?)\s+Model:\s*(.*?)\s+Rev:/ or return &$err();
-	$_ = <F>; my ($type) = /^\s*Type:\s*(.*)/ or &$err();
-	my $device;
-	if ($type =~ /Direct-Access/) {
-	    $type = 'hd';
-	    $device = "sd" . chr($driveNum++ + ord('a'));
-	} elsif ($type =~ /Sequential-Access/) {
-	    $type = 'tape';
-	    $device = "st" . $tapeNum++;
-	} elsif ($type =~ /CD-ROM/) {
-	    $type = 'cdrom';
-	    $device = "scd" . $cdromNum++;
-	}
-	$device and push @drives, { device => $device, type => $type, info => "$vendor $model", id => $id, bus => 0 };
-    }
-    [ @drives ];
-}
-
-sub ideGetDevices {
-    my @idi;
-
-    -r "/proc/ide" or die "sorry, /proc/ide not available, seems like you have a pre-2.2 kernel\n => not handled yet :(";
-
-    #- Great. 2.2 kernel, things are much easier and less error prone.
-    foreach my $d (glob_('/proc/ide/hd*')) {
-	my ($t) = chomp_(cat_("$d/media"));
-	my $type = $ {{disk => 'hd', cdrom => 'cdrom', tape => 'tape', floppy => 'fd'}}{$t} or next;
-	my ($info) = chomp_(cat_("$d/model")); $info ||= "(none)";
-
-	my $num = ord (($d =~ /(.)$/)[0]) - ord 'a';
-	push @idi, { type => $type, device => basename($d), info => $info, bus => $num/2, id => $num%2 };
-    }
-    [ @idi ];
-}
-
-
-sub CompaqSmartArrayGetDevices {
-    my @idi;
-    my $f;
-
-    for (my $i = 0; -r ($f = "/proc/array/ida$i"); $i++) {
-	local *F;
-	open F, $f or die;
-	local $_ = <F>;
-	my ($name) = m|ida/(.*?):| or next;
-	push @idi, { device => $name, info => "Compaq RAID logical disk", type => 'hd' };
-    }
-    [ @idi ];
-}
-
-sub dac960GetDevices {
-    my @idi;
-    my $file = "/var/log/dmesg";
-    -r $file or $file = "/tmp/syslog";
-
-    local *F;
-    open F, $file or die "Failed to open $file: $!";
-
-    #- We are looking for lines of this format:DAC960#0:
-    #- /dev/rd/c0d0: RAID-7, Online, 17928192 blocks, Write Thru0123456790123456789012
-    foreach (<F>) {
-	my ($devicename, $info) = m|/dev/rd/(.*?): (.*?),| or next;
-	push @idi, { info => $info, type => 'hd', devicename => $devicename };
-	log::l("DAC960: $devicename: $info");
-    }
-    [ @idi ];
-}
diff --git a/perl-install/verify_c b/perl-install/verify_c
deleted file mode 100755
index b07355b2f..000000000
--- a/perl-install/verify_c
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/usr/bin/perl -n
-
-/^#/ and next;
-/c::to_utf8/ and next;
-/\bc::(\w+)/ and push @c, [ $1, $ARGV, $. ] ;
-
-eof && close ARGV;
-
-END {
-    $_ = join '', `cat c/stuff.xs.pm`; 
-    foreach $c (@c) {
-	/$c->[0]/ or $err = print "$c->[1]:$c->[2]: $c->[0] not in c.xs\n";
-    }
-    exit $err;
-}